WorldWideScience

Sample records for design certification program

  1. NRC review of passive reactor design certification testing programs: Overview, progress, and regulatory perspective

    Energy Technology Data Exchange (ETDEWEB)

    Levin, A.E.

    1995-09-01

    New reactor designs, employing passive safety systems, are currently under development by reactor vendors for certification under the U.S. Nuclear Regulatory Commission`s (NRC`s) design certification rule. The vendors have established testing programs to support the certification of the passive designs, to meet regulatory requirements for demonstration of passive safety system performance. The NRC has, therefore, developed a process for the review of the vendors` testing programs and for incorporation of the results of those reviews into the safety evaluations for the passive plants. This paper discusses progress in the test program reviews, and also addresses unique regulatory aspects of those reviews.

  2. NRC review of passive reactor design certification testing programs: Overview and regulatory perspective

    International Nuclear Information System (INIS)

    Levin, A.E.

    1993-01-01

    Reactor vendors are developing new designs for future deployment, including open-quotes passiveclose quotes light water reactors (LWRs), such as General Electric's (G.E.'s) simplified boiling water reactor (SBWR) and Westinghouse's AP600, which depend primarily on inherent processes, such as national convection and gravity feed, for safety injection and emergency core cooling. The U.S. Nuclear Regulatory Commission (NRC) has implemented a new process, certification of standardized reactor designs, for licensing these Plants. Part 52 of Title 10 of the Code of Federal Regulations (10CFR52) contains the requirements that vendors must meet for design certification. One important section, 10CFR52.47, reads open-quotes Certification of a standard design which . . . utilizes simplified, inherent, passive, or other innovative means to accomplish its safety functions will be granted only if: (1) The performance of each safety feature of the design has been demonstrated through either analysis, appropriate test programs, experience, or a combination thereof; (2) Interdependent effects among the safety features have been found acceptable by analysis, appropriate test programs, experience, or a combination thereof; and (3) Sufficient data exist on the safety features of the design to assess the analytical tools used for safety analyses. . . . The vendors have initiated programs to test innovative features of their designs and to develop data bases needed to validate their analytical codes, as required by the design certification rule. Accordingly, the NRC is reviewing and evaluating the vendors programs to ensure that they address adequately key issues concerning safety system performance. This paper provides an overview of the NRC's review process and regulatory perspective

  3. Advanced Light Water Reactor Plants System 80+trademark Design Certification Program

    International Nuclear Information System (INIS)

    1993-01-01

    The purpose of this report is to provide a status of the progress that was made towards Design Certification of System 80+trademark during the US government's 1993 fiscal year. The System 80+ Advanced Light Water Reactor (ALWR) is a 3931 MW t (1350 MWe) Pressurized Water Reactor (PWR). The design consists of an essentially complete plant. It is based on evolutionary improvements to the Standardized System 80 nuclear steam supply system in operation at Palo Verde Units 1, 2, and 3, and the Duke Power Company P-81 balance-of-plant (BOP) that was designed and partially constructed at the Cherokee plant site. The System 80/P-81 original design has been substantially enhanced to increase conformance with the EPRI ALWR Utility Requirements Document (URD). Some design enhancements incorporated in the System 80+ design are included in the four units currently under construction in the Republic of Korea. These units form the basis of the Korean standardization program. The full System 80+ standard design has been offered to the Republic of China, in response to their recent bid specification. The ABB-CE Standard Safety Analysis Report (CESSAR-DC) was submitted to the NRC and a Draft Safety Evaluation Report was issued by the NRC in October 1992. CESSAR-DC contains the technical basis for compliance with the EPRI URD for simplified emergency planning. The Nuclear Steam Supply System (NSSS) is the standard ABB-Combustion Engineering two-loop arrangement with two steam generators, two hot legs and four cold legs each with a reactor coolant pump. The System 80+ standard plant includes a sperical steel containment vessel which is enclosed in a concrete shield building, thus providing the safety advantages of a dual containment

  4. Transit management certificate program.

    Science.gov (United States)

    2012-07-01

    TTI worked closely with the Landscape Architecture and Urban Planning Department : (LAUP) of Texas A&M University (TAMU) to develop a transit management certificate : focus for the current Graduate Certificate in Transportation Planning (CTP) housed ...

  5. Renewable Energy Certificate Program

    Energy Technology Data Exchange (ETDEWEB)

    Gwendolyn S. Andersen

    2012-07-17

    This project was primarily to develop and implement a curriculum which will train undergraduate and graduate students at the University seeking a degree as well as training for enrollees in a special certification program to prepare individuals to be employed in a broad range of occupations in the field of renewable energy and energy conservation. Curriculum development was by teams of Saint Francis University Faculty in the Business Administration and Science Departments and industry experts. Students seeking undergraduate and graduate degrees are able to enroll in courses offered within these departments which will combine theory and hands-on training in the various elements of wind power development. For example, the business department curriculum areas include economic modeling, finance, contracting, etc. The science areas include meteorology, energy conversion and projection, species identification, habitat protection, field data collection and analysis, etc.

  6. Online Information Technologies Certificate Program

    Directory of Open Access Journals (Sweden)

    Erman YUKSELTURK

    2005-01-01

    Full Text Available Online Information Technologies Certificate Program Res. Ass. Erman YUKSELTURK Middle East Technical University Department of Computer Education and Instructional Technology, Faculty of Education, Ankara, TURKEY ABSTRACT In this study, Information Technologies Certificate Program which is based on synchronous and asynchronous communication methods over the Internet offered by cooperation of Middle East Technical University, Computer Engineering Department and Continuing Education Center were examined. This online certificate program started in May 1998 and it is still active. The program includes eight fundamental courses of Computer Engineering Department and comprised of four semesters lasting totally nine months. The main aim of this program is to train the participants in IT field to meet demand in the field of computer technologies in Turkey. As a conclusion, the properties of this program were discussed in a detailed way.

  7. WASTE CERTIFICATION PROGRAM PLAN - REVISION 7

    International Nuclear Information System (INIS)

    MORGAN, LK

    2002-01-01

    The primary changes that have been made to this revision reflect the relocation of the Waste Certification Official (WCO) organizationally from the Quality Services Division (QSD) into the Laboratory Waste Services (LWS) Organization. Additionally, the responsibilities for program oversight have been differentiated between the QSD and LWS. The intent of this effort is to ensure that those oversight functions, which properly belonged to the WCO, moved with that function; but retain an independent oversight function outside of the LWS Organization ensuring the potential for introduction of organizational bias, regarding programmatic and technical issues, is minimized. The Waste Certification Program (WCP) itself has been modified to allow the waste certification function to be performed by any of the personnel within the LWS Waste Acceptance/Certification functional area. However, a single individual may not perform both the technical waste acceptance review and the final certification review on the same 2109 data package. Those reviews must be performed by separate individuals in a peer review process. There will continue to be a designated WCO who will have lead programmatic responsibility for the WCP and will exercise overall program operational oversite as well as determine the overall requirements of the certification program. The quality assurance organization will perform independent, outside oversight to ensure that any organizational bias does not degrade the integrity of the waste certification process. The core elements of the previous WCP have been retained, however, the terms and process structure have been modified.. There are now two ''control points,'' (1) the data package enters the waste certification process with the signature of the Generator Interface/Generator Interface Equivalent (GI/GIE), (2) the package is ''certified'', thus exiting the process. The WCP contains three steps, (1) the technical review for waste acceptance, (2) a review of the

  8. Developing an Online Certification Program for Nutrition Education Assistants

    Science.gov (United States)

    Christofferson, Debra; Christensen, Nedra; LeBlanc, Heidi; Bunch, Megan

    2012-01-01

    Objective: To develop an online certification program for nutrition education paraprofessionals to increase knowledge and confidence and to overcome training barriers of programming time and travel expenses. Design: An online interactive certification course based on Supplemental Nutrition Assistance Program-Education and Expanded Food and…

  9. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 11 discusses Radiation Protection, Conduct of Operations, and the Initial Test Program

  10. Certification trails and software design for testability

    Science.gov (United States)

    Sullivan, Gregory F.; Wilson, Dwight S.; Masson, Gerald M.

    1993-01-01

    Design techniques which may be applied to make program testing easier were investigated. Methods for modifying a program to generate additional data which we refer to as a certification trail are presented. This additional data is designed to allow the program output to be checked more quickly and effectively. Certification trails were described primarily from a theoretical perspective. A comprehensive attempt to assess experimentally the performance and overall value of the certification trail method is reported. The method was applied to nine fundamental, well-known algorithms for the following problems: convex hull, sorting, huffman tree, shortest path, closest pair, line segment intersection, longest increasing subsequence, skyline, and voronoi diagram. Run-time performance data for each of these problems is given, and selected problems are described in more detail. Our results indicate that there are many cases in which certification trails allow for significantly faster overall program execution time than a 2-version programming approach, and also give further evidence of the breadth of applicability of this method.

  11. Professional Certification

    Science.gov (United States)

    WaterSense recognizes certification programs for irrigation professionals that meet the specification criteria. Certification programs cover three areas: irrigation system design, installation and maintenance, and system auditing.

  12. Advanced Light Water Reactor Plants System 80+trademark Design Certification Program

    International Nuclear Information System (INIS)

    Davis, G.A.

    1992-01-01

    Since 1985, ABB Combustion Engineering Nuclear Power (CENP) and Duke Engineering ampersand Services, Inc. (DE ampersand S) have been developing the next generation of pressurized water reactor (PWR) plant for worldwide deployment. The goal is to make available a pre-licensed, standardized plant design that can satisfy the need for a reliable and economic supply of electricity for residential, commercial and industrial use. To ensure that such a design is available when needed, it must be based on proven technology and established licensing criteria. These requirements dictate development of nuclear technology that is advanced, yet evolutionary in nature. This has been achieved with the System 80+ Standard Plant Design

  13. Development of a Decommissioning Certificate Program; TOPICAL

    International Nuclear Information System (INIS)

    M. R. Morton

    1999-01-01

    A Decommissioning Certificate Program has been developed at Washington State University Tri-Cities (WSU TC) in conjunction with Bechtel Hanford, Inc. (BHI), and the U.S. Department of Energy (DOE)to address the increasing need for qualified professionals to direct and manage decommissioning projects. The cooperative effort between academia, industry, and government in the development and delivery of this Program of education and training is described, as well as the Program's design to prepare students to contribute sooner, and at a higher level, to decommissioning projects

  14. Development of a Decommissioning Certificate Program

    International Nuclear Information System (INIS)

    Morton, M. R.

    1999-01-01

    A Decommissioning Certificate Program has been developed at Washington State University Tri-Cities (WSU TC) in conjunction with Bechtel Hanford, Inc. (BHI), and the U.S. Department of Energy (DOE)to address the increasing need for qualified professionals to direct and manage decommissioning projects. The cooperative effort between academia, industry, and government in the development and delivery of this Program of education and training is described, as well as the Program's design to prepare students to contribute sooner, and at a higher level, to decommissioning projects

  15. Answering the Call of the Web: UVA Crafts a Innovative Web Certification Program for Its Staff.

    Science.gov (United States)

    Lee, Sandra T.

    2000-01-01

    Describes the development of a Web Certification Program at the University of Virginia. This program offers certificates at three levels: Web Basics, Web Designer, and Web Master. The paper focuses on: determination of criteria for awarding certificates; program status; program evaluation and program effectiveness; and future plans for the Web…

  16. Implementation procedures for design certification

    International Nuclear Information System (INIS)

    Ritterbusch, S. E.; Brinkman, C. B.; Crump, M. W.

    1995-01-01

    The desire for safer plants arose primarily as the result of the Three Mile Island accident and the realization that plant safety could be impacted by complex plant systems interactions that are not easily identified through the traditional 'system-by-system' design process. Hence, it became apparent that the ALWR designs would have to be addressed through plant-wide Probabilistic Safety Assessments (PSAs) that addressed both accident-prevention and accident-mitigation design features. Prior to Design Certification the 'two-step' licensing process in the United States was not efficient. Utilities had to commit large amounts of capital to plant construction without confidence that an operating license would be issued when construction permit was issued often required design changes that resulted in significant construction delays. The 55 utilities operating nuclear plants in the U. S. each had their own design and operating preferences, resulting in many customized plants with a minimum of economic benefit from standardization. This was addressed by the U. S. Nuclear Regulatory Commission (NRC) in a new regulation (Title 10 of the Code of Federal Regulations, Part 52 or '10 CFR 52') which provides certification of a design that can later be referenced by an applicant for a Combined Operating License (COL). Identifying an ALWR solution for previously unanalyzed severe accident scenarios appeared difficult, at best, since severe accident research had to be performed and since there was no regulatory precedent. This meant that complex technical issues and licensing review policies had to be developed without the benefit of licensing standards or experience. As a result, a system of iterative interactions between the regulator and the industry was established, wherein a design or safety requirement would be proposed, then discussed along with development of the corresponding design feature, and finally revised and documented via NRC 'guidance'

  17. The PACKTRAM database on national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. User's guide for compiled system program

    International Nuclear Information System (INIS)

    1995-01-01

    The PACKTRAM system program enables Member States to prepare data diskettes on national competent authorities' approval certificates for package design, special form material and shipment of radioactive material, for submission to the IAEA, and facilitates data manipulation and report preparation for the IAEA. The system program is provided as a 424 kbyte executable file, for which this document is the User Guide. The system is fully menu-driven and requires an IBM-compatible personal computer with a minimum of 640 kbyte random access memory, a hard drive and one 3-1/2 inch diskette drive. 3 refs, 6 tabs

  18. 24 CFR 200.936 - Supplementary specific procedural requirements under HUD building products certification program...

    Science.gov (United States)

    2010-04-01

    ... requirements under HUD building products certification program for solid fuel type room heaters and fireplace... Supplementary specific procedural requirements under HUD building products certification program for solid fuel... fireplace stoves certified under the HUD Building Products Certification Program shall be designed...

  19. Advanced light water reactor plants System 80+trademark design certification program. Annual progress report, October 1, 1994 - September 30, 1995

    International Nuclear Information System (INIS)

    1998-01-01

    The purpose of this report is to provide the status of the progress that was made towards Design Certification of System 80+trademark during the US government's 1995 fiscal year. The System 80+ Advanced Light Water Reactor (ALWR) is a 3931 MW (1350 MWe) Pressurized Water Reactor (PWR). The design covers an essentially complete plant. It is based on EPRI ALWR Utility Requirements Document (URD) improvements to the Standardized System 80 Nuclear Steam Supply System (NSSS) in operation at Palo Verde Units 1, 2, and 3. The NSSS is a traditional two-loop arrangement with two steam generators, two hot legs and four cold legs, each with a reactor coolant pump. The System 80+ standard design houses the NSSS in a spherical steel containment vessel which is enclosed in a concrete shield building, thus providing the safety advantages of a dual barrier to radioactivity release. Other major features include an all-digital, human-factors-engineered control room, an alternate electrical AC power source, an In-Containment Refueling Water Storage Tank (IRWST), and plant arrangements providing complete separation of redundant trains in safety systems

  20. Advanced light water reactor plants System 80+{trademark} design certification program. Annual progress report, October 1, 1994--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    The purpose of this report is to provide the status of the progress that was made towards Design Certification of System 80+{trademark} during the US government`s 1995 fiscal year. The System 80+ Advanced Light Water Reactor (ALWR) is a 3931 MW (1350 MWe) Pressurized Water Reactor (PWR). The design covers an essentially complete plant. It is based on EPRI ALWR Utility Requirements Document (URD) improvements to the Standardized System 80 Nuclear Steam Supply System (NSSS) in operation at Palo Verde Units 1, 2, and 3. The NSSS is a traditional two-loop arrangement with two steam generators, two hot legs and four cold legs, each with a reactor coolant pump. The System 80+ standard design houses the NSSS in a spherical steel containment vessel which is enclosed in a concrete shield building, thus providing the safety advantages of a dual barrier to radioactivity release. Other major features include an all-digital, human-factors-engineered control room, an alternate electrical AC power source, an In-Containment Refueling Water Storage Tank (IRWST), and plant arrangements providing complete separation of redundant trains in safety systems.

  1. Advanced light water reactor plants System 80+trademark design certification program. Annual progress report, October 1, 1995 - September 30, 1996

    International Nuclear Information System (INIS)

    1996-01-01

    The purpose of this report is to provide a status of the progress that was made towards Design Certification of System 80+trademark during the US government's 1996 fiscal year. The System 80+ Advanced Light Water Reactor (ALWR) is a 3931 MW (1350 MWe) Pressurized Water Reactor (PWR). The design covers an essentially complete plant. It is based on EPRI ALWR Utility Requirements Document (URD) improvements to the Standardized System 80 Nuclear Steam Supply System (NSSS) in operation at Palo Verde Units 1, 2 and 3. The NSSS is a traditional two-loop arrangement with two steam generators, two hot legs and four cold legs, each with a reactor coolant pump. The System 80+ standard design houses the NSSS in a spherical steel containment vessel which is enclosed in a concrete shield building, thus providing the safety advantages of a dual barrier to radioactivity release. Other major features include an all-digital, human-factors-engineered control room, an alternate electrical AC power source, an In-Containment Refueling Water Storage Tank (IRWST), and plant arrangements providing complete separation of redundant trains in safety systems

  2. Developing an interdisciplinary certificate program in transportation planning, phase 2 : the eCertificate.

    Science.gov (United States)

    2011-11-01

    This proposal extends the delivery of the recently developed graduate Certificate in Transportation : Planning to a wider audience through the establishment of an Executive Certificate Program by distance : (eCertificate). While the need for an inter...

  3. ECOTOURISM CERTIFICATION PROGRAMS: STANDARDS AND BENEFITS

    Directory of Open Access Journals (Sweden)

    Mariia Holub

    2015-11-01

    Full Text Available The problem of researching the ecotourism certification processes in the world is very up-to-date nowadays. The relevance of the research is stipulated by current state of environ-mental pollutants, the development of sustainable politics implementation and the fact that now people aware of real danger of environmental catastrophe that threatens the survival of civilization. That’s why the purpose of the article is conducting a complex analysis of foreign ecotourism certi-fication programs. Moreover, it is necessary to study the evolution of ecotourism development to understand the key issues of this problem. The object of this article is the analysis of ecotourism certification worldwide. The subject of the article is the detection of theoretical, methodological and practical aspects of implementation of effective ecotourism certification programs in Ukraine. To clarify all aspects of studying this issue it is necessary to use such theoretical and methodological basis as: modern theories of the genesis and evolution of ecological tourism, logical and analogy analysis, historical method, hypothetical method, classification and graphical method. Using such methods it was found that the development of ecotourism formation has taking three evolutionary steps, which affected the creation of its definition. This fact reveals the classification of different types of sustainable tourism and provides an impetus of ecotourism certification studies. Moreover, it was identified that there is a logical regularity in ecotourism certification programs all over the world. As the result, it was found that practically all the ecotourism certification processes are functioning successfully nowadays. By the way, it can be observed the rapid increase in the amount of ecocertified companies. Moreover, the programs which were analyzed in this article were divided into several steps (depends on the ecotourism certification program following which a company can

  4. Status of system 80+ design certification

    International Nuclear Information System (INIS)

    Matzie, R.A.

    1992-01-01

    This paper reports that 1991 was a year of great progress in the design certification process for ABB Combustion Engineering Nuclear Power's 1300 MWe evolutionary advanced light water reactor (ALWR) plant, System 80+. As the next generation of nuclear power plants move toward final design approval by the U.S. Nuclear Regulatory Commission (NRC), elements of the design process that emphasize operation and maintenance have become the focus. For System 80+, licensing under the new design certification process is now concentrated on operational support, human engineering, plant layout, and computer-aided engineering

  5. Guidelines for developing certification programs for newly generated TRU waste

    International Nuclear Information System (INIS)

    Whitty, W.J.; Ostenak, C.A.; Pillay, K.K.S.; Geoffrion, R.R.

    1983-05-01

    These guidelines were prepared with direction from the US Department of Energy (DOE) Transuranic (TRU) Waste Management Program in support of the DOE effort to certify that newly generated TRU wastes meet the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria. The guidelines provide instructions for generic Certification Program preparation for TRU-waste generators preparing site-specific Certification Programs in response to WIPP requirements. The guidelines address all major aspects of a Certification Program that are necessary to satisfy the WIPP Waste Acceptance Criteria and their associated Compliance Requirements and Certification Quality Assurance Requirements. The details of the major element of a Certification Program, namely, the Certification Plan, are described. The Certification Plan relies on supporting data and control documentation to provide a traceable, auditable account of certification activities. Examples of specific parts of the Certification Plan illustrate the recommended degree of detail. Also, a brief description of generic waste processes related to certification activities is included

  6. Early Exposure to Research: Outcomes of the ASTER Certification Program

    Science.gov (United States)

    Griffard, Phyllis Baudoin; Golkowska, Krystyna

    2013-01-01

    This paper discusses a novel structure for providing a high-impact, first year experience for science students. ASTER (Access to Science Through Experience in Research) is an extracurricular certification program designed to introduce our students to the research culture via seminar attendance, journal clubs, book clubs, and lab visits.…

  7. Facility certification program for coal miners pneumoconiosis

    International Nuclear Information System (INIS)

    Trout, E.D.; Kelley, J.P.; Larson, V.L.; Herbert, G.L.

    1976-01-01

    Public Law 91-173, often referred to as the Black Lung Law, called for a chest radiograph of all active coal miners at stated intervals. The National Institute for Occupational Safety and Health was responsible for carrying out the provisions of the law. Among other requirements was a provision for certification of radiological facilities where radiological examinations would be provide. A test object to be radiographed by each such facility was designed and sent to those facilities applying for certification. To date, 284 facilities have applied for certification of which 215 have been approved. A record has been kept of the number of times any approved facility submitted radiographs before approval. A complete listing of the types of equipment used, personnel qualifications and other pertinent data will be reported

  8. 45 CFR 170.490 - Sunset of the temporary certification program.

    Science.gov (United States)

    2010-10-01

    ... TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

  9. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80+trademark Standard Design. This Volume 16 details the application of Human Factors Engineering in the design process

  10. System 80+{trademark} Standard Design: CESSAR design certification. Volume 11: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 11 discusses Radiation Protection, Conduct of Operations, and the Initial Test Program.

  11. The Effectiveness of Texas Teacher Certification Programs as Evidenced through Pass Rates on TExES PPR 160 Exam

    Science.gov (United States)

    Clouse, Scarlet

    2013-01-01

    The purpose of this study was to investigate the differences between alternative certification pathways, specifically those offered through a university-based, post baccalaureate certification program and a regional education service center certification program. A quantitative research design was implemented and archived scores on the TExES PPR…

  12. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 10 discusses the Steam and Power Conversion System and Radioactive Waste Management

  13. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 9 discusses Electric Power and Auxiliary Systems

  14. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describes the Combustion Engineering, Inc. System 80+trademark Standard Design. This Volume 17 provides Appendix A of this report, closure of unresolved and Genetic Safety Issues

  15. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 8 provides a description of instrumentation and controls

  16. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80+trademark Standard Design. This Volume 18 provides Appendix B, Probabilistic Risk Assessment

  17. Radiation protection technologist training and certification program

    International Nuclear Information System (INIS)

    1982-10-01

    The purpose of this program is to establish training requirements and methods for certifying the technical competence of Radiation Protection Technologists. This manual delineates general requirements as well as academic training, on-the-job training, area of facility training, and examination or evaluation requirements for Radiation Protection Trainees (Trainees), Junior Radiation Protection Technologists (JRPT), Radiation Protection Technologists (RPT), and Senior Radiation Protection Technologists (SRPT). This document also includes recertification requirements for SRPTs. The appendices include training course outlines, on-the-job training outlines, and training certification record forms

  18. Nuclear pharmacy certificate program: distance learning

    International Nuclear Information System (INIS)

    Shaw, S.M.

    1998-01-01

    The Nuclear Pharmacy Certificate Program (NPCP) was developed to meet the need for licensed pharmacists wishing to change career paths and enter the practice of nuclear pharmacy. Additionally, the NPCP benefits employers that wish to employ a nuclear pharmacist in lieu of waiting for graduates that are available only at one time yearly from a college of pharmacy. The NPCP is not intended to replace traditional nuclear pharmacy education in academic institutions, but to offer an another option to pharmacists and potential employers. The NPCP is divided into two components. One component involves over 130 hours of instruction through videotapes and accompanying workbooks. This component is completed while working in a nuclear pharmacy and with the assistance of a nuclear pharmacist serving as a supervisor. The nuclear pharmacist is available to answer questions and to administer examinations over the videotape material. Examinations are prepared by Purdue faculty and returned for grading. Scores on exams must reflect learning to the same degree as in an academic environment. In the second component of the NPCP, the trainee attends a two-week session in the School of Pharmacy at Purdue University. the trainee must complete a significant portion of the videotape material before the on-campus session. In the on-campus component, videotape material is reinforced and expanded by laboratory exercises and lectures in dedicated, fully-equipped laboratories employed in the School of Pharmacy undergraduate program in nuclear pharmacy. Nuclear pharmacy faculty and consultants provide individualized instruction to each trainee. Assimilation of lecture and laboratory material is determined through several examinations. A comprehensive examination is administered which includes content from the videotape-workbook component of the NPCP. Certification is awarded to trainees who have completed the program and demonstrated their knowledge and competence by examination. Almost 200

  19. Design and implementation of PKI-based certification authority

    Science.gov (United States)

    Zheng, Ying; Bai, Qinghai; Zhao, Linna; Chun, Hua; Chen, Jing

    2015-12-01

    PKI achieves the management of public key by certificates. It combines the user's public key and his or her identification formation through a trusted third-party organization CA, in order to authenticate the user's identity on the Internet, thus ensuring the authenticity, integrity, confidentiality, and non- repudiation of the information transmitted on the Internet. CA is the most critical agency in the PKI system, mainly responsible for issuing and managing certificates. On the basis of the actual needs of an enterprise, in this paper the author designs and develops a small-sized PKI-based Certification Authority equipped with the functions of root CA initialization, certificate application, certificate issuance, certificate revocation, and the generation of certificate revocation list. The author also points out the problems that need to be mentioned in the design and development.

  20. The Evolution of an Online Substance Abuse Counseling Certificate Program

    Science.gov (United States)

    Crozier, Mary K.

    2012-01-01

    In the field of rehabilitation services, substance abuse counseling requires unique skills. Post-baccalaureate academic certificate programs offer professionals an opportunity to retool or expand their skills and meet licensure needs in this evolving field. East Carolina University's online Substance Abuse Counseling Certificate Program was…

  1. The new international certification and design principles

    International Nuclear Information System (INIS)

    Heijnen, W.H.P.M.; Heineman, H.

    1995-01-01

    ISO/TC 67 deals with standardization of Equipment for the Petroleum and Natural Gas Industries at a global level. The paper will provide the reader with insight in the Certification system as well as its link with Design. It will explain how the total process fits in the business structure of the Petroleum and Natural Gas Industry, with the focus on the emerging concepts such as partnering, turn key contracts, the developments in the EC and the need to reduce costs at a global basis. The paper will also address the topic of Design Principles based on the results of the study performed for ISO/TC 67. The paper will provide a framework that can be used by the industry in how to deal with issues such as, there shall the activity of the Operator be focused on when ordering equipment or services and how the manufacturer or service provider should prepare himself to become an equal partner with regard to the required equipment, service and its associated technology now and in the future. In the changing world with ever increasing focus on Health, Safety and Environment (HSE), the topic efficiency, technology, equipment performance and functionality should not be overlooked or been given less attention. The Certification and Design principles, implemented in standards, aim predominantly at Fitness for Purpose of equipment and/or services to regain the balance. A further aim is to limit consequential costs due to deficiencies in the broadest sense, allowing the Petroleum and Natural Gas Industry to produce oil and gas in a cost effective manner with the highest possible HSE targets

  2. Solid, low-level radioactive waste certification program

    International Nuclear Information System (INIS)

    Grams, W.H.

    1991-11-01

    The Hanford Site solid waste treatment, storage, and disposal facilities accept solid, low-level radioactive waste from onsite and offsite generators. This manual defines the certification program that is used to provide assurance that the waste meets the Hanford Site waste acceptance criteria. Specifically, this program defines the participation and responsibilities of Westinghouse Hanford Company Solid Waste Engineering Support, Westinghouse Hanford Company Quality Assurance, and both onsite and offsite waste generators. It is intended that waste generators use this document to develop certification plans and quality assurance program plans. This document is also intended for use by Westinghouse Hanford Company solid waste technical staff involved in providing assurance that generators have implemented a waste certification program. This assurance involves review and approval of generator certification plans, and review of generator's quality assurance program plans to ensure that they address all applicable requirements. The document also details the Westinghouse Hanford Company Waste Management Audit and Surveillance Program. 5 refs

  3. 75 FR 54591 - Notice of Agricultural Management Assistance Organic Certification Cost-Share Program

    Science.gov (United States)

    2010-09-08

    ...] Notice of Agricultural Management Assistance Organic Certification Cost-Share Program AGENCY... Agricultural Management Assistance Organic Certification Cost-Share Program. SUMMARY: This Notice invites the... Agreement with the Agricultural Marketing Service (AMS) for the Allocation of Organic Certification Cost...

  4. Waste certification program plan for Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Kornegay, F.C.

    1996-09-01

    This document defines the waste certification program being developed for implementation at Oak Ridge National Laboratory (ORNL). The document describes the program structure, logic, and methodology for certification of ORNL wastes. The purpose of the waste certification program is to provide assurance that wastes are properly characterized and that the Waste Acceptance Criteria (WAC) for receiving facilities are met. The program meets the waste certification requirements outlined in U.S. Department of Energy (DOE) Order 5820.2A, Radioactive Waste Management, and ensures that 40 CFR documentation requirements for waste characterization are met for mixed (both radioactive and hazardous) and hazardous (including polychlorinated biphenyls) waste. Program activities will be conducted according to ORNL Level 1 document requirements

  5. Developing an interdisciplinary certificate program in transportation planning.

    Science.gov (United States)

    2010-09-01

    This project develops and implements a graduate certificate in transportation planning. Texas A&M : University (A&M) currently offers instruction in transportation through its Master of Urban Planning (MUP) : and Civil Engineering (CE) programs; howe...

  6. Modernizing dermatology interest groups in medical school: Certificate programs.

    Science.gov (United States)

    Wang, Jordan V; Korta, Dorota Z; Keller, Matthew

    2017-11-15

    This commentary addresses the increasingly competitive nature of applying to dermatology residency programs and how both interest groups in medical schools and their dermatology departments can help to better prepare applicants. As previous literature argued that dermatology has been underemphasized in medical school curricula, we propose five fundamental options that interest groups can implement in order to offer increased exposure to our field in medical training. Furthermore, with therecent trend of many schools conferring certificates in various specialized concentrations, we also discuss interest groups pioneering certificate-grantingprograms in dermatology competency. The pros and cons of having a recognized certificate program in dermatology are presented.

  7. Energy Systems Training Programs and Certifications Survey White Paper

    Energy Technology Data Exchange (ETDEWEB)

    Cox, Daryl [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nimbalkar, Sachin U. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wenning, Thomas J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Thirumaran, Kiran [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Guo, Wei [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-02-01

    Compressed air system, industrial refrigeration system, chilled water system, pump system, fan system, steam system, process heating system, and combined heat and power system are the major industrial energy systems. By helping enhance knowledge and skills of workforce, training and certification programs on these systems are essential to improve energy efficiency of manufacturing facilities. A literature survey of currently available training and certification programs on these systems was conducted.

  8. Structural Design Challenges in Design Certification Applications for New Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, M.; Braverman, J.; Wei, X.; Hofmayer, C.; Xu, J.

    2011-07-17

    The licensing framework established by the U.S. Nuclear Regulatory Commission under Title 10 of the Code of Federal Regulations (10 CFR) Part 52, “Licenses, Certifications, and Approvals for Nuclear Power Plants,” provides requirements for standard design certifications (DCs) and combined license (COL) applications. The intent of this process is the early reso- lution of safety issues at the DC application stage. Subsequent COL applications may incorporate a DC by reference. Thus, the COL review will not reconsider safety issues resolved during the DC process. However, a COL application that incorporates a DC by reference must demonstrate that relevant site-specific de- sign parameters are confined within the bounds postulated by the DC, and any departures from the DC need to be justified. This paper provides an overview of structural design chal- lenges encountered in recent DC applications under the 10 CFR Part 52 process, in which the authors have participated as part of the safety review effort.

  9. 75 FR 56795 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2010-09-16

    ...: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment... product, additional provisions for imports, voluntary industry certification programs (VICP), verification... DOE intends to apply certification, compliance, and enforcement regulations to all covered products...

  10. 75 FR 34148 - Voluntary Private Sector Accreditation and Certification Preparedness Program

    Science.gov (United States)

    2010-06-16

    ...] Voluntary Private Sector Accreditation and Certification Preparedness Program AGENCY: Federal Emergency...) announces its adoption of three standards for the Voluntary Private Sector Accreditation and Certification... DHS to develop and implement a Voluntary Private Sector Preparedness Accreditation and Certification...

  11. Learning Mendeley Through Its Certification Program for Librarians

    OpenAIRE

    Nariani, Rajiv; Ithayakumar, Yath

    2016-01-01

    York University Libraries (YUL) ended its subscription to their default citation management program in the summer of 2015. The Mendeley Certification Program for Librarians was launched during that time and the science librarian at YUL completed this program. The steps undertaken during the completion of the program led to successful migration to the freely available, and libraries supported, citation management programs. This paper details the various initiatives that were done prior to and ...

  12. MHTGR demonstration role in the NRC design certification process

    International Nuclear Information System (INIS)

    Kelley, A.P. Jr.; Jones, G.

    1986-01-01

    A modular high-temperature gas-cooled reactor (MHTGR) design is being developed by the US HTGR Program. Because of the small size of the individual modules that would make up a commercial facility, it appears feasible to design and construct a single-module demonstration plant within the funding constraints on the public and private-sector program participants. Furthermore, the safety margins that can be made inherent to the design permit full-scale testing that could supply a new basis for demonstrating investment protection and safety adequacy to the public, the US Nuclear Regulatory Commission (NRC), and potential users. With this in mind, a Project Definition Study was sponsored by Gas-Cooled Reactor Associates and the Tennessee Valley Authority to study the potential benefits of undertaking such a demonstration project. One of the areas investigated was the potential benefits of such a facility in supporting the NRC design certification process, which is envisioned as a necessary commercialization step for the MHTGR

  13. 7 CFR 785.3 - Annual certification of State mediation programs.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Annual certification of State mediation programs. 785... AGENCY, DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS CERTIFIED STATE MEDIATION PROGRAM § 785.3 Annual certification of State mediation programs. To obtain FSA certification of the State's mediation program, the...

  14. 76 FR 55000 - Notice of Agricultural Management Assistance Organic Certification Cost-Share Program

    Science.gov (United States)

    2011-09-06

    ...] Notice of Agricultural Management Assistance Organic Certification Cost-Share Program AGENCY... Departments of Agriculture for the Agricultural Management Assistance Organic Certification Cost-Share Program... organic certification cost-share funds. The AMS has allocated $1.5 million for this organic certification...

  15. 75 FR 54590 - Notice of 2010 National Organic Certification Cost-Share Program

    Science.gov (United States)

    2010-09-08

    ...] Notice of 2010 National Organic Certification Cost-Share Program AGENCY: Agricultural Marketing Service... Certification Cost-Share Funds. The AMS has allocated $22.0 million for this organic certification cost-share... National Organic Certification Cost- Share Program is authorized under 7 U.S.C. 6523, as amended by section...

  16. Oak Ridge National Laboratory Transuranic Waste Certification Program

    International Nuclear Information System (INIS)

    Smith, J.H.; Bates, L.D.; Box, W.D.; Aaron, W.S.; Setaro, J.A.

    1988-08-01

    The US Department of Energy (DOE) has requested that all DOE facilities handling defense transuranic (TRU) waste develop and implement a program whereby all TRU waste will be contained, stored, and shipped to the Waste Isolation Pilot Plant (WIPP) in accordance with the requirements set forth in the DOE certification documents WIPP-DOE-069, 114, 120, 137, 157, and 158. The program described in this report describes how Oak Ridge National Laboratory (ORNL) intends to comply with these requirements and the techniques and procedures used to ensure that ORNL TRU wastes are certifiable for shipment to WIPP. This document describes the program for certification of newly generated (NG) contact-handled transuranic (CH-TRU) waste. Previsions have been made for addenda, which will extend the coverage of this document to include certification of stored CH-TRU and NG and stored remote-handled transuranic (RH-TRU) waste, as necessary. 24 refs., 11 figs., 4 tabs

  17. MCSD certification toolkit (exam 70-483) programming in C#

    CERN Document Server

    Covaci, Tiberiu; Varallo, Vincent; O'Brien, Gerry

    2013-01-01

    A perfectly crafted prep guide that prepares you for the MCSD 70-483 The MCSD 70-483 exam is the entry-level Microsoft certification exam for C# developers and this must-have resource offers essential coverage of the exam that will test your competency in C# programming. Each chapter covers one of the core subject domains that comprise the exam. Among the authors are experienced trainers who advised Microsoft on the development of its certification programs, affording them a unique understanding of both the objectives and what it takes to master them. This invaluable knowledge is p

  18. Objective Evaluation in an Online Geographic Information System Certificate Program

    OpenAIRE

    Scott L. WALKER

    2005-01-01

    Objective Evaluation in an Online Geographic Information System Certificate Program Asst. Professor. Dr. Scott L. WALKER Texas State University-San Marcos San Marcos, Texas, USA ABSTRACT Departmental decisions regarding distance education programs can be subject to subjective decision-making processes influenced by external factors such as strong faculty opinions or pressure to increase student enrolment. This paper outlines an evaluation of a departmental distance-education program....

  19. The value of assessments in Lawrence Livermore National Laboratory's Waste Certification Programs

    International Nuclear Information System (INIS)

    Ryan, E.M.

    1995-05-01

    This paper will discuss the value of assessments in Lawrence Livermore National Laboratory's Waste Certification Programs by: introducing the organization and purpose of the LLNL Waste Certification Programs for transuranic, low-level, and hazardous waste; examining the differences in internal assessment/audit requirements for these programs; discussing the values and costs of assessments in a waste certification program; presenting practical recommendations to maximize the value of your assessment programs; and presenting improvements in LLNL's waste certification processes that resulted from assessments

  20. Online Certificate Program Moves Participants to Advanced Stages of Concern for Social Marketing

    Science.gov (United States)

    Chaudhary, Anil Kumar; Warner, Laura A.; Stofer, Kathryn A.

    2017-01-01

    Social marketing is an underused strategy that agricultural educators can employ to bring about behavior change. We designed an online certificate program for Extension professionals and other educators based on an identified need for social marketing professional development. The Concerns-Based Adoption Model (CBAM) served as the conceptual…

  1. Waste certification review program at the Savannah River Site

    International Nuclear Information System (INIS)

    Faulk, G.W.; Kinney, J.C.; Knapp, D.C.; Burdette, T.E.

    1996-01-01

    After approving the waste certification programs for 45 generators of low-level radioactive and mixed waste, Westinghouse Savannah River Company (WSRC) moved forward to implement a performance-based approach for assuring that approved waste generators maintain their waste certification programs. WSRC implemented the Waste Certification Review Program, which is comprised of two sitewide programs, waste generator self-assessments and Facility Evaluation Board reviews, integrated with the WSRC Solid Waste Management Department Waste Verification Program Evaluations. The waste generator self-assessments ensure compliance with waste certification requirements, and Facility Evaluation Board reviews provide independent oversight of generators' waste certification programs. Waste verification evaluations by the TSD facilities serve as the foundation of the program by confirming that waste contents and generator performance continue to meet waste acceptance criteria (WSRC 1994) prior to shipment to treatment, storage, and disposal facilities. Construction of the Savannah River Site (SRS) was started by the US Government in 1950. The site covers approximately 300 square miles located along the Savannah River near Aiken, South Carolina. It is operated by the US Department of Energy (DOE). Operations are conducted by managing and operating contractors, including the Westinghouse Savannah River Company (WSRC). Historically, the primary purpose of the SRS was to produce special nuclear materials, primarily plutonium and tritium. In general, low-level radioactive and mixed waste is generated through activities in operations. Presently, 47 SRS facilities generate low-level radioactive and mixed waste. The policies, guidelines, and requirements for managing these wastes are determined by DOE and are reflected in DOE Order 5820.2A (US DOE 1988)

  2. A Gerontology Practitioner Continuing Education Certificate Program: Lessons Learned

    Science.gov (United States)

    Englehardt, Jacqueline; Hash, Kristina M.; Mankowski, Mariann; Harper-Dorton, Karen V.; Pilarte, Ann E.

    2016-01-01

    This article discusses the results of a school of social work survey assessing the geriatric training needs of social workers and other professionals in aging and the need for a gerontology practitioner's continuing education (CE) certificate program. A total of 391 professionals, the majority of whom were social workers, participated in an online…

  3. Alternative Administrative Certification: Socializing Factors Influencing Program Choice

    Science.gov (United States)

    Bickmore, Dana L.; Bickmore, Steven T.; Raines, Sarah

    2013-01-01

    This study used an organizational socialization lens to examine factors influencing participants' decision to pursue the principalship and choice to engage in an alternate administration certification program. Through an analysis of participant focus groups and interviews, factors emerged from the codes that were compared with dimensions of…

  4. Quality Alternative Certification Programs in Special Education Ensure High Retention

    Science.gov (United States)

    Karge, Belinda D.; McCabe, Marjorie

    2014-01-01

    Market driven alternative routes to teaching have evolved into a quality program option and not just an answer to the teacher shortage. Alternative certification is a viable means of recruiting, training, and certifying those who have a bachelor's degree and a strong desire to enter the field of teaching. California has been a leader in the…

  5. Past Performance in Supplier Certification Programs: A Study of Current Certification and Incentive Practices in Certified Supplier Programs

    National Research Council Canada - National Science Library

    Ambrose, Matthew

    1997-01-01

    ... are: requiring a high level of past quality performance for certification, giving certified contractors more future business as an incentive for participation, and using ISO 9001 as the common standard for quality management processes. By adopting these techniques, the Army can improve CP(2) and make it an even more valuable program.

  6. 24 CFR 200.935 - Administrator qualifications and procedures for HUD building products certification programs.

    Science.gov (United States)

    2010-04-01

    ... procedures for HUD building products certification programs. 200.935 Section 200.935 Housing and Urban... for HUD building products certification programs. (a) General. This section establishes administrator qualifications and procedures for the HUD Building Products Certification Programs under section 521 of the...

  7. Section 609 Technician Training and Certification Programs

    Science.gov (United States)

    EPA-approved programs for technicians who service motor vehicle air conditioning (MVAC) systems. Any person who repairs or services a MVAC system for consideration must be certified under section 609 of the Clean Air Act by an EPA-approved program.

  8. The American Board of Radiology Maintenance of Certification (MOC) Program in Radiologic Physics

    International Nuclear Information System (INIS)

    Thomas, Stephen R.; Hendee, William R.; Paliwal, Bhudatt R.

    2005-01-01

    Maintenance of Certification (MOC) recognizes that in addition to medical knowledge, several essential elements involved in delivering quality care must be developed and maintained throughout one's career. The MOC process is designed to facilitate and document the professional development of each diplomate of The American Board of Radiology (ABR) through its focus on the essential elements of quality care in Diagnostic Radiology and its subspecialties, and in the specialties of Radiation Oncology and Radiologic Physics. The initial elements of the ABR-MOC have been developed in accord with guidelines of The American Board of Medical Specialties. All diplomates with a ten-year, time-limited primary certificate in Diagnostic Radiologic Physics, Therapeutic Radiologic Physics, or Medical Nuclear Physics who wish to maintain certification must successfully complete the requirements of the appropriate ABR-MOC program for their specialty. Holders of multiple certificates must meet ABR-MOC requirements specific to the certificates held. Diplomates with lifelong certificates are not required to participate in the MOC, but are strongly encouraged to do so. MOC is based on documentation of individual participation in the four components of MOC: (1) professional standing, (2) lifelong learning and self-assessment, (3) cognitive expertise, and (4) performance in practice. Within these components, MOC addresses six competencies: medical knowledge, patient care, interpersonal and communication skills, professionalism, practice-based learning and improvement, and systems-based practice

  9. Engineering Phase 2 and Phase 3 certification programs -- PUREX deactivation

    International Nuclear Information System (INIS)

    Walser, R.L.

    1994-01-01

    This document describes the training programs required to become a Phase 2 and Phase 3 certified engineer at PUREX during deactivation. With the change in mission, the PUREX engineering/certification training program is being revamped as discussed below. The revised program will be administered by PUREX Technical Training using existing courses and training materials. The program will comply with the requirements of the Department of Energy (DOE) order 5480.20A, ''Personnel Selection, Qualification, Training, and Staffing Requirements at DOE Reactor and Non-Reactor Nuclear Facilities.''

  10. Engineering Phase 2 and Phase 3 certification programs -- PUREX deactivation

    Energy Technology Data Exchange (ETDEWEB)

    Walser, R.L.

    1994-12-13

    This document describes the training programs required to become a Phase 2 and Phase 3 certified engineer at PUREX during deactivation. With the change in mission, the PUREX engineering/certification training program is being revamped as discussed below. The revised program will be administered by PUREX Technical Training using existing courses and training materials. The program will comply with the requirements of the Department of Energy (DOE) order 5480.20A, ``Personnel Selection, Qualification, Training, and Staffing Requirements at DOE Reactor and Non-Reactor Nuclear Facilities.``

  11. Use of certification programs in the radiological protection of the patient

    International Nuclear Information System (INIS)

    Lucino, Sergio; Touzet, Rodolfo

    2008-01-01

    Full text: One of the main recommendations of the Congress of Malaga on Radiological Protection of the Patient is 'the qualification and training of the staff'. This goal cannot be reached in a country, in complete and systematic form, without the help of existing national programs who allow designing a program of continuous development of the professional capacities. This program must be able to adapt in permanent form to the needs of the Program of Radiological Protection of the Patient that change and evolve in constant form. In case of the Argentina it was adapted to these needs the 'National Program of Certification and Re-certification of medical professionals in Radiology and Radio-Diagnosis'. On the base of the existing program, general requirements were established for the radiological protection of the patient and in addition, special requirements for four specialties: a) General and pediatrics radiology; b) Computed tomography; c) Interventional radiology; d) Radiotherapy. The National Program of Certification was established in 1997 with a 'Top Permanent Council' formed by the National Minister of Health advised by a scientific council. It was also creates the 'National Council of Certification and professional Re-certification' integrated by the Minister of Education, the National Academy of Medicine, the Faculties of Medicine of the whole country, the medical Federations, the trade-union Associations and the Argentine Medical Association. The process of certification can be delegated to academic or university entities, medical colleges and medical chambers that have been recognized path and ethical conduct. The certification is voluntary but it becomes obligatory to be recognized as a specialist. The certification has duration of 5 years and is renewable on the basis of a system of credits that considers different elements of the developed activities and the written theoretical and practical evaluations. It is a transparent process where the ethical

  12. Developing an online certification program for nutrition education assistants.

    Science.gov (United States)

    Christofferson, Debra; Christensen, Nedra; LeBlanc, Heidi; Bunch, Megan

    2012-01-01

    To develop an online certification program for nutrition education paraprofessionals to increase knowledge and confidence and to overcome training barriers of programming time and travel expenses. An online interactive certification course based on Supplemental Nutrition Assistance Program-Education and Expanded Food and Nutrition Education Program core competencies was delivered to employees of both programs. Traditional vs online training was compared. Course content validity was determined through expert review by registered dietitians. Parameters studied included increase of nutrition knowledge and teaching technique/ability, educator satisfaction, and programming costs related to training. Utah State University Extension. Twenty-two Supplemental Nutrition Assistance Program-Education and Expanded Food and Nutrition Education Program educators in Utah. Knowledge and skills were measured using pre/posttest statistics. Participant satisfaction was measured with a survey. Paired t test; satisfaction survey. The change in paraprofessional knowledge score was statistically significant (P educators because of the training. An estimated $16,000 was saved by providing the training online as compared to a face-to-face training. This interactive online program is a cost-effective way to increase paraprofessional knowledge and job satisfaction. Copyright © 2012 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  13. Proposed performance standards for the Agricultural Hazardous Occupations Order certification training program.

    Science.gov (United States)

    French, B F; Field, W E; Tormoehlen, R

    2007-07-01

    The performance standards that accompany Gearing Up for Safety, the agricultural production safety training curriculum for youth, were designed to meet the certification testing requirements of the Agricultural Hazardous Occupations Order (AgHOs) certification training program. The AgHOs requires that certain youth who are older than 13 and younger than 16 years of age complete a prescribed training program before being eligible for employment on farms to perform certain tasks considered hazardous. These training resources will be available for implementation and can be accessed by contacting the second author. To our knowledge, up until this time, few, if any, standardized testing procedures or instruments have had the necessary psychometric evidence to support use of the resulting scores to assess the readiness of youth to meet the basic certification requirements contained in the AgHOs. This article describes the rationale, methods, and key findings from a standard-setting session held to establish minimum passing scores for a proposed testing process. The test will be used as a component of the Gearing Up for Safety certification process for youth workers seeking employment to perform job functions as specified under the AgHOs. Readers may be able to apply this standardized testing process, or similarly accepted processes, to other or future testing and certification projects involving agricultural safety and health.

  14. Teaching Certificate Program Participants' Perceptions of Mentor-Mentee Relationships.

    Science.gov (United States)

    Sheehan, Amy Heck; Gonzalvo, Jasmine D; Ramsey, Darin C; Sprunger, Tracy L

    2016-04-25

    Objective. To assess teaching certificate program (TCP) participants' perceptions of mentor-mentee relationships. Methods. A 15-item survey instrument was administered to all 2014-2015 participants of the Indiana Pharmacy Teaching Certificate (IPTeC) program. Results. One hundred percent of IPTeC program participants (83/83) responded to the survey. The majority of participants indicated that having a professional mentor was either very important (52%) or important (47%) to their professional development and preferred to choose their own professional mentor (53%). Mentor characteristics rated as highly important by mentees included having similar clinical practice interests (82%), having similar research interests (66%), and being available to meet face-to-face (90%). Age, race, and gender of the mentor were not rated by mentees as important. Conclusion. Teaching certificate program participants place high importance on having a professional mentor. Mentorship of pharmacists completing TCPs should be a priority for current pharmacy faculty members so adequate guidance is available to future pharmacy educators.

  15. Comparison of energy efficiency incentive programs: Rebates and white certificates

    Energy Technology Data Exchange (ETDEWEB)

    Transue, Morghan; Felder, Frank A. [Center for Energy, Economic, and Environmental Policy, Rutgers the State University of New Jersey, Bloustein School of Planning and Public Policy, 33 Livingston Avenue, New Brunswick, NJ 08901 (United States)

    2010-06-15

    With increased interest in energy efficiency in recent years, energy efficiency portfolio standards (EEPS) have gained popularity in state policymaking. This analysis employed New Jersey specific data to compare two incentive based approaches to EEPS implementation: rebates and white certificates. Quantitative modeling suggests that white certificate approaches that depend on market-clearing prices generate much larger upfront incentive outlays than rebate programs. They do not however increase societal burden. Both programs overcome high upfront efficiency measure costs and both recoup the expenses over the long run. Administration costs and participation rates can affect this dynamic however and require additional research to determine which approaches are most cost effective for various energy efficiency measures. (author)

  16. 76 FR 24761 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2011-05-02

    ... Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and...) Certification. Each manufacturer, before distributing in commerce any basic model of a covered product or.... EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and...

  17. 78 FR 5164 - Notice of Agricultural Management Assistance Organic Certification Cost-Share Program

    Science.gov (United States)

    2013-01-24

    ...] Notice of Agricultural Management Assistance Organic Certification Cost-Share Program AGENCY... Departments of Agriculture for the Agricultural Management Assistance Organic Certification Cost-Share Program... organic certification cost-share funds. The AMS has allocated $1.425 million for this organic...

  18. 76 FR 54999 - Notice of 2011 National Organic Certification Cost-Share Program

    Science.gov (United States)

    2011-09-06

    ...] Notice of 2011 National Organic Certification Cost-Share Program AGENCY: Agricultural Marketing Service... for the National Organic Certification Cost- Share Program. SUMMARY: This Notice invites all States of...) for the allocation of National Organic Certification Cost-Share Funds. Beginning in Fiscal Year 2008...

  19. Cavity design programs

    International Nuclear Information System (INIS)

    Nelson, E.M.

    1996-01-01

    Numerous computer programs are available to help accelerator physicists and engineers model and design accelerator cavities and other microwave components. This article discusses the problems these programs solve and the principles upon which these programs are based. Some examples of how these programs are used in the design of accelerator cavities are also given

  20. ITAAC Development for APR1400 NRC Design Certification

    International Nuclear Information System (INIS)

    Kim, Jin Kwon; Kim, Myoung Ki

    2013-01-01

    ITAAC (Inspections, Tests, Analyses and Acceptance Criteria) is essential document for Design Certification, which is certified by NRC and ruled as the Appendix of the 10 CFR Part 52. Approximately 870 ITAAC items were selected for APR1400 Design Certification to be submitted to NRC. In this paper, the code and standard related to ITAAC and process of ITACC development are discussed to seek the way to complete the best ITAAC to get the Design Certification of APR1400 from NRC through the lessons learned from other competitive applicants. For saving the time and manpower to complete ITAAC of APR1400 NRC DC and reduction of the RAIs (Request Additional Information) from NRC, we took advantage of the lessons learned from the competitive designs like US-APWR and AP1000 based on KNGR ITAAC. Finally new and different ITAAC from ITAAC of KNGR was developed for APR1400 DC from NRC. RG 1.206 and SRPs were applied first in Korea to the APR1400 DCD preparation. For testability and acceptability check, ITAAC V and V table was completed by the system designers. APR1400 DCD will be submitted by the end of September this year and we hope that NRC issues lees RAIs on ITAAC document

  1. 76 FR 16549 - ESBWR Design Certification

    Science.gov (United States)

    2011-03-24

    ... ESBWR design is GE-Hitachi Nuclear Energy (GEH). The public is invited to submit comments on this... Consensus Standards XI. Finding of No Significant Environmental Impact: Availability XII. Paperwork... application, a demonstration that an entity other than GEH Nuclear Energy is qualified to supply the ESBWR...

  2. Trainer certification

    International Nuclear Information System (INIS)

    Couser, S.; Moore, J.

    1988-01-01

    A DOE Technical Safety Appraisal in October 1986 found that training at the Portsmouth Gaseous Diffusion Plant was fragmented and lacked uniformity. Training was localized in departments and was more often handled by line supervisors, etc. - with no certification. The Trainer Certification Program has provided the means for applying standard guidelines to ensure that training is designed, applied, and evaluated in a consistent, effective, and efficient manner. The program is in a state of substantial change and a target date for compliance is set for 1989. Trainer certification will provide both current and future resources to ensure consistent and effective training. 22 figures

  3. Application of Standardized ITAAC to the APR1400 Design Certification

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Deogji; Kim, Yunho [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    Design certification applications (DCAs) submitted pursuant to 10 CFR Part 52 contain two tiers of information, Tier 1 and Tier 2. Tier 1 contains information that is to be certified through rulemaking, and includes the inspections, tests, analyses, and acceptance criteria (ITAAC). Tier 2 contains more detailed information and is the source for information included in Tier1. DC applicants have developed the ITAAC with their own format and contents. This has caused the ineffectiveness of the review process by Nuclear Regulatory Commission (NRC) at the design certification stage. Standardizing the format and content of Tier 1 and ITAAC will achieve greater efficiency and effectiveness for Tier 1 and ITAAC development and NRC review, and for ITAAC implementation and verification. NRC provided the proposed standardized ITAAC for APR1400, and KHNP is considering the application of the proposed ITAAC. The strategy for application of the NRC proposed standardized ITAAC to the APR1400 design certification is now under developing, and a meeting with NRC to review the NRC proposed standardized ITAAC is expected to be held in the near future. In this review process, establishment of industry position on the NRC proposed standardized ITAAC is very important. The support from NEI and US industry is expected to be gained.

  4. Application of Standardized ITAAC to the APR1400 Design Certification

    International Nuclear Information System (INIS)

    Kang, Deogji; Kim, Yunho

    2016-01-01

    Design certification applications (DCAs) submitted pursuant to 10 CFR Part 52 contain two tiers of information, Tier 1 and Tier 2. Tier 1 contains information that is to be certified through rulemaking, and includes the inspections, tests, analyses, and acceptance criteria (ITAAC). Tier 2 contains more detailed information and is the source for information included in Tier1. DC applicants have developed the ITAAC with their own format and contents. This has caused the ineffectiveness of the review process by Nuclear Regulatory Commission (NRC) at the design certification stage. Standardizing the format and content of Tier 1 and ITAAC will achieve greater efficiency and effectiveness for Tier 1 and ITAAC development and NRC review, and for ITAAC implementation and verification. NRC provided the proposed standardized ITAAC for APR1400, and KHNP is considering the application of the proposed ITAAC. The strategy for application of the NRC proposed standardized ITAAC to the APR1400 design certification is now under developing, and a meeting with NRC to review the NRC proposed standardized ITAAC is expected to be held in the near future. In this review process, establishment of industry position on the NRC proposed standardized ITAAC is very important. The support from NEI and US industry is expected to be gained

  5. Overview of the DOE-EM Packaging Certification Program

    International Nuclear Information System (INIS)

    Feldman, M.R.; Bennett, M.E.; Shuler, J.M.

    2009-01-01

    The U.S. Department of Transportation, in 49 CFR 173.7(d) grants the U.S. Department of Energy (DOE) the power to use 'packagings made by or under the direction of the U.S. Department of Energy... for the transportation of Class 7 materials when evaluated, approved and certified by the Department of Energy against packaging standards equivalent to those specified in 10 CFR part 71'. Via DOE Order 460.1B, DOE has established the DOE Packaging Certification Program (PCP) within the Department of Environmental Management for purposes including the certification of radioactive materials packages for DOE use. This paper will provide an overview of the programs and activities currently undertaken by the PCP in support of the safe transport of radioactive materials, including technical review of Safety Analysis Reports for Packaging, development of guidance documents and training courses, a quality assurance audit and field assessment program, database and docket management, and testing and test methodology development. The paper will also highlight the various organizations currently utilized by the PCP to meet the requirements of DOE O 460.1B, as well as some creative and effective methods that are being used to meet program objectives. The DOE Package Certification Program's primary function is to perform technical reviews of SARPs in support of the packaging certification process to ensure that the maximum protection is afforded to the public, all federal regulations are met, and the process is as time-effective and cost-effective as possible. Five additional specific functions are also supported by the PCP: development of guidance documents, training courses, a QA audit and field assessment program, database and docket management, and testing methods development. Each of these functions individually contributes to the overall mission of the PCP as defined in DOE O 460.1B. Taken as a whole, these functions represent a robust program to ensure the safety of workers

  6. System 80+{trademark} Standard Design: CESSAR design certification. Volume 3: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These documents describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design. This report, Volume 3, in conjunction with Volume 2, provides the design of structures, components, equipment and systems.

  7. 76 FR 38287 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2011-06-30

    ... Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial... products will be required to submit certification reports no later than December 31, 2012. DATES: This rule... some certification requirements for these products but make those requirements [[Page 38289

  8. 75 FR 27182 - Energy Conservation Program: Web-Based Compliance and Certification Management System

    Science.gov (United States)

    2010-05-14

    ... Conservation Program: Web-Based Compliance and Certification Management System AGENCY: Office of Energy... following means: 1. Compliance and Certification Management System (CCMS)--via the Web portal: http... certification reports to the Department of Energy (DOE) through an electronic Web-based tool, the Compliance and...

  9. Bureaucratic discretion and alternative teacher certification: understanding program variation in Missouri.

    Directory of Open Access Journals (Sweden)

    Ethan B. Heinen

    2007-06-01

    Full Text Available Alternative teacher certification literature has contributed significantly to our understanding of this approach to teacher preparation. However, this literature has more often than not treated alternative teacher certification programs (ATCPs as a black box, thus ignoring program heterogeneity. The present study examines how and why five ATCPs in Missouri have evolved in different ways. To understand this variation and its potential significance for researchers and practitioners, we use political science literature on bureaucratic discretion to understand programs' varied responses within the same state policy context. Using a multiple case study design, we present two key findings. First, external factors such as the state's regulatory approach, programs' relationships with school districts, and programs' relationship with external partners shape program coordinators' perceptions of their discretionary authority. Second, within an environment of limited regulation, programs responded to these external factors in ways that shaped programs in dramatically different ways. These approaches ranged from formal partnerships with large urban school districts and philanthropic funders to alternative certification programs that were at least partially blended with existing undergraduate and post baccalaureate teacher preparation programs. In our discussion, we explore how state attempts to widen the discretionary space between the rules may have allowed external interests (e.g., school districts, and external funders to backfill that space in ways that limit the potential for programs to provide high quality preparation experiences. This study explores these consequences and trade offs in order to inform policy makers and practitioners who are concerned with fostering innovative and creative ways to prepare high quality teachers.

  10. The influence of trade associations and group certification programs on the hardwood certification movement

    Science.gov (United States)

    Iris B. Montague

    2013-01-01

    Forest certification has gained momentum around the world over the past two decades. Although there are advantages to being certified, many forest landowners and forest products manufacturers consider forest certification of U.S. forest and forest products unnecessary. Many believe that U.S. forests are already sustainably managed, the current certification systems are...

  11. System 80+{trademark} Standard Design: CESSAR design certification. Volume 8: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 8 provides a description of instrumentation and controls.

  12. System 80+{trademark} Standard Design: CESSAR design certification. Volume 9: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 9 discusses Electric Power and Auxiliary Systems.

  13. System 80+trademark Standard Design: CESSAR design certification. Volume 16

    International Nuclear Information System (INIS)

    1997-01-01

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. This document describes the Combustion Engineering, Inc. System 80+trademark Standard Design. This volume contain Chapter 18 -- Human Factors Engineering. Topics covered include: design team organization and responsibilities; design goals and design bases; design process and application to human factors engineering; functional task analysis; control room configuration; information presentation and panel layout evaluation; control and monitoring outside the main control room; and verification and validation

  14. 13 CFR 121.408 - What are the size procedures for SBA's Certificate of Competency Program?

    Science.gov (United States)

    2010-01-01

    ..., including its affiliates, is small for purposes of the COC program, SBA will process the application for COC... SBA's Certificate of Competency Program? 121.408 Section 121.408 Business Credit and Assistance SMALL... Certificate of Competency Program? (a) A firm which applies for a COC must file an “Application for Small...

  15. A Seven-Step Business Plan Methodology To Develop and Manage Certificate Programs.

    Science.gov (United States)

    Cherif, Karim

    2000-01-01

    Outlines a process for writing a business plan for university certificate programs. The plan's sections include executive summary, rationale and objectives, prospective student profile, external involvement, program characteristics, marketing and promotion, and program administration. (SK)

  16. System 80+trademark standard design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. The documents in this series describe the Combustion Engineering, Inc. System 80+ TM Standard Design

  17. An eCertificate Program in Transportation Planning

    Science.gov (United States)

    2012-08-01

    In this project, researchers developed a proposal to extend the delivery of the recently developed : Graduate Certificate in Transportation Planning at Texas A&M University (TAMU) to a wider audience via : distance education (online or eCertificate)....

  18. 75 FR 57410 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2010-09-21

    ..., regarding the Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products... [Docket No. EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment; Correction AGENCY...

  19. 24 CFR 200.950 - Building product standards and certification program for solar water heating system.

    Science.gov (United States)

    2010-04-01

    ... PROGRAMS Minimum Property Standards § 200.950 Building product standards and certification program for...) concerning labeling of a product, the administrator's validation mark and the manufacturer's certification of... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and...

  20. 24 CFR 200.948 - Building product standards and certification program for carpet cushion.

    Science.gov (United States)

    2010-04-01

    ... Minimum Property Standards § 200.948 Building product standards and certification program for carpet... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and certification program for carpet cushion. 200.948 Section 200.948 Housing and Urban Development Regulations...

  1. 75 FR 64173 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2010-10-19

    ... [Docket No. EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment AGENCY: Office of Energy... notice of proposed rulemaking, regarding the Energy Conservation Program: Certification, Compliance, and...

  2. Interweaving Teaching and Emotional Support for Novice Special Educators in Alternative Certification Programs

    Science.gov (United States)

    Ricci, Leila Ansari; Zetlin, Andrea G.

    2013-01-01

    As the shortage of special education teachers has led to increasing numbers of teacher candidates enrolled in alternative certification programs, there is a need to provide systematic mentoring and coaching. The relationship between support providers and novice teachers enrolled in an alternative certification program in a diverse, urban…

  3. 76 FR 9376 - Proposed Extension of Existing Information Collection on Qualification/Certification Program and...

    Science.gov (United States)

    2011-02-17

    ... Extension of Existing Information Collection on Qualification/Certification Program and Man Hoist Operators... 77.107-1 on Qualification/Certification Program and Man Hoist Operators Physical Fitness. DATES: All... Labor or Secretary of Health and Human Services must make frequent inspections and investigations in...

  4. 75 FR 36157 - Establishment of the Temporary Certification Program for Health Information Technology

    Science.gov (United States)

    2010-06-24

    ... Certification Program for Health Information Technology; Final Rule #0;#0;Federal Register / Vol. 75 , No. 121... Information Technology AGENCY: Office of the National Coordinator for Health Information Technology... certification program for the purposes of testing and certifying health information technology. This final rule...

  5. 75 FR 60773 - Voluntary Private Sector Accreditation and Certification Preparedness Program

    Science.gov (United States)

    2010-10-01

    ...] Voluntary Private Sector Accreditation and Certification Preparedness Program AGENCY: Federal Emergency... concerns in the Voluntary Private Sector Accreditation and Certification Preparedness Program (PS-Prep...-53 (the 9/11 Act) mandated DHS to establish a voluntary private sector preparedness accreditation and...

  6. Development of Mitigation Strategy for Beyond Design Basis External Events for NRC Design Certification

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Hak; Lee, Jae Jong; Kim, Myung Ki [KHNP Central Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    In this study, how to develop FLEX strategy for beyond-design-basis external events for U. S. NRC design certification is examined. The development method of FLEX strategy for U. S. NRC design certification is examined. The applicants should make unit-specific FLEX strategy and establish the minimum coping capabilities consistent with unit-specific evaluation of the potential impacts and responses to BDBEEs. NEI 12-06 outlines the process to define and deploy the diverse and flexible mitigation strategies(FLEX strategy) that will increase defense-in-depth for beyond-design-basis scenarios to address the extended loss of alternating current (ac) power (ELAP) and loss of normal access to the ultimate heat sink (LUHS) occurring simultaneously at all units on a site. The order (EA-12-049) is issued to all reactor licensees, including holders of active, Construction Permit (CP) holders, and Combined License (COL) holders. Applicants for the new reactor design certification should prepare and submit FLEX strategy for NRC staff's review. Site-specific data related with the new reactor can't be determined during the new reactor design certification applications so that the unit-specific FLEX strategy should be developed.

  7. Development of Mitigation Strategy for Beyond Design Basis External Events for NRC Design Certification

    International Nuclear Information System (INIS)

    Kim, Dong Hak; Lee, Jae Jong; Kim, Myung Ki

    2013-01-01

    In this study, how to develop FLEX strategy for beyond-design-basis external events for U. S. NRC design certification is examined. The development method of FLEX strategy for U. S. NRC design certification is examined. The applicants should make unit-specific FLEX strategy and establish the minimum coping capabilities consistent with unit-specific evaluation of the potential impacts and responses to BDBEEs. NEI 12-06 outlines the process to define and deploy the diverse and flexible mitigation strategies(FLEX strategy) that will increase defense-in-depth for beyond-design-basis scenarios to address the extended loss of alternating current (ac) power (ELAP) and loss of normal access to the ultimate heat sink (LUHS) occurring simultaneously at all units on a site. The order (EA-12-049) is issued to all reactor licensees, including holders of active, Construction Permit (CP) holders, and Combined License (COL) holders. Applicants for the new reactor design certification should prepare and submit FLEX strategy for NRC staff's review. Site-specific data related with the new reactor can't be determined during the new reactor design certification applications so that the unit-specific FLEX strategy should be developed

  8. Designing computer programs

    CERN Document Server

    Haigh, Jim

    1994-01-01

    This is a book for students at every level who are learning to program for the first time - and for the considerable number who learned how to program but were never taught to structure their programs. The author presents a simple set of guidelines that show the programmer how to design in a manageable structure from the outset. The method is suitable for most languages, and is based on the widely used 'JSP' method, to which the student may easily progress if it is needed at a later stage.Most language specific texts contain very little if any information on design, whilst books on des

  9. Comparison of University-Based Teacher Certification Programs and Alternative Certification Programs

    Science.gov (United States)

    Roberts, Keonna

    2016-01-01

    The purpose of this qualitative study was to understand further similarities and differences between traditionally certified teachers and alternatively certified teachers specifically in the areas of teacher self-efficacy, classroom management, and teacher perceptions of their preparation program. The following research questions guided this…

  10. Oil spill sorbents: Testing protocol and certification listing program

    International Nuclear Information System (INIS)

    Cooper, D.; Gausemel, I.

    1993-01-01

    Environment Canada's Emergencies Engineering Division is spearheading a program in conjunction with the Canadian General Standards Board that would see the development of a certification and listing program in addition to a national standard for the testing of sorbent materials. Funding for this program is provided by Environment Canada (EC), Canadian Coast Guard (CCG), Marine Spill Response Corporation (MSRC), US Coast Guard (USCG), and US Minerals Management Service (MMS). The test methods are based upon those defined by the American Society for Testing and Materials and previous test methods developed by Environment Canada for our series of reports entitled Selection Criteria and Laboratory Evaluation of Oil Spill Sorbents. This series, which was started in 1975, encompasses a number of commercially available oil spill sorbents tested with different petroleum products and hydrocarbon solvents. The testing program will categorize the sorbents according to their operating characteristics. The main categories are oil spills on water, oil spills on land, and industrial use. The characteristics to be evaluated with the new test protocols include initial and maximum sorption capacities, water pickup, buoyancy, reuse potential, retention profile, disintegration (material integrity), and ease of application and retrieval. In the near future are plans to incorporate changes to the test that would involve increasing the list of test liquids to encompass spills in an industrial setting, in addition to testing sorbent booms and addressing the disposal problem

  11. Certificates.

    Science.gov (United States)

    Fry, F

    1994-06-01

    The Concise Oxford English Dictionary defines 'dilemma' as "an argument forcing one to choose one of two alternatives both unfavourable to him (or her)". This is situation that frequently confronts the general practitioner. In this article a personal solution to the problem of 'certificates' is presented. Not every one will necessarily agree with the solutions presented and some may find them unacceptable, or have better solutions. The author warmly welcomes correspondence, either personal, or in the form of Letters to the Editor, as this is a subject in which consensus decisions are important.

  12. Objective Evaluation in an Online Geographic Information System Certificate Program

    Directory of Open Access Journals (Sweden)

    Scott L. WALKER

    2005-01-01

    Full Text Available Objective Evaluation in an Online Geographic Information System Certificate Program Asst. Professor. Dr. Scott L. WALKER Texas State University-San Marcos San Marcos, Texas, USA ABSTRACT Departmental decisions regarding distance education programs can be subject to subjective decision-making processes influenced by external factors such as strong faculty opinions or pressure to increase student enrolment. This paper outlines an evaluation of a departmental distance-education program. The evaluation utilized several methods that strived to inject objectivity in evaluation and subsequent decision-making. A rapid multi-modal approach included evaluation methods of (1 considering the online psychosocial learning environment, (2 content analyses comparing the online version of classes to face-to-face versions, (3 cost comparisons in online vs. face-to-face classes, (4 student outcomes, (5 student retention, and (6 benchmarking. These approaches offer opportunities for departmental administrators and decision-making committees to make judgments informed by facts rather than being influenced by the emotions, beliefs, or opinions of organizational dynamics.

  13. 78 FR 59981 - Proposed Revision to Physical Security-Standard Design Certification and Operating Reactors

    Science.gov (United States)

    2013-09-30

    ... Design Certification and Operating Reactors AGENCY: Nuclear Regulatory Commission. ACTION: Standard... Design Certification and Operating Reactors.'' The NRC seeks comments on the proposed revised section of... subject): Federal Rulemaking Web site: Go to http://www.regulations.gov and search for Docket ID NRC-2013...

  14. Waste certification program plan for Oak Ridge National Laboratory. Revision 2

    International Nuclear Information System (INIS)

    1997-09-01

    This document defines the waste certification program (WCP) developed for implementation at Oak Ridge National Laboratory (ORNL). The document describes the program structure, logic, and methodology for certification of ORNL wastes. The purpose of the WCP is to provide assurance that wastes are properly characterized and that the Waste Acceptance Criteria (WAC) for receiving facilities are met. The program meets the waste certification requirements for mixed (both radioactive and hazardous) and hazardous ncluding polychlorinated biphenyls (PCB) waste. Program activities will be conducted according to ORNL Level 1 document requirements

  15. 48 CFR 252.225-7035 - Buy American Act-Free Trade Agreements-Balance of Payments Program Certificate.

    Science.gov (United States)

    2010-10-01

    ... Trade Agreements-Balance of Payments Program Certificate. 252.225-7035 Section 252.225-7035 Federal... Trade Agreements—Balance of Payments Program Certificate. As prescribed in 225.1101(10), use the following provision: Buy American Act—Free Trade Agreements—Balance of Payments Program Certificate (DEC...

  16. Evaluation of the U.S. Department of Energy Challenge Home Program Certification of Production Builders

    Energy Technology Data Exchange (ETDEWEB)

    Kerrigan, P.; Loomis, H.

    2014-09-01

    The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America Program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three Cold Climate production builders in three separate US cities. BSC worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Therefore, the resulting design packages do vary from builder to builder. BSC provided support through this research project on the design, construction and performance testing of the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: 1. Adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor; 2. Increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense(R) Efficient Hot Water Distribution requirement.

  17. 76 FR 21813 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2011-04-19

    ..., as set forth below: PART 429--CERTIFICATION, COMPLIANCE, AND ENFORCEMENT FOR CONSUMER PRODUCTS AND...: EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment AGENCY: Office of Energy Efficiency...

  18. 24 CFR 3282.360 - PIA acceptance of product certification programs or listings.

    Science.gov (United States)

    2010-04-01

    ... ENFORCEMENT REGULATIONS Primary Inspection Agencies § 3282.360 PIA acceptance of product certification... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false PIA acceptance of product certification programs or listings. 3282.360 Section 3282.360 Housing and Urban Development Regulations Relating...

  19. 24 CFR 200.947 - Building product standards and certification program for polystyrene foam insulation board.

    Science.gov (United States)

    2010-04-01

    ... INTRODUCTION TO FHA PROGRAMS Minimum Property Standards § 200.947 Building product standards and certification... product, the administrator's certification of compliance with the applicable standards and the type of... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and...

  20. 76 FR 59003 - Energy Conservation Program: Compliance Certification for Electric Motors

    Science.gov (United States)

    2011-09-23

    ... Conservation Program: Compliance Certification for Electric Motors AGENCY: Office of Energy Efficiency and... provides a new means for manufacturers of electric motors and their private labelers to prepare and submit... preferred mechanism for submitting Compliance Certification information for electric motors covered under...

  1. CERTIFICATION - The final and critical stage of every civil or military aviation program

    Directory of Open Access Journals (Sweden)

    Vasile STEFAN

    2012-06-01

    Full Text Available As a general rule the final step in every aviation program is the certification of the airplane, an important step in which the airplane, the engins and the equipments are checked by an authority or commission according to the airworthiness rules. The main scope of the certification is to promote a safe aviation product and to protect the general public from unnecessary risk. In all the contries the national authorieties require a civil certificability for all the parts or equipments and a full aircraft certification for a new or wholly modified airplane. The military aircrafts must pased and respond to a specific way of certification and many actual efforts are done in order to unify the diffrent national rules in this field. This paper presents the existing situation in the certification of civil and military airplans and the actual measures done for the unification of certification procedures in the world.

  2. Member Perceptions of Informal Science Institution Graduate Certificate Program: Case Study of a Community of Practice

    Science.gov (United States)

    Ball, Lois A.

    This research attempted to understand the experiences of a cohort of informal and formal science educators and informal science institution (ISI) community representatives during and after completion of a pilot graduate certificate program. Informal science educators (ISEs) find limited opportunities for professional development and support which influence their contributions to America's science literacy and school science education. This emergent design nested case study described how an innovative program provided professional development and enabled growth in participants' abilities to contribute to science literacy. Data were collected through interviews, participant observations, and class artifacts. The program by design and constituency was the overarching entity that accounted for members' experiences. Three principal aspects of the ISI certificate program and cohort which influenced perceptions and reported positive outcomes were (1) the cohort's composition and their collaborative activities which established a vigorous community of practice and fostered community building, mentoring, and networking, (2) long term program design and implementation which promoted experiential learning in a generative classroom, and (3) ability of some members who were able to be independent or autonomous learners to embrace science education reform strategies for greater self-efficacy and career advancement. This research extends the limited literature base for professional development of informal science educators and may benefit informal science institutions, informal and formal science educators, science education reform efforts, and public education and science-technology-society understanding. The study may raise awareness of the need to establish more professional development opportunities for ISEs and to fund professional development. Further, recognizing and appreciating informal science educators as a diverse committed community of professionals who positively

  3. Waste certification program plan for Oak Ridge National Laboratory. Revision 1

    International Nuclear Information System (INIS)

    Orrin, R.C.

    1997-05-01

    This document defines the waste certification program developed for implementation at Oak Ridge National Laboratory (ORNL). The document describes the program structure, logic, and methodology for certification of ORNL wastes. The purpose of the waste certification program is to provide assurance that wastes are properly characterized and that the Waste Acceptance Criteria (WAC) for receiving facilities are met. The program meets the waste certification requirements outlined in US Department of Energy (DOE) Order 5820.2A, Radioactive Waste Management, and ensures that 40 CFR documentation requirements for waste characterization are met for mixed (both radioactive and hazardous) and hazardous (including polychlorinated biphenyls) waste. Program activities will be conducted according to ORNL Level 1 document requirements

  4. 700 bar hydrogen cylinder design, testing and certification

    International Nuclear Information System (INIS)

    Duncan, M.

    2004-01-01

    'Full text:' Light weight and high pressure cylinders for compressed hydrogen storage are essential components for fuel cell vehicles. Storage volume and mass are two key considerations. Current on-board hydrogen storage systems are based on a maximum pressure of 350 bar. While 350 bar systems are excellent solutions for many applications, some situations required higher storage densities due to space restrictions. As a result significant research and development work has been expended by cylinder manufacturers, systems providers, testing agencies and automotive manufacturers to develop 700 bar systems to reduce storage volume. Dynetek Industries Ltd has proactively developed a range of 700 bar storage cylinders based on a seamless aluminum liner over wrapped with a carbon fiber composite. This paper presents the challenges and processes involved in the design, testing and certification of the Dynetek Industries Ltd 700 bar cylinder. The paper also provides reasoning for further volume and mass optimization of compressed hydrogen cylinders by incorporating realistic cylinder usage parameters into standards. In particular the overly conservative fill life requirement for cylinders will be examined. (author)

  5. 75 FR 61361 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2010-10-05

    .... EERE-2010-BT-CE-0014] RIN 1904-AC24 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment Correction In proposed rule document...

  6. An Alternative Avenue to Teacher Certification: A Cost Analysis of the Pathways to Teaching Careers Program.

    Science.gov (United States)

    Rice, Jennifer King; Brent, Brian O.

    2002-01-01

    Analyzes cost effectiveness of the Pathways to Teaching Careers, a program that supports an alternative route to university-based teacher certification primarily for noncertified teachers, paraprofessionals, and Peace Corps volunteers. (PKP)

  7. Framework for Design of Traceability System on Organic Rice Certification

    Science.gov (United States)

    Purwandoko, P. B.; Seminar, K. B.; Sutrisno; Sugiyanta

    2018-05-01

    Nowadays, the preferences of organic products such as organic rice have been increased. It because of the people awareness of the healthy and eco-friendly food product consumption has grown. Therefore, it is very important to ensure organic quality of the product that will be produced. Certification is a series of process that holds to ensure the quality of products meets all criteria of organic standards. Currently, there is a problem that traceability information system for organic rice certification has been not available. The current system still conducts manually caused the loss of information during storage process. This paper aimed at developing a traceability framework on organic rice certification process. First, the main discussed issues are organic certification process. Second, unified modeling language (UML) is used to build the model of user requirement in order to develop traceability system for all actors in the certification process. Furthermore, the information captured model along certification process will be explained in this paper. The model shows the information flow that has to be recorded for each actor. Finally, the challenges in the implementation system will be discussed in this paper.

  8. Evaluation of the U.S. Department of Energy Challenge Home Program Certification of Production Builders

    Energy Technology Data Exchange (ETDEWEB)

    Kerrigan, P. [Building Science Corporation, Somerville, MA (United States); Loomis, H. [Building Science Corporation, Somerville, MA (United States)

    2014-09-01

    The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three cold climate production builders in three U.S. cities and worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Also, BSC provided support through performance testing of the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor; and increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense® Efficient Hot Water Distribution requirement.

  9. Directory of certificates of compliance for radioactive materials packages: Report of NRC approved quality assurance programs for radioactive material packages

    International Nuclear Information System (INIS)

    1988-12-01

    This directory contains a Report of the US Nuclear Regulatory Commission's Approved Packages (Volume 1), all Certificates of Compliance (Volume 2), and a Report of NRC Approved Quality Assurance Programs (Volume 3) for Radioactive Material Packages effective October 1, 1988. The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volume 2 of the directory. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by Company name is included in the back of Volume 3 for approved QA programs. The Reports include a listing of all users of each package design and approved QA programs prior to the publication date of the directory

  10. How does sustainability certification affect the design process? Mapping final design projects at an architectural office

    DEFF Research Database (Denmark)

    Landgren, Mathilde; Jensen, Lotte Bjerregaard

    2017-01-01

    process and informing the industry of them. This has led to optimised design processes such as Integrated Energy Design, in which many decisions related to energy consumption and indoor climate are made in the early design stages. The current tendency is to use an expanded notion of sustainability......, derived from the sustainability certification system itself, and to apply it even in the early design process. This perspective emphasises all phases of the life cycle of a building. The goal of the present study was to map how a Danish architectural office approached sustainability in the projects......The context of the study is the very strict regulation of energy consumption for operating buildings in Denmark. It is difficult to meet the requirements by system optimisation in the final design phase, so recent research has focused on ways of meeting the target by adapting the whole design...

  11. Review of existing residential energy efficiency certification and rating programs

    Energy Technology Data Exchange (ETDEWEB)

    Hendrickson, P.L.

    1986-11-01

    This report was prepared for the Office of Buildings and Community Systems, US Department of Energy (DOE). The principal objective of the report is to present information on existing Home Energy Rating Systems (HERS) and their features. Much of the information in this report updates a 1982 report (PNL-4359), also prepared by the Pacific Northwest Laboratory (PNL) for DOE. Secondary objectives of the report are to qualitatively examine the benefits and costs of HERS programs, review survey results on the attitudes of various user groups toward the programs, and discuss selected design and implementation issues.

  12. Colleges and Universities with Degree or Certificate Bearing Programs in Creativity

    Science.gov (United States)

    Yudess, Jo

    2010-01-01

    In this article, the author presents a list of colleges and universities with degree or certificate bearing programs in creativity. Since this focuses only on degree bearing programs, an individual might also focus on creativity by working with a specific faculty member in a more general program such as industrial-organizational psychology or…

  13. 76 FR 3540 - U.S. Advanced Boiling Water Reactor Aircraft Impact Design Certification Amendment

    Science.gov (United States)

    2011-01-20

    ... accepted the application as a docketed application for amendment to the U.S. ABWR design certification... perform the design work associated with the amended portion of the U.S. ABWR design represented by STPNOC's application and to supply the amended portion of the U.S. ABWR design. STPNOC's amendment to the U...

  14. 42 CFR 8.11 - Opioid treatment program certification.

    Science.gov (United States)

    2010-10-01

    ... Substances Act (21 U.S.C. 823(g)(1)) to dispense opioid drugs in the treatment of opioid addiction. An OTP... opioid addiction. (2) To obtain certification from SAMHSA, an OTP must meet the Federal opioid treatment... governmental entities to regulate the use of opioid drugs in the treatment of opioid addiction. The provisions...

  15. Assuring the Quality of Licensing and Certification Programs.

    Science.gov (United States)

    Shimberg, Benjamin

    When one considers the importance and social significance of licensing and certification examinations, it is amazing that the enterprise operates with virtually no societal oversight. The "Standards for Educational and Psychological Testing" and the "Code of Fair Testing Practices in Education" of the American Psychological…

  16. Training and Certification Program for Certified Energy Auditors (CEA) and Certified Building Commissioning Professionals (CBCP)

    Energy Technology Data Exchange (ETDEWEB)

    Kent, Bill

    2012-08-24

    The Association of Energy Engineers (AEE) has offered energy efficiency training and certification programs for over 30 years. During that time AEE has certified more than 22,000 professionals. All of our certification programs are the result of extensive industry research and program development and oversight by certification boards. For this project award, AEE proposed to work with the Department of Energy to utilize and extend existing industry recognized Certified Energy Auditor (CEA) and Certified Building Commissioning Professional (CBCP) programs under this Training Program Development Announcement. These expanded training programs will have significant impact in training professionals for building commissioning and energy auditing to achieve the goal of bringing existing buildings up to their optimal energy performance potential and ensuring that new buildings maintain their expected optimal level of performance. The goals and objectives of the training development project were achieved with the development of new training programs that are now being offered as self-sustaining commercial training and certification programs. These new programs are training and certifying professionals who are accomplishing the goal of increasing building energy performance in both existing and new buildings.

  17. Los Alamos National Laboratory transuranic waste characterization and certification program - an overview of capabilities and capacity

    International Nuclear Information System (INIS)

    Rogers, P.S.Z.; Sinkule, B.J.; Janecky, D.R.; Gavett, M.A.

    1997-01-01

    The Los Alamos National Laboratory (LANL) has full capability to characterize transuranic (TRU) waste for shipment to and disposal at the Waste Isolation Pilot Plant (WIPP) for its projected opening. LANL TRU waste management operations also include facilities to repackage both drums of waste found not to be certifiable for WIPP and oversized boxes of waste that must be size reduced for shipment to WIPP. All characterization activities and repackaging are carried out under a quality assurance program designed to meet Carlsbad Area Office (CAO) requirements. The flow of waste containers through characterization operations, the facilities used for characterization, and the electronic data management system used for data package preparation and certification of TRU waste at LANL are described

  18. Waste Certification Program Plan for UT-Battelle, LLC at Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Beierschmitt, K.J.; Downer, K.M.; Hoke, P.B.

    2000-01-01

    This document defines the waste certification program (WCP) developed and implemented by UT-Battelle, LLC (UT-Battelle) at Oak Ridge National Laboratory (ORNL). The WCP applies to all UT-Battelle personnel, it's subcontractors, guests, and visitors that do work at ORNL. This program does not include wastes generated by other U.S. Department of Energy (DOE) prime contractors, their employees, or their subcontractors working on this site except by special arrangement. The document describes the program structure, logic, and methodology for certification of UT-Battelle wastes. The purpose of the WCP is to provide assurance that wastes are properly characterized, that adequate information is provided to enable correct U.S. Department of Transportation (DOT) classification, and that the programmatic certification requirements and the Waste Acceptance Criteria (WAC) for receiving organizations/facilities are met. The program meets the waste certification requirements outlined in DO E Order 435.1, ''Radioactive Waste Management,'' in the DOE Performance Objective for Certification of Non-Radioactive Hazardous Waste (DOE, February 1995), and ensures that 40 Code of Federal Regulations (CFR) documentation requirements for waste characterization are met for mixed (both radioactive and hazardous) and hazardous (including polychlorinated biphenyls (PCBs)) waste. Program activities are conducted according to ORNL directives and guidance.

  19. Directory of national competent authorities' approval certificates for package design and shipment of radioactive material

    International Nuclear Information System (INIS)

    1990-04-01

    The authorization of packages and shipments of radioactive materials are issued in the form of certificates by the national competent authority of the IAEA Member State in which the package is designed or from which a shipment originates, and may be validated or endorsed by the corresponding authority of other Member States as the need arises. This directory summarizes in tabular form the key information on existing package approval certificates contained in PACKTRAM database. 5 tabs

  20. 78 FR 66670 - Housing Counseling Program: New Certification Requirements; Extension of Public Comment Period

    Science.gov (United States)

    2013-11-06

    ... Counseling Program: New Certification Requirements; Extension of Public Comment Period AGENCY: Office of the... inviting public comment on proposed changes to the Housing Counseling Program regulations for the purpose... housing counseling statute. This document announces that HUD is extending the public comment period, for...

  1. Effectiveness of an Alternative Certification Program for the Preparation of Elementary Teachers

    Science.gov (United States)

    Follo, Eric J.; Rivard, James J.

    2009-01-01

    This study focuses on the effectiveness of the alternative elementary teacher certification program at Oakland University in Rochester, Michigan. The program was developed in response to the projected teacher shortage, the need for teachers in subjects such as mathematics and science, the need for teachers in urban schools, and the need for…

  2. 76 FR 1261 - Establishment of the Permanent Certification Program for Health Information Technology

    Science.gov (United States)

    2011-01-07

    ... Certification Program for Health Information Technology; Final Rule #0;#0;Federal Register / Vol. 76, No. 5... Program for Health Information Technology AGENCY: Office of the National Coordinator for Health Information Technology, Department of Health and Human Services. ACTION: Final rule. SUMMARY: This final rule...

  3. Does Teaching Experience Matter? Examining Biology Teachers' Prior Knowledge for Teaching in an Alternative Certification Program

    Science.gov (United States)

    Friedrichsen, Patricia J.; Abell, Sandra K.; Pareja, Enrique M.; Brown, Patrick L.; Lankford, Deanna M.; Volkmann, Mark J.

    2009-01-01

    Alternative certification programs (ACPs) have been proposed as a viable way to address teacher shortages, yet we know little about how teacher knowledge develops within such programs. The purpose of this study was to investigate prior knowledge for teaching among students entering an ACP, comparing individuals with teaching experience to those…

  4. 24 CFR 8.28 - Housing certificate and housing voucher programs.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Housing certificate and housing voucher programs. 8.28 Section 8.28 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development NONDISCRIMINATION BASED ON HANDICAP IN FEDERALLY ASSISTED PROGRAMS AND...

  5. Students' guide to program design

    CERN Document Server

    Robertson, Lesley Anne

    1992-01-01

    Students' Guide to Program Design is a textbook on program design. This textbook approaches program design by using structures programming techniques and pseudocode to develop a solution algorithm. Divided into 10 chapters, the book begins with a basic explanation of structured programming techniques, top-down development, and modular design. This discussion is followed by detailed concepts of the syntax of pseudocode; methods of defining the problem; the application of basic control structures in the development of the solution algorithm; desk checking techniques; hierarchy charts; and module

  6. Video training and certification program improves reliability of postischemic neurologic deficit measurement in the rat.

    Science.gov (United States)

    Taninishi, Hideki; Pearlstein, Molly; Sheng, Huaxin; Izutsu, Miwa; Chaparro, Rafael E; Goldstein, Larry B; Warner, David S

    2016-12-01

    Scoring systems are used to measure behavioral deficits in stroke research. Video-assisted training is used to standardize stroke-related neurologic deficit scoring in humans. We hypothesized that a video-assisted training and certification program can improve inter-rater reliability in assessing neurologic function after middle cerebral artery occlusion in rats. Three expert raters scored neurologic deficits in post-middle cerebral artery occlusion rats using three published systems having different complexity levels (3, 18, or 48 points). The system having the highest point estimate for the correlation between neurologic score and infarct size was selected to create a video-assisted training and certification program. Eight trainee raters completed the video-assisted training and certification program. Inter-rater agreement ( Κ: score) and agreement with expert consensus scores were measured before and after video-assisted training and certification program completion. The 48-point system correlated best with infarct size. Video-assisted training and certification improved agreement with expert consensus scores (pretraining = 65 ± 10, posttraining = 87 ± 14, 112 possible scores, P  0.4 (pretraining = 4, posttraining = 9), and number of categories with an improvement in the Κ: score from pretraining to posttraining (n = 6). Video-assisted training and certification improved trainee inter-rater reliability and agreement with expert consensus behavioral scores in rats after middle cerebral artery occlusion. Video-assisted training and certification may be useful in multilaboratory preclinical studies. © The Author(s) 2015.

  7. Directory of certificates of compliance for radioactive materials packages: Report of NRC approved quality assurance programs for radioactive materials packages

    International Nuclear Information System (INIS)

    1990-10-01

    The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of compliance Number is included at the front of Volume 2 of the directory. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by Company name is included in the back of Volume 3 for approved QA programs. The Reports include a listing of all users of each package design and approved QA programs prior to the publication date of the directory

  8. Directory of certificates of compliance for radioactive materials packages: Report of NRC approved quality assurance programs for radioactive materials packages

    International Nuclear Information System (INIS)

    1989-10-01

    The purpose of this directory is to make available a convenient source of information on packaging which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volume 2 of the directory. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by Company name is included in the back of Volume 3 for approved QA programs. The Reports include a listing of all users of each package design and approved QA programs prior to the publication date of the directory

  9. AutoBayes/CC: Combining Program Synthesis with Automatic Code Certification: System Description

    Science.gov (United States)

    Whalen, Michael; Schumann, Johann; Fischer, Bernd; Clancy, Daniel (Technical Monitor)

    2002-01-01

    Code certification is a lightweight approach to formally demonstrate software quality. It concentrates on aspects of software quality that can be defined and formalized via properties, e.g., operator safety or memory safety. Its basic idea is to require code producers to provide formal proofs that their code satisfies these quality properties. The proofs serve as certificates which can be checked independently, by the code consumer or by certification authorities, e.g., the FAA. It is the idea underlying such approaches as proof-carrying code [6]. Code certification can be viewed as a more practical version of traditional Hoare-style program verification. The properties to be verified are fairly simple and regular so that it is often possible to use an automated theorem prover to automatically discharge all emerging proof obligations. Usually, however, the programmer must still splice auxiliary annotations (e.g., loop invariants) into the program to facilitate the proofs. For complex properties or larger programs this quickly becomes the limiting factor for the applicability of current certification approaches.

  10. The impact of a shade coffee certification program on forest conservation using remote sensing and household data

    International Nuclear Information System (INIS)

    Takahashi, Ryo; Todo, Yasuyuki

    2014-01-01

    In recent years, shade coffee certification programs have attracted increasing attention from forest conservation and development organizations. The certification programs could be expected to promote forest conservation by providing a premium price to shade coffee producers. However, little is known about the significance of the conservation efforts generated by certification programs. In particular, the relationship between the impact of the certification and producer characteristics has yet to be examined. The purpose of this study, which was conducted in Ethiopia, was to examine the impact of a shade coffee certification program on forest conservation and its relationship with the socioeconomic characteristics of the producers. Remote sensing data of 2005 and 2010 was used to gauge the changes in forest area. Employing a probit model, we found that a forest coffee area being certified increased the probability of forest conservation by 19.3 percentage points relative to forest coffee areas lacking certification. We also found that although economically poor producers tended to engage in forest clearing, the forest coffee certification program had a significant impact on these producers. This result suggests that the certification program significantly affects the behaviors of economically poor producers and motivates these producers to conserve the forest. -- Highlights: • We employed the probit mode to evaluate the impact of the shade coffee certification on forest conservation in Ethiopia. • We estimated how the impact of the certification varied among producers with different characteristics. • The certification increased the probability of conserving forest by 19.3 percentage points. • Certification program motivated the economically poor producers to conserve the forest

  11. The impact of a shade coffee certification program on forest conservation using remote sensing and household data

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, Ryo, E-mail: inter.takahashi@gmail.com [Policy Research Center, National Graduate Institute for Policy Studies, 7-22-1, Roppongi, Minato-ku, Tokyo 106-8677 (Japan); Todo, Yasuyuki, E-mail: yastodo@k.u-tokyo.ac.jp [Department of International Studies, University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8563 (Japan)

    2014-01-15

    In recent years, shade coffee certification programs have attracted increasing attention from forest conservation and development organizations. The certification programs could be expected to promote forest conservation by providing a premium price to shade coffee producers. However, little is known about the significance of the conservation efforts generated by certification programs. In particular, the relationship between the impact of the certification and producer characteristics has yet to be examined. The purpose of this study, which was conducted in Ethiopia, was to examine the impact of a shade coffee certification program on forest conservation and its relationship with the socioeconomic characteristics of the producers. Remote sensing data of 2005 and 2010 was used to gauge the changes in forest area. Employing a probit model, we found that a forest coffee area being certified increased the probability of forest conservation by 19.3 percentage points relative to forest coffee areas lacking certification. We also found that although economically poor producers tended to engage in forest clearing, the forest coffee certification program had a significant impact on these producers. This result suggests that the certification program significantly affects the behaviors of economically poor producers and motivates these producers to conserve the forest. -- Highlights: • We employed the probit mode to evaluate the impact of the shade coffee certification on forest conservation in Ethiopia. • We estimated how the impact of the certification varied among producers with different characteristics. • The certification increased the probability of conserving forest by 19.3 percentage points. • Certification program motivated the economically poor producers to conserve the forest.

  12. White certificates — Energy efficiency programs under private information of consumers

    International Nuclear Information System (INIS)

    Wirl, Franz

    2015-01-01

    Energy efficiency is an objective of public interventions at least since the Public Utility Regulatory Policy Act of 1978 (PURPA). Recently, conservation has received considerable attention in the United States and in particular in the European Union but this time in order to mitigate global warming. Policy measures include regulations at the technical level and the introduction of white certificates in order to force utilities and firms to invest into conservation in a way similar to the already existing renewable energy quota. This paper derives the optimal mechanism if utilities must deal with white certificates facing consumers holding private information. The optimal mechanism has some theoretically interesting features like restricted participation and a discontinuity. - Highlights: • Energy efficiency programs are again an objective of public interventions. • White certificates force utilities to invest in conservation. • However, issues of private information are ignored. • Conservation program accounting for private information • The optimal contract has non-standard features like a discontinuity

  13. Evaluation of the certificate in emerging infectious disease research and the certificate in one health training programs, University of Florida

    Directory of Open Access Journals (Sweden)

    Marissa A. Valentine

    2015-03-01

    Full Text Available In developing countries, public health professionals and scientists need targeted training and practical skills to respond to global emerging infectious disease threats. The Certificate in Emerging Infectious Disease Research was developed in 2008 to aid such professionals to respond to complex emerging disease problems. The short-course was modified slightly in 2013 and renamed the Certificate in One Health. To evaluate the immediate impact of the short-course, an online survey of 176 past participants from both the courses was conducted. The survey tool assessed the program’s process, impact, and outcome measures respectively via assessing the courses’ perceived strengths and weaknesses, perceived skills gained, and the participants’ current position, publication status, funding status, and educational attainment; 85 (48.3% participants completed the survey. Reported program strengths included the curriculum, expertise of lecturers, and diversity of the training cohort. The principal reported weakness was the compressed academic schedule. The most frequently reported benefits included: epidemiological and biostatistical skills, followed by One-Health knowledge, and research skills. Twenty-eight percent of the survey respondents reported publishing one or more manuscripts since completing the course and 21% reported receiving research funding. The course appears to have had a positive, immediate impact on the students’ self-perceived knowledge and capabilities.

  14. Program Theory for Participatory Design

    DEFF Research Database (Denmark)

    Bossen, Claus; Dindler, Christian; Iversen, Ole Sejer

    2018-01-01

    How does participatory design work and what are the links between investments in terms of time, people and skills, the processes and the resulting effects? This paper explores program theory as a way for Participatory Design (PD) to investigate and evaluate these issues. Program theory comes out...

  15. 2015 Edition Health Information Technology (Health IT) Certification Criteria, 2015 Edition Base Electronic Health Record (EHR) Definition, and ONC Health IT Certification Program Modifications. Final rule.

    Science.gov (United States)

    2015-10-16

    This final rule finalizes a new edition of certification criteria (the 2015 Edition health IT certification criteria or "2015 Edition'') and a new 2015 Edition Base Electronic Health Record (EHR) definition, while also modifying the ONC Health IT Certification Program to make it open and accessible to more types of health IT and health IT that supports various care and practice settings. The 2015 Edition establishes the capabilities and specifies the related standards and implementation specifications that Certified Electronic Health Record Technology (CEHRT) would need to include to, at a minimum, support the achievement of meaningful use by eligible professionals (EPs), eligible hospitals, and critical access hospitals (CAHs) under the Medicare and Medicaid EHR Incentive Programs (EHR Incentive Programs) when such edition is required for use under these programs.

  16. 76 FR 46202 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2011-08-02

    ... DEPARTMENT OF ENERGY 10 CFR Parts 429 and 430 [Docket No. EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment; Correction Correction In rule document 2011-10401 appearing on pages...

  17. 77 FR 66482 - Federal-State Unemployment Compensation Program: Certifications for 2012 Under the Federal...

    Science.gov (United States)

    2012-11-05

    ... DEPARTMENT OF LABOR Employment and Training Administration Federal-State Unemployment Compensation Program: Certifications for 2012 Under the Federal Unemployment Tax Act AGENCY: Employment and Training... Federal Unemployment Tax Act, 26 U.S.C. 3301 et seq., thereby enabling employers who make contributions to...

  18. 75 FR 68001 - Federal-State Unemployment Compensation Program: Certifications for 2010 under the Federal...

    Science.gov (United States)

    2010-11-04

    ... DEPARTMENT OF LABOR Employment and Training Administration Federal-State Unemployment Compensation Program: Certifications for 2010 under the Federal Unemployment Tax Act AGENCY: Employment and Training... Federal Unemployment Tax Act, 26 U.S.C. 3301 et seq., thereby enabling employers who make contributions to...

  19. 78 FR 67200 - Federal-State Unemployment Compensation Program: Certifications for 2013 Under the Federal...

    Science.gov (United States)

    2013-11-08

    ... DEPARTMENT OF LABOR Employment and Training Administration Federal-State Unemployment Compensation Program: Certifications for 2013 Under the Federal Unemployment Tax Act AGENCY: Employment and Training... Federal Unemployment Tax Act, 26 U.S.C. 3301 et seq., thereby enabling employers who make contributions to...

  20. 76 FR 68790 - Federal-State Unemployment Compensation Program: Certifications for 2011 Under the Federal...

    Science.gov (United States)

    2011-11-07

    ... DEPARTMENT OF LABOR Employment and Training Administration Federal-State Unemployment Compensation Program: Certifications for 2011 Under the Federal Unemployment Tax Act AGENCY: Employment and Training... Federal Unemployment Tax Act, 26 U.S.C. 3301 et seq., thereby enabling employers who make contributions to...

  1. 76 FR 72493 - ITS Joint Program Office Webinar on Alternative Organizational Structures for a Certificate...

    Science.gov (United States)

    2011-11-23

    ... organizational structures for a certificate management entity (CME) to support a trusted and secure connected... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office Webinar on Alternative Organizational... Adam Hopps at (202) 680-0091. The ITS JPO will present results from an early analysis of organizational...

  2. 75 FR 11327 - Proposed Establishment of Certification Programs for Health Information Technology

    Science.gov (United States)

    2010-03-10

    ... Certification Programs for Health Information Technology; Proposed Rule #0;#0;Federal Register / Vol. 75, No. 46... for Health Information Technology AGENCY: Office of the National Coordinator for Health Information... granted to the National Coordinator for Health Information Technology (the National Coordinator) by...

  3. A Model for the Development an Upper-Division Marketing Certificate Program: Professional Sales.

    Science.gov (United States)

    Grahn, Joyce L.

    The sequential components of a model for the development of an upper-division marketing certificate program in professional sales are described in this report as they were implemented at the University of Minnesota's General College during Fall 1980. After introductory material examining the responsibilities of the professional sales…

  4. 76 FR 72636 - Permanent Certification Program for Health Information Technology; Revisions to ONC-Approved...

    Science.gov (United States)

    2011-11-25

    ... Permanent Certification Program for Health Information Technology; Revisions to ONC-Approved Accreditor Processes AGENCY: Office of the National Coordinator for Health Information Technology (ONC), Department of... Coordinator for Health Information Technology by section 3001(c)(5) of the Public Health Service Act (PHSA) as...

  5. 76 FR 31272 - Permanent Certification Program for Health Information Technology; Revisions to ONC-Approved...

    Science.gov (United States)

    2011-05-31

    ... Permanent Certification Program for Health Information Technology; Revisions to ONC-Approved Accreditor Processes AGENCY: Office of the National Coordinator for Health Information Technology (ONC), Department of... Coordinator for Health Information Technology (the National Coordinator) by section 3001(c)(5) of the Public...

  6. 78 FR 40625 - National School Lunch Program: Direct Certification Continuous Improvement Plans Required by the...

    Science.gov (United States)

    2013-07-08

    ... National School Lunch Program: Direct Certification Continuous Improvement Plans Required by the Healthy... Continuous Improvement Plans Required by the Healthy, Hunger-Free Kids Act of 2010'' on February 22, 2013... performance benchmarks and to develop and implement continuous improvement plans if they fail to do so. The...

  7. 75 FR 67992 - Voluntary Private Sector Accreditation and Certification Preparedness Program

    Science.gov (United States)

    2010-11-04

    ... DEPARTMENT OF HOMELAND SECURITY Federal Emergency Management Agency [Docket ID FEMA-2008-0017] Voluntary Private Sector Accreditation and Certification Preparedness Program AGENCY: Federal Emergency... on an initial small business plan to address small business concerns in the Voluntary Private Sector...

  8. Conceptions of Teaching Science Held by Novice Teachers in an Alternative Certification Program

    Science.gov (United States)

    Koballa, Thomas R.; Glynn, Shawn M.; Upson, Leslie

    2005-01-01

    Case studies to investigate the conceptions of teaching science held by three novice teachers participating in an alternative secondary science teacher certification program were conducted, along with the relationships between their conceptions of science teaching and their science teaching practice. Data used to build the cases included the…

  9. 77 FR 76825 - Energy Conservation Program: Certification of Commercial and Industrial HVAC, Refrigeration and...

    Science.gov (United States)

    2012-12-31

    ... Energy Conservation Program: Certification of Commercial and Industrial HVAC, Refrigeration and Water... provisions for commercial refrigeration equipment; commercial heating, ventilating, air-conditioning (HVAC...; commercial HVAC equipment; commercial WH equipment; and walk-in coolers and freezers (June 30 Final Rule). 76...

  10. Advanced Certification Program for Computer Graphic Specialists. Final Performance Report.

    Science.gov (United States)

    Parkland Coll., Champaign, IL.

    A pioneer program in computer graphics was implemented at Parkland College (Illinois) to meet the demand for specialized technicians to visualize data generated on high performance computers. In summer 1989, 23 students were accepted into the pilot program. Courses included C programming, calculus and analytic geometry, computer graphics, and…

  11. Canada's MMP (Maintenance Management Professional) education and certification program

    International Nuclear Information System (INIS)

    Clegg, N.; Rae, V.

    2010-01-01

    'Full text:' Plant Engineering and Maintenance Association of Canada (PEMAC) is a national not-for-profit association providing global leadership, education and certification in world class maintenance, reliability and physical asset management practices. This presentation will introduce the MMP (Maintenance Management Professional) education and certification program and its 8 Modules. You will see the learning elements and learning outcomes of each of the 8 Modules which are delivered through selected colleges, institutes and universities across Canada using in-class, on-site and live, on-line formats in both official languages. (author)

  12. Oak Ridge National Laboratory program plan for certification of nonradioactive hazardous waste

    International Nuclear Information System (INIS)

    1996-05-01

    This document describes Oak Ridge National Laboratory's (ORNL) Program for Certification of Nonradioactive Hazardous Waste (Program). The Program establishes the criteria that will be used by all ORNL divisions, offices, and programs for unrestricted release of hazardous waste to off-site commercial facilities. The certification process meets the requirements given in the Performance Objective for Certification of Non-Radioactive Hazardous Waste. The Program Plan has two main elements: (A) Establishing Radioactive Materials Management Areas (RMMAs). At ORNL, RMMAs are (1) Contamination Areas, High Contamination Areas, and Airborne Radioactivity Areas, (2) Radiological Buffer Areas established for contamination control, and (3) areas posted to prevent loss of control of activated items. (B) Certifying that hazardous waste originating in an RMMA is suitable for commercial treatment, storage, or disposal by process knowledge, surface contamination surveys, sampling and analysis, or a combination of these techniques. If process knowledge is insufficient, the hazardous waste must undergo sampling and analysis in addition to surface contamination surveys. This Program will reduce the impact to current ORNL operations by using current radiological area boundaries and existing plans and procedures to the greatest extent possible. New or revised procedures will be developed as necessary to implement this Program

  13. Impact of dynamic certification requirements on the Nuclear Materials Technology Division's transuranic waste management program

    International Nuclear Information System (INIS)

    Balkey, J.J.; Montoya, A.J.; Wieneke, Ronald E.

    2002-01-01

    The issuance of the Waste Isolation Pilot Plant's (WIPP) Hazardous Waste Facility Permit in August of 2000, specifically the attachment I3 Waste Analysis Plan (WAP),had a profound impact upon transuranic (TRU) waste certification at Los Alamos National Laboratory's (LANL) Plutonium Facility. Program certification was lost until Laboratory internal program documents could be amended to meet the new WAP requirements, waste management personnel could be retrained to incorporate the changes into waste operations and the entire program successfully pass subsequent Carlsbad Field Ofice (CBFO) audit. This action resulted in the suspension of transuranic waste shipments from LANL to WIPP. In addition the changes unnecessarily increased the complexity of TRU waste program activities in waste handling.

  14. Discussion on the Criterion for the Safety Certification Basis Compilation - Brazilian Space Program Case

    Science.gov (United States)

    Niwa, M.; Alves, N. C.; Caetano, A. O.; Andrade, N. S. O.

    2012-01-01

    The recent advent of the commercial launch and re- entry activities, for promoting the expansion of human access to space for tourism and hypersonic travel, in the already complex ambience of the global space activities, brought additional difficulties over the development of a harmonized framework of international safety rules. In the present work, with the purpose of providing some complementary elements for global safety rule development, the certification-related activities conducted in the Brazilian space program are depicted and discussed, focusing mainly on the criterion for certification basis compilation. The results suggest that the composition of a certification basis with the preferential use of internationally-recognized standards, as is the case of ISO standards, can be a first step toward the development of an international safety regulation for commercial space activities.

  15. Enforcement/certification program for appliance efficiency standards. Task II, report

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-28

    The research and analysis program at Vitro Labs. in support of the appliance certification and enforcement program provides Vitro's recommended approach to appliance certification and enforcement (C/E). The approach established the C/E program framework, general criteria, and procedures for assuring a specified level of energy-efficiency performance for 13 categories of consumer products (furnaces, humidifiers, dehumidifiers, dishwashers, television, clothes washers, freezers, air conditioners, stoves, refrigerators, water heaters). Section 2 summarizes the recommended approach. Section 3 contains detailed evaluations and comparisons for four independent alternative approaches considered (minimal government intevention, strong certification control, strong enforcement audit, and mixed certification/enforcement). The fifth C/E approach (strong remedy/deterrent) involves the remedies available to the government should non-compliance be discovered and could affect the choice among the approaches, but this approach has not been evaluated. Section 4 summarizes the analysis methodology used to select the recommended approach. Additional information is provided in 6 appendices.

  16. Sustainability certification systems as guidelines for early-phase urban design processes

    OpenAIRE

    Jensen, Lotte Bjerregaard; Bjerre, Lærke; Mansfelt, Lise

    2016-01-01

    The German Sustainable Building Council (Deutsche Gesellschaft für Nachhaltiges Bauen or DGNB) has one of the most comprehensive sustainability certification systems for urban districts (UD). Their explicit aim is that the system should impact the very earliest design decisions. The Technical University of Denmark has tested the DGNB-UD system in two experimental design projects for similar locations to find out how it can be used in the early-phase design process. This paper describes these ...

  17. Supporting medical education research quality: the Association of American Medical Colleges' Medical Education Research Certificate program.

    Science.gov (United States)

    Gruppen, Larry D; Yoder, Ernie; Frye, Ann; Perkowski, Linda C; Mavis, Brian

    2011-01-01

    The quality of the medical education research (MER) reported in the literature has been frequently criticized. Numerous reasons have been provided for these shortcomings, including the level of research training and experience of many medical school faculty. The faculty development required to improve MER can take various forms. This article describes the Medical Education Research Certificate (MERC) program, a national faculty development program that focuses exclusively on MER. Sponsored by the Association of American Medical Colleges and led by a committee of established medical education researchers from across the United States, the MERC program is built on a set of 11 interactive workshops offered at various times and places across the United States. MERC participants can customize the program by selecting six workshops from this set to fulfill requirements for certification. This article describes the history, operations, current organization, and evaluation of the program. Key elements of the program's success include alignment of program content and focus with needs identified by prospective users, flexibility in program organization and logistics to fit participant schedules, an emphasis on practical application of MER principles in the context of the participants' activities and interests, consistency in program content and format to ensure standards of quality, and a sustainable financial model. The relationship between the national MERC program and local faculty development initiatives is also described. The success of the MERC program suggests that it may be a possible model for nationally disseminated faculty development programs in other domains.

  18. 78 FR 69139 - Physical Security-Design Certification and Operating Reactors

    Science.gov (United States)

    2013-11-18

    ... Operating Reactors AGENCY: Nuclear Regulatory Commission. ACTION: Standard review plan--draft section..., ``Physical Security--Design Certification and Operating Reactors.'' The public comment period was originally....regulations.gov and search for Docket ID NRC-2013-0225. Address questions about NRC dockets to Carol Gallagher...

  19. Sustainability certification systems as guidelines for early-phase urban design processes

    DEFF Research Database (Denmark)

    Jensen, Lotte Bjerregaard; Bjerre, Lærke; Mansfelt, Lise

    2016-01-01

    The German Sustainable Building Council (Deutsche Gesellschaft für Nachhaltiges Bauen or DGNB) has one of the most comprehensive sustainability certification systems for urban districts (UD). Their explicit aim is that the system should impact the very earliest design decisions. The Technical...

  20. The design of the MAD Design Program

    International Nuclear Information System (INIS)

    Niederer, J.

    1992-01-01

    The study of long term stability in particle accelerators has long been served by a group of widely circulated computer programs. The progress in these programs has mirrored the growth and versatility in accelerator size, complexity, and purpose, as well as evolving technologies in computing software and hardware. A number of large accelerator projects during the last decade were designed with the aid of physics programs either written for, or tailored for the project at hand, each invariably benefiting from contributions of previous workers. This paper outlines the recent history of of expample of an accelerator lattice model tool kit, the Methodical Accelerator Design (MAD) Program, which has tried to knit together this collective wisdom of the accelerator community, The ideas behind the software design of the program itself are traced here; the accelerator physics contents and origins are thoroughly documented elsewhere. These informal notes have a Brookhaven flavor, in part because of early BNL efforts to generalize the ways that technical problems are organized and presented to computers. Some recent BNL applications not covered in the extensive CERN documentation are also included

  1. 78 FR 25943 - Changes to Scrapie Flock Certification Program

    Science.gov (United States)

    2013-05-03

    ... Health Programs, VS, APHIS, 4700 River Road Unit 39, Riverdale, MD 20737-1231; (301) 851-3497... systems of sheep and goats. It belongs to a group of diseases called transmissible spongiform... voluntary program within the broader NSEP. Producers who elect to join the SFCP agree to follow a set of...

  2. Directory of certificates of compliance for radioactive materials packages. Volume 3, revision 1. Summary report of NRC approved quality assurance programs for radioactive material packages

    International Nuclear Information System (INIS)

    1981-12-01

    The directory contains a Summary Report of NRC approved Packages (Volume 1), Certificates of Compliance (Volume 2), and a Summary Report of NRC Approved Quality Assurance Programs for Radioactive Material Packages (Volume 3). The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the U.S. Nuclear Regulatory Commission. To assist in identifying packaging, and index by Model Number and corresponding Certificate of Compliance number is included at the back of each volume of the directory. The Summary Report includes a listing of all users of each package design prior to the publication date of the directory

  3. 24 CFR 200.949 - Building product standards and certification program for exterior insulated steel door systems.

    Science.gov (United States)

    2010-04-01

    ... INTRODUCTION TO FHA PROGRAMS Minimum Property Standards § 200.949 Building product standards and certification... product, the administrator's certification of compliance with the applicable standards is required to be... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and...

  4. 24 CFR 200.946 - Building product standards and certification program for exterior finish and insulation systems...

    Science.gov (United States)

    2010-04-01

    ... product standards and certification program for exterior finish and insulation systems, use of Materials... product, the administrator's validation mark and the manufacturer's certification of compliance with the... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and...

  5. An Analysis of the Efficacy Beliefs of Special Education Teachers Completing the Alternative versus the Traditional Certification Programs

    Science.gov (United States)

    Beasley, Thomas Hunter

    2012-01-01

    This study investigated the efficacy beliefs of two groups of special education teachers who had completed certification requirements in mild/moderate disabilities. The first group included 26 special education teachers who had completed an alternative certification program at a midsize public university in Louisiana between 2003 and 2008. The…

  6. The successful management of programs for human factors certification of advanced aviation technologies

    Science.gov (United States)

    Baldwin, Rod

    1994-01-01

    In recent years there have been immense pressures to enact changes on the air traffic control organizations of most states. In addition, many of these states are or have been subject to great political, sociological and economic changes. Consequently, any new schemes must be considered within the context of national or even international changes. Europe has its own special problems, and many of these are particularly pertinent when considering human factors certification programs. Although these problems must also be considered in the wider context of change, it is usually very difficult to identify which forces are pressing in support of human factors aspects and which forces are resisting change. There are a large number of aspects which must be taken into account if human factors certification programs are to be successfully implemented. Certification programs would be new ventures, and like many new ventures it will be essential to ensure that managers have the skills, commitment and experience to manage the programs effectively. However, they must always be aware of the content and the degree of certainty to which the human factors principles can be applied - as Debons and Horne have carefully described. It will be essential to avoid the well known pitfalls which occur in the implementation of performance appraisal schemes. While most appraisal schemes are usually extremely well thought out, they often do not produce good results because they are not implemented properly and staff therefore do not have faith in them. If the manager does not have the commitment and interest in his/her staff as human beings, then the schemes will not be effective. Thus, one aspect of considering human factors certification schemes is within the context of a managed organization. This paper outlines some of the management factors which need to be considered for the air traffic control services. Many of the points received attention during the plenary sessions while others were

  7. Training and certification program of the operating staff for a 90-day test of a regenerative life support system

    Science.gov (United States)

    1972-01-01

    Prior to beginning a 90-day test of a regenerative life support system, a need was identified for a training and certification program to qualify an operating staff for conducting the test. The staff was responsible for operating and maintaining the test facility, monitoring and ensuring crew safety, and implementing procedures to ensure effective mission performance with good data collection and analysis. The training program was designed to ensure that each operating staff member was capable of performing his assigned function and was sufficiently cross-trained to serve at certain other positions on a contingency basis. Complicating the training program were budget and schedule limitations, and the high level of sophistication of test systems.

  8. AP600 design certification thermal hydraulics testing and analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hochreiter, L.E.; Piplica, E.J.

    1995-09-01

    Westinghouse Electric Corporation, in conjunction with the Department of Energy and the Electric Power Research Institute, have been developing an advanced light water reactor design; the AP600. The AP600 is a 1940 Mwt, 600Mwe unit which is similar to a Westinghouse two-loop Pressurized Water Reactor. The accumulated knowledge on reactor design to reduce the capital costs, construction time, and the operational and maintenance cost of the unit once it begins to generate electrical power. The AP600 design goal is to maintain an overall cost advantage over fossil generated electrical power.

  9. Waste management/waste certification plan for the Oak Ridge National Laboratory Environmental Restoration Program

    International Nuclear Information System (INIS)

    Clark, C. Jr.; Hunt-Davenport, L.D.; Cofer, G.H.

    1995-03-01

    This Waste Management/Waste Certification (C) Plan, written for the Environmental Restoration (ER) Program at Oak Ridge National Laboratory (ORNL), outlines the criteria and methodologies to be used in the management of waste generated during ORNL ER field activities. Other agreed upon methods may be used in the management of waste with consultation with ER and Waste Management Organization. The intent of this plan is to provide information for the minimization, handling, and disposal of waste generated by ER activities. This plan contains provisions for the safe and effective management of waste consistent with the U.S. Environmental Protection Agency's (EPA's) guidance. Components of this plan have been designed to protect the environment and the health and safety of workers and the public. It, therefore, stresses that investigation derived waste (IDW) and other waste be managed to ensure that (1) all efforts be made to minimize the amount of waste generated; (2) costs associated with sampling storage, analysis, transportation, and disposal are minimized; (3) the potential for public and worker exposure is not increased; and (4) additional contaminated areas are not created

  10. 75 FR 48329 - Tribal Drinking Water Operator Certification Program

    Science.gov (United States)

    2010-08-10

    ... operator has the skills, knowledge, education and experience necessary to deliver safe water supporting... demonstrates the operator has the skills, knowledge, education and experience necessary to deliver safe water... this program can be found at http://www.epa.gov/safewater/tribal.html . 2. Hard Copies. Hard copies of...

  11. Automated Manufacturing/Robotics Technology: Certificate and Associate Degree Programs.

    Science.gov (United States)

    McQuay, Paul L.

    A description is provided of the Automated Manufacturing/Robotics program to be offered at Delaware County Community College beginning in September 1984. Section I provides information on the use of reprogramable industrial robots in manufacturing and the rapid changes in production that can be effected through the application of automated…

  12. Asnuntuck Community College's Machine Technology Certificate and Degree Programs.

    Science.gov (United States)

    Irlen, Harvey S.; Gulluni, Frank D.

    2002-01-01

    States that although manufacturing remains a viable sector in Connecticut, it is experiencing skills shortages in the workforce. Describes the machine technology program's purpose, the development of the Asnuntuck Community College's (Connecticut) partnership with private sector manufacturers, the curriculum, the outcomes, and benefits of…

  13. System 80+ instrumentation and controls - certification of a reliable design

    International Nuclear Information System (INIS)

    Matzie, R.A.; Scarola, K.; Turk, R.S.

    1993-01-01

    ABB Combustion Engineering's (ABB) System 80+ advanced light water plant design includes a modern, fully digitized instrumentation and controls complex, Nuplex 80+. This complex incorporates an evolutionary advanced control room, replacing conventional analog instruments with more capable computer driven components. As a result, Nuplex 80+ results in significant improvements in operator information handling and control to enhance plant safety and availability. The design implements features which the U.S. NRC has determined to be acceptable for addressing the potential for common mode failure in software implemented for protective functions. (author)

  14. 76 FR 10269 - AP1000 Design Certification Amendment

    Science.gov (United States)

    2011-02-24

    ... (Chapter 3), instrumentation and control (I&C) systems (Chapter 7) and human factors engineering (HFE... proposed such changes. Once the NRC was satisfied with these DCD markups, they were documented in the... FSER. This chapter indicates which areas of the DCD are affected by each design change and the letters...

  15. Electric and hybrid vehicle self-certification and verification procedures: Market Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-03-01

    The process by which a manufacturer of an electric or hybrid vehicle certifies that his vehicle meets the DOE Performance Standards for Demonstration is described. Such certification is required for any vehicles to be purchased under the Market Demonstration Program. It also explains the verification testing process followed by DOE for testing to verify compliance. Finally, the document outlines manufacturer responsibilities and presents procedures for recertification of vehicles that have failed verification testing.

  16. [History of training and certification programs of medical specialists in Peru].

    Science.gov (United States)

    Burstein Alva, Zuño

    2014-01-01

    In this paper, historical reference is made about legal provisions for recognition of the training and certification of medical specialists in Peru through university programs provided since 1928 and culminating in 1973 with the legal authorization by the relevant state authority to implement the Second Specialization Program in Human Medicine and to grant the Certification of Specialist in the Name of the Nation upon completion of a university residency program and specialized training by the “regular modality”, and the recognition by the university with the “non-regular modality”. In Peru it has been established to the present that the Professional Certifications of Specialists in Human Medicine “in the Name of the Nation”, both in “regular modality” as well as in “non-regular modality”, can only be granted by public or private universities authorized for this mission and, besides, no other public or private institution can claim this role that corresponds exclusively for the Peruvian University.

  17. Nuclear methods - an integral part of the NBS certification program

    International Nuclear Information System (INIS)

    Gills, T.E.

    1984-01-01

    Within the past twenty years, new techniques and methods have emerged in response to new technologies that are based upon the performance of high-purity and well-characterized materials. The National Bureau of Standards, through its Standard Reference Materials (SRM's) Program, provides standards in the form of many of these materials to ensure accuracy and the compatibility of measurements throughout the US and the world. These standards, defined by the National Bureau of Standards as Standard Reference Materials (SRMs), are developed by using state-of-the-art methods and procedures for both preparation and analysis. Nuclear methods-activation analysis constitute an integral part of that analysis process

  18. Swedish-Norwegian tradable green certificates: Scheme design flaws and perceived investment barriers

    International Nuclear Information System (INIS)

    Linnerud, Kristin; Simonsen, Morten

    2017-01-01

    The EU Commission recommends using market-based support schemes for renewable-electricity projects. One example is the Swedish-Norwegian tradable green certificate scheme. We examine whether design features in the Norwegian part of this scheme, specifically, the scheme's short duration and the way it is to be abruptly terminated, contribute to investors' perceptions of barriers. We apply econometric techniques on primary data collected in two surveys of Norwegian investors in hydropower, and we use real options theory to predict and interpret investors' responses. We show that: (1) immediately after the scheme was introduced, investors are eager to lock in future subsidies by investing immediately and concerned with factors that may delay the completion of their projects; (2) as the certificate deadline neared, investors have become increasingly pessimistic and concerned with economic and risk barriers. Investors in big hydropower plants with regulation reservoirs are particularly concerned with the risk of not completing their projects in time to gain the right to sell certificates. These findings are consistent with the predicted responses to the scheme design derived from real options theory. In contrast to earlier studies, we find no difference in responses to the scheme design across investor types. - Highlights: • The Swedish-Norwegian tradable green certificate scheme is intended to promote cost-efficiency. • We examine the optimism about and barriers against investing in new hydropower projects in Norway. • We find that scheme design may have contributed to barriers against Norwegian hydropower projects. • Thus, scheme design flaws may have prevented the scheme from working as intended. • These findings are consistent with real options theory predictions.

  19. Programming languages for circuit design.

    Science.gov (United States)

    Pedersen, Michael; Yordanov, Boyan

    2015-01-01

    This chapter provides an overview of a programming language for Genetic Engineering of Cells (GEC). A GEC program specifies a genetic circuit at a high level of abstraction through constraints on otherwise unspecified DNA parts. The GEC compiler then selects parts which satisfy the constraints from a given parts database. GEC further provides more conventional programming language constructs for abstraction, e.g., through modularity. The GEC language and compiler is available through a Web tool which also provides functionality, e.g., for simulation of designed circuits.

  20. Design Minimalism in Robotics Programming

    Directory of Open Access Journals (Sweden)

    Anthony Cowley

    2008-11-01

    Full Text Available With the increasing use of general robotic platforms in different application scenarios, modularity and reusability have become key issues in effective robotics programming. In this paper, we present a minimalist approach for designing robot software, in which very simple modules, with well designed interfaces and very little redundancy can be connected through a strongly typed framework to specify and execute different robotics tasks.

  1. Design Minimalism in Robotics Programming

    Directory of Open Access Journals (Sweden)

    Anthony Cowley

    2006-03-01

    Full Text Available With the increasing use of general robotic platforms in different application scenarios, modularity and reusability have become key issues in effective robotics programming. In this paper, we present a minimalist approach for designing robot software, in which very simple modules, with well designed interfaces and very little redundancy can be connected through a strongly typed framework to specify and execute different robotics tasks.

  2. Permanent certification program for health information technology; revisions to ONC-Approved Accreditor processes. Final rule.

    Science.gov (United States)

    2011-11-25

    Under the authority granted to the National Coordinator for Health Information Technology by section 3001(c)(5) of the Public Health Service Act (PHSA) as added by the Health Information Technology for Economic and Clinical Health (HITECH) Act, this final rule establishes a process for addressing instances where the ONC-Approved Accreditor (ONC-AA) engages in improper conduct or does not perform its responsibilities under the permanent certification program. This rule also addresses the status of ONC-Authorized Certification Bodies (ONC-ACBs) in instances where there may be a change in the accreditation organization serving as the ONC-AA and clarifies the responsibilities of the new ONC-AA.

  3. The Development of a Post-Baccalaureate Certificate Program in Molecular Diagnostics

    Science.gov (United States)

    Williams, Gail S.; Brown, Judith D.; Keagle, Martha B.

    2000-01-01

    A post-baccalaureate certificate program in diagnostic molecular sciences was created in 1995 by the Diagnostic Genetic Sciences Program in the School of Allied Health at the University of Connecticut. The required on-campus lecture and laboratory courses include basic laboratory techniques, health care issues, cell biology, immunology, human genetics, research, management, and molecular diagnostic techniques and laboratory in molecular diagnostics. These courses precede a 6-month, full-time practicum at an affiliated full-service molecular laboratory. The practicum includes amplification and blotting methods, a research project, and a choice of specialized electives including DNA sequencing, mutagenesis, in situ hybridization methods, or molecular diagnostic applications in microbiology. Graduates of the program are immediately eligible to sit for the National Credentialing Agency examination in molecular biology to obtain the credential Clinical Laboratory Specialist in Molecular Biology (CLSp(MB). This description of the University of Connecticut program may assist other laboratory science programs in creating similar curricula. PMID:11232107

  4. Directory of Certificates of Compliance for Radioactive-Materials Packages. Summary report of NRC approved quality assurance programs for radioactive material packages

    International Nuclear Information System (INIS)

    1983-01-01

    This directory contains a Summary Report of the US Nuclear Regulatory Commission's Approved Packages (Volume I), all Certificates of Compliance (Volume 2), and Summary Report of NRC Approved Quality Assurance Programs (Volume 3) for Radioactive Material Packages effective December 31, 1982. The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the back of Volumes 1 and 2 of the directory. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by Company name is included in the back of Volume 3 for approved QA programs. The Summary Reports include a listing of all users of each package design and approved QA programs prior to the publication date of the directory

  5. 75 FR 652 - Energy Conservation Program: Certification, Compliance, and Enforcement Requirements for Certain...

    Science.gov (United States)

    2010-01-05

    ...; Comment Request; Certification, Compliance, and Enforcement Requirements for Consumer Products and Certain...: Certification, Compliance, and Enforcement Requirements for Certain Consumer Products and Commercial and... certification, compliance, and enforcement requirements for various consumer products and commercial and...

  6. The U.S. Department of Labor's Tractor and Machinery Certification Program: management styles and perceptions held by community stakeholders and instructors.

    Science.gov (United States)

    Jepsen, S D

    2012-07-01

    A mixed-mode, descriptive study was conducted on the U.S. Department of Labor's (DOL) Tractor and Machinery Certification Program. Legislated by the Fair Labors Standards Act, the Hazardous Occupations Order in Agriculture (HOOA) was enacted in 1968 as a public policy measure to reduce the number of injuries to youth on farms. An educational exemption allows youth 14 and 15 years of age to work for hire after they successfully complete a training program. In the 40+ years since the legislation went into effect prescribing such training exemptions, deficiencies and variations have occurred in the quality of the educational program and the system by which agencies certify young people. To gain a better understanding of the DOL Tractor and Machinery Certification program, community stakeholders were asked to identify management practices, curriculum resources, and perceptions of the DOL program. The study design used qualitative data from 49 agricultural representatives participating in regional focus groups and quantitative data from 330 community instructors responding to an electronic-formatted questionnaire (representing a 70.7% response rate) in an effort to answer the question: "What is the current status of the DOL Tractor and Machinery Certification program in the United States?" The findings revealed that 55.2% of the instructors taught a qualifying DOL program. Of these, the certification was administered through an Extension or 4-H program (68.7%), an agricultural education program (24.7%), or as a combination of Extension and agricultural education (6.0%). Course instructors believed the training was beneficial to students and had opportunity to attract more students than currently enrolled These instructors placed a higher value on standardized teaching materials than on standardized testing procedures; they also supported the need for additional teaching aids, which included hands-on activities, videotapes, student workbooks, and DVDs. Study participants

  7. Perspectives on Teaching from Alternative Certification Teachers from Diverse Backgrounds

    Science.gov (United States)

    Evans, Brian R.

    2014-01-01

    This article presents an interview with five teachers in an alternative certification program at a university in New York. All of the teachers were from the New York City Teaching Fellows (NYCTF) program, which is an alternative certification program in New York designed to quickly place teachers in high need schools throughout the city. The…

  8. Use of phenomena identification and ranking (PIRT) process in research related to design certification of the AP600 advanced passive light water reactor (LWR)

    International Nuclear Information System (INIS)

    Wilson, G.E.; Fletcher, C.D.; Eltawila, F.

    1996-01-01

    The AP600 LWR is a new advanced passive design that has been submitted to the USNRC for design certification. Within the certification process the USNRC will perform selected system thermal hydraulic response audit studies to help confirm parts of the vendor's safety analysis submittal. Because of certain innovative design features of the safety systems, new experimental data and related advances in the system thermal hydraulic analysis computer code are being developed by the USNRC. The PIRT process is being used to focus the experimental and analytical work to obtain a sufficient and cost effective research effort. The objective of this paper is to describe the application and most significant results of the PIRT process, including several innovative features needed in the application to accommodate the short design certification schedule. The short design certification schedule has required that many aspects of the USNRC experimental and analytical research be performed in parallel, rather than in series as was normal for currently operating LWRS. This has required development and use of management techniques that focus and integrate the various diverse parts of the research. The original PIRTs were based on inexact knowledge of an evolving reactor design, and concentrated on the new passive features of the design. Subsequently, the PIRTs have evolved in two more stages as the design became more firm and experimental and analytical data became available. A fourth and final stage is planned and in progress to complete the PIRT development. The PIRTs existing at the end of each development stage have been used to guide the experimental program, scaling analyses and code development supporting the audit studies

  9. Student Focused Geospatial Curriculum Initiatives: Internships and Certificate Programs at NCCU

    Science.gov (United States)

    Vlahovic, G.; Malhotra, R.

    2009-12-01

    This paper reports recent efforts by the Department of Environmental, Earth and Geospatial Sciences faculty at North Carolina Central University (NCCU) to develop a leading geospatial sciences program that will be considered a model for other Historically Black College/University (HBCU) peers nationally. NCCU was established in 1909 and is the nation’s first state supported public liberal arts college funded for African Americans. In the most recent annual ranking of America’s best black colleges by the US News and World Report (Best Colleges 2010), NCCU was ranked 10th in the nation. As one of only two HBCUs in the southeast offering an undergraduate degree in Geography (McKee, J.O. and C. V. Dixon. Geography in Historically Black Colleges/ Universities in the Southeast, in The Role of the South in Making of American Geography: Centennial of the AAG, 2004), NCCU is uniquely positioned to positively affect talent and diversity of the geospatial discipline in the future. Therefore, successful creation of research and internship pathways for NCCU students has national implications because it will increase the number of minority students joining the workforce and applying to PhD programs. Several related efforts will be described, including research and internship projects with Fugro EarthData Inc., Center for Remote Sensing and Mapping Science at the University of Georgia, Center for Earthquake Research and Information at the University of Memphis and the City of Durham. The authors will also outline requirements and recent successes of ASPRS Provisional Certification Program, developed and pioneered as collaborative effort between ASPRS and NCCU. This certificate program allows graduating students majoring in geospatial technologies and allied fields to become provisionally certified by passing peer-review and taking the certification exam. At NCCU, projects and certification are conducted under the aegis of the Geospatial Research, Innovative Teaching and

  10. Deconstructing Teacher Certification

    Science.gov (United States)

    Baines, Lawrence A.

    2006-01-01

    In this article, the author takes a close look at alternative certification programs and is convinced that, because they vary so extremely in their requirements, all of them cannot possibly be producing highly qualified teachers. Here, he talks about Non-University Certification Programs (NUCPs). These are alternative certification programs that…

  11. Impact of standards and certification on environmental impairment liability insurance programs

    International Nuclear Information System (INIS)

    Gulledge, W.P.

    1993-01-01

    Environmental impairment liability (EIL) insurance is available for petroleum storage tank and other environmental exposures. Recent standards and performance criteria for leak detection for underground storage tanks (USTs) and other technical standards for USTs have been both a benefit and an interference to risk-based underwriting of storage tank EIL insurance programs. Insurance underwriters and state financial responsibility program administrators are confronted with confusing information to manage these environmental risks. Standards and certification are also key issues for site assessment programs. Recent activities from ASTM and the Institute for Environmental Auditing (IEA) have addressed the need to increase the professional stature of site assessments and environmental management. Reaction and acceptance of these efforts by the users have been mixed. Ultimately, these efforts will greatly impact insurance coverage for environmental risks

  12. The impact of an immunization training certificate program on the perceived knowledge, skills and attitudes of pharmacy students toward pharmacy-based immunizations

    Directory of Open Access Journals (Sweden)

    Marcum ZA

    2010-06-01

    Full Text Available Objective: To assess the impact of a national immunization training certificate program on the perceived knowledge, skills and attitudes of pharmacy students toward pharmacy-based immunizations.Methods: The study design utilized a pre- and post-survey administered to pharmacy students before and after the American Pharmacists Association’s (APhA Pharmacy-Based Immunization Delivery program. The primary outcome explored was a change in the perceived knowledge, skills, and attitudes of the pharmacy students. A five-point Likert scale (i.e. strongly agree = 5, strongly disagree = 1 was used for measuring the main outcomes, which was summated by adding the individual item scores in each section to form a composite score for each outcome. Results: The certificate training program resulted in a significant improvement in knowledge (38.5% increase in score, p<0.001 and skills (34.5% increase in score, p<0.001, but not attitudes (1% increase in score, p=0.210.Conclusions: The national immunization training certificate program had a positive impact on the perceived knowledge and skills of pharmacy students. However, no change was observed regarding students’ perceived attitudes toward pharmacy-based immunizations.

  13. Structural and piping issues in the design certification of advanced reactors

    International Nuclear Information System (INIS)

    Ali, S.A.; Terao, D.; Bagchi, G.

    1996-01-01

    The purpose of this paper is to discuss the design certification of structures and piping for evolutionary and passive advanced light water reactors. Advanced reactor designs are based on a set of assumed site-related parameters that are selected to envelop a majority of potential nuclear power plant sites. Multiple time histories are used as the seismic design basis in order to cover the majority of potential sites in the US. Additionally, design are established to ensure that surface motions at a particular site will not exceed the enveloped standard design surface motions. State-of-the-art soil-structure interaction (SSI) analyses have been performed for the advanced reactors, which include structure-to-structure interaction for all seismic Category 1 structures. Advanced technology has been utilized to exclude the dynamic effects of pipe rupture from structural design by demonstrating that the probability of pipe rupture is extremely low. For piping design, the advanced reactor vendors have developed design acceptance criteria (DAC) which provides the piping design analysis methods, design procedures, and acceptance criteria. In SECY-93-087 the NRC staff recommended that the Commission approve the approach to eliminate the OBE from the design of structures and piping in advanced reactors and provided guidance which identifies the necessary changes to existing seismic design criteria. The supplemental criteria address fatigue, seismic anchor motion, and piping stress limits when the OBE is eliminated

  14. Design and Certification of Targets for Drop Tests at the NTRC Packaging Research Facility

    International Nuclear Information System (INIS)

    Ludwig, S.B.

    2003-01-01

    This report provides documentation of the design and certification of drop pad (targets) at the National Transportation Research Center (NTRC) Packaging Research Facility(PRF). Based on the evaluation performed, it has been demonstrated that the small (interior) drop pad (target) meets the regulatory definition of a flat, essentially unyielding, horizontal surface for packages weighing up to 3,150 lb (1,432 kg). The large (exterior) drop pad (target) meets the regulatory definition of a flat, essentially unyielding, horizontal surface for packages weighing up to 28,184 lb (12,811 kg)

  15. Questionnaire survey of customer satisfaction for product categories towards certification of ergonomic quality in design.

    Science.gov (United States)

    Mochimaru, Masaaki; Takahashi, Miwako; Hatakenaka, Nobuko; Horiuchi, Hitoshi

    2012-01-01

    Customer satisfaction was surveyed for 6 product categories (consumer electronics, daily commodities, home equipment, information systems, cars, and health appliances) by questionnaires based on the Analytic Hierarchy Process. Analyzing weight of evaluation factors, the 6 product categories were reorganized into 4 categories, those were related to 4 aspects in daily living that formed by two axes: home living - mobility life and healthy life - active communication. It was found that consumers were attracted by the actual user test by public institutes for all product categories. The certification based on the design process standard established by authorities, such as EQUID was the second best attractor for consumers.

  16. A Healthy Mix: A Case Study of the University of North Carolina at Chapel Hill's Interdisciplinary Health Communication Certificate Program

    Science.gov (United States)

    El-Toukhy, Sherine; Holman, Lynette

    2012-01-01

    This study evaluated attitudes toward interdisciplinary education by appraising the Interdisciplinary Health Communication (IHC) Certificate program at the University of North Carolina at Chapel Hill as a case study. Sixteen affiliated faculty and thirteen students enrolled in the IHC program as of 2008-2009 were surveyed. Although the attitude…

  17. Designing and Programming CICS Applications

    CERN Document Server

    Horswill, John

    2011-01-01

    CICS is an application server that delivers industrial-strength, online transaction management for critical enterprise applications. Proven in the market for over 30 years with many of the world's leading businesses, CICS enables today's customers to modernize and extend their applications to take advantage of the opportunities provided by e-business while maximizing the benefits of their existing investments. Designing and Programming CICS Applications will benefit a diverse audience. It introduces new users of IBM's mainframe (OS/390) to CICS features. It shows experienced users how t

  18. 45 CFR 170.457 - Authorized testing and certification methods.

    Science.gov (United States)

    2010-10-01

    ... TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

  19. Directory of Certificates of Compliance for radioactive materials packages: Report of NRC approved quality assurance programs for radioactive materials packages. Volume 3, Revision 15

    International Nuclear Information System (INIS)

    1995-10-01

    The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volumes 1 and 2. An alphabetical listing by user name is included in the back of Volume 3 of approved QA programs. The reports include a listing of all users of each package design and approved QA programs prior to the publication date

  20. Development of a medical humanities and ethics certificate program in Texas.

    Science.gov (United States)

    Erwin, Cheryl J

    2014-12-01

    Education in the medical humanities and ethics is an integral part of the formation of future physicians. This article reports on an innovative approach to incorporating the medical humanities and ethics into the four-year curriculum in a Certificate Program spanning all four years of the medical school experience. The faculty of the McGovern Center for Humanities and Ethics at the University of Texas Medical School at Houston conceived and implemented this program to teach medical students a range of scholarly topics in the medical humanities and to engage the full human experience into the process of becoming a physician. This study follows six years of experience, and we report student experiences and learning in their own words.

  1. Sustainability Certification (DGNB) and Design Process in the Case of four Healthcare Centres

    DEFF Research Database (Denmark)

    Brunsgaard, Camilla

    2016-01-01

    Sustainability certification schemes experience grooving popularity. Only few years ago, Denmark got its own sustainability certification scheme based on the German DGNB certification scheme run by Green Building Council Denmark [1]. The objective of this study is to investigate if and in what wa...

  2. Personnel selection, training and certification in the U.S. Army Chemical Demilitarization Program

    International Nuclear Information System (INIS)

    Howarth, R.J.; Findlay, K.W.; Cohen, S.L.

    1991-01-01

    This paper describes the major steps taken to assure the US Army, as well as state and federal officials, that the individuals slated to operate and maintain future chemical disposal facilities will be carefully screened, well-trained and certified to safely carry out their tasks. Careful personnel screening, total plant staff training, individual qualification and team certification protect plant personnel, the public and the environment. Experience has shown that the care taken in adequate screening of job applicants for highly technical and potentially hazardous work results in fewer incidents or accidents on the job. To ensure that each individual selected receives appropriate and necessary training, the US Army has constructed a five-building Chemical Demilitarization Training Facility (CDTF), which may set future standards in the hazardous waste disposal industry. The training center contains automated chemical agent material handling equipment, multiple furnace and pollution abatement system dynamic control room simulations and five laboratories for training agent analysis and monitoring personnel. A qualification and certification program marks the end of the training and verifies that plant employees are fully prepared to operate the disposal facility safely

  3. Mentoring Alternative Certification Teachers: Implementing an Online Collaborative Consultation Community

    Science.gov (United States)

    Dukes, Lyman, III; Jones, Brett D.

    2007-01-01

    Online discussion boards have the potential to provide significant support to beginning teachers; thus, we designed an online collaborative consultation community to provide mentor support to university students enrolled in an alternative certification program. The results suggest that although students in alternative certification programs will…

  4. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2003 ed

    International Nuclear Information System (INIS)

    2003-10-01

    This is the fourteenth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Transport Safety Standards Committee (TRANSSC). It supersedes IAEA-TECDOC-1302 'Directory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 2002 Edition'. Through the database, the Secretariat collects administrative and technical information provided by the issuing competent authority about package approval certificates. Such data are used mainly by national competent authorities and port and customs officials to assist in regulating radioactive material movements in their country, and also by manufacturers and shippers of radioactive material. The database carries information on extant certificates and those that expired within the last complete calendar year. The PACKTRAM database only contains information that has been provided to the IAEA. The data are not complete nor guaranteed to be accurate. If detailed information is required, the original package approval certificates must be consulted. If information is required about package approval certificates that are not contained in the database, the issuing competent authority must be consulted

  5. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2003 ed

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-10-01

    This is the fourteenth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Transport Safety Standards Committee (TRANSSC). It supersedes IAEA-TECDOC-1302 'Directory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 2002 Edition'. Through the database, the Secretariat collects administrative and technical information provided by the issuing competent authority about package approval certificates. Such data are used mainly by national competent authorities and port and customs officials to assist in regulating radioactive material movements in their country, and also by manufacturers and shippers of radioactive material. The database carries information on extant certificates and those that expired within the last complete calendar year. The PACKTRAM database only contains information that has been provided to the IAEA. The data are not complete nor guaranteed to be accurate. If detailed information is required, the original package approval certificates must be consulted. If information is required about package approval certificates that are not contained in the database, the issuing competent authority must be consulted.

  6. Consolidation and Decomposition of APR1400 NRC Design Certification Processes for Collaborative and Accelerated Processing

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Young Chul [FNC Technology Co., Yongin (Korea, Republic of); Kang, Deog Ji [KNHP, Daejeon (Korea, Republic of)

    2016-05-15

    KEPCO and KHNP are conducting APR1400 Design Certification from NRC. For the proper management of processes and information, a system called RIS (Regulatory Information management System) has been implemented by FNC from 2014, and it is on the final stage. In retaining the certification from NRC, RIS will be a very essential role by providing platform for collaborative and accelerated processing of responses to RAI (Request of Additional Information). Preparation of responses to RAI with this kind of systematic approach may be the first in the world. Westinghouse is doing manually and using MS Excel to collect the processing status. Where as, RIS will enable each member can do his own job and collect the status automatically. In this paper, how collaborative and accelerated processing of responses to RAI can be enabled will be described, and further enhancements will also be discussed. It handles MS Word directory with the help of VSTO. And with the help of Aspose.Total for .NET, the prepared response to RAI meets NRC's requirements. Through some further work and direct integration with requirement management solution, RIS can be expanded to cover a prior impact notice in case of DCD being altered.

  7. The Hemingway Project: A Collaborative School-based Program for Teacher Certification.

    Science.gov (United States)

    Butler, Shannon K.; And Others

    At Weber State University (Utah), teacher educators have collaborated with English faculty to design a pilot program (Hemingway Project) which serves as an initial effort to restructure the teacher education program. The program, funded by the Hemingway Foundation, is intended to provide greater integration of the university experience with actual…

  8. Directory of certificates of compliance for radioactive materials packages: summary report of NRC approved quality-assurance programs for radioactive-material packages. Volume 3, Revision 3

    International Nuclear Information System (INIS)

    1983-09-01

    This directory contains a Summary Report of NRC Approved Packages (Volume 1), Certificates of Compliance (Volume 2), and a Summary Report of NRC Approved Quality Assurance Programs for Radioactive Material Packages (Volume 3). The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance number is included at the back of each volume of the directory. The Summary Report includes a listing of all users of each package design prior to the publication date of the directory. Shipments of radioactive material utilizing these packagings must be in accordance with the provisions of 49 CFR 173.471 and 10 CFR Part 71, as applicable. In satisfying the requirements of Section 71.12, it is the responsibility of the licensees to insure them in accordance with an NRC approved quality assurance program. Copies of the current approval may be obtained from the US Nuclear Regulatory Commission Public Document Room files (see Docket No. listed on each certificate) at 1717 H Street, Washington, DC 20555. Note that the general license of 10 CFR 71.12 does not authorize the receipt, possession, use or transfer of byproduct source, or special nuclear material; such authorization must be obtained pursuant to 10 CFR Parts 30 to 36, 40, 50, or 70

  9. Directory of certificates of compliance for radioactive materials packages. Summary report of NRC approved quality assurance programs for radioactive material packages. Volume 3, Revision 6

    International Nuclear Information System (INIS)

    1986-10-01

    This directory contains a Summary Report of NRC Approved Packages (Volumes 1), Certificates of Compliance (Volume 2), and a Summary Report of NRC Approved Quality Assurance Programs for Radioactive Material Packages (Volume 3). The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance number is included at the back of each volume of the directory. The Summary Report includes a listing of all users of each package design prior to the publication date of the directory. Shipments of radioactive material utilizing these packagings must be in accordance with the provisions of 49 CFR 173.471 and 10 CFR Part 71, as applicable. In satisfying the requirements of Section 71.12, it is the responsibility of the licensees to insure them that have a copy of the current approval and conduct their transportation activities in accordance with an NRC approved quality assurance program. Copies of the current approval may be obtained from the US Nuclear Regulatory Commission Public Document Room files (see Docket No. listed on each certificate) at 1717 H Street, Washington, DC 20555. Note that the general license of 10 CFR 71.12 does not authorize the receipt, possession, use of transfer of byproduct source, or special nuclear material; such authorization must be obtained pursuant to 10 CFR Parts 30 to 36, 40, 50, or 70

  10. Directory of certificates of compliance for radioactive materials packages. Summary report of NRC approved quality assurance programs for radioactive material packages. Volume 3, Revision 4

    International Nuclear Information System (INIS)

    1984-11-01

    This directory contains a Summary Report of NRC Approved Packages (Volume 1), Certificates of Compliance (Volume 2), and a Summary Report of NRC Approved Quality Assurance Programs for Radioactive Material Packages (Volume 3). The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance number is included at the back of each volume of the directory. The Summary Report includes a listing of all users of each package design prior to the publication date of the directory. Shipments of radioactive material utilizing these packagings must be in accordance with the provisions of 49 CFR 173.471 and 10 CFR Part 71, as applicable. In satisfying the requirements of Section 71.12, it is the responsibility of the licensees to insure they have a copy of the current approval and conduct their transportation activities in accordance with an NRC approved quality assurance program. Copies of the current approval may be obtained from the US Nuclear Regulatory Commission Public Document Room files (see Docket No. listed on each certificate) at 1717 H Street, Washington, DC 20555. Note that the general license of 10 CFR 71.12 does not authorize the receipt, possession, use or transfer of byproduct source, or special nuclear material; such authorization must be obtained pursuant to 10 CFR Parts 30 to 36, 40, 50, or 70

  11. Evaluation of American Board of Orthodontics certification protocols in postgraduate orthodontic programs in the United States and Canada.

    Science.gov (United States)

    Park, Jae Hyun; Putrus, Raphael R; Pruzansky, Dawn P; Grubb, John

    2017-03-01

    The objective of this study was to identify the board certification protocols that hospital and university-based postgraduate orthodontic programs have in place to prepare residents for the American Board of Orthodontics (ABO) certification examination. An electronic survey was sent to the program directors of each of the 72 postgraduate orthodontic programs in the United States and Canada. The survey consisted of 49 questions about demographics, resident case assignment protocols, and ABO examination preparation methods. The response rate was 81%. Most programs were 30 to 36 months in length (72.7%). Many residents had a case load of 51 to 75 during their first year (50.9%), with an average maximum case load of 70 to 109. There was a positive correlation with both the number of cases that first-year residents start and the length of the program (Spearman correlation coefficient = 0.379; P <0.01) when compared with maximum case load. Approximately 72% of the programs do not offer a written mock board examination; however, 72% reported offering a clinical mock board examination. ABO cases are identified within the first 6 months of most programs. About 88% of respondents believe that residents take advantage of the banking system, and that over the past 5 years ABO Initial Certification Examination applications have increased. Most program directors (89.1%) believe that their program length is sufficient for board preparation. Subjects tested in the written examination are integrated into the didactic curriculum and strengthened with ongoing literature reviews, with a passing rate over 90%. Clinical examination preparation varies, with most programs requiring a mock board examination for graduation. Total participation in both the Initial Certification Examination and banking has increased since 2010; better follow-up protocols are needed to track residents after graduation. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc

  12. Examination of Sign Language Education According to the Opinions of Members from a Basic Sign Language Certification Program

    Science.gov (United States)

    Akmese, Pelin Pistav

    2016-01-01

    Being hearing impaired limits one's ability to communicate in that it affects all areas of development, particularly speech. One of the methods the hearing impaired use to communicate is sign language. This study, a descriptive study, intends to examine the opinions of individuals who had enrolled in a sign language certification program by using…

  13. 77 FR 38375 - Advisory Circular (AC) 150/5345-53D, Airport Lighting Equipment Certification Program; Proposed...

    Science.gov (United States)

    2012-06-27

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Advisory Circular (AC) 150/5345-53D... Advisory Circular (AC) 150/5345-53D, Airport Lighting Equipment Certification Program, is being circulated... on a separate document and not embedded in the draft AC. Additionally, please provide justification...

  14. THE RELATIONSHIP BETWEEN PEDAGOGICAL FORMATION TRAINING CERTIFICATE PROGRAM PROSPECTIVE TEACHERS' CRITICAL THINKING ATTITUDES AND THEIR PERCEPTIONS ON PROFESSIONAL ETHICAL PRINCIPLES

    OpenAIRE

    Birsel Aybek; Serkan Aslan

    2017-01-01

    This research aims to analyze the relationship between pedagogical formation training certificate program prospective teachers’ critical thinking attitudes and their perceptions on professional ethical principles. The study used relational screening model and convenience sampling method which is one of the purposeful sampling methods. The participants consisted of 393 prospective teachers from different majors such as mathematics, physics, chemistry, health, biology, philosophy, religious cul...

  15. Building and implementing a security certification and accreditation program official (ISC)2 guide to the CAPCM CBK

    CERN Document Server

    Howard, Patrick D

    2004-01-01

    Building and Implementing a Security Certification and Accreditation Program: Official (ISC)2 Guide to the CAP CBK demonstrates the practicality and effectiveness of certification and accreditation (C&A) as a risk management methodology for IT systems in both public and private organizations. It provides security professionals with an overview of C&A components, enabling them to document the status of the security controls of their IT systems, and learn how to secure systems via standard, repeatable processes.  This book consists of four main sections. It begins with a description of what it

  16. The holistic worldview in action: evolution of holistic nurses certification programs.

    Science.gov (United States)

    Erickson, Helen Lorraine; Erickson, Margaret Elizabeth; Sandor, M Kay; Brekke, Mary E

    2013-12-01

    The American Holistic Nurses Credentialing Corporation (AHNCC), the only national credentialing body for holistic nurses, has a responsibility to offer valid, reliable, and rigorous certification examinations and to grow and evolve as indicated by social and professional changes. This article describes four major changes in the work of AHNCC since 2004: a detection of an evolution in the domain of holistic nursing through review of the literature; clarification and specification of levels of practice by educational level; development of the nurse coach role in nursing, designed within the precepts of holistic nursing; and AHNCC's response to the social paradigm shift for health care, and nursing's advanced practice registered nurse consensus model. Each of these is discussed in detail describing the circumstances that perpetuated AHNCC's consideration and the actions taken by AHNCC.

  17. 10 CFR Appendix D to Part 52 - Design Certification Rule for the AP1000 Design

    Science.gov (United States)

    2010-01-01

    ... severe accident mitigation design alternatives in appendix 1B of the generic DCD are not part of this... issues concerning severe accident mitigation design alternatives associated with the information in the... appendix whose site parameters are within those specified in the severe accident mitigation design...

  18. Regulatory issues resolved through design certification on the System 80+trademark standard plant design

    International Nuclear Information System (INIS)

    Ritterbusch, S.E.; Brinkman, C.B.

    1996-01-01

    The US Nuclear Regulatory Commission (NRC) has completed its review of the System 80+trademark Standard Plant Design, approving advanced design features and closing severe accident licensing issues. Final Design Approval was granted in July 1994. The NRC review was extensive, requiring written responses to over 4,950 questions and formal printing of over 50,000 Safety Analysis Report pages. New safety issues never before addressed in a regulatory atmosphere had to be resolved with detailed analysis and evaluation of design features. the System 80+ review demonstrated that regulatory issues can be firmly resolved only through presentation of a detailed design and completion of a comprehensive regulatory review

  19. Market Aspects of an Interior Design Program.

    Science.gov (United States)

    Gold, Judy E.

    A project was conducted to evaluate a proposed interior design program in order to determine the marketability (job availability in the field of interior design and home furnishings merchandising) and the feasibility (educational requirements for entrance into the interior design and home furnishings merchandising job market) of the program. To…

  20. Admission factors associated with international medical graduate certification success: a collaborative retrospective review of postgraduate medical education programs in Ontario.

    Science.gov (United States)

    Grierson, Lawrence E M; Mercuri, Mathew; Brailovsky, Carlos; Cole, Gary; Abrahams, Caroline; Archibald, Douglas; Bandiera, Glen; Phillips, Susan P; Stirrett, Glenna; Walton, J Mark; Wong, Eric; Schabort, Inge

    2017-11-24

    The failure rate on certification examinations of The College of Family Physicians of Canada (CFPC) and the Royal College of Physicians and Surgeons of Canada (RCPSC) is significantly higher for international medical graduates than for Canadian medical school graduates. The purpose of the current study was to generate evidence that supports or refutes the validity of hypotheses proposed to explain the lower success rates. We conducted retrospective analyses of admissions and certification data to determine the factors associated with success of international medical graduate residents on the certification examinations. International medical graduates who entered an Ontario residency program between 2005 and 2012 and had written a certification examination by the time of the analysis (2015) were included in the study. Data available at the time of admission for each resident, including demographic characteristics, previous experiences and previous professional experiences, were collected from each of the 6 Ontario medical schools and matched with certification examination results provided by The CFPC and the RCPSC. We developed logistic regression models to determine the association of each factor with success on the examinations. Data for 900 residents were analyzed. The models revealed resident age to be strongly associated with performance across all examinations. Fluency in English, female sex and the Human Development Index value associated with the country of medical school training had differential associations across the examinations. The findings should contribute to an improved understanding of certification success by international medical graduates, help residency programs identify at-risk residents and underpin the development of specific educational and remedial interventions. In considering the results, it should be kept in mind that some variables are not amenable to changes in selection criteria. Copyright 2017, Joule Inc. or its licensors.

  1. Structured Design Language for Computer Programs

    Science.gov (United States)

    Pace, Walter H., Jr.

    1986-01-01

    Box language used at all stages of program development. Developed to provide improved productivity in designing, coding, and maintaining computer programs. BOX system written in FORTRAN 77 for batch execution.

  2. 10 CFR Appendix C to Part 52 - Design Certification Rule for the AP600 Design

    Science.gov (United States)

    2010-01-01

    ... approval, but only for that plant; 7. All environmental issues concerning severe accident mitigation design... specified in the severe accident mitigation design alternatives evaluation. C. The Commission does not...-specific DCD. b. A proposed departure from Tier 2, other than one affecting resolution of a severe accident...

  3. 10 CFR Appendix B to Part 52 - Design Certification Rule for the System 80+ Design

    Science.gov (United States)

    2010-01-01

    ... environmental issues concerning severe accident mitigation design alternatives associated with the information...-specific DCD. b. A proposed departure from Tier 2, other than one affecting resolution of a severe accident... severe accident design feature identified in the plant-specific DCD, requires a license amendment if: (1...

  4. The impact of a shade coffee certification program on forest conservation: a case study from a wild coffee forest in Ethiopia.

    Science.gov (United States)

    Takahashi, Ryo; Todo, Yasuyuki

    2013-11-30

    In recent years, shade coffee certification programs have attracted increasing attention from conservation and development organizations. Certification programs offer an opportunity to link environmental and economic goals by providing a premium price to producers and thereby contributing to forest conservation. However, the significance of the conservation efforts of certification programs remains unclear because of a lack of empirical evidence. The purpose of this study was to examine the impact of a shade coffee certification program on forest conservation. The study was conducted in the Belete-Gera Regional Forest Priority Area in Ethiopia, and remote sensing data of 2005 and 2010 were used to gauge the change of forest area. Using propensity score matching estimation, we found that forests under the coffee certification program were less likely to be deforested than forests without forest coffee. By contrast, the difference in the degree of deforestation between forests with forest coffee but not under the certification program and forests with no forest coffee is statistically insignificant. These results suggest that the certification program has had a large effect on forest protection, decreasing the probability of deforestation by 1.7 percentage points. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Directory of Certificates of Compliance for Radioactive Materials Packages. Summary Report of NRC Approved Quality Assurance Programs for Radioactive Material Packages. Volume 3. Revision 5

    International Nuclear Information System (INIS)

    1985-10-01

    This directory contains a Summary Report of the US Nuclear Regulatory Commission's Approved Packages (Volume I), all Certificates of Compliance (Volume 2), and Summary Report of NRC Approved Quality Assurance Programs (Volume 3) for Radioactive Material Packages effective October 1, 1985. The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the back of Volumes 1 and 2 of the directory. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by Company name is included in the back of Volume 3 for approved QA programs. The Summary Reports include a listing of all users of each package design and approved QA programs prior to the publication date of the directory. Shipments of radioactive material utilizing these packages must be in accordance with the provisions of 49 CFR Section 173.471 and 10 CFR Part 71, as applicable. In satisfying the requirements of Section 71.12, it is the responsibility of the licensees to insure themselves that they have a copy of the current approval and conduct their transportation activities in accordance with a Nuclear Regulatory Commission approved quality assurance program. Copies of the current approval may be obtained from the US Nuclear Regulatory Commission Public Document Room files (see Docket No. listed on each certificate) at 1717 H Street, Washington, DC 20555. Note that the general license of 10 CFR Section 71.12 does not authorize the receipt, possession, use or transfer of byproduct, source or special nuclear material; such authorization must be obtained pursuant to 10 CFR Parts 30 to 36, 40, or 70

  6. 7 CFR 54.2 - Designation of official certificates, memoranda, marks, other identifications, and devices for...

    Science.gov (United States)

    2010-01-01

    ...) Official device means any roller, stamp, brand or other device used under the regulations to mark any... the provisions in this part, the terms listed below shall have the respective meanings specified: (a) Official certificate means any form of certification, either written or printed, used under the regulations...

  7. 76 FR 72980 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

    Science.gov (United States)

    2011-11-28

    ... certification process. Comments should address the two bases for certification and, if possible, provide data to... 4279-2) for the following: Applicant/Location: Jekyll Island Ocean Front Hotel Principal Product/Purpose: The loan, guarantee, or grant application is to construct a new full service hotel, which will be...

  8. General-purpose RFQ design program

    International Nuclear Information System (INIS)

    Wadlinger, E.A.

    1984-01-01

    We have written a general-purpose, radio-frequency quadrupole (RFQ) design program that allows maximum flexibility in picking design algorithms. This program optimizes the RFQ on any combination of design parameters while simultaneously satisfying mutually compatible, physically required constraint equations. It can be very useful for deriving various scaling laws for RFQs. This program has a friendly user interface in addition to checking the consistency of the user-defined requirements and is written to minimize the effort needed to incorporate additional constraint equations. We describe the program and present some examples

  9. Internal medicine board certification and career pathways in Japan.

    Science.gov (United States)

    Koike, Soichi; Matsumoto, Masatoshi; Ide, Hiroo; Kawaguchi, Hideaki; Shimpo, Masahisa; Yasunaga, Hideo

    2017-05-08

    Establishing and managing a board certification system is a common concern for many countries. In Japan, the board certification system is under revision. The purpose of this study was to describe present status of internal medicine specialist board certification, to identify factors associated with maintenance of board certification and to investigate changes in area of practice when physicians move from hospital to clinic practice. We analyzed 2010 and 2012 data from the Survey of Physicians, Dentists and Pharmacists. We conducted logistic regression analysis to identify factors associated with the maintenance of board certification between 2010 and 2012. We also analyzed data on career transition from hospitals to clinics for hospital physicians with board certification. It was common for physicians seeking board certification to do so in their early career. The odds of maintaining board certification were lower in women and those working in locations other than academic hospitals, and higher in physicians with subspecialty practice areas. Among hospital physicians with board certification who moved to clinics between 2010 and 2012, 95.8% remained in internal medicine or its subspecialty areas and 87.7% maintained board certification but changed their practice from a subspecialty area to more general internal medicine. Revisions of the internal medicine board certification system must consider different physician career pathways including mid-career moves while maintaining certification quality. This will help to secure an adequate number and distribution of specialists. To meet the increasing demand for generalist physicians, it is important to design programs to train specialists in general practice.

  10. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1992 ed

    International Nuclear Information System (INIS)

    1992-08-01

    Being in a unique position to facilitate information exchange, the Secretariat of the International Atomic Energy Agency was requested by its Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM) to collate package approval data and publish periodical reports thereon. A database was implemented on the mainframe computer in the mid-1980s but this was soon adapted for use on a personal computer. A fully menu-driven system programme was designed that allows both contributing Member States and the Secretariat more flexibility in data processing and reporting. Complete documentation is available in the form of a user guide. The cut-off date used for this report is 31 August 1992. This report supersedes IAEA-TECDOC-617 ''Directory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 1991 Edition''. The information contained in this report is given in six tables. In each of these, information is presented in alphabetical order based on the certificate number. The certificate number is identical with the competent authority identification mark. It is composed of the issuing Member State's international vehicle registration identification (VRI) code, followed by a slash, then a unique number specific to a particular design or shipment that is assigned by the competent authority, another slash and finally a code identifying the type of package involved. ''-85'' is appended to those certificates that were approved on the basis of the 1985 Edition of Safety Series No. 6. Tables 1 to 4 present administrative data including issue and expiry dates, package identification, package serial numbers, modes for which the package/shipment is approved and the edition of Safety Series No. 6 on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table 5. Table 6

  11. Designing Surveys for Language Programs.

    Science.gov (United States)

    Brown, James Dean

    A discussion of survey methodology for investigating second language programs and instruction examines two methods: oral interviews and written questionnaires. Each method is defined, and variations are explored. For interviews, this includes individual, group, and telephone interviews. For questionnaires, this includes self-administered and…

  12. Development and institutionalization of the first online certificate and master program of biomedical informatics in global health in Peru

    OpenAIRE

    Garcia, Patricia J.; Facultad de Salud Pública y Administración, Universidad Peruana Cayetano Heredia. Lima, Perú. Department of Global Health, University of Washington. Seattle, Washington, EE. UU.; Egoavil, Miguel S.; Facultad de Salud Pública y Administración, Universidad Peruana Cayetano Heredia. Lima, Perú.; Blas, Magaly M.; Facultad de Salud Pública y Administración, Universidad Peruana Cayetano Heredia. Lima, Perú.; Alvarado-Vásquez, Eduardo; Facultad de Salud Pública y Administración, Universidad Peruana Cayetano Heredia. Lima, Perú.; Curioso, Walter H.; Facultad de Salud Pública y Administración, Universidad Peruana Cayetano Heredia. Lima, Perú. Department of Biomedical Informatics, School of Medicine, University of Washington. Seattle, Washington, EE. UU.; Zimic, Mirko; Unidad de Bioinformática, Laboratorios de Investigación y Desarrollo. Facultad de Ciencias y Filosofía, Universidad Peruana Cayetano Heredia. Lima, Perú.; Castagnetto, Jesus M.; Dirección Universitaria de Informática, Universidad Peruana Cayetano Heredia. Lima, Perú.; Lescano, Andres G.; US Naval Medical Research Unit No. 6 (NAMRU-6). Lima, Perú.; Lopez, Diego M.; Universidad del Cauca. Popayán, Colombia.; Carcamo, Cesar P.; Facultad de Salud Pública y Administración, Universidad Peruana Cayetano Heredia. Lima, Perú.

    2015-01-01

    Training in Biomedical Informatics is essential to meet the challenges of a globalized world. However, the development of postgraduate training and research programs in this area are scarce in Latin America. Through QUIPU: Andean Center for Training and research in Iformatics for Global Health, has developed the first Certificate and Master’s Program on Biomedical Informatics in the Andean Region. The aim of this article is to describe the experience of the program. To date, 51 students from ...

  13. Web-enhanced Curricular Infusion of ESOL Competencies in Initial Teacher Certification Programs

    Directory of Open Access Journals (Sweden)

    Karen Wolz Verkler

    2003-09-01

    Full Text Available As the cultural and linguistic diversity continues to increase in Florida s K-12 public school population, the demand for teachers trained to address their unique needs becomes paramount. Previously a responsibility of Florida s school districts, ESOL(English for Speakers of Other Languages training has been delegated to colleges of education per state mandate. This mandate requires that graduates of initial teacher certification programs in the state s universities demonstrate competency in all of the 25 Florida Performance Standards for Teachers of English for Speakers of Other Languages. In order to satisfy this charge, colleges of education in Florida are following a variety of training models: stand-alone courses, curricular infusion, or a combination of the two. A large, metropolitan university in Central Florida has developed an integrated model consisting of two stand-alone courses, field experience integration of the standards, and curricular infusion of ESOL standards via on-lone modules in methods courses. The authors, who teach methods courses in which such infusion has been recently effected, surveyed their students to obtain feedback regarding the modules, the results of which are discussed in this paper.

  14. The Florida State Initial Teacher Certification Test: A Case Study.

    Science.gov (United States)

    Dorn, Charles M.

    1989-01-01

    Describes the development of the art certification examination which was designed for the Florida State Initial Teacher Certification Test. Discusses problems of subjectivity, content, and question format. Suggests criteria which can guide the development of viable college art education programs that can adequately prepare teachers in the areas of…

  15. Fuel Gas Demonstration Plant Program: Small-Scale Industrial Project. Certificate of need

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-12-01

    This Certificate of Need draft was prepared to meet new requirements as imposed by the Minnesota Energy Agency (MEA) since the original Erie/DOE contract was signed. The preparation of this document was authorized with the approval of the Certificate of Need contained in Contract Amendment No. A-005 of the Erie/DOE contract. With the issue of the Certificate of Need draft, Erie Mining Company considers this document requirement complete as it pertains to Phase I activities and delivered to DOE in accordance with Erie/DOE contract EW-78-C-02-5066 Appendix A, Part 3.I.F.5.

  16. Electronic automation of LRFD design programs.

    Science.gov (United States)

    2010-03-01

    The study provided electronic programs to WisDOT for designing pre-stressed girders and piers using the Load : Resistance Factor Design (LRFD) methodology. The software provided is intended to ease the transition to : LRFD for WisDOT design engineers...

  17. 78 FR 37583 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

    Science.gov (United States)

    2013-06-21

    ... the receipt of a ``Certification of Non-Relocation and Market and Capacity Information Report'' (Form... also be used to purchase furniture and equipment. The NAICS industry code for this enterprise is 623220...

  18. Feasibility of developing a pilot car training and certification program in Alabama.

    Science.gov (United States)

    2010-09-01

    The State of Alabama does not currently require certification for the pilot car drivers who escort : oversize/overweight vehicles. The Alabama Department of Transportation contracted with The University : Transportation Center for Alabama (UTCA) to i...

  19. Effective safety training program design

    International Nuclear Information System (INIS)

    Chilton, D.A.; Lombardo, G.J.; Pater, R.F.

    1991-01-01

    Changes in the oil industry require new strategies to reduce costs and retain valuable employees. Training is a potentially powerful tool for changing the culture of an organization, resulting in improved safety awareness, lower-risk behaviors and ultimately, statistical improvements. Too often, safety training falters, especially when applied to pervasive, long-standing problems. Stepping, Handling and Lifting injuries (SHL) more commonly known as back injuries and slips, trips and falls have plagued mankind throughout the ages. They are also a major problem throughout the petroleum industry. Although not as widely publicized as other immediately-fatal accidents, injuries from stepping, materials handling, and lifting are among the leading causes of employee suffering, lost time and diminished productivity throughout the industry. Traditional approaches have not turned the tide of these widespread injuries. a systematic safety training program, developed by Anadrill Schlumberger with the input of new training technology, has the potential to simultaneously reduce costs, preserve employee safety, and increase morale. This paper: reviews the components of an example safety training program, and illustrates how a systematic approach to safety training can make a positive impact on Stepping, Handling and Lifting injuries

  20. International certification of nuclear power reactors design. A proposal from the U.S. NRC (Nuclear Regulatory Commission)

    International Nuclear Information System (INIS)

    Felizia, Eduardo R.

    2006-01-01

    The proposal foundations of the Nuclear Regulatory Commission Board Chairman are briefly described, which were enunciated at a meeting on Fourth Generation Reactors (Washington, March 2005). This proposal is analyzed mainly from the point of view of its consequences in third countries buyers of nuclear technology. The analysis is complemented by descriptions of the current process of the NRC design certification and of Third and Fourth Generation Reactors. (author) [es

  1. SU-F-P-05: Initial Experience with an Independent Certification Program for Stereotactic Radiosurgery and Stereotactic Body Radiation Therapy

    International Nuclear Information System (INIS)

    Solberg, T; Robar, J; Gevaert, T; Todorovic, M; Howe, J

    2016-01-01

    Purpose: The ASTRO document “Safety is no accident: A FRAMEWORK FOR QUALITY RADIATION ONCOLOGY AND CARE” recommends external reviews of specialized modalities. The purpose of this presentation is to describe the implementation of such a program for Stereotactic Radiosurgery (SRS) and Stereotactic Body radiation Therapy (SBRT). Methods: The margin of error for SRS and SBRT delivery is significantly smaller than that of conventional radiotherapy and therefore requires special attention and diligence. The Novalis Certified program was created to fill an unmet need for specialized SRS / SBRT credentialing. A standards document was drafted by a panel of experts from several disciplines, including medical physics, radiation oncology and neurosurgery. The document, based on national and international standards, covers requirements in program structure, personnel, training, clinical application, technology, quality management, and patient and equipment QA. The credentialing process was modeled after existing certification programs and includes an institution-generated self-study, extensive document review and an onsite audit. Reviewers generate a descriptive report, which is reviewed by a multidisciplinary expert panel. Outcomes of the review may include mandatory requirements and optional recommendations. Results: 15 institutions have received Novalis Certification, including 3 in the US, 7 in Europe, 4 in Australia and 1 in Asia. 87 other centers are at various stages of the process. Nine reviews have resulted in mandatory requirements, however all of these were addressed within three months of the audit report. All reviews have produced specific recommendations ranging from programmatic to technical in nature. Institutions felt that the credentialing process addressed a critical need and was highly valuable to the institution. Conclusion: Novalis Certification is a unique peer review program assessing safety and quality in SRS and SBRT, while recognizing

  2. SU-F-P-05: Initial Experience with an Independent Certification Program for Stereotactic Radiosurgery and Stereotactic Body Radiation Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Solberg, T [University of Pennsylvania, Philadelphia, PA (United States); Robar, J [Capital District Health Authority, Halifax, NS (Canada); Gevaert, T [University Hospital Brussels, Brussels (Belgium); Todorovic, M [Universitats-Klinikum Hamburg-Eppendorf, Hamburg (Germany); Howe, J [Associates In Medical Physics, Louisville, KY (United States)

    2016-06-15

    Purpose: The ASTRO document “Safety is no accident: A FRAMEWORK FOR QUALITY RADIATION ONCOLOGY AND CARE” recommends external reviews of specialized modalities. The purpose of this presentation is to describe the implementation of such a program for Stereotactic Radiosurgery (SRS) and Stereotactic Body radiation Therapy (SBRT). Methods: The margin of error for SRS and SBRT delivery is significantly smaller than that of conventional radiotherapy and therefore requires special attention and diligence. The Novalis Certified program was created to fill an unmet need for specialized SRS / SBRT credentialing. A standards document was drafted by a panel of experts from several disciplines, including medical physics, radiation oncology and neurosurgery. The document, based on national and international standards, covers requirements in program structure, personnel, training, clinical application, technology, quality management, and patient and equipment QA. The credentialing process was modeled after existing certification programs and includes an institution-generated self-study, extensive document review and an onsite audit. Reviewers generate a descriptive report, which is reviewed by a multidisciplinary expert panel. Outcomes of the review may include mandatory requirements and optional recommendations. Results: 15 institutions have received Novalis Certification, including 3 in the US, 7 in Europe, 4 in Australia and 1 in Asia. 87 other centers are at various stages of the process. Nine reviews have resulted in mandatory requirements, however all of these were addressed within three months of the audit report. All reviews have produced specific recommendations ranging from programmatic to technical in nature. Institutions felt that the credentialing process addressed a critical need and was highly valuable to the institution. Conclusion: Novalis Certification is a unique peer review program assessing safety and quality in SRS and SBRT, while recognizing

  3. Final safety evaluation report related to the certification of the Advanced Boiling Water Reactor design. Supplement 1

    International Nuclear Information System (INIS)

    1997-05-01

    This report supplements the final safety evaluation report (FSER) for the US Advanced Boiling Water Reactor (ABWR) standard design. The FSER was issued by the US Nuclear Regulatory Commission (NRC) staff as NUREG-1503 in July 1994 to document the NRC staff's review of the US ABWR design. The US ABWR design was submitted by GE Nuclear Energy (GE) in accordance with the procedures of Subpart B to Part 52 of Title 10 of the Code of Federal Regulations. This supplement documents the NRC staff's review of the changes to the US ABWR design documentation since the issuance of the FSER. GE made these changes primarily as a result of first-of-a-kind-engineering (FOAKE) and as a result of the design certification rulemaking for the ABWR design. On the basis of its evaluations, the NRC staff concludes that the confirmatory issues in NUREG-1503 are resolved, that the changes to the ABWR design documentation are acceptable, and that GE's application for design certification meets the requirements of Subpart B to 10 CFR Part 52 that are applicable and technically relevant to the US ABWR design

  4. Final safety evaluation report related to the certification of the advanced boiling water reactor design. Volume 1: Main report

    International Nuclear Information System (INIS)

    1994-07-01

    This safety evaluation report (SER) documents the technical review of the US Advanced Boiling Water Reactor (ABWR) standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the ABWR design was initially submitted by the General Electric Company, now GE Nuclear Energy (GE), in accordance with the procedures of Appendix O of Part 50 of Title 10 of the Code of Federal Regulations (10 CFR Part 50). Later GE requested that its application be considered as an application for design approval and subsequent design certification pursuant to 10 CFR section 52.45. The ABWR is a single-cycle, forced-circulation, boiling water reactor (BWR) with a rated power of 3,926 megawatts thermal (MWt) and a design power of 4,005 MWt. To the extent feasible and appropriate, the staff relied on earlier reviews for those ABWR design features that are substantially the same as those previously considered. Unique features of the ABWR design include internal recirculation pumps, fine-motion control rod drives, microprocessor-based digital logic and control systems, and digital safety systems. On the basis of its evaluation and independent analyses, the NRC staff concludes that, subject to satisfactory resolution of the confirmatory items identified in Section 1.8 of this SER, GE's application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the US ABWR standard design

  5. Final safety evaluation report related to the certification of the advanced boiling water reactor design. Volume 2: Appendices

    International Nuclear Information System (INIS)

    1994-07-01

    This safety evaluation report (SER) documents the technical review of the US Advanced Boiling Water Reactor (ABWR) standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the ABWR design was initially submitted by the General Electric Company, now GE Nuclear Energy (GE), in accordance with the procedures of Appendix O of Part 50 of Title 10 of the code of Federal Regulations (10 CFR Part 50). Later GE requested that its application be considered as an application for design approval and subsequent design certification pursuant to 10 CFR section 52.45. The ABWR is a single-cycle, forced-circulation, boiling water reactor (BWR) with a rated power of 3,926 megawatts thermal (MWt) and a design power of 4,005 MWt. To the extent feasible and appropriate, the staff relied on earlier reviews for those ABWR design features that are substantially the same as those previously considered. Unique features of the ABWR design include internal recirculation pumps, fine-motion control rod drives, microprocessor-based digital logic and control systems, and digital safety systems. On the basis of its evaluation and independent analyses, the NRC staff concludes that, subject to satisfactory resolution of the confirmatory items identified in Section 1.8 of this SER, GE's application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the US ABWR standard design

  6. Final safety evaluation report related to the certification of the advanced boiling water reactor design. Volume 1: Main report

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    This safety evaluation report (SER) documents the technical review of the US Advanced Boiling Water Reactor (ABWR) standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the ABWR design was initially submitted by the General Electric Company, now GE Nuclear Energy (GE), in accordance with the procedures of Appendix O of Part 50 of Title 10 of the Code of Federal Regulations (10 CFR Part 50). Later GE requested that its application be considered as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. The ABWR is a single-cycle, forced-circulation, boiling water reactor (BWR) with a rated power of 3,926 megawatts thermal (MWt) and a design power of 4,005 MWt. To the extent feasible and appropriate, the staff relied on earlier reviews for those ABWR design features that are substantially the same as those previously considered. Unique features of the ABWR design include internal recirculation pumps, fine-motion control rod drives, microprocessor-based digital logic and control systems, and digital safety systems. On the basis of its evaluation and independent analyses, the NRC staff concludes that, subject to satisfactory resolution of the confirmatory items identified in Section 1.8 of this SER, GE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the US ABWR standard design.

  7. Final safety evaluation report related to the certification of the Advanced Boiling Water Reactor design. Supplement 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    This report supplements the final safety evaluation report (FSER) for the US Advanced Boiling Water Reactor (ABWR) standard design. The FSER was issued by the US Nuclear Regulatory Commission (NRC) staff as NUREG-1503 in July 1994 to document the NRC staff`s review of the US ABWR design. The US ABWR design was submitted by GE Nuclear Energy (GE) in accordance with the procedures of Subpart B to Part 52 of Title 10 of the Code of Federal Regulations. This supplement documents the NRC staff`s review of the changes to the US ABWR design documentation since the issuance of the FSER. GE made these changes primarily as a result of first-of-a-kind-engineering (FOAKE) and as a result of the design certification rulemaking for the ABWR design. On the basis of its evaluations, the NRC staff concludes that the confirmatory issues in NUREG-1503 are resolved, that the changes to the ABWR design documentation are acceptable, and that GE`s application for design certification meets the requirements of Subpart B to 10 CFR Part 52 that are applicable and technically relevant to the US ABWR design.

  8. 77 FR 70176 - Previous Participation Certification

    Science.gov (United States)

    2012-11-23

    ... participants' previous participation in government programs and ensure that the past record is acceptable prior... information is designed to be 100 percent automated and digital submission of all data and certifications is... government programs and ensure that the past record is acceptable prior to granting approval to participate...

  9. Slide layout and integrated design (SLIDE) program

    International Nuclear Information System (INIS)

    Roberts, S.G.

    1975-01-01

    SLIDE is a FORTRAN IV program for producing 35 mm color slides on the Control Data CYBER-74. SLIDE interfaces with the graphics package, DISSPLA, on the CYBER-74. It was designed so that persons with no previous computer experience can easily and quickly generate their own textual 35 mm color slides for verbal presentations. SLIDE's features include seven different colors, five text sizes, ten tab positions, and two page sizes. As many slides as desired may be produced during any one run of the program. Each slide is designed to represent an 8 1 / 2 in. x 11 in. or an 11 in. x 8 1 / 2 in. page. The input data cards required to run the SLIDE program and the program output are described. Appendixes contain a sample program run showing input, output, and the resulting slides produced and a FORTRAN listing of the SLIDE program. (U.S.)

  10. Double degree master program: Optical Design

    Science.gov (United States)

    Bakholdin, Alexey; Kujawinska, Malgorzata; Livshits, Irina; Styk, Adam; Voznesenskaya, Anna; Ezhova, Kseniia; Ermolayeva, Elena; Ivanova, Tatiana; Romanova, Galina; Tolstoba, Nadezhda

    2015-10-01

    Modern tendencies of higher education require development of master programs providing achievement of learning outcomes corresponding to quickly variable job market needs. ITMO University represented by Applied and Computer Optics Department and Optical Design and Testing Laboratory jointly with Warsaw University of Technology represented by the Institute of Micromechanics and Photonics at The Faculty of Mechatronics have developed a novel international master double-degree program "Optical Design" accumulating the expertise of both universities including experienced teaching staff, educational technologies, and experimental resources. The program presents studies targeting research and professional activities in high-tech fields connected with optical and optoelectronics devices, optical engineering, numerical methods and computer technologies. This master program deals with the design of optical systems of various types, assemblies and layouts using computer modeling means; investigation of light distribution phenomena; image modeling and formation; development of optical methods for image analysis and optical metrology including optical testing, materials characterization, NDT and industrial control and monitoring. The goal of this program is training a graduate capable to solve a wide range of research and engineering tasks in optical design and metrology leading to modern manufacturing and innovation. Variability of the program structure provides its flexibility and adoption according to current job market demands and personal learning paths for each student. In addition considerable proportion of internship and research expands practical skills. Some special features of the "Optical Design" program which implements the best practices of both Universities, the challenges and lessons learnt during its realization are presented in the paper.

  11. Design and Development of a Nonverbal Program

    Science.gov (United States)

    Thiagarajan, S.

    1973-01-01

    Problems were encountered in designing an illustrated program on contraceptive techniques for India's rural population where illiteracy is high and hundreds of different languages are spoken. Field trials of a picture program indicated the ability to "read" a picture is an acquired skill. (Author)

  12. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2002 ed

    International Nuclear Information System (INIS)

    2002-08-01

    The current edition of the transport Regulations was published in 1996 and is more commonly referred to as 'ST-1'. Earlier Editions were known as Safety Series No. 6. The latest English reprint (2000) is now identified as TS-R-1 (ST-1, Revised). The transport Regulations elaborate requirements for the design, fabrication and maintenance of packaging as well as those for preparation, consigning, handling, carriage, storage in transit and receipt of the packages at final destination. Approval issued in the form of certificates is required for the design or shipment of packages. This report supersedes IAEA-TECDOC-1237 Directory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 2001 Edition. It is distributed worldwide to the IAEA Member States' competent authorities for transport, and other entities who have requested copies. Electronic copies of the main data file are provided to registered users of the PACKTRAM database. The information contained in this report is given in six tables. In each of these, information is presented in alphabetical order based on the certificate number. Tables 1 to 4 present administrative data including issue and expiry dates, package identification, package serial numbers, modes for which the package/shipment is approved and the edition of the IAEA Transport Safety Regulations on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table 5. Table 6 shows the certificates reported to the Secretariat by each participating Member State

  13. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2001 edition

    International Nuclear Information System (INIS)

    2001-08-01

    The current edition of the transport Regulations was published in 1996 and is more commonly referred to as 'ST-1'. Earlier Editions were known as Safety Series No. 6. The latest English reprint (2000) is now identified as TS-R-1 (ST-1, Revised). The transport Regulations elaborate requirements for the design, fabrication and maintenance of packaging as well as those for preparation, consigning, handling, carriage, storage in transit and receipt of the packages at final destination. Approval issued in the form of certificates is required for the design or shipment of packages. This report supersedes IAEA-TECDOC-1171 D irectory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 2000 Edition . It is distributed worldwide to the IAEA Member States' competent authorities for transport, and other entities who have requested copies. Electronic copies of the main data file are provided to registered users of the PACKTRAM database. The information contained in this report is given in six tables. In each of these, information is presented in alphabetical order based on the certificate number. Tables 1 to 4 present administrative data including issue and expiry dates, package identification, package serial numbers, modes for which the package/shipment is approved and the edition of the IAEA Transport Safety Regulations on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table 5. Table 6 shows the certificates reported to the Secretariat by each participating Member State

  14. Designing an orientation program for new faculty.

    Science.gov (United States)

    Holyfield, Lavern J; Berry, Charles W

    2008-12-01

    The Faculty Development Committee (FDC) at Baylor College of Dentistry (BCD) is charged with providing programs and activities that facilitate the success of existing faculty in the constantly changing environment of academia. In response to concerns regarding the challenges wrought by current and projected shortages of dental faculty across the nation, the FDC was prompted to assess development opportunities available to BCD faculty. A professional development resource that we found deficient was a formal, comprehensive orientation program for newly hired faculty. To guide the efforts of the committee in developing this program, a survey was designed and administered during an annual faculty retreat. Respondents were new and junior faculty, senior faculty, and some administrators. The results of the survey to determine requirements for new faculty orientation became the basis for formalizing BCD's new faculty orientation program. This article provides an overview of the new faculty orientation process from design to program implementation and describes the development and use of a faculty survey to determine the fundamental elements of a faculty development program, identification of essential individuals for designing/implementing the program, and implementation of a new faculty orientation program at BCD.

  15. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2004 ed

    International Nuclear Information System (INIS)

    2004-10-01

    The PACKTRAM database contains administrative and technical information provided annually by the issuing competent authority about package approval certificates. Such data are used mainly by national competent authorities and port and customs officials to assist in regulating radioactive material movements in their country, and also by manufacturers and shippers of radioactive material. The database carries information on extant certificates and those that expired within the last complete calendar year. This is the fifteenth PACKTRAM annual report to being published by the IAEA. It is distributed worldwide mainly to designated competent authorities, as well as to registered interested parties. The database itself is maintained at www.packtram.org and can be accessed by the general public

  16. [Development and institutionalization of the first online certificate and Master Program of Biomedical Informatics in global health in Peru].

    Science.gov (United States)

    García, Patricia J; Egoavil, Miguel S; Blas, Magaly M; Alvarado-Vásquez, Eduardo; Curioso, Walter H; Zimic, Mirko; Castagnetto, Jesus M; Lescano, Andrés G; Lopez, Diego M; Cárcamo, Cesar P

    2015-01-01

    Training in Biomedical Informatics is essential to meet the challenges of a globalized world. However, the development of postgraduate training and research programs in this area are scarce in Latin America. Through QUIPU: Andean Center for Training and research in Iformatics for Global Health, has developed the first Certificate and Master’s Program on Biomedical Informatics in the Andean Region. The aim of this article is to describe the experience of the program. To date, 51 students from Peru, Chile, Ecuador, Colombia and Venezuela have participated; they come from health ministries, hospitals, universities, research centers, professional associations and private companies. Seventeen courses were offered with the participation of faculty from Argentina, Chile, Colombia, USA, Mexico and Peru. This program is already institutionalized at the School of Public Health and Administration from the Universidad Peruana Cayetano Heredia.

  17. DEVELOPMENT AND INSTITUTIONALIZATION OF THE FIRST ONLINE CERTIFICATE AND MASTER PROGRAM OF BIOMEDICAL INFORMATICS IN GLOBAL HEALTH IN PERU

    Science.gov (United States)

    García, Patricia J.; Egoavil, Miguel S.; Blas, Magaly M.; Alvarado-Vásquez, Eduardo; Curioso, Walter H.; Zimic, Mirko; Castagnetto, Jesus M.; Lescano, Andrés G.; Lopez, Diego M.; Cárcamo, Cesar P.

    2017-01-01

    Training in Biomedical Informatics is essential to meet the challenges of a globalized world. However, the development of postgraduate training and research programs in this area are scarce in Latin America. Through QUIPU: Andean Center for Training and research in Iformatics for Global Health, has developed the first Certificate and Master’s Program on Biomedical Informatics in the Andean Region. The aim of this article is to describe the experience of the program. To date, 51 students from Peru, Chile, Ecuador, Colombia and Venezuela have participated; they come from health ministries, hospitals, universities, research centers, professional associations and private companies. Seventeen courses were offered with the participation of faculty from Argentina, Chile, Colombia, USA, Mexico and Peru. This program is already institutionalized at the School of Public Health and Administration from the Universidad Peruana Cayetano Heredia. PMID:26338399

  18. Do we need a critical care ultrasound certification program? Implications from an Australian medical-legal perspective.

    Science.gov (United States)

    Huang, Stephen J; McLean, Anthony S

    2010-01-01

    Medical practitioners have a duty to maintain a certain standard of care in providing their services. With critical care ultrasound gaining popularity in the ICU, it is envisaged that more intensivists will use the tool in managing their patients. Ultrasound, especially echocardiography, can be an 'easy to learn, difficult to manage' skill, and the competency in performing the procedure varies greatly. In view of this, several recommendations for competency statements have been published in recent years to advocate the need for a unified approach to training and certification. In this paper, we take a slightly different perspective, from an Australian medical-legal viewpoint, to argue for the need to implement a critical care ultrasound certification program. We examine various issues that can potentially lead to a breach of the standard of care, hence exposing the practitioners and/or the healthcare institutions to lawsuits in professional negligence or breach of contract. These issues, among others, include the failure to use ultrasound in appropriate situations, the failure of hospitals to ensure practitioners are properly trained in the skills, the failure of practitioners to perform an ultrasound study that is of a reasonable standard, and the failure of practitioners to keep themselves abreast of the latest developments in treatment and management. The implications of these issues and the importance of having a certification process are discussed.

  19. 48 CFR 52.250-3 - SAFETY Act Block Designation/Certification.

    Science.gov (United States)

    2010-10-01

    ... its terms if they plan to take advantage of SAFETY Act coverage for their technology(ies). (d) All... unlawful. (2) Causes harm, including financial harm, to a person, property, or entity, in the United States... Act certification of a technology class that the Department of Homeland Security (DHS) has determined...

  20. 77 FR 31892 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

    Science.gov (United States)

    2012-05-30

    ... the receipt of a ``Certification of Non-Relocation and Market and Capacity Information Report'' (Form... States Department of Agriculture to make or guarantee loans or grants to finance industrial and business activities in rural areas. The Secretary of Labor must review the application for financial assistance for...

  1. 78 FR 37584 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

    Science.gov (United States)

    2013-06-21

    ... the receipt of a ``Certification of Non-Relocation and Market and Capacity Information Report'' (Form... Department of Agriculture to make or guarantee loans or grants to finance industrial and business activities in rural areas. The Secretary of Labor must review the application for financial assistance for the...

  2. 77 FR 22612 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

    Science.gov (United States)

    2012-04-16

    ... the receipt of a ``Certification of Non-Relocation and Market and Capacity Information Report'' (Form... States Department of Agriculture to make or guarantee loans or grants to finance industrial and business activities in rural areas. The Secretary of Labor must review the application for financial assistance for...

  3. 75 FR 4474 - Energy Conservation Program: Certification, Compliance, and Enforcement Requirements for Certain...

    Science.gov (United States)

    2010-01-28

    ... Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Final rule; technical correction. SUMMARY: This document contains a technical correction to the final rule regarding the certification.... Due to drafting errors, language added to the rule in one amendment was deleted from the rule by...

  4. Turkish Student Teachers' Attitudes toward Teaching in University-Based and Alternative Certification Programs in Turkey

    Science.gov (United States)

    Aksoy, Erdem

    2017-01-01

    The objective of this study is to comparatively analyze the university-based and alternative teacher certification systems in Turkey in terms of the attitudes of trainee teachers toward the teaching profession, explore the reasons of choosing teaching as a career as well as analyze attitudes by gender, department, and graduating faculty type in…

  5. Acquisition of Information to be Used in Programming for Pesticides Applicator Certification Training. Final Report.

    Science.gov (United States)

    Kansas State Univ., Manhattan. Extension Service.

    Five methods were evaluated for training Kansas agricultural producers for certification as Private Pesticide Applicators. The study involved 471 participants throughout the state. Comparison of pre- and post-test scores showed that teaching by video cassette caused the most improvement, followed by the traditional method using a team of…

  6. 77 FR 27798 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

    Science.gov (United States)

    2012-05-11

    ... 4279-2) for the following: Applicant/Location: Tri Marine Samoa, Inc. Principal Product/Purpose: The loan, guarantee, or grant application will establish a new fresh and frozen fish processing facility... is responsible for the review and certification process. Comments should address the two bases for...

  7. 77 FR 39517 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

    Science.gov (United States)

    2012-07-03

    ... 4279-2) for the following: Applicant/Location: NuWeld, Inc. and ARC Tech, Inc. Principal Product..., Washington, DC 20210; or email [email protected] ; or transmit via fax (202) 693-3015 (this is not a toll... certification and, if possible, provide data to assist in the analysis of these issues. Signed at Washington, DC...

  8. Logic-programming language enriches design processes

    Energy Technology Data Exchange (ETDEWEB)

    Kitson, B.; Ow-Wing, K.

    1984-03-22

    With the emergence of a set of high-level CAD tools for programmable logic devices, designers can translate logic into functional custom devices simply and efficiently. The core of the package is a blockstructured hardware description language called PLPL, for ''programmable-logic programming language.'' The cheif advantage of PLPL lies in its multiple input formats, which permit different design approaches for a variety of design problems. The higher the level of the approach, the closer PLPL will come to directly specifying the desired function. Intermediate steps in the design process can be eliminated, along with the errors that might have been generated during those steps.

  9. Analysis of the certification process of computer programs used in a nuclear power plant, using the management systems approach

    International Nuclear Information System (INIS)

    Egan, L.G. Jr.

    1983-12-01

    This dissertation concerns the management of computer programs, the utilization of software in a nuclear power plant, and the methods the nuclear power industry uses in certifying this software is correct and therefore suitable for real time use in a nuclear power plant. The need is established for improved management skills and attitudes prevalent in the nuclear power industry. It is concluded that quality assurance as it exists today in the nuclear power industry is inadequate. It is further concluded that the basis exists to certify software, and that therefore a certification process, although currently non-existent, can and will exist in the near term future

  10. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1991 edition

    International Nuclear Information System (INIS)

    1991-08-01

    The format of this report is a result of recommendations made by the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM) at its 6th meeting in November 1987. The database was at that time maintained on the main frame and it was felt that adapting it for use on a personal computer would allow more flexibility in data processing and reporting. This document supersedes TECDOC-552 ''Directory of National Competent Authorities' Approval Certificates for Package Design and Shipment of Radioactive Material 1990 Edition''. Since publication of TECDOC-552, some modifications affecting the structure of the database and reporting formats were undertaken. These are fully described in ''Working Material: The PACKTRAM Database National Competent Authority Package Approval Certificates, User Guide Rev. 1'', which was released in early 1991. The present report is contained in five tables. In each of these, information is presented in alphabetical order based on the certificate number. This is composed of the issuing Member State's VRI code, followed by a slash, then a three- or four-digit number, another slash and finally a code identifying the type of package involved. ''-85'' is appended to those certificates that were approved on the basis of the 1985 Edition of Safety Series No. 6. Tables 1 to 4 present administrative data including issue and expire, dates, package identification, package serial numbers, modes for which the package/shipment is approved and the edition of Safety Series No. 6 on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table. 5

  11. Development of a Professional Certification in Cancer Patient Education.

    Science.gov (United States)

    Papadakos, Janet; D'souza, Anna; Masse, Adeline; Boyko, Susan; Clarke, Susan; Giuliani, Meredith; MacKinnon, Keira; McBain, Sarah; McCallum, Meg; MacVinnie, Jan; Papadakos, Tina

    2018-04-19

    Patient educators come into the field from diverse professional backgrounds and often lack training in how to teach and develop patient education resources since no formal patient education professional certification program exists. A professional certification program for patient educators would further define the professional scope of practice and reduce variability in performance. The purpose of this study was to (1) determine the level of interest among Canadian cancer patient educators in a patient education professional certification program and (2) determine the competencies to be included in the professional certification program. A 12-item survey was designed by executive members of the Canadian Chapter of the Cancer Patient Education Network. The survey included a list of competencies associated with patient education, and a 4-point Likert scale ranging from "slightly important" to "very important" was used to determine the rank of each competency. The survey was sent to 53 patient educators across Canada. Ninety-two percent of the patient educators are interested in a professional certification program. Patient educators indicated that competencies related to developing patient resources, collaboration, plain language expertise, and health literacy were of most importance. Patient educators support the development of a patient education professional certification program and endorsed the competencies proposed. This information provides the foundation for the creation of a professional certification program for cancer patient educators.

  12. Directory of Certificates of Compliance for Radioactive Materials Packages: Report of NRC Approved Quality Assurance Programs for Radioactive Materials Packages

    International Nuclear Information System (INIS)

    1993-10-01

    This directory contains a Report of NRC Approved Packages (Volume 1), Certificates of Compliance (Volume 2), and a Report of NRC Approved Quality Assurance Programs for Radioactive Materials Packages (Volume 3). The purpose of this directory is to make available a convenient source of information on Quality Assurance Programs and Packagings which have been approved by the US Nuclear Regulatory Commission. Shipments of radioactive material utilizing these packagings must be in accordance with the provisions of 49 CFR section 173.471 and 10 CFR Part 71, as applicable. In satisfying the requirements of Section 71.12, it is the responsibility of the licensees to insure themselves that they have a copy of the current approval and conduct their transportation activities in accordance with an NRC approved quality assurance program

  13. Program design of data acquisition in Windows

    International Nuclear Information System (INIS)

    Cai Jianxin; Yan Huawen

    2004-01-01

    Several methods for the design of data acquisition program based on Microsoft Windows are introduced. Then their respective advantages and disadvantages are totally analyzed. At the same time, the data acquisition modes applicable to each method are also pointed out. It is convenient for data acquisition programmers to develop data acquisition systems. (authors)

  14. Quiet engine program flight engine design study

    Science.gov (United States)

    Klapproth, J. F.; Neitzel, R. E.; Seeley, C. T.

    1974-01-01

    The results are presented of a preliminary flight engine design study based on the Quiet Engine Program high-bypass, low-noise turbofan engines. Engine configurations, weight, noise characteristics, and performance over a range of flight conditions typical of a subsonic transport aircraft were considered. High and low tip speed engines in various acoustically treated nacelle configurations were included.

  15. Certificate Transparency with Privacy

    Directory of Open Access Journals (Sweden)

    Eskandarian Saba

    2017-10-01

    Full Text Available Certificate transparency (CT is an elegant mechanism designed to detect when a certificate authority (CA has issued a certificate incorrectly. Many CAs now support CT and it is being actively deployed in browsers. However, a number of privacy-related challenges remain. In this paper we propose practical solutions to two issues. First, we develop a mechanism that enables web browsers to audit a CT log without violating user privacy. Second, we extend CT to support non-public subdomains.

  16. Healthcare teams over the Internet: programming a certificate-based approach.

    Science.gov (United States)

    Georgiadis, Christos K; Mavridis, Ioannis K; Pangalos, George I

    2003-07-01

    Healthcare environments are a representative case of collaborative environments since individuals (e.g. doctors) in many cases collaborate in order to provide care to patients in a more proficient way. At the same time modern healthcare institutions are increasingly interested in sharing access of their information resources in the networked environment. Healthcare applications over the Internet offer an attractive communication infrastructure at worldwide level but with a noticeably great factor of risk. Security has, therefore, become a major concern. However, although an adequate level of security can be relied upon digital certificates, if an appropriate security model is used, additional security considerations are needed in order to deal efficiently with the above team-work concerns. The already known Hybrid Access Control (HAC) security model supports and handles efficiently healthcare teams with active security capabilities and is capable to exploit the benefits of certificate technology. In this paper we present the way for encoding the appropriate authoritative information in various types of certificates, as well as the overall operational architecture of the implemented access control system for healthcare collaborative environments over the Internet. A pilot implementation of the proposed methodology in a major Greek hospital has shown the applicability of the proposals and the flexibility of the access control provided.

  17. Program Helps Design Tests Of Developmental Software

    Science.gov (United States)

    Hops, Jonathan

    1994-01-01

    Computer program called "A Formal Test Representation Language and Tool for Functional Test Designs" (TRL) provides automatic software tool and formal language used to implement category-partition method and produce specification of test cases in testing phase of development of software. Category-partition method useful in defining input, outputs, and purpose of test-design phase of development and combines benefits of choosing normal cases having error-exposing properties. Traceability maintained quite easily by creating test design for each objective in test plan. Effort to transform test cases into procedures simplified by use of automatic software tool to create cases based on test design. Method enables rapid elimination of undesired test cases from consideration and facilitates review of test designs by peer groups. Written in C language.

  18. Environmental qualification program for new designs

    International Nuclear Information System (INIS)

    Doerffer, K.

    2007-01-01

    Qualification of nuclear power plant equipment and components important to safety (ITS) is an integral part of the design process. The qualification methodology differs based on the severity of service conditions (operational and ambient), to which the ITS equipment is exposed. In Canada, the licensing requirements for environmental qualification for new designs are governed by the Canadian Standard Association (CSA) standard, N290.13-2005 titled 'Environmental Qualification of Equipment for CANDU Nuclear Power Plants' and the pre-consultation draft, 'Requirements for Design of Nuclear Power Plants'(DRD), issued for trial use by the Canadian Nuclear Safety Commission (CNSC) in March 2005. This paper will describe AECL's current Environmental Qualification program developed to comply with the above licensing requirements as applied to new designs. The focus will be given to qualification of ITS systems structures and components (SSC) to harsh conditions occurring due to the Design Basis Accidents (DBA). (author)

  19. Maintenance of Certification for Radiation Oncology

    International Nuclear Information System (INIS)

    Kun, Larry E.; Ang, Kian; Erickson, Beth; Harris, Jay; Hoppe, Richard; Leibel, Steve; Davis, Larry; Hattery, Robert

    2005-01-01

    Maintenance of Certification (MOC) recognizes that in addition to medical knowledge, several essential elements involved in delivering quality care must be developed and maintained throughout one's career. The MOC process is designed to facilitate and document professional development of American Board of Radiology (ABR) diplomates in the essential elements of quality care in Radiation Oncology and Radiologic Physics. ABR MOC has been developed in accord with guidelines of the American Board of Medical Specialties. All Radiation Oncology certificates issued since 1995 are 10-year, time-limited certificates; diplomates with time-limited certificates who wish to maintain specialty certification must complete specific requirements of the American Board of Radiology MOC program. Diplomates with lifelong certificates are not required to participate but are strongly encouraged to do so. Maintenance of Certification is based on documentation of participation in the four components of MOC: (1) professional standing, (2) lifelong learning and self-assessment, (3) cognitive expertise, and (4) performance in practice. Through these components, MOC addresses six competencies-medical knowledge, patient care, interpersonal and communication skills, professionalism, practice-based learning and improvement, and systems-based practice. Details of requirements for components 1, 2, and 3 of MOC are outlined along with aspects of the fourth component currently under development

  20. Designing a leadership development program for surgeons.

    Science.gov (United States)

    Jaffe, Gregory A; Pradarelli, Jason C; Lemak, Christy Harris; Mulholland, Michael W; Dimick, Justin B

    2016-01-01

    Although numerous leadership development programs (LDPs) exist in health care, no programs have been specifically designed to meet the needs of surgeons. This study aimed to elicit practicing surgeons' motivations and desired goals for leadership training to design an evidence-based LDP in surgery. At a large academic health center, we conducted semistructured interviews with 24 surgical faculty members who voluntarily applied and were selected for participation in a newly created LDP. Transcriptions of the interviews were analyzed using analyst triangulation and thematic coding to extract major themes regarding surgeons' motivations and perceived needs for leadership knowledge and skills. Themes from interview responses were then used to design the program curriculum specifically to meet the leadership needs of surgical faculty. Three major themes emerged regarding surgeons' motivations for seeking leadership training: (1) Recognizing key gaps in their formal preparation for leadership roles; (2) Exhibiting an appetite for personal self-improvement; and (3) Seeking leadership guidance for career advancement. Participants' interviews revealed four specific domains of knowledge and skills that they indicated as desired takeaways from a LDP: (1) leadership and communication; (2) team building; (3) business acumen/finance; and (4) greater understanding of the health care context. Interviews with surgical faculty members identified gaps in prior leadership training and demonstrated concrete motivations and specific goals for participating in a formal leadership program. A LDP that is specifically tailored to address the needs of surgical faculty may benefit surgeons at a personal and institutional level. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Design criteria for piping and nozzles program

    International Nuclear Information System (INIS)

    Moore, S.E.; Bryson, J.W.

    1977-01-01

    This report reviews the activities and accomplishments of the Design Criteria for Piping and Nozzles program being conducted by the Oak Ridge National Laboratory for the period July 1, 1975, to September 30, 1976. The objectives of the program are to conduct integrated experimental and analytical stress analysis studies of piping system components and isolated and closely-spaced pressure vessel nozzles in order to confirm and/or improve the adequacy of structural design criteria and analytical methods used to assure the safe design of nuclear power plants. Activities this year included the development of a finite-element program for analyzing two closely spaced nozzles in a cylindrical pressure vessel; a limited-parameter study of vessels with isolated nozzles, finite-element studies of piping elbows, a fatigue test of an out-of-round elbow, summary and evaluation of experimental studies on the elastic-response and fatigue failure of tees, parameter studies on the behavior of flanged joints, publication of fifteen topical reports and papers on various experimental and analytical studies; and the development and acceptance of a number of design rules changes to the ASME Code. 2 figures, 2 tables

  2. Direct Certification in the National School Lunch Program: State Implementation Progress School Year 2010-2011. Report to Congress. Nutrition Assistance Program Report Series. Special Nutrition Programs Report Number CN-11-DC

    Science.gov (United States)

    Moore, Quinn; Conway, Kevin; Kyler, Brandon

    2011-01-01

    This report responds to the legislative requirement of the Food, Conservation, and Energy Act of 2008 (P.L.110-246) to assess the effectiveness of State and local efforts to directly certify children for free school meals under the National School Lunch Program (NSLP). Direct certification is a process conducted by the States and by local…

  3. Computational Materials Program for Alloy Design

    Science.gov (United States)

    Bozzolo, Guillermo

    2005-01-01

    The research program sponsored by this grant, "Computational Materials Program for Alloy Design", covers a period of time of enormous change in the emerging field of computational materials science. The computational materials program started with the development of the BFS method for alloys, a quantum approximate method for atomistic analysis of alloys specifically tailored to effectively deal with the current challenges in the area of atomistic modeling and to support modern experimental programs. During the grant period, the program benefited from steady growth which, as detailed below, far exceeds its original set of goals and objectives. Not surprisingly, by the end of this grant, the methodology and the computational materials program became an established force in the materials communitiy, with substantial impact in several areas. Major achievements during the duration of the grant include the completion of a Level 1 Milestone for the HITEMP program at NASA Glenn, consisting of the planning, development and organization of an international conference held at the Ohio Aerospace Institute in August of 2002, finalizing a period of rapid insertion of the methodology in the research community worlwide. The conference, attended by citizens of 17 countries representing various fields of the research community, resulted in a special issue of the leading journal in the area of applied surface science. Another element of the Level 1 Milestone was the presentation of the first version of the Alloy Design Workbench software package, currently known as "adwTools". This software package constitutes the first PC-based piece of software for atomistic simulations for both solid alloys and surfaces in the market.Dissemination of results and insertion in the materials community worldwide was a primary focus during this period. As a result, the P.I. was responsible for presenting 37 contributed talks, 19 invited talks, and publishing 71 articles in peer-reviewed journals, as

  4. 45 CFR 170.445 - Complete EHR testing and certification.

    Science.gov (United States)

    2010-10-01

    ... Section 170.445 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.445...

  5. NRC Seismic Design Margins Program Plan

    International Nuclear Information System (INIS)

    Cummings, G.E.; Johnson, J.J.; Budnitz, R.J.

    1985-08-01

    Recent studies estimate that seismically induced core melt comes mainly from earthquakes in the peak ground acceleration range from 2 to 4 times the safe shutdown earthquake (SSE) acceleration used in plant design. However, from the licensing perspective of the US Nuclear Regulatory Commission, there is a continuing need for consideration of the inherent quantitative seismic margins because of, among other things, the changing perceptions of the seismic hazard. This paper discusses a Seismic Design Margins Program Plan, developed under the auspices of the US NRC, that provides the technical basis for assessing the significance of design margins in terms of overall plant safety. The Plan will also identify potential weaknesses that might have to be addressed, and will recommend technical methods for assessing margins at existing plants. For the purposes of this program, a general definition of seismic design margin is expressed in terms of how much larger that the design basis earthquake an earthquake must be to compromise plant safety. In this context, margin needs to be determined at the plant, system/function, structure, and component levels. 14 refs., 1 fig

  6. 45 CFR 170.455 - Testing and certification to newer versions of certain standards.

    Science.gov (United States)

    2010-10-01

    ... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.455 Testing and certification to newer versions of certain standards. (a) ONC-ATCBs...

  7. 45 CFR 170.465 - Revocation of authorized testing and certification body status.

    Science.gov (United States)

    2010-10-01

    ... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.465 Revocation of authorized testing and certification body status. (a) Type-1...

  8. ISO and software quality assurance - licensing and certification of software professionals

    Energy Technology Data Exchange (ETDEWEB)

    Hare, J.; Rodin, L.

    1997-11-01

    This report contains viewgraphs on licensing and certifing of software professionals. Discussed in this report are: certification programs; licensing programs; why became certified; certification as a condition of empolyment; certification requirements; and examination structures.

  9. Large coil program support structure conceptual design

    International Nuclear Information System (INIS)

    Litherland, P.S.

    1977-01-01

    The purpose of the Large Coil Program (LCP) is to perform tests on both pool boiling and force cooled superconducting toroidal field coils. The tests will attempt to approximate conditions anticipated in an ignition tokamak. The test requirements resulted in a coil support design which accommodates up to six (6) test coils and is mounted to a structure capable of resisting coil interactions. The steps leading to the present LCP coil support structure design, details on selected structural components, and the basic assembly sequence are discussed

  10. Heuristic program to design Relational Databases

    Directory of Open Access Journals (Sweden)

    Manuel Pereira Rosa

    2009-09-01

    Full Text Available The great development of today’s world determines that the world level of information increases day after day, however, the time allowed to transmit this information in the classrooms has not changed. Thus, the rational work in this respect is more than necessary. Besides, if for the solution of a given type of problem we do not have a working algorism, we have, first to look for a correct solution, then the heuristic programs are of paramount importance to succeed in these aspects. Having into consideration that the design of the database is, essentially, a process of problem resolution, this article aims at proposing a heuristic program for the design of the relating database.

  11. Final safety evaluation report related to the certification of the System 80+ design: Docket Number 52-002. Supplement 1

    International Nuclear Information System (INIS)

    1997-05-01

    This report supplements the final safety evaluation report (FSER) for the System 80+ standard design. The FSER was issued by the US Nuclear Regulatory Commission (NRC) staff as NUREG-1462 in August 1994 to document the NRC staff's review of the System 80+ design. The System 80+ design was submitted by Asea Brown Boveri-Combustion Engineering (ABB-CE), in accordance with the procedures of Subpart B to Part 52 of Title 10 of the Code of Federal Regulations. This supplement documents the NRC staff's review of the changes to the System 80+ design documentation since the issuance of the FSER. ABB-CE made these changes as a result of its review of the System 80+ design details. The NRC staff concludes that the changes to the System 80+ design documentation are acceptable, and that ABB-CE's application for design certification meets the requirements of Subpart B to 10 CFR Part 52 that are applicable and technically relevant to the System 80+ design

  12. Thermal hydraulics and mechanics core design programs

    International Nuclear Information System (INIS)

    Heinecke, J.

    1992-10-01

    The report documents the work performed within the Research and Development Task T hermal hydraulics and mechanics core design programs , funded by the German government. It contains the development of new codes, the extension of existing codes, the qualification and verification of codes and the development of a code library. The overall goal of this work was to adapt the system of thermal hydraulics and mechanics codes to the permanently growing requirements of the status of science and technology

  13. Using Interprofessional Learning for Continuing Education: Development and Evaluation of the Graduate Certificate Program in Health Professional Education for Clinicians.

    Science.gov (United States)

    Henderson, Saras; Dalton, Megan; Cartmel, Jennifer

    2016-01-01

    Health professionals may be expert clinicians but do not automatically make effective teachers and need educational development. In response, a team of health academics at an Australian university developed and evaluated the continuing education Graduate Certificate in Health Professional Education Program using an interprofessional learning model. The model was informed by Collins interactional expertise and Knowles adult learning theories. The team collaboratively developed and taught four courses in the program. Blended learning methods such as web-based learning, face-to-face workshops, and online discussion forums were used. Twenty-seven multidisciplinary participants enrolled in the inaugural program. Focus group interview, self-report questionnaires, and teacher observations were used to evaluate the program. Online learning motivated participants to learn in a collaborative virtual environment. The workshops conducted in an interprofessional environment promoted knowledge sharing and helped participants to better understand other discipline roles, so they could conduct clinical education within a broader health care team context. Work-integrated assessments supported learning relevance. The teachers, however, observed that some participants struggled because of lack of computer skills. Although the interprofessional learning model promoted collaboration and flexibility, it is important to note that consideration be given to participants who are not computer literate. We therefore conducted a library and computer literacy workshop in orientation week which helped. An interprofessional learning environment can assist health professionals to operate outside their "traditional silos" leading to a more collaborative approach to the provision of care. Our experience may assist other organizations in developing similar programs.

  14. PCEE of ATPAE certification program, present and future development; Programa de certificacion PCEE de ATPAE, desarrollo actual y futuro

    Energy Technology Data Exchange (ETDEWEB)

    Plauchu Lima, Alberto [Plachu Consultores, Morelia, Michoacan (Mexico)

    2003-07-01

    In response to the challenges raised to the different actors of the power sector and the users of the electric energy for its optimal application, the Association of Technicians and Professionals in Energy Application (ATPAE) incorporated in its commitments the identification of necessities of specialized professional services, the real availability of these and the necessary actions so that the knowledge, experience and formality are congruent with the required level, quality and trustworthiness for the good performance of those programs, by means of the creation, promotion and development of the Certification Program PCEE (Certificated Personal in Energy Efficiency), as a recognition before the society of the technological dominion, experience and performance of professionals specialized in the power application, qualified and evaluated by the same ATPAE. An anthology of the program is presented and a summary of accomplishments and expectations of future development. [Spanish] En respuesta a los retos planteados a los diferentes actores del sector energetico y de los usuarios de la energia para la aplicacion optima de esta, la Asociacion de Tecnicos y Profesionales en Aplicacion Energetica (ATPAE) incorporo en sus compromisos la identificacion de necesidades de servicios profesionales especializados, la disponibilidad real de estos y las acciones necesarias para que el conocimiento, experiencia y formalidad sean congruentes con el nivel, calidad y confiabilidad requeridos para el buen desempeno de esos programas, mediante la creacion, promocion y desarrollo del Programa de Certificacion PCEE (Personal Certificado en Eficiencia Energetica), como un reconocimiento ante la sociedad del dominio tecnologico, experiencia y desempeno de profesionales especializados en el campo de aplicacion energetica, calificados y evaluados por la propia ATPAE. Se presenta una antologia del programa y un resumen de realizaciones y expectativas de desarrollo futuro.

  15. 7 CFR 205.404 - Granting certification.

    Science.gov (United States)

    2010-01-01

    ... PROVISIONS NATIONAL ORGANIC PROGRAM Certification § 205.404 Granting certification. (a) Within a reasonable... certified operation; (2) Effective date of certification; (3) Categories of organic operation, including... operation's organic certification continues in effect until surrendered by the organic operation or...

  16. Wineries Evaluation of Costs and Benefits of Sustainability Certification Program: The Case of Terra Vitis in France.

    Science.gov (United States)

    Jourjon, Frederique; Chou, Hsia-Chi; Gezart, Anna; Kadison, Amy E; Martinat, Lea; Pomarici, Eugenio; Vecchio, Riccardo

    2016-01-01

    The current paper analyses the evaluation of the costs and benefits of French wineries (N=69) participating in the sustainability program Terra Vitis, a widespread environmental certification scheme within the French wine industry. An online questionnaire was sent to all Terra Vitis participants, in order to analyse the evaluation of economic costs and benefits (together with environmental benefits) as perceived by wineries. Our findings reveal that older participants in the scheme (over 5 years), firms with higher export share (>40% of annual turnover) and cooperative wineries tend to be keener to assign a positive evaluation to the benefits/costs ratio in both the vineyard and the winery. In the context of increasing concerns regarding the economic and environmental performance of the French agricultural sector, such findings and also the patent research could be useful for policy makers and entrepreneurs in defining mainstream normative and corporate strategies. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  17. Design of an internal dosimetry program

    International Nuclear Information System (INIS)

    Wu, C.F.; Goff, T.E.

    2004-01-01

    Measurement of radiation dose is an essential element of radiation protection programs at nuclear facilities. To protect workers and demonstrate compliance with regulatory requirements, dosimetry programs must be established based on sound technical basis. Historically, external exposure was controlled by occupational dose limits. Internal exposure to radionuclides was limited by maximum permissible body burden and maximum permissible concentration. With the issuance of ICRP 26, ICRP 30, DOE Order 5480.11, DOE/EH-0256T, and the new 10 CFR 20, it has become a requirement that internal dose be assessed and the sum of internal and external doses be maintained below regulatory limits. Nuclear facilities are required to have internal dose evaluation programs adequate to demonstrate compliance with radiation protection standards (RPSs). The Waste Isolation Pilot Plant is a DOE facility designed to demonstrate safe disposal of transuranic (TRU) wastes in an ancient salt bed 2,150 feet underground. Internal dose measurement is required to support waste handling activities. This paper describes the technical basis for the WIPP Internal Dosimetry Program. (author)

  18. PULSE Pilot Certification Results

    Directory of Open Access Journals (Sweden)

    Pamela Pape-Lindstrom

    2015-08-01

    Full Text Available The pilot certification process is an ambitious, nationwide endeavor designed to motivate important changes in life sciences education that are in line with the recommendations of the 2011 Vision and Change Report: A Call to Action (American Association for the Advancement of Science [AAAS], 2011.  It is the goal of the certification process to acknowledge departments that have progressed towards full implementation of the tenets of Vision and Change and to motivate departments that have not begun to adopt the recommendations to consider doing so.  More than 70 life science departments applied to be part of the pilot certification process, funded by a National Science Foundation grant, and eight were selected based on initial evidence of transformed and innovative educational practices.  The programs chosen represent a wide variety of schools, including two-year colleges, liberal-arts institutions, regional comprehensive colleges, research universities and minority serving institutions.  Outcomes from this pilot were released June 1, 2015 (www.pulsecommunity.org, with all eight programs being recognized as having progressed along a continuum of change.  Five levels of achievement were defined as PULSE Pilot Progression Levels.  Of the eight departments in the pilot, one achieved “PULSE Progression Level III: Accomplished”.  Six departments achieved “PULSE Progression Level II: Developing” and one pilot department achieved “PULSE Progression Level I: Beginning”.  All of the schools have made significant movement towards the recommendations of Vision and Change relative to a traditional life sciences curriculum.  Overall, the response from the eight pilot schools has been positive. 

  19. 40 CFR 82.161 - Technician certification.

    Science.gov (United States)

    2010-07-01

    ... shall address the subject areas listed in appendix D. (c) Program Approval. Persons may seek approval of... the closed-book certification exam, within 30 days. Programs providing Type I certification using the... percent or higher on the certification exam, no later than 30 days after the program has received the exam...

  20. Design and analysis of environmental monitoring programs

    DEFF Research Database (Denmark)

    Lophaven, Søren Nymand

    2005-01-01

    This thesis describes statistical methods for modelling space-time phenomena. The methods were applied to data from the Danish marine monitoring program in the Kattegat, measured in the five-year period 1993-1997. The proposed model approaches are characterised as relatively simple methods, which...... into account. Thus, it serves as a compromise between existing methods. The space-time model approaches and geostatistical design methods used in this thesis are generally applicable, i.e. with minor modifications they could equally well be applied within areas such as soil and air pollution. In Danish: Denne...

  1. Instructional Design of a Programming Course

    DEFF Research Database (Denmark)

    Caspersen, Michael Edelgaard; Bennedsen, Jens

    2007-01-01

    We present a brief overview of a model for the human cognitive architecture and three learning theories based on this model: cognitive load theory, cognitive apprenticeship, and worked examples (a key area of cognitive skill acquisition). Based on this brief overview we argue how an introductory...... object-oriented programming course is designed according to results of cognitive science and educational psychology in general and cognitive load theory and cognitive skill acquisition in particular; the principal techniques applied are: worked examples, scaffolding, faded guidance, cognitive...

  2. 24 CFR 92.62 - Review of program description and certifications.

    Science.gov (United States)

    2010-04-01

    ... and Urban Development HOME INVESTMENT PARTNERSHIPS PROGRAM Allocation Formula Insular Areas Program... description unless the insular area has failed to submit information sufficient to allow HUD to make the... projects or activities in its program description. (c) HOME Investment Partnership Agreement. After HUD...

  3. Robust Control Design via Linear Programming

    Science.gov (United States)

    Keel, L. H.; Bhattacharyya, S. P.

    1998-01-01

    This paper deals with the problem of synthesizing or designing a feedback controller of fixed dynamic order. The closed loop specifications considered here are given in terms of a target performance vector representing a desired set of closed loop transfer functions connecting various signals. In general these point targets are unattainable with a fixed order controller. By enlarging the target from a fixed point set to an interval set the solvability conditions with a fixed order controller are relaxed and a solution is more easily enabled. Results from the parametric robust control literature can be used to design the interval target family so that the performance deterioration is acceptable, even when plant uncertainty is present. It is shown that it is possible to devise a computationally simple linear programming approach that attempts to meet the desired closed loop specifications.

  4. The State of Neurocritical Care Fellowship Training and Attitudes toward Accreditation and Certification: A Survey of Neurocritical Care Fellowship Program Directors

    Directory of Open Access Journals (Sweden)

    Rajat Dhar

    2017-11-01

    Full Text Available Neurocritical care as a recognized and distinct subspecialty of critical care has grown remarkably since its inception in the 1980s. As of 2016, there were 61 fellowship training programs accredited by the United Council for Neurologic Subspecialties (UCNS in the United States and more than 1,000 UCNS-certified neurointensivists from diverse medical backgrounds. In late 2015, the Program Accreditation, Physician Certification, and Fellowship Training (PACT Committee of the Neurocritical Care Society (NCS was convened to promote and support excellence in the training and certification of neurointensivists. One of the first tasks of the committee was to survey neurocritical care fellowship training program directors to ascertain the current state of fellowship training and attitudes regarding transition to Accreditation Council for Graduate Medical Education (ACGME accreditation of training programs and American Board of Medical Specialties (ABMS certification of physicians. First, the survey revealed significant heterogeneities in the manner of neurocritical care training and a lack of consistency in requirements for fellow procedural competency. Second, although a majority of the 33 respondents indicated that a move toward ACGME accreditation/ABMS certification would facilitate further growth and mainstreaming of training in neurocritical care, many programs do not currently meet administrative requirements and do not receive the level of institutional support that would be needed for such a transition. In summary, the results revealed that there is an opportunity for future harmonization of training standards and that a transition to ACGME accreditation/ABMS certification is preferred. While the results reflect the opinions of more than half of the survey respondents, they represent only a small sample of neurointensivists.

  5. 10 CFR 51.55 - Environmental report-standard design certification.

    Science.gov (United States)

    2010-01-01

    ... costs and benefits of severe accident mitigation design alternatives, and the bases for not incorporating severe accident mitigation design alternatives in the design to be certified. (b) Each applicant... either renders a severe accident mitigation design alternative previously rejected in an environmental...

  6. Large Coil Program magnetic system design study

    International Nuclear Information System (INIS)

    Moses, S.D.; Johnson, N.E.

    1977-01-01

    The primary objective of the Large Coil Program (LCP) is to demonstrate the reliable operation of large superconducting coils to provide a basis for the design principles, materials, and fabrication techniques proposed for the toroidal magnets for the THE NEXT STEP (TNS) and other future tokamak devices. This paper documents a design study of the Large Coil Test Facility (LCTF) in which the structural response of the Toroidal Field (TF) Coils and the supporting structure was evaluated under simulated reactor conditions. The LCP test facility structural system consists of six TF Coils, twelve coil-to-coil torsional restraining beams (torque rings), a central bucking post with base, and a Pulse Coil system. The NASTRAN Finite Element Structural Analysis computer Code was utilized to determine the distribution of deflections, forces, and stresses for each of the TF Coils, torque rings, and the central bucking post. Eleven load conditions were selected to represent probable test operations. Pulse Coils suspended in the bore of the test coil were energized to simulate the pulsed field environment characteristic of the TNS reactor system. The TORMAC Computer Code was utilized to develop the magnetic forces in the TF Coils for each of the eleven loading conditions examined, with or without the Pulse Coils energized. The TORMAC computer program output forces were used directly as input load conditions for the NASTRAN analyses. Results are presented which demonstrate the reliability of the LCTF under simulated reactor operating conditions

  7. Designing to Promote Access, Quality, and Student Support in an Advanced Certificate Programme for Rural Teachers in South Africa

    Directory of Open Access Journals (Sweden)

    Jill W. Fresen

    2009-09-01

    Full Text Available This paper reports on the re-design of the Advanced Certificate in Education (ACE programme, which is offered by the University of Pretoria through distance education (DE to teachers in rural South Africa. In 2007, a team re-designed the programme with the goal of promoting access, quality, and student support. The team included an independent body, the South African Institute of Distance Education (SAIDE, and various education specialists. Training workshops for academics and a comprehensive internal and external review process contributed to the quality of the re-designed programme. Interactive web-based technologies were not included because of poor Internet connectivity; however, the authors note the use and potential of cell phone technology for DE programmes. Student support was enhanced by an additional short contact session, a capping assignment, a CD-ROM, and decentralised tutoring at contact venues. The programme was re-evaluated and approved in 2008, and the re-design methodology now guides similar projects.

  8. Green power programs in Canada : 2002 : Overview of Government green power policies, utility green power development programs, green power and certificate marketing initiatives, and their benefits

    International Nuclear Information System (INIS)

    Bramley, M.; Boustie, S.; Vadgama, J.; Wieler, C.; Pape-Salmon, A.; Holmes, R.

    2003-11-01

    Green power is generally defined as electricity produced from renewable sources, and whose production has low adverse impacts on the environment, human health and communities. Green power has near-zero greenhouse gas (GHG) emissions and includes sources such as wind, hydro, and solar power. Green power offers several environmental benefits, as well as the enhancement of energy security, regional development, economic diversification and the creation of skilled jobs. There are four categories of programs related to green power development in Canada: government green power policies, utility green power development programs, green power marketing initiatives, and green power certificate marketing initiatives. Most of the activities associated with these four categories in 2002 were discussed in this report. However, difficulties with quantification prevented the inclusion of some green power activities in the report, such as (1) the generation of green power not certified or identified by the generator as green power, (2) industry or residential self-generation, (3) net metering, and (4) small government programs. Each category was presented in detail. The information included in the report was based on surveys sent to each program proponent. Follow-up communications and other publicly available information was also included. New programs operating in 2003 or currently under development were listed. refs., 8 tabs

  9. Effect of a manager training and certification program on food safety and hygiene in food service operations.

    Science.gov (United States)

    Kassa, Hailu; Silverman, Gary S; Baroudi, Karim

    2010-05-06

    Food safety is an important public health issue in the U.S. Eating at restaurants and other food service facilities increasingly has been associated with food borne disease outbreaks. Food safety training and certification of food mangers has been used as a method for reducing food safety violations at food service facilities. However, the literature is inconclusive about the effectiveness of such training programs for improving food safety and protecting consumer health. The purpose of this study was to examine the effect of food manger training on reducing food safety violations. We examined food inspection reports from the Toledo/Lucas County Health Department (Ohio) from March 2005 through February 2006 and compared food hygiene violations between food service facilities with certified and without certified food managers. We also examined the impact on food safety of a food service facility being part of a larger group of facilities.Restaurants with trained and certified food managers had significantly fewer critical food safety violations but more non-critical violations than restaurants without certified personnel. Institutional food service facilities had significantly fewer violations than restaurants, and the number of violations did not differ as a function of certification. Similarly, restaurants with many outlets had significantly fewer violations than restaurants with fewer outlets, and training was not associated with lower numbers of violations from restaurants with many outlets. The value of having certified personnel was only observed in independent restaurants and those with few branches. This information may be useful in indicating where food safety problems are most likely to occur. Furthermore, we recommend that those characteristics of institutional and chain restaurants that result in fewer violations should be identified in future research, and efforts made to apply this knowledge at the level of individual restaurants.

  10. 77 FR 4688 - National School Lunch Program: Direct Certification Continuous Improvement Plans Required by the...

    Science.gov (United States)

    2012-01-31

    ... local educational agencies (LEAs) that participate in the NSLP and/or School Breakfast Program to... performance benchmarks for directly certifying for free school meals those children who are members of... requirements, School breakfast and lunch programs. 7 CFR Part 272 Alaska, Civil rights, Claims, Food stamps...

  11. 77 FR 31062 - Programs To Reduce Incidental Capture of Sea Turtles in Shrimp Fisheries; Certifications Pursuant...

    Science.gov (United States)

    2012-05-24

    ... DEPARTMENT OF STATE [Public Notice 7894] Programs To Reduce Incidental Capture of Sea Turtles in... programs to reduce the incidental capture of sea turtles in their shrimp fisheries comparable to the... other countries and one economy do not pose a threat of the incidental taking of sea turtles protected...

  12. An Evaluation of an Alternative Teacher Certification Program: A Matter of Trust

    Science.gov (United States)

    Grubbs, Scott T.

    2009-01-01

    For the internal evaluator, the issue of trust can be one of the more difficult ethical matters to manage. An organization might choose to conduct an internal program evaluation for a variety of reasons, including capitalizing on the abilities of invested stakeholders to assess aspects of a program, building an institutional culture oriented…

  13. 78 FR 79659 - Chronic Wasting Disease Herd Certification Program and Interstate Movement of Farmed or Captive...

    Science.gov (United States)

    2013-12-31

    ...'' syndrome in 1967, the disease is typified by chronic weight loss leading to death. Species currently known... programs must follow the program requirements for animal identification, testing, herd management, and... adequate to prevent ingress or egress of cervids; the regulations do not specify what type of fencing is...

  14. Methodology for forecasting in the Swedish–Norwegian market for el-certificates

    International Nuclear Information System (INIS)

    Wolfgang, Ove; Jaehnert, Stefan; Mo, Birger

    2015-01-01

    In this paper we describe a novel methodology for forecasting in the Swedish–Norwegian el-certificate market, which is a variant of a tradable green certificate scheme. For the forecasting, the el-certificate market is integrated in the electricity-market model EMPS, which has weekly to hourly time-step length, whereas the planning horizon can be several years. Strategies for the certificate inventory are calculated by stochastic dynamic programming, whereas penalty-rates for non-compliance during the annual settlement of certificates are determined endogenously. In the paper the methodology is described, and we show the performance of the model under different cases that can occur in the el-certificate market. The general results correspond to theoretical findings in previous studies for tradable green certificate markets, in particular that price-scenarios spread out in such a way that the unconditional expected value of certificates is relatively stable throughout the planning period. In addition the presented methodologies allows to assess the actual dynamics of the certificate price due to climatic uncertainty. Finally, special cases are indentified where the certificate price becomes excessively high respectively zero, due the design-specific dynamics of the penalty rate. - Highlights: • A method for forecasting in the Swedish–Norwegian el-certificate market is proposed. • The developed model integrates the el-certificate and the power market. • Banking of certificates and the endogenously calculated penalty rate are included. • The certificate value is calculated using Stochastic-Dynamic-Programming. • Price dynamics due to climatic weather uncertainties are assessed and illustrated

  15. Controller design approach based on linear programming.

    Science.gov (United States)

    Tanaka, Ryo; Shibasaki, Hiroki; Ogawa, Hiromitsu; Murakami, Takahiro; Ishida, Yoshihisa

    2013-11-01

    This study explains and demonstrates the design method for a control system with a load disturbance observer. Observer gains are determined by linear programming (LP) in terms of the Routh-Hurwitz stability criterion and the final-value theorem. In addition, the control model has a feedback structure, and feedback gains are determined to be the linear quadratic regulator. The simulation results confirmed that compared with the conventional method, the output estimated by our proposed method converges to a reference input faster when a load disturbance is added to a control system. In addition, we also confirmed the effectiveness of the proposed method by performing an experiment with a DC motor. © 2013 ISA. Published by ISA. All rights reserved.

  16. A Study To Determine Acceptable Curriculum Guidelines for Earning an ESE Culinary Arts Certificate.

    Science.gov (United States)

    Donnarumma, Leopold J.

    This practicum involved designing a special program for a target group of 19 high school Exceptional Student Education students enrolled in a culinary arts vocational program to build and maintain basic culinary arts skills. The program, intended to enable them to qualify for the Florida culinary arts completion certificate, was designed by the…

  17. The Impact of an Advanced Certificate in Education (ACE Program on the Professional Practice of Graduates

    Directory of Open Access Journals (Sweden)

    Ruth Folake Aluko

    2009-09-01

    Full Text Available This paper examines the impact of a distance education program offered by the University of Pretoria, South Africa, on the professional practice of teachers. A pilot study was conducted using a combination of surveys and focus group interviews. Findings reveal that the program was beneficial to graduates’ personal development, professional practice, schools, learners, and colleagues. Further, principals who participated in the study attested to the differences they observed between the graduates and other teachers who had not been exposed to such a program. Suggestions for improvements included the introduction of subjects taught at school as areas of specialization, involvement of school principals in the assessment of enrolled students, visits to schools by the organizers, and exposure of students to the practical opportunities offered by the program (with portfolios that could be a part of the assessment.

  18. 76 FR 78096 - U.S. Advanced Boiling Water Reactor Aircraft Impact Design Certification Amendment

    Science.gov (United States)

    2011-12-16

    ... Environmental Impact: Availability IX. Paperwork Reduction Act Statement X. Regulatory Analysis XI. Regulatory... designs to perform a design-specific assessment of the effects of the impact of a large commercial.... ABWR; one commenter, GE Hitachi Nuclear Energy (GEH), was against the proposed amendment to the U.S...

  19. NASA universities advanced space design program, focus on nuclear engineering

    International Nuclear Information System (INIS)

    Lyon, W.F. III; George, J.A.; Alred, J.W.; Peddicord, K.L.

    1987-01-01

    In January 1985, the National Aeronautics and Space Administration (NASA), in affiliation with the Universities Space Research Association (USRA), inaugurated the NASA Universities Advanced Space Design Program. The purpose of the program was to encourage participating universities to utilize design projects for the senior and graduate level design courses that would focus on topics relevant to the nation's space program. The activities and projects being carried out under the NASA Universities Advanced Space Design Program are excellent experiences for the participants. This program is a well-conceived, well-planned effort to achieve the maximum benefit out of not only the university design experience but also of the subsequent summer programs. The students in the university design classes have the opportunity to investigate dramatic and new concepts, which at the same time have a place in a program of national importance. This program could serve as a very useful model for the development of university interaction with other federal agencies

  20. NDA PDP Program PuO2 increased particle size specification and design

    International Nuclear Information System (INIS)

    Marshall, R.S.; Taggart, D.P.; Becker, G.K.; Woon, W.Y.

    1996-01-01

    Provisions in the National TRU Program Quality Assurance Program Plan require an assessment of performance for nondestructive waste assay (NDA) systems employed in the program. This requirement is in part fulfilled through the use of Performance Demonstration programs. In order to optimize the quality and quantity of information acquired during a given Performance Demonstration Program cycle, the assessment employed is to be carefully specified and designed. The assessment must yield measurement system performance data meaningful with respect to NDA system capability to accommodate attributes of interest known to occur in actual waste forms. The design and specification of the increased particle size PuO 2 PDP working reference materials (WRMs) is directed at providing a straightforward mechanism to assess waste NDA system capability to account for biases introduced by large PuO 2 particles. The increased particle size PuO 2 PDP WRM design addresses actual waste form attributes associated with PuO 2 particle size and distributions thereof, the issue of a known and stable WRM configuration and equally important appropriate certification and tractability considerations

  1. 9 CFR 11.7 - Certification and licensing of designated qualified persons (DQP's).

    Science.gov (United States)

    2010-01-01

    ... program for Department approval. Such outline shall include the organizational structure of such... and diagnosis of soring, and related subjects. The instructor teaching the course must be specified... a DQP if such person has been disqualified by the Secretary from making detection, diagnosis, or...

  2. Green power programs in Canada : 2003 : overview of Government green power policies, utility green power implementation initiatives, green power and certificate marketing programs, and their benefits

    International Nuclear Information System (INIS)

    Whitmore, J.; Bramley, M.; Holmes, R.

    2004-09-01

    Green power is defined as electricity produced from renewable sources, and whose production has low adverse impacts on the environment, human health and communities. Green power has near-zero greenhouse gas (GHG) emissions and includes sources such as wind, hydro, and solar power. It offers several environmental benefits, as well as the enhancement of energy security, regional development, economic diversification and the creation of skilled jobs. There are four categories of programs related to green power development in Canada: government green power policies, utility green power development programs, green power marketing initiatives, and green power certificate marketing initiatives. Most of the activities in Canada associated with these four categories in 2003 were discussed in this report. However, difficulties with quantification prevented the inclusion of some green power activities such as (1) the generation of green power not certified or identified by the generator as green power, (2) industry or residential self-generation, (3) net metering, and (4) small government programs. Green power generation facilities in 2003 totaled 775 MW of capacity compared to 539 MW in 2002. Hydro capacity represented 41 per cent, followed by wind capacity at 40 per cent and wood waste at 17 per cent. Most of the green power generation facilities in 2003 were located in Alberta, followed by British Columbia, Ontario and Quebec. 230 refs., 8 tabs., 1 fig

  3. 75 FR 43207 - Request for Certification of Compliance -Rural Industrialization Loan and Grant Program

    Science.gov (United States)

    2010-07-23

    ... business venture to acquire land, pay for design and entitlement work, and cover short-term operating... Department of Agriculture to make or guarantee loans or grants to finance industrial and business activities...

  4. Archaeology as an Avocation--A Certificate Program at Norwalk Community College.

    Science.gov (United States)

    Vlahos, Olivia

    1979-01-01

    Archaeology as an Avocation program certifies students as competent amateur archaeologists. The article describes how an independent study at local excavation sites grew into a community club that trains its members as archaeologists who help discover the archaeological potential of the community and help federal agencies in planning area…

  5. 75 FR 4911 - Food Stamp Program: Eligibility and Certification Provisions of the Farm Security and Rural...

    Science.gov (United States)

    2010-01-29

    ... the State's Temporary Assistance for Needy Families (TANF) cash assistance or Medicaid programs... is adjusted annually for cost-of-living increases; allow States to simplify the Standard Utility Allowance (SUA) if the State elects to use the SUA rather than actual utility costs for all households...

  6. 40 CFR 1033.645 - Non-OEM component certification program.

    Science.gov (United States)

    2010-07-01

    ... program. 1033.645 Section 1033.645 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...) Pistons. (iii) Piston rings. (iv) Heads (v) Fuel injectors. (vi) Turbochargers (vii) Aftercoolers and... that fails. You may choose to accept that your part is causing an emission problem rather than...

  7. Secondary Mathematics Teacher Differences: Teacher Quality and Preparation in a New York City Alternative Certification Program

    Science.gov (United States)

    Evans, Brian R.

    2011-01-01

    Providing students in urban settings with quality teachers is important for student achievement. This study examined the differences in content knowledge, attitudes toward mathematics, and teacher efficacy among several different types of alternatively certified teachers in a sample from the New York City Teaching Fellows program in order to…

  8. 77 FR 35541 - Chronic Wasting Disease Herd Certification Program and Interstate Movement of Farmed or Captive...

    Science.gov (United States)

    2012-06-13

    ... ``wasting'' syndrome in 1967, the disease is typified by chronic weight loss leading to death. Species... deer, white-tailed deer, black-tailed deer, sika deer, and moose. In the United States, as of March... population has been documented to be low risk for CWD based on a surveillance program. The part also allows...

  9. 47 CFR 64.606 - VRS and IP Relay provider and TRS program certification.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false VRS and IP Relay provider and TRS program... Services and Related Customer Premises Equipment for Persons With Disabilities § 64.606 VRS and IP Relay... including notification in the Federal Register. (2) VRS and IP Relay provider. Any entity desiring to...

  10. A Comprehensive Substance Abuse Counselor Education Program: From Specialty Certificate to Ph.D.

    Science.gov (United States)

    Goodwin, Lloyd R., Jr.

    2006-01-01

    East Carolina University has one of the few comprehensive substance abuse counselor education (SACE) programs in the nation that offers an undergraduate, master's, and doctoral level of preparation in substance abuse counseling. This article describes the evolution of this SACE from its beginning in 1972 to its current status. This comprehensive…

  11. Integrating computer programs for engineering analysis and design

    Science.gov (United States)

    Wilhite, A. W.; Crisp, V. K.; Johnson, S. C.

    1983-01-01

    The design of a third-generation system for integrating computer programs for engineering and design has been developed for the Aerospace Vehicle Interactive Design (AVID) system. This system consists of an engineering data management system, program interface software, a user interface, and a geometry system. A relational information system (ARIS) was developed specifically for the computer-aided engineering system. It is used for a repository of design data that are communicated between analysis programs, for a dictionary that describes these design data, for a directory that describes the analysis programs, and for other system functions. A method is described for interfacing independent analysis programs into a loosely-coupled design system. This method emphasizes an interactive extension of analysis techniques and manipulation of design data. Also, integrity mechanisms exist to maintain database correctness for multidisciplinary design tasks by an individual or a team of specialists. Finally, a prototype user interface program has been developed to aid in system utilization.

  12. Incentive Design and Quality Improvements: Evidence from State Medicaid Nursing Home Pay-for-Performance Programs.

    Science.gov (United States)

    Konetzka, R Tamara; Skira, Meghan M; Werner, Rachel M

    2018-01-01

    Pay-for-performance (P4P) programs have become a popular policy tool aimed at improving health care quality. We analyze how incentive design affects quality improvements in the nursing home setting, where several state Medicaid agencies have implemented P4P programs that vary in incentive structure. Using the Minimum Data Set and the Online Survey, Certification, and Reporting data from 2001 to 2009, we examine how the weights put on various performance measures that are tied to P4P bonuses, such as clinical outcomes, inspection deficiencies, and staffing levels, affect improvements in those measures. We find larger weights on clinical outcomes often lead to larger improvements, but small weights can lead to no improvement or worsening of some clinical outcomes. We find a qualifier for P4P eligibility based on having few or no severe inspection deficiencies is more effective at decreasing inspection deficiencies than using weights, suggesting simple rules for participation may incent larger improvement.

  13. Utilizing Design Information in Aspect-Oriented Programming

    OpenAIRE

    Nagy, I.; Bergmans, Lodewijk; Havinga, W.K.; Aksit, Mehmet; Hirschfeld, Robert; Kowalczyk, Ryszard; Polze, Andreas; Weske, Mathias

    2005-01-01

    Traditionally in aspect-oriented languages, pointcut designators select joinpoints of a program based on lexical information such as explicit names of program elements. However, this reduces the adaptability of software, since it involves too much information that is hard-coded, and often implementationspecific. We claim that this problem can be reduced by referring to program units through their design intentions. Design intention is represented by annotated design information, which describ...

  14. Design and implementation of a unified certification management system based on seismic business

    Science.gov (United States)

    Tang, Hongliang

    2018-04-01

    Many business software for seismic systems are based on web pages, users can simply open a browser and enter their IP address. However, how to achieve unified management and security management of many IP addresses, this paper introduces the design concept based on seismic business and builds a unified authentication management system using ASP technology.

  15. Battleplan for an Unqualified Opinion: How Does the DoD FM Certification Program Help Fix the DoD’s Audit Problem

    Science.gov (United States)

    2016-02-29

    test based certifications to determine if the program enhances the knowledge of the FM workforce and improves financial reporting . This paper found... financial reporting for the federal government.9 This step was extremely important in that it put an emphasis on improving the current state of financial ...likely new to the career field and would not require as in depth knowledge of financial management. Level two is more the intermediate and journeyman

  16. 26 CFR 1.25-4T - Qualified mortgage credit certificate program (Temporary).

    Science.gov (United States)

    2010-04-01

    ... designed to ensure that only those individuals who could not otherwise purchase a residence will benefit... may be issued in connection with the qualified rehabilitation of a residence part of the cost of which... surrendered to other issuers during the calendar year, (v) The date and amount of any previous elections under...

  17. REASONS FOR TECHNOLOGY-BASED COMPANIES CONTEMPLATED BY THE FIRST COMPANY PROGRAM TO SEEK ISO 9001:2008 CERTIFICATION

    Directory of Open Access Journals (Sweden)

    Eduardo Gomes Salgado

    2016-03-01

    Full Text Available The search for implementation of Quality Management Systems aims to continuously improve their results. Thus, for the services and/or products offered to convey trust and credibility, they must be designed within appropriate norms and standards. In this sense, this study seeks to assess the reasons that induce incubated technology-based companies to seek adequacy of their quality management system to the NBR ISO 9001:2008 standard. Through an exploratory survey in twenty-six incubated technology-based companies, a twelve-question questionnaire proposed by Bhuiyan and Alam (2005 was applied. After analyzing the data, it is concluded that the reasons for adequacy of QMS to the NBR ISO 9001:2008 standard are: competitive advantage over competitors; consultant´s approach for implementation; improvement in product quality; and government funding for ISO 9001 certification.  It is found that the consultant´s approach stands out as a strong reason for seeking the adequacy of QMS to the NBR ISO 9001 standard.

  18. A CAD (Classroom Assessment Design) of a Computer Programming Course

    Science.gov (United States)

    Hawi, Nazir S.

    2012-01-01

    This paper presents a CAD (classroom assessment design) of an entry-level undergraduate computer programming course "Computer Programming I". CAD has been the product of a long experience in teaching computer programming courses including teaching "Computer Programming I" 22 times. Each semester, CAD is evaluated and modified…

  19. Program computes single-point failures in critical system designs

    Science.gov (United States)

    Brown, W. R.

    1967-01-01

    Computer program analyzes the designs of critical systems that will either prove the design is free of single-point failures or detect each member of the population of single-point failures inherent in a system design. This program should find application in the checkout of redundant circuits and digital systems.

  20. 7 CFR 205.405 - Denial of certification.

    Science.gov (United States)

    2010-01-01

    ... PROVISIONS NATIONAL ORGANIC PROGRAM Certification § 205.405 Denial of certification. (a) When the certifying... organic program. (e) An applicant for certification who has received a written notification of... 7 Agriculture 3 2010-01-01 2010-01-01 false Denial of certification. 205.405 Section 205.405...

  1. Evaluation Methodology for Void Swelling Susceptibility of APR1400 Reactor Vessel Internals for U.S. NRC Design Certification

    Energy Technology Data Exchange (ETDEWEB)

    Kweon, Hyeong Do; Lee, Do Hwan [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    The APR1400 RVI (Reactor Vessel Internals) operates in harsh conditions, such as long term exposure to neutron irradiation, high temperatures, reactor coolant environment, and other operating loads. Therefore, even though the RVI components are mainly made of austenitic stainless steel which is well known to have good mechanical and corrosion-resistive properties, these operating conditions. The aging is characterized by a chromium depletion along grain boundaries of austenitic stainless steel, a decrease in ductility and fracture toughness of the steel, an increase in yield and ultimate strength of the steel, and a potential volume change due to void formation in the steel. For these reasons, under certain conditions of stress, temperature, and level of irradiation, the void swelling which is one of the challenging degradation mechanisms affecting the integrity of the RVI may appear at specific locations of the RVI, especially due to high neutron fluence and high temperature under localized gamma heating and low velocity of coolant flow. To assess the effects of operating neutron fluences, temperatures and stresses on the material properties changes and the susceptibility to the void swelling, the evaluation methodology of the APR1400 RVI components for U.S. NRC Design Certification was suggested in this paper. The approach to the evaluation is summarized as follows: 1. RVI component list of the APR1400 is collected. 2. Initial screening to determine the evaluation scope is completed using the design values of fluences. 3. Functionality assessments (radiation transport analysis, CFD analysis, structural analysis) are sequentially performed. 4. Susceptibility to the void swelling is identified through ANSYS/USERMAT module. KHNP believes that the proposed methodology which is based on the EPRI works for operating reactors is the best way to evaluate the void swelling for new reactors such as the APR1400.

  2. Final safety evaluation report related to the certification of the System 80{sup +} design (Docket No. 52-002). Volume 2, Chapters 15--22 and appendices

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the system 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of ABB-CE`s System 80 design from which it evolved. Unique features of the System 80+ design include: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 2, contains Chapters 15 through 22 and Appendices A through E.

  3. Final safety evaluation report related to the certification of the System 80{sup +} design (Docket No. 52-002). Volume 1, Chapters 1--14

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the System 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of Abb-CE`s System 80 design from which it evolved. Unique features of the System 80+ design included: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors, and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 1, contains Chapters 1 through 14 of this report.

  4. Final safety evaluation report related to the certification of the System 80+ design (Docket No. 52-002). Volume 2, Chapters 15--22 and appendices

    International Nuclear Information System (INIS)

    1994-08-01

    This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the system 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR section 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of ABB-CE's System 80 design from which it evolved. Unique features of the System 80+ design include: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE's application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 2, contains Chapters 15 through 22 and Appendices A through E

  5. Final safety evaluation report related to the certification of the System 80+ design (Docket No. 52-002). Volume 1, Chapters 1--14

    International Nuclear Information System (INIS)

    1994-08-01

    This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the System 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR section 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of Abb-CE's System 80 design from which it evolved. Unique features of the System 80+ design included: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors, and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE's application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 1, contains Chapters 1 through 14 of this report

  6. Emergency Teacher Certification. ERIC Digest.

    Science.gov (United States)

    Ashburn, Elizabeth A.

    Emergency certification involves the issuance of teaching licenses to individuals who have not completed a traditional college or university teacher education program. This two-page information review examines the problems arising from emergency certification and its relationship to student achievement. Some alternatives to emergency certification…

  7. Design, Fabrication, and Certification of Advanced Modular PV Power Systems Final Technical Progress Report

    International Nuclear Information System (INIS)

    Minyard, G.

    1998-01-01

    This report describes the overall accomplishments and benefits of Solar Electric Specialties Co. (SES) under this Photovoltaic Manufacturing Technology (PVMaT) subcontract. SES addressed design issues related to their modular autonomous PV power supply (MAPPS) and a mobile photogenset. MAPPS investigations included gel-cell batteries mounted horizontally; redisgn of the SES power supply; modified battery enclosure for increased safety and reduced cost; programmable, interactive battery charge controllers; and UL and FM listings. The photogenset systems incorporate generators, battery storage, and PV panels for a mobile power supply. The unit includes automatic oil-change systems for the propane generators, collapsible array mounts for the PV enclosure, and internal stowage of the arrays. Standardizing the products resulted in product lines of MAPPS and Photogensets that can be produced more economically and with shorter lead times, while increasing product quality and reliability. Product assembly and quality control have also been improved and streamlined with the development of standardized assembly processes and QC testing procedures. SES offers the UL-listed MAPPS at about the same price as its previous non-standardized, unlisted products

  8. Designing and implementing a physiology course for a new doctoral occupational therapy program with student feedback.

    Science.gov (United States)

    Goodman, Barbara E; Ikiugu, Moses N

    2017-09-01

    Recently, the Occupational Therapy Department requested a custom-designed medical physiology course for the students in the new occupational therapy doctoral program. The first author, a physiologist with extensive experience in teaching both undergraduate preprofessional and medical students in human physiology, was recruited to design and implement the course. The course was designed to be consistent with the constructivist philosophy that guides the occupational therapy curriculum. The course was offered for the first time during fall/spring 2015/2016 and included both first- and second-year occupational therapy doctoral students. A number of anonymous assessment tools were used to evaluate students' perceptions regarding the effectiveness of various pedagogies used in the course in enhancing their learning. A summative course assessment survey with comments was used at the end of the course. This paper describes the model of course design and the student feedback, which generated some suggestions for improvement of the course. This approach in designing a new course for a new disciplinary group of students should be helpful to other faculty involved in developing courses for health career programs populated by students with variable physiology backgrounds and different educational needs. The final relevant feedback from the course would be to have the students evaluate the usefulness of the course to their future careers immediately following their certification examinations in a year or two and during their subsequent clinical experiences; however, that information will likely be more difficult to obtain. Copyright © 2017 the American Physiological Society.

  9. 78 FR 26103 - Proposed Standard Operating Procedure (SOP) of the Aircraft Certification Service (AIR) Project...

    Science.gov (United States)

    2013-05-03

    ... data, views, or arguments to the above listed address. Please identify ``SOP: AIR-100-001 Standard... Certification Offices (ACOs). The certification programs include: Type certificate (TC), Amended Type Certificate (ATC), Supplemental Type Certificated ATC), Amended Supplemental Type Certificate (ASTC), and...

  10. SASD-tools for program design

    International Nuclear Information System (INIS)

    Gather, K.S.

    1989-01-01

    An overview of Structured Analysis Structured Design (SASD) methodology is given. Some emphasis is put on the time needed to start in a HEP environment with software design methodologies, and on the motivation for SASD. The need for tools is indicated, and examples of their usefulness in analysis and design steps are discussed. Limitations of certain design methods are indicated and additional tools are briefly discussed. Criteria for the selection of tools to be used in large systems design are discussed, and some attention is given to implications for management structures. (orig.)

  11. Computer Aided Design System for Developing Musical Fountain Programs

    Institute of Scientific and Technical Information of China (English)

    刘丹; 张乃尧; 朱汉城

    2003-01-01

    A computer aided design system for developing musical fountain programs was developed with multiple functions such as intelligent design, 3-D animation, manual modification and synchronized motion to make the development process more efficient. The system first analyzed the music form and sentiment using many basic features of the music to select a basic fountain program. Then, this program is simulated with 3-D animation and modified manually to achieve the desired results. Finally, the program is transformed to a computer control program to control the musical fountain in time with the music. A prototype system for the musical fountain was also developed. It was tested with many styles of music and users were quite satisfied with its performance. By integrating various functions, the proposed computer aided design system for developing musical fountain programs greatly simplified the design of the musical fountain programs.

  12. Design and Development of a Learning Design Virtual Internship Program

    Science.gov (United States)

    Ruggiero, Dana; Boehm, Jeff

    2016-01-01

    Incorporation of practical experience in learning design and technology education has long been accepted as an important step in the developmental process of future learning designers. The proliferation of adult online education has increased the number of graduate students who are in need of a practical internship placement but have limited…

  13. DGNB Building Certification Companion

    DEFF Research Database (Denmark)

    Møller, Renate Skovgaard; Rhodes, Michael K.; Larsen, Tine Steen

    2017-01-01

    for sustainable buildings. The literature describes several barriers of entry preventing actors in the industry from seeking sustainability certifications and prioritizing design methods, supporting sustainability in greater numbers. In the newly developed tool, “DGNB building certification companion: Sustainable......-language, easily digestible summaries of various topics regarding sustainability and the DGNB certification scheme. The identified barriers are described in the tool followed by a solution to overcome them. The tool, tested at multiple stages of development and moulded by many individuals both within and outside...... was that this is a desired product on the market. This new approach is expected to dramatically reduce misunderstandings, conflicts, and mistakes during a sustainable design process, helping the design team plan a project to possibly obtain the highest DGNB score if desired and properly documented....

  14. DGNB BUILDING CERTIFICATION COMPANION

    DEFF Research Database (Denmark)

    Møller, Renate Skovgaard; Rhodes, Michael K.; Larsen, Tine Steen

    2018-01-01

    for sustainable buildings. The literature describes several barriers of entry preventing actors in the industry from seeking sustainability certifications and prioritizing design methods, supporting sustainability in greater numbers. In the newly developed tool, “DGNB building certification companion: Sustainable......-language, easily digestible summaries of various topics regarding sustainability and the DGNB certification scheme. The identified barriers are described in the tool followed by a solution to overcome them. The tool, tested at multiple stages of development and moulded by many individuals both within and outside...... was that this is a desired product on the market. This new approach is expected to dramatically reduce misunderstandings, conflicts, and mistakes during a sustainable design process, helping the design team plan a project to possibly obtain the highest DGNB score if desired and properly documented....

  15. Designing Camera Networks by Convex Quadratic Programming

    KAUST Repository

    Ghanem, Bernard; Wonka, Peter; Cao, Yuanhao

    2015-01-01

    be formulated mathematically as a convex binary quadratic program (BQP) under linear constraints. Moreover, we propose an optimization strategy with a favorable trade-off between speed and solution quality. Our solution

  16. Certification and the Branding of HRD

    Science.gov (United States)

    Carliner, Saul

    2012-01-01

    Although calls continue to establish certification, several certifications for human resource development (HRD) practitioners already exist, although none use the name HRD. This Forum explores what those certification programs are and what their availability means to the development of the HRD "brand" (the impressions of the service derived from…

  17. Alternative Certification Pathways: Filling a Gap?

    Science.gov (United States)

    Ludlow, Carlyn

    2013-01-01

    The purpose of this article is to examine the proliferation of alternative certification pathways through an analysis of the role and history of teacher certification and supply followed by a synthesis of national, regional, and state research studies on alternative routes to certification programs and a review of studies conducted on well-known…

  18. 42 CFR 493.638 - Certificate fees.

    Science.gov (United States)

    2010-10-01

    ... for quality control, quality assurance, and proficiency testing purposes) and specialties tested, with... collected by HHS under the laboratory program must be sufficient to cover the general costs of administering... certificates and certificates of compliance, the costs include issuing the certificates, collecting the fees...

  19. GRAPHIC, time-sharing magnet design computer programs at Argonne

    International Nuclear Information System (INIS)

    Lari, R.J.

    1974-01-01

    This paper describes three magnet design computer programs in use at the Zero Gradient Synchrotron of Argonne National Laboratory. These programs are used in the time sharing mode in conjunction with a Tektronix model 4012 graphic display terminal. The first program in called TRIM, the second MAGNET, and the third GFUN. (U.S.)

  20. Designing health promotion programs by watching the market.

    Science.gov (United States)

    Gelb, B D; Bryant, J M

    1992-03-01

    More health care providers and payors are beginning to see health promotion programs as a significant tool for attracting patients, reducing costs, or both. To help design programs that take into account the values and lifestyles of the target group, naturalistic observation can be useful. The authors illustrate the approach in a study of pipeline workers that provided input for the design of nutrition and smoking cessation programs.

  1. Design status of heavy ion injector program

    International Nuclear Information System (INIS)

    Ballard, E.O.; Meyer, E.A.; Rutkowski, H.L.; Shurter, R.P.; Van Haaften, F.W.; Riepe, K.B.

    1985-01-01

    Design and development of a sixteen beam, heavy ion injector is in progress at Los Alamos National Laboratory (LANL) to demonstrate the injector technology for the High Temperature Experiment (HTE) proposed by Lawrence Livermore Laboratory (LBL). The injector design provides for individual ion sources mounted to a support plate defining the sixteen beam array. The beamlets are electrostatically accelerated through a series of electrodes inside an evacuated (10 -7 torr) high voltage (HV) accelerating column

  2. Climate certificates

    International Nuclear Information System (INIS)

    1998-10-01

    Reduced emissions of climate gases at the lowest cost require international cooperation in order to ensure that the most cost-efficient measures are taken. A market for emission rights is one way of achieving this. However, creating the right conditions for such a market to operate requires an unambiguous definition of the product to be traded. In this PM, the Swedish Power Association sketches out how such a product could be defined, and how a market for the resulting unambiguously defined product could be operated internationally, in parallel with other markets for energy products. Trade in climate certificates could become a joint EU approach to achieving common results within the field of climate policy. The main features of the proposal are as follows: Electricity producers would be allowed to issue climate certificates for electricity produced without climate-affecting emissions, e.g. in wind power plants. 1 kWh of electricity produced without emissions would entitle the utility to issue a climate certificate for 1 kWh. Electricity from power stations having low emissions, e.g. modern natural gas-fired plants, would entitle the utility to issue certificates in proportion to how much lower their emissions were in comparison with those from conventional coal-fired power stations. The number of certificates would be reduced by an individual coefficient, related directly to the quantity of climate-affecting emissions from the plant concerned. They would be traded and noted on markets in the various member countries. The certificates would not be nationally restricted, but could be traded across borders. Exchanges would be authorised by national authorities, in accordance with overall EU directives. These authorised exchanges would act as certification bodies, checking that certificates had been properly issued in accordance with a corresponding volume of electricity production. Electricity and certificates could be purchased from different suppliers. The

  3. Status of the HTR 500 design program

    International Nuclear Information System (INIS)

    Baust, E.; Arndt, E.

    1987-01-01

    Since 1982 BBC/HRB have offered the HTR 500 as the follow-on project of the THTR 300, the first large pebble bed reactor. The technical concept of the HTR-500 largely corresponds to the THTR 300 which has been in operation for almost 2 years now. In developing the design concept of the HTR 500 the ideas and demands of the reactor users in the FRG interested in the HTR have been taken into consideration to a large extent. In 1982 these potential users formed a working group 'Arbeitsgemeinschaft Hochtemperaturreaktor' (AHR), representing 16 power indusry companies and in early 1983, awarded a contract to HRB to perform a conceptual design study on the HTR 500. Within this conceptual design study BBC/HRB developed the safety concept of the HTR 500, prepared a detailed description of the overall power plant, and performed a cost calculation. These activities were completed in 1984. Based on the positive results of this conceptual design study, BBC/HRB are expecting to be granted a design contract by the users company Hochtemperaturreaktor GmbH (HRG) to establish the final complete design plans and documents for the HTR 500. (author)

  4. Program packages for dynamics systems analysis and design

    International Nuclear Information System (INIS)

    Athani, V.V.

    1976-01-01

    The development of computer program packages for dynamic system analysis and design are reported. The purpose of developing these program packages is to take the burden of writing computer programs off the mind of the system engineer and to enable him to concentrate on his main system analysis and design work. Towards this end, four standard computer program packages have been prepared : (1) TFANA - starting from system transfer function this program computes transient response, frequency response, root locus and stability by Routh Hurwitz criterion, (2) TFSYN - classical synthesis using algebraic method of Shipley, (3) MODANA - starting from state equations of the system this program computes solution of state equations, controllability, observability and stability, (4) OPTCON - This program obtains solutions of (i) linear regulator problem, (ii) servomechanism problems and (iii) problem of pole placement. The paper describes these program packages with the help of flowcharts and illustrates their use with the help of examples. (author)

  5. Usability Issues in the Design of Novice Programming Systems,

    Science.gov (United States)

    1996-08-01

    lists this as a design principle for novice programming environments. In traditional compiled languages, beginners are also confused by the need to...programming task external knowledge that might interfere with correct under- standing of the language. Most beginner programming errors can be...language for text editing, but [Curtis 1988] found that a textual pseudocode and graphical flowcharts were both bet- ter than natural language in program

  6. Designing an Academic Project Management Program: A Collaboration between a University and a PMI Chapter

    Science.gov (United States)

    Poston, Robin S.; Richardson, Sandra M.

    2011-01-01

    The demand for project management skills in industry is increasing resulting in a higher demand for project management educational programs. Universities are addressing industry demand by developing project management courses, degree offerings and certificate programs that focus on both technical and general project management skills. While…

  7. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1993 ed

    International Nuclear Information System (INIS)

    1993-10-01

    This is the fourth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM, whose memberships consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last two complete calendar years. The 1985 Edition of IAEA Safety Series No. 6, the 'Regulations for the Safe Transport of Radioactive Material'' highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs

  8. Directory of national competent authorities` approval certificates for package design, special form material and shipment of radioactive material. 1995 edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    This is the sixth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA`s transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last complete calendar year. The 1985 Edition of IAEA Safety Series No. 6, the ``Regulations for the Safe Transport of Radioactive Material`` highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs.

  9. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1999 Edition

    International Nuclear Information System (INIS)

    1999-08-01

    This is the tenth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Transport Safety Standards Advisory Committee (TRANSSAC), formerly known as the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM and endorsed by TRANSSAC, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last complete calendar year. The 1985 Edition of IAEA Safety Series No. 6, the 'Regulations for the Safe Transport of Radioactive Material' highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material

  10. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1994 ed

    International Nuclear Information System (INIS)

    1994-08-01

    This is the fifth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last two complete calendar years. The 1985 Edition of IAEA Safety Series No. 6, the ''Regulations for the Safe Transport of Radioactive Material'' highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material

  11. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1996 edition

    International Nuclear Information System (INIS)

    1996-09-01

    This is the seventh annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificated (PACKTRAM) at the recommendation of the then Standing Advisory Group on the Sate Transport of Radioactive Material (SAGSTRAM). The functions of SAGSTRAM were taken over in 1996 by the Transport Safety Standards Advisory Committee (TRANSSAC). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last complete calendar year. The 1985 Edition of IAEA Safety Series No. 6, the ''Regulations for the Safe Transport of Radioactive Material'', highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs

  12. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1995 edition

    International Nuclear Information System (INIS)

    1995-09-01

    This is the sixth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last complete calendar year. The 1985 Edition of IAEA Safety Series No. 6, the ''Regulations for the Safe Transport of Radioactive Material'' highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs

  13. Game Programming Course - Creative Design and Development

    Directory of Open Access Journals (Sweden)

    Jaak Henno

    2008-10-01

    Full Text Available Rapid developments of the Electronic Entertainment - computer and video games, virtual environments, the "Games 3.0" revolution - influences also courses about Games and Virtual Environments. In the following is discussed the course “Games and Virtual Environments” presented in the fall 2007 term in Tallinn University of Technology; the main emphasis of the course was not on programming technology, but on understanding games as a special form of communication and exploring specific features of this form.

  14. 2008 Key Student Outcomes Indicators for BC Diploma, Associate Degree, and Certificate Programs: Survey Results by Institution

    Science.gov (United States)

    Ministry of Advanced Education and Labour Market Development, 2009

    2009-01-01

    The BC Diploma, Associate Degree, and Certificate Student Outcomes (DACSO) Survey (formerly the BC College and Institute Student Outcomes Survey) collects and disseminates information about former students' post-secondary experiences and their subsequent labour market and further education experiences. The survey is administered annually to former…

  15. 78 FR 22794 - World Trade Center Health Program; Certification of Breast Cancer in WTC Responders and Survivors...

    Science.gov (United States)

    2013-04-17

    ... breast cancer for individuals with exposures to PCBs.\\5\\ \\4\\ Lauby-Secretan B, Loomis D, Grosse Y, El...; Certification of Breast Cancer in WTC Responders and Survivors Exposed to PCBs AGENCY: Centers for Disease..., HHS published a final rule in the Federal Register adding certain types of cancer to the List of World...

  16. Pesticide Applicator Training Manual, Category 2 - Forest Pest Control. A Training Program for the Certification of Commercial Pesticide Applicators.

    Science.gov (United States)

    Sinclair, W. A., Comp.

    This manual provides information needed to meet specific standards for certification as a pesticide applicator. Each of the eight chapters deals with a different aspect of pesticide use. Chapter one discusses the problems of use as it relates to safety of humans and the environment. Chapter two is concerned with the identification and diagnosis of…

  17. Development of design program for air handling units

    Energy Technology Data Exchange (ETDEWEB)

    Ham, J. K.; Kim, J. H.; Kim, Y. K.; Kim, Y. I.; Kang, P. Y. [Hyundai Heavy Industries Co., Ltd., Ulsan (Korea, Republic of)

    2000-07-01

    An Air Handling Unit(AHU) has been usually designed by manual calculations. Drawing works together with design calculations should be redone for every designing work, and also be needed to make some corrections of them. In order to design the AHU more efficiently, an AHU program has been developed. The developed program on the Windows environment is operated by the Graphic User Interface(GUI) realized using the Visual Basic Interpreter. The program provides calculation sheet of coils, weights and pressures in a MS-Excel file format as well as design drawing of the AHU in a auto CAD file format idealized by AutoLISP. Those files of the commercial softwares make easier for a designer to transfer design results to the another company for bid via e-mail.

  18. Development of design program for air handling units

    International Nuclear Information System (INIS)

    Ham, J. K.; Kim, J. H.; Kim, Y. K.; Kim, Y. I.; Kang, P. Y.

    2000-01-01

    An Air Handling Unit(AHU) has been usually designed by manual calculations. Drawing works together with design calculations should be redone for every designing work, and also be needed to make some corrections of them. In order to design the AHU more efficiently, an AHU program has been developed. The developed program on the Windows environment is operated by the Graphic User Interface(GUI) realized using the Visual Basic Interpreter. The program provides calculation sheet of coils, weights and pressures in a MS-Excel file format as well as design drawing of the AHU in a auto CAD file format idealized by AutoLISP. Those files of the commercial softwares make easier for a designer to transfer design results to the another company for bid via e-mail

  19. Development of design program for air handling units

    Energy Technology Data Exchange (ETDEWEB)

    Ham, J.K.; Kim, J.H.; Kim, Y.K.; Kim, Y.I.; Kang, P.Y. [Hyundai Heavy Industries Co., Ltd. (Korea)

    2000-11-01

    An air handling unit(AHU) has been usually designed by manual calculations. Drawing works together with design calculations should be redone for every designing work, and also be needed to make some corrections of them. In order to design the AHU more efficiently, an AHU program has been developed. The developed program on the Windows environment is operated by the graphic user interface(GUI) realized using the Visual Basic Interpreter. The program provides calculation sheet of coils, weights and pressures in a MS-Excel file format as well as design drawing of the AHU in a Auto CAD file format idealized by AutoLISP. Those files of the commercial softwares make easier for a designer to transfer design results to the another company for bid via e-mail. (author). 5 refs., 9 figs., 3 tabs.

  20. Directory of certificates of compliance for radioactive materials packages, Certificates of compliance

    International Nuclear Information System (INIS)

    1990-10-01

    This directory contains a Report of the US Nuclear Regulatory Commissions's Approved Packages (Volume 1), Certificates of Compliance (Volume 2), and a Report of NRC Approved Quality Assurance Programs (Volume 3) for Radioactive Materials Packages effective October 1, 1990. The purpose of this directory is to make available a convenient source of information on packaging which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volume 2 of the directory. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by Company name is included in the back of Volume 3 for approved QA programs. The Reports include a listing of all users of easy package design and approved QA programs prior to the publication date of the directory

  1. Directory of Certificates of Compliance for Radioactive Materials Packages: Certificates of Compliance

    International Nuclear Information System (INIS)

    1988-12-01

    This directory contains a Report of the US Nuclear Regulatory Commission's Approved Packages (Volume 1), all Certificates of Compliance (Volume 2), and a Report of NRC Approved Quality Assurance Programs (Volume 3) for Radioactive Material Packages effective October 1, 1988. The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volume 2 of the directory. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by Company name is included in the back of Volume 3 for approved QA programs. The Reports include a listing of all users of each package design and approved QA programs prior to the publication date of the directory

  2. Directory of Certificates of Compliance for Radioactive-Materials Packages. Certificates of Compliance

    International Nuclear Information System (INIS)

    1983-01-01

    This directory contains a Summary Report of the US Nuclear Regulatory Commission's Approved Packages (Volume I), all Certificates of Compliance (Volume 2), and Summary Report of NRC Approved Quality Assurance Programs (Volume 3) for Radioactive Material Packages effective December 31, 1982. The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the back of Volumes 1 and 2 of the directory. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by Company name is included in the back of Volume 3 for approved QA programs. The Summary Reports include a listing of all users of each package design and approved QA programs prior to the publication date of the directory

  3. Optics Program Simplifies Analysis and Design

    Science.gov (United States)

    2007-01-01

    Engineers at Goddard Space Flight Center partnered with software experts at Mide Technology Corporation, of Medford, Massachusetts, through a Small Business Innovation Research (SBIR) contract to design the Disturbance-Optics-Controls-Structures (DOCS) Toolbox, a software suite for performing integrated modeling for multidisciplinary analysis and design. The DOCS Toolbox integrates various discipline models into a coupled process math model that can then predict system performance as a function of subsystem design parameters. The system can be optimized for performance; design parameters can be traded; parameter uncertainties can be propagated through the math model to develop error bounds on system predictions; and the model can be updated, based on component, subsystem, or system level data. The Toolbox also allows the definition of process parameters as explicit functions of the coupled model and includes a number of functions that analyze the coupled system model and provide for redesign. The product is being sold commercially by Nightsky Systems Inc., of Raleigh, North Carolina, a spinoff company that was formed by Mide specifically to market the DOCS Toolbox. Commercial applications include use by any contractors developing large space-based optical systems, including Lockheed Martin Corporation, The Boeing Company, and Northrup Grumman Corporation, as well as companies providing technical audit services, like General Dynamics Corporation

  4. Hanford Site waste tank farm facilities design reconstitution program plan

    International Nuclear Information System (INIS)

    Vollert, F.R.

    1994-01-01

    Throughout the commercial nuclear industry the lack of design reconstitution programs prior to the mid 1980's has resulted in inadequate documentation to support operating facilities configuration changes or safety evaluations. As a result, many utilities have completed or have ongoing design reconstitution programs and have discovered that without sufficient pre-planning their program can be potentially very expensive and may result in end-products inconsistent with the facility needs or expectations. A design reconstitution program plan is developed here for the Hanford waste tank farms facility as a consequence of the DOE Standard on operational configuration management. This design reconstitution plan provides for the recovery or regeneration of design requirements and basis, the compilation of Design Information Summaries, and a methodology to disposition items open for regeneration that were discovered during the development of Design Information Summaries. Implementation of this plan will culminate in an end-product of about 30 Design Information Summary documents. These documents will be developed to identify tank farms facility design requirements and design bases and thereby capture the technical baselines of the facility. This plan identifies the methodology necessary to systematically recover documents that are sources of design input information, and to evaluate and disposition open items or regeneration items discovered during the development of the Design Information Summaries or during the verification and validation processes. These development activities will be governed and implemented by three procedures and a guide that are to be developed as an outgrowth of this plan

  5. Designing fractional factorial split-plot experiments using integer programming

    DEFF Research Database (Denmark)

    Capehart, Shay R.; Keha, Ahmet; Kulahci, Murat

    2011-01-01

    factorial (FF) design, with the restricted randomisation structure to account for the whole plots and subplots. We discuss the formulation of FFSP designs using integer programming (IP) to achieve various design criteria. We specifically look at the maximum number of clear two-factor interactions...

  6. 7 CFR 205.400 - General requirements for certification.

    Science.gov (United States)

    2010-01-01

    ...) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Certification § 205.400 General requirements for certification. A person seeking to receive or maintain organic certification under the... 7 Agriculture 3 2010-01-01 2010-01-01 false General requirements for certification. 205.400...

  7. 7 CFR 205.401 - Application for certification.

    Science.gov (United States)

    2010-01-01

    ... PROVISIONS NATIONAL ORGANIC PROGRAM Certification § 205.401 Application for certification. A person seeking... certification to a certifying agent. The application must include the following information: (a) An organic... 7 Agriculture 3 2010-01-01 2010-01-01 false Application for certification. 205.401 Section 205.401...

  8. A Learning Tool and Program Development for Mechatronics Design Education

    Science.gov (United States)

    Iribe, Masatsugu; Shirahata, Akihiro; Kita, Hiromasa; Sasashige, Yousuke; Dasai, Ryoichi

    In this paper we propose a new type educational program for Mechatronics design which contributes to develop the physical sense and problem solving ability of the students who study Mechatronics design. For this program we provide a new handicraft kit of 4-wheeled car which is composed of inexpensive and commonplace parts, and the performance of the assembled 4-wheeled car is sensitive to its assembly arrangement. And then we implemented this program with the handicraft kit to the university freshmen, and verified its effectiveness, and report the results of the program.

  9. Successful Bullying Prevention Programs: Influence of Research Design, Implementation Features, and Program Components

    Directory of Open Access Journals (Sweden)

    Bryanna Hahn Fox

    2012-12-01

    Full Text Available Bullying prevention programs have been shown to be generally effective in reducing bullying and victimization. However, the effects are relatively small in randomized experiments and greater in quasi-experimental and age-cohort designs. Programs that are more intensive and of longer duration (for both children and teachers are more effective, as are programs containing more components. Several program components are associated with large effect sizes, including parent training or meetings and teacher training. These results should inform the design and evaluation of anti-bullying programs in the future, and a system ofaccreditation of effective programs.

  10. Directory of certificates of compliance for radioactive materials packages. Volume 3, Revision 14: Report of NRC approved quality assurance programs for radioactive materials packages

    International Nuclear Information System (INIS)

    1994-10-01

    This directory contains a Report of NRC Approved Packages (Volume 1), Certificates of Compliance (Volume 2), and a Report of NRC Approved Quality Assurance Programs for Radioactive Materials Packages (Volume 3). The purpose of this directory is to make available a convenient source of information on Quality Assurance Programs and Packagings which have been approved by the US Nuclear Regulatory Commission. Shipments of radioactive material utilizing these packagings must be in accordance with the provisions of 49 CFR section 173.471 and 10 CFR Part 71, as applicable. In satisfying the requirements of Section 71.12, it is the responsibility of the licensees to insure themselves that they have a copy of the current approval and conduct their transportation activities in accordance with an NRC approved quality assurance program

  11. A Program for the Preparation and Certification of School Administrators. Program E--Learning Resource Specialist. In Compliance with Guidelines and Standards for the Development and Approval of Programs of Preparation Leading to Certification [of] School Professional Personnel.

    Science.gov (United States)

    Canzler, Lillian

    The initial and continuing competencies needed by a district-level administrator in educational media or learning resources are outlined. An introductory discussion covers internship program procedures, supervision and evaluation, record keeping and reports, and competencies and skills. Competencies are then defined, the use of the format is…

  12. Electric-powered passenger vehicle design study program. Task 1. Tradeoff studies

    Energy Technology Data Exchange (ETDEWEB)

    Rowlett, B.H.

    1976-09-16

    Using the baseline vehicle and power system design established previously to meet the performance goals of the program, three power system computer simulation programs were prepared for the basic vehicle tradeoff studies. These programs simulate the performance of the power system and vehicle over different types of driving conditions such as maximum power acceleration, deceleration, city driving cycles, and hill climbing, and permit accurate determination of the benefits of the unique hybrid power system, the total energy required for the suburban city driving cycle, and the extremes of the operating envelopes of the components so that component design options can be defined and studied. Component design tradeoff studies were conducted, including sensitivity studies to show the criticality of the various losses and unknowns in the analytical models. Also, preliminary vehicle layout studies were performed to determine the best locations of the power system and the batteries. Three basic design options are identified for further study. Economic studies were initiated using analytical models to establish the complete vehicle weight and cost breakdowns. Preliminary reliability and safety studies were completed, and maintainability and safety certification criteria established. The detailed analysis of the power system has verified the feasibility of the system and of the performance expectations. Also, the feasibility of energy recovery from regenerative braking has been confirmed. The sensitivity analysis of the power system shows that sufficient margin for unknown design variables is provided. The preliminary economic analysis indicates that the most difficult objective of the study will be the selection of the cost and weight relationships which are required to achieve the overall cost objectives.

  13. Software tools to aid Pascal and Ada program design

    Energy Technology Data Exchange (ETDEWEB)

    Jankowitz, H.T.

    1987-01-01

    This thesis describes a software tool which analyses the style and structure of Pascal and Ada programs by ensuring that some minimum design requirements are fulfilled. The tool is used in much the same way as a compiler is used to teach students the syntax of a language, only in this case issues related to the design and structure of the program are of paramount importance. The tool operates by analyzing the design and structure of a syntactically correct program, automatically generating a report detailing changes that need to be made in order to ensure that the program is structurally sound. The author discusses how the model gradually evolved from a plagiarism detection system which extracted several measurable characteristics in a program to a model that analyzed the style of Pascal programs. In order to incorporate more-sophistical concepts like data abstraction, information hiding and data protection, this model was then extended to analyze the composition of Ada programs. The Ada model takes full advantage of facilities offered in the language and by using this tool the standard and quality of written programs is raised whilst the fundamental principles of program design are grasped through a process of self-tuition.

  14. ASDA - Advanced Suit Design Analyzer computer program

    Science.gov (United States)

    Bue, Grant C.; Conger, Bruce C.; Iovine, John V.; Chang, Chi-Min

    1992-01-01

    An ASDA model developed to evaluate the heat and mass transfer characteristics of advanced pressurized suit design concepts for low pressure or vacuum planetary applications is presented. The model is based on a generalized 3-layer suit that uses the Systems Integrated Numerical Differencing Analyzer '85 in conjunction with a 41-node FORTRAN routine. The latter simulates the transient heat transfer and respiratory processes of a human body in a suited environment. The user options for the suit encompass a liquid cooled garment, a removable jacket, a CO2/H2O permeable layer, and a phase change layer.

  15. LOFT fuel modules design, characterization, and fabrication program

    International Nuclear Information System (INIS)

    Russell, M.L.

    1977-06-01

    The loss-of-fluid test [LOFT) fuel modules have evolved from a comprehensive five-year design, characterization, and fabrication program which has resulted in the accomplishment of many technical activities of interest in pressurized water reactor fuel design development and safety research. Information is presented concerning: determination of fundamental high-temperature reactor material properties; design invention related to in-core instrumentation attachment; implementation of advanced and/or unique fuel bundle characterization techniques; implementation of improved fuel bundle fabrication techniques; and planning and execution of a multimillion dollar design, characterization, and fabrication program for pressurized water reactor fuel

  16. An assessment of design control practices and design reconstitution programs in the nuclear power industry

    International Nuclear Information System (INIS)

    Imbro, E.V.

    1991-02-01

    The US Nuclear Regulatory Commission (NRC) and the utilities have identified shortcomings involving the maintenance of well-defined design bases and the availability of the necessary supporting design documentation. Many utilities have embarked on design-document reconstitution programs although there has been no clear consensus regarding what information should be included in design-bases documents, what is the minimum set of necessary design documents to support the design bases, or how missing or deficient design documentation should be handled. The NRC initiated a survey to ascertain the status of design control programs within the industry and the approaches to design-bases documentation used by some utilities. The survey scope included six utilities and one nuclear steam supply system vendor. Conclusions and observations resulting from the survey assessments are provided so that utilities and the NRC can consider actions to improve these programs. 12 refs

  17. Certification/enforcement analysis

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    Industry compliance with minimum energy efficiency standards will be assured through a two-part program approach of certification and enforcement activities. The technical support document (TSD) presents the analyses upon which the proposed rule for assuring that consumer product comply with applicable energy efficiency standards is based. Much of the TSD is based upon support provided DOE by Vitro Laboratories. The OAO Corporation provided additional support in the development of the sampling plan incorporated in the proposed rule. Vitro's recommended approach to appliance certification and enforcement, developed after consideration of various program options, benefits, and impacts, establishes the C/E program framework, general criteria, and procedures for assuring a specified level of energy efficiency performance of covered consumer products. The results of the OAO analysis are given in Volume II of the TSD.

  18. Designing Camera Networks by Convex Quadratic Programming

    KAUST Repository

    Ghanem, Bernard

    2015-05-04

    ​In this paper, we study the problem of automatic camera placement for computer graphics and computer vision applications. We extend the problem formulations of previous work by proposing a novel way to incorporate visibility constraints and camera-to-camera relationships. For example, the placement solution can be encouraged to have cameras that image the same important locations from different viewing directions, which can enable reconstruction and surveillance tasks to perform better. We show that the general camera placement problem can be formulated mathematically as a convex binary quadratic program (BQP) under linear constraints. Moreover, we propose an optimization strategy with a favorable trade-off between speed and solution quality. Our solution is almost as fast as a greedy treatment of the problem, but the quality is significantly higher, so much so that it is comparable to exact solutions that take orders of magnitude more computation time. Because it is computationally attractive, our method also allows users to explore the space of solutions for variations in input parameters. To evaluate its effectiveness, we show a range of 3D results on real-world floorplans (garage, hotel, mall, and airport). ​

  19. Does embedding an ICT certification help align tertiary programs with industry?: A study of CCNA workplace perceptions

    Directory of Open Access Journals (Sweden)

    Dileep Rajendran

    Full Text Available In the last decade there has been an international drive to determine the needs of the ICT industry and skills required by graduates. The intention is to ensure tertiary education is aligned with industry and to suitably prepare students for employment. Among the various initiatives, embedding of industry certification training is one method commonly used to help achieve this. This paper first looks at the literature on industry alignment and the embedding of ICT certifications. It then gives an overview of the changes in the networking courses taught at Wintec over the last ten years. A study of workplace perceptions of the Cisco Certified Network Associate (CCNA courses at this institute is also described, with conclusions drawn about the effectiveness of embedding this certification. In particular the paper investigates how well the courses meet the needs of the ICT industry in the Hamilton/Waikato region. CCNA course topics that are found to be most useful in the workplace are highlighted, as well as the perceived value of the courses for new employees, employers and for people in their career.

  20. Situated Research Design and Methodological Choices in Formative Program Evaluation

    Science.gov (United States)

    Supovitz, Jonathan

    2013-01-01

    Design-based implementation research offers the opportunity to rethink the relationships between intervention, research, and situation to better attune research and evaluation to the program development process. Using a heuristic called the intervention development curve, I describe the rough trajectory that programs typically follow as they…

  1. Web-Based Engine for Program Curriculum Designers

    Science.gov (United States)

    Hamam, H.; Loucif, S.

    2009-01-01

    Educational institutions pay careful attention to the design of program curricula, which represent a framework to meet institutional goals and missions. Of course, the success of any institution depends highly on the quality of its program curriculum. The development of such a curriculum and, more importantly, the evaluation of its quality are…

  2. Perceptions of Interior Design Program Chairs Regarding Credentials for Faculty

    Science.gov (United States)

    Miller, Beth R.

    2017-01-01

    The purpose of this study was to determine whether program chairs in interior design have a preferred degree credential for candidates seeking a full-time, tenure-track position or other full-time position at their institution and to determine if there is a correlation between this preference and the program chair's university's demographics,…

  3. Planning for Program Design and Assessment Using Value Creation Frameworks

    Science.gov (United States)

    Whisler, Laurel; Anderson, Rachel; Brown, Jenai

    2017-01-01

    This article explains a program design and planning process using the Value Creation Framework (VCF) developed by Wenger, Trayner, and de Laat (2011). The framework involves identifying types of value or benefit for those involved in the program, conditions and activities that support creation of that value, data that measure whether the value was…

  4. Designing a flood-risk education program in the Netherlands

    NARCIS (Netherlands)

    Bosschaert, A.; van der Schee, J.; Kuiper, W.

    2016-01-01

    This study focused on designing a flood-risk education program to enhance 15-year-old students’ flood-risk perception. In the flood-risk education program, learning processes were modeled in such a way that the arousal of moderate levels of fear should prompt experiential and analytical information

  5. Designing and Deploying Programming Courses: Strategies, Tools, Difficulties and Pedagogy

    Science.gov (United States)

    Xinogalos, Stelios

    2016-01-01

    Designing and deploying programming courses is undoubtedly a challenging task. In this paper, an attempt to analyze important aspects of a sequence of two courses on imperative-procedural and object-oriented programming in a non-CS majors Department is made. This analysis is based on a questionnaire filled in by fifty students in a voluntary…

  6. Modeling Programs Increase Aircraft Design Safety

    Science.gov (United States)

    2012-01-01

    Flutter may sound like a benign word when associated with a flag in a breeze, a butterfly, or seaweed in an ocean current. When used in the context of aerodynamics, however, it describes a highly dangerous, potentially deadly condition. Consider the case of the Lockheed L-188 Electra Turboprop, an airliner that first took to the skies in 1957. Two years later, an Electra plummeted to the ground en route from Houston to Dallas. Within another year, a second Electra crashed. In both cases, all crew and passengers died. Lockheed engineers were at a loss as to why the planes wings were tearing off in midair. For an answer, the company turned to NASA s Transonic Dynamics Tunnel (TDT) at Langley Research Center. At the time, the newly renovated wind tunnel offered engineers the capability of testing aeroelastic qualities in aircraft flying at transonic speeds near or just below the speed of sound. (Aeroelasticity is the interaction between aerodynamic forces and the structural dynamics of an aircraft or other structure.) Through round-the-clock testing in the TDT, NASA and industry researchers discovered the cause: flutter. Flutter occurs when aerodynamic forces acting on a wing cause it to vibrate. As the aircraft moves faster, certain conditions can cause that vibration to multiply and feed off itself, building to greater amplitudes until the flutter causes severe damage or even the destruction of the aircraft. Flutter can impact other structures as well. Famous film footage of the Tacoma Narrows Bridge in Washington in 1940 shows the main span of the bridge collapsing after strong winds generated powerful flutter forces. In the Electra s case, faulty engine mounts allowed a type of flutter known as whirl flutter, generated by the spinning propellers, to transfer to the wings, causing them to vibrate violently enough to tear off. Thanks to the NASA testing, Lockheed was able to correct the Electra s design flaws that led to the flutter conditions and return the

  7. U.S. licensing process and ABWR certification

    International Nuclear Information System (INIS)

    Quirk, J.F.; Williams, W.A.

    1996-01-01

    Part 50 of Title 10 of the Code of Federal Regulation (CFR) establishes a two-step licensing process by which the U.S. Nuclear Regulatory Committee (NRC) authorizes nuclear reactor plant construction through issuance of a construction permit and authorizes operation by issuance of an operating license. At each stage, the NRC Staff conducts technical reviews and there is potential for public hearings. In 1989, the NRC issued a new, simplified licensing process: Part 52. The purpose of the Part 52 licensing process is to provide a regulatory framework that brings about earlier resolution of licensing issues. Because issues are not resolved early in the Part 50 licensing process, approval of an operating license is not assured until after a significant investment has been made in the plant. Part 52 increases the stability and certainty of the licensing process by providing for the early resolution of safety and environmental issues. The Part 52 licensing process features (1) early site permits, (2) design certification, and (3) combined construction permit and operating licenses. As part of the U.S. Advanced Light Water Reactor (ALWR) Program to revitalize the nuclear option through the integration of government/utility/industry efforts, GE undertook the role of applying for certification for its latest product line, the Advanced Boiling Water Reactor (ABWR), under the U.S. ABWR certification program. The ABWR design is an essentially complete plant. Initial application for design certification was in 1987 under Part 50. GE reapplied in late 1991 under the newly promulgated Part 52. Following seven years of intensive interactions with the NRC and ACRS, GE was awarded the first Final Design Approval (FDA) under Part 52. The Commission initiated rulemaking by publishing the proposed ABWR Certification Rule in the Federal Register in early 1995. Certification is anticipated mid-1996. (J.P.N.)

  8. User-Centered Design of GPU-Based Shader Programs

    DEFF Research Database (Denmark)

    Kraus, Martin

    2012-01-01

    In the context of game engines with graphical user interfaces, shader programs for GPUs (graphics processing units) are an asset for game development that is often used by artists and game developers without knowledge of shader programming. Thus, it is important that non-programmers are enabled...... to explore and exploit the full potential of shader programs. To this end, we develop principles and guidelines for the design of usercentered graphical interfaces for shaders. With the help of several examples, we show how the requirements of a user-centered interface design influence the choice of widgets...

  9. Designing an Elderly Assistance Program Based-on Home Care

    Science.gov (United States)

    Umusya'adah, L.; Juwaedah, A.; Jubaedah, Y.; Ratnasusanti, H.; Puspita, R. H.

    2018-02-01

    PKH (Program Keluarga Harapan) is a program of Indonesia’s Government through the ministry of social directorate to accelerate the poverty reduction and the achievement of Millennium Development Goals (MDGs) target as well as the policies development in social protection and social welfare domain or commonly referred to as Indonesian Conditional Cash Transfer (CCT) Program. This research is motivated that existing participants of the family expectation program (PKH) that already exist in Sumedang, Indoensia, especially in the South Sumedang on the social welfare components is only limited to the health checking, while for assisting the elderly based Home Care program there has been no structured and systematic, where as the elderly still need assistance, especially from the family and community environment. This study uses a method of Research and Development with Model Addie which include analysis, design, development, implementation and evaluation. Participants in this study using purposive sampling, where selected families of PKH who provide active assistance to the elderly with 82 participants. The program is designed consists of program components: objectives, goals, forms of assistance, organizing institutions and implementing the program, besides, program modules include assisting the elderly. Form of assistance the elderly cover physical, social, mental and spiritual. Recommended for families and companions PKH, the program can be implemented to meet the various needs of the elderly. For the elderly should introspect, especially in the health and follow the advice recommended by related parties

  10. Multimedia programming using Max/MSP and TouchDesigner

    CERN Document Server

    Lechner, Patrik

    2014-01-01

    If you want to learn how to use Max 6 and/or TouchDesigner, or work in audio-visual real-time processing, this is the book for you. It is intended for intermediate users of both programs and can be helpful for artists, designers, musicians, VJs, and researchers. A basic understanding of audio principles is advantageous.

  11. Mentor Advice Giving in an Alternative Certification Program for Secondary Science Teaching: Opportunities and Roadblocks in Developing a Knowledge Base for Teaching

    Science.gov (United States)

    Upson Bradbury, Leslie; Koballa, Thomas R., Jr.

    2007-12-01

    Mentoring is often an important component of alternative certification programs, yet little is known about what novices learn about science teaching through mentoring relationships. This study investigated the advice given by two mentor science teachers to their protégés. Findings indicate that mentors gave more advice related to general pedagogical knowledge than science-specific pedagogical content knowledge. Specifically, there was little to no advice related to the topics of inquiry, the nature of science, or the development of scientific literacy. Implications call for an increase in communication between university teacher education programs and school-based mentors, the development of benchmarks to help guide mentor-protégé interactions, and the importance of a multiyear induction process.

  12. Mapping one year’s design processes at an architecture firm specialized in sustainable architecture - How do sustainability certification systems affect design processes?

    DEFF Research Database (Denmark)

    Landgren, Mathilde; Jensen, Lotte Bjerregaard; Heller, Alfred

    2016-01-01

    The current study mapped how a Danish architecture firm integrated sustainability in their projects over a year. All the projects concerned were aimed at being sustainable within the framework of the DGNB certification system. The focus of DGNB is equally divided between environmental, economic...

  13. Generative design visualize, program, and create with processing

    CERN Document Server

    Bohnacker, Hartmut; Laub, Julia; Lazzeroni, Claudius

    2012-01-01

    Generative design is a revolutionary new method of creating artwork, models, and animations from sets of rules, or algorithms. By using accessible programming languages such as Processing, artists and designers are producing extravagant, crystalline structures that can form the basis of anything from patterned textiles and typography to lighting, scientific diagrams, sculptures, films, and even fantastical buildings. Opening with a gallery of thirty-five illustrated case studies, Generative Design takes users through specific, practical instructions on how to create their own visual experiments by combining simple-to-use programming codes with basic design principles. A detailed handbook of advanced strategies provides visual artists with all the tools to achieve proficiency. Both a how-to manual and a showcase for recent work in this exciting new field, Generative Design is the definitive study and reference book that designers have been waiting for.

  14. Short educational programs in optical design and engineering

    Science.gov (United States)

    Voznesenskaya, Anna; Romanova, Galina; Bakholdin, Alexey; Tolstoba, Nadezhda; Ezhova, Kseniia

    2016-09-01

    Globalization and diversification of education in optical engineering causes a number of new phenomena in students' learning paths. Many students have an interest to get some courses in other universities, to study in international environment, to broaden not only professional skills but social links and see the sights as well etc. Participation in short educational programs (e.g. summer / winter schools, camps etc.) allows students from different universities to learn specific issues in their or in some neighbor field and also earn some ECTS for the transcript of records. ITMO University provides a variety of short educational programs in optical design and engineering oriented for different background level, such are: Introduction into optical engineering, Introduction into applied and computer optics, Optical system design, Image modeling and processing, Design of optical devices and components. Depending on students' educational background these programs are revised and adopted each time. Usually the short educational programs last 4 weeks and provide 4 ECTS. The short programs utilize a set of out-of date educational technologies like problem-based learning, case-study and distance-learning and evaluation. Practically, these technologies provide flexibility of the educational process and intensive growth of the learning outcomes. Students are satisfied with these programs very much. In their feedbacks they point a high level of practical significance, experienced teaching staff, scholarship program, excellent educational environment, as well as interesting social program and organizational support.

  15. Trends in CAD education in interior design programs

    OpenAIRE

    Ko, Hye Mi

    1990-01-01

    This research investigated Computer Aided Design (CAD) education in the interior design. program focusing on educators' opinions about creativity aspects including computer application, teaching materials and teaching methods as well as other trends in CAD education. A questionnaire was sent to one hundred eighty-two members of the Interior Design Educators Council (IDEC). A frequency distribution was used on 69 usable returned surveys to describe the sample characteristi...

  16. Certification of solar products - The Florida experience

    International Nuclear Information System (INIS)

    POST, HAROLD N.; ROLAND, JAMES D.; VENTRE, GERARD G.; HUGGINS, JAMES C.

    2000-01-01

    Florida legislation enacted in 1976 directed the Florida Solar Energy Center (FSEC) to develop standards for solar energy systems manufactured or sold in the state, establish criteria for testing the performance of solar energy systems, and provide a means to display compliance with approved performance tests for these systems. This mandate has been effectively implemented for both solar domestic water heating and solar pool heating systems. With growing interest and markets for photovoltaic systems, plans are presently being developed to expand the scope of the mandate to include photovoltaic technology. This paper discusses four complementary facets of a photovoltaic (PV) system certification program. They include PV module performance characterization and rating; PV system design review and approval; examination and authorization of photovoltaic system installers; and inspection and acceptance testing of PV system installation. The suggested photovoltaic system process builds on lessons learned from over 20 years of testing, certifying and labeling of solar thermal collectors, and the certification of solar thermal systems

  17. Generic Certificates. Agricultural Economic Report Number 594.

    Science.gov (United States)

    Glauber, Joseph W.

    The Food Security Act of 1985 authorizes the U.S. Department of Agriculture to issue generic certificates in lieu of cash payments due to program participants and merchants of agricultural products under provisions of several programs. The certificates may be used to acquire stocks held as collateral on government loans or owned by the Commodity…

  18. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1998 edition

    International Nuclear Information System (INIS)

    1998-08-01

    The information contained in this report is given in six tables. Tables 1 to 4 present administrative data including issue and expiration dates, package identification, package serial numbers, modes for which the package/shipments approved and the edition of Safety Series No. 6 on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table 5. Table 6 shows the certificates reported to the IAEA Secretariat by each participating Member State

  19. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2000 edition

    International Nuclear Information System (INIS)

    2000-08-01

    Safety in the transport of radioactive material is dependent on packaging appropriate for the contents being shipped, rather than on operational and/or administrative actions required on the package. The grater the radiological risk posed by the material being moved, the more stringent become the performance for the packaging that can be authorised to contain it. These principles have been expanded since 1061 into a set of regulations that are responsible for safety moving the ever-growing number and complexity of radioactive material shipments throughout the world. The IAEA Regulations for the Safe Transport of Radioactive Material are incorporated into UN regulations, as well as the requirements of other international transport organizations. This is the eleventh report published by the IAEA since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Transport safety Standards Advisory Committee (TRANSSAC). Through the PACKTRAM database, the IAEA collects administrative and technical information provided by the issuing competent authority about package approval certificates

  20. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1997 Edition

    International Nuclear Information System (INIS)

    1997-08-01

    This is the eighth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the then Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The functions of SAGSTRAM were taken over in 1996 by the Transport Safety Standards Advisory Committee (TRANSSAC). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consisted of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who showed a keen interest in the IAEA's transport safety programme. TRANSSAC underscores the importance of data collecting activities and recommends the continued publication of this annual report. The 1985 Edition of Safety Series No. 6, the ''Regulations for the Safe Transport of Radioactive Material'', highlights the role of competent authorities in assuring regulatory compliance in their own countries. The issuance of package approval certificates is an important aspects of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs

  1. The design and implementation of vehicle scrapping programs

    International Nuclear Information System (INIS)

    Sahu, R.; Baxter, R.A.

    1993-01-01

    A number of metropolitan air basins in the US are currently faced with increased difficulty in attaining national and regional clean air standards. Significant controls on stationary sources over the years have allowed mobile sources to become the primary source of air emission in many areas. Programs allowing the use of mobile source offsets for stationary source emission by removal of older, higher emitting vehicles through scrappage programs are, therefore, conceptually attractive and are starting to be implemented. However, achieving success in such scrappage programs is a challenge given the associated technical, economic and social issues. This paper presents a discussion of the important issues that must be considered if vehicle scrappage programs are to be successful, including recent guidance and views of the EPA and state governments on the credits associated with the programs. Although the main focus of such programs is the reduction of criteria pollutants (CO, ROG, NO x , and PM 10 ), the impact on air toxics also has to be considered. The paper will then focus on the technical design of vehicle scrappage programs such that the resulting credits are real, verifiable, enforceable, and cost-effective. Information available under existing vehicle I/M programs along with economic, vehicle maintenance, and geographic data will be used with statistical techniques in order to meet predetermined program goals regarding emissions reduction and cost-effectiveness. A later case-study paper will discuss the actual implementation of such as program in an ozone non-attainment area

  2. 45 CFR 170.410 - Types of testing and certification.

    Science.gov (United States)

    2010-10-01

    ... Section 170.410 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.410 Types...

  3. 45 CFR 170.450 - EHR module testing and certification.

    Science.gov (United States)

    2010-10-01

    ... Section 170.450 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.450 EHR...

  4. Design and Implementation of Modular Software for Programming Mobile Robots

    Directory of Open Access Journals (Sweden)

    Alessandro Farinelli

    2006-03-01

    Full Text Available This article describes a software development toolkit for programming mobile robots, that has been used on different platforms and for different robotic applications. We address design choices, implementation issues and results in the realization of our robot programming environment, that has been devised and built from many people since 1998. We believe that the proposed framework is extremely useful not only for experienced robotic software developers, but also for students approaching robotic research projects.

  5. Lesson 3: Attorney General (AG) Certification

    Science.gov (United States)

    The AG Certification is a letter confirming legal authority to implement the electronic reporting covered by the application and enforce the affected programs using the electronic documents received under those programs.

  6. Fusion reactor design and technology program in China

    International Nuclear Information System (INIS)

    Huang, J.H.

    1994-01-01

    A fusion-fission hybrid reactor program was launched in 1987. The purpose of development of the hybrid reactor is twofold: to solve the problem of nuclear fuel supply for an expected large-scale development of fission reactor plants, and to maintain the momentum of fusion research. The program is described and the activities and progress of the program are presented. Two conceptual designs of an engineering test reactor with tokamak configuration were developed at the Southwestern Institute of Physics and the Institute of Plasma Physics. The results are a tokamak engineering test breeder (TETB) series design and a fusion-fission hybrid reactor design (SSEHR), characterized by a liquid-Li self-cooled blanket and an He-cooled solid tritium breeder blanket respectively. In parallel with the design studies, relevant technological experiments on a small or medium scale have been supported by this program. These include LHCD, ICRH and pellet injection in the area of plasma engineering; neutronics integral experiments with U, Pu, Fe and Be; various irradiation tests of austenitic and ferritic steels, magnetohydrodynamic (MHD) pressure drop experiments using a liquid metal loop; research into permeation barriers for tritium and hydrogen isotopes; solid tritium breeder tests using an in-situ loop in a fission reactor. All these experiments have proceeded successfully. The second step of this program is now starting. It seems reasonable that most of the research carried out in the first step will continue. ((orig.))

  7. Directory of Certificates of Compliance for radioactive materials packages: Certificates of Compliance. Volume 2, Revision 18

    International Nuclear Information System (INIS)

    1995-10-01

    The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volumes 1 and 2. An alphabetical listing by user name is included in the back of Volume 3 of approved QA programs. The reports include a listing of all users of each package design and approved QA programs prior to the publication date

  8. Directory of Certificates of Compliance for radioactive materials packages: Certificates of Compliance. Volume 2, Revision 18

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volumes 1 and 2. An alphabetical listing by user name is included in the back of Volume 3 of approved QA programs. The reports include a listing of all users of each package design and approved QA programs prior to the publication date.

  9. Program Design Report of the CNC Machine Tool(II)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H

    2007-06-15

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology.

  10. Program Design Report of the CNC Machine Tool(II)

    International Nuclear Information System (INIS)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H.

    2007-06-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  11. Program Design Report of the CNC Machine Tool(III)

    International Nuclear Information System (INIS)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H.

    2008-08-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  12. Program Design Report of the CNC Machine Tool(IV)

    International Nuclear Information System (INIS)

    Youm, Ki Un; Lee, I. B.; Youm, J. H.

    2009-09-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  13. Program Design Report of the CNC Machine Tool (I)

    International Nuclear Information System (INIS)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.

    2006-08-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  14. Electron ray tracing programs for gun design and beam transport

    International Nuclear Information System (INIS)

    Herrmannsfeldt, W.B.

    1988-05-01

    Computer simulation of electron and ion sources is made by using a class of computer codes known as gun design programs. In this paper, we shall first list most of the necessary and some optional capabilities of such programs. Then we will briefly note specific codes and/or authors of codes with attention to specialized applications if any. There may be many more such programs in use than are treated here; we are only trying to cover a range of examples, not perform a comprehensive survey

  15. Development of methodology for certification of Type B shipping containers using analytical and testing techniques

    International Nuclear Information System (INIS)

    Sharp, R.R.; Varley, D.T.

    1992-01-01

    The Analysis and Testing Group (WX-11) of the Design Engineering Division at Los Alamos National Laboratory (LANL) is developing methodology for designing and providing a basis for certification of Type B shipping containers. This methodology will include design, analysis, testing, fabrication, procurement, and obtaining certification of the Type B containers, allowing usage in support of the United States Department of Energy programs. While all aspects of the packaging development are included in this methodology, this paper focuses on the use of analysis and testing techniques for enhancing the design and providing a basis for certification. This methodology is based on concurrent engineering principles. Multidisciplinary teams within LANL are responsible for the design and certification of specific Type B Radioactive Material Shipping Containers. These teams include personnel with the various backgrounds and areas of expertise required to support the design, testing, analysis and certification tasks. To demonstrate that a package can pass all the performance requirements, the design needs to be characterized as completely as possible. Understanding package responses to the various environments and how these responses influence the effectiveness of the packaging requires expertise in several disciplines. In addition to characterizing the shipping container designs, these multidisciplinary teams should be able to provide insight into improving new package designs

  16. Fuel channel in-service inspection programs program design for maximum cost effectiveness

    International Nuclear Information System (INIS)

    Van den Brekel, N.C.

    1995-01-01

    Inspection is an integral part of fuel channel life management strategy. Inspection data is used to assess the state of reactor core integrity and provide the information necessary to optimize long term maintenance programs. This paper will provide an overview of the structured approach to developing fuel channel inspection programs within OHN. The inspection programs are designed to balance the resources utilized (cost, outage time, and dose expenditure) with the benefits provided by the inspection data obtained (improved knowledge of component status, degradation mechanisms and rates, etc..). The CANDU community has yet to have a fuel channel operate for a full 30 year design life. Since research programs can not fully simulate reactor operating conditions, inspections become an essential feature of the life management strategy as the components age. Inspection programs often include activities designed to develop predictive capability for long term fuel channel behaviour and provide early warning of changes in behaviour. It should be noted that although this paper addresses the design of fuel channel inspection programs, the basic principles presented can be applied to the design of inspection programs for any major power plant component or system. (author)

  17. Effectiveness of the certificate course in essentials of palliative care program on the knowledge in palliative care among the participants: A cross-sectional interventional study

    Directory of Open Access Journals (Sweden)

    Sushma Bhatnagar

    2018-01-01

    Full Text Available Background: Palliative medicine is an upcoming new specialty aimed at relieving suffering, improving quality of life and comfort care. There are many challenges and barriers in providing palliative care to our patients. The major challenge is lack of knowledge, attitude and skills among health-care providers. Objectives: Evaluate the effectiveness of the certificate course in essentials of palliative care (CCEPC program on the knowledge in palliative care among the participants. Subjects and Methods: All participants (n = 29 of the CCEPC at All India Institute of Medical Sciences, Delhi, giving consent for pretest and posttest were recruited in the study. This educational lecture of 15 h was presented to all the participants following pretest and participants were given same set of questionnaire to be filled as postintervention test. Results: In pretest, 7/29 (24.1% had good knowledge which improved to 24/29 (82.8% after the program. In pretest, 62.1% had average knowledge and only 13.8% had poor knowledge. There was also improvement in communication skills, symptom management, breaking bad news, and pain assessment after completion of the program. Conclusion: The CCEPC is an effective program and improving the knowledge level about palliative care among the participants. The participants should implement this knowledge and the skills in their day-to-day practice to improve the quality of life of patients.

  18. ActionScript 30 Design Patterns Object Oriented Programming Techniques

    CERN Document Server

    Sanders, William

    2008-01-01

    If you're an experienced Flash or Flex developer ready to tackle sophisticated programming techniques with ActionScript 3.0, this hands-on introduction to design patterns takes you step by step through the process. You learn about various types of design patterns and construct small abstract examples before trying your hand at building full-fledged working applications outlined in the book.

  19. Structural design of superconducting magnets for the large coil program

    International Nuclear Information System (INIS)

    Gray, W.H.; Long, C.J.; Stoddart, W.C.T.

    1979-09-01

    The Large Coil Program (LCP) is a research, development, and demonstration effort specifically for the advancement of the technologies involved in the production of large superconducting magnets. This paper presents a review of the status of the structural designs, analysis methods, and verification tests being performed by the participating LCP design teams in the USA, Switzerland, Japan, and the Federal Republic of Germany. The significant structural mechanics concerns that are being investigated with the LCP are presented

  20. Design-reliability assurance program application to ACP600

    International Nuclear Information System (INIS)

    Zhichao, Huang; Bo, Zhao

    2012-01-01

    ACP600 is a newly nuclear power plant technology made by CNNC in China and it is based on the Generation III NPPs design experience and general safety goals. The ACP600 Design Reliability Assurance Program (D-RAP) is implemented as an integral part of the ACP600 design process. A RAP is a formal management system which assures the collection of important characteristic information about plant performance throughout each phase of its life and directs the use of this information in the implementation of analytical and management process which are specifically designed to meet two specific objects: confirm the plant goals and cost effective improvements. In general, typical reliability assurance program have 4 broad functional elements: 1) Goals and performance criteria; 2) Management system and implementing procedures; 3) Analytical tools and investigative methods; and 4) Information management. In this paper we will use the D-RAP technical and Risk-Informed requirements, and establish the RAM and PSA model to optimize the ACP600 design. Compared with previous design process, the D-RAP is more competent for the higher design targets and requirements, enjoying more creativity through an easier implementation of technical breakthroughs. By using D-RAP, the plants goals, system goals, performance criteria and safety criteria can be easier to realize, and the design can be optimized and more rational

  1. The Views of Pre-Service Teachers Who Take Special Teaching Course within the Context of Pedagogical Formation Certificate Program about Micro-Teaching Method and a Physics Lesson Plan

    Science.gov (United States)

    Gurbuz, Fatih

    2015-01-01

    The purpose of this study is to determine the views of the pre-service teachers who received training on pedagogical formation certificate program about micro-teaching method. The study was carried out with a case study method. Semi-structured interviews were used in the study as a data collection tool to gather pre-service teachers' views about…

  2. EGUN: An electron optics and gun design program

    International Nuclear Information System (INIS)

    Herrmannsfeldt, W.B.

    1988-10-01

    The name EGUN has become commonly associated with the program also known as the SLAC Electron Trajectory Program. This document is an updated version of SLAC-226, published in 1979. The program itself has had substantial upgrading since then, but only a few new features are of much concern to the user. Most of the improvements are internal and are intended to improve speed or accuracy. EGUN is designed to compute trajectories of charged particles in electrostatic and magnetostatic fields, including the effects of space charge and self-magnetic fields. Starting options include Child's Law conditions on cathodes of various shapes, as well as used specified initial conditions. Either rectangular or cylindrical symmetry may be used. In the new jargon, the program is a 2-1/2 dimension code meaning 2-D in all fields and 3-D in all particle motion. A Poisson's Equation Solver is used to find the electrostatic fields by using difference equations derived from the boundary conditions. Magnetic fields are to be specified externally, by the user, by using one of several methods including data from another program or arbitrary configurations of coils. This edition of the documentation also covers the program EGN87c, which is a recently developed version of EGUN designed to be used on the newer models of personal computers, small main frames, work stations, etc. The EGN87c program uses the programming language C which is very transportable so the program should operate on any system that supports C. Plotting routines for most common PC monitors are included, and the capability to make hard copy plots on dot-matrix printer-plotters is provided. 18 refs., 7 figs

  3. UML 2 Certification Guide Fundamental & Intermediate Exams

    CERN Document Server

    Weilkiens, Tim

    2006-01-01

    The popular Unified Modeling Language (UML) is both a language and notation developed by the Object Management Group (OMG) used to design and create specifications for software systems. With the recent release of version 2.0 UML, the OMG has started the OMG-Certified UML Professional Program to provide an objective measure of UML knowledge. As a certified UML professional a developer has an important credential to present to employers and clients. Certification also benefits companies looking for skilled UML practitioners by giving them a basis for making hiring and promotion decisions.UML 2 C

  4. Multifaceted Approach to Designing an Online Masters Program.

    Science.gov (United States)

    McNeil, Sara G.; Chernish, William N.; DeFranco, Agnes L.

    At the Conrad N. Hilton College of Hotel and Restaurant Management at the University of Houston (Texas), the faculty and administrators made a conscious effort to take a broad, extensive approach to designing and implementing a fully online masters program. This approach was entered in a comprehensive needs assessment model and sought input from…

  5. Designing and Realization of an Individual Educational Program

    Science.gov (United States)

    Yunusova, Gulnaz R.; Karunas, Ekaterina V.

    2016-01-01

    Relevance of the issue is caused by the change of a knowledge-oriented educational paradigm into an individual-oriented one. This change means that an individual is the most significant value in the modern process of teaching. The aim of the article is to find a theoretical proof for an individual study program design and test it in pedagogical…

  6. Mathematical-programming approaches to test item pool design

    NARCIS (Netherlands)

    Veldkamp, Bernard P.; van der Linden, Willem J.; Ariel, A.

    2002-01-01

    This paper presents an approach to item pool design that has the potential to improve on the quality of current item pools in educational and psychological testing andhence to increase both measurement precision and validity. The approach consists of the application of mathematical programming

  7. development of a computer program for the design of auger

    African Journals Online (AJOL)

    User

    industries. The classical approach to its analysis and design involve the determination of the type and ... program was developed for the above processes to remove the constraints of the classical approach. .... known, one would first decide on the chart. (1-4) that ... integration of a graphics routine to enable the user develop ...

  8. Designing Cross-Cultural Orientation Programs for Business.

    Science.gov (United States)

    Ogden, John D.

    A 1-day orientation workshop for business clients from other cultures is described. Factors in program design that relate to the specific cultural group addressed are discussed, and include such considerations as culture-specific versus culture-general content, professional focus, and the learning style to which the participants are accustomed.…

  9. How to design and deliver a local teaching program

    OpenAIRE

    Limb, Christopher; Whitehurst, Katharine; Gundogan, Buket; Koshy, Kiron; Agha, Riaz

    2017-01-01

    Teaching is an invaluable aspect of any medical or surgical career. Many trainees will find themselves delivering teaching at several stages in their career and in this “How to” article we explain how to design, set up, and deliver a successful teaching program, as well as how to evidence this in your portfolio.

  10. Problem solving and Program design using the TI-92

    NARCIS (Netherlands)

    Ir.ing. Ton Marée; ir Martijn van Dongen

    2000-01-01

    This textbook is intended for a basic course in problem solving and program design needed by scientists and engineers using the TI-92. The TI-92 is an extremely powerful problem solving tool that can help you manage complicated problems quickly. We assume no prior knowledge of computers or

  11. Processing a programming handbook for visual designers and artists

    CERN Document Server

    Reas, Casey

    2014-01-01

    The visual arts are rapidly changing as media moves into the web, mobile devices, and architecture. When designers and artists learn the basics of writing software, they develop a new form of literacy that enables them to create new media for the present, and to imagine future media that are beyond the capacities of current software tools. This book introduces this new literacy by teaching computer programming within the context of the visual arts. It offers a comprehensive reference and text for Processing (www.processing.org), an open-source programming language that can be used by students, artists, designers, architects, researchers, and anyone who wants to program images, animation, and interactivity. Written by Processing's cofounders, the book offers a definitive reference for students and professionals. Tutorial chapters make up the bulk of the book; advanced professional projects from such domains as animation, performance, and installation are discussed in interviews with their creators. This secon...

  12. ITER tungsten divertor design development and qualification program

    Energy Technology Data Exchange (ETDEWEB)

    Hirai, T., E-mail: takeshi.hirai@iter.org [ITER Organization, Route de Vinon sur Verdon, F-13115 Saint Paul lez Durance (France); Escourbiac, F.; Carpentier-Chouchana, S.; Fedosov, A.; Ferrand, L.; Jokinen, T.; Komarov, V.; Kukushkin, A.; Merola, M.; Mitteau, R.; Pitts, R.A.; Shu, W.; Sugihara, M. [ITER Organization, Route de Vinon sur Verdon, F-13115 Saint Paul lez Durance (France); Riccardi, B. [F4E, c/ Josep Pla, n.2, Torres Diagonal Litoral, Edificio B3, E-08019 Barcelona (Spain); Suzuki, S. [JAEA, Fusion Research and Development Directorate JAEA, 801-1 Mukouyama, Naka, Ibaragi 311-0193 (Japan); Villari, R. [Associazione EURATOM-ENEA sulla Fusione, Via Enrico Fermi 45, I-00044 Frascati, Rome (Italy)

    2013-10-15

    Highlights: • Detailed design development plan for the ITER tungsten divertor. • Latest status of the ITER tungsten divertor design. • Brief overview of qualification program for the ITER tungsten divertor and status of R and D activity. -- Abstract: In November 2011, the ITER Council has endorsed the recommendation that a period of up to 2 years be set to develop a full-tungsten divertor design and accelerate technology qualification in view of a possible decision to start operation with a divertor having a full-tungsten plasma-facing surface. To ensure a solid foundation for such a decision, a full tungsten divertor design, together with a demonstration of the necessary high performance tungsten monoblock technology should be completed within the required timescale. The status of both the design and technology R and D activity is summarized in this paper.

  13. Improving Program Design and Assessment with Broadening Participation Resources

    Science.gov (United States)

    Siegfried, D.; Johnson, A.; Thomas, S. H.; Fauver, A.; Detrick, L.

    2012-12-01

    Many theoretical and research-based approaches suggest how to best use mentoring to enhance an undergraduate research program. The Institute for Broadening Participation's Pathways to Engineering and Pathways to Ocean Sciences projects synthesized a set of mentoring studies, theoretical sources, and other texts pertinent to undergraduate research program design into a suite of practical tools that includes an online mentoring manual, an online reference library of mentoring and diversity literature, and practical guides such as Using Social Media to Build Diversity in Your REU. The overall goal is to provide easy-to-access resources that can assist faculty and program directors in implementing or honing the mentoring elements in their research programs for undergraduates. IBP's Online Mentoring Manual addresses common themes, such as modeling, student self-efficacy, career development, retention and evaluation. The Online Diversity Reference Library provides a comprehensive, annotated selection of key policy documents, research studies, intervention studies, and other texts on broadening participation in science, technology, engineering and mathematics. IBP's suite of tools provides the theoretical underpinnings and research findings that can help leaders in education integrate site-appropriate mentoring elements into their educational programs. Program directors and faculty from a variety of program types and disciplines have benefitted from using the Manual and other resources. IBP continues the work of translating and synthesizing theory to practice and welcomes your participation and partnership in that effort.

  14. Directory of certificates of compliance for radioactive materials packages

    International Nuclear Information System (INIS)

    1992-10-01

    This directory contains a Report of the US Nuclear Regulatory Commission's Approved Packages (Volume 1), Certificates of Compliance (Volume 2), and a Report of NRC Approved Quality Assurance Programs (Volume 3), for Radioactive Materials Packages effective October 1, 1992. The purpose of this directory is to make available a convenient source of information on packaging which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volumes 1 and 2. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by Company name is included in the back of Volume 3 for approved QA programs. The reports include a listing of all users of each package-design and approved QA programs prior to the publication date of the directory

  15. Directory of Certificates of Compliance for Radioactive Materials Packages

    International Nuclear Information System (INIS)

    1992-10-01

    This directory contains a Report of the US Nuclear Regulatory Commission's Approved Packages (Volume 1), Certificates of Compliance (Volume 2), and a Report of NRC Approved Quality Assurance Programs (Volume 3), for Radioactive Materials Packages effective October 1, 1992. The purpose of this directory is to make available a convenient source of information on packaging which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volumes 1 and 2. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by Company name is included in the back of Volume 3 for approved QA programs. The reports include a listing of all users of each package-design and approved QA programs prior to the publication date of the directory

  16. Buildings energy management program workshop design. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-12-01

    This document describes activities undertaken by Honeywell's Energy Resources Center for design and development of the format, content, and materials that were used in conducting 129 one-day energy management workshops for specific commercial business audiences. The Building Energy Management Workshop Program was part of a National Workshop Program that was intended to increase awareness of energy-related issues and to encourage energy-conservation actions on the part of commercial and industrial sectors. The total effort included executive conferences for chief executive officers and other senior management personnel; industrial energy-conservation workshops directed at plant management and engineering personnel; vanpooling workshops designed to inform and encourage business in implementing a vanpooling program for employees; and the building energy-management workshops specifically developed for managers, owners, and operators of office and retail facilities, restaurants, and supermarkets. The total program spanned nearly two years and reached approximately 2,500 participants from all parts of the U.S. A detailed followup evaluation is still being conducted to determine the impact of this program in terms of conservation action undertaken by workshop participants.

  17. Radiation protection supervisors certification in Brazil

    International Nuclear Information System (INIS)

    Mendonca Costa, Eduardo; Arraes Monteiro, Iara

    2008-01-01

    In order to accomplish its legal assignments CNEN certifies the qualification of radiation protection supervisors. The current certification process is presented and discussed in this paper. This paper discusses the main points of the certification process including: knowledge tests, stake holder's communication, standards, supervisor responsibilities and profiles. The importance of safety certification of nuclear facilities and radiation protection of public individuals and workers are also discussed. Taking into account the characteristics of the Brazilian Nuclear program, the future improvements and goals in the certification process is also presented. (author)

  18. Basic design of parallel computational program for probabilistic structural analysis

    International Nuclear Information System (INIS)

    Kaji, Yoshiyuki; Arai, Taketoshi; Gu, Wenwei; Nakamura, Hitoshi

    1999-06-01

    In our laboratory, for 'development of damage evaluation method of structural brittle materials by microscopic fracture mechanics and probabilistic theory' (nuclear computational science cross-over research) we examine computational method related to super parallel computation system which is coupled with material strength theory based on microscopic fracture mechanics for latent cracks and continuum structural model to develop new structural reliability evaluation methods for ceramic structures. This technical report is the review results regarding probabilistic structural mechanics theory, basic terms of formula and program methods of parallel computation which are related to principal terms in basic design of computational mechanics program. (author)

  19. Basic design of parallel computational program for probabilistic structural analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kaji, Yoshiyuki; Arai, Taketoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Gu, Wenwei; Nakamura, Hitoshi

    1999-06-01

    In our laboratory, for `development of damage evaluation method of structural brittle materials by microscopic fracture mechanics and probabilistic theory` (nuclear computational science cross-over research) we examine computational method related to super parallel computation system which is coupled with material strength theory based on microscopic fracture mechanics for latent cracks and continuum structural model to develop new structural reliability evaluation methods for ceramic structures. This technical report is the review results regarding probabilistic structural mechanics theory, basic terms of formula and program methods of parallel computation which are related to principal terms in basic design of computational mechanics program. (author)

  20. 40 CFR 68.185 - Certification.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Certification. 68.185 Section 68.185 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... certification that, to the best of the signer's knowledge, information, and belief formed after reasonable...

  1. School Library Media Certification Requirements: 1990 Update.

    Science.gov (United States)

    Perritt, Patsy H.

    1990-01-01

    Presents a compilation of school library media certification requirements taken from responses to a national survey. For each state, existing certificates or endorsements are listed, along with credit hours and/or experience required, whether it is an accredited or approved program, and required subject areas or competencies. A directory of…

  2. Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G.

    1982-03-01

    As a result of prior EPRI-sponsored studies, it was concluded that a research program should be designed and implemented to provide an improved basis for the design, procurement, testing, and operation of large feed pumps with increased reliability and stability over the full range of operating conditions. This two-volume report contains a research plan which is based on a review of the present state of the art and which defines the necessary R and D program and estimates the benefits and costs of the program. The recommended research program consists of 30 interrelated tasks. It is designed to perform the needed research; to verify the results; to develop improved components; and to publish computer-aided design methods, pump specification guidelines, and a troubleshooting manual. Most of the technology proposed in the research plan is applicable to nuclear power plants as well as to fossil-fired plants. This volume discusses the design, performance and failures of feed pumps, and recommendations for research on pump dynamics, design, and specifications.

  3. Personnel training and certification

    International Nuclear Information System (INIS)

    Whittemore, W.L.

    1976-01-01

    In order to make the full benefits of neutron radiography available in the nondestructive test (NDT) field, it has been necessary to formalize its application. A group under the Penetrating Radiation Committee of the American Society for Nondestructive Testing (ASNT) was organized to prepare a recommended practice for neutron radiography. The recommended practices require the establishment of an appropriate certification program. The requirements on the employer to establish and maintain a qualification and certification program are outlined. To conduct a program of nondestructive testing using neutron radiography requires the usual three levels of qualified and certified personnel. The program is administered by a Level III person. Routine exposure, reviews, and reporting of test results are the responsibilities of Level I and Level II personnal. The amount of training and nature of the required practical examination are also specified. The recommended practices document assures users that NDT work in the field of neutron radiography is performed by qualified personnel. Although no training courses are available to provide experience in the depth required by the recommended practices document, SNT-TC-1A, short courses are provided at a number of locations to familarize user's representatives with the interpretation of neutron radiographs and capabilities and limitations of the technique

  4. Utility Green Pricing Programs: Design, Implementation, and Consumer Response

    Energy Technology Data Exchange (ETDEWEB)

    Bird, L.; Swezey, B.; Aabakken, J.

    2004-02-01

    The term green pricing refers to programs offered by utilities in traditionally regulated electricity markets, which allow customers to support the development of renewable energy sources by paying a small premium on their electric bills. Since the introduction of the concept in the United States, the number of unique utility green pricing programs has expanded from just a few programs in 1993 to more than 90 in 2002. About 10% of U.S. utilities offered a green pricing option to about 26 million consumers by the end of 2002. This report provides: (1) aggregate industry data on consumer response to utility programs, which indicate the collective impact of green pricing on renewable energy development nationally; and (2) market data that can be used by utilities as a benchmark for gauging the relative success of their green pricing programs. Specifically, the paper presents current data and trends in consumer response to green pricing, as measured by renewable energy sales, participants, participation rates, and new renewable energy capacity supported. It presents data on various aspects of program design and implementation, such as product pricing, ownership of supplies, retention rates, marketing costs, the effectiveness of marketing techniques, and methods of enrolling and providing value to customers.

  5. MPprimer: a program for reliable multiplex PCR primer design

    Directory of Open Access Journals (Sweden)

    Wang Xiaolei

    2010-03-01

    Full Text Available Abstract Background Multiplex PCR, defined as the simultaneous amplification of multiple regions of a DNA template or multiple DNA templates using more than one primer set (comprising a forward primer and a reverse primer in one tube, has been widely used in diagnostic applications of clinical and environmental microbiology studies. However, primer design for multiplex PCR is still a challenging problem and several factors need to be considered. These problems include mis-priming due to nonspecific binding to non-target DNA templates, primer dimerization, and the inability to separate and purify DNA amplicons with similar electrophoretic mobility. Results A program named MPprimer was developed to help users for reliable multiplex PCR primer design. It employs the widely used primer design program Primer3 and the primer specificity evaluation program MFEprimer to design and evaluate the candidate primers based on genomic or transcript DNA database, followed by careful examination to avoid primer dimerization. The graph-expanding algorithm derived from the greedy algorithm was used to determine the optimal primer set combinations (PSCs for multiplex PCR assay. In addition, MPprimer provides a virtual electrophotogram to help users choose the best PSC. The experimental validation from 2× to 5× plex PCR demonstrates the reliability of MPprimer. As another example, MPprimer is able to design the multiplex PCR primers for DMD (dystrophin gene which caused Duchenne Muscular Dystrophy, which has 79 exons, for 20×, 20×, 20×, 14×, and 5× plex PCR reactions in five tubes to detect underlying exon deletions. Conclusions MPprimer is a valuable tool for designing specific, non-dimerizing primer set combinations with constrained amplicons size for multiplex PCR assays.

  6. An Integrative Approach to Improving an Introductory Weather & Climate Course and Developing an Allied NASA Earth & Space Science Certificate Program for Pre-service Secondary Teachers (Invited)

    Science.gov (United States)

    Morrow, C. A.; Martin-Hansen, L.; Diem, J.; Elliott, W.

    2009-12-01

    An Atlanta-based partnership made up of leaders in science, education, and Georgia’s state-wide STEM Education Initiative are creating an enduring legacy of climate science education for pre-service and in-service teachers in Georgia as well as for underrepresented high school students who participate in an "Early College" program with Georgia State University (GSU). The core elements of our NASA-funded program are to infuse NASA global climate change resources and best pedagogical practice into a popular 4-credit lecture/lab course called “Introduction to Weather & Climate” (GEOG 1112) at GSU, and to establish a sustainable academic program for pre-service teachers in the College of Education called the NASA Earth & Space Science (ESS) Teacher Certificate. The NASA ESS Certificate will require candidates to accomplish the following as part of (or in addition to) standard degree and licensure requirements: 1. successfully complete a graduate section of “Introduction to Weather and Climate” (GEOG 7112), which requires lesson planning related to course content and engagement with GSU's new CO2 monitoring station whose research-quality data will provide unique hands-on opportunities for Metro Atlanta students and teachers; 2) complete an additional advanced course in climate change (GEOG 6784) plus elective hours in physical science disciplines (e.g. astronomy and physics); 3) serve as a lab teaching assistant for GEOG 1112 and a coach for a cadre of Carver Early College students who are taking the course; 4) make at least one of two teaching practica at a Georgia-based NASA Explorer School; and 5) participate or co-present in a week-long, residential, field-based, Summer Institute in Earth & Space Science intended to increase the interest, knowledge, and ability of in-service secondary science educators to fulfill climate-related standards in Earth Science and Earth Systems Science. We will evaluate, document, and disseminate (to the University System of

  7. Directory of certificates of compliance for radioactive materials packages. Certificates of compliance. Volume 2. Revision 9

    International Nuclear Information System (INIS)

    1986-10-01

    This directory contains a Summary Report of NRC Approved Packages (Volume 1). Certificates of Compliance (Volume 2), and a Summary Report of NRC Approved Quality Assurance Programs for Radioactive Material Packages (Volumes 3). The purpose of this directory is make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance number is included at the back of each volume of the directory. The Summary Report includes a listing of all users of each package design prior to the publication date of the directory. Shipments of radioactive material utilizing these packagings must be in accordance with the provisions of 49 CFR 173.471 and 10 CFR Part 71, as applicable. In satisfying the requirements of Section 71.12, it is the responsibility of the licensees to insure them that they have a copy of the current approval and conduct their transportation activities in accordance with an NRC approved quality assurance program. Copies of the current approval may be obtained from the US Nuclear Regulatory Commission Public Document Room files (see Docket No. listed on each certificate) at 1717 H Street, Washington, DC 20555. Note that the general license of 10 CFR 71.12 does not authorize the receipt, possession, use or transfer of byproduct source, or special nuclear material; such authorization must be obtained pursuant to 10 CFR 30 to 36, 40, 50, or 70

  8. Directory of Certificates of Compliance for Radioactive Materials Packages. Certificates of Compliance. Volume 2, Revision 8

    International Nuclear Information System (INIS)

    1985-10-01

    This directory contains a Summary Report of NRC Approved Packages (Volume 1), Certificates of Compliance (Volume 2), and a Summary Report of NRC Approved Quality Assurance Programs for Radioactive Material Packages (Volume 3). The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance number is included at the back of each volume of the directory. The Summary Report includes a listing of all users of each package design prior to the publication date of the directory. Shipments of radioactive material utilizing these packagings must be in accordance with the provisions of 49 CFR 173.471 and 10 CFR Part 71, as applicable. In satisfying the requirements of Section 71.12, it is the responsibility of the licensees to insure them that they have a copy of the current approval and conduct their transportation activities in accordance with an NRC approved quality assurance program. Copies of the current approval may be obtained from the US Nuclear Regulatory Commission Public Document Room files (see Docket No. listed on each certificate) at 1717 H Street, Washington, DC 20555. Note that the general license of 10 CFR 71.12 does not authorize the receipt, possession, use or transfer of byproduct source, or special nuclear material; such authorization must be obtained pursuant to 10 CFR Parts 30 to 36, 40, 50, or 70

  9. Directory of certificates of compliance for radioactive materials packages: certificates of compliance. Volume 2, Revision 7

    International Nuclear Information System (INIS)

    1984-11-01

    This directory contains a Summary Report of NRC Approved Packages (Volume 1), Certificates of Compliance (Volume 2), and a Summary Report of NRC Approved Quality Assurance Programs for Radioactive Material Packages (Volume 3). The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance number is included at the back of each volume of the directory. The Summary Report includes a listing of all users of each package design prior to the publication date of the directory. Shipments of radioactive material utilizing these packagings must be in accordance with the provisions of 49 CFR 173.471 and 10 CFR Part 71, as applicable. In satisfying the requirements of Section 71.12, it is the responsibility of the licensees to insure that they have a copy of the current approval and conduct their transportation activities in accordance with an NRC approved quality assurance program. Copies of the current approval may be obtained from the US Nuclear Regulatory Commission Public Document Room files (see Docket No. listed on each certificate) at 1717 H Street, Washington, DC 20555. Note the general license of 10 CFR 71.12 does not authorize the receipt, possession, use or transfer of byproduct source, or special nuclear material; such authorization must be obtained pursuant to 10 CFR Parts 30 to 36, 40, 50, or 70

  10. Extending cluster lot quality assurance sampling designs for surveillance programs.

    Science.gov (United States)

    Hund, Lauren; Pagano, Marcello

    2014-07-20

    Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance on the basis of the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than simple random sampling. By applying survey sampling results to the binary classification procedure, we develop a simple and flexible nonparametric procedure to incorporate clustering effects into the LQAS sample design to appropriately inflate the sample size, accommodating finite numbers of clusters in the population when relevant. We use this framework to then discuss principled selection of survey design parameters in longitudinal surveillance programs. We apply this framework to design surveys to detect rises in malnutrition prevalence in nutrition surveillance programs in Kenya and South Sudan, accounting for clustering within villages. By combining historical information with data from previous surveys, we design surveys to detect spikes in the childhood malnutrition rate. Copyright © 2014 John Wiley & Sons, Ltd.

  11. Design basis programs and improvements in plant operation

    International Nuclear Information System (INIS)

    Metcalf, M.F.

    1991-01-01

    Public Service Electric and Gas (PSE and G) Company operates three commercial nuclear power plants in southern New Jersey. The three plants are of different designs and vintages (two pressurized water reactors licensed in 1976 and 1980 and one boiling water reactor licensed in 1986). As the industry recognized the need to develop design basis programs, PSE and G also realized the need after a voluntary 52-day shutdown of one unit because of electrical design basis problems. In its drive to be a premier electric utility, PSE and G has been aggressively active in developing design basis documents (DBDs) with supporting projects and refined uses to obtain the expected value and see the return on investment. Progress on Salem is nearly 75% complete, while Hope Creek is 20% complete. To data, PSE and G has experienced success in the use of DBDs in areas such as development of plant modifications, development of the reliability-centered maintenance program, procedure upgrades, improved document retrieval, resolution of regulatory issues, and training. The paper examines the design basis development process, supporting projects, and expected improvements in plant operations as a result of these efforts

  12. Designing and conducting MD/MPH dual degree program in the Medical School of Shiraz University of Medical Sciences.

    Science.gov (United States)

    Salehi, Alireza; Hashemi, Neda; Saber, Mahboobeh; Imanieh, Mohammad Hadi

    2015-07-01

    Many studies have focused on the need of health systems to educated physicians in the clinical prevention, research methodology, epidemiology and health care management and emphasize the important role of this training in the public health promotion. On this basis, Shiraz University of Medical Sciences (SUMS) has established MD/MPH dual degree program since the year 2012. In the current study, Delphi technique was used. Both qualitative and quantitative methods were applied in the Delphi process. The Delphi team members including experts with extensive experience in teaching, research and administration in the field of educational management and health/medical education reached consensus in almost 86% of the questionnaire items through three Delphi rounds. MD/MPH program for SUMS was designed based on the items agreed and thematic analysis used in these rounds. The goals, values, mission and program requirements including the period, the entrance condition, and the number of units, and certification were determined. Accordingly, the courses of the program are presented in parallel with the MD education period. MPH courses consist of 35 units including 16 obligatory and 15 voluntary ones. Designing MD/MPH program in SUMS based on the existent models in the universities in different countries, compatible with educational program of this university and needs of national health system in Iran, can be a beneficial measure towards promoting the students' knowledge and theoretical/practical skills in both individual and social level. Performing some additional research to assess the MD/MPH program and some cohort studies to evaluate the effect of this program on the students' future professional life is recommended.

  13. Re-Imagining Program Development and Re-Engineering Program Design.

    Science.gov (United States)

    Currie, Geoffrey M; Thomas, Catherine J

    2018-05-03

    Program development and review is a central part of institutional and industry quality assurance. Traditional approaches, while well established, present a number of barriers that could undermine process integrity and quality outcomes. Here a new approach to program development and design is explored with the goal of enhancing outcomes for students and institutions. Copyright © 2018 by the Society of Nuclear Medicine and Molecular Imaging, Inc.

  14. Embedded design based virtual instrument program for positron beam automation

    International Nuclear Information System (INIS)

    Jayapandian, J.; Gururaj, K.; Abhaya, S.; Parimala, J.; Amarendra, G.

    2008-01-01

    Automation of positron beam experiment with a single chip embedded design using a programmable system on chip (PSoC) which provides easy interfacing of the high-voltage DC power supply is reported. Virtual Instrument (VI) control program written in Visual Basic 6.0 ensures the following functions (i) adjusting of sample high voltage by interacting with the programmed PSoC hardware, (ii) control of personal computer (PC) based multi channel analyzer (MCA) card for energy spectroscopy, (iii) analysis of the obtained spectrum to extract the relevant line shape parameters, (iv) plotting of relevant parameters and (v) saving the file in the appropriate format. The present study highlights the hardware features of the PSoC hardware module as well as the control of MCA and other units through programming in Visual Basic

  15. DICE: An Object Oriented Programming Environment for Cooperative Engineering Design

    Science.gov (United States)

    1989-03-20

    environment called PARMENIDES /FRULEKIT; PARMENIDES /FRULEKIT supports programming in frames and rules and was developed in LISP at Carnegie-Mellon...the domain of building design and construction. The Blackboard in DICEY-BUILDER is represented as frames in PARMENIDES , while the KMs are implemented... PARMENIDES fo rart omat format d a b C /envelope BLACKBOAR D machine to machine (’BLACKBOARD l m message f il transfer message p read •d message format J

  16. A Competence-Based Curriculum Design for Entrepreneurship Study Program

    Directory of Open Access Journals (Sweden)

    Priska J.R. Siagian

    2011-08-01

    Full Text Available Indonesia is affected by global crisis. Increasing the number of entrepreneurs is one of many solutions to increase the economic growth in Indonesia. The number of entrepreneurs in Indonesia to leverage the economic growth is still limited. Entrepreneurs can be prepared through an Entrepreneurship Study Program. Entrepreneurship Study Program attempts to create qualified entrepreneurs who have relevant competences. In order to create a qualified entrepreneurs, the Entrepreneurial Studies Program requires a competency-based curriculum that will support the educational process and provide all the necessary to become future entrepreneurs who can survive through a global challenge. This research aims to design a competence-based curriculum for entrepreneurial study and uses Quality Function Deployment (QFD as the major tool to design the competence-based curriculum. From the QFD process, this research finds core and elective courses for the Entrepreneurship Study Program. The result shows the competences covered by the courses and sequence, credits, and teaching methods for each course. The competences prepared the potential entrepreneurs can be achieved through specific courses which can be acquired within 8 semesters.

  17. TESMA: Requirements and Design of a Tool for Educational Programs

    Directory of Open Access Journals (Sweden)

    Nicolas Guelfi

    2017-03-01

    Full Text Available Defining and managing teaching programs at universities or other institutions is a complex task for which there is not much support in terms of methods and tools. This task becomes even more critical when the time comes to obtain certifications w.r.t. official standards. In this paper, we present an on-going project called TESMA, whose objective is to provide an open-source tool dedicated to the specification and management (including certification of teaching programs. An in-depth market analysis regarding related tools and conceptual frameworks of the project is presented. This tool has been engineered using a development method called Messir for its requirements elicitation and introduces a domain-specific language dedicated to the teaching domain. This paper presents the current status of this project and the future activities planned.

  18. Environmental monitoring program design for uranium refining and conversion operations

    International Nuclear Information System (INIS)

    1984-08-01

    The objective of this study was to develop recommendations for the design of environmental monitoring programs at Canadian uranium refining and conversion operations. In order to develop monitoring priorities, chemical and radioactive releases to the air and water were developed for reference uranium refining and conversion facilities. The relative significance of the radioactive releases was evaluated through a pathways analysis which estimated dose to individual members of the critical receptor group. The effects of chemical releases to the environment were assessed by comparing predicted air and water contaminant levels to appropriate standards or guidelines. For the reference facilities studied, the analysis suggested that environmental effects are likely to be dominated by airborne release of both radioactive and nonradioactive contaminants. Uranium was found to be the most important radioactive species released to the air and can serve as an overall indicator of radiological impacts for any of the plants considered. The most important nonradioactive air emission was found to be fluoride (as hydrogen fluoride) from the uranium hexafluoride plant. For the uranium trioxide and uranium dioxide plants, air emissions of oxides of nitrogen were considered to be most important. The study recommendations for the design of an environmental monitoring program are based on consideration of those factors most likely to affect local air and water quality, and human radiation exposure. Site- and facility-specific factors will affect monitoring program design and the selection of components such as sampling media, locations and frequency, and analytical methods

  19. Building interactive simulations in a Web page design program.

    Science.gov (United States)

    Kootsey, J Mailen; Siriphongs, Daniel; McAuley, Grant

    2004-01-01

    A new Web software architecture, NumberLinX (NLX), has been integrated into a commercial Web design program to produce a drag-and-drop environment for building interactive simulations. NLX is a library of reusable objects written in Java, including input, output, calculation, and control objects. The NLX objects were added to the palette of available objects in the Web design program to be selected and dropped on a page. Inserting an object in a Web page is accomplished by adding a template block of HTML code to the page file. HTML parameters in the block must be set to user-supplied values, so the HTML code is generated dynamically, based on user entries in a popup form. Implementing the object inspector for each object permits the user to edit object attributes in a form window. Except for model definition, the combination of the NLX architecture and the Web design program permits construction of interactive simulation pages without writing or inspecting code.

  20. Design reliability assurance program for Korean next generation reactor

    International Nuclear Information System (INIS)

    Lee, Beom-Su; Han, Jin-Kyu; Na, Jang Hwan; Yoo, Kyung Yeong

    1997-01-01

    The Korean Next Generation Reactor (KNGR) project is to develop standardized nuclear power plant design for the construction of future nuclear power plants in Korea. The main purpose of the KNGR project is to develop the advanced nuclear power plants, which enhance safety and economics significantly through the incorporation of design concepts for severe accident prevention and mitigation, supplementary passive safety concept, simplification and application of modularization and so on. For those, Probabilistic Safety Assessment (PSA) and availability study will be performed at the early stage of the design, and the Design Reliability Assurance Program (D-RAP) is applied in the development of the KNGR to ensure that the safety and availability evaluated in the PSA and availability study at the early phase of the design is maintained through the detailed design, construction, procurement and operation of the plants. This paper presents the D-RAP concept that could be applied at the stage of the basic design of the nuclear power plants, based on the models for the reference plants and/or similar plants. 4 refs., 1 fig