Yb2Si2O7 Environmental Barrier Coatings Deposited by Various Thermal Spray Techniques: A Preliminary Comparative Study

Science.gov (United States)

Bakan, Emine; Marcano, Diana; Zhou, Dapeng; Sohn, Yoo Jung; Mauer, Georg; Vaßen, Robert

2017-08-01

Dense, crack-free, uniform, and well-adhered environmental barrier coatings (EBCs) are required to enhance the environmental durability of silicon (Si)-based ceramic matrix composites in high pressure, high gas velocity combustion atmospheres. This paper represents an assessment of different thermal spray techniques for the deposition of Yb2Si2O7 EBCs. The Yb2Si2O7 coatings were deposited by means of atmospheric plasma spraying (APS), high-velocity oxygen fuel spraying (HVOF), suspension plasma spraying (SPS), and very low-pressure plasma spraying (VLPPS) techniques. The initial feedstock, as well as the deposited coatings, were characterized and compared in terms of their phase composition. The as-sprayed amorphous content, microstructure, and porosity of the coatings were further analyzed. Based on this preliminary investigation, the HVOF process stood out from the other techniques as it enabled the production of vertical crack-free coatings with higher crystallinity in comparison with the APS and SPS techniques in atmospheric conditions. Nevertheless, VLPPS was found to be the preferred process for the deposition of Yb2Si2O7 coatings with desired characteristics in a controlled-atmosphere chamber.

Environmental impact assessment report

Energy Technology Data Exchange (ETDEWEB)

Jung, K. J.; Paik, S. T.; Chung, U. S.; Jung, K. H.; Park, S. K.; Lee, D. G.; Kim, H. R.; Kim, J. K.; Yang, S. H.; Lee, B. J.; Kim, E. H.; Choi, K. S

2000-10-01

This report is the revised Environmental Impact Assessment Report which was made and submitted as one of the license documents for TRIGA Research Reactor D and D Project. The Environmental Impact Assessment Report includes introduction of decommissioning plan, status of reactors and environmental impact of surroundings. Also it was assessed and analyzed on radioactivity for environment, and the plan was established to minimize radioactive material release. Finally environmental monitoring plan was established to confirm whether contaminated or not from radioactivity during decommissioning period. According to the assessment results, the risk of excess exposure will be not on environment and public. The first Environmental Impact Assessment Report was submitted to the government for the license and reviewed by Korea Institute of Nuclear Safety. The first Report was revised including answers for the questions arising from review process.

Cumulative Impact Assessment: Approaching Environmental Capacity in Development Area Using Environmental Impact Assessment Information

Science.gov (United States)

Cho, N.; Lee, M. J.; Maeng, J. H.

2017-12-01

Environmental impact assessment estimates the impact of development as a business unit and establishes mitigation plan. If the development is done, its economic effects can spread to the nearby areas. So that various developments can be distributed at different time intervals. The impact of the new developments can be combined with existing environmental impacts and can have a larger impact. That is, Cumulative impact assessment is needed to consider the environmental capacity of the Nearby area. Cumulative impact assessments require policy tools such as environmental impact assessment information and cumulative impact estimation models. In Korea, environmental information (water quality, air quality, etc.) of the development site is measured for environmental impact assessment and monitored for a certain period (generally 5 years) after the project. In addition, by constructing the environmental information as a spatial database, it is possible to express the environmental impact on a regional basis spatially and to intuitively use it for development site selection. Utilizing a composite model of environmental impact assessment information and Remote Sensing data for cumulative impact estimation, That can be used as a policy decision support tool that provides quantitative information for development area management, such as time series effect and sprawl phenomenon.

Acidic precipitation. Volume 3: Sources, deposition, and canopy interactions. Advances in environmental science

Energy Technology Data Exchange (ETDEWEB)

Lindberg, S.E.; Page, A.L.; Norton, S.A. (eds.)

1990-01-01

As has been the case with many environmental issues of the twentieth century, acidic precipitation has its origin in emissions to the atmosphere of numerous compounds from both natural and man-made sources. This volume emphasizes the atmospheric aspects of acidic precipitation and all that this term has come to include (e.g. toxic gases such as ozone, trace metals, aluminum, and oxides of nitrogen). It progresses from emissions of the precursors of acidic precipitation to their eventual deposition on environmental surfaces. The chapters describe the sources of acidic and basic airborne substances, their interactions in the atmosphere and with rain droplets, and their reactions with other airborne constituents such as aluminum and other metals. Also discussed are the use of metals as tracers of sources of the precursors of acidic precipitation and as tracers of historical deposition rates, the processes controlling the removal of airborne material as dry deposition and deposition interactions with the forest canopy, and past and future trends in atmospheric emissions and options for their abatement.

An environmental assessment system for environmental technologies

DEFF Research Database (Denmark)

Clavreul, Julie; Baumeister, Hubert; Christensen, Thomas Højlund

2014-01-01

A new model for the environmental assessment of environmental technologies, EASETECH, has been developed. The primary aim of EASETECH is to perform life-cycle assessment (LCA) of complex systems handling heterogeneous material flows. The objectives of this paper are to describe the EASETECH...

Environmental Assessment for the vacuum process laboratory (VPL) relocation at the Lawrence Livermore National Laboratory

International Nuclear Information System (INIS)

1992-04-01

This Environmental Assessment (EA) evaluates the potential environmental impacts of relocating a vacuum process laboratory (VPL) from Building 321 to Building 2231 at Lawrence Livermore National Laboratory (LLNL). The VPL provides the latest technology in the field of vacuum deposition of coatings onto various substrates for several weapons-related and energy-related programs at LLNL. Operations within the VPL at LLNL will not be expanded nor reduced by the relocation. No significant environmental impacts are expected as a result of the relocation of the VPL

Energy and environmental assessment

DEFF Research Database (Denmark)

Lund, Henrik; Sukkumnoed, Decharut

2004-01-01

The paper introduce and discuss strategic environmental assessment (SEA) and economic assessment for energy innovation and suggests approach to influence support for sustainable energy development in Thailand.......The paper introduce and discuss strategic environmental assessment (SEA) and economic assessment for energy innovation and suggests approach to influence support for sustainable energy development in Thailand....

Integrating environmental and socioeconomic assessment

International Nuclear Information System (INIS)

Branch, K.M.; Cluett, C.; Page, T.L.

1987-01-01

Since the passage of the National Environmental Policy Act (NEPA) in 1969, considerable scientific and regulatory attention has been given to the preparation of environmental impact assessments. Part of this attention has been directed to definition of the proper scope of an environmental assessment and to debate about how the ''human environment'' should be addressed. This debate continues, and is reflected in the ongoing evolution of the definition of and relationship between the ''environmental'' and ''socioeconomic'' components of an integrated environmental impact assessment. This paper discusses the need for close integration between the environmental and socioeconomic assessment efforts and examines some of the benefits and difficulties of achieving this integration

Models and parameters for environmental radiological assessments

International Nuclear Information System (INIS)

Miller, C.W.

1983-01-01

This article reviews the forthcoming book Models and Parameters for Environmental Radiological Assessments, which presents a unified compilation of models and parameters for assessing the impact on man of radioactive discharges, both routine and accidental, into the environment. Models presented in this book include those developed for the prediction of atmospheric and hydrologic transport and deposition, for terrestrial and aquatic food-chain bioaccumulation, and for internal and external dosimetry. Summaries are presented for each of the transport and dosimetry areas previously for each of the transport and dosimetry areas previously mentioned, and details are available in the literature cited. A chapter of example problems illustrates many of the methodologies presented throughout the text. Models and parameters presented are based on the results of extensive literature reviews and evaluations performed primarily by the staff of the Health and Safety Research Division of Oak Ridge National Laboratory

Steam generator deposit control program assessment at Comanche Peak

International Nuclear Information System (INIS)

Stevens, J.; Fellers, B.; Orbon, S.

2002-01-01

Comanche Peak has employed a variety of methods to assess the effectiveness of the deposit control program. These include typical methods such as an extensive visual inspection program and detailed corrosion product analysis and trending. In addition, a recently pioneered technique, low frequency eddy current profile analysis (LFEC) has been utilized. LFEC provides a visual mapping of the magnetite deposit profile of the steam generator. Analysis of the LFEC results not only provides general area deposition rates, but can also provide local deposition patterns, which is indicative of steam generator performance. Other techniques utilized include trending of steam pressure, steam generator hideout-return, and flow assisted corrosion (FAC) results. The sum of this information provides a comprehensive assessment of the deposit control program effectiveness and the condition of the steam generator. It also provides important diagnostic and predictive information relative to steam generator life management and mitigative strategies, such as special cleaning procedures. This paper discusses the techniques employed by Comanche Peak Chemistry to monitor the effectiveness of the deposit control program and describes how this information is used in strategic planning. (authors)

Handbook for the assessment of soil erosion and sedimentation using environmental radionuclides

International Nuclear Information System (INIS)

Zapata, F.

2002-01-01

Soil erosion and sedimentation are major environmental and agricultural threats worldwide. There is an urgent need for obtaining reliable information on the rates of these processes to establish the magnitude of the problems and to underpin the selection of soil erosion/sedimentation control technologies, including assessment of their economic and environmental on-site and off-site impacts. The quest for alternative techniques for assessing soil erosion to complement existing classical methods directed attention to the use of environmental radionuclides. Including the latest research developments made in the refinement and standardization of the 137 Cs technique by 25 research groups worldwide and featuring the contributions of a selected team of leading experts in the field, this handbook provides a comprehensive coverage of the methodologies for using radionuclides, primarily 137Cs and 210Pb to establish rates and spatial patterns of soil redistribution and determine the geochronology of sediment deposits. This Handbook is an up-to-date resource for soil and environmental scientists, hydrologists, geomorphologists, geologists, agronomists, ecologists, and upper-level undergraduate and graduate students in these disciplines. (author)

Influence of terrestrial radionuclides on environmental gamma exposure in a uranium deposit in Paraíba, Brazil.

Science.gov (United States)

Araújo Dos Santos Júnior, José; Dos Santos Amaral, Romilton; Simões Cezar Menezes, Rômulo; Reinaldo Estevez Álvarez, Juan; Marques do Nascimento Santos, Josineide; Herrero Fernández, Zahily; Dias Bezerra, Jairo; Antônio da Silva, Alberto; Francys Rodrigues Damascena, Kennedy; de Almeida Maciel Neto, José

2017-07-01

One of the main natural uranium deposits in Brazil is located in the municipality of Espinharas, in the State of Paraíba. This area may present high levels of natural radioactivity due to the presence of these radionuclides. Since this is a populated area, there is need for a radioecological dosimetry assessment to investigate the possible risks to the population. Based on this problem, the objective of this study was to estimate the environmental effective dose outdoors in inhabited areas influenced by the uranium deposit, using the specific activities of equivalent uranium, equivalent thorium and 40 K and conversion factors. The environmental assessment was carried using gamma spectroscopy in sixty-two points within the municipality, with a high-resolution gamma spectrometer with HPGe semiconductor detector and Be window. The results obtained ranged from 0.01 to 19.11 mSv y -1 , with an average of 2.64 mSv y -1 . These levels are, on average, 23 times higher than UNSCEAR reference levels and up to 273 times the reference value of the earth's crust for primordial radionuclides. Therefore, given the high radioactivity levels found, we conclude that there is need for further investigation to evaluate the levels of radioactivity in indoor environments, which will reflect more closely the risks of the local population. Copyright © 2017 Elsevier Inc. All rights reserved.

Environmental Impact Assessment: A Procedure.

Science.gov (United States)

Stover, Lloyd V.

Prepared by a firm of consulting engineers, this booklet outlines the procedural "whys and hows" of assessing environmental impact, particularly for the construction industry. Section I explores the need for environmental assessment and evaluation to determine environmental impact. It utilizes a review of the National Environmental Policy Act and…

Fuels and Materials Examination Facility: Environmental assessment, Hanford site, Richland, Washington: Environmental assessment

International Nuclear Information System (INIS)

1980-07-01

The Fuels and Materials Examination Facility (FMEF) and the High Performance Fuel Laboratory (HPFL) were originally proposed to be constructed as separate facilities in the 400 Area of the Hanford Site near Richland, Washington. The environmental effects of these two facilities were described and evaluated in the FMEF Environmental Assessment and the HPFL Final Environmental Impact Statement, ERDA-1550. For economic reasons, the two facilities will no longer be built as separate facilities. The FMEF facility plans have been modified to incorporate some of the features of the proposed HPFL facility while retaining essentially all of the capabilities of the original FMEF proposal. The purpose of this document is to update the FMEF Environmental Assessment to appropriately reflect addition of certain HPFL features into the FMEF facility and to assess the environmental affects of the facility which resulted from inclusion of HPFL features into the FMEF facility

Environmental Management Assessment of the Fernald Environmental Management Project (FEMP)

Energy Technology Data Exchange (ETDEWEB)

1993-04-01

This report documents the results of the Environmental Management Assessment performed at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. During this assessment, the activities conducted by the assessment team included review of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and FEMP contractor personnel; and inspection and observation of selected facilities and operations. The onsite portion of the assessment was conducted from March 15 through April 1, 1993, by DOE`s Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). EH-24 carries out independent assessments of DOE facilities and activities as part of the EH-1 Environment, Safety, and Health (ES&H) Oversight Audit Program. The EH-24 program is designed to evaluate the status of DOE facilities and activities with respect to compliance with Federal, state, and local environmental laws and regulations; compliance with DOE Orders, Guidance and Directives; conformance with accepted industry practices and standards of performance; and the status and adequacy of management systems developed to address environmental requirements. The Environmental Management Assessment of FEMP focused on the adequacy of environmental management systems. Further, in response to requests by the Office of Environmental Restoration and Waste Management (EM) and Fernald Field Office (FN), Quality Assurance and Environmental Radiation activities at FEMP were evaluated from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section in this report.

Environmental Management Assessment of the Fernald Environmental Management Project (FEMP)

International Nuclear Information System (INIS)

1993-04-01

This report documents the results of the Environmental Management Assessment performed at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. During this assessment, the activities conducted by the assessment team included review of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and FEMP contractor personnel; and inspection and observation of selected facilities and operations. The onsite portion of the assessment was conducted from March 15 through April 1, 1993, by DOE's Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). EH-24 carries out independent assessments of DOE facilities and activities as part of the EH-1 Environment, Safety, and Health (ES ampersand H) Oversight Audit Program. The EH-24 program is designed to evaluate the status of DOE facilities and activities with respect to compliance with Federal, state, and local environmental laws and regulations; compliance with DOE Orders, Guidance and Directives; conformance with accepted industry practices and standards of performance; and the status and adequacy of management systems developed to address environmental requirements. The Environmental Management Assessment of FEMP focused on the adequacy of environmental management systems. Further, in response to requests by the Office of Environmental Restoration and Waste Management (EM) and Fernald Field Office (FN), Quality Assurance and Environmental Radiation activities at FEMP were evaluated from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section in this report

Valuation of environmental problems in landfill deposition and composting - test of methodology; Verdsetting av miljoekonsekvenser av avfallsdeponering og kompostering - metodeutproeving

Energy Technology Data Exchange (ETDEWEB)

Leknes, Einar; Movik, Espen; Wiik, Ragnhild; Meissnes, Rudolf

1995-08-01

This study is aimed at the tests and design of methods for valuation of environmental problems associated with the landfill deposition of household waste. An extensive review of literature has been conducted with respect to the environmental impacts and valuation methods. Environmental impact assessment and valuation with respect to emission of greenhouse gases (GHG's), leachate and disamenity, have been performed for 4 Norwegian landfills. These differ in their approach towards waste treatment in terms of GHG-collection, briquette production and composting and also in their location in terms of proximity to residential areas and the quality of natural recipients. The study shows that the collection of methane and production of briquettes causes major reductions in the generation of GHG's, whereas composting brings significant reductions for all types of environmental impacts. (author)

Valuation of environmental problems in landfill deposition and composting - test of methodology; Verdsetting av miljoekonsekvenser av avfallsdeponering og kompostering - metodeutproeving

Energy Technology Data Exchange (ETDEWEB)

Leknes, Einar; Movik, Espen; Wiik, Ragnhild; Meissnes, Rudolf

1995-08-01

This study is aimed at the tests and design of methods for valuation of environmental problems associated with the landfill deposition of household waste. An extensive review of literature has been conducted with respect to the environmental impacts and valuation methods. Environmental impact assessment and valuation with respect to emission of greenhouse gases (GHG's), leachate and disamenity, have been performed for 4 Norwegian landfills. These differ in their approach towards waste treatment in terms of GHG-collection, briquette production and composting and also in their location in terms of proximity to residential areas and the quality of natural recipients. The study shows that the collection of methane and production of briquettes causes major reductions in the generation of GHG's, whereas composting brings significant reductions for all types of environmental impacts. (author)

The methodology of environmental impacts assessment of environmentally hazardous facilities

OpenAIRE

Adamenko, Yaroslav

2017-01-01

The article deals with the methodology of environmental impacts assessment of environmentally hazardous facilities and activities. The stages of evaluation of environmental impacts are proved. The algorithm and technology of decision-making in the system of environmental impact assessments based on a multi-criteria utility theory are proposed.

Identification and characterization of tsunami deposits off southeast ...

Indian Academy of Sciences (India)

6Institute of Environmental Geosciences, Department of Earth and Environmental Sciences, Pukyong National. University ... challenging topic to be developed in studies on tsunami hazard assessment. Two core ... A tsunami is one of the most terrifying natural hazards .... identify tsunami deposits in a beach environment.

Environmental impacts assessment: Instruments for environmental policy making and resource management

International Nuclear Information System (INIS)

Cavelli, C.M.; Sartori, S.

1993-06-01

This review of evaluation criteria for environmental impacts assessments in Italy covers the following aspects: the efficacy of current Italian normatives governing assessment methods, the current approach of regional public administrations, the necessity for the creation of a national regulating board, environmental impacts assessment for complex environmental systems, the application of impacts assessment recommendations to resource development modelling in the planning of integrated environmental-economic systems, the involvement of the general public in decision making, techniques to determine the monetary worth of environmental resources, the use of multi-criteria analysis techniques

Environmental assessment of lightweight electric vehicles

CERN Document Server

Egede, Patricia

2017-01-01

This monograph adresses the challenge of the environmental assessment of leightweight electric vehicles. It poses the question whether the use of lightweight materials in electric vehicles can reduce the vehicles’ environmental impact and compares the environmental performance of a lightweight electric vehicle (LEV) to other types of vehicles. The topical approach focuses on methods from life cycle assessment (LCA), and the book concludes with a comprehensive concept on the environmental assessment of LEVs. The target audience primarily comprises LCA practitioners from research institutes and industry, but it may also be beneficial for graduate students specializing in the field of environmental assessment.

7 CFR 1955.136 - Environmental Assessment (EA) and Environmental Impact Statement (EIS).

Science.gov (United States)

2010-01-01

... 7 Agriculture 14 2010-01-01 2009-01-01 true Environmental Assessment (EA) and Environmental Impact... Disposal of Inventory Property General § 1955.136 Environmental Assessment (EA) and Environmental Impact Statement (EIS). (a) Prior to a final decision on some disposal actions, an environmental assessment must be...

ENVIRONMENTAL IMPACT ASSESSMENT AND MONITORING ...

African Journals Online (AJOL)

protect the environment, it is imperative to conduct environmental impact assessment ... Ethiopia enacted the Environmental Impact Assessment Proclamation in 2002 ... flora, fauna, soil, air, water, climate, natural or cultural heritage, other.

Environmental contaminants: assessment and control

National Research Council Canada - National Science Library

Vallero, Daniel A

2004-01-01

... Understanding Policy by Understanding Science Connections and Interrelationships of Environmental Science Environmental Assessment and Intervention Engineering Technical Note: Cleaning up a Hazardous Waste Site Social Aspects of Environmental Science Introduction to Environmental Policy The National Environmental Policy Act Issues in Environmental Science: Co...

Environmental assessment in the uranium industry

International Nuclear Information System (INIS)

Frost, S.E.

2002-01-01

The paper examines the subject matter to be dealt with in environmental impact assessments for uranium production facilities, the development of environmental impact statements and the processes used for assessing projects. Different types of regulatory process used to assess projects are described, using Canadian and Australian examples. Some of the techniques used in developing environmental assessments are described. Public participation, including that of special interest groups, is discussed. Some examples of assessments are examined, particularly looking at recent assessments for uranium mining projects in Canada. Trends in environmental assessment are described, using examples from a number of different projects over the past 25 years. Some recommendations for the future are offered. (author)

Environmental assessment in the uranium industry

International Nuclear Information System (INIS)

Frost, S.E.

2000-01-01

The paper examines the subject matter to be dealt with in environmental impact assessments for uranium production facilities, the development of environmental impact statements and the processes used for assessing projects. Different types of regulatory process used to assess projects are described, using Canadian and Australian examples. Some of the techniques used in developing environmental assessments are described. Public participation, including that of special interest groups, is discussed. Some examples of assessments are examined, particularly looking at recent assessments for uranium mining projects in Canada. Trends in environmental assessment are described, using examples from a number of different projects over the past 25 years. Some recommendations for the future are offered. (author)

The Multimedia Environmental Pollutant Assessment System (MEPAS)reg-sign: Atmospheric pathway formulations. Revision

International Nuclear Information System (INIS)

Droppo, J.G.; Buck, J.W.

1996-03-01

The Multimedia Environmental Pollutant Assessment System (MEPAS) is an integrated software implementation of physics-based fate and transport models for health and environmental risk assessments of both radioactive and hazardous pollutants. This atmospheric component report is one of a series of formulation reports that document the MEPAS mathematical models. MEPAS is a multimedia model; pollutant transport is modeled within, through, and between multiple media (air, soil, groundwater, and surface water). The estimated concentrations in the various media are used to compute exposures and impacts to the environment, to maximum individuals, and to populations. The MEPAS atmospheric component for the air media documented in this report includes models for emission from a source to the air, initial plume rise and dispersion, airborne pollutant transport and dispersion, and deposition to soils and crops. The material in this report is documentation for MEPAS Versions 3.0 and 3.1 and the MEPAS version used in the Remedial Action Assessment System (RAAS) Version 1.0

Atmospheric dry and wet deposition of sulphur and nitrogen species and assessment of critical loads of acidic deposition exceedance in South Africa

Directory of Open Access Journals (Sweden)

Stuart J. Piketh

2011-03-01

Full Text Available We tested the hypothesis that acidic atmospheric pollution deposition, originating from the South African central industrial area, poses an environmental threat across a larger region within the dispersal footprint. A network of 37 passive monitoring sites to measure SO₂ and NO₂ was operated from August 2005 to September 2007. The area extended over the entire northern and eastern interior of South Africa. Monitoring locations were chosen to avoid direct impacts from local sources such as towns, mines and highways. Dry deposition rates of SO₂ and NO₂ were calculated from the measured concentrations. Concentrations of sulphur and nitrogen species in wet deposition from a previous study were used in conjunction with measured rainfall for the years 2006 and 2007 to estimate the wet deposition over the region. The calculated total (non-organic acidic deposition formed the basis for an assessment of exceedance of critical loads based on sensitivity of the regional soils. Regional soil sensitivity was determined by combining two major soil attributes available in the World Inventory of Soil Emission Potentials (International Soil Reference and Information Centre. Results indicate that certain parts of the central pollution source area on the South African Highveld have the potential for critical load exceedance, while limited areas downwind show lower levels of exceedance. Areas upwind and remote areas up and downwind, including forested areas of the Drakensberg escarpment, do not show any exceedance of the critical loads.

Assessing atmospheric nitrogen deposition to natural and semi-natural ecosystems – experience from Danish studies using the DAMOS system

DEFF Research Database (Denmark)

Hertel, Ole; Geels, Camilla; Frohn, Lise

2013-01-01

and ammonium (reaction products of nitrogen oxides and ammonia), but also dry deposition of other reactive nitrogen compounds (mainly nitrogen oxides in the form of gas phase nitric acid and nitrogen dioxide). In Denmark's environmental management of the sensitive terrestrial ecosystems modelling tools...... are required that account for both the local and the long-range transported contributions. This motivated development of the Danish Ammonia MOdelling System (DAMOS) that has been successfully applied to the assessment of atmospheric nitrogen loadings to sensitive Danish ecosystems. We present here three...... different examples of such assessments. Our results show that ecosystems located in Western Denmark (Case 1) receive the highest loads of atmospheric nitrogen depositions which generally exceed the critical load. This part of the country has the highest livestock density. In the Eastern part of the country...

Methodology of testing environmental samples from the area surrounding radioactive waste deposits

International Nuclear Information System (INIS)

Kropikova, S.; Pastuchova, D.

1979-01-01

Methods are described of environmental sample investigation in the area surrounding radioactive waste deposits, namely monitoring ground water, surface water, sediments, water flows and catchments, vegetation and soil. Methods of sample preparation, and methods of radionuclides determination in mixtures are also discussed, as are spot activity measurement methods. (author)

Environmental impact assessment screening tool

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-05-01

An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities. 2 figs. 7 refs.

Environmental impact assessment screening tool

International Nuclear Information System (INIS)

1995-05-01

An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities

Assessment of N and P status at the landscape scale using environmental models and measurements

International Nuclear Information System (INIS)

Sonneveld, M.P.W.; Vos, J.A. de; Kros, J.; Knotters, M.; Frumau, A.; Bleeker, A.; Vries, W. de

2012-01-01

We assessed the compliance of a Dutch landscape, dominated by dairy farming, with environmental quality standards using a combination of model calculations and measurements. The total ammonia emission of 2.4 kton NH 3 yr −1 does not exceed the environmental quality standard (2.6 kton NH 3 yr −1 ). Nevertheless, the total N deposition (on average 24.4 kg N ha −1 yr −1 ) is such that critical N loads are exceeded at 53% of the nature areas. The deposited N mainly results from non-agricultural sources and agricultural sources outside the area (72%). The calculated average NO 3 − concentration in the upper groundwater does not exceed the 50 mg l −1 threshold. Calculated annual average N-total and P-total concentrations in discharge water are relatively high but these cannot be directly compared with thresholds for surface water. The results suggest that compliance monitoring at the landscape scale needs to include source indicators and cannot be based on state indicators alone. - Highlights: ► There is scope for environmental monitoring programs at the landscape scale. ► Landscape assessment of state indicators for N and P require models and measurements. ► Monitoring at the landscape scale needs to consider farm management indicators. - The compliance of an agricultural landscape with quality standards is investigated using a combination of model calculations and measurements.

Criticism on Environmental Assessment Tools

NARCIS (Netherlands)

Abdalla, G.; Maas, G.J.; Huyghe, J.; Oostra, M.; Saji Baby, xx; Bogdan Zygmunt, xx

2011-01-01

Using environmental assessment tools to assess the sustainability of buildings, homes and mixed- use area is increasing. Environmental tools assign scores to projects using some sustainability (sub) aspects according to design and realization documents and evidences. Six European sustainable urban

Scope and profoundness of environmental assessments. A study in the frame of environmental impact assessments. Strategic environmental assessment and FFH (fauna-flora-habitat) impact assessment under specific consideration of the conflict wind energy - bird protection

International Nuclear Information System (INIS)

Erb, Mareen

2013-01-01

The legal background of environmental impact assessments and the principle regulations and guidelines for this assessment are shortly summarized. The following Issues are discussed in detail: fundamentals of environmental assessments, profoundness and scope in environmental assessments; the conflict wind energy parks and birds.

Assessment of undiscovered sandstone copper deposits of the Kodar-Udokan area, Russia: Chapter M in Global mineral resource assessment

Science.gov (United States)

Zientek, Michael L.; Chechetkin, Vladimir S.; Parks, Heather L.; Box, Stephen E.; Briggs, Deborah A.; Cossette, Pamela M.; Dolgopolova, Alla; Hayes, Timothy S.; Seltmann, Reimar; Syusyura, Boris; Taylor, Cliff D.; Wintzer, Niki E.

2014-01-01

Mineral resource assessments integrate and synthesize available information as a basis for estimating the location, quality, and quantity of undiscovered mineral resources. This probabilistic mineral resource assessment of undiscovered sandstone copper deposits within Paleoproterozoic metasedimentary rocks of the Kodar-Udokan area in Russia is a contribution to a global assessment led by the U.S. Geological Survey (USGS). The purposes of this study are to (1) delineate permissive areas (tracts) to indicate where undiscovered sandstone-hosted copper deposits may occur within 2 km of the surface, (2) provide a database of known sandstone copper deposits and significant prospects, (3) estimate numbers of undiscovered deposits within these permissive tracts at several levels of confidence, and (4) provide probabilistic estimates of amounts of copper (Cu) and mineralized rock that could be contained in undiscovered deposits within each tract. The workshop for the assessment, held in October 2009, used a three-part form of mineral resource assessment as described by Singer (1993) and Singer and Menzie (2010).

Environmental Workplace Assessment.

Science.gov (United States)

Bernier, Jacques; And Others

1994-01-01

Describes environmental workplace assessments as tools in developing customized training, highlighting the group process and individual interview techniques. Suggests that, by assessing the cultural climate of an organization, education providers can gather essential baseline information on an organization and thereby provide a guide for further…

Strategic environmental assessment

DEFF Research Database (Denmark)

Kørnøv, Lone

1997-01-01

The integration of environmental considerations into strategic decision making is recognized as a key to achieving sustainability. In the European Union a draft directive on Strategic Environmental Assessment (SEA) is currently being reviewed by the member states. The nature of the proposed SEA...... that the SEA directive will influence the decision-making process positively and will help to promote improved environmental decisions. However, the guidelines for public participation are not sufficient and the democratic element is strongly limited. On the basis of these findings, recommendations relating...

Transboundary Environmental Impact Assessment : An Introduction

NARCIS (Netherlands)

Bastmeijer, C.J.; Koivurova, T.; Bastmeijer, K.; Koivurova, T.

2008-01-01

Environmental Impact Assessment (EIA) is a well-established instrument of environmental law and policy that aims to ensure that potential adverse environmental effects of human activities are assessed before decisions on such activities are made. The instrument is increasingly being applied in

Pulsed Laser Deposition of Polymers Doped with Fluorescent Probes. Application to Environmental Sensors

International Nuclear Information System (INIS)

Rebollar, E; Villavieja, Mm; Gaspard, S; Oujja, M; Corrales, T; Georgiou, S; Domingo, C; Bosch, P; Castillejo, M

2007-01-01

Pulsed laser deposition (PLD) has been used to obtain thin films of poly(methyl methacrylate) and polystyrene doped with fluorescent probes, amino aromatic compounds S5 and S6, that could be used to sense the presence of contaminating environmental agents. These dopants both in solution and inserted in polymeric films are sensitive to changes in pH, viscosity and polarity, increasing their fluorescence emission and/or modifying the position of their emission band. Films deposits on quartz substrates, obtained by irradiating targets with a Ti:Sapphire laser (800 nm, 120 fs pulse) were analyzed by optical and Environmental Scanning Electron Microscopy, Fluorescence Microscopy, Laser-Induced Fluorescence, Micro Raman Spectroscopy and Flow Injection Analysis-Mass Spectrometry. The transfer of the polymer and the probe to the substrate is observed to be strongly dependent on the optical absorption coefficient of the polymeric component of the target at the irradiation wavelength

Methodology of environmental risk assessment management

Directory of Open Access Journals (Sweden)

Saša T. Bakrač

2012-04-01

Full Text Available Successful protection of environment is mostly based on high-quality assessment of potential and present risks. Environmental risk management is a complex process which includes: identification, assessment and control of risk, namely taking measures in order to minimize the risk to an acceptable level. Environmental risk management methodology: In addition to these phases in the management of environmental risk, appropriate measures that affect the reduction of risk occurrence should be implemented: - normative and legal regulations (laws and regulations, - appropriate organizational structures in society, and - establishing quality monitoring of environment. The emphasis is placed on the application of assessment methodologies (three-model concept, as the most important aspect of successful management of environmental risk. Risk assessment methodology - European concept: The first concept of ecological risk assessment methodology is based on the so-called European model-concept. In order to better understand this ecological risk assessment methodology, two concepts - hazard and risk - are introduced. The European concept of environmental risk assessment has the following phases in its implementation: identification of hazard (danger, identification of consequences (if there is hazard, estimate of the scale of consequences, estimate of consequence probability and risk assessment (also called risk characterization. The European concept is often used to assess risk in the environment as a model for addressing the distribution of stressors along the source - path - receptor line. Risk assessment methodology - Canadian concept: The second concept of the methodology of environmental risk assessment is based on the so-called Canadian model-concept. The assessment of ecological risk includes risk arising from natural events (floods, extreme weather conditions, etc., technological processes and products, agents (chemical, biological, radiological, etc

Elemental concentrations in deposited dust on leaves along an urbanization gradient.

Science.gov (United States)

Simon, Edina; Baranyai, Edina; Braun, Mihály; Cserháti, Csaba; Fábián, István; Tóthmérész, Béla

2014-08-15

Environmental health is an essential component of the quality of life in modern societies. Monitoring of environmental quality and the assessment of environmental risks are often species based on the elemental concentration of deposited dust. Our result suggested that stomata size and distribution were the most important factors influencing the accumulation of air contaminants in leaves. We found that the leaves' surfaces of Acer negundo and Celtis occidentalis were covered by a large number of trichomes, and these species have proven to be suitable biomonitors for atmospheric pollution difficult; these can be overcome using bioindicator species. Leaves of Padus serotina, Acer campestre, A. negundo, Quercus robur and C. occidentalis were used to assess the amount of deposited dust and the concentration of contaminants in deposited dust in and around the city of Debrecen, Hungary. Samples were collected from an urban, suburban and rural area along an urbanization gradient. The concentrations of Ba, Cu, Fe, Mn, Ni, Pb, S, Sr and Zn were determined in deposited dust using ICP-OES. Scanning electron microscopy (SEM) was used to explore the morphological structure and dust absorbing capacity of leaves. We found significant differences in dust deposition among species, and dust deposition correlated with trichomes' density. Principal component analysis (PCA) also showed a total separation of tree. Copyright © 2014 Elsevier B.V. All rights reserved.

A New Occurrence Model for National Assessment of Undiscovered Volcanogenic Massive Sulfide Deposits

Science.gov (United States)

Shanks, W.C. Pat; Dusel-Bacon, Cynthia; Koski, Randolph; Morgan, Lisa A.; Mosier, Dan; Piatak, Nadine M.; Ridley, Ian; Seal, Robert R.; Schulz, Klaus J.; Slack, John F.; Thurston, Roland

2009-01-01

Volcanogenic massive sulfide (VMS) deposits are very significant current and historical resources of Cu-Pb-Zn-Au-Ag, are active exploration targets in several areas of the United States and potentially have significant environmental effects. This new USGS VMS deposit model provides a comprehensive review of deposit occurrence and ore genesis, and fully integrates recent advances in the understanding of active seafloor VMS-forming environments, and integrates consideration of geoenvironmental consequences of mining VMS deposits. Because VMS deposits exhibit a broad range of geological and geochemical characteristics, a suitable classification system is required to incorporate these variations into the mineral deposit model. We classify VMS deposits based on compositional variations in volcanic and sedimentary host rocks. The advantage of the classification method is that it provides a closer linkage between tectonic setting and lithostratigraphic assemblages, and an increased predictive capability during field-based studies.

Economic filters for evaluating porphyry copper deposit resource assessments using grade-tonnage deposit models, with examples from the U.S. Geological Survey global mineral resource assessment: Chapter H in Global mineral resource assessment

Science.gov (United States)

Robinson, Gilpin R.; Menzie, W. David

2012-01-01

An analysis of the amount and location of undiscovered mineral resources that are likely to be economically recoverable is important for assessing the long-term adequacy and availability of mineral supplies. This requires an economic evaluation of estimates of undiscovered resources generated by traditional resource assessments (Singer and Menzie, 2010). In this study, simplified engineering cost models were used to estimate the economic fraction of resources contained in undiscovered porphyry copper deposits, predicted in a global assessment of copper resources. The cost models of Camm (1991) were updated with a cost index to reflect increases in mining and milling costs since 1989. The updated cost models were used to perform an economic analysis of undiscovered resources estimated in porphyry copper deposits in six tracts located in North America. The assessment estimated undiscovered porphyry copper deposits within 1 kilometer of the land surface in three depth intervals.

Environmental assessment: challenges and opportunities

International Nuclear Information System (INIS)

Hilbig, J.; Moffett, D.; Beri, K.

2007-01-01

As part of a $4.5 billion investment,Bruce Power is refurbishing Bruce A Units 1 and 2, having successfully completed an environmental assessment to return these units to service after a lay-up of almost 10 years. The project includes implementing a series of refurbishments and upgrades which will enhance safety, increase electricity generation capacity and improve reliability for the 30-year extended life of the units. This paper describes four challenges that were successfully managed during the extensive environmental assessment: (i) defining the scope of the Project; (ii) understanding the EA trigger under the Canadian Environmental Assessment Act; (iii) maintaining an effective relationship with the regulatory agencies; and (iv) managing stakeholder communications. (author)

Environmental assessment: challenges and opportunities

International Nuclear Information System (INIS)

Hilbig, J.; Moffett, D.; Beri, K.

2007-01-01

As part of a $4.5 billion investment, Bruce Power is refurbishing Bruce A Units 1 and 2, having successfully completed an environmental assessment to return these units to service after a lay-up of almost 10 years. The project includes implementing a series of refurbishments and upgrades which will enhance safety, increase electricity generation capacity and improve reliability for the 30-year extended life of the units. This paper describes four challenges that were successfully managed during the extensive environmental assessment: (i) defining the scope of the Project; (ii) understanding the EA trigger under the Canadian Environmental Assessment Act; (iii) maintaining an effective relationship with the regulatory agencies; and (iv) managing stakeholder communications. (author)

Life-Cycle environmental impact assessment of mineral industries

Science.gov (United States)

Hisan Farjana, Shahjadi; Huda, Nazmul; Parvez Mahmud, M. A.

2018-05-01

Mining is the extraction and processing of valuable ferro and non-ferro metals and minerals to be further used in manufacturing industries. Valuable metals and minerals are extracted from the geological deposits and ores deep in the surface through complex manufacturing technologies. The extraction and processing of mining industries involve particle emission to air or water, toxicity to the environment, contamination of water resources, ozone layer depletion and most importantly decay of human health. Despite all these negative impacts towards sustainability, mining industries are working throughout the world to facilitate the employment sector, economy and technological growth. The five most important miners in the world are South Africa, Russia, Australia, Ukraine, Guinea. The mining industries contributes to their GDP significantly. However, the most important issue is making the mining world sustainable thus reducing the emissions. To address the environmental impacts caused by the mining sectors, this paper is going to analyse the environmental impacts caused by the 5 major minerals extraction processes, which are bauxite, ilmenite, iron ore, rutile and uranium by using the life-cycle impact assessment technologies. The analysis is done here using SimaPro software version 8.4 using ReCipe, CML and Australian indicator method.

How strategic environmental assessment can inform lenders about potential environmental risks

DEFF Research Database (Denmark)

Banhalmi-Zakar, Zsuzsa; Larsen, Sanne Vammen

2015-01-01

at a time when it can be used as an input to bank lending decisions, which can assist banks in making lending decisions with better environmental outcomes. For these reasons, we argue that in some circumstances, and particularly for project finance transactions, SEA may be a more useful environmental......In this paper, we explore the potential for strategic environmental assessment (SEA) to be a useful tool for banks to manage environmental risks and inform lending decisions. SEA is an environmental assessment tool that was developed to assist strategic-level decision-makers, such as policy...

Environmental impact assessment: Process and implementation

International Nuclear Information System (INIS)

Chen, S.Y.; Tsai, S.Y.

1989-01-01

In this paper, the procedures and issues regarding the preparation of an environmental impact assessment in accordance with the National Environmental Policy Act (NEPA) as promulgated by the US Congress in 1969 are discussed. NEPA procedures and requirements are covered in general, while particular attention is given to the preparation of the environmental impact assessment. Also included is a discussion of the social impact assessment. The aim of the social impact assessment is to address the social issues involved in enhancing public understanding of the hazardous risks, thereby mitigating any conflicts that may arise in the NEPA process. 3 refs., 1 fig., 1 tab

Quantification of Gaseous Elemental Mercury Dry Deposition to Environmental Surfaces using Mercury Stable Isotopes in a Controlled Environment

Science.gov (United States)

Rutter, A. P.; Schauer, J. J.; Shafer, M. M.; Olson, M.; Robinson, M.; Vanderveer, P.; Creswell, J. E.; Parman, A.; Mallek, J.; Gorski, P.

2009-12-01

Andrew P. Rutter (1) * *, James J, Schauer (1,2) *, Martin M. Shafer(1,2), Michael R. Olson (1), Michael Robinson (1), Peter Vanderveer (3), Joel Creswell (1), Justin L. Mallek (1), Andrew M. Parman (1) (1) Environmental Chemistry and Technology Program, 660 N. Park St, Madison, WI 53705. (2) Wisconsin State Laboratory of Hygiene, 2601 Agriculture Drive, Madison, WI 53718. (3) Biotron, University of Wisconsin - Madison, 2115 Observatory Drive, Madison, WI 53706 * Correspond author(jjschauer@wisc.edu) * *Presenting author (aprutter@wisc.edu) Abstract Gaseous elemental mercury (GEM) is the predominant component of atmospheric mercury outside of arctic depletion events, and locations where anthropogenic point sources are not influencing atmospheric concentrations. GEM constitutes greater than 99% of the mercury mass in most rural and remote locations. While dry and wet deposition of atmospheric mercury is thought to be dominated by oxidized mercury (a.k.a. reactive mercury), only small GEM uptake to environmental surfaces could impact the input of mercury to terrestrial and aquatic ecosystems. Dry deposition and subsequent re-emission of gaseous elemental mercury is a pathway from the atmosphere that remains only partially understood from a mechanistic perspective. In order to properly model GEM dry deposition and re-emission an understanding of its dependence on irradiance, temperature, and relative humidity must be measured and parameterized for a broad spectrum of environmental surfaces colocated with surrogate deposition surfaces used to make field based dry deposition measurements. Measurements of isotopically enriched GEM dry deposition were made with a variety of environmental surfaces in a controlled environment room at the University of Wisconsin Biotron. The experimental set up allowed dry deposition components which are not easily separated in the field to be decoupled. We were able to isolate surface transfer processes from variabilities caused by

Strategic environmental assessment can help solve environmental impact assessment failures in developing countries

International Nuclear Information System (INIS)

Alshuwaikhat, Habib M.

2005-01-01

The current trend of industrialization and urbanization in developing nations has a huge impact on anthropogenic and natural ecosystems. Pollution sources increase with the expansion of cities and cause contamination of water, air and soil. The absence of urban environmental planning and management strategies has resulted in greater concern for future urban development. This paper advocates the adoption of strategic environmental assessment (SEA) as a means to achieve sustainable development in developing countries. It investigates project-level environmental impact assessment (EIA) and its limitations. The exploration of SEA and its features are addressed. The effective implementation of SEA can create a roadmap for sustainable development. In many developing countries, the lack of transparency and accountability and ineffective public participation in the development of the policy, plan and program (PPP) would be mitigated by the SEA process. Moreover, the proactive and broadly based characteristics of SEA would benefit the institutional development of the PPP process, which is rarely experienced in many developing countries. The paper also explores the prospects for SEA and its guiding principles in developing countries. Finally, the paper calls for a coordinated effort between all government, nongovernment and international organizations involved with PPPs to enable developing countries to pursue a path of sustainable development through the development and application of strategic environmental assessment

Environmental Assessment

OpenAIRE

The Inspection Panel

2017-01-01

The Inspection Panel, the World Bank’s independent accountability mechanism, has released the third report in its Emerging Lessons Series. The latest report identifies lessons from Panel cases related to environmental assessment (EA) issues. The Panel is an impartial fact-finding body, independent from the World Bank management and staff, reporting directly to the Board. In response to com...

Environmental impact assessment of fish farm hatcheries ...

African Journals Online (AJOL)

Environmental impact assessment of fish farm hatcheries management in lower ... Environmental impact assessments were taken to determine the causes of ... Of significance of impact assessment were activities like air, traffic, noise, had ...

Radiation environmental impact assessment of copper exploitation

International Nuclear Information System (INIS)

Fan Guang; Wen Zhijian

2010-01-01

The radiation environmental impact of mineral exploitation on the surrounding environment has become a public concern. This paper presents the radiation environmental impact assessment of copper exploitation. Based on the project description and detailed investigations of surrounding environment, systematic radiation environmental impacts have been identified. The environmental impacts are assessed during both construction and operation phase. The environmental protection measures have also been proposed. The related conclusion and measures can play an active role in copper exploitation and environmental protection. (authors)

Methodologies of environmental impact assessment

International Nuclear Information System (INIS)

Schroll, H.

1994-01-01

This article gives a brief introduction covering the objectives of environmental impact assessment (EIA) and sustainable development, before going on to describe the screening procedure to define the environmental and socio-economic impacts of projects. The EIA procedure outlined encompasses a description of the project, examination of all environmental effects (scoping), identification of existing and predicted environmental conditions and impacts, alternative measures and mitigating measures, co-ordination, with environmental regulations, public participation, and monitoring and approval of the EIA. (UK)

16 CFR 260.8 - Environmental assessment.

Science.gov (United States)

2010-01-01

....8 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE USE OF ENVIRONMENTAL MARKETING CLAIMS § 260.8 Environmental assessment. (a) National Environmental Policy... and analysis to determine whether issuing the Guides for the Use of Environmental Marketing Claims...

Framework for conducting environmental assessments of trade negotiations

International Nuclear Information System (INIS)

2001-02-01

This document described the complex task of assessing the environmental impacts of trade negotiations with particular emphasis on the framework of the Strategic Environmental Assessment which the Government of Canada will conduct through a systematic process which can identify and evaluate possible and significant environmental impacts of an initiative. The objective of the assessment is to integrate environmental considerations into decision-making processes at the earliest possible stage. The first part of the framework identifies the importance of recognizing environmental considerations of trade and explains how the framework will contribute to environmental policy. The second part of the framework outlines the process and analytical requirements for conducting an environmental assessment of a trade negotiation. Environmental Assessment Committees will be formed by the Department of Foreign Affairs and International Trade, and will include representatives from federal government departments and agencies. All analyses will be conducted in four stages which will include identifying the economic effect of the negotiation, identifying the likely environmental impact of such changes, assessing the significance of the likely environmental impacts, and identifying enhancement/mitigation options to inform the negotiations. The framework is designed to be flexible enough to be used at current and future trade negotiations in the World Trade Organization, the Free Trade Area of the Americas and in bilateral Free Trade Agreements. An environmental assessment of trade negotiations is considered to be an important decision-making tool for promoting sustainable development. 16 refs., 1 tab

Environmental radioactivity in Caithness and Sutherland. Pt. 1: Food-chain model validation and the attribution of radionuclide sources to deposition

International Nuclear Information System (INIS)

Rose, C.L.; Halliwell, C.M.

1995-01-01

This study is part of a continuing programme investigating the behaviour of environmental radioactivity in the vicinity of the AEA Technology establishment at Dounreay, Caithness and Sutherland. The study aims were to assess the applicability of a National Radiological Protection Board (NRPB) food-chain model to the Caithness and Sutherland area, and to determine the contribution of different radionuclide sources to activities in measured total deposition in the same region. The NRPB model predicts the movement of radionuclides through the food-chain, and in this study was validated by comparing model outputs with measured crop data (ryegrass and clover). Five radionuclides ( 137 Cs, 90 Sr, 239+240 Pu, 238 Pu, 241 Am) were considered. The contribution of different radionuclide sources to activities in total deposition were divided into three categories: Dounreay stack inputs, sea-to-land transfer, and the combined contribution from nuclear weapons testing and Chernobyl fallout. The analyses indicated that the contribution of the Dounreay stack to total deposition was very small for the radionuclides studied. The Chernobyl accident made a large impact on the total deposition of 137 Cs in the study area, and 90 Sr deposition was also affected by this, but to a much lesser extent. The Chernobyl accident appeared to have no effect on total Pu deposition in the region. The cessation of nuclear weapons testing and the length of time since Chernobyl meant that actual 137 Cs and 90 Sr deposition as a result of weapons/Chernobyl inputs had reached a low level by the end of the study period (summer 1987). It became evident that a contribution to total deposition was being made by additional factors, thought to be local resuspension of large particles for 137 Cs, and possibly deposition of plant material for 90 Sr. For Pu, sea-to-land transfer was probably an important contributor at coastal sites. (Author)

Regional Environmental Monitoring and Assessment Program Data (REMAP)

Data.gov (United States)

U.S. Environmental Protection Agency — The Regional Environmental Monitoring and Assessment Program (REMAP) was initiated to test the applicability of the Environmental Monitoring and Assessment Program...

Planning Environmental Impact Assessment Orienting Sustainable Development:Opportunities and Challenges

Institute of Scientific and Technical Information of China (English)

Sun Yanjun; Chen Xingeng; Bao Yun; Peng Xiaochun; Gao Changbo

2005-01-01

Strategic Environmental Assessment is a frontier subject in the field of Environmental Impact Assessment. In the past two decades, especially in recent years, much more importance has been attached to Strategic Environmental Assessment. The Environmental Impact Assessment Law of the P.R.China which was promulgated provides a great opportunity for the development of Planning Environmental Impact Assessment and brings great challenges for the development of traditional Project Environmental Impact Assessment and Planning Environmental Impact Assessment at the same time.In order to promote the implementation of"The EIA Law", the inherent limitations of Project Environmental Impact Assessment must be identified sufficiendy and the theory research and practice of Planning Environmental Impact Assessment should be strengthened as well. Measures should be taken currendy to enforce the operation system. The authors wish to offer a few references to the progress and implementation of Planning Environmental Impact Assessment in China.

Short Term vs Long Term Environmental Reconstruction from Carbonated Deposits of the Limagne Area (Massif Central, France)

Energy Technology Data Exchange (ETDEWEB)

Barbecot, F.; Gibert, E.; Amokrane, Y.; Massault, M.; Noret, A. [Centre National de la Recherche Scientifique Interaction et Dynamique des Environnements de Surface, Universite Paris (France); Ghaleb, B. [Geotop, Universite du Quebec a Montreal, Montreal (Canada)

2013-07-15

A 80 cm sequence has been cored from carbonated travertine in the limagne area (French Massif Central, France) in order to document recent environmental fluctuations (0-100 a) of gaseous springs, in relation to the environmental and geochemical parameters that control the isotopic signatures of modern carbonate deposits. The chronology of these finely laminated deposits that are ideal for reconstructing hydrological conditions at very narrow time steps is determined through AMS-{sup 14}C and {sup 210}Pb/{sup 226}Ra radiometric methods. Preliminary results highlight a high enrichment in stable isotopes (eg up to +8 per mille vs VPDB for {delta}{sup 13}C), likely linked to both recharge temperature and degassing processes. Moreover, two general trends are superimposed: the first one, cyclic, may be correlated to the hydrologic annual/biannual budget while the second one, linear, implies a long term environmental trend. (author)

Environmental flow assessments for transformed estuaries

Science.gov (United States)

Sun, Tao; Zhang, Heyue; Yang, Zhifeng; Yang, Wei

2015-01-01

Here, we propose an approach to environmental flow assessment that considers spatial pattern variations in potential habitats affected by river discharges and tidal currents in estuaries. The approach comprises four steps: identifying and simulating the distributions of critical environmental factors for habitats of typical species in an estuary; mapping of suitable habitats based on spatial distributions of the Habitat Suitability Index (HSI) and adopting the habitat aggregation index to understand fragmentation of potential suitable habitats; defining variations in water requirements for a certain species using trade-off analysis for different protection objectives; and recommending environmental flows in the estuary considering the compatibility and conflict of freshwater requirements for different species. This approach was tested using a case study in the Yellow River Estuary. Recommended environmental flows were determined by incorporating the requirements of four types of species into the assessments. Greater variability in freshwater inflows could be incorporated into the recommended environmental flows considering the adaptation of potential suitable habitats with variations in the flow regime. Environmental flow allocations should be conducted in conjunction with land use conflict management in estuaries. Based on the results presented here, the proposed approach offers flexible assessment of environmental flow for aquatic ecosystems that may be subject to future change.

Radiological impact assessment in Bagjata uranium deposit: a case study

International Nuclear Information System (INIS)

Sarangi, A.K.; Bhowmik, S.C.; Jha, V.N.

2007-01-01

The uranium ore mining facility, in addition to the desirable product, produces wastes in the form of environmental releases or effluents to air, water and soil. The toxicological and other (non-radiological) effects are generally addressed in EIA/EMP studies as per MOEF guidelines. Since the uranium ore is radioactive, it is desirable to conduct a study on radiological effects considering the impacts of radiological releases to the environment. Before undertaking the commercial mining operations at Bagjata uranium deposit in the Singhbhum east district of Jharkhand, pre-operational radiological base line data were generated and a separate study on radiological impact on various environmental matrices was conducted in line with the International Atomic Energy Agency's laid out guidelines. The paper describes the philosophy of such studies and the findings that helped in formulating a separate environmental management plan. (author)

Environmental impact assessment - a selected bibliography

International Nuclear Information System (INIS)

Lawson, W.J.

1989-01-01

This bibliography of literature relevant to the environmental impact assessment process is essentially a list of material dealing with the environmental impact assessment process held by Griffith University Library. The list is however well supplemented with citations of material not held in the Griffith University Library. Some economic and social impact assessment citations have been included in the bibliography, as the the environmental impact assessment concept has been interpreted very broadly. The citations are arranged according to broad subject areas, such as methodology, critical reviews, social impacts etc. Citations in each of these subject areas, which are listed in the table of contents, are identified by prefixes which are given in parentheses before the subjects headings. Within each subject area the citations are arragend in alphabetic author sequence

Environmental Assessment of R&D Programmes

DEFF Research Database (Denmark)

Lyhne, Ivar; Byriel, Inger Pihl

2013-01-01

cause severe negative environmental impacts. This paper presents an innovative environmental assessment practice on R&D programmes in Denmark. It reports on the challenges and experiences of assessing the Danish R&D programme ForskEL, which promotes R&D projects within the electricity sector......Despite their important role in shaping the technologies of the future, public research and development (R&D) programmes are rarely based on systematic assessments of the environmental effects. R&D programmes thus allocate a huge amount of financial resources to projects, which potentially may....... The programme is characterised by uncertainty about impacts and incomparable project types and technologies. A methodology for dealing with these challenges is presented, and experiences from a testing of the methodology on the 2012 programme are reflected upon. Finally the assessment is discussed in terms...

Environmental indicators for epidemiological studies on populations at risk after the Chernobyl accident

International Nuclear Information System (INIS)

Gheorghe, R.; Tulbure, R.; Barbu, R.; Dumitrescu, A.; Toro, L.; Gheorghe, D.; Ciupagea, F.; Galeriu, D.

2006-01-01

The dose is the basic information asked by the physician in the context of a dose effect analysis. Several studies ( in countries of former Soviet Union) on population health revealed an increase in the incidence of some diseases specific to radioactivity ( childhood thyroid cancer), which could be explained by the actual dose estimates. The present paper will focus on the assessment of the effect of 131 iodine contamination in Romania. In conclusion, deposition densities could be proportionally associated with the dose in dry deposition may be considered an adequate environmental indicator. The deposition-dose relationship in an area with a variable rainfall can only be inferred through a radioecological transfer model; such model should be able to translate the particularities of the deposition-dose relationship, and to take into account the dependence of foliar interception and retention on rainfall intensities. Even with these issues of deposition-dose relationship, the assessment of preliminary dose values from deposition patterns is financially quite effortless. Moreover, preliminary doses assessed from regional deposition patterns are very useful for detecting the possible health effects. Thus, the density of deposition should be a good environmental indicator. At the same time, we believe that in the monitoring programmes of the environmental factors much more attention should be given to the wet fraction of the deposition. (N.C.)

Assessing environmental risk of the retired filter bed area, Battelle West Jefferson

International Nuclear Information System (INIS)

Miller, S.F.; Thompson, M.D.; Glennon, M.A.

1997-04-01

Initial investigations conducted by the U.S. Department of Energy, Chicago Operations Office, and by Argonne National Laboratory used seismic refraction profiling, electrical resistivity depth sounding, conductivity profiling, magnetic gradiometry, and ground-penetrating radar to study environmental geophysics in the area of the Battelle West Jefferson site's radiologically contaminated retired filter beds. The investigators used a combination of nonintrusive technologies and innovative drilling techniques to assess environmental risk at the filter beds and to improve understanding of the geology of the Big Darby Creek floodplain. The geophysical investigation, which showed that the preferred groundwater pathway is associated with a laterally extensive deposit of silty sand to sand that is less than 12 ft deep in the floodplain area, also guided the location of cone penetrometer test sites and piezometer installation. Cone penetrometer testing was useful for comparing continuous logging data with surface geophysical data in establishing correlations among unconsolidated materials

Preparation Of Deposited Sediment Sample By Casting Method For Environmental Study

International Nuclear Information System (INIS)

Hutabarat, Tommy; Ristin PI, Evarista

2000-01-01

The preparation of deposited sediment sample by c asting m ethod for environmental study has been carried out. This method comprises separation of size fraction and casting process. The deposited sediment samples were wet sieved to separate the size fraction of >500 mum, (250-500) mum, (125-250) mum and (63-125) mum and settling procedures were followed for the separation of (40-63) mum, (20-40) mum, (10-20) mum and o C, ashed at 450 o C, respectively. In the casting process of sample, it was used polyester rapid cure resin and methyl ethyl ketone peroxide (MEKP) hardener. The moulded sediment sample was poured onto caster, allow for 60 hours long. The aim of this method is to get the casted sample which can be used effectively, efficiently and to be avoided from contamination of each other samples. Before casting, samples were grinded up to be fine. The result shows that casting product is ready to be used for natural radionuclide analysis

Public participation in Malawi's environmental impact assessment ...

African Journals Online (AJOL)

Since the adoption of the Environmental Management Act of 1996, Malawi has been using environmental impact assessment (EIA) as a tool for predicting and assessing the impact of development projects on the environment. This study assessed the extent of public participation in Malawi's EIA process. Desktop study of ...

31 CFR 26.3 - Availability of Environmental Impact Assessment Summaries (EIA Summaries) and Environmental...

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Availability of Environmental Impact Assessment Summaries (EIA Summaries) and Environmental Impact Assessments (EIAs). 26.3 Section 26.3 Money and... DEVELOPMENT BANDS (MDBs) § 26.3 Availability of Environmental Impact Assessment Summaries (EIA Summaries) and...

Environmental Impact Assessment in Antarctica

NARCIS (Netherlands)

Bastmeijer, C.J.; Roura, R.; Bastmeijer, K.; Koivurova, T.

2008-01-01

This publication focuses on the instrument of Environmental Impact Assessment (EIA) that has been developed within the Antarctic Treaty System (ATS) as one of the tools to promote environmental protection. The states involved in the ATS already recognized the importance of this instrument in 1975

Environmental assessment of rosetta area,mediterranean sea coast - egypt

International Nuclear Information System (INIS)

Aly, A.M.A.

2013-01-01

This study is titled (Environmental Assessment of Rosetta Area,Mediterranean Sea Coast, Egypt). The environmental assessment can be defined here as the process of assessing the potential impacts (positive or negative) of the presence of certain influential on a particular ecosystem. Samples were collected from Abu Khashaba beach area, Rosetta on the Mediterranean Sea coast. Samples of the beach sediments, sea-water and the scattered shells in this coastal region were collected. Sediments in this region are characterized by its large content of heavy metals, which added to these sediments its black color. It is known that these black sands occurred along the Mediterranean Sea coast from Alexandria to Rafah. The advantage of these black sand deposits is their contents from multiple economic metals which have important industrial uses, such as magnetite, ilmenite, rutile, monazite, zircon, garnet and other important minerals. Ten sampling profiles spaced in-between by about 600 m distance, and extending into the land from the shoreline for about 50 m or less. Along each profile, three sediment samples were collected; the first sample from the surface at the beach line, the second sample from the end of the foreshore area at a depth of about 50 cm and the third sample was taken from the backshore area at a depth of about 1 m. Extending from each profile into the sea, marine-water samples were taken at a distance of about 3 m from the beach line, and from a depth of about 1 m below the sea surface. The shells samples were collected from the scattered shells on the beach. By examination of these samples a 15 different shells types were defined.

Setting boundaries of participation in environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Salomons, Geoffrey H., E-mail: gsalomon@ualberta.ca [University of Alberta, Department of Political Science, 10-16 Henry Marshall Tory Building, University of Alberta, Edmonton, AB T6G 2H4 (Canada); Hoberg, George, E-mail: george.hoberg@ubc.ca [University of British Columbia, Faculty of Forestry, Forest Sciences Centre 2045, 2424 Main Mall, Vancouver, British Columbia V6T 1Z4 (Canada)

2014-02-15

Public participation processes are touted as an effective way to increase the capacity and legitimacy of environmental assessment and the regulatory process that rely on them. Recent changes to the Canadian environmental assessment process narrowed the criteria for who can participate in environmental assessments from any who were interested to those who were most directly affected. This article examines the potential consequences of this change by exploring other areas of Canadian regulatory law where a similar directed affected test has been applied. This new standard risks institutionalizing the long-understood representational bias confronted by more diffuse interest like environmental protection. Restricting participation to the “directly affected” is far too narrow a test for processes like environmental assessment that are designed to determine the public interest. -- Highlights: • Public participation can improve the legitimacy of environmental assessments. • New Canadian rules narrow the range of eligible participants. • Similar rules in Alberta have excluded environmental representation. • The new rules may institutionalize bias against more diffuse interests. • Restricting participation to the “directly affected” is far too narrow.

Setting boundaries of participation in environmental impact assessment

International Nuclear Information System (INIS)

Salomons, Geoffrey H.; Hoberg, George

2014-01-01

Public participation processes are touted as an effective way to increase the capacity and legitimacy of environmental assessment and the regulatory process that rely on them. Recent changes to the Canadian environmental assessment process narrowed the criteria for who can participate in environmental assessments from any who were interested to those who were most directly affected. This article examines the potential consequences of this change by exploring other areas of Canadian regulatory law where a similar directed affected test has been applied. This new standard risks institutionalizing the long-understood representational bias confronted by more diffuse interest like environmental protection. Restricting participation to the “directly affected” is far too narrow a test for processes like environmental assessment that are designed to determine the public interest. -- Highlights: • Public participation can improve the legitimacy of environmental assessments. • New Canadian rules narrow the range of eligible participants. • Similar rules in Alberta have excluded environmental representation. • The new rules may institutionalize bias against more diffuse interests. • Restricting participation to the “directly affected” is far too narrow

Institutional Assessment of Environmentally Oriented Subsoil Use

Directory of Open Access Journals (Sweden)

Irina Gennadyevna Polyanskaya

2017-06-01

Full Text Available The article solves two relevant problems related to the implementation of the institutional assessment of environmentally oriented subsoil use: 1 the definition of the ‘environmental security’ and 2 the determination of the development level of institutional bases of environmentally oriented subsoil use including the institutional capacity of subsoil use and institutional capacity of environmental security. The article shows an analysis of the existing definitions of “environmental security” and offers the own one. Despite the significant national and foreign experience in the institutional capacity assessment of various processes, there are still some difficulties in defining and measuring the institutional capacity. We eliminate these difficulties by employing 1 original factors, previously identified, and the content of the “institutional capacity” term; 2 quality characteristics for the institutional capacity assessment of the process regulated at the macroeconomic level, and 3 a consistent methodological tool for the institutional assessment of environmentally oriented subsoil use. The study is based on the hypothesis of the necessity of legal and discreet state intervention in the process of subsoil use. Therefore, we identify the evaluation indicator of state regulation in the environmentally oriented subsoil use as the institutional capacity level calculated by using the fuzzy-set theory. As a result, the institutional capacity levels of the environmentally oriented subsoil use have been defined for both the transport corridor «Arctic-Central Asia» and for the countries composing it. The obtained values of the assessment of institutional capacity levels of the environmentally oriented subsoil use can serve as a basis for identifying the vector of its increase

A Study on improvement of environmental assessment system in social, economic, and environmental sectors

Energy Technology Data Exchange (ETDEWEB)

Nam, Young Sook; Koo, Doh Wan; Keum, Kee Yong [Korea Environment Institute, Seoul (Korea)

1998-12-01

The environmental assessment system is assessed as a mechanism that can achieve the goal for environmental policy in 21st century. As it can evaluate social and economic feasibility of large-scale development program, this system can achieve a sustainable society by mitigating social conflicts arising from environmental problems. For making the environmental assessment system substantial, this study was implemented by the need of improvement of the system, by analyzing problems of social, economic, and environmental evaluation, which is implemented under the present system. 44 refs., 1 fig., 25 tabs.

Preliminary environmental site assessments in New York City

International Nuclear Information System (INIS)

Lundy, P.; Gasson, D.R.; Longendyke, S.T.

1991-01-01

Preliminary Environmental Site Assessments are often performed prior to real estate transactions or refinancing. These assessments are typically performed for real estate buyers, sellers and lending institutions. Undertaking a Preliminary Environmental Site Assessment in New York City can often be quite complex and time-consuming. This is due, in part, to the age and density of buildings in the city as well as the myriad of regulatory agencies with jurisdiction over environmental issues. This paper will discuss how environmental assessments are performed with a special emphasis on building in New York City. In includes hazardous wastes management for Radon, PCB's and asbestos

Environmental Impact Assessment and Space Activities

Science.gov (United States)

Viikari, L.

Environmental Impact Assessment (EIA) is a common tool for environment a l protection and management on Earth today, as prior assessment of the environmental consequences of planned activities. It is meant to provide the decision-makers with as comprehensive as possible information about the different environmental effects the proposed activity would entail, including alternative courses of action and the zero-alternative (i.e. the no action alternative). Additionally, plans for mitigation in respect of each alternative are to be outlined. The assessments take account of i.a. environmental impacts on ecosystems, diminution of aesthetic and scientific values, long-term or cumulative effects, as well as transfrontier implications. They also consider issues such as pollution control, environmental protection measures, reporting, post-project analysis, rehabilitation and so on. Also uncertainties in the assessment process are to be expressly presented. Most importantly, a common requirement also is that the results of the impact studies are presented in a way comprehensible to the g neral public,e too. Although the central aspect of the EIA is to provide the decision-makers with scientific information, the process also has other important implications. One of the most relevant of them is the involvement of those people potentially affected in some way by the proposed activity: most EIA systems require in some way the participation of the public, alongside with the relevant governmental authorities and other stake-holders. Such public involvement has various aims and goals: it may serve as a testimony to good governance in general, or be considered in more practical terms as improved planning, due to the concrete contribution of the public to the decision-making process. Obviously, it also is a tool for reducing conflict and developing wider support for the eventual decisions. In short, it enables the public to gain information about planned activities and influence

Predictions of models for environmental radiological assessment

International Nuclear Information System (INIS)

Peres, Sueli da Silva; Lauria, Dejanira da Costa; Mahler, Claudio Fernando

2011-01-01

In the field of environmental impact assessment, models are used for estimating source term, environmental dispersion and transfer of radionuclides, exposure pathway, radiation dose and the risk for human beings Although it is recognized that the specific information of local data are important to improve the quality of the dose assessment results, in fact obtaining it can be very difficult and expensive. Sources of uncertainties are numerous, among which we can cite: the subjectivity of modelers, exposure scenarios and pathways, used codes and general parameters. The various models available utilize different mathematical approaches with different complexities that can result in different predictions. Thus, for the same inputs different models can produce very different outputs. This paper presents briefly the main advances in the field of environmental radiological assessment that aim to improve the reliability of the models used in the assessment of environmental radiological impact. The intercomparison exercise of model supplied incompatible results for 137 Cs and 60 Co, enhancing the need for developing reference methodologies for environmental radiological assessment that allow to confront dose estimations in a common comparison base. The results of the intercomparison exercise are present briefly. (author)

36 CFR 220.7 - Environmental assessment and decision notice.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Environmental assessment and decision notice. 220.7 Section 220.7 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) COMPLIANCE § 220.7 Environmental assessment and decision notice. (a) Environmental assessment...

Comparison of four bioindication methods for assessing the degree of environmental lead and cadmium pollution.

Science.gov (United States)

Dmuchowski, Wojciech; Gozdowski, Dariusz; Baczewska, Aneta Helena

2011-12-15

The purpose of this study was to assess the application of several bioindication methods for the monitoring of environmental pollution from Pb and Cd. The study area centered on the town of Olkusz, Poland, which is one of the oldest centers for the metallurgical industry in Europe. The assessment of environmental pollution due to metals was performed using four frequently used bioindication methods: moss-bag (Sphagnum fallax), determination of metal accumulation in Pleurozium schreberi, silver birch foliage, and Scots pine needles. The region of Olkusz, and especially the area surrounding the mining and metallurgical Bolesław complex, was extremely contaminated with Pb and Cd. The results of the investigations are presented as contamination deposition maps. Despite the application of various methods and the resulting diversity of the specific exposure periods for different biomonitors, the spatial distribution of contamination shown on the maps was similar, as confirmed by the statistical analysis of the results. Copyright © 2011 Elsevier B.V. All rights reserved.

Integrated Environmental Assessment Part III: ExposureAssessment

Energy Technology Data Exchange (ETDEWEB)

McKone, Thomas E.; Small, Mitchell J.

2006-06-01

Human exposure assessment is a key step in estimating the environmental and public health burdens that result chemical emissions in the life cycle of an industrial product or service. This column presents the third in a series of overviews of the state of the art in integrated environmental assessment - earlier columns described emissions estimation (Frey and Small, 2003) and fate and transport modeling (Ramaswami, et al., 2004). When combined, these first two assessment elements provide estimates of ambient concentrations in the environment. Here we discuss how both models and measurements are used to translate ambient concentrations into metrics of human and ecological exposure, the necessary precursors to impact assessment. Exposure assessment is the process of measuring and/or modeling the magnitude, frequency and duration of contact between a potentially harmful agent and a target population, including the size and characteristics of that population (IPCS, 2001; Zartarian, et al., 2005). Ideally the exposure assessment process should characterize the sources, routes, pathways, and uncertainties in the assessment. Route of exposure refers to the way that an agent enters the receptor during an exposure event. Humans contact pollutants through three routes--inhalation, ingestion, and dermal uptake. Inhalation occurs in both outdoor environments and indoor environments where most people spend the majority of their time. Ingestion includes both water and food, as well as soil and dust uptake due to hand-to-mouth activity. Dermal uptake occurs through contacts with consumer products; indoor and outdoor surfaces; the water supply during washing or bathing; ambient surface waters during swimming or boating; soil during activities such as work, gardening, and play; and, to a lesser extent, from the air that surrounds us. An exposure pathway is the course that a pollutant takes from an ambient environmental medium (air, soil, water, biota, etc), to an exposure medium

76 FR 44891 - Monsanto Co.; Availability of Petition, Plant Pest Risk Assessment, and Environmental Assessment...

Science.gov (United States)

2011-07-27

...] Monsanto Co.; Availability of Petition, Plant Pest Risk Assessment, and Environmental Assessment for... Monsanto petition, our plant pest risk assessment, and our draft environmental assessment for the proposed...-2817 before coming. The petition, draft environmental assessment, and plant pest risk assessment are...

Elemental concentrations in deposited dust on leaves along an urbanization gradient

Energy Technology Data Exchange (ETDEWEB)

Simon, Edina, E-mail: edina.simon@gmail.com [Department of Ecology, University of Debrecen, H-4010 Debrecen, P.O. Box 71 (Hungary); Baranyai, Edina [Department of Inorganic and Analytical Chemistry, University of Debrecen, H-4010 Debrecen, P.O. Box 21 (Hungary); Agilent Atomic Spectroscopy Partner Laboratory, University of Debrecen, Egyetem tér 1, H-4032 Debrecen (Hungary); Braun, Mihály [Institute of Nuclear Research of the Hungarian Academy of Sciences, Herteleni Laboratory of Environmental Studies, 4026 Debrecen, Bem tér 18/C (Hungary); Cserháti, Csaba [Department of Solid State Physics, University of Debrecen, H-4010 Debrecen, P.O. Box 2 (Hungary); Fábián, István [Department of Inorganic and Analytical Chemistry, University of Debrecen, H-4010 Debrecen, P.O. Box 21 (Hungary); Tóthmérész, Béla [HAS-UD Biodiversity and Ecosystem Services Research Group, H-4010 Debrecen, P.O. Box 71 (Hungary)

2014-08-15

Environmental health is an essential component of the quality of life in modern societies. Monitoring of environmental quality and the assessment of environmental risks are often species based on the elemental concentration of deposited dust. Our result suggested that stomata size and distribution were the most important factors influencing the accumulation of air contaminants in leaves. We found that the leaves' surfaces of Acer negundo and Celtis occidentalis were covered by a large number of trichomes, and these species have proven to be suitable biomonitors for atmospheric pollution difficult; these can be overcome using bioindicator species. Leaves of Padus serotina, Acer campestre, A. negundo, Quercus robur and C. occidentalis were used to assess the amount of deposited dust and the concentration of contaminants in deposited dust in and around the city of Debrecen, Hungary. Samples were collected from an urban, suburban and rural area along an urbanization gradient. The concentrations of Ba, Cu, Fe, Mn, Ni, Pb, S, Sr and Zn were determined in deposited dust using ICP–OES. Scanning electron microscopy (SEM) was used to explore the morphological structure and dust absorbing capacity of leaves. We found significant differences in dust deposition among species, and dust deposition correlated with trichomes' density. Principal component analysis (PCA) also showed a total separation of tree. - Highlights: • Dust is used as indicators of the accumulation of inorganic pollutants. • Scanning EM was used to explore the morphological structure of leaves. • Amount of dust deposited of leaves correlated with trichomes' density. • A. negundo, C. occidentalis and Q. robur are suitable to indicate air contaminants. • A. negundo and C. occidentalis are suitable to decrease the amount of dust in air.

Elemental concentrations in deposited dust on leaves along an urbanization gradient

International Nuclear Information System (INIS)

Simon, Edina; Baranyai, Edina; Braun, Mihály; Cserháti, Csaba; Fábián, István; Tóthmérész, Béla

2014-01-01

Environmental health is an essential component of the quality of life in modern societies. Monitoring of environmental quality and the assessment of environmental risks are often species based on the elemental concentration of deposited dust. Our result suggested that stomata size and distribution were the most important factors influencing the accumulation of air contaminants in leaves. We found that the leaves' surfaces of Acer negundo and Celtis occidentalis were covered by a large number of trichomes, and these species have proven to be suitable biomonitors for atmospheric pollution difficult; these can be overcome using bioindicator species. Leaves of Padus serotina, Acer campestre, A. negundo, Quercus robur and C. occidentalis were used to assess the amount of deposited dust and the concentration of contaminants in deposited dust in and around the city of Debrecen, Hungary. Samples were collected from an urban, suburban and rural area along an urbanization gradient. The concentrations of Ba, Cu, Fe, Mn, Ni, Pb, S, Sr and Zn were determined in deposited dust using ICP–OES. Scanning electron microscopy (SEM) was used to explore the morphological structure and dust absorbing capacity of leaves. We found significant differences in dust deposition among species, and dust deposition correlated with trichomes' density. Principal component analysis (PCA) also showed a total separation of tree. - Highlights: • Dust is used as indicators of the accumulation of inorganic pollutants. • Scanning EM was used to explore the morphological structure of leaves. • Amount of dust deposited of leaves correlated with trichomes' density. • A. negundo, C. occidentalis and Q. robur are suitable to indicate air contaminants. • A. negundo and C. occidentalis are suitable to decrease the amount of dust in air

Theory and Practice of Transboundary Environmental Impact Assessment

NARCIS (Netherlands)

Bastmeijer, C.J.; Koivurova, T.

2008-01-01

Environmental Impact Assessment (EIA) is a well-established instrument of environmental law and policy that aims to ensure that potential adverse environmental effects of human activities are assessed before decisions on such activities are made. The instrument is increasingly being applied in

Comparative study for environmental assessment by program characters

Energy Technology Data Exchange (ETDEWEB)

Kim, Suk Chul; Lee, Young Soo; Park, Young Min; Park, Suk Soon; Chung, Kyung Tae; Cho, Hong Yun; Chae, Jang Won; Lee, Sang Don; Lee, Chan Ho; Choi, Joon Kyu; Kim, Kang Joo; Chung, Won Moo; Jin, Jae Yool [Korea Environment Institute, Seoul (Korea)

1998-12-01

The level of environmental assessment in Korea was diagnosed by examining the situation of its model for the entire environmental assessment implemented. Also, it proposed an improvement scheme for its problems to be able to advance. It is expected to be utilized as developing optimum model for Korea and establishing a systematic and concrete guideline for environmental assessment modeling. 244 refs., 65 figs., 28 tabs.

Environmental Tools and Radiological Assessment

Science.gov (United States)

This presentation details two tools (SADA and FRAMES) available for use in environmental assessments of chemicals that can also be used for radiological assessments of the environment. Spatial Analysis and Decision Assistance (SADA) is a Windows freeware program that incorporate...

Relation of Environmental Impact Assessment (EIA and Strategic Environmental Assessment (SEA and the Importance of Strategic Environmental Assessment in Landscape Planning Process

Directory of Open Access Journals (Sweden)

Gizem CENGİZ GÖKÇE

2015-07-01

Full Text Available The main goal in the countries which have not completed their development progress is industrialization and development just as soon as possible. Therefore, negative effects of industrialization and development on envi ronment and/or nature cannot be mostly discussed adequately. One of the planning approach instruments that targets sustainability, Environmental Impact Assessment (EIA is used in many countries effectively. But in recent years, that has understood; EIA is an impact assessment instrument that contains defensive preventions only on the basis of projects and this situation has caused some concerns against EIA. In this direction, Strategical Environmental Assessment (SEA exists as the final point of the instruments which are formed to provide sustainable development . In this study; the importance and the requirement of effectively taking a role of landscape architectures that have ecological based job, in the SEA workings which isn’t have got a legal status in Turkey yet, are emphasized by reviewing the relations between EIA and SEA concepts.

Integrated environmental and economic assessment of waste management systems

DEFF Research Database (Denmark)

Martinez Sanchez, Veronica

in the “Optimization approach” the scenarios are the results of an optimization process. • The cost approach describes cost principles and level of LCA integration. Conventional and Environmental LCCs are financial assessments, i.e. include marketed goods/services, but while Environmental LCCs include environmental...... assessment of SWM systems alongside environmental impacts assessment to take budget constrains into account. In light of the need for combined environmental and economic assessment of SWM, this PhD thesis developed a consistent and comprehensive method for integrated environmental and economic assessment...... of SWM technologies and systems. The method resulted from developing further the generic Life Cycle Costing (LCC) framework suggested by Hunkeler et al. (2008) and Swarr et al. (2011) to apply it on the field of SWM. The method developed includes: two modelling approaches (Accounting and Optimization...

Building better environmental risk assessments

Directory of Open Access Journals (Sweden)

Raymond eLayton

2015-08-01

Full Text Available Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERA for genetically modified (GM crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems – examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data, and adapting advances in risk analysis from other relevant disciplines.

Building Better Environmental Risk Assessments

Science.gov (United States)

Layton, Raymond; Smith, Joe; Macdonald, Phil; Letchumanan, Ramatha; Keese, Paul; Lema, Martin

2015-01-01

Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision-making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERAs) for genetically modified (GM) crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems – examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data), and adapting advances in risk analysis from other relevant disciplines. PMID:26301217

Building Better Environmental Risk Assessments.

Science.gov (United States)

Layton, Raymond; Smith, Joe; Macdonald, Phil; Letchumanan, Ramatha; Keese, Paul; Lema, Martin

2015-01-01

Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision-making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERAs) for genetically modified (GM) crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems - examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data), and adapting advances in risk analysis from other relevant disciplines.

An investigation for the economic assessment of uranium deposits and mining projects

International Nuclear Information System (INIS)

Alnajim, N.

1980-01-01

It is the aim of this thesis to supply a comprehensive basis for decisions to be made in connection with the detection, exploration, extraction processing and marketing of uranium. The deposit types and forms, the technologies of exploration, extraction and processing as well as the most economic procedure for the exploitation of such deposits are presented in detail. This results in an assessment system which serves to consider the necessity for the construction of uranium ore deposits. (orig./HP) [de

Discussion of some issues in assessing nuclear and radiation environmental impacts and in related assessment

International Nuclear Information System (INIS)

Pan Ziqiang

1998-01-01

The author discusses some noticeable issues in drafting assessment report of nuclear and radiation environmental impacts and relevant aspects needed to be considered from the point of view of comprehensive environmental assessment. The considerable issue are principles of radioactive waste management, optimization of radiation protection and collective dose, and uncertainty of the assessment. Implementing reporting system on assessment of nuclear and radiation environmental impacts would improve environmental protection for nuclear and radiation facilities. However, trade's, regional , country and global assessment of environmental impacts has to be enhanced. For this purpose, it is necessary to develop methodology of qualitative and quantitative comprehensive assessment

Environmental assessment of wood domestic heating. Synthetic report

International Nuclear Information System (INIS)

2005-12-01

This report proposes a synthesis of the results of an environmental assessment of wood domestic heating. This study is based on a life cycle analysis which quantifies the impacts on the environment of all the related activities: fuel extraction, retailing, final use, and so on. Environmental impacts are assessed by means of different indicators: energetic assessment, greenhouse effect assessment, air pollution (acidification), water pollution (eutrophication), toxic material emissions in air and into the soils. Wood is compared to other heating sources (gas, fuel, electricity). Ways to improve this environmental assessment are discussed for the different types of wood (logs, pellets)

Quantitative Assessment of Spray Deposition with Water-Sensitive Paper

Science.gov (United States)

Spray droplets, discharged from the lower six nozzles of an airblast sprayer, were sampled on pairs of absorbent filter and water-sensitive papers at nine distances from sprayer. Spray deposition on filter targets were measured by fluorometry and spray distribution on WSP targets were assessed by t...

Definition and Reliability Assessment of Elementary Ultrasonographic Findings in Calcium Pyrophosphate Deposition Disease

DEFF Research Database (Denmark)

Filippou, Georgios; Scirè, Carlo A; Damjanov, Nemanja

2017-01-01

OBJECTIVE: To define the ultrasonographic characteristics of calcium pyrophosphate crystal (CPP) deposits in joints and periarticular tissues and to evaluate the intra- and interobserver reliability of expert ultrasonographers in the assessment of CPP deposition disease (CPPD) according to the ne...

Simulation of 7Be monthly depositions using normally available data on environmental monitoring and local meteorology

International Nuclear Information System (INIS)

Sakashita, Tetsuya; Nakamura, Yuji; Doi, Masahiro

2003-01-01

Monthly depositions of Beryllium-7 were simulated using normally available data on environmental monitoring and local meteorology over a 5-year period, from 1986 to 1990. The washout scheme of ApSimon et al., the constant dry deposition velocity (0.002 ms -1 ), and the rainout scheme of Kasibhatla et al. (K scheme) were used for simulation. Seasonal variations in the observed depositions were relatively well simulated by the present parameterization, however, there was a tendency for simulations to exceed the observed values, when heavy rain was measured. The revised parameterization of rainout scheme was introduced and improved the overestimation. The result may suggest that aerosols containing 7 Be are removed at a relatively high rate from the formation area of raindrops. (author)

Environmental risk assessment system for phosphogypsum tailing dams.

Science.gov (United States)

Sun, Xin; Ning, Ping; Tang, Xiaolong; Yi, Honghong; Li, Kai; Zhou, Lianbi; Xu, Xianmang

2013-01-01

This paper may be of particular interest to the readers as it provides a new environmental risk assessment system for phosphogypsum tailing dams. In this paper, we studied the phosphogypsum tailing dams which include characteristics of the pollution source, environmental risk characteristics and evaluation requirements to identify the applicable environmental risk assessment methods. Two analytical methods, that is, the analytic hierarchy process (AHP) and fuzzy logic, were used to handle the complexity of the environmental and nonquantitative data. Using our assessment method, different risk factors can be ranked according to their contributions to the environmental risk, thereby allowing the calculation of their relative priorities during decision making. Thus, environmental decision-makers can use this approach to develop alternative management strategies for proposed, ongoing, and completed PG tailing dams.

Ecological risk assessment as a framework for environmental impact assessments

CSIR Research Space (South Africa)

Claassen, Marius

1999-01-01

Full Text Available Environmental impact assessments in South Africa are usually conducted according to the integrated environmental management (IEM) procedure. The preliminary investigation reported here, indicated that most of the ecological requirements specified...

Volcanogenic Uranium Deposits: Geology, Geochemical Processes, and Criteria for Resource Assessment

Science.gov (United States)

Nash, J. Thomas

2010-01-01

Felsic volcanic rocks have long been considered a primary source of uranium for many kinds of uranium deposits, but volcanogenic uranium deposits themselves have generally not been important resources. Until the past few years, resource summaries for the United States or the world generally include volcanogenic in the broad category of 'other deposits' because they comprised less than 0.5 percent of past production or estimated resources. Exploration in the United States from the 1940s through 1982 discovered hundreds of prospects in volcanic rocks, of which fewer than 20 had some recorded production. Intensive exploration in the late 1970s found some large deposits, but low grades (less than about 0.10 percent U3O8) discouraged economic development. A few deposits in the world, drilled in the 1980s and 1990s, are now known to contain large resources (>20,000 tonnes U3O8). However, research on ore-forming processes and exploration for volcanogenic deposits has lagged behind other kinds of uranium deposits and has not utilized advances in understanding of geology, geochemistry, and paleohydrology of ore deposits in general and epithermal deposits in particular. This review outlines new ways to explore and assess for volcanogenic deposits, using new concepts of convection, fluid mixing, and high heat flow to mobilize uranium from volcanic source rocks and form deposits that are postulated to be large. Much can also be learned from studies of epithermal metal deposits, such as the important roles of extensional tectonics, bimodal volcanism, and fracture-flow systems related to resurgent calderas. Regional resource assessment is helped by genetic concepts, but hampered by limited information on frontier areas and undiscovered districts. Diagnostic data used to define ore deposit genesis, such as stable isotopic data, are rarely available for frontier areas. A volcanic environment classification, with three classes (proximal, distal, and pre-volcanic structures

Oasis deposits in the southern margin of the Taklimakan Desert and abrupt environmental changes during the last 30 ka

Science.gov (United States)

Shu, P.; Li, B.; Wang, H.; Cheng, P.; An, Z.; Zhou, W.; Zhang, D. D.

2017-12-01

Taklimakan Desert, the largest arid landform in the Eurasia, is one of the most important dust sources in the world. Growing evidences shows that millennial-scale abrupt climate changes during the last glacial period in the region. However, records on millennial-scale climate and environmental changes remain poorly understood because dating eolian, lacustrine, and fluvial sediments and establishing the reliable environmental proxies from these records are always challenging. Here, we present 32 AMS 14C dates of bulk sediments, grain size, and Rb/Sr ratio parameters from the oasis sequence and dates of bulk loess and charcoal from the upstream source regions to examine the significance of oasis sediments on millennial-scale environmental changes in the Taklimakan Desert. We found that substantial reversal of radiocarbon dates on total organic carbon (TOC) was controlled by source region organic carbon input. Loess hills, alpine meadow north of the study region provided fluvial deposits along drainage system and deflation in the river valleys further provide eolain materials. We argue that early oasis deposits experienced deflation and re-deposition less severe than the younger oasis deposits. After refining radiocarbon age-depth relationships for an age model by Bacon package, proxy records show substantial abrupt fluctuations in climate and environments during the last glacial period, among which three wet intervals, two dry periods are identified. The wetter and warmer conditions during the Holocene facilitated human to occupy the oasis.

Environmental Measurements Laboratory. Environmental report, September 1, 1980-March 1, 1981

International Nuclear Information System (INIS)

Hardy, E.P. Jr.

1981-01-01

This report presents current information from the EML environmental programs, the Air Monitoring Section of the Bhabha Atomic Research Centre in India, the NASA Lewis Research Center and the Radiological and Environmental Research Division at Argonne National Laboratory. The initial section consists of interpretive reports and notes dealing with global movement of radioactive debris from nuclear tests, vertical distribution of short-lived radionuclides in the lower stratosphere at the end of 1980, stratospheric radionuclide and trace gas inventories, plutonium isotopes in stratospheric filtered air, sulfur dioxide measurements in New York City, estimates of lead, manganese, aluminum and iron in atmospheric deposition at American Samoa, chemical composition of deposition at seven US locations, intercomparison of trace element analyses of commercially available reference materials, evaluation of analytical methods for polycyclic aromatic hydrocarbons in sediment, and quality control assessments of radionuclide analyses of surface air filters, biological and deposition samples and of chemical analyses of precipitation. Subsequent sections include tabulations of Sr-90 fallout, chemical constituents of wet and dry deposition, radionuclides and trace metals in surface air, radioactivity and trace gases sampled in the stratosphere by aircraft and balloons, Sr-90 in San Francisco and New York diet, milk and tap water, and Cs-137 in Chicago foods. A bibliography of recent publications related to environmental studies is also presented

Assessment of risks of loose landslide deposits formed by the 2008 Wenchuan earthquake

Science.gov (United States)

Zhang, S.; Zhang, L. M.; Peng, M.; Zhang, L. L.; Zhao, H. F.; Chen, H. X.

2012-05-01

A Geographic Information System (GIS)-based quantitative risk assessment methodology was adopted to evaluate the risks of loose deposits formed by the 2008 Wenchuan earthquake along a highway near the epicenter. A total of 305 loose deposits with a total volume of 4.0 × 107 m3 has been identified. A physical model was used to determine the failure probability of these loose deposits under six rainfall scenarios, assuming the loose deposits as infinite slopes. The calculated probability of rain-induced slope failures is verified by the recorded landslides at the same site during a storm in 2010. Seventy-nine out of the 112 rain-induced loose deposit failures are predicted by the reliability analysis, with an accuracy of 71%. The results of reliability analysis and information on the consequence of these rain-induced landslides enable the estimation of the annual societal and individual risks of the loose deposits. Under the rainfall scenarios of 30 mm/12 h and 70 mm/12 h, the estimated annual societal risks reach 8.8 and 7.5, respectively, and the individual risks reach 0.05 and 0.04, respectively, which are very high compared with present risk acceptance criteria. The preliminary assessment provides a benchmark for studying the long-term risks of these loose deposits and engineering decision.

75 FR 78994 - Notice of Intent To Prepare an Environmental Assessment, Request for Comments on Environmental...

Science.gov (United States)

2010-12-17

... Prepare an Environmental Assessment, Request for Comments on Environmental Issues, and Notice of Public...: Notice of intent to prepare an Environmental Assessment, request for comments on Environmental Issues... and/or special expertise with respect to environmental issues to formally cooperate with GSA in the...

Environmental impact assessment in the Nordic Countries

International Nuclear Information System (INIS)

Broden, K.; Palsson, S.E.; Poroddsson, P.

2000-12-01

A meeting on Environmental Impact Assessment has been held in Iceland, September 2-6, 2000. It was held within the framework of the project NKS/SOS-3 (Radioactive waste), subproject NKS/SOS-3.1 (Environmental Impact Assessment). The meeting included presentations, discussions and a study trip to the Egilsstadir and Myvatn districts. (au)

Spatial assessment of Geo-environmental data by the integration of Remote Sensing and GIS techniques for Sitakund Region, Eastern foldbelt, Bangladesh.

Science.gov (United States)

Gazi, M. Y.; Rahman, M.; Islam, M. A.; Kabir, S. M. M.

2016-12-01

Techniques of remote sensing and geographic information systems (GIS) have been applied for the analysis and interpretation of the Geo-environmental assessment to Sitakund area, located within the administrative boundaries of the Chittagong district, Bangladesh. Landsat ETM+ image with a ground resolution of 30-meter and Digital Elevation Model (DEM) has been adopted in this study in order to produce a set of thematic maps. The diversity of the terrain characteristics had a major role in the diversity of recipes and types of soils that are based on the geological structure, also helped to diversity in land cover and use in the region. The geological situation has affected on the general landscape of the study area. The problem of research lies in the possibility of the estimating the techniques of remote sensing and geographic information systems in the evaluation of the natural data for the study area spatially as well as determine the appropriate in grades for the appearance of the ground and in line with the reality of the region. Software for remote sensing and geographic information systems were adopted in the analysis, classification and interpretation of the prepared thematic maps in order to get to the building of the Geo-environmental assessment map of the study area. Low risk geo-environmental land mostly covered area of Quaternary deposits especially with area of slope wash deposits carried by streams. Medium and high risk geo-environmental land distributed with area of other formation with the study area, mostly the high risk shows area of folds and faults. The study has assessed the suitability of lands for agricultural purpose and settlements in less vulnerable areas within this region.

Road ecology in environmental impact assessment

International Nuclear Information System (INIS)

Karlson, Mårten; Mörtberg, Ulla; Balfors, Berit

2014-01-01

Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

Road ecology in environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Karlson, Mårten, E-mail: mkarlso@kth.se; Mörtberg, Ulla, E-mail: mortberg@kth.se; Balfors, Berit, E-mail: balfors@kth.se

2014-09-15

Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

Photosynthesis and oxidative stress in the restinga plant species Eugenia uniflora L. exposed to simulated acid rain and iron ore dust deposition: Potential use in environmental risk assessment

Energy Technology Data Exchange (ETDEWEB)

Rust Neves, Natalia; Oliva, Marco Antonio; Cruz Centeno, Danilo da; Costa, Alan Carlos; Ferreira Ribas, Rogerio [Departamento de Biologia Vegetal, Universidade Federal de Vicosa, Av. PH Rolfs, Campus, Vicosa, Minas Gerais, 36570-000 (Brazil); Gusmao Pereira, Eduardo, E-mail: egpereira@gmail.com [Departamento de Biologia Vegetal, Universidade Federal de Vicosa, Av. PH Rolfs, Campus, Vicosa, Minas Gerais, 36570-000 (Brazil)

2009-06-01

The Brazilian sandy coastal plain named restinga is frequently subjected to particulate and gaseous emissions from iron ore factories. These gases may come into contact with atmospheric moisture and produce acid rain. The effects of the acid rain on vegetation, combined with iron excess in the soil, can lead to the disappearance of sensitive species and decrease restinga biodiversity. The effects of iron ore dust deposition and simulated acid rain on photosynthesis and on antioxidant enzymes were investigated in Eugenia uniflora, a representative shrub species of the restinga. This study aimed to determine the possible utility of this species in environmental risk assessment. After the application of iron ore dust as iron solid particulate matter (SPM{sub Fe}) and simulated acid rain (pH 3.1), the 18-month old plants displayed brown spots and necrosis, typical symptoms of iron toxicity and injuries caused by acid rain, respectively. The acidity of the rain intensified leaf iron accumulation, which reached phytotoxic levels, mainly in plants exposed to iron ore dust. These plants showed the lowest values for net photosynthesis, stomatal conductance, transpiration, chlorophyll a content and electron transport rate through photosystem II (PSII). Catalase and superoxide dismutase activities were decreased by simulated acid rain. Peroxidase activity and membrane injury increased following exposure to acid rain and simultaneous SPM{sub Fe} application. Eugenia uniflora exhibited impaired photosynthetic and antioxidative metabolism in response to combined iron and acid rain stresses. This species could become a valuable tool in environmental risk assessment in restinga areas near iron ore pelletizing factories. Non-invasive evaluations of visual injuries, photosynthesis and chlorophyll a fluorescence, as well as invasive biochemical analysis could be used as markers.

Photosynthesis and oxidative stress in the restinga plant species Eugenia uniflora L. exposed to simulated acid rain and iron ore dust deposition: Potential use in environmental risk assessment

International Nuclear Information System (INIS)

Rust Neves, Natalia; Oliva, Marco Antonio; Cruz Centeno, Danilo da; Costa, Alan Carlos; Ferreira Ribas, Rogerio; Gusmao Pereira, Eduardo

2009-01-01

The Brazilian sandy coastal plain named restinga is frequently subjected to particulate and gaseous emissions from iron ore factories. These gases may come into contact with atmospheric moisture and produce acid rain. The effects of the acid rain on vegetation, combined with iron excess in the soil, can lead to the disappearance of sensitive species and decrease restinga biodiversity. The effects of iron ore dust deposition and simulated acid rain on photosynthesis and on antioxidant enzymes were investigated in Eugenia uniflora, a representative shrub species of the restinga. This study aimed to determine the possible utility of this species in environmental risk assessment. After the application of iron ore dust as iron solid particulate matter (SPM Fe ) and simulated acid rain (pH 3.1), the 18-month old plants displayed brown spots and necrosis, typical symptoms of iron toxicity and injuries caused by acid rain, respectively. The acidity of the rain intensified leaf iron accumulation, which reached phytotoxic levels, mainly in plants exposed to iron ore dust. These plants showed the lowest values for net photosynthesis, stomatal conductance, transpiration, chlorophyll a content and electron transport rate through photosystem II (PSII). Catalase and superoxide dismutase activities were decreased by simulated acid rain. Peroxidase activity and membrane injury increased following exposure to acid rain and simultaneous SPM Fe application. Eugenia uniflora exhibited impaired photosynthetic and antioxidative metabolism in response to combined iron and acid rain stresses. This species could become a valuable tool in environmental risk assessment in restinga areas near iron ore pelletizing factories. Non-invasive evaluations of visual injuries, photosynthesis and chlorophyll a fluorescence, as well as invasive biochemical analysis could be used as markers.

Technology needs assessment for DOE environmental restoration programs

International Nuclear Information System (INIS)

Duray, J.R.; Carlson, T.J.; Carpenter, C.E.; Cummins, L.E.; Daub, G.J.

1992-01-01

The 'Technology Needs Assessment Final Report' describes current and planned environmental restoration activity, identifies technologies intended to be used or under consideration, and ranks technology deficiencies in the U.S. Department of Energy's environmental restoration program. Included in the ranking are treatment technologies, characterization technologies, and non-technology issues that affect environmental restoration. Data used for the assessment was gathered during interviews in the spring of 1991 with DOE site personnel responsible for the environmental restoration work. (author)

A climatological model for risk computations incorporating site- specific dry deposition influences

International Nuclear Information System (INIS)

Droppo, J.G. Jr.

1991-07-01

A gradient-flux dry deposition module was developed for use in a climatological atmospheric transport model, the Multimedia Environmental Pollutant Assessment System (MEPAS). The atmospheric pathway model computes long-term average contaminant air concentration and surface deposition patterns surrounding a potential release site incorporating location-specific dry deposition influences. Gradient-flux formulations are used to incorporate site and regional data in the dry deposition module for this atmospheric sector-average climatological model. Application of these formulations provide an effective means of accounting for local surface roughness in deposition computations. Linkage to a risk computation module resulted in a need for separate regional and specific surface deposition computations. 13 refs., 4 figs., 2 tabs

Environmental assessment of incinerator residue utilisation

OpenAIRE

Toller, Susanna; Kärrman, Erik; Gustafsson, Jon Petter; Magnusson, Y.

2009-01-01

Incineration ashes may be treated either as a waste to be dumped in landfill, or as a resource that is suit able for re-use. In order to choose the best management scenario, knowledge is needed on the potential environmental impact that may be expected, including not only local, but also regional and global impact. In this study. A life cycle assessment (LCA) based approach Was Outlined for environmental assessment of incinerator residue utilisation, in which leaching of trace elements as wel...

Environmental Safety and Health Analytical Laboratory, Pantex Plant, Amarillo, Texas. Final Environmental Assessment

International Nuclear Information System (INIS)

1995-06-01

The US Department of Energy (DOE) has prepared an Environmental Assessment (EA) of the construction and operation of an Environmental Safety and Health (ES ampersand H) Analytical Laboratory and subsequent demolition of the existing Analytical Chemistry Laboratory building at Pantex Plant near Amarillo, Texas. In accordance with the Council on Environmental Quality requirements contained in 40 CFR 1500--1508.9, the Environmental Assessment examined the environmental impacts of the Proposed Action and discussed potential alternatives. Based on the analysis of impacts in the EA, conducting the proposed action, construction of an analytical laboratory and demolition of the existing facility, would not significantly effect the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA) and the Council on Environmental Quality regulations in 40 CFR 1508.18 and 1508.27

Radiological assessments, environmental monitoring, and study design

International Nuclear Information System (INIS)

Hansen, W.R.; Elle, D.R.

1980-01-01

Studies of the behavior of transuranic elements in the environment form the basic data for applied programs in radiological assessment, environmental monitoring, derivation of radiation-protection standards, and environmental impact statements. This chapter introduces some of the major information requirements of these applications of transuranic research data. Characteristics of the source terms from nuclear activities usually are needed for an analysis of environmental pathways or deployment of monitoring systems. Major inhalation and ingestion pathways are considered in assessments of hazards from transuranics and are discussed from the viewpoint of research needed

The FASSET Framework for assessment of environmental impact of ionising radiation in European ecosystems-an overview

International Nuclear Information System (INIS)

Larsson, C-M

2004-01-01

The FASSET project was launched in November 2000 under the EC 5th Framework Programme to develop a framework for the assessment of environmental impact of ionising radiation in European ecosystems. It involved 15 organisations in seven European countries and delivered its final report in spring 2004. The project set out to organise radioecological and radiobiological data into a logical structure that would facilitate the assessment of likely effects on non-human biota resulting from known or postulated depositions of radionuclides in the environment. The project included an overview of 20 pathway-based environmental assessment systems targeted at radioactive substances, or at hazardous substances in general. The resulting framework includes the following fundamental elements: source characterisation; description of seven major European ecosystems; selection of a number of reference organisms on the basis of prior ecosystem and exposure analysis; environmental transfer analysis; dosimetric considerations; effects analysis; and general guidance on interpretation including consideration of uncertainties. The project has used existing information supplemented with development in some areas, e.g. Monte Carlo calculations to derive dose conversion coefficients, model development, and the building of an effects database (FRED, the FASSET Radiation Effects Database). On the basis of experience from FASSET and other recent programmes, it can be concluded that (i) there is substantial agreement in terms of conceptual approaches between different frameworks currently in use or proposed, (ii) differences in technical approaches can be largely attributed to differences in ecosystems of concern or in national regulatory requirements, (iii) sufficient knowledge is available to scientifically justify assessments following the Framework structure, but (iv) significant data gaps exist for environmental transfer of key nuclides as well as for effects data for key wildlife groups at

Environmental Management Assessment of the Stanford Linear Accelerator Center

International Nuclear Information System (INIS)

1994-01-01

This report documents the results of the Environmental Management Assessment of the Stanford Linear Accelerator Center (SLAC), Menlo Park, California. During this assessment, the activities conducted by the assessment team included reviews of internal documents and reports from previous assessments; interviews with the US Department of Energy (DOE), US Environmental Protection Agency, State Water Resources Board, California Regional Water Quality Control Board, and SLAC contractor personnel; and inspections and observations of selected facilities and operations. Onsite portion of the assessment was conducted from January 18 through January 31, 1994, by the DOE Office of Environmental Audit (EH-24), located within the Office of Environment, Safety and Health (EH), and the Environment and Safety Support Division (ESS), located within the Oakland Operations Office (OAK). The EH-24 environmental management assessment and the OAK functional appraisal were combined to minimize disruptions to the site. The management disciplines and three technical areas (air quality, groundwater, and inactive waste sites) were evaluated by EH-24, and four other technical areas (surface water, waste management, toxic and chemical materials, and environmental radiation) were assessed by ESS

Environmental economic impact assessment in China: Problems and prospects

International Nuclear Information System (INIS)

Lindhjem, Henrik; Hu Tao; Ma Zhong; Skjelvik, John Magne; Song Guojun; Vennemo, Haakon; Wu Jian; Zhang Shiqiu

2007-01-01

The use of economic valuation methods to assess environmental impacts of projects and policies has grown considerably in recent years. However, environmental valuation appears to have developed independently of regulations and practice of environmental impact assessment (EIA), despite its potential benefits to the EIA process. Environmental valuation may be useful in judging significance of impacts, determining mitigation level, comparing alternatives and generally enabling a more objective analysis of tradeoffs. In China, laws and regulations require the use of environmental valuation in EIA, but current practice lags far behind. This paper assesses the problems and prospects of introducing environmental valuation into the EIA process in China. We conduct four case studies of environmental economic impact assessment (EEIA), three of which are based on environmental impact statements of construction projects (a power plant, a wastewater treatment plant and a road construction project) and one for a regional pollution problem (wastewater irrigation). The paper demonstrates the potential usefulness of environmental valuation but also discusses several challenges to the introduction and wider use of EEIA, many of which are likely to be of relevance far beyond the Chinese context. The paper closes with suggesting some initial core elements of an EEIA guideline

Federal environmental assessment panel process

International Nuclear Information System (INIS)

Edwards, R.A.; King, J.M.

1996-01-01

The Government of Canada inaugurated an environmental assessment process in 1973. Since that time, the Department of Natural Resources, or its predecessor, the Department of Energy Mines and Resources, and industrial clients of the Department, have been major participants in the process. In 1995, the authors interviewed representatives of a number of client industries and selected individuals, to ask their opinion of the public hearing part of the environmental assessment process, with the objective of identifying shortcomings and proposing improvements. Respondents criticized the hearings as costly, time-wasting, bureaucratic, and uncertain in cost, time, and outcome. A number of observations on noted areas of shortcoming are presented in this paper, with suggestions for improvement

Federal environmental assessment panel process

Energy Technology Data Exchange (ETDEWEB)

Edwards, R A; King, J M [Natural Resources Canada, Ottawa, ON (Canada)

1997-12-31

The Government of Canada inaugurated an environmental assessment process in 1973. Since that time, the Department of Natural Resources, or its predecessor, the Department of Energy Mines and Resources, and industrial clients of the Department, have been major participants in the process. In 1995, the authors interviewed representatives of a number of client industries and selected individuals, to ask their opinion of the public hearing part of the environmental assessment process, with the objective of identifying shortcomings and proposing improvements. Respondents criticized the hearings as costly, time-wasting, bureaucratic, and uncertain in cost, time, and outcome. A number of observations on noted areas of shortcoming are presented in this paper, with suggestions for improvement.

Power and environmental assessment

DEFF Research Database (Denmark)

Cashmore, Matthew Asa; Richardson, Tim

2013-01-01

The significance of politics and power dynamics has long been recognised in environmental assessment (EA) research, but there has not been sustained attention to power, either theoretically or empirically. The aim of this special issue is to encourage the EA community to engage more consistently...

Environmental assessment of incinerator residue utilisation

OpenAIRE

Toller, Susanna

2008-01-01

 In Sweden, utilisation of incinerator residues outside disposal areas is restricted by environmental concerns, as such residues commonly contain greater amounts of potentially toxic trace elements than the natural materials they replace. On the other hand, utilisation can also provide environmental benefits by decreasing the need for landfill and reducing raw material extraction. This thesis provides increased knowledge and proposes better approaches for environmental assessment of incinerat...

Atmospheric Deposition Modeling Results

Data.gov (United States)

U.S. Environmental Protection Agency — This asset provides data on model results for dry and total deposition of sulfur, nitrogen and base cation species. Components include deposition velocities, dry...

A reassessment of the deposition velocity in the prediction of the environmental transport of radioiodine from air to milk

International Nuclear Information System (INIS)

Hoffman, F.O.

1977-01-01

The environmental transport of radioiodine from air to milk under conditions of dry deposition is considered with especial reference to the misinterpretation of experimentally derived values of the deposition velocity of elemental iodine by previous workers which has resulted in an apparent underestimation of this value. It is suggested that published predictions of the milk-to-air ratio be adjusted to account for this apparent error. (U.K.)

Applicable international environmental impact assessment laws for ...

African Journals Online (AJOL)

Lawrence Hart

1971-05-28

May 28, 1971 ... appraise selected International Environmental laws and the Nigerian Environmental Impact Assessment methodology ... maze of pipelines, delivery lines, flow lines, canals and .... Toxic Materials and international waterways.

Essential application of depositional analysis and interpretation in hydrogeologic assessments of contaminated sites

International Nuclear Information System (INIS)

Sciacca, J.

1991-01-01

In most hydrogeologic studies of contaminated sites, little attention is given to analysis of depositional environments and associated depositional patterns. This analysis is essential for sedimentary deposits present at a majority of these sites. The depositional processes associated with alluvial, fluvial and deltaic environments yield heterogeneity ranging from large to small scale. These processes also yield preferential grain orientations in coarse grained units which result in preferential directions of increased permeability. Studies conducted in fluvial and deltaic petroleum reservoirs have shown varying permeabilities resulting from deposition that strongly control the flow of fluids. The marked heterogeneity evident in the sandy portion of a single 3 to 30-foot thick fluvial point bar deposit can exert significant differences in porous flow. Preferential permeability has been shown parallel to the long axis of fluvial channel sand units while barrier beach sands exhibit preferential permeability perpendicular to the long axis of the sand body. Such controls influence natural flow and transport of contaminants in groundwater. Hydrogeologic studies should: determine the depositional environment and facies present at the site; determine the propensity for heterogeneity within the entire vertical sequence investigated and within the different facies present; assess the potential for preferential permeability within sand bodies; and provide a predictive depositional model to assess potential connections between major high permeability units. Sand unit connections are commonly forced during cross section generation and subsequent aquifer analysis. Failure to incorporate the above objectives in hydrogeologic investigations ignores the basic precept that process controls the distribution of permeability and will result in poor prediction of natural and remedial transport of contaminants in groundwater

Environmental Risk Assessment System for Phosphogypsum Tailing Dams

OpenAIRE

Xin Sun; Ping Ning; Xiaolong Tang; Honghong Yi; Kai Li; Lianbi Zhou; Xianmang Xu

2013-01-01

This paper may be of particular interest to the readers as it provides a new environmental risk assessment system for phosphogypsum tailing dams. In this paper, we studied the phosphogypsum tailing dams which include characteristics of the pollution source, environmental risk characteristics and evaluation requirements to identify the applicable environmental risk assessment methods. Two analytical methods, that is, the analytic hierarchy process (AHP) and fuzzy logic, were used to handle the...

Assessment of the implementation of environmental management ...

African Journals Online (AJOL)

Assessment of the implementation of environmental management system in the construction ... Journal of Fundamental and Applied Sciences ... The Environmental Management System (EMS) illustrates a possible solution to reduce the ...

Assessment of Environmental Performance of TiO2 Nanoparticles Coated Self-Cleaning Float Glass

Directory of Open Access Journals (Sweden)

Martina Pini

2017-01-01

Full Text Available In recent years, superhydrophilic and photocatalytic self-cleaning nanocoatings have been widely used in the easy-to-clean surfaces field. In the building sector, self-cleaning glass was one of the first nanocoating applications. These products are based on the photocatalytic property of a thin layer of titanium dioxide (TiO2 nanoparticles deposited on the surface of any kind of common glass. When exposed to UV radiation, TiO2 nanoparticles react with the oxygen and water molecules adsorbed on their surface to produce radicals leading to oxidative species. These species are able to reduce or even eliminate airborne pollutants and organic substances deposited on the material’s surface. To date, TiO2 nanoparticles’ benefits have been substantiated; however, their ecological and human health risks are still under analysis. The present work studies the ecodesign of the industrial scale-up of TiO2 nanoparticles self-cleaning coated float glass production performed by the life cycle assessment (LCA methodology and applies new human toxicity indicators to the impact assessment stage. Production, particularly the TiO2 nanoparticle application, is the life cycle phase most contributing to the total damage. According to the ecodesign approach, the production choices carried out have exacerbated environmental burdens.

43 CFR 46.310 - Contents of an environmental assessment.

Science.gov (United States)

2010-10-01

... implementation without the need for further analysis. Adaptive management includes a monitoring component... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Contents of an environmental assessment... OF THE NATIONAL ENVIRONMENTAL POLICY ACT OF 1969 Environmental Assessments § 46.310 Contents of an...

Environmental assessment, proposed generating station for Darlington

International Nuclear Information System (INIS)

1975-04-01

This document indicates the intention of Ontario Hydro to seek approval from the Provincial Government for its plan to construct and operate a 3400 MWe nuclear generating station at the Darlington site, west of Bowmanville. This preliminary proposal also contains the environmental assessment. The environmental section of this proposal describes and assesses the existing environment and the environmental influences which would occur due to the construction and operation of a nuclear generating station, consisting of four 850 MW units, at the Darlington site. This proposed station is similar to the Bruce GS A station presently under construction. (author)

Selecting environmental indicator for use in strategic environmental assessment

International Nuclear Information System (INIS)

Donnelly, Alison; Jones, Mike; O'Mahony, Tadhg; Byrne, Gerry

2007-01-01

The primary aim of carrying out Strategic Environmental Assessment (SEA) is to provide for a high level of environmental protection and to integrate environmental considerations into the planning process. The SEA Directive (2001/42/EC) recommends monitoring to determine the environmental impact of the implementation of plans and programmes. Environmental indicators are a useful tool by which this impact may be measured. However, careful consideration must be given to developing a set of indicators in order to isolate, plan or programme specific impacts. Here, we demonstrate the effectiveness of a workshop-based approach to develop appropriate criteria for selecting environmental indicator for use in SEA. A multi-disciplinary team was used in the approach which consisted of representatives from each of four environmental fields i.e. biodiversity, water, air and climatic factors, together with SEA experts, planning experts, academics and consultants. The team reviewed various sets of criteria, already in existence, for environmental indicator development but not specifically for SEA indicators. The results of this review together with original criteria were applied to the final list agreed upon. Some of the criteria recommended includes, relevance to plan, ability to prioritise, and ability to identify conflict with other plan or SEA objectives

The value of environmental impact assessments

International Nuclear Information System (INIS)

Sohocki, D.D.

1996-01-01

The environment and the economy are inextricably linked. Today the environmental, economic, and social associated with project and program decisions are at times of such a magnitude and duration that they exceed our ability to understand, let alone mitigate them. Energy production, distribution, pricing, policies, end uses, and externalities demonstrate the need for wise planning and informed decision making. International cooperation, based upon mutually shared respect, responsibility, and innovative solutions is an essential component of addressing contemporary issues, impacts, and opportunities. Both egypt and the united states have laws requiring environmental impact assessments. Just as egypt can learn from our successes and failures in the environmental impact assessment field over the past 36 years, the united states and other nations can learn as egypt develops and innovates its own approaches and solutions

GIS based procedure of cumulative environmental impact assessment.

Science.gov (United States)

Balakrishna Reddy, M; Blah, Baiantimon

2009-07-01

Scale and spatial limits of impact assessment study in a GIS platform are two very important factors that could have a bearing on the genuineness and quality of impact assessment. While effect of scale has been documented and well understood, no significant study has been carried out on spatial considerations in an impact assessment study employing GIS technique. A novel technique of impact assessment demonstrable through GIS approach termed hereby as 'spatial data integrated GIS impact assessment method (SGIAM)' is narrated in this paper. The technique makes a fundamental presumption that the importance of environmental impacts is dependent, among other things, on spatial distribution of the effects of the proposed action and of the affected receptors in a study area. For each environmental component considered (e.g., air quality), impact indices are calculated through aggregation of impact indicators which are measures of the severity of the impact. The presence and spread of environmental descriptors are suitably quantified through modeling techniques and depicted. The environmental impact index is calculated from data exported from ArcINFO, thus giving significant importance to spatial data in the impact assessment exercise.

PRINCIPLES OF ENVIRONMENTAL ASSESSMENT IN THE LIFECYCLE OF PRODUCTS

Directory of Open Access Journals (Sweden)

Joanna Kulczycka

2017-02-01

Full Text Available One of the aims of the European Commission (EC activities is to introduce uniform rules for the environmental performance assessment based on the life cycle assessment method (LCA, which can be widely used e.g. in eco-labeling, assessment of goods, services, technology, etc. Therefore, from 1 November 2013 the European Commission implemented a pilot phase of the project on developing common methods for measuring the environmental performance of the product and organisation, aims to develop guidance documents in this field. The pilot phase includes development of the Category Rules relating to the calculation, verification and communication for environmental footprint of the 25 categories of products and two organizations. Therefore, the article presents the principle of environmental performance based on life cycle assessment in relation to the objectives of the proposed methodology of environmental footprint.

Retrospective examination of geothermal environmental assessments

Energy Technology Data Exchange (ETDEWEB)

Webb, J.W.; Eddlemon, G.K.; Reed, A.W.

1984-03-01

Since 1976, the Department of Energy (DOE) has supported a variety of programs and projects dealing with the exploration, development, and utilization of geothermal energy. This report presents an overview of the environmental impacts associated with these efforts. Impacts that were predicted in the environmental analyses prepared for the programs and projects are reviewed and summarized, along with measures that were recommended to mitigate these impacts. Also, for those projects that have gone forward, actual impacts and implemented mitigation measures are reported, based on telephone interviews with DOE and project personnel. An accident involving spills of geothermal fluids was the major environmental concern associated with geothermal development. Other important considerations included noise from drilling and production, emissions of H/sub 2/S and cooling tower drift, disposal of solid waste (e.g., from H/sub 2/S control), and the cumulative effects of geothermal development on land use and ecosystems. Mitigation measures were frequently recommended and implemented in conjunction with noise reduction; drift elimination; reduction of fugitive dust, erosion, and sedimentation; blowout prevention; and retention of wastes and spills. Monitoring to resolve uncertainties was often implemented to detect induced seismicity and subsidence, noise, drift deposition, concentrations of air and water pollutants, and effects on groundwater. The document contains an appendix, based on these findings, which outlines major environmental concerns, mitigation measures, and monitoring requirements associated with geothermal energy. Sources of information on various potential impacts are also listed.

Quantitative Mineral Resource Assessment of Copper, Molybdenum, Gold, and Silver in Undiscovered Porphyry Copper Deposits in the Andes Mountains of South America

Science.gov (United States)

Cunningham, Charles G.; Zappettini, Eduardo O.; Vivallo S., Waldo; Celada, Carlos Mario; Quispe, Jorge; Singer, Donald A.; Briskey, Joseph A.; Sutphin, David M.; Gajardo M., Mariano; Diaz, Alejandro; Portigliati, Carlos; Berger, Vladimir I.; Carrasco, Rodrigo; Schulz, Klaus J.

2008-01-01

Quantitative information on the general locations and amounts of undiscovered porphyry copper resources of the world is important to exploration managers, land-use and environmental planners, economists, and policy makers. This publication contains the results of probabilistic estimates of the amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) in undiscovered porphyry copper deposits in the Andes Mountains of South America. The methodology used to make these estimates is called the 'Three-Part Form'. It was developed to explicitly express estimates of undiscovered resources and associated uncertainty in a form that allows economic analysis and is useful to decisionmakers. The three-part form of assessment includes: (1) delineation of tracts of land where the geology is permissive for porphyry copper deposits to form; (2) selection of grade and tonnage models appropriate for estimating grades and tonnages of the undiscovered porphyry copper deposits in each tract; and (3) estimation of the number of undiscovered porphyry copper deposits in each tract consistent with the grade and tonnage model. A Monte Carlo simulation computer program (EMINERS) was used to combine the probability distributions of the estimated number of undiscovered deposits, the grades, and the tonnages of the selected model to obtain the probability distributions for undiscovered metals in each tract. These distributions of grades and tonnages then can be used to conduct economic evaluations of undiscovered resources in a format usable by decisionmakers. Economic evaluations are not part of this report. The results of this assessment are presented in two principal parts. The first part identifies 26 regional tracts of land where the geology is permissive for the occurrence of undiscovered porphyry copper deposits of Phanerozoic age to a depth of 1 km below the Earth's surface. These tracts are believed to contain most of South America's undiscovered resources of copper. The

Qualitative assessment of selected areas of the world for undiscovered sediment-hosted stratabound copper deposits: Chapter Y in Global mineral resource assessment

Science.gov (United States)

Zientek, Michael L.; Wintzer, Niki E.; Hayes, Timothy S.; Parks, Heather L.; Briggs, Deborah A.; Causey, J. Douglas; Hatch, Shyla A.; Jenkins, M. Christopher; Williams, David J.; Zientek, Michael L.; Hammarstrom, Jane M.; Johnson, Kathleen M.

2015-12-14

A qualitative mineral resource assessment of sediment-hosted stratabound copper mineralized areas for undiscovered copper deposits was performed for 10 selected areas of the world. The areas, in alphabetical order, are (1) Belt-Purcell Basin, United States and Canada; (2) Benguela and Cuanza Basins, Angola; (3) Chuxiong Basin, China; (4) Dongchuan Group rocks, China; (5) Egypt–Israel–Jordan Rift, Egypt, Israel, and Jordan; (6) Maritimes Basin, Canada; (7) Neuquén Basin, Argentina; (8) Northwest Botswana Rift, Botswana and Namibia; (9) Redstone Copperbelt, Canada; and (10) Salta Rift System, Argentina. This assessment (1) outlines the main characteristics of the areas, (2) classifies known deposits by deposit model subtypes, and (3) ranks the areas according to their potential to contain undiscovered copper deposits.

Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

International Nuclear Information System (INIS)

1995-09-01

The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R ampersand D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI)

Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R&D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI).

Graphical Methodology of Global Pollution Index for the Environmental Impact Assessment Using Two Environmental Components

OpenAIRE

Corneliu Cojocaru; Diana Mariana Cocârţă; Irina Aura Istrate; Igor Creţescu

2017-01-01

One of the applied methods for environmental impact assessment is the index of global pollution (IGP) proposed by Rojanschi in 1991. This methodology enables the global estimation for the ecosystem state affected more or less by human activities. Unfortunately, Rojanschi’s method has a limitation; it can be applied only if at least three environmental components are considered. Frequently, many environmental impact assessment applications rely on analysis of only two environmental components....

Environmental Assessments and Stakeholder Involvement

International Nuclear Information System (INIS)

Wesolowski, Cassandra

2006-01-01

Directives and legislation on EIA and SEA need to provide more guidance on how and when public participation should be used. There are now several examples of how well public participation can be performed and the methods are becoming more proactive and innovative. By increasing the role of public participation within the Environmental Assessment process, plans, programmes and projects will become more publicly acceptable. There does need to be a balance as to where public participation is performed in the system, as too much can be a stress on resources and time, as well as producing ineffective results. Key stages such as scoping, preparing the environmental statement or report and decision-making need to be highlighted for the benefits public participation can have. The Aarhus Convention is certainly making a difference in the UK; however it is difficult to judge exactly how much difference yet. It was only fully implemented in the UK in 2005 although some Authorities were applying the three pillars prior to implementation. It is not clear how aware the general public are of the Convention and their rights. Empowering communities in the UK. will communities for decision-making in Environmental Assessments? Providing the public with resources to enable them to fully engage in the process will improve the participation and increase their confidence, but how will this increase their influence within the decision-making process? Ultimately, should the stakeholders and public just influence the incremental decisions made in Environmental Assessments or have more responsibility within the major decisions taken? It will be interesting to see how these issues are addressed over the coming years

Environmental Assessments and Stakeholder Involvement

Energy Technology Data Exchange (ETDEWEB)

Wesolowski, Cassandra [Univ. of Manchester, School of Environment and Development (United Kingdom). Planning and Landscape

2006-09-15

Directives and legislation on EIA and SEA need to provide more guidance on how and when public participation should be used. There are now several examples of how well public participation can be performed and the methods are becoming more proactive and innovative. By increasing the role of public participation within the Environmental Assessment process, plans, programmes and projects will become more publicly acceptable. There does need to be a balance as to where public participation is performed in the system, as too much can be a stress on resources and time, as well as producing ineffective results. Key stages such as scoping, preparing the environmental statement or report and decision-making need to be highlighted for the benefits public participation can have. The Aarhus Convention is certainly making a difference in the UK; however it is difficult to judge exactly how much difference yet. It was only fully implemented in the UK in 2005 although some Authorities were applying the three pillars prior to implementation. It is not clear how aware the general public are of the Convention and their rights. Empowering communities in the UK. will communities for decision-making in Environmental Assessments? Providing the public with resources to enable them to fully engage in the process will improve the participation and increase their confidence, but how will this increase their influence within the decision-making process? Ultimately, should the stakeholders and public just influence the incremental decisions made in Environmental Assessments or have more responsibility within the major decisions taken? It will be interesting to see how these issues are addressed over the coming years.

Environmental risk assessment: an Australian perspective. Supervising Scientist Report 102

International Nuclear Information System (INIS)

Beer, T.; Ziolkowski, F.

1995-01-01

Environmental risk assessment can be used as a strategic tool to set environmental priorities and as a tactical tool to set environmental standards. This report is designed to inform Australian environmental managers about the techniques and applications of environmental risk assessment and to familiarize risk analysts with some of the issues that are of concern to environmental managers. The use of risk assessment is illustrated by applying its techniques to five case studies which include: risk from chemicals and from contaminated sites; risk to people and to the natural environment from development, such as uranium mining; climate change; and risk associated with political decision-making. Then, by considering Australian and overseas practice, a generic framework is presented within which environmental risk assessment in Australia can be undertaken, and possible methods of implementation are discussed. refs., 38 figs

Environmental assessment of incinerator residue utilisation

Energy Technology Data Exchange (ETDEWEB)

Toller, Susanna

2008-10-15

In Sweden, utilisation of incinerator residues outside disposal areas is restricted by environmental concerns, as such residues commonly contain greater amounts of potentially toxic trace elements than the natural materials they replace. On the other hand, utilisation can also provide environmental benefits by decreasing the need for landfill and reducing raw material extraction. This thesis provides increased knowledge and proposes better approaches for environmental assessment of incinerator residue utilisation, particularly bottom ash from municipal solid waste incineration (MSWI). A life cycle assessment (LCA) based approach was outlined for environmental assessment of incinerator residue utilisation, in which leaching of trace elements as well as other emissions to air and water and the use of resources were regarded as constituting the potential environmental impact from the system studied. Case studies were performed for i) road construction with or without MSWI bottom ash, ii) three management scenarios for MSWI bottom ash and iii) three management scenarios for wood ash. Different types of potential environmental impact predominated in the activities of the system and the scenarios differed in use of resources and energy. Utilising MSWI bottom ash in road construction and recycling of wood ash on forest land saved more natural resources and energy than when these materials were managed according to the other scenarios investigated, including dumping in landfill. There is a potential for trace element leaching regardless of how the ash is managed. Trace element leaching, particularly of copper (Cu), was identified as being relatively important for environmental assessment of MSWI bottom ash utilisation. CuO is suggested as the most important type of Cu-containing mineral in weathered MSWI bottom ash, whereas in the leachate Cu is mainly present in complexes with dissolved organic matter (DOM). The hydrophilic components of the DOM were more important for Cu

Environmental impact assessment in the Fijian state sector

International Nuclear Information System (INIS)

Turnbull, Jane

2003-01-01

For over 20 years, the South Pacific state of Fiji has required developers to conduct more than 70 environmental impact assessments (EIA), without specifying the environmental quality or impacts it considers (in)appropriate. It has ignored aspects of EIA to which agencies funding development have paid little attention--assessing alternatives, monitoring outcomes and enforcing consent conditions. This infers the Fijian state is not serious about using EIA to control environmental quality. Factors other than technical shortcomings are shaping the way the state constrains EIA practice. Unless these factors change, the comprehensive EIA system proposed in Sustainable Development legislation will not prevent environmental degradation

Methods of Environmental Impact Assessment in Colombia

Directory of Open Access Journals (Sweden)

Javier Toro Calderón

2013-10-01

Full Text Available The Environmental Impact Assessment (EIA in Colombia constitutes the primary tool for making decisions with respect to projects, works and activities (PWA with potential for significant environmental impacts. In the case of the infrastructure of the PWA, the EIA is mandatory and determines the environmental license (EL for construction and operation. This paper analyzes the methods used to assess the environmental impact of the PWA that have applied for licenses with the Ministry of Environment and Sustainable Development. It was found that the method most frequently used is the qualitative proposal by Conesa, with modifications that reduce the effectiveness of the EIA and favor the subjectivity and bias of the evaluator. Finally a series of recom­mendations to improve the process in the country are proposed.

Environmental assessment of nanomaterial use in Denmark

DEFF Research Database (Denmark)

Kjølholt, Jesper; Gottschalk, Fadri; Brinch, Anna

This is the concluding report of the project "Nanomaterials – occurrence and effects in the Danish environment" (abbreviated NanoDEN), which part the Danish Government's initiative "Better Control of Nanomaterials" (“Bedre styr på nanomaterialer”) which is administered by the Danish Environmental...... Protection Agency. The projects in NanoDEN have aimed to investigate and generate new environmentally relevant knowledge on of nanomaterials on the Danish market and to assess the possible associated risks to the environment. The results from the sub-projects are summarized in the current report...... and it is assessed whether and how nanomaterials may pose a risk for the environment in Denmark. The assessment is based on investigations of nine selected nanomaterials, which are expected to be environmentally relevant based on knowledge of consumption quantities or how they are used. These data contribute...

Environmental impact and risk assessments and key factors contributing to the overall uncertainties.

Science.gov (United States)

Salbu, Brit

2016-01-01

There is a significant number of nuclear and radiological sources that have contributed, are still contributing, or have the potential to contribute to radioactive contamination of the environment in the future. To protect the environment from radioactive contamination, impact and risk assessments are performed prior to or during a release event, short or long term after deposition or prior and after implementation of countermeasures. When environmental impact and risks are assessed, however, a series of factors will contribute to the overall uncertainties. To provide environmental impact and risk assessments, information on processes, kinetics and a series of input variables is needed. Adding problems such as variability, questionable assumptions, gaps in knowledge, extrapolations and poor conceptual model structures, a series of factors are contributing to large and often unacceptable uncertainties in impact and risk assessments. Information on the source term and the release scenario is an essential starting point in impact and risk models; the source determines activity concentrations and atom ratios of radionuclides released, while the release scenario determine the physico-chemical forms of released radionuclides such as particle size distribution, structure and density. Releases will most often contain other contaminants such as metals, and due to interactions, contaminated sites should be assessed as a multiple stressor scenario. Following deposition, a series of stressors, interactions and processes will influence the ecosystem transfer of radionuclide species and thereby influence biological uptake (toxicokinetics) and responses (toxicodynamics) in exposed organisms. Due to the variety of biological species, extrapolation is frequently needed to fill gaps in knowledge e.g., from effects to no effects, from effects in one organism to others, from one stressor to mixtures. Most toxtests are, however, performed as short term exposure of adult organisms

Managing Air Quality - Human Health, Environmental and Economic Assessments

Science.gov (United States)

Human health and environmental assessments characterize health and environmental risks associated with exposure to pollution. Economic assessments evaluate the cost and economic impact of a policy or regulation & can estimate economic benefits.

Aligning environmental and regulatory procedures with a holistic project management approach for residue deposits

CSIR Research Space (South Africa)

Snyman, BJ

2006-01-01

Full Text Available ). 1.1 Legislative responses in South Africa The advent of a democratic South Africa has brought about the promulgation of new environmental legislation. This was necessary to give legal effect to the principles of sustainability as laid down.... Often project delays can be ascribed to non-conformance to the legal and regulatory processes, because: • The South African EIA legislative process that is applicable to mine residue deposition does not focus on project management procedures, project...

Environmental and Economic Assessment of Swedish Municipal Solid Waste Management in a Systems Perspective

International Nuclear Information System (INIS)

Eriksson, Ola

2003-01-01

Waste management is something that affects most people. The waste amounts are still increasing, but the waste treatment is changing towards recycling and integrated solutions. In Sweden producers' responsibility for different products, a tax and bans on deposition of waste at landfills implicates a reorganisation of the municipal solid waste management. Plans are made for new incineration plants, which leads to that waste combustion comes to play a role in the reorganisation of the Swedish energy system as well. The energy system is supposed to adapt to governmental decisions on decommission of nuclear plants and decreased use of fossil fuels. Waste from private households consists of hazardous waste, scrap waste, waste electronics and wastes that to a large extent are generated in the kitchen. The latter type has been studied in this thesis, except for newsprint, glass- and metal packages that by source separation haven't ended up in the waste bin. Besides the remaining amount of the above mentioned fractions, the waste consists of food waste, paper, cardboard- and plastic packages and inert material. About 80-90 % of this mixed household waste is combustible, and the major part of that is also possible to recycle. Several systems analyses of municipal solid waste management have been performed. Deposition at landfill has been compared to energy recovery, recycling of material (plastic and cardboard) and recycling of nutrients (in food waste). Environmental impact, fuel consumption and costs are calculated for the entire lifecycle from the households, until the waste is treated and the by-products have been taken care of. To stop deposition at landfills is the most important measure to take as to decrease the environmental impact from landfills, and instead use the waste as a resource, thereby substituting production from virgin resources (avoiding resource extraction and emissions). The best alternative to landfilling is incineration, but also material recycling

Environmental and Economic Assessment of Swedish Municipal Solid Waste Management in a Systems Perspective

Energy Technology Data Exchange (ETDEWEB)

Eriksson, Ola

2003-04-01

Waste management is something that affects most people. The waste amounts are still increasing, but the waste treatment is changing towards recycling and integrated solutions. In Sweden producers' responsibility for different products, a tax and bans on deposition of waste at landfills implicates a reorganisation of the municipal solid waste management. Plans are made for new incineration plants, which leads to that waste combustion comes to play a role in the reorganisation of the Swedish energy system as well. The energy system is supposed to adapt to governmental decisions on decommission of nuclear plants and decreased use of fossil fuels. Waste from private households consists of hazardous waste, scrap waste, waste electronics and wastes that to a large extent are generated in the kitchen. The latter type has been studied in this thesis, except for newsprint, glass- and metal packages that by source separation haven't ended up in the waste bin. Besides the remaining amount of the above mentioned fractions, the waste consists of food waste, paper, cardboard- and plastic packages and inert material. About 80-90 % of this mixed household waste is combustible, and the major part of that is also possible to recycle. Several systems analyses of municipal solid waste management have been performed. Deposition at landfill has been compared to energy recovery, recycling of material (plastic and cardboard) and recycling of nutrients (in food waste). Environmental impact, fuel consumption and costs are calculated for the entire lifecycle from the households, until the waste is treated and the by-products have been taken care of. To stop deposition at landfills is the most important measure to take as to decrease the environmental impact from landfills, and instead use the waste as a resource, thereby substituting production from virgin resources (avoiding resource extraction and emissions). The best alternative to landfilling is incineration, but also material

Manganese deposition in drinking water distribution systems.

Science.gov (United States)

Gerke, Tammie L; Little, Brenda J; Barry Maynard, J

2016-01-15

This study provides a physicochemical assessment of manganese deposits on brass and lead components from two fully operational drinking water distributions systems. One of the systems was maintained with chlorine; the other, with secondary chloramine disinfection. Synchrotron-based in-situ micro X-ray adsorption near edge structure was used to assess the mineralogy. In-situ micro X-ray fluorescence mapping was used to demonstrate the spatial relationships between manganese and potentially toxic adsorbed metal ions. The Mn deposits ranged in thickness from 0.01 to 400 μm. They were composed primarily of Mn oxides/oxhydroxides, birnessite (Mn(3+) and Mn(4+)) and hollandite (Mn(2+) and Mn(4+)), and a Mn silicate, braunite (Mn(2+) and Mn(4+)), in varying proportions. Iron, chromium, and strontium, in addition to the alloying elements lead and copper, were co-located within manganese deposits. With the exception of iron, all are related to specific health issues and are of concern to the U.S. Environmental Protection Agency (U.S. EPA). The specific properties of Mn deposits, i.e., adsorption of metals ions, oxidation of metal ions and resuspension are discussed with respect to their influence on drinking water quality. Copyright © 2015 Elsevier B.V. All rights reserved.

76 FR 48119 - Oral Rabies Vaccine Trial; Availability of a Risk Assessment and an Environmental Assessment

Science.gov (United States)

2011-08-08

...] Oral Rabies Vaccine Trial; Availability of a Risk Assessment and an Environmental Assessment AGENCY... environmental assessment relative to an oral rabies vaccination field trial in West Virginia. The environmental... rabies vaccine, analyzes the use of that vaccine in field safety and efficacy trials in West Virginia...

34 CFR 75.601 - Applicant's assessment of environmental impact.

Science.gov (United States)

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Applicant's assessment of environmental impact. 75.601... Conditions Must Be Met by a Grantee? Construction § 75.601 Applicant's assessment of environmental impact. An applicant shall include with its application its assessment of the impact of the proposed construction on...

Discussion on the post-project assessment of environmental impact for nuclear facilities

International Nuclear Information System (INIS)

Shang Zhaorong

2013-01-01

The paper introduces the background of post-project assessment of environmental impact in the world and focuses on the characteristic of environmental impact assessment for Chinese nuclear facilities construction projects, analyzes the necessity, principle and contents of post-project assessment of environmental impact on current Chinese nuclear facilities operation. It is considered that to start the post-project assessment of environmental impact, perfect the post-project assessment mechanism, introduce the post-project assessment into environmental impact assessment system are just at the night time. (author)

Biodiversity in environmental assessment-current practice and tools for prediction

International Nuclear Information System (INIS)

Gontier, Mikael; Balfors, Berit; Moertberg, Ulla

2006-01-01

Habitat loss and fragmentation are major threats to biodiversity. Environmental impact assessment and strategic environmental assessment are essential instruments used in physical planning to address such problems. Yet there are no well-developed methods for quantifying and predicting impacts of fragmentation on biodiversity. In this study, a literature review was conducted on GIS-based ecological models that have potential as prediction tools for biodiversity assessment. Further, a review of environmental impact statements for road and railway projects from four European countries was performed, to study how impact prediction concerning biodiversity issues was addressed. The results of the study showed the existing gap between research in GIS-based ecological modelling and current practice in biodiversity assessment within environmental assessment

Strategic environmental assessment for UK LLW management - 16392

International Nuclear Information System (INIS)

Craze, Andrew; Clark, Matthew; Davis, Pete

2009-01-01

NDA is delivering a Strategic Environmental Assessment (SEA) to underpin the UK Nuclear Industry Low Level Waste Strategy. The purpose of this assessment is embed sustainability issues into our decision making and to fulfill our requirements under the European Union's Strategic Environmental Assessment (SEA) Directive (2004/42/EU) and transposing UK Regulations, and to underpin the development of the strategy. The outputs of the SEA have provided input into particular aspects of the strategy, leading to a more robust and better informed result. Development of options to be assessed under the SEA has looked at a number of factors, including: - what the strategy is aiming to achieve - expectation from stakeholders as to what should be addressed - consideration of tactical approaches to implementation of the strategy in addition to high level strategic issues - links to other projects and programmes (for example the Environmental Safety Case for the Low Level Waste Repository. The SEA aims to provide a robust assessment of the environmental and sustainability impacts of alternative strategies for providing continued capability and capacity for the management and disposal of LLW in the UK. The assessment also considers other, more tactical, issues around implementation of the strategy, for example: issues around the location of LLW management facilities; the environmental impacts of alternative waste treatment options (metal recycling etc); considerations of alternative approaches to the classification of radioactive waste and opportunities that would result. Critical to the development of the SEA has been the involvement of statutory and non-statutory stakeholders, who have informed both the output and the approach taken. (authors)

Environmental radiation exposure: Regulation, monitoring, and assessment

International Nuclear Information System (INIS)

Chen, S.Y.; Yu, C.; Hong, K.J.

1991-01-01

Radioactive releases to the environment from nuclear facilities constitute a public health concern. Protecting the public from such releases can be achieved through the establishment and enforcement of regulatory standards. In the United States, numerous standards have been promulgated to regulate release control at nuclear facilities. Most recent standards are more restrictive than those in the past and require that radioactivity levels be as low as reasonably achievable (ALARA). Environmental monitoring programs and radiological dose assessment are means of ensuring compliance with regulations. Environmental monitoring programs provide empirical information on releases, such as the concentrations of released radioactivity in environmental media, while radiological dose assessment provides the analytical means of quantifying dose exposures for demonstrating compliance

Environmental assessment of the Carlsbad Environmental Monitoring and Research Center Facility

International Nuclear Information System (INIS)

1995-10-01

This Environmental Assessment has been prepared to determine if the Carlsbad Environmental Monitoring and Research Center (the Center), or its alternatives would have significant environmental impacts that must be analyzed in an Environmental Impact Statement. DOE's proposed action is to continue funding the Center. While DOE is not funding construction of the planned Center facility, operation of that facility is dependent upon continued funding. To implement the proposed action, the Center would initially construct a facility of approximately 2,300 square meters (25,000 square feet). The Phase 1 laboratory facilities and parking lot will occupy approximately 1.2 hectares (3 acres) of approximately 8.9 hectares (22 acres) of land which were donated to New Mexico State University (NMSU) for this purpose. The facility would contain laboratories to analyze chemical and radioactive materials typical of potential contaminants that could occur in the environment in the vicinity of the DOE Waste Isolation Pilot Plant (WIPP) site or other locations. The facility also would have bioassay facilities to measure radionuclide levels in the general population and in employees of the WIPP. Operation of the Center would meet the DOE requirement for independent monitoring and assessment of environmental impacts associated with the planned disposal of transuranic waste at the WIPP

Environmental assessment of the Carlsbad Environmental Monitoring and Research Center Facility

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

This Environmental Assessment has been prepared to determine if the Carlsbad Environmental Monitoring and Research Center (the Center), or its alternatives would have significant environmental impacts that must be analyzed in an Environmental Impact Statement. DOE`s proposed action is to continue funding the Center. While DOE is not funding construction of the planned Center facility, operation of that facility is dependent upon continued funding. To implement the proposed action, the Center would initially construct a facility of approximately 2,300 square meters (25,000 square feet). The Phase 1 laboratory facilities and parking lot will occupy approximately 1.2 hectares (3 acres) of approximately 8.9 hectares (22 acres) of land which were donated to New Mexico State University (NMSU) for this purpose. The facility would contain laboratories to analyze chemical and radioactive materials typical of potential contaminants that could occur in the environment in the vicinity of the DOE Waste Isolation Pilot Plant (WIPP) site or other locations. The facility also would have bioassay facilities to measure radionuclide levels in the general population and in employees of the WIPP. Operation of the Center would meet the DOE requirement for independent monitoring and assessment of environmental impacts associated with the planned disposal of transuranic waste at the WIPP.

Comparison of four bioindication methods for assessing the degree of environmental lead and cadmium pollution

International Nuclear Information System (INIS)

Dmuchowski, Wojciech; Gozdowski, Dariusz; Baczewska, Aneta Helena

2011-01-01

Highlights: ► In this study we examined level of contamination in extremely heavy polluted area. ► We examined four various bioindication methods. ► Results were presented in pollution maps. ► We evaluated relationships between examined bioindication methods. - Abstract: The purpose of this study was to assess the application of several bioindication methods for the monitoring of environmental pollution from Pb and Cd. The study area centered on the town of Olkusz, Poland, which is one of the oldest centers for the metallurgical industry in Europe. The assessment of environmental pollution due to metals was performed using four frequently used bioindication methods: moss-bag (Sphagnum fallax), determination of metal accumulation in Pleurozium schreberi, silver birch foliage, and Scots pine needles. The region of Olkusz, and especially the area surrounding the mining and metallurgical Bolesław complex, was extremely contaminated with Pb and Cd. The results of the investigations are presented as contamination deposition maps. Despite the application of various methods and the resulting diversity of the specific exposure periods for different biomonitors, the spatial distribution of contamination shown on the maps was similar, as confirmed by the statistical analysis of the results.

40 CFR 8.9 - Measures to assess and verify environmental impacts.

Science.gov (United States)

2010-07-01

... environmental impacts. 8.9 Section 8.9 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL ENVIRONMENTAL IMPACT ASSESSMENT OF NONGOVERNMENTAL ACTIVITIES IN ANTARCTICA § 8.9 Measures to assess and verify environmental impacts. (a) The operator shall conduct appropriate monitoring of key environmental indicators as...

Environmental assessment of a uranium experimental rock blasting in Portugal, using geophysical and hydrogeological methods

International Nuclear Information System (INIS)

Ramalho, E C; Midões, C; Costa, A; Lourenço, M C; Monteiro Santos, F A

2012-01-01

The Nisa uranium deposit, located in Central Portugal, has been known since the late 1960s. Some areas were explored at that time. Today, a few open pits and dumps remain in place and are a concern to local authorities. To assess the geoenvironmental problems caused by the main mining exploration composed of an experimental rock blasting, 3D electrical conductivity and resistivity models were made to develop a hydrogeological model to understand the possibility of contaminants transportation, such as uranium, from the dumps towards a dam located nearby. These 3D models were the support to show alteration layer thickness variations and fault zones at depths controlling groundwater circulation. Spectrometric surveys were also carried out and correlated with geology and geoelectrical structure. All this information was used in the construction of the 3D steady state hydrogeological model of the experimental rock blasting of Nisa. In this model, groundwater flow and the contaminant pathways were simulated. Some areas have very high radioactive values resulting from the geological formation characteristics and old dumps. However, results of the environmental assessment using geophysical and hydrogeological methods point to a critical situation restricted only to the area of the experimental rock blasting of the Nisa uranium deposit and its dumps. (paper)

Improving environmental impact and cost assessment for supplier evaluation

Science.gov (United States)

Beucker, Severin; Lang, Claus

2004-02-01

Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

Environmental assessment [of nuclear installations

International Nuclear Information System (INIS)

Townsley, M.

1989-01-01

The European Community has introduced a directive which instructs that for all projects likely to have a significant effect on the environment consent should only be given after a rigorous assessment of such effects has been carried out and presented as an environmental statement. Projects requiring environmental assessment include nuclear power stations, any thermal power station over 300MW, any radioactive waste storage or disposal facility, any installation which produces electricity, power lines, installations for fuel production, fuel reprocessing, radioactive waste processing and fuel enrichment. The statement must include a description of the likely effects, direct and indirect, on the environment of the development, with reference to human beings, flora, fauna, soil, water, air, climate, landscape, interactions of two or more of these, material assets and cultural heritage. Measures to avoid or remedy the impact must be included. (U.K.)

Assessing the Environmental Risks of Nanomaterials

DEFF Research Database (Denmark)

Grieger, Khara Deanne; Hansen, Steffen Foss; Baun, Anders

to a wide range of technical limitations. For instance, serious knowledge gaps remain within e.g. the detection of NM in the environment, developing adequate testing equipment and protocols, and toxicity endpoints (Grieger et al., 2009). In the past few years, many scientists and organizations have...... considered. Furthermore, we recommend the use of biomonitoring in some environmental ‘hot spots’ to serve as early warning detectors while the field of NM environmental risk assessment matures, as recommended in our previous work. Ultimately, this analysis may aid the advancement of environmental risk...

A statistical proposal for environmental impact assessment of development projects

International Nuclear Information System (INIS)

Plazas C, Julian A; De J Lema T, Alvaro; Leon P, Juan Diego

2009-01-01

Environmental impact assessment of development projects is a fundamental process, which main goal is to avoid that their construction and functioning, lead to serious and negative consequences on the environment. Some of the most important limitations of the models employed to assess environmental impacts, are the subjectivity of its parameters and weights, and the multicolineality among the variables, which represent high quantities of similar information. This work presents a multivariate statistical-based method that tries to diminish such limitations. For this purpose, environmental impact assessment, is valuated through different environmental impact attributes and environmental elements, synthesized in an environmental quality index (ICA in Spanish). ICA can be applied at different levels, such as at a project level, or applied only at a partial level on one or some environmental components.

Small-sized test of gravity separation and preliminary assessment of technology and economics in Guangshigou granite pegmatite type uranium deposit

Energy Technology Data Exchange (ETDEWEB)

Zhifu, Sun; Mingyue, Feng; Jiashu, Rong; Ziyang, Xu [Beijing Research Inst. of Uranium Geology (China)

1994-11-01

The small-sized test of gravity separation in Guangshigou granite pegmatite type uranium deposit has found a new avenue for the industrial utilization of ores from such uranium deposit, especially those low grade ones. The test has proved that the gravity separation is superior to hydrometallurgy in the aspect of uranium recovery from ores of the granite pegmatite type uranium deposit, by-product recovery and protection against environmental pollution.

Small-sized test of gravity separation and preliminary assessment of technology and economics in Guangshigou granite pegmatite type uranium deposit

International Nuclear Information System (INIS)

Sun Zhifu; Feng Mingyue; Rong Jiashu; Xu Ziyang

1994-01-01

The small-sized test of gravity separation in Guangshigou granite pegmatite type uranium deposit has found a new avenue for the industrial utilization of ores from such uranium deposit, especially those low grade ones. The test has proved that the gravity separation is superior to hydrometallurgy in the aspect of uranium recovery from ores of the granite pegmatite type uranium deposit, by-product recovery and protection against environmental pollution

Risk assessment of metals in road-deposited sediment along an urban–rural gradient

International Nuclear Information System (INIS)

Zhao, Hongtao; Li, Xuyong

2013-01-01

We applied the traditional risk assessment methods originally designed for soils and river sediments to evaluation of risk associated with metals in road-deposited sediment (RDS) along an urban–rural gradient that included central urban (UCA), urban village (UVA), central suburban county (CSA), rural town (RTA), and rural village (RVA) areas in the Beijing metropolitan region. A new indicator RI RDS was developed which integrated the RDS characteristics of mobility, grain size and amount with the potential ecological risk index. The risk associated with metals in RDS in urban areas was generally higher than that in rural areas based on the assessment using traditional methods, but the risk was higher in urban and rural village areas than the areas with higher administration units based on the indicator RI RDS . These findings implied that RDS characteristics variation with the urban–rural gradient must be considered in metal risk assessment and RDS washoff pollution control. Highlights: ► Spatial pattern of metal risk level associated with road-deposited sediment (RDS) along urban–rural gradients varied. ► Risk level of metals changed significantly when grain size was considered. ► A new index integrating RDS characteristics and potential ecological risk was developed. ► Results from the new index were improved relative to those of traditional assessment methods. -- A new index integrating road-deposited sediment characteristics and potential ecological risk was developed to assess metal risk along the urban–rural gradient

Is Environmental Impact Assessment fulfilling its potential?

DEFF Research Database (Denmark)

Larsen, Sanne Vammen

2014-01-01

fuel with CO2-neutral energy sources. A variety of these projects are subject to environmental impact assessment (EIA), which raises the following questions: What role does an impact assessment play? When is the project environmentally friendly? How are climate change-related impacts assessed......One of the topics receiving much attention in recent years is climate change and the potential of its integration in impact assessment, both in terms of achieving mitigation and adaptation. Renewable energy projects are part of the efforts to mitigate climate change, replacing the use of fossil...... adaptation is absent. Also, the results show an emphasis on positive impacts in the reports, and in a few cases discussions of enhancements. Identification and assessment of negative climate change impacts are less apparent. This leads to a discussion of the results in the light of the purpose of EIA....

Risk analysis within environmental impact assessment of proposed construction activity

Energy Technology Data Exchange (ETDEWEB)

Zeleňáková, Martina; Zvijáková, Lenka

2017-01-15

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

Risk analysis within environmental impact assessment of proposed construction activity

International Nuclear Information System (INIS)

Zeleňáková, Martina; Zvijáková, Lenka

2017-01-01

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

The Role of Deposition in Limiting the Hazard Extent of Dense-Gas Plumes

Energy Technology Data Exchange (ETDEWEB)

Dillon, M B

2008-05-11

Accidents that involve large (multi-ton) releases of toxic industrial chemicals and form dense-gas clouds often yield far fewer fatalities, casualties and environmental effects than standard assessment and emergency response models predict. This modeling study, which considers both dense-gas turbulence suppression and deposition to environmental objects (e.g. buildings), demonstrates that dry deposition to environmental objects may play a significant role in reducing the distance at which adverse impacts occur - particularly under low-wind, stable atmospheric conditions which are often considered to be the worst-case scenario for these types of releases. The degree to which the released chemical sticks to (or reacts with) environmental surfaces is likely a key parameter controlling hazard extents. In all modeled cases, the deposition to vertical surfaces of environmental objects (e.g. building walls) was more efficient in reducing atmospheric chemical concentrations than deposition to the earth's surface. This study suggests that (1) hazard extents may vary widely by release environment (e.g. grasslands vs. suburbia) and release conditions (e.g. sunlight or humidity may change the rate at which chemicals react with a surface) and (2) greenbelts (or similar structures) may dramatically reduce the impacts of large-scale releases. While these results are demonstrated to be qualitatively consistent with the downwind extent of vegetation damage in two chlorine releases, critical knowledge gaps exist and this study provides recommendations for additional experimental studies.

Environmental Impact Assessment (EIA, Strategic Environmental Assessment (SEA and Sustainability in Minas Gerais

Directory of Open Access Journals (Sweden)

Evandro Sanguinetto

2011-07-01

Full Text Available This paper was aimed at conducting a bibliographical research on Environmental Impact Assessment (EIA, Strategic Environmental Assessment (SEA and their relation to the Ecological Economic Zoning (EEZ in the state of Minas Gerais. It is believed that the EIA is subject to failures as it does not take into account larger impacts upon space, time, cumulative and synergistic effects, whereas reflecting a reductionist point of view of the undertaking to the detriment of a broader, systemic, holistic perspective. With a view to compensate for such failure, the SEA is seen as an appropriate tool for the evaluation of political impacts, plans and programs which, conversely, guides the implementation of projects in an more integrated manner. Therefore, two EIAs can be used as reference; one refers to a rural electrification program in the state of Minas Gerais and the other approaches the integration planning of water sources in the metropolitan area of the state of São Paulo. While planning the Ecological Economic Zoning of the state, Minas Gerais takes a decisive step forward the reduction of conflicts related with multiple interests of economic development, providing and forming the basis for the essential balance among profit, preservation and environmental conservation, social justice, respect and cultural diversity, political and institutional maturation, ethic and plurality, which splash the sustainability colors on the canvas of the future.

Health Impact Assessment Practice and Potential for Integration within Environmental Impact and Strategic Environmental Assessments in Italy

Science.gov (United States)

Linzalone, Nunzia; Assennato, Giorgio; Ballarini, Adele; Cadum, Ennio; Cirillo, Mario; Cori, Liliana; De Maio, Francesca; Musmeci, Loredana; Natali, Marinella; Rieti, Sabrina; Soggiu, Maria Eleonora; Bianchi, Fabrizio

2014-01-01

Avoiding or minimizing potential environmental impact is the driving idea behind protecting a population’s health via Environmental Impact Assessments (EIAs) and Strategic Environmental Assessments (SEAs). However, both are often carried out without any systematic approach. This paper describes the findings of a review of HIA, EIA and SEA experiences carried out by the authors, who act as institutional competent subjects at the national and regional levels in Italy. The analysis of how health is tackled in EIA and SEA procedures could support the definition of a protocol for the integration of HIA with EIA and SEA. Although EIA and SEA approaches include the aim of protecting health, significant technical and methodological gaps are present when assessing health systematically, and their basic principles regarding assessment are unsatisfactory for promoting and addressing healthcare concepts stated by the WHO. HIA is still poorly integrated into the decision-making process, screening and monitoring phases are only occasionally implemented, and operational details are not well-defined. The collaborative approach of institutions involved in environment and health is a core element in a systematic advancement toward supporting effective decisions and effective protection of the environment and health. At the Italian national level, the definition of guidelines and tools for HIA, also in relation with EIA and SEA, is of great interest. PMID:25493391

Strategic environmental assessment in post-modern times

International Nuclear Information System (INIS)

Fischer, Thomas B.

2003-01-01

The increasing awareness of the findings of policy and decision making theory in the environmental assessment community has recently led to an intensifying debate on the theoretical foundations and the appropriate practical use of strategic environmental assessment (SEA). In this context, most of the recent suggestions on how to improve practice have been influenced--consciously or sub-consciously--by the post-modernist paradigm, focusing particularly on a better integration of SEA into 'real' decision making and procedural flexibility. There have also been suggestions that traditional project environmental impact assessment (EIA)-based SEA approaches are generally inadequate. Reacting to the latter criticism, this paper aims at defending 'traditional' systematically structured and normative approaches to SEA. While it is acknowledged that a purely professional and technological paradigm to SEA is something of the past, it is proposed that leaving the design of 'flexible' SEA to the will of proponents and stakeholders might ultimately render it incapable of protecting the environment

Wind turbine environmental assessment -- Vol 1: Screening document

International Nuclear Information System (INIS)

2000-04-01

The environmental effects of the proposed construction and operation of up to three wind turbines on the Toronto waterfront are evaluated in accordance with the requirements of the Canadian Environmental Assessment Act (CEAA) and Regulations. The nine sections of the report provide background on the environmental assessment and the wind turbine project; provide justification for the project and describes alternative sites and wind turbine technologies; outlines the scope of the project; sketches the biophysical and socio-economic environment; presents an evaluation of the environmental impacts and proposed mitigating measures; describes the public consultation program that was carried out; summarizes the comments received from interested parties; presents the conclusion of the environmental impact assessment; and responds to the public comments received on the draft screening document. Most of the concerns raised involved avoidance reactions by birds, disruption or fragmentation of wildlife, the potential for high kill rate of small nocturnal migrants and young birds, and the effect of noise on breeding birds. The overall recommendation of the consultants is that the project is not likely to cause significant adverse environmental effects and its construction and operations should be authorized. 115 refs., 8 tabs., 2 figs. (14 appendices are in volume 2)

Assessing Environmental Impact on Aquatic Macrophyte Species ...

African Journals Online (AJOL)

Impact of environmental variables on distribution and composition of aquatic macrophyte community in a tropical river was assessed for one year (March 2009 to February 2010). Hypothesis tested was that the spatial variation in environmental variables on the river's longitudinal gradient affects macrophyte species ...

Methods of mineral potential assessment of uranium deposits: A mineral systems approach

International Nuclear Information System (INIS)

Jaireth, S.

2014-01-01

Mineral potential represents the likelihood (probability) that an economic mineral deposit could have formed in an area. Mineral potential assessment and prospectivity analysis use a probabilistic concepts to mineral deposits, where the probability of an event (formation of a mineral deposit) is conditional on two factors : i) geological processes occurring in the area, and ii) the presence of geological features indicative of those process. For instance, one of the geological processes critical for the formation of sandstone-hosted uranium deposits in an area is transport of uranium in groundwaters. Geological features indicative of this process in an area comprise, i) presence of leachable source rocks of uranium; ii) presence of highly permeable sandstone; and iii) suitable hydrogeological gradient driving flow groundwaters. Mineral deposits can also be conceptualised as mineral systems with more emphasis on mineralising processes. This concept has some clear parallels with the petroleum systems approach which has proven to be a useful in oil and gas exploration. Mineral systems are defined as ‘all geological factors that control the generation and preservation of mineral deposits’. Seven important geological factors are outlined to define the characteristics of a hydrothermal mineral system. These factors include: i) source of the mineralising fluids and transporting legends; ii) source of metals and other ore components; iii) migration pathways which may include inflow as well as outflow zones; iv) thermal gradients; v) source of energy to mobilised fluids; vi) mechanical and structural focusing mechanism at the trap site; and vii) chemical and/or physical cause for precipitation of ore minerals at the trap site. This approach, commonly known as the ‘source’, ‘transport’ and ‘trap’ paradigm has been redefined to introduce five questions as a basis to understand spatial and temporal evolution of a mineral system at all scales (regional to

Dealing with uncertainties in environmental burden of disease assessment

Directory of Open Access Journals (Sweden)

van der Sluijs Jeroen P

2009-04-01

Full Text Available Abstract Disability Adjusted Life Years (DALYs combine the number of people affected by disease or mortality in a population and the duration and severity of their condition into one number. The environmental burden of disease is the number of DALYs that can be attributed to environmental factors. Environmental burden of disease estimates enable policy makers to evaluate, compare and prioritize dissimilar environmental health problems or interventions. These estimates often have various uncertainties and assumptions which are not always made explicit. Besides statistical uncertainty in input data and parameters – which is commonly addressed – a variety of other types of uncertainties may substantially influence the results of the assessment. We have reviewed how different types of uncertainties affect environmental burden of disease assessments, and we give suggestions as to how researchers could address these uncertainties. We propose the use of an uncertainty typology to identify and characterize uncertainties. Finally, we argue that uncertainties need to be identified, assessed, reported and interpreted in order for assessment results to adequately support decision making.

Environmental impact and risk assessments and key factors contributing to the overall uncertainties

International Nuclear Information System (INIS)

Salbu, Brit

2016-01-01

There is a significant number of nuclear and radiological sources that have contributed, are still contributing, or have the potential to contribute to radioactive contamination of the environment in the future. To protect the environment from radioactive contamination, impact and risk assessments are performed prior to or during a release event, short or long term after deposition or prior and after implementation of countermeasures. When environmental impact and risks are assessed, however, a series of factors will contribute to the overall uncertainties. To provide environmental impact and risk assessments, information on processes, kinetics and a series of input variables is needed. Adding problems such as variability, questionable assumptions, gaps in knowledge, extrapolations and poor conceptual model structures, a series of factors are contributing to large and often unacceptable uncertainties in impact and risk assessments. Information on the source term and the release scenario is an essential starting point in impact and risk models; the source determines activity concentrations and atom ratios of radionuclides released, while the release scenario determine the physico-chemical forms of released radionuclides such as particle size distribution, structure and density. Releases will most often contain other contaminants such as metals, and due to interactions, contaminated sites should be assessed as a multiple stressor scenario. Following deposition, a series of stressors, interactions and processes will influence the ecosystem transfer of radionuclide species and thereby influence biological uptake (toxicokinetics) and responses (toxicodynamics) in exposed organisms. Due to the variety of biological species, extrapolation is frequently needed to fill gaps in knowledge e.g., from effects to no effects, from effects in one organism to others, from one stressor to mixtures. Most toxtests are, however, performed as short term exposure of adult organisms

Environmental Warning System Based on the DPSIR Model: A Practical and Concise Method for Environmental Assessment

Directory of Open Access Journals (Sweden)

Wenqi Wang

2018-05-01

Full Text Available Though we are in urgent need of environmental warnings to slow environmental deterioration, currently, there is no internationally concise method for environmental warnings. In addition, the existing approaches do not combine the three aspects of ecology, resources, and environment. At the same time, the three elements of the environment (air, water, and soil are separated in most environmental warning systems. Thus, the method this paper gives is an innovative attempt and aims to make environmental assessment more practical. This paper establishes the index system of an environmental early warning based on the Driving–Pressure–State–Influence–Response (DPSIR model. The Analytic Hierarchy Process (AHP method was used to determine the weights. Next, single and integrated index methods further assess the environmental warning state, in which the weighted summation method is used to summarize the data and results. The case of Tianjin is used to confirm the applicability of this method. In conclusion, the method in this paper is more well-behaved and, therefore, more suitable to assist cities in their environmental assessment.

Assessment of Global Mercury Deposition through Litterfall.

Science.gov (United States)

Wang, Xun; Bao, Zhengduo; Lin, Che-Jen; Yuan, Wei; Feng, Xinbin

2016-08-16

There is a large uncertainty in the estimate of global dry deposition of atmospheric mercury (Hg). Hg deposition through litterfall represents an important input to terrestrial forest ecosystems via cumulative uptake of atmospheric Hg (most Hg(0)) to foliage. In this study, we estimate the quantity of global Hg deposition through litterfall using statistical modeling (Monte Carlo simulation) of published data sets of litterfall biomass production, tree density, and Hg concentration in litter samples. On the basis of the model results, the global annual Hg deposition through litterfall is estimated to be 1180 ± 710 Mg yr(-1), more than two times greater than the estimate by GEOS-Chem. Spatial distribution of Hg deposition through litterfall suggests that deposition flux decreases spatially from tropical to temperate and boreal regions. Approximately 70% of global Hg(0) dry deposition occurs in the tropical and subtropical regions. A major source of uncertainty in this study is the heterogeneous geospatial distribution of available data. More observational data in regions (Southeast Asia, Africa, and South America) where few data sets exist will greatly improve the accuracy of the current estimate. Given that the quantity of global Hg deposition via litterfall is typically 2-6 times higher than Hg(0) evasion from forest floor, global forest ecosystems represent a strong Hg(0) sink.

The environmental impact assessment of uranium mining in Australia

International Nuclear Information System (INIS)

Morvell, G.

2002-01-01

Federal environmental impact assessment legislation has existed in Australia since 1974. A number of uranium mines have been developed in this time, utilizing a range of mining techniques, including opencut, underground and in-situ leach. Projects have also been undertaken in a variety of geographical areas requiring consideration of diverse biodiversity, cultural heritage and social impact issues. Assessment of uranium mining proposals in Australia is also conducted in a climate of political opposition from a cross section of the Australian community. This paper outlines some of the key issues that arose during recent assessments and which provide a lead to the role of environmental impact assessment in environmental policy development. Issues are also relevant to recent assessments on a replacement nuclear reactor, shipments of waste for reprocessing and proposed assessments on proposals for low and intermediate level nuclear waste facilities. (author)

Guidance on the environmental risk assessment of plant pests

DEFF Research Database (Denmark)

Baker, R.; Candresse, T.; Dormannsne Simon, E.

2011-01-01

The European Food Safety Authority (EFSA) requested the Panel on Plant Health to develop a methodology for assessing the environmental risks posed by harmful organisms that may enter, establish and spread in the European Union. To do so, the Panel first reviewed the methods for assessing...... the environmental risks of plant pests that have previously been used in pest risk assessment. The limitations identified by the review led the Panel to define the new methodology for environmental risk assessment which is described in this guidance document. The guidance is primarily addressed to the EFSA PLH...... (biodiversity) and the functional (ecosystem services) aspects of the environment, this new approach includes methods for assessing both aspects for the first time in a pest risk assessment scheme. A list of questions has been developed for the assessor to evaluate the consequences for structural biodiversity...

How relevant is the deposition of mercury onto snowpacks? – Part 1: A statistical study on the impact of environmental factors

Directory of Open Access Journals (Sweden)

K. A. Pfaffhuber

2012-10-01

Full Text Available A portion of the highly toxic methylmercury that bioaccumulates in aquatic life is created from mercury entering bodies of water with snowpack meltwater. To determine the importance of meltwater as a source of aquatic mercury, it is necessary to understand the environmental processes that govern the behavior of snowpack-related mercury. In this study we investigate relationships among 5 types of snowpack-related mercury observations and 20 model environmental variables. The observation types are the 24-h fractional loss of mercury from surface snow, and the concentrations of mercury in surface snow, seasonal snowpacks, the snowpack meltwater's ionic pulse, and long-term snowpack-related records. The model environmental variables include those related to atmospheric mercury, insolation, wind, atmospheric stability, snowpack physical characteristics, atmospheric pressure, and solid precipitation. Bivariate and multiple linear regressions were performed twice for each mercury observation type: once with all observations, and once excluding observations from locations where the snowpack's burden of oxidizing and stabilizing halogens is known or presumed to affect snowpack mercury. Since no observations from long-term snowpack-related records were considered affected by halogens, this group of observations was included with the sets of uninfluenced observations and was not discussed with the complete, original sets of observations. When all observations are included, only 37% of their variability can be explained, on average, with significance confidence levels averaging 81%; a separate regression model predicts each mercury observation type. Without the influence of halogens, the regression models are able to explain an average of 79% of the observations' variability with significance confidence levels averaging 97%. The snowpack-related mercury observations are most strongly controlled by the dry and wet depositions of oxidized mercury, and by

Spatial information in public consultation within environmental impact assessments

NARCIS (Netherlands)

Mwenda, A.N.

2015-01-01

Thesis Summary

Spatial information in public consultation within Environmental Impact Assessments

Angela N. Mwenda

Established in the United States of America in 1970, Environmental Impact Assessment (EIA) is an interdisciplinary approach that

Collaborative environmental assessment in the Northwest Territories, Canada

International Nuclear Information System (INIS)

Armitage, Derek R.

2005-01-01

Recent trends in environmental assessment theory and practice indicate a growing concern with collaboration and learning. Although there are few examples of the institutional, organizational, and socio-political forms and processes required to foster this collaboration and learning, the establishment of an environmental planning, management, and assessment regime in Canada's Northwest Territories offers useful insights. Consequently, this paper identifies and examines the institutional, organizational, and socio-political conditions that have encouraged more collaborative forms of environmental assessment practice in the Northwest Territories. Key issues highlighted include: (1) the development of decentralized regulatory organizations more responsive to changing circumstances; (2) strategies for more effective communication and participation of community interests; (3) efforts to build a collaborative vision of economic and social development through region-specific land use plans; (4) the integration of knowledge frameworks; and (5) a concern with the capacity required to encourage effective intervention in the assessment process

Environmental compliance assessment review

International Nuclear Information System (INIS)

Hilliday, G.H.

1991-01-01

During the period 1972-1991, The United States Congress passed stringent environmental statues which the Environment Protection Agency implemented via regulations. The statues and regulations contain severe civil and criminal penalties. Civil violations resulted in fines, typically payable by the company. The act of willfully and knowingly violating the permit conditions or regulations can result in criminal charges being imposed upon the responsible part, i.e., either the company or individual. Criminal charges can include fines, lawyer fees, court costs and incarceration. This paper describes steps necessary to form an effective Environmental Compliance Assessment Review [CAR] program, train field and engineering personnel and perform a CAR audit. Additionally, the paper discusses the findings of a number of Exploration and Production [E and P] field audits

Environmental impact assessment Geopressure Subprogram

Energy Technology Data Exchange (ETDEWEB)

None

1977-07-01

This environmental impact assessment (EIA) addresses the expected programmatic activities of the Geopressure Subprogram of the Division of Geothermal Energy. The goal of the Geopressure Subprogram is to stimulate development of geopressured resources as an economic, reliable, operationally safe, and environmentally acceptable energy source. The subprogram includes activities in the areas of engineering research and development; resource exploration, assessment, and development; resource utilization including pilot and demonstration facilities; and environmental research and control technology development. It should be recognized that most of the subprogram activities extend over several years and are in their early stages of implementation at this time. The zones of potential geopressure development are in the region located along the Texas and Louisiana Gulf Coasts extending up to 200 miles (300 km) inland. Geopressured zones are sedimentary basins where water is trapped at high pressures within or below thick, nearly impermeable shale sequences. The confined water supports most or all of the weight of the overburden. This inhibits sediment compaction and causes formation pore pressure to exceed hydrostatic pressure. in sedimentary basins that are underlain by thin oceanic crust, upward thermal conduction from the mantle heats geopressured fluids and sediments to abnormally high temperatures, often in excess of 260 C (500 F).

ENVIRONMENTAL IMPACT ASSESSMENT OF A HEALTH TECHNOLOGY: A SCOPING REVIEW.

Science.gov (United States)

Polisena, Julie; De Angelis, Gino; Kaunelis, David; Gutierrez-Ibarluzea, Iñaki

2018-06-13

The Health Technology Expert Review Panel is an advisory body to Canadian Agency for Drugs and Technologies in Health (CADTH) that develops recommendations on health technology assessments (HTAs) for nondrug health technologies using a deliberative framework. The framework spans several domains, including the environmental impact of the health technology(ies). Our research objective was to identify articles on frameworks, methods or case studies on the environmental impact assessment of health technologies. A literature search in major databases and a focused gray literature search were conducted. The main search concepts were HTA and environmental impact/sustainability. Eligible articles were those that described a conceptual framework or methods used to conduct an environmental assessment of health technologies, and case studies on the application of an environmental assessment. From the 1,710 citations identified, thirteen publications were included. Two articles presented a framework to incorporate environmental assessment in HTAs. Other approaches described weight of evidence practices and comprehensive and integrated environmental impact assessments. Central themes derived include transparency and repeatability, integration of components in a framework or of evidence into a single outcome, data availability to ensure the accuracy of findings, and familiarity with the approach used. Each framework and methods presented have different foci related to the ecosystem, health economics, or engineering practices. Their descriptions suggested transparency, repeatability, and the integration of components or of evidence into a single outcome as their main strengths. Our review is an initial step of a larger initiative by CADTH to develop the methods and processes to address the environmental impact question in an HTA.

Models and parameters for environmental radiological assessments

Energy Technology Data Exchange (ETDEWEB)

Miller, C W [ed.

1984-01-01

This book presents a unified compilation of models and parameters appropriate for assessing the impact of radioactive discharges to the environment. Models examined include those developed for the prediction of atmospheric and hydrologic transport and deposition, for terrestrial and aquatic food-chain bioaccumulation, and for internal and external dosimetry. Chapters have been entered separately into the data base. (ACR)

Models and parameters for environmental radiological assessments

International Nuclear Information System (INIS)

Miller, C.W.

1984-01-01

This book presents a unified compilation of models and parameters appropriate for assessing the impact of radioactive discharges to the environment. Models examined include those developed for the prediction of atmospheric and hydrologic transport and deposition, for terrestrial and aquatic food-chain bioaccumulation, and for internal and external dosimetry. Chapters have been entered separately into the data base

Environmental Assessment. Moanalua Shopping Center Redevelopment Oahu, Hawaii

National Research Council Canada - National Science Library

Pingree, Ryan; Halperin, William

2004-01-01

The Department of the Navy has prepared an Environmental Assessment (EA) and determined that an Environmental Impact Statement is not required for the redevelopment of the Moanalua Shopping Center (MSC) Oahu Hawaii...

Environmental Assessment for decontamination and dismantlement, Pinellas Plant

International Nuclear Information System (INIS)

1995-06-01

The US Department of Energy (DOE) has prepared an Environmental Assessment (EA) (DOE/EA-1092) of the proposed decontamination and dismantlement of the Pinellas Plant in Largo, Florida. Under the Decontamination and Dismantlement EA, the DOE proposes to clean up facilities, structures, and utilities; dismantle specific structures; and mitigate or eliminate any environmental impacts associated with the cleanup, dismantlement, and related activities. Related activities include utilization of specific areas by new tenants prior to full-scale cleanup. Based on the analyses in the EA, the DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act of 1969. Therefore, the preparation of an environmental impact statement is not required. This report contains the Environmental Assessment, as well as the Finding of No Significant Impact (FONSI)

Participatory Risk Assessment for Environmental Decision-Making

International Nuclear Information System (INIS)

Homan, Jacqueline; Petts, Judith

2001-01-01

Recent research, discussion and practice in the role environmental decision-making as an integral part of a democratic society have resulted in legislation, policy and guidance that encourage, and indeed may require, greater participation. The focus of this research paper is to explore these participatory ideas in the context of environmental risk assessment. Participation methods have generic application. However, the importance of fitting method to purpose requires that different contexts and issues relative to the objectives be addressed. In relation to environmental risk assessment these issues include: the complexity of risk issues per se; the inherent uncertainty that dominates any risk assessment; the quantitative nature of many risk assessments and the difficulty of dealing with low probability-high consequence outconies; the possibility of controversy in relation to decisions involving risk and thus the careful attention needed to the process and identification of participants; the traditional role and culture of experts in risk decisions and the challenge of reconciling this with the role of lay knowledge and the potential for the public to act as quality assurers in the risk decision process; the tendency for people to need reassurance when confronted with risk, even during a participation process; the need to acknowledge the public's ability to deal with complex technical issues and the need for information and data to respond to their questions, and the fact that 'risk' per se will often not be the only issue of public concern. The contributions to the risk debate from the social sciences are having considerable influence on the practice of environmental decision-making. Calls for increased stakeholder involvement in risk decisions are requiring greater access to and engagement with environmental risk assessments. Mechanisms for this level of involvement, however, are not well defined. For these aspirational calls to be realised in practice, decision

Participatory Risk Assessment for Environmental Decision-Making

Energy Technology Data Exchange (ETDEWEB)

Homan, Jacqueline; Petts, Judith [Univ. of Birmingham (United Kingdom). Centre for Environmental Research and Training; Pollard, Simon; Twigger-Ross, Clare [National Centre for Risk Analysis and Options Appraisal, London (United Kingdom)

2001-07-01

Recent research, discussion and practice in the role environmental decision-making as an integral part of a democratic society have resulted in legislation, policy and guidance that encourage, and indeed may require, greater participation. The focus of this research paper is to explore these participatory ideas in the context of environmental risk assessment. Participation methods have generic application. However, the importance of fitting method to purpose requires that different contexts and issues relative to the objectives be addressed. In relation to environmental risk assessment these issues include: the complexity of risk issues per se; the inherent uncertainty that dominates any risk assessment; the quantitative nature of many risk assessments and the difficulty of dealing with low probability-high consequence outconies; the possibility of controversy in relation to decisions involving risk and thus the careful attention needed to the process and identification of participants; the traditional role and culture of experts in risk decisions and the challenge of reconciling this with the role of lay knowledge and the potential for the public to act as quality assurers in the risk decision process; the tendency for people to need reassurance when confronted with risk, even during a participation process; the need to acknowledge the public's ability to deal with complex technical issues and the need for information and data to respond to their questions, and the fact that 'risk' per se will often not be the only issue of public concern. The contributions to the risk debate from the social sciences are having considerable influence on the practice of environmental decision-making. Calls for increased stakeholder involvement in risk decisions are requiring greater access to and engagement with environmental risk assessments. Mechanisms for this level of involvement, however, are not well defined. For these aspirational calls to be realised in

An integrated risk assessment approach: Risk assessment in the programmatic environmental impact statement

International Nuclear Information System (INIS)

Morris, J.M.

1994-01-01

The following paper is an informal summary of salient points made in the presentation entitled open-quotes An Integrated Risk Assessment Approach: Risk Assessment in the Programmatic Environmental Impact Statement (PEIS).close quotes. This presentation was given at the U.S. DOE Integrated Planning Workshop in Denver, Colorado on June 2, 1994. Integrated decision analysis is very important in environmental restoration and waste management in the evaluation of such things as land use planning, waste load forecasting, cost analyses, and technology development activities. Integrated risk assessment is an approach that addresses multiple components of risk, including: risks from surplus facilities as well as typical environmental restoration sites, risks to the public, risks to workers, ecological risk, risks before, during and after remediation activities, and others

Environmental justice, impact assessment and the politics of knowledge: The implications of assessing the social distribution of environmental outcomes

International Nuclear Information System (INIS)

Walker, Gordon

2010-01-01

Claims of environmental injustice have increasingly become part of environmental conflicts, both explicitly through the work of environmental justice campaigning groups and implicitly through the arguments deployed about the rights and wrongs of a given situation. Such claims can centre on different notions of justice, including those concerned with questions of distribution and procedure. This paper focuses on distributional or outcome justice and explores what implications follow when the distributional concerns of environmental justice are included in the practice of impact assessment processes, including through social impact assessment (SIA). The current use of impact assessment methods in the UK is reviewed showing that although practices are evolving there is a little routine assessment of distributional inequalities. It is argued that whilst this should become part of established practice to ensure that inequalities are revealed and matters of justice are given a higher profile, the implications for conflict within decision making processes are not straightforward. On the one hand, there could be scope for conflict to be ameliorated by analysis of inequalities informing the debate between stakeholders, and facilitating the implementation of mitigation and compensation measures for disadvantaged groups. On the other hand, contestation over how evidence is produced and therefore what it shows, and disagreement as to the basis on which justice and injustice are to be determined, means that conflict may also be generated and sustained within what are essentially political and strategic settings.

A radon progeny deposition model

International Nuclear Information System (INIS)

Rielage, Keith; Elliott, Steven R.; Hime, Andrew; Guiseppe, Vincent E.; Westerdale, S.

2010-01-01

The next generation low-background detectors operating underground aim for unprecedented low levels of radioactive backgrounds. Although the radioactive decays of airborne radon (particularly 222 Rn) and its subsequent progeny present in an experiment are potential backgrounds, also problematic is the deposition of radon progeny on detector materials. Exposure to radon at any stage of assembly of an experiment can result in surface contamination by progeny supported by the long half life (22 y) of 210 Pb on sensitive locations of a detector. An understanding of the potential surface contamination from deposition will enable requirements of radon-reduced air and clean room environments for the assembly of low background experiments. It is known that there are a number of environmental factors that govern the deposition of progeny onto surfaces. However, existing models have not explored the impact of some environmental factors important for low background experiments. A test stand has been constructed to deposit radon progeny on various surfaces under a controlled environment in order to develop a deposition model. Results from this test stand and the resulting deposition model are presented.

A Radon Progeny Deposition Model

International Nuclear Information System (INIS)

Guiseppe, V. E.; Elliott, S. R.; Hime, A.; Rielage, K.; Westerdale, S.

2011-01-01

The next generation low-background detectors operating underground aim for unprecedented low levels of radioactive backgrounds. Although the radioactive decays of airborne radon (particularly 222 Rn) and its subsequent progeny present in an experiment are potential backgrounds, also problematic is the deposition of radon progeny on detector materials. Exposure to radon at any stage of assembly of an experiment can result in surface contamination by progeny supported by the long half life (22 y) of 210 Pb on sensitive locations of a detector. An understanding of the potential surface contamination from deposition will enable requirements of radon-reduced air and clean room environments for the assembly of low background experiments. It is known that there are a number of environmental factors that govern the deposition of progeny onto surfaces. However, existing models have not explored the impact of some environmental factors important for low background experiments. A test stand has been constructed to deposit radon progeny on various surfaces under a controlled environment in order to develop a deposition model. Results from this test stand and the resulting deposition model are presented.

The Environmental Assessment Technique: An Empirical Study.

Science.gov (United States)

Overall, Jesse U., IV

The purpose of the study was to investigate the effectiveness of Alexander Astin's Environmental Assessment Technique (EAT) in describing the environmental press at a large public university, California State University at Los Angeles. Results indicate that EAT is a very economical method for broadly describing aspects of a university's…

An Assessment of Environmental Impacts Assessment (EIA in Malaysia

Directory of Open Access Journals (Sweden)

Abdul Hamid Masdiah

2017-01-01

Full Text Available The effectiveness of Environmental Impact Assessment (EIA in evaluating the planning project is a debatable issue among academics and practitioners, since EIA has been claimed to be unable to eliminate the environmental issues. Focusing only on technical improvements is not sufficient for rectifying the problems of EIA; the process of EIA should be clearly identified instead to maximise the effective use of EIA. It is important to note that the effective use of EIA, particularly on process-related issues could significantly minimise bad environmental effects. In summary, this study aims to explore and identify the effectiveness of EIA in the planning process and barriers to evaluate the environmental performance in Malaysia. The findings of this study could be a baseline for organisation to minimize emission, avoid the risk of prosecution and fines arising from potential environment breaches and cost reduction within the organisation.

A new paradigm for Environmental Assessment (EA) in Korea

International Nuclear Information System (INIS)

Song, Young-Il; Glasson, John

2010-01-01

Over the last 30 years, Environmental Impact Assessment (EIA) in Korea has played an important role in decision-making processes particularly for environmentally sensitive projects. However, the EIA system alone has sometimes not been effective enough to ensure the successful resolution of environmental concerns. In order to compensate for the limitations of the EIA system, a new assessment system called Prior Environmental Review System (PERS), which is relevant to Strategic Environmental Assessment (SEA) in some aspects, was introduced in 1993. PERS aims to balance development and preservation by identifying possible environmental impacts of some administrative plans mainly related to development projects in the early stages of planning. However, PERS still appeared to have some weak points such as a limited range of subjects to be assessed, and weakness of tiering (or vertical integration) from PERS to EIA. Therefore, the necessity for reform of the Korean Environmental Assessment (EA) system, including PERS, was raised. In response, the Korean government sought to establish its policy direction for implementing SEA by enhancing the objectivity and expertise of PERS. The policy was approved by the National Assembly in May 2005, and went into effect in June 2006. The introduction of SEA, by enhancing PERS, provides a framework for a system of EA from the strategic level, including PPPs, to the project level. Yet, despite such improvements, some managerial and technical problems associated with subsequent EA implementation remain. This paper critically reviews the evolution of the EA system in Korea and suggests essential improvements for the current EA system based on experiences of implementation of both EIA and SEA since June 2006, in the context of international good practice.

Environmental income improves household-level poverty assessments and dynamics

DEFF Research Database (Denmark)

Walelign, Solomon Zena; Charlery, Lindy Callen; Smith-Hall, Carsten

2016-01-01

Household-level poverty assessments and analyses of poverty dynamics in developing countries typically do not include environmental income. Using household (n = 427 in 2006, 2009 and 2012) total income panel data sets, with and without environmental income, from Nepal, we analysed the importance...... of environmental income in household-level poverty assessments (Foster-Greer-Thorbecke indices) and dynamics (movements in the Poverty Transition Matrix). Random effects logit and ordered logit models were applied to estimate variables covarying with poverty categories and compared for annual household incomes...... with and without environmental income. Using the without environmental income data set significantly changed the number of households classified as poor, as well as rates of movements in and out of poverty. Excluding household-level environmental income also distorted estimation of covariates of poverty incidence...

Environmental assessment of solid waste systems and technologies: EASEWASTE

DEFF Research Database (Denmark)

Kirkeby, Janus Torsten; Birgisdottir, Harpa; Hansen, Trine Lund

2006-01-01

A new model has been developed for evaluating the overall resource consumption and environmental impacts of municipal solid waste management systems by the use of life cycle assessment. The model is named EASEWASTE (Environmental Assessment of Solid Waste Systems and Technologies) and is able...... may not always be the most environmentally friendly. The EASEWASTE model can identify the most environmentally sustainable solution, which may differ among waste materials and regions and can add valuable information about environmental achievements from each process in a solid waste management system....... to compare different waste management strategies, waste treatment methods and waste process technologies. The potential environmental impacts can be traced back to the most important processes and waste fractions that contribute to the relevant impacts. A model like EASEWASTE can be used by waste planners...

Porphyry copper assessment of northeast Asia: Far East Russia and northeasternmost China: Chapter W in Global mineral resource assessment

Science.gov (United States)

Mihalasky, Mark J.; Ludington, Stephen; Alexeiev, Dmitriy V.; Frost, Thomas P.; Light, Thomas D.; Briggs, Deborah A.; Hammarstrom, Jane M.; Wallis, John C.; Bookstrom, Arthur A.; Panteleyev, Andre

2015-01-01

The U.S. Geological Survey assesses resources (mineral, energy, water, environmental, and biologic) at regional, national, and global scales to provide science in support of land management and decision making. Mineral resource assessments provide a synthesis of available information about where mineral deposits are known and suspected to be in the Earth’s crust, which commodities may be present, and estimates of amounts of resources in undiscovered deposits.

A mathematical model for environmental risk assessment in manufacturing industry

Institute of Scientific and Technical Information of China (English)

何莉萍; 徐盛明; 陈大川; 党创寅

2002-01-01

Environmental conscious manufacturing has become an important issue in industry because of market pressure and environmental regulations. An environmental risk assessment model was developed based on the network analytic method and fuzzy set theory. The "interval analysis method" was applied to deal with the on-site monitoring data as basic information for assessment. In addition, the fuzzy set theory was employed to allow uncertain, interactive and dynamic information to be effectively incorporated into the environmental risk assessment. This model is a simple, practical and effective tool for evaluating the environmental risk of manufacturing industry and for analyzing the relative impacts of emission wastes, which are hazardous to both human and ecosystem health. Furthermore, the model is considered useful for design engineers and decision-maker to design and select processes when the costs, environmental impacts and performances of a product are taken into consideration.

A Concept for Multi-Criteria Environmental Assessment of Aircraft Trajectories

Directory of Open Access Journals (Sweden)

Sigrun Matthes

2017-08-01

Full Text Available Comprehensive assessment of the environmental aspects of flight movements is of increasing interest to the aviation sector as a potential input for developing sustainable aviation strategies that consider climate impact, air quality and noise issues simultaneously. However, comprehensive assessments of all three environmental aspects do not yet exist and are in particular not yet operational practice in flight planning. The purpose of this study is to present a methodology which allows to establish a multi-criteria environmental impact assessment directly in the flight planning process. The method expands a concept developed for climate optimisation of aircraft trajectories, by representing additionally air quality and noise impacts as additional criteria or dimensions, together with climate impact of aircraft trajectory. We present the mathematical framework for environmental assessment and optimisation of aircraft trajectories. In that context we present ideas on future implementation of such advanced meteorological services into air traffic management and trajectory planning by relying on environmental change functions (ECFs. These ECFs represent environmental impact due to changes in air quality, noise and climate impact. In a case study for Europe prototype ECFs are implemented and a performance assessment of aircraft trajectories is performed for a one-day traffic sample. For a single flight fuel-optimal versus climate-optimized trajectory solution is evaluated using prototypic ECFs and identifying mitigation potential. The ultimate goal of such a concept is to make available a comprehensive assessment framework for environmental performance of aircraft operations, by providing key performance indicators on climate impact, air quality and noise, as well as a tool for environmental optimisation of aircraft trajectories. This framework would allow studying and characterising changes in traffic flows due to environmental optimisation, as well

ENVIRONMENTAL AUDITING: AN INTEGRATED ENVIRONMENTAL ASSESSMENT OF THE U.S. MID-ATLANTIC REGION

Science.gov (United States)

Many of today's environmental problems are regional in scope and their effects overlap and interact. We developed a simple method to provide an integrated assessment of environmental conditions and estimate cumulative impacts across a large region, by combining data on land-cove...

Integrated manure management to reduce environmental impact: II. Environmental impact assessment of strategies

NARCIS (Netherlands)

Vries, de J.W.; Groenestein, C.M.; Schroder, J.J.; Hoogmoed, W.B.; Sukkel, W.; Groot Koerkamp, P.W.G.; Boer, de I.J.M.

2015-01-01

Manure management contributes to adverse environmental impacts through losses of nitrogen (N), phosphorus, and carbon (C). In this study, we aimed to assess the potential of newly designed strategies for integrated manure management (IS) to reduce environmental impact. An important aspect of the

Strategic Environmental Assessment and Sustainable Development

Science.gov (United States)

Tian, Mingjing; Gao, Qingjun; Wang, Nan; Yang, Xigen; Xu, Xin; Zhang, Lu

2018-04-01

The development of social science and technology economy, the international community more and more attention to environmental and development issues. So the main goal pursued by people is not only to meet the needs of social and natural resources, while at the same time being able to protect the needs of future generations. This is the path of sustainable development. Therefore, this paper is a detailed study of strategic environmental assessment and sustainable development.

Application of semiempirical expressions to the alpha and beta radiometry of environmental depositions samples

International Nuclear Information System (INIS)

Perez Tamayo, L.

1996-01-01

Were applied two semiempirical equations exponential beta absorption and Bragg-Kleeman approximation complementary to experimental corrections for beta backscattering and auto absorption of beta and alpha radiations in measurements of environmental depositions samples In the first case was verified the validity of mentioned corrections with an application boundary to mass greater than 300 Pb-210 (0.015 mg/cm 2 ) In the second case, the Bragg-Kleeman approximation combined with the experimental beta corrections, bring a judgment to determine the fundamental alpha and beta emisors samples which results the Pb-210 group

Recovery in environmental risk assessment at EFSA

NARCIS (Netherlands)

Brock, T.C.M.

2016-01-01

EFSA performs environmental risk assessments (ERAs) for single potential stressors such as plant protection products, genetically modified organisms and feed additives and for invasive alien species that are harmful for plant health. In this risk assessment domain, the EFSA Scientific Committee

Geomorphological hazards and environmental impact: Assessment and mapping

Science.gov (United States)

Panizza, Mario

In five sections the author develops the methods for the integration of geomorphological concepts into Environmental Impact and Mapping. The first section introduces the concepts of Impact and Risk through the relationships between Geomorphological Environment and Anthropical Element. The second section proposes a methodology for the determination of Geomorphological Hazard and the identification of Geomorphological Risk. The third section synthesizes the procedure for the compilation of a Geomorphological Hazards Map. The fourth section outlines the concepts of Geomorphological Resource Assessment for the analysis of the Environmental Impact. The fifth section considers the contribution of geomorphological studies and mapping in the procedure for Environmental Impact Assessment.

Human exposure assessment to environmental chemicals using biomonitoring.

Science.gov (United States)

Calafat, Antonia M; Ye, Xiaoyun; Silva, Manori J; Kuklenyik, Zsuzsanna; Needham, Larry L

2006-02-01

In modern societies, humans may be exposed to a wide spectrum of environmental chemicals. Although the health significance of this exposure for many chemicals is unknown, studies to investigate the prevalence of exposure are warranted because of the chemicals' potential harmful health effects, as often indicated in animal studies. Three tools have been used to assess exposure: exposure history/questionnaire information, environmental monitoring, and biomonitoring (i.e. measuring concentrations of the chemicals, their metabolites, or their adducts in human specimens). We present an overview on the use of biomonitoring in exposure assessment using phthalates, bisphenol A and other environmental phenols, and perfluorinated chemicals as examples. We discuss some factors relevant for interpreting and understanding biomonitoring data, including selection of both biomarkers of exposure and human matrices, and toxicokinetic information. The use of biomonitoring in human risk assessment is not discussed.

Assessment of Environmental Sustainability in Health Care Organizations

Directory of Open Access Journals (Sweden)

María Carmen Carnero

2015-06-01

Full Text Available Healthcare organizations should set a standard in corporate social responsibility and encourage environmental sustainability, since protection of the environment implies the development of preventive measures in healthcare. Environmental concern has traditionally focused on manufacturing plants. However, a Health Care Organization (HCO is the only type of company which generates all existing classes of waste, and 20% is dangerous, being infectious, toxic or radioactive in nature. Despite the extensive literature analysing environmental matters, there is no objective model for assessing the environmental sustainability of HCOs in such a way that the results may be compared over time for an organization, and between different organizations, to give a comparison or benchmarking tool for HCOs. This paper presents a Multi-Criteria Decision Analysis model integrating a Fuzzy Analytic Hierarchy Process and utility theory, to evaluate environmental sustainability in HCOs. The model uses criteria assessed as a function of the number of annual treatments undertaken. The model has been tested in two HCOs of very different sizes.

Assessment of radon-daughter deposition in the respiratory tract

International Nuclear Information System (INIS)

Oberstedt, S.; Vanmarcke, H.

1996-01-01

Since some decades it is known, that most of the radiation dose to the lung is due to the inhalation of the short-lived decay products of 222 Rn. Their deposition in the respiratory tract strongly depends on the attachment rate to aerosol-particles present in the indoor air and their plate-out rate to the surfaces, instead of measuring the activity size distribution of the airborne decay products, knowledge on the respiratory tract retention has been incorporated in the design of a measurement system, called bronchial dosemeter, to assess the lung dose directly. The simulation of the deposition characteristics of the short-lived radon daughters in the nasal cavity and the bronchial tree is based on the comparison of the model of the respiratory tract with results from screen penetration theory. A bronchial dosemeter consisting of three sampling heads has been built and calibrated. Additionally, an outline of future activities will be given. (author)

Ecological geology environmental assessment of open-pit mines

International Nuclear Information System (INIS)

Dong Shuangfa; Jiang Xue

2010-01-01

In this paper, there is a detail description of ecological geology environmental assessment of open-pit mines, including method, process and results. We took ecological geology environmental assessment work on the base of the results of some open-pit mines such as extremely low content magnetite in Hebei Province, inducted and summarized the ecological geology environment quality. The results are reasonable. It provides basic data for the second mines programming in Hebei Province. (authors)

Environmental Risk Assessment Strategy for Nanomaterials

Directory of Open Access Journals (Sweden)

Janeck J. Scott‐Fordsmand

2017-10-01

Full Text Available An Environmental Risk Assessment (ERA for nanomaterials (NMs is outlined in this paper. Contrary to other recent papers on the subject, the main data requirements, models and advancement within each of the four risk assessment domains are described, i.e., in the: (i materials, (ii release, fate and exposure, (iii hazard and (iv risk characterisation domains. The material, which is obviously the foundation for any risk assessment, should be described according to the legislatively required characterisation data. Characterisation data will also be used at various levels within the ERA, e.g., exposure modelling. The release, fate and exposure data and models cover the input for environmental distribution models in order to identify the potential (PES and relevant exposure scenarios (RES and, subsequently, the possible release routes, both with regard to which compartment(s NMs are distributed in line with the factors determining the fate within environmental compartment. The initial outcome in the risk characterisation will be a generic Predicted Environmental Concentration (PEC, but a refined PEC can be obtained by applying specific exposure models for relevant media. The hazard information covers a variety of representative, relevant and reliable organisms and/or functions, relevant for the RES and enabling a hazard characterisation. The initial outcome will be hazard characterisation in test systems allowing estimating a Predicted No-Effect concentration (PNEC, either based on uncertainty factors or on a NM adapted version of the Species Sensitivity Distributions approach. The risk characterisation will either be based on a deterministic risk ratio approach (i.e., PEC/PNEC or an overlay of probability distributions, i.e., exposure and hazard distributions, using the nano relevant models.

Environmental Risk Assessment Strategy for Nanomaterials.

Science.gov (United States)

Scott-Fordsmand, Janeck J; Peijnenburg, Willie J G M; Semenzin, Elena; Nowack, Bernd; Hunt, Neil; Hristozov, Danail; Marcomini, Antonio; Irfan, Muhammad-Adeel; Jiménez, Araceli Sánchez; Landsiedel, Robert; Tran, Lang; Oomen, Agnes G; Bos, Peter M J; Hund-Rinke, Kerstin

2017-10-19

An Environmental Risk Assessment (ERA) for nanomaterials (NMs) is outlined in this paper. Contrary to other recent papers on the subject, the main data requirements, models and advancement within each of the four risk assessment domains are described, i.e., in the: (i) materials, (ii) release, fate and exposure, (iii) hazard and (iv) risk characterisation domains. The material, which is obviously the foundation for any risk assessment, should be described according to the legislatively required characterisation data. Characterisation data will also be used at various levels within the ERA, e.g., exposure modelling. The release, fate and exposure data and models cover the input for environmental distribution models in order to identify the potential (PES) and relevant exposure scenarios (RES) and, subsequently, the possible release routes, both with regard to which compartment(s) NMs are distributed in line with the factors determining the fate within environmental compartment. The initial outcome in the risk characterisation will be a generic Predicted Environmental Concentration (PEC), but a refined PEC can be obtained by applying specific exposure models for relevant media. The hazard information covers a variety of representative, relevant and reliable organisms and/or functions, relevant for the RES and enabling a hazard characterisation. The initial outcome will be hazard characterisation in test systems allowing estimating a Predicted No-Effect concentration (PNEC), either based on uncertainty factors or on a NM adapted version of the Species Sensitivity Distributions approach. The risk characterisation will either be based on a deterministic risk ratio approach (i.e., PEC/PNEC) or an overlay of probability distributions, i.e., exposure and hazard distributions, using the nano relevant models.

Human health risk assessment of lead pollution in atmospheric deposition in Baoshan District, Shanghai.

Science.gov (United States)

Chen, Yuanyuan; Wang, Jun; Shi, Guitao; Sun, Xiaojing; Chen, Zhenlou; Xu, Shiyuan

2011-12-01

The lead (Pb) content in atmospheric deposition was determined at 42 sampling sites in Baoshan District of Shanghai, China. Based on exposure and dose-response assessments, the health risk caused by Pb exposure in atmospheric deposition was investigated. The results indicated that Pb was significantly accumulated in atmospheric deposition. The spatial distribution of Pb was mapped by geostatistical analysis, and the results showed that pollution hotspots were present at traffic and industrial zones. Ingestion was the main route of Pb exposure in both adults and children. For children the risk value was above 1, whereas it was below 1 for the adult group. Therefore, children belong to the high-risk group for Pb exposure from atmospheric deposition in the observed area of Shanghai, China.

Environmental assessment of energy production from waste and biomass

DEFF Research Database (Denmark)

Tonini, Davide

. To evaluate the environmental and energy performance of bioenergy and wasteto-energy systems life cycle assessment was used in this thesis. This was supported by other tools such as material, substance, energy flow analysis and energy system analysis. The primary objective of this research was to provide...... a consistent framework for the environmental assessment of innovative bioenergy and waste-to-energy systems including the integration of LCA with other tools (mentioned earlier). The focus was on the following aspects: - Evaluation of potential future energy scenarios for Denmark. This was doneby integrating...... assessing the environmental performance of the waste refinery, a detailed knowledge of the waste composition is recommendable as this determines the energy outputs and thereby the assessment results. The benefits offered by the waste refinery compared with incinerators and MBT plants are primarily related...

Environmental assessment, Pinellas Plant site, Petersburg, Florida

International Nuclear Information System (INIS)

1983-07-01

The purpose of this environmental assessment is to describe the operations at the Pinellas Plant, discuss the locale in which the plant is situated and assess the actual and possible impacts of plant operation on the surrounding environment. The facility and the local environment are described; impacts on the economy, local community and the environment discussed, and alternatives presented. A comparison of the environmental impact of operating the Pinellas Plant versus the benefits gained by its operation suggests that the plant should continue its function of supplying nuclear weapons components for the US Department of Energy

Characteristics of environmental gamma-rays and dose assessment

International Nuclear Information System (INIS)

Saito, Kimiaki; Moriuchi, Shigeru

1986-01-01

Environmental radioactivity has attracted much attention in terms of exposure to the population, although its exposure doses are minimal. This paper presents problems encountered in the assessment of exposure doses using model and monitoring systems, focusing on the characteristics, such as energy distribution, direction distribution, and site, of environmental gamma-rays. The assessment of outdoor and indoor exposure doses of natural gamma-rays is discussed in relation to the shielding effect of the human body. In the assessment of artificial gamma-rays, calculation of exposure doses using build-up factor, the shielding effect of the human body, and energy dependency of the measuring instrument are covered. A continuing elucidation about uncertainties in dose assessment is emphasized. (Namekawa, K.)

Environmental impact assessment of nuclear desalination

International Nuclear Information System (INIS)

2010-03-01

Nuclear desalination is gaining interest among the IAEA Member States, as indicated by the planned projects, and it is expected that the number of nuclear desalination plants will increase in the near future. The IAEA has already provided its Member States with reports and documents that disseminate information regarding the technical and economic feasibility of nuclear desalination. With the rising environmental awareness, in the scope of IAEA's activities on seawater desalination using nuclear power, a need was identified for a report that would provide a generic assessment of the environmental issues in nuclear desalination. In order to offer an overview of specific environmental impacts which are to be expected, their probable magnitude, and recommended mitigation measures, this publication encompasses information provided by the IAEA Member States as well as other specialized sources. It is intended for decision makers and experts dealing with environmental, desalination and water management issues, offering insight into the environmental aspects that are essential in planning and developing nuclear desalination

Quartz-pebble-conglomerate gold deposits: Chapter P in Mineral deposit models for resource assessment

Science.gov (United States)

Taylor, Ryan D.; Anderson, Eric D.

2018-05-17

Quartz-pebble-conglomerate gold deposits represent the largest repository of gold on Earth, largely due to the deposits of the Witwatersrand Basin, which account for nearly 40 percent of the total gold produced throughout Earth’s history. This deposit type has had a controversial history in regards to genetic models. However, most researchers conclude that they are paleoplacer deposits that have been modified by metamorphism and hydrothermal fluid flow subsequent to initial sedimentation.The deposits are found exclusively within fault-bounded depositional basins. The periphery of these basins commonly consists of granite-greenstone terranes, classic hosts for lode gold that source the detrital material infilling the basin. The gold reefs are typically located along unconformities or, less commonly, at the top of sedimentary beds. Large quartz pebbles and heavy-mineral concentrates are found associated with the gold. Deposits that formed prior to the Great Oxidation Event (circa 2.4 giga-annum [Ga]) contain pyrite, whereas younger deposits contain iron oxides. Uranium minerals and hydrocarbons are also notable features of some deposits.Much of the gold in these types of deposits forms crystalline features that are the product of local remobilization. However, some gold grains preserve textures that are undoubtedly of detrital origin. Other heavy minerals, such as pyrite, contain growth banding that is truncated along broken margins, which indicates that they were transported into place as opposed to forming by in situ growth in a hydrothermal setting.The ore tailings associated with these deposits commonly contain uranium-rich minerals and sulfides. Oxidation of the sulfides releases sulfuric acid and mobilizes various metals into the environment. The neutralizing potential of the tailings is minimal, since carbonate minerals are rare. The continuity of the tabular ore bodies, such as those of the Witwatersrand Basin, has allowed these mines to be the deepest in

Assessing enigmatic boulder deposits in NE Aegean Sea: importance of historical sources as tool to support hydrodynamic equations

Directory of Open Access Journals (Sweden)

M. Vacchi

2012-04-01

Full Text Available Due to their importance in the assessment of coastal hazards, several studies have focused on geomorphological and sedimentological field evidence of catastrophic wave impacts related to historical tsunami events. Among them, many authors used boulder fields as important indicators of past tsunamis, especially in the Mediterranean Sea. The aim of this study was to understand the mechanism of deposition of clusters of large boulders, consisting of beachrock slabs, which were found on the southern coasts of Lesvos Island (NE Aegean Sea. Methods to infer the origin of boulder deposits (tsunami vs. storm wave are often based on hydrodynamic models even if different environmental complexities are difficult to be incorporated into numerical models. In this study, hydrodynamic equations did not provide unequivocal indication of the mechanism responsible for boulder deposition in the study area. Further analyses, ranging from geomorphologic to seismotectonic data, indicated a tsunami as the most likely cause of displacement of the boulders but still do not allow to totally exclude the extreme storm origin. Additional historical investigations (based on tsunami catalogues, historical photos and aged inhabitants interviews indicated that the boulders are likely to have been deposited by the tsunami triggered by the 6.7 M_s Chios-Karaburum earthquake of 1949 or, alternatively, by minor effects of the destructive tsunami produced by 1956's Amorgos Island earthquake. Results of this study point out that, at Mediterranean scale, to flank numerical models with the huge amount of the available historical data become a crucial tool in terms of prevention policies related to catastrophic coastal events.

[Ecological environmental quality assessment of Hangzhou urban area based on RS and GIS].

Science.gov (United States)

Xu, Pengwei; Zhao, Duo

2006-06-01

In allusion to the shortage of traditional ecological environmental quality assessment, this paper studied the spatial distribution of assessing factors at a mid-small scale, and the conversion of integer character to girding assessing cells. The main assessing factors including natural environmental condition, environmental quality, natural landscape and urbanization pressure, which were classified into four types with about eleven assessing factors, were selected from RS images and GIS-spatial analyzing environmental quality vector graph. Based on GIS, a comprehensive assessment model for the ecological environmental quality in Hangzhou urban area was established. In comparison with observed urban heat island effects, the assessment results were in good agreement with the ecological environmental quality in the urban area of Hangzhou.

Comparison of four bioindication methods for assessing the degree of environmental lead and cadmium pollution

Energy Technology Data Exchange (ETDEWEB)

Dmuchowski, Wojciech, E-mail: w.dmuchowski@obpan.pl [Botanical Garden-Center for Conservation of Biological Diversity, Polish Academy of Science, Prawdziwka 2, 02-973 Warsaw (Poland); Warsaw University of Life Sciences-SGGW, Faculty of Agriculture and Biology, 159 Nowoursynowska 159, 02-776 Warsaw (Poland); Gozdowski, Dariusz, E-mail: dariusz_gozdowski@sggw.pl [Warsaw University of Life Sciences-SGGW, Faculty of Agriculture and Biology, 159 Nowoursynowska 159, 02-776 Warsaw (Poland); Baczewska, Aneta Helena [Botanical Garden-Center for Conservation of Biological Diversity, Polish Academy of Science, Prawdziwka 2, 02-973 Warsaw (Poland)

2011-12-15

Highlights: Black-Right-Pointing-Pointer In this study we examined level of contamination in extremely heavy polluted area. Black-Right-Pointing-Pointer We examined four various bioindication methods. Black-Right-Pointing-Pointer Results were presented in pollution maps. Black-Right-Pointing-Pointer We evaluated relationships between examined bioindication methods. - Abstract: The purpose of this study was to assess the application of several bioindication methods for the monitoring of environmental pollution from Pb and Cd. The study area centered on the town of Olkusz, Poland, which is one of the oldest centers for the metallurgical industry in Europe. The assessment of environmental pollution due to metals was performed using four frequently used bioindication methods: moss-bag (Sphagnum fallax), determination of metal accumulation in Pleurozium schreberi, silver birch foliage, and Scots pine needles. The region of Olkusz, and especially the area surrounding the mining and metallurgical Boleslaw complex, was extremely contaminated with Pb and Cd. The results of the investigations are presented as contamination deposition maps. Despite the application of various methods and the resulting diversity of the specific exposure periods for different biomonitors, the spatial distribution of contamination shown on the maps was similar, as confirmed by the statistical analysis of the results.

Environmental Methods Review: Retooling Impact Assessment for the New Century

Science.gov (United States)

1998-03-01

Environmental Assessment Research Council. Netherlands, Commission for Environmental Impact Assessment. 1993. Year book of the Commission for Environmental...professional standards. Currently. the main avenues to obtain information in order to maintain or improve competence include: • journals. books ...World Wide Web • professional associations and networks such as IAIA. All of these. however. rely on using the expertise of others secondhand . Who

Environmental assessment: Industry perspective

International Nuclear Information System (INIS)

Meadley, T.

1994-01-01

The Canadian mining industry supports the concept of environmental assessment, but the current process at the time of the conference had a number of problems that the industry felt should be addressed. The author makes the following suggestions: that the process for individual projects should be separated from policy issues; that panel members should be drawn from a full-time staff; that there should be better referral criteria to determine which projects require full scale assessment including public hearings; that either the government or project opponents should participate but not both; that the financial burden on proponents should be reduced; that funding of intervenors should be controlled; that there should be a definite time frame

An investigation of environmental and sustainability discourses associated with the substantive purposes of environmental assessment

Energy Technology Data Exchange (ETDEWEB)

Rozema, Jaap G., E-mail: j.rozema@uea.ac.uk [Science, Society and Sustainability Research Group, School of Environmental Sciences, University of East Anglia (UEA), Norwich, NR4 7TJ (United Kingdom); Bond, Alan J., E-mail: alan.bond@uea.ac.uk [Science, Society and Sustainability Research Group, School of Environmental Sciences, University of East Anglia (UEA), Norwich, NR4 7TJ (United Kingdom); Cashmore, Matthew, E-mail: cashmore@plan.aau.dk [Danish Centre for Environmental Assessment, Department of Development and Planning, Aalborg University, Fibigerstraede 13, 9220 Aalborg O (Denmark); Chilvers, Jason, E-mail: jason.chilvers@uea.ac.uk [Science, Society and Sustainability Research Group, School of Environmental Sciences, University of East Anglia (UEA), Norwich, NR4 7TJ (United Kingdom)

2012-02-15

This paper investigates the discursive construction of the substantive purposes of environmental assessment (EA). It addresses these purposes by exploring the complex and often multifaceted linkages between political factors and plural views of democracy, public participation, and the role of science that are embedded in environmental and sustainability discourses. The interaction between policy-making and public actors leads to the formulation of divergent and potentially competing rationales for public participation, and for social appraisal more generally. Participatory approaches have also given impetus to the development of several interpretations on the role of science in assessment procedures. Science is important in mediating public participation and the two are therefore reciprocally linked. This leads to discourses that become manifest in the construction of substantive purposes. Discourse analysis in EA is a relevant method for examining trends and patterns in sustainable development. It is argued that public participation is an important, if not decisive, variable in the articulation and civil legitimacy of certain purposes. A general proposition that results from this paper is that EA, although typically presented as an objective scientific tool, is an intrinsically normative process. Enhanced knowledge on the construction, and reconstruction over time, of substantive purposes is required if environmental and sustainability discourses are to be used and understood as meaningful analytical instruments to assess the socio-political implications of EA. - Highlights: Black-Right-Pointing-Pointer Substantive purposes related to environmental assessment may be best analyzed through discourse analysis. Black-Right-Pointing-Pointer Environmental and sustainability discourses are contingent on the level of participatory democracy and civic science. Black-Right-Pointing-Pointer Public participation is a decisive variable in the construction of the substantive

An investigation of environmental and sustainability discourses associated with the substantive purposes of environmental assessment

International Nuclear Information System (INIS)

Rozema, Jaap G.; Bond, Alan J.; Cashmore, Matthew; Chilvers, Jason

2012-01-01

This paper investigates the discursive construction of the substantive purposes of environmental assessment (EA). It addresses these purposes by exploring the complex and often multifaceted linkages between political factors and plural views of democracy, public participation, and the role of science that are embedded in environmental and sustainability discourses. The interaction between policy-making and public actors leads to the formulation of divergent and potentially competing rationales for public participation, and for social appraisal more generally. Participatory approaches have also given impetus to the development of several interpretations on the role of science in assessment procedures. Science is important in mediating public participation and the two are therefore reciprocally linked. This leads to discourses that become manifest in the construction of substantive purposes. Discourse analysis in EA is a relevant method for examining trends and patterns in sustainable development. It is argued that public participation is an important, if not decisive, variable in the articulation and civil legitimacy of certain purposes. A general proposition that results from this paper is that EA, although typically presented as an objective scientific tool, is an intrinsically normative process. Enhanced knowledge on the construction, and reconstruction over time, of substantive purposes is required if environmental and sustainability discourses are to be used and understood as meaningful analytical instruments to assess the socio-political implications of EA. - Highlights: ► Substantive purposes related to environmental assessment may be best analyzed through discourse analysis. ► Environmental and sustainability discourses are contingent on the level of participatory democracy and civic science. ► Public participation is a decisive variable in the construction of the substantive purpose of environmental assessment.

Assessment of heavy metal pollution from a Fe-smelting plant in urban river sediments using environmental magnetic and geochemical methods

Energy Technology Data Exchange (ETDEWEB)

Zhang Chunxia, E-mail: cxzhang@mail.iggcas.ac.cn [State Key Laboratory of Lithospheric Evolution, Institute of Geology and Geophysics, Chinese Academy of Sciences, No. 19 Bei Tucheng Xilu, Chaoyang Dist., Beijing 100029 (China); Qiao Qingqing [State Key Laboratory of Lithospheric Evolution, Institute of Geology and Geophysics, Chinese Academy of Sciences, No. 19 Bei Tucheng Xilu, Chaoyang Dist., Beijing 100029 (China); Piper, John D.A. [Geomagnetism Laboratory, Department of Earth and Ocean Science, University of Liverpool, Liverpool L69 7ZE (United Kingdom); Huang, Baochun [State Key Laboratory of Lithospheric Evolution, Institute of Geology and Geophysics, Chinese Academy of Sciences, No. 19 Bei Tucheng Xilu, Chaoyang Dist., Beijing 100029 (China)

2011-10-15

Environmental magnetic proxies provide a rapid means of assessing the degree of industrial heavy metal pollution in soils and sediments. To test the efficiency of magnetic methods for detecting contaminates from a Fe-smelting plant in Loudi City, Hunan Province (China) we investigated river sediments from Lianshui River. Both magnetic and non-magnetic (microscopic, chemical and statistical) methods were used to characterize these sediments. Anthropogenic heavy metals coexist with coarse-grained magnetic spherules. It can be demonstrated that the Pollution Load Index of industrial heavy metals (Fe, V, Cr, Mo, Zn, Pb, Cd, Cu) and the logarithm of saturation isothermal remanent magnetization, a proxy for magnetic concentration, are significantly correlated. The distribution heavy metal pollution in the Lianshui River is controlled by surface water transport and deposition. Our findings demonstrate that magnetic methods have a useful and practical application for detecting and mapping pollution in and around modern industrial cities. - Highlights: > Assessment of heavy metal (HM) pollution in river sediment using magnetic and chemical methods. > HMs from an Fe-smelting plant coexist with coarse-grained magnetic spherules. > A linear correlation between the Pollution Load Index (PLI) of industrial HMs and a magnetic concentration parameter is demonstrated. > The distribution of HM pollution in river sediments is controlled by surface water flow and deposition. - Heavy metal (HM) contamination of river sediments from industrial input by surface water transport and deposition can be detected by using magnetic methods providing a convenient assessment of HM pollution in industrialized cities.

Graphical Methodology of Global Pollution Index for the Environmental Impact Assessment Using Two Environmental Components

Directory of Open Access Journals (Sweden)

Corneliu Cojocaru

2017-04-01

Full Text Available One of the applied methods for environmental impact assessment is the index of global pollution (IGP proposed by Rojanschi in 1991. This methodology enables the global estimation for the ecosystem state affected more or less by human activities. Unfortunately, Rojanschi’s method has a limitation; it can be applied only if at least three environmental components are considered. Frequently, many environmental impact assessment applications rely on analysis of only two environmental components. Therefore, this work aimed to develop a new graphical method to extend Rojanschi’s approach for the case of two environmental components. The proposed method avoids the average value of evaluation grades and uses only the graphical correspondence for calculation of the index of global pollution. A right-angle triangle graph methodology was proposed, where bases represented the values of evaluation grades. Thus, for the case of two environmental components, the index of global pollution was calculated as the relation between the ideal and real ecosystem states represented by the ratio between areas of external and enclosed right triangles. The developed graphical method was tested and validated for real case studies: the environmental impact assessment from a refinery located on the Romanian Black Sea Coast considering Air and Water environmental components and from a coal-fired thermoelectric power plant from Eastern Romania regarding Air and Soil environmental components. In this way, it was provided a reliable and faster tool to be used for the pollution characterization of human-derived chemicals for better decisions in risk management.

Model of environmental life cycle assessment for coal mining operations.

Science.gov (United States)

Burchart-Korol, Dorota; Fugiel, Agata; Czaplicka-Kolarz, Krystyna; Turek, Marian

2016-08-15

This paper presents a novel approach to environmental assessment of coal mining operations, which enables assessment of the factors that are both directly and indirectly affecting the environment and are associated with the production of raw materials and energy used in processes. The primary novelty of the paper is the development of a computational environmental life cycle assessment (LCA) model for coal mining operations and the application of the model for coal mining operations in Poland. The LCA model enables the assessment of environmental indicators for all identified unit processes in hard coal mines with the life cycle approach. The proposed model enables the assessment of greenhouse gas emissions (GHGs) based on the IPCC method and the assessment of damage categories, such as human health, ecosystems and resources based on the ReCiPe method. The model enables the assessment of GHGs for hard coal mining operations in three time frames: 20, 100 and 500years. The model was used to evaluate the coal mines in Poland. It was demonstrated that the largest environmental impacts in damage categories were associated with the use of fossil fuels, methane emissions and the use of electricity, processing of wastes, heat, and steel supports. It was concluded that an environmental assessment of coal mining operations, apart from direct influence from processing waste, methane emissions and drainage water, should include the use of electricity, heat and steel, particularly for steel supports. Because the model allows the comparison of environmental impact assessment for various unit processes, it can be used for all hard coal mines, not only in Poland but also in the world. This development is an important step forward in the study of the impacts of fossil fuels on the environment with the potential to mitigate the impact of the coal industry on the environment. Copyright © 2016 Elsevier B.V. All rights reserved.

Increased Arctic Deposition of Persistent Compounds as a Result of the Montreal Protocol

Science.gov (United States)

Young, C.; Pickard, H. M.; De Silva, A. O.; Spencer, C.; Criscitiello, A. S.; Muir, D.; Sharp, M. J.

2017-12-01

Perfluorocarboxylic acids (PFCAs) are among the diverse groups of compounds characterized as persistent organic pollutants. They are toxic, resistant to environmental degradation, and adversely impact human and environmental health. PFCAs with four or fewer carbons, short-chain PFCAs (scPFCAs), are of particular interest because of their increasing levels in the environment, toxicity to plants, and potential for accumulation in some aquatic ecosystems, making them an emerging environmental concern. A minor source of scPFCAs to the Arctic has been shown to be atmospheric transformation of fluoropolymer precursors, followed by deposition. Additional potential sources of scPFCAs to the Arctic are chlorofluorocarbon (CFC)-replacement compounds. Through analysis of an ice core from the Canadian High Arctic, we show that Montreal Protocol-mandated introduction of CFC-replacement compounds for the heat-transfer industry has led to increasing inputs of these scPFCAs to the remote environment. Flux measurements for scPFCAs as a class of contaminants have only been reported in a couple studies to date. Here, we provide the first multi-decadal temporal record of scPFCA deposition, demonstrating a dramatic increase in deposition resulting from emission of CFC-replacements. These results bring to the forefront a need for a holistic approach to environmental risk assessment that considers impacts of replacement substances and degradation products.

Assessing the risk of nitrogen deposition to natural resources in the Four Corners area

Science.gov (United States)

Reed, Sasha C.; Belnap, Jayne; Floyd-Hanna, Lisa; Crews, Tim; Herring, Jack; Hanna, Dave; Miller, Mark E.; Duniway, Michael C.; Roybal, Carla M.

2013-01-01

Nitrogen (N) deposition in the western U.S. is on the rise and is already dramatically affecting terrestrial ecosystems. For example, N deposition has repeatedly been shown to lower air and water quality, increase greenhouse gas emissions, alter plant community composition, and significantly modify fire regimes. Accordingly, the effects of N deposition represent one of our largest environmental challenges and make difficult the National Park Service’s (NPS) important mission to “preserve the scenery and the natural and historic objects and the wildlife… unimpaired for the enjoyment of future generations”. Due to increased population growth and energy development (e.g., natural gas wells), the Four Corners region has become a notable ‘hotspot’ for N deposition. However, our understanding of how increased N deposition will affect these unique ecosystems, as well as how much deposition is actually occurring, remains notably poor. Here we used a multi-disciplinary approach to gathering information in an effort to help NPS safeguard the Four Corners national parks, both now and into the future. We applied modeling, field, and laboratory techniques to clarify current N deposition gradients and to help elucidate the ecosystem consequences of N deposition to the national parks of the Four Corners area. Our results suggest that NOx deposition does indeed represent a significant source of N to Mesa Verde National Park and, as expected, N deposition significantly affects coupled biogeochemical cycling (N, carbon, and phosphorus) of these landscapes. We also found some surprising results. For example, perhaps due to the low nutrient availability in these (and other) dryland ecosystems, although most other research suggests that adding N reduces N fixation rates, N additions did not consistently reduce natural N inputs via biological N2 fixation at our dryland sites. While the timeline of this pilot project is too brief to elucidate all the potential insight from

Determining Vulnerability Importance in Environmental Impact Assessment

International Nuclear Information System (INIS)

Toro, Javier; Duarte, Oscar; Requena, Ignacio; Zamorano, Montserrat

2012-01-01

The concept of vulnerability has been used to describe the susceptibility of physical, biotic, and social systems to harm or hazard. In this sense, it is a tool that reduces the uncertainties of Environmental Impact Assessment (EIA) since it does not depend exclusively on the value assessments of the evaluator, but rather is based on the environmental state indicators of the site where the projects or activities are being carried out. The concept of vulnerability thus reduces the possibility that evaluators will subjectively interpret results, and be influenced by outside interests and pressures during projects. However, up until now, EIA has been hindered by a lack of effective methods. This research study analyzes the concept of vulnerability, defines Vulnerability Importance and proposes its inclusion in qualitative EIA methodology. The method used to quantify Vulnerability Importance is based on a set of environmental factors and indicators that provide a comprehensive overview of the environmental state. The results obtained in Colombia highlight the usefulness and objectivity of this method since there is a direct relation between this value and the environmental state of the departments analyzed. - Research Highlights: ► The concept of vulnerability could be considered defining Vulnerability Importance included in qualitative EIA methodology. ► The use of the concept of environmental vulnerability could reduce the subjectivity of qualitative methods of EIA. ► A method to quantify the Vulnerability Importance proposed provides a comprehensive overview of the environmental state. ► Results in Colombia highlight the usefulness and objectivity of this method.

Assessing the wider environmental value of remediating land contamination

NARCIS (Netherlands)

Bardos, R.P.; Kearney, T.E.; Nathanail, C.P.; Weenk, A.; Martin, I.D.

2000-01-01

The aim of this paper is to consider qualitative and quantitative approaches for assessing the wider environmental value of remediating land contamination. In terms of the environmental element of sustainable development, a remediation project's overall environmental performance is the sum of the

Proposing an Environmental Excellence Self-Assessment Model

DEFF Research Database (Denmark)

Meulengracht Jensen, Peter; Johansen, John; Wæhrens, Brian Vejrum

2013-01-01

that the EEA model can be used in global organizations to differentiate environmental efforts depending on the maturity stage of the individual sites. Furthermore, the model can be used to support the decision-making process regarding when organizations should embark on more complex environmental efforts......This paper presents an Environmental Excellence Self-Assessment (EEA) model based on the structure of the European Foundation of Quality Management Business Excellence Framework. Four theoretical scenarios for deploying the model are presented as well as managerial implications, suggesting...

Risk and environmental impact assessment: nuclear and environmental licensing interface

International Nuclear Information System (INIS)

Costa, Eduardo M.; Monteiro, Iara A.

1997-01-01

The main aims of this paper are the identification and discussion of interfaces and application of common concepts in the existing nuclear and environmental licensing procedures. Risk and impact assessment of nuclear electricity generation are two of these concepts which are discussed detail. The risk concept, which had initially focused on engineering projects, has been extended to many other areas of human activity. Risk resulting from the use of ionization radiation has been associated to the dose for the critical members of the public. Therefore, radiation protection applies basic dose limits which are established in national and international recommendations. These recommendations are increasing the emphasis to keep all the exposures to ionizing radiation as low as reasonable achievable, economical and social factors being taken into account. On the other hand, environmental impact assessment has been used as a tool in planning and decision-making processes, thus including environmental concern in the discussion of social and economical development strategies. This paper aims to discuss the association of these two concepts by presenting the procedures of control of radiological impact during normal operation of a nuclear power plant and the various forms of risk communication to the public in the case of events occurrence. (author). 13 refs

Significance of relic carbonate deposits along the central and southwestern margin of India for late Quaternary environmental and sea level changes

Digital Repository Service at National Institute of Oceanography (India)

Rao, V.P.; Montaggioni, L.; Vora, K.H.; Almeida, F.; Rao, K.M.; Rajagopalan, G.

Environmental and sea level indicators were investigated using dredge samples from late Quaternary carbonate deposits along the shelf break between Goa and Cape Comorin, India. Geomorphic features in the area were identified from sonar profiles...

Citizen involvement in sustainability-centred environmental assessment follow-up

International Nuclear Information System (INIS)

Hunsberger, Carol A.; Gibson, Robert B.; Wismer, Susan K.

2005-01-01

In Canada, many project proponents and planners in the public and private sectors are required to forecast and minimize the adverse environmental effects of their undertakings. However, environmental assessments have traditionally been weak in the areas of planning and conducting effective monitoring, encouraging public participation, integrating social and ecological considerations, encouraging environmental rehabilitation and enhancement, and examining cumulative effects of multiple projects. This paper attempts to address these deficiencies together by drawing from theory and practice in citizen-based monitoring, in the interests of sustainable livelihoods, using local knowledge. Informed by case study research in several regions of Canada, the discussion focuses on opportunities for using citizen-based approaches to broad and continuing regional monitoring as a foundation for the project-centred work that is the usual concern of environmental assessment follow-up. Such approaches have advantages beyond the usual expectations of project-centred monitoring and beyond the conventional arguments for increasing local involvement in environmental assessments. However, there are also challenges including those of integrating local and conventional (or scientific) knowledge systems, addressing concerns about the credibility and biases of citizens and project proponents, ensuring attention to broader sustainability goals such as increased stewardship and civility, and developing practical ways of coordinating and funding integrated and participatory monitoring programs. The concluding recommendations call for a dramatically different approach to follow-up activities on the part of private and public project proponents, as well as novel thinking for environmental assessment practitioners

Environmental sustainability assessment of palm biodiesel production in Thailand

International Nuclear Information System (INIS)

Silalertruksa, Thapat; Gheewala, Shabbir H.

2012-01-01

The study assesses the environmental sustainability of palm biodiesel production systems in Thailand by focusing on their energy efficiency and environmental impact potentials. The Net Energy Balance (NEB) and Renewability indicate energy gain for palm biodiesel and its co-products as compared to fossil energy inputs. In addition, life cycle assessment also reveals lower values of environmental impact potentials of biodiesel as compared to conventional diesel. For example, palm biodiesel can provide greenhouse gas (GHG) reduction of around 46–73% as compared to diesel. Nitrogen-fertilizer production and application in the plantation and the air emissions from the ponds treating palm oil mill effluent (POME) are found to be the major environmental aspects. However, the energy and environmental performances depend on various factors such as the management efficiency of empty fruit bunches (EFB) and POME and the possible land-use change in the future. Recommendations are made for improving environmental performance of palm biodiesel and for securing the long-term availability of crude palm oil supply with a view towards sustainable palm biodiesel production. -- Highlights: ► Environmental sustainability of palm biodiesel production in Thailand is assessed. ► Palm biodiesel can provide GHG reduction of around 46–73% as compared to diesel. ► Net energy ratio and renewability of palm biodiesel both range between 2 and 4. ► Efficient use of by-products in the value chain enhances environmental benefits.

Draft environmental assessment: Ocean Thermal Energy Conversion (OTEC) Pilot Plants

Energy Technology Data Exchange (ETDEWEB)

Sullivan, S.M.; Sands, M.D.; Donat, J.R.; Jepsen, P.; Smookler, M.; Villa, J.F.

1981-02-01

This Environmental Assessment (EA) has been prepared, in accordance with the National Environmental Policy Act of 1969, for the deployment and operation of a commercial 40-Megawatt (MW) Ocean Thermal Energy Conversion (OTEC) Pilot Plant (hereafter called the Pilot Plant). A description of the proposed action is presented, and a generic environment typical of the candidate Pilot Plant siting regions is described. An assessment of the potential environmental impacts associated with the proposed action is given, and the risk of credible accidents and mitigating measures to reduce these risks are considered. The Federal and State plans and policies the proposed action will encompass are described. Alternatives to the proposed action are presented. Appendix A presents the navigation and environmental information contained in the US Coast Pilot for each of the candidate sites; Appendix B provides a brief description of the methods and calculations used in the EA. It is concluded that environmental disturbances associated with Pilot Plant activities could potentially cause significant environmental impacts; however, the magnitude of these potential impacts cannot presently be assessed, due to insufficient engineering and environmental information. A site- and design-specific OTEC Pilot Plant Environmental Impact Statement (EIS) is required to resolve the potentially significant environmental effects associated with Pilot Plant deployment and operation. (WHK)

In-flight monitoring of particle deposition in the environmental control systems of commercial airliners in China

Science.gov (United States)

Cao, Qing; Xu, Qiuyu; Liu, Wei; Lin, Chao-Hsin; Wei, Daniel; Baughcum, Steven; Norris, Sharon; Chen, Qingyan

2017-04-01

Severe air pollution and low on-time performance of commercial flights in China could increase particle deposition in the environmental control systems (ECSs) of commercial airliners. The particles deposited in the ECSs could negatively affect the performance of the airplanes. In addition, particles that penetrate into the aircraft cabin could adversely impact the health of passengers and crew members. This investigation conducted simultaneous measurements of particle mass concentration and size distribution inside and outside the cabin during 64 commercial flights of Boeing 737 and Airbus 320 aircraft departing from or arriving at Tianjin Airport in China. The results showed that the PM2.5 mass concentration deposition in the ECSs of these airplanes ranged from 50% to 90%, which was much higher than that measured in an airplane with a ground air-conditioning unit. The average deposition rates of particles with diameters of 0.5-1 μm, 1-2 μm, 2-5 μm, 5-10 μm, and >10 μm were 89 ± 8%, 85 ± 13%, 80 ± 13%, 73 ± 15%, and 80 ± 14%, respectively. The in-flight measurement results indicated that the particle concentration in the breathing zone was higher than that in the air-supply zone, which implies a significant contribution by particles in the interior of the cabin. Such particles come from human emissions or particle resuspension from interior surfaces.

Modern biogeochemistry environmental risk assessment

CERN Document Server

Bashkin, Vladimir N

2006-01-01

Most books deal mainly with various technical aspects of ERA description and calculationsAims at generalizing the modern ideas of both biogeochemical and environmental risk assessment during recent yearsAims at supplementing the existing books by providing a modern understanding of mechanisms that are responsible for the ecological risk for human beings and ecosystem

Environmental impact assessment around TRIGA research reactor

International Nuclear Information System (INIS)

Lee, Jeong Ho; Lee, Hyun Duk; Lee, Young Bok; Cheong, Kyu Hoi; Ahn, Jong Sung; Kim, Kug Chan; You, Byung Sun; Kim, Byung Woo; Kim, Sang Bok; Han Moon Hee

1985-01-01

Population distribution, atmospheric change, X/Q, characteristics of terrestrial ecosystem around Seoul site were surveyed. Environmental radiation and radioactivities such as grossα, grossβ, Cs-137, Sr-90 and H-3 of various environmental samples were analyzed. The values of environmental radiation dose tended to increase gradually in the light of the recent five years' results of environmental radiation monitoring around the nuclear power plants from 1980 to 1984, however, the changes were not significant. In addition, continuous assessment of environmental radiation monitoring on the roofs of main building and life science building at KAERI showed that the environmental radiation dose tended to increase a little during the night time. Judging from the above results, it is concluded that environmental contamination level by radioactive materials could be ignored in the case of radioisotope production or experiment using radioisotopes except the release of gaseous radioactive materials such as Ar-41 of short half life by the operation of nuclear reactor. (Author)

Environmental-impact assessment of dams and reservoir projects (review and a case study)

International Nuclear Information System (INIS)

Shah, S.M.

2009-01-01

Dams and reservoirs are among one of the most sensitive of all development Project, in terms of pervasiveness of their influence in altering the environmental conditions and resources. In the present study, major dams and reservoir projects are reviewed, from the environmental point of view. Dams and Reservoir projects bring about major changes in the immediate environment, thus affecting public health, settlements, farmlands, roads and historical sites. Impacts on human population and wildlife may be profound. Tropical diseases, involving fresh-water hosts or vectors in their transmission, are often common around new reservoirs. Large lakes create limnological changes, excessive evaporation, seepage, disturbance in water-table and increased tendencies of landslides and earthquakes. Micro climatic changes are possible, such as fog formation, increased cloudiness and modified rainfall-patterns. Retention of sediment results in silting up of reservoirs. Water shortages on mountain rivers may leave unsightly dry river-beds below a dam. Sediment deposition and growth of vegetation in reservoir affects the water-extraction for navigation power-generation and fishing. Various dams and reservoir projects in the world are critically studied, in terms of creating environmental impacts. The Kala Bagh Dam project (Pakistan), which is ready for construction, has been analysed as a case study, by matrix method. Analyses show that adverse effects of this dam are less than the benefits. It is recommended that based on the experience, appropriate lines and strategies may be drawn up to evaluate the local projects. Multidisciplinary experts need to be involved, for assessing environmental impacts and suggesting mitigation measures, to combat the adverse effects. (author)

Marine environmental impact assessment of abalone, Haliotis discus hannai, cage farm in Wan-do, Republic of Korea

Science.gov (United States)

Oh, Hyun-Taik; Jung, Rae-Hong; Cho, Yoon-Sik; Hwang, Dong-Woon; Yi, Yong-Min

2015-12-01

To assess the marine environmental impacts of abalone, Haliotis discus hannai, cage farms in Wan-do, we monitored the benthic environment on top of the sediment underneath cage farm stations and reference stations. We applied two methods for this assessment. One was the A- and B-investigation of the MOM system (Modeling-On fish farm-Monitoring) developed in Norway. The other was a general environmental monitoring method which is widely used. In this study, we found benthic animals in all samples that belonged to condition 1 which were based on group 1(presence of macrofauna) of the B-investigation method. The values of redox potential (group 2-pH, redox potential) in all samples were above +65 mV belonging to condition 1. Based on sensory results (group 3-gas, color, odor, thickness of deposits), five out of seven experiment samples showed condition 1 while stations 2 and 7 showed condition 2, which have been cultured for 10 years in semi-closed waters. As group 2 takes precedence over group 3, the level of the conditions for B-investigation results consequently showed condition 1 in all stations. We found that pollutants and trace metals in the sediment underneath cage farms were lower than the pollution standard. This led us to conclude that the environmental impacts of the cage farms in this study were not significant.

Assessing environmental impacts in a life cycle perspective

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky

2005-01-01

is focused on the product system which comprises all the processes which the product and its components meet throughout their lives- from the extraction of raw materials via manufacture, use and waste management to final disposal, or in short from the cradle to the grave (see Figure 1). The focus......What are the environmental impacts from an armchairor a cellular phone or a steak, if you take into account all the activities needed to produce, maintain, use or consume and eventually dispose of it? Life cycle impact assessment is the part of life cycle assessment (LCA) where the inventory...... of material flows in the life cycle of a product are translated into environmental impacts and consumption of resources, and questions like these are given an answer. The environmental impacts may range from very local (e.g. land use) to global (like climate change). As an environmental analysis tool, LCA...

Environmental site assessments should include radon gas testing

International Nuclear Information System (INIS)

Nardi, M.A.

1991-01-01

There are two emerging influences that will require radon gas testing as part of many property transfers and most site assessments. These requirements come from lending regulators and state legislatures. Fannie Mae and others have developed environmental investigation guidelines for the purchase of environmentally contaminated real estate. These guidelines include radon gas testing for many properties. Several states have enacted laws that require environmental disclosure forms be prepared to ensure that the parties involved in certain real estate transactions are aware of the environmental liabilities that may come with the transfer of property. Indiana has recently enacted legislation that would require the disclosure of the presence of radon gas on many commercial real estate transactions. With more lenders and state governments likely to follow this trend, radon gas testing should be performed during all property transfers and site assessment to protect the parties involved from any legal liabilities

Jabiluka environmental studies

Energy Technology Data Exchange (ETDEWEB)

Morley, A.W.; Koontz, D.V.; Sanderson, N.T. (Pancontinental Mining Ltd., Sydney (Australia))

1984-02-01

Environmental baseline studies associated with development of the Jabiluka uranium deposits are described. Some basic characteristics of the area local to the deposits are reported and a brief explanation is provided of the nature of, and philosophy behind the environmental studies. The major findings from this program are discussed.

Radiation environmental impact assessment of the radioisotope's application on nuclear medical science

International Nuclear Information System (INIS)

Liu Hongshi

2004-01-01

The radiation environmental impact assessment of the radioisotope's application on nuclear medical science is introduced, including the assessment criteria, the assessment methods and the environmental impact assessment of three wastes emission. (authors)

The screening and scoping of Environmental Impact Assessment and Strategic Environmental Assessment of Carbon Capture and Storage in the Netherlands

International Nuclear Information System (INIS)

Koornneef, Joris; Faaij, Andre; Turkenburg, Wim

2008-01-01

The Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are procedural tools which have as goal to assess and evaluate possible environmental effects of, respectively, a proposed project or policy plan. The goal of this article is to explore possible bottlenecks in applying both the EIA and SEA procedures on Carbon Capture and Storage (CCS) activities in the Netherlands, as experience is currently minimal or lacking. In this study we focus mainly on the institutional and procedural aspects of the screening and scoping phases of both procedures. This is achieved by reviewing EIA and SEA procedures for analogue projects for the three distinctive process steps of a CCS project, namely the power plant with capture, the transport and finally the underground storage of the CO 2 . Additionally, EIA and SEA or similar procedures on CCS in other countries are reviewed and the legal framework for the Dutch EIA and SEA is studied. This article shows a concise overview of the EIA and SEA procedure in the Netherlands and the relation between both procedures. Based on our findings we have constructed a conceptual taxonomy for the scope of both procedures for CCS in the Netherlands. This taxonomy conceptualizes the possible integration of assessing the environmental impacts for tiered levels of decision making. This integration might be needed for first CCS projects as decisions on the strategic (spatial planning) level are currently absent for CCS in the Netherlands. Perpendicular to such integration is the integration of linked activities in the CCS chain and their alternatives, into one procedure. We argue that it would be beneficial to combine the separate EIA procedures for CCS activities into one procedure or at least provide close linkage between them. This issue should be carefully considered by regulators, competent authorities and project initiators in an early stage to avoid delaying legal procedures in the future. For the same reason

Using Art to Assess Environmental Education Outcomes

Science.gov (United States)

Flowers, Ami A.; Carroll, John P.; Green, Gary T.; Larson, Lincoln R.

2015-01-01

Construction of developmentally appropriate tools for assessing the environmental attitudes and awareness of young learners has proven to be challenging. Art-based assessments that encourage creativity and accommodate different modes of expression may be a particularly useful complement to conventional tools (e.g. surveys), but their efficacy and…

New technologies - How to assess environmental effects

Science.gov (United States)

Sullivan, P. J.; Lavin, M. L.

1981-01-01

A method is provided for assessing the environmental effects of a room-and-pillar mining system (RP) and a new hydraulic borehole mining system (HBM). Before environmental assessment can begin, each technology is defined in terms of its engineering characteristics at both the conceptual and preliminary design stages. The mining sites are also described in order to identify the significant advantages and constraints for each system. This can be a basic physical and biological survey of the region at the conceptual stage, but a more specific representation of site characteristics is required at the preliminary stage. Assessment of potential environmental effects of each system at the conceptual design is critical to its hardware development and application. A checklist can be used to compare and identify the negative impacts of each method, outlining the resource affected, the type of impact involved, and the exact activity causing that impact. At the preliminary design stage, these impacts should be evaluated as a result of either utilization or alteration. Underground coal mining systems have three major utilization impacts - the total area disturbed, the total water resources withdrawn from other uses, and the overall energy efficiency of the process - and one major alteration impact - the degradation of water quality by sedimentation and acid contamination. A comparison of the RP and HBM systems shows the HBM to be an environmentally less desirable system for the Central Appalachia region.

Critical factors in environmental impact assessment

International Nuclear Information System (INIS)

Creasey, R.

1999-01-01

Environmental impact assessment (EIA) has shown that it is of proven benefit to the overall planning and environmental management of resource development projects, but certain elements within the application and practice of EIA remain problematic for proponents and regulatory decision makers alike. The use of the word 'critical' in the title of this paper suggests that if the components identified are not considered or implemented properly through the process of EIA, the product will be of less value to both the proponent and decision maker. In the context of EIA, the regulatory, financial, legal and social benefits that accrue make the need for good EIA practice even more imperative. A discussion is included that highlights a number of issues that need to be addressed to improve the effectiveness of EIA, a tool necessary to attaining provincial and federal regulatory approvals. To a large extent, the discussion reflects items of contemporary public concern, and those emerging issues of the scientific and regulatory community. At the same time, it needs to be realized that not all the identified items are necessarily new to the practice of impact assessment, but are nonetheless important to professional environmental impact assessment and decision making. Insight is also provided into the direction of decision making of the Energy and Utilities Board as it will affect the regulatory review and administration of resource development projects in the province of Alberta. 16 refs

The Contribution of Project Environmental Assessment to Assessing and Managing Cumulative Effects: Individually and Collectively Insignificant?

Science.gov (United States)

Noble, Bram; Liu, Jialang; Hackett, Paul

2017-04-01

This paper explores the opportunities and constraints to project-based environmental assessment as a means to support the assessment and management of cumulative environmental effects. A case study of the hydroelectric sector is used to determine whether sufficient information is available over time through project-by-project assessments to support an adequate understanding of cumulative change. Results show inconsistency from one project to the next in terms of the components and indicators assessed, limited transfer of baseline information between project assessments over time, and the same issues and concerns being raised by review panels-even though the projects reviewed are operating in the same watershed and operated by the same proponent. Project environmental assessments must be managed, and coordinated, as part of a larger system of impact assessment, if project-by-project assessments are to provide a meaningful forum for learning and understanding cumulative change. The paper concludes with recommendations for improved project-based assessment practice in support of cumulative effects assessment and management.

Formerly Utilized Sites Remedial Action Program environmental compliance assessment checklists

Energy Technology Data Exchange (ETDEWEB)

Levine, M.B.; Sigmon, C.F.

1989-09-29

The purpose of the Environmental Compliance Assessment Program is to assess the compliance of Formerly Utilized Site Remedial Action Program (FUSRAP) sites with applicable environmental regulations and Department of Energy (DOE) Orders. The mission is to identify, assess, and decontaminate sites utilized during the 1940s, 1950s, and 1960s to process and store uranium and thorium ores in support of the Manhattan Engineer District and the Atomic Energy Commission. To conduct the FUSRAP environmental compliance assessment, checklists were developed that outline audit procedures to determine the compliance status of the site. The checklists are divided in four groups to correspond to these regulatory areas: Hazardous Waste Management, PCB Management, Air Emissions, and Water Discharges.

Formerly Utilized Sites Remedial Action Program environmental compliance assessment checklists

International Nuclear Information System (INIS)

Levine, M.B.; Sigmon, C.F.

1989-01-01

The purpose of the Environmental Compliance Assessment Program is to assess the compliance of Formerly Utilized Site Remedial Action Program (FUSRAP) sites with applicable environmental regulations and Department of Energy (DOE) Orders. The mission is to identify, assess, and decontaminate sites utilized during the 1940s, 1950s, and 1960s to process and store uranium and thorium ores in support of the Manhattan Engineer District and the Atomic Energy Commission. To conduct the FUSRAP environmental compliance assessment, checklists were developed that outline audit procedures to determine the compliance status of the site. The checklists are divided in four groups to correspond to these regulatory areas: Hazardous Waste Management, PCB Management, Air Emissions, and Water Discharges

Environmental Monitoring and Assessment Program (EMAP) National Coastal Database

Data.gov (United States)

U.S. Environmental Protection Agency — The Environmental Monitoring and Assessment Program (EMAP) National Coastal Database contains estuarine and coastal data that EMAP and Regional-EMAP have collected...

Radiological assessment. A textbook on environmental dose analysis

Energy Technology Data Exchange (ETDEWEB)

Till, J.E.; Meyer, H.R. (eds.)

1983-09-01

Radiological assessment is the quantitative process of estimating the consequences to humans resulting from the release of radionuclides to the biosphere. It is a multidisciplinary subject requiring the expertise of a number of individuals in order to predict source terms, describe environmental transport, calculate internal and external dose, and extrapolate dose to health effects. Up to this time there has been available no comprehensive book describing, on a uniform and comprehensive level, the techniques and models used in radiological assessment. Radiological Assessment is based on material presented at the 1980 Health Physics Society Summer School held in Seattle, Washington. The material has been expanded and edited to make it comprehensive in scope and useful as a text. Topics covered include (1) source terms for nuclear facilities and Medical and Industrial sites; (2) transport of radionuclides in the atmosphere; (3) transport of radionuclides in surface waters; (4) transport of radionuclides in groundwater; (5) terrestrial and aquatic food chain pathways; (6) reference man; a system for internal dose calculations; (7) internal dosimetry; (8) external dosimetry; (9) models for special-case radionuclides; (10) calculation of health effects in irradiated populations; (11) evaluation of uncertainties in environmental radiological assessment models; (12) regulatory standards for environmental releases of radionuclides; (13) development of computer codes for radiological assessment; and (14) assessment of accidental releases of radionuclides.

Radiological assessment. A textbook on environmental dose analysis

International Nuclear Information System (INIS)

Till, J.E.; Meyer, H.R.

1983-09-01

Radiological assessment is the quantitative process of estimating the consequences to humans resulting from the release of radionuclides to the biosphere. It is a multidisciplinary subject requiring the expertise of a number of individuals in order to predict source terms, describe environmental transport, calculate internal and external dose, and extrapolate dose to health effects. Up to this time there has been available no comprehensive book describing, on a uniform and comprehensive level, the techniques and models used in radiological assessment. Radiological Assessment is based on material presented at the 1980 Health Physics Society Summer School held in Seattle, Washington. The material has been expanded and edited to make it comprehensive in scope and useful as a text. Topics covered include (1) source terms for nuclear facilities and Medical and Industrial sites; (2) transport of radionuclides in the atmosphere; (3) transport of radionuclides in surface waters; (4) transport of radionuclides in groundwater; (5) terrestrial and aquatic food chain pathways; (6) reference man; a system for internal dose calculations; (7) internal dosimetry; (8) external dosimetry; (9) models for special-case radionuclides; (10) calculation of health effects in irradiated populations; (11) evaluation of uncertainties in environmental radiological assessment models; (12) regulatory standards for environmental releases of radionuclides; (13) development of computer codes for radiological assessment; and (14) assessment of accidental releases of radionuclides

Environmental impact assessment based on planning support system

NARCIS (Netherlands)

Carsjens, G.J.; Chen, W.

2011-01-01

How to assess environmental impact is one of the keys in land use planning. This article described in detail the concepts of activities, impact zones, functions, and sensitivities, as well as the development of STEPP (strategic tool for integrating environmental aspects in planning procedures) based

A comprehensive environmental impact assessment method for shale gas development

Directory of Open Access Journals (Sweden)

Renjin Sun

2015-03-01

Full Text Available The great success of US commercial shale gas exploitation stimulates the shale gas development in China, subsequently, the corresponding supporting policies were issued in the 12th Five-Year Plan. But from the experience in the US shale gas development, we know that the resulted environmental threats are always an unavoidable issue, but no uniform and standard evaluation system has yet been set up in China. The comprehensive environment refers to the combination of natural ecological environment and external macro-environment. In view of this, we conducted a series of studies on how to set up a comprehensive environmental impact assessment system as well as the related evaluation methodology and models. First, we made an in-depth investigation into shale gas development procedures and any possible environmental impacts, and then compared, screened and modified environmental impact assessment methods for shale gas development. Also, we established an evaluating system and assessment models according to different status of the above two types of environment: the correlation matrix method was employed to assess the impacts on natural ecological environment and the optimization distance method was modified to evaluate the impacts on external macro-environment. Finally, we substitute the two subindexes into the comprehensive environmental impact assessment model and achieved the final numerical result of environmental impact assessment. This model can be used to evaluate if a shale gas project has any impact on environment, compare the impacts before and after a shale gas development project, or the impacts of different projects.

Environmental assessment of Swedish agriculture

International Nuclear Information System (INIS)

Engstroem, Rebecka; Finnveden, Goeran; Wadeskog, Anders

2007-01-01

This article describes an environmental assessment of Swedish agriculture, including upstream and downstream effects. The analysis is based on environmentally extended input-output analysis, but it is also supplemented with data from other sources. The analysis shows that direct effects by the Swedish agriculture are the most important, while indirect effects from other sources including mobile and impacts abroad are also considerable. The most important impacts from Swedish agriculture according to the analysis are eutrophication, global warming and resource use. The agricultural sector produces a large share of the Swedish emissions causing both global warming and eutrophication. In addition, current agricultural practice causes problems with loss of biodiversity. The most important actors in the sector are agriculture itself, but also all actors using fossil fuels: primarily the transport sector and the energy sector. In addition, consumers are important since they can influence the composition of agricultural production. The analysis shows the importance of including upstream and downstream effects when analysing the environmental impacts from a sector. (author)

Regional restrictions on environmental impact assessment approval in China: the legitimacy of environmental authoritarianism

NARCIS (Netherlands)

Zhu, X.; Zhang, L.; Ran, R.; Mol, A.P.J.

2015-01-01

The poor enforcement and effectiveness of environmental impact assessment (EIA) on construction and investment projects in China has long been blamed for not preventing environmental pollution and degradation. At the same time, freezing EIA approval of all new projects in an administrative region,

Jabiluka environmental studies

International Nuclear Information System (INIS)

Morley, A.W.; Koontz, D.V.; Sanderson, N.T.

1984-01-01

Environmental baseline studies associated with development of the Jabiluka uranium deposits are described. Some basic characteristics of the area local to the deposits are reported and a brief explanation is provided of the nature of, and philosophy behind the environmental studies. The major findings from this program are discussed. (author)

Alternatives and implication in process of environmental impact assessment

Directory of Open Access Journals (Sweden)

Tauš Peter

2001-12-01

Full Text Available EIA is an interactive, rule-based expert system for the environmental impact assessment. It is designed for a screening level assessment of development projects at a pre-feasibility stage. Typical problems for the evaluation include: resettlement; watershed degradation; encroachment upon precious ecosystems; encroachment on historical/cultural values; watershed erosion; reservoir siltation; impairment of navigation; changes in groundwater hydrology, waterlogging; seepage and evaporation losses; migration of valuable fish species; inundation of mineral resources/forests; other inundation losses and adverse effects. It is important to prevent environmental pollution when carrying out large-scale development projects, such as artificial change of landscapes and building of certain structures that may cause a tremendous impact on the environment. In accordance with Cities Environmental Impact Assessment Departments it is necessary to provide project organisers with a necessary advice and instructions concerning the environmental impact assessment a survey to predict and evaluate environmental impact to be conducted by project organisers. Prior to offering the advice and instructions, cities need to hear the opinions of residents of the areas concerned, mayors of related municipalities and other opinion leaders, including specialists, to reflect their views in the environmental preservation. The first aspect in any quality assessment is to determine the representativeness of data both in terms of physical siting and data collected. It must be recognised the environment is a dynamic fluid; quality therefore varies over space and time. There will be locations in any community that experience poorer quality than recorded at a monitoring station. Likewise other sites will have a better quality. Most communities have only a single monitoring site. Therefore, the air quality monitors are sited to provide a representative estimate of the community exposure

[Status Quo, Uncertainties and Trends Analysis of Environmental Risk Assessment for PFASs].

Science.gov (United States)

Hao, Xue-wen; Li, Li; Wang, Jie; Cao, Yan; Liu, Jian-guo

2015-08-01

This study systematically combed the definition and change of terms, category and application of perfluoroalkyl and polyfluoroalkyl substances (PFASs) in international academic, focusing on the environmental risk and exposure assessment of PFASs, to comprehensively analyze the current status, uncertainties and trends of PFASs' environmental risk assessment. Overall, the risk assessment of PFASs is facing a complicated situation involving complex substance pedigrees, various types, complex derivative relations, confidential business information and risk uncertainties. Although the environmental risk of long-chain PFASs has been widely recognized, the short-chain PFASs and short-chain fluorotelomers as their alternatives still have many research gaps and uncertainties in environmental hazards, environmental fate and exposure risk. The scope of risk control of PFASs in the international community is still worth discussing. Due to trade secrets and market competition, the chemical structure and risk information of PFASs' alternatives are generally lack of openness and transparency. The environmental risk of most fluorinated and non-fluorinated alternatives is not clear. In total, the international research on PFASs risk assessment gradually transfer from long-chain perfluoroalkyl acids (PFAAs) represented by perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) to short-chain PFAAs, and then extends to other PFASs. The main problems to be solved urgently and researched continuously are: the environmental hazardous assessment indexes, such as bioaccumulation and environmental migration, optimization method, the environmental release and multimedia environmental fate of short-chain PFASs; the environmental fate of neutral PFASs and the transformation and contribution as precursors of short-chain PFASs; the risk identification and assessment of fluorinated and non-fluorinated alternatives of PFASs.

Variability of building environmental assessment tools on evaluating carbon emissions

Energy Technology Data Exchange (ETDEWEB)

Ng, S. Thomas, E-mail: tstng@hkucc.hku.hk; Chen Yuan, E-mail: chenyuan4@gmail.com; Wong, James M.W., E-mail: jmwwong@hku.hk

2013-01-15

With an increasing importance of sustainability in construction, more and more clients and designers employ building environmental assessment (BEA) tools to evaluate the environmental friendliness of their building facilities, and one important aspect of evaluation in the BEA models is the assessment of carbon emissions. However, in the absence of any agreed framework for carbon auditing and benchmarking, the results generated by the BEA tools might vary significantly which could lead to confusion or misinterpretation on the carbon performance of a building. This study thus aims to unveil the properties of and the standard imposed by the current BEA models on evaluating the life cycle carbon emissions. The analyses cover the (i) weighting of energy efficiency and emission levels among various environmental performance indicators; (ii) building life cycle stages in which carbon is taken into consideration; (iii) objectiveness of assessment; (iv) baseline set for carbon assessment; (v) mechanism for benchmarking the emission level; and (v) limitations of the carbon assessment approaches. Results indicate that the current BEA schemes focus primarily on operational carbon instead of the emissions generated throughout the entire building life cycle. Besides, the baseline and benchmark for carbon evaluation vary significantly among the BEA tools based on the analytical results of a hypothetical building. The findings point to the needs for a more transparent framework for carbon auditing and benchmarking in BEA modeling. - Highlights: Black-Right-Pointing-Pointer Carbon emission evaluation in building environmental assessment schemes are studied. Black-Right-Pointing-Pointer Simulative carbon emission is modeled for building environmental assessment schemes. Black-Right-Pointing-Pointer Carbon assessments focus primarily on operational stage instead of entire lifecycle. Black-Right-Pointing-Pointer Baseline and benchmark of carbon assessment vary greatly among BEA

Variability of building environmental assessment tools on evaluating carbon emissions

International Nuclear Information System (INIS)

Ng, S. Thomas; Chen Yuan; Wong, James M.W.

2013-01-01

With an increasing importance of sustainability in construction, more and more clients and designers employ building environmental assessment (BEA) tools to evaluate the environmental friendliness of their building facilities, and one important aspect of evaluation in the BEA models is the assessment of carbon emissions. However, in the absence of any agreed framework for carbon auditing and benchmarking, the results generated by the BEA tools might vary significantly which could lead to confusion or misinterpretation on the carbon performance of a building. This study thus aims to unveil the properties of and the standard imposed by the current BEA models on evaluating the life cycle carbon emissions. The analyses cover the (i) weighting of energy efficiency and emission levels among various environmental performance indicators; (ii) building life cycle stages in which carbon is taken into consideration; (iii) objectiveness of assessment; (iv) baseline set for carbon assessment; (v) mechanism for benchmarking the emission level; and (v) limitations of the carbon assessment approaches. Results indicate that the current BEA schemes focus primarily on operational carbon instead of the emissions generated throughout the entire building life cycle. Besides, the baseline and benchmark for carbon evaluation vary significantly among the BEA tools based on the analytical results of a hypothetical building. The findings point to the needs for a more transparent framework for carbon auditing and benchmarking in BEA modeling. - Highlights: ► Carbon emission evaluation in building environmental assessment schemes are studied. ► Simulative carbon emission is modeled for building environmental assessment schemes. ► Carbon assessments focus primarily on operational stage instead of entire lifecycle. ► Baseline and benchmark of carbon assessment vary greatly among BEA schemes. ► A more transparent and comprehensive framework for carbon assessment is required.

Methodology for Environmental Impact Assessment; Metodik foer miljoekonsekvensbedoemning

Energy Technology Data Exchange (ETDEWEB)

Malmlund, Anna (Structor Miljoebyraan Stockholm AB (Sweden))

2010-12-15

This report is an appendix to 'Environmental Impact Assessment Interim storage, encapsulation and disposal of spent nuclear fuel'. The appendix presents the methodology and criteria used in support investigations to conduct impact assessments.

Environmental impacts assessment of industrial estate providing with managerial process

Energy Technology Data Exchange (ETDEWEB)

Nouri, J.; Mahvi, A.H.; Younesian, M.; Nabizadeh, R.; Hashemi, I. [Univ. of Tehran (Iran)

2007-07-01

The existence of balance, coordination and required order among natural elements is one of the key factors in the ecosystem. If this balance is disturbed under certain circumstances, it will damage the structure of living existences and more specifically human beings. Since a half century ago, factors such as important economical and industrial activites, advanced technologies together with growing population and lack of concordance among different couhntries to take optimal advantage of the existing natural resources have distrubed the balance in the ecosystem. As a result, man has caused many problems such as high death tolls and arduous diseases due to the different pollutions in water, air, land, sound, temperature, etc and factors such as erosion, desert, expansion, floods, extinction of plant and animal species, ozone layer destruction, global warming, sea level rise and greenhouse gases increase. Environmental Impact Assessment (EIA) is to recognize and assess systematic consequences of projects and programs on elements like physicochemical, biological, cultural, economical and social phenomena in th environment; in other words it is a way or method to determine the direction of predication and assessment of environmental impacts of activities on the environmental health of the ecosystem affecting human lives. In this study, and environmental impact assessment of the establishment of the Shahzand Industrial Estate in Arak at the central part of Iran was investigated. After collection of data and analysis of the findings, the positive and negative impacts resulting from establishment of the indutrial estate were investigated using the Leopold Matrix and Scaling checklist methods providing the managerial solutions in order to minimize the harmful environmental impacts. The existing environmental situation was investigated and then environmental impact alternatives were determined. This was done in regard to the amount and kind of predicted pollution for the

Report on the evaluation under the Act No 24/2006 of Coll. Environmental Impact Assessment Law Extension of National Radioactive Waste Repository in Mochovce for disposal low-level radioactive waste and construction of very low-level radioactive waste repository

International Nuclear Information System (INIS)

Hanusik, V.; Moravek, J.; Kusovska, Z.

2011-01-01

The report elaborated assessment of the environmental impact of extension of the National Radioactive Waste Repository in Mochovce for disposal of low and intermediate level radioactive wastes. Within this repository also the premises for very low level radioactive waste deposition should be built. The assessment report was prepared according to the Act no. 24/2006 Coll, as amended 'On the assessment of environmental impacts' Annex No. 11 upon The scope of assessment issued by the competent authority on the basis of assessment of Intent for this action. The report was prepared in VUJE, Inc. Trnava for Nuclear and Decommissioning Company, Inc. Bratislava (JAVYS).

Recommendations related to the strategic environmental assessment. Methodological note

International Nuclear Information System (INIS)

Le Bris, Charlotte; Brivadier, Isabelle; Fournie, Sebastien; Godart, Angelique; Hubert, Severine; Ille, Yann-Mikiel; Le Mitouard, Eric; Phelep, Michele; Delduc, Paul; Poitevin, Florent; Lemaitre, Valery; Bataille, Tristan; Noulin, Alice; Fevre, Cecile; Kervella, Frederic; Orefici, Christine; Rambaud, Lucile; Antoine, Stephanie; Wormser, Veronique; Garrigou, Olivier; Vinay, Catherine; Cretin, Benedicte; Le Saout, Michaele; Pagnucco, Fabrice; Meinier, Yves; Nicolas, Veronique; Thiolliere, Blandine; Guilbert, Sebastien; Billant, Claude; Saingenest, Patrick

2015-05-01

This methodological note aims at giving commissioners and project managers of plans, schemes and programmes or other planning documents related to strategic environmental assessment a comprehensive vision of the approach to be adopted, as well as useful advices and operational recommendations. The first part recalls the main principles of environmental assessment, addresses general issues of organisation of the approach, and clarifies its articulation with the plan/scheme/programme elaboration or other approaches such as the assessment of incidences on the Natura 2000 network. The second part addresses the different chapters which are foreseen by the regulation for the environmental report. Some sheets are proposed on SDAGEs (Water Development and Management Master Plans) and PGIRs (flood risk management plans), on SRCs (quarry regional plan) and SAGEs (Water Development and Management Scheme)

Palaeoenvironmental assessment of Westphalian fluvio-lacustrine deposits of Lorraine (France) using a combination of organic geochemistry and sedimentology

International Nuclear Information System (INIS)

Fleck, Stephanie; Michels, Raymond; Izart, Alain; Elie, Marcel; Landais, Patrick

2001-01-01

The quality and the quantity of organic carbon preserved in modern and ancient terrestrial sediments is the result of a complex interactions of sedimentological factors, such as in-situ productivity, allochtonous supply of organic matter, oxidation processes, biodegradation and sediment accumulation rates. The study aims at utilizing multidisciplinary information in order to characterize the palaeoenvironment in Westphalian fluvio-lacustrine deposits of the Lorraine Coal Basin (NE France). In this basin, the lack of outcrops is the major difficulty. To compensate for this problem, sedimentology, and molecular geochemistry are combined in order to significantly improve the palaeoenvironmental assessment of the area. Geochemical analyses and sedimentology have been carried out on several core samples of the Saulcy drill hole to evaluate local palaeoenvironmental variability. The lithofacies associations in the Upper Carboniferous of the Lorraine basin suggest an alluvial plain environment without marine incursions. Sedimentological interpretations of the core, as well as comparison with sedimentological models, suggests the recognition of different depositional environments from braided and/or meandering rivers to swamp and lakes. The organic geochemistry is focussed on the recognition of aliphatic hydrocarbons and especially on molecular biomarkers, which provide valuable information about the original organic matter and the transformations that took place during sedimentation and diagenesis. In the Lorraine basin, the botanical variability is high and clearly related to the position of the vegetation communities in the fluvial system. The biomarkers (e.g., diterpanes, steranes) show variations, which can be related to the diversity of this ecosystem. In this study, a reinterpretation of the environmental zonation in the sterane ternary diagram adapted to a fluvio-lacustrine sedimentology is proposed. The correlation between sedimentological and geochemical

Optimizing the Use of Resources of Technogenic Deposits Taking into Account Uncertainties

Directory of Open Access Journals (Sweden)

Ivan Mikhaylovich Potravny

2017-12-01

Full Text Available The article discusses the problem of resource deterioration and the exhaustion of natural resources as well as the involvement in economic circulation of waste production, resources of technogenic deposits in order to maintain natural capital and support “green” economic growth. This necessitates the development of the mechanism for the environmental management optimization. This mechanism aims at using technogenic deposits in the economy to decrease of both the nature intensity of production and the cost of production. Furthermore, the environmental management optimization should reduce the negative impact of production on the environment. The authors propose to construct a model of economic relevance for the use of waste based on the theory of sustainable development and the theory of substitution of primary natural resources. Under substitutes, we consider useful products, resources from technogenic deposits, resulting from past economic activities. The article considers the problem of accumulation of municipal solid waste and industrial wastes in the regions of Russia in terms of forming and operating the ever-growing technogenic deposits. The authors propose a set of models for the optimum exploitation of technogenic deposits taking into account various factors of the external and internal environment as well as the time factor. The proposed models allow to substantiate and choose the best technologies for the processing of accumulated waste in terms of the reduction of pollution and “green” revenues from the exploitation of technogenic deposits. To account the probabilistic assessments of the geological structure of the technogenic deposits, we propose to use a combination of Monte-Carlo method and of developed optimization models. The authors describe the calculation results and the prospects for the development of a comprehensive model using regional technogenic deposits. The results of the research allow forming an optimal set

Environmental assessment report on proposed Yeelirrie uranium project

International Nuclear Information System (INIS)

1979-01-01

In accordance with Government requirements, Western Mining Corporation Ltd. has prepared a Draft Environmental Impact Statement/Environmental Review and Management Programme for its proposed uranium mine development at Yeelirrie, Western Australia. This report includes an outline of the proposal, an enviromental assessment, recommendations by the Environmental Protection Authority made after consideration of the Company's draft statement and a review of public and State Government Departmental Submissions received on the Yeelirrie EIS/ERMP

Courtland Target Assembly Facility Environmental Assessment

Science.gov (United States)

2006-10-01

Draft Environmental Assessment 2-17 tributyl phosphate (TBP)6, diatomaceous earth, talcum powder, cornmeal , water, steel, and plastic. 2.2.2... cornmeal , water, steel, and plastic that would not qualify as hazardous materials. TBP is non-explosive, non-flammable, and stable under normal

Environmental Assessment of Possible Future Waste Management Scenarios

Directory of Open Access Journals (Sweden)

Yevgeniya Arushanyan

2017-02-01

Full Text Available Waste management has developed in many countries and will continue to do so. Changes towards increased recovery of resources in order to meet climate targets and for society to transition to a circular economy are important driving forces. Scenarios are important tools for planning and assessing possible future developments and policies. This paper presents a comprehensive life cycle assessment (LCA model for environmental assessments of scenarios and waste management policy instruments. It is unique by including almost all waste flows in a country and also allow for including waste prevention. The results show that the environmental impacts from future waste management scenarios in Sweden can differ a lot. Waste management will continue to contribute with environmental benefits, but less so in the more sustainable future scenarios, since the surrounding energy and transportation systems will be less polluting and also because less waste will be produced. Valuation results indicate that climate change, human toxicity and resource depletion are the most important environmental impact categories for the Swedish waste management system. Emissions of fossil CO2 from waste incineration will continue to be a major source of environmental impacts in these scenarios. The model is used for analyzing environmental impacts of several policy instruments including weight based collection fee, incineration tax, a resource tax and inclusion of waste in a green electricity certification system. The effect of the studied policy instruments in isolation are in most cases limited, suggesting that stronger policy instruments as well as combinations are necessary to reach policy goals as set out in for example the EU action plan on circular economy.

Environmental assessment, Richton Dome site, Mississippi

International Nuclear Information System (INIS)

1986-05-01

The Nuclear Waste Policy Act of 1982 (42 USC Sections 10101-10226) requires the environmental assessment of a potential site to include a statement of the basis for the nomination of a site as suitable for characterization. Volume 2 of this environmental assessment provides a detailed evaluation of the Richton Dome Site and its suitability as the site for a radioactive waste disposal facility under DOE siting guidelines, as well as a comparison of the Richton Dome site with other proposed sites. Evaluation of the Richton Dome site is based on the reference repository design, but the evaluation will not change if based on the Mission Plan repository concept. The comparative evaluation of proposed sites is required under DOE guidelines, but is not intended to directly support the subsequent recommendation of three sites for characterization as candidate sites. 428 refs., 24 figs., 62 tabs

Overview of Environmental Impact Assessment of Oil and Gas ...

African Journals Online (AJOL)

The environmental impact assessment (EIA) of oil and gas projects in Nigeria ... natural, social and health components of the environment; Determination of issues ... of impact quantification through which the Environmental Management Plan ...

Perspectives for integrating human and environmental exposure assessments.

Science.gov (United States)

Ciffroy, P; Péry, A R R; Roth, N

2016-10-15

Integrated Risk Assessment (IRA) has been defined by the EU FP7 HEROIC Coordination action as "the mutual exploitation of Environmental Risk Assessment for Human Health Risk Assessment and vice versa in order to coherently and more efficiently characterize an overall risk to humans and the environment for better informing the risk analysis process" (Wilks et al., 2015). Since exposure assessment and hazard characterization are the pillars of risk assessment, integrating Environmental Exposure assessment (EEA) and Human Exposure assessment (HEA) is a major component of an IRA framework. EEA and HEA typically pursue different targets, protection goals and timeframe. However, human and wildlife species also share the same environment and they similarly inhale air and ingest water and food through often similar overlapping pathways of exposure. Fate models used in EEA and HEA to predict the chemicals distribution among physical and biological media are essentially based on common properties of chemicals, and internal concentration estimations are largely based on inter-species (i.e. biota-to-human) extrapolations. Also, both EEA and HEA are challenged by increasing scientific complexity and resources constraints. Altogether, these points create the need for a better exploitation of all currently existing data, experimental approaches and modeling tools and it is assumed that a more integrated approach of both EEA and HEA may be part of the solution. Based on the outcome of an Expert Workshop on Extrapolations in Integrated Exposure Assessment organized by the HEROIC project in January 2014, this paper identifies perspectives and recommendations to better harmonize and extrapolate exposure assessment data, models and methods between Human Health and Environmental Risk Assessments to support the further development and promotion of the concept of IRA. Ultimately, these recommendations may feed into guidance showing when and how to apply IRA in the regulatory decision

Assessment of heavy metal pollution from a Fe-smelting plant in urban river sediments using environmental magnetic and geochemical methods

International Nuclear Information System (INIS)

Zhang Chunxia; Qiao Qingqing; Piper, John D.A.; Huang, Baochun

2011-01-01

Environmental magnetic proxies provide a rapid means of assessing the degree of industrial heavy metal pollution in soils and sediments. To test the efficiency of magnetic methods for detecting contaminates from a Fe-smelting plant in Loudi City, Hunan Province (China) we investigated river sediments from Lianshui River. Both magnetic and non-magnetic (microscopic, chemical and statistical) methods were used to characterize these sediments. Anthropogenic heavy metals coexist with coarse-grained magnetic spherules. It can be demonstrated that the Pollution Load Index of industrial heavy metals (Fe, V, Cr, Mo, Zn, Pb, Cd, Cu) and the logarithm of saturation isothermal remanent magnetization, a proxy for magnetic concentration, are significantly correlated. The distribution heavy metal pollution in the Lianshui River is controlled by surface water transport and deposition. Our findings demonstrate that magnetic methods have a useful and practical application for detecting and mapping pollution in and around modern industrial cities. - Highlights: → Assessment of heavy metal (HM) pollution in river sediment using magnetic and chemical methods. → HMs from an Fe-smelting plant coexist with coarse-grained magnetic spherules. → A linear correlation between the Pollution Load Index (PLI) of industrial HMs and a magnetic concentration parameter is demonstrated. → The distribution of HM pollution in river sediments is controlled by surface water flow and deposition. - Heavy metal (HM) contamination of river sediments from industrial input by surface water transport and deposition can be detected by using magnetic methods providing a convenient assessment of HM pollution in industrialized cities.

An Integrated Environmental Assessment of the US Mid-Atlantic Region

Science.gov (United States)

James D. Wickham; K.B. Jones; Kurt H. Riitters; R.V. O' Neill; R.D. Tankersley; E.R. Smith; A.C. Neale; D.J. Chaloud

1999-01-01

Many of today's environmental problems are in scope and their effects overlap and interact. We developed a simple method to provide an integrated assessment of environmental conditions and estimate cumulative impacts across a large region, by combining data on land-cover, population, roads, streams, air pollution, and topography. The integrated assessment...

Social and environmental aspects of the Manantali dam. Retrospective assessment

International Nuclear Information System (INIS)

Ficatier, Yves; Niasse, Madiodio

2008-04-01

After the great drought of the 1970's, and in order to better exploit the water resources of the Senegal river basin, an important project had been launched which comprises the Diama and Manantali dams, the construction or rehabilitation of dikes, and the construction of a hydroelectric plant for the Manantali dam. In order to provide a retrospective assessment of the social and environmental aspects (impacts on agriculture, fishing, electricity production, water availability, and so on) associated with the Manantali dam, this study reports an analysis of major advances and problems noticed at the social and environmental level in the Senegal river basin, an assessment of negative and positive social and environmental impacts of various components of the project achieved with the financial support of French and German institutions (deforestation, construction of both dams, of dikes, and of the energy equipment), an analysis of the way these social and environmental impacts have been managed all along the planning and realisation process, an assessment of social and environmental impacts of the program as a whole (impact studies, realisation, noticed impacts, efficiency in impact management), an analysis of the way existing standards of the moment have been taken into account in the management of environmental issues, and a global assessment of the program according to criteria defined by the DAC (Development Assistance Committee) of the OECD: relevance, efficiency, impact on development, and sustainability

Systematic assessment of environmental risk factors for bipolar disorder

DEFF Research Database (Denmark)

Bortolato, Beatrice; Köhler, Cristiano A.; Evangelou, Evangelos

2017-01-01

factors supported by high epidemiological credibility. Methods: We searched the Pubmed/MEDLINE, EMBASE and PsycInfo databases up to 7 October 2016 to identify systematic reviews and meta-analyses of observational studies that assessed associations between putative environmental risk factors and BD......Objectives: The pathophysiology of bipolar disorder is likely to involve both genetic and environmental risk factors. In our study, we aimed to perform a systematic search of environmental risk factors for BD. In addition, we assessed possible hints of bias in this literature, and identified risk...... met the inclusion criteria (seven meta-analyses and nine qualitative systematic reviews). Fifty-one unique environmental risk factors for BD were evaluated. Six meta-analyses investigated associations with a risk factor for BD. Only irritable bowel syndrome (IBS) emerged as a risk factor for BD...

Analytical Assessment of Environmental Impact for APR1400DC UHS Cooling Tower

Energy Technology Data Exchange (ETDEWEB)

Lee, Jaiho [KHNP-Central Research Institute, Daejeon (Korea, Republic of)

2015-05-15

Hot process water is pumped from the plant process to the cooling towers. Heat is rejected through evaporation of the process water, interacting with ambient air blown upward by fans.. Plumes generated from exit ports of the cooling tower may have adverse effects on the environment, such as deposition of cooling tower drift release, fogging, icing, shadowing, and ground-level temperature and humidity increase. These kinds of environmental impact of the cooling tower are linked closely with the dispersion of the cooling tower plumes. In this respect, predicting the behavior of the plumes has become one of the most important issues in the environmental assessments of the cooling towers. The SACTI (seasonal/annual cooling tower impact) model is an analytical tool to predict the environmental effect of cooling tower, which was developed by Argonne National Laboratory and University of Illinois with support from EPRI (electric power research institute). The initial version of SACTI has been widely used to assess the environmental effect of cooling towers in many industrial fields such as steam power plants and NPPs. Guo et. al. investigated impact of heat rejection and cooling tower height on plume dispersion using the SACTI model, for the purpose of the future construction of inland NPPs. They found that increasing cooling tower height decreases the plume length and height frequencies. Their simulation results showed that the increase in heat rejection increases the plum radius frequency. The APR1400DC is an advanced light water reactor developed for the purpose of NRC-DC (design certification). The cooling towers for APR1400DC UHS consist of two linear mechanical draft cooling towers (LMDCTs). The LMDCT for APR1400DC UHS is conceptually designed because the plant site has not been decided yet. In the present study, the dependency of plume dispersion on the number of cooling towers is investigated using SACTI-2-beta, for predicting annual environmental effect of APR

Development of environmental risk assessment framework using index method

International Nuclear Information System (INIS)

Ali, M.W.; Wu, Y.

2000-01-01

This paper presents a newly developed framework for assessing the risk from events which are considered to be major accidents to the environment according to the classifications by the United Kingdom Department of Environment (DoE). The application of an environmental risk assessment framework using the newly developed index method is demonstrated by means of a case study. The framework makes use of Environmental Hazard Index (EHI) method by the United Kingdom AEA Technology for releases to river, but improves it by taking account to toxic dose rather than concentration; taking account of long-term effects including persistence and bio accumulation, not just short term effects; extending the method to all aspects of environment, not just rivers; and allowing account to be taken of design changes to mitigate the risk. The development of the framework has also led to a revision of the tolerability criteria to be used with the framework proposed earlier by weakness and recommend further work to improve this newly proposed environmental risk assessment framework. From the study, it is recommended that the environmental risk assessment framework be applied to a wide range of other case studies in order to further improve it. The framework should be modified to maintain consistency when the DoE revises its definitions of major accidents to the environment. Ease-of-use of the framework (and any other environmental framework) would be aided by the compilation of databases for environmental toxicity, river data and available consequence models. Further work could also be done to suggest methods of mitigating the risk and including them as numerical factors within method. (author)

Environmental impact assessment and monetary ecosystem service valuation of an ecosystem under different future environmental change and management scenarios; a case study of a Scots pine forest.

Science.gov (United States)

Schaubroeck, Thomas; Deckmyn, Gaby; Giot, Olivier; Campioli, Matteo; Vanpoucke, Charlotte; Verheyen, Kris; Rugani, Benedetto; Achten, Wouter; Verbeeck, Hans; Dewulf, Jo; Muys, Bart

2016-05-15

For a sustainable future, we must sustainably manage not only the human/industrial system but also ecosystems. To achieve the latter goal, we need to predict the responses of ecosystems and their provided services to management practices under changing environmental conditions via ecosystem models and use tools to compare the estimated provided services between the different scenarios. However, scientific articles have covered a limited amount of estimated ecosystem services and have used tools to aggregate services that contain a significant amount of subjective aspects and that represent the final result in a non-tangible unit such as 'points'. To resolve these matters, this study quantifies the environmental impact (on human health, natural systems and natural resources) in physical units and uses an ecosystem service valuation based on monetary values (including ecosystem disservices with associated negative monetary values). More specifically, the paper also focuses on the assessment of ecosystem services related to pollutant removal/generation flows, accounting for the inflow of eutrophying nitrogen (N) when assessing the effect of N leached to groundwater. Regarding water use/provisioning, evapotranspiration is alternatively considered a disservice because it implies a loss of (potential) groundwater. These approaches and improvements, relevant to all ecosystems, are demonstrated using a Scots pine stand from 2010 to 2089 for a combination of three environmental change and three management scenarios. The environmental change scenarios considered interannual climate variability trends and included alterations in temperature, precipitation, nitrogen deposition, wind speed, Particulate matter (PM) concentration and CO2 concentration. The addressed flows/ecosystem services, including disservices, are as follows: particulate matter removal, freshwater loss, CO2 sequestration, wood production, NOx emissions, NH3 uptake and nitrogen pollution/removal. The monetary

Advancing environmental risk assessment for transgenic biofeedstock crops

Directory of Open Access Journals (Sweden)

Wolt Jeffrey D

2009-11-01

Full Text Available Abstract Transgenic modification of plants is a key enabling technology for developing sustainable biofeedstocks for biofuels production. Regulatory decisions and the wider acceptance and development of transgenic biofeedstock crops are considered from the context of science-based risk assessment. The risk assessment paradigm for transgenic biofeedstock crops is fundamentally no different from that of current generation transgenic crops, except that the focus of the assessment must consider the unique attributes of a given biofeedstock crop and its environmental release. For currently envisioned biofeedstock crops, particular emphasis in risk assessment will be given to characterization of altered metabolic profiles and their implications relative to non-target environmental effects and food safety; weediness and invasiveness when plants are modified for abiotic stress tolerance or are domesticated; and aggregate risk when plants are platforms for multi-product production. Robust risk assessments for transgenic biofeedstock crops are case-specific, initiated through problem formulation, and use tiered approaches for risk characterization.

Model of environmental life cycle assessment for coal mining operations

Energy Technology Data Exchange (ETDEWEB)

Burchart-Korol, Dorota, E-mail: dburchart@gig.eu; Fugiel, Agata, E-mail: afugiel@gig.eu; Czaplicka-Kolarz, Krystyna, E-mail: kczaplicka@gig.eu; Turek, Marian, E-mail: mturek@gig.eu

2016-08-15

This paper presents a novel approach to environmental assessment of coal mining operations, which enables assessment of the factors that are both directly and indirectly affecting the environment and are associated with the production of raw materials and energy used in processes. The primary novelty of the paper is the development of a computational environmental life cycle assessment (LCA) model for coal mining operations and the application of the model for coal mining operations in Poland. The LCA model enables the assessment of environmental indicators for all identified unit processes in hard coal mines with the life cycle approach. The proposed model enables the assessment of greenhouse gas emissions (GHGs) based on the IPCC method and the assessment of damage categories, such as human health, ecosystems and resources based on the ReCiPe method. The model enables the assessment of GHGs for hard coal mining operations in three time frames: 20, 100 and 500 years. The model was used to evaluate the coal mines in Poland. It was demonstrated that the largest environmental impacts in damage categories were associated with the use of fossil fuels, methane emissions and the use of electricity, processing of wastes, heat, and steel supports. It was concluded that an environmental assessment of coal mining operations, apart from direct influence from processing waste, methane emissions and drainage water, should include the use of electricity, heat and steel, particularly for steel supports. Because the model allows the comparison of environmental impact assessment for various unit processes, it can be used for all hard coal mines, not only in Poland but also in the world. This development is an important step forward in the study of the impacts of fossil fuels on the environment with the potential to mitigate the impact of the coal industry on the environment. - Highlights: • A computational LCA model for assessment of coal mining operations • Identification of

Model of environmental life cycle assessment for coal mining operations

International Nuclear Information System (INIS)

Burchart-Korol, Dorota; Fugiel, Agata; Czaplicka-Kolarz, Krystyna; Turek, Marian

2016-01-01

This paper presents a novel approach to environmental assessment of coal mining operations, which enables assessment of the factors that are both directly and indirectly affecting the environment and are associated with the production of raw materials and energy used in processes. The primary novelty of the paper is the development of a computational environmental life cycle assessment (LCA) model for coal mining operations and the application of the model for coal mining operations in Poland. The LCA model enables the assessment of environmental indicators for all identified unit processes in hard coal mines with the life cycle approach. The proposed model enables the assessment of greenhouse gas emissions (GHGs) based on the IPCC method and the assessment of damage categories, such as human health, ecosystems and resources based on the ReCiPe method. The model enables the assessment of GHGs for hard coal mining operations in three time frames: 20, 100 and 500 years. The model was used to evaluate the coal mines in Poland. It was demonstrated that the largest environmental impacts in damage categories were associated with the use of fossil fuels, methane emissions and the use of electricity, processing of wastes, heat, and steel supports. It was concluded that an environmental assessment of coal mining operations, apart from direct influence from processing waste, methane emissions and drainage water, should include the use of electricity, heat and steel, particularly for steel supports. Because the model allows the comparison of environmental impact assessment for various unit processes, it can be used for all hard coal mines, not only in Poland but also in the world. This development is an important step forward in the study of the impacts of fossil fuels on the environment with the potential to mitigate the impact of the coal industry on the environment. - Highlights: • A computational LCA model for assessment of coal mining operations • Identification of

Environmental impact assessment of abnormal events: a follow-up study

International Nuclear Information System (INIS)

Hunsaker, D.B. Jr.; Lee, D.W.

1985-01-01

Impact analyses included in environmental assessments for a selected nuclear power plant, petroleum storage facility, crude oil pipeline, and geopressure well that have experienced operational, abnormal events are compared with the data quantifying the environmental impacts of the events. Comparisons of predicted vs actual impacts suggests that prediction of the types of events and associated impacts could be improved; in some instances, impacts have been underestimated. Analysis of abnormal events is especially important in environmental assessment documents addressing a technology that is novel or unique to a particular area. Incorporation of abnormal event impact analysis into project environmental monitoring and emergency response plans can help improve these plans and can help reduce the magnitude of environmental impacts resulting from said events

Environmental impact assessment in the Nordic Countries; Miljoekonsekvensbeskrivningar i Norden

Energy Technology Data Exchange (ETDEWEB)

Broden, K. [Studsvik RadWaste AB (Sweden); Palsson, S.E. [Geislavarnir rikisins (Iceland); Poroddsson, P. [Skipulagsstofnun (Iceland)

2000-12-01

A meeting on Environmental Impact Assessment has been held in Iceland, September 2-6, 2000. It was held within the framework of the project NKS/SOS-3 (Radioactive waste), subproject NKS/SOS-3.1 (Environmental Impact Assessment). The meeting included presentations, discussions and a study trip to the Egilsstadir and Myvatn districts. (au)

[Assessment of eco-environmental vulnerability of Hainan Island, China].

Science.gov (United States)

Huang, Bao-rong; Ouyang, Zhi-yun; Zhang, Hui-zhi; Zhang, Li-hua; Zheng, Hua

2009-03-01

Based on the assessment method of environmental vulnerability constructed by SOPAC and UNEP, this paper constructed an indicator system from three sub-themes including hazard, resistance, and damage to assess the eco-environmental vulnerability of Hainan Island. The results showed that Hainan Island was suffering a middling level eco-environmental hazard, and the main hazards came from some intensive human activities such as intensive agriculture, mass tourism, mining, and a mass of solid wastes thrown by islanders and tourists. Some geographical characters such as larger land area, larger altitude range, integrated geographical form, and abundant habitat types endowed Hainan Island higher resistance to environmental hazards. However, disturbed by historical accumulative artificial and natural hazards, the Island ecosystem had showed serious ecological damage, such as soil degradation and biodiversity loss. Comprehensively considered hazard, resistance, damage, and degradation, the comprehensive environmental vulnerability of the Island was at a middling level. Some indicators showed lower vulnerability, but some showed higher vulnerability.

Environmental Risk Communication through Qualitative Risk Assessment

Directory of Open Access Journals (Sweden)

Sabre J. Coleman

2014-06-01

Full Text Available Environmental analysts are often hampered in communicating the risks of environmental contaminants due to the myriad of regulatory requirements that are applicable. The use of a qualitative, risk-based control banding strategy for assessment and control of potential environmental contaminants provides a standardized approach to improve risk communication. Presented is a model that provides an effective means for determining standardized responses and controls for common environmental issues based on the level of risk. The model is designed for integration within an occupational health and safety management system to provide a multidisciplinary environmental and occupational risk management approach. This environmental model, which utilizes multidisciplinary control banding strategies for delineating risk, complements the existing Risk Level Based Management System, a proven method in a highly regulated facility for occupational health and safety. A simplified environmental risk matrix is presented that is stratified over four risk levels. Examples of qualitative environmental control banding strategies are presented as they apply to United States regulations for construction, research activities, facility maintenance, and spill remediation that affect air, water, soil, and waste disposal. This approach offers a standardized risk communication language for multidisciplinary issues that will improve communications within and between environmental health and safety professionals, workers, and management.

A state-impact-state methodology for assessing environmental impact in land use planning

International Nuclear Information System (INIS)

Chen, Longgao; Yang, Xiaoyan; Chen, Longqian; Potter, Rebecca; Li, Yingkui

2014-01-01

The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level

A state-impact-state methodology for assessing environmental impact in land use planning

Energy Technology Data Exchange (ETDEWEB)

Chen, Longgao [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); Yang, Xiaoyan [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Chen, Longqian, E-mail: cumt_chenlongqian@163.com [School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Potter, Rebecca; Li, Yingkui [Department of Geography, University of Tennessee, Knoxville, TN 37996 (United States)

2014-04-01

The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level.

Environmental monitoring, restoration and assessment: What have we learned

Energy Technology Data Exchange (ETDEWEB)

Gray, R.H. (ed.)

1990-01-01

The Twenty-Eighth Hanford Symposium on Health and the Environment was held in Richland, Washington, October 16--19, 1989. The symposium was sponsored by the US Department of Energy and the Pacific Northwest Laboratory, operated by Battelle Memorial Institute. The symposium was organized to review and evaluate some of the monitoring and assessment programs that have been conducted or are currently in place. Potential health and environmental effects of energy-related and other industrial activities have been monitored and assessed at various government and private facilities for over three decades. Most monitoring is required under government regulations; some monitoring is implemented because facility operators consider it prudent practice. As a result of these activities, there is now a substantial radiological, physical, and chemical data base for various environmental components, both in the United States and abroad. Symposium participants, both platform and poster presenters, were asked to consider, among other topics, the following: Has the expenditure of millions of dollars for radiological monitoring and assessment activities been worth the effort How do we decide when enough monitoring is enough Can we adequately assess the impacts of nonradiological components -- both inorganic and organic -- of wastes Are current regulatory requirements too restrictive or too lenient Can monitoring and assessment be made more cost effective Papers were solicited in the areas of environmental monitoring; environmental regulations; remediation, restoration, and decommissioning; modeling and dose assessment; uncertainty, design, and data analysis; and data management and quality assurance. Individual reports are processed separately for the databases.

Environmental monitoring, restoration and assessment: What have we learned?

International Nuclear Information System (INIS)

Gray, R.H.

1990-01-01

The Twenty-Eighth Hanford Symposium on Health and the Environment was held in Richland, Washington, October 16--19, 1989. The symposium was sponsored by the US Department of Energy and the Pacific Northwest Laboratory, operated by Battelle Memorial Institute. The symposium was organized to review and evaluate some of the monitoring and assessment programs that have been conducted or are currently in place. Potential health and environmental effects of energy-related and other industrial activities have been monitored and assessed at various government and private facilities for over three decades. Most monitoring is required under government regulations; some monitoring is implemented because facility operators consider it prudent practice. As a result of these activities, there is now a substantial radiological, physical, and chemical data base for various environmental components, both in the United States and abroad. Symposium participants, both platform and poster presenters, were asked to consider, among other topics, the following: Has the expenditure of millions of dollars for radiological monitoring and assessment activities been worth the effort? How do we decide when enough monitoring is enough? Can we adequately assess the impacts of nonradiological components -- both inorganic and organic -- of wastes? Are current regulatory requirements too restrictive or too lenient? Can monitoring and assessment be made more cost effective? Papers were solicited in the areas of environmental monitoring; environmental regulations; remediation, restoration, and decommissioning; modeling and dose assessment; uncertainty, design, and data analysis; and data management and quality assurance. Individual reports are processed separately for the databases

Decision-oriented environmental assessment: An empirical study of its theory and methods

International Nuclear Information System (INIS)

Pischke, Frederik; Cashmore, Matthew

2006-01-01

The potential advantages of a decision-oriented theory of environmental assessment have long been recognised, but it is only in recent years that this topic has received concerted attention. This research advanced contemporary debate on environmental assessment through an empirically-informed evaluation of strategic theoretical and methodological issues associated with the practical application of decision-oriented theory. This was undertaken by critically analysing the decision-oriented Environmental Impact Assessment system of the German Development Cooperation (a bilateral development assistance agency) using a modified version of a recent conceptual and methodological development, Analytical Strategic Environmental Assessment. The results indicate that some aspects of decision-oriented theory offer considerable potential for environmental assessment process management, and should be employed routinely. Yet uncertainty remains about whether certain core concepts, notably the detailed a priori description of decision processes, can be achieved in practice. The analysis also indicates that there is considerably more common ground in many contemporary debates about environmental assessment than the literature, which has tended towards polarisation suggests. The significance of this research is that it recognises and highlights the contribution of decision-oriented theory to refocusing attention on the substantive intent of this globally significant policy tool

An integrated model for the Environmental Impact Assessment of Highways in China

DEFF Research Database (Denmark)

Cai, Hao

2011-01-01

In China, environmental issues caused by construction and operation of highway catch more and more attention, and thus environmental impact assessment of highway has become an important part of feasibility study. According to the Specifications for Environmental Impact Assessment of Highways...... in the People's Republic of China, this paper proposes an integrated model for Environmental Impact Assessment (EIA) of highway. The model has two main characteristics. Firstly, the whole highway is divided into several sections, and then weight of each section is distributed by its importance. Secondly...

Atmospheric concentrations and deposition of oxidised sulfur and nitrogen species at Petaling Jaya, Malaysia, 1993-1998

Energy Technology Data Exchange (ETDEWEB)

Ayers, G.P.; Gillett, R.W.; Manins, P.C. [CSIRO Atmospheric Research, Aspendale, VIC (Australia); Peng Leong Chow; Fook Lim Sze [Malaysian Meteorological Service, Petaling Jaya (Malaysia); Kong Cheah Wai [Tenaga Nasional R and D Berhad, Kajang (Malaysia)

2000-02-01

Wet-only rainwater composition, acid-precursor gas mixing ratios and aerosol loading were determined from weekly-averaged samples at Petaling Jaya, Malaysia, over the five year period from March 1993 to March 1998. Annual deposition fluxes of acidic sulfur and nitrogen species estimated from these data show this site to be heavily impacted by acidic deposition, with total oxidised sulfur plus nitrogen deposition in the range 277-480 meq m{sup -2} yr{sup -1}. Average contributions were 56% as sulfur species, 44% as nitrogen species, with wet deposition in this region of high rainfall accounting for 67% of total deposition. Thus total acid deposition fluxes were equivalent to levels that provided motivation for emissions reduction programs in both Europe and North America. The possibility of adverse environmental effects in Malaysia caused by acid deposition therefore merits serious consideration and assessment.

Sequential simulation approach to modeling of multi-seam coal deposits with an application to the assessment of a Louisiana lignite

Science.gov (United States)

Olea, Ricardo A.; Luppens, James A.

2012-01-01

There are multiple ways to characterize uncertainty in the assessment of coal resources, but not all of them are equally satisfactory. Increasingly, the tendency is toward borrowing from the statistical tools developed in the last 50 years for the quantitative assessment of other mineral commodities. Here, we briefly review the most recent of such methods and formulate a procedure for the systematic assessment of multi-seam coal deposits taking into account several geological factors, such as fluctuations in thickness, erosion, oxidation, and bed boundaries. A lignite deposit explored in three stages is used for validating models based on comparing a first set of drill holes against data from infill and development drilling. Results were fully consistent with reality, providing a variety of maps, histograms, and scatterplots characterizing the deposit and associated uncertainty in the assessments. The geostatistical approach was particularly informative in providing a probability distribution modeling deposit wide uncertainty about total resources and a cumulative distribution of coal tonnage as a function of local uncertainty.

Life cycle assessment of energy products: environmental impact assessment of biofuels

Energy Technology Data Exchange (ETDEWEB)

Zah, R.; Boeni, H.; Gauch, M.; Hischier, R.; Lehmann, M.; Waeger, P.

2007-05-15

This final report for the Swiss Federal Office of Energy (SFOE) deals with the results of a study that evaluated the environmental impact of the entire production chain of fuels made from biomass and used in Switzerland. Firstly, the study supplies an analysis of the possible environmental impacts of biofuels that can be used as a basis for political decisions. Secondly, an environmental life cycle assessment (LCA) of various biofuels is presented. In addition, the impacts of fuel use are compared with other uses for bioenergy such as the generation of electricity and heat. The methods used in the LCA are discussed, including the Swiss method of ecological scarcity (Environmental Impact Points, UBP 06), and the European Eco-indicator 99 method. The results of the study are discussed, including the finding that not all biofuels can reduce environmental impacts as compared to fossil fuels. The role to be played by biofuels produced in an environmentally-friendly way together with other forms of renewable energy in our future energy supply is discussed.

Guidelines for comparative assessment of the environmental impacts of wastes from electricity generation systems. A framework for the assessment and comparison of environmental impacts

International Nuclear Information System (INIS)

1995-02-01

The report describes the initial phase of a project intended to provide guidance to those concerned with environmental aspects of solid and hazardous waste management in electrical energy production systems. The focus is on describing a methodology for assessing and comparing the environmental impact arising from these wastes, and thereby to provide an input to overall electrical generation comparison projects, such as DECADES. The structure of the report is as follows: after considering a range of electrical energy production systems with an outline discussion of the waste streams produced in each case, the relevant treatment technologies and disposal options are reviewed. Then the elements of the framework for comparative assessment proposed in this report are described. The types of environmental impact, environmental protection criteria and indicators or end-points to measure the impact, the way in which such impacts can be quantitatively assessed and compared are discussed. 59 refs, figs and tabs

Live Fire Range Environmental Assessment

Energy Technology Data Exchange (ETDEWEB)

None

1993-08-01

The Central Training Academy (CTA) is a DOE Headquarters Organization located in Albuquerque, New Mexico, with the mission to effectively and efficiently educate and train personnel involved in the protection of vital national security interests of DOE. The CTA Live Fire Range (LFR), where most of the firearms and tactical training occurs, is a complex separate from the main campus. The purpose of the proposed action is to expand the LFR to allow more options of implementing required training. The Department of Energy has prepared this Environmental Assessment (EA) for the proposed construction and operation of an expanded Live Fire Range Facility at the Central Training Academy in Albuquerque, New Mexico. Based on the analysis in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an environmental impact statement is not required and DOE is issuing this Finding of No Significant Impact (FONSI).

Assessing and Enhancing Environmental Sustainability: A Conceptual Review.

Science.gov (United States)

Little, John C; Hester, Erich T; Carey, Cayelan C

2016-07-05

While sustainability is an essential concept to ensure the future of humanity and the integrity of the resources and ecosystems on which we depend, identifying a comprehensive yet realistic way to assess and enhance sustainability may be one of the most difficult challenges of our time. We review the primary environmental sustainability assessment approaches, categorizing them as either being design-based or those that employ computational frameworks and/or indicators. We also briefly review approaches used for assessing economic and social sustainability because sustainability necessitates integrating environmental, economic, and social elements. We identify the collective limitations of the existing assessment approaches, showing that there is not a consistent definition of sustainability, that the approaches are generally not comprehensive and are subject to unintended consequences, that there is little to no connection between bottom-up and top-down approaches, and that the field of sustainability is largely fragmented, with a range of academic disciplines and professional organizations pursuing similar goals, but without much formal coordination. We conclude by emphasizing the need for a comprehensive definition of sustainability (that integrates environmental, economic, and social aspects) with a unified system-of-systems approach that is causal, modular, tiered, and scalable, as well as new educational and organizational structures to improve systems-level interdisciplinary integration.

Environmental assessment model for shallow land disposal of low-level radioactive wastes: interim report

International Nuclear Information System (INIS)

Little, C.A.; Fields, D.E.; Emerson, C.J.; Hiromoto, G.

1981-09-01

PRESTO (Prediction of Radiation Effects from Shallow Trench Operations) is a computer code developed under US Environmental Protection Agency (EPA) funding to evaluate possible health effects from shallow land burial trenches. The model is intended to be generic and to assess radionuclide transport, ensuing exposure, and health impact to a static local population for a 1000-y period following the end of burial operations. Human exposure scenarios considered by the model include normal releases (including leaching and operational spillage), human intrusion, and site farming or reclamation. Pathways and processes of transit from the trench to an individual or population include: groundwater transport, overland flow, erosion, surface water dilution, resuspension, atmospheric transport, deposition, inhalation, and ingestion of contaminated beef, milk, crops, and water. Both population doses and individual doses are calculated as well as doses to the intruder and farmer

Environmental Assessment of Packaging: The Consumer Point of View

Science.gov (United States)

Van Dam YK

1996-09-01

When marketing environmentally responsible packaged products, the producer is confronted with consumer beliefs concerning the environmental friendliness of packaging materials. When making environmentally conscious packaging decisions, these consumer beliefs should be taken into account alongside the technical guidelines. Dutch consumer perceptions of the environmental friendliness of packaged products are reported and compared with the results of a life-cycle analysis assessment. It is shown that consumers judge environmental friendliness mainly from material and returnability. Furthermore, the consumer perception of the environmental friendliness of packaging material is based on the postconsumption waste, whereas the environmental effects of production are ignored. From the consumer beliefs concerning environmental friendliness implications are deduced for packaging policy and for environmental policy.KEY WORDS: Consumer behavior; Environment; Food; Packaging; Perception; Waste

Strategic environmental assessment for energy production

International Nuclear Information System (INIS)

Jay, Stephen

2010-01-01

Amongst the approaches that have developed to improve environmental protection within the energy sector, strategic environmental assessment (SEA) has received relatively little attention. This is despite its potential to overcome some of the shortcomings associated with project-level assessment by intervening at higher levels of energy system planning. In this article, a review is presented of the extent to which SEA has been adopted and otherwise promoted in strategic energy planning processes in a wide range of countries throughout the world (with an emphasis on European Union nations). In this regard, the growing importance of regulatory compliance is underlined, especially within the EU, with a particular focus upon the application of SEA to grid systems. The case of the Belgian transmission system is described, illustrating a proactive approach to SEA. But the difficulties inherent in introducing SEA to an increasingly fragmented and liberalised sector are also drawn out, leading to suggestions by which these difficulties may be addressed.

Geospatial Technology In Environmental Impact Assessments – Retrospective.

Directory of Open Access Journals (Sweden)

Goparaju Laxmi

2015-10-01

Full Text Available Environmental Impact Assessments are studies conducted to give us an insight into the various impacts caused by an upcoming industry or any developmental activity. It should address various social, economic and environmental issues ensuring that negative impacts are mitigated. In this context, geospatial technology has been used widely in recent times.

Environmental impact assessment in practice: A gender critique

International Nuclear Information System (INIS)

Kurian, P.A.; Purdue Univ., West Lafayette, IN

1995-01-01

The author evaluates the extent to which environmental impact assessment (EIA) as conceptualized by EIA systems is a gendered process. Through a discourse analysis of in-depth interviews with bureaucrats, technocrats, and activists involved with the Sardar Sarovar dam project in India, the author examines the practice of EIA in a Third World country. She uses a theoretical framework, informed by a theory of gender, to evaluate the interviews. In practice, EIA is marked by gender biases that ignore the gender-specific nature of impacts. Such biases distort the impact assessment process, making environmental sustainability difficult, if not impossible, to achieve

A qualitative method proposal to improve environmental impact assessment

International Nuclear Information System (INIS)

Toro, Javier; Requena, Ignacio; Duarte, Oscar; Zamorano, Montserrat

2013-01-01

In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown

A qualitative method proposal to improve environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Toro, Javier, E-mail: jjtoroca@unal.edu.co [Institute of Environmental Studies, National University of Colombia at Bogotá (Colombia); Requena, Ignacio, E-mail: requena@decsai.ugr.es [Department of Computer Science and Artificial Intelligence, University of Granada (Spain); Duarte, Oscar, E-mail: ogduartev@unal.edu.co [National University of Colombia at Bogotá, Department of Electrical Engineering and Electronics (Colombia); Zamorano, Montserrat, E-mail: zamorano@ugr.es [Department of Civil Engineering, University of Granada (Spain)

2013-11-15

In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown.

Data management and statistical analysis for environmental assessment

International Nuclear Information System (INIS)

Wendelberger, J.R.; McVittie, T.I.

1995-01-01

Data management and statistical analysis for environmental assessment are important issues on the interface of computer science and statistics. Data collection for environmental decision making can generate large quantities of various types of data. A database/GIS system developed is described which provides efficient data storage as well as visualization tools which may be integrated into the data analysis process. FIMAD is a living database and GIS system. The system has changed and developed over time to meet the needs of the Los Alamos National Laboratory Restoration Program. The system provides a repository for data which may be accessed by different individuals for different purposes. The database structure is driven by the large amount and varied types of data required for environmental assessment. The integration of the database with the GIS system provides the foundation for powerful visualization and analysis capabilities

Parameters for assessing the aquatic environmental impact of cosmetic products.

Science.gov (United States)

Vita, N A; Brohem, C A; Canavez, A D P M; Oliveira, C F S; Kruger, O; Lorencini, M; Carvalho, C M

2018-05-01

The cosmetic industry's growing concern about the impact of its supply chain on the environment, sustainability of raw materials, and biodiversity increases the need to ensure that the final product has a lower environmental impact. The objective of this review is to summarize and compare the information available from international organizations and legislation regarding the main criteria used to assess raw materials for aquatic toxicity, as well as the most suitable alternative methods for obtaining assessment parameters. Using the literature available in databases, a review of the scientific literature and international legislation, this work discusses and compares the parameters established by international organizations such as the Environmental Protection Agency (EPA) and Cradle to Cradle (C2C), as well as European legislation, namely, European Regulation 1272/2008, for assessing environmental impact. Defining the ecotoxicity parameters of the main classes of raw materials in rinse-off cosmetic products can enable the development of products that are more environmentally sustainable, prioritizing substances with less environmental impact. Copyright © 2018 Elsevier B.V. All rights reserved.

Environmental sustainability assessment of hydropower plant in Europe using life cycle assessment

Science.gov (United States)

Mahmud, M. A. P.; Huda, N.; Farjana, S. H.; Lang, C.

2018-05-01

Hydropower is the oldest and most common type of renewable source of electricity available on this planet. The end of life process of hydropower plant have significant environmental impacts, which needs to be identified and minimized to ensure an environment friendly power generation. However, identifying the environmental impacts and health hazards are very little explored in the hydropower processing routes despite a significant quantity of production worldwide. This paper highlight the life-cycle environmental impact assessment of the reservoir based hydropower generation system located in alpine and non-alpine region of Europe, addressing their ecological effects by the ReCiPe and CML methods under several impact-assessment categories such as human health, ecosystems, global warming potential, acidification potential, etc. The Australasian life-cycle inventory database and SimaPro software are utilized to accumulate life-cycle inventory dataset and to evaluate the impacts. The results reveal that plants of alpine region offer superior environmental performance for couple of considered categories: global warming and photochemical oxidation, whilst in the other cases the outcomes are almost similar. Results obtained from this study will take part an important role in promoting sustainable generation of hydropower, and thus towards environment friendly energy production.

Pre-operational monitoring and assessment of aquatic biota in environmental impact assessment studies

International Nuclear Information System (INIS)

Ghosh, T.K.

2001-01-01

Environmental Impact Assessment (EIA) is an ideal anticipatory mechanism which establishes quantitative values for parameters indicating the quality of the environment before, during and after the proposed developmental activity, thus allowing measures that ensure environmental compatibility in developmental process. EIA studies have been made mandatory in India by MoEF, GOI for expansion/modernization of any activity or development of new project. Biological assessment, under aquatic environment, is one of the major components of EIA and it requires systematic way of data collection. Generation of substantial baseline data can then be used for formulation of subsequent stages of EIA, viz. prediction, evaluation, impact statements and environmental management plan (EMP). However, a definite approach towards biological studies under EIA during pre-operational stage has not been outlined in available guidelines. (author)

Pre-operational monitoring and assessment of aquatic biota in environmental impact assessment studies

Energy Technology Data Exchange (ETDEWEB)

Ghosh, T K [Ecotechnology Division, National Environmental Engineering Research Inst., Nagpur (India)

2001-06-01

Environmental Impact Assessment (EIA) is an ideal anticipatory mechanism which establishes quantitative values for parameters indicating the quality of the environment before, during and after the proposed developmental activity, thus allowing measures that ensure environmental compatibility in developmental process. EIA studies have been made mandatory in India by MoEF, GOI for expansion/modernization of any activity or development of new project. Biological assessment, under aquatic environment, is one of the major components of EIA and it requires systematic way of data collection. Generation of substantial baseline data can then be used for formulation of subsequent stages of EIA, viz. prediction, evaluation, impact statements and environmental management plan (EMP). However, a definite approach towards biological studies under EIA during pre-operational stage has not been outlined in available guidelines. (author)

The Pulsed Cylindrical Magnetron for Deposition

Science.gov (United States)

Korenev, Sergey

2012-10-01

The magnetron sputtering deposition of films and coatings broadly uses in microelectronics, material science, environmental applications and etc. The rate of target evaporation and time for deposition of films and coatings depends on magnetic field. These parameters link with efficiency of gas molecules ionization by electrons. The cylindrical magnetrons use for deposition of films and coatings on inside of pipes for different protective films and coatings in oil, chemical, environmental applications. The classical forming of magnetic field by permanent magnets or coils for big and long cylindrical magnetrons is complicated. The new concept of pulsed cylindrical magnetron for high rate deposition of films and coating for big and long pipes is presented in this paper. The proposed cylindrical magnetron has azimuthally pulsed high magnetic field, which allows forming the high ionized plasma and receiving high rate of evaporation material of target (central electrode). The structure of proposed pulsed cylindrical magnetron sputtering system is given. The main requirements to deposition system are presented. The preliminary data for forming of plasma and deposition of Ta films and coatings on the metal pipers are discussed. The comparison of classical and proposed cylindrical magnetrons is given. The analysis of potential applications is considered.

In situ assessment of genotoxic hazards of environmental pollution.

Science.gov (United States)

Sandhu, S S; Lower, W R

1989-01-01

The potential impact of the environmental pollutants on human health can be evaluated by the laboratory analysis of the environmental samples or by the measurement of the biological effects on indigenous populations and/or specific test organisms placed in the environment to be monitored. A canary in a cage, used by 19th century miners as a biological indicator for rising levels of toxic gases, is a classical example of in situ hazard identification. The induced toxic effects are often the result of synergistic and antagonistic interactions among various physical and chemical factors that are difficult to reproduce in the laboratory. Therefore, conceivably the biological effects measured on or near the impacted site have greater relevancy for hazard assessment to man than from the data derived from the environmental samples analyzed in the lab. The organisms most commonly employed for the assessment of mutagenicity under real-world conditions are: (1) flowering plants, (2) wild and captive mammals, and (3) aquatic vertebrates. Plant species such as Tradescantia paludosa, Zea mays, and Osmunda regalis have been used for monitoring ambient air quality around several major industrial cities in the U.S.A., nuclear power plants, and industrial waste sites, and also for the assessment of potential health effects of municipal sewage sludges. Domestic animals such as dogs can be used as sentinels to provide information on the effects of contaminants in the environment and have been used to a limited extent to evaluate the environmental influences on the occurrence of breast cancer and osteosarcoma. Cytogenetic analysis from feral and wild animals has been employed for assessing the health hazards and prioritizing the clean-up efforts at hazardous waste sites. Aquatic animals have been used more often than terrestrial animals or plants to identify and characterize the genotoxic effects of environmental pollution. Since 1970, a number of studies has been reported on the

Environmental assessment in The Netherlands: Effectively governing environmental protection? A discourse analysis

Energy Technology Data Exchange (ETDEWEB)

Runhaar, Hens, E-mail: h.a.c.runhaar@uu.nl [Utrecht University, Copernicus Institute of Sustainable Development, P.O. Box 80,115, 3508 TC Utrecht (Netherlands); Laerhoven, Frank van, E-mail: vanLaerhoven@uu.nl [Utrecht University, Copernicus Institute of Sustainable Development, P.O. Box 80,115, 3508 TC Utrecht (Netherlands); Driessen, Peter, E-mail: p.driessen@uu.nl [Utrecht University, Copernicus Institute of Sustainable Development, P.O. Box 80,115, 3508 TC Utrecht (Netherlands); Arts, Jos, E-mail: e.j.m.m.arts@rug.nl [University of Groningen, Faculty of Planning, P.O. Box 800, 9700 AV Groningen (Netherlands)

2013-02-15

Environmental assessment (EA) aims to enhance environmental awareness and to ensure that environmental values are fully considered in decision-making. In the EA arena, different discourses exist on what EA should aim for and how it functions. We hypothesise that these discourses influence its application in practice as well as its effectiveness in terms of achieving the above goals. For instance, actors who consider EA as a hindrance to fast implementation of their projects will probably apply it as a mandatory checklist, whereas actors who believe that EA can help to develop more environmentally sound decisions will use EIA as a tool to design their initiatives. In this paper we explore discourses on EA in The Netherlands and elaborate on their implications for EA effectiveness. Based on an innovative research design comprising an online survey with 443 respondents and 20 supplementary semi-structured interviews we conclude that the dominant discourse is that EA is mainly a legal requirement; EAs are conducted because they have to be conducted, not because actors choose to do so. EA effectiveness however seems reasonably high, as a majority of respondents perceive that it enhances environmental awareness and contributes to environmental protection. However, the 'legal requirement' discourse also results in decision-makers seldom going beyond what is prescribed by EA and environmental law. Despite its mandatory character, the predominant attitude towards EA is quite positive. For most respondents, EA is instrumental in providing transparency of decision-making and in minimising the legal risks of not complying with environmental laws. Differences in discourses seldom reflect extreme opposites. The 'common ground' regarding EA provides a good basis for working with EA in terms of meeting legal requirements but at the same time does not stimulate creativity in decision-making or optimisation of environmental values. In countries characterised by

Environmental assessment in The Netherlands: Effectively governing environmental protection? A discourse analysis

International Nuclear Information System (INIS)

Runhaar, Hens; Laerhoven, Frank van; Driessen, Peter; Arts, Jos

2013-01-01

Environmental assessment (EA) aims to enhance environmental awareness and to ensure that environmental values are fully considered in decision-making. In the EA arena, different discourses exist on what EA should aim for and how it functions. We hypothesise that these discourses influence its application in practice as well as its effectiveness in terms of achieving the above goals. For instance, actors who consider EA as a hindrance to fast implementation of their projects will probably apply it as a mandatory checklist, whereas actors who believe that EA can help to develop more environmentally sound decisions will use EIA as a tool to design their initiatives. In this paper we explore discourses on EA in The Netherlands and elaborate on their implications for EA effectiveness. Based on an innovative research design comprising an online survey with 443 respondents and 20 supplementary semi-structured interviews we conclude that the dominant discourse is that EA is mainly a legal requirement; EAs are conducted because they have to be conducted, not because actors choose to do so. EA effectiveness however seems reasonably high, as a majority of respondents perceive that it enhances environmental awareness and contributes to environmental protection. However, the ‘legal requirement’ discourse also results in decision-makers seldom going beyond what is prescribed by EA and environmental law. Despite its mandatory character, the predominant attitude towards EA is quite positive. For most respondents, EA is instrumental in providing transparency of decision-making and in minimising the legal risks of not complying with environmental laws. Differences in discourses seldom reflect extreme opposites. The ‘common ground’ regarding EA provides a good basis for working with EA in terms of meeting legal requirements but at the same time does not stimulate creativity in decision-making or optimisation of environmental values. In countries characterised by less

Assessment of chemical exposures: calculation methods for environmental professionals

National Research Council Canada - National Science Library

Daugherty, Jack E

1997-01-01

... on by scientists, businessmen, and policymakers. Assessment of Chemical Exposures: Calculation Methods for Environmental Professionals addresses the expanding scope of exposure assessments in both the workplace and environment...

Investigating Dry Deposition of Ozone to Vegetation

Science.gov (United States)

Silva, Sam J.; Heald, Colette L.

2018-01-01

Atmospheric ozone loss through dry deposition to vegetation is a critically important process for both air quality and ecosystem health. The majority of atmospheric chemistry models calculate dry deposition using a resistance-in-series parameterization by Wesely (1989), which is dependent on many environmental variables and lookup table values. The uncertainties contained within this parameterization have not been fully explored, ultimately challenging our ability to understand global scale biosphere-atmosphere interactions. In this work, we evaluate the GEOS-Chem model simulation of ozone dry deposition using a globally distributed suite of observations. We find that simulated daytime deposition velocities generally reproduce the magnitude of observations to within a factor of 1.4. When correctly accounting for differences in land class between the observations and model, these biases improve, most substantially over the grasses and shrubs land class. These biases do not impact the global ozone burden substantially; however, they do lead to local absolute changes of up to 4 ppbv and relative changes of 15% in summer surface concentrations. We use MERRA meteorology from 1979 to 2008 to assess that the interannual variability in simulated annual mean ozone dry deposition due to model input meteorology is small (generally less than 5% over vegetated surfaces). Sensitivity experiments indicate that the simulation is most sensitive to the stomatal and ground surface resistances, as well as leaf area index. To improve ozone dry deposition models, more measurements are necessary over rainforests and various crop types, alongside constraints on individual depositional pathways and other in-canopy ozone loss processes.

Assessing the environmental impacts of freshwater consumption in LCA.

Science.gov (United States)

Pfister, Stephan; Koehler, Annette; Hellweg, Stefanie

2009-06-01

A method for assessing the environmental impacts of freshwater consumption was developed. This method considers damages to three areas of protection: human health, ecosystem quality, and resources. The method can be used within most existing life-cycle impact assessment (LCIA) methods. The relative importance of water consumption was analyzed by integrating the method into the Eco-indicator-99 LCIA method. The relative impact of water consumption in LCIA was analyzed with a case study on worldwide cotton production. The importance of regionalized characterization factors for water use was also examined in the case study. In arid regions, water consumption may dominate the aggregated life-cycle impacts of cotton-textile production. Therefore, the consideration of water consumption is crucial in life-cycle assessment (LCA) studies that include water-intensive products, such as agricultural goods. A regionalized assessment is necessary, since the impacts of water use vary greatly as a function of location. The presented method is useful for environmental decision-support in the production of water-intensive products as well as for environmentally responsible value-chain management.

Klickitat Cogeneration Project: Final environmental assessment

International Nuclear Information System (INIS)

1994-09-01

To meet BPA's contractual obligation to supply electrical power to its customers, BPA proposes to acquire power generated by Klickitat Cogeneration Project. BPA has prepared an environmental assessment evaluating the proposed project. Based on the EA analysis, BPA's proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 for the following reasons: (1)it will not have a significant impact land use, upland vegetation, wetlands, water quality, geology, soils, public health and safety, visual quality, historical and cultural resources, recreation and socioeconomics, and (2) impacts to fisheries, wildlife resources, air quality, and noise will be temporary, minor, or sufficiently offset by mitigation. Therefore, the preparation of an environmental impact statement is not required and BPA is issuing this FONSI (Finding of No Significant Impact)

Klickitat Cogeneration Project : Final Environmental Assessment.

Energy Technology Data Exchange (ETDEWEB)

United States. Bonneville Power Administration; Klickitat Energy Partners

1994-09-01

To meet BPA`s contractual obligation to supply electrical power to its customers, BPA proposes to acquire power generated by Klickitat Cogeneration Project. BPA has prepared an environmental assessment evaluating the proposed project. Based on the EA analysis, BPA`s proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 for the following reasons: (1)it will not have a significant impact land use, upland vegetation, wetlands, water quality, geology, soils, public health and safety, visual quality, historical and cultural resources, recreation and socioeconomics, and (2) impacts to fisheries, wildlife resources, air quality, and noise will be temporary, minor, or sufficiently offset by mitigation. Therefore, the preparation of an environmental impact statement is not required and BPA is issuing this FONSI (Finding of No Significant Impact).

Cancer risk assessments and environmental regulation

International Nuclear Information System (INIS)

Scroggin, D.G.

1990-01-01

Governmental regulation of toxic substances, such as carcinogens and radiation, prompts both legal and scientific controversies. Industry, environmental activist groups, government regulators, and the general public are all concerned with the question of how environmental risk to public health is to be measured and what level of risk warrants government action under the environmental laws. Several recent events shed light on the fundamental scientific and legal problems inherent in such regulation, and these events may affect the direction of future developments. These events include implementation of generic Risk Assessment Guidelines by the US EPA, litigation challenging EPA's regulation of carcinogenic substances, new scientific understanding of the relative risks from human exposure to natural and man-made sources, and the continuing growth of toxic tort litigation in which victims of cancer seek large damages from industrial emitters of pollution

Assessing High School Students’ Pro-Environmental Behaviour

Science.gov (United States)

Hidayah, N.; Agustin, R. R.

2017-09-01

This paper aims to reveal students’ pro-environmental behavior in a High School. Self-reported behavior assessment was administered in this study involving students with age range 15 to 18 years. Pro-environmental behavior in this study comprises six domains. Those are recycling, waste avoidance, consumerism, energy conservation, mobility and transportation, and vicarious conservation behavior. Pro-environmental behavior (PEB) of science class students was compared to behavior of non-science class students. Effect of students’ grade level and extracurricular activity on the behavior was evaluated. Study revealed that science could improve students’ PEB. It is because environmental topics are covered in science class. Student’s involvement in extracurricular activity may enhance PEB as well. In conclusion, students’ PEB is influenced by class program (science or non-science) but it is not influenced by time length in learning science. This finding could be consider by science educator in choosing strategy to enhance student’s pro-environmental behaviour.

Environmental impact assessment of conventional and organic milk production

NARCIS (Netherlands)

Boer, de I.J.M.

2003-01-01

Organic agriculture addresses the public demand to diminish environmental pollution of agricultural production. Until now, however, only few studies tried to determine the integrated environmental impact of conventional versus organic production using life cycle assessment (LCA). The aim of this

Idaho National Engineering and Environmental Laboratory Wildland Fire Management Environmental Assessment

Energy Technology Data Exchange (ETDEWEB)

Irving, John S

2003-04-01

DOE prepared an environmental assessment (EA)for wildland fire management activities on the Idaho National Engineering and Environmental Laboratory (INEEL) (DOE/EA-1372). The EA was developed to evaluate wildland fire management options for pre-fire, fire suppression, and post fire activities. Those activities have an important role in minimizing the conversion of the native sagebrush steppe ecosystem found on the INEEL to non-native weeds. Four alternative management approaches were analyzed: Alternative 1 - maximum fire protection; Alternative 2 - balanced fire protection; Alternative 2 - balanced fire protection; Alternative 3 - protect infrastructure and personnel; and Alternative 4 - no action/traditional fire protection.

Environmental management assessment of the Lawrence Livermore National Laboratory Livermore, California

International Nuclear Information System (INIS)

1994-06-01

This report documents the results of the Environmental Management Assessment performed at the Lawrence Livermore National Laboratory (LLNL), Livermore, CA. LLNL is operated by the University of California (UC) under contract with the U.S. Department of Energy (DOE). Major programs at LLNL include research, development, and test activities associated with the nuclear design aspects of the nuclear weapons life cycle and related national security tasks; inertial confinement fusion; magnetic fusion energy; biomedical and environmental research; laser isotope separation; energy-related research; beam research physics; and support to a variety of Defense and other Federal agencies. During this assessment, activities and records were reviewed and interviews were conducted with personnel from management and operating contractor, Lawrence Livermore National Laboratory; DOE Oakland Operations Office; and DOE Headquarters Program Offices, including the Office of Defense Programs, Office of Environmental Management, the Office of Nuclear Energy, and the Office of Energy Research. The onsite portion was conducted in June 1994, by the DOE Office of Environmental Audit. The goal of EH-24 is enhancement of environmental protection and minimization of risk to public health and the environment. EH-24 accomplishes its mission using systematic and periodic evaluations of DOE's environmental programs within line organizations, and through use of supplemental activities that strengthen self-assessment and oversight functions within program, field, and contractor organizations. The Environmental Management Assessment of LLNL revealed that LLNL's environmental program is exemplary within the DOE complex and that all levels of LLNL management and staff consistently exhibit a high level of commitment to achieve environmental excellence

The use of environmental assessments in the Brae field development

International Nuclear Information System (INIS)

Grogan, W.C.

1991-01-01

This paper reviews the principle environmental aspects associated with North Sea offshore oil and gas development and through the case history of Marathon Oil UK's Brae Field Development illustrates the scope and function of environmental assessments as applied to offshore developments. Details of the approach taken are described including the chronological evolution of the scope and aims of individual assessments. Examples of discharge inventory preparation, effluent and receiving environment monitoring programs, audits and inspections and procedures are described. The role of these components in the development of environmental management systems is discussed

Promoting compliance at DOE: Tiger team assessments and environmental audits

International Nuclear Information System (INIS)

Green, R.S.; Crawford, V.I.

1993-01-01

The Office of Environmental Audit, within the Department of Energy's Office of Environment, Safety and Health, has effected positive environmental results across the DOE complex. Beginning in the mid 1980's, a concerted effort was established by DOE upper management to achieve environmental consciousness and responsibility. The Office of Environmental Audit was established to conduct and Environmental survey to define environmental problems caused by 40 years of operation at DOE production and research facilities. The Office provided initial identification of DOE sites requiring environmental restoration and assured plans were developed to address these environmental problems. Initiated by massive problems in the environmental operations at DOE's Rocky Flats Plant in Colorado, Tiger Team Assessments (TTA) followed. TTAs established a compliance baseline and evaluated management with respect to environment, safety, and health. The Tiger Teams assured plans were established to correct deficiencies including root causes. As part of this comprehensive effort, the Office of Environmental Audit led the environmental component of the TTAs. With TTAs completed, the Office's future vision entails addressing new environmental regulations and world changes affecting DOE operations. To proactively continue its efforts to effect positive environmental change, the Office is headed toward a comprehensive cross-cutting program that conducts environmental management assessments, reassesses the environmental progress of formerly audited facilities, and evaluates special focuses environmental issues that span across the DOE complex. Through these efforts, the Office of Environmental Audit will determine the environmental activities which address environmental problems and identify environmental problems requiring resolution. Following trending analyses, the Office will disseminate information describing mechanisms to pursue and pitfalls to avoid to achieve environmental excellence

Environmental assessment methodologies for sea dumping of radioactive wastes

International Nuclear Information System (INIS)

1984-01-01

This document, which describes the content of an environmental assessment report, will assist national authorities to meet their obligations under the London Dumping Convention (LDC, 1972) by initiating those steps which are to be undertaken to ensure that ''the procedure to be followed and the nature of such reports shall be agreed by the parties in consultation'' (Article VI. 4). In the context of sea disposal of radioactive wastes, environmental assessments are taken to mean those evaluations which are undertaken to assist in the decision-making processes used by national authorities to determine: 1) How the option of sea disposal compares environmentally, technically, socially and economically with other disposal options (this constitutes the comparison with land-based alternatives); and 2) Whether the impact of a proposed sea disposal option is acceptable (this requires a detailed evaluation of the proposed operation including site selection, quantities and types of waste to be dumped, operational requirements and calculation of radiological and other risks). The term ''environmental assessment'' in these respects is deemed to include both the evaluation of the impact of sea dumping and the document that describes this evaluation

Environmental assessment of incinerator residue utilisation.

Science.gov (United States)

Toller, S; Kärrman, E; Gustafsson, J P; Magnusson, Y

2009-07-01

Incineration ashes may be treated either as a waste to be dumped in landfill, or as a resource that is suitable for re-use. In order to choose the best management scenario, knowledge is needed on the potential environmental impact that may be expected, including not only local, but also regional and global impact. In this study, A life cycle assessment (LCA) based approach was outlined for environmental assessment of incinerator residue utilisation, in which leaching of trace elements as well as other emissions to air and water and the use of resources were regarded as constituting the potential environmental impact from the system studied. Case studies were performed for two selected ash types, bottom ash from municipal solid waste incineration (MSWI) and wood fly ash. The MSWI bottom ash was assumed to be suitable for road construction or as drainage material in landfill, whereas the wood fly ash was assumed to be suitable for road construction or as a nutrient resource to be recycled on forest land after biofuel harvesting. Different types of potential environmental impact predominated in the activities of the system and the use of natural resources and the trace element leaching were identified as being relatively important for the scenarios compared. The scenarios differed in use of resources and energy, whereas there is a potential for trace element leaching regardless of how the material is managed. Utilising MSWI bottom ash in road construction and recycling of wood ash on forest land saved more natural resources and energy than when these materials were managed according to the other scenarios investigated, including dumping in landfill.

Bridging Arctic environmental science and life cycle assessment

DEFF Research Database (Denmark)

Johnsen, Fredrik Moltu

2014-01-01

Current research aims to make the impact assessment module of life cycle assessment (LCA) less site-generic and thus more relevant to particular regions. The Arctic region attracts its share of interest when it comes to environmental issues, but little research has been performed with the explicit...

Environmental Accounting: Concepts, Practive and Assessment of Sustainable Development

OpenAIRE

Vardon, Michael; Harrison, Bob

2002-01-01

Quantitative assessment of sustainable development requires accounting for the depletion and degradation of natural resources and other environmental impacts of economic development. The United Nations System of Integrated Economic and Environmental Accounting (SEEA) provides a system that links economic activities to changes in the environment and natural resources. SEEA has guided the development of environmental accounts by the Australian Bureau of Statistics. This paper describes how SEEA...

Comfort monitoring? Environmental assessment follow-up under community-industry negotiated environmental agreements

International Nuclear Information System (INIS)

Noble, Bram; Birk, Jasmine

2011-01-01

Negotiated environmental agreements are becoming common practice in the mining industry. In principle, negotiated environmental agreements are said to respond to many of the shortcomings of environmental impact assessment by providing for improved follow-up of project impacts through, among other things, data provision, engaging stakeholders in the monitoring and management of project impacts, and building capacity at the local level to deal with project-induced environmental change. In practice, however, little is known about the efficacy of follow-up under negotiated environmental agreements between proponents and communities and the demonstrated value added to project impact management. This paper examines follow-up practice under negotiated environmental agreements with a view to understanding whether and how community-based monitoring under privatized agreements actually contributes to improved follow-up and impact management. Based on lessons emerging from recent experiences with environmental agreements in Canada's uranium industry, we show that follow-up under negotiated agreements may be described as 'comfort monitoring'. While such monitoring does improve community-industry relations and enhance corporate image, it does little to support effects-based management. If follow-up under negotiated agreements is to be credible over the long term, there is a need to ensure that monitoring results are useful for, and integrated with, regulatory-based monitoring and project impact management practices.

Study on environmental impact assessment index system of uranium production base construction plan

International Nuclear Information System (INIS)

Liu Xiaochao; Song Liquan

2008-01-01

The index system on planning environmental impact assessment of uranium mining base construction is discussed by using the hiberarchy method according to characteristics of uranium production and environmental protection object of planning assessment. The suggested index system is in favor of persistent exploitation of uranium resource and environmental protection in the uranium mining area, and can provide a reference for planning environmental impact assessment of uranium mining base construction in China. (authors)

Environmental impact assessment for energy pathways: an integrated methodology

International Nuclear Information System (INIS)

Sommereux-Blanc, Isabelle

2010-01-01

This document presents the synthesis of my research work contributing to the development of an integrated methodology of environmental impact assessment for energy pathways. In the context of world globalization, environmental impact assessments issues are highly linked with the following questioning: Which environmental impacts? for which demand? at which location? at which temporal scale? My work is built upon the definition of a conceptual framework able to handle these issues and upon its progressive implementation. The integration of the spatial and temporal issues within the methodology are key elements. Fundamental cornerstones of this framework are presented along the DPSIR concept (Driving forces, Pressures, State, Impacts, Responses). They cover a comprehensive analysis of the limits and the relevance of life cycle analysis and the development of a geo-spatialized environmental performance approach for an electrical production pathway. Perspectives linked with the development of this integrated methodology are detailed for energy pathways. (author)

Environmental assessment of the Chernobyl releases in China

International Nuclear Information System (INIS)

Zunsu, H.

1988-01-01

Since Chernobyl accident, China has rapidly developed a program of emergency preparedness for nuclear accidents that the institute of radiation protection assumes the responsibility together with other institutions. For the nuclear power plants in Qinshan and in Daya Bay, a series of emergency preparedness, including the investigation of conditions and feasibility of some principal protective measures are being carried out. The research program includes atmospheric transfer and dispersion, modelling analysis of accident consequence assessment and development of a computer software system for accident consequence prediction. The strategy of China is to well organize all resources and to broaden the international cooperation. The drafting of national emergency regulations and technical guides and the establishment of specialized technical teams are in progress. In China, the accident consequence assessment is based on the specialist experiences from transfer of radioactive effluents in the atmosphere, in water and in ecological system. On May 1986 environmental assessment of the Chernobyl releases in China and environmental monitoring were carried out. Radio-nuclides released from the Chernobyl accident were detectable in all parts of country but the concentrations were very low. The results of the environmental monitoring have been presented. 7 figs., 11 tabs. (author)

The use of plants for environmental monitoring and assessment.

Science.gov (United States)

Wang, W; Freemark, K

1995-04-01

This paper presents a critical review on phytotoxicity tests for environmental monitoring and assessment. Vascular macrophytes used in the laboratory testing are emphasized; algae are mentioned only for comparison. Several issues are discussed, including the rationale for and misconceptions about phytotoxicity tests, relation to regulation, status of phytotoxicity test protocols, advantages and disadvantages of phytotoxicity tests, and possible research directions. Aquatic and terrestrial macrophytes, along with algae, are essential components of ecosystems. Macrophytes are becoming more important for the monitoring and assessment of herbicides, effluents, and industrial chemicals. In the United States, Canada, and international organizations, phytotoxicity tests can be required for environmental monitoring and assessment in statutes such as Federal Insecticide, Fungicide, and Rodenticide Act; Toxic Substances Control Act; Water Quality Act; Canadian Pest Control Products Act; and Canadian Environmental Protection Act. Possible research directions for phytotoxicity tests are discussed relative to the role in regulations of industrial chemicals, effluents, hazardous waste sites, and pesticides.

77 FR 40322 - Oral Rabies Vaccine Trial; Availability of an Environmental Assessment

Science.gov (United States)

2012-07-09

...] Oral Rabies Vaccine Trial; Availability of an Environmental Assessment AGENCY: Animal and Plant Health... assessment relative to an oral rabies vaccination field trial in New Hampshire, New York, Ohio, Vermont, and West Virginia. The environmental assessment analyzes the use of an experimental rabies vaccine in field...

Environmental Assessment of a Waste Incineration Tax. Case Study and Evaluation of a Framework for Strategic Environmental Assessment

International Nuclear Information System (INIS)

Bjoerklund, Anna; Johansson, Jessica; Nilsson, Maans; Eldh, Peter; Finnveden, Goeran

2003-12-01

A framework for Strategic Environmental Assessment (SEA) is tested in a case study on a proposed waste incineration tax. Also included is testing of developed methods for valuation and site-dependent life cycle impact assessment. The results indicate that although a suggested waste incineration tax of 400 SEK/ton is likely to lead to environmental improvements, these are small compared to the potential improvements as shown in more visionary scenarios. In order to go in this direction a waste incineration tax based on the content of fossil carbon in the waste would be useful. The framework for SEA includes several different pathways. These have different advantages and disadvantages and provide different types of information. It is therefore suggested that they largely complement each other and that the choice of methods should be done in relation to the function of the SEA and the questions asked.

DESIGNING ENVIRONMENTAL MONITORING DATABASES FOR STATISTIC ASSESSMENT

Science.gov (United States)

Databases designed for statistical analyses have characteristics that distinguish them from databases intended for general use. EMAP uses a probabilistic sampling design to collect data to produce statistical assessments of environmental conditions. In addition to supporting the ...

Feasibility study on application of new concept of environmental assessment to nuclear energy

International Nuclear Information System (INIS)

Lee, Young Eal; Lee, Kun Jai

2000-01-01

The existing environmental assessments of nuclear energy are focused on the two kinds of issues such as prevention of green house gas emission and radiological impact assessment. So, the comparative assessment of the other resources such as fossil fuels has been the main part and this result has been the side of nuclear power as the clean energy resource. However, now is when to develop the methodology that approaches to environmental assessment of energy in terms of the various environmental categories. Life Cycle Assessment (LCA) would be the effective environmental assessment tool, which is able to meet the necessity mentioned above. Also classification of the radiological impact and calculation of the environmental impact from the radioactive substances are indispensable as long as the nuclear energy is considered in the application of LCA for the utilization of energy in the industry. However, direct introduction of LCA to the nuclear energy is difficult more or less due to the absence of the methodology for the radiological impact assessment within the LCA framework. Therefore, this study suggests the new concept of environmental assessment. Also current status of development for the classification factor of radiological impact is introduced and investigates the feasibility of application of it to nuclear power generation system

Relevant dimensions for proactive environmental assessment of urban mobility

Directory of Open Access Journals (Sweden)

Julio Alberto Soria Lara

2015-02-01

Full Text Available A reduction of negative environmental impacts in urban transportation (air pollution, energy consumption, etc. is thought to be crucial in promoting sustainable development outcomes in cities, however evidence shows that this objective is hardly achieved in practice. In the case of urban transport planning, the transition to sustainability requests that its performance must be assessed. This has originated important challenges for the academia in providing efficient assessment tools. As a response to these challenges, sustainability assessment has become a rapidly developing area associated with the family of impact assessment tools ((e.g. Environmental Impact Assessment and Strategic Environmental Assessment. In recent years, many countries have conferred to sustainability assessment, and specifically to Environmental Impact Assessment (EIA, an important and decisive role into their planning systems. The effectiveness of the traditional methods for evaluating urban transport plans/interventions (e.g. EIA, EAE, Cost-Benefit Analysis is contested as strongly argued by several academics. A key problem is that these methods currently focus too much on identifying environmental impacts that might happen rather than on finding ways of preventing them from happening. They are used reactively rather than proactively. Underlying this is the belief that traditional evaluation methods have difficulty guiding improvements in urban transport plans and projects in decision-making and their capacity to support technical decisions becomes limited. First, this is a consequence of the fact that the environmental assessment (EA process mainly includes EA-makers and they are not integrated enough in the transport planning process. Second, the used methods not always are the most suitable to identify ways of preventing potential impacts with respect to the particular nature of urban transportation. In seeking to answer these problems, the paper presents a strategy

L-Reactor operation, Savannah River Plant: environmental assessment

International Nuclear Information System (INIS)

1982-08-01

The purpose of this document is to assess the significance of the effects on the human environment of the proposed resumption of L-reactor operation at the Savannah River Plant, scheduled for October 1983. The discussion is presented under the following section headings: need for resumption of L-Reactor operations and purpose of this environmental assessment; proposed action and alternative; affected environment (including, site location and description, land use, historic and archeological resources, socioeconomic and community characteristics, geology and seismology, hydrology, meteorology and climatology, ecology, and radiation environment); environmental consequences; summary of projected L-Reactor releases and impacts; and Federal and State permits and approval. The three appendices are entitled: radiation dose calculation methods and assumptions; floodplain/wetlands assessment - L-Reactor operations; and, conversion table. A list of references is included at the end of each chapter

Quantum chemistry in environmental pesticide risk assessment.

Science.gov (United States)

Villaverde, Juan J; López-Goti, Carmen; Alcamí, Manuel; Lamsabhi, Al Mokhtar; Alonso-Prados, José L; Sandín-España, Pilar

2017-11-01

The scientific community and regulatory bodies worldwide, currently promote the development of non-experimental tests that produce reliable data for pesticide risk assessment. The use of standard quantum chemistry methods could allow the development of tools to perform a first screening of compounds to be considered for the experimental studies, improving the risk assessment. This fact results in a better distribution of resources and in better planning, allowing a more exhaustive study of the pesticides and their metabolic products. The current paper explores the potential of quantum chemistry in modelling toxicity and environmental behaviour of pesticides and their by-products by using electronic descriptors obtained computationally. Quantum chemistry has potential to estimate the physico-chemical properties of pesticides, including certain chemical reaction mechanisms and their degradation pathways, allowing modelling of the environmental behaviour of both pesticides and their by-products. In this sense, theoretical methods can contribute to performing a more focused risk assessment of pesticides used in the market, and may lead to higher quality and safer agricultural products. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Industrially synthesized single-walled carbon nanotubes: compositional data for users, environmental risk assessments, and source apportionment

Energy Technology Data Exchange (ETDEWEB)

Plata, D L; Gschwend, P M [Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Reddy, C M [Department of Marine Chemistry and Geochemistry, Woods Hole Oceanographic Institution, Woods Hole, MA 02543 (United States)], E-mail: dplata@whoi.edu

2008-05-07

Commercially available single-walled carbon nanotubes (SWCNTs) contain large percentages of metal and carbonaceous impurities. These fractions influence the SWCNT physical properties and performance, yet their chemical compositions are not well defined. This lack of information also precludes accurate environmental risk assessments for specific SWCNT stocks, which emerging local legislation requires of nanomaterial manufacturers. To address these needs, we measured the elemental, molecular, and stable carbon isotope compositions of commercially available SWCNTs. As expected, catalytic metals occurred at per cent levels (1.3-29%), but purified materials also contained unexpected metals (e.g., Cu, Pb at 0.1-0.3 ppt). Nitrogen contents (up to 0.48%) were typically greater in arc-produced SWCNTs than in those derived from chemical vapor deposition. Toluene-extractable materials contributed less than 5% of the total mass of the SWCNTs. Internal standard losses during dichloromethane extractions suggested that metals are available for reductive dehalogenation reactions, ultimately resulting in the degradation of aromatic internal standards. The carbon isotope content of the extracted material suggested that SWCNTs acquired much of their carbonaceous contamination from their storage environment. Some of the SWCNTs, themselves, were highly depleted in {sup 13}C relative to petroleum-derived chemicals. The distinct carbon isotopic signatures and unique metal 'fingerprints' may be useful as environmental tracers allowing assessment of SWCNT sources to the environment.

Modeled Wet Nitrate Deposition

Data.gov (United States)

U.S. Environmental Protection Agency — Modeled data on nitrate wet deposition was obtained from Dr. Jeff Grimm at Penn State Univ. Nitrate wet depostion causes acidification and eutrophication of surface...

Environmental impact assessment of man-made cellulose fibres

NARCIS (Netherlands)

Shen, L.; Worrell, E.; Patel, M.K.

2010-01-01

Man-made cellulose fibres have played an important role in the production of textile products for more than 70 years. The purpose of this study is to assess the environmental impact of man-made cellulose fibres. Life cycle assessment (LCA) was conducted for three types of fibres (i.e. Viscose, Modal

An environmental impact assessment system for agricultural R and D

International Nuclear Information System (INIS)

Rodrigues, Geraldo Stachetti; Campanhola, Clayton; Kitamura, Paulo Choji

2003-01-01

A strategic planning process has been implemented at the Brazilian Agricultural Research Agency (Embrapa) to introduce sustainable agriculture concepts in all steps of Research and Development (R and D). An essential part of the devised mission statement called for the impact assessment of all technology innovation resulting from R and D, under field conditions (ex-post). However, methods for impact assessment of technology innovations at the farmstead level appropriate for the institutional context were lacking. The environmental impact assessment (EIA) system (AMBITEC-AGRO) developed to attend that demand is composed by a set of weighing matrices constructed in an electronic spreadsheet. Impact indicators are evaluated in the field in an interview/survey, and weighed according to their spatial scale and importance toward effecting environmental impacts. The results of these weighing procedures are expressed graphically in the assessment spreadsheets. Finally, the indicator evaluations are composed into an Environmental Impact Index for the agricultural technology innovation

Discussion on the method of environmental radiological impact assessment for the highway construction project

International Nuclear Information System (INIS)

Qiu Guohua

2008-01-01

Based on the characteristics and environmental radiological impact of the highway construction project, the basic procedure of environmental radiological impact assessment for the highway construction project is put forward, including analysis and determination of contamination sources, selection of evaluation factors, determination of assessment range and dose limit, environmental investigation, environmental impact prediction and assessment. The working method of each procedure is analyzed. (authors)

Environmental assessment: South microwave communication facilities

Energy Technology Data Exchange (ETDEWEB)

1989-06-01

Western Area Power Administration (Western) is proposing to construct, operate, and maintain eight microwave repeater stations in southwestern Colorado, southeastern Utah, and northern Arizona, in order to meet the minimum fade criteria established by the Western Systems Coordinating Council (WSCC) for the operation and protection of electric power systems. The proposed microwave facilities would increase the reliability of communication. This environmental assessment (EA) describes the existing environmental conditions and the impacts from construction of the eight microwave communication facilities. The EA was prepared in compliance with the National Environmental Policy Act of 1969, the Council on Environmental Quality Regulations (40 CFR 1500-1508), and the Department of Energy Guidelines (52 FR 47662, December 15, 1987). The proposed project would consist of constructing eight microwave facilities, each of which would include a self-supported lattice tower, an equipment building, a propane tank, distribution lines to provide electric power to the sites, and access roads to the sites. The facilities would be constructed in San Miguel and Montezuma Counties in Colorado, San Juan County, Utah, and Navajo, Apache, Coconino, and Yavapai Counties in Arizona. 20 refs., 2 figs., 2 tabs.

Evolution of Ore Deposits and Technology Transfer Project: Isotope and Chemical Methods in Support of the U.S. Geological Survey Science Strategy, 2003-2008

Science.gov (United States)

Rye, Robert O.; Johnson, Craig A.; Landis, Gary P.; Hofstra, Albert H.; Emsbo, Poul; Stricker, Craig A.; Hunt, Andrew G.; Rusk, Brian G.

2010-01-01

Principal functions of the U.S. Geological Survey (USGS) Mineral Resources Program are providing assessments of the location, quantity, and quality of undiscovered mineral deposits, and predicting the environmental impacts of exploration and mine development. The mineral and environmental assessments of domestic deposits are used by planners and decisionmakers to improve the stewardship of public lands and public resources. Assessments of undiscovered mineral deposits on a global scale reveal the potential availability of minerals to the United States and other countries that manufacture goods imported to the United States. These resources are of fundamental relevance to national and international economic and security policy in our globalized world economy. Performing mineral and environmental assessments requires that predictions be made of the likelihood of undiscovered deposits. The predictions are based on geologic and geoenvironmental models that are constructed for the diverse types of mineral deposits from detailed descriptions of actual deposits and detailed understanding of the processes that formed them. Over the past three decades the understanding of ore-forming processes has benefited greatly from the integration of laboratory-based geochemical tools with field observations and other data sources. Under the aegis of the Evolution of Ore Deposits and Technology Transfer Project (referred to hereinafter as the Project), a 5-year effort that terminated in 2008, the Mineral Resources Program provided state-of-the-art analytical capabilities to support applications of several related geochemical tools to ore-deposit-related studies. The analytical capabilities and scientific approaches developed within the Project have wide applicability within Earth-system science. For this reason the Project Laboratories represent a valuable catalyst for interdisciplinary collaborations of the type that should be formed in the coming years for the United States to meet

Progress in reducing the environmental impacts of offshore drilling wastes

International Nuclear Information System (INIS)

Flemming, D; Candler, J.E.

2002-01-01

Full text:Over the past several years, great progress has been made in understanding and reducing the environmental impacts of offshore drilling wastes. Our understanding of sea floor impacts has been helped along by new environmental assessment tools such us computer modeling of sea floor deposition of drilling discharges, sediment profile imaging, and in situ sediment toxicity bioassays. To further reduce environmental impacts, new pollution prevention technologies have been developed that can shrink the environmental footprint of offshore drilling. These technologies reduce the total amount of drilling wastes discharged and include cuttings dryers and centrifuges that can reduce the drilling fluid content of drill cuttings to below 10 percent. In conclusion, the oil and gas industry is adopting more environmentally compatible drilling fluids, new environmental assessment tools and pollution prevention technologies that dramatically reduce the amount of drilling wastes discharged. Together, all of these elements have the potential to reduce environmental impacts of offshore drilling

Eastern forest environmental threat assessment center

Science.gov (United States)

Southern Research Station. USDA Forest Service

2010-01-01

The Eastern Forest Environmental Threat Assessment Center (EFETAC) provides the latest research and expertise concerning threats to healthy forests – such as insects and disease, wildland loss, invasive species, wildland fire, and climate change – to assist forest landowners, managers and scientists throughout the East. Established in 2005, EFETAC is a joint effort of...

76 FR 37770 - Monsanto Co.; Availability of Petition, Plant Pest Risk Assessment, and Environmental Assessment...

Science.gov (United States)

2011-06-28

...] Monsanto Co.; Availability of Petition, Plant Pest Risk Assessment, and Environmental Assessment for... available for public comment the Monsanto petition, our plant pest risk assessment, and our draft... plant pest risk assessment are also available on the APHIS Web site at: http://www.aphis.usda.gov/brs...