The design of operating procedures manuals for nuclear power plants

International Nuclear Information System (INIS)

Bohr, E.; Preuss, W.; Reinartz, G.; Thau, G.

1977-03-01

This report describes the findings of a research on the desirable design of operating procedures manuals for nuclear power plants. The work was supported by a grant of the Federal Department of the Interior. Information was acquired from different sources. Interviews and discussions on manual design were carried out with manual users in nuclear power plants. Moreover, tasks carried out using procedures were either observed or, alternatively, the manner of using procedures was elicited by interviews. In addition, manual writers, managers from manufacturers and utilities, nuclear experts, and individuals involved in manual specification activities were interviewed. A major source of information has been the pertinent scientific and technical findings scattered in the literature on topics such as instructional technology, engineering psychology, psycholinguistics, and typography. A comprehensive bibliography is included. General rules are established on designing instructional material for use on the job, aiming at increasing their legability, comprehensibility, and suitability to guide human performance. The application of these rules to the design of individual operating procedures is demonstrated. Recommendations are given on the design, layout, development and implementation of manuals. (orig.) [de

Phenomenological Research Method, Design and Procedure: A ...

African Journals Online (AJOL)

Phenomenological Research Method, Design and Procedure: A Phenomenological Investigation of the Phenomenon of Being-in-Community as Experienced by Two Individuals Who Have Participated in a Community Building Workshop.

Design Guidance for Computer-Based Procedures for Field Workers

Energy Technology Data Exchange (ETDEWEB)

Oxstrand, Johanna [Idaho National Lab. (INL), Idaho Falls, ID (United States); Le Blanc, Katya [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bly, Aaron [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-09-01

Nearly all activities that involve human interaction with nuclear power plant systems are guided by procedures, instructions, or checklists. Paper-based procedures (PBPs) currently used by most utilities have a demonstrated history of ensuring safety; however, improving procedure use could yield significant savings in increased efficiency, as well as improved safety through human performance gains. The nuclear industry is constantly trying to find ways to decrease human error rates, especially human error rates associated with procedure use. As a step toward the goal of improving field workers’ procedure use and adherence and hence improve human performance and overall system reliability, the U.S. Department of Energy Light Water Reactor Sustainability (LWRS) Program researchers, together with the nuclear industry, have been investigating the possibility and feasibility of replacing current paper-based procedures with computer-based procedures (CBPs). PBPs have ensured safe operation of plants for decades, but limitations in paper-based systems do not allow them to reach the full potential for procedures to prevent human errors. The environment in a nuclear power plant is constantly changing, depending on current plant status and operating mode. PBPs, which are static by nature, are being applied to a constantly changing context. This constraint often results in PBPs that are written in a manner that is intended to cover many potential operating scenarios. Hence, the procedure layout forces the operator to search through a large amount of irrelevant information to locate the pieces of information relevant for the task and situation at hand, which has potential consequences of taking up valuable time when operators must be responding to the situation, and potentially leading operators down an incorrect response path. Other challenges related to use of PBPs are management of multiple procedures, place-keeping, finding the correct procedure for a task, and relying

A procedure for multi-objective optimization of tire design parameters

Directory of Open Access Journals (Sweden)

Nikola Korunović

2015-04-01

Full Text Available The identification of optimal tire design parameters for satisfying different requirements, i.e. tire performance characteristics, plays an essential role in tire design. In order to improve tire performance characteristics, formulation and solving of multi-objective optimization problem must be performed. This paper presents a multi-objective optimization procedure for determination of optimal tire design parameters for simultaneous minimization of strain energy density at two distinctive zones inside the tire. It consists of four main stages: pre-analysis, design of experiment, mathematical modeling and multi-objective optimization. Advantage of the proposed procedure is reflected in the fact that multi-objective optimization is based on the Pareto concept, which enables design engineers to obtain a complete set of optimization solutions and choose a suitable tire design. Furthermore, modeling of the relationships between tire design parameters and objective functions based on multiple regression analysis minimizes computational and modeling effort. The adequacy of the proposed tire design multi-objective optimization procedure has been validated by performing experimental trials based on finite element method.

Novel design of honeybee-inspired needles for percutaneous procedure.

Science.gov (United States)

Sahlabadi, Mohammad; Hutapea, Parsaoran

2018-04-18

The focus of this paper is to present new designs of innovative bioinspired needles to be used during percutaneous procedures. Insect stingers have been known to easily penetrate soft tissues. Bioinspired needles mimicking the barbs in a honeybee stinger were developed for a smaller insertion force, which can provide a less invasive procedure. Decreasing the insertion force will decrease the tissue deformation, which is essential for more accurate targeting. In this study, some design parameters, in particular, barb shape and geometry (i.e. front angle, back angle, and height) were defined, and their effects on the insertion force were investigated. Three-dimensional printing technology was used to manufacture bioinspired needles. A specially-designed insertion test setup using tissue mimicking polyvinyl chloride (PVC) gels was developed to measure the insertion and extraction forces. The barb design parameters were then experimentally modified through detailed experimental procedures to further reduce the insertion force. Different scales of the barbed needles were designed and used to explore the size-scale effect on the insertion force. To further investigate the efficacy of the proposed needle design in real surgeries, preliminary ex vivo insertion tests into bovine liver tissue were performed. Our results show that the insertion force of the needles in different scales decreased by 21-35% in PVC gel insertion tests, and by 46% in bovine liver tissue insertion tests.

Design Procedure on Stud Bolt for Reactor Vessel Assembly

International Nuclear Information System (INIS)

Kim, Jong-Wook; Lee, Gyu-Mahn; Jeoung, Kyeong-Hoon; Kim, Tae-Wan; Park, Keun-Bae; Kim, Keung-Koo

2008-10-01

The reactor pressure vessel flange is welded to the upper part of reactor pressure vessel, and there are stud holes to mount the closure head with stud bolts. The surface mating the closure head is compressed with O-ring, which acts as a sealing gasket to prevent coolant leakage. Bolted flange connections perform a very important structural role in the design of a reactor pressure vessel. Their importance stems from two important functions: (a) maintenance of the structural integrity of the connection itself, and (b) prevention of leakage through the O-ring preloaded by stud bolts. In the present study, an evaluation procedure for the design of stud bolt is developed to meet ASME code requirements. The developed design procedure could provide typical references in the development of advanced reactor design in the future

On the design of flight-deck procedures

Science.gov (United States)

Degani, Asaf; Wiener, Earl L.

1994-01-01

In complex human-machine systems, operations, training, and standardization depend on a elaborate set of procedures which are specified and mandated by the operational management of the organization. The intent is to provide guidance to the pilots, to ensure a logical, efficient, safe, and predictable means of carrying out the mission objectives. In this report the authors examine the issue of procedure use and design from a broad viewpoint. The authors recommend a process which we call 'The Four P's:' philosophy, policies, procedures, and practices. We believe that if an organization commits to this process, it can create a set of procedures that are more internally consistent, less confusing, better respected by the flight crews, and that will lead to greater conformity. The 'Four-P' model, and the guidelines for procedural development in appendix 1, resulted from cockpit observations, extensive interviews with airline management and pilots, interviews and discussion at one major airframe manufacturer, and an examination of accident and incident reports. Although this report is based on airline operations, we believe that the principles may be applicable to other complex, high-risk systems, such as nuclear power production, manufacturing process control, space flight, and military operations.

Development of an optimized procedure bridging design and structural analysis codes for the automatized design of the SMART

International Nuclear Information System (INIS)

Kim, Tae Wan; Park, Keun Bae; Choi, Suhn; Kim, Kang Soo; Jeong, Kyeong Hoon; Lee, Gyu Mahn

1998-09-01

In this report, an optimized design and analysis procedure is established to apply to the SMART (System-integrated Modular Advanced ReacTor) development. The development of an optimized procedure is to minimize the time consumption and engineering effort by squeezing the design and feedback interactions. To achieve this goal, the data and information generated through the design development should be directly transferred to the analysis program with minimum operation. The verification of the design concept requires considerable effort since the communication between the design and analysis involves time consuming stage for the conversion of input information. In this report, an optimized procedure is established bridging the design and analysis stage utilizing the IDEAS, ABAQUS and ANSYS. (author). 3 refs., 2 tabs., 5 figs

Improved Design of Crew Operation in Computerized Procedure System of APR1400

Energy Technology Data Exchange (ETDEWEB)

Seong, No Kyu; Jung, Yeon Sub; Sung, Chan Ho [KHNP, Daejeon (Korea, Republic of)

2016-05-15

The operators perform the paper-based procedures in analog-based conventional main control room (MCR) depending on only communications between operators except a procedure controller such as a Shift Supervisor (SS), however in digital-based MCR the operators can confirm the procedures simultaneously in own console when the procedure controller of computerized procedure (CP) opens the CP. The synchronization and a synchronization function between procedure controller and other operators has to be considered to support the function of crew operation. This paper suggests the improved design of crew operation in computerized procedure system of APR1400. This paper suggests the improved design of APR1400 CPS. These improvements can help operators perform the crew procedures more efficiently. And they reduce a burden of communication and misunderstanding of computerized procedures. These improvements can be applied to CPS after human factors engineering verification and validation.

LASL lens design procedure: simple, fast, precise, versatile

International Nuclear Information System (INIS)

Brixner, B.

1978-11-01

The Los Alamos Scientific Laboratory general-purpose lens design procedure optimizes specific lens prescriptions to obtain the smallest possible image spots and therefore near-spherical wave fronts of light converging on all images in the field of view. Optical image errors are analyzed in much the same way that they are measured on the optical bench. This lens design method is made possible by using the full capabilities of large electronic computers. First, the performance of the whole lens is sampled with many precisely traced skew rays. Next, lens performance is analyzed with spot diagrams generated by the many rays. Third, lens performance is optimized with a least squares system aimed at reducing all image errors to zero. This statistical approach to lens design uses skew rays and precisely measured ray deviations from ideal image points to achieve greater accuracy than was possible with the classical procedure, which is based on approximate expressions derived from simplified ray traces developed for pencil-and-paper calculations

Development of structural design procedure of plate-fin heat exchanger for HTGR

Energy Technology Data Exchange (ETDEWEB)

Mizokami, Yorikata, E-mail: yorikata_mizokami@mhi.co.jp [Mitsubishi Heavy Industries, Ltd., 1-1, Wadasaki-cho 1-Chome, Hyogo-ku, Kobe 652-8585 (Japan); Igari, Toshihide [Mitsubishi Heavy Industries, Ltd., 5-717-1, Fukahori-machi, Nagasaki 851-0392 (Japan); Kawashima, Fumiko [Kumamoto University, 39-1 Kurokami 2-Chome, Kumamoto 860-8555 (Japan); Sakakibara, Noriyuki [Mitsubishi Heavy Industries, Ltd., 5-717-1, Fukahori-machi, Nagasaki 851-0392 (Japan); Tanihira, Masanori [Mitsubishi Heavy Industries, Ltd., 16-5, Konan 2-Chome, Minato-ku, Tokyo 108-8215 (Japan); Yuhara, Tetsuo [The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Hiroe, Tetsuyuki [Kumamoto University, 39-1 Kurokami 2-Chome, Kumamoto 860-8555 (Japan)

2013-02-15

Highlights: ► We propose high temperature structural design procedure for plate-fin heat exchanger ► Allowable stresses for brazed structures will be newly discussed ► Validity of design procedure is confirmed by carrying out partial model tests ► Proposed design procedure is applied to heat exchangers for HTGR. -- Abstract: Highly efficient plate-fin heat exchanger for application to HTGR has been focused on recently. Since this heat exchanger is fabricated by brazing a lot of plates and fins, a new procedure for structural design of brazed structures in the HTGR temperature region up to 950 °C is required. Firstly in this paper influences on material strength due to both thermal aging during brazing process and helium gas environment were experimentally examined, and failure mode and failure limit of brazed side-bar structures were experimentally clarified. Secondly allowable stresses for aging materials and brazed structures were newly determined on the basis of the experimental results. For the purpose of validating the structural design procedure including homogenization FEM modeling, a pressure burst test and a thermal fatigue test of partial model for plate-fin heat exchanger were carried out. Finally, results of reference design of plate-fin heat exchangers of recuperator and intermediate heat exchanger for HTGR plant were evaluated by the proposed design criteria.

A design procedure for the phase-controlled parallel-loaded resonant inverter

Science.gov (United States)

King, Roger J.

1989-01-01

High-frequency-link power conversion and distribution based on a resonant inverter (RI) has been recently proposed. The design of several topologies is reviewed, and a simple approximate design procedure is developed for the phase-controlled parallel-loaded RI. This design procedure seeks to ensure the benefits of resonant conversion and is verified by data from a laboratory 2.5 kVA, 20-kHz converter. A simple phasor analysis is introduced as a useful approximation for design purposes. The load is considered to be a linear impedance (or an ac current sink). The design procedure is verified using a 2.5-kVA 20-kHz RI. Also obtained are predictable worst-case ratings for each component of the resonant tank circuit and the inverter switches. For a given load VA requirement, below-resonance operation is found to result in a significantly lower tank VA requirement. Under transient conditions such as load short-circuit, a reversal of the expected commutation sequence is possible.

Design Procedure for High-Speed PM Motors Aided by Optimization Algorithms

Directory of Open Access Journals (Sweden)

Francesco Cupertino

2018-02-01

Full Text Available This paper considers the electromagnetic and structural co-design of superficial permanent magnet synchronous machines for high-speed applications, with the aid of a Pareto optimization procedure. The aim of this work is to present a design procedure for the afore-mentioned machines that relies on the combined used of optimization algorithms and finite element analysis. The proposed approach allows easy analysis of the results and a lowering of the computational burden. The proposed design method is presented through a practical example starting from the specifications of an aeronautical actuator. The design procedure is based on static finite element simulations for electromagnetic analysis and on analytical formulas for structural design. The final results are validated through detailed transient finite element analysis to verify both electromagnetic and structural performance. The step-by-step presentation of the proposed design methodology allows the reader to easily adapt it to different specifications. Finally, a comparison between a distributed-winding (24 slots and a concentrated-winding (6 slots machine is presented demonstrating the advantages of the former winding arrangement for high-speed applications.

Factors affecting the design of instrument flight procedures

Directory of Open Access Journals (Sweden)

Ivan FERENCZ

2008-01-01

Full Text Available The article highlights factors, which might affect the design of instrument flight procedures. Ishikawa diagram is used to distribute individual factors into classes, as are People, Methods, Regulations, Tools, Data and Environment.

Procedure for seismic evaluation and design of small bore piping

International Nuclear Information System (INIS)

Bilanin, W.; Sills, S.

1991-01-01

Simplified methods for the seismic design of small bore piping in nuclear power plants have teen used for many years. Various number of designers have developed unique methods to treat the large number of class 2 and 3 small bore piping systems. This practice has led to a proliferation of methods which are not standardized in the industry. These methods are generally based on enveloping the results of rigorous dynamic or conservative static analysis and result in an excessive number of supports and unrealistically high support loadings. Experience and test data have become available which warranted taking another look at the present methods for analysis of small bore piping. A recently completed Electric Power Research Institute and NCIG (a utility group) activity developed a new procedure for the seismic design and evaluation of small bore piping which provides significant safety and cost benefits. The procedure streamlines the approach to inertial stresses, which is the main feature that achieves the new benefits. Criteria in the procedure for seismic anchor movement and support design are based analysis and focus the designer on credible failure mechanisms. A walkdown of the as-constructed piping system to identify and eliminate undesirable piping features such as adverse spatial interaction is required

Chipless RFID design procedure and detection techniques

CERN Document Server

Rezaiesarlak, Reza

2015-01-01

This book examines the design of chipless RFID systems. The authors begin with the historical development of wireless identification systems and finally arrive at a representation of the chipless RFID system as a block diagram illustration. Chapter 2 is devoted to the theoretical bases for the design of chipless RFID tags and detection techniques in the reader. A rigorous mathematical formulation is presented based on the singularity expansion method (SEM) and characteristic mode theory (CMT) in order to study the scattered fields from an object in a general form. Th e authors attempt to explain some physical concepts behind the mathematical descriptions of the theories in this chapter. In Chapter 3, two design procedures based on complex natural resonance and CMT are presented for the design of the chipless RFID tag. By studying the effects of structural parameters on radiation and resonant behaviors of the tag, some design conclusions are presented in this chapter. Chapter 4 is dedicated to the time-frequen...

40 CFR 240.205-2 - Recommended procedures: Design.

Science.gov (United States)

2010-07-01

... air pollution control technology. (b) All emissions, including dust from vents, should be controlled. ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.205-2 Section 240.205-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID...

A surrogate based multistage-multilevel optimization procedure for multidisciplinary design optimization

NARCIS (Netherlands)

Yao, W.; Chen, X.; Ouyang, Q.; Van Tooren, M.

2011-01-01

Optimization procedure is one of the key techniques to address the computational and organizational complexities of multidisciplinary design optimization (MDO). Motivated by the idea of synthetically exploiting the advantage of multiple existing optimization procedures and meanwhile complying with

Revised guideline for the approval procedure of package designs in Germany

International Nuclear Information System (INIS)

Nitsche, F.; Roedel, R.

2004-01-01

The IAEA Regulations for the Safe Transport of Radioactive Material, TS-R-1 are applied in Germany through the implementation of the Dangerous Goods Transport Regulations for class 7 of the International Modal Organisations (ADR, RID, IMDG-Code, ICAO-TI). Based on this the approval procedures for packages designs applied in Germany are in compliance with the provisions of TS-R-1. The Guideline R 003 issued by the Ministry of Transport, Building and Housing (BMVBW) in 1991 is the basis for the package design approval procedures in Germany. This Guideline has been reviewed and revised to reflect latest developments in the regulations as well as in the regulatory practice. In particular it has been extended to the approval procedures of Type C packages, packages subject to transitional arrangements, special form and low dispersible radioactive material and provides more detailed information to the applicant about the requested documentation. Publication of this revised guideline has been delayed but it is expected to take place in October 2004. The paper gives an overview about the main parts and provisions of this revised Guideline R 003 with the focus on package design approval procedures

Development of an Overlay Design Procedure for Composite Pavements

Science.gov (United States)

2017-09-01

The composite overlay design procedure currently used by ODOT sometimes produces very large overlay thicknesses that are deemed structurally unnecessary, especially for composite pavements already with thick asphalt overlays. This study was initiated...

Metodika tvorby a využití případových studií ve výuce a formou Open Educational Resources (OER

Directory of Open Access Journals (Sweden)

Jana Dlouhá

2016-04-01

Full Text Available Předložená metodika tvorby regionálních případových studií (PS udržitelného rozvoje pro vysokoškolské vzdělávání má za úkol ukázat, jakým způsobem lze ve výuce využít konkrétní případy z praxe a současně jak rozvíjet výzkumné nástroje relevantní pro místní environmentální problematiku a otázky udržitelného rozvoje území; důraz je přitom kladen na regionální kontext a specifika. Publikace výsledků formou otevřených vzdělávacích zdrojů (tzv. Open Educational Resources, OER umožní využít tyto materiály pro regionálně orientované školství i na nižších stupních vzdělávacího systému, pro prezentaci regionálních zvláštností, a může sloužit též pro podporu dialogu o rozvoji území mezi různými společenskými aktéry.

Procedural Design of Exterior Lighting for Buildings with Complex Constraints

KAUST Repository

Schwarz, Michael

2014-10-01

We present a system for the lighting design of procedurally modeled buildings. The design is procedurally specified as part of the ordinary modeling workflow by defining goals for the illumination that should be attained and locations where luminaires may be installed to realize these goals. Additionally, constraints can be modeled that make the arrangement of the installed luminaires respect certain aesthetic and structural considerations. From this specification, the system automatically generates a lighting solution for any concrete model instance. The underlying, intricate joint optimization and constraint satisfaction problem is approached with a stochastic scheme that operates directly in the complex subspace where all constraints are observed. To navigate this subspace efficaciously, the actual lighting situation is taken into account. We demonstrate our system on multiple examples spanning a variety of architectural structures and lighting designs. Copyright held by the Owner/Author.

A procedure for multi-objective optimization of tire design parameters

OpenAIRE

Nikola Korunović; Miloš Madić; Miroslav Trajanović; Miroslav Radovanović

2015-01-01

The identification of optimal tire design parameters for satisfying different requirements, i.e. tire performance characteristics, plays an essential role in tire design. In order to improve tire performance characteristics, formulation and solving of multi-objective optimization problem must be performed. This paper presents a multi-objective optimization procedure for determination of optimal tire design parameters for simultaneous minimization of strain energy density at two distinctive zo...

Proposed design procedure for transmission shafting under fatigue loading

Science.gov (United States)

Loewenthal, S. H.

1978-01-01

The B106 American National Standards Committee is currently preparing a new standard for the design of transmission shafting. A design procedure, proposed for use in the new standard, for computing the diameter of rotating solid steel shafts under combined cyclic bending and steady torsion is presented. The formula is based on an elliptical variation of endurance strength with torque exhibited by combined stress fatigue data. Fatigue factors are cited to correct specimen bending endurance strength data for use in the shaft formula. A design example illustrates how the method is to be applied.

Revised MITG design, fabrication procedure, and performance predictions

International Nuclear Information System (INIS)

Schock, A.

1983-01-01

The design, analysis, and key features of the Modular Isotopic Thermoelectric Generator (MITG) were described in a 1981 IECEC paper; and the design, fabrication, testing, and post-test analysis of test assemblies simulating prototypical MITG modules were described in preceding papers in these proceedings. These analyses succeeded in identifying and explaining the principal causes of thermal-stress problems encountered in the tests, and in confirming the effectiveness of design changes for alleviating them. The present paper presents additional design improvements for solving these and other problems, and describes new thermoelectric material properties generated by independent laboratories over the past two years. Based on these changes and on a revised fabrication procedure, it presents a reoptimization of the MITG design and computes the power-to-weight ratio for the revised design. That ratio is appreciably lower than the 1981 prediction, primarily because of changes in material properties; but it is still much higher than the specific power of current-generation RTGs

PGSFR Core Thermal Design Procedure to Evaluate the Safety Margin

Energy Technology Data Exchange (ETDEWEB)

Choi, Sun Rock; Kim, Sang-Ji [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

The Korea Atomic Energy Research Institute (KAERI) has performed a SFR design with the final goal of constructing a prototype plant by 2028. The main objective of the SFR prototype plant is to verify the TRU metal fuel performance, reactor operation, and transmutation ability of high-level wastes. The core thermal design is to ensure the safe fuel performance during the whole plant operation. Compared to the critical heat flux in typical light water reactors, nuclear fuel damage in SFR subassemblies arises from a creep induced failure. The creep limit is evaluated based on the maximum cladding temperature, power, neutron flux, and uncertainties in the design parameters, as shown in Fig. 1. In this work, the core thermal design procedures are compared to verify the present PGSFR methodology based on the nuclear plant design criteria/guidelines and previous SFR thermal design methods. The PGSFR core thermal design procedure is verified based on the nuclear plant design criteria/guidelines and previous methods in LWRs and SFRs. The present method aims to directly evaluate the fuel cladding failure and to assure more safety margin. The 2 uncertainty is similar to 95% one-side tolerance limit of 1.96 in LWRs. The HCFs, ITDP, and MCM reveal similar uncertainty propagation for cladding midwall temperature for typical SFR conditions. The present HCFs are mainly employed from the CRBR except the fuel-related uncertainty such as an incorrect fuel distribution. Preliminary PGSFR specific HCFs will be developed by the end of 2015.

Design Procedure of Graphite Components by ASME HTR Codes

Energy Technology Data Exchange (ETDEWEB)

Kang, Ji-Ho; Jo, Chang Keun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In this study, the ASME B and PV Code, Subsection HH, Subpart A, design procedure for graphite components of HTRs was reviewed and the differences from metal materials were remarked. The Korean VHTR has a prismatic core which is made of multiple graphite blocks, reflectors, and core supports. One of the design issues is the assessment of the structural integrity of the graphite components because the graphite is brittle and shows quite different behaviors from metals in high temperature environment. The American Society of Mechanical Engineers (ASME) issued the latest edition of the code for the high temperature reactors (HTR) in 2015. In this study, the ASME B and PV Code, Subsection HH, Subpart A, Graphite Materials was reviewed and the special features were remarked. Due the brittleness of graphites, the damage-tolerant design procedures different from the conventional metals were adopted based on semi-probabilistic approaches. The unique additional classification, SRC, is allotted to the graphite components and the full 3-D FEM or equivalent stress analysis method is required. In specific conditions, the oxidation and viscoelasticity analysis of material are required. The fatigue damage rule has not been established yet.

Design Procedure of Graphite Components by ASME HTR Codes

International Nuclear Information System (INIS)

Kang, Ji-Ho; Jo, Chang Keun

2016-01-01

In this study, the ASME B and PV Code, Subsection HH, Subpart A, design procedure for graphite components of HTRs was reviewed and the differences from metal materials were remarked. The Korean VHTR has a prismatic core which is made of multiple graphite blocks, reflectors, and core supports. One of the design issues is the assessment of the structural integrity of the graphite components because the graphite is brittle and shows quite different behaviors from metals in high temperature environment. The American Society of Mechanical Engineers (ASME) issued the latest edition of the code for the high temperature reactors (HTR) in 2015. In this study, the ASME B and PV Code, Subsection HH, Subpart A, Graphite Materials was reviewed and the special features were remarked. Due the brittleness of graphites, the damage-tolerant design procedures different from the conventional metals were adopted based on semi-probabilistic approaches. The unique additional classification, SRC, is allotted to the graphite components and the full 3-D FEM or equivalent stress analysis method is required. In specific conditions, the oxidation and viscoelasticity analysis of material are required. The fatigue damage rule has not been established yet

Energy conservation aircraft design and operational procedures

Energy Technology Data Exchange (ETDEWEB)

Poisson-Quinton, P.

1978-01-01

The paper reviews studies associated with improved fuel efficiency. Several aircraft design concepts are described including: (1) increases in aerodynamic efficiency through decreased friction drag, parasitic drag, and drag due to lift, (2) structural efficiency and the implementation of composite materials, (3) active control technology, (4) the optimization of airframe-engine integration, and (5) VTOL and STOL concepts. Consideration is also given to operational procedures associated with flight management, terminal-area operations, and the influence of environmental noise constraints on fuel economy.

DECA -- The design change assistant: An application of expert systems concepts to procedure automation

International Nuclear Information System (INIS)

Brtis, J.S.

1993-01-01

Proceduralized engineering reviews required for nuclear power stations result in significant O ampersand M cost's. A method of streamlining procedural reviews (while improving their quality) is to computerize the procedures and associated checklists. DECA, the Design Change Assistant, is an expert system based program that is specifically designed for computerizing procedures. This program improves the effectiveness of engineers in performing engineering design reviews. DECA is a development shell, which allows the computerization of most types of engineering reviews. In addition to computerizing the decision making process, DECA makes it possible to call on electronic information, such as databases or text files, and makes them available to the user to assist in a review. DECA clearly demonstrates the benefits that can accrue by applying expert system technologies to engineering reviews. It results in the following: a well defined process, reduced user training in the use of procedures, improved quality of reviews, a streamlining of the review process through elimination of questions that are not applicable, and high quality documentation of reviews. DECA has been successfully applied to Commonwealth Edison's engineering design review checklists, and is currently in use by Commonwealth Edison

6 CFR 25.6 - Procedures for designation of qualified anti-terrorism technologies.

Science.gov (United States)

2010-01-01

...-terrorism technologies. 25.6 Section 25.6 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY REGULATIONS TO SUPPORT ANTI-TERRORISM BY FOSTERING EFFECTIVE TECHNOLOGIES § 25.6 Procedures for designation of qualified anti-terrorism technologies. (a) Application Procedure. Any person, firm or other...

A Systematic Procedure for the Generation of Cost-Minimized Designs

DEFF Research Database (Denmark)

Becker, Peter W.; Jarkler, Bjorn

1972-01-01

We present a procedure for the generation of cost-minimized designs of circuits and systems. Suppose a designer has decided upon the topology of his product. Also suppose he knows the cost and quality of the different grades of the N components required to implement the product. The designer...... then faces the following problem: How should he proceed to find the combination of grades that will give him the desired manufacturing yield at minimum product cost? We discuss the problem and suggest a policy by which the designer, with a reasonable computational effort, can find a set of ``good...

Controller tuning with evolutionary multiobjective optimization a holistic multiobjective optimization design procedure

CERN Document Server

Reynoso Meza, Gilberto; Sanchis Saez, Javier; Herrero Durá, Juan Manuel

2017-01-01

This book is devoted to Multiobjective Optimization Design (MOOD) procedures for controller tuning applications, by means of Evolutionary Multiobjective Optimization (EMO). It presents developments in tools, procedures and guidelines to facilitate this process, covering the three fundamental steps in the procedure: problem definition, optimization and decision-making. The book is divided into four parts. The first part, Fundamentals, focuses on the necessary theoretical background and provides specific tools for practitioners. The second part, Basics, examines a range of basic examples regarding the MOOD procedure for controller tuning, while the third part, Benchmarking, demonstrates how the MOOD procedure can be employed in several control engineering problems. The fourth part, Applications, is dedicated to implementing the MOOD procedure for controller tuning in real processes.

Design procedure for sizing a submerged-bed scrubber for airborne particulate removal

International Nuclear Information System (INIS)

Ruecker, C.M.; Scott, P.A.

1987-04-01

Performance correlations to design and operate the submerged bed scrubber were developed for various applications. Structural design procedure outlined in this report focuses on off-gas scrubbing for HLW vitrification applications; however, the method is appropriate for other applications

Displacement-Based Seismic Design Procedure for Framed Buildings with Dissipative Braces Part II: Numerical Results

International Nuclear Information System (INIS)

Mazza, Fabio; Vulcano, Alfonso

2008-01-01

For a widespread application of dissipative braces to protect framed buildings against seismic loads, practical and reliable design procedures are needed. In this paper a design procedure based on the Direct Displacement-Based Design approach is adopted, assuming the elastic lateral storey-stiffness of the damped braces proportional to that of the unbraced frame. To check the effectiveness of the design procedure, presented in an associate paper, a six-storey reinforced concrete plane frame, representative of a medium-rise symmetric framed building, is considered as primary test structure; this structure, designed in a medium-risk region, is supposed to be retrofitted as in a high-risk region, by insertion of diagonal braces equipped with hysteretic dampers. A numerical investigation is carried out to study the nonlinear static and dynamic responses of the primary and the damped braced test structures, using step-by-step procedures described in the associate paper mentioned above; the behaviour of frame members and hysteretic dampers is idealized by bilinear models. Real and artificial accelerograms, matching EC8 response spectrum for a medium soil class, are considered for dynamic analyses

Procedure and information displays in advanced nuclear control rooms: experimental evaluation of an integrated design.

Science.gov (United States)

Chen, Yue; Gao, Qin; Song, Fei; Li, Zhizhong; Wang, Yufan

2017-08-01

In the main control rooms of nuclear power plants, operators frequently have to switch between procedure displays and system information displays. In this study, we proposed an operation-unit-based integrated design, which combines the two displays to facilitate the synthesis of information. We grouped actions that complete a single goal into operation units and showed these operation units on the displays of system states. In addition, we used different levels of visual salience to highlight the current unit and provided a list of execution history records. A laboratory experiment, with 42 students performing a simulated procedure to deal with unexpected high pressuriser level, was conducted to compare this design against an action-based integrated design and the existing separated-displays design. The results indicate that our operation-unit-based integrated design yields the best performance in terms of time and completion rate and helped more participants to detect unexpected system failures. Practitioner Summary: In current nuclear control rooms, operators frequently have to switch between procedure and system information displays. We developed an integrated design that incorporates procedure information into system displays. A laboratory study showed that the proposed design significantly improved participants' performance and increased the probability of detecting unexpected system failures.

Rules and procedures for the design and operation of hazardous research equipment

International Nuclear Information System (INIS)

1978-12-01

The manual has been prepared for use by research personnel involved in experiments at the Lawrence Berkeley Laboratory. It contains rules and procedures for the design, test, installation, and operation of hazardous research equipment. Sect. I contains such information as responsibility of experimenters for safety, descriptions of the various Laboratory safety organizations, and enumeration of various services available to experimenters at the Laboratory. Sect. II describes specific rules for the setup and operation of experimental equipment at the Laboratory. Sect. III gives detailed design criteria and procedures for equipment frequently encountered in the high energy physics laboratory

Finite element design procedure for correcting the coining die profiles

Science.gov (United States)

Alexandrino, Paulo; Leitão, Paulo J.; Alves, Luis M.; Martins, Paulo A. F.

2018-05-01

This paper presents a new finite element based design procedure for correcting the coining die profiles in order to optimize the distribution of pressure and the alignment of the resultant vertical force at the end of the die stroke. The procedure avoids time consuming and costly try-outs, does not interfere with the creative process of the sculptors and extends the service life of the coining dies by significantly decreasing the applied pressure and bending moments. The numerical simulations were carried out in a computer program based on the finite element flow formulation that is currently being developed by the authors in collaboration with the Portuguese Mint. A new experimental procedure based on the stack compression test is also proposed for determining the stress-strain curve of the materials directly from the coin blanks.

A task based design procedure and modelling approached for industrial crystallization processes

NARCIS (Netherlands)

Menon, A.R.

2006-01-01

A synthesis-based approach to the design of crystallizers and industrial crystallization processes is introduced in this thesis. An ontology for a task-based design procedure has been developed which breaks the crystallization process into a subset of basic functions (physical tasks) which transform

Criteria procedure development for tender in construction design

Directory of Open Access Journals (Sweden)

Malykha Galina Gennad’evna

Full Text Available This article deals with the problem of criteria optimization in order to objectively evaluate the experience of an applicant (a project organization and the quality of a design product (project documentation. The methodology to be developed is based on introduction of new evaluation criteria (sub-criteria that in conjunction with the applicable criteria specified by the Law on the Contract System will allow developing the optimal procedure to evaluate competitive bids of the participants in tenders and determining the most appropriate candidate, with whom the contract will be further concluded. The article analyzes the existing criteria and their interaction with each other and describes the specifics of tenders for design in the form of open competition. The list decreases to three criteria, such as "contract price", "quality, functional and environmental characteristics of a procurement facility", "qualification of procurement participants, including availability of financial resources, equipment and other material resources necessary for the execution of the contract material resources, the presence of goodwill, professionals and other employees of a certain experience level". However, in order to upgrade the quality of assurance procedures for the design works to be performed, it was decided to apply new evaluation criteria (sub-criteria components, such as "availability of positive findings of the state out-of-departmental examination that are similar to the subject of competition, on a participant in placement of order", "availability of the certificate on approval of architectural and urban planning decisions that are similar to the subject of competition, on a participant in placement of order", "availability of the permit for the commissioning of facilities that are similar to the subject of competition, on a participant in placement of order", "availability of the contract for designer's supervision with a participant in placement of

Increasing spelling achievement: an analysis of treatment procedures utilizing an alternating treatments design.

OpenAIRE

Ollendick, T H; Matson, J L; Esveldt-Dawson, K; Shapiro, E S

1980-01-01

Two studies which examine the effectiveness of spelling remediation procedures are reported. In both studies, an alternating treatment design was employed. In the first study, positive practice overcorrection plus positive reinforcement was compared to positive practice alone and a no-remediation control condition. In the second study, positive practice plus positive reinforcement was compared to a traditional corrective procedure plus positive reinforcement and a traditional procedure when u...

Using mixed methods effectively in prevention science: designs, procedures, and examples.

Science.gov (United States)

Zhang, Wanqing; Watanabe-Galloway, Shinobu

2014-10-01

There is growing interest in using a combination of quantitative and qualitative methods to generate evidence about the effectiveness of health prevention, services, and intervention programs. With the emerging importance of mixed methods research across the social and health sciences, there has been an increased recognition of the value of using mixed methods for addressing research questions in different disciplines. We illustrate the mixed methods approach in prevention research, showing design procedures used in several published research articles. In this paper, we focused on two commonly used mixed methods designs: concurrent and sequential mixed methods designs. We discuss the types of mixed methods designs, the reasons for, and advantages of using a particular type of design, and the procedures of qualitative and quantitative data collection and integration. The studies reviewed in this paper show that the essence of qualitative research is to explore complex dynamic phenomena in prevention science, and the advantage of using mixed methods is that quantitative data can yield generalizable results and qualitative data can provide extensive insights. However, the emphasis of methodological rigor in a mixed methods application also requires considerable expertise in both qualitative and quantitative methods. Besides the necessary skills and effective interdisciplinary collaboration, this combined approach also requires an open-mindedness and reflection from the involved researchers.

Model of Procedure Usage – Results from a Qualitative Study to Inform Design of Computer-Based Procedures

Energy Technology Data Exchange (ETDEWEB)

Johanna H Oxstrand; Katya L Le Blanc

2012-07-01

The nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. As a step toward the goal of improving procedure use performance, researchers, together with the nuclear industry, have been looking at replacing the current paper-based procedures with computer-based procedure systems. The concept of computer-based procedures is not new by any means; however most research has focused on procedures used in the main control room. Procedures reviewed in these efforts are mainly emergency operating procedures and normal operating procedures. Based on lessons learned for these previous efforts we are now exploring a more unknown application for computer based procedures - field procedures, i.e. procedures used by nuclear equipment operators and maintenance technicians. The Idaho National Laboratory, the Institute for Energy Technology, and participants from the U.S. commercial nuclear industry are collaborating in an applied research effort with the objective of developing requirements and specifications for a computer-based procedure system to be used by field operators. The goal is to identify the types of human errors that can be mitigated by using computer-based procedures and how to best design the computer-based procedures to do this. The underlying philosophy in the research effort is “Stop – Start – Continue”, i.e. what features from the use of paper-based procedures should we not incorporate (Stop), what should we keep (Continue), and what new features or work processes should be added (Start). One step in identifying the Stop – Start – Continue was to conduct a baseline study where affordances related to the current usage of paper-based procedures were identified. The purpose of the study was to develop a model of paper based procedure use which will help to identify desirable features for computer based procedure prototypes. Affordances such as note taking, markups

Analysis of half diallel mating designs I: a practical analysis procedure for ANOVA approximation.

Science.gov (United States)

G.R. Johnson; J.N. King

1998-01-01

Procedures to analyze half-diallel mating designs using the SAS statistical package are presented. The procedure requires two runs of PROC and VARCOMP and results in estimates of additive and non-additive genetic variation. The procedures described can be modified to work on most statistical software packages which can compute variance component estimates. The...

Contribution of the ergonomic analysis to the improvement of the design of operating procedures in nuclear power plants

International Nuclear Information System (INIS)

Dien, Y.; Montmayeul, R.

1992-11-01

The design of operating procedures for continuous processes is much too often based on implicit assumptions both concerning the operators and the operating conditions that must be dealt with. The merit of the ergonomic approach to the design of procedures is to take account of the way the various operators actually use operating procedures. The actual use is determined from the analysis of on-site operation (normal and incident operating conditions) and the analysis of full-scale simulators tests (incident operating conditions). The introduction of the ergonomic approach in the procedure design results in new design principles being proposed

SUPPORTING THE INDUSTRY BY DEVELOPING A DESIGN GUIDANCE FOR COMPUTER-BASED PROCEDURES FOR FIELD WORKERS

Energy Technology Data Exchange (ETDEWEB)

Oxstrand, Johanna; LeBlanc, Katya

2017-06-01

The paper-based procedures currently used for nearly all activities in the commercial nuclear power industry have a long history of ensuring safe operation of the plants. However, there is potential to greatly increase efficiency and safety by improving how the human interacts with the procedures, which can be achieved through the use of computer-based procedures (CBPs). A CBP system offers a vast variety of improvements, such as context driven job aids, integrated human performance tools and dynamic step presentation. As a step toward the goal of improving procedure use performance, the U.S. Department of Energy Light Water Reactor Sustainability Program researchers, together with the nuclear industry, have been investigating the possibility and feasibility of replacing current paper-based procedures with CBPs. The main purpose of the CBP research conducted at the Idaho National Laboratory was to provide design guidance to the nuclear industry to be used by both utilities and vendors. After studying existing design guidance for CBP systems, the researchers concluded that the majority of the existing guidance is intended for control room CBP systems, and does not necessarily address the challenges of designing CBP systems for instructions carried out in the field. Further, the guidance is often presented on a high level, which leaves the designer to interpret what is meant by the guidance and how to specifically implement it. The authors developed a design guidance to provide guidance specifically tailored to instructions that are carried out in the field based.

A Survey study on design procedure of Seismic Base Isolation ...

African Journals Online (AJOL)

Adding shear walls or braced frames can decrease the potential damage caused by earthquakes.We can isolate the structures from the ground using the Seismic Base Isolation Systems that is flexible approach to decrease the potential damage. In this research we present information on the design procedure of seismic ...

Computational Modelling in Development of a Design Procedure for Concrete Road

Directory of Open Access Journals (Sweden)

B. Novotný

2000-01-01

Full Text Available The computational modelling plays a decisive part in development of a new design procedure for concrete pavement by quantifying impacts of individual design factors. In the present paper, the emphasis is placed on the modelling of a structural response of the jointed concrete pavement as a system of interacting rectangular slabs transferring wheel loads into an elastic layered subgrade. The finite element plate analysis is combined with the assumption of a linear contact stress variation over triangular elements of the contact region division. The linking forces are introduced to model the load transfer across the joints. The unknown contact stress nodal intensities as well as unknown linking forces are determined in an iterative way to fulfil slab/foundation and slab/slab contact conditions. The temperature effects are also considered and space is reserved for modelling of inelastic and additional environmental effects. It is pointed out that pavement design should be based on full data of pavement stressing, in contradiction to procedures accounting only for the axle load induced stresses.

The use of flow models for design of plant operating procedures

International Nuclear Information System (INIS)

Lind, M.

1982-03-01

The report describe a systematic approach to the design of operating procedures or sequence automatics for process plant control. It is shown how flow models representing the topology of mass and energy flows on different levels of function provide plant information which is important for the considered design problem. The modelling methodology leads to the definition of three categories of control tasks. Two tasks relate to the regulation and control of changes of levels and flows of mass and energy in a system within a defined mode of operation. The third type relate to the control actions necessary for switching operations involved in changes of operating mode. These control tasks are identified for a given plant as part of the flow modelling activity. It is discussed how the flow model deal with the problem of assigning control task precedence in time eg. during start-up or shut-down operations. The method may be a basis for providing automated procedure support to the operator in unforeseen situations or may be a tool for control design. (auth.)

24 CFR 3285.306 - Design procedures for concrete block piers.

Science.gov (United States)

2010-04-01

... piers less than 36 inches high are permitted to be constructed of single, open, or closed-cell concrete... shown in Figure A to this section. (3) The concrete blocks must be stacked with their hollow cells... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Design procedures for concrete...

New procedure to design low radar cross section near perfect isotropic and homogeneous triangular carpet cloaks.

Science.gov (United States)

Sharifi, Zohreh; Atlasbaf, Zahra

2016-10-01

A new design procedure for near perfect triangular carpet cloaks, fabricated based on only isotropic homogeneous materials, is proposed. This procedure enables us to fabricate a cloak with simple metamaterials or even without employing metamaterials. The proposed procedure together with an invasive weed optimization algorithm is used to design carpet cloaks based on quasi-isotropic metamaterial structures, Teflon and AN-73. According to the simulation results, the proposed cloaks have good invisibility properties against radar, especially monostatic radar. The procedure is a new method to derive isotropic and homogeneous parameters from transformation optics formulas so we do not need to use complicated structures to fabricate the carpet cloaks.

Design verification for large reprocessing plants (Proposed procedures)

International Nuclear Information System (INIS)

Rolandi, G.

1988-07-01

In the 1990s, four large commercial reprocessing plants will progressively come into operation: If an effective and efficient safeguards system is to be applied to these large and complex plants, several important factors have to be considered. One of these factors, addressed in the present report, concerns plant design verification. Design verification provides an overall assurance on plant measurement data. To this end design verification, although limited to the safeguards aspects of the plant, must be a systematic activity, which starts during the design phase, continues during the construction phase and is particularly performed during the various steps of the plant's commissioning phase. The detailed procedures for design information verification on commercial reprocessing plants must be defined within the frame of the general provisions set forth in INFCIRC/153 for any type of safeguards related activities and specifically for design verification. The present report is intended as a preliminary contribution on a purely technical level, and focusses on the problems within the Agency. For the purpose of the present study the most complex case was assumed: i.e. a safeguards system based on conventional materials accountancy, accompanied both by special input and output verification and by some form of near-real-time accountancy involving in-process inventory taking, based on authenticated operator's measurement data. C/S measures are also foreseen, where necessary to supplement the accountancy data. A complete ''design verification'' strategy comprehends: informing the Agency of any changes in the plant system which are defined as ''safeguards relevant''; ''reverifying by the Agency upon receiving notice from the Operator on any changes, on ''design information''. 13 refs

Design flood hydrograph estimation procedure for small and fully-ungauged basins

Science.gov (United States)

Grimaldi, S.; Petroselli, A.

2013-12-01

The Rational Formula is the most applied equation in practical hydrology due to its simplicity and the effective compromise between theory and data availability. Although the Rational Formula is affected by several drawbacks, it is reliable and surprisingly accurate considering the paucity of input information. However, after more than a century, the recent computational, theoretical, and large-scale monitoring progresses compel us to try to suggest a more advanced yet still empirical procedure for estimating peak discharge in small and ungauged basins. In this contribution an alternative empirical procedure (named EBA4SUB - Event Based Approach for Small and Ungauged Basins) based on the common modelling steps: design hyetograph, rainfall excess, and rainfall-runoff transformation, is described. The proposed approach, accurately adapted for the fully-ungauged basin condition, provides a potentially better estimation of the peak discharge, a design hydrograph shape, and, most importantly, reduces the subjectivity of the hydrologist in its application.

Seismic Retrofit of Reinforced Concrete Frame Buildings with Hysteretic Bracing Systems: Design Procedure and Behaviour Factor

Directory of Open Access Journals (Sweden)

Antonio Di Cesare

2017-01-01

Full Text Available This paper presents a design procedure to evaluate the mechanical characteristics of hysteretic Energy Dissipation Bracing (EDB systems for seismic retrofitting of existing reinforced concrete framed buildings. The proposed procedure, aiming at controlling the maximum interstorey drifts, imposes a maximum top displacement as function of the seismic demand and, if needed, regularizes the stiffness and strength of the building along its elevation. In order to explain the application of the proposed procedure and its capacity to involve most of the devices in the energy dissipation with similar level of ductility demand, a simple benchmark structure has been studied and nonlinear dynamic analyses have been performed. A further goal of this work is to propose a simplified approach for designing dissipating systems based on linear analysis with the application of a suitable behaviour factor, in order to achieve a widespread adoption of the passive control techniques. At this goal, the increasing of the structural performances due to the addition of an EDB system designed with the above-mentioned procedure has been estimated considering one thousand case studies designed with different combinations of the main design parameters. An analytical formulation of the behaviour factor for braced buildings has been proposed.

A finite element based substructuring procedure for design analysis of large smart structural systems

International Nuclear Information System (INIS)

Ashwin, U; Raja, S; Dwarakanathan, D

2009-01-01

A substructuring based design analysis procedure is presented for large smart structural system using the Craig–Bampton method. The smart structural system is distinctively characterized as an active substructure, modelled as a design problem, and a passive substructure, idealized as an analysis problem. Furthermore, a novel thought has been applied by introducing the electro–elastic coupling into the reduction scheme to solve the global structural control problem in a local domain. As an illustration, a smart composite box beam with surface bonded actuators/sensors is considered, and results of the local to global control analysis are presented to show the potential use of the developed procedure. The present numerical scheme is useful for optimally designing the active substructures to study their locations, coupled structure–actuator interaction and provide a solution to the global design of large smart structural systems

Review: Janice M. Morse & Linda Niehaus (2009). Mixed method design: principles and procedures

OpenAIRE

Öhlen, Joakim

2010-01-01

Mixed-Method-Designs, in denen quantitative und qualitative Methoden Verwendung finden, erfreuen sich zunehmender Beliebtheit für die Untersuchung komplexer Phänomene. Die vorliegende Besprechung beschäftigt sich in diesem Zusammenhang mit dem Buch "Mixed Method Design: Principles and Procedures" von Janice M. MORSE und Linda NIEHAUS, die für solche Designs Kern- und Ergänzungskomponenten zu identifizieren versuchen. Hierzu differenzieren sie zwischen Projekten, die einer eher deduktiven oder...

Development of multidisciplinary design optimization procedures for smart composite wings and turbomachinery blades

Science.gov (United States)

Jha, Ratneshwar

Multidisciplinary design optimization (MDO) procedures have been developed for smart composite wings and turbomachinery blades. The analysis and optimization methods used are computationally efficient and sufficiently rigorous. Therefore, the developed MDO procedures are well suited for actual design applications. The optimization procedure for the conceptual design of composite aircraft wings with surface bonded piezoelectric actuators involves the coupling of structural mechanics, aeroelasticity, aerodynamics and controls. The load carrying member of the wing is represented as a single-celled composite box beam. Each wall of the box beam is analyzed as a composite laminate using a refined higher-order displacement field to account for the variations in transverse shear stresses through the thickness. Therefore, the model is applicable for the analysis of composite wings of arbitrary thickness. Detailed structural modeling issues associated with piezoelectric actuation of composite structures are considered. The governing equations of motion are solved using the finite element method to analyze practical wing geometries. Three-dimensional aerodynamic computations are performed using a panel code based on the constant-pressure lifting surface method to obtain steady and unsteady forces. The Laplace domain method of aeroelastic analysis produces root-loci of the system which gives an insight into the physical phenomena leading to flutter/divergence and can be efficiently integrated within an optimization procedure. The significance of the refined higher-order displacement field on the aeroelastic stability of composite wings has been established. The effect of composite ply orientations on flutter and divergence speeds has been studied. The Kreisselmeier-Steinhauser (K-S) function approach is used to efficiently integrate the objective functions and constraints into a single envelope function. The resulting unconstrained optimization problem is solved using the

Design of test and emergency procedures to improve operator behaviour in French nuclear power plants

International Nuclear Information System (INIS)

Griffon-Fouco, M.; Gomolinski, M.

1982-09-01

The incident analyses performed in French nuclear power plants high-lighted that deficiencies in the design of procedures are frequent causes of human errors. The process for developing new guidelines for the writing of test and emergency procedures is presented: this process is based on operators interviews and observations at the plants or at simulators. The main principles for the writing of procedures are developed. For example: - the elaboration of a procedure for action and of a separate educational procedure, - the coordination of crew responses, - the choice of vocabulary, graphs, flow charts and so on as regards the format. Other complementary actions, such as the training of operators in the use of procedures, are described

Design of test and emergency procedures to improve operator behavior in French nuclear power plants

International Nuclear Information System (INIS)

Griffon-Fouco, M.; Gomolinski, M.

1983-01-01

The incident analyses performed in French nuclear power plants high-lighted that deficiencies in the design of procedures are frequent causes of human errors. The process for developing new guidelines for the writing of test and emergency procedures is presented: this process is based on operators interviews and observations at the plants or at simulators. The main principles for the writing of procedures are developed. For example: the elaboration of a procedure for action and of separate educational procedure; the coordination of crew responses; and the choice of vocabulary, graphs, flow charts and so on as regards the format. Other complementary actions, such as the training of operators in the use of procedures, are described

Review: Janice M. Morse & Linda Niehaus (2009). Mixed Method Design: Principles and Procedures

OpenAIRE

Öhlen, Joakim

2010-01-01

Mixed method design related to the use of a combination of methods, usually quantitative and qualitative, is increasingly used for the investigation of complex phenomena. This review discusses the book, "Mixed Method Design: Principles and Procedures," by Janice M. MORSE and Linda NIEHAUS. A distinctive feature of their approach is the consideration of mixed methods design out of a core and a supplemental component. In order to define these components they emphasize the overall conceptual dir...

A novel gait-based synthesis procedure for the design of 4-bar exoskeleton with natural trajectories

Directory of Open Access Journals (Sweden)

Ramanpreet Singh

2018-01-01

The Translational Potential of this Article: Many hospitals and individuals have used the immobile and portable rehabilitation devices. These devices involve mechanisms, and the design of mechanism plays a vital role in the functioning of these devices; therefore, we have developed a new synthesis procedure for the design of the mechanism. Besides synthesis procedure, a mechanism is developed that can be used in the rehabilitation devices, bipeds, exoskeletons, etc., to benefit the society.

Design procedures of hybrid PV/SMES system

International Nuclear Information System (INIS)

Hamad, Ismail; El-Sayas, M. A.

2006-01-01

This paper presents accurate procedures to determine the design parameters of an autonomous hybrid PV/SMES system. Integrating Superconductive magnetic energy storage as a recent storage technology with photovoltaic power system enhances the PV output utilization during the solar radiation fluctuations period. this is because of SMES fast response to any PV output fluctuation. The load demand is supplied either from PV plant or through SMES or from both. Imposed to the technical and economical constrains, the optimum solar cells area and the proper capacity and rating of SMES system are assessed. Regarding solar radiation profile, clear and cloudy days are accurately considered for investigation. Three indices are suggested to express the cloudy and fluctuations conditions. These indices represent the non-utilized PV energy due to clouds (x), fluctuation period (T f ) and location of fluctuations period(t s t). The incremental changes in the design parameters are computed for any variation in these indices. Differentiation between the role of BS and SMES in affecting the results is determined and quantitatively analyzed. The results of clear day condition with SMES are the bas quantities for these changes. Complete analysis of the most effective parameters is presented. Eventually, mathematical models are deduced for each parameter which assists in predicting its behavior against the independent variable.(Author)

40 CFR 63.8687 - What performance tests, design evaluations, and other procedures must I use?

Science.gov (United States)

2010-07-01

... evaluations, and other procedures must I use? 63.8687 Section 63.8687 Protection of Environment ENVIRONMENTAL... What performance tests, design evaluations, and other procedures must I use? (a) You must conduct each... run must last at least 1 hour. (e) You must use the following equations to determine compliance with...

40 CFR 63.7112 - What performance tests, design evaluations, and other procedures must I use?

Science.gov (United States)

2010-07-01

... evaluations, and other procedures must I use? 63.7112 Section 63.7112 Protection of Environment ENVIRONMENTAL..., design evaluations, and other procedures must I use? (a) You must conduct each performance test in Table... use wet dust suppression to control PM from PSH operations, a visible mist is sometimes generated by...

Defining System Requirements: a critical assessment of the Niam conceptual design procedure

Directory of Open Access Journals (Sweden)

Peta Darke

1995-05-01

Full Text Available Requirements definition is a fundamental activity within information systems development. Social and organisational issues are at the centre of many of the problems experienced during the development and implementation of information systems, and these need to be explored during requirements definition. The NIAM Conceptual Schema Design Procedure (CSDP is a method for identifying and describing information requirements using fact types. This paper discusses some limitations of the information requirements definition step of the CSDP which result from its lack of focus on the socio-organisational dimension of information systems development. Four different approaches to exploring the socio-organisational contexts of systems are discussed. It is proposed that one of these, viewpoint development, be incorporated into the NIAM CSDP to provide a means of exploring and understanding a system's socio organisational context and to ensure that contextual information is a major input to the requirements definition process. This results in an enhanced design procedure. Future and current research areas are identified.

Progress of Design Improvements for APR1400 Computerized Procedure System from HFE V and V results and Design Experience

International Nuclear Information System (INIS)

Lee, Sungjin; Seong, Nokyu

2015-01-01

This study shows major already improved design features from the above three processes and a design proposal for to-be-improving items. APR1400 CPS has been verified and validated by the HFE process, internal design review and site acceptance tests. APR1400 Computerized Procedure System (CPS) has been applied to Shin-Kori Nuclear Power Plant (SKN) 3 and 4 units, Shin-Hanul Nuclear Power Plant (SHN) 1 and 2 units and Baraka Nuclear Power Plant (BNPP) 1, 2, 3 and 4 units. Since APR1400 CPS is a first-of-a-kind (FOAK) human machine interface (HMI) for executing a computerized procedure in the nuclear power plant's main control room in South Korea, it has been continuously improved through a) the human factor engineering (HFE) verification and validation (V and V), b) the internal design review and c) prototype tests. Human engineering discrepancies (HEDs) can be identified by the HFE V and V activity. Some HEDs of APR1400 CPS for SKN 3 and 4 and SHN 1 and 2 have been adopted as a role of design improvement in the CPS system while others were regarded as an operator training requirement or part of task contents. Various requests for improving the CPS have been collected from those results. A HMI system should be improved continuously for removing potential defects. Some of introduced design features in this paper has been adopted for APR1400 nuclear power plants. Some of them are under the review in the CPS design team of KHNP

Investigation of the Performance of Multidimensional Equating Procedures for Common-Item Nonequivalent Groups Design

Directory of Open Access Journals (Sweden)

Burcu ATAR

2017-12-01

Full Text Available In this study, the performance of the multidimensional extentions of Stocking-Lord, mean/mean, and mean/sigma equating procedures under common-item nonequivalent groups design was investigated. The performance of those three equating procedures was examined under the combination of various conditions including sample size, ability distribution, correlation between two dimensions, and percentage of anchor items in the test. Item parameter recovery was evaluated calculating RMSE (root man squared error and BIAS values. It was found that Stocking-Lord procedure provided the smaller RMSE and BIAS values for both item discrimination and item difficulty parameter estimates across most conditions.

New design procedure development of future reactor critical power estimation. (1) Practical design-by-analysis method for BWR critical power design correlation

International Nuclear Information System (INIS)

Yamamoto, Yasushi; Mitsutake, Toru

2007-01-01

For present BWR fuels, the full mock-up thermal-hydraulic test, such as the critical power measurement test, pressure drop measurement test and so on, has been needed. However, the full mock-up test required the high costs and large-scale test facility. At present, there are only a few test facilities to perform the full mock-up thermal-hydraulic test in the world. Moreover, for future BWR, the bundle size tends to be larger, because of reducing the plant construction costs and minimizing the routine check period. For instance, AB1600, improved ABWR, was proposed from Toshiba, whose bundle size was 1.2 times larger than the conventional BWR fuel size. It is too expensive and far from realistic to perform the full mock-up thermal-hydraulic test for such a large size fuel bundle. The new design procedure is required to realize the large scale bundle design development, especially for the future reactor. Therefore, the new design procedure, Practical Design-by-Analysis (PDBA) method, has been developed. This new procedure consists of the partial mock-up test and numerical analysis. At present, the subchannel analysis method based on three-fluid two-phase flow model only is a realistic choice. Firstly, the partial mock-up test is performed, for instance, the 1/4 partial mock-up bundle. Then, the first-step critical power correlation coefficients are evaluated with the measured data. The input data, such as the spacer effect model coefficient, on the subchannel analysis are also estimated with the data. Next, the radial power effect on the critical power of the full-bundle size was estimated with the subchannel analysis. Finally, the critical power correlation is modified by the subchannel analysis results. In the present study, the critical power correlation of the conventional 8x8 BWR fuel was developed with the PDBA method by 4x4 partial mock-up tests and the subchannel analysis code. The accuracy of the estimated critical power was 3.8%. The several themes remain to

Experimental design technique applied to the validation of an instrumental Neutron Activation Analysis procedure

International Nuclear Information System (INIS)

Santos, Uanda Paula de M. dos; Moreira, Edson Gonçalves

2017-01-01

In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) method were carried out for the determination of the elements bromine, chlorine, magnesium, manganese, potassium, sodium and vanadium in biological matrix materials using short irradiations at a pneumatic system. 2 k experimental designs were applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. The chosen experimental designs were the 2 3 and the 2 4 , depending on the radionuclide half life. Different certified reference materials and multi-element comparators were analyzed considering the following variables: sample decay time, irradiation time, counting time and sample distance to detector. Comparator concentration, sample mass and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations, it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN /CNEN-SP). Optimized conditions were estimated based on the results of z-score tests, main effect, interaction effects and better irradiation conditions. (author)

Experimental design technique applied to the validation of an instrumental Neutron Activation Analysis procedure

Energy Technology Data Exchange (ETDEWEB)

Santos, Uanda Paula de M. dos; Moreira, Edson Gonçalves, E-mail: uandapaula@gmail.com, E-mail: emoreira@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

2017-07-01

In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) method were carried out for the determination of the elements bromine, chlorine, magnesium, manganese, potassium, sodium and vanadium in biological matrix materials using short irradiations at a pneumatic system. 2{sup k} experimental designs were applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. The chosen experimental designs were the 2{sup 3} and the 2{sup 4}, depending on the radionuclide half life. Different certified reference materials and multi-element comparators were analyzed considering the following variables: sample decay time, irradiation time, counting time and sample distance to detector. Comparator concentration, sample mass and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations, it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN /CNEN-SP). Optimized conditions were estimated based on the results of z-score tests, main effect, interaction effects and better irradiation conditions. (author)

13 CFR 113.135 - Designation of responsible employee and adoption of grievance procedures.

Science.gov (United States)

2010-01-01

... employee and adoption of grievance procedures. 113.135 Section 113.135 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NONDISCRIMINATION IN FINANCIAL ASSISTANCE PROGRAMS OF SBA-EFFECTUATION OF POLICIES... Programs or Activities Receiving Federal Financial Assistance Introduction § 113.135 Designation of...

An analytical inductor design procedure for three-phase PWM converters in power factor correction applications

DEFF Research Database (Denmark)

Kouchaki, Alireza; Niroumand, Farideh Javidi; Haase, Frerk

2015-01-01

This paper presents an analytical method for designing the inductor of three-phase power factor correction converters (PFCs). The complex behavior of the inductor current complicates the inductor design procedure as well as the core loss and copper loss calculations. Therefore, this paper analyze...... to calculate the core loss in the PFC application. To investigate the impact of the dc link voltage level, two inductors for different dc voltage levels are designed and the results are compared.......This paper presents an analytical method for designing the inductor of three-phase power factor correction converters (PFCs). The complex behavior of the inductor current complicates the inductor design procedure as well as the core loss and copper loss calculations. Therefore, this paper analyzes...... circuit is used to provide the inductor current harmonic spectrum. Therefore, using the harmonic spectrum, the low and high frequency copper losses are calculated. The high frequency minor B-H loops in one switching cycle are also analyzed. Then, the loss map provided by the measurement setup is used...

Design procedure of capsule with multistage heater control (named MUSTAC)

International Nuclear Information System (INIS)

Someya, Hiroyuki; Endoh, Yasuichi; Hoshiya, Taiji; Niimi, Motoji; Harayama, Yasuo

1990-11-01

A capsule with electric heaters at multistage (named MUSTAC) is a type of capsule used in JMTR. The heaters are assembled in the capsule. Supply electric current to the heaters can be independently adjusted with a control systems that keeps irradiation specimens to constant temperature. The capsule being used, the irradiation specimen are inserted into specimen holders. Gas-gap size, between outer surface of specimen holders and inner surface of capsule casing, is calculated and determined to be flatten temperature of loaded specimens over the region. The rise or drop of specimen temperature in accordance with reactor power fluctuations is corrected within the target temperature of specimen by using the heaters filled into groove at specimen holder surface. The present report attempts to propose a reasonable design procedure of the capsules by means of compiling experience for designs, works and irradiation data of the capsules and to prepare for useful informations against onward capsule design. The key point of the capsule lies on thermal design. Now design thermal calculations are complicated in case of specimen holder with multihole. Resolving these issues, it is considered from new on that an emphasis have to placed on settling a thermal calculation device, for an example, a computer program on calculation specimen temperature. (author)

The quality of procedures to assess and credit prior learning: Implications for design.

NARCIS (Netherlands)

Joosten-ten Brinke, Desirée; Sluijsmans, Dominique; Brand-Gruwel, Saskia; Jochems, Wim

2008-01-01

Joosten-ten Brinke, D., Sluijsmans, D. M. A., Brand-Gruwel, S., & Jochems, W. M. G. (2008). The quality of procedures to assess and credit prior learning: Implications for design. Educational Research Review, 3, 51-65. doi:10.1016/j.edurev.2007.08.001.

Procedure for the design of Information Management Systems in Production Cooperatives

Directory of Open Access Journals (Sweden)

Maidelyn Díaz Pérez

2018-02-01

Full Text Available The information management systems of the entrepreneurial organizations have been conceived that the fulfillment of the strategic objectives depend to a large extent on the good performance of several informative tasks such as obtaining information from the environment, identifying and representing the information flows of the processes , the structuring of operational and functional data, the internal management of knowledge, etc. But in turn, the achievement of these actions depends on there being a group of procedures that lead to the adequate standardization of the data. In spite of the fact that these procedures are essential for the proper functioning of any system, and that, for the most part, the quality, reliability and pertinence of the information that is managed depends on them, it is not usual for them to exist in cooperative organizations. even in most cases they are not written. The objective of this research is to establish a procedure to design an information management system for research in a production cooperative linked directly to research. The result obtained allows identifying, defining and structuring the data required by the system to operate efficiently, as well as articulate the different components that should integrate it in its systemic development. This procedure facilitates the efficient management of operative, functional and strategic information of the different processes of a cooperative in correspondence with its strategic objectives.

44 CFR 19.135 - Designation of responsible employee and adoption of grievance procedures.

Science.gov (United States)

2010-10-01

... BASIS OF SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Designation of responsible employee and adoption of grievance procedures. 19.135 Section 19.135 Emergency Management and Assistance...

Power analysis for multivariate and repeated measures designs: a flexible approach using the SPSS MANOVA procedure.

Science.gov (United States)

D'Amico, E J; Neilands, T B; Zambarano, R

2001-11-01

Although power analysis is an important component in the planning and implementation of research designs, it is often ignored. Computer programs for performing power analysis are available, but most have limitations, particularly for complex multivariate designs. An SPSS procedure is presented that can be used for calculating power for univariate, multivariate, and repeated measures models with and without time-varying and time-constant covariates. Three examples provide a framework for calculating power via this method: an ANCOVA, a MANOVA, and a repeated measures ANOVA with two or more groups. The benefits and limitations of this procedure are discussed.

Avoiding thermal striping damage: Experimentally-based design procedures for high-cycle thermal fatigue

International Nuclear Information System (INIS)

Betts, C.; Judd, A.M.; Lewis, M.W.J.

1994-01-01

In the coolant circuits of a liquid metal cooled reactor (LMR), where there is turbulent mixing of coolant streams at different temperatures, there are temperature fluctuations in the fluid. If an item of the reactor structure is immersed in this fluid it will, because of the good heat transfer from the flowing liquid metal, experience surface temperature fluctuations which will induce dynamic surface strains. It is necessary to design the reactor so that these temperature fluctuations do not, over the life of the plant, cause damage. The purpose of this paper is to describe design procedures to prevent damage of this type. Two such procedures are given, one to prevent the initiation of defects in a nominally defect-free structure or to allow initiation only at the end of the component life, and the other to prevent significant growth of undetectable pre-existing defects of the order of 0.2 to 0.4 mm in depth. Experimental validation of these procedures is described, and the way they can be applied in practice is indicated. To set the scene the paper starts with a brief summary of cases in which damage of this type, or the need to avoid such damage, have had important effects on reactor operation. Structural damage caused by high-cycle thermal fatigue has had a significant adverse influence on the operation of LMRs on several occasions. It is necessary to eliminate the risk of such damage at the design stage. In the absence of detailed knowledge of the temperature history to which it will be subject, an LMR structure can be designed so that, if it is initially free of defects more than 0.1 mm deep, no such defects will be initiated by high-cycle fatigue. This can be done by ensuring that the maximum source temperature difference in the liquid metal is less than a limiting value, which depends on temperature. The limit is very low, however, and likely to be restrictive. This method, by virtue of its safety margin, takes into account pre-existing surface crack

State-of-the-practice : evaluation of sediment basin design, construction, maintenance, and inspection procedures.

Science.gov (United States)

2012-08-01

The following document is the summary of results from a survey that was conducted to evaluate : the state-of-the-practice for sediment basin design, construction, maintenance, and inspection : procedures by State Highway Agencies (SHAs) across the na...

Biosafety Procedure for Safe Handling of Genetically Modified Plant Materials in Bio Design Facility

International Nuclear Information System (INIS)

Zaiton Ahmad; Shuhaimi Shamsudin; Mohamed Najli Mohamed Yasin; Affrida Abu Hassan; Mohd Zaid Hassan; Rusli Ibrahim

2015-01-01

Bio Design Facility is the specifically designed glass house for propagation, screening and analysis of high quality plant varieties developed through biotechnology or a combination of nuclear technology and biotechnology. High quality plant varieties especially genetically modified plants (GMO) require a special glass house facility for propagation and screening to isolate them from cross-pollinating with wild type varieties in surrounding ecosystem, and for carrying out evaluation of possible risks of the plants to human, animal and environment before they are proven safe for field trials or commercial release. This facility which was developed under the Ninth Malaysia Plan is classified as the Plant Containment Level 2 and is compliance with the bio safety regulations and guidance for the safe release of GMO according to Malaysian Bio safety Act 2007. Bio Design Facility is fully operational since 2010 and in 2012, it has also been certified as the glass house for post-entry quarantine by The Department of Agriculture. This paper summarizes the bio safety procedure for a safe, controlled and contained growing and evaluation of GMO in Bio Design Facility. This procedure covers the physical (containment and equipment's) and operational (including responsibility, code of practice, growing, decontamination and disposal of plant materials, emergency and contingency plan) aspects of the facility. (author)

Generic procedure for designing and implementing plan management systems for space science missions operations

Science.gov (United States)

Chaizy, P. A.; Dimbylow, T. G.; Allan, P. M.; Hapgood, M. A.

2011-09-01

This paper is one of the components of a larger framework of activities whose purpose is to improve the performance and productivity of space mission systems, i.e. to increase both what can be achieved and the cost effectiveness of this achievement. Some of these activities introduced the concept of Functional Architecture Module (FAM); FAMs are basic blocks used to build the functional architecture of Plan Management Systems (PMS). They also highlighted the need to involve Science Operations Planning Expertise (SOPE) during the Mission Design Phase (MDP) in order to design and implement efficiently operation planning systems. We define SOPE as the expertise held by people who have both theoretical and practical experience in operations planning, in general, and in space science operations planning in particular. Using ESA's methodology for studying and selecting science missions we also define the MDP as the combination of the Mission Assessment and Mission Definition Phases. However, there is no generic procedure on how to use FAMs efficiently and systematically, for each new mission, in order to analyse the cost and feasibility of new missions as well as to optimise the functional design of new PMS; the purpose of such a procedure is to build more rapidly and cheaply such PMS as well as to make the latter more reliable and cheaper to run. This is why the purpose of this paper is to provide an embryo of such a generic procedure and to show that the latter needs to be applied by people with SOPE during the MDP. The procedure described here proposes some initial guidelines to identify both the various possible high level functional scenarii, for a given set of possible requirements, and the information that needs to be associated with each scenario. It also introduces the concept of catalogue of generic functional scenarii of PMS for space science missions. The information associated with each catalogued scenarii will have been identified by the above procedure and

Use of virtual steam generator cassette for tube spatial design and SGC assembling procedure

International Nuclear Information System (INIS)

Kim, Y. W.; Kim, J. I.; Ji, S. K.

2003-01-01

A method of determining spatial arrangement of tube connection and assembling procedure of once-through helical steam generator cassette utilizing three dimensional virtual steam generator cassette has been developed on the basis of recent 3-D modelling technology. One ends of the steam generator tubes are connected to the module feed water header and the other sides are connected to the module steam header. Due to the complex geometry of tube arrangement, it is very difficult to connect the tubes to the module headers without the help of a physical engineering mock up. A comparative study has been performed at each design step for the tube arrangement and heat transfer area. Heat transfer area computed from thermal sizing was 4% less than that of measured. Heat transfer area calculated from the virtual steam generator cassette mock up has only 0.2% difference with that of measured. Assembling procedure of the steam generator cassette also, can be developed in the design stage

An Application of Graphical Approach to Construct Multiple Testing Procedure in a Hypothetical Phase III Design

Directory of Open Access Journals (Sweden)

Naitee eTing

2014-01-01

Full Text Available Many multiple testing procedures (MTP have been developed in recent years. Among these new procedures, the graphical approach is flexible and easy to communicate with non-statisticians. A hypothetical Phase III clinical trial design is introduced in this manuscript to demonstrate how graphical approach can be applied in clinical product development. In this design, an active comparator is used. It is thought that this test drug under development could potentially be superior to this comparator. For comparison of efficacy, the primary endpoint is well established and widely accepted by regulatory agencies. However, an important secondary endpoint based on Phase II findings looks very promising. The target dose may have a good opportunity to deliver superiority to the comparator. Furthermore, a lower dose is included in case the target dose may demonstrate potential safety concerns. This Phase III study is designed as a non-inferiority trial with two doses, and two endpoints. This manuscript will illustrate how graphical approach is applied to this design in handling multiple testing issues.

Interdisciplinary Development of an Improved Emergency Department Procedural Work Surface Through Iterative Design and Use Testing in Simulated and Clinical Environments.

Science.gov (United States)

Zhang, Xiao C; Bermudez, Ana M; Reddy, Pranav M; Sarpatwari, Ravi R; Chheng, Darin B; Mezoian, Taylor J; Schwartz, Victoria R; Simmons, Quinneil J; Jay, Gregory D; Kobayashi, Leo

2017-03-01

A stable and readily accessible work surface for bedside medical procedures represents a valuable tool for acute care providers. In emergency department (ED) settings, the design and implementation of traditional Mayo stands and related surface devices often limit their availability, portability, and usability, which can lead to suboptimal clinical practice conditions that may affect the safe and effective performance of medical procedures and delivery of patient care. We designed and built a novel, open-source, portable, bedside procedural surface through an iterative development process with use testing in simulated and live clinical environments. The procedural surface development project was conducted between October 2014 and June 2016 at an academic referral hospital and its affiliated simulation facility. An interdisciplinary team of emergency physicians, mechanical engineers, medical students, and design students sought to construct a prototype bedside procedural surface out of off-the-shelf hardware during a collaborative university course on health care design. After determination of end-user needs and core design requirements, multiple prototypes were fabricated and iteratively modified, with early variants featuring undermattress stabilizing supports or ratcheting clamp mechanisms. Versions 1 through 4 underwent 2 hands-on usability-testing simulation sessions; version 5 was presented at a design critique held jointly by a panel of clinical and industrial design faculty for expert feedback. Responding to select feedback elements over several surface versions, investigators arrived at a near-final prototype design for fabrication and use testing in a live clinical setting. This experimental procedural surface (version 8) was constructed and then deployed for controlled usability testing against the standard Mayo stands in use at the study site ED. Clinical providers working in the ED who opted to participate in the study were provided with the prototype

Procedure guide of design, construction of prototypes, calibration and sure operation of nucleonic control systems

International Nuclear Information System (INIS)

Banados Perez, H.; Griffith Martinez, J.; Desdin Garcia, L.F.; Rodriguez Cardona, R.L.; Molina, G.; Sebastian Calvo, C.

1999-01-01

This Guide was elaborated in the mark of the project RLA/8/024 ARCAL XLII 'Industrial Applications of the Tracer Technology and Nucleonic Control Systems'. Its objective is to establish the approaches for the design, the construction, the selection and the procedures for the sure operation of the Nucleonic Control Systems (NCS) in the industry. The NCS is used to control processes to high speeds, materials with extreme conditions or with noxious chemical properties, susceptible materials of being damaged by contact and packed products. In this document is defined the scope of the procedure. The SCN are classified according to: type of radiations, the mobility of the components, the degree of the beams collimation; and in function of the security. The design and construction criteria of the nuclear meters and of the systems of control nucleonic are exposed

New procedures of ergonomics design in a large oil company.

Science.gov (United States)

Alhadeff, Cynthia Mossé; Silva, Rosana Fernandes da; Reis, Márcia Sales dos

2012-01-01

This study presents the challenge involved in the negotiation and construction of a standard process in a major petroleum company that has the purpose of guiding the implementation of ergonomic studies in the development of projects, systemising the implementation of ergonomics design. The standard was created by a multi-disciplinary working group consisting of specialists in ergonomics, who work in a number of different areas of the company. The objective was to guide "how to" undertake ergonomics in all projects, taking into consideration the development of the ergonomic appraisals of work. It also established that all the process, in each project phase, should be accompanied by a specialist in ergonomics. This process as an innovation in the conception of projects in this company, signals a change of culture, and, for this reason requires broad dissemination throughout the several company leadership levels, and training of professionals in projects of ergonomics design. An implementation plan was also prepared and approved by the corporate governance, complementing the proposed challenge. In this way, this major oil company will implement new procedures of ergonomics design to promote health, safety, and wellbeing of the workforce, besides improving the performance and reliability of its systems and processes.

Tailoring groundwater quality monitoring to vulnerability: a GIS procedure for network design.

Science.gov (United States)

Preziosi, E; Petrangeli, A B; Giuliano, G

2013-05-01

Monitoring networks aiming to assess the state of groundwater quality and detect or predict changes could increase in efficiency when fitted to vulnerability and pollution risk assessment. The main purpose of this paper is to describe a methodology aiming at integrating aquifers vulnerability and actual levels of groundwater pollution in the monitoring network design. In this study carried out in a pilot area in central Italy, several factors such as hydrogeological setting, groundwater vulnerability, and natural and anthropogenic contamination levels were analyzed and used in designing a network tailored to the monitoring objectives, namely, surveying the evolution of groundwater quality relating to natural conditions as well as to polluting processes active in the area. Due to the absence of an aquifer vulnerability map for the whole area, a proxi evaluation of it was performed through a geographic information system (GIS) methodology, leading to the so called "susceptibility to groundwater quality degradation". The latter was used as a basis for the network density assessment, while water points were ranked by several factors including discharge, actual contamination levels, maintenance conditions, and accessibility for periodical sampling in order to select the most appropriate to the network. Two different GIS procedures were implemented which combine vulnerability conditions and water points suitability, producing two slightly different networks of 50 monitoring points selected out of the 121 candidate wells and springs. The results are compared with a "manual" selection of the points. The applied GIS procedures resulted capable to select the requested number of water points from the initial set, evaluating the most confident ones and an appropriate density. Moreover, it is worth underlining that the second procedure (point distance analysis [PDA]) is technically faster and simpler to be performed than the first one (GRID + PDA).

Tools and procedures for a “maintenance oriented” design for buildings of worship

Directory of Open Access Journals (Sweden)

Cinzia Talamo

2013-10-01

Full Text Available The paper describes the results, achieved in the first year, of a three years research dealing with the themes connected with the methods and the tools for planned maintenance and concerning the proposal of a system of supports for a design “maintenance oriented”. The starting hypothesis is that most of maintenance problems emerging during the life time of a building are due to a lack of attention towards the use phase that both clients and designers demonstrate. Starting from this point of view the aim of the research was to develop and to check a system of supports, useful both for clients and for designs of buildings of worship, consisting in guide lines, procedures and evaluation tools, graduate according to the different steps of design process and carried out in order to assume and to verify the requirement of maintainability.

Robust parameter design for integrated circuit fabrication procedure with respect to categorical characteristic

International Nuclear Information System (INIS)

Sohn, S.Y.

1999-01-01

We consider a robust parameter design of the process for forming contact windows in complementary metal-oxide semiconductor circuits. Robust design is often used to find the optimal levels of process conditions which would provide the output of consistent quality as close to a target value. In this paper, we analyze the results of the fractional factorial design of nine factors: mask dimension, viscosity, bake temperature, spin speed, bake time, aperture, exposure time, developing time, etch time, where the outcome of the experiment is measured in terms of a categorized window size with five categories. Random effect analysis is employed to model both the mean and variance of categorized window size as functions of some controllable factors as well as random errors. Empirical Bayes' procedures are then utilized to fit both the models, and to eventually find the robust design of CMOS circuit process by means of a Bootstrap resampling approach

Procedure for developing biological input for the design, location, or modification of water-intake structures

Energy Technology Data Exchange (ETDEWEB)

Neitzel, D.A.; McKenzie, D.H.

1981-12-01

To minimize adverse impact on aquatic ecosystems resulting from the operation of water intake structures, design engineers must have relevant information on the behavior, physiology and ecology of local fish and shellfish. Identification of stimulus/response relationships and the environmental factors that influence them is the first step in incorporating biological information in the design, location or modification of water intake structures. A procedure is presented in this document for providing biological input to engineers who are designing, locating or modifying a water intake structure. The authors discuss sources of stimuli at water intakes, historical approaches in assessing potential/actual impact and review biological information needed for intake design.

A practical optimization procedure for radial BWR fuel lattice design using tabu search with a multiobjective function

International Nuclear Information System (INIS)

Francois, J.L.; Martin-del-Campo, C.; Francois, R.; Morales, L.B.

2003-01-01

An optimization procedure based on the tabu search (TS) method was developed for the design of radial enrichment and gadolinia distributions for boiling water reactor (BWR) fuel lattices. The procedure was coded in a computing system in which the optimization code uses the tabu search method to select potential solutions and the HELIOS code to evaluate them. The goal of the procedure is to search for an optimal fuel utilization, looking for a lattice with minimum average enrichment, with minimum deviation of reactivity targets and with a local power peaking factor (PPF) lower than a limit value. Time-dependent-depletion (TDD) effects were considered in the optimization process. The additive utility function method was used to convert the multiobjective optimization problem into a single objective problem. A strategy to reduce the computing time employed by the optimization was developed and is explained in this paper. An example is presented for a 10x10 fuel lattice with 10 different fuel compositions. The main contribution of this study is the development of a practical TDD optimization procedure for BWR fuel lattice design, using TS with a multiobjective function, and a strategy to economize computing time

Core design optimization by integration of a fast 3-D nodal code in a heuristic search procedure

Energy Technology Data Exchange (ETDEWEB)

Geemert, R. van; Leege, P.F.A. de; Hoogenboom, J.E.; Quist, A.J. [Delft University of Technology, NL-2629 JB Delft (Netherlands)

1998-07-01

An automated design tool is being developed for the Hoger Onderwijs Reactor (HOR) in Delft, the Netherlands, which is a 2 MWth swimming-pool type research reactor. As a black box evaluator, the 3-D nodal code SILWER, which up to now has been used only for evaluation of predetermined core designs, is integrated in the core optimization procedure. SILWER is a part of PSl's ELCOS package and features optional additional thermal-hydraulic, control rods and xenon poisoning calculations. This allows for fast and accurate evaluation of different core designs during the optimization search. Special attention is paid to handling the in- and output files for SILWER such that no adjustment of the code itself is required for its integration in the optimization programme. The optimization objective, the safety and operation constraints, as well as the optimization procedure, are discussed. (author)

Core design optimization by integration of a fast 3-D nodal code in a heuristic search procedure

International Nuclear Information System (INIS)

Geemert, R. van; Leege, P.F.A. de; Hoogenboom, J.E.; Quist, A.J.

1998-01-01

An automated design tool is being developed for the Hoger Onderwijs Reactor (HOR) in Delft, the Netherlands, which is a 2 MWth swimming-pool type research reactor. As a black box evaluator, the 3-D nodal code SILWER, which up to now has been used only for evaluation of predetermined core designs, is integrated in the core optimization procedure. SILWER is a part of PSl's ELCOS package and features optional additional thermal-hydraulic, control rods and xenon poisoning calculations. This allows for fast and accurate evaluation of different core designs during the optimization search. Special attention is paid to handling the in- and output files for SILWER such that no adjustment of the code itself is required for its integration in the optimization programme. The optimization objective, the safety and operation constraints, as well as the optimization procedure, are discussed. (author)

The guideline and practical procedures for earthquake-resistant design of nuclear power plants in Japan

International Nuclear Information System (INIS)

Watabe, M.

1985-01-01

The Guideline for the aseismic design of nuclear reactor facilities, revised in 1981, is introduced. The basic philosophy entails structural integrity against a major earthquake, rigid structure for less deformation and foundation on rock. The classification of facilities is then explained. Some practical examples are tabulated. In the light of the above classifications, evaluation procedures for aseismic design are defined. Design basis earthquake ground motions, S1 and S2, are defined. S1 is the maximum possible earthquake ground motion, while S2 is the maximum credible one. The relation between active faults and S1, S2 motions is explained, seismic forces induced by S1 and S2 are expressed in terms of response spectra. Static seismic coefficient procedures are also applied to evaluate seismic forces, as a minimum guide-line based on dynamic analysis. Combinations of seismic forces and allowable limits are then explained. In the second part of the paper, seismic analysis for reactor buildings as a part of design practice is outlined. There are three major key points in practical aseismic design. The first one is input design earthquake motions, in which soil/foundation interaction problems are also included. In practice, ground motions at the free field rock surface have to be convoluted or deconvoluted to obtain base rock motions, which are applied to estimate input design earthquake motions by way of finite element analysis or a lumped mass lattice model. Also introduced is dynamic modelling of the reactor building with its non-linear behaviour represented by plastic deformation of reinforced concrete members as well as by uplift characteristics of foundations. Then an evaluation of aseismic safety is introduced. (author)

Revisiting the Concepts "Approach", "Design" and "Procedure" According to the Richards and Rodgers (2011) Framework

Science.gov (United States)

Cumming, Brett

2012-01-01

The three concepts Approach, Design and Procedure as proposed in Rodgers' Framework are considered particularly effective as a framework in second language teaching with the specific aim of developing communication as well as for better understanding methodology in the use of communicative language use.

Evaluating procedural modelling for 3D models of informal settlements in urban design activities

Directory of Open Access Journals (Sweden)

Victoria Rautenbach

2015-11-01

Full Text Available Three-dimensional (3D modelling and visualisation is one of the fastest growing application fields in geographic information science. 3D city models are being researched extensively for a variety of purposes and in various domains, including urban design, disaster management, education and computer gaming. These models typically depict urban business districts (downtown or suburban residential areas. Despite informal settlements being a prevailing feature of many cities in developing countries, 3D models of informal settlements are virtually non-existent. 3D models of informal settlements could be useful in various ways, e.g. to gather information about the current environment in the informal settlements, to design upgrades, to communicate these and to educate inhabitants about environmental challenges. In this article, we described the development of a 3D model of the Slovo Park informal settlement in the City of Johannesburg Metropolitan Municipality, South Africa. Instead of using time-consuming traditional manual methods, we followed the procedural modelling technique. Visualisation characteristics of 3D models of informal settlements were described and the importance of each characteristic in urban design activities for informal settlement upgrades was assessed. Next, the visualisation characteristics of the Slovo Park model were evaluated. The results of the evaluation showed that the 3D model produced by the procedural modelling technique is suitable for urban design activities in informal settlements. The visualisation characteristics and their assessment are also useful as guidelines for developing 3D models of informal settlements. In future, we plan to empirically test the use of such 3D models in urban design projects in informal settlements.

Robust parameter design for integrated circuit fabrication procedure with respect to categorical characteristic

Energy Technology Data Exchange (ETDEWEB)

Sohn, S.Y

1999-12-01

We consider a robust parameter design of the process for forming contact windows in complementary metal-oxide semiconductor circuits. Robust design is often used to find the optimal levels of process conditions which would provide the output of consistent quality as close to a target value. In this paper, we analyze the results of the fractional factorial design of nine factors: mask dimension, viscosity, bake temperature, spin speed, bake time, aperture, exposure time, developing time, etch time, where the outcome of the experiment is measured in terms of a categorized window size with five categories. Random effect analysis is employed to model both the mean and variance of categorized window size as functions of some controllable factors as well as random errors. Empirical Bayes' procedures are then utilized to fit both the models, and to eventually find the robust design of CMOS circuit process by means of a Bootstrap resampling approach.

Ultra High-Performance Fiber-Reinforced Concrete (UHPFRC: a review of material properties and design procedures

Directory of Open Access Journals (Sweden)

T. E. T. Buttignol

Full Text Available ABSTRACT This paper does a review of the recent achievements on the knowledge of UHPFRC properties and in the development of design procedures. UHPFRC is defined as a new material, with unique properties (high ductility, low permeability, very high strength capacity in compression, higher toughness in comparison to conventional concrete. It is important to know both material and mechanical properties to fully take advantage of its outstanding properties for structural applications. However, since this is a new material, the current design codes are not well suited and should be reviewed before being applied to UHPFRC. In the first part, the following material properties are addressed: hydration process; permeability; fibers role; mix design; fiber-matrix bond properties workability; mixing procedure; and curing. In the second part, the mechanical properties of the material are discussed, together with some design recommendations. The aspects herein examined are: size effect; compressive and flexural strength; tensile stress-strain relation; shear and punching shear capacity; creep and shrinkage; fracture energy; steel bars anchorage and adherence. Besides, the tensile mechanical characterization is described using inverse analysis based on bending tests data. In the last part, material behavior at high temperature is discussed, including physical-chemical transformations of the concrete, spalling effect, and transient creep. In the latter case, a new Load Induced Thermal Strain (LITS semi-empirical model is described and compared with UHPC experimental results.

Implementation procedures for design certification

International Nuclear Information System (INIS)

Ritterbusch, S. E.; Brinkman, C. B.; Crump, M. W.

1995-01-01

The desire for safer plants arose primarily as the result of the Three Mile Island accident and the realization that plant safety could be impacted by complex plant systems interactions that are not easily identified through the traditional 'system-by-system' design process. Hence, it became apparent that the ALWR designs would have to be addressed through plant-wide Probabilistic Safety Assessments (PSAs) that addressed both accident-prevention and accident-mitigation design features. Prior to Design Certification the 'two-step' licensing process in the United States was not efficient. Utilities had to commit large amounts of capital to plant construction without confidence that an operating license would be issued when construction permit was issued often required design changes that resulted in significant construction delays. The 55 utilities operating nuclear plants in the U. S. each had their own design and operating preferences, resulting in many customized plants with a minimum of economic benefit from standardization. This was addressed by the U. S. Nuclear Regulatory Commission (NRC) in a new regulation (Title 10 of the Code of Federal Regulations, Part 52 or '10 CFR 52') which provides certification of a design that can later be referenced by an applicant for a Combined Operating License (COL). Identifying an ALWR solution for previously unanalyzed severe accident scenarios appeared difficult, at best, since severe accident research had to be performed and since there was no regulatory precedent. This meant that complex technical issues and licensing review policies had to be developed without the benefit of licensing standards or experience. As a result, a system of iterative interactions between the regulator and the industry was established, wherein a design or safety requirement would be proposed, then discussed along with development of the corresponding design feature, and finally revised and documented via NRC 'guidance'

Assisted design, implementation, and modification of procedure tracking and advisory systems

International Nuclear Information System (INIS)

Patterson-Hine, F.A.; Boy, G.A.; Conley, J.L.; Iverson, D.L.

1991-01-01

Automated procedure tracking systems have been of interest in the nuclear power industry due to the huge numbers of documented procedures required for the operation and maintenance of commercial power reactors. Tools are under development at Ames Research center that form the basis of an intelligent advisory system for process control applications. Two tools, one for documentation maintenance and management and the other for automated fault diagnosis, are being integrated to build an advisory system appropriate for use in facilities that require emergency readiness and safety-critical operations. The problem of automation of documents management and maintenance has been analyzed from artificial intelligence and from human factors viewpoints. A software tool, called computer-integrated documentation (CID), has been designed and is under further development to address these issues. A fault diagnosis algorithm has been developed and implemented in a software tool called the fault-tree diagnosis system (FTDS). The algorithm uses a knowledge base that is easily changed and updated to reflect current system status. An integrated tool set consisting of CID and FTDS is being used to develop and demonstrate an intelligent advisory system for use in a flight test environment for advanced aircraft

Design of an X-band accelerating structure using a newly developed structural optimization procedure

Energy Technology Data Exchange (ETDEWEB)

Huang, Xiaoxia [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Fang, Wencheng; Gu, Qiang [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Zhao, Zhentang, E-mail: zhaozhentang@sinap.ac.cn [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); University of Chinese Academy of Sciences, Beijing 100049 (China)

2017-05-11

An X-band high gradient accelerating structure is a challenging technology for implementation in advanced electron linear accelerator facilities. The present work discusses the design of an X-band accelerating structure for dedicated application to a compact hard X-ray free electron laser facility at the Shanghai Institute of Applied Physics, and numerous design optimizations are conducted with consideration for radio frequency (RF) breakdown, RF efficiency, short-range wakefields, and dipole/quadrupole field modes, to ensure good beam quality and a high accelerating gradient. The designed X-band accelerating structure is a constant gradient structure with a 4π/5 operating mode and input and output dual-feed couplers in a racetrack shape. The design process employs a newly developed effective optimization procedure for optimization of the X-band accelerating structure. In addition, the specific design of couplers providing high beam quality by eliminating dipole field components and reducing quadrupole field components is discussed in detail.

Using a standards committee to design practical procedure system improvements

International Nuclear Information System (INIS)

Grider, D.A.; Plung, D.

1993-01-01

In the post-Three Mile Island (TMI) environment, numerous reports have been issued on how to improve the quality of procedures used at government and commercial nuclear facilities. The studies tend to be long on what is wrong with existing procedures and short on practical directions on how to fix those faults. Few of these studies have been conducted by practitioners with full-time procedure-managing or procedure writing experience. None of these studies go into detail on how to improve the procedure system itself. Over the last 10 yr, various nuclear facilities within the US Department of Energy (DOE) have carried out individual programs to develop procedures that meet post-TMI standards. However, ∼2 yr ago, DOE formed a Procedures Standards Committee to advise DOE in developing a set of post-TMI guidelines that could be consistently applied throughout all DOE nuclear facilities. The committee has achieved not only its original mission by producing a series of integrated guidance documents but has also evolved a systems approach to procedures management that sets new standards for procedure quality and efficiency. As members of this committee, the authors want to describe what has made the group's approach so successful. The lessons learned may be translatable to a wide range of government and commercial industry procedure programs

Sampling design and procedures for fixed surface-water sites in the Georgia-Florida coastal plain study unit, 1993

Science.gov (United States)

Hatzell, H.H.; Oaksford, E.T.; Asbury, C.E.

1995-01-01

The implementation of design guidelines for the National Water-Quality Assessment (NAWQA) Program has resulted in the development of new sampling procedures and the modification of existing procedures commonly used in the Water Resources Division of the U.S. Geological Survey. The Georgia-Florida Coastal Plain (GAFL) study unit began the intensive data collection phase of the program in October 1992. This report documents the implementation of the NAWQA guidelines by describing the sampling design and procedures for collecting surface-water samples in the GAFL study unit in 1993. This documentation is provided for agencies that use water-quality data and for future study units that will be entering the intensive phase of data collection. The sampling design is intended to account for large- and small-scale spatial variations, and temporal variations in water quality for the study area. Nine fixed sites were selected in drainage basins of different sizes and different land-use characteristics located in different land-resource provinces. Each of the nine fixed sites was sampled regularly for a combination of six constituent groups composed of physical and chemical constituents: field measurements, major ions and metals, nutrients, organic carbon, pesticides, and suspended sediments. Some sites were also sampled during high-flow conditions and storm events. Discussion of the sampling procedure is divided into three phases: sample collection, sample splitting, and sample processing. A cone splitter was used to split water samples for the analysis of the sampling constituent groups except organic carbon from approximately nine liters of stream water collected at four fixed sites that were sampled intensively. An example of the sample splitting schemes designed to provide the sample volumes required for each sample constituent group is described in detail. Information about onsite sample processing has been organized into a flowchart that describes a pathway for each of

Analysis and application of ratcheting evaluation procedure of Japanese high temperature design code DDS

International Nuclear Information System (INIS)

Lee, H. Y.; Kim, J. B.; Lee, J. H.

2002-01-01

In this study, the evaluation procedure of Japanese DDS code which was recently developed to assess the progressive inelastic deformation occurring under repetition of secondary stresses was analyzed and the evaluation results according to DDS was compared those of the thermal ratchet structural test carried out by KAERI to analyze the conservativeness of the code. The existing high temperature codes of US ASME-NH and French RCC-MR suggest the limited ratcheting procedures for only the load cases of cyclic secondary stresses under primary stresses. So they are improper to apply to the actual ratcheting problem which can occur under cyclic secondary membrane stresses due to the movement of hot free surface for the pool type LMR. DDS provides explicitly an analysis procedure of ratcheting due to moving thermal gradients near hot free surface. A comparison study was carried out between the results by the design code of DDS and by the structural test to investigate the conservativeness of DDS code, which showed that the evaluation results by DDS were in good agreement with those of the structural test

Hardware design and implementation of a wavelet de-noising procedure for medical signal preprocessing.

Science.gov (United States)

Chen, Szi-Wen; Chen, Yuan-Ho

2015-10-16

In this paper, a discrete wavelet transform (DWT) based de-noising with its applications into the noise reduction for medical signal preprocessing is introduced. This work focuses on the hardware realization of a real-time wavelet de-noising procedure. The proposed de-noising circuit mainly consists of three modules: a DWT, a thresholding, and an inverse DWT (IDWT) modular circuits. We also proposed a novel adaptive thresholding scheme and incorporated it into our wavelet de-noising procedure. Performance was then evaluated on both the architectural designs of the software and. In addition, the de-noising circuit was also implemented by downloading the Verilog codes to a field programmable gate array (FPGA) based platform so that its ability in noise reduction may be further validated in actual practice. Simulation experiment results produced by applying a set of simulated noise-contaminated electrocardiogram (ECG) signals into the de-noising circuit showed that the circuit could not only desirably meet the requirement of real-time processing, but also achieve satisfactory performance for noise reduction, while the sharp features of the ECG signals can be well preserved. The proposed de-noising circuit was further synthesized using the Synopsys Design Compiler with an Artisan Taiwan Semiconductor Manufacturing Company (TSMC, Hsinchu, Taiwan) 40 nm standard cell library. The integrated circuit (IC) synthesis simulation results showed that the proposed design can achieve a clock frequency of 200 MHz and the power consumption was only 17.4 mW, when operated at 200 MHz.

Application of a Monte Carlo procedure for probabilistic fatigue design of floating offshore wind turbines

Directory of Open Access Journals (Sweden)

K. Müller

2018-03-01

Full Text Available Fatigue load assessment of floating offshore wind turbines poses new challenges on the feasibility of numerical procedures. Due to the increased sensitivity of the considered system with respect to the environmental conditions from wind and ocean, the application of common procedures used for fixed-bottom structures results in either inaccurate simulation results or hard-to-quantify conservatism in the system design. Monte Carlo-based sampling procedures provide a more realistic approach to deal with the large variation in the environmental conditions, although basic randomization has shown slow convergence. Specialized sampling methods allow efficient coverage of the complete design space, resulting in faster convergence and hence a reduced number of required simulations. In this study, a quasi-random sampling approach based on Sobol sequences is applied to select representative events for the determination of the lifetime damage. This is calculated applying Monte Carlo integration, using subsets of a resulting total of 16 200 coupled time–domain simulations performed with the simulation code FAST. The considered system is the Danmarks Tekniske Universitet (DTU 10 MW reference turbine installed on the LIFES50+ OO-Star Wind Floater Semi 10 MW floating platform. Statistical properties of the considered environmental parameters (i.e., wind speed, wave height and wave period are determined based on the measurement data from the Gulf of Maine, USA. Convergence analyses show that it is sufficient to perform around 200 simulations in order to reach less than 10 % uncertainty of lifetime fatigue damage-equivalent loading. Complementary in-depth investigation is performed, focusing on the load sensitivity and the impact of outliers (i.e., values far away from the mean. Recommendations for the implementation of the proposed methodology in the design process are also provided.

Design of the exhale airway stents for emphysema (EASE) trial : an endoscopic procedure for reducing hyperinflation

NARCIS (Netherlands)

Shah, Pallav L.; Slebos, Dirk-Jan; Cardoso, Paulo F. G.; Cetti, Edward J.; Sybrecht, Gerhard W.; Cooper, Joel D.

2011-01-01

Background: Airway Bypass is a catheter-based, bronchoscopic procedure in which new passageways are created that bypass the collapsed airways, enabling trapped air to exit the lungs. The Exhale Airway Stents for Emphysema (EASE) Trial was designed to investigate whether Exhale (R) Drug-Eluting

Effective Work Procedure design Using Discomfort and Effort Factor in Brick stacking operation-A case study

Science.gov (United States)

Rout, Biswaranjan; Dash, R. R.; Dhupal, D.

2018-02-01

In this work a typical planning of movement of limbs and torso of the worker to be well design to reduce fatigue and energy of the worker. A simulation model is generated to suit the procedure and comply with the constraints in the workspace. It requires verifying the capability of human postures and movements in different working conditions for the evaluation of effectiveness of the new design. In this article a simple human performance measure is introduce that enable the mathematical model for evaluation of a cost function. The basic scheme is to evaluate the performance in the form of several cost factors using AI techniques. Here two main cost factors taken in to consideration are discomfort factor and effort factor in limb movements. Discomfort factor measures the level of discomfort from the most neutral position of a given limb to the position of the corresponding limb after movement and effort factor is a measure of the displacement of the corresponding limbs from the original position. The basic aim is to optimize the movement of the limbs with the above mentioned cost functions. The effectiveness of the procedure is tested with an example of working procedure of workers used for stacking of fly ash bricks in a local fly ash bricks manufacturing unit. The objective is to find out the optimised movement of the limbs to reduce discomfort level and effort required of workers. The effectiveness of the procedure in this case study illustrated with the obtained results.

Execution techniques for high level radioactive waste disposal. 4. Design and manufacturing procedure of engineered barriers

International Nuclear Information System (INIS)

Ogata, Nobuhide; Kosaki, Akio; Ueda, Hiroyoshi; Asano, Hidekazu; Takao, Hajime

1999-01-01

Ensuring the physical integrity of engineered barriers for an extremely long time period is necessary for geological disposal of high-level radioactive wastes. This report describes the design process and the designed configurations of both overpack and buffer as engineered barriers. Manufacturing procedure, quality control and inspection methods are also summarized. Carbon steel was selected as a structural material of the overpack and the specification of the overpack was determined assuming disposal in the depths of 1000 m below surface of crystalline rock site. The mixture of bentonite and sand (80% sodium bentonite and 20% silica sand by mass) was selected as material for a buffer from mainly its permeability and characteristics of self-sealing of a gap occurred in construction work. Welding method of a lid onto the main body of the overpack, uniting method of a corrosion-resistance layer and the structural component in the case of a composite overpack and manufacturing procedures of both blocks-type and monolithic-type buffers are also investigated. (author)

Statistical design of mass spectrometry calibration procedures

International Nuclear Information System (INIS)

Bayne, C.K.

1996-11-01

The main objective of this task was to agree on calibration procedures to estimate the system parameters (i.e., dead-time correction, ion-counting conversion efficiency, and detector efficiency factors) for SAL's new Finnigan MAT-262 mass spectrometer. SAL will use this mass spectrometer in a clean-laboratory which was opened in December 1995 to measure uranium and plutonium isotopes on environmental samples. The Finnigan MAT-262 mass spectrometer has a multi-detector system with seven Faraday cup detectors and one ion- counter for the measurement of very small signals (e.g. 10 -17 Ampere range). ORNL has made preliminary estimates of the system parameters based on SAL's experimental data measured in late 1994 when the Finnigan instrument was relatively new. SAL generated additional data in 1995 to verify the calibration procedures for estimating the dead-time correction factor, the ion-counting conversion factor and the Faraday cup detector efficiency factors. The system parameters estimated on the present data will have to be reestablished when the Finnigan MAT-262 is moved-to the new clean- laboratory. Different methods will be used to analyzed environmental samples than the current measurement methods being used. For example, the environmental samples will be electroplated on a single filament rather than using the current two filament system. An outline of the calibration standard operating procedure (SOP) is included

In-Trail Procedure Air Traffic Control Procedures Validation Simulation Study

Science.gov (United States)

Chartrand, Ryan C.; Hewitt, Katrin P.; Sweeney, Peter B.; Graff, Thomas J.; Jones, Kenneth M.

2012-01-01

In August 2007, Airservices Australia (Airservices) and the United States National Aeronautics and Space Administration (NASA) conducted a validation experiment of the air traffic control (ATC) procedures associated with the Automatic Dependant Surveillance-Broadcast (ADS-B) In-Trail Procedure (ITP). ITP is an Airborne Traffic Situation Awareness (ATSA) application designed for near-term use in procedural airspace in which ADS-B data are used to facilitate climb and descent maneuvers. NASA and Airservices conducted the experiment in Airservices simulator in Melbourne, Australia. Twelve current operational air traffic controllers participated in the experiment, which identified aspects of the ITP that could be improved (mainly in the communication and controller approval process). Results showed that controllers viewed the ITP as valid and acceptable. This paper describes the experiment design and results.

A design procedure for a slotted waveguide with probe-fed slots radiating into plasma

International Nuclear Information System (INIS)

Colborn, J.A.

1989-11-01

A design procedure is developed for slotted-waveguide antennas with probe-fed slots. Radiation into a gyrotropic, plane-stratified medium is considered, nonzero waveguide wall thickness is assumed, and noncosinusoidal slot fields and arbitrary slot length up to about one free-space wavelength are allowed. External mutual coupling is taken into account by matching the tangential fields at the antenna surface. The particular case of longitudinal slots in the broad face of rectangular guide is analyzed. The motivation for this work is the design of such radiators for plasma heating and current-drive on thermonuclear fusion experiments, but some of the analysis is applicable to the probeless slotted waveguide used for avionics and communications. 20 refs., 5 figs

Hardware Design and Implementation of a Wavelet De-Noising Procedure for Medical Signal Preprocessing

Directory of Open Access Journals (Sweden)

Szi-Wen Chen

2015-10-01

Full Text Available In this paper, a discrete wavelet transform (DWT based de-noising with its applications into the noise reduction for medical signal preprocessing is introduced. This work focuses on the hardware realization of a real-time wavelet de-noising procedure. The proposed de-noising circuit mainly consists of three modules: a DWT, a thresholding, and an inverse DWT (IDWT modular circuits. We also proposed a novel adaptive thresholding scheme and incorporated it into our wavelet de-noising procedure. Performance was then evaluated on both the architectural designs of the software and. In addition, the de-noising circuit was also implemented by downloading the Verilog codes to a field programmable gate array (FPGA based platform so that its ability in noise reduction may be further validated in actual practice. Simulation experiment results produced by applying a set of simulated noise-contaminated electrocardiogram (ECG signals into the de-noising circuit showed that the circuit could not only desirably meet the requirement of real-time processing, but also achieve satisfactory performance for noise reduction, while the sharp features of the ECG signals can be well preserved. The proposed de-noising circuit was further synthesized using the Synopsys Design Compiler with an Artisan Taiwan Semiconductor Manufacturing Company (TSMC, Hsinchu, Taiwan 40 nm standard cell library. The integrated circuit (IC synthesis simulation results showed that the proposed design can achieve a clock frequency of 200 MHz and the power consumption was only 17.4 mW, when operated at 200 MHz.

Crush performance of redwood for developing design procedures for impact limiters

International Nuclear Information System (INIS)

Cramer, S.M.; Hermanson, J.C.; McMurtry, W.M.

1995-01-01

Containers for the transportation of hazardous and radioactive materials incorporate redwood in impact limiters. Redwood is an excellent energy absorber, but only the most simplistic information exists on its crush properties. Tbe stress-strain interrelationship for any wood species subject to three-dimensional stresses is largely unknown for any all stress condition and wood behavior at both high strains and high strain-rates is known only in general terms. Both stress-strain and crush failure theories have been developed based only on uniaxial load tests. The anisotropy of wood adds an additional complexity to measuring wood response and developing suitable theories to describe it. A long history of wood utilization in the building industry has led to design procedures and property information related to simple uniaxial loadings that do not inflict damage to the wood. This lack of knowledge may be surprising for a material that has a long history of engineered use, but the result is difficulty in utilizing wood in more sophisticated designs such as impact limiters. This study provides a step toward filling the information gap on wood material response for high performance applications such as impact limiters

Protection of citizens' rights by appropriate design of legal procedures

International Nuclear Information System (INIS)

Bluemel, W.

1982-01-01

The author regards the Muehlheim-Kaerlich ruling by the Federal Constitutional Court of December 12, 1979 as a ruling which stipulates the protection of basic rights as a main function of the citizen participation. The essential importance of this ruling is specified by the statement that the shaping of procedures - of courts and authorities - has a constitutional importance, that the shaping of procedures is an essential element of an effective guarantee of basic rights. He expressly extends the above mentioned jurisdiction of the Federal Constitutional Court beyond the influence of the substantive basic rights on the procedural law to the administrative procedural law. The procedural basic right of article 19, section 4 of the constitution is supplemented by the claim for an effective legal protection which directly results from the substantive basic right of article 14, section 1, paragraph 1 of the constitution. (orig./HSCH) [de

A general U-block model-based design procedure for nonlinear polynomial control systems

Science.gov (United States)

Zhu, Q. M.; Zhao, D. Y.; Zhang, Jianhua

2016-10-01

The proposition of U-model concept (in terms of 'providing concise and applicable solutions for complex problems') and a corresponding basic U-control design algorithm was originated in the first author's PhD thesis. The term of U-model appeared (not rigorously defined) for the first time in the first author's other journal paper, which established a framework for using linear polynomial control system design approaches to design nonlinear polynomial control systems (in brief, linear polynomial approaches → nonlinear polynomial plants). This paper represents the next milestone work - using linear state-space approaches to design nonlinear polynomial control systems (in brief, linear state-space approaches → nonlinear polynomial plants). The overall aim of the study is to establish a framework, defined as the U-block model, which provides a generic prototype for using linear state-space-based approaches to design the control systems with smooth nonlinear plants/processes described by polynomial models. For analysing the feasibility and effectiveness, sliding mode control design approach is selected as an exemplary case study. Numerical simulation studies provide a user-friendly step-by-step procedure for the readers/users with interest in their ad hoc applications. In formality, this is the first paper to present the U-model-oriented control system design in a formal way and to study the associated properties and theorems. The previous publications, in the main, have been algorithm-based studies and simulation demonstrations. In some sense, this paper can be treated as a landmark for the U-model-based research from intuitive/heuristic stage to rigour/formal/comprehensive studies.

Design and optimisation of purification procedure for biodiesel washing

Directory of Open Access Journals (Sweden)

S.B. Glišić

2009-09-01

Full Text Available Almost complete methanolysis of triglycerides is usually not enough to fulfil the strict standards of biodiesel quality. A key step in this process is neutralization of alkali (catalyst followed by the washing procedure necessary for removing different impurities such as traces of catalyst and methanol and removal of soaps and glycerol from esters phase. The washing with hot water is still widely used in many industrial units for the biodiesel production. In this study, different procedures of biodiesel washing using hot water were investigated. The orto-phosphoric acid was suggested as the best compound for alkali catalyst (sodium hydroxide neutralization. The main goal of the performed analysis was to minimize the water usage in the washing-neutralization step during the biodiesel production. Such solution would make the process of biodiesel synthesis more economical taking into account the decrease of energy consumed for evaporation of water during the final product purification, as well as more acceptable procedure related to the impact on environment (minimal waste water release. Results of the performed simulation of the washing process supported by original experimental data suggested that neutralization after the optimized washing process of the methyl ester layer could be the best solution. The proposed washing procedure significantly decreases the amount of waste water giving at the same time the desired purity of final products (biodiesel and glycerol. The simulation of the process was performed using ASPEN plus software supported by ELCANTREL and UNIQUAC procedure of required properties calculation

Design procedure for pollutant loadings and impacts for highway stormwater runoff (Macintosh version) (for microcomputers). Software

International Nuclear Information System (INIS)

1990-01-01

The interactive computer program was developed to make a user friendly procedure for the personal computer for calculations and guidance to make estimations of pollutant loadings and impacts from highway stormwater runoff which are presented in the Publication FHWA-RD-88-006, Pollutant Loadings and Impacts from Highway Stormwater Runoff, Volume I: Design Procedure. The computer program is for the evaluation of the water quality impact from highway stormwater runoff to a lake or a stream from a specific highway site considering the necessary rainfall data and geographic site situation. The evaluation considers whether or not the resulting water quality conditions can cause a problem as indicated by the violations of water quality criteria or objectives

Design procedure for pollutant loadings and impacts for highway stormwater runoff (IBM version) (for microcomputers). Software

International Nuclear Information System (INIS)

1990-01-01

The interactive computer program was developed to make a user friendly procedure for the personal computer for calculations and guidance to make estimations of pollutant loadings and impacts from highway stormwater runoff which are presented in the Publication FHWA-RD-88-006, Pollutant Loadings and Impacts from Highway Stormwater Runoff, Volume I: Design Procedure. The computer program is for the evaluation of the water quality impact from highway stormwater runoff to a lake or a stream from a specific highway site considering the necessary rainfall data and geographic site situation. The evaluation considers whether or not the resulting water quality conditions can cause a problem as indicated by the violations of water quality criteria or objectives

Study on design procedure of three-dimensional building base isolation system using thick rubber bearing

International Nuclear Information System (INIS)

Yabana, Shuichi; Matsuda, Akihiro

2003-01-01

In this study, design procedure on three-dimensional base isolation system is developed. Base isolation system proposed by CRIEPI uses thick rubber bearing and damper as isolation device. As for thick rubber bearings, design formula for evaluating vertical stiffness is proposed, and design conditions regarding size and vertical pressure are investigated. Figure-U type lead damper is proposed as three-dimensional damper and by loading tests its mechanical characteristics is evaluated. The concept of multi-layered interconnected rubber bearing, which is advantageous over large scale bearing in manufacturability, is proposed and its good performance is confirmed by the loading test. Through the response analyses, it is shown the rocking response of the proposed three-dimensional base isolation system is very small and not influential to the system, and the reduction of the vertical response is attained using the proposed isolation device. (author)

26 CFR 1.852-9 - Special procedural requirements applicable to designation under section 852(b)(3)(D).

Science.gov (United States)

2010-04-01

... notice by the Internal Revenue Service that the regulated investment company has failed to comply with... 26 Internal Revenue 9 2010-04-01 2010-04-01 false Special procedural requirements applicable to designation under section 852(b)(3)(D). 1.852-9 Section 1.852-9 Internal Revenue INTERNAL REVENUE SERVICE...

Design of Training Systems, Phase II Report, Volume III; Model Program Descriptions and Operating Procedures. TAEG Report No. 12-2.

Science.gov (United States)

Naval Training Equipment Center, Orlando, FL. Training Analysis and Evaluation Group.

The Design of Training Systems (DOTS) project was initiated by the Department of Defense (DOD) to develop tools for the effective management of military training organizations. Volume 3 contains the model and data base program descriptions and operating procedures designed for phase 2 of the project. Flow charts and program listings for the…

Evaluation of vertical profiles to design continuous descent approach procedure

Science.gov (United States)

Pradeep, Priyank

The current research focuses on predictability, variability and operational feasibility aspect of Continuous Descent Approach (CDA), which is among the key concepts of the Next Generation Air Transportation System (NextGen). The idle-thrust CDA is a fuel economical, noise and emission abatement procedure, but requires increased separation to accommodate for variability and uncertainties in vertical and speed profiles of arriving aircraft. Although a considerable amount of researches have been devoted to the estimation of potential benefits of the CDA, only few have attempted to explain the predictability, variability and operational feasibility aspect of CDA. The analytical equations derived using flight dynamics and Base of Aircraft and Data (BADA) Total Energy Model (TEM) in this research gives insight into dependency of vertical profile of CDA on various factors like wind speed and gradient, weight, aircraft type and configuration, thrust settings, atmospheric factors (deviation from ISA (DISA), pressure and density of the air) and descent speed profile. Application of the derived equations to idle-thrust CDA gives an insight into sensitivity of its vertical profile to multiple factors. This suggests fixed geometric flight path angle (FPA) CDA has higher degree of predictability and lesser variability at the cost of non-idle and low thrust engine settings. However, with optimized design this impact can be overall minimized. The CDA simulations were performed using Future ATM Concept Evaluation Tool (FACET) based on radar-track and aircraft type data (BADA) of the real air-traffic to some of the busiest airports in the USA (ATL, SFO and New York Metroplex (JFK, EWR and LGA)). The statistical analysis of the vertical profiles of CDA shows 1) mean geometric FPAs derived from various simulated vertical profiles are consistently shallower than 3° glideslope angle and 2) high level of variability in vertical profiles of idle-thrust CDA even in absence of

DESIGN OF A COUNTABLE PROCEDURE FOR THE REGISTRATION OF ENVIRONMENTAL VARIABLES

Directory of Open Access Journals (Sweden)

Elier Eugenio Rabanal-Arencibia

2016-01-01

Full Text Available Many companies present in their memoirs matters of environmental character, but they are few those that are able to count the environmental facts that definitively influence in their financial states. One of the challenges of our managerial sector in Cuba is to integrate the topic of the environment to the process of taking decisions and to the business strategies. A countable system that contemplates the environmental concept in its classifier of bills, obviously will have available information for its costs and environmental revenues, what is indispensable in the long term company development, especially if it is about companies related with the exploitation of natural resources. The purpose is to carry out the Design of a Countable Procedure for the registration of environmental variables, as a support to the continuous improvement of the Environmental Accounting. 

Design-related influencing factors of the computerized procedure system for inclusion into human reliability analysis of the advanced control room

International Nuclear Information System (INIS)

Kim, Jaewhan; Lee, Seung Jun; Jang, Seung Cheol; Ahn, Kwang-Il; Shin, Yeong Cheol

2013-01-01

This paper presents major design factors of the computerized procedure system (CPS) by task characteristics/requirements, with individual relative weight evaluated by the analytic hierarchy process (AHP) technique, for inclusion into human reliability analysis (HRA) of the advanced control rooms. Task characteristics/requirements of an individual procedural step are classified into four categories according to the dynamic characteristics of an emergency situation: (1) a single-static step, (2) a single-dynamic and single-checking step, (3) a single-dynamic and continuous-monitoring step, and (4) a multiple-dynamic and continuous-monitoring step. According to the importance ranking evaluation by the AHP technique, ‘clearness of the instruction for taking action’, ‘clearness of the instruction and its structure for rule interpretation’, and ‘adequate provision of requisite information’ were rated as of being higher importance for all the task classifications. Importance of ‘adequacy of the monitoring function’ and ‘adequacy of representation of the dynamic link or relationship between procedural steps’ is dependent upon task characteristics. The result of the present study gives a valuable insight on which design factors of the CPS should be incorporated, with relative importance or weight between design factors, into HRA of the advanced control rooms. (author)

Mixture design procedure for flexible base.

Science.gov (United States)

2013-04-01

This document provides information on mixture design requirements for a flexible base course. Sections : design requirements, job mix formula, contractor's responsibility, and engineer's responsibility. Tables : material requirements; requirements fo...

Operational procedures - industry observations and opportunities for improvement

International Nuclear Information System (INIS)

Davey, E.

2003-01-01

The purpose of this paper is to relate some of the commonly encountered problems with operational procedures in the nuclear industry and offer practical suggestions for their elimination. The paper is based on recent consultant experience in assisting industry clients with human performance related design and assessment initiatives. Operational procedures are a key part of an integrated system design. Procedures provide the specified instructions for actions people are to undertake in operating a facility to achieve production and safety goals. While organizations continue to make substantial investments in procedure development and maintenance, problems with procedures continue to occur, as evidenced through operating inefficiencies, errors, and events. The paper reviews the role procedures play in facility operations, comments on current development and maintenance practices, discusses the extent of human performance related problems attributed to procedure deficiencies, reviews commonly encountered problems with design and implementation of procedures, and offers suggestions on how some of these issues might be addressed in the future. (author)

A procedure for the determination of scenario earthquakes for seismic design based on probabilistic seismic hazard analysis

International Nuclear Information System (INIS)

Hirose, Jiro; Muramatsu, Ken

2002-03-01

This report presents a study on the procedures for the determination of scenario earthquakes for seismic design of nuclear power plants (NPPs) based on probabilistic seismic hazard analysis (PSHA). In the recent years, the use of PSHA, which is a part of seismic probabilistic safety assessment (PSA), to determine the design basis earthquake motions for NPPs has been proposed. The identified earthquakes are called probability-based scenario earthquakes (PBSEs). The concept of PBSEs originates both from the study of US NRC and from Ishikawa and Kameda. The assessment of PBSEs is composed of seismic hazard analysis and identification of dominant earthquakes. The objectives of this study are to formulate the concept of PBSEs and to examine the procedures for determining the PBSEs for a domestic NPP site. This report consists of three parts, namely, procedures to compile analytical conditions for PBSEs, an assessment to identify PBSEs for a model site using the Ishikawa's concept and the examination of uncertainties involved in analytical conditions. The results obtained from the examination of PBSEs using Ishikawa's concept are as follows. (a) Since PBSEs are expressed by hazard-consistent magnitude and distance in terms of a prescribed reference probability, it is easy to obtain a concrete image of earthquakes that determine the ground response spectrum to be considered in the design of NPPs. (b) Source contribution factors provide the information on the importance of the earthquake source regions and/or active faults, and allows the selection of a couple of PBSEs based on their importance to the site. (c) Since analytical conditions involve uncertainty, sensitivity analyses on uncertainties that would affect seismic hazard curves and identification of PBSEs were performed on various aspects and provided useful insights for assessment of PBSEs. A result from this sensitivity analysis was that, although the difference in selection of attenuation equations led to a

Specified assurance level sampling procedure

International Nuclear Information System (INIS)

Willner, O.

1980-11-01

In the nuclear industry design specifications for certain quality characteristics require that the final product be inspected by a sampling plan which can demonstrate product conformance to stated assurance levels. The Specified Assurance Level (SAL) Sampling Procedure has been developed to permit the direct selection of attribute sampling plans which can meet commonly used assurance levels. The SAL procedure contains sampling plans which yield the minimum sample size at stated assurance levels. The SAL procedure also provides sampling plans with acceptance numbers ranging from 0 to 10, thus, making available to the user a wide choice of plans all designed to comply with a stated assurance level

Expressive Design Tools: Procedural Content Generation for Game Designers

OpenAIRE

Smith, Gillian Margaret

2012-01-01

Games are shaped by the tools we use to make them and our ability to model the concepts they address. Vast improvements in computer graphics technology, processing power, storage capacity, and physics simulations have driven game design for the past forty years, leading to beautiful, spacious, detailed, and highly immersive worlds supporting games that are, for the most part, fundamentally about movement, collision, and other physics-based concepts. Designers use increasingly complex tools th...

Design Procedure and Fabrication of Reproducible Silicon Vernier Devices for High-Performance Refractive Index Sensing.

Science.gov (United States)

Troia, Benedetto; Khokhar, Ali Z; Nedeljkovic, Milos; Reynolds, Scott A; Hu, Youfang; Mashanovich, Goran Z; Passaro, Vittorio M N

2015-06-10

In this paper, we propose a generalized procedure for the design of integrated Vernier devices for high performance chemical and biochemical sensing. In particular, we demonstrate the accurate control of the most critical design and fabrication parameters of silicon-on-insulator cascade-coupled racetrack resonators operating in the second regime of the Vernier effect, around 1.55 μm. The experimental implementation of our design strategies has allowed a rigorous and reliable investigation of the influence of racetrack resonator and directional coupler dimensions as well as of waveguide process variability on the operation of Vernier devices. Figures of merit of our Vernier architectures have been measured experimentally, evidencing a high reproducibility and a very good agreement with the theoretical predictions, as also confirmed by relative errors even lower than 1%. Finally, a Vernier gain as high as 30.3, average insertion loss of 2.1 dB and extinction ratio up to 30 dB have been achieved.

Structural integrity and its role in nuclear safety: recent UK advances in the development of high temperature design procedures

International Nuclear Information System (INIS)

Townley, C.H.A.

1996-01-01

This paper takes the liquid metal fast breeder reactor as an example and identifies those topics where research has had a role to play in providing improved design rules. Many of the previously adopted procedures contained large amounts of pessimism to allow for uncertainties in the prediction of long-term structural behaviour. The aim has therefore been to gain an improved physical insight into the phenomena which govern performance and to develope less restrictive procedures which, at the same time, guarantee the high standards of integrity which are required. (orig.)

46 CFR 154.665 - Welding procedures.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Welding procedures. 154.665 Section 154.665 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS... Construction § 154.665 Welding procedures. Welding procedure tests for cargo tanks for a design temperature...

Development of design procedures for fast reactors in the United Kingdom

International Nuclear Information System (INIS)

Rose, R.T.; Tomkins, B.; Townley, C.H.A.

1989-01-01

A considerable amount of research has been carried out in the United Kingdom during the past two decades to quantify the factors which control the integrity of structural components. The work which has been aimed at understanding the performance of structures at high temperature, is particularly relevant to the Fast Reactor. At the same time, because of the need to demonstrate the tolerance to defects in the low temperature as well as the high temperature components, defect assessment criteria are also of great importance. Emphasis is now being given to the development of design procedures specifically for Fast Reactors, making use of the research so far completed. The United Kingdom proposals are being integrated with those from France, Federal Republic of Germany and Italy as part of the European collaborative venture. The paper outlines the major developments which are currently in hand, and brings up to date the review of United Kingdom activities presented at Tokyo in 1986. (author)

Can proceduralization support coping with the unexpected?

International Nuclear Information System (INIS)

Norros, Leena; Savioja, Paula; Liinasuo, Marja; Wahlstrom, Mikael

2014-01-01

Operations of safety critical industries unquestionably require a diversity of technical and organizational control measures to increase stability and predictability of the complex sociotechnical systems. Nevertheless, experiences from recent severe accidents and results of safety research have questioned the effectiveness of the prevailing safety management strategy that mainly relies on standardization and designed-in defenses. This paper discusses the identified need to balance between stability and flexibility in a concrete safety issue, i.e., proceduralization. The main research problem of our study is whether procedure guided practice can offer sufficient support for flexibility of operating activity. We shall frame our study with the help of a model that explains different aspects of procedures. We then elaborate how these different aspects were considered empirically in our 3-phase study. In the first study we interviewed 62 main control room operators and asked how they consider procedures to support balancing. In the second study we observed in detail 12 NPP operator crews' activity in a simulated loss-of-coolant accident. In a third study we inquired 5 procedure designers about their conceptions concerning procedure guidance in operator work. Drawing on either interview or behavioral data we analyzed the personnel's stance to the flexibility and stability balancing, and how the conceptions portray in the practices of procedure usage. Our results demonstrate that the operators are aware of the need for balancing flexibility and stability and consider successful balancing to represent 'good' professional action. In actual action many operators, however, tend towards more straightforward following of procedures. Designers also see the capability for balancing stability and flexibility as a key operator competence but describe actual acting simply as procedure-following. According to the documents of the nuclear community, procedure

Can proceduralization support coping with the unexpected?

Energy Technology Data Exchange (ETDEWEB)

Norros, Leena; Savioja, Paula; Liinasuo, Marja; Wahlstrom, Mikael [VTT Technical Research Centre of Finland, Vuorimiehentie (Finland)

2014-08-15

Operations of safety critical industries unquestionably require a diversity of technical and organizational control measures to increase stability and predictability of the complex sociotechnical systems. Nevertheless, experiences from recent severe accidents and results of safety research have questioned the effectiveness of the prevailing safety management strategy that mainly relies on standardization and designed-in defenses. This paper discusses the identified need to balance between stability and flexibility in a concrete safety issue, i.e., proceduralization. The main research problem of our study is whether procedure guided practice can offer sufficient support for flexibility of operating activity. We shall frame our study with the help of a model that explains different aspects of procedures. We then elaborate how these different aspects were considered empirically in our 3-phase study. In the first study we interviewed 62 main control room operators and asked how they consider procedures to support balancing. In the second study we observed in detail 12 NPP operator crews' activity in a simulated loss-of-coolant accident. In a third study we inquired 5 procedure designers about their conceptions concerning procedure guidance in operator work. Drawing on either interview or behavioral data we analyzed the personnel's stance to the flexibility and stability balancing, and how the conceptions portray in the practices of procedure usage. Our results demonstrate that the operators are aware of the need for balancing flexibility and stability and consider successful balancing to represent 'good' professional action. In actual action many operators, however, tend towards more straightforward following of procedures. Designers also see the capability for balancing stability and flexibility as a key operator competence but describe actual acting simply as procedure-following. According to the documents of the nuclear community, procedure

Application of a statistical thermal design procedure to evaluate the PWR DNBR safety analysis limits

International Nuclear Information System (INIS)

Robeyns, J.; Parmentier, F.; Peeters, G.

2001-01-01

In the framework of safety analysis for the Belgian nuclear power plants and for the reload compatibility studies, Tractebel Energy Engineering (TEE) has developed, to define a 95/95 DNBR criterion, a statistical thermal design method based on the analytical full statistical approach: the Statistical Thermal Design Procedure (STDP). In that methodology, each DNBR value in the core assemblies is calculated with an adapted CHF (Critical Heat Flux) correlation implemented in the sub-channel code Cobra for core thermal hydraulic analysis. The uncertainties of the correlation are represented by the statistical parameters calculated from an experimental database. The main objective of a sub-channel analysis is to prove that in all class 1 and class 2 situations, the minimum DNBR (Departure from Nucleate Boiling Ratio) remains higher than the Safety Analysis Limit (SAL). The SAL value is calculated from the Statistical Design Limit (SDL) value adjusted with some penalties and deterministic factors. The search of a realistic value for the SDL is the objective of the statistical thermal design methods. In this report, we apply a full statistical approach to define the DNBR criterion or SDL (Statistical Design Limit) with the strict observance of the design criteria defined in the Standard Review Plan. The same statistical approach is used to define the expected number of rods experiencing DNB. (author)

Judicial problems in connection with preliminary decision and construction design approval in nuclear licensing procedures

International Nuclear Information System (INIS)

Schmieder, K.

1977-01-01

Standardization in nuclear engineering makes two demands on a legal instrument which is to make this standardization possible and which is to promote standardization in the nuclear licensing practice: On the basis of just one licence for a constructional part or a component, its applicability in any number of subsequent facility licensing procedures has to be warranted, and by virtue of its binding effect, standardization has to create a sufficiently big confidence protection with manufacturers, constructioneers and operators to offer sufficiently effective incentives for standardization. The nuclear preliminary decision pursuant to section 7 a of the Atomic Energy Act in the form of the component preliminary decision appears to be unsuitable as a legal instrument for standardization, as the preliminary decision refers exclusively to the construction of a concrete facility. For standardization in reactor engineering, the construction design approval appears to be basically the proper legal instrument on account of its legal structure as well as its economic effect. Its binding effect encouters a limitation with regard to third parties in so far that this limitation could question again the binding effect in a subsequent site-dependent nuclear licence procedure. The legal structure of the extent of the binding effect, which is decisive for the suitability of the construction design approval, lies with the legislator. The following questions have to be regulated: Ought the applicant to have a legal claim on the granting of a construction design approval, or ought it to be at the discretion of the authorities, and secondly, the extent of the binding effect in terms of time on the basis of the fixation of a time limit, or on the basis of the possibility of subsequent conditions to be imposed, or the revocation. (orig./HP) [de

Multiple position borehole extensometer procedure: Final draft

International Nuclear Information System (INIS)

1986-08-01

The purpose of the Multiple Position Borehole Extensometer Procedure is to provide detailed information for MPBXs installed at the salt Deaf Smith County ESF. This procedure includes design of equipment, installation, instructions, instrument locations, measurement requirements, support requirements, quality assurance procedures, and data acquisition requirements. Data reduction procedures are also discussed; however, the relevance of the data is discussed elsewhere in the appropriate test plans. Sufficient detail is provided in this procedure to allow for integrating the requirements of this procedure into both the facility construction and overall underground testing programs; identifying necessary equipment for procurement; determining data acquisition requirements as input to Automatic Data Acquisition System (ADAS) design; providing step-by-step procedures for training personnel as well as for directing field operations; establishing quality assurance (QA) checkpoints and implementation methods; and defining data reduction methods and providing the anticipated accuracy of the system. 11 refs., 14 figs

Standards for radiation protection instrumentation: design of safety standards and testing procedures

International Nuclear Information System (INIS)

Meissner, Frank

2008-01-01

This paper describes by means of examples the role of safety standards for radiation protection and the testing and qualification procedures. The development and qualification of radiation protection instrumentation is a significant part of the work of TUV NORD SysTec, an independent expert organisation in Germany. The German Nuclear Safety Standards Commission (KTA) establishes regulations in the field of nuclear safety. The examples presented may be of importance for governments and nuclear safety authorities, for nuclear operators and for manufacturers worldwide. They demonstrate the advantage of standards in the design of radiation protection instrumentation for new power plants, in the upgrade of existing instrumentation to nuclear safety standards or in the application of safety standards to newly developed equipment. Furthermore, they show how authorities may proceed when safety standards for radiation protection instrumentation are not yet established or require actualization. (author)

Human factoring administrative procedures

International Nuclear Information System (INIS)

Grider, D.A.; Sturdivant, M.H.

1991-01-01

In nonnuclear business, administrative procedures bring to mind such mundane topics as filing correspondence and scheduling vacation time. In the nuclear industry, on the other hand, administrative procedures play a vital role in assuring the safe operation of a facility. For some time now, industry focus has been on improving technical procedures. Significant efforts are under way to produce technical procedure requires that a validated technical, regulatory, and administrative basis be developed and that the technical process be established for each procedure. Producing usable technical procedures requires that procedure presentation be engineered to the same human factors principles used in control room design. The vital safety role of administrative procedures requires that they be just as sound, just a rigorously formulated, and documented as technical procedures. Procedure programs at the Tennessee Valley Authority and at Boston Edison's Pilgrim Station demonstrate that human factors engineering techniques can be applied effectively to technical procedures. With a few modifications, those same techniques can be used to produce more effective administrative procedures. Efforts are under way at the US Department of Energy Nuclear Weapons Complex and at some utilities (Boston Edison, for instance) to apply human factors engineering to administrative procedures: The techniques being adapted include the following

Design procedure for formulating and assessing the durability of particulate grouts

International Nuclear Information System (INIS)

Okonkwo, I.O.; Altschaeff, A.G.

1989-01-01

The current disposal plans for low-level wastes call for stabilizing or encapsulating and storing of these wastes in steel drums which in turn are buried in shallow trenches. Complete sealing is accomplished with grout, a liquid injection comprising principally of cement and fly ash, etc. Upon solidification, the grout forms a rigid mass around the drum, thereby eliminating access of groundwater into or out of the waste barrier, or leaching of radionuclides. Since the primary mechanism for the likely introduction of hazardous and/or radioactive elements into the biosphere in this situation, is through physical or chemical deterioration of the waste barrier, it is necessary that the effect of adverse environments on the durability of the grouts be examined and incorporated in barrier design. Currently, procedures for formulating grout mixes to assure a given impermeability or durability of the grout over its service period is lacking, and so are the techniques for monitoring the in-service performance of waste barrier systems. This paper depicts a serious limitation in waste barrier system technology, for it is time that optimization in design be possible. To allow this, a method is needed that creates the grout formulation specification for an optimization of behavior parameters in the resulting product. These considerations suggest a strong need for improvement in the grout formulation specification to allow a focus upon behavior properties desired by the engineer in the creation of optimum performance. This paper addresses these problems

Listening Comprehension: Approach, Design, Procedure.

Science.gov (United States)

Richards, Jack C.

1983-01-01

Three dimensions in the teaching of listening comprehension are outlined: (1) a theory is presented that takes account of the cognitive processes used (approach); (2) listeners' needs are analyzed and a taxonomy of microskills and objectives for teaching them are proposed (design); and (3) classroom exercises and activities are suggested…

Procedural Personas for Player Decision Modeling and Procedural Content Generation

DEFF Research Database (Denmark)

Holmgård, Christoffer

2016-01-01

." These methods for constructing procedural personas are then integrated with existing procedural content generation systems, acting as critics that shape the output of these systems, optimizing generated content for different personas and by extension, different kinds of players and their decision making styles......How can player models and artificially intelligent (AI) agents be useful in early-stage iterative game and simulation design? One answer may be as ways of generating synthetic play-test data, before a game or level has ever seen a player, or when the sampled amount of play test data is very low....... This thesis explores methods for creating low-complexity, easily interpretable, generative AI agents for use in game and simulation design. Based on insights from decision theory and behavioral economics, the thesis investigates how player decision making styles may be defined, operationalised, and measured...

Comparison of closed-cell and hybrid-cell stent designs in carotid artery stenting: clinical and procedural outcomes

Directory of Open Access Journals (Sweden)

Ersan TatlI

2017-05-01

Full Text Available Introduction: Carotid artery stenting (CAS is a promising alternative to surgery in high-risk patients. However, the impact of stent cell design on outcomes in CAS is a matter of continued debate. Aim : To compare the periprocedural and clinical outcomes of different stent designs for CAS with distal protection devices. Material and methods : All CAS procedures with both closed- and hybrid-cell stents performed at our institution between February 2010 and December 2015 were analyzed retrospectively. Adverse events were defined as death, major stroke, minor stroke, transient ischemic attack and myocardial infarction. Periprocedural and 30-day adverse events and internal carotid artery (ICA vasospasm rates were compared between the closed-cell and hybrid-cell stent groups. Results : The study included 234 patients comprising 146 patients with a closed-cell stent (Xact stent, Abbott Vascular (mean age: 68.5 ±8.6; 67.1% male and 88 patients with a hybrid-cell stent (Cristallo Ideale, Medtronic (mean age: 67.2 ±12.8; 68.2% male. There was no significant difference between the groups with respect to periprocedural or 30-day adverse event rates. While there was no difference in terms of tortuosity index between the groups, there was a higher procedural ICA vasospasm rate in the closed-cell stent group (35 patients, 23% compared with the hybrid-cell stent group (10 patients, 11% (p = 0.017. Conclusions : The results of this study showed no significant difference in the clinical adverse event rates after CAS between the closed-cell stent group and the hybrid-cell stent group. However, procedural ICA vasospasm was more common in the closed-cell stent group.

Kardiopulmonální resuscitace - vybavení pomůckami (metodika, stav pomůcek)

OpenAIRE

Fialová, Kateřina

2008-01-01

In the theory part I was dealing with history of resuscitation from the prehistory to Guidelines 2000 and with the recomended procedure in resuscitation guidelines 2005.After that I wrote up the equipment which is used for the advanced cardiopulmonary resuscitation. In the last part I was taking a think about legislativity which is conected with providing the laic and advanced cardiopulmonary resuscitation. The second, empiric part is researching the whole equipment (facilitations, gear and d...

Vision based flight procedure stereo display system

Science.gov (United States)

Shen, Xiaoyun; Wan, Di; Ma, Lan; He, Yuncheng

2008-03-01

A virtual reality flight procedure vision system is introduced in this paper. The digital flight map database is established based on the Geographic Information System (GIS) and high definitions satellite remote sensing photos. The flight approaching area database is established through computer 3D modeling system and GIS. The area texture is generated from the remote sensing photos and aerial photographs in various level of detail. According to the flight approaching procedure, the flight navigation information is linked to the database. The flight approaching area vision can be dynamic displayed according to the designed flight procedure. The flight approaching area images are rendered in 2 channels, one for left eye images and the others for right eye images. Through the polarized stereoscopic projection system, the pilots and aircrew can get the vivid 3D vision of the flight destination approaching area. Take the use of this system in pilots preflight preparation procedure, the aircrew can get more vivid information along the flight destination approaching area. This system can improve the aviator's self-confidence before he carries out the flight mission, accordingly, the flight safety is improved. This system is also useful in validate the visual flight procedure design, and it helps to the flight procedure design.

A conceptual application for computer-based procedures for handheld devices

Energy Technology Data Exchange (ETDEWEB)

Sofie, Lunde-Hanssen Linda [Industrial Psychology, Institute for Energy Technology, Halden (Norway)

2014-08-15

This paper describes the concepts and proposed design principles for an application for computer-based procedures (CBPs) for field operators in the nuclear domain (so-called handheld procedures). The concept is focused on the field operators' work with procedures and the communication and coordination between field operators and control room operators. The goal is to overcome challenges with shared situation awareness (SA) in a distributed team by providing effective and usable information design. An iterative design method and user-centred design is used for tailoring the concept to the context of field operations. The resulting concept supports the execution of procedures where close collaboration is needed between control room and field operations, e.g. where particular procedure steps are executed from remote control points and others from the control room. The resulting conceptual application for CBPs on handheld devices is developed for mitigating the SA challenges and designing for usability and ease of use.

A conceptual application for computer-based procedures for handheld devices

International Nuclear Information System (INIS)

Sofie, Lunde-Hanssen Linda

2014-01-01

This paper describes the concepts and proposed design principles for an application for computer-based procedures (CBPs) for field operators in the nuclear domain (so-called handheld procedures). The concept is focused on the field operators' work with procedures and the communication and coordination between field operators and control room operators. The goal is to overcome challenges with shared situation awareness (SA) in a distributed team by providing effective and usable information design. An iterative design method and user-centred design is used for tailoring the concept to the context of field operations. The resulting concept supports the execution of procedures where close collaboration is needed between control room and field operations, e.g. where particular procedure steps are executed from remote control points and others from the control room. The resulting conceptual application for CBPs on handheld devices is developed for mitigating the SA challenges and designing for usability and ease of use

Efficiency of performing pulmonary procedures in a shared endoscopy unit: procedure time, turnaround time, delays, and procedure waiting time.

Science.gov (United States)

Verma, Akash; Lee, Mui Yok; Wang, Chunhong; Hussein, Nurmalah B M; Selvi, Kalai; Tee, Augustine

2014-04-01

The purpose of this study was to assess the efficiency of performing pulmonary procedures in the endoscopy unit in a large teaching hospital. A prospective study from May 20 to July 19, 2013, was designed. The main outcome measures were procedure delays and their reasons, duration of procedural steps starting from patient's arrival to endoscopy unit, turnaround time, total case durations, and procedure wait time. A total of 65 procedures were observed. The most common procedure was BAL (61%) followed by TBLB (31%). Overall procedures for 35 (53.8%) of 65 patients were delayed by ≥ 30 minutes, 21/35 (60%) because of "spillover" of the gastrointestinal and surgical cases into the time block of pulmonary procedure. Time elapsed between end of pulmonary procedure and start of the next procedure was ≥ 30 minutes in 8/51 (16%) of cases. In 18/51 (35%) patients there was no next case in the room after completion of the pulmonary procedure. The average idle time of the room after the end of pulmonary procedure and start of next case or end of shift at 5:00 PM if no next case was 58 ± 53 minutes. In 17/51 (33%) patients the room's idle time was >60 minutes. A total of 52.3% of patients had the wait time >2 days and 11% had it ≥ 6 days, reason in 15/21 (71%) being unavailability of the slot. Most pulmonary procedures were delayed due to spillover of the gastrointestinal and surgical cases into the block time allocated to pulmonary procedures. The most common reason for difficulty encountered in scheduling the pulmonary procedure was slot unavailability. This caused increased procedure waiting time. The strategies to reduce procedure delays and turnaround times, along with improved scheduling methods, may have a favorable impact on the volume of procedures performed in the unit thereby optimizing the existing resources.

Nuclear materials management procedures

International Nuclear Information System (INIS)

Veevers, K.; Silver, J.M.; Quealy, K.J.; Steege, E. van der.

1987-10-01

This manual describes the procedures for the management of nuclear materials and associated materials at the Lucas Heights Research Laboratories. The procedures are designed to comply with Australia's nuclear non-proliferation obligations to the International Atomic Energy Agency (IAEA), bilateral agreements with other countries and ANSTO's responsibilities under the Nuclear Non-Proliferation (Safeguards) Act, 1987. The manual replaces those issued by the Australian Atomic Energy Commission in 1959, 1960 and 1969

HIGH QUALITY ENVIRONMENTAL PRINCIPLES APPLIED TO THE ARCHITECTONIC DESIGN SELECTION PROCEDURE: THE NUTRE LAB CASE

Directory of Open Access Journals (Sweden)

Claudia Barroso Krause

2012-06-01

Full Text Available The need to produce more sustainable buildings has been influencing the design decisions all over the world. That’s why it is imperative, in Brazil, the development of strategies and method to aid the decision making during the design process, focused on high quality environmental. This paper presents a decision support tool based on the principles of sustainable construction developed by the Project, Architecture and Sustainability Research Group (GPAS of Federal University of Rio de Janeiro – Brazil. The methodology has been developed for the selection of a preliminary design of a laboratory to be built at Rio Technology Park at the University campus. The support provided by GPAS occurred in three stages: the elaboration of the Reference Guide for the competitors, the development of a methodology to evaluate the proposed solutions (based on environmental performance criteria and the assistance of the members of jury in the trial phase. The theoretical framework was based upon the concepts of the bioclimatic architecture, the procedures specified by the certification HQE® (Haute Qualité Environnementale and the method suggested by the ADDENDA® architecture office. The success of this experience points out the possibility to future application in similar cases.

Procedure automation: the effect of automated procedure execution on situation awareness and human performance

International Nuclear Information System (INIS)

Andresen, Gisle; Svengren, Haakan; Heimdal, Jan O.; Nilsen, Svein; Hulsund, John-Einar; Bisio, Rossella; Debroise, Xavier

2004-04-01

As advised by the procedure workshop convened in Halden in 2000, the Halden Project conducted an experiment on the effect of automation of Computerised Procedure Systems (CPS) on situation awareness and human performance. The expected outcome of the study was to provide input for guidance on CPS design, and to support the Halden Project's ongoing research on human reliability analysis. The experiment was performed in HAMMLAB using the HAMBO BWR simulator and the COPMA-III CPS. Eight crews of operators from Forsmark 3 and Oskarshamn 3 participated. Three research questions were investigated: 1) Does procedure automation create Out-Of-The-Loop (OOTL) performance problems? 2) Does procedure automation affect situation awareness? 3) Does procedure automation affect crew performance? The independent variable, 'procedure configuration', had four levels: paper procedures, manual CPS, automation with breaks, and full automation. The results showed that the operators experienced OOTL problems in full automation, but that situation awareness and crew performance (response time) were not affected. One possible explanation for this is that the operators monitored the automated procedure execution conscientiously, something which may have prevented the OOTL problems from having negative effects on situation awareness and crew performance. In a debriefing session, the operators clearly expressed their dislike for the full automation condition, but that automation with breaks could be suitable for some tasks. The main reason why the operators did not like the full automation was that they did not feel being in control. A qualitative analysis addressing factors contributing to response time delays revealed that OOTL problems did not seem to cause delays, but that some delays could be explained by the operators having problems with the freeze function of the CPS. Also other factors such as teamwork and operator tendencies were of importance. Several design implications were drawn

Operating procedure automation to enhance safety of nuclear power plants

International Nuclear Information System (INIS)

Husseiny, A.A.; Sabri, Z.A.; Adams, S.K.; Rodriguez, R.J.; Packer, D.; Holmes, J.W.

1989-01-01

Use of logic statements and computer assist are explored as means for automation and improvement on design of operating procedures including those employed in abnormal and emergency situations. Operating procedures for downpower and loss of forced circulation are used for demonstration. Human-factors analysis is performed on generic emergency operating procedures for three strategies of control; manual, semi-automatic and automatic, using standard emergency operating procedures. Such preliminary analysis shows that automation of procedures is feasible provided that fault-tolerant software and hardware become available for design of the controllers. Recommendations are provided for tests to substantiate the promise of enhancement of plant safety. Adequate design of operating procedures through automation may alleviate several major operational problems of nuclear power plants. Also, automation of procedures is necessary for partial or overall automatic control of plants. Fully automatic operations are needed for space applications while supervised automation of land-based and offshore plants may become the thrust of new generation of nulcear power plants. (orig.)

A robust procedure for comparing multiple means under heteroscedasticity in unbalanced designs.

Directory of Open Access Journals (Sweden)

Esther Herberich

2010-03-01

Full Text Available Investigating differences between means of more than two groups or experimental conditions is a routine research question addressed in biology. In order to assess differences statistically, multiple comparison procedures are applied. The most prominent procedures of this type, the Dunnett and Tukey-Kramer test, control the probability of reporting at least one false positive result when the data are normally distributed and when the sample sizes and variances do not differ between groups. All three assumptions are non-realistic in biological research and any violation leads to an increased number of reported false positive results. Based on a general statistical framework for simultaneous inference and robust covariance estimators we propose a new statistical multiple comparison procedure for assessing multiple means. In contrast to the Dunnett or Tukey-Kramer tests, no assumptions regarding the distribution, sample sizes or variance homogeneity are necessary. The performance of the new procedure is assessed by means of its familywise error rate and power under different distributions. The practical merits are demonstrated by a reanalysis of fatty acid phenotypes of the bacterium Bacillus simplex from the "Evolution Canyons" I and II in Israel. The simulation results show that even under severely varying variances, the procedure controls the number of false positive findings very well. Thus, the here presented procedure works well under biologically realistic scenarios of unbalanced group sizes, non-normality and heteroscedasticity.

Description of design and operating procedures of small scale pulsed columns for experimental study on extraction process under abnormal conditions

International Nuclear Information System (INIS)

Wakamatsu, Sachio; Sato, Makoto; Kubo, Nobuo; Sakurai, Satoshi; Ami, Norio

1990-09-01

To study transient phenomena in a pulsed column co-decontamination process under abnormal conditions, a pair of small scale pulsed columns (effective extraction section; I.D: 25 mm, H.: 2260 mm) for extraction and scrub were installed in the laboratory. An evaporator of aqueous uranium solution was also equipped to reuse concentrated solution as the feed. This report describes several items to have been carefully treated in design, specification and operating procedure of the apparatuses for the experiments. Also described are the procedures for preparation of the feed solutions and treatments of the solutions after the experiments; back-extraction of uranium, diluent washing, alkaline washing and concentration of uranium solution. (author)

Mechanical Design, Brazing and Assembly Procedures of the LINAC4 RFQ

CERN Document Server

Mathot, S; Briswalter, A; Callamand, Th; Carosone, J; Favre, N; Geisser, J M; Lombardi, A; Maire, V; Malabaila, M; Pugnat, D; Richerot, Ph; Riffaut, B; Rossi, C; Timmins, M; Vacca, A; Vandoni, G; Vretenar, M

2010-01-01

The Linac4 RFQ will accelerate the H- beam from the ion source to the energy of 3 MeV. The RFQ is composed of three sections of one meter each, assembled by means of ultra high vacuum flanges and adjustable centring rings. The complete 3-m long RFQ will be supported isostatically over 3 points like a simple beam in order to minimise the maximum deflection. The ridge line, used to feed the RF power into the RFQ, will be supported via springs and its position adjusted in such way that no strain is introduced into the RFQ at the moment of its connection. The mechanical design has been done at CERN where the modules are completely manufactured, heat treated and brazed also. In that way, all of the processes are carefully controlled and the influence, notably of the heat treatments, has been understood in a better way. Since 2002 several four vanes RFQ modules have been brazed at CERN for the TRASCO and IPHI projects. A two-step brazing procedure has been tested. This technique is actually used for the assembly of...

Unexpected effects of computer presented procedures

International Nuclear Information System (INIS)

Blackman, H.S.; Nelson, W.R.

1988-01-01

Results from experiments conducted at the Idaho National Engineering Laboratory have been presented regarding the computer presentation of procedural information. The results come from the experimental evaluation of an expert system which presented procedural instructions to be performed by a nuclear power plant operator. Lessons learned and implications from the study are discussed as well as design issues that should be considered to avoid some of the pitfalls in computer presented or selected procedures

The TOMAX-procedure

NARCIS (Netherlands)

Overgoor, M.L.E.

2015-01-01

Most patients with a low spinal lesion (LSL) have intact erectile function but no penile sensation, which can lead to frustration. To tackle this problem, we designed TOMAX, TOMAXimize sensation, sexuality and quality of life, a surgical procedure in which a functional "groin” nerve is connected to

45 CFR 1151.43 - Adoption of grievance procedures.

Science.gov (United States)

2010-10-01

... Enforcement § 1151.43 Adoption of grievance procedures. A recipient may adopt an internal grievance procedure... prohibited by this part. A responsible official should be designated to coordinate the recipient's efforts in connection with this section. Such procedures need not be established with respect to complaints from...

design chart procedures for polygonal concrete-filled steel columns

African Journals Online (AJOL)

ADMIN

hexagonal and octagonal steel-concrete composite columns subjected to ... This paper also outlines procedures that will enable preparation of ... buildings and in a variety of large-span building ... Likewise, hot-rolled steel tubes are used while ... small moderate large. Fig. 2. Possible arrangement of composite polygonal ...

Correction: General optimization procedure towards the design of a new family of minimal parameter spin-component-scaled double-hybrid density functional theory.

Science.gov (United States)

Roch, Loïc M; Baldridge, Kim K

2018-02-07

Correction for 'General optimization procedure towards the design of a new family of minimal parameter spin-component-scaled double-hybrid density functional theory' by Loïc M. Roch and Kim K. Baldridge, Phys. Chem. Chem. Phys., 2017, 19, 26191-26200.

The design, effectiveness and acceptability of the arm sleeve for the prevention of body fluid contamination during obstetric procedures.

Science.gov (United States)

Kabukoba, J J; Pearce, J M

1993-08-01

1. To design a device that would reduce contamination of staff during obstetric procedures. 2. To undertake clinical trials to assess the effectiveness and acceptability of such a device. A prospective study. The arm sleeve is made of a nonwoven material laminated on polyethylene film making it waterproof. It has an elastomeric cuff with adhesive that ensures a watertight seal between it and the glove. Delivery suite in a teaching hospital. Doctors and midwives were requested to wear the sleeve on top of the standard gown and gloves. Each user was assessed for blood contamination at the end of the procedure and a questionnaire detailing the extent of contamination and the views of the user was completed. Eighty questionnaires were completed. The contamination of arms and hands was 3.8% and 5%, respectively. Eighty-nine percent thought the sleeve had served its purpose and 76% said they would use it regularly. The sleeve is an effective protective device which complements the glove and gown. We recommend that it should be used during all obstetric procedures.

Unexpected effects of computer presented procedures

International Nuclear Information System (INIS)

Blackman, H.S.; Nelson, W.R.

1988-01-01

Results from experiments conducted at the Idaho National Engineering Laboratory will be presented regarding the computer presentation of procedural information. The results come from the experimental evaluation of an expert system which presented procedural instructions to be performed by a nuclear power plant operator. Lessons learned and implications from the study will be discussed as well as design issues that should be considered to avoid some of the pitfalls in computer presented or selected procedures. 1 ref., 1 fig

Procedures for the design of the main mechanical components of a wind system; Dimensionamento dos componentes mecanicos principais de aerogeradores

Energy Technology Data Exchange (ETDEWEB)

Hirata, M.H.; Marco Filho, F. de [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

1990-12-31

Procedures for the design of the main mechanical components of a wind system were developed. One of the main concerns was related to the possibility of its use in small micro-computers. This goal was reached and an APPLE II computer was used. The resulting algorithm permits a friendly interaction between man and machine. 5 refs., 12 figs

Accurate monitoring developed by EDF for FA-3-EPRTM and UK-EPRTM: chemistry-radiochemistry design and procedures

International Nuclear Information System (INIS)

Tigeras, Arancha; Bouhrizi, Sofia; Pierre, Marine; L'Orphelin, Jean-Matthieu

2012-09-01

The monitoring of chemistry and radiochemistry parameters is a fundamental need in nuclear power plants in order to ensure: - The reactivity control in real time, - The barrier integrity surveillance by means of the fuel cladding failures detection and the primary-pressure boundary components control, - The water quality to limit the radiation build-up and the material corrosion permitting to prepare the maintenance, radioprotection and waste operations. - The efficiency of treatment systems and hence the minimization of chemical and radiochemical substances discharges The relevant chemistry and radiochemistry parameters to be monitored are selected depending on the chemistry conditioning of systems, the source term evaluations, the corrosion mechanisms and the radioactivity consequences. In spite of the difficulties for obtaining representative samples under all circumstances, the EPR M design provides the appropriate provisions and analytical procedures for ensuring the reliable and accurate monitoring of parameters in compliance with the specification requirements. The design solutions, adopted for Flamanville 3-EPR M and UK-EPR M , concerning the sampling conditions and locations, the on-line and analytical equipment, the procedures and the results transmission to control room and chemistry laboratory are supported by ALARP considerations, international experience and researches concerning the nuclides behavior (corrosion product and actinides solubility, fission product degassing, impurities and additives reactions also). This paper details the means developed by EDF for making successful and meaningful sampling and measurements to achieve the essential objectives associated with the monitoring. (authors)

Seriacion: Un Procedimiento De Aprendizaje (Seriation: A Learning Procedure.)

Science.gov (United States)

Mejia, Mercedes; And Others

The development and application of a learning procedure for the seriation structure of children in the oscilatory state are described. The procedure was based on the structural genetic theory of learning. A study consisting of design and verification stages was carried out in Cali, Colombia. In the design stage six seriation treatments involving…

Development of symptoms-oriented operating procedures

International Nuclear Information System (INIS)

Colquhoun, R.

1984-01-01

Until recently, the formal treatment of control room procedures for upset conditions in nuclear power plants has been event-oriented. This orientation was not so much a reflection of power plant operating practice as it was a reflection of design-oriented thinking - design-basis events, therefore event-oriented procedures. Event orientation is not common in other professions. In the medical profession, for example, the stabilization of vital functions through a symptoms-oriented approach has priority over diagnosis and prognosis. The American nuclear power industry has initiated programs for the development and application of a symptoms-oriented approach for handling upset conditions. Canadian programs have independently paralleled the US programs. This article describes the rationale and current applications of the Canadian programs and identifies the relevance of a generic symptoms-based emergency procedure to current operating practices

A procedure for building product models

DEFF Research Database (Denmark)

Hvam, Lars; Riis, Jesper; Malis, Martin

2001-01-01

This article presents a procedure for building product models to support the specification processes dealing with sales, design of product variants and production preparation. The procedure includes, as the first phase, an analysis and redesign of the business processes, which are to be supported...... with product models. The next phase includes an analysis of the product assortment, and the set up of a so-called product master. Finally the product model is designed and implemented using object oriented modelling. The procedure is developed in order to ensure that the product models constructed are fit...... for the business processes they support, and properly structured and documented, in order to facilitate that the systems can be maintained continually and further developed. The research has been carried out at the Centre for Industrialisation of Engineering, Department of Manufacturing Engineering, Technical...

Acceptance test procedure for Project W-280

International Nuclear Information System (INIS)

Stites, C.G.

1994-01-01

This Document is the Acceptance Test Procedure for 200 Area C and SY Tank Farm Lighting Upgrade. This Acceptance Test Procedure has been prepared to demonstrate that the Tank Farm Lighting Systems function correctly as required by project criteria and as intended by design

Weld Design, Testing, and Assessment Procedures for High Strength Pipelines

Science.gov (United States)

2011-12-20

Long-distance high-strength pipelines are increasingly being constructed for the efficient transportation of energy products. While the high-strength linepipe steels and high productivity welding processes are being applied, the procedures employed f...

Designing experimental setup and procedures for studying alpha-particle-induced adaptive response in zebrafish embryos in vivo

Energy Technology Data Exchange (ETDEWEB)

Choi, V.W.Y.; Lam, R.K.K.; Chong, E.Y.W. [Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong (Hong Kong); Cheng, S.H. [Department of Biology and Chemistry, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong (Hong Kong); Yu, K.N., E-mail: peter.yu@cityu.edu.h [Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong (Hong Kong)

2010-03-15

The present work was devoted to designing the experimental setup and the associated procedures for alpha-particle-induced adaptive response in zebrafish embryos in vivo. Thin PADC films with a thickness of 16 mum were fabricated and employed as support substrates for holding dechorionated zebrafish embryos for alpha-particle irradiation from the bottom through the films. Embryos were collected within 15 min when the light photoperiod began, which were then incubated and dechorionated at 4 h post fertilization (hpf). They were then irradiated at 5 hpf by alpha particles using a planar {sup 241}Am source with an activity of 0.1151 muCi for 24 s (priming dose), and subsequently at 10 hpf using the same source for 240 s (challenging dose). The levels of apoptosis in irradiated zebrafish embryos at 24 hpf were quantified through staining with the vital dye acridine orange, followed by counting the stained cells under a florescent microscope. The results revealed the presence of the adaptive response in zebrafish embryos in vivo, and demonstrated the feasibility of the adopted experimental setup and procedures.

R20 programme: Development of rock grouting design, techniques and procedures for ONKALO

International Nuclear Information System (INIS)

Sievaenen, U.

2009-02-01

Posiva Oy constructs an underground research facility ONKALO at Olkiluoto in Eurajoki. ONKALO is planned to be a part of the deep repository for the high level nuclear waste. Posiva Oy set up R20-programme for the years 2006-2008, with the target of having an acceptable grouting methodology in ONKALO. The programme was divided into three projects and the work and results of Technique-project is presented in this report. The implementation of the results (grouting design and execution) was outlined from the project. That work is under the responsibility of construction of the ONKALO-project. The Grouting Technique -project (INKE) studied the grouting experiences obtained from the first 2 km of the ONKALO access tunnel, searched for suitable grouting design approaches, carried out two grouting tests and one pilot grouting test with colloidal silica in ONKALO, analysed the expected grouting conditions in deep rock from the grouting point of view, studied the feasibility of so called optimal design solution in the expected grouting conditions. Based on these studies recommendations concerning the grouting design, design solutions for different rock conditions, grouting procedures, grouting stop criteria, the characterisation methods for grouting purposes, grouting materials and grouting work performance are presented. Swedish Time Stop Grouting, also named Grouting Time-Method was selected to be studied and used in this project and it was further developed. This work compiles the outcome of the project subtasks and presents the recommendations for developing the grouting in ONKALO. The key conclusion of this work are: (1) Grouting Time-method (time stop grouting) alone is not enough to be used as a grouting stop criterion due to the uncertainties related to the source parameters (fracture characteristics, rheological properties of grouts); these cause too high uncertainties when proving the sealing result via the grouting time, (2) due to the uncertainties related to

5 CFR 5502.105 - Agency procedures.

Science.gov (United States)

2010-01-01

....105 Administrative Personnel DEPARTMENT OF HEALTH AND HUMAN SERVICES SUPPLEMENTAL FINANCIAL DISCLOSURE REQUIREMENTS FOR EMPLOYEES OF THE DEPARTMENT OF HEALTH AND HUMAN SERVICES § 5502.105 Agency procedures. (a) The designated agency ethics official or, with the concurrence of the designated agency ethics official, each of...

Assembly tool design

International Nuclear Information System (INIS)

Kanamori, Naokazu; Nakahira, Masataka; Ohkawa, Yoshinao; Tada, Eisuke; Seki, Masahiro

1996-06-01

The reactor core of the International Thermonuclear Experimental Reactor (ITER) is assembled with a number of large and asymmetric components within a tight tolerance in order to assure the structural integrity for various loads and to provide the tritium confinement. In addition, the assembly procedure should be compatible with remote operation since the core structures will be activated by 14-MeV neutrons once it starts operation and thus personal access will be prohibited. Accordingly, the assembly procedure and tool design are quite essential and should be designed from the beginning to facilitate remote operation. According to the ITER Design Task Agreement, the Japan Atomic Energy Research Institute (JAERI) has performed design study to develop the assembly procedures and associated tool design for the ITER tokamak assembly. This report describes outlines of the assembly tools and the remaining issues obtained in this design study. (author)

47 CFR 80.331 - Bridge-to-bridge communication procedure.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Bridge-to-bridge communication procedure. 80..., Alarm, Urgency and Safety Procedures § 80.331 Bridge-to-bridge communication procedure. (a) Vessels subject to the Bridge-to-Bridge Act transmitting on the designated navigational frequency must conduct...

General optimization procedure towards the design of a new family of minimal parameter spin-component-scaled double-hybrid density functional theory.

Science.gov (United States)

Roch, Loïc M; Baldridge, Kim K

2017-10-04

A general optimization procedure towards the development and implementation of a new family of minimal parameter spin-component-scaled double-hybrid (mSD) density functional theory (DFT) is presented. The nature of the proposed exchange-correlation functional establishes a methodology with minimal empiricism. This new family of double-hybrid (DH) density functionals is demonstrated using the PBEPBE functional, illustrating the optimization procedure to the mSD-PBEPBE method, and the performance characteristics shown for a set of non-covalent complexes covering a broad regime of weak interactions. With only two parameters, mSD-PBEPBE and its cost-effective counterpart, RI-mSD-PBEPBE, show a mean absolute error of ca. 0.4 kcal mol -1 averaged over 66 weak interacting systems. Following a successive 2D-grid refinement for a CBS extrapolation of the coefficients, the optimization procedure can be recommended for the design and implementation of a variety of additional DH methods using any of the plethora of currently available functionals.

Využití Balanced ScoreCard k měření výkonnosti procesů agentury CzechTrade

OpenAIRE

Achrerová, Gabriela Bc.

2007-01-01

Teoretická část: měření výkonnosti procesů v systémech managementu jakosti dle ISO 9001:2000 Aplikační část: charakteristika agentury, procesy agentury, stávající metodika Balanced ScoreCard, návrh nové metodiky Balanced ScoreCard v návaznosti na novou strategii

Equating Multidimensional Tests under a Random Groups Design: A Comparison of Various Equating Procedures

Science.gov (United States)

Lee, Eunjung

2013-01-01

The purpose of this research was to compare the equating performance of various equating procedures for the multidimensional tests. To examine the various equating procedures, simulated data sets were used that were generated based on a multidimensional item response theory (MIRT) framework. Various equating procedures were examined, including…

Structured Analog CMOS Design

CERN Document Server

Stefanovic, Danica

2008-01-01

Structured Analog CMOS Design describes a structured analog design approach that makes it possible to simplify complex analog design problems and develop a design strategy that can be used for the design of large number of analog cells. It intentionally avoids treating the analog design as a mathematical problem, developing a design procedure based on the understanding of device physics and approximations that give insight into parameter interdependences. The proposed transistor-level design procedure is based on the EKV modeling approach and relies on the device inversion level as a fundament

Remote maintenance systems requirements are being developed to provide design guidelines for machine components, to define maintenance interfaces, and to quantify maintenance equipment and procedures needed

International Nuclear Information System (INIS)

Spampinato, P.T.; Tabor, M.A.

1988-01-01

Remote maintenance systems requirements are being developed to provide design guidelines for machine components, to define maintenance interfaces, and to quantify maintenance equipment and procedures needed

Static and dynamic buckling of large thin shells. (Design procedure, computation tools. Physical understanding of the mechanisms)

International Nuclear Information System (INIS)

Combescure, A.

1986-04-01

During the last ten years, the French Research Institute for Nuclear Energy (Commissariat a l'Energie Atomique) achieved many theoretical as well as experimental studies for designing the first large size pool type fast breeder reactor. Many of the sensitive parts of this reactor are thin shells subjected to high temperatures and loads. Special care has been given to buckling, because it often governs design. Most of the thin shells structures of the french breeder reactor are axisymmetric. However, imperfections have to be accounted for. In order to keep the advantage of an axisymmetric analysis (low computational costs), a special element has been implemented and used with considerable success in the recent years. This element (COMU) is described in the first chapter, its main features are: either non axisymmetric imperfection or non axisymmetric load, large displacement, non linear material behaviour, computational costs about ten times cheaper than the equivalent three dimensional analysis. This paper based on a careful comparison between experimental and computational results, obtained with the COMU, will analyse three problems: First: design procedure against buckling of thin shells structures subjected to primary loads; Second: static post buckling; Third: buckling under seismic loads [fr

A review of mammalian carcinogenicity study design and potential effects of alternate test procedures on the safety evaluation of food ingredients.

Science.gov (United States)

Hayes, A W; Dayan, A D; Hall, W C; Kodell, R L; Williams, G M; Waddell, W D; Slesinski, R S; Kruger, C L

2011-06-01

Extensive experience in conducting long term cancer bioassays has been gained over the past 50 years of animal testing on drugs, pesticides, industrial chemicals, food additives and consumer products. Testing protocols for the conduct of carcinogenicity studies in rodents have been developed in Guidelines promulgated by regulatory agencies, including the US EPA (Environmental Protection Agency), the US FDA (Food and Drug Administration), the OECD (Organization for Economic Co-operation and Development) for the EU member states and the MAFF (Ministries of Agriculture, Forestries and Fisheries) and MHW (Ministry of Health and Welfare) in Japan. The basis of critical elements of the study design that lead to an accepted identification of the carcinogenic hazard of substances in food and beverages is the focus of this review. The approaches used by entities well-known for carcinogenicity testing and/or guideline development are discussed. Particular focus is placed on comparison of testing programs used by the US National Toxicology Program (NTP) and advocated in OECD guidelines to the testing programs of the European Ramazzini Foundation (ERF), an organization with numerous published carcinogenicity studies. This focus allows for a good comparison of differences in approaches to carcinogenicity testing and allows for a critical consideration of elements important to appropriate carcinogenicity study designs and practices. OECD protocols serve as good standard models for carcinogenicity testing protocol design. Additionally, the detailed design of any protocol should include attention to the rationale for inclusion of particular elements, including the impact of those elements on study interpretations. Appropriate interpretation of study results is dependent on rigorous evaluation of the study design and conduct, including differences from standard practices. Important considerations are differences in the strain of animal used, diet and housing practices, rigorousness

34 CFR 370.43 - What requirement applies to the use of mediation procedures?

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What requirement applies to the use of mediation... applies to the use of mediation procedures? (a) Each designated agency shall implement procedures designed to ensure that, to the maximum extent possible, good faith negotiations and mediation procedures are...

Study on computerized presentation of emergency procedures of a nuclear plant (step 2). The guidelines of the prototype of the computerized procedure presentation system

International Nuclear Information System (INIS)

Niwa, Yuji; Hollnagel, E.; Iwaki, Toshio.

1995-01-01

New methods of information presentation and interface design are changing the working conditions in the modern Nuclear Power Plant (NPP) control room. One area receiving considerable attention is that of Emergency Operating Procedures (EOPs), which plays an essential role in NPPs. Conventionally procedures are presented in a hard copy form. However developments in information technology have offered new opportunities for the computerization of such procedures. Consideration for the first stage of computerization should be focused upon the presentation of procedures. The specification of the computerized presentation of procedures is discussed with respect to the issues which were central to the project: navigation through procedures; formatting and presentation of procedures; and process monitoring. Issues that would be included in more advanced systems, such as help and explanation facilities features, and process linking, are also discussed. This paper deals with the specific design guidelines that were implemented for the computerization of procedure presentation. Issues of principal concern that were identified from this experience are highlighted, such as the relationship between procedure presentation and format; the registration of progress through a procedure; compensation for the limitations of computer displays versus printed documents; and the way in which the added capabilities of computerized presentation can be generally utilized in the operators' working environment. (author)

Procedures and practices for abnormal occurrences and emergencies

International Nuclear Information System (INIS)

Blaesig, H.

1986-01-01

This lecture contains the concept of the Emergency Operating Procedures (EOPs) of German power plants. As the procedures depend on the technique of the plant the level of automation and the types of information are described first. After this, the method to diagnose a transient or accident, following entry into an emergency procedure is explained. An overview about the design basis accidents and the aim of the actions in the procedures is given basing on the existing rules and regulations. Finally the theoretical principles are explained taking the corresponding procedures and examples of two German PWRs. (orig.)

Recent advances in design procedures for high temperature plant

International Nuclear Information System (INIS)

1988-01-01

Thirteen papers cover several aspects of design for high temperature plant. These include design codes, computerized structural analysis and mechanical properties of materials at high temperatures. Seven papers are relevant for fast reactors and these are indexed separately. These cover shakedown design, design codes for thin shells subjected to cyclic thermal loading, the inelastic behaviour of stainless steels and creep and crack propagation in reactor structures under stresses caused by thermal cycling loading. (author)

TU-FG-201-12: Designing a Risk-Based Quality Assurance Program for a Newly Implemented Y-90 Microspheres Procedure

Energy Technology Data Exchange (ETDEWEB)

Vile, D; Zhang, L; Cuttino, L; Kim, S; Palta, J [Virginia Commonwealth University, Richmond, VA (United States)

2016-06-15

Purpose: To create a quality assurance program based upon a risk-based assessment of a newly implemented SirSpheres Y-90 procedure. Methods: A process map was created for a newly implemented SirSpheres procedure at a community hospital. The process map documented each step of this collaborative procedure, as well as the roles and responsibilities of each member. From the process map, different potential failure modes were determined as well as any current controls in place. From this list, a full failure mode and effects analysis (FMEA) was performed by grading each failure mode’s likelihood of occurrence, likelihood of detection, and potential severity. These numbers were then multiplied to compute the risk priority number (RPN) for each potential failure mode. Failure modes were then ranked based on their RPN. Additional controls were then added, with failure modes corresponding to the highest RPNs taking priority. Results: A process map was created that succinctly outlined each step in the SirSpheres procedure in its current implementation. From this, 72 potential failure modes were identified and ranked according to their associated RPN. Quality assurance controls and safety barriers were then added for failure modes associated with the highest risk being addressed first. Conclusion: A quality assurance program was created from a risk-based assessment of the SirSpheres process. Process mapping and FMEA were effective in identifying potential high-risk failure modes for this new procedure, which were prioritized for new quality assurance controls. TG 100 recommends the fault tree analysis methodology to design a comprehensive and effective QC/QM program, yet we found that by simply introducing additional safety barriers to address high RPN failure modes makes the whole process simpler and safer.

TU-FG-201-12: Designing a Risk-Based Quality Assurance Program for a Newly Implemented Y-90 Microspheres Procedure

International Nuclear Information System (INIS)

Vile, D; Zhang, L; Cuttino, L; Kim, S; Palta, J

2016-01-01

Purpose: To create a quality assurance program based upon a risk-based assessment of a newly implemented SirSpheres Y-90 procedure. Methods: A process map was created for a newly implemented SirSpheres procedure at a community hospital. The process map documented each step of this collaborative procedure, as well as the roles and responsibilities of each member. From the process map, different potential failure modes were determined as well as any current controls in place. From this list, a full failure mode and effects analysis (FMEA) was performed by grading each failure mode’s likelihood of occurrence, likelihood of detection, and potential severity. These numbers were then multiplied to compute the risk priority number (RPN) for each potential failure mode. Failure modes were then ranked based on their RPN. Additional controls were then added, with failure modes corresponding to the highest RPNs taking priority. Results: A process map was created that succinctly outlined each step in the SirSpheres procedure in its current implementation. From this, 72 potential failure modes were identified and ranked according to their associated RPN. Quality assurance controls and safety barriers were then added for failure modes associated with the highest risk being addressed first. Conclusion: A quality assurance program was created from a risk-based assessment of the SirSpheres process. Process mapping and FMEA were effective in identifying potential high-risk failure modes for this new procedure, which were prioritized for new quality assurance controls. TG 100 recommends the fault tree analysis methodology to design a comprehensive and effective QC/QM program, yet we found that by simply introducing additional safety barriers to address high RPN failure modes makes the whole process simpler and safer.

A Tuning Procedure for ARX-based MPC of Multivariate Processes

DEFF Research Database (Denmark)

Olesen, Daniel; Huusom, Jakob Kjøbsted; Jørgensen, John Bagterp

2013-01-01

We present an optimization based tuning procedure with certain robustness properties for an offset free Model Predictive Controller (MPC). The MPC is designed for multivariate processes that can be represented by an ARX model. The stochastic model of the ARX model identified from input-output data...... is modified with an ARMA model designed as part of the MPC-design procedure to ensure offset-free control. The MPC is designed and implemented based on a state space model in innovation form. Expressions for the closed-loop dynamics of the unconstrained system is used to derive the sensitivity function...... to a constraint on the maximum of the sensitivity function. The latter constraint provides a robustness measure that is essential for the procedure. The method is demonstrated for two simulated examples: A Wood-Berry distillation column example and a cement mill example....

46 CFR 154.180 - Contiguous hull structure: Welding procedure.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Contiguous hull structure: Welding procedure. 154.180... Equipment Hull Structure § 154.180 Contiguous hull structure: Welding procedure. Welding procedure tests for contiguous hull structure designed for a temperature colder than −18 °C (0 °F) must meet § 54.05-15 and...

42 CFR 405.512 - Carriers' procedural terminology and coding systems.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Carriers' procedural terminology and coding systems... Determining Reasonable Charges § 405.512 Carriers' procedural terminology and coding systems. (a) General. Procedural terminology and coding systems are designed to provide physicians and third party payers with a...

48 CFR 570.105-2 - Two-phase design-build selection procedures.

Science.gov (United States)

2010-10-01

... lease construction projects with options to purchase the real property leased. Use the procedures in.... (iii) The capability and experience of potential contractors. (iv) The suitability of the project for...

Experiments with Cloze Procedure

Science.gov (United States)

Evans, Gordon; Haastrup, Kirsten

1976-01-01

The Nordic Test Development Group prepared proficiency tests of English designed to provide reliable information on which to base decisions as to whether a candidate would be able to function in a job as described or whether he could be trained to do so. Two subtests used a modified cloze procedure. (Author/CFM)

Procedural violation in the licensing procedure and possible legal consequences; Verfahrensmaengel im Konzessionierungsverfahren und etwaige Rechtsfolgen

Energy Technology Data Exchange (ETDEWEB)

Meyer-Hetling, Astrid; Probst, Matthias Ernst; Wolkenhauer, Soeren [Kanzlei Becker Buettner Held (BBH), Berlin (Germany)

2012-07-15

With respect to paragraph 46 sect. 2 to 4 EnWG (Energy Economy Law) communities are required to provide a publication procedure and competition procedure ('licensing procedure') for the new assignment of easement agreements for the establishment of local power supply systems and natural gas supply systems. The specific design of the selection process legally is regulated only rudimentary. Nevertheless old concessionaires increasingly deny the statutory grid transfer to the new concessionaires relying on supposed errors in the selection process. The unclear legal situation and the inconsistent, sometimes unreasonably strict jurisdiction and jurisprudence of antitrust as well as regulatory authorities resulted to a considerable legal certainty in communities and grid operators. Unless the legislature establishes the necessary legal clarity, the competent courts and authorities are invoked to act moderately in the examination of licensing procedures.

Metodika RUP a testování

OpenAIRE

Randová, Libuše

2008-01-01

Bakalářská práce se zabývá testováním z pohledu metodiky Rational Unified Process. Cílem práce je seznámit čtenáře s vývojem softwaru podle metodiky RUP a s úlohou, kterou v tomto procesu hraje testování. V úvodní části teoretické části je poskytnut pohled na historii metodiky RUP a popis šesti klíčových principů, které v nedávné době nahradily předchozích šest nejlepších praktik. Další kapitola je věnována popisu jednotlivých fází vývoje softwaru. V této části jsou rovněž zmíněny další disci...

Interneto paslaugų audito metodika ir prototipas

OpenAIRE

Žylė, Tomas

2011-01-01

Web services for quality assurance and improvement is necessary for web service audit methodology. This methodology would allow to assess and monitor the quality of web services. In this way, service providers know what they need to do in order to improve web services quality. Currently, information systems and technologies are used in the evaluation of complex assessment methods, such as COBIT, ITIL, CMMI, etc..These methods assess inside the organization's available information systems, ...

Automated procedure execution for space vehicle autonomous control

Science.gov (United States)

Broten, Thomas A.; Brown, David A.

1990-01-01

Increased operational autonomy and reduced operating costs have become critical design objectives in next-generation NASA and DoD space programs. The objective is to develop a semi-automated system for intelligent spacecraft operations support. The Spacecraft Operations and Anomaly Resolution System (SOARS) is presented as a standardized, model-based architecture for performing High-Level Tasking, Status Monitoring and automated Procedure Execution Control for a variety of spacecraft. The particular focus is on the Procedure Execution Control module. A hierarchical procedure network is proposed as the fundamental means for specifying and representing arbitrary operational procedures. A separate procedure interpreter controls automatic execution of the procedure, taking into account the current status of the spacecraft as maintained in an object-oriented spacecraft model.

Procedure for Validation of Aggregators Providing Demand Response

DEFF Research Database (Denmark)

Bondy, Daniel Esteban Morales; Gehrke, Oliver; Thavlov, Anders

2016-01-01

of small heterogeneous resources that are geographically distributed. Therefore, a new test procedure must be designed for the aggregator validation. This work proposes such a procedure and exemplifies is with a study case. The validation of aggregators is essential if aggregators are to be integrated...... succesfully into the power system....

Small Optics Laser Damage Test Procedure

Energy Technology Data Exchange (ETDEWEB)

Wolfe, Justin [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-19

This specification defines the requirements and procedure for laser damage testing of coatings and bare surfaces designated for small optics in the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL).

New ion exchange resin designs and regeneration procedures yield improved performance for various condensate polishing applications

International Nuclear Information System (INIS)

Najmy, S.W.

2002-01-01

Condensate polishing is an application with many different design and operational aspects. The past decade has brought new challenges for improved water quality with respect to both soluble and insoluble contaminants. Nonetheless, the endeavors to understand the compositional complexities of the ion exchange resin bead and the convoluted dynamics of ion exchange chemistry and chemical engineering mechanisms occurring within the mixed bed condensate polisher have brought new ideas and expectations for ion exchange resin in deep-bed condensate polishers than ever before. The new products and procedures presented here are a collaboration of a great deal of effort on the part of researchers, consultants, system engineers, station chemists, lab technicians and others. The studies discussed in this paper unequivocally demonstrate the merits of: 1. A specially designed cation resin to achieve greater than 95% insoluble iron removal efficiency, 2. A less-separable mixed resin for improved control of reactor water sulfate in BWR primary cycles, 3. Applying increased levels of regeneration chemicals and retrofitting the service vessels with re-mixing capability to improve the operation of deep-bed condensate polishers in PWR secondary cycles. (authors)

A robust anti-windup design procedure for SISO systems

Science.gov (United States)

Kerr, Murray; Turner, Matthew C.; Villota, Elizabeth; Jayasuriya, Suhada; Postlethwaite, Ian

2011-02-01

A model-based anti-windup (AW) controller design approach for constrained uncertain linear single-input-single-output (SISO) systems is proposed based on quantitative feedback theory (QFT) loopshaping. The design approach explicitly incorporates uncertainty, is suitable for the solution of both the magnitude and rate saturation problems, and provides for the design of low-order AW controllers satisfying robust stability and robust performance objectives. Robust stability is enforced using absolute stability theory and generic multipliers (i.e. circle, Popov, Zames-Falb), and robust performance is enforced using linear lower-bounds on the input-output maps capturing the effects of saturation as a metric. Two detailed design examples are presented. These show that even for simple systems, certain popular AW techniques lead to compensators that may fail to ensure robust stability and performance when saturation is encountered, but that the proposed QFT design approach is able to handle both saturation and uncertainty effectively.

Optimization of instrumental neutron activation analysis method by means of 2k experimental design technique aiming the validation of analytical procedures

International Nuclear Information System (INIS)

Petroni, Robson; Moreira, Edson G.

2013-01-01

In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) methods were carried out for the determination of the elements arsenic, chromium, cobalt, iron, rubidium, scandium, selenium and zinc in biological materials. The aim is to validate the analytical methods for future accreditation at the National Institute of Metrology, Quality and Technology (INMETRO). The 2 k experimental design was applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. Samples of Mussel Tissue Certified Reference Material and multi-element standards were analyzed considering the following variables: sample decay time, counting time and sample distance to detector. The standard multi-element concentration (comparator standard), mass of the sample and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN - CNEN/SP). Optimized conditions were estimated based on the results of z-score tests, main effect and interaction effects. The results obtained with the different experimental configurations were evaluated for accuracy (precision and trueness) for each measurement. (author)

17 CFR 38.3 - Procedures for designation.

Science.gov (United States)

2010-04-01

... application for designation with the Secretary of the Commission at its Washington, DC, headquarters. Except... partnership or limited liability company, third-party regulatory service, or member or user agreements, that... filing such a request with the Commission at its Washington, DC, headquarters. Withdrawal of an...

The effects of cognitive reappraisal following retrieval-procedures designed to destabilize alcohol memories in high-risk drinkers.

Science.gov (United States)

Hon, Tiffany; Das, Ravi K; Kamboj, Sunjeev K

2016-03-01

Addiction is a disorder of motivational learning and memory. Maladaptive motivational memories linking drug-associated stimuli to drug seeking are formed over hundreds of reinforcement trials and accompanied by aberrant neuroadaptation in the mesocorticolimbic reward system. Such memories are resistant to extinction. However, the discovery of retrieval-dependent memory plasticity has opened up the possibility of permanent modification of established (long-term) memories during 'reconsolidation'. Here, we investigate whether reappraisal of maladaptive alcohol cognitions performed after procedures designed to destabilize alcohol memory networks affected subsequent alcohol memory, craving, drinking and attentional bias. Forty-seven at-risk drinkers attended two sessions. On the first lab session, participants underwent one of two prediction error-generating procedures in which outcome expectancies were violated while retrieving alcohol memories (omission and value prediction error groups). Participants in a control group retrieved non-alcohol memories. Participants then reappraised personally relevant maladaptive alcohol memories and completed measures of reappraisal recall, alcohol verbal fluency and craving. Seven days later, they repeated these measures along with attentional bias assessment. Omission prediction error (being unexpectedly prevented from drinking beer), but not a value prediction error (drinking unexpectedly bitter-tasting beer) or control procedure (drinking unexpectedly bitter orange juice), was associated with significant reductions in verbal fluency for positive alcohol-related words. No other statistically robust outcomes were detected. This study provides partial preliminary support for the idea that a common psychotherapeutic strategy used in the context of putative memory retrieval-destabilization can alter accessibility of alcohol semantic networks. Further research delineating the necessary and sufficient requirements for producing

New graft sizing rings for aortic valve reimplantation procedures.

Science.gov (United States)

Jelenc, Matija; Jelenc, Blaž; Kneževic, Ivan; Klokocovnik, Tomislav

2018-01-01

The objective was to design sizing rings that would enable proper sizing of the graft in reimplantation procedures and to perform leaflet repair before graft implantation. The rings were designed in Autodesk Fusion 360 (San Rafael, CA, USA) and 3D printed using a commercial online 3D printing service. We designed incomplete rings with a low profile and complete rings with a high profile. The complete rings are best suited for reimplantation procedures, whereas low profile C rings are intended for isolated aortic valve repair, where the ascending aorta is not transected. The rings come in sizes corresponding to Vascutek Gelweave graft sizes (Vascutek Terumo, Renfrewshire, Scotland). The ring internal diameters are 5% larger than the designated ring sizes and account for the 5% stretch of the grafts when pressurized. Blades of the rings are placed at 20° intervals. The slits between the blades are designed in such a way that the commissural U-sutures, when put in place and under tension, will lock the ring in position. The rings were successfully used in 10 of our latest reimplantation procedures. After dissection of the aortic root, the commissures were suspended with U-stitches and then the ring was seated onto them. Complete leaflet repair with plication to achieve adequate effective height was then performed, followed by graft implantation. No additional leaflet repair was needed. The newly designed sizing rings enable proper sizing of the graft in reimplantation procedures and enable complete leaflet repair before graft implantation. © The Author 2017. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

42 CFR 405.1834 - CMS reviewing official procedure.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false CMS reviewing official procedure. 405.1834 Section... Determinations and Appeals § 405.1834 CMS reviewing official procedure. (a) Scope. A provider that is a party to... Administrator by a designated CMS reviewing official who considers whether the decision of the intermediary...

40 CFR 53.65 - Test procedure: Loading test.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Test procedure: Loading test. 53.65... Characteristics of Class II Equivalent Methods for PM2.5 § 53.65 Test procedure: Loading test. (a) Overview. (1) The loading tests are designed to quantify any appreciable changes in a candidate method sampler's...

Tight integration of computerized procedures with plant information at the South Texas Project

International Nuclear Information System (INIS)

Brtis, J.S.; Green, T.

1996-01-01

This paper describes a unique undertaking that is underway at Houston Lighting and Power's South Texas Project (STP). The paper presents an information upgrade project that uses expert system technologies to computerize design change procedures and to tightly integrate the resulting on-line, interactive procedures with the on-line information that design change activities use and generate. This effort will show how procedure computerization can leverage the large investments in plant data. The expected benefits include reduced costs and improved quality of design change work, plus a significant reduction in the burden of configuration management that comes from design changes. Both process computerization and the integration of process with data are being implemented at STP. This work is part of a major migration of information from a mainframe to a LAN platform. This paper will be of greatest interest to those involved in: (1) configuration management, (2) coordinating information to support design change procedures, (3) plant information management, and (4) business process reengineering

Development of a 3-dimensional flow analysis procedure for axial pump impellers

International Nuclear Information System (INIS)

Kim, Min Hwan; Kim, Jong In; Park, Jin Seok; Huh, Houng Huh; Chang, Moon Hee

1999-06-01

A fluid dynamic analysis procedure was developed using the three-dimensional solid model of an axial pump impeller which was theoretically designed using I-DEAS CAD/CAM/CAE software. The CFD software FLUENT was used in the flow field analysis. The steady-state flow regime in the MCP impeller and diffuser was simulated using the developed procedure. The results of calculation were analyzed to confirm whether the design requirements were properly implemented in the impeller model. The validity of the developed procedure was demonstrated by comparing the calculation results with the experimental data available. The pump performance at the design point could be effectively predicted using the developed procedure. The computed velocity distributions have shown a good agreement with the experimental data except for the regions near the wall. The computed head, however, was over-predicted than the experiment. The design period and cost required for the development of an axial pump impeller can be significantly reduced by applying the proposed methodology. (author). 7 refs., 2 tabs

Design and fabrication procedures of Super-Phenix fuel elements

International Nuclear Information System (INIS)

Leclere, J.; Vialard, J.-L.; Delpeyroux, P.

1975-01-01

For Super-Phenix fuel assemblies, Phenix technological arrangements will be used again, but they will be simplified as far as possible. The maximum fuel can temperature has been lowered in order to obtain a good behavior of hexagonal tubes and cans at high irradiation levels. An important experimental programme and the experience gained from Phenix operation will confirm the merits of the options retained. The fuel element fabrication is envisaged to take place in the plutonium workshop at Cadarache. Usual procedures will be employed and both reliability and automation will be increased [fr

Core calculational techniques and procedures

International Nuclear Information System (INIS)

Romano, J.J.

1977-10-01

Described are the procedures and techniques employed by B and W in core design analyses of power peaking, control rod worths, and reactivity coefficients. Major emphasis has been placed on current calculational tools and the most frequently performed calculations over the operating power range

CMOS gate array characterization procedures

Science.gov (United States)

Spratt, James P.

1993-09-01

Present procedures are inadequate for characterizing the radiation hardness of gate array product lines prior to personalization because the selection of circuits to be used, from among all those available in the manufacturer's circuit library, is usually uncontrolled. (Some circuits are fundamentally more radiation resistant than others.) In such cases, differences in hardness can result between different designs of the same logic function. Hardness also varies because many gate arrays feature large custom-designed megacells (e.g., microprocessors and random access memories-MicroP's and RAM's). As a result, different product lines cannot be compared equally. A characterization strategy is needed, along with standardized test vehicle(s), methodology, and conditions, so that users can make informed judgments on which gate arrays are best suited for their needs. The program described developed preferred procedures for the radiation characterization of gate arrays, including a gate array evaluation test vehicle, featuring a canary circuit, designed to define the speed versus hardness envelope of the gate array. A multiplier was chosen for this role, and a baseline multiplier architecture is suggested that could be incorporated into an existing standard evaluation circuit chip.

40 CFR 53.66 - Test procedure: Volatility test.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Test procedure: Volatility test. 53.66... Characteristics of Class II Equivalent Methods for PM2.5 § 53.66 Test procedure: Volatility test. (a) Overview. This test is designed to ensure that the candidate method's losses due to volatility when sampling semi...

46 CFR 184.702 - Pollution prevention equipment and procedures.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Pollution prevention equipment and procedures. 184.702 Section 184.702 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS... Pollution prevention equipment and procedures. A vessel must comply with the applicable design, equipment...

Mixture-based gatekeeping procedures in adaptive clinical trials.

Science.gov (United States)

Kordzakhia, George; Dmitrienko, Alex; Ishida, Eiji

2018-01-01

Clinical trials with data-driven decision rules often pursue multiple clinical objectives such as the evaluation of several endpoints or several doses of an experimental treatment. These complex analysis strategies give rise to "multivariate" multiplicity problems with several components or sources of multiplicity. A general framework for defining gatekeeping procedures in clinical trials with adaptive multistage designs is proposed in this paper. The mixture method is applied to build a gatekeeping procedure at each stage and inferences at each decision point (interim or final analysis) are performed using the combination function approach. An advantage of utilizing the mixture method is that it enables powerful gatekeeping procedures applicable to a broad class of settings with complex logical relationships among the hypotheses of interest. Further, the combination function approach supports flexible data-driven decisions such as a decision to increase the sample size or remove a treatment arm. The paper concludes with a clinical trial example that illustrates the methodology by applying it to develop an adaptive two-stage design with a mixture-based gatekeeping procedure.

Interventional chest procedures in pregnancy.

LENUS (Irish Health Repository)

Morgan, Ross K

2011-03-01

Interventional pulmonology encompasses diagnostic and therapeutic bronchoscopic procedures, and pleural interventions. In the last 10 years older techniques have been refined and exciting new technologies have extended the reach and application of the instruments used. The main areas within pulmonary medicine for which these interventions have a role are malignant and nonmalignant airway disease, pleural effusion, pneumothorax, and artificial airways. There are no data from well-designed prospective trials to guide recommendations for interventional pulmonary procedures in pregnancy. The recommendations provided in this article are based on critical review of reported case series, opinion from recognized experts, and personal observations.

Interventional chest procedures in pregnancy.

LENUS (Irish Health Repository)

Morgan, Ross K

2012-02-01

Interventional pulmonology encompasses diagnostic and therapeutic bronchoscopic procedures, and pleural interventions. In the last 10 years older techniques have been refined and exciting new technologies have extended the reach and application of the instruments used. The main areas within pulmonary medicine for which these interventions have a role are malignant and nonmalignant airway disease, pleural effusion, pneumothorax, and artificial airways. There are no data from well-designed prospective trials to guide recommendations for interventional pulmonary procedures in pregnancy. The recommendations provided in this article are based on critical review of reported case series, opinion from recognized experts, and personal observations.

Breakwater design

NARCIS (Netherlands)

Verhagen, H.J.; van den Bos, J.P.

For this book we have deliberately chosen that the text should follow a more or less logical design procedure for breakwaters. It follows the required design steps from the system level down to the individual crosssection level, and in time from conceptual design to construction. This systematic

Kto samõi bogatõi v Estonii / Sten-Aleks Pihlak, Kärt Blumberg, Lemmi Kann

Index Scriptorium Estoniae

Pihlak, Sten-Aleks

2008-01-01

Eesti laevatranspordi kolmik - Ain Hanschmidt, Enn Pant ja Kalev Järvelill on Äripäeva rikaste edetabelis esimesed. Viimaste kuude suure aktsiahinnalanguse tõttu on paljud Äripäeva rikaste edetabelis olijad kaotanud igast kolmest kroonist kaks. Artiklis selgitatakse miks on Äripäeva Rikaste TOPis vähe naisi. Lisad: Iz TOP-500 samõhh bogatõhh ljudei v Estonii; Reitingi bogatshei za prezhnije godõ; Metodika

An integrated computer-based procedure for teamwork in digital nuclear power plants.

Science.gov (United States)

Gao, Qin; Yu, Wenzhu; Jiang, Xiang; Song, Fei; Pan, Jiajie; Li, Zhizhong

2015-01-01

Computer-based procedures (CBPs) are expected to improve operator performance in nuclear power plants (NPPs), but they may reduce the openness of interaction between team members and harm teamwork consequently. To support teamwork in the main control room of an NPP, this study proposed a team-level integrated CBP that presents team members' operation status and execution histories to one another. Through a laboratory experiment, we compared the new integrated design and the existing individual CBP design. Sixty participants, randomly divided into twenty teams of three people each, were assigned to the two conditions to perform simulated emergency operating procedures. The results showed that compared with the existing CBP design, the integrated CBP reduced the effort of team communication and improved team transparency. The results suggest that this novel design is effective to optim team process, but its impact on the behavioural outcomes may be moderated by more factors, such as task duration. The study proposed and evaluated a team-level integrated computer-based procedure, which present team members' operation status and execution history to one another. The experimental results show that compared with the traditional procedure design, the integrated design reduces the effort of team communication and improves team transparency.

48 CFR 17.403 - Procedures.

Science.gov (United States)

2010-10-01

... CONTRACT TYPES SPECIAL CONTRACTING METHODS Leader Company Contracting 17.403 Procedures. (a) The contracting officer may award a prime contract to a— (1) Leader company, obligating it to subcontract a designated portion of the required end items to a specified follower company and to assist it to produce the...

DPL/Daedalus design environment (for VLSI)

Energy Technology Data Exchange (ETDEWEB)

Batali, J; Mayle, N; Shrobe, H; Sussman, G; Weise, D

1981-01-01

The DPL/Daedalus design environment is an interactive VLSI design system implemented at the MIT Artificial Intelligence Laboratory. The system consists of several components: a layout language called DPL (for design procedure language); an interactive graphics facility (Daedalus); and several special purpose design procedures for constructing complex artifacts such as PLAs and microprocessor data paths. Coordinating all of these is a generalized property list data base which contains both the data representing circuits and the procedures for constructing them. The authors first review the nature of the data base and then turn to DPL and Daedalus, the two most common ways of entering information into the data base. The next two sections review the specialized procedures for constructing PLAs and data paths; the final section describes a tool for hierarchical node extraction. 5 references.

Coordinating resources for prospective medication risk management of older home care clients in primary care: procedure development and RCT study design for demonstrating its effectiveness.

Science.gov (United States)

Toivo, Terhi; Dimitrow, Maarit; Puustinen, Juha; Savela, Eeva; Pelkonen, Katariina; Kiuru, Valtteri; Suominen, Tuula; Kinnunen, Sirkka; Uunimäki, Mira; Kivelä, Sirkka-Liisa; Leikola, Saija; Airaksinen, Marja

2018-03-16

The magnitude of safety risks related to medications of the older adults has been evidenced by numerous studies, but less is known of how to manage and prevent these risks in different health care settings. The aim of this study was to coordinate resources for prospective medication risk management of home care clients ≥ 65 years in primary care and to develop a study design for demonstrating effectiveness of the procedure. Health care units involved in the study are from primary care in Lohja, Southern Finland: home care (191 consented clients), the public healthcare center, and a private community pharmacy. System based risk management theory and action research method was applied to construct the collaborative procedure utilizing each profession's existing resources in medication risk management of older home care clients. An inventory of clinical measures in usual clinical practice and systematic review of rigorous study designs was utilized in effectiveness study design. The new coordinated medication management model (CoMM) has the following 5 stages: 1) practical nurses are trained to identify clinically significant drug-related problems (DRPs) during home visits and report those to the clinical pharmacist. Clinical pharmacist prepares the cases for 2) an interprofessional triage meeting (50-70 cases/meeting of 2 h) where decisions are made on further action, e.g., more detailed medication reviews, 3) community pharmacists conduct necessary medication reviews and each patients' physician makes final decisions on medication changes needed. The final stages concern 4) implementation and 5) follow-up of medication changes. Randomized controlled trial (RCT) was developed to demonstrate the effectiveness of the procedure. The developed procedure is feasible for screening and reviewing medications of a high number of older home care clients to identify clients with severe DRPs and provide interventions to solve them utilizing existing primary care resources

Design of standard operating procedure production proceses (case study on the home industry Bedugul Baturiti Tabanan Bali)

Science.gov (United States)

Kasiani; Suhantono, Djoko; Mirah Kencanawati, AAA

2018-01-01

Candikuning is part of the district of Baturiti, tourism village, better known by the name of Bedugul. No less interesting is the variety of chips produced by two partner groups as a souvenir after the tour, such as Chips: Spinach; beans; Tempeh. The purpose of this research were to design a Standard Operating Procedure (SOP): Production Processes on the Home Industry Bedugul Baturiti Tabanan Bali. The data technic collected use: observation; Documentation; and then interview to collect information. The data analysis technic done by using the Miles & Huberman. Result this research that the draft SOP: Production Processes Chips (Menu). The conclusion in this research SOP Production Processes use with flowchart and description on the Home Industry Bedugul Baturiti Tabanan Bali.

Diagnostical Procedure for Logistical Management in Turistical Entities

Directory of Open Access Journals (Sweden)

Libia Arlen Fergusson-Álvarez

2016-06-01

Full Text Available This research aims to design a diagnostic procedure of the logistics management for turistical entities, they could be hotels or not. This procedure was validated in Commercial Branch Caracol Santiago de Cuba and finally, different actions for the detected problems were proposed with the objective of improving the logistics management of the organization. To develop this research various tools and techniques served as support, such as: surveys, SPSS software (Statistical Package for Social Sciences 15.0 version and Decision 1.0 version, exponential smoothing, Cronbach's Alpha, the coefficient of Kendall W, financial and logistical indicators, the ABC or Pareto Method, the matrices for the classification of stocks and suppliers, among others. This research made possible the design of a diagnostic procedure for logistical management for turistical entities. And it was validated in the Comercial Branch Caracol Santiago, which allowed the proposition of improvement actions for increasing customer satisfaction.

Biaxial testing for fabrics and foils optimizing devices and procedures

CERN Document Server

Beccarelli, Paolo

2015-01-01

This book offers a well-structured, critical review of current design practice for tensioned membrane structures, including a detailed analysis of the experimental data required and critical issues relating to the lack of a set of design codes and testing procedures. The technical requirements for biaxial testing equipment are analyzed in detail, and aspects that need to be considered when developing biaxial testing procedures are emphasized. The analysis is supported by the results of a round-robin exercise comparing biaxial testing machines that involved four of the main research laboratories in the field. The biaxial testing devices and procedures presently used in Europe are extensively discussed, and information is provided on the design and implementation of a biaxial testing rig for architectural fabrics at Politecnico di Milano, which represents a benchmark in the field. The significance of the most recent developments in biaxial testing is also explored.

Core design methods for advanced LMFBRs

International Nuclear Information System (INIS)

Chandler, J.C.; Marr, D.R.; McCurry, D.C.; Cantley, D.A.

1977-05-01

The multidiscipline approach to advanced LMFBR core design requires an iterative design procedure to obtain a closely-coupled design. HEDL's philosophy requires that the designs should be coupled to the extent that the design limiting fuel pin, the design limiting duct and the core reactivity lifetime should all be equal and should equal the fuel residence time. The design procedure consists of an iterative loop involving three stages of the design sequence. Stage 1 consists of general mechanical design and reactor physics scoping calculations to arrive at an initial core layout. Stage 2 consists of detailed reactor physics calculations for the core configuration arrived at in Stage 1. Based upon the detailed reactor physics results, a decision is made either to alter the design (Stage 1) or go to Stage 3. Stage 3 consists of core orificing and detailed component mechanical design calculations. At this point, an assessment is made regarding design adequacy. If the design is inadequate the entire procedure is repeated until the design is acceptable

Function Allocation in Complex Socio-Technical Systems: Procedure usage in nuclear power and the Context Analysis Method for Identifying Design Solutions (CAMIDS) Model

Science.gov (United States)

Schmitt, Kara Anne

This research aims to prove that strict adherence to procedures and rigid compliance to process in the US Nuclear Industry may not prevent incidents or increase safety. According to the Institute of Nuclear Power Operations, the nuclear power industry has seen a recent rise in events, and this research claims that a contributing factor to this rise is organizational, cultural, and based on peoples overreliance on procedures and policy. Understanding the proper balance of function allocation, automation and human decision-making is imperative to creating a nuclear power plant that is safe, efficient, and reliable. This research claims that new generations of operators are less engaged and thinking because they have been instructed to follow procedures to a fault. According to operators, they were once to know the plant and its interrelations, but organizationally more importance is now put on following procedure and policy. Literature reviews were performed, experts were questioned, and a model for context analysis was developed. The Context Analysis Method for Identifying Design Solutions (CAMIDS) Model was created, verified and validated through both peer review and application in real world scenarios in active nuclear power plant simulators. These experiments supported the claim that strict adherence and rigid compliance to procedures may not increase safety by studying the industry's propensity for following incorrect procedures, and when it directly affects the outcome of safety or security of the plant. The findings of this research indicate that the younger generations of operators rely highly on procedures, and the organizational pressures of required compliance to procedures may lead to incidents within the plant because operators feel pressured into following the rules and policy above performing the correct actions in a timely manner. The findings support computer based procedures, efficient alarm systems, and skill of the craft matrices. The solution to

Optimization of instrumental neutron activation analysis method by means of 2{sup k} experimental design technique aiming the validation of analytical procedures

Energy Technology Data Exchange (ETDEWEB)

Petroni, Robson; Moreira, Edson G., E-mail: rpetroni@ipen.br, E-mail: emoreira@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2013-07-01

In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) methods were carried out for the determination of the elements arsenic, chromium, cobalt, iron, rubidium, scandium, selenium and zinc in biological materials. The aim is to validate the analytical methods for future accreditation at the National Institute of Metrology, Quality and Technology (INMETRO). The 2{sup k} experimental design was applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. Samples of Mussel Tissue Certified Reference Material and multi-element standards were analyzed considering the following variables: sample decay time, counting time and sample distance to detector. The standard multi-element concentration (comparator standard), mass of the sample and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN - CNEN/SP). Optimized conditions were estimated based on the results of z-score tests, main effect and interaction effects. The results obtained with the different experimental configurations were evaluated for accuracy (precision and trueness) for each measurement. (author)

Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

Energy Technology Data Exchange (ETDEWEB)

O`Hara, J.M.; Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J. [Carlow International Inc., Falls Church, VA (United States)

1994-07-01

Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

International Nuclear Information System (INIS)

O'Hara, J.M.; Brown, W.S.; Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J.

1994-07-01

Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use

Democratic Deliberation Procedures : Theoretical and Practical Issues

Directory of Open Access Journals (Sweden)

Tutui Viorel

2011-01-01

Full Text Available Abstract : In contemporary political philosophy, the focus of the most important controversies is on the deliberative model of democracy. These controversies concern not only the theoretical problem of providing the best justification for a deliberative model of democratic legitimacy, but also the practical problem of designing the best deliberative procedure that will secure the implementation of deliberative democracy. In this paper I will present and analyze some of the most important deliberative designs: deliberative polls, citizens’ juries, consensus conferences and planning cells. I argue that these deliberative events can have a significant impact on the political behavior of a democratic community. However, I explain that all of them have only a limited influence on the policy-making activities in local and central governing structures. This is the reason why I believe we could only supplement and never fully replace the traditional aggregative procedures of democracy (voting and bargaining with a deliberative design.

FDH radiological design review guidelines

International Nuclear Information System (INIS)

Millsap, W.J.

1998-01-01

These guidelines discuss in more detail the radiological design review process used by the Project Hanford Management Contractors as described in HNF-PRO-1622, Radiological Design Review Process. They are intended to supplement the procedure by providing background information on the design review process and providing a ready source of information to design reviewers. The guidelines are not intended to contain all the information in the procedure, but at points, in order to maintain continuity, they contain some of the same information

FDH radiological design review guidelines

Energy Technology Data Exchange (ETDEWEB)

Millsap, W.J.

1998-09-29

These guidelines discuss in more detail the radiological design review process used by the Project Hanford Management Contractors as described in HNF-PRO-1622, Radiological Design Review Process. They are intended to supplement the procedure by providing background information on the design review process and providing a ready source of information to design reviewers. The guidelines are not intended to contain all the information in the procedure, but at points, in order to maintain continuity, they contain some of the same information.

An intelligent design methodology for nuclear power systems

International Nuclear Information System (INIS)

Nassersharif, B.; Martin, R.P.; Portal, M.G.; Gaeta, M.J.

1989-01-01

The goal of this investigation is to research possible methodologies into automating the design of, specifically, nuclear power facilities; however, it is relevant to all thermal power systems. The strategy of this research has been to concentrate on individual areas of the thermal design process, investigate procedures performed, develop methodology to emulate that behavior, and prototype it in the form of a computer program. The design process has been generalized as follows: problem definition, design definition, component selection procedure, optimization and engineering analysis, testing and final design with the problem definition defining constraints that will be applied to the selection procedure as well as design definition. The result of this research is a prototype computer program applying an original procedure for the selection of the best set of real components that would be used in constructing a system with desired performance characteristics. The mathematical model used for the selection procedure is possibility theory

How does the workload and work activities of procedural GPs compare to non-procedural GPs?

Science.gov (United States)

Russell, Deborah J; McGrail, Matthew R

2017-08-01

To investigate patterns of Australian GP procedural activity and associations with: geographical remoteness and population size hours worked in hospitals and in total; and availability for on-call DESIGN AND PARTICIPANTS: National annual panel survey (Medicine in Australia: Balancing Employment and Life) of Australian GPs, 2011-2013. Self-reported geographical work location, hours worked in different settings, and on-call availability per usual week, were analysed against GP procedural activity in anaesthetics, obstetrics, surgery or emergency medicine. Analysis of 9301 survey responses from 4638 individual GPs revealed significantly increased odds of GP procedural activity in anaesthetics, obstetrics or emergency medicine as geographical remoteness increased and community population size decreased, albeit with plateauing of the effect-size from medium-sized (population 5000-15 000) rural communities. After adjusting for confounders, procedural GPs work more hospital and more total hours each week than non-procedural GPs. In 2011 this equated to GPs practising anaesthetics, obstetrics, surgery, and emergency medicine providing 8% (95%CI 0, 16), 13% (95%CI 8, 19), 8% (95%CI 2, 15) and 18% (95%CI 13, 23) more total hours each week, respectively. The extra hours are attributable to longer hours worked in hospital settings, with no reduction in private consultation hours. Procedural GPs also carry a significantly higher burden of on-call. The longer working hours and higher on-call demands experienced by rural and remote procedural GPs demand improved solutions, such as changes to service delivery models, so that long-term procedural GP careers are increasingly attractive to current and aspiring rural GPs. © 2016 National Rural Health Alliance Inc.

Philosophy, policies, and procedures - The three P's of flight-deck operations

Science.gov (United States)

Degani, Asaf; Wiener, Earl L.

1991-01-01

Standard operating procedures are drafted and provided to flightcrews to dictate the manner in which tasks are carried out. Failure to conform to Standard Operating Procedures (SOP) is frequently listed as the cause of violations, incidents, and accidents. However, procedures are often designed piecemeal, rather than being based on a sound philosophy of operations and policies that follow from such a philosophy. A framework of philosophy, policies, and procedures is proposed.

Fusion reactor design studies: standard accounts for cost estimates

International Nuclear Information System (INIS)

Schulte, S.C.; Willke, T.L.; Young, J.R.

1978-05-01

The fusion reactor design studies--standard accounts for cost estimates provides a common format from which to assess the economic character of magnetically confined fusion reactor design concepts. The format will aid designers in the preparation of design concept costs estimates and also provide policymakers with a tool to assist in appraising which design concept may be economically promising. The format sets forth a categorization and accounting procedure to be used when estimating fusion reactor busbar energy cost that can be easily and consistently applied. Reasons for developing the procedure, explanations of the procedure, justifications for assumptions made in the procedure, and the applicability of the procedure are described in this document. Adherence to the format when evaluating prospective fusion reactor design concepts will result in the identification of the more promising design concepts thus enabling the fusion power alternatives with better economic potential to be quickly and efficiently developed

Standardized Procedure Content And Data Structure Based On Human Factors Requirements For Computer-Based Procedures

International Nuclear Information System (INIS)

Bly, Aaron; Oxstrand, Johanna; Le Blanc, Katya L

2015-01-01

Most activities that involve human interaction with systems in a nuclear power plant are guided by procedures. Traditionally, the use of procedures has been a paper-based process that supports safe operation of the nuclear power industry. However, the nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. Advances in digital technology make computer-based procedures (CBPs) a valid option that provides further enhancement of safety by improving human performance related to procedure use. The transition from paper-based procedures (PBPs) to CBPs creates a need for a computer-based procedure system (CBPS). A CBPS needs to have the ability to perform logical operations in order to adjust to the inputs received from either users or real time data from plant status databases. Without the ability for logical operations the procedure is just an electronic copy of the paper-based procedure. In order to provide the CBPS with the information it needs to display the procedure steps to the user, special care is needed in the format used to deliver all data and instructions to create the steps. The procedure should be broken down into basic elements and formatted in a standard method for the CBPS. One way to build the underlying data architecture is to use an Extensible Markup Language (XML) schema, which utilizes basic elements to build each step in the smart procedure. The attributes of each step will determine the type of functionality that the system will generate for that step. The CBPS will provide the context for the step to deliver referential information, request a decision, or accept input from the user. The XML schema needs to provide all data necessary for the system to accurately perform each step without the need for the procedure writer to reprogram the CBPS. The research team at the Idaho National Laboratory has developed a prototype CBPS for field workers as well as the

Standardized Procedure Content And Data Structure Based On Human Factors Requirements For Computer-Based Procedures

Energy Technology Data Exchange (ETDEWEB)

Bly, Aaron; Oxstrand, Johanna; Le Blanc, Katya L

2015-02-01

Most activities that involve human interaction with systems in a nuclear power plant are guided by procedures. Traditionally, the use of procedures has been a paper-based process that supports safe operation of the nuclear power industry. However, the nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. Advances in digital technology make computer-based procedures (CBPs) a valid option that provides further enhancement of safety by improving human performance related to procedure use. The transition from paper-based procedures (PBPs) to CBPs creates a need for a computer-based procedure system (CBPS). A CBPS needs to have the ability to perform logical operations in order to adjust to the inputs received from either users or real time data from plant status databases. Without the ability for logical operations the procedure is just an electronic copy of the paper-based procedure. In order to provide the CBPS with the information it needs to display the procedure steps to the user, special care is needed in the format used to deliver all data and instructions to create the steps. The procedure should be broken down into basic elements and formatted in a standard method for the CBPS. One way to build the underlying data architecture is to use an Extensible Markup Language (XML) schema, which utilizes basic elements to build each step in the smart procedure. The attributes of each step will determine the type of functionality that the system will generate for that step. The CBPS will provide the context for the step to deliver referential information, request a decision, or accept input from the user. The XML schema needs to provide all data necessary for the system to accurately perform each step without the need for the procedure writer to reprogram the CBPS. The research team at the Idaho National Laboratory has developed a prototype CBPS for field workers as well as the

Improvements in Logic Diagram of Computerized Procedure System of APR1400

Energy Technology Data Exchange (ETDEWEB)

Kang, Sungkweon; Seong, Nokyu [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

The Computerized Procedure System (CPS) has been improved since it is installed in Shin-Kori 3 and 4 Nuclear Power Plants. It is one of operating support systems of digital Main Control Room (MCR) and provides many functions to operators in executing the procedure. CPS can effectively remove the human errors by supporting the procedure flow and logic diagram. This paper describes the logic diagram of CPS of reference power plant and shows the improved logic diagram of CPS of Shin-Kori unit 5 and 6. This paper describes the current logic diagram of CPS and suggests improved design for logic diagram. The improved logic diagram shall be validated through human factors engineering verification and validation. The improved design will help operators execute the computerized procedure fast and remove the human error.

The TOMAX-procedure

OpenAIRE

Overgoor, M.L.E.

2015-01-01

Most patients with a low spinal lesion (LSL) have intact erectile function but no penile sensation, which can lead to frustration. To tackle this problem, we designed TOMAX, TOMAXimize sensation, sexuality and quality of life, a surgical procedure in which a functional "groin” nerve is connected to the non-functional “penile” nerve on one side to bypass the LSL. Our goal was to increase LSL patients’ sexual health by restoring penile sensation: we show that TOMAX can achieve dramatic improvem...

47 CFR 1.1602 - Designation for random selection.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Designation for random selection. 1.1602 Section 1.1602 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Random Selection Procedures for Mass Media Services General Procedures § 1.1602 Designation for random selection...

Operating procedures for emergency situations in EDF PWR plants

International Nuclear Information System (INIS)

Depond, G.; Resse, L.

1992-01-01

Analysis of incidents and accidents occurring at French and foreign power plants - particularly the TMI accident - and the commissioning of many units in France, as well as tests on simulators, have all demonstrated that an improvement of safety in nuclear power units depends largely on the improvement of the man-machine interface and particularly of emergency operating procedures (EOP). EDF has taken numerous actions in this direction, especially since 1979. First of all, in improving the classical approach based on event-oriented procedures: Rewriting of initial accident operating procedures with regard to their technical contents their form, and the organization of the operating team (procedures I and A); Extension of initial procedures into areas at the limits of design basis and beyond the design basis limits (procedures H). Nevertheless, this approach is subject to several weaknesses. Dependence on a precise initial diagnosis, impossibility to take into account all the conceivable accidental situations, discrepancies between the predicted pattern and the reality. These drawbacks of the event approach have led us to revise the technical conception of the EOPs, and to develop a new approach based on a continuous monitoring of the physical states of the plant and the ability to define a relationship between the physical state of the plant and the operator actions. (author). 4 figs

Příběhy rekonstrukčních řezů historickým nadložím Pražského hradu

Czech Academy of Sciences Publication Activity Database

Boháčová, Ivana

2017-01-01

Roč. 10, č. 2 (2017), s. 108-124 ISSN 1803-1749. [Archeologie ve městě. Strategie, metodika, metody výzkumu, prezentace a ochrany archeologických památek. Mělník, 01.06.2016-03.06.2016] R&D Projects: GA MK(CZ) DF13P01OVV014 Keywords : archaeology * methodology * central site * Early Middle Ages Subject RIV: AC - Archeology, Anthropology, Ethnology OBOR OECD: Archaeology

Guide to Alabama Court Procedures.

Science.gov (United States)

Alabama Administrative Office of Courts, Montgomery.

Designed to assist the public in understanding the judicial system and judicial process in Alabama, this handbook (1) presents an overview of Alabama's courts and their jurisdictions, (2) identifies the officers of the courts and the contributions each makes to the judicial process, and (3) narrates in general terms the procedures most common to…

Expertise, following the 5.7.1977 decree: assessment of the procedure; Expertise, arrete du 5.7.77 - bilan de la procedure

Energy Technology Data Exchange (ETDEWEB)

Maillard, M. [Ministere de l`Industrie, des Postes et Telecommunications, 75 - Paris (France)

1996-12-31

The French Government decree concerning the periodical inspection and extensive examination procedure for plants and buildings where thermal energy is consumed, is presented. The inspection procedure is intended to control the thermal and electrical equipment, the regulation systems, the pollutant emission control systems and the waste heat recovery systems. Design recommendations, fuel substitution, pollution abatement, waste heat up-grading, etc. may be proposed by the expert

Cognition and procedure representational requirements for predictive human performance models

Science.gov (United States)

Corker, K.

1992-01-01

Models and modeling environments for human performance are becoming significant contributors to early system design and analysis procedures. Issues of levels of automation, physical environment, informational environment, and manning requirements are being addressed by such man/machine analysis systems. The research reported here investigates the close interaction between models of human cognition and models that described procedural performance. We describe a methodology for the decomposition of aircrew procedures that supports interaction with models of cognition on the basis of procedures observed; that serves to identify cockpit/avionics information sources and crew information requirements; and that provides the structure to support methods for function allocation among crew and aiding systems. Our approach is to develop an object-oriented, modular, executable software representation of the aircrew, the aircraft, and the procedures necessary to satisfy flight-phase goals. We then encode in a time-based language, taxonomies of the conceptual, relational, and procedural constraints among the cockpit avionics and control system and the aircrew. We have designed and implemented a goals/procedures hierarchic representation sufficient to describe procedural flow in the cockpit. We then execute the procedural representation in simulation software and calculate the values of the flight instruments, aircraft state variables and crew resources using the constraints available from the relationship taxonomies. The system provides a flexible, extensible, manipulative and executable representation of aircrew and procedures that is generally applicable to crew/procedure task-analysis. The representation supports developed methods of intent inference, and is extensible to include issues of information requirements and functional allocation. We are attempting to link the procedural representation to models of cognitive functions to establish several intent inference methods

Developing operating procedures for a low-level radioactive waste disposal facility

Energy Technology Data Exchange (ETDEWEB)

Sutherland, A.A.; Miner, G.L.; Grahn, K.F.; Pollard, C.G. [Rogers and Associates Engineering Corp., Salt Lake City, UT (United States)

1993-10-01

This document is intended to assist persons who are developing operating and emergency procedures for a low-level radioactive waste disposal facility. It provides 25 procedures that are considered to be relatively independent of the characteristics of a disposal facility site, the facility design, and operations at the facility. These generic procedures should form a good starting point for final procedures on their subjects for the disposal facility. In addition, this document provides 55 annotated outlines of other procedures that are common to disposal facilities. The annotated outlines are meant as checklists to assist the developer of new procedures.

Developing operating procedures for a low-level radioactive waste disposal facility

International Nuclear Information System (INIS)

Sutherland, A.A.; Miner, G.L.; Grahn, K.F.; Pollard, C.G.

1993-10-01

This document is intended to assist persons who are developing operating and emergency procedures for a low-level radioactive waste disposal facility. It provides 25 procedures that are considered to be relatively independent of the characteristics of a disposal facility site, the facility design, and operations at the facility. These generic procedures should form a good starting point for final procedures on their subjects for the disposal facility. In addition, this document provides 55 annotated outlines of other procedures that are common to disposal facilities. The annotated outlines are meant as checklists to assist the developer of new procedures

Design typology and design organisation

DEFF Research Database (Denmark)

Andreasen, Mogens Myrup; Wognum, N.; McAloone, Timothy Charles

2002-01-01

research society has recognised normative procedural models of designing as being a reasonable answer to the question: How do designing proceed? The reasoning behind the models, from which the design methodology model by [Pahl & Beitz 1995], may be seen as a characteristic one, was a mix of human problem......The idea of focusing upon the creation of a design typology was articulated by [Andreasen & Wognum 2000] and detailed by [Andreasen & Wognum 2001]. The aim was to propose a typology, which could serve as identification of design types and design research contributions. For a long period the design...... solving-, design management-, and artefact nature-reasoning. Critique has been raised to that type of models as being neither explanatory nor instructive. If we accept these models as merely being pragmatically "stepping-stone" explanations of what happens during designing, it is interesting to observe...

An XML Representation for Crew Procedures

Science.gov (United States)

Simpson, Richard C.

2005-01-01

NASA ensures safe operation of complex systems through the use of formally-documented procedures, which encode the operational knowledge of the system as derived from system experts. Crew members use procedure documentation on the ground for training purposes and on-board space shuttle and space station to guide their activities. Investigators at JSC are developing a new representation for procedures that is content-based (as opposed to display-based). Instead of specifying how a procedure should look on the printed page, the content-based representation will identify the components of a procedure and (more importantly) how the components are related (e.g., how the activities within a procedure are sequenced; what resources need to be available for each activity). This approach will allow different sets of rules to be created for displaying procedures on a computer screen, on a hand-held personal digital assistant (PDA), verbally, or on a printed page, and will also allow intelligent reasoning processes to automatically interpret and use procedure definitions. During his NASA fellowship, Dr. Simpson examined how various industries represent procedures (also called business processes or workflows), in areas such as manufacturing, accounting, shipping, or customer service. A useful method for designing and evaluating workflow representation languages is by determining their ability to encode various workflow patterns, which depict abstract relationships between the components of a procedure removed from the context of a specific procedure or industry. Investigators have used this type of analysis to evaluate how well-suited existing workflow representation languages are for various industries based on the workflow patterns that commonly arise across industry-specific procedures. Based on this type of analysis, it is already clear that existing workflow representations capture discrete flow of control (i.e., when one activity should start and stop based on when other

Computer-Based Procedures for Field Workers in Nuclear Power Plants: Development of a Model of Procedure Usage and Identification of Requirements

Energy Technology Data Exchange (ETDEWEB)

Katya Le Blanc; Johanna Oxstrand

2012-04-01

The nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. As a step toward the goal of improving procedure use performance, researchers, together with the nuclear industry, have been looking at replacing the current paper-based procedures with computer-based procedure systems. The concept of computer-based procedures is not new by any means; however most research has focused on procedures used in the main control room. Procedures reviewed in these efforts are mainly emergency operating procedures and normal operating procedures. Based on lessons learned for these previous efforts we are now exploring a more unknown application for computer based procedures - field procedures, i.e. procedures used by nuclear equipment operators and maintenance technicians. The Idaho National Laboratory and participants from the U.S. commercial nuclear industry are collaborating in an applied research effort with the objective of developing requirements and specifications for a computer-based procedure system to be used by field workers. The goal is to identify the types of human errors that can be mitigated by using computer-based procedures and how to best design the computer-based procedures to do so. This paper describes the development of a Model of Procedure Use and the qualitative study on which the model is based. The study was conducted in collaboration with four nuclear utilities and five research institutes. During the qualitative study and the model development requirements and for computer-based procedures were identified.

17 CFR 270.30a-3 - Controls and procedures.

Science.gov (United States)

2010-04-01

... and procedures, within the 90-day period prior to the filing date of each report on Form N-CSR (§§ 249... to be disclosed by the investment company on Form N-CSR (§§ 249.331 and 274.128 of this chapter) and... include, without limitation, controls and procedures designed to ensure that information required to be...

New procedure for departure formalities

CERN Multimedia

HR & GS Departments

2011-01-01

As part of the process of simplifying procedures and rationalising administrative processes, the HR and GS Departments have introduced new personalised departure formalities on EDH. These new formalities have applied to students leaving CERN since last year and from 17 October 2011 this procedure will be extended to the following categories of CERN personnel: Staff members, Fellows and Associates. It is planned to extend this electronic procedure to the users in due course. What purpose do departure formalities serve? The departure formalities are designed to ensure that members of the personnel contact all the relevant services in order to return any necessary items (equipment, cards, keys, dosimeter, electronic equipment, books, etc.) and are aware of all the benefits to which they are entitled on termination of their contract. The new departure formalities on EDH have the advantage of tailoring the list of services that each member of the personnel must visit to suit his individual contractual and p...

Structural Evaluation Procedures for Heavy Wood Truss Structures

National Research Council Canada - National Science Library

Issa, Mohsen

1998-01-01

.... An evaluation procedure for wood structures differs from conventional methods used in steel, concrete, and masonry structures because, in wood construction, the allowable stresses used in design...

Comparison of Designer's Design Thinking Modes in Digital and Traditional Sketches

Science.gov (United States)

Wu, Jun-Chieh; Chen, Cheng-Chi; Chen, Hsin-Chia

2012-01-01

The internal design thinking behaviour of designers in the concept development has been an important issue of cognitive psychology. In this study, the design thinking process designers have in applying digital media and traditional paper in the early concept development stage was explored. Special focus was made on the structure and procedure of…

Development of an engineering design process and associated systems and procedures for a UK geological disposal facility - 59160

International Nuclear Information System (INIS)

Rendell, Philip; Breen, Brendan; Clark, Alastair; Reece, Steve; O'Grady, Henry

2012-01-01

implemented for the identification, capture, analysis, update, verification, validation and acceptance of requirements for the GDF. This is to ensure that there are traceable links between requirements, and to identify and record the verification/ validation of individual requirements. This paper describes the engineering design process and the supporting documents, systems and procedures. The paper addresses the relationship to the geological disposal programme timeline in 'Geological Disposal - Steps towards implementation' and, from there, to the UK Government 'Managing Radioactive Waste Safely' Programme. It also describes the next steps in the development of the design process, and some of the lessons learnt to date. (authors)

Design What?%

DEFF Research Database (Denmark)

Engholm, Ida

2017-01-01

processes, which require specific development methods across a wide range of disciplines, from industrial design over graphic communication to service and digital design and strategic corporate development. The book addresses both established methods and recent research in design processes at leading design...... idea to the end-result. The goal for this graphic non-fiction project is to document and present both historical and current developments in design methodology, from the early attempts at documenting procedures for design process management at the Bauhaus School in the 1920s to contemporary design...

Probabilistic assessment of flaw evaluation procedures for pressure vessel integrity

International Nuclear Information System (INIS)

Shaffer, D.H.; Bamford, W.H.; Jouris, G.M.

1980-01-01

Prudent design procedures, in order to err in the direction of conservative over-strength rather than risky under-strength, have taken bounding values rather than best estimates for material parameters, and wherever possible, used conservative input for the calculations. The growing data base for this work is now beginning to allow an assessment of the conservatism that has been incorporated into the design procedure. Quantitative estimates of the variability associated with crack growth rates and fracture toughness have been generated in connection with other studies, and it would be useful to incorporate such information into an overall assessment of the design margins that are prescribed. In addition to getting an estimate of the conservatism in the current procedure, this study should provide a useful insight into the relative degree of margin that is introduced at each stage of the flaw evaluation process. Identification of the step by step margins should lead to more effective data collection programs from which information for adequately controlling the design conservatism can be obtained. The study will also provide valuable guidance in fixing revised design reference curves and safety factors so that adequate overall margins can be maintained without excess conservatism. This study is limited to vessel rupture in a brittle mode, and examples for illustration are particularly related to the beltline region of a reactor pressure vessel. The methodology, however, is applicable to all regions for which the required stress analyses, operating history, and material parameters are available. The work being carried out here is in consonance with ASME Section XI on Flaw Evaluation Procedures. It is concerned both with flaws under normal operating conditions and flaws under faulted conditions. (author)

Procedures monitoring and MAAP analysis

International Nuclear Information System (INIS)

May, R.S.

1991-01-01

Numerous studies of severe accidents in light water reactors have shown that operator response can play a crucial role in the predicted outcomes of dominant accident scenarios. MAAP provides the capability to specify certain operator actions as input data. However, making reasonable assumptions about the nature and timing of operator response requires substantial knowledge about plant practices and procedures and what they imply for the event being analyzed. The appearance of knowledge based software technology in the mid-1980s provided a natural format for representing and maintaining procedures as IF-THEN rules. The boiling water reactor (BWR) Emergency Operating Procedures Tracking System (EOPTS) was composed of a rule base of procedures and a dedicated inference engine (problem-solver). Based on the general approach and experience of EOPTS, the authors have developed a prototype procedures monitoring system that reads MAAP transient output files and evaluate the EOP messages and instructions that would be implied during each transient time interval. The prototype system was built using the NEXPERT OBJECT expert system development system, running on a 386-class personal computer with 4 MB of memory. The limited scope prototype includes a reduced set of BWR6 EOPs procedures evaluation on a coarse time interval, a simple text-based user interface, and a summary-report generator. The prototype, which is limited to batch-mode analysis of MAAP output, is intended to demonstrate the concept and aid in the design of a production system, which will involve a direct link to MAAP and interactive capabilities

A computerized system for improved management and execution of plant procedures

International Nuclear Information System (INIS)

Lipner, M.H.; Orendi, R.G.; Impink, A.J.; Mundy, R.A.

1987-01-01

The authors have shown how the deficiencies reported in this paper can be resolved by using the Computerized Procedures System. The Westinghouse Computerized Procedures System solves many of the human performance problems associated with procedures. It has been designed to assist plant operators in executing procedures more efficiently and cost effectively. The system brings all of the necessary information to one location for easy and continuous assessment of plant conditions and permits the operator to concentrate on the big picture

Framework for a procedure for design for durability

NARCIS (Netherlands)

Siemes, A.J.M.

1996-01-01

The design for durability of structures and building components is in general based on implicit requirements with respect to the quality and dimensions of the composing building materials and components. These requirements are based on long term experience. This approach has disadvantages. It is

Acceptance test procedure: RMW Land Disposal Facility Project W-025

International Nuclear Information System (INIS)

Roscha, V.

1994-01-01

This ATP establishes field testing procedures to demonstrate that the electrical/instrumentation system functions as intended by design for the Radioactive Mixed Waste Land Disposal Facility. Procedures are outlined for the field testing of the following: electrical heat trace system; transducers and meter/controllers; pumps; leachate storage tank; and building power and lighting

Designing sustainable energy landscapes : concepts, principles and procedures

NARCIS (Netherlands)

Stremke, S.

2010-01-01

The depletion of fossil fuels, in combination with climate change, necessitates a transition to sustainable energy systems. Such systems are characterized by a decreased energy demand and an increase in the use of renewables. The objective of this dissertation is to advance the planning and design

Surface moisture measurement system hardware acceptance test procedure

International Nuclear Information System (INIS)

Ritter, G.A.

1996-01-01

The purpose of this acceptance test procedure is to verify that the mechanical and electrical features of the Surface Moisture Measurement System are operating as designed and that the unit is ready for field service. This procedure will be used in conjunction with a software acceptance test procedure, which addresses testing of software and electrical features not addressed in this document. Hardware testing will be performed at the 306E Facility in the 300 Area and the Fuels and Materials Examination Facility in the 400 Area. These systems were developed primarily in support of Tank Waste Remediation System (TWRS) Safety Programs for moisture measurement in organic and ferrocyanide watch list tanks

Neigiamojo standumo vibroizoliacinio staliuko „MINUS K 500BM-1“ tyrimas

Directory of Open Access Journals (Sweden)

Vitalija Meškelytė

2012-01-01

Full Text Available Nagrinėjamas neigiamojo standumo (angl. negative-stiffness vibroizoliacinio staliuko „Minus K 500BM-1“ efektyvumas 2–110 Hz diapazone. Apžvelgti kiti galimi vibroizoliacijos būdai. Atlikti eksperimentiniai vibracijų perduodamumo tyrimai. Išbandyta speciali vibracijų žadinimo įranga, leidžianti atlikti numatytus bandomojo objekto tyrimus. Aprašyta eksperimentinių tyrimų metodika. Pateikti eksperimentų metu gauti rezultatai ir išvados.

REVIEW Of COMPUTERIZED PROCEDURE GUIDELINES FOR NUCLEAR POWER PLANT CONTROL ROOMS

Energy Technology Data Exchange (ETDEWEB)

David I Gertman; Katya Le Blanc; Ronald L Boring

2011-09-01

Computerized procedures (CPs) are recognized as an emerging alternative to paper-based procedures for supporting control room operators in nuclear power plants undergoing life extension and in the concept of operations for advanced reactor designs. CPs potentially reduce operator workload, yield increases in efficiency, and provide for greater resilience. Yet, CPs may also adversely impact human and plant performance if not designed and implemented properly. Therefore, it is important to ensure that existing guidance is sufficient to provide for proper implementation and monitoring of CPs. In this paper, human performance issues were identified based on a review of the behavioral science literature, research on computerized procedures in nuclear and other industries, and a review of industry experience with CPs. The review of human performance issues led to the identification of a number of technical gaps in available guidance sources. To address some of the gaps, we developed 13 supplemental guidelines to support design and safety. This paper presents these guidelines and the case for further research.

Administrative Procedure Act and mass procedures (illustrated by the nuclear licensing procedure)

International Nuclear Information System (INIS)

Naumann, R.

1977-01-01

The report deals with the administrative procedure law of 25.5.76 of the Fed. Government, esp. with its meaning for the administrative procedures for the permission for nuclear power plants, as fas ar so-called mass procedures are concerned. (UN) [de

Interim Procedures Safeguarding Mobile Devices during International Travel

Science.gov (United States)

This procedure is for safeguarding EPA information and systems for all employees, contractors, and other users while on international travel or to specifically designated locations within the United States and foreign embassies.

Breakwater design

OpenAIRE

Verhagen, H.J.; van den Bos, J.P.

2017-01-01

For this book we have deliberately chosen that the text should follow a more or less logical design procedure for breakwaters. It follows the required design steps from the system level down to the individual crosssection level, and in time from conceptual design to construction. This systematic approach starts at the functional description of breakwaters, system analysis including side-effects and derivation of boundary conditions and continues to the actual design, first of the main armour ...

Effective and efficient learning in the operating theater with intraoperative video-enhanced surgical procedure training

OpenAIRE

van Det, M.J.; Meijerink, W.J.; Hoff, C.; Middel, B.; Pierie, J.P.

2013-01-01

INtraoperative Video Enhanced Surgical procedure Training (INVEST) is a new training method designed to improve the transition from basic skills training in a skills lab to procedural training in the operating theater. Traditionally, the master-apprentice model (MAM) is used for procedural training in the operating theater, but this model lacks uniformity and efficiency at the beginning of the learning curve. This study was designed to investigate the effectiveness and efficiency of INVEST co...

Metodika auditu webových stránek

OpenAIRE

Jirsa, Tomáš

2010-01-01

Websites have a significant impact on the competitiveness of organizations. Therefore it is necessary to deal with aspects that affect their success. At least it is worth to detect weaknesses which can be repaired with minimal effort and which baffle effective use of the site. It is possible to use quite a number of audit methods and tools but the global approach to this issue is missing. The aim of this thesis is to create audit methodology and its implementation into the online tool, to all...

Computer managed emergency operating procedures

International Nuclear Information System (INIS)

Salamun, I.; Mavko, B.; Stritar, A.

1994-01-01

New computer technology is a very effective tool for developing a new design of nuclear power plant control room. It allows designer possibility to create a tool for managing with large database of power plant parameters and displaying them in different graphic forms and possibility of automated execution of well known task. The structure of Emergency Operating Procedures (EOP) is very suitable for programming and for creating expert system. The Computerized Emergency Operating Procedures (CEOP) described in this paper can be considered as an upgrading of standard EOP approach. EmDiSY (Emergency Display System - computer code name for CEOP) main purpose is to supply the operator with necessary information, to document all operator actions and to execute well known tasks. It is a function oriented CEOP that gives operator guidance on how to verify the critical safety functions and how to restore and maintain these functions where they are degraded. All knowledge is coded and stored in database files. The knowledge base consists from stepping order for verifying plant parameters, desired values of parameters, conditions for comparison and links between procedures and actions. Graphical shell allows users to read database, to follow instruction and to find out correct task. The desired information is concentrated in one screen and allows users to focus on a task. User is supported in two ways: desired parameter values are displayed on the process picture and automated monitoring critical safety function status trees are all time in progress and available to the user. (author). 4 refs, 4 figs

40 CFR 240.203-2 - Recommended procedures: Design.

Science.gov (United States)

2010-07-01

..., easy to maintain, and consistent with the land use of the area. (d) Employee convenience facilities and... operating unit malfunctions. (j) Sampling capability should be designed into the facility so that each process stream can be sampled, and the utilities required to do so should be close at hand. The sampling...

Biased Decision Making in Realistic Extra-Procedural Nuclear Control Room Scenarios

DEFF Research Database (Denmark)

Andersen, Emil; Kozin, Igor; Maier, Anja

In normal operations and emergency situations, operators of nuclear control rooms rely on procedures to guide their decision making. However, in emergency situations, where several interacting problems can cause unpredictable adverse effects, these procedures may be insufficient in guiding...... improve safety by creating procedures that bear the risks of these biases in mind, or by specifically aiming to debias the users. Avenues for debiasing through design are discussed....

SQUG cable tray and conduit evaluation procedure

International Nuclear Information System (INIS)

Smith, P.D.; Eder, S.J.; Conoscente, J.P.

1990-01-01

Cable tray and conduit systems for electrical cables are a common feature and industrial facilities. They have an excellent performance history in past strong earthquake, even though they are rarely designed for earthquakes. Considerable data have been gathered on their performance in earthquakes and in shake table testing. The data have been used to develop a procedure for the verification of the seismic adequacy of cable tray and conduit systems in operating nuclear plants. The procedure is discussed in this paper. It will result in substantial savings, such as reduced engineering effort, fewer modifications of existing hardware, and simpler documentation, relative to alternate procedures like dynamic analysis of shake table testing. The procedure ensures safety-function in a unique manner since the methodology used to develop it (1) is based on a large body of historical data and (2) uses a relative approach of ensuring that nuclear plant systems will perform at least as well as systems that performed well in past earthquakes. (orig.)

A procedure for effective Dancoff factor calculation

International Nuclear Information System (INIS)

Milosevic, M.

2001-01-01

In this paper, a procedure for Dancoff factors calculation based on equivalence principle and its application in the SCALE-4.3 code system is described. This procedure is founded on principle of conservation of neutron absorption for resolved resonance range in a heterogeneous medium and an equivalent medium consisted of an infinite array of two-region pin cells, where the presence of other fuel rods is taken into account through a Dancoff factor. The neutron absorption in both media is obtained using a fine-group elastic slowing-down calculation. This procedure is implemented in a design oriented lattice physics code, which is applicable for any geometry where the method of collision probability is possible to apply to get a flux solution. Proposed procedure was benchmarked for recent exercise that represents a system with a fuel double heterogeneity, i.e., fuel in solid form (pellets) surrounded by fissile material in solution, and for a 5x5 irregular pressurised water reactor assembly, which requires different Dancoff factors. (author)

An Evaluation of the Use of Statistical Procedures in Soil Science

Directory of Open Access Journals (Sweden)

Laene de Fátima Tavares

2016-01-01

Full Text Available ABSTRACT Experimental statistical procedures used in almost all scientific papers are fundamental for clearer interpretation of the results of experiments conducted in agrarian sciences. However, incorrect use of these procedures can lead the researcher to incorrect or incomplete conclusions. Therefore, the aim of this study was to evaluate the characteristics of the experiments and quality of the use of statistical procedures in soil science in order to promote better use of statistical procedures. For that purpose, 200 articles, published between 2010 and 2014, involving only experimentation and studies by sampling in the soil areas of fertility, chemistry, physics, biology, use and management were randomly selected. A questionnaire containing 28 questions was used to assess the characteristics of the experiments, the statistical procedures used, and the quality of selection and use of these procedures. Most of the articles evaluated presented data from studies conducted under field conditions and 27 % of all papers involved studies by sampling. Most studies did not mention testing to verify normality and homoscedasticity, and most used the Tukey test for mean comparisons. Among studies with a factorial structure of the treatments, many had ignored this structure, and data were compared assuming the absence of factorial structure, or the decomposition of interaction was performed without showing or mentioning the significance of the interaction. Almost none of the papers that had split-block factorial designs considered the factorial structure, or they considered it as a split-plot design. Among the articles that performed regression analysis, only a few of them tested non-polynomial fit models, and none reported verification of the lack of fit in the regressions. The articles evaluated thus reflected poor generalization and, in some cases, wrong generalization in experimental design and selection of procedures for statistical analysis.

Optimum Design of High Speed Prop-Rotors

Science.gov (United States)

Chattopadhyay, Aditi

1992-01-01

The objective of this research is to develop optimization procedures to provide design trends in high speed prop-rotors. The necessary disciplinary couplings are all considered within a closed loop optimization process. The procedures involve the consideration of blade aeroelastic, aerodynamic performance, structural and dynamic design requirements. Further, since the design involves consideration of several different objectives, multiobjective function formulation techniques are developed.

Preliminary seismic design of dynamically coupled structural systems

International Nuclear Information System (INIS)

Pal, N.; Dalcher, A.W.; Gluck, R.

1977-01-01

In this paper, the analysis criteria for coupling and decoupling, which are most commonly used in nuclear design practice, are briefly reviewed and a procedure outlined and demonstrated with examples. Next, a criterion judged to be practical for preliminary seismic design purposes is defined. Subsequently, a technique compatible with this criterion is suggested. A few examples are presented to test the proposed procedure for preliminary seismic design purposes. Limitations of the procedure are also discussed and finally, the more important conclusions are summarized

Computer–Based Procedures for Nuclear Power Plant Field Workers: Preliminary Results from Two Evaluation Studies

Energy Technology Data Exchange (ETDEWEB)

Katya L Le Blanc; Johanna H Oxstrand

2013-10-01

The Idaho National Laboratory and participants from the U.S. nuclear industry are collaborating on a research effort aimed to augment the existing guidance on computer-based procedure (CBP) design with specific guidance on how to design CBP user interfaces such that they support procedure execution in ways that exceed the capabilities of paper-based procedures (PBPs) without introducing new errors. Researchers are employing an iterative process where the human factors issues and interface design principles related to CBP usage are systematically addressed and evaluated in realistic settings. This paper describes the process of developing a CBP prototype and the two studies conducted to evaluate the prototype. The results indicate that CBPs may improve performance by reducing errors, but may increase the time it takes to complete procedural tasks.

Subgrade design models

CSIR Research Space (South Africa)

Theyse, HL

2002-02-01

Full Text Available procedure commonly used in South Africa, namely the South African Mechanistic-Empirical Design Method (SAMDM). This was achieved through the development of a new design approach and permanent deformation model for the pavement subgrade. The new distress...

Factors Affecting Patient Satisfaction During Endoscopic Procedures

International Nuclear Information System (INIS)

Qureshi, M. O.; Shafqat, F.; Ahmed, S.; Niazi, T. K.; Khokhar, N. K.

2013-01-01

Objective: To assess the quality and patient satisfaction in Endoscopy Unit of Shifa International Hospital. Study Design: Cross-sectional survey. Place and Duration of Study: Division of Gastroenterology, Shifa International Hospital, Islamabad, Pakistan, from July 2011 to January 2012. Methodology: Quality and patient satisfaction after the endoscopic procedure was assessed using a modified GHAA-9 questionnaire. Data was analyzed using SPSS version 16. Results: A total of 1028 patients were included with a mean age of 45 A+- 14.21 years. Out of all the procedures, 670 (65.17%) were gastroscopies, 181 (17.60%) were flexible sigmoidoscopies and 177 (17.21%) were colonoscopies. The maximum unsatisfactory responses were on the waiting time before the procedure (13.13 %), followed by unsatisfactory explanation of the procedure and answers to questions (7.58%). Overall, unsatisfied impression was 4.86%. The problem rate was 6.22%. Conclusion: The quality of procedures and level of satisfaction of patients undergoing a gastroscopy or colonoscopy was generally good. The factors that influence the satisfaction of these patients are related to communication between doctor and patient, doctor's manner and waiting time for the procedure. Feedback information in an endoscopy unit may be useful in improving standards, including the performance of endoscopists. (author)

Improving the efficiency of aerodynamic shape optimization procedures

Science.gov (United States)

Burgreen, Greg W.; Baysal, Oktay; Eleshaky, Mohamed E.

1992-01-01

The computational efficiency of an aerodynamic shape optimization procedure which is based on discrete sensitivity analysis is increased through the implementation of two improvements. The first improvement involves replacing a grid point-based approach for surface representation with a Bezier-Bernstein polynomial parameterization of the surface. Explicit analytical expressions for the grid sensitivity terms are developed for both approaches. The second improvement proposes the use of Newton's method in lieu of an alternating direction implicit (ADI) methodology to calculate the highly converged flow solutions which are required to compute the sensitivity coefficients. The modified design procedure is demonstrated by optimizing the shape of an internal-external nozzle configuration. A substantial factor of 8 decrease in computational time for the optimization process was achieved by implementing both of the design improvements.

Emergency procedures

International Nuclear Information System (INIS)

Abd Nasir Ibrahim; Azali Muhammad; Ab Razak Hamzah; Abd Aziz Mohamed; Mohammad Pauzi Ismail

2004-01-01

The following subjects are discussed - Emergency Procedures: emergency equipment, emergency procedures; emergency procedure involving X-Ray equipment; emergency procedure involving radioactive sources

Research on Operating Procedure Development in View of RCM Theory

International Nuclear Information System (INIS)

Shi, J.

2015-01-01

The operation of NPPs (nuclear power plants) is closely related to SSCs (Structure, System and Component) function implementations and failure recoveries, and strictly follows operating procedure. The philosophy of RCM (Reliability Centered Maintenance) which is a widely-used systematic engineering approach in industry focusing on likewise facility functions and effectiveness of maintenance is accepted in relative analysis of NPPs operation in this paper. Based on the theory of RCM, the paper will discuss general logic of operating procedure development and framework optimization as well combining NPPs engineering design. Since the quality of operating procedures has a significant impact on the safe and reliable operation of NPPs, the paper provides a proposed operating procedure development logic diagramme for reference for the procedure optimization task ahead. (author)

Instrument Calibration and Certification Procedure

Energy Technology Data Exchange (ETDEWEB)

Davis, R. Wesley [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-05-31

The Amptec 640SL-2 is a 4-wire Kelvin failsafe resistance meter, designed to reliably use very low-test currents for its resistance measurements. The 640SL-1 is a 2-wire version, designed to support customers using the Reynolds Industries type 311 connector. For both versions, a passive (analog) dual function DC Milliameter/Voltmeter allows the user to verify the actual 640SL output current level and the open circuit voltage on the test leads. This procedure includes tests of essential performance parameters. Any malfunction noticed during calibration, whether specifically tested for or not, shall be corrected before calibration continues or is completed.

Identifying cognitive complexity factors affecting the complexity of procedural steps in emergency operating procedures of a nuclear power plant

International Nuclear Information System (INIS)

Park, Jinkyun; Jeong, Kwangsup; Jung, Wondea

2005-01-01

In complex systems such as a nuclear and chemical plant, it is well known that the provision of understandable procedures that allow operators to clarify what needs to be done and how to do it is one of the requisites to secure their safety. As a previous study in providing understandable procedures, the step complexity (SC) measure that can quantify the complexity of procedural steps in emergency operating procedures (EOPs) of a nuclear power plant (NPP) was suggested. However, the necessity of additional complexity factors that can consider a cognitive aspect in evaluating the complexity of procedural steps is raised. To this end, the comparisons between operators' performance data measured by the form of a step performance time with their behavior in carrying out the prescribed activities of procedural steps are conducted in this study. As a result, two kinds of complexity factors (the abstraction level of knowledge and the level of engineering decision) that could affect an operator's cognitive burden are identified. Although a well-designed experiment is indispensable for confirming the appropriateness of the additional complexity factors, it is strongly believed that the change of operators' performance data can be more authentically explained if the additional complexity factors are taken into consideration

Identifying cognitive complexity factors affecting the complexity of procedural steps in emergency operating procedures of a nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Park, Jinkyun [Integrated Safety Assessment Division, Korea Atomic Energy Research Institute, P.O. Box 105, Duckjin-Dong, Yusong-Ku, Taejon 305-600 (Korea, Republic of)]. E-mail: kshpjk@kaeri.re.kr; Jeong, Kwangsup [Integrated Safety Assessment Division, Korea Atomic Energy Research Institute, P.O. Box 105, Duckjin-Dong, Yusong-Ku, Taejon 305-600 (Korea, Republic of); Jung, Wondea [Integrated Safety Assessment Division, Korea Atomic Energy Research Institute, P.O. Box 105, Duckjin-Dong, Yusong-Ku, Taejon 305-600 (Korea, Republic of)

2005-08-01

In complex systems such as a nuclear and chemical plant, it is well known that the provision of understandable procedures that allow operators to clarify what needs to be done and how to do it is one of the requisites to secure their safety. As a previous study in providing understandable procedures, the step complexity (SC) measure that can quantify the complexity of procedural steps in emergency operating procedures (EOPs) of a nuclear power plant (NPP) was suggested. However, the necessity of additional complexity factors that can consider a cognitive aspect in evaluating the complexity of procedural steps is raised. To this end, the comparisons between operators' performance data measured by the form of a step performance time with their behavior in carrying out the prescribed activities of procedural steps are conducted in this study. As a result, two kinds of complexity factors (the abstraction level of knowledge and the level of engineering decision) that could affect an operator's cognitive burden are identified. Although a well-designed experiment is indispensable for confirming the appropriateness of the additional complexity factors, it is strongly believed that the change of operators' performance data can be more authentically explained if the additional complexity factors are taken into consideration.

Identifying cognitive complexity factors affecting the complexity of procedural steps in emergency operating procedures of a nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Jinkyun Park; Kwangsup Jeong; Wondea Jung [Korea Atomic Energy Research Institute, Taejon (Korea). Integrated Safety Assessment Division

2005-08-15

In complex systems such as a nuclear and chemical plant, it is well known that the provision of understandable procedures that allow operators to clarify what needs to be done and how to do it is one of the requisites to secure their safety. As a previous study in providing understandable procedures, the step complexity (SC) measure that can quantify the complexity of procedural steps in emergency operating procedures (EOPs) of a nuclear power plant (NPP) was suggested. However, the necessity of additional complexity factors that can consider a cognitive aspect in evaluating the complexity of procedural steps is raised. To this end, the comparisons between operator' performance data measured by the form of a step performance time with their behavior in carrying out the prescribed activities of procedural steps are conducted in this study. As a result, two kinds of complexity factors (the abstraction level of knowledge and the level of engineering decision) that could affect an operator's cognitive burden are identified. Although a well-designed experiment is indispensable for confirming the appropriateness of the additional complexity factors, it is strongly believed that the change of operators' performance data can be more authentically explained if the additional complexity factors are taken into consideration. (author)

Emotion Monitoring – Verification of Physiological Characteristics Measurement Procedures

OpenAIRE

Landowska Agnieszka

2014-01-01

This paper concerns measurement procedures on an emotion monitoring stand designed for tracking human emotions in the Human-Computer Interaction with physiological characteristics. The paper addresses the key problem of physiological measurements being disturbed by a motion typical for human-computer interaction such as keyboard typing or mouse movements. An original experiment is described, that aimed at practical evaluation of measurement procedures performed at the emotion monitoring stand...

Procedure for estimating permanent total enclosure costs

Energy Technology Data Exchange (ETDEWEB)

Lukey, M.E.; Prasad, C.; Toothman, D.A.; Kaplan, N.

1999-07-01

Industries that use add-on control devices must adequately capture emissions before delivering them to the control device. One way to capture emissions is to use permanent total enclosures (PTEs). By definition, an enclosure which meets the US Environmental Protection Agency's five-point criteria is a PTE and has a capture efficiency of 100%. Since costs play an important role in regulatory development, in selection of control equipment, and in control technology evaluations for permitting purposes, EPA has developed a Control Cost Manual for estimating costs of various items of control equipment. EPA's Manual does not contain any methodology for estimating PTE costs. In order to assist environmental regulators and potential users of PTEs, a methodology for estimating PTE costs was developed under contract with EPA, by Pacific Environmental Services, Inc. (PES) and is the subject of this paper. The methodology for estimating PTE costs follows the approach used for other control devices in the Manual. It includes procedures for sizing various components of a PTE and for estimating capital as well as annual costs. It contains verification procedures for demonstrating compliance with EPA's five-point criteria. In addition, procedures are included to determine compliance with Occupational Safety and Health Administration (OSHA) standards. Meeting these standards is an important factor in properly designing PTEs. The methodology is encoded in Microsoft Exel spreadsheets to facilitate cost estimation and PTE verification. Examples are given throughout the methodology development and in the spreadsheets to illustrate the PTE design, verification, and cost estimation procedures.

Procedure for estimating permanent total enclosure costs

Energy Technology Data Exchange (ETDEWEB)

Lukey, M E; Prasad, C; Toothman, D A; Kaplan, N

1999-07-01

Industries that use add-on control devices must adequately capture emissions before delivering them to the control device. One way to capture emissions is to use permanent total enclosures (PTEs). By definition, an enclosure which meets the US Environmental Protection Agency's five-point criteria is a PTE and has a capture efficiency of 100%. Since costs play an important role in regulatory development, in selection of control equipment, and in control technology evaluations for permitting purposes, EPA has developed a Control Cost Manual for estimating costs of various items of control equipment. EPA's Manual does not contain any methodology for estimating PTE costs. In order to assist environmental regulators and potential users of PTEs, a methodology for estimating PTE costs was developed under contract with EPA, by Pacific Environmental Services, Inc. (PES) and is the subject of this paper. The methodology for estimating PTE costs follows the approach used for other control devices in the Manual. It includes procedures for sizing various components of a PTE and for estimating capital as well as annual costs. It contains verification procedures for demonstrating compliance with EPA's five-point criteria. In addition, procedures are included to determine compliance with Occupational Safety and Health Administration (OSHA) standards. Meeting these standards is an important factor in properly designing PTEs. The methodology is encoded in Microsoft Exel spreadsheets to facilitate cost estimation and PTE verification. Examples are given throughout the methodology development and in the spreadsheets to illustrate the PTE design, verification, and cost estimation procedures.

Differentiated Bayesian Conjoint Choice Designs

NARCIS (Netherlands)

Z. Sándor (Zsolt); M. Wedel (Michel)

2003-01-01

textabstractPrevious conjoint choice design construction procedures have produced a single design that is administered to all subjects. This paper proposes to construct a limited set of different designs. The designs are constructed in a Bayesian fashion, taking into account prior uncertainty about

40 CFR 63.1365 - Test methods and initial compliance procedures.

Science.gov (United States)

2010-07-01

... permit limit applicable to the process vent. (D) Design analysis based on accepted chemical engineering... concentration, temperature, and the reaction kinetics of the constituents with the scrubbing liquid. The design... procedures specified in Method 8260 or 8270 in “Test Methods for Evaluating Solid Waste, Physical/Chemical...

Design tools

Science.gov (United States)

Anton TenWolde; Mark T. Bomberg

2009-01-01

Overall, despite the lack of exact input data, the use of design tools, including models, is much superior to the simple following of rules of thumbs, and a moisture analysis should be standard procedure for any building envelope design. Exceptions can only be made for buildings in the same climate, similar occupancy, and similar envelope construction. This chapter...

Technical note: Design flood under hydrological uncertainty

Science.gov (United States)

Botto, Anna; Ganora, Daniele; Claps, Pierluigi; Laio, Francesco

2017-07-01

Planning and verification of hydraulic infrastructures require a design estimate of hydrologic variables, usually provided by frequency analysis, and neglecting hydrologic uncertainty. However, when hydrologic uncertainty is accounted for, the design flood value for a specific return period is no longer a unique value, but is represented by a distribution of values. As a consequence, the design flood is no longer univocally defined, making the design process undetermined. The Uncertainty Compliant Design Flood Estimation (UNCODE) procedure is a novel approach that, starting from a range of possible design flood estimates obtained in uncertain conditions, converges to a single design value. This is obtained through a cost-benefit criterion with additional constraints that is numerically solved in a simulation framework. This paper contributes to promoting a practical use of the UNCODE procedure without resorting to numerical computation. A modified procedure is proposed by using a correction coefficient that modifies the standard (i.e., uncertainty-free) design value on the basis of sample length and return period only. The procedure is robust and parsimonious, as it does not require additional parameters with respect to the traditional uncertainty-free analysis. Simple equations to compute the correction term are provided for a number of probability distributions commonly used to represent the flood frequency curve. The UNCODE procedure, when coupled with this simple correction factor, provides a robust way to manage the hydrologic uncertainty and to go beyond the use of traditional safety factors. With all the other parameters being equal, an increase in the sample length reduces the correction factor, and thus the construction costs, while still keeping the same safety level.

Preliminary design review: Brayton Isotope Power System

International Nuclear Information System (INIS)

The design aspects covered include flight system design, design criteria/margins/reliability, GDS design, system analysis, materials, system assembly procedure, and government furnished equipment-BTPS

A novel stone retrieval basket for more efficient lithotripsy procedures.

Science.gov (United States)

Salimi, N; Mahajan, A; Don, J; Schwartz, B

2009-01-01

This paper presents the development of an improved stone retrieval device that uses a newly designed cage of Nitinol wires encompassing a mesh basket made of a material that is laser resistant. Current methods to extract large stones involve imaging, using a laser to fragment the stones and then using existing cage-like baskets to trap the fragments individually and extracting them one at a time. These procedures are tedious, and may result in leaving some fragments behind that can reform causing the need for another procedure. The device presented in this paper will have a mesh-like sack which will consist of a laser resistant material of polytetrafluoroethylene (PTFE) enclosed within a newly designed Nitinol cage. Two alternate designs are provided for the cage in this paper. The handle of the device is revised to allow for a 3 Fr (1 mm) opening such that a laser's fiber optic cable can enter the device. Using this device a laser can be used to fragment the stone, and all the fragments are retained in the basket in both the design options. The basket can then be retracted allowing for the retrieval of all the fragments in one shot. The stone retrieval basket presented in this paper will significantly improve the efficiency and effectiveness of lithotripsy procedures for removal of large kidney and biliary tract stones.

Design Criteria Based on Aesthetic Considerations

DEFF Research Database (Denmark)

Thomsen, Bente Dahl

2009-01-01

Aesthetic criteria for designs are often debated in a very subjective manner which makes it difficult to reach consensus. In order to have a more rational and transparent process, in particular in industrial design, we propose a procedure based on Baumgarten's aesthetic considerations and Thommesen......'s dividing of a form into form elements. The procedure has been tested in student projects....

Drilling supervision procedure for the Exploratory Shaft Facility: Final draft

International Nuclear Information System (INIS)

1986-11-01

Drilling supervision will be undertaken in the Exploratory Shaft Facility (ESF) for boreholes drilled primarily for the purpose of hydrologic testing, downhole mechanical/thermal testing, sampling for laboratory testing, and for the placement of instrumentation. The primary purpose of this procedure is documentation of drilling activities prescribed by other procedures. Supervision of drilling includes designation of positions of authority, lines of communication, and methodology of supervising, monitoring, and documenting drilling and associated activities. The rationale for the specific applications of core drilling is provided by the test procedures for each activity. 2 figs

47 CFR 1.2103 - Competitive bidding design options.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Competitive bidding design options. 1.2103 Section 1.2103 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Competitive Bidding Proceedings General Procedures § 1.2103 Competitive bidding design options. (a) The...

An optimal range of information quantity on computer-based procedure interface design in the advanced main control room

International Nuclear Information System (INIS)

Hsieh Minchih; Chiu Mingchuan; Hwang Sheueling

2015-01-01

The quantification of information in the interface design is a critical issue. Too much information on an interface can confuse a user while executing a task, and too little information may result in poor user performance. This study focused on the quantification of visible information on computer-based procedures (CBPs). Levels of information quantity and task complexity were considered in this experiment. Simulated CBPs were developed to consist of three levels: high (at least 10 events, i.e. 3.32 bits), medium (4–8 events, i.e. 2–3 bits), and low information quantity (1 or 2 events, i.e. 0 or 1 bits). Task complexity comprised two levels: complex tasks and simple tasks. The dependent variables include operation time, secondary task performance, and mental workload. Results suggested that medium information quantity of five to eight events has a remarkable advantage in supporting operator performance under both simple and complex tasks. This research not only suggested the appropriate range of information quantity on the CBP interface, but also complemented certain deficient results of previous CBP interface design studies. Additionally, based on results obtained by this study, the quantification of information on the CBP interface should be considered to ensure safe operation of nuclear power plants. (author)

Satiation therapy: a procedure for reducing deviant sexual arousal.

Science.gov (United States)

Marshall, W L

1979-01-01

Two single-case experiments demonstrated the efficacy of satiation therapy with adult males who had long-standing deviant sexual interests. The procedure involves the pairing of prolonged masturbation (1 hour) with the verbalization by the patient of his deviant sexual fantasies and in both cases the designs permitted the attribution of control over aberrant responding to the satiation therapy. The results are discussed in terms of the possible active ingredients of the procedure. PMID:511807

A Procedure for Building Product Models in Intelligent Agent-based OperationsManagement

DEFF Research Database (Denmark)

Hvam, Lars; Riis, Jesper; Malis, Martin

2003-01-01

This article presents a procedure for building product models to support the specification processes dealing with sales, design of product variants and production preparation. The procedure includes, as the first phase, an analysis and redesign of the business processes that are to be supported b...

The characteristics of the Westinghouse accident procedures and the main differences with SOP

International Nuclear Information System (INIS)

Hu Yan; Gan Peijiang; Sun Chen

2014-01-01

In this note, the Westinghouse operation file system is summarized. The structures of procedures, design methods, implementation logics of the Westinghouse accident procedures are discussed. And compared with the SOP principles, the main differences are clarified. (authors)

Design of a rotary reactor for chemical-looping combustion. Part 1: Fundamentals and design methodology

KAUST Repository

Zhao, Zhenlong; Iloeje, Chukwunwike O.; Chen, Tianjiao; Ghoniem, Ahmed F.

2014-01-01

of the OC characteristics, the design parameters, and the operating conditions are studied. The design procedures are presented on the basis of the relative importance of each parameter, enabling a systematic methodology of selecting the design parameters

Reviewing the College Disciplinary Procedure. Mendip Papers.

Science.gov (United States)

Kedney, R. J.; Saunders, R.

This paper provides practical advice on reviewing and designing disciplinary procedures and is set in the context of incorporation of further education and sixth form colleges in England. Reasons are provided for having disciplinary rules, based on the Advisory Conciliation and Arbitration Service's (ACAS) Code of Practice. Relevant English…

Design automation of switching mode high voltage power supply for nuclear instruments

International Nuclear Information System (INIS)

El-araby, S.M.S.

1999-01-01

This paper presents an automation procedure for the design of switching mode high voltage power supplies, using Pc programming facility. The procedure permits the selection of a ready made or designed ferrite transformer. This selection could be achieved according to the designer desire; as the program includes complete information about ready made ferrite transformer through complete database. The procedure is based on suggested template circuit. Micro-Cap IV simulation package is used to verify the desired high voltage power supply design. Simulation results agree quite well with suggested procedure's results. Design aspects and development needed to increase automation capabilities are also discussed

Effective and efficient learning in the operating theater with intraoperative video-enhanced surgical procedure training

NARCIS (Netherlands)

van Det, M.J.; Meijerink, W.J.; Hoff, C.; Middel, B.; Pierie, J.P.

INtraoperative Video Enhanced Surgical procedure Training (INVEST) is a new training method designed to improve the transition from basic skills training in a skills lab to procedural training in the operating theater. Traditionally, the master-apprentice model (MAM) is used for procedural training

Procedures for Determining the Performance of Stand-Alone Photovoltaic Systems; TOPICAL

International Nuclear Information System (INIS)

DeBlasio, R.; Durand, S.; Hansen, R.; Hutchinson, P.; Kroposki, B.; McNutt, P.; Rosenthal, A.; Thomas, M.

1999-01-01

This document provides the procedures for determining the performance of stand-alone PV systems. The procedures in this document provide a common approach for evaluating whether a given PV system is suitable to perform the function for which it was designed and manufactured to accomplish, and whether it will provide adequate power to run the load. These procedures cover small stand-alone PV systems. They cover complete outdoor system testing. Test results are valid only for the system that is tested

Structural analysis and optimization procedure of the TFTR device substructure

International Nuclear Information System (INIS)

Driesen, G.

1975-10-01

A structural evaluation of the TFTR device substructure is performed in order to verify the feasibility of the proposed design concept as well as to establish a design optimization procedure for minimizing the material and fabrication cost of the substructure members. A preliminary evaluation of the seismic capability is also presented. The design concept on which the analysis is based is consistent with that described in the Conceptual Design Status Briefing report dated June 18, 1975

An analysis of contingency statements in a DRO procedure: A case report.

Science.gov (United States)

Gerow, Stephanie; Rispoli, Mandy; Boles, Margot B; Neely, Leslie C

2015-06-01

To examine latency to criterion for reduction of challenging behaviour with and without stating a contingency statement immediately prior to a DRO procedure. An ABAC design in which A was baseline, B was used to evaluate the efficacy of a DRO procedure, and C was used to evaluate the efficacy of a DRO procedure with a contingency statement. The DRO with the contingency statement intervention was associated with a shorter latency to behaviour change than the DRO procedure without the contingency statement. These preliminary findings from this case study highlight the importance of examining the efficiency of behaviour change procedures. Directions for future research are provided.

Modeling, simulation, and design of SAW grating filters

Science.gov (United States)

Schwelb, Otto; Adler, E. L.; Slaboszewicz, J. K.

1990-05-01

A systematic procedure for modeling, simulating, and designing SAW (surface acoustic wave) grating filters, taking losses into account, is described. Grating structures and IDTs (interdigital transducers) coupling to SAWs are defined by cascadable transmission-matrix building blocks. Driving point and transfer characteristics (immittances) of complex architectures consisting of gratings, transducers, and coupling networks are obtained by chain-multiplying building-block matrices. This modular approach to resonator filter analysis and design combines the elements of lossy filter synthesis with the transmission-matrix description of SAW components. A multipole filter design procedure based on a lumped-element-model approximation of one-pole two-port resonator building blocks is given and the range of validity of this model examined. The software for simulating the performance of SAW grating devices based on this matrix approach is described, and its performance, when linked to the design procedure to form a CAD/CAA (computer-aided design and analysis) multiple-filter design package, is illustrated with a resonator filter design example.

48 CFR 43.203 - Change order accounting procedures.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Change order accounting... CONTRACT MANAGEMENT CONTRACT MODIFICATIONS Change Orders 43.203 Change order accounting procedures. (a) Contractors' accounting systems are seldom designed to segregate the costs of performing changed work...

Design of canals

CERN Document Server

Swamee, P K

2015-01-01

The book presents firsthand material from the authors on design of hydraulic canals. The book discusses elements of design based on principles of hydraulic flow through canals. It covers optimization of design based on usage requirements and economic constraints. The book includes explicit design equations and design procedures along with design examples for varied cases. With its comprehensive coverage of the principles of hydraulic canal design, this book will prove useful to students, researchers, and practicing engineers. End-of-chapter pedagogical elements make it ideal for use in graduate courses on hydraulic structures offered by most civil engineering departments across the world.

Development of critical digital review procedure

International Nuclear Information System (INIS)

Huang Huiwen; Liao Benching; Tseng Maosheng; Chung Hsianghan; Cheng Tsungchieh; Chen Minghuei

2011-01-01

This paper describes the critical digital review (CDR) procedure, which was developed by Institute of Nuclear Energy Research (INER), and sponsored by Taiwan Power Company (TPC). A preliminary CDR application experience which was performed by INER, is also described in this paper. Currently, CDR becomes one of the policies for digital Instrumentation and Control (I and C) system replacement in TPC. The contents of this CDR procedure include: Scope, Responsibility, Operation Procedure, Operation Flow Chart, CDR review items. The 'CDR Review Items' chapter proposes optional review items, including the comparison of the design change, Software Verification and Validation (SV and V), Failure Mode and Effects Analysis (FMEA), Evaluation of Watchdog Timer, Evaluation of Electromagnetic Compatibility (EMC), Evaluation of Grounding for System/Component, Seismic Evaluation, HFE Evaluation, Witness and Inspection, Lessons Learnt from the Digital I and C Failure Events. Since CDR has become a TPC policy, Chin Shan Nuclear Power Plant (NPP) performed the CDR practice of Automatic Voltage Regulator (AVR) digital I and C replacement, even though the project had been on the half way. The major review items of this CDR were: the comparison of the design change, SV and V, FMEA, Evaluation of Watchdog Timer, Evaluation of Electromagnetic Compatibility (EMC), Evaluation of Grounding for System/ Component, Witness and Inspection, Lessons Learnt from the Digital I and C Failure Events. The experience of the CDR showed the importance of preparation of the documents by the vendor. This means the communication with the vendors for the bid preparation is crucial. (author)

Comparing the Teaching Interaction Procedure to Social Stories for People with Autism

Science.gov (United States)

Leaf, Justin B.; Oppenheim-Leaf, Misty L.; Call, Nikki A.; Sheldon, Jan B.; Sherman, James A.; Taubman, Mitchell; McEachin, John; Dayharsh, Jamison; Leaf, Ronald

2012-01-01

This study compared social stories and the teaching interaction procedure to teach social skills to 6 children and adolescents with an autism spectrum disorder. Researchers taught 18 social skills with social stories and 18 social skills with the teaching interaction procedure within a parallel treatment design. The teaching interaction procedure…

Automated operator procedure prompting for startup of Experimental Breeder Reactor-2

International Nuclear Information System (INIS)

Renshaw, A.W.; Ball, S.J.; Ford, C.E.

1990-11-01

This report describes the development of an operator procedure prompting aid for startup of a nuclear reactor. This operator aid is a preliminary design for a similar aid that eventually will be used with the Advanced Liquid Metal Reactor (ALMR) presently in the design stage. Two approaches were used to develop this operator procedure prompting aid. One method uses an expert system software shell, and the other method uses database software. The preliminary requirements strongly pointed toward features traditionally associated with both database and expert systems software. Database software usually provides data manipulation flexibility and user interface tools, and expert systems tools offer sophisticated data representation and reasoning capabilities. Both methods, including software and associated hardware, are described in this report. Proposals for future enhancements to improve the expert system approach to procedure prompting and for developing other operator aids are also offered. 25 refs., 14 figs

Automated operator procedure prompting for startup of Experimental Breeder Reactor-2

Energy Technology Data Exchange (ETDEWEB)

Renshaw, A.W.; Ball, S.J.; Ford, C.E.

1990-11-01

This report describes the development of an operator procedure prompting aid for startup of a nuclear reactor. This operator aid is a preliminary design for a similar aid that eventually will be used with the Advanced Liquid Metal Reactor (ALMR) presently in the design stage. Two approaches were used to develop this operator procedure prompting aid. One method uses an expert system software shell, and the other method uses database software. The preliminary requirements strongly pointed toward features traditionally associated with both database and expert systems software. Database software usually provides data manipulation flexibility and user interface tools, and expert systems tools offer sophisticated data representation and reasoning capabilities. Both methods, including software and associated hardware, are described in this report. Proposals for future enhancements to improve the expert system approach to procedure prompting and for developing other operator aids are also offered. 25 refs., 14 figs.

Design of an ejector cycle refrigeration system

International Nuclear Information System (INIS)

Grazzini, G.; Milazzo, A.; Paganini, D.

2012-01-01

Highlights: ► A design procedure is presented for an ejection refrigeration system. ► Properties of applicable operating fluids are presented and R245fa is selected. ► Real gas properties are used. ► The diffuser is designed with a profile that controls momentum change. ► Fluid friction is accounted for along all main components. - Abstract: A design procedure, based on a one-dimensional simulation, is presented for an ejection refrigeration system. Heat exchangers are included in the calculation, accounting for temperature differences between the fluids and for pressure losses. The ideal gas assumption, which is quite common in the literature concerning ejector systems, is avoided. Furthermore, the supersonic diffuser is designed with a continuous profile, without cylindrical piece, controlling the variation of momentum along the flow path and accounting for friction. At design conditions, this should reduce the irreversibility due to the normal shock. A comparison between different operating fluids is presented and R245fa is selected. The results of the design procedure and the expected performance, in terms of first and second law efficiency, are presented.

Guidelines for the presentation of emergency operating procedures using advanced information technology

International Nuclear Information System (INIS)

Green, M.; Hollnagel, E.; Niwa, Yuji

1994-01-01

New methods of information presentation and interface design are changing the conditions for work in the modern NPP control room. One area receiving considerable attention is that of Emergency Operating Procedures (EOP). Conventionally such procedures are presented using hard copy manuals; however, development in IT means that there are new opportunities for the computerization of such procedures. This paper reports on the development of human factors guidelines for the computerized presentation of EOPs. After identifying the principle stages in the transition from procedures as documents to fully automated procedures, computerised procedure presentation is briefly discussed. Guidelines for the presentation of such procedures are outlined starting with the high level goals for guidelines themselves. Such goals also constitute the criteria against which the computerized procedures are measured during implementation. Six dimensions describing computerized procedure presentation are presented and two are explore in more detail by identifying points along each dimension that characterize different levels of IT sophistication. (author). 8 refs, 1 tab

Antrosios klasės gravimetrinių matavimų analizė

OpenAIRE

Purpurovič, Janina

2012-01-01

Baigiamajame magistro darbe atlikta Lietuvos ir Lenkijos gravimetrinių tinklų analizė. Apžvelgta IGSN 71 sunkio sistemos perdavimo metodika, išnagrinėtas gravimetrinių tinklų tikslumas. Pateikta informacija apie naujausią automatinį gravimetrą Scintrex CG-5, atlikta Lietuvos antrosios klasės gravimetrinio tinklo sudarymo metodikos detali analizė. Sudaryta gravimetrinių matavimų duomenų bazė, kuri gali būti naudojama gravimetrinių matavimų duomenų analizei. Panaudojant antrosios klasės gravime...

32 CFR 168a.4 - Policy and procedures.

Science.gov (United States)

2010-07-01

... to pursue graduate degrees in science, engineering, or other fields of study that are designated, in... DEFENSE SCIENCE AND ENGINEERING GRADUATE FELLOWSHIPS § 168a.4 Policy and procedures. (a) Sponsoring... nationwide competition in which all appropriate actions have been taken to encourage applications from...

Procedures for Calculating Residential Dehumidification Loads

Energy Technology Data Exchange (ETDEWEB)

Winkler, Jon [National Renewable Energy Lab. (NREL), Golden, CO (United States); Booten, Chuck [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-06-01

Residential building codes and voluntary labeling programs are continually increasing the energy efficiency requirements of residential buildings. Improving a building's thermal enclosure and installing energy-efficient appliances and lighting can result in significant reductions in sensible cooling loads leading to smaller air conditioners and shorter cooling seasons. However due to fresh air ventilation requirements and internal gains, latent cooling loads are not reduced by the same proportion. Thus, it's becoming more challenging for conventional cooling equipment to control indoor humidity at part-load cooling conditions and using conventional cooling equipment in a non-conventional building poses the potential risk of high indoor humidity. The objective of this project was to investigate the impact the chosen design condition has on the calculated part-load cooling moisture load, and compare calculated moisture loads and the required dehumidification capacity to whole-building simulations. Procedures for sizing whole-house supplemental dehumidification equipment have yet to be formalized; however minor modifications to current Air-Conditioner Contractors of America (ACCA) Manual J load calculation procedures are appropriate for calculating residential part-load cooling moisture loads. Though ASHRAE 1% DP design conditions are commonly used to determine the dehumidification requirements for commercial buildings, an appropriate DP design condition for residential buildings has not been investigated. Two methods for sizing supplemental dehumidification equipment were developed and tested. The first method closely followed Manual J cooling load calculations; whereas the second method made more conservative assumptions impacting both sensible and latent loads.

Levels for Hotline Miami 2: Wrong Number Using Procedural Content Generations

Directory of Open Access Journals (Sweden)

Joseph Alexander Brown

2018-04-01

Full Text Available Procedural Content Generation is the automatic process for generating game content in order to allow for a decrease in developer resources while adding to the replayability of a digital game. It has been found to be highly effective as a method when utilized in rougelike games, of which Hotline Miami 2: Wrong Number shares a number of factors. Search based procedural content, in this case, a genetic algorithm, allows for the creation of levels which meet with a number of designer set requirements. The generator proposed provides for an automatic creation of game content for a commercially available game: the level design, object placement, and enemy placement.

Microwave circulator design

CERN Document Server

Linkhart, Douglas K

2014-01-01

Circulator design has advanced significantly since the first edition of this book was published 25 years ago. The objective of this second edition is to present theory, information, and design procedures that will enable microwave engineers and technicians to design and build circulators successfully. This resource contains a discussion of the various units used in the circulator design computations, as well as covers the theory of operation. This book presents numerous applications, giving microwave engineers new ideas about how to solve problems using circulators. Design examples are provided, which demonstrate how to apply the information to real-world design tasks.

Geologic mapping procedure: Final draft

International Nuclear Information System (INIS)

1987-09-01

Geologic mapping will provide a baseline record of the subsurface geology in the shafts and drifts of the Exploratory Shaft Facility (ESF). This information will be essential in confirming the specific repository horizon, selecting representative locations for the in situ tests, providing information for construction and decommissioning seal designs, documenting the excavation effects, and in providing information for performance assessment, which relates to the ultimate suitability of the site as a nuclear waste repository. Geologic mapping will be undertaken on the walls and roof, and locally on the floor within the completed At-Depth Facility (ADF) and on the walls of the two access shafts. Periodic mapping of the exposed face may be conducted during construction of the ADF. The mapping will be oriented toward the collection and presentation of geologic information in an engineering format and the portrayal of detailed stratigraphic information which may be useful in confirmation of drillhole data collected as part of the surface-based testing program. Geologic mapping can be considered as a predictive tool as well as a means of checking design assumptions. This document provides a description of the required procedures for geologic mapping for the ESF. Included in this procedure is information that qualified technical personnel can use to collect the required types of geologic descriptions, at the appropriate level of detail. 5 refs., 3 figs., 1 tab

Design of nested Halbach cylinder arrays for magnetic refrigeration applications

Energy Technology Data Exchange (ETDEWEB)

Trevizoli, Paulo V., E-mail: trevizoli@polo.ufsc.br; Lozano, Jaime A.; Peixer, Guilherme F.; Barbosa Jr, Jader R.

2015-12-01

We present an experimentally validated analytical procedure to design nested Halbach cylinder arrays for magnetic cooling applications. The procedure aims at maximizing the magnetic flux density variation in the core of the array for a given set of design parameters, namely the inner diameter of the internal magnet, the air gap between the magnet cylinders, the number of segments of each magnet and the remanent flux density of the Nd{sub 2}Fe{sub 14}B magnet grade. The design procedure was assisted and verified by 3-D numerical modeling using a commercial software package. An important aspect of the optimal design is to maintain an uniform axial distribution of the magnetic flux density in the region of the inner gap occupied by the active magnetocaloric regenerator. An optimal nested Halbach cylinder array was manufactured and experimentally evaluated for the magnetic flux density in the inner gap. The analytically calculated magnetic flux density variation agreed to within 5.6% with the experimental value for the center point of the magnet gap. - Highlights: • An analytical procedure to design nested Halbach cylinder arrays is proposed. • An optimal magnet configuration was built based on the analytical procedure. • The procedure was validated with 3D COMSOL simulations and experimental data.

Time Optimal Synchronization Procedure and Associated Feedback Loops

CERN Document Server

Angoletta, Maria Elena; CERN. Geneva. ATS Department

2016-01-01

A procedure to increase the speed of currently used synchronization loops in a synchrotron by an order of magnitude is presented. Beams dynamics constraint imposes an upper limit on excursions in stable phase angle, and the procedure presented exploits this limit to arrive in the synchronized state from an arbitrary initial state in the fastest possible way. Detailed corrector design for beam phase loop, differential frequency loop and final synchronization loop is also presented. Finally, an overview of the synchronization methods currently deployed in some other CERN’s machines is provided, together with a brief comparison with the newly proposed time-optimal algorithm.

The computerised procedure system COPMA and its user interface

International Nuclear Information System (INIS)

Krogsaeter, M.; Larsen, J.; Nilsen, S.; Oewre, F.

1990-01-01

At the OECD Halden Reactor Project, the COPMA system has been developed in order to investigate whether procedures can be executed more safety and efficiently if they are computerised, i.e. if the operator uses a CRT-based system instead of written manuals. Procedures are entered in a procedure data base using PED, a procedure editor. Each procedure is given a textual as well as a graphical representation. For the textual representation, the language PROLA is used, a language which has been designed for simple procedure specification. The COPMA online system lets the operator execute procedures that are stored in the procedure data base. The operator interface is a screen divided into non-overlapping windows each serving a different purpose. All commands to the system are given by moving a mouse device around and clicking buttons on top of the mouse. A procedure consists of steps, each step containing a number of instructions. The operator works on one activity at a time, an activity to be seen as a procedure instance. A graph shows the overall procedure (or activity) structure in a window and activity execution is traced in the graph. Another windows shows the instructions of the step currently being executed. The operator steps through the activity by selecting whether and how to execute the listed instructions. COPMA can maintain the status of several activities in parallel, so that the operator can easily switch between different activities. COPMA is linked to a PWR nuclear simulator over Ethernet using the TCP/IP protocol. This gives a number of advantages as compared to conventional written procedures, especially the fact that COPMA can help collect data from the procedure data base automatically

An Integrated Procedure for the Structural Design of a Composite Rotor-Hydrofoil of a Water Current Turbine (WCT)

Science.gov (United States)

Oller Aramayo, S. A.; Nallim, L. G.; Oller, S.

2013-12-01

This paper shows an integrated structural design optimization of a composite rotor-hydrofoil of a water current turbine by means the finite elements method (FEM), using a Serial/Parallel mixing theory (Rastellini et al. Comput. Struct. 86:879-896, 2008, Martinez et al., 2007, Martinez and Oller Arch. Comput. Methods. 16(4):357-397, 2009, Martinez et al. Compos. Part B Eng. 42(2011):134-144, 2010) coupled with a fluid-dynamic formulation and multi-objective optimization algorithm (Gen and Cheng 1997, Lee et al. Compos. Struct. 99:181-192, 2013, Lee et al. Compos. Struct. 94(3):1087-1096, 2012). The composite hydrofoil of the turbine rotor has been design using a reinforced laminate composites, taking into account the optimization of the carbon fiber orientation to obtain the maximum strength and lower rotational-inertia. Also, these results have been compared with a steel hydrofoil remarking the different performance on both structures. The mechanical and geometrical parameters involved in the design of this fiber-reinforced composite material are the fiber orientation, number of layers, stacking sequence and laminate thickness. Water pressure in the rotor of the turbine is obtained from a coupled fluid-dynamic simulation (CFD), whose detail can be found in the reference Oller et al. (2012). The main purpose of this paper is to achieve a very low inertia rotor minimizing the start-stop effect, because it is applied in axial water flow turbine currently in design by the authors, in which is important to take the maximum advantage of the kinetic energy. The FEM simulation codes are engineered by CIMNE (International Center for Numerical Method in Engineering, Barcelona, Spain), COMPack for the solids problem application, KRATOS for fluid dynamic application and RMOP for the structural optimization. To validate the procedure here presented, many turbine rotors made of composite materials are analyzed and three of them are compared with the steel one.

Improvements on computerized procedure system of advanced power reactor 1400 MWe

International Nuclear Information System (INIS)

Seong, Nokyu; Jung, Yeonsub; Sung, Chanho; Kang, Sungkon

2017-01-01

Plant procedures are instructions to help operator in monitoring, decision making, and controlling Nuclear Power Plants (NPPs). While plant procedures conventionally have been paper-based, computerized-based procedures are being implemented to reduce the drawbacks of paper-based procedures in many nuclear power plants. The Computerized Procedure System (CPS) designed by Korea Hydro and Nuclear Power Central Research Institute (KHNP CRI) is one of the human-system interfaces (HSIs) in digitalized Main Control Room (MCR) of APR1400 (Advanced Power Reactor 1400 MWe). Currently, CPS is being applied to constructing nuclear power plants of Korea and Barakah NPP 1, 2, 3 and 4 units of United Arab Emirates. The CPS has many advantages to perform the procedure in fully digitalized MCR. First, CPS provides the procedure flow with logic diagram to operators. The operator easily can be aware of the procedure flow from a previous instruction to the next instruction and also can find out the relation between parent instruction and child instructions such as AND, OR and SEQUENCE logics. Second, CPS has three logic-based functions such as procedure entry condition monitoring logic, continuously applied step (CAS) re-execution monitoring logic and auto evaluation logic on instructions. E.g. CPS provides the standard post trip actions procedure open popup message when the reactor trips by calculating the entry condition logic that procedure writer had made in the writing process. Third, CPS can directly display the task information related to instructions such as valves, pumps, process parameters, etc. and also the operator can call the system display related to procedure execution. If an operator clicks the system display link, the related system display popups on the right side monitor of CPS display. Lastly, CPS supports the synchronization of procedure among the operators. This synchronization function helps operators to succeed the goal of procedure and improve the situation

Probabilistic Design of Offshore Structural Systems

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard

1988-01-01

Probabilistic design of structural systems is considered in this paper. The reliability is estimated using first-order reliability methods (FORM). The design problem is formulated as the optimization problem to minimize a given cost function such that the reliability of the single elements...... satisfies given requirements or such that the systems reliability satisfies a given requirement. Based on a sensitivity analysis optimization procedures to solve the optimization problems are presented. Two of these procedures solve the system reliability-based optimization problem sequentially using quasi......-analytical derivatives. Finally an example of probabilistic design of an offshore structure is considered....

Probabilistic Design of Offshore Structural Systems

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard

Probabilistic design of structural systems is considered in this paper. The reliability is estimated using first-order reliability methods (FORM). The design problem is formulated as the optimization problem to minimize a given cost function such that the reliability of the single elements...... satisfies given requirements or such that the systems reliability satisfies a given requirement. Based on a sensitivity analysis optimization procedures to solve the optimization problems are presented. Two of these procedures solve the system reliability-based optimization problem sequentially using quasi......-analytical derivatives. Finally an example of probabilistic design of an offshore structure is considered....

Military Publications, Index of Test Operations Procedures

Science.gov (United States)

1981-10-01

serial number, aad design information for majur components. Prescribes vehicle, major component, and system descrip- tive elements required; such as...mount operating characteristics. Discusses preparation for test, instrumentation, and facil- ities. Describes procedures for force measurement, carriage...backlash and accuracy, turret friction, gun balance, manual handcrank force , manual response ratio, weapon and sighting system backlash, power controller

Proposal evaluation tool of standards and procedures for breast cancer in the province of Cienfuegos

International Nuclear Information System (INIS)

Fraga Suarez, Omayda; Sabates Llerandi, Teresita; Arnot Silvera, Rogelio; Torres Aja, Lidia

2009-01-01

Breast cancer is one of the most frequent malignancies Although Cuba and be a program with rules and procedures established a high number of women will die from cause. Objectives, design an instrument to assess compliance with the rules and procedures of breast cancer in Cienfuegos Province. Methodological design, a study was conducted descriptive, during the time period from January 2007 to January 2008, whose study group consisted of 55 women diagnosed with breast cancer at the 'Hospital Universitario Dr. Gustavo Lima Aldereguia' of Cienfuegos, the research was divided into three stages: general characterization, design of an assessment tool, criterion validation by external evaluators. Methods were used theoretical, empirical and mathematical statistics. Results, the stadiums most representative were II and III, there are delays in the performance definitive surgery, radical surgical treatments prevail, delays in the initiation of chemotherapy. Findings, there difficulties in adherence and compliance and therapeutic procedures established in the province of Cienfuegos, by which an instrument was designed for evaluation. (Author)

Proposed Design Procedure of a Helical Coil Heat Exchanger for an Orc Energy Recovery System for Vehicular Application

Directory of Open Access Journals (Sweden)

Giacomo Bonafoni

2015-05-01

Full Text Available There are several systems that produce energy from low grade heat sources such as Stirling engines, thermoelectric generators, and ORC (Organic Rankine Cycle systems. This paper shows the heat recovery from exhaust gases of a 1400 cc Diesel engine, to vaporize the working fluid of a small (<10 kW ORC system. The main objective is to have a system as compact as possible, to make it suitable for transport applications such as cars, ships, trains, etc. Three fluids were studied for this application: water and two refrigerant fluids: R134a and R245fa, which were found to be more appropriate than water at certain pressure and temperature values. Afterwards, a design procedure was proposed, then the heat exchanger was modeled and finally a steady-state thermal and structural analysis were carried out using a commercial software to find the temperature and the effects of the thermal stress on the material of the helical coiled tube.

Integrated aerodynamic-structural design of a forward-swept transport wing

Science.gov (United States)

Haftka, Raphael T.; Grossman, Bernard; Kao, Pi-Jen; Polen, David M.; Sobieszczanski-Sobieski, Jaroslaw

1989-01-01

The introduction of composite materials is having a profound effect on aircraft design. Since these materials permit the designer to tailor material properties to improve structural, aerodynamic and acoustic performance, they require an integrated multidisciplinary design process. Futhermore, because of the complexity of the design process, numerical optimization methods are required. The utilization of integrated multidisciplinary design procedures for improving aircraft design is not currently feasible because of software coordination problems and the enormous computational burden. Even with the expected rapid growth of supercomputers and parallel architectures, these tasks will not be practical without the development of efficient methods for cross-disciplinary sensitivities and efficient optimization procedures. The present research is part of an on-going effort which is focused on the processes of simultaneous aerodynamic and structural wing design as a prototype for design integration. A sequence of integrated wing design procedures has been developed in order to investigate various aspects of the design process.

Chapter 8: Design and Control of Voltage Source Converters With LCL-Filters

DEFF Research Database (Denmark)

Pena-Alzola, Rafael; Blaabjerg, Frede

2018-01-01

presents many options for the LCL-filter design, passive damping design, and active damping design, and this chapter will present well-known practical methods. In this chapter, the LCL-filter design uses a step-by-step procedure with simple formulas that avoid trial-and-error iterations. Different......-type procedures result in a robust design against line inductance variations. The capacitor-current feedback method requires an additional sensor and the lead-lag network avoid additional sensors by using the capacitor voltage also for synchronization. The filter-based procedure presented in the chapter uses...

Development of the ITER Continuous External Rogowski: From conceptual design to final design

Energy Technology Data Exchange (ETDEWEB)

Moreau, Philippe, E-mail: philippe.jacques.moreau@cea.fr [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Spuig, Pascal; Le-luyer, Alain; Malard, Philippe; Cantone, Bruno; Pastor, Patrick; Saint-Laurent, François [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Vayakis, George; Delhom, Dominique [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Arshad, Shakeib [Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain); Lister, Jonathan; Toussaint, Matthieu; Marmillod, Philippe; Testa, Duccio; Schlatter, Christian [Ecole polytechnique fédérale de Lausanne, Centre de Recherches en Physique des Plasmas, 1015 Lausanne (Switzerland); Peruzzo, Simone [Consorzio RFX, C.so Stati Uniti 4, 35127 Padova (Italy)

2015-10-15

Highlights: • ITER Continuous External Rogowskis are designed for plasma current measurement. • CER are located in the casing of Toroidal Field Coils and will operate at 4.5 K. • The design of the sensors has been completed and validated through prototypes. • Detailed assembly procedure inside the toroidal field coil casing has been defined. • The CER has passed all the ITER and F4E design review procedures. - Abstract: In ITER, an accurate measurement of plasma current, with high reliability, is mandatory as this parameter is used to demonstrate licensing compliance with regulatory limits. For that purpose, several independent measurements based on magnetic diagnostics have been proposed. Rogowski coils are standard inductive sensors for current measurement in many applications. In ITER, three continuous external Rogowski coils are to be installed in the casing of the toroidal field coils. These sensors are remarkable from several points of view: overall length is about 40 m, high sensitivity needed, located in the toroidal field coil casing at 4.5 K and complex 3D routing with tight bending radius of 50 mm. Since 2005 an extensive work has been carried out to develop and analyze several design options complying with ITER specifications. Prototypes of a selected continuous external Rogowski design were built and tested successfully in terms of electrical, thermal, mechanical and vacuum characteristics. Finally a detailed assembly procedure inside the toroidal field coil casing has been defined according to the coil manufacturing and assembly constraints.

Evaluation of some resonance self-shielding procedures employed in high conversion light water reactor design

International Nuclear Information System (INIS)

Patino, N.E.; Abbate, M.J.; Sbaffoni, M.M.

1990-01-01

The procedures employed in the treatment of the resonance shielding effect have been identified as one of the causes of the large discrepancies found in the neutronic calculation of high conversion light water reactors (HCLWRs), indicating the need for a revision of the self-shielding procedures employed. In this work some well known techniques applied in HCLWR self-shielding calculations are evaluated; the study involves the comparison of methods for the generation of group constants, the analysis of the impact of considering some isotopes as infinitely diluted and the evaluation of the usual approximations utilized for the treatment of heterogeneities

Towards Verification of Operational Procedures Using Auto-Generated Diagnostic Trees

Science.gov (United States)

Kurtoglu, Tolga; Lutz, Robyn; Patterson-Hine, Ann

2009-01-01

The design, development, and operation of complex space, lunar and planetary exploration systems require the development of general procedures that describe a detailed set of instructions capturing how mission tasks are performed. For both crewed and uncrewed NASA systems, mission safety and the accomplishment of the scientific mission objectives are highly dependent on the correctness of procedures. In this paper, we describe how to use the auto-generated diagnostic trees from existing diagnostic models to improve the verification of standard operating procedures. Specifically, we introduce a systematic method, namely the Diagnostic Tree for Verification (DTV), developed with the goal of leveraging the information contained within auto-generated diagnostic trees in order to check the correctness of procedures, to streamline the procedures in terms of reducing the number of steps or use of resources in them, and to propose alternative procedural steps adaptive to changing operational conditions. The application of the DTV method to a spacecraft electrical power system shows the feasibility of the approach and its range of capabilities

Stirling engine design manual

Science.gov (United States)

Martini, W. R.

1978-01-01

This manual is intended to serve both as an introduction to Stirling engine analysis methods and as a key to the open literature on Stirling engines. Over 800 references are listed and these are cross referenced by date of publication, author and subject. Engine analysis is treated starting from elementary principles and working through cycles analysis. Analysis methodologies are classified as first, second or third order depending upon degree of complexity and probable application; first order for preliminary engine studies, second order for performance prediction and engine optimization, and third order for detailed hardware evaluation and engine research. A few comparisons between theory and experiment are made. A second order design procedure is documented step by step with calculation sheets and a worked out example to follow. Current high power engines are briefly described and a directory of companies and individuals who are active in Stirling engine development is included. Much remains to be done. Some of the more complicated and potentially very useful design procedures are now only referred to. Future support will enable a more thorough job of comparing all available design procedures against experimental data which should soon be available.

Optimized procedure for calibration and verification multileaf collimator from Elekta Synergy accelerator

International Nuclear Information System (INIS)

Castel Millan, A.; Perellezo Mazon, A.; Fernandez Ibiza, J.; Arnalte Olloquequi, M.; Armengol Martinez, S.; Rodriguez Rey, A.; Guedea Edo, F.

2011-01-01

The objective of this work is to design an optimized procedure for calibration and verification of a multileaf collimator used so as to allow the EPID and the image plate in a complementary way, using different processing systems. With this procedure we have two equivalent alternative as the same parameters obtained for the calibration of multileaf Elekta Synergy accelerator.

A Comparison of Error-Correction Procedures on Skill Acquisition during Discrete-Trial Instruction

Science.gov (United States)

Carroll, Regina A.; Joachim, Brad T.; St. Peter, Claire C.; Robinson, Nicole

2015-01-01

Previous research supports the use of a variety of error-correction procedures to facilitate skill acquisition during discrete-trial instruction. We used an adapted alternating treatments design to compare the effects of 4 commonly used error-correction procedures on skill acquisition for 2 children with attention deficit hyperactivity disorder…

AGREED-UPON PROCEDURES, PROCEDURES FOR AUDITING EUROPEAN GRANTS

Directory of Open Access Journals (Sweden)

Daniel Petru VARTEIU

2016-12-01

The audit of EU-funded projects is an audit based on agreed-upon procedures, which are established by the Managing Authority or the Intermediate Body. Agreed-upon procedures can be defined as engagements made in accordance with ISRS 4400, applicable to agreed-upon procedures, where the auditor undertakes to carry out the agreed-upon procedures and issue a report on factual findings. The report provided by the auditor does not express any assurance. It allows users to form their own opinions about the conformity of the expenses with the project budget as well as the eligibility of the expenses.

Multi-objective Optimization of Departure Procedures at Gimpo International Airport

Science.gov (United States)

Kim, Junghyun; Lim, Dongwook; Monteiro, Dylan Jonathan; Kirby, Michelle; Mavris, Dimitri

2018-04-01

Most aviation communities have increasing concerns about the environmental impacts, which are directly linked to health issues for local residents near the airport. In this study, the environmental impact of different departure procedures using the Aviation Environmental Design Tool (AEDT) was analyzed. First, actual operational data were compiled at Gimpo International Airport (March 20, 2017) from an open source. Two modifications were made in the AEDT to model the operational circumstances better and the preliminary AEDT simulations were performed according to the acquired operational procedures. Simulated noise results showed good agreements with noise measurement data at specific locations. Second, a multi-objective optimization of departure procedures was performed for the Boeing 737-800. Four design variables were selected and AEDT was linked to a variety of advanced design methods. The results showed that takeoff thrust had the greatest influence and it was found that fuel burn and noise had an inverse relationship. Two points representing each fuel burn and noise optimum on the Pareto front were parsed and run in AEDT to compare with the baseline. The results showed that the noise optimum case reduced Sound Exposure Level 80-dB noise exposure area by approximately 5% while the fuel burn optimum case reduced total fuel burn by 1% relative to the baseline for aircraft-level analysis.

Surgeon Design Interface for Patient-Specific Concentric Tube Robots.

Science.gov (United States)

Morimoto, Tania K; Greer, Joseph D; Hsieh, Michael H; Okamura, Allison M

2016-06-01

Concentric tube robots have potential for use in a wide variety of surgical procedures due to their small size, dexterity, and ability to move in highly curved paths. Unlike most existing clinical robots, the design of these robots can be developed and manufactured on a patient- and procedure-specific basis. The design of concentric tube robots typically requires significant computation and optimization, and it remains unclear how the surgeon should be involved. We propose to use a virtual reality-based design environment for surgeons to easily and intuitively visualize and design a set of concentric tube robots for a specific patient and procedure. In this paper, we describe a novel patient-specific design process in the context of the virtual reality interface. We also show a resulting concentric tube robot design, created by a pediatric urologist to access a kidney stone in a pediatric patient.

Procedure guide of design, construction of prototypes, calibration and sure operation of nucleonic control systems; Guia de procedimientos de diseno, construccion de prototipos, calibracion y operacion segura de sistemas de control nucleonico

Energy Technology Data Exchange (ETDEWEB)

Banados Perez, H [Instituto de Pesquizas Energia Nuclear, Sao Paulo (Brazil); Griffith Martinez, J [Instituto de Investigaciones de la Cana de Azucar, La Habana (Cuba); Desdin Garcia, L F [Centro de Estudios Aplicados al Desarrollo Nuclear, La Habana (Cuba); Rodriguez Cardona, R L [Agencia de Energia Nuclear, La Habana (Cuba); Molina, G [Instituto de Investigaciones Nucleares, Mexico City (Mexico); Sebastian Calvo, C [Instituto Peruano de Energia Nuclear, Lima (Peru)

1999-09-24

This Guide was elaborated in the mark of the project RLA/8/024 ARCAL XLII 'Industrial Applications of the Tracer Technology and Nucleonic Control Systems'. Its objective is to establish the approaches for the design, the construction, the selection and the procedures for the sure operation of the Nucleonic Control Systems (NCS) in the industry. The NCS is used to control processes to high speeds, materials with extreme conditions or with noxious chemical properties, susceptible materials of being damaged by contact and packed products. In this document is defined the scope of the procedure. The SCN are classified according to: type of radiations, the mobility of the components, the degree of the beams collimation; and in function of the security. The design and construction criteria of the nuclear meters and of the systems of control nucleonic are exposed.

Controller design for interval plants

International Nuclear Information System (INIS)

Al-Sunni, F.M.

2003-01-01

We make use of celebrated Kharitoniv theorem to come up with a design procedure for the stabilization of uncertain systems in the parameters using low order controllers. The proposed design is based on classical design methods. A Non-linear programming (NLP) approach for the design of higher order controllers is also presented. We present our results and give illustrating examples. (author)

Landing Gear Integration in Aircraft Conceptual Design. Revision

Science.gov (United States)

Chai, Sonny T.; Mason, William H.

1997-01-01

The design of the landing gear is one of the more fundamental aspects of aircraft design. The design and integration process encompasses numerous engineering disciplines, e.g., structure, weights, runway design, and economics, and has become extremely sophisticated in the last few decades. Although the design process is well-documented, no attempt has been made until now in the development of a design methodology that can be used within an automated environment. As a result, the process remains to be a key responsibility for the configuration designer and is largely experience-based and graphically-oriented. However, as industry and government try to incorporate multidisciplinary design optimization (MDO) methods in the conceptual design phase, the need for a more systematic procedure has become apparent. The development of an MDO-capable design methodology as described in this work is focused on providing the conceptual designer with tools to help automate the disciplinary analyses, i.e., geometry, kinematics, flotation, and weight. Documented design procedures and analyses were examined to determine their applicability, and to ensure compliance with current practices and regulations. Using the latest information as obtained from industry during initial industry survey, the analyses were in terms modified and expanded to accommodate the design criteria associated with the advanced large subsonic transports. Algorithms were then developed based on the updated analysis procedures to be incorporated into existing MDO codes.

Situation awareness and trust in computer-based procedures in nuclear power plant operations

Energy Technology Data Exchange (ETDEWEB)

Throneburg, E. B.; Jones, J. M. [AREVA NP Inc., 7207 IBM Drive, Charlotte, NC 28262 (United States)

2006-07-01

Situation awareness and trust are two issues that need to be addressed in the design of computer-based procedures for nuclear power plants. Situation awareness, in relation to computer-based procedures, concerns the operators' knowledge of the plant's state while following the procedures. Trust concerns the amount of faith that the operators put into the automated procedures, which can affect situation awareness. This paper first discusses the advantages and disadvantages of computer-based procedures. It then discusses the known aspects of situation awareness and trust as applied to computer-based procedures in nuclear power plants. An outline of a proposed experiment is then presented that includes methods of measuring situation awareness and trust so that these aspects can be analyzed for further study. (authors)

Situation awareness and trust in computer-based procedures in nuclear power plant operations

International Nuclear Information System (INIS)

Throneburg, E. B.; Jones, J. M.

2006-01-01

Situation awareness and trust are two issues that need to be addressed in the design of computer-based procedures for nuclear power plants. Situation awareness, in relation to computer-based procedures, concerns the operators' knowledge of the plant's state while following the procedures. Trust concerns the amount of faith that the operators put into the automated procedures, which can affect situation awareness. This paper first discusses the advantages and disadvantages of computer-based procedures. It then discusses the known aspects of situation awareness and trust as applied to computer-based procedures in nuclear power plants. An outline of a proposed experiment is then presented that includes methods of measuring situation awareness and trust so that these aspects can be analyzed for further study. (authors)

A procedure for estimation of pipe break probabilities due to IGSCC

International Nuclear Information System (INIS)

Bergman, M.; Brickstad, B.; Nilsson, F.

1998-06-01

A procedure has been developed for estimation of the failure probability of welds joints in nuclear piping susceptible to intergranular stress corrosion cracking. The procedure aims at a robust and rapid estimate of the failure probability for a specific weld with known stress state. Random properties are taken into account of the crack initiation rate, the initial crack length, the in-service inspection efficiency and the leak rate. A computer realization of the procedure has been developed for user friendly applications by design engineers. Some examples are considered to investigate the sensitivity of the failure probability to different input quantities. (au)

Quantization Procedures

International Nuclear Information System (INIS)

Cabrera, J. A.; Martin, R.

1976-01-01

We present in this work a review of the conventional quantization procedure, the proposed by I.E. Segal and a new quantization procedure similar to this one for use in non linear problems. We apply this quantization procedures to different potentials and we obtain the appropriate equations of motion. It is shown that for the linear case the three procedures exposed are equivalent but for the non linear cases we obtain different equations of motion and different energy spectra. (Author) 16 refs

ORNL Pocket Meter Program: internal operating procedures

International Nuclear Information System (INIS)

Berger, C.D.; Miller, J.H.; Dunsmore, M.R.

1984-12-01

The ORNL Pocket Meter Program is designed for auditing the approximate photon radiation exposure of Oak Ridge National Laboratory (ORNL) radiation workers. Although pocket meters are considered to be a secondary personnel dosimetry system at ORNL, they are valuable indicators of unplanned exposures if proper procedures are followed for testing, calibrating, deploying, wearing, processing, and recording data. 4 figures, 1 table

Mokytojų subjektyvaus sveikatos vertinimo, socialinės kompetencijos ir mokyklos baimės sąsajos

OpenAIRE

Mokusienė, Rima

2009-01-01

Tyrime dalyvavo 132 Akmenės rajono mokytojai. (94 gimnazijos mokytojai, 14 pagrindinės mokyklos mokytojų, 16 specialiosios mokyklos mokytojų, 8 muzikos mokyklos mokytojai) Visi tiriamieji - moterys, įgiję aukštąjį išsilavinimą. Tyrimo metodai - metodika socialinei kompetencijai tirti, sudaryta iš 45 teiginių (R. Ullrich ir de R. Muynck Socialinės kompetencijos testas (Vokietija, 1994) adaptavo R.Lekavičienė, 2000). Mokytojų baimės dažnumui ir raiškai nustatyti, naudotas R.Kreitschmann, B.Weid...

MMI design of K-CPS for preventing human errors and enhancing convenient operation

International Nuclear Information System (INIS)

Sung, Chan Ho; Jung, Yeon Sub; Oh, Eoung Se; Shin, Young Chul; Lee, Yong Kwan

2001-01-01

In order to supplement defects of paper procedure, reduce human errors and enhance convenient operation, computer-based procedure system is being developed. CPS (Computerized Procedure System) including human-factor engineering design concept for KNGR (Korean Next Generation Reactor) has been also developed with the same object. K-CPS(KNGR CPS) has higher level of automation than paper procedure. It is fully integrated with control and monitoring systems. Combining statements and relevant components, which changes dynamically according to plant status enhances readability of procedure. This paper shows general design criteria on computer-based procedure system, the MMI design characteristics of K-CPS and the results of suitability evaluation for K-CPS by operator

A Declarative Approach to Procedural Generation of Virtual Worlds

NARCIS (Netherlands)

Smelik, R.M.

2011-01-01

With the ever increasing costs of manual content creation for 3D virtual worlds, the potential of generating content automatically becomes too attractive to ignore. However, for most designers, procedural generation methods are complex and unintuitive to use, and offer little user control.

A declarative approach to procedural modeling of virtual worlds

NARCIS (Netherlands)

Smelik, R.M.; Tutenel, T.; Kraker, K.J.de; Bidarra, R.

2011-01-01

With the ever increasing costs of manual content creation for virtual worlds, the potential of creating it automatically becomes too attractive to ignore. However, for most designers, traditional procedural content generation methods are complex and unintuitive to use, hard to control, and generated

Procedural Content Graphs for Urban Modeling

Directory of Open Access Journals (Sweden)

Pedro Brandão Silva

2015-01-01

Full Text Available Massive procedural content creation, for example, for virtual urban environments, is a difficult, yet important challenge. While shape grammars are a popular example of effectiveness in architectural modeling, they have clear limitations regarding readability, manageability, and expressive power when addressing a variety of complex structural designs. Moreover, shape grammars aim at geometry specification and do not facilitate integration with other types of content, such as textures or light sources, which could rather accompany the generation process. We present procedural content graphs, a graph-based solution for procedural generation that addresses all these issues in a visual, flexible, and more expressive manner. Besides integrating handling of diverse types of content, this approach introduces collective entity manipulation as lists, seamlessly providing features such as advanced filtering, grouping, merging, ordering, and aggregation, essentially unavailable in shape grammars. Hereby, separated entities can be easily merged or just analyzed together in order to perform a variety of context-based decisions and operations. The advantages of this approach are illustrated via examples of tasks that are either very cumbersome or simply impossible to express with previous grammar approaches.

TRUPACT-II procedures and maintenance instructions

International Nuclear Information System (INIS)

1994-01-01

The purpose of this document is to provide the technical requirements for operation, inspection and maintenance of a TRUPACT-II Shipping Package and directly related components. This document shall supply the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP) and Certificate of Compliance (C of C) 9218. In the event there is a conflict between this document and the TRUPACT-II SARP (NRC Certificate of Compliance No. 9218), the TRUPACT-II SARP shall govern. This document details the operations, maintenance, repair, replacement of components, as well as the documentation required and the procedures to be followed to maintain the integrity of the TRUPACT-II container. These procedures may be modified for site use, but as a minimum all parameters and format listed herein must be included in any site modified version. For convenience and where applicable steps may be performed out of sequence. Packaging and payload handling equipment and transport trailers have been specifically designed for use with the TRUPACT-II Packaging. This document discusses the minimum required procedures for use of the adjustable center of gravity lift fixture and the TRUPACT-II transport trailer in conjunction with the TRUPACT-II Packaging

The effects of predictor method factors on selection outcomes: A modular approach to personnel selection procedures.

Science.gov (United States)

Lievens, Filip; Sackett, Paul R

2017-01-01

Past reviews and meta-analyses typically conceptualized and examined selection procedures as holistic entities. We draw on the product design literature to propose a modular approach as a complementary perspective to conceptualizing selection procedures. A modular approach means that a product is broken down into its key underlying components. Therefore, we start by presenting a modular framework that identifies the important measurement components of selection procedures. Next, we adopt this modular lens for reviewing the available evidence regarding each of these components in terms of affecting validity, subgroup differences, and applicant perceptions, as well as for identifying new research directions. As a complement to the historical focus on holistic selection procedures, we posit that the theoretical contributions of a modular approach include improved insight into the isolated workings of the different components underlying selection procedures and greater theoretical connectivity among different selection procedures and their literatures. We also outline how organizations can put a modular approach into operation to increase the variety in selection procedures and to enhance the flexibility in designing them. Overall, we believe that a modular perspective on selection procedures will provide the impetus for programmatic and theory-driven research on the different measurement components of selection procedures. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Intermediate/Advanced Research Design and Statistics

Science.gov (United States)

Ploutz-Snyder, Robert

2009-01-01

The purpose of this module is To provide Institutional Researchers (IRs) with an understanding of the principles of advanced research design and the intermediate/advanced statistical procedures consistent with such designs

Rational Unified Process jako metodika vývoje softwaru

OpenAIRE

Rytíř, Vladimír

2008-01-01

Cílem této práce je seznámit se s procesem vývoje softwaru dle vybraných metodik s hlavním zaměřením na metodiku Rational Unified Process od firmy IBM. Incepční a elaborační fáze této metody také aplikuji na praktickém  příkladě. Goal of my work is to introduce software development process metods specialized to Rational Unified Process metod from IBM. I aplicate inception and elaboration phases of RUP on practical example. B

Augalininkystės produkcijos savikainos skaičiavimo metodika

OpenAIRE

Dereškaitė, Rima

2005-01-01

Research object – agricultural enterprises. Research subject – methodics of plant production cost calculation. Research aim – to analyze references and practical methods employed in plant produce cost calculation and to propose methodics improvements of plant production cost calculation. Objectives: 1) to analyze the essence of expenditure and production cost; 5) to examine the structure of production cost and to substantiate the expedience of expenditure calculation into cost; 6) to study me...

Test procedures, AN/AIC-27 system and component units. [for space shuttle

Science.gov (United States)

Reiff, F. H.

1975-01-01

The AN/AIC-27 (v) intercommunication system is a 30-channel audio distribution which consists of: air crew station units, maintenance station units, and a central control unit. A test procedure for each of the above units and also a test procedure for the system are presented. The intent of the test is to provide data for use in shuttle audio subsystem design.

Conceptual design of main coolant pump for integral reactor SMART

Energy Technology Data Exchange (ETDEWEB)

Park, Jin Seok; Kim, Jong In; Kim, Min Hwan [Korea Atomic Energy Research Institute, Taejon (Korea)

1999-12-01

The conceptual design for MCP to be installed in the integral reactor SMART was carried out. Canned motor pump was adopted in the conceptual design of MCP. Three-dimensional modeling was performed to visualize the conceptual design of the MCP and to check interferences between the parts. The theoretical design procedure for the impeller was developed. The procedures for the flow field and structural analysis of impeller was also developed to assess the design validity and to verify its structural integrity. A computer program to analyze the dynamic characteristics of the rotor shaft of MCP was developed. The rotational speed sensor was designed and its performance test was conducted to verify the possibility of operation. A prototypes of the canned motor was manufactured and tested to confirm the validity of the design concept. The MCP design concept was also investigated for fabricability by establishing the manufacturing procedures. 41 refs., 96 figs., 10 tabs. (Author)

Axial Turbine Aerodynamic Design of Small Heavy-Duty Gas Turbines

International Nuclear Information System (INIS)

Kim, Joung Seok; Lee, Wu Sang; Ryu, Je Wook

2013-01-01

This study describes the aerodynamic design procedure for the axial turbines of a small heavy-duty gas turbine engine being developed by Docosan Heavy Industries. The design procedure mainly consists of three parts: namely, flow path design, airfoil design, and 3a performance calculation. To design the optimized flow path, through flow calculations as well as the loss estimation are widely used to evaluate the effect of geometric variables, for example, shape of meridional plane, mean radius, blades axial gap, and had angle. During the airfoil design procedure, the optimum number of blades is calculated by empirical correlations based on the in/outlet flow angles, and then 2a airfoil planar sections are designed carefully, followed by 2a B2 NS calculations. The designed planar sections are stacked along the span wise direction, leading to a 3a surfaced airfoil shape. To consider the 3a effect on turbine performance, 3a multistage Euler calculation, single row, and multistage NS calculations are performed

PWR core design calculations

International Nuclear Information System (INIS)

Trkov, A.; Ravnik, M.; Zeleznik, N.

1992-01-01

Functional description of the programme package Cord-2 for PWR core design calculations is presented. Programme package is briefly described. Use of the package and calculational procedures for typical core design problems are treated. Comparison of main results with experimental values is presented as part of the verification process. (author) [sl

Optimal training design for procedural motor skills: a review and application to laparoscopic surgery

NARCIS (Netherlands)

Spruit, E.N.; Band, G.P.H.; Hamming, J.F.; Ridderinkhof, K.R.

2014-01-01

This literature review covers the choices to consider in training complex procedural, perceptual and motor skills. In particular, we focus on laparoscopic surgery. An overview is provided of important training factors modulating the acquisition, durability, transfer, and efficiency of trained

Software For Computer-Aided Design Of Control Systems

Science.gov (United States)

Wette, Matthew

1994-01-01

Computer Aided Engineering System (CAESY) software developed to provide means to evaluate methods for dealing with users' needs in computer-aided design of control systems. Interpreter program for performing engineering calculations. Incorporates features of both Ada and MATLAB. Designed to be flexible and powerful. Includes internally defined functions, procedures and provides for definition of functions and procedures by user. Written in C language.

Collect Available Creep-Fatigue Data and Study Existing Creep-Fatigue Evaluation Procedures for Grade 91 and Hastelloy XR

International Nuclear Information System (INIS)

Asayama, Tai; Tachibana, Yukio

2007-01-01

This report describes the results of investigation on Task 5 of DOE/ASME Materials Project based on a contract between ASME Standards Technology, LLC (ASME ST-LLC) and Japan Atomic Energy Agency (JAEA). Task 5 is to collect available creep-fatigue data and study existing creep-fatigue evaluation procedures for Grade 91 steel and Hastelloy XR. Part I of this report is devoted to Grade 91 steel. Existing creep-fatigue data were collected (Appendix A) and analyzed from the viewpoints of establishing a creep-fatigue procedure for VHTR design. A fair amount of creep-fatigue data has been obtained and creep-fatigue phenomena have been clarified to develop design standards mainly for fast breeder reactors. Following this, existing creep-fatigue procedures were studied and it was clarified that the creep-fatigue evaluation procedure of the ASME-NH has a lot of conservatisms and they were analyzed in detail from the viewpoints of the evaluation of creep damage of material. Based on the above studies, suggestions to improve the ASME-NH procedure along with necessary research and development items were presented. Part II of this report is devoted to Hastelloy XR. Existing creep-fatigue data used for development of the high temperature structural design guideline for High Temperature Gas-cooled Reactor (HTGR) were collected. Creep-fatigue evaluation procedure in the design guideline and its application to design of the intermediate heat exchanger (IHX) for High Temperature Engineering Test Reactor (HTTR) was described. Finally, some necessary research and development items in relation to creep-fatigue evaluation for Gen IV and VHTR reactors were presented.

A new design approach to innovative spectrometers. Case study: TROPOLITE

Science.gov (United States)

Volatier, Jean-Baptiste; Baümer, Stefan; Kruizinga, Bob; Vink, Rob

2014-05-01

Designing a novel optical system is a nested iterative process. The optimization loop, from a starting point to final system is already mostly automated. However this loop is part of a wider loop which is not. This wider loop starts with an optical specification and ends with a manufacturability assessment. When designing a new spectrometer with emphasis on weight and cost, numerous iterations between the optical- and mechanical designer are inevitable. The optical designer must then be able to reliably produce optical designs based on new input gained from multidisciplinary studies. This paper presents a procedure that can automatically generate new starting points based on any kind of input or new constraint that might arise. These starting points can then be handed over to a generic optimization routine to make the design tasks extremely efficient. The optical designer job is then not to design optical systems, but to meta-design a procedure that produces optical systems paving the way for system level optimization. We present here this procedure and its application to the design of TROPOLITE a lightweight push broom imaging spectrometer.

Integrated System Validation Usability Questionnaire: Computerized Procedures

International Nuclear Information System (INIS)

Garcés, Ma. I.; Torralba, B.

2015-01-01

The Research and Development (R&D) project on “Theoretical and Methodological Approaches to Integrated System Validation of Control Rooms, 2014-2015”, in which the research activities described in this report are framed, has two main objectives: to develop the items for an usability methodology conceived as a part of the measurement framework for performance-based control room evaluation that the OECD Halden Reactor Project will test in the experiments planned for 2015; and the statistical analysis of the data generated in the experimental activities of the Halden Man-Machine Laboratory (HAMMLAB) facility, with previous usability questionnaires, in 2010 and 2011. In this report, the procedure designed to meet the first goal of the project is described, in particular, the process followed to identify the items related to operating procedures, both computer and paper-based, one of the elements to be included in the usability questionnaire. Three phases are performed, in the first one, the approaches developed by the United States Nuclear Regulatory Commission, NRC, are reviewed, the models used by the nuclear industry and their technical support organizations, mainly, the Electric Power Research Institute, EPRI, are analyzed, and scientist advances are also explored. In the remaining stages, general and specific guidelines for computerized and paper-based procedures are compared and criteria for the preliminary selection of the items that should be incorporated into the usability questionnaire are defined. This proposal will be reviewed and adapted by the Halden Reactor Project to the design of the specific experiments performed in HAMLAB.

Managing nuclear projects: a design agency experience in the design-build of waste management facilities in Canada

International Nuclear Information System (INIS)

Brewer, R.; Calzolari, L.

2006-01-01

Quality Assurance guarantees the quality of a product; it does not guarantee that it is a quality product. As procedures develop to satisfy QA programs and regulatory needs it is necessary to find ways to ensure that procedural management reinforces project management and does not detract from it. CANATOM NPM's experience in bidding for and executing the design or design and construction of nuclear waste management facilities demonstrates how design excellence and innovation can still be achieved while successfully managing the challenge of technical administration. The sourcing of expertise, the intricacies of design definition and the coordinating efforts required in the execution of the projects (one fully completed, the other into its engineering phase) will provide a valuable insight into the role and activities of an engineering company engaged in a 'Design Agency' (DA) role. (author)

A Comparative Analysis of the Procedure Employed in Item ...

African Journals Online (AJOL)

Zimbabwe Journal of Educational Research ... and psychological scales designed to measure constructs in education and social sciences were purposively selected for the study based on accessibility and availability of validation information. The instruments used for the study were scaling procedures used in 27 published ...

Critical Emergency Medicine Procedural Skills: A Comparative Study of Methods for Teaching and Assessment.

Science.gov (United States)

Chapman, Dane M.; And Others

Three critical procedural skills in emergency medicine were evaluated using three assessment modalities--written, computer, and animal model. The effects of computer practice and previous procedure experience on skill competence were also examined in an experimental sequential assessment design. Subjects were six medical students, six residents,…

Using plant procedures as the basis for conducting a job and task analysis

International Nuclear Information System (INIS)

Haynes, F.H.; Ruth, B.W.

1985-01-01

Plant procedures were selected, by Northeast Utilities (NU), as the basis for conducting Job and Task Analyses (JTA). The resultant JTA was used to design procedure based simulator training programs for Millstone 1, 2, and Connecticut Yankee. The task listings were both plant specific and exhibited excellent correlation to INPO's generic PWR and BWR task analyses. Using the procedures based method enabled us to perform the JTA using plant and training staff. This proved cost effective in terms of both time and money. Learning objectives developed from the JTA were easily justified and correlated directly to job performance within the context of the plant procedures. In addition, the analysis generated a comprehensive review of plant procedures and, conversely, the plant's normal procedure revision process generated an automatic trigger for updating the task data

Eye dose to staff involved in interventional and procedural fluoroscopy

International Nuclear Information System (INIS)

McLean, D; Hadaya, D; Tse, J

2016-01-01

In 2011 the International Commission on Radiological Protection (ICRP) lowered the occupational eye dose limit from 150 to 20 mSv/yr [1]. While international jurisdictions are in a process of adopting these substantial changes, medical physicists at the clinical level have been advising medical colleagues on specific situations based on dose measurements. Commissioned and calibrated TLDs mounted in commercially available holders designed to simulate the measurement of Hp(3), were applied to staff involved in x-ray procedures for a one month period. During this period clinical procedure data was concurrently collected and subject to audit. The use or not of eye personal protective equipment (PPE) was noted for all staff. Audits were conducted in the cardiac catheterisation laboratory, the interventional angiography rooms and the procedural room where endoscopic retrograde cholangiopancreatography (ERCP) procedures are performed. Significant levels of occupational dose were recorded in the cardiac and interventional procedures, with maximum reading exceeding the new limit for some interventional radiologists. No significant eye doses were measured for staff performing ERCP procedures. One outcome of the studies was increased use of eye PPE for operators of interventional equipment with increased availability also to nursing staff, when standing in close proximity to the patient during procedures. (paper)

Two-stage dental implants inserted in a one-stage procedure : a prospective comparative clinical study

NARCIS (Netherlands)

Heijdenrijk, Kees

2002-01-01

The results of this study indicate that dental implants designed for a submerged implantation procedure can be used in a single-stage procedure and may be as predictable as one-stage implants. Although one-stage implant systems and two-stage.

EUS-Guided Vascular Procedures: A Literature Review

Directory of Open Access Journals (Sweden)

Tomislav Bokun

2013-01-01

Full Text Available Endoscopic ultrasound (EUS is continuously stepping into the therapeutic arena, simultaneously evolving in different directions, such as the management of pancreatic and biliary diseases, celiac neurolysis, delivering local intratumoral therapy, and EUS-guided endosurgery. EUS-guided vascular procedures are also challenging, considering the variety of vascular pathology, proximity of the vascular structures to the GI tract wall, high resolution, and real-time guidance offering an attractive access route and precise delivery of the intervention. The literature on vascular therapeutic EUS demonstrates techniques for the management of upper GI variceal and nonvariceal bleeding, pseudoaneurysms, and coiling and embolization procedures, as well as the creation of intrahepatic portosystemic shunts. The paucity of studies, diversity of study designs, and the number of animal model studies hamper a systematic approach to the conclusion and decision making important to clinicians and healthcare policy makers. Nevertheless, theoretical benefits and findings up to date concerning technical feasibility, efficacy, and safety of the procedures drive further research and development in this rather young therapeutic arena.

Modal-pushover-based ground-motion scaling procedure

Science.gov (United States)

Kalkan, Erol; Chopra, Anil K.

2011-01-01

Earthquake engineering is increasingly using nonlinear response history analysis (RHA) to demonstrate the performance of structures. This rigorous method of analysis requires selection and scaling of ground motions appropriate to design hazard levels. This paper presents a modal-pushover-based scaling (MPS) procedure to scale ground motions for use in a nonlinear RHA of buildings. In the MPS method, the ground motions are scaled to match to a specified tolerance, a target value of the inelastic deformation of the first-mode inelastic single-degree-of-freedom (SDF) system whose properties are determined by the first-mode pushover analysis. Appropriate for first-mode dominated structures, this approach is extended for structures with significant contributions of higher modes by considering elastic deformation of second-mode SDF systems in selecting a subset of the scaled ground motions. Based on results presented for three actual buildings-4, 6, and 13-story-the accuracy and efficiency of the MPS procedure are established and its superiority over the ASCE/SEI 7-05 scaling procedure is demonstrated.

Application of Factorial Designs and Simplex Optimisation in the Development of Flow Injection-Hydride Generation-Graphite Furnace Atomic Absorption Spectrometry Procedures as Demonstrated for the Determination of Trace Levels of Germanium

DEFF Research Database (Denmark)

Hilligsøe, Bo; Hansen, Elo Harald

1997-01-01

The optimisation of a volume-based FI-HG-GFAAS procedure is described for the trace determination of Ge, comprising in situ collection of the generated germane in the graphite furnace. The response function is the peak area readout (A*s). Based on a preliminary study, where factorial designs were...

The Development of CPSES Plug-in(CPMP) for APR1400 Computerized Procedure Effective Maintenance

Energy Technology Data Exchange (ETDEWEB)

Seong, No Kyu; Park, Jin Kyun; Jung, Yeon Sub [KHNP Central Research Institute, Daejeon (Korea, Republic of)

2014-10-15

The Computerized Procedure System (CPS) is one of the Man Machine Interface (MMI) resources of the Shin-Kori 3 and 4 nuclear power plants. The CPS is a computerized operator support system that enables operating crew to execute procedures in an accurate and fast manner. The Computerized Procedure (CP) is the XML data file in executable format that can be installed in the Procedure eXecution System (PXS) for execution. The CP contains specific information related to a particular procedure (i.e. LOCA). These computerized procedures such as Alarm Response Procedures (ARP) are separated into individual alarm procedure to maximize function interface between CPS and DCS. E.g. 'Procedure open by alarm list'. The procedure writer's burden to manage many procedures has been increased because of separated procedures. This paper introduces Computerized Procedure System Engineering System (CPSES) plug-in that is computerized procedure management program (CPMP) to reduce procedure writer's burden. This paper introduces the main features of CPMP. CPMP reduces procedure writer's or CPX maintainer's burden. This program is implemented and tested by program design requirement.

Design of the measurements validation procedure and the expert system architecture for a cogeneration internal combustion engine

International Nuclear Information System (INIS)

Barelli, L.; Bidini, G.

2005-01-01

A research activity has been initiated to study the development of a diagnostic methodology, for the optimization of energy efficiency and the maximization of the operational time in those conditions, based on artificial intelligence (AI) techniques such as artificial neural network (ANN) and fuzzy logic. The diagnostic procedure, developed specifically for the cogeneration plant located at the Engineering Department of the University of Perugia, must be characterized by a modular architecture to obtain a flexible architecture applicable to different systems. The first part of the study deals with the identifying the principal modules and the corresponding variables necessary to evaluate the module 'health state'. Also the consequent upgrade of the monitoring system is described in this paper. Moreover it describes the structure proposed for the diagnostic procedure, consisting of a procedure for measurement validation and a fuzzy logic-based inference system. The first reveals the presence of abnormal conditions and localizes their source distinguishing between system failure and instrumentation malfunctions. The second provides an evaluation of module health state and the classification of the failures which have possibly occurred. The procedure was implemented in C++

Design and analysis of PCRV core cavity closure

International Nuclear Information System (INIS)

Lee, T.T.; Schwartz, A.A.; Koopman, D.C.A.

1980-05-01

Design requirements and considerations for a core cavity closure which led to the choice of a concrete closure with a toggle hold-down as the design for the Gas-Cooled Fast Breeder Reactor (GCFR) plant are discussed. A procedure for preliminary stress analysis of the closure by means of a three-dimensional finite element method is described. A limited parametric study using this procedure indicates the adequacy of the present closure design and the significance of radial compression developed as a result of inclined support reaction

Diesel generator trailer acceptance test procedure

International Nuclear Information System (INIS)

Kostelnik, A.J.

1994-01-01

This Acceptance Test Procedure (ATP) will document compliance with the requirements of WHC-S-0252 Rev. 1 and ECNs 609271, and 609272. The equipment being tested is a 150KW Diesel Generator mounted on a trailer with switchgear. The unit was purchased as a Design and Fabrication procurement activity. The ATP was written by the Seller and will be performed by the Seller with representatives of the Westinghouse Hanford Company witnessing the test at the Seller's location

Closed and Open Design Projects in the Education of Engineers

DEFF Research Database (Denmark)

Franksen, Ole Immanuel

1965-01-01

The two aspects of engineering education are the teaching of science and the teaching of design. By ``design'' is meant the procedure of selecting and combining distinct elements to create complete systems which will perform useful functions. In this paper, the author describes the application of...... of this concept of design teaching at The Technical University of Denmark, after a procedure which includes a sequence of closed and open design projects in both computational and experimental laboratories...

14 CFR 21.31 - Type design.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Type design. 21.31 Section 21.31... PROCEDURES FOR PRODUCTS AND PARTS Type Certificates § 21.31 Type design. The type design consists of— (a) The... configuration and the design features of the product shown to comply with the requirements of that part of this...

In-Office Endoscopic Laryngeal Laser Procedures: A Patient Safety Initiative.

Science.gov (United States)

Anderson, Jennifer; Bensoussan, Yael; Townsley, Richard; Kell, Erika

2018-05-01

Objective To review complications of in-office endoscopic laryngeal laser procedures after implementation of standardized safety protocol. Methods A retrospective review was conducted of the first 2 years of in-office laser procedures at St Michaels Hospital after the introduction of a standardized safety protocol. The protocol included patient screening, procedure checklist with standardized reporting of processes, medications, and complications. Primary outcomes measured were complication rates of in-office laryngeal laser procedures. Secondary outcomes included hemodynamic changes, local anesthetic dose, laser settings, total laser/procedure time, and incidence of sedation. Results A total of 145 in-office KTP procedures performed on 65 patients were reviewed. In 98% of cases, the safety protocol was fully implemented. The overall complication rate was 4.8%. No major complications were encountered. Minor complications included vasovagal episodes and patient intolerance. The rate of patient intolerance resulting early termination of anticipated procedure was 13.1%. Total local anesthetic dose averaged 172.9 mg lidocaine per procedure. The mean amount of laser energy dispersed was 261.2 J, with mean total procedure time of 48.3 minutes. Sixteen percent of patients had preprocedure sedation. Vital signs were found to vary modestly. Systolic blood pressure was lower postprocedure in 13.8% and symptomatic in 4.1%. Discussion The review of our standardized safety protocol has revealed that in-office laser treatment for laryngeal pathology has extremely low complication rates with safe patient outcomes. Implications for Practice The trend of shifting procedures out of the operating room into the office/clinic setting requires new processes designed to promote patient safety.

Survey procedure: Control and accountability of nuclear materials

International Nuclear Information System (INIS)

Van Ness, H.

1987-02-01

This procedure outlines the method by which the Department of Energy (DOE) San Francisco Operations Office (SAN) will plan and execute periodic field surveys of the Material Control and Accountability (MC and A) program and practices at designated contractors' facilities. The surveys will be conducted in accordance with DOE Order 5630.7, Control and Accountability of Nuclear Materials Surveys (7/8/81) to ascertain compliance with applicable DOE Orders and SAN Management Directives in the 5630 series, as well as the adequacy of the contractor's program and procedures. Surveys will be conducted by the Safeguards and Security Division of DOE-SAN. The survey team will review and evaluate the adequacy of the contractor's procedures and practices for nuclear material control and accounting by means of physical inventory, internal control, measurement and statistics, material control indicators, records and reports, and personnel training. The survey will include an audit of records and reports, observation of inventory procedures, an independent test of the inventory and a review and evaluation of the inventory differences, accidental losses, and normal operational losses as applicable to the facility to be surveyed

Optimum transformer design for a pulsed power system

International Nuclear Information System (INIS)

Broverman, A.Y.

1987-11-01

Electromagnetic forces resulting from peak pulsed current require special design consideration to prevent failure of the coils of the transformer. Procedures for interleaving transformer windings to reduce both electromagnetic short-circuit forces and reactive voltage drop while reducing procurement costs are described. The basics of transformer design principles and cost trade-offs are included to enhance understanding of the interleaving procedures. 3 refs., 3 figs

Design interface management system for nuclear power plant project

International Nuclear Information System (INIS)

Wang Jun

2012-01-01

Design interfaces exist between different participants and during the whole course of a nuclear power project, and include different disciplinary requirements. The purpose of interface management is to establish a procedure, which can be efficiently used to control the complex design interfaces and ensure its compliance with NPP design requirements. To this end, a complete work procedures and relationship will be defined and classified, so as to set up the structure of interface management system. The system consists of three levels, i.e. working procedure level, management tool level and technical document level. Two management routes, i.e. administration route and technical route, are adopted so as to conduct management efficiently. (author)

MITG test assembly design and fabrication

International Nuclear Information System (INIS)

Schock, A.

1983-01-01

The design, analysis, and evaluation of the Modular Isotopic Thermoelectric Generator (MITG), described in an earlier paper, led to a program to build and test prototypical, modules of that generator. Each test module duplicates the thermoelectric converters, thermal insulation, housing and radiator fins of a typical generator slice, and simulates its isotope heat source module by means of an electrical heater encased in a prototypical graphite box. Once the approx. 20-watt MITG module has been developed, it can be assembled in appropriate number to form a generator design yielding the desired power output. The present paper describes the design and fabrication of the MITG test assembly, which confirmed the fabricability of the multicouples and interleaved multifoil insulation called for by the design. Test plans, procedures, instrumentation, results, and post-test analyses, as well as revised designs, fabrication procedures, and performance estimates, are described in subsequent papers in these proceedings

Project W-320, operational test procedure OTP-320-003 test report

International Nuclear Information System (INIS)

Bevins, R.R.

1998-01-01

This report documents and summarizes the results of OTP-320-003 Project W-320 Operational Testing of the WRSS Supernate Transfer System. Project W-320 Operational Test OTP-320-003 was performed to verify components of the Waste Retrieval Sluicing System (WRSS) supernate transfer system functioned as designed following construction completion and turnover to operations. All equipment operation was performed by Tank Farms Operations personnel following the operational test procedure and referenced operating procedures. Supernate Transfer line Flushing System Testing was completed over the course of approximately 4 weeks as tank farm conditions and configuration, equipment availability, and operations resources allowed. All testing was performed with the 702-AZ ventilation system and the 296-P-16 ventilation systems in operation. Test procedure OTP-320-003 required two revisions during testing to incorporate Procedure Changes Authorizations (PCAs) necessary to facilitate testing. Various sections of testing are documented on each procedure revision. The completed test procedure is included as Attachment A. Exception Reports generated during the course of testing are included as Attachment B

Exploring Holistic Comfort in Children Who Experience a Clinical Venipuncture Procedure.

Science.gov (United States)

Bice, April A; Hall, Joanne; Devereaux, Matthew J

2018-06-01

Children often experience the uncomfortable effects of invasive procedures as a part of primary care and during times of illness. Holistic comfort has been well documented in adult literature but little research exists on the understanding of holistic procedural comfort from the child's perspective. In this study, holistic comfort related to an invasive venipuncture procedure was explored in children age 5 to 7 years and their caregivers of all ages. A qualitative descriptive design described by Sandelowski was used. The philosophical underpinnings of naturalistic inquiry of Guba and Lincoln were used. Semistructured interviews were conducted with 13 child and 15 caregiver participants. Children also drew pictures to help describe their perceptions. Traditional thematic content analysis described by Hsieh and Shannon yielded four overarching themes of holistic comfort related to venipuncture procedures in children: Body Comfort, Cognitive and Emotional Comfort, Comfort in the Procedure Surroundings, and Comfort Play. Numerous recommendations for future research are included. Implications for nursing and related health sciences, organizational and administrative policy, invasive procedures, theory, and methods were found and are discussed. Findings from this study will assist nurses in providing procedure management for children from a holistic care perspective.

Radiology of non-spinal pain procedures. A guide for the interventionalist

International Nuclear Information System (INIS)

Syed, Mubin I.; Shaikh, Azin

2011-01-01

Most interventionalists are not radiologists and most radiologists do not understand interventional pain procedures. Nevertheless, interventionalists order extensive diagnostic imaging in the workup prior to any intervention. Against this background, this handy, well-illustrated manual has been designed to meet the major need of interventional pain physicians to understand the radiologic imaging involved in the performance of non-spinal pain procedures. It provides information on such topics as radiologic anatomy, the radiologic manifestations of indications and contraindications to interventional procedures, and the radiologic appearance of complications that may arise from these procedures. In addition, it will be useful for the diagnostic radiologist, who may be unaware of many of the interventional pain procedures. The chosen format will ensure that the reader is quickly able to reference any given procedure. Sections are devoted to the head and neck, thorax, abdomen, pelvis, and the upper and lower extremities. As this is a guidebook, it does not encompass every single pathologic entity that may be encountered; however, the commonly performed non-spinal pain procedures are included. This text will prove essential for any interventionalist who does not have easy access to a radiologist and vice versa. (orig.)

Radiology of non-spinal pain procedures. A guide for the interventionalist

Energy Technology Data Exchange (ETDEWEB)

Syed, Mubin I. [Dayton Interventional Radiology, Dayton, OH (United States); Shaikh, Azin

2011-07-01

Most interventionalists are not radiologists and most radiologists do not understand interventional pain procedures. Nevertheless, interventionalists order extensive diagnostic imaging in the workup prior to any intervention. Against this background, this handy, well-illustrated manual has been designed to meet the major need of interventional pain physicians to understand the radiologic imaging involved in the performance of non-spinal pain procedures. It provides information on such topics as radiologic anatomy, the radiologic manifestations of indications and contraindications to interventional procedures, and the radiologic appearance of complications that may arise from these procedures. In addition, it will be useful for the diagnostic radiologist, who may be unaware of many of the interventional pain procedures. The chosen format will ensure that the reader is quickly able to reference any given procedure. Sections are devoted to the head and neck, thorax, abdomen, pelvis, and the upper and lower extremities. As this is a guidebook, it does not encompass every single pathologic entity that may be encountered; however, the commonly performed non-spinal pain procedures are included. This text will prove essential for any interventionalist who does not have easy access to a radiologist and vice versa. (orig.)

Design Education

DEFF Research Database (Denmark)

Brandt, Eva

2007-01-01

In resent years the two main design schools in Denmark (Danmarks Designskole and Designskolen Kolding ) undergo many changes. The overall goal for both is to obtain status as a university, and they will be evaluated in this regard in 2010. Transforming a vocational school with long handicraft...... traditions into a research based institution for higher education is demanding. Danmarks Designskole is in the middle of this process, many activities are initiated, both employees and students are involved, and from outside representatives from various design professions. The design process has many...... stakeholders with various interests and opinions. The aim it is not to design a computer system, a service or product but re-designing curriculum, work procedures, self images etc. which support educating designers of the future. This paper reports on two investigations that have been carried through as part...

Computerized procedures system

Science.gov (United States)

Lipner, Melvin H.; Mundy, Roger A.; Franusich, Michael D.

2010-10-12

An online data driven computerized procedures system that guides an operator through a complex process facility's operating procedures. The system monitors plant data, processes the data and then, based upon this processing, presents the status of the current procedure step and/or substep to the operator. The system supports multiple users and a single procedure definition supports several interface formats that can be tailored to the individual user. Layered security controls access privileges and revisions are version controlled. The procedures run on a server that is platform independent of the user workstations that the server interfaces with and the user interface supports diverse procedural views.

Printed circuit board designer's reference basics

CERN Document Server

Robertson, Chris

2003-01-01

PCB design instruction and reference manual, all in one book, with in- depth explanation of the processes and tools used in modern PCB design Standards, formulas, definitions, and procedures, plus software to tie it all together.

Study on computer-aided simulation procedure for multicomponent separating cascade

International Nuclear Information System (INIS)

Kinoshita, Masahiro

1982-11-01

The present report reviews the author's study on the computer-aided simulation procedure for a multicomponent separating cascade. As a conclusion, two very powerful simulation procedures have been developed for cascades composed of separating elements whose separation factors are very large. They are applicable in cases where interstage flow rates are input variables for the calculation and stage separation factors are given either as constants or as functions of compositions of the up and down streams. As an application of the new procedure, a computer-aided simulation study has been performed for hydrogen isotope separating cascades by porous membrane method. A cascade system configuration is developed and pertinent design specifications are determined in an example case of the feed conditions and separation requirements. (author)

Characteristics of Headache After an Intracranial Endovascular Procedure: A Prospective Observational Study.

Science.gov (United States)

Zhang, Linjing; Wu, Xiancong; Di, Hai; Feng, Tao; Wang, Yunxia; Wang, Jun; Cao, Xiangyu; Li, Baomin; Liu, Ruozhuo; Yu, Shengyuan

2017-03-01

Two editions of the International Classification of Headache Disorders (ICHD) diagnostic criteria for "Headache attributed to an intracranial endovascular procedure" have been published, in 2004 and 2013. 1,2 Despite studies that have suggested that the former is not very practical, the ICHD-3 beta did not contain major changes. Moreover, so far no consensus exists regarding characteristics of headache after intracranial endovascular procedure. Thus, there is a need for sound suggestions to improve the ICHD-3 beta diagnostic criteria. Using a prospective design, we identified consecutive patients with unruptured intracranial aneurysms (UIAs) with neuroendovascular treatment from January 2014 to December 2014. In total, 73 patients were enrolled, and 58 patients ultimately completed the 6-month follow-up. After the procedure, five of the 29 patients (17.2%) with pre-existing headache experienced marked worsening after the procedure, while seven of the 29 patients without prior headache developed new-onset headache post-procedurally. The headaches started within 24 hours, with a mean duration of 24-72 hours. The headaches were moderate to severe. The eligibility of these events to be considered headaches caused by neuroendovascular procedures according to the ICHD-3 beta diagnostic criteria for designation was far from ideal. Most cases of markedly worsening headaches and new-onset headaches started within 24 hours and persisted longer than that specified in the ICHD-3 beta diagnostic criteria. Moreover, considering that some items are not very practical, the ICHD-3 beta diagnostic criteria should be revised in the light of recent literature reports. © 2016 American Headache Society.

Human performance evaluation: The procedures of ultimate response guideline for nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Liu, Kang-Hung, E-mail: alvinks@iner.gov.tw [Institute of Nuclear Energy Research, Atomic Engery Council, No. 1000, Whenhua Road, Jiaan Village, Longtan Township, Taoyuan County, Taiwan (China); Hwang, Sheue-Ling, E-mail: slhwang@ie.nthu.edu.tw [Department of Industrial Engineering and Engineering Management, National Tsing Hua University, No. 101, Section 2, Kuang-Fu Road, Hsinchu, Taiwan 30013, Taiwan (China)

2014-07-01

Highlights: • This study adopts SPAR-H to evaluate HEPs in the URG procedures. • The involvement of URG procedures could reduce CDF significantly. • Upgrading the training level of staff will enhance the reliability effectively. • Aiding the plant manager in making URG decision will enhance the reliability. - Abstract: In the nuclear accident which occurred in Japan on March 11, 2011, several units of Fukushima conventional BWR experienced a total loss of power and water supply triggered by a heavy earthquake and subsequent Tsunami which were outside design models. In the past, when an accident occurred, operators in nuclear power plants (NPP) followed emergency operating procedures (EOPs) or severe accident management guidance (SAMG). However, EOP and SAMG are symptom-based procedures to cope with severe transients and accidents, depending on real-time operational parameters. Ultimate response guidelines (URG), a plant specific interim remedy action plan, was developed to manage accidents caused by compound disasters which exceed design models. The URG guides the plant operators’ conduct of reactor depressurization, core cooling water injection, and containment venting. This study adopts NUREG/CR-6883 (Standardized Plant Analysis Risk Human Reliability Analysis, SPAR-H) to evaluate human error probabilities (HEPs) of action and diagnosis in the current URG procedures. We found the human reliability of URG procedures analyzed by SPAR-H is about 85% (depending on different decision makers). Upgrading the training level of staff or enhancing plant managers ability to decide whether to execute URG will enhance the human reliability of URG procedures.

105-KE Basin Pilot Run design plan

International Nuclear Information System (INIS)

Sherrell, D.L.

1994-01-01

This document identifies all design deliverables and procedures applicable to the 105-KE Basin Pilot Run. It also establishes a general design strategy, defines interface control requirements, and covers planning for mechanical, electrical, instrument/control system, and equipment installation design

Single-piece maintenance procedures for the TITAN reversed-field pinch reactor

International Nuclear Information System (INIS)

Grotz, S.P.; Creedon, R.L.; Cooke, P.I.H.; Duggan, W.P.; Krakowski, R.A.; Najmabadi, F.; Wong, C.P.C.

1987-01-01

The TITAN reactor is a compact (major radius of 3.9 m and minor plasma radius of 0.6 m), high neutron wall loading (--18MW/m 2 ) fusion energy system based on the reversed-field pinch (RFP) concept. The TITAN-I fusion power core (FPC) is a lithium, self-cooled design with vanadium alloy (V-3Ti-1Si) structural material. The compact design of the TITAN fusion power core (FPC) reduces the system to a few small and relatively low mass components, making toroidal segmentation of the FPC unnecessary. A single-piece maintenance procedure in which the replaceable first wall and blanket is removed as a single unit is, therefore, possible. The TITAN FPC design provides for top access to the reactor with vertical lifts used to remove the components. The number of remote handling procedures is few and the movements are uncomplicated. The annual torus replacement requires that the reusable ohmic-heating coil set and hot-shield assembly be removed and temporarily stored in a hot cell. The used first wall and blanket assembly is drained and disconnected from the coolant supply system, then lifted to a processing room where it is cooled and prepared for Class-C waste burial. The new, pre-tested first wall and blanket assembly is then lowered into position and the removal procedure is reversed to complete the replacement process

Designing an Effective Survey

National Research Council Canada - National Science Library

Kasunic, Mark

2005-01-01

... of them. However, to protect the validity of conclusions drawn from a survey, certain procedures must be followed throughout the process of designing, developing, and distributing the survey questionnaire...

Procedure to Measure Indoor Lighting Energy Performance

Energy Technology Data Exchange (ETDEWEB)

Deru, M.; Blair, N.; Torcellini, P.

2005-10-01

This document provides standard definitions of performance metrics and methods to determine them for the energy performance of building interior lighting systems. It can be used for existing buildings and for proposed buildings. The primary users for whom these documents are intended are building energy analysts and technicians who design, install, and operate data acquisition systems, and who analyze and report building energy performance data. Typical results from the use of this procedure are the monthly and annual energy used for lighting, energy savings from occupancy or daylighting controls, and the percent of the total building energy use that is used by the lighting system. The document is not specifically intended for retrofit applications. However, it does complement Measurement and Verification protocols that do not provide detailed performance metrics or measurement procedures.

Finite element analysis-based design of a fluid-flow control nano-valve

International Nuclear Information System (INIS)

Grujicic, M.; Cao, G.; Pandurangan, B.; Roy, W.N.

2005-01-01

A finite element method-based procedure is developed for the design of molecularly functionalized nano-size devices. The procedure is aimed at the single-walled carbon nano-tubes (SWCNTs) used in the construction of such nano-devices and utilizes spatially varying nodal forces to represent electrostatic interactions between the charged groups of the functionalizing molecules. The procedure is next applied to the design of a fluid-flow control nano-valve. The results obtained suggest that the finite element-based procedure yields the results, which are very similar to their molecular modeling counterparts for small-size nano-valves, for which both types of analyses are feasible. The procedure is finally applied to optimize the design of a larger-size nano-valve, for which the molecular modeling approach is not practical

Applied field test procedures on petroleum release sites

International Nuclear Information System (INIS)

Gilbert, G.; Nichols, L.

1995-01-01

The effective remediation of petroleum contaminated soils and ground water is a significant issue for Williams Pipe Line Co. (Williams): costing $6.8 million in 1994. It is in the best interest, then, for Williams to adopt approaches and apply technologies that will be both cost-effective and comply with regulations. Williams has found the use of soil vapor extraction (SVE) and air sparging (AS) field test procedures at the onset of a petroleum release investigation/remediation accomplish these goals. This paper focuses on the application of AS/SVE as the preferred technology to a specific type of remediation: refined petroleum products. In situ field tests are used prior to designing a full-scale remedial system to first validate or disprove initial assumptions on applicability of the technology. During the field test, remedial system design parameters are also collected to tailor the design and operation of a full-scale system to site specific conditions: minimizing cost and optimizing effectiveness. In situ field tests should be designed and operated to simulate as close as possible the operation of a full-scale remedial system. The procedures of an in situ field test will be presented. The results of numerous field tests and the associated costs will also be evaluated and compared to full-scale remedial systems and total project costs to demonstrate overall effectiveness. There are many advantages of As/SVE technologies over conventional fluid extraction or SVE systems alone. However, the primary advantage is the ability to simultaneously reduce volatile and biodegradable compound concentrations in the phreatic, capillary fringe, and unsaturated zones

Procedimento para seleção de interfaces para produtos modulares baseado no ciclo de projeto de produtos Procedure for interface selection for modular products based on the product design cycle

Directory of Open Access Journals (Sweden)

Régis Kovacs Scalice

2012-12-01

Full Text Available Este artigo aborda a definição de alternativas de interfaces durante desenvolvimento de produtos modulares. Entende-se por interfaces a fronteira entre os módulos que compõem o produto, bem como as interações existentes entre o meio-ambiente em que o produto está inserido e com seus possíveis usuários. Para realizar o projeto de interfaces é proposto um procedimento que auxilia na concepção de alternativas e em sua priorização, de forma a facilitar a tomada de decisão por parte da equipe de projeto. O procedimento proposto foi validado por sua aplicação no desenvolvimento de produtos modulares para o cultivo e beneficiamento de mexilhões em Santa Catarina. Os resultados obtidos demonstram o potencial da ferramenta.This paper deals with the definition of interface alternatives during the development of modular products. Interfaces could be seen as the boundary between modules, as well the existing interactions with the surrounding environment and possible users. In order to carry out interface design, a procedure to aid in the conception of interface alternatives and their ranking is proposed, assisting the design team on decision-making. The procedure proposed was validated during the design of modular products for mussel farming and processing in the State of Santa Catarina. The results achieved show the potential of this design tool.

Algorithm Design on Network Game of Chinese Chess

Science.gov (United States)

Xianmei, Fang

This paper describes the current situation of domestic network game. Contact the present condition of the local network game currently, we inquired to face to a multithread tcp client and server, such as Chinese chess, according to the information, and study the contents and meanings. Combining the Java of basic knowledge, the article study the compiling procedure facing to the object according to the information in Java Swing usage, and the method of the network procedure. The article researched the method and processes of the network procedure carry on the use of Sprocket under the Java Swing. Understood the basic process of compiling procedure using Java and how to compile a network procedure. The most importance is how a pair of machines correspondence-C/S the service system-is carried out. From here, we put forward the data structure,the basic calculate way of the network game- Chinese chess, and how to design and realize the server and client of that procedure. The online games -- chess design can be divided into several modules as follows: server module, client module and the control module.

Computer assisted procedure maintenance

International Nuclear Information System (INIS)

Bisio, R.; Hulsund, J. E.; Nilsen, S.

2004-04-01

The maintenance of operating procedures in a NPP is a tedious and complicated task. Through the whole life cycle of the procedures they will be dynamic, 'living' documents. Several aspects of the procedure must be considered in a revision process. Pertinent details and attributes of the procedure must be checked. An organizational structure must be created and responsibilities allotted for drafting, revising, reviewing and publishing procedures. Available powerful computer technology provides solutions within document management and computerisation of procedures. These solutions can also support the maintenance of procedures. Not all parts of the procedure life cycle are equally amenable to computerized support. This report looks at the procedure life cycle in todays NPPs and discusses the possibilities associated with introduction of computer technology to assist the maintenance of procedures. (Author)

Realistic Vascular Replicator for TAVR Procedures.

Science.gov (United States)

Rotman, Oren M; Kovarovic, Brandon; Sadasivan, Chander; Gruberg, Luis; Lieber, Baruch B; Bluestein, Danny

2018-04-13

Transcatheter aortic valve replacement (TAVR) is an over-the-wire procedure for treatment of severe aortic stenosis (AS). TAVR valves are conventionally tested using simplified left heart simulators (LHS). While those provide baseline performance reliably, their aortic root geometries are far from the anatomical in situ configuration, often overestimating the valves' performance. We report on a novel benchtop patient-specific arterial replicator designed for testing TAVR and training interventional cardiologists in the procedure. The Replicator is an accurate model of the human upper body vasculature for training physicians in percutaneous interventions. It comprises of fully-automated Windkessel mechanism to recreate physiological flow conditions. Calcified aortic valve models were fabricated and incorporated into the Replicator, then tested for performing TAVR procedure by an experienced cardiologist using the Inovare valve. EOA, pressures, and angiograms were monitored pre- and post-TAVR. A St. Jude mechanical valve was tested as a reference that is less affected by the AS anatomy. Results in the Replicator of both valves were compared to the performance in a commercial ISO-compliant LHS. The AS anatomy in the Replicator resulted in a significant decrease of the TAVR valve performance relative to the simplified LHS, with EOA and transvalvular pressures comparable to clinical data. Minor change was seen in the mechanical valve performance. The Replicator showed to be an effective platform for TAVR testing. Unlike a simplified geometric anatomy LHS, it conservatively provides clinically-relevant outcomes and complement it. The Replicator can be most valuable for testing new valves under challenging patient anatomies, physicians training, and procedural planning.

Qualitative mechanism models and the rationalization of procedures

Science.gov (United States)

Farley, Arthur M.

1989-01-01

A qualitative, cluster-based approach to the representation of hydraulic systems is described and its potential for generating and explaining procedures is demonstrated. Many ideas are formalized and implemented as part of an interactive, computer-based system. The system allows for designing, displaying, and reasoning about hydraulic systems. The interactive system has an interface consisting of three windows: a design/control window, a cluster window, and a diagnosis/plan window. A qualitative mechanism model for the ORS (Orbital Refueling System) is presented to coordinate with ongoing research on this system being conducted at NASA Ames Research Center.

Methodology for development of health physics procedures at research reactors in agreement states

International Nuclear Information System (INIS)

Woodard, R.C.; Bauer, T.L.; Wehring, B.W.

1991-01-01

The University of Texas at Austin is awaiting final license approval to operate a new 1 MW TRIGA reactor for teaching and research. All reactor and laboratory operations, experiments, and monitoring are carried out under health physics procedures that address to ensure consideration of all applicable documents as references in order to comply with the regulations and accepted good practices. This paper examines the development of one procedure Radioactive Material Control by use of the method. The process is examined as a tool to apply to any health physics procedure development. Further discussion focuses on the regulatory anomalies observed during development of the procedure and presents the arguments for the authors resolution of these issues. The design of the reactor facility is also detailed to allow for understanding of the problems encountered during procedural development

Step by Step: Biology Undergraduates’ Problem-Solving Procedures during Multiple-Choice Assessment

Science.gov (United States)

Prevost, Luanna B.; Lemons, Paula P.

2016-01-01

This study uses the theoretical framework of domain-specific problem solving to explore the procedures students use to solve multiple-choice problems about biology concepts. We designed several multiple-choice problems and administered them on four exams. We trained students to produce written descriptions of how they solved the problem, and this allowed us to systematically investigate their problem-solving procedures. We identified a range of procedures and organized them as domain general, domain specific, or hybrid. We also identified domain-general and domain-specific errors made by students during problem solving. We found that students use domain-general and hybrid procedures more frequently when solving lower-order problems than higher-order problems, while they use domain-specific procedures more frequently when solving higher-order problems. Additionally, the more domain-specific procedures students used, the higher the likelihood that they would answer the problem correctly, up to five procedures. However, if students used just one domain-general procedure, they were as likely to answer the problem correctly as if they had used two to five domain-general procedures. Our findings provide a categorization scheme and framework for additional research on biology problem solving and suggest several important implications for researchers and instructors. PMID:27909021

Optical system design

CERN Document Server

Fischer, Robert F

2008-01-01

Honed for more than 20 years in an SPIE professional course taught by renowned optical systems designer Robert E. Fischer, Optical System Design, Second Edition brings you the latest cutting-edge design techniques and more than 400 detailed diagrams that clearly illustrate every major procedure in optical design. This thoroughly updated resource helps you work better and faster with computer-aided optical design techniques, diffractive optics, and the latest applications, including digital imaging, telecommunications, and machine vision. No need for complex, unnecessary mathematical derivations-instead, you get hundreds of examples that break the techniques down into understandable steps. For twenty-first century optical design without the mystery, the authoritative Optical Systems Design, Second Edition features: Computer-aided design use explained through sample problems Case studies of third-millennium applications in digital imaging, sensors, lasers, machine vision, and more New chapters on optomechanic...

INERT Atmosphere confinement operability test procedure

International Nuclear Information System (INIS)

RISENMAY, H.R.