78 FR 46528 - Surety Bond Guarantee Program

Science.gov (United States)

2013-08-01

... 2013, Public Law 112-239, 126 Stat. 1632: (1) Increasing the contract amount for which SBA is... remedies under contract law, the Act, and the regulations in this part, SBA is relieved of liability in...), including the provisions that increase the contract amounts for which SBA is authorized to guarantee bonds...

20 CFR 404.230 - Guaranteed alternative.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Guaranteed alternative. 404.230 Section 404... INSURANCE (1950- ) Computing Primary Insurance Amounts Guaranteed Alternative for People Reaching Age 62 After 1978 But Before 1984 § 404.230 Guaranteed alternative. (a) General. If you reach age 62 after 1978...

ACCESS TO FINANCE FOR SMEs BY CREDIT GUARANTEE SCHEMES IN TURKEY

OpenAIRE

Sarigul, Hasmet

2013-01-01

Credit guarantee schemes assist banks in lending to SMEs by overcoming collateral problems. The guarantees are used to share the risk between the bank and the guarantee institution in an agreed ratio. Thus, the bank’s risk and operation costs are lowered and its returns increased. This encourages banks to lend to SMEs who are unable to provide adequate collateral. In our study, we investigate the relationship between SMEs, banks and CGSs. We also aimed to explain the functioning of CGSs...

Bank guarantee in Serbian and European legal systems

Directory of Open Access Journals (Sweden)

Pajtić Bojan L.

2015-01-01

Full Text Available The paper analyses a bank guarantee as an institute derived from a surety contract. By issuing a bank guarantee the bank commits to the creditor that it will fulfill valid and due liabilities of a debtor, in the event of default by the debtor. This collateral demonstrates significant advantages as compared to other personal assets, particularly with regards to a higher level of protection to creditors in contractual relations. Due to the aforementioned benefit the institute has been increasingly applied in legal dealings, both in our and other legal systems. In the paper, I will point out normative solutions in terms of regulation of a bank guarantee as a specific legal activity in which there is no accessoriness, which is not the case with security. This research particularly focuses on the comparative legal analysis of this collateral.

Probabilistic double guarantee kidnapping detection in SLAM.

Science.gov (United States)

Tian, Yang; Ma, Shugen

2016-01-01

For determining whether kidnapping has happened and which type of kidnapping it is while a robot performs autonomous tasks in an unknown environment, a double guarantee kidnapping detection (DGKD) method has been proposed. The good performance of DGKD in a relative small environment is shown. However, a limitation of DGKD is found in a large-scale environment by our recent work. In order to increase the adaptability of DGKD in a large-scale environment, an improved method called probabilistic double guarantee kidnapping detection is proposed in this paper to combine probability of features' positions and the robot's posture. Simulation results demonstrate the validity and accuracy of the proposed method.

Government guarantees and public debt in Croatia

Directory of Open Access Journals (Sweden)

Anto Bajo

2011-09-01

Full Text Available Government fi nancial and performance guarantees have been issued in Croatia since 1996, to support funding and ensure favourable borrowing conditions in the fi nancial market for companies in majority state ownership. However, government guarantees have rarely been part of defi ned strategies and goals of public debt and risk management. Despite their steady growth, the structure of active guarantees and their infl uence on Croatian public debt are still unknown. This paper analyses the amount and structure of state guarantees, their maturities and the authority and accountability for their management, and it compares the structure of guarantees in terms of economic sectors. The main objective of the paper is to determine the infl uence of government guarantees on the public debt growth.

Marketing service guarantees for health care.

Science.gov (United States)

Levy, J S

1999-01-01

The author introduces the concept of service guarantees for application in health care and differentiates between explicit, implicit, and conditional vs. unconditional types of guarantees. An example of an unconditional guarantee of satisfaction is provided by the hospitality industry. Firms conveying an implicit guarantee are those with outstanding reputations for products such as luxury automobiles, or ultimate customer service, like Nordstrom. Federal Express and Domino's Pizza offer explicit guarantees of on-time delivery. Taking this concept into efforts to improve health care delivery involves a number of caveats. Customers invited to use exceptional service cards may use these to record either satisfaction or dissatisfaction. The cards need to provide enough specific information about issues so that "immediate action could be taken to improve processes." Front-line employees should be empowered to respond to complaints in a meaningful way to resolve the problem before the client leaves the premises.

Optimal design of uptime-guarantee contracts under IGFR valuations and convex costs

OpenAIRE

Hezarkhni, Behzad

2016-01-01

An uptime-guarantee contract commits a service provider to maintain the functionality of a customer’s equipment at least for certain fraction of working time during a contracted period. This paper addresses the optimal design of uptime-guarantee contracts for the service provider when the customer’s valuation of a contract with a given guaranteed uptime level has an Increasing Generalized Failure Rate (IGFR) distribution. We first consider the case where the service provider proposes only one...

MAPLE deposition of nanomaterials

International Nuclear Information System (INIS)

Caricato, A.P.; Arima, V.; Catalano, M.; Cesaria, M.; Cozzoli, P.D.; Martino, M.; Taurino, A.; Rella, R.; Scarfiello, R.; Tunno, T.; Zacheo, A.

2014-01-01

The matrix-assisted pulsed laser evaporation (MAPLE) has been recently exploited for depositing films of nanomaterials by combining the advantages of colloidal inorganic nanoparticles and laser-based techniques. MAPLE-deposition of nanomaterials meeting applicative purposes demands their peculiar properties to be taken into account while planning depositions to guarantee a congruent transfer (in terms of crystal structure and geometric features) and explain the deposition outcome. In particular, since nanofluids can enhance thermal conductivity with respect to conventional fluids, laser-induced heating can induce different ablation thermal regimes as compared to the MAPLE-treatment of soft materials. Moreover, nanoparticles exhibit lower melting temperatures and can experience pre-melting phenomena as compared to their bulk counterparts, which could easily induce shape and or crystal phase modification of the material to be deposited even at very low fluences. In this complex scenario, this review paper focuses on examples of MAPLE-depositions of size and shape controlled nanoparticles for different applications highlights advantages and challenges of the MAPLE-technique. The influence of the deposition parameters on the physical mechanisms which govern the deposition process is discussed.

MAPLE deposition of nanomaterials

Energy Technology Data Exchange (ETDEWEB)

Caricato, A.P., E-mail: annapaola.caricato@le.infn.it [Department of Mathematics and Physics “E. De Giorgi”, University of Salento, Via Arnesano, I-73100 Lecce (Italy); Arima, V.; Catalano, M. [National Nanotechnology Laboratory (NNL), CNR Istituto Nanoscienze, c/o Distretto Tecnologico, Via Arnesano n. 16, I-73100 Lecce (Italy); Cesaria, M. [Department of Mathematics and Physics “E. De Giorgi”, University of Salento, Via Arnesano, I-73100 Lecce (Italy); Cozzoli, P.D. [Department of Mathematics and Physics “E. De Giorgi”, University of Salento, Via Arnesano, I-73100 Lecce (Italy); National Nanotechnology Laboratory (NNL), CNR Istituto Nanoscienze, c/o Distretto Tecnologico, Via Arnesano n. 16, I-73100 Lecce (Italy); Martino, M. [Department of Mathematics and Physics “E. De Giorgi”, University of Salento, Via Arnesano, I-73100 Lecce (Italy); Taurino, A.; Rella, R. [Institute for Microelectronics and Microsystems, IMM-CNR, Via Monteroni, I-73100 Lecce (Italy); Scarfiello, R. [National Nanotechnology Laboratory (NNL), CNR Istituto Nanoscienze, c/o Distretto Tecnologico, Via Arnesano n. 16, I-73100 Lecce (Italy); Tunno, T. [Department of Mathematics and Physics “E. De Giorgi”, University of Salento, Via Arnesano, I-73100 Lecce (Italy); Zacheo, A. [Department of Mathematics and Physics “E. De Giorgi”, University of Salento, Via Arnesano, I-73100 Lecce (Italy); National Nanotechnology Laboratory (NNL), CNR Istituto Nanoscienze, c/o Distretto Tecnologico, Via Arnesano n. 16, I-73100 Lecce (Italy)

2014-05-01

The matrix-assisted pulsed laser evaporation (MAPLE) has been recently exploited for depositing films of nanomaterials by combining the advantages of colloidal inorganic nanoparticles and laser-based techniques. MAPLE-deposition of nanomaterials meeting applicative purposes demands their peculiar properties to be taken into account while planning depositions to guarantee a congruent transfer (in terms of crystal structure and geometric features) and explain the deposition outcome. In particular, since nanofluids can enhance thermal conductivity with respect to conventional fluids, laser-induced heating can induce different ablation thermal regimes as compared to the MAPLE-treatment of soft materials. Moreover, nanoparticles exhibit lower melting temperatures and can experience pre-melting phenomena as compared to their bulk counterparts, which could easily induce shape and or crystal phase modification of the material to be deposited even at very low fluences. In this complex scenario, this review paper focuses on examples of MAPLE-depositions of size and shape controlled nanoparticles for different applications highlights advantages and challenges of the MAPLE-technique. The influence of the deposition parameters on the physical mechanisms which govern the deposition process is discussed.

The impact of SMEs’ lending and credit guarantee on bank efficiency in South Korea

Directory of Open Access Journals (Sweden)

Lien-Wen Liang

2017-12-01

Full Text Available This study examines how small and medium-size enterprises’ (SMEs’ lending and credit guarantee affect Korean banks’ efficiency, by employing the stochastic frontier approach on 14 banks over the period 2001–2010. When lending increases to SMEs, the findings indicate that banks’ cost efficiency decreases due to information asymmetry. However, the increased proportion of credit guarantee can improve their cost efficiency. This proves that South Korea’s credit guarantee system can indeed share SMEs’ credit risk of lending in order to help raise bank efficiency.

Guarantees come to professional service firms.

Science.gov (United States)

Hart, C W; Schlesinger, L A; Maher, D

1992-01-01

Can lawyers, doctors, investment bankers, accountants, and consultants guarantee their work? Your money back if not absolutely delighted? Some professional service firms are doing exactly that, and they believe they are gaining not only satisfied customers but higher market share and improved service quality. The authors discuss the benefits and risks of unconditional and more limited guarantees. Firms that address this issue proactively now, they argue, will be less likely to rush into poorly considered guarantees later.

75 FR 4707 - Continuous Construction-Permanent Loan Guarantees Under the Section 538 Guaranteed Rural Rental...

Science.gov (United States)

2010-01-29

... permanent financing phase of a project. In addition to the proposed form of guarantee, the Agency will... financing phase of the project. This third form of guarantee is being proposed in response to input from... requests. * * * * * Lease-up period. The period of time that begins when the first unit in the project...

IMPROVING THE PROVISION OF STATE GUARANTEES UNDER CREDITS OR BONDED LOANS RAISED FOR INVESTMENT PROJECTS IMPLEMENTATION

Directory of Open Access Journals (Sweden)

Lola D. Sanginova

2015-01-01

Full Text Available Importance: Under current conditions, the Russian economy needs investment resources to ensure sustainable social and economic development. One of instruments of state-financing backing that can be used to support capital intensive, economically viable, financially and socially efficient investment projects that create "growing points" are state guarantees of theRussian Federation.Objective: The objective of this study is to identify possible ways to improve the requirements and procedures of providing state guarantees of theRussian Federationwhich contribute to the increase in the quantity and quality of investment projects of high social importance. Methods: Through the use of general scientific methods, analysis and synthesis, induction and deduction the possibility of creating a more attractive environment for principals is analyzed, measures to reduce the risk for public legal entities in providing state guarantees of theRussian Federationunder credits or bonded loans raised for investment projects implementation.Results: Principles of state guarantee support that ensure the interests of both the principals and the guarantor are defined. The basic directions for improving the mechanism how state guarantees of theRussian Federationsupport investment projects are justified. These directions include increasing availability of obtaining state guarantee support by lowering the cost of investment projects for which the state guarantees may be provided; reducing time of decision making on granting a state guarantee; increasing the creditors’ responsibility for a qualitative assessment of the creditworthiness of principals and investment projects; changing the methodology for assessing the social efficiency of investment projects; increasing the information transparency of provided state guarantees of the Russian Federation.Conclusions: The main result of this study is that under current conditions of economic turbulence state guarantees of the

Increasing importance of deposition of reduced nitrogen in the United States

Science.gov (United States)

Yi Li; Bret A. Schichtel; John T. Walker; Donna B. Schwede; Xi Chen; Christopher M. B. Lehmann; Melissa A. Puchalski; David A. Gay; Jeffrey L. Collett

2016-01-01

Rapid development of agriculture and fossil fuel combustion greatly increased US reactive nitrogen emissions to the atmosphere in the second half of the 20th century, resulting in excess nitrogen deposition to natural ecosystems. Recent efforts to lower nitrogen oxides emissions have substantially decreased nitrate wet deposition. Levels of wet ammonium...

Interface Input/Output Automata: Splitting Assumptions from Guarantees

DEFF Research Database (Denmark)

Larsen, Kim Guldstrand; Nyman, Ulrik; Wasowski, Andrzej

2006-01-01

's \\IOAs [11], relying on a context dependent notion of refinement based on relativized language inclusion. There are two main contributions of the work. First, we explicitly separate assumptions from guarantees, increasing the modeling power of the specification language and demonstrating an interesting...

78 FR 63158 - Information Collection; Guaranteed Farm Loan Program

Science.gov (United States)

2013-10-23

... DEPARTMENT OF AGRICULTURE Farm Service Agency Information Collection; Guaranteed Farm Loan Program... collection associated with the Guaranteed Farm Loan Program. The amended estimate adds the merger of the information collection for the Land Contract Guarantee Program (0560-0279) into the Guaranteed Farm Loan...

The pricing of bank debt guarantees

NARCIS (Netherlands)

Arping, S.

2009-01-01

We analyze the optimal pricing of government-sponsored bank debt guarantees within the context of an asset substitution framework. We show that the desirability of fair pricing of guarantees depends on the degree of transparency of the banking sector: in relatively opaque banking systems, fair

22 CFR 231.04 - Guarantee eligibility.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Guarantee eligibility. 231.04 Section 231.04 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ARAB REPUBLIC OF EGYPT LOAN GUARANTEES ISSUED UNDER THE EMERGENCY WARTIME SUPPLEMENTAL APPROPRIATIONS ACT OF 2003, PUBLIC LAW 108-11-STANDARD TERMS AND...

Understanding consumer response to service guarantees

International Nuclear Information System (INIS)

Taylor, E.L.; Cole, J.M.

1999-01-01

Whether the goal is customer loyalty to a competitive energy service provider or customer satisfaction with monopoly distribution services, service guarantees must be seen as one way a company can communicate with its customers about the relationship it has (or wants) with them. In short, service guarantees must be evaluated as part of a company's overall brand management strategy. To do this, a conceptual framework within which to develop and link models of service delivery and brand management is needed. This means seeing both as examples of inference management. In this article the authors first interpret findings from their research on utility service guarantees in light of the model of service delivery proposed by Smith, Bolton, and Wagner. The authors then situate this model within their own model of utility brand management. The resulting approach can be used by a utility to evaluate whether and how to adopt service guarantees as part of its overall branding strategy

Understanding consumer response to service guarantees

Energy Technology Data Exchange (ETDEWEB)

Taylor, E.L.; Cole, J.M.

1999-10-01

Whether the goal is customer loyalty to a competitive energy service provider or customer satisfaction with monopoly distribution services, service guarantees must be seen as one way a company can communicate with its customers about the relationship it has (or wants) with them. In short, service guarantees must be evaluated as part of a company's overall brand management strategy. To do this, a conceptual framework within which to develop and link models of service delivery and brand management is needed. This means seeing both as examples of inference management. In this article the authors first interpret findings from their research on utility service guarantees in light of the model of service delivery proposed by Smith, Bolton, and Wagner. The authors then situate this model within their own model of utility brand management. The resulting approach can be used by a utility to evaluate whether and how to adopt service guarantees as part of its overall branding strategy.

Nitrogen deposition increases the acquisition of phosphorus and potassium by heather Calluna vulgaris

International Nuclear Information System (INIS)

Rowe, Edwin C.; Smart, Simon M.; Kennedy, Valerie H.; Emmett, Bridget A.; Evans, Christopher D.

2008-01-01

Increased plant productivity due to nitrogen pollution increases the strength of the global carbon sink, but is implicated in plant diversity loss. However, modelling and experimental studies have suggested that these effects are constrained by availability of other nutrients. In a survey of element concentrations in Calluna vulgaris across an N deposition gradient in the UK, shoot concentrations of N and more surprisingly phosphorus and potassium were positively correlated with N deposition; tissue N/P ratio even decreased with N deposition. Elevated P and K concentrations possibly resulted from improved acquisition due to additional enzyme production or mycorrhizal activity. Heather occurs on organic soils where nutrient limitations are likely due to availability constraints rather than small stocks. However, if this effect extends to other plant and soil types, effects of N deposition on C sinks and plant competition may not be as constrained by availability of other nutrients as previously proposed. - Heather tissue phosphorus and potassium concentrations increased across a nitrogen deposition gradient, implying that nitrogen limited acquisition of other plant nutrients

22 CFR 231.03 - The Guarantee.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false The Guarantee. 231.03 Section 231.03 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ARAB REPUBLIC OF EGYPT LOAN GUARANTEES ISSUED UNDER THE EMERGENCY WARTIME SUPPLEMENTAL APPROPRIATIONS ACT OF 2003, PUBLIC LAW 108-11-STANDARD TERMS AND CONDITIONS...

19 CFR 351.506 - Loan guarantees.

Science.gov (United States)

2010-04-01

... Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Identification and Measurement of Countervailable Subsidies § 351.506 Loan guarantees. (a) Benefit—(1) In general. In the case of a loan guarantee, a benefit exists to the extent that the total amount a firm pays for...

77 FR 58991 - State-Level Guarantee Fee Pricing

Science.gov (United States)

2012-09-25

... FEDERAL HOUSING FINANCE AGENCY [No. 2012-N-13] State-Level Guarantee Fee Pricing AGENCY: Federal... guarantee fee pricing by state. FHFA's proposal described here would adjust the upfront fees that the... final state-level guarantee fee pricing method, FHFA expects to direct the Enterprises to implement the...

13 CFR 107.1720 - Characteristics of SBA's guarantee.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Characteristics of SBA's guarantee. 107.1720 Section 107.1720 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS... Characteristics of SBA's guarantee. If SBA agrees to guarantee a Licensee's Debentures or Participating Securities...

REGIONAL RECIPROCAL GUARANTEE SOCIETIES IN VENEZUELA

Directory of Open Access Journals (Sweden)

Orlando J. Canelones

2014-11-01

Full Text Available This research aims to describe the operation of services offered by the Regional Mutual Guarantee Societies (SGRs in Venezuela, and to present synthetically, the rudiments for constitution, as well as the legal basis that must rule them, through conducting an executive summary of the Law of the National System of Reciprocal Guarantees for Small and Medium Business and the Promotion, Constitution and Functioning Rules of National Mutual Funds and Guarantees and SGRs.  The methodology used in this research is documentary, through a literature review and exploration that allowed inferences about the importance of Regional SGRs in Venezuela, as financing alternative

On QoS guarantee in MPLS network with software deadline awareness

Science.gov (United States)

Gao, Yu; Jin, Yaohui; Cheng, Hong; Yu, Yingdi; Sun, Weiqiang; Guo, Wei; Hu, Weisheng

2007-11-01

With the increasing number of internet users, more and more real-time services are added into the network, such as IPTV, online-video, Voice over IP, etc. As we know, throughput is a highly important performance criterion for scheduling algorithms of networks. Besides throughput, these growing real-time services are very sensitive to delay variance termed as jitter. Therefore, high performance scheduling algorithm should achieve good performance in terms of throughput, delay, jitter and fairness together. Scheduling algorithm with deadline-awareness employed in packet switching plays a key role in QoS guarantees. Although traditional hard-deadline can provide guarantee on in-node delay-deadline criteria, the end-to-end delay-deadline criteria cannot be guaranteed due to the characteristic of hard-deadline, while the delay-deadline guaranteed throughput is low. Thus, soft-deadline scheduling algorithm has been proposed. In this paper, we investigate and compare the classical hard-deadline and soft-deadline switching algorithm. A new scheme "Bonus System" is proposed in order to realize the idea of soft-deadline switching algorithm. Bonus System based on soft-deadline is compared with classical Early-Deadline First scheme based on hard-deadline, which shows that Bonus System has better performance in End-to-End deadline guarantee.

Legal Deposit of Electronic Publications

Directory of Open Access Journals (Sweden)

Burcu Umut Zan

2009-06-01

Full Text Available The most important and basic role of the deposition studies, which are the greatest contributions to the knowledge sharing, is to gather the artistic and philosophical works of a country and provide them for the use of future researchers. However, since early deposition studies were limited with printed publications, they do not involve the electronic publication types appearing with the development of information technology. This stems from the fact that the electronic publications require procedures different from those of the printed publications in terms of deposition steps because of their structures. Today, in order to guarantee that all registered cultural products, which are mostly produced and used in the electronic environment could be fully collected, electronic publications should also be covered by and regulated under legal deposit. This study analyzes the deposition of electronic publications, within the framework of their storage and protection, being put in the use of the users as well as the common approaches to deposition practices in the world parallel to the developments in the information technology. The related situation in Turkey was also evaluated.

Numerical study on increasing mass flow ratio by energy deposition of high frequency pulsed laser

International Nuclear Information System (INIS)

Wang Diankai; Hong Yanji; Li Qian

2013-01-01

The mass flow ratio (MFR) of air breathing ramjet inlet would be decreased, when the Mach number is lower than the designed value. High frequency pulsed laser energy was deposited upstream of the cowl lip to reflect the stream so as to increase the MFR. When the Mach number of the flow was 5.0, and the static pressure and temperature of the flow were 2 551.6 Pa and 116.7 K, respectively, two-dimensional non-stationary compressible RANS equations were solved with upwind format to study the mechanisms of increasing MFR by high frequency pulsed laser energy deposition. The laser deposition frequency was 100 kHz and the average power was 500 W. The crossing point of the first forebody oblique shock and extension line of cowl lip was selected as the expected point. Then the deposition position was optimized by searching near the expected point. The results indicate that with the optimization of laser energy deposition position, the MFR would be increased from 63% to 97%. The potential value of increasing MFR by high frequency pulsed laser energy deposition was proved. The method for selection of the energy deposition position was also presented. (authors)

Pricing unit-linked insurance with guaranteed benefit

Science.gov (United States)

Iqbal, M.; Novkaniza, F.; Novita, M.

2017-07-01

Unit-linked insurance is an investment-linked insurance, that is, the given benefit is the premium investment out-come. Recently, the most widely marketed insurance in the industry is unit-linked insurance with guaranteed benefit. With guaranteed benefit applied, the insurance benefits form is similar to the payoff form of European call option. Thereby, pricing European call option is involved in pricing unit-linked insurance with guaranteed benefit. The dynamics of investment outcome is assumed to follow stochastic interest rate. Hence, change of measure methods is used in pricing unit-linked insurance. The discount factor with stochastic interest rate needs to be modified as well to be zero coupon bond price. Eventually, the insurance premium is calculated by equivalence principle with guaranteed benefit and insurance period explicitly given.

NCA & Credit Guarantees

African Journals Online (AJOL)

stooppn

purposes of the National Credit Act; what the definition of a credit guarantee set out ...... Scholtz et al National Credit Act in para 8.2.4; Scott et al Law of Commerce ..... Eitelberg E "Autonomy of Documentary Credit Undertakings in South African.

Financial Management: Emergency Steel Loan Guarantee Program

National Research Council Canada - National Science Library

2001-01-01

In a February 1, 2001 letter, you expressed concerns about repayments of federally guaranteed loans by borrowers under the Emergency Steel Loan Guarantee Program and the effect of the program on the U.S. steel industry...

Asset securitization and rate of return: A study on letters of guarantee

Science.gov (United States)

Wu, Binghui

2018-01-01

Using the theory of asset securitization, we analyze the feasibility of the securitization of letters of guarantee in theory. In the process of constructing the model of rate of return of securities backed by letters of guarantee, we propose two indices: the risk probability of asset-backed securities and the loss rate of asset-backed securities to analyze the cash flow of securities. On the basis of no arbitrage principle, the expression of rate of return of securities backed by letters of guarantee is put forward. In order to study the relationship between the rate of return of securities and other influential factor in the model, a simulation experiment is designed. The experiment results show that (i) an increasing risk probability of cash flow or a short maturity date also make the return rate of securities increase and (ii) the return rate of securities is higher in economic boom than that in economic recession when other parameters remain unchanged.

The Canadian Nuclear Safety Commission's financial guarantee requirements

International Nuclear Information System (INIS)

Ferch, R.

2006-01-01

The Nuclear Safety and Control Act gives the Canadian Nuclear Safety Commission (CNSC) the legal authority to require licensees to provide financial guarantees in order to meet the purposes of the Act. CNSC policy and guidance with regard to financial guarantees is outlined, and the current status of financial guarantee requirements as applied to various CNSC licensees is described. (author)

The traceability of renewable energies: the guarantees of origin

International Nuclear Information System (INIS)

2017-03-01

The guarantee of origin has been initially designed by the European Union as a mechanism of support for renewable energies. It is an electronic document which allows an electric power provider to guarantee to its client the origin of the energy it sells him. This document presents the legal background of this guarantee, briefly describes the life cycle of this guarantee, proposes a brief discussion of recent legal evolutions, and briefly discusses its future

Incentive-compatible guaranteed renewable health insurance premiums.

Science.gov (United States)

Herring, Bradley; Pauly, Mark V

2006-05-01

Theoretical models of guaranteed renewable insurance display front-loaded premium schedules. Such schedules both cover lifetime total claims of low-risk and high-risk individuals and provide an incentive for those who remain low-risk to continue to purchase the policy. Questions have been raised of whether actual individual insurance markets in the US approximate the behavior predicted by these models, both because young consumers may not be able to "afford" front-loading and because insurers may behave strategically in ways that erode the value of protection against risk reclassification. In this paper, the optimal competitive age-based premium schedule for a benchmark guaranteed renewable health insurance policy is estimated using medical expenditure data. Several factors are shown to reduce the amount of front-loading necessary. Indeed, the resulting optimal premium path increases with age. Actual premium paths exhibited by purchasers of individual insurance are close to the optimal renewable schedule we estimate. Finally, consumer utility associated with the feature is examined.

78 FR 48135 - Information Collection; Guaranteed Farm Loan Program

Science.gov (United States)

2013-08-07

... Information Collection; Guaranteed Farm Loan Program AGENCY: Farm Service Agency, USDA. ACTION: Notice... revision of a currently approved information collection associated with the Guaranteed Farm Loan Program. This information collection is used to make and service loans guaranteed by FSA to eligible farmers and...

Financial guarantees and public debt in South Africa

Directory of Open Access Journals (Sweden)

Ogutu Miruka

2015-09-01

Full Text Available A few years since the worst of the Euro sovereign debt crisis, many nations, from Cyprus to Ireland, including South Africa are re-visiting their public debt management to avert or lessen the impact of similar such happenings in the future. There are a number of studies on risk assessments of fiscal sustainability; however, few focus on contingent liabilities and even fewer on financial guarantees. In South Africa, financial guarantees have consistently comprised just above or below 50% of all contingent liabilities since the early days of majoritarian rule. In lieu of this, the paper analyses the risks posed by financial guarantees to fiscal sustainability in South Africa. We estimate the effect of financial guarantees on public debt in South Africa via the Engle Granger and causality model with quarterly time series data obtained from the South African Reserve Bank (SARB as well as the National Treasury. The data covers the April 1997 to December 2011 period. All econometric methods were executed using the statistical software package E-Views 7. We found that no long run relationship exists between national net loan debt and financial guarantees in South Africa. The pass rate of financial guarantees significantly affects its present value. The pass rate of financial guarantees has a predicting ability in determining the present value of national net loan debt. These findings may be contrary to what would be expected in the case of South Africa considering that the country is managing the issuance of financial guarantees prudently and that at present levels, there is no need for a radical policy shift. The study therefore offers a lesson to similar merging economies on the good governance of contingent liabilities.

10 CFR 609.10 - Loan Guarantee Agreement.

Science.gov (United States)

2010-01-01

... accepted accounting principles and practices. The non-guaranteed portion (if any) of any Guaranteed... examination, to any pertinent books, documents, papers, and records of the Borrower, Eligible Lender or other... transferring Eligible Lender was performing these functions and transfer such functions to the new Eligible...

A Network-Attached Storage System Supporting Guaranteed QoS

Institute of Scientific and Technical Information of China (English)

KONG Hua-feng; YU Sheng-sheng; LU Hong-wei

2005-01-01

We propose a network-attached storage system that can support guaranteed Quality of Service (QoS), called POPNet Storage. The special policy of date access and disk scheduling is enable users to access files quickly and directly with guaranteed QoS in the POPNet Storage. The POPNet Storage implements a measurement-based admission control algorithm (PSMBAC) to determine whether to admit a new data access request stream and admit as many requests as possible while meeting the QoS guarantees to its clients. The data reconstruction algorithms in the POPNet Storage also put more emphasis on data availability and guaranteed QoS, thus it is designed to complete the data recovery as soon as possible and at the same time provide the guaranteed QoS for high-priority data access. The experiment results show that the POPNet Storage can provide more significant performance, reliability, and guaranteed QoS than conventional storage systems.

Security Guarantees and Nuclear Non-Proliferation

International Nuclear Information System (INIS)

Bruno Tertrais

2011-01-01

The purpose of this paper is to discuss the value of 'security guarantees', that is, positive security assurances that include a formal or informal defense commitment, in preventing nuclear proliferation. It demonstrates that such guarantees have proven to be a very effective instrument in preventing States from going nuclear. It would thus seem logical to reinforce or extend them. However, this path is fraught with obstacles and dilemmas

Security Guarantees and Nuclear Non-Proliferation

Energy Technology Data Exchange (ETDEWEB)

Bruno Tertrais

2011-07-01

The purpose of this paper is to discuss the value of 'security guarantees', that is, positive security assurances that include a formal or informal defense commitment, in preventing nuclear proliferation. It demonstrates that such guarantees have proven to be a very effective instrument in preventing States from going nuclear. It would thus seem logical to reinforce or extend them. However, this path is fraught with obstacles and dilemmas

Subretinal drusenoid deposits with increased autofluorescence in eyes with reticular pseudodrusen.

Science.gov (United States)

Lee, Mee Yon; Ham, Don-Il

2014-01-01

To characterize a variant type of drusenoid deposit with different imaging features in comparison to reticular pseudodrusen. Retrospective observational consecutive case series. Eyes showing atypical drusenoid lesions were sorted out from 257 eyes of 133 patients previously diagnosed as reticular pseudodrusen. Eyes were evaluated using color fundus photography, confocal scanning laser ophthalmoscopy, and spectral domain optical coherence tomography. A variant type of drusenoid deposits showing different imaging features from reticular pseudodrusen was found in 17 eyes of 12 patients (6.6%). The mean age of patients was 62.7 ± 11.6 years, and all patients were women. These deposits were observed as yellowish white, round to oval lesions on color photographs, located under the sensory retina and above the retinal pigment epithelium on spectral domain optical coherence tomography similar to reticular pseudodrusen. However, they were present in a smaller number as discrete lesions and showed increased autofluorescence. None of them were accompanied by late age-related macular degeneration. Subretinal drusenoid deposits are not homogeneous and can be classified into two types according to the fundus autofluorescence. Multimodal imaging tests are needed for the differential diagnosis of subretinal drusenoid deposits.

Maternal Docosahexaenoic Acid Increases Adiponectin and Normalizes IUGR-Induced Changes in Rat Adipose Deposition

Directory of Open Access Journals (Sweden)

Heidi N. Bagley

2013-01-01

Full Text Available Intrauterine growth restriction (IUGR predisposes to obesity and adipose dysfunction. We previously demonstrated IUGR-induced increased visceral adipose deposition and dysregulated expression of peroxisome proliferator activated receptor-γ2 (PPARγ2 in male adolescent rats, prior to the onset of obesity. In other studies, activation of PPARγ increases subcutaneous adiponectin expression and normalizes visceral adipose deposition. We hypothesized that maternal supplementation with docosahexaenoic acid (DHA, a PPARγ agonist, would normalize IUGR adipose deposition in association with increased PPARγ, adiponectin, and adiponectin receptor expression in subcutaneous adipose. To test these hypotheses, we used a well-characterized model of uteroplacental-insufficiency-(UPI- induced IUGR in the rat with maternal DHA supplementation. Our primary findings were that maternal DHA supplementation during rat pregnancy and lactation (1 normalizes IUGR-induced changes in adipose deposition and visceral PPARγ expression in male rats and (2 increases serum adiponectin, as well as adipose expression of adiponectin and adiponectin receptors in former IUGR rats. Our novel findings suggest that maternal DHA supplementation may normalize adipose dysfunction and promote adiponectin-induced improvements in metabolic function in IUGR.

Maternal docosahexaenoic acid increases adiponectin and normalizes IUGR-induced changes in rat adipose deposition.

Science.gov (United States)

Bagley, Heidi N; Wang, Yan; Campbell, Michael S; Yu, Xing; Lane, Robert H; Joss-Moore, Lisa A

2013-01-01

Intrauterine growth restriction (IUGR) predisposes to obesity and adipose dysfunction. We previously demonstrated IUGR-induced increased visceral adipose deposition and dysregulated expression of peroxisome proliferator activated receptor- γ 2 (PPAR γ 2) in male adolescent rats, prior to the onset of obesity. In other studies, activation of PPAR γ increases subcutaneous adiponectin expression and normalizes visceral adipose deposition. We hypothesized that maternal supplementation with docosahexaenoic acid (DHA), a PPAR γ agonist, would normalize IUGR adipose deposition in association with increased PPAR γ , adiponectin, and adiponectin receptor expression in subcutaneous adipose. To test these hypotheses, we used a well-characterized model of uteroplacental-insufficiency-(UPI-) induced IUGR in the rat with maternal DHA supplementation. Our primary findings were that maternal DHA supplementation during rat pregnancy and lactation (1) normalizes IUGR-induced changes in adipose deposition and visceral PPAR γ expression in male rats and (2) increases serum adiponectin, as well as adipose expression of adiponectin and adiponectin receptors in former IUGR rats. Our novel findings suggest that maternal DHA supplementation may normalize adipose dysfunction and promote adiponectin-induced improvements in metabolic function in IUGR.

42 CFR 417.937 - Loan and loan guarantee provisions.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Loan and loan guarantee provisions. 417.937 Section... HEALTH CARE PREPAYMENT PLANS Administration of Outstanding Loans and Loan Guarantees § 417.937 Loan and loan guarantee provisions. (a) Disbursement of loan proceeds. The principal amount of any loan made or...

Assume-Guarantee Abstraction Refinement Meets Hybrid Systems

Science.gov (United States)

Bogomolov, Sergiy; Frehse, Goran; Greitschus, Marius; Grosu, Radu; Pasareanu, Corina S.; Podelski, Andreas; Strump, Thomas

2014-01-01

Compositional verification techniques in the assume- guarantee style have been successfully applied to transition systems to efficiently reduce the search space by leveraging the compositional nature of the systems under consideration. We adapt these techniques to the domain of hybrid systems with affine dynamics. To build assumptions we introduce an abstraction based on location merging. We integrate the assume-guarantee style analysis with automatic abstraction refinement. We have implemented our approach in the symbolic hybrid model checker SpaceEx. The evaluation shows its practical potential. To the best of our knowledge, this is the first work combining assume-guarantee reasoning with automatic abstraction-refinement in the context of hybrid automata.

13 CFR 120.400 - Loan Guarantee Agreements.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Loan Guarantee Agreements. 120.400 Section 120.400 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Lenders § 120... specific proposed loan that a Lender may submit. The existence of a Loan Guarantee Agreement does not limit...

77 FR 38015 - Community Programs Guaranteed Loans

Science.gov (United States)

2012-06-26

... section. This is based upon the Agency's experience to date in financing this type of project and the... sections, in order to clarify the types of projects that are eligible for a Community Facilities Guaranteed... Program by limiting the risk to the guaranteed loan portfolio. RHS is seeking to prohibit the financing of...

46 CFR 390.7 - Deposits into the fund.

Science.gov (United States)

2010-10-01

... specified in Article 5(c) of this agreement attributable to the operation of agreement vessels, net proceeds... deposits will adversely affect its ability to operate its agreement vessels. In the event of a waiver, the... investment or management of the fund. (i) Federal ship mortgage guarantee or insurance. A fund may serve in...

CREDIT SYSTEM AND CREDIT GUARANTEE PROGRAMS

OpenAIRE

Turgay GECER

2012-01-01

Credit system is an integrated architecture consisted of financial information, credit rating, credit risk management, receivables and credit insurance systems, credit derivative markets and credit guarantee programs. The main purpose of the credit system is to provide the functioning of all credit channels and to make it easy to access of credit sources demanded by all of real and legal persons in any economic system. Credit guarantee program, the one of prominent elements of the credit syst...

What Guarantees Should Society Offer Its Youth?

Science.gov (United States)

Brooks, Chris

2014-01-01

Criticising the concept of a "youth guarantee" as it was understood by the OECD in the 1990s and recently again by the European Community, the author argues that just more schooling and training will not help, let alone guarantee a future for disadvantaged, unemployed young people. Rather any policy that wants to help youth to become…

"Financial Innovation and Risk Management: The Cross-Guarantee Solution"

OpenAIRE

Bert Ely

1995-01-01

The cross-guarantee concept, which is summarized below, will eliminate the regulatory moral hazard that electronic technology has greatly exacerbated in recent years. The paper concludes by outlining the many benefits cross-guarantees will bring to the financial system as well as the structural and international implications of using cross-guarantees to bring market-driven regulation to the financial services sector of the American economy.

Customer intentions to invoke service guarantees: Do excellence in service recovery, type of guarantee, and cultural orientation matter?

OpenAIRE

Van Vaerenbergh, Yves; De Keyser, Arne; Larivière, Bart

2014-01-01

Purpose – Many service providers feel confident about their service quality and thus offer service guarantees to their customers. Yet service failures are inevitable. As guarantees can only be invoked when customers report service failures, firms are given the opportunity to redress the original failure potentially influencing customer outcomes. The purpose of this paper is to provide the first empirical investigation of whether excellence in service recovery affects customers’ intentions to ...

On the Guarantee of the Realization of the Right to Education

Directory of Open Access Journals (Sweden)

Elena A. Kashtanova

2017-05-01

Full Text Available The article reveals the issues of the essence and content of the guarantee of the realization of the right to education, the system of guarantees for the implementation of constitutional and legal principles and norms, including those that consolidate the system of rights and freedoms of human and citizen. The Author examines the functions of guarantee (stimulating, law enforcement and law enforcement, analyzes types of guarantees – guarantees related to the very right to education and quality of education.​

Implementation of a financial guarantee policy at the CNSC

International Nuclear Information System (INIS)

Barker, R.

2011-01-01

The Canadian Nuclear Safety Commission (CNSC) was established in 2000 under the Nuclear Safety and Control Act (NSCA) to replace the Atomic Energy Control Board (AECB). Prior to the coming in force of the NSCA, financial guarantees associated with licensed activities were not prescribed in the Atomic Energy Control Act or its regulations. Under the NSCA, the Commission Tribunal 'the Commission' was given authority to impose conditions in licences requiring financial guarantees from licensees. Other provisions of the NSCA provided information on the application of financial guarantees and for refunds when decommissioning obligations had been met. Since 2000, the application of financial guarantees has been primarily focussed on licences issued pursuant to the Class I Nuclear Facilities Regulations and the Uranium Mines and Mills Regulations. This was to assure that the requirements for financial guarantees were initially directed at the high risk, complex facilities licensed by the CNSC. However, all licensees have not yet been required to provide a financial guarantee for all licensed facilities, activities or licence types. Additionally, CNSC expectations in relation to when financial guarantees, associated decommissioning plans and cost estimates need to be reviewed, updated and submitted, and what they should entail have been evolving, indicating a need for a clear CNSC policy on the subject. Consequently, the CNSC is proceeding with the development of a financial guarantee policy and implementation plan to assure that generators of nuclear waste will have the financial resources available to decommission nuclear facilities, operations and devices and that this activity will not fall to government as a future liability. This program will require approval by the Commission, planned for 2012. This paper will further describe this policy and its possible outcomes. (author)

13 CFR 120.613 - Secondary Participation Guarantee Agreement.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Secondary Participation Guarantee Agreement. 120.613 Section 120.613 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Secondary Market Certificates § 120.613 Secondary Participation Guarantee Agreement. When a Lender...

48 CFR 52.247-60 - Guaranteed Shipping Characteristics.

Science.gov (United States)

2010-10-01

... Characteristics. 52.247-60 Section 52.247-60 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION....247-60 Guaranteed Shipping Characteristics. As prescribed in 47.305-16(b)(1), insert the following clause: Guaranteed Shipping Characteristics (DEC 1989) (a) The offeror is requested to complete...

13 CFR 120.621 - SBA guarantee of an Individual Certificate.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false SBA guarantee of an Individual Certificate. 120.621 Section 120.621 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Secondary Market The Sba Guarantee of A Certificate § 120.621 SBA guarantee of an Individual...

Economic valuation of a toll road concession with traffic guarantees and the abandonment option

Directory of Open Access Journals (Sweden)

Frances Fischberg Blank

2016-03-01

Full Text Available Abstract Governments worldwide have been encouraging private participation in transportation infrastructure. To increase the feasibility of a project, public-private partnership (PPP may include guarantees or other support to reduce the risks for private investors. It is necessary to value these opportunities under a real options framework and thereby analyze the project's economic feasibility and risk allocation. However, within this structure, sponsors have an implicit option to abandon the project that should be simultaneously valued. Thus, this article proposes a hypothetical toll road concession in Brazil with a minimum traffic guarantee, a maximum traffic ceiling, and an implicit abandonment option. Different combinations of the minimum and maximum levels are presented, resulting in very high or even negative value added to the net present value (NPV. The abandonment option impacts the level of guarantee to be given. Governments should calibrate an optimal level of guarantees to avoid unnecessarily high costs, protect the returns of the sponsor, and lower the probability of abandonment.

13 CFR 120.620 - SBA guarantee of a Pool Certificate.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false SBA guarantee of a Pool Certificate. 120.620 Section 120.620 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Secondary Market The Sba Guarantee of A Certificate § 120.620 SBA guarantee of a Pool Certificate...

7 CFR 4279.149 - Personal and corporate guarantee.

Science.gov (United States)

2010-01-01

... guarantees are part of the collateral for the loan, but are not considered in determining whether a loan is... documents to the Agency's satisfaction that collateral, equity, cashflow, and profitability indicate an... guarantee form. When warranted by an Agency assessment of potential financial risk, Agency approved...

12 CFR 370.4 - Transaction Account Guarantee Program.

Science.gov (United States)

2010-01-01

... GENERAL POLICY TEMPORARY LIQUIDITY GUARANTEE PROGRAM § 370.4 Transaction Account Guarantee Program. (a) In addition to the coverage afforded to depositors under 12 CFR Part 330, a depositor's funds in a noninterest... determining whether funds are in a noninterest-bearing transaction account for purposes of this section, the...

Monitoring Assumptions in Assume-Guarantee Contracts

Directory of Open Access Journals (Sweden)

Oleg Sokolsky

2016-05-01

Full Text Available Pre-deployment verification of software components with respect to behavioral specifications in the assume-guarantee form does not, in general, guarantee absence of errors at run time. This is because assumptions about the environment cannot be discharged until the environment is fixed. An intuitive approach is to complement pre-deployment verification of guarantees, up to the assumptions, with post-deployment monitoring of environment behavior to check that the assumptions are satisfied at run time. Such a monitor is typically implemented by instrumenting the application code of the component. An additional challenge for the monitoring step is that environment behaviors are typically obtained through an I/O library, which may alter the component's view of the input format. This transformation requires us to introduce a second pre-deployment verification step to ensure that alarms raised by the monitor would indeed correspond to violations of the environment assumptions. In this paper, we describe an approach for constructing monitors and verifying them against the component assumption. We also discuss limitations of instrumentation-based monitoring and potential ways to overcome it.

Corrosion processes of physical vapor deposition-coated metallic implants.

Science.gov (United States)

Antunes, Renato Altobelli; de Oliveira, Mara Cristina Lopes

2009-01-01

Protecting metallic implants from the harsh environment of physiological fluids is essential to guaranteeing successful long-term use in a patient's body. Chemical degradation may lead to the failure of an implant device in two different ways. First, metal ions may cause inflammatory reactions in the tissues surrounding the implant and, in extreme cases, these reactions may inflict acute pain on the patient and lead to loosening of the device. Therefore, increasing wear strength is beneficial to the performance of the metallic implant. Second, localized corrosion processes contribute to the nucleation of fatigue cracks, and corrosion fatigue is the main reason for the mechanical failure of metallic implants. Common biomedical alloys such as stainless steel, cobalt-chrome alloys, and titanium alloys are prone to at least one of these problems. Vapor-deposited hard coatings act directly to improve corrosion, wear, and fatigue resistances of metallic materials. The effectiveness of the corrosion protection is strongly related to the structure of the physical vapor deposition layer. The aim of this paper is to present a comprehensive review of the correlation between the structure of physical vapor deposition layers and the corrosion properties of metallic implants.

14 CFR 1300.23 - Participation in guaranteed loans.

Science.gov (United States)

2010-01-01

... lender may distribute the risk of a portion of a loan guaranteed under the program by sale of... transferred in whole or in part; (2) The lender remains solely responsible for the administration of the loan... loans guaranteed under the program: (1) Eligible lenders; (2) Private investment funds and insurance...

Switching Fuzzy Guaranteed Cost Control for Nonlinear Networked Control Systems

Directory of Open Access Journals (Sweden)

Linqin Cai

2014-01-01

Full Text Available This paper deals with the problem of guaranteed cost control for a class of nonlinear networked control systems (NCSs with time-varying delay. A guaranteed cost controller design method is proposed to achieve the desired control performance based on the switched T-S fuzzy model. The switching mechanism is introduced to handle the uncertainties of NCSs. Based on Lyapunov functional approach, some sufficient conditions for the existence of state feedback robust guaranteed cost controller are presented. Simulation results show that the proposed method is effective to guarantee system’s global asymptotic stability and quality of service (QoS.

An Active Queue Management for QoS Guarantee of the High Priority Service Class

Science.gov (United States)

Kim, Hyun Jong; Shim, Jae Chan; Kim, Hwa-Suk; Cho, Kee Seong; Choi, Seong Gon

In this paper, we propose the active queue management mechanism (Active-WRED) for guaranteeing the quality of the high priority service class (VoIP or IPTV) in the multi-class traffic service environment. In the congestion situation, this mechanism increases the drop probability of the low priority traffic and reduces the drop probability of the high priority traffic; therefore it can guarantee the quality of the high priority service class from the poor quality by the packet loss.

The Influence of Strategic Alternatives on the Increasing Level Value of the Term Deposits

Directory of Open Access Journals (Sweden)

Mirela Catalina Turkes

2015-03-01

Full Text Available This article analyses the influence of the strategic alternative on the value level increase of the term deposits attracted from the Romanian’s population households, during the period 2012 – Q1/2015, depending on the change of the standards related to deposits granting in RON, EURO and other currencies, but also depending on the aggregate volume of deposits demand at a national level. One-way ANOVA represents the ideal model to emphasize that the average of the term deposits attracted from the population’s households during the last four years is influenced by the strategic alternative used by the credit institutions. The results of this analysis underlined the fact that there is a strong link between the strategic alternative adopted by the banks and the change of the value level of the term deposits intended for the population. The strategies to attract RON deposits proved to be more efficient compared to the strategies adopted by the banks for other currencies.

7 CFR 2201.28 - Participation in guaranteed Loans.

Science.gov (United States)

2010-01-01

... Participation in guaranteed Loans. (a) Subject to paragraphs (b), (c) and (d) of this section, a Lender may distribute the risk of a portion of a Loan guaranteed under the Program by sale of participations therein if... in part as a result of the sale of such participations; (2) The Lender remains solely responsible for...

PRICING AND ASSESSING UNIT-LINKED INSURANCE CONTRACTS WITH INVESTMENT GUARANTEES

Directory of Open Access Journals (Sweden)

Ciumas Cristina

2014-07-01

Full Text Available One of the most interesting life insurance products to have emerged in recent years in the Romanian insurance market has been the unit-linked contract. Unit-linked insurance products are life insurance policies with investment component. A unit-linked life insurance has two important components: protection and investment. The protection component refers to the insured sum in case of the occurrence of insured risks and the investment component refers to the policyholders’ account that represents the present value of the units from the chosen investment funds. Due to the financial instability caused by the Global Crisis and the amplification of market competitiveness, insurers from international markets have started to incorporate guarantees in unit-linked products. So a unit- linked life insurance policy with an asset value guarantee is an insurance policy whose benefit payable on death or at maturity consists of the greater of some guaranteed amount and the value of the units from the investment funds. One of the most challenging issues concerns the pricing of minimum death benefit and maturity benefit guarantees and the establishing of proper reserves for these guarantees. Insurers granting guarantees of this type must estimate the cost and include the cost in the premium. An important component of the activity carried out by the insurance companies is the investment of the premiums paid by policyholders in various types of assets, in order to obtain higher yields than those guaranteed by the insurance contracts, while providing the necessary liquidity for the payment of insurance claims in case of occurrence of the assumed risks. So the guaranteed benefits can be broadly matched or immunized with various types of financial assets, especially with fixed-interest instruments. According to Romanian legislation which regulates the unit-linked life insurance market, unit-linked life insurance contracts pass most of the investment risk to the

Basic Principles of Financial Planning in Ex-ante Deposit Insurance Schemes

Directory of Open Access Journals (Sweden)

Đurđica Ognjenović

2006-12-01

Full Text Available The paper explores main principles of financial planning in ex-ante deposit insurance schemes from a theoretical perspective and in terms of the EU Directive on deposit- guarantee schemes. Further on, the paper assesses how these principles and standards are used in financial planning in deposit insurance schemes around the world for annual budgeting, strategic planning and optimalization of available financial resources. After reviewing available references and different practices, the conclusion is that there are no clear internationally accepted principles for deposit insurers’ financial planning, except some broad and general guidelines. Practices in the industry differ significantly. Given the fact that deposit insurance is in fact a monopolistic business, lack of clear principles and lack of proper financial planning may lead to inadequacy of ex-ante funds and negligence on the side of the management of deposit insurance schemes.

Fair premium rate of the deposit insurance system based on banks' creditworthiness

OpenAIRE

Yoshino, Naoyuki; Taghizadeh-Hesary, Farhad; Nili, Farhad

2017-01-01

Purpose: Deposit insurance is a key element in modern banking, as it guarantees the financial safety of deposits at depository financial institutions. It is necessary to have at least a dual fair premium rate system based on the creditworthiness of financial institutions, as considering a singular premium system for all banks will have a moral hazard. In this paper, we develop a theoretical as well as an empirical model for calculating dual fair premium rates. Design/methodology/approach: Our...

Strategic design of cost savings guarantee in energy performance contracting under uncertainty

International Nuclear Information System (INIS)

Deng, Qianli; Jiang, Xianglin; Cui, Qingbin; Zhang, Limao

2015-01-01

Highlights: • A methodology is proposed to assist Energy Service Companies to maintain competitiveness in winning bids. • Uncertainties within the energy cost savings are modeled stochastically using the Monte-Carlo simulation. • A strategic energy savings guarantee design curve is derived, where all points return as appropriate guarantees. • A campus case is presented to demonstrate the applicability for finding appropriate guaranteed savings value. - Abstract: Among the key barriers to profit in Energy Performance Contracting (EPC) are uncertainties about attaining the realized energy cost savings and potential disputes over the guaranteed cost savings. In this paper, a methodology has been proposed to assist the Energy Service Company (ESCO): (1) to evaluate the risk threshold if the guarantee has already been made, and (2) to determine the guarantee design, if the guarantee has not been made yet, that not only promises the ESCO’s profitability from EPC but also maintains its competitiveness to win the bid. Uncertainties within the energy cost savings are modeled stochastically using Monte-Carlo simulation, taking both the energy price fluctuation and the facility performance variability into account. Based on that, a strategic energy savings guarantee design curve is derived, that all the points on it would return as appropriate guarantees. Finally, a campus case is presented to demonstrate the applicability for finding the appropriate guaranteed savings value. This method is also worth popularizing in similar performance-based projects

Response of Sphagnum mosses to increased CO2 concentration and nitrogen deposition

International Nuclear Information System (INIS)

Jauhiainen, J.

1998-01-01

The main objective of this work was to study the effects of different CO 2 concentration and N deposition rates on Sphagna adapted to grow along a nutrient availability gradient (i.e. ombrotrophy-mesotrophy-eutrophy). The study investigated: (i) the effects of various longterm CO 2 concentrations on the rate of net photosynthesis in Sphagna, (ii) the effects of the CO 2 and N treatments on the moss density, shoot dry masses, length increment and dry mass production in Sphagna, (iii) the concentrations of the major nutrients in Sphagna after prolonged exposure to the CO 2 and N treatments, and (iv) species dependent differences in potential NH 4 + and NO 3 - uptake rates. The internal nutrient concentration of the capitulum and the production of biomass were effected less by the elevated CO 2 concentrations because the availability of N was a controlling factor. In addition responses to the N treatments were related to ecological differences between the Sphagna species. Species with a high tolerance of N availability were able to acclimatise to the increased N deposition rates. The data suggests a high nutrient status is less significant than the adaptation of the Sphagna to their ecological niche (e.g. low tolerance of meso-eutrophic S. warnstorfii to high N deposition rate). At the highest N deposition rate the ombrotrophic S. fuscum had the highest increase in tissue N concentration among the Sphagna studied. S. fuscum almost died at the highest N deposition rate because of the damaging effects of N to the plant's metabolism. Ombrotrophic hummock species such as S. fuscum, were also found to have the highest potential N uptake rate (on density of dry mass basis) compared to lawn species. The rate of net photosynthesis was initially increased with elevated CO 2 concentrations, but photosynthesis was down regulated with prolonged exposure to CO 2 . The water use efficiency in Sphagna appeared not to be coupled with exposure to the long-term CO 2 concentration. The

76 FR 30904 - Rural Utilities Service Telecommunications Loan and Loan Guarantee Program

Science.gov (United States)

2011-05-27

..., this new approach will give our customers increased flexibility to find and deploy technology that... DEPARTMENT OF AGRICULTURE Rural Utilities Service Rural Utilities Service Telecommunications Loan and Loan Guarantee Program AGENCY: Rural Utilities Service, USDA. ACTION: Notice of elimination of the...

Investment Guarantees in the South African Life Insurance Industry ...

African Journals Online (AJOL)

This paper explores the risks faced by South African life insurance companies arising from the provision of investment guarantees in products sold. The current thinking and practice of the larger South African life insurance companies regarding investment guarantees is set out following their responses to a survey.

Increased Arctic Deposition of Persistent Compounds as a Result of the Montreal Protocol

Science.gov (United States)

Young, C.; Pickard, H. M.; De Silva, A. O.; Spencer, C.; Criscitiello, A. S.; Muir, D.; Sharp, M. J.

2017-12-01

Perfluorocarboxylic acids (PFCAs) are among the diverse groups of compounds characterized as persistent organic pollutants. They are toxic, resistant to environmental degradation, and adversely impact human and environmental health. PFCAs with four or fewer carbons, short-chain PFCAs (scPFCAs), are of particular interest because of their increasing levels in the environment, toxicity to plants, and potential for accumulation in some aquatic ecosystems, making them an emerging environmental concern. A minor source of scPFCAs to the Arctic has been shown to be atmospheric transformation of fluoropolymer precursors, followed by deposition. Additional potential sources of scPFCAs to the Arctic are chlorofluorocarbon (CFC)-replacement compounds. Through analysis of an ice core from the Canadian High Arctic, we show that Montreal Protocol-mandated introduction of CFC-replacement compounds for the heat-transfer industry has led to increasing inputs of these scPFCAs to the remote environment. Flux measurements for scPFCAs as a class of contaminants have only been reported in a couple studies to date. Here, we provide the first multi-decadal temporal record of scPFCA deposition, demonstrating a dramatic increase in deposition resulting from emission of CFC-replacements. These results bring to the forefront a need for a holistic approach to environmental risk assessment that considers impacts of replacement substances and degradation products.

Stand alone photovoltaic systems: guarantee of results

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

This study aims to provide a guarantee of results for system performance for users of stand-alone photovoltaic (PV) systems, which have no back-up generator. The appropriate main performance criterion for PV systems is that a specified load is supplied with power either continuously or intermittently whenever the load requires power. A methodology to evaluate the power availability of stand-alone PV systems has been developed as part of the project, which encompasses power losses due to weather variations. The guarantee of results produced allows users to compare system designs from different manufacturers. (UK)

The effect of increased temperature and nitrogen deposition on decomposition in bogs

NARCIS (Netherlands)

Breeuwer, A.J.G.; Heijmans, M.M.P.D.; Robroek, B.J.M.; Limpens, J.; Berendse, F.

2008-01-01

Despite their low primary production, ombrotrophic peatlands have a considerable potential to store atmospheric carbon as a result of their extremely low litter decomposition rates. Projected changes in temperature and nitrogen (N) deposition may increase decomposition rates by their positive

Self-guaranteed measurement-based quantum computation

Science.gov (United States)

Hayashi, Masahito; Hajdušek, Michal

2018-05-01

In order to guarantee the output of a quantum computation, we usually assume that the component devices are trusted. However, when the total computation process is large, it is not easy to guarantee the whole system when we have scaling effects, unexpected noise, or unaccounted for correlations between several subsystems. If we do not trust the measurement basis or the prepared entangled state, we do need to be worried about such uncertainties. To this end, we propose a self-guaranteed protocol for verification of quantum computation under the scheme of measurement-based quantum computation where no prior-trusted devices (measurement basis or entangled state) are needed. The approach we present enables the implementation of verifiable quantum computation using the measurement-based model in the context of a particular instance of delegated quantum computation where the server prepares the initial computational resource and sends it to the client, who drives the computation by single-qubit measurements. Applying self-testing procedures, we are able to verify the initial resource as well as the operation of the quantum devices and hence the computation itself. The overhead of our protocol scales with the size of the initial resource state to the power of 4 times the natural logarithm of the initial state's size.

22 CFR 231.05 - Non-impairment of the Guarantee.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Non-impairment of the Guarantee. 231.05 Section 231.05 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ARAB REPUBLIC OF EGYPT LOAN GUARANTEES ISSUED UNDER THE EMERGENCY WARTIME SUPPLEMENTAL APPROPRIATIONS ACT OF 2003, PUBLIC LAW 108-11-STANDARD...

7 CFR 1493.430 - Application for a payment guarantee.

Science.gov (United States)

2010-01-01

... (includes upward loading tolerance, if any); (12) Guaranteed value; (13) Guarantee fee; (14) The term length... (including packaging, if any); (8) Mean quantity, contract loading tolerance and, if the exporter chooses, a request for CCC to reserve coverage up to the maximum quantity permitted by the contract loading tolerance...

76 FR 31217 - Single Family Housing Guaranteed Loan Program

Science.gov (United States)

2011-05-31

... Farm Service Agency 7 CFR Part 1980 RIN 0575-AC83 Single Family Housing Guaranteed Loan Program... the Rural Housing Service (RHS) Section 502 Single Family Housing Guaranteed Loan Program (SFHGLP) by eliminating the lender's published Department of Veterans Affairs (VA) rate for first mortgage loans with no...

7 CFR 1738.30 - Rural broadband access loans and loan guarantees.

Science.gov (United States)

2010-01-01

... interest at a rate set by the lender consistent with the current applicable market rate for a loan of... Derivative or any Guaranteed-Amount Debt Derivative; or (B) Any holder of the Guaranteed Loan Note or any Guaranteed Loan Portion Note or any Derivative, as the case may be, having a claim to payments on the...

Facilitating working mothers' ability to breastfeed: global trends in guaranteeing breastfeeding breaks at work, 1995-2014.

Science.gov (United States)

Atabay, Efe; Moreno, Gonzalo; Nandi, Arijit; Kranz, Gabriella; Vincent, Ilona; Assi, Tina-Marie; Winfrey, Elise Marie Vaughan; Earle, Alison; Raub, Amy; Heymann, S Jody

2015-02-01

Mothers who work away from home tend to stop breastfeeding earlier than their nonworking counterparts due to workplace barriers. Barriers to breastfeeding discriminate against women and may lead to inequities in children's health outcomes. Guaranteeing paid breastfeeding breaks at work is 1 mechanism that can improve mothers' opportunity to breastfeed in the workplace. This study aimed to assess the trends in the share of countries guaranteeing breastfeeding breaks in the workplace and paid maternal leave that lasts until the infant is 6 months old (the World Health Organization recommended duration for exclusive breastfeeding), between 1995 and 2014. Legislation and secondary source data were collected and reviewed for 193 United Nations member states. Legislation was analyzed for content on breastfeeding breaks and maternal leave guarantees. Fifty-one countries (26.7%) in 2014 did not guarantee breastfeeding breaks in any form and 4 countries provided only unpaid breaks or breaks that did not cover the first 6 months of life; since 1995, around 15 countries (10.2%) legislated for such a policy. In 2014, out of 55 countries that did not guarantee paid breastfeeding breaks for the first 6 months after birth, 7 countries guaranteed paid maternal leave for the same duration; 48 countries (25.1%) provided neither paid maternal leave nor paid breastfeeding breaks. Progress in the number of countries guaranteeing breastfeeding breaks at work is modest. Adopting measures to facilitate breastfeeding at work can be a critical opportunity for countries to increase breastfeeding rates among the growing number of women in the labor force. © The Author(s) 2014.

Corporate Bond Guarantees and The Value of Financial Flexibility

NARCIS (Netherlands)

Altieri, M.; Massa, M; Manconi, A

2016-01-01

We examine the effects of the decision of parent companies to guarantee bonds issued by their subsidiaries. The market value of the parent firm’s outstanding bonds drops five times more when it issues a guarantee for subsidiary debt than when it issues a new bond in its own name. This effect is

78 FR 79253 - CCC Export Credit Guarantee (GSM-102) Program and Facility Guarantee Program (FGP)

Science.gov (United States)

2013-12-27

... been worked out in advance of the exporter's application for the payment guarantee. Foreign Financial... country of domicile must provide financial statements in accordance with prevailing accounting standards... smaller U.S. exporters. Changes are also intended to improve CCC's financial management of the program...

The structure and economic significance of government guarantees in Croatia and the European Union

Directory of Open Access Journals (Sweden)

Marko Primorac

2016-03-01

Full Text Available In the aftermath of the financial crisis, when countries are facing difficulties in raising the amounts of revenue needed to cover the expenditure side of the budget, fiscal risks can pose a significant threat to the sustainability of public finance. This became particularly evident in the case of public enterprises and their liabilities, which often increased public debt because of difficulties in meeting their financial obligations. The aim of this paper is to evaluate fiscal risks from government guarantees in Croatia and the European Union in general. Moreover, the paper aims to analyse the dynamics of the value and structure of government guarantees in Croatia in the period from 2009 to first half of 2015. Particular emphasis is placed on the impact of government guarantees on direct public debt in the context of methodological changes in the registration of public debt.

The Risk Management of Minimum Return Guarantees

Directory of Open Access Journals (Sweden)

Antje Mahayni

2008-05-01

Full Text Available Contracts paying a guaranteed minimum rate of return and a fraction of a positive excess rate, which is specified relative to a benchmark portfolio, are closely related to unit-linked life-insurance products and can be considered as alternatives to direct investment in the underlying benchmark. They contain an embedded power option, and the key issue is the tractable and realistic hedging of this option, in order to rigorously justify valuation by arbitrage arguments and prevent the guarantees from becoming uncontrollable liabilities to the issuer. We show how to determine the contract parameters conservatively and implement robust risk-management strategies.

Doubts raised on the validity of construction and payment guarantees

African Journals Online (AJOL)

A construction company had been liquidated and the employer had called up the guarantee .... Due to the small size of the target populations in both the quantitative and qualitative ..... contingent liability that remains in terms of the guarantee.

Effects of Increased Nitrogen Deposition and Rotation Length on Long-Term Productivity of Cunninghamia lanceolata Plantation in Southern China

Science.gov (United States)

Zhao, Meifang; Xiang, Wenhua; Tian, Dalun; Deng, Xiangwen; Huang, Zhihong; Zhou, Xiaolu; Peng, Changhui

2013-01-01

Cunninghamia lanceolata (Lamb.) Hook. has been widely planted in subtropical China to meet increasing timber demands, leading to short-rotation practices that deplete soil nutrients. However, increased nitrogen (N) deposition offsets soil N depletion. While long-term experimental data investigating the coupled effects related to short rotation practices and increasing N deposition are scarce, applying model simulations may yield insights. In this study, the CenW3.1 model was validated and parameterized using data from pure C. lanceolata plantations. The model was then used to simulate various changes in long-term productivity. Results indicated that responses of productivity of C. lanceolata plantation to increased N deposition were more related to stand age than N addition, depending on the proportion and age of growing forests. Our results have also shown a rapid peak in growth and N dynamics. The peak is reached sooner and is higher under higher level of N deposition. Short rotation lengths had a greater effect on productivity and N dynamics than high N deposition levels. Productivity and N dynamics decreased as the rotation length decreased. Total productivity levels suggest that a 30-year rotation length maximizes productivity at the 4.9 kg N ha−1 year−1 deposition level. For a specific rotation length, higher N deposition levels resulted in greater overall ecosystem C and N storage, but this positive correlation tendency gradually slowed down with increasing N deposition levels. More pronounced differences in N deposition levels occurred as rotation length decreased. To sustain C. lanceolata plantation productivity without offsite detrimental N effects, the appropriate rotation length is about 20–30 years for N deposition levels below 50 kg N ha−1 year−1 and about 15–20 years for N deposition levels above 50 kg N ha−1 year−1. These results highlight the importance of assessing N effects on carbon management and the long-term productivity of

Community oral health literacy: improving use of oral-health care guarantee in children aged 6.

Directory of Open Access Journals (Sweden)

Marco Cornejo-Ovalle

2013-08-01

Full Text Available The assessment of comprehensive oral health care for children aged 6 (GES-6years showed low utilization of this guarantee, with lower use for children from municipal public schools. The empowerment and health literacy of parents improve their role as oral-health promoters for their children. Objective: To implement and to assess a strategy of empowerment and health literacy of the community about their guaranteed health rights to increase the use of GES-6years. Methods: A mixed design. Using qualitative methodology we will design a communication tool, culturally and socially appropriate to be sent to the beneficiary community of this guarantee. Using a nonrandomized community trial, this instrument designed to empower and improve oral health literacy on GES-6 guarantee, will be sent as personalized letter (intervention signed by the mayor of the municipality with a message aimed to children beneficiaries for GES -6years and another addressed to their parents/guardians. Schools would be selected from clusters (communes of the two regions selected for convenience. Communes will be randomly selected amog those whose authorities agree to participate, and will be selected as for intervention or control. Data analysis will assess the differences in the prevalence of use of this guarantee among children from municipal schools belonging to the intervention or control arm.

Waiting time guarantee - an update

DEFF Research Database (Denmark)

Socha, Karolina; Bech, Mickael

2008-01-01

The rule of extended free choice of hospital, in force since 2002, provides patients with an option to choose a private hospital if the public system is unable to provide a treatment within the guaranteed waiting time of one month. In June 2008 the Government declared in their yearly budget agree...

Public initiatives to support entrepreneurs: Credit guarantees versus co-funding

NARCIS (Netherlands)

Arping, S.; Lóránth, G.; Morrison, A.D.

2008-01-01

We analyze state-sponsored credit guarantees in a setting where entrepreneurs are capital-constrained and subject to moral hazard. In our model, guarantees can raise welfare because they reduce the cost of capital faced by entrepreneurs, and so potentially enhance entrepreneurial effort incentives.

42 CFR 57.1514 - Loan guarantee and interest subsidy agreements.

Science.gov (United States)

2010-10-01

... GRANTS GRANTS FOR CONSTRUCTION OF TEACHING FACILITIES, EDUCATIONAL IMPROVEMENTS, SCHOLARSHIPS AND STUDENT LOANS Loan Guarantees and Interest Subsidies to Assist in Construction of Teaching Facilities for Health Profession Personnel § 57.1514 Loan guarantee and interest subsidy agreements. For each application for a...

Building Trust in a Guarantee Fund in a Challenging Institutional Environment

Directory of Open Access Journals (Sweden)

Luciano Quinto Lanz

2017-09-01

Full Text Available Difficult access to credit is a major obstacle to micro, small and medium-sized enterprises (MSMEs survival, especially in emerging countries, affecting their competitiveness. Lack of guarantees is a main reason why banks do not lend to MSMEs. Guarantee schemes provide partial credit guarantees, but often fail to win trust of banks and enterprises. This study analyzes the process of building trust between the Fundo Garantidor para Investimentos (Investment Guarantee Fund, FGI, created in 2009, and banks in Brazil. This trust was hampered by the failure of public guarantee funds created in the 1990’s. This created a challenging institutional environment to the new fund. The methodology employed was a case study, based on a qualitative approach with document analysis, semi-structured interviews and descriptive statistics. The analysis used models for building and repairing trust in inter-organizational relations and international benchmark for governance and effectiveness of guarantee schemes. The analysis showed that the FGI used other emerging countries and developed countries experience to construct adequate governance and succeeded in establishing trust with the banks. The results show that by 2017, 26 banks contract more than 32,000 operations worth 1.9 billion dollars, with additionalities comparable to the international benchmark.

Guaranteed Cost Finite-Time Control of Discrete-Time Positive Impulsive Switched Systems

Directory of Open Access Journals (Sweden)

Leipo Liu

2018-01-01

Full Text Available This paper considers the guaranteed cost finite-time boundedness of discrete-time positive impulsive switched systems. Firstly, the definition of guaranteed cost finite-time boundedness is introduced. By using the multiple linear copositive Lyapunov function (MLCLF and average dwell time (ADT approach, a state feedback controller is designed and sufficient conditions are obtained to guarantee that the corresponding closed-loop system is guaranteed cost finite-time boundedness (GCFTB. Such conditions can be solved by linear programming. Finally, a numerical example is provided to show the effectiveness of the proposed method.

Guaranteed cost control of time-delay chaotic systems

International Nuclear Information System (INIS)

Park, Ju H.; Kwon, O.M.

2006-01-01

This article studies a guaranteed cost control problem for a class of time-delay chaotic systems. Attention is focused on the design of memory state feedback controllers such that the resulting closed-loop system is asymptotically stable and an adequate level of performance is also guaranteed. Using the Lyapunov method and LMI (linear matrix inequality) framework, two criteria for the existence of the controller are derived in terms of LMIs. A numerical example is given to illustrate the proposed method

Traffic Scheduling in WDM Passive Optical Network with Delay Guarantee

Institute of Scientific and Technical Information of China (English)

无

2005-01-01

WDM passive optical network becomes more favorable as the required bandwidth increases, but currently few media access control algorithms adapted to WDM access network. This paper presented a new scheduling algorithm for bandwidth sharing in WDM passive optical networks, which provides per-flow delay guarantee and supports variable-length packets scheduling. Through theoretical analysis and simulation, the end-to-end delay bound and throughput fairness of the algorithm was demonstrated.

16 CFR 239.2 - Disclosures in warranty or guarantee advertising.

Science.gov (United States)

2010-01-01

... warranty coverage. These examples are for both print and broadcast advertising. These examples are... advertising. 239.2 Section 239.2 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE ADVERTISING OF WARRANTIES AND GUARANTEES § 239.2 Disclosures in warranty or guarantee...

Financial guarantee for decommissioning and nuclear waste management activities at OPG

International Nuclear Information System (INIS)

Van den Hengel, J.

2006-01-01

This paper provides an overview on the establishment and maintenance of a financial guarantee for decommissioning and nuclear waste management activities at Ontario Power Generation (OPG) in accordance with CNSC requirements. The process and timelines are documented leading to the establishment of the guarantee effective July 31, 2003. Reference plans, cost estimates, funding mechanisms and reporting mechanisms are summarized. The renewal process projected at the end of the 5-year initial financial guarantee period is also included. (author)

Several Guaranteed Descent Conjugate Gradient Methods for Unconstrained Optimization

Directory of Open Access Journals (Sweden)

San-Yang Liu

2014-01-01

Full Text Available This paper investigates a general form of guaranteed descent conjugate gradient methods which satisfies the descent condition gkTdk≤-1-1/4θkgk2  θk>1/4 and which is strongly convergent whenever the weak Wolfe line search is fulfilled. Moreover, we present several specific guaranteed descent conjugate gradient methods and give their numerical results for large-scale unconstrained optimization.

Human and Citizen Rights Guarantees While Providing Information Security

Directory of Open Access Journals (Sweden)

Serhii Yesimov

2018-05-01

Full Text Available With the development of information and communication technologies, issues of providing information security are becoming more and more aggravated. These are crimes related to the use of electronic computers, systems and computer networks and telecommunication networks, the propaganda of separatism and extremism, etc. While providing information security in the digital environment, the role of technical and legal human rights guarantees, due to technical means of protection, is increasing. Relying on the developers of technical means of protection determines the difference between the aforesaid concepts and the traditional approach to ensuring the protection of human and citizen rights, in which responsibilities are put on information intermediaries, owners of confidential information. Technical guarantees of human rights are a necessary component of ensuring information security, but the effectiveness of the application is provided in conjunction with the legal guarantees of human rights, as evidenced by the tendency to recognize the principles of inviolability of privacy on the basis of design decisions in the law of the European Union as legal acts. Providing information security is a legitimate goal of establishing constraints of human rights, since it can be correlated with the norms of international law. The establishment of constraints of human rights is permissible in order to attain other objectives–ensuring state security, public order, health, rights and freedoms of the person in the information sphere. The legitimacy of this goal is determined by its compliance with the objectives envisaged by international agreements ratified in an established order. The article examines the impact of the use of technical means in the field of providing information security in the aspect of following the fundamental human and civil rights in Ukraine, taking into account the legislation of the European Union and the decision of the European Court

The pricing of bank debt guarantees

NARCIS (Netherlands)

Arping, S.

2010-01-01

We analyze the desirability of fair pricing of government guarantees for bank liabilities. Fair pricing is desirable only if the banking sector is sufficiently transparent. In opaque banking systems, fair pricing may exacerbate banks' incentive to take excessive risks.

12 CFR 370.6 - Assessments under the Debt Guarantee Program.

Science.gov (United States)

2010-01-01

... OF GENERAL POLICY TEMPORARY LIQUIDITY GUARANTEE PROGRAM § 370.6 Assessments under the Debt Guarantee... participating entity shall ensure that funds in an amount at least equal to the amount of the assessment are... institution shall provide the necessary funds for payment of its assessments. (3) Failure to take all...

Response of Sphagnum mosses to increased CO{sub 2} concentration and nitrogen deposition

Energy Technology Data Exchange (ETDEWEB)

Jauhiainen, J.

1998-12-31

The main objective of this work was to study the effects of different CO{sub 2} concentration and N deposition rates on Sphagna adapted to grow along a nutrient availability gradient (i.e. ombrotrophy-mesotrophy-eutrophy). The study investigated: (i) the effects of various longterm CO{sub 2} concentrations on the rate of net photosynthesis in Sphagna, (ii) the effects of the CO{sub 2} and N treatments on the moss density, shoot dry masses, length increment and dry mass production in Sphagna, (iii) the concentrations of the major nutrients in Sphagna after prolonged exposure to the CO{sub 2} and N treatments, and (iv) species dependent differences in potential NH{sub 4}{sup +} and NO{sub 3}{sup -} uptake rates. The internal nutrient concentration of the capitulum and the production of biomass were effected less by the elevated CO{sub 2} concentrations because the availability of N was a controlling factor. In addition responses to the N treatments were related to ecological differences between the Sphagna species. Species with a high tolerance of N availability were able to acclimatise to the increased N deposition rates. The data suggests a high nutrient status is less significant than the adaptation of the Sphagna to their ecological niche (e.g. low tolerance of meso-eutrophic S. warnstorfii to high N deposition rate). At the highest N deposition rate the ombrotrophic S. fuscum had the highest increase in tissue N concentration among the Sphagna studied. S. fuscum almost died at the highest N deposition rate because of the damaging effects of N to the plant`s metabolism. Ombrotrophic hummock species such as S. fuscum, were also found to have the highest potential N uptake rate (on density of dry mass basis) compared to lawn species. The rate of net photosynthesis was initially increased with elevated CO{sub 2} concentrations, but photosynthesis was down regulated with prolonged exposure to CO{sub 2}. The water use efficiency in Sphagna appeared not to be coupled

High quality superconducting titanium nitride thin film growth using infrared pulsed laser deposition

Science.gov (United States)

Torgovkin, A.; Chaudhuri, S.; Ruhtinas, A.; Lahtinen, M.; Sajavaara, T.; Maasilta, I. J.

2018-05-01

Superconducting titanium nitride (TiN) thin films were deposited on magnesium oxide, sapphire and silicon nitride substrates at 700 °C, using a pulsed laser deposition (PLD) technique, where infrared (1064 nm) pulses from a solid-state laser were used for the ablation from a titanium target in a nitrogen atmosphere. Structural studies performed with x-ray diffraction showed the best epitaxial crystallinity for films deposited on MgO. In the best films, superconducting transition temperatures, T C, as high as 4.8 K were observed, higher than in most previous superconducting TiN thin films deposited with reactive sputtering. A room temperature resistivity down to ∼17 μΩ cm and residual resistivity ratio up to 3 were observed in the best films, approaching reported single crystal film values, demonstrating that PLD is a good alternative to reactive sputtering for superconducting TiN film deposition. For less than ideal samples, the suppression of the film properties were correlated mostly with the unintended incorporation of oxygen (5–10 at%) in the film, and for high oxygen content films, vacuum annealing was also shown to increase the T C. On the other hand, superconducting properties were surprisingly insensitive to the nitrogen content, with high quality films achieved even in the highly nitrogen rich, Ti:N = 40/60 limit. Measures to limit oxygen exposure during deposition must be taken to guarantee the best superconducting film properties, a fact that needs to be taken into account with other deposition methods, as well.

An Electronic Commerce Strategy for MTMC’s Guaranteed Traffic Program

Science.gov (United States)

1992-10-01

AD-A264 299 SELECTE October 1992 S MAY1 4 1993U C An Electronic Commerce Strategy for MTMC’s Guaranteed Traffic Program MT901R I N1. Augustine...NUMBERS An Electronic Commerce Strategy for MTMC’s Guaranteed Traffic Program C MDA903-85-C -0139 M DA903-90-C-0006 PE 0902198D 6. AUTHOR(S) M...239-1L 299-01 LMI Executive Summary AN ELECTRONIC COMMERCE STRATEGY FOR MTMC’S GUARANTEED TRAFFIC PROGRAM In 1979, the Military Traffic Management

An increase in precipitation exacerbates negative effects of nitrogen deposition on soil cations and soil microbial communities in a temperate forest.

Science.gov (United States)

Shi, Leilei; Zhang, Hongzhi; Liu, Tao; Mao, Peng; Zhang, Weixin; Shao, Yuanhu; Fu, Shenglei

2018-04-01

World soils are subjected to a number of anthropogenic global change factors. Although many previous studies contributed to understand how single global change factors affect soil properties, there have been few studies aimed at understanding how two naturally co-occurring global change drivers, nitrogen (N) deposition and increased precipitation, affect critical soil properties. In addition, most atmospheric N deposition and precipitation increase studies have been simulated by directly adding N solution or water to the forest floor, and thus largely neglect some key canopy processes in natural conditions. These previous studies, therefore, may not realistically simulate natural atmospheric N deposition and precipitation increase in forest ecosystems. In a field experiment, we used novel canopy applications to investigate the effects of N deposition, increased precipitation, and their combination on soil chemical properties and the microbial community in a temperate deciduous forest. We found that both soil chemistry and microorganisms were sensitive to these global change factors, especially when they were simultaneously applied. These effects were evident within 2 years of treatment initiation. Canopy N deposition immediately accelerated soil acidification, base cation depletion, and toxic metal accumulation. Although increased precipitation only promoted base cation leaching, this exacerbated the effects of N deposition. Increased precipitation decreased soil fungal biomass, possible due to wetting/re-drying stress or to the depletion of Na. When N deposition and increased precipitation occurred together, soil gram-negative bacteria decreased significantly, and the community structure of soil bacteria was altered. The reduction of gram-negative bacterial biomass was closely linked to the accumulation of the toxic metals Al and Fe. These results suggested that short-term responses in soil cations following N deposition and increased precipitation could change

78 FR 64175 - Hashemite Kingdom of Jordan Loan Guarantees Issued Under the Further Continuing Appropriations...

Science.gov (United States)

2013-10-28

... procedures and standard terms and conditions applicable to loan guarantees to be issued for the benefit of... Definitions. 233.03 The Guarantee. 233.04 Guarantee eligibility. 233.05 Non-impairment of the Guarantee. 233... Default; Application for Compensation; payment. 233.09 No acceleration of Eligible Notes. [[Page 64176...

Analysis of Aluminum Resource Supply Structure and Guarantee Degree in China Based on Sustainable Perspective

Directory of Open Access Journals (Sweden)

Shaoli Liu

2016-12-01

Full Text Available Aluminum is a strategic mineral resource, and China’s aluminum production and consumption is fairly large. However, its supply guarantee is uncertain because of a high dependency on external raw materials. This uncertainty may expand, so finding a way to reduce the uncertainty of aluminum resource supply is especially important. This paper applies the SFA method to analyze the aluminum flows in mainland China from 1996 to 2014, and establishes a supply structure model to measure its supply guarantee degree. The results claim that: (1 China’s aluminum production can satisfy demand and even create a surplus; (2 Domestic self-productive primary and secondary aluminum increased at an annual rate of 12% and 24%; (3 The proportion of self-productive secondary aluminum in the supply structure increased from 7.7% in 1996 to 12.8% in 2014, while that of primary aluminum decreased from 79.6% to 42.8%; (4 The total supply guarantee degree decreased from 87.3% to 55.6% in this period. These results provide a feasible way to solve this plight: the proportion of secondary aluminum in the supply structure should be enhanced, and an efficient aluminum resource recycling system needs to be established as soon as possible to ensure its sustainable supply.

Guaranteed Cost Finite-Time Control of Fractional-Order Positive Switched Systems

Directory of Open Access Journals (Sweden)

Leipo Liu

2017-01-01

Full Text Available The problem of guaranteed cost finite-time control of fractional-order positive switched systems (FOPSS is considered in this paper. Firstly, a new cost function is defined. Then, by constructing linear copositive Lyapunov functions and using the average dwell time (ADT approach, a state feedback controller and a static output feedback controller are constructed, respectively, and sufficient conditions are derived to guarantee that the corresponding closed-loop systems are guaranteed cost finite-time stable (GCFTS. Such conditions can be easily solved by linear programming. Finally, two examples are given to illustrate the effectiveness of the proposed method.

13 CFR 115.18 - Refusal to issue further guarantees; suspension and termination of PSB status.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Refusal to issue further guarantees; suspension and termination of PSB status. 115.18 Section 115.18 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SURETY BOND GUARANTEE Provisions for All Surety Bond Guarantees § 115.18 Refusal to issue further guarantees; suspension...

14 CFR 272.3 - Places eligible for guaranteed essential air service.

Science.gov (United States)

2010-01-01

... TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS ESSENTIAL AIR SERVICE TO THE FREELY ASSOCIATED STATES § 272.3 Places eligible for guaranteed essential air service. (a) Subject to the provisions of this part... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Places eligible for guaranteed essential...

Robust guaranteed cost tracking control of quadrotor UAV with uncertainties.

Science.gov (United States)

Xu, Zhiwei; Nian, Xiaohong; Wang, Haibo; Chen, Yinsheng

2017-07-01

In this paper, a robust guaranteed cost controller (RGCC) is proposed for quadrotor UAV system with uncertainties to address set-point tracking problem. A sufficient condition of the existence for RGCC is derived by Lyapunov stability theorem. The designed RGCC not only guarantees the whole closed-loop system asymptotically stable but also makes the quadratic performance level built for the closed-loop system have an upper bound irrespective to all admissible parameter uncertainties. Then, an optimal robust guaranteed cost controller is developed to minimize the upper bound of performance level. Simulation results verify the presented control algorithms possess small overshoot and short setting time, with which the quadrotor has ability to perform set-point tracking task well. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

High power pulsed magnetron sputtering: A method to increase deposition rate

International Nuclear Information System (INIS)

Raman, Priya; McLain, Jake; Ruzic, David N; Shchelkanov, Ivan A.

2015-01-01

High power pulsed magnetron sputtering (HPPMS) is a state-of-the-art physical vapor deposition technique with several industrial applications. One of the main disadvantages of this process is its low deposition rate. In this work, the authors report a new magnetic field configuration, which produces deposition rates twice that of conventional magnetron's dipole magnetic field configuration. Three different magnet pack configurations are discussed in this paper, and an optimized magnet pack configuration for HPPMS that leads to a higher deposition rate and nearly full-face target erosion is presented. The discussed magnetic field produced by a specially designed magnet assembly is of the same size as the conventional magnet assembly and requires no external fields. Comparison of deposition rates with different power supplies and the electron trapping efficiency in complex magnetic field arrangements are discussed

13 CFR 120.521 - What interest rate applies after SBA purchases its guaranteed portion?

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What interest rate applies after... 504 Loans Sba's Purchase of A Guaranteed Portion § 120.521 What interest rate applies after SBA purchases its guaranteed portion? When SBA purchases the guaranteed portion of a fixed interest rate loan...

Guaranteed convergence of the Hough transform

Science.gov (United States)

Soffer, Menashe; Kiryati, Nahum

1995-01-01

The straight-line Hough Transform using normal parameterization with a continuous voting kernel is considered. It transforms the colinearity detection problem to a problem of finding the global maximum of a two dimensional function above a domain in the parameter space. The principle is similar to robust regression using fixed scale M-estimation. Unlike standard M-estimation procedures the Hough Transform does not rely on a good initial estimate of the line parameters: The global optimization problem is approached by exhaustive search on a grid that is usually as fine as computationally feasible. The global maximum of a general function above a bounded domain cannot be found by a finite number of function evaluations. Only if sufficient a-priori knowledge about the smoothness of the objective function is available, convergence to the global maximum can be guaranteed. The extraction of a-priori information and its efficient use are the main challenges in real global optimization problems. The global optimization problem in the Hough Transform is essentially how fine should the parameter space quantization be in order not to miss the true maximum. More than thirty years after Hough patented the basic algorithm, the problem is still essentially open. In this paper an attempt is made to identify a-priori information on the smoothness of the objective (Hough) function and to introduce sufficient conditions for the convergence of the Hough Transform to the global maximum. An image model with several application dependent parameters is defined. Edge point location errors as well as background noise are accounted for. Minimal parameter space quantization intervals that guarantee convergence are obtained. Focusing policies for multi-resolution Hough algorithms are developed. Theoretical support for bottom- up processing is provided. Due to the randomness of errors and noise, convergence guarantees are probabilistic.

Certain aspects of the accounting of the bank guarantee at the principal and the beneficiary

Directory of Open Access Journals (Sweden)

L. A. Zimakova

2016-01-01

Full Text Available For any kind of business such category as risks is peculiar. The research of this category was conducted by scientists from the different sides, certain approaches of protection against risks were developed and instruments of decrease in financial risks are offered. The bank guarantee is one of the most demanded instruments of additional financial protection today. Its active using of the commercial organizations courses questions of the organization of the detailed accounting of guarantees at the principal and the beneficiary. A little concerning the historical aspect of the bank guarantee, authors provided the overview of the determinations of "bank guarantee" characterizing it as the banking service providing distribution of responsibility between the guarantor and the principal under certain conditions. Having considered the essence of the legal nature and features of the bank guarantee recommendations about the organization of the disaggregated financial accounting on off-balance accounts were developed. In particular, need of allocation of a currency type as the directions of conducting the analytics providing correctness of reflection of cost criterion is proved. For the purpose of control of timeliness of carrying out calculations it is recommended to allocate guarantees: coincident and in coincident with primary obligation; short-term and long-term. From the point of view of nature of guarantees payment guarantees and guarantees of obligation fulfilment were allocated. These recommendations concern the beneficiary, and lack of accounting entries at a principal generates need of creation of additional registers and analytical reports which forms were offered by authors. The provided recommendations will allow obtaining transparent information on bank guarantees for the purpose of its full disclosure in the financial reporting.

GUARANTEES OF THE RIGHT TO A FAIR CIVIL TRIAL

Directory of Open Access Journals (Sweden)

Diana-Loredana Jalbă

2015-11-01

Full Text Available In order to ensure the effective protection of human rights and provide for more than theoretical and illusory substantive rights, the need to define the right to a fair trial is emerging, along with the necessity that litigants become aware of the guarantees established by article 6 of the European Convention on Human Rights. Thus, the article aims to approach the ample issue regarding the litigants’ right to a fair civil trial in light of current legal regulations, and in particular, in light of the jurisprudence of the European Court of Human Rights. Given the fact that the right to a fair civil trial involves establishing, throughout the trial, a set of rules of procedure aimed at creating a balance between the parties in the process - the so-called guarantees of a fair trial - in her scientific pursuits, the author analyzes both explicit and implicit guarantees of fair trial, highlighting relevant European standards as well as their degree of implementation in the national (procedural law.

Radioactive waste disposal and study of mineral deposit of uranium

International Nuclear Information System (INIS)

Doi, Kazumi

2003-01-01

To realize high level radioactive waste disposal, it is need to guarantee with high reliability safety of isolation of radioactive waste during some ten thousand years. There are two important factors related to geophysics such as ground water and diastrophism. The problems to be solved in the present point are followings; 1) increasing data of characteristics of radionuclide within high level radioactive waste, 2) development of undisruptive exploration technologies of lithosphere, especially formal fabric of pore and 3) improvement of protection technologies of diastrophism. Our country has to make efforts to realize the safety of isolation of radioactive waste on the basis of researches, by means of keeping them in the strong facilities without disposal. The formation of concentrated uranium in the mineral deposit was explained in relation with high level radioactive waste disposal. (S.Y.)

Low-cost guaranteed-throughput communication ring for real-time streaming MPSoCs

NARCIS (Netherlands)

Dekens, B.H.J.; Kurtin, Philip Sebastian; Bekooij, Marco Jan Gerrit; Smit, Gerardus Johannes Maria

2013-01-01

Connection-oriented guaranteed-throughput mesh-based networks on chip have been proposed as a replacement for buses in real-time embedded multiprocessor systems such as software defined radios. Even with attractive features like throughput and latency guarantees they are not always used because

Increased sensitivity of anodic stripping voltammetry at the hanging mercury drop electrode by ultracathodic deposition

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Jose A.; Rodrigues, Carlos M.; Almeida, Paulo J.; Valente, Ines M.; Goncalves, Luis M. [Requimte - Departamento de Quimica e Bioquimica, Faculdade de Ciencias, Universidade do Porto, Rua do Campo Alegre, no. 687, 4169-007 Porto (Portugal); Compton, Richard G. [Department of Chemistry, Physical and Theoretical Chemistry Laboratory, Oxford University, South Parks Road, Oxford OX1 3QZ (United Kingdom); Barros, Aquiles A., E-mail: ajbarros@fc.up.pt [Requimte - Departamento de Quimica e Bioquimica, Faculdade de Ciencias, Universidade do Porto, Rua do Campo Alegre, no. 687, 4169-007 Porto (Portugal)

2011-09-09

Highlights: {yields} At very cathodic accumulation potentials (overpotential deposition) the voltammetric signals of Zn{sup 2+}, Cd{sup 2+}, Pb{sup 2+} and Cu{sup 2+} increase. {yields} 5 to 10-fold signal increase is obtained. {yields} This effect is likely due to mercury drop oscillation at such cathodic potentials. {yields} This effect is also likely due to added local convection at the mercury drop surface caused by the evolution of hydrogen bubbles. - Abstract: An improved approach to the anodic stripping voltammetric (ASV) determination of heavy metals, using the hanging mercury drop electrode (HMDE), is reported. It was discovered that using very cathodic accumulation potentials, at which the solvent reduction occurs (overpotential deposition), the voltammetric signals of zinc(II), cadmium(II), lead(II) and copper(II) increase. When compared with the classical methodology a 5 to 10-fold signal increase is obtained. This effect is likely due to both mercury drop oscillation at such cathodic potentials and added local convection at the mercury drop surface caused by the evolution of hydrogen bubbles.

Do not pay for a Danish interest guarantee. The law of the triple blow

DEFF Research Database (Denmark)

Guillén, Montserrat; Konicz, Agnieszka Karolina; Perch Nielsen, Jens

2013-01-01

We have investigated the performance of pension schemes of with-profit policies containing a guaranteed minimum rate of return and we have found that the price of the guarantee measured in terms of lost returns is enormous. We use simple simulations rather than complex pricing methods to illustrate...... that the price of an interest guarantee is high in pension products that are currently commercialised in the market. We have found that the customer loses up to about 0.75% yearly in the rate of return when an interest guarantee is purchased, compared to the return of an equivalent saving strategy with the same...... risk at the level 95%. This can explain why such arrangements are not widely popular. Our approach can be used to inform clients, who are not experts in modern financial models, the impact of paying for an interest guarantee....

7 CFR 1720.8 - Issuance of the guarantee.

Science.gov (United States)

2010-01-01

... accounting firm or federal banking regulator, annual consolidated financial statements audited by an... financial covenants, and events of default and remedies; (3) Prior to the issuance of the guarantee, the...

Modelling the guaranteed QoS for wireless sensor networks: a network calculus approach

Directory of Open Access Journals (Sweden)

Yu Jianping

2011-01-01

Full Text Available Abstract Wireless sensor networks (WSNs became one of the high technology domains during the last 10 years. Real-time applications for them make it necessary to provide the guaranteed quality of service (QoS. The main contributions of this article are a system skeleton and a guaranteed QoS model that are suitable for the WSNs. To do it, we develop a sensor node model based on virtual buffer sharing and present a two-layer scheduling model using the network calculus. With the system skeleton, we develop a guaranteed QoS model, such as the upper bounds on buffer queue length/delay/effective bandwidth, and single-hop/multi-hops delay/jitter/effective bandwidth. Numerical results show the system skeleton and the guaranteed QoS model are scalable for different types of flows, including the self-similar traffic flows, and the parameters of flow regulators and service curves of sensor nodes affect them. Our proposal leads to buffer dimensioning, guaranteed QoS support and control in the WSNs.

7 CFR 1779.73 - Replacement of loss, theft, destruction, mutilation, or defacement of Loan Note Guarantee or...

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Replacement of loss, theft, destruction, mutilation..., theft, destruction, mutilation, or defacement of Loan Note Guarantee or Assignment Guarantee Agreement... circumstances of the loss, theft, or destruction of the Loan Note Guarantee or Assignment Guarantee Agreement...

European beef consumers' interest in a beef eating-quality guarantee

DEFF Research Database (Denmark)

Verbeke, Wim; Van Wezemael, Lyn; de Barcellos, Marcia Dutra

2010-01-01

and Germany to assess their opinions about beef muscle profiling and their interest in a beef eating-quality guarantee. Findings indicate that both concepts are well accepted by European beef consumers, although not unconditional. Besides acknowledging the opportunity to purchase beef with guaranteed...... tenderness, consumers express some reserve related to the possible upgrading of lower value cuts, too much standardisation, and the fact that tenderness is to some extent subjective. They further require the system to be simple, sufficiently documented and independent-party controlled. The insights obtained...

12 CFR 370.3 - Debt Guarantee Program.

Science.gov (United States)

2010-01-01

... convertible debt to be issued, (C) The mandatory conversion date, (D) The conversion rate (i.e., the total... exchange rate in effect on the date that the debt is funded. (c) Calculation and reporting responsibility... guarantee expires on the earliest of the mandatory conversion date for mandatory convertible debt, the...

48 CFR 52.228-1 - Bid Guarantee.

Science.gov (United States)

2010-10-01

... as accepted. (c) The amount of the bid guarantee shall be ____ percent of the bid price or $____, whichever is less. (d) If the successful bidder, upon acceptance of its bid by the Government within the period specified for acceptance, fails to execute all contractual documents or furnish executed bond(s...

Towards an integral analysis of stereotypes: Challenging the standard guarantee of impartiality

Directory of Open Access Journals (Sweden)

Laura Clérico

2018-05-01

Full Text Available The use of stereotypes to the detriment of the discriminated group should imply questioning the standard guarantee of judicial impartiality. Even taking the analysis of stereotypes seriously, the depth of its consequences has not been sufficiently taken into account in the constitutional and human rights argumentation because it has not challenged with all intensity the standard way in which the guarantee of impartiality is conceived and applied in legal practice and even by the regional court for the protection of human rights. I will defend two central theses: (1 the use of stereotypes necessarily impacts on the analysis of the guarantee of impartiality and (2 impartiality must get rid of the presumption of impartiality.

Decreased Staphylococcus aureus and increased osteoblast density on nanostructured electrophoretic-deposited hydroxyapatite on titanium without the use of pharmaceuticals.

Science.gov (United States)

Mathew, Dennis; Bhardwaj, Garima; Wang, Qi; Sun, Linlin; Ercan, Batur; Geetha, Manisavagam; Webster, Thomas J

2014-01-01

Plasma-spray deposition of hydroxyapatite on titanium (Ti) has proven to be a suboptimal solution to improve orthopedic-implant success rates, as demonstrated by the increasing number of orthopedic revision surgeries due to infection, implant loosening, and a myriad of other reasons. This could be in part due to the high heat involved during plasma-spray deposition, which significantly increases hydroxyapatite crystal growth into the nonbiologically inspired micron regime. There has been a push to create nanotopographies on implant surfaces to mimic the physiological nanostructure of native bone and, thus, improve osteoblast (bone-forming cell) functions and inhibit bacteria functions. Among the several techniques that have been adopted to develop nanocoatings, electrophoretic deposition (EPD) is an attractive, versatile, and effective material-processing technique. The in vitro study reported here aimed to determine for the first time bacteria responses to hydroxyapatite coated on Ti via EPD. There were six and three times more osteoblasts on the electrophoretic-deposited hydroxyapatite on Ti compared with Ti (control) and plasma-spray-deposited hydroxyapatite on Ti after 5 days of culture, respectively. Impressively, there were 2.9 and 31.7 times less Staphylococcus aureus on electrophoretic-deposited hydroxyapatite on Ti compared with Ti (control) and plasma-spray-deposited hydroxyapatite on Ti after 18 hours of culture, respectively. Compared with uncoated Ti and plasma-sprayed hydroxyapatite coated on Ti, the results provided significant promise for the use of EPD to improve bone-cell density and be used as an antibacterial coating without resorting to the use of antibiotics.

42 CFR 57.1507 - Limitations applicable to loan guarantee.

Science.gov (United States)

2010-10-01

... FOR CONSTRUCTION OF TEACHING FACILITIES, EDUCATIONAL IMPROVEMENTS, SCHOLARSHIPS AND STUDENT LOANS Loan Guarantees and Interest Subsidies to Assist in Construction of Teaching Facilities for Health Profession...

32 CFR 151.7 - Fair trial guarantees.

Science.gov (United States)

2010-07-01

... MILITARY JUSTICE STATUS OF FORCES POLICIES AND INFORMATION § 151.7 Fair trial guarantees. The following is... competent interpreter when the accused does not understand the language in which the trial is conducted and does not have counsel proficient in the language both of the court and of the accused. (p) Accused is...

How a Guaranteed Annual Income Could Put Food Banks Out of Business

Directory of Open Access Journals (Sweden)

J.C. Herbert Emery

2013-12-01

Full Text Available The federal Conservative government recently began phasing in a plan to raise the age of eligibility for Old Age Security from 65 to 67. But a more sensible move for improving the effectiveness of Canada’s social safety-net system may be to actually lower the age below 65 and rely strictly on an income test instead, regardless of age. The government could go a lot further toward the reduction of poverty in Canada by building on the success of its income supports for seniors, and making them available to poor Canadians of all ages. Canada can boast of having one of the lowest rates for poverty among seniors in the world, largely due to its guaranteed income programs for those 65 years and older. When low-income Canadians turn 65 years old and leave behind low-paying, often unstable jobs, their poverty levels drop substantially. What a guaranteed income provides, that their vulnerable job situation did not, is a form of protection against budget shocks — a sudden volatility in income or expenses without the access to savings or credit to smooth things out until stability returns. A guaranteed income provides a kind of “disaster insurance” that can protect someone in a crisis situation from going without necessities such as food or even shelter. Statistics show that the rate of Canadians experiencing “food insecurity” — that is, lack of access to food because of financial constraints — is half that among Canadians aged 65 to 69 years than it is among those aged 60 to 64. Self-reported rates of physical and mental health improve markedly as well after lowincome Canadians move from low-wage, insecure employment to a guaranteed income at the age of 65. That dramatic shift in physical and mental health indicates that expanding guaranteed income programs to younger Canadians is more than a simple cost calculation: there are potential savings to be found as poorer Canadians, given a guaranteed income, become healthier and therefore reduce

Causal Relationship between Liquidity and Profitability of Nigerian Deposit Money Banks

OpenAIRE

Odunayo M. Olarewaju; Oluwafeyisayo K. Adeyemi

2015-01-01

The aim of this paper is to examine the existence and direction of causality between liquidity and profitability of deposit money banks in Nigeria. Fifteen quoted banks out of the existing nineteen banks were selected for the study. They are; Guarantee Trust bank, Zenith bank, Skye bank, Wema bank, Sterling bank, First City Monument bank, United Bank for Africa, Eco bank, First bank, Access bank, Diamond bank, Unity bank, Fidelity bank, Union bank and IBTC bank. Pairwise Granga Causality test...

Linking Financial Service Providers to Commercial Capital : How Do Guarantees Add Value?

OpenAIRE

Alexia Latortue; Jasmina Glisovic-Mezieres

2008-01-01

In microfinance, experimentation with loan guarantees began largely as an attempt to demonstrate to local banks that Microfinance Institutions (MFIs) are creditworthy. Though loan guarantees are far less common than other funding instruments, such as debt, equity, and grants, they are beginning to be used more often. This brief is based on a joint Consultative Group to Assist the Poorest (...

Designing area optimized application-specific network-on-chip architectures while providing hard QoS guarantees.

Directory of Open Access Journals (Sweden)

Sajid Gul Khawaja

Full Text Available With the increase of transistors' density, popularity of System on Chip (SoC has increased exponentially. As a communication module for SoC, Network on Chip (NoC framework has been adapted as its backbone. In this paper, we propose a methodology for designing area-optimized application specific NoC while providing hard Quality of Service (QoS guarantees for real time flows. The novelty of the proposed system lies in derivation of a Mixed Integer Linear Programming model which is then used to generate a resource optimal Network on Chip (NoC topology and architecture while considering traffic and QoS requirements. We also present the micro-architectural design features used for enabling traffic and latency guarantees and discuss how the solution adapts for dynamic variations in the application traffic. The paper highlights the effectiveness of proposed method by generating resource efficient NoC solutions for both industrial and benchmark applications. The area-optimized results are generated in few seconds by proposed technique, without resorting to heuristics, even for an application with 48 traffic flows.

Dynamics of waterflooding massive oil deposits in the Chechen Ingush ASSR, including fissured reservoirs in the late stages of development

Energy Technology Data Exchange (ETDEWEB)

Tatashev, K.Kh.; Soboleva, G.N.; Tagunova, A.V.

1979-01-01

In 1956 in the Chechen Ingush ASSR a number of massive oil deposits located in fissured cavernous Upper Cretaceous limestone were developed. The deposits were developed by water-oil displacement from the edges and pericline toward the dome of the structure using the natural water pressure drive as well as artificial marginal flooding. The great oil-bearing capacity, the good hydrodynamic link with the deposit, the close magnitude of oil viscosity and water under the layer conditions and the significant difference in their density (0.4-0.5 g/cm/sup 3/) practically guarantees pistonlike oil displacement. Based on the deposit's geologic-physical characteristics, the late stage of development may be characterized by noncontinuous time and a sharp increase in well waterflooding to maintain full flooding. However, the data obtained from working the field suggest that a sharp increase in waterflooding will be substituted by a slow increase, by stabilization and possibly even a decrease in the percentage of water over the last 3-6 years. This occurred in a number of cases where measures were taken to limit the liquid flow, to periodically operate the well with isolated waterflooding and pereclinal perforation at intervals. This also occurred in a number of cases where the rate of fluid yield was naturally lowered by decreasing the number of producing wells due to waterflooding and disengagement. To more completely extract the oil from relatively low permeable areas of the deposits and to develop them in the later stages, it is useful to use a slow tempo once all wells have been brought to perclinal interval operation.

Energy accumulating substances for increase of replacement factor of petroleum from layer on Kumkol deposit

International Nuclear Information System (INIS)

Yunusov, U.I.; Ospanov, E.S.; Nurabaev, B.K.; Ajshuakov, K.A.; Tursunkulov, Eh.T.

1997-01-01

Laboratory researches with using of alloys of energy accumulating substances are carried out with the purpose of petroleum output increase on Kumkol deposit. Factor of petroleum replacement within range from 79.5 to 82.0 % is received by use silico-barium, silico-calcium and ferro-silicium with alkali and aluminium. (author)

Historical nitrogen content of bryophyte tissue as an indicator of increased nitrogen deposition in the Cape Metropolitan Area, South Africa

International Nuclear Information System (INIS)

Wilson, D.; Stock, W.D.; Hedderson, T.

2009-01-01

Information on changes in precipitation chemistry in the rapidly expanding Cape Metropolitan Area (CMA) of South Africa is scarce. To obtain a long-term record of N deposition we investigated changes in moss foliar N, C:N ratios and nitrogen isotope values that might reflect precipitation chemistry. Tissue from 9 species was obtained from herbarium specimens collected between 1875 and 2000 while field samples were collected in 2001/2002. There is a strong trend of increasing foliar N content in all mosses collected over the past century (1.32-1.69 %N). Differences exist between ectohydric mosses which have higher foliar N than the mixohydric group. C:N ratios declined while foliar δ 15 N values showed no distinct pattern. From relationships between moss tissue N and N deposition rates we estimated an increase of 6-13 kg N ha -1 a -1 since 1950. Enhanced N deposition rates of this magnitude could lead to biodiversity losses in native ecosystems. - This study of bryophyte tissue nutrient contents shows a historical increase in N deposition rates to the low nutrient adapted plant biodiversity hotspot in the Western Cape, South Africa

Historical nitrogen content of bryophyte tissue as an indicator of increased nitrogen deposition in the Cape Metropolitan Area, South Africa

Energy Technology Data Exchange (ETDEWEB)

Wilson, D. [Botany Department, University of Cape Town, Rondebosch 7701 (South Africa); Stock, W.D. [Botany Department, University of Cape Town, Rondebosch 7701 (South Africa); Centre for Ecosystem Management, School of Natural Sciences, Edith Cowan University, 100 Joondalup Drive, Joondalup, Perth, WA 6027 (Australia)], E-mail: w.stock@ecu.edu.au; Hedderson, T. [Botany Department, University of Cape Town, Rondebosch 7701 (South Africa)

2009-03-15

Information on changes in precipitation chemistry in the rapidly expanding Cape Metropolitan Area (CMA) of South Africa is scarce. To obtain a long-term record of N deposition we investigated changes in moss foliar N, C:N ratios and nitrogen isotope values that might reflect precipitation chemistry. Tissue from 9 species was obtained from herbarium specimens collected between 1875 and 2000 while field samples were collected in 2001/2002. There is a strong trend of increasing foliar N content in all mosses collected over the past century (1.32-1.69 %N). Differences exist between ectohydric mosses which have higher foliar N than the mixohydric group. C:N ratios declined while foliar {delta}{sup 15}N values showed no distinct pattern. From relationships between moss tissue N and N deposition rates we estimated an increase of 6-13 kg N ha{sup -1} a{sup -1} since 1950. Enhanced N deposition rates of this magnitude could lead to biodiversity losses in native ecosystems. - This study of bryophyte tissue nutrient contents shows a historical increase in N deposition rates to the low nutrient adapted plant biodiversity hotspot in the Western Cape, South Africa.

Economic Valuation of Sufficient and Guaranteed Irrigation Water Supply for Paddy Farms of Guilan Province

Directory of Open Access Journals (Sweden)

Mohammad Kavoosi Kalashami

2014-08-01

Full Text Available Cultivation of the strategic crop of rice highly depends to the existence of sufficient and guaranteed irrigation water, and water shortage stresses have irreparable effects on yield and quality of productions. Decrease of the Sefidrud river inflow in Guilan province which is the main source of supplying irrigation water for 171 thousand hectares under rice cropping area of this province, has been challenged sufficient and guaranteed irrigation water supply in many regions of mentioned province. Hence, in present study estimating the value that paddy farmers place on sufficient and guaranteed irrigation water supply has been considered. Economic valuation of sufficient and guaranteed irrigation water supply improves water resource management policies in demand side. Requested data set were obtained on the base of a survey and are collected from 224 paddy farms in rural regions that faced with irrigation water shortages. Then, using open-ended valuation approach and estimation of Tobit model via ML and two stages Heckman approach, eliciting paddy farmers' willingness to pay for sufficient and guaranteed irrigation water supply has been accomplished. Results revealed that farmers in investigated regions willing to pay 26.49 percent more than present costs of providing irrigation water in order to have sufficient and guaranteed irrigation water.

Depending on scientific and technological progress to prospect for superlarge uranium deposits. Across-century target for uranium resources exploration work in China

International Nuclear Information System (INIS)

Shen Feng

1995-01-01

After over 30 years' development, uranium resources exploration work in China has resulted in the discovery of more than 10 economic types of uranium deposits in 23 provinces (regions) of the whole country and large quantities of uranium reserves have been submitted which guarantee the development of nuclear industry in China. However, characteristics such as smaller size of deposits and ore bodies, and lower ore grade of discovered China's uranium deposits have brought about a series of problems on how to economically exploit and utilize these uranium resources. To prospect for superlarge uranium deposits is a guarantee of making uranium resources essentially meet the demand for the long-term development of nuclear industry in China, and is an important way of improving economic benefits in mining China's uranium resources. It is an important mark for uranium geological exploration work to go up a new step as well. China exhibits the geological environment in which various types of superlarge uranium deposits can be formed. Having the financial support from the state to uranium resources exploration work, having professional uranium exploration teams well-experienced in ore prospecting, having modernized uranium exploration techniques and equipment and also having foreign experience in prospecting for superlarge uranium deposits as reference, it is entirely possible to find out superlarge uranium deposits in China at the end of this century and at the beginning of next century. In order to realize the objective, the most important prerequisite is that research work on metallogenetic geological theory and exploration techniques and prospecting methodology for superlarge uranium deposits must be strengthened, and technical quality of the geological teams must be improved. Within this century, prospect targets should be selected and located accurately to carry out the emphatic breakthrough in exploration strategy

Robust levitation control for maglev systems with guaranteed bounded airgap.

Science.gov (United States)

Xu, Jinquan; Chen, Ye-Hwa; Guo, Hong

2015-11-01

The robust control design problem for the levitation control of a nonlinear uncertain maglev system is considered. The uncertainty is (possibly) fast time-varying. The system has magnitude limitation on the airgap between the suspended chassis and the guideway in order to prevent undesirable contact. Furthermore, the (global) matching condition is not satisfied. After a three-step state transformation, a robust control scheme for the maglev vehicle is proposed, which is able to guarantee the uniform boundedness and uniform ultimate boundedness of the system, regardless of the uncertainty. The magnitude limitation of the airgap is guaranteed, regardless of the uncertainty. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

The observable defects and the proper functioning guarantee in trading

Directory of Open Access Journals (Sweden)

Jorge Oviedo Albán

2014-12-01

Full Text Available This paper discusses two legal mechanisms for buyer´s protection contained in the Colombian Commercial Code, parallel to building regulations, because of hidden defects in the sale, which are: guarantee by observable defects at delivery and guarantee for proper functioning. The author analyzes the poor way such actions are enshrined in the Code as a consequence of a fragmented and dispersed regime for defective compliance actions in the laws of Private Law. This paper proposes a reinterpretation of such actions from the perspective of the lack of conformity that is based on a unified system of remedies for breach, concepts embodied in modern instruments of contract law.

29 CFR 541.604 - Minimum guarantee plus extras.

Science.gov (United States)

2010-07-01

... DEFINING AND DELIMITING THE EXEMPTIONS FOR EXECUTIVE, ADMINISTRATIVE, PROFESSIONAL, COMPUTER AND OUTSIDE SALES EMPLOYEES Salary Requirements § 541.604 Minimum guarantee plus extras. (a) An employer may provide... commission on sales. An exempt employee also may receive a percentage of the sales or profits of the employer...

A Best Practice for Developing Availability Guarantee Language in Photovoltaic (PV) O&M Agreements.

Energy Technology Data Exchange (ETDEWEB)

Klise, Geoffrey Taylor [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Balfour, John [High Performance PV, Phoenix, AZ (United States)

2015-11-01

This document outlines the foundation for developing language that can be utilized in an Equipment Availability Guarantee, typically included in an O&M services agreement between a PV system or plant owner and an O&M services provider, or operator. Many of the current PV O&M service agreement Availability Guarantees are based on contracts used for traditional power generation, which create challenges for owners and operators due to the variable nature of grid-tied photovoltaic generating technologies. This report documents language used in early PV availability guarantees and presents best practices and equations that can be used to more openly communicate how the reliability of the PV system and plant equipment can be expressed in an availability guarantee. This work will improve the bankability of PV systems by providing greater transparency into the equipment reliability state to all parties involved in an O&M services contract.

CONSIDERATIONS REGARDING THE GUARANTEEING OF HUMAN RIGHTS IN ROMANIA

Directory of Open Access Journals (Sweden)

ELENA PARASCHIV

2012-05-01

Full Text Available In our country existed and exists still a constant concern to respect and guarantee human rights and fundamental freedoms, especially after 1989, when Romania became a member or acceding to international or regional treaties and conventions enshrining such rights. Taking into consideration the importance of respecting human rights, we consider that is necessary to research how they are secured in Romania, because only when these guarantees are known by their beneficiaries and those involved in their protection, actions which affect these values of humanity can be avoided. In human rights, rules of international law have priority over those entered in the domestic law if they contain provisions which may be interpreted differently on the same matter, unless the Constitution or national laws contain more favourable provisions.

When Justice Is Up to You. Celebrating America's Guarantee of Trial by Jury.

Science.gov (United States)

National Inst. for Citizen Education in the Law, Washington, DC.

Featuring a mock trial tested in the District of Columbia, the objective of this manual is to help students learn more about the constitutional guarantee of trial by jury. Prepared as five separate lessons, the manual examines one alternative to the jury system--trial by ordeal; traces the development of the guarantee of trial by jury; explores…

7 CFR 3575.73 - Replacement of loss, theft, destruction, mutilation, or defacement of Loan Note Guarantee or...

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Replacement of loss, theft, destruction, mutilation... AGRICULTURE GENERAL Community Programs Guaranteed Loans § 3575.73 Replacement of loss, theft, destruction... circumstances of the loss, theft, or destruction of the Loan Note Guarantee or Assignment Guarantee Agreement...

7 CFR 1493.40 - Application for payment guarantee.

Science.gov (United States)

2010-01-01

... and allowances, if any. (11) Port value (includes upward loading tolerance, if any). (12) Guaranteed..., contract loading tolerance and, if necessary, a request for CCC to reserve coverage up to the maximum quantity permitted by the contract loading tolerance. (9) Unit sales price of the commodity, or a mechanism...

Applying Service Performance Guarantees to Reduce Risk Perception in the Purchase and Consumption of Higher Education

Directory of Open Access Journals (Sweden)

Nooraini Mohamad Sheriff

2006-12-01

Full Text Available The intangible nature of education is one contributor to consumers’ perception of risk prior to their purchase and consumption. This risk includes: functional risk, financial risk, temporal risk, physical risk, psychological risk and social risk. The presence of these risks often makes consumer evaluation prior to purchase and consumption difficult. Invoking a service guarantee is a platform available to enable higher educational institutions to minimize such risk perception so as to induce purchase. Specifically, service guarantee for higher education entails the application of teaching performance guarantee. This form of guarantee focuses on two important customer groups of higher educational institutions namely, students and faculty members, and focuses only on a specific performance aspect such as instructor’s performance. Thus, if students are dissatisfied with an instructor’s performance they are entitled to receive their money back. The imposition of such a teaching performance guarantee would implicate instructor’s accountability for certain aspects of their performance. It also establishes a mechanism to solicit feedback to better understand why and how instructors fail. Consequently, service performance guarantee creates a high level of customer focus and signals instructors’ care towards students

The Impact of Public Guarantees on Bank Risk Taking : Evidence from a Natural Experiment

NARCIS (Netherlands)

Gropp, R.; Grundl, C.; Guttler, A.

2010-01-01

In 2001, government guarantees for savings banks in Germany were removed following a law suit. We use this natural experiment to examine the effect of government guarantees on bank risk taking, using a large data set of matched bank/borrower information. The results suggest that banks whose

Implementation of new integrated evaporation equipment for the preparation of 238U targets and improvement of the deposition process

Science.gov (United States)

Vanleeuw, D.; Lewis, D.; Moens, A.; Sibbens, G.; Wiss, T.

2018-05-01

Measurement of neutron cross section data is a core activity of the JRC-Directorate G for Nuclear Safety and Security in Geel. After a period of reduced activity and in line with a renewed interest for nuclear data required for GenIV reactors and waste minimization, the demand for high quality actinide targets increased. Physical vapour deposition by thermal evaporation is a key technique to prepare homogeneous thin actinide layers, but due to ageing effects the earlier in-house developed equipment can no longer provide the required quality. Because of a current lack of experience and human resources cooperation with private companies is required for the development of new deposition equipment directly integrated in a glove box. In this paper we describe the design, implementation and validation of the first commercial actinide evaporator in a glove box as well as the optimization of the deposition process. Highly enriched 238U3O8 was converted to 238UF4 powder and several deposition runs were performed on different substrates. The deposition parameters were varied and defined in order to guarantee physical and chemical stable homogeneous UF4 layers, even on polished substrates which was not longer feasible with the older equipment. The stability problem is discussed in view of the thin layer growth by physical vapour deposition and the influence of the deposition parameters on the layer quality. The deposits were characterized for the total mass by means of substitution weighing and for the areal density of 238U by means of alpha particle counting and thermal ionization mass spectrometry (TIMS). The quality of the layer was visually evaluated and by means of stereo microscopy and auto radiography.

Electrophoretic Deposition of Gallium with High Deposition Rate

Directory of Open Access Journals (Sweden)

Hanfei Zhang

2014-12-01

Full Text Available In this work, electrophoretic deposition (EPD is reported to form gallium thin film with high deposition rate and low cost while avoiding the highly toxic chemicals typically used in electroplating. A maximum deposition rate of ~0.6 μm/min, almost one order of magnitude higher than the typical value reported for electroplating, is obtained when employing a set of proper deposition parameters. The thickness of the film is shown to increase with deposition time when sequential deposition is employed. The concentration of Mg(NO32, the charging salt, is also found to be a critical factor to control the deposition rate. Various gallium micropatterns are obtained by masking the substrate during the process, demonstrating process compatibility with microfabrication. The reported novel approach can potentially be employed in a broad range of applications with Ga as a raw material, including microelectronics, photovoltaic cells, and flexible liquid metal microelectrodes.

Nonfragile Guaranteed Cost Control and Optimization for Interconnected Systems of Neutral Type

Directory of Open Access Journals (Sweden)

Heli Hu

2013-01-01

Full Text Available The design and optimization problems of the nonfragile guaranteed cost control are investigated for a class of interconnected systems of neutral type. A novel scheme, viewing the interconnections with time-varying delays as effective information but not disturbances, is developed to decrease the conservatism. Many techniques on decomposing and magnifying the matrices are utilized to obtain the guaranteed cost of the considered system. Also, an algorithm is proposed to solve the nonlinear problem of the interconnected matrices. Based on this algorithm, the minimization of the guaranteed cost of the considered system is obtained by optimization. Further, the state feedback control is extended to the case in which the underlying system is dependent on uncertain parameters. Finally, two numerical examples are given to illustrate the proposed method, and some comparisons are made to show the advantages of the schemes of dealing with the interconnections.

THE LETTER OF GUARANTEE FROM THE PERSPECTIVE OF THE NEW CIVIL CODE

Directory of Open Access Journals (Sweden)

LUMINITA TULEASCA

2011-04-01

Full Text Available The letter of guarantee is frequently used in the domestic and international commercial activity, first of all, for the safety offered for securing the contractual obligations without blocking the pecuniary funds and, second of all, due to the existing uniform international regulations that correspond to the needs supporting the occurrence of these types of autonomous securities.In Romania, the lack of legal policing of the letter of guarantee has created practical difficulties and offered judges the possibility to "make the law" in the litigations generated by the enforcement or by the suspension of enforcement of these contractual securities.This work analysis the regulation of the letter of guarantee provided in the New Civil Code from the perspective of its harmonization with the Uniform Rules of the International Chamber of Commerce in Paris and with the Draft Common Frame of Reference in the matter of the European private law.

The influences of target properties and deposition times on pulsed laser deposited hydroxyapatite films

International Nuclear Information System (INIS)

Bao Quanhe; Chen Chuanzhong; Wang Diangang; Liu Junming

2008-01-01

Hydroxyapatite films were produced by pulsed laser deposition from three kinds of hydroxyapatite targets and with different deposition times. A JXA-8800R electron probe microanalyzer (EPMA) with a Link ISIS300 energy spectrum analyzer was used to give the secondary electron image (SE) and determine the element composition of the films. The phases of thin film were analyzed by a D/max-γc X-ray diffractometer (XRD). The Fourier-transform infrared spectroscopy (FT-IR) was used to characterize the hydroxyl, phosphate and other functional groups. The results show that deposited films were amorphous which mainly composed of droplet-like particles and vibration of PO 4 3- groups. With the target sintering temperature deposition times increasing, the density of droplets is decreased. While with deposition times increasing, the density of droplets is increased. With the target sintering temperature and deposition time increasing, the ratio of Ca/P is increasing and higher than that of theoretical value of HA

Impact of increasing ship emissions on air quality and deposition over Europe by 2030

Energy Technology Data Exchange (ETDEWEB)

Collins, Bill; Sanderson, Michael G.; Johnson, Colin E. [Met Office Hadley Centre for Climate Change, Exeter (United Kingdom)

2009-07-01

A global chemistry-transport model has been used to study the effect of shipping emissions on air quality and ecosystems over Europe, through changes in surface ozone and surface sulphate aerosols, and changes in the deposition of sulphur and oxidised nitrogen. Scenarios are chosen to determine the impact of current (2000) shipping emissions, and the combined impact of changes in land-based and shipping emissions by 2030. The effects of shipping on ozone are small, compared to land-based emissions changes, and can be both positive and negative. Due to the non-linear nature of ozone chemistry, the effects of shipping depend on the magnitude of the emission change, and on the choice of scenario for the land-based emissions. The effects on sulphate aerosol levels and deposition fluxes of sulphate aerosols and oxidised nitrogen species are larger, and are comparable to expected changes in land-based emissions. This is particularly true for SO{sub 2} emissions from shipping. SO{sub 2} has a sufficiently short lifetime that most of the impacts are felt within the European region, although much of that is over the sea. The increase in sulphate aerosols and sulphur deposition due to the SO{sub 2} from shipping will offset 75 % of the benefits in air quality that would be expect from land-based emission controls under the SRES A2 scenario. (orig.)

Monitoring and Evaluation of Cultivated Land Irrigation Guarantee Capability with Remote Sensing

Science.gov (United States)

Zhang, C., Sr.; Huang, J.; Li, L.; Wang, H.; Zhu, D.

2015-12-01

Abstract: Cultivated Land Quality Grade monitoring and evaluation is an important way to improve the land production capability and ensure the country food safety. Irrigation guarantee capability is one of important aspects in the cultivated land quality monitoring and evaluation. In the current cultivated land quality monitoring processing based on field survey, the irrigation rate need much human resources investment in long investigation process. This study choses Beijing-Tianjin-Hebei as study region, taking the 1 km × 1 km grid size of cultivated land unit with a winter wheat-summer maize double cropping system as study object. A new irrigation capacity evaluation index based on the ratio of the annual irrigation requirement retrieved from MODIS data and the actual quantity of irrigation was proposed. With the years of monitoring results the irrigation guarantee capability of study area was evaluated comprehensively. The change trend of the irrigation guarantee capability index (IGCI) with the agricultural drought disaster area in rural statistical yearbook of Beijing-Tianjin-Hebei area was generally consistent. The average of IGCI value, the probability of irrigation-guaranteed year and the weighted average which controlled by the irrigation demand index were used and compared in this paper. The experiment results indicate that the classification result from the present method was close to that from irrigation probability in the gradation on agriculture land quality in 2012, with overlap of 73% similar units. The method of monitoring and evaluation of cultivated land IGCI proposed in this paper has a potential in cultivated land quality level monitoring and evaluation in China. Key words: remote sensing, evapotranspiration, MODIS cultivated land quality, irrigation guarantee capability Authors: Chao Zhang, Jianxi Huang, Li Li, Hongshuo Wang, Dehai Zhu China Agricultural University zhangchaobj@gmail.com

Biochar amendment decreases soil microbial biomass and increases bacterial diversity in Moso bamboo (Phyllostachys edulis) plantations under simulated nitrogen deposition

Science.gov (United States)

Li, Quan; Lei, Zhaofeng; Song, Xinzhang; Zhang, Zhiting; Ying, Yeqing; Peng, Changhui

2018-04-01

Biochar amendment has been proposed as a strategy to improve acidic soils after overuse of nitrogen fertilizers. However, little is known of the role of biochar in soil microbial biomass carbon (MBC) and bacterial community structure and diversity after soil acidification induced by nitrogen (N) deposition. Using high-throughput sequencing of the 16S rRNA gene, we determined the effects of biochar amendment (BC0, 0 t bamboo biochar ha‑1 BC20, 20 t bamboo biochar ha‑1 and BC40, 40 t bamboo biochar ha‑1) on the soil bacterial community structure and diversity in Moso bamboo plantations that had received simulated N deposition (N30, 30 kg N ha‑1 yr‑1 N60, 60 kg N ha‑1 yr‑1 N90, 90 kg N ha‑1 yr‑1 and N-free) for 21 months. After treatment of N-free plots, BC20 significantly increased soil MBC and bacterial diversity, while BC40 significantly decreased soil MBC but increased bacterial diversity. When used to amend N30 and N60 plots, biochar significantly decreased soil MBC and the reducing effect increased with biochar amendment amount. However, these significant effects were not observed in N90 plots. Under N deposition, biochar amendment largely increased soil bacterial diversity, and these effects depended on the rates of N deposition and biochar amendment. Soil bacterial diversity was significantly related to the soil C/N ratio, pH, and soil organic carbon content. These findings suggest an optimal approach for using biochar to offset the effects of N deposition in plantation soils and provide a new perspective for understanding the potential role of biochar amendments in plantation soil.

Increased charge storage capacity of titanium nitride electrodes by deposition of boron-doped nanocrystalline diamond films

DEFF Research Database (Denmark)

Meijs, Suzan; McDonald, Matthew; Sørensen, Søren

2015-01-01

The aim of this study was to investigate the feasibility of depositing a thin layer of boron-doped nanocrystalline diamond (B-NCD) on titanium nitride (TiN) coated electrodes and the effect this has on charge injection properties. The charge storage capacity increased by applying the B-NCD film...

13 CFR 400.214 - Participations in guaranteed loans.

Science.gov (United States)

2010-01-01

...) Subject to paragraphs (b), (c) and (d) of this section, a Lender may distribute the risk of a portion of a... the Guarantee is assigned, conveyed, sold, or transferred in whole or in part; (2) The Lender remains... Lenders; (2) Private investment funds and insurance companies that do not usually invest in commercial...

Using atomic layer deposited tungsten to increase thermal conductivity of a packed bed

Energy Technology Data Exchange (ETDEWEB)

Van Norman, Staci A.; Falconer, John L.; Weimer, Alan W., E-mail: alan.weimer@colorado.edu [Department of Chemical and Biological Engineering, University of Colorado, UCB 596, Boulder, Colorado 80309-0596 (United States); Tringe, Joseph W.; Sain, John D. [Lawrence Livermore National Laboratory, 7000 East Ave, Livermore, California 94550 (United States); Yang, Ronggui [Department of Mechanical Engineering, University of Colorado, UCB 427, Boulder, Colorado 80309-0427 (United States)

2015-04-13

This study investigated the effective thermal conductivity (k{sub eff}) of packed-beds that contained porous particles with nanoscale tungsten (W) films of different thicknesses formed by atomic layer deposition (ALD). A continuous film on the particles is vital towards increasing k{sub eff} of the packed beds. For example, the k{sub eff} of an alumina packed bed was increased by three times after an ∼8-nm continuous W film with 20 cycles of W ALD, whereas k{sub eff} was decreased on a polymer packed bed with discontinuous, evenly dispersed W-islands due to nanoparticle scattering of phonons. For catalysts, understanding the thermal properties of these packed beds is essential for developing thermally conductive supports as alternatives to structured supports.

Very low roughness MAPLE-deposited films of a light emitting polymer: an alternative to spin coating

International Nuclear Information System (INIS)

Caricato, A P; Cesaria, M; Leo, C; Mazzeo, M; Genco, A; Tunno, T; Gigli, G; Martino, M; Carallo, S; Massafra, A

2015-01-01

The matrix assisted pulsed laser evaporation (MAPLE) technique is emerging as an alternative route to conventional deposition methods of organic materials (solution-phase and thermal evaporation approaches). However, the high surface roughness of the films deposited by MAPLE makes this technique not compatible with applications in electronics and photonics. In this paper we report the deposition of MAPLE-films of a green light emitting polymer, commercially named ADS125GE, with remarkable low roughness values, down to about 10 nm at the thickness conventionally used in photonic devices (∼40 nm). This issue is discussed as a function of polymer concentration, target-substrate distance and substrate rotation based on AFM topography images, roughness estimation and optical (absorption and luminescent) measurements. In addition we have fabricated an organic light emitting diode with this technique using the best deposition parameters which guarantee the lowest roughness. These results open the way to MAPLE applications in organic photonics and opto-electronics. (paper)

Pricing and Hedging Guaranteed Returns on Mix Funds

NARCIS (Netherlands)

Vellekoop, M.H.; van de Kamp, A.A.; Post, B.A.

2006-01-01

Abstract In this paper we propose a valuation and hedging strategy for a guaranteed minimal rate of return on a mix fund, which participates in both bonds and stocks. For the case where a fixed amount of money is invested, we show that a European put option on the mix fund replicates the cash flows

Resilient guaranteed cost control of a power system.

Science.gov (United States)

Soliman, Hisham M; Soliman, Mostafa H; Hassan, Mohammad F

2014-05-01

With the development of power system interconnection, the low-frequency oscillation is becoming more and more prominent which may cause system separation and loss of energy to consumers. This paper presents an innovative robust control for power systems in which the operating conditions are changing continuously due to load changes. However, practical implementation of robust control can be fragile due to controller inaccuracies (tolerance of resistors used with operational amplifiers). A new design of resilient (non-fragile) robust control is given that takes into consideration both model and controller uncertainties by an iterative solution of a set of linear matrix inequalities (LMI). Both uncertainties are cast into a norm-bounded structure. A sufficient condition is derived to achieve the desired settling time for damping power system oscillations in face of plant and controller uncertainties. Furthermore, an improved controller design, resilient guaranteed cost controller, is derived to achieve oscillations damping in a guaranteed cost manner. The effectiveness of the algorithm is shown for a single machine infinite bus system, and then, it is extended to multi-area power system.

7 CFR 4279.75 - Sale or assignment of guaranteed loan.

Science.gov (United States)

2010-01-01

... borrower's immediate families, officers, directors, stockholders, other owners, or a parent, subsidiary or...) or any successor section will not be guaranteed. (a) Single note system. The entire loan is evidenced...

Molecular and Microbial Mechanisms Increasing Soil C Storage Under Future Rates of Anthropogenic N Deposition

Energy Technology Data Exchange (ETDEWEB)

Zak, Donald R. [Univ. of Michigan, Ann Arbor, MI (United States)

2017-11-17

A growing body of evidence reveals that anthropogenic N deposition can reduce the microbial decay of plant detritus and increase soil C storage across a wide range of terrestrial ecosystems. This aspect of global change has the potential to constrain the accumulation of anthropogenic CO₂ in the Earth’s atmosphere, and hence slow the pace of climate warming. The molecular and microbial mechanisms underlying this biogeochemical response are not understood, and they are not a component of any coupled climate-biogeochemical model estimating ecosystem C storage, and hence, the future climate of an N-enriched Earth. Here, we report the use of genomic-enabled approaches to identify the molecular underpinnings of the microbial mechanisms leading to greater soil C storage in response to anthropogenic N deposition, thereby enabling us to better anticipate changes in soil C storage.

7 CFR 1980.488 - Guaranteed industrial development bond issues.

Science.gov (United States)

2010-01-01

... industrial plants for lease to private businesses engaged in industrial manufacturing and does not provide... 7 Agriculture 14 2010-01-01 2009-01-01 true Guaranteed industrial development bond issues. 1980..., DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL Business and Industrial Loan...

Event-Triggered Asynchronous Guaranteed Cost Control for Markov Jump Discrete-Time Neural Networks With Distributed Delay and Channel Fading.

Science.gov (United States)

Yan, Huaicheng; Zhang, Hao; Yang, Fuwen; Zhan, Xisheng; Peng, Chen

2017-08-18

This paper is concerned with the guaranteed cost control problem for a class of Markov jump discrete-time neural networks (NNs) with event-triggered mechanism, asynchronous jumping, and fading channels. The Markov jump NNs are introduced to be close to reality, where the modes of the NNs and guaranteed cost controller are determined by two mutually independent Markov chains. The asynchronous phenomenon is considered, which increases the difficulty of designing required mode-dependent controller. The event-triggered mechanism is designed by comparing the relative measurement error with the last triggered state at the process of data transmission, which is used to eliminate dispensable transmission and reduce the networked energy consumption. In addition, the signal fading is considered for the effect of signal reflection and shadow in wireless networks, which is modeled by the novel Rice fading models. Some novel sufficient conditions are obtained to guarantee that the closed-loop system reaches a specified cost value under the designed jumping state feedback control law in terms of linear matrix inequalities. Finally, some simulation results are provided to illustrate the effectiveness of the proposed method.

Non-fragile guaranteed cost control for uncertain neutral dynamic systems with time-varying delays in state and control input

International Nuclear Information System (INIS)

Lien, C.-H.

2007-01-01

This article considers non-fragile guaranteed cost control problem for a class of uncertain neutral system with time-varying delays in both state and control input. Delay-dependent criteria are proposed to guarantee the robust stabilization of systems. Linear matrix inequality (LMI) optimization approach is used to solve the non-fragile guaranteed cost control problem. Non-fragile guaranteed cost control for unperturbed neutral system is considered in the first step. Robust non-fragile guaranteed cost control for uncertain neutral system is designed directly from the unperturbed condition. An efficient approach is proposed to design the non-fragile guaranteed cost control for uncertain neutral systems. LMI toolbox of Matlab is used to implement the proposed results. Finally, a numerical example is illustrated to show the usefulness of the proposed results

Electrodeposition of Ru in TiO_2 nanotubes: increase of photocatalytical activity and identification of deposition route

International Nuclear Information System (INIS)

Castelhano, Douglas Iafrate; Rodrigues, Christiane de Arruda; Bertazzoli, Rodnei

2014-01-01

TiO2 nanotubes are semiconductors widely used in heterogeneous photocatalysis processes. It has a band gap energy (E_b_g) of 3,2 eV and an photoactive crystalline structure (anatase). To increase the photocatalytic activity of this oxide, by lowering the Ebg and reduction of charge recombination rate, a modification of oxide crystalline layer was made with ruthenium, using electrochemical deposition at constant potential. TiO_2 layer was made by anodization process at 20V, followed by thermic treatment in 450 deg C and electrodeposition of Ru at constant potential. Voltammetric studies showed that Ru electrodeposition occurs in two stages, and in the second stage is the deposition of metallic Ru. Photocurrent studies showed that the amount of Ru in the oxide layer varies according with the applied potential and a significant increase of semiconductor activity is obtained with the introduction of small quantities of Ru, increasing at least 70% in current values. Morphological and crystallinity analysis were made using SEM and XRD. To identify and quantify Ru in TiO_2 was used WDS. (author)

Competition between Sphagnum magellanicum and Eriophorum angustifolium as affected by raised CO2 and increased N deposition

NARCIS (Netherlands)

Heijmans, M.M.P.D.; Klees, H.; Berendse, F.

2002-01-01

The competition between peat mosses (Sphagnum) and vascular plants as affected by raised CO2 and increased N deposition was studied in a glasshouse experiment by exposing peat monoliths with monocultures and mixtures of Sphagnummagellanicum and Eriophorumangustifolium to ambient (350 ppmv) or raised

7 CFR 4290.820 - Financings in the form of guarantees.

Science.gov (United States)

2010-01-01

...-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL BUSINESS INVESTMENT COMPANY...-Types of Financings § 4290.820 Financings in the form of guarantees. (a) General rule. At the request of...

[Thermolabile drugs: pharmacist intervention as a guarantee of cold chain maintenance].

Science.gov (United States)

Ricote-Lobera, I; Santos-Mena, B; Fraile-Gil, S; Ortiz-Martín, B; Hidalgo-Correas, F J; García-Díaz, B

2014-05-01

To determine whether pharmacist is able to guarantee cold chain maintenance of thermolabile drugs during transport using the available information in the reception process and to compare these results with those obtained in a subsequent intervention phase, in which the manufacturing laboratories were contacted. Intervention study, prospective and comparative"before-after". It was analyzed the storage conditions during transport of all thermolabile drugs received in a 400-bed hospital for 3 months, excluding those from clinical trials. The intervention allowed to ensure cold chain maintenance in 76,5% (n = 488) of received drugs, representing an increase of 41,8% (IC 95% 36,7-46,6%; p cold chain maintenance of received thermolabile drugs without temperature monitoring device (64,6%). Reports requested from laboratories allowed to increase significantly that percentage. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Further improvements in competitive guarantees for QoS buffering

NARCIS (Netherlands)

Bansal, N.; Fleischer, L.K.; Kimbrel, T.; Mahdian, M.; Schieber, B.; Sviridenko, M.; Diaz, J.; Karhumäki, J.; Lepistö, A.; Sannella, D.

2004-01-01

We study the behavior of algorithms for buffering packets weighted by different levels of Quality of Service (QoS) guarantees in a single queue. Buffer space is limited, and packet loss occurs when the buffer overflows. We describe a modification of the previously proposed ``preemptive greedy{''}

Stabilization with guaranteed safety using Control Lyapunov–Barrier Function

NARCIS (Netherlands)

Romdlony, Muhammad Zakiyullah; Jayawardhana, Bayu

2016-01-01

We propose a novel nonlinear control method for solving the problem of stabilization with guaranteed safety for nonlinear systems. The design is based on the merging of the well-known Control Lyapunov Function (CLF) and the recent concept of Control Barrier Function (CBF). The proposed control

Toward sensitive document release with privacy guarantees

OpenAIRE

David Sánchez; Montserrat Batet

2017-01-01

Toward sensitive document release with privacy guarantees DOI: 10.1016/j.engappai.2016.12.013 URL: http://www.sciencedirect.com/science/article/pii/S0952197616302408 Filiació URV: SI Inclòs a la memòria: SI Privacy has become a serious concern for modern Information Societies. The sensitive nature of much of the data that are daily exchanged or released to untrusted parties requires that responsible organizations undertake appropriate privacy protection measures. Nowadays, much...

QoS-Guaranteed Admission Control for OFDMA-based Systems

DEFF Research Database (Denmark)

Ramkumar, Venkata; Anggorojati, Bayu; Lucian, Stefan P. Andrei

2010-01-01

This paper proposes a novel admission control (AC) algorithm for guaranteed quality of service (QoS) to all users. The proposed solution provides better utilization of system capacity using adaptive modulation (AM). A scheduler based on a per user priority function is also given in this paper. Th...

QoE Guarantee Scheme Based on Cooperative Cognitive Cloud and Opportunistic Weight Particle Swarm

Directory of Open Access Journals (Sweden)

Weihang Shi

2015-01-01

Full Text Available It is well known that the Internet application of cloud services may be affected by the inefficiency of cloud computing and inaccurate evaluation of quality of experience (QoE seriously. In our paper, based on construction algorithms of cooperative cognitive cloud platform and optimization algorithm of opportunities weight particle swarm clustering, the QoE guarantee mechanism was proposed. The mechanism, through the sending users of requests and the cognitive neighbor users’ cooperation, combined the cooperation of subcloud platforms and constructed the optimal cloud platform with the different service. At the same time, the particle swarm optimization algorithm could be enhanced dynamically according to all kinds of opportunity request weight, which could optimize the cooperative cognitive cloud platform. Finally, the QoE guarantee scheme was proposed with the opportunity weight particle swarm optimization algorithm and collaborative cognitive cloud platform. The experimental results show that the proposed mechanism compared is superior to the QoE guarantee scheme based on cooperative cloud and QoE guarantee scheme based on particle swarm optimization, compared with optimization fitness and high cloud computing service execution efficiency and high throughput performance advantages.

Nitrogen deposition and management practices increase soil microbial biomass carbon but decrease diversity in Moso bamboo plantations

Science.gov (United States)

Li, Quan; Song, Xinzhang; Gu, Honghao; Gao, Fei

2016-06-01

Because microbial communities play a key role in carbon (C) and nitrogen (N) cycling, changes in the soil microbial community may directly affect ecosystem functioning. However, the effects of N deposition and management practices on soil microbes are still poorly understood. We studied the effects of these two factors on soil microbial biomass carbon (MBC) and community composition in Moso bamboo plantations using high-throughput sequencing of the 16S rRNA gene. Plantations under conventional (CM) or intensive management (IM) were subjected to one of four N treatments for 30 months. IM and N addition, both separately and in combination, significantly increased soil MBC while decreasing bacterial diversity. However, increases in soil MBC were inhibited when N addition exceeded 60 kg N•ha-1•yr-1. IM increased the relative abundances of Actinobacteria and Crenarchaeota but decreased that of Acidobacteria. N addition increased the relative abundances of Acidobacteria, Crenarchaeota, and Actinobacteria but decreased that of Proteobacteria. Soil bacterial diversity was significantly related to soil pH, C/N ratio, and nitrogen and available phosphorus content. Management practices exerted a greater influence over regulation of the soil MBC and microbial diversity compared to that of N deposition in Moso bamboo plantations.

A Unified Pricing of Variable Annuity Guarantees under the Optimal Stochastic Control Framework

Directory of Open Access Journals (Sweden)

Pavel V. Shevchenko

2016-07-01

Full Text Available In this paper, we review pricing of the variable annuity living and death guarantees offered to retail investors in many countries. Investors purchase these products to take advantage of market growth and protect savings. We present pricing of these products via an optimal stochastic control framework and review the existing numerical methods. We also discuss pricing under the complete/incomplete financial market models, stochastic mortality and optimal/sub-optimal policyholder behavior, and in the presence of taxes. For numerical valuation of these contracts in the case of simple risky asset process, we develop a direct integration method based on the Gauss-Hermite quadratures with a one-dimensional cubic spline for calculation of the expected contract value, and a bi-cubic spline interpolation for applying the jump conditions across the contract cashflow event times. This method is easier to implement and faster when compared to the partial differential equation methods if the transition density (or its moments of the risky asset underlying the contract is known in closed form between the event times. We present accurate numerical results for pricing of a Guaranteed Minimum Accumulation Benefit (GMAB guarantee available on the market that can serve as a numerical benchmark for practitioners and researchers developing pricing of variable annuity guarantees to assess the accuracy of their numerical implementation.

Guarantee Funds of Credits in Romania - Necessity, Features and Networking - II

Directory of Open Access Journals (Sweden)

Georgeta Dragomir

2011-12-01

Full Text Available In the current context, marked by financial crisis, economic recession, lack of liquidity andlow capitalization, the access tofinancing is more difficult, mainly due to the lack, insufficiency orlimited availability of guarantees. Guarantee funds represent an innovative solution, proven by theEuropean economies and recently launched in Romania. Taking over the international experience inorder to facilitate the SMEs’ access to financial resources has become a necessity in Romania, whichwas reflected by the creation of three specialized financial institutions in granting guarantees domain.These are bodies with private or publiccapital, which relate, based on agreements with commercialbanks. After a period of exposure to major risks from the lack of regulatory activity, the guaranteefunds, along with other non-banking financial institutions are absolutely governed by rules oftheNRB, according to the banking law and special laws. The analysis in this paper is based on the studyof several official documents, reports of specialized bodies, statistics and examples of good practice,summarized and interpreted in through comparison and developments. The aim is to identify anumber of issues that may lead to sensitize the responsible factors-public authorities, creditinstitutions, and specialists-to come up with new practical solutions that would stimulate thefinancing processof small entrepreneurs.

TLR4 mutation reduces microglial activation, increases Aβ deposits and exacerbates cognitive deficits in a mouse model of Alzheimer's disease

Directory of Open Access Journals (Sweden)

Song Min

2011-08-01

Full Text Available Abstract Background Amyloid plaques, a pathological hallmark of Alzheimer's disease (AD, are accompanied by activated microglia. The role of activated microglia in the pathogenesis of AD remains controversial: either clearing Aβ deposits by phagocytosis or releasing proinflammatory cytokines and cytotoxic substances. Microglia can be activated via toll-like receptors (TLRs, a class of pattern-recognition receptors in the innate immune system. We previously demonstrated that an AD mouse model homozygous for a loss-of-function mutation of TLR4 had increases in Aβ deposits and buffer-soluble Aβ in the brain as compared with a TLR4 wild-type AD mouse model at 14-16 months of age. However, it is unknown if TLR4 signaling is involved in initiation of Aβ deposition as well as activation and recruitment of microglia at the early stage of AD. Here, we investigated the role of TLR4 signaling and microglial activation in early stages using 5-month-old AD mouse models when Aβ deposits start. Methods Microglial activation and amyloid deposition in the brain were determined by immunohistochemistry in the AD models. Levels of cerebral soluble Aβ were determined by ELISA. mRNA levels of cytokines and chemokines in the brain and Aβ-stimulated monocytes were quantified by real-time PCR. Cognitive functions were assessed by the Morris water maze. Results While no difference was found in cerebral Aβ load between AD mouse models at 5 months with and without TLR4 mutation, microglial activation in a TLR4 mutant AD model (TLR4M Tg was less than that in a TLR4 wild-type AD model (TLR4W Tg. At 9 months, TLR4M Tg mice had increased Aβ deposition and soluble Aβ42 in the brain, which were associated with decrements in cognitive functions and expression levels of IL-1β, CCL3, and CCL4 in the hippocampus compared to TLR4W Tg mice. TLR4 mutation diminished Aβ-induced IL-1β, CCL3, and CCL4 expression in monocytes. Conclusion This is the first demonstration of TLR4

The fiduciary guarantee in the Romanian and European legal context

Directory of Open Access Journals (Sweden)

Cornelia Lefter

2016-12-01

Full Text Available The importance of the fiduciary guarantee has not reached its full potential in the Romanian market, nor in the European area. The ongoing “dispute” between the fiduciary operations (familiar to the continental law and the trust (with its common -law heritage seems to be won by the latter. However, considering the express provisions on the fiduciary operations in the Romanian Civil Code entered into force in 2011, similar to the introduction of the same legal instrument in the French Civil Code in 2007, could give a boost to this ancient tool, present from the Roman era. Even if the European legal framework do not provide many rules on this institution, however, the Financial Collateral Directive raised many questions on how the fiduciary guarantees can be used in practice, and contributed to the change that followed in this area.

Mahanaxar: quality of service guarantees in high-bandwidth, real-time streaming data storage

Energy Technology Data Exchange (ETDEWEB)

Bigelow, David [Los Alamos National Laboratory; Bent, John [Los Alamos National Laboratory; Chen, Hsing-Bung [Los Alamos National Laboratory; Brandt, Scott [UCSC

2010-04-05

Large radio telescopes, cyber-security systems monitoring real-time network traffic, and others have specialized data storage needs: guaranteed capture of an ultra-high-bandwidth data stream, retention of the data long enough to determine what is 'interesting,' retention of interesting data indefinitely, and concurrent read/write access to determine what data is interesting, without interrupting the ongoing capture of incoming data. Mahanaxar addresses this problem. Mahanaxar guarantees streaming real-time data capture at (nearly) the full rate of the raw device, allows concurrent read and write access to the device on a best-effort basis without interrupting the data capture, and retains data as long as possible given the available storage. It has built in mechanisms for reliability and indexing, can scale to meet arbitrary bandwidth requirements, and handles both small and large data elements equally well. Results from our prototype implementation shows that Mahanaxar provides both better guarantees and better performance than traditional file systems.

Vertical Handover Algorithm for WBANs in Ubiquitous Healthcare with Quality of Service Guarantees

Directory of Open Access Journals (Sweden)

Dong Doan Van

2017-03-01

Full Text Available Recently, Wireless Body Area Networks (WBANs have become an emerging technology in healthcare, where patients are equipped withwearable and implantable body sensor nodes to gather sensory information for remote monitoring. The increasing development of coordinator devices on patients enables the internetworking of WBANs in heterogeneous wireless networks to deliver physiological information that is collected at remote terminals in a timely fashion. However, in this type of network, providing a seamless handover with a guaranteed Quality of Service (QoS, especially emergency services, is a challenging task. In this paper, we proposed an effective Multi-Attribute Decision-Making (MADM handover algorithm that guarantees seamless connectivity. A patient’s mobile devices automatically connect to the best network that fulfills the QoS requirements of different types of applications. Additionally, we integrated a Content-Centric Networking (CCN processing module into different wireless networks to reduce packet loss, enhance QoS and avoid unnecessary handovers by leveraging in-network caching to achieve efficient content dissemination for ubiquitous healthcare. Simulation results proved that our proposed approach forthe model with CCN outperforms the model without CCN and Received Signal Strength Vertical Handoff (RSS-VHD in terms of the number of handovers, enhancing QoS, packet loss, and energy efficiency.

Increased sensitivity of anodic stripping voltammetry at the hanging mercury drop electrode by ultracathodic deposition.

Science.gov (United States)

Rodrigues, José A; Rodrigues, Carlos M; Almeida, Paulo J; Valente, Inês M; Gonçalves, Luís M; Compton, Richard G; Barros, Aquiles A

2011-09-09

An improved approach to the anodic stripping voltammetric (ASV) determination of heavy metals, using the hanging mercury drop electrode (HMDE), is reported. It was discovered that using very cathodic accumulation potentials, at which the solvent reduction occurs (overpotential deposition), the voltammetric signals of zinc(II), cadmium(II), lead(II) and copper(II) increase. When compared with the classical methodology a 5 to 10-fold signal increase is obtained. This effect is likely due to both mercury drop oscillation at such cathodic potentials and added local convection at the mercury drop surface caused by the evolution of hydrogen bubbles. Copyright © 2011 Elsevier B.V. All rights reserved.

78 FR 691 - Maximum Loan Amount for Business and Industry Guaranteed Loans in Fiscal Year 2013

Science.gov (United States)

2013-01-04

... DEPARTMENT OF AGRICULTURE Rural Business-Cooperative Service Maximum Loan Amount for Business and Industry Guaranteed Loans in Fiscal Year 2013 AGENCY: Rural Business-Cooperative Service, USDA. ACTION... and Industry (B&I) guaranteed loans of $25 million or less under certain circumstances. Due to the...

78 FR 66841 - Israel Loan Guarantees Issued Under the Emergency Wartime Supplemental Appropriations Act of 2003...

Science.gov (United States)

2013-11-07

... AGENCY FOR INTERNATIONAL DEVELOPMENT 22 CFR Part 230 Israel Loan Guarantees Issued Under the... the Government of Israel on behalf of the State of Israel. Pursuant to the Emergency Wartime... International Development, may issue loan guarantees applicable to sums borrowed by the Government of Israel on...

Enhanced nitrogen deposition over China

Energy Technology Data Exchange (ETDEWEB)

Liu, Xuejun; Zhang, Ying; Han, Wenxuan; Tang, Aohan; Shen, Jianlin; Cui, Zhenling; Christie, Peter; Zhang, Fusuo [College of Resources and Environmental Sciences, China Agricultural University, Beijing 100193 (China); Vitousek, Peter [Department of Biology, Stanford University, Stanford, California 94305 (United States); Erisman, Jan Willem [VU University Amsterdam, 1081 HV Amsterdam (Netherlands); Goulding, Keith [The Sustainable Soils and Grassland Systems Department, Rothamsted Research, Harpenden AL5 2JQ (United Kingdom); Fangmeier, Andreas [Institute of Landscape and Plant Ecology, University of Hohenheim, 70593 Stuttgart (Germany)

2013-02-28

China is experiencing intense air pollution caused in large part by anthropogenic emissions of reactive nitrogen. These emissions result in the deposition of atmospheric nitrogen (N) in terrestrial and aquatic ecosystems, with implications for human and ecosystem health, greenhouse gas balances and biological diversity. However, information on the magnitude and environmental impact of N deposition in China is limited. Here we use nationwide data sets on bulk N deposition, plant foliar N and crop N uptake (from long-term unfertilized soils) to evaluate N deposition dynamics and their effect on ecosystems across China between 1980 and 2010. We find that the average annual bulk deposition of N increased by approximately 8 kilograms of nitrogen per hectare (P < 0.001) between the 1980s (13.2 kilograms of nitrogen per hectare) and the 2000s (21.1 kilograms of nitrogen per hectare). Nitrogen deposition rates in the industrialized and agriculturally intensified regions of China are as high as the peak levels of deposition in northwestern Europe in the 1980s, before the introduction of mitigation measures. Nitrogen from ammonium (NH4+) is the dominant form of N in bulk deposition, but the rate of increase is largest for deposition of N from nitrate (NO3-), in agreement with decreased ratios of NH3 to NOx emissions since 1980. We also find that the impact of N deposition on Chinese ecosystems includes significantly increased plant foliar N concentrations in natural and semi-natural (that is, non-agricultural) ecosystems and increased crop N uptake from long-term-unfertilized croplands. China and other economies are facing a continuing challenge to reduce emissions of reactive nitrogen, N deposition and their negative effects on human health and the environment.

We Don’t Want to Be Officially Certified! Reasons and Implications of the Participatory Guarantee Systems

Directory of Open Access Journals (Sweden)

Mamen Cuéllar-Padilla

2018-04-01

Full Text Available Official organic regulation in Europe is based on the third-party certification system to guarantee organic products. Many critics and dissatisfactions have motivated the emergence of other guarantee systems, based on an intense implication of producers and, in some cases, consumers and other local actors, involved in localised agri-food systems. They are called Participatory Guarantee Systems (PGS, and are not recognised as valid guarantee systems by the official organic regulation. In the present paper, we analyse the main differences between the PGS and the third party certification system, deepening on their differentiated social and political implications. We conclude that the procedures behind PGS generate numerous positive impacts in the territories related to local producers (and consumers empowerment and localised agri-food systems drive, while their implications make them not considered as a substitute to third party certification system, unless certain conditions of social consolidated groups and agroecological and food sovereignty perspective of food system take place.

Deposition characteristics of titanium coating deposited on SiC fiber by cold-wall chemical vapor deposition

Energy Technology Data Exchange (ETDEWEB)

Luo, Xian, E-mail: luo_shenfan@hotmail.com; Wu, Shuai; Yang, Yan-qing; Jin, Na; Liu, Shuai; Huang, Bin

2016-12-01

The deposition characteristics of titanium coating on SiC fiber using TiCl{sub 4}-H{sub 2}-Ar gas mixture in a cold-wall chemical vapor deposition were studied by the combination of thermodynamic analysis and experimental studies. The thermodynamic analysis of the reactions in the TiCl{sub 4}-H{sub 2}-Ar system indicates that TiCl{sub 4} transforms to titanium as the following paths: TiCl{sub 4} → TiCl{sub 3} → Ti, or TiCl{sub 4} → TiCl{sub 3} → TiCl{sub 2} → Ti. The experimental results show that typical deposited coating contains two distinct layers: a TiC reaction layer close to SiC fiber and titanium coating which has an atomic percentage of titanium more than 70% and that of carbon lower than 30%. The results illustrate that a carbon diffusion barrier coating needs to be deposited if pure titanium is to be prepared. The deposition rate increases with the increase of temperature, but higher temperature has a negative effect on the surface uniformity of titanium coating. In addition, appropriate argon gas flow rate has a positive effect on smoothing the surface morphology of the coating. - Highlights: • Both thermodynamic analysis and experimental studies were adopted in this work. • The transformation paths of TiCl{sub 4} to Ti is: TiCl{sub 4} → TiCl{sub 3} → Ti, or TiCl{sub 4} → TiCl{sub 3} → TiCl{sub 2} → Ti. • Typical deposited Ti coating on SiC fiber contained two distinct layers. • Deposition temperature is important on deposition rate and morphologies. • Appropriate argon gas flow rate has a positive effect on smoothing of the coating.

Uraniferous surficial deposits

International Nuclear Information System (INIS)

Toens, P.D.; Hambleton-Jones, B.B.

1980-10-01

As a result of the discovery of uranium in surficial deposits of Tertiary to Recent age, in Australia and Southern Africa, increasing attention is being paid to the location and understanding of the genesis of these deposits. The paper discusses the definitions and terminology currently in use and a classification of these deposits is presented. It is concluded that in order to obtain a measure of clarity, the terms calcrete, gypcrete and dolocrete should not be used to describe the uraniferous valley-fill deposits of Southern Africa and Australia [af

Administrative Circular No. 13 (Rev. 4) - Guarantees for representatives of the personnel

CERN Multimedia

Department Head Office - HR Department

2016-01-01

Administrative Circular No. 13 (Rev. 4) entitled "Guarantees for representatives of the personnel", approved by the Director-General following discussion in the Standing Concertation Committee meeting on 22 March 2016, will be available on 1st September 2016 via the following link: https://cds.cern.ch/record/2208527.   This revised circular cancels and replaces Administrative Circular No. 13 (Rev. 3) also entitled "Guarantees for representatives of the personnel" of January 2014. This document contains a single change to reflect the terminology under the new career structure: the term "career path" is replaced by "grade". This circular will enter into force on 1st September 2016.

Diluent changes the physicochemical and electrochemical properties of the electrophoretically-deposited layers of carbon nanotubes

Energy Technology Data Exchange (ETDEWEB)

Benko, Aleksandra, E-mail: akbenko@gmail.com [AGH University of Science and Technology, Faculty of Materials Science and Ceramics, A. Mickiewicza 30 Ave., 30-059, Krakow (Poland); Nocuń, Marek [AGH University of Science and Technology, Faculty of Materials Science and Ceramics, A. Mickiewicza 30 Ave., 30-059, Krakow (Poland); Berent, Katarzyna; Gajewska, Marta [AGH University of Science and Technology, Academic Centre for Materials and Nanotechnology, A. Mickiewicza 30 Ave, 30-059, Krakow (Poland); Klita, Łukasz; Wyrwa, Jan; Błażewicz, Marta [AGH University of Science and Technology, Faculty of Materials Science and Ceramics, A. Mickiewicza 30 Ave., 30-059, Krakow (Poland)

2017-05-01

Highlights: • Different properties of the EPD-deposited CNTs layers may be altered by changing the applied solvent. • More conductive solvents guarantee higher values of the recorded current densities, increasing kinetics of the deposition and yielding layers of higher thicknesses. • In a less conductive, organic medium, mobility of the particles is reduced, allowing for optimal packing and densification of the CNTs layer. • Proper solvent selection in the EPD of CNTs may lead to obtainment of CNTs—substrate materials with conductivity that is superior to an unmodified substrate. - Abstract: Coating the material of choice with a layer of well-adhered carbon nanotubes is a subject of interest in many fields of materials science and industry. Electrophoretic deposition is one of the methods to handle this challenging task. In this process, careful designing of the deposition parameters is crucial in obtaining the product of strictly desired properties. This study was aimed to identify the influence of the diluent on the physicochemical ad electrochemical qualities of the final product. By analyzing the properties of the suspensions being used, we were able to hypothesize on the mechanisms of carbon nanotubes—liquid interactions and their outcome on the thickness, homogeneity, chemical and structural composition and electrical conductivity of the metal substrate covered with a layer of carbon nanotubes. We obtained a materials, composed of metal and a layer of CNTs, with conductivity that is superior to an unmodified metal. This types of materials may find numerous applications in fabrication of novel electronic devices, including the implantable electrodes for biomedicine—as reported in our previous studies, these types of coating are biocompatible.

L’evolució del garantisme: de les garanties personals a la garantia de l’estat - The Evolution of Constitutional Guarantees: from personal guarantees to guaranteeing the State - La evolución del garantismo: de las garantías personales a la garantía del Estado

Directory of Open Access Journals (Sweden)

José Esteve Pardo

2013-06-01

Full Text Available La reforma constitucional per a l’estabilitat pressupostària i la contenció del dèficitLa reforma de l’article 135 de la Constitució és un moviment inèdit en el constitucionalisme, ja que per primera vegada s’orienta cap a la protecció del mateix Estat, a la sostenibilitat, davant l’exposició excessiva al crèdit extern. Les garanties constitucionals van ser primer garanties de llibertats personals, després garanties d’institucions de l’Estat o de la societat i ara, per primera vegada, garanties del mateix Estat. The Constitutional Amendment for Budgetary Stability and Deficit RestraintThe amendment of article 135 of the Constitution highlights a constitutionally unprecedented movement toward protection of the State, the State´s self-protection against external credit. Constitutional guarantees were originally guarantees of personal liberties, then guarantees of the institutions of the State or civil society, and are now for the first time self-guarantees of the State.La reforma constitucional para la estabilidad presupuestaria y contención del déficitLa reforma del artículo 135 de la Constitución es un movimiento inédito en el constitucionalismo puesto que por vez primera se orienta a la protección del propio Estado, a su sostenibilidad, ante la excesiva exposición al crédito externo. Las garantías constitucionales fueron primero garantías de libertades personales, luego garantías de instituciones del Estado o de la sociedad y ahora, por vez primera, garantías del propio Estado.

22 CFR 213.3 - Loans, guarantees, sovereign and interagency claims.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Loans, guarantees, sovereign and interagency claims. 213.3 Section 213.3 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT CLAIMS COLLECTION... thereof, or any public international organization; (d) Claims where the CFO determines that the...

Implementation of Guaranteed Services in the MANGO Clockless Network-on-Chip

DEFF Research Database (Denmark)

Bjerregaard, Tobias; Sparsø, Jens

2006-01-01

(clockless implementation, standard socket access points, and guaranteed communication services) make MANGO suitable for a modular SoC design flow is explained. Among the advantages of using clockless circuit techniques are inherent global timing closure, low forward latency in pipelines, and zero dynamic......Shared, segmented, on-chip interconnection networks, known as networks-on-chip (NoC), may become the preferred way of interconnecting intellectual property (IP) cores in future giga-scale system-on-chip (SoC) designs. A NoC can provide the required communication bandwidth while accommodating...... the effects of scaling microchip technologies. Equally important, a NoC facilitates a truly modular and scalable design flow. The MANGO (message-passing asynchronous network-on-chip providing guaranteed services over open core protocol (OCP) interfaces) NoC is presented, and how its key characteristics...

Guaranteed cost control of polynomial fuzzy systems via a sum of squares approach.

Science.gov (United States)

Tanaka, Kazuo; Ohtake, Hiroshi; Wang, Hua O

2009-04-01

This paper presents the guaranteed cost control of polynomial fuzzy systems via a sum of squares (SOS) approach. First, we present a polynomial fuzzy model and controller that are more general representations of the well-known Takagi-Sugeno (T-S) fuzzy model and controller, respectively. Second, we derive a guaranteed cost control design condition based on polynomial Lyapunov functions. Hence, the design approach discussed in this paper is more general than the existing LMI approaches (to T-S fuzzy control system designs) based on quadratic Lyapunov functions. The design condition realizes a guaranteed cost control by minimizing the upper bound of a given performance function. In addition, the design condition in the proposed approach can be represented in terms of SOS and is numerically (partially symbolically) solved via the recent developed SOSTOOLS. To illustrate the validity of the design approach, two design examples are provided. The first example deals with a complicated nonlinear system. The second example presents micro helicopter control. Both the examples show that our approach provides more extensive design results for the existing LMI approach.

[Packaging: the guarantee of medicinal quality].

Science.gov (United States)

Chaumeil, J-C

2003-01-01

Primary packaging guarantees the pharmaceutical quality of the medicinal preparation received by the patient. Glass bottles containing parenteral solutions for example ensure that sterility, quality and optimal stability are preserved until administration. Recent innovations in materials research has lead to improvements in parenteral infusions. Multicompartmental bags, allowing extemporaneous mixtures without opening the container, constitute an extremely beneficial advance for the patient, allowing administration of mixtures with solutions and emulsions which would be unstable if stored. Metered dose pressurized inhalers are an excellent example of drug administration devices designed specifically to ensure quality and bioavailability. These examples illustrate the important role of primary packaging and demonstrate the usefulness of research and development in this area.

Negative responses of Collembola in a forest soil (Alptal, Switzerland) under experimentally increased N deposition

International Nuclear Information System (INIS)

Xu Guoliang; Schleppi, Patrick; Li Maihe; Fu Shenglei

2009-01-01

The response of specific groups of organisms, like Collembola to atmospheric nitrogen (N) deposition is still scarcely known. We investigated the Collembola community in a subalpine forest (Alptal, Switzerland) as subjected for 12 years to an experimentally increased N deposition (+25 on top of ambient 12 kg N ha -1 year -1 ). In the 0-5 cm soil layer, there was a tendency of total Collembola densities to be lower in N-treated than in control plots. The density of Isotomiella minor, the most abundant species, was significantly reduced by the N addition. A tendency of lower Collembola group richness was observed in N-treated plots. The Density-Group index (d DG ) showed a significant reduction of community diversity, but the Shannon-Wiener index (H') was not significantly affected by the N addition. The Collembola community can be considered as a bioindicator of N inputs exceeding the biological needs, namely, soil N saturation. - Collembola community, which was significantly affected by a long-term N addition experiment, can be considered as a bioindicator of N saturation.

Negative responses of Collembola in a forest soil (Alptal, Switzerland) under experimentally increased N deposition

Energy Technology Data Exchange (ETDEWEB)

Xu Guoliang, E-mail: xugl@scbg.ac.c [Institute of Ecology, South China Botanical Garden, Chinese Academy of Sciences, Guangzhou 510650 (China); Schleppi, Patrick; Li Maihe [Swiss Federal Institute for Forest, Snow and Landscape Research, CH-8903 Birmensdorf (Switzerland); Fu Shenglei, E-mail: sfu@scib.ac.c [Institute of Ecology, South China Botanical Garden, Chinese Academy of Sciences, Guangzhou 510650 (China)

2009-07-15

The response of specific groups of organisms, like Collembola to atmospheric nitrogen (N) deposition is still scarcely known. We investigated the Collembola community in a subalpine forest (Alptal, Switzerland) as subjected for 12 years to an experimentally increased N deposition (+25 on top of ambient 12 kg N ha{sup -1} year{sup -1}). In the 0-5 cm soil layer, there was a tendency of total Collembola densities to be lower in N-treated than in control plots. The density of Isotomiella minor, the most abundant species, was significantly reduced by the N addition. A tendency of lower Collembola group richness was observed in N-treated plots. The Density-Group index (d{sub DG}) showed a significant reduction of community diversity, but the Shannon-Wiener index (H') was not significantly affected by the N addition. The Collembola community can be considered as a bioindicator of N inputs exceeding the biological needs, namely, soil N saturation. - Collembola community, which was significantly affected by a long-term N addition experiment, can be considered as a bioindicator of N saturation.

13 CFR 107.820 - Financings in the form of guarantees.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Financings in the form of... BUSINESS INVESTMENT COMPANIES Financing of Small Businesses by Licensees Structuring Licensee's Financing of Eligible Small Businesses: Types of Financing § 107.820 Financings in the form of guarantees. At...

Improvements Needed in Administration of the Guaranteed Student Loan Program.

Science.gov (United States)

General Accounting Office, Washington, DC.

This report identifies improvements needed in administration of the guaranteed student loan program. Improvements needed are based on the fact that that lenders are not informed when student borrowers drop out of school. Alternatives for providing lenders with timely information on enrollment terminations are indicated. Additional administrative…

Coverage and Rate of Downlink Sequence Transmissions with Reliability Guarantees

DEFF Research Database (Denmark)

Park, Jihong; Popovski, Petar

2017-01-01

Real-time distributed control is a promising application of 5G in which communication links should satisfy certain reliability guarantees. In this letter, we derive closed-form maximum average rate when a device (e.g. industrial machine) downloads a sequence of n operational commands through cell...

Formation, Sintering and Removal of Biomass Ash Deposits

DEFF Research Database (Denmark)

Laxminarayan, Yashasvi

conditions in laboratory-scale setups. Deposit formation was simulated in an Entrained Flow Reactor, to investigate the effect of operating conditions and ash chemistry on the rate of deposit formation. Experiments were performed using model biomass fly ash, prepared from mixtures of K2Si4O9, KCl, K2SO4, Ca....... Moreover, biomass ash deposits may cause severe corrosion of boiler surfaces. Therefore, reducing deposit formation and timely deposit removal are essential for optimal boiler operation. The formation, sintering and removal of boiler deposits has been investigated in this PhD project, by simulating boiler...... temperature increased the sticking probability of the fly ash particles/deposit surface, thereby increasing the rate of deposit formation. However, increasing flue gas velocity resulted in a decrease in the deposit formation rate, due to increased particle rebound. Furthermore, it was observed...

Energy deposited in the high luminosity inner triplets of the LHC by collision debris

International Nuclear Information System (INIS)

Wildner, E.; Broggi, F.; Cerutti, F.; Ferrari, A.; Hoa, C.; Koutchouk, J.-P.; Mokhov, N.V.

2008-01-01

The 14 TeV center of mass proton-proton collisions in the LHC produce not only debris interesting for physics but also showers of particles ending up in the accelerator equipment, in particular in the superconducting magnet coils. Evaluations of this contribution to the heat, that has to be transported by the cryogenic system, have been made to guarantee that the energy deposition in the superconducting magnets does not exceed limits for magnet quenching and the capacity of the cryogenic system. The models of the LHC base-line are detailed and include description of, for energy deposition, essential elements like beam-pipes and corrector magnets. The evaluations made using the Monte-Carlo code FLUKA are compared to previous studies using MARS. For the consolidation of the calculations, a dedicated comparative study of these two codes was performed for a reduced setup

GMG: A Guaranteed, Efficient Global Optimization Algorithm for Remote Sensing.

Energy Technology Data Exchange (ETDEWEB)

D' Helon, CD

2004-08-18

The monocular passive ranging (MPR) problem in remote sensing consists of identifying the precise range of an airborne target (missile, plane, etc.) from its observed radiance. This inverse problem may be set as a global optimization problem (GOP) whereby the difference between the observed and model predicted radiances is minimized over the possible ranges and atmospheric conditions. Using additional information about the error function between the predicted and observed radiances of the target, we developed GMG, a new algorithm to find the Global Minimum with a Guarantee. The new algorithm transforms the original continuous GOP into a discrete search problem, thereby guaranteeing to find the position of the global minimum in a reasonably short time. The algorithm is first applied to the golf course problem, which serves as a litmus test for its performance in the presence of both complete and degraded additional information. GMG is further assessed on a set of standard benchmark functions and then applied to various realizations of the MPR problem.

Studies on the performance guarantee for the engineering barrier system on geological disposal of high-level radioactive waste

International Nuclear Information System (INIS)

Kawakami, Susumu; Sugita, Yutaka; Kurihara, Yuji; Jintoku, Takashi; Taniguti, Naoki; Yui, Mikazu; Tanai, Kenji; Shibata, Masahiro; Honma, Nobuyuki

2003-03-01

In order to contribute to the safety standards and guidelines upon which a administration decides, examination for clarifying how to reflect the result obtained by future R and D was performed. From a viewpoint of the long-term safety on geological disposal, the items which should guarantee the performance of each element which constitutes disposal institutions (by this report, they are the overpack and the buffer material) were extracted, and it was shown what a performance guarantee is concretely offered about these items. Furthermore, based on the H12 report as a situation of present R and D for a method of a performance guarantee, the subjects considered that a future R and D is required were extracted. Moreover, the items of a safety standard and guideline were assumed, and the relation between these items and a performance guarantee items was arranged. One arrangement for clarifying whether to be reflected in the safety regulations and guidelines whose R and D subjects extracted from the performance guarantee items was shown. (author)

13 CFR 108.820 - Financings in the form of guarantees.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Financings in the form of... VENTURE CAPITAL (âNMVCâ) PROGRAM Financing of Small Businesses by NMVC Companies Structuring Nmvc Company's Financing of Eligible Small Businesses § 108.820 Financings in the form of guarantees. (a) General...

Proposal of a control and quality guarantee program in radiotherapy and radiodiagnosis

International Nuclear Information System (INIS)

Tovar Rodas, J.A.

1998-01-01

In Guatemala, as regards guarantee and control of quality in the radiotherapy and radiodiagnostic areas, doesn't have until the moment, properly established, an action plan to carry out in systematic form, a program that it satisfies the design requirements and operation in an installation of this nature. However, it is well-known that the techniques that involve the employment of the ionizing radiations are powerful tools for their applications in industry, investigation and medicine; their use should be optimized and the associate risks should be evaluated to prevent them and to limit them. At the moment, the first actions of a guarantee program and quality control are carried out in the radiotherapy area for the intervention of the Secondary Laboratory of Dosimetric Calibration, but the quick growth of this area and the high number of radiodiagnosis facilities that work in the country, they outline the necessity to develop a methodology that solves the problem that is presented by the lack of controls of quality in these practices partly. The present work, presents in first plane the objectives, antecedents, forms of development, available resources and the necessities that are had in each area for the setting in march of the Quality Guarantee Program in Radiotherapy and of the Quality Control Program in Radiodiagnosis

Modelling and analyses do not support the hypothesis that charging by power-line corona increases lung deposition of airborne particles

International Nuclear Information System (INIS)

Jeffers, D.

2007-01-01

The National Radiological Protection Board's advisory Group on Non-ionising Radiation has recommended further study on the effects of electric charge on the deposition of 0.005-1 μm particles in the lung. Estimates have been made regarding the integrated ion exposure within the corona plume generated by a power line and by ionizers in an intensive care unit. Changes in the charge state of particles with sizes in the range 0.02-13 μm have been calculated for these exposures. The corona plume increases the charge per particle of 0.02 and 0.1 μm particles by the order of 0.1. The ionizers in the intensive care unit produced negative ions-as do power lines under most conditions. Bacteria can carry in the order of 1000 charges (of either sign) and it is shown that the repulsion between such a negatively charged bacterium and negative ions prevents further ion deposition by diffusion charging. Positively charged bacteria can, however, be discharged by the ions which are attracted to them. The data provide no support for the hypothesis that ion exposure, at the levels considered, can increase deposition in the lung. (authors)

Energy deposition of heavy ions in the regime of strong beam-plasma correlations.

Science.gov (United States)

Gericke, D O; Schlanges, M

2003-03-01

The energy loss of highly charged ions in dense plasmas is investigated. The applied model includes strong beam-plasma correlation via a quantum T-matrix treatment of the cross sections. Dynamic screening effects are modeled by using a Debye-like potential with a velocity dependent screening length that guarantees the known low and high beam velocity limits. It is shown that this phenomenological model is in good agreement with simulation data up to very high beam-plasma coupling. An analysis of the stopping process shows considerably longer ranges and a less localized energy deposition if strong coupling is treated properly.

13 CFR 120.520 - Purchase of 7(a) loan guarantees.

Science.gov (United States)

2010-01-01

... condition of the collateral, plans for any type of loan workout or loan restructuring, existing liquidation activities including the sale of loan collateral, or the status of ongoing foreclosure proceedings. The... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Purchase of 7(a) loan guarantees...

H 2 guaranteed cost control of discrete linear systems

Directory of Open Access Journals (Sweden)

Colmenares W.

2000-01-01

Full Text Available This paper presents necessary and sufficient conditions for the existence of a quadratically stabilizing output feedback controller which also assures H 2 guaranteed cost performance on a discrete linear uncertain system where the uncertainty is of the norm bounded type. The conditions are presented as a collection of linear matrix inequalities.The solution, however requires a search over a scalar parameter space.

Enhanced nitrogen deposition exacerbates the negative effect of increasing background ozone in Dactylis glomerata, but not Ranunculus acris

Energy Technology Data Exchange (ETDEWEB)

Wyness, Kirsten, E-mail: kirnes@ceh.ac.uk [Centre for Ecology and Hydrology (CEH), Environment Centre Wales, Deiniol Road, Bangor LL57 2UW (United Kingdom); Newcastle Institute for Research on the Environment and Sustainability - NIRES, Devonshire Building, Newcastle University, Newcastle Upon Tyne NE1 7RU (United Kingdom); Mills, Gina; Jones, Laurence [Centre for Ecology and Hydrology (CEH), Environment Centre Wales, Deiniol Road, Bangor LL57 2UW (United Kingdom); Barnes, Jeremy D. [Newcastle Institute for Research on the Environment and Sustainability - NIRES, Devonshire Building, Newcastle University, Newcastle Upon Tyne NE1 7RU (United Kingdom); Jones, Davey L. [School of the Environment and Natural Resources, Bangor University, Bangor, Gwynedd LL57 2UW (United Kingdom)

2011-10-15

The combined impacts of simulated increased nitrogen (N) deposition (75 kg N ha{sup -1} yr{sup -1}) and increasing background ozone (O{sub 3}) were studied using two mesotrophic grassland species (Dactylis glomerata and Ranunculus acris) in solardomes, by means of eight O{sub 3} treatments ranging from 15.5 ppb to 92.7 ppb (24 h average mean). A-C{sub i} curves were constructed for each species to gauge effects on photosynthetic efficiency and capacity, and effects on biomass partitioning were determined after 14 weeks. Increasing the background concentration of O{sub 3} reduced the healthy above ground and root biomass of both species, and increased senesced biomass. N fertilisation increased biomass production in D. glomerata, and a significantly greater than additive effect of O{sub 3} and N on root biomass was evident. In contrast, R. acris biomass was not affected by high N. The study shows the combined effects of these pollutants have differential implications for carbon allocation patterns in common grassland species. - Highlights: > Dactylis glomerata and Ranunculus acris enhanced senescence with increasing O{sub 3}. > Ozone effects on root biomass were larger than on shoot biomass in both species. > N deposition exacerbated the negative O{sub 3} effect on D. glomerata root biomass. > Inter-specific differences in the response to O{sub 3} and N combined exposure. - Synergistic effects of elevated O{sub 3} and N were observed in below ground C-partitioning in the grass Dactylis glomerata, but not in the forb Ranunculus acris.

Shedding of ash deposits

DEFF Research Database (Denmark)

Zbogar, Ana; Frandsen, Flemming; Jensen, Peter Arendt

2009-01-01

Ash deposits formed during fuel thermal conversion and located on furnace walls and on convective pass tubes, may seriously inhibit the transfer of heat to the working fluid and hence reduce the overall process efficiency. Combustion of biomass causes formation of large quantities of troublesome...... ash deposits which contain significant concentrations of alkali, and earth-alkali metals. The specific composition of biomass deposits give different characteristics as compared to coal ash deposits, i.e. different physical significance of the deposition mechanisms, lower melting temperatures, etc....... Low melting temperatures make straw ashes especially troublesome, since their stickiness is higher at lower temperatures, compared to coal ashes. Increased stickiness will eventually lead to a higher collection efficiency of incoming ash particles, meaning that the deposit may grow even faster...

78 FR 13999 - Maximum Interest Rates on Guaranteed Farm Loans

Science.gov (United States)

2013-03-04

..., cost-plus, flat-rate, or market based) to price guaranteed loans, provided the rates do not exceed the... (LIBOR) or the 5-year Treasury note rate, unless the lender uses a formal written risk-based pricing... cost in the form of a lower interest rate than the borrower would otherwise receive. Therefore, the FSA...

7 CFR 762.129 - Percent of guarantee and maximum loss.

Science.gov (United States)

2010-01-01

... loss. (a) General. The percent of guarantee will not exceed 90 percent based on the credit risk to the lender and the Agency both before and after the transaction. The Agency will determine the percentage of... PLP lenders will not be less than 80 percent. (d) Maximum loss. The maximum amount the Agency will pay...

Organic Law Of Judicial Guarantees And Constitutional Control

Directory of Open Access Journals (Sweden)

Ernesto López Freire

2013-01-01

Full Text Available This paper demonstrates the various unconstitutional and fallacies of the Organic Law of Judicial guarantees and Constitutional Control. For that, there will be a comprehensive collation between the mentioned law and the Constitution of the Republic of Ecuador and force. Through this analysis shows a lack of knowledge of Ecuadorian law or legal science by their authors. This study elucidated, inter alia, the inconsistencies in matters relating to the interpretation of constitutional provisions, full compensation, material and integral; challenge administrative acts, judicial unit.

Cobalt—Styles of deposits and the search for primary deposits

Science.gov (United States)

Hitzman, Murray W.; Bookstrom, Arthur A.; Slack, John F.; Zientek, Michael L.

2017-11-30

Cobalt (Co) is a potentially critical mineral. The vast majority of cobalt is a byproduct of copper and (or) nickel production. Cobalt is increasingly used in magnets and rechargeable batteries. More than 50 percent of primary cobalt production is from the Central African Copperbelt. The Central African Copperbelt is the only sedimentary rock-hosted stratiform copper district that contains significant cobalt. Its presence may indicate significant mafic-ultramafic rocks in the local basement. The balance of primary cobalt production is from magmatic nickel-copper and nickel laterite deposits. Cobalt is present in several carbonate-hosted lead-zinc and copper districts. It is also variably present in Besshi-type volcanogenic massive sulfide and siliciclastic sedimentary rock-hosted deposits in back arc and rift environments associated with mafic-ultramafic rocks. Metasedimentary cobalt-copper-gold deposits (such as Blackbird, Idaho), iron oxide-copper-gold deposits, and the five-element vein deposits (such as Cobalt, Ontario) contain different amounts of cobalt. None of these deposit types show direct links to mafic-ultramafic rocks; the deposits may result from crustal-scale hydrothermal systems capable of leaching and transporting cobalt from great depths. Hydrothermal deposits associated with ultramafic rocks, typified by the Bou Azzer district of Morocco, represent another type of primary cobalt deposit.In the United States, exploration for cobalt deposits may focus on magmatic nickel-copper deposits in the Archean and Proterozoic rocks of the Midwest and the east coast (Pennsylvania) and younger mafic rocks in southeastern and southern Alaska; also, possibly basement rocks in southeastern Missouri. Other potential exploration targets include—The Belt-Purcell basin of British Columbia (Canada), Idaho, Montana, and Washington for different styles of sedimentary rock-hosted cobalt deposits;Besshi-type VMS deposits, such as the Greens Creek (Alaska) deposit and

Using Multiple Paths in NoCs for Guaranteed Resource Allocation and Improved Best Effort Performance in NoCs.

NARCIS (Netherlands)

Ovadia, I.; Ha, Y.; Corporaal, H.

2005-01-01

Networks-on-Chips (NoCs) provide communication platforms to Systems-on-Chips (SoCs). In NoCs, channels are generally shared between traffic flows, resulting in contention. However, certain flows require delivery guarantees. Differentiated quality-of-service (QoS) is achieved by providing guaranteed

Using Kalman Filter to Guarantee QoS Robustness of Web Server

Institute of Scientific and Technical Information of China (English)

无

2006-01-01

The exponential growth of the Internet coupled with the increasing popularity of dynamically generated content on the World Wide Web, has created the need for more and faster Web servers capable of serving the over 100 million Internet users. To converge the control method has emerged as a promising technique to solve the Web QoS problem. In this paper, a model of adaptive session is presented and a session flow self-regulating algorism based on Kalman Filter are proposed towards Web Server. And a Web QoS self-regulating scheme is advanced. To attain the goal of on-line system identification, the optimized estimation of QoS parameters is fulfilled by utilizing Kalman Filter in full domain. The simulation results shows that the proposed scheme can guarantee the QoS with both robustness and stability .

Guaranteed Cost Fault-Tolerant Control for Networked Control Systems with Sensor Faults

Directory of Open Access Journals (Sweden)

Qixin Zhu

2015-01-01

Full Text Available For the large scale and complicated structure of networked control systems, time-varying sensor faults could inevitably occur when the system works in a poor environment. Guaranteed cost fault-tolerant controller for the new networked control systems with time-varying sensor faults is designed in this paper. Based on time delay of the network transmission environment, the networked control systems with sensor faults are modeled as a discrete-time system with uncertain parameters. And the model of networked control systems is related to the boundary values of the sensor faults. Moreover, using Lyapunov stability theory and linear matrix inequalities (LMI approach, the guaranteed cost fault-tolerant controller is verified to render such networked control systems asymptotically stable. Finally, simulations are included to demonstrate the theoretical results.

Increasing the production yield of recombinant protein in transgenic seeds by expanding the deposition space within the intracellular compartment

OpenAIRE

Takaiwa, Fumio

2013-01-01

Seeds must maintain a constant level of nitrogen in order to germinate. When recombinant proteins are produced while endogenous seed protein expression is suppressed, the production levels of the foreign proteins increase to compensate for the decreased synthesis of endogenous proteins. Thus, exchanging the production of endogenous seed proteins for that of foreign proteins is a promising approach to increase the yield of foreign recombinant proteins. Providing a space for the deposition of r...

Learning from label proportions in brain-computer interfaces: Online unsupervised learning with guarantees

Science.gov (United States)

Verhoeven, Thibault; Schmid, Konstantin; Müller, Klaus-Robert; Tangermann, Michael; Kindermans, Pieter-Jan

2017-01-01

Objective Using traditional approaches, a brain-computer interface (BCI) requires the collection of calibration data for new subjects prior to online use. Calibration time can be reduced or eliminated e.g., by subject-to-subject transfer of a pre-trained classifier or unsupervised adaptive classification methods which learn from scratch and adapt over time. While such heuristics work well in practice, none of them can provide theoretical guarantees. Our objective is to modify an event-related potential (ERP) paradigm to work in unison with the machine learning decoder, and thus to achieve a reliable unsupervised calibrationless decoding with a guarantee to recover the true class means. Method We introduce learning from label proportions (LLP) to the BCI community as a new unsupervised, and easy-to-implement classification approach for ERP-based BCIs. The LLP estimates the mean target and non-target responses based on known proportions of these two classes in different groups of the data. We present a visual ERP speller to meet the requirements of LLP. For evaluation, we ran simulations on artificially created data sets and conducted an online BCI study with 13 subjects performing a copy-spelling task. Results Theoretical considerations show that LLP is guaranteed to minimize the loss function similar to a corresponding supervised classifier. LLP performed well in simulations and in the online application, where 84.5% of characters were spelled correctly on average without prior calibration. Significance The continuously adapting LLP classifier is the first unsupervised decoder for ERP BCIs guaranteed to find the optimal decoder. This makes it an ideal solution to avoid tedious calibration sessions. Additionally, LLP works on complementary principles compared to existing unsupervised methods, opening the door for their further enhancement when combined with LLP. PMID:28407016

Increase in carbon accumulation in a boreal peatland following a period of wetter climate and long-term decrease in nitrogen deposition.

Science.gov (United States)

Utstøl-Klein, Simon; Halvorsen, Rune; Ohlson, Mikael

2015-06-01

Rates of peat growth and carbon (C) accumulation in a Sphagnum-dominated boreal peatland in south-east Norway were compared over two time periods each 17 yr long, that is, an earlier period from 1978 to 1995 and a recent period from 1995 to 2012. Our research was based on 109 peat cores. By using exactly the same study area and sampling protocols to obtain data for the two time periods, we were able to obtain a clear picture of the spatio-temporal patterns of peat accumulation. We show that peat growth and C accumulation were significantly higher in the recent than in the earlier time period. Interestingly, nitrogen (N) deposition was lower in the recent than in the earlier time period, while precipitation increased in the recent time period. Temperatures did not show any consistent trends over the time periods. Although our data do not allow assessment of the relative importance of declining N deposition vs increasing precipitation as drivers of peat accumulation, our results suggest that peatland C sequestration is not significantly inhibited by N pollution at current precipitation and N deposition levels. © 2015 The Authors. New Phytologist © 2015 New Phytologist Trust.

Development Concept of Guaranteed Verification Electric Power System Simulation Tools and Its Realization

Directory of Open Access Journals (Sweden)

Gusev Alexander

2015-01-01

Full Text Available The analysis of existing problem reliability and verification of widespread electric power systems (EPS simulation tools is presented in this article. Everything simulation tools are based on the using of numerical methods for ordinary differential equations. Described the concept of guaranteed verification EPS simulation tools and the structure of its realization are based using the Simulator having properties of continuous , without decomposition three-phase EPS simulation in real time and on an unlimited range with guaranteed accuracy. The information from the Simulator can be verified by using data only quasi-steady-state regime received from the SCADA and such Simulator can be applied as the standard model for verification any EPS simulation tools.

Pricing Rate of Return Guarantees in Regular Premium Unit Linked Insurance

NARCIS (Netherlands)

Schrager, D.F.; Pelsser, A.

2004-01-01

We derive general pricing formulas for Rate of Return Guarantees in Regular Premium Unit Linked Insurance under stochastic interest rates. Our main contribution focusses on the effect of stochastic interest rates. First, we show the effect of stochastic interest rates can be interpreted as, what is

The Social and Consumer Standards and Guarantees in Ukraine: the Current Structural and Dynamic Characteristics

Directory of Open Access Journals (Sweden)

Kolesov Oleksandr S.

2017-04-01

Full Text Available The article attempts to generalize the theoretical approaches to the social guarantees and standards as economic categories. The classification of social guarantees is provided. The dynamic parameters for development of the social and consumer standards adopted in Ukraine were considered. An evaluation of the real poverty level under the system of criteria was carried out. The inconsistency of methods for the poverty evaluation adopted by the Ministry of Social Policy of Ukraine and contradiction of its individual indicators has been indicated. The structural characteristics of the population’s income have been determined. The relevance of the existing social guarantees to their real value in today’s economic conditions have been analyzed. Tendencies of falling of the welfare level of population, resulting in a decline in the consumer demand and a narrowing of the domestic market for goods and services, have been identified. The need to take measures to stimulate small businesses, to overcome corruption, and to deregulate the economy has been indicated.

Fair Valuation of Guaranteed Contracts : The Interaction Between Assets and Liabilities

NARCIS (Netherlands)

Charlier, E.; Kleynen, R.H.M.A.

2005-01-01

In this paper we study the investment behavior of an insurance company consisting of policy and equity holders and issuing fair valued guaranteed contracts.Building up on the work of Briys and De Varenne (1997) and De Munnik and Schotman (1994) an intertemporal stochastic asset model and an interest

Potential of beta-adrenergic agonists for increasing protein deposition in ruminants in developing countries

International Nuclear Information System (INIS)

Berschauer, F.

1989-01-01

Various substituted phenylethanolamines, acting on the sympathetic nervous system, have been shown to increase protein retention (via decreased proteolysis) and reduce fat deposition (via increased lipolysis and reduced lipogenesis) in ruminants and monogastrics. Research with finishing lambs in developed countries show various beta-adrenergic agonists to improve growth rate (by 18%), feed conversion (by 12%) and carcass quality (28% increase in area of longissimus dorsi and 33% reduction in subcutaneous fat). Similar effects of beta-agonists on carcass composition of well fed cattle have been reported. The effects of beta-agonists on livestock in developing countries of the tropics have not yet been investigated, but their effects in increasing metabolic rate suggest that treated ruminants would be more vulnerable to hot environments. Beta-agonists appear to improve nitrogen retention to a greater extent in breeds with a lower potential for muscle growth. In view of this, they might be particularly effective in improving nitrogen retention in tropical breeds which have a low growth potential. This aspect, together with the response of undernourished animals in the developing countries, needs investigation. Beta-adrenergic agonists are not yet registered for use in animal production, but product licenses for some of them are expected to be granted soon. (author). 31 refs, 1 fig., 12 tabs

Robust Guaranteed Cost Observer Design for Singular Markovian Jump Time-Delay Systems with Generally Incomplete Transition Probability

Directory of Open Access Journals (Sweden)

Yanbo Li

2014-01-01

Full Text Available This paper is devoted to the investigation of the design of robust guaranteed cost observer for a class of linear singular Markovian jump time-delay systems with generally incomplete transition probability. In this singular model, each transition rate can be completely unknown or only its estimate value is known. Based on stability theory of stochastic differential equations and linear matrix inequality (LMI technique, we design an observer to ensure that, for all uncertainties, the resulting augmented system is regular, impulse free, and robust stochastically stable with the proposed guaranteed cost performance. Finally, a convex optimization problem with LMI constraints is formulated to design the suboptimal guaranteed cost filters for linear singular Markovian jump time-delay systems with generally incomplete transition probability.

The Impact of Financial Support System on Technology Innovation: A Case of Technology Guarantee System in Korea

Directory of Open Access Journals (Sweden)

Woo-Seok Jang

2008-04-01

Full Text Available We analyzed the impact of financial support system on technological innovation of small and medium manufacturing firms in Korea, with a special interest in technology guarantee system. This was done using a sample of 1,014 Korean manufacturing firms of which 43% were venture companies. Our study provides two important conclusions. First, the result of empirical analysis indicates that financial support systems have a significant influence on both product innovation and process innovation of SMEs in Korea. Second, a more important conclusion of this research is that technology guarantee system impacts on product innovation; however not on process innovation. This result implies that technology guarantee system attaches more importance to technological innovations related with product development than to those related with process enhancement.

Influence of deposition time on the properties of chemical bath deposited manganese sulfide thin films

Directory of Open Access Journals (Sweden)

Anuar Kassim

2010-12-01

Full Text Available Manganese sulfide thin films were chemically deposited from an aqueous solution containing manganese sulfate, sodium thiosulfate and sodium tartrate. The influence of deposition time (2, 3, 6 and 8 days on the properties of thin films was investigated. The structure and surface morphology of the thin films were studied by X-ray diffraction and atomic force microscopy, respectively. In addition, in order to investigate the optical properties of the thin films, the UV-visible spectrophotometry was used. The XRD results indicated that the deposited MnS2 thin films exhibited a polycrystalline cubic structure. The number of MnS2 peaks on the XRD patterns initially increased from three to six peaks and then decreased to five peaks, as the deposition time was increased from 2 to 8 days. From the AFM measurements, the film thickness and surface roughness were found to be dependent on the deposition time.

Deposition of insoluble elastin by pulmonary fibroblasts from patients with COPD is increased by treatment with versican siRNA

Directory of Open Access Journals (Sweden)

Wu L

2017-01-01

Full Text Available Lian Wu,1,2 Jing Zhang,3 Jie Ming Qu,4 Chun-xue Bai,3 Mervyn J Merrilees5 1Department of Community and Health Services, Unitec, 2Department of Pharmacology & Clinical Pharmacology, University of Auckland, Auckland, New Zealand; 3Department of Pulmonary Medicine, Zhongshan Hospital, Fudan University, 4Department of Pulmonary Medicine, Ruijin Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, People’s Republic of China; 5Department of Anatomy and Medical Imaging, University of Auckland, Auckland, New Zealand Abstract: A reduced content of alveolar elastic fibers is a key feature of COPD lung. Despite continued elastogenic potential by alveolar fibroblasts in the lung affected by COPD, repair of elastic fibers does not take place, which is due to increased levels of the chondroitin sulfate proteoglycan versican that inhibits the assembly of tropoelastin into fibers. In this study, primary pulmonary fibroblast cell lines from COPD and non-COPD patients were treated with a small interfering RNA (siRNA against versican to determine if knockdown of versican could restore the deposition of insoluble elastin. Versican siRNA treatment reduced versican expression and secretion by pulmonary fibroblasts from both COPD and non-COPD patients (P<0.01 and significantly increased deposition of insoluble elastin in the COPD cell cultures (P<0.05. The treatment, however, did not significantly affect production of soluble elastin (tropoelastin in either the COPD or non-COPD cell cultures, supporting a role for versican in inhibiting assembly but not synthesis of tropoelastin. These results suggest that removal or knockdown of versican may be a possible therapeutic strategy for increasing deposition of insoluble elastin and stimulating repair of elastic fibers in COPD lung. Keywords: pulmonary fibroblasts, COPD, elastin, versican

Deposition of insoluble elastin by pulmonary fibroblasts from patients with COPD is increased by treatment with versican siRNA.

Science.gov (United States)

Wu, Lian; Zhang, Jing; Qu, Jie Ming; Bai, Chun-Xue; Merrilees, Mervyn J

2017-01-01

A reduced content of alveolar elastic fibers is a key feature of COPD lung. Despite continued elastogenic potential by alveolar fibroblasts in the lung affected by COPD, repair of elastic fibers does not take place, which is due to increased levels of the chondroitin sulfate proteoglycan versican that inhibits the assembly of tropoelastin into fibers. In this study, primary pulmonary fibroblast cell lines from COPD and non-COPD patients were treated with a small interfering RNA (siRNA) against versican to determine if knockdown of versican could restore the deposition of insoluble elastin. Versican siRNA treatment reduced versican expression and secretion by pulmonary fibroblasts from both COPD and non-COPD patients ( P elastin in the COPD cell cultures ( P elastin (tropoelastin) in either the COPD or non-COPD cell cultures, supporting a role for versican in inhibiting assembly but not synthesis of tropoelastin. These results suggest that removal or knockdown of versican may be a possible therapeutic strategy for increasing deposition of insoluble elastin and stimulating repair of elastic fibers in COPD lung.

Urban wet deposition nitrate: a comparison to non-urban deposition

International Nuclear Information System (INIS)

Schultz, J.A.M.

1994-01-01

The concentration of nitrate in both wet and dry deposition has both increased historically and currently, and recently parallels emissions in NO x . Since NO x is produced in amounts comparable to SO 2 , it is an important contributor to acid deposition, and is produced in higher amounts in urban areas due to concentrated sources. Prior to to this study, national acid deposition monitoring networks in the United States have been and remain established in non-urban areas. This research study consisted of a comparison of precipitation sampling and analysis of wet deposition nitrate and pH for each deposition event in each of two urban sites over a 15 mo period. Also, a comparison of urban data and data generated at a nearby non-urban NADP site was made by examination of both monthly and seasonal data. This research suggests that national monitoring programs should consider inclusion of urban and non-urban monitoring sites in order to achieve a more representative regional assessment. 24 refs., 2 figs., 2 tabs

Cooperative Cloud Service Aware Mobile Internet Coverage Connectivity Guarantee Protocol Based on Sensor Opportunistic Coverage Mechanism

Directory of Open Access Journals (Sweden)

Qin Qin

2015-01-01

Full Text Available In order to improve the Internet coverage ratio and provide connectivity guarantee, based on sensor opportunistic coverage mechanism and cooperative cloud service, we proposed the coverage connectivity guarantee protocol for mobile Internet. In this scheme, based on the opportunistic covering rules, the network coverage algorithm of high reliability and real-time security was achieved by using the opportunity of sensor nodes and the Internet mobile node. Then, the cloud service business support platform is created based on the Internet application service management capabilities and wireless sensor network communication service capabilities, which is the architecture of the cloud support layer. The cooperative cloud service aware model was proposed. Finally, we proposed the mobile Internet coverage connectivity guarantee protocol. The results of experiments demonstrate that the proposed algorithm has excellent performance, in terms of the security of the Internet and the stability, as well as coverage connectivity ability.

Study of Allocation Guaranteed Time Slot Wireless Body Area Networks Based on IEEE 802.15.4

Science.gov (United States)

Yundra, E.; Harsono, G. D.

2018-04-01

This paper aims to determine the size of the Guaranteed Time Slot (GTS) on the super frame structure required for each sensor as well as to know the performance of the GTS resized system compared to the GTS standard on IEEE 802.15.4. This article proposes a scheme to improve IEEE 802.15.4 medium access control, called allocation Guaranteed Time Slot (ALGATIS). ALGATIS is expected to effectively allocate guaranteed time slot to the requested sensors, it adjusts the length of the slot in super frame duration based on the length of the packet data. This article presents a simulation experiment of IEEE 802.15.4, especially for star network, to predict the throughput of networks and average energy consumption. The simulation experiments show that the performance of ALGATIS is better than that of IEEE 802.15.4 standard in term of the throughput of networks and average energy consumption

Massive M2M Access with Reliability Guarantees in LTE Systems

DEFF Research Database (Denmark)

Madueño, Germán Corrales; Kiilerich Pratas, Nuno; Stefanovic, Cedomir

2015-01-01

Machine-to-Machine (M2M) communications are one of the major drivers of the cellular network evolution towards 5G systems. One of the key challenges is on how to provide reliability guarantees to each accessing device in a situation in which there is a massive number of almost-simultaneous arriva...

Effects of deposition time in chemically deposited ZnS films in acidic solution

Energy Technology Data Exchange (ETDEWEB)

Haddad, H.; Chelouche, A., E-mail: azeddinechelouche@gmail.com; Talantikite, D.; Merzouk, H.; Boudjouan, F.; Djouadi, D.

2015-08-31

We report an experimental study on the synthesis and characterization of zinc sulfide (ZnS) single layer thin films deposited on glass substrates by chemical bath deposition technique in acidic solution. The effect of deposition time on the microstructure, surface morphology, optical absorption, transmittance, and photoluminescence (PL) was investigated by X-ray diffraction (XRD), scanning electronic microscopy (SEM), UV-Vis–NIR spectrophotometry and photoluminescence (PL) spectroscopy. The results showed that the samples exhibit wurtzite structure and their crystal quality is improved by increasing deposition time. The latter, was found to affect the morphology of the thin films as showed by SEM micrographs. The optical measurements revealed a high transparency in the visible range and a dependence of absorption edge and band gap on deposition time. The room temperature PL spectra indicated that all ZnS grown thin films emit a UV and blue light, while the band intensities are found to be dependent on deposition times. - Highlights: • Single layer ZnS thin films were deposited by CBD in acidic solution at 95 °C. • The effect of deposition time was investigated. • Coexistence of ZnS and ZnO hexagonal structures for time deposition below 2 h • Thicker ZnS films were achieved after monolayer deposition for 5 h. • The highest UV-blue emission observed in thin film deposited at 5 h.

Administrative Circular No. 13 (Rev. 3) - Guarantees for representatives of the personnel

CERN Multimedia

2014-01-01

Administrative Circular No. 13 (Rev. 3) entitled “Guarantees for representatives of the personnel”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 5 December 2013 and entering into force on 1 January 2014, is available on the intranet site of the Human Resources Department (see here).   This circular is applicable to all members of the personnel. It cancels and replaces Administrative Circular No. 13 (Rev. 2) entitled “Guarantees for members of the personnel holding representative office” of November 1992. The circular was revised in order to adapt the time given to the representatives of the personnel to perform their elective mandate and to ensure more transparency in their activities, by indicating, inter alia, the percentage of time worked in the framework of their mandate, as well as the training, activities and ensuing results. Department Head Office HR Department

Decentralized guaranteed cost static output feedback vibration control for piezoelectric smart structures

International Nuclear Information System (INIS)

Jiang, Jian-ping; Li, Dong-xu

2010-01-01

This paper is devoted to the study of the decentralized guaranteed cost static output feedback vibration control for piezoelectric smart structures. A smart panel with collocated piezoelectric actuators and velocity sensors is modeled using a finite element method, and then the size of the model is reduced in the state space using the modal Hankel singular value. The necessary and sufficient conditions of decentralized guaranteed cost static output feedback control for the reduced system have been presented. The decentralized and centralized static output feedback matrices can be obtained from solving two linear matrix inequalities. A comparison between centralized control and decentralized control is performed in order to investigate their effectiveness in suppressing vibration of a smart panel. Numerical results show that when the system is subjected to initial displacement or white noise disturbance, the decentralized and centralized controls are both very effective and the control results are very close

Service Level Agreement for the QoS Guaranteed Mobile IPTV Services over Mobile WiMAX Networks

OpenAIRE

Chowdhury, Mostafa Zaman; Trung, Bui Minh; Jang, Yeong Min; Kim, Young-Il; Ryu, Won

2011-01-01

While mobile IPTV services are supported through the mobile WiMAX networks, there must need some guaranteed bandwidth for the IPTV services especially if IPTV and non-IPTV services are simultaneously supported by the mobile WiMAX networks. The quality of an IPTV service definitely depends on the allocated bandwidth for that channel. However, due to the high quality IPTV services and to support of huge non-IPTV traffic over mobile WiMAX networks, it is not possible to guarantee the sufficient ...

Optimal physiological structure of small neurons to guarantee stable information processing

Science.gov (United States)

Zeng, S. Y.; Zhang, Z. Z.; Wei, D. Q.; Luo, X. S.; Tang, W. Y.; Zeng, S. W.; Wang, R. F.

2013-02-01

Spike is the basic element for neuronal information processing and the spontaneous spiking frequency should be less than 1 Hz for stable information processing. If the neuronal membrane area is small, the frequency of neuronal spontaneous spiking caused by ion channel noise may be high. Therefore, it is important to suppress the deleterious spontaneous spiking of the small neurons. We find by simulation of stochastic neurons with Hodgkin-Huxley-type channels that the leakage system is critical and extremely efficient to suppress the spontaneous spiking and guarantee stable information processing of the small neurons. However, within the physiological limit the potassium system cannot do so. The suppression effect of the leakage system is super-exponential, but that of the potassium system is quasi-linear. With the minor physiological cost and the minimal consumption of metabolic energy, a slightly lower reversal potential and a relatively larger conductance of the leakage system give the optimal physiological structure to suppress the deleterious spontaneous spiking and guarantee stable information processing of small neurons, dendrites and axons.

Structural and Optical Properties of Chemical Bath Deposited Silver Oxide Thin Films: Role of Deposition Time

Directory of Open Access Journals (Sweden)

A. C. Nwanya

2013-01-01

Full Text Available Silver oxide thin films were deposited on glass substrates at a temperature of 50°C by chemical bath deposition technique under different deposition times using pure AgNO3 precursor and triethanolamine as the complexing agent. The chemical analysis based on EDX technique shows the presence of Ag and O at the appropriate energy levels. The morphological features obtained from SEM showed that the AgxO structures varied as the deposition time changes. The X-ray diffraction showed the peaks of Ag2O and AgO in the structure. The direct band gap and the refractive index increased as the deposition time increased and was in the range of 1.64–1.95 eV and 1.02–2.07, respectively. The values of the band gap and refractive index obtained indicate possible applications in photovoltaic and photothermal systems.

Mathematical geology studies of deposit prospect types

International Nuclear Information System (INIS)

Liu Guangping

1998-08-01

Exact certainty prospect type of uranium deposit, not only can assure the quality of deposit prospects, but also increase economic benefits. Based on the standard of geological prospect of uranium deposit, the author introduces a method of Fuzzy Synthetical Comment for dividing prospect type of uranium deposit. The practical applications demonstrate that the regression accuracy, discriminated by Zadeh operator, of 15 known deposits is 100%

Stress evaluation of chemical vapor deposited silicon dioxide films

International Nuclear Information System (INIS)

Maeda, Masahiko; Itsumi, Manabu

2002-01-01

Film stress of chemical vapor deposited silicon dioxide films was evaluated. All of the deposited films show tensile intrinsic stresses. Oxygen partial pressure dependence of the intrinsic stress is very close to that of deposition rate. The intrinsic stress increases with increasing the deposition rate under the same deposition temperature, and decreases with increasing substrate temperature. Electron spin resonance (ESR) active defects in the films were observed when the films were deposited at 380 deg. C and 450 deg. C. The ESR signal intensity decreases drastically with increasing deposition temperature. The intrinsic stress correlates very closely to the intensity of the ESR-active defects, that is, the films with larger intrinsic stress have larger ESR-active defects. It is considered that the intrinsic stress was generated because the voids caused by local bond disorder were formed during random network formation among the SiO 4 tetrahedra. This local bond disorder also causes the ESR-active defects

Guaranteeing the implementation of guarantees of origin: Creating a fair mechanism for renewable electricity generation and trade in europe

International Nuclear Information System (INIS)

Houwing; Michiel; Vries, Laurens J. de

2005-01-01

With the Renewables Directive (2001/77/EC) the EU has obliged its Member States to implement the Guarantees of Origin (GO) policy instrument into their national renewable electricity support schemes. Compared to formerly existing policy instruments as tradable green certificates, GOs can in a Union broad quota obligation scheme, for example, prove to be of major value in arriving at a more transparent and efficient way of trading renewable electricity. This paper gives an overview of the most important hurdles still to be addressed, mainly being double counting issues and policy interactions. When more clarity is given from the Commission in the future and when more EU Member States implement GOs beyond the minimum requirements, international trading of renewable electricity can become truly feasible. (Author)

7 CFR 1980.443 - Collateral, personal and corporate guarantees and other requirements.

Science.gov (United States)

2010-01-01

... the concurrence of FmHA or its successor agency under Public Law 103-354. (b) Personal and corporate... 7 Agriculture 14 2010-01-01 2009-01-01 true Collateral, personal and corporate guarantees and... (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM...

Municipal wastewater affects adipose deposition in male mice and increases 3T3-L1 cell differentiation

International Nuclear Information System (INIS)

Biasiotto, Giorgio; Zanella, Isabella; Masserdotti, Alice; Pedrazzani, Roberta; Papa, Matteo; Caimi, Luigi; Di Lorenzo, Diego

2016-01-01

Trace concentration of EDs (endocrine disrupting compounds) in water bodies caused by wastewater treatment plant effluents is a recognized problem for the health of aquatic organisms and their potential to affect human health. In this paper we show that continuous exposure of male mice from early development to the adult life (140 days) to unrestricted drinking of wastewater collected from a municipal sewage treatment plant, is associated with an increased adipose deposition and weight gain during adulthood because of altered body homeostasis. In parallel, bisphenol A (BPA) at the administration dose of 5 μg/kg/body weight, shows an increasing effect on total body weight and fat mass. In vitro, a solid phase extract (SPE) of the wastewater (eTW), caused stimulation of 3T3-L1 adipocyte differentiation at dilutions of 0.4 and 1 % in the final culture medium which contained a concentration of BPA of 40 nM and 90 nM respectively. Pure BPA also promoted adipocytes differentiation at the concentration of 50 and 80 μM. BPA effect in 3T3-L1 cells was associated to the specific activation of the estrogen receptor alpha (ERα) in undifferentiated cells and the estrogen receptor beta (ERβ) in differentiated cells. BPA also activated the Peroxisome Proliferator Activated Receptor gamma (PPARγ) upregulating a minimal 3XPPARE luciferase reporter and the PPARγ-target promoter of the aP2 gene in adipose cells, while it was not effective in preadipocytes. The pure estrogen receptor agonist diethylstilbestrol (DES) played an opposite action to that of BPA inhibiting PPARγ activity in adipocytes, preventing cell differentiation, activating ERα in preadipocytes and inhibiting ERα and ERβ regulation in adipocytes. The results of this work show that the drinking of chemically-contaminated wastewater promotes fat deposition in male mice and that EDs present in sewage are likely responsible for this effect through a nuclear receptor-mediated mechanism. - Highlights: • Sewage

Municipal wastewater affects adipose deposition in male mice and increases 3T3-L1 cell differentiation

Energy Technology Data Exchange (ETDEWEB)

Biasiotto, Giorgio; Zanella, Isabella [Laboratory of Biotechnology, Civic Hospital of Brescia, Brescia (Italy); Department of Molecular and Translational Medicine, University of Brescia, Brescia (Italy); Masserdotti, Alice [Laboratory of Biotechnology, Civic Hospital of Brescia, Brescia (Italy); Pedrazzani, Roberta [DIMI Department of Mechanical and Industrial Engineering, University of Brescia, via Branze 38, I-25123 Brescia (Italy); Papa, Matteo [DICATAM Department of Civil, Environmental, Architectural Engineering and Mathematics, University of Brescia, via Branze 43, I-25123 Brescia (Italy); Caimi, Luigi [Laboratory of Biotechnology, Civic Hospital of Brescia, Brescia (Italy); Department of Molecular and Translational Medicine, University of Brescia, Brescia (Italy); Di Lorenzo, Diego, E-mail: diego.dilorenzo@yahoo.it [Laboratory of Biotechnology, Civic Hospital of Brescia, Brescia (Italy)

2016-04-15

Trace concentration of EDs (endocrine disrupting compounds) in water bodies caused by wastewater treatment plant effluents is a recognized problem for the health of aquatic organisms and their potential to affect human health. In this paper we show that continuous exposure of male mice from early development to the adult life (140 days) to unrestricted drinking of wastewater collected from a municipal sewage treatment plant, is associated with an increased adipose deposition and weight gain during adulthood because of altered body homeostasis. In parallel, bisphenol A (BPA) at the administration dose of 5 μg/kg/body weight, shows an increasing effect on total body weight and fat mass. In vitro, a solid phase extract (SPE) of the wastewater (eTW), caused stimulation of 3T3-L1 adipocyte differentiation at dilutions of 0.4 and 1 % in the final culture medium which contained a concentration of BPA of 40 nM and 90 nM respectively. Pure BPA also promoted adipocytes differentiation at the concentration of 50 and 80 μM. BPA effect in 3T3-L1 cells was associated to the specific activation of the estrogen receptor alpha (ERα) in undifferentiated cells and the estrogen receptor beta (ERβ) in differentiated cells. BPA also activated the Peroxisome Proliferator Activated Receptor gamma (PPARγ) upregulating a minimal 3XPPARE luciferase reporter and the PPARγ-target promoter of the aP2 gene in adipose cells, while it was not effective in preadipocytes. The pure estrogen receptor agonist diethylstilbestrol (DES) played an opposite action to that of BPA inhibiting PPARγ activity in adipocytes, preventing cell differentiation, activating ERα in preadipocytes and inhibiting ERα and ERβ regulation in adipocytes. The results of this work show that the drinking of chemically-contaminated wastewater promotes fat deposition in male mice and that EDs present in sewage are likely responsible for this effect through a nuclear receptor-mediated mechanism. - Highlights: • Sewage

Compositional Synthesis of Controllers from Scenario-Based Assume-Guarantee Specifications

DEFF Research Database (Denmark)

Greenyer, Joel; Kindler, Ekkart

2013-01-01

Modern software-intensive systems often consist of multiple components that interact to fulfill complex functions in sometimes safety-critical situations. During the design, it is crucial to specify the system's requirements formally and to detect inconsistencies as early as possible in order to ...... present, in this paper, a novel assume-guarantee-style compositional synthesis technique for MSD specifications. We provide evaluation results underlining the benefit of our approach and formally justify its correctness....

A general framework for performance guaranteed green data center networking

OpenAIRE

Wang, Ting; Xia, Yu; Muppala, Jogesh; Hamdi, Mounir; Foufou, Sebti

2014-01-01

From the perspective of resource allocation and routing, this paper aims to save as much energy as possible in data center networks. We present a general framework, based on the blocking island paradigm, to try to maximize the network power conservation and minimize sacrifices of network performance and reliability. The bandwidth allocation mechanism together with power-aware routing algorithm achieve a bandwidth guaranteed tighter network. Besides, our fast efficient heuristics for allocatin...

Guaranteeing CERN’s excellence: consolidate experience

CERN Multimedia

Staff Association

2014-01-01

For its missions CERN requires staff with solid experience in all its domains of activity The Organization has several missions: fundamental research, technical developments and innovation, training the several hundreds of associates, fellows and students, while at the same time taking care of more than 10000 users. In order to guarantee excellence in all of these areas, CERN has to put in place an efficient personnel policy. Such a policy must allow the Organization to recruit collaborators with the highest competence from all Member States, and to keep and motivate them during their entire professional career. But, more importantly, the Organization has to be able to count on a stable workforce. It needs staff with experience gained over a long period in the fields of accelerators, detectors, and operating procedures, if it is to fulfil successfully its important mission of training and knowledge transfer, which is very much appreciated by our Member states, since it highlights a visible return on invest...

13 CFR 107.1600 - SBA authority to issue and guarantee Trust Certificates.

Science.gov (United States)

2010-01-01

... ADMINISTRATION SMALL BUSINESS INVESTMENT COMPANIES SBA Financial Assistance for Licensees (Leverage) Funding... guarantee by SBA of such TC is limited to the principal and interest due on the Debentures or the Redemption... to arrange public or private fundings of Leverage. SBA in its discretion may arrange for public or...

24 CFR 573.5 - Underwriting standards and availability of loan guarantee assistance.

Science.gov (United States)

2010-04-01

... acceptable financial risk under HUD's generally applicable loan underwriting standards based on the following: (1) The Borrower's ability to pay debt service; and (2) The value of the collateral assigned or... insufficient to make the guarantee an acceptable financial risk, or if the proposed interest rates or fees are...

Long-term intake of a high protein diet increases liver triacylglycerol deposition pathways and hepatic signs of injury in rats

KAUST Repository

Diaz Rua, Ruben

2017-04-19

Intake of high-protein (HP) diets has increased over the last years, mainly due to their popularity for body weight control. Liver is the main organ handling ingested macronutrients and it is associated with the beginning of different pathologies. We aimed to deepen our knowledge on molecular pathways affected by long-term intake of an HP diet. We performed a transcriptome analysis on liver of rats chronically fed with a casein-rich HP diet and analyzed molecular parameters related to liver injury. Chronic increase in the dietary protein/carbohydrate ratio up-regulated processes related with amino acid uptake/metabolism and lipid synthesis, promoting a molecular environment indicative of hepatic triacylglycerol (TG) deposition. Moreover, changes in expression of genes involved in acid–base maintenance and oxidative stress indicate alterations in the pH balance due to the high acid load of the diet, which has been linked to liver/health damage. Up-regulation of immune-related genes was also observed. In concordance with changes at gene expression level, we observed increased liver TG content and increased serum markers of hepatic injury/inflammation (aspartate transaminase, C-reactive protein and TNF-alpha). Moreover, the HP diet strongly increased hepatic mRNA and protein levels of HSP90, a marker of liver injury. Thus, we show for the first time that long-term consumption of an HP diet, resulting in a high acid load, results in a hepatic transcriptome signature reflecting increased TG deposition and increased signs of health risk (increased inflammation, alterations in the acid–base equilibrium and oxidative stress). Persistence of this altered metabolic status could have unhealthy consequences.

Long-term intake of a high protein diet increases liver triacylglycerol deposition pathways and hepatic signs of injury in rats

KAUST Repository

Diaz Rua, Ruben; Keijer, Jaap; Palou, Andreu; van Schothorst, Evert M.; Oliver, Paula

2017-01-01

Intake of high-protein (HP) diets has increased over the last years, mainly due to their popularity for body weight control. Liver is the main organ handling ingested macronutrients and it is associated with the beginning of different pathologies. We aimed to deepen our knowledge on molecular pathways affected by long-term intake of an HP diet. We performed a transcriptome analysis on liver of rats chronically fed with a casein-rich HP diet and analyzed molecular parameters related to liver injury. Chronic increase in the dietary protein/carbohydrate ratio up-regulated processes related with amino acid uptake/metabolism and lipid synthesis, promoting a molecular environment indicative of hepatic triacylglycerol (TG) deposition. Moreover, changes in expression of genes involved in acid–base maintenance and oxidative stress indicate alterations in the pH balance due to the high acid load of the diet, which has been linked to liver/health damage. Up-regulation of immune-related genes was also observed. In concordance with changes at gene expression level, we observed increased liver TG content and increased serum markers of hepatic injury/inflammation (aspartate transaminase, C-reactive protein and TNF-alpha). Moreover, the HP diet strongly increased hepatic mRNA and protein levels of HSP90, a marker of liver injury. Thus, we show for the first time that long-term consumption of an HP diet, resulting in a high acid load, results in a hepatic transcriptome signature reflecting increased TG deposition and increased signs of health risk (increased inflammation, alterations in the acid–base equilibrium and oxidative stress). Persistence of this altered metabolic status could have unhealthy consequences.

Long-term intake of a high-protein diet increases liver triacylglycerol deposition pathways and hepatic signs of injury in rats.

Science.gov (United States)

Díaz-Rúa, Rubén; Keijer, Jaap; Palou, Andreu; van Schothorst, Evert M; Oliver, Paula

2017-08-01

Intake of high-protein (HP) diets has increased over the last years, mainly due to their popularity for body weight control. Liver is the main organ handling ingested macronutrients and it is associated with the beginning of different pathologies. We aimed to deepen our knowledge on molecular pathways affected by long-term intake of an HP diet. We performed a transcriptome analysis on liver of rats chronically fed with a casein-rich HP diet and analyzed molecular parameters related to liver injury. Chronic increase in the dietary protein/carbohydrate ratio up-regulated processes related with amino acid uptake/metabolism and lipid synthesis, promoting a molecular environment indicative of hepatic triacylglycerol (TG) deposition. Moreover, changes in expression of genes involved in acid-base maintenance and oxidative stress indicate alterations in the pH balance due to the high acid load of the diet, which has been linked to liver/health damage. Up-regulation of immune-related genes was also observed. In concordance with changes at gene expression level, we observed increased liver TG content and increased serum markers of hepatic injury/inflammation (aspartate transaminase, C-reactive protein and TNF-alpha). Moreover, the HP diet strongly increased hepatic mRNA and protein levels of HSP90, a marker of liver injury. Thus, we show for the first time that long-term consumption of an HP diet, resulting in a high acid load, results in a hepatic transcriptome signature reflecting increased TG deposition and increased signs of health risk (increased inflammation, alterations in the acid-base equilibrium and oxidative stress). Persistence of this altered metabolic status could have unhealthy consequences. Copyright © 2017 Elsevier Inc. All rights reserved.

Fixed-premium deposit insurance and international credit crunches

OpenAIRE

Mark M. Spiegel

1996-01-01

This article introduces a monopolistically competitive model of foreign lending in which both explicit and implicit fixed-premium deposit insurance increase the degree to which bank participation in relending to problem debtors falls below its globally optimal level. This provides a channel for fixed-premium deposit insurance to inhibit credit extension in bad states, resulting in an increase in the expected default percentage and an increase in the expected burden on the deposit insurance in...

FORMATION OF THE FINANCIAL BASIS FOR GOVERNMENT GUARANTEES OF HEALTH CARE IN RUSSIA

Directory of Open Access Journals (Sweden)

E. V. Sinicyna

2014-01-01

Full Text Available Organization of the health system of theRussian Federationin the conditions of limited fi nancial resources needed to develop and implement new methods and management mechanisms. Conducted a study in the article allowed to formulate the basic problems of development management of medical organizations and off er possible solutions through the formation of the fi nancial basis for government guarantees of health care inRussia. The article deals with the current reform in the Russian budget-insurance model of health care fi nancing, reveals the content and direction of the program of state guarantees of medical care in the new fi nancing mechanism of public services. Development and implementation of a new funding system in the management of medical organization will help to reduce costs, improve staff effi ciency, improve the quality of public health services.

Nuclear power: status, outlook, guarantees of sustainable development

International Nuclear Information System (INIS)

Cherkasov, A.S.

2004-01-01

Full text: The principal advantages of nuclear power - almost unlimited fuel resources, its high energy capacity, ecological compatibility with a possibility of high wastes concentration - determine the large-scale nuclear power development. The signs of large-scale power - a large rate (dozens of percent) in electricity production, diverse areas (electricity, heat supply, technologies, transport) and media of application (land, ocean, space), extension of number of user countries, diversified power systems (centralized, autonomous), obligatory reproduction and reuse of produced fuel - create various requirements to nuclear power installations of the future. Economic efficiency and competitiveness, safety (of reactors and fuel cycle with waste), proper characteristics of nuclear fuel reproduction, guarantees of nuclear arm's non-proliferation and, particularly, public acceptance are the conditions of such nuclear power development. The up-to-date situation is the following: the 441 nuclear power-generation units with total installed power of 377.36 GW el. (in 31 countries) supply by 1/6 part of the world electric-power consumptions. The 32 units are in stage of the construction. To the present mid-century the level of the nuclear power production, as supposed, must be increased 4-5 times at the following scenario of a regional distribution of nuclear electric powers, GW: USA, Europe and developed countries of Eastern Asia - 1000, FSU-countries - 100 and developing countries - 400

Fire fighting. Measures to guarantee the safety of the radioactive installations

International Nuclear Information System (INIS)

Orta Aguilera, R.

1993-01-01

The work relates the incidence of the aspects related to the fire prevention and fighting as well as the activities of rescue and saving in the radioactive facilities, with the objective of guaranteeing a strict safety regime of all installations along the country so as to reduce to the minimum the risk for the personnel, the population and the environment

Pollution Prevention: Increasing Environmental Capabilities of SMEs through Collaboration

NARCIS (Netherlands)

Hofman, Peter; de Bruijn, Theo; Tukker, Arnold

2002-01-01

The concept of sustainability increasingly impacts the nature of industry’s operations. Whereas in the past sound economic performance was expected to guarantee success by companies and its shareholders, now increasingly business is led by the so-called triple bottom line. Achieving good economic

Dry deposition fluxes and deposition velocities of trace metals in the Tokyo metropolitan area measured with a water surface sampler.

Science.gov (United States)

Sakata, Masahiro; Marumoto, Kohji

2004-04-01

Dry deposition fluxes and deposition velocities (=deposition flux/atmospheric concentration) for trace metals including Hg, Cd, Cu, Mn, Pb, and Zn in the Tokyo metropolitan area were measured using an improved water surface sampler. Mercury is deposited on the water surface in both gaseous (reactive gaseous mercury, RGM) and particulate (particulate mercury, Hg(p)) forms. The results based on 1 yr observations found that dry deposition plays a significant if not dominant role in trace metal deposition in this urban area, contributing fluxes ranging from 0.46 (Cd) to 3.0 (Zn) times those of concurrent wet deposition fluxes. The deposition velocities were found to be dependent on the deposition of coarse particles larger than approximately 5 microm in diameter on the basis of model calculations. Our analysis suggests that the 84.13% diameter is a more appropriate index for each deposited metal than the 50% diameter in the assumed undersize log-normal distribution, because larger particles are responsible for the flux. The deposition velocities for trace metals other than mercury increased exponentially with an increase in their 84.13% diameters. Using this regression equation, the deposition velocities for Hg(p) were estimated from its 84.13% diameter. The deposition fluxes for Hg(p) calculated from the estimated velocities tended to be close to the mercury fluxes measured with the water surface sampler during the study periods except during summer.

Effect of deposition temperature on the structural, morphological and optical band gap of lead selenide thin films synthesized by chemical bath deposition method

Energy Technology Data Exchange (ETDEWEB)

Hone, Fekadu Gashaw, E-mail: fekeye@gmail.com [Hawassa University, Department of Physics, Hawassa (Ethiopia); Ampong, Francis Kofi [Kwame Nkrumah University of Science and Technology, Department of Physics, Kumasi (Ghana)

2016-11-01

Lead selenide (PbSe) nanocrystalline thin films have been deposited on silica glass substrates by the chemical bath deposition technique. The samples were deposited at the bath temperatures of 60, 75 and 90 °C respectively and characterized by a variety of techniques. The XRD results revealed that the PbSe thin film deposited at 60 °C was amorphous in nature. Films deposited at higher temperatures exhibited sharp and intense diffraction peaks, indicating an improvement in crystallinety. The deposition temperature also had a strong influence on the preferred orientation of the crystallites as well as other structural parameters such as microstrain and dislocation density. From the SEM study it was observed that film deposited at 90 °C had well defined crystallites, uniformly distributed over the entire surface of the substrate. The EDAX study confirmed that the samples deposited at the higher temperature had a better stoichiometric ratio. The optical band gap varied from 2.26 eV to 1.13 eV with increasing deposition temperature. - Highlights: • The crystallinety of the films improved as the deposition temperature increased. • The deposition temperature strongly influenced the preferred orientations. • Microstrain and dislocation density are decreased linearly with deposition temperature. • Band gap decreased from 2.26 eV to 1.13 eV as the deposition temperature increased.

7 CFR 4290.1600 - Secretary's authority to issue and guarantee Trust Certificates.

Science.gov (United States)

2010-01-01

... INVESTMENT COMPANY (âRBICâ) PROGRAM Financial Assistance for RBICs (Leverage) Funding Leverage by Use of... the timely payment of the principal and interest thereon. Any such guarantee of such TC is limited to... any TC. (b) Authority to arrange public or private fundings of Leverage. The Secretary in his or her...

Deposition of titanium coating on SiC fiber by chemical vapor deposition with Ti-I{sub 2} system

Energy Technology Data Exchange (ETDEWEB)

Luo, Xian, E-mail: luo_shenfan@hotmail.com; Wu, Shuai; Yang, Yan-qing; Jin, Na; Liu, Shuai; Huang, Bin

2017-06-01

Highlights: • The transformation paths of (Ti + I{sub 2}) powder to Ti coating is: Ti + I{sub 2} → (TiI{sub 2}, TiI{sub 3}) → Ti. • Uniform coating was obtained on SiC fiber, but it contained Si and C elements. • Deposition rate of the coating increased with the increase of temperature. • Deposition thickness increased with time and achieved the maximum at 90 min. - Abstract: Titanium coating was prepared on SiC fiber using titanium-iodine (Ti-I{sub 2}) mixture by hot-wall chemical vapor deposition. Thermodynamic analysis and experimental observation were carried out in this work. The thermodynamic analysis of the reactions in the Ti-I{sub 2} system indicates that Ti and I{sub 2} raw powder materials transform to titanium coating as follows: Ti + I{sub 2} → (TiI{sub 2}, TiI{sub 3}), and (TiI{sub 2}, TiI{sub 3}) → Ti. In theory, the conversions of TiI{sub 3} and TiI{sub 2} reach the maximum when Ti:I{sub 2} is 1:1.5, while in actual experiment that reached the maximum when Ti:I{sub 2} was 1:2, as there existed the waste of I{sub 2} due to sublimation. Typical deposited coating is relatively flat and uniform. However, as SiC is prone to react with Ti at high temperatures, the obtained coating contained some Si and C elements except for Ti. So the coating was not a pure Ti coating but contained some carbides and silicides. Deposition rate of the coating increased with the increase of temperature. The deposited thickness increased with the increase of heat preservation time, and achieved the maximum thickness at 90 min.

Deposition and Characterization of HVOF Thermal Sprayed Functionally Graded Coatings Deposited onto a Lightweight Material

Science.gov (United States)

Hasan, M.; Stokes, J.; Looney, L.; Hashmi, M. S. J.

2009-02-01

There is a significant interest in lightweight materials (like aluminum, magnesium, titanium, and so on) containing a wear resistance coating, in such industries as the automotive industry, to replace heavy components with lighter parts in order to decrease vehicle weight and increase fuel efficiency. Functionally graded coatings, in which the composition, microstructure, and/or properties vary gradually from the bond coat to the top coat, may be applied to lightweight materials, not only to decrease weight, but also to enhance components mechanical properties by ensuring gradual microstructural (changes) together with lower residual stress. In the current work, aluminum/tool-steel functionally graded coatings were deposited onto lightweight aluminum substrates. The graded coatings were then characterized in terms of residual stress and hardness. Results show that residual stress increased with an increase in deposition thickness and a decrease in number of layers. However, the hardness also increased with an increase in deposition thickness and decrease in number of layers. Therefore, an engineer must compromise between the hardness and stress values while designing a functionally graded coating-substrate system.

Properties of indium tin oxide films deposited on unheated polymer substrates by ion beam assisted deposition

International Nuclear Information System (INIS)

Yu Zhinong; Li Yuqiong; Xia Fan; Zhao Zhiwei; Xue Wei

2009-01-01

The optical, electrical and mechanical properties of indium tin oxide (ITO) films prepared on polyethylene terephthalate (PET) substrates by ion beam assisted deposition at room temperature were investigated. The properties of ITO films can be improved by introducing a buffer layer of silicon dioxide (SiO 2 ) between the ITO film and the PET substrate. ITO films deposited on SiO 2 -coated PET have better crystallinity, lower electrical resistivity, and improved resistance stability under bending than those deposited on bare PET. The average transmittance and the resistivity of ITO films deposited on SiO 2 -coated PET are 85% and 0.90 x 10 -3 Ω cm, respectively, and when the films are bent, the resistance remains almost constant until a bending radius of 1 cm and it increases slowly under a given bending radius with an increase of the bending cycles. The improved resistance stability of ITO films deposited on SiO 2 -coated PET is mainly attributed to the perfect adhesion of ITO films induced by the SiO 2 buffer layer.

Comparative Analysis of Minimum Income Guaranteed Schemes within the Member States of the European Union

Directory of Open Access Journals (Sweden)

Simona Maria Stănescu

2015-09-01

Full Text Available The commitment of the European Union (EU Member States towards accomplishing the commonly agreed goals (1997 European Employment Strategy, Lisbon 2000, and Europe 2020 is supported by a continuous assessment of domestic social policy tendencies. From this perspective, the main goal of the paper is to comparatively analyse the last safety net for the most vulnerable people. The screening of guaranteed minimum resources provides an overview of the applicable statutory basis, schemes in place, types of social benefits concerned, financing and organisation mechanisms, eligibility conditions, duration and time limits. As methodology, the article uses the MISSOC database, and due to the current lack of comparable information, recommendations for further harmonisation are included. 20 of the EU member states follow the minimum income guaranteed (MIG regulations adopted already during the pre-accession period and updated after the accession phase. Seven types of domestic regulations are in force, among which the most frequent ones are acts and laws (ten countries. Common concepts used are social, and assistance. Provided allowances are mainly focused on elderly people, unemployment benefits, pensions, allowances supporting various house related costs, and benefits for disabled people. In line with 2007, 2010, and 2014 data, the financing of guaranteed minimum resources continues to remain mainly central with a shift in 2014 towards mixed financing (both central and local. The management in 2014 continues to be mainly centrally organised but the local stakeholders are also empowered. The residency is the most frequent eligibility condition. No nationality is required in 24 EU member states, for all allowances (21 countries or for particular ones (three countries. 17 member states require no age conditions. Unlimited guaranteed minimum resources were provided in 2014 as long as the eligibility criteria were met in 23 EU member states.

Expediting Tax Deposits Can Increase the Government’s Interest Earnings.

Science.gov (United States)

1983-11-21

the FTD system. These deposits included such tax receipts as withheld personal income tax, corporate income tax , and social security, excise...Greater than or 159,500 2,733 4.2 571,000 222,000 equal to $25,000 Total $1,279,000 Corporate Income Tax Payments Projected Sampling Average Number...than or 130,600 2,215 2.7 292,000 80,000 equal to $25,000 Total $779,000 Corporate Income Tax Payments Projected Sampling Average Number Average

Experimental measurements of the thermal conductivity of ash deposits: Part 2. Effects of sintering and deposit microstructure

Energy Technology Data Exchange (ETDEWEB)

A. L. Robinson; S. G. Buckley; N. Yang; L. L. Baxter

2000-04-01

The authors report results from an experimental study that examines the influence of sintering and microstructure on ash deposit thermal conductivity. The measurements are made using a technique developed to make in situ, time-resolved measurements of the effective thermal conductivity of ash deposits formed under conditions that closely replicate those found in the convective pass of a commercial boiler. The technique is designed to minimize the disturbance of the natural deposit microstructure. The initial stages of sintering and densification are accompanied by an increase in deposit thermal conductivity. Subsequent sintering continues to densify the deposit, but has little effect on deposit thermal conductivity. SEM analyses indicates that sintering creates a layered deposit structure with a relatively unsintered innermost layer. They hypothesize that this unsintered layer largely determines the overall deposit thermal conductivity. A theoretical model that treats a deposit as a two-layered material predicts the observed trends in thermal conductivity.

Decreased Fibroblast and Increased Osteoblast Functions on Ionic Plasma Deposited Nanostructured Ti Coatings

Directory of Open Access Journals (Sweden)

Storey Dan

2007-01-01

Full Text Available AbstractBioactive coatings are in high demand to control cellular functions for numerous medical devices. The objective of this in vitro study was to characterize for the first time fibroblast (fibrous scar tissue forming cells adhesion and proliferation on an important polymeric biomaterial (silicone coated with titanium using a novel ionic plasma deposition (IPD process. Fibroblasts are one of the first anchorage-dependent cells to arrive at an implant surface during the wound healing process. Persistent excessive functions of fibroblasts have been linked to detrimental fibrous tissue formation which may cause implant failure. The IPD process creates a surface-engineered nanostructure (with features usually below 100 nm by first using a vacuum to remove all contaminants, then guiding charged metallic ions or plasma to the surface of a medical device at ambient temperature. Results demonstrated that compared to currently used titanium and uncoated silicone, silicone coated with titanium using IPD significantly decreased fibroblast adhesion and proliferation. Results also showed competitively increased osteoblast (bone-forming cells over fibroblast adhesion on silicone coated with titanium; in contrast, osteoblast adhesion was not competitively increased over fibroblast adhesion on uncoated silicone or titanium controls. In this manner, this study strongly suggests that IPD should be further studied for biomaterial applications in which fibrous tissue encapsulation is undesirable (such as for orthopedic implants, cardiovascular components, etc..

Protection of mineral deposits - a way towards difficult compromises

Science.gov (United States)

Radwanek-Bąk, Barbara; Nieć, Marek

2014-05-01

Mineral deposits are non-renewable natural resources. Their protection and reasonable exploitation are crucial requests resulting from sustainable development principles. Those are also fundamental issues in frame of the intergeneration justice and fairness concept. Protection of mineral resources should be based on interrelated activities: maintaining the possibility of economic use of the identified mineral resources, reduced consumption of mineral resources and ensuring satisfactory results of new prospecting and development of innovative technologies for the mineral resources base. The main problem with guarantee to the use of mineral resources is the accessibility to sites with documented deposits and prospective areas of their occurrence. Often, this contradicts with the interests of residents, planners and needs of the biotic environment protection, thus is often a source of conflicts. Legislative regulations are necessary to mitigate such arguable matters. SWOT analysis carried out with respect to introducing such legal regulations serves to identify the sources of conflicts and difficulties associated with their solution. Consensus reaching is a difficult task, so all decision makers are required to show their mutual understanding and willingness to achieve the goals taking into consideration all benefits for the population (including future generations). Foundations for finding the middle ground are: making the communities aware of their demands on minerals and of indispensable conditions for satisfying these demands; providing complete and accessible information; factual, non-emotional negotiations between decision makers and the public.

Hideout in steam generator tube deposits

International Nuclear Information System (INIS)

Balakrishnan, P.V.; Franklin, K.J.; Turner, C.W.

1998-05-01

Hideout in deposits on steam generator tubes was studied using tubes coated with magnetite. Hideout from sodium chloride solutions at 279 degrees C was followed using an on-line high-temperature conductivity probe, as well as by chemical analysis of solution samples from the autoclave in which the studies were done. Significant hideout was observed only at a heat flux greater than 200 kW/m 2 , corresponding to a temperature drop greater than 2 degrees C across the deposits. The concentration factor resulting from the hideout increased highly non-linearly with the heat flux (varying as high as the fourth power of the heat flux). The decrease in the apparent concentration factor with increasing deposit thickness suggested that the pores in the deposit were occupied by a mixture of steam and water, which is consistent with the conclusion from the thermal conductivity measurements on deposits in a separate study. Analyses of the deposits after the hideout tests showed no evidence of any hidden-out solute species, probably due to the concentrations being very near the detection limits and to their escape from the deposit as the tests were being ended. This study showed that hideout in deposits may concentrate solutes in the steam generator bulk water by a factor as high as 2 x 10 3 . Corrosion was evident under the deposit in some tests, with some chromium enrichment on the surface of the tube. Chromium enrichment usually indicates an acidic environment, but the mobility required of chromium to become incorporated into the thick magnetite deposit may indicate corrosion under an alkaline environment. An alkaline environment could result from preferential accumulation of sodium in the solution in the deposit during the hideout process. (author)

Targeted Overexpression of Inducible 6-Phosphofructo-2-kinase in Adipose Tissue Increases Fat Deposition but Protects against Diet-induced Insulin Resistance and Inflammatory Responses*

Science.gov (United States)

Huo, Yuqing; Guo, Xin; Li, Honggui; Xu, Hang; Halim, Vera; Zhang, Weiyu; Wang, Huan; Fan, Yang-Yi; Ong, Kuok Teong; Woo, Shih-Lung; Chapkin, Robert S.; Mashek, Douglas G.; Chen, Yanming; Dong, Hui; Lu, Fuer; Wei, Lai; Wu, Chaodong

2012-01-01

Increasing evidence demonstrates the dissociation of fat deposition, the inflammatory response, and insulin resistance in the development of obesity-related metabolic diseases. As a regulatory enzyme of glycolysis, inducible 6-phosphofructo-2-kinase (iPFK2, encoded by PFKFB3) protects against diet-induced adipose tissue inflammatory response and systemic insulin resistance independently of adiposity. Using aP2-PFKFB3 transgenic (Tg) mice, we explored the ability of targeted adipocyte PFKFB3/iPFK2 overexpression to modulate diet-induced inflammatory responses and insulin resistance arising from fat deposition in both adipose and liver tissues. Compared with wild-type littermates (controls) on a high fat diet (HFD), Tg mice exhibited increased adiposity, decreased adipose inflammatory response, and improved insulin sensitivity. In a parallel pattern, HFD-fed Tg mice showed increased hepatic steatosis, decreased liver inflammatory response, and improved liver insulin sensitivity compared with controls. In both adipose and liver tissues, increased fat deposition was associated with lipid profile alterations characterized by an increase in palmitoleate. Additionally, plasma lipid profiles also displayed an increase in palmitoleate in HFD-Tg mice compared with controls. In cultured 3T3-L1 adipocytes, overexpression of PFKFB3/iPFK2 recapitulated metabolic and inflammatory changes observed in adipose tissue of Tg mice. Upon treatment with conditioned medium from iPFK2-overexpressing adipocytes, mouse primary hepatocytes displayed metabolic and inflammatory responses that were similar to those observed in livers of Tg mice. Together, these data demonstrate a unique role for PFKFB3/iPFK2 in adipocytes with regard to diet-induced inflammatory responses in both adipose and liver tissues. PMID:22556414

Legal basis and administrative departments for securing and guaranteeing the energy supply

International Nuclear Information System (INIS)

Besslich, W.

1979-01-01

The headline is no game with the words. It distinguishes between the securing of the supply in times of peace and the guarantee in times of defense during war which is a popular topic again and follows a linguistic term by the Bundesrat of 1915 which was kept alive up to day. (orig.) [de

13 CFR 120.210 - What percentage of a loan may SBA guarantee?

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What percentage of a loan may SBA guarantee? 120.210 Section 120.210 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS... percent, except as otherwise authorized by law. [61 FR 3235, Jan. 31, 1996, as amended at 68 FR 51680, Aug...

Inhalation of nanoplatelets - Theoretical deposition simulations.

Science.gov (United States)

Sturm, Robert

2017-12-01

Primary objective of the contribution was the theoretical prediction of nanoplatelet deposition in the human respiratory tract. Modeling was founded on the hypothetical inhalation of graphene nanoplatelets (GNP) measuring 0.01 and 0.1μm in thickness and adopting a projected area diameter of 1-30μm. Particle uptake was assumed to take place with inhalation flow rates of 250, 500, 750, and 1000cm 3 s -1 , respectively. For an appropriate description of pulmonary particle behavior, transport of GNP in a stochastic lung structure and deposition formulae based on analytical and numerical studies were presupposed. The results obtained from the theoretical approach clearly demonstrate that GNP with a thickness of 0.01μm deposit in the respiratory tract by 20-50%, whereas GNP with a thickness of 0.1μm exhibit a deposition of 20-90%. Larger platelets deposit with higher probability than small ones. Increase of inhalation flow rate is accompanied by decreased deposition in the case of thin GNP, whilst thicker GNP are preferably accumulated in the extrathoracic region. Generation-specific deposition ranges from 0.05 to 7% (0.01μm) and from 0.05 to 9%, with maximum values being obtained in airway generation 20. In proximal airway generations (0-10), deposition is increased with inhalation flow rate, whereas in intermediate to distal generations a reverse effect may be observed. Health consequences of GNP deposition in different lung compartments are subjected to an intense debate. Copyright © 2017. Published by Elsevier GmbH.

Takagi-Sugeno fuzzy model identification for turbofan aero-engines with guaranteed stability

Directory of Open Access Journals (Sweden)

Ruichao LI

2018-06-01

Full Text Available This paper is concerned with identifying a Takagi-Sugeno (TS fuzzy model for turbofan aero-engines working under the maximum power status (non-afterburning. To establish the fuzzy system, theoretical contributions are made as follows. First, by fixing antecedent parameters, the estimation of consequent parameters in state-space representations is formulated as minimizing a quadratic cost function. Second, to avoid obtaining unstable identified models, a new theorem is proposed to transform the prior-knowledge of stability into constraints. Then based on the aforementioned work, the identification problem is synthesized as a constrained quadratic optimization. By solving the constrained optimization, a TS fuzzy system is identified with guaranteed stability. Finally, the proposed method is applied to the turbofan aero-engine using simulation data generated from an aerothermodynamics component-level model. Results show the identified fuzzy model achieves a high fitting accuracy while stabilities of the overall fuzzy system and all its local models are also guaranteed. Keywords: Constrained optimization, Fuzzy system, Stability, System identification, Turbofan engine

ADMIT: a toolbox for guaranteed model invalidation, estimation and qualitative-quantitative modeling.

Science.gov (United States)

Streif, Stefan; Savchenko, Anton; Rumschinski, Philipp; Borchers, Steffen; Findeisen, Rolf

2012-05-01

Often competing hypotheses for biochemical networks exist in the form of different mathematical models with unknown parameters. Considering available experimental data, it is then desired to reject model hypotheses that are inconsistent with the data, or to estimate the unknown parameters. However, these tasks are complicated because experimental data are typically sparse, uncertain, and are frequently only available in form of qualitative if-then observations. ADMIT (Analysis, Design and Model Invalidation Toolbox) is a MatLab(TM)-based tool for guaranteed model invalidation, state and parameter estimation. The toolbox allows the integration of quantitative measurement data, a priori knowledge of parameters and states, and qualitative information on the dynamic or steady-state behavior. A constraint satisfaction problem is automatically generated and algorithms are implemented for solving the desired estimation, invalidation or analysis tasks. The implemented methods built on convex relaxation and optimization and therefore provide guaranteed estimation results and certificates for invalidity. ADMIT, tutorials and illustrative examples are available free of charge for non-commercial use at http://ifatwww.et.uni-magdeburg.de/syst/ADMIT/

The unethical focus on access: a study of medical ethics and the waiting-time guarantee.

Science.gov (United States)

Karlberg, H I; Brinkmo, B-M

2009-03-01

All civilized societies favour ethical principles of equity. In healthcare, these principles generally focus on needs for medical care. Methods for establishing priorities among such needs are instrumental in this process. In this study, we analysed whether rules on access to healthcare, waiting-time guarantees, conflict with ethical principles of distributive justice. We interviewed directors, managers and other decision-makers of various healthcare providers of hospitals, primary care organizations and purchasing offices. We also conducted focus group interviews with professionals from a number of distinct medical areas. Our informants and their co-workers were reasonably familiar with the ethical platforms for priority-setting established by the Swedish parliament, giving the sickest patients complete priority. However, to satisfy the waiting-time guarantees, the informants often had to make priority decisions contrary to the ethical principles by favouring access before needs to keep waiting times within certain limits. The common opinion was that the waiting-time guarantee leads to crowding-out effects, overruling the ethical principles based on needs. For more than a decade, the interpretation in Sweden of the equitable principle based on medical needs has been distorted through political decisions, leading to healthcare providers giving priority to access rather than needs for care.

PESTEL Model Analysis and Legal Guarantee of Tourism Environmental Protection in China

Science.gov (United States)

Zhiyong, Xian

2017-08-01

On the basis of summarizing the general situation of tourism environmental protection in China, this paper analyses the macro factors of tourism environmental protection by using PESTEL model. On this basis, this paper explores the improvement paths of tourism environmental protection based on PESTEL model. Finally, it puts forward the legal guarantee suggestion of tourism environment protection.

Nanomechanical properties of GaSe thin films deposited on Si(1 1 1) substrates by pulsed laser deposition

International Nuclear Information System (INIS)

Jian, Sheng-Rui; Juang, Jenh-Yih; Luo, Chih-Wei; Ku, Shin-An; Wu, Kaung-Hsiung

2012-01-01

Highlights: ► GaSe thin films are grown by PLD. ► Structural properties of GaSe thin films are measured by XRD. ► Hardness and Young’s modulus of GaSe thin films are measured by nanoindentation. - Abstract: The correlations between the crystalline structure and mechanical properties of GaSe thin films were investigated by means of X-ray diffraction (XRD) and nanoindentation techniques. The GaSe thin films were deposited on Si(1 1 1) substrates deposited at various deposition temperatures using pulsed laser deposition (PLD). The XRD results indicate that all the GaSe thin films are pure hexagonal phase with highly (0 0 0 l)-oriented characteristics. Nanoindentation results revealed apparent discontinuities (so-called multiple “pop-in” events) in the load-displacement curve, while no discontinuity was observed in the unloading segment of the load-displacement curve. The hardness and Young’s modulus of GaSe thin films determined by the continuous stiffness measurements (CSM) method indicated that both mechanical parameters increased with the increasing deposition temperature with the hardness and the Young’s modulus being increased from 1.2 ± 0.1 to 1.8 ± 0.1 GPa and from 39.6 ± 1.2 to 68.9 ± 2.7 GPa, respectively, as the deposition temperature was raised from 400 to 475 °C. These results suggest that the increased grain size might have played a prominent role in determining the mechanical properties of the PLD-derived GaSe thin films.

Breakthrough to Non-Vacuum Deposition of Single-Crystal, Ultra-Thin, Homogeneous Nanoparticle Layers: A Better Alternative to Chemical Bath Deposition and Atomic Layer Deposition

Directory of Open Access Journals (Sweden)

Yu-Kuang Liao

2017-04-01

Full Text Available Most thin-film techniques require a multiple vacuum process, and cannot produce high-coverage continuous thin films with the thickness of a few nanometers on rough surfaces. We present a new ”paradigm shift” non-vacuum process to deposit high-quality, ultra-thin, single-crystal layers of coalesced sulfide nanoparticles (NPs with controllable thickness down to a few nanometers, based on thermal decomposition. This provides high-coverage, homogeneous thickness, and large-area deposition over a rough surface, with little material loss or liquid chemical waste, and deposition rates of 10 nm/min. This technique can potentially replace conventional thin-film deposition methods, such as atomic layer deposition (ALD and chemical bath deposition (CBD as used by the Cu(In,GaSe2 (CIGS thin-film solar cell industry for decades. We demonstrate 32% improvement of CIGS thin-film solar cell efficiency in comparison to reference devices prepared by conventional CBD deposition method by depositing the ZnS NPs buffer layer using the new process. The new ZnS NPs layer allows reduction of an intrinsic ZnO layer, which can lead to severe shunt leakage in case of a CBD buffer layer. This leads to a 65% relative efficiency increase.

[Living wills in a nursing home, guaranteeing freedom of expression].

Science.gov (United States)

Marigard Guyader, Céline; Richard, Christian

The drawing up of a living will in a nursing home for elderly people is a complex process. Not only must the resident think about the end of life, which is not easy, but the institution must be fully aware of the law. Guaranteeing the resident's expression is essential. A study enabled this subject to be reviewed in a nursing home where different players are present around the resident. It enabled professionals to reflect on their practices. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

The influence of substrate temperature and deposition pressure on pulsed laser deposited thin films of CaS:Eu{sup 2+} phosphors

Energy Technology Data Exchange (ETDEWEB)

Nyenge, R.L. [Department of Physics, University of the Free State, P.O. Box 339, Bloemfontein ZA9300 (South Africa); Physics Department, Kenyatta University, P.O. Box 43844-0100, Nairobi (Kenya); Swart, H.C. [Department of Physics, University of the Free State, P.O. Box 339, Bloemfontein ZA9300 (South Africa); Ntwaeaborwa, O.M., E-mail: ntwaeab@ufs.ac.za [Department of Physics, University of the Free State, P.O. Box 339, Bloemfontein ZA9300 (South Africa)

2016-01-01

The aim of this study was to investigate the influence of substrate temperature and argon deposition pressure on the structure, morphology and photoluminescence emission (PL) properties of pulsed laser deposited thin films of CaS:Eu{sup 2+}. The PL intensity improved significantly upon reaching substrate temperature of 650 °C. The (200) peak gradually became the preferred orientation. The increase in PL intensity as well as surface roughness is attributed to improved crystallinity and higher growth rates, respectively. The best PL intensity as a function of deposition pressure was obtained at an argon pressure of 80 mTorr. The initial increase and eventual drop in PL intensity as deposition pressure increases is ascribed to the changes in growth rates.

Design of stability-guaranteed fuzzy logic controller for nuclear steam generators

International Nuclear Information System (INIS)

Cho, B.H.; No, H.C.

1996-01-01

A fuzzy logic controller (FLC) and a fuzzy logic filter (FLF), which have a special type of fuzzifier, inference engine, and defuzzifier, are applied to the water level control of a nuclear steam generator (S/G). It is shown that arbitrary two-input, single-output linear controllers can be adequately expressed by this FLC. A procedure to construct stability-guaranteed FLC rules is proposed. It contains the following steps: (1) the stable sector of linear feedback gains is obtained from the suboptimal concept based on LQR theory and the Lyapunov's stability criteria; (2) the stable sector of linear gains is mapped into two linear rule tables that are used as limits for the FLC rules; and (3) the construction of an FLC rule table is done by choosing certain rules that lie between these limits. This type of FLC guarantees asymptotic stability of the control system. The FLF generates a feedforward signal of S/G feedwater from the steam flow measurement using a fuzzy concept. Through computer simulation, it is found that the FLC with the FLF works better than a well-tuned PID controller with variable gains to reduce swell/shrink phenomena, especially for the water level deviation and abrupt steam flow disturbances that are typical in the existing power plants

Study on the electrical properties of ITO films deposited by facing target sputter deposition

International Nuclear Information System (INIS)

Kim, Youn J; Jin, Su B; Kim, Sung I; Choi, Yoon S; Choi, In S; Han, Jeon G

2009-01-01

This study examined the mechanism for the change in the electrical properties (carrier concentration (n) and mobility (μ)) of tin-doped indium oxide (ITO) films deposited by magnetron sputtering in a confined facing magnetic field. The relationship between the carrier concentration and the mobility was significantly different from the results reported for ITO films deposited by other magnetron sputtering processes. The lowest resistivity obtained for ITO films deposited in a confined facing magnetic field at low substrate temperatures (approximately 120 0 C) was 4.26 x 10 -4 Ω cm at a power density of 3 W cm -2 . Crystalline ITO films were obtained at a low power density range from 3 to 5 W cm -2 due to the increase in the substrate temperature from 120 to 162 0 C. This contributed to the increased carrier concentration and decreased electrical resistivity. X-ray photoelectron spectroscopy revealed an increase in the concentration of the Sn 4+ states. This was attributed to the formation of a crystalline ITO film, which effectively enhanced the carrier concentration and reduced the carrier mobility.

Deposit Shedding in Biomass-Fired Boilers: Shear Adhesion Strength Measurements

DEFF Research Database (Denmark)

Laxminarayan, Yashasvi; Jensen, Peter Arendt; Wu, Hao

2017-01-01

Ash deposition on boiler surfaces is a major problem encountered in biomass combustion. Timely removal of ash deposits is essentialfor optimal boiler operation. In order to improve the understanding of deposit shedding in boilers, this study investigates the adhesion strength of biomass ash from...... off by an electrically controlled arm, and the corresponding adhesion strength was measured. The effect of sintering temperature, sintering time, deposit composition, thermal shocks on the deposit, and steel type was investigated. The results reveal that the adhesion strength of ash deposits...... is dependent on two factors: ash melt fraction, and corrosion occurring at the deposit–tube interface. Adhesion strength increases with increasing sintering temperature, sharply increasing at the ash deformation temperature. However, sintering time, as well as the type of steel used, does not have...

Studies on the performance guarantee for the engineered barrier system on geological disposal of high-level radioactive waste. V. 2

International Nuclear Information System (INIS)

Sugita, Yutaka; Kurihara, Yuji; Kawakami, Susumu; Jintoku, Takashi; Yui, Mikazu

2003-05-01

In order to contribute to the safety standards and guidelines upon which a governmental administration decide, examination for clarifying how to reflect the result obtained by future R and D was performed. From a view point of long-term safety on geological disposal, the items which should guarantee the performance of each element which constitutes disposal institutions (by this report, they are the backfill, the plug, the tunnel, and the pit) were extracted, and it was shown what a performance guarantee is concretely offered about these items. Furthermore, based on H12 report as a situation of present R and D for a method of a performance guarantee, the subjects considered that a future R and D is required were extracted. (author)

Will nitrogen deposition mitigate warming-increased soil respiration in a young subtropical plantation?

Science.gov (United States)

Xiaofei Liu; Zhijie Yang; Chengfang Lin; Christian P. Giardina; Decheng Xiong; Weisheng Lin; Shidong Chen; Chao Xu; Guangshui Chen; Jinsheng Xie; Yiqing Li; Yusheng Yang

2017-01-01

Global change such as climate warming and nitrogen (N) deposition is likely to alter terrestrial carbon (C) cycling, including soil respiration (Rs), the largest CO2 source from soils to the atmosphere. To examine the effects of warming, N addition and their interactions on Rs, we...

Fouling deposition characteristic by variation of coal particle size and deposition temperature in DTF (Drop Tube Furnace)

Energy Technology Data Exchange (ETDEWEB)

Namkung, Hueon; Jeon, Youngshin; Kim, Hyungtaek [Ajou Univ., Suwon (Korea, Republic of). Div. of Energy Systems Research; Xu, Li-hua [IAE, Suwon (Korea, Republic of). Plant Engineering Center

2013-07-01

One of the major operation obstacles in gasification process is ash deposition phenomenon. In this investigation, experiment was carried out to examine coal fouling characteristics using a laminar DTF (Drop Tube Furnace) with variation of operating condition such as different coal size, and probe surface temperature. Four different samples of pulverized coal were injected into DTF under various conditions. The ash particles are deposited on probe by impacting and agglomerating action. Fouling grains are made of eutectic compound, which is made by reacting with acid minerals and alkali minerals, in EPMA (Electron Probe Micro-Analysis). And agglomeration area of fouling at top layer is wide more than it of middle and bottom layer. The major mineral factors of fouling phenomenon are Fe, Ca, and Mg. The deposition quantity of fouling increases with increasing particle size, high alkali mineral (Fe, Ca, and Mg) contents, and ash deposition temperature.

Guarantee of Criminal Policy as Limited to Criminal Decisionism

Directory of Open Access Journals (Sweden)

María Belén Bonilla Albán

2016-06-01

Full Text Available The essay explains how the inclusion of the security of public policy in the 2008 Constitution of Ecuador as part of the constitutional state of law and justice or “guarantor state” can become a substantial limit for criminal decisionism, which is usually behind the penal policy in Latin America. Thus, the function of this collateral is to eliminate the huge space of discretion in the management of the most sensitive policy of modern state penal policy. However, the guarantee of public policy is not clear in determining the limits of punitive power; therefore, this paper seeks to explore some of the international human rights.

Factors Controlling Black Carbon Deposition in Snow in the Arctic

Science.gov (United States)

Qi, L.; Li, Q.; He, C.; Li, Y.

2015-12-01

This study evaluates the sensitivity of black carbon (BC) concentration in snow in the Arctic to BC emissions, dry deposition and wet scavenging efficiency using a 3D global chemical transport model GEOS-Chem driven by meteorological field GEOS-5. With all improvements, simulated median BC concentration in snow agrees with observation (19.2 ng g-1) within 10%, down from -40% in the default GEOS-Chem. When the previously missed gas flaring emissions (mainly located in Russia) are included, the total BC emission in the Arctic increases by 70%. The simulated BC in snow increases by 1-7 ng g-1, with the largest improvement in Russia. The discrepancy of median BC in snow in the whole Arctic reduces from -40% to -20%. In addition, recent measurements of BC dry deposition velocity suggest that the constant deposition velocity of 0.03 cm s-1 over snow and ice used in the GEOS-Chem is too low. So we apply resistance-in-series method to calculate the dry deposition velocity over snow and ice and the resulted dry deposition velocity ranges from 0.03 to 0.24 cm s-1. However, the simulated total BC deposition flux in the Arctic and BC in snow does not change, because the increased dry deposition flux has been compensated by decreased wet deposition flux. However, the fraction of dry deposition to total deposition increases from 16% to 25%. This may affect the mixing of BC and snow particles and further affect the radative forcing of BC deposited in snow. Finally, we reduced the scavenging efficiency of BC in mixed-phase clouds to account for the effect of Wegener-Bergeron-Findeisen (WBF) process based on recent observations. The simulated BC concentration in snow increases by 10-100%, with the largest increase in Greenland (100%), Tromsø (50%), Alaska (40%), and Canadian Arctic (30%). Annual BC loading in the Arctic increases from 0.25 to 0.43 mg m-2 and the lifetime of BC increases from 9.2 to 16.3 days. This indicates that BC simulation in the Arctic is really sensitive to

Adaptation of failure scenario based resilience schemes toward availability guarantees

Science.gov (United States)

Scheffel, Matthias

2006-07-01

Various resilience schemes have been proposed to allow for fault-tolerant transport networks. Their common aim is to survive certain failure patterns such as node or span failures by providing alternative transmission paths. However, network operators guarantee the resulting network reliability in terms of service availability to their business customers. A maximum duration of service disruption per year must not be exceeded. We investigate an optimal design of resilient network configurations that adapts to end-to-end availability requirements. We formulate an integer linear program that minimizes the resource utilization and investigate a case study.

The Minimum Price Guarantee Policy before and after Real Plan

Directory of Open Access Journals (Sweden)

Jackelline Favro

2014-12-01

Full Text Available This study aims to analyze the performance of the Minimum Price Guarantee Policy - MPGPin Brazil for the main agricultural products, during the 1980s and 1990s, and especially the post-Real Plan period. The research has a bibliographic and descriptive nature. The main results showed that the MPGP remains an important tool for ensuring income to farmers and the supply of selected crops in the analyzed period, but there was a reduction of public action for the new MPGP and new private instruments has revealed efficiency

Role of hydrogen in Sb film deposition and characterization of Sb and GexSby films deposited by cyclic plasma enhanced chemical vapor deposition using metal-organic precursors

International Nuclear Information System (INIS)

Kim, Hyung Keun; Jung, Jin Hwan; Choi, Doo Jin

2012-01-01

To meet increasing demands for chemical vapor deposition methods for high performance phase-change memory, cyclic plasma enhanced chemical vapor deposition of Sb and Ge x Sb y phase-change films and characterization of their properties were performed. Two cycle sequences were designed to investigate the role of hydrogen gas as a reduction gas during Sb film deposition. Hydrogen gas was not introduced into the reaction chamber during the purge step in cycle sequence A and was introduced during the purge step for cycle sequence B. The role of hydrogen gas was investigated by comparing the results obtained from these two cycle sequences and was concluded to exert an effect by a combination of precursor decomposition, surface maintenance as a hydrogen termination agent, and surface etching. These roles of hydrogen gas are discussed through consideration of changes in deposition rates, the oxygen concentration on the surface of the Sb film, and observations of film surface morphology. Based on these results, Ge x Sb y phase-change films were deposited with an adequate flow rate of hydrogen gas. The Ge and Sb composition of the film was controlled with the designed cycle sequences. A strong oxygen affinity for Ge was observed during the X-ray photoelectron spectroscopy analysis of Sb 3d, Sb 4d, and Ge 3d orbitals. Based on the XPS results, the ratios of Ge to Sb were calculated to be Ge 0.32 Sb 0.68 , Ge 0.38 Sb 0.62 , Ge 0.44 Sb 0.56 , Ge 0.51 Sb 0.49 and Ge 0.67 Sb 0.33 for the G1S7, G1S3, G1S2, G1S1, and G2S1 cycles, respectively. Crystal structures of Sb, Ge, and the GeSb metastable phase were observed with various Ge x Sb y film compositions. Sb crystallinity decreased with respect to Ge crystallinity by increasing the Ge fraction. A current–voltage curve was introduced, and an electro-switching phenomenon was clearly generated at a typical voltage, V th . V th values increased in conjunction with an increased proportion of Ge. The Sb crystallinity decrease and V

Deposition of controllable preferred orientation silicon films on glass by inductively coupled plasma chemical vapor deposition

International Nuclear Information System (INIS)

Li Junshuai; Wang Jinxiao; Yin Min; Gao Pingqi; He Deyan; Chen Qiang; Li Yali; Shirai, Hajime

2008-01-01

An inductively coupled plasma (ICP) system with the adjustable distance between the inductance coil and substrates was designed to effectively utilize the spatial confinement of ICP discharge, and then control the gas-phase transport process. The effects of the gas phase processes on the crystallinity and preferred orientation of silicon films deposited on glass were systematically investigated. The investigation was conducted in the ICP-chemical vapor deposition process with the precursor gas of a SiH 4 /H 2 mixture at a substrate temperature of 350 deg. Highly crystallized silicon films with different preferred orientations, (111) or (220), could be selectively deposited by adjusting the SiH 4 dilution ratio [R=[SiH 4 ]/([SiH 4 ]+[H 2 ])] or total working pressure. When the total working pressure is 20 Pa, the crystallinity of the silicon films increases with the increase of the SiH 4 dilution ratio, while the preferred orientation was changed from (111) to (220). In the case of the fixed SiH 4 dilution (10%), the silicon film with I (220) /I (111) of about 3.5 and Raman crystalline fraction of about 89.6% has been deposited at 29.7 nm/min when the total working pressure was increased to 40 Pa. At the fixed SiH 4 partial pressure of 2 Pa, the film crystallinity decreases and the preferred orientation is always (111) with increasing the H 2 partial pressure from 18 to 58 Pa. Atomic force microscope reveals that the film deposited at a relatively high H 2 partial pressure has a very rough surface caused by the devastating etching of H atoms to the silicon network

ADMIT: a toolbox for guaranteed model invalidation, estimation and qualitative–quantitative modeling

Science.gov (United States)

Streif, Stefan; Savchenko, Anton; Rumschinski, Philipp; Borchers, Steffen; Findeisen, Rolf

2012-01-01

Summary: Often competing hypotheses for biochemical networks exist in the form of different mathematical models with unknown parameters. Considering available experimental data, it is then desired to reject model hypotheses that are inconsistent with the data, or to estimate the unknown parameters. However, these tasks are complicated because experimental data are typically sparse, uncertain, and are frequently only available in form of qualitative if–then observations. ADMIT (Analysis, Design and Model Invalidation Toolbox) is a MatLabTM-based tool for guaranteed model invalidation, state and parameter estimation. The toolbox allows the integration of quantitative measurement data, a priori knowledge of parameters and states, and qualitative information on the dynamic or steady-state behavior. A constraint satisfaction problem is automatically generated and algorithms are implemented for solving the desired estimation, invalidation or analysis tasks. The implemented methods built on convex relaxation and optimization and therefore provide guaranteed estimation results and certificates for invalidity. Availability: ADMIT, tutorials and illustrative examples are available free of charge for non-commercial use at http://ifatwww.et.uni-magdeburg.de/syst/ADMIT/ Contact: stefan.streif@ovgu.de PMID:22451270

7 CFR 1786.35 - Loss, theft, destruction, mutilation, or defacement of RUS guarantee.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Loss, theft, destruction, mutilation, or defacement... Loans Pursuant to Section 306(A) of the RE Act § 1786.35 Loss, theft, destruction, mutilation, or... circumstances of the loss, theft, or destruction of the guarantee; and (vi) The lender or holder, shall present...

Performance Guaranteed Inertia Emulation forDiesel-Wind System Feed Microgrid via ModelReference Control

Energy Technology Data Exchange (ETDEWEB)

Melin, Alexander M. [ORNL; Zhang, Yichen [University of Tennessee, Knoxville (UTK), Department of Electrical Engineering and Computer Science; Djouadi, Seddik [University of Tennessee, Knoxville (UTK), Department of Electrical Engineering and Computer Science; Olama, Mohammed M. [ORNL

2017-04-01

In this paper, a model reference control based inertia emulation strategy is proposed. Desired inertia can be precisely emulated through this control strategy so that guaranteed performance is ensured. A typical frequency response model with parametrical inertia is set to be the reference model. A measurement at a specific location delivers the information of disturbance acting on the diesel-wind system to the referencemodel. The objective is for the speed of the diesel-wind system to track the reference model. Since active power variation is dominantly governed by mechanical dynamics and modes, only mechanical dynamics and states, i.e., a swing-engine-governor system plus a reduced-order wind turbine generator, are involved in the feedback control design. The controller is implemented in a three-phase diesel-wind system feed microgrid. The results show exact synthetic inertia is emulated, leading to guaranteed performance and safety bounds.

Effects of deposition period on the chemical bath deposited Cu4SnS4 thin films

International Nuclear Information System (INIS)

Kassim, Anuar; Wee Tee, Tan; Soon Min, Ho.; Nagalingam, Saravanan

2010-01-01

Cu 4 SnS 4 thin films were prepared by simple chemical bath deposition technique. The influence of deposition period on the structural, morphological and optical properties of films was studied. The films were characterized using X-ray diffraction, atomic force microscopy and UV-Vis Spectrophotometer. X-ray diffraction patterns indicated that the films were polycrystalline with prominent peak attributed to (221) plane of orthorhombic crystal structure. The films prepared at 80 min showed significant increased in the intensity of all diffractions. According to AFM images, these films indicated that the surface of substrate was covered completely. The obtained films also produced higher absorption characteristics when compared to the films prepared at other deposition periods based on optical absorption studies. The band gap values of films deposited at different deposition periods were in the range of 1.6-2.1 eV. Deposition for 80 min was found to be the optimum condition to produce good quality thin films under the current conditions. (author).

Optimal Guaranteed Service Time and Service Level Decision with Time and Service Level Sensitive Demand

Directory of Open Access Journals (Sweden)

Sangjun Park

2014-01-01

Full Text Available We consider a two-stage supply chain with one supplier and one retailer. The retailer sells a product to customer and the supplier provides a product in a make-to-order mode. In this case, the supplier’s decisions on service time and service level and the retailer’s decision on retail price have effects on customer demand. We develop optimization models to determine the optimal retail price, the optimal guaranteed service time, the optimal service level, and the optimal capacity to maximize the expected profit of the whole supply chain. The results of numerical experiments show that it is more profitable to determine the optimal price, the optimal guaranteed service time, and the optimal service level simultaneously and the proposed model is more profitable in service level sensitive market.

GRS - Guarantee of results for grid-connected solar photovoltaic systems; GRS - Garantierte Resultate von Solarstromanlagen

Energy Technology Data Exchange (ETDEWEB)

Meier, Ch.; Frei, R.

2001-07-01

This final report for the Swiss Federal Office of Energy describes the development of a performance guarantee for the power delivered by grid-connected photovoltaic (PV) power plant. This is important for investors, who need to be able to calculate the price of the energy produced by the PV plant. The report examines the results of various case studies and experience gained with GRS contracts developed in different countries including Switzerland, the Netherlands, France and Germany. The problems encountered, which provided feedback for the further development of the contract presented in the report, are discussed. The model contract, which proposes a framework which provides many possible variations and adaptations, is presented in detail. Various problem areas such as guaranteed energy yield, meteorological references, correction methods, failure detection, dispute settlement and many other points are covered.

Constitutional principles of the state policy in the area of guaranteeing the ownership

Directory of Open Access Journals (Sweden)

Ю. С. Гаєвська

2015-05-01

Full Text Available Problem’s setting. The economic rights and freedoms, namely the ownership have an important place in the economic system. Improvement of legal regulation concerning the state policy in the area of the ownership requires detailed regulation at the constitutional level, because of the high level of corruption and crime rate in economic relations. These negative consequences are primarily provoked by low level of democratic procedures’ efficiency and the mechanism of realizing economic rights. Analysis of recent research and publications. Some aspects of this issue have been the matter of studies of a number of Ukrainian and foreign scholars. The notion of the state policy was studied in the works of: V. Tertychka, O. Kucherenko, P. Fris, etc. Issues concerning the state policy in the economic sphere were the interest of: V. Ustimenko, V. Mamutov, V. Selivanov, O. Skupinskyi, D. Zadykhailo, Yu. Bysiah, I. Kresin and others. The objective of this paper is to determine the general principles of the state policy in the area of guaranteeing the ownership, to establish their content, place and significance for the economic system and to formulate the definition of the concept of the state policy in the area of the ownership. The main part: Development and realization of the constructive state policy in the economic sphere will lead to the stabilization of economic relations; reduce violations of the economic rights granted by the Constitution; increase the trust of public to the state apparatus; increasing the public sense of security by the state. Constitutional acts become the major legal factor in social, state and legal development. The Constitution is a source of the state economic policy; it has the policy character and performs the predictive function. The scholars repeatedly note that there is the necessity to amend the constitutional provisions of the Main Law relating to the economic system, including the allocation of a separate section

Real promise or false hope: DOE's title XVII loan Guarantee

Energy Technology Data Exchange (ETDEWEB)

Massouh, Jennifer F.; Cannon, George D. Jr.; Logan, Suzanne M.; Schwartz, David L.

2009-05-15

While the American Recovery and Reinvestment Act of 2009 expanded the DOE loan guarantee program to include certain ''shovel-ready'' projects, and appropriated $6 billion to cover the credit subsidy cost associated with these projects, it failed to resolve some of the most pressing problems facing the program. Here are some recommendations that may finally get some shovels in the ground. (author)

7 CFR 1955.12 - Acquisition of property which served as security for a loan guarantee by FmHA or its successor...

Science.gov (United States)

2010-01-01

... Chattel Property § 1955.12 Acquisition of property which served as security for a loan guarantee by FmHA... 7 Agriculture 14 2010-01-01 2009-01-01 true Acquisition of property which served as security for a loan guarantee by FmHA or its successor agency under Public Law 103-354 or at sale by another...

Particle deposition in ventilation ducts

Energy Technology Data Exchange (ETDEWEB)

Sippola, Mark Raymond [Univ. of California, Berkeley, CA (United States)

2002-09-01

Exposure to airborne particles is detrimental to human health and indoor exposures dominate total exposures for most people. The accidental or intentional release of aerosolized chemical and biological agents within or near a building can lead to exposures of building occupants to hazardous agents and costly building remediation. Particle deposition in heating, ventilation and air-conditioning (HVAC) systems may significantly influence exposures to particles indoors, diminish HVAC performance and lead to secondary pollutant release within buildings. This dissertation advances the understanding of particle behavior in HVAC systems and the fates of indoor particles by means of experiments and modeling. Laboratory experiments were conducted to quantify particle deposition rates in horizontal ventilation ducts using real HVAC materials. Particle deposition experiments were conducted in steel and internally insulated ducts at air speeds typically found in ventilation ducts, 2-9 m/s. Behaviors of monodisperse particles with diameters in the size range 1-16 μm were investigated. Deposition rates were measured in straight ducts with a fully developed turbulent flow profile, straight ducts with a developing turbulent flow profile, in duct bends and at S-connector pieces located at duct junctions. In straight ducts with fully developed turbulence, experiments showed deposition rates to be highest at duct floors, intermediate at duct walls, and lowest at duct ceilings. Deposition rates to a given surface increased with an increase in particle size or air speed. Deposition was much higher in internally insulated ducts than in uninsulated steel ducts. In most cases, deposition in straight ducts with developing turbulence, in duct bends and at S-connectors at duct junctions was higher than in straight ducts with fully developed turbulence. Measured deposition rates were generally higher than predicted by published models. A model incorporating empirical equations based on the

Post-depositional fracturing and subsidence of pumice flow deposits: Lascar Volcano, Chile.

Science.gov (United States)

Whelley, Patrick L; Jay, J; Calder, E S; Pritchard, M E; Cassidy, N J; Alcaraz, S; Pavez, A

Unconsolidated pyroclastic flow deposits of the 1993 eruption of Lascar Volcano, Chile, have, with time, become increasingly dissected by a network of deeply penetrating fractures. The fracture network comprises orthogonal sets of decimeter-wide linear voids that form a pseudo-polygonal grid visible on the deposit surface. In this work, we combine shallow surface geophysical imaging tools with remote sensing observations and direct field measurements of the deposit to investigate these fractures and their underlying causal mechanisms. Based on ground penetrating radar images, the fractures are observed to have propagated to depths of up to 10 m. In addition, orbiting radar interferometry shows that deposit subsidence of up to 1 cm/year -1 occurred between 1993 and 1996 with continued subsidence occurring at a slower rate thereafter. In situ measurements show that 1 m below the surface, the 1993 deposits remain 5°C to 15°C hotter, 18 years after emplacement, than adjacent deposits. Based on the observed subsidence as well as estimated cooling rates, the fractures are inferred to be the combined result of deaeration, thermal contraction, and sedimentary compaction in the months to years following deposition. Significant environmental factors, including regional earthquakes in 1995 and 2007, accelerated settling at punctuated moments in time. The spatially variable fracture pattern relates to surface slope and lithofacies variations as well as substrate lithology. Similar fractures have been reported in other ignimbrites but are generally exposed only in cross section and are often attributed to formation by external forces. Here we suggest that such interpretations should be invoked with caution, and deformation including post-emplacement subsidence and fracturing of loosely packed ash-rich deposits in the months to years post-emplacement is a process inherent in the settling of pyroclastic material.

Supply guarantee initiatives for nuclear fuel materials and services and their compatibility with the market

International Nuclear Information System (INIS)

Nagano, Koji

2009-01-01

This paper first discusses where and why those ideas for nuclear fuel supply assurance and guarantee mechanisms came out, and attempts to draw a comparison among the proposed schemes and thereby examine possible steps forward. (author)

Deposition and characterization of ZnS thin films using chemical bath deposition method in the presence of sodium tartrate as complexing agent

International Nuclear Information System (INIS)

Kassim, A.; Tee, T.W.; Min, H.S.; Nagalingam, S.

2011-01-01

ZnS thin films were deposited on indium tin oxide glass substrate using the chemical bath deposition method. The deposited films were characterized by X-ray diffraction and atomic force microscopy. The influence of bath temperature on the structure and morphology of the thin films was investigated at three different bath temperatures of 60, 70 and 80 deg. C in the presence of sodium tartrate as a complexing agent. The XRD results indicated that the deposited ZnS thin films exhibited a polycrystalline cubic structure. The number of ZnS peaks increased from three to four peaks as the bath temperature was increased from 60 to 80 deg. C based on the XRD patterns. From the AFM measurements, the film thickness and surface roughness were found to be dependent on the bath temperature. The grain size increased as the bath temperature was increased from 60 to 80 deg. C. (author)

Transparent conductive p-type lithium-doped nickel oxide thin films deposited by pulsed plasma deposition

Science.gov (United States)

Huang, Yanwei; Zhang, Qun; Xi, Junhua; Ji, Zhenguo

2012-07-01

Transparent p-type Li0.25Ni0.75O conductive thin films were prepared on conventional glass substrates by pulsed plasma deposition. The effects of substrate temperature and oxygen pressure on structural, electrical and optical properties of the films were investigated. The electrical resistivity decreases initially and increases subsequently as the substrate temperature increases. As the oxygen pressure increases, the electrical resistivity decreases monotonically. The possible physical mechanism was discussed. And a hetero p-n junction of p-Li0.25Ni0.75O/n-SnO2:W was fabricated by depositing n-SnO2:W on top of the p-Li0.25Ni0.75O, which exhibits typical rectifying current-voltage characteristics.

Transparent conductive p-type lithium-doped nickel oxide thin films deposited by pulsed plasma deposition

International Nuclear Information System (INIS)

Huang Yanwei; Zhang Qun; Xi Junhua; Ji Zhenguo

2012-01-01

Transparent p-type Li 0.25 Ni 0.75 O conductive thin films were prepared on conventional glass substrates by pulsed plasma deposition. The effects of substrate temperature and oxygen pressure on structural, electrical and optical properties of the films were investigated. The electrical resistivity decreases initially and increases subsequently as the substrate temperature increases. As the oxygen pressure increases, the electrical resistivity decreases monotonically. The possible physical mechanism was discussed. And a hetero p-n junction of p-Li 0.25 Ni 0.75 O/n-SnO 2 :W was fabricated by depositing n-SnO 2 :W on top of the p-Li 0.25 Ni 0.75 O, which exhibits typical rectifying current-voltage characteristics.

The likely impact of elevated [CO2], nitrogen deposition, increased temperature and management on carbon sequestration in temperate and boreal forest ecosystems: a literature review

Science.gov (United States)

Riitta Hyvönen; Göran I. Ågren; Sune Linder; Tryggve Persson; M. Francesca Cotrufo; Alf Ekblad; Michael Freeman; Achim Grelle; Ivan A. Janssens; Paul G. Jarvis; Seppo Kellomäki; Anders Lindroth; Denis Loustau; Tomas Lundmark; Richard J. Norby; Ram Oren; Kim Pilegaard; Michael G. Ryan; Bjarni D. Sigurdsson; Monika Strömgren; Marcel van Oijen; Göran Wallin

2007-01-01

Temperate and boreal forest ecosystems contain a large part of the carbon stored on land, in the form of both biomass and soil organic matter. Increasing atmospheric [CO2], increasing temperature, elevated nitrogen deposition and intensified management will change this C store. Well documented single-factor responses of net primary production are: higher photosynthetic...

Effect of deposition rate on the microstructure of electron beam evaporated nanocrystalline palladium thin films

Energy Technology Data Exchange (ETDEWEB)

Amin-Ahmadi, B., E-mail: behnam.amin-ahmadi@ua.ac.be [Electron Microscopy for Materials Science (EMAT), Department of Physics, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp (Belgium); Idrissi, H. [Electron Microscopy for Materials Science (EMAT), Department of Physics, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp (Belgium); Galceran, M. [Université Libre de Bruxelles, Matters and Materials Department, 50 Av. FD Roosevelt CP194/03, 1050 Brussels (Belgium); Colla, M.S. [Institute of Mechanics, Materials and Civil Engineering, Université catholique de Louvain, Place Sainte Barbe 2, B-1348 Louvain-la-Neuve (Belgium); Raskin, J.P. [Information and Communications Technologies, Electronics and Applied Mathematics (ICTEAM), Microwave Laboratory, Université catholique de Louvain, B-1348 Louvain-la-Neuve (Belgium); Pardoen, T. [Institute of Mechanics, Materials and Civil Engineering, Université catholique de Louvain, Place Sainte Barbe 2, B-1348 Louvain-la-Neuve (Belgium); Godet, S. [Université Libre de Bruxelles, Matters and Materials Department, 50 Av. FD Roosevelt CP194/03, 1050 Brussels (Belgium); Schryvers, D. [Electron Microscopy for Materials Science (EMAT), Department of Physics, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp (Belgium)

2013-07-31

The influence of the deposition rate on the formation of growth twins in nanocrystalline Pd films deposited by electron beam evaporation is investigated using transmission electron microscopy. Statistical measurements prove that twin boundary (TB) density and volume fraction of grains containing twins increase with increasing deposition rate. A clear increase of the dislocation density was observed for the highest deposition rate of 5 Å/s, caused by the increase of the internal stress building up during deposition. Based on crystallographic orientation indexation using transmission electron microscopy, it can be concluded that a {111} crystallographic texture increases with increasing deposition rate even though the {101} crystallographic texture remains dominant. Most of the TBs are fully coherent without any residual dislocations. However, for the highest deposition rate (5 Å/s), the coherency of the TBs decreases significantly as a result of the interaction of lattice dislocations emitted during deposition with the growth TBs. The analysis of the grain boundary character of different Pd films shows that an increasing fraction of high angle grain boundaries with misorientation angles around 55–65° leads to a higher potential for twin formation. - Highlights: • Fraction of twinned grains and twin boundary density increase with deposition rate. • Clear increase of dislocation density was observed for the highest deposition rate. • A moderate increase of the mean grain size with increase of deposition rate is found. • For the highest deposition rate, the twin boundaries lose their coherency. • Fraction of high angle grain boundary (55–65) increases with deposition rate.

Honeywell starts energy-management service: savings guaranteed; BOSS replaced

Energy Technology Data Exchange (ETDEWEB)

Schwartz, R.

1983-01-24

Honeywell Inc. guarantees that its new Honeywell Service Link Operation (HSLO), a time-sharing service, will produce greater energy savings than its monthly fees. There are no front-end costs because the central computer is located at the supplier's Atlanta site, making energy management cost-affordable for facilities as small as 25,000 square feet. HSLO replaces Honeywell's Building Operations Service System (BOSS) that has a minimum-size requirement of 100,000 square feet. BOSS customers will be automatically changed to HSLO at no charge. All 21 regional computer centers will be available to users. Johnson Controls, Inc. also operates a time-sharing operation called Total Automated Building Services (TABS). (DCK)

Microstructure of vapor deposited coatings on curved substrates

Energy Technology Data Exchange (ETDEWEB)

Rodgers, Theron M.; Zhao, Hengbei; Wadley, Haydn N. G., E-mail: haydn@virginia.edu [Department of Materials Science and Engineering, University of Virginia, 395 McCormick Rd., P.O. Box 400745, Charlottesville, Virginia 22904 (United States)

2015-09-15

Thermal barrier coating systems consisting of a metallic bond coat and ceramic over layer are widely used to extend the life of gas turbine engine components. They are applied using either high-vacuum physical vapor deposition techniques in which vapor atoms rarely experience scattering collisions during propagation to a substrate, or by gas jet assisted (low-vacuum) vapor deposition techniques that utilize scattering from streamlines to enable non-line-of-sight deposition. Both approaches require substrate motion to coat a substrate of complex shape. Here, direct simulation Monte Carlo and kinetic Monte Carlo simulation methods are combined to simulate the deposition of a nickel coating over the concave and convex surfaces of a model airfoil, and the simulation results are compared with those from experimental depositions. The simulation method successfully predicted variations in coating thickness, columnar growth angle, and porosity during both stationary and substrate rotated deposition. It was then used to investigate a wide range of vapor deposition conditions spanning high-vacuum physical vapor deposition to low-vacuum gas jet assisted vapor deposition. The average coating thickness was found to increase initially with gas pressure reaching a maximum at a chamber pressure of 8–10 Pa, but the best coating thickness uniformity was achieved under high vacuum deposition conditions. However, high vacuum conditions increased the variation in the coatings pore volume fraction over the surface of the airfoil. The simulation approach was combined with an optimization algorithm and used to investigate novel deposition concepts to tailor the local coating thickness.

Microstructure of vapor deposited coatings on curved substrates

International Nuclear Information System (INIS)

Rodgers, Theron M.; Zhao, Hengbei; Wadley, Haydn N. G.

2015-01-01

Thermal barrier coating systems consisting of a metallic bond coat and ceramic over layer are widely used to extend the life of gas turbine engine components. They are applied using either high-vacuum physical vapor deposition techniques in which vapor atoms rarely experience scattering collisions during propagation to a substrate, or by gas jet assisted (low-vacuum) vapor deposition techniques that utilize scattering from streamlines to enable non-line-of-sight deposition. Both approaches require substrate motion to coat a substrate of complex shape. Here, direct simulation Monte Carlo and kinetic Monte Carlo simulation methods are combined to simulate the deposition of a nickel coating over the concave and convex surfaces of a model airfoil, and the simulation results are compared with those from experimental depositions. The simulation method successfully predicted variations in coating thickness, columnar growth angle, and porosity during both stationary and substrate rotated deposition. It was then used to investigate a wide range of vapor deposition conditions spanning high-vacuum physical vapor deposition to low-vacuum gas jet assisted vapor deposition. The average coating thickness was found to increase initially with gas pressure reaching a maximum at a chamber pressure of 8–10 Pa, but the best coating thickness uniformity was achieved under high vacuum deposition conditions. However, high vacuum conditions increased the variation in the coatings pore volume fraction over the surface of the airfoil. The simulation approach was combined with an optimization algorithm and used to investigate novel deposition concepts to tailor the local coating thickness

The Removal of the Judge as a Guarantee of Fair Criminal Justice

Directory of Open Access Journals (Sweden)

Yury V. Derishev

2016-11-01

Full Text Available The article is devoted to the institution of the removal of a judge in criminal trial proceedings, which is regarded as the most important guarantees of fair criminal justice. Based on the definition of the nature and content of the mechanism for the removal of a judge, the Authors offer an analysis of the problems of the application of law that accompany its implementation in modern criminal proceedings

Adhesion Strength of Biomass Ash Deposits

DEFF Research Database (Denmark)

Laxminarayan, Yashasvi; Jensen, Peter Arendt; Wu, Hao

2015-01-01

This study investigates the shear adhesion strength of biomass ash deposits on superheater tubes. Artificial biomass ash deposits were prepared on superheater tubes and sintered in an oven at temperatures up to 1000°C. Subsequently, the deposits were sheared off with the help of an electrically...... controlled arm. Higher sintering temperatures resulted in greater adhesion strengths, with a sharp increase observed near the melting point of the ash. Repetition of experiments with fixed operation conditions revealed considerable variation in the obtained adhesion strengths, portraying the stochastic...

Massive CO2 Ice Deposits Sequestered in the South Polar Layered Deposits of Mars

Science.gov (United States)

Phillips, Roger J.; Davis, Brian J.; Tanaka, Kenneth L.; Byrne, Shane; Mellon, Michael T.; Putzig, Nathaniel E.; Haberle, Robert M.; Kahre, Melinda A.; Campbell, Bruce A.; Carter, Lynn M.; Smith, Isaac B.; Holt, John W.; Smrekar, Suzanne E.; Nunes, Daniel C.; Plaut, Jeffrey J.; Egan, Anthony F.; Titus, Timothy N.; Seu, Roberto

2011-01-01

Shallow Radar soundings from the Mars Reconnaissance Orbiter reveal a buried deposit of carbon dioxide (CO2) ice within the south polar layered deposits of Mars with a volume of 9500 to 12,500 cubic kilometers, about 30 times that previously estimated for the south pole residual cap. The deposit occurs within a stratigraphic unit that is uniquely marked by collapse features and other evidence of interior CO2 volatile release. If released into the atmosphere at times of high obliquity, the CO2 reservoir would increase the atmospheric mass by up to 80%, leading to more frequent and intense dust storms and to more regions where liquid water could persist without boiling.

Constitutional judges (guarantee of the Constitution and responsibility

Directory of Open Access Journals (Sweden)

Francisco Javier Ansuátegui Roig

2012-06-01

Full Text Available My aim in this paper is to propose a reflection on the position and the importance that the constitutional judge has in the legal systems of contemporary constitutionalism. The figure of the judge responsible of protecting the Constitution is a key institution, without which we cannot understand the laws of constitutional democracies, their current lines of development, and the guarantee of rights and freedoms that constitute the normative core of these systems. Moreover, the reflection on the exercise of the powers of the judge, its scope and its justification is an important part of contemporary legal discussion, still relevant, albeit not exclusively - in the field of legal philosophy. The object of attention of my reflection is the judge who has the power of judicial review, in a scheme of defense of the Constitution, regardless the specific ways of this defense.

Oxide cathodes produced by plasma deposition

International Nuclear Information System (INIS)

Scheitrum, G.; Caryotakis, G.; Pi, T.; Umstattd, R.; Brown, I.; Montiero, O.

1997-01-01

These are two distinct applications for high-current-density, long-life thermionic cathodes. The first application is as a substitute for explosive emission cathodes used in high-power microwave (HPM) devices being developed for Air Force programs. The second application is in SLAC's X-band klystrons for the Next Linear Collider (NLC). SLAC, UCD, and LBL are developing a plasma deposition process that eliminates the problems with binders, carbonate reduction, peeling, and porosity. The emission layer is deposited using plasma deposition of metallic barium in vacuum with an oxygen background gas. An applied bias voltage drives the oxide plasma into the nickel surface. Since the oxide is deposited directly, it does not have problems with poisoning from a hydrocarbon binder. The density of the oxide layer is increased from the 40--50% for standard oxide cathodes to nearly 100% for plasma deposition

Energy deposition in NSRR test fuels

International Nuclear Information System (INIS)

Ohnishi, Nobuaki; Tanzawa, Sadamitsu; Tanzawa, Tomio; Kitano, Teruaki; Okazaki, Shuji

1978-02-01

Interpretation of fuel performance data collected during inpile testing in the NSRR requires a knowledge of the energy deposition or enthalpy increase in each sample tested. The report describes the results of absolute measurement of fission products and contents of uranium in irradiated test fuels which were performed to determine the energy deposition. (auth.)

Statistical methods for elimination of guarantee-time bias in cohort studies: a simulation study

Directory of Open Access Journals (Sweden)

In Sung Cho

2017-08-01

Full Text Available Abstract Background Aspirin has been considered to be beneficial in preventing cardiovascular diseases and cancer. Several pharmaco-epidemiology cohort studies have shown protective effects of aspirin on diseases using various statistical methods, with the Cox regression model being the most commonly used approach. However, there are some inherent limitations to the conventional Cox regression approach such as guarantee-time bias, resulting in an overestimation of the drug effect. To overcome such limitations, alternative approaches, such as the time-dependent Cox model and landmark methods have been proposed. This study aimed to compare the performance of three methods: Cox regression, time-dependent Cox model and landmark method with different landmark times in order to address the problem of guarantee-time bias. Methods Through statistical modeling and simulation studies, the performance of the above three methods were assessed in terms of type I error, bias, power, and mean squared error (MSE. In addition, the three statistical approaches were applied to a real data example from the Korean National Health Insurance Database. Effect of cumulative rosiglitazone dose on the risk of hepatocellular carcinoma was used as an example for illustration. Results In the simulated data, time-dependent Cox regression outperformed the landmark method in terms of bias and mean squared error but the type I error rates were similar. The results from real-data example showed the same patterns as the simulation findings. Conclusions While both time-dependent Cox regression model and landmark analysis are useful in resolving the problem of guarantee-time bias, time-dependent Cox regression is the most appropriate method for analyzing cumulative dose effects in pharmaco-epidemiological studies.

ALIENAÇÃO FIDUCIÁRIA DE IMÓVEL: APORIAS NA CONTRATAÇÃO / FIDUCIARY ASSIGNMENT FOR THE GUARANTEE OF REAL ESTATES: CONTRACTING APORIA

Directory of Open Access Journals (Sweden)

Erik Frederico Gramstrup

2016-04-01

Full Text Available This article refers to practical problems involving the compliance of the fiduciary assignment for the guarantee of real estate, according to the principles of the social function, good faith and the contractual balance, using the inductive methodology. In addition to the presentation and analysis of recent problems faced by the Brazilian Superior Court of Justice, in particular we have been identified and analyzed problems involving the contracting of the fiduciary assignment for the guarantee of real estate that are still pending Praetorian analysis, aiming for a solution in the Brazilian Law. The study demonstrates that the contract in reference is under constant unbalances, distorting its use and away from the purpose intended by the legislature. To make the technical analysis of this complex contract possible, it was necessary to retake definitions; concept; historical interpretation; legal nature and effects; and the guarantee foreclosure, not only of the fiduciary assignment for the guarantee of real estate, but also about the legal transaction and the trust property.

Temporal variation and provenance of thorium deposition observed at Tsukuba, Japan

International Nuclear Information System (INIS)

Hirose, Katsumi; Kikawada, Yoshikazu; Igarashi, Yasuhito

2012-01-01

Temporal variations of monthly thorium (Th) deposition observed at Tsukuba, Japan during the period 1990–2007, comparing with plutonium deposition, was studied. The monthly 232 Th deposition as did 239,240 Pu, varied according to season and inter-annually. In particular, 232 Th deposition increased significantly in spring coinciding with Asian dust (Kosa) events. The 230 Th/ 232 Th activity ratios vary according to sources and can therefore be used to differentiate between locally derived and remotely derived 232 Th. The 230 Th/ 232 Th activity ratios in deposition samples showed large variability with high ratios occurring in early spring. These high 230 Th/ 232 Th ratios in deposition can be attributed to local dust storms, especially in early spring, that cause resuspension of soils from cultivated fields which are characterized by high 230 Th/ 232 Th activity ratios. The results reveal that both locally and remotely derived 232 Th deposition showed seasonal variations with maxima in spring, although the remotely derived fraction is dominant rather than the locally derived one. The 232 Th deposition maxima later in spring is attributable to the remotely derived fraction, corresponding to the Kosa events. Annual 232 Th deposition exhibited an increasing trend, suggesting the presence of sources other than soil dust such as fly ash from increasing coal burning. - Highlights: ► We show monthly Th deposition observed at Tsukuba, Japan from 1990 to 2007. ► The Th deposition shows a seasonal variation and inter-annual variability. ► Th isotope ratios ( 230 Th/ 232 Th) are used to identify its sources. ► The long-term trend of Th deposition is related to increasing anthropogenic input.

Oral and public confrontation as guarantee of a democratic constitutional criminal procedure

Directory of Open Access Journals (Sweden)

Thiago Miranda Minagé

2017-10-01

Full Text Available Understanding the criminal process under the aegis of a Democratic State of Law requires, in addition to a critical re-reading of institutes already consolidated in a specific system model, it is still necessary to abandon them when they have legitimacy. It should be understood that the role to be played by the parties through the contradictory is fundamental and will never be possible without the support of orality and publicity of the acts. In order to control the observance of procedural safeguards, it is necessary to establish the contradictory as true guarantor of procedural guarantees. In order to do so, only the respective guarantees will be effective, when, all and any probative production is developed publicly and orally, through a procedural rite previously established in the law. To this end, the present work begins with an analysis of the inquisitive system and its permanent interference in our current criminal process, proposing an overcoming of the current system, which is the accusatory, in view of its inability to contain inquisitive interference, proposing a new Vision of system as a way of perfecting what was then valid, based on the premise of a change of the unifying principle in order to enhance the oral and publicity of the acts.

Deuterium trapping in tungsten deposition layers formed by deuterium plasma sputtering

International Nuclear Information System (INIS)

Alimov, V.Kh.; Roth, J.; Shu, W.M.; Komarov, D.A.; Isobe, K.; Yamanishi, T.

2010-01-01

A study of the influence of the deposition conditions on the surface morphology and deuterium (D) concentration in tungsten (W) deposition layers formed by magnetron sputtering and in the linear plasma generator has been carried out. Thick W layers (≥0.4 μm) deposited onto copper substrates demonstrate areas of pilling and, after post-deposition heating to 1300 K, flaking-off and fracturing. For thin W layers (≤80 nm) deposited onto stainless steel (SS) and W substrates, no areas of flaking-off and fracturing exist both after deposition and after post-deposition heating to 673 K for the SS substrate and to 1300 K for the W substrate. The concentration of deuterium in the W layers was found to decrease with increasing substrate temperature and with increasing tungsten deposition rate. For layers with relatively high concentration of oxygen (0.20-0.60 O/W), a decrease of the D concentration with increasing substrate temperature is more pronounced than that for layers deposited in good vacuum conditions. To describe the evolution of the D/W ratio with the substrate temperature and the tungsten deposition rate, an empirical equation proposed by De Temmerman and Doerner [J. Nucl. Mater. 389 (2009) 479] but with alternative parameters has been used.

Understanding the spectrum of diesel injector deposits

Energy Technology Data Exchange (ETDEWEB)

Quigley, Robert; Barbour, Robert [Lubrizol Limited, Derby (United Kingdom); Arters, David; Bush, Jim [Lubrizol Corporation, Wickliffe, OH (United States)

2013-06-01

Understanding the origin of diesel fuel injector deposits used to be relatively simple; for the most part they were caused by the decomposition of fuel during the combustion process, were generally organic in nature and typically only affected the nozzle orifices. However, modem fuel injector designs appear to be both more severe in terms of generating conditions conducive to creating new and different types of deposits and more likely to have their operation affected by those deposits. Changes to fuel composition and type have in some cases increased the potential pool of reactive species or provided new potential deposit precursors. As a result, the universe of diesel injector deposits now range from the traditional organic to partially or fully inorganic in nature and from nozzle coking deposits to deposits which can seize the internal components of the injector; so called internal diesel injector deposits. Frequently, combinations of inorganic and organic deposits are found. While power loss is one well known issue associated with nozzle deposits, other field problems resulting from these new deposits include severe issues with drivability, emissions, fuel consumption and even engine failure. Conventional deposit control additive chemistries were developed to be effective against organic nozzle coking deposits. These conventional additives in many cases may prove ineffective against this wide range of deposit types. This paper discusses the range of deposits that have been found to adversely impact modem diesel fuel injectors and compares the performance of conventional and new, advanced deposit control additives against these various challenges to proper fuel injector functioning. (orig.)

An Initial Econometric Consideration of Supply and Demand in the Guaranteed Student Loan Program.

Science.gov (United States)

Bayus, Barry; Kendis, Kurt

1982-01-01

In this econometric model of the Guaranteed Student Loan Program (GSLP), supply is related to banks' liquidity and yield curves, all lenders' economic costs and returns, and Student Loan Marketing Association activity. GSLP demand is based on loan costs, family debt position, and net student need for financial aid. (RW)

A novel soil manganese mechanism drives plant species loss with increased nitrogen deposition in a temperate steppe.

Science.gov (United States)

Tian, Qiuying; Liu, Nana; Bai, Wenming; Li, Linghao; Chen, Jiquan; Reich, Peter B; Yu, Qiang; Guo, Dali; Smith, Melinda D; Knapp, Alan K; Cheng, Weixin; Lu, Peng; Gao, Yan; Yang, An; Wang, Tianzuo; Li, Xin; Wang, Zhengwen; Ma, Yibing; Han, Xingguo; Zhang, Wen-Hao

2016-01-01

Loss of plant diversity with increased anthropogenic nitrogen (N) deposition in grasslands has occurred globally. In most cases, competitive exclusion driven by preemption of light or space is invoked as a key mechanism. Here, we provide evidence from a 9-yr N-addition experiment for an alternative mechanism: differential sensitivity of forbs and grasses to increased soil manganese (Mn) levels. In Inner Mongolia steppes, increasing the N supply shifted plant community composition from grass-forb codominance (primarily Stipa krylovii and Artemisia frigida, respectively) to exclusive dominance by grass, with associated declines in overall species richness. Reduced abundance of forbs was linked to soil acidification that increased mobilization of soil Mn, with a 10-fold greater accumulation of Mn in forbs than in grasses. The enhanced accumulation of Mn in forbs was correlated with reduced photosynthetic rates and growth, and is consistent with the loss of forb species. Differential accumulation of Mn between forbs and grasses can be linked to fundamental differences between dicots and monocots in the biochemical pathways regulating metal transport. These findings provide a mechanistic explanation for N-induced species loss in temperate grasslands by linking metal mobilization in soil to differential metal acquisition and impacts on key functional groups in these ecosystems.

CANOPY STRUCTURE AND DEPOSITION EFFICIENCY OF VINEYARD SPRAYERS

Directory of Open Access Journals (Sweden)

Gianfranco Pergher

2007-06-01

Full Text Available A field study was performed to analyse how deposition efficiency from an axial-fan sprayer was affected by the canopy structure of vines trained to the High Cordon, Low Cordon and Casarsa systems, at beginning of flowering and beginning of berry touch growth stages. An empirical calibration method, providing a dose rate adjustment roughly proportional to canopy height, was used. The canopy structure was assessed using the Point Quadrat method, and determining the leaf area index (LAI and the leaf layer index (LLI. Spray deposits were measured by colorimetry, using a water soluble dye (Tartrazine as a tracer. Correlation between deposits and canopy parameters were analysed and discussed. Foliar deposits per unit leaf area were relatively constant, suggesting that empirical calibration can reduce deposit variability associated with different training systems and growth stages. Total foliar deposition ranged from 33.6% and 82.3% of total spray volume, and increased proportionally with the LLI up to LLI<4. Deposits on bunches significantly decreased with the LLI in the grape zone. The results suggest that sprayer efficiency is improved by a regular, symmetrical canopy, with few leaf layers in the grape zone as in Low Cordon. However, a LLI<3 over the whole canopy and >40% gaps in the foliage both reduced total deposition, and may increase the risk for larger drift losses.

Reducing tube bundle deposition with alternative amines

International Nuclear Information System (INIS)

Turner, C.W.; Klimas, S.J.; Frattini, P.L.

1998-01-01

Particle deposition rates have been measured in a high-temperature loop for magnetite and hematite depositing onto Inconel-600 under flow-boiling conditions with pH controlled using one of the following amines: morpholine, ammonia, ethanolamine, or dimethylamine. Hematite particles deposited at rates an order of magnitude greater than those measured for magnetite, although the hematite deposition rate dropped when the loop was operated under reducing conditions. The magnetite deposition rate was influenced by the amine used to control the pH, with the relative rate decreasing in the following series: morpholine (1) : ethanolamine (0.72) ammonia (0.51) : dimethylamine (0.25). These trends in deposition rate are discussed in terms of the surface chemistry of the corrosion products. Deposition rates for both magnetite and hematite increased significantly once the mixture quality exceeded about 0.3, which may be related to a change in the heat transfer mechanism from nucleate boiling to two-phase forced convection through a thin film. (author)

Reducing tube bundle deposition using alternative amines

International Nuclear Information System (INIS)

Turner, C.W.; Klimas, S.J.; Frattini, P.L.

1999-07-01

Particle deposition rates were measured in a high-temperature loop for magnetite and hematite depositing onto Inconel-600 under flow-boiling conditions with pH controlled, using one of the following amines: morpholine, ammonia, ethanolamine, or dimethylamine. Hematite particles deposited at rates 10 times greater than those measured for magnetite although the hematite deposition rate dropped when the loop was operated under reducing conditions. The magnetite deposition rate was influenced by the amine used to control the pH, with the relative rate decreasing in the following series: morpholine (1) : ethanolamine (0.72) : ammonia (0.51) dimethylamine (0.25). These trends in deposition rate are discussed in terms of the surface chemistry of the corrosion products. Deposition rates for both magnetite and hematite increased significantly once the mixture quality exceeded about 0.3, which may be related to a change in the heat-transfer mechanism from nucleate boiling to 2-phase forced-convection through a thin film. (author)

Selective deposition contact patterning using atomic layer deposition for the fabrication of crystalline silicon solar cells

International Nuclear Information System (INIS)

Cho, Young Joon; Shin, Woong-Chul; Chang, Hyo Sik

2014-01-01

Selective deposition contact (SDC) patterning was applied to fabricate the rear side passivation of crystalline silicon (Si) solar cells. By this method, using screen printing for contact patterning and atomic layer deposition for the passivation of Si solar cells with Al 2 O 3 , we produced local contacts without photolithography or any laser-based processes. Passivated emitter and rear-contact solar cells passivated with ozone-based Al 2 O 3 showed, for the SDC process, an up-to-0.7% absolute conversion-efficiency improvement. The results of this experiment indicate that the proposed method is feasible for conversion-efficiency improvement of industrial crystalline Si solar cells. - Highlights: • We propose a local contact formation process. • Local contact forms a screen print and an atomic layer deposited-Al 2 O 3 film. • Ozone-based Al 2 O 3 thin film was selectively deposited onto patterned silicon. • Selective deposition contact patterning method can increase cell-efficiency by 0.7%

GE NANOCLUSTERS IN PLANAR GLASS WAVEGUIDES DEPOSITED BY PECVD

DEFF Research Database (Denmark)

Haiyan, Ou; Olsen, Johnny H.; Rottwitt, Karsten

2004-01-01

Germanium (Ge) has been widely used as the dopant in the core layer of planar glass waveguides to increase the refractive index because it gives a small propagation loss. Plasma enhanced chemical vapour deposition (PECVD) and flame hydrolysis deposition (FHD) are two main material deposition meth...

Properties of the fly ash from the Power Plant Dětmarovice from the point of view of their deposition in underground mines

Directory of Open Access Journals (Sweden)

Dirner Vojtech

2001-06-01

Full Text Available Mining for the Purposes of Disposal – Facilities, Requirements and Conceptions. Mining for the purposes of disposal can be instrumental in environmental protection in the future. Therefore the utilization of residues in the mining process has to be put into the foreground, whether they are a product of the mining activity itself or coming from other sources. It is possible to use the residual products as filling or building materials. Within the constantly increasing demand for building materials in the mines it is possible to combine the advantages that improve mine safety, rock mechanics and support with the secure long-term sealing of mineralized industrial residues in the lithosphere. Also the disposal of polluted, water-soluble and toxic or radioactive waste in a suitable geological formation underground can be realized ensuring long-term safety. This long-term safety is guaranteed by a multiple system of geological and technical barriers. The storage can b conducted in appropriate void space like chambers, caverns, drifts or boreholes with or without the opinion of retarding the material.Contribution is discussing the possibility of the deposition on fly ash produced by thermal power plants which are using low-grade brown coal as a fuel. Properties of fly ash were studied id detail on samples from Power Plant Dìtmarovice, northern Moravia.Results proved that fly ash can be deposited safely in underground.

Roughness evolution in Ga doped ZnO films deposited by pulsed laser deposition

International Nuclear Information System (INIS)

Liu Yunyan; Cheng Chuanfu; Yang Shanying; Song Hongsheng; Wei Gongxiang; Xue Chengshan; Wang Yongzai

2011-01-01

We analyze the morphology evolution of the Ga doped ZnO(GZO) films deposited on quartz substrates by a laser deposition system. The surface morphologies of the film samples grown with different times are measured by the atomic force microscope, and they are analyzed quantitatively by using the image data. In the initial stage of the growth time shorter than 8 min, our analysis shows that the GZO surface morphologies are influenced by such factors as the random fluctuations, the smoothening effects in the deposition, the lateral strain and the substrate. The interface width uw(t) and the lateral correlation length ξ(t) at first decrease with deposition time t. For the growth time larger than 8 min, w(t) and ξ(t) increase with time and it indicates the roughening of the surface and the surface morphology exhibits the fractal characteristics. By fitting data of the roughness w(t) versus deposition time t larger than 4 min to the power-law function, we obtain the growth exponent β is 0.3; and by the height-height correlation functions of the samples to that of the self-affine fractal model, we obtain the value of roughness exponent α about 0.84 for all samples with different growth time t.

Differences in the deposition of radionuclides to leafy vegetables

International Nuclear Information System (INIS)

Tschiersch, J.; Shinonaga, T.; Heuberger, H.; Bunzl, K.; Pliml, A.; Dietl, F.; Keusch, M.

2003-01-01

To quantify the variability in deposition to several species, the dry deposition of gaseous elemental radio-iodine and particulate radio-caesium on mature leafy vegetables was studied inside a deposition chamber by comparative experiments. The simultaneous exposition of endive, head lettuce, red oak leaf lettuce, curly kale, white cabbage and spinach was performed under homogeneous and controlled conditions ( 131 vertical stroke 2 -portion, particle median, stomata opening, air humidity and temperature). Significant differences were observed for the 131 vertical stroke deposition on spring vegetables: the deposition on spinach was roughly 3times that on leaf lettuce, 4times that on endive and 9times that on head lettuce. For 134 Cs, there was no significant difference between spinach and leaf lettuce, about twice the amount was deposited on both species as on endive and 3times as on head lettuce. All summer vegetables showed differences in deposition. For Iodine, the deposition on spinach was roughly 3times (6times) that on curly kale and 35times (100times) that on white cabbage in the 2 experiments. For Caesium, the deposition to curly kale was highest, about twice that on spinach and 35times (80times) that on white cabbage. The deposition was always the lowest on the closed heads of white cabbage and head lettuce. The many open stomata of spinach increased the efficiency of gaseous deposition. In addition, rough and crimpy leafs increased the particle deposition efficiency. The estimation of the deposition velocity showed that dry deposition was in average about 8times higher for 131 vertical stroke than for 134 Cs. The influence of the particle size on the deposition velocity was small in the considered size range. Washing could reduce the contamination by about 10% for 131 vertical stroke and 45% for 134 Cs. (orig.) [de

Enhancement of deposition rate at cryogenic temperature in synchrotron radiation excited deposition of silicon film

International Nuclear Information System (INIS)

Nara, Yasuo; Sugita, Yoshihiro; Ito, Takashi; Kato, Hiroo; Tanaka, Ken-ichiro

1989-01-01

The authors have investigated the synchrotron radiation excited deposition of silicon films on the SiO 2 substrate by using SiH 4 /He mixture gas at BL-12C at Photon Factory. They used VUV light from the multilayer mirror with the center photon energy from 97 to 123eV, which effectively excites L-core electrons of silicon. Substrate temperature was widely varied from -178 degree C to 500 degree C. At -178 degree C, the deposition rate was as high as 400nm/200mAHr (normalized at the storage ring current at 200mA). As increasing the substrate temperature, the deposition rate was drastically decreased. The number of deposited silicon atoms is estimated to be 4 to 50% of incident photons, while the number of photo generated species in the gas phase within the mean free path from the surface is calculated as few as about 10 -3 of incident photons. These experimental results show that the deposition reaction is governed by the dissociation of surface adsorbates by the synchrotron radiation

Surface modification of reverse osmosis desalination membranes by thin-film coatings deposited by initiated chemical vapor deposition

Energy Technology Data Exchange (ETDEWEB)

Ozaydin-Ince, Gozde, E-mail: gozdeince@sabanciuniv.edu [Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Matin, Asif, E-mail: amatin@mit.edu [Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia); Khan, Zafarullah, E-mail: zukhan@mit.edu [Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia); Zaidi, S.M. Javaid, E-mail: zaidismj@kfupm.edu.sa [Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia); Gleason, Karen K., E-mail: kkgleasn@mit.edu [Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139 (United States)

2013-07-31

Thin-film polymeric reverse osmosis membranes, due to their high permeation rates and good salt rejection capabilities, are widely used for seawater desalination. However, these membranes are prone to biofouling, which affects their performance and efficiency. In this work, we report a method to modify the membrane surface without damaging the active layer or significantly affecting the performance of the membrane. Amphiphilic copolymer films of hydrophilic hydroxyethylmethacrylate and hydrophobic perfluorodecylacrylate (PFA) were synthesized and deposited on commercial RO membranes using an initiated chemical vapor deposition technique which is a polymer deposition technique that involves free-radical polymerization initiated by gas-phase radicals. Relevant surface characteristics such as hydrophilicity and roughness could be systematically controlled by varying the polymer chemistry. Increasing the hydrophobic PFA content in the films leads to an increase in the surface roughness and hydrophobicity. Furthermore, the surface morphology studies performed using the atomic force microscopy show that as the thickness of the coating increases average surface roughness increases. Using this knowledge, the coating thickness and chemistry were optimized to achieve high permeate flux and to reduce cell attachment. Results of the static bacterial adhesion tests show that the attachment of bacterial cells is significantly reduced on the coated membranes. - Highlights: • Thin films are deposited on reverse osmosis membranes. • Amphiphilic thin films are resistant to protein attachment. • The permeation performance of the membranes is not affected by the coating. • The thin film coatings delayed the biofouling.

20 CFR 703.306 - Kinds of negotiable securities that may be deposited; conditions of deposit; acceptance of deposits.

Science.gov (United States)

2010-04-01

... the Act in the amount fixed by the Office under the regulations in this part shall deposit any... deposited; conditions of deposit; acceptance of deposits. 703.306 Section 703.306 Employees' Benefits... negotiable securities that may be deposited; conditions of deposit; acceptance of deposits. A self-insurer or...

Simulation of Contamination Deposition on Typical Shed Porcelain Insulators

Directory of Open Access Journals (Sweden)

Yukun Lv

2017-07-01

Full Text Available The contamination deposition characteristics of insulators can be used in the development of antifouling work. Using COMSOL software, numerical simulations on the pollution-deposited performance of a porcelain three-umbrella insulator and porcelain bell jar insulator in a wind tunnel were conducted, and the simulated results were compared with the tested results. The comparison shows that the deposit amount is consistent with the order of magnitude and presents a similar tendency with Direct Current (DC voltage variation; then the rationality of the simulation is verified. Based on these results, simulations of the natural contamination deposition on porcelain insulators and the distribution of pollution along the umbrella skirt were performed. The results indicates that, under a same wind speed, contamination of the porcelain three-umbrella insulator and porcelain bell jar insulator under DC voltage was positively correlated with the particle size. With the same particle size, the proportion of the deposit amount under DC voltage (NSDDDC to the deposit amount under AC voltage (NSDDAC of both insulators decreases with the increase in wind speed. However, the ratio increases as particle size increase. At a small wind speed, the deposit amount along the umbrella skirt of the two insulators displays a U-shaped distribution under DC voltage while there is little difference in the contamination amount of each skirt under Alternating Current (AC voltage.

Atmospheric nitrogen deposition in world biodiversity hotspots: the need for a greater global perspective in assessing N deposition impacts

NARCIS (Netherlands)

Phoenix, G.K.; Hicks, W.K.; Cinderby, S.; Kuylenstierna, J.C.I.; Stock, W.D.; Dentener, F.J.; Giller, K.E.; Austin, A.T.; Lefroy, R.D.B.; Gimeno, B.S.; Ashmore, M.R.; Ineson, P.

2006-01-01

Increased atmospheric nitrogen (N) deposition is known to reduce plant diversity in natural and semi-natural ecosystems, yet our understanding of these impacts comes almost entirely from studies in northern Europe and North America. Currently, we lack an understanding of the threat of N deposition

Hybrid inorganic–organic superlattice structures with atomic layer deposition/molecular layer deposition

Energy Technology Data Exchange (ETDEWEB)

Tynell, Tommi; Yamauchi, Hisao; Karppinen, Maarit, E-mail: maarit.karppinen@aalto.fi [Department of Chemistry, Aalto University, FI-00076 Aalto (Finland)

2014-01-15

A combination of the atomic layer deposition (ALD) and molecular layer deposition (MLD) techniques is successfully employed to fabricate thin films incorporating superlattice structures that consist of single layers of organic molecules between thicker layers of ZnO. Diethyl zinc and water are used as precursors for the deposition of ZnO by ALD, while three different organic precursors are investigated for the MLD part: hydroquinone, 4-aminophenol and 4,4′-oxydianiline. The successful superlattice formation with all the organic precursors is verified through x-ray reflectivity studies. The effects of the interspersed organic layers/superlattice structure on the electrical and thermoelectric properties of ZnO are investigated through resistivity and Seebeck coefficient measurements at room temperature. The results suggest an increase in carrier concentration for small concentrations of organic layers, while higher concentrations seem to lead to rather large reductions in carrier concentration.

Tsunami deposits

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

The NSC (the Nuclear Safety Commission of Japan) demand to survey on tsunami deposits by use of various technical methods (Dec. 2011), because tsunami deposits have useful information on tsunami activity, tsunami source etc. However, there are no guidelines on tsunami deposit survey in JAPAN. In order to prepare the guideline of tsunami deposits survey and evaluation and to develop the method of tsunami source estimation on the basis of tsunami deposits, JNES carried out the following issues; (1) organizing information of paleoseismological record and tsunami deposit by literature research, (2) field survey on tsunami deposit, and (3) designing the analysis code of sediment transport due to tsunami. As to (1), we organize the information gained about tsunami deposits in the database. As to (2), we consolidate methods for surveying and identifying tsunami deposits in the lake based on results of the field survey in Fukui Pref., carried out by JNES. In addition, as to (3), we design the experimental instrument for hydraulic experiment on sediment transport and sedimentation due to tsunamis. These results are reflected in the guideline on the tsunami deposits survey and evaluation. (author)

Tsunami deposits

International Nuclear Information System (INIS)

2013-01-01

The NSC (the Nuclear Safety Commission of Japan) demand to survey on tsunami deposits by use of various technical methods (Dec. 2011), because tsunami deposits have useful information on tsunami activity, tsunami source etc. However, there are no guidelines on tsunami deposit survey in JAPAN. In order to prepare the guideline of tsunami deposits survey and evaluation and to develop the method of tsunami source estimation on the basis of tsunami deposits, JNES carried out the following issues; (1) organizing information of paleoseismological record and tsunami deposit by literature research, (2) field survey on tsunami deposit, and (3) designing the analysis code of sediment transport due to tsunami. As to (1), we organize the information gained about tsunami deposits in the database. As to (2), we consolidate methods for surveying and identifying tsunami deposits in the lake based on results of the field survey in Fukui Pref., carried out by JNES. In addition, as to (3), we design the experimental instrument for hydraulic experiment on sediment transport and sedimentation due to tsunamis. These results are reflected in the guideline on the tsunami deposits survey and evaluation. (author)

An Optimal Turkish Private Pension Plan with a Guarantee Feature

Directory of Open Access Journals (Sweden)

Ayşegül İşcanog̃lu-Çekiç

2016-06-01

Full Text Available The Turkish Private Pension System is an investment system which aims to generate income for future consumption. This is a volunteer system, and the contributions are held in individual portfolios. Therefore, management of the funds is an important issue for both the participants and the insurance company. In this study, we propose an optimal private pension plan with a guarantee feature that is based on Constant Proportion Portfolio Insurance (CPPI. We derive a closed form formula for the optimal strategy with the help of dynamic programming. Moreover, our model is evaluated with numerical examples, and we compare its performance by implementing a sensitivity analysis.

Communication Framework for Tele-rehabilitation Systems with QoS Guarantee

Directory of Open Access Journals (Sweden)

Dandanov Nikolay

2017-01-01

Full Text Available Nowadays, there is great interest in developing telemedicine technologies. These technologies will provide health care from distance swiftly and lightly, as well as reduce the expenses for activities, such as rehabilitation. Telemedicine applications are possible due to the advances in information technologies and the ever-expanding communication network infrastructure. The network characteristics bandwidth, packet loss, latency, jitter and policies are crucial for the performance of tele-rehabilitation systems. Because in tele-rehabilitation human lives are at stake, guaranteeing the Quality of Service (QoS is important. In this paper, an approach for assuring the QoS for information transmission in tele-rehabilitation systems is proposed.

Process-structure-property relationships of micron thick gadolinium oxide films deposited by reactive electron beam-physical vapor deposition (EB-PVD)

Science.gov (United States)

Grave, Daniel A.

Gadolinium oxide (Gd2O3) is an attractive material for solid state neutron detection due to gadolinium's high thermal neutron capture cross section. Development of neutron detectors based on Gd2 O3 requires sufficiently thick films to ensure neutron absorption. In this dissertation work, the process-structure-property relationships of micron thick Gd2O3 films deposited by reactive electron-beam physical vapor deposition (EB-PVD) were studied. Through a systematic design of experiments, fundamental studies were conducted to determine the effects of processing conditions such as deposition temperature, oxygen flow rate, deposition rate, and substrate material on Gd2O3 film crystallographic phase, texture, morphology, grain size, density, and surface roughness. Films deposited at high rates (> 5 A/s) were examined via x-ray diffraction (XRD) and Raman spectroscopy. Quantitative phase volume calculations were performed via a Rietveld refinement technique. All films deposited at high rates were found to be fully monoclinic or mixed cubic/monoclinic phase. Generally, increased deposition temperature and increased oxygen flow resulted in increased cubic phase volume. As film thickness increased, monoclinic phase volume increased. Grazing incidence x-ray diffraction (GIXRD) depth profiling analysis showed that cubic phase was only present under large incidence angle (large penetration depth) measurements, and after a certain point, only monoclinic phase was grown. This was confirmed by transmission electron microscopy (TEM) analysis with selected area diffraction (SAD). Based on this information, a large compressive stress was hypothesized to cause the formation of the monoclinic phase and this hypothesis was confirmed by demonstrating the existence of a stress induced phase transition. An experiment was designed to introduce compressive stress into the Gd2O 3 films via ion beam assisted deposition (IBAD). This allowed for systematic increase in compressive stress while

Photosynthetic performance in Sphagnum transplanted along a latitudinal nitrogen deposition gradient.

Science.gov (United States)

Granath, Gustaf; Strengbom, Joachim; Breeuwer, Angela; Heijmans, Monique M P D; Berendse, Frank; Rydin, Håkan

2009-04-01

Increased N deposition in Europe has affected mire ecosystems. However, knowledge on the physiological responses is poor. We measured photosynthetic responses to increasing N deposition in two peatmoss species (Sphagnum balticum and Sphagnum fuscum) from a 3-year, north-south transplant experiment in northern Europe, covering a latitudinal N deposition gradient ranging from 0.28 g N m(-2) year(-1) in the north, to 1.49 g N m(-2) year(-1) in the south. The maximum photosynthetic rate (NP(max)) increased southwards, and was mainly explained by tissue N concentration, secondly by allocation of N to the photosynthesis, and to a lesser degree by modified photosystem II activity (variable fluorescence/maximum fluorescence yield). Although climatic factors may have contributed, these results were most likely attributable to an increase in N deposition southwards. For S. fuscum, photosynthetic rate continued to increase up to a deposition level of 1.49 g N m(-2) year(-1), but for S. balticum it seemed to level out at 1.14 g N m(-2) year(-1). The results for S. balticum suggested that transplants from different origin (with low or intermediate N deposition) respond differently to high N deposition. This indicates that Sphagnum species may be able to adapt or physiologically adjust to high N deposition. Our results also suggest that S. balticum might be more sensitive to N deposition than S. fuscum. Surprisingly, NP(max) was not (S. balticum), or only weakly (S. fuscum) correlated with biomass production, indicating that production is to a great extent is governed by factors other than the photosynthetic capacity.

Analysis of graphite dust deposition in hot gas duct of HTGR

International Nuclear Information System (INIS)

Peng Wei; Zhen Ya'nan; Yang Xiaoyong; Ye Ping

2013-01-01

The behavior of the graphite dust is important to the safety of high-temperature gas-cooled reactor (HTGR). The temperature field in hot gas duct was obtained using computational fluid dynamics (CFD) method. Further analysis to the thermo-phoretic deposition and turbulent deposition shows that as the dust particle diameter increases, the thermo-phoretic deposition efficiency decreases, and the turbulent deposition efficiency initially decreases and then increases. The comparisons of calculation results for two reactor powers, namely 30% FP (full power) and 100 % FP, indicate that the thermo-phoretic deposition efficiency is higher at 30% FP than that at 100% FP. while the turbulent deposition efficiency grows more rapidly at 100% FP. Besides, the results also demonstrate that the thermo-phoretic deposition and the turbulent deposition are nearly equivalent when particle sizes are small, while the turbulent deposition becomes dominant when particle sizes are fairly large. The calculation results by using the most probable distribution of particle size show that the total deposition of graphite dusts in hot gas duct is limited. (authors)

Deposition barium titanate (BaTiO3) doped lanthanum with chemical solution deposition

International Nuclear Information System (INIS)

Iriani, Y.; Nurhadi, N.; Jamaludin, A.

2016-01-01

Deposition of Barium Titanate (BaTiO 3 ) thin films used Chemical Solution Deposition (CSD) method and prepared with spin coater. BaTiO 3 is doped with lanthanum, 1%, 2%, and 3%. The thermal process use annealing temperature 900°C and holding time for 3 hours. The result of characterization with x-ray diffraction (XRD) equipment show that the addition of La 3+ doped on Barium Titanate caused the change of angle diffraction.The result of refine with GSAS software shows that lanthanum have been included in the structure of BaTiO 3 . Increasing mol dopant La 3+ cause lattice parameter and crystal volume become smaller. Characterization result using Scanning Electron Microscopy (SEM) equipment show that grain size (grain size) become smaller with increasing mole dopant (x) La 3+ . The result of characterization using Sawyer Tower methods show that all the samples (Barium Titanante and Barium Titanate doped lanthanum) are ferroelectric material. Increasing of mole dopant La 3+ cause smaller coercive field and remanent polarization increases. (paper)

Comparison of stress in single and multiple layer depositions of plasma-deposited amorphous silicon dioxide

International Nuclear Information System (INIS)

Au, V; Charles, C; Boswell, R W

2006-01-01

The stress in a single-layer continuous deposition of amorphous silicon dioxide (SiO 2 ) film is compared with the stress within multiple-layer intermittent or 'stop-start' depositions. The films were deposited by helicon activated reactive evaporation (plasma assisted deposition with electron beam evaporation source) to a 1 μm total film thickness. The relationships for stress as a function of film thickness for single, two, four and eight layer depositions have been obtained by employing the substrate curvature technique on a post-deposition etch-back of the SiO 2 film. At film thicknesses of less than 300 nm, the stress-thickness relationships clearly show an increase in stress in the multiple-layer samples compared with the relationship for the single-layer film. By comparison, there is little variation in the film stress between the samples when it is measured at 1 μm film thickness. Localized variations in stress were not observed in the regions where the 'stop-start' depositions occurred. The experimental results are interpreted as a possible indication of the presence of unstable, strained Si-O-Si bonds in the amorphous SiO 2 film. It is proposed that the subsequent introduction of a 'stop-start' deposition process places additional strain on these bonds to affect the film structure. The experimental stress-thickness relationships were reproduced independently by assuming a linear relationship between the measured bow and film thickness. The constants of the linear model are interpreted as an indication of the density of the amorphous film structure

Long-term trends of sulfur deposition in East Asia during 1981-2005

Science.gov (United States)

Kuribayashi, Masatoshi; Ohara, Toshimasa; Morino, Yu; Uno, Itsushi; Kurokawa, Jun-ichi; Hara, Hiroshi

2012-11-01

We used a chemical transport model to investigate the long-term trends of sulfur deposition in East Asia during 1981-2005. The model reproduced the observed spatial distributions in East Asia of the rate of wet deposition of non-seasalt sulfate (nss-SO42-), volume-weighted mean concentrations of nss-SO42- in precipitation, precipitation, and concentrations in air of gaseous sulfur dioxide and particulate nss-SO42-. The model also reproduced well observed seasonal variations and long-term trends of wet deposition of nss-SO42- in Japan from 1988 to 2005. The increasing rate of wet deposition of nss-SO42- in Japan during 1991-2005 was demonstrated with 99.9% significance for both observed and modeled data. The annual rate of total (wet + dry) sulfur deposition in Japan increased from 15.6 Gmol S y-1 in 1981-1985 to 23.9 Gmol S y-1 in 2001-2005 in response to both increasing contributions from Chinese emissions and the eruption of Miyakejima volcano in 2000. During that 25-year period, approximately 2.1% of the sulfur from Chinese emissions was deposited in Japan. Over the same period, the rate of deposition of sulfur in East Asia increased gradually from 14.2 mmol S m-2 y-1 to 24.0 mmol S m-2 y-1, and the contribution of emissions from China to total sulfur deposition in East Asia increased from 65% to 77%. The contribution of Miyakejima volcano was 3% during 2001-2005. The increase in the sulfur deposition rate was remarkably high on the North China Plain, around Guangzhou, and south of Chongqing. The rate of increase in East Asia was greatest in winter, although the rate of sulfur deposition was highest in summer. Sulfur flux from China to Japan increased by a factor of 2.5 at altitudes of 0-3000 m from 1981 to 2005.

Delay-Dependent Guaranteed Cost Control of an Interval System with Interval Time-Varying Delay

Directory of Open Access Journals (Sweden)

Xiao Min

2009-01-01

Full Text Available This paper concerns the problem of the delay-dependent robust stability and guaranteed cost control for an interval system with time-varying delay. The interval system with matrix factorization is provided and leads to less conservative conclusions than solving a square root. The time-varying delay is assumed to belong to an interval and the derivative of the interval time-varying delay is not a restriction, which allows a fast time-varying delay; also its applicability is broad. Based on the Lyapunov-Ktasovskii approach, a delay-dependent criterion for the existence of a state feedback controller, which guarantees the closed-loop system stability, the upper bound of cost function, and disturbance attenuation lever for all admissible uncertainties as well as out perturbation, is proposed in terms of linear matrix inequalities (LMIs. The criterion is derived by free weighting matrices that can reduce the conservatism. The effectiveness has been verified in a number example and the compute results are presented to validate the proposed design method.

Process maps for plasma spray. Part II: Deposition and properties

International Nuclear Information System (INIS)

XIANGYANG, JIANG; MATEJICEK, JIRI; KULKARNI, ANAND; HERMAN, HERBERT; SAMPATH, SANJAY; GILMORE, DELWYN L.; NEISER A, RICHARD Jr.

2000-01-01

This is the second paper of a two part series based on an integrated study carried out at the State University of New York at Stony Brook and Sandia National Laboratories. The goal of the study is the fundamental understanding of the plasma-particle interaction, droplet/substrate interaction, deposit formation dynamics and microstructure development as well as the deposit property. The outcome is science-based relationships, which can be used to link processing to performance. Molybdenum splats and coatings produced at 3 plasma conditions and three substrate temperatures were characterized. It was found that there is a strong mechanical/thermal interaction between droplet and substrate, which builds up the coatings/substrate adhesion. Hardness, thermal conductivity, and modulus increase, while oxygen content and porosity decrease with increasing particle velocity. Increasing deposition temperature resulted in dramatic improvement in coating thermal conductivity and hardness as well as increase in coating oxygen content. Indentation reveals improved fracture resistance for the coatings prepared at higher deposition temperature. Residual stress was significantly affected by deposition temperature, although not significant by particle energy within the investigated parameter range. Coatings prepared at high deposition temperature with high-energy particles suffered considerably less damage in wear tests. Possible mechanisms behind these changes are discussed within the context of relational maps which are under development

Silver deposition on chemically treated carbon monolith

Directory of Open Access Journals (Sweden)

Jovanović Zoran M.

2009-01-01

Full Text Available Carbon monolith was treated with HNO3, KOH and H2O2. Effects of these treatments on the surface functional groups and on the amount of silver deposited on the CM surface were studied by temperature programmed desorption (TPD and atomic absorption spectrometry (AAS. As a result of chemical treatment there was an increase in the amount of surface oxygen complexes. The increase in the amount of silver deposit is proportional to the amount of surface groups that produce CO under decomposition. However, the high amount of CO groups, decomposing above 600°C, induces the smaller Ag crystallite size. Therefore, the high temperature CO evolving oxides are, most likely, the initial centers for Ag deposition.

Compensation of decreased ion energy by increased hydrogen dilution in plasma deposition of thin film silicon solar cells at low substrate temperatures

NARCIS (Netherlands)

Verkerk, A.D.; de Jong, M.M.; Rath, J.K.; Brinza, M.; Schropp, R.E.I.; Goedheer, W.J.; Krzhizhanovskaya, V.V.; Gorbachev, Y.E.; Orlov, K.E.; Khilkevitch, E.M.; Smirnov, A.S.

2009-01-01

In order to deposit thin film silicon solar cells on plastics and papers, the deposition process needs to be adapted for low deposition temperatures. In a very high frequency plasma-enhanced chemical vapor deposition (VHF PECVD) process, both the gas phase and the surface processes are affected by

PERFIL DE RIESGO DE LAS COOPERATIVAS DE CRÉDITO ESPAÑOLAS: IMPLICACIONES EN EL COSTE DEL SEGURO DE DEPÓSITO / RISK PROFILE OF SPANISH CREDIT COOPERATIVES: IMPLICATIONS FOR THE COST OF DEPOSIT INSURANCE

Directory of Open Access Journals (Sweden)

Antonio PARTAL UREÑA

2012-09-01

Full Text Available La reforma propuesta por la Comisión Europea en julio de 2010, modificando el procedimiento para fijar las aportaciones que deben realizar las entidades de crédito a los sistemas de garantía de depósitos en función de su nivel de riesgo, supondrá cambios sustanciales en las cuotas que pagan actualmente. Este trabajo analiza el perfil de riesgo de las cooperativas españolas durante el período 2007-2010 y cuantifica su efecto sobre las contribuciones al Fondo de Garantía de Depósitos de Entidades de Crédito (FGDEC aplicando la metodología desarrollada por la Comisión. El estudio concluye con importantes evidencias sobre la evolución del perfil de riesgo del sector durante un periodo de recesión económica y el impacto de esta reforma, valorado a través del número de entidades que aumentarían su aportación y las variaciones en el coste del seguro respecto al sistema vigente. / The reform proposed by the European Commission in July 2010, modifying the procedure for determining the contributions which the banks must make to the deposit guarantee systems according to their level of risk will imply substantial changes in the fees currently paid. This paper analyzes the risk profile of Spanish cooperatives during 2007-2010 and quantifies their effect on contributions to the Deposit Guarantee Fund for Credit Institutions (FGDEC using the methodology proposed by the Commission. The study concludes with important evidence about the evolution of the risk profile of the sector in a period of economic recession and the impact of this reform, measured by means of the number of entities that would increase their input and variations in the cost of insurance in relation to the current system.

Responses of Surface Ozone Air Quality to Anthropogenic Nitrogen Deposition

Science.gov (United States)

Zhang, L.; Zhao, Y.; Tai, A. P. K.; Chen, Y.; Pan, Y.

2017-12-01

Human activities have substantially increased atmospheric deposition of reactive nitrogen to the Earth's surface, inducing unintentional effects on ecosystems with complex environmental and climate consequences. One consequence remaining unexplored is how surface air quality might respond to the enhanced nitrogen deposition through surface-atmosphere exchange. We combine a chemical transport model (GEOS-Chem) and a global land model (Community Land Model) to address this issue with a focus on ozone pollution in the Northern Hemisphere. We consider three processes that are important for surface ozone and can be perturbed by addition of atmospheric deposited nitrogen: emissions of biogenic volatile organic compounds (VOCs), ozone dry deposition, and soil nitrogen oxide (NOx) emissions. We find that present-day anthropogenic nitrogen deposition (65 Tg N a-1 to the land), through enhancing plant growth (represented as increases in vegetation leaf area index (LAI) in the model), could increase surface ozone from increased biogenic VOC emissions, but could also decrease ozone due to higher ozone dry deposition velocities. Meanwhile, deposited anthropogenic nitrogen to soil enhances soil NOx emissions. The overall effect on summer mean surface ozone concentrations show general increases over the globe (up to 1.5-2.3 ppbv over the western US and South Asia), except for some regions with high anthropogenic NOx emissions (0.5-1.0 ppbv decreases over the eastern US, Western Europe, and North China). We compare the surface ozone changes with those driven by the past 20-year climate and historical land use changes. We find that the impacts from anthropogenic nitrogen deposition can be comparable to the climate and land use driven surface ozone changes at regional scales, and partly offset the surface ozone reductions due to land use changes reported in previous studies. Our study emphasizes the complexity of biosphere-atmosphere interactions, which can have important

75 FR 17303 - Section 108 Community Development Loan Guarantee Program: Participation of States as Borrowers...

Science.gov (United States)

2010-04-06

... with access to long-term (up to 20-year) fixed-rate loans at relatively low interest rates to finance certain categories of eligible CDBG projects. Historically, section 108 guarantee authority has been... local governments in nonentitlement areas. The July 22, 2009, interim rule implemented the expansion of...

Structural and Magnetic Properties of Mn doped ZnO Thin Film Deposited by Pulsed Laser Deposition

KAUST Repository

Baras, Abdulaziz

2011-07-01

Diluted magnetic oxide (DMO) research is a growing field of interdisciplinary study like spintronic devices and medical imaging. A definite agreement among researchers concerning the origin of ferromagnetism in DMO has yet to be reached. This thesis presents a study on the structural and magnetic properties of DMO thin films. It attempts to contribute to the understanding of ferromagnetism (FM) origin in DMO. Pure ZnO and Mn doped ZnO thin films have been deposited by pulsed laser deposition (PLD) using different deposition conditions. This was conducted in order to correlate the change between structural and magnetic properties. Structural properties of the films were characterized using x-ray diffraction (XRD) and scanning electron microscopy (SEM). The superconducting quantum interference device (SQUID) was used to investigate the magnetic properties of these films. The structural characterizations showed that the quality of pure ZnO and Mn doped ZnO films increased as oxygen pressure (PO) increased during deposition. All samples were insulators. In Mn doped films, Mn concentration decreased as PO increased. The Mn doped ZnO samples were deposited at 600˚C and oxygen pressure from 50-500mTorr. All Mn doped films displayed room temperature ferromagnetism (RTFM). However, at 5 K a superparamagnetic (SPM) behavior was observed in these samples. This result was accounted for by the supposition that there were secondary phase(s) causing the superparamagnetic behavior. Our findings hope to strengthen existing research on DMO origins and suggest that secondary phases are the core components that suppress the ferromagnetism. Although RTFM and SPM at low temperature has been observed in other systems (e.g., Co doped ZnO), we are the first to report this behavior in Mn doped ZnO. Future research might extend the characterization and exploration of ferromagnetism in this system.

Photocatalytic activity of tin-doped TiO{sub 2} film deposited via aerosol assisted chemical vapor deposition

Energy Technology Data Exchange (ETDEWEB)

Chua, Chin Sheng, E-mail: cschua@simtech.a-star.edu.sg [School of Electrical and Electronic Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798 (Singapore); Singapore Institute of Manufacturing Technology, 71 Nanyang Drive, 638075 (Singapore); Tan, Ooi Kiang; Tse, Man Siu [School of Electrical and Electronic Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798 (Singapore); Ding, Xingzhao [Singapore Institute of Manufacturing Technology, 71 Nanyang Drive, 638075 (Singapore)

2013-10-01

Tin-doped TiO{sub 2} films are deposited via aerosol assisted chemical vapor deposition using a precursor mixture composing of titanium tetraisopropoxide and tetrabutyl tin. The amount of tin doping in the deposited films is controlled by the volume % concentration ratio of tetrabutyl tin over titanium tetraisopropoxide in the mixed precursor solution. X-ray diffraction analysis results reveal that the as-deposited films are composed of pure anatase TiO{sub 2} phase. Red-shift in the absorbance spectra is observed attributed to the introduction of Sn{sup 4+} band states below the conduction band of TiO{sub 2}. The effect of tin doping on the photocatalytic property of TiO{sub 2} films is studied through the degradation of stearic acid under UV light illumination. It is found that there is a 10% enhancement on the degradation rate of stearic acid for the film with 3.8% tin doping in comparison with pure TiO{sub 2} film. This improvement of photocatalytic performance with tin incorporation could be ascribed to the reduction of electron-hole recombination rate through charge separation and an increased amount of OH radicals which are crucial for the degradation of stearic acid. Further increase in tin doping results in the formation of recombination site and large anatase grains, which leads to a decrease in the degradation rate. - Highlights: ► Deposition of tin-doped TiO{sub 2} film via aerosol assisted chemical vapor deposition ► Deposited anatase films show red-shifted in UV–vis spectrum with tin-dopants. ► Photoactivity improves at low tin concentration but reduces at higher concentration. ► Improvement in photoactivity due to bandgap narrowing from Sn{sup 4+} band states ► Maximum photoactivity achieved occurs for films with 3.8% tin doping.

75 FR 5902 - Guarantees for Bonds and Notes Issued for Electrification or Telephone Purposes

Science.gov (United States)

2010-02-05

... Submission Form,'' must be completed. (If you click on the hyperlink of the docket when the search returns it.... 3. Amend Sec. 1720.3 by adding the definition of ``Eligible Loan'' to read as follows: Sec. 1720.3 Definitions. * * * * * Eligible Loan means a loan that a guaranteed lender extends to a borrower for up to 100...

The structural properties of CdS deposited by chemical bath deposition and pulsed direct current magnetron sputtering

Energy Technology Data Exchange (ETDEWEB)

Lisco, F., E-mail: F.Lisco@lboro.ac.uk [Centre for Renewable Energy Systems Technology (CREST), School of Electronic, Electrical and Systems Engineering, Loughborough University, Leicestershire, LE11 3TU (United Kingdom); Kaminski, P.M.; Abbas, A.; Bass, K.; Bowers, J.W.; Claudio, G. [Centre for Renewable Energy Systems Technology (CREST), School of Electronic, Electrical and Systems Engineering, Loughborough University, Leicestershire, LE11 3TU (United Kingdom); Losurdo, M. [Institute of Inorganic Methodologies and of Plasmas, IMIP-CNR, via Orabona 4, 70126 Bari (Italy); Walls, J.M. [Centre for Renewable Energy Systems Technology (CREST), School of Electronic, Electrical and Systems Engineering, Loughborough University, Leicestershire, LE11 3TU (United Kingdom)

2015-05-01

Cadmium sulphide (CdS) thin films were deposited by two different processes, chemical bath deposition (CBD), and pulsed DC magnetron sputtering (PDCMS) on fluorine doped-tin oxide coated glass to assess the potential advantages of the pulsed DC magnetron sputtering process. The structural, optical and morphological properties of films obtained by CBD and PDCMS were investigated using X-ray photoelectron spectroscopy, X-ray diffraction, scanning and transmission electron microscopy, spectroscopic ellipsometry and UV-Vis spectrophotometry. The as-grown films were studied and comparisons were drawn between their morphology, uniformity, crystallinity, and the deposition rate of the process. The highest crystallinity is observed for sputtered CdS thin films. The absorption in the visible wavelength increased for PDCMS CdS thin films, due to the higher density of the films. The band gap measured for the as-grown CBD-CdS is 2.38 eV compared to 2.34 eV for PDCMS-CdS, confirming the higher density of the sputtered thin film. The higher deposition rate for PDCMS is a significant advantage of this technique which has potential use for high rate and low cost manufacturing. - Highlights: • Pulsed DC magnetron sputtering (PDCMS) of CdS films • Chemical bath deposition of CdS films • Comparison between CdS thin films deposited by chemical bath and PDCMS techniques • High deposition rate deposition for PDCMS deposition • Uniform, pinhole free CdS thin films.

The structural properties of CdS deposited by chemical bath deposition and pulsed direct current magnetron sputtering

International Nuclear Information System (INIS)

Lisco, F.; Kaminski, P.M.; Abbas, A.; Bass, K.; Bowers, J.W.; Claudio, G.; Losurdo, M.; Walls, J.M.

2015-01-01

Cadmium sulphide (CdS) thin films were deposited by two different processes, chemical bath deposition (CBD), and pulsed DC magnetron sputtering (PDCMS) on fluorine doped-tin oxide coated glass to assess the potential advantages of the pulsed DC magnetron sputtering process. The structural, optical and morphological properties of films obtained by CBD and PDCMS were investigated using X-ray photoelectron spectroscopy, X-ray diffraction, scanning and transmission electron microscopy, spectroscopic ellipsometry and UV-Vis spectrophotometry. The as-grown films were studied and comparisons were drawn between their morphology, uniformity, crystallinity, and the deposition rate of the process. The highest crystallinity is observed for sputtered CdS thin films. The absorption in the visible wavelength increased for PDCMS CdS thin films, due to the higher density of the films. The band gap measured for the as-grown CBD-CdS is 2.38 eV compared to 2.34 eV for PDCMS-CdS, confirming the higher density of the sputtered thin film. The higher deposition rate for PDCMS is a significant advantage of this technique which has potential use for high rate and low cost manufacturing. - Highlights: • Pulsed DC magnetron sputtering (PDCMS) of CdS films • Chemical bath deposition of CdS films • Comparison between CdS thin films deposited by chemical bath and PDCMS techniques • High deposition rate deposition for PDCMS deposition • Uniform, pinhole free CdS thin films

Gasoline from Kumkol deposit petroleum

International Nuclear Information System (INIS)

Nadirov, A.N.; Zhizhin, N.I.; Musaeva, Z.G.

1997-01-01

Samples of gasoline from petroleum of Kumkol deposit are investigated by chromatographic analysis. It is found, that gasoline is characterizing by increased content of iso-paraffin hydrocarbons. (author)

Passive Guaranteed Simulation of Analog Audio Circuits: A Port-Hamiltonian Approach

Directory of Open Access Journals (Sweden)

Antoine Falaize

2016-09-01

Full Text Available We present a method that generates passive-guaranteed stable simulations of analog audio circuits from electronic schematics for real-time issues. On one hand, this method is based on a continuous-time power-balanced state-space representation structured into its energy-storing parts, dissipative parts, and external sources. On the other hand, a numerical scheme is especially designed to preserve this structure and the power balance. These state-space structures define the class of port-Hamiltonian systems. The derivation of this structured system associated with the electronic circuit is achieved by an automated analysis of the interconnection network combined with a dictionary of models for each elementary component. The numerical scheme is based on the combination of finite differences applied on the state (with respect to the time variable and on the total energy (with respect to the state. This combination provides a discrete-time version of the power balance. This set of algorithms is valid for both the linear and nonlinear case. Finally, three applications of increasing complexities are given: a diode clipper, a common-emitter bipolar-junction transistor amplifier, and a wah pedal. The results are compared to offline simulations obtained from a popular circuit simulator.

Electrophoretic deposition of Cu2ZnSn(S0.5Se0.5)4 films using solvothermal synthesized nanoparticles

Science.gov (United States)

Badkoobehhezaveh, Amir Masoud; Abdizadeh, Hossein; Golobostanfard, Mohammad Reza

2018-01-01

In this paper, a simple, practical, and fast solvothermal route is presented for synthesizing the Cu2ZnSn(S0.5Se0.5)4 nanoparticles (CZTSSe). In this method, the precursors were dissolved in triethylenetetramine and placed in an autoclave at 240 °C for 1 h under controlled pressure and constant stirring. After washing the samples for several times with absolute ethanol, the obtained CZTSSe nanoparticles were successfully deposited on fluorine doped tin oxide substrates by convenient electrophoretic deposition (EPD) using colloidal nanoparticles. The most appropriate parameters for EPD of pre-synthesized CZTSSe nanoparticles which result in proper surface properties, controlled thickness, and high film quality are investigated by adjusting applied voltage, pH, and deposition time. X-ray diffraction pattern and Raman spectroscopy of the pre-synthesized nanoparticles show kesterite structure formation. The particle size of the CZTSSe nanoparticles is in the range of 100 to 400 nm and for some agglomerates, it is about 2 µm confirmed by scanning electron microscope. The deposited film with optimized parameter has acceptable quality without any crack in it with the thickness of about 4-5 µm. Energy-dispersive X-ray spectroscopy confirms that the chemical composition of the samples is in near stoichiometric Cu-poor and Zn-rich region, which guarantees the p-type character of the film. The diffuse reflectance spectroscopy also demonstrates that the optical band gap of the sample is about 1.2 eV.

7 CFR 1810.1 - Information concerning interest rates, amortization, guarantee fee, annual charge, and fixed period.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Information concerning interest rates, amortization... UTILITIES SERVICE, AND FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS INTEREST RATES, TERMS, CONDITIONS, AND APPROVAL AUTHORITY Interest Rates, Amortization, Guarantee Fee, Annual Charge...

ELLIPSOMETRIC STUDY OF SEMITRANSPARENT SILVER LAYERS DEPOSITED ON GLASS

Directory of Open Access Journals (Sweden)

Víctor Toranzos

2014-12-01

Full Text Available Using ellipsometry, the film structure is characterized by optical indices n, k (visible region, 450 nm <  < 580 nm and the thickness (15 < d < 35 nm. The optical indices change with the quantity of silver deposited, obtaining effective indices of 1.0 < n < 1.8 and 1.6 < k < 2.6 to the smaller deposits that belong to a volumetric fraction between 0.35 and 0.5 of silver in the air. An effective optical thickness film decrease is observed when the silver volumetric fraction increases, and a thickness increase with close indices to solid silver when the deposited silver increases. Optical and effective medium theory indices are compared.

Influence of solution deposition rate on properties of V_2O_5 thin films deposited by spray pyrolysis technique

International Nuclear Information System (INIS)

Abd–Alghafour, N. M.; Ahmed, Naser M.; Hassan, Zai; Mohammad, Sabah M.

2016-01-01

Vanadium oxide (V_2O_5) thin films were deposited on glass substrates by using a cost-efficient spray pyrolysis technique. The films were grown at 350° through thermal decomposition of VCl_3 in deionized water with different solution spray rates. The high resolution X-ray diffraction results revealed the formation of nanocrystalline films having orthorhombic structures with preferential orientation along (101) direction. The spray rate influenced the surface morphology and crystallite size of the films. The crystallite size was found to increase whereas the micro-strain was decreased by increasing the spray deposition rates. The increase in crystallite size and decrease in the macrostrain resulted in an improvement in the films’ crystallinity. The UV-Visible spectroscopy analysis indicated that the average transmittance of all films lies in the range 75-80 %. The band gap of V_2O_5 film was decreased from 2.65 to 2.46 eV with increase of the spray deposition rate from 5 ml/min to 10 ml/min. first, second, and third level headings (first level heading).

A simple method to deposit palladium doped SnO2 thin films using plasma enhanced chemical vapor deposition technique

International Nuclear Information System (INIS)

Kim, Young Soon; Wahab, Rizwan; Shin, Hyung-Shik; Ansari, S. G.; Ansari, Z. A.

2010-01-01

This work presents a simple method to deposit palladium doped tin oxide (SnO 2 ) thin films using modified plasma enhanced chemical vapor deposition as a function of deposition temperature at a radio frequency plasma power of 150 W. Stannic chloride (SnCl 4 ) was used as precursor and oxygen (O 2 , 100 SCCM) (SCCM denotes cubic centimeter per minute at STP) as reactant gas. Palladium hexafluroacetyleacetonate (Pd(C 5 HF 6 O 2 ) 2 ) was used as a precursor for palladium. Fine granular morphology was observed with tetragonal rutile structure. A peak related to Pd 2 Sn is observed, whose intensity increases slightly with deposition temperature. Electrical resistivity value decreased from 8.6 to 0.9 mΩ cm as a function of deposition temperature from 400 to 600 deg. C. Photoelectron peaks related to Sn 3d, Sn 3p3, Sn 4d, O 1s, and C 1s were detected with varying intensities as a function of deposition temperature.

ROLE OF DEPOSIT POLICY FOR UKRAINIAN BANKING INSTITUTIONS

Directory of Open Access Journals (Sweden)

Nadezhda Bova

2015-11-01

Full Text Available The purpose of the paper is to define and demonstrate the role of deposit policy for banking institutions, summarize and highlight the problems and its solutions in deposit policy of Ukraine that provides economic downturn and recovery. Appropriate selection and implementation of the deposit policy objectives, its operational structure and tools determines the degree of development of financial inclusion, which generate developed financial market, ensures public confidence to the deposit services, and increases the level of savings that positively affects the banking system financial stability and economy in the country in whole. It is because of availability and security deposit services, commercial banks of Ukraine have the opportunity to increase its resource base due to savings of the population. Methodology. The paper is based on a synthesis of data to explore the bank deposit policy situation. The paper considers the scientific and theoretical approaches for the developing the deposit policy management. It contains the analysis of the dynamics and current situation and conditions of the resource potential of banking institutions in Ukraine. Results of the article shows direct dependency between savings, consumption and deposit policy, therefore every banking institution includes the mechanism of banking management of the development and implementation of deposit policy. Also, this management defines the deposit policy directions according to the conditions of bank resources mobilization and its applying in active operations. The obtained results confirm that the term “deposit policy” is too complex, but it is investigated in interaction with banking activity. It is explained how deposit policy influences banking system and has impact on economic growth in general. Practical implications. The research creates methodological approaches to the measurement of effectiveness of deposit policy. Also, it studies the existing ones. It provides

20 CFR 703.207 - Kinds of negotiable securities that may be deposited; conditions of deposit; acceptance of deposits.

Science.gov (United States)

2010-04-01

... amount fixed by the Office under the regulations in this part shall deposit any negotiable securities... deposited; conditions of deposit; acceptance of deposits. 703.207 Section 703.207 Employees' Benefits... AND RELATED STATUTES INSURANCE REGULATIONS Insurance Carrier Security Deposit Requirements § 703.207...

The impact of nitrogen deposition on acid grasslands in the Atlantic region of Europe

Energy Technology Data Exchange (ETDEWEB)

Stevens, Carly J., E-mail: c.j.stevens@open.ac.uk [Department of Life Sciences, The Open University, Walton Hall, Milton Keynes MK7 6AA (United Kingdom); Lancaster Environment Centre, Lancaster University, Lancaster LA1 4YQ (United Kingdom); Dupre, Cecilia [Institute of Ecology, FB 2, University of Bremen, Leobener Str., DE-28359 Bremen (Germany); Dorland, Edu [Ecology and Biodiversity Group, Department of Biology, Institute of Environmental Biology, Utrecht University, PO Box 80.058, 3508 TB Utrecht (Netherlands); Gaudnik, Cassandre [University of Bordeaux 1, UMR INRA 1202 Biodiversity, Genes and Communities, Equipe Ecologie des Communautes, Batiment B8 - Avenue des Facultes, F-33405 Talence (France); Gowing, David J.G. [Department of Life Sciences, The Open University, Walton Hall, Milton Keynes MK7 6AA (United Kingdom); Bleeker, Albert [Department of Air Quality and Climate Change, Energy Research Centre of the Netherlands, PO Box 1, 1755 ZG Petten (Netherlands); Diekmann, Martin [Institute of Ecology, FB 2, University of Bremen, Leobener Str., DE-28359 Bremen (Germany); Alard, Didier [University of Bordeaux 1, UMR INRA 1202 Biodiversity, Genes and Communities, Equipe Ecologie des Communautes, Batiment B8 - Avenue des Facultes, F-33405 Talence (France); Bobbink, Roland [B-WARE Research Centre, Radboud University, PO Box 9010, 6525 ED Nijmegen (Netherlands); Fowler, David [NERC Centre for Ecology and Hydrology, Bush Estate, Penicuik, Midlothian EH26 0QB (United Kingdom); Corcket, Emmanuel [University of Bordeaux 1, UMR INRA 1202 Biodiversity, Genes and Communities, Equipe Ecologie des Communautes, Batiment B8 - Avenue des Facultes, F-33405 Talence (France); Mountford, J. Owen [NERC Centre for Ecology and Hydrology, MacLean Building, Benson Lane, Crowmarsh Gifford, Wallingford, Oxfordshire OX10 8BB (United Kingdom); Vandvik, Vigdis [Department of Biology, University of Bergen, Box 7800, N-5020 Bergen (Norway)

2011-10-15

A survey of 153 acid grasslands from the Atlantic biogeographic region of Europe indicates that chronic nitrogen deposition is changing plant species composition and soil and plant-tissue chemistry. Across the deposition gradient (2-44 kg N ha{sup -1} yr{sup -1}) grass richness as a proportion of total species richness increased whereas forb richness decreased. Soil C:N ratio increased, but soil extractable nitrate and ammonium concentrations did not show any relationship with nitrogen deposition. The above-ground tissue nitrogen contents of three plant species were examined: Agrostis capillaris (grass), Galium saxatile (forb) and Rhytidiadelphus squarrosus (bryophyte). The tissue nitrogen content of neither vascular plant species showed any relationship with nitrogen deposition, but there was a weak positive relationship between R. squarrosus nitrogen content and nitrogen deposition. None of the species showed strong relationships between above-ground tissue N:P or C:N and nitrogen deposition, indicating that they are not good indicators of deposition rate. - Highlights: > N deposition is negatively correlated with forb richness as a proportion of species richness. > Soil C:N ratio increased with increasing N deposition. > Soil extractable nitrate and ammonium were not related to nitrogen deposition. > Plant-tissue N content was not a good indicator of N deposition. - Atmospheric nitrogen deposition affects soils, plant-tissue chemistry and plant species composition in acid grasslands in the Atlantic biogeographic region of Europe.

The impact of nitrogen deposition on acid grasslands in the Atlantic region of Europe

International Nuclear Information System (INIS)

Stevens, Carly J.; Dupre, Cecilia; Dorland, Edu; Gaudnik, Cassandre; Gowing, David J.G.; Bleeker, Albert; Diekmann, Martin; Alard, Didier; Bobbink, Roland; Fowler, David; Corcket, Emmanuel; Mountford, J. Owen; Vandvik, Vigdis

2011-01-01

A survey of 153 acid grasslands from the Atlantic biogeographic region of Europe indicates that chronic nitrogen deposition is changing plant species composition and soil and plant-tissue chemistry. Across the deposition gradient (2-44 kg N ha -1 yr -1 ) grass richness as a proportion of total species richness increased whereas forb richness decreased. Soil C:N ratio increased, but soil extractable nitrate and ammonium concentrations did not show any relationship with nitrogen deposition. The above-ground tissue nitrogen contents of three plant species were examined: Agrostis capillaris (grass), Galium saxatile (forb) and Rhytidiadelphus squarrosus (bryophyte). The tissue nitrogen content of neither vascular plant species showed any relationship with nitrogen deposition, but there was a weak positive relationship between R. squarrosus nitrogen content and nitrogen deposition. None of the species showed strong relationships between above-ground tissue N:P or C:N and nitrogen deposition, indicating that they are not good indicators of deposition rate. - Highlights: → N deposition is negatively correlated with forb richness as a proportion of species richness. → Soil C:N ratio increased with increasing N deposition. → Soil extractable nitrate and ammonium were not related to nitrogen deposition. → Plant-tissue N content was not a good indicator of N deposition. - Atmospheric nitrogen deposition affects soils, plant-tissue chemistry and plant species composition in acid grasslands in the Atlantic biogeographic region of Europe.

75 FR 65615 - Conditional Commitment for a Federal Loan Guarantee for Project Financing for Southwest Intertie...

Science.gov (United States)

2010-10-26

... DEPARTMENT OF ENERGY Conditional Commitment for a Federal Loan Guarantee for Project Financing for... based on the analysis in the Final Environmental Impact Statement for Project Financing for Southwest... support of debt financing for transmission infrastructure investment projects located in the United States...

Increasing the deposition rate of microcrystalline and amorphous silicon thin films for photovoltaic applications - Phase IV: 1997-1999

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

This report on behalf of the Swiss Federal Office of Energy (SFOE) describes Phase IV of the project to test the feasibility and usefulness of Very High Frequency (VHF) plasma operation in large-area reactors suitable for the production of solar cell panels using thinly-deposited micro-crystalline silicon films. The report discusses the results of fast-deposition tests and trials using high-current DC arcs and VHF techniques to obtain deposition rates and film quality suitable for industrial processes for the production of thin-film solar cell panels. The effects of alternative plasma chemistry were also studied by adding silicon tetrafluoride to the standard silane/hydrogen mixtures. The report is concluded with calculations for optimum radio-frequency (RF) contact configuration for large area reactors with 1 m{sup 2} electrodes.

Imbalanced phosphorus and nitrogen deposition in China's forests

NARCIS (Netherlands)

Du, Enzai; Vries, de Wim; Han, Wenxuan; Liu, Xuejun; Yan, Zhengbing; Jiang, Yuan

2016-01-01

Acceleration of anthropogenic emissions in China has substantially increased nitrogen (N) deposition during the last 3 decades and may result in an imbalance of atmospheric N and phosphorus (P) inputs in terrestrial ecosystems. However, the status of P deposition in China is poorly understood.

Ancillary effects of selected acid deposition control policies

Energy Technology Data Exchange (ETDEWEB)

Moe, R.J.; Lyke, A.J.; Nesse, R.J.

1986-08-01

NAPAP is examining a number of potential ways to reduce the precursors (sulfur dioxide and nitrogen oxides) to acid deposition. However, the policies to reduce acid deposition will have other physical, biological and economic effects unrelated to acid deposition. For example, control policies that reduce sulfur dioxide emissions may also increase visibility. The effects of an acid deposition policy that are unrelated to acid deposition are referred to as ''ancillary'' effects. This reserch identifies and characterizes the principle physical and economic ancillary effects associated with acid deposition control and mitigation policies. In this study the ancillary benefits associated with four specific acid deposition policy options were investigated. The four policy options investigated are: (1) flue gas desulfurization, (2) coal blending or switching, (3) reductions in automobile emissions of NO/sub x/, and (4) lake liming. Potential ancillary benefits of each option were identified and characterized. Particular attention was paid to the literature on economic valuation of potential ancillary effects.

Improvement in the electronic quality of pulsed laser deposited CuIn{sub 0.7}Ga{sub 0.3}Se{sub 2} thin films via post-deposition elemental sulfur annealing process

Energy Technology Data Exchange (ETDEWEB)

Beres, M., E-mail: matthewcberes@gmail.com [University of California, Department of Mechanical Engineering, 6141 Etcheverry Hall, Berkeley, CA 94720 (United States); Lawrence Berkeley National Laboratory, 1 Cyclotron Rd, Berkeley, CA 94720 (United States); Yu, K.M., E-mail: kinmanyu@cityu.edu.hk [Lawrence Berkeley National Laboratory, 1 Cyclotron Rd, Berkeley, CA 94720 (United States); City University of Hong Kong, Department of Physics and Materials Science, 83 Tat Chee Avenue, Kowloon, Hong Kong Special Administrative Region (Hong Kong); Syzdek, J., E-mail: jego.mejl@gmail.com [Lawrence Berkeley National Laboratory, 1 Cyclotron Rd, Berkeley, CA 94720 (United States); Bio-Logic USA, 9050 Executive Park Dr NW, Knoxville, TN 37923 (United States); Mao, S.S., E-mail: ssmao@me.berkeley.edu [University of California, Department of Mechanical Engineering, 6141 Etcheverry Hall, Berkeley, CA 94720 (United States); Lawrence Berkeley National Laboratory, 1 Cyclotron Rd, Berkeley, CA 94720 (United States)

2016-06-01

We synthesized CuIn{sub 0.7}Ga{sub 0.3}Se{sub 2} thin films on soda lime glass substrates using pulsed laser deposition and post-annealing under different conditions. Increasing substrate temperature during deposition and vacuum annealing after deposition both increased grain size but had negligible effect on the electronic properties of the films. As-deposited films demonstrated P-type conductivities with high carrier concentrations and low Hall mobilities, but annealing in elemental sulfur environment significantly improved the electronic properties of the films. We found that the incorporation of even small quantities of sulfur into the films reduced carrier concentrations by over three orders of magnitude and increased Hall mobilities by an order of magnitude. This resulted in films with resistivity ~ 5 Ω·cm suitable for photovoltaic applications. - Highlights: • CIGSe thin films were deposited by pulsed laser deposition. • Laser deposition parameters and annealing parameters were investigated. • As-deposited films demonstrated high hole concentrations and low Hall mobilities. • Elemental sulfur annealing significantly enhanced the electronic quality of films.

Sub-aerial tailings deposition

International Nuclear Information System (INIS)

Knight, R.B.; Haile, J.P.

1984-01-01

The sub-aerial technique involves the systematic deposition of tailings in thin layers and allowing each layer to settle, drain and partially air dry prior to covering with a further layer. Underdrainage produces densities in excess of those achieved by sub-aqueous deposition and any air-drying serves to preconsolidate each layer with a resulting further increase in density. The low permeability of the tailings surface resulting from this deposition technique results in high runoff coefficients and, by decanting the runoff component of direct precipitation, a net evaporation condition can be achieved even in high rainfall areas. An underdrainage system prevents the build-up of excess pore-pressures within the tailings mass and at decommissioning the tailings are fully consolidated and drained thereby eliminating the possibility of any long term seepage. This paper presents a general description of these design concepts, and details of two projects where the concepts have been applied

Influence of Gas Flow Rate on the Deposition Rate on Stainless Steel 202 Substrates

Directory of Open Access Journals (Sweden)

M.A. Chowdhury

2012-12-01

Full Text Available Solid thin films have been deposited on stainless steel 202 (SS 202 substrates at different flow rates of natural gas using a hot filament thermal chemical vapor deposition (CVD reactor. In the experiments, the variations of thin film deposition rate with the variation of gas flow rate have been investigated. The effects of gap between activation heater and substrate on the deposition rate have also been observed. Results show that deposition rate on SS 202 increases with the increase in gas flow rate within the observed range. It is also found that deposition rate increases with the decrease in gap between activation heater and substrate. In addition, friction coefficient and wear rate of SS 202 sliding against SS 304 under different sliding velocities are also investigated before and after deposition. The experimental results reveal that improved friction coefficient and wear rate is obtained after deposition than that of before deposition.

Defect studies of thin ZnO films prepared by pulsed laser deposition

International Nuclear Information System (INIS)

Vlček, M; Čížek, J; Procházka, I; Novotný, M; Bulíř, J; Lančok, J; Anwand, W; Brauer, G; Mosnier, J-P

2014-01-01

Thin ZnO films were grown by pulsed laser deposition on four different substrates: sapphire (0 0 0 1), MgO (1 0 0), fused silica and nanocrystalline synthetic diamond. Defect studies by slow positron implantation spectroscopy (SPIS) revealed significantly higher concentration of defects in the studied films when compared to a bulk ZnO single crystal. The concentration of defects in the films deposited on single crystal sapphire and MgO substrates is higher than in the films deposited on amorphous fused silica substrate and nanocrystalline synthetic diamond. Furthermore, the effect of deposition temperature on film quality was investigated in ZnO films deposited on synthetic diamond substrates. Defect studies performed by SPIS revealed that the concentration of defects firstly decreases with increasing deposition temperature, but at too high deposition temperatures it increases again. The lowest concentration of defects was found in the film deposited at 450° C.

Physical Vapor Deposition of Thin Films

Science.gov (United States)

Mahan, John E.

2000-01-01

A unified treatment of the theories, data, and technologies underlying physical vapor deposition methods With electronic, optical, and magnetic coating technologies increasingly dominating manufacturing in the high-tech industries, there is a growing need for expertise in physical vapor deposition of thin films. This important new work provides researchers and engineers in this field with the information they need to tackle thin film processes in the real world. Presenting a cohesive, thoroughly developed treatment of both fundamental and applied topics, Physical Vapor Deposition of Thin Films incorporates many critical results from across the literature as it imparts a working knowledge of a variety of present-day techniques. Numerous worked examples, extensive references, and more than 100 illustrations and photographs accompany coverage of: * Thermal evaporation, sputtering, and pulsed laser deposition techniques * Key theories and phenomena, including the kinetic theory of gases, adsorption and condensation, high-vacuum pumping dynamics, and sputtering discharges * Trends in sputter yield data and a new simplified collisional model of sputter yield for pure element targets * Quantitative models for film deposition rate, thickness profiles, and thermalization of the sputtered beam

48 CFR 1812.7000 - Prohibition on guaranteed customer bases for new commercial space hardware or services.

Science.gov (United States)

2010-10-01

... customer bases for new commercial space hardware or services. 1812.7000 Section 1812.7000 Federal... PLANNING ACQUISITION OF COMMERCIAL ITEMS Commercial Space Hardware or Services 1812.7000 Prohibition on guaranteed customer bases for new commercial space hardware or services. Public Law 102-139, title III...

TECHNOLOGICAL ADVANCEMENT OF DEPOSIT WELDING AND GAS LASER CUTTING TO INCREASE THE EFFICIENCY OF THE BIMETALLIC TOOL PRODUCTION

Directory of Open Access Journals (Sweden)

Burlachenko Oleg Vasil’evich

2017-08-01

Full Text Available Deposit welding is the application of a layer of metal on the surface of a product using fusion welding. In this paper, we consider the method of improving the technology of gas laser cutting, which makes it possible to achieve a high productivity of manufacturing a bimetallic tool. The present paper is concerned with the advantages of gas laser cutting which allows to consider this particular process of separating materials as highly-productive, low-waste, and advanced method of removing allowances of weld-deposit high-speed steel on the working surfaces of bimetallic tool. Urgency of the use of deposit welding and gas laser cutting to improve the efficiency of production of bimetallic tool is shown. The comparative analysis of gas-laser cutting and other cutting methods is given according to the geometrical parameters of cutting and surface quality. Analysis of the results of experimental studies has confirmed the high technological attractiveness and economic efficiency of manufacturing composite structures of punches and matrices when applying deposit welding of cutting parts with high-speed steels. The cost of dimensional processing of the welded cutting part is reduced by 4 to 6 times, while the manufacturing time is reduced by 6 to 12 times.

A Mirage or a Rural Life Line? Analysing the impact of Mahatma Gandhi Rural Employment Guarantee Act on Women Beneficiaries of Assam

Directory of Open Access Journals (Sweden)

Rituparna Bhattacharyya

2013-05-01

Full Text Available The National Rural Employment Guarantee Act (NREGA, launched in February 2006 was renamed in October 02, 2009 as the Mahatma Gandhi National Rural Employment Guarantee Act (henceforth, MGNREGA. It is an anti-poverty flagship programme of the Government of India. The key purpose of MGNREGA is to enhance wage employment in the rural areas by providing at least 100 days of guaranteed employment to every household in a financial year.  The MGNREGA implementation status report for the financial year 2012-2013 unfolds that the programme has already provided employment to 44.9 million households across 28 districts and five union territories. Hence, it is becoming increasingly difficult to ignore the impact of MGNREGA on women beneficiaries. A plethora of research argues that MGNREGA, which promotes inclusive growth, is a vehicle of change, a lifeline for rural women. So far, however, there has been very little discussion about the impact of MGNREGA on women beneficiaries of Assam. This research is an attempt to examine the participation of women in MGNREGA, Assam. It critically looks at the issues, problems and challenges confronted by the women while working at MGNREGA. Written from a feminist perspective on gender, poverty and women’s empowerment, the research seeks to address the problems of the women beneficiaries through their lived experiences. For this, we conducted in-depth interviews with the women beneficiaries in the months of August and September, 2009 in four remote areas namely, Burka, Chandrapur, Barbhang and Muguriya, the first two situated in Kamrup, while the third and the fourth in Barpeta districts of Assam, where the programme of MGNREGA is on-going. The findings of the research suggest measures so that the programme can be made more effective in the long run.

High Temperature Multilayer Environmental Barrier Coatings Deposited Via Plasma Spray-Physical Vapor Deposition

Science.gov (United States)

Harder, Bryan James; Zhu, Dongming; Schmitt, Michael P.; Wolfe, Douglas E.

2014-01-01

Si-based ceramic matrix composites (CMCs) require environmental barrier coatings (EBCs) in combustion environments to avoid rapid material loss. Candidate EBC materials have use temperatures only marginally above current technology, but the addition of a columnar oxide topcoat can substantially increase the durability. Plasma Spray-Physical Vapor Deposition (PS-PVD) allows application of these multilayer EBCs in a single process. The PS-PVD technique is a unique method that combines conventional thermal spray and vapor phase methods, allowing for tailoring of thin, dense layers or columnar microstructures by varying deposition conditions. Multilayer coatings were deposited on CMC specimens and assessed for durability under high heat flux and load. Coated samples with surface temperatures ranging from 2400-2700F and 10 ksi loads using the high heat flux laser rigs at NASA Glenn. Coating morphology was characterized in the as-sprayed condition and after thermomechanical loading using electron microscopy and the phase structure was tracked using X-ray diffraction.

CdS films deposited by chemical bath under rotation

International Nuclear Information System (INIS)

Oliva-Aviles, A.I.; Patino, R.; Oliva, A.I.

2010-01-01

Cadmium sulfide (CdS) films were deposited on rotating substrates by the chemical bath technique. The effects of the rotation speed on the morphological, optical, and structural properties of the films were discussed. A rotating substrate-holder was fabricated such that substrates can be taken out from the bath during the deposition. CdS films were deposited at different deposition times (10, 20, 30, 40 and 50 min) onto Corning glass substrates at different rotation velocities (150, 300, 450, and 600 rpm) during chemical deposition. The chemical bath was composed by CdCl 2 , KOH, NH 4 NO 3 and CS(NH 2 ) 2 as chemical reagents and heated at 75 deg. C. The results show no critical effects on the band gap energy and the surface roughness of the CdS films when the rotation speed changes. However, a linear increase on the deposition rate with the rotation energy was observed, meanwhile the stoichiometry was strongly affected by the rotation speed, resulting a better 1:1 Cd/S ratio as speed increases. Rotation effects may be of interest in industrial production of CdTe/CdS solar cells.

CdS films deposited by chemical bath under rotation

Energy Technology Data Exchange (ETDEWEB)

Oliva-Aviles, A.I., E-mail: aoliva@mda.cinvestav.mx [Centro de Investigacion y de Estudios Avanzados Unidad Merida, Departamento de Fisica Aplicada. A.P. 73-Cordemex, 97310 Merida, Yucatan (Mexico); Patino, R.; Oliva, A.I. [Centro de Investigacion y de Estudios Avanzados Unidad Merida, Departamento de Fisica Aplicada. A.P. 73-Cordemex, 97310 Merida, Yucatan (Mexico)

2010-08-01

Cadmium sulfide (CdS) films were deposited on rotating substrates by the chemical bath technique. The effects of the rotation speed on the morphological, optical, and structural properties of the films were discussed. A rotating substrate-holder was fabricated such that substrates can be taken out from the bath during the deposition. CdS films were deposited at different deposition times (10, 20, 30, 40 and 50 min) onto Corning glass substrates at different rotation velocities (150, 300, 450, and 600 rpm) during chemical deposition. The chemical bath was composed by CdCl{sub 2}, KOH, NH{sub 4}NO{sub 3} and CS(NH{sub 2}){sub 2} as chemical reagents and heated at 75 deg. C. The results show no critical effects on the band gap energy and the surface roughness of the CdS films when the rotation speed changes. However, a linear increase on the deposition rate with the rotation energy was observed, meanwhile the stoichiometry was strongly affected by the rotation speed, resulting a better 1:1 Cd/S ratio as speed increases. Rotation effects may be of interest in industrial production of CdTe/CdS solar cells.

Defect control in room temperature deposited cadmium sulfide thin films by pulsed laser deposition

International Nuclear Information System (INIS)

Hernandez-Como, N.; Martinez-Landeros, V.; Mejia, I.; Aguirre-Tostado, F.S.; Nascimento, C.D.; Azevedo, G. de M; Krug, C.; Quevedo-Lopez, M.A.

2014-01-01

The control of defects in cadmium sulfide thin films and its impact on the resulting CdS optical and electrical characteristics are studied. Sulfur vacancies and cadmium interstitial concentrations in the CdS films are controlled using the ambient pressure during pulsed laser deposition. CdS film resistivities ranging from 10 −1 to 10 4 Ω-cm are achieved. Hall Effect measurements show that the carrier concentration ranges from 10 19 to 10 13 cm −3 and is responsible for the observed resistivity variation. Hall mobility varies from 2 to 12 cm 2 /V-s for the same pressure regime. Although the energy bandgap remains unaffected (∼ 2.42 eV), the optical transmittance is reduced due to the increase of defects in the CdS films. Rutherford back scattering spectroscopy shows the dependence of the CdS films stoichiometry with deposition pressure. The presence of CdS defects is attributed to more energetic species reaching the substrate, inducing surface damage in the CdS films during pulsed laser deposition. - Highlights: • CdS thin films deposited by pulsed laser deposition at room temperature. • The optical, electrical and structural properties were evaluated. • Carrier concentration ranged from 10 19 to 10 13 cm −3 . • The chemical composition was studied by Rutherford back scattering. • The density of sulfur vacancies and cadmium interstitial was varied

Delay-Dependent Guaranteed Cost H∞ Control of an Interval System with Interval Time-Varying Delay

Directory of Open Access Journals (Sweden)

Zhongke Shi

2009-01-01

Full Text Available This paper concerns the problem of the delay-dependent robust stability and guaranteed cost H∞ control for an interval system with time-varying delay. The interval system with matrix factorization is provided and leads to less conservative conclusions than solving a square root. The time-varying delay is assumed to belong to an interval and the derivative of the interval time-varying delay is not a restriction, which allows a fast time-varying delay; also its applicability is broad. Based on the Lyapunov-Ktasovskii approach, a delay-dependent criterion for the existence of a state feedback controller, which guarantees the closed-loop system stability, the upper bound of cost function, and disturbance attenuation lever for all admissible uncertainties as well as out perturbation, is proposed in terms of linear matrix inequalities (LMIs. The criterion is derived by free weighting matrices that can reduce the conservatism. The effectiveness has been verified in a number example and the compute results are presented to validate the proposed design method.

Global Environmental Governance as a Regulatory and Guarantee Criterion for Environmental Justice

Directory of Open Access Journals (Sweden)

Denise Schmitt Siqueira Garcia

2016-12-01

Full Text Available This article deals with the theme of Global Environmental Governance to the achievement of Environmental Justice, presenting as general objective to analyze the importance of the first in its public, business and civil society spheres for the regulation and guarantee of the second. Noting up at the end that the Environmental Justice, as a common humanitarian problem, presents itself as the main objective of Global Environmental Governance. In the methodology was adopted the inductive method, having been applied the techniques of the referent, category, operational concepts, bibliographical research and file.

Ellipsometric study of nanostructured carbon films deposited by pulsed laser deposition

International Nuclear Information System (INIS)

Bereznai, M.; Budai, J.; Hanyecz, I.; Kopniczky, J.; Veres, M.; Koos, M.; Toth, Z.

2011-01-01

When depositing carbon films by plasma processes the resulting structure and bonding nature strongly depends on the plasma energy and background gas pressure. To produce different energy plasma, glassy carbon targets were ablated by laser pulses of different excimer lasers: KrF (248 nm) and ArF (193 nm). To modify plume characteristics argon atmosphere was applied. The laser plume was directed onto Si substrates, where the films were grown. To evaluate ellipsometric measurements first a combination of the Tauc-Lorentz oscillator and the Sellmeier formula (TL/S) was applied. Effective Medium Approximation models were also used to investigate film properties. Applying argon pressures above 10 Pa the deposits became nanostructured as indicated by high resolution scanning electron microscopy. Above ∼ 100 and ∼ 20 Pa films could not be deposited by KrF and ArF laser, respectively. Our ellipsometric investigations showed, that with increasing pressure the maximal refractive index of both series decreased, while the optical band gap starts with a decrease, but shows a non monotonous course. Correlation between the size of the nanostructures, bonding structure, which was followed by Raman spectroscopy and optical properties were also investigated.

77 FR 21793 - Notice of Proposed Information Collection for Public Comment; Loan Guarantee for Indian Housing

Science.gov (United States)

2012-04-11

... Number: 2577-0200. Description of the need for the information and proposed use: The information is... service areas. Mortgage lenders approved by HUD provide borrower and lender information to HUD for... Information Collection for Public Comment; Loan Guarantee for Indian Housing AGENCY: Office of the Assistant...

Photosynthetic performance in Sphagnum transplanted along a latitudinal nitrogen deposition gradient

NARCIS (Netherlands)

Granath, G.; Strengbom, J.; Breeuwer, A.J.G.; Heijmans, M.M.P.D.; Berendse, F.; Rydin, H.

2009-01-01

Increased N deposition in Europe has affected mire ecosystems. However, knowledge on the physiological responses is poor. We measured photosynthetic responses to increasing N deposition in two peatmoss species (Sphagnum balticum and Sphagnum fuscum) from a 3-year, north-south transplant experiment

Multi-model study of HTAP II on sulfur and nitrogen deposition

Science.gov (United States)

Tan, Jiani; Fu, Joshua S.; Dentener, Frank; Sun, Jian; Emmons, Louisa; Tilmes, Simone; Sudo, Kengo; Flemming, Johannes; Eiof Jonson, Jan; Gravel, Sylvie; Bian, Huisheng; Davila, Yanko; Henze, Daven K.; Lund, Marianne T.; Kucsera, Tom; Takemura, Toshihiko; Keating, Terry

2018-05-01

This study uses multi-model ensemble results of 11 models from the second phase of Task Force Hemispheric Transport of Air Pollution (HTAP II) to calculate the global sulfur (S) and nitrogen (N) deposition in 2010. Modeled wet deposition is evaluated with observation networks in North America, Europe and East Asia. The modeled results agree well with observations, with 76-83 % of stations being predicted within ±50 % of observations. The models underestimate SO42-, NO3- and NH4+ wet depositions in some European and East Asian stations but overestimate NO3- wet deposition in the eastern United States. Intercomparison with previous projects (PhotoComp, ACCMIP and HTAP I) shows that HTPA II has considerably improved the estimation of deposition at European and East Asian stations. Modeled dry deposition is generally higher than the inferential data calculated by observed concentration and modeled velocity in North America, but the inferential data have high uncertainty, too. The global S deposition is 84 Tg(S) in 2010, with 49 % in continental regions and 51 % in the ocean (19 % of which coastal). The global N deposition consists of 59 Tg(N) oxidized nitrogen (NOy) deposition and 64 Tg(N) reduced nitrogen (NHx) deposition in 2010. About 65 % of N is deposited in continental regions, and 35 % in the ocean (15 % of which coastal). The estimated outflow of pollution from land to ocean is about 4 Tg(S) for S deposition and 18 Tg(N) for N deposition. Comparing our results to the results in 2001 from HTAP I, we find that the global distributions of S and N deposition have changed considerably during the last 10 years. The global S deposition decreases 2 Tg(S) (3 %) from 2001 to 2010, with significant decreases in Europe (5 Tg(S) and 55 %), North America (3 Tg(S) and 29 %) and Russia (2 Tg(S) and 26 %), and increases in South Asia (2 Tg(S) and 42 %) and the Middle East (1 Tg(S) and 44 %). The global N deposition increases by 7 Tg(N) (6 %), mainly contributed by South Asia

Convergence Guaranteed Nonlinear Constraint Model Predictive Control via I/O Linearization

Directory of Open Access Journals (Sweden)

Xiaobing Kong

2013-01-01

Full Text Available Constituting reliable optimal solution is a key issue for the nonlinear constrained model predictive control. Input-output feedback linearization is a popular method in nonlinear control. By using an input-output feedback linearizing controller, the original linear input constraints will change to nonlinear constraints and sometimes the constraints are state dependent. This paper presents an iterative quadratic program (IQP routine on the continuous-time system. To guarantee its convergence, another iterative approach is incorporated. The proposed algorithm can reach a feasible solution over the entire prediction horizon. Simulation results on both a numerical example and the continuous stirred tank reactors (CSTR demonstrate the effectiveness of the proposed method.

National Rural Employment Guarantee Scheme, poverty and prices in rural India.

Science.gov (United States)

Gaiha, Raghav; Kulkarni, Vani S; Pandey, Manoj K; Imai, Katsushi S

2010-01-01

The objective of this analysis is mainly to construct an intuitive measure of the performance of the National Rural Employment Guarantee Scheme (NREGS) in India. The focus is on divergence between demand and supply at the district level. Some related issues addressed are: (i) whether the gap between demand and supply responds to poverty; and (ii) whether recent hikes in NREGS wages are inflationary. Our analysis confirms responsiveness of the positive gap between demand and supply to poverty. Also, apprehensions expressed about the inflationary potential of recent hikes in NREGS wages have been confirmed. More importantly, higher NREGS wages are likely to undermine self-selection of the poor in it.

Quality Guarantee in the services that the LSCD of Guatemala lends

International Nuclear Information System (INIS)

Dieguez Davila, L.

1998-01-01

It is of supreme importance that the instruments used in the radiological protection, as well as those used in clinical dosimetry, maintain trazability to primary patterns; this way it is guaranteed that the used magnitudes are reproducible in the secondary laboratories. This premise is important, however, it is indispensable that the laboratories can establish the necessary procedures in writing to make the mensurations that are involved in the calibrations and the other services characteristic of a secondary laboratory. The present work demonstrates as all the lent services in the secondary laboratory of dosimetric calibration of Guatemala are carried out by means of the procedures of quality demanded at international level

Atomic-Layer-Deposition of Indium Oxide Nano-films for Thin-Film Transistors.

Science.gov (United States)

Ma, Qian; Zheng, He-Mei; Shao, Yan; Zhu, Bao; Liu, Wen-Jun; Ding, Shi-Jin; Zhang, David Wei

2018-01-09

Atomic-layer-deposition (ALD) of In 2 O 3 nano-films has been investigated using cyclopentadienyl indium (InCp) and hydrogen peroxide (H 2 O 2 ) as precursors. The In 2 O 3 films can be deposited preferentially at relatively low temperatures of 160-200 °C, exhibiting a stable growth rate of 1.4-1.5 Å/cycle. The surface roughness of the deposited film increases gradually with deposition temperature, which is attributed to the enhanced crystallization of the film at a higher deposition temperature. As the deposition temperature increases from 150 to 200 °C, the optical band gap (E g ) of the deposited film rises from 3.42 to 3.75 eV. In addition, with the increase of deposition temperature, the atomic ratio of In to O in the as-deposited film gradually shifts towards that in the stoichiometric In 2 O 3 , and the carbon content also reduces by degrees. For 200 °C deposition temperature, the deposited film exhibits an In:O ratio of 1:1.36 and no carbon incorporation. Further, high-performance In 2 O 3 thin-film transistors with an Al 2 O 3 gate dielectric were achieved by post-annealing in air at 300 °C for appropriate time, demonstrating a field-effect mobility of 7.8 cm 2 /V⋅s, a subthreshold swing of 0.32 V/dec, and an on/off current ratio of 10 7 . This was ascribed to passivation of oxygen vacancies in the device channel.

Influence of deposition temperature of thermal ALD deposited Al2O3 films on silicon surface passivation

Directory of Open Access Journals (Sweden)

Neha Batra

2015-06-01

Full Text Available The effect of deposition temperature (Tdep and subsequent annealing time (tanl of atomic layer deposited aluminum oxide (Al2O3 films on silicon surface passivation (in terms of surface recombination velocity, SRV is investigated. The pristine samples (as-deposited show presence of positive fixed charges, QF. The interface defect density (Dit decreases with increase in Tdep which further decreases with tanl up to 100s. An effective surface passivation (SRV<8 cm/s is realized for Tdep ≥ 200 °C. The present investigation suggests that low thermal budget processing provides the same quality of passivation as realized by high thermal budget process (tanl between 10 to 30 min.

Ore reserve estimation of uranium deposit Zirovski vrh

International Nuclear Information System (INIS)

Lukacs, E.

1979-01-01

The uranium ore deposit Zirovski vrh is in the Permian sediments of Northwest Yugoslavia. Lenticular bodies occur at several stratiform levels in grey, medium-grained sandstone. The ore deposit will be mined entirely by underground methods. It is possible to define three stages of deposit evaluation requiring different densities of exploration effort: preliminary evaluation of in situ ore reserves; evaluation of mineable ore reserves; evaluation of production capability and mine planning. The drilling density increases markedly with each succeeding stage. The optimal drilling density for all three stages of evaluation should be determined, but there is some concern that too close spaced drilling would considerably increase the exploration costs without a corresponding increase in effectiveness. On the other hand, too sparsely spaced drilling may result in some difficulties in following the ore in mining. The paper treats the problem of the density of drilling for evaluation of mineable ore reserves compared to that required for mine planning and mine production capability. The purpose of investigation of mineral raw materials is to define economic deposits (ore bodies). To evaluate the deposit economically an accurate reserve estimate is required. If it is accordingly established that such an estimate is within the degree of admissible error, the purpose of the exploration is satisfied. However, the problem as to whether the drilling grid is sufficiently dense remains, because the majority of estimates of ore reserves do not provide a measure of the reliability of the estimate. (author)

Guaranteed Student Loan Amendments of 1976. Ninety-fourth Congress, Second Session. Report No. 94-1232.

Science.gov (United States)

Congress of the U.S., Washington, DC. House.

A report on the Guaranteed Student Loan Amendments (H.R. 14070) to Title IV of the Higher Education Act of 1965 considers the problems behind and implications of the loan program. Chief among the problems are the default rate, access to loans, the schools as lenders, and the role of the states in administering the program. Changes recommended…

Nitrogen deposition and its ecological impact in China: An overview

Energy Technology Data Exchange (ETDEWEB)

Liu Xuejun, E-mail: xuejun.13500@gmail.com [College of Resources and Environmental Sciences, China Agricultural University, Beijing 100193 (China) and Xinjiang Institute of Ecology and Geography, Chinese Academy of Sciences, Urumqi 830011 (China); Duan Lei [Department of Environmental Science and Engineering, Tsinghua University, Beijing 100084 (China); Mo Jiangming [South China Botanical Garden, Chinese Academy of Sciences, Guangzhou 510650 (China); Du Enzai [College of Urban and Environmental Sciences, Peking University, Beijing 100871 (China); Shen Jianlin [College of Resources and Environmental Sciences, China Agricultural University, Beijing 100193 (China); Lu Xiankai [South China Botanical Garden, Chinese Academy of Sciences, Guangzhou 510650 (China); Zhang Ying [College of Resources and Environmental Sciences, China Agricultural University, Beijing 100193 (China); Zhou Xiaobing [Xinjiang Institute of Ecology and Geography, Chinese Academy of Sciences, Urumqi 830011 (China); He Chune [Institute of Geographic Sciences and Natural Resources Research,Chinese Academy of Sciences, Beijing 100101 (China); Zhang Fusuo [College of Resources and Environmental Sciences, China Agricultural University, Beijing 100193 (China)

2011-10-15

Nitrogen (N) deposition is an important component in the global N cycle that has induced large impacts on the health and services of terrestrial and aquatic ecosystems worldwide. Anthropogenic reactive N (N{sub r}) emissions to the atmosphere have increased dramatically in China due to rapid agricultural, industrial and urban development. Therefore increasing N deposition in China and its ecological impacts are of great concern since the 1980s. This paper synthesizes the data from various published papers to assess the status of the anthropogenic N{sub r} emissions and N deposition as well as their impacts on different ecosystems, including empirical critical loads for different ecosystems. Research challenges and policy implications on atmospheric N pollution and deposition are also discussed. China urgently needs to establish national networks for N deposition monitoring and cross-site N addition experiments in grasslands, forests and aquatic ecosystems. Critical loads and modeling tools will be further used in N{sub r} regulation. - This paper reviews current knowledge on nitrogen deposition and its effects across China

Nitrogen deposition and its ecological impact in China: An overview

International Nuclear Information System (INIS)

Liu Xuejun; Duan Lei; Mo Jiangming; Du Enzai; Shen Jianlin; Lu Xiankai; Zhang Ying; Zhou Xiaobing; He Chune; Zhang Fusuo

2011-01-01

Nitrogen (N) deposition is an important component in the global N cycle that has induced large impacts on the health and services of terrestrial and aquatic ecosystems worldwide. Anthropogenic reactive N (N r ) emissions to the atmosphere have increased dramatically in China due to rapid agricultural, industrial and urban development. Therefore increasing N deposition in China and its ecological impacts are of great concern since the 1980s. This paper synthesizes the data from various published papers to assess the status of the anthropogenic N r emissions and N deposition as well as their impacts on different ecosystems, including empirical critical loads for different ecosystems. Research challenges and policy implications on atmospheric N pollution and deposition are also discussed. China urgently needs to establish national networks for N deposition monitoring and cross-site N addition experiments in grasslands, forests and aquatic ecosystems. Critical loads and modeling tools will be further used in N r regulation. - This paper reviews current knowledge on nitrogen deposition and its effects across China

Aerial electrostatic spray deposition and canopy penetration in cotton

Science.gov (United States)

Spray deposition on abaxial and adaxial leaf surfaces along with canopy penetration are essential for insect control and foliage defoliation in cotton production agriculture. Researchers have reported that electrostatically charged sprays have increased spray deposit onto these surfaces under widel...

Effect of Pt coverage in Pt-deposited Pd nanostructure electrodes on electrochemical properties

Energy Technology Data Exchange (ETDEWEB)

Park, Ah-Reum; Lee, Young-Woo; Kwak, Da-Hee; Park, Kyung-Won [Soongsil University, Seoul (Korea, Republic of)

2015-06-15

We have fabricated Pt-deposited Pd electrodes via a two-gun sputtering deposition system by separately operating Pd and Pt target as a function of sputtering time of Pt target. For Pt-deposited Pd electrodes (Pd/Pt-X), Pd were first deposited on the substrates at 20 W for 5min, followed by depositing Pt on the Pd-only electrodes as a function of sputtering time (X=1, 3, 5, 7, and 10min) at 20W on the Pt target. As the sputtering time of Pt target increased, the portion of Pt on the Pd electrodes increased, representing an increased coverage of Pt on the Pd electrodes. The Pd/Pt-7 electrode having an optimized Pt coverage exhibits an excellent electrocatalytic activity for methanol oxidation reaction.

Studies Concerning Water-Surface Deposits in Recovery Boilers

Energy Technology Data Exchange (ETDEWEB)

Strandberg, O; Arvesen, J; Dahl, L

1971-11-15

The Feed-water Committee of the Stiftelsen Svensk Cellulosaforskning (Foundation for Swedish Cellulose Research) has initiated research and investigations which aim to increase knowledge about water-surface deposits in boiler tubes, and the resulting risks of gas-surface corrosion in chemical recovery boilers (sulphate pulp industry). The Committee has arranged with AB Atomenergi, Studsvik, for investigations into the water-surface deposits on tubes from six Scandinavian boilers. These investigations have included direct measurements of the thermal conductivity of the deposits, and determinations of their quantity, thickness and structure have been carried out. Previous investigations have shown that gas-surface corrosion can occur at tube temperatures above 330 deg C. The measured values for the thermal conductivity of the deposits indicate that even with small quantities of deposit (c. 1 g/dm2 ) and a moderate boiler pressure (40 atm), certain types of deposit can give rise to the above-mentioned surface temperature, at which the risk of gas-surface corrosion becomes appreciable. For higher boiler pressures the risk is great even with a minimal layer of deposit. The critical deposit thickness can be as low as 0.1 mm

Conditions and timescales for welding block-and-ash flow deposits

Science.gov (United States)

Heap, M. J.; Kolzenburg, S.; Russell, J. K.; Campbell, M. E.; Welles, J.; Farquharson, J. I.; Ryan, A.

2014-12-01

Welding of pyroclastic deposits to reform a coherent rock mass is a common phenomenon, especially for pumiceous pyroclastic density current deposits (i.e., ignimbrites). However, and despite the pervasive abundance of block-and-ash flow (BAF) deposits in the geological and modern record, instances of strongly welded BAF deposits are few. Here, we present a series of high-temperature (800-900 °C) compaction experiments designed to map the conditions (deposit thickness/stress and temperature/viscosity) and timescales that permit or inhibit the welding of BAF deposits. Our experiments were performed on unconsolidated aggregates (containing an ash and lapilli component) derived from crushed and sieved lava blocks (containing 25% crystals) taken from the well-documented welded BAF deposit at Mount Meager volcano (British Columbia, Canada). The experiments demonstrate that welding efficiency increases with increasing time and temperature. Progressive welding is expressed by increasing axial strain, porosity loss, and bulk density. The rate of change of each of these physical properties reduces as welding progresses. Microstructural analysis of the experimental products shows that the loss of interclast porosity during welding results from the progressive sintering and amalgamation of vitric fragments, and that the pore shape changes from sub-equant pores to stretched lenses sandwiched between vitric and crystal fragments. The coincidence between the microstructure and rock physical properties of the natural and experimental samples highlight that we have successfully reproduced welded BAF in the laboratory. Furthermore, our permeability measurements highlight a hysteresis in the return journey of the "there-and-back-again" volcanic permeability cycle (expressed by an increase in permeability due to vesiculation and fragmentation followed by a decrease due to welding). This hysteresis cannot be described by a single porosity-permeability power law relationship and

Strategy for introduction of quality guarantee in the supporting infrastructure to nucleoenergetics for a mixed association

International Nuclear Information System (INIS)

Jimenez, P.; Fernandez, R.

1993-01-01

The work consists in raising and proposing and integral strategy for the assimilation of the quality guarantee by all national enterprises, companies and institutions that participate in the nucleoenergetics program and specially for a mixed association to conclude the construction, starting-up and operation of Juragua nuclear power plants

Geochemical characterization of the Jurassic Amran deposits from Sharab area (SW Yemen): Origin of organic matter, paleoenvironmental and paleoclimate conditions during deposition

Science.gov (United States)

Hakimi, Mohammed Hail; Abdullah, Wan Hasiah; Makeen, Yousif M.; Saeed, Shadi A.; Al-Hakame, Hitham; Al-Moliki, Tareq; Al-Sharabi, Kholah Qaid; Hatem, Baleid Ali

2017-05-01

Calcareous shales and black limestones of the Jurassic Amran Group, located in the Sharab area (SW Yemen), were analysed based on organic and inorganic geochemical methods. The results of this study were used to reconstruct the paleoenvironmental and paleoclimatic conditions during Jurassic time and their relevance to organic matter enrichment during deposition of the Amran calcareous shale and black limestone deposits. The analysed Amran samples have present-day TOC and Stotal content values in the range of 0.25-0.91 wt % and 0.59-4.96 wt %, respectively. The relationship between Stotal and TOC contents indicates that the Jurassic Amran deposits were deposited in a marine environment as supported by biomarker environmental indicators. Biomarker distributions also reflect that the analysed Amran deposits received high contributions of marine organic matter (e.g., algal and microbial) with minor amount of land plant source inputs. Low oxygen (reducing) conditions during deposition of the Jurassic Amran deposits are indicated from low Pr/Ph values and relatively high elemental ratios of V/Ni and V/(V + Ni). Enrichment in the pyrite grains and very high DOPT and high Fe/Al ratios further suggest reducing bottom waters. This paleo-redox (i.e., reducing) conditions contributed to preservation of organic matter during deposition of the Jurassic Amran deposits. Semi-arid to warm climatic conditions are also evidenced during deposition of the Amran sediments and consequently increased biological productivity within the photic zone of the water column during deposition. Therefore, the increased bio-productivity in combination with good preservation of organic matter identified as the major mechanisms that gave rise to organic matter enrichment. This contradicts with the low organic matter content of the present-day TOC values of less than 1%. The biomarker maturity data indicate that the analysed Amran samples are of high thermal maturity; therefore, the low present-day TOC

Discontinuation of approval of modifications in notes, guaranteed under Title VI or VII of the Public Health Service Act, proposed to permit use of the notes as collateral for tax-exempt financings--PHS. Final rule.

Science.gov (United States)

1983-09-21

The Department of Health and Human Services (HHS) adds a new section to regulations for making and guaranteeing loans for construction and modernization of hospitals and medical facilities and to regulations for guaranteeing loans for the construction of teaching facilities for health professions personnel. Under these regulations HHS will not approve the modification of the terms of an existing loan guaranteed under Title VI or Title VII of the Public Health Service (PHS) Act if the modification would permit use of the guarantee (or guaranteed loan) as collateral for tax-exempt financing.

Influence of Gas Flow Rate on the Deposition Rate on Stainless Steel 202 Substrates

OpenAIRE

M.A. Chowdhury; D.M. Nuruzzaman

2012-01-01

Solid thin films have been deposited on stainless steel 202 (SS 202) substrates at different flow rates of natural gas using a hot filament thermal chemical vapor deposition (CVD) reactor. In the experiments, the variations of thin film deposition rate with the variation of gas flow rate have been investigated. The effects of gap between activation heater and substrate on the deposition rate have also been observed. Results show that deposition rate on SS 202 increases with the increase in g...

Recent field studies of dry deposition to surfaces in plant canopies

International Nuclear Information System (INIS)

Lindberg, S.E.; Lovett, G.M.; Bondietti, E.A.; Davidson, C.I.

1984-01-01

A variety of field techniques were used to assess the dry deposition of sulfur. In a deciduous forest canopy in eastern Tennessee, inert petri plates and adjacent chestnut oak leaves showed similar SO 4 -2 deposition velocities of about 0.1 cm s -1 . In the same forest, statistical analysis of throughfall yielded a deposition velocity of 0.48 cm s -1 for total sulfur (SO 4 -2 plus SO 2 ). The throughfall technique appears useful for scaling individual surface measurements to larger spatial and temporal scales. On a grassy field in Illinois, flat Teflon plates, petri dishes, and dustfall buckets were exposed side by side. Measured sulfate deposition increased with increasing rim height on the collection surface, and deposition velocities ranged from 0.14 to 0.70 cm s -1 . Much of the deposition to these surfaces can be attributed to large-particle SO 4 -2 . Dry season (summer) deposition velocities of 7 Be in California were found to be similar to dry deposition velocities of 212 Pb in Tennessee, ranging from 0.18 to 0.35 cm s -1 . These natural radionuclides attach to submicron aerosols in the atmosphere and may be useful tracers of submicron SO 4 -2 deposition. 9 references, 5 figures, 4 tables

TULSA UNIVERSITY PARAFFIN DEPOSITION PROJECTS

Energy Technology Data Exchange (ETDEWEB)

Cem Sarica; Michael Volk

2004-06-01

As oil and gas production moves to deeper and colder water, subsea multiphase production systems become critical for economic feasibility. It will also become increasingly imperative to adequately identify the conditions for paraffin precipitation and predict paraffin deposition rates to optimize the design and operation of these multi-phase production systems. Although several oil companies have paraffin deposition predictive capabilities for single-phase oil flow, these predictive capabilities are not suitable for the multiphase flow conditions encountered in most flowlines and wellbores. For deepwater applications in the Gulf of Mexico, it is likely that multiphase production streams consisting of crude oil, produced water and gas will be transported in a single multiphase pipeline to minimize capital cost and complexity at the mudline. Existing single-phase (crude oil) paraffin deposition predictive tools are clearly inadequate to accurately design these pipelines, because they do not account for the second and third phases, namely, produced water and gas. The objective of this program is to utilize the current test facilities at The University of Tulsa, as well as member company expertise, to accomplish the following: enhance our understanding of paraffin deposition in single and two-phase (gas-oil) flows; conduct focused experiments to better understand various aspects of deposition physics; and, utilize knowledge gained from experimental modeling studies to enhance the computer programs developed in the previous JIP for predicting paraffin deposition in single and two-phase flow environments. These refined computer models will then be tested against field data from member company pipelines.

Influence of solution deposition rate on properties of V{sub 2}O{sub 5} thin films deposited by spray pyrolysis technique

Energy Technology Data Exchange (ETDEWEB)

Abd–Alghafour, N. M., E-mail: na2013bil@gmail.com [Iraqi Ministry of Education, Anbar (Iraq); Ahmed, Naser M.; Hassan, Zai; Mohammad, Sabah M. [Nano-Optoelectronics Research and Technology Laboratory, School of Physics, University Sains Malaysia,11800 Penang (Malaysia)

2016-07-19

Vanadium oxide (V{sub 2}O{sub 5}) thin films were deposited on glass substrates by using a cost-efficient spray pyrolysis technique. The films were grown at 350° through thermal decomposition of VCl{sub 3} in deionized water with different solution spray rates. The high resolution X-ray diffraction results revealed the formation of nanocrystalline films having orthorhombic structures with preferential orientation along (101) direction. The spray rate influenced the surface morphology and crystallite size of the films. The crystallite size was found to increase whereas the micro-strain was decreased by increasing the spray deposition rates. The increase in crystallite size and decrease in the macrostrain resulted in an improvement in the films’ crystallinity. The UV-Visible spectroscopy analysis indicated that the average transmittance of all films lies in the range 75-80 %. The band gap of V{sub 2}O{sub 5} film was decreased from 2.65 to 2.46 eV with increase of the spray deposition rate from 5 ml/min to 10 ml/min. first, second, and third level headings (first level heading).

Effects of surface deposition and droplet injection on film cooling

International Nuclear Information System (INIS)

Wang, Jin; Cui, Pei; Vujanović, Milan; Baleta, Jakov; Duić, Neven; Guzović, Zvonimir

2016-01-01

Highlights: • Cooling effectiveness is significantly affected by the deposition size. • Coverage area for model without mist is reduced by increasing the deposition height. • Wall temperature is decreased by 15% with 2% mist injection. • Cooling coverage is increased by more than three times with 2% mist injection. • Cooling effectiveness for mist models is improved by increasing deposition height. - Abstract: In the present research, the influence of the particle dispersion onto the continuous phase in film cooling application was analysed by means of numerical simulations. The interaction between the water droplets and the main stream plays an important role in the results. The prediction of two-phase flow is investigated by employing the discrete phase model (DPM). The results present heat transfer characteristics in the near-wall region under the influence of mist cooling. The local wall temperature distribution and film cooling effectiveness are obtained, and results show that the film cooling characteristics on the downstream wall are affected by different height of surface deposits. It is also found that smaller deposits without mist injection provide a lower wall temperature and a better cooling performance. With 2% mist injection, evaporation of water droplets improves film cooling effectiveness, and higher deposits cause lateral and downstream spread of water droplets. The results indicate that mist injection can significantly enhance film cooling performance.

High frequency and large deposition of acid fog on high elevation forest.

Science.gov (United States)

Igawa, Manabu; Matsumura, Ko; Okochi, Hiroshi

2002-01-01

We have collected and analyzed fogwater on the mountainside of Mt. Oyama (1252 m) in the Tanzawa Mountains of Japan and observed the fog event frequency from the base of the mountain with a video camera. The fog event frequency increased with elevation and was observed to be present 46% of the year at the summit. The water deposition via throughfall increased with elevation because of the increase in fogwater interception and was about twice that via rain at the summit, where the air pollutant deposition via throughfall was several times that via rainwater. The dry deposition and the deposition via fogwater were dominant factors in the total ion deposition at high elevation sites. In a fog event, nitric acid, the major acid component on the mountain, is formed during the transport of the air mass from the base of the mountain along the mountainside, where gases including nitric acid deposit and are scavenged by fogwater. Therefore, high acidity caused by nitric acid and relatively low ion strength are observed in the fogwater at high elevation sites.

[Effects of simulated nitrogen deposition on weeds growth and nitrogen uptake].

Science.gov (United States)

Jiang, Qiqing; Tang, Jianjun; Chen, Xin; Chen, Jing; Yang, Ruyi; Hu, S

2005-05-01

In this paper, a greenhouse experiment was conducted to study the responses of different functional groups weeds to simulated nitrogen deposition (4.0 g N.m(-2).yr(-1)). Native weed species Poa annua, Lolium perenne, Avena fatua, Medicago lupulina, Trifolium repens, Plantago virginica, Veronica didyma, Echinochloa crusgalli var. mitis, Eleusine indica and Amaranthus spinosus in orchard ecosystem were used test materials, and their above-and underground biomass and nitrogen uptake were measured. The results showed that under simulated N deposition, the total biomass, shoot biomass and root biomass of all weed species tended increase, while the total biomass was differed for different functional groups of weeds. The biomass of C4 grass, legumes and C3 grass was significantly increased under N deposition, while that of C3 and C4 forbs was not significantly impacted. The root/shoot biomass ratio of Avena fatua and Plantago virginica was enhanced by N deposition, but that of Poa annu, Lolium perenne, Medicago lupulina, Trifolium repens and Amarathus spinosus was not impacted significantly. N deposition had no significant effect on plant N concentration, but significantly enhanced the N uptake of all test weed species except Amarathus spinosus, Poa annua and Veronica didyma. was suggested that the further increase of N deposition might speed up the changes of the community structure weed species due to their different responses to N deposition.

76 FR 54454 - Issuance of Loan Guarantee to Genesis Solar, LLC, for the Genesis Solar Energy Project

Science.gov (United States)

2011-09-01

... DEPARTMENT OF ENERGY Issuance of Loan Guarantee to Genesis Solar, LLC, for the Genesis Solar... Energy Project (GSEP), a 250-megawatt (MW) nominal capacity solar power generating facility on.../Final Environmental Impact Statement for the Genesis Solar Energy Project, Riverside County, California...

Defect control in room temperature deposited cadmium sulfide thin films by pulsed laser deposition

Energy Technology Data Exchange (ETDEWEB)

Hernandez-Como, N. [Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, TX, 75080 (United States); Martinez-Landeros, V. [Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, TX, 75080 (United States); Centro de Investigación en Materiales Avanzados, Monterrey, Nuevo Leon, 66600, México (Mexico); Mejia, I. [Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, TX, 75080 (United States); Aguirre-Tostado, F.S. [Centro de Investigación en Materiales Avanzados, Monterrey, Nuevo Leon, 66600, México (Mexico); Nascimento, C.D.; Azevedo, G. de M; Krug, C. [Instituto de Física, Universidade Federal do Rio Grande do Sul, Porto Alegre, 91509-900 (Brazil); Quevedo-Lopez, M.A., E-mail: mquevedo@utdallas.edu [Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, TX, 75080 (United States)

2014-01-01

The control of defects in cadmium sulfide thin films and its impact on the resulting CdS optical and electrical characteristics are studied. Sulfur vacancies and cadmium interstitial concentrations in the CdS films are controlled using the ambient pressure during pulsed laser deposition. CdS film resistivities ranging from 10{sup −1} to 10{sup 4} Ω-cm are achieved. Hall Effect measurements show that the carrier concentration ranges from 10{sup 19} to 10{sup 13} cm{sup −3} and is responsible for the observed resistivity variation. Hall mobility varies from 2 to 12 cm{sup 2}/V-s for the same pressure regime. Although the energy bandgap remains unaffected (∼ 2.42 eV), the optical transmittance is reduced due to the increase of defects in the CdS films. Rutherford back scattering spectroscopy shows the dependence of the CdS films stoichiometry with deposition pressure. The presence of CdS defects is attributed to more energetic species reaching the substrate, inducing surface damage in the CdS films during pulsed laser deposition. - Highlights: • CdS thin films deposited by pulsed laser deposition at room temperature. • The optical, electrical and structural properties were evaluated. • Carrier concentration ranged from 10{sup 19} to 10{sup 13} cm{sup −3}. • The chemical composition was studied by Rutherford back scattering. • The density of sulfur vacancies and cadmium interstitial was varied.

Deposition of ultrafine aerosols in F344/N rat nasal casts

Energy Technology Data Exchange (ETDEWEB)

Cheng, Y S; Hansen, G K; Su, Y F; Yeh, H C; Morgan, K T [Chemical Industry Institute of Toxicology, Research Triangle Park, NC (United States)

1988-12-01

Determination of regional respiratory deposition of inhaled aerosols is critical for evaluation of the health effects of air pollutants. Information on deposition of larger particles (> 0.02 {mu}m) in the nasal passages of laboratory animals is available; the deposition fraction increases with increasing particle size. Little information on ultrafine particles less than 0.2 {mu}m is available. Molds (models) were prepared from replica casts of the nasal passages of F344/N rats, using clear casting plastic. Total deposition of ultrafine aerosols in these casts was then determined using a unidirectional flow system. Measured pressure drops in the casts were a function of flow rate to the power of 1.4-1.6, indicating that the flow through the nasal passage was not laminar. Deposition data were obtained from these casts, using monodisperse sodium chloride aerosols with particle size ranging from 0.2 to 0.005 {mu}m, at inspiratory and expiratory flow rates of 200 to 600 cc/min. Similar deposition data were obtained for the three casts studied. The deposition efficiency was greatest for the smallest particles, and decreased with increasing particle size and flow rate, indicating that diffusion was the dominant mechanism for deposition. At an inspiratory flow rate of 400 cc/min, which is comparable to a respiratory minute volume of 200 cc/min for mature male F344/N rats, deposition efficiencies reached 40 and 70% for 0.01 and 0.005 {mu}m particles, respectively. Turbulent diffusion was considered to be the dominant mechanism for deposition of ultrafine particles in the nasal passage. This information is important for understanding the toxicity and carcinogenicity of submicrometer particles, including diesel soot, radon progeny and vapors. (author)

An earth system model for evaluation of dry deposition

Energy Technology Data Exchange (ETDEWEB)

Arritt, R.W. [Iowa State Univ., Ames, IA (United States)

1994-12-31

A coupled model of atmosphere, soil, and vegetation showed that interactions among the various components can have important effects on dry deposition of SO{sub 2}. In particular, dry soil (near or below the wilting point) leads to an increase of stomatal resistance and a decrease in deposition. Once the soil moisture is at least twice the wilting point, the model results indicate that additional moisture has little effect on the accumulated daytime dry deposition.

WC-Co coatings deposited by the electro-thermal chemical spray method

Energy Technology Data Exchange (ETDEWEB)

Zhitomirsky, V.N. [Tel Aviv Univ. (Israel). Faculty of Engineering; Wald, S.; Rabani, L.; Zoler, D. [Propulsion Physics Division, SOREQ NRC, 81800, Yavne (Israel); Factor, M.; Roman, I. [School of Applied Sciences, The Hebrew University, 91904, Jerusalem (Israel); Cuperman, S.; Bruma, C. [School of Physics and Astronomy, Tel-Aviv University, 69978, Tel-Aviv (Israel)

2000-10-02

A novel thermal spray technology - an electro-thermal chemical spray (ETCS) for producing hard coatings is presented. The experimental coating apparatus consists of a machine gun barrel, a cartridge containing the coating material in powder form, a solid propellant, and a plasma ignition system. The plasma ignition system produces plasma in pulsed mode to ignite the solid propellant. On ignition, the drag force exerted by the combustion gases accelerates the powder particles towards the substrate. Using the ETCS technique, the process of single-shot WC-Co coating deposition on stainless steel substrate was studied. The influence of process parameters (plasma energy, mass of the solid propellant and the coated powder, distance between the gun muzzle and the substrate) on the coating structure and some of its properties were investigated. It was shown that ECTS technique effectively deposited the WC-Co coating with deposition thicknesses of 100-200 {mu}m per shot, while deposition yield of {proportional_to}70% was attained. The WC-Co coatings consisted of carbide particles distributed in amorphous matrix. The powder particle velocity was found to depend on the solid propellant mass and was weakly dependent on the plasma energy, while the particle processing temperature was strongly dependent on the plasma energy and almost independent of the solid propellant mass. Whilst increasing the solid propellant mass from 5 to 7 g, the deposition rate and yield correspondingly increased. When increasing the plasma energy, the temperature of the powder particles increased, the average carbide particle size decreased and their shape became more rounded. The deposition yield and microhardness at first increased and then achieved saturation by increasing the plasma energy. (orig.)

Basic income guarantee: a review of implications for oral health.

Science.gov (United States)

Chen, Yi-An; Quiñonez, Carlos

2018-12-01

To: a) Familiarize readers with the concept of a basic income guarantee (BIG) and its different forms; b) Consider how BIG could improve oral health and decrease oral health disparities; c) Motivate readers to advocate for the evaluation of oral health outcomes in BIG experiments. Published articles and book chapters that have analyzed and reviewed data from past BIG pilot projects were examined for their findings on health and socioeconomic outcomes. Our findings suggest various areas and mechanisms whereby BIG can influence oral health-related outcomes, whether through impacts on work, illness and injury, education, a social multiplier effect, expenditure behavior, and/or mental illness and other health outcomes. Our findings illustrate the importance of assessing oral health-related outcomes in future BIG pilot projects. © 2017 American Association of Public Health Dentistry.

Acid Deposition Phenomena

International Nuclear Information System (INIS)

Ramadan, A.E.K.

2004-01-01

Acid deposition, commonly known as acid rain, occurs when emissions from the combustion of fossil fuels and other industrial processes undergo complex chemical reactions in the atmosphere and fall to the earth as wet deposition (rain, snow, cloud, fog) or dry deposition (dry particles, gas). Rain and snow are already naturally acidic, but are only considered problematic when less than a ph of 5.0 The main chemical precursors leading to acidic conditions are atmospheric concentrations of sulfur dioxide (SO 2 ) and nitrogen oxides (NO x ). When these two compounds react with water, oxygen, and sunlight in the atmosphere, the result is sulfuric (H 2 SO 4 ) and nitric acids (HNO 3 ), the primary agents of acid deposition which mainly produced from the combustion of fossil fuel and from petroleum refinery. Airborne chemicals can travel long distances from their sources and can therefore affect ecosystems over broad regional scales and in locations far from the sources of emissions. According to the concern of petroleum ministry with the environment and occupational health, in this paper we will discussed the acid deposition phenomena through the following: Types of acidic deposition and its components in the atmosphere Natural and man-made sources of compounds causing the acidic deposition. Chemical reactions causing the acidic deposition phenomenon in the atmosphere. Factors affecting level of acidic deposition in the atmosphere. Impact of acid deposition. Procedures for acidic deposition control in petroleum industry

Effects of annealing temperatures on the physicochemical properties of nickel-phosphorus deposits

International Nuclear Information System (INIS)

Bai, Allen; Hu, C.-C.

2003-01-01

The dependence of physicochemical properties, including microhardness, magnetism, morphology, crystalline information, roughness factor and hydrogen evolution ability, on the phosphorus content, varying from 0 to 28 atomic percentage (at.%), of Ni-P deposits with annealing in air at eight temperatures (i.e., 100, 200, 300, 400, 500, 600, 700 and 800 deg. C) were systematically compared. The microhardness reached a maximum at 400 deg. C due to the crystallization of Ni and Ni 3 P at 400 deg. C and the significant diffusion of Cu into the Ni-P deposit at temperatures ≥500 deg. C, confirmed by the depth profiles of Ni, P, Cu and O elements. The paramagnetism of Ni-P deposit was gradually transformed into ferromagnetism at 400 deg. C, attributable to the phase separation of Ni and Ni 3 P. The roughness factor, R a , of the deposits with P contents ≤12 at.% were increased with increasing the annealing temperature at temperatures a of the deposits with 17-28 at.% of P is approximately independent of the annealing temperature. The rate of hydrogen evolution decreased with increasing the annealing temperature because the specific activity (i/R a ) of the Ni-P deposits was decreased with increasing the annealing temperature

Physical deposition behavior of stiff amphiphilic polyelectrolytes in an external electric field

Science.gov (United States)

Hu, Dongmei; Zuo, Chuncheng; Cao, Qianqian; Chen, Hongli

2017-08-01

Coarse-grained molecular dynamics simulations are conducted to study the physical deposition behavior of stiff amphiphilic polyelectrolytes (APEs) in an external electric field. The effects of chain stiffness, the charge distribution of a hydrophilic block, and electric field strength are investigated. Amphiphilic multilayers, which consist of a monolayer of adsorbed hydrophilic monomers (HLMs), a hydrophobic layer, and another hydrophilic layer, are formed in a selective solvent. All cases exhibit locally ordered hydrophilic monolayers. Two kinds of hydrophobic micelles are distinguished based on local structures. Stripe and network hydrophobic patterns are formed in individual cases. Increasing the chain stiffness decreases the thickness of the deposited layer, the lateral size of the hydrophobic micelles, and the amount of deposition. Increasing the number of positively charged HLMs in a single chain has the same effect as increasing chain stiffness. Moreover, when applied normally to the substrate, the electric field compresses the deposited structures and increases the amount of deposition by pulling more PEs toward the substrate. A stronger electric field also facilitates the formation of a thinner and more ordered hydrophilic adsorption layer. These estimates help us explore how to tailor patterned nano-surfaces, nano-interfaces, or amphiphilic nanostructures by physically depositing semi-flexible APEs which is of crucial importance in physical sciences, life sciences and nanotechnology.

The Guarantee Contract as a Typical Warranty Business in Brazilian Civil Law

Directory of Open Access Journals (Sweden)

Fábio Siebeneichler de Andrade

2016-12-01

Full Text Available This paper deals with the guarantee contract, which is one of the most important forms of legal assurance business. It is one of the most widely used businesses in Brazilian negotiating practice. In this sense, considering the fact that Brazilian Private Law has gone through a renovation, by virtue of legislation such as the Civil Code of 2002 and the Consumer Protection Code, which welcomed the principle of good faith and social function of the contract, it is necessary to examine this important contract and check if it’s discipline is appropriate to the new contractual principles.

Increased brain iron deposition is a risk factor for brain atrophy in patients with haemodialysis: a combined study of quantitative susceptibility mapping and whole brain volume analysis.

Science.gov (United States)

Chai, Chao; Zhang, Mengjie; Long, Miaomiao; Chu, Zhiqiang; Wang, Tong; Wang, Lijun; Guo, Yu; Yan, Shuo; Haacke, E Mark; Shen, Wen; Xia, Shuang

2015-08-01

To explore the correlation between increased brain iron deposition and brain atrophy in patients with haemodialysis and their correlation with clinical biomarkers and neuropsychological test. Forty two patients with haemodialysis and forty one age- and gender-matched healthy controls were recruited in this prospective study. 3D whole brain high resolution T1WI and susceptibility weighted imaging were scanned on a 3 T MRI system. The brain volume was analyzed using voxel-based morphometry (VBM) in patients and to compare with that of healthy controls. Quantitative susceptibility mapping was used to measure and compare the susceptibility of different structures between patients and healthy controls. Correlation analysis was used to investigate the relationship between the brain volume, iron deposition and neuropsychological scores. Stepwise multiple regression analysis was used to explore the effect of clinical biomarkers on the brain volumes in patients. Compared with healthy controls, patients with haemodialysis showed decreased volume of bilateral putamen and left insular lobe (All P brain iron deposition is negatively correlated with the decreased volume of bilateral putamen (P brain iron deposition and dialysis duration was risk factors for brain atrophy in patients with haemodialysis. The decreased gray matter volume of the left insular lobe was correlated with neurocognitive impairment.

75 FR 25829 - Notice of Acceptance of Proposals for the Section 538 Multi-Family Housing Guaranteed Rural...

Science.gov (United States)

2010-05-10

... through the construction and permanent loan financing phases of a project. Those applications that meet... and will be in effect throughout both of the project's construction and permanent financing phases... loans. The Agency can guarantee the ``construction and permanent'' financing phases of a project. The...

Emissions of nitric oxide from 79 plant species in response to simulated nitrogen deposition

International Nuclear Information System (INIS)

Chen Juan; Wu Feihua; Liu Tingwu; Chen Lei; Xiao Qiang; Dong Xuejun; He Junxian; Pei Zhenming; Zheng Hailei

2012-01-01

To assess the potential contribution of nitric oxide (NO) emission from the plants grown under the increasing nitrogen (N) deposition to atmospheric NO budget, the effects of simulated N deposition on NO emission and various leaf traits (e.g., specific leaf area, leaf N concentration, net photosynthetic rate, etc.) were investigated in 79 plant species classified by 13 plant functional groups. Simulated N deposition induced the significant increase of NO emission from most functional groups, especially from conifer, gymnosperm and C 3 herb. Moreover, the change rate of NO emission was significantly correlated with the change rate of various leaf traits. We conclude that the plants grown under atmospheric N deposition, especially in conifer, gymnosperm and C 3 herb, should be taken into account as an important biological source of NO and potentially contribute to atmospheric NO budget. - Highlights: ► Simulated N deposition induces the significant increase of NO emission from plants. ► The increased NO emission is closely related to leaf N level and net photosynthesis. ► Abundant nitrite accumulation is a reason of NO emission induced by excess N input. ► The plants grown under N deposition potentially contribute to atmospheric NO budget. - Simulated N deposition induced a significant increase of NO emission from 79 plants.