10th International Conference on Informatics in Control Automation and Robotics

CERN Document Server

Gusikhin, Oleg; Madani, Kurosh; Sasiadek, Jurek

2015-01-01

The present book includes a set of selected papers from the tenth “International Conference on Informatics in Control Automation and Robotics” (ICINCO 2013), held in Reykjavík, Iceland, from 29 to 31 July 2013. The conference was organized in four simultaneous tracks: “Intelligent Control Systems and Optimization”, “Robotics and Automation”, “Signal Processing, Sensors, Systems Modeling and Control” and “Industrial Engineering, Production and Management”. The book is based on the same structure. ICINCO 2013 received 255 paper submissions from 50 countries, in all continents. After a double blind paper review performed by the Program Committee only 30% were published and presented orally. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2013.

3rd International Asia Conference on Informatics in Control, Automation and Robotics

CERN Document Server

Informatics in Control, Automation and Robotics

2012-01-01

Session 2 includes 110 papers selected from 2011 3rd International Asia Conference on Informatics in Control, Automation and Robotics (CAR 2011), held on December 24-25, 2011, Shenzhen, China.   As we all know, the ever growing technology in robotics and automation will help build a better human society. This session will provide a unique opportunity for the academic and industrial communities to address new challenges, share solutions, and discuss research directions for the future. Robotics research emphasizes intelligence and adaptability to cope with unstructured environments. Automation research emphasizes efficiency, productivity, quality, and reliability, focusing on systems that operate autonomously. The main focus of this session is on the autonomous acquisition of semantic information in intelligent robots and systems, as well as the use of semantic knowledge to guide further acquisition of information.

Design automation, languages, and simulations

CERN Document Server

Chen, Wai-Kai

2003-01-01

As the complexity of electronic systems continues to increase, the micro-electronic industry depends upon automation and simulations to adapt quickly to market changes and new technologies. Compiled from chapters contributed to CRC's best-selling VLSI Handbook, this volume covers a broad range of topics relevant to design automation, languages, and simulations. These include a collaborative framework that coordinates distributed design activities through the Internet, an overview of the Verilog hardware description language and its use in a design environment, hardware/software co-design, syst

IFLA General Conference, 1986. Pre-Conference Seminar on Automated Systems for Access to Multilingual and Multiscript Library materials: Problems and Solutions. Papers.

Science.gov (United States)

International Federation of Library Associations and Institutions, The Hague (Netherlands).

A seminar which considered problems and solutions regarding automated systems for access to multilingual and multiscript library materials was held as a pre-session before the IFLA general conference in 1986. Papers presented include: (1) "Romanized and Transliterated Databases of Asian Language Materials--History, Problems, and…

Design Automation in Synthetic Biology.

Science.gov (United States)

Appleton, Evan; Madsen, Curtis; Roehner, Nicholas; Densmore, Douglas

2017-04-03

Design automation refers to a category of software tools for designing systems that work together in a workflow for designing, building, testing, and analyzing systems with a target behavior. In synthetic biology, these tools are called bio-design automation (BDA) tools. In this review, we discuss the BDA tools areas-specify, design, build, test, and learn-and introduce the existing software tools designed to solve problems in these areas. We then detail the functionality of some of these tools and show how they can be used together to create the desired behavior of two types of modern synthetic genetic regulatory networks. Copyright © 2017 Cold Spring Harbor Laboratory Press; all rights reserved.

Designing Scientific Academic Conferences as a Learning Environment: How to Stimulate Active Learning at Academic Conferences?

DEFF Research Database (Denmark)

Verbeke, Johan

2015-01-01

conference design and an appropriate learning environment are available. The overall conference design, however, is a crucial aspect in the learning of the participants and deserves special attention from conference organizers. Method: I have organized around 15 carefully designed conferences (and attended...... architecture, arts and design) and on the way knowledge sharing and knowledge development was stimulated at these events. These conferences included less traditional conference designs, collective learning and explicit sharing of understanding between participants. Results: Collaboration in small groups...... for discussing and learning makes a huge difference in sharing and developing new knowledge. This paper aims to highlight the importance and raise awareness of different methods of stimulating the construction of knowledge by conference participants. I hope it will inspire future conference organizers and help...

ASTROS: A multidisciplinary automated structural design tool

Science.gov (United States)

Neill, D. J.

1989-01-01

ASTROS (Automated Structural Optimization System) is a finite-element-based multidisciplinary structural optimization procedure developed under Air Force sponsorship to perform automated preliminary structural design. The design task is the determination of the structural sizes that provide an optimal structure while satisfying numerous constraints from many disciplines. In addition to its automated design features, ASTROS provides a general transient and frequency response capability, as well as a special feature to perform a transient analysis of a vehicle subjected to a nuclear blast. The motivation for the development of a single multidisciplinary design tool is that such a tool can provide improved structural designs in less time than is currently needed. The role of such a tool is even more apparent as modern materials come into widespread use. Balancing conflicting requirements for the structure's strength and stiffness while exploiting the benefits of material anisotropy is perhaps an impossible task without assistance from an automated design tool. Finally, the use of a single tool can bring the design task into better focus among design team members, thereby improving their insight into the overall task.

An Intelligent Automation Platform for Rapid Bioprocess Design.

Science.gov (United States)

Wu, Tianyi; Zhou, Yuhong

2014-08-01

Bioprocess development is very labor intensive, requiring many experiments to characterize each unit operation in the process sequence to achieve product safety and process efficiency. Recent advances in microscale biochemical engineering have led to automated experimentation. A process design workflow is implemented sequentially in which (1) a liquid-handling system performs high-throughput wet lab experiments, (2) standalone analysis devices detect the data, and (3) specific software is used for data analysis and experiment design given the user's inputs. We report an intelligent automation platform that integrates these three activities to enhance the efficiency of such a workflow. A multiagent intelligent architecture has been developed incorporating agent communication to perform the tasks automatically. The key contribution of this work is the automation of data analysis and experiment design and also the ability to generate scripts to run the experiments automatically, allowing the elimination of human involvement. A first-generation prototype has been established and demonstrated through lysozyme precipitation process design. All procedures in the case study have been fully automated through an intelligent automation platform. The realization of automated data analysis and experiment design, and automated script programming for experimental procedures has the potential to increase lab productivity. © 2013 Society for Laboratory Automation and Screening.

ENTERPRISE IRELAND: Design for Competitive Advantage Conference

OpenAIRE

Dee, Peter

2003-01-01

A stimulating conference bringing together world leading experts on design to address the importance of brand development strategies to achieve competitive advantage. Peter Dee - Strategic Design and Marketing Consultant, specialised in the creation of brand development strategies for Enterprise Ireland’s Design Unit. Peter was responsible for the design and development of the the brand identity for the Enterprise Ireland Design for Competitive Advantage Conference in Dublin.

An Intelligent Automation Platform for Rapid Bioprocess Design

Science.gov (United States)

Wu, Tianyi

2014-01-01

Bioprocess development is very labor intensive, requiring many experiments to characterize each unit operation in the process sequence to achieve product safety and process efficiency. Recent advances in microscale biochemical engineering have led to automated experimentation. A process design workflow is implemented sequentially in which (1) a liquid-handling system performs high-throughput wet lab experiments, (2) standalone analysis devices detect the data, and (3) specific software is used for data analysis and experiment design given the user’s inputs. We report an intelligent automation platform that integrates these three activities to enhance the efficiency of such a workflow. A multiagent intelligent architecture has been developed incorporating agent communication to perform the tasks automatically. The key contribution of this work is the automation of data analysis and experiment design and also the ability to generate scripts to run the experiments automatically, allowing the elimination of human involvement. A first-generation prototype has been established and demonstrated through lysozyme precipitation process design. All procedures in the case study have been fully automated through an intelligent automation platform. The realization of automated data analysis and experiment design, and automated script programming for experimental procedures has the potential to increase lab productivity. PMID:24088579

Proceedings of the 2. CDEN design conference

International Nuclear Information System (INIS)

Yellowley, I.; Gu, P.

2005-01-01

The Canadian Design Engineering Network (CDEN) promotes best practices in engineering design. This annual conference, which provided a forum to exchange ideas and experiences in engineering design, included 2 roundtable discussions on design and innovation in Canadian engineering schools, and design considerations in the accreditation of engineering programs. The conference also featured a student design competition. The main topics of the conference were design education, design for innovation and design practices. Within the topic of design education, the following themes were addressed: design curriculum; design projects and cases; emerging design education tools and techniques; evaluation metrics and techniques in design education; web-based education resources; and, multi-disciplinary design education. Within the topic of design for innovation, the following themes were addressed: technological innovation and creativity; product design; process design; adaptable design; platform and product architecture design; modular design; life cycle issues, reliability, serviceability and disposal/recycling; sustainable design and development; design for manufacturing, construction, services, and the environment; design for life, health and fitness; design methodologies, tools and techniques; distributed design activities and teams; and, web-based design and collaborative design and tools. Within the topic of design practice, the following themes were addressed: engineering, procurement and construction industry; design in auto manufacturing, aerospace industry and high-tech industry; engineering project management; design for sustainability and environmental practices; professional development in engineering design; and, current and future industrial practice trends. The conference featured 30 presentations, of which 5 have been catalogued separately for inclusion in this database. refs., tabs., figs

Designing and implementing test automation frameworks with QTP

CERN Document Server

Bhargava, Ashish

2013-01-01

A tutorial-based approach, showing basic coding and designing techniques to build test automation frameworks.If you are a beginner, an automation engineer, an aspiring test automation engineer, a manual tester, a test lead or a test architect who wants to learn, create, and maintain test automation frameworks, this book will accelerate your ability to develop and adapt the framework.

Design Automation Algorithm for Soft Robots

Data.gov (United States)

National Aeronautics and Space Administration — The majority of design to manufacturing today is still an ad hoc and empirical process. There is a direct need for a single, automated design and fabrication...

ETRAN 1999: Society for Electronics,Telecommunications, Computers, Automation and Nuclear Engineering. Section for Nuclear Techniques and Technology. Proceedings of the XLIII Conference. Vol IV

International Nuclear Information System (INIS)

Spasojevic, D.; Smiljanic, M.; Bozic, D.; Stankovic, D.

1999-01-01

The XLIII ETRAN Conference of the Society for Electronic, Telecommunications, Computers, Automation and Nuclear Engineering was held on 20-22 Sep, 1999. In the Proceedings of the Conference The Commission of the Nuclear Technique and Technology has 19 papers presented in three sessions.

Advances in Computer, Communication, Control and Automation

CERN Document Server

011 International Conference on Computer, Communication, Control and Automation

2012-01-01

The volume includes a set of selected papers extended and revised from the 2011 International Conference on Computer, Communication, Control and Automation (3CA 2011). 2011 International Conference on Computer, Communication, Control and Automation (3CA 2011) has been held in Zhuhai, China, November 19-20, 2011. This volume  topics covered include signal and Image processing, speech and audio Processing, video processing and analysis, artificial intelligence, computing and intelligent systems, machine learning, sensor and neural networks, knowledge discovery and data mining, fuzzy mathematics and Applications, knowledge-based systems, hybrid systems modeling and design, risk analysis and management, system modeling and simulation. We hope that researchers, graduate students and other interested readers benefit scientifically from the proceedings and also find it stimulating in the process.

Designing a Software Test Automation Framework

Directory of Open Access Journals (Sweden)

Sabina AMARICAI

2014-01-01

Full Text Available Testing is an art and science that should ultimately lead to lower cost businesses through increasing control and reducing risk. Testing specialists should thoroughly understand the system or application from both the technical and the business perspective, and then design, build and implement the minimum-cost, maximum-coverage validation framework. Test Automation is an important ingredient for testing large scale applications. In this paper we discuss several test automation frameworks, their advantages and disadvantages. We also propose a custom automation framework model that is suited for applications with very complex business requirements and numerous interfaces.

Automated design of degenerate codon libraries.

Science.gov (United States)

Mena, Marco A; Daugherty, Patrick S

2005-12-01

Degenerate codon libraries are frequently used in protein engineering and evolution studies but are often limited to targeting a small number of positions to adequately limit the search space. To mitigate this, codon degeneracy can be limited using heuristics or previous knowledge of the targeted positions. To automate design of libraries given a set of amino acid sequences, an algorithm (LibDesign) was developed that generates a set of possible degenerate codon libraries, their resulting size, and their score relative to a user-defined scoring function. A gene library of a specified size can then be constructed that is representative of the given amino acid distribution or that includes specific sequences or combinations thereof. LibDesign provides a new tool for automated design of high-quality protein libraries that more effectively harness existing sequence-structure information derived from multiple sequence alignment or computational protein design data.

Smart Design : First International Conference Proceedings

CERN Document Server

2012-01-01

Good product designs merge materials, technology and hardware into a unified user experience; one where the technology recedes into the background and people benefit from the capabilities and experiences available. By focusing on functional gain, critical awareness and emotive connection, even the most multifaceted and complex technology can be made to feel straightforward and become an integral part of daily life. Researchers, designers and developers must understand how to progress or appropriate the right technical and human knowledge to inform their innovations. The 1st International Smart Design conference provides a timely forum and bring together researchers and practitioners to discuss issues, identify challenges and future directions, and share their R&D findings and experiences in the areas of design, materials and technology. This proceedings of the 1st Smart Design conference held at Nottingham Trent University in November 2011 includes summaries of the talks given on topics ranging from intel...

Conference on Manned Systems Design : New Methods and Equipment

CERN Document Server

Kraiss, K-F

1981-01-01

This volume contains the proceedings of a conference held in Freiburg, West Germany, September 22-25, 1980, entitled "Manned Systems Design, New Methods and Equipment". The conference was sponsored by the Special Programme Panel on Human Factors of the Scientific Affairs Division of NATO, and supported by Panel VIII, AC/243, on "Human and Biomedical Sciences". Their sponsorship and support are gratefully acknowledged. The contributions in the book are grouped according to the main themes of the conference with special emphasis on analytical approaches, measurement of performance, and simulator design and evaluat ion. The design of manned systems covers many and highly diversified areas. Therefore, a conference under the general title of "Manned Systems Design" is rather ambitious in itself. However, scientists and engineers engaged in the design of manned systems very often are confronted with problems that can be solved only by having several disciplines working together. So it was felt that knowledge about ...

Model-Based approaches to Human-Automation Systems Design

DEFF Research Database (Denmark)

Jamieson, Greg A.; Andersson, Jonas; Bisantz, Ann

2012-01-01

Human-automation interaction in complex systems is common, yet design for this interaction is often conducted without explicit consideration of the role of the human operator. Fortunately, there are a number of modeling frameworks proposed for supporting this design activity. However...... (and reportedly one or two critics) can engage one another on several agreed questions about such frameworks. The goal is to aid non-aligned practitioners in choosing between alternative frameworks for their human-automation interaction design challenges....

Controller Design Automation for Aeroservoelastic Design Optimization of Wind Turbines

NARCIS (Netherlands)

Ashuri, T.; Van Bussel, G.J.W.; Zaayer, M.B.; Van Kuik, G.A.M.

2010-01-01

The purpose of this paper is to integrate the controller design of wind turbines with structure and aerodynamic analysis and use the final product in the design optimization process (DOP) of wind turbines. To do that, the controller design is automated and integrated with an aeroelastic simulation

Proceedings of the 18th International Conference on Engineering Design

DEFF Research Database (Denmark)

The 18th International Conference on Engineering Design, ICED11, was held August 15-18th 2011 at The Technical University of Denmark (DTU), Copenhagen. The Conference is the flagship event of the Design Society, a society dedicated to contributing to a broad and established understanding of devel......The 18th International Conference on Engineering Design, ICED11, was held August 15-18th 2011 at The Technical University of Denmark (DTU), Copenhagen. The Conference is the flagship event of the Design Society, a society dedicated to contributing to a broad and established understanding...... of development and design. The ICED series of conferences has a long tradition, which started in 1981 with the first ICED in Rome. A total of 419 papers were presented at ICED11, each double-blind reviewed by multiple reviewers. The papers included research papers and case studies on a variety of topics...... concerned with design thinking, theory, and practice, with a premium placed on evidence-based research. The papers are published in a total of ten volumes of Proceedings, in addition to electronic publication. This volume is the first of two concerned with Design Methods and Tools, and contains 45 papers...

Automated mixed traffic vehicle design AMTV 2

Science.gov (United States)

Johnston, A. R.; Marks, R. A.; Cassell, P. L.

1982-01-01

The design of an improved and enclosed Automated Mixed Traffic Transit (AMTT) vehicle is described. AMTT is an innovative concept for low-speed tram-type transit in which suitable vehicles are equipped with sensors and controls to permit them to operate in an automated mode on existing road or walkway surfaces. The vehicle chassis and body design are presented in terms of sketches and photographs. The functional design of the sensing and control system is presented, and modifications which could be made to the baseline design for improved performance, in particular to incorporate a 20-mph capability, are also discussed. The vehicle system is described at the block-diagram-level of detail. Specifications and parameter values are given where available.

Automated detection of test fixture strategies and smells

NARCIS (Netherlands)

Greiler, M.S.; Van Deursen, A.; Storey, M.A.

2013-01-01

Paper accepted for publication in the Proceedings of the Sixth International Conference on Software Testing, Verification and Validation, IEEE Computer Society, 18-22 March 2013, ISBN 978-1-4673-5961-0, doi: 10.1109/ICST.2013.45 Designing automated tests is a challenging task. One important concern

Advances in Automation and Robotics

CERN Document Server

International conference on Automation and Robotics ICAR2011

2012-01-01

The international conference on Automation and Robotics-ICAR2011 is held during December 12-13, 2011 in Dubai, UAE. The proceedings of ICAR2011 have been published by Springer Lecture Notes in Electrical Engineering, which include 163 excellent papers selected from more than 400 submitted papers.   The conference is intended to bring together the researchers and engineers/technologists working in different aspects of intelligent control systems and optimization, robotics and automation, signal processing, sensors, systems modeling and control, industrial engineering, production and management.   This part of proceedings includes 81 papers contributed by many researchers in relevant topic areas covered at ICAR2011 from various countries such as France, Japan, USA, Korea and China etc.     Many papers introduced their advanced research work recently; some of them gave a new solution to problems in the field, with powerful evidence and detail demonstration. Others stated the application of their designed and...

Automated minimax design of networks

DEFF Research Database (Denmark)

Madsen, Kaj; Schjær-Jacobsen, Hans; Voldby, J

1975-01-01

A new gradient algorithm for the solution of nonlinear minimax problems has been developed. The algorithm is well suited for automated minimax design of networks and it is very simple to use. It compares favorably with recent minimax and leastpth algorithms. General convergence problems related...

Automated electronic filter design

CERN Document Server

Banerjee, Amal

2017-01-01

This book describes a novel, efficient and powerful scheme for designing and evaluating the performance characteristics of any electronic filter designed with predefined specifications. The author explains techniques that enable readers to eliminate complicated manual, and thus error-prone and time-consuming, steps of traditional design techniques. The presentation includes demonstration of efficient automation, using an ANSI C language program, which accepts any filter design specification (e.g. Chebyschev low-pass filter, cut-off frequency, pass-band ripple etc.) as input and generates as output a SPICE(Simulation Program with Integrated Circuit Emphasis) format netlist. Readers then can use this netlist to run simulations with any version of the popular SPICE simulator, increasing accuracy of the final results, without violating any of the key principles of the traditional design scheme.

AUTOMATION, ITS MEANING FOR EDUCATIONAL ADMINISTRATION.

Science.gov (United States)

National Conference of Professors of Educational Administration.

A REPORT OF THE TENTH ANNUAL MEETING OF THE NATIONAL CONFERENCE OF PROFESSORS OF EDUCATIONAL ADMINISTRATION (NCPEA), WHICH WAS HELD TO DISCUSS AUTOMATION AND ITS IMPLICATIONS FOR THE PREPARATION OF SCHOOL ADMINISTRATORS, IS PRESENTED. THE CONFERENCE WAS UNDERTAKEN BECAUSE THE NCPEA BELIEVED THAT AUTOMATION IS SYMBOLIC OF VAST CHANGES AT WORK IN…

37th International MATADOR Conference

CERN Document Server

Li, Lin

2013-01-01

Presented here are 97 refereed papers given at the 37th MATADOR Conference held at The University of Manchester in July 2012. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research.   The proceedings of this conference contain original papers contributed by researchers from many countries on different continents. The papers cover the principles, techniques and applications in aerospace, automotive, biomedical, energy, consumable goods and process industries.    The papers in this volume reflect: the importance of manufacturing to international wealth creation; the emerging fields of micro- and nano-manufacture; the increasing trend towards the fabrication of parts using lasers; the growing demand for precision engineering and part inspection techniques, and the changing trends in manufacturing within a global environment. .

23rd CIRP design conference

CERN Document Server

Stark, Rainer

2013-01-01

 The collection of papers in this book comprises the proceedings of the 23rd CIRP Design Conference held between March 11th and March 13th 2013 at the Ruhr-Universität Bochum in Germany. The event was organized in cooperation with the German Academic Society for Product Development – WiGeP. The focus of the conference was  on »Smart Product Engineering«, covering two major aspects of modern  product creation: the development of intelligent (“smart”) products as well as the new (“smart”) approach of engineering, explicitly taking into account consistent systems integration. Throughout the 98 papers contained in these proceedings, a range of topics are covered, amongst them the different facets and aspects of what makes a product or an engineering solution “smart”. In addition, the conference papers investigate new ways of engineering for production planning and collaboration towards Smart Product Engineering. The publications provide a solid insight into the pressing issues of modern digita...

Future Computer, Communication, Control and Automation

CERN Document Server

2011 International Conference on Computer, Communication, Control and Automation

2012-01-01

The volume includes a set of selected papers extended and revised from the 2011 International Conference on Computer, Communication, Control and Automation (3CA 2011). 2011 International Conference on Computer, Communication, Control and Automation (3CA 2011) has been held in Zhuhai, China, November 19-20, 2011. This volume topics covered include wireless communications, advances in wireless video, wireless sensors networking, security in wireless networks, network measurement and management, hybrid and discrete-event systems, internet analytics and automation, robotic system and applications, reconfigurable automation systems, machine vision in automation. We hope that researchers, graduate students and other interested readers benefit scientifically from the proceedings and also find it stimulating in the process.

DESIGN OF SMALL AUTOMATION WORK CELL SYSTEM DEMONSTRATIONS

International Nuclear Information System (INIS)

TURNER, C.; PEHL, J.

2000-01-01

The introduction of automation systems into many of the facilities dealing with the production, use and disposition of nuclear materials has been an ongoing objective. Many previous attempts have been made, using a variety of monolithic and, in some cases, modular technologies. Many of these attempts were less than successful, owing to the difficulty of the problem, the lack of maturity of the technology, and over optimism about the capabilities of a particular system. Consequently, it is not surprising that suggestions that automation can reduce worker Occupational Radiation Exposure (ORE) levels are often met with skepticism and caution. The development of effective demonstrations of these technologies is of vital importance if automation is to become an acceptable option for nuclear material processing environments. The University of Texas Robotics Research Group (UTRRG) has been pursuing the development of technologies to support modular small automation systems (each of less than 5 degrees-of-freedom) and the design of those systems for more than two decades. Properly designed and implemented, these technologies have a potential to reduce the worker ORE associated with work in nuclear materials processing facilities. Successful development of systems for these applications requires the development of technologies that meet the requirements of the applications. These application requirements form a general set of rules that applicable technologies and approaches need to adhere to, but in and of themselves are generally insufficient for the design of a specific automation system. For the design of an appropriate system, the associated task specifications and relationships need to be defined. These task specifications also provide a means by which appropriate technology demonstrations can be defined. Based on the requirements and specifications of the operations of the Advanced Recovery and Integrated Extraction System (ARIES) pilot line at Los Alamos National

Toward designing for trust in database automation

Energy Technology Data Exchange (ETDEWEB)

Duez, P. P.; Jamieson, G. A. [Cognitive Engineering Laboratory, Univ. of Toronto, 5 King' s College Rd., Toronto, Ont. M5S 3G8 (Canada)

2006-07-01

Appropriate reliance on system automation is imperative for safe and productive work, especially in safety-critical systems. It is unsafe to rely on automation beyond its designed use; conversely, it can be both unproductive and unsafe to manually perform tasks that are better relegated to automated tools. Operator trust in automated tools mediates reliance, and trust appears to affect how operators use technology. As automated agents become more complex, the question of trust in automation is increasingly important. In order to achieve proper use of automation, we must engender an appropriate degree of trust that is sensitive to changes in operating functions and context. In this paper, we present research concerning trust in automation in the domain of automated tools for relational databases. Lee and See have provided models of trust in automation. One model developed by Lee and See identifies three key categories of information about the automation that lie along a continuum of attributional abstraction. Purpose-, process-and performance-related information serve, both individually and through inferences between them, to describe automation in such a way as to engender r properly-calibrated trust. Thus, one can look at information from different levels of attributional abstraction as a general requirements analysis for information key to appropriate trust in automation. The model of information necessary to engender appropriate trust in automation [1] is a general one. Although it describes categories of information, it does not provide insight on how to determine the specific information elements required for a given automated tool. We have applied the Abstraction Hierarchy (AH) to this problem in the domain of relational databases. The AH serves as a formal description of the automation at several levels of abstraction, ranging from a very abstract purpose-oriented description to a more concrete description of the resources involved in the automated process

Toward designing for trust in database automation

International Nuclear Information System (INIS)

Duez, P. P.; Jamieson, G. A.

2006-01-01

Appropriate reliance on system automation is imperative for safe and productive work, especially in safety-critical systems. It is unsafe to rely on automation beyond its designed use; conversely, it can be both unproductive and unsafe to manually perform tasks that are better relegated to automated tools. Operator trust in automated tools mediates reliance, and trust appears to affect how operators use technology. As automated agents become more complex, the question of trust in automation is increasingly important. In order to achieve proper use of automation, we must engender an appropriate degree of trust that is sensitive to changes in operating functions and context. In this paper, we present research concerning trust in automation in the domain of automated tools for relational databases. Lee and See have provided models of trust in automation. One model developed by Lee and See identifies three key categories of information about the automation that lie along a continuum of attributional abstraction. Purpose-, process-and performance-related information serve, both individually and through inferences between them, to describe automation in such a way as to engender r properly-calibrated trust. Thus, one can look at information from different levels of attributional abstraction as a general requirements analysis for information key to appropriate trust in automation. The model of information necessary to engender appropriate trust in automation [1] is a general one. Although it describes categories of information, it does not provide insight on how to determine the specific information elements required for a given automated tool. We have applied the Abstraction Hierarchy (AH) to this problem in the domain of relational databases. The AH serves as a formal description of the automation at several levels of abstraction, ranging from a very abstract purpose-oriented description to a more concrete description of the resources involved in the automated process

Automated reasoning applications to design analysis

International Nuclear Information System (INIS)

Stratton, R.C.

1984-01-01

Given the necessary relationships and definitions of design functions and components, validation of system incarnation (the physical product of design) and sneak function analysis can be achieved via automated reasoners. The relationships and definitions must define the design specification and incarnation functionally. For the design specification, the hierarchical functional representation is based on physics and engineering principles and bounded by design objectives and constraints. The relationships and definitions of the design incarnation are manifested as element functional definitions, state relationship to functions, functional relationship to direction, element connectivity, and functional hierarchical configuration

Thermal battery automated assembly station conceptual design

Energy Technology Data Exchange (ETDEWEB)

Jacobs, D

1988-08-01

Thermal battery assembly involves many operations which are labor- intense. In August 1986, a project team was formed at GE Neutron Devices to investigate and evaluate more efficient and productive battery assembly techniques through the use of automation. The result of this study was the acceptance of a plan to automate the piece part pellet fabrication and battery stacking operations by using computerized pellet presses and robots which would be integrated by a main computer. This report details the conceptual design and development plan to be followed in the fabrication, development, and implementation of a thermal battery automated assembly station. 4 figs., 8 tabs.

EcoDesign 2.0 - Quantitative EcoDesign within Drives and Automation Technologies

DEFF Research Database (Denmark)

Auer, Johannes

with single products, eco-design of industrial automation and drive technologies has to address the key issue of the solution’s usage stage in terms of system design corresponding to the application context, where several products work in conjunction with each other. Further, in response to the above...... engineering approaches. Research focus lies in areas where these fields overlap and complement each other in the development process of given applications, in particular the development and implementation of Drives and Automation Technologies. The evaluation of the research background, based on research...... and currently implemented state-of-the-art of ecodesign of drives and automation technologies in discreet and process industries was evaluated, putting it in context to the processes and portfolio of the Siemens AG, Process Industries & Drives Division (PD), as well as current sustainability challenges...

ETRAN 2002: Society for Electronics,Telecommunications, Computers, Automation and Nuclear Engineering. Section for Nuclear Techniques and Technology. Proceedings of the XLVI Conference. Vol IV

International Nuclear Information System (INIS)

Milosevic, M.; Jaksic, Z.; Bozic, D.; Potkonjak, V.

2002-01-01

The XLVI ETRAN Conference of the Society for Electronic, Telecommunications, Computers, Automation and Nuclear Engineering was held on 4-7 June, 2002. In the Proceedings of the Conference The Commission of the Nuclear Technique and Technology has 14 papers presented in three following sessions: 1. Actual problems in nuclear technologies; 2. Accelerator and reactor systems; and 3. Radiation protection and ionizing radiation uses

Proceedings of the 25th intersociety energy conversion engineering conference

International Nuclear Information System (INIS)

Nelson, P.A.; Schertz, W.W.; Till, R.H.

1990-01-01

This book contains the proceedings of the 25th intersociety energy conversion engineering conference. Volume 1 is organized under the following headings: space power systems requirements and issues, space power systems; space power systems 2; space nuclear power reactors space nuclear reactor technology I; space nuclear reactor technology II; reactor technology; isotopic fueled power systems I, isotopic fueled power systems II, space power automation; space power automation II, space power automation III; space power automation IV; space power automation V; power systems hardware and design selection, power components, pulse power, power management and distribution, power management and distribution II, power management and distribution III; space energy conversion: solar dynamic, space energy conversion: static and dynamic, space solar array technology, advanced space solar cells

Automating InDesign with Regular Expressions

CERN Document Server

Kahrel, Peter

2006-01-01

If you need to make automated changes to InDesign documents beyond what basic search and replace can handle, you need regular expressions, and a bit of scripting to make them work. This Short Cut explains both how to write regular expressions, so you can find and replace the right things, and how to use them in InDesign specifically.

A Toolset for Supporting Iterative Human Automation: Interaction in Design

Science.gov (United States)

Feary, Michael S.

2010-01-01

The addition of automation has greatly extended humans' capability to accomplish tasks, including those that are difficult, complex and safety critical. The majority of Human - Automation Interacton (HAl) results in more efficient and safe operations, ho,,:,ever ertain unpected atomatlon behaviors or "automation surprises" can be frustrating and, In certain safety critical operations (e.g. transporttion, manufacturing control, medicine), may result in injuries or. the loss of life.. (Mellor, 1994; Leveson, 1995; FAA, 1995; BASI, 1998; Sheridan, 2002). This papr describes he development of a design tool that enables on the rapid development and evaluation. of automaton prototypes. The ultimate goal of the work is to provide a design platform upon which automation surprise vulnerability analyses can be integrated.

AUTOMATION DESIGN FOR MONORAIL - BASED SYSTEM PROCESSES

Directory of Open Access Journals (Sweden)

Bunda BESA

2016-12-01

Full Text Available Currently, conventional methods of decline development put enormous cost pressure on the profitability of mining operations. This is the case with narrow vein ore bodies where current methods and mine design of decline development may be too expensive to support economic extraction of the ore. According to studies, the time it takes to drill, clean and blast an end in conventional decline development can be up to 224 minutes. This is because once an end is blasted, cleaning should first be completed before drilling can commence, resulting in low advance rates per shift. Improvements in advance rates during decline development can be achieved by application of the Electric Monorail Transport System (EMTS based drilling system. The system consists of the drilling and loading components that use monorail technology to drill and clean the face during decline development. The two systems work simultaneously at the face in such a way that as the top part of the face is being drilled the pneumatic loading system cleans the face. However, to improve the efficiency of the two systems, critical processes performed by the two systems during mining operations must be automated. Automation increases safety and productivity, reduces operator fatigue and also reduces the labour costs of the system. The aim of this paper is, therefore, to describe automation designs of the two processes performed by the monorail drilling and loading systems during operations. During automation design, critical processes performed by the two systems and control requirements necessary to allow the two systems execute such processes automatically have also been identified.

Design and Implementation of Company Tailored Automated Material Handling

DEFF Research Database (Denmark)

Langer, Gilad; Bilberg, Arne

1996-01-01

This article focuses on the problems of analysing automation of material handling systems in order to develop an efficient automated solution that is specifically tailored to the company. The research has resulted in development of new methods for evaluating factory automation from design...... to implementation. The goals of the research were to analyse and evaluate automation in order to obtain an advantageous combination of human and automated resources. The idea is to asses different solutions in a virtual environment, where experiments and analyses can be performed so that the company can justify...... for their application with computer aided information processing tools. The framework is named the "Automated Material Handling (AMH) Preference GuideLine". The research has been carried out in close co-operation with Danish and European industry, where implementations of automation can be referred to. It is our...

Preface to the special section on human factors and automation in vehicles: designing highly automated vehicles with the driver in mind.

Science.gov (United States)

Merat, Natasha; Lee, John D

2012-10-01

This special section brings together diverse research regarding driver interaction with advanced automotive technology to guide design of increasingly automated vehicles. Rapidly evolving vehicle automation will likely change cars and trucks more in the next 5 years than the preceding 50, radically redefining what it means to drive. This special section includes 10 articles from European and North American researchers reporting simulator and naturalistic driving studies. Little research has considered the consequences of fully automated driving, with most focusing on lane-keeping and speed control systems individually. The studies reveal two underlying design philosophies: automate driving versus support driving. Results of several studies, consistent with previous research in other domains, suggest that the automate philosophy can delay driver responses to incidents in which the driver has to intervene and take control from the automation. Understanding how to orchestrate the transfer or sharing of control between the system and the driver, particularly in critical incidents, emerges as a central challenge. Designers should not assume that automation can substitute seamlessly for a human driver, nor can they assume that the driver can safely accommodate the limitations of automation. Designers, policy makers, and researchers must give careful consideration to what role the person should have in highly automated vehicles and how to support the driver if the driver is to be responsible for vehicle control. As in other domains, driving safety increasingly depends on the combined performance of the human and automation, and successful designs will depend on recognizing and supporting the new roles of the driver.

Automating expert role to determine design concept in Kansei Engineering

Science.gov (United States)

Lokman, Anitawati Mohd; Haron, Mohammad Bakri Che; Abidin, Siti Zaleha Zainal; Khalid, Noor Elaiza Abd

2016-02-01

Affect has become imperative in product quality. In affective design field, Kansei Engineering (KE) has been recognized as a technology that enables discovery of consumer's emotion and formulation of guide to design products that win consumers in the competitive market. Albeit powerful technology, there is no rule of thumb in its analysis and interpretation process. KE expertise is required to determine sets of related Kansei and the significant concept of emotion. Many research endeavors become handicapped with the limited number of available and accessible KE experts. This work is performed to simulate the role of experts with the use of Natphoric algorithm thus providing sound solution to the complexity and flexibility in KE. The algorithm is designed to learn the process by implementing training datasets taken from previous KE research works. A framework for automated KE is then designed to realize the development of automated KE system. A comparative analysis is performed to determine feasibility of the developed prototype to automate the process. The result shows that the significant Kansei is determined by manual KE implementation and the automated process is highly similar. KE research advocates will benefit this system to automatically determine significant design concepts.

Automating Relational Database Design for Microcomputer Users.

Science.gov (United States)

Pu, Hao-Che

1991-01-01

Discusses issues involved in automating the relational database design process for microcomputer users and presents a prototype of a microcomputer-based system (RA, Relation Assistant) that is based on expert systems technology and helps avoid database maintenance problems. Relational database design is explained and the importance of easy input…

DRS // CUMULUS Oslo 2013. The 2nd International Conference for Design Education Researchers

Directory of Open Access Journals (Sweden)

Liv Merete Nielsen

2012-08-01

Full Text Available This international conference is a springboard for sharing ideas and concepts about contemporary design education research. Contributors are invited to submit research that deals with different facets of contemporary approaches to design education research. All papers will be double-blind peer-reviewed. This conference is open to research in any aspect and discipline of design education. Conference theme:Design Learning for Tomorrow - Design Education from Kindergarten to PhD

4th International Conference on Sustainable Design and Manufacturing

CERN Document Server

Howlett, Robert; Setchi, Rossi; Cimatti, Barbara

2017-01-01

This volume includes papers presented at the 4th International Conference on Sustainable Design and Manufacturing (SDM-17) held in Bologna, Italy, in April 2017. The conference covered a wide range of topics from cutting-edge sustainable product design and service innovation, sustainable processes and technology for the manufacturing of sustainable products, sustainable manufacturing systems and enterprises, decision support for sustainability, and the study of the societal impact of sustainability including research for circular economy. Application areas are wide and varied, and the book provides an excellent overview of the latest research and development in the area of Sustainable Design and Manufacturing.

Subject matter of the All-Union Coordination Conference. [USSR

Energy Technology Data Exchange (ETDEWEB)

Rudkevich, M.I.; Tselik, M.P.; Belkina, T.V.

1984-06-01

Conference on reviewing plans for new research and experimental design projects in the coking industry for 1984-85 took place on 13-17 June 1983. Participants represented the Ministry of Ferrous Metallurgy, Institute for the Chemistry of Coal and other research institutes, technical schools and coking plants. The titles of the more important papers delivered at the conference are given. Main directions in research and development, test results of new processes and technology, automation and mechanization in the industry, preparation of coal batches for coking, studies on coals from the eastern deposits, methods for evaluating blast furnace cokes, and other subject areas related to the coking and chemical industry were covered in the papers delivered at the conference. Altogether 179 on-going and new projects were discussed at the conference.

TARDIS: An Automation Framework for JPL Mission Design and Navigation

Science.gov (United States)

Roundhill, Ian M.; Kelly, Richard M.

2014-01-01

Mission Design and Navigation at the Jet Propulsion Laboratory has implemented an automation framework tool to assist in orbit determination and maneuver design analysis. This paper describes the lessons learned from previous automation tools and how they have been implemented in this tool. In addition this tool has revealed challenges in software implementation, testing, and user education. This paper describes some of these challenges and invites others to share their experiences.

Automation of the aircraft design process

Science.gov (United States)

Heldenfels, R. R.

1974-01-01

The increasing use of the computer to automate the aerospace product development and engineering process is examined with emphasis on structural analysis and design. Examples of systems of computer programs in aerospace and other industries are reviewed and related to the characteristics of aircraft design in its conceptual, preliminary, and detailed phases. Problems with current procedures are identified, and potential improvements from optimum utilization of integrated disciplinary computer programs by a man/computer team are indicated.

International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing

CERN Document Server

Nigrelli, Vincenzo; Oliveri, Salvatore; Peris-Fajarnes, Guillermo; Rizzuti, Sergio

2017-01-01

This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of t...

System of automated map design

International Nuclear Information System (INIS)

Ponomarjov, S.Yu.; Rybalko, S.I.; Proskura, N.I.

1992-01-01

Preprint 'System of automated map design' contains information about the program shell for construction of territory map, performing level line drawing of arbitrary two-dimension field (in particular, the radionuclide concentration field). The work schedule and data structures are supplied, as well as data on system performance. The preprint can become useful for experts in radioecology and for all persons involved in territory pollution mapping or multi-purpose geochemical mapping. (author)

Design of automation tools for management of descent traffic

Science.gov (United States)

Erzberger, Heinz; Nedell, William

1988-01-01

The design of an automated air traffic control system based on a hierarchy of advisory tools for controllers is described. Compatibility of the tools with the human controller, a key objective of the design, is achieved by a judicious selection of tasks to be automated and careful attention to the design of the controller system interface. The design comprises three interconnected subsystems referred to as the Traffic Management Advisor, the Descent Advisor, and the Final Approach Spacing Tool. Each of these subsystems provides a collection of tools for specific controller positions and tasks. This paper focuses primarily on the Descent Advisor which provides automation tools for managing descent traffic. The algorithms, automation modes, and graphical interfaces incorporated in the design are described. Information generated by the Descent Advisor tools is integrated into a plan view traffic display consisting of a high-resolution color monitor. Estimated arrival times of aircraft are presented graphically on a time line, which is also used interactively in combination with a mouse input device to select and schedule arrival times. Other graphical markers indicate the location of the fuel-optimum top-of-descent point and the predicted separation distances of aircraft at a designated time-control point. Computer generated advisories provide speed and descent clearances which the controller can issue to aircraft to help them arrive at the feeder gate at the scheduled times or with specified separation distances. Two types of horizontal guidance modes, selectable by the controller, provide markers for managing the horizontal flightpaths of aircraft under various conditions. The entire system consisting of descent advisor algorithm, a library of aircraft performance models, national airspace system data bases, and interactive display software has been implemented on a workstation made by Sun Microsystems, Inc. It is planned to use this configuration in operational

Architecture and Design for Virtual Conferences: A Case Study

Directory of Open Access Journals (Sweden)

Andrew Sempere

2011-07-01

Full Text Available This paper presents a case study of the design issues facing a large multi-format virtual conference. The conference took place twice in two different years, each time using an avatar-based 3D world with spatialized audio including keynote, poster and social sessions. Between year 1 and 2, major adjustments were made to the architecture and design of the space, leading to improvement in the nature of interaction between the participants. While virtual meetings will likely never supplant the effectiveness of face-to-face meetings, this paper seeks to outline a few design principles learned from this experience, which can be applied generally to make computer mediated collaboration more effective.

Review of Automated Design and Optimization of MEMS

DEFF Research Database (Denmark)

Achiche, Sofiane; Fan, Zhun; Bolognini, Francesca

2007-01-01

carried out. This paper presents a review of these techniques. The design task of MEMS is usually divided into four main stages: System Level, Device Level, Physical Level and the Process Level. The state of the art o automated MEMS design in each of these levels is investigated....

Automated platform for designing multiple robot work cells

Science.gov (United States)

Osman, N. S.; Rahman, M. A. A.; Rahman, A. A. Abdul; Kamsani, S. H.; Bali Mohamad, B. M.; Mohamad, E.; Zaini, Z. A.; Rahman, M. F. Ab; Mohamad Hatta, M. N. H.

2017-06-01

Designing the multiple robot work cells is very knowledge-intensive, intricate, and time-consuming process. This paper elaborates the development process of a computer-aided design program for generating the multiple robot work cells which offer a user-friendly interface. The primary purpose of this work is to provide a fast and easy platform for less cost and human involvement with minimum trial and errors adjustments. The automated platform is constructed based on the variant-shaped configuration concept with its mathematical model. A robot work cell layout, system components, and construction procedure of the automated platform are discussed in this paper where integration of these items will be able to automatically provide the optimum robot work cell design according to the information set by the user. This system is implemented on top of CATIA V5 software and utilises its Part Design, Assembly Design, and Macro tool. The current outcomes of this work provide a basis for future investigation in developing a flexible configuration system for the multiple robot work cells.

Eighth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, part 2

Energy Technology Data Exchange (ETDEWEB)

Starnes, J.H. Jr.; Bohon, H.L.; Garzon, S.B.

1990-09-01

Papers presented at the conference are compiled. The conference provided a forum for the scientific community to exchange composite structures design information and an opportunity to observe recent progress in composite structures design and technology. Part 2 contains papers related to the following subject areas: the application in design; methodology in design; and reliability in design.

Eighth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, Part 2

Science.gov (United States)

Starnes, James H., Jr. (Compiler); Bohon, Herman L. (Compiler); Garzon, Sherry B. (Compiler)

1990-01-01

Papers presented at the conference are compiled. The conference provided a forum for the scientific community to exchange composite structures design information and an opportunity to observe recent progress in composite structures design and technology. Part 2 contains papers related to the following subject areas: the application in design; methodology in design; and reliability in design.

Advances in Electrical Engineering and Automation

CERN Document Server

Huang, Xiong

2012-01-01

EEA2011 is an integrated conference concentration its focus on Electrical Engineering and Automation. In the proceeding, you can learn much more knowledge about  Electrical Engineering and Automation of researchers from all around the world. The main role of the proceeding is to be used as an exchange pillar for researchers who are working in the mentioned fields. In order to meet the high quality of Springer, AISC series, the organization committee has made their efforts to do the following things. Firstly, poor quality paper has been refused after reviewing course by anonymous referee experts. Secondly, periodically review meetings have been held around the reviewers about five times for exchanging reviewing suggestions. Finally, the conference organizers had several preliminary sessions before the conference. Through efforts of different people and departments, the conference will be successful and fruitful.  

Optimizing human-system interface automation design based on a skill-rule-knowledge framework

International Nuclear Information System (INIS)

Lin, Chiuhsiang Joe; Yenn, T.-C.; Yang, C.-W.

2010-01-01

This study considers the technological change that has occurred in complex systems within the past 30 years. The role of human operators in controlling and interacting with complex systems following the technological change was also investigated. Modernization of instrumentation and control systems and components leads to a new issue of human-automation interaction, in which human operational performance must be considered in automated systems. The human-automation interaction can differ in its types and levels. A system design issue is usually realized: given these technical capabilities, which system functions should be automated and to what extent? A good automation design can be achieved by making an appropriate human-automation function allocation. To our knowledge, only a few studies have been published on how to achieve appropriate automation design with a systematic procedure. Further, there is a surprising lack of information on examining and validating the influences of levels of automation (LOAs) on instrumentation and control systems in the advanced control room (ACR). The study we present in this paper proposed a systematic framework to help in making an appropriate decision towards types of automation (TOA) and LOAs based on a 'Skill-Rule-Knowledge' (SRK) model. From the evaluating results, it was shown that the use of either automatic mode or semiautomatic mode is insufficient to prevent human errors. For preventing the occurrences of human errors and ensuring the safety in ACR, the proposed framework can be valuable for making decisions in human-automation allocation.

NATO Conference on Manpower Planning and Organization Design

CERN Document Server

Niehaus, Richard

1978-01-01

This volume is the proceedings of the conference entitled "Manpower Planning and Organization Design" which was held in Stresa, Italy, 20-24 June 1977. The Conference was sponsored by the NATO Scientific Affairs Division and organized jointly through the Special Programs Panels on Human Factors and on Systems Science. Two Conference Directors were appointed with overall responsibilities for the programme and for policy, and they were assisted in their tasks by a small advisory panel consisting of Professor A. Charnes (University of Texas), Professor W.W. Cooper (Carnegie Mellon University, now at Harvard University) and Dr. F.A. Heller (TavistQck Institute of Human Relations). Professor R. Florio of Bergamo kindly agreed to become Administrative Director and, as such, was responsible for all the local arrangements. The Conference Directors were further assisted by "national points of contact" appointed from each of the member countries of NATO. These national representatives played a substantial part in the s...

Conceptual designs of automated systems for underground emplacement and retrieval of nuclear waste

International Nuclear Information System (INIS)

Slocum, A.H.; Hou, W.M.; Park, K.; Hochmuth, C.; Thurston, D.C.

1987-01-01

Current designs of underground nuclear waste repositories have not adequately addressed the possibility of automated, unmanned emplacement and retrieval. This report will present design methodologies for development of an automated system for underground emplacement of nuclear waste. By scaling generic issues to different repositories, it is shown that a two vehicle automated waste emplacement/retrieval system can be designed to operate in a fail-safe mode. Evaluation of cost at this time is not possible. Significant gains in worker safety, however, can be realized by minimizing the possibility of human exposure

MDEP Conference on New Reactor Design Activities - Multinational Design Evaluation Programme (MDEP) Conference Proceedings, Paris, France, 10-11 September 2009

International Nuclear Information System (INIS)

2010-01-01

The MDEP is a unique ten-nation initiative being undertaken by national regulatory authorities from Canada, China, Finland, France, Japan, Republic of Korea, the Russian Federation, South Africa, the United Kingdom, and the United States with the purposes of co-operating on safety design reviews of new reactors and identifying opportunities to harmonise and converge on safety licensing review practices and requirements. The OECD Nuclear Energy Agency has been chosen to provide the technical secretariat support. The International Atomic Energy Agency participates in many of the MDEP activities. Started in 2007 with co-operation on various pilot project issues, the MDEP's expected outcomes are: (1) improved effectiveness and efficiency of regulatory safety design reviews, (2) increased quality of safety assessments, and (3) and identified areas for the convergence of regulatory requirements and practices. Making each regulator stronger in its ability to make sovereign safety decisions is a key objective that cuts across all MDEP activities. In 2008, the top regulators from each national authority met as the MDEP Policy Group and adopted the present structure and programme of work for the MDEP, including the pursuit of co-operation on specific safety design reviews and pursuing closer co-ordination on harmonisation and convergence issues such as digital instrumentation and control, mechanical codes and standards, and vendor inspections. The MDEP is currently a long-term programme that focuses in near term and interim results to share within MDEP and with other stakeholders. With effective communications in mind, the MDEP Policy Group directed the NEA to co-ordinate the Conference on New Reactor Design Activities with the purpose of communicating to a wide spectrum of stakeholders worldwide as to the program of work and accomplishments of the MDEP, and soliciting feedback and input from these stakeholders regarding recommendations on how to co-operate more efficiently

A Review Of Design And Control Of Automated Guided Vehicle Systems

OpenAIRE

Le-Anh, Tuan; Koster, René

2004-01-01

textabstractThis paper presents a review on design and control of automated guided vehicle systems. We address most key related issues including guide-path design, estimating the number of vehicles, vehicle scheduling, idle-vehicle positioning, battery management, vehicle routing, and conflict resolution. We discuss and classify important models and results from key publications in literature on automated guided vehicle systems, including often-neglected areas, such as idle-vehicle positionin...

International Conference on Mechanical Engineering and Technology

CERN Document Server

Mechanical Engineering and Technology

2012-01-01

The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011.   Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings.   This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation...

Automated Design Tools for Integrated Mixed-Signal Microsystems (NeoCAD)

National Research Council Canada - National Science Library

Petre, P; Visher, J; Shringarpure, R; Valley, F; Swaminathan, M

2005-01-01

Automated design tools and integrated design flow methodologies were developed that demonstrated more than an order- of-magnitude reduction in cycle time and cost for mixed signal (digital/analoglRF...

Adaptive Automation Design and Implementation

Science.gov (United States)

2015-09-17

with an automated system to a real-world adaptive au- tomation system implementation. There have been plenty of adaptive automation 17 Adaptive...of systems without increasing manpower requirements by allocating routine tasks to automated aids, improving safety through the use of au- tomated ...between intermediate levels of au- tomation , explicitly defining which human task a given level automates. Each model aids the creation and classification

Development of design principles for automated systems in transport control.

Science.gov (United States)

Balfe, Nora; Wilson, John R; Sharples, Sarah; Clarke, Theresa

2012-01-01

This article reports the results of a qualitative study investigating attitudes towards and opinions of an advanced automation system currently used in UK rail signalling. In-depth interviews were held with 10 users, key issues associated with automation were identified and the automation's impact on the signalling task investigated. The interview data highlighted the importance of the signallers' understanding of the automation and their (in)ability to predict its outputs. The interviews also covered the methods used by signallers to interact with and control the automation, and the perceived effects on their workload. The results indicate that despite a generally low level of understanding and ability to predict the actions of the automation system, signallers have developed largely successful coping mechanisms that enable them to use the technology effectively. These findings, along with parallel work identifying desirable attributes of automation from the literature in the area, were used to develop 12 principles of automation which can be used to help design new systems which better facilitate cooperative working. The work reported in this article was completed with the active involvement of operational rail staff who regularly use automated systems in rail signalling. The outcomes are currently being used to inform decisions on the extent and type of automation and user interfaces in future generations of rail control systems.

Automated particulate sampler field test model operations guide

Energy Technology Data Exchange (ETDEWEB)

Bowyer, S.M.; Miley, H.S.

1996-10-01

The Automated Particulate Sampler Field Test Model Operations Guide is a collection of documents which provides a complete picture of the Automated Particulate Sampler (APS) and the Field Test in which it was evaluated. The Pacific Northwest National Laboratory (PNNL) Automated Particulate Sampler was developed for the purpose of radionuclide particulate monitoring for use under the Comprehensive Test Ban Treaty (CTBT). Its design was directed by anticipated requirements of small size, low power consumption, low noise level, fully automatic operation, and most predominantly the sensitivity requirements of the Conference on Disarmament Working Paper 224 (CDWP224). This guide is intended to serve as both a reference document for the APS and to provide detailed instructions on how to operate the sampler. This document provides a complete description of the APS Field Test Model and all the activity related to its evaluation and progression.

Simple heuristics: A bridge between manual core design and automated optimization methods

International Nuclear Information System (INIS)

White, J.R.; Delmolino, P.M.

1993-01-01

The primary function of RESCUE is to serve as an aid in the analysis and identification of feasible loading patterns for LWR reload cores. The unique feature of RESCUE is that its physics model is based on some recent advances in generalized perturbation theory (GPT) methods. The high order GPT techniques offer the accuracy, computational efficiency, and flexibility needed for the implementation of a full range of capabilities within a set of compatible interactive (manual and semi-automated) and automated design tools. The basic design philosophy and current features within RESCUE are reviewed, and the new semi-automated capability is highlighted. The online advisor facility appears quite promising and it provides a natural bridge between the traditional trial-and-error manual process and the recent progress towards fully automated optimization sequences. (orig.)

Design and implementation of tutorials for PLC B&R Automation

OpenAIRE

Sýkora, Daniel

2014-01-01

Tato bakalářská práce se zabývá návrhem a realizací úloh pro PLC B&R a podrobným návodem práce v Automation Studio. Obsahuje také informace o firmě B&R Automation Ges. m. b. H. a jejích produktech. Návrh úloh probíhal ve vývojovém prostředí B&R Automation Studio. Praktická úloha na regulaci teploty byla řešena a odzkoušena na B&R PLC X20. This bachelor’s thesis deals with the design and the implementation tutorials for PLC B&R as well as the detailed instructions of work in the Automation ...

Design automation of switching mode high voltage power supply for nuclear instruments

International Nuclear Information System (INIS)

El-araby, S.M.S.

1999-01-01

This paper presents an automation procedure for the design of switching mode high voltage power supplies, using Pc programming facility. The procedure permits the selection of a ready made or designed ferrite transformer. This selection could be achieved according to the designer desire; as the program includes complete information about ready made ferrite transformer through complete database. The procedure is based on suggested template circuit. Micro-Cap IV simulation package is used to verify the desired high voltage power supply design. Simulation results agree quite well with suggested procedure's results. Design aspects and development needed to increase automation capabilities are also discussed

PROJECT ENGINEERING DATA MANAGEMENT AT AUTOMATED PREPARATION OF DESIGN DOCUMENTATION

Directory of Open Access Journals (Sweden)

A. V. Guryanov

2017-01-01

Full Text Available We have developed and realized instrumental means for automated support of end-to-end design process for design documentation on a product at the programming level. The proposed decision is based on processing of the engineering project data that are contained in interdependent design documents: tactical technical characteristics of products, data on the valuable metals contained in them, the list of components applied in a product and others. Processing of engineering data is based on their conversion to the form provided by requirements of industry standards for design documentation preparation. The general graph of the design documentation developed on a product is provided. The description of the developed software product is given. Automated preparation process of interdependent design documents is shown on the example of preparation of purchased products list. Results of work can be used in case of research and development activities on creation of perspective samples of ADP equipment.

Home Automation : Smart home technology and template house design

OpenAIRE

Zheng, Zeya

2013-01-01

In this thesis, home automation’s general knowledge, technology information and each component will be introduced to the reader in the first half of the whole thesis. In the second half, thesis includes the Home Automation template design and market competitiveness analysis. The author assumes that the reader is going to spend lots of money to have a smart home. In this situation, the author introduces the home automation to the reader at each component. So the reader in this thesis actu...

Software maintenance and evolution and automated software engineering

NARCIS (Netherlands)

Carver, Jeffrey C.; Serebrenik, Alexander

2018-01-01

This issue's column reports on the 33rd International Conference on Software Maintenance and Evolution and 32nd International Conference on Automated Software Engineering. Topics include flaky tests, technical debt, QA bots, and regular expressions.

An automated approach to the design of decision tree classifiers

Science.gov (United States)

Argentiero, P.; Chin, R.; Beaudet, P.

1982-01-01

An automated technique is presented for designing effective decision tree classifiers predicated only on a priori class statistics. The procedure relies on linear feature extractions and Bayes table look-up decision rules. Associated error matrices are computed and utilized to provide an optimal design of the decision tree at each so-called 'node'. A by-product of this procedure is a simple algorithm for computing the global probability of correct classification assuming the statistical independence of the decision rules. Attention is given to a more precise definition of decision tree classification, the mathematical details on the technique for automated decision tree design, and an example of a simple application of the procedure using class statistics acquired from an actual Landsat scene.

Measuring Technology and Mechatronics Automation in Electrical Engineering

CERN Document Server

2012-01-01

Measuring Technology and Mechatronics Automation in Electrical Engineering includes select presentations on measuring technology and mechatronics automation related to electrical engineering, originally presented during the International Conference on Measuring Technology and Mechanatronics Automation (ICMTMA2012). This Fourth ICMTMA, held at Sanya, China, offered a prestigious, international forum for scientists, engineers, and educators to present the state of the art of measuring technology and mechatronics automation research.

18th European Conference on Mathematics for Industry

CERN Document Server

Capasso, Vincenzo; Nicosia, Giuseppe; Romano, Vittorio

2016-01-01

This book presents a collection of papers emphasizing applications of mathematical models and methods to real-world problems of relevance for industry, life science, environment, finance, and so on. The biannual Conference of ECMI (the European Consortium of Mathematics in Industry) held in 2014 focused on various aspects of industrial and applied mathematics. The five main topics addressed at the conference were mathematical models in life science, material science and semiconductors, mathematical methods in the environment, design automation and industrial applications, and computational finance. Several other topics have been treated, such as, among others, optimization and inverse problems, education, numerical methods for stiff pdes, model reduction, imaging processing, multi physics simulation, mathematical models in textile industry. The conference, which brought together applied mathematicians and experts from industry, provided a unique opportunity to exchange ideas, problems and methodologies...

Instrumentation, controls and automation in the power industry

International Nuclear Information System (INIS)

Anon.

1991-01-01

The year 1991 will be remembered as the year EPRI joined with the ISA Power Division to present an outstanding group to technical papers at the First Annual ISA/EPRI Joint Controls and Automation Conference. All papers met the theme for the conference namely Innovative Instrumentation, Controls, and Automation Techniques for the Power Generation Industry and cover a myriad of application ranging from nuclear to conventional fossil to co-generation plants involving nuclear, conventional BTG, and combined cycle equipment applications

Design and control of automated guided vehicle systems: A case study

NARCIS (Netherlands)

Li, Q.; Adriaansen, A.C.; Udding, J.T.; Pogromski, A.Y.

2011-01-01

In this paper, we study the design and control of automated guided vehicle (AGV) systems, with the focus on the quayside container transport in an automated container terminal. We first set up an event-driven model for an AGV system in the zone control framework. Then a number of layouts of the road

A bibliometric analysis of the DESIGN 2012 conference

DEFF Research Database (Denmark)

Cash, Philip; Skec, Stanko; Storga, Mario

2013-01-01

Bibliometric analyses play an important role in reflecting on a research field and identifying areas of strength and weakness. This paper builds on recent reflective efforts within the community by presenting a bibliometric analysis of the DESIGN 2012 conference. Over 2700 citations were identifi...

GENIUS : An integrated environment for supporting the design of generic automated negotiators

NARCIS (Netherlands)

Lin, R.; Kraus, S.; Baarslag, T.; Tykhonov, D.; Hindriks, K.; Jonker, C.M.

2012-01-01

The design of automated negotiators has been the focus of abundant research in recent years. However, due to difficulties involved in creating generalized agents that can negotiate in several domains and against human counterparts, many automated negotiators are domain specific and their behavior

Automating risk analysis of software design models.

Science.gov (United States)

Frydman, Maxime; Ruiz, Guifré; Heymann, Elisa; César, Eduardo; Miller, Barton P

2014-01-01

The growth of the internet and networked systems has exposed software to an increased amount of security threats. One of the responses from software developers to these threats is the introduction of security activities in the software development lifecycle. This paper describes an approach to reduce the need for costly human expertise to perform risk analysis in software, which is common in secure development methodologies, by automating threat modeling. Reducing the dependency on security experts aims at reducing the cost of secure development by allowing non-security-aware developers to apply secure development with little to no additional cost, making secure development more accessible. To automate threat modeling two data structures are introduced, identification trees and mitigation trees, to identify threats in software designs and advise mitigation techniques, while taking into account specification requirements and cost concerns. These are the components of our model for automated threat modeling, AutSEC. We validated AutSEC by implementing it in a tool based on data flow diagrams, from the Microsoft security development methodology, and applying it to VOMS, a grid middleware component, to evaluate our model's performance.

Technology and automation of atomic power engineering and industry. TAAPEI-2009. Materials of branch scientific and technical conference covers the fiftieth anniversary of the Seversk State Engineering Academy

International Nuclear Information System (INIS)

2009-01-01

Materials of the branch scientific and technical conference Technology and automation of atomic power engineering and industry (18-22 May, 2009, Seversk) are performed. Scientific and practical results of investigations into chemical technological developments, creation of machinery and apparatuses, automation of technological processes, application of present-day information technologies in atomic industry as well as ecological and nuclear weapons proliferation problems are shown. Besides issues of professional education and social-economic problems of the atomic branch are considered [ru

The Automation Control System Design of Walking Beam Heating Furnace

OpenAIRE

Hong-Yu LIU; Jun-Qing LIU; Jun-Jie XI

2014-01-01

Combining the transformation project of certain strip steel rolling production line, the techniques process of walking beam heating furnace was elaborated in this paper. The practical application of LOS-T18-2ZC1 laser detector was elaborated. The network communication model of walking beam heating furnace control system was designed. The realization method of production process automation control was elaborated. The entire automation control system allocation picture and PLC power distributio...

Fuel lattice design in a boiling water reactor using a knowledge-based automation system

International Nuclear Information System (INIS)

Tung, Wu-Hsiung; Lee, Tien-Tso; Kuo, Weng-Sheng; Yaur, Shung-Jung

2015-01-01

Highlights: • An automation system was developed for the fuel lattice radial design of BWRs. • An enrichment group peaking equalizing method is applied to optimize the design. • Several heuristic rules and restrictions are incorporated to facilitate the design. • The CPU time for the system to design a 10x10 lattice was less than 1.2 h. • The beginning-of-life LPF was improved from 1.319 to 1.272 for one of the cases. - Abstract: A knowledge-based fuel lattice design automation system for BWRs is developed and applied to the design of 10 × 10 fuel lattices. The knowledge implemented in this fuel lattice design automation system includes the determination of gadolinium fuel pin location, the determination of fuel pin enrichment and enrichment distribution. The optimization process starts by determining the gadolinium distribution based on the pin power distribution of a flat enrichment lattice and some heuristic rules. Next, a pin power distribution flattening and an enrichment grouping process are introduced to determine the enrichment of each fuel pin enrichment type and the initial enrichment distribution of a fuel lattice design. Finally, enrichment group peaking equalizing processes are performed to achieve lower lattice peaking. Several fuel lattice design constraints are also incorporated in the automation system such that the system can accomplish a design which meets the requirements of practical use. Depending on the axial position of the lattice, a different method is applied in the design of the fuel lattice. Two typical fuel lattices with U"2"3"5 enrichment of 4.471% and 4.386% were taken as references. Application of the method demonstrates that improved lattice designs can be achieved through the enrichment grouping and the enrichment group peaking equalizing method. It takes about 11 min and 1 h 11 min of CPU time for the automation system to accomplish two design cases on an HP-8000 workstation, including the execution of CASMO-4 lattice

Fuel lattice design in a boiling water reactor using a knowledge-based automation system

Energy Technology Data Exchange (ETDEWEB)

Tung, Wu-Hsiung, E-mail: wstong@iner.gov.tw; Lee, Tien-Tso; Kuo, Weng-Sheng; Yaur, Shung-Jung

2015-11-15

Highlights: • An automation system was developed for the fuel lattice radial design of BWRs. • An enrichment group peaking equalizing method is applied to optimize the design. • Several heuristic rules and restrictions are incorporated to facilitate the design. • The CPU time for the system to design a 10x10 lattice was less than 1.2 h. • The beginning-of-life LPF was improved from 1.319 to 1.272 for one of the cases. - Abstract: A knowledge-based fuel lattice design automation system for BWRs is developed and applied to the design of 10 × 10 fuel lattices. The knowledge implemented in this fuel lattice design automation system includes the determination of gadolinium fuel pin location, the determination of fuel pin enrichment and enrichment distribution. The optimization process starts by determining the gadolinium distribution based on the pin power distribution of a flat enrichment lattice and some heuristic rules. Next, a pin power distribution flattening and an enrichment grouping process are introduced to determine the enrichment of each fuel pin enrichment type and the initial enrichment distribution of a fuel lattice design. Finally, enrichment group peaking equalizing processes are performed to achieve lower lattice peaking. Several fuel lattice design constraints are also incorporated in the automation system such that the system can accomplish a design which meets the requirements of practical use. Depending on the axial position of the lattice, a different method is applied in the design of the fuel lattice. Two typical fuel lattices with U{sup 235} enrichment of 4.471% and 4.386% were taken as references. Application of the method demonstrates that improved lattice designs can be achieved through the enrichment grouping and the enrichment group peaking equalizing method. It takes about 11 min and 1 h 11 min of CPU time for the automation system to accomplish two design cases on an HP-8000 workstation, including the execution of CASMO-4

5th International Conference on Automation, Robotics and Applications (ICARA 2011)

CERN Document Server

Bailey, Donald; Demidenko, Serge; Carnegie, Dale; Recent Advances in Robotics and Automation

2013-01-01

There isn’t a facet of human life that has not been touched and influenced by robots and automation. What makes robots and machines versatile is their computational intelligence. While modern intelligent sensors and powerful hardware capabilities have given a huge fillip to the growth of intelligent machines, the progress in the development of algorithms for smart interaction, collaboration and pro-activeness will result in the next quantum jump. This book deals with the recent advancements in design methodologies, algorithms and implementation techniques to incorporate intelligence in robots and automation systems. Several articles deal with navigation, localization and mapping of mobile robots, a problem that engineers and researchers are grappling with all the time. Fuzzy logic, neural networks and neuro-fuzzy based techniques for real world applications have been detailed in a few articles. This edited volume is targeted to present the latest state-of-the-art computational intelligence techniques in Rob...

Proceedings of the 5th International Conference on Designs for Learning

DEFF Research Database (Denmark)

papers. The accepted papers revolve around a broad range of research subjects and practices within the conference theme. These include methodological questions, discussions of design-based research, presentations of educational designs and discussions of perspectives on designs for learning as self-regulated...

Some Challenges in the Design of Human-Automation Interaction for Safety-Critical Systems

Science.gov (United States)

Feary, Michael S.; Roth, Emilie

2014-01-01

Increasing amounts of automation are being introduced to safety-critical domains. While the introduction of automation has led to an overall increase in reliability and improved safety, it has also introduced a class of failure modes, and new challenges in risk assessment for the new systems, particularly in the assessment of rare events resulting from complex inter-related factors. Designing successful human-automation systems is challenging, and the challenges go beyond good interface development (e.g., Roth, Malin, & Schreckenghost 1997; Christoffersen & Woods, 2002). Human-automation design is particularly challenging when the underlying automation technology generates behavior that is difficult for the user to anticipate or understand. These challenges have been recognized in several safety-critical domains, and have resulted in increased efforts to develop training, procedures, regulations and guidance material (CAST, 2008, IAEA, 2001, FAA, 2013, ICAO, 2012). This paper points to the continuing need for new methods to describe and characterize the operational environment within which new automation concepts are being presented. We will describe challenges to the successful development and evaluation of human-automation systems in safety-critical domains, and describe some approaches that could be used to address these challenges. We will draw from experience with the aviation, spaceflight and nuclear power domains.

Designing automation for complex work environments under different levels of stress.

Science.gov (United States)

Sauer, Juergen; Nickel, Peter; Wastell, David

2013-01-01

This article examines the effectiveness of different forms of static and adaptable automation under low- and high-stress conditions. Forty participants were randomly assigned to one of four experimental conditions, comparing three levels of static automation (low, medium and high) and one level of adaptable automation, with the environmental stressor (noise) being varied as a within-subjects variable. Participants were trained for 4 h on a simulation of a process control environment, called AutoCAMS, followed by a 2.5-h testing session. Measures of performance, psychophysiology and subjective reactions were taken. The results showed that operators preferred higher levels of automation under noise than under quiet conditions. A number of parameters indicated negative effects of noise exposure, such as performance impairments, physiological stress reactions and higher mental workload. It also emerged that adaptable automation provided advantages over low and intermediate static automation, with regard to mental workload, effort expenditure and diagnostic performance. The article concludes that for the design of automation a wider range of operational scenarios reflecting adverse as well as ideal working conditions needs to be considered. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Fourth International Conference on Complex Systems Design & Management

CERN Document Server

Boulanger, Frédéric; Krob, Daniel; Marchal, Clotilde

2014-01-01

This book contains all refereed papers that were accepted to the fourth edition of the « Complex Systems Design & Management » (CSD&M 2013) international conference which took place in Paris (France) from December 4-6, 2013. These proceedings cover the most recent trends in the emerging field of complex systems sciences & practices from an industrial and academic perspective, including the main industrial domains (transport, defense & security, electronics, energy & environment, e-services), scientific & technical topics (systems fundamentals, systems architecture & engineering, systems metrics & quality, systemic tools) and system types (transportation systems, embedded systems, software & information systems, systems of systems, artificial ecosystems). The CSD&M 2013 conference is organized under the guidance of the CESAMES non-profit organization

What's New in the Library Automation Arena?

Science.gov (United States)

Breeding, Marshall

1998-01-01

Reviews trends in library automation based on vendors at the 1998 American Library Association Annual Conference. Discusses the major industry trend, a move from host-based computer systems to the new generation of client/server, object-oriented, open systems-based automation. Includes a summary of developments for 26 vendors. (LRW)

An automated methodology development. [software design for combat simulation

Science.gov (United States)

Hawley, L. R.

1985-01-01

The design methodology employed in testing the applicability of Ada in large-scale combat simulations is described. Ada was considered as a substitute for FORTRAN to lower life cycle costs and ease the program development efforts. An object-oriented approach was taken, which featured definitions of military targets, the capability of manipulating their condition in real-time, and one-to-one correlation between the object states and real world states. The simulation design process was automated by the problem statement language (PSL)/problem statement analyzer (PSA). The PSL/PSA system accessed the problem data base directly to enhance the code efficiency by, e.g., eliminating non-used subroutines, and provided for automated report generation, besides allowing for functional and interface descriptions. The ways in which the methodology satisfied the responsiveness, reliability, transportability, modifiability, timeliness and efficiency goals are discussed.

[Research and Design of a System for Detecting Automated External Defbrillator Performance Parameters].

Science.gov (United States)

Wang, Kewu; Xiao, Shengxiang; Jiang, Lina; Hu, Jingkai

2017-09-30

In order to regularly detect the performance parameters of automated external defibrillator (AED), to make sure it is safe before using the instrument, research and design of a system for detecting automated external defibrillator performance parameters. According to the research of the characteristics of its performance parameters, combing the STM32's stability and high speed with PWM modulation control, the system produces a variety of ECG normal and abnormal signals through the digital sampling methods. Completed the design of the hardware and software, formed a prototype. This system can accurate detect automated external defibrillator discharge energy, synchronous defibrillation time, charging time and other key performance parameters.

On the engineering design for systematic integration of agent-orientation in industrial automation.

Science.gov (United States)

Yu, Liyong; Schüller, Andreas; Epple, Ulrich

2014-09-01

In today's automation industry, agent-oriented development of system functionalities appears to have a great potential for increasing autonomy and flexibility of complex operations, while lowering the workload of users. In this paper, we present a reference model for the harmonious and systematical integration of agent-orientation in industrial automation. Considering compatibility with existing automation systems and best practice, this model combines advantages of function block technology, service orientation and native description methods from the automation standard IEC 61131-3. This approach can be applied as a guideline for the engineering design of future agent-oriented automation systems. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Crew aiding and automation: A system concept for terminal area operations, and guidelines for automation design

Science.gov (United States)

Dwyer, John P.

1994-01-01

This research and development program comprised two efforts: the development of guidelines for the design of automated systems, with particular emphasis on automation design that takes advantage of contextual information, and the concept-level design of a crew aiding system, the Terminal Area Navigation Decision Aiding Mediator (TANDAM). This concept outlines a system capable of organizing navigation and communication information and assisting the crew in executing the operations required in descent and approach. In service of this endeavor, problem definition activities were conducted that identified terminal area navigation and operational familiarization exercises addressing the terminal area navigation problem. Both airborne and ground-based (ATC) elements of aircraft control were extensively researched. The TANDAM system concept was then specified, and the crew interface and associated systems described. Additionally, three descent and approach scenarios were devised in order to illustrate the principal functions of the TANDAM system concept in relation to the crew, the aircraft, and ATC. A plan for the evaluation of the TANDAM system was established. The guidelines were developed based on reviews of relevant literature, and on experience gained in the design effort.

PREFACE: International Conference on Quantum Simulators and Design, Hiroshima, Japan, 3 6 December 2006

Science.gov (United States)

Akai, Hisazumi; Oguchi, Tamio

2007-09-01

This special issue of Journal of Physics: Condensed Matter comprises selected papers from the 1st International Conference on Quantum Simulators and Design (QSD2006) held in Hiroshima, Japan, 3-6 December 2006. This conference was organized under the auspices of the Development of New Quantum Simulators and Quantum Design Grant-in-Aid for Scientific Research on Priority Areas, Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT), and Hiroshima University Quantum design is a computational approach to the development of new materials with specified properties and functionalities. The basic ingredient is the use of quantum simulations to design a material that meets a given specification of properties and functionalities. For this to be successful, the quantum simulation should be highly reliable and be applicable to systems of realistic size. A central interest is, therefore, the development of new methods of quantum simulation and quantum design. This includes methods beyond the local density approximation of density functional theory (LDA), order-N methods, methods dealing with excitations and reactions, and so on, as well as the application of these methods to the design of new materials and devices. The field of quantum design has developed rapidly in the past few years and this conference provides an international forum for experimental and theoretical researchers to exchange ideas. A total of 183 delegates from 8 countries participated in the conference. There were 18 invited talks, 16 oral presentations and 100 posters. There were many new ideas and we foresee dramatic progress in the coming years. The 2nd International Conference on Quantum Simulators and Design will be held in Tokyo, Japan, 31 May-3 June 2008.

Design Automation Using Script Languages. High-Level CAD Templates in Non-Parametric Programs

Science.gov (United States)

Moreno, R.; Bazán, A. M.

2017-10-01

The main purpose of this work is to study the advantages offered by the application of traditional techniques of technical drawing in processes for automation of the design, with non-parametric CAD programs, provided with scripting languages. Given that an example drawing can be solved with traditional step-by-step detailed procedures, is possible to do the same with CAD applications and to generalize it later, incorporating references. In today’s modern CAD applications, there are striking absences of solutions for building engineering: oblique projections (military and cavalier), 3D modelling of complex stairs, roofs, furniture, and so on. The use of geometric references (using variables in script languages) and their incorporation into high-level CAD templates allows the automation of processes. Instead of repeatedly creating similar designs or modifying their data, users should be able to use these templates to generate future variations of the same design. This paper presents the automation process of several complex drawing examples based on CAD script files aided with parametric geometry calculation tools. The proposed method allows us to solve complex geometry designs not currently incorporated in the current CAD applications and to subsequently create other new derivatives without user intervention. Automation in the generation of complex designs not only saves time but also increases the quality of the presentations and reduces the possibility of human errors.

Automated reasoning applications to design validation and sneak function analysis

International Nuclear Information System (INIS)

Stratton, R.C.

1984-01-01

Argonne National Laboratory (ANL) is actively involved in the LMFBR Man-Machine Integration (MMI) Safety Program. The objective of this program is to enhance the operational safety and reliability of fast-breeder reactors by optimum integration of men and machines through the application of human factors principles and control engineering to the design, operation, and the control environment. ANL is developing methods to apply automated reasoning and computerization in the validation and sneak function analysis process. This project provides the element definitions and relations necessary for an automated reasoner (AR) to reason about design validation and sneak function analysis. This project also provides a demonstration of this AR application on an Experimental Breeder Reactor-II (EBR-II) system, the Argonne Cooling System

Automated Design of Propellant-Optimal, End-to-End, Low-Thrust Trajectories for Trojan Asteroid Tours

Science.gov (United States)

Stuart, Jeffrey; Howell, Kathleen; Wilson, Roby

2013-01-01

The Sun-Jupiter Trojan asteroids are celestial bodies of great scientific interest as well as potential resources offering water and other mineral resources for longterm human exploration of the solar system. Previous investigations under this project have addressed the automated design of tours within the asteroid swarm. This investigation expands the current automation scheme by incorporating options for a complete trajectory design approach to the Trojan asteroids. Computational aspects of the design procedure are automated such that end-to-end trajectories are generated with a minimum of human interaction after key elements and constraints associated with a proposed mission concept are specified.

Automation of fusion first wall design using artificial intelligence technique

International Nuclear Information System (INIS)

Yoshimura, Shinobu; Yagawa, Genki; Mochizuki, Yoshihiko

1990-01-01

This paper describes the application of artificial intelligence techniques to a design automation of the fusion first wall to be operated in the complex environment where huge electromagnetic and thermal loading as well as heavy neutron irradiation occur. As a basic strategy of designing structure shape considering many coupled phenomena, an ordinary design procedure based on the generate and test strategy is adopted because of its simplicity and broad applicability. To automate the design procedure with maintaining its flexibility, extensibility and efficiency, artificial intelligence techniques are utilized in the following. An object-oriented knowledge representation technique is adopted to store knowledge modules, that is, objects, related to the first wall design, while a data-flow processing technique is utilized as an inference mechanism among the knowledge modules. These techniques realize the flexibility and extensibility of the system. Moreover, as an efficient design modification mechanism, which is essential in a design process, an empirical approach based on experts' empirical knowledge and a mathematical approach based on a kind of numerical sensitivity analysis are introduced. The developed system is applied to a simple example of the design of a two-dimensional model of the first wall with a cooling channel, and its fundamental performance is clearly demonstrated. (author)

A Review Of Design And Control Of Automated Guided Vehicle Systems

NARCIS (Netherlands)

T. Le-Anh (Tuan); M.B.M. de Koster (René)

2004-01-01

textabstractThis paper presents a review on design and control of automated guided vehicle systems. We address most key related issues including guide-path design, estimating the number of vehicles, vehicle scheduling, idle-vehicle positioning, battery management, vehicle routing, and conflict

Geometry Based Design Automation : Applied to Aircraft Modelling and Optimization

OpenAIRE

Amadori, Kristian

2012-01-01

Product development processes are continuously challenged by demands for increased efficiency. As engineering products become more and more complex, efficient tools and methods for integrated and automated design are needed throughout the development process. Multidisciplinary Design Optimization (MDO) is one promising technique that has the potential to drastically improve concurrent design. MDO frameworks combine several disciplinary models with the aim of gaining a holistic perspective of ...

Proceedings of the 18th International Conference on Engineering Design (ICED11)

DEFF Research Database (Denmark)

Maier, Anja; Mougaard, Krestine; Howard, Thomas J.

The ICED series of conferences is the Design Society's "flagship" event. ICED11 took place on August 15-18, 2011, at the campus of the Danish Technical University in Lyngby/Copenhagen, Denmark. The Proceedings of the conference are published in 10 individual volumes, arranged according to topics....... All volumes of the Proceedings may be purchased individually through Amazon and other on-line booksellers. For members of the Design Society, all papers are available on this website. The Programme and Abstract Book is publically available for download....

International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)

CERN Document Server

Instrumentation, Measurement, Circuits and Systems

2012-01-01

The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011.   Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings.   This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation...

Proceeding of the ACM/IEEE-CS Joint Conference on Digital Libraries (1st, Roanoke, Virginia, June 24-28, 2001).

Science.gov (United States)

Association for Computing Machinery, New York, NY.

Papers in this Proceedings of the ACM/IEEE-CS Joint Conference on Digital Libraries (Roanoke, Virginia, June 24-28, 2001) discuss: automatic genre analysis; text categorization; automated name authority control; automatic event generation; linked active content; designing e-books for legal research; metadata harvesting; mapping the…

Analog integrated circuit design automation placement, routing and parasitic extraction techniques

CERN Document Server

Martins, Ricardo; Horta, Nuno

2017-01-01

This book introduces readers to a variety of tools for analog layout design automation. After discussing the placement and routing problem in electronic design automation (EDA), the authors overview a variety of automatic layout generation tools, as well as the most recent advances in analog layout-aware circuit sizing. The discussion includes different methods for automatic placement (a template-based Placer and an optimization-based Placer), a fully-automatic Router and an empirical-based Parasitic Extractor. The concepts and algorithms of all the modules are thoroughly described, enabling readers to reproduce the methodologies, improve the quality of their designs, or use them as starting point for a new tool. All the methods described are applied to practical examples for a 130nm design process, as well as placement and routing benchmark sets. Introduces readers to hierarchical combination of Pareto fronts of placements; Presents electromigration-aware routing with multilayer multiport terminal structures...

A utilization of fuzzy control for design automation of nuclear structures

International Nuclear Information System (INIS)

Yoshimura, Shinobu; Yagawa, Genki; Mochizuki, Yoshihiko

1991-01-01

This paper describes an automated design of nuclear structures by means of some artificial intelligence techniques. The 'generate and test' strategy is adopted as a basic strategy of design. An empirical approach with the fuzzy control is introduced for efficient design modification. This system is applied to the design of some 2D models of the fusion first wall. (author)

Application of the H-Mode, a Design and Interaction Concept for Highly Automated Vehicles, to Aircraft

Science.gov (United States)

Goodrich, Kenneth H.; Flemisch, Frank O.; Schutte, Paul C.; Williams, Ralph A.

2006-01-01

Driven by increased safety, efficiency, and airspace capacity, automation is playing an increasing role in aircraft operations. As aircraft become increasingly able to autonomously respond to a range of situations with performance surpassing human operators, we are compelled to look for new methods that help us understand their use and guide their design using new forms of automation and interaction. We propose a novel design metaphor to aid the conceptualization, design, and operation of highly-automated aircraft. Design metaphors transfer meaning from common experiences to less familiar applications or functions. A notable example is the "Desktop metaphor" for manipulating files on a computer. This paper describes a metaphor for highly automated vehicles known as the H-metaphor and a specific embodiment of the metaphor known as the H-mode as applied to aircraft. The fundamentals of the H-metaphor are reviewed followed by an overview of an exploratory usability study investigating human-automation interaction issues for a simple H-mode implementation. The envisioned application of the H-mode concept to aircraft is then described as are two planned evaluations.

Form Follows Function: Designer Chemistry at the 52nd Bürgenstock Conference.

Science.gov (United States)

Heretsch, Philipp

2017-07-24

The 52nd Bürgenstock Conference on Stereochemistry took place from April 30-May 4, 2017, and showed how chemistry and design go hand-in-hand (as reflected in the image of the Bauhausarchiv in Berlin). In this Conference Report, Philipp Heretsch outlines the program. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

PREFACE: Proceedings of the 2nd International Conference on Quantum Simulators and Design (Tokyo, Japan, 31 May-3 June 2008) Proceedings of the 2nd International Conference on Quantum Simulators and Design (Tokyo, Japan, 31 May-3 June 2008)

Science.gov (United States)

Akai, Hisazumi; Tsuneyuki, Shinji

2009-02-01

This special issue of Journal of Physics: Condensed Matter comprises selected papers from the proceedings of the 2nd International Conference on Quantum Simulators and Design (QSD2008) held in Tokyo, Japan, between 31 May and 3 June 2008. This conference was organized under the auspices of the Development of New Quantum Simulators and Quantum Design Grant-in-Aid for Scientific Research on Priority Areas, Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT). The conference focused on the development of first principles electronic structure calculations and their applications. The aim was to provide an opportunity for discussion on the progress in computational materials design and, in particular, the development of quantum simulators and quantum design. Computational materials design is a computational approach to the development of new materials. The essential ingredient is the use of quantum simulators to design a material that meets a given specification of properties and functionalities. For this to be successful, the quantum simulator should be very reliable and be applicable to systems of realistic size. During the conference, new methods of quantum simulation and quantum design were discussed including methods beyond the local density approximation of density functional theory, order-N methods, methods dealing with excitations and reactions, and the application of these methods to the design of novel materials, devices and systems. The conference provided an international forum for experimental and theoretical researchers to exchange ideas. A total of 220 delegates from eight countries participated in the conference. There were 13 invited talks, ten oral presentations and 120 posters. The 3rd International Conference on Quantum Simulators and Design will be held in Germany in the autumn of 2011.

11th Portuguese Conference on Automatic Control

CERN Document Server

Matos, Aníbal; Veiga, Germano

2015-01-01

During the last 20 years the Portuguese association of automatic control, Associação Portuguesa de Controlo Automático, with the sponsorship of IFAC have established the CONTROLO conference as a reference international forum where an effective exchange of knowledge and experience amongst researchers active in various theoretical and applied areas of systems and control can take place, always including considerable space for promoting new technical applications and developments, real-world challenges and success stories. In this 11th edition the CONTROLO conference evolved by introducing two strategic partnerships with Spanish and Brazilian associations in automatic control, Comité Español de Automática and Sociedade Brasileira de Automatica, respectively.

Designing an automated blood fractionation system.

Science.gov (United States)

McQuillan, Adrian C; Sales, Sean D

2008-04-01

UK Biobank will be collecting blood samples from a cohort of 500 000 volunteers and it is expected that the rate of collection will peak at approximately 3000 blood collection tubes per day. These samples need to be prepared for long-term storage. It is not considered practical to manually process this quantity of samples so an automated blood fractionation system is required. Principles of industrial automation were applied to the blood fractionation process leading to the requirement of developing a vision system to identify the blood fractions within the blood collection tube so that the fractions can be accurately aspirated and dispensed into micro-tubes. A prototype was manufactured and tested on a range of human blood samples collected in different tube types. A specially designed vision system was capable of accurately measuring the position of the plasma meniscus, plasma/buffy coat interface and the red cells/buffy coat interface within a vacutainer. A rack of 24 vacutainers could be processed in blood fractionation system offers a solution to the problem of processing human blood samples collected in vacutainers in a consistent manner and provides a means of ensuring data and sample integrity.

Automated design of genomic Southern blot probes

Directory of Open Access Journals (Sweden)

Komiyama Noboru H

2010-01-01

experimentally validate a number of these automated designs by Southern blotting. The majority of probes we tested performed well confirming our in silico prediction methodology and the general usefulness of the software for automated genomic Southern probe design. Conclusions Software and supplementary information are freely available at: http://www.genes2cognition.org/software/southern_blot

The Automation Control System Design of Walking Beam Heating Furnace

Directory of Open Access Journals (Sweden)

Hong-Yu LIU

2014-10-01

Full Text Available Combining the transformation project of certain strip steel rolling production line, the techniques process of walking beam heating furnace was elaborated in this paper. The practical application of LOS-T18-2ZC1 laser detector was elaborated. The network communication model of walking beam heating furnace control system was designed. The realization method of production process automation control was elaborated. The entire automation control system allocation picture and PLC power distribution system picture of walking beam heating furnace were designed. Charge machine movement process was elaborated. Walking beam movement process was elaborated. Extractor movement process was elaborated. The hydraulic station of walking mechanism was elaborated. Relative control circuit diagram was designed. The control function of parallel shift motor, uplifted and degressive motor was elaborated. The control circuit diagram of parallel shift motor of charge machine and extractor of first heating furnace was designed. The control circuit diagram of uplifted and degressive motor of charge machine and extractor of first heating furnace was designed. The realization method of steel blank length test function was elaborated. The realization method of tracking and sequence control function of heating furnace field roller were elaborated. The design provides important reference base for enhancing walking beam heating furnace control level.

7th International Conference on Design Computing and Cognition

CERN Document Server

2017-01-01

This book gathers the peer-reviewed and revised versions of papers from the Seventh International Conference on Design Computing and Cognition (DCC'16), held at Northwestern University, Evanston (Chicago), USA, from 27–29 June 2016. The material presented here reflects cutting-edge design research with a focus on artificial intelligence, cognitive science and computational theories. The papers are grouped under the following nine headings, describing advances in theory and applications alike and demonstrating the depth and breadth of design computing and design cognition: Design Creativity; Design Cognition - Design Approaches; Design Support; Design Grammars; Design Cognition - Design Behaviors; Design Processes; Design Synthesis; Design Activity and Design Knowledge. The book will be of particular interest to researchers, developers and users of advanced computation in design across all disciplines, and to all readers who need to gain a better understanding of designing.

An Automated Design Approach for High-Lift Systems incorporating Eccentric Beam Actuators

NARCIS (Netherlands)

Steenhuizen, D.; Van Tooren, M.J.L.

2010-01-01

In order to asess the merit of novel high-lift structural concepts to the design of contemporary and future transport aircraft, a highly automated design routine is elaborated. The structure, purpose and evolution of this design routine is set-out with the use of Knowledge-Based Engineering

Ninth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, volume 1

Science.gov (United States)

Soderquist, Joseph R. (Compiler); Neri, Lawrence M. (Compiler); Bohon, Herman L. (Compiler)

1992-01-01

This publication contains the proceedings of the Ninth DOD/NASA/FAA conference on Fibrous Composites in structural Design. Presentations were made in the following areas of composite structural design: perspectives in composites; design methodology; design applications; design criteria; supporting technology; damage tolerance; and manufacturing.

Automated firewall analytics design, configuration and optimization

CERN Document Server

Al-Shaer, Ehab

2014-01-01

This book provides a comprehensive and in-depth study of automated firewall policy analysis for designing, configuring and managing distributed firewalls in large-scale enterpriser networks. It presents methodologies, techniques and tools for researchers as well as professionals to understand the challenges and improve the state-of-the-art of managing firewalls systematically in both research and application domains. Chapters explore set-theory, managing firewall configuration globally and consistently, access control list with encryption, and authentication such as IPSec policies. The author

Proceedings of the Third MDEP Conference on New Reactor Design Activities

International Nuclear Information System (INIS)

Holahan, Gary; Burkhart, Lawrence; Santos, Daniel J.; Mourlon, Sophie; Virolainen, Tapani; Lagarde, Dominique; Rasmussen, Richard; Johnson, Gary; Jun Wei, Xue; Prinja, Nawal; Ennis, Kevin; Buisine, Denis

2014-05-01

The MDEP is a unique multinational initiative leveraging the resources and knowledge of national regulators to review new reactor designs. The programme celebrated its 10. anniversary in 2006 and is recognised as an effective framework for regulatory co-operation and harmonisation. Over the first 10 years of its existence, MDEP has published 24 common positions and 13 technical reports. In order to gather feedback on its current activities and discuss its future, MDEP organised its third conference at Bethesda, Maryland, USA on 14-15 May 2014. The event provided a forum for MDEP stakeholders (including industry representatives, standard development organisations and other international organisations) to share the results of their engagement with the program and to deliver presentations on ongoing activities related to new reactor licensing. The two-day conference included sessions on Design-Specific Working Groups, Commissioning Activities, Vendor Inspection, Digital Instrumentation and Control, New reactor activities related to the Fukushima Daiichi accident, codes and standards harmonisation, MDEP Way Forward and Related Activities. This document gathers the available presentations (slides) given at the conference

Academic poster design at a national conference: a need for standardised guidance?

Science.gov (United States)

Gopal, Alan; Redman, Melody; Cox, David; Foreman, David; Elsey, Elizabeth; Fleming, Simon

2017-10-01

Academic posters are a common means of disseminating information at conferences. Presentation at conferences is frequently given weight in postgraduate training programme recruitment. Some conferences provide guidance for visual presentation of posters. For the Association of the Study of Medical Education (ASME) Annual Scientific Meeting (ASM) 2015, poster abstract guidance was provided; however, the guidance on poster design was limited to size and orientation. The aim of this study was to investigate academic poster quality at a national medical education conference to identify where standards could be promoted and improved. Presentation at conferences is frequently given weight in postgraduate training programme recruitment METHODS: Six auditors assessed all posters displayed at the ASME ASM (15-17 July 2015) using guidelines based upon a modified checklist for academic posters. Ten criteria were agreed as assessment standards for poster design quality. One-hundred-and-eighty posters were assessed: 29 per cent had appropriate copyright for the materials displayed (n = 52); 41 per cent included suitable contact details (n = 73); 48 per cent (n = 87) had a text to graphic ratio of 50 : 50; 72 per cent (n = 130) met ASME guidance for layout and orientation; 76 per cent (n = 137) had appropriate referencing; 78 per cent showed evidence of proofreading for grammar and spelling (n = 140); 79 per cent (n = 142) were readable at a distance of 2 metres; and 87 per cent used appropriate academic logos (n = 156). There was variability in design quality as assessed by these criteria. We recommend that detailed guidance should be produced and disseminated by the organising conference. This may improve poster quality and aid in the communication of presented material. We aim to re-audit following the production and dissemination of poster presentation guidance. © 2016 John Wiley & Sons Ltd and The Association for the Study of Medical

6th International Conference on Design Computing and Cognition

CERN Document Server

Hanna, Sean

2015-01-01

This book details the state-of-the-art of research and development in design computing and design cognition. It features more than 35 papers that were presented at the Sixth International Conference on Design Computing and Cognition, DCC’14, held at University College, London, UK. Inside, readers will find the work of expert researchers and practitioners that explores both advances in theory and application as well as demonstrates the depth and breadth of design computing and design cognition. This interdisciplinary coverage, which includes material from international research groups, examines design synthesis, design cognition, design creativity, design processes, design theory, design grammars, design support, and design ideation. Overall, the papers provide a bridge between design computing and design cognition. The confluence of these two fields continues to build the foundation for further advances and leads to an increased understanding of design as an activity whose influence continues to spread. ...

5th International Conference on Research into Design

CERN Document Server

2015-01-01

This book showcases cutting-edge research papers from the 5th International Conference on Research into Design – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design across boundaries. The special features of the book are the variety of insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the largest collection of research from India. For practitioners and educators, it is exposure to an empirically validated suite of theories, models, methods and tools that can be taught and practiced for design-led innovation.

MIDAS: Automated Approach to Design Microwave Integrated Inductors and Transformers on Silicon

Directory of Open Access Journals (Sweden)

L. Aluigi

2013-09-01

Full Text Available The design of modern radiofrequency integrated circuits on silicon operating at microwave and millimeter-waves requires the integration of several spiral inductors and transformers that are not commonly available in the process design-kits of the technologies. In this work we present an auxiliary CAD tool for Microwave Inductor (and transformer Design Automation on Silicon (MIDAS that exploits commercial simulators and allows the implementation of an automatic design flow, including three-dimensional layout editing and electromagnetic simulations. In detail, MIDAS allows the designer to derive a preliminary sizing of the inductor (transformer on the bases of the design entries (specifications. It draws the inductor (transformer layers for the specific process design kit, including vias and underpasses, with or without patterned ground shield, and launches the electromagnetic simulations, achieving effective design automation with respect to the traditional design flow for RFICs. With the present software suite the complete design time is reduced significantly (typically 1 hour on a PC based on Intel® Pentium® Dual 1.80GHz CPU with 2-GB RAM. Afterwards both the device equivalent circuit and the layout are ready to be imported in the Cadence environment.

SIAM Conference on Computational Science and Engineering

Energy Technology Data Exchange (ETDEWEB)

None, None

2005-08-29

The Second SIAM Conference on Computational Science and Engineering was held in San Diego from February 10-12, 2003. Total conference attendance was 553. This is a 23% increase in attendance over the first conference. The focus of this conference was to draw attention to the tremendous range of major computational efforts on large problems in science and engineering, to promote the interdisciplinary culture required to meet these large-scale challenges, and to encourage the training of the next generation of computational scientists. Computational Science & Engineering (CS&E) is now widely accepted, along with theory and experiment, as a crucial third mode of scientific investigation and engineering design. Aerospace, automotive, biological, chemical, semiconductor, and other industrial sectors now rely on simulation for technical decision support. For federal agencies also, CS&E has become an essential support for decisions on resources, transportation, and defense. CS&E is, by nature, interdisciplinary. It grows out of physical applications and it depends on computer architecture, but at its heart are powerful numerical algorithms and sophisticated computer science techniques. From an applied mathematics perspective, much of CS&E has involved analysis, but the future surely includes optimization and design, especially in the presence of uncertainty. Another mathematical frontier is the assimilation of very large data sets through such techniques as adaptive multi-resolution, automated feature search, and low-dimensional parameterization. The themes of the 2003 conference included, but were not limited to: Advanced Discretization Methods; Computational Biology and Bioinformatics; Computational Chemistry and Chemical Engineering; Computational Earth and Atmospheric Sciences; Computational Electromagnetics; Computational Fluid Dynamics; Computational Medicine and Bioengineering; Computational Physics and Astrophysics; Computational Solid Mechanics and Materials; CS

6th International Conference on Research into Design

CERN Document Server

Chakrabarti, Debkumar; ICoRD 2017; Research into design for communities

2017-01-01

This book showcases cutting-edge research papers from the 6th International Conference on Research into Design (ICoRD 2017) – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design for communities. While design traditionally focused on the development of products for the individual, the emerging consensus on working towards a more sustainable world demands greater attention to designing for and with communities, so as to promote their sustenance and harmony - within each community and across communities. The special features of the book are the insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the...

2nd Asia-Pacific Conference on Complex Systems Design & Management

CERN Document Server

Fong, Saik; Krob, Daniel; Lui, Pao; Tan, Yang

2016-01-01

This book contains all refereed papers that were accepted to the second edition of the Asia-Pacific conference on « Complex Systems Design & Management Asia» (CSD&M Asia 2016) that took place in Singapore from February 24 to February 26, 2016 (Website: http://www.2016.csdm-asia.net/). These proceedings cover the most recent trends in the emerging field of Complex Systems, both from an academic and a professional perspective. A special focus is put on Smart Nations: Designing and Sustaining. The CSD&M Asia 2016 conference is organized under the guidance of the Singapore division of the Center of Excellence on Systems Architecture, Management, Economy and Strategy (CESAMES) – Legal address: C.E.S.A.M.E.S. Singapore – 16 Raffles Quay – #38-03 Hong Leong Building – Singapore 048581 (website : http://www.cesames.net/en – email: contact@cesames.net).

9th Asian Conference on Computer-Aided Surgery

CERN Document Server

2016-01-01

This book presents the latest research advances in the theory, design, control, and application of robot systems intended for a variety of purposes such as manipulation, manufacturing, automation, surgery, locomotion, and biomechanics. Several chapters deal with fundamental kinematics in nature, including synthesis, calibration, redundancy, force control, dexterity, inverse and forward kinematics, kinematic singularities, and over-constrained systems. This book is a compilation of the extended versions of the very best papers selected from the many that were presented at the Asian Conference on Computer-Aided Surgery held September 16–18, 2013, in Tokyo, Japan (ACCAS 2013).

Proceedings of the 17. IASTED international conference on modelling and simulation

Energy Technology Data Exchange (ETDEWEB)

Wamkeue, R. (comp.) [Quebec Univ., Abitibi-Temiscaminque, PQ (Canada)

2006-07-01

The International Association of Science and Technology for Development (IASTED) hosted this conference to provide a forum for international researchers and practitioners interested in all areas of modelling and simulation. The conference featured 12 sessions entitled: (1) automation, control and robotics, (2) hydraulic and hydrologic modelling, (3) applications in processes and design optimization, (4) environmental systems, (5) biomedicine and biomechanics, (6) communications, computers and informatics 1, (7) economics, management and operations research 1, (8) modelling and simulation methodologies 1, (9) economics, management and operations research 2, (10) modelling, optimization, identification and simulation, (11) communications, computers and informatics 2, and, (12) modelling and simulation methodologies 2. Participants took the opportunity to present the latest research, results, and ideas in mathematical modelling; physically-based modelling; agent-based modelling; dynamic modelling; 3-dimensional modelling; computational geometry; time series analysis; finite element methods; discrete event simulation; web-based simulation; Monte Carlo simulation; simulation optimization; simulation uncertainty; fuzzy systems; data modelling; computer aided design; and, visualization. Case studies in engineering design were also presented along with simulation tools and languages. The conference also highlighted topical issues in environmental systems modelling such as air modelling and simulation, atmospheric modelling, hazardous materials, mobile source emissions, ecosystem modelling, hydrological modelling, aquatic ecosystems, terrestrial ecosystems, biological systems, agricultural modelling, terrain analysis, meteorological modelling, earth system modelling, climatic modelling, and natural resource management. The conference featured 110 presentations, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs.

6th International Conference on Complex Systems Design & Management

CERN Document Server

Bocquet, Jean-Claude; Bonjour, Eric; Krob, Daniel

2016-01-01

This book contains all refereed papers that were accepted to the sixth edition of the « Complex Systems Design & Management Paris » (CSD&M Paris 2015) international conference which took place in Paris (France) on November 23-25, 2015. These proceedings cover the most recent trends in the emerging field of complex systems sciences & practices from an industrial and academic perspective, including the main industrial domains (aeronautics & aerospace, defense & security, electronics & robotics, energy & environment, health & welfare, software & e-services, transportation), scientific & technical topics (systems fundamentals, systems architecture & engineering, systems metrics & quality, systems modeling tools) and systems types (artificial ecosystems, embedded systems, software & information systems, systems of systems, transportation systems). The CSD&M Paris 2015 conference is organized under the guidance of the CESAMES non-profit organization, address...

Proceedings of the 5. biennial international pipeline conference, IPC 2004 : the power of technology

International Nuclear Information System (INIS)

Paulson, K.; Kraft, H.; Hopkins, P.

2004-01-01

The fifth international pipeline conference provided a forum for experts in the pipeline industry, academia and governments to discuss new technologies and approaches to pipeline transport. Presentations focused on a wide range of issues related to pipeline engineering. The conference was divided into 16 main sessions: (1) compression and pump technologies, (2) corrosion protection and analysis techniques, (3) pipeline design and construction, (4) environmental issues, (5) database development, (6) emerging issues and innovative projects, (7) inspection techniques, (8) integrity management, (9) joining, (10) materials, (11) offshore issues, (12) operations and maintenance, (13) pipeline automation and measurement, (14) pipelining in northern environments, (15) risk and reliability, (16) standards and regulations. The presentations provided up-to-date information related to future technology trends as well as recent innovations and practices. Pipeline design standards and new pipeline materials using high strength steels and reinforced composite plastic coatings were also reviewed. Other sessions discussed emerging technologies for inspection, quality control, ultrasonic testing, and the use of remote sensors. The conference also included a student paper competition. A total of 339 peer reviewed presentations were given at the conference, all of which were indexed separately for inclusion in this database. refs., tabs., fig.

Ninth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, volume 2

Energy Technology Data Exchange (ETDEWEB)

Soderquist, J.R.; Neri, L.M.; Bohon, H.L.

1992-09-01

This publication contains the proceedings of the Ninth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design held at Lake Tahoe, Nevada, during 4-7 Nov. 1991. Presentations were made in the following areas of composite structural design: perspectives in composites, design methodology, design applications, design criteria, supporting technology, damage tolerance, and manufacturing.

Ninth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, volume 3

Science.gov (United States)

Soderquist, Joseph R. (Compiler); Neri, Lawrence M. (Compiler); Bohon, Herman L. (Compiler)

1992-01-01

This publication contains the proceedings of the Ninth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design held at Lake Tahoe, Nevada, during 4-7 Nov. 1991. Presentations were made in the following areas of composite structural design: perspectives in composites, design methodology, design applications, design criteria, supporting technology, damage tolerance, and manufacturing.

Ninth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, volume 2

Science.gov (United States)

Soderquist, Joseph R. (Compiler); Neri, Lawrence M. (Compiler); Bohon, Herman L. (Compiler)

1992-01-01

This publication contains the proceedings of the Ninth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design held at Lake Tahoe, Nevada, during 4-7 Nov. 1991. Presentations were made in the following areas of composite structural design: perspectives in composites, design methodology, design applications, design criteria, supporting technology, damage tolerance, and manufacturing.

2014 Joint Conference on Mechanical Design Engineering and Advanced Manufacturing

CERN Document Server

Daidie, Alain; Eynard, Benoit; Paredes, Manuel

2016-01-01

Covering key topics in the field such as technological innovation, human-centered sustainable engineering and manufacturing, and manufacture at a global scale in a virtual world, this book addresses both advanced techniques and industrial applications of key research in interactive design and manufacturing. Featuring the full papers presented at the 2014 Joint Conference on Mechanical Design Engineering and Advanced Manufacturing, which took place in June 2014 in Toulouse, France, it presents recent research and industrial success stories related to implementing interactive design and manufacturing solutions.

Control and automation, and energy system engineering

Energy Technology Data Exchange (ETDEWEB)

Kim, Tai-hoon [Hannam Univ., Daejeon (Korea, Republic of); Adeli, Hojjat [Ohio State Univ., Columbus, OH (United States); Stoica, Adrian [Jet Propulsion Laboratory, Pasadena, CA (United States); Kang, Byeong-Ho (eds.) [Tasmania Univ., Hobart, TAS (Australia)

2011-07-01

This book comprises selected papers of the International Conferences, CA and CES3 2011, held as Part of the Future Generation Information Technology Conference, FGIT 2011, in Conjunction with GDC 2011, Jeju Island, Korea, in December 2011. The papers presented were carefully reviewed and selected from numerous submissions and focused on the various aspects of control and automation, and circuits, control, communication, electricity, electronics, energy, system, signal and simulation. (orig.)

Preliminary design of a production automation framework for a pyroprocessing facility

Directory of Open Access Journals (Sweden)

Moonsoo Shin

2018-04-01

Full Text Available Pyroprocessing technology has been regarded as a promising solution for recycling spent fuel in nuclear power plants. The Korea Atomic Energy Research Institute has been studying the current status of equipment and facilities for pyroprocessing and found that existing facilities are manually operated; therefore, their applications have been limited to laboratory scale because of low productivity and safety concerns. To extend the pyroprocessing technology to a commercial scale, the facility, including all the processing equipment and the material-handling devices, should be enhanced in view of automation. In an automated pyroprocessing facility, a supervised control system is needed to handle and manage material flow and associated operations. This article provides a preliminary design of the supervising system for pyroprocessing. In particular, a manufacturing execution system intended for an automated pyroprocessing facility, named Pyroprocessing Execution System, is proposed, by which the overall production process is automated via systematic collaboration with a planning system and a control system. Moreover, a simulation-based prototype system is presented to illustrate the operability of the proposed Pyroprocessing Execution System, and a simulation study to demonstrate the interoperability of the material-handling equipment with processing equipment is also provided. Keywords: Manufacturing Execution System, Material-handling, Production Automation, Production Planning and Control, Pyroprocessing, Pyroprocessing Execution System

55th International Conference of Machine Design Departments 2014

CERN Document Server

Berka, Ondrej; Petr, Karel; Lopot, František; Dub, Martin

2016-01-01

This book is based on the 55th International Conference of Machine Design Departments 2014 (ICMD 2014) which was hosted by the Czech Technical University in September 2014. It features scientific articles which solve progressive themes from the field of machine design. The book addresses a broad range of themes including tribology, hydraulics, materials science, product innovation and experimental methods. It presents the latest interdisciplinary high-tech work. People with an interest in the latest research results in the field of machine design and manufacturing engineering will value this book with contributions of leading academic scientists and experts from all around the world.

Ninth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, volume 1

Energy Technology Data Exchange (ETDEWEB)

Soderquist, J.R.; Neri, L.M.; Bohon, H.L.

1992-09-01

This publication contains the proceedings of the Ninth DOD/NASA/FAA conference on Fibrous Composites in structural Design. Presentations were made in the following areas of composite structural design: perspectives in composites; design methodology; design applications; design criteria; supporting technology; damage tolerance; and manufacturing. Separate abstracts have been indexed into the database for articles from this report.

Automating analog design: Taming the shrew

Science.gov (United States)

Barlow, A.

1990-01-01

The pace of progress in the design of integrated circuits continues to amaze observers inside and outside of the industry. Three decades ago, a 50 transistor chip was a technological wonder. Fifteen year later, a 5000 transistor device would 'wow' the crowds. Today, 50,000 transistor chips will earn a 'not too bad' assessment, but it takes 500,000 to really leave an impression. In 1975 a typical ASIC device had 1000 transistors, took one year to first samples (and two years to production) and sold for about 5 cents per transistor. Today's 50,000 transistor gate array takes about 4 months from spec to silicon, works the first time, and sells for about 0.02 cents per transistor. Fifteen years ago, the single most laborious and error prone step in IC design was the physical layout. Today, most IC's never see the hand of a layout designer: and automatic place and route tool converts the engineer's computer captured schematic to a complete physical design using a gate array or a library of standard cells also created by software rather than by designers. CAD has also been a generous benefactor to the digital design process. The architect of today's digital systems creates the design using an RTL or other high level simulator. Then the designer pushes a button to invoke the logic synthesizer-optimizer tool. A fault analyzer checks the result for testability and suggests where scan based cells will improve test coverage. One obstinate holdout amidst this parade of progress is the automation of analog design and its reduction to semi-custom techniques. This paper investigates the application of CAD techniques to analog design.

Design and analysis on sorting blade for automated size-based sorting device

Science.gov (United States)

Razali, Zol Bahri; Kader, Mohamed Mydin M. Abdul; Samsudin, Yasser Suhaimi; Daud, Mohd Hisam

2017-09-01

Nowadays rubbish separating or recycling is a main problem of nation, where peoples dumped their rubbish into dumpsite without caring the value of the rubbish if it can be recycled and reused. Thus the author proposed an automated segregating device, purposely to teach people to separate their rubbish and value the rubbish that can be reused. The automated size-based mechanical segregating device provides significant improvements in terms of efficiency and consistency in this segregating process. This device is designed to make recycling easier, user friendly, in the hope that more people will take responsibility if it is less of an expense of time and effort. This paper discussed about redesign a blade for the sorting device which is to develop an efficient automated mechanical sorting device for the similar material but in different size. The machine is able to identify the size of waste and it depends to the coil inside the container to separate it out. The detail design and methodology is described in detail in this paper.

Embodied Making and Design Learning - Special Issue from the Learn X Design-conference DRS/CUMULUS, Chicago 2015

Directory of Open Access Journals (Sweden)

Marte Sørebø Gulliksen

2016-06-01

Full Text Available This issue of FORMakademisk features selected articles developed from papers presented at the symposium Embodied Making and Design Learning at the DRS/CUMULUS-conference LearnXDesign in Chicago, Illinois, June 28–30, 2015. This special issue was developed as an initiative by the symposium conveners. The symposium was developed by researchers from research groups in Norway, Finland and Canada to explore various aspects of embodied making in relation to design learning. The symposium was a full-day event with four sessions, seven paper presentations, a roundtable discussion, a plenary discussion and a workshop. The symposium received positive feedback, attracting many participants and stimulating engaged discussions throughout the conference. This indicates a growing awareness of the topic of embodied making and design learning. This special issue features five articles that together highlight a variety of approaches and examples of current research endeavours in relation to the theme. 

Designing Automated Guidance to Promote Productive Revision of Science Explanations

Science.gov (United States)

Tansomboon, Charissa; Gerard, Libby F.; Vitale, Jonathan M.; Linn, Marcia C.

2017-01-01

Supporting students to revise their written explanations in science can help students to integrate disparate ideas and develop a coherent, generative account of complex scientific topics. Using natural language processing to analyze student written work, we compare forms of automated guidance designed to motivate productive revision and help…

7th International Conference on Complex Systems Design & Management

CERN Document Server

Goubault, Eric; Krob, Daniel; Stephan, François

2017-01-01

This book contains all refereed papers that were accepted to the seventh edition of the international conference « Complex Systems Design & Management Paris» (CSD&M Paris 2016) which took place in Paris (France) on the December 13-14, 2016 These proceedings cover the most recent trends in the emerging field of complex systems sciences & practices from an industrial and academic perspective, including the main industrial domains (aeronautic & aerospace, defense & security, electronics & robotics, energy & environment, healthcare & welfare services, software & e-services, transportation), scientific & technical topics (systems fundamentals, systems architecture & engineering, systems metrics & quality, system is modeling tools) and system types (artificial ecosystems, embedded systems, software & information systems, systems of systems, transportation systems). The CSD&M Paris 2016 conference is organized under the guidance of the CESAMES non-profit orga...

5th International Conference on Complex Systems Design & Management

CERN Document Server

Krob, Daniel; Morel, Gérard; Roussel, Jean-Claude

2015-01-01

This book contains all refereed papers that were accepted to the fifth edition of the « Complex Systems Design & Management » (CSD&M 2014) international conference which took place in Paris (France) on the November 12-14, 2014. These proceedings cover the most recent trends in the emerging field of complex systems sciences & practices from an industrial and academic perspective, including the main industrial domains (aeronautic & aerospace, transportation & systems, defense & security, electronics & robotics, energy & environment, health & welfare services, software & e-services), scientific & technical topics (systems fundamentals, systems architecture & engineering, systems metrics & quality, systemic tools) and system types (transportation systems, embedded systems, software & information systems, systems of systems, artificial ecosystems). The CSD&M 2014 conference is organized under the guidance of the CESAMES non-profit organization, addres...

Surrogate-Assisted Genetic Programming With Simplified Models for Automated Design of Dispatching Rules.

Science.gov (United States)

Nguyen, Su; Zhang, Mengjie; Tan, Kay Chen

2017-09-01

Automated design of dispatching rules for production systems has been an interesting research topic over the last several years. Machine learning, especially genetic programming (GP), has been a powerful approach to dealing with this design problem. However, intensive computational requirements, accuracy and interpretability are still its limitations. This paper aims at developing a new surrogate assisted GP to help improving the quality of the evolved rules without significant computational costs. The experiments have verified the effectiveness and efficiency of the proposed algorithms as compared to those in the literature. Furthermore, new simplification and visualisation approaches have also been developed to improve the interpretability of the evolved rules. These approaches have shown great potentials and proved to be a critical part of the automated design system.

Proceedings of the 2. MDEP Conference on New Reactor Design Activities

International Nuclear Information System (INIS)

2011-09-01

Over 120 nuclear regulatory and industry experts met in Paris on 15-16 September 2011 to discuss the accomplishments of the Multinational Design Evaluation Programme (MDEP) and the future of global nuclear safety. The conference comes at a challenging time following the Fukushima Daiichi nuclear accident. Participants at the Second MDEP Conference on New Reactor Design Activities included senior management from national regulatory authorities, new reactor vendors and licensees, industry groups and nuclear standards development organisations. Mr. Luis E. Echevarri, Director-General of the OECD Nuclear Energy Agency (NEA), which acts as the secretariat for the MDEP, outlined the progress accomplished since the programme was established five years ago as well as 'the concrete path to convergence in nuclear safety practices among regulators that this unique initiative is building'. Mr. Andre-Claude Lacoste, Chairman of the French Nuclear Safety Authority (Autorite de surete nucleaire, ASN) and MDEP Policy Group Chair, highlighted the benefits and added value that participation in the programme has brought to its members as well as to nuclear safety more generally. Participants discussed progress made by the MDEP design-specific working groups examining AREVA's EPR and Westinghouse's AP1000 designs, and the issue-specific working groups on digital instrumentation and control safety systems, mechanical codes and standards, and vendor inspection co-operation. Common positions have been produced on digital instrumentation and control safety systems as well as certain aspects of the EPR and AP1000 designs. The programme has also issued a vendor inspection protocol, which is made available to vendors subject to such inspections, and a review of The Structure and Application of High-level Safety Goals. Representatives from the World Nuclear Association's (WNA) working group on Cooperation in Reactor Design Evaluation and Licensing (CORDEL) led a discussion on industry

SIAM Conference on Geometric Design and Computing. Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

None

2002-03-11

The SIAM Conference on Geometric Design and Computing attracted 164 domestic and international researchers, from academia, industry, and government. It provided a stimulating forum in which to learn about the latest developments, to discuss exciting new research directions, and to forge stronger ties between theory and applications. Final Report

8th International Conference on Robotic, Vision, Signal Processing & Power Applications

CERN Document Server

Mustaffa, Mohd

2014-01-01

The proceeding is a collection of research papers presented, at the 8th International Conference on Robotics, Vision, Signal Processing and Power Applications (ROVISP 2013), by researchers, scientists, engineers, academicians as well as industrial professionals from all around the globe. The topics of interest are as follows but are not limited to: • Robotics, Control, Mechatronics and Automation • Vision, Image, and Signal Processing • Artificial Intelligence and Computer Applications • Electronic Design and Applications • Telecommunication Systems and Applications • Power System and Industrial Applications  

COSIMA B2B - sales automation for e-procurement

OpenAIRE

Döring, Sven

2004-01-01

COSIMA B2B - sales automation for e-procurement / W. Kießling, S. Fischer, S. Döring. - In: International Conference on E-Commerce Technology : Proceedings / IEEE International Conference on E-Commerce Technology, CEC 2004 : 6 - 9 July 2004, San Diego, California / ed. by Martin Bichler ... - Los Alamitos, Calif. [u.a.] : IEEE Computer Society, 2004. - S. 59-68

Design of Air Conditioning Automation for Patisserie Shopwindow

OpenAIRE

Kemal Tutuncu; Recai Ozcan

2013-01-01

Having done in this study, air-conditioning automation for patisserie shopwindow was designed. In the cooling sector it is quite important to cooling up the air temperature in the shopwindow within short time interval. Otherwise the patisseries inside of the shopwindow will be spoilt in a few days. Additionally the humidity is other important parameter for the patisseries kept in shopwindow. It must be raised up to desired level in a quite short time. Traditional patisser...

Automation Interface Design Development

Data.gov (United States)

National Aeronautics and Space Administration — Our research makes its contributions at two levels. At one level, we addressed the problems of interaction between humans and computers/automation in a particular...

Evidence Report, Risk of Inadequate Design of Human and Automation/Robotic Integration

Science.gov (United States)

Zumbado, Jennifer Rochlis; Billman, Dorrit; Feary, Mike; Green, Collin

2011-01-01

The success of future exploration missions depends, even more than today, on effective integration of humans and technology (automation and robotics). This will not emerge by chance, but by design. Both crew and ground personnel will need to do more demanding tasks in more difficult conditions, amplifying the costs of poor design and the benefits of good design. This report has looked at the importance of good design and the risks from poor design from several perspectives: 1) If the relevant functions needed for a mission are not identified, then designs of technology and its use by humans are unlikely to be effective: critical functions will be missing and irrelevant functions will mislead or drain attention. 2) If functions are not distributed effectively among the (multiple) participating humans and automation/robotic systems, later design choices can do little to repair this: additional unnecessary coordination work may be introduced, workload may be redistributed to create problems, limited human attentional resources may be wasted, and the capabilities of both humans and technology underused. 3) If the design does not promote accurate understanding of the capabilities of the technology, the operators will not use the technology effectively: the system may be switched off in conditions where it would be effective, or used for tasks or in contexts where its effectiveness may be very limited. 4) If an ineffective interaction design is implemented and put into use, a wide range of problems can ensue. Many involve lack of transparency into the system: operators may be unable or find it very difficult to determine a) the current state and changes of state of the automation or robot, b) the current state and changes in state of the system being controlled or acted on, and c) what actions by human or by system had what effects. 5) If the human interfaces for operation and control of robotic agents are not designed to accommodate the unique points of view and

Automated Design Framework for Synthetic Biology Exploiting Pareto Optimality.

Science.gov (United States)

Otero-Muras, Irene; Banga, Julio R

2017-07-21

In this work we consider Pareto optimality for automated design in synthetic biology. We present a generalized framework based on a mixed-integer dynamic optimization formulation that, given design specifications, allows the computation of Pareto optimal sets of designs, that is, the set of best trade-offs for the metrics of interest. We show how this framework can be used for (i) forward design, that is, finding the Pareto optimal set of synthetic designs for implementation, and (ii) reverse design, that is, analyzing and inferring motifs and/or design principles of gene regulatory networks from the Pareto set of optimal circuits. Finally, we illustrate the capabilities and performance of this framework considering four case studies. In the first problem we consider the forward design of an oscillator. In the remaining problems, we illustrate how to apply the reverse design approach to find motifs for stripe formation, rapid adaption, and fold-change detection, respectively.

5th International Conference on Design Computing and Cognition

CERN Document Server

2014-01-01

Design thinking, the label given to the acts of designing, has become a paradigmatic view that has transcended the discipline of design and is now widely used in business and elsewhere. As a consequence there is an increasing interest in design research. This is because of the realization that design is part of the wealth creation of a nation and needs to be better understood and taught. The continuing globalization of industry and trade has required nations to re-examine where their core contributions lie if not in production efficiency. Design is a precursor to manufacturing for physical objects and is the precursor to implementation for virtual objects. At the same time, the need for sustainable development requires the design of new products and processes, which feeds a movement towards design innovations and inventions. The papers in this volume are from the Fifth International Conference on Design Computing and Cognition (DCC’12) held at Texas A & M University, USA. They represent the state-of-th...

Design of a robotic automation system for transportation of goods in hospitals

DEFF Research Database (Denmark)

Özkil, Ali Gürcan; Sørensen, Torben; Fan, Zhun

2007-01-01

Hospitals face with heavy traffic of goods everyday, where transportation tasks are mainly carried by human. Analysis of the current situation of transportation in a typical hospital showed several transportation tasks are suitable for automation. This paper presents a system, consisting of a fleet...... of robot vehicles, automatic stations and smart containers for automation of transportation of goods in hospitals. Design of semi-autonomous robot vehicles, containers and stations are presented and the overall system architecture is described. Implementing such a system in an existing hospital showed...

Ninth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, volume 3

Energy Technology Data Exchange (ETDEWEB)

Soderquist, J.R.; Neri, L.M.; Bohon, H.L.

1992-09-01

This publication contains the proceedings of the Ninth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design held at Lake Tahoe, Nevada, during 4-7 Nov. 1991. Presentations were made in the following areas of composite structural design: perspectives in composites, design methodology, design applications, design criteria, supporting technology, damage tolerance, and manufacturing. Separate abstracts have been prepared for articles from this report.

XIV International Conference on Mathematical Programming

CERN Document Server

Pardalos, Panos; Rapcsák, Tamás

2001-01-01

This volume contains refereed papers based on the lectures presented at the XIV International Conference on Mathematical Programming held at Matrahaza, Hungary, between 27-31 March 1999. This conference was organized by the Laboratory of Operations Research and Deci­ sion Systems at the Computer and Automation Institute, Hungarian Academy of Sciences. The editors hope this volume will contribute to the theory and applications of mathematical programming. As a tradition of these events, the main purpose of the confer­ ence was to review and discuss recent advances and promising research trends concerning theory, algorithms and applications in different fields of Optimization Theory and related areas such as Convex Analysis, Complementarity Systems and Variational Inequalities. The conference is traditionally held in the Matra Mountains, and housed by the resort house of the Hungarian Academy of Sciences. This was the 14th event of the long lasting series of conferences started in 1973. The organizers wish to...

A Case Study of Reverse Engineering Integrated in an Automated Design Process

Science.gov (United States)

Pescaru, R.; Kyratsis, P.; Oancea, G.

2016-11-01

This paper presents a design methodology which automates the generation of curves extracted from the point clouds that have been obtained by digitizing the physical objects. The methodology is described on a product belonging to the industry of consumables, respectively a footwear type product that has a complex shape with many curves. The final result is the automated generation of wrapping curves, surfaces and solids according to the characteristics of the customer's foot, and to the preferences for the chosen model, which leads to the development of customized products.

Automated design evolution of stereochemically randomized protein foldamers

Science.gov (United States)

Ranbhor, Ranjit; Kumar, Anil; Patel, Kirti; Ramakrishnan, Vibin; Durani, Susheel

2018-05-01

Diversification of chain stereochemistry opens up the possibilities of an ‘in principle’ increase in the design space of proteins. This huge increase in the sequence and consequent structural variation is aimed at the generation of smart materials. To diversify protein structure stereochemically, we introduced L- and D-α-amino acids as the design alphabet. With a sequence design algorithm, we explored the usage of specific variables such as chirality and the sequence of this alphabet in independent steps. With molecular dynamics, we folded stereochemically diverse homopolypeptides and evaluated their ‘fitness’ for possible design as protein-like foldamers. We propose a fitness function to prune the most optimal fold among 1000 structures simulated with an automated repetitive simulated annealing molecular dynamics (AR-SAMD) approach. The highly scored poly-leucine fold with sequence lengths of 24 and 30 amino acids were later sequence-optimized using a Dead End Elimination cum Monte Carlo based optimization tool. This paper demonstrates a novel approach for the de novo design of protein-like foldamers.

An automated supernova search and the design strategy

International Nuclear Information System (INIS)

Colgate, S.A.

1987-01-01

The design considerations for an automated supernova search are reviewed. If supernova are to be found a week after explosion well before light maximum of both Types I and II, and if a rate of finding of 52 per year is justified, then one needs to keep roughly 5000 galaxies under surveillance out of a full set of 15,000 galaxies at ≅50 Mpc distance. For detection at 1% of Type I maximum light requires a 30-inch telescope, 10 photoelectrons per pixel threshold, a 128 x 128 pixel photodetector operating with a 3-second integration time, and 2 seconds to slew and settle ≅1 0 . A system designed to perform this function in real-time is described. 7 refs

Low cost automation

International Nuclear Information System (INIS)

1987-03-01

This book indicates method of building of automation plan, design of automation facilities, automation and CHIP process like basics of cutting, NC processing machine and CHIP handling, automation unit, such as drilling unit, tapping unit, boring unit, milling unit and slide unit, application of oil pressure on characteristics and basic oil pressure circuit, application of pneumatic, automation kinds and application of process, assembly, transportation, automatic machine and factory automation.

Formal Test Automation: The Conference Protocol with PHACT

NARCIS (Netherlands)

Heerink, A.W.; Ural, Hasan; Probert, Robert L.; Feenstra, J.; Tretmans, G.J.; von Bochmann, Gregor

2000-01-01

We discuss a case study of automatic test generation and test execution based on formal methods. The case is the Conference Protocol, a simple, chatbox-like protocol, for which (formal) specifications and multiple implementations are publicly available and which is also used in other case study

How the new optoelectronic design automation industry is taking advantage of preexisting EDA standards

Science.gov (United States)

Nesmith, Kevin A.; Carver, Susan

2014-05-01

With the advancements in design processes down to the sub 7nm levels, the Electronic Design Automation industry appears to be coming to an end of advancements, as the size of the silicon atom becomes the limiting factor. Or is it? The commercial viability of mass-producing silicon photonics is bringing about the Optoelectronic Design Automation (OEDA) industry. With the science of photonics in its infancy, adding these circuits to ever-increasing complex electronic designs, will allow for new generations of advancements. Learning from the past 50 years of the EDA industry's mistakes and missed opportunities, the photonics industry is starting with electronic standards and extending them to become photonically aware. Adapting the use of pre-existing standards into this relatively new industry will allow for easier integration into the present infrastructure and faster time to market.

Home Automation

OpenAIRE

Ahmed, Zeeshan

2010-01-01

In this paper I briefly discuss the importance of home automation system. Going in to the details I briefly present a real time designed and implemented software and hardware oriented house automation research project, capable of automating house's electricity and providing a security system to detect the presence of unexpected behavior.

3rd International Conference on Sustainable Design and Manufacturing

CERN Document Server

Howlett, Robert; Liu, Ying; Theobald, Peter

2016-01-01

This volumes consists of 59 peer-reviewed papers, presented at the International Conference on Sustainable Design and Manufacturing (SDM-16) held in Chania, Crete Greece in April 2016. Leading-edge research into sustainable design and manufacturing aims to enable the manufacturing industry to grow by adopting more advanced technologies, and at the same time improve its sustainability by reducing its environmental impact. SDM-16 covers a wide range of topics from sustainable product design and service innovation, sustainable process and technology for the manufacturing of sustainable products, sustainable manufacturing systems and enterprises, decision support for sustainability, and the study of societal impact of sustainability including research for circular economy. Application areas are wide and varied. The book will provide an excellent overview of the latest research and development in the area of Sustainable Design and Manufacturing.

Designing an Automated Assessment of Public Speaking Skills Using Multimodal Cues

Science.gov (United States)

Chen, Lei; Feng, Gary; Leong, Chee Wee; Joe, Jilliam; Kitchen, Christopher; Lee, Chong Min

2016-01-01

Traditional assessments of public speaking skills rely on human scoring. We report an initial study on the development of an automated scoring model for public speaking performances using multimodal technologies. Task design, rubric development, and human rating were conducted according to standards in educational assessment. An initial corpus of…

Automation of Test Cases for Web Applications : Automation of CRM Test Cases

OpenAIRE

Seyoum, Alazar

2012-01-01

The main theme of this project was to design a test automation framework for automating web related test cases. Automating test cases designed for testing a web interface provide a means of improving a software development process by shortening the testing phase in the software development life cycle. In this project an existing AutoTester framework and iMacros test automation tools were used. CRM Test Agent was developed to integrate AutoTester to iMacros and to enable the AutoTester,...

Design, Construction, Demonstration and Delivery of an Automated Narrow Gap Welding System.

Science.gov (United States)

1982-06-29

DESIGN, CONSTRUCTION, DEMONSTRATION AND DELIVERY OF WE DA4I &NARROW GAP CONTRACT NO. NOOGOO-81-C-E923 TO DAVID TAYLOR NAVAL RESEARCH AND DEVELOPMENT...the automated * Narrow Gap welding process, is the narrow (3/8 - inch), square-butt joint *design. This narrow joint greatly reduces the volume of weld...AD-i45 495 DESIGN CONSTRUCTION DEMONSTRATION AiND DELIVERY OF RN 1/j AUrOMATED NARROW GAP WELDING SYSTEMI() CRC AUTOMATIC WELDING CO HOUSTON TX 29

An architecture pattern for safety critical automated driving applications: Design and analysis

NARCIS (Netherlands)

Luo, Y.; Saberi, A.K.; Bijlsma, T.; Lukkien, J.J.; Brand, M. van den

2017-01-01

Introduction of automated driving increases complexity of automotive systems. As a result, architecture design becomes a major concern for ensuring non-functional requirements such as safety, and modifiability. In the ISO 26262 standard, architecture patterns are recommended for system development.

An architecture pattern for safety critical automated driving applications : design and analysis

NARCIS (Netherlands)

Luo, Y.; Khabbaz Saberi, A.; Bijlsma, T.; Lukkien, J.J.; van den Brand, M.G.J.

2017-01-01

Introduction of automated driving increases complexity of automotive systems. As a result, architecture design becomes a major concern for ensuring non-functional requirements such as safety, and modifiability. In the ISO 26262 standard, architecture patterns are recommended for system development.

2nd International Conference on Intelligent Computing and Applications

CERN Document Server

Dash, Subhransu; Das, Swagatam; Panigrahi, Bijaya

2017-01-01

Second International Conference on Intelligent Computing and Applications was the annual research conference aimed to bring together researchers around the world to exchange research results and address open issues in all aspects of Intelligent Computing and Applications. The main objective of the second edition of the conference for the scientists, scholars, engineers and students from the academia and the industry is to present ongoing research activities and hence to foster research relations between the Universities and the Industry. The theme of the conference unified the picture of contemporary intelligent computing techniques as an integral concept that highlights the trends in computational intelligence and bridges theoretical research concepts with applications. The conference covered vital issues ranging from intelligent computing, soft computing, and communication to machine learning, industrial automation, process technology and robotics. This conference also provided variety of opportunities for ...

Complex Systems Design & Management : Proceedings of the Third International Conference on Complex Systems Design & Management

CERN Document Server

Caseau, Yves; Krob, Daniel; Rauzy, Antoine

2013-01-01

This book contains all refereed papers that were accepted to the third edition of the « Complex Systems Design & Management » (CSD&M 2012) international conference that took place in Paris (France) from December 12-14, 2012. (Website: http://www.csdm2012.csdm.fr)  These proceedings cover the most recent trends in the emerging field of complex systems sciences & practices from an industrial and academic perspective, including the main industrial domains (transport, defense & security, electronics, energy & environment, e-services), scientific & technical topics (systems fundamentals, systems architecture& engineering, systems metrics & quality, systemic  tools) and system types (transportation systems, embedded systems, software & information systems, systems of systems, artificial ecosystems). The CSD&M 2012 conference is organized under the guidance of the CESAMES non-profit organization (http://www.cesames.net).

Automated Design and Analysis Tool for CEV Structural and TPS Components, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The innovation of the proposed effort is a unique automated process for the analysis, design, and sizing of CEV structures and TPS. This developed process will...

Ankle-Foot Orthosis Made by 3D Printing Technique and Automated Design Software

Directory of Open Access Journals (Sweden)

Yong Ho Cha

2017-01-01

Full Text Available We described 3D printing technique and automated design software and clinical results after the application of this AFO to a patient with a foot drop. After acquiring a 3D modelling file of a patient’s lower leg with peroneal neuropathy by a 3D scanner, we loaded this file on the automated orthosis software and created the “STL” file. The designed AFO was printed using a fused filament fabrication type 3D printer, and a mechanical stress test was performed. The patient alternated between the 3D-printed and conventional AFOs for 2 months. There was no crack or damage, and the shape and stiffness of the AFO did not change after the durability test. The gait speed increased after wearing the conventional AFO (56.5 cm/sec and 3D-printed AFO (56.5 cm/sec compared to that without an AFO (42.2 cm/sec. The patient was more satisfied with the 3D-printed AFO than the conventional AFO in terms of the weight and ease of use. The 3D-printed AFO exhibited similar functionality as the conventional AFO and considerably satisfied the patient in terms of the weight and ease of use. We suggest the possibility of the individualized AFO with 3D printing techniques and automated design software.

13th Forum for Specification and Design Languages (FDL) conference

CERN Document Server

Morawiec, Adam; System Specification and Design Languages : Selected Contributions from FDL 2010

2012-01-01

This book brings together a selection of the best papers from the thirteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in Southampton, UK in September 2010.  FDL is a well established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modelling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. Covers design verification, automatic synthesis and mechanized debug aids; Includes language-based modeling and design techniques for embedded systems; Covers design, modeling and verification of mixed physical domain and mixed signal systems that include significant analog parts in electrical and non-electrical domains; Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven E...

A Systems Approach to Information Technology (IT) Infrastructure Design for Utility Management Automation Systems

OpenAIRE

A. Fereidunian; H. Lesani; C. Lucas; M. Lehtonen; M. M. Nordman

2006-01-01

Almost all of electric utility companies are planning to improve their management automation system, in order to meet the changing requirements of new liberalized energy market and to benefit from the innovations in information and communication technology (ICT or IT). Architectural design of the utility management automation (UMA) systems for their IT-enabling requires proper selection of IT choices for UMA system, which leads to multi-criteria decision-makings (MCDM). In resp...

Ecological Automation Design, Extending Work Domain Analysis

NARCIS (Netherlands)

Amelink, M.H.J.

2010-01-01

In high–risk domains like aviation, medicine and nuclear power plant control, automation has enabled new capabilities, increased the economy of operation and has greatly contributed to safety. However, automation increases the number of couplings in a system, which can inadvertently lead to more

Three Experiments Examining the Use of Electroencephalogram,Event-Related Potentials, and Heart-Rate Variability for Real-Time Human-Centered Adaptive Automation Design

Science.gov (United States)

Prinzel, Lawrence J., III; Parasuraman, Raja; Freeman, Frederick G.; Scerbo, Mark W.; Mikulka, Peter J.; Pope, Alan T.

2003-01-01

Adaptive automation represents an advanced form of human-centered automation design. The approach to automation provides for real-time and model-based assessments of human-automation interaction, determines whether the human has entered into a hazardous state of awareness and then modulates the task environment to keep the operator in-the-loop , while maintaining an optimal state of task engagement and mental alertness. Because adaptive automation has not matured, numerous challenges remain, including what the criteria are, for determining when adaptive aiding and adaptive function allocation should take place. Human factors experts in the area have suggested a number of measures including the use of psychophysiology. This NASA Technical Paper reports on three experiments that examined the psychophysiological measures of event-related potentials, electroencephalogram, and heart-rate variability for real-time adaptive automation. The results of the experiments confirm the efficacy of these measures for use in both a developmental and operational role for adaptive automation design. The implications of these results and future directions for psychophysiology and human-centered automation design are discussed.

9th International Conference on Robotics, Vision, Signal Processing & Power Applications

CERN Document Server

Iqbal, Shahid; Teoh, Soo; Mustaffa, Mohd

2017-01-01

 The proceeding is a collection of research papers presented, at the 9th International Conference on Robotics, Vision, Signal Processing & Power Applications (ROVISP 2016), by researchers, scientists, engineers, academicians as well as industrial professionals from all around the globe to present their research results and development activities for oral or poster presentations. The topics of interest are as follows but are not limited to:   • Robotics, Control, Mechatronics and Automation • Vision, Image, and Signal Processing • Artificial Intelligence and Computer Applications • Electronic Design and Applications • Telecommunication Systems and Applications • Power System and Industrial Applications • Engineering Education.

Automated Technology for Verificiation and Analysis

DEFF Research Database (Denmark)

-of-the-art research on theoretical and practical aspects of automated analysis, verification, and synthesis. Among 74 research papers and 10 tool papers submitted to ATVA 2009, the Program Committee accepted 23 as regular papers and 3 as tool papers. In all, 33 experts from 17 countries worked hard to make sure......This volume contains the papers presented at the 7th International Symposium on Automated Technology for Verification and Analysis held during October 13-16 in Macao SAR, China. The primary objective of the ATVA conferences remains the same: to exchange and promote the latest advances of state...

DATA TRANSFER IN THE AUTOMATED SYSTEM OF PARALLEL DESIGN AND CONSTRUCTION

Directory of Open Access Journals (Sweden)

Volkov Andrey Anatol'evich

2012-12-01

Full Text Available This article covers data transfer processes in the automated system of parallel design and construction. The authors consider the structure of reports used by contractors and clients when large-scale projects are implemented. All necessary items of information are grouped into three levels, and each level is described by certain attributes. The authors drive a lot of attention to the integrated operational schedule as it is the main tool of project management. Some recommendations concerning the forms and the content of reports are presented. Integrated automation of all operations is a necessary condition for the successful implementation of the new concept. The technical aspect of the notion of parallel design and construction also includes the client-to-server infrastructure that brings together all process implemented by the parties involved into projects. This approach should be taken into consideration in the course of review of existing codes and standards to eliminate any inconsistency between the construction legislation and the practical experience of engineers involved into the process.

Model-driven design using IEC 61499 a synchronous approach for embedded and automation systems

CERN Document Server

Yoong, Li Hsien; Bhatti, Zeeshan E; Kuo, Matthew M Y

2015-01-01

This book describes a novel approach for the design of embedded systems and industrial automation systems, using a unified model-driven approach that is applicable in both domains.  The authors illustrate their methodology, using the IEC 61499 standard as the main vehicle for specification, verification, static timing analysis and automated code synthesis.  The well-known synchronous approach is used as the main vehicle for defining an unambiguous semantics that ensures determinism and deadlock freedom. The proposed approach also ensures very efficient implementations either on small-scale embedded devices or on industry-scale programmable automation controllers (PACs). It can be used for both centralized and distributed implementations. Significantly, the proposed approach can be used without the need for any run-time support. This approach, for the first time, blurs the gap between embedded systems and automation systems and can be applied in wide-ranging applications in automotive, robotics, and industri...

Proceedings of the International Conference on Information Systems Design and Intelligent Applications 2012

CERN Document Server

Avadhani, P; Abraham, Ajith

2012-01-01

This volume contains the papers presented at INDIA-2012: International conference on  Information system Design and Intelligent Applications held on January 5-7, 2012 in Vishakhapatnam, India. This conference was organized by Computer Society of India (CSI), Vishakhapatnam chapter well supported by Vishakhapatnam Steel, RINL, Govt of India. It contains 108 papers contributed by authors from six different countries across four continents. These research papers mainly focused on intelligent applications and various system design issues. The papers cover a wide range of topics of computer science and information technology discipline ranging from image processing, data base application, data mining, grid and cloud computing, bioinformatics among many others. The various intelligent tools like swarm intelligence, artificial intelligence, evolutionary algorithms, bio-inspired algorithms have been applied in different papers for solving various challenging IT related problems.

Automated Security Testing of Web Widget Interactions

NARCIS (Netherlands)

Bezemer, C.P.; Mesbah, A.; Van Deursen, A.

2009-01-01

This paper is a pre-print of: Cor-Paul Bezemer, Ali Mesbah, and Arie van Deursen. Automated Security Testing of Web Widget Interactions. In Proceedings of the 7th joint meeting of the European Software Engineering Conference and the ACM SIGSOFT Symposium on the Foundations of Software Engineering

10th International Conference Mechatronics

CERN Document Server

Jabloński, Ryszard

2014-01-01

Mechatronics, as the integrating framework of mechanical engineering, electrical engineering, computer technology, control engineering and automation forms a crucial part in the design, manufacture and maintenance of a wide range of engineering products and processes. The mechatronics itself changes rapidly in last decade, from original mixture of subfields into original approach in engineering as a technical discipline. The book you are holding is aimed to help the reader to orient in this evolving field of science and technology. „Mechatronics 2013: Recent Technological and Scientific Advances“ is the fourth volume following the previous editions in 2007, 2009 and 2011, providing the comprehensive and accessible coverage of advances in mechatronics presented on the 10th International Conference Mechatronics 2013, hosted this year at the Brno University of Technology, Czech Republic. The contributions, that passed the thorough review process, give an insight into current trends in research and developmen...

Co-creative design developments for accessibility and home automation

OpenAIRE

Taib, SM; De Coster, R; Sabri Tekantape, E

2017-01-01

The term “Home Automation” can be referred to a networked home, which provides electronically controlled security and convenience for its users. Home automation is also defined as the integration of home-based technology and services for a better quality of living (Quynh, et al., 2012). The main purpose of home automation technologies is to enhance home comfort for everyone through the automation of higher security, domestic tasks and easy communication. Home automation should be able to enha...

Automation in Warehouse Development

CERN Document Server

Verriet, Jacques

2012-01-01

The warehouses of the future will come in a variety of forms, but with a few common ingredients. Firstly, human operational handling of items in warehouses is increasingly being replaced by automated item handling. Extended warehouse automation counteracts the scarcity of human operators and supports the quality of picking processes. Secondly, the development of models to simulate and analyse warehouse designs and their components facilitates the challenging task of developing warehouses that take into account each customer’s individual requirements and logistic processes. Automation in Warehouse Development addresses both types of automation from the innovative perspective of applied science. In particular, it describes the outcomes of the Falcon project, a joint endeavour by a consortium of industrial and academic partners. The results include a model-based approach to automate warehouse control design, analysis models for warehouse design, concepts for robotic item handling and computer vision, and auton...

Performance Evaluation of a Software Engineering Tool for Automated Design of Cooling Systems in Injection Moulding

DEFF Research Database (Denmark)

Jauregui-Becker, Juan M.; Tosello, Guido; van Houten, Fred J.A.M.

2013-01-01

This paper presents a software tool for automating the design of cooling systems for injection moulding and a validation of its performance. Cooling system designs were automatically generated by the proposed software tool and by applying a best practice tool engineering design approach. The two...

CONFERENCE: Computers and accelerators

Energy Technology Data Exchange (ETDEWEB)

Anon.

1984-01-15

In September of last year a Conference on 'Computers in Accelerator Design and Operation' was held in West Berlin attracting some 160 specialists including many from outside Europe. It was a Europhysics Conference, organized by the Hahn-Meitner Institute with Roman Zelazny as Conference Chairman, postponed from an earlier intended venue in Warsaw. The aim was to bring together specialists in the fields of accelerator design, computer control and accelerator operation.

Factors to Consider When Implementing Automated Software Testing

Science.gov (United States)

2016-11-10

development and integration is a continuous process throughout the acquisition life cycle . Automated Software Testing can improve testing capabilities...requires a lab, conference room, or both, and whether it should be located in- house or an external facility. 2. Ensure space is adequate to support team

Iterative User Interface Design for Automated Sequential Organ Failure Assessment Score Calculator in Sepsis Detection.

Science.gov (United States)

Aakre, Christopher Ansel; Kitson, Jaben E; Li, Man; Herasevich, Vitaly

2017-05-18

The new sepsis definition has increased the need for frequent sequential organ failure assessment (SOFA) score recalculation and the clerical burden of information retrieval makes this score ideal for automated calculation. The aim of this study was to (1) estimate the clerical workload of manual SOFA score calculation through a time-motion analysis and (2) describe a user-centered design process for an electronic medical record (EMR) integrated, automated SOFA score calculator with subsequent usability evaluation study. First, we performed a time-motion analysis by recording time-to-task-completion for the manual calculation of 35 baseline and 35 current SOFA scores by 14 internal medicine residents over a 2-month period. Next, we used an agile development process to create a user interface for a previously developed automated SOFA score calculator. The final user interface usability was evaluated by clinician end users with the Computer Systems Usability Questionnaire. The overall mean (standard deviation, SD) time-to-complete manual SOFA score calculation time was 61.6 s (33). Among the 24% (12/50) usability survey respondents, our user-centered user interface design process resulted in >75% favorability of survey items in the domains of system usability, information quality, and interface quality. Early stakeholder engagement in our agile design process resulted in a user interface for an automated SOFA score calculator that reduced clinician workload and met clinicians' needs at the point of care. Emerging interoperable platforms may facilitate dissemination of similarly useful clinical score calculators and decision support algorithms as "apps." A user-centered design process and usability evaluation should be considered during creation of these tools. ©Christopher Ansel Aakre, Jaben E Kitson, Man Li, Vitaly Herasevich. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 18.05.2017.

2nd International Conference on Digital Enterprise Design and Management

CERN Document Server

Krob, Daniel; Lonjon, Antoine; Panetto, Hervé

2014-01-01

This book contains all refereed papers that were accepted to the second edition of the « Digital Enterprise Design & Management » (DED&M 2014) international conference that took place in Paris (France) from February 4 to February 5, 2014 . These proceedings cover the most recent trends in the emerging field of Digital Enterprise, both from an academic and a professional perspective. A special focus is put on digital uses, digital strategies, digital infrastructures and digital governance from an Enterprise Architecture point of view. The DED&M 2014 conference is organized under the guidance of the Center of Excellence on Systems Architecture, Management, Economy and Strategy  and benefits from the supports of both the Orange – Ecole Polytechnique – Télécom ParisTech “Innovation and Regulation” Chair and the Dassault Aviation – DCNS – DGA – Thales – Ecole Polytechnique – ENSTA ParisTech – Télécom ParisTech  “Complex Systems Engineering” Chair.  .

1st international conference on digital enterprise design and management

CERN Document Server

Krob, Daniel; Rowe, Frantz

2013-01-01

This book contains all refereed papers that were accepted to the first edition of the « Digital Enterprise Design & Management » (DED&M 2013) international conference that took place in Paris (France) from February 12 to February 13, 2013. (Website: http://www.dedm2013.dedm.fr/) These proceedings cover the most recent trends in the emerging field of Digital Enterprise, both from an academic and a professional perspective. A special focus is put on digital uses, digital strategies, digital infrastructures and digital governance from an Enterprise Architecture point of view. The DED&M 2013 conference is organized under the guidance of the CESAMES non profit organization (http://www.cesames.net/). and benefits from the support of the "Innovation and Regulation of Digital Services" Chair (Orange, Ecole Polytechnique and Telecom ParisTech) and of the "Complex Systems Engineering" Chair (Dassault Aviation - DCNS - DGA - Thales - Ecole Polytechnique - ENSTA ParisTech – Telecom ParisTech).

Applying machine learning to pattern analysis for automated in-design layout optimization

Science.gov (United States)

Cain, Jason P.; Fakhry, Moutaz; Pathak, Piyush; Sweis, Jason; Gennari, Frank; Lai, Ya-Chieh

2018-04-01

Building on previous work for cataloging unique topological patterns in an integrated circuit physical design, a new process is defined in which a risk scoring methodology is used to rank patterns based on manufacturing risk. Patterns with high risk are then mapped to functionally equivalent patterns with lower risk. The higher risk patterns are then replaced in the design with their lower risk equivalents. The pattern selection and replacement is fully automated and suitable for use for full-chip designs. Results from 14nm product designs show that the approach can identify and replace risk patterns with quantifiable positive impact on the risk score distribution after replacement.

European conference on nondestructive testing

Energy Technology Data Exchange (ETDEWEB)

Klyuev, V V

1985-01-01

Information on the 3-d European conference on nondestructive testing (NT) held in October, 1984 in Florence, is presented. Plenary reports were devoted to complex use of different NT methods, tendencies to NT automation and robotics, transition from defectoscopy to quality control, determination of phisico-mechanical properties of items using different control methods, formulation of unified international programs on professional training and qualification. Section reports cover the following directions: NT use in aviation and astronautics, construction, welding engineering, studying works of art; personnel training, economics, NT functioning, automation, calibration, standardization, quality control over metallic and nonmetallic objects. Some reports concerned nondestructive testing of items during their use. Attention is paied to radiographic testing and neutron radiography as well as to image processing. NT equipment was also discussed.

Innovative designs and technologies of nuclear power. IV International scientific and technical conference. Book of abstracts

International Nuclear Information System (INIS)

2016-01-01

IV International scientific and technical conference “Innovative designs and technologies of nuclear power” has been organized and is conducted by JSC NIKIET with support from Rosatom State Corporation, the International Atomic Energy Agency, the Russian Academy of Sciences and the Nuclear Society of Russia. The conference topics include: innovative designs of nuclear facilities for various applications, nuclear fuel and new materials, closed fuel cycle technologies, SNF and RW management, technological answers to nonproliferation problems, small power reactors (stationary, transportable, floatable, propulsion, space), integrated codes of a new generation for safety analysis of nuclear power plants and fuel cycles, controlled fusion [ru

Computer-aided design of microfluidic very large scale integration (mVLSI) biochips design automation, testing, and design-for-testability

CERN Document Server

Hu, Kai; Ho, Tsung-Yi

2017-01-01

This book provides a comprehensive overview of flow-based, microfluidic VLSI. The authors describe and solve in a comprehensive and holistic manner practical challenges such as control synthesis, wash optimization, design for testability, and diagnosis of modern flow-based microfluidic biochips. They introduce practical solutions, based on rigorous optimization and formal models. The technical contributions presented in this book will not only shorten the product development cycle, but also accelerate the adoption and further development of modern flow-based microfluidic biochips, by facilitating the full exploitation of design complexities that are possible with current fabrication techniques. Offers the first practical problem formulation for automated control-layer design in flow-based microfluidic biochips and provides a systematic approach for solving this problem; Introduces a wash-optimization method for cross-contamination removal; Presents a design-for-testability (DfT) technique that can achieve 100...

Third International Conference on Inverse Design Concepts and Optimization in Engineering Sciences (ICIDES-3)

Science.gov (United States)

Dulikravich, George S. (Editor)

1991-01-01

Papers from the Third International Conference on Inverse Design Concepts and Optimization in Engineering Sciences (ICIDES) are presented. The papers discuss current research in the general field of inverse, semi-inverse, and direct design and optimization in engineering sciences. The rapid growth of this relatively new field is due to the availability of faster and larger computing machines.

Lithography-based automation in the design of program defect masks

Science.gov (United States)

Vakanas, George P.; Munir, Saghir; Tejnil, Edita; Bald, Daniel J.; Nagpal, Rajesh

2004-05-01

In this work, we are reporting on a lithography-based methodology and automation in the design of Program Defect masks (PDM"s). Leading edge technology masks have ever-shrinking primary features and more pronounced model-based secondary features such as optical proximity corrections (OPC), sub-resolution assist features (SRAF"s) and phase-shifted mask (PSM) structures. In order to define defect disposition specifications for critical layers of a technology node, experience alone in deciding worst-case scenarios for the placement of program defects is necessary but may not be sufficient. MEEF calculations initiated from layout pattern data and their integration in a PDM layout flow provide a natural approach for improvements, relevance and accuracy in the placement of programmed defects. This methodology provides closed-loop feedback between layout and hard defect disposition specifications, thereby minimizing engineering test restarts, improving quality and reducing cost of high-end masks. Apart from SEMI and industry standards, best-known methods (BKM"s) in integrated lithographically-based layout methodologies and automation specific to PDM"s are scarce. The contribution of this paper lies in the implementation of Design-For-Test (DFT) principles to a synergistic interaction of CAD Layout and Aerial Image Simulator to drive layout improvements, highlight layout-to-fracture interactions and output accurate program defect placement coordinates to be used by tools in the mask shop.

Human-Automation Interaction Design for Adaptive Cruise Control Systems of Ground Vehicles

Directory of Open Access Journals (Sweden)

Hwisoo Eom

2015-06-01

Full Text Available A majority of recently developed advanced vehicles have been equipped with various automated driver assistance systems, such as adaptive cruise control (ACC and lane keeping assistance systems. ACC systems have several operational modes, and drivers can be unaware of the mode in which they are operating. Because mode confusion is a significant human error factor that contributes to traffic accidents, it is necessary to develop user interfaces for ACC systems that can reduce mode confusion. To meet this requirement, this paper presents a new human-automation interaction design methodology in which the compatibility of the machine and interface models is determined using the proposed criteria, and if the models are incompatible, one or both of the models is/are modified to make them compatible. To investigate the effectiveness of our methodology, we designed two new interfaces by separately modifying the machine model and the interface model and then performed driver-in-the-loop experiments. The results showed that modifying the machine model provides a more compact, acceptable, effective, and safe interface than modifying the interface model.

Human-Automation Interaction Design for Adaptive Cruise Control Systems of Ground Vehicles.

Science.gov (United States)

Eom, Hwisoo; Lee, Sang Hun

2015-06-12

A majority of recently developed advanced vehicles have been equipped with various automated driver assistance systems, such as adaptive cruise control (ACC) and lane keeping assistance systems. ACC systems have several operational modes, and drivers can be unaware of the mode in which they are operating. Because mode confusion is a significant human error factor that contributes to traffic accidents, it is necessary to develop user interfaces for ACC systems that can reduce mode confusion. To meet this requirement, this paper presents a new human-automation interaction design methodology in which the compatibility of the machine and interface models is determined using the proposed criteria, and if the models are incompatible, one or both of the models is/are modified to make them compatible. To investigate the effectiveness of our methodology, we designed two new interfaces by separately modifying the machine model and the interface model and then performed driver-in-the-loop experiments. The results showed that modifying the machine model provides a more compact, acceptable, effective, and safe interface than modifying the interface model.

Robotic Fabrication in Architecture, Art and Design 2016

CERN Document Server

Saunders, Rob; Burry, Jane

2016-01-01

The book presents the proceedings of Rob/Arch 2016, the third international conference on robotic fabrication in architecture, art, and design. The work contains a wide range of contemporary topics, from methodologies for incorporating dynamic material feedback into existing fabrication processes, to novel interfaces for robotic programming, to new processes for large-scale automated construction. The latent argument behind this research is that the term ‘file-to-factory’ must not be a reductive celebration of expediency but instead a perpetual challenge to increase the quality of feedback between design, matter, and making.

Analyzing Trends in Conference Design.

Science.gov (United States)

Draves, William A.

1985-01-01

Four major forces will provide the major influences on all adult learning in the next decade, and they affect conferences and meetings as well. The author discusses these four forces: friendly competition, appeals to the emotions, demands for quality, and increased research and development. (CT)

2nd International Conference on Recent Advances in Information Technology

CERN Document Server

Mukhopadhyay, Sushanta

2014-01-01

The book is based on the research papers presented in Second International Conference on Recent Advances in Information Technology (RAIT 2014), held at Indian School of Mines, Dhanbad, India. It provides the latest developments in the area of information technology and covers a variety of topics, including Advanced Algorithm Design and Analysis, Algorithmic Graph Theory, Artificial Intelligence, Bioinformatics, Circuit Design Automation, Computational Biology, Computational Mathematics, Cryptology, Data Compression, Database Management System, Data Mining, E-Applications, Embedded System, Information and Network Security, Information Retrieval, Internet Computing, etc. The objective is to familiarize the reader with the latest scientific developments that are taking place in various fields and the latest sophisticated problem solving tools that are being developed to deal with the complex and intricate problems that are otherwise difficult to solve by the usual and traditional methods.

DESIGN OF BUILDING AUTOMATION BASED ON PROFIBUS-DP NETWORK

Directory of Open Access Journals (Sweden)

Cemal YILMAZ

2006-02-01

Full Text Available In this study, a building automation has been designed by using the Profibus DP (Process Field Bus- Decentralized Periphery network. In the study; fire alarm, thief alarm, lighting, power, humidity and temperature control have been implemented. The data from building has been transmitted to the Profibus-DP network via control point located on the flats. The data taken from the building has been collected in the main control unit to achieve overall control of the system. The work has provided an optimum efficiency in energy consumption, control of power, security, temperature and humidity.

Proceedings of the third international conference on containment design and operation. v.1

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

The second international conference on containment design and operation included sessions on the following topics: performance and regulatory requirements; radionuclide behaviour; severe accident design and analysis; operation, maintenance, leaking and aging of containment systems; thermal hydraulic behaviour of containment systems; hydrogen mixing and mitigation; design methods and concepts; code validation; structural analysis and response tests; passive safety systems; aerosol behaviour; containment reliability, integrity, and risk assessment; hydrogen deflagration and detonation. Due prominence was given to CANDU and other PHWR reactors. The individual papers have been abstracted separately.

Proceedings of the third international conference on containment design and operation. v.1

International Nuclear Information System (INIS)

1994-01-01

The second international conference on containment design and operation included sessions on the following topics: performance and regulatory requirements; radionuclide behaviour; severe accident design and analysis; operation, maintenance, leaking and aging of containment systems; thermal hydraulic behaviour of containment systems; hydrogen mixing and mitigation; design methods and concepts; code validation; structural analysis and response tests; passive safety systems; aerosol behaviour; containment reliability, integrity, and risk assessment; hydrogen deflagration and detonation. Due prominence was given to CANDU and other PHWR reactors. The individual papers have been abstracted separately

AIRCRAFT POWER SUPPLY SYSTEM DESIGN PROCESS AS AN AUTOMATION OBJECT

Directory of Open Access Journals (Sweden)

Boris V. Zhmurov

2018-01-01

aircraft and take into account all the requirements of the customer and the regulatory and technical documentation is its automation.Automation of the design of EPS aircraft as an optimization task involves the formalization of the object of optimization, as well as the choice of the criterion of efficiency and control actions. Under the object of optimization in this case we mean the design process of the EPS, the formalization of which includes formalization and the design object – the aircraft power supply system.

Proceedings of the American power conference: Volume 61-1

International Nuclear Information System (INIS)

McBride, A.E.

1999-01-01

This is volume one of the proceedings of the American Power Conference of 1999. The topics of the papers include multi-skilled work forces for the next century; global climate change and mitigation; distributed generation prospects in an open market; US DOE--EPRI wind turbine verification program; operations and maintenance cost reduction strategies; surviving deregulation and competition; power markets risk management and trading; interconnected operations; commercializing reliability; utility automation; electrical impacts of facilities operation; training for the future; SOX/PM2.5/air toxic; turbine-generator plant advances; codes and standards -- competing globally; business opportunities; the changing regulatory environment; advanced fuel design and engineering analysis: mandate for competing under regulation; unit commitment and dispatch; strategies for the open market; outage management; distribution reliability; and NOX control

5th Computer Science On-line Conference

CERN Document Server

Senkerik, Roman; Oplatkova, Zuzana; Silhavy, Petr; Prokopova, Zdenka

2016-01-01

This volume is based on the research papers presented in the 5th Computer Science On-line Conference. The volume Artificial Intelligence Perspectives in Intelligent Systems presents modern trends and methods to real-world problems, and in particular, exploratory research that describes novel approaches in the field of artificial intelligence. New algorithms in a variety of fields are also presented. The Computer Science On-line Conference (CSOC 2016) is intended to provide an international forum for discussions on the latest research results in all areas related to Computer Science. The addressed topics are the theoretical aspects and applications of Computer Science, Artificial Intelligences, Cybernetics, Automation Control Theory and Software Engineering.

The Conversion of Cardiovascular Conference Abstracts to Publications

DEFF Research Database (Denmark)

Fosbøl, Emil L.; Fosbøl, Philip Loldrup; Harrington, Robert A.

2012-01-01

a systematic and automated evaluation of rates, timing, and correlates of publication from scientific abstracts presented at 3 major cardiovascular conferences. Methods and Results—Using an automated computer algorithm, we searched the ISI Web of Science to identify peer-reviewed publications of abstracts......–3, 2.5–5.8) for ESC (P for difference between groups 0.01). Clinical science and population science were less likely to be published compared with basic science. Conclusions—One third of abstracts were translated into publications by 2 years after presentation and less than one half by 5 years after...

Design and development on automated control system of coated fuel particle fabrication process

International Nuclear Information System (INIS)

Liu Malin; Shao Youlin; Liu Bing

2013-01-01

With the development trend of the large-scale production of the HTR coated fuel particles, the original manual control system can not meet the requirement and the automation control system of coated fuel particle fabrication in modern industrial grade is needed to develop. The comprehensive analysis aiming at successive 4-layer coating process of TRISO type coated fuel particles was carried out. It was found that the coating process could be divided into five subsystems and nine operating states. The establishment of DCS-type (distributed control system) of automation control system was proposed. According to the rigorous requirements of preparation process for coated particles, the design considerations of DCS were proposed, including the principle of coordinated control, safety and reliability, integration specification, practical and easy to use, and open and easy to update. A complete set of automation control system for coated fuel particle preparation process was manufactured based on fulfilling the requirements of these principles in manufacture practice. The automated control system was put into operation in the production of irradiated samples for HTRPM demonstration project. The experimental results prove that the system can achieve better control of coated fuel particle preparation process and meet the requirements of factory-scale production. (authors)

Automated Test Requirement Document Generation

Science.gov (United States)

1987-11-01

DIAGNOSTICS BASED ON THE PRINCIPLES OF ARTIFICIAL INTELIGENCE ", 1984 International Test Conference, 01Oct84, (A3, 3, Cs D3, E2, G2, H2, 13, J6, K) 425...j0O GLOSSARY OF ACRONYMS 0 ABBREVIATION DEFINITION AFSATCOM Air Force Satellite Communication Al Artificial Intelligence ASIC Application Specific...In-Test Equipment (BITE) and AI ( Artificial Intelligence) - Expert Systems - need to be fully applied before a completely automated process can be

National technical conference, 16th, Albuquerque, NM, October 9-11, 1984, Proceedings

International Nuclear Information System (INIS)

Anon.

1984-01-01

The present conference gives attention to the development status of materials technologies in such diverse fields as electronic hardware, advanced composite processing, materials repair methods, educational resources for materials science and engineering, robotic and automated industrial processes, radiation effects on materials, metal matrix composites, glass/ceramic systems, carbon/carbon refractory composites, and adhesive systems and joining methods. Also discussed are composite matrix chemical and mechanical properties, polymeric material developments, the testing of composite materials, and the inspection of composite structures. Emphasis is given to the prediction of composite systems performance, novel manufacturing methods, and advanced design and analysis techniques for composite structures in aerospace applications

Automated Integration of Dedicated Hardwired IP Cores in Heterogeneous MPSoCs Designed with ESPAM

Directory of Open Access Journals (Sweden)

Ed Deprettere

2008-06-01

Full Text Available This paper presents a methodology and techniques for automated integration of dedicated hardwired (HW IP cores into heterogeneous multiprocessor systems. We propose an IP core integration approach based on an HW module generation that consists of a wrapper around a predefined IP core. This approach has been implemented in a tool called ESPAM for automated multiprocessor system design, programming, and implementation. In order to keep high performance of the integrated IP cores, the structure of the IP core wrapper is devised in a way that adequately represents and efficiently implements the main characteristics of the formal model of computation, namely, Kahn process networks, we use as an underlying programming model in ESPAM. We present details about the structure of the HW module, the supported types of IP cores, and the minimum interfaces these IP cores have to provide in order to allow automated integration in heterogeneous multiprocessor systems generated by ESPAM. The ESPAM design flow, the multiprocessor platforms we consider, and the underlying programming (KPN model are introduced as well. Furthermore, we present the efficiency of our approach by applying our methodology and ESPAM tool to automatically generate, implement, and program heterogeneous multiprocessor systems that integrate dedicated IP cores and execute real-life applications.

Automated Design and Analysis Tool for CLV/CEV Composite and Metallic Structural Components, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The innovation of the proposed effort is a unique automated process for the analysis, design, and sizing of CLV/CEV composite and metallic structures. This developed...

Automated Robust Maneuver Design and Optimization

Data.gov (United States)

National Aeronautics and Space Administration — NASA is seeking improvements to the current technologies related to Position, Navigation and Timing. In particular, it is desired to automate precise maneuver...

Design and Implementation of a WiFi Based Home Automation System

OpenAIRE

Ahmed ElShafee; Karim Alaa Hamed

2012-01-01

This paper presents a design and prototype implementation of new home automation system that uses WiFi technology as a network infrastructure connecting its parts. The proposed system consists of two main components; the first part is the server (web server), which presents system core that manages, controls, and monitors users- home. Users and system administrator can locally (LAN) or remotely (internet) manage and control system code. Second part is hardware interface m...

FireProt: web server for automated design of thermostable proteins

Science.gov (United States)

Musil, Milos; Stourac, Jan; Brezovsky, Jan; Prokop, Zbynek; Zendulka, Jaroslav; Martinek, Tomas

2017-01-01

Abstract There is a continuous interest in increasing proteins stability to enhance their usability in numerous biomedical and biotechnological applications. A number of in silico tools for the prediction of the effect of mutations on protein stability have been developed recently. However, only single-point mutations with a small effect on protein stability are typically predicted with the existing tools and have to be followed by laborious protein expression, purification, and characterization. Here, we present FireProt, a web server for the automated design of multiple-point thermostable mutant proteins that combines structural and evolutionary information in its calculation core. FireProt utilizes sixteen tools and three protein engineering strategies for making reliable protein designs. The server is complemented with interactive, easy-to-use interface that allows users to directly analyze and optionally modify designed thermostable mutants. FireProt is freely available at http://loschmidt.chemi.muni.cz/fireprot. PMID:28449074

Fossil power plant automation

International Nuclear Information System (INIS)

Divakaruni, S.M.; Touchton, G.

1991-01-01

This paper elaborates on issues facing the utilities industry and seeks to address how new computer-based control and automation technologies resulting from recent microprocessor evolution, can improve fossil plant operations and maintenance. This in turn can assist utilities to emerge stronger from the challenges ahead. Many presentations at the first ISA/EPRI co-sponsored conference are targeted towards improving the use of computer and control systems in the fossil and nuclear power plants and we believe this to be the right forum to share our ideas

Research issues in the automated testing of Ajax applications

NARCIS (Netherlands)

Van Deursen, A.; Mesbah, A.

2009-01-01

Note: This paper is a pre-print of: Arie van Deursen and Ali Mesbah. Research Issues in the Automated Testing of Ajax Applications. In Proceedings 36th International Conference on Current Trend in Theory and Practice of Computer Science (SOFSEM), pp. 16-28. Lecture Notes in Computer Science 5901,

The European conference on nondestructive testing

International Nuclear Information System (INIS)

Klyuev, V.V.

1985-01-01

Information on the 3-d European conference on nondestructive testing (NT) held in October, 1984 in Florence, is presented. Plenary reports were devoted to complex use of different NT methods, tendencies to NT automation and robotics, transition from defectoscopy to quality control, determination of phisico-mechanical properties of items using different control methods, formulation of unified international programs on professional training and qualification. Section reports cover the following directions: NT use in aviation and astronautics, construction, welding engineering, studying works of art; personnel training, economics, NT functioning, automation, calibration, standardization, quality control over metallic and nonmetallic objects. Some reports concerned nondestructive testing of items during their use. Attention is paied to radiographic testing and neutron radiography as well as to image processing. NT equipment was also discussed

Design and Development of an Integrated Workstation Automation Hub

Energy Technology Data Exchange (ETDEWEB)

Weber, Andrew; Ghatikar, Girish; Sartor, Dale; Lanzisera, Steven

2015-03-30

Miscellaneous Electronic Loads (MELs) account for one third of all electricity consumption in U.S. commercial buildings, and are drivers for a significant energy use in India. Many of the MEL-specific plug-load devices are concentrated at workstations in offices. The use of intelligence, and integrated controls and communications at the workstation for an Office Automation Hub – offers the opportunity to improve both energy efficiency and occupant comfort, along with services for Smart Grid operations. Software and hardware solutions are available from a wide array of vendors for the different components, but an integrated system with interoperable communications is yet to be developed and deployed. In this study, we propose system- and component-level specifications for the Office Automation Hub, their functions, and a prioritized list for the design of a proof-of-concept system. Leveraging the strength of both the U.S. and India technology sectors, this specification serves as a guide for researchers and industry in both countries to support the development, testing, and evaluation of a prototype product. Further evaluation of such integrated technologies for performance and cost is necessary to identify the potential to reduce energy consumptions in MELs and to improve occupant comfort.

Conference summaries

International Nuclear Information System (INIS)

1986-01-01

This volume contains conference summaries of the international conference on radioactive waste management of the Canadian Nuclear Society. Topics of discussion include: storage and disposal; hydrogeology and geochemistry; transportation; buffers and backfill; public attitudes; tailings; site investigations and geomechanics; concrete; economics; licensing; matrix materials and container design; durability of fuel; biosphere modelling; radioactive waste processing; and, future options

2013 International Conference on Mechatronics and Automatic Control Systems

CERN Document Server

2014-01-01

This book examines mechatronics and automatic control systems. The book covers important emerging topics in signal processing, control theory, sensors, mechanic manufacturing systems and automation. The book presents papers from the 2013 International Conference on Mechatronics and Automatic Control Systems held in Hangzhou, China on August 10-11, 2013. .

Automated design of DC-excited flux-switching in-wheel motor using magnetic equivalent circuits

NARCIS (Netherlands)

Tang, Y.; Paulides, J.J.H.; Lomonova, E.A.

2015-01-01

DC-excited flux-switching motors (DCEFSMs) are increasingly considered as candidate traction motors for electric vehicles due to their robust and magnet-free structure with relatively high torque density and extendable speed range. In this paper, an automated design tool based on nonlinear magnetic

18th edition of the Forum on specification and Design Languages Conference

CERN Document Server

Wille, Robert

2016-01-01

This book brings together a selection of the best papers from the eighteenth edition of the Forum on specification and Design Languages Conference (FDL), which took place on September 14-16, 2015, in Barcelona, Spain. FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. Covers Assertion Based Design, Verification & Debug; Includes language-based modeling and design techniques for embedded systems; Covers design, modeling and verification of mixed physical domain and mixed signal systems that include significant analog parts in electrical and non-electrical domains; Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven Engineering...

17th edition of the Forum on specification and Design Languages Conference

CERN Document Server

Pasaje, Julio

2016-01-01

This book brings together a selection of the best papers from the seventeenth edition of the Forum on specification and Design Languages Conference (FDL), which took place on October 14-16, 2014, in Munich, Germany.  FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems.   •Covers Assertion Based Design, Verification & Debug; •Includes language-based modeling and design techniques for embedded systems; •Covers design, modeling and verification of mixed physical domain and mixed signal systems; •Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven Engineering (MDE); •Covers parallel architectures – both as platforms f...

Automated workflows for critical time-dependent calibrations at the CMS experiment.

CERN Document Server

Cerminara, Gianluca

2015-01-01

Fast and efficient methods for the calibration and the alignment ofthe detector are a key asset to exploit the physics potential of theCompact Muon Solenoid (CMS) detector and to ensure timely preparationof results for conferences and publications.To achieve this goal, the CMS experiment has set up a powerfulframework. This includes automated workflows in the context of a promptcalibration concept, which allows for a quick turnaround of thecalibration process following as fast as possible any change inrunning conditions.The presentation will review the design and operational experience ofthese workflows and the related monitoring system during the LHC RunIand focus on the development, deployment and commissioning in preparation of RunII.

Conferences as a Dramaturgical Learning Space

DEFF Research Database (Denmark)

Hansen, Nicoline Jacoby

Arguing that conferences are an important but under-researched and under-developed dimension of continuing education, the paper proposes a notion of conferences as a dramatic learning space. Using the design-based research methodology, a theoretical framework drawing on adult learning theories...... and dramaturgy is developed, consisting of four design principles: rhythm, reflection, involvement and interaction. These are sought implemented in a specific conference program, the case of the ECCI X conference, and the final program is explained and discussed....

IFLA General Conference, 1986. Bibliographic Control Division. Section: Cataloguing. Papers.

Science.gov (United States)

International Federation of Library Associations and Institutions, The Hague (Netherlands).

Papers on cataloging which were presented at the 1986 International Federation of Library Associations (IFLA) conference include: (1) "Cataloging of Government Documents in the Age of Automation" (Chong Y. Yoon, United States), which discusses the use of MARC (Machine-Readable Cataloging) formats to integrate government documents into…

An automation of design and modelling tasks in NX Siemens environment with original software - generator module

Science.gov (United States)

Zbiciak, M.; Grabowik, C.; Janik, W.

2015-11-01

Nowadays the design constructional process is almost exclusively aided with CAD/CAE/CAM systems. It is evaluated that nearly 80% of design activities have a routine nature. These design routine tasks are highly susceptible to automation. Design automation is usually made with API tools which allow building original software responsible for adding different engineering activities. In this paper the original software worked out in order to automate engineering tasks at the stage of a product geometrical shape design is presented. The elaborated software works exclusively in NX Siemens CAD/CAM/CAE environment and was prepared in Microsoft Visual Studio with application of the .NET technology and NX SNAP library. The software functionality allows designing and modelling of spur and helicoidal involute gears. Moreover, it is possible to estimate relative manufacturing costs. With the Generator module it is possible to design and model both standard and non-standard gear wheels. The main advantage of the model generated in such a way is its better representation of an involute curve in comparison to those which are drawn in specialized standard CAD systems tools. It comes from fact that usually in CAD systems an involute curve is drawn by 3 points that respond to points located on the addendum circle, the reference diameter of a gear and the base circle respectively. In the Generator module the involute curve is drawn by 11 involute points which are located on and upper the base and the addendum circles therefore 3D gear wheels models are highly accurate. Application of the Generator module makes the modelling process very rapid so that the gear wheel modelling time is reduced to several seconds. During the conducted research the analysis of differences between standard 3 points and 11 points involutes was made. The results and conclusions drawn upon analysis are shown in details.

Process understanding and cooperative design. Keys to high quality automation

International Nuclear Information System (INIS)

Tommila, T.; Heinonen, R.

1995-01-01

A systematic approach to the specification of process control systems, and four practical methods supporting user participation and interdisciplinary co-operation are described. The main steps of the design approach are: (1) hierarchical decomposition of the plant to process items of different types; (2) analysis and definition of requirements and control strategies associated with each process item; (3) definition of automation degree; and (4) functional specification of the control system and its user interface. The specification language used for this step is a combination of principles found in object oriented design, structured analysis as well as new language standards for programmable controllers and open information systems. The design review methods presented include structured control strategy meetings, safety analysis of sequential controls, review of graphic displays, and a usability questionnaire for existing plants. These methods can be used to elicit users' needs and operational experience, to gain a common understanding of the process functionality, or to detect errors in design specifications or in existing systems. (8 refs., 9 figs.)

The design of 3D scaffold for tissue engineering using automated scaffold design algorithm.

Science.gov (United States)

Mahmoud, Shahenda; Eldeib, Ayman; Samy, Sherif

2015-06-01

Several progresses have been introduced in the field of bone regenerative medicine. A new term tissue engineering (TE) was created. In TE, a highly porous artificial extracellular matrix or scaffold is required to accommodate cells and guide their growth in three dimensions. The design of scaffolds with desirable internal and external structure represents a challenge for TE. In this paper, we introduce a new method known as automated scaffold design (ASD) for designing a 3D scaffold with a minimum mismatches for its geometrical parameters. The method makes use of k-means clustering algorithm to separate the different tissues and hence decodes the defected bone portions. The segmented portions of different slices are registered to construct the 3D volume for the data. It also uses an isosurface rendering technique for 3D visualization of the scaffold and bones. It provides the ability to visualize the transplanted as well as the normal bone portions. The proposed system proves good performance in both the segmentation results and visualizations aspects.

PREFACE: International Conference on Advanced Structural and Functional Materials Design 2008

Science.gov (United States)

Kakeshita, Tomoyuki

2009-07-01

The Ministry of Education, Culture, Sports, Science and Technology of Japan started the Priority Assistance for the Formation of Worldwide Renowned Centers of Research - Global COE Program. This program is based on the competitive principle where a third party evaluation decides which program to support and to give priority support to the formation of world-class centers of research. Our program Center of Excellence for Advanced Structural and Functional Materials Design was selected as one of 13 programs in the field of Chemistry and Materials Science. This center is composed of two materials-related Departments in the Graduate School of Engineering: Materials and Manufacturing Science and Adaptive Machine Systems, and 4 Research Institutes: Center for Atomic and Molecular Technologies, Welding and Joining Research Institute, Institute of Scientific and Industrial Research and Research Center for Ultra-High Voltage Electron Microscopy. Recently, materials research, particularly that of metallic materials, has specialized only in individual elemental characteristics and narrow specialty fields, and there is a feeling that the original role of materials research has been forgotten. The 6 educational and research organizations which make up the COE program cooperatively try to develop new advanced structural and functional materials and achieve technological breakthrough for their fabrication processes from electronic, atomic, microstructural and morphological standpoints, focusing on their design and application: development of high performance structural materials such as space plane and turbine blades operating under a severe environment, new fabrication and assembling methods for electronic devices, development of evaluation technique for materials reliability, and development of new biomaterials for regeneration of biological hard tissues. The aim of this international conference was to report the scientific progress in our Global COE program and also to discuss

Understanding human management of automation errors

Science.gov (United States)

McBride, Sara E.; Rogers, Wendy A.; Fisk, Arthur D.

2013-01-01

Automation has the potential to aid humans with a diverse set of tasks and support overall system performance. Automated systems are not always reliable, and when automation errs, humans must engage in error management, which is the process of detecting, understanding, and correcting errors. However, this process of error management in the context of human-automation interaction is not well understood. Therefore, we conducted a systematic review of the variables that contribute to error management. We examined relevant research in human-automation interaction and human error to identify critical automation, person, task, and emergent variables. We propose a framework for management of automation errors to incorporate and build upon previous models. Further, our analysis highlights variables that may be addressed through design and training to positively influence error management. Additional efforts to understand the error management process will contribute to automation designed and implemented to support safe and effective system performance. PMID:25383042

Design considerations on user-interaction for semi-automated driving

NARCIS (Netherlands)

van den Beukel, Arie Paul; van der Voort, Mascha C.

2015-01-01

The automotive industry has recently made first steps towards implementation of automated driving, by introducing lateral control as addition to longitudinal control (i.e. ACC). This automated control is allowed during specific situations within existing infrastructure (e.g. motorway cruising).

An Automated System for Garment Texture Design Class Identification

Directory of Open Access Journals (Sweden)

Emon Kumar Dey

2015-09-01

Full Text Available Automatic identification of garment design class might play an important role in the garments and fashion industry. To achieve this, essential initial works are found in the literature. For example, construction of a garment database, automatic segmentation of garments from real life images, categorizing them into the type of garments such as shirts, jackets, tops, skirts, etc. It is now essential to find a system such that it will be possible to identify the particular design (printed, striped or single color of garment product for an automated system to recommend the garment trends. In this paper, we have focused on this specific issue and thus propose two new descriptors namely Completed CENTRIST (cCENTRIST and Ternary CENTRIST (tCENTRIST. To test these descriptors, we used two different publically available databases. The experimental results of these databases demonstrate that both cCENTRIST and tCENTRIST achieve nearly about 3% more accuracy than the existing state-of-the art methods.

Automation 2017

CERN Document Server

Zieliński, Cezary; Kaliczyńska, Małgorzata

2017-01-01

This book consists of papers presented at Automation 2017, an international conference held in Warsaw from March 15 to 17, 2017. It discusses research findings associated with the concepts behind INDUSTRY 4.0, with a focus on offering a better understanding of and promoting participation in the Fourth Industrial Revolution. Each chapter presents a detailed analysis of a specific technical problem, in most cases followed by a numerical analysis, simulation and description of the results of implementing the solution in a real-world context. The theoretical results, practical solutions and guidelines presented are valuable for both researchers working in the area of engineering sciences and practitioners looking for solutions to industrial problems. .

The design of an automated electrolytic enrichment apparatus for tritium

Energy Technology Data Exchange (ETDEWEB)

Myers, J.L.

1994-12-01

The Radiation Analytical Sciences Section at Laboratory at Lawrence Livermore National Laboratory performs analysis of low-level tritium concentrations in various natural water samples from the Tri-Valley Area, DOE Nevada Test Site, Site 300 in Tracy, CA, and other various places around the world. Low levels of tritium, a radioactive isotope of hydrogen, which is pre-concentrated in the RAS laboratory using an electrolytic enrichment apparatus. Later these enriched waters are analyzed by liquid scintillation counting to determine the activity of tritium. The enrichment procedure and the subsequent purification process by vacuum distillation are currently undertaken manually, hence being highly labor-intensive. The whole process typically takes about 2 to 3 weeks to complete a batch of 30 samples, with a dedicated personnel operating the process. The goal is to automate the entire process, specifically having the operation PC-LabVIEW{trademark} controlled with real-time monitoring capability. My involvement was in the design and fabrication of a prototypical automated electrolytic enrichment cell. Work will be done on optimizing the electrolytic process by assessing the different parameters of the enrichment procedure. Hardware and software development have also been an integral component of this project.

Proceedings of the third international conference on containment design and operation. v.2

International Nuclear Information System (INIS)

1994-01-01

The third international conference on containment design and operation includes in volume 2 of the publication sessions on the following topics: structural analysis and response tests; passive safety systems; aerosol behaviour; containment reliability, integrity, and risk assessment; hydrogen deflagration and detonation. Due prominence was given to CANDU and other PHWR reactors. The individual papers have been abstracted separately

Proceedings of the third international conference on containment design and operation. v.2

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

The third international conference on containment design and operation includes in volume 2 of the publication sessions on the following topics: structural analysis and response tests; passive safety systems; aerosol behaviour; containment reliability, integrity, and risk assessment; hydrogen deflagration and detonation. Due prominence was given to CANDU and other PHWR reactors. The individual papers have been abstracted separately.

MODEST: a web-based design tool for oligonucleotide-mediated genome engineering and recombineering

DEFF Research Database (Denmark)

Bonde, Mads; Klausen, Michael Schantz; Anderson, Mads Valdemar

2014-01-01

Recombineering and multiplex automated genome engineering (MAGE) offer the possibility to rapidly modify multiple genomic or plasmid sites at high efficiencies. This enables efficient creation of genetic variants including both single mutants with specifically targeted modifications as well......, which confers the corresponding genetic change, is performed manually. To address these challenges, we have developed the MAGE Oligo Design Tool (MODEST). This web-based tool allows designing of MAGE oligos for (i) tuning translation rates by modifying the ribosomal binding site, (ii) generating...

Proceedings of the 2. international conference on containment design and operation. Vol. 1,2

Energy Technology Data Exchange (ETDEWEB)

Lawrence, S R

1991-12-31

The second international conference on containment design and operation included sessions on the following topics: plenary; commissioning and operation; regulatory and performance requirements; reliability, risk and severe accident evaluation; future containment systems; severe accident evaluation; activity transport experiments; activity transport analysis; containment design; future and filtered vent containment systems; containment response; hydrogen combustion. Due prominence was given to CANDU and other PHWR reactors, and to Canadian experiments. The individual papers have been abstracted separately.

Conference summaries

International Nuclear Information System (INIS)

1988-01-01

This volume contains conference summaries of the 28. annual conference of the Canadian Nuclear Association, and the 9. annual conference of the Canadian Nuclear Society. Topics of discussion include: power reactors; fuel cycles; nuclear power and public understanding; future trends; applications of nuclear technology; CANDU reactors; operational enhancements; design of small reactors; accident behaviour in fuel channels; fuel storage and waste management; reactor commissioning/decommissioning; nuclear safety experiments and modelling; the next generation reactors; advances in nuclear engineering education in Canada; safety of small reactors; current position and improvements of fuel channels; current issues in nuclear safety; and radiation applications - medical and industrial

Adaptive Automation Based on Air Traffic Controller Decision-Making

NARCIS (Netherlands)

IJtsma (Student TU Delft), Martijn; Borst, C.; Mercado Velasco, G.A.; Mulder, M.; van Paassen, M.M.; Tsang, P.S.; Vidulich, M.A.

2017-01-01

Through smart scheduling and triggering of automation support, adaptive automation has the potential to balance air traffic controller workload. The challenge in the design of adaptive automation systems is to decide how and when the automation should provide support. This paper describes the design

User interface design principles for the SSM/PMAD automated power system

Science.gov (United States)

Jakstas, Laura M.; Myers, Chris J.

1991-01-01

Martin Marietta has developed a user interface for the space station module power management and distribution (SSM/PMAD) automated power system testbed which provides human access to the functionality of the power system, as well as exemplifying current techniques in user interface design. The testbed user interface was designed to enable an engineer to operate the system easily without having significant knowledge of computer systems, as well as provide an environment in which the engineer can monitor and interact with the SSM/PMAD system hardware. The design of the interface supports a global view of the most important data from the various hardware and software components, as well as enabling the user to obtain additional or more detailed data when needed. The components and representations of the SSM/PMAD testbed user interface are examined. An engineer's interactions with the system are also described.

Design of an automated solar concentrator for the pyrolysis of scrap rubber

International Nuclear Information System (INIS)

Zeaiter, Joseph; Ahmad, Mohammad N.; Rooney, David; Samneh, Bechara; Shammas, Elie

2015-01-01

Highlights: • Design of a solar concentrator with high focal-point temperatures. • Development of an automated continuous solar tracking system. • Catalytic pyrolysis to convert waste rubber tire to gas and liquid products. • The liquid components had high yields of C 10 –C 29 hydrocarbons. • The gaseous components were mainly propene and cyclobutene. - Abstract: An automated solar reactor system was designed and built to carry out catalytic pyrolysis of scrap rubber tires at 550 °C. To maximize solar energy concentration, a two degrees-of-freedom automated sun tracking system was developed and implemented. Both the azimuth and zenith angles were controlled via feedback from six photo-resistors positioned on a Fresnel lens. The pyrolysis of rubber tires was tested with the presence of two types of acidic catalysts, H-beta and H-USY. Additionally, a photoactive TiO 2 catalyst was used and the products were compared in terms of gas yields and composition. The catalysts were characterized by BET analysis and the pyrolysis gases and liquids were analyzed using GC–MS. The oil and gas yields were relatively high with the highest gas yield reaching 32.8% with H-beta catalyst while TiO 2 gave the same results as thermal pyrolysis without any catalyst. In the presence of zeolites, the dominant gasoline-like components in the gas were propene and cyclobutene. The TiO 2 and non-catalytic experiments produced a gas containing gasoline-like products of mainly isoprene (76.4% and 88.4% respectively). As for the liquids they were composed of numerous components spread over a wide distribution of C 10 to C 29 hydrocarbons of naphthalene and cyclohexane/ene derivatives

Proof-of-concept automation of propellant processing

Science.gov (United States)

Ramohalli, Kumar; Schallhorn, P. A.

1989-01-01

For space-based propellant production, automation of the process is needed. Currently, all phases of terrestrial production have some form of human interaction. A mixer was acquired to help perform the tasks of automation. A heating system to be used with the mixer was designed, built, and installed. Tests performed on the heating system verify design criteria. An IBM PS/2 personal computer was acquired for the future automation work. It is hoped that some the mixing process itself will be automated. This is a concept demonstration task; proving that propellant production can be automated reliably.

1st International Conference on Hydraulic Design in Water Resources Engineering : Channels and Channel Control Structures

CERN Document Server

1984-01-01

The development of water resources has proceeded at an amazing speed around the world in the last few decades. The hydraulic engineer has played his part: in constructing much larger artificial channels than ever before, larger and more sophisticated control structures, and systems of irrigation, drainage and water supply channels in which the flow by its nature is complex and unsteady requiring computer-based techniques at both the design and operation stage. It seemed appropriate to look briefly at some of the developments in hydraulic design resulting from this situation. Hence the idea of the Conference was formed. The Proceedings of the Conference show that hydraulic engineers have been able to acquire a very substantial base of design capability from the experience of the period referred to. The most outstanding development to have occurred is in the combination of physical and mathematical modelling, which in hydraulic engineering has followed a parallel path to that in other branches of engineering sc...

Facilitating Learning at Conferences

DEFF Research Database (Denmark)

Ravn, Ib; Elsborg, Steen

2011-01-01

The typical conference consists of a series of PowerPoint presentations that tend to render participants passive. Students of learning have long abandoned the transfer model that underlies such one-way communication. We propose an al-ternative theory of conferences that sees them as a forum...... for learning, mutual inspiration and human flourishing. We offer five design principles that specify how conferences may engage participants more and hence increase their learning. In the research-and-development effort reported here, our team collaborated with conference organizers in Denmark to introduce...... and facilitate a variety of simple learning techniques at thirty one- and two-day conferences of up to 300 participants each. We present ten of these techniques and data evaluating them. We conclude that if conference organizers allocate a fraction of the total conference time to facilitated processes...

2nd International Conference on Advanced Intelligent Systems and Informatics

CERN Document Server

Shaalan, Khaled; Gaber, Tarek; Azar, Ahmad; Tolba, M

2017-01-01

This book gathers the proceedings of the 2nd International Conference on Advanced Intelligent Systems and Informatics (AISI2016), which took place in Cairo, Egypt during October 24–26, 2016. This international interdisciplinary conference, which highlighted essential research and developments in the field of informatics and intelligent systems, was organized by the Scientific Research Group in Egypt (SRGE) and sponsored by the IEEE Computational Intelligence Society (Egypt chapter) and the IEEE Robotics and Automation Society (Egypt Chapter). The book’s content is divided into four main sections: Intelligent Language Processing, Intelligent Systems, Intelligent Robotics Systems, and Informatics.

International MultiConference of Engineers and Computer Scientists 2015

CERN Document Server

Ao, Sio-Iong; Huang, Xu; Castillo, Oscar

2016-01-01

This volume comprises selected extended papers written by prominent researchers participating in the International MultiConference of Engineers and Computer Scientists 2015, Hong Kong, 18-20 March 2015. The conference served as a platform for discussion of frontier topics in theoretical and applied engineering and computer science, and subjects covered include communications systems, control theory and automation, bioinformatics, artificial intelligence, data mining, engineering mathematics, scientific computing, engineering physics, electrical engineering, and industrial applications. The book describes the state-of-the-art in engineering technologies and computer science and its applications, and will serve as an excellent reference for industrial and academic researchers and graduate students working in these fields.

Design automation of ΔΣ switched capacitor modulators using spice and MATLAB

Directory of Open Access Journals (Sweden)

Mirković Dejan

2014-01-01

Full Text Available Concerning the fact that the design of contemporary integrated circuits (IC is practically impossible without using sophisticated Electronic Design Automation (EDA software, this paper gives some interesting thoughts and considerations about that issue. As technology processes advances on year basis consequently EDA industry is forced to follow this trend as well. This, on the other hand, requires IC designer to frequently and efficiently accommodate to new working environments. Authors of this paper suggest a method for high level circuit analysis that is based on using common (open source or low cost circuit simulators but precise and fast enough to meet requirements imposed by demanding mixed-signal blocks. The paper demonstrates the proposed EDA procedure on an example of second order ΔΣ modulator design. It illustrates considerable simulation time saving which is more than welcome in a world of analogue and mixed-signal design. [Projekat Ministarstva nauke Republike Srbije, br. TR32004: Advanced technologies for measurement, control, and communication on the electric grid

Process automation

International Nuclear Information System (INIS)

Moser, D.R.

1986-01-01

Process automation technology has been pursued in the chemical processing industries and to a very limited extent in nuclear fuel reprocessing. Its effective use has been restricted in the past by the lack of diverse and reliable process instrumentation and the unavailability of sophisticated software designed for process control. The Integrated Equipment Test (IET) facility was developed by the Consolidated Fuel Reprocessing Program (CFRP) in part to demonstrate new concepts for control of advanced nuclear fuel reprocessing plants. A demonstration of fuel reprocessing equipment automation using advanced instrumentation and a modern, microprocessor-based control system is nearing completion in the facility. This facility provides for the synergistic testing of all chemical process features of a prototypical fuel reprocessing plant that can be attained with unirradiated uranium-bearing feed materials. The unique equipment and mission of the IET facility make it an ideal test bed for automation studies. This effort will provide for the demonstration of the plant automation concept and for the development of techniques for similar applications in a full-scale plant. A set of preliminary recommendations for implementing process automation has been compiled. Some of these concepts are not generally recognized or accepted. The automation work now under way in the IET facility should be useful to others in helping avoid costly mistakes because of the underutilization or misapplication of process automation. 6 figs

Automated procedures for sizing aerospace vehicle structures /SAVES/

Science.gov (United States)

Giles, G. L.; Blackburn, C. L.; Dixon, S. C.

1972-01-01

Results from a continuing effort to develop automated methods for structural design are described. A system of computer programs presently under development called SAVES is intended to automate the preliminary structural design of a complete aerospace vehicle. Each step in the automated design process of the SAVES system of programs is discussed, with emphasis placed on use of automated routines for generation of finite-element models. The versatility of these routines is demonstrated by structural models generated for a space shuttle orbiter, an advanced technology transport,n hydrogen fueled Mach 3 transport. Illustrative numerical results are presented for the Mach 3 transport wing.

Procedure automation: the effect of automated procedure execution on situation awareness and human performance

International Nuclear Information System (INIS)

Andresen, Gisle; Svengren, Haakan; Heimdal, Jan O.; Nilsen, Svein; Hulsund, John-Einar; Bisio, Rossella; Debroise, Xavier

2004-04-01

As advised by the procedure workshop convened in Halden in 2000, the Halden Project conducted an experiment on the effect of automation of Computerised Procedure Systems (CPS) on situation awareness and human performance. The expected outcome of the study was to provide input for guidance on CPS design, and to support the Halden Project's ongoing research on human reliability analysis. The experiment was performed in HAMMLAB using the HAMBO BWR simulator and the COPMA-III CPS. Eight crews of operators from Forsmark 3 and Oskarshamn 3 participated. Three research questions were investigated: 1) Does procedure automation create Out-Of-The-Loop (OOTL) performance problems? 2) Does procedure automation affect situation awareness? 3) Does procedure automation affect crew performance? The independent variable, 'procedure configuration', had four levels: paper procedures, manual CPS, automation with breaks, and full automation. The results showed that the operators experienced OOTL problems in full automation, but that situation awareness and crew performance (response time) were not affected. One possible explanation for this is that the operators monitored the automated procedure execution conscientiously, something which may have prevented the OOTL problems from having negative effects on situation awareness and crew performance. In a debriefing session, the operators clearly expressed their dislike for the full automation condition, but that automation with breaks could be suitable for some tasks. The main reason why the operators did not like the full automation was that they did not feel being in control. A qualitative analysis addressing factors contributing to response time delays revealed that OOTL problems did not seem to cause delays, but that some delays could be explained by the operators having problems with the freeze function of the CPS. Also other factors such as teamwork and operator tendencies were of importance. Several design implications were drawn

Fifth SIAM conference on geometric design 97: Final program and abstracts. Final technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

The meeting was divided into the following sessions: (1) CAD/CAM; (2) Curve/Surface Design; (3) Geometric Algorithms; (4) Multiresolution Methods; (5) Robotics; (6) Solid Modeling; and (7) Visualization. This report contains the abstracts of papers presented at the meeting. Proceding the conference there was a short course entitled ``Wavelets for Geometric Modeling and Computer Graphics``.

Design and building of a homemade sample changer for automation of the irradiation in neutron activation analysis technique

International Nuclear Information System (INIS)

Gago, Javier; Hernandez, Yuri; Baltuano, Oscar; Bedregal, Patricia; Lopez, Yon; Urquizo, Rafael

2014-01-01

Because the RP-10 research reactor operates during weekends, it was necessary to design and build a sample changer for irradiation as part of the automation process of neutron activation analysis technique. The device is formed by an aluminum turntable disk which can accommodate 19 polyethylene capsules, containing samples to be sent using the pneumatic transfer system from the laboratory to the irradiation position. The system is operate by a control switchboard to send and return capsules in a variable preset time and by two different ways, allowing the determination of short, medium and long lived radionuclides. Also another mechanism is designed called 'exchange valve' for changing travel paths (pipelines) allowing the irradiated samples to be stored for a longer time in the reactor hall. The system design has allowed complete automation of this technique, enabling the irradiation of samples without the presence of an analyst. The design, construction and operation of the device is described and presented in this article. (authors).

Optimal Solution for VLSI Physical Design Automation Using Hybrid Genetic Algorithm

Directory of Open Access Journals (Sweden)

I. Hameem Shanavas

2014-01-01

Full Text Available In Optimization of VLSI Physical Design, area minimization and interconnect length minimization is an important objective in physical design automation of very large scale integration chips. The objective of minimizing the area and interconnect length would scale down the size of integrated chips. To meet the above objective, it is necessary to find an optimal solution for physical design components like partitioning, floorplanning, placement, and routing. This work helps to perform the optimization of the benchmark circuits with the above said components of physical design using hierarchical approach of evolutionary algorithms. The goal of minimizing the delay in partitioning, minimizing the silicon area in floorplanning, minimizing the layout area in placement, minimizing the wirelength in routing has indefinite influence on other criteria like power, clock, speed, cost, and so forth. Hybrid evolutionary algorithm is applied on each of its phases to achieve the objective. Because evolutionary algorithm that includes one or many local search steps within its evolutionary cycles to obtain the minimization of area and interconnect length. This approach combines a hierarchical design like genetic algorithm and simulated annealing to attain the objective. This hybrid approach can quickly produce optimal solutions for the popular benchmarks.

1st Iberian Robotics Conference

CERN Document Server

Sanfeliu, Alberto; Ferre, Manuel; ROBOT2013; Advances in robotics

2014-01-01

This book contains the proceedings of the ROBOT 2013: FIRST IBERIAN ROBOTICS CONFERENCE and it can be said that included both state of the art and more practical presentations dealing with implementation problems, support technologies and future applications. A growing interest in Assistive Robotics, Agricultural Robotics, Field Robotics, Grasping and Dexterous Manipulation, Humanoid Robots, Intelligent Systems and Robotics, Marine Robotics, has been demonstrated by the very relevant number of contributions. Moreover, ROBOT2013 incorporates a special session on Legal and Ethical Aspects in Robotics that is becoming a topic of key relevance. This Conference was held in Madrid (28-29 November 2013), organised by the Sociedad Española para la Investigación y Desarrollo en Robótica (SEIDROB) and by the Centre for Automation and Robotics - CAR (Universidad Politécnica de Madrid (UPM) and Consejo Superior de Investigaciones Científicas (CSIC)), along with the co-operation of Grupo Temático de Robótica CEA-GT...

Laboratory automation: trajectory, technology, and tactics.

Science.gov (United States)

Markin, R S; Whalen, S A

2000-05-01

Laboratory automation is in its infancy, following a path parallel to the development of laboratory information systems in the late 1970s and early 1980s. Changes on the horizon in healthcare and clinical laboratory service that affect the delivery of laboratory results include the increasing age of the population in North America, the implementation of the Balanced Budget Act (1997), and the creation of disease management companies. Major technology drivers include outcomes optimization and phenotypically targeted drugs. Constant cost pressures in the clinical laboratory have forced diagnostic manufacturers into less than optimal profitability states. Laboratory automation can be a tool for the improvement of laboratory services and may decrease costs. The key to improvement of laboratory services is implementation of the correct automation technology. The design of this technology should be driven by required functionality. Automation design issues should be centered on the understanding of the laboratory and its relationship to healthcare delivery and the business and operational processes in the clinical laboratory. Automation design philosophy has evolved from a hardware-based approach to a software-based approach. Process control software to support repeat testing, reflex testing, and transportation management, and overall computer-integrated manufacturing approaches to laboratory automation implementation are rapidly expanding areas. It is clear that hardware and software are functionally interdependent and that the interface between the laboratory automation system and the laboratory information system is a key component. The cost-effectiveness of automation solutions suggested by vendors, however, has been difficult to evaluate because the number of automation installations are few and the precision with which operational data have been collected to determine payback is suboptimal. The trend in automation has moved from total laboratory automation to a

Autonomy, Automation, and Systems

Science.gov (United States)

Turner, Philip R.

1987-02-01

Aerospace industry interest in autonomy and automation, given fresh impetus by the national goal of establishing a Space Station, is becoming a major item of research and technology development. The promise of new technology arising from research in Artificial Intelligence (AI) has focused much attention on its potential in autonomy and automation. These technologies can improve performance in autonomous control functions that involve planning, scheduling, and fault diagnosis of complex systems. There are, however, many aspects of system and subsystem design in an autonomous system that impact AI applications, but do not directly involve AI technology. Development of a system control architecture, establishment of an operating system within the design, providing command and sensory data collection features appropriate to automated operation, and the use of design analysis tools to support system engineering are specific examples of major design issues. Aspects such as these must also receive attention and technology development support if we are to implement complex autonomous systems within the realistic limitations of mass, power, cost, and available flight-qualified technology that are all-important to a flight project.

Development strategy and process models for phased automation of design and digital manufacturing electronics

Science.gov (United States)

Korshunov, G. I.; Petrushevskaya, A. A.; Lipatnikov, V. A.; Smirnova, M. S.

2018-03-01

The strategy of quality of electronics insurance is represented as most important. To provide quality, the processes sequence is considered and modeled by Markov chain. The improvement is distinguished by simple database means of design for manufacturing for future step-by-step development. Phased automation of design and digital manufacturing electronics is supposed. The MatLab modelling results showed effectiveness increase. New tools and software should be more effective. The primary digital model is proposed to represent product in the processes sequence from several processes till the whole life circle.

High performance integer arithmetic circuit design on FPGA architecture, implementation and design automation

CERN Document Server

Palchaudhuri, Ayan

2016-01-01

This book describes the optimized implementations of several arithmetic datapath, controlpath and pseudorandom sequence generator circuits for realization of high performance arithmetic circuits targeted towards a specific family of the high-end Field Programmable Gate Arrays (FPGAs). It explores regular, modular, cascadable, and bit-sliced architectures of these circuits, by directly instantiating the target FPGA-specific primitives in the HDL. Every proposed architecture is justified with detailed mathematical analyses. Simultaneously, constrained placement of the circuit building blocks is performed, by placing the logically related hardware primitives in close proximity to one another by supplying relevant placement constraints in the Xilinx proprietary “User Constraints File”. The book covers the implementation of a GUI-based CAD tool named FlexiCore integrated with the Xilinx Integrated Software Environment (ISE) for design automation of platform-specific high-performance arithmetic circuits from us...

Automated design and optimization of flexible booster autopilots via linear programming, volume 1

Science.gov (United States)

Hauser, F. D.

1972-01-01

A nonlinear programming technique was developed for the automated design and optimization of autopilots for large flexible launch vehicles. This technique, which resulted in the COEBRA program, uses the iterative application of linear programming. The method deals directly with the three main requirements of booster autopilot design: to provide (1) good response to guidance commands; (2) response to external disturbances (e.g. wind) to minimize structural bending moment loads and trajectory dispersions; and (3) stability with specified tolerances on the vehicle and flight control system parameters. The method is applicable to very high order systems (30th and greater per flight condition). Examples are provided that demonstrate the successful application of the employed algorithm to the design of autopilots for both single and multiple flight conditions.

Automated Test Case Generation for an Autopilot Requirement Prototype

Science.gov (United States)

Giannakopoulou, Dimitra; Rungta, Neha; Feary, Michael

2011-01-01

Designing safety-critical automation with robust human interaction is a difficult task that is susceptible to a number of known Human-Automation Interaction (HAI) vulnerabilities. It is therefore essential to develop automated tools that provide support both in the design and rapid evaluation of such automation. The Automation Design and Evaluation Prototyping Toolset (ADEPT) enables the rapid development of an executable specification for automation behavior and user interaction. ADEPT supports a number of analysis capabilities, thus enabling the detection of HAI vulnerabilities early in the design process, when modifications are less costly. In this paper, we advocate the introduction of a new capability to model-based prototyping tools such as ADEPT. The new capability is based on symbolic execution that allows us to automatically generate quality test suites based on the system design. Symbolic execution is used to generate both user input and test oracles user input drives the testing of the system implementation, and test oracles ensure that the system behaves as designed. We present early results in the context of a component in the Autopilot system modeled in ADEPT, and discuss the challenges of test case generation in the HAI domain.

Design and Achievement of User Interface Automation Testing of Linux Based on Element Tree of DogTail

Directory of Open Access Journals (Sweden)

Yuan Wen-Chao

2017-01-01

Full Text Available As Linux gets more popular around the world, the advantage of the open source on software makes people do automated UI test by unified testing framework. UI software testing can guarantee the rationality of User Interface of Linux and accuracy of the UI’s widgets. In order to set free from fuzzy and repeated manual testing, and improve efficiency, this paper achieves automation testing of UI under Linux, and proposes a method to identify and test UI widgets under Linux, which is according to element tree of DogTail automaton testing framework. It achieves automation test of UI under Linux. According to this method, Aiming at the product of Red Hat Subscription Manager under Red Hat Enterprise Linux, it designs the automation test plan of this series of product’s dialogs. After many tests, it is indicated that this plan can identify UI widgets accurately and rationally, describe the structure of software clearly, avoid software errors and improve efficiency of the software. Simultaneously, it also can be used in the internationalization testing for checking translation during software internationalization.

Advanced Microsystems for Automotive Applications 2015 : Smart Systems for Green and Automated Driving

CERN Document Server

Müller, Beate; Meyer, Gereon

2016-01-01

This edited volume presents the proceedings of the AMAA 2015 conference, Berlin, Germany. The topical focus of the 2015 conference lies on smart systems for green and automated driving. The automobile of the future has to respond to two major trends, the electrification of the drivetrain, and the automation of the transportation system. These trends will not only lead to greener and safer driving but re-define the concept of the car completely, particularly if they interact with each other in a synergetic way as for autonomous parking and charging, self-driving shuttles or mobile robots. Key functionalities like environment perception are enabled by electronic components and systems, sensors and actuators, communication nodes, cognitive systems and smart systems integration. The book will be a valuable read for research experts and professionals in the automotive industry but the book may also be beneficial for graduate students.

Automated cloning methods.; TOPICAL

International Nuclear Information System (INIS)

Collart, F.

2001-01-01

Argonne has developed a series of automated protocols to generate bacterial expression clones by using a robotic system designed to be used in procedures associated with molecular biology. The system provides plate storage, temperature control from 4 to 37 C at various locations, and Biomek and Multimek pipetting stations. The automated system consists of a robot that transports sources from the active station on the automation system. Protocols for the automated generation of bacterial expression clones can be grouped into three categories (Figure 1). Fragment generation protocols are initiated on day one of the expression cloning procedure and encompass those protocols involved in generating purified coding region (PCR)

The 9. European nuclear conference; La 9. conference nucleaire europeenne

Energy Technology Data Exchange (ETDEWEB)

Maurel, V.; Lewis, D.; Smirnov, V.P.; Gutierrez, J.E.; Paulin, Ph.; Markov, D.V.; Smirnov, A.V.; Polenok, V.S.; Horhoianu, G.; Olteanu, G.; Van der Schaaf, B.; Gavillet, D.; Lapena, J.; Ohms, C.; Roth, A.; Van Dyck, St.; Mardon, J.P.; Thomas, A.; Cipiere, M.F.; Faidy, C.; Hedin, F.; Delnondedieu, M.; Chassignole, B.; Doudet, L.; Dupond, O.; Kang, K.; Park, K.; Kim, K.; Ha, J.; Hoon-Seok, Jung; Yong-koo, Lee; Kwang-Ho, Kim; Seungwoo, Paek; Heui-Joo, Choi; Do-Hee, Ahn; Kwang-Rag, Kim; Minsoo, Lee; Sung-Paal, Yim; Hongsuk, Chung; Detroux, P.; Meessen, O.; Defloor, J.; Lars-Erik, Holm; Barescut, J.C.; Vacquier, B.; Laurier, D.; Caer, S.; Quesne, B.; Oudalova, A.; Geras' kin, St.; Dikarev, V.; Dikareva, N.; Chernonog, E.; Yang-Geun, Chung; Gab-Bock, Lee; Sun-Young, Bang; Yong-Sun, Lee; Bolognese-Milsztajn, T.; Frank, D.; Lacoste, V.; Pihet, P.; Lacronique, J.F.; Chauliac, C.; Verwaerde, D.; Pavageau, O.; Zaetta, A.; Varaine, F.; Warin, D.; Hudelot, J.P.; Bioux, Ph.; Klann, R.; Petruzzi, A.; D' auria, F.; Yung Kwon, Jin; Chul Jin, Chol; Mihalache, M.; Radu, V.; Pavelescu, M.; Schneidesch, Ch.R.; Jinzhao, Zhang; Dalleur, J.P.; Nuttin, A.; Meplan, O.; Wilson, J.; Perdu, F.; Campioni, G.; Mounier, C.; Sigrist, J.F.; Laine, Ch.; Broc, D.; Robbe, M.F.; Cariou, Y.; Seok-Kyun, Yoon; Win, Naing; Myung-Hyun, Kim; Kyung, Hee; Fridman, E.; Shwageraus, E.; Galperin, A.; Meplan, O.; Laulan, O.; Mechel-Sendis, F.; Belgaid, M.; Kadem, F.; Amokrane, A.; Hamidouche, T.; El-Khider, Si-Ahmed

2005-11-15

This issue gathers the abstracts of the papers presented at the ninth European nuclear conference (ENC-2005). The main part of the conference is split into 20 sessions. These sessions cover all technical aspects of nuclear power, from reactor design to waste management, without forgetting experimental and research reactors, reactor dismantling, economy, resources, safety, radioprotection and education issues. Perspectives of a nuclear renaissance are clearly visible in the world. This renaissance, mainly due to political, economical, societal and ecological factors, is fuelled by scientific and technical progress. This conference was the opportunity to present together these aspects of nuclear power and to analyze their mutual interactions.

Multiphysics Modelling and Simulation for Systems Design Conference

CERN Document Server

Abbes, Mohamed; Choley, Jean-Yves; Boukharouba, Taoufik; Elnady, Tamer; Kanaev, Andrei; Amar, Mounir; Chaari, Fakher

2015-01-01

This book reports on the state of the art in the field of multiphysics systems. It consists of accurately reviewed contributions to the MMSSD’2014 conference, which was held from December 17 to 19, 2004 in Hammamet, Tunisia. The different chapters, covering new theories, methods and a number of case studies, provide readers with an up-to-date picture of multiphysics modeling and simulation. They highlight the role played by high-performance computing and newly available software in promoting the study of multiphysics coupling effects, and show how these technologies can be practically implemented to bring about significant improvements in the field of design, control and monitoring of machines.  In addition to providing a detailed description of the methods and their applications, the book also identifies new research issues, challenges and opportunities, thus providing researchers and practitioners with both technical information to support their daily work and a new source of inspiration for their future...

Automated Work Package: Conceptual Design and Data Architecture

Energy Technology Data Exchange (ETDEWEB)

Al Rashdan, Ahmad [Idaho National Lab. (INL), Idaho Falls, ID (United States); Oxstrand, Johanna [Idaho National Lab. (INL), Idaho Falls, ID (United States); Agarwal, Vivek [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-05-26

The automated work package (AWP) is one of the U.S. Department of Energy’s (DOE) Light Water Reactor Sustainability Program efforts to enhance the safety and economics of the nuclear power industry. An AWP is an adaptive and interactive work package that intelligently drives the work process according to the plant condition, resources status, and users progress. The AWP aims to automate several manual tasks of the work process to enhance human performance and reduce human errors. Electronic work packages (eWPs), studied by the Electric Power Research Institute (EPRI), are work packages that rely to various extent on electronic data processing and presentation. AWPs are the future of eWPs. They are envisioned to incorporate the advanced technologies of the future, and thus address the unresolved deficiencies associated with the eWPs in a nuclear power plant. In order to define the AWP, it is necessary to develop an ideal envisioned scenario of the future work process without any current technology restriction. The approach followed to develop this scenario is specific to every stage of the work process execution. The scenario development resulted in fifty advanced functionalities that can be part of the AWP. To rank the importance of these functionalities, a survey was conducted involving several U.S. nuclear utilities. The survey aimed at determining the current need of the nuclear industry with respect to the current work process, i.e. what the industry is satisfied with, and where the industry envisions potential for improvement. The survey evaluated the most promising functionalities resulting from the scenario development. The results demonstrated a significant desire to adopt the majority of these functionalities. The results of the survey are expected to drive the Idaho National Laboratory (INL) AWP research and development (R&D). In order to facilitate this mission, a prototype AWP is needed. Since the vast majority of earlier efforts focused on the

Automated Work Package: Conceptual Design and Data Architecture

International Nuclear Information System (INIS)

Al Rashdan, Ahmad; Oxstrand, Johanna; Agarwal, Vivek

2016-01-01

The automated work package (AWP) is one of the U.S. Department of Energy's (DOE) Light Water Reactor Sustainability Program efforts to enhance the safety and economics of the nuclear power industry. An AWP is an adaptive and interactive work package that intelligently drives the work process according to the plant condition, resources status, and users progress. The AWP aims to automate several manual tasks of the work process to enhance human performance and reduce human errors. Electronic work packages (eWPs), studied by the Electric Power Research Institute (EPRI), are work packages that rely to various extent on electronic data processing and presentation. AWPs are the future of eWPs. They are envisioned to incorporate the advanced technologies of the future, and thus address the unresolved deficiencies associated with the eWPs in a nuclear power plant. In order to define the AWP, it is necessary to develop an ideal envisioned scenario of the future work process without any current technology restriction. The approach followed to develop this scenario is specific to every stage of the work process execution. The scenario development resulted in fifty advanced functionalities that can be part of the AWP. To rank the importance of these functionalities, a survey was conducted involving several U.S. nuclear utilities. The survey aimed at determining the current need of the nuclear industry with respect to the current work process, i.e. what the industry is satisfied with, and where the industry envisions potential for improvement. The survey evaluated the most promising functionalities resulting from the scenario development. The results demonstrated a significant desire to adopt the majority of these functionalities. The results of the survey are expected to drive the Idaho National Laboratory (INL) AWP research and development (R&D). In order to facilitate this mission, a prototype AWP is needed. Since the vast majority of earlier efforts focused on the frontend

16th International Conference on Intelligent Systems Design and Applications

CERN Document Server

Abraham, Ajith; Gamboa, Dorabela; Novais, Paulo

2017-01-01

This book comprises selected papers from the 16th International Conference on Intelligent Systems Design and Applications (ISDA’16), which was held in Porto, Portugal from December 1 to16, 2016. ISDA 2016 was jointly organized by the Portugual-based Instituto Superior de Engenharia do Porto and the US-based Machine Intelligence Research Labs (MIR Labs) to serve as a forum for the dissemination of state-of-the-art research and development of intelligent systems, intelligent technologies, and applications. The papers included address a wide variety of themes ranging from theories to applications of intelligent systems and computational intelligence area and provide a valuable resource for students and researchers in academia and industry alike. .

Space station automation study: Automation requirements derived from space manufacturing concepts. Volume 1: Executive summary

Science.gov (United States)

1984-01-01

The electroepitaxial process and the Very Large Scale Integration (VLSI) circuits (chips) facilities were chosen because each requires a very high degree of automation, and therefore involved extensive use of teleoperators, robotics, process mechanization, and artificial intelligence. Both cover a raw materials process and a sophisticated multi-step process and are therfore highly representative of the kinds of difficult operation, maintenance, and repair challenges which can be expected for any type of space manufacturing facility. Generic areas were identified which will require significant further study. The initial design will be based on terrestrial state-of-the-art hard automation. One hundred candidate missions were evaluated on the basis of automation portential and availability of meaning ful knowldege. The design requirements and unconstrained design concepts developed for the two missions are presented.

A Multi-Agent-Based Intelligent Sensor and Actuator Network Design for Smart House and Home Automation

Directory of Open Access Journals (Sweden)

Fei Hu

2013-08-01

Full Text Available The smart-house technology aims to increase home automation and security with reduced energy consumption. A smart house consists of various intelligent sensors and actuators operating on different platforms with conflicting objectives. This paper proposes a multi-agent system (MAS design framework to achieve smart house automation. The novelties of this work include the developments of (1 belief, desire and intention (BDI agent behavior models; (2 a regulation policy-based multi-agent collaboration mechanism; and (3 a set of metrics for MAS performance evaluation. Simulations of case studies are performed using the Java Agent Development Environment (JADE to demonstrate the advantages of the proposed method.

2nd International Conference on INformation Systems Design and Intelligent Applications

CERN Document Server

Satapathy, Suresh; Sanyal, Manas; Sarkar, Partha; Mukhopadhyay, Anirban

2015-01-01

The second international conference on INformation Systems Design and Intelligent Applications (INDIA – 2015) held in Kalyani, India during January 8-9, 2015. The book covers all aspects of information system design, computer science and technology, general sciences, and educational research. Upon a double blind review process, a number of high quality papers are selected and collected in the book, which is composed of two different volumes, and covers a variety of topics, including natural language processing, artificial intelligence, security and privacy, communications, wireless and sensor networks, microelectronics, circuit and systems, machine learning, soft computing, mobile computing and applications, cloud computing, software engineering, graphics and image processing, rural engineering, e-commerce, e-governance, business computing, molecular computing, nano computing, chemical computing, intelligent computing for GIS and remote sensing, bio-informatics and bio-computing. These fields are not only ...

3rd International Conference on INformation Systems Design and Intelligent Applications

CERN Document Server

Mandal, Jyotsna; Udgata, Siba; Bhateja, Vikrant

2016-01-01

The third international conference on INformation Systems Design and Intelligent Applications (INDIA – 2016) held in Visakhapatnam, India during January 8-9, 2016. The book covers all aspects of information system design, computer science and technology, general sciences, and educational research. Upon a double blind review process, a number of high quality papers are selected and collected in the book, which is composed of three different volumes, and covers a variety of topics, including natural language processing, artificial intelligence, security and privacy, communications, wireless and sensor networks, microelectronics, circuit and systems, machine learning, soft computing, mobile computing and applications, cloud computing, software engineering, graphics and image processing, rural engineering, e-commerce, e-governance, business computing, molecular computing, nano-computing, chemical computing, intelligent computing for GIS and remote sensing, bio-informatics and bio-computing. These fields are not...

Creating Learning at Conferences Through Participant Involvement

DEFF Research Database (Denmark)

Ravn, Ib; Elsborg, Steen

as a forum for learning, mutual inspiration and "human co-flourishing." We offer five design principles that specify how conferences may involve participants more and hence increase their learning. In the research and development effort reported here, our team collaborated with conference organizers......The typical conference is brimming with PowerPoint presentations that leave very little time for participant involvement. Students of learning have long abandoned the transfer model that underlies this massive show of one-way communication. We propose an alternative theory of the conference...... in Denmark to introduce a variety of simple learning techniques related to the design principles at thirty real conferences of some 100-200 participants each. We present twelve of these techniques and the data evaluating them and conclude that by spending a fraction of the time at a conference on involving...

Proceedings of the Fourth MDEP Conference on New Reactor Design Activities, 12-13 September 2017, London, United Kingdom

International Nuclear Information System (INIS)

Lacoste, Andre-Claude; Rigail, Anne-Cecile; Collet, Julien; Holahan, Gary; Garcia, Ismael; Rising, Agneta; Kaser, Greg; Wei, Xuejun; Turner, Shane; Wardle, Stephen; Allen, Stuart; Yates, Simon; Obushev, Andrey; Prinja, Nawal; Malouines, Philippe; Zhang, Hongwei; Bouard, Jean-Paul; Pickelmann, Johannes; Cofer, Darren; Shihong, Ma; Wang, Dejun; Hua, Liu; Emond, David; Nicaise, Norbert; Ivey, Randy C.; Woo, Sweng Woong; Easterling, Richard J.; Kim, Yun Ho; Lee, Sang Won; Svetlov, Sergey; Watson, Dave; Viktorsson, Christer; Zhang, Lin; Lambert, Didier; Zhang, Ke; Bezzubtsev, Valery S.; Nieh, Ho; ); Tiippana, Petteri; Bhardwaj, S.A.; Ferapontov, Alexey; Finnerty, Michael; Sato, Kenichi; Spitzer, Cornelia; )

2017-09-01

The Multinational Design Evaluation Programme (MDEP) is a unique multinational initiative leveraging the resources and knowledge of national regulators to review new reactor designs. The programme celebrated its 10. anniversary in 2006 and is recognised as an effective framework for regulatory co-operation and harmonisation. Over the first 10 years of its existence, MDEP has published 24 common positions and 13 technical reports. In 2015, the MDEP members extended the cooperation period from the end of 2017 to the end of 2022, focusing on its core mission of collaborating on new reactor design-specific activities. The scope of MDEP has been extended in 2016 to incorporate commissioning and early phase operation as MDEP areas of co-operation. At this important milestone, MDEP was willing to gather feedback on its current activities and discuss its future. To this end, MDEP organised its fourth MDEP conference. The event provided a forum for MDEP stakeholders (including industry representatives, standard development organisations and other international organisations) to share the results of their engagement with the programme and to deliver presentations on ongoing activities related to new reactor licensing. The two-day conference included sessions on codes and standards harmonisation, digital instrumentation and controls, supply chain regulatory issues and vendor inspection co-operation, influence of MDEP interactions on reactor designs safety, commissioning activities and perspectives for MDEP. This document gathers the presentations (slides) given at the 4. MDEP conference

SP-100 shield design automation process using expert system and heuristic search techniques

International Nuclear Information System (INIS)

Marcille, T.F.; Protsik, R.; Deane, N.A.; Hoover, D.G.

1993-01-01

The SP-100 shield subsystem design process has been modified to utilize the GE Corporate Reserch and Development program, ENGINEOUS (Tong 1990). ENGINEOUS is a software system that automates the use of Computer Aided Engineering (CAE) analysis programs in the engineering design process. The shield subsystem design process incorporates a nuclear subsystems design and performance code, a two-dimensional neutral particle transport code, several input processors and two general purpose neutronic output processors. Coupling these programs within ENGINEOUS provides automatic transition paths between applications, with no source code modifications. ENGINEOUS captures human design knowledge, as well as information about the specific CAE applications and stores this information in knowledge base files. The knowledge base information is used by the ENGINEOUS expert system to drive knowledge directed and knowledge supplemented search modules to find an optimum shield design for a given reactor definition, ensuring that specified constraints are satisfied. Alternate designs, not accommodated in the optimization design rules, can readily be explored through the use of a parametric study capability

Contaminant analysis automation, an overview

International Nuclear Information System (INIS)

Hollen, R.; Ramos, O. Jr.

1996-01-01

To meet the environmental restoration and waste minimization goals of government and industry, several government laboratories, universities, and private companies have formed the Contaminant Analysis Automation (CAA) team. The goal of this consortium is to design and fabricate robotics systems that standardize and automate the hardware and software of the most common environmental chemical methods. In essence, the CAA team takes conventional, regulatory- approved (EPA Methods) chemical analysis processes and automates them. The automation consists of standard laboratory modules (SLMs) that perform the work in a much more efficient, accurate, and cost- effective manner

Personal computer based home automation system

OpenAIRE

Hellmuth, George F.

1993-01-01

The systems engineering process is applied in the development of the preliminary design of a home automation communication protocol. The objective of the communication protocol is to provide a means for a personal computer to communicate with adapted appliances in the home. A needs analysis is used to ascertain that a need exist for a home automation system. Numerous design alternatives are suggested and evaluated to determine the best possible protocol design. Coaxial cable...

Fourth European Conference on Mechanism Science (EUCOMES 2012 Conference)

CERN Document Server

Ceccarelli, Marco; New Trends in Mechanism and Machine Science : Theory and Applications in Engineering

2013-01-01

This book contains the papers of the European Conference on Mechanisms Science (EUCOMES 2012 Conference). The book presents the most recent research developments in the mechanism and machine science field and their applications. Topics addressed are theoretical kinematics, computational kinematics, mechanism design, experimental mechanics, mechanics of robots, dynamics of machinery, dynamics of multi-body systems, control issues of mechanical systems, mechanisms for biomechanics, novel designs, mechanical transmissions, linkages and manipulators, micro-mechanisms, teaching methods, history of mechanism science and industrial and non-industrial applications. This volume will also serve as an interesting reference for European activity in the fields of Mechanism and Machine Science as well as a source of inspiration for future works and developments.

Automation from pictures

International Nuclear Information System (INIS)

Kozubal, A.J.

1992-01-01

The state transition diagram (STD) model has been helpful in the design of real time software, especially with the emergence of graphical computer aided software engineering (CASE) tools. Nevertheless, the translation of the STD to real time code has in the past been primarily a manual task. At Los Alamos we have automated this process. The designer constructs the STD using a CASE tool (Cadre Teamwork) using a special notation for events and actions. A translator converts the STD into an intermediate state notation language (SNL), and this SNL is compiled directly into C code (a state program). Execution of the state program is driven by external events, allowing multiple state programs to effectively share the resources of the host processor. Since the design and the code are tightly integrated through the CASE tool, the design and code never diverge, and we avoid design obsolescence. Furthermore, the CASE tool automates the production of formal technical documents from the graphic description encapsulated by the CASE tool. (author)

23rd International Conference on Systems Engineering

CERN Document Server

Zydek, Dawid; Chmaj, Grzegorz

2015-01-01

This collection of proceedings from the International Conference on Systems Engineering, Las Vegas, 2014 is orientated toward systems engineering, including topics like aerospace, power systems, industrial automation and robotics, systems theory, control theory, artificial intelligence, signal processing, decision support, pattern recognition and machine learning, information and communication technologies, image processing, and computer vision as well as its applications. The volume’s main focus is on models, algorithms, and software tools that facilitate efficient and convenient utilization of modern achievements in systems engineering.

BREED: a CDC-7600 computer program for the automation of breeder reactor design analysis (LWBR Development Program)

International Nuclear Information System (INIS)

Candelore, N.R.; Maher, C.M.

1985-03-01

BREED is an executive CDC-7600 program which was developed to facilitate the sequence of calculations and movement of data through a prescribed series of breeder reactor design computer programs in an uninterrupted single-job mode. It provides the capability to interface different application programs into a single computer run to provide a complete design function. The automation that can be achieved as a result of using BREED significantly reduces not only the time required for data preparation and hand transfer of data, but also the time required to complete an iteration of the total design effort. Data processing within a technical discipline and data transfer between technical disciplines can be accommodated. The input/output data processing is achieved with BREED by using a set of simple, easily understood user commands, usually short descriptive words, which the user inserts in his input deck. The input deck completely identifies and controls the calculational sequence needed to produce a desired end product. This report has been prepared to provide instructional material on the use of BREED and its user-oriented procedures to facilitate computer automation of design calculations

Automation of Educational Tasks for Academic Radiology.

Science.gov (United States)

Lamar, David L; Richardson, Michael L; Carlson, Blake

2016-07-01

The process of education involves a variety of repetitious tasks. We believe that appropriate computer tools can automate many of these chores, and allow both educators and their students to devote a lot more of their time to actual teaching and learning. This paper details tools that we have used to automate a broad range of academic radiology-specific tasks on Mac OS X, iOS, and Windows platforms. Some of the tools we describe here require little expertise or time to use; others require some basic knowledge of computer programming. We used TextExpander (Mac, iOS) and AutoHotKey (Win) for automated generation of text files, such as resident performance reviews and radiology interpretations. Custom statistical calculations were performed using TextExpander and the Python programming language. A workflow for automated note-taking was developed using Evernote (Mac, iOS, Win) and Hazel (Mac). Automated resident procedure logging was accomplished using Editorial (iOS) and Python. We created three variants of a teaching session logger using Drafts (iOS) and Pythonista (iOS). Editorial and Drafts were used to create flashcards for knowledge review. We developed a mobile reference management system for iOS using Editorial. We used the Workflow app (iOS) to automatically generate a text message reminder for daily conferences. Finally, we developed two separate automated workflows-one with Evernote (Mac, iOS, Win) and one with Python (Mac, Win)-that generate simple automated teaching file collections. We have beta-tested these workflows, techniques, and scripts on several of our fellow radiologists. All of them expressed enthusiasm for these tools and were able to use one or more of them to automate their own educational activities. Appropriate computer tools can automate many educational tasks, and thereby allow both educators and their students to devote a lot more of their time to actual teaching and learning. Copyright © 2016 The Association of University Radiologists

Automated Work Package: Initial Wireless Communication Platform Design, Development, and Evaluation

Energy Technology Data Exchange (ETDEWEB)

Al Rashdan, Ahmad Yahya Mohammad [Idaho National Laboratory; Agarwal, Vivek [Idaho National Laboratory

2016-03-01

The Department of Energy’s Light Water Reactor Sustainability Program is developing the scientific basis to ensure long-term reliability, productivity, safety, and security of the nuclear power industry in the United States. The Instrumentation, Information, and Control (II&C) pathway of the program aims to increase the role of advanced II&C technologies to achieve this objective. One of the pathway efforts at Idaho National Laboratory (INL) is to improve the work packages execution process by replacing the expensive, inefficient, bulky, complex, and error-prone paper-based work orders with automated work packages (AWPs). An AWP is an automated and dynamic presentation of the work package designed to guide the user through the work process. It is loaded on a mobile device, such as a tablet, and is capable of communicating with plant equipment and systems to acquire plant and procedure states. The AWP replaces those functions where a computer is more efficient and reliable than a human. To enable the automatic acquisition of plant data, it is necessary to design and develop a prototype platform for data exchange between the field instruments and the AWP mobile devices. The development of the platform aims to reveal issues and solutions generalizable to large-scale implementation of a similar system. Topics such as bandwidth, robustness, response time, interference, and security are usually associated with wireless communication. These concerns, along with other requirements, are listed in an earlier INL report. Specifically, the targeted issues and performance aspects in this work are relevant to the communication infrastructure from the perspective of promptness, robustness, expandability, and interoperability with different technologies.

International Conference on Innovative Design and Development Practices in Aerospace and Automotive Engineering

CERN Document Server

Chandrasekhar, U

2017-01-01

The book presents the best articles presented by researchers, academicians and industrial experts in the International Conference on “Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD 2016)”. The book discusses new concept designs, analysis and manufacturing technologies, where more swing is for improved performance through specific and/or multifunctional linguistic design aspects to downsize the system, improve weight to strength ratio, fuel efficiency, better operational capability at room and elevated temperatures, reduced wear and tear, NVH aspects while balancing the challenges of beyond Euro IV/Barat Stage IV emission norms, Greenhouse effects and recyclable materials. The innovative methods discussed in the book will serve as a reference material for educational and research organizations, as well as industry, to take up challenging projects of mutual interest.

Automated PCB Inspection System

Directory of Open Access Journals (Sweden)

Syed Usama BUKHARI

2017-05-01

Full Text Available Development of an automated PCB inspection system as per the need of industry is a challenging task. In this paper a case study is presented, to exhibit, a proposed system for an immigration process of a manual PCB inspection system to an automated PCB inspection system, with a minimal intervention on the existing production flow, for a leading automotive manufacturing company. A detailed design of the system, based on computer vision followed by testing and analysis was proposed, in order to aid the manufacturer in the process of automation.

The automated design of materials far from equilibrium

Science.gov (United States)

Miskin, Marc Z.

Automated design is emerging as a powerful concept in materials science. By combining computer algorithms, simulations, and experimental data, new techniques are being developed that start with high level functional requirements and identify the ideal materials that achieve them. This represents a radically different picture of how materials become functional in which technological demand drives material discovery, rather than the other way around. At the frontiers of this field, materials systems previously considered too complicated can start to be controlled and understood. Particularly promising are materials far from equilibrium. Material robustness, high strength, self-healing and memory are properties displayed by several materials systems that are intrinsically out of equilibrium. These and other properties could be revolutionary, provided they can first be controlled. This thesis conceptualizes and implements a framework for designing materials that are far from equilibrium. We show how, even in the absence of a complete physical theory, design from the top down is possible and lends itself to producing physical insight. As a prototype system, we work with granular materials: collections of athermal, macroscopic identical objects, since these materials function both as an essential component of industrial processes as well as a model system for many non-equilibrium states of matter. We show that by placing granular materials in the context of design, benefits emerge simultaneously for fundamental and applied interests. As first steps, we use our framework to design granular aggregates with extreme properties like high stiffness, and softness. We demonstrate control over nonlinear effects by producing exotic aggregates that stiffen under compression. Expanding on our framework, we conceptualize new ways of thinking about material design when automatic discovery is possible. We show how to build rules that link particle shapes to arbitrary granular packing

A Hybrid Genetic Programming Algorithm for Automated Design of Dispatching Rules.

Science.gov (United States)

Nguyen, Su; Mei, Yi; Xue, Bing; Zhang, Mengjie

2018-06-04

Designing effective dispatching rules for production systems is a difficult and timeconsuming task if it is done manually. In the last decade, the growth of computing power, advanced machine learning, and optimisation techniques has made the automated design of dispatching rules possible and automatically discovered rules are competitive or outperform existing rules developed by researchers. Genetic programming is one of the most popular approaches to discovering dispatching rules in the literature, especially for complex production systems. However, the large heuristic search space may restrict genetic programming from finding near optimal dispatching rules. This paper develops a new hybrid genetic programming algorithm for dynamic job shop scheduling based on a new representation, a new local search heuristic, and efficient fitness evaluators. Experiments show that the new method is effective regarding the quality of evolved rules. Moreover, evolved rules are also significantly smaller and contain more relevant attributes.

Automated design system for a rotor with an ellipse lobe profile

International Nuclear Information System (INIS)

Jung, Sung Yuen; Kim Chul; Han, Seung Moo; Cho, Hae Yong

2009-01-01

An internal lobe pump (ILP) is suitable for machine tool oil hydraulics, automotive engines, compressors, and various other devices. In particular, the ILP is an essential component of an automotive engine, used to feed lubricant oil through the system. The main components of an ILP are its rotors. The outer rotor is typically characterized by lobes with an elliptical shape, and the inner rotor profile is a conjugate to the outer profile. This paper describes a theoretical analysis of an ILP and the development of an integrated automated system for rotor design. This system is composed of three main modules and has been developed using AutoLISP for the AutoCAD program. The system generates a new lobe profile and automatically calculates flow rate and flow rate irregularity according to the lobe profile generated. Results obtained from the analysis can enable oil pump designers and manufacturers to become more efficient

Automated design system for a rotor with an ellipse lobe profile

Energy Technology Data Exchange (ETDEWEB)

Jung, Sung Yuen; Kim Chul [Pusan National University, Busan (Korea, Republic of); Han, Seung Moo [Kyung Hee University, Seoul (Korea, Republic of); Cho, Hae Yong [Chungbuk National University, Cheongju (Korea, Republic of)

2009-11-15

An internal lobe pump (ILP) is suitable for machine tool oil hydraulics, automotive engines, compressors, and various other devices. In particular, the ILP is an essential component of an automotive engine, used to feed lubricant oil through the system. The main components of an ILP are its rotors. The outer rotor is typically characterized by lobes with an elliptical shape, and the inner rotor profile is a conjugate to the outer profile. This paper describes a theoretical analysis of an ILP and the development of an integrated automated system for rotor design. This system is composed of three main modules and has been developed using AutoLISP for the AutoCAD program. The system generates a new lobe profile and automatically calculates flow rate and flow rate irregularity according to the lobe profile generated. Results obtained from the analysis can enable oil pump designers and manufacturers to become more efficient

The learning conference

DEFF Research Database (Denmark)

Ravn, Ib

little support amongst serious students of learning. The professional conference as a forum for knowledge sharing is in dire need of a new learning theory and a more enlightened practice. The notion of human flourishing is offered as basis for theory, and four simple design principles for the so......The typical one-day conference attended by managers or professionals in search of inspiration is packed with PowerPoint presentations and offers little opportunity for involvement or knowledge sharing. Behind the conventional conference format lurks the transfer model of learning, which finds......-called “learning conference” are proposed: People go to conferences to 1. get concise input, 2. interpret it in the light of their ongoing concerns, 3. talk about their current projects and 4. meet the other attendees and be inspired by them. Six practical techniques that induce attendees to do these things...

Bioreactor design for successive culture of anchorage-dependent cells operated in an automated manner.

Science.gov (United States)

Kino-Oka, Masahiro; Ogawa, Natsuki; Umegaki, Ryota; Taya, Masahito

2005-01-01

A novel bioreactor system was designed to perform a series of batchwise cultures of anchorage-dependent cells by means of automated operations of medium change and passage for cell transfer. The experimental data on contamination frequency ensured the biological cleanliness in the bioreactor system, which facilitated the operations in a closed environment, as compared with that in flask culture system with manual handlings. In addition, the tools for growth prediction (based on growth kinetics) and real-time growth monitoring by measurement of medium components (based on small-volume analyzing machinery) were installed into the bioreactor system to schedule the operations of medium change and passage and to confirm that culture proceeds as scheduled, respectively. The successive culture of anchorage-dependent cells was conducted with the bioreactor running in an automated way. The automated bioreactor gave a successful culture performance with fair accordance to preset scheduling based on the information in the latest subculture, realizing 79- fold cell expansion for 169 h. In addition, the correlation factor between experimental data and scheduled values through the bioreactor performance was 0.998. It was concluded that the proposed bioreactor with the integration of the prediction and monitoring tools could offer a feasible system for the manufacturing process of cultured tissue products.

Twenty-ninth ORNL/DOE conference on analytical chemistry in energy technology. Abstracts of papers

International Nuclear Information System (INIS)

1986-01-01

This booklet contains separate abstracts of 55 individual papers presented at this conference. Different sections in the book are titled as follows: laser techniques; resonance ionization spectroscopy; laser applications; new developments in mass spectrometry; analytical chemistry of hazardous waste; and automation and data management

Adaptive and Adaptable Automation Design: A Critical Review of the Literature and Recommendations for Future Research

Science.gov (United States)

Prinzel, Lawrence J., III; Kaber, David B.

2006-01-01

This report presents a review of literature on approaches to adaptive and adaptable task/function allocation and adaptive interface technologies for effective human management of complex systems that are likely to be issues for the Next Generation Air Transportation System, and a focus of research under the Aviation Safety Program, Integrated Intelligent Flight Deck Project. Contemporary literature retrieved from an online database search is summarized and integrated. The major topics include the effects of delegation-type, adaptable automation on human performance, workload and situation awareness, the effectiveness of various automation invocation philosophies and strategies to function allocation in adaptive systems, and the role of user modeling in adaptive interface design and the performance implications of adaptive interface technology.

Conference proceedings of the 4. international conference on CANDU fuel. V. 1,2

International Nuclear Information System (INIS)

1995-01-01

These proceedings contain the full texts of all 65 papers presented at the 4th International Conference on CANDU fuel. As such, they represent an update on the state-of-the-art in such important CANDU fuel topics as International Development Programs and Operating Experience with CANDU fuel, Performance Assessments and Fuel Behavior Modeling, Fuel Properties, Licensing and Accident Analyses for CANDU fuel, Design, Testing and Manufacturing, and Advanced Fuel Designs. The large number of papers required the use of parallel sessions for the first time at a CANDU Fuel Conference

Conference proceedings of the 4. international conference on CANDU fuel. V. 1,2

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

These proceedings contain the full texts of all 65 papers presented at the 4th International Conference on CANDU fuel. As such, they represent an update on the state-of-the-art in such important CANDU fuel topics as International Development Programs and Operating Experience with CANDU fuel, Performance Assessments and Fuel Behavior Modeling, Fuel Properties, Licensing and Accident Analyses for CANDU fuel, Design, Testing and Manufacturing, and Advanced Fuel Designs. The large number of papers required the use of parallel sessions for the first time at a CANDU Fuel Conference.

Plant automation-application to SBWR project

International Nuclear Information System (INIS)

Rodriguez Rodriguez, C.

1995-01-01

In accordance with the requirements set out in the URD (Utility Requirements Document) issued by the EPRI (Electrical Power Research Institute), the design of new reactors, whether evolutionary or passive, shall taken into account the systematic automation of functions relating to normal plant operation. The objectives established are to: =2E Simplify operator-performed tasks =2E Reduce the risk of operator-error by considering human factors in the allocation of tasks =2E Improve man-machine reliability =2E Increase the availability of the plant In previous designs, automation has only been considered from the point of view of compliance with regulatory requirements for safety-related systems, or in isolated cases, as a method of protecting the investment where there is a risk of damage to main equipment. The use of digital technology has prevented the systematic pursuit of such objectives in the design of automated systems for processes associated with normal plant operation (startup, load follow, normal shutdown, etc) from being excessively complex and therefore costly to undertake. This paper describes how the automation of the aforementioned normal plant operation activities has been approached in General Electric's SBWR (Simplified Boiling Water Reactor) design. (Author)

Development and Design of a User Interface for a Computer Automated Heating, Ventilation, and Air Conditioning System

International Nuclear Information System (INIS)

Anderson, B.

1999-01-01

A user interface is created to monitor and operate the heating, ventilation, and air conditioning system. The interface is networked to the system's programmable logic controller. The controller maintains automated control of the system. The user through the interface is able to see the status of the system and override or adjust the automatic control features. The interface is programmed to show digital readouts of system equipment as well as visual queues of system operational statuses. It also provides information for system design and component interaction. The interface is made easier to read by simple designs, color coordination, and graphics. Fermi National Accelerator Laboratory (Fermi lab) conducts high energy particle physics research. Part of this research involves collision experiments with protons, and anti-protons. These interactions are contained within one of two massive detectors along Fermilab's largest particle accelerator the Tevatron. The D-Zero Assembly Building houses one of these detectors. At this time detector systems are being upgraded for a second experiment run, titled Run II. Unlike the previous run, systems at D-Zero must be computer automated so operators do not have to continually monitor and adjust these systems during the run. Human intervention should only be necessary for system start up and shut down, and equipment failure. Part of this upgrade includes the heating, ventilation, and air conditioning system (HVAC system). The HVAC system is responsible for controlling two subsystems, the air temperatures of the D-Zero Assembly Building and associated collision hall, as well as six separate water systems used in the heating and cooling of the air and detector components. The BYAC system is automated by a programmable logic controller. In order to provide system monitoring and operator control a user interface is required. This paper will address methods and strategies used to design and implement an effective user interface

DIDACTIC AUTOMATED STATION OF COMPLEX KINEMATICS

Directory of Open Access Journals (Sweden)

Mariusz Sosnowski

2014-03-01

Full Text Available The paper presents the design, control system and software that controls the automated station of complex kinematics. Control interface and software has been developed and manufactured in the West Pomeranian University of Technology in Szczecin in the Department of Automated Manufacturing Systems Engineering and Quality. Conducting classes designed to teach programming and design of structures and systems for monitoring the robot kinematic components with non-standard structures was the reason for installation of the control system and software.

Report on the 10th anniversary of international drug discovery science and technology conference, 8 - 10 november 2012, nanjing, china.

Science.gov (United States)

Everett, Jeremy R

2013-03-01

The 10th Anniversary of International Drug Discovery Science and Technology (IDDST) Conference was held in Nanjing, China from 8 to 10 November 2012. The conference ran in parallel with the 2nd Annual Symposium of Drug Delivery Systems. Over 400 delegates from both conferences came together for the Opening Ceremony and Keynote Addresses but otherwise pursued separate paths in the huge facilities of the Nanjing International Expo Centre. The IDDST was arranged into 19 separate Chapters covering drug discovery biology, target validation, chemistry, rational drug design, pharmacology and toxicology, drug screening technology, 'omics' technologies, analytical, automation and enabling technologies, informatics, stem cells and regenerative medicine, bioprocessing, generics, biosimilars and biologicals and seven disease areas: cancer, CNS, respiratory and inflammation, autoimmune, emerging infectious, bone and orphan diseases. There were also two sessions of a 'Bench to Bedside to Business' Program and a Chinese Scientist programme. In each period of the IDDST conference, up to seven sessions were running in parallel. This Meeting Highlight samples just a fraction of the content of this large meeting. The talks included have as a link, the use of new approaches to drug discovery. Many other excellent talks could have been highlighted and the author has necessarily had to be selective.

Automated optical assembly

Science.gov (United States)

Bala, John L.

1995-08-01

Automation and polymer science represent fundamental new technologies which can be directed toward realizing the goal of establishing a domestic, world-class, commercial optics business. Use of innovative optical designs using precision polymer optics will enable the US to play a vital role in the next generation of commercial optical products. The increased cost savings inherent in the utilization of optical-grade polymers outweighs almost every advantage of using glass for high volume situations. Optical designers must gain experience with combined refractive/diffractive designs and broaden their knowledge base regarding polymer technology beyond a cursory intellectual exercise. Implementation of a fully automated assembly system, combined with utilization of polymer optics, constitutes the type of integrated manufacturing process which will enable the US to successfully compete with the low-cost labor employed in the Far East, as well as to produce an equivalent product.

Conceptual Design and Feasibility Analyses of a Robotic System for Automated Exterior Wall Painting

Directory of Open Access Journals (Sweden)

Young S. Kim

2008-11-01

Full Text Available There are approximately 6,677,000 apartment housing units in South Korea. Exterior wall painting for such multi-dwelling apartment housings in South Korea represents a typical area to which construction automation technology can be applied for improvement in safety, productivity, quality, and cost over the conventional method. The conventional exterior wall painting is costly and labor-intensive, and it especially exposes workers to significant health and safety risks. The primary objective of this study is to design a conceptual model of an exterior wall painting robot which is applicable to apartment housing construction and maintenance, and to conduct its technical?economical feasibility analyses. In this study, a design concept using a high ladder truck is proposed as the best alternative for automation of the exterior wall painting. Conclusions made in this study show that the proposed exterior wall painting robot is technically and economically feasible, and can greatly enhance safety, productivity, and quality compared to the conventional method. Finally, it is expected that the conceptual model of the exterior wall painting robot would be efficiently used in various applications in exterior wall finishing and maintenance of other architectural and civil structures such as commercial buildings, towers, and high-rise storage tanks.

Layered distributed architecture for plant automation

International Nuclear Information System (INIS)

Aravamuthan, G.; Verma, Yachika; Ranjan, Jyoti; Chachondia, Alka S.; Ganesh, G.

2005-01-01

The development of plant automation system and associated software remains one of the greatest challenges to the widespread implementation of highly adaptive re-configurable automation technology. This paper presents a layered distributed architecture for a plant automation system designed to support rapid reconfiguration and redeployment of automation components. The paper first presents evolution of automation architecture and their associated environment in the past few decades and then presents the concept of layered system architecture and the use of automation components to support the construction of a wide variety of automation system. It also highlights the role of standards and technology, which can be used in the development of automation components. We have attempted to adhere to open standards and technology for the development of automation component at a various layers. It also highlights the application of this concept in the development of an Operator Information System (OIS) for Advanced Heavy Water Reactor (AHWR). (author)

A fully automated primary screening system for the discovery of therapeutic antibodies directly from B cells.

Science.gov (United States)

Tickle, Simon; Howells, Louise; O'Dowd, Victoria; Starkie, Dale; Whale, Kevin; Saunders, Mark; Lee, David; Lightwood, Daniel

2015-04-01

For a therapeutic antibody to succeed, it must meet a range of potency, stability, and specificity criteria. Many of these characteristics are conferred by the amino acid sequence of the heavy and light chain variable regions and, for this reason, can be screened for during antibody selection. However, it is important to consider that antibodies satisfying all these criteria may be of low frequency in an immunized animal; for this reason, it is essential to have a mechanism that allows for efficient sampling of the immune repertoire. UCB's core antibody discovery platform combines high-throughput B cell culture screening and the identification and isolation of single, antigen-specific IgG-secreting B cells through a proprietary technique called the "fluorescent foci" method. Using state-of-the-art automation to facilitate primary screening, extremely efficient interrogation of the natural antibody repertoire is made possible; more than 1 billion immune B cells can now be screened to provide a useful starting point from which to identify the rare therapeutic antibody. This article will describe the design, construction, and commissioning of a bespoke automated screening platform and two examples of how it was used to screen for antibodies against two targets. © 2014 Society for Laboratory Automation and Screening.

Design and implementation of an automated email notification system for results of tests pending at discharge.

Science.gov (United States)

Dalal, Anuj K; Schnipper, Jeffrey L; Poon, Eric G; Williams, Deborah H; Rossi-Roh, Kathleen; Macleay, Allison; Liang, Catherine L; Nolido, Nyryan; Budris, Jonas; Bates, David W; Roy, Christopher L

2012-01-01

Physicians are often unaware of the results of tests pending at discharge (TPADs). The authors designed and implemented an automated system to notify the responsible inpatient physician of the finalized results of TPADs using secure, network email. The system coordinates a series of electronic events triggered by the discharge time stamp and sends an email to the identified discharging attending physician once finalized results are available. A carbon copy is sent to the primary care physicians in order to facilitate communication and the subsequent transfer of responsibility. Logic was incorporated to suppress selected tests and to limit notification volume. The system was activated for patients with TPADs discharged by randomly selected inpatient-attending physicians during a 6-month pilot. They received approximately 1.6 email notifications per discharged patient with TPADs. Eighty-four per cent of inpatient-attending physicians receiving automated email notifications stated that they were satisfied with the system in a brief survey (59% survey response rate). Automated email notification is a useful strategy for managing results of TPADs.

Virtual Diagnostic Sensors Design for an Automated Guided Vehicle

Directory of Open Access Journals (Sweden)

Ralf Stetter

2018-05-01

Full Text Available In recent years, Automated Guided Vehicles (AGVs have been playing an increasingly important role in producing industry and infrastructure and will soon arrive to other areas of human life such as the transportation of goods and people. However, several challenges still aggravate the operation of AGVs, which limit the amount of implementation. One major challenge is the realization of reliable sensors that can capture the different aspects of the state of an AGV as well as its surroundings. One promising approach towards more reliable sensors is the supplementary application of virtual sensors, which are able to generate virtual measurements by using other sources of information such as actuator states and already existing sensors together with appropriate mathematical models. The focus of the research described in this paper is the design of virtual sensors determining forces and torques acting on an AGV. The proposed novel approach is using a quadratic boundedness approach, which makes it possible to include bounded disturbances acting on the AGV. One major advantage of the presented approach is that the use of complex tire models can be avoided. Information from acceleration and yaw rate sensors is processed in order to realize reliable virtual force and torque sensors. The resulting force and torque information can be used for several diagnostic purposes such as fault detection or fault prevention. The presented approach is explained and verified on the basis of an innovative design of an AGV. This innovative design addresses another major challenge for AGVs, which is the limited maneuvering possibilities of many AGV designs. The innovative design allows nearly unlimited maneuvering possibilities but requires reliable sensor data. The application of the approach in the AGV resulted in the insight that the generated estimates are consistent with the longitudinal forces and torques obtained by a proven reference model.

Modeling Real-Time Human-Automation Collaborative Scheduling of Unmanned Vehicles

Science.gov (United States)

2013-06-01

Bundle Algorithm (CBBA), a decentralized, polynomial-time, market based protocol (Choi, et al., 2009). More details on the AS can be found in (Whitten...infonned consent to panicipate in this research study. Signature oflnvesligator Date Approved on 31-0CT-2012 - MIT JRB Protocol #: 1110005179- Expires on...presented at the IEEE International Conference on Robotics and Automation, Karlsruhe, Germany. Miller, C. (2004). Human-Computer Etiquette : Managing

Employment Opportunities for the Handicapped in Programmable Automation.

Science.gov (United States)

Swift, Richard; Leneway, Robert

A Computer Integrated Manufacturing System may make it possible for severely disabled people to custom design, machine, and manufacture either wood or metal parts. Programmable automation merges computer aided design, computer aided manufacturing, computer aided engineering, and computer integrated manufacturing systems with automated production…

2nd International Conference on Mechatronics and Automatic Control

CERN Document Server

2015-01-01

This book examines mechatronics and automatic control systems. The book covers important emerging topics in signal processing, control theory, sensors, mechanic manufacturing systems and automation. The book presents papers from the second International Conference on Mechatronics and Automatic Control Systems held in Beijing, China on September 20-21, 2014. Examines how to improve productivity through the latest advanced technologies Covering new systems and techniques in the broad field of mechatronics and automatic control systems.

7th IEEE International Conference Intelligent Systems

CERN Document Server

Atanassov, KT; Doukovska, L; Hadjiski, M; Jotsov, V; Kacprzyk, J; Kasabov, N; Sotirov, S; Szmidt, E; Zadrożny, S; Filev, D; Jabłkowski, J; Kacprzyk, J; Krawczak, M; Popchev, I; Rutkowski, L; Sgurev, V; Sotirova, E; Szynkarczyk, P

2015-01-01

This two volume set of books constitutes the proceedings of the 2014  7th IEEE International Conference Intelligent Systems (IS), or IEEE IS’2014 for short, held on September 24‐26, 2014 in Warsaw, Poland. Moreover, it contains some selected papers from the collocated IWIFSGN'2014-Thirteenth International Workshop on Intuitionistic Fuzzy Sets and Generalized Nets.The conference was organized by the Systems Research Institute, Polish Academy of Sciences, Department IV of Engineering Sciences, Polish Academy of Sciences, and Industrial Institute of Automation and Measurements - PIAP.The papers included in the two proceedings volumes have been subject to a thorough review process by three highly qualified peer reviewers.Comments and suggestions from them have considerable helped improve the quality of the papers but also the division of the volumes into parts, and assignment of the papers to the best suited parts.  

Computational Biology Support: RECOMB Conference Series (Conference Support)

Energy Technology Data Exchange (ETDEWEB)

Michael Waterman

2006-06-15

This funding was support for student and postdoctoral attendance at the Annual Recomb Conference from 2001 to 2005. The RECOMB Conference series was founded in 1997 to provide a scientific forum for theoretical advances in computational biology and their applications in molecular biology and medicine. The conference series aims at attracting research contributions in all areas of computational molecular biology. Typical, but not exclusive, the topics of interest are: Genomics, Molecular sequence analysis, Recognition of genes and regulatory elements, Molecular evolution, Protein structure, Structural genomics, Gene Expression, Gene Networks, Drug Design, Combinatorial libraries, Computational proteomics, and Structural and functional genomics. The origins of the conference came from the mathematical and computational side of the field, and there remains to be a certain focus on computational advances. However, the effective use of computational techniques to biological innovation is also an important aspect of the conference. The conference had a growing number of attendees, topping 300 in recent years and often exceeding 500. The conference program includes between 30 and 40 contributed papers, that are selected by a international program committee with around 30 experts during a rigorous review process rivaling the editorial procedure for top-rate scientific journals. In previous years papers selection has been made from up to 130--200 submissions from well over a dozen countries. 10-page extended abstracts of the contributed papers are collected in a volume published by ACM Press and Springer, and are available at the conference. Full versions of a selection of the papers are published annually in a special issue of the Journal of Computational Biology devoted to the RECOMB Conference. A further point in the program is a lively poster session. From 120-300 posters have been presented each year at RECOMB 2000. One of the highlights of each RECOMB conference is a

Embedded design based virtual instrument program for positron beam automation

International Nuclear Information System (INIS)

Jayapandian, J.; Gururaj, K.; Abhaya, S.; Parimala, J.; Amarendra, G.

2008-01-01

Automation of positron beam experiment with a single chip embedded design using a programmable system on chip (PSoC) which provides easy interfacing of the high-voltage DC power supply is reported. Virtual Instrument (VI) control program written in Visual Basic 6.0 ensures the following functions (i) adjusting of sample high voltage by interacting with the programmed PSoC hardware, (ii) control of personal computer (PC) based multi channel analyzer (MCA) card for energy spectroscopy, (iii) analysis of the obtained spectrum to extract the relevant line shape parameters, (iv) plotting of relevant parameters and (v) saving the file in the appropriate format. The present study highlights the hardware features of the PSoC hardware module as well as the control of MCA and other units through programming in Visual Basic

Automated controlled-potential coulometric determination of uranium

International Nuclear Information System (INIS)

Knight, C.H.; Clegg, D.E.; Wright, K.D.; Cassidy, R.M.

1982-06-01

A controlled-potential coulometer has been automated in our laboratory for routine determination of uranium in solution. The CRNL-designed automated system controls degassing, prereduction, and reduction of the sample. The final result is displayed on a digital coulometer readout. Manual and automated modes of operation are compared to show the precision and accuracy of the automated system. Results are also shown for the coulometric titration of typical uranium-aluminum alloy samples

Highway Electrification And Automation

OpenAIRE

Shladover, Steven E.

1992-01-01

This report addresses how the California Department of Transportation and the California PATH Program have made efforts to evaluate the feasibility and applicability of highway electrification and automation technologies. In addition to describing how the work was conducted, the report also describes the findings on highway electrification and highway automation, with experimental results, design study results, and a region-wide application impacts study for Los Angeles.

Automated Theorem Proving in High-Quality Software Design

Science.gov (United States)

Schumann, Johann; Swanson, Keith (Technical Monitor)

2001-01-01

The amount and complexity of software developed during the last few years has increased tremendously. In particular, programs are being used more and more in embedded systems (from car-brakes to plant-control). Many of these applications are safety-relevant, i.e. a malfunction of hardware or software can cause severe damage or loss. Tremendous risks are typically present in the area of aviation, (nuclear) power plants or (chemical) plant control. Here, even small problems can lead to thousands of casualties and huge financial losses. Large financial risks also exist when computer systems are used in the area of telecommunication (telephone, electronic commerce) or space exploration. Computer applications in this area are not only subject to safety considerations, but also security issues are important. All these systems must be designed and developed to guarantee high quality with respect to safety and security. Even in an industrial setting which is (or at least should be) aware of the high requirements in Software Engineering, many incidents occur. For example, the Warshaw Airbus crash, was caused by an incomplete requirements specification. Uncontrolled reuse of an Ariane 4 software module was the reason for the Ariane 5 disaster. Some recent incidents in the telecommunication area, like illegal "cloning" of smart-cards of D2GSM handies, or the extraction of (secret) passwords from German T-online users show that also in this area serious flaws can happen. Due to the inherent complexity of computer systems, most authors claim that only a rigorous application of formal methods in all stages of the software life cycle can ensure high quality of the software and lead to real safe and secure systems. In this paper, we will have a look, in how far automated theorem proving can contribute to a more widespread application of formal methods and their tools, and what automated theorem provers (ATPs) must provide in order to be useful.

USB port compatible virtual instrument based automation for x-ray diffractometer setup

International Nuclear Information System (INIS)

Jayapandian, J.; Sheela, O.K.; Mallika, R.; Thiruarul, A.; Purniah, B.

2004-01-01

Windows based virtual instrument (VI) programs in graphic language simplify the design automation in R and D laboratories. With minimal hardware and maximum support of software, the automation becomes easier and user friendly. A novel design approach for the automation of SIEMENS make x-ray diffractometer setup is described in this paper. The automation is achieved with an indigenously developed virtual instrument program in labVIEW ver.6.0 and with a simple hardware design using 89C2051 micro-controller compatible with PC's USB port for the total automation of the experiment. (author)

Improving Usefulness of Automated Driving by Lowering Primary Task Interference through HMI Design

Directory of Open Access Journals (Sweden)

Frederik Naujoks

2017-01-01

Full Text Available During conditionally automated driving (CAD, driving time can be used for non-driving-related tasks (NDRTs. To increase safety and comfort of an automated ride, upcoming automated manoeuvres such as lane changes or speed adaptations may be communicated to the driver. However, as the driver’s primary task consists of performing NDRTs, they might prefer to be informed in a nondistracting way. In this paper, the potential of using speech output to improve human-automation interaction is explored. A sample of 17 participants completed different situations which involved communication between the automation and the driver in a motion-based driving simulator. The Human-Machine Interface (HMI of the automated driving system consisted of a visual-auditory HMI with either generic auditory feedback (i.e., standard information tones or additional speech output. The drivers were asked to perform a common NDRT during the drive. Compared to generic auditory output, communicating upcoming automated manoeuvres additionally by speech led to a decrease in self-reported visual workload and decreased monitoring of the visual HMI. However, interruptions of the NDRT were not affected by additional speech output. Participants clearly favoured the HMI with additional speech-based output, demonstrating the potential of speech to enhance usefulness and acceptance of automated vehicles.

Human-centred automation: an explorative study

International Nuclear Information System (INIS)

Hollnagel, Erik; Miberg, Ann Britt

1999-05-01

The purpose of the programme activity on human-centred automation at the HRP is to develop knowledge (in the form of models and theories) and tools (in the form of techniques and simulators) to support design of automation that ensures effective human performance and comprehension. This report presents the work done on both the analytical and experimental side of this project. The analytical work has surveyed common definitions of automation and traditional design principles. A general finding is that human-centred automation usually is defined in terms of what it is not. This is partly due to a lack of adequate models and of human-automation interaction. Another result is a clarification of the consequences of automation, in particular with regard to situation awareness and workload. The experimental work has taken place as an explorative experiment in HAMMLAB in collaboration with IPSN (France). The purpose of this experiment was to increase the understanding of how automation influences operator performance in NPP control rooms. Two different types of automation (extensive and limited) were considered in scenarios having two different degrees of complexity (high and low), and involving diagnostic and procedural tasks. Six licensed NPP crews from the NPP at Loviisa, Finland, participated in the experiment. The dependent variables applied were plant performance, operator performance, self-rated crew performance, situation awareness, workload, and operator trust in the automation. The results from the diagnostic scenarios indicated that operators' judgement of crew efficiency was related to their level of trust in the automation, and further that operators trusted automation least and rated crew performance lowest in situations where crew performance was efficient and vice versa. The results from procedural scenarios indicated that extensive automation efficiently supported operators' performance, and further that operator' judgement of crew performance efficiency

Toward a human-centered aircraft automation philosophy

Science.gov (United States)

Billings, Charles E.

1989-01-01

The evolution of automation in civil aircraft is examined in order to discern trends in the respective roles and functions of automation technology and the humans who operate these aircraft. The effects of advances in automation technology on crew reaction is considered and it appears that, though automation may well have decreased the frequency of certain types of human errors in flight, it may also have enabled new categories of human errors, some perhaps less obvious and therefore more serious than those it has alleviated. It is suggested that automation could be designed to keep the pilot closer to the control of the vehicle, while providing an array of information management and aiding functions designed to provide the pilot with data regarding flight replanning, degraded system operation, and the operational status and limits of the aircraft, its systems, and the physical and operational environment. The automation would serve as the pilot's assistant, providing and calculating data, watching for the unexpected, and keeping track of resources and their rate of expenditure.

Fifth Conference on Artificial Intelligence for Space Applications

Science.gov (United States)

Odell, Steve L. (Compiler)

1990-01-01

The Fifth Conference on Artificial Intelligence for Space Applications brings together diverse technical and scientific work in order to help those who employ AI methods in space applications to identify common goals and to address issues of general interest in the AI community. Topics include the following: automation for Space Station; intelligent control, testing, and fault diagnosis; robotics and vision; planning and scheduling; simulation, modeling, and tutoring; development tools and automatic programming; knowledge representation and acquisition; and knowledge base/data base integration.

Automated processing of endoscopic surgical instruments.

Science.gov (United States)

Roth, K; Sieber, J P; Schrimm, H; Heeg, P; Buess, G

1994-10-01

This paper deals with the requirements for automated processing of endoscopic surgical instruments. After a brief analysis of the current problems, solutions are discussed. Test-procedures have been developed to validate the automated processing, so that the cleaning results are guaranteed and reproducable. Also a device for testing and cleaning was designed together with Netzsch Newamatic and PCI, called TC-MIC, to automate processing and reduce manual work.

The accuracy of a designed software for automated localization of craniofacial landmarks on CBCT images

International Nuclear Information System (INIS)

Shahidi, Shoaleh; Bahrampour, Ehsan; Soltanimehr, Elham; Zamani, Ali; Oshagh, Morteza; Moattari, Marzieh; Mehdizadeh, Alireza

2014-01-01

Two-dimensional projection radiographs have been traditionally considered the modality of choice for cephalometric analysis. To overcome the shortcomings of two-dimensional images, three-dimensional computed tomography (CT) has been used to evaluate craniofacial structures. However, manual landmark detection depends on medical expertise, and the process is time-consuming. The present study was designed to produce software capable of automated localization of craniofacial landmarks on cone beam (CB) CT images based on image registration and to evaluate its accuracy. The software was designed using MATLAB programming language. The technique was a combination of feature-based (principal axes registration) and voxel similarity-based methods for image registration. A total of 8 CBCT images were selected as our reference images for creating a head atlas. Then, 20 CBCT images were randomly selected as the test images for evaluating the method. Three experts twice located 14 landmarks in all 28 CBCT images during two examinations set 6 weeks apart. The differences in the distances of coordinates of each landmark on each image between manual and automated detection methods were calculated and reported as mean errors. The combined intraclass correlation coefficient for intraobserver reliability was 0.89 and for interobserver reliability 0.87 (95% confidence interval, 0.82 to 0.93). The mean errors of all 14 landmarks were <4 mm. Additionally, 63.57% of landmarks had a mean error of <3 mm compared with manual detection (gold standard method). The accuracy of our approach for automated localization of craniofacial landmarks, which was based on combining feature-based and voxel similarity-based methods for image registration, was acceptable. Nevertheless we recommend repetition of this study using other techniques, such as intensity-based methods

28th International Conference on CAD/CAM, Robotics and Factories of the Future

CERN Document Server

Syan, Chanan

2016-01-01

This volume is based on the proceedings of the 28th International Conference on CAD/CAM, Robotics and Factories of the Future. This book specially focuses on the positive changes made in the field of robotics, CAD/CAM and future outlook for emerging manufacturing units. Some of the important topics discussed in the conference are product development and sustainability, modeling and simulation, automation, robotics and handling systems, supply chain management and logistics, advanced manufacturing processes, human aspects in engineering activities, emerging scenarios in engineering education and training. The contents of this set of proceedings will prove useful to both researchers and practitioners.

Automation U.S.A.: Overcoming Barriers to Automation.

Science.gov (United States)

Brody, Herb

1985-01-01

Although labor unions and inadequate technology play minor roles, the principal barrier to factory automation is "fear of change." Related problems include long-term benefits, nontechnical executives, and uncertainty of factory cost accounting. Industry support for university programs is helping to educate engineers to design, implement, and…

Space environments and their effects on space automation and robotics

Science.gov (United States)

Garrett, Henry B.

1990-01-01

Automated and robotic systems will be exposed to a variety of environmental anomalies as a result of adverse interactions with the space environment. As an example, the coupling of electrical transients into control systems, due to EMI from plasma interactions and solar array arcing, may cause spurious commands that could be difficult to detect and correct in time to prevent damage during critical operations. Spacecraft glow and space debris could introduce false imaging information into optical sensor systems. The presentation provides a brief overview of the primary environments (plasma, neutral atmosphere, magnetic and electric fields, and solid particulates) that cause such adverse interactions. The descriptions, while brief, are intended to provide a basis for the other papers presented at this conference which detail the key interactions with automated and robotic systems. Given the growing complexity and sensitivity of automated and robotic space systems, an understanding of adverse space environments will be crucial to mitigating their effects.

OPTIMIZING THE DESIGN OF THE SYSTEMS OF INFORMATION PROTECTION IN AUTOMATED INFORMATIONAL SYSTEMS OF INDUSTRIAL ENTERPRISES

Directory of Open Access Journals (Sweden)

I. E. L'vovich

2014-01-01

Full Text Available Summary. Now to increase of indicators of efficiency and operability of difficult systems apply an automation equipment. The increasing role of information which became universal goods for relationship between various structures is noted. The question of its protection becomes the most actual. Special value is allocated for optimum design at creation of systems of the protection, allowing with the greatest probability to choose the best decisions on a set of alternatives. Now it becomes actual for the majority of the industrial enterprises as correctly designed and introduced system of protection will be pledge of successful functioning and competitiveness of all organization. Stages of works on creation of an information security system of the industrial enterprise are presented. The attention is focused on one of the most important approaches to realization of optimum design – multialternative optimization. In article the structure of creation of system of protection from the point of view of various models is considered, each of which gives an idea of features of design of system as a whole. The special attention is paid to a problem of creation of an information security system as it has the most difficult structure. Tasks for processes of automation of each of design stages of system of information security of the industrial enterprises are designated. Idea of each of stages of works is given at design of system of protection that allows to understand in the best way internal structure of creation of system of protection. Therefore, it is given the chance of evident submission of necessary requirements to creation of a reliable complex of information security of the industrial enterprise. Thereby it is given the chance of leveling of risks at early design stages of systems of protection, the organization and definition of necessary types of hardware-software complexes for future system.

Preface of Special issue on Automated Verification of Critical Systems (AVoCS'14)

NARCIS (Netherlands)

Huisman, Marieke; van de Pol, Jaco

2016-01-01

AVoCS 2014, the 14th International Conference on Automated Verification of Critical Systems has been hosted by the University of Twente, and has taken place in Enschede, Netherlands, on 24–26 September, 2014. The aim of the AVoCS series is to contribute to the interaction and exchange of ideas among

2nd Bozeman Conference

CERN Document Server

Lund, John

1991-01-01

This volume contains a collection of papers delivered by the partici­ pants at the second Conference on Computation and Control held at Mon­ tana State University in Bozeman, Montana from August 1-7, 1990. The conference, as well as this proceedings, attests to the vitality and cohesion between the control theorist and the numerical analyst that was adver­ tised by the first Conference on Computation and Control in 1988. The proceedings of that initial conference was published by Birkhiiuser Boston as the first volume of this same series entitled Computation and Control, Proceedings of the Bozeman Conference, Bozeman, Montana, 1988. Control theory and numerical analysis are both, by their very nature, interdisciplinary subjects as evidenced by their interaction with other fields of mathematics and engineering. While it is clear that new control or es­ timation algorithms and new feedback design methodologies will need to be implemented computationally, it is likewise clear that new problems in computation...

A sensor-based automation system for handling nuclear materials

International Nuclear Information System (INIS)

Drotning, W.; Kimberly, H.; Wapman, W.; Darras, D.

1997-01-01

An automated system is being developed for handling large payloads of radioactive nuclear materials in an analytical laboratory. The automation system performs unpacking and repacking of payloads from shipping and storage containers, and delivery of the payloads to the stations in the laboratory. The system uses machine vision and force/torque sensing to provide sensor-based control of the automation system in order to enhance system safety, flexibility, and robustness, and achieve easy remote operation. The automation system also controls the operation of the laboratory measurement systems and the coordination of them with the robotic system. Particular attention has been given to system design features and analytical methods that provide an enhanced level of operational safety. Independent mechanical gripper interlock and tool release mechanisms were designed to prevent payload mishandling. An extensive Failure Modes and Effects Analysis of the automation system was developed as a safety design analysis tool

Bar-code automated waste tracking system

International Nuclear Information System (INIS)

Hull, T.E.

1994-10-01

The Bar-Code Automated Waste Tracking System was designed to be a site-Specific program with a general purpose application for transportability to other facilities. The system is user-friendly, totally automated, and incorporates the use of a drive-up window that is close to the areas dealing in container preparation, delivery, pickup, and disposal. The system features ''stop-and-go'' operation rather than a long, tedious, error-prone manual entry. The system is designed for automation but allows operators to concentrate on proper handling of waste while maintaining manual entry of data as a backup. A large wall plaque filled with bar-code labels is used to input specific details about any movement of waste

AP600 level of automation: United States utility perspective

International Nuclear Information System (INIS)

Bekkerman, A.Y.

1997-01-01

Design of the AP600 advanced nuclear plant man-machine interface system (M-MIS) is guided by the applicable requirements from the Utility Requirements Document (URD). However, the URD has left certain aspects of the M-MIS to be determined by the designer working together with utilities sponsoring the work. This is particularly true in the case of the level of automation to be designed into the M-MIS. Based on experience from currently operating plants, utilities have specified the identity and roles of personnel in the control room, which has led to establishing a number of level of automation issues for the AP600. The key role of automated computerized procedures in the AP600 automation has been determined and resolved. 5 refs

Proceedings of GeoCalgary 2010 : the 63. Canadian geotechnical conference and 6. Canadian permafrost conference

Energy Technology Data Exchange (ETDEWEB)

Kwok, C. [Stantec Consulting Ltd., Calgary, AB (Canada); Moorman, B. [Calgary Univ., AB (Canada); Armstrong, R. [AECOM, Calgary, AB (Canada); Henderson, J. [Associated Geosciences Ltd., Calgary, AB (Canada)] (comps.) (and others)

2010-07-01

More than 500 delegates from industry, government, universities and research centres attended this conference to exchange professional knowledge on research and development that affects all sectors of geotechnical engineering, applied geology and hydrogeology. The conference also highlighted recent geoenvironmental achievements. The geotechnical sessions were entitled: transportation geotechniques; soil mechanics; foundations; infrastructure design and operations in permafrost; mining in permafrost; oil sands geotechnology; rock mechanics; landslides; permafrost foundation design and slope stability; groundwater and slope stability; seepage and hydrogeology; harbour and shoreline geotechniques; mine drainage; mine site remediation; climate change; ground ice; geophysics and remote sensing; geoenvironmental sustainability; Mackenzie Delta Rock Glaciers; engineering geology; geohazards; waste soils and soil stabilization. The conference featured more than 230 presentations, of which 33 have been catalogued separately for inclusion in this database. refs., tabs., figs.

Powder handling for automated fuel processing

International Nuclear Information System (INIS)

Frederickson, J.R.; Eschenbaum, R.C.; Goldmann, L.H.

1989-01-01

Installation of the Secure Automated Fabrication (SAF) line has been completed. It is located in the Fuel Cycle Plant (FCP) at the Department of Energy's (DOE) Hanford site near Richland, Washington. The SAF line was designed to fabricate advanced reactor fuel pellets and assemble fuel pins by automated, remote operation. This paper describes powder handling equipment and techniques utilized for automated powder processing and powder conditioning systems in this line. 9 figs

Test Results for the Automated Rendezvous and Capture System

Science.gov (United States)

Cruzen, Craig; Dabney, Richard; Lomas, James

1999-01-01

The Automated Rendezvous and Capture (AR&C) system was designed and tested at NASA's Marshall Space Flight Center (MSFC) to demonstrate technologies and mission strategies for automated rendezvous and docking of spacecraft in Earth orbit, The system incorporates some of the latest innovations in Global Positioning, System space navigation, laser sensor technologies and automated mission sequencing algorithms. The system's initial design and integration was completed in 1998 and has undergone testing at MSFC. This paper describes the major components of the AR&C system and presents results from the official system tests performed in MSFC's Flight Robotics Laboratory with digital simulations and hardware in the loop tests. The results show that the AR&C system can safely and reliably perform automated rendezvous and docking missions in the absence of system failures with 100 percent success. When system failures are included, the system uses its automated collision avoidance maneuver logic to recover in a safe manner. The primary objective of the AR&C project is to prove that by designing a safe and robust automated system, mission operations cost can be reduced by decreasing the personnel required for mission design, preflight planning and training required for crewed rendezvous and docking missions.

The Joint International Conference of the XII International Conference on Mechanisms and Mechanical Transmissions (MTM) and the XXIII International Conference on Robotics (Robotics ’16)

CERN Document Server

Lovasz, Erwin-Christian; Hüsing, Mathias; Maniu, Inocentiu; Gruescu, Corina

2017-01-01

This volume presents the proceedings of the Joint International Conference of the XII International Conference on Mechanisms and Mechanical Transmissions (MTM) and the XXIII International Conference on Robotics (Robotics ’16), that was held in Aachen, Germany, October 26th-27th, 2016. It contains applications of mechanisms and transmissions in several modern technical fields such as mechatronics, biomechanics, machines, micromachines, robotics and apparatus. In connection with these fields, the work combines the theoretical results with experimental testing. The book presents reviewed papers developed by researchers specialized in mechanisms analysis and synthesis, dynamics of mechanisms and machines, mechanical transmissions, biomechanics, precision mechanics, mechatronics, micromechanisms and microactuators, computational and experimental methods, CAD in mechanism and machine design, mechanical design of robot architecture, parallel robots, mobile robots, micro and nano robots, sensors and actuators in ro...

Automated magnetic divertor design for optimal power exhaust

Energy Technology Data Exchange (ETDEWEB)

Blommaert, Maarten

2017-07-01

The so-called divertor is the standard particle and power exhaust system of nuclear fusion tokamaks. In essence, the magnetic configuration hereby 'diverts' the plasma to a specific divertor structure. The design of this divertor is still a key issue to be resolved to evolve from experimental fusion tokamaks to commercial power plants. The focus of this dissertation is on one particular design requirement: avoiding excessive heat loads on the divertor structure. The divertor design process is assisted by plasma edge transport codes that simulate the plasma and neutral particle transport in the edge of the reactor. These codes are computationally extremely demanding, not in the least due to the complex collisional processes between plasma and neutrals that lead to strong radiation sinks and macroscopic heat convection near the vessel walls. One way of improving the heat exhaust is by modifying the magnetic confinement that governs the plasma flow. In this dissertation, automated design of the magnetic configuration is pursued using adjoint based optimization methods. A simple and fast perturbation model is used to compute the magnetic field in the vacuum vessel. A stable optimal design method of the nested type is then elaborated that strictly accounts for several nonlinear design constraints and code limitations. Using appropriate cost function definitions, the heat is spread more uniformly over the high-heat load plasma-facing components in a practical design example. Furthermore, practical in-parts adjoint sensitivity calculations are presented that provide a way to an efficient optimization procedure. Results are elaborated for a fictituous JET (Joint European Torus) case. The heat load is strongly reduced by exploiting an expansion of the magnetic flux towards the solid divertor structure. Subsequently, shortcomings of the perturbation model for magnetic field calculations are discussed in comparison to a free boundary equilibrium (FBE) simulation

Automated magnetic divertor design for optimal power exhaust

International Nuclear Information System (INIS)

Blommaert, Maarten

2017-01-01

The so-called divertor is the standard particle and power exhaust system of nuclear fusion tokamaks. In essence, the magnetic configuration hereby 'diverts' the plasma to a specific divertor structure. The design of this divertor is still a key issue to be resolved to evolve from experimental fusion tokamaks to commercial power plants. The focus of this dissertation is on one particular design requirement: avoiding excessive heat loads on the divertor structure. The divertor design process is assisted by plasma edge transport codes that simulate the plasma and neutral particle transport in the edge of the reactor. These codes are computationally extremely demanding, not in the least due to the complex collisional processes between plasma and neutrals that lead to strong radiation sinks and macroscopic heat convection near the vessel walls. One way of improving the heat exhaust is by modifying the magnetic confinement that governs the plasma flow. In this dissertation, automated design of the magnetic configuration is pursued using adjoint based optimization methods. A simple and fast perturbation model is used to compute the magnetic field in the vacuum vessel. A stable optimal design method of the nested type is then elaborated that strictly accounts for several nonlinear design constraints and code limitations. Using appropriate cost function definitions, the heat is spread more uniformly over the high-heat load plasma-facing components in a practical design example. Furthermore, practical in-parts adjoint sensitivity calculations are presented that provide a way to an efficient optimization procedure. Results are elaborated for a fictituous JET (Joint European Torus) case. The heat load is strongly reduced by exploiting an expansion of the magnetic flux towards the solid divertor structure. Subsequently, shortcomings of the perturbation model for magnetic field calculations are discussed in comparison to a free boundary equilibrium (FBE) simulation. These flaws

Large - scale Rectangular Ruler Automated Verification Device

Science.gov (United States)

Chen, Hao; Chang, Luping; Xing, Minjian; Xie, Xie

2018-03-01

This paper introduces a large-scale rectangular ruler automated verification device, which consists of photoelectric autocollimator and self-designed mechanical drive car and data automatic acquisition system. The design of mechanical structure part of the device refer to optical axis design, drive part, fixture device and wheel design. The design of control system of the device refer to hardware design and software design, and the hardware mainly uses singlechip system, and the software design is the process of the photoelectric autocollimator and the automatic data acquisition process. This devices can automated achieve vertical measurement data. The reliability of the device is verified by experimental comparison. The conclusion meets the requirement of the right angle test procedure.

Identifying Requirements for Effective Human-Automation Teamwork

Energy Technology Data Exchange (ETDEWEB)

Jeffrey C. Joe; John O' Hara; Heather D. Medema; Johanna H. Oxstrand

2014-06-01

Previous studies have shown that poorly designed human-automation collaboration, such as poorly designed communication protocols, often leads to problems for the human operators, such as: lack of vigilance, complacency, and loss of skills. These problems often lead to suboptimal system performance. To address this situation, a considerable amount of research has been conducted to improve human-automation collaboration and to make automation function better as a “team player.” Much of this research is based on an understanding of what it means to be a good team player from the perspective of a human team. However, the research is often based on a simplified view of human teams and teamwork. In this study, we sought to better understand the capabilities and limitations of automation from the standpoint of human teams. We first examined human teams to identify the principles for effective teamwork. We next reviewed the research on integrating automation agents and human agents into mixed agent teams to identify the limitations of automation agents to conform to teamwork principles. This research resulted in insights that can lead to more effective human-automation collaboration by enabling a more realistic set of requirements to be developed based on the strengths and limitations of all agents.

Automated Critical PeakPricing Field Tests: 2006 Pilot ProgramDescription and Results

Energy Technology Data Exchange (ETDEWEB)

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila

2007-06-19

During 2006 Lawrence Berkeley National Laboratory (LBNL) and the Demand Response Research Center (DRRC) performed a technology evaluation for the Pacific Gas and Electric Company (PG&E) Emerging Technologies Programs. This report summarizes the design, deployment, and results from the 2006 Automated Critical Peak Pricing Program (Auto-CPP). The program was designed to evaluate the feasibility of deploying automation systems that allow customers to participate in critical peak pricing (CPP) with a fully-automated response. The 2006 program was in operation during the entire six-month CPP period from May through October. The methodology for this field study included site recruitment, control strategy development, automation system deployment, and evaluation of sites' participation in actual CPP events through the summer of 2006. LBNL recruited sites in PG&E's territory in northern California through contacts from PG&E account managers, conferences, and industry meetings. Each site contact signed a memorandum of understanding with LBNL that outlined the activities needed to participate in the Auto-CPP program. Each facility worked with LBNL to select and implement control strategies for demand response and developed automation system designs based on existing Internet connectivity and building control systems. Once the automation systems were installed, LBNL conducted communications tests to ensure that the Demand Response Automation Server (DRAS) correctly provided and logged the continuous communications of the CPP signals with the energy management and control system (EMCS) for each site. LBNL also observed and evaluated Demand Response (DR) shed strategies to ensure proper commissioning of controls. The communication system allowed sites to receive day-ahead as well as day-of signals for pre-cooling, a DR strategy used at a few sites. Measurement of demand response was conducted using two different baseline models for estimating peak load savings. One

CNA/CNS conference summaries

International Nuclear Information System (INIS)

1992-01-01

This volume contains summaries of papers presented at the 32. annual conference of the Canadian Nuclear Association and the 13. annual conference of the Canadian Nuclear Society. The full proceedings, and the individual papers contained therein, have been abstracted separately. Sessions on the following topics are included: Plenary; The international CANDU program; Canadian used fuel management program; Public information advocates; Fuel and electricity supply; In which direction should reactors advance?; Canadian advanced nuclear research program; International cooperation in operations; Safety in design, operation, regulation; Renovation of operating stations; Reactor physics; New concepts and Technology; Fuel behaviour; Reactor design; Safety analysis; Fuel channel behaviour; Equipment and design qualification; Compliance and licensing; Fusion science and technology; Darlington assessment; Plant aging and life assessment; Thermalhydraulic modelling and analysis; Diagnostics and data management; Operator training and certification

Automated x-ray inspection of composites at northrop aircraft

International Nuclear Information System (INIS)

Murphy, W.J. Jr.; Nutter, R.L.; Patricelli, F.

1985-01-01

The Northrop automated x-ray inspection system (AXIS) has evolved from a research and development program initiated in 1981 to reduce increasing inspection costs; and reduce inspection times to stay abreast with increasing F/A-18A production. The goal of the program was to develop an automated production system that would meet existing inspection requirements; automate handling and alignment; and replace film for the inspection of F/A-18A composite assemblies and laminates. Originally, the program was supported completely by Northrop internal finding. However in 1984 it became part of the Navy Industrial Modernization Incentive Program (IMIP) with joint funding. The program was selected by the Navy because of its great potential to reduce and stabilize costs associated with F/A-18A inspections. Currently the AXIS is in the last stage of development with final integration expected by the end of July 1985 and production implementation by the end of the year. This paper briefly describes the equipment, and operation of the AXIS. Slides will be presented at the conference which will further illustrate the system; including inspection results

Report of the workshop on Aviation Safety/Automation Program

Science.gov (United States)

Morello, Samuel A. (Editor)

1990-01-01

As part of NASA's responsibility to encourage and facilitate active exchange of information and ideas among members of the aviation community, an Aviation Safety/Automation workshop was organized and sponsored by the Flight Management Division of NASA Langley Research Center. The one-day workshop was held on October 10, 1989, at the Sheraton Beach Inn and Conference Center in Virginia Beach, Virginia. Participants were invited from industry, government, and universities to discuss critical questions and issues concerning the rapid introduction and utilization of advanced computer-based technology into the flight deck and air traffic controller workstation environments. The workshop was attended by approximately 30 discipline experts, automation and human factors researchers, and research and development managers. The goal of the workshop was to address major issues identified by the NASA Aviation Safety/Automation Program. Here, the results of the workshop are documented. The ideas, thoughts, and concepts were developed by the workshop participants. The findings, however, have been synthesized into a final report primarily by the NASA researchers.

Papers of the 2005 PSAC spring conference

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

Workplace safety and personnel management issues facing the petroleum industry were addressed at this conference. As a learning event for petroleum service company personnel, it focused on providing delegates with the most current information and training issues affecting the petroleum service industry. A broad range of topics were presented under the 3 key areas of transportation operations, transportation management and human capital management. Issues pertaining to transportation operations included vehicle monitoring systems; journey management; GPS technology; nutritional health; resolving issues with difficult people; workplace safety; initiatives in back pain; and heavy hauling. Issues pertaining to transportation management included workers rights and responsibilities; ethical choices; and compliance management through automation. Issues pertaining to human capital management included work-life balance; sourcing employees; risk management in hiring practices; employee attitudes; drug use at work; and personnel management. The conference featured 29 presentations of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs.

Design and Development of a Robot-Based Automation System for Cryogenic Crystal Sample Mounting at the Advanced Photon Source

International Nuclear Information System (INIS)

Shu, D.; Preissner, C.; Nocher, D.; Han, Y.; Barraza, J.; Lee, P.; Lee, W.-K.; Cai, Z.; Ginell, S.; Alkire, R.; Lazarski, K.; Schuessler, R.; Joachimiak, A.

2004-01-01

X-ray crystallography is the primary method to determine the 3D structures of complex macromolecules at high resolution. In the years to come, the Advanced Photon Source (APS) and similar 3rd-generation synchrotron sources elsewhere will become the most powerful tools for studying atomic structures of biological molecules. One of the major bottlenecks in the x-ray data collection process is the constant need to change and realign the crystal sample. This is a very time- and manpower-consuming task. An automated sample mounting system will help to solve this bottleneck problem. We have developed a novel robot-based automation system for cryogenic crystal sample mounting at the APS. Design of the robot-based automation system, as well as its on-line test results at the Argonne Structural Biology Center (SBC) 19-BM experimental station, are presented in this paper

Current advances in mechanical design and production VII: proceedings of the Seventh Cairo University International MDP Conference ; Cairo-Egypt, February 15-17, 2000

National Research Council Canada - National Science Library

Megahed, Säıd M; Hassan, Mohamed F

2000-01-01

... with keynote papers to enrich the sessions and to highlight the recent advances on the various fields of mechanical design and production. A total of 160 papers were submitted to MDP-7 conference from more than 21 countries from the 6 continents. All papers were thoroughly refereed by the conference scientific committee. Following the reviewing proces...

User interface design principles for the SSM/PMAD automated power system

International Nuclear Information System (INIS)

Jakstas, L.M.; Myers, C.J.

1991-01-01

Computer-human interfaces are an integral part of developing software for spacecraft power systems. A well designed and efficient user interface enables an engineer to effectively operate the system, while it concurrently prevents the user from entering data which is beyond boundary conditions or performing operations which are out of context. A user interface should also be designed to ensure that the engineer easily obtains all useful and critical data for operating the system and is aware of all faults and states in the system. Martin Marietta, under contract to NASA George C. Marshall Space Flight Center, has developed a user interface for the Space Station Module Power Management and Distribution (SSM/PMAD) automated power system testbed which provides human access to the functionality of the power system, as well as exemplifying current techniques in user interface design. The testbed user interface was designed to enable an engineer to operate the system easily without having significant knowledge of computer systems, as well as provide an environment in which the engineer can monitor and interact with the SSM/PMAD system hardware. The design of the interface supports a global view of the most important data form the various hardware and software components, as well as enabling the user to obtain additional or more detailed data when needed. The components and representations of the SSM/PMAD testbed user interface are examined in this paper. An engineer's interactions with the system are also described

Automated Design of Noise-Minimal, Safe Rotorcraft Trajectories

Science.gov (United States)

Morris, Robert A.; Venable, K. Brent; Lindsay, James

2012-01-01

NASA and the international community are investing in the development of a commercial transportation infrastructure that includes the increased use of rotorcraft, specifically helicopters and aircraft such as a 40-passenger civil tilt rotors. Rotorcraft have a number of advantages over fixed wing aircraft, primarily in not requiring direct access to the primary fixed wing runways. As such they can operate at an airport without directly interfering with major air carrier and commuter aircraft operations. However, there is significant concern over the impact of noise on the communities surrounding the transportation facilities. In this paper we propose to address the rotorcraft noise problem by exploiting powerful search techniques coming from artificial intelligence, coupled with simulation and field tests, to design trajectories that are expected to improve on the amount of ground noise generated. This paper investigates the use of simulation based on predictive physical models to facilitate the search for low-noise trajectories using a class of automated search algorithms called local search. A novel feature of this approach is the ability to incorporate constraints into the problem formulation that addresses passenger safety and comfort.

Fifth CNS international steam generator conference

International Nuclear Information System (INIS)

2006-01-01

The Fifth CNS International Steam Generator Conference was held on November 26-29, 2006 in Toronto, Ontario, Canada. In contrast with other conferences which focus on specific aspects, this conference provided a wide ranging forum on nuclear steam generator technology from life-cycle management to inspection and maintenance, functional and structural performance characteristics to design architecture. The 5th conference has adopted the theme: 'Management of Real-Life Equipment Conditions and Solutions for the Future'. This theme is appropriate at a time of transition in the industry when plants are looking to optimize the performance of existing assets, prevent costly degradation and unavailability, while looking ahead for new steam generator investments in life-extension, replacements and new-build. More than 50 technical papers were presented in sessions that gave an insight to the scope: life management strategies; fouling, cleaning and chemistry; replacement strategies and new build design; materials degradation; condition assessment/fitness for service; inspection advancements and experience; and thermal hydraulic performance

Conference summaries

International Nuclear Information System (INIS)

1983-01-01

The papers presented at this conference cover the fields of thermalhydraulics, nuclear plant design and operation, licensing, decontamination, restoration and dismantling of nuclear power facilities, services to the nuclear industry, new applications of nuclear technology, reactor physics and fuel cycles, accelerator-breeders, fusion research and lasers

Bioprocessing automation in cell therapy manufacturing: Outcomes of special interest group automation workshop.

Science.gov (United States)

Ball, Oliver; Robinson, Sarah; Bure, Kim; Brindley, David A; Mccall, David

2018-04-01

Phacilitate held a Special Interest Group workshop event in Edinburgh, UK, in May 2017. The event brought together leading stakeholders in the cell therapy bioprocessing field to identify present and future challenges and propose potential solutions to automation in cell therapy bioprocessing. Here, we review and summarize discussions from the event. Deep biological understanding of a product, its mechanism of action and indication pathogenesis underpin many factors relating to bioprocessing and automation. To fully exploit the opportunities of bioprocess automation, therapeutics developers must closely consider whether an automation strategy is applicable, how to design an 'automatable' bioprocess and how to implement process modifications with minimal disruption. Major decisions around bioprocess automation strategy should involve all relevant stakeholders; communication between technical and business strategy decision-makers is of particular importance. Developers should leverage automation to implement in-process testing, in turn applicable to process optimization, quality assurance (QA)/ quality control (QC), batch failure control, adaptive manufacturing and regulatory demands, but a lack of precedent and technical opportunities can complicate such efforts. Sparse standardization across product characterization, hardware components and software platforms is perceived to complicate efforts to implement automation. The use of advanced algorithmic approaches such as machine learning may have application to bioprocess and supply chain optimization. Automation can substantially de-risk the wider supply chain, including tracking and traceability, cryopreservation and thawing and logistics. The regulatory implications of automation are currently unclear because few hardware options exist and novel solutions require case-by-case validation, but automation can present attractive regulatory incentives. Copyright © 2018 International Society for Cellular Therapy

Automations influence on nuclear power plants: a look at three accidents and how automation played a role.

Science.gov (United States)

Schmitt, Kara

2012-01-01

Nuclear power is one of the ways that we can design an efficient sustainable future. Automation is the primary system used to assist operators in the task of monitoring and controlling nuclear power plants (NPP). Automation performs tasks such as assessing the status of the plant's operations as well as making real time life critical situational specific decisions. While the advantages and disadvantages of automation are well studied in variety of domains, accidents remind us that there is still vulnerability to unknown variables. This paper will look at the effects of automation within three NPP accidents and incidents and will consider why automation failed in preventing these accidents from occurring. It will also review the accidents at the Three Mile Island, Chernobyl, and Fukushima Daiichi NPP's in order to determine where better use of automation could have resulted in a more desirable outcome.

Designing of smart home automation system based on Raspberry Pi

Science.gov (United States)

Saini, Ravi Prakash; Singh, Bhanu Pratap; Sharma, Mahesh Kumar; Wattanawisuth, Nattapol; Leeprechanon, Nopbhorn

2016-03-01

Locally networked or remotely controlled home automation system becomes a popular paradigm because of the numerous advantages and is suitable for academic research. This paper proposes a method for an implementation of Raspberry Pi based home automation system presented with an android phone access interface. The power consumption profile across the connected load is measured accurately through programming. Users can access the graph of total power consumption with respect to time worldwide using their Dropbox account. An android application has been developed to channelize the monitoring and controlling operation of home appliances remotely. This application facilitates controlling of operating pins of Raspberry Pi by pressing the corresponding key for turning "on" and "off" of any desired appliance. Systems can range from the simple room lighting control to smart microcontroller based hybrid systems incorporating several other additional features. Smart home automation systems are being adopted to achieve flexibility, scalability, security in the sense of data protection through the cloud-based data storage protocol, reliability, energy efficiency, etc.

Controls and automation in the SPIRAL project

International Nuclear Information System (INIS)

Bothner, U.; Boulot, A.; Maherault, J.; Martial, L.

1999-01-01

The control and automation team of the R and D of Accelerator-Exotic Beam Department has had in the framework of SPIRAL collaboration the following tasks: 1. automation of the resonator high frequency equipment of the CIME cyclotron; 2. automation of the vacuum equipment, i.e. the low energy line (TBE), the CIME cyclotron, the low energy line (BE); 3. automation of load safety for power supply; 4. for each of these tasks a circuitry file based on the SCHEMA software has been worked out. The programs required in the automation of load safety for power supply (STEP5, PROTOOL, DESIGNER 4.1) were developed and implemented for PC

49 CFR 238.445 - Automated monitoring.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Automated monitoring. 238.445 Section 238.445... Equipment § 238.445 Automated monitoring. (a) Each passenger train shall be equipped to monitor the... limiting the speed of the train. (c) The monitoring system shall be designed with an automatic self-test...

International Conference on Systems, Control and Information Technologies 2016

CERN Document Server

Kaliczyńska, Małgorzata

2017-01-01

This book presents the proceedings of the International Conference on Systems, Control and Information Technologies 2016. It includes research findings from leading experts in the fields connected with INDUSTRY 4.0 and its implementation, especially: intelligent systems, advanced control, information technologies, industrial automation, robotics, intelligent sensors, metrology and new materials. Each chapter offers an analysis of a specific technical problem followed by a numerical analysis and simulation as well as the implementation for the solution of a real-world problem.

Development and Evaluation of a Measure of Library Automation.

Science.gov (United States)

Pungitore, Verna L.

1986-01-01

Construct validity and reliability estimates indicate that study designed to measure utilization of automation in public and academic libraries was successful in tentatively identifying and measuring three subdimensions of level of automation: quality of hardware, method of software development, and number of automation specialists. Questionnaire…

Microbicides 2006 conference

Directory of Open Access Journals (Sweden)

McGowan Ian

2006-10-01

Full Text Available Abstract Current HIV/AIDS statistics show that women account for almost 60% of HIV infections in Sub-Saharan Africa. HIV prevention tools such as male and female condoms, abstinence and monogamy are not always feasible options for women due to various socio-economic and cultural factors. Microbicides are products designed to be inserted in the vagina or rectum prior to sex to prevent HIV acquisition. The biannual Microbicides conference took place in Cape Town, South Africa from 23–26 April 2006. The conference was held for the first time on the African continent, the region worst affected by the HIV/AIDS pandemic. The conference brought together a record number of 1,300 scientists, researchers, policy makers, healthcare workers, communities and advocates. The conference provided an opportunity for an update on microbicide research and development as well as discussions around key issues such as ethics, acceptability, access and community involvement. This report discusses the current status of microbicide research and development, encompassing basic and clinical science, social and behavioural science, and community mobilisation and advocacy activities.

An automated digital imaging system for environmental monitoring applications

Science.gov (United States)

Bogle, Rian; Velasco, Miguel; Vogel, John

2013-01-01

Recent improvements in the affordability and availability of high-resolution digital cameras, data loggers, embedded computers, and radio/cellular modems have advanced the development of sophisticated automated systems for remote imaging. Researchers have successfully placed and operated automated digital cameras in remote locations and in extremes of temperature and humidity, ranging from the islands of the South Pacific to the Mojave Desert and the Grand Canyon. With the integration of environmental sensors, these automated systems are able to respond to local conditions and modify their imaging regimes as needed. In this report we describe in detail the design of one type of automated imaging system developed by our group. It is easily replicated, low-cost, highly robust, and is a stand-alone automated camera designed to be placed in remote locations, without wireless connectivity.

Conference scene: DGVS spring conference 2009.

Science.gov (United States)

Kolligs, Frank Thomas

2009-10-01

The 3rd annual DGVS Spring Conference of the German Society for Gastroenterology (Deutsche Gesellschaft für Verdauungs- und Stoffwechselkrankheiten) was held at the Seminaris Campus Hotel in Berlin, Germany, on 8-9 May, 2009. The conference was organized by Roland Schmid and Matthias Ebert from the Technical University of Munich, Germany. The central theme of the meeting was 'translational gastrointestinal oncology: towards personalized medicine and individualized therapy'. The conference covered talks on markers for diagnosis, screening and surveillance of colorectal cancer, targets for molecular therapy, response prediction in clinical oncology, development and integration of molecular imaging in gastrointestinal oncology and translational research in clinical trial design. Owing to the broad array of topics and limitations of space, this article will focus on biomarkers, response prediction and the integration of biomarkers into clinical trials. Presentations mentioned in this summary were given by Matthias Ebert (Technical University of Munich, Germany), Esmeralda Heiden (Epigenomics, Berlin, Germany), Frank Kolligs (University of Munich, Germany), Florian Lordick (University of Heidelberg, Germany), Hans Jorgen Nielsen (University of Copenhagen, Denmark), Anke Reinacher-Schick (University of Bochum, Germany), Christoph Röcken (University of Berlin, Germany), Wolff Schmiegel (University of Bochum, Germany) and Thomas Seufferlein (University of Halle, Germany).

Fifth Ovarian Cancer Consensus Conference of the Gynecologic Cancer InterGroup (GCIG): clinical trial design for rare ovarian tumours

NARCIS (Netherlands)

Leary, A. F.; Quinn, M.; Fujiwara, K.; Coleman, R. L.; Kohn, E.; Sugiyama, T.; Glasspool, R.; Ray-Coquard, I.; Colombo, N.; Bacon, M.; Zeimet, A.; Westermann, A.; Gomez-Garcia, E.; Provencher, D.; Welch, S.; Small, W.; Millan, D.; Okamoto, A.; Stuart, G.; Ochiai, K.

2017-01-01

This manuscript reports the consensus statements on designing clinical trials in rare ovarian tumours reached at the fifth Ovarian Cancer Consensus Conference (OCCC) held in Tokyo, November 2015. Three important questions were identified concerning rare ovarian tumours (rare epithelial ovarian

Conference Scene: Personalized Medicine comes to Harvard.

Science.gov (United States)

Greenberg, Tarryn

2012-01-01

The Seventh Annual Harvard Personalized Medicine Conference was held at The Joseph B Martin Conference Center at the Harvard Medical School in Boston, MA, USA on the 9-10 November 2011. The 2-day conference program was designed to highlight the impact that personalized medicine is currently making clinically as it enters the healthcare delivery system. Going forward, policies, plans and actions of stakeholders including those from government, academia and the private sector need to be informed and guided by recent experience - all of which the conference program set out to explore. The conference attracted over 600 national and international thought leaders all involved in personalized healthcare.

International conference on design, fabrication and economy of metal structures

CERN Document Server

Farkas, József

2013-01-01

These are the proceedings of the International Conference on Design, Fabrication and Economy of Metal Structures held on 24-26 April 2013 in Miskolc, Hungary which contain 99 papers covering: Structural optimization Thin-walled structures Stability Fatigue Frames Fire Fabrication Welding technology Applications Steel-concrete composite Special problems The authors are from 23 different countries, ensuring that the themes covered are of worldwide interest and importance. The International Institute of Welding (IIW), the International Society of Structural and Multidisciplinary Optimization (ISSMO), the TÁMOP 4.2.1.B-10/2/KONV-2010-0001 project entitled “Increasing the quality of higher education through the development of research - development and innovation program at the University of Miskolc supported by the European Union, co-financed by the European Social Fund” and many other sponsors helped organizers to collect these valuable studies, the results of which will provoke discussion, and provide an i...

Dual-Use Space Technology Transfer Conference and Exhibition. Volume 2

Science.gov (United States)

Krishen, Kumar (Compiler)

1994-01-01

This is the second volume of papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools; systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development; perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; and robotics technologies.

Participative Action Research: The Vision Conference

Directory of Open Access Journals (Sweden)

René Victor Valqui Vidal

2003-11-01

Full Text Available This paper presents the principles behind the design and management of the Vision Conference: a one-day workshop for a large group of participants endeavoured to create ideas, projects and visions for the future activities of a local community or an organisation. A case study from a local community in Denmark is also presented with the purpose of illustrating the organisation, planning and management of a Vision Conference. The paper focuses in the three central social processes of the conference: group work, problem solving and facilitation. The paper ends with a discussion of creativity and creativity techniques suitable for Vision Conferences.

Chicago particle accelerator conference

International Nuclear Information System (INIS)

Southworth, Brian

1989-01-01

Naturally, emphasis at the Particle Accelerator Conference in Chicago in March was on work in the US, just as the newly instituted European Particle Accelerator Conference places emphasis on work in the 'old continent'. All will come together at the international conference in Japan in August. The proposed US Superconducting Supercollider (SSC) was highlighted in the opening talk at Chicago. Progress on this inchoate project to explore the TeV (1000 GeV) energy region by colliding 20 TeV proton beams was reported by the recently-appointed Director of the SSC Laboratory, Roy Schwitters. He reviewed the physics challenges and described progress and plans towards full authorization of construction.This year, the SSC conceptual design will be transformed into a 'site specific' report, now that the location at Waxahachie in Ellis County, Texas, has been selected. The Central Design Group, based in Berkeley for the past few years, will soon move to the Waxahachie region. The top management structure is taking shape and an International Advisory Committee is being formed

Chicago particle accelerator conference

Energy Technology Data Exchange (ETDEWEB)

Southworth, Brian

1989-06-15

Naturally, emphasis at the Particle Accelerator Conference in Chicago in March was on work in the US, just as the newly instituted European Particle Accelerator Conference places emphasis on work in the 'old continent'. All will come together at the international conference in Japan in August. The proposed US Superconducting Supercollider (SSC) was highlighted in the opening talk at Chicago. Progress on this inchoate project to explore the TeV (1000 GeV) energy region by colliding 20 TeV proton beams was reported by the recently-appointed Director of the SSC Laboratory, Roy Schwitters. He reviewed the physics challenges and described progress and plans towards full authorization of construction.This year, the SSC conceptual design will be transformed into a 'site specific' report, now that the location at Waxahachie in Ellis County, Texas, has been selected. The Central Design Group, based in Berkeley for the past few years, will soon move to the Waxahachie region. The top management structure is taking shape and an International Advisory Committee is being formed.

Automated control system for the Temelin nuclear power plant

International Nuclear Information System (INIS)

Labik, V.

1990-01-01

Instrumentation of the automated control system of the Temelin nuclear power plant in the section of the main production unit and of the major auxiliary equipment is described, the results of testing are reported, and the present status of design activities is assessed. The suitability of application of Czechoslovak automation facilities to the instrumentation of the automated control system of the power plant was confirmed by the Soviet designer and supplier based on favorable results of polygonal testing. Capacity problems in the development of the designs and user software are alleviated by extensive cooperation. It is envisaged that all tasks will be fulfilled as planned. (P.A.). 1 fig., 5 refs

International Conference On Automation, Full Employment, and a Balanced Economy (Rome, Italy, 1967).

Science.gov (United States)

American Foundation on Automation and Employment, Inc., New York, NY.

Three nations, Great Britain, Sweden, and the United States, participated in the conference with representatives from management, trade unions, government, academic institutions, and interested observers. The International Labor Office and the Organization for Economic Cooperation and Development also participated. Speakers from each of the three…

Ontology-Based Device Descriptions and Device Repository for Building Automation Devices

Directory of Open Access Journals (Sweden)

Dibowski Henrik

2011-01-01

Full Text Available Device descriptions play an important role in the design and commissioning of modern building automation systems and help reducing the design time and costs. However, all established device descriptions are specialized for certain purposes and suffer from several weaknesses. This hinders a further design automation, which is strongly needed for the more and more complex building automation systems. To overcome these problems, this paper presents novel Ontology-based Device Descriptions (ODDs along with a layered ontology architecture, a specific ontology view approach with virtual properties, a generic access interface, a triple store-based database backend, and a generic search mask GUI with underlying query generation algorithm. It enables a formal, unified, and extensible specification of building automation devices, ensures their comparability, and facilitates a computer-enabled retrieval, selection, and interoperability evaluation, which is essential for an automated design. The scalability of the approach to several ten thousand devices is demonstrated.

Reclamation with a purpose. Proceedings of a joint conference of ASMR 19th annual national conference and IALR 6th international conference

Energy Technology Data Exchange (ETDEWEB)

Barnhisel, R.; Collins, M. (eds.) [American Society of Mining and Reclamation, Lexington, KY (United States)

2002-07-01

The conference covers the following topics: ecology; forestry and wildlife; geotechnical engineering; inter, tailing and reclamation; land use planning and design; soils and overburden and water management.

Proceedings of Synthetic Biology: Engineering, Evolution and Design (SEED) Conference 2015

Energy Technology Data Exchange (ETDEWEB)

Silver, Pamela [Harvard Univ., Cambridge, MA (United States); SEED 2015 Conference Chair; Flach, Evan [American Institute of Chemical Engineers; SEED 2015 Conference Organizer

2016-10-27

Synthetic Biology is an emerging discipline that seeks to accelerate the process of engineering biology. As such, the tools are broadly applicable to application areas, including chemicals and biofuels, materials, medicine and agriculture. A characteristic of the field is to look holistically at cellular design, from sensing and genetic circuitry to the manipulation of cellular processes and actuators, to controlling metabolism, to programming multicellular behaviors. Further, the types of cells that are manipulated are broad, from in vitro systems to microbes and fungi to mammalian and plant cells and living animals. Many of the projects in synthetic biology seek to move biochemical functions across organisms. The field is highly interdisciplinary with faculty and students spread across departments that focus on engineering (biological, chemical, electrical, mechanical, civil, computer science) and basic science (biology and systems biology, chemistry, physics). While there have been many one-off workshops and meeting on synthetic biology, the 2014 Synthetic Biology: Engineering, Evolution and Design (SEED) was the first of an annual conference series that serves as a reliable place to pull together the involved disciplines in order to organize and exchange advances in the science and technology in the field. Further, the SEED conferences have a strong focus on industry, with many companies represented and actively participating. A number of these companies have started major efforts in synthetic biology including large companies (e.g., Pfizer, Novartis, Dow, Dupont, BP, Total), smaller companies have recently gone public (e.g., Amyris, Gevo, Intrexon), and many start-ups (e.g., Teslagen, Refactored Materials, Pivot, Genomatica). There are a number of loosely affiliated Synthetic Biology Centers, including ones at MIT, Boston University, UCSD, UCSF, UC-Berkeley, Imperial College, Oxford, and ETH. SEED 2015 will serve as the primary meeting at which international

Design of a novel automated methanol feed system for pilot-scale fermentation of Pichia pastoris.

Science.gov (United States)

Hamaker, Kent H; Johnson, Daniel C; Bellucci, Joseph J; Apgar, Kristie R; Soslow, Sherry; Gercke, John C; Menzo, Darrin J; Ton, Christopher

2011-01-01

Large-scale fermentation of Pichia pastoris requires a large volume of methanol feed during the induction phase. However, a large volume of methanol feed is difficult to use in the processing suite because of the inconvenience of constant monitoring, manual manipulation steps, and fire and explosion hazards. To optimize and improve safety of the methanol feed process, a novel automated methanol feed system has been designed and implemented for industrial fermentation of P. pastoris. Details of the design of the methanol feed system are described. The main goals of the design were to automate the methanol feed process and to minimize the hazardous risks associated with storing and handling large quantities of methanol in the processing area. The methanol feed system is composed of two main components: a bulk feed (BF) system and up to three portable process feed (PF) systems. The BF system automatically delivers methanol from a central location to the portable PF system. The PF system provides precise flow control of linear, step, or exponential feed of methanol to the fermenter. Pilot-scale fermentations with linear and exponential methanol feeds were conducted using two Mut(+) (methanol utilization plus) strains, one expressing a recombinant therapeutic protein and the other a monoclonal antibody. Results show that the methanol feed system is accurate, safe, and efficient. The feed rates for both linear and exponential feed methods were within ± 5% of the set points, and the total amount of methanol fed was within 1% of the targeted volume. Copyright © 2011 American Institute of Chemical Engineers (AIChE).

The Influence of Cultural Factors on Trust in Automation

Science.gov (United States)

Chien, Shih-Yi James

2016-01-01

Human interaction with automation is a complex process that requires both skilled operators and complex system designs to effectively enhance overall performance. Although automation has successfully managed complex systems throughout the world for over half a century, inappropriate reliance on automation can still occur, such as the recent…

35th International Conference of High Energy Physics

Science.gov (United States)

The French particle physics community is particularly proud to have been selected to host the 35th ICHEP conference in 2010 in Paris. This conference is the focal point of all our field since more than fifty years and is the reference event where all important results in particle physics cosmology and astroparticles are presented and discussed. This alone suffices to make this event very important. But in 2010, a coincidence of exceptional events will make this conference even more attractive! What is then so special about ICHEP 2010 conference? It will be the first ICHEP conference where physics results obtained at the LHC will be presented! New results about the elusive Higgs boson, or signals of physics beyond the standard model might therefore be announced at this conference! Major discoveries in other domains such as gravitational waves, neutrino telescopes, neutrino oscillations, dark matter or in the flavour sector are also possible, just to name a few. In addition , 2010 will be an important date to shape up the future of our field. Several major projects will present the status of their Conceptual or Engineering Design Reports during the conference. The International Linear Collider (ILC) Global Design Effort team will present the report corresponding to the end of their Technical Design Phase 1. The Compact Linear Collider (CLIC) will also report on its Conceptual Design Report. Other major projects such as Super B factories will also be presented. These reports together with LHC physics results will form the basis for key political decisions needed to be taken in the years to come. In summary, there can be no doubt that Paris is the place to be in summer 2010 for anyone interested in High Energy Physics and we will make every effort to make your stay as interesting and enjoyable as possible.

Aviation safety and automation technology for subsonic transports

Science.gov (United States)

Albers, James A.

1991-01-01

Discussed here are aviation safety human factors and air traffic control (ATC) automation research conducted at the NASA Ames Research Center. Research results are given in the areas of flight deck and ATC automations, displays and warning systems, crew coordination, and crew fatigue and jet lag. Accident investigation and an incident reporting system that is used to guide the human factors research is discussed. A design philosophy for human-centered automation is given, along with an evaluation of automation on advanced technology transports. Intelligent error tolerant systems such as electronic checklists are discussed along with design guidelines for reducing procedure errors. The data on evaluation of Crew Resource Management (CRM) training indicates highly significant positive changes in appropriate flight deck behavior and more effective use of available resources for crew members receiving the training.

In silico design and functional assessment of semisynthetic genes that confer tolerance to phosphinothricin

Directory of Open Access Journals (Sweden)

Jenny Paola Jiménez

2016-07-01

Full Text Available Herbicide tolerance is one of the features most used in GM crops, which has shown positive results for farmers and the environment. The starting point is the development of expression cassettes that express the characteristic of interest, they are initially constructed by standard molecular biology techniques. Currently, by bioinformatics and synthetic biology tools, it is possible to design and test the construct in silico, and then hire their synthesis. This approach allows optimizing expression by modifying the codon usage. In this work there were designed and evaluated semi-synthetic versions of genes in Nicotiana benthamiana, these genes confer tolerance to the herbicide phosphinothricin. It was made an analysis of freedom to operate in order to ensure that the designed constructs not violate intellectual property in Colombia. There were obtained two expression cassettes with freedom to operate, which express versions of the bar gene.

Operating procedure automation to enhance safety of nuclear power plants

International Nuclear Information System (INIS)

Husseiny, A.A.; Sabri, Z.A.; Adams, S.K.; Rodriguez, R.J.; Packer, D.; Holmes, J.W.

1989-01-01

Use of logic statements and computer assist are explored as means for automation and improvement on design of operating procedures including those employed in abnormal and emergency situations. Operating procedures for downpower and loss of forced circulation are used for demonstration. Human-factors analysis is performed on generic emergency operating procedures for three strategies of control; manual, semi-automatic and automatic, using standard emergency operating procedures. Such preliminary analysis shows that automation of procedures is feasible provided that fault-tolerant software and hardware become available for design of the controllers. Recommendations are provided for tests to substantiate the promise of enhancement of plant safety. Adequate design of operating procedures through automation may alleviate several major operational problems of nuclear power plants. Also, automation of procedures is necessary for partial or overall automatic control of plants. Fully automatic operations are needed for space applications while supervised automation of land-based and offshore plants may become the thrust of new generation of nulcear power plants. (orig.)

Designing of smart home automation system based on Raspberry Pi

International Nuclear Information System (INIS)

Saini, Ravi Prakash; Singh, Bhanu Pratap; Sharma, Mahesh Kumar; Wattanawisuth, Nattapol; Leeprechanon, Nopbhorn

2016-01-01

Locally networked or remotely controlled home automation system becomes a popular paradigm because of the numerous advantages and is suitable for academic research. This paper proposes a method for an implementation of Raspberry Pi based home automation system presented with an android phone access interface. The power consumption profile across the connected load is measured accurately through programming. Users can access the graph of total power consumption with respect to time worldwide using their Dropbox account. An android application has been developed to channelize the monitoring and controlling operation of home appliances remotely. This application facilitates controlling of operating pins of Raspberry Pi by pressing the corresponding key for turning “on” and “off” of any desired appliance. Systems can range from the simple room lighting control to smart microcontroller based hybrid systems incorporating several other additional features. Smart home automation systems are being adopted to achieve flexibility, scalability, security in the sense of data protection through the cloud-based data storage protocol, reliability, energy efficiency, etc.

Designing of smart home automation system based on Raspberry Pi

Energy Technology Data Exchange (ETDEWEB)

Saini, Ravi Prakash; Singh, Bhanu Pratap [B K Birla Institute of Engineering & Technology, Pilani, Rajasthan (India); Sharma, Mahesh Kumar; Wattanawisuth, Nattapol; Leeprechanon, Nopbhorn, E-mail: Dr.N.L@ieee.org [Thammasat University, Rangsit Campus, Pathum Thani (Thailand)

2016-03-09

Locally networked or remotely controlled home automation system becomes a popular paradigm because of the numerous advantages and is suitable for academic research. This paper proposes a method for an implementation of Raspberry Pi based home automation system presented with an android phone access interface. The power consumption profile across the connected load is measured accurately through programming. Users can access the graph of total power consumption with respect to time worldwide using their Dropbox account. An android application has been developed to channelize the monitoring and controlling operation of home appliances remotely. This application facilitates controlling of operating pins of Raspberry Pi by pressing the corresponding key for turning “on” and “off” of any desired appliance. Systems can range from the simple room lighting control to smart microcontroller based hybrid systems incorporating several other additional features. Smart home automation systems are being adopted to achieve flexibility, scalability, security in the sense of data protection through the cloud-based data storage protocol, reliability, energy efficiency, etc.

Systematic review automation technologies

Science.gov (United States)

2014-01-01

Systematic reviews, a cornerstone of evidence-based medicine, are not produced quickly enough to support clinical practice. The cost of production, availability of the requisite expertise and timeliness are often quoted as major contributors for the delay. This detailed survey of the state of the art of information systems designed to support or automate individual tasks in the systematic review, and in particular systematic reviews of randomized controlled clinical trials, reveals trends that see the convergence of several parallel research projects. We surveyed literature describing informatics systems that support or automate the processes of systematic review or each of the tasks of the systematic review. Several projects focus on automating, simplifying and/or streamlining specific tasks of the systematic review. Some tasks are already fully automated while others are still largely manual. In this review, we describe each task and the effect that its automation would have on the entire systematic review process, summarize the existing information system support for each task, and highlight where further research is needed for realizing automation for the task. Integration of the systems that automate systematic review tasks may lead to a revised systematic review workflow. We envisage the optimized workflow will lead to system in which each systematic review is described as a computer program that automatically retrieves relevant trials, appraises them, extracts and synthesizes data, evaluates the risk of bias, performs meta-analysis calculations, and produces a report in real time. PMID:25005128

International MultiConference of Engineers and Computer Scientists 2016

CERN Document Server

Kim, Haeng; Huang, Xu; Castillo, Oscar

2017-01-01

This volume contains selected revised and extended research articles written by prominent researchers who participated in the International MultiConference of Engineers and Computer Scientists 2016, held in Hong Kong, 16-18 March 2016. Topics covered include engineering physics, communications systems, control theory, automation, engineering mathematics, scientific computing, electrical engineering, and industrial applications. The book showcases the tremendous advances in engineering technologies and applications, and also serves as an excellent reference work for researchers and graduate students working on engineering technologies, physical sciences and their applications.

International Conference: Computer-Aided Design of High-Temperature Materials

National Research Council Canada - National Science Library

Kalia, Rajiv

1998-01-01

.... The conference was attended by experimental and computational materials scientists, and experts in high performance computing and communications from universities, government laboratories, and industries in the U.S., Europe, and Japan...

Manned spacecraft automation and robotics

Science.gov (United States)

Erickson, Jon D.

1987-01-01

The Space Station holds promise of being a showcase user and driver of advanced automation and robotics technology. The author addresses the advances in automation and robotics from the Space Shuttle - with its high-reliability redundancy management and fault tolerance design and its remote manipulator system - to the projected knowledge-based systems for monitoring, control, fault diagnosis, planning, and scheduling, and the telerobotic systems of the future Space Station.

4th Isle of Thorns Conference

CERN Document Server

Hirschfeld, J; Jungnickel, D; Thas, J

2001-01-01

When? These are the proceedings of Finite Geometries, the Fourth Isle of Thorns Conference, which took place from Sunday 16 to Friday 21 July, 2000. It was organised by the editors of this volume. The Third Conference in 1990 was published as Advances in Finite Geometries and Designs by Oxford University Press and the Second Conference in 1980 was published as Finite Geometries and Designs by Cambridge University Press. The main speakers were A. R. Calderbank, P. J. Cameron, C. E. Praeger, B. Schmidt, H. Van Maldeghem. There were 64 participants and 42 contributions, all listed at the end of the volume. Conference web site http://www. maths. susx. ac. uk/Staff/JWPH/ Why? This collection of 21 articles describes the latest research and current state of the art in the following inter-linked areas: • combinatorial structures in finite projective and affine spaces, also known as Galois geometries, in which combinatorial objects such as blocking sets, spreads and partial spreads, ovoids, arcs and caps, as well a...

The Automation-by-Expertise-by-Training Interaction.

Science.gov (United States)

Strauch, Barry

2017-03-01

I introduce the automation-by-expertise-by-training interaction in automated systems and discuss its influence on operator performance. Transportation accidents that, across a 30-year interval demonstrated identical automation-related operator errors, suggest a need to reexamine traditional views of automation. I review accident investigation reports, regulator studies, and literature on human computer interaction, expertise, and training and discuss how failing to attend to the interaction of automation, expertise level, and training has enabled operators to commit identical automation-related errors. Automated systems continue to provide capabilities exceeding operators' need for effective system operation and provide interfaces that can hinder, rather than enhance, operator automation-related situation awareness. Because of limitations in time and resources, training programs do not provide operators the expertise needed to effectively operate these automated systems, requiring them to obtain the expertise ad hoc during system operations. As a result, many do not acquire necessary automation-related system expertise. Integrating automation with expected operator expertise levels, and within training programs that provide operators the necessary automation expertise, can reduce opportunities for automation-related operator errors. Research to address the automation-by-expertise-by-training interaction is needed. However, such research must meet challenges inherent to examining realistic sociotechnical system automation features with representative samples of operators, perhaps by using observational and ethnographic research. Research in this domain should improve the integration of design and training and, it is hoped, enhance operator performance.

Pilot opinions on high level flight deck automation issues: Toward the development of a design philosophy

Science.gov (United States)

Tenney, Yvette J.; Rogers, William H.; Pew, Richard W.

1995-01-01

There has been much concern in recent years about the rapid increase in automation on commercial flight decks. The survey was composed of three major sections. The first section asked pilots to rate different automation components that exist on the latest commercial aircraft regarding their obtrusiveness and the attention and effort required in using them. The second section addressed general 'automation philosophy' issues. The third section focused on issues related to levels and amount of automation. The results indicate that pilots of advanced aircraft like their automation, use it, and would welcome more automation. However, they also believe that automation has many disadvantages, especially fully autonomous automation. They want their automation to be simple and reliable and to produce predictable results. The biggest needs for higher levels of automation were in pre-flight, communication, systems management, and task management functions, planning as well as response tasks, and high workload situations. There is an irony and a challenge in the implications of these findings. On the one hand pilots would like new automation to be simple and reliable, but they need it to support the most complex part of the job--managing and planning tasks in high workload situations.

An Extended Case Study Methoology for Investigating Influence of Cultural, Organizational, and Automation Factors on Human-Automation Trust

Science.gov (United States)

Koltai, Kolina Sun; Ho, Nhut; Masequesmay, Gina; Niedober, David; Skoog, Mark; Johnson, Walter; Cacanindin, Artemio

2014-01-01

This paper discusses a case study that examined the influence of cultural, organizational and automation capability upon human trust in, and reliance on, automation. In particular, this paper focuses on the design and application of an extended case study methodology, and on the foundational lessons revealed by it. Experimental test pilots involved in the research and development of the US Air Forces newly developed Automatic Ground Collision Avoidance System served as the context for this examination. An eclectic, multi-pronged approach was designed to conduct this case study, and proved effective in addressing the challenges associated with the cases politically sensitive and military environment. Key results indicate that the system design was in alignment with pilot culture and organizational mission, indicating the potential for appropriate trust development in operational pilots. These include the low-vulnerabilityhigh risk nature of the pilot profession, automation transparency and suspicion, system reputation, and the setup of and communications among organizations involved in the system development.

VII international district heating conference

International Nuclear Information System (INIS)

1988-01-01

The proceedings of the 7th International District Heating Conference contain the full texts of the 89 presented papers of which 11 fall under the INIS Subject Scope. The conference met in seven sessions and dealt with the following problem areas: design and optimization of systems of district heating, integration of the power system and the district heating systems, cooperation of nuclear and fossil burning sources in district heating systems, the use of specific nuclear power plants for heating purposes, questions of the control of systems of district heating, the development of components of heating networks, the reliability and design of heat supply pipes. (Z.M.)

Configuring the Orion Guidance, Navigation, and Control Flight Software for Automated Sequencing

Science.gov (United States)

Odegard, Ryan G.; Siliwinski, Tomasz K.; King, Ellis T.; Hart, Jeremy J.

2010-01-01

The Orion Crew Exploration Vehicle is being designed with greater automation capabilities than any other crewed spacecraft in NASA s history. The Guidance, Navigation, and Control (GN&C) flight software architecture is designed to provide a flexible and evolvable framework that accommodates increasing levels of automation over time. Within the GN&C flight software, a data-driven approach is used to configure software. This approach allows data reconfiguration and updates to automated sequences without requiring recompilation of the software. Because of the great dependency of the automation and the flight software on the configuration data, the data management is a vital component of the processes for software certification, mission design, and flight operations. To enable the automated sequencing and data configuration of the GN&C subsystem on Orion, a desktop database configuration tool has been developed. The database tool allows the specification of the GN&C activity sequences, the automated transitions in the software, and the corresponding parameter reconfigurations. These aspects of the GN&C automation on Orion are all coordinated via data management, and the database tool provides the ability to test the automation capabilities during the development of the GN&C software. In addition to providing the infrastructure to manage the GN&C automation, the database tool has been designed with capabilities to import and export artifacts for simulation analysis and documentation purposes. Furthermore, the database configuration tool, currently used to manage simulation data, is envisioned to evolve into a mission planning tool for generating and testing GN&C software sequences and configurations. A key enabler of the GN&C automation design, the database tool allows both the creation and maintenance of the data artifacts, as well as serving the critical role of helping to manage, visualize, and understand the data-driven parameters both during software development

Automated contamination monitoring for hot particles

International Nuclear Information System (INIS)

Johnstone, G.; Case, L.

1987-01-01

INS Corp., the largest nuclear laundry company in the United States, has recently developed two types of automated contamination monitoring systems: 1) the Automated Laundry Monitor (ALM), which provides quality assurance monitoring for protective clothing contamination and 2) a low-level automated monitoring system for Plastic Volume Reduction Service (PVRS). The presentation details the inaccuracies associated with hand-probe frisking which led to the development of the ALM. The ALM was designed for 100% quality assurance monitoring of garments to the most stringent customer requirements. A review of why the ALM is essential in verifying the absence of hot particles on garments is given. The final topic addresses the expansion of the ALM technology in support of the INS Plastic Volume Reduction Service by monitoring decontaminated plastics to free release levels. This presentation reviews the design and operation of both monitoring systems

PREFACE: 5th International Conference on Mechatronics (ICOM'13)

Science.gov (United States)

Akramin Shafie, Amir; Raisuddin Khan, Md

2013-12-01

The Fifth International Conference on Mechatronics (ICOM2013), took place in Kuala Lumpur Malaysia from 2-4 July 2013. The biannual conference which started in 2001 is regularly organized by Faculty of Engineering, International Islamic University Malaysia (IIUM) with the aims to serve as a platform for exchange of ideas on advances of in mechatronics and their applications as well as to foster research and worldwide collaboration. The theme for the 2013 conference was 'Mechatronics: Sustainable Development through Innovative Solutions'. The ICOM 2013 Conference consisted of Keynote Speeches (5) and oral contributions (150). The topics of the conference were: Mechatronic systems and Applications Intelligent Systems Control and Instrumentation Signal and Image Processing Machine Vision Robotics and Automation Manufacturing Mechatronics Green Mechatronics Mechatronic Education Smart Materials and Structures Active Vibration Control Computer and Information Technology MEMS and NEMS Biomechatronics and Rehabilitation Engineering Autonomous Systems Energy and Sustainability Transportation System It is our great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) to the scientific community to promote further research in these areas. We believe that this volume will be both an excellent source of scientific material in the fast evolving fields that were covered by ICOM 2013. We thank the authors for their enthusiastic and high-grade contributions. We would also like to express our gratitude to the Organizing Committee, the Institutions and Sponsors and everyone who contributed to this conference through their supports and invaluable efforts. Editors Amir A Shafie aashafie@iium.edu.my Raisuddin Khan raisuddin@iium.edu.my Mahbubur Rashid mahbub@iium.edu.my Department of Mechatronics, International Islamic University Malaysia (IIUM), Kuala Lumpur Malaysia Organizing Committee Md Raisuddin Khan Md Mozasser Rahman Shahrul Naim

The 9. European nuclear conference

International Nuclear Information System (INIS)

Maurel, V.; Lewis, D.; Smirnov, V.P.; Gutierrez, J.E.; Paulin, Ph.; Markov, D.V.; Smirnov, A.V.; Polenok, V.S.; Horhoianu, G.; Olteanu, G.; Van der Schaaf, B.; Gavillet, D.; Lapena, J.; Ohms, C.; Roth, A.; Van Dyck, St.; Mardon, J.P.; Thomas, A.; Cipiere, M.F.; Faidy, C.; Hedin, F.; Delnondedieu, M.; Chassignole, B.; Doudet, L.; Dupond, O.; Kang, K.; Park, K.; Kim, K.; Ha, J.; Hoon-Seok, Jung; Yong-koo, Lee; Kwang-Ho, Kim; Seungwoo, Paek; Heui-Joo, Choi; Do-Hee, Ahn; Kwang-Rag, Kim; Minsoo, Lee; Sung-Paal, Yim; Hongsuk, Chung; Detroux, P.; Meessen, O.; Defloor, J.; Lars-Erik, Holm; Barescut, J.C.; Vacquier, B.; Laurier, D.; Caer, S.; Quesne, B.; Oudalova, A.; Geras'kin, St.; Dikarev, V.; Dikareva, N.; Chernonog, E.; Yang-Geun, Chung; Gab-Bock, Lee; Sun-Young, Bang; Yong-Sun, Lee; Bolognese-Milsztajn, T.; Frank, D.; Lacoste, V.; Pihet, P.; Lacronique, J.F.; Chauliac, C.; Verwaerde, D.; Pavageau, O.; Zaetta, A.; Varaine, F.; Warin, D.; Hudelot, J.P.; Bioux, Ph.; Klann, R.; Petruzzi, A.; D'auria, F.; Yung Kwon, Jin; Chul Jin, Chol; Mihalache, M.; Radu, V.; Pavelescu, M.; Schneidesch, Ch.R.; Jinzhao, Zhang; Dalleur, J.P.; Nuttin, A.; Meplan, O.; Wilson, J.; Perdu, F.; Campioni, G.; Mounier, C.; Sigrist, J.F.; Laine, Ch.; Broc, D.; Robbe, M.F.; Cariou, Y.; Seok-Kyun, Yoon; Win, Naing; Myung-Hyun, Kim; Kyung, Hee; Fridman, E.; Shwageraus, E.; Galperin, A.; Meplan, O.; Laulan, O.; Mechel-Sendis, F.; Belgaid, M.; Kadem, F.; Amokrane, A.; Hamidouche, T.; El-Khider, Si-Ahmed

2005-01-01

This issue gathers the abstracts of the papers presented at the ninth European nuclear conference (ENC-2005). The main part of the conference is split into 20 sessions. These sessions cover all technical aspects of nuclear power, from reactor design to waste management, without forgetting experimental and research reactors, reactor dismantling, economy, resources, safety, radioprotection and education issues. Perspectives of a nuclear renaissance are clearly visible in the world. This renaissance, mainly due to political, economical, societal and ecological factors, is fuelled by scientific and technical progress. This conference was the opportunity to present together these aspects of nuclear power and to analyze their mutual interactions

Integrated circuit design using design automation

International Nuclear Information System (INIS)

Gwyn, C.W.

1976-09-01

Although the use of computer aids to develop integrated circuits is relatively new at Sandia, the program has been very successful. The results have verified the utility of the in-house CAD design capability. Custom IC's have been developed in much shorter times than available through semiconductor device manufacturers. In addition, security problems were minimized and a saving was realized in circuit cost. The custom CMOS IC's were designed at less than half the cost of designing with conventional techniques. In addition to the computer aided design, the prototype fabrication and testing capability provided by the semiconductor development laboratory and microelectronics computer network allows the circuits to be fabricated and evaluated before the designs are transferred to the commercial semiconductor manufacturers for production. The Sandia design and prototype fabrication facilities provide the capability of complete custom integrated circuit development entirely within the ERDA laboratories

QuantifyMe: An Open-Source Automated Single-Case Experimental Design Platform

Directory of Open Access Journals (Sweden)

Sara Taylor

2018-04-01

Full Text Available Smartphones and wearable sensors have enabled unprecedented data collection, with many products now providing feedback to users about recommended step counts or sleep durations. However, these recommendations do not provide personalized insights that have been shown to be best suited for a specific individual. A scientific way to find individualized recommendations and causal links is to conduct experiments using single-case experimental design; however, properly designed single-case experiments are not easy to conduct on oneself. We designed, developed, and evaluated a novel platform, QuantifyMe, for novice self-experimenters to conduct proper-methodology single-case self-experiments in an automated and scientific manner using their smartphones. We provide software for the platform that we used (available for free on GitHub, which provides the methodological elements to run many kinds of customized studies. In this work, we evaluate its use with four different kinds of personalized investigations, examining how variables such as sleep duration and regularity, activity, and leisure time affect personal happiness, stress, productivity, and sleep efficiency. We conducted a six-week pilot study (N = 13 to evaluate QuantifyMe. We describe the lessons learned developing the platform and recommendations for its improvement, as well as its potential for enabling personalized insights to be scientifically evaluated in many individuals, reducing the high administrative cost for advancing human health and wellbeing.

QuantifyMe: An Open-Source Automated Single-Case Experimental Design Platform.

Science.gov (United States)

Taylor, Sara; Sano, Akane; Ferguson, Craig; Mohan, Akshay; Picard, Rosalind W

2018-04-05

Smartphones and wearable sensors have enabled unprecedented data collection, with many products now providing feedback to users about recommended step counts or sleep durations. However, these recommendations do not provide personalized insights that have been shown to be best suited for a specific individual. A scientific way to find individualized recommendations and causal links is to conduct experiments using single-case experimental design; however, properly designed single-case experiments are not easy to conduct on oneself. We designed, developed, and evaluated a novel platform, QuantifyMe, for novice self-experimenters to conduct proper-methodology single-case self-experiments in an automated and scientific manner using their smartphones. We provide software for the platform that we used (available for free on GitHub), which provides the methodological elements to run many kinds of customized studies. In this work, we evaluate its use with four different kinds of personalized investigations, examining how variables such as sleep duration and regularity, activity, and leisure time affect personal happiness, stress, productivity, and sleep efficiency. We conducted a six-week pilot study ( N = 13) to evaluate QuantifyMe. We describe the lessons learned developing the platform and recommendations for its improvement, as well as its potential for enabling personalized insights to be scientifically evaluated in many individuals, reducing the high administrative cost for advancing human health and wellbeing.

Towards a characterization of information automation systems on the flight deck

Science.gov (United States)

Dudley, Rachel Feddersen

This thesis summarizes research to investigate the characteristics that define information automation systems used on aircraft flight decks and the significant impacts that these characteristics have on pilot performance. Major accomplishments of the work include the development of a set of characteristics that describe information automation systems on the flight deck and an experiment designed to study a subset of these characteristics. Information automation systems on the flight deck are responsible for the collection, processing, analysis, and presentation of data to the flightcrew. These systems pose human factors issues and challenges that must be considered by designers of these systems. Based on a previously developed formal definition of information automation for aircraft flight deck systems, an analysis process was developed and conducted to reach a refined set of information automation characteristics. In this work, characteristics are defined as a set of properties or attributes that describe an information automation system's operation or behavior, which can be used to identify and assess potential human factors issues. Hypotheses were formed for a subset of the characteristics: Automation Visibility, Information Quality, and Display Complexity. An experimental investigation was developed to measure performance impacts related to these characteristics, which showed mixed results of expected and surprising findings, with many interactions. A set of recommendations were then developed based on the experimental observations. Ensuring that the right information is presented to pilots at the right time and in the appropriate manner is the job of flight deck system designers. This work provides a foundation for developing recommendations and guidelines specific to information automation on the flight deck with the goal of improving the design and evaluation of information automation systems before they are implemented.

Virtual Machine in Automation Projects

OpenAIRE

Xing, Xiaoyuan

2010-01-01

Virtual machine, as an engineering tool, has recently been introduced into automation projects in Tetra Pak Processing System AB. The goal of this paper is to examine how to better utilize virtual machine for the automation projects. This paper designs different project scenarios using virtual machine. It analyzes installability, performance and stability of virtual machine from the test results. Technical solutions concerning virtual machine are discussed such as the conversion with physical...

An Automation System for Optimizing a Supply Chain Network Design under the Influence of Demand Uncertainty

OpenAIRE

Polany, Rany

2012-01-01

This research develops and applies an integrated hierarchical framework for modeling a multi-echelon supply chain network design, under the influence of demand uncertainty. The framework is a layered integration of two levels: macro, high-level scenario planning combined with micro, low-level Monte Carlo simulation of uncertainties in demand. To facilitate rapid simulation of the effects of demand uncertainty, the integrated framework was implemented as a dashboard automation system using Mic...

Agent-Oriented Embedded Control System Design and Development of a Vision-Based Automated Guided Vehicle

Directory of Open Access Journals (Sweden)

Wu Xing

2012-07-01

Full Text Available This paper presents a control system design and development approach for a vision-based automated guided vehicle (AGV based on the multi-agent system (MAS methodology and embedded system resources. A three-phase agent-oriented design methodology Prometheus is used to analyse system functions, construct operation scenarios, define agent types and design the MAS coordination mechanism. The control system is then developed in an embedded implementation containing a digital signal processor (DSP and an advanced RISC machine (ARM by using the multitasking processing capacity of multiple microprocessors and system services of a real-time operating system (RTOS. As a paradigm, an onboard embedded controller is designed and developed for the AGV with a camera detecting guiding landmarks, and the entire procedure has a high efficiency and a clear hierarchy. A vision guidance experiment for our AGV is carried out in a space-limited laboratory environment to verify the perception capacity and the onboard intelligence of the agent-oriented embedded control system.

Nuclear the next generation. 34th Annual Canadian Nuclear Society conference and 37th CNS/CNA student conference

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-07-01

The 34th Annual Canadian Nuclear Society Conference and 37th CNS/CNA Student Conference was held in Toronto, Ontario, Canada on June 10-13, 2013. With the theme of the conference, 'Nuclear the Next Generation{sup ,} the conference actively engaged 400 participants in the many facets of this well-rum event. The conference combined excellent plenary speakers, a full set of technical papers, challenging student poster competitions, and interesting exhibits. The plenary session focussed on the themes: 'Nuclear Power - a Business Driver for the Next Generation'; and, 'Designing - the Next Generation'. The technical session titles were: Reactor and Radiation Physics; Environment and Spent Fuel Management; Operations and Maintenance; Fusion Science and Technology; Advanced Reactors and Fuels; Plant Life Extension, Refurbishment and Aging; Safety and Licensing; Chemistry and Materials; and, Thermalhydraulics. The student conference session was well attended and completed the 4 day event.

International Conference on Vehicle and Automotive Engineering

CERN Document Server

Bolló, Betti

2017-01-01

This book presents the proceedings of the first vehicle engineering and vehicle industry conference. It captures the outcome of theoretical and practical studies as well as the future development trends in a wide field of automotive research. The themes of the conference include design, manufacturing, economic and educational topics.

2nd International Conference on Mechatronics and Robotics Engineering

CERN Document Server

Wei, Bin

2017-01-01

Featuring selected contributions from the 2nd International Conference on Mechatronics and Robotics Engineering, held in Nice, France, February 18–19, 2016, this book introduces recent advances and state-of-the-art technologies in the field of advanced intelligent manufacturing. This systematic and carefully detailed collection provides a valuable reference source for mechanical engineering researchers who want to learn about the latest developments in advanced manufacturing and automation, readers from industry seeking potential solutions for their own applications, and those involved in the robotics and mechatronics industry.

International MultiConference of Engineers and Computer Scientists 2013

CERN Document Server

Ao, Sio-Iong; Huang, Xu; Castillo, Oscar

2014-01-01

This volume contains revised and extended research articles written by prominent researchers participating in the international conference on Advances in Engineering Technologies and Physical Science was held in Hong Kong, 13-15 March, 2013. Topics covered include engineering physics, engineering mathematics, scientific computing, control theory, automation, artificial intelligence, electrical engineering, and industrial applications. The book offers the state of art of tremendous advances in engineering technologies and physical science and applications, and also serves as an excellent reference work for researchers and graduate students working with/on engineering technologies and physical science and applications.

Optimizing the balance between task automation and human manual control in simulated submarine track management.

Science.gov (United States)

Chen, Stephanie I; Visser, Troy A W; Huf, Samuel; Loft, Shayne

2017-09-01

Automation can improve operator performance and reduce workload, but can also degrade operator situation awareness (SA) and the ability to regain manual control. In 3 experiments, we examined the extent to which automation could be designed to benefit performance while ensuring that individuals maintained SA and could regain manual control. Participants completed a simulated submarine track management task under varying task load. The automation was designed to facilitate information acquisition and analysis, but did not make task decisions. Relative to a condition with no automation, the continuous use of automation improved performance and reduced subjective workload, but degraded SA. Automation that was engaged and disengaged by participants as required (adaptable automation) moderately improved performance and reduced workload relative to no automation, but degraded SA. Automation engaged and disengaged based on task load (adaptive automation) provided no benefit to performance or workload, and degraded SA relative to no automation. Automation never led to significant return-to-manual deficits. However, all types of automation led to degraded performance on a nonautomated task that shared information processing requirements with automated tasks. Given these outcomes, further research is urgently required to establish how to design automation to maximize performance while keeping operators cognitively engaged. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Selecting automation for the clinical chemistry laboratory.

Science.gov (United States)

Melanson, Stacy E F; Lindeman, Neal I; Jarolim, Petr

2007-07-01

Laboratory automation proposes to improve the quality and efficiency of laboratory operations, and may provide a solution to the quality demands and staff shortages faced by today's clinical laboratories. Several vendors offer automation systems in the United States, with both subtle and obvious differences. Arriving at a decision to automate, and the ensuing evaluation of available products, can be time-consuming and challenging. Although considerable discussion concerning the decision to automate has been published, relatively little attention has been paid to the process of evaluating and selecting automation systems. To outline a process for evaluating and selecting automation systems as a reference for laboratories contemplating laboratory automation. Our Clinical Chemistry Laboratory staff recently evaluated all major laboratory automation systems in the United States, with their respective chemistry and immunochemistry analyzers. Our experience is described and organized according to the selection process, the important considerations in clinical chemistry automation, decisions and implementation, and we give conclusions pertaining to this experience. Including the formation of a committee, workflow analysis, submitting a request for proposal, site visits, and making a final decision, the process of selecting chemistry automation took approximately 14 months. We outline important considerations in automation design, preanalytical processing, analyzer selection, postanalytical storage, and data management. Selecting clinical chemistry laboratory automation is a complex, time-consuming process. Laboratories considering laboratory automation may benefit from the concise overview and narrative and tabular suggestions provided.

Automation of Taxiing

Directory of Open Access Journals (Sweden)

Jaroslav Bursík

2017-01-01

Full Text Available The article focuses on the possibility of automation of taxiing, which is the part of a flight, which, under adverse weather conditions, greatly reduces the operational usability of an airport, and is the only part of a flight that has not been affected by automation, yet. Taxiing is currently handled manually by the pilot, who controls the airplane based on information from visual perception. The article primarily deals with possible ways of obtaining navigational information, and its automatic transfer to the controls. Analyzed wand assessed were currently available technologies such as computer vision, Light Detection and Ranging and Global Navigation Satellite System, which are useful for navigation and their general implementation into an airplane was designed. Obstacles to the implementation were identified, too. The result is a proposed combination of systems along with their installation into airplane’s systems so that it is possible to use the automated taxiing.

1993 Department of Energy Records Management Conference

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

This document consists of viewgraphs from the presentations at the conference. Topics included are: DOE records management overview, NIRMA and ARMA resources, NARA records management training, potential quality assurance records, filing systems, organizing and indexing technical records, DOE-HQ initiatives, IRM reviews, status of epidemiologic inventory, disposition of records and personal papers, inactive records storage, establishing administrative records, managing records at Hanford, electronic mail -- legal and records issues, NARA-GAO reports status, consultive selling, automated indexing, decentralized approach to scheduling at a DOE office, developing specific records management programs, storage and retrieval at Savannah River Plant, an optical disk case study, and special interest group reports.

Joint conference of iMEC 2015 (2nd International Manufacturing Engineering Conference & APCOMS 2015 (3rd Asia-Pacific Conference on Manufacturing Systems)

Science.gov (United States)

2016-02-01

The iMEC 2015 is the second International Manufacturing Engineering Conference organized by the Faculty of Manufacturing, Universiti Malaysia Pahang (UMP), held from 12-14th November 2015 in Kuala Lumpur, Malaysia, with a theme "Materials, Manufacturing and Systems for Tomorrow". For the first time, iMEC is organized together with 3rd Asia- Pacific Conference on Manufacturing System (APCOMS 2015) which owned by Fakulti Teknologi Industri, Institut Teknologi Bandung (ITB), Indonesia. This is an extended collaboration between UMP and ITB to intensify knowledge sharing and experiences between higher learning institutions. This conference (iMEC & APCOMS 2015) is a platform for knowledge exchange and the growth of ideas, particularly in manufacturing engineering. The conference aims to bring researchers, academics, scientists, students, engineers and practitioners from around the world together to present their latest findings, ideas, developments and applications related to manufacturing engineering and other related research areas. With rapid advancements in manufacturing engineering, iMEC is an appropriate medium for the associated community to keep pace with the changes. In 2015, the conference theme is “Materials, Manufacturing and Systems for Tomorrow” which reflects the acceleration of knowledge and technology in global manufacturing. The papers in these proceedings are examples of the work presented at the conference. They represent the tip of the iceberg, as the conference attracted over 200 abstracts from Malaysia, Indonesia, Japan, United Kingdom, Australia, India, Bangladesh, South Africa, Turkey and Morocco and 151 full papers were accepted in these proceedings. The conference was run in four parallel sessions with 160 presenters sharing their latest finding in the areas of manufacturing process, systems, advanced materials and automation. The first keynote presentation was given by Prof. B. S. Murthy (IIT, Madras) on "Nanomaterials with Exceptional

Maneuver Automation Software

Science.gov (United States)

Uffelman, Hal; Goodson, Troy; Pellegrin, Michael; Stavert, Lynn; Burk, Thomas; Beach, David; Signorelli, Joel; Jones, Jeremy; Hahn, Yungsun; Attiyah, Ahlam;

Automated expert modeling for automated student evaluation.

Energy Technology Data Exchange (ETDEWEB)

Abbott, Robert G.

2006-01-01

The 8th International Conference on Intelligent Tutoring Systems provides a leading international forum for the dissemination of original results in the design, implementation, and evaluation of intelligent tutoring systems and related areas. The conference draws researchers from a broad spectrum of disciplines ranging from artificial intelligence and cognitive science to pedagogy and educational psychology. The conference explores intelligent tutoring systems increasing real world impact on an increasingly global scale. Improved authoring tools and learning object standards enable fielding systems and curricula in real world settings on an unprecedented scale. Researchers deploy ITS's in ever larger studies and increasingly use data from real students, tasks, and settings to guide new research. With high volumes of student interaction data, data mining, and machine learning, tutoring systems can learn from experience and improve their teaching performance. The increasing number of realistic evaluation studies also broaden researchers knowledge about the educational contexts for which ITS's are best suited. At the same time, researchers explore how to expand and improve ITS/student communications, for example, how to achieve more flexible and responsive discourse with students, help students integrate Web resources into learning, use mobile technologies and games to enhance student motivation and learning, and address multicultural perspectives.

Space station automation study: Automation requriements derived from space manufacturing concepts,volume 2