WorldWideScience

Sample records for des systemes carbonates

  1. Dental Encounter System (DES)

    Data.gov (United States)

    Department of Veterans Affairs — Dental Encounter System (DES) is an automated health care application designed to capture critical data about the operations of VA Dental Services. Information on...

  2. Etude theorique et experimentale des evaporateurs de dioxyde de carbone operant dans des conditions de givrage

    Science.gov (United States)

    Bendaoud, Adlane Larbi

    . Dans la partie theorique, un modele traitant les aspects thermique, hydrodynamique et massique a ete elabore. Sur la base de ce modele a ete ecrit un programme informatique en langage FORTRAN 6.6. Il est base sur la discretisation du serpentin en volumes de controle, est entierement automatise et peut traiter des echangeurs de chaleur avec des circuits de refrigerant complexes pouvant avoir des entrees et sorties multiples ainsi que des bifurcations. La presence simultanee des trois phases thermodynamiques du refrigerant (liquide sous refroidi, fluide sature, vapeur surchauffee) dans le serpentin est aussi prise en charge. Le modele a ete valide pour un fonctionnement avec et sans formation de givre en utilisant des donnees experimentales disponibles dans la litterature et celles obtenues sur le banc d'essai de CanmetENERGIE. Celui-ci a ete mis a jour pour les besoins de la presente recherche et pour cela, un systeme de surchauffe et d'injection de la vapeur d'eau dans une enceinte a tres basse temperature a ete dimensionne, fabrique et installe. Un dispositif de visualisation de la formation de givre, ainsi qu'un equipement de mesure de la temperature, de la pression et de l'humidite relative de l'air ont aussi ete ajoutes. Une fois le modele valide, des simulations numeriques sur le serpentin avec et sans formation de givre ont ete effectuees. Un premier cas de base a servi comme reference pour d'autres cas pour lesquels une etude parametrique sur la geometrie et le fonctionnement a ete menee. Il a ete montre par rapport au cas de base que : 1. la diminution de la densite des ailettes sur des rangees specifiques du serpentin donne une surface minimale (Amin) plus grande, retardant ainsi l'obstruction totale du serpentin par le givre et permet donc un temps de fonctionnement plus grand et une frequence de degivrage plus faible. 2. une bonne configuration de circuit de refrigerant augmente le temps de fonctionnement du serpentin de 200 % et delivre une puissance

  3. The commercialization of decentralized energy systems (DES) in the Philippines

    International Nuclear Information System (INIS)

    Bernardo, J.Y.; Navarro, L.B.; Abito, G.; Lim, B.P.

    1992-01-01

    PNOC-ERDC is implementing the project ''Commercialization of Decentralized Energy Systems or DES'' with assistance from the European Community. The project hopes to promote the utilization of DES technologies by providing financial and technical assistance to enterpreneurs engaged in the manufacture and/or distribution of DES technologies. At present, the DES project has provided loans totalling P17.9 million to 6 entrepreneurs. Technologies supported include photovoltaics, biogas and agricultural waste-fired dryers. (auth.). 2 tabs

  4. Optimisation structurelle des systemes energetiques

    Science.gov (United States)

    Saloux, Etienne

    The development of renewable energies is growing over the last decade to face environmental issues due to the world fossil fuel consumption increase. These energies are highly involved in houses and commercial buildings and numerous systems have been proposed to meet their energy demand. Therefore, improving both efficiency and use of systems, i.e. improving energy management, appears essential to limit the ecological footprint of humanity on the planet. However, system integration yields a very complex problem to be solved due to the large number of units and theirs technology, size, working conditions and interconnections. This situation highlights the lack of systematic analysis for comparing integrated system performance and for correctly pointing out their potential. As a result, the objective of this thesis is to develop and to present such a method, in other words the structural optimization of energy systems. It will be helpful to choose the optimal equipment by identifying all the possibilities of system arrangements and for comparing their performance. Combinations have then been subjected to environmental (climate), structural (available area) and economical constrains while assessment criteria have considered both energy, economic and ecological aspects. For that reason, as well as energy and economic analyses, the exergy concept has also been applied to the equipment. Nevertheless, the high degree of complexity of integrated systems and the tedious numerical calculations make the resolution by using standard software very difficult. It is clear that the whole optimization project would be considerable and the aim is to develop models and optimization tools. First of all, an exhaustive review of energy equipment including photovoltaic panels, solar collectors, heat pumps and thermal energy storage systems, has been performed. Afterwards, energy and exergy models have been developed and tested for two specific energy scenarios: a) a solar assisted heat

  5. Investigations of the ternary system beryllium-carbon-tungsten and analyses of beryllium on carbon surfaces; Untersuchung des ternaeren Systems Beryllium-Kohlenstoff-Wolfram und Betrachtungen von Beryllium auf Kohlenstoffoberflaechen

    Energy Technology Data Exchange (ETDEWEB)

    Kost, Florian

    2009-05-25

    Beryllium, carbon and tungsten are planned to be used as first wall materials in the future fusion reactor ITER. The aim of this work is a characterization of mixed material formation induced by thermal load. To this end, model systems (layers) were prepared and investigated, which give insight into the basic physical and chemical concepts. Before investigating ternary systems, the first step was to analyze the binary systems Be/C and Be/W (bottom-up approach), where the differences between the substrates PG (pyrolytic graphite) and HOPG (highly oriented pyrolytic graphite) were of special interest. Particularly X-ray photoelectron spectroscopy (XPS), low energy ion scattering (ISS) and Rutherford backscattering spectroscopy (RBS) were used as analysis methods. Beryllium evaporated on carbon shows an island growth mode, whereas a closed layer can be assumed for layer thicknesses above 0.7 nm. Annealing of the Be/C system induces Be{sub 2}C island formation for T{>=}770 K. At high temperatures (T{>=}1170 K), beryllium carbide dissociates, resulting in (metallic) beryllium desorption. For HOPG, carbide formation starts at higher temperatures compared to PG. Activation energies for the diffusion processes were determined by analyzing the decreasing beryllium amount versus annealing time. Surface morphologies were characterized using angle-resolved XPS (ARXPS) and atomic force microscopy (AFM). Experiments were performed to study processes in the Be/W system in the temperature range from 570 to 1270 K. Be{sub 2}W formation starts at 670 K, a complete loss of Be{sub 2}W is observed at 1170 K due to dissociation (and subsequent beryllium desorption). Regarding ternary systems, particularly Be/C/W and C/Be/W were investigated, attaching importance to layer thickness (reservoir) variations. At room temperature, Be{sub 2}C, W{sub 2}C, WC and Be{sub 2}W formation at the respective interfaces was observed. Further Be{sub 2}C is forming with increasing annealing temperatures

  6. DES/CCHP: The best utilization mode of natural gas for China’s low carbon economy

    International Nuclear Information System (INIS)

    Li, Yajun; Xia, Yan

    2013-01-01

    In this paper, through the analysis of the great challenges faced by China’s energy industry in the development of low carbon economy, it is advisable that China increase the proportion of natural gas (NG) in primary energy as the main strategy of energy conservation and CO 2 reduction in the advancement of industrialization and urbanization. In the near future, NG will become one of the major energy suppliers for new towns and industrial parks, and work for electric peak shaving when used in distributed energy system/combined cold, heat and power (DES/CCHP). However, as an efficient approach to improve the energy utilization efficiency, DES/CCHP cannot only increase the current energy efficiency from 33% to 50.3% (the world’s average), but also reduce the cost of terminal supplies of power, cold, steam and hot water. It will become one of the most important means to control CO 2 emissions in the next 20 years, and is essential to China’s low carbon industrialization and urbanization. - Highlights: ► China’s high economic growth has lead to a huge amount of carbon emissions. ► Climate change calls for a low carbon economy in China. ► The pressure of carbon emission reduction requires China reduce the excessive dependency on coal and oil. ► Natural gas used in distributed energy system/combined cold, heat and power (NG DES/CCHP) is low in carbon emission. ► NG DES/CCHP is the optimal energy supplier for a low carbon economy in China.

  7. Electrochemical studies of iron/carbonates system applied to the formation of thin layers of siderite on inert substrates; Etudes electrochimiques du systeme fer/carbonates appliquees a la formation de couches minces de siderite sur des substrats inertes

    Energy Technology Data Exchange (ETDEWEB)

    Ithurbide, A. [CEA Saclay, Dept. de Physico-Chimie (DEN/DPC/SECR/L3MR), 91 - Gif sur Yvette (France); Peulon, S. [Univ. d' Evry-val-d' Essonne, UMR 8587, CNRS, 91 - Evry (France); Mandin, Ph. [Ecole Nationale Superieure de Chimie de Paris (ENSCP), UMR 7575, 75 - Paris (France); Beaucaire, C. [CEA Saclay, Dept. de Physico-Chimie (DEN/DPC/SECR/L3MR), 91 - Gif sur Yvette (France); Chausse, A. [Univ. d' Evry-val-d' Essonne, UMR 8587, CNRS, 91 - Evry (France)

    2007-07-01

    In order to understand the complex mechanisms of the reactions occurring, a methodology is developed. It is based on the use of compounds electrodeposited under the form of thin layers and which are used then as electrodes to study their interactions with the toxic species. It is in this framework that is studied the electrodeposition of siderite on inert substrates. At first, have been studied iron electrochemical systems in carbonated solutions. These studies have been carried out with classical electrochemical methods (cyclic voltametry, amperometry) coupled to in-situ measurements: quartz microbalance, pH. Different compounds have been obtained under the form of homogeneous and adherent thin layers. The analyses of these depositions, by different ex-situ characterizations (XRD, IR, SEM, EDS..) have revealed particularly the presence of siderite. Then, the influence of several experimental parameters (substrate, potential, medium composition, temperature) on the characteristics of siderite thin layers has been studied. From these experimental results, models have been proposed. (O.M.)

  8. On the interactions between carbon monoxide and transition metals; Contribution a l'etude des interractions de l'oxyde de carbone et des metaux de transition

    Energy Technology Data Exchange (ETDEWEB)

    Degras, D E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-12-01

    The sticking of carbon monoxide on surface atoms of transition metals is a collective phenomenon: according to the adsorption process period which is considered, this phenomenon may be formally described either by the Elovich equation or essentially from a steric point of view. The process rate depends upon the nature of the metal, the carbon monoxide pressure the temperature and the population densities of the induced and fundamental energy levels of the gas-solid bond. At least one of these induced levels tends to disappear with increasing time. For a localised adsorption and taking into account the surface Rayleigh waves, the analysis of the surface entropy yields the so-called iso-kinetic temperature for thermal desorption. This temperature is correlated with the cohesive energy of the metal surface atoms. Finally, it is shown that the interactions of a low energy electron bean with adsorbed molecules - reflection and energy exchange, desorption, ionization or dissociative ionization are strongly dependent on the energy levels of the gas-solid bond and the relative populations of these levels. (author) [French] La capture des molecules d'oxyde de carbone par les atomes de surface des metaux de transition est un phenomene collectif: il peut etre decrit formellernent soit par l'equation d'Elovich, soit a partir de considerations purement steriques suivant la periode envisagee dans l'evolution du processus d'adsorption. Cette evolution est determinee par la nature du metal, la pression d'oxyde de carbone, la temperature et la densite des populations des niveaux fondamental et induits de la liaison. L'un au moins de ceux-ci tend a disparaitre avec le temps. L' etude de l'entropie du complexe de surface a partir des ondes de Rayleigh en adsorption localisee permet de retrouver theoriquernent la temperature dite isocinetique dans la dissociation thermique de ce complexe. Cette temperature depend de la cohesion des atomes rnetalliques de surface. Enfin l'interaction d

  9. 357 Datation des carbonates impurs au Maroc à l'aide de la ...

    African Journals Online (AJOL)

    youness

    Datation des carbonates impurs au Maroc à l'aide de la méthode de déséquilibre radioactif 230Th/234U. A. Choukri1, S. Semghouli1, O. Hakam1, M. Moheidine3 et M. Laatiris4. 1Laboratoire de Physique de la Matière et Rayonnement, Equipe de. Physique et Techniques Nucléaires, Faculté des Sciences, P.B 133,. 14000 ...

  10. Atmospheric corrosion of uranium-carbon alloys; Corrosion atmospherique des alliages uranium-carbone

    Energy Technology Data Exchange (ETDEWEB)

    Rousset, P; Accary, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The authors study the corrosion of uranium-carbon alloys having compositions close to that of the mono-carbide; they show that the extent of the observed corrosion effects increases with the water vapour content of the surrounding gas and they conclude that the atmospheric corrosion of these alloys is due essentially to the humidity of the air, the effect of the oxygen being very slight at room temperature. They show that the optimum conditions for preserving U-C alloys are either a vacuum or a perfectly dry argon atmosphere. The authors have also established that the type of corrosion involved is a corrosion which 'cracks under stress' and is transgranular (it can also be intergranular in the case of sub-stoichiometric alloys). They propose, finally, two hypotheses for explaining this mechanism, one of which is illustrated by the existence, at the fissure interface, of corrosion products which can play the role of 'corners' in the mono-carbide grains. (authors) [French] Les auteurs etudient la corrosion des alliages uranium-carbone de composition voisine du monocarbure; ils montrent que l'importance des effets de la corrosion observee augmente avec la teneur en vapeur d'eau du milieu gazeux ambiant et concluent que la corrosion atmospherique de ces alliages est due essentiellement a l'humidite de l'air, l'action de l'oxygene de l'air etant tres faible a la temperature ambiante. Ils indiquent que les conditions optimales de conservation des alliages U-C sont le vide ou une atmosphere d'argon parfaitement desseches. D'autre part, les auteurs etablissent que le type de corrosion mis en jeu est une corrosion 'fissurante sous contrainte', transgranulaire (pouvant egalement etre intergranulaire dans le cas d'alliages sous-stoechiometriques). Ils proposent enfin deux hypotheses pour rendre compte de ce mecanisme, dont l'une est illustree par la mise en evidence, a l'interface des fissures, de produits de corrosion pouvant jouer le role de 'coins' dans les grains de

  11. 98 Etude Comparative du Systeme Phonematique et Tonal des ...

    African Journals Online (AJOL)

    98. Etude Comparative du Systeme Phonematique et Tonal des. Deux Parlers: Le Yoruba du Nigeria et L'itsa Parle en. Republique du Benin. Ajani Akinwumi Lateef et Ayuba G. Ajibabi http://dx.doi./org/10.4314/ujah.v18i3.5. Résume. En ce début de l'époque ou la mondialisation et la coexistence des peuples dans le ...

  12. Dynamique de la teneur en carbone et en azote des sols dans les ...

    African Journals Online (AJOL)

    SARAH

    30 nov. 2014 ... INTRODUCTION. L'étude de la dynamique de carbone et de l'azote dans le ... climatique et l'autre de dimension locale, la fertilité des sols. ... situe à la limite méridionale du domaine sahélien, le ..... Soils and global change.

  13. Percolation dans des reseaux realistes de nanostructures de carbone

    Science.gov (United States)

    Simoneau, Louis-Philippe

    Carbon nanotubes have very interesting mechanical and electrical properties for various applications in electronics. They are highly resistant to deformation and can be excellent conductors or semiconductors. However, manipulating individual nanotubes to build structured devices remains very difficult. There is no method for controlling all of the electrical properties, the orientation and the spatial positioning of a large number of nanotubes. The fabrication of disordered networks of nanotubes is much easier, and these systems have a good electrical conductivity which makes them very interesting, especially as materials of transparent and flexible electrodes. There are three main methods of production used to make networks of nanotubes: the solution deposition, the direct growth on substrate and the embedding in a polymer matrix. The solution deposition method can form networks of various densities on a variety of substrates, the direct growth of nanotubes allows the creation of very clean networks on substrates such as SiO2, and the embedding in a polymer matrix can give composite volumes containing varying amounts of nanotubes. Many parameters such as the length of the tubes, their orientation or their tortuosity influence the properties of these networks and the presence of structural disorder complicates the understanding of their interactions. Predicting the properties of a network, such as conductivity, from a few characteristics such as size and density of the tubes can be difficult. This task becomes even more complex if one wants to identify the parameters that will optimize the performance of a device containing the material. We chose to address the carbon nanotube networks problem by developing a series of computer simulation tools that are mainly based on the Monte Carlo method. We take into account a large number of parameters to describe the characteristics of the networks, which allows for a more reliable representation of real networks as well as

  14. Kinetics of heterogeneous systems; La cinetique des milieux heterogenes

    Energy Technology Data Exchange (ETDEWEB)

    Deniz, V [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    In this report, a general transport theory treatment is presented for the kinetics study as applied to finite heterogeneous systems. The theory is applicable to experiments near the critical point as well as to pulsed neutron experiments on multiplying or non-multiplying lattices. The general method is also applied to exponential experiments on infinite non-diverging lattices. The particularity of the present study is the explicit introduction of heterogeneity in the formulation and the search for the dependence of the parameters on the buckling of the finite medium. As a result of this, the finite medium parameters are in the first place expressed in terms of the corresponding infinite medium ones through the buckling and the anisotropic migration areas, and in the second place all the parameters are expressed as integrals only over an unit cell instead of over the whole pile. A preliminary less detailed study is first made in order to distinguish clearly between what are called 'dynamic parameters' and 'static parameters', and to define the meanings given in this report to these two terms. In the appendices are given approximate one-group treatments for the study of the dynamic fine structure, the time constant in infinite lattices, and the anisotropic diffusion coefficients in non-multiplying lattices. (author) [French] On presente dans ce rapport une methode generale, utilisant la theorie du transport pour l'etude de la cinetique des milieux finis heterogenes. La theorie est applicable aussi bien aux experiences pres de la criticite qu'aux experiences par sources pulsees de neutrons sur des reseaux multiplicateurs ou non-multiplicateurs. La methode generale est aussi appliquee aux experiences exponentielles sur des reseaux infinis non-divergents. La particularite de l'etude est l'introduction explicite de l'heterogeneite dans la formulation et la recherche de la dependance des parametres par rapport au laplacien du reseau fini. Il en resulte d'une part que les

  15. On the stability of non-linear systems; Sur la stabilite des systemes non-lineaires

    Energy Technology Data Exchange (ETDEWEB)

    Guelman, M [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires, services scientifiques

    1968-09-01

    A study is made of the absolute stability of nonlinear systems, using Liapounov's second method and taking into account the results obtained from V.M. Popov's work. The results already established are first presented, in particular concerning the frequency domain criterions for absolute stability of automatic control systems containing one single non linearity. The results have been extended to show the existence of a limiting parabola. New use is then made of the methods studied for deriving absolute stability criterions for a system containing a different type of non linearity. Finally, the results obtained are considered from the point of view of Aizerman's conjecture. (author) [French] Dans ce travail, on etudie la stabilite absolue des systemes non lineaires utilisant la deuxieme methode de Liapounov en tenant compte des resultats acquis a partir des travaux de V.M. Popov. On fait d'abord un expose des resultats deja etablis, en particulier en ce qui concerne les criteres frequentiels de stabilite absolue pour le cas d'un systeme de commande automatique comportant une seule non linearite. On a prolonge ces resultats jusqu'a l'etablissement de l'existence d'une parabole limite. On fait ensuite une nouvelle utilisation des methodes etudiees, etablissant des criteres de stabilite absolue pour un systeme comportant un type different de non linearite. On etudie enfin les resultats obtenus, dans l'optique de la conjecture de Aizerman. (auteur)

  16. Optimisation multi-objectif des systemes energetiques

    Science.gov (United States)

    Dipama, Jean

    optimization method which is very robust and widely used to solve problems usually difficult to handle by traditional methods. Genetic algorithms (GAs) have been used in previous research and proved to be efficient in optimizing heat exchangers networks (HEN) (Dipama et al., 2008). So, HEN have been synthesized to recover the maximum heat in an industrial process. The optimization problem formulated in the context of this work consists of a single objective, namely the maximization of energy recovery. The optimization algorithm developed in this thesis extends the ability of GAs by taking into account several objectives simultaneously. This algorithm provides an innovation in the method of finding optimal solutions, by using a technique which consist of partitioning the solutions space in the form of parallel grids called "watching corridors". These corridors permit to specify areas (the observation corridors) in which the most promising feasible solutions are found and used to guide the search towards optimal solutions. A measure of the progress of the search is incorporated into the optimization algorithm to make it self-adaptive through the use of appropriate genetic operators at each stage of optimization process. The proposed method allows a fast convergence and ensure a diversity of solutions. Moreover, this method gives the algorithm the ability to overcome difficulties associated with optimizing problems with complex Pareto front landscapes (e.g., discontinuity, disjunction, etc.). The multi-objective optimization algorithm has been first validated using numerical test problems found in the literature as well as energy systems optimization problems. Finally, the proposed optimization algorithm has been applied for the optimization of the secondary loop of Gentilly-2 nuclear power plant, and a set of solutions have been found which permit to make the power plant operate in optimal conditions. (Abstract shortened by UMI.)

  17. The NASA Carbon Monitoring System

    Science.gov (United States)

    Hurtt, G. C.

    2015-12-01

    Greenhouse gas emission inventories, forest carbon sequestration programs (e.g., Reducing Emissions from Deforestation and Forest Degradation (REDD and REDD+), cap-and-trade systems, self-reporting programs, and their associated monitoring, reporting and verification (MRV) frameworks depend upon data that are accurate, systematic, practical, and transparent. A sustained, observationally-driven carbon monitoring system using remote sensing data has the potential to significantly improve the relevant carbon cycle information base for the U.S. and world. Initiated in 2010, NASA's Carbon Monitoring System (CMS) project is prototyping and conducting pilot studies to evaluate technological approaches and methodologies to meet carbon monitoring and reporting requirements for multiple users and over multiple scales of interest. NASA's approach emphasizes exploitation of the satellite remote sensing resources, computational capabilities, scientific knowledge, airborne science capabilities, and end-to-end system expertise that are major strengths of the NASA Earth Science program. Through user engagement activities, the NASA CMS project is taking specific actions to be responsive to the needs of stakeholders working to improve carbon MRV frameworks. The first phase of NASA CMS projects focused on developing products for U.S. biomass/carbon stocks and global carbon fluxes, and on scoping studies to identify stakeholders and explore other potential carbon products. The second phase built upon these initial efforts, with a large expansion in prototyping activities across a diversity of systems, scales, and regions, including research focused on prototype MRV systems and utilization of COTS technologies. Priorities for the future include: 1) utilizing future satellite sensors, 2) prototyping with commercial off-the-shelf technology, 3) expanding the range of prototyping activities, 4) rigorous evaluation, uncertainty quantification, and error characterization, 5) stakeholder

  18. caracterisation des systemes de production a base d'anacardier

    African Journals Online (AJOL)

    AISA

    Mots clés : Systèmes de culture, anacardier, gestion des plantations, rentabilité économique, Bénin. .... qui élimine au fur et à mesure les variables .... regard à la performance des arbres. ..... le contrôle des mauvaises herbes et la meilleure.

  19. Carbon nanomaterials in biological systems

    Energy Technology Data Exchange (ETDEWEB)

    Pu Chun Ke [Laboratory of Single-Molecule Biophysics and Polymer Physics, Department of Physics and Astronomy, Clemson University, Clemson, SC 29634 (United States); Qiao Rui [Department of Mechanical Engineering, Clemson University, Clemson, SC 29634 (United States)

    2007-09-19

    This paper intends to reflect, from the biophysical viewpoint, our current understanding on interfacing nanomaterials, such as carbon nanotubes and fullerenes, with biological systems. Strategies for improving the solubility, and therefore, the bioavailability of nanomaterials in aqueous solutions are summarized. In particular, the underlining mechanisms of attaching biomacromolecules (DNA, RNA, proteins) and lysophospholipids onto carbon nanotubes and gallic acids onto fullerenes are analyzed. The diffusion and the cellular delivery of RNA-coated carbon nanotubes are characterized using fluorescence microscopy. The translocation of fullerenes across cell membranes is simulated using molecular dynamics to offer new insight into the complex issue of nanotoxicity. To assess the fate of nanomaterials in the environment, the biomodification of lipid-coated carbon nanotubes by the aquatic organism Daphnia magna is discussed. The aim of this paper is to illuminate the need for adopting multidisciplinary approaches in the field study of nanomaterials in biological systems and in the environment. (topical review)

  20. Carbon nanomaterials in biological systems

    International Nuclear Information System (INIS)

    Pu Chun Ke; Qiao Rui

    2007-01-01

    This paper intends to reflect, from the biophysical viewpoint, our current understanding on interfacing nanomaterials, such as carbon nanotubes and fullerenes, with biological systems. Strategies for improving the solubility, and therefore, the bioavailability of nanomaterials in aqueous solutions are summarized. In particular, the underlining mechanisms of attaching biomacromolecules (DNA, RNA, proteins) and lysophospholipids onto carbon nanotubes and gallic acids onto fullerenes are analyzed. The diffusion and the cellular delivery of RNA-coated carbon nanotubes are characterized using fluorescence microscopy. The translocation of fullerenes across cell membranes is simulated using molecular dynamics to offer new insight into the complex issue of nanotoxicity. To assess the fate of nanomaterials in the environment, the biomodification of lipid-coated carbon nanotubes by the aquatic organism Daphnia magna is discussed. The aim of this paper is to illuminate the need for adopting multidisciplinary approaches in the field study of nanomaterials in biological systems and in the environment. (topical review)

  1. Toward transformational carbon capture systems

    Energy Technology Data Exchange (ETDEWEB)

    Miller, David C. [National Energy Technology Laboratory, U.S. Dept. of Energy, Pittsburgh PA (United States); Litynski, John T. [Office of Fossil Energy, U.S. Dept. of Energy, Washington DC (United States); Brickett, Lynn A. [National Energy Technology Laboratory, U.S. Dept. of Energy, Pittsburgh PA (United States); Morreale, Bryan D. [National Energy Technology Laboratory, U.S. Dept. of Energy, Pittsburgh PA (United States)

    2015-10-28

    This paper will briefly review the history and current state of Carbon Capture and Storage (CCS) research and development and describe the technical barriers to carbon capture. it will argue forcefully for a new approach to R&D, which leverages both simulation and physical systems at the laboratory and pilot scales to more rapidly move the best technoogies forward, prune less advantageous approaches, and simultaneously develop materials and processes.

  2. Carbon transport in sodium systems

    International Nuclear Information System (INIS)

    Martin Espigares, M.; Lapena, J.; La Torre, M. de

    1983-01-01

    Carbon activities in dynamic non isothermal sodium system are determined using an equilibratium method. Foils of Fe-18 w% Cr-8 W% Ni alloy with low carbon content (in the as received condition) are exposed to dynamic liquid sodium in the temperature range between 450 0 C and 700 0 C. The analysis was used to evaluate the carburization-decarburization behaviour of type 304 stainless steel exposed to sodium. (author)

  3. High-purity metal-carbon eutectic systems as thermometric fixed points in the range from 1000 K to 3500 K; Des systemes eutectiques metal-carbone de grande purete comme points fixes de temperature dans l'intervalle 1000-3500 K

    Energy Technology Data Exchange (ETDEWEB)

    Bloembergen, P.; Yamada, Y.; Sasajima, N.; Yamamoto, N. [National Metrology Institute of Japan (NMIJ), AIST, Tsukuba (Japan); Torizuka, S.; Yoshida, N. [National Institute for Materials Science (NIMS), Tsukuba (Japan)

    2004-12-01

    A survey will be given of metal-carbon (M-C) and metal carbide-carbon (MC-C) systems presently in development for applications in thermometry in the range from 1000 K to about 3500 K. The advantages of these systems as fixed points at high temperatures as compared to systems relying on pure metals will be elucidated. Purification of the components making up the M-C or MC-C systems is a prerequisite to their implementation as reference fixed points in thermometry, requiring a high level of reproducibility of the eutectic temperature. To set an example a study on the effect of impurities on the eutectic transition of Fe-C is included in the survey. Experimentally obtained melting curves are compared with the curves calculated on the basis of a thermodynamic model, which includes the impurities in question as components. The calculations of the melting curves are based upon: (1) the Equilibrium solidification model and (2) the Scheil-Gulliver solidification model, which handle the effects of the impurities on the transition process in such a way that they may be assumed to set lower and upper boundaries to the associated melting ranges, respectively. We will conclude pointing out fields of common interest to materials science and thermometry within the realm of ultra-pure materials. (authors)

  4. Sedimentology of polar carbonate systems

    Science.gov (United States)

    Frank, T. D.; James, N. P.

    2013-12-01

    The key attributes, processes, and products associated with carbonate accumulation and diagenesis at tropical and temperate latitudes are well known. Comparatively little work has concentrated on carbonate deposition at the coldest end of the depositional spectrum, the polar shelves. Such deposits are not abundant, but they have the potential to provide unique insights into paleoceanographic and paleoclimatic conditions in regions of the planet that are arguably the most sensitive to global change. We examined skeletal assemblages, facies, stratigraphy, petrography, geochemistry, and diagenesis of Quaternary deposits from the Ross Sea, Antarctica and Permian counterparts from Gondwana (now eastern Australia). These modern and ancient polar carbonate factories possess several unique characteristics that set them apart from better-known systems of the temperate and tropical latitudes. All production is biogenic and there are no significant calcareous phototrophs. Carbonate communities are not capable of building rigid frameworks, and thus their deposits are prone to winnowing and reworking by waves and bottom currents. The seawater, although frigid, is isothermal, and thus deep-water benthic communities can exist near the surface. Carbonate saturation, which is at or below solubility for both aragonite and high-Mg calcite, plays a key role in determining the dominant mineralogy of benthos as well as the preservation potential of skeletal debris. As many taxa precipitate low-Mg calcite in isotopic equilibrium, deposits have potential to provide geochemical proxy information for use in paleoceanographic and paleoclimatic reconstructions. More than any other type of carbonate system, the slow biogenic carbonate production and accumulation in cold waters is achieved firstly by arresting siliciclastic sedimentation and secondly by increasing nutrient availability. Thus, carbonate deposition may occur during the coldest of times, such as during glacial advance when

  5. Implementation Cryptography Data Encryption Standard (DES) and Triple Data Encryption Standard (3DES) Method in Communication System Based Near Field Communication (NFC)

    Science.gov (United States)

    Ratnadewi; Pramono Adhie, Roy; Hutama, Yonatan; Saleh Ahmar, A.; Setiawan, M. I.

    2018-01-01

    Cryptography is a method used to create secure communication by manipulating sent messages during the communication occurred so only intended party that can know the content of that messages. Some of the most commonly used cryptography methods to protect sent messages, especially in the form of text, are DES and 3DES cryptography method. This research will explain the DES and 3DES cryptography method and its use for stored data security in smart cards that working in the NFC-based communication system. Several things that will be explained in this research is the ways of working of DES and 3DES cryptography method in doing the protection process of a data and software engineering through the creation of application using C++ programming language to realize and test the performance of DES and 3DES cryptography method in encrypted data writing process to smart cards and decrypted data reading process from smart cards. The execution time of the entering and the reading process data using a smart card DES cryptography method is faster than using 3DES cryptography.

  6. Influence des ions étrangers et de la matière organique sur la cristallisation des carbonates de calcium Influence of Foreign Ions and of Organic Matter on the Crystallization of Calcium Carbonates

    Directory of Open Access Journals (Sweden)

    Cailleau P.

    2006-11-01

    Full Text Available On présente les résultats d'un travail de recherche entrepris pour des aspects de la diagenèse des roches carbonatées : la cimentation cal le rôle est capital pour la conservation ou le colmatage de la porosit de ce type de sédiments. Après une synthèse bibliographique des connaissances actuelles sur et la cimentation du CaC03 en milieu naturel et en laboratoire, on a mentalement l'influence des ions étrangers et de la matière organique sur germination et la croissance des carbonates de calcium. Les principaux résultats obtenus peuvent se résumer comme suit a En ce qui concerne les ions étrangers. Leur action se traduit en général par une augmentation du temps de germination et une réduction de la vitesse de croissance des cristaux de CaCO3; l'apparition de faciès particuliers pour certains des minéraux formés ; l'inhibition des transformations d'une variété en une autre. On obtient un classement par ordre d'efficacité croissante action à peu près nulle: K+, CI-; action modérée : Bat+, Na+, AI3+, Cul+, Sr2+, SO2 , P0;-; action dominante de Mg'+. b Pour les matières organiques. Seules l'acide citrique et, dans une moindre mesure, l'acide tartrique, ont une influence notable, d'ailleurs analogue à celle des ions étrangers en ce qui concerne les cinétiques de germination et de croissance du CaCO. L'adsorption de certains de ces produits se traduit en outre par des faciès particuliers des minéraux formés et éventuellement par l'inhibition des transformations d'une variété en une autre. This article gives the results of a research project undertaken to study one of the aspects of the diagénesis of carbonate rocks, 1. e. calcite cementing, which plays a capital role in preserving or plugging up the original porosity of such sediments.After making a bibliographic synthesis of what is now known about the origin and cementation of CaC03 in a natural environment and in the laboratory, the article experimentally

  7. Contribution to the study of hard, low-density pyrolytic carbons; Contribution a l'etude des carbones pyrolytiques de variete dure et de faible densite

    Energy Technology Data Exchange (ETDEWEB)

    Boutin, F R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    Apparent contradictions in the properties of pyrolytic carbons obtained at 1600 deg C (hardness and graphitization) are studied. It is shown that structure of the deposit is turbostratic with high internal stresses ({delta}{sup -2}), and it graphitizes (by thermal treatment over 2000 deg C) in a similar manner to graphitisable carbon. Because the deposit forms lamellar compounds, it is presumed that the structure is similar to that of graphitisable carbon. Since it is not structure dependant, the hardness originates from the 'growth texture' and is not comparable with the hardness of a non-graphitisable carbon. The pyrolytic carbon studied is composed of regions, on the overage a few microns across, formed by the stacking of small carbon platelets, interlocked and showing a preferred orientation. The mis-orientation of the various regions produces general disorientation. We estimate that the introduction of the particles of some material such as thermal black which are observed in the electron microscope are responsible for the mis-orientation. The density and hardness of the deposit are a result of the interlocking of platelets, which creates a closed porosity and prevents any sliding of the atomic planes. (author) [French] On etudie les proprietes apparemment contradictoires du pyrocarbone 1600 deg C, durete et graphitabilite. On montre que le pyrocarbone possede la structure d'un carbone turbostratique a fort taux de distorsion et qu'il subit, par traitement a des temperatures superieures a 2000 deg C, une transformation de graphitation comparable a celle que l'on observe sur les cokes graphitables. Comme le pyrocarbone forme de plus des composes d'insertion, sa structure est comparable a celle d'un carbone graphitable. La durete, qui n'a pas d'origine structurale, est donc liee a la 'texture de croissance' du depot et ne peut etre comparee a celle d'un coke dur et non graphitable. Le pyrocarbone etudie est constitue de domaines, dont les dimensions sont de l

  8. Composite carbon fiber cables; Des cables composites en fibres de carbone

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2002-10-01

    In order to fulfill the requirements of offshore engineering, Freyssinet, a daughter company of the European Vinci group, has developed a series of high-performance carbon fiber cables. These composite materials have an excellent fatigue behaviour in a huge range of constraints. Moreover, their low weight allows the implementation of very long lengths of cables in marine environment with no loss in capacity. The specific weight of the current part of the cable is reduced by a factor of 4 with respect to an equivalent capacity armature made of steel. These materials were presented in June 2002 at the ultra deep engineering and technologies (UDET) exhibition of Brest (France). (J.S.)

  9. variabilite spatiale des rendements du riz en systeme de riziculture

    African Journals Online (AJOL)

    Madagascar qui a surtout gagné l'adhésion d'un nombre important de pratiquants à travers le monde. La pratique est basée sur de nouvelles méthodes de gestion du système Sol-Eau-. Plante qui, tout en réduisant l'utilisation des intrants chimiques, de l'eau et des semences, permet d'augmenter le rendement de 50 % ou.

  10. Molten carbonate fuel cell system

    Energy Technology Data Exchange (ETDEWEB)

    Ito, Yasuhiko; Kinoshita, Mamoru; Murakami, Shuzo; Furukawa, Nobuhiro

    1987-09-26

    Reformed gas or coal gasification gas, etc. is used as the fuel gas for fused carbonate fuel cells, however sulfuric compounds are contained in these gases and even after these gases have been treated beforehand through a desulfurizer, a trace quantity of H/sub 2/S is sent to a fuel electrode. Sulfur oxide which is formed at the time of burning and oxidating the exhaust gas from the fuel electrode is supplied together with the air to an oxygen electrode and becomes sulfate after substituting carbonate, which is the electrolyte of the electrode, causing deterioration of the cell characteristics and durability. With regard to a system that hydrogen rich gas which was reformed from the raw fuel is supplied to a fuel electrode, and its exhaust gas is oxidated through a burner to form carbon dioxide which is supplied together with the air to an oxygen electrode, this invention proposes the prevention of the aforementioned defects by providing at the down stream of the above burner a remover to trap with fused carbonate such sulfur compounds as SO/sub 2/ and SO/sub 3/ in the gas after being oxidated as above. (3 figs)

  11. Architecture and dynamic of lower Cretaceous carbonate platform in sultanate of Oman: correlations between seismic data and outcrop; Architecture et dynamique des systemes carbonates de la plate-forme Cretace inferieur du Sultanat d'Oman: correlations entre donnees de sismique et d'affleurement

    Energy Technology Data Exchange (ETDEWEB)

    Le Bec, A

    2004-12-15

    The Rayda Basin, located in northern Oman at the south-eastern passive margin of the Arabian plate, has been filled in by a pro-grading carbonate system during the Lower Cretaceous. The filling up basin realized to carbonate platform pro-gradation on 300 km. Pelagic facies represented with radiolarian chert and shallowing facies with erosive surface, mud-cracks and lagoonal mud, and displaying on seismic lines an alternation of high angle and low angle clinoforms at the 10's of kilometers scale. Detailed study of these two types of clinoforms in the nearby outcrops shows that the high angle system is dominated by high-energy, grainy facies (ooliths, rudists, stromatoporoids), while the low angle system is dominated by a low-energy, carbonate mud facies. Based on the subsurface (geometries) and outcrop (facies) data a regional depositional model is proposed for this system. The outcrop study is based on 14 measured sections (6764 meters), completed with photo panoramas, thin section analysis and geochemical analyses (carbonate and organic matter content). The subsurface dataset consists of several regional seismic lines, two high resolution 3D blocs, and is supported by core material The regional seismic lines allow to map out the position of the high and low angle clinoform belts. One high angle belt and two low angle belts are identified in the profiles. In outcrop at least one more high angle belt and one more low angle belt are present. These overall geometries probably define the large scale sequence organisation. At a smaller scale, the 3D blocs allow to show the detailed geometrical organisation of the clinoform belts. The outcrop sections provide critical sub-seismic scale data on the facies composition and depositional geometries. The high energy system of the steep clinoforms (angle estimated at several degrees), is probably a wave controlled barrier coastline system, while the muddy low angle clinoforms (angle < 0.5 degree) shows large convex and wide

  12. Architecture and dynamic of lower Cretaceous carbonate platform in sultanate of Oman: correlations between seismic data and outcrop; Architecture et dynamique des systemes carbonates de la plate-forme Cretace inferieur du Sultanat d'Oman: correlations entre donnees de sismique et d'affleurement

    Energy Technology Data Exchange (ETDEWEB)

    Le Bec, A.

    2004-12-15

    The Rayda Basin, located in northern Oman at the south-eastern passive margin of the Arabian plate, has been filled in by a pro-grading carbonate system during the Lower Cretaceous. The filling up basin realized to carbonate platform pro-gradation on 300 km. Pelagic facies represented with radiolarian chert and shallowing facies with erosive surface, mud-cracks and lagoonal mud, and displaying on seismic lines an alternation of high angle and low angle clinoforms at the 10's of kilometers scale. Detailed study of these two types of clinoforms in the nearby outcrops shows that the high angle system is dominated by high-energy, grainy facies (ooliths, rudists, stromatoporoids), while the low angle system is dominated by a low-energy, carbonate mud facies. Based on the subsurface (geometries) and outcrop (facies) data a regional depositional model is proposed for this system. The outcrop study is based on 14 measured sections (6764 meters), completed with photo panoramas, thin section analysis and geochemical analyses (carbonate and organic matter content). The subsurface dataset consists of several regional seismic lines, two high resolution 3D blocs, and is supported by core material The regional seismic lines allow to map out the position of the high and low angle clinoform belts. One high angle belt and two low angle belts are identified in the profiles. In outcrop at least one more high angle belt and one more low angle belt are present. These overall geometries probably define the large scale sequence organisation. At a smaller scale, the 3D blocs allow to show the detailed geometrical organisation of the clinoform belts. The outcrop sections provide critical sub-seismic scale data on the facies composition and depositional geometries. The high energy system of the steep clinoforms (angle estimated at several degrees), is probably a wave controlled barrier coastline system, while the muddy low angle clinoforms (angle < 0.5 degree) shows large convex and

  13. Marché du carbone et solutions de gestion intégrée des déchets ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Marché du carbone et solutions de gestion intégrée des déchets : étude de cas menée en Indonésie. Le Mécanisme de développement propre (MDP) prévu au Protocole de Kyoto signé en 1997 a le double objectif d'aider les pays en développement à connaître un développement durable (tel que défini par chaque pays) ...

  14. Recovery of sludge from the treatment of liquid radioactive effluents by co-precipitation with calcium carbonate: laboratory study; Recuperation des boues de traitement des effluents radioactifs liquides par coprecipitation avec le carbonate de calcium: etude de laboratoire

    Energy Technology Data Exchange (ETDEWEB)

    Patti, F.; Gailledreau, C.; Cohen, P.

    1961-02-24

    As during the treatment by co-precipitation with calcium carbonate of liquid radioactive residues, a partial decontamination can be obtained by simply agitating an already formed radioactive sludge with the effluent to be processed, the authors study whether it would be possible to first perform a co-precipitation with a lower dose of calcium carbonate and then to complete decontamination by agitating with an adequate quantity of sludge stored during preceding operations. The authors report the study of the influence of reactant quantity on the chemical treatment efficiency, of the evolution of the activity of a radioactive residual solution in contact with a precipitate, of the cleaner element, of a precipitate reuse, of the technological and economic aspects, and of another possibility of reduction of the precipitate volume [French] Dans le traitement par coprecipitation avec le carbonate de calcium des residus radioactifs liquides, une decontamination partielle peut etre obtenue en agitant simplement une boue radioactive deja formee avec l'effluent a traiter. En consequence, il pourrait etre possible d'effectuer d'abord une coprecipitation avec une dose plus faible de carbonate de calcium et de completer ensuite la decontamination en agitant le liquide avec une quantite convenable de boue stockee a partir d'operations precedentes. (auteurs)

  15. A tree biomass and carbon estimation system

    Science.gov (United States)

    Emily B. Schultz; Thomas G. Matney; Donald L. Grebner

    2013-01-01

    Appropriate forest management decisions for the developing woody biofuel and carbon credit markets require inventory and growth-and-yield systems reporting component tree dry weight biomass estimates. We have developed an integrated growth-and-yield and biomass/carbon calculator. The objective was to provide Mississippi’s State inventory system with bioenergy economic...

  16. Study of the behaviour of organic carbon in the soil, and carbon 14 study of podzols; Contribution a l'etude du comportement du carbone organique dans le sol et etude des podzols a l'aide du carbone 14

    Energy Technology Data Exchange (ETDEWEB)

    Nakhla Shawki, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    Using the penetration into soil of carbon 14 of thermo-nuclear origin, the behaviour and renewal rate were studied on different organic fractions of the soil. It was established that 18% of the total organic matter is renewed in about 400 years. In addition the formation of podzol-type fossil soils in France was dated from the first millenary B.C., i.e. the end of the sub-boreal period and the beginning of the atlantic period. (author) [French] En utilisant la penetration dans le sol du carbone 14 d'origine thermonucleaire, on a etudie le comportement et la vitesse de renouvellement des differentes fractions de la matiere organique du sol. On a pu preciser que 18% de la matiere organique globale se renouvelait en 400 ans environ. Par ailleurs, la formation en France des sols fossiles du type podzol a ete datee du premier millenaire avant J.C. c'est a dire a la fin de la periode subboreale et au debut de la periode atlantique. (auteur)

  17. Caracterisation pratique des systemes quantiques et memoires quantiques auto-correctrices 2D

    Science.gov (United States)

    Landon-Cardinal, Olivier

    Cette these s'attaque a deux problemes majeurs de l'information quantique: - Comment caracteriser efficacement un systeme quantique? - Comment stocker de l'information quantique? Elle se divise done en deux parties distinctes reliees par des elements techniques communs. Chacune est toutefois d'un interet propre et se suffit a elle-meme. Caracterisation pratique des systemes quantiques. Le calcul quantique exige un tres grand controle des systemes quantiques composes de plusieurs particules, par exemple des atomes confines dans un piege electromagnetique ou des electrons dans un dispositif semi-conducteur. Caracteriser un tel systeme quantique consiste a obtenir de l'information sur l'etat grace a des mesures experimentales. Or, chaque mesure sur le systeme quantique le perturbe et doit done etre effectuee apres avoir reprepare le systeme de facon identique. L'information recherchee est ensuite reconstruite numeriquement a partir de l'ensemble des donnees experimentales. Les experiences effectuees jusqu'a present visaient a reconstruire l'etat quantique complet du systeme, en particulier pour demontrer la capacite de preparer des etats intriques, dans lesquels les particules presentent des correlations non-locales. Or, la procedure de tomographie utilisee actuellement n'est envisageable que pour des systemes composes d'un petit nombre de particules. Il est donc urgent de trouver des methodes de caracterisation pour les systemes de grande taille. Dans cette these, nous proposons deux approches theoriques plus ciblees afin de caracteriser un systeme quantique en n'utilisant qu'un effort experimental et numerique raisonnable. - La premiere consiste a estimer la distance entre l'etat realise en laboratoire et l'etat cible que l'experimentateur voulait preparer. Nous presentons un protocole, dit de certification, demandant moins de ressources que la tomographie et tres efficace pour plusieurs classes d'etats importantes pour l'informatique quantique. - La seconde

  18. Immiscible displacements in vuggy carbonates: experiments and simulation; Deplacements immiscibles dans des carbonates vacuolaires: experimentation et modelisation

    Energy Technology Data Exchange (ETDEWEB)

    Moctezuma Berthier, A.E.

    2003-07-01

    In the case of the vuggy carbonate rocks, we cannot interpret the experimental results by techniques developed For homogeneous porous media since the data reflect the effect of heterogeneities associated to the structure and to the interconnection of their porosity systems. The objective of this work is to propose new methodologies of characterization of the carbonates with bimodal porosity, as well as improved predictions of the transport properties in multiphase flow. Experimental and modelling work was conducted. A new methodology was proposed for the characterization of the bimodal structure on the pore scale which consists of a combination of centrifugation, nuclear magnetic resonance and mercury porosimetry. It was shown that it is possible to determine the pore sizes as well as the throat sizes which are the input data of the network models. The difference in connectivity of the structure influences the form of the displacement fronts as well as drainage/imbibition hysteresis. When the vugs are not connected, the front is of piston type and in the opposite case, of diffusive type. It was also showed that when the vugs are connected, there is a large hysteresis on the two phases whereas, when the vugs communicate only through the matrix, the hysteresis is less important. On the pore scale, we studied the effect of the vuggy field on the macroscopic properties using reconstructed porous media. We generalized the reconstruction method for vug systems. The numerical conductivity was found to be independent of the porosity distribution of the media; an empirical model was proposed. We showed that permeability is influenced by the vugs connectivity. If the vuggy system is not percolating, the matrix controls the permeability. An empirical model was proposed which considers vug porosity and the ratio of the characteristic scales between the matrix and the vugs. Under biphasic conditions, we showed that the relative permeability of the non-wetting phase is affected

  19. Studies of iron carbon alloys; Contribution a l'etude des alliages dilues de carbone dans le fer {alpha}

    Energy Technology Data Exchange (ETDEWEB)

    Anagnostopoulos, T [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1971-07-01

    Precipitation of carbon in {alpha} iron during a thermal treatment was followed using the magnetic after effect. A study was made of the influence of different parameters such as quenching speed, annealing rate, carbon concentration with or without impurity, irradiation effects. A transient sur-saturation occurs during dissolution of carbon in iron at 500 C. (author) [French] La precipitation du carbone dans le fer au cours d'un traitement thermique a ete suivie au moyen du trainage magnetique. L'etude de differents parametres tels que: vitesse de trempe, mode de recuit, concentration en carbone, presence d'impuretes, effet d'une irradiation, ont ete menes a bien. Un phenomene de sursaturation transitoire au cours de la remise en solution a 500 C a ete mis en evidence. (auteur)

  20. Electromechanical properties of multi-walled carbon nano-tubes; Proprietes electromecaniques des nanotubes de carbone multiparois

    Energy Technology Data Exchange (ETDEWEB)

    Lefevre, R

    2005-12-15

    In this PhD thesis, we tackled theoretically and experimentally the problem of designing nano-electromechanical systems (NEMS) based on multi-walled carbon nano-tubes (MWCNTs). Furthermore, we applied our know-how to perform components like switches. We developed a theoretical model to describe the deflection of a suspended MWCNT stressed by an attractive electrostatic force. Our model highlights a scaling law linking up the electrostatic deflection, geometrical, electrical and physical parameters of MWCNTs based NEMS. This result constitutes a practical designing tool because it predicts their electromechanical behaviour on a 'large' range of operational parameters. At the same time, we developed several processes to fabricate nano-structures incorporating a suspended MWCNT electrostatically actuated. Among these different structures, the simplest was used to develop a method for probing electromechanical properties of MWCNTs. Our method is based on atomic force microscopy measurements on a doubly clamped suspended MWCNT electrostatically deflected by a drive voltage. These measurements show clearly for different MWCNTs (different diameter and length) the existence of such scaling law in agreement with the continuum model prediction. From these results, we extracted the Young's modulus of MWCNTs. For diameters smaller than 30 nm it is constant and its average value equals 400 GPa. Above, we observed a strong decrease that could be explained by the entry in a non-linear regime of deformation. Finally, we show the realization of an electromechanical switch based on a suspended MWCNT which presents good switching behaviour. (author)

  1. Electromechanical properties of multi-walled carbon nano-tubes; Proprietes electromecaniques des nanotubes de carbone multiparois

    Energy Technology Data Exchange (ETDEWEB)

    Lefevre, R.

    2005-12-15

    In this PhD thesis, we tackled theoretically and experimentally the problem of designing nano-electromechanical systems (NEMS) based on multi-walled carbon nano-tubes (MWCNTs). Furthermore, we applied our know-how to perform components like switches. We developed a theoretical model to describe the deflection of a suspended MWCNT stressed by an attractive electrostatic force. Our model highlights a scaling law linking up the electrostatic deflection, geometrical, electrical and physical parameters of MWCNTs based NEMS. This result constitutes a practical designing tool because it predicts their electromechanical behaviour on a 'large' range of operational parameters. At the same time, we developed several processes to fabricate nano-structures incorporating a suspended MWCNT electrostatically actuated. Among these different structures, the simplest was used to develop a method for probing electromechanical properties of MWCNTs. Our method is based on atomic force microscopy measurements on a doubly clamped suspended MWCNT electrostatically deflected by a drive voltage. These measurements show clearly for different MWCNTs (different diameter and length) the existence of such scaling law in agreement with the continuum model prediction. From these results, we extracted the Young's modulus of MWCNTs. For diameters smaller than 30 nm it is constant and its average value equals 400 GPa. Above, we observed a strong decrease that could be explained by the entry in a non-linear regime of deformation. Finally, we show the realization of an electromechanical switch based on a suspended MWCNT which presents good switching behaviour. (author)

  2. integrated vertical photobioreactor system for carbon dioxide

    African Journals Online (AJOL)

    Astri Nugroho

    2013-07-02

    Jul 2, 2013 ... efficient system for converting carbon dioxide (CO2) into biomass. The use of ... often been thought to achieve the most efficient mixing and the best ... such process a photobioreactor is designed. Photobioreactor is a device ...

  3. Analyse multi-échelle du comouvement entre les prix du quota carbone, du crédit carbone, et des produits énergétiques

    OpenAIRE

    Nsouadi, Clarda

    2016-01-01

    The purpose of this thesis is to contribute to the understanding of the carbon price quota structure, the analysis of its fluctuation, and the interactions that may exist between on the one hand the EU system of emission quota exchange (ETS) and the mechanism for clean development (CDM) and on the other hand between carbon quota market and the quota in the energy sector. For this study, we introduced the hypothesis of heterogeneity of agents' behavior on the carbon market where coexist multip...

  4. Enjeux juridiques du contrôle des émissions personnelles de gaz à effet de serre par un dispositif de carte carbone

    Directory of Open Access Journals (Sweden)

    Sandrine Rousseaux

    2011-02-01

    Full Text Available La carte carbone individuelle est un dispositif innovant, qui permet d’impliquer les particuliers dans la lutte face au changement climatique. Ce dispositif consiste à limiter leurs émissions de gaz à effet de serre, ce qui suppose de suivre leur consommation de certains produits et services. Ce mode de contrôle des émissions personnelles soulève parfois des controverses, la carte carbone pouvant être perçue comme un instrument de rationnement potentiellement liberticide. Ces deux aspects sont discutés sur la base d’une analyse comparative de la conception et des modalités de mise en œuvre des différents dispositifs de carte carbone, établis ou envisagés en Europe et aux États-Unis. Il en ressort que les controverses ne sont pas réellement fondées.The individual carbon card is an innovative mechanism that helps involve individuals in the fight against climate change. It consists in limiting their greenhouse gas emissions, which requires monitoring a part of their goods and services consumption. This method of personal emissions control is much debated since the carbon card may be perceived as a rationing tool and raises civil liberty issues. Both of these controversial aspects are discussed on the basis of a comparative analysis of how the various carbon card programs, established or contemplated in Europe and in the USA, are designed and implemented. The findings are these controversies are somewhat groundless.

  5. Differential systems of flux and concentrations of a mixture in the separation by a plant (1963); Systemes differente des flux et des concentrations d'un melange en separation par une usine etagee (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Bouligand, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-11-15

    The study of transient flux and concentrations of a mixture in the separation by a plant with different interdependent stages leads to an examination of the solutions of certain types of differential systems. These systems are obtained from the representative graph of the plant and have a structural form. By Olga TAUSSKY's theorem and the introduction of steerable distances, the solutions of these systems are chiefly examined in their asymptotic behaviour. The appendix shows that solutions of partial differential equations relative to plants made of cascades with a slight separation have analogous properties. (author) [French] La recherche des regimes transitoires des flux et des concentrations d'un melange en separation par une usine etagee de forme quelconque conduit a etudier les solutions de certains types de systemes differentiels. Ces systemes sont deduits du graphe representatif de l'usine, et apparaissent sous une forme structuree. A l'aide du theoreme d'Olga TAUSSKY et par l'introduction d'ecarts orientes, les solutions de ces systemes sont principalement examinees dans leur comportement asymptotique. Un appendice montre que les solutions des systemes d'equations aux derivees partielles des usines en cascades a tres faible separation admettent des proprietes analogues. (auteur)

  6. Sentinel-Lymphknoten-Biopsie des Melanoms mittels Indocyaningrün und "FOVIS"-System.

    Science.gov (United States)

    Göppner, Daniela; Nekwasil, Stephan; Jellestad, Anne; Sachse, Alexander; Schönborn, Karl-Heinz; Gollnick, Harald

    2017-02-01

    Der Nachweis metastatischer Infiltrate im Sentinel-Lymphkoten (SLN) gilt als wesentlicher prognostischer Faktor des Melanoms. Alternativ zur Farbstoffmethode mit Patentblau zum Goldstandard der SLN-Biopsie (SLNB) mittels Radiokolloid wird die fluoreszenzoptische Darstellung mit Hilfe von Indocyaningrün (ICG) und Nahinfrarot (NIR)-Kamerasystem kommuniziert. Im Vergleich zur konventionellen Methode wurde die Wertigkeit des ICG-/NIR-Verfahrens in Abhängigkeit vom Body-Mass-Index (BMI) des Patienten und der Konzentration von ICG bezüglich der Visualisierung des Lymphabstroms und des SLNs untersucht. An zehn Patienten wurde die SLNB mittels Technetium-99m, Patentblau und ICG durchgeführt. Die Fluoreszenz-Darstellung von Lymphbahnen und SLN erfolgte in Echtzeit mittels der NIR-Kameratechnik "FOVIS". Je nach erzielter Bildqualität wurde ICG in einer Dosis von 0,25 mg bis 2,5 mg intrakutan appliziert. Neun der zehn SLN wurden fluoreszenzoptisch identifiziert (90 %), alle zehn radioaktiv (100 %), nur acht (80 %) mittels ICG-Grünfärbung bzw. Patenblau-Markierung. Transdermal wurde ein SLN dargestellt (10 %). In Korrelation zum BMI waren höhere ICG-Mengen, bis zu 2,5 mg intrakutan absolut, in der Darstellung der Lymphbahnen von Vorteil. Die SLN-Fluoreszenzmarkierung mit dem ICG/NIR-Kamera-System "FOVIS" stellt eine sichere Alternative zur Farbstoffmethode mit Patentblau ergänzend zur Radiokolloidmethode mit Technetium-99m dar. Weitere Studien zur optimalen Dosierung von ICG und transdermalen Bildgebung in Relation zum BMI sind notwendig. © 2017 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  7. Environmental management control systems for carbon emissions

    Directory of Open Access Journals (Sweden)

    Nadia Di Giacomo

    2017-04-01

    Full Text Available Purpose – This paper aims to focus on a global consulting company and examine how it struggled to establish an effective environmental management control system for carbon emissions for its employees’ air travel. The organisation was motivated to reduce its carbon emissions both to comply with regulation and to enhance or maintain corporate reputation. Design/methodology/approach – The paper takes a case study approach, examining internal and external documents as well as conducting interviews with senior staff. Findings – The case study investigates how Beta’s management implemented a system to reduce carbon emissions. The organisation focused on air travel, but the study finds that employee travel preferences did not radically change. Rather than reduction in carbon emissions, as planned by head office, air travel carbon emissions actually increased during the period, and, as a consequence, the reported reduction targets were significantly adjusted downwards to meet the new realities. Practical implications – The study has implications for both policy and practice for organisations seeking to improve their sustainability performance. Originality/value – The study responds to calls in the literature to undertake research to identify how management practices might reduce negative sustainability impacts, as there is little evidence of what management practices and accounting tools are being adopted, particularly in relation to carbon emissions from air travel. The paper adds to the creation of new accounting, giving visibility to carbon emission management through case study analysis.

  8. The synchronous long-stator propulsion system for TRANSRAPID; Langstator-Synchronmotorantrieb des TRANSRAPID

    Energy Technology Data Exchange (ETDEWEB)

    Henning, U [Siemens AG Verkehrstechnik, Erlangen (Germany). Geschaeftsgebiet Fahrzeuge Fernverkehr; Kamp, P G [Siemens AG, Erlangen (Germany). Projektierung und Entwicklung von Stromrichtergeraeten fuer die Bahnstromversorgung; Hochleitner, J [Siemens AG, Erlangen (Germany). Abt. Kombinationstechnik

    1996-12-31

    The synchronous long-stator motor for the maglev vehicle TRANSRAPID is a propulsion system with proven service maturity. The following paper describes the structure of the propulsion system proposed for maglev revenue service lines and how it meets the requirements for modular design, operation of several vehicles on one line, double-end feeding of power from adjacent substations, as well as for optimum maglev operation with minimum fault susceptibility. The overall concept is described and prototypes incorporating new technologies are presented for the various subsystems and components. The main focus is on the converter and control systems. (orig.) [Deutsch] Der Langstator-Synchronmotorantrieb des TRANSRAPID stellt ein einsatzreifes System dar. Die fuer Anwendungsstrecken entwickelte Struktur des Antriebssystems wird beschrieben. Mit ihr werden die Einsatzanforderungen wie modulare Gestaltung, Betrieb mehrerer Fahrzeuge auf eine Strecke, Doppelspeisung aus benachbarten Unterwerken sowie optimaler und stoerungsarmer Betrieb erfuellt. Neben der Beschreibung des Gesamtkonzeptes werden auch Prototypen fuer Teilsysteme und Komponenten auf der Basis fortschrittlicher Technologien vorgestellt. Schwerpunkte sind dabei Umrichter- und Regelungstechnik. (orig.)

  9. Soil carbon pools in different pasture systems

    Directory of Open Access Journals (Sweden)

    Francisco M. Cardozo, Jr.

    2016-03-01

    Full Text Available The aim of this study was to assess the carbon pools of a tropical soil where the native forest was replaced with different pasture systems. We studied five pasture production systems, including four monoculture systems with forage grasses such as Andropogon, Brachiaria, Panicum, and Cynodon, and an agroforestry system as well as a native vegetation plot. Greater availability of fulvic acid was detected in the agroforestry system as compared with that in the other systems. Higher lability of C was detected in the Andropogon system during the dry and rainy seasons and during the dry season in Cynodon. During the dry season, all pastures systems showed deficits in the net removal of atmospheric CO2. The structure and practices of the agroforestry system enables more carbon to be sequestered in the soil as compared with the monoculture pasture, suggesting that it is an important practice to mitigate climatic change and to improve soil quality.

  10. Advanced Thermal Protection Systems (ATPS), Aerospace Grade Carbon Bonded Carbon Fiber Material, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Carbon bonded carbon fiber (CBCF) insulating material is the basis for several highly successful NASA developed thermal protection systems (TPS). Included among...

  11. Jet Riemann-Lagrange Geometry Applied to Evolution DEs Systems from Economy

    OpenAIRE

    Neagu, Mircea

    2007-01-01

    The aim of this paper is to construct a natural Riemann-Lagrange differential geometry on 1-jet spaces, in the sense of nonlinear connections, generalized Cartan connections, d-torsions, d-curvatures, jet electromagnetic fields and jet Yang-Mills energies, starting from some given non-linear evolution DEs systems modelling economic phenomena, like the Kaldor model of the bussines cycle or the Tobin-Benhabib-Miyao model regarding the role of money on economic growth.

  12. Satellite Based Cropland Carbon Monitoring System

    Science.gov (United States)

    Bandaru, V.; Jones, C. D.; Sedano, F.; Sahajpal, R.; Jin, H.; Skakun, S.; Pnvr, K.; Kommareddy, A.; Reddy, A.; Hurtt, G. C.; Izaurralde, R. C.

    2017-12-01

    Agricultural croplands act as both sources and sinks of atmospheric carbon dioxide (CO2); absorbing CO2 through photosynthesis, releasing CO2 through autotrophic and heterotrophic respiration, and sequestering CO2 in vegetation and soils. Part of the carbon captured in vegetation can be transported and utilized elsewhere through the activities of food, fiber, and energy production. As well, a portion of carbon in soils can be exported somewhere else by wind, water, and tillage erosion. Thus, it is important to quantify how land use and land management practices affect the net carbon balance of croplands. To monitor the impacts of various agricultural activities on carbon balance and to develop management strategies to make croplands to behave as net carbon sinks, it is of paramount importance to develop consistent and high resolution cropland carbon flux estimates. Croplands are typically characterized by fine scale heterogeneity; therefore, for accurate carbon flux estimates, it is necessary to account for the contribution of each crop type and their spatial distribution. As part of NASA CMS funded project, a satellite based Cropland Carbon Monitoring System (CCMS) was developed to estimate spatially resolved crop specific carbon fluxes over large regions. This modeling framework uses remote sensing version of Environmental Policy Integrated Climate Model and satellite derived crop parameters (e.g. leaf area index (LAI)) to determine vertical and lateral carbon fluxes. The crop type LAI product was developed based on the inversion of PRO-SAIL radiative transfer model and downscaled MODIS reflectance. The crop emergence and harvesting dates were estimated based on MODIS NDVI and crop growing degree days. To evaluate the performance of CCMS framework, it was implemented over croplands of Nebraska, and estimated carbon fluxes for major crops (i.e. corn, soybean, winter wheat, grain sorghum, alfalfa) grown in 2015. Key findings of the CCMS framework will be presented

  13. Modelling carbon emissions in electric systems

    International Nuclear Information System (INIS)

    Lau, E.T.; Yang, Q.; Forbes, A.B.; Wright, P.; Livina, V.N.

    2014-01-01

    Highlights: • We model carbon emissions in electric systems. • We estimate emissions in generated and consumed energy with UK carbon factors. • We model demand profiles with novel function based on hyperbolic tangents. • We study datasets of UK Elexon database, Brunel PV system and Irish SmartGrid. • We apply Ensemble Kalman Filter to forecast energy data in these case studies. - Abstract: We model energy consumption of network electricity and compute Carbon emissions (CE) based on obtained energy data. We review various models of electricity consumption and propose an adaptive seasonal model based on the Hyperbolic tangent function (HTF). We incorporate HTF to define seasonal and daily trends of electricity demand. We then build a stochastic model that combines the trends and white noise component and the resulting simulations are estimated using Ensemble Kalman Filter (EnKF), which provides ensemble simulations of groups of electricity consumers; similarly, we estimate carbon emissions from electricity generators. Three case studies of electricity generation and consumption are modelled: Brunel University photovoltaic generation data, Elexon national electricity generation data (various fuel types) and Irish smart grid data, with ensemble estimations by EnKF and computation of carbon emissions. We show the flexibility of HTF-based functions for modelling realistic cycles of energy consumption, the efficiency of EnKF in ensemble estimation of energy consumption and generation, and report the obtained estimates of the carbon emissions in the considered case studies

  14. Electroencephalographic changes in the lateral septum complex following systemic administration of DES-TYR1 -[alpha]-endorphin, Des-Tyr1-[gamma]-endorphin and haloperidol in rats

    NARCIS (Netherlands)

    Urban, I.J.A.; Wied, D. de

    1982-01-01

    The influence of systemically administered Des-Tyr1-α-endorphin (DTαE), Des-Tyr1-γ-endorphin (DTγE) and haloperidol on electroencephalographic (EEG) activity of the lateral septum complex (LSC) and the frontal cortex was studied in male rats. DTαE (2 μg) significantly increased whereas DTγE (10 μg)

  15. Biomasse et stocks de carbone des forêts tropicales africaines (synthèse bibliographique

    Directory of Open Access Journals (Sweden)

    Loubota Panzou, GJ.

    2016-01-01

    Full Text Available Biomass and carbon stocks of tropical African forests. A review. Introduction. Quantifying the biomass and carbon stocks contained in tropical forests has become an international priority for the implementation of the REDD+ mechanism. Forest biomass is estimated at three successive levels: the tree, the stand and the region level. This paper reviews the state of the art regarding the estimation of biomass and carbon stocks in tropical African forests. Literature. This review highlights the fact that very few allometric equations, equations used for estimating the biomass of the tree using non-destructive measurements (diameter, height, have been established for tropical African forests. At the stand level, the review highlights the spatial and temporal variations in biomass between forest types in Central and Eastern Africa. While biomass recovery after a disturbance (logging, for instance is rather quick, a great deal of uncertainty still remains regarding the spatial variation in biomass, and there is no consensus on a regional biomass map. The quality of biomass mapping in tropical Africa strongly depends on the type of remotely-sensed data being used (optical, RADAR or LIDAR, and the allometric equation used to convert forest inventory data into biomass. Conclusions. Based on the lack of precision of the available allometric equations and forest inventory data and the large spatial scale involved, many uncertainties persist in relation to the estimation of the biomass and carbon stocks contained in African tropical forests.

  16. A study of point defects created by electron irradiation of dilute iron-carbon alloys; Etude des defauts crees par irradiation electronique dans les alliages de fer carbone dilues

    Energy Technology Data Exchange (ETDEWEB)

    Leveque, J L [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-10-01

    Resistivity and magnetic after effect (m.a.e.) measurements are used to study the influence of carbon atoms on the annealing process of point defects created by electron irradiation (3 MeV) at low temperature (20 deg. K). The presence of the carbon atoms has a strong influence on the recovery sub-stage I{sub E} and stage III. For the former, the carbon impurity traps the freely migrating iron interstitial. For the latter the effect is interpreted as being due to formation during annealing, of a carbon vacancy pair. A pronounced m.a.e. band is attributed to the reorientation of this carbon vacancy complex. All these results are coherent with the interpretation of a low temperature migrating free interstitial. (author) [French] L'influence des atomes de carbone sur le recuit des defauts ponctuels crees par irradiation electronique (3 MeV) a basse temperature (20 deg. K) dans le fer est mise en evidence par des mesures de resistivite electrique, et de trainage magnetique. Cette influence se manifeste principalement au cours du sous stade I{sub E} et du stade III de resistivite. Au sous stade I{sub E} les atomes de carbone piegeraient les interstitiels libres de fer au cours de leur migration. Le stade III est interprete comme etant du a la recombinaison du carbone dans les lacunes. Une importante bande de tramage magnetique etant attribuee a la reorientation de ce complexe. Ces resultats sont coherents avec l'interpretation faisant migrer a basse temperature l'interstitiel libre. (auteur)

  17. Renouvellement du carbone profond des sols cultivés : une estimation par compilation de données isotopiques

    Directory of Open Access Journals (Sweden)

    Balesdent, J.

    2017-01-01

    Full Text Available Turnover of deep organic carbon in cultivated soils: an estimate from a review of isotope data. Description of the subject. This study is an estimate of medium-term renewal (decades of deep carbon in cultivated soils. Objectives. Sequestration of organic carbon in soils is a way to mitigate the global rise in CO2 and warming. Deep horizons (> 30 cm contain about half of the soil organic carbon but, in agriculture, deep organic carbon and nitrogen are often neglected when the balance of these elements is calculated. Our goal in this study was to propose a quantification of deep C turnover. Method. We collected data from 41 profiles, where C turnover was studied using the natural 13C labeling technique. The studied cropping systems were basically tropical and temperate C4 plant monocultures. Results. Deep carbon (30 – 100 cm turnover was on average four times slower than in topsoil (0 – 30 cm, but renewal was significant. The average depth-distribution of the carbon flux to organic matter build-up was 81% in the layer at the 0 – 30 cm level and 19% in the layer at 30 – 100 cm, with a standard error of ± 4%. Over the longer term (20 years, subsoil at 30 – 100 cm contained on average 23% of the recent soil carbon accumulated in the first meter. Conclusions. Deep organic matter should not be overlooked when considering the balance of C and N and we therefore propose a simple method for an initial first assessment. In the future, further estimates of the temporal evolution of the deep carbon stock and its factors of variation should be based on long-term agronomic experiments or modeling parameterized on heavily instrumented sites, and should be accompanied by detailed pedological descriptions.

  18. Developpement du systeme de gestion des ressources humaines ...

    African Journals Online (AJOL)

    Health workers are facing several problems in order to be successful in their interventions. Lacs Health District faced different issues in human resources management (HRM) and a lot what done to deal with them. In order to sustain, it is important to know the level of its human resources management systems development.

  19. A study on the isotope effects in the reduction of carbon dioxide by zinc; Etude des effets isotopiques dans la reduction du gaz carbonique par le zinc

    Energy Technology Data Exchange (ETDEWEB)

    Senegacnik, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-06-15

    We have determined the isotope effects which occur in the reduction of carbon dioxide by zinc. It has been shown that in the case of irreversible surface reactions, Bernstein's equation which permits the calculation of the fractionation factor is still valid. These experimental factors are in good agreement with those obtained by calculating the partition functions of the adsorbed activated complexes. In the reaction mechanism used, the model of the activated complex corresponds to the dissociation of one of the carbon oxygen bonds CO{sub 2} {yields} CO + O. Perturbations arising from the slight reversibility of the reaction Zn + CO{sub 2} {r_reversible} ZnO + CO on the isotope effects on the carbon and oxygen atoms have also been calculated. (author) [French] Nous avons etudie les effets isotopiques qui ont lieu dans la reduction du gaz carbonique par le zinc. La validite de l'equation de Bernstein qui permet de calculer le facteur de fractionnement a ete demontree pour le cas d'une reaction irreversible de surface. Ces facteurs de fractionnement experimentaux sont en bon accord avec ceux obtenus par le calcul des fonctions de partition isotopiques des complexes actives adsorbes. Dans le mecanisme de reaction utilise, le modele du complexe active correspond a la dissociation d'une des liaisons carbone oxygene CO{sub 2} {yields} CO + O. Les effets perturbateurs de la reversibilite de la reduction Zn + CO{sub 2} {r_reversible} ZnO + CO sur les effets isotopiques du carbone et ceux de l'oxygene ont ete egalement evalues. (auteur)

  20. A study on the isotope effects in the reduction of carbon dioxide by zinc; Etude des effets isotopiques dans la reduction du gaz carbonique par le zinc

    Energy Technology Data Exchange (ETDEWEB)

    Senegacnik, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-06-15

    We have determined the isotope effects which occur in the reduction of carbon dioxide by zinc. It has been shown that in the case of irreversible surface reactions, Bernstein's equation which permits the calculation of the fractionation factor is still valid. These experimental factors are in good agreement with those obtained by calculating the partition functions of the adsorbed activated complexes. In the reaction mechanism used, the model of the activated complex corresponds to the dissociation of one of the carbon oxygen bonds CO{sub 2} {yields} CO + O. Perturbations arising from the slight reversibility of the reaction Zn + CO{sub 2} {r_reversible} ZnO + CO on the isotope effects on the carbon and oxygen atoms have also been calculated. (author) [French] Nous avons etudie les effets isotopiques qui ont lieu dans la reduction du gaz carbonique par le zinc. La validite de l'equation de Bernstein qui permet de calculer le facteur de fractionnement a ete demontree pour le cas d'une reaction irreversible de surface. Ces facteurs de fractionnement experimentaux sont en bon accord avec ceux obtenus par le calcul des fonctions de partition isotopiques des complexes actives adsorbes. Dans le mecanisme de reaction utilise, le modele du complexe active correspond a la dissociation d'une des liaisons carbone oxygene CO{sub 2} {yields} CO + O. Les effets perturbateurs de la reversibilite de la reduction Zn + CO{sub 2} {r_reversible} ZnO + CO sur les effets isotopiques du carbone et ceux de l'oxygene ont ete egalement evalues. (auteur)

  1. About the safety of lithium batteries with carbon anode; De la securite des accumulateurs au lithium a anode de carbone

    Energy Technology Data Exchange (ETDEWEB)

    Biensan, Ph.; Le Nay, F. [SAFT, Direction de la Recherche, 91 - Marcoussis (France); Simon, B. [Alcatel Alsthom Recherche, 91 - Marcoussis (France); Bodet, J.M. [SAFT, Advanced and Industrial Battery Group, 86 - Poitiers (France)

    1996-12-31

    The replacement of lithium metal from the negative electrode of lithium batteries by a material allowing the reversible insertion of lithium ions is an undeniable commercial success. Carbon electrodes, generally called Li{sub x}C{sub 6}, are the most common type and allow to increase the service life of the battery, its charging fastness and its safety. The safety of such batteries is well known in normal conditions of use, but it has to be known also in any abusive condition of use, whatever is the charging state. The mastery of the phenomena that can occur requires a good knowledge of the kinetics of the exothermal chemical reactions involved. (J.S.) 8 refs.

  2. About the safety of lithium batteries with carbon anode; De la securite des accumulateurs au lithium a anode de carbone

    Energy Technology Data Exchange (ETDEWEB)

    Biensan, Ph; Le Nay, F [SAFT, Direction de la Recherche, 91 - Marcoussis (France); Simon, B [Alcatel Alsthom Recherche, 91 - Marcoussis (France); Bodet, J M [SAFT, Advanced and Industrial Battery Group, 86 - Poitiers (France)

    1997-12-31

    The replacement of lithium metal from the negative electrode of lithium batteries by a material allowing the reversible insertion of lithium ions is an undeniable commercial success. Carbon electrodes, generally called Li{sub x}C{sub 6}, are the most common type and allow to increase the service life of the battery, its charging fastness and its safety. The safety of such batteries is well known in normal conditions of use, but it has to be known also in any abusive condition of use, whatever is the charging state. The mastery of the phenomena that can occur requires a good knowledge of the kinetics of the exothermal chemical reactions involved. (J.S.) 8 refs.

  3. A Theory of Radioisotope Scanning Systems; Une Theorie des Systemes de Scintigraphoe au Moyen des Radioisotopes; Teoriya sistem radioizotopnogo skennirovaniya; Teoria de los Sistemas de Exploracion Radioisotopica

    Energy Technology Data Exchange (ETDEWEB)

    Beck, R. N. [Argonne Cancer Research Hospital, University of Chicago, Chicago, IL (United States)

    1964-10-15

    realized that the advantages of resolving power as a criterion of quality are largely illusory''. Borrowing from that field, the concept of ''sine wave response'' is introduced to define resolution of collimated scintillation detectors for d istributed sources. (author) [French] Le principal objet d'une theorie generale des systemes de scintigraphie est de predire et d'evaluer les performances de systemes hypothetiques concus a des fins bien determinees, par exemple pour la detectiondes tumeurs cerebrales. Une telle theorie devrait donner des responses quantitatives a des questions telles que la suivante: 'Pour la detection de tumeurs cerebrales d'une certaine dimension, profondeur, etc., faut-il utiliser un scintigraphe concu pour u'I ou pour {sup 203}Hg?' L'auteur cherche a coordonner les divers elements d'une telle theorie et a etablir des equations exprimant les rapports entre les parametres biologiques et physiques a considerer: dimension et profondeur de la tumeur, taux de fixation, sensibilite du collimateur, pouvoir de resolution, distance focale, surface du scintigramme, temps d'exploration, fiabilite, etc. L'element essentiel de cette theorie est un critere ou indice de qualite pouvant etre calcule pour n'importe quel systeme et utilise pour la comparaison de divers systemes. L'auteur discute des indices de qualite fondes sur la perception visuelle et la theorie de l'information et adopte un indice fonde sur la statistique. Cet indice est une fonction de la sensibilite et de la resolution du detecteur; l'une et l'autre sont etudiees de maniere detaillee. L'auteur analyse la reponse du collimateur pour des sources de radioactivite ponctuelles et pour des sources distribuees dans un plan ou dans l'espace. La reponse totale [E{sub t} = E(l+P+S)] d'un detecteur.collimate, dirige sur une source de grande surface, est la somme de trois composantes dues aux rayons gamma qui penetrent dans le collimateur: a)'geometriquement'ou de facon normale (E); b) a travers les

  4. Frequency Assignment, Sharing and Conservation in Systems (Aerospace). (l’Attribution, le partage et la conservation des frequences pour les systemes aeronautiques et spatiales)

    Science.gov (United States)

    1999-01-01

    NETWORKS C. Bousofto-Calzön A.R. Figueiras-Vidal Dpto. Tecnologias de las Comunicaciones Univ. Carlos III de Madrid C/Butarque, 15; 28911 Leganes...Attribution, le partage et la conservation des frequences pour les systemes aeronautiques et spatiales) Papers presented at the Information Systems...PROCEEDINGS 13 Frequency Assignment, Sharing and Conservation in Systems (Aerospace) (V Attribution, le partage et la conservation des frequences pour

  5. Dolomitization of carbonated reservoirs of platforms. From geologic data to modeling. Example of the great Bahama bank; La dolomitisation des reservoirs carbonates de plate-forme. Des donnees geologiques a la modelisation. Exemple du Grand Banc des Bahamas

    Energy Technology Data Exchange (ETDEWEB)

    Caspard, E.

    2002-09-01

    Dolomitization has long been one of the most studied geological processes because of its economic interest (dolomitic rocks form a significant share of hydrocarbon reservoirs) as well as its academic interest, based on the fact that dolomite scarcely forms in current and recent marine environments whereas seawater is highly over-saturated; and that it is still not possible to synthesize it in laboratory under the same conditions. We used data collected by the University of Miami (Bahamas Drilling Project, ODP Leg 166) to understand the geological context of complete dolomitization of a Messinian 60 m thick reef unit. Classical methods of petrographic analysis of thin sections (optical microscopy, cathodoluminescence, scanning electron microscopy, in situ isotopic analyze using ionic microprobe) showed that the intensity of dolomitization is not controlled by the initial texture of the sediment, that the key parameter for dolomitization is the conservation of the initial mineralogy of magnesian bio-clasts, and that redox conditions, salinity and/or temperature of the precipitation fluid varied significantly during the process. Hydrodynamic modelling showed that during periods of high sea-level, Kohout thermal convection is a viable mechanism for driving marine fluids through the sediments. The key parameter for fluid circulations is the permeability anisotropy on the platform scale. Geochemical modelling showed that seawater is able to induce a complete dolomitization over durations of around one million years. Sensitivity tests showed that the critical parameter (as well as one of the less well-known) to describe diagenetic processes in carbonates is the water/rock reactions kinetics and in particular the precipitation kinetics of carbonate minerals. We finally propose that the dolomitization of the reef unit of the Unda well took place during the high sea-level period which extended over 1,1 My in the early Pliocene, according to the Kohout thermal convection

  6. The Effect of Kinetic Energy on the Reactions of Nucleogenic Carbon Atoms with Hydrocarbons; Effet de l'Energie Cinetique sur les Reactions des Atomes de Carbone Nucleogeniques avec des Hydrocarbures; Ehffekt kineticheskoj ehnergii pri reaktsiyakh atomov yadernogenichesko- go ugleroda s uglevodorodami; Efecto de la Energia Cinetica en las Reacciones de Atomos Nucleogenos de Carbono con Hidrocarburos

    Energy Technology Data Exchange (ETDEWEB)

    Dubrin, J.; Rosenberg, H.; Wolfgang, R. [Sterling Chemistry Laboratory, Yale University, New Haven, CT (United States); MacKay, C. [Haverford College, Haverford, PA (United States)

    1965-04-15

    }, CH{sub 3}CH{sub 2}D, CD{sub 9}CDH{sub 2} and from various mixtures of other labelled alkanes and alkenes indicates that the removal of kinetic energy from, the C atom has little effect on the relative rate of attack at various types of C-H bonds. (author) [French] Le procede fondamental permettant d'etudier l'effet de l'energie cinetique sur les reactions des atomes de carbone produits par transformation nucleaire se fonde sur la methode bien connue du ralentissement 5 l'aide de gaz inertes. Toutefois, il peut etre combine I d'autres procedes: 1. emploi d'agents de balayage pour deceler les processus dans lesquels interviennent des radicaux de longue periode; 2, etudes de degradation qui servent a determiner la position occupee par l'atome actif; 3, etudes a l'aide d'un double indicateur, dans lesquelles un coips en reaction est partiellement marque par le deuterium et la composition isotopique des produits marques est determinee en vue d'etablir l'origine de l'hydrogene que ces produits contiennent. Les auteurs presentent des resultats nouveaux sur les rendements dans les deux systemes neon-ethylene et neon-ethane, et discutent la relation entre ces resultats et ceux d'autres travaux fondes sur des etudes de degradation et des experiences a l'aide d'un double indicateur. Pour ce qui est des resultats relatifs au systeme neon-ethylene, la discussion se fonde sur les deux mecanismes d'insertion anterieurement admis, a savoir insertion de l'atome de carbone dans la double liaison C = C et dans la liaison C-H, de maniere a donner des produits d'addition C-C{sub 2}H{sub 4}. Lorsque la concentration en neon augmente, on retrouve tous les produits, mais les rendements relatifs varient sensiblement. Des produits tels que l'acetylene proprement dit et le vinyl-acetylene, qui peuvent se former a partir des produits d'addition initiaux C-C{sub 2}H{sub 4} par des processus exigeant une forte energie, perdent de leur importance, tandis que le rendement en produits formes a basse

  7. Designing Microporus Carbons for Hydrogen Storage Systems

    Energy Technology Data Exchange (ETDEWEB)

    Alan C. Cooper

    2012-05-02

    An efficient, cost-effective hydrogen storage system is a key enabling technology for the widespread introduction of hydrogen fuel cells to the domestic marketplace. Air Products, an industry leader in hydrogen energy products and systems, recognized this need and responded to the DOE 'Grand Challenge' solicitation (DOE Solicitation DE-PS36-03GO93013) under Category 1 as an industry partner and steering committee member with the National Renewable Energy Laboratory (NREL) in their proposal for a center-of-excellence on Carbon-Based Hydrogen Storage Materials. This center was later renamed the Hydrogen Sorption Center of Excellence (HSCoE). Our proposal, entitled 'Designing Microporous Carbons for Hydrogen Storage Systems,' envisioned a highly synergistic 5-year program with NREL and other national laboratory and university partners.

  8. The under-critical reactors physics for the hybrid systems; La physique des reacteurs sous-critiques des systemes hybrides

    Energy Technology Data Exchange (ETDEWEB)

    Schapira, J P [Institut de Physique Nucleaire, IN2P3/CNRS 91 - Orsay (France); Vergnes, J [Electricite de France, EDF, Direction des Etudes et Recherches, 75 - Paris (France); Zaetta, A [CEA/Saclay, Direction des Reacteurs Nucleaires, DRN, 91 - Gif-sur-Yvette (France); and others

    1998-03-12

    This day, organized by the SFEN, took place at Paris the 12 march 1998. Nine papers were presented. They take stock on the hybrid systems and more specifically the under-critical reactors. One of the major current preoccupation of nuclear industry is the problems of the increase of radioactive wastes produced in the plants and the destruction of the present stocks. To solve these problems a solution is the utilisation of hybrid systems: the coupling of a particle acceleration to an under-critical reactor. Historical aspects, advantages and performances of such hybrid reactors are presented in general papers. More technical papers are devoted to the spallation, the MUSE and the TARC experiments. (A.L.B.)

  9. Solar hydrogen hybrid system with carbon storage

    International Nuclear Information System (INIS)

    Zini, G.; Marazzi, R.; Pedrazzi, S.; Tartarini, P.

    2009-01-01

    A complete solar hydrogen hybrid system has been developed to convert, store and use energy from renewable energy sources. The theoretical model has been implemented in a dynamic model-based software environment and applied to real data to simulate its functioning over a one-year period. Results are used to study system design and performance. A photovoltaic sub-system directly drives a residential load and, if a surplus of energy is available, an electrolyzer to produce hydrogen which is stored in a cluster of nitrogen-cooled tanks filled with AX-21 activated carbons. When the power converted from the sun is not sufficient to cover load needs, hydrogen is desorbed from activated carbon tanks and sent to the fuel-cell sub-system so to obtain electrical energy. A set of sub-systems (bus-bar, buck- and boost-converters, inverter, control circuits), handle the electrical power according to a Programmable Logic Control unit so that the load can be driven with adequate Quality of Service. Hydrogen storage is achieved through physisorption (weak van der Waals interactions) between carbon atoms and hydrogen molecules occurring at low temperature (77 K) in carbon porous solids at relatively low pressures. Storage modeling has been developed using a Langmuir-Freundlich 1st type isotherm and experimental data available in literature. Physisorption storage provides safer operations along with good gravimetric (10.8% at 6 MPa) and volumetric (32.5 g/l at 6 MPa) storage capacities at costs that can be comparable to, or smaller than, ordinary storage techniques (compression or liquefaction). Several test runs have been performed on residential user data-sets: the system is capable of providing grid independence and can be designed to yield a surplus production of hydrogen which can be used to recharge electric car batteries or fill tanks for non-stationary uses. (author)

  10. Diseases of the hepatobiliary system as a cause of acute abdomen; Erkrankungen des hepatobiliaeren Systems als Ursache des akuten Abdomens

    Energy Technology Data Exchange (ETDEWEB)

    Schima, W.; Eisenhuber-Stadler, E. [Krankenhaus Goettlicher Heiland, Abteilung fuer Radiologie und bildgebende Diagnostik, Wien (Austria); Koelblinger, C.; Kulinna-Cosentini, C.; Ba-Ssalamah, A. [Medizinische Universitaet Wien, Universitaetsklinik fuer Radiodiagnostik, Wien (Austria)

    2010-03-15

    Diseases of the liver and biliary system are common causes of acute abdominal pain and gallstone disease predisposes to cholecystitis and cholangiolithiasis. Sonography is the method of choice for the assessment of cholecystitis, whereas magnetic resonance cholangiopancreaticography (MRCP) is the standard technique to detect stones in the common bile duct. Multi-detector computed tomography (MDCT) is ideal for detection of associated complications, including abscess formation and gall stone ileus. Pyogenic, amebic and fungal liver abscesses are reliably diagnosed with MDCT which can also be used for interventional radiologic therapy of liver abscesses by percutaneous aspiration or drainage procedures. The second most common cause of liver rupture after blunt trauma is spontaneous rupture of hypervascular liver tumors (i.e., HCC, adenoma, angiosarcoma) and due to medical procedures. Multi-phase contrast-enhanced MDCT can reliably detect active bleeding to guide further therapy in these cases. (orig.) [German] Die Cholezystitis ist eine der haeufigsten Ursachen fuer ein akutes Abdomen. Waehrend die Sonographie die Methode der Wahl zum Nachweis einer Cholezystolithiasis und Cholezystitis ist, steht bei der Entwicklung von Komplikationen die Multidetektorcomputertomographie (MDCT) diagnostisch im Vordergrund. Die Magnetresonanzcholangiopankreatikographie (MRCP) hat einen hohen Stellenwert bei der Abklaerung der Cholangiolithiasis, v. a. bei der Differenzialdiagnose zu anderen Ursachen einer Cholestase. Die Diagnose bakterieller, Amoeben- oder fungaler Leberabszesse kann mittels Sonographie oder MDCT rasch gestellt werden, wobei diese Methoden auch fuer die interventionelle radiologische Therapie von Leberabszessen (Punktion oder Drainage) gut geeignet sind. Die mehrphasige, kontrastmittelverstaerkte MDCT ist die Methode der Wahl fuer den Nachweis von Leberinfarkten oder -rupturen, da bei diesen Erkrankungen bzw. Verletzungsfolgen die Darstellung der

  11. Research of System Building Basing on the Low Carbon Economy About Carbon Accounting for the Enterprise

    Directory of Open Access Journals (Sweden)

    Yao Liqiong

    2016-01-01

    Full Text Available As global warming has become truth, is developing as a new economic model, The new economic development model has given rise to an important branch of environmental accounting, namely carbon accounting. At first, this paper discusses the carbon accounting theoretical foundation comprehensively, and then analyzes the environment of the construction of the carbon accounting system. The focus of the article is to build enterprise carbon accounting system, it covers the confirmation and measurement, record and information disclosure of the enterprise carbon accounting on the way of low carbon economy, its core is the processing of carbon emission rights, information disclosure mode and content, etc.; The purpose of this paper is to build enterprise carbon accounting system which is suitable for China’s national conditions, in order to provide certain reference and theoretical support for the low carbon economy development of our country.

  12. Systems for carbon trading. An overview

    International Nuclear Information System (INIS)

    Hasselknippe, Henrik

    2003-12-01

    This paper focuses on the increasing number of regional, national and international systems for trading and transfer of greenhouse gas emission allowances and emission reduction credits. The paper will serve as a platform for further discussions on the development of the international carbon trading market. The analysis builds on the International Emissions Trading Association (IETA) Trading Schemes Database, which has been developed by Point Carbon, covering all known trading schemes and programs. A full overview of all existing trading schemes and proposals is presented, showing inter alia the outreach and judicial nature of the systems, the range and nature of emission reduction or credit purchase targets, allocation methods used, links to external systems, and possibilities for the use of project-based credits. A comparative assessment is performed on a number of design criteria, allowing for conclusions to be drawn on the level of harmonisation of these systems, and the identification of convergence or divergence of important operational features. The systems covered in the analysis display considerable variation when it comes to key design criteria and functionality. A rapid integration of many of the planned and active systems seems likely following the agreement on the EU emissions trading scheme, and will be further accelerated if the Kyoto Protocol is ratified

  13. Optimisation des proprietes physiques d'un composite carbone epoxy fabrique par le procede RFI

    Science.gov (United States)

    Koanda, Mahamat Mamadou Lamine

    The RFI (Resin Film Infusion) process is a composite materials manufacturing process. Especially known for the small investment it requires, RFI processes are more and more widely used in the aeronautical industry. However a number of aspects of this process are still not well controlled. The quality of the final part depends on which process is used. In the case of RFI, controlling physical characteristics such as thickness, fiber volume fraction or void content remains a major challenge. This dissertation deals with the optimization of the physical properties of a carbon composite manufactured with RFI processes. The ASTMD3171 and ASTMD792 standards were used to measure the void content and fiber volume fraction. First, we introduced different layup sequences in the RFI process and evaluate their impact on the physical properties of the final product. The experiments show the primary mode A, with the resin film at the bottom, resulting in much better quality with controlled fiber volume fraction and void content. Mode B (film in the symmetrical plane) yields results identical to mode A except more irregular thicknesses. Mode C (symmetrical film in the laminate) produces locally unacceptable void contents. Mode D (resin film on the top of the laminate) yields much better results than mode A with the exception of the more irregular thicknesses. Making gaps and overlaps with the resin film has negative effects beyond 2.54cm (one inch) and should be avoided. Several C-scan observations of the manufactured samples showed a large accumulation of porosity in the resin rich areas, as well as surface defects. Ultimately we analyzed the cure cycle in light of the thermodynamic porosity models. It is evident that the diffusion phenomenon is essential in this process. Therefore a better conditioning of the resin film made by Cytec is required. An optimal design with a cycle stop and pressure lag yields the optimal cure cycle for the RFI process.

  14. Review of Fusion Systems and Contributing Technologies for SIHS-TD (Examen des Systemes de Fusion et des Technologies d’Appui pour la DT SIHS)

    Science.gov (United States)

    2007-03-31

    objective evaluation were identified: methods based on statistical characteristics, methods based on definition, methods based on information theory ...des auteurs et des documents connus, puis à suivre les références qu’ils fournissaient à d’autres ouvrages. À la fin de la recherche, environ 150...Information Theory .....................................54 4.3.3.2.4 Objective Evaluation Based on Important Features

  15. Image processing. A system for the automatic sorting of chromosomes; Traitement d'images - Applications au classement des chromosomes

    Energy Technology Data Exchange (ETDEWEB)

    Najai, Amor

    1977-05-27

    The present paper deals with two aspects of the system: - an automata (specialized hardware) dedicated to image processing. Images are digitized, divided into sub-units and computations are carried out on their main parameters. - A software for the automatic recognition and sorting of chromosomes is implemented on a Multi-20 minicomputer, connected to the automata. (author) [French] Nous decrivons un systeme automatique de classification de chromosomes. Il se compose de: - l'A.S.T.I., Automate Specialise de Traitement d'Images permettant de numeriser celles-ci, d'isoler des sous-images, d'effectuer des calculs sur leurs parametres principaux. - Un programme de reconnaissance et de classification automatique des chromosomes implante sur un mini-ordinateur MULTI-20, couple a l'A.S.T.I. (auteur)

  16. Oxidation of iron and steels by carbon dioxide under pressure (1962); Oxydation du fer et des aciers par l'anhydride carbonique sous pression (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Colombie, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    After having developed one of the first thermo-balances to operate under pressure, we have studied the influence of the pressure on the corrosion of iron and steels by carbon dioxide. The corrosion was followed by three different methods simultaneously: by the oxidation kinetics, by micrographs, and by radiocrystallography. We have been able to show that the influence of the pressure is not negligible and we have provided much experimental evidence: oxidation kinetics, micrographic aspects, surface precipitation of carbon, metal carburization, the texture of the magnetite layer. All these phenomena are certainly modified by changes in the carbon dioxide pressure. In order to interpret most of our results we have been led to believe that the phenomenon of corrosion by CO{sub 2} depends on secondary reactions localised at the oxide-gas interface. This would constitute a major difference between the oxidation by CO{sub 2} and that by oxygen. (author) [French] Apres avoir etudie et mis au point une des premieres thermobalances fonctionnant sous pression, nous avons etudie l'influence de la pression sur la corrosion du fer et des aciers par l'anhydride carbonique. Notre etude a ete conduite simultanement sur trois plans differents: etude des cinetiques d'oxydation, etude micrographique et etude radiocristallographique. Nous avons pu montrer que l'influence de la pression n'etait pas negligeable et nous en avons fourni un faisceau de preuves experimentales important: cinetiques d'oxydation, aspect micrographique, precipitation superficielle de carbone, carburation du metal, texture de la couche de magnetite. Tous ces phenomenes sont sans aucun doute modifies par une variation de pression du gaz carbonique. Pour interpreter la plupart de nos resultats, nous avons ete conduits a penser que le phenomene de corrosion par CO{sub 2} etait tributaire de reactions secondaires localisees a l'interface oxyde-gaz. Ce serait la une des differences fondamentales entre l'oxydation par

  17. Behavior of americium in aqueous carbonate systems

    Energy Technology Data Exchange (ETDEWEB)

    Silva, R.J.

    1983-11-01

    The solubilities of crystalline Am(OH)/sub 3/ and AmOHCO/sub 3/ were measured at 25/sup 0/C in aqueous solutions of 0.1 M NaClO/sub 4/ by determination of the solution concentrations of Am. Prior to use in the measurements, the solid materials were characterized by their x-ray powder diffraction patterns. The solubility product quotients were calculated from the experimental data. The hydrolysis quotients of Am/sup 3 +/ were also estimated from the hydroxide solubility data. Using the thermodynamic data derived from these experiments and the recently reported formation constants for the Am/sup 3 +/ carbonate complexes, the solid phases and concentrations of solution species of americium in several aqueous carbonate systems were calculated using the computer code MINEQL. 20 references, 1 figure, 1 table.

  18. Thermal solar systems in domestic buildings. Evaluation of the Hessen state funding programme for thermal solar systems; Thermische Solaranlagen in Wohngebaeuden. Auswertung des Solarthermischen Foerderprogrammes des Landes Hessen fuer die Jahre 1992 - 1996

    Energy Technology Data Exchange (ETDEWEB)

    Lackschewitz, U.

    1998-11-01

    The report presents statistical information on all solar systems that received state funds. Problems concerning the installation of solar systems are gone into. The report focuses on service water heating systems both for single-family buildings and multiple dwellings. Further, four enquiries were carried out among operators and producers of thermal solar systems, and 29 state-funded solar systems were visited and investigated in situ. Based on the analysis of the funding programme so far, further measures are suggested. [German] Nach einer fuenfjaehrigen Laufzeit des Solarthermischen Foerderprogramms fuer Wohngebaeude beauftragte das Hessische Ministerium fuer Umwelt, Energie, Jugend, Familie und Gesundheit die Gesellschaft fuer umweltfreundliche Technologie e.V. in Kassel mit einer Auswertung des Foerderprogrammes fuer die Jahre 1992 bis 1996. Die Auswertung gibtzunaechst einen Ueberblick ueber alle gefoerderten Solaranlagen. Darueber hinaus wurden wichtige Fragestellungen, die bei der Installation thermischer Solaranlagen in Wohngebaeuden auftreten, anhand einer groesseren Zahl gefoerderter Solaranlagen untersucht. Schwerpunkte dieser Untersuchung bilden Solaranlagen zur Brauchwassererwaermung zum einen in Einfamilienhaeusern und zum anderen in groesseren Mehrfamilienhaeusern. Neben der Auswertung der Foerderantraege wurden dazu vier Umfragen bei Betreibern und Anbietern thermischer Solaranlagen durchgefuehrt und 29 gefoerderte Solaranlagen besichtigt. Aufbauend auf der Analyse des bisherigen Foerderprogrammes werden Vorschlaege fuer weitere Massnahmen des Landes zur Foerderung thermischer Solaranlagen unterbreitet. (orig.)

  19. Monitoring soil carbon will prepare growers for a carbon trading system

    Directory of Open Access Journals (Sweden)

    Emma C. Suddick

    2013-07-01

    Full Text Available California growers could reap financial benefits from the low-carbon economy and cap-and-trade system envisioned by the state's AB 32 law, which seeks to lower greenhouse gas emissions statewide. Growers could gain carbon credits by reducing greenhouse gas emissions and sequestering carbon through reduced tillage and increased biomass residue incorporation. First, however, baseline stocks of soil carbon need to be assessed for various cropping systems and management practices. We designed and set up a pilot soil carbon and land-use monitoring network at several perennial cropping systems in Northern California. We compared soil carbon content in two vineyards and two orchards (walnut and almond, looking at conventional and conservation management practices, as well as in native grassland and oak woodland. We then calculated baseline estimates of the total carbon in almond, wine grape and walnut acreages statewide. The organic walnut orchard had the highest total soil carbon, and no-till vineyards had 27% more carbon in the surface soil than tilled vineyards. We estimated wine grape vineyards are storing significantly more soil carbon per acre than almond and walnut orchards. The data can be used to provide accurate information about soil carbon stocks in perennial cropping systems for a future carbon trading system.

  20. The Rapid Disaster Evaluation System (RaDES): A Plan to Improve Global Disaster Response by Privatizing the Assessment Component.

    Science.gov (United States)

    Iserson, Kenneth V

    2017-09-01

    Emergency medicine personnel frequently respond to major disasters. They expect to have an effective and efficient management system to elegantly allocate available resources. Despite claims to the contrary, experience demonstrates this rarely occurs. This article describes privatizing disaster assessment using a single-purposed, accountable, and well-trained organization. The goal is to achieve elegant disaster assessment, rather than repeatedly exhorting existing groups to do it. The Rapid Disaster Evaluation System (RaDES) would quickly and efficiently assess a postdisaster population's needs. It would use an accountable nongovernmental agency's teams with maximal training, mobility, and flexibility. Designed to augment the Inter-Agency Standing Committee's 2015 Emergency Response Preparedness Plan, RaDES would provide the initial information needed to avoid haphazard and overlapping disaster responses. Rapidly deployed teams would gather information from multiple sources and continually communicate those findings to their base, which would then disseminate them to disaster coordinators in a concise, coherent, and transparent way. The RaDES concept represents an elegant, minimally bureaucratic, and effective rapid response to major disasters. However, its implementation faces logistical, funding, and political obstacles. Developing and maintaining RaDES would require significant funding and political commitment to coordinate the numerous agencies that claim to be performing the same tasks. Although simulations can demonstrate efficacy and deficiencies, only field tests will demonstrate RaDES' power to improve interagency coordination and decrease the cost of major disaster response. At the least, the RaDES concept should serve as a model for discussing how to practicably improve our current chaotic disaster responses. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Discrete event dynamic system (DES)-based modeling for dynamic material flow in the pyroprocess

    International Nuclear Information System (INIS)

    Lee, Hyo Jik; Kim, Kiho; Kim, Ho Dong; Lee, Han Soo

    2011-01-01

    A modeling and simulation methodology was proposed in order to implement the dynamic material flow of the pyroprocess. Since the static mass balance provides the limited information on the material flow, it is hard to predict dynamic behavior according to event. Therefore, a discrete event system (DES)-based model named, PyroFlow, was developed at the Korea Atomic Energy Research Institute (KAERI). PyroFlow is able to calculate dynamic mass balance and also show various dynamic operational results in real time. By using PyroFlow, it is easy to rapidly predict unforeseeable results, such as throughput in unit process, accumulated product in buffer and operation status. As preliminary simulations, bottleneck analyses in the pyroprocess were carried out and consequently it was presented that operation strategy had influence on the productivity of the pyroprocess.

  2. The ternary system nickel-nobium-carbon

    International Nuclear Information System (INIS)

    Stadelmaier, H.H.; Fiedler, M.L.

    1975-01-01

    The ternary system nickel-niobium-carbon was studied by metallographic and X-ray diffraction methods to produce a liquidus projection and an isothermal section at 1,100 0 C. The liquidus projection is dominated by a wide field of primary NbC that extends far into the nickel corner of the composition triangle. Only one ternary compound is observed in this system, an eta-carbide formed in a peritectoid reaction. It has a narrow homogeneity range at Ni 2 Nb 4 C, and its lattice constant in alloys quenched from 1,100 0 C varies between 11.659 and 11.667 A. No eta-carbide Ni 3 Nb 3 C or Ni 6 Nb 6 could be detected. (orig.) [de

  3. Carbon footprint reductions via grid energy storage systems

    Energy Technology Data Exchange (ETDEWEB)

    Hale, Trevor S. [Naval Facilities Engineering Service Center, 1100 23rd Avenue, Port Huenem, CA 93043 (United States); Department of Management, Marketing, and Business Administration, University of Houston - Downtown, Houston, Texas (United States); Weeks, Kelly [Department of Maritime Administration, Texas A and M University at Galveston, Galveston, TX 77553 (United States); Tucker, Coleman [Department of Management, Marketing, and Business Administration, University of Houston - Downtown, Houston, Texas 77002 (United States)

    2011-07-01

    This effort presents a framework for reducing carbon emissions through the use of large-scale grid-energy-storage (GES) systems. The specific questions under investigation herein are as follows: Is it economically sound to invest in a GES system and is the system at least carbon footprint neutral? This research will show the answer to both questions is in the affirmative. Scilicet, when utilized judiciously, grid energy storage systems can be both net present value positive as well as be total carbon footprint negative. The significant contribution herein is a necessary and sufficient condition for achieving carbon footprint reductions via grid energy storage systems.

  4. caracterisation des systemes d'elevage cunicole dans le district d ...

    African Journals Online (AJOL)

    élevage du lapin. (Oryctolagus cuniculus) ... au bord du golfe de Guinée et est compris entre les Latitudes 5°00 et .... Tableau 1 : Effectif des reproductrices en fonction du type de logement et de la zone d'élevage des lapins. Distribution of rabbit ...

  5. The Structural Reforms of the Chinese Statistical System Die Strukturreformen des chinesischen Statistiksystems

    Directory of Open Access Journals (Sweden)

    Günter Moser

    2009-04-01

    Full Text Available The quality of statistical data covering the economic and social development of the People’s Republic of China has been questioned by international and national data users for years. The reasons for this doubt lie mainly in the structure of the Chinese system of statistics. Two parallel systems exist which operate largely autonomously: the national system of statistics and the sectoral system of statistics. In the area of the national statistical system, the National Bureau of Statistics (NBS has the authority to order and collect statistics. This competence lies with the ministries and authorities below the ministerial level. This article describes and analyses these structures, the resulting problems, and the reform measures taken to date. It also aims to provide a better understanding of the statistical data about the People’s Republic of China and to enable an assessment of them within a changing structural context. In conclusion, approaches to further reforms will be provided based on the author’s long-standing experience in cooperation projects with the official Chinese statistics agencies. Die Qualität der Statistiken zur ökonomischen und sozialen Entwicklung in der Volksrepublik China ist in letzter Zeit sowohl von ausländischen wie auch von einheimischen Nutzern der Daten in Frage gestellt worden. Die Gründe dafür liegen vor allem in der Struktur des Erhebungssystems in China.

  6. Autoassemblage de macromolécules biologiques via des poly(pyrroles) et/ou des nanotubes de carbone fonctionnalisés

    OpenAIRE

    Baur , Jessica

    2010-01-01

    This work is dedicated to the development of hybrid assemblies based on polymers and biomolecules with or without carbon nanotubes with the aim to show their applications in different areas such as biosensors or bio-fuel cells. Firstly, poly(pyrrole-NTA)/Cu2+ was used for the elaboration of DNA or enzymatic biosensors. So, it was able to be used with its affinity partner, histidine, for the reversible immobilization of oligonucleotide probes tagged with histidines. Thanks to a detection witho...

  7. [Carbon monoxide poisoning by a heating system].

    Science.gov (United States)

    Dietz, Eric; Gehl, Axel; Friedrich, Peter; Kappus, Stefan; Petter, Franz; Maurer, Klaus; Püschel, Klaus

    2016-01-01

    A case of accidental carbon monoxide poisoning in several occupants of two neighboring residential buildings in Hamburg-Harburg (Germany) caused by a defective gas central heating system is described. Because of leaks in one of the residential buildings and the directly adjacent wall of the neighboring house, the gas could spread and accumulated in both residential buildings, which resulted in a highly dangerous situation. Exposure to the toxic gas caused mild to severe intoxication in 15 persons. Three victims died still at the site of the accident. Measures to protect the occupants were taken only with a great delay. As symptoms were unspecific, it was not realized that the various alarms given by persons involved in the accident were related to the same cause. In order to take appropriate measures in time it is indispensible to recognize, assess and check potential risks, which can be done by using carbon monoxide warning devices and performing immediate COHb measurements with special pulse oximeters on site. Moreover, the COHb content in the blood should be routinely determined in all patients admitted to an emergency department with unspecific symptoms.

  8. Total cross-section measurements on aluminium, carbon, fluorine and hydrogen for d, d reaction neutrons using the coincidence method (1963); Mesure de la section efficace totale de l'aluminium, du carbone, du fluor et de l'hydrogene pour des neutrons de la reaction d, d par la methode des coincidences (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Ambrosino, G; Sorriaux, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The experiment described consists in the measurement of the total cross-section of various materials: aluminium, carbon, fluorine and hydrogen, for mono-energetic 2.77 MeV neutrons obtained from the d,d reaction. The measurement is carried out by transmission. The neutrons are detected by means of a plastic scintillator mounted on a 56 AVP photomultiplier, and are isolated from all secondary phenomena (background noise, scattered neutrons) by coincidence with helium 3. which particles are associated to the neutrons from the reaction {sup 2}{sub 1}D ({sup 2}{sub 1}D, n) {sup 3}{sub 2}H The helium 3 particles are detected by a PN junction diode used with inverted polarisation. An absorption exponential has been traced out using measurements made on seven aluminium bars. The accuracy of the total cross-section measurements is about 10{sup -2}. (authors) [French] L'experience exposee dans ce rapport consiste en la mesure des sections efficaces totales de differents materiaux: aluminium, carbone, fluor et hydrogene, pour des neutrons monoenergetiques de 2,77 MeV, obtenus par la reaction d,d. La mesure est faite par transmission. Les neutrons sont detectes par un scintillateur plastique monte sur un photomultiplicateur 56 AVP, et sont separes de tout phenomene secondaire (bruit de fond, neutrons diffuses) par coincidence avec les helium 3, particules associees aux neutrons de la reaction {sup 2}{sub 1}D ({sup 2}{sub 1}D, n) {sup 3}{sub 2}H Les helium 3 sont detectes par une diode a jonction PN utilisee en polarisation inverse. Une exponentielle d'absorption a ete tracee a partir de mesures faites sur sept barreaux d'aluminium. La precision des mesures des sections efficaces totales est de l'ordre de 10{sup -2}. (auteurs)

  9. Applications des techniques de diffusion de la lumière, des rayons X et des neutrons a l'étude des systèmes colloïdaux. Troisième partie : caractérisation des microémulsions et des composés solides. Étude de différents systèmes d'intérêt industriel Application of Light, X-Ray and Neutron Diffusion Techniques to the Study of Colloidal Systems. Part Three: Microemulsions, Solid Materials, Liquids and Miscellaneous Systems with Industrial Uses

    Directory of Open Access Journals (Sweden)

    Espinat D.

    2006-11-01

    Full Text Available Cette troisième partie clôt une revue bibliographique concernant la caractérisation des systèmes colloïdaux par les techniques de diffusion (lumière, rayons X, neutrons (Rev. Inst. Franç. du Pétrole, Vol. 45, No 6, novembre-décembre 1990. Nous poursuivrons cette présentation en nous intéressant aux microémulsions. Après la présentation des informations que l'on peut obtenir sur les systèmes polymériques, les solutions micellaires ou les systèmes fractals, qui ont fait l'objet de multiples travaux, nous reviendrons sur les applications plus restreintes à des systèmes colloïdaux parfois moins bien définis et d'origine industrielle, telles les fractions lourdes des pétroles, les asphaltènes ou encore les additifs de lubrification. Les possibilités de la diffusion des rayons X et des neutrons à l'étude de matériaux solides seront présentées à travers la caractérisation des solides poreux et en particulier des catalyseurs. Nous terminerons cette présentation par les liquides purs ou les mélanges; les techniques de diffusion ont contribué fortement à la description des structures des phases liquides. This article is the second one (the first one was published in Revue de l'Institut Français du Pétrole No. 6, November-December 1990 concerning the application of techniques of light scattering, X rays and neutrons to the analysis of colloidal systems and more specifically to the theoretical description of the three methods. The aim of this second part is to make a nonexhaustive description of several fields of applications. A special effort is made to describe the potential of these methods for characterizing colloidal or divided systems encountered in a great many activities involving the petroleum industry. The first part of this article takes up polymer and colloidal solutions. Particular attention is paid to the importance of scattering techniques for characterizing polymers in solution and micellar solutions. A

  10. Testing on air cleaning systems: Testing of the components in-place tests; Controle des installations d'epuration de l'air essais de conformite des elements: Tests in situ

    Energy Technology Data Exchange (ETDEWEB)

    Billard, F; Brion, J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-01

    The reliability of air cleaning systems is dependent on testing they are submitted to. Although in-place tests are the most important as they act as final tests upon achieved plants, component tests are necessary too. They allow detection of defective units before they are installed, partition of unit defects from mounting defects and they are more sensitive. For similar reasons, material teats are most useful. The various tests are described, about aerosol filters for one part, iodine trap for the other. The checked features are: materials nature, units sizes, efficiency, air resistance, flammability, humidity resistance, temperature resistance, adsorbent friability, etc... On iodine trapping systems, small check traps, working by-pass with the main trap are periodically subjected to efficiency test. This control allow to cut down the in-place tests frequency, particularly when poisoning from organic vapours is to be feared. (authors) [French] La surete de fonctionnement des installations d'epuratition de l'air esf fonction des controles auxquels ces installations sont soumises. Si les tests in situ sont les plus importants puisqu'ils constituent le controle final de l'installation terminee, les essais de conformite des elements constitutifs sont egalement necessaires. Ils permettent l'elimination d'elements defectueux avant leur mise en place, la discrimination des defauts du montage de ceux de l'element et sont en outre plus sensibles. De meme, le controle des materiaux constitutifs de l'element s'avere fort utile. On decrit les differents controles, d'une part, pour les fittres a aerosols, d'autre part, pour les pieges a iode. Les caracteristiques verifiees sont: nature des materiaux, dimenesions des elements, efficacite, perte de charge, resistance mecanique, inflammabilite, tenue a l'humidite, tenue a la temperature, resistance au detassement des pieges a iode, friabilite du materiau adsorbant, etc... En ce qui concerne les installations de piegeage d

  11. Reducing Students' Carbon Footprints Using Personal Carbon Footprint Management System Based on Environmental Behavioural Theory and Persuasive Technology

    Science.gov (United States)

    Lin, Shyh-ming

    2016-01-01

    This study applied environmental behavioural theories to develop a personal carbon footprint management system and used persuasive technology to implement it. The system serves as an educational system to improve the determinants of students' low-carbon behaviours, to promote low-carbon concepts and to facilitate their carbon management. To assess…

  12. DES-TOMATO: A Knowledge Exploration System Focused On Tomato Species

    KAUST Repository

    Salhi, Adil; Negrã o, Só nia; Essack, Magbubah; Morton, Mitchell J. L.; Bougouffa, Salim; Mohamad Razali, Rozaimi; Radovanovic, Aleksandar; Marchand, Benoit; Kulmanov, Maxat; Hoehndorf, Robert; Tester, Mark A.; Bajic, Vladimir B.

    2017-01-01

    Tomato is the most economically important horticultural crop used as a model to study plant biology and particularly fruit development. Knowledge obtained from tomato research initiated improvements in tomato and, being transferrable to other such economically important crops, has led to a surge of tomato-related research and published literature. We developed DES-TOMATO knowledgebase (KB) for exploration of information related to tomato. Information exploration is enabled through terms from 26 dictionaries and combination of these terms. To illustrate the utility of DES-TOMATO, we provide several examples how one can efficiently use this KB to retrieve known or potentially novel information. DES-TOMATO is free for academic and nonprofit users and can be accessed at http://cbrc.kaust.edu.sa/des_tomato/, using any of the mainstream web browsers, including Firefox, Safari and Chrome.

  13. DES-TOMATO: A Knowledge Exploration System Focused On Tomato Species

    KAUST Repository

    Salhi, Adil

    2017-07-14

    Tomato is the most economically important horticultural crop used as a model to study plant biology and particularly fruit development. Knowledge obtained from tomato research initiated improvements in tomato and, being transferrable to other such economically important crops, has led to a surge of tomato-related research and published literature. We developed DES-TOMATO knowledgebase (KB) for exploration of information related to tomato. Information exploration is enabled through terms from 26 dictionaries and combination of these terms. To illustrate the utility of DES-TOMATO, we provide several examples how one can efficiently use this KB to retrieve known or potentially novel information. DES-TOMATO is free for academic and nonprofit users and can be accessed at http://cbrc.kaust.edu.sa/des_tomato/, using any of the mainstream web browsers, including Firefox, Safari and Chrome.

  14. The DES Bright Arcs Survey: Hundreds of Candidate Strongly Lensed Galaxy Systems from the Dark Energy Survey Science Verification and Year 1 Observations

    Energy Technology Data Exchange (ETDEWEB)

    Diehl, H. T.; Buckley-Geer, E. J.; Lindgren, K. A.; Nord, B.; Gaitsch, H.; Gaitsch, S.; Lin, H.; Allam, S.; Collett, T. E.; Furlanetto, C.; Gill, M. S. S.; More, A.; Nightingale, J.; Odden, C.; Pellico, A.; Tucker, D. L.; Costa, L. N. da; Neto, A. Fausti; Kuropatkin, N.; Soares-Santos, M.; Welch, B.; Zhang, Y.; Frieman, J. A.; Abdalla, F. B.; Annis, J.; Benoit-Lévy, A.; Bertin, E.; Brooks, D.; Burke, D. L.; Rosell, A. Carnero; Kind, M. Carrasco; Carretero, J.; Cunha, C. E.; D’Andrea, C. B.; Desai, S.; Dietrich, J. P.; Drlica-Wagner, A.; Evrard, A. E.; Finley, D. A.; Flaugher, B.; García-Bellido, J.; Gerdes, D. W.; Goldstein, D. A.; Gruen, D.; Gruendl, R. A.; Gschwend, J.; Gutierrez, G.; James, D. J.; Kuehn, K.; Kuhlmann, S.; Lahav, O.; Li, T. S.; Lima, M.; Maia, M. A. G.; Marshall, J. L.; Menanteau, F.; Miquel, R.; Nichol, R. C.; Nugent, P.; Ogando, R. L. C.; Plazas, A. A.; Reil, K.; Romer, A. K.; Sako, M.; Sanchez, E.; Santiago, B.; Scarpine, V.; Schindler, R.; Schubnell, M.; Sevilla-Noarbe, I.; Sheldon, E.; Smith, M.; Sobreira, F.; Suchyta, E.; Swanson, M. E. C.; Tarle, G.; Thomas, D.; Walker, A. R.

    2017-09-01

    We report the results of our searches for strong gravitational lens systems in the Dark Energy Survey (DES) Science Verication and Year 1 observations. The Science Verication data spans approximately 250 sq. deg. with median i

  15. Compatibility problems of canning materials with carbon dioxide at high temperatures; Problemes de comptabilite des materiaux de gainage avec le gaz carbonique aux temperatures elevees

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R; Loriers, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The adoption in France of carbon dioxide under pressure as a heat carrying fluid in advanced reactors of the gas-graphite and gas heavy water types has led to the necessity of finding a canning material capable of replacing magnesium alloys. Actually these latter can no longer be used above about 500 C, because of the proximity to their melting points and of their mechanical properties which become under these conditions insufficient, although their oxidation resistance in the presence of carbon dioxide is still acceptable. Beryllium which is particularly attractive because of its low neutron capture cross-section, has a very big disadvantage, amongst others: its use in the presence of carbon dioxide et 600 C is only possible if the gas is perfectly dry, the water-vapour partial pressure being the determining factor calling for a degree of drying which increases with increasing absolute pressure. In the opposite case after a short incubation period, the oxidation accelerates and leads to an intergranular corrosion which is rapidly destructive. Nevertheless, beryllium-calcium or beryllium-magnesium alloys containing 0,5 p 100 of the addition element make it possible to overcome this difficulty; they may be used in the presence of a few hundred vpm of water vapour up to at least 700 C. The metallurgical problems convected with the applicability of beryllium or its alloys have led however to the consideration of possibly using provisionally austenitic stainless steels These materials are intrinsically very resistant to oxidation, but, as only small thicknesses can be used because of their high capture cross-section, it is necessary to choose the grades which are least prone to oxidation. Above 300 C, the niobium stabilised grades, without addition of molybdenum are the most acceptable. Above 700 C, the 20 Cr - 25 Ni + Nb grade appears more suitable than the conventional 18 Cr - 10 Ni + Nb grade, especially as it is less liable to local oxide penetrations. Beryllium

  16. CARBON MONOXIDE AND THE NERVOUS SYSTEM

    Science.gov (United States)

    Carbon monoxide (CO) is a colorless, tasteless, odorless, and non-irritating gas formed when carbon in fuel is not burned completely. It enters the bloodstream through the lungs and attaches to hemoglobin (Hb), the body's oxygen carrier, forming carboxyhemoglobin (COHb) and there...

  17. CARBON MONOOXIDE AND THE NERVOUS SYSTEM

    Science.gov (United States)

    Carbon monoxide (CO) is a colorless, tasteless, odorless, and non-irriating gas formed when carbon fuel is not burned completely. It enter the bloodstream through the lungs and attaches to hemoglobin (Hb), the body's oxygen carrier, forming carboxyhemoglobin (COHb) and thereby r...

  18. Validity of the breast imaging reporting and data system BI-RADS{sup TM} for clinical mammography in men; Anwendbarkeit des Breast Imaging Reporting and Data System (BI-RADS{sup TM}) auf die klinische Mammographie des Mannes

    Energy Technology Data Exchange (ETDEWEB)

    Bock, K.; Duda, V.F.; Bonwetsch, C.; Hadji, P.; Schulz, K.D. [Marburg Univ. (Germany). Klinik fuer Gynaekologie, Gynaekologische Endokrinologie und Onkologie; Iwinska-Zelder, J.; Klose, K.J. [Marburg Univ. (Germany). Klinik fuer Diagnostische Radiologie; Rode, G. [Diagnostische Gemeinschaftspraxis Marburg (Germany)

    2001-11-01

    Aim: The implementation of diagnostic standards enhances quality assurance. The American College of Radiology's breast imaging-reporting and data system (BI-RADS{sup TM}) is intended to standardize terminology in the mammography report, the assessment of the findings, and the recommendation af action to be taken. The purpose of this study was to assess the value of the standardized system for clinically apparent male breast tumors. Do the special male anatomy and physiology limit the applicability of an evaluation system designed for female screening mammograms? Methods: 4 investigators with different degrees of experience retrospectively evaluated 160 male mammograms. Our study was based on the 36 cases which could be correlated to histopathological findings: gynecomastia in the majority of cases, but also 4 invasive ductal carcinoma, 1 leiomyosarcoma and 1 ductal carcinoma in situ. Results: Assessment of the mammograms by BI-RADS{sup TM} (3{sup rd} Edition 1998) correctly placed all cases of malignancy into categories 4 and 5 without respect to the investigators's level of experience. Conclusion: Therefore, we conclude that the BI-RADS{sup TM}-classification can successfully be used to classify male mammograms with a high positive predictive value for malignancy. Knowledge of gender-specific imaging characteristics increases the specificity at a constant high level of sensitivity. (orig.) [German] Ziel: In der apparativen Diagnostik dient die Einfuehrung von Standards der Qualitaetssicherung. Das breast imaging-reporting and data system (BI-RADS{sup TM}) des American College of Radiology standardisiert den Sprachgebrauch in der Befundbeschreibung, die Befundbewertung und die resultierenden Empfehlungen in der Mammographie. Unser Interesse galt der Frage, inwieweit dieses System der Kategorisierung von Screening-Mammographien der Frau uebertragbar ist auf klinische Mammographien des Mannes. Begrenzen Anatomie und Physiologie der maennlichen Brustdruese

  19. Hydrothermal Dolomites in the Early Albian (Cretaceous Platform Carbonates (NW Spain: Nature and Origin of Dolomites and Dolomitising Fluids Dolomies hydrothermales présentes dans les carbonates de la plate-forme albienne précoce (Crétacé; NO de l’Espagne : nature et origine des dolomies et des fluides dolomitisants

    Directory of Open Access Journals (Sweden)

    Shah M.M.

    2012-02-01

    hydrodynamic fluid flow along the faults/fractures in the Albian carbonate platform. Subsequently, a second episode of very hot and localised dolomitisation may be related to igneous activity and convective flow. La présente étude décrit les variations temporelle et spatiale des signatures pétrographiques et géochimiques des corps dolomitiques liés aux failles dans les régions de Ranero et El-Moro (vallée de Karrantza, montagnes cantabriques; NO de l’Espagne. Ces corps dolomitiques se trouvent dans les carbonates albiens, déposés dans le bassin Basque-Cantabrique suite à une subsidence intense liée au rift comportant un système de failles associé suivant des orientations diverses. Des circulations de fluides ont généré des dolomies de remplacement et de cimentation, paragénétiquement suivies de divers ciments calcitiques. Des travaux de pétrographie, minéralogie et géochimie (DRX, ICP, XRF, isotopes stables de O/C et du Sr ont aidé à distinguer les étapes hydrothermales. Deux faciès majeurs de dolomies ont été observés selon leur teneur en Fe. Les dolomies précoces sont ferrifères et remplacent le calcaire de façon plus significative que les dolomies non-ferrifères tardives. Les dolomies sont généralement stoechiométriques (de 49,76 à 51,59 % en moles de CaCO3 et présentent une large plage de valeurs de δ18O (de –18,7 à –10,5 ‰ V-PDB, ce qui pourrait indiquer une dolomitisation à phases multiples et/ou des degrés différents de recristallisation. Les valeurs de δ18O décroissantes se trouvent en corrélation avec la diminution de la teneur en Fe dans les dolomies. Dans la région de Ranero, les dolomies présentent des valeurs de δ13C légèrement moins réduites (de –0,15 à  +2,13 ‰ V-PDB que la signature de δ13C du calcaire hôte, tandis que ces valeurs sont nettement plus réduites dans la région de El-Moro (jusqu’à – 2,18 ‰ V-PDB. Les calcites hydrothermales antérieures à la dolomitisation présentent des

  20. Study of uranium (VI) in carbonate solution by potentiometric titrations and ion-exchange; Etude des solutions d'uranium (VI) en milieu carbonate par titrages potentiometriques et echange d'ions

    Energy Technology Data Exchange (ETDEWEB)

    Billon, A [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-04-01

    possible en milieu carbonate 1 M sur de petites quantites, en utilisant la technique de l'elution. Il est suggere une possibilite de separation a une echelle plus importante basee sur le deplacement du molybdene par l'uranium en milieu hydrogenocarbonate 0.5 M (le rapport des coefficients de selectivite est alors tres grand). (auteur)

  1. Solution des systemes de controle de grandes dimensions basee sur les boucles de retroaction dans la simulation des reseaux electriques

    Science.gov (United States)

    Mugombozi, Chuma Francis

    The generation of electrical energy, as well as its transportation and consumption, requires complex control systems for the regulation of power and frequency. These control systems must take into account, among others, new energy sources such as wind energy and new technologies for interconnection by high voltage DC link. These control systems must be able to monitor and achieve such regulation in accordance with the dynamics of the energy source, faults and other events which may induce transients phenomena into the power network. Such transients conditions have to be analyzed using the most accurate and detailed hence, complex models of control system. In addition, in the feasibility study phase, the calibration or the setup of equipment as well as in the operation of the power network, one may require decision aid tools for engineers. This includes, for instance, knowledge of energy dissipated into the arresters in transient analysis. These tools use simulation programs data as inputs and may require that complex functions be solved with numerical methods. These functions are part of control system in computer simulator. Moreover, the simulation evolves in a broader context of the development of digital controller, distributed and parallel high performance computing and rapid evolutions in computer (multiprocessor) technology. In such context, a continuing improvement of the control equations solver is welcomed. Control systems are modelled using ax=b simultaneous system of equations. These equations are sometimes non-linear with feedback loops and thus require iterative Newton methods, including the formation of a Jacobian matrix and ordering as well as processing by graph theory tools. The proposed approach is based on the formulation of a reduced rank Jacobian matrix. The dimension is reduced up to the count of feedback loops. With this new approach, gains in computation speed are expected without compromising its accuracy when compared to classical full

  2. Marché du carbone et solutions de gestion intégrée des déchets ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le Mécanisme de développement propre (MDP) prévu au Protocole de Kyoto signé en 1997 a le double objectif d'aider les pays en développement à connaître un développement durable (tel que défini par chaque pays) et les pays industrialisés, à atteindre leurs cibles (obligatoires) en matière de réduction des gaz à effet ...

  3. Carbon-Carbon Composites as Recuperator Materials for Direct Gas Brayton Systems

    International Nuclear Information System (INIS)

    RA Wolf

    2006-01-01

    Of the numerous energy conversion options available for a space nuclear power plant (SNPP), one that shows promise in attaining reliable operation and high efficiency is the direct gas Brayton (GB) system. In order to increase efficiency, the GB system incorporates a recuperator that accounts for nearly half the weight of the energy conversion system (ECS). Therefore, development of a recuperator that is lighter and provides better performance than current heat exchangers could prove to be advantageous. The feasibility of a carbon-carbon (C/C) composite recuperator core has been assessed and a mass savings of 60% and volume penalty of 20% were projected. The excellent thermal properties, high-temperature capabilities, and low density of carbon-carbon materials make them attractive in the GB system, but development issues such as material compatibility with other structural materials in the system, such as refractory metals and superalloys, permeability, corrosion, joining, and fabrication must be addressed

  4. Carbon-Carbon Composites as Recuperator Material for Direct Gas Brayton Systems

    Energy Technology Data Exchange (ETDEWEB)

    RA Wolf

    2006-07-19

    Of the numerous energy conversion options available for a space nuclear power plant (SNPP), one that shows promise in attaining reliable operation and high efficiency is the direct gas Brayton (GB) system. In order to increase efficiency, the GB system incorporates a recuperator that accounts for nearly half the weight of the energy conversion system (ECS). Therefore, development of a recuperator that is lighter and provides better performance than current heat exchangers could prove to be advantageous. The feasibility of a carbon-carbon (C/C) composite recuperator core has been assessed and a mass savings of 60% and volume penalty of 20% were projected. The excellent thermal properties, high-temperature capabilities, and low density of carbon-carbon materials make them attractive in the GB system, but development issues such as material compatibility with other structural materials in the system, such as refractory metals and superalloys, permeability, corrosion, joining, and fabrication must be addressed.

  5. Modeling carbon emissions from urban traffic system using mobile monitoring.

    Science.gov (United States)

    Sun, Daniel Jian; Zhang, Ying; Xue, Rui; Zhang, Yi

    2017-12-01

    Comprehensive analyses of urban traffic carbon emissions are critical in achieving low-carbon transportation. This paper started from the architecture design of a carbon emission mobile monitoring system using multiple sets of equipment and collected the corresponding data about traffic flow, meteorological conditions, vehicular carbon emissions and driving characteristics on typical roads in Shanghai and Wuxi, Jiangsu province. Based on these data, the emission model MOVES was calibrated and used with various sensitivity and correlation evaluation indices to analyze the traffic carbon emissions at microscopic, mesoscopic and macroscopic levels, respectively. The major factors that influence urban traffic carbon emissions were investigated, so that emission factors of CO, CO 2 and HC were calculated by taking representative passenger cars as a case study. As a result, the urban traffic carbon emissions were assessed quantitatively, and the total amounts of CO, CO 2 and HC emission from passenger cars in Shanghai were estimated as 76.95kt, 8271.91kt, and 2.13kt, respectively. Arterial roads were found as the primary line source, accounting for 50.49% carbon emissions. In additional to the overall major factors identified, the mobile monitoring system and carbon emission quantification method proposed in this study are of rather guiding significance for the further urban low-carbon transportation development. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Current systematic carbon-cycle observations and the need for implementing a policy-relevant carbon observing system

    Science.gov (United States)

    P. Ciais; A. J. Dolman; A. Bombelli; R. Duren; A. Peregon; P. J. Rayner; C. Miller; N. Gobron; G. Kinderman; G. Marland; N. Gruber; F. Chevallier; R. J. Andres; G. Balsamo; L. Bopp; F.-M. Bréon; G. Broquet; R. Dargaville; T. J. Battin; A. Borges; H. Bovensmann; M. Buchwitz; J. Butler; J. G. Canadell; R. B. Cook; R. DeFries; R. Engelen; K. R. Gurney; C. Heinze; M. Heimann; A. Held; M. Henry; B. Law; S. Luyssaert; J. Miller; T. Moriyama; C. Moulin; R. B. Myneni; C. Nussli; M. Obersteiner; D. Ojima; Y. Pan; J.-D. Paris; S. L. Piao; B. Poulter; S. Plummer; S. Quegan; P. Raymond; M. Reichstein; L. Rivier; C. Sabine; D. Schimel; O. Tarasova; R. Valentini; R. Wang; G. van der Werf; D. Wickland; M. Williams; C. Zehner

    2014-01-01

    A globally integrated carbon observation and analysis system is needed to improve the fundamental understanding of the global carbon cycle, to improve our ability to project future changes, and to verify the effectiveness of policies aiming to reduce greenhouse gas emissions and increase carbon sequestration. Building an integrated carbon observation system requires...

  7. Concept for long-time integrity assurance illustrated by a steam generator and the volume control system of the nuclear power plant Neckarwestheim; Gesamtkonzept zur langfristigen Absicherung der Integritaet am Beispiel des Dampferzeugers und des Volumenregelsystems des GKN

    Energy Technology Data Exchange (ETDEWEB)

    Bartonicek, J; Zaiss, W [Gemeinschaftskernkraftwerk Neckar GmbH, Neckarwestheim (Germany); Broecker, B [Preussische Elektrizitaets-AG (Preussenelektra), Hannover (Germany)

    1998-11-01

    Ensuring integrity of safety-relevant components or systems over their serviceable life is a legal requirement. A decisive factor within the established system for integrity assurance is whether there is sufficient information available about inservice degradation mechanisms, and whether this information is taken into account in component or system designing. The design relies on existing specifications or data reflecting the then current knowledge. This is why existing knowledge has to be updated in response to new knowledge obtained from plant operation, and negative effects revealed have to be eliminated by appropriate measures. Damage to components is caused by real loads occurring during operation, or real local conditions in the system, so that inservice monitoring of local conditions and causes leading to damage is a priority task. The information obtained from monitoring can be taken as a basis for modifying the operating mode and documenting the current status of the system. Another redundant measure is monitoring of the consequences of a degradation during operation, this task primarily relying on non-destructive examinations. The efficiency of this measure decisively depends on the available knowledge of possible damaging mechanisms, i.e. monitoring of causes. A comprehensive concept for ensuring long-time integrity will encompass the above quality monitoring and evaluation activities, operation-induced impact and damage monitoring and documentation, and updating of the data representing current knowledge. (orig./CB) [Deutsch] Bei sicherheitstechnisch wichtigen Komponenten bzw. Systemen ist die Integritaet im Betrieb zu gewaehrleisten. Dabei ist entscheidend, ob die betrieblichen Schadensmechanismen ausreichend bekannt sind und bei der Auslegung auch entsprechend beruecksichtigt wurden. Die Auslegung erfolgt aufgrund von Spezifikationen bzw. Annahmen, die den jweiligen Kenntnisstand widerspiegeln. Die Aenderungen des Kenntnisstandes im laufenden Betrieb

  8. Operators of distribution networks in the competitive markets of electricity and gas; Aufgaben des Netzbetreibers im liberalisierten Energiemarkt. IT-System fuer die Umsetzung der Pflichten des Netzbetreibers

    Energy Technology Data Exchange (ETDEWEB)

    Ohmen, S. [Stadtwerke Aachen AG (Germany)

    2001-02-26

    Stawag (Stadtwerke Aachen AG) is the operator of distribution networks for electricity, gas, water and district heating. In charge of this function Stawag is responsible for the complete handling of the third party access in the competitive markets of electricity and gas. In Germany the development of the background conditions for the third party access have been uncertain. In consequence the IT-market offers up to now no software solution comprehensing all the required functions. Stawag therefore decided to realize and work with an interim solution: Individual IT-systems interconnected by a modern Data-Warehouse platform for data exchange. (orig.) [German] Die Stadtwerke Aachen AG (Stawag) ist ein staedtisches Querverbundunternehmen und hat in der Funktion des Netzbetreibers im liberalisierten Energiemarkt die Aufgabe, die Vereilungsnetze fuer Strom und Gas diskriminierungsfrei allen Marktpartnern zur Verfuegung zu stellen. Bei der Einfuehrung der fuer die Abwicklung dieser Aufgabe erforderlichen IT-Systeme ging die Stawag einen Mittelweg zwischen Kauf und Implementierung einer Komplettloesung und weitgehend manueller Abwicklung mit MS-Office-Produkten. Mit Erfolg - wie die Erfahrungen der letzten Monate zeigen - vorerst auf der Stromseite. (orig.)

  9. Effect of Ash on Oxygen Carriers for the Application of Chemical Looping Combustion to a High Carbon Char Effet des cendres sur l’activité des porteurs d’oxygène dans la combustion du charbon en boucle chimique

    Directory of Open Access Journals (Sweden)

    Rubel A.

    2011-02-01

    Full Text Available The application of Chemical Looping Combustion (CLC to solid fuels is being investigated at the University of Kentucky, Center for Applied Energy Research (CAER with the aim of the development of a Pressurized Chemical Looping Combustion/Gasification (PCLC/G process for the generation of electricity from coal. One important aspect of the CLC of solid fuel is the understanding of the effect of ash on the reactivity of Oxygen Carriers (OCs. The effect of ash on the redox capabilities of two different iron oxide OCs and on their ability to oxidize coal char was studied. To determine the effect of ash on the reactivity and recycle of the OCs through multiple redox cycles, fly ash from a coal-fired power plant was used. These experiments were performed in a TGMS system using 500 mg of ash/OC mixtures containing different ash concentrations up to 75%. The reducing gas was composed of 10% H2, 15% CO, 20% CO2, and a balance of Ar and the oxidizing gas was 20% O2 in Ar. Oxidation/reductions were carried to near completion. The ash was found to contain OC activity related to inherent iron present in the ash confirmed by XRD. This resulted in increased weight gain/loss on oxidation/reduction. The rate of oxidation/reduction increased with ash concentration due to increased porosity of the OC/ash mixture and better access of the reactive gases to the OC target sites. The two OCs were then used to combust a beneficiated coal char in the TGMS with the only oxygen supplied by an iron oxide OC. The starting mixture was 10% char and 90% of one of two OCs studied. The spent material containing reduced OC and ash was re-oxidized and 10% more char was added for a second reduction of the OC and oxidation of the added char. This procedure was repeated for 5 cycles increasing the ash concentrations from 5 to 25% in the char/ash/OC mixture. Carbon removal was 92 to 97.8 and 97.3 to 99.7% for the two different iron oxide OCs tested. Ash was not detrimental to the

  10. Nonautonomous linear system of the terrestrial carbon cycle

    Science.gov (United States)

    Luo, Y.

    2012-12-01

    Carbon cycle has been studied by uses of observation through various networks, field and laboratory experiments, and simulation models. Much less has been done on theoretical thinking and analysis to understand fundament properties of carbon cycle and then guide observatory, experimental, and modeling research. This presentation is to explore what would be the theoretical properties of terrestrial carbon cycle and how those properties can be used to make observatory, experimental, and modeling research more effective. Thousands of published data sets from litter decomposition and soil incubation studies almost all indicate that decay processes of litter and soil organic carbon can be well described by first order differential equations with one or more pools. Carbon pool dynamics in plants and soil after disturbances (e.g., wildfire, clear-cut of forests, and plows of soil for cropping) and during natural recovery or ecosystem restoration also exhibit characteristics of first-order linear systems. Thus, numerous lines of empirical evidence indicate that the terrestrial carbon cycle can be adequately described as a nonautonomous linear system. The linearity reflects the nature of the carbon cycle that carbon, once fixed by photosynthesis, is linearly transferred among pools within an ecosystem. The linear carbon transfer, however, is modified by nonlinear functions of external forcing variables. In addition, photosynthetic carbon influx is also nonlinearly influenced by external variables. This nonautonomous linear system can be mathematically expressed by a first-order linear ordinary matrix equation. We have recently used this theoretical property of terrestrial carbon cycle to develop a semi-analytic solution of spinup. The new methods have been applied to five global land models, including NCAR's CLM and CABLE models and can computationally accelerate spinup by two orders of magnitude. We also use this theoretical property to develop an analytic framework to

  11. Modélisation des propriétés diélectriques des nanocomposites ...

    African Journals Online (AJOL)

    Dans ce travail, nous nous intéressons aux propriétés diélectriques dans le domaine des micro-ondes (2.45, 9.50 et 35 GHz) des composites constitués des inclusions de noir de carbone dans une matrice résine époxyde. Nous avons utilisé deux types de carbone : le monarch 700 et le sterling, dont les diamètres des ...

  12. Study of immiscibilities in the trilaurylamine - dodecane - nitric acid - plutonium system; Etude des immiscibilites dans le systeme trilaurylamine - dodecane - acide nitrique - plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Saey, J C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    Phase equilibrium in systems made up of trilaurylamine, dodecane, nitric acid tetravalent plutonium is shown by drawing the triangular diagrams. the study of these diagrams provides informations concerning the causes of immiscibility. Heterogeneity of the organic mixtures can be related to some characteristics of the components- dipole moment, molecular polarizability and hydrogen bond exchanging ability-Depending on these, some rules may be established which can be used to make a proper choice of an additive in order to improve the miscibility. As an application a study on the partial substitution of dodecane with decalin, in plutonium extraction experiments, has been done showing a possible improvement of the extraction process. (author) [French] L equilibre des phases dans les systemes formes a partir de trilaurylamine, de dodecane, d'acide nitrique et de plutonium tetravalent est represente en tracant les diagrammes triangulaires. L'examen de ces diagrammes permet d'apporter certaines precisions en ce qui concerne l'origine des immiscibilites. Celles ci sont ensuite reliees a certaines caracteristiques des constituants: le moment dipolaire, la polarisabilite moleculaire et la tendance a former des liaisons hydrogene. Sur les memes bases, il est possible d'etablir un certain nombre de regles pouvant servir a guider le choix d'un additif ameliorant la miscibilite. En application, une etude sur le remplacement partiel du dodecane par la decaline montre l'interet de l'emploi de ce compose dans le procede de purification du plutonium. (auteur)

  13. The GLOBE Carbon Cycle Project: Using a systems approach to understand carbon and the Earth's climate system

    Science.gov (United States)

    Silverberg, S. K.; Ollinger, S. V.; Martin, M. E.; Gengarelly, L. M.; Schloss, A. L.; Bourgeault, J. L.; Randolph, G.; Albrechtova, J.

    2009-12-01

    National Science Content Standards identify systems as an important unifying concept across the K-12 curriculum. While this standard exists, there is a recognized gap in the ability of students to use a systems thinking approach in their learning. In a similar vein, both popular media as well as some educational curricula move quickly through climate topics to carbon footprint analyses without ever addressing the nature of carbon or the carbon cycle. If students do not gain a concrete understanding of carbon’s role in climate and energy they will not be able to successfully tackle global problems and develop innovative solutions. By participating in the GLOBE Carbon Cycle project, students learn to use a systems thinking approach, while at the same time, gaining a foundation in the carbon cycle and it's relation to climate and energy. Here we present the GLOBE Carbon Cycle project and materials, which incorporate a diverse set of activities geared toward upper middle and high school students with a variety of learning styles. A global carbon cycle adventure story and game let students see the carbon cycle as a complete system, while introducing them to systems thinking concepts including reservoirs, fluxes and equilibrium. Classroom photosynthesis experiments and field measurements of schoolyard vegetation brings the global view to the local level. And the use of computer models at varying levels of complexity (effects on photosynthesis, biomass and carbon storage in global biomes, global carbon cycle) not only reinforces systems concepts and carbon content, but also introduces students to an important scientific tool necessary for understanding climate change.

  14. Influence de la protection cathodique sur le comportement électrochimique des couches de corrosion d'acier au carbone

    OpenAIRE

    Tran Tron Long , Mai; Sutter , Eliane; Tribollet , Bernard

    2013-01-01

    11 pages, www.mattech-journal.org; International audience; Les propriétés électrochimiques de la couche de dépôts de corrosion formée à la surface des coupons d'acier E24 immergés pendant plusieurs années dans l'eau de mer sous différentes conditions de protection cathodique ont éteé'tudiées à l'aide de la spectroscopie d'impédance électrochimique et de mesures globale et locale de courant. Les résultats obtenus montrent que la couche de dépôts dont le comportement est déterminé par sa sous-c...

  15. Campaign to prevent carbon monoxide poisoning : fall-winter 2007-2008; Campagne de prevention des intoxications au monoxyde de carbone : automne-hiver 2007-2008

    Energy Technology Data Exchange (ETDEWEB)

    Lefebvre, B.; Chabot, L.; Gratton, J. [Direction de sante publique de Montreal, Montreal, PQ (Canada); Lacoursiere, D. [Quebec Ministere de la Sante et des Services sociaux du Quebec, Quebec, PQ (Canada)

    2009-07-01

    Quebec launched a public health campaign for the Montreal region to prevent carbon monoxide poisoning. The objectives of the campaign were to communicate the dangers of carbon monoxide poisoning, its potential sources, its effects on public health, and the means to prevent poisoning. Its purpose was to inform the public of the risks and strategies to be used in case of carbon monoxide poisoning and to lay out the merits of household carbon monoxide alarms. The communication was done by way of the media, in cooperation with community organizations and school boards. Other tools used in the campaign included the Internet, flyers and press releases. A poll taken in 2008 showed that 59 per cent of the respondents had one or more sources for carbon monoxide in their homes, including fireplaces, and that 28 per cent had a functioning alarm for carbon monoxide detection. A future survey will be held to follow-up on the evolution of the campaign. The development of various activities will help decrease the risk of carbon monoxide poisoning. tabs., figs.

  16. Studies on carbon dioxide system in central Arabian sea

    Digital Repository Service at National Institute of Oceanography (India)

    AnilKumar, N.; Singbal, S.Y.S.

    significantly with depth Bicarbonate ion is quantitatively the major component of the carbon dioxide system The observed vertical distributions are discussed in terms of biological and geochemical processes in the sea...

  17. The ``Grey System`` theory and its application to target cost forecasting at Chinese collieries; Die Theorie des grauen Systems und ihre Anwendung bei der Prognose der Zielkosten des gesamten Bergwerks

    Energy Technology Data Exchange (ETDEWEB)

    Ding Rijia; Yi Maosheng; Wang Shiyuan

    1997-09-01

    A production-cost forecasting system has been developed for use at Chinese collieries. Known as the `Grey System`, the theory and model-based process distinguishes between `white` information, which is human controlled, `black` information, which cannot be controlled by human actions, and `grey information`, which forms the majority component and comprises information which can only be partly or not completely collected. A grey system is therefore one in which the necessary information is absent. Future developments in the system can be forecast by analysing the regularity of the time-series values for the technical and economic characteristics of previous periods. The system employs the GM (1.1) prognostic model, which is a `grey` systematic forecasting model with one variable and one linear differential equation. It can be applied to systems which are affected simultaneously be several factors, with no overriding main factor, or in which no marked regularity exists between the controlling factors. The mathematical model constructed on the basis of the `Grey theory` is designed for large-scale economic systems which are affected by several control factors. A bigger system makes for a greater randomness element, which in turn lessens the influence of subjective interference factors and increases the accuracy of the prognosis. (orig./MSK) [Deutsch] Mit Hilfe der Theorie und von Modellen des `grauen Systems` wird eine Prognose der Produktionskosten von chinesischen Bergwerken erstellt. Die Theorie des `grauen Systems` unterscheidet zwischen den von den Menschen beherrschbaren `weissen` Informationen, den von den Menschen nicht beherrschbaren `schwarzen` Informationen und der ueberwiegenden Anzahl der Informationen, die nur teilweise oder nicht vollstaendig erfasst werden koennen und als `graue` Informationen bezeichnet werden. Ein graues System ist folglich ein System, in dem es an notwendigen Informationen fehlt. Die zukuenftige Entwicklung des Systems kann dadurch

  18. Dilepton spectroscopy at intermediate energies; the carbon - carbon reaction at 1 GeV/A; Spectroscopie des dileptons aux energies intermediaires; la reaction carbone - carbone A 1 GeV/A

    Energy Technology Data Exchange (ETDEWEB)

    Prunet, M

    1995-06-01

    The Physics context of this work is heavy ion collisions at relativistic energies where di-electron provide informations on the produced hot and dense nuclear matter. The experiment is performed by the DiLepton Spectrometer (DLS) Collaboration at the Lawrence Berkeley`s Bevalac. After a description of the apparatus, we review the whole program and the main results so far obtained: first evidence of a significant di-electron signal at energies above 1 GeV/A; improvement of the understanding of di-electron production (electromagnetic decays of hadrons, {pi}{sup +}{pi}{sup -} annihilation and hadronic Bremsstrahlung). The results of p-p, p-d reactions from 1 to 4.9 GeV/A show that hadronic Bremsstrahlung (pp, pn) should be reformulated. Our analysis, optimized on the reaction Carbon-Carbon at 1 GeV/A, has been applied to {alpha}-Ca and d-Ca. We have developed two main aspects: improvement of the time resolution (500 ps) in order to eliminate all of the protons. Improvement of the space resolution (300 {mu}) for better mass resolution, in particular in the {rho} region. We obtain the cross section of di-electron production as a function of mass, transverse momentum and rapidity from the C-C, {alpha}-Ca and d-Ca reactions at 1 GeV/A. We also compare the cross section for all of the measured systems at 1 GeV/A, including Ca-Ca, and we show a (ApAt){sup {alpha}} dependence with {alpha} {approx_equal} 1.1. A study of the associated multiplicity has also been performed. Nevertheless, the limited acceptance of the DLS and its poor mass resolution to identify the {rho}, {omega} vector mesons, do not allow to conclude on hadron behaviour in nuclear matter. This point is one of the main goal of the HADES project at GSI (Darmstadt), which we give a brief description of the main features. (authors). 60 refs.

  19. A study on hydrogen storage through adsorption in nano-structured carbons; Etude du stockage d'hydrogene par adsorption dans des carbones nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Langohr, D

    2004-10-15

    The aim of this work is to build and calibrate an experimental set-up for the testing of the materials, to produce some carbon materials in large amounts and characterise them, and finally, to test these materials in their ability to store hydrogen. This will help in establishing a link between the hydrogen storage capacities of the carbons and their nano-structure. The script is divided into four chapters. The first chapter will deal with the literature review on the thematic of hydrogen storage through adsorption in the carbon materials, while the second chapter will present the experimental set-up elaborated in the laboratory. The third chapter explains the processes used to produce the two families of carbon materials and finally, the last chapter presents the structural characterisation of the samples as well as the experimental results of hydrogen storage on the materials elaborated. (author)

  20. A study on hydrogen storage through adsorption in nano-structured carbons; Etude du stockage d'hydrogene par adsorption dans des carbones nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Langohr, D

    2004-10-15

    The aim of this work is to build and calibrate an experimental set-up for the testing of the materials, to produce some carbon materials in large amounts and characterise them, and finally, to test these materials in their ability to store hydrogen. This will help in establishing a link between the hydrogen storage capacities of the carbons and their nano-structure. The script is divided into four chapters. The first chapter will deal with the literature review on the thematic of hydrogen storage through adsorption in the carbon materials, while the second chapter will present the experimental set-up elaborated in the laboratory. The third chapter explains the processes used to produce the two families of carbon materials and finally, the last chapter presents the structural characterisation of the samples as well as the experimental results of hydrogen storage on the materials elaborated. (author)

  1. Modeling and calculation of open carbon dioxide refrigeration system

    International Nuclear Information System (INIS)

    Cai, Yufei; Zhu, Chunling; Jiang, Yanlong; Shi, Hong

    2015-01-01

    Highlights: • A model of open refrigeration system is developed. • The state of CO 2 has great effect on Refrigeration capacity loss by heat transfer. • Refrigeration capacity loss by remaining CO 2 has little relation to the state of CO 2 . • Calculation results are in agreement with the test results. - Abstract: Based on the analysis of the properties of carbon dioxide, an open carbon dioxide refrigeration system is proposed, which is responsible for the situation without external electricity unit. A model of open refrigeration system is developed, and the relationship between the storage environment of carbon dioxide and refrigeration capacity is conducted. Meanwhile, a test platform is developed to simulation the performance of the open carbon dioxide refrigeration system. By comparing the theoretical calculations and the experimental results, several conclusions are obtained as follows: refrigeration capacity loss by heat transfer in supercritical state is much more than that in two-phase region and the refrigeration capacity loss by remaining carbon dioxide has little relation to the state of carbon dioxide. The results will be helpful to the use of open carbon dioxide refrigeration

  2. Differential diagnostics of the musculoskeletal system in sports medicine; Differenzialdiagnostische Untersuchung in der Sportmedizin des Bewegungsapparats

    Energy Technology Data Exchange (ETDEWEB)

    Nehrer, S. [Donau-Universitaet Krems, Department fuer Klinische Medizin und Biotechnologie, Zentrum fuer Regenerative Medizin, Krems (Austria)

    2010-05-15

    The positive effects of sports on the cardiovascular and musculoskeleal systems are widely accepted. Nevertheless, sports also can cause injury and overuse leading to sport-specific problems, which are often a challenge in diagnosing and treatment. The history of the sport-related injury is crucial for further differential diagnosis. Careful inspection, palpation and functional testing can reveal the possible pathology and lead to an effective strategy in the diagnostic assessment using radiographic tools such as sonography, X-ray and MR imaging (MRI). In muscle and tendon injuries sonography can provide ready to use information concerning muscle tears and tendon ruptures or degenerative lesions. Plain X-rays give a good overview on joint conditions regarding the bone and sometimes have to be completed by focused enlargement of the critical structure, especially in stress fractures and small bone lesions. MRT is the gold standard in the evaluation of interarticular and extra-articular sport-related pathologies, however, an exact clinical diagnosis allows a more effective investigation protocol. Profound knowledge of possible sport-specific injury and overuse patterns is necessary to detect lesions of the musculoskeletal system in active athletes and to use the fitting radiographic strategy for confirmation. The exact diagnosis is the prerequisite for initiating the appropriate treatment and a fast sports medical rehabilitation process. (orig.) [German] Die positive Auswirkung von Sport auf das Herz-Kreislauf-System und den Bewegungsapparat ist weitgehend gesichert. Trotzdem kann es bei der Sportausuebung zu sportspezifischen Problemen kommen, die den Sportarzt bei der Abklaerung dieser Schmerzsyndrome oft vor grosse Herausforderungen stellen. Die Ursache von Sportschaeden und Verletzungen sind einerseits akute Traumata, andererseits aber auch Ueberlastungen oder Kombinationen von beiden. Die Erhebung einer Anamnese unter Beruecksichtigung sportspezifischer Aspekte

  3. The investment funds in carbon actives: state of the art; Les fonds d'investissement dans les actifs carbone: etat des lieux

    Energy Technology Data Exchange (ETDEWEB)

    Dominicis, A. de

    2005-01-15

    Since the beginning in 1999 of the first funds by the World Bank, the purchase mechanisms of carbon actives, developed and reached today more than 1,5 milliards of euros. The landscape is relatively concentrated, in spite of the numerous initiatives. The author presents the situation since 1999, the importance of the european governmental investors, the purchase mechanisms management and an inventory of the carbon actives purchases. (A.L.B.)

  4. Soil-Carbon Measurement System Based on Inelastic Neutron Scattering

    International Nuclear Information System (INIS)

    Orion, I.; Wielopolski, L.

    2002-01-01

    Increase in the atmospheric CO 2 is associated with concurrent increase in the amount of carbon sequestered in the soil. For better understanding of the carbon cycle it is imperative to establish a better and extensive database of the carbon concentrations in various soil types, in order to develop improved models for changes in the global climate. Non-invasive soil carbon measurement is based on Inelastic Neutron Scattering (INS). This method has been used successfully to measure total body carbon in human beings. The system consists of a pulsed neutron generator that is based on D-T reaction, which produces 14 MeV neutrons, a neutron flux monitoring detector and a couple of large NaI(Tl), 6'' diameter by 6'' high, spectrometers [4]. The threshold energy for INS reaction in carbon is 4.8 MeV. Following INS of 14 MeV neutrons in carbon 4.44 MeV photons are emitted and counted during a gate pulse period of 10 μsec. The repetition rate of the neutron generator is 104 pulses per sec. The gamma spectra are acquired only during the neutron generator gate pulses. The INS method for soil carbon content measurements provides a non-destructive, non-invasive tool, which can be optimized in order to develop a system for in field measurements

  5. Analysis of the German market for voluntary carbon offsetting; Analyse des deutschen Marktes zur freiwilligen Kompensation von Treibhausgasemissionen

    Energy Technology Data Exchange (ETDEWEB)

    Kind, Christian; Duwe, Sebastian; Taenzler, Dennis; Reuster, Lena [adelphi research gGmbH, Berlin (Germany); Kleemann, Max; Krebs, Jan-Marten [sustainable AG, Muenchen (Germany)

    2010-12-15

    In the past years the market for voluntary carbon offsetting has developed rapidly. Certificates sold on this market originate partly from the compliance market, i.e. from projects of the Clean Development Mechanism and the Joint Implementation. Mostly, however, certificates stem from projects of the voluntary carbon market. Voluntary carbon offsetting can serve as another mechanism to efficiently prevent emissions, while at the same time achieving co-benefits. Very little is known however of the exact state of the voluntary carbon market, e.g. factors like business volume, market actors, origin of certificates or the efficacy of the voluntary market. Analyses of the market on the global market for voluntary offsetting do exist (ENDS, Hamilton et al. 2007, 2008, 2009); however they do not allow any conclusions for the market situation in Germany. This study aims at closing this gap. From the end of 2009 until the beginning of 2010 adelphi and sustainable interviewed providers of offset services, intermediaries, certifiers and consumers like businesses and public institutions on their activities in the voluntary carbon offset market in Germany. (orig.)

  6. Numerical Study on Density Gradient Carbon-Carbon Composite for Vertical Launching System

    Science.gov (United States)

    Yoon, Jin-Young; Kim, Chun-Gon; Lim, Juhwan

    2018-04-01

    This study presents new carbon-carbon (C/C) composite that has a density gradient within single material, and estimates its heat conduction performance by a numerical method. To address the high heat conduction of a high-density C/C, which can cause adhesion separation in the steel structures of vertical launching systems, density gradient carbon-carbon (DGCC) composite is proposed due to its exhibiting low thermal conductivity as well as excellent ablative resistance. DGCC is manufactured by hybridizing two different carbonization processes into a single carbon preform. One part exhibits a low density using phenolic resin carbonization to reduce heat conduction, and the other exhibits a high density using thermal gradient-chemical vapor infiltration for excellent ablative resistance. Numerical analysis for DGCC is performed with a heat conduction problem, and internal temperature distributions are estimated by the forward finite difference method. Material properties of the transition density layer, which is inevitably formed during DGCC manufacturing, are assumed to a combination of two density layers for numerical analysis. By comparing numerical results with experimental data, we validate that DGCC exhibits a low thermal conductivity, and it can serve as highly effective ablative material for vertical launching systems.

  7. Study of the diffusion of iron, of silver and of carbon in beryllium using radioactive tracers; Etude de la diffusion du fer, de l'argent et du carbone dans le beryllium au moyen des traceurs radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Naik, M Ch [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-06-01

    A study has been made of the diffusion of radioactive iron and silver tracers in beryllium. The following values have been found. D{sub Fe} = 0.53 exp - [51800 / RT], D{sub Ag} = 62 exp - [46100 / RT]. The values for iron are in good agreement with those found previously for chemical diffusion. A comparison of the diffusion coefficients for iron, silver and nickel shows that the diffusion rate increases with increasing solute atom radius. The existence has been shown of diffusion anisotropy for silver; it has been studied quantitatively on monocrystals. It is found that: D{sub parallel} 0.41 exp - [39100 / RT], D{sub perpendicular} = 1.98 exp - [45700 / RT]. The anisotropy decreases as the temperature increases. The silver diffuses more rapidly along the C axis than in the base plane. This result cannot be explained in terms of the model proposed for the diffusion of foreign atoms in solution in zinc. A greater number of experiments is required before a model can be put forward. An attempt has also been made to determine the diffusion coefficients of carbon in beryllium by treatment in an atmosphere of acetylene marked with C-14. Diffusion coefficients have been obtained but these should not be considered to be very significant since a chemical reaction occurs at the surface of the samples. (author) [French] On a etudie la diffusion dans le beryllium de traceurs radioactifs du fer et de l'argent. On trouve: D{sub Fe} = 0.53 exp - [51800 / RT], D{sub Ag} = 62 exp - [46100 / RT].Les valeurs trouvees pour le fer sont en bon accord avec les valeurs obtenues precedemment pour la diffusion chimique. La comparaison des coefficients de diffusion du fer, de l'argent et du nickel montre que la diffusion est d'autant plus rapide que le rayon atomique du solute est plus grand. On a mis en evidence une anisotropie de diffusion de l'argent qui a ete etudiee quantitativement sur des monocristaux. On trouve: D{sub parallele} = 0.41 exp - [39100 / RT], D{sub perpendiculaire} = 1

  8. Carbon Nanotubes as Future Energy Storage System

    OpenAIRE

    Vasu , V; Silambarasan , D

    2017-01-01

    International audience; Hydrogen is considered to be a clean energy carrier. At present the main drawback in using hydrogen as the fuel is the lack of proper hydrogen storage vehicle, thus ongoing research is focused on the development of advance hydrogen storage materials. Many alloys are able to store hydrogen reversibly, but the gravimetric storage density is too low for any practical applications. Theoretical studies have predicted that interaction of hydrogen with carbon nanotubes is by ...

  9. Electromagnetic compatibility design and cabling system rules; Regles de conception et de cablage des systemes electroniques

    Energy Technology Data Exchange (ETDEWEB)

    Raimbourg, J.

    2009-07-01

    This report is devoted to establish EMC (Electromagnetic Compatibility) design and cabling system rules. It is intended for hardware designers in charge of designing electronic maps or integrating existing materials into a comprehensive system. It is a practical guide. The rules described in this document do not require enhanced knowledge of advanced mathematical or physical concepts. The key point is to understand phenomena with a pragmatic approach to highlight the design and protection rules. (author)

  10. Fabrication of 3D Carbon Microelectromechanical Systems (C-MEMS).

    Science.gov (United States)

    Pramanick, Bidhan; Martinez-Chapa, Sergio O; Madou, Marc; Hwang, Hyundoo

    2017-06-17

    A wide range of carbon sources are available in nature, with a variety of micro-/nanostructure configurations. Here, a novel technique to fabricate long and hollow glassy carbon microfibers derived from human hairs is introduced. The long and hollow carbon structures were made by the pyrolysis of human hair at 900 °C in a N2 atmosphere. The morphology and chemical composition of natural and pyrolyzed human hairs were investigated using scanning electron microscopy (SEM) and electron-dispersive X-ray spectroscopy (EDX), respectively, to estimate the physical and chemical changes due to pyrolysis. Raman spectroscopy was used to confirm the glassy nature of the carbon microstructures. Pyrolyzed hair carbon was introduced to modify screen-printed carbon electrodes ; the modified electrodes were then applied to the electrochemical sensing of dopamine and ascorbic acid. Sensing performance of the modified sensors was improved as compared to the unmodified sensors. To obtain the desired carbon structure design, carbon micro-/nanoelectromechanical system (C-MEMS/C-NEMS) technology was developed. The most common C-MEMS/C-NEMS fabrication process consists of two steps: (i) the patterning of a carbon-rich base material, such as a photosensitive polymer, using photolithography; and (ii) carbonization through the pyrolysis of the patterned polymer in an oxygen-free environment. The C-MEMS/NEMS process has been widely used to develop microelectronic devices for various applications, including in micro-batteries, supercapacitors, glucose sensors, gas sensors, fuel cells, and triboelectric nanogenerators. Here, recent developments of a high-aspect ratio solid and hollow carbon microstructures with SU8 photoresists are discussed. The structural shrinkage during pyrolysis was investigated using confocal microscopy and SEM. Raman spectroscopy was used to confirm the crystallinity of the structure, and the atomic percentage of the elements present in the material before and after

  11. A Poromechanical Model for Coal Seams Injected with Carbon Dioxide: From an Isotherm of Adsorption to a Swelling of the Reservoir Un modéle poromécanique pour l’injection de dioxyde de carbone dans des veines de charbon : d’une isotherme d’adsorption à un gonflement du réservoir

    Directory of Open Access Journals (Sweden)

    Nikoosokhan S.

    2012-11-01

    Full Text Available Injecting carbon dioxide into deep unminable coal seams can enhance the amount of methane recovered from the seam. This process is known as CO2-Enhanced Coal Bed Methane production (CO2-ECBM. The seam is a porous medium whose porous system is made of cleats (small natural fractures and of coal pores (whose radius can be as small as a few angström. During the injection process, the molecules of CO2 get adsorbed in the coal pores. Such an adsorption makes the coal swell, which, in the confined conditions that prevail underground, induces a closure of the cleat system of the coal bed reservoir and a loss of injectivity. In this work, we develop a poromechanical model which, starting from the knowledge of an adsorption isotherm and combined with reservoir simulations, enables to estimate the variations of injectivity of the coal bed reservoir over time during the process of injection. The model for the coal bed reservoir is based on poromechanical equations that explicitly take into account the effect of adsorption on the mechanical behavior of a microporous medium. We consider the coal bed reservoir as a dual porosity (cleats and coal porosity medium, for which we derive a set of linear constitutive equations. The model requires as an input the adsorption isotherm on coal of the fluid considered. Reversely, the model provides a way to upscale an adsorption isotherm into a meaningful swelling of the coal bed reservoir at the macroscopic scale. The parameters of the model are calibrated on data on coal samples available in the literature. Reservoir simulations of an injection of carbon dioxide in a coal seam are performed with an in-house finite volume and element code. The variations of injection rate over time during the process of injection are obtained from the simulations. The effect of the compressibility of the coal matrix on those variations is discussed. L’injection de dioxyde de carbone dans des veines de charbon profondes peut augmenter

  12. Generation of brake squeal. Fundamental vibration in brake system; Entstehungsmechanismus des Bremsenquietschens. Grundschwingung im Bremssystem

    Energy Technology Data Exchange (ETDEWEB)

    Shi Xiaoming; Mitschke, M.

    1997-11-01

    Reducing or preventing brake squealing is a prime goal of brake development. To provide constructional means of doing this the mechanism by which it occurs must first be understood. Research at the Technical University of Braunschweig now offers a plausible explanation. (orig.) [Deutsch] Die Verringerung oder Vermeidung des Bremsenquietschens ist ein wichtiges Ziel der Bremsenentwicklung. Um konstruktiv Abhilfe zu schaffen, muss zunaechst der Entstehungsmechanismus fuer dieses unerwuenschte Geraeusch geklaert werden. Forschung an der Technischen Universitaet Braunschweig ermoeglicht jetzt eine plausible Erklaerung. (orig.)

  13. Einfluss hochfrequenter Felder des Mobilfunks auf das blutbildende System in vitro

    OpenAIRE

    Gläser, Katharina

    2017-01-01

    Elektromagnetische Felder (EMF) sind in der Umwelt des Menschen allgegenwärtig. Unter Verwendung unterschiedlicher Frequenzen bilden sie die Grundlage zahlreicher Technologien und begegnen uns im Alltag in einer Vielzahl von Anwendungen. Eine sehr wichtige Anwendung von EMF ist die mobile Kommunikation. Die hierfür verwendeten Frequenzen liegen im hochfrequenten Bereich und variieren mit dem Mobilfunkstandard. Weit verbreitet ist die GSM- und UMTS-Modulation der zweiten (2G) und dritten Gener...

  14. Replacement of CFCs in thermodynamical systems; Remplacement des CFC dans les systemes thermodynamiques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Some chlorofluorocarbons (CFCs) are well-adapted to coldness production by vapour compression and thus are widely used in the storage of agriculture-food products from the production to the domestic consumer but also in air-conditioning systems and heat pumps. Atmospheric impacts of the use of CFCs (`ozone hole`) led the international community to adopt remedial measures which aim to prohibit the production of CFCs. These constraints led the users of refrigerating fluids to use substitution fluids and to develop new techniques of energy recovery and heat/coldness production. This workshop takes stock of this situation and of the problems encountered by the various actors involved in the replacement of CFCs in thermodynamical systems: evolutions of regulation, point of view of refrigerating fluid producers and of compressors and heat exchangers manufacturers, research studies on substitution fluids, recovery of CFCs and other refrigerating fluids, revival in the use of natural fluids (like ammonia), and use of new thermodynamical systems like compression/absorption (water/ammonia) cycles. (J.S.)

  15. Cooperative water network system to reduce carbon footprint.

    Science.gov (United States)

    Lim, Seong-Rin; Park, Jong Moon

    2008-08-15

    Much effort has been made in reducing the carbon footprint to mitigate climate change. However, water network synthesis has been focused on reducing the consumption and cost of freshwater within each industrial plant. The objective of this study is to illustrate the necessity of the cooperation of industrial plants to reduce the total carbon footprint of their water supply systems. A mathematical optimization model to minimize global warming potentials is developed to synthesize (1) a cooperative water network system (WNS) integrated over two plants and (2) an individual WNS consisting of two WNSs separated for each plant. The cooperative WNS is compared to the individual WNS. The cooperation reduces their carbon footprint and is economically feasible and profitable. A strategy for implementing the cooperation is suggested for the fair distribution of costs and benefits. As a consequence, industrial plants should cooperate with their neighbor plants to further reduce the carbon footprint.

  16. Short Communication: Soil carbon pools in different pasture systems

    Energy Technology Data Exchange (ETDEWEB)

    Cardozo, F.M. Jr.; Carneiro, R.F.V.; Leite, L.F.C.; Araujo, A.S.F.

    2016-11-01

    The aim of this study was to assess the carbon pools of a tropical soil where the native forest was replaced with different pasture systems. We studied five pasture production systems, including four monoculture systems with forage grasses such as Andropogon, Brachiaria, Panicum, and Cynodon, and an agroforestry system as well as a native vegetation plot. Greater availability of fulvic acid was detected in the agroforestry system as compared with that in the other systems. Higher lability of C was detected in the Andropogon system during the dry and rainy seasons and during the dry season in Cynodon. During the dry season, all pastures systems showed deficits in the net removal of atmospheric CO2. The structure and practices of the agroforestry system enables more carbon to be sequestered in the soil as compared with the monoculture pasture, suggesting that it is an important practice to mitigate climatic change and to improve soil quality. (Author)

  17. Carbon footprint from dairy farming system

    DEFF Research Database (Denmark)

    Della Riva, A.; Kristensen, Troels; De Marchi1, M.

    2014-01-01

    Aim of the present study was to estimate the carbon footprint (CF) of milk production at farm gate considering two dairy cattle breeds, Holstein Friesian (HF) and Jersey (JE). Using Italian inventory data the emissions of CO2eq per kg ECM for dairy herds of HF and JE breed were estimated. The res......Aim of the present study was to estimate the carbon footprint (CF) of milk production at farm gate considering two dairy cattle breeds, Holstein Friesian (HF) and Jersey (JE). Using Italian inventory data the emissions of CO2eq per kg ECM for dairy herds of HF and JE breed were estimated....... The results show 0.80 kg CO2eq/kg ECM in JE herd, while 0.96 kg CO2eq/kg ECM in HF herd. The main differences were due to the level of dry matter intake, milk yield and fertility traits. Indeed, JE herd showed a lower milk yield than HF herd, a lower DMI and better fertility, determining less production...

  18. System und Verfahren zur Kommunikation mit an Objekten anbringbaren Transpondern sowie Verwendung des Systems

    OpenAIRE

    Richter, K.; Röben, H.; Meyer, T.

    2006-01-01

    DE 102006047356 B3 UPAB: 20080501 NOVELTY - The system has a reading device (4) including transmission/reception device (5) with an antenna (6), and a border strip (1) defining a selection area for the admission of objects e.g. goods (2), which is provided with a metallic screen. The antenna is arranged within or to the border strip. A device (7) is provided for changing field distribution produced by the antenna in the area, where the distribution distorts electromagnetic waves in the area s...

  19. Utilization of HTGR on active carbon recycling energy system

    Energy Technology Data Exchange (ETDEWEB)

    Kato, Yukitaka, E-mail: yukitaka@nr.titech.ac.jp

    2014-05-01

    A new energy transformation concept based on carbon recycling, called as active carbon recycling energy system, ACRES, was proposed for a zero carbon dioxide emission process. The ACRES is driven availably by carbon dioxide free primary energy. High temperature gas cooled reactor (HTGR) is a candidate of the energy sources for ACRES. A smart ironmaking system with ACRES (iACRES) is one of application examples. The contribution of HTGR on iACRES was discussed thermodynamically in this study. A carbon material is re-used cyclically as energy carrier media in ACRES. Carbon monoxide (CO) had higher energy densities than hydrogen and was compatible with conventional process. Thus, CO was suitable recycling media for ACRES. Efficient regeneration of CO was a key technology for ACRES. A combined system of hydrogen production by water electrolysis and CO{sub 2} hydrogen reduction was candidate. CO{sub 2} direct electrolysis was also one of the candidates. HTGR was appropriate heat source for both water and CO{sub 2} electrolysises, and CO{sub 2} hydrogen reduction. Thermodynamic energy balances were calculated for both systems with HTGR for an ironmaking system. The direct system showed relatively advantage to the combined system in the stand point of enthalpy efficiency and simplicity of the process. One or two plants of HTGR are corresponding with ACRES system for one unit of conventional blast furnace. The proposed ACRES system with HTGR was expected to form the basis of a new energy industrial process that had low CO{sub 2} emission.

  20. Study of uranium (VI) in carbonate solution by potentiometric titrations and ion-exchange; Etude des solutions d'uranium (VI) en milieu carbonate par titrages potentiometriques et echange d'ions

    Energy Technology Data Exchange (ETDEWEB)

    Billon, A. [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-04-01

    'ion molybdate MoO{sub 4}{sup 2-}. La separation est possible en milieu carbonate 1 M sur de petites quantites, en utilisant la technique de l'elution. Il est suggere une possibilite de separation a une echelle plus importante basee sur le deplacement du molybdene par l'uranium en milieu hydrogenocarbonate 0.5 M (le rapport des coefficients de selectivite est alors tres grand). (auteur)

  1. Cycle for innovative nuclear Gen 4. systems=; Cycle des systemes du futur

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    In the framework of the development of nuclear systems of the 4. generation, the preliminary and schematic reprocessing goals are a cleaning of fission products without a priori separation of the different actinides. The objective of the workshop is to exchange information about the potential efficiency of innovative fuel processing treatments in order to evaluate the impact of impurities on the design of the fuel during its re-fabrication and re-introduction inside the reactor, and on the materials and systems. This document gathers the slides of the 18 presentations given at this workshop: 1 - from the PWR fuel to the closed cycle fast spectrum concepts of generation 4 systems (P. Anzieu, F. Carre, Ph. Brossard, M. Delpech); 2 - the double strata scenarios: objectives and characteristics (S. David and F. Varaine); 3 - why a molten salts thorium file (D. Heuer); 4 - the common 'molten salts' research program of the CNRS (D. Heuer, S. Sanchez); 5 - the hydro-metallurgical reprocessing, the knowledge gained and the statuses of the 5. PCRD, synthesis of the OECD works (C. Madic); 6 - pyro-chemistry: Pyropep status (H. Boussier); 7 - technological bolts identified during the Most project of the 5. PCRD (C. Renault, Ch. Le Brun, M. Delpech and C. Garzenne); 8 - the molten salt reactor concept and its reprocessing options, expected efficiencies (L. Mathieu); 9 - methodology of evaluation of pyro-chemical fuel reprocessing schemes (H. Boussier); 10 - molten salt reactor, design-aided tools for the reactor and the reprocessing plant (O. Gastaldi, E. Walle, O. Koberl, D. Lecarpentier); 11 - status of CEA's prospective studies for the front-end of the fuel reprocessing process/dry ways (S. Bourg); 12 - results of activity coefficient measurements in liquid metals (J. Finne, E. Walle, G. Picard, S. Sanchez and O. Conocar); 13 - potentialities of electrolytic separation and liquid-liquid extraction processes (molten salts/molten metal) for the multi

  2. Pade approximants in field theory: pion and kaon systems; Approximants de pade en theorie des champs: systeme de pions et de kaons

    Energy Technology Data Exchange (ETDEWEB)

    Zinn-Justin, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    We construct the Pade approximants of the S-matrix, starting from the perturbation series, in the case of two body pion and kaon systems. We have three parameters. The seven lowest lying two body resonances ({rho}, K{sup *}(890), {phi}, K{sup *}(1420), f{sub 0}, f', A{sub 2}) are obtained within a few per cent of their actual masses. The Regge trajectories are rising, the intercepts of the {rho} and f{sub 0} agree well with the experimental values. In the appendices we give some properties and applications of the Pade approximants. (author) [French] Nous avons construit les approximants de Pade de la matrice S a partir de la serie formelle des perturbations, dans le cas des systemes a deux corps de pions et de kaons. Le probleme depend de trois parametres. Nous avons obtenu les sept resonances meson-meson a deux corps ({rho}, K{sup *}(890), {phi}, K{sup *}(1420), f{sub 0}, f', A{sub 2}) a quelques pour cent de leurs masses experimentales. Les trajectoires de Regge sont trouvees croissantes, les intercepts du {rho} et du f{sub 0} sont en bon accord avec l'experience. Dans les appendices nous donnons quelques proprietes et applications des approximants de Pade. (auteur)

  3. Pade approximants in field theory: pion and kaon systems; Approximants de pade en theorie des champs: systeme de pions et de kaons

    Energy Technology Data Exchange (ETDEWEB)

    Zinn-Justin, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    We construct the Pade approximants of the S-matrix, starting from the perturbation series, in the case of two body pion and kaon systems. We have three parameters. The seven lowest lying two body resonances ({rho}, K{sup *}(890), {phi}, K{sup *}(1420), f{sub 0}, f', A{sub 2}) are obtained within a few per cent of their actual masses. The Regge trajectories are rising, the intercepts of the {rho} and f{sub 0} agree well with the experimental values. In the appendices we give some properties and applications of the Pade approximants. (author) [French] Nous avons construit les approximants de Pade de la matrice S a partir de la serie formelle des perturbations, dans le cas des systemes a deux corps de pions et de kaons. Le probleme depend de trois parametres. Nous avons obtenu les sept resonances meson-meson a deux corps ({rho}, K{sup *}(890), {phi}, K{sup *}(1420), f{sub 0}, f', A{sub 2}) a quelques pour cent de leurs masses experimentales. Les trajectoires de Regge sont trouvees croissantes, les intercepts du {rho} et du f{sub 0} sont en bon accord avec l'experience. Dans les appendices nous donnons quelques proprietes et applications des approximants de Pade. (auteur)

  4. Carbon footprint of the Danish electricity transmission and distribution systems

    DEFF Research Database (Denmark)

    Turconi, Roberto; Astrup, Thomas Fruergaard

    . The purpose was to evaluate the potential importance of environmental impacts associated with T&D in current and future electricity systems. Including the emissions from electricity T&D is needed to provide a full carbon footprint of electricity systems, and is essential to properly assess the environmental...

  5. 50 Modélisation des propriétés diélectriques des nanocomposites ...

    African Journals Online (AJOL)

    AKA BOKO

    3 Laboratoire de Physique des Solides et des Couches Minces, Faculté des Sciences,. Sémlalia ... renfort (fibres de verre, carbone ou Kevlar,..) ont alors été utilisés ... diélectrique. Par ailleurs, pour modéliser le comportement diélectrique à la.

  6. Multi scale study of carbon deposits collected in Tore-Supra and TEXTOR tokamaks; Etude multi echelle des depots carbones collectes dans les tokamaks Tore Supra et TEXTOR

    Energy Technology Data Exchange (ETDEWEB)

    Richou, M

    2007-06-15

    Tokamaks are devices aimed at studying magnetic fusion. They operate with high temperature plasmas containing hydrogen, deuterium or tritium. One of the major issue is to control the plasma-wall interaction. The plasma facing components are most often in carbon. The major drawback of carbon is the existence of carbon deposits and dust, due to erosion. Dust is potentially reactive in case of an accidental opening of the device. These deposits also contain H, D or T and induce major safety problems when tritium is used, which will be the case in ITER. Therefore, the understanding of the deposit formation and structure has become a main issue for fusion researches. To clarify the role of the deposits in the retention phenomenon, we have done different complementary characterizations for deposits collected on similar places (neutralizers) in tokamaks Tore Supra (France) and TEXTOR (Germany). Accessible microporous volume and pore size distribution of deposits has been determined with the analysis of nitrogen and methane adsorption isotherms using the BET, Dubinin-Radushkevich and {alpha}{sub s} methods and the Density Functional Theory (DFT). To understand growth mechanisms, we have studied the deposit structure and morphology. We have shown using Transmission Electron Microscopy (TEM) and Raman micro-spectrometry that these deposits are non amorphous and disordered. We have also shown the presence of nano-particles (diameter between 4 and 70 nm) which are similar to carbon blacks: nano-particle growth occurs in homogeneous phase in the edge plasma. We have emphasised a dual growth process: a homogenous and a heterogeneous one. (author)

  7. Localized corrosion of carbon steels due to sulfate-reducing bacteria. Development of a specific sensor; Corrosion localisee des aciers au carbone induite par des bacteries sulfato-reductrices. Developpement d'un capteur specifique

    Energy Technology Data Exchange (ETDEWEB)

    Monfort Moros, N.

    2001-11-01

    This work concerns the microbiologically influenced corrosion of carbon steels in saline anaerobic media (3% of NaCl) containing sulfato-reducing bacteria (Desulfovibrio gabonensis, DSM 10636). In these media, extreme localised corrosion occurs by pitting under the bio-film covering the metallic substrate. A sensor with concentric electrodes was designed to initiate the phenomenon of bio-corrosion, recreating the favourable conditions for growth of a corrosion pit, and then measuring the corrosion current maintained by bacterial activity. The pit initiation was achieved through either of two methods. The electrochemical conditioning involved driving the potential difference between inner and outer electrodes to values corresponding to a galvanic corrosion that can be maintained by the bacterial metabolism. The mechanical process involved removal of a portion of the bio-film by scratching, yielding galvanic potential differences equivalent to that found by the conditioning technique. This protocol was found to be applicable to a bio-corrosion study on industrial site for the monitoring of the metallic structures deterioration (patent EN 00/06114, May 2000). Thereafter, a fundamental application uses the bio-corrosion sensor for Electrochemical Impedance Spectroscopy (EIS), Electrochemical Noise Analysis (ENA) and current density cartography by the means of micro-electrodes. Thus, the EIS technique reveals the importance of the FeS corrosion products for initiation of bio-corrosion start on carbon steel. In addition, depending on the method used to create a pit, the ENA gives rise to supplementary processes (gaseous release) disturbing the bio-corrosion detection. The beginning of a bio-corrosion process on a clean surface surrounded with bio-film was confirmed by the current density cartography. These different results establish the sensor with concentric electrodes as an indispensable tool for bio-corrosion studies, both in the laboratory and on industrial sites

  8. Typologie des systemes d'elevage bovin de la commune de ...

    African Journals Online (AJOL)

    Afin de caractériser les systèmes d'élevage bovin de la commune de Gogounou au nord-est du Bénin, une enquête concernant 102 élevages ayant un effectif total de 7.769 têtes de bovins a été réalisée. En utilisant les méthodes d'analyse factorielle des correspondances multiples (AFCM) et de classification hiérarchique ...

  9. La gestion dynamique des varietes d'ignames dans le systeme ...

    African Journals Online (AJOL)

    Les origines de la diversité variétale des ignames et le maintien de cette diversité ont été étudiés dans 240 exploitations du Bénin réparties dans huit terroirs, 150 ans l'aire culturelle Bariba (sous-préfecture de Sinendé de juin à octobre 1999) et 90 dans l'aire Nagot (sous-préfecture de Banté, de juin à octobre 2000).

  10. Caractérisation des systemes de production à base de maïs dans ...

    African Journals Online (AJOL)

    La présente recherche vise à caractériser les systèmes de production à base de maïs au Bénin pour un appui-conseil ciblé aux producteurs de maïs. La base de sondage est la base de données du sous-projet "Centre National de Spécialisation sur le Maïs", exécuté par l'Institut National des Recherches Agricoles du Bénin ...

  11. In-Space Repair of Reinforced Carbon-Carbon Thermal Protection System Structures

    Science.gov (United States)

    Singh, Mrityunjay

    2006-01-01

    Advanced repair and refurbishment technologies are critically needed for the thermal protection system of current space transportation system as well as for future Crew Exploration Vehicles (CEV). The damage to these components could be caused by impact during ground handling or due to falling of ice or other objects during launch. In addition, in-orbit damage includes micrometeoroid and orbital debris impact as well as different factors (weather, launch acoustics, shearing, etc.) during launch and re-entry. The GRC developed GRABER (Glenn Refractory Adhesive for Bonding and Exterior Repair) material has shown multiuse capability for repair of small cracks and damage in reinforced carbon-carbon (RCC) material. The concept consists of preparing an adhesive paste of desired ceramic with appropriate additives and then applying the paste to the damaged/cracked area of the RCC composites with adhesive delivery system. The adhesive paste cures at 100-120 C and transforms into a high temperature ceramic during simulated entry conditions. A number of plasma torch and ArcJet tests were carried out to evaluate the crack repair capability of GRABER materials for Reinforced Carbon-Carbon (RCC) composites. For the large area repair applications, integrated system for tile and leading edge repair (InSTALER) have been developed. In this presentation, critical in-space repair needs and technical challenges as well as various issues and complexities will be discussed along with the plasma performance and post test characterization of repaired RCC materials.

  12. Plant litter decomposition and carbon sequestration for arable soils. Final report of works. April 2005; Biodegradation des litieres et sequestration du carbone dans les ecosystemes cultives et perennes. Rapport final des travaux Avril 2005

    Energy Technology Data Exchange (ETDEWEB)

    Recous, S.; Barrois, F.; Coppens, F.; Garnier, P.; Grehan, E. [Institut National de Recherches Agronomiques (INRA), Unite d' Agronomie Laon-Reims-Mons (France); Balesdent, J. [CNRS-CEA-Univ.de la Mediterranee, UMR 6191, Lab. d' Ecologie Microbienne de la Rhizosphere, 13 - Saint Paul lez Durance (France); Dambrine, E.; Zeller, B. [Institut National de Recherches Agronomiques (INRA), Unite Biogeochimie des Ecosystemes Forestiers, 54 - Nancy (France); Loiseau, P.; Personeni, E. [Institut National de Recherches Agronomiques (INRA), Unite d' Agronomie, 63 - Clermont-Ferrand (France)

    2002-07-01

    The general objective of this project was to contribute to the evaluation of land use and management impacts on C sequestration and nitrogen dynamics in soils. The land used through the presence/absence of crops and their species, and the land management through tillage, localisation of crop residues, fertilizer applications,... are important factors that affect the dynamics of organic matters in soils, particularly the mineralization of C and N, the losses to the atmosphere and hydrosphere, the retention of carbon into the soil. This project was conducted by four research groups, three of them having expertise in nutrient cycling of three major agro-ecosystems (arable crops, grasslands, forests) and the fourth one having expertise in modelling long term effects of land use on C storage into the soils. Within this common project one major objective was to better understand the fate of plant litter entering the soil either as above litter or as root litter. The focus was put on two factors that particularly affect decomposition: the initial biochemical quality of plant litter, and the location of the decomposing litter. One innovative aspect of the project was the use of stable isotope as {sup 13}C for carbon, based on the use of enriched or depleted {sup 13}C material, the only option to assess the dynamics of 'new' C entering the soil on the short term, in order to reveal the effects of decomposition factors. Another aspect was the simultaneous study of C and N. The project consisted in experiments relevant for each agro-ecosystem, in forest, grassland and arable soils for which interactions between residue quality and nitrogen availability on the one hand, residue quality and location on the other hand, was investigated. A common experiment was set up to investigate the potential degradability of the various residue used (beech leaf rape straw, young rye, Lolium and dactylic roots) in a their original soils and in a single soil was assessed. Based on

  13. Application des techniques de diffusion de la lumière des rayons x et des neutrons à l'étude des systèmes colloïdaux. Deuxième partie : étude des différents systèmes : polymères en solution à l'état solide, solutions micellaires, systèmes fractals Application of Light, X-Ray and Neutron Diffusion Techniques to the Study of Colloidal Systems. Part Two: Research on Different Systems: Polymers in Solution in the Solid State, Micellar Solutions, Fractals Systems

    Directory of Open Access Journals (Sweden)

    Espinat D.

    2006-11-01

    Full Text Available Cet article fait suite à la première partie (Revue Inst. Franç. du Pétrole, vol. 45, n°6, novembre-décembre 1990 concernant l'application des techniques de diffusion de la lumière, des rayons X et des neutrons à l'étude des systèmes colloïdaux et plus précisément à la présentation théorique des trois méthodes. L'objet de cette deuxième partie est la présentation non exhaustive de quelques domaines d'applications. Nous nous attacherons tout particulièrement à présenter les potentialités des méthodes pour la caractérisation de systèmes colloïdaux ou divisés rencontrés dans de nombreuses branches d'activité de l'industrie pétrolière. Nous aborderons dans une première partie les solutions polymériques et colloïdales. En particulier nous nous attarderons sur l'importance des techniques de diffusion pour la caractérisation des polymères en solution et des solutions micellaires. Nous verrons également quelles informations la diffusion centrale peut apporter sur la macrostructure des polymères cristallisés ou amorphes à l'état solide. De nombreux systèmes présentent une structure de type fractal ; après présentation de quelques exemples, nous montrerons que les méthodes de diffusion peuvent apporter certaines informations sur ces matériaux, notamment la dimension fractale. This article is the second one (the first one was published in Revue de l'Institut Français du Pétrole No. 6, NovemberDecember 1990 concerning the application of techniques of light scattering, X rays and neutrons to the analysis of colloidal systems and more specifically to the theoretical description of the three methods. The aim of this second part is to make a nonexhaustive description of several fields of applications. A special effort is made to describe the potential of these methods for characterizing colloidal or divided systems encountered in a great many activities involving the petroleum industry. The first part of this

  14. Soil organic carbon assessments in cropping systems using isotopic techniques

    Science.gov (United States)

    Martín De Dios Herrero, Juan; Cruz Colazo, Juan; Guzman, María Laura; Saenz, Claudio; Sager, Ricardo; Sakadevan, Karuppan

    2016-04-01

    Introduction of improved farming practices are important to address the challenges of agricultural production, food security, climate change and resource use efficiency. The integration of livestock with crops provides many benefits including: (1) resource conservation, (2) ecosystem services, (3) soil quality improvements, and (4) risk reduction through diversification of enterprises. Integrated crop livestock systems (ICLS) with the combination of no-tillage and pastures are useful practices to enhance soil organic carbon (SOC) compared with continuous cropping systems (CCS). In this study, the SOC and its fractions in two cropping systems namely (1) ICLS, and (2) CCS were evaluated in Southern Santa Fe Province in Argentina, and the use of delta carbon-13 technique and soil physical fractionation were evaluated to identify sources of SOC in these systems. Two farms inside the same soil cartographic unit and landscape position in the region were compared. The ICLS farm produces lucerne (Medicago sativa Merrill) and oat (Avena sativa L.) grazed by cattle alternatively with grain summer crops sequence of soybean (Glicine max L.) and corn (Zea mays L.), and the farm under continuous cropping system (CCS) produces soybean and corn in a continuous sequence. The soil in the area is predominantly a Typic Hapludoll. Soil samples from 0-5 and 0-20 cm depths (n=4) after the harvest of grain crops were collected in each system and analyzed for total organic carbon (SOC, 0-2000 μm), particulate organic carbon (POC, 50-100 μm) and mineral organic carbon (MOC, is probably due to the presence of deep roots under pastures in ICLS. Delta carbon-13 values for 0-5 cm were -22.9, -21.2 and -19.9 per mil for REF, ICLS and CCS, respectively (Pis explained by the presence of tree species with high lignin content in natural vegetation. Lignin has lower delta carbon-13 compared to cellulose (dominating in crops and pastures), which is present in greater proportion in plant residues of

  15. Influence de la fertilisation à base des coques de cacao sur les ...

    African Journals Online (AJOL)

    SARAH

    31 oct. 2014 ... suspension de sol dans l'eau et dans une solution normale de ... Figure 5 : Évolution des indices de vigueur moyens des plants de maïs, en fonction des doses de carbone et du ..... Qualité des sols en zone de savane.

  16. Thermal conductivity of carbon felts, insulating materials with a high anisotropy; Conductivite thermique des feutres de carbone, isolants a forte anisotropie

    Energy Technology Data Exchange (ETDEWEB)

    Danes, F.E.; Bardon, J.P. [Centre National de la Recherche Scientifique, 44 - Nantes (France). Lab. de Thermocinetique

    1996-12-31

    Because of their high temperature resistance, carbon felts are used as thermal insulating materials for high temperature applications. The aim of this paper is to present a model that allows to calculate the thermal conductivity of felt fibers taking into account their high anisotropy and the contact resistance of fibers generated by the 3-D constriction phenomena which develop in fibers around each contact point. The study is divided in two parts: the first part concerns the bibliographic study of the different anisotropies of fibers and felts, while the second part presents the proposed conductivity model. (J.S.) 12 refs.

  17. Understanding Carbon Sequestration Options in the United States: Capabilities of a Carbon Management Geographic Information System

    Energy Technology Data Exchange (ETDEWEB)

    Dahowski, Robert T.; Dooley, James J.; Brown, Daryl R.; Mizoguchi, Akiyoshi; Shiozaki, Mai

    2001-04-03

    While one can discuss various sequestration options at a national or global level, the actual carbon management approach is highly site specific. In response to the need for a better understanding of carbon management options, Battelle in collaboration with Mitsubishi Corporation, has developed a state-of-the-art Geographic Information System (GIS) focused on carbon capture and sequestration opportunities in the United States. The GIS system contains information (e.g., fuel type, location, vintage, ownership, rated capacity) on all fossil-fired generation capacity in the Untied States with a rated capacity of at least 100 MW. There are also data on other CO2 sources (i.e., natural domes, gas processing plants, etc.) and associated pipelines currently serving enhanced oil recovery (EOR) projects. Data on current and prospective CO2 EOR projects include location, operator, reservoir and oil characteristics, production, and CO2 source. The system also contains information on priority deep saline aquifers and coal bed methane basins with potential for sequestering CO2. The GIS application not only enables data storage, flexible map making, and visualization capabilities, but also facilitates the spatial analyses required to solve complex linking of CO2 sources with appropriate and cost-effective sinks. A variety of screening criteria (spatial, geophysical, and economic) can be employed to identify sources and sinks most likely amenable to deployment of carbon capture and sequestration systems. The system is easily updateable, allowing it to stay on the leading edge of capture and sequestration technology as well as the ever-changing business landscape. Our paper and presentation will describe the development of this GIS and demonstrate its uses for carbon management analysis.

  18. A Low Carbon EU Energy System and Unconventional Sources

    International Nuclear Information System (INIS)

    Gracceva, F.; Kanudia, A.; Tosato, GC.

    2013-01-01

    The paper investigates the potential role of unconventional fossil fuels in a global low carbon energy system. Making use of a systemic approach, the paper presents an original application of a global partial equilibrium energy system model (TIAM-JET). In order to give a worldwide perspective with higher detail on European energy systems, the model links a set of extra-European macro-regions to the 30 European countries. First, a review of the most recent estimates of the available stocks of unconventional hydrocarbon resources is used to build the set of assumption for the scenario analysis. Secondly, a set of scenarios assuming different availability and cost of unconventional fuels are added to both a Current Trend scenario and a Carbon Constrained (CC) scenario, to explore the perspectives of unconventional gas and oil in a scenario halving CO 2 emissions by 2050, which is consistent with a 2 degree temperature increase. The results show if/how unconventional sources can contribute to the robustness of the European energy system with respect to the stress of a strong carbon constraint. We define this robustness as the capacity of the energy system to adapt its evolution to long-term constraints and keep delivering energy services to end users. In our approach robustness represents the long-term dimension of energy security. Assessing this ''system property'' requires analysing the wide range of factors that can exercise a stabilizing influence on the energy services delivery system, together with their relations, actual interactions and synergies. The energy system approach used for the analysis seeks to take into account as much of this complexity as possible. We assess the robustness of the EU system to the carbon constraint by looking at how the CC scenario affects energy system costs and energy prices under scenarios with different deployment of unconventional sources. This provides insights on the synergies and/or trade-offs between energy security and

  19. New developments of the KOMPOFERM {sup registered} system. Lean gas management, SMARTFERM, double membrane roof; Neue Entwicklungen des KOMPOFERM {sup registered} -Systems. Schwachgasmanagement, SMARTFERM, Doppelmembrandach

    Energy Technology Data Exchange (ETDEWEB)

    Striewski, Sandra [KOMPOTEC Kompostierungsanlagen GmbH, Nieheim (Germany)

    2012-11-01

    The KOMPOFERM {sup registered} dry fermentation process is a mesophilic batch process for biogas production from solid biomass. The system is developed continuously for higher economic efficiency, emission reduction and environmental protection. The contribution describes the optimisations of the KOMPOFERM {sup registered} system and presents examples of its practical implementation, e.g. thermophilic process control, the KOMPOFERM {sup registered} double membrane roof for optimum gas utilisation and reduction of the lean gas volume, the KOMPOFERM {sup registered} plus process with a percolate fermenter below the fermenter tunnels, the automatic feeding system for the rotting and/or fermenter tunnels and SMARTFERM, the dry fermentation module for plants up to 4m000 Mg input. (org.) [German] Als mesophiles Batchverfahren hat sich das KOMPOFERM {sup registered} -Trockenvergaerungsverfahren zur Erzeugung von Biogas aus fester Biomasse am Markt etabliert. Das System wird stetig weiterentwickelt, um die Wirtschaftlichkeit wie auch den Emissions- und Umweltschutz der Anlagen zu verbessern. Die Optimierungen des KOMPOFERM {sup registered} -Systems werden in diesem Artikel erlaeutert und Beispiele fuer deren praktische Umsetzung gegeben, wie die thermophile Prozessfuehrung des Systems, das KOMPOFERM {sup registered} -Doppelmembrandach zur optimalen Gasnutzung und Reduzierung von Schwachgas, das KOMPOFERM {sup registered} plus-Verfahren mit einem Perkolatfermenter unterhalb der Fermentertunnel, das automatische Eintragungsgeraet fuer Rotte- und/oder Fermentertunnel sowie SMARTFERM, das Trockenfermentationsmodul fuer Anlagen bis 4.000 Mg Input. (org.)

  20. Intercomparison of terrestrial carbon fluxes and carbon use efficiency simulated by CMIP5 Earth System Models

    Science.gov (United States)

    Kim, Dongmin; Lee, Myong-In; Jeong, Su-Jong; Im, Jungho; Cha, Dong Hyun; Lee, Sanggyun

    2017-12-01

    This study compares historical simulations of the terrestrial carbon cycle produced by 10 Earth System Models (ESMs) that participated in the fifth phase of the Coupled Model Intercomparison Project (CMIP5). Using MODIS satellite estimates, this study validates the simulation of gross primary production (GPP), net primary production (NPP), and carbon use efficiency (CUE), which depend on plant function types (PFTs). The models show noticeable deficiencies compared to the MODIS data in the simulation of the spatial patterns of GPP and NPP and large differences among the simulations, although the multi-model ensemble (MME) mean provides a realistic global mean value and spatial distributions. The larger model spreads in GPP and NPP compared to those of surface temperature and precipitation suggest that the differences among simulations in terms of the terrestrial carbon cycle are largely due to uncertainties in the parameterization of terrestrial carbon fluxes by vegetation. The models also exhibit large spatial differences in their simulated CUE values and at locations where the dominant PFT changes, primarily due to differences in the parameterizations. While the MME-simulated CUE values show a strong dependence on surface temperatures, the observed CUE values from MODIS show greater complexity, as well as non-linear sensitivity. This leads to the overall underestimation of CUE using most of the PFTs incorporated into current ESMs. The results of this comparison suggest that more careful and extensive validation is needed to improve the terrestrial carbon cycle in terms of ecosystem-level processes.

  1. Low-Carbon Economic Dispatching for Power Grid Integrated with Carbon Capture Power Plants and Wind Power System

    Directory of Open Access Journals (Sweden)

    Sheng Siqing

    2015-01-01

    Full Text Available Carbon emission characteristics of all kinds of power units are analyzed against the background of the low carbon economy. This paper introduces carbon trading in the dispatching model, gives full consideration to the benefit or cost of carbon emission and introduces carbon emission in the dispatching model as a decision variable so as to achieve the unity of the economy and the environmental protection of the dispatching model. A low carbon economic dispatching model is established based on multiple objectives, such as the lowest thermal power generation cost, the lowest carbon trading cost and the lowest carbon capture power plant operation cost. Load equalization, output constraint of power unit, ramping constraint, spinning reserve constraint and carbon capture efficiency constraint should be taken into account in terms of constraint conditions. The model is solved by the particle swarm optimization based on dynamic exchange and density distance. The fact that the introduction of carbon trading can effectively reduce the level of carbon emission and increase the acceptance level of wind power is highlighted through the comparison of the results of three models’ computational examples. With the carbon trading mechanism, carbon capture power plants with new technologies are able to give full play to the advantage of reducing carbon emission and wind curtailment so as to promote the development of the energy conservation and emission reduction technology and reduce the total cost of the dispatching system.

  2. Study of the damaging mechanisms of a copper / carbon - carbon composite under thermomechanical loading; Etude des mecanismes d'endommagement d'un assemblage cuivre / composite carbone - carbone sous chargement thermomecanique

    Energy Technology Data Exchange (ETDEWEB)

    Moncel, L

    1999-06-18

    The purpose of this work is to understand and to identify the damaging mechanisms of Carbon-Carbon composite bonded to copper under thermomechanical loading. The study of the composite allowed the development of non-linear models. These ones have been introduced in the finite elements analysis code named CASTEM2000. They have been validated according to a correlation between simulation and mechanical tests on multi-material samples. These tests have also permitted us to better understand the behaviour of the bonding between composite and copper (damaging and fracture modes for different temperatures) under shear and tensile loadings. The damaging mechanisms of the bond under thermomechanical loading have been studied and identified according to microscopic observations on mock-ups which have sustained thermal cycling tests: some cracks appear in the composite, near the bond between the composite and the copper. The correlation between numerical and experimental results have been improved because of the reliability of the composite modelization, the use of residual stresses and the results of the bond mechanical characterization. (author)

  3. Study of the damaging mechanisms of a carbon - carbon composite bonded to copper under thermomechanical loading; Etude des mecanismes d'endommagement d'un assemblage cuivre / composite carbone - carbone sous chargement thermomecanique

    Energy Technology Data Exchange (ETDEWEB)

    Moncel, L

    1999-06-15

    The purpose of this work is to understand and to identify the damaging mechanisms of Carbon-Carbon composite bonded to copper under thermomechanical loading. The study of the composite allowed the development of non-linear models. These ones have been introduced in the finite elements analysis code named CASTEM 2000. They have been validated according to a correlation between simulation and mechanical tests on multi-material samples. These tests have also permitted us to better understand the behaviour of the bonding between composite and copper (damaging and fracture modes for different temperatures) under shear and tensile loadings. The damaging mechanisms of the bond under thermomechanical loading have been studied and identified according to microscopic observations on mock-ups which have sustained thermal cycling tests: some cracks appear in the composite, near the bond between the composite and the copper. The correlation between numerical and experimental results have been improved because of the reliability of the composite modelization, the use of residual stresses and the results of the bond mechanical characterisation. (author)

  4. Carbon microelectromechanical systems (C-MEMS) based microsupercapacitors

    KAUST Repository

    Agrawal, Richa

    2015-05-18

    The rapid development in miniaturized electronic devices has led to an ever increasing demand for high-performance rechargeable micropower scources. Microsupercapacitors in particular have gained much attention in recent years owing to their ability to provide high pulse power while maintaining long cycle lives. Carbon microelectromechanical systems (C-MEMS) is a powerful approach to fabricate high aspect ratio carbon microelectrode arrays, which has been proved to hold great promise as a platform for energy storage. C-MEMS is a versatile technique to create carbon structures by pyrolyzing a patterned photoresist. Furthermore, different active materials can be loaded onto these microelectrode platforms for further enhancement of the electrochemical performance of the C-MEMS platform. In this article, different techniques and methods in order to enhance C-MEMS based various electrochemical capacitor systems have been discussed, including electrochemical activation of C-MEMS structures for miniaturized supercapacitor applications, integration of carbon nanostructures like carbon nanotubes onto C-MEMS structures and also integration of pseudocapacitive materials such as polypyrrole onto C-MEMS structures. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

  5. Carbon microelectromechanical systems (C-MEMS) based microsupercapacitors

    KAUST Repository

    Agrawal, Richa; Beidaghi, Majid; Chen, Wei; Wang, Chunlei

    2015-01-01

    The rapid development in miniaturized electronic devices has led to an ever increasing demand for high-performance rechargeable micropower scources. Microsupercapacitors in particular have gained much attention in recent years owing to their ability to provide high pulse power while maintaining long cycle lives. Carbon microelectromechanical systems (C-MEMS) is a powerful approach to fabricate high aspect ratio carbon microelectrode arrays, which has been proved to hold great promise as a platform for energy storage. C-MEMS is a versatile technique to create carbon structures by pyrolyzing a patterned photoresist. Furthermore, different active materials can be loaded onto these microelectrode platforms for further enhancement of the electrochemical performance of the C-MEMS platform. In this article, different techniques and methods in order to enhance C-MEMS based various electrochemical capacitor systems have been discussed, including electrochemical activation of C-MEMS structures for miniaturized supercapacitor applications, integration of carbon nanostructures like carbon nanotubes onto C-MEMS structures and also integration of pseudocapacitive materials such as polypyrrole onto C-MEMS structures. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

  6. Fusion power in a future low carbon global electricity system

    DEFF Research Database (Denmark)

    Cabal, H.; Lechón, Y.; Bustreo, C.

    2017-01-01

    Fusion is one of the technologies that may contribute to a future, low carbon, global energy supply system. In this article we investigate the role that it may play under different scenarios. The global energy model ETM (originally EFDA TIMES Model) has been used to analyse the participation...

  7. Carbon dioxide angiography: a simple and safe system of delivery

    International Nuclear Information System (INIS)

    Cronin, P.; Patel, J.V.; Kessel, D.O.; Robertson, I.; McPherson, S.J.

    2005-01-01

    Carbon dioxide (CO 2 ) is an established alternate angiographic contrast agent, which can be delivered by pump or hand injection. We describe a simple, safe and inexpensive hand injection system that delivers a known volume of CO 2 at atmospheric pressure and prevents contamination with room air

  8. 46 CFR 169.565 - Fixed carbon dioxide system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Fixed carbon dioxide system. 169.565 Section 169.565 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS... cylinder storage area must be properly ventilated and the temperature inside must not exceed 130 °F. (g...

  9. Storing in carbon nano structures for hybrid systems solar hydrogen

    International Nuclear Information System (INIS)

    Marazzi, R.; Zini, G.; Tartarini, P.

    2009-01-01

    We have developed a hybrid energy system for converting energy from renewable sources and its storage in the form of hydrogen. The storage uses activated carbon and the methodology was modelled mathematically and simulated in numerical software. The results show that storage compression is cheaper storage for liquefaction. [it

  10. Review of Fusion Systems and Contributing Technologies for SIHS-TD (Examen des Systemes de Fusion et des Technologies d'Appui pour la DT SIHS)

    National Research Council Canada - National Science Library

    Angel, Harry H; Ste-Croix, Chris; Kittel, Elizabeth

    2007-01-01

    The major objectives of the report were to identify and review the field of image fusion and contributing technologies and to recommend systems, algorithms and metrics for the proposed SIHS TD Vision SST fusion test bed...

  11. System Identification for Integrated Aircraft Development and Flight Testing (l’Identification des systemes pour le developpement integre des aeronefs et les essais en vol)

    Science.gov (United States)

    1999-03-01

    aerodynamics to affect load motions. The effects include a load trail angle in proportion to the drag specific force, and modification of the load pendulum...equations algorithm for flight data filtering architeture . and data consistency checking; and SCIDNT 8, an output architecture. error identification...accelerations at the seven sensor locations, identified system is proportional to the number When system identification is performed, as of flexible modes

  12. Carbon dioxide reduction in a tubular solid oxide electrolysis cell for a carbon recycling energy system

    Energy Technology Data Exchange (ETDEWEB)

    Dipu, Arnoldus Lambertus, E-mail: dipu.a.aa@m.titech.ac.jp [Department of Nuclear Engineering, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550 (Japan); Ujisawa, Yutaka [Nippon Steel and Sumitomo Metal Corporation, 16-1, Sunayama, Kamisu, Ibaraki 314-0255 (Japan); Ryu, Junichi; Kato, Yukitaka [Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology, 2-12-1-N1-22, Ookayama, Meguro-ku, Tokyo 152-8550 (Japan)

    2014-05-01

    A new energy transformation system based on carbon recycling is proposed called the active carbon recycling energy system (ACRES). A high-temperature gas reactor was used as the main energy source for ACRES. An experimental study based on the ACRES concept of carbon monoxide (CO) regeneration via high-temperature reduction of carbon dioxide (CO{sub 2}) was carried out using a tubular solid oxide electrolysis cell employing Ni-LSM cermet|YSZ|YSZ-LSM as the cathode|electrolyte|anode. The current density increased with increasing CO{sub 2} concentration at the cathode, which was attributed to a decrease in cathode activation and concentration overpotential. Current density, as well as the CO and oxygen (O{sub 2}) production rates, increased with increasing operating temperature. The highest CO and O{sub 2} production rates of 1.24 and 0.64 μmol/min cm{sup 2}, respectively, were measured at 900 °C. Based on the electrolytic characteristics of the cell, the scale of a combined ACRES CO{sub 2} electrolysis/iron production facility was estimated.

  13. The Role of Carbon Accountant in Corporate Carbon Management Systems: A Holistic Approach

    Directory of Open Access Journals (Sweden)

    Francis Chinedu Egbunike

    2017-12-01

    Full Text Available Carbon accounting consists of a combination of advanced cost allocation techniques such as activity-based management and life-cycle costing; that improve the identification and assignments of carbon-related expenses and overheads to such objects as products, services, customers and organizational processes. The study therefore sets out to find the role of carbon accountant in corporate management systems. Data used for this investigation were collected from primary and secondary sources. Primary data are first-hand information from respondents while Secondary data include textbook, Annual Reports and financial statements and internet facilities. The study employed descriptive survey and ex-post facto research design and the formulated hypotheses were tested by use of T-Test and OLS Regression. Based on the analysis and the hypothesis tested, it showed that there is a statistically significant relationship between carbon accounting and corporate performance of selected quoted Manufacturing Companies and based on this findings, it was recommended amongst others that, adaptation to conditions that include long-term changing dynamics of the natural environment should be encouraged and the focus of finance and accounting system should not only cover short-term outcomes and management of short-term costing, reporting and disclosure but also long-term climate risks.

  14. Evaluating Carbonate System Algorithms in a Nearshore System: Does Total Alkalinity Matter?

    Science.gov (United States)

    Jones, Jonathan M; Sweet, Julia; Brzezinski, Mark A; McNair, Heather M; Passow, Uta

    2016-01-01

    Ocean acidification is a threat to many marine organisms, especially those that use calcium carbonate to form their shells and skeletons. The ability to accurately measure the carbonate system is the first step in characterizing the drivers behind this threat. Due to logistical realities, regular carbonate system sampling is not possible in many nearshore ocean habitats, particularly in remote, difficult-to-access locations. The ability to autonomously measure the carbonate system in situ relieves many of the logistical challenges; however, it is not always possible to measure the two required carbonate parameters autonomously. Observed relationships between sea surface salinity and total alkalinity can frequently provide a second carbonate parameter thus allowing for the calculation of the entire carbonate system. Here, we assessed the rigor of estimating total alkalinity from salinity at a depth sampling water from a pier in southern California for several carbonate system parameters. Carbonate system parameters based on measured values were compared with those based on estimated TA values. Total alkalinity was not predictable from salinity or from a combination of salinity and temperature at this site. However, dissolved inorganic carbon and the calcium carbonate saturation state of these nearshore surface waters could both be estimated within on average 5% of measured values using measured pH and salinity-derived or regionally averaged total alkalinity. Thus we find that the autonomous measurement of pH and salinity can be used to monitor trends in coastal changes in DIC and saturation state and be a useful method for high-frequency, long-term monitoring of ocean acidification.

  15. Mobility and availability of PAH in soil-sewage sludges systems; Mobilite et disponibilite des HAP dans des systemes terre-boue de station d'epuration

    Energy Technology Data Exchange (ETDEWEB)

    Bryselbout, C

    2002-07-15

    This work deals with the increase of the availability of polycyclic aromatic hydrocarbons (PAH) induced by the supply of organic matter to a soil in the framework of the agricultural valorization of organic wastes. The sharing of PAH with the organic matter of a model of soil and sewage sludge mixture has been studied first, using extractions and adsorption kinetics (Kd methanol). Then, the evolution of the PAH availability in a sludge-earth mixture has ben studied over a period of 185 days. Finally, the plants PAH availability in the presence of residual sludge has been studied at the laboratory and in-situ. Results show that Kd methanol and PAH extractability in a earth-sludge mixture are proportional to the total organic carbon ratio and to the incubation time. The presence of sludges leads to the immobilization of a smaller amount of PAH. The PAH availability from a sludge-earth mixture is limited by the presence of sludge and cations, such as mercuric mercury. It seems that the organic matter of sludges is more washable than the one of the soil leading to an increased risk of migration of micro-pollutants in the environment. The agricultural valorization of organic wastes, as it is already implemented in France, does not indicate any direct effect on the mobility and availability of PAH in soils. However, a long-term effect on water and soil quality is to be feared. The limitation of PAH fluxes towards agricultural areas would be a societal answer. (J.S.)

  16. Mobility and availability of PAH in soil-sewage sludges systems; Mobilite et disponibilite des HAP dans des systemes terre-boue de station d'epuration

    Energy Technology Data Exchange (ETDEWEB)

    Bryselbout, C.

    2002-07-15

    This work deals with the increase of the availability of polycyclic aromatic hydrocarbons (PAH) induced by the supply of organic matter to a soil in the framework of the agricultural valorization of organic wastes. The sharing of PAH with the organic matter of a model of soil and sewage sludge mixture has been studied first, using extractions and adsorption kinetics (Kd methanol). Then, the evolution of the PAH availability in a sludge-earth mixture has ben studied over a period of 185 days. Finally, the plants PAH availability in the presence of residual sludge has been studied at the laboratory and in-situ. Results show that Kd methanol and PAH extractability in a earth-sludge mixture are proportional to the total organic carbon ratio and to the incubation time. The presence of sludges leads to the immobilization of a smaller amount of PAH. The PAH availability from a sludge-earth mixture is limited by the presence of sludge and cations, such as mercuric mercury. It seems that the organic matter of sludges is more washable than the one of the soil leading to an increased risk of migration of micro-pollutants in the environment. The agricultural valorization of organic wastes, as it is already implemented in France, does not indicate any direct effect on the mobility and availability of PAH in soils. However, a long-term effect on water and soil quality is to be feared. The limitation of PAH fluxes towards agricultural areas would be a societal answer. (J.S.)

  17. K-intercalated carbon systems: Effects of dimensionality and substrate

    KAUST Repository

    Kaloni, Thaneshwor P.

    2012-06-01

    Density functional theory is employed to investigate the electronic properties of K-intercalated carbon systems. Young\\'s modulus indicates that the intercalation increases the intrinsic stiffness. For K-intercalated bilayer graphene on SiC(0001) the Dirac cone is maintained, whereas a trilayer configuration exhibits a small splitting at the Dirac point. Interestingly, in contrast to many other intercalated carbon systems, the presence of the SiC(0001) substrate does not suppress but rather enhances the charge carrier density. Reasonably high values are found for all systems, the highest carrier density for the bilayer. The band structure and electron-phonon coupling of free-standing K-intercalated bilayer graphene points to a high probability for superconductivity in this system. © 2012 Europhysics Letters Association.

  18. Méthodes de calcul pour la conception des systèmes de protection cathodique des structures longilignes Computing Methods for Designing Cathodic Protection Systemes for Elongate Stuctures

    Directory of Open Access Journals (Sweden)

    Roche M.

    2006-11-01

    Full Text Available Les différentes structures longilignes qu'utilise l'industrie des hydrocarbures sont, dans la plupart des cas, soumises à un système de protection cathodique par anodes sacrificielles ou par courant imposé. La conception de ces systèmes doit être basée sur l'étude de la variation du potentiel et de l'intensité le long de la structure causée par la chute ohmique. La méthode classique de calcul résoud couramment le cas des structures longilignes à diamètre constant traversant un terrain dont la résistivité est considérée comme constante sur toute la longueur. Dans le cas où la constitution de la structure varie, comme celui des casings de puits de forage, ou quand celle-ci traverse plusieurs types de terrain, le problème se complique. Nous proposons une méthode générale permettant de traiter rapidement tout problème de ce type, le nombre de tronçons n'étant pas limité. Cette méthode fait appel à des notions de facteur de réflexion et de résistance équivalente déjà exposées dans la littérature mais dont l'usage ne semble pas s'être répandu. The different elongate structures used by the hydrocarbon industry are, in most cases, subjected ta a cathodic protection system consisting of sacrificial anodes or an impressed current. Desings of such systems must be boséd on an analysis of variations in the potential and intensity along the structure as the result of the ohm drop. The conventional computing method commonly solves cases of elongote structures with a constant diameter, running through ground whose resistivity is considéred to be constant over the entire length. When the~nake-up of the structure varies, as is the case for borehole casings, or when it goes through several types of formations, the problem gets more complicated. We propose a general method for quickly dealing with any problem of this type, with no limit ta the number of lengths involved. This method makes use of reflection factor and

  19. Endovascular vein harvest: systemic carbon dioxide absorption.

    Science.gov (United States)

    Maslow, Andrew M; Schwartz, Carl S; Bert, Arthur; Hurlburt, Peter; Gough, Jeffrey; Stearns, Gary; Singh, Arun K

    2006-06-01

    Endovascular vein harvest (EDVH) requires CO(2) insufflation to expand the subcutaneous space, allowing visualization and dissection of the saphenous vein. The purpose of this study was to assess the extent of CO(2) absorption during EDVH. Prospective observational study. Single tertiary care hospital. Sixty patients (30 EDVH and 30 open-vein harvest) undergoing isolated coronary artery bypass graft surgery. Hemodynamic, procedural, and laboratory data were collected prior to (baseline), during, and at it the conclusion (final) of vein harvesting. Data were also collected during cardiopulmonary bypass (CPB). Data were compared by using t tests, analysis of variance, and correlation statistics when needed. There were significant increases in arterial CO(2) (PaCO(2), 35%) and decreases in pH (1.35%) during EDVH. These were associated with increases in heart rate, mean blood pressure, and cardiac output. Within the EDVH group, greater elevations (>10 mmHg) in PaCO2 were more likely during difficult harvest procedures, and these patients exhibited greater increase in heart rate. Elevated CO(2) persisted during CPB, requiring higher systemic gas flows and greater use of phenylephrine to maintain desired hemodynamics. EDVH was associated with systemic absorption of CO(2). Greater absorption was more likely in difficult procedures and was associated with greater hemodynamic changes requiring medical therapy.

  20. Optimal management of the power distribution network. A novel network information system; Optimale Verwaltung des Versorgungsnetzes. Ein neues Netzinformationssystem

    Energy Technology Data Exchange (ETDEWEB)

    Kiesel, U. [HEW AG, Hamburg (Germany); Korri, P. [Tekla Qyj, Eschborn (Germany). Energieversorgung

    2000-12-01

    In June 200, the German electric utility Hamburgische Electricitaets-Werke AG (HEW) has bought and installed a high-performance, PC-based information system for all purposes of distribution network management tasks for their medium and low-voltage grids. The standard software Xpower of the Finnish software house Tekla Oyj has been streamlined with the requirements of the utility and is described with respect to the applications on site. (orig./CB) [German] Mit der Einfuehrung eines Netzinformationssystems (NIS) steht der Hamburgischen Electricitaets-Werke AG (HEW) seit Juni 2000 ein leistungsstarkes PC-basiertes Informationssystem zur Verfuegung, das langfristig die Projektierung und die Betriebsfuehrung der Mittel- und Niederspannungsnetze unterstuetzt und dokumentiert. Die Standardsoftware Xpower des finnischen Spezialisten Tekla Oyj wurde an die Anforderungen der HEW angepasst. (orig./CB)

  1. Carbon-13 NMR spectroscopy of biological systems

    CERN Document Server

    Beckmann, Nicolau

    1995-01-01

    This book is intended to provide an in-depth understanding of 13C NMR as a tool in biological research. 13C NMR has provided unique information concerning complex biological systems, from proteins and nucleic acids to animals and humans. The subjects addressed include multidimensional heteronuclear techniques for structural studies of molecules in the liquid and solid states, the investigation of interactions in model membranes, the elucidation of metabolic pathwaysin vitro and in vivo on animals, and noninvasive metabolic studies performed on humans. The book is a unique mix of NMR methods and biological applications which makes it a convenient reference for those interested in research in this interdisciplinary area of physics, chemistry, biology, and medicine.Key Features* An interdisciplinary text with emphasis on both 13C NMR methodology and the relevant biological and biomedical issues* State-of-the-art 13C NMR techniques are described; Whenever possible, their advantages over other approaches are empha...

  2. Carbon Dioxide Sequestering Using Microalgal Systems

    Energy Technology Data Exchange (ETDEWEB)

    Daniel J. Stepan; Richard E. Shockey; Thomas A. Moe; Ryan Dorn

    2002-02-01

    This project evaluated key design criteria, the technical feasibility, and the preliminary economic viability of a CO{sub 2}-sequestering system integrated with a coal-fired power plant based on microalgae biofixation. A review of relevant literature was conducted, and a bench-scale algal-based sequestration system was constructed and operated to verify algal growth capabilities using a simulated flue gas stream. The bench-scale system was a 20-gallon glass aquarium with a 16-gallon operating volume and was direct-sparged with a simulated flue gas. The flue gas composition was based on flue gas analyses for a 550-MW Coal Creek Power Station boiler in Underwood, North Dakota, which averaged 12.1% CO{sub 2}, 5.5% O{sub 2}, 423 ppm SO{sub 2}, 124 ppm NO{sub x}, and an estimated 50 mg/m{sup 3} fly ash loading. The algae were grown in Bold's basal growth medium. Lighting was provided using a two-tube fluorescent ''grow-light'' bulb fixture mounted directly above the tank. Algal growth appeared to be inhibited in the presence of SO{sub 2} using mixed cultures of green and blue-green cultures of algae. Samples of Monoraphidium strain MONOR02 and Nannochloropsis NANNO02 algal samples were obtained from the University of Hawaii Culture Collection. These samples did not exhibit inhibited growth in the presence of all the simulated flue gas constituents, but growth rates were somewhat lower than those expected, based on the review of literature. Samples of harvested algae were analyzed for protein, lipid, and carbohydrate content. A lipid content of 26% appeared to be fairly normal for algae, and it did not appear that large amounts of nitrogen were being fixed and promoting growth, nor were the algae starved for nitrogen. Proteins made up 41% of the total mass, and carbohydrates were assumed to be 33% (by difference). A preliminary economic analysis showed the costs of an integrated system based on microalgae biofixation to sequester 25% of the CO

  3. COCAP: a carbon dioxide analyser for small unmanned aircraft systems

    Science.gov (United States)

    Kunz, Martin; Lavric, Jost V.; Gerbig, Christoph; Tans, Pieter; Neff, Don; Hummelgård, Christine; Martin, Hans; Rödjegård, Henrik; Wrenger, Burkhard; Heimann, Martin

    2018-03-01

    Unmanned aircraft systems (UASs) could provide a cost-effective way to close gaps in the observation of the carbon cycle, provided that small yet accurate analysers are available. We have developed a COmpact Carbon dioxide analyser for Airborne Platforms (COCAP). The accuracy of COCAP's carbon dioxide (CO2) measurements is ensured by calibration in an environmental chamber, regular calibration in the field and by chemical drying of sampled air. In addition, the package contains a lightweight thermal stabilisation system that reduces the influence of ambient temperature changes on the CO2 sensor by 2 orders of magnitude. During validation of COCAP's CO2 measurements in simulated and real flights we found a measurement error of 1.2 µmol mol-1 or better with no indication of bias. COCAP is a self-contained package that has proven well suited for the operation on board small UASs. Besides carbon dioxide dry air mole fraction it also measures air temperature, humidity and pressure. We describe the measurement system and our calibration strategy in detail to support others in tapping the potential of UASs for atmospheric trace gas measurements.

  4. Enhanced Performance Assessment System (EPAS) for carbon sequestration.

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yifeng; Sun, Amy Cha-Tien; McNeish, Jerry A. (Sandia National Laboratories, Livermore, CA); Dewers, Thomas A.; Hadgu, Teklu; Jove-Colon, Carlos F.

    2010-09-01

    Carbon capture and sequestration (CCS) is an option to mitigate impacts of atmospheric carbon emission. Numerous factors are important in determining the overall effectiveness of long-term geologic storage of carbon, including leakage rates, volume of storage available, and system costs. Recent efforts have been made to apply an existing probabilistic performance assessment (PA) methodology developed for deep nuclear waste geologic repositories to evaluate the effectiveness of subsurface carbon storage (Viswanathan et al., 2008; Stauffer et al., 2009). However, to address the most pressing management, regulatory, and scientific concerns with subsurface carbon storage (CS), the existing PA methodology and tools must be enhanced and upgraded. For example, in the evaluation of a nuclear waste repository, a PA model is essentially a forward model that samples input parameters and runs multiple realizations to estimate future consequences and determine important parameters driving the system performance. In the CS evaluation, however, a PA model must be able to run both forward and inverse calculations to support optimization of CO{sub 2} injection and real-time site monitoring as an integral part of the system design and operation. The monitoring data must be continually fused into the PA model through model inversion and parameter estimation. Model calculations will in turn guide the design of optimal monitoring and carbon-injection strategies (e.g., in terms of monitoring techniques, locations, and time intervals). Under the support of Laboratory-Directed Research & Development (LDRD), a late-start LDRD project was initiated in June of Fiscal Year 2010 to explore the concept of an enhanced performance assessment system (EPAS) for carbon sequestration and storage. In spite of the tight time constraints, significant progress has been made on the project: (1) Following the general PA methodology, a preliminary Feature, Event, and Process (FEP) analysis was performed for

  5. The Reactions of Hot Fluorine-18 with Gaseous Carbon Tetrafluoride; Reactions des Atomes {sup 18}F Chauds avec le Tetrafluorure de Carbone en Phase Gazeuse; Reaktsii goryachikh atomov ftora-18 s gazovoj fazoj tetraftormetana; Reacciones de Atomos Calientes de Fluor-18 con Tetrafluoruro de Carbono Gaseoso

    Energy Technology Data Exchange (ETDEWEB)

    Colebourne, N.; Todd, J. F.J.; Wolfgang, R. [Yale University, New Haven, CT (United States)

    1965-04-15

    Studies on the reactions of hot Fie atoms with carbon tetrafluoride are reported. Gaseous samples were exposed to the 40-60 MeV (maximum) bremsstrahlung beam of the Yale University Electron Accelerator. The F{sup 19} ({gamma}, n) F{sup 18} process produces F{sup 18} with a kinetic energy of the order of 10{sup 5}-10{sup 6} eV. These species lose energy by collision and are expected to reach the ''chemical'' energy range (< 100 eV) as ground state atoms. Ethylene was found to be a good scavenger for thermal F{sup 18} atoms. Analysis of products was made using standard radio-gas chromatography techniques. The system was found to be quite sensitive to extraneous radiation damage effects and appropriate precautions were taken. Hot displacement reactions, similar to those observed for hot hydrogen, but much less efficient, were found: F{sup 18} + CF{sup 4} --> CF{sub 3}F{sup 18} + F, F{sup 18} +CF{sub 4} --> CF{sub 2}F{sup 18} + (F + F), It was impossible to study the abstraction reaction F{sup 18} + CF{sub 4} --> CF{sub 3} + FF{sup 18} directly. However, indirect evidence suggests that it also has a low efficiency. Detailed studies of the effect of moderator on the F{sup 18} + CF{sub 4} system have been made. The data obtained were analysed by means of the kinetic theory of hot reactions. The system was found to be in accord with this formalism, providing quantitative confirmation of the present interpretation of the results. The carbon tetrafluoride and methane systems provide a basis for some tentative conclusions on the mechanisms of hot fluorine atom reactions. At present it appears that with certain important, but natural, modifications the model first developed for hot hydrogen atoms is applicable [French] Le memoire est consacre a des etudes sur les reactions des atomes {sup 18}F chauds avec le tetrafluorure de carbone. Des echantillons gazeux ont ete exposes a un faisceau de rayonnements de freinage de 40 a 60 MeV (maximum) emis par l'accelerateur d

  6. Research trends in radiobiology since 40 years. a new approach: the enzymatic repair function of DNA, internal factor in evolution of biological systems under irradiation; Etude des tendances des recherches en radiologie depuis 40 ans. Une nouvelle voie de recherche: la fonction de reparation enzymatique de l'ADN, facteur interne d'evolution des systemes biologiques sous rayonnement

    Energy Technology Data Exchange (ETDEWEB)

    Mouton, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    In the first part of the report, the author attempts to draw an historical scheme of successive research working hypotheses in radiobiology since 1924. Less than a generation ago the effect of radiation exposure were viewed as being direct, immediate, irreparable and unmodifiable. Now it is generally accepted that radiation lesion can also be indirect, delayed, reparable and often modified with appropriate chemical or biochemical treatment. It was however in 1962-1964 that came the decisive breakthrough in radiobiology with the discovery that the cell possesses a natural active self-defense mechanism against whatever stress would affect the integrity of the genetic message contained in the DNA structure itself. The existence of what could be considered as a fourth DNA function i.e. self-repair by enzymatic action under genetic control-brings at least to radiobiology the missing molecular biology basis it needed to get out of its 'phenomenological night' after abandon of the generalization of Lea's theory through lack of experimental evidence. In the second part, which is a prospective one, the author tries to set an enlarged synthesis considering the possible role of DNA repair system not only in cell survival - in presence or absence of dose modifiers or mutagens - but also in the artificial and natural evolution of biological system exposed to sub-lethal doses of radiation. Most recent data from the literature fit well with what must be still considered as a general working hypothesis. Studies dealing with phenotypic and genotypic characters linked with the acquisition of gamma and UV radiation resistance in 'Escherichia coli K12' has been started by the author, in collaboration with O. Tremeau, in order to bring a new experimental contribution in this respect. (author) [French] Dans la premiere partie, l'auteur tente de retracer l'historique des hypotheses successives qui ont jalonne les avances de la radiobiologie depuis 1924. Il y a moins d'une generation, l

  7. Methods of analyzing carbon nanostructures, methods of preparation of analytes from carbon nanostructures, and systems for analyzing carbon nanostructures

    KAUST Repository

    Da Costa, Pedro Miquel Ferreira Joaquim

    2016-09-09

    Provided herein is a method determining the concentration of impurities in a carbon material, comprising: mixing a flux and a carbon material to form a mixture, wherein the carbon material is selected from the group consisting of graphene, carbon nanotubes, fullerene, carbon onions, graphite, carbon fibers, and a combination thereof; heating the mixture using microwave energy to form fused materials; dissolution of the fused materials in an acid mixture; and measuring the concentration of one or more impurities.

  8. Examination of GyE system for HIMAC carbon therapy

    International Nuclear Information System (INIS)

    Kanai, Tatsuaki; Matsufuji, Naruhiro; Miyamoto, Tadaaki; Mizoe, Junetsu; Kamada, Tadashi; Tsuji, Hiroshi; Kato, Hirotoshi; Baba, Masayuki; Tsujii, Hirohiko

    2006-01-01

    Purpose: A retrospective analysis was made to examine appropriateness in the estimation of the biologic effectiveness of carbon-ion radiotherapy using resultant data from clinical trials at the heavy-ion medical accelerator complex (HIMAC) at the National Institute of Radiological Sciences in Chiba, Japan. Methods and Materials: At HIMAC, relative biologic effectiveness (RBE) values of therapeutic carbon beams were determined based on experimental results of cell responses, on values expected with the linear-quadratic model, and based on experiences with neutron therapy. We use fixed RBE values independent of dose levels, although this apparently contradicts radiobiologic observations. Our RBE system depends only on LET of the heavy-ion radiation fields. With this RBE system, over 2,000 patients have been treated by carbon beams. With data from these patients, the local control rate of non-small-cell lung cancer was analyzed to verify the clinical RBE of the carbon beam. The local control rate was compared with rates published by groups from Gunma University and Massachusetts General Hospital. Using a simplified tumor control probability (TCP) model, clinical RBE values were obtained for different levels of TCP. Results: For the 50% level of the clinical TCP, the RBE values nearly coincide with those for in vitro human salivary gland cell survival at 10%. For the higher levels of clinical TCP, the RBE values approach closer to those adapted in clinical trials at HIMAC

  9. Carbon footprint of construction using industrialised building system

    Science.gov (United States)

    Lim, P. Y.; Yahya, K.; Aminudin, E.; Zakaria, R.; Haron, Z.; Mohamad Zin, R.; Redzuan, A. A. H.

    2017-11-01

    Industrialised Building System (IBS) is more sustainable to the environment as compared to the conventional construction methods. However, the construction industry in Malaysia has low acceptance towards IBS due to the resistance to change and also lack of awareness towards sustainability development. Therefore, it is important to study the amount carbon footprint produced by IBS during its manufacturing and construction stage, and also the amount of carbon footprint produced by one meter square of gross floor area of IBS construction using Life Cycle Assessment (LCA) to ease future research through the comparison of the carbon footprint of IBS with the conventional building system. As a result, a case study on a residential type of construction in the vicinity of Johor Bahru, Malaysia was carried out to obtain the necessary data and result. From the data analysis, the amount of greenhouse gases (GHG) for a residential type IBS construction based on the raw materials and resources involved to manufacture and construct IBS components is 0.127 tonnes fossil CO2Eq per meter square. Raw material that contributed to the most amount of carbon footprint is Ordinary Portland Cement (OPC), followed by steel bars, autoclaved aerated blocks and diesel. The LCA data acquired will be very useful in implementing IBS in the residential type construction. As a result, the awareness towards sustainable construction using IBS can be improved.

  10. System-Level Design Considerations for Carbon Nanotube Electromechanical Resonators

    Directory of Open Access Journals (Sweden)

    Christian Kauth

    2013-01-01

    Full Text Available Despite an evermore complete plethora of complex domain-specific semiempirical models, no succinct recipe for large-scale carbon nanotube electromechanical systems design has been formulated. To combine the benefits of these highly sensitive miniaturized mechanical sensors with the vast functionalities available in electronics, we identify a reduced key parameter set of carbon nanotube properties, nanoelectromechanical system design, and operation that steers the sensor’s performance towards system applications, based on open- and closed-loop topologies. Suspended single-walled carbon nanotubes are reviewed in terms of their electromechanical properties with the objective of evaluating orders of magnitude of the electrical actuation and detection mechanisms. Open-loop time-averaging and 1ω or 2ω mixing methods are completed by a new 4ω actuation and detection technique. A discussion on their extension to closed-loop topologies and system applications concludes the analysis, covering signal-to-noise ratio, and the capability to spectrally isolate the motional information from parasitical feedthrough by contemporary electronic read-out techniques.

  11. Carbon footprint and ammonia emissions of California beef production systems.

    Science.gov (United States)

    Stackhouse-Lawson, K R; Rotz, C A; Oltjen, J W; Mitloehner, F M

    2012-12-01

    Beef production is a recognized source of greenhouse gas (GHG) and ammonia (NH(3)) emissions; however, little information exists on the net emissions from beef production systems. A partial life cycle assessment (LCA) was conducted using the Integrated Farm System Model (IFSM) to estimate GHG and NH(3) emissions from representative beef production systems in California. The IFSM is a process-level farm model that simulates crop growth, feed production and use, animal growth, and the return of manure nutrients back to the land to predict the environmental impacts and economics of production systems. Ammonia emissions are determined by summing the emissions from animal housing facilities, manure storage, field applied manure, and direct deposits of manure on pasture and rangeland. All important sources and sinks of methane, nitrous oxide, and carbon dioxide are predicted from primary and secondary emission sources. Primary sources include enteric fermentation, manure, cropland used in feed production, and fuel combustion. Secondary emissions occur during the production of resources used on the farm, which include fuel, electricity, machinery, fertilizer, and purchased animals. The carbon footprint is the net exchange of all GHG in carbon dioxide equivalent (CO(2)e) units per kg of HCW produced. Simulated beef production systems included cow-calf, stocker, and feedlot phases for the traditional British beef breeds and calf ranch and feedlot phases for Holstein steers. An evaluation of differing production management strategies resulted in ammonia emissions ranging from 98 ± 13 to 141 ± 27 g/kg HCW and carbon footprints of 10.7 ± 1.4 to 22.6 ± 2.0 kg CO(2)e/kg HCW. Within the British beef production cycle, the cow-calf phase was responsible for 69 to 72% of total GHG emissions with 17 to 27% from feedlot sources. Holstein steers that entered the beef production system as a by-product of dairy production had the lowest carbon footprint because the emissions

  12. The uranium-carbon and plutonium-carbon systems. A thermochemical assessment

    International Nuclear Information System (INIS)

    1963-01-01

    A fair amount of thermochemical data has been accumulated on the compounds in the uranium-carbon system. The main difficulties involved appear to be the sluggishness of the reaction of these carbides and the lack of information on the true equilibrium diagram. The information assessed in this report is accurate to, say ± 5 kcal on the average. This is in fact satisfactory for quite a number of calculations of equilibria involving uranium and carbon. It is not accurate enough for more ambitious calculations such as that of the equilibrium diagram. Present assessment has also made clear the gaps that still exist. It appears that it is mainly the non-stoichiometric parts of the diagram that need extensive further studies; this would also assist in increasing the accuracy of the known data. 66 refs, 6 figs, 15 tabs

  13. Impact test characterization of carbon-carbon composites for the thermoelectric space power system

    International Nuclear Information System (INIS)

    Romanoski, G.R.; Pih, Hui.

    1995-01-01

    Thirty-eight unique carbon-carbon composite materials of cylindrical architecture were fabricated by commercial vendors for evaluation as alternative impact shell materials for the modular heat source of the thermoelectric space power system. Characterization of these materials included gas gun impact tests where cylindrical specimens containing a mass simulant were fired at 55 m/s to impact a target instrumented to measure force. The force versus time output was analyzed to determine: peak force, acceleration, velocity, and displacement. All impact tests exhibited an equivalence between preimpact momentum and measured impulse. In addition, energy was conserved based on a comparison of preimpact kinetic energy and measured work. Impact test results showed that the currently specified material provided impact energy absorption comparable to the best alternatives considered to date

  14. Phase equilibrium study on system uranium-plutonium-tungsten-carbon

    International Nuclear Information System (INIS)

    Ugajin, Mitsuhiro

    1976-11-01

    Metallurgical properties of the U-Pu-W-C system have been studied with emphasis on phases and reactions. Free energy of compound formation, carbon activity and U/Pu segregation in the W-doped carbide fuel are estimated using phase diagram data. The results indicate that tungsten metal is useful as a thermochemical stabilizer of the carbide fuel. Tungsten has high temperature stability in contact with uranium carbide and mixed uranium-plutonium carbide. (auth.)

  15. The Earth System Science Pathfinder Orbiting Carbon Observatory (OCO) Mission

    Science.gov (United States)

    Crisp, David

    2003-01-01

    A viewgraph presentation describing the Earth System Science Pathfinder Orbiting Carbon Observatory (OCO) Mission is shown. The contents include: 1) Why CO2?; 2) What Processes Control CO2 Sinks?; 3) OCO Science Team; 4) Space-Based Measurements of CO2; 5) Driving Requirement: Precise, Bias-Free Global Measurements; 6) Making Precise CO2 Measurements from Space; 7) OCO Spatial Sampling Strategy; 8) OCO Observing Modes; 9) Implementation Approach; 10) The OCO Instrument; 11) The OCO Spacecraft; 12) OCO Will Fly in the A-Train; 13) Validation Program Ensures Accuracy and Minimizes Spatially Coherent Biases; 14) Can OCO Provide the Required Precision?; 15) O2 Column Retrievals with Ground-based FTS; 16) X(sub CO2) Retrieval Simulations; 17) Impact of Albedo and Aerosol Uncertainty on X(sub CO2) Retrievals; 18) Carbon Cycle Modeling Studies: Seasonal Cycle; 19) Carbon Cycle Modeling Studies: The North-South Gradient in CO2; 20) Carbon Cycle Modeling Studies: Effect of Diurnal Biases; 21) Project Status and Schedule; and 22) Summary.

  16. Decarbonization of the German energy system due to falling or rising power consumption?; Dekarbonisierung des deutschen Energiesystems durch sinkenden oder steigenden Stromverbrauch?

    Energy Technology Data Exchange (ETDEWEB)

    Guminski, Andrej; Roon, Serafin von [Forschungsgesellschaft fuer Energiewirtschaft mbH, Muenchen (Germany)

    2016-10-15

    Since the publication of the draft ''Climate Protection Plan 2050'' and the ''Green Paper on Energy Efficiency'', it is clear that the Federal Government is focusing on the electrification of the heat and transport sector in order to increase the share of renewable energies in these sectors. This step is not uncontroversial, and represents a paradigm shift in science and politics, because the reduction of the cross electricity consumption move into the background. It is now necessary to clearly distinguish between the conventional power consumption, which must continue to be tested for energy savings and efficiency potential, and the new power consumption, here referred to as the coupling current, which is accepted in order to achieve the objectives of the energy transition. Since the consideration of the energy transition as a purely national project is too short, possible positive and negative effects of the European Union Emission Trading System (EU ETS) deserve particular attention with regard to this reorientation. [German] Spaetestens seit der Veroeffentlichung des Entwurfs zum ''Klimaschutzplan 2050'' und des ''Gruenbuch Energieeffizienz'' ist klar, dass die Bundesregierung auf die Elektrifizierung des Waerme- und Verkehrssektors setzt, um den Anteil der erneuerbaren Energien in diesen Sektoren zu steigern. Dieser Schritt ist nicht unumstritten und stellt einen Paradigmenwechsel in Wissenschaft und Politik dar, denn auf einmal rueckt die Senkung des Bruttostromverbrauchs in den Hintergrund. Es gilt jetzt, klar zu trennen zwischen dem herkoemmlichen Stromverbrauch, der weiterhin auf Energieeinspar- und -effizienzpotenziale hin untersucht werden muss, und dem neuen, hier Koppelstrom genannten Stromverbrauch, welcher in Kauf genommen wird, um die Ziele der Energiewende zu erreichen. Da die Betrachtung der Energiewende als rein nationales Projekt zu kurz greift, verdienen moegliche

  17. Study of identification of AIJ/RPTES sites and the prospects for vulgarization of the solar energy systems in the Boucle du Mouhoun; Etude d'identification de sites AIJ/ RPTES et des perspectives de diffusion des systemes d'energie solaire dans la Boucle du Mouhoun

    Energy Technology Data Exchange (ETDEWEB)

    Zougouri, Aboubacar; Ouedraogo, Mariam; Sawadogo, Xavier

    2000-04-15

    The energy needs of the populations in Burkina Faso are enormous and it is difficult to satisfy. The main source of energy is the heating wood. The demand for wood of heating is increasingly strong involves the environment degradation. Thus the Regional Program in the Traditional energy sector (RPTES) takes place to fight against deforestation and to promote the use of other energy sources such as photovoltaic solar systems and petroleum. The aim of this study is to determine the needs of the households, of the groupings and associations and of the institutions in energy. It is a question of determining the adequate strategy to promote the photovoltaic solar systems in rural environment in order to meet the requirements in Community lighting, lighting and conservation of the drugs in the health centres and in leisure. [French] Les besoins energetiques des populations au Burkina Faso sont enormes et difficile a satisfaire. La principale source d'energie demeure le bois de chauffe. La demande en bois de chauffe est de plus en plus forte entraine la degradation de la nature. C'est ainsi que le Programme Regional dans le secteur des Energies Traditionnelles (RPTES) intervient pour lutter contre la deforestation et promouvoir l'utilisation d'autres sources d'energie telles les systemes solaires photovoltaiques et le petrole. Cette etude vise a determiner la demande des menages, des groupements et associations ainsi que celle des institutions en matiere d'energie. Il s'agit de determiner la strategie adequate pour promouvoir les systemes solaires photovoltaiques en milieu rural afin de repondre aux besoins en eclairage communautaire, en eclairage et conservation des medicaments dans les centres de sante et en loisirs.

  18. Zero carbon energy system of South East Europe in 2050

    International Nuclear Information System (INIS)

    Dominković, D.F.; Bačeković, I.; Ćosić, B.; Krajačić, G.; Pukšec, T.; Duić, N.; Markovska, N.

    2016-01-01

    Highlights: • 100% renewable energy system of the South East Europe has been achieved. • Sector integration makes the zero carbon system cheaper compared to the base year. • Numerous renewable technologies needed to achieve zero carbon in the year 2050. • Energy efficiency is a crucial part in a transition to the zero carbon energy system. • No technology has a larger share than 30%; increased security of energy supply. - Abstract: South East Europe is the region in a part of Europe with approximately 65.5 million inhabitants, making up 8.9% of Europe’s total population. The countries concerned have distinct geographical features, various climates and significant differences in gross domestic product per capita, so the integration of their energy systems is considered to be a challenging task. Large differences between energy mixes, still largely dominated by fossil-fuel consumption, make this task even more demanding. This paper presents the transition steps to a 100% renewable energy system which need to be carried out until the year 2050 in order to achieve zero carbon energy society. Novelty of this paper compared to other papers with similar research goals is the assumed sustainable use of biomass in the 100% renewable energy system of the region considered. It is important to emphasize here that only the sustainable use of biomass can be considered carbon-neutral. The resulting biomass consumption of the model was 725.94 PJ for the entire region, which is in line with the biomass potential of the region. Modelling the zero-carbon energy system was carried out using the smart energy system concept, together with its main integration pillars, i.e. power-to-heat and power-to-gas technologies. The resulting power generation mix shows that a wide variety of energy sources need to be utilized and no single energy source has more than a 30% share, which also increases the security of supply. Wind turbines and photovoltaics are the main technologies with

  19. Simulating the effects of light intensity and carbonate system composition on particulate organic and inorganic carbon production in Emiliania huxleyi.

    Science.gov (United States)

    Holtz, Lena-Maria; Wolf-Gladrow, Dieter; Thoms, Silke

    2015-05-07

    Coccolithophores play an important role in the marine carbon cycle. Variations in light intensity and external carbonate system composition alter intracellular carbon fluxes and therewith the production rates of particulate organic and inorganic carbon. Aiming to find a mechanistic explanation for the interrelation between dissolved inorganic carbon fluxes and particulate carbon production rates, we develop a numerical cell model for Emiliania huxleyi, one of the most abundant coccolithophore species. The model consists of four cellular compartments, for each of which the carbonate system is resolved dynamically. The compartments are connected to each other and to the external medium via substrate fluxes across the compartment-confining membranes. By means of the model we are able to explain several pattern observed in particulate organic and inorganic carbon production rates for different strains and under different acclimation conditions. Particulate organic and inorganic carbon production rates for instance decrease at very low external CO2 concentrations. Our model suggests that this effect is caused mainly by reduced HCO3(-) uptake rates, not by CO2 limitation. The often observed decrease in particulate inorganic carbon production rates under Ocean Acidification is explained by a downregulation of cellular HCO3(-) uptake. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  20. A gaseous measurement system for carbon-14 dioxide and carbon-14 methane: An analytical methodology to be applied in the evaluation of the carbon-14 dioxide and carbon-14 methane produced via microbial activity in volcanic tuff

    International Nuclear Information System (INIS)

    Dolan, M.M.

    1987-01-01

    The objectives of this study were to develop a gaseous measurement system for the carbon-14 dioxide and carbon-14 methane produced via microbial activity or geochemical action on leachate in tuff; to determine the trapping efficiency of the system for carbon-14 dioxide; to determine the trapping efficiency of the system for carbon-14 methane; to apply the experimentally determined factors regarding the system's trapping efficiency for carbon-14 dioxide and carbon-14 methane to a trapping algorithm to determine the activity of the carbon-14 dioxide and carbon-14 methane in a mixed sample; to determine the minimum detectable activity of the measurement process in picocuries per liter; and to determine the lower limit or detection of the measurement process in counts per minute

  1. Overview of NASA's Carbon Monitoring System Flux-Pilot Project

    Science.gov (United States)

    Pawson, Steven; Gunson, Michael R.; Jucks, Kenneth

    2011-01-01

    NASA's space-based observations of physical, chemical and biological parameters in the Earth System along with state-of-the-art modeling capabilities provide unique capabilities for analyses of the carbon cycle. The Carbon Monitoring System is developing an exploratory framework for detecting carbon in the environment and its changes, with a view towards contributing to national and international monitoring activities. The Flux-Pilot Project aims to provide a unified view of land-atmosphere and ocean-atmosphere carbon exchange, using observation-constrained models. Central to the project is the application of NASA's satellite observations (especially MODIS), the ACOS retrievals of the JAXA-GOSAT observations, and the "MERRA" meteorological reanalysis produced with GEOS-S. With a primary objective of estimating uncertainty in computed fluxes, two land- and two ocean-systems are run for 2009-2010 and compared with existing flux estimates. An transport model is used to evaluate simulated CO2 concentrations with in-situ and space-based observations, in order to assess the realism of the fluxes and how uncertainties in fluxes propagate into atmospheric concentrations that can be more readily evaluated. Finally, the atmospheric partial CO2 columns observed from space are inverted to give new estimates of surface fluxes, which are evaluated using the bottom-up estimates and independent datasets. The focus of this presentation will be on the science goals and current achievements of the pilot project, with emphasis on how policy-relevant questions help focus the scientific direction. Examples include the issue of what spatio-temporal resolution of fluxes can be detected from polar-orbiting satellites and whether it is possible to use space-based observations to separate contributions to atmospheric concentrations of (say) fossil-fuel and biological activity

  2. Study of the strategies and controls of fuel cell systems associated with traction; Etude des strategies et des structures de commande pour le pilotage des systemes energetiques a Pile a Combustible (PAC) destines a la traction

    Energy Technology Data Exchange (ETDEWEB)

    Lachaize, J.

    2004-09-15

    This work falls into project COPPACE (Contribution to the Control of Embedded Fuel cell) carried out by ALSTOM in partnership with the LEEI-INPT and the CEA and supported by the ADEME. The study deals with the modelling and the control of a Fuel Cell system (flow, pressure, temperature) and the definition of the control laws for the static inverters associated with the traction of power train. We develop then a strategy of management of energy by taking into account the criteria of the hydrogen consumption or energy stored in the ultracaps. Each step is verified by total simulation according to a specific profile of mission and a precise model of fuel cells which has been simplified to reduce the computing time. The control of this system is defined by a separate treatment of the components, to finalize the total function objective. The results of simulations show that the system can follow the requested power while controlling the critical elements. (author)

  3. Impact de la preparation des anodes crues et des conditions de cuisson sur la fissuration dans des anodes denses

    Science.gov (United States)

    Amrani, Salah

    La fabrication de l'aluminium est realisee dans une cellule d'electrolyse, et cette operation utilise des anodes en carbone. L'evaluation de la qualite de ces anodes reste indispensable avant leur utilisation. La presence des fissures dans les anodes provoque une perturbation du procede l'electrolyse et une diminution de sa performance. Ce projet a ete entrepris pour determiner l'impact des differents parametres de procedes de fabrication des anodes sur la fissuration des anodes denses. Ces parametres incluent ceux de la fabrication des anodes crues, des proprietes des matieres premieres et de la cuisson. Une recherche bibliographique a ete effectuee sur tous les aspects de la fissuration des anodes en carbone pour compiler les travaux anterieurs. Une methodologie detaillee a ete mise au point pour faciliter le deroulement des travaux et atteindre les objectifs vises. La majorite de ce document est reservee pour la discussion des resultats obtenus au laboratoire de l'UQAC et au niveau industriel. Concernant les etudes realisees a l'UQAC, une partie des travaux experimentaux est reservee a la recherche des differents mecanismes de fissuration dans les anodes denses utilisees dans l'industrie d'aluminium. L'approche etait d'abord basee sur la caracterisation qualitative du mecanisme de la fissuration en surface et en profondeur. Puis, une caracterisation quantitative a ete realisee pour la determination de la distribution de la largeur de la fissure sur toute sa longueur, ainsi que le pourcentage de sa surface par rapport a la surface totale de l'echantillon. Cette etude a ete realisee par le biais de la technique d'analyse d'image utilisee pour caracteriser la fissuration d'un echantillon d'anode cuite. L'analyse surfacique et en profondeur de cet echantillon a permis de voir clairement la formation des fissures sur une grande partie de la surface analysee. L'autre partie des travaux est basee sur la caracterisation des defauts dans des echantillons d'anodes crues

  4. System analytical assessment of the carbon balance in Austria. Final report part 1: carbon balance for 1990

    International Nuclear Information System (INIS)

    Orthofer, R.

    1997-09-01

    The report contains an analysis and quantification of the fluxes in the Austrian carbon system in 1990. Following subsystems were considered: agriculture, forestry, energy transformation and use, production and consumption of goods, and waste treatment. Austrian carbon imports and exports in products and goods were also quantified. The calculations for the forestry and agriculture sectors are based on the results of a dynamic model (cf. final report part 2) and for others on existing data or experts opinions. In total, Austria releases a net of 11,2 Mio t carbon (MTC) - which equals about 41,1 Mio t of CO 2 - into the atmosphere. This is about 1/3 less than the numbers for the 1990 carbon emission inventories which for 1990 were estimated with 17,0 MTC. Reasons for the differences between emission estimates and carbon balancing are the carbon storage in Austria's forests (5,3 MTC) and the mineralization of organic wastes (1,0 MTC) as well as other minor interactions. While the main pathway of carbon fluxes to the atmosphere goes from fossil fuel extraction and imports via the energy system, a considerable portion of carbon is transferred through other systems. This means in order to be able to plan effective greenhouse gas reduction strategies, the overall system must be considered. (author)

  5. Recht und Gewalt im internationalen System. Von G. I. Tunkin. (Veröffentlichungen des Instituts für Internationales Recht an der Universität Kiel, Band 93) / Henn-Jüri Uibopuu

    Index Scriptorium Estoniae

    Uibopuu, Henn-Jüri, 1929-2012

    1989-01-01

    Raamatuarvustus: Tunkin, G. I. Recht und Gewalt im internationalen System. - Berlin : Duncker und Humblot, 1986. - (Veröffentlichungen des Instituts für Internationales Recht an der Universität Kiel ; 93). 213 lk.

  6. EFFET DES TRAITEMENTS THERMIQUES SUR LA REACTION ENTRE DES COUCHES MINCES DE TITANE ET DES SUBSTRATS EN ACIER

    Directory of Open Access Journals (Sweden)

    D Slimani

    2015-06-01

    Full Text Available Des couches minces du titane pur ont été déposées avec la méthode de pulvérisation cathodique sur des substrats en acier, type FF80 K-1 contenants ~1% mass. en carbone. La réaction entre les deux parties du système substrat-couche mince est activée avec des traitements thermiques sous vide dans l’intervalle de températures de 400 à900°Cpendant 30 minutes. Les Spectres de diffraction de rayons x confirment l’inter- diffusion des éléments  chimiques du système résultants la formation et la croissance des nouvelles phases en particulier le carbure binaire TiC ayant des caractéristiques thermomécaniques importantes. L’analyse morphologique des échantillons traités  avec le microscope électronique à balayage (MEB montre l’augmentation du flux de diffusion atomique avec la température de recuit, notamment la diffusion du manganèse et du fer vers la surface libre des échantillons aux températures élevées provoquant la dégradation des propriétés mécaniques des revêtements contrairement au premiers stades d’interaction où on a obtenu des bonnes valeurs de la microdureté.

  7. Fractionated-combustion analysis of carbonate-containing phases in composite materials of the hydroxyapatite-calcium carbonate system

    Science.gov (United States)

    Goldberg, M. A.; Shibaeva, T. V.; Smirnov, V. V.; Kutsev, S. V.; Barinov, S. M.; Grigorovich, K. V.

    2012-12-01

    Materials in the hydroxyapatite (HA)-calcium carbonate (CC) system were synthesized by a precipitation method from aqueous solutions. According to the data of X-ray phase analysis and IR spectroscopy, the powders consisted of CC and AB-type carbonate-substituted HA (CHA). In order to determine the content of carbonate-containing phases in materials, the temperature-temporal mode of fractionated-combustion analysis of carbon was developed. The quantitative phase ratios and the degree of substitution of carbonate groups in CHA were determined. It was shown that the degree of substitution of carbonate groups in CHA increased from 2.47 to 5.31 wt % as the CC content increased from 13.50 to 88.33 wt %.

  8. Des-A-lupane in an East African lake sedimentary record as a new proxy for the stable carbon isotopic composition of C3 plants

    NARCIS (Netherlands)

    van Bree, Loes G.J.; Rijpstra, W. Irene C; Al-Dhabi, N.A.; Verschuren, D.; Sinninghe Damste, J.S.; de Leeuw, J.W.

    2016-01-01

    We studied the high-resolution and well-dated 25,000 year sedimentary record of Lake Challa, a deep tropical crater lake in equatorial East Africa, to explore new proxies for paleoenvironmental and paleohydrological change. Sedimentary biomarker analysis revealed the presence of des-A-triterpenoids

  9. Application des techniques de diffusion de la lumière des rayons X et des neutrons à l'étude des systèmes colloïdaux. Première partie : Présentation théorique des trois techniques Application of Light, X-Ray and Neutron Diffusion Techniques to the Study of Colloidal Systems. Part One : Theoretical Description of Three Techniques

    Directory of Open Access Journals (Sweden)

    Espinat D.

    2006-11-01

    Full Text Available Les techniques de diffusion, des rayons X, des neutrons et de la lumière, jouent un rôle très important pour la compréhension des milieux colloïdaux. Peu d'articles de la littérature s'attachent à présenter conjointement les trois méthodes. Nous avons, dans la première partie de cet article, détaillé les principes théoriques en insistent tout particulièrement sur les spécificités de chacune. Après les rappels concernant la diffusion par les systèmes dilués, nous nous sommes intéressés aux systèmes concentrés pour lesquels les entités diffusantes sont en interaction. Les milieux dispersés montrent souvent une certaine polydispersité que l'on cherche à mesurer; les techniques de diffusion permettent cette mesure. Nous terminerons cette revue par une description des appareillages utilisés. La deuxième partie de cet article concernera une large illustration des possibilités de ces méthodes d'analyse à l'étude des systèmes colloïdaux, sur la base de travaux effectués à I'IFP (Institut Français du Pétrole ou dans de nombreux laboratoires de recherche extérieurs. This article aims to describe X-ray, neutron and light scattering techniques with emphasis on their specific nature and their scope of application. Indeed, whereas light diffusion has been used for a long time in research laboratories, in particular for characterizing polymers in solution, small angle X-ray scattering has been the subject of renewed interest in recent years. Neutron scattering, which is obviously more difficultly accessible, has proven to be extremely useful for studying various systems for which light and X-ray scattering remain relatively powerless. Whereas there is an abundant literature concerning various applications of the three methods, it should be noted that only a few articles have attempted to describe all three techniques at the same time. In this article we have tried to make up for this lack, and as such it was

  10. ETUDE DE LA DISTRIBUTION DES CATIONS ECHANGEABLES

    African Journals Online (AJOL)

    SEI Joseph

    interfaces entre les solides, une solution aqueuse et un gaz généralement l'air. Ce procédé est favorisé par l'introduction de réactifs spécifiques appelés les collecteurs. Dans notre travail, on tient à déterminer les formes d'adsorption des collecteurs sur les surfaces minérales des carbonates (calcite et dolomite) et le quartz ...

  11. Construction and applied research of low-carbon building evaluation index system

    Science.gov (United States)

    Liu, Zhongwen; Dong, Xiaohong; Gao, Pengzhao

    2017-04-01

    Energy conservation in building is a key link on alleviating energy-deficient contradiction, improving the quality of human life environment, and realizing sustainable development in our country. In this paper, we construct low-carbon building evaluation index system and evaluation method from five aspects—low-carbon structure, low-carbon materials, low-carbon energy, low-carbon technology and low-carbon management. Finally, taking “Solar Valley” in Dezhou as an example, we make the evaluation to its situation of low-carbon building.

  12. Carbon price signal. Impact Analysis on the European Electricity System

    International Nuclear Information System (INIS)

    2016-03-01

    The Paris Agreement signed by 195 countries late in December 2015, after COP 21, created a new basis for efficient cooperation between countries in the fight against climate change. The technologies being rolled out by the electricity sector will have very different impacts on climate change and, for the time being, investments other than public aid for renewable energies are being guided primarily by prices. To shed more slight on the issue of greenhouse gas emissions, which is closely related to the challenges addressed at COP21, RTE initiated a study in 2015 based on the models used in its Generation Adequacy Report. ADEME wanted to contribute to this effort and offer its support. The present document outlines the approach taken to assessing the impact of the carbon price signal on emissions from the European electric power system, its production costs and its structural evolution over the medium term. This approach was discussed with members of the 'Network Outlook Committee' of the Transmission System Users' Committee which includes environmental NGOs as well as the main economic actors from the power sector. Key findings resulting from the analysis developed in this report include: Simulations conducted with the current generation fleet show that the carbon price would have to be close to euro 30/tonne at the European level to drive a significant reduction in emissions (about 100 million tonnes a year, or 15 %) from the European power sector. A higher price of about euro 100/tonne would help drive an emissions reduction of close to 30%. Over the medium and long terms, beyond an impact on the number of hours fossil fuel power plants would be run, having a high carbon price would send a signal encouraging investment in renewable energies and could incentivise the development of flexible and storage capacity. It would notably guarantee the profitability of gas-fired plants and renewable power development. The following assumptions are factored into the study

  13. Uncertainty and sensitivity analysis of applications of the PARK program system; Unsicherheits- und Sensitivitaetsanalyse von Anwendungen des Programmsystems PARK

    Energy Technology Data Exchange (ETDEWEB)

    Luczak-Urlik, D.; Bleher, M.; Jacob, P.; Mueller, H. [GSF - Forschungszentrum fuer Umwelt und Gesundheit Neuherberg GmbH, Oberschleissheim (Germany). Inst. fuer Strahlenschutz; Hofer, E.; Krzykacz, B. [Gesellschaft fuer Reaktorsicherheit mbH (Greece)

    1997-11-01

    The (PARK) program package for assessment and abatement of off-site radiological consequences of nuclear accidents establishes radiologic analyses and prognoses on the basis of the measured data obtained by the IMIS system for ambient radiation monitoring. A probabilistic uncertainty and sensitivity analysis has been performed of the PARK-based mean specific activities of fodder and food and the potential radiation exposure of the population. Uncertainties were expressed in model input parameters, i.e. in measured values and radioecologic parameters via subjective probability distributions, within the framework of various emission scenarios (nuclide spectra describing two release modes, dry and wet deposition, and at three times over a one-year period). The resulting output data distributions were determined by Monte Carlo simulations. As a rule, the results of the analyses depend on the selected emission scenario. Measured values proved to be the major source of uncertainties (especially from in-situ soil activity measurements), and also the activity transfer data from fodder to food. As for wet deposition, uncertainties were added by the parameters used for determination of the interception factors. As the measuring stations cannot correlate their measured gamma dose rates with meteorologic data (precipitations), derived information relating to larger areas such as a ``Kreis`` (administrative district) is very much subject to uncertainties. The uncertainties of the PARK results are increasing with assessed increases in rainfall. (orig.) [Deutsch] Das Programmsystem zur Abschaetzung und Begrenzung radiologischer Konsequenzen (PARK) erstellt radiologische Analysen und Prognosen aufgrund von Messdaten, welche im Rahmen des Integrierten Mess- und Informationssystems zur Ueberwachung der Umweltradioaktivitaet (IMIS) erhoben werden. Es wurde eine probabilistische Unsicherheits- und Sensitivitaetsanalyse fuer die in PARK berechneten mittleren spezifischen Aktivitaeten

  14. Critical carbon input to maintain current soil organic carbon stocks in global wheat systems.

    Science.gov (United States)

    Wang, Guocheng; Luo, Zhongkui; Han, Pengfei; Chen, Huansheng; Xu, Jingjing

    2016-01-13

    Soil organic carbon (SOC) dynamics in croplands is a crucial component of global carbon (C) cycle. Depending on local environmental conditions and management practices, typical C input is generally required to reduce or reverse C loss in agricultural soils. No studies have quantified the critical C input for maintaining SOC at global scale with high resolution. Such information will provide a baseline map for assessing soil C dynamics under potential changes in management practices and climate, and thus enable development of management strategies to reduce C footprint from farm to regional scales. We used the soil C model RothC to simulate the critical C input rates needed to maintain existing soil C level at 0.1° × 0.1° resolution in global wheat systems. On average, the critical C input was estimated to be 2.0 Mg C ha(-1) yr(-1), with large spatial variability depending on local soil and climatic conditions. Higher C inputs are required in wheat system of central United States and western Europe, mainly due to the higher current soil C stocks present in these regions. The critical C input could be effectively estimated using a summary model driven by current SOC level, mean annual temperature, precipitation, and soil clay content.

  15. Quantified carbon input for maintaining existing soil organic carbon stocks in global wheat systems

    Science.gov (United States)

    Wang, G.

    2017-12-01

    Soil organic carbon (SOC) dynamics in croplands is a crucial component of global carbon (C) cycle. Depending on local environmental conditions and management practices, typical C input is generally required to reduce or reverse C loss in agricultural soils. No studies have quantified the critical C input for maintaining SOC at global scale with high resolution. Such information will provide a baseline map for assessing soil C dynamics under potential changes in management practices and climate, and thus enable development of management strategies to reduce C footprint from farm to regional scales. We used the soil C model RothC to simulate the critical C input rates needed to maintain existing soil C level at 0.1°× 0.1° resolution in global wheat systems. On average, the critical C input was estimated to be 2.0 Mg C ha-1 yr-1, with large spatial variability depending on local soil and climatic conditions. Higher C inputs are required in wheat system of central United States and western Europe, mainly due to the higher current soil C stocks present in these regions. The critical C input could be effectively estimated using a summary model driven by current SOC level, mean annual temperature, precipitation, and soil clay content.

  16. Electrical conductivity of molten carbonate and carbonate-chloride systems coexisting with aluminium oxide powder

    Energy Technology Data Exchange (ETDEWEB)

    Nikolaeva, Elena V. [Institute of High Temperature Electrochemistry, Yekaterinburg (Russian Federation); Ural Federal Univ., Yekaterinburg (Russian Federation); Ural State Economic Univ., Yekaterinburg (Russian Federation); Bovet, Andrey L.; Zakiryanova, Irina D. [Institute of High Temperature Electrochemistry, Yekaterinburg (Russian Federation); Ural Federal Univ., Yekaterinburg (Russian Federation)

    2018-04-01

    The electrical properties of composite electrolytes (suspensions) composed of α-Al{sub 2}O{sub 3} powder and molten carbonate eutectic (Li{sub 2}CO{sub 3}-Na{sub 2}CO{sub 3}-K{sub 2}CO{sub 3}){sub eut} or molten carbonate-chloride mixture 0.72(Li{sub 2}CO{sub 3}-Na{sub 2}CO{sub 3}-K{sub 2}CO{sub 3}){sub eut}-0.28NaCl have been investigated by AC impedance method. This system shows a dependence of the electrical conductivity upon the temperature and the α-Al{sub 2}O{sub 3} content. The specific electrical conductivity of the α-Al{sub 2}O{sub 3}/(Li{sub 2}CO{sub 3}-Na{sub 2}CO{sub 3}-K{sub 2}CO{sub 3}){sub eut} system can be adequately described by the Maxwell equation for two-phase heterogeneous materials. The regression equation for the dependence of the specific conductivity of the α-Al{sub 2}O{sub 3}/(Li{sub 2}CO{sub 3}-Na{sub 2}CO{sub 3}-K{sub 2}CO{sub 3}){sub eut} composite on the aluminium oxide concentration and temperature was obtained.

  17. [Carbon efficiency of double-rice production system in Hunan Province, China].

    Science.gov (United States)

    Chen, Zhong-du; Wu, Yao; Ti, Jin-song; Chen, Fu; Li, Yong

    2015-01-01

    Improving the carbon efficiency of crop production systems is one of the important ways to realize low-carbon agriculture. A life cycle assessment approach and input-output calculation method was applied for a double-rice production system in the Hunan Province. Based on statistical data of crop yield and investment in the production system in the period from 2004 to 2012, carbon emission, carbon absorption, carbon efficiency and their dynamic changes of the double rice production systems were estimated. The results showed that the average of annual carbon emission from 2004 to 2012 was 656.4 x 10(7) kg CE. Carbon emissions from production and transport of fertilizer and pesticide accounted for a majority of agricultural input carbon emissions, approximately 70.0% and 15.9%, respectively. The carbon emission showed a decreasing trend from 2004 to 2012 in the Hunan Province, with an annual reduction rate of 2.4%, but the carbon emission intensity was in a trend of increase. The average of annual carbon absorption was 1547.0 x 10(7) kg C. The annual carbon absorption also showed a decreasing trend from 2004 to 2012 in Hunan Province, with an average annual reduction rate of 1.2%, and the carbon absorption intensity showed a trend of increase. Furthermore, production efficiency of carbon showed a slow upward trend. The economic efficiency of carbon showed a larger increasing rate with time, with an average annual growth rate of 9.9%. Ecological efficiency of carbon was stable and low, maintained at about 2.4 kg C . kg-1 CE. It indicated that the integrated carbon efficiency of Hunan double rice crop production system improved slowly with time and the key to improve the carbon efficiency of double rice production systems lies in reducing the rates of nitrogen fertilizer and pesticide, and improving their use efficiencies.

  18. Neutron elastic scattering cross-sections measurement on carbon and fluorine in epithermal energy range using PEREN platform; Mesure des sections efficaces de diffusion elastique des neutrons sur le carbone et le fluor dans le domaine epithermique sur la plate-forme PEREN

    Energy Technology Data Exchange (ETDEWEB)

    Thiolliere, N

    2005-10-15

    Molten Salt Reactor (MSR) based on Th/U cycle is one of the new generation concepts for nuclear energy production. A typical MSR is a graphite-moderated core with liquid fuel ({sup 7}LiF +ThF{sub 4} + UF{sub 4}). Many numerical studies based on Monte-Carlo codes are currently carried out but the validity of these numerical result relies on the precise knowledge of neutron cross sections used such as elastic scattering on carbon ({sigma}{sub C}), fluorine ({sigma}{sub F}) and lithium 7 ({sigma}{sub Li}). The goal of this work is to obtain {sigma}{sub C} and {sigma}{sub F} between 1 eV and 100 keV. Such measurements have been performed at the Laboratoire de Physique Subatomique et de Cosmologie (LPSC) de Grenoble on the experimental platform PEREN using slowing-down time spectrometers (C and CF{sub 2}) associated to a pulsed neutron generator (GENEPI). Capture rates are obtained for reference materials (Au, Ag, Mo and In) using YAP scintillator coupled to a photo-multiplier. Very precise simulations (MCNP code) of the experimental setup have been performed and comparison with experiments has led to the determination of {sigma}{sub C} and {sigma}{sub F} with accuracies of 1% and 2% respectively. These results show a small discrepancy to evaluated nuclear data file (ENDF). Measures of total cross-sections {sigma}{sub C} and {sigma}{sub F} at higher energy (200 - 600 keV) were also carried out at Centre des Etudes Nucleaires de Bordeaux using a transmission method. Mono-energetic neutrons were produced by protons accelerated by a Van de Graaff accelerator on a LiF target and transmitted neutrons are counted in a proportional hydrogen gaseous detector. Discrepancies of 5% and 9% for {sigma}{sub C} and {sigma}{sub F} respectively with ENDF have been shown. (author)

  19. Both acyl and des-acyl ghrelin regulate adiposity and glucose metabolism via central nervous system ghrelin receptors.

    Science.gov (United States)

    Heppner, Kristy M; Piechowski, Carolin L; Müller, Anne; Ottaway, Nickki; Sisley, Stephanie; Smiley, David L; Habegger, Kirk M; Pfluger, Paul T; Dimarchi, Richard; Biebermann, Heike; Tschöp, Matthias H; Sandoval, Darleen A; Perez-Tilve, Diego

    2014-01-01

    Growth hormone secretagogue receptors (GHSRs) in the central nervous system (CNS) mediate hyperphagia and adiposity induced by acyl ghrelin (AG). Evidence suggests that des-AG (dAG) has biological activity through GHSR-independent mechanisms. We combined in vitro and in vivo approaches to test possible GHSR-mediated biological activity of dAG. Both AG (100 nmol/L) and dAG (100 nmol/L) significantly increased inositol triphosphate formation in human embryonic kidney-293 cells transfected with human GHSR. As expected, intracerebroventricular infusion of AG in mice increased fat mass (FM), in comparison with the saline-infused controls. Intracerebroventricular dAG also increased FM at the highest dose tested (5 nmol/day). Chronic intracerebroventricular infusion of AG or dAG increased glucose-stimulated insulin secretion (GSIS). Subcutaneously infused AG regulated FM and GSIS in comparison with saline-infused control mice, whereas dAG failed to regulate these parameters even with doses that were efficacious when delivered intracerebroventricularly. Furthermore, intracerebroventricular dAG failed to regulate FM and induce hyperinsulinemia in GHSR-deficient (Ghsr(-/-)) mice. In addition, a hyperinsulinemic-euglycemic clamp suggests that intracerebroventricular dAG impairs glucose clearance without affecting endogenous glucose production. Together, these data demonstrate that dAG is an agonist of GHSR and regulates body adiposity and peripheral glucose metabolism through a CNS GHSR-dependent mechanism.

  20. Soil organic carbon sequestration and tillage systems in Mediterranean environments

    Science.gov (United States)

    Francaviglia, Rosa; Di Bene, Claudia; Marchetti, Alessandro; Farina, Roberta

    2016-04-01

    Soil carbon sequestration is of special interest in Mediterranean areas, where rainfed cropping systems are prevalent, inputs of organic matter to soils are low and mostly rely on crop residues, while losses are high due to climatic and anthropic factors such as intensive and non-conservative farming practices. The adoption of reduced or no tillage systems, characterized by a lower soil disturbance in comparison with conventional tillage, has proved to be positively effective on soil organic carbon (SOC) conservation and other physical and chemical processes, parameters or functions, e.g. erosion, compaction, ion retention and exchange, buffering capacity, water retention and aggregate stability. Moreover, soil biological and biochemical processes are usually improved by the reduction of tillage intensity. The work deals with some results available in the scientific literature, and related to field experiment on arable crops performed in Italy, Greece, Morocco and Spain. Data were organized in a dataset containing the main environmental parameters (altitude, temperature, rainfall), soil tillage system information (conventional, minimum and no-tillage), soil parameters (bulk density, pH, particle size distribution and texture), crop type, rotation, management and length of the experiment in years, initial SOCi and final SOCf stocks. Sampling sites are located between 33° 00' and 43° 32' latitude N, 2-860 m a.s.l., with mean annual temperature and rainfall in the range 10.9-19.6° C and 355-900 mm. SOC data, expressed in t C ha-1, have been evaluated both in terms of Carbon Sequestration Rate, given by [(SOCf-SOCi)/length in years], and as percentage change in comparison with the initial value [(SOCf-SOCi)/SOCi*100]. Data variability due to the different environmental, soil and crop management conditions that influence SOC sequestration and losses will be examined.

  1. Carbon dioxide in magmas and implications for hydrothermal systems

    Science.gov (United States)

    Lowenstern, J. B.

    2001-01-01

    This review focuses on the solubility, origin, abundance, and degassing of carbon dioxide (CO2) in magma-hydrothermal systems, with applications for those workers interested in intrusion-related deposits of gold and other metals. The solubility of CO2 increases with pressure and magma alkalinity. Its solubility is low relative to that of H2O, so that fluids exsolved deep in the crust tend to have high CO2/H2O compared with fluids evolved closer to the surface. Similarly, CO2/H2O will typically decrease during progressive decompression- or crystallization-induced degassing. The temperature dependence of solubility is a function of the speciation of CO2, which dissolves in molecular form in rhyolites (retrograde temperature solubility), but exists as dissolved carbonate groups in basalts (prograde). Magnesite and dolomite are stable under a relatively wide range of mantle conditions, but melt just above the solidus, thereby contributing CO2 to mantle magmas. Graphite, diamond, and a free CO2-bearing fluid may be the primary carbon-bearing phases in other mantle source regions. Growing evidence suggests that most CO2 is contributed to arc magmas via recycling of subducted oceanic crust and its overlying sediment blanket. Additional carbon can be added to magmas during magma-wallrock interactions in the crust. Studies of fluid and melt inclusions from intrusive and extrusive igneous rocks yield ample evidence that many magmas are vapor saturated as deep as the mid crust (10-15 km) and that CO2 is an appreciable part of the exsolved vapor. Such is the case in both basaltic and some silicic magmas. Under most conditions, the presence of a CO2-bearing vapor does not hinder, and in fact may promote, the ascent and eruption of the host magma. Carbonic fluids are poorly miscible with aqueous fluids, particularly at high temperature and low pressure, so that the presence of CO2 can induce immiscibility both within the magmatic volatile phase and in hydrothermal systems

  2. Analyse quantitative des effluents de pyrolyse en milieu ouvert et fermé Quantitative Analysis of Pyrolysis Effluents in an Open and Closed System

    Directory of Open Access Journals (Sweden)

    Behar F.

    2006-11-01

    Full Text Available Dans la première partie de l'article, nous décrivons une technique de pyrolyse en milieu ouvert qui permet de caractériser les matières organiques complexes comme le kérogène, le charbon, les asphaltènes de roche et d'huiles, les substances humiques et fulviques etc. Les effluents de pyrolyse sont récupérés et fractionnés quantitativement puis analysés par des techniques spécifiques comme la chromatographie en phase gazeuse et le couplage chromatographie/spectrométrie de masse. Dans la deuxième partie, est présentée une technique de pyrolyse en milieu fermé pour simuler au laboratoire l'évolution thermique des kérogènes, asphaltènes ou huiles. Nous nous sommes surtout attachés à dresser des bilans massiques et des bilans de l'hydrogène sur l'ensemble des produits de pyrolyse. Pour cela, nous avons distingué cinq classes de poids moléculaire croissant : C1, C2-C5, C6-C13, C14+ et coke. La récupération quantitative et la séparation de chacune des cinq fractions permet une analyse moléculaire détaillée de chacune d'elles. The first part of this article describes an open pyrolysis system in order to characterize complex organic matter such as kerogen, coal, rock and oil asphaltenes and humic substances, etc. Pyrolysis effluents are recovered, fractionated quantitatively by liquid chromatography, and then they are analyzed by specific techniques such as gas chromatography and chromatography/mass-spectrometry coupling. The second part describes a pyrolysis technique in a closed system, used for the laboratory simulation of the thermal evolution of kerogens, asphaltenes or oils. A special effort has been made to give the mass and hydrogen balances for all pyrolysis products. For this, five classes have been distinguised with increasing molecular weight: C1, C2-C5, C6-C13, C14+ and coke. The quantitative recovery and the separation of each of the five fractions is used to make a detailed molecular analysis of each of

  3. ANALYSE DES PERCEPTIONS LOCALES ET DES FACTEURS ...

    African Journals Online (AJOL)

    AISA

    1Faculté des Sciences Agronomiques (FSA), Université d'Abomey-Calavi (UAC), 01 BP 526 Cotonou Bénin. Email : cgbemavo@yahoo.fr. 2Institut National des Recherches Agricoles du Bénin, Centre de Recherches Agricoles d'Agonkanmey (CRA-A),. Laboratoire des Sciences du Sol, Eau et Environnement (LSSEE).

  4. Optical performance of the Gemini carbon dioxide laser fusion system

    International Nuclear Information System (INIS)

    Viswanathan, V.K.; Hayden, J.J.; Liberman, I.

    1979-01-01

    The performance of the Gemini two beam carbon dioxide laser fusion system was recently upgraded by installation of optical components with improved quality in the final amplifier. A theoretical analysis was conducted in conjunction with measurements of the new performance. The analysis and experimental procedures, and results obtained are reported and compared. Good agreement was found which was within the uncertainties of the analysis and the inaccuracies of the experiments. The focal spot Strehl ratio was between 0.24 and 0.3 for both beams

  5. Identification and estimation ot carbohydrates using radioisotopic methods; Identification et dosage des hydrates de carbone a l'aide des radioisotopes; Identifikatsiya i opredelenie karbogidratov s pomoshch'yu radioizotopnykh metodov; Identificacion u valoracion de hidratos de carbono con ayuda de radioisotopos

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, G O; Criddle, W J [Department of Chemistry, University College, Cardiff (United Kingdom)

    1962-01-15

    Isotope-dilution methods have been developed to identify and estimate the small amount of products formed when carbohydrates are irradiated in aqueous solution with Co{sup 60} gamma-radiation. Conventional analytical methods proved inadequate. After irradiation of C{sup 14}-sugar solutions, the autoradiographs prepared after paper chromatography indicated extensive degradation. Using a reverse isotope-dilution procedure involving the addition of known carriers, and conversion of the fragments into crystalline derivatives, various constituents were quantitatively determined. It is possible to distinguish between d- and Z-isomers, and estimate each isomer independently. The method is applicable to other analytical problems in carbohydrate chemistry. A new method for scanning and recording the radioactivity along paper-chromatogram strips, which involves an inexpensive modification to conventional counting equipment, is described. (author) [French] On a mis au point des methodes de dilution isotopique destinees a identifier et a doser les menues quantites de produits qui se forment lorsque des hydrates de carbone en solution aqueuse sont irradies par les rayons gamma du cobalt-60. A cet egard, les methodes d'analyse classiques se sont revelees inadequates. Apres irradiation de solutions de sucre marque au carbone-14, les autoradiogrammes etablis a la suite d'une chromatographic sur papier indiquaient une forte degradation. En recourant a une methode de dilution isotopique inverse, avec adjonction d'entraineurs connus, et en operant une conversion des fragments en derives cristallins, on a pu determiner quantitativement plusieurs elements constitutifs. Il est possible de distinguer les isomeres dextrogyres des isomeres levogyres et de doser chaque isomere independamment. La methode peut etre appliquee a d'autres problemes d'analyse dans la chimie des hydrates de carbone. Le memoire decrit une nouvelle methode permettant d'explorer et d'enregistrer la radioactivite de

  6. Zero carbon energy system of South East Europe in 2050

    DEFF Research Database (Denmark)

    Dominkovic, Dominik Franjo; Bačeković, I.; Ćosić, B.

    2016-01-01

    and photovoltaics are the main technologies with shares of 28.9% and 22.5%, followed by hydro power, concentrated solar power, biomass (mainly used in cogeneration units) and geothermal energy sources. To keep the biomass consumption within the sustainability limits, there is a need for some type of synthetic fuel...... the integration of their energy systems is considered to be a challenging task. Large differences between energy mixes, still largely dominated by fossil-fuel consumption, make this task even more demanding.This paper presents the transition steps to a 100% renewable energy system which need to be carried out...... until the year 2050 in order to achieve zero carbon energy society. Novelty of this paper compared to other papers with similar research goals is the assumed sustainable use of biomass in the 100% renewable energy system of the region considered. It is important to emphasize here that only...

  7. La Question de L'impunité des Auteurs de Violations des Droits de L'homme

    Directory of Open Access Journals (Sweden)

    Maria dos Remédios Fontes Silva

    2010-10-01

    Full Text Available Ce travail pretend faire reflechir à propos de la question de l'impunite des autorites de L'Etat face aux violations des droits de l'homme. On abordera cet egard: a le role de I'amnistie ble complicite des autoritesadministratives c la lenteur des procedures judicieuse.     L'analyse de cette question montre qui L'impunite des responsables des violations des droits de l'homme fait peser une menace sur I'ensemble du systeme de protection universelle des droits de l'homme.          On peut on conduire qu 'aucune societe que aspire à la democratie et ala justice ne peut se construire sur I'amoralite des crimes impunis et I'amnesie officielle.

  8. La microflore des sols du vignoble de Touraine

    Directory of Open Access Journals (Sweden)

    Claude Cuinier

    1975-12-01

    Full Text Available L'étude microbiologique des sols du vignoble porte sur trois années. Les déterminations quantitatives des bactéries, champignons, actinomycètes et des groupes fonctionnels des cycles de l'azote, du carbone et du soufre sont effectuées au cours de trois périodes du cycle végétatif de la vigne. Des variations saisonnières et annuelles sont observées. La microflore des sols viticoles est comparée à celle d'autres sols. Elle est au moins aussi riche et se distingue par son caractère plus aérobie. De grands écarts dans la composition microbiologique sont apparus entre des sols viticoles différant par leurs caractéristiques physiques et chimiques.

  9. Study of super-conductors in the aluminium-magnesium system; Etude des supraconducteurs du systeme aluminium-magnesium

    Energy Technology Data Exchange (ETDEWEB)

    Bonnin, B [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1965-05-01

    The author has designed and built an apparatus for the measurement of the magnetization of superconducting alloys by the classical method of extraction. Its originality is due to the employment of a cryostat having two helium baths. The lowest temperature reached by pumping on the innermost helium bath using a primary pump combined with a BOOSTER pump is 0.75 deg. K. Temperatures are determined with a aid of Hartshorn bridge. With this apparatus, it has been possible to study the influence of extended defects on the irreversible behaviour of the magnetization of aluminium-magnesium alloys. It has been shown that the effect of these defects is important chiefly in the superconductors alloys of the second kind. The introduction of the extended defects was controlled by electron microscopy and by the measure of the residual resistivities. Finally, the author has measured for these alloys the critical fields Hc, Hc1, Hc2, the transition temperatures Tc and the coefficients of electronic specific heat {gamma}. (author) [French] L'auteur a realise un appareillage lui permettant de mesurer l'aimantation d'alliages supraconducteurs par la methode classique d'extraction. L'originalite du montage reside en la construction d'un cryostat a double bain d'helium. La temperature la plus basse atteinte en pompant sur le bain d'helium interieur a l'aide d'une pompe BOOSTER est de 0.75 deg. K. Les temperatures sont determinees a l'aide d'un pont de Hartshorn. C'est avec cet appareillage que l'auteur a pu etudier l'influence des defauts etendus sur le comportement irreversible de l'aimantation d'alliages d'aluminium-magnesium. Il a montre que l'influence de ces defauts est essentiellement sensible dans les alliages supraconducteurs de la deuxieme espece. L'introduction des defauts etendus a ete controlee par microscopie electronique et par mesure de resistivite residuelle. Enfin, pour tous ces alliages ont ete mesures: les champs critiques Hc, Hc1, Hc2, les temperatures critiques Tc

  10. Contribution of archaeological analogs to the estimation of average corrosion rates and long term corrosion mechanisms of low carbon steel in soil; Apport des analogues archeologiques a l'estimation des vitesses moyennes et a l'etude des mecanismes de corrosion a tres long terme des aciers non allies dans les sols

    Energy Technology Data Exchange (ETDEWEB)

    Neff, D

    2003-11-15

    In the context of the French nuclear waste storage, a multi-barriers disposal is envisaged. Wastes could be put in metallic overpacks disposed in a clay soil. As these overpacks could be made of low carbon steel, it is important to understand the corrosion behaviour of this material in soil during period of several centuries. Indeed, it is necessary to consolidate the empirical data by a phenomenological approach. This includes laboratory experiments and modelling of the phenomenon which have to be validated and completed by the study of archaeological artefacts. This was the aim of this PhD-work. To this purpose, an analytical protocol has been elaborated: about forty archaeological artefacts coming from five dated sites (2. to 16. centuries) have been studied on cross section in order to observe on the same sample all the constituents of the system: metallic substrate/corrosion products/environment. The corrosion products are divided into two zones: the Dense Product Layer (DPL) in contact with the metal, and the Transformed Medium (TM) which are the corrosion products formed around soil minerals (quartz grains). The metallic substrate has been studied by the classical methods of materials science (optical and scanning electron microscope, energy and wavelength dispersive spectroscopies). It has been verified that despite their heterogeneity of structure and composition, they are all hypo-eutectoids steels that can contain phosphorous until 0.5 wt%. The corrosion products have been analysed by local structural analytical methods as micro-diffraction under synchrotron radiation ({mu}XRD) and Raman micro-spectroscopy. These two complementary techniques and also the elemental composition analysis conducted to the characterisation of the corrosion forms. On the majority of the samples coming from four sites, the DPL are constituted by goethite including marbles of magnetite/maghemite. On the artefacts from the fifth site, a particular corrosion form has been

  11. Deployment, Design, and Commercialization of Carbon-Negative Energy Systems

    Science.gov (United States)

    Sanchez, Daniel Lucio

    Climate change mitigation requires gigaton-scale carbon dioxide removal technologies, yet few examples exist beyond niche markets. This dissertation informs large-scale implementation of bioenergy with carbon capture and sequestration (BECCS), a carbon-negative energy technology. It builds on existing literature with a novel focus on deployment, design, commercialization, and communication of BECCS. BECCS, combined with aggressive renewable deployment and fossil emission reductions, can enable a carbon-negative power system in Western North America by 2050, with up to 145% emissions reduction from 1990 levels. BECCS complements other sources of renewable energy, and can be deployed in a manner consistent with regional policies and design considerations. The amount of biomass resource available limits the level of fossil CO2 emissions that can still satisfy carbon emissions caps. Offsets produced by BECCS are more valuable to the power system than the electricity it provides. Implied costs of carbon for BECCS are relatively low ( 75/ton CO2 at scale) for a capital-intensive technology. Optimal scales for BECCS are an order of magnitude larger than proposed scales found in existing literature. Deviations from optimal scaled size have little effect on overall systems costs - suggesting that other factors, including regulatory, political, or logistical considerations, may ultimately have a greater influence on plant size than the techno-economic factors considered. The flexibility of thermochemical conversion enables a viable transition pathway for firms, utilities and governments to achieve net-negative CO 2 emissions in production of electricity and fuels given increasingly stringent climate policy. Primary research, development (R&D), and deployment needs are in large-scale biomass logistics, gasification, gas cleaning, and geological CO2 storage. R&D programs, subsidies, and policy that recognize co-conversion processes can support this pathway to commercialization

  12. Burst slug detection system in french power reactors (1961); La detection des ruptures de gaines dans les reacteurs de puissance francais (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Megy, J; Roguin, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    Gas samples are taken from the channels of the reactor and the short lived fission products are electrostatically collected to be analysed by a phosphor and photomultiplier system. The electrostatic collection and rotating electrode detector is described and its main uses exposed. Experience has shown the interest of measuring the evolution of fission products activities and not their absolute value only. In this way, data processing equipment have been designed and adapted to the detection apparatus. The system developed and realized for the G-l - G-2 - G-3 - EDF-1 - EDF-2 reactors are compared. (authors) [French] Un prelevement de gaz est effectue dans les canaux du reacteur et les produits de fission a vie courte sont collectes electrostatiquement pour etre analyses par un ensemble scintillateur-photomultiplicateur. Le detecteur a collection electrostatique et electrode tournante est decrit et ses applications principales sont exposees. L'experience a montre l'interet de mesurer l'evolution des activites en produits de fission et non seulement leur valeur absolue. D'ou le developpement d'ensembles de traitement des informations associes aux chaines de detection. Comparaison des realisations sur les reacteurs G-l - G-2 - G-3 - EDF-1 et EDF-2. (auteurs)

  13. A Commercialization Roadmap for Carbon-Negative Energy Systems

    Science.gov (United States)

    Sanchez, D.

    2016-12-01

    The Intergovernmental Panel on Climate Change (IPCC) envisages the need for large-scale deployment of net-negative CO2 emissions technologies by mid-century to meet stringent climate mitigation goals and yield a net drawdown of atmospheric carbon. Yet there are few commercial deployments of BECCS outside of niche markets, creating uncertainty about commercialization pathways and sustainability impacts at scale. This uncertainty is exacerbated by the absence of a strong policy framework, such as high carbon prices and research coordination. Here, we propose a strategy for the potential commercial deployment of BECCS. This roadmap proceeds via three steps: 1) via capture and utilization of biogenic CO2 from existing bioenergy facilities, notably ethanol fermentation, 2) via thermochemical co-conversion of biomass and fossil fuels, particularly coal, and 3) via dedicated, large-scale BECCS. Although biochemical conversion is a proven first market for BECCS, this trajectory alone is unlikely to drive commercialization of BECCS at the gigatonne scale. In contrast to biochemical conversion, thermochemical conversion of coal and biomass enables large-scale production of fuels and electricity with a wide range of carbon intensities, process efficiencies and process scales. Aside from systems integration, primarily technical barriers are involved in large-scale biomass logistics, gasification and gas cleaning. Key uncertainties around large-scale BECCS deployment are not limited to commercialization pathways; rather, they include physical constraints on biomass cultivation or CO2 storage, as well as social barriers, including public acceptance of new technologies and conceptions of renewable and fossil energy, which co-conversion systems confound. Despite sustainability risks, this commercialization strategy presents a pathway where energy suppliers, manufacturers and governments could transition from laggards to leaders in climate change mitigation efforts.

  14. Study of the catalytic activity of mixed non-stoichiometric uranium-thorium oxides in carbon monoxide oxidation; Etude de l'activite catalytique des oxydes mixtes d'uranium et de thorium non stoechiometriques dans l'oxydation du monoxyde de carbone

    Energy Technology Data Exchange (ETDEWEB)

    Brau, G [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-06-01

    The aim of this work has been to study the catalytic properties of non-stoichiometric uranium-thorium oxides having the general formula U{sub x}Th{sub 1-x}O{sub 2+y}, for the oxidation of carbon monoxide. The preparation of pure, homogeneous, isotropic solids having good structural stability and a surface area as high as possible calls for a strict control of the conditions of preparation of these oxides right from the preparation of 'mother salts': the mixed oxalates U{sub x}Th{sub 1-x}(C{sub 2}O{sub 4}){sub 2}, 2H{sub 2}O. A study has been made of their physico-chemical properties (overall and surface chemical constitution, texture, structure, electrical conductivity), as well as of their adsorption properties with respect to gaseous species occurring in the catalytic reaction. This analysis has made it possible to put forward a reaction mechanism based on successive oxidations and reductions of the active surface by the reactants. A study of the reactions kinetics has confirmed the existence of this oxidation-reduction mechanism which only occurs for oxides having a uranium content of above 0.0014. The carbon dioxide produced by the reaction acts as an inhibitor by blocking the sites on which carbon monoxide can be adsorbed. These non-stoichiometric mixed oxides are a particularly clear example of catalysis by oxygen exchange between the solid and the gas phase. (author) [French] Ce travail a pour but l'etude des proprietes catalytiques des oxydes mixtes d'uranium et de thorium non stoechiometriques de formule generale U{sub x}Th{sub 1-x}O{sub 2+y} dans l'oxydation du monoxyde de carbone. L'obtention de solides purs, homogenes, isotropes, de bonne stabilite structurale et d'aire specifique aussi elevee que possible, exige de controler rigoureusement les conditions de preparation de ces oxydes des l'elaboration de leurs 'ascendants': les oxalates mixtes U{sub x}Th{sub 1-x}(C{sub 2}O{sub 4}){sub 2}, 2H{sub 2}O. Leurs proprietes physico-chimiques (composition

  15. The data acquisition system PHON for the detectors of the PHOENICS experiment; Das Datenerfassungssystem PHON fuer die Detektoren des PHOENICS-Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, W.

    1991-07-01

    The PHON data acquisition system for the PHOENICS experiment at the stretcher ring ELSA in Bonn and its development is described. PHON is based on a fast parallel CAMAC readout with VME front-end processors and a VAX/VMS computer, allowing c omfortable control and programming. The current configuration of the PHON system at the PHOENICS detector uses two CAMAC branches that are read out in parallel. The data is transferred to the VAX by either the ethernet (max. rate 100 kByte/sec) or a bus coupler device (max. rate 650 kByte/sec). On the VAX the data can be stored on a harddisk and analyzed by several PHON online tasks. The harddisk limits the maximum data rate to a value of approximately 180 kByte/sec. The maximum trigger rate achieved is about 150 Hz. Two kinds of user shells are realized to control the PHON system. A command shell follows the standard of the control language of the VMS operating system and a graphic user interface uses the `X Window System`. The modular structure of the PHON system and the unique kind of creation of all PHON programs makes a further development of the system easy to do. (orig.). [Deutsch] Die vorliegende Arbeit beschreibt die Entwicklung und Funktion des Datenerfassungssystems PHON. Das System basiert auf einer parallelen Auslese von CAMAC-Branchen mit VME-Front-End-Prozessoren und einem VAX/VMS-Hauptrechner, der eine komfortable Programmsteuerung und -Entwicklung erlaubt. Momentan werden an dem PHOENICS-Detektor zwei CAMAC-Branche von jeweils einem VME-Front-End-Prozessor ausgelesen. Die Daten koennen wahlweise ueber Ethernet (max. Uebertragungsrate ca. 100 kByte/sec), oder ueber einen Buskoppler (max. 650 kByte/sec) auf den Hauptrechner (VAXStation 3200) transferiert werden. Dort koennen sie auf einer Festplatte abgespeichert und von verschiedenen Analyseprozessen verarbeitet werden. In dieser Konfiguration werden Datenraten von 180 kByte/sec erzielt. Die maximale Triggerrate betraegt etwa 150 Hz. Die Steuerung des PHON-Systems

  16. Spectra theory for nuclei with closed shells (1962); Theorie des spectres des noyaux a couches completes (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Gillet, V [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    second approximation which alone leads to a region of optimum agreement identical for both carbon and oxygen. An excellent general agreement is obtained with the known spectra of these two nuclei. The importance of higher order terms in the calculation of the 3{sup -} and 5{sup -} collective states for calcium 40 is demonstrated; furthermore it is possible to explain these levels only by the second approximation. Certain forecasts are made using the effective forces thus found. (author) [French] On applique une theorie unifiee des spectres des noyaux a couches completes, fondee sur les excitations elementaires particule-trou de ces systemes, a l'etude du carbone 12, de l'oxygene i6 et du calcium.40. Deux approximations sont utilisees. La premiere consiste a diagonaliser l'interaction residuelle a deux corps dans un sous-espace limite de configurations a une particule et un trou. Sa validite repose sur l'energie importante exigee pour l'excitation d'une paire particule-trou. La seconde approximation consiste a resommer la sous-serie infinie des diagrammes particule-trou. Elle est equivalente a la methode de Hartree-Fock dependante du temps ou a la methode des Quasi-Bosons. Son domaine de validite, dans le cas nucleaire, n'est pas bien compris. Les diagrammes sommes sont preponderants a la limite des fortes densites, alors que la densite nucleaire est de l'ordre de l'unite. La violation des Principe de Pauli, dans cette approximation, n'est justifiee que si le nombre de paires excitees est petit par rapport au nombre d'etats de particule disponibles; or, dans les noyaux legers les degenerescences des couches sont petites. Neanmoins cette approximation qui postule l'existence d'un champ nucleaire moyen, lentement variable dans le temps par rapport aux periodes des nucleons a le merite d'etre self-consistante, de donner des etats propres orthogonaux a l'etat non physique du centre de masse et d'ameliorer le calcul des regles de somme. Pour determiner et limiter le role de la

  17. Research trends in radiobiology since 40 years. a new approach: the enzymatic repair function of DNA, internal factor in evolution of biological systems under irradiation; Etude des tendances des recherches en radiologie depuis 40 ans. Une nouvelle voie de recherche: la fonction de reparation enzymatique de l'ADN, facteur interne d'evolution des systemes biologiques sous rayonnement

    Energy Technology Data Exchange (ETDEWEB)

    Mouton, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    In the first part of the report, the author attempts to draw an historical scheme of successive research working hypotheses in radiobiology since 1924. Less than a generation ago the effect of radiation exposure were viewed as being direct, immediate, irreparable and unmodifiable. Now it is generally accepted that radiation lesion can also be indirect, delayed, reparable and often modified with appropriate chemical or biochemical treatment. It was however in 1962-1964 that came the decisive breakthrough in radiobiology with the discovery that the cell possesses a natural active self-defense mechanism against whatever stress would affect the integrity of the genetic message contained in the DNA structure itself. The existence of what could be considered as a fourth DNA function i.e. self-repair by enzymatic action under genetic control-brings at least to radiobiology the missing molecular biology basis it needed to get out of its 'phenomenological night' after abandon of the generalization of Lea's theory through lack of experimental evidence. In the second part, which is a prospective one, the author tries to set an enlarged synthesis considering the possible role of DNA repair system not only in cell survival - in presence or absence of dose modifiers or mutagens - but also in the artificial and natural evolution of biological system exposed to sub-lethal doses of radiation. Most recent data from the literature fit well with what must be still considered as a general working hypothesis. Studies dealing with phenotypic and genotypic characters linked with the acquisition of gamma and UV radiation resistance in 'Escherichia coli K12' has been started by the author, in collaboration with O. Tremeau, in order to bring a new experimental contribution in this respect. (author) [French] Dans la premiere partie, l'auteur tente de retracer l'historique des hypotheses successives qui ont jalonne les avances de la radiobiologie depuis 1924

  18. A New Energy-Saving Catalytic System: Carbon Dioxide Activation by a Metal/Carbon Catalyst.

    Science.gov (United States)

    Yun, Danim; Park, Dae Sung; Lee, Kyung Rok; Yun, Yang Sik; Kim, Tae Yong; Park, Hongseok; Lee, Hyunjoo; Yi, Jongheop

    2017-09-22

    The conversion of CO 2 into useful chemicals is an attractive method to reduce greenhouse gas emissions and to produce sustainable chemicals. However, the thermodynamic stability of CO 2 means that a lot of energy is required for its conversion into chemicals. Here, we suggest a new catalytic system with an alternative heating system that allows minimal energy consumption during CO 2 conversion. In this system, electrical energy is transferred as heat energy to the carbon-supported metal catalyst. Fast ramping rates allow high operating temperatures (T app =250 °C) to be reached within 5 min, which leads to an 80-fold decrease of energy consumption in methane reforming using CO 2 (DRM). In addition, the consumed energy normalized by time during the DRM reaction in this current-assisted catalysis is sixfold lower (11.0 kJ min -1 ) than that in conventional heating systems (68.4 kJ min -1 ). © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Application of Fiber Optic Instrumentation (Validation des systemes d’instrumentation a fibres optiques)

    Science.gov (United States)

    2012-07-01

    gratings per system. The O/E amplifier module combines negatively biased photodiodes with transimpedence SYSTEM DEVELOPMENT 3 - 4 RTO-AG-160-V22...3a). The sub-components that make up the system are as follows: c-band tunable laser, optical network, Optical-to-Electrical (O/E) amplifier ...resides on the cPCI bus and is configured, controlled, and monitored via the host cPCI processor. The optical network and the O/E amplifier were designed

  20. Support systems for faces and workings (Le soutenement des tailles ou chantiers d'exploitation)

    Energy Technology Data Exchange (ETDEWEB)

    Stassen, P

    1978-01-01

    Various support systems for use in underground mining are discussed, these include: A. Props: wooden props, steel props and yielding props. B. Roofbars: wooden bars, solid steel bars, steel link bars, steel flange bars, cruciform steel bars. C. Chocks: working conditions, timber release chocks, steel-girder chocks, mechanical chocks and chock-type supports. D. Powered supports: classification of powered support systems, the parameters which have to be considered when selecting the right type of powered support, minimal load- bearing requirement for powered supports, characteristic features of some powered-support system. (10 refs.) (In French)

  1. MANOLA - demonstration of the manipulator and transport vehicle system; MANOLA. Vorstellung des Manipulator- und Transportwagensystems

    Energy Technology Data Exchange (ETDEWEB)

    Kern, P.; Gentes, S. [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Inst. fuer Technologie und Management im Baubetrieb, Technologie und Management des Rueckbaus kerntechnischer Anlagen

    2011-07-01

    The deconstruction of nuclear facilities has triggered the construction of remote handling systems. For the decontamination of surfaces the use of automatic robotics has significantly decreased the dose rate of the personnel and increased the efficiency. The authors describe the carrier system for the project MANOLA (manipulator controlled laser ablation technology) that can not only move in vertical and horizontal direction but also circumnavigate obstacles. This has reduced the cycle time and increased the efficiency. The weight of the transport vehicle is also reduced compared to the previous system AMANDA.

  2. CHP systems to save money and cut carbon.

    Science.gov (United States)

    Hopkins, Ian

    2014-10-01

    According to Ian Hopkins, a director of ENER-G Combined Power--which has delivered more than 50 CHP-led energy services contracts within the healthcare sector, having, for the past 30 years, designed and manufactured CHP systems at its global headquarters and R&D centre in Salford--'the energy cost and carbon-saving benefits of combined heat and power are difficult to match where there is a large heating/cooling demand over extended periods'. In this article, he explains how hospitals and other busy healthcare facilities thus 'make ideal bedfellows' for CHP, and outlines the key criteria and considerations, such as sizing, for healthcare engineers, when looking to specify such a system.

  3. Challenges to China's transition to a low carbon electricity system

    International Nuclear Information System (INIS)

    Kahrl, Fredrich; Williams, Jim; Ding Jianhua; Hu Junfeng

    2011-01-01

    We examine the challenges to China's transition to a low carbon electricity system, in which renewable energy would play a significant role. China's electricity system currently lacks the flexibility in planning, operations, and pricing to respond to conflicting pressures from demand growth, rising costs, and environmental mandates in a way that simultaneously maintains reliability, decarbonizes the system, and keeps prices within acceptable bounds. Greater flexibility crucially requires the ability to more systematically and transparently manage and allocate costs. This will require re-orientating sector institutions still rooted in central planning, and strengthening independent regulation. Some of the necessary changes require fundamental political and legal reforms beyond the scope of energy policy. However, the system's flexibility can still be increased through the development of traditional planning and regulatory tools and approaches, such as an avoided cost basis for energy efficiency investments, more integrated planning to improve the coordination of generation, transmission, and demand-side investments, and a transparent ratemaking process. The judicious application of OECD electricity sector experience and skills can support these developments. - Research highlights: → China's electricity system currently lacks the flexibility to integrate renewables and reduce CO 2 emissions on a large scale at an acceptable cost and level of reliability. → The challenges to increased flexibility are more institutional than technological. → Chinese government agencies need new approaches to basic power system planning and ratemaking. → OECD countries can help address these challenges through the transfer of 'soft' technologies.

  4. Stick and feel system design: Systèmes de restitution des efforts au manche

    National Research Council Canada - National Science Library

    Gibson, J. C; Hess, R. A

    1997-01-01

    Since the earliest days of manned flight, designers have to sought to assist the pilot in the performance of tasks by using stick and feel systems to bring these tasks within the bounds of human physical capabilities...

  5. Air conditioning systems of Porsche Panamera; Das Klimatisierungssystem des Porsche Panamera

    Energy Technology Data Exchange (ETDEWEB)

    Mall, Gernot; Deyhle, Hagen [Porsche AG, Stuttgart (Germany); Engelhardt, Martin [Behr GmbH und Co. KG, Stuttgart (Germany); Gremme, Johannes [BehrHella Thermocontrol GmbH, Lippstadt (Germany)

    2010-07-01

    The Porsche Panama, an innovative Gran Turismo is the newest edition to the Porsche sportscar family. The Panamera climate control system is a major contributor in achieving the goal of premium driver comfort. In addition to excellent performance and comfort requirements on the system and package and an uncompromising lightweight design, premium comfort for the rear seat passengers was of special emphasis. These targets were achieved through a newly developed 2- respective 4-zone climate control system. The climatic comfort from the passenger's point of view is enhanced due to the ability to individually set temperature, air distribution and air volume for every passenger. The system incorporates a model based ''air volume control'' and uses a distinguishing feature, a dashboard integrated air distribution field. (orig.)

  6. Durée de vie des réseaux d’assainissement, modélisation Service life in sewerage system, simulation

    Directory of Open Access Journals (Sweden)

    Jauberthie R.

    2012-09-01

    Full Text Available La modélisation des systèmes physiques peut parfois être rendue difficile par la présence de bruits et perturbations. Lorsqu’il est possible de faire des hypothèses sur les caractéristiques de ces bruits et perturbations, les approches permettant d’inclure un modèle de ces perturbations dans le modèle du processus sont pertinentes et permettent entre autre de reconstruire l’état du processus. Cependant, ces hypothèses sont rarement satisfaites en pratique et, les modèles eux-mêmes sont parfois entachés d’erreurs. Néanmoins, ces grandeurs et paramètres non mesurés sont amenés à fluctuer entre des bornes relativement bien connues. C’est pourquoi il est naturel de se concentrer sur des estimateurs ensemblistes garantis en tout temps, dans un cadre déterministe à erreurs bornées. Ces méthodes relèvent de l’analyse par intervalles, qui est apparue pour la première fois dans l’ouvrage “Interval Analysis”, de R.E. Moore en 1966. Il a été montré que les modèles ensemblistes sont bien adaptés pour la détection d’aléas ou de défauts de processus et la formulation de diagnostics pertinents quant à l’amélioration du déroulement de processus. Après une présentation des modèles les plus courants, une analyse de l’endommagement des ouvrages d’assainissement de la ville de Rennes est entreprise. Ces ouvrages représentent le réseau unitaire et le réseau des eaux usées du système séparatif et sont constitués de matériaux à base cimentaire, armés ou non. L’endommagement est traduit par l’intermédiaire de différents indicateurs des propriétés des matériaux prélevés dans la ville. A ce jour, nous disposons d’une centaine de prélèvements effectués dans différentes rues et caractérisés par des dates de pose comprise entre 1892 à nos jours. Ainsi, dans ce travail, partant d’un modèle ensembliste du comportement des différents tronçons de canalisation des eaux usées, nous

  7. MRT of the central nervous system. 2. rev. and enl. ed.; MRT des Zentralnervensystems

    Energy Technology Data Exchange (ETDEWEB)

    Forsting, Michael [Universitaetsklinikum Essen (Germany). Inst. fuer Diagnostische und Interventionelle Radiologie und Neuroradiologie; Jansen, Olav (ed.) [Universitaetsklinikum Schleswig-Holstein, Kiel (Germany). Klinik fuer Radiologie und Neuroradiologie

    2014-11-01

    The book on MRT of the central nervous system includes the following chapters: anatomy, vascular diseases, brain tumors, craniocerebral injuries, infectious diseases, multiple sclerosis and related diseases, metabolic diseases, degenerative diseases, malformations and developmental disorders, hydrocephalus and intracranial hypertension, spinal marrow, degenerative caused spinal and foraminal stenosis, traumata, tumors and tumor-like neoplasm, vascular diseases, inflammations, infections and related diseases, diseases of the peripheral nervous system.

  8. Umweltgeochemische Charakterisierung der niedermolekularen organischen Fracht des Flußsystems Lippe

    OpenAIRE

    Dsikowitzky, Larissa

    2002-01-01

    Rivers are a sensitive and complex ecosystem hosting a diverse spectrum of organisms. Human activities have resulted in increasing river pollution due to input of organic contaminants into the river systems (anthropogenic input). The main emphasis of the present study is a comprehensive examination of anthropogenic and non-anthropogenic low-molecular weight organic compounds in a selected river system. The Lippe River (North Rhine-Westphalia, Germany) was chosen for this approach because it i...

  9. Carbon material based microelectromechanical system (MEMS): Fabrication and devices

    Science.gov (United States)

    Xu, Wenjun

    This PhD dissertation presents the exploration and development of two carbon materials, carbon nanotubes (CNTs) and carbon fiber (CF), as either key functional components or unconventional substrates for a variety of MEMS applications. Their performance in three different types of MEMS devices, namely, strain/stress sensors, vibration-powered generators and fiber solar cells, were evaluated and the working mechanisms of these two non-traditional materials in these systems were discussed. The work may potentially enable the development of new types of carbon-MEMS devices. Carbon nanotubes were selected from the carbon family due to several advantageous characteristics that this nanomaterial offers. They carry extremely high mechanical strength (Ey=1TPa), superior electrical properties (current density of 4x109 A/cm2), exceptional piezoresistivity (G=2900), and unique spatial format (high aspect ratio hollow nanocylinder), among other properties. If properly utilized, all these merits can give rise to a variety of new types of carbon nanotube based micro- and nanoelectronics that can greatly fulfill the need for the next generation of faster, smaller and better devices. However, before these functions can be fully realized, one substantial issue to cope with is how to implement CNTs into these systems in an effective and controllable fashion. Challenges associated with CNTs integration include very poor dispersibility in solvents, lack of melting/sublimation point, and unfavorable rheology with regard to mixing and processing highly viscous, CNT-loaded polymer solutions. These issues hinder the practical progress of CNTs both in a lab scale and in the industrial level. To this end, a MEMS-assisted electrophoretic deposition technique was developed, aiming to achieve controlled integration of CNT into both conventional and flexible microsystems at room temperature with a relatively high throughput. MEMS technology has demonstrated strong capability in developing

  10. Carbon-Based Regenerable Sorbents for the Combined Carbon Dioxide and Ammonia Removal for the Primary Life Support System (PLSS)

    Science.gov (United States)

    Wojtowicz, Marek A.; Cosgrove, Joseph E.; Serio, Michael A.; Manthina, Venkata; Singh, Prabhakar; Chullen, Cinda

    2014-01-01

    Results are presented on the development of reversible sorbents for the combined carbon dioxide and trace-contaminant (TC) removal for use in Extravehicular Activities (EVAs). Since ammonia is the most important TC to be captured, data on TC sorption presented in this paper are limited to ammonia, with results relevant to other TCs to be reported at a later time. The currently available life support systems use separate units for carbon dioxide, trace contaminants, and moisture control, and the long-term objective is to replace the above three modules with a single one. Furthermore, the current TC-control technology involves the use of a packed bed of acid-impregnated granular charcoal, which is non-regenerable, and the carbon-based sorbent under development in this project can be regenerated by exposure to vacuum at room temperature. The objective of this study was to demonstrate the feasibility of using carbon sorbents for the reversible, concurrent sorption of carbon dioxide and ammonia. Several carbon sorbents were fabricated and tested, and multiple adsorption/vacuum-regeneration cycles were demonstrated at room temperature, and also a carbon surface conditioning technique that enhances the combined carbon dioxide and ammonia sorption without impairing sorbent regeneration.

  11. Impacts from electric railway operation on the power supply system characteristic; Einfluss des elektrischen Bahnbetriebs auf das Tagesbelastungsdiagramm der Energieversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Bogdanov, C. [Militaerhochschule fuer Verkehr ``Todor Kableshkov``, Sofia (Bulgaria)

    1995-12-31

    Some characteristic figures are derived from daily load diagrams of electric railways, analized and compared with those of public power supply load diagram, especially with regard to sharing in base - medium - peak load and in day - night times, and optimizations are proposed. (orig.) [Deutsch] Fuer die Tagesbelastungsdiagramme elektrischer Bahnen werden einige Kennziffern gebildet, analysiert und mit denen des Tagesbelastungsdiagramms der Landesenergieversorgung verglichen, insbesondere hinsichtlich der Verteilung des Bahnenergiebedarfs auf Grund-, Mittel- und Spitzenlast sowie auf die verschiedenen Tages- und Nachtzeitzonen. Daraus werden Optimierungsvorschlaege abgeleitet. (orig.)

  12. Theoretical study on the combined systems of peanut-shaped carbon nanotubes encapsulated in single-walled carbon nanotubes

    International Nuclear Information System (INIS)

    Wang, Guo; Huang, Yuanhe

    2012-01-01

    Highlights: ► The combined systems of peanut-shaped carbon nanotubes encapsulated in single-walled carbon nanotubes are investigated. ► The band structures and related electronic properties are calculated by using crystal orbital method. ► The carrier mobility and mean free path are evaluated under the deformation potential theory. -- Abstract: The combined systems of peanut-shaped carbon nanotubes encapsulated in both semiconducting and metallic single-walled carbon nanotubes are investigated by using self-consistent field crystal orbital method based on the density functional theory. The investigation indicates that the interaction between the two constituents is mainly contributed by the π orbitals. The encapsulation does not change the semiconducting or metallic nature of the single-walled carbon nanotubes, but significantly changes the band dispersion and decreases the frontier band width of the metallic one. The carrier mobility and mean free path of the metallic single-walled carbon nanotube increase greatly after the encapsulation. The calculated mobilities have the order of 10 3 cm 2 V −1 s −1 for both of the semiconducting and metallic double-walled carbon nanotubes.

  13. Investigations of the ternary system beryllium-carbon-tungsten and analyses of beryllium on carbon surfaces

    International Nuclear Information System (INIS)

    Kost, Florian

    2009-01-01

    Beryllium, carbon and tungsten are planned to be used as first wall materials in the future fusion reactor ITER. The aim of this work is a characterization of mixed material formation induced by thermal load. To this end, model systems (layers) were prepared and investigated, which give insight into the basic physical and chemical concepts. Before investigating ternary systems, the first step was to analyze the binary systems Be/C and Be/W (bottom-up approach), where the differences between the substrates PG (pyrolytic graphite) and HOPG (highly oriented pyrolytic graphite) were of special interest. Particularly X-ray photoelectron spectroscopy (XPS), low energy ion scattering (ISS) and Rutherford backscattering spectroscopy (RBS) were used as analysis methods. Beryllium evaporated on carbon shows an island growth mode, whereas a closed layer can be assumed for layer thicknesses above 0.7 nm. Annealing of the Be/C system induces Be 2 C island formation for T≥770 K. At high temperatures (T≥1170 K), beryllium carbide dissociates, resulting in (metallic) beryllium desorption. For HOPG, carbide formation starts at higher temperatures compared to PG. Activation energies for the diffusion processes were determined by analyzing the decreasing beryllium amount versus annealing time. Surface morphologies were characterized using angle-resolved XPS (ARXPS) and atomic force microscopy (AFM). Experiments were performed to study processes in the Be/W system in the temperature range from 570 to 1270 K. Be 2 W formation starts at 670 K, a complete loss of Be 2 W is observed at 1170 K due to dissociation (and subsequent beryllium desorption). Regarding ternary systems, particularly Be/C/W and C/Be/W were investigated, attaching importance to layer thickness (reservoir) variations. At room temperature, Be 2 C, W 2 C, WC and Be 2 W formation at the respective interfaces was observed. Further Be 2 C is forming with increasing annealing temperatures. Depending on the layer

  14. Erwartete Messung der Z Produktionsrate mit dem CMS Detektor und Simulation des Tracker Laser Alignment Systems

    CERN Document Server

    Thomas, Maarten

    2009-01-01

    The Large Hadron Collider is a two-ring, superconducting accelerator and collider which can provide both proton and heavy-ion beams. First collisions are foreseen for 2009. The Compact Muon System (CMS) detector will measure the particles created in the hadron collisions and can confirm the Standard Model by establishing the existence of the Higgs boson, but also search for new phenomena. In order to provide a robust and precise track reconstruction, which can already be used in the High-Level Trigger systems, the positions of the silicon sensors in the CMS tracker have to been known with an accuracy of O(100µm). Therefore the CMS tracker has been equipped with a dedicated alignment system. The Laser Alignment System (LAS) aligns the tracker subdetectors with respect to each other and can also monitor the stability of the sensor positions during data taking. This study describes the implementation of a realistic simulation of the LAS in the CMS software framework (CMSSW) as well as the analysis of the first ...

  15. Coordinated subprojects of the Austrian forest damage monitoring system; Koordinierte Teilprojekte des Oesterr. Waldschaden-Beobachtungssystem

    Energy Technology Data Exchange (ETDEWEB)

    Pollanschuetz, J

    1993-12-31

    Any actions to preserve nature as the base of our survival needs to rely on knowledge about the condition of ecosystems and their `evolutionary` trends. A monitoring system ensuring timely detection of a critical `evolution` of forests as sensitive bio-indicators is an absolute must when addressing the global threat to our living environment. The Austrian forest damage monitoring system addresses this task. It involves subprojects and interdisciplinary studies integrated within this biomonitoring system to enhance our knowledge about and detection capabilities for forest diseases and injuries. (orig.) [Deutsch] Massnahmen zur Bewahrung der Natur als Lebensgrundlage setzen das Wissen ueber den Zustand der Oekosysteme und Kenntnisse ueber deren Entwicklung voraus. Ein Ueberwachungssystem das rechtzeitig kritische Entwicklung am sensiblen Bioindikator Wald erkennen laesst, ist angesichts der Anzeichen einer globalen Bedrohung der belebten Umwelt eine zwingende Selbstverstaendlichkeit. Mit dem Waldschaden-Beobachtungssystem wird diesen Aufgabenstellungen Rechnung getragen. Durch die in diesem Biomonitoring-System integrierten Teilprojekte und interdisziplinaeren Untersuchungen wird auch ein wesentlicher Beitrag zur Erkennung von Ursachen fuer Waldschaeden und Waldkrankheiten geleistet. (orig.)

  16. MRT of the locomotor system. 4. rev. and enl. ed.; MRT des Bewegungsapparats

    Energy Technology Data Exchange (ETDEWEB)

    Vahlensieck, Martin [Praxisnetz Radiologie und Nuklearmedizin Bonn Bad Godesberg - RheinSieg, Bonn (Germany); Reiser, Maximilian (ed.) [Klinikum Grosshadern, Muenchen (Germany). Inst. fuer Klinische Radiologie

    2015-02-01

    The book on MRT of the locomotor system covers the following topics: relevant NMT imaging techniques, spinal cord, shoulder, elbows, wrist and fingers, hip region, knee, lower leg - ankle - foot, temporomandibular joint, skeletal muscles, bone marrow, bone and soft tissue tumors, osteoporosis, sacroiliac joint, jaw and periodontium.

  17. Measures for the explosion protection for gas systems; Massnahmen des Explosionsschutzes fuer Gasanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Faber, Wolfgang [Thyssengas GmbH, Duisburg (Germany). Anlagentechnik Nord; Seemann, Albert [BG ETEM Berufsgenossenschaft Energie Textil Elektro Medienerzeugnisse, Koeln (Germany)

    2012-04-15

    In order to protect employees, technical and organizational measures for explosion protection have to be provided to gas plants with potentially explosive areas. These measures have to be documented in the explosion protection document in accordance with paragraph 6 section 1 of the regulation of industrial safety. The contribution under consideration presents an overview on the measures for explosion protection for gas systems.

  18. Theoretical evaluation of indoor radon control using a carbon adsorption system

    International Nuclear Information System (INIS)

    Bocanegra, R.; Hopke, P.K.

    1989-01-01

    The conceptual framework for a carbon-based adsorption system for the control of indoor radon is presented. Based on the adsorptivity of typically available activated carbons, it is shown theoretically that carbon bed adsorbers can be effective in lowering indoor radon levels particularly when the area of radon ingress (the basement) has a relatively low exchange rate with the rest of the house

  19. 76 FR 55846 - Hazardous Waste Management System: Identification and Listing of Hazardous Waste: Carbon Dioxide...

    Science.gov (United States)

    2011-09-09

    ... carbon dioxide (CO 2 ) streams that are hazardous from the definition of hazardous waste, provided these... management under the Resource Conservation and Recovery Act (RCRA) to conditionally exclude carbon dioxide... 2050-AG60 Hazardous Waste Management System: Identification and Listing of Hazardous Waste: Carbon...

  20. Onsite defluoridation system for drinking water treatment using calcium carbonate.

    Science.gov (United States)

    Wong, Elaine Y; Stenstrom, Michael K

    2018-06-15

    Fluoride in drinking water has several effects on teeth and bones. At concentrations of 1-1.5 mg/L, fluoride can strengthen enamel, improving dental health, but at concentrations above 1.5 to 4 mg/L can cause dental fluorosis. At concentrations of 4-10 mg/L, skeletal fluorosis can occur. There are many areas of the world that have excessive fluoride in drinking water, such as China, India, Sri Lanka, and the Rift Valley countries in Africa. Treatment solutions are needed, especially in poor areas where drinking water treatment plants are not available. On-site or individual treatment alternatives can be attractive if constructed from common materials and if simple enough to be constructed and maintained by users. Advanced on-site methods, such as under sink reserve osmosis units, can remove fluoride but are too expensive for developing areas. This paper investigates calcium carbonate as a cost effective sorbent for an onsite defluoridation drinking water system. Batch and column experiments were performed to characterize F - removal properties. Fluoride sorption was described by a Freundlich isotherm model, and it was found that the equilibrium time was approximately 3 h. Calcium carbonate was found to have comparable F - removal abilities as the commercial ion exchange resins and possessed higher removal effectiveness compared to calcium containing eggshells and seashells. It was also found that the anion Cl- did not compete with F - at typical drinking water concentrations, having little impact on the effectiveness of the treatment system. A fluoride removal system is proposed that can be used at home and can be maintained by users. Through this work, we can be a step closer to bringing safe drinking water to those that do not have access to it. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Modelisation des effets physico-techniques pour la conception des ...

    African Journals Online (AJOL)

    automatisation dans les installations industrielles a besoin d'une régulation automatique des commandes des processus technologiques pour lesquelles certaines contraintes sont à relever compte tenu des exigences des innovations scientifiques de ...

  2. Prospective life cycle carbon abatement for pyrolysis biochar systems in the UK

    International Nuclear Information System (INIS)

    Hammond, Jim; Shackley, Simon; Sohi, Saran; Brownsort, Peter

    2011-01-01

    Life cycle assessment (LCA) of slow pyrolysis biochar systems (PBS) in the UK for small, medium and large scale process chains and ten feedstocks was performed, assessing carbon abatement and electricity production. Pyrolysis biochar systems appear to offer greater carbon abatement than other bioenergy systems. Carbon abatement of 0.7-1.3 t CO 2 equivalent per oven dry tonne of feedstock processed was found. In terms of delivered energy, medium to large scale PBS abates 1.4-1.9 t CO 2 e/MWh, which compares to average carbon emissions of 0.05-0.30 t CO 2 e/MWh for other bioenergy systems. The largest contribution to PBS carbon abatement is from the feedstock carbon stabilised in biochar (40-50%), followed by the less certain indirect effects of biochar in the soil (25-40%)-mainly due to increase in soil organic carbon levels. Change in soil organic carbon levels was found to be a key sensitivity. Electricity production off-setting emissions from fossil fuels accounted for 10-25% of carbon abatement. The LCA suggests that provided 43% of the carbon in the biochar remains stable, PBS will out-perform direct combustion of biomass at 33% efficiency in terms of carbon abatement, even if there is no beneficial effect upon soil organic carbon levels from biochar application. - Research highlights: → Biochar systems offer greater carbon abatement than combustion or gasification. → Carbon abatement of 0.7-1.4t CO 2 e/dry tonne of feedstock processed was found. → Change in soil organic carbon stocks induced by biochar is the key sensitivity. → Biochar systems produce less electricity then combustion or gasification.

  3. Vecteurs Singuliers des Theories des Champs Conformes Minimales

    Science.gov (United States)

    Benoit, Louis

    des entiers positifs, p et q etant de meme parite, et p+q= 2. Les vecteurs singuliers | Psi_{p,q}> et |Psi_{m-p,m+2-q} > sont respectivement de poids h _{p,q}+pq/2 et h_ {p,q}+(m-p)(m+2-q)/2.. Les vecteurs singuliers ont une norme nulle et on doit les eliminer des representations pour que celles -ci soient unitaires. Cette elimination engendrent des equations (super-)differentielles qui dependent directement de la forme explicite des vecteurs singuliers et auxquelles doivent obeir les fonctions de correlations de la theorie. Ainsi la connaissance de ces vecteurs singuliers est intimement reliee au calcul des fonctions de correlation. Les equations definissant les vecteurs singuliers forment un systeme lineaire surdetermine dont le nombre d'equations est de l'ordre de N(pq), le nombre de partitions de l'entier pq. Puisque les vecteurs singuliers jouent un role capital en theorie conforme, il est naturel de chercher des formes explicites pour les vecteurs (ou pour des familles infinies de ceux -ci). Nous donnons ici la forme explicite pour la famille infinie de vecteurs singuliers ayant un de ses indices egal a 1, pour les algebres de Virasoro et de Neveu-Schwarz. Depuis ces decouvertes, d'autres techniques de construction des vecteurs singuliers ont ete developpees, dont celle de Bauer, Di Francesco, Itzykson et Zuber pour l'algebre de Virasoro qui reproduit directement l'expression explicite des vecteurs singuliers |Psi _{1,q}> et |Psi_{p,1}>. Ils ont utilise l'algebre des produits d'operateurs et la fusion entre representations irreductibles pour engendrer des relations de recurence produisant les vecteurs singuliers. Dans le dernier chapitre de cette these nous adaptons cet algorithme a la construction des vecteurs singuliers de l'algebre de Neveu-Schwarz.

  4. Adsorption of gaseous pollutants on activated carbon filters. Modelling of the coupled exchanges of heat and mass; Adsorption de polluants gazeux sur des filtres de charbon actif. Modelisation des echanges couples de matiere et de chaleur

    Energy Technology Data Exchange (ETDEWEB)

    Fiani, E.

    2000-01-27

    The aim of this work is to remove gasoline and odorous molecules vapors. Thermodynamics and kinetics studies have been carried out; they concern the fixation of representative gases on activated carbons. Hydrogen sulfide and n-butane are chosen to represent the odorous molecules. Different activated carbons are considered: only the adsorbent impregnated by KOH has satisfying performance. The adsorption of hydrocarbons on a granulated activated carbon is studied on four original devices specifically perfected for this work: gravimetry, calorimetry, thermal measurements and gaseous phase chromatography. The gravimetric measurements are coupled to thermal measurements inside the granulates. Strong temperature variations have then been observed inside a granulate during the adsorption. These experimental results have been taken into account to adapt the classical Langmuir kinetic model. This new model allows to predict all the curves: setting / internal temperature variation for the adsorption of the hydrocarbons alone. The competitive nature of the adsorption sites allows then to explain qualitatively the adsorption of binary mixtures of hydrocarbons. At last, the classical Langmuir model allows to explain correctly the thermodynamic results, for the hydrocarbons alone or in binary mixture. The proposed modelling allows then to treat both on a kinetic and thermodynamic way the case of a non isothermal adsorption at the scale of an activated carbon granulate and to predict the phenomena at the filter scale. (O.M.)

  5. Analysis of the carbon footprint of coastal protection systems

    NARCIS (Netherlands)

    Labrujere, A.L.; Verhagen, H.J.

    2012-01-01

    When calculating the Carbon Footprint for a product or service, a direct link is made between the total amount of consumed energy and the produced amount of carbon dioxide during production. For that reason calculating the carbon footprint of various alternatives is a very straightforward method to

  6. The DES Bright Arcs Survey: Hundreds of Candidate Strongly Lensed Galaxy Systems from the Dark Energy Survey Science Verification and Year 1 Observations

    Energy Technology Data Exchange (ETDEWEB)

    Diehl, H. T.; Buckley-Geer, E. J.; Lindgren, K. A.; Nord, B.; Gaitsch, H.; Gaitsch, S.; Lin, H.; Allam, S.; Odden, C.; Pellico, A.; Tucker, D. L.; Kuropatkin, N.; Soares-Santos, M. [Fermi National Accelerator Laboratory, P.O. Box 500, Batavia, IL 60510 (United States); Collett, T. E. [Institute of Cosmology and Gravitation, University of Portsmouth, Portsmouth, PO1 3FX (United Kingdom); Furlanetto, C.; Nightingale, J. [University of Nottingham, School of Physics and Astronomy, Nottingham NG7 2RD (United Kingdom); Gill, M. S. S. [SLAC National Accelerator Laboratory, Menlo Park, CA 94025 (United States); More, A. [Kavli IPMU (WPI), UTIAS, The University of Tokyo, Kashiwa, Chiba 277-8583 (Japan); Costa, L. N. da; Neto, A. Fausti, E-mail: diehl@fnal.gov [Laboratório Interinstitucional de e-Astronomia—LIneA, Rua Gal. José Cristino 77, Rio de Janeiro, RJ—20921-400 (Brazil); Collaboration: DES Collaboration; and others

    2017-09-01

    We report the results of searches for strong gravitational lens systems in the Dark Energy Survey (DES) Science Verification and Year 1 observations. The Science Verification data span approximately 250 sq. deg. with a median i -band limiting magnitude for extended objects (10 σ ) of 23.0. The Year 1 data span approximately 2000 sq. deg. and have an i -band limiting magnitude for extended objects (10 σ ) of 22.9. As these data sets are both wide and deep, they are particularly useful for identifying strong gravitational lens candidates. Potential strong gravitational lens candidate systems were initially identified based on a color and magnitude selection in the DES object catalogs or because the system is at the location of a previously identified galaxy cluster. Cutout images of potential candidates were then visually scanned using an object viewer and numerically ranked according to whether or not we judged them to be likely strong gravitational lens systems. Having scanned nearly 400,000 cutouts, we present 374 candidate strong lens systems, of which 348 are identified for the first time. We provide the R.A. and decl., the magnitudes and photometric properties of the lens and source objects, and the distance (radius) of the source(s) from the lens center for each system.

  7. Carbon Formation and Metal Dusting in Hot-Gas Cleanup Systems of Coal Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    Tortorelli, Peter F.; Judkins, Roddie R.; DeVan, Jackson H.; Wright, Ian G.

    1995-12-31

    There are several possible materials/systems degradation modes that result from gasification environments with appreciable carbon activities. These processes, which are not necessarily mutually exclusive, include carbon deposition, carburization, metal dusting, and CO disintegration of refractories. Carbon formation on solid surfaces occurs by deposition from gases in which the carbon activity (a sub C) exceeds unity. The presence of a carbon layer CO can directly affect gasifier performance by restricting gas flow, particularly in the hot gas filter, creating debris (that may be deposited elsewhere in the system or that may cause erosive damage of downstream components), and/or changing the catalytic activity of surfaces.

  8. Contribution to the automatic command in robotics - Application to the command by microprocessors of the articulated systems; Contribution a la commande automatique en robotique. Application a la commande par microprocesseurs des manipulateurs articules

    Energy Technology Data Exchange (ETDEWEB)

    Al Mouhamed, Mayez

    1982-01-29

    The first part of the present paper deals with the main methods of changing the coordinates for a general articulated system. After a definition of the coordinates changing, we propose a coordination system designed for easy programming of the movements. Its characteristic is to permit the action anywhere on the manipulated object. The second part deals with the force regulation problem. For this purpose we have developed a general force sensor. The informations delivered by the sensor are used by force regulators which are intended for the automatic assembly of subsystems. In the third part the dynamic problem of the articulated systems is exposed. We present a new method which allows to determine dynamic parameters from appropriate motions of the robot. These parameters are then used to implement the dynamic control. Several applications, using the powerful microprocessor INTEL 8086 and its arithmetic coprocessor 8087, are presented, in order to demonstrate the performances gained. (author) [French] Dans la premiere partie de ce memoire, nous exposons les principales methodes de changement de coordonnees pour un systeme articule general. Apres une definition adequate de ce dernier, nous proposons un systeme de coordination permettant une programmation facile des mouvements. Sa caracteristique est de prendre comme centre d'action un point quelconque de l'objet manipule. Dans la deuxieme partie, nous etudions la regulation en effort. Pour cela nous avons developpe un capteur de forces general. Les informations que delivre ce dernier sont utilisees par des regulateurs d'effort adaptes au contexte de l'assemblage automatique des pieces. Dans la troisieme partie, nous exposons une nouvelle methode de commande dynamique des systemes articules. Nous obtenons des parametres dynamiques du robot a partir de mouvements appropries. Ces derniers sont ensuite utilises dans l'elaboration des commandes. Des applications utilisant le microprocesseur INTEL 8086 avec son

  9. Le systeme d’information des reseaux de sante: la reorganisation de la medecine en e-sante

    Directory of Open Access Journals (Sweden)

    Maryline Margueritte

    2013-01-01

    Full Text Available Les réseaux de santé ont développé depuis plusieurs années des dispositifs permettant une prise en charge coordonnée des patients en France, tant sur les plans médical que médico-psycho-social et humain. Certains ont développé des dossiers de santé partagés informatisés permettant la mise en commun d’informations utiles à la coordination et à la continuité des soins. Depuis 2009 avec la réforme de l’hôpital on veut installer des modes de fonctionnement coopératifs entre les professionnels et avec les usagers du système de santé. La mise en œuvre d’un système d’information de santé pour assurer d’une part, la transversalité du processus métier avec le patient et d’autre part pouvoir mesurer les résultats médicaux et économiques de cette évolution d’un système complexe d’information. Dans ce contexte, les possibilités offertes par les technologies de l’information et de la communication (TIC permettent la mise en place d’applications favorisant une augmentation de la participation « on line » des citoyens. Le « virage ambulatoire » exporte la santé hors des murs. C’est une médecine innovante qui permet au patient de rester dans son « chez soi ». En France, ce re-engeneering repose sur quatre domaines : un dossier médical informatisé, une prise en charge collective par les professions médicales et paramédicales, une autonomisation et une mise en réseau du secteur de santé.

  10. Der Einfluss des mikrovaskulären Systems auf das Überleben eines Hauttransplantats

    OpenAIRE

    Motsch, Benjamin

    2017-01-01

    Transplantierte Organe benötigen eine zuverlässige Versorgung über das Gefäßsystem. Daher richtet diese Studie ihr Augenmerk darauf, ob eine Hemmung von Thrombozyten, sowohl allein als auch in Kombination mit einem mTOR-Hemmer, einen positiven Effekt auf die Ausprägung der mikrovaskulären Struktur in Hauttransplantaten bei einem allogenen Mausmodell hat. Für die Hauttransplantation wurde die Haut von C57BL6 (H-2b) als Spendertiere auf CBA/J(H-2k) Mäuse übertragen. Auf diese Weise wurde eine v...

  11. Etude theorique des phases de densite inhomogene dans les systemes a effet Hall quantique

    OpenAIRE

    GOERBIG , Mark Oliver

    2004-01-01

    Thèse en cotutelle : Fribourg et Paris-Sud XI; The issue of this thesis is the study of the different electron-solid and quantum-liquid phases, which are found in two-dimensional electron systems under a perpendicular magnetic field. The formation of these phases is due to the strong Coulomb repulsion between the electrons of a partially filled Landau level. The energy calculations of the thesis allow one to understand recent experimental investigations, which have revealed a non-monotonic be...

  12. The development of the brake system of the BMW 850i including ABS and ASC. Entwicklung des Bremssystems des BMW 850i einschliesslich ABS und ASC

    Energy Technology Data Exchange (ETDEWEB)

    Kraft, H.J.; Leffler, H.

    1990-02-01

    The brake system of the new BMW 850i is described in the following. The brake actuation takes place via an hydraulic brake booster. The disc brakes at front and rear axle are arranged in diagnonal brake split. The 4-channel ABS is fitted as standard equipment. The ABS control unit also incorporates the algorithm for the Automatic Stability Control System ASC or ASC+T. The ASC+T shows improved traction compared with the pure stability system ASC and is standard in the BMW 850i with manual gear box. The automatic gear box equipped BMW 850i are supplied with ASC, the ASC+T is available as an option. Both systems, the ASC and the ASC+T are described with special view on the electronical and hydraulical network in the car. A performance comparison of the ASC-systems completes the description. (orig.).

  13. Carbon budget of a marine phytoplankton-herbivore system with carbon-14 as a tracer

    International Nuclear Information System (INIS)

    Copping, A.E.; Lorenzen, C.J.

    1980-01-01

    Adult female and stage V Calanus pacificus were fed 14 C-labeled phytoplankton in the laboratory in the form of monospecific cultures and natural populations. A carbon budget was constructed by following the 14 C activity and the specific activity, over 48 h, in the phytoplankton, copepod, dissolved organic, dissolved inorganic, and fecal carbon compartments. The average incorporation of carbon into the copepod's body was 45% of the phytoplankton carbon available. Of the phytoplankton carbon, 27% appeared as dissolved organic carbon, 24% as dissolved inorganic carbon, and 3 to 4% in the form of fecal pellets. All of the tracer was recovered at the end of the experiments. The specific activity of the phytoplankton compartment was constant throughout each experiment. The other compartments had initial specific activities of zero, or close to zero, and increased throughout the experiment. In most experiments, the copepod specific activity equalled that of the phytoplankton at the end of 48 h, while the dissolved organic carbon, dissolved inorganic carbon, and fecal specific activities remained well below that of the phytoplankton

  14. 46 CFR 167.45-1 - Steam, carbon dioxide, and halon fire extinguishing systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Steam, carbon dioxide, and halon fire extinguishing....45-1 Steam, carbon dioxide, and halon fire extinguishing systems. (a) General requirements. (1...-extinguishing system. On such vessels contracted for prior to January 1, 1962, a steam smothering system may be...

  15. Membrane fluidization by alcohols inhibits DesK-DesR signalling in Bacillus subtilis.

    Science.gov (United States)

    Vaňousová, Kateřina; Beranová, Jana; Fišer, Radovan; Jemioła-Rzemińska, Malgorzata; Matyska Lišková, Petra; Cybulski, Larisa; Strzałka, Kazimierz; Konopásek, Ivo

    2018-03-01

    After cold shock, the Bacillus subtilis desaturase Des introduces double bonds into the fatty acids of existing membrane phospholipids. The synthesis of Des is regulated exclusively by the two-component system DesK/DesR; DesK serves as a sensor of the state of the membrane and triggers Des synthesis after a decrease in membrane fluidity. The aim of our work is to investigate the biophysical changes in the membrane that are able to affect the DesK signalling state. Using linear alcohols (ethanol, propanol, butanol, hexanol, octanol) and benzyl alcohol, we were able to suppress Des synthesis after a temperature downshift. The changes in the biophysical properties of the membrane caused by alcohol addition were followed using membrane fluorescent probes and differential scanning calorimetry. We found that the membrane fluidization induced by alcohols was reflected in an increased hydration at the lipid-water interface. This is associated with a decrease in DesK activity. The addition of alcohol mimics a temperature increase, which can be measured isothermically by fluorescence anisotropy. The effect of alcohols on the membrane periphery is in line with the concept of the mechanism by which two hydrophilic motifs located at opposite ends of the transmembrane region of DesK, which work as a molecular caliper, sense temperature-dependent variations in membrane properties. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Resetting dynamic behaviour of pipework systems; Recalage du comportement dynamique des reseaux de tuyauteries

    Energy Technology Data Exchange (ETDEWEB)

    Gaudin, M [Electricite de France (EDF), Direction des Etudes et Recherches, 92 - Clamart (France)

    1998-12-31

    Resetting models is applied to electricity generating plant pipework systems. A frequency approach to the problem is made in an original way thanks to the use of precise dynamic rigidity matrices. The method assumes two kinds of unknown: the usually processed mechanical characteristics (Young`s Modulus, density etc.) and new resetting parameters acting on the dynamic behaviour of unknown connections. As the latter have a very wide range of possible variation, they benefit from a change of variable which allows the assumptions formulated to be complied with. The minimized cost function is based on a error in load. The frequencies required for building it are automatically selected thanks to different tests on measurements. Minimization uses a sensitivity technique linked with a method of least standard squares. The method has been programmed in Fortran 90 within the CIRCUS code and tried out on various examples which were simulated and sound effects cases as well as an actual case. (author). 128 refs.

  17. Resetting dynamic behaviour of pipework systems; Recalage du comportement dynamique des reseaux de tuyauteries

    Energy Technology Data Exchange (ETDEWEB)

    Gaudin, M. [Electricite de France (EDF), Direction des Etudes et Recherches, 92 - Clamart (France)

    1997-12-31

    Resetting models is applied to electricity generating plant pipework systems. A frequency approach to the problem is made in an original way thanks to the use of precise dynamic rigidity matrices. The method assumes two kinds of unknown: the usually processed mechanical characteristics (Young`s Modulus, density etc.) and new resetting parameters acting on the dynamic behaviour of unknown connections. As the latter have a very wide range of possible variation, they benefit from a change of variable which allows the assumptions formulated to be complied with. The minimized cost function is based on a error in load. The frequencies required for building it are automatically selected thanks to different tests on measurements. Minimization uses a sensitivity technique linked with a method of least standard squares. The method has been programmed in Fortran 90 within the CIRCUS code and tried out on various examples which were simulated and sound effects cases as well as an actual case. (author). 128 refs.

  18. variabilite des productions et des revenus des exploitations

    African Journals Online (AJOL)

    3Centre de coopération internationale en recherche agronomique pour le développement (CIRAD), UMR Innovation,. Montpellier, France. Doubangolo COULIBALY, Email kone_b@yahoo.fr. RESUME. La durabilité des systèmes de production à base de coton dans un contexte de variabilité des prix aux producteurs et de ...

  19. Le devenir de la gestion traditionnelle des eaux apres l'envahissement des systemes modernes d'irrigation. Oasis de Boukais, Sud-Ouest algérien

    OpenAIRE

    CHERIF REZZOUG; BOUALEM REMINI; SAAD HAMOUDI

    2014-01-01

    The evolution of traditional water administration after the extension of modern irrigation systems. Oasis de Boukais, south - west of Algeria. One of the topics that touch the field of environment is undoubtedly the traditional catchment systems and the sharing of water in the oasis. The ancestral techniques such as wells to chadouf, quanat, Khettara and foggaras have protected the oasis and the man in the past. These t...

  20. Contribution to the study of proton elastic and inelastic scattering on {sup 12}C; Contribution a l'etude des diffusions elastiques et inelastiques des protons sur le carbone 12

    Energy Technology Data Exchange (ETDEWEB)

    Sadeghi, A

    1966-07-01

    The results of absolute measurements of cross sections for the scattering of protons by {sup 12}C to the two first excited levels are given. The measurements were made from 4.6 to 11.4 MeV at 17 angles for (p,p) and at 15 angles for (p,p') (1. excited level) as well as 8 angles for (p,p'') (2. excited level). A gaseous target with differential pumping was used. The elastic scattering was analyzed using the R-matrix theory with the optical model. Then a new analysis of both (p,p) and (p,p') was achieved using the coupled-wave formalism. The information on the levels of the compound nucleus was completed and was confirmed. (author) [French] Cette these rapporte le resultat de mesures absolues des sections efficaces de diffusion p,p et pp' (conduisant aux deux premiers niveaux excites) de protons par '1'2C. Ces mesures ont ete faites de 4,6 a 11,4 MeV, a 17 angles pour (p,p), a 15 angles pour pp' (1er niveau excite) et a 8 angles pour pp'' (2eme niveau excite). Une chambre a cible gazeuse avec pompage differentiel a ete utilisee. La diffusion elastique a ete analysee au moyen de la theorie de la matrice R avec modele optique pour (p,p). Cette analyse a ete reprise en meme temps que celle de la diffusion inelastique par l'emploi d'equations couplees. Les resultats anterieurs sur les niveaux du noyau compose ont ete confirmes et completes. (auteur)

  1. Structure and organisation of the environmental management system in interconnected power systems; Aufbau- und Ablauforganisation des Umweltmanagementsystems im Verbund

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, G.

    1997-12-31

    The article deals with the structure and organisation of an environmental managament system in an electricity supply enterprise (interconnected power system). The objectives, effects, significance and implementation are discussed. (SR)

  2. Absorption of carbon dioxide and isotope exchange rate of carbon in a reaction system between carbon dioxide and carbamic acid

    International Nuclear Information System (INIS)

    Takeshita, Kenji; Kitamoto, Asashi

    1985-01-01

    The performance of isotope separation of carbon-13 by chemical exchange between carbon dioxide and carbamic acid was studied. The working fluid used in the study was a solution of DNBA, (C 4 H 9 ) 2 NH and n-octane mixture. Factors related to the isotope exchange rate were measured, such as the absorption rate of carbon dioxide into the solution of DNBA and n-octane, the isotope exchange rate and the separation factor in the reaction between CO 2 and carbamic acid. The absorption of CO 2 into the working fluid was the sum of chemical absorption by DNBA and physical absorption by n-octane. The absorption of carbon dioxide into the working fluid was negligible at temperatures over 90 0 C, but increased gradually at lower temperatures. Carbon dioxide was absorbed into DNBA by chemical absorption, and DNBA was converted to carbamic acid by the reaction. The reaction for synthesis and decomposition of carbamic acid was reversible. The separation factor in equilibrium reached a large value at lower temperatures. The isotope exchange rate between gas and liquid was proportional to the product of the concentration of carbamic acid and the concentration of CO 2 by physical absorption. The isotope separation of carbon by chemical exchange reaction is better operated under the conditions of lower temperature and higher pressure. (author)

  3. Well materials durability in case of carbon dioxide and hydrogen sulphide geological sequestration; Durabilite des materiaux de puits petroliers dans le cadre d'une sequestration geologique de dioxyde de carbone et d'hydrogene sulfure

    Energy Technology Data Exchange (ETDEWEB)

    Jacquemet, N

    2006-01-15

    The geological sequestration of carbon dioxide (CO{sub 2}) and hydrogen sulphide (H{sub 2}S) is a promising solution for the long-term storage of these undesirable gases. It consists in injecting them via wells into deep geological reservoirs. The steel and cement employed in the well casing can be altered and provide pathways for leakage with subsequent human and environmental consequences. The materials ageing was investigated by laboratory experiments in geologically relevant P-T conditions. A new experimental and analysis procedure was designed for this purpose. A numerical approach was also done. The cement and steel were altered in various fluid phases at 500 bar-120 C and 500 bar-200 C: a brine, a brine saturated with H{sub 2}S-CO{sub 2}, a mixture of brine saturated with H{sub 2}S-CO{sub 2} and of supercritical H{sub 2}S-CO{sub 2} phase, a dry supercritical H{sub 2}S-CO{sub 2} phase without liquid water. In all cases, two distinct reactions are observed: the cement carbonation by the CO{sub 2} and the steel sulfidation by the H{sub 2}S. The carbonation and sulfidation are respectively maximal and minimal when they occur within the dry supercritical phase without liquid water. The textural and porosity properties of the cement are weakly affected by all the treatments at 120 C. The porosity even decreases in presence of H{sub 2}S-CO{sub 2}. But these properties are affected at 200 C when liquid water is present in the system. At this temperature, the initial properties are only preserved or improved by the treatments within the dry supercritical phase. The steel is corroded in all cases and thus is the vulnerable material of the wells. (author)

  4. Apparatus and method for removing solvent from carbon dioxide in resin recycling system

    Science.gov (United States)

    Bohnert, George W [Harrisonville, MO; Hand, Thomas E [Lee's Summit, MO; DeLaurentiis, Gary M [Jamestown, CA

    2009-01-06

    A two-step resin recycling system and method solvent that produces essentially contaminant-free synthetic resin material. The system and method includes one or more solvent wash vessels to expose resin particles to a solvent, the solvent contacting the resin particles in the one or more solvent wash vessels to substantially remove contaminants on the resin particles. A separator is provided to separate the solvent from the resin particles after removal from the one or more solvent wash vessels. The resin particles are next exposed to carbon dioxide in a closed loop carbon dioxide system. The closed loop system includes a carbon dioxide vessel where the carbon dioxide is exposed to the resin, substantially removing any residual solvent remaining on the resin particles after separation. A separation vessel is also provided to separate the solvent from the solvent laden carbon dioxide. Both the carbon dioxide and the solvent are reused after separation in the separation vessel.

  5. Carbon dioxide digital subtraction angiography using a new gas management system; Digitale Subtraktionsangiographie mit Kohlendioxid unter Verwendung eines neuen Gasdosiersystems

    Energy Technology Data Exchange (ETDEWEB)

    Schmitz-Rode, T.; Alzen, G.; Guenther, R.W. [Klinik fuer Radiologische Diagnostik, Universitaetsklinikum der RWTH Aachen (Germany)

    1997-07-01

    Purpose: The clinical evaluation of digital subtraction angiography with carbon dioxide using a newly developed low-tech CO{sub 2}-dosage- and injection system. Method and patients: The hand-held system (CO{sub 2} angio set) consists of a dosage chamber in connection with a special stopcock to apportion the gas. By optimising injection volume and pressure steady gas flow characteristics are approximated. A safety design prevents unintentional gas injection volume and pressure steady gas flow characteristics are approximated. A safety design prevents unintentional gas injection. CO{sub 2} arteriographies were performed on 185 patients. Main indications were renal insufficiency and a history of adverse reactions to iodinated contrast media. In patients with femoral connula access, catheterless reflux angiography was performed. Results: The injection system provided complete and coherent visualisation of the abdominal aorta, visceral, pelvic, and lower limb arteries via catheter (71 cases) or via femoral cannula using reflux technique (114 cases). Stenoses, occlusions, and collaterals were assessable. Employing the gas reflux over the aortic bifurcation bilateral run-off studies up to the calf trifurcation were performed via unilateral femoral cannula. Use of a dedicated stacking software improved image quality of distal femoral, popliteal and calf arteries. Conclusion: The CO{sub 2} management system allows adequate imaging of the arteries below the diaphragm. Ease and safety of use and low costs are advantageous. (orig.) [Deutsch] Ziel: Die klinische Erprobung der digitalen Subtraktionsangiographie mit Kohlendioxid unter Verwendung eines neuentwickelten, einfachen Gasdosier- und Injektionssystems. Methode und Patienten: Eine Dosierkammer mit einstellbarem Volumen in Verbindung mit einem Spezial-Hahn (CO{sub 2}-Angio-Set) portioniert das Gas. Durch Optimierung von Injektionsvolumen und -druck wurde eine konstante Ausstroemcharakteristik angenaehert. Das System wurde

  6. [Research progress on carbon sink function of agroforestry system under climate change].

    Science.gov (United States)

    Xie, Ting-Ting; Su, Pei-Xi; Zhou, Zi-Juan; Shan, Li-Shan

    2014-10-01

    As a land comprehensive utilization system, agroforestry system can absorb and fix CO2 effectively to increase carbon storage, and also reduces greenhouse effect convincingly while reaching the aim of harvest. The regulatory role in CO2 makes humans realize that agroforestry systems have significant superiority compared with single cropping systems, therefore, understanding the carbon sinks of different components in an agroforestry system and its influencing factors play an important role in studying global carbon cycle and accurate evaluation of carbon budget. This paper reviewed the concept and classification of agroforestry system, and then the carbon sequestration potentials of different components in agroforestry systems and influencing factors. It was concluded that the carbon sequestration rate of plants from different agroforestry systems in different regions are highly variable, ranging from 0.59 to 11.08 t C · hm(-2) · a(-1), and it is mainly influenced by climatic factors and the characteristics of agroforestry systems (species composition, tree density and stand age). The soil C sequestration of any agroforestry system is influenced by the amount and quality of biomass input provided by tree and nontree components of the system and the soil properties such as soil texture and soil structure. Overall the amount of carbon storage in any agroforestry system depends on the structure and function of its each component. The future studies should focus on the carbon sink functions of structurally optimized agroforestry systems, the temporal variation and spatial distribution pattern of carbon storage in agroforestry system and its carbon sequestration mechanism in a long time.

  7. Process systems engineering issues and applications towards reducing carbon dioxide emissions through conversion technologies

    DEFF Research Database (Denmark)

    Roh, Kosan; Frauzem, Rebecca; Gani, Rafiqul

    2016-01-01

    This paper reviews issues and applications for design of sustainable carbon dioxide conversion processes, specifically through chemical conversion, and the integration of the conversion processes with other systems from a process systems engineering (PSE) view-point. Systematic and computer......-aided methods and tools for reaction network generation, processing route generation, process design/optimization, and sustainability analysis are reviewed with respect to carbon dioxide conversion. Also, the relevant gaps and opportunities are highlighted. In addition, the integration of carbon dioxide...

  8. Glossaire des sigles

    OpenAIRE

    2015-01-01

    ABM Anti-ballistic missile = Missile antimissile balistique AGM Air-to-ground missile = Missile air-sol AIEA Agence Internationale de l’Energie Atomique ALCM Air-launched cruise missile = Missile de croisière air-sol ANSEA Association des Nations du Sud-Est asiatique ANT* Arme nucléaire tactique ASAT Anti-satellite = Arme antisatellite ASW Anti-submarine warfare = Guerre anti-sous-marine AWACS Airborne warning and control system = Système aérien de contrôle et d’alerte BMD Ballistic missile d...

  9. Novel permeable pavement systems utilising carbon-negative\\ud aggregate

    OpenAIRE

    Tota-Maharaj, Kiran; Monrose, John; Hills, Colin

    2017-01-01

    The use of commercially produced Carbon-Negative aggregates from Carbon8 (a British company which applies patented Accelerated Carbonation Technology (ACT) to solidify waste residues producing useful eco-friendly aggregates) is being investigated in the Caribbean islands of Trinidad, Tobago and St. Lucia. Typical construction of the subbase layer of pavements in the Caribbean include layers of virgin aggregate material (gravel, pea gravel) on which the base course layer is located. These mate...

  10. Integrated biomass energy systems and emissions of carbon dioxide

    International Nuclear Information System (INIS)

    Boman, U.R.; Turnbull, J.H.

    1997-01-01

    Electric Power Research Institute (EPRI) and the US Department of Energy (DOE) have been funding a number of case studies under the initiative entitled ''Economic Development through Biomass Systems Integration'', with the objective of investigating the feasibility of integrated biomass energy systems utilizing a dedicated feedstock supply system (DFSS) for energy production. This paper deals with the full fuel cycle for four of these case studies, which have been examined with regard to the emissions of carbon dioxide., CO 2 . Although the conversion of biomass to electricity in itself does not emit more CO 2 than is captured by the biomass through photosynthesis, there will be some CO 2 emissions from the DFSS. External energy is required for the production and transportation of the biomass feedstock, and this energy is mainly based on fossil fuels. By using this input energy, CO 2 and other greenhouse gases are emitted. However, by utilizing biomass with fossil fuels as external input fuels, we would get about 10-15 times more electric energy per unit fossil fuel, compared with a 100% coal power system. By introducing a DFSS on former farmland the amount of energy spent for production of crops can be reduced, the amount of fertilizers can be decreased, the soil can be improved and a significant amount of energy will be produced compared with an ordinary farm crop. Compared with traditional coal-based electricity production, the CO 2 emissions are in the most cases reduced significantly by as much as 95%. The important conclusion is the great potential for reducing greenhouse gas emissions through the offset of coal by biomass. (author)

  11. Commissioning and proof of functionality of the OPERA precision tracker, especially of the time measuring system; Inbetriebnahme und Funktionsnachweis des OPERA Precision Trackers insbesondere des Zeitmesssystems

    Energy Technology Data Exchange (ETDEWEB)

    Janutta, Benjamin

    2008-10-15

    The commissioning and the proof of functionality of the Precision Tracker of the OPERA experiment is subject of this thesis. The timing system of the precision tracker is of major concern here. At first the time.resolution of the timing electronics was characterized additionally general running parameters were studied. Afterwards the installation and commissioning were carried out. The precision tracker is supposed to determine the momentum of throughgoing myons with an accuracy of {delta}p/p<0.25 as well as the sign of their charge. The commissioning is finished by now and it was shown, that the data acquisition system runs very reliable and only 1.5% show an slightly higher number of hits. The nominal spatial track resolution of {sigma}<600 {mu}m was also reached. (orig.)

  12. Aile adaptable : Design du systeme d'actionnement de l'aileron rigide, caracterisation des capteurs de pression et instrumentation pour des tests statiques =

    Science.gov (United States)

    Vincent, Jean-Baptiste

    This Master's thesis is part of a multidisciplinary optimisation project initiated by the Consortium for Research and Innovation in Aerospace in Quebec (CRIAQ) ; this project is about designing and manufacturing a morphing wing demonstrator. The morphing design adopted in this project is based on airfoil thickness variation applied to the upper skin. This morphing generates a change in the laminar to turbulent boundary layer transition position on top of the wing. The position of this transition area leads to significant changes in the aerodynamic performance of the wing. The study presented here focuses on the design of the conventional aileron actuation system and on the characterization of the high sensitivity differential pressure sensors installed on the upper skin in order to determine the laminar to turbulent transition position. Furthermore, the study focuses on the data acquisition system for the morphing wing structural test validation. The aileron actuation system is based on a linear actuator actuated by a brushless motor. The component choice is presented as well as the command method. A static validation as well as wind tunnel validation is presented. The pressure sensor characterization is performed by installing three of those high sensitivity differential pressure sensors in a bi-dimensional known airfoil. This study goes through the process of determining the sensor position in order to observe the transition area by using a computational fluid dynamics (CFD) statistic approach. The validation of the laminar to turbulent transition position is carried out with a series of wind tunnel tests. A structural test has been executed in order to validate the wing structure. This Master's thesis shows the data acquisition system for the microstrain measurement installed inside the morphing wing. A hardware and software architecture description is developed and presented as well as the practical results.

  13. TPR system: a powerful technique to monitor carbon nanotube formation during chemical vapour deposition

    International Nuclear Information System (INIS)

    Tristao, Juliana Cristina; Moura, Flavia Cristina Camilo; Lago, Rochel Montero; Sapag, Karim

    2010-01-01

    In this work, a TPR (Temperature Programmed Reduction) system is used as a powerful tool to monitor carbon nanotubes production during CVD (Chemical Vapour Deposition), The experiments were carried out using catalyst precursors based on Fe-Mo supported on Al 2 O 3 and methane as carbon source. As methane reacts on the Fe metal surface, carbon is deposited and H2 is produced. TPR is very sensitive to the presence of H2 and affords information on the temperature where catalyst is active to form different forms of carbon, the reaction kinetics, the catalyst deactivation and carbon yields. (author)

  14. A national look at carbon capture and storage-National carbon sequestration database and geographical information system (NatCarb)

    Science.gov (United States)

    Carr, T.R.; Iqbal, A.; Callaghan, N.; ,; Look, K.; Saving, S.; Nelson, K.

    2009-01-01

    The US Department of Energy's Regional Carbon Sequestration Partnerships (RCSPs) are responsible for generating geospatial data for the maps displayed in the Carbon Sequestration Atlas of the United States and Canada. Key geospatial data (carbon sources, potential storage sites, transportation, land use, etc.) are required for the Atlas, and for efficient implementation of carbon sequestration on a national and regional scale. The National Carbon Sequestration Database and Geographical Information System (NatCarb) is a relational database and geographic information system (GIS) that integrates carbon storage data generated and maintained by the RCSPs and various other sources. The purpose of NatCarb is to provide a national view of the carbon capture and storage potential in the U.S. and Canada. The digital spatial database allows users to estimate the amount of CO2 emitted by sources (such as power plants, refineries and other fossil-fuel-consuming industries) in relation to geologic formations that can provide safe, secure storage sites over long periods of time. The NatCarb project is working to provide all stakeholders with improved online tools for the display and analysis of CO2 carbon capture and storage data. NatCarb is organizing and enhancing the critical information about CO2 sources and developing the technology needed to access, query, model, analyze, display, and distribute natural resource data related to carbon management. Data are generated, maintained and enhanced locally at the RCSP level, or at specialized data warehouses, and assembled, accessed, and analyzed in real-time through a single geoportal. NatCarb is a functional demonstration of distributed data-management systems that cross the boundaries between institutions and geographic areas. It forms the first step toward a functioning National Carbon Cyberinfrastructure (NCCI). NatCarb provides access to first-order information to evaluate the costs, economic potential and societal issues of

  15. Intégration des Tice et apprentissage de l'enseignement : une approche systémique Integrating technology and learning to teach: a systemic perspective

    Directory of Open Access Journals (Sweden)

    Francis Bangou

    2006-11-01

    Full Text Available De nombreuses études soulignent à quel point il est complexe d'analyser les changements pédagogiques entraînés par l'intégration des Tice. Cette recherche-action tente d'analyser de façon systémique les interrelations qu'entretient l'intégration des Tice avec les changements pédagogiques dans le cadre d'un programme de formation d'enseignants en langues étrangères au sein d'une grande université américaine. Le cadre théorique nous permettra tout d'abord de délimiter une perspective systémique et de présenter notre conception de l'intégration des Tice et de l'apprentissage. Puis, nous présenterons notre étude et en résumerons les principaux résultats afin d'illustrer la complexité d'une telle relation.Many studies underline how difficult it is to analyse the pedagogical changes caused by the integration of technology. This action research aims to analyse, from a systemic point of view, the interrelations that exist between the integration of technology and pedagogical change. The study took place in a foreign and second language teacher education program at a large American university. First, we will define a systemic perspective as well as the concepts of technology integration and learning. Then, to illustrate the complexity of such relationship, we will describe our study and summarize the main results.

  16. Electromagnetic Effects of (Carbon) Composite Materials Upon Avionics Systems

    Science.gov (United States)

    1980-10-01

    travail. La tenue A Il’humiditd est en effet la preoccupation majcure des utilisateurs de plastiques arm~s, la manifestation essontielle du...Resizing The mass saving described in te.e previous piragraph would, if applied to an all-metal concept , result in an improved aircraft performance in terms...8217 - " -;" r 3-10 Fig.7 CFC, items for future concepts TITANIUM WING/FUSELAGE I’ I~ ATTACHM4ENT FITTING TORSION BOX: ~ ~ ~ ,- C.RC SKINS, SPARS it.\\~ U h

  17. Improved Mask Protected DES using RSA Algorithm

    Directory of Open Access Journals (Sweden)

    Asha Latha S.

    2016-01-01

    Full Text Available The data encryption standard is a pioneering and farsighted standard which helped to set a new paradigm for encryption standards. But now DES is considered to be insecure for some application. Asymmetric mask protected DES is an advanced encryption method for effectively protecting the advanced DES. There are still probabilities to improve its security. This paper propose a method, which introduce a RSA key generation scheme in mask protected DES instead of plain key, which result in enhancement in the security of present asymmetric mask protected DES. We further propose a Vedic mathematical method of RSA implementation which reduce the complexity of computation in RSA block thereby resulting in reduced delay (four timesthat improves the performance of overall system. The software implementation was performed using Xilinx 13.2 and Model-Sim was used for the simulation environment.

  18. Mobile Carbon Monoxide Monitoring System Based on Arduino-Matlab for Environmental Monitoring Application

    Science.gov (United States)

    Azieda Mohd Bakri, Nur; Junid, Syed Abdul Mutalib Al; Razak, Abdul Hadi Abdul; Idros, Mohd Faizul Md; Karimi Halim, Abdul

    2015-11-01

    Nowadays, the increasing level of carbon monoxide globally has become a serious environmental issue which has been highlighted in most of the country globally. The monitoring of carbon monoxide content is one of the approaches to identify the level of carbon monoxide pollution towards providing the solution for control the level of carbon monoxide produced. Thus, this paper proposed a mobile carbon monoxide monitoring system for measuring the carbon monoxide content based on Arduino-Matlab General User Interface (GUI). The objective of this project is to design, develop and implement the real-time mobile carbon monoxide sensor system and interfacing for measuring the level of carbon monoxide contamination in real environment. Four phases or stages of work have been carried out for the accomplishment of the project, which classified as sensor development, controlling and integrating sensor, data collection and data analysis. As a result, a complete design and developed system has been verified with the handheld industrial standard carbon monoxide sensor for calibrating the sensor sensitivity and measurement in the laboratory. Moreover, the system has been tested in real environments by measuring the level of carbon monoxide in three different lands used location; industrial area; residential area and main road (commercial area). In this real environment test, the industrial area recorded the highest reading with 71.23 ppm and 82.59 ppm for sensor 1 and sensor 2 respectively. As a conclusion, the mobile realtime carbon monoxide system based on the Arduino-Matlab is the best approach to measure the carbon monoxide concentration in different land-used since it does not require a manual data collection and reduce the complexity of the existing carbon monoxide level concentration measurement practise at the same time with a complete data analysis facilities.

  19. Quantifying Carbon and distributional benefits of solar home system programs in Bangladesh

    OpenAIRE

    Wang, Limin; Bandyopadhyay, Sushenjit; Cosgrove-Davies, Mac; Samad, Hussain

    2011-01-01

    Scaling-up adoption of renewable energy technology, such as solar home systems, to expand electricity access in developing countries can accelerate the transition to low-carbon economic development. Using a purposely collected national household survey, this study quantifies the carbon and distributional benefits of solar home system programs in Bangladesh. Three key findings are generated...

  20. 21 CFR 862.1160 - Bicarbonate/carbon dioxide test system.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bicarbonate/carbon dioxide test system. 862.1160 Section 862.1160 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test Systems § 862.1160 Bicarbonate/carbon dioxide...

  1. Operational flexibility and economics of power plants in future low-carbon power systems

    NARCIS (Netherlands)

    Brouwer, Anne Sjoerd; van den Broek, Machteld; Seebregts, Ad; Faaij, André

    2015-01-01

    Future power systems will require large shares of low-carbon generators such as renewables and power plants with Carbon Capture and Storage (CCS) to keep global warming below 2. °C. Intermittent renewables increase the system-wide demand for flexibility and affect the operation of thermal power

  2. Le devenir de la gestion traditionnelle des eaux apres l'envahissement des systemes modernes d'irrigation. Oasis de Boukais, Sud-Ouest algérien

    Directory of Open Access Journals (Sweden)

    CHERIF REZZOUG

    2014-11-01

    Full Text Available The evolution of traditional water administration after the extension of modern irrigation systems. Oasis de Boukais, south - west of Algeria. One of the topics that touch the field of environment is undoubtedly the traditional catchment systems and the sharing of water in the oasis. The ancestral techniques such as wells to chadouf, quanat, Khettara and foggaras have protected the oasis and the man in the past. These techniques were used in an arid environment by oasis dwellers and have stood a hostile climate f or centuries. In spite of the low rainfall recorded in the region of our oasis, the oasis dwellers of Boukais through their intelligence, they were able to cultivate their lands without disrupting the fragile ecosystem by groundwater exploitation due to gu shing from a s ource (Ain. For centuries, the oasis dwellers of Boukais use techniques and rules respected by all the farmers to irrigate their fields and palms trees. They exploit the artesian spring through canals to open sky called séguias and accumulat ion basin (majen for the storage of water in the night.

  3. Civili, langue des Baloango

    DEFF Research Database (Denmark)

    Mavoungou, Paul Achille; Ndinga-Koumba-Binza, Hugues Steve

    , Congo, Angola, etc.) issus de la décolonisation. Il présente de façon succincte quelques phénomènes historiques, phonologiques, morphosyntaxiques, homonymiques et analogiques de la langue. Des faits sémantiques des emprunts linguistiques y sont également décrits dans le cadre des changements...

  4. The Carbon Dioxide System in the Baltic Sea Surface Waters

    Energy Technology Data Exchange (ETDEWEB)

    Wesslander, Karin

    2011-05-15

    The concentration of carbon dioxide (CO{sub 2}) in the atmosphere is steadily increasing because of human activities such as fossil fuel burning. To understand how this is affecting the planet, several pieces of knowledge of the CO{sub 2} system have to be investigated. One piece is how the coastal seas, which are used by people and influenced by industrialization, are functioning. In this thesis, the CO{sub 2} system in the Baltic Sea surface water has been investigated using observations from the last century to the present. The Baltic Sea is characterized of a restricted water exchange with the open ocean and a large inflow of river water. The CO{sub 2} system, including parameters such as pH and partial pressure of CO{sub 2} (pCO{sub 2}), has large seasonal and inter-annual variability in the Baltic Sea. These parameters are affected by several processes, such as air-sea gas exchange, physical mixing, and biological processes. Inorganic carbon is assimilated in the primary production and pCO{sub 2} declines to approx150 muatm in summer. In winter, pCO{sub 2} levels increase because of prevailing mineralization and mixing processes. The wind-mixed surface layer deepens to the halocline (approx60 m) and brings CO{sub 2}- enriched water to the surface. Winter pCO{sub 2} may be as high as 600 muatm in the surface water. The CO{sub 2} system is also exposed to short-term variations caused by the daily biological cycle and physical events such as upwelling. A cruise was made in the central Baltic Sea to make synoptic measurements of oceanographic, chemical, and meteorological parameters with high temporal resolution. Large short-term variations were found in pCO{sub 2} and oxygen (O{sub 2}), which were highly correlated. The diurnal variation of pCO{sub 2} was up to 40 muatm. The CO{sub 2} system in the Baltic Sea changed as the industrialization increased around 1950, which was demonstrated using a coupled physical-biogeochemical model of the CO{sub 2} system

  5. Operation safety of control systems. Principles and methods; Surete de fonctionnement des systemes de commande. Principes et methodes

    Energy Technology Data Exchange (ETDEWEB)

    Aubry, J.F. [Institut National Polytechnique, 54 - Nancy (France); Chatelet, E. [Universite de Technologie de Troyes, 10 (France)

    2008-09-15

    This article presents the main operation safety methods that can be implemented to design safe control systems taking into account the behaviour of the different components with each other (binary 'operation/failure' behaviours, non-consistent behaviours and 'hidden' failures, dynamical behaviours and temporal aspects etc). To take into account these different behaviours, advanced qualitative and quantitative methods have to be used which are described in this article: 1 - qualitative methods of analysis: functional analysis, preliminary risk analysis, failure mode and failure effects analyses; 2 - quantitative study of systems operation safety: binary representation models, state space-based methods, event space-based methods; 3 - application to the design of control systems: safe specifications of a control system, qualitative analysis of operation safety, quantitative analysis, example of application; 4 - conclusion. (J.S.)

  6. Carbon emission and sequestration of urban turfgrass systems in Hong Kong

    Energy Technology Data Exchange (ETDEWEB)

    Kong, Ling [School of Life Sciences, The Chinese University of Hong Kong, Shatin, N.T., Hong Kong (China); Shi, Zhengjun [Shenzhen Key Laboratory of Southern Subtropical Plant Diversity, Fairy Lake Botanical Garden, Shenzhen and Chinese Academy of Science, Shenzhen (China); Chu, L.M., E-mail: leemanchu@cuhk.edu.hk [School of Life Sciences, The Chinese University of Hong Kong, Shatin, N.T., Hong Kong (China)

    2014-03-01

    Climate change is more than just a global issue. Locally released carbon dioxide may lead to a rise in global ambient temperature and influence the surrounding climate. Urban greenery may mitigate this as they can remove carbon dioxide by storing carbon in substrates and vegetation. On the other hand, urban greenery systems which are under intense management and maintenance may contribute to the emission of carbon dioxide or other greenhouse gases. The impact of urban greenery on carbon balance in major metropolitan areas thus remains controversial. We investigated the carbon footprints of urban turf operation and maintenance by conducting a research questionnaire on different Hong Kong turfs in 2012, and showed that turf maintenance contributed 0.17 to 0.63 kg Ce m{sup −2} y{sup −1} to carbon emissions. We also determined the carbon storage of turfs at 0.05 to 0.21 kg C m{sup −2} for aboveground grass biomass and 1.26 to 4.89 kg C m{sup −2} for soils (to 15 cm depth). We estimated that the carbon sink capacity of turfs could be offset by carbon emissions in 5–24 years under current management patterns, shifting from carbon sink to carbon source. Our study suggested that maintenance management played a key role in the carbon budget and footprint of urban greeneries. The environmental impact of turfgrass systems can be optimized by shifting away from empirically designed maintenance schedules towards rational ones based on carbon sink and emission principles. - Highlights: • Carbon storage capacity at 0.05 to 0.21 kg C m{sup −2} for grasses and 1.26 to 4.89 kg C m{sup −2} for soils (to 15 cm depth). • Turf maintenance contributed to carbon emissions at 0.17 to 0.63 kg Ce (carbon equivalent) m{sup −2} y{sup −1}. • Turf system respiration was negatively correlated with soil carbon capacity but only in the wet season. • Carbon stored in turfs could be offset by maintenance carbon emissions in 5–24 years.

  7. Carbon emission and sequestration of urban turfgrass systems in Hong Kong

    International Nuclear Information System (INIS)

    Kong, Ling; Shi, Zhengjun; Chu, L.M.

    2014-01-01

    Climate change is more than just a global issue. Locally released carbon dioxide may lead to a rise in global ambient temperature and influence the surrounding climate. Urban greenery may mitigate this as they can remove carbon dioxide by storing carbon in substrates and vegetation. On the other hand, urban greenery systems which are under intense management and maintenance may contribute to the emission of carbon dioxide or other greenhouse gases. The impact of urban greenery on carbon balance in major metropolitan areas thus remains controversial. We investigated the carbon footprints of urban turf operation and maintenance by conducting a research questionnaire on different Hong Kong turfs in 2012, and showed that turf maintenance contributed 0.17 to 0.63 kg Ce m −2 y −1 to carbon emissions. We also determined the carbon storage of turfs at 0.05 to 0.21 kg C m −2 for aboveground grass biomass and 1.26 to 4.89 kg C m −2 for soils (to 15 cm depth). We estimated that the carbon sink capacity of turfs could be offset by carbon emissions in 5–24 years under current management patterns, shifting from carbon sink to carbon source. Our study suggested that maintenance management played a key role in the carbon budget and footprint of urban greeneries. The environmental impact of turfgrass systems can be optimized by shifting away from empirically designed maintenance schedules towards rational ones based on carbon sink and emission principles. - Highlights: • Carbon storage capacity at 0.05 to 0.21 kg C m −2 for grasses and 1.26 to 4.89 kg C m −2 for soils (to 15 cm depth). • Turf maintenance contributed to carbon emissions at 0.17 to 0.63 kg Ce (carbon equivalent) m −2 y −1 . • Turf system respiration was negatively correlated with soil carbon capacity but only in the wet season. • Carbon stored in turfs could be offset by maintenance carbon emissions in 5–24 years

  8. Carbon balances during land conversion in early bioenergy systems

    Science.gov (United States)

    Zenone, T.; Chen, J.; Gelfand, I.; Robertson, G. P.; Hamilton, S. K.

    2012-12-01

    In this study, we established a field experiment and deployed seven eddy-covariance towers to quantify the roles of land use change and the subsequent carbon (C) balances of three different bioenergy systems (corn, switchgrass, and mixed prairie species) that were developed from two historical land use types: monocultural grasslands dominated by smooth brome (Bromus inermis Leyss) and lands in the Conservation Reserve Program (CRP). Three CRP fields and three cropland fields were converted to soybean in 2009 (conversion year) before establishing the cellulosic biofuel cropping systems in 2010 (establishment year). A CRP perennial grassland site was kept undisturbed as a reference. Conversion of CRP to soybean induced net C emissions during the conversion year (134 -262 g C m-2 yr-1), while in the same year the net C balance at the CRP grassland reference was -35 g C m-2 yr-1 (i.e., net C sequestration). The establishment of switchgrass and mixed prairie induced a cumulative C balance of -113 g C m-2 (switchgrass from CRP), 250 g C m-2 (switchgrass from cropland), 706 g C m-2 (mixed prairie from CRP), and 59 g C m-2 (mixed prairie from cropland) over the three-year study period. The cumulative three-year C balance of corn converted from CRP and from cropland was -151 g C m-2 and -183 g C m-2, respectively. Eddy flux measurements during cellulosic biofuel crop establishment reveal annual changes in C balance that cannot be detected using conventional mass balance approaches. When end-use of harvested biomass was considered, the C balances for all studied systems, except the reference site, exhibited large C emissions ranging from 150 to 990 g C m-2 over the three-year conversion phase.

  9. Unique effect of mechanical crushing on the electrochemical intercalation of lithium in carbons of different morphologies; Effet unique du broyage mecanique sur l`intercalation electrochimique du lithium dans des carbones de morphologies differentes

    Energy Technology Data Exchange (ETDEWEB)

    Salver-Disma, F.; Tarascon, J.M. [Universite de Picardie, 80 - Amiens (France)

    1996-12-31

    Lithium ion batteries use an oxide as a positive electrode and a carbon material as a negative electrode. The performances of carbon electrodes have rapidly evolved during the last years thanks to the substitution of soft carbons of Conoco or MCMB-2510 type by graphites (F-399, MCMB-2528) and then by hard carbons. These high capacity carbons (700 mAh/g) have higher service life and volume capacity than graphites but their irreversible losses are greater (>20%). In this work, materials with similar electrochemical performances are prepared by mechanical crushing. Mechanical crushing allows to obtain a wide range of carbon materials with various morphologies, specific surfaces and levels of disorder. The formation of the passivation film is directly linked with the surface of materials. A reaction scheme of the reversible and irreversible capacities has been defined and has permitted to obtain compounds with reversible capacities of 720 mAh/g (2 lithium for 6 carbon). (J.S.)

  10. Unique effect of mechanical crushing on the electrochemical intercalation of lithium in carbons of different morphologies; Effet unique du broyage mecanique sur l`intercalation electrochimique du lithium dans des carbones de morphologies differentes

    Energy Technology Data Exchange (ETDEWEB)

    Salver-Disma, F; Tarascon, J M [Universite de Picardie, 80 - Amiens (France)

    1997-12-31

    Lithium ion batteries use an oxide as a positive electrode and a carbon material as a negative electrode. The performances of carbon electrodes have rapidly evolved during the last years thanks to the substitution of soft carbons of Conoco or MCMB-2510 type by graphites (F-399, MCMB-2528) and then by hard carbons. These high capacity carbons (700 mAh/g) have higher service life and volume capacity than graphites but their irreversible losses are greater (>20%). In this work, materials with similar electrochemical performances are prepared by mechanical crushing. Mechanical crushing allows to obtain a wide range of carbon materials with various morphologies, specific surfaces and levels of disorder. The formation of the passivation film is directly linked with the surface of materials. A reaction scheme of the reversible and irreversible capacities has been defined and has permitted to obtain compounds with reversible capacities of 720 mAh/g (2 lithium for 6 carbon). (J.S.)

  11. Soil carbon management in large-scale Earth system modelling

    DEFF Research Database (Denmark)

    Olin, S.; Lindeskog, M.; Pugh, T. A. M.

    2015-01-01

    , carbon sequestration and nitrogen leaching from croplands are evaluated and discussed. Compared to the version of LPJ-GUESS that does not include land-use dynamics, estimates of soil carbon stocks and nitrogen leaching from terrestrial to aquatic ecosystems were improved. Our model experiments allow us...

  12. Carbon sequestration potential for forage and pasture systems

    Science.gov (United States)

    Grassland soils represent a large reservoir of organic and inorganic carbon. Regionally, grasslands are annual CO2 sources or sinks depending on crop and soil management, current soil organic carbon (SOC) concentration and climate. Land management changes (LMC) impact SOC sequestration rate, the du...

  13. Policies and initiatives for carbon neutrality in nordic heating and transport systems

    DEFF Research Database (Denmark)

    Muller, Jakob Glarbo; Wu, Qiuwei; Ostergaard, Jacob

    2012-01-01

    Policies and initiatives promoting carbon neutrality in the Nordic heating and transport systems are presented. The focus within heating systems is the propagation of heat pumps while the focus within transport systems is initiatives regarding electric vehicles (EVs). It is found that conversion...... to heat pumps in the Nordic region rely on both private economic and national economic incentives. Initiatives toward carbon neutrality in the transport system are mostly concentrated on research, development and demonstration for deployment of a large number of EVs. All Nordic countries have plans...... for the future heating and transport systems with the ambition of realizing carbon neutrality....

  14. Des racines et des ailes

    Directory of Open Access Journals (Sweden)

    Stéphanie Vincent-Geslin

    2012-05-01

    Full Text Available Les mobilités pendulaires semblent être en augmentation en Europe depuis une dizaine d’années. Cette croissance du temps passé à se déplacer amène à remettre en question la conjecture de Zahavi et apparaît relativement inexplicable en regard du paradigme classique de l’acteur rationnel traditionnellement utilisé dans le champ des transports. Si, dans la littérature, les temps de déplacements sont principalement expliqués par le contexte résidentiel, la forme urbaine et le travail, ce cadre explicatif ne dit rien des processus de décision eux-mêmes qui amènent aux pendularités intensives.À partir d’une enquête qualitative menée auprès de pendulaires français, suisses et belges, cette contribution propose d’analyser les arbitrages et les éléments déterminants des processus de la grande pendularité. Les mobilités quotidiennes pendulaires apparaissent comme le résultat de compromis entre activité professionnelle, attachement résidentiel et choix de vie et prennent ainsi la forme de stratégies de conciliation entre vie privée et vie professionnelle. Ces mobilités spatiales permettent alors paradoxalement la préservation des ancrages résidentiels, sociaux et familiaux.Roots and wings. Long-distance commuting patterns, or how to conciliate professional and personal lifeLong-distance commuting patterns appear to be increasing in Europe over the last ten years. These raising mobility patterns lead to reappraise the Zahavi conjecture and appear largely inexplicable by the classical rational actor paradigm traditionally used in transportation research. In literature, commuting is mainly explained by residential contexts, urban forms and job. Nevertheless this theoretical frame says little about the decision-making processes themselves. Based on a qualitative survey conducted in three European countries - France, Belgium and Switzerland – among a population of high commuters, this paper proposes an analysis of

  15. Model-Based Extracted Water Desalination System for Carbon Sequestration

    Energy Technology Data Exchange (ETDEWEB)

    Dees, Elizabeth M. [General Electric Global Research Center, Niskayuna, NY (United States); Moore, David Roger [General Electric Global Research Center, Niskayuna, NY (United States); Li, Li [Pennsylvania State Univ., University Park, PA (United States); Kumar, Manish [Pennsylvania State Univ., University Park, PA (United States)

    2017-05-28

    Over the last 1.5 years, GE Global Research and Pennsylvania State University defined a model-based, scalable, and multi-stage extracted water desalination system that yields clean water, concentrated brine, and, optionally, salt. The team explored saline brines that ranged across the expected range for extracted water for carbon sequestration reservoirs (40,000 up to 220,000 ppm total dissolved solids, TDS). In addition, the validated the system performance at pilot scale with field-sourced water using GE’s pre-pilot and lab facilities. This project encompassed four principal tasks, in addition to Project Management and Planning: 1) identify a deep saline formation carbon sequestration site and a partner that are suitable for supplying extracted water; 2) conduct a techno-economic assessment and down-selection of pre-treatment and desalination technologies to identify a cost-effective system for extracted water recovery; 3) validate the downselected processes at the lab/pre-pilot scale; and 4) define the scope of the pilot desalination project. Highlights from each task are described below: Deep saline formation characterization The deep saline formations associated with the five DOE NETL 1260 Phase 1 projects were characterized with respect to their mineralogy and formation water composition. Sources of high TDS feed water other than extracted water were explored for high TDS desalination applications, including unconventional oil and gas and seawater reverse osmosis concentrate. Technoeconomic analysis of desalination technologies Techno-economic evaluations of alternate brine concentration technologies, including humidification-dehumidification (HDH), membrane distillation (MD), forward osmosis (FO), turboexpander-freeze, solvent extraction and high pressure reverse osmosis (HPRO), were conducted. These technologies were evaluated against conventional falling film-mechanical vapor recompression (FF-MVR) as a baseline desalination process. Furthermore, a

  16. The constitution of the ternary system Ti-Ni-C; Die Konstitution des Dreistoffes Ti-Ni-C

    Energy Technology Data Exchange (ETDEWEB)

    Schuster, J.C.; Du, Y. [Technische Univ., Vienna (Austria). Inst. fuer Physikalische Chemie

    1998-12-31

    The system Ti-Ni-C was completely re-examined taking a new approach applying XRD, DTA, SEM-EDX and light microscopy, for elaboration of a complete thermodynamic description of the system. The carbon solubility in the binary Ti-Ni compounds is of significance only in the Ti{sub 2}Ni phase, and was found to be 4 at% at 900 C. The thermodynamic description thus achieved enables precise determination of the solubilities of Ti and C in solid or liquid nickel. (orig./CB) [Deutsch] Das System Ti-Ni-C wurde mittels XRD, DTA, SEM-EDX und Lichtmikroskopie umfassend neu untersucht mit dem Ziel, eine komplette thermodynamische Beschreibung zu ermoeglichen. Die Kohlenstoffloeslichkeit in den binaeren Ti-Ni Verbindungen ist nur fuer die Phase Ti{sub 2}Ni signifikant. Bei 900 C betrug sie 4 at% C. Die erarbeitete thermodynamische Beschreibung erlaubt eine praezise Darstellung der Ti- und C-Loeslichkeiten in festem und fluessigem Nickel. (orig.)

  17. Current systematic carbon-cycle observations and the need for implementing a policy-relevant carbon observing system

    International Nuclear Information System (INIS)

    Ciais, P.; Peregon, A.; Chevallier, F.; Bopp, L.; Breon, F.M.; Broquet, G.; Luyssaert, S.; Moulin, C.; Paris, J.D.; Poulter, B.; Rivier, L.; Wang, R.

    2014-01-01

    A globally integrated carbon observation and analysis system is needed to improve the fundamental understanding of the global carbon cycle, to improve our ability to project future changes, and to verify the effectiveness of policies aiming to reduce greenhouse gas emissions and increase carbon sequestration. Building an integrated carbon observation system requires transformational advances from the existing sparse, exploratory framework towards a dense, robust, and sustained system in all components: anthropogenic emissions, the atmosphere, the ocean, and the terrestrial biosphere. The paper is addressed to scientists, policy makers, and funding agencies who need to have a global picture of the current state of the (diverse) carbon observations. We identify the current state of carbon observations, and the needs and notional requirements for a global integrated carbon observation system that can be built in the next decade. A key conclusion is the substantial expansion of the ground-based observation networks required to reach the high spatial resolution for CO 2 and CH 4 fluxes, and for carbon stocks for addressing policy-relevant objectives, and attributing flux changes to underlying processes in each region. In order to establish flux and stock diagnostics over areas such as the southern oceans, tropical forests, and the Arctic, in situ observations will have to be complemented with remote-sensing measurements. Remote sensing offers the advantage of dense spatial coverage and frequent revisit. A key challenge is to bring remote-sensing measurements to a level of long-term consistency and accuracy so that they can be efficiently combined in models to reduce uncertainties, in synergy with ground based data. Bringing tight observational constraints on fossil fuel and land use change emissions will be the biggest challenge for deployment of a policy-relevant integrated carbon observation system. This will require in situ and remotely sensed data at much higher

  18. Carbon Dioxide Reduction Post-Processing Sub-System Development

    Science.gov (United States)

    Abney, Morgan B.; Miller, Lee A.; Greenwood, Zachary; Barton, Katherine

    2012-01-01

    The state-of-the-art Carbon Dioxide (CO2) Reduction Assembly (CRA) on the International Space Station (ISS) facilitates the recovery of oxygen from metabolic CO2. The CRA utilizes the Sabatier process to produce water with methane as a byproduct. The methane is currently vented overboard as a waste product. Because the CRA relies on hydrogen for oxygen recovery, the loss of methane ultimately results in a loss of oxygen. For missions beyond low earth orbit, it will prove essential to maximize oxygen recovery. For this purpose, NASA is exploring an integrated post-processor system to recover hydrogen from CRA methane. The post-processor, called a Plasma Pyrolysis Assembly (PPA) partially pyrolyzes methane to recover hydrogen with acetylene as a byproduct. In-flight operation of post-processor will require a Methane Purification Assembly (MePA) and an Acetylene Separation Assembly (ASepA). Recent efforts have focused on the design, fabrication, and testing of these components. The results and conclusions of these efforts will be discussed as well as future plans.

  19. Electronic Power System Application of Diamond-Like Carbon Films

    Science.gov (United States)

    Wu, Richard L. C.; Kosai, H.; Fries-Carr, S.; Weimer, J.; Freeman, M.; Schwarze, G. E.

    2003-01-01

    A prototype manufacturing technology for producing high volume efficiency and high energy density diamond-like carbon (DLC) capacitors has been developed. Unique dual ion-beam deposition and web-handling systems have been designed and constructed to deposit high quality DLC films simultaneously on both sides of capacitor grade aluminum foil and aluminum-coated polymer films. An optimized process, using inductively coupled RF ion sources, has been used to synthesize electrically robust DLC films. DLC films are amorphous and highly flexible, making them suitable for the production of wound capacitors. DLC capacitors are reliable and stable over a wide range of AC frequencies from 20 Hz to 1 MHz, and over a temperature range from .500 C to 3000 C. The compact DLC capacitors offer at least a 50% decrease in weight and volume and a greater than 50% increase in temperature handling capability over equal value capacitors built with existing technologies. The DLC capacitors will be suitable for high temperature, high voltage, pulsed power and filter applications.

  20. Carbon stocks in Norwegian forested systems. Preliminary data

    Directory of Open Access Journals (Sweden)

    Oyen BH.

    2000-01-01

    Full Text Available Between 1990 and 2010 the projected emissions of greenhouse gases in Norway is assumed to increase 24%. As a signatory to the Kyoto Protocol, Norway is supposed to limit the greenhouse gas emissions in the period 2008–2012 to 1% above the 1990 level. Potentially, forestry activities may contribute as a means to achieve the set target of emission reductions. The initial Norwegian views and proposals for definitions and accounting framework for activities under Articles 3.3 and 3.4 of the Kyoto Protocol was reported to the UNFCCC August 1 2000 by the Norwegian Ministry of Environment. There was also an annex to the submission with preliminary data and information on Articles 3.3 and 3.4 of the Kyoto Protocol. This paper is based on this annex, and focuses mainly on data for forests and other woodlands. Preliminary data indicate that approximately 85% of the carbon (C pool of forested systems is found in the soil. The major part of the annual C sequestration takes place in living biomass and soil, while sequestration in wood products and landfills etc. has been found to be of minor importance. It must be noted that the reported data are preliminary and contain large uncertainties.

  1. Influence of defects on the vibrations of rotating systems; Influence de defauts sur le comportement vibratoire des systemes tournants

    Energy Technology Data Exchange (ETDEWEB)

    Lazarus, A. [CEA Saclay, Dept. Modelisation de Systemes et Structures (DEN/DANS/DM2S/SEMT), 91 - Gif sur Yvette (France)

    2008-07-01

    For high rotation speeds, the imperfections (cracks, anisotropy...) of rotating machinery of the energy sector lead to a specific vibratory behavior which can damage the machine. The simulation of rotating machinery are usually realized for systems without defect. The aim of this thesis is to understand the influence of defects and to propose an algorithm to predict the dynamical behavior. In a first part the author studies the simplified rotating oscillators to propose a numerical method in order to taking into account the dynamic of these systems. This method is then applied to real rotating machinery with the Cast3m software. The numerical results are validated with experiments. (A.L.B.)

  2. Investigation of the feasibility of the solar-/geothermally-assisted heat supply system Gesotherm S; Untersuchung der Durchfuehrbarkeit des solar-/ geothermisch gestuetzten Waermeversorgungssystems Gesotherm S

    Energy Technology Data Exchange (ETDEWEB)

    Liebisch, H. [EKT Energie und Kommunal-Technologie GmbH, Berlin (Germany)

    1998-12-31

    The project has been running since 1st March 1998 and is supposed to investigate the technical feasibility and economic efficiency of the Gesotherm S heat supply system in the residential area Berlin-Biesdorf/Habichtshorst (1,000 flats). Main points of investigation are: proof of feasibility and geothermal analysis of the deep pit; analysis of storage possibilities and technical synergies of combined solar-geothermal operation; determination of the regenerative supply ratio; calculation of economic efficiency; estimation of cost-saving potentials. The whole system is simulated for these studies. A new simulation model was developed for the pit. Simulations are based on the SMILE-simulation environment developed by the Technical University of Berlin. First estimates indicate costs of DM 200 per MWh without subsidies. (orig.) [Deutsch] Mit dem seit 1. Maerz 1998 laufenden Vorhaben soll die technische Realisierbarkeit und wirtschaftliche Attraktivitaet des Waermeversorgungssystems Gesotherm S am Beispiel der Nahwaermeversorgung eines Wohngebietes (ca. 1.000 WE) in Berlin-Biesdorf/Habichtshorst umfassend untersucht werden. Schwerpunkte der Untersuchung: - Machbarkeitsnachweis und geothermische Analyse der Tiefensonde - Analyse der Speichermoeglichkeiten und der technischen Synergieeffekte des solar-/geothermischen Kombinationsbetriebes - Ermittlung der regenerativen Deckungsrate - Berechnung der Wirtschaftlichkeit - Abschaetzung der Kostensenkungspotentiale. Fuer die Untersuchung wird das Gesamtsystem simuliert. Speziell fuer die Tiefensonde wird ein neues Simulationsmodell entwickelt. Basis ist die, an der TU-Berlin entwickelte, Simulationsumgebung SMILE. Erste Abschaetzungen ergaben Waermekosten ohne Subventionen von unter 200 DM/MWh. (orig.)

  3. Optimisation des trajectoires d'un systeme de gestion de vol d'avions pour la reduction des couts de vol

    Science.gov (United States)

    Sidibe, Souleymane

    The implementation and monitoring of operational flight plans is a major occupation for a crew of commercial flights. The purpose of this operation is to set the vertical and lateral trajectories followed by airplane during phases of flight: climb, cruise, descent, etc. These trajectories are subjected to conflicting economical constraints: minimization of flight time and minimization of fuel consumed and environmental constraints. In its task of mission planning, the crew is assisted by the Flight Management System (FMS) which is used to construct the path to follow and to predict the behaviour of the aircraft along the flight plan. The FMS considered in our research, particularly includes an optimization model of flight only by calculating the optimal speed profile that minimizes the overall cost of flight synthesized by a criterion of cost index following a steady cruising altitude. However, the model based solely on optimization of the speed profile is not sufficient. It is necessary to expand the current optimization for simultaneous optimization of the speed and altitude in order to determine an optimum cruise altitude that minimizes the overall cost when the path is flown with the optimal speed profile. Then, a new program was developed. The latter is based on the method of dynamic programming invented by Bellman to solve problems of optimal paths. In addition, the improvement passes through research new patterns of trajectories integrating ascendant cruises and using the lateral plane with the effect of the weather: wind and temperature. Finally, for better optimization, the program takes into account constraint of flight domain of aircrafts which utilize the FMS.

  4. Carbon nanotube torsional springs for regenerative braking systems

    International Nuclear Information System (INIS)

    Liu, Sanwei; Martin, Corbin; Livermore, Carol; Lashmore, David; Schauer, Mark

    2015-01-01

    The modeling and demonstration of large stroke, high energy density and high power density torsional springs based on carbon nanotube (CNT) yarns is reported, as well as their application as energy-storing actuators for regenerative braking systems. An originally untwisted CNT yarn is cyclically loaded and unloaded in torsion, with the maximum rotation angle increasing incrementally until failure. The measured average extractable energy density values are 2.9 kJ kg −1   ±  1.2 kJ kg −1 and 3.4 kJ kg −1   ±  0.4 kJ kg −1 for 1-ply CNT yarns and 2-ply CNT yarns, respectively. Additionally, a regenerative braking system is demonstrated to capture the kinetic energy of a wheel and store it as elastic energy in twisted CNT yarns. When the yarn’s twist is released, the stored energy reaccelerates the wheel. The measured energy and mean power densities of the CNT yarns in the simple regenerative braking setup are on average 3.3 kJ kg −1 and 0.67 kW kg −1 , respectively, with maximum measured values of up to 4.7 kJ kg −1 and 1.2 kW kg −1 , respectively. A slightly lower energy density of up to 1.2 kJ kg −1 and a 0.29 kW kg −1 mean power density are measured for CNT yarns in a more complex setup that mimics a unidirectional rotating regenerative braking mechanism. (paper)

  5. Carbon nanotube torsional springs for regenerative braking systems

    Science.gov (United States)

    Liu, Sanwei; Martin, Corbin; Lashmore, David; Schauer, Mark; Livermore, Carol

    2015-10-01

    The modeling and demonstration of large stroke, high energy density and high power density torsional springs based on carbon nanotube (CNT) yarns is reported, as well as their application as energy-storing actuators for regenerative braking systems. An originally untwisted CNT yarn is cyclically loaded and unloaded in torsion, with the maximum rotation angle increasing incrementally until failure. The measured average extractable energy density values are 2.9 kJ kg-1  ±  1.2 kJ kg-1 and 3.4 kJ kg-1  ±  0.4 kJ kg-1 for 1-ply CNT yarns and 2-ply CNT yarns, respectively. Additionally, a regenerative braking system is demonstrated to capture the kinetic energy of a wheel and store it as elastic energy in twisted CNT yarns. When the yarn’s twist is released, the stored energy reaccelerates the wheel. The measured energy and mean power densities of the CNT yarns in the simple regenerative braking setup are on average 3.3 kJ kg-1 and 0.67 kW kg-1, respectively, with maximum measured values of up to 4.7 kJ kg-1 and 1.2 kW kg-1, respectively. A slightly lower energy density of up to 1.2 kJ kg-1 and a 0.29 kW kg-1 mean power density are measured for CNT yarns in a more complex setup that mimics a unidirectional rotating regenerative braking mechanism.

  6. Soil organic carbon stocks under native vegetation - revised estimates for use with the simple assessment option of the Carbon Benefits Project system

    NARCIS (Netherlands)

    Batjes, N.H.

    2011-01-01

    The Carbon Benefits Project (CBP) is developing a standardized system for sustainable land management projects to measure, model and report changes in carbon stocks and greenhouse gas (GHG) emissions for use at varying scales. A global framework of soil organic carbon (SOC) stocks under native

  7. Development of a low cost unmanned aircraft system for atmospheric carbon dioxide leak detection

    Science.gov (United States)

    Mitchell, Taylor Austin

    Carbon sequestration, the storage of carbon dioxide gas underground, has the potential to reduce global warming by removing a greenhouse gas from the atmosphere. These storage sites, however, must first be monitored to detect if carbon dioxide is leaking back out to the atmosphere. As an alternative to traditional large ground-based sensor networks to monitor CO2 levels for leaks, unmanned aircraft offer the potential to perform in-situ atmospheric leak detection over large areas for a fraction of the cost. This project developed a proof-of-concept sensor system to map relative carbon dioxide levels to detect potential leaks. The sensor system included a Sensair K-30 FR CO2 sensor, GPS, and altimeter connected an Arduino microcontroller which logged data to an onboard SD card. Ground tests were performed to verify and calibrate the system including wind tunnel tests to determine the optimal configuration of the system for the quickest response time (4-8 seconds based upon flowrate). Tests were then conducted over a controlled release of CO 2 in addition to over controlled rangeland fires which released carbon dioxide over a large area as would be expected from a carbon sequestration source. 3D maps of carbon dioxide were developed from the system telemetry that clearly illustrated increased CO2 levels from the fires. These tests demonstrated the system's ability to detect increased carbon dioxide concentrations in the atmosphere.

  8. Optimal heat rejection pressure in transcritical carbon dioxide air conditioning and heat pump systems

    DEFF Research Database (Denmark)

    Liao, Shengming; Jakobsen, Arne

    1998-01-01

    Due to the urgent need for environmentally benign refrigerants, the use of the natural substance carbon dioxide in refrigeration systems has gained more and more attention. In systems such as automobile air-conditioners and heat pumps, owing to the relatively high heat rejection temperatures, the...... dioxide air conditioning or heat pump systems and for intelligent controlling such systems.......Due to the urgent need for environmentally benign refrigerants, the use of the natural substance carbon dioxide in refrigeration systems has gained more and more attention. In systems such as automobile air-conditioners and heat pumps, owing to the relatively high heat rejection temperatures......, the cycles using carbon dioxide as refrigerant will have to operate in the transcritical area. In a transcritical carbon dioxide system, there is an optimal heat rejection pressure that gives a maximum COP. In this paper, it is shown that the value of this optimal heat rejection pressure mainly depends...

  9. Attractive forces study in macromolecules and critical systems; Etude des forces attractives dans les macromolecules et les systemes critiques

    Energy Technology Data Exchange (ETDEWEB)

    Penninckx-Sans, A.

    1995-07-10

    The attractive forces effect is particularly interesting at the proximity of a critical point. In a liquid system, there are two kinds of attractive forces in presence : the forces bound to the solution volume and those generated by the presence of the solution surface or by a solution interface. In the first case, the attractive forces are the more important as the system is in a critical field. For this study, the selected example is a polymer solution in a two solvents mixture. A formulation in terms of way integrals as part of statistical physics has lead us to find again some known results on the polymer chain conformation in the presence of two solvents (collapse of the polymer on itself) far from the critical point and to extend these results to the critical field. In the case of attractive forces created by the surface in some critical systems (polymer of infinite size in solution and binary mixture near the de mixture point), the adsorption profile created by the attraction of one specie by the surface, follows a scale law. The optical methods usually used for the study of these systems do not give characteristic sign of concentration profile in power law. In the case where the interaction potential between radiation and matter is attractive, the reflectivity gives a separate mark of the existence of the scale law in the form of a resonance. After some theoretical forecasts, the author has used this method on the binary mixture methanol-cyclohexane in order to reveal experimentally a reflectivity pseudo-discontinuity and then the existence of the power law in the critical adsorption profile. (O.L.). 69 refs., 60 tabs.

  10. MR-angiography in vasculitis and benign angiopathy of the central nervous system; MR-Angiographie in der Diagnostik von Vaskulitiden und benignen Angiopathien des Zentralnervensystems

    Energy Technology Data Exchange (ETDEWEB)

    Schlueter, A.; Hirsch, W.; Jassoy, A.; Behrmann, C.; Spielmann, R.P. [Klinik fuer Diagnostische Radiologie, Martin-Luther-Univ. Halle-Wittenberg (Germany); Kornhuber, M. [Klinik fuer Neurologie, Martin-Luther-Univ. Halle-Wittenberg (Germany); Keysser, G. [Klinik fuer Innere Medizin I, Martin-Luther-Univ. Halle-Wittenberg (Germany)

    2001-06-01

    To evaluate TOF 3D magnetic resonance angiography (MRA) of the intracranial arteries in patients with vasculitis or vasculitis-like benign angiopathy of the central nervous system (CNS). Method: The results of MRA in 20 patients with clinically and radiographically proven vasculitis (17/20) or vasculitis-like benign angiopathy (3/20) of the CNS were retrospectively analysed. Patients with hyperintense lesions of more than 3 mm on T{sub 2}-weighted MRI images were included in this trial. An inflammatory, embolic, neurodegenerative or metastatic origin of these lesions was excluded by extensive clinical studies. For the MR-examination a TOF 3D FISP sequence was used on a 1.5 T imager. Results: MRA showed characteristic changes for vasculitis or angiopathy in 15 of 20 patients (75%). Conclusions: In patients suspected of having a vasculitis or vasculitis-like angiopathy, MRA is recommended as a non-invasive modality. If the results of MRI and extensive clinical studies are carefully correlated, MRA may substitute conventional angiography in cases with typical vascular changes. (orig.) [German] Ziel der Studie war es, den Wert der TOF 3D Magnetresonanzangiographie (MRA) bei Patienten mit Vaskulitis oder vaskulitisaehnlichen, benignen Angiopathien des Zentralnervensystems (ZNS) zu erfassen. Methoden: Die MRA-Aufnahmen von 20 Patienten mit klinisch und bildgebend nachgewiesener Vaskulitis (17/20) oder vaskulitisaehnlicher, benigner Angiopathie (3/20) des ZNS wurden retrospektiv ausgewertet. Eingeschlossen wurden Patienten mit Laesionen des Hirnparenchymsgroessen 3 mm in den T{sub 2}-gewichteten Sequenzen der MRT, wobei diese Veraenderungen aufgrund umfangreicher klinischer Untersuchungen nicht auf das Vorliegen neurodegenerativer, anderweitig entzuendlicher, metastatischer oder embolischer Ursachen zurueckzufuehren waren. Fuer die MRA wurde eine TOF 3D FISP-Sequenz auf einem 1,5T MR-Geraet verwendet. Ergebnisse: MR-angiographisch wurden bei 15/20 Patienten (75

  11. A gas extraction system for the measurement of carbon dioxide and carbon isotopes in polar ice cores

    International Nuclear Information System (INIS)

    Steig, E.

    1992-06-01

    Knowledge of the distribution of Carbon 13 in the glacial ocean, atmosphere, and biosphere is important to understanding the causes of glacial/interglacial changes in atmospheric CO 2 levels. Although deep-ocean Carbon 13 values are well-constrained by ocean sediment studies, model-based estimates of changes in the carbon budget for the biosphere and atmosphere vary considerably. Measurement of atmospheric Carbon 13 in CO 2 in ice cores will provide additional constraints on this budget and will also improve estimates of changes in the ocean surface layer Carbon 13. Direct measurement of ancient atmospheric Carbon 13 can be accomplished through polar ice core studies. A gas-extraction line for ice cores has been designed and constructed with particular attention to the specific difficulties of measuring Carbon 13 in CO 2 . The ice is shaved, rather than crushed, to minimize fractionation effects resulting from gas travel through long air-paths in the ice. To minimize the risk of isotopic contamination and fractionation within the vacuum line, CO 2 is separated immediately from the air; the CO 2 concentration is then measured by a simple pressure/volume comparison rather than by gas chromatography or spectroscopy. Measurements from Greenland ice core samples give an average value of 280±2 ppM CO 2 for preindustrial samples, demonstrating that the extraction system gives accurate, precise determinations Of CO 2 concentrations. Measurement of δ 13 C from polar ice samples has not been achieved at this time. However, results on standard air samples demonstrate a precision for δ 13 C of less than 0.2 per-thousand at the 95% confidence level

  12. Nonlinear characteristics of the rotating exciter system of power plant generators in case of electricity accidents; Transientes Verhalten des rotierenden Erregersystems von Kraftwerksgeneratoren bei elektrischen Stoerfaellen

    Energy Technology Data Exchange (ETDEWEB)

    Ataei, Nader

    2006-05-09

    Different types of exciter are used for voltage supply to the synchronous generators of power stations depending on the required power and design. The exciter system of the generator, which as a rule consists syncronous motors and commutators, is commonly modeled in conventional models by control units with nonlinear characteristics which do not give an accurate picture of the dynamic processes inside the exciter motor. It was not possible to assess the component loads of the exciter components and the physical characteristics within the exciter system. In this study, a brushless exciter for the grid-connected synchronous generator was investigated which consists of two synchronous motors as primary and secondary exciter and two commutator bridges. A dynamic simulation model was developed for calculating the interactions between the grid, generator and exciter unit in consideration of electromagnetic and galvanic coupling. For this, the normal control units were replaced by physical components of the exciter system, i.e. electric exciter motors and commutators. The study was carried out using an enhanced version of the Siemens NETOMAC software, which provided information on the loads on the exciter components in case of internal and external failures. In particular, loads in coils and commutators were calculated that could not be measured before. The findings enable more accurate dimensioning of the exciter unit making it more fail-safe, and the protective systems can be adjusted more accurately. One important result of the investigation was the identification of all dynamic processes going on between the exciter motors, commutators, generator and grid induced by external and internal failures. (orig.) [German] Zur Spannungsversorgung der Synchrongeneratoren in Kraftwerken werden je nach Leistungsanforderung und Baukonzept unterschiedliche Erregereinrichtungen verwendet. Das Erregersystem des Generators, das in der Regel aus Erregersynchronmaschinen und

  13. RESEARCH OF LIMY AND CARBONATE SYSTEM OF SUGAR PRODUCTION

    Directory of Open Access Journals (Sweden)

    N. G. Kulneva

    2012-01-01

    Full Text Available Influence of рН and temperature on activity of suspension of lime and carbonate in sugar production is investigated. Possibility of decrease in a consumption of reagents on purification of production sugar solutions is established.

  14. Development of Electro-Microbial Carbon Capture and Conversion Systems

    KAUST Repository

    Al Rowaihi, Israa

    2017-01-01

    to fix ca. 800 Gt (gigaton) of CO2 in the planets largest carbon-capture process. Photosynthesis combines light harvesting, charge separation, catalytic water splitting, generation of reduction equivalents (NADH), energy (ATP) production and CO2 fixation

  15. Carbon abatement potential of solar home systems in India and their cost reduction due to carbon finance

    International Nuclear Information System (INIS)

    Chaurey, A.; Kandpal, T.C.

    2009-01-01

    About 78 million rural households in India reportedly lack access to grid electricity. About 67 million of them use kerosene for lighting. Government of India is promoting the use of solar home systems (SHS) as one of the options for meeting lighting requirements in households in remote and less inhabited villages. About 363,399 SHS were reportedly disseminated across the country by December 2007. Apart from meeting the basic lighting need of the households, SHS also help in abating the emissions of green house gases (GHGs) by directly displacing the use of kerosene in households that currently use it for lighting. This study has attempted at estimating the CO 2 mitigation potential of SHS in India by studying the potential for their diffusion and the appropriate baseline. Subsequently, the scope for cost reduction to the user due to carbon finance, if received, is also studied. It is found that carbon finance could reduce the effective burden of SHS to the user by 19% if carbon prices were $10/tCO 2 and no transaction costs were involved in getting the carbon revenues. These benefits are also estimated for scenarios where transaction costs are incurred by the project proponent in getting the carbon benefits

  16. Physics related to control and safety of hybrid systems; Physique associee au controle et a la surete des systemes hybrides

    Energy Technology Data Exchange (ETDEWEB)

    Gueton, O

    2001-12-01

    Regarding nuclear waste management, ADS can be considered as large minor actinides burners. In a first part, a critical analysis of different reactor types shows that fast spectrum, helium coolant and nitride fuel, containing 100% minor actinides, agree perfectly with the high transmutation requirements of ADS. The control and safety demonstration of this system represents the main purpose of this study. Understanding spatial and dynamic behaviour of ADS flux is absolutely necessary. For this purpose, we have defined an indicator to quantify spatial decoupling. It shows, on the one hand, point kinetic deficiency to study local transients, and on the other hand, perturbations propagation differences between ADS and critical cores. Then, in a more concrete approach, accidental sequences (source transient, beam de-focalization, reactivity insertions, loss of flow, depressurization) are evaluated for this core, strongly loaded with minor actinides. It is shown that the automatic beam shutdown leads to preserve large safety margins for all studied transients. The accelerator emergency stop is induced by an unexpected evolution of the core control parameters. These parameters, except reactivity, can be directly measured in subcritical systems like in critical ones. Concerning reactivity, we suggest a new method for its absolute determination in ADS: at the time of reactor start-up, the reactivity must be calibrated by coupling two methods of relative reactivity measurements (pulsed source and Approached Source Multiplication) for successive subcritical levels. After that, the on-line follow-up of reactivity is obtained from this calibration like in a critical core. (authors)

  17. Carbon dynamics in peatland pool systems: the role of light

    Science.gov (United States)

    Pickard, Amy; Heal, Kate; McLeod, Andy; Dinsmore, Kerry

    2016-04-01

    Open-water pools are widespread in peatlands and are considered to represent biogeochemical hotspots within the peatland landscape. However the contribution of pool systems to wider peatland C cycling has not been quantified fully and there is a lack of knowledge of the role of photochemical processes in such environments. In this study, light exposure experiments were conducted in two contrasting pools to test the reactivity of aquatic C. The first study site was located at Cross Lochs (CL), Forsinard, in the Flow Country of Northern Scotland, in a 412 m2 pool characterised by low dissolved organic carbon (DOC) concentrations (˜15 mg C L-1). The second site was located at Red Moss of Balerno (RM), a raised bog in central Scotland, in a 48 m2 pool with high DOC concentrations (˜35 mg C L-1). Experiments took place over 9 days in situ at each pool in mid-summer 2015, with 500 mL water samples contained in bags transparent to sunlight and in opaque control bags. After field exposure, optical, chemical and stable C isotope analyses were conducted on the samples. Significant differences in biogeochemical cycling of DOC were detected between the two systems, with DOC losses as a percentage of the total C pool 15% higher at RM than at CL after light exposure. The mean DOC concentration of light exposed samples at RM declined steeply initially, with 83% observed DOC degradation occurring by day 3 of the experiment. Total losses of 7.9 mg DOC L-1were observed in light exposed samples at RM, along with decreasing E4:E6 ratios, suggesting that material remaining at the end of the experiment was humified. Depletion of DOC was positively correlated with production of CO2 at both sites, with concentrations of up to 4.3 mg CO2-C L-1 recorded at RM. Stable C isotope signatures at both sites were altered under light treatment, as demonstrated by the production of enriched δ13C-DOC (+0.46 ‰ relative to opaque bags) and depleted δ13C-DIC (-0.97 ‰ relative to opaque bags) at

  18. Reviews and syntheses: Systematic Earth observations for use in terrestrial carbon cycle data assimilation systems

    Science.gov (United States)

    Scholze, Marko; Buchwitz, Michael; Dorigo, Wouter; Guanter, Luis; Quegan, Shaun

    2017-07-01

    The global carbon cycle is an important component of the Earth system and it interacts with the hydrology, energy and nutrient cycles as well as ecosystem dynamics. A better understanding of the global carbon cycle is required for improved projections of climate change including corresponding changes in water and food resources and for the verification of measures to reduce anthropogenic greenhouse gas emissions. An improved understanding of the carbon cycle can be achieved by data assimilation systems, which integrate observations relevant to the carbon cycle into coupled carbon, water, energy and nutrient models. Hence, the ingredients for such systems are a carbon cycle model, an algorithm for the assimilation and systematic and well error-characterised observations relevant to the carbon cycle. Relevant observations for assimilation include various in situ measurements in the atmosphere (e.g. concentrations of CO2 and other gases) and on land (e.g. fluxes of carbon water and energy, carbon stocks) as well as remote sensing observations (e.g. atmospheric composition, vegetation and surface properties).We briefly review the different existing data assimilation techniques and contrast them to model benchmarking and evaluation efforts (which also rely on observations). A common requirement for all assimilation techniques is a full description of the observational data properties. Uncertainty estimates of the observations are as important as the observations themselves because they similarly determine the outcome of such assimilation systems. Hence, this article reviews the requirements of data assimilation systems on observations and provides a non-exhaustive overview of current observations and their uncertainties for use in terrestrial carbon cycle data assimilation. We report on progress since the review of model-data synthesis in terrestrial carbon observations by Raupach et al.(2005), emphasising the rapid advance in relevant space-based observations.

  19. The grand partition function Z ({alpha},{beta}) of a quantum system is studied, using diagrammatic representations of the perturbation expansion; La grande fonction de partition Z ({alpha},{beta}) d'un systeme quantique est etudies en utilisant des representations diagrammatiques du developpement en serie des perturbations

    Energy Technology Data Exchange (ETDEWEB)

    Dominicis, C. de [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    The grand partition function Z ({alpha},{beta}) of a quantum system is studied, using diagrammatic representations of the perturbation expansion. For a fermions system, it is possible to show, by proper resummation, without approximations but under some 'regularity hypothesis', that Log Z ({alpha},{beta}) takes a form where, besides trivial dependences, {alpha} and {beta} only appear through a statistical factor F{sub k}{sup -} = [1 + e{sup -{alpha}}{sup +{beta}}{sup {epsilon}{sub k}{sup 0}}{sup -{beta}}{sup W{sub k}}]{sup -1}. W{sub k} is a (real) self-consistent potential, generalized to all orders and can be defined by a stationary condition on Log Z ({alpha},{beta}) under variations of F{sub k}{sup -}. The thermodynamical quantities take a form analogous to the expressions Landau introduced for the Fermi liquids. The zero temperature limit (for isotropic systems) gives back Goldstone expressions for the ground state of a system. (author) [French] La grande fonction de partition Z ({alpha},{beta}) d'un systeme quantique est etudiee en utilisant des representations diagrammatiques du developpement en serie des perturbations. Pour un systeme de fermions on peut, par des resommations adequates, sans approximations mais sous reserve d'une 'hypothese de regularite', mettre Log Z ({alpha},{beta}) sous une forme ou, en dehors de dependances triviales, {alpha} et {beta} n'interviennent que par l'intermediaire d'un facteur statistique F{sub k}{sup -} = [1 + e{sup -{alpha}}{sup +{beta}}{sup {epsilon}{sub k}{sup 0}}{sup -{beta}}{sup W{sub k}}]{sup -1}. W{sub k} est ici un potentiel self-consistant (reel) generalise a tous les ordres et peut etre defini par une condition de stationnarite de Log Z ({alpha},{beta}) pour des variations de F{sub k}{sup -}. Les grandeurs thermodynamiques prennent une forme analogue aux expressions que LANDAU a introduites pour les liquides de FERMI. A la limite de la temperature nulle (et pour un

  20. The grand partition function Z ({alpha},{beta}) of a quantum system is studied, using diagrammatic representations of the perturbation expansion; La grande fonction de partition Z ({alpha},{beta}) d'un systeme quantique est etudies en utilisant des representations diagrammatiques du developpement en serie des perturbations

    Energy Technology Data Exchange (ETDEWEB)

    Dominicis, C de [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    The grand partition function Z ({alpha},{beta}) of a quantum system is studied, using diagrammatic representations of the perturbation expansion. For a fermions system, it is possible to show, by proper resummation, without approximations but under some 'regularity hypothesis', that Log Z ({alpha},{beta}) takes a form where, besides trivial dependences, {alpha} and {beta} only appear through a statistical factor F{sub k}{sup -} = [1 + e{sup -{alpha}}{sup +{beta}}{sup {epsilon}{sub k}{sup 0}}{sup -{beta}}{sup W{sub k}}]{sup -1}. W{sub k} is a (real) self-consistent potential, generalized to all orders and can be defined by a stationary condition on Log Z ({alpha},{beta}) under variations of F{sub k}{sup -}. The thermodynamical quantities take a form analogous to the expressions Landau introduced for the Fermi liquids. The zero temperature limit (for isotropic systems) gives back Goldstone expressions for the ground state of a system. (author) [French] La grande fonction de partition Z ({alpha},{beta}) d'un systeme quantique est etudiee en utilisant des representations diagrammatiques du developpement en serie des perturbations. Pour un systeme de fermions on peut, par des resommations adequates, sans approximations mais sous reserve d'une 'hypothese de regularite', mettre Log Z ({alpha},{beta}) sous une forme ou, en dehors de dependances triviales, {alpha} et {beta} n'interviennent que par l'intermediaire d'un facteur statistique F{sub k}{sup -} = [1 + e{sup -{alpha}}{sup +{beta}}{sup {epsilon}{sub k}{sup 0}}{sup -{beta}}{sup W{sub k}}]{sup -1}. W{sub k} est ici un potentiel self-consistant (reel) generalise a tous les ordres et peut etre defini par une condition de stationnarite de Log Z ({alpha},{beta}) pour des variations de F{sub k}{sup -}. Les grandeurs thermodynamiques prennent une forme analogue aux expressions que LANDAU a introduites pour les liquides de FERMI. A la limite de la temperature nulle (et pour un systeme isotrope) on retrouve terme a terme les

  1. Modelling Cr(VI) removal by a combined carbon-activated sludge system

    International Nuclear Information System (INIS)

    Orozco, A. Micaela Ferro; Contreras, Edgardo M.; Zaritzky, Noemi E.

    2008-01-01

    The combined carbon-activated sludge process has been proposed as an alternative to protect the biomass against toxic substances in wastewaters; however, the information about the effect of powdered-activated carbon (PAC) addition in activated sludge reactors for the treatment of wastewaters containing Cr(VI) is limited. The objectives of the present study were: (a) to evaluate the removal of hexavalent chromium by (i) activated sludge microorganisms in aerobic batch reactors, (ii) powdered-activated carbon, and (iii) the combined action of powdered-activated carbon and biomass; (b) to propose mathematical models that interpret the experimental results. Different Cr(VI) removal systems were tested: (S1) biomass (activated sludge), (S2) PAC, and (S3) the combined activated carbon-biomass system. A Monod-based mathematical model was used to describe the kinetics of Cr(VI) removal in the system S1. A first-order kinetics with respect to Cr(VI) and PAC respectively, was proposed to model the removal of Cr(VI) in the system S2. Cr(VI) removal in the combined carbon-biomass system (S3) was faster than both Cr(VI) removal using PAC or activated sludge individually. Results showed that the removal of Cr(VI) using the activated carbon-biomass system (S3) was adequately described by combining the kinetic equations proposed for the systems S1 and S2

  2. 43 Caractérisation des émergences du piémont de jbel Ayachi ...

    African Journals Online (AJOL)

    PR BOKO

    dolomies et des calcaires. Cette sédimentation carbonatée, de plate-forme interne peu profonde, et relativement homogène, les carbonates liasiques sont contournés et affectés par des failles normales et des fractures ouvertes à remplissage synsédimentaire [8]. Ce type de formation lithologique favorise la karstification.

  3. Developing mechanisms for estimating carbon footprint in farming systems

    Science.gov (United States)

    Anaya-Romero, María; Fernández Luque, José Enrique; Rodríguez Merino, Alejandro; José Moreno Delgado, Juan; Rodado, Concepción Mira; Romero Vicente, Rafael; Perez-Martin, Alfonso; Muñoz-Rojas, Miriam

    2015-04-01

    Sustainable land management is critical to avoid land degradation and to reclaim degraded land for its productive use and for reaping the benefits of crucial ecosystem services and protecting biodiversity. It also helps in mitigating and adapting to climate change. Land and its various uses are affected severely by climate change too (flooding, droughts, etc.). Existing tools and technologies for efficient land management need to be adapted and their application expanded. A large number of human livelihoods and ecosystems can benefit from these tools and techniques since these yield multiple benefits. Disseminating and scaling up the implementation of sustainable land management approaches will, however, need to be backed up by mobilizing strong political will and financial resources. The challenge is to provide an integral decision support tool that can establish relationships between soil carbon content, climate change and land use and management aspects that allow stakeholders to detect, cope with and intervene into land system change in a sustainable way. In order to achieve this goal an agro-ecological meta-model called CarboLAND will be calibrated in several plots located in Andalusia region, Southern Spain, under different scenarios of climate and agricultural use and management. The output will be the CLIMALAND e-platform, which will also include protocols in order to support stakeholders for an integrated ecosystem approach, taking into account biodiversity, hydrological and soil capability, socio-economic aspects, and regional and environmental policies. This tool will be made available at the European context for a regional level, providing user-friendly interfaces and a scientifically-technical platform for the assessment of sustainable land use and management.

  4. Carbon sequestration potential in agroforestry system in India: an analysis for carbon project

    Czech Academy of Sciences Publication Activity Database

    Sharma, R.; Sanjeev, K.; Chauhan, D. K.; Tripathi, Abishek

    2016-01-01

    Roč. 90, č. 4 (2016), s. 631-644 ISSN 0167-4366 Institutional support: RVO:67179843 Keywords : Agroforestry * Biophysical and practical potential * Carbon sequestration * Poplar based agroforestry * Institutional mechanism Subject RIV: GC - Agronomy Impact factor: 1.170, year: 2016

  5. Extreme climatic events: reducing ecological and social systems vulnerabilities; Evenements climatiques extremes: reduire les vulnerabilites des systemes ecologiques et sociaux

    Energy Technology Data Exchange (ETDEWEB)

    Decamps, H.; Amatore, C.; Bach, J.F.; Baccelli, F.; Balian, R.; Carpentier, A.; Charnay, P.; Cuzin, F.; Davier, M.; Dercourt, J.; Dumas, C.; Encrenaz, P.; Jeannerod, M.; Kahane, J.P.; Meunier, B.; Rebut, P.H.; Salencon, J.; Spitz, E.; Suquet, P.; Taquet, P.; Valleron, A.J.; Yoccoz, J.C.; Chapron, J.Y.; Fanon, J.; Andre, J.C.; Auger, P.; Bourrelier, P.H.; Combes, C.; Derrida, B.; Laubier, L.; Laval, K.; Le Maho, Y.; Marsily, G. De; Petit, M.; Schmidt-Laine, C.; Birot, Y.; Peyron, J.L.; Seguin, B.; Barles, S.; Besancenot, J.P.; Michel-Kerjan, E.; Hallegatte, S.; Dumas, P.; Ancey, V.; Requier-Desjardins, M.; Ducharnes, A.; Ciais, P.; Peylin, P.; Kaniewski, D.; Van Campo, E.; Planton, S.; Manuguerra, J.C.; Le Bars, Y.; Lagadec, P.; Kessler, D.; Pontikis, C.; Nussbaum, R.

    2010-07-01

    The Earth has to face more and more devastating extreme events. Between 1970 and 2009, at the worldwide scale, the 25 most costly catastrophes all took place after 1987, and for more than half of them after 2001. Among these 25 catastrophes, 23 were linked to climate conditions. France was not spared: the December 1999 storms led to 88 deaths, deprived 3.5 million households of electricity and costed more than 9 billion euros. The 2003 heat wave led to about 15000 supernumerary deaths between August 1 and August 20. The recent Xynthia storm, with its flood barrier ruptures, provoked 53 deaths in addition to many other tragedies that took place in areas liable to flooding. In the present day context of climate change, we know that we must be prepared to even more dangerous events, sometimes unexpected before. These events can have amplified effects because of the urban development, the overpopulation of coastal areas and the anthropization of natural environments. They represent real 'poverty traps' for the poorest countries of the Earth. The anticipation need is real but is our country ready to answer it? Does it have a sufficient contribution to international actions aiming at reducing risks? Is his scientific information suitable? France is not less vulnerable than other countries. It must reinforce its prevention, its response and resilience capacities in the framework of integrated policies of catastrophes risk management as well as in the framework of climate change adaptation plans. This reinforcement supposes the development of vigilance systems with a better risk coverage and benefiting by the advances gained in the meteorology and health domains. It supposes a town and country planning allowing to improve the viability of ecological and social systems - in particular by protecting their diversity. Finally, this reinforcement requires inciting financial coverage solutions for catastrophes prevention and for their management once they have taken

  6. Electrical properties of carbon nanotubes modified GaSe glassy system

    Science.gov (United States)

    Khan, Hana; Khan, Zubair M. S. H.; Islam, Shama; Rahman, Raja Saifu; Husain, M.; Zulfequar, M.

    2018-05-01

    In this paper we report the investigation of the effect of Carbon Nanotubes (CNT) addition on the electrical properties of GaSe Glassy system. Dielectric constant and dielectric loss of GaSe glassy system are found to increase on CNT addition. The conductivity of GaSe glasy systems is also found to increase on CNT addition. This behavior is attributed to the excellent conduction properties of Carbon Nanotube.

  7. Ocean carbon and heat variability in an Earth System Model

    Science.gov (United States)

    Thomas, J. L.; Waugh, D.; Gnanadesikan, A.

    2016-12-01

    Ocean carbon and heat content are very important for regulating global climate. Furthermore, due to lack of observations and dependence on parameterizations, there has been little consensus in the modeling community on the magnitude of realistic ocean carbon and heat content variability, particularly in the Southern Ocean. We assess the differences between global oceanic heat and carbon content variability in GFDL ESM2Mc using a 500-year, pre-industrial control simulation. The global carbon and heat content are directly out of phase with each other; however, in the Southern Ocean the heat and carbon content are in phase. The global heat mutli-decadal variability is primarily explained by variability in the tropics and mid-latitudes, while the variability in global carbon content is primarily explained by Southern Ocean variability. In order to test the robustness of this relationship, we use three additional pre-industrial control simulations using different mesoscale mixing parameterizations. Three pre-industrial control simulations are conducted with the along-isopycnal diffusion coefficient (Aredi) set to constant values of 400, 800 (control) and 2400 m2 s-1. These values for Aredi are within the range of parameter settings commonly used in modeling groups. Finally, one pre-industrial control simulation is conducted where the minimum in the Gent-McWilliams parameterization closure scheme (AGM) increased to 600 m2 s-1. We find that the different simulations have very different multi-decadal variability, especially in the Weddell Sea where the characteristics of deep convection are drastically changed. While the temporal frequency and amplitude global heat and carbon content changes significantly, the overall spatial pattern of variability remains unchanged between the simulations.

  8. First principles investigation of interaction between impurity atom (Si, Ge, Sn) and carbon atom in diamond-like carbon system

    International Nuclear Information System (INIS)

    Li, Xiaowei; Wang, Aiying; Lee, Kwang-Ryeol

    2012-01-01

    The interaction between impurity atom (Si, Ge, and Sn) and carbon atom in diamond-like carbon (DLC) system was investigated by the first principles simulation method based on the density functional theory. The tetrahedral configuration was selected as the calculation model for simplicity. When the bond angle varied in a range of 90°–130° from the equivalent state of 109.471°, the distortion energy and the electronic structures including charge density of the highest occupied molecular orbital (HOMO) and partial density of state (PDOS) in the different systems were calculated. The results showed that the addition of Si, Ge and Sn atom into amorphous carbon matrix significantly decreased the distortion energy of the system as the bond angles deviated from the equilibrium one. Further studies of the HOMO and PDOS indicated that the weak covalent bond between Si(Ge, Sn) and C atoms was formed with the decreased strength and directionality, which were influenced by the electronegative difference. These results implied that the electron transfer behavior at the junction of carbon nano-devices could be tailored by the impurity element, and the compressive stress in DLC films could be reduced by the incorporation of Si, Ge and Sn because of the formation of weaker covalent bonds. - Highlights: ►Distortion energy after bond angle distortion was decreased comparing with C-C unit. ►The weak covalent bond was formed between impurity atoms and corner carbon atoms. ►Observed electron transfer behavior affected the strength and directionality of bond. ►Reduction of strength and directionality of bond contributed to small energy change.

  9. Dynamics of organic and inorganic carbon across contiguous mangrove and seagrass systems (Gazi Bay, Kenya)

    NARCIS (Netherlands)

    Bouillon, S.; Dehairs, F.; Velimirov, B.; Abril, G.; Borges, A.V.

    2007-01-01

    We report on the water column biogeochemistry in adjacent mangrove and seagrass systems in Gazi Bay (Kenya), with a focus on assessing the sources and cycling of organic and inorganic carbon. Mangrove and seagrass-derived material was found to be the dominant organic carbon sources in the water

  10. Emission of carbon dioxide from a tropical estuarine system, Goa, India

    Digital Repository Service at National Institute of Oceanography (India)

    Sarma, V.V.S.S.; DileepKumar, M.; Manerikar, M.

    Carbon dioxide species were studied in Mandovi-Zuari system, a tropical estuarine complex influenced by strong monsoonal run-off, with implications to build up and air-water exchange of CO sub(2) . Total carbon dioxide (TOC sub(2)) behaved...

  11. Optimizing root system architecture in biofuel crops for sustainable energy production and soil carbon sequestration.

    Science.gov (United States)

    To, Jennifer Pc; Zhu, Jinming; Benfey, Philip N; Elich, Tedd

    2010-09-08

    Root system architecture (RSA) describes the dynamic spatial configuration of different types and ages of roots in a plant, which allows adaptation to different environments. Modifications in RSA enhance agronomic traits in crops and have been implicated in soil organic carbon content. Together, these fundamental properties of RSA contribute to the net carbon balance and overall sustainability of biofuels. In this article, we will review recent data supporting carbon sequestration by biofuel crops, highlight current progress in studying RSA, and discuss future opportunities for optimizing RSA for biofuel production and soil carbon sequestration.

  12. Spikes Filtering with Neural Networks: a Two-Stage Detection System Filtrage des pics par des réseaux neuronaux : un système de détection à deux étages

    Directory of Open Access Journals (Sweden)

    Mousset E.

    2006-11-01

    Full Text Available A two-stage system for detecting spikes in seismic data has been developed, each stage using neural networks (NN techniques. The first stage is trained and used on a running preprocessing window over traces ; its goal is to satisfy the three following criteria (by decreasing priority :(a Maximize the number of detections. (b Minimize the CPU-cost. (c Minimize the number of false alarms. The second stage processes the first stage's alarms in order to discriminate between true and false ones. Several preprocessing techniques, and especially their discriminatory power (to separate noise and signal were tested :(a Based on energy criteria. (b Based on frequency spectrum. (c Based on signal attributes, as Hilbert attributes, or other signal features. Several NN architectures, with global, local and constrained connections were compared. NN behavior at neighborhood of decision area was observed in order to determine a selection method of relevant decision thresholds. The first stage was tested on raw traces issued from 250 shots of a real twodimensional onshore seismic campaign. Three different migrated sections (Dip Moveout were compared. The first was obtained by applying on the latter raw traces a conventional processing sequence including an equalization phase, the second by omitting the equalization phase and the third by both including a prior NN filtering of raw traces and omitting the equalization phase. Afin de détecter les spikes au sein des traces sismiques brutes, nous avons développé un système composé de deux étages, chacun d'eux faisant intervenir un réseau de neurones artificiels dans ses calculs. Le premier réseau est entraîné pour traiter chaque trace au moyen d'une fenêtre glissante et doit satisfaire les trois critères suivants (par ordre décroissant de priorité : - maximiser le nombre de détections; - minimiser la consommation CPU; - minimiser le nombre de fausses alarmes. Le second étage est entraîné à partir

  13. Two Phase Flow in Nodular Systems: Laboratory Experiments Écoulements polyphasiques dans des systèmes nodulaires : expériences de laboratoire

    Directory of Open Access Journals (Sweden)

    Alhanai W.

    2006-11-01

    Full Text Available Heterogeneity effects within the grid block of a reservoir numerical model are generally taken into account by using pseudo-relative permeability and capillary pressure curves. Some insight into the physics of these pseudo-functions can be obtained from multiple scale analysis such as largescale averaging. Previous theoretical results have shown specific behaviour associated with nodular systems. Laboratory scale experiments were performed that emphasize the difference in behaviour of nodular systems when the properties of the different regions are interchanged. Sandstone nodules embedded in a more permeable continuous region made of sand showed a quasi-static behaviour under experimental conditions while the reverse situation, i. e. sand nodules in a sandstone continuous region, exhibited a totally different behaviour in terms of final saturation and recovery curves. These results are discussed with respect to the large-scale averaging objective. Notre étude s'inscrit dans le cadre général de la prise en compte des hétérogénéités dans la modélisation des écoulements polyphasiques en milieu poreux. Les modèles de gisement utilisent le plus souvent les méthodes de pseudo-fonctions , faisant l'hypothèse que les équations décrivant les écoulements polyphasiques ne sont pas modifiées, dans leur forme, par le changement d'échelle. En fait, il est reconnu que le processus de changement d'échelle peut conduire à des propriétés transitoires, directionnelles et dynamiques. Il est donc nécessaire de bien connaître la physique des écoulements à l'échelle locale pour décrire l'écoulement à une échelle plus grande incluant les hétérogénéités. Le problème physique auquel nous nous intéressons est représenté figure 1. Lors de travaux précédents, Quintard et Whitaker (1988 ont obtenu les résultats suivants : - Dans le cas quasi-statique (écoulement contrôlé par les forces capillaires, les équations à grande

  14. Production of thin carbon stripper foils using heated-substrates in a cathodic arc deposition system

    International Nuclear Information System (INIS)

    Merchant, A.R.; Lobanov, N.; Elliman, R.G.; Ophel, T.R.; Rode, A.; Weisser, D.C.; Turkentine, R.B.

    1998-01-01

    The lifetime of carbon stripper foil can have a marked impact on the successful running of a beam line. Standard techniques for production of carbon stripper foils include evaporation of carbon (ec) and laser-pulsed ablation (Ipa). Recent work by a using Ipa has been successful in substantially increasing the lifetime of a very thin foil. The suspected mechanism for the increased lifetime of the foil is that the amorphous carbon foil is density-matched to that of graphite (around 2.26g/cc). In this work, we attempt to reproduce this result by producing carbon stripper foils with a mass-density similar to graphite using a cathodic arc deposition system. The cathodic arc is well known for the production of tetrahedral amorphous carbon: a high density, high stress form of carbon with over 90% sp 3 -like bonds; to reduce the density of the carbon and promote more graphitic structure, a high bias was initially attempted but this proved unsuccessful. Another method is to use a heated-substrate holder to reduce compressive stress within the deposited film. The performance of the density-matched carbon stripper foils and the implications for future production of high-quality carbon stripper foils in our laboratory will be discussed. (authors)

  15. The compatibility of chromium-aluminium steels with high pressure carbon dioxid at intermediate- temperatures; Compatibilite des aciers au chrome-aluminium avec le gaz carbonique sous pression aux temperatures moyennes

    Energy Technology Data Exchange (ETDEWEB)

    Leclercq, D; Loriers, H; David, R; Darras, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    With a view to their use in the exchangers of nuclear reactors of the graphite-gas or heavy water-gas types, the behaviour of chromium-aluminium steels containing up to 7 per cent chromium and 1.5 per cent aluminium has been studied in the presence of high-pressure carbon dioxide at temperatures of between 400 and 700 deg. C. The two most interesting grades of steel (2 per cent Cr - 0.35 per cent Al - 0.35 per cent Mo and 7 per cent Cr - 1.5 per cent Al - 0.6 per cent Si) are still compatible with carbon dioxide up to 550 and 600 deg. C respectively. A hot dip aluminised coating considerably increases resistance to oxidation of the first grade and should make possible its use up to temperatures of at least 600 deg. C. (authors) [French] Dans l'optique de leur emploi dans les echangeurs de reacteurs nucleaires des filieres graphite-gaz ou eau lourde-gaz, le comportement en presence de gaz carbonique sous pression d'aciers au chrome-aluminium, contenant jusqu'a 7 pour cent de chrome et 1,5 pour cent d'aluminium a ete etudie entre 400 et 700 deg. C. Les deux nuances les plus interessantes (2 pour cent Cr - 0,35 pour cent Al - 0,35 pour cent Mo et 7 pour cent Cr - 1,5 pour cent Al - 0,6 pour cent Si) restent compatibles avec le gaz carbonique jusqu'a 550 et 600 deg. C respectivement. Un revetement d'aluminium, effectue par immersion dans un bain fondu, ameliore notablement la resistance a l'oxydation de la premiere et doit permettre son empioi jusqu'a 600 deg. C au moins. (auteurs)

  16. Towards a paradigm shift in the modeling of soil organic carbon decomposition for earth system models

    Science.gov (United States)

    He, Yujie

    Soils are the largest terrestrial carbon pools and contain approximately 2200 Pg of carbon. Thus, the dynamics of soil carbon plays an important role in the global carbon cycle and climate system. Earth System Models are used to project future interactions between terrestrial ecosystem carbon dynamics and climate. However, these models often predict a wide range of soil carbon responses and their formulations have lagged behind recent soil science advances, omitting key biogeochemical mechanisms. In contrast, recent mechanistically-based biogeochemical models that explicitly account for microbial biomass pools and enzyme kinetics that catalyze soil carbon decomposition produce notably different results and provide a closer match to recent observations. However, a systematic evaluation of the advantages and disadvantages of the microbial models and how they differ from empirical, first-order formulations in soil decomposition models for soil organic carbon is still needed. This dissertation consists of a series of model sensitivity and uncertainty analyses and identifies dominant decomposition processes in determining soil organic carbon dynamics. Poorly constrained processes or parameters that require more experimental data integration are also identified. This dissertation also demonstrates the critical role of microbial life-history traits (e.g. microbial dormancy) in the modeling of microbial activity in soil organic matter decomposition models. Finally, this study surveys and synthesizes a number of recently published microbial models and provides suggestions for future microbial model developments.

  17. Design of Carbon Composite Driveshaft for Ultralight Aircraft Propulsion System

    Directory of Open Access Journals (Sweden)

    R. Poul

    2006-01-01

    Full Text Available This paper deals with the design of the carbon fibre composite driveshaft. This driveshaft will be used for connection between piston engine and propulsor of the type of axial-flow fan. Three different versions of driveshaft were designed and produced. Version 1 if completely made of Al alloy. Version 2 is of hybrid design where the central part is made of high strength carbon composite and flanges are made of Al alloy. Adhesive bond is used for connection between flanges and the central CFRP tube. Version 3 differs from the version 2 by aplication of ultrahigh-strength carbon fibre on the central part. Dimensions and design conditions are equal for all three versions to obtain simply comparable results. Calculations of driveshafts are described in the paper. 

  18. Performance analysis of a novel energy storage system based on liquid carbon dioxide

    International Nuclear Information System (INIS)

    Wang, Mingkun; Zhao, Pan; Wu, Yi; Dai, Yiping

    2015-01-01

    Due to the intermittence and fluctuation of wind resource, the increasing penetration level of wind power will bring huge challenges to maintain the stability of power system. Integrating compressed air energy storage (CAES) system with wind farms can weaken this negative effect. However CAES system needs large caverns or mines to store compressed air, which is restricted in application. In this paper, a novel energy storage system based on liquid carbon dioxide is presented. The mathematical models of compressed liquid-carbon dioxide energy storage system are developed. The parametric analysis is conducted to examine the effect of some key thermodynamic parameters on the system performance. Compared with AA-CAES, the liquid carbon dioxide energy storage system has advantages such as a high energy density, high EVR. Moreover, the round trip efficiency of this system can reach about 56.64%, which is acceptable in consideration of the storage volume. Therefore, this proposed system has a good potential for storing wind power in large scale and offers an attractive solution to the challenges of the increasing penetration level of wind power. - Highlights: • A novel energy storage system based on liquid carbon dioxide is presented. • The effects of some key parameters on the system performance are studied. • The operation optimization is conducted by genetic algorithm. • Comparative analysis of AA-CAES and liquid carbon dioxide system is studied.

  19. Contribution to the activation analysis of the rare gases. Contribution to the analysis of carbon monoxide and water vapour in gases (1963); Contribution a l'analyse par activation des gaz rares. Contribution a l'analyse de l'oxyde de carbone et de la vapeur d'eau dans les gaz (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Diebolt, J [Commisariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1963-07-15

    In the present work, we have applied radioactive analysis to the general technique of rare gas separation. This separation is carried out on active charcoal, at constant pressure. The desorption of the gas is caused by an increase in the initial temperature of adsorption. These separations are quantitative and can be confirmed by chemical analysis. The volumes of desorbed gas are measured by radioactive counting. We have also used radioactivation to study the reduction of palladous chloride by carbon monoxide. Since this reduction is quantitative, we can have a knowledge of the mass of palladium reduced by measuring its activity. We have used the property which have organic chlorides of being hydrolysed by water vapour and of liberating hydrochloric acid to study quantitatively the amount of water vapour which a gas contains. The hydrochloric acid formed is measured by activation of the chlorine in the acid. (author) [French] Dans les travaux que nous presentons, nous avons applique l'analyse par radioactivation, a la technique generale de separation des gaz rares. Cette separation est faite sur charbon active, a pression constante. La desorption des gaz est provoquee par une augmentation de la temperature initiale d'adsorption. Ces separations sont quantitatives, et peuvent etre exploitees par l'analyse chimique. Les volumes de gaz dedorbes sont mesures par comptage de la radioactivite. Nous avons egalement utilise la radioactivation pour l'etude de la reduction du chlorure palladeux par l'oxyde de carbone. Cette reduction etant quantitative, nous pouvons connaitre la masse de palladium reduit par la mesure de son activite. Nous avons exploite la propriete que possede un chlorure organique d'etre hydrolise par la vapeur d'eau et de liberer de l'acide chlorhydrique pour etudier quantitativement la vapeur d'eau contenue dans un gaz. L'acide chlorhydrique forme est mesure par l'activation du chlore de l'acide. (auteur)

  20. Spacesuit Integrated Carbon Nanotube Dust Mitigation System for Lunar Exploration

    Science.gov (United States)

    Manyapu, Kavya Kamal

    Lunar dust proved to be troublesome during the Apollo missions. The lunar dust comprises of fine particles, with electric charges imparted by solar winds and ultraviolet radiation. As such, it adheres readily, and easily penetrates through smallest crevices into mechanisms. During Apollo missions, the powdery dust substantially degraded the performance of spacesuits by abrading suit fabric and clogging seals. Dust also degraded other critical equipment such as rovers, thermal control and optical surfaces, solar arrays, and was thus shown to be a major issue for surface operations. Even inside the lunar module, Apollo astronauts were exposed to this dust when they removed their dust coated spacesuits. This historical evidence from the Apollo missions has compelled NASA to identify dust mitigation as a critical path. This important environmental challenge must be overcome prior to sending humans back to the lunar surface and potentially to other surfaces such as Mars and asteroids with dusty environments. Several concepts were successfully investigated by the international research community for preventing deposition of lunar dust on rigid surfaces (ex: solar cells, thermal radiators). However, applying these technologies for flexible surfaces and specifically to spacesuits has remained an open challenge, due to the complexity of the suit design, geometry, and dynamics. The research presented in this dissertation brings original contribution through the development and demonstration of the SPacesuit Integrated Carbon nanotube Dust Ejection/Removal (SPIcDER) system to protect spacesuits and other flexible surfaces from lunar dust. SPIcDER leverages the Electrodynamic Dust Shield (EDS) concept developed at NASA for use on solar cells. For the SPIcDER research, the EDS concept is customized for application on spacesuits and flexible surfaces utilizing novel materials and specialized design techniques. Furthermore, the performance of the active SPIcDER system is enhanced

  1. Estimation of carbon flow in a Calluna heath system

    International Nuclear Information System (INIS)

    Roesberg, I.; Oevstedal, D.O.; Seljelid, R.; Schreiner, Oe.; Goksoeyr, J.

    1981-01-01

    In a Culluna heath, plots of 1 m 2 were pulse labelled with 14 CO 2 , and the radioactivity in vegetation above ground, roots, litter and soil organic matter followed for almost two years. In a separate experiment, radioactivity in above ground and root respiration and in soil microbial biomass was determined. A kinetic model for the carbon transfer reaction is presented, and shown to give a satisfactory agreement with the experimental data. The results demonstrate that a major part of the assimilated carbon passes through the roots and into the soil, where it is rapidly mineralized. (author)

  2. Effects of confinement in meso-porous silica and carbon nano-structures; Etude des effets de confinement dans la silice mesoporeuse et dans certaines nanostructures carbonees

    Energy Technology Data Exchange (ETDEWEB)

    Leon, V

    2006-07-15

    Physico-chemical properties of materials can be strongly modified by confinement because of the quantum effects that appear at such small length scales and also because of the effects of the confinement itself. The aim of this thesis is to show that both the nature of the confining material and the size of the pores and cavities have a strong impact on the confined material. We first show the effect of the pore size of the host meso-porous silica on the temperature of the solid-solid phase transition of silver selenide, a semiconducting material with enhanced magnetoresistive properties under non-stoichiometric conditions. Narrowing the pores from 20 nm to 2 nm raises the phase transition temperature from 139 C to 146 C. This result can be explained by considering the interaction between the confining and confined materials as a driving force. The effects of confinement are also studied in the case of hydrogen and deuterium inside cavities of organized carbon nano-structures. The effects that appear in the adsorption/desorption cycles are much stronger with carbon nano-horns as the host material than with C60 pea-pods and single-walled carbon nano-tubes. (author)

  3. Carbonization

    Energy Technology Data Exchange (ETDEWEB)

    Hennebutte, H G; Goutal, E

    1921-07-04

    Materials such as coal, peat, or schist are subjected to a rising temperature in successive stages in apparatus in which the distillation products are withdrawn at each stage. For example in a three-stage process, the acid products of the first or low-temperature stage are fixed in a suitable reagent, the basic products from a second or higher-temperature stage are absorbed in an acid reagent, hydrocarbons being retained by solvents, while the third are subjected to a pyrogenation process carried out in a closed vessel. Wherein the material is subjected in stages to a rising temperature, the gasified products being withdrawn at each stage, and are prevented as far as possible from mixing with the carbonized products.

  4. Optoelectronic system of online measurements of unburned carbon in coal fly ash

    Science.gov (United States)

    Golas, Janusz; Jankowski, Henryk; Niewczas, Bogdan; Piechna, Janusz; Skiba, Antoni; Szkutnik, Wojciech; Szkutnik, Zdzislaw P.; Wartak, Ryszarda; Worek, Cezary

    2001-08-01

    Carbon-in-ash level is an important consideration for combustion efficiency as well as ash marketing. The optoelectronic analyzing system for on-line determination and monitoring of the u burned carbon content of ash samples is presented. The apparatus operates on the principle that carbon content is proportional to the reflectance of IR light. Ash samples are collected iso kinetically from the flue gas duct and placed in a sample tube with a flat glass bottom. The same is then exposed to a light. The reflectance intensity is used by the system's computer to determine residual carbon content from correlation curves. The sample is then air purged back to the duct or to the attached sample canister to enable laboratory check analysis. The total cycle time takes between 5 and 10 minutes. Real time result of carbon content with accuracy 0.3-0.7 percent are reported and can be used for boiler controlling.

  5. Des Connaissances Aux Politiques

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les synergies ont été mises en commun au fur et à mesure des progrès de la recherche. .... Recherche normative (sur le rôle et la performance des institutions .... Système national d'information sur la gestion environnementale connecté à 19 ...... Un fort contrôle centralisé sur l'élaboration des politiques nationales peut ...

  6. Calculation on uranium carbon oxygen system molecular structure by DFT

    International Nuclear Information System (INIS)

    Zhang Guangfeng; Wang Xiaolin; Zou Lexi; Sun Ying; Xue Weidong; Zhu Zhenghe; Wang Hongyan

    2001-01-01

    The authors study on the possible molecular structures U-C-O, U-O-C, C-U-O (angular structure C a nd linear structure C ∞υ ) of carbon monoxide interacting on uranium metal surface by Density functional theory (DFT). The uranium atom is used RECP (Relativistic Effective Core Potential) and contracted valence basis sets (6s5p2d4f)/[3s3p2d2f], and for carbon and oxygen atoms all are 6-311G basis sets. The author presents the results of energy optimum which shows that triple and quintuple state are more stable. The authors get the electronic state, geometry structure, energy, harmonic frequency, mechanical property, etc. of these twelve triple and quintuple state relative stable structures. The normal vibrational analytical figure of angular structure (C s ) and linear structure (C ∞υ ) is given at the same time. It is indicated that angular structure has lower energy than linear structure, moreover the angular structure of U-C-O( 3 A ) has the lowest energy. The bond strength between uranium atom and carbon monoxide is weak and between uranium atom and oxygen atom is slightly stronger than between uranium atom and carbon atom which the authors can know by superposition population and bond energy analysis among atoms

  7. In pursuit of carbon accountability: the politics of REDD+ measuring, reporting and verification systems

    NARCIS (Netherlands)

    Gupta, A.; Lövbrand, E.; Turnhout, E.; Vijge, M.J.

    2012-01-01

    This article reviews critical social science analyses of carbonaccounting and monitoring, reporting and verification (MRV) systems associated with reducing emissions from deforestation, forest degradation and conservation, sustainable use and enhancement of forest carbon stocks (REDD+). REDD+ MRV

  8. Evolution and Adaptation of Phytoplankton Photosynthetic Pathways to perturbations of the geological carbon system

    Science.gov (United States)

    Rickaby, R. E.; Young, J. N.; Hermoso, M.; Heureux, A.; McCLelland, H.; Lee, R.; Eason Hubbard, M.

    2012-12-01

    The ocean and atmosphere carbon system has varied greatly over geological history both in response to initial evolutionary innovation, and as a driver of adaptive change. Here we establish that positive selection in Rubisco, the most abundant enzyme on the Earth responsible for all photosynthetic carbon fixation, occurred early in Earth's history, and basal to the radiation of the modern marine algal groups. Our signals of positive selection appear to be triggered by changing intracellular concentrations of carbon dioxide (CO2) due to the emergence of carbon concentrating mechanisms between 1.56 and 0.41 Ba in response to declining atmospheric CO2 . We contend that, at least in terms of carbon, phytoplankton generally were well poised to manage subsequent abrupt carbon cycle perturbations. The physiological pathways for optimising carbon acquisition across a wide range of ambient carbon dioxide concentrations had already been established and were genetically widespread across open ocean phytoplankton groups. We will further investigate some case studies from the Mesozoic and Cenozoic abrupt carbon cycle excursions using isotopic tools to probe the community photosynthetic response and demonstrate the flexibility of phytoplankton photosynthesis in the face of major perturbations. In particular, an unprecedented resolution record across the Toarcian (Early Jurassic) carbon isotope excursion in the Paris Basin reveals a selection and evolution towards a community reliant solely on diffusive carbon dioxide supply for photosynthesis at the height of the excursion at 1500-2500 ppm CO2. The continued flourishing of the phytoplankton biological pump throughout this excursion was able to remove the excess carbon injected into the water column in less than 45 kyrs.

  9. Évaluation des pratiques agricoles des légumes feuilles : le cas des ...

    African Journals Online (AJOL)

    SARAH

    30 sept. 2017 ... ... de Biochimie et Immunologie Appliquée, Centre de Recherche en Sciences Biologiques, Alimentaires et .... l'intoxication des agriculteurs et des consommateurs, ... source d'alimentation en eau et au pouvoir d'achat des.

  10. Radiological diagnostics of malignant tumors of the musculoskeletal system in childhood and adolescence; Radiologische Diagnostik maligner Tumoren des Muskuloskelettalsystems im Kindes- und Adoleszentenalter

    Energy Technology Data Exchange (ETDEWEB)

    Nemec, S.F.; Krestan, C.R. [Medizinische Universitaet Wien, Klinische Abteilung fuer Neuroradiologie und muskuloskelettale Radiologie, Wien (Austria); Hojreh, A.; Hoermann, M. [Medizinische Universitaet Wien, Klinische Abteilung fuer Allgemeine Radiologie und Kinderradiologie, Wien (Austria)

    2008-10-15

    Rhabdomyosarcoma, osteosarcoma and Ewing's sarcoma are the most common malignant tumors of the musculoskeletal system in childhood and adolescence representing about 10% of newly diagnosed cancers in children and adolescents. In the last two decades the prognosis of patients with such malignancies improved significantly. On the one hand because of the advances in chemotherapy and orthopedic surgery, on the other hand also because of the innovations in radiological diagnostics. The precise pre-therapeutical staging of tumors of the musculoskeletal system provides important prognostic information and has impact on the entire therapy management. During respectively after therapy, imaging is extremely important in the follow-up and in diagnosing a possible recurrent disease. Modern imaging diagnostics of musculoskeletal tumors basically consist of conventional X-ray, of computed tomography (CT) and magnetic resonance imaging (MRI), and of modalities of nuclear medicine such as szintigraphy, positron emission tomography (PET) and PET CT. (orig.) [German] Das Rhabdomyosarkom, das Osteosarkom und das Ewing-Sarkom sind die am haeufigsten auftretenden malignen Tumoren des Muskuloskelettalsystems im Kindes- und Adoleszentenalter. Diese Erkrankungen repraesentieren etwa 10% der bei Kindern und Jugendlichen neu diagnostizierten Tumoren. In den letzten beiden Jahrzehnten hat sich insgesamt die Prognose der Patienten mit solchen Malignomen deutlich gebessert. Einerseits aufgrund der Fortschritte in der Chemotherapie und orthopaedischen Tumorchirurgie, andererseits nicht zuletzt aufgrund der zahlreichen Innovationen der radiologischen Diagnostik. Das praezise praetherapeutische Staging von Tumoren des Muskuloskelettalsystems liefert wichtige prognostische Informationen und beeinflusst das gesamte Therapiemanagement. Waehrend bzw. nach erfolgter Therapie ist die Bildgebung ganz entscheidend im Follow-up und bei der Diagnostik einer moeglichen Rezidiverkrankung. Die moderne

  11. Barriers to Systemic, Effective, and Sustainable Technology Use in High School Classrooms / Obstacles à l’utilisation systémique, efficace et durable de la technologie dans les salles de classe des écoles secondaires

    Directory of Open Access Journals (Sweden)

    Jason Scott Daniels

    2014-01-01

    Full Text Available The purpose of the Technology and High School Success (THSS initiative was to encourage innovative strategies focused on improving provincial high school completion rates, using technology and student-centered learning to engage student interest. The primary purpose of this paper is to report on barriers that impede systemic, effective and sustainable technology integration within schools. Even with teacher and administrative support and commitment for THSS, evaluative research indicated minimal change in system capacity as a result of the initiative. Three primary barriers to program sustainability were: 1 schools and school districts did not leverage the opportunity to revisit their existing vision(s, 2 schools and school districts did not use data to make changes, and 3 limited access to technology. Le but de l’initiative « Technology and High School Success (THSS » était d'encourager des stratégies novatrices visant à améliorer le taux d’achèvement des études secondaires dans la province de l’Alberta en utilisant la technologie et un apprentissage centré sur l'élève afin de susciter l'intérêt des élèves. L'objectif principal de cet article est de rendre compte des obstacles entravant l'intégration systémique, efficace et durable de la technologie dans les écoles. La recherche évaluative a révélé des changements minimes dans la capacité systémique à la suite de l'initiative, et ce, malgré l’appui et l’engagement des enseignants et des administrateurs envers le THSS. Les trois obstacles principaux à la viabilité du programme sont les suivants: 1 les écoles et les districts scolaires n'ont pas profité de l’occasion pour revoir leur(s vision(s, 2 les écoles et les districts scolaires n'ont pas utilisé les données pour effectuer des changements, et 3 l'accès limité à la technologie.

  12. Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

    Science.gov (United States)

    Veres, Teodor

    Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques

  13. Carbon footprinting of emergency medical services systems: a proof-of-concept study.

    Science.gov (United States)

    Blanchard, Ian; Brown, Lawrence H

    2009-01-01

    In this proof-of-concept study, we evaluated the availability of emergency medical services (EMS) system energy consumption data required to calculate a carbon footprint. Two diverse North American EMS systems with more than 125,000 combined annual unit responses agreed to report their energy consumption for the last fiscal or calendar year using a data-collection tool based on Carbon Trust recommendations. They also identified the source of information (e.g., bills, logs, receipts), whether the amounts reported were directly measured or estimated, and whether any of the amounts were prorated from shared facilities (e.g., electricity for a shared office building). For this proof-of-concept study, we report only descriptive data about the availability of data and aggregate carbon emissions. Both systems reported diesel fuel, gasoline, and electricity consumption. One system used natural gas; one system used aviation fuel. Direct measurement of consumption using utility bills and statements was possible for these energy types. One system prorated natural gas and electricity usage; one system was able to estimate commercial air travel. Annual carbon dioxide (CO(2)) emissions for these two systems totaled 11.1 million pounds of CO(2). The largest source of CO(2) emissions was diesel fuel (39%), followed by electricity (23%). These EMS systems were able to provide the data necessary to determine their carbon footprints. Future research could include broader study to establish EMS-specific norms for carbon emissions, benchmarking of these metrics between different EMS systems, and the assessment of programs designed to reduce EMS carbon emissions.

  14. Clinical indications for high-resolution MRI diagnostics of the peripheral nervous system; Klinische Indikationen hochaufloesender MRT-Diagnostik des peripheren Nervensystems

    Energy Technology Data Exchange (ETDEWEB)

    Godel, T. [Universitaetsklinikum Heidelberg, Abteilung fuer Neuroradiologie, Heidelberg (Germany); Weiler, M. [Universitaetsklinikum Heidelberg, Neurologische Klinik, Heidelberg (Germany)

    2017-03-15

    Peripheral neuropathies are common and diagnostically often challenging disorders. Difficulties particularly exist in lesion localization and recognition of complex spatial lesion patterns. Medical history taking, neurological examination, neurophysiological tests and nerve ultrasonography represent the gold standard in the diagnosis of peripheral nerve lesions but have known methodical limitations. The use of 3 Tesla magnetic resonance neurography (MRN) is an additional diagnostic imaging tool recently developed for the high-resolution visualization of long segments of peripheral nerves. Reasonable clinical indications for MRN are exemplarily presented. Using MRN a direct visualization and thus precise localization of focal and non-focal peripheral nerve lesions of various origins can be achieved with high spatial resolution down to the anatomical level of nerve fascicles. Using MRN large anatomical areas of the peripheral nervous system (PNS) can be covered in a single examination session, spatial nerve lesion patterns can be evaluated and the underlying causes can often be detected. The MRN is a valuable supplement to the diagnostic work-up of the PNS, especially in cases that cannot be clarified with standard diagnostic methods. Evaluation of the spatial nerve lesion pattern gives additional information on the origin of the underlying disease. Reasonable indications for MRN are the assessment of proximal nerve structures including the brachial and lumbosacral nerve plexi, the clarification of inconclusive diagnostic results, preoperative, postoperative and posttraumatic assessments, the identification of fascicular nerve lesions and the differential diagnosis of an alleged somatoform disorder. (orig.) [German] Periphere Neuropathien sind haeufige und diagnostisch mitunter anspruchsvolle Erkrankungen. Schwierigkeiten bestehen v. a. bei der Laesionslokalisation und Erkennung komplexer Laesionsmuster. Anamnese, klinisch-neurologische Untersuchung

  15. Can a carbon permit system reduce Spanish unemployment?

    International Nuclear Information System (INIS)

    Faehn, Taran; Gomez-Plana, Antonio G.; Kverndokk, Snorre

    2009-01-01

    This paper analyses the impact of carbon policy on unemployment in Spain and whether recycling the public revenues earned from permit auctions can alleviate this problem. While Spain's deviation from the European Union's intermediate emission goals is more serious than most other member countries' unemployment in Spain is also well above average for the European Union. We use a computable general equilibrium model that includes unemployment in the markets for unskilled and skilled labour. We find that introducing carbon permits does not aggravate Spanish unemployment. In fact, if supplied with revenue recycling schemes, unemployment rates may actually fall. Contrary to other European studies, we find that the best option is to reduce payroll taxes on relatively skilled types of labour. This reform is successful in both increasing labour demand and dampening the supply response to rising wages. However, while all of the recycling schemes generate dividends in terms of aggregate welfare, none entirely offsets the abatement costs. (author)

  16. Nuclear Energy and Renewables interaction: System Effects in Low-carbon Electricity Systems

    International Nuclear Information System (INIS)

    Keppler, Jan Horst; Cometto, Marco

    2013-01-01

    This report presents a synthesis of the OECD/NEA study 'Nuclear Energy and Renewables: System Effects in Low-carbon Electricity Systems'. It addresses the increasingly important interactions of variable renewables and dispatchable energy technologies, such as nuclear power, in terms of their effects on electricity systems. These effects add costs to the production of electricity, which are not usually transparent. The report recommends that decision-makers should take into account such system costs and internalise them according to a 'generator pays' principle, which is currently not the case. Analysing data from six OECD/NEA countries, the study finds that including the system costs of variable renewables at the level of the electricity grid increases the total costs of electricity supply by up to one-third, depending on technology, country and penetration levels. In addition, it concludes that, unless the current market subsidies for renewables are altered, dispatchable technologies will increasingly not be replaced as they reach their end of life and consequently security of supply will suffer. This implies that significant changes in management and cost allocation will be needed to generate the flexibility required for an economically viable coexistence of nuclear energy and renewables in increasingly de-carbonised electricity systems

  17. Sample distillation/graphitization system for carbon pool analysis by accelerator mass spectrometry (AMS)

    International Nuclear Information System (INIS)

    Pohlman, J.W.; Knies, D.L.; Grabowski, K.S.; DeTurck, T.M.; Treacy, D.J.; Coffin, R.B.

    2000-01-01

    A facility at the Naval Research Laboratory (NRL), Washington, DC, has been developed to extract, trap, cryogenically distill and graphitize carbon from a suite of organic and inorganic carbon pools for analysis by accelerator mass spectrometry (AMS). The system was developed to investigate carbon pools associated with the formation and stability of methane hydrates. However, since the carbon compounds found in hydrate fields are ubiquitous in aquatic ecosystems, this apparatus is applicable to a number of oceanographic and environmental sample types. Targeted pools are dissolved methane, dissolved organic carbon (DOC), dissolved inorganic carbon (DIC), solid organic matrices (e.g., seston, tissue and sediments), biomarkers and short chained (C 1 -C 5 ) hydrocarbons from methane hydrates. In most instances, the extraction, distillation and graphitization events are continuous within the system, thus, minimizing the possibility of fractionation or contamination during sample processing. A variety of methods are employed to extract carbon compounds and convert them to CO 2 for graphitization. Dissolved methane and DIC from the same sample are sparged and cryogenically separated before the methane is oxidized in a high temperature oxygen stream. DOC is oxidized to CO 2 by 1200 W ultraviolet photo-oxidation lamp, and solids oxidized in sealed, evacuated tubes. Hydrocarbons liberated from the disassociation of gas hydrates are cryogenically separated with a cryogenic temperature control unit, and biomarkers separated and concentrated by preparative capillary gas chromatography (PCGC). With this system, up to 20 samples, standards or blanks can be processed per day

  18. Cavitation dispersion of carbon nanotubes and modification of cement systems

    Directory of Open Access Journals (Sweden)

    GUSEV Boris Vladimirovich

    2014-12-01

    Full Text Available The most common research areas in construction material science deals with the development of new efficient methods to increase strength properties of materials. One of such methods is modification of composite matrices with carbon nanotubes. The characteristics of nanomodified concretes to a great extent depend on selected method of introduction of carbon nanotubes into material. The predispersion of CNT in mixing water with plasticizing additive through ultrasound impact on the environment with colloid and other types of particles including nanoparticles is the most frequently used scientific method which provides even distribution of nanoparticles in cement. In some works the separation of agglomerated CNT in suspension was conducted by means of ultrasound treatment. The further analysis showed that the main drawbacks of ultrasound dispersion are high energy output and low performance. That causes inconvenience for application of them in manufacturing process. The methods of cavitation dispersion which were developed in the late 90ies in the XXI century today are becoming commonly used in practice. The work presents the results of dispersion of multi-layer nanotubes performed on the hydrodynamic cavitation equipment. It was determined that the use of such equipment makes it possible to produce stable and even carbon dispersions and to introduce and distribute them uniformly in concrete in the same way as in the case when ultrasound treatment is performed. The advantages of this technology are considerable decrease of energy consumption and possibility to treat enormous amounts of liquids which are necessary for modification of concrete in real production process.

  19. Carbon stock assessment of two agroforestry systems in a tropical forest reserve in the Philippines

    Energy Technology Data Exchange (ETDEWEB)

    Lasco, R.D.; Sales, R.F.; Estrella, R.; Saplaco, S.R.; Castillo, A.S.A.; Cruz, R.V.O.; Pulhin, F.B. [University of Philippines Los Banos, Laguna (Philippines). College of Forestry & Natural Resources Environmental Forestry Programme

    2001-07-01

    Carbon dioxide is the most abundant greenhouse gas (GHG) that causes global warming. Thus, land uses such as an agroforestry system have a significant role in moderating climate change since they can be sources and sinks of carbon. The aim of the study was to generate data on the carbon stocks of two agroforestry systems, specifically a Gmelina arborea-Theobroma cacao multistorey system and an alley cropping system with Gliricidia sepium hedges at the agroforestry research and demonstration area inside a forest reserve in Southern Luzon, Philippines. The multistorey system had a mean biomass of 258 Mg C ha{sup -1} and a carbon density of 185 Mg C ha{sup -1}. Carbon was stored in the various pools in the following order of magnitude: soil > tree biomass (above-ground) > necromass > understorey vegetation > roots. The Gliricidia hedgerow had a biomass density of 3.8 Mg C ha{sup -1}; total carbon density was 93 Mg C ha{sup -1}, of which 92 Mg C ha{sup -1} was in the soil.

  20. Stalagmite carbon isotopes and dead carbon proportion (DCP) in a near-closed-system situation: An interplay between sulphuric and carbonic acid dissolution

    Science.gov (United States)

    Bajo, Petra; Borsato, Andrea; Drysdale, Russell; Hua, Quan; Frisia, Silvia; Zanchetta, Giovanni; Hellstrom, John; Woodhead, Jon

    2017-08-01

    In this study, the 'dead carbon proportion' (DCP) calculated from combined U-Th and radiocarbon analyses was used to explore the carbon isotope systematics in Corchia Cave (Italy) speleothems, using the example of stalagmite CC26 which grew during the last ∼12 ka. The DCP values in CC26 are among the highest ever recorded in a stalagmite, spanning the range 44.8-68.8%. A combination of almost closed-system conditions and sulphuric acid dissolution (SAD) are proposed as major drivers in producing such a high DCP with minor contribution from old organic matter from the deep vadose zone. The long-term decrease in both DCP and δ13C most likely reflects post-glacial soil recovery above the cave, with a progressive increase of soil CO2 contribution to the total dissolved inorganic carbon (DIC). Pronounced millennial-scale shifts in DCP and relatively small coeval but antipathetic changes in δ13C are modulated by the effects of hydrological variability on open and closed-system dissolution, SAD and prior calcite precipitation. Hence, the DCP in Corchia Cave speleothems represents an additional proxy for rainfall amount.

  1. ``Stacked reservoirs`` in the Zechstein 2 carbonate (Ca2): inversion tectonics in the pre-Zechstein subdivision-saline base of the Lower Saxony basin (Germany); ``Stacked Reservoirs`` im Zechstein 2 Karbonat (Ca2): Inversionstektonik im prae-Zechstein-salinaren Sockel des Niedersaechsischen Beckens (NW-Deutschland)

    Energy Technology Data Exchange (ETDEWEB)

    Rockenbauch, K.; Brauckmann, F.; Schaefer, H.G.; Utermoehlen, S. [BEB Erdgas und Erdoel GmbH, Hannover (Germany)

    1998-12-31

    This article looks at areas in the Lower Saxony basis of North-West Germany where the carbonate of the 2nd Zechstein subdivision cycle (Ca2) was tectonically removed from its stratigraphic compound and is found in several stacks elsewhere. Modern 3D seismology and deep drillings were evaluated and tectonic models were developed which could be compared with examples from other saline provinces. This revealed new aspects of exploration for sour natural gas in the Zechstein subdivision (orig.). [Deutsch] Der Artikel behandelt Bereiche innerhalb des Niedersaechsischen Beckens von Nordwestdeutschland, wo das Karbonat des 2. Zechstein-Zyklus (Ca2) tektonisch aus seinem stratigraphischen Verband geloest wurde und an anderer Stelle mehrfach uebereinander gestapelt anzutreffen ist. Hierzu wurden moderne 3D Seismik sowie Tiefbohrungen ausgewertet und tektonische Modelle entwickelt, die mit Beispielen aus anderen Salinarprovinzen verglichen wurden. Hinsichtlich der Exploration auf Sauergas im Zechstein ergeben sich daraus neue Aspekte und Moeglichkeiten. (orig.)

  2. A Silicon detector system on carbon fiber support at small radius

    International Nuclear Information System (INIS)

    Johnson, Marvin E.

    2004-01-01

    The design of a silicon detector for a p(bar p) collider experiment will be described. The detector uses a carbon fiber support structure with sensors positioned at small radius with respect to the beam. A brief overview of the mechanical design is given. The emphasis is on the electrical characteristics of the detector. General principles involved in grounding systems with carbon fiber structures will be covered. The electrical characteristics of the carbon fiber support structure will be presented. Test results imply that carbon fiber must be regarded as a conductor for the frequency region of interest of 10 to 100 MHz. No distinction is found between carbon fiber and copper. Performance results on noise due to pick-up through the low mass fine pitch cables carrying the analogue signals and floating metal is discussed

  3. Carbon formation and metal dusting in hot-gas cleanup systems of coal gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    Judkins, R.R.; Tortorelli, P.F.; Judkins, R.R.; DeVan, J.H.; Wright, I.G. [Oak Ridge National Lab., TN (United States). Metals and Ceramics Div.

    1995-11-01

    The product gas resulting from the partial oxidation of Carboniferous materials in a gasifier is typically characterized by high carbon and sulfur, but low oxygen, activities and, consequently, severe degradation of the structural and functional materials can occur. The objective of this task was to establish the potential risks of carbon deposition and metal dusting in advanced coal gasification processes by examining the current state of knowledge regarding these phenomena, making appropriate thermochemical calculations for representative coal gasifiers, and addressing possible mitigation methods. The paper discusses carbon activities, iron-based phase stabilities, steam injection, conditions that influence kinetics of carbon deposition, and influence of system operating parameters on carbon deposition and metal dusting.

  4. High multiplicity states in disordered carbon systems: Ab initio and semiempirical study

    International Nuclear Information System (INIS)

    Khavryuchenko, Volodymyr D.; Khavryuchenko, Oleksiy V.; Lisnyak, Vladyslav V.

    2010-01-01

    Stability of non-zero spin projection states for disordered carbon clusters of low symmetry were examined using semiempirical and ab initio methods. The study proves previous results of V.D. Khavryuchenko, Y.A. Tarasenko, V.V. Strelko, O.V. Khavryuchenko, V.V. Lisnyak, Int. J. Mod. Phys. B 21 (2007) 4507, obtained for the large polyaromatic hydrocarbons clusters and shows that the phenomenon is intrinsic for carbon-rich systems and independent of their symmetries. The electronic properties of the carbon clusters may alter from insulating to semiconducting upon change of C/H ratio and stabilization of non-zero spin projection states. A partial collectivization of the electrons is observed in deeply carbonized carbon clusters in higher S z states.

  5. Biological regeneration of humic acid-loaded partially exhausted activated carbon (down flow system)

    International Nuclear Information System (INIS)

    Durrani, M.A.Q.J.; Martin, R.J.; Khaliq, F.

    1995-01-01

    This paper represents the report on the biological regeneration of partially exhausted (down flow) activated carbon following the experimental studies carried out at the university of Birmingham, UK. The Research investigated the extent of bio regeneration of humic acid of concentration 100 mg/l. Bio regeneration in the partial exhaustion system (down flow) was evaluated in terms of substrate removal. Bacterial counts in the effluents of regenerated GAC columns were significantly more than those of fresh carbon effluents. The regeneration performance of the bio regeneration, partially exhausted (with humic acid) carbon increased during initial cycles, later on, it deteriorated significantly with each successive regeneration cycle. Microbial fouling of the carbon, especially at the bottom of the carbon bed was found to produce a substantial deterioration of the bio regeneration performance. (author)

  6. The energy sector between the two poles of the free market system and the public service obligations. Potential and limitations of state control, with an emphasis on the act for reform of the energy industry law (ENG) and the EU Internal Market Directive; Der Energiesektor zwischen Marktwirtschaft und oeffentlicher Aufgabe. Moeglichkeiten und Grenzen staatlicher Steuerung unter besonderer Beruecksichtigung des Gesetzes zur Neuregelung des Energiewirtschaftsrechts und des Europarechts

    Energy Technology Data Exchange (ETDEWEB)

    Hoelzer, F.

    2000-07-01

    In Part A of the book it will be brought out that despite differing conceptual starting points and despite state control's way of working, there is no alternative to legal control. In co-operative models and consensual solutions in those states with private sector service providers, which exist in diverse forms in the energy sector, too, the law operates as a framework or regulatory warning, or it has a reserve function. An end to state control is not linked to that because the state remains responsible for the achievement of the goals the notification ans definition of which it undertakes as a public duty. The results found are discussed and confirmed in Part B of the book in connection with the reform of the legal framework of the energy industry (the German act named ENG). In Part C of the book it will be shown to what extent legal constitutional limitations stand in the way of state control in the energy sector. (orig./CB) [German] Im ersten Teil der Arbeit wird staatliche Steuerung durch Recht an Beispielen des Energiesektors untersucht, wobei insbesondere Fragen des Wirkens und der Erscheinungsformen staatlicher Steuerung sowie die Auswirkungen der Veraenderung staatlicher Steuerung auf die Rolle des Staates und auf das Verhaeltnis von Staat und Gesellschaft im Vordergrund stehen. Im zweiten Teil werden unter besonderer Beruecksichtigung der europarechtlichen Regelungen die Moeglichkeiten, rechtliche Grenzen und Maengel staatlicher Steuerung im bisherigen System der Elektrizitaetsversorgung in Deutschland dargestellt, da Reformen, um dem Steuerungsanspruch des Staates gerecht zu werden, diesezu beachten haben. Es wird u.a. untersucht, inwieweit Entstaatlichungsstrategien im Rahmen der Reformen im Energiesektor Anwendung finden. Im dritten Teil werden die verfassungsrechtlichen Restriktionen untersucht. (orig./CB)

  7. Evidence of different stoichiometries for the limiting carbonate complexes of lanthanides(3); Mise en evidence d'un changement de stoechiometrie du complexe carbonate limite au sein de la serie des lanthanides(3)

    Energy Technology Data Exchange (ETDEWEB)

    Philippini, V

    2007-12-15

    Two stoichiometries have been proposed by different laboratories to interpret measurements on the limiting carbonate complexes of An{sup 3+} and Ln{sup 3+} cations. The study of the solubility of double carbonates (AlkLn(CO{sub 3}){sub 2},xH{sub 2}O) in concentrated carbonate solutions at room temperature and high ionic strengths has shown that on the one hand the lightest lanthanides (La and Nd) form Ln(CO{sub 3}){sub 4}{sup 5-} whereas the heaviest (Eu and Dy) form Ln(CO{sub 3}){sub 3}{sup 3-} in the studied chemical conditions, and on the other hand, that the kinetics of precipitation of double carbonates depends on the alkali metal and the lanthanide ions. The existence of two stoichiometries for the limiting carbonate complexes was confirmed by capillary electrophoresis hyphenated to an inductively coupled plasma mass spectrometer (CE-ICP-MS), used to extend the study to the whole series of lanthanides (except Ce, Pm and Yb). Two behaviours have been put forward comparing the electrophoretic mobilities: La to Tb form Ln(CO{sub 3}){sub 4}{sup 5-} while Dy to Lu form Ln(CO{sub 3}){sub 3}{sup 3-}. Measurements by time resolved laser fluorescence spectroscopy (TRLFS) on Eu(III) indicate small variations of the geometry of Eu(CO{sub 3}){sub 3}{sup 3-} complex, specially with Cs{sup +}. Although analogies are currently used among the 4f-block trivalent elements, different aqueous speciations are evidenced in concentrated carbonate solutions across the lanthanide series. (author)

  8. Carbon Monitoring System Flux for Fossil Fuel L4 V1 (CMSFluxFossilfuel) at GES DISC

    Data.gov (United States)

    National Aeronautics and Space Administration — This dataset provides the Carbon Flux for Fossil Fuel. The NASA Carbon Monitoring System (CMS) is designed to make significant contributions in characterizing,...

  9. Study of superconductors of the second type in the lead-thallium system; Etude des supraconducteurs de la deuxieme espece du systeme plomb-thallium

    Energy Technology Data Exchange (ETDEWEB)

    Bon Mardion, G [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1965-07-01

    The author has shown by magnetization measurements on lead-thallium alloys having from 5 to 70 atom per cent of thallium, that superconductors of the second type definitively exist. The results obtained, in particular on the upper critical field H{sub C2} are in good agreement with the models of Ginzburg, Landau, Abrikosov, Gorkov and Goodman. Finally resistivity measurements have confirmed the occurrence of a fourth upper critical field, the existence of which has been theoretically predicted by St James and de Gennes. (author) [French] L'auteur par des mesures d'aimantation sur les alliages plomb-thallium, de composition variant de 5 pour cent a 70 pour cent At. de thallium, a montre qu'il fallait admettre definitivement l'existence des supraconducteurs de la deuxieme espece. Les resultats obtenus, en particulier sur le champ critique superieur H{sub c2} sont en bon accord avec les modeles de Ginzburg, Landau, Abrikosov, Gorkov et Goodman. Enfin des mesures de resistivite ont confirme l'existence d'un quatrieme champ critique superieur H{sub c3}, existence prevue theoriquement par St James et de Gennes. (auteur)

  10. Gestion des risques

    CERN Document Server

    Louisot, Jean-Paul

    2009-01-01

    Depuis le début du lie siècle, la gestion des risques connaît une véritable révolution culturelle. Jusqu'alors fonction technique, centrée autour de l'achat de couverture d'assurances, elle est devenue une discipline managériale et transversale : une valise d'instruments que chaque manager doit connaître et appliquer quels que soient son domaine de compétence et ses missions au sein de l'organisation. En effet, la gestion des risques est une culture qui doit être assimilée par chacun des acteurs. C'est précisément l'ambition des 101 questions rassemblées dans cet ouvrage : apporter à chaque manager d'entreprise, de collectivité, d'établissement de santé..., des réponses claires au " pourquoi " et au " comment " : Comment identifier les risques ? Comment analyser les risques ? Quels sont les objectifs de la gestion des risques ? Une carte des risques pour quoi faire ? Pourquoi faut-il financer les risques ? Les entreprises ont-elles des responsabilités pénales ? En quoi consiste la gestion...

  11. La gouvernance des risques naturels et la problematique des ...

    African Journals Online (AJOL)

    Depuis quelques années, la gouvernance des risques naturels dus aux inondations remet en cause les processus de mise en oeuvre des politiques urbaines et la qualité de la structure des aménagements dans les grandes villes du Golfe de Guinée. La perception de la gouvernance et l'application des politiques de ...

  12. Greenhouse gas emissions and carbon sequestration by agroforestry systems in southeastern Brazil.

    Science.gov (United States)

    Torres, Carlos Moreira Miquelino Eleto; Jacovine, Laércio Antônio Gonçalves; Nolasco de Olivera Neto, Sílvio; Fraisse, Clyde William; Soares, Carlos Pedro Boechat; de Castro Neto, Fernando; Ferreira, Lino Roberto; Zanuncio, José Cola; Lemes, Pedro Guilherme

    2017-12-01

    Agrosilvopastoral and silvopastoral systems can increase carbon sequestration, offset greenhouse gas (GHG) emissions and reduce the carbon footprint generated by animal production. The objective of this study was to estimate GHG emissions, the tree and grass aboveground biomass production and carbon storage in different agrosilvopastoral and silvopastoral systems in southeastern Brazil. The number of trees required to offset these emissions were also estimated. The GHG emissions were calculated based on pre-farm (e.g. agrochemical production, storage, and transportation), and on-farm activities (e.g. fertilization and machinery operation). Aboveground tree grass biomass and carbon storage in all systems was estimated with allometric equations. GHG emissions from the agroforestry systems ranged from 2.81 to 7.98 t CO 2 e ha -1 . Carbon storage in the aboveground trees and grass biomass were 54.6, 11.4, 25.7 and 5.9 t C ha -1 , and 3.3, 3.6, 3.8 and 3.3 t C ha -1 for systems 1, 2, 3 and 4, respectively. The number of trees necessary to offset the emissions ranged from 17 to 44 trees ha -1 , which was lower than the total planted in the systems. Agroforestry systems sequester CO 2 from the atmosphere and can help the GHG emission-reduction policy of the Brazilian government.

  13. The beam-kicker system of the synchrotron Saturne. Magnetic field and particle orbit computations. Experimental results (1963); Le percuteur de faisceau de Saturne. Calcul du champ magnetique et des trajectoires. Verifications experimentales (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Gouttefangeas, M; Katz, A; Rastoix, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    In this report is briefly described the beam-kicker system of the synchrotron Saturne. An analysis of its operation based on the sampling method is given, as well as two methods for computing toe magnetic field produced by a set of endless conductors in the neighbourhood of a conducting shield where eddy currents are circulating. The first method leads to the resolution of a bi-dimensional Laplace equation with first kind boundary conditions (Dirichlet problem); the second one translates to electromagnetism the electrical images method currently used in electrostatics and yields the magnetic field as the sum of a triple series expansion in the general case of a set of conductors located in a parallelepipedal box. Finally are given the results obtained in computing on IBM 7090 the perturbation of the particle motion due to the beam-kicker. These results are compared with the experimental data. (authors) [French] Ce rapport decrit brievement le dispositif percuteur de faisceau mis en place sur le synchrotron Saturne. On y trouvera une analyse de se fonctionnement a partir de la theorie des echantillonnages. On indique egalment deux methodes de calcul du champ magnetique produit par un system de conducteurs indefinis en presence d'un blindage conducteur parcouru par des courants de Foucault: la premiere se ramene a la resolution d'une equation de Laplace a deux dimensions avec des conditions aux limites de premiere espece (probleme de Dirichlet), la seconde transpose en electromagnetisme la methode des images electriques classique en electrostatique et permet d'exprimer le champ magnetique sous la forme de la somme d'une serie triple dans le cas general d'un systeme de conducteurs contenus dans un blindage parallelepipedique. Pour terminer, on mentionne les resultats du calcul numerique de la perturbation de la trajectoire des particules sous l'effet du percuteur et on compare ces resultats aux resultats experimentaux. (auteurs)

  14. Sismonaute. Un système pour la détection et l'interprétation des fronts d'onde en simulation sismique Sismonaute. A System for Detecting and Interpreting Wave Fronts in Seismic Simulations

    Directory of Open Access Journals (Sweden)

    Junker U.

    2006-11-01

    Full Text Available Nous développons un système, dénommé SISMONAUTE, d'aide aux géophysiciens pour l'étude de la propagation des ondes dans un modèle postulé de sous-sol. Le système suit les fronts d'onde dans une série d'instantanés 2D produits par un simulateur numérique. De plus, il rétablit l'historique de l'onde, c'est-à-dire la séquence des réflexions, transmissions et diffractions qui représente des transformations qualitatives de l'onde. Cet historique est essentiel pour la comparaison des sismogrammes simulés et observés. Nous utilisons pour interpréter les données de simulation un système dirigé par les connaissances qui applique le raisonnement causal pour prédire, à chaque stade, de nouveaux fronts d'onde. Ces fronts prédits permettent une détection guidée des fronts d'onde sur les instantanés. We are developing a system, called SISMONAUTE, that supports a geophysicist in studying the propagation of waves in a postulated model of the subsoil. The system tracks the wave fronts in a sequence of 2D-snapshots produced by a numerical simulator. Furthermore, it recovers the history of a wave, i. e. the sequence of reflections, transmissions, and diffractions which represents qualitative changes of the wave. This history is essential for comparing simulated and observed seismograms. We use a knowledge-driven approach to interpret the simulated data. Using causal reasoning, the system predicts new wave fronts in each step. These predicted fronts enable a guided detection of wave fronts in the snapshots.

  15. Simulation of a dynamical ecotourism system with low carbon activity: A case from western China.

    Science.gov (United States)

    He, Yuan; Huang, Ping; Xu, Hong

    2018-01-15

    Currently, sustainable tourism is becoming more and more important in developing ecological economies. To achieve low-carbon development, some industries, such as logistics and municipal solid waste, have already taken action, but tourism has not attached sufficient importance to this issue. This paper designs an ecotourism system including tourism, carbon waste (solid waste and sewage), and ecology (water supply and green areas) to simulate low-carbon ecotourism through a quantitative approach. This paper explores the tourism system as well as some interactive factors and studies their quantitative relationship based on historical data. A feedback-loop dynamical system model is designed to simulate tourism, waste carbon, and ecology simultaneously. Finally, a case study applying the feedback-loop dynamical system model to Leshan City, a typical travel destination with colorful natural resources in western China, is conducted to indicate the development of ecotourism in an environmentally friendly economy, which verifies the positive effects of the model. Results show a coordinating upward tendency of tourism, solid waste carbon, and ecology from the dynamical model. When tourism increases, solid waste accumulation increases; however, the amount of sewage dumped directly into nature decreases sharply. After analysis of investment policy scenarios, the research indicates that more funds for sewage treatment will attract more tourists. To maintain the equilibrium of carbon waste, more funds shall be invested in solid waste treatment in the long term. Some discussions about local policy are included. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Carbon dioxide and methane emissions from the Yukon River system

    Science.gov (United States)

    Striegl, Robert G.; Dornblaser, Mark M.; McDonald, Cory P.; Rover, Jennifer R.; Stets, Edward G.

    2012-01-01

    Carbon dioxide (CO2) and methane (CH4) emissions are important, but poorly quantified, components of riverine carbon (C) budgets. This is largely because the data needed for gas flux calculations are sparse and are spatially and temporally variable. Additionally, the importance of C gas emissions relative to lateral C exports is not well known because gaseous and aqueous fluxes are not commonly measured on the same rivers. We couple measurements of aqueous CO2 and CH4 partial pressures (pCO2, pCH4) and flux across the water-air interface with gas transfer models to calculate subbasin distributions of gas flux density. We then combine those flux densities with remote and direct observations of stream and river water surface area and ice duration, to calculate C gas emissions from flowing waters throughout the Yukon River basin. CO2emissions were 7.68 Tg C yr−1 (95% CI: 5.84 −10.46), averaging 750 g C m−2 yr−1 normalized to water surface area, and 9.0 g C m−2 yr−1 normalized to river basin area. River CH4 emissions totaled 55 Gg C yr−1 or 0.7% of the total mass of C emitted as CO2 plus CH4 and ∼6.4% of their combined radiative forcing. When combined with lateral inorganic plus organic C exports to below head of tide, C gas emissions comprised 50% of total C exported by the Yukon River and its tributaries. River CO2 and CH4 derive from multiple sources, including groundwater, surface water runoff, carbonate equilibrium reactions, and benthic and water column microbial processing of organic C. The exact role of each of these processes is not yet quantified in the overall river C budget.

  17. A Power System Optimal Dispatch Strategy Considering the Flow of Carbon Emissions and Large Consumers

    Directory of Open Access Journals (Sweden)

    Jun Yang

    2015-08-01

    Full Text Available The carbon emissions trading market and direct power purchases by large consumers are two promising directions of power system development. To trace the carbon emission flow in the power grid, the theory of carbon emission flow is improved by allocating power loss to the load side. Based on the improved carbon emission flow theory, an optimal dispatch model is proposed to optimize the cost of both large consumers and the power grid, which will benefit from the carbon emissions trading market. Moreover, to better simulate reality, the direct purchase of power by large consumers is also considered in this paper. The OPF (optimal power flow method is applied to solve the problem. To evaluate our proposed optimal dispatch strategy, an IEEE 30-bus system is used to test the performance. The effects of the price of carbon emissions and the price of electricity from normal generators and low-carbon generators with regards to the optimal dispatch are analyzed. The simulation results indicate that the proposed strategy can significantly reduce both the operation cost of the power grid and the power utilization cost of large consumers.

  18. Decontamination System Development of Radioative Activated Carbon using Micro-bubbles

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Jong seon; Kim, Wi soo [NESS, Daejeon (Korea, Republic of); Han, Byoung sub. [Enesys Co., Daejeon (Korea, Republic of)

    2016-10-15

    This study was aimed to develop a decontamination system by applying such technical characteristics that minimizes a generation of secondary wastes while decontaminating radiation wastes. The radioactive activated carbon is removed from the end-of-life air cleaning filter in replacement or decommission of nuclear power plant or nuclear facility. By removing radioactive activated carbon, the filter would be classified as a low radioactive contaminant. And thus the amount of radioactive wastes and the treatment cost would be decreased. We are in development of the activated carbon cleaning technique by utilizing micro-bubbles, which improve efficiency and minimize damage of activated carbon. The purpose of using micro-bubbles is to decontamination carbon micropore, which is difficult to access, by principle of cavitation phenomenon generated in collapse of micro-bubbles. In this study, we introduced the micro-bubble decontamination system developed to decontaminate activated carbon. For further researches, we will determine carbon weight change and the decontamination rate under the experimental conditions such as temperature and pH.

  19. Decontamination System Development of Radioative Activated Carbon using Micro-bubbles

    International Nuclear Information System (INIS)

    Jeon, Jong seon; Kim, Wi soo; Han, Byoung sub.

    2016-01-01

    This study was aimed to develop a decontamination system by applying such technical characteristics that minimizes a generation of secondary wastes while decontaminating radiation wastes. The radioactive activated carbon is removed from the end-of-life air cleaning filter in replacement or decommission of nuclear power plant or nuclear facility. By removing radioactive activated carbon, the filter would be classified as a low radioactive contaminant. And thus the amount of radioactive wastes and the treatment cost would be decreased. We are in development of the activated carbon cleaning technique by utilizing micro-bubbles, which improve efficiency and minimize damage of activated carbon. The purpose of using micro-bubbles is to decontamination carbon micropore, which is difficult to access, by principle of cavitation phenomenon generated in collapse of micro-bubbles. In this study, we introduced the micro-bubble decontamination system developed to decontaminate activated carbon. For further researches, we will determine carbon weight change and the decontamination rate under the experimental conditions such as temperature and pH

  20. Effect of TOC [total organic carbon] on a PWR secondary cooling water system

    International Nuclear Information System (INIS)

    Gau, J.Y.; Oung, J.C.; Wang, T.Y.

    1989-01-01

    Increasing the amount of total organic carbon (TOC) during the wet layup of the steam generator was a problem in PWR nuclear power plant in Taiwan. The results of surveys of TOC in PWR secondary cooling water systems had shown that the impurity of hydrazine and the bacteria were the main reasons that increase TOC. These do not have a corrosion effect on Inconel 600 and carbon steel when the secondary cooling water containing the TOC is below 200 ppb. But the anaerobic bacteria from the steam generator in wet layup will increase corrosion rate of carbon steel and crevice corrosion of Inconel 600. (author)

  1. Solid polymer electrolyte on the basis of polyethylene carbonate-lithium perchlorate system

    International Nuclear Information System (INIS)

    Dukhanin, G.P.; Dumler, S.A.; Sablin, A.N.; Novakov, I.A.

    2009-01-01

    Reaction in the system polyethylene carbonate-lithium perchlorate was investigated by IR spectroscopy, differential thermal and X-ray structural analyses. Specific electric conductivity of the prepared composition has been measured. Solid polymer electrolytes on the basis of polyethylene carbonate have conducting properties as electrolytes on the basis of unmodified polyethylene oxide. Compositions of polyethylene carbonate : LiClO 4 =10 : 1Al 2 O 3 -ZrO 2 possess maximum value of electrical conductivity. Activation energies of the process is calculated for all investigated compositions, and dependence of these values from concentration of lithium perchlorate is established

  2. Phase equilibrium of binary system carbon dioxide - methanol at high pressure using artificial neural network

    International Nuclear Information System (INIS)

    Nasri, F.; Hatami, T.

    2012-01-01

    Interest in supercritical fluids extraction (SFE ) is increasing throughout many scientific and industrial fields. The common solvent for use in SFE is carbon dioxide. However, pure carbon dioxide frequently fails to efficiently extract the essential oil from a sample matrix, and modifier fluids such as methanol should be used to enhance extraction yield. A more efficient use of SFE requires quantitative prediction of phase equilibrium of this binary system, carbon dioxide - methanol. The purpose of the current research is modeling carbon dioxide - methanol system using artificial neural network (ANN). Results of ANN modeling has been compared with experimental data as well as thermodynamic equations of state. The comparison shows that the ANN modeling has a higher accuracy than thermodynamic models. (author)

  3. Feedback mechanisms in the climate system affecting future levels of carbon dioxide

    International Nuclear Information System (INIS)

    Kellogg, W.W.

    1983-01-01

    The rate of increase of concentration of atmospheric carbon dioxide depends on the consumption of fossil fuels (the major source of 'new' carbon dioxide) and the natural sinks for this trace constituent, primarily the oceans and the biosphere. (It is now fairly well established that the biosphere cannot be a major source, as has been claimed.) The rate of operation of these sinks depends on several factors determined by the state of the climate system, and they will therefore presumably change as the greenhouse effect of increasing carbon dioxide warms the earth. Five specific feedback loops are discussed, two of which are positive (amplifying the rate of increase), two are weakly negative (damping the rate of increase), and one is indeterminate but probably positive. It is concluded that it would be well to be prepared for the possibility that carbon dioxide may increase faster than predicted by models based on the current or past state of the climate system

  4. Carbon Dioxide Control System for a Mars Space Suit Life Support System

    Science.gov (United States)

    Alptekin, Gokhan; Jayaraman, Ambalavanan; Copeland, Robert; Parker, Amanda; Paul, Heather L.

    2011-01-01

    Carbon dioxide (CO2) control during Extravehicular Activities (EVAs) on Mars will be challenging. Lithium hydroxide (LiOH) canisters have impractical logistics penalties, and regenerable metal oxide (MetOx) canisters weigh too much. Cycling bed systems and permeable membranes that are regenerable in space vacuum cannot vent on Mars due to the high partial pressure of CO2 in the atmosphere. Although sweep gas regeneration is under investigation, the feasibility, logistics penalties, and failure modes associated with this technique have not been fully determined. TDA Research, Inc. is developing a durable, high-capacity regenerable adsorbent that can remove CO2 from the space suit ventilation loop. The system design allows sorbent regeneration at or above 6 torr, eliminating the potential for Martian atmosphere to leak into the regeneration bed and into the ventilation loop. Regeneration during EVA minimizes the amount of consumables to be brought from Earth and makes the mission more affordable, while providing great operational flexibility during EVA. The feasibility of the concept has been demonstrated in a series of bench-scale experiments and a preliminary system analysis. This paper presents the latest results from these sorbent and system development efforts.

  5. Investigation of the impacts of elevated atmospheric CO{sub 2}-concentrations during the Free-Air Carbon Dioxide Enrichment-Experiment. Development of universal solutions; Untersuchung der Auswirkungen erhoehter atmosphaerischer CO{sub 2}-Konzentrationen innerhalb des Free-Air Carbon Dioxide Enrichment-Experimentes. Ableitung allgemeiner Modelloesungen

    Energy Technology Data Exchange (ETDEWEB)

    Kartschall, T.; Michaelis, P. [Potsdam-Institut fuer Klimafolgenforschung e.V., Potsdam (Germany). Abt. Globaler Wandel und Natuerliche Systeme; Graefe, J.; Waloszczyk, K. [Professor-Hellriegel-Institut e.V., Bernburg (Germany); Grossman-Clarke, S.

    1999-06-01

    An improved version of the wheat model demeter including modules for important and commonly usable ecosystem compartments (i) light interception in homogenous and rowed canopies (ii) energy and gas exchange including photosynthesis (iii) water, temperature, carbon and nitrogen dynamics in mineral soils was developed. Due to the generic properties of the detailed model solutions qualitative and quantitative explanations about direct and indirect impacts of elevated atmospheric CO{sub 2} concentrations on Graminaceae (C{sub 3}-Type) under limited water and nitrogen supply are possible. These solutions have been tested under a wide range of geographic (33 bis 52 N), soil and climatic conditions. The model was validated on a wide spectrum of temporal (time steps ranging from one minute up to one day, simulation periods ranging from several hours to several years) and spatial scales (Submodel photosynthesis of leaf level, the entire model on canopy level, regional yield studies for the entire State of Brandenburg). (orig.) [German] Es wurde eine verbesserte Version des Modells demeter mit modularem Aufbau fuer wichtige und allgemein anwendbare Oekosystemteile (i) Lichtverteilung in homogenen geschlossenen bzw. gereihten Bestaenden; (ii) Energie- und Gasaustausch einschliesslich Photosynthese; (iii) Dynamik von Wasser, Temperatur, Kohlenstoff- und Stickstoffumsatz in Mineralboeden; entwickelt. Durch den generischen Charakter der detaillierten Modelloesungen sind qualitative und quantitative Aussagen zu direkten und indirekten Auswirkungen erhoehter atmosphaerischer CO{sub 2}-Konzentrationen auf Graminaceae des C{sub 3}-Typs bei Wasser- und Stickstofflimitierung unter breiteren geographischen (33 bis 52 N), Boden- und klimatischen Bedingungen moeglich. Das Modell wurde auf einem breiten Spektrum zeitlicher (Taktzeiten von einer Minute bis zu einem Tag, Simulationszeiten von mehreren Stunden bis zu mehreren Jahren) und raeumlicher Skalen (Teilmodell Photosynthese auf

  6. Smallholder tree farming systems for livelihood enhancement and carbon storage

    DEFF Research Database (Denmark)

    Roshetko, James Michael

    Smallholder agroforestry (tree farming) systems are prominent components of ‘trees outside the forest’. The hypothesis of this thesis is that smallholder tree-farming systems are viable agricultural and natural resources management systems that contribute significantly to global environmental goals...... and local economic objectives. The thesis supports the hypothesis by reviewing global and Asian trends of deforestation, human population growth, and demand for forest and tree products. The potential of smallholders’ treebased systems to expand regional forest resources, produce forest products...... development of smallholder systems, how genetic diversity of smallholder systems supports adaptation to climate change, and the capacity of smallholder systems to simultaneously produce marketable timber and agricultural crops....

  7. Membrane Systems Engineering for Post-combustion Carbon Capture

    KAUST Repository

    Alshehri, Ali; Khalilpour, Rajab; Abbas, Ali; Lai, Zhiping

    2013-01-01

    This study proposes a strategy for optimal design of hollow fiber membrane networks for post combustion carbon capture from power plant multicomponent flue gas. A mathematical model describing multicomponent gas permeation through a separation membrane was customized into the flowsheet modeling package ASPEN PLUS. An N-stage membrane network superstructure was defined considering all possible flowsheeting configurations. An optimization formulation was then developed and solved using an objective function that minimizes the costs associated with operating and capital expenses. For a case study of flue gas feed flow rate of 298 m3/s with 13% CO2 and under defined economic parameters, the optimization resulted in the synthesis of a membrane network structure consisting of two stages in series. This optimal design was found while also considering feed and permeate pressures as well as recycle ratios between stages. The cost of carbon capture for this optimal membrane network is estimated to be $28 per tonne of CO2 captured, considering a membrane permeance of 1000 GPU and membrane selectivity of 50. Following this approach, a reduction in capture cost to less than $20 per tonne CO2 captured is possible if membranes with permeance of 2000 GPU and selectivity higher than 70 materialize.

  8. Self-Monitoring Strengthening System Based on Carbon Fiber Laminate

    Directory of Open Access Journals (Sweden)

    Rafal Krzywon

    2016-01-01

    Full Text Available Externally bonded composites reinforced with high-strength fibers are increasingly popular in construction, especially in structures’ strengthening, where the best possible mechanical properties are required. At the same time the ability to autodetect threats is one of the most desirable features of contemporary structures. The authors of the paper have developed an intelligent fabric, wherein the carbon fibers play the role of not only tensile reinforcement but also strain sensor. The idea is based on the construction of the strain gauge, where the thread of carbon fibers arranged in zig-zag pattern works as electrical conductor and is insulated by parallel thread of glass or acrylic fibers. Preliminary laboratory tests were designed to create effective measurement techniques and assess the effectiveness of the strengthening of selected building structures, as reinforced concrete and timber beams. Presented in the paper, selected results of these studies are very promising, although there were some noted problems to be considered in next steps. The main problem here is the control of the cross section of the fibers tow, affecting the total resistance of the fabric. One of the main deficiencies of the proposed solution is also sensitivity to moisture.

  9. Multi-scale modeling of carbon capture systems

    Energy Technology Data Exchange (ETDEWEB)

    Kress, Joel David [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-03

    The development and scale up of cost effective carbon capture processes is of paramount importance to enable the widespread deployment of these technologies to significantly reduce greenhouse gas emissions. The U.S. Department of Energy initiated the Carbon Capture Simulation Initiative (CCSI) in 2011 with the goal of developing a computational toolset that would enable industry to more effectively identify, design, scale up, operate, and optimize promising concepts. The first half of the presentation will introduce the CCSI Toolset consisting of basic data submodels, steady-state and dynamic process models, process optimization and uncertainty quantification tools, an advanced dynamic process control framework, and high-resolution filtered computationalfluid- dynamics (CFD) submodels. The second half of the presentation will describe a high-fidelity model of a mesoporous silica supported, polyethylenimine (PEI)-impregnated solid sorbent for CO2 capture. The sorbent model includes a detailed treatment of transport and amine-CO2- H2O interactions based on quantum chemistry calculations. Using a Bayesian approach for uncertainty quantification, we calibrate the sorbent model to Thermogravimetric (TGA) data.

  10. Membrane Systems Engineering for Post-combustion Carbon Capture

    KAUST Repository

    Alshehri, Ali

    2013-08-05

    This study proposes a strategy for optimal design of hollow fiber membrane networks for post combustion carbon capture from power plant multicomponent flue gas. A mathematical model describing multicomponent gas permeation through a separation membrane was customized into the flowsheet modeling package ASPEN PLUS. An N-stage membrane network superstructure was defined considering all possible flowsheeting configurations. An optimization formulation was then developed and solved using an objective function that minimizes the costs associated with operating and capital expenses. For a case study of flue gas feed flow rate of 298 m3/s with 13% CO2 and under defined economic parameters, the optimization resulted in the synthesis of a membrane network structure consisting of two stages in series. This optimal design was found while also considering feed and permeate pressures as well as recycle ratios between stages. The cost of carbon capture for this optimal membrane network is estimated to be $28 per tonne of CO2 captured, considering a membrane permeance of 1000 GPU and membrane selectivity of 50. Following this approach, a reduction in capture cost to less than $20 per tonne CO2 captured is possible if membranes with permeance of 2000 GPU and selectivity higher than 70 materialize.

  11. Synthesis of Heteroaromatic Compounds by Oxidative Aromatization Using an Activated Carbon/Molecular Oxygen System

    Directory of Open Access Journals (Sweden)

    Masahiko Hayashi

    2009-08-01

    Full Text Available A variety of heteroaromatic compounds, such as substituted pyridines, pyrazoles, indoles, 2-substituted imidazoles, 2-substituted imidazoles, 2-arylbenzazoles and pyrimidin-2(1H-ones are synthesized by oxidative aromatization using the activated carbon and molecular oxygen system. Mechanistic study focused on the role of activated carbon in the synthesis of 2-arylbenzazoles is also discussed. In the final section, we will disclose the efficient synthesis of substituted 9,10-anthracenes via oxidative aromatization.

  12. Development of Carbon Dioxide Removal Systems for Advanced Exploration Systems 2014-2015

    Science.gov (United States)

    Knox, James C.; Coker, Robert; Huff, Timothy L.; Gatens, Robyn; Miller, Lee A.; Stanley, Christine

    2015-01-01

    A long-term goal for NASA is to enable crewed missions to Mars: first to the vicinity of Mars, and then to the Mars surface. These missions present new challenges for all aspects of spacecraft design in comparison with the International Space Station, as resupply is unavailable in the transit phase, and early return is not possible. Additionally, mass, power, and volume must be minimized for all phases to reduce propulsion needs. Mass reduction is particularly crucial for Mars surface landing and liftoff due to the challenges inherent in these operations for even much smaller payloads. In this paper we describe current and planned developments in the area of carbon dioxide removal to support future crewed Mars missions. Activities are also described that apply to both the resolution of anomalies observed in the ISS CDRA and the design of life support systems for future missions.

  13. Development of Carbon Dioxide Removal Systems for Advanced Exploration Systems 2015-2016

    Science.gov (United States)

    Knox, James; Coker, Robert; Huff, Tim; Miller, Lee

    2016-01-01

    A long-term goal for NASA is to enable crewed missions to Mars: first to the vicinity of Mars, and then to the Mars surface. These missions present new challenges for all aspects of spacecraft design in comparison with the International Space Station, as resupply is unavailable in the transit phase, and early return is not possible. Additionally, mass, power, and volume must be minimized for all phases to reduce propulsion needs. Mass reduction is particularly crucial for Mars surface landing and liftoff due to the challenges inherent in these operations for even much smaller payloads. In this paper we describe current and planned developments in the area of carbon dioxide removal to support future crewed Mars missions. Activities are also described that apply to both the resolution of anomalies observed in the ISS CDRA and the design of life support systems for future missions.

  14. Direct Carbon Fuel Cell System Utilizing Solid Carbonaceous Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Turgut Gur

    2010-04-30

    This 1-year project has achieved most of its objective and successfully demonstrated the viability of the fluidized bed direct carbon fuel cell (FB-DCFC) approach under development by Direct Carbon technologies, LLC, that utilizes solid carbonaceous fuels for power generation. This unique electrochemical technology offers high conversion efficiencies, produces proportionately less CO{sub 2} in capture-ready form, and does not consume or require water for gasification. FB-DCFC employs a specialized solid oxide fuel cell (SOFC) arrangement coupled to a Boudouard gasifier where the solid fuel particles are fluidized and reacted by the anode recycle gas CO{sub 2}. The resulting CO is electrochemically oxidized at the anode. Anode supported SOFC structures employed a porous Ni cermet anode layer, a dense yttria stabilized zirconia membrane, and a mixed conducting porous perovskite cathode film. Several kinds of untreated solid fuels (carbon and coal) were tested in bench scale FBDCFC prototypes for electrochemical performance and stability testing. Single cells of tubular geometry with active areas up to 24 cm{sup 2} were fabricated. The cells achieved high power densities up to 450 mW/cm{sup 2} at 850 C using a low sulfur Alaska coal char. This represents the highest power density reported in the open literature for coal based DCFC. Similarly, power densities up to 175 mW/cm{sup 2} at 850 C were demonstrated with carbon. Electrical conversion efficiencies for coal char were experimentally determined to be 48%. Long-term stability of cell performance was measured under galvanostatic conditions for 375 hours in CO with no degradation whatsoever, indicating that carbon deposition (or coking) does not pose any problems. Similar cell stability results were obtained in coal char tested for 24 hours under galvanostatic conditions with no sign of sulfur poisoning. Moreover, a 50-cell planar stack targeted for 1 kW output was fabricated and tested in 95% CO (balance CO{sub 2

  15. La territorialisation des politiques environnementales

    Directory of Open Access Journals (Sweden)

    Amédée Mollard

    2010-10-01

    Full Text Available Le point de départ de cet article est la grande variabilité de la pollution nitrique diffuse de l’eau due à l’agriculture. Celle-ci dépend en particulier du climat, des types de sol et des systèmes de production agricole. Nos recherches réalisées de façon interdisciplinaire à partir de deux sites différents en France, montrent que cette hétérogénéité spatio-temporelle conditionne les pratiques agricoles mises en œuvre pour réduire la pollution au niveau de la norme admise. De ce fait, les pratiques les plus « coût-efficaces » diffèrent d’un territoire à l’autre, en fonction des caractéristiques locales. Ces résultats mettent donc en évidence une efficacité potentielle d’une territorialisation des politiques publiques. En théorie, de telles politiques sont considérées comme optimales par les économistes, car elles incitent les agents à moduler leurs efforts en fonction de la sensibilité du milieu. Mais, selon les études empiriques, cet avantage serait annulé par un coût élevé de mise en œuvre, de contrôle et de surveillance. Pour maintenir leur avantage sur des politiques uniformes, les politiques territorialisées devraient être mises en œuvre à un niveau spatial optimal. Un tel niveau devrait au minimum atteindre un compromis entre l’économie réalisée grâce à une modulation adaptée aux conditions locales et les sur-coûts dus à la décentralisation des solutions mises en œuvre. Cet article analyse la pertinence d’une prise en compte de ces spécificités par des politiques territorialisées. L’efficacité d’une régulation différenciée de la pollution nitrique est étudiée ici en évaluant l’importance de la variabilité spatiale des paramètres physiques et des coûts de la territorialisation.The paper starts with the wide variability of nonpoint water nitrogenous pollution generated by agriculture. This variability depends especially on climate, soil types and farming

  16. Microfractographic analysis of delamination growth in fatigue loaded - carbon fibre/thermosetting matrix composites; Mikrofraktographische Analyse des Delaminationswachstums in zyklisch belasteten Kohlenstoffaser/Duroplastharz-Verbundwerkstoffen

    Energy Technology Data Exchange (ETDEWEB)

    Heutling, F.; Franz, H.E. [Daimler-Benz AG, Muenchen (Germany); Friedrich, K. [Kaiserslautern Univ. (Germany). Inst. for Composite Materials Ltd.

    1998-05-01

    Carbon-fibre-reinforced plastics (CFRP) are known to be considerably less sensitive to fatigue loading than aluminium (Al) alloys, for instance. However, even in the presence of small delaminations, the damage tolerance of structural components may be considerably reduced. The scope of the present contribution is to investigate fatigue phenomena in CFRP materials (with thermosetting matrix) by means of microfractography. The microfractographic features of the fracture surfaces mirror the processes of deformation and fracture at the delamination front. The fatigue fracture behaviour of a CFRP laminate subjected to cyclic mixed-mode loading is determined by matrix-controlled failure mechanisms. Under pure mode-II loading conditions, rollers in addition to fatigue striations appear in the fibre imprints whose formation mechanism was explained by means of high-resolution field-emission scanning electron microscopy (FE-SEM). The ratio between the local tensile and shear stress components influences the propagation direction of secondary cracks originating at the fibres. The local fracture propagations in these secondary cracks can be recognised through the fatigue striations appearing on the surface of the matrix. A comparison with static mixed-mode loading reveals that in both cases the crack propagation follows the path of the local maximum main stress. Applying mathematical relationships derived from the theory of elasticity permitted developing a mixed-mode loading model which makes it possible to predict the crack processes and hence to explain the formation of typical fracture-morphological features. (orig.) 26 refs.

  17. Research developments in methods to reduce the carbon footprint of the food system: a review.

    Science.gov (United States)

    Xu, Zhongyue; Sun, Da-Wen; Zeng, Xin-An; Liu, Dan; Pu, Hongbin

    2015-01-01

    Global warming is a worldwide issue with its evident impact across a wide range of systems and sectors. It is caused by a number of greenhouse gases (GHGs) emissions, in which food system has made up of a large part. Recently, reduction of GHG emissions has become an urgent issue to be resolved in the food system. Many governments and organizations are making great endeavors to alleviate the adverse effect of this phenomenon. In this review, methods to reduce the carbon footprint within the life cycle of a food system are presented from the technical, consumption behavior and environmental policies perspectives. The whole food system including raw material acquisition, processing, packaging, preservation, transportation, consumption, and disposal are covered. Improving management techniques, and adopting advanced technology and equipment are critical for every stage of a food system. Rational site selection is important to alleviate the influence of land use change. In addition, environmental choices of packaging stage, reduction in refrigeration dependence, and correct waste treatment are essential to reduce the total carbon footprint of the production. However, only technical methods cannot radically reverse the trend of climate change, as consumption behaviors present a great deal of influence over climate change. Appropriate purchase patterns and substitution within food product categories by low carbon products can reduce GHG emissions. Development of methods to calculate the carbon footprint of every kind of food and its processing technology enable people to make environmental choice. Policy can shape and cultivate the new code of consumption and influence the direction of emerging technology and science. From political perspectives, government intervention and carbon offset are common tools, especially for carbon tax and a real or implicit price of carbon. Finally, by mitigating the methodologies described above, the rate and magnitude of climate changes

  18. Carbon nanotube as a carrier in drug delivery system for carnosine dipeptide: A computer simulation study

    Energy Technology Data Exchange (ETDEWEB)

    Ketabi, Sepideh, E-mail: sepidehketabi@yahoo.com [Department of Chemistry, East Tehran Branch, Islamic Azad University, Tehran (Iran, Islamic Republic of); Rahmani, Leila [Department of Biochemistry, Falavarjan Branch, Islamic Azad University, Falavarjan (Iran, Islamic Republic of)

    2017-04-01

    Biological application of carbon nanotube in drug delivery is our main concern in this investigation. For this purpose interaction of carnosine and carbon nanotube was studied in both gas phase and separately in aqueous media. Three possible interactions of carnosine dipeptide with (5,5) carbon nanotube in physiological media were considered. At first step each species were modeled using quantum mechanical calculations, in the next step, their properties in aqueous solution were studied by applying Monte Carlo simulations. The results of density functional calculations in gas phase showed that interaction of zwitterion of carnosine with carbon nanotube via NH{sub 3}{sup +} had relatively higher interaction energy than the other complexes. Computation of solvation free energies in water showed functionalization with carnosine enhanced the solubility of carbon nanotube significantly that improve the medicinal applications of these materials. Calculation of complexation free energies indicated that zwitterion of carnosine with carbon nanotube via NH{sub 3}{sup +} produced the most stable complex in aqueous solution. This tendency could be observed in gas and liquid phase similarly. - Highlights: • Carnosine dipeptide (an anti-ageing compound and neuron protection in relation to Alzheimer's dementia) can be stabilized against degradation by binding to Carbon nanotube as a transporter. • Functionalization with carnosine increases the solubility of carbon nanotube considerably and so such systems hold great potential in the field of nanomedicine. • Complexation free energies confirm the interaction of carnosine dipeptide with carbon nanotube in aqueous solution. • Carnosine zwitter ion via NH{sub 3}{sup +} have the most interaction energy with carbon nanotube.

  19. Study of ageing mechanisms of organic electrolyte super-capacitors based on activated carbons; Recherche des causes du vieillissement de supercondensateurs a electrolyte organique a base de carbones actives

    Energy Technology Data Exchange (ETDEWEB)

    Azais, Ph

    2003-11-15

    The energy which is stored in electrochemical capacitors is proportional to the square of voltage. Consequently, the most attractive super-capacitors are those which operate in organic electrolyte medium, with an electrolyte potential window which theoretically can easily reach more than 3 V. However, even using lower values of voltage, there is a remarkable fading of the electrochemical characteristics with operating time, that is mainly characterized by capacitance loss and resistance increase. On a commercial point of view, these capacitors must be improved in order to reach the expected criterion of long operating life. In the presented work, we will determine some reasons of super-capacitors ageing in organic electrolyte (1 M solution of Et{sub 4}N{sup +} BF{sub 4}{sup -} in acetonitrile) and we will propose a treatment of activated carbon which noticeably improves the performance. A prolonged charging of electrochemical capacitors at 2.5 V, so called floating, results in gases formation and to a noticeable mass uptake of the electrodes. XPS and NMR analysis performed on carefully washed electrodes demonstrated the existence of decomposition products from the electrolyte, which are trapped in the pores of the activated carbon. These products block the pores, limiting the ions access to the active surface that causes the decay of electrochemical performances. Electrolyte decomposition is especially very high when the electrodes are constituted of carbons with a rich surface functionality, i.e. surface oxygenated groups and free radicals. Therefore, activated carbons have been submitted to thermal treatment, both in nitrogen and hydrogen atmosphere, allowing the oxygenated surface functionality to be noticeably depressed. Super-capacitors built with the treated materials have been submitted to floating during more than 2000 hours. Extremely good electrochemical performance are preserved with the electrodes obtained from activated carbons treated under hydrogen

  20. Development of a Carbon Management Geographic Information System (GIS) for the United States

    Energy Technology Data Exchange (ETDEWEB)

    Howard Herzog; Holly Javedan

    2009-12-31

    In this project a Carbon Management Geographical Information System (GIS) for the US was developed. The GIS stored, integrated, and manipulated information relating to the components of carbon management systems. Additionally, the GIS was used to interpret and analyze the effect of developing these systems. This report documents the key deliverables from the project: (1) Carbon Management Geographical Information System (GIS) Documentation; (2) Stationary CO{sub 2} Source Database; (3) Regulatory Data for CCS in United States; (4) CO{sub 2} Capture Cost Estimation; (5) CO{sub 2} Storage Capacity Tools; (6) CO{sub 2} Injection Cost Modeling; (7) CO{sub 2} Pipeline Transport Cost Estimation; (8) CO{sub 2} Source-Sink Matching Algorithm; and (9) CO{sub 2} Pipeline Transport and Cost Model.

  1. Recycling of solid wastes in Mexico City in livestock and agricultural production systems as a sustainable alternative Le recyclage des déchets solides issus du bétail et des systèmes de production agricole comme solution alternative durable à la gestion des déchets dans la ville de Mexico Reciclaje de desechos sólidos para la producción agropecuaria en la Ciudad de México como alternativa sustentable

    Directory of Open Access Journals (Sweden)

    H. Losada

    2011-04-01

    Full Text Available The use of solid organic wastes (manure and  fruit and vegetable refusals as a way to recycle rubbish from peri-urban areas for the production of crops for local consumption, has been designated by some researchers as an alternate method to partially reduce city waste disposal problems as well as to generate employment and promote the consumption of local products. This model production has also been suggested as a closed system ideally suited for urban environments in order to reduce the use of external inputs and encourage waste recycling policies for resource usage. A system that uses a significant amount of solid waste in the form of fruits and vegetables and the local food industry to feed dairy cows has been implemented in the East of Mexico City. The stable refusal consisting of manure and straw are sent in a fresh way to agricultural areas of the South-East of the city and used as an important external input support for the production of nopal-verdura which constitutes an important food in the diet of the inhabitants of Mexico City. The main goal of this paper is to expose and analyze current and future advantages and problems in both systems as sustainable alternatives for waste management.L’utilisation de déchets organiques solides (fumier et déchets de fruits et légumes comme moyen de recyclage des ordures des zones périurbaines pour produire des récoltes destinées à la consommation locale, a été décrite par certains chercheurs comme une solution permettant de réduire partiellement les problèmes de gestion des déchets dans les villes, de générer de l’emploi et d’encourager la consommation de produits locaux. Ce modèle de production est également considéré comme un système fermé parfaitement adapté aux environnements urbains car il permet de réduire le recours à des ressources externes et d’encourager les politiques de recyclage des déchets pour l’utilisation des ressources. Un système qui utilise

  2. Development of Electro-Microbial Carbon Capture and Conversion Systems

    KAUST Repository

    Al Rowaihi, Israa S.

    2017-05-01

    Carbon dioxide is a viable resource, if used as a raw material for bioprocessing. It is abundant and can be collected as a byproduct from industrial processes. Globally, photosynthetic organisms utilize around 6’000 TW (terawatt) of solar energy to fix ca. 800 Gt (gigaton) of CO2 in the planets largest carbon-capture process. Photosynthesis combines light harvesting, charge separation, catalytic water splitting, generation of reduction equivalents (NADH), energy (ATP) production and CO2 fixation into one highly interconnected and regulated process. While this simplicity makes photosynthetic production of commodity interesting, yet photosynthesis suffers from low energy efficiency, which translates in an extensive footprint for solar biofuels production conditions that store < 2% of solar energy. Electron transfer processes form the core of photosynthesis. At moderate light intensity, the electron transport chains reach maximum transfer rates and only work when photons are at appropriate wavelengths, rendering the process susceptible to oxidative damage, which leads to photo-inhibition and loss of efficiency. Based on our fundamental analysis of the specialized tasks in photosynthesis, we aimed to optimize the efficiency of these processes separately, then combine them in an artificial photosynthesis (AP) process that surpasses the low efficiency of natural photosynthesis. Therefore, by combining photovoltaic light harvesting with electrolytic water splitting or CO2 reduction in combination with microbiological conversion of electrochemical products to higher valuable compounds, we developed an electro-microbial carbon capture and conversion setups that capture CO2 into the targeted bioplastic; polyhydroxybutyrate (PHB). Based on the type of the electrochemical products, and the microorganism that either (i) convert products formed by electrochemical reduction of CO2, e.g. formate (using inorganic cathodes), or (ii) use electrochemically produced H2 to reduce CO2

  3. Photonique des Morphos

    CERN Document Server

    Berthier, Serge

    2010-01-01

    La photonique est déjà présente dans notre vie quotidienne, et on attend maintenant que la manipulation des photons permette aussi le traitement logique des informations. Cependant, l’élément de base qui permet cette manipulation de la lumière, le cristal photonique, est d’une réalisation complexe et mal contrôlée. Dans la course à la maîtrise de la lumière, les structures photoniques naturelles ont beaucoup à nous apprendre. C’est ce que nous montre Serge Berthier qui étudie dans ce livre la structure des écailles des Morphos. Tenant compte de l’essor récent des approches biomimétiques, il présente de manière détaillée plus de dix-huit techniques expérimentales utilisées pour ses analyses, ainsi que les diverses approches théoriques développées pour la modélisation de structures multi-échelles complexes. Première étude quasi-exhaustive des structures fines d’un genre et des propriétés optiques ainsi que colorimétriques générées, ce livre fournit aux entomologiste...

  4. Droit des organisations internationales

    CERN Document Server

    Sorel, Jean-Marc; Ndior, Valère

    2013-01-01

    Cet ouvrage collectif offre aux enseignants et chercheurs en droit international, aux praticiens et aux étudiants, une analyse actualisée du droit des organisations internationales. Il dresse en cinq parties un tableau, illustré par des exemples variés, des problématiques que soulève le phénomène polymorphe d institutionnalisation de la société internationale. La première partie est consacrée au phénomène des « organisations internationales », sous l angle à la fois de l institutionnalisation progressive des relations internationales et de la difficulté à cerner une catégorie unifiée. La deuxième partie rend compte de la création, de la disparition et des mutations des organisations internationales, ici envisagées comme systèmes institutionnels et ordres juridiques dérivés. La troisième partie analyse l autonomie que l acquisition de la personnalité juridique et de privilèges et immunités, un organe administratif intégré, un personnel ou un budget propres confèrent aux organi...

  5. Sedimentology and geochemistry of carbonates diagenesis. Application to the Malm of the eastern edge of the Paris basin; Sedimentologie et geochimie de la diagenese des carbonates. Application au Malm de la Bordure Est du Bassin de Paris

    Energy Technology Data Exchange (ETDEWEB)

    Vincent, B

    2001-12-01

    The important heterogeneity of neritic carbonates reflects: 1 - the facies characteristics of the initial sediments, linked with the diversity of sedimentation environments, and 2 - the post-sedimentation diagenesis characteristics. The aim of this work is to explore this heterogeneity using the {delta}{sup 18}O isotopic signal. A three step pluri-disciplinary approach with different observation scales is established: 1 - a sedimentology study (facies inventory, paleo-environment variations, stratigraphic cycles), 2 - an inventory and chronology of the diagenesis phases and products which have modified he initial sediments, and 3 - a geochemical approach based on the {delta}{sup 18}O signal. This last step combines ionic microprobe measurements performed on separated phases and measurements performed on the whole rock carbonated phase. The carbonate formations under study correspond to the HTM102 borehole made by the ANDRA in the Malm of the eastern edge of the Paris basin. For the stratigraphic approach, some field analogues have been studied (Pagny-sur-Meuse and Gudmont-Villiers sections). (J.S.)

  6. Characteristics study of a system for carbon 14 dating

    International Nuclear Information System (INIS)

    Oikawa, H.

    1978-01-01

    The developing of a radiocarbon dating laboratory, specially built to deal with carbonate samples from underground water, at the Institute de Energia Atomica, required the optimization of a benzene synthetizer, and also of the operative conditions of the liquid scintillator counter, used in sample measurements. An average yield of about 70% was obtained in our benzenic synthesis. If more refined conditions were used, better results could have been obtained, but the reported yield is good enough for our necessities. A comparison of the ages of several shell samples was done between the Geochronology Laboratory, belonging to the Instituto de Geociencias, at Sao Paulo University and our dating laboratory. The agreement between the results was fairly good, according to the precision required [pt

  7. Tracing the sources of organic carbon in freshwater systems

    Science.gov (United States)

    Glendell, Miriam; Meersmans, Jeroen; Barclay, Rachel; Yvon-Durocher, Gabriel; Barker, Sam; Jones, Richard; Hartley, Iain; Dungait, Jennifer; Quine, Timothy

    2016-04-01

    Quantifying the lateral fluxes of carbon from land to inland waters is critical for the understanding of the global carbon cycle and climate change mitigation. However, the crucial role of rivers in receiving, transporting and processing the equivalent of terrestrial net primary production in their watersheds has only recently been recognised. In addition, the fluxes of carbon from land to ocean, and the impact of anthropogenic perturbation, are poorly quantified. Therefore, a mechanistic understanding of the processes involved in the loss and preservation of C along the terrestrial-aquatic continuum is required to predict the present and future contribution of aquatic C fluxes to the global C budget. This pilot study examines the effect of land use on the fate of organic matter within two headwater catchments in Cornwall (UK) in order to develop a methodological framework for investigating C-cycling across the entire terrestrial-aquatic continuum. To this end, we aim to characterise the spatial heterogeneity of soil erosion driven lateral fluxes of SOC to identify areas of erosion and deposition using 137Cs radio-isotope and trace the terrestrial versus aquatic origin of C along the river reaches and in lake sediments at the catchment outlet. The 3D spatial distribution of SOC has been investigated by sampling three depth increments (i.e. 0-15cm, 15-30cm and 30-50cm) along 14 hillslope transects within two sub-catchments of ˜km2 each. In total, 80 terrestrial sites were monitored and analysed for total C and N, and bulk stable 13C/15N isotope values, while 137Cs was used to obtain a detailed understanding of the spatial - temporal variability in erosion driven lateral fluxes of SOC within the catchments. The relative contribution of terrestrial and aquatic C was examined along the river reaches as well as in lake sediments at the catchment outlet by considering n-alkane signatures. By linking the C accumulation rates in lake sediments over decadal timescales from

  8. L'EVOLUTION DU DESIGN DES SYSTEMES DE PILOTAGE DE LA PERFORMANCE DANS LES HOPITAUX : UNE QUETE PERMANENTE DE L'EFFICIENCE ORGANISATIONNELLE

    OpenAIRE

    Rouhana , Rima; Van Caillie , Didier

    2008-01-01

    International audience; Notre communication vise (1) à dresser un historique de l'évolution du design des systèmes de contrôle de gestion (CDG) et, essentiellement, des systèmes de pilotage de la performance (SPP) en contexte hospitalier; (2) à en inférer, dans une perspective contingente, la nature de ses principaux facteurs contingents; et (3) à synthétiser l'ensemble dans un modèle contingent conceptuel permettant de comprendre comment le système de contrôle de gestion des institutions hos...

  9. Integrating forest inventory and analysis data into a LIDAR-based carbon monitoring system

    Science.gov (United States)

    Kristofer D. Johnson; Richard Birdsey; Andrew O Finley; Anu Swantaran; Ralph Dubayah; Craig Wayson; Rachel. Riemann

    2014-01-01

    Forest Inventory and Analysis (FIA) data may be a valuable component of a LIDAR-based carbon monitoring system, but integration of the two observation systems is not without challenges. To explore integration methods, two wall-to-wall LIDAR-derived biomass maps were compared to FIA data at both the plot and county levels in Anne Arundel and Howard Counties in Maryland...

  10. 77 FR 33859 - Carbon Dioxide Fire Suppression Systems on Commercial Vessels

    Science.gov (United States)

    2012-06-07

    ... alternatives suggested using plastic wrap to detect leaks rather than requiring odorizers. This suggestion is... approved alternatives to carbon dioxide systems may be used to protect some spaces on these vessels, and... regulations so that the clean agent systems we have routinely been approving can be used by regulated entities...

  11. Investigation on the immobilisation of carbon in OPC-BFS and OPC-PFA systems

    International Nuclear Information System (INIS)

    Kinoshita, H.; Borges, P. H. R.; Utton, C. A.; Milestone, N. B.; Lynsdale, C.

    2008-01-01

    The reaction of CO 2 gas with OPC, OPC-BFS and OPC-PFA composite cement systems were studied using XRD, SEM and TG to investigate the applicability of these materials to immobilise carbon arising from graphite waste. XRD results suggested that calcite formed in OPC system after the carbonation reaction, whereas calcite and vaterite were observed in OPC-BFS and OPC-PFA systems. In OPC system, nearly half of Ca(OH) 2 was consumed to form CaCO 3 . In OPC-BFS and OPC-PFA systems, the amount of CaCO 3 formed, corresponded to the consumption of greater than 100% of Ca(OH) 2 initially present, suggesting that other hydration products e.g. C-S-H were also consumed, either directly or indirectly during the carbonation process. The OPC-BFS system became more porous after carbonation. OPC-PFA system indicated a high efficiency on the conversion of Ca in the system into CaCO 3 . (authors)

  12. Cascade: a Knowledge-Based System Supporting Shoe Depths Selection and Casing Design CASCADE : un système à base de connaissances pour l'aide au choix de la profondeur des sabots et à la conception du tubage

    Directory of Open Access Journals (Sweden)

    Sansone A.

    2006-11-01

    meet all the requirements and minimize cost is not a trivial task. The choice of the expert systems technology exploited for the system development is related to the following topics :(a An expert system can combine several different skills. (b It guarantees easy and modular expanclibility with the acquisition of new experience. (c Moreover, new experience must be taken into account in order to continuously increase the quality of the results. (d Available data come from many sources, and all have to be considered when choosing the shoe depths' and casing's geometrical and mechanical characteristics. (e An expert system can explicitly represent both domain and strategical knowledge that can easily be modified, added or expunged. It can also give the user a feedback on its own behaviour, and it can also be used as a training tool. The benefits for the final user are:(a An efficient, integrated environment providing the tools the drilling engineer needs to work with. (b Greater accuracy. (c Access and assessment of knowledge and procedures regarding this matter. (d Interactive, user friendly interface. CASCADE est un système d'aide à la conception du tubage et au choix des sabots pour les puits d'exploration et de production. Ce système expert est une partie du projet ADIS (Advanced Drilling Information System, Système d'Information Avancé pour le Forage développé en commun par trois sociétés du groupe ENI : AGIP, ENIDATA et SAIPEM. Le but d'ADIS est de fournir des outils informatiques d'ingénierie de forage pour la planification et le suivi des opérations, utilisables aussi bien sur le site de forage que dans les bureaux. Ces outils devront également superviser les opérations en temps réel et émettre des diagnostics. Pour les tâches de suivi en temps réel, l'équipe de projet d'ADIS a mis au point des systèmes permettant la communication par satellite entre les appareils de forage et la base, ainsi que des systèmes experts de supervision pour l

  13. Development of a system emulating the global carbon cycle in Earth system models

    Science.gov (United States)

    Tachiiri, K.; Hargreaves, J. C.; Annan, J. D.; Oka, A.; Abe-Ouchi, A.; Kawamiya, M.

    2010-08-01

    Recent studies have indicated that the uncertainty in the global carbon cycle may have a significant impact on the climate. Since state of the art models are too computationally expensive for it to be possible to explore their parametric uncertainty in anything approaching a comprehensive fashion, we have developed a simplified system for investigating this problem. By combining the strong points of general circulation models (GCMs), which contain detailed and complex processes, and Earth system models of intermediate complexity (EMICs), which are quick and capable of large ensembles, we have developed a loosely coupled model (LCM) which can represent the outputs of a GCM-based Earth system model, using much smaller computational resources. We address the problem of relatively poor representation of precipitation within our EMIC, which prevents us from directly coupling it to a vegetation model, by coupling it to a precomputed transient simulation using a full GCM. The LCM consists of three components: an EMIC (MIROC-lite) which consists of a 2-D energy balance atmosphere coupled to a low resolution 3-D GCM ocean (COCO) including an ocean carbon cycle (an NPZD-type marine ecosystem model); a state of the art vegetation model (Sim-CYCLE); and a database of daily temperature, precipitation, and other necessary climatic fields to drive Sim-CYCLE from a precomputed transient simulation from a state of the art AOGCM. The transient warming of the climate system is calculated from MIROC-lite, with the global temperature anomaly used to select the most appropriate annual climatic field from the pre-computed AOGCM simulation which, in this case, is a 1% pa increasing CO2 concentration scenario. By adjusting the effective climate sensitivity (equivalent to the equilibrium climate sensitivity for an energy balance model) of MIROC-lite, the transient warming of the LCM could be adjusted to closely follow the low sensitivity (with an equilibrium climate sensitivity of 4.0 K

  14. Development of a system emulating the global carbon cycle in Earth system models

    Directory of Open Access Journals (Sweden)

    K. Tachiiri

    2010-08-01

    Full Text Available Recent studies have indicated that the uncertainty in the global carbon cycle may have a significant impact on the climate. Since state of the art models are too computationally expensive for it to be possible to explore their parametric uncertainty in anything approaching a comprehensive fashion, we have developed a simplified system for investigating this problem. By combining the strong points of general circulation models (GCMs, which contain detailed and complex processes, and Earth system models of intermediate complexity (EMICs, which are quick and capable of large ensembles, we have developed a loosely coupled model (LCM which can represent the outputs of a GCM-based Earth system model, using much smaller computational resources. We address the problem of relatively poor representation of precipitation within our EMIC, which prevents us from directly coupling it to a vegetation model, by coupling it to a precomputed transient simulation using a full GCM. The LCM consists of three components: an EMIC (MIROC-lite which consists of a 2-D energy balance atmosphere coupled to a low resolution 3-D GCM ocean (COCO including an ocean carbon cycle (an NPZD-type marine ecosystem model; a state of the art vegetation model (Sim-CYCLE; and a database of daily temperature, precipitation, and other necessary climatic fields to drive Sim-CYCLE from a precomputed transient simulation from a state of the art AOGCM. The transient warming of the climate system is calculated from MIROC-lite, with the global temperature anomaly used to select the most appropriate annual climatic field from the pre-computed AOGCM simulation which, in this case, is a 1% pa increasing CO2 concentration scenario.

    By adjusting the effective climate sensitivity (equivalent to the equilibrium climate sensitivity for an energy balance model of MIROC-lite, the transient warming of the LCM could be adjusted to closely follow the low sensitivity (with an equilibrium

  15. Carbon Dioxide Control System for a Mars Space Suit Life Support System

    Science.gov (United States)

    Alptekin, Gokhan; Jayaraman, Ambalavanan; Copeland, Robert; Parker, amanda; Paul, Heather L.

    2010-01-01

    Carbon dioxide (CO2) control during Extravehicular Activities (EVAs) on Mars will be challenging. Lithium hydroxide (LiOH) canisters have impractical logistics penalties, and regenerable metal oxide (MetOx) canisters weigh too much. Cycling bed systems and permeable membranes that are regenerable in space vacuum cannot vent on Mars due to the high partial pressure of CO2 in the atmosphere. Although sweep gas regeneration is under investigation, the feasibility, logistics penalties, and failure modes associated with this technique have not been fully determined. TDA Research, Inc. is developing a durable, high-capacity regenerable adsorbent that can remove CO2 from the space suit ventilation loop. The system design allows sorbent regeneration at or above 6 torr, eliminating the potential for Martian atmosphere to leak into the regeneration bed and into the ventilation loop. Regeneration during EVA eliminates the consumable requirement related to the use of LiOH canisters and the mission duration limitations imposed by MetOx system. The concept minimizes the amount of consumable to be brought from Earth and makes the mission more affordable, while providing great operational flexibility during EVA. The feasibility of the concept has been demonstrated in a series of bench-scale experiments and a preliminary system analysis. Results indicate that sorbent regeneration can be accomplished by applying a 14 C temperature swing, while regenerating at 13 torr (well above the Martian atmospheric pressure), withstanding over 1,000 adsorption/regeneration cycles. This paper presents the latest results from these sorbent and system development efforts.

  16. Évaluation de la diversité et estimation de la biomasse des arbres d ...

    African Journals Online (AJOL)

    SARAH

    31 janv. 2016 ... d'alignement des communes du Plateau et de Cocody (Abidjan - Côte d'Ivoire. 9141 ..... variations des valeurs d'équivalent CO2 par type d'espace suivent .... rôle compensatoire dans les émissions du dioxyde de carbone.

  17. Threshold amounts of organic carbon needed to initiate reductive dechlorination in groundwater systems

    Science.gov (United States)

    Chapelle, Francis H.; Thomas, Lashun K.; Bradley, Paul M.; Rectanus, Heather V.; Widdowson, Mark A.

    2012-01-01

    Aquifer sediment and groundwater chemistry data from 15 Department of Defense facilities located throughout the United States were collected and analyzed with the goal of estimating the amount of natural organic carbon needed to initiate reductive dechlorination in groundwater systems. Aquifer sediments were analyzed for hydroxylamine and NaOH-extractable organic carbon, yielding a probable underestimate of potentially bioavailable organic carbon (PBOC). Aquifer sediments were also analyzed for total organic carbon (TOC) using an elemental combustion analyzer, yielding a probable overestimate of bioavailable carbon. Concentrations of PBOC correlated linearly with TOC with a slope near one. However, concentrations of PBOC were consistently five to ten times lower than TOC. When mean concentrations of dissolved oxygen observed at each site were plotted versus PBOC, it showed that anoxic conditions were initiated at approximately 200 mg/kg of PBOC. Similarly, the accumulation of reductive dechlorination daughter products relative to parent compounds increased at a PBOC concentration of approximately 200 mg/kg. Concentrations of total hydrolysable amino acids (THAA) in sediments also increased at approximately 200 mg/kg, and bioassays showed that sediment CO2 production correlated positively with THAA. The results of this study provide an estimate for threshold amounts of bioavailable carbon present in aquifer sediments (approximately 200 mg/kg of PBOC; approximately 1,000 to 2,000 mg/kg of TOC) needed to support reductive dechlorination in groundwater systems.

  18. Towards low carbon business park energy systems: Classification of techno-economic energy models

    International Nuclear Information System (INIS)

    Timmerman, Jonas; Vandevelde, Lieven; Van Eetvelde, Greet

    2014-01-01

    To mitigate climate destabilisation, human-induced greenhouse gas emissions urgently need to be curbed. A major share of these emissions originates from the industry and energy sectors. Hence, a low carbon shift in industrial and business park energy systems is called for. Low carbon business parks minimise energy-related carbon dioxide emissions by maximal exploitation of local renewable energy production, enhanced energy efficiency, and inter-firm heat exchange, combined in a collective energy system. The holistic approach of techno-economic energy models facilitates the design of such systems, while yielding an optimal trade-off between energetic, economic and environmental performances. However, no models custom-tailored for industrial park energy systems are detected in literature. In this paper, existing energy model classifications are scanned for adequate model characteristics and accordingly, a confined number of models are selected and described. Subsequently, a practical typology is proposed, existing of energy system evolution, optimisation, simulation, accounting and integration models, and key model features are compared. Finally, important features for a business park energy model are identified. - Highlights: • A holistic perspective on (low carbon) business park energy systems is introduced. • A new categorisation of techno-economic energy models is proposed. • Model characteristics are described per model category. • Essential model features for business park energy system modelling are identified. • A strategy towards a techno-economic energy model for business parks is proposed

  19. Single-Walled Carbon Nano tubes as Fluorescence Biosensors for Pathogen Recognition in Water Systems

    International Nuclear Information System (INIS)

    Upadhyayula, V.K.K

    2008-01-01

    The possibility of using single-walled carbon nanotubes (SWCNTs) aggregates as fluorescence sensors for pathogen recognition in drinking water treatment applications has been studied. Batch adsorption study is conducted to adsorb large concentrations of Staphylococcus aureus aureus SH 1000 and Escherichia coli pKV-11 on single-walled carbon nanotubes. Subsequently the immobilized bacteria are detected with confocal microscopy by coating the nanotubes with fluorescence emitting antibodies. The Freundlich adsorption equilibrium constant (k) for S.aureus and E.coli determined from batch adsorption study was found to be 9 x108 and 2 x108 ml/g, respectively. The visualization of bacterial cells adsorbed on fluorescently modified carbon nanotubes is also clearly seen. The results indicate that hydrophobic single-walled carbon nanotubes have excellent bacterial adsorption capacity and fluorescent detection capability. This is an important advancement in designing fluorescence biosensors for pathogen recognition in water systems.

  20. Changes in the marine carbonate system of the western Arctic: patterns in a rescued data set

    Directory of Open Access Journals (Sweden)

    Lisa A. Miller

    2014-11-01

    Full Text Available A recently recovered and compiled set of inorganic carbon data collected in the Canadian Arctic since the 1970s has revealed substantial change, as well as variability, in the carbonate system of the Beaufort Sea and Canada Basin. Whereas the role of this area as a net atmospheric carbon sink has been confirmed, high pCO2 values in the upper halocline underscore the potential for CO2 outgassing as sea ice retreats and upwelling increases. In addition, increasing total inorganic carbon and decreasing alkalinity are increasing pCO2 and decreasing CaCO3 saturation states, such that undersaturation with respect to aragonite now occurs regularly in both deep waters and the upper halocline.

  1. Single-Walled Carbon Nanotubes as Fluorescence Biosensors for Pathogen Recognition in Water Systems

    Directory of Open Access Journals (Sweden)

    Venkata K. K. Upadhyayula

    2008-01-01

    Full Text Available The possibility of using single-walled carbon nanotubes (SWCNTs aggregates as fluorescence sensors for pathogen recognition in drinking water treatment applications has been studied. Batch adsorption study is conducted to adsorb large concentrations of Staphylococcus aureus aureus SH 1000 and Escherichia coli pKV-11 on single-walled carbon nanotubes. Subsequently the immobilized bacteria are detected with confocal microscopy by coating the nanotubes with fluorescence emitting antibodies. The Freundlich adsorption equilibrium constant (k for S.aureus and E.coli determined from batch adsorption study was found to be 9×108 and 2×108 ml/g, respectively. The visualization of bacterial cells adsorbed on fluorescently modified carbon nanotubes is also clearly seen. The results indicate that hydrophobic single-walled carbon nanotubes have excellent bacterial adsorption capacity and fluorescent detection capability. This is an important advancement in designing fluorescence biosensors for pathogen recognition in water systems.

  2. Carbon emission trading system of China: a linked market vs. separated markets

    Science.gov (United States)

    Liu, Yu; Feng, Shenghao; Cai, Songfeng; Zhang, Yaxiong; Zhou, Xiang; Chen, Yanbin; Chen, Zhanming

    2013-12-01

    The Chinese government intends to upgrade its current provincial carbon emission trading pilots to a nationwide scheme by 2015. This study investigates two of scenarios: separated provincial markets and a linked inter-provincial market. The carbon abatement effects of separated and linked markets are compared using two pilot provinces of Hubei and Guangdong based on a computable general equilibrium model termed Sino-TERMCo2. Simulation results show that the linked market can improve social welfare and reduce carbon emission intensity for the nation as well as for the Hubei-Guangdong bloc compared to the separated market. However, the combined system also distributes welfare more unevenly and thus increases social inequity. On the policy ground, the current results suggest that a well-constructed, nationwide carbon market complemented with adequate welfare transfer policies can be employed to replace the current top-down abatement target disaggregation practice.

  3. Some physics aspects of cermet and ceramic fast systems; Quelques aspects de la physique des reacteurs a neutrons rapides utilisant des cermets et des ceramiques comme combustibles; Nekotorye fizicheskie aspekty kermetnykh i keramicheskikh sistem na bystrykh nejtronakh; Algunos aspectos fisicos de los sistemas rapidos a base de combustibles cermet y ceramicos

    Energy Technology Data Exchange (ETDEWEB)

    Codd, J; James, M F; Mann, J E [United Kingdom Atomic Energy Authority, Reactor Group (United Kingdom)

    1962-03-15

    The characteristics of a system using an iron-based oxide cermet as fuel material are discussed. A transport theory investigation to develop methods of predicting the effect of core heterogeneity on reactivity and flux distribution is described. Some preliminary calculations are also given of resonance self-shielding and Doppler temperature effects in a cermet system. (author) [French] Les auteurs etudient les caracteristique s d'un reacteur utilisant comme combustible un cermet d'oxydes a armature de fer. Ils exposent une application de la theorie du transport a la mise au point des methodes permettant de prevoir l'effet de l'heterogeneite du coeur sur la reactivite et sur la distribution du flux. Ils donnent egalement quelques calculs preliminaires d'effets d'autoprotection due a la resonance et d'effet Doppler du a la chaleur dans un reacteur utilisant un cermet. (author) [Spanish] La memoria discute las caracteristicas de un sistema que emplea como combustible un oxido tipo cermet a base de hierro. Describe una investigacion de la teoria de transporte con miras a desarrollar metodos para evaluar el efecto de la heterogeneidad del cuerpo sobre la reactividad y la distribucion de flujo. Tambien da algunos calculos preliminares de los efectos del autoblindaje por resonancia y de la temperatura de Doppler en un sistema de tipo cermet. (author) [Russian] Obsuzhdayutsya kharakteristiki sistemy, ispol'zuyushchej v kachestve toplivnogo materiala oksidnye kermety, razrabotannye na osnove zheleza. Opisyvaetsya issledovanie teorii perenosa, chtoby razvit' metody predskazaniya vliyaniya geterogennosti aktivnoj zony na reaktivnost' i raspredelenie potoka. Dayutsya takzhe nekotorye predvaritel'nye raschety ehffektov rezonansnoj samozashchity i temperaturnogo ehffekta Dopplera v kermetnoj sisteme. (author)

  4. Steel slag carbonation in a flow-through reactor system: the role of fluid-flux.

    Science.gov (United States)

    Berryman, Eleanor J; Williams-Jones, Anthony E; Migdisov, Artashes A

    2015-01-01

    Steel production is currently the largest industrial source of atmospheric CO2. As annual steel production continues to grow, the need for effective methods of reducing its carbon footprint increases correspondingly. The carbonation of the calcium-bearing phases in steel slag generated during basic oxygen furnace (BOF) steel production, in particular its major constituent, larnite {Ca2SiO4}, which is a structural analogue of olivine {(MgFe)2SiO4}, the main mineral subjected to natural carbonation in peridotites, offers the potential to offset some of these emissions. However, the controls on the nature and efficiency of steel slag carbonation are yet to be completely understood. Experiments were conducted exposing steel slag grains to a CO2-H2O mixture in both batch and flow-through reactors to investigate the impact of temperature, fluid flux, and reaction gradient on the dissolution and carbonation of steel slag. The results of these experiments show that dissolution and carbonation of BOF steel slag are more efficient in a flow-through reactor than in the batch reactors used in most previous studies. Moreover, they show that fluid flux needs to be optimized in addition to grain size, pressure, and temperature, in order to maximize the efficiency of carbonation. Based on these results, a two-stage reactor consisting of a high and a low fluid-flux chamber is proposed for CO2 sequestration by steel slag carbonation, allowing dissolution of the slag and precipitation of calcium carbonate to occur within a single flow-through system. Copyright © 2014. Published by Elsevier B.V.

  5. Comparison of carbon sequestration potential in agricultural and afforestation farming systems

    Directory of Open Access Journals (Sweden)

    Chinsu Lin

    2013-04-01

    Full Text Available In the last few decades, many forests have been cut down to make room for cultivation and to increase food or energy crops production in developing countries. In this study, carbon sequestration and wood production were evaluated on afforested farms by integrating the Gaussian diameter distribution model and exponential diameter-height model derived from sample plots of an afforested hardwood forest in Taiwan. The quantity of sequestrated carbon was determined based on aboveground biomass. Through pilot tests run on an age-volume model, an estimation bias was obtained and used to correct predicted volume estimates for a farm forest over a 20-year period. An estimated carbon sequestration of 11,254 t C was observed for a 189ha-hardwood forest which is equivalent to 41,264 t CO2. If this amount of carbon dioxide were exchanged on the Chicago Climate Exchange (CCX market, the income earned would be 821 US$ ha- 1. Carbon sequestration from rice (Oryza sativa or sugarcane (Saccharum officinarum production is discharged as a result of straw decomposition in the soil which also improves soil quality. Sugarcane production does not contribute significantly to carbon sequestration, because almost all the cane fiber is used as fuel for sugar mills. As a result of changing the farming systems to hardwood forest in this study area, carbon sequestration and carbon storage have increased at the rate of 2.98 t C ha- 1 year- 1. Net present value of afforestation for a 20-year period of carbon or wood management is estimated at around US$ 30,000 given an annual base interest rate of 3 %.

  6. Santé des adolescents et des jeunes au Burkina Faso : état des ...

    African Journals Online (AJOL)

    Il s'est agi d'une étude évaluative ayant utilisé une revue documentaire associée à une interview des acteurs clés et un atelier de validation et d'identification des interventions pertinentes pour un plan stratégique national. La situation de la santé des adolescents et des jeunes est caractérisée par des grossesses précoces ...

  7. Carbon dynamics in a Late Quaternary-age coastal limestone aquifer system undergoing saltwater intrusion.

    Science.gov (United States)

    Bryan, Eliza; Meredith, Karina T; Baker, Andy; Andersen, Martin S; Post, Vincent E A

    2017-12-31

    This study investigates the inorganic and organic aspects of the carbon cycle in groundwaters throughout the freshwater lens and transition zone of a carbonate island aquifer and identifies the transformation of carbon throughout the system. We determined 14 C and 13 C carbon isotope values for both DIC and DOC in groundwaters, and investigated the composition of DOC throughout the aquifer. In combination with hydrochemical and 3 H measurements, the chemical evolution of groundwaters was then traced from the unsaturated zone to the deeper saline zone. The data revealed three distinct water types: Fresh (F), Transition zone 1 (T1) and Transition zone 2 (T2) groundwaters. The 3 H values in F and T1 samples indicate that these groundwaters are mostly modern. 14 C DOC values are higher than 14 C DIC values and are well correlated with 3 H values. F and T1 groundwater geochemistry is dominated by carbonate mineral recrystallisation reactions that add dead carbon to the groundwater. T2 groundwaters are deeper, saline and characterised by an absence of 3 H, lower 14 C DOC values and a different DOC composition, namely a higher proportion of Humic Substances relative to total DOC. The T2 groundwaters are suggested to result from either the slow circulation of water within the seawater wedge, or from old remnant seawater caused by past sea level highstands. While further investigations are required to identify the origin of the T2 groundwaters, this study has identified their occurrence and shown that they did not evolve along the same pathway as fresh groundwaters. This study has also shown that a combined approach using 14 C and 13 C carbon isotope values for both DIC and DOC and the composition of DOC, as well as hydrochemical and 3 H measurements, can provide invaluable information regarding the transformation of carbon in a groundwater system and the evolution of fresh groundwater recharge. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. System effects of nuclear energy and renewables in low-carbon electricity Systems

    International Nuclear Information System (INIS)

    Keppler, J.H.; Gameron, R.; Cometto, M.

    2012-01-01

    Electricity produced by variable renewable energies significantly affects the economics of dispatchable power generators, in particular those of nuclear power, both in the short run and the long run; the outcome of these competing factors will depend on the amount of variable renewables being introduced, local conditions and the level of carbon prices. An assessment of grid-level system costs (including the costs for grid connection, extension and reinforcement, as well as the added costs for balancing and back-up, but excluding the financial costs of intermittency and the impacts on security of supply, the environment, siting and safety), reveals a considerable difference between those of dispatchable technologies and those of variable renewables. Using a common methodology and a broad array of country-specific data, the grid-level system costs for Finland, France, Germany, the Republic of Korea, the United Kingdom and the United States were calculated for nuclear, coal, gas, onshore wind, offshore wind and solar PV both at 10 pc and 30 pc penetration levels. Variable renewables are creating a market environment in which dispatchable technologies can no longer finance themselves through revenues in 'energy only' wholesale markets; this has serious implications for the security of electricity supplies. Four main policy recommendations are proposed

  9. Attempts to prepare an all-carbon indigoid system

    Directory of Open Access Journals (Sweden)

    Şeref Yildizhan

    2015-03-01

    Full Text Available First attempts are described to prepare a precursor for an all-carbon analog of indigo, the tetracyclic triene 4. Starting from indan-2-one (9 the α-methylene ketone 13 was prepared. Upon subjecting this compound to a McMurry coupling reaction, it dimerized to the bis-indene derivative 17, rather than providing the tetramethyl derivative of 4, the hydrocarbon 14. In a second approach, indan-1-one (18 was dimerized to the conjugated enedione 21 through the bis-1-indene dimer 19. All attempts to methylenate 21 failed, however. When 19 was treated with the Tebbe reagent, the dimer 23 was produced, presumably through a Cope reaction of the intermediately generated isomer 22. The bis-indene derivative 23 can be alkylated with 1,2-dibromoethane to produce a 1:1 mixture of the spiro compounds 24 and 25. Although 9 could be reductively dimerized to 30, the conversion of this olefin to 14 failed.

  10. Carbon dioxide based power generation in renewable energy systems

    International Nuclear Information System (INIS)

    Kumar, Pramod; Srinivasan, Kandadai

    2016-01-01

    After a substantial impact on refrigeration, carbon dioxide (CO_2) is gaining considerable attention as a working fluid for thermal power generation. This can be attributed mainly to its excellent heat transfer properties and compactness of components arising from its high density. It has the merit of being amenable to operation in sub-, trans- or super-critical Brayton cycle modes. However, inhibiting factors are high pressures needed when operated in trans- or supercritical cycles and the work of compression eroding most of the work of expansion in sub-critical cycle operation. Some of the lacunae of CO_2 such as high work of compression can be alleviated by using non-mechanical means such as thermal compression using the adsorption technique either for partial compression in high pressure Brayton cycles or for total compression in low pressure cycles. CO_2 has also been proposed as an additive to flammable hydrocarbons such that their flammability can be suppressed and yet retaining their other desirable thermodynamic qualities. This review explores the potential and limitations of thermodynamic cycles where either CO_2 is used alone or as a component in mixture of working fluids. Inter alia, it also highlights the issues of regulation of load management using the efficiency-specific power output plane. When used as a blending component, pinch point in the regenerators affects the cycle performance. The objective is to identify research and developmental challenges involving CO_2 as a working fluid specifically for solar power generation.

  11. Analysis of pipeline transportation systems for carbon dioxide sequestration

    Directory of Open Access Journals (Sweden)

    Witkowski Andrzej

    2014-03-01

    Full Text Available A commercially available ASPEN PLUS simulation using a pipe model was employed to determine the maximum safe pipeline distances to subsequent booster stations as a function of carbon dioxide (CO2 inlet pressure, ambient temperature and ground level heat flux parameters under three conditions: isothermal, adiabatic and with account of heat transfer. In the paper, the CO2 working area was assumed to be either in the liquid or in the supercritical state and results for these two states were compared. The following power station data were used: a 900 MW pulverized coal-fired power plant with 90% of CO2 recovered (156.43 kg/s and the monothanolamine absorption method for separating CO2 from flue gases. The results show that a subcooled liquid transport maximizes energy efficiency and minimizes the cost of CO2 transport over long distances under isothermal, adiabatic and heat transfer conditions. After CO2 is compressed and boosted to above 9 MPa, its temperature is usually higher than ambient temperature. The thermal insulation layer slows down the CO2 temperature decrease process, increasing the pressure drop in the pipeline. Therefore in Poland, considering the atmospheric conditions, the thermal insulation layer should not be laid on the external surface of the pipeline.

  12. Climate system properties determining the social cost of carbon

    International Nuclear Information System (INIS)

    Otto, Alexander; Allen, Myles R; Todd, Benjamin J; Bowerman, Niel; Frame, David J

    2013-01-01

    The choice of an appropriate scientific target to guide global mitigation efforts is complicated by uncertainties in the temperature response to greenhouse gas emissions. Much climate policy discourse has been based on the equilibrium global mean temperature increase following a concentration stabilization scenario. This is determined by the equilibrium climate sensitivity (ECS) which, in many studies, shows persistent, fat-tailed uncertainty. However, for many purposes, the equilibrium response is less relevant than the transient response. Here, we show that one prominent policy variable, the social cost of carbon (SCC), is generally better constrained by the transient climate response (TCR) than by the ECS. Simple analytic expressions show the SCC to be directly proportional to the TCR under idealized assumptions when the rate at which we discount future damage equals 2.8%. Using ensemble simulations of a simple climate model we find that knowing the true value of the TCR can reduce the relative uncertainty in the SCC substantially more, up to a factor of 3, than knowing the ECS under typical discounting assumptions. We conclude that the TCR, which is better constrained by observations, less subject to fat-tailed uncertainty and more directly related to the SCC, is generally preferable to the ECS as a single proxy for the climate response in SCC calculations. (letter)

  13. Analysis of pipeline transportation systems for carbon dioxide sequestration

    Science.gov (United States)

    Witkowski, Andrzej; Majkut, Mirosław; Rulik, Sebastian

    2014-03-01

    A commercially available ASPEN PLUS simulation using a pipe model was employed to determine the maximum safe pipeline distances to subsequent booster stations as a function of carbon dioxide (CO2) inlet pressure, ambient temperature and ground level heat flux parameters under three conditions: isothermal, adiabatic and with account of heat transfer. In the paper, the CO2 working area was assumed to be either in the liquid or in the supercritical state and results for these two states were compared. The following power station data were used: a 900 MW pulverized coal-fired power plant with 90% of CO2 recovered (156.43 kg/s) and the monothanolamine absorption method for separating CO2 from flue gases. The results show that a subcooled liquid transport maximizes energy efficiency and minimizes the cost of CO2 transport over long distances under isothermal, adiabatic and heat transfer conditions. After CO2 is compressed and boosted to above 9 MPa, its temperature is usually higher than ambient temperature. The thermal insulation layer slows down the CO2 temperature decrease process, increasing the pressure drop in the pipeline. Therefore in Poland, considering the atmospheric conditions, the thermal insulation layer should not be laid on the external surface of the pipeline.

  14. Climate system properties determining the social cost of carbon

    Science.gov (United States)

    Otto, Alexander; Todd, Benjamin J.; Bowerman, Niel; Frame, David J.; Allen, Myles R.

    2013-06-01

    The choice of an appropriate scientific target to guide global mitigation efforts is complicated by uncertainties in the temperature response to greenhouse gas emissions. Much climate policy discourse has been based on the equilibrium global mean temperature increase following a concentration stabilization scenario. This is determined by the equilibrium climate sensitivity (ECS) which, in many studies, shows persistent, fat-tailed uncertainty. However, for many purposes, the equilibrium response is less relevant than the transient response. Here, we show that one prominent policy variable, the social cost of carbon (SCC), is generally better constrained by the transient climate response (TCR) than by the ECS. Simple analytic expressions show the SCC to be directly proportional to the TCR under idealized assumptions when the rate at which we discount future damage equals 2.8%. Using ensemble simulations of a simple climate model we find that knowing the true value of the TCR can reduce the relative uncertainty in the SCC substantially more, up to a factor of 3, than knowing the ECS under typical discounting assumptions. We conclude that the TCR, which is better constrained by observations, less subject to fat-tailed uncertainty and more directly related to the SCC, is generally preferable to the ECS as a single proxy for the climate response in SCC calculations.

  15. Etude comparative sur la propagation de l'endommagement apres impact des composites carbone/epoxy renforces par piquage au fil Kevlar et titane-nickel

    Science.gov (United States)

    Vachon, Pierre-Luc

    Composite laminates have strong in-plane mechanical properties, but they are generally weaker through their thickness. This specificity makes the laminates prone to delamination, particularly under low-velocity impact loads. Consequently numerous research efforts have been dedicated to developing interlaminar reinforcing methods, such as transverse stitching. The present project proposes the use of the stitching technique combined with a special stitching thread made of superelastic TiNi alloy. This technology is intended to improve the delamination toughness in composite laminates loaded in bending. In the first part of this study a numerical model was developed for analyzing composite structures. The 3-D finite element model was built with the ANSYS commercial software using 20-node solid and 8-node shell elements. The progressive damage modeling technique was used, allowing the prediction of delamination propagation in a laminate submitted to various loading modes. The model was validated for a plate under quasi-static traction load, and it was then used to simulate three-point bending tests. Secondly, carbon/epoxy composite panels were fabricated, with each panel containing unstitched and stitched specimens. Two different materials were used for the stitching thread: superelastic TiNi wires and Kevlar threads as a reference. Some stitched specimens were cut in slices in order to make some observations of the internal stitch using an optical microscope. Standardized low-velocity impact tests and compression after impact tests were carried out on stitched and unstitched specimens (ASTM D7136 and D7137). The Kevlar reinforcements have shown great performance in reducing the delaminated zone after impact, as well as in improving the residual compression strength. The TiNi reinforcements provided encouraging results during the impact tests, though being less effective than the Kevlar threads. During the compression after impact tests, only a slight difference could

  16. Diethylstilbestrol (DES) and Cancer

    Science.gov (United States)

    ... DES-exposed grandchildren have? Researchers are also studying possible health effects among women and men who are the children ... for unexposed men. In addition, researchers are studying possible health effects on the grandchildren of mothers who were exposed ...

  17. Table des illustrations

    OpenAIRE

    2016-01-01

    Tableaux Dates d’inauguration des grands hôtels japonais entre 1860 et 1945… 19 Histoire, tourisme et hôtellerie en Corée depuis les années 1870… 59-60 Dates d’inauguration des grands hôtels chinois depuis 1863… 84 Les hôtels de luxe et leurs capacités d’hébergement en Corée en 2000… 103 Les flux de personnes suscités par les hôtels « super luxe » de Séoul en 2000… 105 L’activité des grands hôtels à Séoul en 1999 (en wons)… 106 Propriété et gestion des grands hôtels à Séoul en 1999…. 110 La c...

  18. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    potential and surface properties of their mixtures were investigated, in an ... suppose that the electrostatic repulsive interactions between the two anion ... concentration, et de la conformation des ..... proteins and polysaccharides in solutions,.

  19. Carbon in Spanish electric system; El carbon en el sistema electrico espanol

    Energy Technology Data Exchange (ETDEWEB)

    Menendez Perez, E.; Camara Rascon, A.

    2002-07-01

    In this document is analysed the electrical Spanish system in the horizon of the three next decades, revising the different sources of generation, but with the look focused specifically toward the paper that the coal must play in the same, having basically to debit the questions of energetic security, environmental incidence that implies the use of the coal, and the social and economic aspects. (Author)

  20. Modèle de confinement pour les colonnes de section circulaire en béton armé confiné avec des enveloppes en polymère renforcé de fibres de carbone Confinement model for circular RC columns wrapped with CFRP composite

    Directory of Open Access Journals (Sweden)

    Benzaid R.

    2012-09-01

    Full Text Available Un programme experimental comprenant des essais sur 30 cylindres 160×320 mm a ete mene en vue de determiner le gain de resistance et de ductilite du beton confine par collage externe de tissu de polymere renforce de fibres de carbone (PRFC. Les variables etudiees sont la resistance a la compression du beton non confine f’co, le niveau de confinement, exprime par le nombre de plis de PRFC applique aux eprouvettes. La deformation circonferentielle a la rupture du composite PRF et l’feffet de la pression de confinement laterale effective de l’fenveloppe composite ont ete egalement etudies. Pour l’fensemble des specimens testes, l’faugmentation de la rigidite du confinement entraine a la fois une augmentation significative de la resistance a la compression axiale et de la ductilite des specimens en beton confine avec des PRFC par rapport aux specimens en beton non confine. Base sur les resultats experimentaux, un modele de confinement pratique est propose pour predire la resistance a la compression maximale du beton confine avec des materiaux composites (f’cc et la deformation axiale correspondante (εcc. The present paper deals with the analysis of experimental results, in terms of load carrying capacity and strains, obtained from tests on plain- and reinforced- concrete (RC cylinder, strengthened with external carbon-fiber-reinforced polymer (CFRP. The parameters considered are the number of composite layers, the compressive strength of unconfined concrete. The effective circumferential FRP failure strain and the effect of the effective lateral confining pressure were investigated. Totally thirty cylinders (160×320 mm were subjected to axial compression which includes control specimens. All the test specimens were loaded to failure in axial compression and the behaviour of the specimens in the axial and transverse directions was investigated. Test results shown that the CFRP wrap increases the strength and ductility of reinforced

  1. Capturing low-carbon power system dynamics : Interactions between intermittent renewables and power plants with CO2 capture and storage

    NARCIS (Netherlands)

    Brouwer, Anne-Sjoerd

    2015-01-01

    Low-carbon power systems are needed by the year 2050 to meet climate change mitigation targets. This dissertation investigates the operational and economic feasibility of such future low-carbon power systems by simulating the Dutch and European power systems. Particular attention is paid to the

  2. Analysis: climate policy in the United States: what economic instrument for a carbon price signal?; Politique climatique des Etats-Unis: quel instrument economique pour un signal-prix carbone?

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-03-15

    At the time of his election as President of the United States, Barack Obama declared that 'We will make it clear to the world that America is ready to lead to protect our environment'. The 2050 objective of cutting CO{sub 2} emissions by 80% compared to the 1990 level, as affirmed in the election campaign, will involve directing the market in accordance with a carbon price signal that includes the true cost of greenhouse gas emissions so as to establish a policy that is both effective and credible, i.e. likely to lead developing countries into the global effort. An emission allowance market, rather than a carbon tax, should therefore come into being. However, those who advocate the tax - more numerous in academic circles than among political decision-makers - are sharpening up their arguments. In particular, they identify the measures to be taken if we wish to attain an environmental objective and curb social inequalities. Similar arguments could serve as the basis for an international agreement that would strongly incite emerging countries to reduce their emissions while remaining equitable towards them. (author)

  3. Detection and spatial characterization of carbon steel pitting corrosion in anaerobic sulpho-genic medium; Detection et caracterisation spatiale de la corrosion localisee des aciers au carbone en milieu anaerobie sulfurogene

    Energy Technology Data Exchange (ETDEWEB)

    Festy, D.; Forest, B. [Institut francais de Recherche pour l' Exploitation de la Mer - IFREMER, Centre de Brest, Service Materiaux et Structures, 29 - Plouzane (France); Keddam, M.; Monfort Moros, N.; Tribollet, B. [UPR 15 du CNRS Lab. de Physique des Liquides et Electrochimie, 75 - Paris (France); Marchal, R.; Monfort Moros, N. [Institut Francais du Petrole (IFP), Div. Chimie et Physico-Chimie Appliquee, Dept. Microbiologie, 92 - Rueil-Malmaison (France)

    2002-07-01

    The bio-film developing on carbon steel surfaces in anaerobic condition may induce localised corrosion. To be able to better understand this type of bio-corrosion, this piper presents a new electrochemical technique, which has been developed in collaboration between IFREMER and the Laboratory for liquid physic and electrochemistry. Focussed on local aspect of this phenomenon, the described technique enables surface torrent density mapping to be performed and anodic or cathodic zones to be identified. A double micro-electrode probe is placed closed to the steel simple surface and potential difference between them is measured. This value is directly connected to ohmic drop within electrolyte and consequently, to local torrent. By scanning the substrate surface, local torrent repartition is visualized and one tan detect and characterise Localised corrosion attacks. After presenting the technique and the calibration procedure, a bio-corrosion phenomenon induced by stripping a bio-film at a carbon steel simple surface is analysed by successively drawing localised torrent maps, included biocide efficiency assessment. (authors)

  4. Nuclear Energy and Renewables: System Effects in Low-carbon Electricity Systems : Method comments to a NEA report

    OpenAIRE

    Söder, Lennart

    2012-01-01

    OECD Nuclear Energy Agency (NEA) released a new report on 29 November 2012. The study recommends that decision-makers should take full electricity system costs into account in energy choices and that such costs should be internalised according to a “generator pays” principle. The study, entitled Nuclear Energy and Renewables: System Effects in Low-carbon Electricity Systems, addresses the increasingly important interactions of variable renewables and dispatchable energy technologies, such as ...

  5. Measurement of organic carbon stable isotope composition of different soil types by EA-IRMS system

    International Nuclear Information System (INIS)

    Qi Biao; Ding Lingling; Cui Jiehua; Wang Yanhong

    2009-01-01

    Element analyzer-isotope ratio mass spectrometers (EA-IRMS) is a rapid and precise method for measuring stable carbon isotope. Pure CO 2 reference gas was calibrated via international standard-Urea, and the δ 13 C us PDB value of pure CO 2 is (-29.523 ± 0.0181)%. Stability and linearity of the EA-IRMS system, precision of δ 13 C measurement for samples were tested through experimental comparison. Moreover, determination method of organic carbon stable isotope in soil was based on the system. The EA-IRMS system had well linearity when ion intensity ranged from 1.0 to 7.0V, and it excelled the total linearity when the ion intensity was from 1.5 to 5.0V, and the accurate result of δ 13 C for sample analysis could be obtained with precision of 0.015%. If carbon content in sample is more than 5μg, the requirement for analyzing accurate result of δ 13 C could be achieved. The organic carbon stable isotope was measured in 18 different types soil samples, the average natural abundance of 13 C was 1.082%, and the organic carbon stable isotope composition was significantly different among different type soils. (authors)

  6. Perancangan Enkripsi Pada Citra Bitmap Dengan Algoritma Des, Triple Des, dan Idea

    Directory of Open Access Journals (Sweden)

    Agustinna Yosanny

    2010-12-01

    Full Text Available Rapid development of Information Technology causes information can access easier without space boundaries. Image is a form of information, which contains many information. Some image contains confidential information that cannot distribute to unauthorized persons. Therefore, image encryption application is create to encrypt part of image that has confidential information. The image encryption application is encrypt image by applying DES, Triple DES, and IDEA algorithms. The research was applying analysis and design methodology. The analysis methodology was undertaken through literature study and algorithm research and testing. The design methodology was undertaken through database, features, system, and screen layout design. Results of the research are image encryption application that can encrypt part of image and or all of image by applying three algorithms such as DES, Triple DES, and IDEA. This application is show comparation of these algorithms. In conclusion, method of encryption can apply to image, so that confidential information of the image can protect from unauthorized person. 

  7. Analysis of photovoltaic systems. Leadership/cooperation in Task II of the IEA Implementing Agreements Photovoltaic Power Systems, database operation; Analyse des Betriebsverhaltens von Photovoltaiksystemen. Leitung/Mitarbeit im Task II des IEA Implementing Agreements Photovoltaic Power Systems, Betrieb der Datenbank. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Schreitmueller, K.; Niemann, M.; Decker, B.; Jahn, U.; Meyer, H.

    2000-02-01

    the analysis of PV systems of the different types addressed in the database are presented and discussed. (orig.) [German] Im Rahmen des Vorhabens wurde an den laufenden Arbeiten im Task II des 'Photovoltaic Power System Programme' (PVPS) der Internationalen Energieagentur (IEA) wesentlich mitgewirkt. Es ist eine zentrale Aufgabe des Task II, das Wissen ueber die Auslegung und das Betriebsverhalten von Photovoltaik(PV)-Systemen zu verbreiten und durch Ansprache geeigneter Zielgruppen die Markteinfuehrung der PV-Technologie voranzutreiben. Dabei stuetzt sich das Vorhaben auf die Erstellung und Aktualisierung einer dezentralen Datenbank, in der sowohl detaillierte Anlagedaten von realisierten PV-Anlagen als auch monatsaufgeloeste Betriebsergebnisse der vermessenen PV-Systeme gesammelt und aufbereitet werden. Ziel der Arbeiten ist es, Informationen ueber Energieertraege, Zuverlaessigkeit und Kosten von verschiedenen PV-Systemen aus der ganzen Welt bereitzustellen und Richtlinien fuer optimale PV-Anlagen in Bezug auf ihr Betriebsverhalten und ihre Auslegung zu entwickeln. Die dezentrale Datenbank auf PC-Basis wurde im ISFH erstellt und konfiguriert. Das Datenbankprogramm besteht aus dem Programm 'PVbase' und dem Programm 'PVreport'. Umfangreiche Softwarewerkzeuge erlauben die Selektion von PV-Anlagen, die graphische und statistische Aufarbeitung der relevanten Daten von PV-Anlagen und den Export von berechneten Jahresmittelwerten. Die Datenbank enthaelt derzeit mehr als 260 PV-Anlagen mit monatlichen Datensaetzen von ueber 600 Betriebsjahren. Neben den allgemeinen Informationen sind Angaben ueber die Art der PV-Anlage (Netzverbund, Insel- oder Hybridanlage), ihre Montageart, ihre verwendeten Komponenten und oekonomische Daten enthalten. Die Datenbank umfasst einen grossen Anteil weltweit realisierter PV-Anlagen mit installierter Messdatenerfassung. Der Nutzen der kontinuierlich verbesserten Datenbank liegt in der Verbreitung von Informationen

  8. Change impact analysis on the life cycle carbon emissions of energy systems – The nuclear example

    International Nuclear Information System (INIS)

    Nian, Victor

    2015-01-01

    Highlights: • This paper evaluates the life cycle carbon emission of nuclear power in a scenario based approach. • It quantifies the impacts to the LCA results from the change in design parameters. • The methodology can give indications towards preferred or favorable designs. • The findings contribute to the life cycle inventories of energy systems. - Abstract: The life cycle carbon emission factor (measured by t-CO 2 /GW h) of nuclear power is much lower than those of fossil fueled power generation technologies. However, the fact of nuclear energy being a low carbon power source comes with many assumptions. These assumptions range from system and process definitions, to input–output definitions, to system boundary and cut-off criteria selections, and life cycle inventory dataset. However, there is a somewhat neglected but critical aspect – the design aspect. This refers to the impacts on the life cycle carbon emissions from the change in design parameters related to nuclear power. The design parameters identified in this paper include: (1) the uranium ore grade, (2) the critical process technologies, represented by the average initial enrichment concentration of 235 U in the reactor fuel, and (3) the size of the nuclear power reactor (measured by the generating capacity). If not properly tested, assumptions in the design aspect can lead to an erroneous estimation on the life cycle carbon emission factor of nuclear power. In this paper, a methodology is developed using the Process Chain Analysis (PCA) approach to quantify the impacts of the changes in the selected design parameters on the life cycle carbon emission factor of nuclear power. The concept of doing so broadens the scope of PCAs on energy systems from “one-off” calculation to analysis towards favorable/preferred designs. The findings from the analyses can serve as addition to the life cycle inventory database for nuclear power as well as provide indications for the sustainability of

  9. Carbonate Channel-Levee Systems Influenced by Mass-Transport Deposition, Browse Basin, Australia

    Science.gov (United States)

    Dunlap, D.; Janson, X.; Sanchez-Phelps, C.; Covault, J. A.

    2017-12-01

    Submarine channels are primary conduits for clastic sediment transport to deep-water basins, thereby controlling the location of marine depocenters and sediment bypass. The evolution and depositional character of submarine channels have broad implications to sediment dispersal, sediment quality, and hydrocarbon exploration potential. Siliciclastic channel systems have been extensively studied in modern environments, seismic and outcrop; however, carbonate channel-levee deposits have only recently been explored. Here we utilize newly released high-resolution (90 Hz) seismic-reflection data from the Australian Browse Basin to document the influence of mass-transport complex (MTC) deposition on the stratigraphic architecture of