WorldWideScience

Sample records for dentistry demonstration program

  1. Teacher and Principal Survey Results in the National Preventive Dentistry Demonstration Program.

    Science.gov (United States)

    Klein, Stephen P.; And Others

    The National Preventive Dentistry Demonstration Program was conducted to assess the costs and benefits of combinations of school-based preventive dental care procedures. The program involved almost 30,000 elementary school children from 10 sites across the country. Classroom procedures, such as weekly fluoride mouthrinse, were administered or…

  2. Cost of Treatment Procedures in the National Preventive Dentistry Demonstration Program.

    Science.gov (United States)

    Foch, Craig B.; And Others

    The National Preventive Dentistry Demonstration Program (NPDDP) delivered five different regimens of school based preventive dental care to groups of children in 10 American cities between 1977 and 1981. All clinical techniques employed had previously been demonstrated to be both safe and effective in clinical trials. The purpose of the NPDDP was…

  3. A Cost Analysis Plan for the National Preventive Dentistry Demonstration Program.

    Science.gov (United States)

    Foch, Craig B.

    The National Preventive Dentistry Demonstration Project (NPDDP) delivers school-based preventive dental care to approximately 14,000 children in ten United States cities. The program, begun in 1976, is to be conducted over a six and one-half year period. The costing definitions and allocation rules to be used in the project are the principal…

  4. Dentistry: Careers in Dentistry

    Science.gov (United States)

    ... in Dentistry e-mail Print Share Careers in Dentistry A dental education opens up a world of ... accredited training programs in your area . Careers in Dentistry Be a Dentist General Dentistry Dental Specialties Dental ...

  5. Opinions of practitioners and program directors concerning accreditation standards for postdoctoral pediatric dentistry training programs.

    Science.gov (United States)

    Casamassimo, P S; Wilson, S

    1999-01-01

    This study was performed to assess opinions of program directors and practitioners about the importance and necessary numbers of experiences required by current accreditation standards for training of pediatric dentists. A 32-item questionnaire was sent to all program directors of ADA-accredited postdoctoral pediatric dentistry training programs and to a random sample of 10% of the fellow/active membership of the American Academy of Pediatric Dentistry. An overall response rate of 56% was obtained from the single mailing. Practitioners and program directors differed significantly (P dentistry: initiating and completing a research paper, biostatistics/epidemiology, and practice management. Program directors had little difficulty obtaining required experiences, and program dependence on Medicaid did not negatively affect quality of education. Practitioners and program directors agreed on the importance of most experiences and activities required by current accreditation standards.

  6. Fuel Cell Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    Gerald Brun

    2006-09-15

    In an effort to promote clean energy projects and aid in the commercialization of new fuel cell technologies the Long Island Power Authority (LIPA) initiated a Fuel Cell Demonstration Program in 1999 with six month deployments of Proton Exchange Membrane (PEM) non-commercial Beta model systems at partnering sites throughout Long Island. These projects facilitated significant developments in the technology, providing operating experience that allowed the manufacturer to produce fuel cells that were half the size of the Beta units and suitable for outdoor installations. In 2001, LIPA embarked on a large-scale effort to identify and develop measures that could improve the reliability and performance of future fuel cell technologies for electric utility applications and the concept to establish a fuel cell farm (Farm) of 75 units was developed. By the end of October of 2001, 75 Lorax 2.0 fuel cells had been installed at the West Babylon substation on Long Island, making it the first fuel cell demonstration of its kind and size anywhere in the world at the time. Designed to help LIPA study the feasibility of using fuel cells to operate in parallel with LIPA's electric grid system, the Farm operated 120 fuel cells over its lifetime of over 3 years including 3 generations of Plug Power fuel cells (Lorax 2.0, Lorax 3.0, Lorax 4.5). Of these 120 fuel cells, 20 Lorax 3.0 units operated under this Award from June 2002 to September 2004. In parallel with the operation of the Farm, LIPA recruited government and commercial/industrial customers to demonstrate fuel cells as on-site distributed generation. From December 2002 to February 2005, 17 fuel cells were tested and monitored at various customer sites throughout Long Island. The 37 fuel cells operated under this Award produced a total of 712,635 kWh. As fuel cell technology became more mature, performance improvements included a 1% increase in system efficiency. Including equipment, design, fuel, maintenance

  7. A review of pediatric dentistry program websites: what are applicants learning about our programs?

    Science.gov (United States)

    Lin, Jenn-Yih; Lee, Jung; Davidson, Bo; Farquharson, Kara; Shaul, Cheryl; Kim, Sara

    2010-06-01

    The purpose of this study was twofold: 1) to examine website content provided by U.S. and Canadian pediatric dentistry residency programs, and 2) to understand aspects of program websites that dental students report to be related to their interests. Sixty-eight program websites were reviewed by five interprofessional evaluators. A thirty-six-item evaluation form was organized into 1) program descriptive items listed on the American Academy of Pediatric Dentistry (AAPD) website (n=21); 2) additional program descriptive items not listed on the AAPD website but of interest (n=9); and 3) items related to website interface design (n=5). We also surveyed fifty-four dental students regarding their interest in various aspects of program descriptions. The results of this study suggest that pediatric dentistry residency programs in general tend to provide identical or less information than what is listed on the AAPD website. The majority of respondents (76 percent) reported that residency program websites would be their first source of information about advanced programs. The greatest gap between the available website information and students' interests exists in these areas: stipend and tuition information, state licensure, and program strengths. Pediatric dentistry residency programs underutilize websites as a marketing and recruitment tool and should incorporate more information in areas of students' priority interests.

  8. Current Status of Postdoctoral and Graduate Programs in Dentistry.

    Science.gov (United States)

    Assael, Leon

    2017-08-01

    Advanced dental education has evolved in the context of societal needs and economic trends to its current status. Graduate programs have positioned their role in the context of health systems and health science education trends in hospitals, interprofessional clinical care teams, and dental schools and oral health care systems. Graduate dental education has been a critical factor in developing teams in trauma care, craniofacial disorders, pediatric and adult medicine, and oncology. The misalignment of the mission of graduate dental programs and the demands of private practice has posed a challenge in the evolution of programs as educational programs have been directed towards tertiary and indigent care while the practice community focuses on largely healthy affluent patients for complex clinical interventions. Those seeking graduate dental education today are smaller in number and include more international dental graduates than in the past. Graduate dental education in general dentistry and in the nine recognized dental specialties now includes Commission on Dental Accreditation (CODA) recognition of training standards as part of its accreditation process and a CODA accreditation process for areas of clinical education not recognized as specialties by the American Dental Association. Current types of programs include fellowship training for students in recognized specialties. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

  9. Attitudes of program directors toward women in pediatric dentistry training programs.

    Science.gov (United States)

    Seale, N S; Waggoner, W F

    1992-01-01

    The number of women entering pediatric dentistry graduate programs is increasing. A formal survey was conducted in the fall of 1990 to determine what impact, if any, this increase is having on the programs. The survey sample consisted of the 57 pediatric dentistry graduate program directors from the United States and Canada. The survey form included program data about gender distribution in the current and previous classes, and female faculty distribution within the programs. The survey requested information about the attitudes of various groups of individuals who interacted with the residents relative to the gender of the resident and again, relative to whether the resident was pregnant. Inquiry was made concerning maternity leave policies and selected treatment scenarios involving pregnant residents. Finally, questions were asked about motivational factors, personal priorities, and policy change for female vs. male residents. Fifty forms were returned for a return rate of 88%. The 48 forms analyzed revealed that 52% of current classes are female and 51% of applicants for 1991 were female. Women comprise 23% of full-time and 26% of part-time faculty. There was no single issue perceived by program directors as a group to be a significant concern or problem relating to gender. Program directors would consider removing pregnant females from contact with combative patients (83%) and environmental hazards (85%), but fewer would consider removing them from contact with for HIV+ or Hb+ patients.

  10. Performance Demonstration Program Management Plan

    International Nuclear Information System (INIS)

    2005-01-01

    To demonstrate compliance with the Waste Isolation Pilot Plant (WIPP) waste characterization program, each testing and analytical facility performing waste characterization activities participates in the Performance Demonstration Program (PDP). The PDP serves as a quality control check against expected results and provides information about the quality of data generated in the characterization of waste destined for WIPP. Single blind audit samples are prepared and distributed by an independent organization to each of the facilities participating in the PDP. There are three elements within the PDP: analysis of simulated headspace gases, analysis of solids for Resource Conservation and Recovery Act (RCRA) constituents, and analysis for transuranic (TRU) radionuclides using nondestructive assay (NDA) techniques. Because the analysis for TRU radionuclides using NDA techniques involves both the counting of drums and standard waste boxes, four PDP plans are required to describe the activities of the three PDP elements. In accordance with these PDP plans, the reviewing and approving authority for PDP results and for the overall program is the CBFO PDP Appointee. The CBFO PDP Appointee is responsible for ensuring the implementation of each of these plans by concurring with the designation of the Program Coordinator and by providing technical oversight and coordination for the program. The Program Coordinator will designate the PDP Manager, who will coordinate the three elements of the PDP. The purpose of this management plan is to identify how the requirements applicable to the PDP are implemented during the management and coordination of PDP activities. The other participants in the program (organizations that perform site implementation and activities under CBFO contracts or interoffice work orders) are not covered under this management plan. Those activities are governed by the organization's quality assurance (QA) program and procedures or as otherwise directed by CBFO.

  11. Self-Regulated Learning Using Multimedia Programs in Dentistry Postgraduate Students: A Multimethod Approach

    Science.gov (United States)

    Lloret, Miguel; Aguila, Estela; Lloret, Alejandro

    2009-01-01

    The purpose of this study was to study the effect of a multimedia computing program on the production of activities and self-regulated learning processes in 18 students of the Dentistry postdegree (Celaya, Mexico). A multi-method design (quasi-experimental, pretest-post-test and qualitative: Think aloud protocol) was used. Self-regulated…

  12. Experience and policy implications of children presenting with dental emergencies to US pediatric dentistry training programs.

    Science.gov (United States)

    Edelstein, Burton; Vargas, Clemencia M; Candelaria, Devanie; Vemuri, Maryen

    2006-01-01

    The purpose of this study was to describe and substantiate the experience of children, their families, and their caregivers with children's dental pain and to explore implications of these experiences for public policy. Data for 301 children presenting to 35 pediatric dentistry training programs during a 1-week period in 2000 for pain relief were collected with a questionnaire asking for: (1) sociodemographic characteristics; (2) oral health status; (3) dental care history; (4) presenting problem; (5) clinical findings; and (6) clinical disposition. Descriptive statistics are presented. Among children presenting to training programs with oral pain, 28% were under age 6, 57% were on Medicaid, and 38% were regarded by their dentists to have "likely or obvious" functional impairment-with 22% reporting the highest pain level. Parents reported that 59% had "poor or fair oral health" and 29% had a prior dental emergency in the previous year. Pain, experienced for several days by 73% of children, was associated with difficulty: (1) eating; (2) sleeping; (3) attending school; and (4) playing. Parent-reported barriers to seeking dental care included: (1) missed work (24%); (2) transportation costs (12%); and (3) arranging child care (10%). In this study of children with dental pain, many suffered significant pain: (1) duration; (2) intensity; (3) recurrence; and (4) consequences. This study demonstrates the ongoing need for public policies that assure timely, comprehensive, and affordable dental care for vulnerable children.

  13. Alternative Strategies for Funding a General Dentistry Residency Program.

    Science.gov (United States)

    Kralewski, John E.; Wiggins, Carla

    1987-01-01

    Three alternative program funding approaches used in other professions are examined: (1) the reorientation of selected dental schools toward graduate education, (2) emphasizing and marketing the service aspects of the programs, and (3) developing education programs as in-house training for large organizations. (MSE)

  14. Perspectives of Residents of Mashhad School of Dentistry about the Curriculum of Residency Program

    Directory of Open Access Journals (Sweden)

    Javad Sarabadani

    2015-09-01

    Full Text Available Introduction: This study was carried out to analyze the viewpoint of the residents of school of dentistry about the curriculum presented in the residency program to students of Mashhad School of Dentistry. Methods: To evaluate the perspectives of residents of dental school about the curriculum and regulations of residency program, a questionnaire was designed whose validity and reliability were confirmed by the authorities of School of Dentistry and test-retest reliability, respectively. The questionnaire was distributed among 100 residents and 80 of them completed the questionnaires. The data were analyzed by SPSS software (version 11.5. Results: A total of 43% of residents were informed of the curriculum (e.g. academic leave, transfer, removal of semester, etc.. As for the ability to write research proposal, 42.7% of residents were reported to have a favorable status, i.e. they were able to write more than 80% of their proposal. From among the residents, 30.4% had specialized English language certificate. Most of them (77% were satisfied with the professional staff, faculty members, of the faculty. Many students liked to participate in the teaching method courses of the residency program. Conclusion: Residents maintained that the curriculum in such domains as educational and research issues and special capabilities had some weak points. Thus, appropriate strategies are recommended to be applied to revise the curriculum using the residents’ views on these programs.

  15. Introduction of problem-based learning in undergraduate dentistry program in Nepal

    OpenAIRE

    Rimal, Jyotsna; Paudel, Bishnu Hari; Shrestha, Ashish

    2015-01-01

    Context: Problem-based learning (PBL) is a methodology widely used in medical education and is growing in dental education. Initiation of new ideas and teaching methods requires a change in perception from faculty and institute management. Student-centered education is a need of the day and PBL provides the best outlet to it. Aim: To introduce PBL, assess feasibility and challenges in undergraduate dentistry program and evaluate the impact on their learning. Settings and Design: PBL was used ...

  16. Web‐based interactive learning programs for dentistry concept and its evaluation

    Directory of Open Access Journals (Sweden)

    Jitka Feberová

    2013-06-01

    Full Text Available The change in pedagogy relates partly to the development of electronic media and communication possibilities that are available in networked environments. This new technology dominates and supports the international educational content and learning. The aim of our study was to evaluate this progress in dental edu­cation. The education was compared parallel in two groups of Czech and international students. Groups and teaching hours were in the fourth year of the MD curriculum. Stomatology course materials were prepared and published on the portals of the individual dental study programs (http://dl.cuni.cz. The lectures had different access levels, ranging from materials that were freely available to all International WEB dental faculties’ sources to materials that were accessible only after receiving permission from the authors. A number of software tools were used for the creation of ­e-learning courses, such as, e.g., WebCT, Blackboard, Adobe Connect or Microsoft Class Server. The 291 students who were included in our study were divided into two groups according to the ­e-learning program. The goal of our study was to check student activities during the educational process, namely online work – lessons, articles, videos, lite­rature, quizzes and direct Internet access. The statisticaly significant differences were found in the results of the questionnaire based on five-point Likert scale. The Mann Whitney non-parametric test was used to evaluate students’ activities during the edu­cation process. The ­e-learning course had a direct influence on learning experiences, dental information, opinions and comments. Our results verified that satisfaction is an important and influential factor in determining whether a student decides to choose a dentistry and maxillofacial surgery course. Students prefer to have more time for practical therapy in the clinic. It was demonstrated that examination results did not correspond to the type of

  17. Preparedness of Entering Pediatric Dentistry Residents: Advanced Pediatric Program Directors' and First-Year Residents' Perspectives.

    Science.gov (United States)

    Rutkauskas, John; Seale, N Sue; Casamassimo, Paul; Rutkauskas, John S

    2015-11-01

    For children to receive needed oral health care, adequate training at both the predoctoral and postdoctoral levels of dental education is required, but previous studies have found inadequacies in predoctoral education that lead to general dentists' unwillingness to treat certain young populations. As another way of assessing predoctoral preparation, the aim of this study was to determine the perspectives of first-year residents and pediatric program directors about residents' preparedness to enter advanced education programs in pediatric dentistry. Surveys were sent to all 74 U.S. program directors and 360 first-year residents. The survey focused on procedures related to prevention, behavior management, restorative procedures, pulp therapy, sedation, and surgery, as well as treating patients funded by Medicaid and with special health care needs. Among the first-year residents, 173 surveys were returned for a 48% response rate; 61 directors returned surveys for an 82% response rate. Only half of the residents (55%) reported feeling adequately prepared for their first year in residency; less than half cited adequate preparation to place stainless steel crowns (SSCs) (42%) and perform pulpotomies (45%). Far fewer felt adequately prepared to provide treatment for children six months to three years of age, including examinations (29%), infant oral exams (27%), and children with severe caries (37%). The program directors were even less positive about the adequacy of residents' preparation. Only 17% deemed them adequately prepared to place SSCs and 13% to perform pulpotomies. Approximately half reported their first-year residents were inadequately prepared to treat very young children and children with severe caries (55% each). This study found that the perceived inadequacy of predoctoral education in pediatric dentistry was consistent at both the learner and educator levels, supporting previous studies identifying inadequacies in this area.

  18. Clean Coal Technology Demonstration Program: Program Update 1998

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    1999-03-01

    Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  19. Clean Coal Technology Demonstration Program: Program Update 2001

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2002-07-30

    Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results. Also includes Power Plant Improvement Initiative Projects.

  20. Self-regulated learning using multimedia programs in Dentistry posgraduate students. A multimethod approach

    Directory of Open Access Journals (Sweden)

    Miguel Rivas LLORET

    2009-10-01

    Full Text Available The purpose of this study was to study the effect of a multimedia computing program on the production of activities and self-regulated learning processes in 18 students of the Dentistry postdegree (Celaya, Mexico. A multi-method design (quasi-experimental, pretest-post-test and qualitative: Think aloud protocol was used. Self-regulated activities were identified with the MSLQ questionnaire. Results of the MSLQ pretest/post-test questionnaire didn't show an intervention effect. In contrast, the qualitative methodology allowed the registration of a high frequency of self-regulated dimensions on the metacognitive area, on the making of inferences (cognitive area, and on the planning time and effort (behavioural area. Our data revealed the usefulness of a qualitative methodology for the understanding of the complex nature of the self-regulatory processes on learning environments based on computers.

  1. OVERVIEW OF USEPA'S ARSENIC TECHNOLOGY DEMONSTRATION PROGRAM

    Science.gov (United States)

    This presentation provides a summary on the Arsenic Treatment Technology Demonstration Program. The information includes the history and the current status of the demonstration projects on both round 1 and round 2 including some photos of the treatment systems. The presentation m...

  2. Cosmetic Dentistry

    Science.gov (United States)

    If you have stained, broken or uneven teeth, cosmetic dentistry can help. Cosmetic dentistry is different from orthodontic treatment, which can straighten your teeth with braces or other devices. Cosmetic dental procedures include Bleaching to make teeth whiter ...

  3. Hanford radiochemical site decommissioning demonstration program

    International Nuclear Information System (INIS)

    Nelson, D.C.

    1971-01-01

    A program is proposed for the innovation, development, and demonstration of technologies necessary to decommission the Hanford radiochemical plant area to the extent that the sites can have unrestricted public access. The five tasks selected for development and demonstration of restoration techniques were restoration of a burial ground, decommissioning of a separations plant, restoration of a separations plant waste interim storage tank farm, restoration of a liquid disposal area, and disposal of large contaminated equipment. Process development requirements are tabulated and discussed. A proposed schedule and estimated costs are given

  4. NASA Technology Demonstrations Missions Program Overview

    Science.gov (United States)

    Turner, Susan

    2011-01-01

    The National Aeronautics and Space Administration (NASA) Fiscal Year 2010 (FY10) budget introduced a new strategic plan that placed renewed emphasis on advanced missions beyond Earth orbit. This supports NASA s 2011 strategic goal to create innovative new space technologies for our exploration, science, and economic future. As a result of this focus on undertaking many and more complex missions, NASA placed its attention on a greater investment in technology development, and this shift resulted in the establishment of the Technology Demonstrations Missions (TDM) Program. The TDM Program, within the newly formed NASA Office of the Chief Technologist, supports NASA s grand challenges by providing a steady cadence of advanced space technology demonstrations (Figure 1), allowing the infusion of flexible path capabilities for future exploration. The TDM Program's goal is to mature crosscutting capabilities to flight readiness in support of multiple future space missions, including flight test projects where demonstration is needed before the capability can transition to direct mission The TDM Program has several unique criteria that set it apart from other NASA program offices. For instance, the TDM Office matures a small number of technologies that are of benefit to multiple customers to flight technology readiness level (TRL) 6 through relevant environment testing on a 3-year development schedule. These technologies must be crosscutting, which is defined as technology with potential to benefit multiple mission directorates, other government agencies, or the aerospace industry, and they must capture significant public interest and awareness. These projects will rely heavily on industry partner collaboration, and funding is capped for all elements of the flight test demonstration including planning, hardware development, software development, launch costs, ground operations, and post-test assessments. In order to inspire collaboration across government and industry

  5. Teaching atraumatic restorative treatment in U.S. dental schools: a survey of predoctoral pediatric dentistry program directors.

    Science.gov (United States)

    Kateeb, Elham T; Warren, John J; Damiano, Peter; Momany, Elizabeth; Kanellis, Michael; Weber-Gasparoni, Karin; Ansley, Tim

    2013-10-01

    The International Dental Federation and World Health Organization have promoted the use of Atraumatic Restorative Treatment (ART) in modern clinical settings worldwide. In the United States, the practice of ART is not believed to be widely used, which may be a result of little attention given to ART training in predoctoral pediatric dentistry curricula in U.S. dental schools. This study investigated the extent of clinical and didactic instruction on ART provided in U.S. dental schools by surveying the predoctoral pediatric dentistry programs in 2010. Of the fifty-seven directors asked to complete the survey, forty-four responded for a response rate of 77 percent. Of these forty-four programs, 66 percent reported providing clinical training on ART, though only 14 percent provide this training often or very often. The types of ART training provided often or very often included interim treatment (18 percent) and single-surface cavities (14 percent) in primary teeth. However, ART was said to be rarely taught as a definitive treatment in permanent teeth (2 percent). Attitude was a major predictor, for clinical training provided and using professional guidelines in treatment decisions were associated with a positive attitude towards ART. These predoctoral pediatric dentistry programs used ART mainly in primary, anterior, and single-surface cavities and as interim treatment. As ART increases access of children to dental care, the incorporation of the ART approach into the curricula of U.S. dental schools should be facilitated by professional organizations.

  6. Fuel Gas Demonstration Plant Program. Volume I. Demonstration plant

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    The objective of this project is for Babcock Contractors Inc. (BCI) to provide process designs, and gasifier retort design for a fuel gas demonstration plant for Erie Mining Company at Hoyt Lake, Minnesota. The fuel gas produced will be used to supplement natural gas and fuel oil for iron ore pellet induration. The fuel gas demonstration plant will consist of five stirred, two-stage fixed-bed gasifier retorts capable of handling caking and non-caking coals, and provisions for the installation of a sixth retort. The process and unit design has been based on operation with caking coals; however, the retorts have been designed for easy conversion to handle non-caking coals. The demonstration unit has been designed to provide for expansion to a commercial plant (described in Commercial Plant Package) in an economical manner.

  7. SCIENTIFIC BASIS OF DENTISTRY

    Directory of Open Access Journals (Sweden)

    Yegane GÜVEN

    2017-10-01

    Full Text Available Technological and scientific innovations have increased exponentially over the past years in the dentistry profession. In this article, these developments are evaluated both in terms of clinical practice and their place in the educational program. The effect of the biologic and digital revolutions on dental education and daily clinical practice are also reviewed. Biomimetics, personalized dental medicine regenerative dentistry, nanotechnology, high-end simulations providing virtual reality, genomic information, and stem cell studies will gain more importance in the coming years, moving dentistry to a different dimension.

  8. Three Mile Island zeolite vitirification demonstration program

    International Nuclear Information System (INIS)

    Siemens, D.H.; Knowlton, D.E.; Shupe, M.W.

    1981-06-01

    The cleanup of the high-activity-level water at Three Mile Island (TMI) provides an opportunity to further develop waste management technology. Approximately 790,000 gallons of high-activity-level water at TMI's Unit-2 Nuclear Power Station will be decontaminated at the site using the submerged demineralizer system (SDS). In the SDS process, the cesium and strontium in the water are sorbed onto zeolite that is contained within metal liners. The Department of Energy has asked the Pacific Northwest Laboratory (PNL) to take a portion of the zeolite from the SDS process and demonstrate, on a production scale, that this zeolite can be vitrified using the in-can melting process. This paper is a brief overview of the TMI zeolite vitrification program. The first section discusses the formulation of a glass suitable for immobilizing SDS zeolite. The following section describes a feed system that was developed to feed zeolite to the in-can melter. It also describes the in-can melting process and the government owned facilities in which the demonstrations will take place. Finally, the schedule for completing the program activities is outlined

  9. Ergonomics in Dentistry

    OpenAIRE

    Dargahi H; Saraji J; Sadr J; Sadri G

    2010-01-01

    Background and Aims: There are several risk factors in dentistry professional environment. Carelessness about occupational health regulation endangers dentist's life. Erconomics in dentistry is a scientific approach which introduces the latest ergonomic principles in dental profession. It discusses about physical and mental stresses. Ergonomic programs eliminate dentist physical and mental challenges and provide practical solution to establish efficient and comforting environment. Materi...

  10. Antibiotic prophylaxis for children with sickle cell disease: a survey of pediatric dentistry residency program directors and pediatric hematologists.

    Science.gov (United States)

    Tate, Anupama Rao; Norris, Chelita Kaye; Minniti, Caterina P

    2006-01-01

    The purposes of this study were to: (1) investigate the current clinical practice regarding the use of antibiotic prophylaxis by pediatric dentistry residency program directors and pediatric hematologists for children with sickle cell disease (SCD) requiring dental treatment; and (2) evaluate the perceived relative risk of bacteremia following specific dental procedures, as defined by pediatric dentistry residency program directors and pediatric hematologists. A written survey depicting various clinical scenarios of SCD children requiring common dental procedures was mailed to directors of pediatric dental advanced education programs and distributed to pediatric hematologists attending the 2003 Annual Sickle Cell Disease Association of America conference in Washington, DC. Surveys were returned by 60% (N=34/57) of the pediatric dentistry residency program directors. The surveys were obtained from 51% of pediatric hematologists at the meeting (N=72/140). At least 50% of all respondents recommended prophylaxis for the following clinical situations: dental extractions, treatment under general anesthesia, and status post splenectomy. The perceived risk of infectious complication was highest for extractions, followed by restorative treatment and tooth polishing. Dental residency program directors were more likely (71%, N=24/34) to recommend additional antibiotic therapy for patients taking penicillin prophylaxis if they required an invasive oral surgical procedure. Conversely, only 38% (N=25/66) of pediatric hematologists recommended additional antibiotic therapy (P=.001). Eighty-six percent of dental residency program directors (N=25/29) chose amoxicillin for prophylaxis whereas only 62% of pediatric hematologists (N=36/58) recommended amoxicillin. (Pchildren undergoing dental treatments. Further research and risk/benefit assessment is needed to create a unified approach.

  11. Biomimetic dentistry

    Directory of Open Access Journals (Sweden)

    Suchetana Goswami

    2018-01-01

    Full Text Available “Biomimetics” is the field of science that uses the natural system of synthesizing materials through biomimicry. This method can be widely used in dentistry for regeneration of dental structures and replacement of lost dental tissues. This is a review paper that states its scope, history, different fields of biomimetic dentistry, and its future conditions in India.

  12. Biomimetic dentistry

    OpenAIRE

    Suchetana Goswami

    2018-01-01

    “Biomimetics” is the field of science that uses the natural system of synthesizing materials through biomimicry. This method can be widely used in dentistry for regeneration of dental structures and replacement of lost dental tissues. This is a review paper that states its scope, history, different fields of biomimetic dentistry, and its future conditions in India.

  13. The Pew National Dental Education Program at the University of Florida College of Dentistry.

    Science.gov (United States)

    McNeal, Donbald R.; And Others

    1990-01-01

    Strategic planning at the University of Florida College of Dentistry identified: the needs of the elderly population; the remote location of the dental school relative to the population in the state; the need to expand clinical research; the need to utilize computers; the reliance on state funding; etc. (MLW)

  14. Near-Net Forging Technology Demonstration Program

    Science.gov (United States)

    Hall, I. Keith

    1996-01-01

    Significant advantages in specific mechanical properties, when compared to conventional aluminum (Al) alloys, make aluminum-lithium (Al-Li) alloys attractive candidate materials for use in cryogenic propellant tanks and dry bay structures. However, the cost of Al-Li alloys is typically five times that of 2219 aluminum. If conventional fabrication processes are employed to fabricate launch vehicle structure, the material costs will restrict their utilization. In order to fully exploit the potential cost and performance benefits of Al-Li alloys, it is necessary that near-net manufacturing methods be developed to off-set or reduce raw material costs. Near-net forging is an advanced manufacturing method that uses elevated temperature metal movement (forging) to fabricate a single piece, near-net shape, structure. This process is termed 'near-net' because only a minimal amount of post-forge machining is required. The near-net forging process was developed to reduce the material scrap rate (buy-to-fly ratio) and fabrication costs associated with conventional manufacturing methods. The goal for the near-net forging process, when mature, is to achieve an overall cost reduction of approximately 50 percent compared with conventional manufacturing options for producing structures fabricated from Al-Li alloys. This NASA Marshall Space Flight Center (MSFC) sponsored program has been a part of a unique government / industry partnership, coordinated to develop and demonstrate near-net forging technology. The objective of this program was to demonstrate scale-up of the near-net forging process. This objective was successfully achieved by fabricating four integrally stiffened, 170- inch diameter by 20-inch tall, Al-Li alloy 2195, Y-ring adapters. Initially, two 2195 Al-Li ingots were converted and back extruded to produce four cylindrical blockers. Conventional ring rolling of the blockers was performed to produce ring preforms, which were then contour ring rolled to produce

  15. Clean Coal Technology Demonstration Program: Program update 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The Clean Coal Technology Demonstration Program (also referred to as the CCT Program) is a $6.9 billion cost-shared industry/government technology development effort. The program is to demonstrate a new generation of advanced coal-based technologies, with the most promising technologies being moved into the domestic and international marketplace. Technology has a vital role in ensuring that coal can continue to serve U.S. energy interests and enhance opportunities for economic growth and employment while meeting the national committment to a clean and healthy global environment. These technologies are being advanced through the CCT Program. The CCT Program supports three substantive national objectives: ensuring a sustainable environment through technology; enhancing energy efficiency and reliability; providing opportunities for economic growth and employment. The technologies being demonstrated under the CCT Program reduce the emissions of sulfur oxides, nitrogen oxides, greenhouse gases, hazardous air pollutants, solid and liquid wastes, and other emissions resulting from coal use or conversion to other fuel forms. These emissions reductions are achieved with efficiencies greater than or equal to currently available technologies.

  16. Clean Coal Technology Demonstration Program. Program update 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The Clean Coal Technology Demonstration Program (CCT Program) is a $7.14 billion cost-shared industry/government technology development effort. The program is to demonstrate a new generation of advanced coal-based technologies, with the most promising technologies being moved into the domestic and international marketplace. Clean coal technologies being demonstrated under the CCT program are creating the technology base that allows the nation to meet its energy and environmental goals efficiently and reliably. The fact that most of the demonstrations are being conducted at commercial scale, in actual user environments, and under conditions typical of commercial operations allows the potential of the technologies to be evaluated in their intended commercial applications. The technologies are categorized into four market sectors: advanced electric power generation systems; environmental control devices; coal processing equipment for clean fuels; and industrial technologies. Sections of this report describe the following: Role of the Program; Program implementation; Funding and costs; The road to commercial realization; Results from completed projects; Results and accomplishments from ongoing projects; and Project fact sheets. Projects include fluidized-bed combustion, integrated gasification combined-cycle power plants, advanced combustion and heat engines, nitrogen oxide control technologies, sulfur dioxide control technologies, combined SO{sub 2} and NO{sub x} technologies, coal preparation techniques, mild gasification, and indirect liquefaction. Industrial applications include injection systems for blast furnaces, coke oven gas cleaning systems, power generation from coal/ore reduction, a cyclone combustor with S, N, and ash control, cement kiln flue gas scrubber, and pulse combustion for steam coal gasification.

  17. Nano dentistry

    International Nuclear Information System (INIS)

    Oh, S.; Park, Y.B.; Kim, S.; Jin, S.

    2014-01-01

    Nano technology in dentistry has drawn many scientists’ and clinicians’ attention to significant advances in the diagnosis, treatment, and prevention of oral disease. Also, nano materials in dentistry have been studied to overcome the physical and chemical characteristics of conventional dental materials. These interesting facts are the motivation of this special issue. The presented issue provides a variety of topics in the field of dentistry such as novel nano filled composite resin, the cytotoxicity of nanoparticles deposited on orthodontic bands, the osseointegration of 3D nano scaffold, and nano surface treated implant.

  18. Executive summary of the Cryofracture demonstration program

    International Nuclear Information System (INIS)

    Loomis, G.; Osborne, D.; Ancho, M.

    1991-09-01

    This report provides an executive summary of the Cryofracture demonstration program performed at Nuclear Remedial Technologies Corporation under contract to EG ampersand G Idaho, Inc., for the Department of Energy (DOE). Cryofracture is a size-reducing process whereby objects are frozen whereby objects are frozen to liquid nitrogen temperatures and crushed in a large hydraulic press. Material at the cryogenic temperatures have low ductility and are easily size reduced by fracturing. The main application being investigated for the DOE is for retrieved buried and stored transuranic (TRU) waste. Six 55-gallon drums and six 2 ft x 2 ft x 8 ft boxes containing simulated waste with tracers were subjected to the Cryofracture process. Data was obtained on (a) cool-down time, (b) yield strength of the containers, (c) size distribution of the waste before and after the Cryofracture process, (d) volume reduction of the waste, and (e) sampling of air and surface dusts for spread of tracers to evaluate potential contamination spread. The Cryofracture process was compared to conventional shredders and detailed cost estimates were established for construction of a Cryofracture facility at the Idaho National Engineering Laboratory. Although cost estimates for conventional shredding are higher for Cryofracture, the potential for fire and explosion during conventional shredding would incur additional costs to preclude these events. These additional costs are unknown and would require considerable research and development. 4 refs., 6 figs., 7 tabs

  19. Implant dentistry curriculum in undergraduate education: part 2-program at the Albert-Ludwigs University, Freiburg, Germany.

    Science.gov (United States)

    Kroeplin, Birgit S; Strub, Joerg R

    2011-01-01

    The aim of this study was to describe the didactic and clinical undergraduate implant dentistry program of the Albert-Ludwigs University, Freiburg, Germany, with emphasis on the clinical implant experience. A detailed description of the implant curriculum at Albert-Ludwigs University is given with documented exemplary cases and additional flow charts. All students participate in 28 hours of lectures and approximately 64 hours of seminars with hands-on courses and gain clinical experience. All undergraduate students are eligible to place and restore oral implants. Emphasis is placed on prosthetic-driven planning of implant positions, three-dimensional imaging, and computer-guided implant placement. Implant restorations performed by undergraduate students comprise single crowns and small multiunit fixed dental prostheses in partially edentulous posterior maxillae and anterior or posterior mandibles, implant-retained overdentures (snap attachment) in edentulous patients, and telescopic fixed-removable dental prostheses on remaining teeth and strategically placed additional implants. Over the past 2.5 years, 51 patients were treated with 97 dental implants placed by students in the undergraduate program. Seventy-one restorations were inserted: 60.6% single crowns, 7% fixed dental protheses, 21.1% overdentures, and 11.3% telescopic fixed-removable dental prostheses. The implant survival rate was 98.9%. Because survival rates for dental implants placed and restored by students are comparable to those of experienced dentists, oral implant dentistry should be implemented as part of the undergraduate dental curriculum.

  20. Clean coal technology demonstration program: Program update 1996-97

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    The Clean Coal Technology Demonstration Program (known as the CCT Program) reached a significant milestone in 1996 with the completion of 20 of the 39 active projects. The CCT Program is responding to a need to demonstrate and deploy a portfolio of technologies that will assure the U.S. recoverable coal reserves of 297 billion tons could continue to supply the nation`s energy needs economically and in a manner that meets the nation`s environmental objectives. This portfolio of technologies includes environmental control devices that contributed to meeting the accords on transboundary air pollution recommended by the Special Envoys on Acid Rain in 1986. Operational, technical, environmental, and economic performance information and data are now flowing from highly efficient, low-emission, advanced power generation technologies that will enable coal to retain its prominent role into the next millennium. Further, advanced technologies are emerging that will enhance the competitive use of coal in the industrial sector, such as in steelmaking. Coal processing technologies will enable the entire coal resource base to be used while complying with environmental requirements. These technologies are producing products used by utilities and industrial processes. The capability to coproduce products, such as liquid and solid fuels, electricity, and chemicals, is being demonstrated at a commercial scale by projects in the CCT Program. In summary, this portfolio of technologies is satisfying the national need to maintain a multifuel energy mix in which coal is a key component because of its low-cost, availability, and abundant supply within the nation`s borders.

  1. DYMAC demonstration program: Phase I experience

    International Nuclear Information System (INIS)

    Augustson, R.H.

    1978-02-01

    The DYnamic MAterials Control (DYMAC) project tested a prototype system at the DP Site LASL plutonium facility, which consisted of a computerized accounting system based on material balancing by unit process. Transactions were written to describe the movement of material from one unit process to another. In the DYMAC prototype a specially designed computer program handled transactions that operators entered into the system via a terminal in the processing area. The transactions contained the same information that is used in the present LASL paper accounting system to create an inventory. During a 6-week period the DYMAC system operated in parallel with the paper system. At the end of the period results showed the DYMAC system was able to keep an accurate and timely inventory. Concurrent with testing the transaction-handling program, the project operated several nondestructive assay instruments in a glovebox environment, specifically the electronic balance, solution assay instrument, and thermal-neutron coincidence counter. From the instrument operation logs, project personnel were able to identify operational problems and incorporate design changes in the instrumentation for the new facility

  2. Report on Health Manpower and Programs in Ohio: Part Two. Allied Health, Area Health Education Centers, Dentistry, Emergency Medical Services, Nursing, Optometry, Pharmacy, Podiatry, and Veterinary Medicine.

    Science.gov (United States)

    Ohio Board of Regents, Columbus.

    Information on health occupations educational programs in Ohio and current and projected employment needs for health professionals are presented. The following health fields are examined: allied health, dentistry, emergency medical service, nursing, optometry, pharmacy, podiatry, and veterinary medicine. Issues and trends affecting each field are…

  3. Transit Marketing : A Program of Research, Demonstration and Communication

    Science.gov (United States)

    1985-04-01

    This report recommends a five-year program of research, demonstration, and communication to improve the effectiveness of marketing practice in the U.S. transit industry. The program is oriented toward the development of improved market research tools...

  4. Mining processes in dentistry

    NARCIS (Netherlands)

    Mans, R.S.; Reijers, H.A.; van Genuchten, M.; Wismeijer, D.

    2012-01-01

    Business processes in dentistry are quickly evolving towards "digital dentistry". This means that many steps in the dental process will increasingly deal with computerized information or computerized half products. A complicating factor in the improvement of process performance in dentistry,

  5. Spatial Programming for Industrial Robots Through Task Demonstration

    OpenAIRE

    Jens Lambrecht; Martin Kleinsorge; Martin Rosenstrauch; Jörg Krüger

    2013-01-01

    Abstract We present an intuitive system for the programming of industrial robots using markerless gesture recognition and mobile augmented reality in terms of programming by demonstration. The approach covers gesture-based task definition and adaption by human demonstration, as well as task evaluation through augmented reality. A 3D motion tracking system and a handheld device establish the basis for the presented spatial programming system. In this publication, we present a prototype toward ...

  6. Alternative-fueled truck demonstration natural gas program: Caterpillar G3406LE development and demonstration

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    In 1990, the California Energy Commission, the South Coast Air Quality Management District, and the Southern California Gas Company joined together to sponsor the development and demonstration of compressed natural gas engines for Class 8 heavy-duty line-haul trucking applications. This program became part of an overall Alternative-Fueled Truck Demonstration Program, with the goal of advancing the technological development of alternative-fueled engines. The demonstration showed natural gas to be a technically viable fuel for Class 8 truck engines.

  7. MAVL wastes containers functional demonstration and associated tests program

    International Nuclear Information System (INIS)

    Templier, J.C.

    2002-01-01

    In the framework of studies on the MAVL wastes, the CEA develops containers for middle time wastes storage. This program aims to realize a ''B wastes containers'' demonstrator. A demonstrator is a container, parts of a container or samples which must validate the tests. This document presents the state of the study in the following three chapters: functions description, base data and design choices; presentation of the functional demonstrators; demonstration tests description. (A.L.B.)

  8. Opportunity Knocks: Pipeline Programs Offer Minority Students a Path to Dentistry

    Science.gov (United States)

    Fauteux, Nicole

    2012-01-01

    Minority students have traditionally been underrepresented in dental schools, which is why enrichment and pipeline programs aimed at helping minority students are necessary. That reality is reflected in their woeful underrepresentation among practicing dentists. Hispanics made up only 5.8 percent of practicing dentists in 2011, according to the…

  9. Western hardwoods : value-added research and demonstration program

    Science.gov (United States)

    D. W. Green; W. W. Von Segen; S. A. Willits

    1995-01-01

    Research results from the value-added research and demonstration program for western hardwoods are summarized in this report. The intent of the program was to enhance the economy of the Pacific Northwest by helping local communities and forest industries produce wood products more efficiently. Emphasis was given to value-added products and barriers to increased...

  10. Clean coal technologies: Research, development, and demonstration program plan

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-01

    The US Department of Energy, Office of Fossil Energy, has structured an integrated program for research, development, and demonstration of clean coal technologies that will enable the nation to use its plentiful domestic coal resources while meeting environmental quality requirements. The program provides the basis for making coal a low-cost, environmentally sound energy choice for electric power generation and fuels production. These programs are briefly described.

  11. Green dentistry: The future

    Directory of Open Access Journals (Sweden)

    Mensudar Rathakrishnan

    2017-01-01

    Full Text Available Dentistry is a profession dedicated to promote health and wellness of the people. Green dentistry is a relatively new emerging concept in dentistry. Most dental offices are privately-owned small businesses and have no financial advantage to invest in many environmental-friendly practices. For this reason, more research is needed to find cost-effective environmental alternatives in dentistry. The aim of this article is to expand awareness and practice of eco-friendly dentistry.

  12. Hybrid Propulsion Demonstration Program 250K Hybrid Motor

    Science.gov (United States)

    Story, George; Zoladz, Tom; Arves, Joe; Kearney, Darren; Abel, Terry; Park, O.

    2003-01-01

    The Hybrid Propulsion Demonstration Program (HPDP) program was formed to mature hybrid propulsion technology to a readiness level sufficient to enable commercialization for various space launch applications. The goal of the HPDP was to develop and test a 250,000 pound vacuum thrust hybrid booster in order to demonstrate hybrid propulsion technology and enable manufacturing of large hybrid boosters for current and future space launch vehicles. The HPDP has successfully conducted four tests of the 250,000 pound thrust hybrid rocket motor at NASA's Stennis Space Center. This paper documents the test series.

  13. Zeolite Vitrification Demonstration Program nonradioactive-process operations summary

    International Nuclear Information System (INIS)

    Bryan, G.H.; Knox, C.A.; Goles, R.G.; Ethridge, L.J.; Siemens, D.H.

    1982-09-01

    The Submerged Demineralizer System is a process developed to decontaminate high-activity level water at Three Mile Island by sorbing the activity (primarily Cs and Sr) onto beds of zeolite. Pacific Northwest Laboratory's Zeolite Vitrification Demonstration Program has the responsibility of demonstrating the full-scale vitrification of this zeolite material. The first phase of this program has been to develop a glass formulation and demonstrate the vitrification process with the use of nonradioactive materials. During this phase, four full-scale nonradioactive demonstration runs were completed. The same zeolite mixture being used in the SDS system was loaded with nonradioactive isotopes of Cs and Sr, dried, blended with glass-forming chemicals and fed to a canister in an in-can melter furnace. During each run, the gaseous effluents were sampled. After each run, glass samples were removed and analyzed

  14. Fuel cycle and waste management demonstration in the IFR Program

    International Nuclear Information System (INIS)

    Lineberry, M.J.; Phipps, R.D.; Benedict, R.W.; Laidler, J.J.; Battles, J.E.; Miller, W.E.

    1992-01-01

    Argonne's National Laboratory's Integral Fast Reactor (IFR) is the main element in the US advanced reactor development program. A unique fuel cycle and waste process technology is being developed for the IFR. Demonstration of this technology at engineering scale will begin within the next year at the EBR-II test facility complex in Idaho. This paper describes the facility being readied for this demonstration, the process to be employed, the equipment being built, and the waste management approach

  15. Spatial Programming for Industrial Robots through Task Demonstration

    Directory of Open Access Journals (Sweden)

    Jens Lambrecht

    2013-05-01

    Full Text Available Abstract We present an intuitive system for the programming of industrial robots using markerless gesture recognition and mobile augmented reality in terms of programming by demonstration. The approach covers gesture-based task definition and adaption by human demonstration, as well as task evaluation through augmented reality. A 3D motion tracking system and a handheld device establish the basis for the presented spatial programming system. In this publication, we present a prototype toward the programming of an assembly sequence consisting of several pick-and-place tasks. A scene reconstruction provides pose estimation of known objects with the help of the 2D camera of the handheld. Therefore, the programmer is able to define the program through natural bare-hand manipulation of these objects with the help of direct visual feedback in the augmented reality application. The program can be adapted by gestures and transmitted subsequently to an arbitrary industrial robot controller using a unified interface. Finally, we discuss an application of the presented spatial programming approach toward robot-based welding tasks.

  16. Review of the Vortec soil remediation demonstration program

    International Nuclear Information System (INIS)

    Patten, J.S.

    1994-01-01

    The principal objective of the METC/Vortec program is to develop and demonstrate the effectiveness of the Vortec CMS in remediating soils contaminated with hazardous materials and/or low levels of radionuclides. To convincingly demonstrate the CMS's capability, a Demonstration Plant will be constructed and operated at a DOE site that has a need for the remediation of contamination soil. The following objectives will be met during the program: (1) establish the glass chemistry requirements to achieve vitrification of contaminated soils found at the selected DOE site; (2) complete the design of a fully integrated soil vitrification demonstration plant with a capacity to process 25 TPD of soil; (3) establish the cost of a fully integrated soil demonstration plant with a capacity to process 25 TPD of soil; (4) construct and operate a fully integrated demonstration plant; (5) analyze all influent and effluent streams to establish the partitioning of contaminants and to demonstrate compliance with all applicable health, safety, and environmental requirements; (6) demonstrate that the CMS technology has the capability to produce a vitrified product that will immobilize the hazardous and radionuclide materials consistent with the needs of the specific DOE waste repositories

  17. The role of a technology demonstration program for future reactors

    International Nuclear Information System (INIS)

    Viktorov, A.

    2011-01-01

    A comprehensive technology demonstration program is seen as an important component of the overall safety case, especially for a novel technology. The objective of such a program is defined as providing objective and auditable evidence that the technology will meet or exceed the relevant requirements. Various aspects of such a program are identified and then discussed in some details in this presentation. We will show how the need for such a program is anchored in fundamental safety principles. Attributes of the program, means of achieving its objective, roles of participants, as well as key steps are all elaborated. It will be argued that to prove a novel technology, the designer will have to combine several activities such as the use of operational experience, prototyping of the technology elements, conduct of experiments and tests under representative conditions, as well as modeling and analysis. Importance of availability of experimental facilities and qualified scientific and technical staff is emphasized. A solid technology demonstration program will facilitate and speed up regulatory evaluations of licensing applications. (author)

  18. The role of a technology demonstration program for future reactors

    Energy Technology Data Exchange (ETDEWEB)

    Viktorov, A. [Canadian Nuclear Safety Commission, Ottawa, Ontario (Canada)

    2011-07-01

    A comprehensive technology demonstration program is seen as an important component of the overall safety case, especially for a novel technology. The objective of such a program is defined as providing objective and auditable evidence that the technology will meet or exceed the relevant requirements. Various aspects of such a program are identified and then discussed in some details in this presentation. We will show how the need for such a program is anchored in fundamental safety principles. Attributes of the program, means of achieving its objective, roles of participants, as well as key steps are all elaborated. It will be argued that to prove a novel technology, the designer will have to combine several activities such as the use of operational experience, prototyping of the technology elements, conduct of experiments and tests under representative conditions, as well as modeling and analysis. Importance of availability of experimental facilities and qualified scientific and technical staff is emphasized. A solid technology demonstration program will facilitate and speed up regulatory evaluations of licensing applications. (author)

  19. Cosmetic Dentistry - Multiple Languages

    Science.gov (United States)

    ... Here: Home → Multiple Languages → All Health Topics → Cosmetic Dentistry URL of this page: https://medlineplus.gov/languages/ ... W XYZ List of All Topics All Cosmetic Dentistry - Multiple Languages To use the sharing features on ...

  20. Academy of General Dentistry

    Science.gov (United States)

    ... Examine Oral Systemic Health Nov 14, 2017 General Dentistry and American Family Physician Collaborate to Examine Oral ... Oral Health Oct 23, 2017 Academy of General Dentistry Foundation Celebrates 45 Years Raising Awareness for Oral ...

  1. HTTR demonstration program for nuclear cogeneration of hydrogen and electricity

    International Nuclear Information System (INIS)

    Sato, Hiroyuki; Sumita, Junya; Terada, Atsuhiko; Ohashi, Hirofumi; Yan, Xing L.; Nishihara, Tetsuo; Tachibana, Yukio; Inagaki, Yoshiyuki

    2015-01-01

    Japan Atomic Energy Agency initiated a High Temperature Engineering Test Reactor (HTTR) demonstration program in accordance with recommendations of a task force established by Ministry of Education, Culture, Sports, Science and Technology according to the Strategic Energy Plan as of April 2014. The demonstration program is designed to complete helium gas turbine and hydrogen production system technologies aiming at commercial plant deployment in 2030s. The program begins with coupling a helium gas turbine in the secondary loop of the HTTR and expands by adding the H 2 plant to a tertiary loop to enable hydrogen cogeneration. Safety standards for coupling the helium gas turbine and H 2 plant to the nuclear reactor will be established through safety review in licensing. A system design and its control method are planned to be validated with a series of test operations using the HTTR-GT/H 2 plant. This paper explains the outline of HTTR demonstration program with a plant concept of the heat application system directed at establishing an HTGR cogeneration system with 950°C reactor outlet temperature for production of power and hydrogen as recommended by the task force. Commercial deployment strategy including a development plan for the helium gas turbine is also presented. (author)

  2. Laser in operative dentistry

    OpenAIRE

    E. Yasini; Gh. Rahbari; A. Matorian

    1994-01-01

    Today laser has a lot of usage in medicine and dentistry. In the field of dentistry, laser is used in soft tissue surgery, sterilization of canals (in root canal therapy) and in restorative dentistry laser is used for cavity preparation, caries removal, sealing the grooves (in preventive dentistry), etching enamel and dentin, composite polymerization and removal of tooth sensitivity. The use of Co2 lasers and Nd: YAG for cavity preparation, due to creating high heat causes darkness and cracks...

  3. A feasibility demonstration program for superconducting magnetic energy storage

    International Nuclear Information System (INIS)

    Filios, P.G.

    1988-01-01

    The Defense Nuclear Agency, as the agent of the Strategic Defense Initiative (SDI) Office, has begun a program to build an engineering test model (ETM) of a superconducting magnetic energy storage (SMES) system. The ETM will serve to demonstrate the feasibility of using SMES technology to meet both SDI and public utility requirements for electric energy storage. SMES technology characteristics are reviewed and related to SDI and electric utility requirements. Program structure and schedule are related to specific objectives, and critical issues are defined

  4. Early Site Permit Demonstration Program: Plant parameters envelope report

    International Nuclear Information System (INIS)

    1993-03-01

    The Early Site Permit (ESP) Demonstration Program is the nuclear industry's initiative for piloting the early resolution of siting-related issues before the detailed design proceedings of the combined operating license review. The ESP Demonstration Program consists of three phases. The plant parameters envelopes task is part of Phase 1, which addresses the generic review of applicable federal regulations and develops criteria for safety and environmental assessment of potential sites. The plant parameters envelopes identify parameters that characterize the interface between an ALWR design and a potential site, and quantify the interface through values selected from the Utility Requirements Documents, vendor design information, or engineering assessments. When augmented with site-specific information, the plant parameters envelopes provide sufficient information to allow ESPs to be granted based on individual ALWR design information or enveloping design information for the evolutionary, passive, or generic ALWR plants. This document is expected to become a living document when used by future applicants

  5. An inspection demonstration program/a quality system

    International Nuclear Information System (INIS)

    Cox, L.D.

    1995-01-01

    Mobil relies on tubular manufacturers to consistently supply OCTG which complies with all material requirements of API Specification 5CT. This paper details the Mobil Inspection Demonstration Program; Mobil's method for qualifying ultrasonic inspection systems for use during Mobil receiving inspections. Additionally, the basic fundamentals of the Mobil quality system and acceptance sampling are presented with an emphasis on tracking short-term and long-term supplier performance

  6. Commercial Cyclone Incinerator Demonstration Program: April-September 1979

    International Nuclear Information System (INIS)

    Alexander, B.M.

    1979-01-01

    The commercial cyclone incinerator program was designed to study the effects of burning low-level waste contaminated with beta and gamma emitters in a cyclone system. The ultimate program goal is the demonstration of a cyclone incinerator at a nuclear power plant. During the past six months, the first program objective, NRC review of the Feasibility Plan, was achieved, and work began on the second objective, Complete Incinerator Feasibility Plan. Potential applications for the cyclone incinerator have been investigated. The feasibility plan for the incinerator system was reviewed with the Nuclear Regulatory Commission (NRC). Following a series of cold checkout burns, implementation of the feasibility plan was begun with the start of laboratory-scale experiments. Inconel 601 is being investigated as a material of construction for the incinerator burn chamber

  7. 1994 Fernald field characterization demonstration program data report

    International Nuclear Information System (INIS)

    Rautman, C.A.; Cromer, M.V.; Newman, G.C.; Beiso, D.A.

    1995-12-01

    The 1994 Fernald field characterization demonstration program, hosted by Fernald Environmental Management Project, was established to investigate technologies that are applicable to the characterization and remediation of soils contaminated with uranium. An important part of this effort was evaluating field-screening tools potentially capable of acquiring high-resolution information on uranium contamination distribution in surface soils. Further-more, the information needed to be obtained in a cost- and time-efficient manner. Seven advanced field-screening technologies were demonstrated at a uranium-contaminated site at Fernald, located 29 kilometers northwest of Cincinnati, Ohio. The seven technologies tested were: (1) alpha-track detectors, (2) a high-energy beta scintillometer, (3) electret ionization chambers, (4) and (5) two variants of gamma-ray spectrometry, (6) laser ablation-inductively coupled plasma-atomic emission spectroscopy, and (7) long-range alpha detection. The goals of this field demonstration were to evaluate the capabilities of the detectors and to demonstrate their utility within the US Department of Energy's Environmental Restoration Program. Identical field studies were conducted using four industry-standard characterization tools: (1) a sodium-iodide scintillometer, (2) a low-energy FIDLER scintillometer, (3) a field-portable x-ray fluorescence detector, and (4) standard soil sampling coupled with laboratory analysis. Another important aspect of this program was the application of a cost/risk decision model to guide characterization of the site. This document is a compilation of raw data submitted by the technologies and converted total uranium data from the 1994 Fernald field characterization demonstration

  8. 76 FR 60050 - Medicaid Program: Money Follows the Person Rebalancing Demonstration Program

    Science.gov (United States)

    2011-09-28

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Medicare & Medicaid Services Medicaid Program: Money Follows the Person Rebalancing Demonstration Program AGENCY: Centers for Medicare & Medicaid... Medicaid beneficiaries with disabling and chronic conditions from institutions into the community. The...

  9. Performance demonstration program plan for analysis of simulated headspace gases

    International Nuclear Information System (INIS)

    1995-06-01

    The Performance Demonstration Program (PDP) for analysis of headspace gases will consist of regular distribution and analyses of test standards to evaluate the capability for analyzing VOCs, hydrogen, and methane in the headspace of transuranic (TRU) waste throughout the Department of Energy (DOE) complex. Each distribution is termed a PDP cycle. These evaluation cycles will provide an objective measure of the reliability of measurements performed for TRU waste characterization. Laboratory performance will be demonstrated by the successful analysis of blind audit samples of simulated TRU waste drum headspace gases according to the criteria set within the text of this Program Plan. Blind audit samples (hereinafter referred to as PDP samples) will be used as an independent means to assess laboratory performance regarding compliance with the QAPP QAOs. The concentration of analytes in the PDP samples will encompass the range of concentrations anticipated in actual waste characterization gas samples. Analyses which are required by the WIPP to demonstrate compliance with various regulatory requirements and which are included in the PDP must be performed by laboratories which have demonstrated acceptable performance in the PDP

  10. Pecan Street Grid Demonstration Program. Final technology performance report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-02-10

    This document represents the final Regional Demonstration Project Technical Performance Report (TPR) for Pecan Street Inc.’s (Pecan Street) Smart Grid Demonstration Program, DE-OE-0000219. Pecan Street is a 501(c)(3) smart grid/clean energy research and development organization headquartered at The University of Texas at Austin (UT). Pecan Street worked in collaboration with Austin Energy, UT, Environmental Defense Fund (EDF), the City of Austin, the Austin Chamber of Commerce and selected consultants, contractors, and vendors to take a more detailed look at the energy load of residential and small commercial properties while the power industry is undergoing modernization. The Pecan Street Smart Grid Demonstration Program signed-up over 1,000 participants who are sharing their home or businesses’s electricity consumption data with the project via green button protocols, smart meters, and/or a home energy monitoring system (HEMS). Pecan Street completed the installation of HEMS in 750 homes and 25 commercial properties. The program provided incentives to increase the installed base of roof-top solar photovoltaic (PV) systems, plug-in electric vehicles with Level 2 charging, and smart appliances. Over 200 participants within a one square mile area took advantage of Austin Energy and Pecan Street’s joint PV incentive program and installed roof-top PV as part of this project. Of these homes, 69 purchased or leased an electric vehicle through Pecan Street’s PV rebate program and received a Level 2 charger from Pecan Street. Pecan Street studied the impacts of these technologies along with a variety of consumer behavior interventions, including pricing models, real-time feedback on energy use, incentive programs, and messaging, as well as the corresponding impacts on Austin Energy’s distribution assets.The primary demonstration site was the Mueller community in Austin, Texas. The Mueller development, located less than three miles from the Texas State Capitol

  11. Ergonomics in Dentistry

    Directory of Open Access Journals (Sweden)

    Dargahi H

    2010-01-01

    Full Text Available Background and Aims: There are several risk factors in dentistry professional environment. Carelessness about occupational health regulation endangers dentist's life. Erconomics in dentistry is a scientific approach which introduces the latest ergonomic principles in dental profession. It discusses about physical and mental stresses. Ergonomic programs eliminate dentist physical and mental challenges and provide practical solution to establish efficient and comforting environment. Materials and Methods: This study reviewed the role and effectiveness of Ergonomics in dental profession. We used related journals, books and ergonomics websites to write this article. Conclusion: Many of researchers believe that awkward body posture and low movement are the sources of occupational disorders. Therefore, knowledge of ergonomics risk factors in dental office design is very important. Dentist's body posture and dental equipment evaluations are important factors in dental ergonomics. The most logical approach to design dental equipment for utilizing ergonomics principles is consideration of the dentist posture and type of movements and activities. In conclusion, dentists should be informed about dental ergonomics regulation and its different aspects. Furthermore, academic developments and research projects can be useful in this area.

  12. License renewal demonstration program: NRC observations and lessons learned

    International Nuclear Information System (INIS)

    Prato, R.J.; Kuo, P.T.; Newberry, S.F.

    1996-12-01

    This report summarizes the Nuclear Regulatory Commission staff's observations and lessons learned from the five License Renewal Demonstration Program (LRDP) site visits performed by the staff from March 25, 1996, through August 16, 1996. The LRDP was a Nuclear Energy Institute (NEI) program intended to assess the effectiveness of the guidance provided by NEI 95-10, Revision 0, open-quotes Industry Guideline for Implementing the Requirements of 10 CFR Part 54 - The License Renewal Rule,close quotes to implement the requirements of Title 10 of the Code of Federal Regulations, Part 54 (10 CFR Part 54), open-quotes Requirements for Renewal of Operating Licenses for Nuclear Power Plants.close quotes In general, NEI 95-10 appeared to contain the basic guidance needed for scoping, screening, identifying aging effects, developing aging management programs, and performing time-limited aging analyses. However, inconsistent implementation of this guidance in some areas was an indication that clarification of existing guidance and/or the inclusion-of some new guidance may be needed for applicants to develop a license renewal program that is consistent with the intent of the rule

  13. Performance Demonstration Program Plan for the WIPP Experimental-Waste Characterization Program

    International Nuclear Information System (INIS)

    1991-02-01

    The Performance Demonstration Program is designed to ensure that compliance with the Quality Assurance Objective, identified in the Quality Assurance Program Plan for the WIPP Experimental-Waste Characterization Program (QAPP), is achieved. This Program Plan is intended for use by the WPO to assess the laboratory support provided for the characterization of WIPP TRU waste by the storage/generator sites. Phase 0 of the Performance Demonstration Program encompasses the analysis of headspace gas samples for inorganic and organic components. The WPO will ensure the implementation of this plan by designating an independent organization to coordinate and provide technical oversight for the program (Program Coordinator). Initial program support, regarding the technical oversight and coordination functions, shall be provided by the USEPA-ORP. This plan identifies the criteria that will be used for the evaluation of laboratory performance, the responsibilities of the Program Coordinator, and the responsibilities of the participating laboratories. 5 tabs

  14. Development and demonstration program for dynamic nuclear materials control

    International Nuclear Information System (INIS)

    Augustson, R.H.; Baron, N.; Ford, R.F.; Ford, W.; Hagen, J.; Li, T.K.; Marshall, R.S.; Reams, V.S.; Severe, W.R.; Shirk, D.G.

    1978-01-01

    A significant portion of the Los Alamos Scientific Laboratory Safeguards Program is directed toward the development and demonstration of dynamic nuclear materials control. The building chosen for the demonstration system is the new Plutonium Processing Facility in Los Alamos, which houses such operations as metal-to-oxide conversion, fuel pellet fabrication, and scrap recovery. A DYnamic MAterials Control (DYMAC) system is currently being installed in the facility as an integral part of the processing operation. DYMAC is structured around interlocking unit-process accounting areas. It relies heavily on nondestructive assay measurements made in the process line to draw dynamic material balances in near real time. In conjunction with the nondestructive assay instrumentation, process operators use interactive terminals to transmit additional accounting and process information to a dedicated computer. The computer verifies and organizes the incoming data, immediately updates the inventory records, monitors material in transit using elapsed time, and alerts the Nuclear Materials Officer in the event that material balances exceed the predetermined action limits. DYMAC is part of the United States safeguards system under control of the facility operator. Because of its advanced features, the system will present a new set of inspection conditions to the IAEA, whose response is the subject of a study being sponsored by the US-IAEA Technical Assistance Program. The central issue is how the IAEA can use the increased capabilities of such a system and still maintain independent verification

  15. Methanol supply issues for alternative fuels demonstration programs

    International Nuclear Information System (INIS)

    Teague, J.M.; Koyama, K.K.

    1995-01-01

    This paper surveys issues affecting the supply of fuel-grade methanol for the California Energy Commission's alternative fuels demonstration programs and operations by other public agencies such as transit and school districts. Establishing stable and reasonably priced sources of methanol (in particular) and of alternative fuels generally is essential to their demonstration and commercialization. Development both of vehicle technologies and of fuel supply and distribution are complementary and must proceed in parallel. However, the sequence of scaling up supply and distribution is not necessarily smooth; achievement of volume thresholds in demand and through-put of alternative fuels are marked by different kinds of challenges. Four basic conditions should be met in establishing a fuel supply: (1) it must be price competitive with petroleum-based fuels, at least when accounting for environmental and performance benefits; (2) bulk supply must meet volumes required at each phase; necessitating resilience among suppliers and a means of designating priority for high value users; (3) distribution systems must be reliable, comporting with end users' operational schedules; (4) volatility in prices to the end user for the fuel must be minimal. Current and projected fuel volumes appear to be insufficient to induce necessary economies of scale in production and distribution for fuel use. Despite their benefits, existing programs will suffer absent measures to secure economical fuel supplies. One solution is to develop sources that are dedicated to fuel markets and located within the end-use region

  16. Northwest Hazardous Waste Research, Development, and Demonstration Center: Program Plan

    International Nuclear Information System (INIS)

    1988-02-01

    The Northwest Hazardous Waste Research, Development, and Demonstration Center was created as part of an ongoing federal effort to provide technologies and methods that protect human health and welfare and environment from hazardous wastes. The Center was established by the Superfund Amendments and Reauthorization Act (SARA) to develop and adapt innovative technologies and methods for assessing the impacts of and remediating inactive hazardous and radioactive mixed-waste sites. The Superfund legislation authorized $10 million for Pacific Northwest Laboratory to establish and operate the Center over a 5-year period. Under this legislation, Congress authorized $10 million each to support research, development, and demonstration (RD and D) on hazardous and radioactive mixed-waste problems in Idaho, Montana, Oregon, and Washington, including the Hanford Site. In 1987, the Center initiated its RD and D activities and prepared this Program Plan that presents the framework within which the Center will carry out its mission. Section 1.0 describes the Center, its mission, objectives, organization, and relationship to other programs. Section 2.0 describes the Center's RD and D strategy and contains the RD and D objectives, priorities, and process to be used to select specific projects. Section 3.0 contains the Center's FY 1988 operating plan and describes the specific RD and D projects to be carried out and their budgets and schedules. 9 refs., 18 figs., 5 tabs

  17. The RERTR demonstration experiments program at the Ford Nuclear Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Wehe, D K; King, J S [Department of Nuclear Engineering, University of Michigan (United States)

    1983-08-01

    The purpose of this paper is to highlight a major part of the experimental work which is being carried out at the Ford Nuclear Reactor (FNR) in conjunction with the RERTR program. A demonstration experiments program has been developed to: 1) characterize the FNR in sufficient detail to discern and quantify neutronic differences between the high and low enriched cores; 2) provide the theoretical group with measurements to benchmark their calculations. As with any experimental program associated with a reactor, stringent constraints limit the experiments which can be performed. Some experiments are performed routinely on the FNR (such as control rod calibrations), and much data is already available. Unfortunately, the accuracy we demand precludes using much of this earlier data. And in many cases, the requirement of precise (and copious) data has led to either developing new techniques (as in the case of rhodium mapping and neutron diffraction) or to further refinements on existing methods (as in the case of spectral unfolding). Nevertheless, we have tried to stay within the realm of recognized, well-established experimental methods in order to assuage any doubts about measured differences between HEU and LEU core parameters. This paper describes the principal results of the experiments performed so far.

  18. Performance Demonstration Program Plan for Analysis of Simulated Headspace Gases

    International Nuclear Information System (INIS)

    2006-01-01

    The Performance Demonstration Program (PDP) for headspace gases distributes sample gases of volatile organic compounds (VOCs) for analysis. Participating measurement facilities (i.e., fixed laboratories, mobile analysis systems, and on-line analytical systems) are located across the United States. Each sample distribution is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements performed for transuranic (TRU) waste characterization. The primary documents governing the conduct of the PDP are the Quality Assurance Program Document (QAPD) (DOE/CBFO-94-1012) and the Waste Isolation Pilot Plant (WIPP) Waste Analysis Plan (WAP) contained in the Hazardous Waste Facility Permit (NM4890139088-TSDF) issued by the New Mexico Environment Department (NMED). The WAP requires participation in the PDP; the PDP must comply with the QAPD and the WAP. This plan implements the general requirements of the QAPD and the applicable requirements of the WAP for the Headspace Gas (HSG) PDP. Participating measurement facilities analyze blind audit samples of simulated TRU waste package headspace gases according to the criteria set by this PDP Plan. Blind audit samples (hereafter referred to as PDP samples) are used as an independent means to assess each measurement facility's compliance with the WAP quality assurance objectives (QAOs). To the extent possible, the concentrations of VOC analytes in the PDP samples encompass the range of concentrations anticipated in actual TRU waste package headspace gas samples. Analyses of headspace gases are required by the WIPP to demonstrate compliance with regulatory requirements. These analyses must be performed by measurement facilities that have demonstrated acceptable performance in this PDP. These analyses are referred to as WIPP analyses and the TRU waste package headspace gas samples on which they are performed are referred to as WIPP samples in this document. Participating measurement

  19. Performance Demonstration Program Plan for Analysis of Simulated Headspace Gases

    International Nuclear Information System (INIS)

    2007-01-01

    The Performance Demonstration Program (PDP) for headspace gases distributes blind audit samples in a gas matrix for analysis of volatile organic compounds (VOCs). Participating measurement facilities (i.e., fixed laboratories, mobile analysis systems, and on-line analytical systems) are located across the United States. Each sample distribution is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements performed for transuranic (TRU) waste characterization. The primary documents governing the conduct of the PDP are the Quality Assurance Program Document (QAPD) (DOE/CBFO-94-1012) and the Waste Isolation Pilot Plant (WIPP) Waste Analysis Plan (WAP) contained in the Hazardous Waste Facility Permit (NM4890139088-TSDF) issued by the New Mexico Environment Department (NMED). The WAP requires participation in the PDP; the PDP must comply with the QAPD and the WAP. This plan implements the general requirements of the QAPD and the applicable requirements of the WAP for the Headspace Gas (HSG) PDP. Participating measurement facilities analyze blind audit samples of simulated TRU waste package headspace gases according to the criteria set by this PDP Plan. Blind audit samples (hereafter referred to as PDP samples) are used as an independent means to assess each measurement facility's compliance with the WAP quality assurance objectives (QAOs). To the extent possible, the concentrations of VOC analytes in the PDP samples encompass the range of concentrations anticipated in actual TRU waste package headspace gas samples. Analyses of headspace gases are required by the WIPP to demonstrate compliance with regulatory requirements. These analyses must be performed by measurement facilities that have demonstrated acceptable performance in this PDP. These analyses are referred to as WIPP analyses and the TRU waste package headspace gas samples on which they are performed are referred to as WIPP samples in this document

  20. Nanorobots: Future in dentistry

    Science.gov (United States)

    Shetty, Neetha J.; Swati, P.; David, K.

    2013-01-01

    The purpose of this paper is to review the phenomenon of nanotechnology as it might apply to dentistry as a new field called nanodentistry. Treatment possibilities might include the application of nanotechnology to local anesthesia, dentition renaturalization, the permanent cure for hypersensitivity, complete orthodontic realignment in a single visit, covalently bonded diamondized enamel, and continuous oral health maintenance using mechanical dentifrobots. Dental nanorobots could be constructed to destroy caries-causing bacteria or to repair tooth blemishes where decay has set in, by using a computer to direct these tiny workers in their tasks. Dental nanorobots might be programed to use specific motility mechanisms to crawl or swim through human tissue with navigational precision, to acquire energy, to sense and manipulate their surroundings, to achieve safe cytopenetration, and to use any of a multitude of techniques to monitor, interrupt, or alter nerve-impulse traffic in individual nerve cells in real time. PMID:23960556

  1. Performance in the WIPP nondestructive assay performance demonstration program

    Energy Technology Data Exchange (ETDEWEB)

    Marcinkiewicz, C.J. [Consolidated Technical Services, Inc., Frederick, MD (United States); Connolly, M.J.; Becker, G.K. [Lockheed Martin Idaho Technologies Company, Idaho Falls, ID (United States)

    1997-11-01

    Measurement facilities performing nondestructive assay (NDA) of wastes intended for disposal at the United States Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP) are required to demonstrate their ability to meet specific Quality Assurance Objectives (QAOs). This demonstration is performed, in part, by participation in the NDA Performance Demonstration Program (PDP). The PDP is funded and managed by the Carlsbad Area Office (CAO) of DOE and is conducted by the Idaho National Engineering Laboratory. It tests the characteristics of precision, system bias and/or total uncertainty through the measurement of variable, blind combinations of simulated waste drums and certified radioactive standards. Each facility must successfully participate in the PDP using each different type of measurement system planned for use in waste characterization. The first cycle of the PDP using each different type of measurement system planned for use in waste characterization. The first cycle of the PDP was completed in July 1996 and the second is scheduled for completion by December 1996. Seven sites reported data in cycle 1 for 11 different measurement systems. This paper describes the design and operation of the PDP and provides the performance data from cycle 1. It also describes the preliminary results from cycle 2 and updates the status and future plans for the NDA PDP. 4 refs., 9 figs., 11 tabs.

  2. Hazardous Waste Development, Demonstration, and Disposal (HAZWDDD) Program Plan

    International Nuclear Information System (INIS)

    McGinnis, C.P.; Eisenhower, B.M.; Reeves, M.E.; DePaoli, S.M.; Stinton, L.H.; Harrington, E.H.

    1989-02-01

    The objective of the Hazardous Waste Development, Demonstration and Disposal (HAZWDDD) Program Plan is to ensure that the needs for treatment and disposal of all its hazardous and mixed wastes have been identified and planned for. A multifaceted approach to developing and implementing this plan is given, including complete plans for each of the five installations, and an overall integrated plan is also described in this report. The HAZWDDD Plan accomplishes the following: (1) provides background and organizational information; (2) summarizes the 402 hazardous and mixed waste streams from the five installations by grouping them into 13 general waste categories; (3) presents current treatment, storage, and disposal capabilities within Energy Systems; (4) develops a management strategy by outlining critical issues, presents flow sheets describing management schemes for problem waste streams, and builds on the needs identified; (5) outlines specific activities needed to implement the strategy developed; and (6) presents schedule and budget requirements for the next decade. The HAZWDDD Program addresses current and future technical problems and regulatory issues and uncertainties. Because of the nature and magnitude of the problems in hazardous and mixed waste management, substantial funding will be required. 10 refs., 39 figs., 16 tabs

  3. Vertical boreholes in salt - An industrial demonstration program -

    International Nuclear Information System (INIS)

    Bollingerfehr, W.; Filbert, W.

    2006-01-01

    In order to synchronize and optimize the emplacement technologies used for both categories of waste (vitrified waste and spent fuel) the borehole emplacement technique for consolidated spent fuel was reconsidered in Germany. The appropriate design resulted in a fuel rod canister of the type 'BSK 3'. This BSK 3 steel canister is of the same diameter as the standard HLW-canister which allows the use of a common transfer and handling technique. The canister is tightly sealed by welding and designed to withstand petrostatic pressure. Thermal calculations showed that the emplacement of a BSK 3-canister into a vertical borehole in a salt repository is possible after only about 3 to 7 years after reactor unloading of the fuel assemblies. Thus, the emplacement of BSK 3-canisters allows a complete revision of the schedule of spent fuel disposal concepts and may lead to a considerable reduction of time and costs. Accordingly, a research program was launched in 2004 within the framework of the 6th European Research Program to develop the transport and emplacement components, the functionality and reliability of which are to be tested in a one-year demonstration phase which will commence at the beginning of 2008. (author)

  4. Early Site Permit Demonstration Program: Regulatory criteria evaluation report

    International Nuclear Information System (INIS)

    1993-03-01

    The primary objective of the Early Site Plan Demonstration Program (ESPDP) is to demonstrate successfully the use of 10CFR52 to obtain ESPs for one or more US sites for one (or more) ALWR nuclear power plants. It is anticipated that preparation of the ESP application and interaction with NRC during the application review process will result not only in an ESP for the applicant(s) but also in the development of criteria and definition of processes, setting the precedent that facilitates ESPs for subsequent ESP applications. Because siting regulatory processes and acceptance criteria are contained in over 100 separate documents, comprehensive licensing and technical reviews were performed to establish whether the requirements and documentation are self-consistent, whether the acceptance criteria are sufficiently well-defined and clear, and whether the licensing process leading to the issuance of an ESP is unambiguously specified. This document provides appendices C and D of this report. Appendix C contains data from the licensing and technical reviews; Appendix D contains technology toolkit data sheets

  5. Early Site Permit Demonstration Program: Regulatory criteria evaluation report

    International Nuclear Information System (INIS)

    1993-03-01

    The primary objective of the Early Site Plan Demonstration Program (ESPDP) is to demonstrate successfully the use of 10CFR52 to obtain ESPs for one or more US sites for one (or more) ALWR nuclear power plants. It is anticipated that preparation of the ESP application and interaction with NRC during the application review process will result not only in an ESP for the applicant(s) but also in the development of criteria and definition of processes, setting the precedent that facilitates ESPs for subsequent ESP applications. Because siting regulatory processes and acceptance criteria are contained in over 100 separate documents, comprehensive licensing and technical reviews were performed to establish whether the requirements and documentation are self-consistent, whether the acceptance criteria are sufficiently well-defined and clear, and whether the licensing process leading to the issuance of an ESP is unambiguously specified. This document provides appendices A and B of this report. Appendix A contains a list of regulations, regulatory guidance, and acceptance criteria; Appendix B contains a cross-reference index of siting-related documentation

  6. Laser restorative dentistry in children and adolescents.

    Science.gov (United States)

    Olivi, G; Genovese, M D

    2011-04-01

    The idea of substituting a drill with a laser light, has led to its introduction in dentistry. Besides being more accepted to patients, in paediatric dentistry the laser has demonstrated safety compared with rotating instruments. A review of the past 20 years of the dental literature concerning laser use in dentistry, including paediatric dentistry was completed. The findings of that review are presented. The various types of lasers and their uses for caries detection, tooth sealing and caries removal are described. Laser caries detection demonstrated a good reproducibility, reliability and predictability to monitor the caries process over time. Erbium lasers have been found to be efficient for caries removal, tooth cleaning and decontamination. The laser erbium technology represents a safe device to effectively and selectively remove carious tissues from decayed teeth. For children, all the recognized advantages of this technique play a decisive role in the successful day-to-day treatment of dental caries.

  7. 34 CFR 426.1 - What is the Cooperative Demonstration Program?

    Science.gov (United States)

    2010-07-01

    ... What is the Cooperative Demonstration Program? The Cooperative Demonstration Program provides financial...; (b) Projects that are examples of successful cooperation between the private sector and public...

  8. Jersey City energy conservation demonstration program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Newbold, R.F.

    1978-08-01

    The Aerospace Corporation, the City Government, and the Board of Education of Jersey City have conducted a group of energy-conservation experiments to explore a number of conservation techniques believed to offer quick payback and to be of wide applicability. Experiments include the updating and/or rehabilitation of the energy-consuming features of old buildings and installation of devices designed to minimize energy losses caused by human error or laxity. Specific examples include: upgrading of the deteriorated and inefficient steam-distribution system of the city hall (originally constructed in 1894); an extensive program of reducing infiltration in an old school building; use of several timing devices in connection with heating, ventilation, and lighting systems to encourage energy-conservation practices; retrofit of school classrooms with high-pressure sodium lamps; and demonstration of practical and cost-effective ways of increasing the efficiency of conventional steam boilers. The report presents: the nature of the selected experiments; technical, human, and organizational factors that proved significant in performing and evaluating the experiments; discussions of observations and lessons learned; and general recommendations for an extended program of energy conservation in local governments. It is emphasized that, in retrofit of existing buildings, the unexpected is commonplace; and the habits and attitudes of building occupants are elements of the system that must always be taken into account. This report shows the benefits of energy saving, cost saving, and added comfort that may be attained by retrofitting old buildings, noting typical complications that arise. The effectiveness of the conservation methods is presented in terms of costs relative to effective payback periods calculated from results of their application in Jersey City.

  9. Laser in operative dentistry

    Directory of Open Access Journals (Sweden)

    E. Yasini

    1994-06-01

    Full Text Available Today laser has a lot of usage in medicine and dentistry. In the field of dentistry, laser is used in soft tissue surgery, sterilization of canals (in root canal therapy and in restorative dentistry laser is used for cavity preparation, caries removal, sealing the grooves (in preventive dentistry, etching enamel and dentin, composite polymerization and removal of tooth sensitivity. The use of Co2 lasers and Nd: YAG for cavity preparation, due to creating high heat causes darkness and cracks around the region of laser radiation. Also due to high temperature of these lasers, pulp damage is inevitable. So today, by using the Excimer laser especially the argon floride type with a wavelength of 193 nm, the problem of heat stress have been solved, but the use of lasers in dentistry, especially for cavity preparation needs more researches and evaluations.

  10. Montana Integrated Carbon to Liquids (ICTL) Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    Fiato, Rocco A. [Accelergy Corporation, Houston, TX (United States); Sharma, Ramesh [Univ. of North Dakota, Grand Forks, ND (United States). Energy & Environmental Research Center (EERC); Allen, Mark [Accelergy Corporation, Houston, TX (United States). Integrated Carbon Solutions; Peyton, Brent [Montana State Univ., Bozeman, MT (United States); Macur, Richard [Montana State Univ., Bozeman, MT (United States). Dept. of Land Resources and Environmental Sciences; Cameron, Jemima [Australian Energy Company Ltd., Hovea (Australia). Australian American Energy Corporation (AAEC)

    2013-12-01

    Integrated carbon-to-liquids technology (ICTL) incorporates three basic processes for the conversion of a wide range of feedstocks to distillate liquid fuels: (1) Direct Microcatalytic Coal Liquefaction (MCL) is coupled with biomass liquefaction via (2) Catalytic Hydrodeoxygenation and Isomerization (CHI) of fatty acid methyl esters (FAME) or trigylceride fatty acids (TGFA) to produce liquid fuels, with process derived (3) CO2 Capture and Utilization (CCU) via algae production and use in BioFertilizer for added terrestrial sequestration of CO2, or as a feedstock for MCL and/or CHI. This novel approach enables synthetic fuels production while simultaneously meeting EISA 2007 Section 526 targets, minimizing land use and water consumption, and providing cost competitive fuels at current day petroleum prices. ICTL was demonstrated with Montana Crow sub-bituminous coal in MCL pilot scale operations at the Energy and Environmental Research Center at the University of North Dakota (EERC), with related pilot scale CHI studies conducted at the University of Pittsburgh Applied Research Center (PARC). Coal-Biomass to Liquid (CBTL) Fuel samples were evaluated at the US Air Force Research Labs (AFRL) in Dayton and greenhouse tests of algae based BioFertilizer conducted at Montana State University (MSU). Econometric modeling studies were also conducted on the use of algae based BioFertilizer in a wheat-camelina crop rotation cycle. We find that the combined operation is not only able to help boost crop yields, but also to provide added crop yields and associated profits from TGFA (from crop production) for use an ICTL plant feedstock. This program demonstrated the overall viability of ICTL in pilot scale operations. Related work on the Life Cycle Assessment (LCA) of a Montana project indicated that CCU could be employed very effectively to reduce the overall carbon footprint of the MCL/CHI process. Plans are currently being made to conduct larger

  11. Technology demonstration of starshade manufacturing for NASA's Exoplanet mission program

    Science.gov (United States)

    Kasdin, N. J.; Lisman, D.; Shaklan, S.; Thomson, M.; Cady, E.; Martin, S.; Marchen, L.; Vanderbei, R. J.; Macintosh, B.; Rudd, R. E.; Savransky, D.; Mikula, J.; Lynch, D.

    2012-09-01

    It is likely that the coming decade will see the development of a large visible light telescope with enabling technology for imaging exosolar Earthlike planets in the habitable zone of nearby stars. One such technology utilizes an external occulter, a satellite flying far from the telescope and employing a large screen, or starshade, to suppress the incoming starlight suffciently for detecting and characterizing exoplanets. This trades the added complexity of building the precisely shaped starshade and flying it in formation against simplifications in the telescope since extremely precise wavefront control is no longer necessary. In this paper we present the results of our project to design, manufacture, and measure a prototype occulter petal as part of NASA's first Technology Development for Exoplanet Missions program. We describe the mechanical design of the starshade and petal, the precision manufacturing tolerances, and the metrology approach. We demonstrate that the prototype petal meets the requirements and is consistent with a full-size occulter achieving better than 10-10 contrast.

  12. Clean Coal Technology Demonstration Program: Program update 1991 (as of December 31, 1991)

    International Nuclear Information System (INIS)

    1992-02-01

    The Clean Coal Technology Demonstration Program (also referred to as the CCT Program) is a government and industry cofunded technology development effort to demonstrate a new generation of innovative coal utilization processes in a series of large-scale ''showcase'' facilities built across the country. The program takes the most promising advanced coal-based technologies and moves them into the commercial marketplace through demonstration. These demonstrations are on a scale large enough to generate all the data, from design, construction and operation, that are necessary for the private sector to judge commercial potential and make informed, confident decisions on commercial readiness. The CCT Program has been identified in the National Energy Strategy as major initiative supporting the strategy's overall goals to: increase efficiency of energy use; secure future energy supplies; enhance environmental quality; fortify foundations. The technologies being demonstrated under the CCT Program when commercially available will enable coal to reach its full potential as a source of energy for the nation and the international marketplace. The goal of the program is to furnish the US and international energy marketplaces with a number of advanced, highly efficient, and environmentally acceptable coal-using technologies

  13. Blue Box Plus Quinte regional recycling demonstration program

    Energy Technology Data Exchange (ETDEWEB)

    1992-08-01

    The Blue Box Plus recycling program was established in September 1990 in the Quinte region of Ontario. The program was intended to develop the necessary operational information so that the existing program could expand to include mixed plastics, corrugated cardboard, and boxboard. Over 33,000 recycling boxes were distributed over an area covering 15 municipalities with a population base of 95,000. The program showed the willingness of the public to participate in recycling, but advertising and promotion of the program were critical for success. Separation of the recycled materials on the collection trucks was found to be a viable approach and more efficient than sorting at the recycling plant. Adding new materials to be recycled could be done efficiently, and operating costs were in line with those for other programs collecting fewer materials. A cooperative market development with industrial players opened up a new and expanding market for boxboard. 6 figs., 9 tabs.

  14. Ethical advertising in dentistry.

    Science.gov (United States)

    Graskemper, Joseph P

    2009-01-01

    Advertising in dentistry has steadily increased since the 1970s to become a leading choice of many dentists to promote their practices. The manner in which advertising progresses within the profession affects all dentists and how patients perceive dentistry as a profession. This paper presents ethical concepts that should be followed when dentists are pursuing practice promotion through advertising. It also raises questions that, hopefully, will increase attention and discussion on dental advertising. The paper concludes that ethical advertising is easily achieved by promoting patient education while not placing the dentist's self-interests ahead of the patient's. With this approach, dentistry may continue to be one of the most trusted professions.

  15. What about narrative dentistry?

    Science.gov (United States)

    Vergnes, Jean-Noel; Apelian, Nareg; Bedos, Christophe

    2015-06-01

    Narrative medicine strives toward a humanized form of medicine in which empathy and the ability to listen are developed with the same emphasis as scientific rigor. We hypothesize that the adoption of narrative medicine in dentistry would be an excellent method to cultivate the philosophy behind the emerging clinical concept of patient-centered dentistry. Reading literary works, reflective writing, and creative writing would sensitize practitioners to the daily lives of people, human uniqueness, and alterity. Narrative dentistry could lead to more empathic and self-aware practices, and improve dental professionals' observational abilities by making them more perceptive and more attentive to image, metaphor, and meaning. The introduction of narrative dentistry would enrich the clinical clerkship of dentists by bringing the often-missing humanities to the dental professional, academic, and scientific environment. Copyright © 2015 American Dental Association. Published by Elsevier Inc. All rights reserved.

  16. A Demonstration of the Grrr Graph Rewriting Programming Language

    OpenAIRE

    Rodgers, Peter; Vidal, Natalia

    2000-01-01

    This paper overviews the graph rewriting programming language, Grrr. The serial graph rewriting strategy is detailed, and key elements of the user interface are described. The system is illustrated by a simple example.

  17. FY-94 buried waste integrated demonstration program report

    International Nuclear Information System (INIS)

    1994-01-01

    The Buried Waste Integrated Demonstration (BWID) supports the applied research, development, demonstration, and evaluation of a multitude of advanced technologies. These technologies are being integrated to form a comprehensive remediation system for the effective and efficient remediation of buried waste. These efforts are identified and coordinated in support of the U.S. Department of Energy (DOE), Environmental Restoration and Waste Management (ER/WM) needs and objectives. This document summarizes previous demonstrations and describes the FY-94 BWID technology development and demonstration activities. Sponsored by the DOE Office of Technology Development (OTD), BWID works with universities and private industry to develop these technologies, which are being transferred to the private sector for use nationally and internationally. A public participation policy has been established to provide stakeholders with timely and accurate information and meaningful opportunities for involvement in the technology development and demonstration process

  18. Low-E Retrofit Demonstration and Educational Program

    Energy Technology Data Exchange (ETDEWEB)

    Culp, Thomas D [Birch Point Consulting LLC; Wiehagen, Joseph [Home Innovation Research Labs, Inc.; Drumheller, S Craig [Home Innovation Research Labs, Inc.; Siegel, John [Quanta Technologies Inc.; Stratmoen, Todd [Larson Manufacturing

    2013-11-16

    The objective of this project was to demonstrate the capability of low-emissivity (low-E) storm windows / panels and low-E retrofit glazing systems to significantly and cost effectively improve the energy efficiency of both existing residential and commercial buildings. The key outcomes are listed below: RESIDENTIAL CASE STUDIES: (a) A residential case study in two large multifamily apartment buildings in Philadelphia showed a substantial 18-22% reduction in heating energy use and a 9% reduction in cooling energy use by replacing old clear glass storm windows with modern low-E storm windows. Furthermore, the new low-E storm windows reduced the overall apartment air leakage by an average of 10%. (b) Air leakage testing on interior low-E panels installed in a New York City multifamily building over windows with and without AC units showed that the effective leakage area of the windows was reduced by 77-95%. (c) To study the use of low-E storm windows in a warmer mixed climate with a balance of both heating and cooling, 10 older homes near Atlanta with single pane windows were tested with three types of exterior storm windows: clear glass, low-E glass with high solar heat gain, and low-E glass with lower solar heat gain. The storm windows significantly reduced the overall home air leakage by an average of 17%, or 3.7 ACH50. Considerably high variability in the data made it difficult to draw strong conclusions about the overall energy usage, but for heating periods, the low-E storm windows showed approximately 15% heating energy savings, whereas clear storm windows were neutral in performance. For cooling periods, the low-E storm windows showed a wide range of performance from 2% to over 30% cooling energy savings. Overall, the study showed the potential for significantly more energy savings from using low-E glass versus no storm window or clear glass storm windows in warmer mixed climates, but it is difficult to conclusively say whether one type of low-E performed

  19. Minimum intervention dentistry: periodontics and implant dentistry.

    Science.gov (United States)

    Darby, I B; Ngo, L

    2013-06-01

    This article will look at the role of minimum intervention dentistry in the management of periodontal disease. It will discuss the role of appropriate assessment, treatment and risk factors/indicators. In addition, the role of the patient and early intervention in the continuing care of dental implants will be discussed as well as the management of peri-implant disease. © 2013 Australian Dental Association.

  20. Alternate retrieval technology demonstrations program - test report (ARD Environmental, Inc.)

    Energy Technology Data Exchange (ETDEWEB)

    Berglin, E.J.

    1997-07-31

    A prototype vehicle, control system, and waste and water scavenging system were designed and fabricated with essentially the full capabilities of the vehicle system proposed by ARD Environmental. A test tank mockup, including riser and decontamination chamber were designed and fabricated, and approximately 830 cubic feet of six varieties of waste simulants poured. The tests were performed by ARD Environmental personnel at its site in Laurel, Maryland, from 4/22/97 through 5/2/97. The capabilities tested were deployment and retrieval, extended mobility and productivity, the ability to operate the system using video viewing only, retrieval after simulated failure, and retrieval and decontamination. Testing commenced with deployment of the vehicle into the tank. Deployment was accomplished using a crane and auxiliary winch to position the vehicle and lower it through the decontamination chamber, into the 36`` diameter x 6` high riser, and touch down on the waste field in the tank. The initial mobility tests were conducted immediately after deployment, prior to sluicing, as the waste field exhibited the greatest amount of variation at this time. This test demonstrated the ability of the vehicle to maneuver over the simulated waste field, and the ability of the operator to work with only video viewing available. In addition, the ability of the vehicle to right itself after being turned on its side was demonstrated. The production rate was evaluated daily through the testing period by measuring the surface and estimating the amount of material removed. The test demonstrated the ability of the vehicle to reduce the waste surface using 400 psi (nominal) water jets, scavenge water and material from the work area, and move to any location, even in the relatively confined space of the 20` diameter test tank. In addition, the ability to sluice to a remote scavenging module was demonstrated. The failure mode test demonstrated the ability to retrieve a stuck vehicle by pulling

  1. Alternate retrieval technology demonstrations program - test report (ARD Environmental, Inc.)

    International Nuclear Information System (INIS)

    Berglin, E.J.

    1997-01-01

    A prototype vehicle, control system, and waste and water scavenging system were designed and fabricated with essentially the full capabilities of the vehicle system proposed by ARD Environmental. A test tank mockup, including riser and decontamination chamber were designed and fabricated, and approximately 830 cubic feet of six varieties of waste simulants poured. The tests were performed by ARD Environmental personnel at its site in Laurel, Maryland, from 4/22/97 through 5/2/97. The capabilities tested were deployment and retrieval, extended mobility and productivity, the ability to operate the system using video viewing only, retrieval after simulated failure, and retrieval and decontamination. Testing commenced with deployment of the vehicle into the tank. Deployment was accomplished using a crane and auxiliary winch to position the vehicle and lower it through the decontamination chamber, into the 36'' diameter x 6' high riser, and touch down on the waste field in the tank. The initial mobility tests were conducted immediately after deployment, prior to sluicing, as the waste field exhibited the greatest amount of variation at this time. This test demonstrated the ability of the vehicle to maneuver over the simulated waste field, and the ability of the operator to work with only video viewing available. In addition, the ability of the vehicle to right itself after being turned on its side was demonstrated. The production rate was evaluated daily through the testing period by measuring the surface and estimating the amount of material removed. The test demonstrated the ability of the vehicle to reduce the waste surface using 400 psi (nominal) water jets, scavenge water and material from the work area, and move to any location, even in the relatively confined space of the 20' diameter test tank. In addition, the ability to sluice to a remote scavenging module was demonstrated. The failure mode test demonstrated the ability to retrieve a stuck vehicle by pulling

  2. A demonstration program to evaluate centralized LLW Incineration

    International Nuclear Information System (INIS)

    Burian, R.J.

    1984-01-01

    Dramatic increases in low level waste burial charges in the last five years have spurred interest in achieving higher volume reduction than currently achieved by compaction. Battelle has completed a planning study to demonstrate the technical and economic feasibility of central site incineration for dry active waste to service several generators within a geographical area. We initiated licensing by the USNRC and Ohio EPA and developed plans, procedures, and estimated costs for licensing, construction, operation, and decommissioning of a central site incinerator. In addition, acceptance criteria were established for incoming waste. Response from the NRC and Ohio EPA indicated that no major obstacles existed toward obtaining licenses. The economic study indicated that a commercial incineration operation lasting 20 years or more was economically advantageous over direct burial of compacted waste, assuming that burial costs continue to escalate at their current rates. However, a 5-year demonstration period was not economically advantageous because of the short period to recover the fixed capital investment

  3. Caterpillar MorElectric DOE Idle Reduction Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    John Bernardi

    2007-09-30

    This project titled 'Demonstration of the New MorElectric{trademark} Technology as an Idle Reduction Solution' is one of four demonstration projects awarded by the US Department of Energy in 2002. The goal of these demonstration and evaluation projects was to gather objective in-use information on the performance of available idle reduction technologies by characterizing the cost; fuel, maintenance, and engine life savings; payback; and user impressions of various systems and techniques. In brief, the Caterpillar Inc. project involved applying electrically driven accessories for cab comfort during engine-off stops and for reducing fuel consumption during on-highway operation. Caterpillar had equipped and operated five new trucks with the technology in conjunction with International Truck and Engine Corporation and COX Transfer. The most significant result of the project was a demonstrated average idle reduction of 13.8% for the 5 truck MEI fleet over the control fleet. It should be noted that the control fleet trucks were also equipped with an idle reduction device that would start and stop the main engine automatically in order to maintain cab temperature. The control fleet idle usage would have been reduced by 3858 hours over the 2 year period with the MEI system installed, or approximately 2315 gallons of fuel less (calculations assume a fuel consumption of 0.6 gallons per hour for the 13 liter engine at idle). The fuel saved will be significantly larger for higher displacement engines without idle reduction equipment such as the engine auto start/stop device used by COX Transfer. It is common for engines to consume 1.0 gallons per hour which would increase the fuel savings to approximately 1260 gallons per truck per year of typical idling (1800 hours idle/yr).

  4. Daemen Alternative Energy/Geothermal Technologies Demonstration Program, Erie County

    Energy Technology Data Exchange (ETDEWEB)

    Beiswanger, Robert C. [Daemen College, Amherst, NY (United States)

    2013-02-28

    The purpose of the Daemen Alternative Energy/Geothermal Technologies Demonstration Project is to demonstrate the use of geothermal technology as model for energy and environmental efficiency in heating and cooling older, highly inefficient buildings. The former Marian Library building at Daemen College is a 19,000 square foot building located in the center of campus. Through this project, the building was equipped with geothermal technology and results were disseminated. Gold LEED certification for the building was awarded. 1) How the research adds to the understanding of the area investigated. This project is primarily a demonstration project. Information about the installation is available to other companies, organizations, and higher education institutions that may be interested in using geothermal energy for heating and cooling older buildings. 2) The technical effectiveness and economic feasibility of the methods or techniques investigated or demonstrated. According to the modeling and estimates through Stantec, the energy-efficiency cost savings is estimated at 20%, or $24,000 per year. Over 20 years this represents $480,000 in unrestricted revenue available for College operations. See attached technical assistance report. 3) How the project is otherwise of benefit to the public. The Daemen College Geothermal Technologies Ground Source Heat Pumps project sets a standard for retrofitting older, highly inefficient, energy wasting and environmentally irresponsible buildings that are quite typical of many of the buildings on the campuses of regional colleges and universities. As a model, the project serves as an energy-efficient system with significant environmental advantages. Information about the energy-efficiency measures is available to other colleges and universities, organizations and companies, students, and other interested parties. The installation and renovation provided employment for 120 individuals during the award period. Through the new Center

  5. Defense waste cyclone incinerator demonstration program: April-September 1980

    International Nuclear Information System (INIS)

    Klingler, L.M.

    1981-01-01

    An improved offgas system is being designed. The new system will improve gas cleaning and will also provide for improved offgas sampling and mass balance data collection. Continuous solid feed burning experiments were delayed pending delivery of shredding equipment. Liquid burning experiments were in progress at fiscal year end. Burn data indicate that the incinerator will work well for combustible liquids. Improved data on incinerator performance will be generated upon completion of system changes and utilization of new sampling and analysis equipment. Mound Facility received advanced guidance from the Transuranic Waste Systems Office that this program will be cancelled in FY-1981 because of reductions in funding levels

  6. Early Site Permit Demonstration Program: Station design alternatives report

    International Nuclear Information System (INIS)

    1993-03-01

    This report provides the results of investigating the basis for including Station Design Alternatives (SDAs) in the regulatory guidance given for nuclear plant environmental reports (ERs), explains approaches or processes for evaluating SDAs at the early site permit (ESP) stage, and applies one of the processes to each of the ten systems or subsystems considered as SDAS. The key objective o this report s to demonstrate an adequate examination of alternatives can be performed without the extensive development f design data. The report discusses the Composite Suitability Approach and the Established Cutoff Approach in evaluating station design alternatives and selects one of these approaches to evaluate alternatives for each of the plant or station that were considered. Four types of ALWRs have been considered due to the availability of extensive plant data: System 80+, AP600, Advanced Boiling Reactor (ABWR), and Simplified Boiling Water Reactor (SBWR). This report demonstrates the feasibility of evaluating station design alternatives when reactor design detail has not been determined, quantitatively compares the potential ental impacts of alternatives, and focuses the ultimate selection of a alternative on cost and applicant-specific factors. The range of alternatives system is deliberately limited to a reasonable number to demonstrate the or to the three most commonly used at operating plants

  7. The Reusable Launch Vehicle Technology Program and the X-33 Advanced Technology Demonstrator

    Science.gov (United States)

    Cook, Stephen A.

    1995-01-01

    The goal of the Reusable Launch Vehicle (RLV) technology program is formulated, and the primary objectives of RLV are listed. RLV technology program implementation phases are outlined. X-33 advanced technology demonstrator is described. Program management is addressed.

  8. Photovoltaic test and demonstration project. [residential energy program

    Science.gov (United States)

    Forestieri, A. F.; Brandhorst, H. W., Jr.; Deyo, J. N.

    1976-01-01

    The considered project consists of three subprojects related to applications, device performance and diagnostics, and endurance testing. The objectives of the applications subproject include the determination of the operating characteristics for a variety of photovoltaic conversion systems. A system test facility is being constructed in this connection and a prototype residence experiment is to be conducted. Market demand for solar cells is to be stimulated by demonstrating suitability of solar cells for specific near-term applications. Activities conducted in connection with device performance studies and diagnostics are also discussed along with developments in the area of endurance testing.

  9. 75 FR 82567 - Federal Acquisition Regulation; Repeal of the Small Business Competitiveness Demonstration Program

    Science.gov (United States)

    2010-12-30

    ... Competitiveness Demonstration Program AGENCY: Department of Defense (DoD), General Services Administration (GSA... of the Small Business Competitiveness Demonstration Program, to meet the requirements of section 1335... (15 U.S.C. 644 note), the Small Business Competitiveness Demonstration Program. In accordance with the...

  10. 34 CFR 377.1 - What is the Demonstration Projects to Increase Client Choice Program?

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false What is the Demonstration Projects to Increase Client... PROJECTS TO INCREASE CLIENT CHOICE PROGRAM General § 377.1 What is the Demonstration Projects to Increase Client Choice Program? The Demonstration Projects to Increase Client Choice Program is designed to...

  11. Defense waste cyclone incinerator demonstration program: October--March 1979

    International Nuclear Information System (INIS)

    Klinger, L.M.

    1979-01-01

    The cyclone incinerator developed at Mound has proven to be an effective tool for waste volume reduction. During the first half of FY-1979, efforts have been made to increase the versatility of the system. Incinerator development was continued in three areas. Design changes were drafted for the present developmental incinerator to rectify several minor operational deficiencies of the system. Improvements will be limited to redesign unless installation is required to prove design or to permit implementation of other portions of the plan. The applications development portion of the feasibility plan is focused upon expanding the versatility of the incinerator. An improved delivery system was installed for burning various liquids. An improved continuous feed system was installed and will be demonstrated later this year. Late in FY-1979, work will begin on the conceptual design of a production cyclone incinerator which will handle nonrecoverable TRU waste, and which will fully demonstrate the capabilities of the cyclone incinerator system. Data generated in past years and during FY-1979 are being collected to establish cyclone incineration effects on solids, liquids, and gases in the system. Data reflecting equipment life cycles and corrosion have been tabulated. Basic design criteria for a cyclone incinerator system based on developmental work on the incinerator through FY-1979 have been assembled. The portion of the material dealing with batch-type operation of the incinerator will be published later this year

  12. Status of the Visible Nulling Coronagraph Technology Demonstration Program

    Science.gov (United States)

    Clampin, M.; Lyon, R.

    2012-01-01

    We report on the development, sensing and control of the Vacuum Nuller Testbed to realize a Visible Nulling Coronagraphy (VNC) for exoplanet detection and characterization. The VNC is one of the few approaches that works with filled, segmented and sparse or diluted-aperture telescope systems. It thus spans a range of potential future NASA telescopes and could be flown as a separate instrument on such a future mission. NASA/Goddard Space Flight Center has an established effort to develop VNC technologies, and an incremental sequence of testbeds to advance this approach and its critical technologies. We will highlight results demonstrating the achievement of our TDEM contrast milestones, and highlight the performance of our wavefront sensing and control concept.

  13. Demand in Pediatric Dentistry for Sedation and General Anesthesia by Dentist Anesthesiologists: A Survey of Directors of Dentist Anesthesiologist and Pediatric Dentistry Residencies

    OpenAIRE

    Hicks, C. Gray; Jones, James E.; Saxen, Mark A.; Maupome, Gerardo; Sanders, Brian J.; Walker, LaQuia A.; Weddell, James A.; Tomlin, Angela

    2012-01-01

    This study describes what training programs in pediatric dentistry and dental anesthesiology are doing to meet future needs for deep sedation/general anesthesia services required for pediatric dentistry. Residency directors from 10 dental anesthesiology training programs in North America and 79 directors from pediatric dentistry training programs in North America were asked to answer an 18-item and 22-item online survey, respectively, through an online survey tool. The response rate for the 1...

  14. Informed Consent in Dentistry.

    Science.gov (United States)

    Reid, Kevin I

    2017-03-01

    A review of literature regarding informed consent in dentistry reveals a paucity of information and minimal scholarship devoted to this subject. But this begs the question about informed consent somehow being different for dentistry than for medicine or other healthcare delivery. My account draws distinctions where appropriate but is rooted in the premise that informed consent is an ethical construct applicable to vulnerable people as patients independent of what type of treatment or body part being considered. This paper highlights the crucial importance of the process of informed consent and refusal in dentistry, underscoring its important place in oral healthcare. This paper will not address the unique circumstances involving consent in those without capacity or focus on informed consent in the research setting; our focus will be on those patients with full decisionmaking capacity in the clinical setting. I will emphasize the importance of disclosure of treatment options and highlight the benefits of shared-decision-making in the informed consent process.

  15. Brexit and dentistry.

    Science.gov (United States)

    Sinclair, E; Stagnell, S; Shah, S

    2016-05-27

    On 23 June 2016, eligible UK voters will be asked to decide whether to vote in the EU referendum. The EU impacts on our daily lives in more ways than many people realise. Dentistry is affected by EU legislation. Examples include the movement of dental professionals, the import of dental equipment and materials, as well as health and safety legislation. Many more EU dentists and DCPs come to the UK to work than vice versa. These numbers have increased markedly since 2004. The result of the vote may affect how dentistry operates in the UK in future years. In addition, a vote to stay would not necessarily prevent change. There are attempts underway to increase the ease by which professionals can work in other member states, especially on a temporary basis. This too is likely affect dentistry at some point. Workforce planners and policy makers should factor in the impact of the EU in future dental policy.

  16. Early Site Permit Demonstration Program: Regulatory criteria evaluation report

    International Nuclear Information System (INIS)

    1993-03-01

    The primary objective of the ESPDP is to demonstrate successfully the use of 10CFR52 to obtain ESPs for one or more US sites for one (or more) ALWR nuclear power plants. It is anticipated that preparation of the ESP application and interaction with NRC during the application review process will result not only in an ESP for the applicant(s) but also in the development of criteria and definition of processes, setting the precedent that facilitates ESPs for subsequent ESP applications. Because siting regulatory processes and acceptance criteria are contained in over 100 separate documents, comprehensive licensing and technical reviews were performed to establish whether the requirements and documentation are self-consistent, whether the acceptance criteria are sufficiently well-defined and clear, and whether the licensing process leading to the issuance of an ESP is unambiguously specified. The results of the technical and licensing evaluations are presented in this report. The purpose, background, and organization of the ESPDP is delineated in Section 1. Section 11 contains flowcharts defining siting application requirements, environmental report requirements, and emergency planning/preparedness requirements for ALWRS. The licensing and technical review results are presented in Section III

  17. Early Site Permit Demonstration Program: Regulatory criteria evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    The primary objective of the ESPDP is to demonstrate successfully the use of 10CFR52 to obtain ESPs for one or more US sites for one (or more) ALWR nuclear power plants. It is anticipated that preparation of the ESP application and interaction with NRC during the application review process will result not only in an ESP for the applicant(s) but also in the development of criteria and definition of processes, setting the precedent that facilitates ESPs for subsequent ESP applications. Because siting regulatory processes and acceptance criteria are contained in over 100 separate documents, comprehensive licensing and technical reviews were performed to establish whether the requirements and documentation are self-consistent, whether the acceptance criteria are sufficiently well-defined and clear, and whether the licensing process leading to the issuance of an ESP is unambiguously specified. The results of the technical and licensing evaluations are presented in this report. The purpose, background, and organization of the ESPDP is delineated in Section 1. Section 11 contains flowcharts defining siting application requirements, environmental report requirements, and emergency planning/preparedness requirements for ALWRS. The licensing and technical review results are presented in Section III.

  18. Industrial Fuel Gas Demonstration Plant Program: environmental permit compliance plan

    Energy Technology Data Exchange (ETDEWEB)

    Bodamer, Jr., James W.; Bocchino, Robert M.

    1979-11-01

    This Environmental Permit Compliance Plan is intended to assist the Memphis Light, Gas and Water Division in acquiring the necessary environmental permits for their proposed Industrial Fuel Gas Demonstration Plant in a time frame consistent with the construction schedule. Permits included are those required for installation and/or operation of gaseous, liquid and solid waste sources and disposal areas. Only those permits presently established by final regulations are described. The compliance plan describes procedures for obtaining each permit from identified federal, state and local agencies. The information needed for the permit application is presented, and the stepwise procedure to follow when filing the permit application is described. Information given in this plan was obtained by reviewing applicable laws and regulations and from telephone conversations with agency personnel on the federal, state and local levels. This Plan also presents a recommended schedule for beginning the work necessary to obtain the required environmental permits in order to begin dredging operations in October, 1980 and construction of the plant in September, 1981. Activity for several key permits should begin as soon as possible.

  19. Synthesis gas demonstration plant program, Phase I. Site confirmation report

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    With few reservations, the Baskett, Kentucky site exhibits the necessary characteristics to suggest compatibility with the proposed Synthesis Gas Demonstration Plant Project. An evaluation of a broad range of technical disciplinary criteria in consideration of presently available information indicated generally favorable conditions or, at least, conditions which could be feasibly accommodated in project design. The proximity of the Baskett site to market areas and sources of raw materials as well as a variety of transportation facilities suggests an overall favorable impact on Project economic feasibility. Two aspects of environmental engineering, however, have been identified as areas where the completion or continuation of current studies are required before removing all conditions on site suitability. The first aspect involves the current contradictory status of existing land use and planning ordinances in the site area. Additional investigation of the legality of, and local attitudes toward, these present plans is warranted. Secondly, terrestrial and aquatic surveys of plant and animal life species in the site area must be completed on a seasonal basis to confirm the preliminary conclusion that no exclusionary conditions exist.

  20. Nanomaterials in preventive dentistry

    Science.gov (United States)

    Hannig, Matthias; Hannig, Christian

    2010-08-01

    The prevention of tooth decay and the treatment of lesions and cavities are ongoing challenges in dentistry. In recent years, biomimetic approaches have been used to develop nanomaterials for inclusion in a variety of oral health-care products. Examples include liquids and pastes that contain nano-apatites for biofilm management at the tooth surface, and products that contain nanomaterials for the remineralization of early submicrometre-sized enamel lesions. However, the treatment of larger visible cavities with nanomaterials is still at the research stage. Here, we review progress in the development of nanomaterials for different applications in preventive dentistry and research, including clinical trials.

  1. Performance Demonstration Program Plan for Nondestructive Assay for the TRU Waste Characterization Program. Revision 1

    International Nuclear Information System (INIS)

    1997-01-01

    The Performance Demonstration Program (PDP) for Nondestructive Assay (NDA) consists of a series of tests conducted on a regular frequency to evaluate the capability for nondestructive assay of transuranic (TRU) waste throughout the Department of Energy (DOE) complex. Each test is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements performed with TRU waste characterization systems. Measurement facility performance will be demonstrated by the successful analysis of blind audit samples according to the criteria set by this Program Plan. Intercomparison between measurement groups of the DOE complex will be achieved by comparing the results of measurements on similar or identical blind samples reported by the different measurement facilities. Blind audit samples (hereinafter referred to as PDP samples) will be used as an independent means to assess the performance of measurement groups regarding compliance with established Quality Assurance Objectives (QAOs). As defined for this program, a PDP sample consists of a 55-gallon matrix drum emplaced with radioactive standards and fabricated matrix inserts. These PDP sample components, once manufactured, will be secured and stored at each participating measurement facility designated and authorized by Carlsbad Area Office (CAO) under secure conditions to protect them from loss, tampering, or accidental damage

  2. American Academy of Cosmetic Dentistry

    Science.gov (United States)

    ... AACD AACD 2018: A Masterpiece of Comprehensive Cosmetic Dentistry Education 34th Annual Scientific Session | April 18-21 ... 222.9540 Contact Us © 2017American Academy of Cosmetic Dentistry American Academy of Cosmetic Dentistry (AACD) © 2017American Academy ...

  3. Performance Demonstration Program Plan for Nondestructive Assay of Drummed Wastes for the TRU Waste Characterization Program

    International Nuclear Information System (INIS)

    2009-01-01

    Each testing and analytical facility performing waste characterization activities for the Waste Isolation Pilot Plant (WIPP) participates in the Performance Demonstration Program (PDP) to comply with the Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant (WAC) (DOE/WIPP-02-3122) and the Quality Assurance Program Document (QAPD) (CBFO-94-1012). The PDP serves as a quality control check for data generated in the characterization of waste destined for WIPP. Single blind audit samples are prepared and distributed to each of the facilities participating in the PDP. The PDP evaluates analyses of simulated headspace gases, constituents of the Resource Conservation and Recovery Act (RCRA), and transuranic (TRU) radionuclides using nondestructive assay (NDA) techniques.

  4. Early Site Permit Demonstration Program: Recommendations for communication activities and public participation in the Early Site Permit Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-27

    On October 24, 1992, President Bush signed into law the National Energy Policy Act of 1992. The bill is a sweeping, comprehensive overhaul of the Nation`s energy laws, the first in more than a decade. Among other provisions, the National Energy Policy Act reforms the licensing process for new nuclear power plants by adopting a new approach developed by the US Nuclear Regulatory Commission (NRC) in 1989, and upheld in court in 1992. The NRC 10 CFR Part 52 rule is a three-step process that guarantees public participation at each step. The steps are: early site permit approval; standard design certifications; and, combined construction/operating licenses for nuclear power reactors. Licensing reform increases an organization`s ability to respond to future baseload electricity generation needs with less financial risk for ratepayers and the organization. Costly delays can be avoided because design, safety and siting issues will be resolved before a company starts to build a plant. Specifically, early site permit approval allows for site suitability and acceptability issues to be addressed prior to an organization`s commitment to build a plant. Responsibility for site-specific activities, including communications and public participation, rests with those organizations selected to try out early site approval. This plan has been prepared to assist those companies (referred to as sponsoring organizations) in planning their communications and public involvement programs. It provides research findings, information and recommendations to be used by organizations as a resource and starting point in developing their own plans.

  5. Early Site Permit Demonstration Program: Recommendations for communication activities and public participation in the Early Site Permit Demonstration Program

    International Nuclear Information System (INIS)

    1993-01-01

    On October 24, 1992, President Bush signed into law the National Energy Policy Act of 1992. The bill is a sweeping, comprehensive overhaul of the Nation's energy laws, the first in more than a decade. Among other provisions, the National Energy Policy Act reforms the licensing process for new nuclear power plants by adopting a new approach developed by the US Nuclear Regulatory Commission (NRC) in 1989, and upheld in court in 1992. The NRC 10 CFR Part 52 rule is a three-step process that guarantees public participation at each step. The steps are: early site permit approval; standard design certifications; and, combined construction/operating licenses for nuclear power reactors. Licensing reform increases an organization's ability to respond to future baseload electricity generation needs with less financial risk for ratepayers and the organization. Costly delays can be avoided because design, safety and siting issues will be resolved before a company starts to build a plant. Specifically, early site permit approval allows for site suitability and acceptability issues to be addressed prior to an organization's commitment to build a plant. Responsibility for site-specific activities, including communications and public participation, rests with those organizations selected to try out early site approval. This plan has been prepared to assist those companies (referred to as sponsoring organizations) in planning their communications and public involvement programs. It provides research findings, information and recommendations to be used by organizations as a resource and starting point in developing their own plans

  6. Advances in pediatric dentistry.

    Science.gov (United States)

    Yoon, Richard K; Best, Jed M

    2011-07-01

    This article addresses advances in 4 key areas related to pediatric dentistry: (1) caries detection tools, (2) early interventions to arrest disease progression, (3) caries-risk assessment tools, and (4) trends in pediatric procedures and dental materials. Copyright © 2011 Elsevier Inc. All rights reserved.

  7. Regulatory analysis of the Underground Storage Tank-Integrated Demonstration Program

    International Nuclear Information System (INIS)

    Smith, E.H.

    1992-01-01

    The Underground Storage Tank-Integrated Demonstration (UST-ID) Program has been developed to identify, demonstrate, test, and evaluate technologies that will provide alternatives to the current underground storage tank remediation program. The UST-ID Program is a national program that consists of five participating US Department of Energy (DOE) sites where technologies can be developed an ultimately demonstrated. Once these technologies are demonstrated, the UST-ID Program will transfer the developed technology system to industry (governmental or industrial) for application or back to Research and Development for further evaluation and modification, as necessary. In order to ensure that the UST-ID Program proceeds without interruption, it will be necessary to identify regulatory requirements along with associated permitting and notification requirements early in the technology development process. This document serves as a baseline for identifying certain federal and state regulatory requirements that may impact the UST-ID Program and the demonstration of any identified technologies

  8. Performance Demonstration Program Plan for Nondestructive Assay of Drummed Wastes for the TRU Waste Characterization Program

    International Nuclear Information System (INIS)

    DOE Carlsbad Field Office

    2001-01-01

    The Performance Demonstration Program (PDP) for nondestructive assay (NDA) consists of a series of tests to evaluate the capability for NDA of transuranic (TRU) waste throughout the Department of Energy (DOE) complex. Each test is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements obtained from NDA systems used to characterize the radiological constituents of TRU waste. The primary documents governing the conduct of the PDP are the Waste Acceptance Criteria for the Waste Isolation Pilot Plant (WAC; DOE 1999a) and the Quality Assurance Program Document (QAPD; DOE 1999b). The WAC requires participation in the PDP; the PDP must comply with the QAPD and the WAC. The WAC contains technical and quality requirements for acceptable NDA. This plan implements the general requirements of the QAPD and applicable requirements of the WAC for the NDA PDP. Measurement facilities demonstrate acceptable performance by the successful testing of simulated waste containers according to the criteria set by this PDP Plan. Comparison among DOE measurement groups and commercial assay services is achieved by comparing the results of measurements on similar simulated waste containers reported by the different measurement facilities. These tests are used as an independent means to assess the performance of measurement groups regarding compliance with established quality assurance objectives (QAO's). Measurement facilities must analyze the simulated waste containers using the same procedures used for normal waste characterization activities. For the drummed waste PDP, a simulated waste container consists of a 55-gallon matrix drum emplaced with radioactive standards and fabricated matrix inserts. These PDP sample components are distributed to the participating measurement facilities that have been designated and authorized by the Carlsbad Field Office (CBFO). The NDA Drum PDP materials are stored at these sites under secure conditions to

  9. Performance Demonstration Program Plan for Nondestructive Assay of Drummed Wastes for the TRU Waste Characterization Program

    International Nuclear Information System (INIS)

    2005-01-01

    The Performance Demonstration Program (PDP) for Nondestructive Assay (NDA) is a test program designed to yield data on measurement system capability to characterize drummed transuranic (TRU) waste generated throughout the Department of Energy (DOE) complex. The tests are conducted periodically and provide a mechanism for the independent and objective assessment of NDA system performance and capability relative to the radiological characterization objectives and criteria of the Office of Characterization and Transportation (OCT). The primary documents requiring an NDA PDP are the Waste Acceptance Criteria for the Waste Isolation Pilot Plant (WAC), which requires annual characterization facility participation in the PDP, and the Quality Assurance Program Document (QAPD). This NDA PDP implements the general requirements of the QAPD and applicable requirements of the WAC. Measurement facilities must demonstrate acceptable radiological characterization performance through measurement of test samples comprised of pre-specified PDP matrix drum/radioactive source configurations. Measurement facilities are required to analyze the NDA PDP drum samples using the same procedures approved and implemented for routine operational waste characterization activities. The test samples provide an independent means to assess NDA measurement system performance and compliance per criteria delineated in the NDA PDP Plan. General inter-comparison of NDA measurement system performance among DOE measurement facilities and commercial NDA services can also be evaluated using measurement results on similar NDA PDP test samples. A PDP test sample consists of a 55-gallon matrix drum containing a waste matrix type representative of a particular category of the DOE waste inventory and nuclear material standards of known radionuclide and isotopic composition typical of DOE radioactive material. The PDP sample components are made available to participating measurement facilities as designated by the

  10. Radiation incidents in dentistry

    International Nuclear Information System (INIS)

    Lovelock, D.J.

    1996-01-01

    Most dental practitioners act as their own radiographer and radiologist, unlike their medical colleagues. Virtually all dental surgeons have a dental X-ray machine for intraoral radiography available to them and 40% of dental practices have equipment for dental panoramic tomography. Because of the low energy of X-ray equipment used in dentistry, radiation incidents tend to be less serious than those associated with other aspects of patient care. Details of 47 known incidents are given. The advent of the 1985 and 1988 Ionising Radiation Regulations has made dental surgeons more aware of the hazards of radiation. These regulations, and general health and safety legislation, have led to a few dental surgeons facing legal action. Because of the publicity associated with these court cases, it is expected that there will be a decrease in radiation incidents arising from the practice of dentistry. (author)

  11. Personalized medicine in dentistry

    Directory of Open Access Journals (Sweden)

    Pushpa S Pudakalkatti

    2017-01-01

    Full Text Available Personalized medicine is a branch of medicine that proposes customization of healthcare in which decisions and treatment are tailored according to individual patient needs. The field of personalized medicine relies on genetic information, proteomic information and clinical patient characteristics to individualize treatment. With advances in genetics, proteomics, pharmacogenetics and knowledgeable patient population, the opportunity exists to deliver never before levels of personalized care. Although general dentists may consider personalized medicine a concept for the future, the reality is that its direct application to everyday dentistry is closer than one might think. Use of personalized medicine in dentistry, especially in periodontology is progressing rapidly, and dentist should consider this approach while treating patients. Google and PubMed search was done to select articles for present review. Total 17 articles were used to compile information.

  12. Tissue engineering in dentistry.

    Science.gov (United States)

    Abou Neel, Ensanya Ali; Chrzanowski, Wojciech; Salih, Vehid M; Kim, Hae-Won; Knowles, Jonathan C

    2014-08-01

    of this review is to inform practitioners with the most updated information on tissue engineering and its potential applications in dentistry. The authors used "PUBMED" to find relevant literature written in English and published from the beginning of tissue engineering until today. A combination of keywords was used as the search terms e.g., "tissue engineering", "approaches", "strategies" "dentistry", "dental stem cells", "dentino-pulp complex", "guided tissue regeneration", "whole tooth", "TMJ", "condyle", "salivary glands", and "oral mucosa". Abstracts and full text articles were used to identify causes of craniofacial tissue loss, different approaches for craniofacial reconstructions, how the tissue engineering emerges, different strategies of tissue engineering, biomaterials employed for this purpose, the major attempts to engineer different dental structures, finally challenges and future of tissue engineering in dentistry. Only those articles that dealt with the tissue engineering in dentistry were selected. There have been a recent surge in guided tissue engineering methods to manage periodontal diseases beyond the traditional approaches. However, the predictable reconstruction of the innate organisation and function of whole teeth as well as their periodontal structures remains challenging. Despite some limited progress and minor successes, there remain distinct and important challenges in the development of reproducible and clinically safe approaches for oral tissue repair and regeneration. Clearly, there is a convincing body of evidence which confirms the need for this type of treatment, and public health data worldwide indicates a more than adequate patient resource. The future of these therapies involving more biological approaches and the use of dental tissue stem cells is promising and advancing. Also there may be a significant interest of their application and wider potential to treat disorders beyond the craniofacial region. Considering the

  13. Piezosurgery in dentistry

    Directory of Open Access Journals (Sweden)

    Dhruvakumar Deepa

    2016-01-01

    Full Text Available Piezosurgery (piezoelectric bone surgery is a technique of bone surgery which is gaining popularity in the field of dentistry in the recent years. This device is being used in osteotomies, periodontology and implantology, and oral surgical procedures. Piezoelectric ultrasonic vibrations are utilized to perform precise and safe osteotomies. This article discusses the equipment, biological effects on bone, and advantages and disadvantages of this technology.

  14. Restorative dentistry for children.

    Science.gov (United States)

    Donly, Kevin J

    2013-01-01

    This article discusses contemporary pediatric restorative dentistry. Indications and contraindications for the choice of different restorative materials in different clinical situations, including the risk assessment of the patient, are presented. The specific use of glass ionomer cement or resin-modified glass ionomer cement, resin-based composite, and stainless steel crowns is discussed so that preparation design and restoration placement is understood. Copyright © 2013 Elsevier Inc. All rights reserved.

  15. Prevention of Prosthetic Dentistry

    Directory of Open Access Journals (Sweden)

    Eremin O.V.

    2011-03-01

    Full Text Available Prevention in prosthetic dentistry is not just a regular oral hygiene and the prevention of caries in the early stages of its development. The initial goal of orthopedic and dental should be the ability to convey to the patient's sense of pros-thetics that proteziruya one saved more. An example is included prosthetic dental arch defects with bridges or single artificial crowns on implants that will prevent movement of teeth and the continuity of the dentition

  16. Nanorobots: Future in dentistry

    OpenAIRE

    Shetty, Neetha J.; Swati, P.; David, K.

    2013-01-01

    The purpose of this paper is to review the phenomenon of nanotechnology as it might apply to dentistry as a new field called nanodentistry. Treatment possibilities might include the application of nanotechnology to local anesthesia, dentition renaturalization, the permanent cure for hypersensitivity, complete orthodontic realignment in a single visit, covalently bonded diamondized enamel, and continuous oral health maintenance using mechanical dentifrobots. Dental nanorobots could be construc...

  17. Minimally legally invasive dentistry.

    Science.gov (United States)

    Lam, R

    2014-12-01

    One disadvantage of the rapid advances in modern dentistry is that treatment options have never been more varied or confusing. Compounded by a more educated population greatly assisted by online information in an increasingly litigious society, a major concern in recent times is increased litigation against health practitioners. The manner in which courts handle disputes is ambiguous and what is considered fair or just may not be reflected in the judicial process. Although legal decisions in Australia follow a doctrine of precedent, the law is not static and is often reflected by community sentiment. In medical litigation, this has seen the rejection of the Bolam principle with a preference towards greater patient rights. Recent court decisions may change the practice of dentistry and it is important that the clinician is not caught unaware. The aim of this article is to discuss legal issues that are pertinent to the practice of modern dentistry through an analysis of legal cases that have shaped health law. Through these discussions, the importance of continuing professional development, professional association and informed consent will be realized as a means to limit the legal complications of dental practice. © 2014 Australian Dental Association.

  18. Dosimetry in dentistry.

    Science.gov (United States)

    Asha, M L; Chatterjee, Ingita; Patil, Preeti; Naveen, S

    2015-01-01

    The purpose of this paper was to review various dosimeters used in dentistry and the cumulative results of various studies done with various dosimeters. Several relevant PubMed indexed articles from 1999 to 2013 were electronically searched by typing "dosimeters", "dosimeters in dentistry", "properties of dosimeters", "thermoluminescent and optically stimulated dosimeters", "recent advancements in dosimetry in dentistry." The searches were limited to articles in English to prepare a concise review on dental dosimetry. Titles and abstracts were screened, and articles that fulfilled the criteria of use of dosimeters in dental applications were selected for a full-text reading. Article was divided into four groups: (1) Biological effects of radiation, (2) properties of dosimeters, (3) types of dosimeters and (4) results of various studies using different dosimeters. The present review on dosimetry based on various studies done with dosimeters revealed that, with the advent of radiographic technique the effective dose delivered is low. Therefore, selection of radiological technique plays an important role in dental dose delivery.

  19. Interpreter-mediated dentistry.

    Science.gov (United States)

    Bridges, Susan; Drew, Paul; Zayts, Olga; McGrath, Colman; Yiu, Cynthia K Y; Wong, H M; Au, T K F

    2015-05-01

    The global movements of healthcare professionals and patient populations have increased the complexities of medical interactions at the point of service. This study examines interpreter mediated talk in cross-cultural general dentistry in Hong Kong where assisting para-professionals, in this case bilingual or multilingual Dental Surgery Assistants (DSAs), perform the dual capabilities of clinical assistant and interpreter. An initial language use survey was conducted with Polyclinic DSAs (n = 41) using a logbook approach to provide self-report data on language use in clinics. Frequencies of mean scores using a 10-point visual analogue scale (VAS) indicated that the majority of DSAs spoke mainly Cantonese in clinics and interpreted for postgraduates and professors. Conversation Analysis (CA) examined recipient design across a corpus (n = 23) of video-recorded review consultations between non-Cantonese speaking expatriate dentists and their Cantonese L1 patients. Three patterns of mediated interpreting indicated were: dentist designated expansions; dentist initiated interpretations; and assistant initiated interpretations to both the dentist and patient. The third, rather than being perceived as negative, was found to be framed either in response to patient difficulties or within the specific task routines of general dentistry. The findings illustrate trends in dentistry towards personalized care and patient empowerment as a reaction to product delivery approaches to patient management. Implications are indicated for both treatment adherence and the education of dental professionals. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Paediatric dentistry- novel evolvement

    Directory of Open Access Journals (Sweden)

    Saleha Shah, B.D.S, MClinDent Paediatric Dentistry (UK

    2018-01-01

    Full Text Available Pediatric dentistry provides primary and comprehensive preventive and therapeutic oral health care for infants and children through adolescence, together with special health care needs. This specialty encompasses a variety of skills, disciplines, procedures and techniques that share a common origin with other dental specialties however these have been modified and reformed to the distinctive requirements of infants, children, adolescents and special health care needs. Disciplines comprise of behavior guidance, care of the medically and developmentally compromised and disabled patient, supervision of orofacial growth and development, caries prevention, sedation, pharmacological management, and hospital dentistry including other traditional fields of dentistry. The skills apply to the ever-changing stages of dental, physical, and psychosocial development for treating conditions and diseases distinctive to growing individuals. Hence with the changing scope of practice it is imperative that the clinician stays updated with the current evidence based trends in practice, collaborates with other disciplines and Imparts quality oral health care tailored to the specific needs of every child.

  1. Lessons from international experience for China's microgrid demonstration program

    International Nuclear Information System (INIS)

    Romankiewicz, John; Marnay, Chris; Zhou, Nan; Qu, Min

    2014-01-01

    Microgrids can provide an avenue for increasing the amount of distributed generation (DG) and delivery of electricity, where control is more dispersed and quality of service is locally tailored to end-use requirements, with applications from military bases to campuses to commercial office buildings. Many studies have been done to date on microgrid technology and operations, but fewer studies exist on demonstration programs and commercial microgrid development. As China prepares to launch the largest microgrid demonstration program in the world, we review progress made by demonstration programs across Europe, Asia, and the Americas as well as microgrid benefits and barriers. Through case studies, we highlight the difference in experience for microgrids developed under the auspices of a government-sponsored demonstration program versus those that were commercially developed. Lastly, we provide recommendations oriented towards creating a successful microgrid demonstration program. - Highlights: • We discuss major microgrid demonstration programs in the U.S., E.U., and Asia. • We identify barriers faced by microgrids to date and propose policy solutions. • Two detailed case studies of government sponsored microgrid demonstrations are provided. • We outline eight recommendations for microgrid demonstration programs, with a focus on China's upcoming program

  2. Performance Demonstration Program Plan for Nondestructive Assay of Boxed Wastes for the TRU Waste Characterization Program

    International Nuclear Information System (INIS)

    2001-01-01

    The Performance Demonstration Program (PDP) for nondestructive assay (NDA) consists of a series of tests to evaluate the capability for NDA of transuranic (TRU) waste throughout the Department of Energy (DOE) complex. Each test is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements obtained from NDA systems used to characterize the radiological constituents of TRU waste. The primary documents governing the conduct of the PDP are the Waste Acceptance Criteria for the Waste Isolation Pilot Plant (WAC; DOE 1999a) and the Quality Assurance Program Document (QAPD; DOE 1999b). The WAC requires participation in the PDP; the PDP must comply with the QAPD and the WAC. The WAC contains technical and quality requirements for acceptable NDA. This plan implements the general requirements of the QAPD and applicable requirements of the WAC for the NDA PDP for boxed waste assay systems. Measurement facilities demonstrate acceptable performance by the successful testing of simulated waste containers according to the criteria set by this PDP Plan. Comparison among DOE measurement groups and commercial assay services is achieved by comparing the results of measurements on similar simulated waste containers reported by the different measurement facilities. These tests are used as an independent means to assess the performance of measurement groups regarding compliance with established quality assurance objectives (QAO's). Measurement facilities must analyze the simulated waste containers using the same procedures used for normal waste characterization activities. For the boxed waste PDP, a simulated waste container consists of a modified standard waste box (SWB) emplaced with radioactive standards and fabricated matrix inserts. An SWB is a waste box with ends designed specifically to fit the TRUPACT-II shipping container. SWB's will be used to package a substantial volume of the TRU waste for disposal. These PDP sample components

  3. Dry cask storage: a Vepco/DOE/EPRI cooperative demonstration program

    International Nuclear Information System (INIS)

    Smith, M.L.

    1984-01-01

    In response to a Department of Energy (DOE) Solicitation for Cooperative Agreement Proposal, Virginia Electric and Power Company (Vepco) proposed to participate in a spent fuel storage demonstration program utilizing the dry cask storage technology. This proposed program includes dry cask storage at Vepco's Surry Nuclear Power Station and research and development activities at a DOE site in support of the licensed program at Surry. Phase I of Vepco's two-phase program involves a demonstration of the licensed dry cask storage of spent fuel in an inert atmosphere at the Surry Power Station site. Phase II of Vepco's proposed program will involve the demonstration of storing unconsolidated and consolidated spent fuel in dry casks filled only with air. This phase of the program will involve DOE site testing similar to Phase I and is expected to require an additional (fourth) cask to demonstrate storage of unconsolidated spent fuel in air-filled casks

  4. Overview of the U.S. inspection capability demonstration program for CRDM penetrations

    International Nuclear Information System (INIS)

    Melton, M.; Whitaker, D.; Ammirato, F.; Pathania, R.

    1994-01-01

    The US PWR Owners have developed a coordinated program to demonstrate the effectiveness of procedures for inspection of the Control Rod Drive Mechanism (CRDM) nozzle penetrations. The purpose of the inspections is to detect inside surface Primary Water Stress Corrosion Cracking (PWSCC). Reactor vessel manufacturers, PWR Owners Groups, and EPRI are participating in this cooperative program. Flaw detection, sizing, and location capability will be assessed in the program using realistic full-scale mockups containing intentional defects. The program is expected to be completed by January 1, 1994 and be available for qualification work at that time. The demonstration program is scheduled to become operational in 1993 to support 1994 and future inspections

  5. Plasma in dentistry: a review of basic concepts and applications in dentistry.

    Science.gov (United States)

    Kim, Jae-Hoon; Lee, Mi-Ae; Han, Geum-Jun; Cho, Byeong-Hoon

    2014-01-01

    Plasma-related technologies are essential in modern industries. Recently, plasma has attracted increased attention in the biomedical field. This paper provides a basic knowledge of plasma and a narrative review of plasma applications in dentistry. To review plasma applications in dentistry, an electronic search in PubMed, SCOPUS and Google scholar up to December 2012 was done. This was followed by extensive hand searching using reference lists from relevant articles. There have been attempts to apply plasma technology in various fields of dentistry including surface modifications of dental implants, adhesion, caries treatment, endodontic treatment and tooth bleaching. Although many studies were in early stages, the potential value of plasma for dental applications has been demonstrated. To enlarge the scope of plasma applications and put relevant research to practical use, interdisciplinary research with participation of dental professionals is required.

  6. Interior design for dentistry.

    Science.gov (United States)

    Unthank, M; True, G

    1999-11-01

    In the increasingly complex, competitive and stressful field of dentistry, effectively designed dental offices can offer significant benefits. Esthetic, functional and life-cycle cost issues to be considered when developing your interior design scheme include color, finishes, lighting, furnishings, art and accessories. An appropriately designed dental office serves as a valuable marketing tool for your practice, as well as a safe and enjoyable work environment. Qualified interior design professionals can help you make design decisions that can yield optimum results within your budget.

  7. Magnets in dentistry

    Directory of Open Access Journals (Sweden)

    Vidya S Bhat

    2013-01-01

    Full Text Available Magnets have generated great interest within dentistry. They have been used for various applications in orthodontics and prosthodontics. Earlier use of magnets was limited due to the unavailability of small size magnets, but after the introduction of rare earth magnets and their availability in smaller sizes, their use has increased considerably. They can be placed within prostheses without being obtrusive in the mouth. Their main use in orthodontics has been for tooth movement and in prosthodontics has been in maxillofacial prosthesis and in overdentures as retentive aids. This article reviews the types of magnets available and their application in maxillofacial prosthesis and overdentures, followed by other advantages and disadvantages.

  8. Safety analysis report for packaging (onsite) transuranic performance demonstration program sample packaging

    International Nuclear Information System (INIS)

    Mccoy, J.C.

    1997-01-01

    The Transuranic Performance Demonstration Program (TPDP) sample packaging is used to transport highway route controlled quantities of weapons grade (WG) plutonium samples from the Plutonium Finishing Plant (PFP) to the Waste Receiving and Processing (WRAP) facility and back. The purpose of these shipments is to test the nondestructive assay equipment in the WRAP facility as part of the Nondestructive Waste Assay PDP. The PDP is part of the U. S. Department of Energy (DOE) National TRU Program managed by the U. S. Department of Energy, Carlsbad Area Office, Carlsbad, New Mexico. Details of this program are found in CAO-94-1045, Performance Demonstration Program Plan for Nondestructive Assay for the TRU Waste Characterization Program (CAO 1994); INEL-96/0129, Design of Benign Matrix Drums for the Non-Destructive Assay Performance Demonstration Program for the National TRU Program (INEL 1996a); and INEL-96/0245, Design of Phase 1 Radioactive Working Reference Materials for the Nondestructive Assay Performance Demonstration Program for the National TRU Program (INEL 1996b). Other program documentation is maintained by the national TRU program and each DOE site participating in the program. This safety analysis report for packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the TRU PDP sample packaging meets the onsite transportation safety requirements of WHC-CM-2-14, Hazardous Material Packaging and Shipping, for an onsite Transportation Hazard Indicator (THI) 2 packaging. This SARP, however, does not include evaluation of any operations within the PFP or WRAP facilities, including handling, maintenance, storage, or operating requirements, except as they apply directly to transportation between the gate of PFP and the gate of the WRAP facility. All other activities are subject to the requirements of the facility safety analysis reports (FSAR) of the PFP or WRAP facility and requirements of the PDP

  9. SELENIUM TREATMENT/REMOVAL ALTERNATIVES DEMONSTRATION PROJECT - MINE WASTE TECHNOLOGY PROGRAM ACTIVITY III, PROJECT 20

    Science.gov (United States)

    This document is the final report for EPA's Mine WAste Technology Program (MWTP) Activity III, Project 20--Selenium Treatment/Removal Alternatives Demonstration project. Selenium contamination originates from many sources including mining operations, mineral processing, abandoned...

  10. National fuel cell bus program : proterra fuel cell hybrid bus report, Columbia demonstration.

    Science.gov (United States)

    2011-10-01

    This report summarizes the experience and early results from a fuel cell bus demonstration funded by the Federal Transit Administration (FTA) under the National Fuel Cell Bus Program. A team led by the Center for Transportation and the Environment an...

  11. 20 CFR 416.250 - Experimental, pilot, and demonstration projects in the SSI program.

    Science.gov (United States)

    2010-04-01

    ... administration of the SSI program. These projects will test the advantages of altering certain requirements... demonstration project will have a termination date (up to 10 years from the start of the project). [48 FR 7576...

  12. Smart Columbus : Systems Engineering Management Plan (SEMP) for Smart Columbus Demonstration Program

    Science.gov (United States)

    2018-01-16

    The Smart City Demonstration Program is intended to improve access through expanded mobility options in major job centers, enhance visitor experience by better connecting visitors to transportation options, stimulate regional economic prosperity and ...

  13. Laser in dentistry: Biostimulation and surgery

    Science.gov (United States)

    Barzè, Franco; Palmieri, Beniamino; Scalise, Lorenzo; Rottigni, Valentina

    2012-09-01

    Laser therapy has achieved an important rule in cosmetic dentistry especially in the treatment of several complications such as leukoplakia, oral lichen planus, glossitis, oral mucositis, labial herpes virus, stomatitis, frenulum and oral hemangioma. In our study we enrolled 40 patients affected by these diseases to treat them with a new infrared dental laser demonstrating that it is extremely safe and effective in pain and postoperative discomforts reduction.

  14. Status of the tangentially fired LIMB Demonstration Program at Yorktown Unit No. 2: An update

    International Nuclear Information System (INIS)

    Clark, J.P.; Gogineni, M.R.; Koucky, R.W.; Gootzait, E.; Lachapelle, D.G.

    1992-01-01

    Combustion Engineering, Inc., under EPA sponsorship, is conducting a program to demonstrate furnace sorbent injection on a tangentially fired, coal-burning utility boiler, Virginia Power's 180 MW(e) Yorktown Unit No. 2. The overall objective of the program is to demonstrate significant reductions in sulfur dioxide (SO 2 ) and nitrogen oxides (NO x ) while minimizing any negative impacts on boiler performance. Engineering and procurement activities and baseline testing have been completed. Construction and installation of the sorbent injection and low-NO x equipment is nearly complete. An 8-month demonstration of furnace sorbent injection plus flue gas humidification will be conducted in 1992. Details of the sorbent injection concept to be tested at Yorktown, results of baseline testing, overall demonstration program organization and schedule, and preliminary plans for the 8-month demonstration test are discussed in the paper

  15. EVALUATION OF OXYGEN-ENRICHED MSW/SEWAGE SLUDGE CO-INCINERATION DEMONSTRATION PROGRAM

    Science.gov (United States)

    This report provides an evaluation of a two-phased demonstration program conducted for the U.S. Environmental Protection Agency's Municipal Solid Waste Innovative Technology Evaluation Program, and the results thereof, of a recently developed method of sewage sludge managemen...

  16. Departments of Social Dentistry--An Update for the 1980s.

    Science.gov (United States)

    Waldman, H. Barry; Siegal, Stanley E.

    1980-01-01

    A review of the development and present status of departments of social dentistry is provided, along with a discussion of evolving programs and need for a change in the relationship between departments of social dentistry and the general school teaching programs. (JSR)

  17. Japanese HTTR program for demonstration of high temperature applications of nuclear energy

    International Nuclear Information System (INIS)

    Nishihara, T.; Hada, K.; Shiozawa, S.

    1997-01-01

    Construction works of the HTTR started in March 1991 in order to establish and upgrade the HTGR technology basis, to carry out innovative basic researches on high temperature engineering and to demonstrate high temperature heat utilization and application of nuclear heat. This report describes the demonstration program of high temperature heat utilization and application. (author). 2 refs, 4 figs, 3 tabs

  18. The impact of managed care in dentistry.

    Science.gov (United States)

    Clouse, H R

    1999-01-01

    Managed care plans attempt to control health care expenditures aggressively. These plans directly influence access to medical care and the type, level, and frequency of care rendered. As a result, hospital stays are reduced, focus shifts from inpatient to outpatient care, and patients are responsible for a larger share of health care costs. Dentistry is not immune from the impact of managed care. The attractiveness of the dental market has drawn many managed care organizations, insurers, and entrepreneurs to encourage dentists to participate in a wide variety of managed care programs. However, the delivery of dental care differs markedly in many respects from that of medical care. Therefore, many of the cost saving aspects of managed care that have been so successful in medicine may not result in similar cost savings in dentistry.

  19. 76 FR 12073 - Extension of Web-Based TRICARE Assistance Program Demonstration Program

    Science.gov (United States)

    2011-03-04

    ... licensure (e.g., spouse abuse). Participant confidentiality is protected, as no medical record entry is made. Calls per month to the TRIAP line since the demonstration was extended and an aggressive marketing...

  20. Dentistry and criminal law.

    Science.gov (United States)

    Khoury, B S; Khoury, J N

    2017-09-01

    Criminal law in dentistry, as shaped and moulded by the prevailing views of society, defines what is or is not socially acceptable. It applies in both personal and professional contexts with the intended consequence of protecting the public from unacceptable conduct and potential imbalances of power. At its centre, a patient's consent plays a pivotal role in transforming unlawful conduct into lawful conduct. This literature review considers the current law and the trend of utilizing criminal law in addition to non-criminal law alternatives of reprimanding clinicians for failure to achieve consent in the course of dental practice. Dentists must appreciate this change and the prosecuting authority's increasing willingness to resort to criminal law. © 2017 Australian Dental Association.

  1. Ozone Therapy in Dentistry

    Science.gov (United States)

    Domb, William C

    2014-01-01

    Summary The 21st century dental practice is quite dynamic. New treatment protocols and new materials are being developed at a rapid pace. Ozone dental therapy falls into the category of new treatment protocols in dentistry, yet ozone is not new at all. Ozone therapy is already a major treatment modality in Europe, South America and a number of other countries. What is provided here will not be an exhaustive scientific treatise so much as a brief general introduction into what dentists are now doing with ozone therapies and the numerous oral/systemic links that make this subject so important for physicians so that, ultimately, they may serve their patients more effectively and productively. PMID:25363268

  2. New technologies in dentistry

    Science.gov (United States)

    Zanin, Fatima A. A.; Brugnera, Aldo, Jr.; Pecora, Jesus D.

    1999-05-01

    The technology in dentistry has been developed significantly lately, increasing the technological level of new materials, methods and equipment have been developed. Undoubtedly the CO2 laser has contributed to this evolution particular to the treatment of the infected dentin. CO2 laser can sterilize and promote increase 6 to 8 times of dentin resistance, through the transformation the hydroxyapatite in calcium-phosphato-hydroxyapatite. We can reassure our patients about the use of pulsed CO2 laser due to better preservation of dental structure and its benefits permitting advanced esthetic treatments. The CEREC system, registers a tri-dimensional image of the preparation through a scan system, and sends it to the computer and the operator will edit the restorations so the equipment will finish porcelain restoration. The authors used a new laser 650 nm for caries detection and the other low lever laser (670 nm and 730 nm) considered an auxiliary method to prevent and treat the hypersensitivity in dentin.

  3. Piezosurgery in implant dentistry

    Science.gov (United States)

    Stübinger, Stefan; Stricker, Andres; Berg, Britt-Isabelle

    2015-01-01

    Piezosurgery, or the use of piezoelectric devices, is being applied increasingly in oral and maxillofacial surgery. The main advantages of this technique are precise and selective cuttings, the avoidance of thermal damage, and the preservation of soft-tissue structures. Through the application of piezoelectric surgery, implant-site preparation, bone grafting, sinus-floor elevation, edentulous ridge splitting or the lateralization of the inferior alveolar nerve are very technically feasible. This clinical overview gives a short summary of the current literature and outlines the advantages and disadvantages of piezoelectric bone surgery in implant dentistry. Overall, piezoelectric surgery is superior to other methods that utilize mechanical instruments. Handling of delicate or compromised hard- and soft-tissue conditions can be performed with less risk for the patient. With respect to current and future innovative surgical concepts, piezoelectric surgery offers a wide range of new possibilities to perform customized and minimally invasive osteotomies. PMID:26635486

  4. Laser safety in dentistry

    Science.gov (United States)

    Wigdor, Harvey A.

    1997-05-01

    One of the major causes of anxiety in the dental clinic is the dental handpiece. Because dentists wish to provide a method which can replace the drill there has often been a premature use of the laser in dentistry. Various lasers have been introduced into the clinic before research has shown the laser used is of clinical benefit. Any new treatment method must not compromise the health of the patient being treated. Thus a method of evaluating the clinical abilities of dentists and their understanding the limitations of the laser used must be developed. Dentist must be trained in the basic interaction of the laser on oral tissues. The training has to concentrate on the variation of the laser wavelength absorption in the different tissues of the oral cavity. Because of the differences in the optical properties of these tissues great care must be exercised by practitioners using lasers on patients.

  5. Reframing in dentistry: Revisited

    Directory of Open Access Journals (Sweden)

    Sivakumar Nuvvula

    2013-01-01

    Full Text Available The successful practice of dentistry involves a good combination of technical skills and soft skills. Soft skills or communication skills are not taught extensively in dental schools and it can be challenging to learn and at times in treating dental patients. Guiding the child′s behavior in the dental operatory is one of the preliminary steps to be taken by the pediatric dentist and one who can successfully modify the behavior can definitely pave the way for a life time comprehensive oral care. This article is an attempt to revisit a simple behavior guidance technique, reframing and explain the possible psychological perspectives behind it for better use in the clinical practice.

  6. [Research Progress on Forensic Dentistry].

    Science.gov (United States)

    Liu, F; Dang, Y H

    2017-04-01

    Forensic dentistry is an interdiscipline of forensic medicine and stomatology, which provides legal information by collecting, testing and assessing the dental evidence scientifically. In this review, the present application of forensic dentistry has been described, such as the estimation of age, sex, species, occupation and living habit, as well as the identification of individual, domestic violence or abuse, which aims to enrich and improve forensic dentistry for making it be more useful in forensic medicine even in juridical practice. Copyright© by the Editorial Department of Journal of Forensic Medicine.

  7. Advancing the US Department of Energy's Technologies through the Underground Storage Tank: Integrated Demonstration Program

    International Nuclear Information System (INIS)

    Gates, T.E.

    1993-01-01

    The principal objective of the Underground Storage Tank -- Integrated Demonstration Program is the demonstration and continued development of technologies suitable for the remediation of waste stored in underground storage tanks. The Underground Storage Tank Integrated Demonstration Program is the most complex of the integrated demonstration programs established under the management of the Office of Technology Development. The Program has the following five participating sites: Oak Ridge, Idaho, Fernald, Savannah River, and Hanford. Activities included within the Underground Storage Tank -- Integrated Demonstration are (1) characterizating radioactive and hazardous waste constituents, (2) determining the need and methodology for improving the stability of the waste form, (3) determining the performance requirements, (4) demonstrating barrier performance by instrumented field tests, natural analog studies, and modeling, (5) determining the need and method for destroying and stabilizing hazardous waste constituents, (6) developing and evaluating methods for retrieving, processing (pretreatment and treatment), and storing the waste on an interim basis, and (7) defining and evaluating waste packages, transportation options, and ultimate closure techniques including site restoration. The eventual objective is the transfer of new technologies as a system to full-scale remediation at the US Department of Energy complexes and sites in the private sector

  8. Waste immobilization demonstration program for the Hanford Site's Mixed Waste Facility

    International Nuclear Information System (INIS)

    Burbank, D.A.; Weingardt, K.M.

    1994-05-01

    This paper presents an overview of the Waste Receiving and Processing facility, Module 2A> waste immobilization demonstration program, focusing on the cooperation between Hanford Site, commercial, and international participants. Important highlights of the development and demonstration activities is discussed from the standpoint of findings that have had significant from the standpoint of findings that have had significant impact on the evolution of the facility design. A brief description of the future direction of the program is presented, with emphasis on the key aspects of the technologies that call for further detailed investigation

  9. Status of the Virginia Power/DOE Cooperative Cask Testing/Demonstration Program: A video presentation

    International Nuclear Information System (INIS)

    McKinnon, M.A.; Creer, J.M.; Collantes, C.E.

    1990-01-01

    This paper is documentation of a video presentation and provides a brief summary of the Virginia power/US Department of Energy Cooperative Cask Testing/Demonstration Program. The program consists of two phases. The first phase has been completed and involved the unlicensed performance testing (heat transfer and shielding) of three metal spent fuel storage casks at the federally owned Idaho National Engineering Laboratory. The second phase is ongoing and consists of licensed demonstrations of standard casks from two different vendors and of one or two enhanced capacity casks. 6 refs., 1 tab

  10. JOYO modification program for demonstration tests of FBR innovative technology development

    International Nuclear Information System (INIS)

    Yoshimi, H.; Hachiya, Y.

    1990-01-01

    A plan is under way at PNC to modify the experimental fast reactor JOYO. The project is called MARK-III (MK-III) program. The purpose of MK-III is to expand the function of JOYO, and to make it possible to receive demonstration tests of new or high level technologies for FBR development. The MK-III program consists of two main modifications: conversion to a highly efficient irradiation facility; and a modification for demonstration testing of new technologies and concepts that have a high potential to reduce FBR plant construction cost, to evaluate plant reliability and to improve plant safety. These modifications are scheduled to start in 1991

  11. Office of Technology Development Program for Research, Development, Demonstration, Testing, and Evaluation. FY 1993 Program Summary

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    DOE has set a goal to clean up its complex and to bring all sites into compliance with applicable environmental regulations. This initiative is slated for completion by the year 2019. Four years ago there was no coordinated plan for identifying or cleaning these contaminated sites. Since 1989, DOE`s Office of Environmental Restoration and Waste Management has invested time, money, and manpower to establish a wide range of programs to meet this immense challenge. DOE is responsible for waste management and clean up of more than 100 contaminated installations in 36 states and territories. This includes 3,700 sites: over 26,000 acres, with hazardous or radioactive contaminated surface or groundwater, soil, or structures; over 26,000 acres requiring remediation, with the number growing as new sites are defined; 500 surplus facilities awaiting decontamination and decommissioning and approximately 5,000 peripheral properties (residences, businesses) that have soil contaminated with uranium tailings.

  12. Evidence-based dentistry.

    Science.gov (United States)

    Chambers, David W

    2010-01-01

    Both panegyric and criticism of evidence-based dentistry tend to be clumsy because the concept is poorly defined. This analysis identifies several contributions to the profession that have been made under the EBD banner. Although the concept of clinicians integrating clinical epidemiology, the wisdom of their practices, and patients' values is powerful, its implementation has been distorted by a too heavy emphasis of computerized searches for research findings that meet the standards of academics. Although EBD advocates enjoy sharing anecdotal accounts of mistakes others have made, faulting others is not proof that one's own position is correct. There is no systematic, high-quality evidence that EBD is effective. The metaphor of a three-legged stool (evidence, experience, values, and integration) is used as an organizing principle. "Best evidence" has become a preoccupation among EBD enthusiasts. That overlong but thinly developed leg of the stool is critiqued from the perspectives of the criteria for evidence, the difference between internal and external validity, the relationship between evidence and decision making, the ambiguous meaning of "best," and the role of reasonable doubt. The strongest leg of the stool is clinical experience. Although bias exists in all observations (including searches for evidence), there are simple procedures that can be employed in practice to increase useful and objective evidence there, and there are dangers in delegating policy regarding allowable treatments to external groups. Patient and practitioner values are the shortest leg of the stool. As they are so little recognized, their integration in EBD is problematic and ethical tensions exist where paternalism privileges science over patient's self-determined best interests. Four potential approaches to integration are suggested, recognizing that there is virtually no literature on how the "seat" of the three-legged stool works or should work. It is likely that most dentists

  13. A summary of the environmental restoration program retrieval demonstration project at the Idaho National Engineering Laboratory

    International Nuclear Information System (INIS)

    McQuary, J.

    1991-02-01

    This report provides a summary of the Environmental Restoration Program's Retrieval Demonstration Project at the Idaho National Engineering Laboratory. This project developed concepts for demonstrating facilities and equipment for the retrieval of buried transuranic mixed waste at the INEL. Included is a brief assessment of the viability, cost effectiveness, and safety of retrieval based on the developed concept. Changes made in Revision 1 reflect editorial changes only. 31 refs., 1 fig

  14. Electric and hybrid vehicle self-certification and verification procedures: Market Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-03-01

    The process by which a manufacturer of an electric or hybrid vehicle certifies that his vehicle meets the DOE Performance Standards for Demonstration is described. Such certification is required for any vehicles to be purchased under the Market Demonstration Program. It also explains the verification testing process followed by DOE for testing to verify compliance. Finally, the document outlines manufacturer responsibilities and presents procedures for recertification of vehicles that have failed verification testing.

  15. Regulatory requirements of the integrated technology demonstration program, Savannah River Site (U)

    International Nuclear Information System (INIS)

    Bergren, C.L.

    1992-01-01

    The integrated demonstration program at the Savannah River Site (SRS) involves demonstration, testing and evaluation of new characterization, monitoring, drilling and remediation technologies for soils and groundwater impacted by organic solvent contamination. The regulatory success of the demonstration program has developed as a result of open communications between the regulators and the technical teams involved. This open dialogue is an attempt to allow timely completion of applied environmental restoration demonstrations while meeting all applicable regulatory requirements. Simultaneous processing of multiple regulatory documents (satisfying RCRA, CERCLA, NEPA and various state regulations) has streamlined the overall permitting process. Public involvement is achieved as various regulatory documents are advertised for public comment consistent with the site's community relations plan. The SRS integrated demonstration has been permitted and endorsed by regulatory agencies, including the Environmental Protection Agency (EPA) and the South Carolina Department of Health and Environmental Control. EPA headquarters and regional offices are involved in DOE's integrated Demonstration Program. This relationship allows for rapid regulatory acceptance while reducing federal funding and time requirements. (author)

  16. Piezosurgery in implant dentistry

    Directory of Open Access Journals (Sweden)

    Stübinger S

    2015-11-01

    Full Text Available Stefan Stübinger,1 Andres Stricker,2 Britt-Isabelle Berg3,4 1Hightech Research Center of Cranio-maxillofacial Surgery, University of Basel, Allschwil, Switzerland; 2Private Practice, Konstanz, Germany; 3Department of Cranio-maxillofacial Surgery, University Hospital Basel, Basel, Switzerland; 4Division of Oral and Maxillofacial Radiology, Columbia University Medical Center, New York, NY, USA Abstract: Piezosurgery, or the use of piezoelectric devices, is being applied increasingly in oral and maxillofacial surgery. The main advantages of this technique are precise and selective cuttings, the avoidance of thermal damage, and the preservation of soft-tissue structures. Through the application of piezoelectric surgery, implant-site preparation, bone grafting, sinus-floor elevation, edentulous ridge splitting or the lateralization of the inferior alveolar nerve are very technically feasible. This clinical overview gives a short summary of the current literature and outlines the advantages and disadvantages of piezoelectric bone surgery in implant dentistry. Overall, piezoelectric surgery is superior to other methods that utilize mechanical instruments. Handling of delicate or compromised hard- and soft-tissue conditions can be performed with less risk for the patient. With respect to current and future innovative surgical concepts, piezoelectric surgery offers a wide range of new possibilities to perform customized and minimally invasive osteotomies. Keywords: implantology, piezoelectric device, piezosurgery, maxillary sinus elevation, bone grafting, osteotomy, edentulous ridge splitting

  17. Protection of patients in dentistry

    International Nuclear Information System (INIS)

    Selato Selato, P.

    2013-04-01

    Current literature on dental radiology was reviewed in order to seek justification for radiological protection of patients in dental radiography, to explore the different factors affecting patient dose and to derive practical guidance on how to achieve radiological protection of patients in dentistry. Individual doses incurred in dental radiology are in general relatively low, however it is generally accepted that there is no safe level of radiation dose and that no matter how low the doses received are, there is a mathematical probability of an effect. Hence appropriate patient protection measures must be instituted to keep the exposures as low as reasonably achievable (ALARA). The literature review demonstrated that there is considerable scope for significant dose reductions in dental radiology using the techniques of optimisation of protection. The techniques of optimization of protection that can be used to ensure patient dose is as low as reasonably achievable whilst achieving clinically adequate image quality include the following: image receptor selection, image receptor holders, collimation, beam filtration, operating potential and exposure time, patient protective equipment, film exposure and processing, film storage, image viewing, quality assurance, diagnostic reference levels, technique charts and training and education.(au)

  18. A Comparison of Types of Robot Control for Programming by Demonstration

    DEFF Research Database (Denmark)

    Fischer, Kerstin; Kirstein, Franziska; Jensen, Lars Christian

    2016-01-01

    Programming by Demonstration (PbD) is an efficient way for non-experts to teach new skills to a robot. PbD can be carried out in different ways, for instance, by kinesthetic guidance, teleoperation or by using external controls. In this paper, we compare these three ways of controlling a robot in...

  19. 75 FR 56946 - Medicaid Program; Review and Approval Process for Section 1115 Demonstrations

    Science.gov (United States)

    2010-09-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Medicare & Medicaid Services 42 CFR Part 431 [CMS-2325-P] RIN 0938-AQ46 Medicaid Program; Review and Approval Process for Section 1115 Demonstrations AGENCY: Centers for Medicare & Medicaid Services (CMS), HHS. ACTION: Proposed rule. SUMMARY: This...

  20. Demonstrating the value of a social science research program to a natural resource management agency

    Science.gov (United States)

    Pamela J. Jakes; John F. Dwyer; Deborah S. Carr

    1998-01-01

    With ever tightening resources to address an increased number of diverse and complex issues, it has become common for scientists and managers to be called upon to demonstrate the value of their programs. In the spring of 1995, social scientists at the USDA Forest Service North Central Forest Experiment Station we so called upon. This paper discusses an effort to...

  1. Competing definitions: a public policy analysis of the federal recreational fee demonstration program

    Science.gov (United States)

    Thomas A. E. More

    2003-01-01

    Problem definition theory specifies that however controls the definition of a problem is in a unique position to control debate over the issue, influence others, and determine the problem's place on the agenda. This paper uses a rhetorical analysis and a questionnaire survey of congressional aides to examine the federal Recreational Fee Demonstration Program....

  2. Evaluation of a rural demonstration program to increase seat belt use in the Great Lakes Region.

    Science.gov (United States)

    2009-03-01

    Six States in the Great Lakes Region (Region 5) participated in a Rural Demonstration Program to increase seat belt : use in rural areas and among high-risk occupants, such as young males and occupants of pickup trucks. These : efforts, which include...

  3. Environment, Safety, Health, and Quality Plan for the Buried Waste Integrated Demonstration Program

    International Nuclear Information System (INIS)

    Walker, S.

    1994-05-01

    The Buried Waste Integrated Demonstration (BWID) is a program funded by the US Department of Energy Office of Technology Development. BWID supports the applied research, development, demonstration, testing, and evaluation of a suite of advanced technologies that together form a comprehensive remediation system for the effective and efficient remediation of buried waste. This document describes the Environment, Safety, Health, and Quality requirements for conducting BWID activities at the Idaho National Engineering Laboratory. Topics discussed in this report, as they apply to BWID operations, include Federal, State of Idaho, and Environmental Protection Agency regulations, Health and Safety Plans, Quality Program Plans, Data Quality Objectives, and training and job hazard analysis. Finally, a discussion is given on CERCLA criteria and System and Performance audits as they apply to the BWID Program

  4. Intertechnology Corporation proposed test and evaluation plan, commercial buildings. National Solar Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-09-01

    This report has three major parts. The first of these derives the requirements for the Test and Evaluation plan from the System Level Plan which is summarized in Section II. The second part contains the proposed plan to fill these requirements and includes hardware and software recommendations as well as procedures and management considerations. Primary emphasis has been given to the remote site because this is the area in which the commercial part of the demonstration is most unique. Finally, some pre-demonstration activities are described. The pilot program is intended to resolve a number of issues which arose in the course of the T and E plan. These relate to choice of scan frequencies, compression algorithms, etc. It is also intended to confirm performance and cost effectiveness of the site data collection package. The base line measurements of attitudes, etc. provide a reference mark against which one can measure the non-technical effectiveness of the demonstration program. (WDM)

  5. Broadband demonstrations of true-time delay using linear sideband chirped programming and optical coherent transients

    International Nuclear Information System (INIS)

    Reibel, R.R.; Barber, Z.W.; Fischer, J.A.; Tian, M.; Babbitt, W.R.

    2004-01-01

    Linear sideband chirped (LSC) programming is introduced as a means of configuring spatial-spectral holographic gratings for optical coherent transient processors. Similar to linear frequency chirped programming, LSC programming allows the use of broadband integrated electro-optic phase modulators to produce chirps instead of using elaborate broadband chirped lasers. This approach has several advantages including the ability to use a stabilized laser for the optical carrier as well as stable, reproducible chirped optical signals when the modulator is driven digitally. Using LSC programming, we experimentally demonstrate broadband true-time delay as a proof of principle for the optical control of phased array radars. Here both cw phase modulated and binary phase shift keyed probe signals are true-time delayed with bandwidths of 1 GHz and delay resolutions better than 60 ps

  6. Hydrocarbon upgrading demonstration program (HUDP): an investment in the future of the oil sands

    Energy Technology Data Exchange (ETDEWEB)

    Du Plessis, Duke; Isaacs, Eddy [AI-EES (Canada); Hill, Rich; McPhee, Anne; Keesom, Bill; Arnold, Ed [Jacobs Consultancy (Canada)

    2011-07-01

    Alberta Innovates Energy and Environment Solutions (AIEES), the technology arm of the Alberta Government in terms of energy and the environment, has initiated the hydrocarbon upgrading demonstration program (HUDP). Since lighter products have a better market value, this program aims to develop technologies for upgrading heavy oil into light, transportable fuel. The program also aims to improve SAGD efficiency while reducing greenhouse gas emissions. To do so, the gaps between typical and ideal operations were identified and quantified, life cycle analyses were performed, current studies were reviewed and future issues and opportunities were assessed. With the HUDP program, AIEES is supporting the industry through investment and technology support to develop innovative technologies which will improve margins and the sustainability of oil sands operations.

  7. Radiological protection in dentistry

    Energy Technology Data Exchange (ETDEWEB)

    Holliday, B

    1974-01-01

    Information that would allow an assessment of the standard of radiological protection in dentistry in the United Kingdom is sparse. The National Radiological Protection Board (previously the Radiological Protection Service) has provided a monitoring and advisory service to dentists for many years but very limited use has been made of this service. In a recent survey, 114 dentists were visited in representative practices in South East England and it was established that only 6.5% of dentists in general practice do not use radiography as an adjunct to their practice (Smith, 1969). In the 88 x-ray sets which were examined, 24% had less than the recommended thickness of aluminium filtration, while 25% had a fixed field size which was larger than necessary for dental radiography; in addition, 27% of the timers were found to have an error of greater than 20% in repetition of the pre-set exposure time. The exposure rate at the cone tip of a dental x-ray unit is generally in the range 1 to 4 R/s. A fault in the timer unit coupled with a failure on the part of the dentist to notice that x-rays are being generated (normally indicated by a red warning light) would rapidly lead to excessive exposure of the patient. Furthermore, a dentist continually holding films in the mouth of his patient would certainly incur a dose well in excess of the permissible hand dose, assuming anaverage work load for the x-ray equipment. Three case histories are given to illustrate the type of hazard that might arise from faulty equipment or bad operating technique.

  8. DOE's Innovative Treatment Remediation Demonstration Program accelerating the implementation of innovative technologies

    International Nuclear Information System (INIS)

    Hightower, M.

    1995-01-01

    A program to help accelerate the adoption and implementation of new and innovative remediation technologies has been initiated by the Department of Energy's (DOE) Environmental Restoration Program Office (EM40). Developed as a Public-Private Partnership program in cooperation with the US Environmental Protection Agency's (EPA) Technology Innovation Office (TIO) and coordinated by Sandia National Laboratories, the Innovative Treatment Remediation Demonstration (ITRD) Program attempts to reduce many of the classic barriers to the use of new technologies by involving government, industry, and regulatory agencies in the assessment, implementation, and validation of innovative technologies. In this program, DOE facilities work cooperatively with EPA, industry, national laboratories, and state and federal regulatory agencies to establish remediation demonstrations using applicable innovative technologies at their sites. Selected innovative technologies are used to remediate small, one to two acre, sites to generate the full-scale and real-world operating, treatment performance, and cost data needed to validate these technologies and gain acceptance by industry and regulatory agencies, thus accelerating their use nationwide. Each ITRD project developed at a DOE site is designed to address a typical soil or groundwater contamination issue facing both DOE and industry. This includes sites with volatile organic compound (VOC), semi-VOC, heavy metal, explosive residue, and complex or multiple constituent contamination. Projects are presently underway at three DOE facilities, while additional projects are under consideration for initiation in FY96 at several additional DOE sites. A brief overview of the ITRD Program, program plans, and the status and progress of existing ITRD projects are reviewed in this paper

  9. VANTAGE 5 PWR fuel assembly demonstration program at Virgil C. Summer nuclear station

    International Nuclear Information System (INIS)

    Warner, D.C.; Orr, W.L.

    1985-01-01

    VANTAGE 5 is an improved PWR fuel product designed and manufactured by Westinghouse Electric Corporation. The VANTAGE 5 fuel design features integral fuel burnable absorbers, intermediate flow mixer grids, axial blankets, high burnup capability, and a reconstitutable top nozzle. A demonstration program for this fuel design commenced in late 1984 in cycle 2 of the Virgil C. Summer Nuclear Station. Objectives for VANTAGE 5 fuel are reduced fuel cycle costs, better core operating margins, and increased design and operating flexibility. Inspections of the VANTAGE 5 demonstration assemblies are planned at each refueling outage

  10. Rio Grande Erosion Potential Demonstration - Report for the National Border Technology Program; TOPICAL

    International Nuclear Information System (INIS)

    JEPSEN, RICHARD A.; ROBERTS, JESSE D.; LANGFORD, RICHARD; GAILANI, JOSEPH

    2001-01-01

    This demonstration project is a collaboration among DOE, Sandia National Laboratories, the University of Texas, El Paso (UTEP), the International Boundary and Water Commission (IBWC), and the US Army Corps of Engineers (USACE). Sandia deployed and demonstrated a field measurement technology that enables the determination of erosion and transport potential of sediments in the Rio Grande. The technology deployed was the Mobile High Shear Stress Flume. This unique device was developed by Sandia's Carlsbad Programs for the USACE and has been used extensively in collaborative efforts on near shore and river systems throughout the United States. Since surface water quantity and quality along with human health is an important part of the National Border Technology Program, technologies that aid in characterizing, managing, and protecting this valuable resource from possible contamination sources is imperative

  11. Early Site Permit Demonstration Program: Plant parameters envelope report. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    The Early Site Permit (ESP) Demonstration Program is the nuclear industry`s initiative for piloting the early resolution of siting-related issues before the detailed design proceedings of the combined operating license review. The ESP Demonstration Program consists of three phases. The plant parameters envelopes task is part of Phase 1, which addresses the generic review of applicable federal regulations and develops criteria for safety and environmental assessment of potential sites. The plant parameters envelopes identify parameters that characterize the interface between an ALWR design and a potential site, and quantify the interface through values selected from the Utility Requirements Documents, vendor design information, or engineering assessments. When augmented with site-specific information, the plant parameters envelopes provide sufficient information to allow ESPs to be granted based on individual ALWR design information or enveloping design information for the evolutionary, passive, or generic ALWR plants. This document is expected to become a living document when used by future applicants.

  12. Current Concepts in Restorative Implant Dentistry

    Institute of Scientific and Technical Information of China (English)

    Prof.Marchack

    2009-01-01

    Patients today are incteasingly aware of dental implants.and their expectations are for esthetically and functionally pleasingimplant restorations that mimic natural teeth.This presentation will give both the experienced and novice practitioner a better understand-ing of how restorative implant dentistry has evolved.Treatment planning and restorative options for single implants.multiple implants andfully edentulons arches will be discussed,and the use of modern materials and CADCAM technology in fabricating the most contemporaryfixed implant supported prostheses will be demonstrated.

  13. A Demonstration of Evidence-Based Action Research Using Information Dashboard in Introductory Programming Education

    OpenAIRE

    Matsuzawa , Yoshiaki; Tanaka , Yoshiki; Kitani , Tomoya; Sakai , Sanshiro

    2017-01-01

    Part 3: Computer Science Education and Its Future Focus and Development; International audience; In this paper, we demonstrated an evidence-based action research in an introductory programming class with the use of an information dashboard which provides coding metrics to visualize students’ engagement of their assignments. The information dashboard was designed for teachers to improve their classroom teaching using the same coding metrics which was verified in our previous research [9]. The ...

  14. City of Las Vegas Plug-in Hybrid Electric Vehicle Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-12-31

    The City of Las Vegas was awarded Department of Energy (DOE) project funding in 2009, for the City of Las Vegas Plug-in Hybrid Electric Vehicle Demonstration Program. This project allowed the City of Las Vegas to purchase electric and plug-in hybrid electric vehicles and associated electric vehicle charging infrastructure. The City anticipated the electric vehicles having lower overall operating costs and emissions similar to traditional and hybrid vehicles.

  15. Demonstration of an Integrated Pest Management Program for Wheat in Tajikistan

    OpenAIRE

    Landis, Douglas A.; Saidov, Nurali; Jaliov, Anvar; El Bouhssini, Mustapha; Kennelly, Megan; Bahlai, Christie; Landis, Joy N.; Maredia, Karim

    2016-01-01

    Wheat is an important food security crop in central Asia but frequently suffers severe damage and yield losses from insect pests, pathogens, and weeds. With funding from the United States Agency for International Development, a team of scientists from three U.S. land-grant universities in collaboration with the International Center for Agricultural Research in Dry Areas and local institutions implemented an integrated pest management (IPM) demonstration program in three regions of Tajikistan ...

  16. Developing patient safety in dentistry.

    Science.gov (United States)

    Pemberton, M N

    2014-10-01

    Patient safety has always been important and is a source of public concern. Recent high profile scandals and subsequent reports, such as the Francis report into the failings at Mid Staffordshire, have raised those concerns even higher. Mortality and significant morbidity associated with the practice of medicine has led to many strategies to help improve patient safety, however, with its lack of associated mortality and lower associated morbidity, dentistry has been slower at systematically considering how patient safety can be improved. Recently, several organisations, researchers and clinicians have discussed the need for a patient safety culture in dentistry. Strategies are available to help improve patient safety in healthcare and deserve further consideration in dentistry.

  17. What's new in paediatric dentistry?

    Science.gov (United States)

    Vitale, M. C.

    2016-03-01

    Since the early 80's, the use of laser has been introduced in the daily dental practice and the technological development has also provided over time to optimize its use. Various types of lasers with different wavelengths have been developed for use in a handy, easy and ergonomic manner. In daily paediatric dentistry, laser could be a very useful medical device which can completely replace the traditional high hand-piece and bur to realize a "micro-invasive" dentistry and a "clean" surgery, without bleeding and sutures. According to the international literature and in the light of recent researches, this work could give an overview on assisted laser therapy in paediatric dentistry, highlighting advantages and disadvantages of this new technology and pointing out the high compliance of the young patient.

  18. 3D printing in dentistry.

    Science.gov (United States)

    Dawood, A; Marti Marti, B; Sauret-Jackson, V; Darwood, A

    2015-12-01

    3D printing has been hailed as a disruptive technology which will change manufacturing. Used in aerospace, defence, art and design, 3D printing is becoming a subject of great interest in surgery. The technology has a particular resonance with dentistry, and with advances in 3D imaging and modelling technologies such as cone beam computed tomography and intraoral scanning, and with the relatively long history of the use of CAD CAM technologies in dentistry, it will become of increasing importance. Uses of 3D printing include the production of drill guides for dental implants, the production of physical models for prosthodontics, orthodontics and surgery, the manufacture of dental, craniomaxillofacial and orthopaedic implants, and the fabrication of copings and frameworks for implant and dental restorations. This paper reviews the types of 3D printing technologies available and their various applications in dentistry and in maxillofacial surgery.

  19. Implementation status of performance demonstration program for steam generator tubing analysts in Korea

    International Nuclear Information System (INIS)

    Cho, Chan Hee; Lee, Hee Jong; Yoo, Hyun Ju; Nam, Min Woo; Hong, Sung Yull

    2013-01-01

    Some essential components in nuclear power plants are periodically inspected using non destructive examinations, for example ultrasonic, eddy current and radiographic examinations, in order to determine their integrity. These components include nuclear power plant items such as vessels, containments, piping systems, pumps, valves, tubes and core support structure. Steam generator tubes have an important safety role because they constitute one of the primary barriers between the radioactive and non radioactive sides of the nuclear power plant. There is potential that if a tube bursts while a plant is operating, radioactivity from the primary coolant system could escape directly to the atmosphere. Therefore, in service inspections are critical in maintaining steam generator tube integrity. In general, the eddy current testing is widely used for the inspection of steam generator tubes due tube integrity. In general, the eddy current testing is widely used for the inspection of steam generator tubes due to its high inspection speed and flaw detectability on non magnetic tubes. However, it is not easy to analyze correctly eddy current signals because they are influenced by many factors. Therefore, the performance of eddy current data analysts for steam generator tubing should be demonstrated comprehensively. In Korea, the performance of steam generator tubing analysts has been demonstrated using the Qualified Data Analyst program. This paper describes the performance demonstration program for steam generator tubing analysts and its implementation results in Korea. The pass rate of domestic analysts for this program was 71.4%

  20. Hazardous Waste Development, Demonstration, and Disposal (HAZWDDD) program plan: Executive summary

    International Nuclear Information System (INIS)

    McGinnis, C.P.; Eisenhower, B.M.; Reeves, M.E.; DePaoli, S.M.; Stinton, L.H.; Harrington, E.H.

    1989-02-01

    The Hazardous Waste Development, Demonstration, and Disposal (HAZWDDD) Program Plan provides a strategy for management of hazardous and mixed wastes generated by the five Department of Energy (DOE) installations managed by Martin Marietta Energy Systems, Inc. (Energy Systems). This integrated corporate plan is based on the individual installation plans, which identify waste streams, facility capabilities, problem wastes, future needs, and funding needs. Using this information, the corporate plan identifies common concerns and technology/facility needs over the next 10 years. The overall objective of this corporate plan is to ensure that treatment, storage, and disposal (TSD) needs for all hazardous and mixed wastes generated by Energy Systems installations have been identified and planned for. Specific objectives of the program plan are to (1) identify all hazardous and mixed waste streams; (2) identify hazardous and mixed waste TSD requirements; (3) identify any unresolved technical issues preventing implementation of the strategy; (4) develop schedules for studies, demonstrations, and facilities to resolve the issues; and (5) define the interfaces with the Low-Level Waste Disposal Development and Demonstration (LLWDDD) Program. 10 refs., 7 figs

  1. Implementation status of performance demonstration program for steam generator tubing analysts in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Chan Hee; Lee, Hee Jong; Yoo, Hyun Ju; Nam, Min Woo [KHNP Central Research Institute, Daejeon (Korea, Republic of); Hong, Sung Yull [Yeungnam Univ., Gyeongsan (Korea, Republic of)

    2013-02-15

    Some essential components in nuclear power plants are periodically inspected using non destructive examinations, for example ultrasonic, eddy current and radiographic examinations, in order to determine their integrity. These components include nuclear power plant items such as vessels, containments, piping systems, pumps, valves, tubes and core support structure. Steam generator tubes have an important safety role because they constitute one of the primary barriers between the radioactive and non radioactive sides of the nuclear power plant. There is potential that if a tube bursts while a plant is operating, radioactivity from the primary coolant system could escape directly to the atmosphere. Therefore, in service inspections are critical in maintaining steam generator tube integrity. In general, the eddy current testing is widely used for the inspection of steam generator tubes due tube integrity. In general, the eddy current testing is widely used for the inspection of steam generator tubes due to its high inspection speed and flaw detectability on non magnetic tubes. However, it is not easy to analyze correctly eddy current signals because they are influenced by many factors. Therefore, the performance of eddy current data analysts for steam generator tubing should be demonstrated comprehensively. In Korea, the performance of steam generator tubing analysts has been demonstrated using the Qualified Data Analyst program. This paper describes the performance demonstration program for steam generator tubing analysts and its implementation results in Korea. The pass rate of domestic analysts for this program was 71.4%.

  2. Industrial Fuel Gas Demonstration Plant Program. Task III, Demonstration plant safety, industrial hygiene, and major disaster plan (Deliverable No. 35)

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-03-01

    This Health and Safety Plan has been adopted by the IFG Demonstration Plant managed by Memphis Light, Gas and Water at Memphis, Tennessee. The plan encompasses the following areas of concern: Safety Plan Administration, Industrial Health, Industrial Safety, First Aid, Fire Protection (including fire prevention and control), and Control of Safety Related Losses. The primary objective of this plan is to achieve adequate control of all potentially hazardous activities to assure the health and safety of all employees and eliminate lost work time to both the employees and the company. The second objective is to achieve compliance with all Federal, state and local laws, regulations and codes. Some thirty specific safe practice instruction items are included.

  3. Program management plan for the conduct of a research, development, and demonstration program for improving the safety of nuclear powerplants

    International Nuclear Information System (INIS)

    1981-12-01

    Congress passed Public Law 96-567, Nuclear Safety Research, Development, and Demonstration Act of 1980, (hereafter referred to as the Act) to provide for an accelerated and coordinated program of light water reactor safety research, development, and demonstration to be carried out by the Department of Energy. In order to assure that this program would be compatible with the needs of Nuclear Regulatory Commission (NRC) and industry, the Department of Energy (DOE) initiated its response to Section 4 of the Act by conducting individual information gathering meetings with NRC and a wide cross section of the nuclear industry. The Department received recommendations on needs of what type of activities would and would not be appropriate for the Department to assist in satisfying these needs. Based on the evaluation of these inputs, it is concluded that the Department's ongoing Light Water Reactor (LWR) safety program is responsive to the Act. Specifically, the Department's ongoing program includes tasks in the areas of regulatory assessment, risk assessment, fission product source term, and emergency preparedness as well as providing technical assistance to the Institute of Nuclear Power Operations (INPO) to improve training of nuclear power personnel. These were among the very high priority efforts that were identified as necessary and appropriate for support by the Department

  4. Straightforward Case of Dental Implant in General Dentistry

    Directory of Open Access Journals (Sweden)

    Aji P. Tjikman

    2013-07-01

    Full Text Available Dental implant has become a fast developing and dynamic field in dental practice. It is acknowledged as a predictable treatment modality with high clinical success rates. Conventional fixed prostheses are no longer considered to be the first choice of treatment for replacing a missing tooth. Despite the increasing number of patients requesting dental implant treatments, there are only some clinicians who are offering implant therapy in their daily practice. The International team for Implantology described a straightforward case as a simple case such as implant placements in adquate soft and hard tissue conditions and single-tooth restorations in a non-aesthetic zone. A review of the current literature discussed the implementation of implant dentistry in universities worldwide into their curriculum for both undergraduate and postgraduate programs in general dentistry. The European consensus in implant dentistry education concluded that it is desirable to include the surgical technique for implant placement for straightforward cases into the dental curriculum. The levels and limitations to which the various aspects of implant dentistry and related skills are taught to be determined by the academic community. This review aimed at promoting awareness amongst dental practitioners and institutions in Indonesia of the shifting treatment paradigm in the maangement of a missing tooth. Hence clinicians will be able to include implant dentistry in the treatment planning of their patients and also undertake a significant part in the execution of such treatments.

  5. 1982 environmental-monitoring program report for the West Valley Demonstration Project site

    International Nuclear Information System (INIS)

    1983-05-01

    This report is prepared and submitted in accordance with the requirements of DOE Order 5484.1 and presents environmental monitoring program data collected at the West Valley Demonstration Project (WVDP) site from February 26, 1982, through December 31, 1982. The WVDP objective is to solidify approximately 600,000 gallons of high-level liquid radioactive waste stored at the former Nuclear Fuel Services reprocessing facility at West Valley, New York. Nuclear Fuel Services conducted an environmental monitoring program in accordance with Nuclear Regulatory Commission requirements which were appropriate for shutdown maintenance operations conducted at the site. That program was embraced by West Valley Nuclear Services Company (WVNS) at the time of transition (February 26, 1982) and will be modified to provide a comprehensive monitoring program in preparation for waste solidification operations scheduled for startup in June 1988. As such, the data presented in this report is considered preoperational in nature in accordance with DOE Order 5484.1, Chapter III, Paragraph 1. The environmental monitoring program planned for the operating phase of the project will be fully implemented by fiscal year 1985 and will provide at least two years of preoperational data prior to startup

  6. Demonstrating a small utility approach to demand-side program implementation

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    The US DOE awarded a grant to the Burlington Electric Department (B.E.D.) to test a demand-side management (DSM) demonstration program designed to quickly save a significant amount of power with little disruption to the utility's customers or its normal operations. B.E.D. is a small municipal utility located in northern Vermont, with a lengthy history of successful DSM involvement. In our grant application, we proposed to develop a replicable program and approach to DSM that might be useful to other small utilities and to write a report to enable such replication. We believe that this DSM program and/or individual program components are replicable. This report is designed to allow other utilities interested in DSM to replicate this program or specific program design features to meet their DSM goals. We also wanted to use the opportunity of this grant to test the waters of residential heating fuel-switching. We hoped to test the application of one fuel-switching technology, and to benefit from the lessons learned in developing a full-scale DSM program for this end- use. To this end the pilot effort has been very successful. In the pilot pressure we installed direct-vent gas fired space heaters sized as supplemental heating units in 44 residences heated solely by electric resistance heat. We installed the gas space heating units at no cost to the owners or residents. We surveyed participating customers. The results of those surveys are included in this report and preliminary estimates of winter peak capacity load reductions are also noted in this report.

  7. Demonstrating a small utility approach to demand-side program implementation

    International Nuclear Information System (INIS)

    1991-01-01

    The US DOE awarded a grant to the Burlington Electric Department (B.E.D.) to test a demand-side management (DSM) demonstration program designed to quickly save a significant amount of power with little disruption to the utility's customers or its normal operations. B.E.D. is a small municipal utility located in northern Vermont, with a lengthy history of successful DSM involvement. In our grant application, we proposed to develop a replicable program and approach to DSM that might be useful to other small utilities and to write a report to enable such replication. We believe that this DSM program and/or individual program components are replicable. This report is designed to allow other utilities interested in DSM to replicate this program or specific program design features to meet their DSM goals. We also wanted to use the opportunity of this grant to test the waters of residential heating fuel-switching. We hoped to test the application of one fuel-switching technology, and to benefit from the lessons learned in developing a full-scale DSM program for this end- use. To this end the pilot effort has been very successful. In the pilot pressure we installed direct-vent gas fired space heaters sized as supplemental heating units in 44 residences heated solely by electric resistance heat. We installed the gas space heating units at no cost to the owners or residents. We surveyed participating customers. The results of those surveys are included in this report and preliminary estimates of winter peak capacity load reductions are also noted in this report

  8. [The elementary discussion on digital implant dentistry].

    Science.gov (United States)

    Su, Y C

    2016-04-09

    It is a digital age today. Exposed to all kinds of digital products in many fields. Certainly, implant dentistry is not exception. Digitalization could improve the outcomes and could decrease the complications of implant dentistry. This paper introduces the concepts, definitions, advantages, disadvantages, limitations and errors of digital implant dentistry.

  9. The relationship of fluidized bed technology to the U.S. Clean Coal Technology demonstration program

    International Nuclear Information System (INIS)

    Weth, G.; Geffken, J.; Huber, D.A.

    1991-01-01

    Fluidized Bed Combustion projects (both AFBCs and PFBCs) have a prominent role in the US DOE Clean Coal Technology (CCT) Program. This program has the successful commercialization of these technologies as its primary objective and this is the basic criterion for government funding and participation in the development and demonstration of the technologies. Under the CCT program the US DOE is actively involved in the development and operation of three Fluidized Bed Technology projects, NUCLA, TIDD, and SPORN, and is in the negotiation stage on others, Dairyland, Nichols and Tallahassee. All of these projects, along with the operating information on fluidized beds in the industrial sector, will provide a basis for evaluating future utilization of Fluidized Bed Technology in the market place. Impacting upon further utilization will be the time-frame and the Clean Air Act Amendments of 1990. This paper presents the results of a study to ascertain the commercial readiness of Fluidized Bed Technology to meet the emissions and time-frame requirements of the Clean Air Act Amendments of 1990. Specifically addressed are: Commercialization criteria/factors which candidate and/or existing CCTs must achieve in order to gain market acceptance. The status of Fluidized Bed Technology in achieving these commercialization criteria for market acceptance (industrial and utility) consistent with the time frame of the Clean Air Act Amendments of 1990. Recommendations of commercialization criteria for future fluidized bed CCT demonstration projects

  10. Dentistry and Dental Hygiene Handbook.

    Science.gov (United States)

    New York State Education Dept., Albany. Office of the Professions.

    The handbook contains laws, rules, and regulations of the New York State Education Department that govern dentistry and dental hygiene practice in the state. It describes licensure requirements and includes complete application forms and instructions for obtaining license and first registration as a dentist and dental hygienist. Applicants are…

  11. The Intraoral Ultrasonography in Dentistry

    African Journals Online (AJOL)

    2016-06-03

    Jun 3, 2016 ... mucosa, the tongue, periodontal tissues, and periapical lesions. The main purpose ... in dentistry were reported in 1963 by Baum et al.[2]. Ultrasound is the .... in most cases, is not easily detected if it is depressed when placing the ..... changes of patients with chronic renal failure by CBCT. Dentomaxillofac ...

  12. Active vibration control testing of the SPICES program: final demonstration article

    Science.gov (United States)

    Dunne, James P.; Jacobs, Jack H.

    1996-05-01

    The Synthesis and Processing of Intelligent Cost Effective Structures (SPICES) Program is a partnership program sponsored by the Advanced Research Projects Agency. The mission of the program is to develop cost effective material processing and synthesis technologies to enable new products employing active vibration suppression and control devices to be brought to market. The two year program came to fruition in 1995 through the fabrication of the final smart components and testing of an active plate combined with two trapezoidal rails, forming an active mount. Testing of the SPICES combined active mount took place at McDonnell Douglas facilities in St. Louis, MO, in October-December 1995. Approximately 15 dB reduction in overall response of a motor mounted on the active structure was achieved. Further details and results of the SPICES combined active mount demonstration testing are outlined. Results of numerous damping and control strategies that were developed and employed in the testing are presented, as well as aspects of the design and fabrication of the SPICES active mount components.

  13. Design of benign matrix drums for the non-destructive assay performance demonstration program for the National TRU Program

    International Nuclear Information System (INIS)

    Becker, G.K.

    1996-09-01

    Regulatory compliance programs associated with the Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP) Transuranic (TRU) Waste Characterization Program (the Program) require the collection of waste characterization data of known quality to support repository performance assessment, permitting, and associated activities. Blind audit samples, referred to as PDP (performance demonstration program) samples, are devices used in the NDA PDP program to acquire waste NDA system performance data per defined measurement routines. As defined under the current NDA PDP Program Plan, a PDP sample consists of a DOT 17C 55-gallon PDP matrix drum configured with insertable radioactive standards, working reference materials (WRMs). The particular manner in which the matrix drum and PDP standard(s) are combined is a function of the waste NDA system performance test objectives of a given cycle. The scope of this document is confined to the design of the PDP drum radioactive standard internal support structure, the matrix type and the as installed configuration. The term benign is used to designate a matrix possessing properties which are nominally non-interfering to waste NDA measurement techniques. Measurement interference sources are technique specific but include attributes such as: high matrix density, heterogeneous matrix distributions, matrix compositions containing high moderator/high Z element concentrations, etc. To the extent practicable the matrix drum design should not unduly bias one NDA modality over another due to the manner in which the matrix drum configuration manifests itself to the measurement system. To this end the PDP matrix drum configuration and composition detailed below is driven primarily by the intent to minimize the incorporation of matrix attributes known to interfere with fundamental waste NDA modalities, i.e. neutron and gamma based techniques

  14. Isotope Brayton ground demonstration testing and flight qualification. Volume 1. Technical program

    Energy Technology Data Exchange (ETDEWEB)

    1974-12-09

    A program is proposed for the ground demonstration, development, and flight qualification of a radioisotope nuclear heated dynamic power system for use on space missions beginning in the 1980's. This type of electrical power system is based upon and combines two aerospace technologies currently under intense development; namely, the MHW isotope heat source and the closed Brayton cycle gas turbine. This power system represents the next generation of reliable, efficient economic electrical power equipment for space, and will be capable of providing 0.5 to 2.0 kW of electric power to a wide variety of spacecraft for earth orbital and interplanetary missions. The immediate design will be based upon the requirements for the Air Force SURVSATCOM mission. The proposal is presented in three volumes plus an Executive Summary. This volume describes the tasks in the technical program.

  15. NASA Applied Sciences Program. Overview Presentation; Discovering and Demonstrating Innovative and Practical Applications of Earth Science

    Science.gov (United States)

    Irwin, Daniel

    2010-01-01

    Goal 1: Enhance Applications Research Advance the use of NASA Earth science in policy making, resource management and planning, and disaster response. Key Actions: Identify priority needs, conduct applied research to generate innovative applications, and support projects that demonstrate uses of NASA Earth science. Goal 2: Increase Collaboration Establish a flexible program structure to meet diverse partner needs and applications objectives. Key Actions: Pursue partnerships to leverage resources and risks and extend the program s reach and impact. Goal 3:Accelerate Applications Ensure that NASA s flight missions plan for and support applications goals in conjunction with their science goals, starting with mission planning and extending through the mission life cycle. Key Actions: Enable identification of applications early in satellite mission lifecycle and facilitate effective ways to integrate end-user needs into satellite mission planning

  16. General Electric Company proposed test and evaluation plan, commercial buildings. National Solar Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-04-01

    The general requirements and methods for instrumenting, testing, and evaluating solar HVAC systems forming a part of ERDA's ''Commercial Demonstration Program'' commensurate with ERDA 23A and the Proposed Management Plan 75SDS4270 are defined. Design requirements are specified for the performance of components and subsystems comprising the instrumentation and data gathering system, as well as the support functions required to perform the diagnostic measurements, collection and processing of data, and documentation of reports on solar HVAC system performance, including economic and societal evaluations.

  17. Knowledge of drug prescription in dentistry students

    Directory of Open Access Journals (Sweden)

    Guzmán-Álvarez R

    2012-06-01

    .9%, ampicillin (n = 7, 10.6%, and penicillin V and clindamycin (n = 3, 4.5%. The most frequent errors reported by students were: lack of knowledge about drug posology (n = 49, 74.2%, improperly filled prescriptions (n = 7, 10.7%, not knowing the brand names and uncertainty about the correct drug indicated for each case (n = 3, 4.54%, not knowing the duration of treatment (n = 2, 3%, not asking the patient about possible allergies, and not giving prescriptions (n = 1, 1.5%. The sources of information used by students for prescribing drugs included the professors at the clinics (n = 49, 74.2%, the pharmacology course (n = 7, 10.7%, medical dictionary consultation (n = 15, 22.72%, classmate support (n = 3, 4.54%, and information provided by medical representatives from pharmaceutical companies (n = 1, 1.5%. Finally, only 20 students (30.3% followed the WHO Guide to Good Prescribing, 40 students acknowledged not following it (60.6%, and six students (9.1% had no knowledge of it.Conclusion: The knowledge of pharmacology among fourth-year students in the School of Dentistry has gaps that could affect patient safety. More studies are needed to determine whether this issue affects the quality of patient care and the effectiveness and safety of treatments. Since prescribing accurately is extremely important, it is necessary to develop therapeutic guidelines, and to provide pharmacological therapy courses. The implementation of educational programs, including the WHO Guide to Good Prescribing and Patient Safety Curriculum Guide, would be beneficial in helping students develop prescribing skills.Keywords: prescription, dentistry prescription, most used NSAIDs by dentists, most used antibiotics, dentist prescribing errors, sources of information for prescribing, WHO Guide to Good Prescribing

  18. Performance Demonstration Program Plan for RCRA Constituent Analysis of Solidified Wastes

    International Nuclear Information System (INIS)

    2006-01-01

    The Performance Demonstration Program (PDP) for Resource Conservation and Recovery Act (RCRA) constituents distributes test samples for analysis of volatile organic compounds (VOCs), semivolatile organic compounds (SVOCs), and metals in solid matrices. Each distribution of test samples is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements performed for transuranic (TRU) waste characterization. The primary documents governing the conduct of the PDP are the Quality Assurance Program Document (QAPD; DOE/CBFO-94-1012) and the Waste Isolation Pilot Plant (WIPP) Waste Analysis Plan (WAP) contained in the Hazardous Waste Facility Permit (NM4890139088-TSDF) issued by the New Mexico Environment Department. The WAP requires participation in the PDP; the PDP must comply with the QAPD and the WAP. This plan implements the general requirements of the QAPD and the applicable requirements of the WAP for the RCRA PDP. Participating laboratories demonstrate acceptable performance by successfully analyzing single-blind performance evaluation samples (subsequently referred to as PDP samples) according to the criteria established in this plan. PDP samples are used as an independent means to assess laboratory performance regarding compliance with the WAP quality assurance objectives (QAOs). The concentrations of analytes in the PDP samples address levels of regulatory concern and encompass the range of concentrations anticipated in waste characterization samples. The WIPP requires analyses of homogeneous solid wastes to demonstrate compliance with regulatory requirements. These analyses must be performed by laboratories that demonstrate acceptable performance in this PDP. These analyses are referred to as WIPP analyses, and the samples on which they are performed are referred to as WIPP samples. Participating laboratories must analyze PDP samples using the same procedures used for WIPP samples.

  19. Performance demonstration program plan for RCRA constituent analysis of solidified wastes

    International Nuclear Information System (INIS)

    1995-06-01

    Performance Demonstration Programs (PDPS) are designed to help ensure compliance with the Quality Assurance Objectives (QAOs) for the Waste Isolation Pilot Plant (WIPP). The PDPs are intended for use by the Department of Energy (DOE) Carlsbad Area Office (CAO) to assess and approve the laboratories and other measurement facilities supplying services for the characterization of WIPP TRU waste. The PDPs may also be used by CAO in qualifying laboratories proposing to supply additional analytical services that are required for other than waste characterization, such as WIPP site operations. The purpose of this PDP is to test laboratory performance for the analysis of solidified waste samples for TRU waste characterization. This performance will be demonstrated by the successful analysis of blind audit samples of simulated, solidified TRU waste according to the criteria established in this plan. Blind audit samples (hereinafter referred to as PDP samples) will be used as an independent means to assess laboratory performance regarding compliance with the QAOs. The concentration of analytes in the PDP samples will address levels of regulatory concern and will encompass the range of concentrations anticipated in actual waste characterization samples. Analyses that are required by the WIPP to demonstrate compliance with various regulatory requirements and which are included in the PDP must be performed by laboratories that demonstrate acceptable performance in the PDP. These analyses are referred to as WIPP analyses and the samples on which they are performed are referred to as WIPP samples for the balance of this document

  20. Knowledge and attitude of pediatricians and Family Physicians in Chennai on Pediatric Dentistry: A survey

    Directory of Open Access Journals (Sweden)

    Rangeeth Bollam Nammalwar

    2012-01-01

    Conclusion: When basic medical training is provided in dental school, medical schools can also provide dental training. Dental lectures can also be incorporated into CME programs and recognition of pediatric dentistry by providing referral to needy patients have been suggested.

  1. Geriatric dentistry education and context in a selection of countries in 5 continents.

    Science.gov (United States)

    Marchini, Leonardo; Ettinger, Ronald; Chen, Xi; Kossioni, Anastassia; Tan, Haiping; Tada, Sayaka; Ikebe, Kazunori; Dosumu, Elizabeth Bosede; Oginni, Fadekemi O; Akeredolu, Patricia Adetokunbo; Butali, Azeez; Donnelly, Leeann; Brondani, Mario; Fritzsch, Bernd; Adeola, Henry A

    2018-05-01

    To summarize and discuss how geriatric dentistry has been addressed in dental schools of different countries regarding to (1) teaching students at the predoctoral level; (2) advanced training, and (3) research. A convenience sample of faculty members from a selection of high, upper-middle and lower-middle income countries were recruited to complete the survey. The survey had 5 open-ended main topics, and asked about (1) the size of their elderly population, (2) general information about dental education; (3) the number of dental schools teaching geriatric dentistry, and their teaching methods; (4) advanced training in geriatric dentistry; (5) scholarship/research in geriatric dentistry. (1) There is great variation in the size of elderly population; (2) duration of training and content of dental education curriculum varies; (3) geriatric dentistry has not been established as a standalone course in dental schools in the majority of the countries, (4) most countries, with the exception of Japan, lack adequate number of dentists trained in geriatric dentistry as well as training programs, and (5) geriatric dentistry-related research has increased in recent years in scope and content, although the majority of these papers are not in English. © 2018 Special Care Dentistry Association and Wiley Periodicals, Inc.

  2. Graduate and Undergraduate Geriatric Dentistry Education in a Selected Dental School in Japan

    Science.gov (United States)

    Kitagawa, Noboru; Sato, Yuji; Komabayashi, Takashi

    2010-01-01

    Geriatric dentistry and its instruction are critical in a rapidly aging population. Japan is the world’s fastest-aging society, and thus geriatric dentistry education in Japan can serve as a global model for other countries that will soon encounter the issues that Japan has already confronted. This study aimed to evaluate geriatric dental education with respect to the overall dental education system, undergraduate geriatric dentistry curricula, mandatory internships, and graduate geriatric education of a selected dental school in Japan. Bibliographic data and local information were collected. Descriptive and statistical analyses (Fisher and Chi-square test) were conducted. Japanese dental schools teach geriatric dentistry in 10 geriatric dentistry departments as well as in prosthodontic departments. There was no significant differences found between the number of public and private dental schools with geriatric dentistry departments (p = 0.615). At Showa University School of Dentistry, there are more didactic hours than practical training hours; however, there is no significant didactic/practical hour distribution difference between the overall dental curriculum and fourth-year dental students’ geriatric dental education curriculum (p=0.077). Graduate geriatric education is unique because it is a four-year Ph.D. course of study; there is neither a Master’s degree program nor a certificate program in Geriatric Dentistry. Overall, both undergraduate and graduate geriatric dentistry curricula are multidisciplinary. This study contributes to a better understanding of geriatric dental education in Japan; the implications of this study include developing a clinical/didactic curriculum, designing new national/international dental public health policies, and calibrating the competency of dentists in geriatric dentistry. PMID:21985207

  3. Comparative study of faculties of dentistry of Rio de Janeiro and Universidade Federal da Paraiba in relation to teaching of radiation protection in Dentistry

    International Nuclear Information System (INIS)

    Padilha Filho, L.G.; Raymundo Junior, R.; Koch, H.A.; Guedes, W.M.S.; Oliveira, L.C.G.; Berquo, F.R.; Cherchinaro, C.C.

    2001-01-01

    This study compares the qualification and formation in radiation protection, of the students of Dentistry Faculties of Universities in Rio de Janeiro and Paraiba States (Brazil), and recommends the inclusion of Radiation Protection and Image Quality discipline, in the curriculum of Dentistry Faculties, in order to unify the contents and programs in the different study plans. Also to elaborate an appropriate educational training, so that the students of the Brazilian Universities can have the same knowledge about these important themes

  4. Clean Coal Technology Demonstration Program: Project fact sheets 2000, status as of June 30, 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    The Clean Coal Technology Demonstration Program (CCT Program), a model of government and industry cooperation, responds to the Department of Energy's (DOE) mission to foster a secure and reliable energy system that is environmentally and economically sustainable. The CCT Program represents an investment of over $5.2 billion in advanced coal-based technology, with industry and state governments providing an unprecedented 66 percent of the funding. With 26 of the 38 active projects having completed operations, the CCT Program has yielded clean coal technologies (CCTs) that are capable of meeting existing and emerging environmental regulations and competing in a deregulated electric power marketplace. The CCT Program is providing a portfolio of technologies that will assure that U.S. recoverable coal reserves of 274 billion tons can continue to supply the nation's energy needs economically and in an environmentally sound manner. As the nation embarks on a new millennium, many of the clean coal technologies have realized commercial application. Industry stands ready to respond to the energy and environmental demands of the 21st century, both domestically and internationally, For existing power plants, there are cost-effective environmental control devices to control sulfur dioxide (S02), nitrogen oxides (NO,), and particulate matter (PM). Also ready is a new generation of technologies that can produce electricity and other commodities, such as steam and synthetic gas, and provide efficiencies and environmental performance responsive to global climate change concerns. The CCT Program took a pollution prevention approach as well, demonstrating technologies that remove pollutants or their precursors from coal-based fuels before combustion. Finally, new technologies were introduced into the major coal-based industries, such as steel production, to enhance environmental performance. Thanks in part to the CCT Program, coal--abundant, secure, and economical

  5. [Public health competencies and contents in Spanish university degree programs of physical therapy, occupational therapy, environmental science, dentistry and veterinary science].

    Science.gov (United States)

    Davó-Blanes, M Carmen; Vives-Cases, Carmen; Alvarez-Dardet, Carlos; Segura-Benedicto A, Andreu; Bosch Llonch, Fèlix; G Benavides, Fernando

    2014-01-01

    To identify the basic competencies and contents related to public health to be included in degree programs according to the perspective of lecturers from various Spanish universities. In the context of the Second Workshop on Public Health Contents in Degree Programs (Mahon, 19 to 20 September 2012), 20 lecturers from different Spanish universities were distributed in five working groups. The lecturers had been selected from the instructional guides on public health and epidemiology published on the web sites of the Rectors' Conference of Spanish Universities. Each group worked on a degree program and the results were discussed in plenary sessions. The activities and competencies related to the three basic functions of public health were identified in all degree programs. Most of the professional competencies identified were related to the function of «assessment of population health needs». The contents proposed by the working groups related to epidemiology, basic concepts in public health, public health intervention, health management, and health policy. The main common topics among the degrees concerned the first three contents. Public health professional competencies and contents were identified in the degree programs examined. These results may serve as a starting point for a more detailed review of public health programs across degree levels and the search for a consensus on the common content that should be included in each of them. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

  6. Demand in Pediatric Dentistry for Sedation and General Anesthesia by Dentist Anesthesiologists: A Survey of Directors of Dentist Anesthesiologist and Pediatric Dentistry Residencies

    Science.gov (United States)

    Hicks, C. Gray; Jones, James E.; Saxen, Mark A.; Maupome, Gerardo; Sanders, Brian J.; Walker, LaQuia A.; Weddell, James A.; Tomlin, Angela

    2012-01-01

    This study describes what training programs in pediatric dentistry and dental anesthesiology are doing to meet future needs for deep sedation/general anesthesia services required for pediatric dentistry. Residency directors from 10 dental anesthesiology training programs in North America and 79 directors from pediatric dentistry training programs in North America were asked to answer an 18-item and 22-item online survey, respectively, through an online survey tool. The response rate for the 10 anesthesiology training program directors was 9 of 10 or 90%. The response rate for the 79 pediatric dentistry training program directors was 46 of 79 or 58%. Thirty-seven percent of pediatric dentistry programs use clinic-based deep sedation/general anesthesia for dental treatment in addition to hospital-based deep sedation/general anesthesia. Eighty-eight percent of those programs use dentist anesthesiologists for administration of deep sedation/general anesthesia in a clinic-based setting. Pediatric dentistry residency directors perceive a future change in the need for deep sedation/general anesthesia services provided by dentist anesthesiologists to pediatric dentists: 64% anticipate an increase in need for dentist anesthesiologist services, while 36% anticipate no change. Dental anesthesiology directors compared to 2, 5, and 10 years ago have seen an increase in the requests for dentist anesthesiologist services by pediatric dentists reported by 56% of respondents (past 2 years), 63% of respondents (past 5 years), and 88% of respondents (past 10 years), respectively. Predicting the future need of dentist anesthesiologists is an uncertain task, but these results show pediatric dentistry directors and dental anesthesiology directors are considering the need, and they recognize a trend of increased need for dentist anesthesiologist services over the past decade. PMID:22428968

  7. Demand in pediatric dentistry for sedation and general anesthesia by dentist anesthesiologists: a survey of directors of dentist anesthesiologist and pediatric dentistry residencies.

    Science.gov (United States)

    Hicks, C Gray; Jones, James E; Saxen, Mark A; Maupome, Gerardo; Sanders, Brian J; Walker, Laquia A; Weddell, James A; Tomlin, Angela

    2012-01-01

    This study describes what training programs in pediatric dentistry and dental anesthesiology are doing to meet future needs for deep sedation/general anesthesia services required for pediatric dentistry. Residency directors from 10 dental anesthesiology training programs in North America and 79 directors from pediatric dentistry training programs in North America were asked to answer an 18-item and 22-item online survey, respectively, through an online survey tool. The response rate for the 10 anesthesiology training program directors was 9 of 10 or 90%. The response rate for the 79 pediatric dentistry training program directors was 46 of 79 or 58%. Thirty-seven percent of pediatric dentistry programs use clinic-based deep sedation/general anesthesia for dental treatment in addition to hospital-based deep sedation/general anesthesia. Eighty-eight percent of those programs use dentist anesthesiologists for administration of deep sedation/general anesthesia in a clinic-based setting. Pediatric dentistry residency directors perceive a future change in the need for deep sedation/general anesthesia services provided by dentist anesthesiologists to pediatric dentists: 64% anticipate an increase in need for dentist anesthesiologist services, while 36% anticipate no change. Dental anesthesiology directors compared to 2, 5, and 10 years ago have seen an increase in the requests for dentist anesthesiologist services by pediatric dentists reported by 56% of respondents (past 2 years), 63% of respondents (past 5 years), and 88% of respondents (past 10 years), respectively. Predicting the future need of dentist anesthesiologists is an uncertain task, but these results show pediatric dentistry directors and dental anesthesiology directors are considering the need, and they recognize a trend of increased need for dentist anesthesiologist services over the past decade.

  8. Subsurface Planar Vitrification Treatment of Problematic TRU Wastes: Status of a Technology Demonstration Program

    International Nuclear Information System (INIS)

    Morse, M.K.; Nowack, B.R.; Thompson, L.E.

    2006-01-01

    This paper provides a status of the In Situ Transuranic Waste Delineation and Removal Project in which the GeoMelt R Subsurface Planar Vitrification TM (SPV TM ) process is being evaluated for the in situ treatment of burial sites containing remote handled mixed transuranic (TRU) waste. The GeoMelt R SPV TM process was invented and patented by Geosafe Corporation. AMEC holds the exclusive worldwide license to use this technology. The current project is part of a three-phase demonstration program to evaluate the effectiveness of the GeoMelt R SPV TM process to treat waste contained in vertical pipe units (VPUs) and caissons that were used for the disposal of remote handled transuranic wastes located at Hanford's 618-10 and 618-11 burial grounds. This project is being performed for the US Department of Energy (DOE) for use at the Hanford site and other DOE installations. The Phase I evaluation determined that removal and treatment of the 618-10/11 VPUs are beyond what can be safely accomplished using conventional excavation methods. Accordingly, a careful stepwise non-intrusive delineation approach and treatment using the GeoMelt R SPV TM technology, followed by removal, characterization, and disposal of the resulting inert vitrified mass was identified as the preferred alternative. Phase II of the project, which started in July 2004, included a full-scale non-radioactive demonstration of AMEC's GeoMelt R SPV TM process on a mock VPU configured to match the actual VPUs. The non-radioactive demonstration (completed in May 2005) was performed to confirm the approach and design before proceeding to a radioactive ('hot') demonstration on an actual VPU. This demonstration took approximately 130 hours, processed the entire mock VPU, and resulted in a vitrified monolith weighing an estimated 90 tonnes. [1] Plans for a radioactive demonstration on an actual VPU are being developed for CY 2006. In addition to demonstrating GeoMelt R SPV TM , delineation techniques are being

  9. Teenage Parent Programs: A Synthesis of the Long-Term Effects of the New Chance Demonstration, Ohio's Learning, Earning, and Parenting Program, and the Teenage Parent Demonstration.

    Science.gov (United States)

    Granger, Robert C.; Cytron, Rachel

    1999-01-01

    Synthesizes the long-term findings of three major evaluations of programs that began in the late 1980s and were designed to improve the self-efficacy of teenage mothers on welfare. Economic outcomes for the mothers improved over time, and the interventions had some positive effects, although they did not affect fertility. (SLD)

  10. Nanotechnology in dentistry: reduction to practice.

    Science.gov (United States)

    Ure, David; Harris, Jonathan

    2003-01-01

    The speed at which advances are being made in science has catapulted nanotechnology from its theoretical foundations straight into the real world. There are now many examples of commercially available products demonstrating that, in given situations, the technology really does work and that its scope for further application is wide. Healthcare, along with society as a whole, is facing a major revolution in the wake of ongoing technological developments in the field of nanotechnology. Dentistry as an individual healthcare discipline is not exempt, having already been targeted directly with novel 'nano-materials' at the same time as indirectly enjoying the benefits of nano-related advances in the electronics industry through the ongoing computerization of the modern practice. This article examines current practical applications of nanotechnology alongside proposed applications in the future and aims to demonstrate that, as well as a good deal of science fiction, there is some tangible science fact emerging from this novel multi-disciplinary science.

  11. Demonstration of an Integrated Pest Management Program for Wheat in Tajikistan

    Science.gov (United States)

    Landis, Douglas A.; Saidov, Nurali; Jaliov, Anvar; El Bouhssini, Mustapha; Kennelly, Megan; Bahlai, Christie; Landis, Joy N.; Maredia, Karim

    2016-01-01

    Wheat is an important food security crop in central Asia but frequently suffers severe damage and yield losses from insect pests, pathogens, and weeds. With funding from the United States Agency for International Development, a team of scientists from three U.S. land-grant universities in collaboration with the International Center for Agricultural Research in Dry Areas and local institutions implemented an integrated pest management (IPM) demonstration program in three regions of Tajikistan from 2011 to 2014. An IPM package was developed and demonstrated in farmer fields using a combination of crop and pest management techniques including cultural practices, host plant resistance, biological control, and chemical approaches. The results from four years of demonstration/research indicated that the IPM package plots almost universally had lower pest abundance and damage and higher yields and were more profitable than the farmer practice plots. Wheat stripe rust infestation ranged from 30% to over 80% in farmer practice plots, while generally remaining below 10% in the IPM package plots. Overall yield varied among sites and years but was always at least 30% to as much as 69% greater in IPM package plots. More than 1,500 local farmers—40% women—were trained through farmer field schools and field days held at the IPM demonstration sites. In addition, students from local agricultural universities participated in on-site data collection. The IPM information generated by the project was widely disseminated to stakeholders through peer-reviewed scientific publications, bulletins and pamphlets in local languages, and via Tajik national television. PMID:28446990

  12. Biomaterials in Relation to Dentistry.

    Science.gov (United States)

    Deb, Sanjukta; Chana, Simran

    2015-01-01

    Dental caries remains a challenge in the improvement of oral health. It is the most common and widespread biofilm-dependent oral disease, resulting in the destruction of tooth structure by the acidic attack from cariogenic bacteria. The tooth is a heavily mineralised tissue, and both enamel and dentine can undergo demineralisation due to trauma or dietary conditions. The adult population worldwide affected by dental caries is enormous and despite significant advances in caries prevention and tooth restoration, treatments continue to pose a substantial burden to healthcare. Biomaterials play a vital role in the restoration of the diseased or damaged tooth structure and, despite providing reasonable outcomes, there are some concerns with clinical performance. Amalgam, the silver grey biomaterial that has been widely used as a restorative material in dentistry, is currently in throes of being phased out, especially with the Minimata convention and treaty being signed by a number of countries (January 2013; http://mercuryconvention.org/Convention/) that aims to control the anthropogenic release of mercury in the environment, which naturally impacts the use of amalgam, where mercury is a component. Thus, the development of alternative restoratives and restoration methods that are inexpensive, can be used under different climatic conditions, withstand storage and allow easy handling, the main prerequisites of dental biomaterials, is important. The potential for using biologically engineered tissue and consequent research to replace damaged tissues has also seen a quantum leap in the last decade. Ongoing research in regenerative treatments in dentistry includes alveolar ridge augmentation, bone tissue engineering and periodontal ligament replacement, and a future aim is bioengineering of the whole tooth. Research towards developing bioengineered teeth is well underway and identification of adult stem cell sources to make this a viable treatment is advancing; however, this

  13. 34 CFR 425.1 - What is the Demonstration Projects for the Integration of Vocational and Academic Learning Program?

    Science.gov (United States)

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What is the Demonstration Projects for the Integration of Vocational and Academic Learning Program? 425.1 Section 425.1 Education Regulations of the Offices... EDUCATION DEMONSTRATION PROJECTS FOR THE INTEGRATION OF VOCATIONAL AND ACADEMIC LEARNING PROGRAM General...

  14. 48 CFR 52.219-19 - Small Business Concern Representation for the Small Business Competitiveness Demonstration Program.

    Science.gov (United States)

    2010-10-01

    ... Representation for the Small Business Competitiveness Demonstration Program. 52.219-19 Section 52.219-19 Federal... Representation for the Small Business Competitiveness Demonstration Program. As prescribed in 19.1008(a), insert the following provision: Small Business Concern Representation for the Small Business Competitiveness...

  15. Lasers in medicine and dentistry.

    Science.gov (United States)

    Lehnert, M W

    1996-01-01

    Since their introduction, great enthusiasm has greeted the application of lasers to medicine and dentistry. The future is exciting. Research will someday take us to the days of the "Star Trek" laser-scan tooth or bone repair procedures. Lasers are very specific in their application. Choose this new technology carefully, making choices and purchases based on quality scientific research and ongoing analysis and review.

  16. Business process modeling for the Virginia Department of Transportation : a demonstration with the integrated six-year improvement program and the statewide transportation improvement program.

    Science.gov (United States)

    2005-01-01

    This effort demonstrates business process modeling to describe the integration of particular planning and programming activities of a state highway agency. The motivations to document planning and programming activities are that: (i) resources for co...

  17. Business process modeling for the Virginia Department of Transportation : a demonstration with the integrated six-year improvement program and the statewide transportation improvement program : executive summary.

    Science.gov (United States)

    2005-01-01

    This effort demonstrates business process modeling to describe the integration of particular planning and programming activities of a state highway agency. The motivations to document planning and programming activities are that: (i) resources for co...

  18. Alternative fuels for vehicles fleet demonstration program. Final report, volume 2: Appendices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The Alternative Fuels for Vehicles Fleet Demonstration Program (AFV-FDP) was a multiyear effort to collect technical data for use in determining the costs and benefits of alternative-fuel vehicles (AFVs) in typical applications in New York State. This report, Volume 2, includes 13 appendices to Volume 1 that expand upon issues raised therein. Volume 1 provides: (1) Information about the purpose and scope of the AFV-FDP; (2) A summary of AFV-FDP findings organized on the basis of vehicle type and fuel type; (3) A short review of the status of AFV technology development, including examples of companies in the State that are active in developing AFVs and AFV components; and (4) A brief overview of the status of AFV deployment in the State. Volume 3 provides expanded reporting of AFV-FDP technical details, including the complete texts of the brochure Garage Guidelines for Alternative Fuels and the technical report Fleet Experience Survey Report, plus an extensive glossary of AFV terminology. The appendices cover a wide range of issues including: emissions regulations in New York State; production and health effects of ozone; vehicle emissions and control systems; emissions from heavy-duty engines; reformulated gasoline; greenhouse gases; production and characteristics of alternative fuels; the Energy Policy Act of 1992; the Clean Fuel Fleet Program; garage design guidelines for alternative fuels; surveys of fleet managers using alternative fuels; taxes on conventional and alternative fuels; and zero-emission vehicle technology.

  19. Occupational Safety and Health Program at the West Valley Demonstration Project

    International Nuclear Information System (INIS)

    L. M. Calderon

    1999-01-01

    The West Valley Nuclear Services Co. LLC (WVNS) is committed to provide a safe, clean, working environment for employees, and to implement U.S. Department of Energy (DOE) requirements affecting worker safety. The West Valley Demonstration Project (WVDP) Occupational Safety and Health Program is designed to protect the safety, health, and well-being of WVDP employees by identifying, evaluating, and controlling biological, chemical, and physical hazards in the work place. Hazards are controlled within the requirements set forth in the reference section at the end of this report. It is the intent of the WVDP Occupational Safety and Health Program to assure that each employee is provided with a safe and healthy work environment. This report shows the logical path toward ensuring employee safety in planning work at the WVDP. In general, planning work to be performed safely includes: combining requirements from specific programs such as occupational safety, industrial hygiene, radiological control, nuclear safety, fire safety, environmental protection, etc.; including WVDP employees in the safety decision-making processes; pre-planning using safety support re-sources; and integrating the safety processes into the work instructions. Safety management principles help to define the path forward for the WVDP Occupational Safety and Health Program. Roles, responsibilities, and authority of personnel stem from these ideals. WVNS and its subcontractors are guided by the following fundamental safety management principles: ''Protection of the environment, workers, and the public is the highest priority. The safety and well-being of our employees, the public, and the environment must never be compromised in the aggressive pursuit of results and accomplishment of work product. A graded approach to environment, safety, and health in design, construction, operation, maintenance, and deactivation is incorporated to ensure the protection of the workers, the public, and the environment

  20. Financial performance among adult day centers: results of a national demonstration program.

    Science.gov (United States)

    Reifler, B V; Henry, R S; Rushing, J; Yates, M K; Cox, N J; Bradham, D D; McFarlane, M

    1997-02-01

    This paper describes the financial performance (defined as percent of total expenses covered by net operating revenue) of 16 adult day centers participating in a national demonstration program on day services for people with dementia, including examination of possible predictors of financial performance. Participating sites submitted quarterly financial and utilization reports to the National Program Office. Descriptive statistics summarize the factors believed to influence financial performance. Sites averaged meeting 35% of expenses from self-pay and 29% from government (mainly Medicaid) revenue, totaling 64% of all (cash plus in-kind) expenses met by operating revenue. Examination of center characteristics suggests that factors related to meeting consumer needs, such as being open a full day (i.e., 7:30 am to 6:00 pm) rather than shorter hours, and providing transportation, may be related to improved utilization and, thus, improved financial performance. Higher fees were not related to lower enrollment, census, or revenue. Adult day centers are able to achieve financial viability through a combination of operating (i.e., fee-for-service) and non-operating revenue. Operating revenue is enhanced by placing emphasis on consumer responsiveness, such as being open a full day. Because higher fees were not related to lower utilization, centers should set fees to reflect actual costs. The figure of 64% of expenses met by operating revenue is conservative inasmuch as sites included in-kind revenue as expenses in their budgeting calculations, and percent of cash expenses met by operating revenue would be higher (approximately 75% for this group of centers).

  1. Radioprotection in dentistry: Analysis of the Dentistry Faculties of the Rio de Janeiro State not referring at personnel and installations

    International Nuclear Information System (INIS)

    Padilha F, L.G.; Borges, J.C.; Raymundo Junior, R.; Koch, H.A.

    1998-01-01

    The objective was to show the necessity and the importance of the training and formation of the dentist in radioprotection according to the recent proposal for technical regulations 'Radiological protection directrixes in Medical and Dentistry radiodiagnostic' of the Secretaria do Vigilancia Sanitaria of Ministerio da Saude (SVSMS). This regulation establishes basic standards to radioprotection in the medical and dentistry areas, including principles, limits, obligations and basic controls for the man and environment protection, versus possible improper effects caused by the use of ionizing radiation sources. An analysis of the discipline programs of the Dentistry Schools of Rio de Janeiro state indicates that they show a little or none preoccupation by the radiological protection, which was confirmed through a survey applied toward responsible professors by department or radiology service to the dentistry Schools. This work suggests the creation or adaptation of the existing disciplines introducing radioprotection and images quality in radiodiagnostic, to improve, complement and to make uniform the formation of future dentists optimizing the solution of the identified problems. (Author)

  2. Educators' and Applicants' Views of the Postdoctoral Pediatric Dentistry Admission Process: A Qualitative Study.

    Science.gov (United States)

    Ricker, Kevin; Mihas, Paul; Lee, Jessica Y; Guthmiller, Janet M; Roberts, Michael W; Divaris, Kimon

    2015-11-01

    The postdoctoral application and matching process in dental education is a high-stakes and resource-intensive process for all involved. While programs seek the most qualified candidates, applicants strive to be competitive to increase their likelihood of being accepted to a desirable program. There are limited data regarding either subjective or objective factors underlying the complex interplay between programs and applicants. This qualitative study sought to provide insight into the stakeholders' experiences and views on the matching process. Telephone and in-person interviews were conducted with ten pediatric dentistry program directors and ten recent applicants to pediatric dentistry programs in the United States in 2013-14. Participants were selected to represent the geographic (five districts of the American Academy of Pediatric Dentistry) and institutional (hospital- or university-based) diversity of pediatric dentistry programs. Interviews were recorded and transcribed verbatim. Veracity and need for more information were the themes most often articulated by both groups. The program directors most valued teachability and self-motivation as desirable applicant characteristics. The applicants relied primarily on subjective sources to gather information about programs and prioritized location and financial factors as pivotal for their rankings. Both groups appreciated the uniformity of the current application process and highlighted several weaknesses and areas for improvement. These results shed light on the postdoctoral matching process in pediatric dentistry via a qualitative description of stakeholders' experiences and viewpoints. These insights can serve as a basis for improving and refining the matching process.

  3. Achievements of the French laser uranium enrichment program and final demonstrations

    International Nuclear Information System (INIS)

    Bordier, G.

    2006-01-01

    The research on Atomic Vapor Laser Isotope Separation (SILVA in French) started in France during the seventies at the Commissariat a l'Energie Atomique (CEA) through basic experiments on uranium spectroscopy and evaporation. The program gained momentum rapidly with the decision in 1985 to focus on SILVA while decreasing the research on chemical exchange process, centrifugation and laser molecular route. Similar orientations were taken during the same period in the US and in Japan. The French need in uranium enrichment service, around 5 MSWU (million Separation Work Units) for 45 electronuclear reactors in 1985, was fulfilled by gaseous diffusion in EURODIF (multinational consortium). But the expected increase in the international need, especially in Asia, and the high cost of the energy power supply necessary for gaseous diffusion were the main reasons to search for a very efficient and selective new generation enrichment process like SILVA. The scientific demonstration of the SILVA process was completed in the mid 1990's with grams of separated uranium at both the requested industrial enriched and tail assays simultaneously. However, in the late 90's, some technical difficulties appeared in the scaling up of the process to produce kilograms of enriched uranium. In 1998 a scientific peer review defined some general goals and improvements to be performed, partly reached on the Pelleas facility in Saclay, two years later. In parallel the centrifugation technology made important progress (in Europe, URENCO consortium and in Japan) related to the emergence of high performance carbon fibers. In September 2000, a French ministerial nuclear committee chose the centrifugation as the reference industrial technology to substitute for gaseous diffusion in 2010-2015: SILVA was not enough mature and competitive to be developed at an industrial scale within such a delay. In order to save properly the knowledge and to account for potential future uses, the committee settled on a

  4. Photovoltaic Power System and Power Distribution Demonstration for the Desert RATS Program

    Science.gov (United States)

    Colozza, Anthony; Jakupca, Ian; Mintz, Toby; Herlacher, Mike; Hussey, Sam

    2012-01-01

    A stand alone, mobile photovoltaic power system along with a cable deployment system was designed and constructed to take part in the Desert Research And Technology Studies (RATS) lunar surface human interaction evaluation program at Cinder Lake, Arizona. The power system consisted of a photovoltaic array/battery system. It is capable of providing 1 kW of electrical power. The system outputs were 48 V DC, 110 V AC, and 220 V AC. A cable reel with 200 m of power cable was used to provide power from the trailer to a remote location. The cable reel was installed on a small trailer. The reel was powered to provide low to no tension deployment of the cable. The cable was connected to the 220 V AC output of the power system trailer. The power was then converted back to 110 V AC on the cable deployment trailer for use at the remote site. The Scout lunar rover demonstration vehicle was used to tow the cable trailer and deploy the power cable. This deployment was performed under a number of operational scenarios, manned operation, remote operation and tele-robotically. Once deployed, the cable was used to provide power, from the power system trailer, to run various operational tasks at the remote location.

  5. Component Fragility Research Program: Phase 1, Demonstration tests: Volume 1, Summary report

    International Nuclear Information System (INIS)

    Holman, G.S.; Chou, C.K.; Shipway, G.D.; Glozman, V.

    1987-08-01

    This report describes tests performed in Phase I of the NRC Component Fragility Research Program. The purpose of these tests was to demonstrate procedures for characterizing the seismic fragility of a selected component, investigating how various parameters affect fragility, and finally using test data to develop practical fragility descriptions suitable for application in probabilistic risk assessments. A three-column motor control center housing motor controllers of various types and sizes as well as relays of different types and manufacturers was subjected to seismic input motions up to 2.5g zero period acceleration. To investigate the effect of base flexibility on the structural behavior of the MCC and on the functional behavior of the electrical devices, multiple tests were performed on each of four mounting configurations: four bolts per column with top bracking, four bolts per column with no top brace, four bolts per column with internal diagonal bracking, and two bolts per column with no top or internal bracking. Device fragility was characterized by contact chatter correlated to local in-cabinet response at the device location. Seismic capacities were developed for each device on the basis of local input motion required to cause chatter; these results were then applied to develop probabilistic fragility curves for each type of device, including estimates of the ''high-confidence low probability of failure'' capacity of each

  6. Development and pilot demonstration program of a waste minimization plan at Argonne National Laboratory

    International Nuclear Information System (INIS)

    Peters, R.W.; Wentz, C.A.; Thuot, J.R.

    1991-01-01

    In response to US Department of Energy directives, Argonne National Laboratory (ANL) has developed a waste minimization plan aimed at reducing the amount of wastes at this national research and development laboratory. Activities at ANL are primarily research- oriented and as such affect the amount and type of source reduction that can be achieved at this facility. The objective of ANL's waste minimization program is to cost-effectively reduce all types of wastes, including hazardous, mixed, radioactive, and nonhazardous wastes. The ANL Waste Minimization Plan uses a waste minimization audit as a systematic procedure to determine opportunities to reduce or eliminate waste. To facilitate these audits, a computerized bar-coding procedure is being implemented at ANL to track hazardous wastes from where they are generated to their ultimate disposal. This paper describes the development of the ANL Waste Minimization Plan and a pilot demonstration of the how the ANL Plan audited the hazardous waste generated within a selected divisions of ANL. It includes quantitative data on the generation and disposal of hazardous waste at ANL and describes potential ways to minimize hazardous wastes. 2 refs., 5 figs., 8 tabs

  7. Uranium removal from soils: An overview from the Uranium in Soils Integrated Demonstration program

    International Nuclear Information System (INIS)

    Francis, C.W.; Brainard, J.R.; York, D.A.; Chaiko, D.J.; Matthern, G.

    1994-01-01

    An integrated approach to remove uranium from uranium-contaminated soils is being conducted by four of the US Department of Energy national laboratories. In this approach, managed through the Uranium in Soils Integrated Demonstration program at the Fernald Environmental Management Project, Fernald, Ohio, these laboratories are developing processes that selectively remove uranium from soil without seriously degrading the soil's physicochemical characteristics or generating waste that is difficult to manage or dispose of. These processes include traditional uranium extractions that use carbonate as well as some nontraditional extraction techniques that use citric acid and complex organic chelating agents such as naturally occurring microbial siderophores. A bench-scale engineering design for heap leaching; a process that uses carbonate leaching media shows that >90% of the uranium can be removed from the Fernald soils. Other work involves amending soils with cultures of sulfur and ferrous oxidizing microbes or cultures of fungi whose role is to generate mycorrhiza that excrete strong complexers for uranium. Aqueous biphasic extraction, a physical separation technology, is also being evaluated because of its ability to segregate fine particulate, a fundamental requirement for soils containing high levels of silt and clay. Interactions among participating scientists have produced some significant progress not only in evaluating the feasibility of uranium removal but also in understanding some important technical aspects of the task

  8. Radar Cross Section (RCS) Certification for Static and Dynamic RCS Measurement Facilities. Volume 2: DOD RCS Demonstration Program Results

    National Research Council Canada - National Science Library

    2001-01-01

    ...) 46 Test Group, in cooperation with the RCC/SMSG Radar Committee, the demonstration program described herein was entirely successful and should lay the groundwork for similar technical or laboratory...

  9. Postdoctoral Teaching of Geriatric Dentistry in U.S. Dental Schools.

    Science.gov (United States)

    Ettinger, Ronald L; Goettsche, Zachary S; Qian, Fang

    2017-10-01

    The aim of this study was to determine the number and size of postdoctoral teaching programs in geriatric dentistry in U.S. dental schools and other health professions educational institutions and those programs with Health Resources and Services Administration (HRSA) funding. In 2015, all 67 U.S. dental schools were contacted via email with a questionnaire to ask if they had a postdoctoral program in geriatric dentistry; if they did, they were asked to report the length and size of the program. Directors of all 16 HRSA-funded geriatric fellowships were also invited to participate in the survey. Fifty-six of the 67 (83.6%) dental schools and 15 of the 16 (93.8%) HRSA-funded programs completed the questionnaire. Postdoctoral geriatric dentistry programs were reported in 12 dental schools and six medical institutions, although only six programs were currently accepting fellows. The length of the programs was 12-36 months. The maximum number of residents in any program was ten. The oldest program was in Minnesota; it began in 1981. The newest program was beginning in 2017 at Boston University as a revised version of its previous HRSA-funded program. The loss of HRSA funding has had a major negative impact on the number of training programs. Future research is needed to determine how the loss of HRSA-funded programs has affected the availability of educators in geriatric dentistry for dental schools and the services provided to the geriatric community.

  10. Effectiveness of a publicly-funded demonstration program to promote management of dryland salinity.

    Science.gov (United States)

    Robertson, M J; Measham, T G; Batchelor, G; George, R; Kingwell, R; Hosking, K

    2009-07-01

    Community and catchment-based approaches to salinity management continue to attract interest in Australia. In one such approach, Catchment Demonstration Initiative (CDI) projects were established by the Western Australian (WA) Government in 2000 for targeted investment in large-scale catchment-based demonstrations of integrated salinity management practices. The aim was to promote a process for technically-informed salinity management by landholders. This paper offers an evaluation of the effectiveness of one CDI project in the central wheatbelt of WA, covering issues including: its role in fostering adoption of salinity management options, the role of research and the technical requirements for design and implementation of on-ground works, the role of monitoring and evaluation, the identification and measurement of public and private benefits, comparison and identification of the place and value of plant-based and engineering-based options, reliance on social processes and impacts of constraints on capacity, management of governance and administration requirements and an appreciation of the value of group-based approaches. A number of factors may reduce the effectiveness of CDI-type approaches in facilitating landholder action to address salinity, many of these are socially-based. Such approaches can create considerable demands on landholders, can be expensive (because of the planning and accountability required) on the basis of dollars per hectare impacted, and can be difficult to garner ownership from all involved. An additional problem could be that few community groups would have the capacity to run such programs and disseminate the new knowledge so that the CDI-type projects can impact outside the focus catchment. In common with many publicly-funded approaches to salinity, we found that direct benefits on public assets are smaller than planned and that results from science-based requirements of monitoring and evaluation have long lead times, causing farmers

  11. The Public Debate about the Recreation Fee Demonstration Program on the U.S. Nation Forests1

    Science.gov (United States)

    David N. Bengston; David P. Fan

    2000-01-01

    The Recreation Fee Demonstration Program (RFDP) is a pilot program authorized by Congress in 1996. The RFDP allows the U.S. Department of Agriculture Forest Service, and the United States Department of the Interior Park Service, Bureau of Land Management, and Fish and Wildlife Service to experiment with new or increased fees at up to 100 recreation sites per agency....

  12. The Intraoral Ultrasonography in Dentistry | Caglayan | Nigerian ...

    African Journals Online (AJOL)

    Intraoral USG is also used in dentistry for examining the salivary glands and ducts, as well as the mouth floor, the buccal, labial, and palatal mucosa, the tongue, periodontal tissues, and periapical lesions. The main purpose of this review is to provide detailed information about intraoral USG applications in dentistry.

  13. Regenerative Perspective in Modern Dentistry

    Directory of Open Access Journals (Sweden)

    Mihnea Ioan Nicolescu

    2016-04-01

    Full Text Available This review aims to trace the contour lines of regenerative dentistry, to offer an introductory overview on this emerging field to both dental students and practitioners. The crystallized depiction of the concept is a translational approach, connecting dental academics to scientific research and clinical utility. Therefore, this review begins by presenting the general features of regenerative medicine, and then gradually introduces the specific aspects of major dental subdomains, highlighting the progress achieved during the last years by scientific research and, in some cases, which has already been translated into clinical results. The distinct characteristics of stem cells and their microenvironment, together with their diversity in the oral cavity, are put into the context of research and clinical use. Examples of regenerative studies regarding endodontic and periodontal compartments, as well as hard (alveolar bone and soft (salivary glands related tissues, are presented to make the reader further acquainted with the topic. Instead of providing a conclusion, we will emphasize the importance for all dental community members, from young students to experienced dentists, of an early awareness rising regarding biomedical research progress in general and regenerative dentistry in particular.

  14. Dental traumatology: an orphan in pediatric dentistry?

    DEFF Research Database (Denmark)

    Andreasen, Jens Ove; Lauridsen, Eva; Daugaard-Jensen, Jette

    2009-01-01

    Traumatic dental injuries are very frequent during childhood and adolescence. In fact, 2 out of 3 children have suffered a traumatic dental injury before adulthood. This fact links dental traumatology to pediatric dentistry. Unfortunately, this is not reflected by active participation by pediatric...... dentists in acute treatment, follow-up, and research. To examine the status of pediatric dentistry in relation to dental trauma, a publication analysis was undertaken in 1980, 1990, 2000, and 2007 about trauma articles published in 4 pediatric journals: journal of Dentistry for Children, Pediatric...... Dentistry, The journal of Pedodontics, and the International journal of Pediatric Dentistry. This study shows an average publication rate of trauma articles of approximately 3 percent of all articles published and with no improvement in later decennia. If only clinical studies are considered (leaving out...

  15. Development of radiobiological dentistry in Russia

    International Nuclear Information System (INIS)

    Lidenbraten, L.D.

    1997-01-01

    History of the radiological dentistry progress in Russia from the first report on the application of biomedical radiography techniques to dental practice in Russia in 1901 is briefly described. The first special X-ray room was open in 1921 in Petrograd. First scientific papers and guides on the radiological dentistry made their appearance. The second period in the development of Russian radiological dentistry was connected with the World War 2 and wounds of maxillo-facial wounds. Postwar time is characterized by application of the novel techniques, wide range of scientific researches in the radiological dentistry. The modern history of radiological dentistry began from 1983 due to computerized tomography used in case of malignant tumors of maxilla and nose cavity

  16. 75 FR 27808 - Section 8 Housing Choice Voucher Program-Demonstration Project of Small Area Fair Market Rents in...

    Science.gov (United States)

    2010-05-18

    ... Voucher Program--Demonstration Project of Small Area Fair Market Rents in Certain Metropolitan Areas for.... ACTION: Notice of Demonstration Project of Small Area Fair Market Rents (FMRs) in Selected Metropolitan... topics related to small area FMRs, including how these small areas should be defined. Small area FMRs...

  17. SITE PROGRAM DEMONSTRATION ECO LOGIC INTERNATIONAL GAS-PHASE CHEMICAL REDUCTION PROCESS, BAY CITY, MICHIGAN TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The SITE Program funded a field demonstration to evaluate the Eco Logic Gas-Phase Chemical Reduction Process developed by ELI Eco Logic International Inc. (ELI), Ontario, Canada. The Demonstration took place at the Middleground Landfill in Bay City, Michigan using landfill wa...

  18. Using System Dynamics as an Evaluation Tool: Experience from a Demonstration Program

    Science.gov (United States)

    Fredericks, Kimberly A.; Deegan, Michael; Carman, Joanne G.

    2008-01-01

    Evaluators are often faced with many challenges in the design and implementation of a program's evaluation. Because programs are entangled in complex networks of structures and stakeholders, they can be challenging to understand, and they often pose issues of competing and conflicting goals. However, by using a systems mapping approach to…

  19. Reliability program plan for the Isotope Brayton Ground Demonstration System (phase I)

    International Nuclear Information System (INIS)

    1975-01-01

    The reliability and quality assurance organizational relationships, the methods to be used, the tasks to be completed, and the documentation to be published are presented. The total program is intended to provide the necessary reliability and quality assurance associated with the design, fabrication, and testing of the GDS. It is consistent with the general objectives of the ERDA Quality Assurance (QA) program requirements document ''SNS-1'' dated April 1972 and reliability program requirements document ''SNS-2'' dated 17 June 1974 but has been specifically modified for the GDS with the intent of establishing background data for the subsequent Phase II effort

  20. Organized dentistry as an agent for helping others: the leadership of Donna J. Rumberger.

    Science.gov (United States)

    Rule, James T; Bebeau, Muriel J

    2003-09-01

    Dr Donna Rumberger graduated from New York University College of Dentistry in 1980 and has practiced dentistry in Manhattan ever since. Even before her graduation, she was active in organized dentistry, always viewing it as a conduit for helping other people. Working with the American Association of Women Dentists, she was cofounder of the Smiles for Success Foundation, a program started in New York City that helps women advance from welfare into the workforce with restored, healthy smiles. That program now has expanded to 14 other cities. Working with organized dentistry in New York City, she has been instrumental in initiating and running the Skate Safe program, which provides mouthguards and oral home care education for inner city children in Harlem. In addition, she has worked with the dentistry merit badge program for the Boy Scouts of America Jamborees, helped coalesce women's dental organizations in New York City, and led her dental society to collaborate with Columbia University in a program to improve access to dental care. As further evidence of her ability to get things done, she also has served as president of the American Association of Women Dentists, the Midtown Dental Society, and the New York County Dental Society--one of the largest dental societies in the country.

  1. 77 FR 11677 - Medicaid Program; Review and Approval Process for Section 1115 Demonstrations

    Science.gov (United States)

    2012-02-27

    ... for Medicare & Medicaid Services 42 CFR Part 431 Department of the Treasury 31 CFR Part 33 Department of Health and Human Services 45 CFR Part 155 Medicaid Program; Review and Approval Process for... Regulations#0;#0; [[Page 11678

  2. Demonstrating and Communicating Research Impact. Preparing NIOSH Programs for External Review

    Science.gov (United States)

    2009-01-01

    and Communicating Research Impact Type Program NIOSH cross-sector (continued) Traumatic Injury Work Organization and Stress-Related Disorders Worklife ...tools, such as italics, bolded text, dashed lines, and colors, can be used to indicate subtle differences. However, finding the balance between the... balancing the potential value and risk of individual programs within a portfolio against an explicitly defined set of goals. There are several methods

  3. Demonstration of SLUMIS: a clinical database and management information system for a multi organ transplant program.

    OpenAIRE

    Kurtz, M.; Bennett, T.; Garvin, P.; Manuel, F.; Williams, M.; Langreder, S.

    1991-01-01

    Because of the rapid evolution of the heart, heart/lung, liver, kidney and kidney/pancreas transplant programs at our institution, and because of a lack of an existing comprehensive database, we were required to develop a computerized management information system capable of supporting both clinical and research requirements of a multifaceted transplant program. SLUMIS (ST. LOUIS UNIVERSITY MULTI-ORGAN INFORMATION SYSTEM) was developed for the following reasons: 1) to comply with the reportin...

  4. Commercialization strategy for the Department of Energy's Solar Buildings Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    Efforts reported include: conducting a survey of existing commercial demonstration projects, categorizing these projects, determining criteria for evaluating the feasibility of continuing/aborting demonstration projects, and applying the criteria and making recommendations for which projects to continue and abort. It is recommended to refurbish 114 of the projects examined and to abandon 41. (LEW)

  5. The electronic journal for dentistry.

    Science.gov (United States)

    Makinson, O F; Haynes, T R; Kirkwood, I D

    1989-03-01

    Electronic publishing is expanding very rapidly and will soon substitute in part for the traditional role of paper and printing in accessing information and in its library storage. This change is occurring now for medicine and engineering. For dentistry the compact disc (CD-ROM) would have advantages over tape or on-line computer systems; one or two discs a year could hold all current dental journal and textbook literature. The setting of standards is the key to the successful introduction of this technology through production and playback systems. Indexing, retrieval and hardware are considered as well as copyright problems. The profession has the chance to guide the introduction of this publishing system in preference to it being fragmented between multiple publishers and thereby becoming costly. A proposal is offered which includes the nexus of traditional printing with this new publishing form through a forum for considering standards and goals for agreement on principles.

  6. Applications of ultrasound in dentistry.

    Science.gov (United States)

    Walmsley, A D

    1988-01-01

    An ultrasonic descaler working at kHz frequencies is used in dentistry to remove attached deposits from the teeth. Such devices offer many advantages over conventional hand instruments by reducing both the work and time involved in the clinical descaling process. Although it is a recognised clinical instrument, there has been little attempt to standardise its acoustic power output. A parameter which may characterise adequately the acoustic emission from these instruments is the displacement amplitude of the probe tip. Modification of the ultrasonic descaler generator has led to the further use of the instrument in other dental areas. Diagnostic applications of MHz ultrasound is limited by the structure and arrangement of the dental tissues. Therapeutic ultrasound has been used to treat a variety of dentally related ailments, and ultrasonic cleaning baths are used to clean both dental instruments and materials.

  7. The Clean Coal Technology Program 100 MWe demonstration of gas suspension absorption for flue gas desulfurization

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, F.E.; Hedenhag, J.G. [AirPol Inc., Teterboro, NJ (United States); Marchant, S.K.; Pukanic, G.W. [Dept. of Energy, Pittsburgh, PA (United States). Pittsburgh Energy Technology Center; Norwood, V.M.; Burnett, T.A. [Tennessee Valley Authority, Chattanooga, TN (United States)

    1997-12-31

    AirPol Inc., with the cooperation of the Tennessee Valley Authority (TVA) under a Cooperative Agreement with the United States Department of Energy, installed and tested a 10 MWe Gas Suspension Absorption (GSA) Demonstration system at TVA`s Shawnee Fossil Plant near Paducah, Kentucky. This low-cost retrofit project demonstrated that the GSA system can remove more than 90% of the sulfur dioxide from high-sulfur coal-fired flue gas, while achieving a relatively high utilization of reagent lime. This paper presents a detailed technical description of the Clean Coal Technology demonstration project. Test results and data analysis from the preliminary testing, factorial tests, air toxics texts, 28-day continuous demonstration run of GSA/electrostatic precipitator (ESP), and 14-day continuous demonstration run of GSA/pulse jet baghouse (PJBH) are also discussed within this paper.

  8. Demonstration of advanced combustion NO(sub X) control techniques for a wall-fired boiler. Project performance summary, Clean Coal Technology Demonstration Program

    International Nuclear Information System (INIS)

    None

    2001-01-01

    The project represents a landmark assessment of the potential of low-NO(sub x) burners, advanced overtire air, and neural-network control systems to reduce NO(sub x) emissions within the bounds of acceptable dry-bottom, wall-fired boiler performance. Such boilers were targeted under the Clean Air Act Amendments of 1990 (CAAA). Testing provided valuable input to the Environmental Protection Agency ruling issued in March 1994, which set NO(sub x) emission limits for ''Group 1'' wall-fired boilers at 0.5 lb/10(sup 6) Btu to be met by January 1996. The resultant comprehensive database served to assist utilities in effectively implementing CAAA compliance. The project is part of the U.S. Department of Energy's Clean Coal Technology Demonstration Program established to address energy and environmental concerns related to coal use. Five nationally competed solicitations sought cost-shared partnerships with industry to accelerate commercialization of the most advanced coal-based power generation and pollution control technologies. The Program, valued at over$5 billion, has leveraged federal funding twofold through the resultant partnerships encompassing utilities, technology developers, state governments, and research organizations. This project was one of 16 selected in May 1988 from 55 proposals submitted in response to the Program's second solicitation. Southern Company Services, Inc. (SCS) conducted a comprehensive evaluation of the effects of Foster Wheeler Energy Corporation's (FWEC) advanced overfire air (AOFA), low-NO(sub x) burners (LNB), and LNB/AOFA on wall-fired boiler NO(sub x) emissions and other combustion parameters. SCS also evaluated the effectiveness of an advanced on-line optimization system, the Generic NO(sub x) Control Intelligent System (GNOCIS). Over a six-year period, SCS carried out testing at Georgia Power Company's 500-MWe Plant Hammond Unit 4 in Coosa, Georgia. Tests proceeded in a logical sequence using rigorous statistical analyses to

  9. Gene therapy in dentistry: tool of genetic engineering. Revisited.

    Science.gov (United States)

    Gupta, Khushboo; Singh, Saurabh; Garg, Kavita Nitish

    2015-03-01

    Advances in biotechnology have brought gene therapy to the forefront of medical research. The concept of transferring genes to tissues for clinical applications has been discussed nearly half a century, but the ability to manipulate genetic material via recombinant DNA technology has brought this goal to reality. The feasibility of gene transfer was first demonstrated using tumour viruses. This led to development of viral and nonviral methods for the genetic modification of somatic cells. Applications of gene therapy to dental and oral problems illustrate the potential impact of this technology on dentistry. Preclinical trial results regarding the same have been very promising. In this review we will discuss methods, vectors involved, clinical implication in dentistry and scientific issues associated with gene therapy. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Green energy education programs and demonstrations at the Kortright Centre for Conservation. Paper no. IGEC-1-047

    International Nuclear Information System (INIS)

    Waters, A.

    2005-01-01

    In Ontario, when both professionals and non-professionals want to learn about sustainable technologies and practices they usually end up at the Kortright Centre For Conservation. Kortright has one of the largest educational programs in Canada dedicated to informing and inspiring people from all walks of life to think and act more sustainably. Our goals are to inform, to demonstrate and to promote green energy solutions. To these ends, Kortright has designed a number of successful programs for students and adults that provide both theoretical and hands on learning opportunities. Each year thousands of people trek to Kortright to participate in adult workshops and curriculum-based school programs. This paper and presentation will reveal some of the unique demonstrations and programming used by Kortright to motivate people to adopt more sustainable lifestyles. (author)

  11. Augmented reality in dentistry: a current perspective.

    Science.gov (United States)

    Kwon, Ho-Beom; Park, Young-Seok; Han, Jung-Suk

    2018-02-21

    Augmentation reality technology offers virtual information in addition to that of the real environment and thus opens new possibilities in various fields. The medical applications of augmentation reality are generally concentrated on surgery types, including neurosurgery, laparoscopic surgery and plastic surgery. Augmentation reality technology is also widely used in medical education and training. In dentistry, oral and maxillofacial surgery is the primary area of use, where dental implant placement and orthognathic surgery are the most frequent applications. Recent technological advancements are enabling new applications of restorative dentistry, orthodontics and endodontics. This review briefly summarizes the history, definitions, features, and components of augmented reality technology and discusses its applications and future perspectives in dentistry.

  12. Advances of Proteomic Sciences in Dentistry.

    Science.gov (United States)

    Khurshid, Zohaib; Zohaib, Sana; Najeeb, Shariq; Zafar, Muhammad Sohail; Rehman, Rabia; Rehman, Ihtesham Ur

    2016-05-13

    Applications of proteomics tools revolutionized various biomedical disciplines such as genetics, molecular biology, medicine, and dentistry. The aim of this review is to highlight the major milestones in proteomics in dentistry during the last fifteen years. Human oral cavity contains hard and soft tissues and various biofluids including saliva and crevicular fluid. Proteomics has brought revolution in dentistry by helping in the early diagnosis of various diseases identified by the detection of numerous biomarkers present in the oral fluids. This paper covers the role of proteomics tools for the analysis of oral tissues. In addition, dental materials proteomics and their future directions are discussed.

  13. Studies and research concerning BNFP: process monitoring and process surveillance demonstration program

    Energy Technology Data Exchange (ETDEWEB)

    Kight, H R

    1979-11-01

    Computerized methods of monitoring process functions and alarming off-standard conditions were implemented and demonstrated during the FY 1979 Uranium Run. In addition, prototype applications of instruments for the purpose of tamper indication and surveillance were tested.

  14. 20 CFR 404.1599 - Work incentive experiments and rehabilitation demonstration projects in the disability program.

    Science.gov (United States)

    2010-04-01

    ... the advantages and disadvantages of altering certain limitations and conditions that apply to title II... years from the start of the experiment or demonstration project). [48 FR 7575, Feb. 23, 1983, as amended...

  15. 75 FR 14582 - Office of Special Education and Rehabilitative Services-Special Demonstration Programs-Model...

    Science.gov (United States)

    2010-03-26

    ... DEPARTMENT OF EDUCATION Office of Special Education and Rehabilitative Services--Special... of Special Education and Rehabilitative Services, Department of Education. ACTION: Notice of proposed... for Special Education and Rehabilitative Services proposes a priority under the Special Demonstration...

  16. Cost-Effectiveness Analysis of Early Reading Programs: A Demonstration with Recommendations for Future Research

    Science.gov (United States)

    Hollands, Fiona M.; Kieffer, Michael J.; Shand, Robert; Pan, Yilin; Cheng, Henan; Levin, Henry M.

    2016-01-01

    We review the value of cost-effectiveness analysis for evaluation and decision making with respect to educational programs and discuss its application to early reading interventions. We describe the conditions for a rigorous cost-effectiveness analysis and illustrate the challenges of applying the method in practice, providing examples of programs…

  17. Wildfire ignition resistant home design(WIRHD) program: Full-scale testing and demonstration final report.

    Energy Technology Data Exchange (ETDEWEB)

    Quarles, Stephen, L.; Sindelar, Melissa

    2011-12-13

    The primary goal of the Wildfire ignition resistant home design(WIRHD) program was to develop a home evaluation tool that could assess the ignition potential of a structure subjected to wildfire exposures. This report describes the tests that were conducted, summarizes the results, and discusses the implications of these results with regard to the vulnerabilities to homes and buildings.

  18. Toyota/Skyline Technical Education Network. Cooperative Demonstration Program. Final Performance Report.

    Science.gov (United States)

    Skyline Coll., San Bruno, CA.

    A joint project was conducted between Toyota Motor Sales and Skyline College (in the San Francisco, California, area) to create an automotive technician training program that would serve the needs of working adults. During the project, a model high technology curriculum suitable for adults was developed, the quality of instruction available for…

  19. System safety program plan for the Isotope Brayton Ground Demonstration System (phase I)

    International Nuclear Information System (INIS)

    1976-01-01

    The safety engineering effort to be undertaken in achieving an acceptable level of safety in the Brayton Isotope Power System (BIPS) development program is discussed. The safety organizational relationships, the methods to be used, the tasks to be completed, and the documentation to be published are described. The plan will be updated periodically as the need arises

  20. A Peer-Assisted Learning Program and Its Effect on Student Skill Demonstration

    Science.gov (United States)

    Carr, W. David; Volberding, Jennifer; Vardiman, Phillip

    2011-01-01

    Objective: To explore the effect of an intentional Peer-Assisted Learning (PAL) program on peer-tutors and peer-tutees for performance on specific psychomotor skills. Design and Setting: Randomized, pretest-posttest experimental design. Participants: Undergraduate students (N = 69, 42 females and 27 males, all participants were 18 to 22 years old,…

  1. Demonstration of the Trauma Nurses Talk Tough seat belt diversion program in North Carolina.

    Science.gov (United States)

    2014-03-01

    Trauma Nurses Talk Tough is a seat belt diversion program originally developed at the Legacy Emanuel Hospital in Portland, Oregon, in 1988. Attendance at the course is a condition for a one-time dismissal of a seat belt citation without fine or court...

  2. Master of Engineering Energy Systems Engineering Program: Smart Campus Energy Systems Demonstration DE-SC0005523

    Energy Technology Data Exchange (ETDEWEB)

    Dodge, Martha [Lehigh Univ., Bethlehem, PA (United States); Coulter, John [Lehigh Univ., Bethlehem, PA (United States)

    2014-09-25

    Program Purpose and Position: The mission of the Master of Engineering in Energy Systems Engineering program is to invigorate the pipeline of new engineering graduates interested in energy oriented careers and thus produce a new generation of technical leaders for the energy and power industries. Over the next decade, nearly 50% of the skilled workers and technical leaders in the gas and electric utility industries will retire -- a much larger void than the current available and qualified professionals could fill [CEWD, 2012 survey]. The Masters of Engineering in Energy System Engineering program provides an opportunity for cross-discipline education for graduates interested in a career in the energy industry. It focuses on electric power and the challenges and opportunities to develop a sustainable, reliable and resilient system that meets human needs in an increasingly sustainable manner through the use of environmentally sound energy resources and delivery. Both graduates and employers benefit from a well-trained professional workforce that is ready to hit the road running and be immediately productive in meeting these challenges, through this innovative and unique program.

  3. RDandD Programme 2010. Programme for research, development and demonstration of methods for the management and disposal of nuclear waste; Fud-program 2010. Program foer forskning, utveckling och demonstration av metoder foer hantering och slutfoervaring av kaernavfall

    Energy Technology Data Exchange (ETDEWEB)

    2010-09-15

    The RD and D programme 2010 gives an account of SKB's plans for research, development and demonstration during the period 2011-2016. SKB's activities are divided into two main areas - the programme for Low and Intermediate Level Waste (the Loma program) and the Nuclear Fuel Program. The RD and D Programme 2010 consists of five parts: Part I: Overall Plan, Part II: Loma program, Part III: Nuclear Fuel Program, Part IV: Research on analysis of long-term safety, Part V: Social Science Research. The 2007 RD and D programme was focused primarily on technology development to realize the final repository for spent nuclear fuel. The actions described were aimed at increasing awareness of long-term safety and to obtain technical data for application under the Nuclear Activities Act for the final repository for spent fuel and under the Environmental Code of the repository system. Many important results from these efforts are reported in this program. An overall account of the results will be given in the Licensing application in early 2011. The authorities' review of RD and D programme in 2007 and completion of the program called for clarification of plans and programs for the final repository for short-lived radioactive waste, SFR, and the final repository for waste, SFL. This RD and D program describes these plans in a more detailed way

  4. Evaluation of waste treatment technologies by LLWDDD [Low-Level Waste Disposal Development and Demonstration] Programs

    International Nuclear Information System (INIS)

    Kennerly, J.M.; Williams, L.C.; Dole, L.R.; Genung, R.K.

    1987-01-01

    Waste treatments are divided into four categories: (1) volume reduction; (2) conditioning to improve waste form performance; (3) segregation to achieve waste reduction; and (4) separation to remove radioactive (or hazardous) constituents. Two waste treatment demonstrations are described. In the first, volume reduction by mechanical means was achieved during the supercompaction of 300 55-gal drums of solid waste at ORNL. In the second demonstration, conditioning of waste through immobilization and packaging to improve the performance of the waste form is being evaluated. The final section of this paper describes potential scenarios for the management of uranium-contaminated wastes at the Y-12 Plant in Oak Ridge and emphasizes where demonstrations of treatment technology will be needed to implement the scenarios. Separation and thermal treatment are identified as the principal means for treating these wastes. 15 figs

  5. Awareness, knowledge, and attitude of dentistry students in Kerman towards evidence-based dentistry

    Science.gov (United States)

    Sarani, Arezoo; Sarani, Melika; Abdar, Mohammad Esmaeli; Abdar, Zahra Esmaeili

    2016-01-01

    Introduction Evidence-based care helps dentists provide quality dental services to patients, and such care is based on the use of reliable information about treatment and patient care from a large number of papers, books, and published textbooks. This study aimed to determine the knowledge, awareness, and attitude of dentistry students towards evidence-based dentistry. Methods In this cross-sectional study, all dentistry students who were studying in their sixth semester and higher in the Kerman School of Dentistry (n = 73) were studied. The data were analyzed using SPSS version 17 and the independent-samples t-tests and the ANOVA test. Results The means of the students’ knowledge, awareness, and attitude scores were 29.2 ± 10.8, 29.9 ± 8.12 and 44.5 ± 5.3, respectively. Among demographic variables, only the number of semesters showed a significant difference with knowledge, awareness, and attitude of dentistry students toward evidence-based dentistry (p = 0.001). Conclusion According to the results of this study, knowledge and awareness of dentistry students at Kerman University of Medical Sciences towards evidence-based dentistry were average and have a neutral attitude. Thus, providing necessary training in this regard will cause promoting the knowledge, awareness, and improved attitudes of dentistry students. PMID:27382446

  6. The safety of bone allografts used in dentistry: a review.

    Science.gov (United States)

    Holtzclaw, Dan; Toscano, Nicholas; Eisenlohr, Lisa; Callan, Don

    2008-09-01

    Recent media reports concerning "stolen body parts" have shaken the public's trust in the safety of and the use of ethical practices involving human allografts. The authors provide a comprehensive review of the safety aspects of human bone allografts. The authors reviewed U.S. government regulations, industry standards, independent industry association guidelines, company guidelines and scientific articles related to the use of human bone allografts in the practice of dentistry published in the English language. The use of human bone allografts in the practice of dentistry involves the steps of procurement, processing, use and tracking. Rigorous donor screening and aseptic proprietary processing programs have rendered the use of human bone allografts safe and effective as a treatment option. When purchasing human bone allografts for the practice of dentistry, one should choose products accredited by the American Association of Tissue Banks for meeting uniformly high safety and quality control measures. Knowledge of human bone allograft procurement, processing, use and tracking procedures may allow dental clinicians to better educate their patients and address concerns about this valuable treatment option.

  7. Fast programming of peg-in-hole actions by human demonstration

    DEFF Research Database (Denmark)

    Yang, Yang; Lin, Linglong; Song, Y. T.

    2014-01-01

    Peg-in-Hole actions play an important role in industrial assembly. In this paper, we present a system which performs such actions after learning by human demonstration. Strategies for getting robust human-demonstrated PiH trajectories are investigated, and a number of PiH experiments are conducte...... to verify the performance of the proposed approach. The results show that our approach leads to a high PiH success rate and allows the robot to fine-tune the PiH trajectories to achieve faster performance....

  8. Nanotechnology and its Application in Dentistry

    African Journals Online (AJOL)

    Departments of Restorative Dentistry, College of Medicine, University of Ibadan, 1College of Health Sciences, .... control over nerve‑impulse traffic in any tooth that requires ... Nanoparticles have also been used as sterilizing solution in.

  9. POSTERS FOR WORKSHOP ON EPA’S ARSENIC REMOVAL DEMONSTRATION PROGRAM: RESULTS AND LESSONS LEARNED.

    Science.gov (United States)

    The Workshop included posters on 21 different arsenic demonstration projects. Each poster included information on raw water quality, cost of the system, a schematic of the layout of the system and several graphs and tables on the performance of the system for the removal of arsen...

  10. 76 FR 67154 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Program

    Science.gov (United States)

    2011-10-31

    ... to eight legacy Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration (demo) Project Plans resulting from section 1107(c) of the National Defense Authorization Act... flexibilities, modifying demo project plans, or executing Federal Register Notices has identified some areas for...

  11. Evidence-Based Dentistry in Everyday Practice.

    Science.gov (United States)

    Gudray, Kiran; Walmsley, Anthony Damien

    2016-12-01

    This article informs readers of a method of implementing evidence-based dentistry in practice. Following these steps, practitioners should be able to use this skill in an efficient manner. The importance of evidence-based dentistry and its relevance to situations encountered in everyday practice is also highlighted. Clinical relevance: This article highlights a series of steps to be followed by practitioners to ensure that treatment provided is supported by the most recent, good quality evidence.

  12. Adequação de recursos humanos ao PSF: percepção de formandos de dois modelos de formação acadêmica em odontologia The Family Health Program (FHP and human resources: perceptions of students from two different dentistry schools

    Directory of Open Access Journals (Sweden)

    Heriberto Fiúza Sanchez

    2008-04-01

    Full Text Available O Programa Saúde da Família - PSF foi instituído pelo governo federal objetivando reverter o modelo assistencial. Os recursos humanos envolvidos devem estar preparados para alcançar os objetivos que o PSF propõe. O propósito desse artigo foi avaliar os desejos, percepções e preparo de acadêmicos de Odontologia, em relação aos princípios do PSF, de duas diferentes Faculdades de Odontologia, aqui denominadas Faculdades 1 e 2. Buscou-se ainda analisar se as faculdades tiveram potencial transformador sobre os acadêmicos, graduando-os com compromisso social e sensibilidade humanitária, considerados importantes para aqueles que querem trabalhar no PSF. Questionários individuais foram aplicados por um único pesquisador. As respostas foram analisadas pelo programa Epi-Info. Os resultados mostraram que prevalece entre os acadêmicos o desejo de trabalhar no PSF por razões ligadas às dificuldades do mercado de trabalho e os mesmos citam freqüentemente a técnica como a principal característica necessária a um dentista para que o mesmo atue no PSF. Por outro lado, diferenças estatisticamente significativas foram encontradas entre os acadêmicos, apontando uma provável influência do Estágio Supervisionado, ministrado sob a forma de internato rural, sobre a formação do acadêmico da Faculdade 1, possivelmente habilitando-o melhor para o PSF.The purpose of this study was to evaluate the perceptions and opinions of dental students from two different Dentistry Schools in Brazil, both known here as Dentistry Schools 1 and 2 about the Family Health Program - FHP. The study analyzed if the Dentistry Schools had any influence on the students, graduating professionals with humanitarian and social sensibility, which are considered very important prerequisites for those who wish to work on this governmental health program, as well as searching for professional expectation of the students. Individual questionnaires were applied by only one

  13. A Demonstration Training Program for Potential School Dropouts. A Service Station Training School for Dropout-Prone Students.

    Science.gov (United States)

    Rull, Marvin H.; Moore, Richard O.

    One phase of the curriculum demonstration program sponsored jointly by the Quincy Public Schools and Southern Illinois University is the Service Station Training School described within this report. The Service Station Training School was one of several sheltered work stations which were developed to provide preemployment experiences and training…

  14. European demonstration program on the effect-based and chemical identification and monitoring of organic pollutants in European surface waters

    NARCIS (Netherlands)

    Tousova, Zuzana; Oswald, Peter; Slobodnik, Jaroslav; Blaha, Ludek; Muz, Melis; Hu, Meng; Brack, Werner; Krauss, Martin; Di Paolo, Carolina; Tarcai, Zsolt; Seiler, Thomas Benjamin; Hollert, Henner; Koprivica, Sanja; Ahel, Marijan; Schollée, Jennifer E.; Hollender, Juliane; Suter, Marc J.F.; Hidasi, Anita O.; Schirmer, Kristin; Sonavane, Manoj; Ait-Aissa, Selim; Creusot, Nicolas; Brion, Francois; Froment, Jean; Almeida, Ana Catarina; Thomas, Kevin; Tollefsen, Knut Erik; Tufi, Sara; Ouyang, Xiyu; Leonards, Pim; Lamoree, Marja; Torrens, Victoria Osorio; Kolkman, Annemieke; Schriks, Merijn; Spirhanzlova, Petra; Tindall, Andrew; Schulze, Tobias

    2017-01-01

    Growing concern about the adverse environmental and human health effects of a wide range of micropollutants requires the development of novel tools and approaches to enable holistic monitoring of their occurrence, fate and effects in the aquatic environment. A European-wide demonstration program

  15. Costs of Arsenic Removal Technologies for Small Water Systems: U.S. EPA Arsenic Removal Technology Demonstration Program

    Science.gov (United States)

    As part of the Arsenic Rule Implementation Research Program, between July 2003 and July 2011, the U.S. environmental Protection Agency (EPA) conducted 50 full-scale demonstration projects on treatment systems removing arsenic from drinking water in 26 states throughout the U.S. ...

  16. The Recreational Fee Demonstration Program on the national forests: and updated analysis of public attitudes and beliefs, 1996-2001.

    Science.gov (United States)

    David N. Bengston; David P. Fan

    2002-01-01

    Analyzes trends in favorable and unfavorable attitudes toward the Recreational Fee Demonstration Program (RFDP) in the national forests, updating an earlier study using computer content analysis of the public debate. About 65 percent of the attitudes toward the RFDP were favorable, comparable to the findings of survey research.

  17. Color difference thresholds in dentistry.

    Science.gov (United States)

    Paravina, Rade D; Ghinea, Razvan; Herrera, Luis J; Bona, Alvaro D; Igiel, Christopher; Linninger, Mercedes; Sakai, Maiko; Takahashi, Hidekazu; Tashkandi, Esam; Perez, Maria del Mar

    2015-01-01

    interpret visual and instrumental findings in clinical dentistry, dental research, and subsequent standardization. The importance of quality control in dentistry is reinforced by increased esthetic demands of patients and dental professionals. © 2015 Wiley Periodicals, Inc.

  18. Overview about the fuel cell bus demonstration programs CUTE, ECTOS and STEP

    International Nuclear Information System (INIS)

    Faltenbacher, M.; Fischer, M.; Eyerer, P.; Binder, M.; Schuckert, M.

    2004-01-01

    'Full text:' The paper will give an overview about the CUTE, ECTOS and STEP projects. The aim of the projects is to develop and demonstrate a emission-free and low-noise transport system, including the accompanying energy infrastructure, which has great potential for reducing the global greenhouse effect according to the Kyoto protocol, improving the quality of the atmosphere and life in densely populated areas and conserving fossil resources. For this purpose the application of the innovative hydrogen-based fuel cell technology is established by using fuel cell powered buses in an urban environment together with novel hydrogen production and support systems as part of a European Union wide demonstration scheme. The project demonstrates also to European Society the availability of the FC technology as a safe and reliable transportation technology. The major objectives are as follows: Demonstration of more than 20 fuel cell powered regular service buses over a period of two years in several European inner city areas to illustrate the different operating conditions to be found in Europe; Design, construction and operation of the necessary infrastructure for hydrogen production, including the required refuelling stations; Collection of findings concerning the construction and operating behaviour of hydrogen production for mobile use, and exchange of experiences including bus operation under differing conditions among the numerous participating companies; and, the research work of IKP and PE comprises the ecological analysis of the entire life cycle and comparison with conventional alternatives (diesel driven buses, CNG-buses). It also includes the economical analysis of the hydrogen infrastructure. First experiences from CUTE and ECTOS were presented. (author)

  19. Mixed Waste Focus Area alternative oxidation technologies development and demonstration program

    International Nuclear Information System (INIS)

    Borduin, L.C.; Fewell, T.; Gombert, D.; Priebe, S.

    1998-01-01

    The Mixed Waste Focus Area (MWFA) is currently supporting the development and demonstration of several alternative oxidation technology (AOT) processes for treatment of combustible mixed low-level wastes. The impetus for this support derives from regulatory and political hurdles frequently encountered by traditional thermal techniques, primarily incinerators. AOTs have been defined as technologies that destroy organic material without using open-flame reactions. Whether thermal or nonthermal, the processes have the potential advantages of relatively low-volume gaseous emissions, generation of few or no dioxin/furan compounds, and operation at low enough temperatures that metals (except mercury) and most radionuclides are not volatilized. Technology development and demonstration are needed to confirm and realize the potential of AOTs and to compare them on an equal basis with their fully demonstrated thermal counterparts. AOTs include both thermal and nonthermal processes that oxidize organic wastes but operate under significantly different physical and chemical conditions than incinerators. Nonthermal processes currently being studied include Delphi DETOX and acid digestion at the Savannah River Site, and direct chemical oxidation at Lawrence Livermore National Laboratory. All three technologies are at advanced stages of development or are entering the demonstration phase. Nonflame thermal processes include catalytic chemical oxidation, which is being developed and deployed at Lawrence Berkeley National Laboratory, and team reforming, a commercial process being supported by Department of Energy. Related technologies include two low-flow, secondary oxidation processes (Phoenix and Thermatrix units) that have been tested at MSE, Inc., in Butte, Montana. Although testing is complete on some AOT technologies, most require additional support to complete some or all of the identified development objectives. Brief descriptions, status, and planned paths forward for each

  20. Possible stakeholder concerns regarding volatile organic compound in arid soils integrated demonstration technologies not evaluated in the stakeholder involvement program

    International Nuclear Information System (INIS)

    Peterson, T.

    1995-12-01

    The Volatile Organic Compounds in Arid Soils Integrated Demonstration (VOC-Arid ID) supported the demonstration of a number of innovative technologies, not all of which were evaluated in the integrated demonstration's stakeholder involvement program. These technologies have been organized into two categories and the first category ranked in order of priority according to interest in the evaluation of the technology. The purpose of this report is to present issues stakeholders would likely raise concerning each of the technologies in light of commentary, insights, data requirements, concerns, and recommendations offered during the VOC-Arid ID's three-year stakeholder involvement, technology evaluation program. A secondary purpose is to provide a closeout status for each of the technologies associated with the VOC-Arid ID. This report concludes with a summary of concerns and requirements that stakeholders have for all innovative technologies

  1. The Effects of a Demonstration School Program on Nuclear Energy for Elementary School Students in Korea

    International Nuclear Information System (INIS)

    Han, EunOk; Lee, Seung Koo; Choi, Yoon Seok

    2016-01-01

    Advancing nuclear energy and radiation technology to drive the country forward should be based on the understanding and acceptance of the public. Korea has provided numerous types of information to increase public acceptance of nuclear energy, but it has been difficult to change adults’ perceptions and increase their acceptance of nuclear energy. As a result, social costs are rising. After a pilot program of 13 classes on understanding nuclear energy and radiation offered to elementary school students, who were expected to easily change their perceptions and to experience a relatively greater educational effect, this study analyzed changes to knowledge, attitudes, and behaviors regarding nuclear energy. In addition, this program was the first curriculum of its kind used as a step to lay the groundwork for offering it nationally in the free semester system. Therefore, the study analyzed its appropriateness to educational purposes. A lack of research and practice on communication strategies could be responsible for the situation in Korea of low support for nuclear energy because Korea does not have public understanding even though it is a nuclear energy exporter. If Korea implemented strategic communications from this point, such efforts could reduce unnecessary social costs

  2. The Effects of a Demonstration School Program on Nuclear Energy for Elementary School Students in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Han, EunOk; Lee, Seung Koo; Choi, Yoon Seok [Korea Academy of Nuclear Safety, Seoul (Korea, Republic of)

    2016-10-15

    Advancing nuclear energy and radiation technology to drive the country forward should be based on the understanding and acceptance of the public. Korea has provided numerous types of information to increase public acceptance of nuclear energy, but it has been difficult to change adults’ perceptions and increase their acceptance of nuclear energy. As a result, social costs are rising. After a pilot program of 13 classes on understanding nuclear energy and radiation offered to elementary school students, who were expected to easily change their perceptions and to experience a relatively greater educational effect, this study analyzed changes to knowledge, attitudes, and behaviors regarding nuclear energy. In addition, this program was the first curriculum of its kind used as a step to lay the groundwork for offering it nationally in the free semester system. Therefore, the study analyzed its appropriateness to educational purposes. A lack of research and practice on communication strategies could be responsible for the situation in Korea of low support for nuclear energy because Korea does not have public understanding even though it is a nuclear energy exporter. If Korea implemented strategic communications from this point, such efforts could reduce unnecessary social costs.

  3. Water Hammer Simulations of MMH Propellant - New Capability Demonstration of the Generalized Fluid Flow Simulation Program

    Science.gov (United States)

    Burkhardt, Z.; Ramachandran, N.; Majumdar, A.

    2017-01-01

    Fluid Transient analysis is important for the design of spacecraft propulsion system to ensure structural stability of the system in the event of sudden closing or opening of the valve. Generalized Fluid System Simulation Program (GFSSP), a general purpose flow network code developed at NASA/MSFC is capable of simulating pressure surge due to sudden opening or closing of valve when thermodynamic properties of real fluid are available for the entire range of simulation. Specifically GFSSP needs an accurate representation of pressure-density relationship in order to predict pressure surge during a fluid transient. Unfortunately, the available thermodynamic property programs such as REFPROP, GASP or GASPAK does not provide the thermodynamic properties of Monomethylhydrazine (MMH). This paper will illustrate the process used for building a customized table of properties of state variables from available properties and speed of sound that is required by GFSSP for simulation. Good agreement was found between the simulations and measured data. This method can be adopted for modeling flow networks and systems with other fluids whose properties are not known in detail in order to obtain general technical insight. Rigorous code validation of this approach will be done and reported at a future date.

  4. Intranasal sedatives in pediatric dentistry

    Science.gov (United States)

    AlSarheed, Maha A.

    2016-01-01

    Objectives: To identify the intranasal (IN) sedatives used to achieve conscious sedation during dental procedures amongst children. Methods: A literature review was conducted by identifying relevant studies through searches on Medline. Search included IN of midazolam, ketamine, sufentanil, dexmedetomidine, clonidine, haloperidol and loranzepam. Studies included were conducted amongst individuals below 18 years, published in English, and were not restricted by year. Exclusion criteria were articles that did not focus on pediatric dentistry. Results: Twenty studies were included. The most commonly used sedatives were midazolam, followed by ketamine and sufentanil. Onset of action for IN midazolam was 5-15 minutes (min), however, IN ketamine was faster (mean 5.74 min), while both IN sufentanil (mean 20 min) and IN dexmedetomidine (mean 25 min) were slow in comparison. Midazolam was effective for modifying behavior in mild to moderately anxious children, however, for more invasive or prolonged procedures, stronger sedatives, such as IN ketamine, IN sufentanil were recommended. In addition, ketamine fared better in overall success rate (89%) when compared with IN midazolam (69%). Intranasal dexmedetomidine was only used as pre-medication amongst children. While its’ onset of action is longer when compared with IN midazolam, it produced deeper sedation at the time of separation from the parent and at the time of anesthesia induction. Conclusion: Intranasal midazolam, ketamine and sufentanil are effective and safe for conscious sedation, while intranasal midazolam, dexmedetomidine and sufentanil have proven to be effective premedications. PMID:27570849

  5. Measuring the Effectiveness of the Apparel Advanced Manufacturing Demonstration Program. Appendices B-E

    Science.gov (United States)

    1990-12-30

    reh~exide Cen ter Georgia Institute of Technolo Southern Collge of Tecbnolog’ I eogiaiecn I OEMC INS=I~f No. 6 ’AMTC~’ I#. Save Money By Repairing Air...with a company’s physical and apparel industry, the architecture should be developed first. human resources I l. Computer-Integrated Manufacturing I I...demonstration center, ex. ence Technology - grants to de- Research projects in the physics , pected to -open In mid or late velop an automated antenna

  6. Recovery Act - LADWP Smart Grid Regional Demonstration Program Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Chiu, Sungly [Los Angeles Department of Water and Power, CA (United States); Vohra, Surendra [Los Angeles Department of Water and Power, CA (United States); Abdelshehid, Emil [Los Angeles Department of Water and Power, CA (United States); Szucs, David G. [National Energy Technology Lab. (NETL), Albany, OR (United States)

    2016-09-30

    LADWP collaborated with its project partners to carry out this demonstration in the designated areas to include two university campuses – the University of California, Los Angeles (UCLA) and the University of Southern California (USC) – surrounding neighborhoods, City of Los Angeles facilities, and LADWP power system test labs. The last project partner, Jet Propulsion Laboratory (JPL) was responsible for the cyber security aspects of the project. The program’s use cases provided insightful information to understand triggers for customers, distributors, and generators to adapt their behavior which aid in reducing system demands and costs, increasing energy efficiency, and increasing grid reliability.

  7. Dental pulp stem cells in regenerative dentistry.

    Science.gov (United States)

    Casagrande, Luciano; Cordeiro, Mabel M; Nör, Silvia A; Nör, Jacques E

    2011-01-01

    Stem cells constitute the source of differentiated cells for the generation of tissues during development, and for regeneration of tissues that are diseased or injured postnatally. In recent years, stem cell research has grown exponentially owing to the recognition that stem cell-based therapies have the potential to improve the life of patients with conditions that span from Alzheimer's disease to cardiac ischemia to bone or tooth loss. Growing evidence demonstrates that stem cells are primarily found in niches and that certain tissues contain more stem cells than others. Among these tissues, the dental pulp is considered a rich source of mesenchymal stem cells that are suitable for tissue engineering applications. It is known that dental pulp stem cells have the potential to differentiate into several cell types, including odontoblasts, neural progenitors, osteoblasts, chondrocytes, and adipocytes. The dental pulp stem cells are highly proliferative. This characteristic facilitates ex vivo expansion and enhances the translational potential of these cells. Notably, the dental pulp is arguably the most accessible source of postnatal stem cells. Collectively, the multipotency, high proliferation rates, and accessibility make the dental pulp an attractive source of mesenchymal stem cells for tissue regeneration. This review discusses fundamental concepts of stem cell biology and tissue engineering within the context of regenerative dentistry.

  8. Office of Technology Development Program for Research, Development, Demonstration, Testing, and Evaluation

    International Nuclear Information System (INIS)

    1993-10-01

    DOE has set a goal to clean up its complex and to bring all sites into compliance with applicable environmental regulations. This initiative is slated for completion by the year 2019. Four years ago there was no coordinated plan for identifying or cleaning these contaminated sites. Since 1989, DOE's Office of Environmental Restoration and Waste Management has invested time, money, and manpower to establish a wide range of programs to meet this immense challenge. DOE is responsible for waste management and clean up of more than 100 contaminated installations in 36 states and territories. This includes 3,700 sites: over 26,000 acres, with hazardous or radioactive contaminated surface or groundwater, soil, or structures; over 26,000 acres requiring remediation, with the number growing as new sites are defined; 500 surplus facilities awaiting decontamination and decommissioning and approximately 5,000 peripheral properties (residences, businesses) that have soil contaminated with uranium tailings

  9. Positive demonstration of initiatives under the voluntary climate change challenge program

    International Nuclear Information System (INIS)

    Keyes, J.; Hare, M.

    1997-01-01

    Reduction of greenhouse gas emissions that have built up over a century is a long-term challenge which requires long-term, sustainable solutions. The solutions include the increasing need for Canadians to use less carbon intensive fuels, such as natural gas. There are no economically and socially acceptable quick fixes that will produce dramatic results on a large scale. The endorsement of the Voluntary Climate Change Challenge and Registry Program (VCR) by the Canadian Gas Association (CGA), and subsequent approval of the Memorandum of Understanding, are indicative of commitments by the Association and its member companies to environmentally responsible actions and measures to ensure efficient energy usage. While CGA and members continue to reduce emissions, it must be recognized that significant progress will take time. Given the benefits of a long-term sustainable approach, the Voluntary Challenge represents the most logical way to proceed to reduce greenhouse gas emissions from Canadian sources without causing severe economic dislocation. (au) 26 refs

  10. [Specialties in dentistry. 4. Post-academic specialization in geriatric dentistry

    NARCIS (Netherlands)

    Schaub, R.M.; Baat, C. de

    2006-01-01

    In recent years, a specialization in geriatric dentistry has been established and along with it an educational programme. A specialist in geriatric dentistry is a dentist general practitioner with special knowledge and skills for delivering oral care to frail elderly people. The educational

  11. Specialties in dentistry. 4. Post-academic specialization in geriatric dentistry

    NARCIS (Netherlands)

    Schaub, R.M.; de Baat, C.

    2006-01-01

    In recent years, a specialization in geriatric dentistry has been established and along with it an educational programme. A specialist in geriatric dentistry is a dentist general practitioner with special knowledge and skills for delivering oral care to frail elderly people. The educational

  12. Waste management technology development and demonstration programs at Brookhaven National Laboratory

    Science.gov (United States)

    Kalb, Paul D.; Colombo, Peter

    1991-01-01

    Two thermoplastic processes for improved treatment of radioactive, hazardous, and mixed wastes were developed from bench scale through technology demonstration: polyethylene encapsulation and modified sulfur cement encapsulation. The steps required to bring technologies from the research and development stage through full scale implementation are described. Both systems result in durable waste forms that meet current Nuclear Regulatory Commission and Environmental Protection Agency regulatory criteria and provide significant improvements over conventional solidification systems such as hydraulic cement. For example, the polyethylene process can encapsulate up to 70 wt pct. nitrate salt, compared with a maximum of about 20 wt pct. for the best hydraulic cement formulation. Modified sulfur cement waste forms containing as much as 43 wt pct. incinerator fly ash were formulated, whereas the maximum quantity of this waste in hydraulic cement is 16 wt pct.

  13. Technical and administrative approach for the West Valley Demonstration Project Safety Program

    International Nuclear Information System (INIS)

    Newsom, P.C.; Roberts, C.J.; Yuchien Yuan; Marchetti, S.

    1987-06-01

    The principal objective of the West Valley Demonstration Project (WVDP) is to vitrify the 2.2 million liters of high-level radioactive waste (HLW) stored at the Western New York Nuclear Service Center (WNYNSC). This simple statement of purpose, however, does not convey a sense of the complexity of the undertaking. The vitrification task is not only complex in and of itself, but requires a myriad of other activities to be accomplished on an intricate and fast paced schedule in order to support it. The West Valley Demonstration Project Act (P.L 96-368), U.S. Department of Energy Order DOE-5481.1A, Idaho Operations Office Order ID-5481.1 and standard nuclear industry practice all require that proposed systems and operations involving hazards not routinely encountered by the general public be analyzed to identify potential hazards and consequences, and to assure that reasonable measures are taken to eliminate, control, or mitigate these potential consequences. Virtually every substantive aspect of the WVDP involves hazards beyond those routinely encountered and accepted by the general public. In order to assure the safety of the public and the workers at the WVDP, a system of hazard identification, categorization, analysis and review has been established. In parallel with this system, a procedure for developing the minimum design specifications and quality assurance requirements has been developed for Project systems, components, and structures which play a role in the safety of a specific major facility or the overall Project. 29 refs., 3 figs., 6 tabs

  14. EPA program to demonstrate mitigation measures for indoor radon: initial results

    International Nuclear Information System (INIS)

    Henschel, D.B.; Scott, A.G.

    1986-01-01

    EPA has installed radon mitigation techniques in 18 concrete block basement homes in the Reading Prong region of eastern Pennsylvania. Three alternative active soil ventilation approaches were tested: suction on the void network within the concrete block basement walls; suction on the footing drain tile system; and suction on the aggregate underneath the concrete slab. The initial 18 mitigation installations were designed to demonstrate techniques which would have low to moderate installation and operating costs. Where effective closure of major openings in the block walls is possible, suction on the wall voids has proved to be extremely effective, able to reduce homes having very high radon Working Levels (up to 7 WL) to 0.02 WL and less. However, where inaccessible major openings are concealed within the wall, it is more difficult and/or more expensive to develop adequate suction on the void network, and performance is reduced. Testing is continuing to demonstrate the steps required to achieve high performance with wall suction in homes with such difficult-to close walls. Drain tile suction can be very effective where the drain tiles completely surround the home; drain tile suction is the least expensive and most aesthetic of the active soil ventilation approaches, but appears susceptible to spikes in radon levels when the basement is depressurized. Sub-slab suction as tested in this study - with one or two individual suction points in the slab - does not appear adequate to ensure sustained high levels of reduction on block wall basement homes; it appears to effectively treat slab-related soil gas entry routes so long as a uniform layer of aggregate is present, but it does not appear to effectively treat the wall-related entry routes. Closure of major openings might have improved sub-slab suction performance. 5 figures, 3 tables

  15. Identification of sites for the low-level waste disposal development and demonstration program

    International Nuclear Information System (INIS)

    Ketelle, R.H.; Lee, D.W.

    1988-04-01

    This report presents the results of site selection studies for potential low-level radioactive waste disposal sites on the Oak Ridge Reservation (ORR). Summaries of the site selection procedures used and results of previous site selection studies on the ORR are included. This report includes recommendations of sites for demonstration of shallow land burial using engineered trench designs and demonstration of above-grade disposal using design concepts similar to those used in tumulus disposal. The site selection study, like its predecessor (ORNL/TM-9717, Use of DOE Site Selection Criteria for Screening Low-Level Waste Disposal Sites on the Oak Ridge Reservation), involved application of exclusionary site screening criteria to the region of interest to eliminate unacceptable areas from consideration. Also like the previous study, the region of interest for this study was limited to the Oak Ridge Department of Energy Reservation. Reconnaissance-level environmental data were used in the study, and field inspections of candidate sites were made to verify the available reconnaissance data. Five candidate sites, all underlain by Knox dolomite residuum and bedrock, were identified for possible development of shallow land burial facilities. Of the five candidate sites, the West Chestnut site was judged to be best suited for deployment of the shallow land burial technology. Three candidate sites, all underlain by the Conasauga Group in Bear Creek Valley, were identified for possible development of above-grade disposal technologies. Of the three sites identified, the Central Bear Creek Valley site lying between State Route 95 and Gum Hollow Road was ranked most favorable for deployment of the above-grade disposal technology

  16. [Dentistry students' reasons for choosing dentistry as a career in Damascus University].

    Science.gov (United States)

    Mashlah, A M

    2012-05-01

    This cross-sectional questionnaire survey assessed the motives for choosing dentist as a profession among dentistry students at Damascus University, Syrian Arab Republic. A total of 408 undergraduate students (233 males and 175 females) aged 18-23 years were selected randomly from students in the second, third and fourth years of dentistry study. They completed a questionnaire that enquired about their reasons for studying dentistry as well as their sociodemographic characteristics. The number of admissions in females had increased over the 3 years. Most parents of the students were university-educated. The main motivation for choosing dentistry was as a means to achieve personal goals, including getting a good job abroad, having financial independence, and attaining a good reputation. There were significant differences between the sexes with regard to the reasons for choosing dentistry.

  17. Green dentistry, a metamorphosis towards an eco-friendly dentistry: a short communication.

    Science.gov (United States)

    Rastogi, Varun; Sharma, Rachna; Yadav, Lalita; Satpute, Pranali; Sharma, Vandana

    2014-07-01

    Dentistry is most importantly and foremost a healing profession. In today's world, it is very necessary to understand the importance of being eco-friendly in every facet of our lives, including dental practice which has a huge impact on the environment due to the large amount of metallic waste generated by various dental procedures along with excessive use of water and electricity, which specifically emphasis the thrust to move towards 'Green dentistry'. Green dentistry is an innovative way of dental practice which is environment friendly and at the same time conserves money and time by reducing waste, conserving energy and decreasing pollution with the use of latest techniques and procedures. Green dentistry therefore, protects the environment and mankind from the hazards of rapid urbanisation in developing countries. The authors wish to emphasize the practice of eco-friendly, green dentistry in a developing country like India which needs to conserve resources and curb environmental pollution.

  18. Weaving the native web: using social network analysis to demonstrate the value of a minority career development program.

    Science.gov (United States)

    Buchwald, Dedra; Dick, Rhonda Wiegman

    2011-06-01

    American Indian and Alaska Native scientists are consistently among the most underrepresented minority groups in health research. The authors used social network analysis (SNA) to evaluate the Native Investigator Development Program (NIDP), a career development program for junior Native researchers established as a collaboration between the University of Washington and the University of Colorado Denver. The study focused on 29 trainees and mentors who participated in the NIDP. Data were collected on manuscripts and grant proposals produced by participants from 1998 to 2007. Information on authorship of manuscripts and collaborations on grant applications was used to conduct social network analyses with three measures of centrality and one measure of network reach. Both visual and quantitative analyses were performed. Participants in the NIDP collaborated on 106 manuscripts and 83 grant applications. Although three highly connected individuals, with critical and central roles in the program, accounted for much of the richness of the network, both current core faculty and "graduates" of the program were heavily involved in collaborations on manuscripts and grants. This study's innovative application of SNA demonstrates that collaborative relationships can be an important outcome of career development programs for minority investigators and that an analysis of these relationships can provide a more complete assessment of the value of such programs.

  19. Experimental and analytical study for demonstration program on shielding of casks for high-level wastes

    International Nuclear Information System (INIS)

    Ueki, K.; Nakazawa, M.; Hattorl, S.; Ozaki, S.; Tamaki, H.; Kadotani, H.; Ishizuka, T.; Ishikawa, S.

    1993-01-01

    The following remarks were obtained from the experiment and the DOT 3.5 and the MCNP analyses on the gamma ray and the neutron dose equivalent rates in the cask of interest. 1. The cask has thinner neutron shielding parts around the trunnions. Significant neutrons streaming around the trunnion parts was observed which was also cleared by the MCNP analysis for the 252 Cf source experiment. Accordingly, detailed neutron streaming calculations are required to evaluate the dose levels around the trunnions when loading the vitrified high-level wastes. 2. The room-scattered obstructive neutrons, mainly originating from the neutrons penetrating around the trunnions, at the top and the bottom of the cask are reduced significantly by preparing the water tank at the top and the water layer at the bottom. Therefore, a more accurate experiment is to be carried out in the future shielding experiment especially for neutrons. However, because the water tank and the layer do not exist in the actual high-level wastes transport cask, the experiment without the water tank and layer are not dispensable to demonstrate the transport conditions of the actual cask, too. 3. The gamma-ray and the neutron dose equivalent rate distributions obtained from the DOT 3.5 and the MCNP calculations, respectively, agreed closely with the measured values in the cask areas of interest. Accordingly, the DOT 3.5 code and the MCNP code with the NESX estimator can be employed not only for the shielding analysis of the future experiments, but also for making a safety analysis report of high-level wastes transport casks. (J.P.N.)

  20. Physical studies of transmutation scenarios. The Muse program with the Masurca facility: a step towards an hybrid demonstrator?

    International Nuclear Information System (INIS)

    Bouchard, J.; Leconte, Ph.; Doubre, H.; Bhatnagar, V.P.; Carbonnier, J.L.; Chawla, R.; Bernard, H.

    2002-01-01

    The Muse research program, which started in 1995, is a contribution to the development of a dedicated subcritical accelerator driven system (ADS) for the transmutation of minor actinides produced by conventional nuclear power plants. The Muse experiments aim at making a parametric study of different reactor core compositions with different subcritical levels and supplied by different sources in order to demonstrate that the measurement techniques and the calculation charts established for critical FBRs remain valid with an hybrid system. The 4. phase of the Muse program concerns the design, realization and installation of the Genepi (generator of intense pulse neutrons) deutons accelerator at the Masurca facility of Cadarache (France) for the understanding of the neutronic behaviour of an ADS, the definition of a reference calculation scheme, and the development of specific experimental techniques for dynamical measurements. This document brings together the presentations (transparencies) given at the SFEN technical meeting of May 30, 2002 about the Muse program. (J.S.)

  1. Evaluation of low-level radioactive waste characterization and classification programs of the West Valley Demonstration Project

    International Nuclear Information System (INIS)

    Taie, K.R.

    1994-01-01

    The West Valley Demonstration Project (WVDP) is preparing to upgrade their low-level radioactive waste (LLW) characterization and classification program. This thesis describes a survey study of three other DOE sites conducted in support of this effort. The LLW characterization/classification programs of Oak Ridge National Laboratory, Savannah River Site, and Idaho National Engineering Laboratory were critically evaluated. The evaluation was accomplished through tours of each site facility and personnel interviews. Comparative evaluation of the individual characterization/classification programs suggests the WVDP should purchase a real-time radiography unit and a passive/active neutron detection system, make additional mechanical modifications to the segmented gamma spectroscopy assay system, provide a separate building to house characterization equipment and perform assays away from waste storage, develop and document a new LLW characterization/classification methodology, and make use of the supercompactor owned by WVDP

  2. Evaluating Success of Pediatric Dentistry Department at Mashhad Dental School (Iran in Clinical Skills Education from Students’ Perspectives

    Directory of Open Access Journals (Sweden)

    Hosein Nematollahi

    Full Text Available Introduction: Periodic evaluation of educational programs provides insight into the course and teaching effectiveness. Effective evaluation provides valuable information, which contributes to both student’s and course success. The purpose of this study was to evaluate the success of pediatric dentistry department at Mashhad dental school in clinical education from students’ perspectives.Materials & Methods: This cross-sectional study was conducted on 116 fifth and sixth grade undergraduate dental students in pediatric dentistry at Mashhad dental school. A questionnaire including 21 multiple choice questions about 7 parts of clinical skills in pediatric dentistry was given to each student. Data were analyzed by Mann-Whitney in SPSS software. Results: According to the study results, among 7 different clinical skills in pediatric dentistry including: examination, behavior management, prevention, injection, restoration, pulp treatment and space management, the highest success rate of pediatric dentistry department was in prevention and injection and the lowest success rate in space management and behavior control. Furthermore, from the students’ perspective, male students compared to female students mentioned a higher rate of success in choosing the type of restoration material for pediatric dentistry department (P=0. 041. Conclusion: This study showed that the students’ self-reported clinical skills in different parts of pediatric dentistry has been adequate. Students reported a lack of confidence in “behavior management” and “space management” which warrants greater emphasis in the undergraduate curriculum.

  3. 42 CFR 62.8 - What does an individual have to do in return for the scholarship program award?

    Science.gov (United States)

    2010-10-01

    ... Service or as a Federal civilian in the full-time clinical practice of the participant's profession and (2... completion of the participant's course of study leading to a degree in medicine, osteopathy, dentistry, or an... National Research Service Award Program. (1) A Scholarship Program participant who demonstrates exceptional...

  4. Photodynamic therapy in dentistry: a literature review.

    Science.gov (United States)

    Gursoy, Hare; Ozcakir-Tomruk, Ceyda; Tanalp, Jale; Yilmaz, Selçuk

    2013-05-01

    The purpose of this review was to summarize recent developments regarding photodynamic therapy (PDT) in the field of dentistry. A review of pertinent literature was carried out in PubMED to determine the current position of PDT applications in dentistry. One hundred thirteen relevant articles were retrieved from PubMED by inserting the keywords "photodynamic therapy", "dentistry", "periodontology", "oral surgery", and "endodontics". It is anticipated that this overview will create a specific picture in the practitioner's mind regarding the current status and use of PDT. In spite of different results and suggestions brought about by different researchers, PDT can be considered as a promising and less invasive technique in dentistry. PDT seems to be an effective tool in the treatment of localized and superficial infections. Within the limitations of the present review, it can be concluded that although PDT cannot replace antimicrobial therapy at its current stage, it may be used as an adjunctive tool for facilitating the treatment of oral infections. Oral infections (such as mucosal and endodontic infections, periodontal diseases, caries, and peri-implantitis) are among the specific targets where PDT can be applied. Further long-term clinical studies are necessary in establishing a more specific place of the technique in the field of dentistry.

  5. History of Dentistry in Central Serbia

    Directory of Open Access Journals (Sweden)

    Jeremic Marko

    2016-11-01

    Full Text Available History of dentistry in the Central Serbian District of Jagodina has been influenced by traditional medicine for centuries. Development of dentistry in the region of Jagodina was slow, the level of oral and general hygiene was low and the sanitary prevention was absent. Trained physicians started to practice medicine and dentistry in the first half of the nineteenth century and they were educated in abroad universities. However, common people used to address to these physicians only when the traditional medicine were unable to help. Until the end of the World War II, common, mostly rural people, with the urgent dental treatment need were usually referred to the barbers, healers or empirics in the nearby villages rather than the dentists. Medications used for the urgent dental treatment were balsams and solutions made of herbs. After the World War II, the dental technicians who finished special courses started to practice dentistry. In 1947 the Regional Dental Office in Jagodina was opened and in 1955 the first Doctor of Dental Medicine who graduated from the School of Dental Medicine of University of Belgrade was employed. Nowadays, the Department of Dentistry represents is an important and independent part of the Health Care Centre in Jagodina.

  6. Sports dentistry: a perspective for the future

    Directory of Open Access Journals (Sweden)

    Paulo Vinícius Soares

    2014-04-01

    Full Text Available Sports Dentistry (SD acts in the prevention, maintenance and treatment of oral and facial injuries, as well as the collection and dissemination of information on dental trauma, beyond stimulus to research. Establishes as a duty for the dentist detect problems related to the athlete’s stomatognathic system. This essay is based on the provided data from the literature related to SD, including definition, practice areas and research fields. To discuss the data, six areas were categorized: shares in sports dentistry; oral health of athlete; sports-related dental implications; dental-facial trauma; face shields; and mouthguards. The analyzed data show that the SD is still an underexplored field of action by dentists, but it is expanding, despite not being recognized specialty by the Federal Council of Dentistry, but the Brazilian Academy of Sports Dentistry has been created with a mission to show the real importance of Dentistry in sport. The dentist should be part of the group of professionals associated with the athlete to perform periodic checks in order to ensure oral health which may contribute to athletes´performance. When impact occurs, however, it would be possible reduce the severity of the impact related to injuries, by using helmets, masks, goggles, face shields and mouthguard. Additionally, it is imperative that dentists, sports coaching, athletes, and professional who work with athletes be aware of the benefits of incorporating SD as an important academic and professional subject.

  7. Computer programs of information processing of nuclear physical methods as a demonstration material in studying nuclear physics and numerical methods

    Science.gov (United States)

    Bateev, A. B.; Filippov, V. P.

    2017-01-01

    The principle possibility of using computer program Univem MS for Mössbauer spectra fitting as a demonstration material at studying such disciplines as atomic and nuclear physics and numerical methods by students is shown in the article. This program is associated with nuclear-physical parameters such as isomer (or chemical) shift of nuclear energy level, interaction of nuclear quadrupole moment with electric field and of magnetic moment with surrounded magnetic field. The basic processing algorithm in such programs is the Least Square Method. The deviation of values of experimental points on spectra from the value of theoretical dependence is defined on concrete examples. This value is characterized in numerical methods as mean square deviation. The shape of theoretical lines in the program is defined by Gaussian and Lorentzian distributions. The visualization of the studied material on atomic and nuclear physics can be improved by similar programs of the Mössbauer spectroscopy, X-ray Fluorescence Analyzer or X-ray diffraction analysis.

  8. Interprofessional Collaborative Practice: How Could Dentistry Participate?

    Science.gov (United States)

    Cole, James R; Dodge, William W; Findley, John S; Horn, Bruce D; Kalkwarf, Kenneth L; Martin, Max M; Valachovic, Richard W; Winder, Ronald L; Young, Stephen K

    2018-05-01

    There is a remarkable phenomenon occurring among health professionals: the development of ongoing, routine collaboration, both in educating the next generation of providers and in delivering care. These new approaches, commonly referred to as interprofessional education and interprofessional collaborative practice, have been introduced into academic health settings and delivery systems throughout the U.S. and the rest of the world; however, the full integration of dentistry in health care teams remains unrealized. In academic settings, dentistry has found ways to collaborate with the other health professions, but most practicing dentists still find themselves on the margins of new models of care delivery. This article provides a perspective on the history and context of the evolution of collaborative approaches to health care and proposes ways in which dentistry can participate more fully in the future.

  9. Paediatric laser dentistry. Part 1: General introduction.

    Science.gov (United States)

    Caprioglio, C; Olivi, G; Genovese, M D

    2017-03-01

    Knowledge of the physical characteristics of different laser lights and optical and thermal properties of oral tissues is very important to understand the interaction of dental lasers with biological tissues. Choosing the correct dental laser is crucial to match specific wavelengths with target chromophores of different tissues; this affinity makes laser irradiation selective and therefore minimally invasive. Various types of lasers are used in dentistry, offering a viable alternative to low and high-speed handpieces and surgical blades, and also minimising fear and discomfort of the patient. Lasers can provide innovative and minimally invasive therapies in different branches of dentistry including preventive and restorative dentistry, traumatic injury treatments and surgical procedures. Laser has also biostimulating and anti-inflammatory effects, as well as analgesic effect.

  10. Recent advances in imaging technologies in dentistry

    Institute of Scientific and Technical Information of China (English)

    Naseem; Shah; Nikhil; Bansal; Ajay; Logani

    2014-01-01

    Dentistry has witnessed tremendous advances in all its branches over the past three decades. With these advances, the need for more precise diagnostic tools,specially imaging methods, have become mandatory.From the simple intra-oral periapical X-rays, advanced imaging techniques like computed tomography, cone beam computed tomography, magnetic resonance imaging and ultrasound have also found place in modern dentistry. Changing from analogue to digital radiography has not only made the process simpler and faster but also made image storage, manipulation(brightness/contrast, image cropping, etc.) and retrieval easier. The three-dimensional imaging has made the complex cranio-facial structures more accessible for examination and early and accurate diagnosis of deep seated lesions. This paper is to review current advances in imaging technology and their uses in different disciplines of dentistry.

  11. Plasma rich in growth factors in dentistry

    Directory of Open Access Journals (Sweden)

    Ana Glavina

    2017-06-01

    Full Text Available Background Plasma rich in growth factors (PRGF has wider use in many fields of dentistry due to its endogenous biocompatible regenerative potential i.e., their potential to stimulate and accelerate tissue healing and bone regeneration. Aims This review shows the increasing use of PRGF technology in various fields of dentistry. Methods In the last nine years PubMed has been searched in order to find out published articles upon PRGF in dentistry and 36 papers have been included. Results PRGF technology has many advantages with positive clinical and biological outcomes in tissue healing and bone regeneration. Conclusion In order to determine the most effective therapeutic value for patients, further research is required.

  12. Advances in Nanotechnology for Restorative Dentistry

    Science.gov (United States)

    Khurshid, Zohaib; Zafar, Muhammad; Qasim, Saad; Shahab, Sana; Naseem, Mustafa; AbuReqaiba, Ammar

    2015-01-01

    Rationalizing has become a new trend in the world of science and technology. Nanotechnology has ascended to become one of the most favorable technologies, and one which will change the application of materials in different fields. The quality of dental biomaterials has been improved by the emergence of nanotechnology. This technology manufactures materials with much better properties or by improving the properties of existing materials. The science of nanotechnology has become the most popular area of research, currently covering a broad range of applications in dentistry. This review describes the basic concept of nanomaterials, recent innovations in nanomaterials and their applications in restorative dentistry. Advances in nanotechnologies are paving the future of dentistry, and there are a plenty of hopes placed on nanomaterials in terms of improving the health care of dental patients. PMID:28787967

  13. Bioeconomy analysis in Aesthetic Dentistry

    Directory of Open Access Journals (Sweden)

    Andreea Dana Tudose

    2015-12-01

    technical report of treatment ( labor - price, average duration, satisfaction, relative to direct restoration techniques versus indirect techniques . In conclusion, SWOT analysis can be successfully applied to a better targeting of treatments, applying a plan lines for management in dental treatment units. None of direct techniques can not fit the bioeconomy principles (saves time, money, dental tissue in the short term. All maneuvers efficient in terms of functional aesthetics dentistry win at time saving and lost tooth structure chapter to the cost issue. In the long run costs can be amortized, especially since the restoration increases predictability.

  14. Nanotechnology in dentistry: prevention, diagnosis, and therapy

    Directory of Open Access Journals (Sweden)

    Abou Neel EA

    2015-10-01

    Full Text Available Ensanya Ali Abou Neel,1–3 Laurent Bozec,3 Roman A Perez,4,5 Hae-Won Kim,4–6 Jonathan C Knowles3,5 1Division of Biomaterials, Operative Dentistry Department, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia; 2Biomaterials Department, Faculty of Dentistry, Tanta University, Tanta, Egypt; 3UCL Eastman Dental Institute, Biomaterials and Tissue Engineering, London, UK; 4Institute of Tissue Regenerative Engineering (ITREN, 5Department of Nanobiomedical Science and BK21 Plus NBM Global Research Center for Regenerative Medicine, 6Department of Biomaterials Science, College of Dentistry, Dankook University, Cheonan, Republic of Korea Abstract: Nanotechnology has rapidly expanded into all areas of science; it offers significant alternative ways to solve scientific and medical questions and problems. In dentistry, nanotechnology has been exploited in the development of restorative materials with some significant success. This review discusses nanointerfaces that could compromise the longevity of dental restorations, and how nanotechnolgy has been employed to modify them for providing long-term successful restorations. It also focuses on some challenging areas in dentistry, eg, oral biofilm and cancers, and how nanotechnology overcomes these challenges. The recent advances in nanodentistry and innovations in oral health-related diagnostic, preventive, and therapeutic methods required to maintain and obtain perfect oral health, have been discussed. The recent advances in nanotechnology could hold promise in bringing a paradigm shift in dental field. Although there are numerous complex therapies being developed to treat many diseases, their clinical use requires careful consideration of the expense of synthesis and implementation. Keywords: nanotechnology, nanointerfaces, biofilm-related oral diseases, tissue engineering, drug delivery, toxicity

  15. The entrepreneurial role in primary care dentistry.

    Science.gov (United States)

    Willcocks, S

    2012-03-09

    This paper explores the entrepreneurial role of dentists in primary care dentistry. It reviews the changing context of dentistry, not least the reforms being introduced by the health and social care bill. It suggests that this new context will reinforce the need to consider the business side of dental practice, in particular, the importance of quality, creativity and innovation, alongside the importance of meeting the needs of patients. An entrepreneurial approach will be required in order to sustain dental practice in an increasingly competitive environment.

  16. Use of low fusing alloy in dentistry.

    Science.gov (United States)

    Wee, A G; Schneider, R L; Aquilino, S A

    1998-11-01

    Low fusing alloy has been used in dentistry for remount procedures in both fixed and removable prosthodontics, in implant prosthodontics for the fabrication of solid implant casts, in maxillofacial prosthetics as oral radiation shields, and in dental research for its unique properties. Previously, the use of low fusing alloy was thought to offer a high degree of dimensional accuracy. However, multiple in vitro studies have shown that its presumed dimensional accuracy may be questionable. This article reviews the physical properties, metallurgical considerations of low fusing alloy, its applications in dentistry, and a safe, simple method of using low fusing alloy.

  17. Errors in dentistry: a call for apology.

    Science.gov (United States)

    Schwartz, Barry

    2005-01-01

    Bad outcomes occur in dentistry and sometimes these are the results of dental errors. In both cases, this essay will argue that apologies are very important in maintaining a relationship with the patient that is based on trust and mutual respect. Nevertheless, apologies are often not forthcoming in dentistry for a number of reasons that deserve careful examination. In particular, the dentist's fear that an apology will increase the risk of legal harm will be critiqued. Ethical and psychological reasons for making an apology will be discussed, and strategies to assist clinicians in making an apology will be offered.

  18. The dental public health implications of cosmetic dentistry: a scoping review of the literature.

    Science.gov (United States)

    Doughty, J; Lala, R; Marshman, Z

    2016-09-01

    The popularity of cosmetic surgery has seen a rapid increase recently, with the trend mirrored in dentistry. The Department of Health expressed concerns about the potential for biological and psychosocial harm of these cosmetic procedures. Furthermore, the dental public health implications (DPH) of the growing uptake of cosmetic dental procedures have not been explored. Conduct a scoping review to explore the DPH implications of cosmetic dentistry and identify gaps for future research. A fivestage scoping review was conducted of studies identified using the search terms cosmetic AND dentistry. Data from the studies meeting the inclusion criteria were extracted, collated and summarised into themes. Fifty-seven papers met the inclusion criteria (11 cross-sectional studies, 10 literature reviews and 36 opinion pieces). The DPH implications were summarised into five emergent themes: dento-legal and ethical, marketing, psychosocial, biological and workforce. These themes revealed patients' increased expectations, expanding commercialisation of the profession, psychological risks to vulnerable patients, the iatrogenic consequences of invasive cosmetic dental procedures and workforce implications of the current trends. The scoping review found that existing literature on cosmetic dentistry is predominately anecdotal - professional opinions and discussions. Despite this, our findings demonstrated workforce training and governance implications due to increased demand for cosmetic dentistry. Further empirical research is needed to understand the DPH implications of the increasing demand and uptake of cosmetic dental procedures to guide evidence-based policy to safeguard patients and improve the quality of dental services. Copyright© 2016 Dennis Barber Ltd

  19. Selected applications for current polymers in prosthetic dentistry - state of the art.

    Science.gov (United States)

    Kawala, Maciej; Smardz, Joanna; Adamczyk, Lukasz; Grychowska, Natalia; Wieckiewicz, Mieszko

    2018-05-10

    Polymers are widely applied in medicine, including dentistry, i.e. in prosthodontics. The following paper is aimed at demonstrating the applications of selected modern polymers in prosthetic dentistry based on the reported literature. The study was conducted using the PubMed, SCOPUS and CINAHL databases in relation to documents published during 1999-2017. The following keywords were used: polymers with: prosthetic dentistry, impression materials, denture base materials, bite registration materials, denture soft liners, occlusal splint materials and 3D printing. Original papers and reviews which were significant from the modern clinical viewpoint and practical validity in relation to the possibility of using polymeric materials in prosthetic dentistry, were presented. Denture base materials were most commonly modified polymers. Modifications mainly concerned antimicrobial properties and reinforcement of the material structure by introducing additional fibers. Antimicrobial modifications were also common in case of relining materials. Polymeric materials have widely been used in prosthetic dentistry. Modifications of their composition allow achieving new, beneficial properties that affect quality of patients' life. Progress in science allows for a more methodologically-advanced research on the synthesis of new polymeric materials and incorporation of new substances into already known polymeric materials, that will require systematization and appropriate classification. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  20. MEDICOL: online learning in medicine and dentistry.

    Science.gov (United States)

    Broudo, Marc; Walsh, Charlene

    2002-09-01

    MEDICOL (Medicine and Dentistry Integrated Curriculum Online) provides a variety of Web-based resources that act as important adjuncts to all the teaching components of the medical and dental undergraduate curriculum. It uses WebCT, a course-management system, to provide the following educational functions: (1) track students' progress and present course information such as time-tables, learning objectives, handout materials, images, references, course assignments, and evaluations; (2) promote student-to-student and student-to-instructor interactions (through e-mail and bulletin boards); and (3) deliver self-directed learning components, including weekly self-assessment quizzes that provide immediate feedback and multimedia learning modules (clinical skills, radiology, evidence-based medicine, etc.). The University of British Columbia Faculties of Medicine and Dentistry feature a problem-based learning (PBL) curriculum in which students access many of the same tools they will utilize in their professional practice. In the PBL curriculum, students must access the relevant clinical data and educational resources. A MEDICOL site has also been developed for medical students to use during their rural family practice, a four- to six-week experience in the summer after their second year. This site has been designed to be a supplemental learning environment for not only these students, but also for their physician preceptors. It is intended to foster communication among participants, bring new resources to the rural setting, and allow preceptors to develop their Internet skills with the help of students who are already familiar with the electronic environment. The MEDICOL sites enable the exchange of information about the learning issues between, as well as within, tutorial groups. MEDICOL also provides students with faculty-reviewed resources that are listed online; multimedia presentations; and access to histology, radiology, and pathology images through an online image

  1. Environment, safety and health, management and organization compliance assessment, West Valley Demonstration Program, West Valley, New York

    International Nuclear Information System (INIS)

    1989-08-01

    An Environment, Safety and Health ''Tiger Team'' Assessment was conducted at the West Valley Demonstration Project. The Tiger Team was chartered to conduct an onsite, independent assessment of WVDP's environment, safety and health (ES ampersand H) programs to assure compliance with applicable Federal and State laws, regulations, and standards, and Department of Energy Orders. The objective is to provide to the Secretary of Energy the following information: current ES ampersand H compliance status of each facility; specific noncompliance items; ''root causes'' for noncompliance items; evaluation of the adequacy of ES ampersand H organization and resources (DOE and contractor) and needed modifications; and where warranted, recommendations for addressing identified problem areas

  2. The prediction in computer color matching of dentistry based on GA+BP neural network.

    Science.gov (United States)

    Li, Haisheng; Lai, Long; Chen, Li; Lu, Cheng; Cai, Qiang

    2015-01-01

    Although the use of computer color matching can reduce the influence of subjective factors by technicians, matching the color of a natural tooth with a ceramic restoration is still one of the most challenging topics in esthetic prosthodontics. Back propagation neural network (BPNN) has already been introduced into the computer color matching in dentistry, but it has disadvantages such as unstable and low accuracy. In our study, we adopt genetic algorithm (GA) to optimize the initial weights and threshold values in BPNN for improving the matching precision. To our knowledge, we firstly combine the BPNN with GA in computer color matching in dentistry. Extensive experiments demonstrate that the proposed method improves the precision and prediction robustness of the color matching in restorative dentistry.

  3. SEAMIST trademark in-situ instrumentation and vapor sampling system applications in the Sandia Mixed Waste Landfill Integrated Demonstration Program

    International Nuclear Information System (INIS)

    Lowry, W.E.; Dunn, S.D.; Cremer, S.C.; Williams, C.

    1994-01-01

    The SEAMIST trademark inverting membrane deployment system has been used successfully at the Mixed Waste Landfill Integrated Demonstration (MWLID) for multipoint vapor sampling/pressure measurement/permeability measurement/sensor integration demonstrations and borehole lining. Several instruments were deployed inside the SEAMIST trademark lined boreholes to detect metals, radionuclides, moisture, and geologic variations. The liner protected the instruments from contamination, maintained support of the uncased borehole wall, and sealed the total borehole from air circulation. The current activities have included the installation of three multipoint vapor sampling systems and sensor integration systems in 100-foot-deep vertical boreholes. A long term pressure monitoring program has recorded barometric pressure effects at depth with relatively high spatial resolution. The SEAMIST trademark system has been integrated with a variety of hydrologic and chemical sensors for in-situ measurements, demonstrating its versatility as an instrument deployment system which allows easy emplacement and removal. Standard SEAMIST trademark vapor sampling systems were also integrated with state-of-the-art VOC analysis technologies (automated GC, UV laser fluorometer). The results and status of these demonstration tests are presented

  4. A school-based human papillomavirus vaccination program in barretos, Brazil: final results of a demonstrative study.

    Directory of Open Access Journals (Sweden)

    José Humberto Tavares Guerreiro Fregnani

    Full Text Available The implementation of a public HPV vaccination program in several developing countries, especially in Latin America, is a great challenge for health care specialists.To evaluate the uptake and the three-dose completion rates of a school-based HPV vaccination program in Barretos (Brazil.THE STUDY INCLUDED GIRLS WHO WERE ENROLLED IN PUBLIC AND PRIVATE SCHOOLS AND WHO REGULARLY ATTENDED THE SIXTH AND SEVENTH GRADES OF ELEMENTARY SCHOOL (MEAN AGE: 11.9 years. A meeting with the parents or guardians occurred approximately one week before the vaccination in order to explain the project and clarify the doubts. The quadrivalent vaccine was administered using the same schedule as in the product package (0-2-6 months. The school visits for regular vaccination occurred on previously scheduled dates. The vaccine was also made available at Barretos Cancer Hospital for the girls who could not be vaccinated on the day when the team visited the school.Among the potential candidates for vaccination (n = 1,574, the parents or guardians of 1,513 girls (96.1% responded to the invitation to participate in the study. A total of 1,389 parents or guardians agreed to participate in the program (acceptance rate = 91.8%. The main reason for refusing to participate in the vaccination program was fear of adverse events. The vaccine uptake rates for the first, second, and third doses were 87.5%, 86.3% and 85.0%, respectively. The three-dose completion rate was 97.2%.This demonstrative study achieved high rates of vaccination uptake and completion of three vaccine doses in children 10-16 years old from Brazil. The feasibility and success of an HPV vaccination program for adolescents in a developing country may depend on the integration between the public health and schooling systems.

  5. Dentistry and Dental Hygiene Handbook. 1988 Edition.

    Science.gov (United States)

    New York State Education Dept., Albany. Office of the Professions.

    The laws, rules and regulations of the New York State Education Department governing dentistry and dental hygiene practice in the state are presented. In addition, the requirements and procedures for obtaining licensure and first registration as a dentist and dental hygienist in New York are discussed. The following chapters are provided: (1)…

  6. Dental implants: A boon to dentistry

    Directory of Open Access Journals (Sweden)

    B H Sripathi Rao

    2015-01-01

    Full Text Available The development and use of implants is one of the biggest advances in dentistry in the last few decades. It has helped to give many solutions to tooth loss as well as maxillo facial prosthetics. This article traces the history and evolution of dental implants.

  7. AIDS in dentistry | Muya | Tanzania Dental Journal

    African Journals Online (AJOL)

    Tanzania Dental Journal. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 4, No 1 (1989) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. AIDS in dentistry. RJ Muya. Abstract. No Abstract. Full Text:.

  8. Perceived competency towards preventive dentistry among dental ...

    African Journals Online (AJOL)

    Background: A previous study has shown that dental practitioners in Benghazi believed that the less prevention-oriented education system is one of the barriers to applying preventive dentistry. Objective: To assess attitudes and perceived competence of the dental graduates in Benghazi towards prevention and early ...

  9. Implant - Identification Tool for Forensic Dentistry

    Czech Academy of Sciences Publication Activity Database

    Dostálová, T.; Eliášová, H.; Seydlová, M.; Zvárová, Jana

    2008-01-01

    Roč. 19, č. 9 (2008), s. 926-926 ISSN 0905-7161. [EAO Annual Scientific Meeting /17./. 18.09.2008-20.09.2008, Warsaw] R&D Projects: GA MŠk(CZ) 1M06014 Institutional research plan: CEZ:AV0Z10300504 Keywords : forensic dentistry * identification * electronic health record Subject RIV: IN - Informatics, Computer Science

  10. Electronic Health Record for Forensic Dentistry

    Czech Academy of Sciences Publication Activity Database

    Zvárová, Jana; Dostálová, T.; Hanzlíček, Petr; Teuberová, Z.; Nagy, Miroslav; Pieš, Martin; Seydlová, M.; Eliášová, H.; Šimková, H.

    2008-01-01

    Roč. 47, č. 1 (2008), s. 8-13 ISSN 0026-1270 R&D Projects: GA MŠk(CZ) 1M06014 Institutional research plan: CEZ:AV0Z10300504 Keywords : electronic health record * structured data entry * forensic dentistry Subject RIV: IN - Informatics, Computer Science Impact factor: 1.057, year: 2008

  11. Top-Cited Articles in Implant Dentistry.

    Science.gov (United States)

    Fardi, Anastasia; Kodonas, Konstantinos; Lillis, Theodoros; Veis, Alexander

    Citation analysis is the field of bibliometrics that uses citation data to evaluate the scientific recognition and the influential performance of a research article in the scientific community. The aim of this study was to conduct a bibliometric analysis of the top-cited articles pertaining to implant dentistry, to analyze the main characteristics, and to display the most interesting topics and evolutionary trends. The 100 top-cited articles published in "Dentistry, Oral Surgery, and Medicine" journals were identified using the Science Citation Index Database. The articles were further reviewed, and basic information was collected, including the number of citations, journals, authors, publication year, study design, level of evidence, and field of study. The highly cited articles in implant dentistry were cited between 199 and 2,229 times. The majority of them were published in four major journals: Clinical Oral Implants Research, International Journal of Oral & Maxillofacial Implants, Journal of Clinical Periodontology, and Journal of Periodontology. The publication year ranged from 1981 to 2009, with 45% published in a nine-year period (2001 to 2009). Publications from the United States (29%) were the most heavily cited, followed by those from Sweden (23%) and Switzerland (17%). The University of Göteborg from Sweden produced the highest number of publications (n = 19), followed by the University of Bern in Switzerland (n = 13). There was a predominance of clinical papers (n = 42), followed by reviews (n = 25), basic science research (n = 21), and proceedings papers (n = 12). Peri-implant tissue healing and health (24%), implant success/failures (19.2%), and biomechanical topics (16.8%) were the most common fields of study. Citation analysis in the field of implant dentistry reveals interesting information about the topics and trends negotiated by researchers and elucidates which characteristics are required for a paper to attain a "classic" status. Clinical

  12. Exposure of Seventh and Eighth Grade Urban Youth to Dentistry and Oral Health Careers.

    Science.gov (United States)

    Mayberry, Melanie E; Young, Deirdre D; Sawilowsky, Shlomo; Hoelscher, Diane

    2018-01-01

    While pipeline programs for students from underrepresented minority groups have been established at the high school and college levels, fewer programs have been developed for middle school students. In an effort to reach this cohort, the University of Detroit Mercy School of Dentistry embarked on a grassroots collaborative pipeline program with two distinct segments: Urban Impressions and Dental Imprint. Their purpose is to expose Detroit-area seventh and eighth grade students to careers in dentistry, provide oral health education, and introduce role models. The aim of this pilot study was to determine outcomes for the middle school participants in Urban Impressions (n=86) and Dental Imprint (n=68). Both segments featured hands-on dental activities at the dental school. Outcomes were assessed by pretest-posttest surveys. Across the three cohorts, a total of 86 students participated in one or more sessions, with 57 completing the pre- and post-program surveys, for a 66% response rate. The results showed that the Dental Imprint respondents' knowledge of oral health, dental admissions, and specialties increased by an average 26% over three years. The gain in knowledge for each cohort was statistically significant (pdentistry as a career following the program. These results suggest that the two segments of this program are meeting their goals of increasing middle grade students' awareness of oral health professions including dentistry and providing access to role models. Institutions may benefit from the description of strategies used by this program to address challenges related to establishing early pipeline programs.

  13. A home-based individualized information communication technology training program for older adults: a demonstration of effectiveness and value.

    Science.gov (United States)

    Arthanat, Sajay; Vroman, Kerryellen G; Lysack, Catherine

    2016-01-01

    To demonstrate the effectiveness and value of a home-based information communication technology (ICT) training program for older adults. Thirteen older adults were provided in-home ICT training by graduate occupational therapy students using an iPad. The breadth and frequency of ICT use, perspectives on technology, and perceived independence were recorded at baseline, during the 3-month training and at follow-up, along with an end-of-study questionnaire. Non-parametric Friedman analysis was conducted to verify trends in the outcome measures. The qualitative data were examined by content analysis. Participants' breadth of ICT activities showed a significant trend across 6 months. Leisure accounted for the significant increase, while health management and social connections activities increased modestly. A positive trend in participants' perspectives on technology was evident along with a marginal increase in perceived independence. Participants' perspectives were thematically categorized as technology experiences, interactions with coach, training approach, and specific activities. As reflection of the training program's value, 12 of the 13 participants took ownership of the iPad at the end of the study. Building capacity of older adults to utilize the multifaceted potential of ICT is critical in addressing declines in health, impending disabilities, and social isolation. Implications for Rehabilitation A one-on-one home-based individualized information communication technology (ICT) training program for older adults could result in a progressive increase in the breadth of online activities carried out by them. Specifically, the increase in their usage of ICT could be expected in leisure-based online activities. Individualized training programs designed based on needs, priorities, and learning style of older adults could have a positive impact on their technological perspectives and intrinsic motivation to adopt ICT.

  14. Waste management system functional requirements for Interim Waste Management Facilities (IWMFs) and technology demonstrations, LLWDDD [Low-Level Disposal Development and Demonstration] Program

    International Nuclear Information System (INIS)

    1988-03-01

    The purpose of this report is to build upon the preceding decisions and body of information to prepare draft system functional requirements for each classification of waste disposal currently proposed for Low-Level Waste Disposal Development Demonstration (LLWDDD) projects. Functional requirements identify specific information and data needs necessary to satisfy engineering design criteria/objectives for Interim Waste Management Facilities. This draft will suppor the alternatives evaluation process and will continue to evolve as strategy is implemented, regulatory limits are established, technical and economic uncertainties are resolved, and waste management plans are being implemented. This document will become the planning basis for the new generation of solid LLW management facilities on new sites on the Reservation. Eighteen (18) general system requirements are identified which are applicable to all four Low-Level Waste (LLW) disposal classifications. Each classification of LLW disposal is individually addressed with respect ot waste characteristics, site considerations, facility operations, facility closure/post-closure, intruder barriers, institutional control, and performance monitoring requirements. Three initial LLW disposal sites have been proposed as locations on the ORR for the first demonstrations

  15. Pilot demonstrations of arsenic treatment technologies in U.S. Department of Energy Arsenic Water Technology Partnership program.

    Energy Technology Data Exchange (ETDEWEB)

    Everett, Randy L.; Aragon, Alicia R.; Siegal Malcolm D.; Dwyer, Brian P.

    2005-01-01

    The Arsenic Water Technology Partnership program is a multi-year program funded by a congressional appropriation through the Department of Energy. The program is designed to move technologies from benchscale tests to field demonstrations. It will enable water utilities, particularly those serving small, rural communities and Indian tribes, to implement the most cost-effective solutions to their arsenic treatment needs. As part of the Arsenic Water Technology Partnership program, Sandia National Laboratories is carrying out field demonstration testing of innovative technologies that have the potential to substantially reduce the costs associated with arsenic removal from drinking water. The scope for this work includes: (1) Selection of sites and identification of technologies for pilot demonstrations; (2) Laboratory studies to develop rapid small-scale test methods; and (3) Pilot-scale studies at community sites involving side-by-side tests of innovative technologies. The goal of site selection is to identify sites that allow examination of treatment processes and systems under conditions that are relevant to different geochemical settings throughout the country. A number of candidate sites have been identified through reviews of groundwater quality databases, conference proceedings and discussions with state and local officials. These include sites in New Mexico, Arizona, Colorado, Oklahoma, Michigan, and California. Candidate technologies for the pilot tests are being reviewed through vendor forums, proof-of-principle benchscale studies managed by the American Water Works Association Research Foundation (AwwaRF) and the WERC design contest. The review considers as many potential technologies as possible and screens out unsuitable ones by considering data from past performance testing, expected costs, complexity of operation and maturity of the technology. The pilot test configurations will depend on the site-specific conditions such as access, power availability

  16. Student perceptions about the mission of dental schools to advance global dentistry and philanthropy.

    Science.gov (United States)

    Ivanoff, Chris S; Ivanoff, Athena E; Yaneva, Krassimira; Hottel, Timothy L; Proctor, Hannah L

    2013-10-01

    In this study, 491 dental students at one dental school in the United States and one in Bulgaria were surveyed to assess their perceptions about the mission of dental schools to advance global dentistry and philanthropy. The study included questions about prior involvement in charitable dental missions. Many respondents felt that their dental school does not advance global dentistry nor adequately teaches students the virtues of philanthropy and volunteerism. The majority agreed, however, that dental schools have a moral obligation to raise the level of oral health care worldwide and help underserved communities access basic dental care. They reported that an opportunity to spend a semester at a foreign dental school would enhance their dental education in ways that are not presently fulfilled; help them better understand cultural diversity; and teach them about philanthropy and volunteerism. In their opinion, international exchange programs that provide clinical rotations and field experiences in economically challenged and underserved areas of the world would a) foster the global advancement of dentistry; b) promote an appreciation for cultural diversity and socioeconomic disparity in the communities that graduates will be serving; and c) teach students the virtues of philanthropy and volunteerism. This study may contribute to understanding factors affecting student involvement in programs to advance global dentistry.

  17. Training needs for general dentistry residents to place and restore two-implant-retained mandibular overdentures.

    Science.gov (United States)

    Malmstrom, Hans; Xiao, Jin; Romanos, Georgios E; Ren, Yan-Fang

    2015-01-01

    Implant therapy is rapidly becoming a standard of care for replacing missing dentition. Predoctoral dental curricula include some training in the implant restorative phase but offer limited exposure to the surgical phase, so it is important for postdoctoral general dentistry residency programs to provide competency training in all phases of implant therapy. The aim of this study was to determine the training needed for general dentistry residents to achieve competence in this area, specifically by defining the number of clinical experiences necessary in both the surgical and prosthetic phases of implant-retained mandibular overdenture construction (IRMOD). Fifteen Advanced Education in General Dentistry (AEGD) residents at one academic dental institution placed two implants in a total of 50 patients with edentulous mandibles and subsequently restored them with IRMOD. The supervising faculty member and the residents evaluated the competency level on a five-point scale after each implant placement and prosthetic case completion. According to the faculty evaluations, the residents achieved surgical competence after placing two implants in four to six cases and prosthetic management competence after restoring two to four cases of IRMOD. All 50 patients were satisfied with the treatment outcomes of IRMOD. This study concluded that general dentistry residents could potentially achieve competence in both the surgical and prosthetic phases of implant therapy while enrolled in an AEGD program.

  18. Extended burnup demonstration: reactor fuel program. Pre-irradiation characterization and summary of pre-program poolside examinations. Big Rock Point extended burnup fuel

    International Nuclear Information System (INIS)

    Exarhos, C.A.; Van Swam, L.F.; Wahlquist, F.P.

    1981-12-01

    This report is a resource document characterizing the 64 fuel rods being irradiated at the Big Rock Point reactor as part of the Extended Burnup Demonstration being sponsored jointly by the US Department of Energy, Consumers Power Company, Exxon Nuclear Company, and General Public Utilities. The program entails extending the exposure of standard BWR fuel to a discharge average of 38,000 MWD/MTU to demonstrate the feasibility of operating fuel of standard design to levels significantly above current limits. The fabrication characteristics of the Big Rock Point EBD fuel are presented along with measurement of rod length, rod diameter, pellet stack height, and fuel rod withdrawal force taken at poolside at burnups up to 26,200 MWD/MTU. A review of the fuel examination data indicates no performance characteristics which might restrict the continued irradiation of the fuel

  19. FY 1994 program summary: Office of Technology Development, Office of Research and Development, Office of Demonstration, Testing, and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-01

    The US Department of Energy (DOE) Office of Environmental Management, formerly the Office of Environmental Restoration and Waste Management (EM), was established in November 1989 as the first step toward correcting contamination problems resulting from nearly 50 years of nuclear weapons production and fuel processing activities. EM consolidates several DOE organizations previously responsible for the handling, treatment, and disposition of radioactive and hazardous waste. Within EM, the Office of Technology Development (OTD/EM-50) is responsible for developing technologies to meet DOE`s goal for environmental restoration. OTD manages an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT and E) for environmental cleanup, waste management, and related technologies. The program is designed to resolve major technical issues, to rapidly advanced beyond current technologies for environmental restoration and waste management operations, and to expedite compliance with applicable environmental laws and regulations. This report summarizes Fiscal Year 1994 (FY94) programmatic information, accomplishments, and planned activities relevant to the individual activities within OTD`s RDDT and E.

  20. FY 1994 program summary: Office of Technology Development, Office of Research and Development, Office of Demonstration, Testing, and Evaluation

    International Nuclear Information System (INIS)

    1994-10-01

    The US Department of Energy (DOE) Office of Environmental Management, formerly the Office of Environmental Restoration and Waste Management (EM), was established in November 1989 as the first step toward correcting contamination problems resulting from nearly 50 years of nuclear weapons production and fuel processing activities. EM consolidates several DOE organizations previously responsible for the handling, treatment, and disposition of radioactive and hazardous waste. Within EM, the Office of Technology Development (OTD/EM-50) is responsible for developing technologies to meet DOE's goal for environmental restoration. OTD manages an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT and E) for environmental cleanup, waste management, and related technologies. The program is designed to resolve major technical issues, to rapidly advanced beyond current technologies for environmental restoration and waste management operations, and to expedite compliance with applicable environmental laws and regulations. This report summarizes Fiscal Year 1994 (FY94) programmatic information, accomplishments, and planned activities relevant to the individual activities within OTD's RDDT and E

  1. Early Site Permit Demonstration Program: Siting Guide, Site selection and evaluation criteria for an early site permit application

    International Nuclear Information System (INIS)

    1993-01-01

    In August 1991, the Joint Contractors came to agreement with Sandia National Laboratories (SNL) and the Department of Energy (DOE) on a workscope for the cost-shared Early Site Permit Demonstration Program. One task within the scope was the development of a guide for site selection criteria and procedures. A generic Siting Guide his been prepared that is a roadmap and tool for applicants to use developing detailed siting plans for their specific region of the country. The guide presents three fundamental principles that, if used, ensure a high degree of success for an ESP applicant. First, the site selection process should take into consideration environmentally diverse site locations within a given region of interest. Second, the process should contain appropriate opportunities for input from the public. Third, the process should be applied so that it is clearly reasonable to an impartial observer, based on appropriately selected criteria, including criteria which demonstrate that the site can host an advanced light water reactor (ALWR). The Siting Guide provides for a systematic, comprehensive site selection process in which three basic types of criteria (exclusionary, avoidance, and suitability) are presented via a four-step procedure. It provides a check list of the criteria for each one of these steps. Criteria are applied qualitatively, as well as presented numerically, within the guide. The applicant should use the generic guide as an exhaustive checklist, customizing the guide to his individual situation

  2. Early Site Permit Demonstration Program: Siting Guide, Site selection and evaluation criteria for an early site permit application. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-24

    In August 1991, the Joint Contractors came to agreement with Sandia National Laboratories (SNL) and the Department of Energy (DOE) on a workscope for the cost-shared Early Site Permit Demonstration Program. One task within the scope was the development of a guide for site selection criteria and procedures. A generic Siting Guide his been prepared that is a roadmap and tool for applicants to use developing detailed siting plans for their specific region of the country. The guide presents three fundamental principles that, if used, ensure a high degree of success for an ESP applicant. First, the site selection process should take into consideration environmentally diverse site locations within a given region of interest. Second, the process should contain appropriate opportunities for input from the public. Third, the process should be applied so that it is clearly reasonable to an impartial observer, based on appropriately selected criteria, including criteria which demonstrate that the site can host an advanced light water reactor (ALWR). The Siting Guide provides for a systematic, comprehensive site selection process in which three basic types of criteria (exclusionary, avoidance, and suitability) are presented via a four-step procedure. It provides a check list of the criteria for each one of these steps. Criteria are applied qualitatively, as well as presented numerically, within the guide. The applicant should use the generic guide as an exhaustive checklist, customizing the guide to his individual situation.

  3. Dental anxiety: a comparison of students of dentistry, biology, and psychology

    Directory of Open Access Journals (Sweden)

    Storjord HP

    2014-09-01

    Full Text Available Helene Persen Storjord,1 Mari Mjønes Teodorsen,1 Jan Bergdahl,1 Rolf Wynn,2,3 Jan-Are Kolset Johnsen1 1Department of Clinical Dentistry, 2Department of Clinical Medicine, UiT - The Arctic University of Norway, 3Division of Addictions and Specialized Psychiatric Services, University Hospital of North Norway, Tromsø, Norway Introduction: Dental anxiety is an important challenge for many patients and clinicians. It is thus of importance to know more about dental students' own experiences with dental anxiety and their understanding of dental anxiety. The aim was to investigate differences in dental anxiety levels between dental students, psychology students, and biology students at a Norwegian university. Materials and methods: A total of 510 students of dentistry, psychology, and biology at the University of Tromsø received a questionnaire consisting of the Modified Dental Anxiety Scale, demographic questions, and questions relating to their last visit to the dentist/dental hygienist; 169 students gave complete responses. Nonparametric tests were used to investigate differences between the student groups. Results: The respondents were 78% female and 22% male; their mean age was 24 years. The dental students showed a significantly lower degree of dental anxiety than the psychology (P<0.001 and biology students (P<0.001. A significant decrease in dental anxiety levels was found between novice and experienced dentistry students (P<0.001. Discussion: The dental students had less dental anxiety compared to psychology students and biology students. Experienced dental students also had less dental anxiety than novice dental students. This could indicate that the dentistry program structure at the university may influence dental anxiety levels. Conclusion: Dental anxiety seemed to be less frequent in dentistry students compared to students of biology or clinical psychology. The practice-oriented dentistry education at the university might contribute to

  4. Rapid prototyping: An innovative technique in dentistry

    Directory of Open Access Journals (Sweden)

    Shakeba Quadri

    2017-01-01

    Full Text Available Emergence of advanced digital technology has opened up new perspectives for design and production in the field of dentistry. Rapid prototyping (RP is a technique to quickly and automatically construct a three-dimensional (3D model of a part or product using 3D printers or stereolithography machines. RP has various dental applications, such as fabrication of implant surgical guides, zirconia prosthesis and molds for metal castings, maxillofacial prosthesis and frameworks for fixed and removable partial dentures, wax patterns for the dental prosthesis and complete denture. Rapid prototyping presents fascinating opportunities, but the process is difficult as it demands a high level of artistic skill, which means that the dental technicians should be able to work with the models obtained after impression to form a mirror image and achieve good esthetics. This review aims to focus on various RP methods and its application in dentistry.

  5. [Dr. Atanasije Puljo: pioneer of Serbian dentistry].

    Science.gov (United States)

    Jovananović, Svetlana; Milovanović, Srdjan; Zagradjanin, Danica; Milovanović, Nebojša; Puzović, Dragana

    2012-01-01

    This paper describes the life and work of Dr. Atanasije Puljo (1878-1944). He was a volunteer in the Balkan wars, an active participant in the First World War; he was the first who noted the importance of team-work of a dentist and a surgeon in the care of jaw and facial injuries. He established primacy in this field, as he came up with this brilliant idea three years before other colleagues. His method of treatment of the upper jaw neglected fractures, called the Balkan method, was recognized worldwide. Dr. Puljo is the pioneer of dental radiology in Serbia, founder of the Odontology Clinic of the Medical Faculty and main supporter of the establishment of the School of Dentistry. Merits of Dr. Atanasije Puljo, medical practitioner with a broad knowledge in different fields, remain within the academic institution that was founded by this pioneer of dentistry in Serbia.

  6. Dentistry 4. X-ray diagnostics

    International Nuclear Information System (INIS)

    2014-01-01

    DIN pocketbook 267/4 gives an overview of the normative requirements of the new X-Ray and Radiation Protection Ordinance, which has been in effect since 1 November 2011. This DIN pocketbook is intended for anyone charged with professional responsibility for the use of ionizing radiation in dentistry, operators and users of x-ray devices, radiation protection officers, accredited experts, manufacturers as well as for anyone with an interest in radiation protection or optimal radiological diagnostics. It contains standards relating to the following areas: acceptance and constancy testing; devices for evaluating findings (monitors, film viewing devices), films, printers; archiving, designating, labelling. Adherence to the standards makes it possible to avoid distractive artefacts in x-ray images and optimise the quality of x-ray diagnostics in dentistry.

  7. Radiation protection awareness in dentistry students

    International Nuclear Information System (INIS)

    Mehdizadeh, S.; Vaziefehdoust, S.

    2007-01-01

    Complete text of publication follows. Dentistry students were assessed in one of the school of dentistry in Iran. 11% of responders had attended a radiation protection course. This study showed that those who have attended this course had improved knowledge of ALARA principle, assessment of the impact of digital imaging in patient dose reduction and usage of personal dosimeter systems. Course attendance made no considerable difference to knowledge of the patient dose, dose reduction techniques and annual permissible dose limits of general public and radiation workers. The results of this study revealed that the majority of students have not received adequate radiation protection teaching and even if a course has been attended, overall knowledge is still poor and formal teaching at undergraduate level should be corrected in the future.

  8. Going green with eco-friendly dentistry.

    Science.gov (United States)

    Avinash, Bhagyalakshmi; Avinash, B S; Shivalinga, B M; Jyothikiran, S; Padmini, M N

    2013-07-01

    Eco-friendly dentistry is currently transforming the medical and dental field to decrease its affect on our natural environment and reduce the amount of waste being produced. Eco-friendly dentistry uses a sustainable approach to encourage dentists to implement new strategies to try and reduce the energy being consumed and the large amount of waste being produced by the industry. Many reasonable, practical and easy alternatives do exist which would reduce the environmental footprint of a dental office were it to follow the 'green' recommendations. Dentist should take a leading role in the society by implementing 'green' initiatives to lessen their impact on the environment. This article provides a series of 'green' recommendations that dentists around the world can implement to become a leading Stewards of the environment.

  9. Nanotechnology in dentistry: prevention, diagnosis, and therapy.

    Science.gov (United States)

    Abou Neel, Ensanya Ali; Bozec, Laurent; Perez, Roman A; Kim, Hae-Won; Knowles, Jonathan C

    2015-01-01

    Nanotechnology has rapidly expanded into all areas of science; it offers significant alternative ways to solve scientific and medical questions and problems. In dentistry, nanotechnology has been exploited in the development of restorative materials with some significant success. This review discusses nanointerfaces that could compromise the longevity of dental restorations, and how nanotechnolgy has been employed to modify them for providing long-term successful restorations. It also focuses on some challenging areas in dentistry, eg, oral biofilm and cancers, and how nanotechnology overcomes these challenges. The recent advances in nanodentistry and innovations in oral health-related diagnostic, preventive, and therapeutic methods required to maintain and obtain perfect oral health, have been discussed. The recent advances in nanotechnology could hold promise in bringing a paradigm shift in dental field. Although there are numerous complex therapies being developed to treat many diseases, their clinical use requires careful consideration of the expense of synthesis and implementation.

  10. Application of Calcium Phosphate Materials in Dentistry

    Directory of Open Access Journals (Sweden)

    Jabr S. Al-Sanabani

    2013-01-01

    Full Text Available Calcium phosphate materials are similar to bone in composition and in having bioactive and osteoconductive properties. Calcium phosphate materials in different forms, as cements, composites, and coatings, are used in many medical and dental applications. This paper reviews the applications of these materials in dentistry. It presents a brief history, dental applications, and methods for improving their mechanical properties. Notable research is highlighted regarding (1 application of calcium phosphate into various fields in dentistry; (2 improving mechanical properties of calcium phosphate; (3 biomimetic process and functionally graded materials. This paper deals with most common types of the calcium phosphate materials such as hydroxyapatite and tricalcium phosphate which are currently used in dental and medical fields.

  11. Nanotechnology in dentistry: prevention, diagnosis, and therapy

    Science.gov (United States)

    Abou Neel, Ensanya Ali; Bozec, Laurent; Perez, Roman A; Kim, Hae-Won; Knowles, Jonathan C

    2015-01-01

    Nanotechnology has rapidly expanded into all areas of science; it offers significant alternative ways to solve scientific and medical questions and problems. In dentistry, nanotechnology has been exploited in the development of restorative materials with some significant success. This review discusses nanointerfaces that could compromise the longevity of dental restorations, and how nanotechnolgy has been employed to modify them for providing long-term successful restorations. It also focuses on some challenging areas in dentistry, eg, oral biofilm and cancers, and how nanotechnology overcomes these challenges. The recent advances in nanodentistry and innovations in oral health-related diagnostic, preventive, and therapeutic methods required to maintain and obtain perfect oral health, have been discussed. The recent advances in nanotechnology could hold promise in bringing a paradigm shift in dental field. Although there are numerous complex therapies being developed to treat many diseases, their clinical use requires careful consideration of the expense of synthesis and implementation. PMID:26504385

  12. Direct reimbursement. The future for organized dentistry.

    Science.gov (United States)

    Paul, D P

    2001-10-01

    Direct reimbursement, or DR, has been a popular topic in organized dentistry for much of the last decade, and the concept is beginning to be more widely known. This article explores the underpinnings of and future for DR. TYPES OF LITERATURE REVIEWED: This article is based on an online review of the dental, medical and business literature. The author explores the advantages of DR for patients, employers and dentists. He also presents purported disadvantages of DR, and refutes them. Organized dentistry's marketing efforts and the importance of third-party administrators also are examined. During the next several years, DR has the potential to become the vehicle of choice for financing much of the dental care provided in the United States. Dentists need to become more aware of what DR is and what it can offer the public. They then will be better able to promote DR, which is a significantly better payment system for dental care than any other available today.

  13. Program description for the program Demonstration program for electric vehicles 2011-2015; Programbeskrivning foer programmet Demonstrationsprogram foer elfordon 2011-2015

    Energy Technology Data Exchange (ETDEWEB)

    2011-04-15

    The program's efforts aim at, firstly, from a user perspective identify and possibly eliminate barriers for large-scale introduction of electric vehicles on the Swedish market. Through various research activities based in the real environment experience may be drawn from both vehicle use and different types of behavior. Infrastructure tests on a sufficient scale give the combined effect of real-life test environments for the combination of vehicles and charging environments as well as a base for experiences of softer issues around electric vehicles. Precisely these behavioral experiences are difficult to reach via the related but more technically focused programs such as, FFI (Vehicle strategic research and innovation) and Energy efficient road vehicles. Several systems for electrification of vehicles exist today, and further initiatives for solutions are on the way. It is therefore very important to examine which systems give the highest total energy efficiency. It is also relevant for these different systems in a real environment to explore the potentials and difficulties that may arise in larger implementations

  14. Antibiotics: Use and misuse in pediatric dentistry

    OpenAIRE

    F C Peedikayil

    2011-01-01

    Antibiotics are commonly used in dentistry for prophylactic as well as for therapeutic purposes. Most often antibiotics are used in unwarranted situations, which may give rise to resistant bacterial strains. Dentists want to make their patients well and to prevent unpleasant complications. These desires, coupled with the belief that many oral problems are infectious, stimulate the prescribing of antibiotics. Good knowledge about the indications of antibiotics is the need of the hour in prescr...

  15. Evidence-based dentistry: Future aspects

    Directory of Open Access Journals (Sweden)

    Kanika Mohindra

    2017-01-01

    Full Text Available Traditionally, clinical decisions in dentistry have been based on the experience of the dentist. If the given treatment works, it was utilized again, but if the results were disappointing, the procedure was deserted. Evaluating clinical treatment in this fashion is difficult because it is hard to know which factors are important for success and which contribute to failure. This came with the concept of evidence-based approach which facilitates conclusions for clinical practice based on sound research studies.

  16. [Sugar and the birth of dentistry].

    Science.gov (United States)

    Dijs, F

    2004-06-01

    It took mankind some ten thousand years to get sugarcane from the Pacific to the Mediterranean. Once it reached Europe and the Europeans knew how to handle it, it took them only a hundred years to turn the production of sugar into the biggest industry of the world. Exactly in those hundred years the birth of modern medicine--and dentistry--is placed. This coincidence is too particular to be left unnoticed.

  17. Position paper on digital communication in dentistry.

    Science.gov (United States)

    Chambers, David W

    2012-01-01

    Digital communication offers advantages and challenges to dental practice. As dentistry becomes comfortable with this technology, it is essential that commercial and other values not be accepted on a par with professional ones and that the traditional dentist-patient relationship not be compromised by inserting third parties that introduce nonprofessional standards. The Officers and Regents of the American College of Dentist have prepared this background and position paper as a guide to the ethical use of digital communication in dental practice.

  18. The economics of dentistry: a neglected concern.

    Science.gov (United States)

    Shariati, Batoul; MacEntee, Michael I; Yazdizadeh, Maryam

    2013-10-01

    Demand for economic evaluations in health care is growing with expectations that they will help to develop regional and national policies on health and social programmes. We present here the scope, quality and content of systematic reviews and meta-analyses relating to the economics of dentistry published over the last 15 years. To review the quality and outcome of systematic reviews and meta-analyses relating to the economics of dental treatments, preventions and services. A systematic search was conducted in 14 electronic databases for systematic reviews and meta-analyses published between January 1997 and July 2011 on the economics of oral disorders and oral health care. Review papers were extracted by two independent investigators to identify the characteristics, results and quality of the reviews and to highlight gaps in knowledge about the economics of dentistry. From 3150 unique references, we found 73 systematic reviews or meta-analyses of dental economics as primary or secondary outcomes. The focus of 12 of them was on the cost or cost-effectiveness of dental prevention, 54 on treatment, five on prevention and treatment and two on delivery of dental services. However, only 12 of the systematic reviews drew conclusions from economic data, and four of them constructed an economic model from synthesized data. Overall, the quality was good in the 12 systematic reviews but poor in the original studies. There is very little helpful data published on the economics of dentistry. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  19. Investigation of The Omaha System for dentistry.

    Science.gov (United States)

    Jurkovich, M W; Ophaug, M; Salberg, S; Monsen, K

    2014-01-01

    Today, dentists and hygienists have inadequate tools to identify contributing factors to dental disease, diagnosis of disease or to document outcomes in a standardized and machine readable format. Increasing demand to find the most effective care methodologies make the development of further terminologies for dentistry more urgent. Preventive care is the focus of early efforts to define best practices. We reviewed one possibility with a history of public health documentation that might assist in these early efforts at identifying best practices. This paper examines, through a survey of dentists, the Omaha System Problem Classification Scheme. The survey requested that dentists rate the usefulness of knowing about specific signs and symptoms for each of the 42 problems within the Problem list of the Omaha System. Using a weighted scoring system, 22 of the 42 problems received over 50% of the possible maximum score and 30 of the 42 problems received at least 25% of the possible points. These findings suggests that further evaluation of The Omaha System, may be useful to dentistry. At a minimum, the survey provides additional information about non-physiological problems, signs, and symptoms that may be appropriate for documentation purposes within an electronic health record (EHR) used in dentistry.

  20. Digital photoelastic analysis applied to implant dentistry

    Science.gov (United States)

    Ramesh, K.; Hariprasad, M. P.; Bhuvanewari, S.

    2016-12-01

    Development of improved designs of implant systems in dentistry have necessitated the study of stress fields in the implant regions of the mandible/maxilla for better understanding of the biomechanics involved. Photoelasticity has been used for various studies related to dental implants in view of whole field visualization of maximum shear stress in the form of isochromatic contours. The potential of digital photoelasticity has not been fully exploited in the field of implant dentistry. In this paper, the fringe field in the vicinity of the connected implants (All-On-Four® concept) is analyzed using recent advances in digital photoelasticity. Initially, a novel 3-D photoelastic model making procedure, to closely mimic all the anatomical features of the human mandible is proposed. By choosing appropriate orientation of the model with respect to the light path, the essential region of interest were sought to be analysed while keeping the model under live loading conditions. Need for a sophisticated software module to carefully identify the model domain has been brought out. For data extraction, five-step method is used and isochromatics are evaluated by twelve fringe photoelasticity. In addition to the isochromatic fringe field, whole field isoclinic data is also obtained for the first time in implant dentistry, which could throw important information in improving the structural stability of the implant systems. Analysis is carried out for the implant in the molar as well as the incisor region. In addition, the interaction effects of loaded molar implant on the incisor area are also studied.

  1. Recent advancements in regenerative dentistry: A review.

    Science.gov (United States)

    Amrollahi, Pouya; Shah, Brinda; Seifi, Amir; Tayebi, Lobat

    2016-12-01

    Although human mouth benefits from remarkable mechanical properties, it is very susceptible to traumatic damages, exposure to microbial attacks, and congenital maladies. Since the human dentition plays a crucial role in mastication, phonation and esthetics, finding promising and more efficient strategies to reestablish its functionality in the event of disruption has been important. Dating back to antiquity, conventional dentistry has been offering evacuation, restoration, and replacement of the diseased dental tissue. However, due to the limited ability and short lifespan of traditional restorative solutions, scientists have taken advantage of current advancements in medicine to create better solutions for the oral health field and have coined it "regenerative dentistry." This new field takes advantage of the recent innovations in stem cell research, cellular and molecular biology, tissue engineering, and materials science etc. In this review, the recently known resources and approaches used for regeneration of dental and oral tissues were evaluated using the databases of Scopus and Web of Science. Scientists have used a wide range of biomaterials and scaffolds (artificial and natural), genes (with viral and non-viral vectors), stem cells (isolated from deciduous teeth, dental pulp, periodontal ligament, adipose tissue, salivary glands, and dental follicle) and growth factors (used for stimulating cell differentiation) in order to apply tissue engineering approaches to dentistry. Although they have been successful in preclinical and clinical partial regeneration of dental tissues, whole-tooth engineering still seems to be far-fetched, unless certain shortcomings are addressed. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Rapid Prototyping and its Application in Dentistry

    Directory of Open Access Journals (Sweden)

    V. N. V. Madhav

    2013-01-01

    Full Text Available Medical implants and biological models have three main characteristics: low volume, complex shape, and can be customized. These characteristics suit very well with Rapid Prototyping (RP and Rapid Manufacturing (RM processes. RP/RM processes are fabricated part layer- by-layer until complete shape finished from 3D model. Biocompatible materials, such as Titanium and Titanium alloy, Zirconium, Cobalt Chromium, PEEK, etc, are used for fabrication process. Reverse Engineering (RE technology greatly affects RP/RM processes. RE is used to capture or scan image of the limb, cranium, tooth, and other biological objects. Three common methods to get the image are 3D laser scanning, Computer Tomography (CT, and Magnetic Resonance Imaging (MRI. Main RP/RM techniques used in Dentistry are Stereotype Lithography Apparatus (SLA, Fused Deposition Modeling (FDM, Selective Laser Sintering (SLS, and ink jet printing. This article reviews the changing scenario of technology in dentistry with special emphasis on Rapid Prototyping and its various applications in Dentistry.

  3. YouTube, dentistry, and dental education.

    Science.gov (United States)

    Knösel, Michael; Jung, Klaus; Bleckmann, Annalen

    2011-12-01

    The objective of this study was to systematically assess the informational value, intention, source, and bias of videos related to dentistry available on the video-sharing Internet platform YouTube. YouTube (www.youtube.com) was searched for videos related to dentistry, using the system-generated sorts "by relevance" and "most viewed" and two categories (All and Education). Each of the first thirty results was rated by two assessors filling out a questionnaire for each (total: 120). The data were subjected to statistical analysis using Cohen's kappa, Pearson's correlation coefficient tau, Mann-Whitney U-tests, and a nonparametric three-way ANOVA, including an analysis of the interaction between the sorting and category effect, with an α-level of 5 percent. The scan produced 279,000 results in the category All and 5,050 in the category Education. The analysis revealed a wide variety of information about dentistry available on YouTube. The purpose of these videos includes entertainment, advertising, and education. The videos classified under Education have a higher degree of usefulness and informational value for laypersons, dental students, and dental professionals than those found in a broader search category. YouTube and similar social media websites offer new educational possibilities that are currently both underdeveloped and underestimated in terms of their potential value. Dentists and dental educators should also recognize the importance of these websites in shaping public opinion about their profession.

  4. Ethics and marketing in esthetic dentistry

    Directory of Open Access Journals (Sweden)

    Obradović-Đuričić Kosovka

    2017-01-01

    Full Text Available Contemporary dentistry is, first of all, characterized by diverse accelerated development, owing to improvements of information and other technologies, as well as the development of dental materials (shape-memory biomaterials, nanomaterials, biomaterials for application in tissue engineering, etc.. Expert doctrinaire attitudes move from the direction of operative interventions, whereby disease and acute symptoms are primarily treated, towards the strengthening of oral health by minimally invasive procedures. A particular place in patients’ total rehabilitation belongs to numerous esthetic procedures which, to a large extent, make up a wants-based service, led by the patients’ needs and affinities. This paper deals with differences between cosmetic and esthetic dentistry. The complexity of esthetic dentistry, which favors therapy with the change of function parameters in care for the patient, is emphasized. On the other hand, more attention is paid to the need to know and respect ethical and marketing principles that follow any activity of dentists, starting from the first contact with the patient, the selection of certified materials, to the implementation of the appropriate treatment plan. Well-directed communication and comprehensive awareness of the patient, the use of the visual analog scale, consideration of realistic resources in therapy, and the acceptance of de Bono model of adopted parallel thinking are determinants which help dentists define a problem adequately, find quality solutions, open alternative solutions, and reduce the potential risks in patients’ therapy.

  5. Treatment plan for aqueous/organic/decontamination wastes under the Oak Ridge Reservation FFCA Development, Demonstration, Testing, and Evaluation Program

    International Nuclear Information System (INIS)

    Backus, P.M.; Benson, C.E.; Gilbert, V.P.

    1994-08-01

    The U.S. Department of Energy (DOE) Oak Ridge Operations Office and the U.S. Environmental Protection Agency (EPA)-Region IV have entered into a Federal Facility Compliance Agreement (FFCA) which seeks to facilitate the treatment of low-level mixed wastes currently stored at the Oak Ridge Reservation (ORR) in violation of the Resource, Conservation and Recovery Act Land Disposal Restrictions. The FFCA establishes schedules for DOE to identify treatment for wastes, referred to as Appendix B wastes, that current have no identified or existing capacity for treatment. A development, demonstration, testing, and evaluation (DDT ampersand E) program was established to provide the support necessary to identify treatment methods for mixed was meeting the Appendix B criteria. The Program has assembled project teams to address treatment development needs for major categories of the Appendix B wastes based on the waste characteristics and possible treatment technologies. The Aqueous, Organic, and Decontamination (A OE D) project team was established to identify pretreatment options for aqueous and organic wastes which will render the waste acceptable for treatment in existing waste treatment facilities and to identify the processes to decontaminate heterogeneous debris waste. In addition, the project must also address the treatment of secondary waste generated by other DDT ampersand E projects. This report details the activities to be performed under the A OE D Project in support of the identification, selection, and evaluation of treatment processes. The goals of this plan are (1) to determine the major aqueous and organic waste streams requiring treatment, (2) to determine the treatment steps necessary to make the aqueous and organic waste acceptable for treatment in existing treatment facilities on the ORR or off-site, and (3) to determine the processes necessary to decontaminate heterogeneous wastes that are considered debris

  6. [The rise and development of general dentistry in China].

    Science.gov (United States)

    Liu, Hongchen

    2016-02-01

    General dentistry is an important part of the dental medicine and general dentists and general dentistry form the basis of clinical dental medicine. China's general dentistry has a long history, which started as an independent specialist in the 1990s. At present, the Chinese general dental medicine has received more and more attention as an independent profession. General dental medical model has been rapidly developed in the general hospital department of dentistry, private practice and community dentistry institutions, dental specialist hospitals and so on. In this paper, we will review the rise and development of China's general dentistry, and report its theoretical characteristics, institutional framework, academic progress, member development report, and look forward to its development in the future.

  7. Soils, surficial geology, and geomorphology of the Bear Creek Valley Low-Level Waste Disposal Development and Demonstration Program site

    International Nuclear Information System (INIS)

    Lietzke, D.A.; Lee, S.Y.; Lambert, R.E.

    1988-04-01

    An intensive soil survey was conducted on the proposed Low-Level Waste Disposal Development and Demonstration Program site (LLWDDD) in Bear Creek Valley. Soils on the site were related to the underlying residuum and to the surficial colluvium and alluvium. Within any particular geologic formation, soils were subdivided based mostly on the degree of weathering, as reflected by saprolite weathering and morphologic features of the soils. Degree of weathering was related both to slope shape and gradient and to the joint-fracture system. Erosion classes were also used to make further subdivisions of any particular soil. Deep pits were dug in each of the major Conasauga Group formations (Pumpkin Valley, Rogersville, Maryville, and Nolichucky) for soil and saprolite characterization. Because of the widespread presence of alluvium and colluvium, which are potential sources of fill and final cover material, pits and trenches were dug to characterize the properties of these soils and to try to understand the past geomorphic history of the site. The results of the soil survey investigation indicated that the deeply weathered Pumpkin Valley residuum has good potential for the construction of tumuli or other types of belowground or aboveground burial of prepackaged compacted waste. 11 refs., 30 figs., 3 tabs

  8. Report for the ASC CSSE L2 Milestone (4873) - Demonstration of Local Failure Local Recovery Resilient Programming Model.

    Energy Technology Data Exchange (ETDEWEB)

    Heroux, Michael Allen; Teranishi, Keita

    2014-06-01

    Recovery from process loss during the execution of a distributed memory parallel application is presently achieved by restarting the program, typically from a checkpoint file. Future computer system trends indicate that the size of data to checkpoint, the lack of improvement in parallel file system performance and the increase in process failure rates will lead to situations where checkpoint restart becomes infeasible. In this report we describe and prototype the use of a new application level resilient computing model that manages persistent storage of local state for each process such that, if a process fails, recovery can be performed locally without requiring access to a global checkpoint file. LFLR provides application developers with an ability to recover locally and continue application execution when a process is lost. This report discusses what features are required from the hardware, OS and runtime layers, and what approaches application developers might use in the design of future codes, including a demonstration of LFLR-enabled MiniFE code from the Matenvo mini-application suite.

  9. Environmental considerations for inclusion in program opportunity notices, requests for proposals, and environmental reports: fossil energy demonstration plants

    Energy Technology Data Exchange (ETDEWEB)

    Salk, M.S.; Baird, J.N.; Barnthouse, L.W.; Berry, L.G.; Roop, R.D.; Sanders, F.S.

    1978-01-01

    This document was prepared for the Department of Energy, Division of Coal Conversion, for use in developing Program Opportunity Notices (PON), Requests for Proposals (RFP), and Environmental Reports (ER). Environmental considerations to be addressed by Offerors and Contractors are divided into three parts that correspond to the separate stages of project development: (1) the Offeror's response to the PON or RFP; (2) the Contractor's performance of baseline data collection and environmental impact assessment that results in an Environmental Report (ER) for use by DOE in the preparation of an Environmental Impact Statement (EIS); and (3) the Contractor's continuance of environmental monitoring and assessment during construction and operation. Environmental analysis and environmental protection are an integral part of the Offeror's or Contractor's performance under contract to DOE. Consideration should be given to the health and socioeconomic status of man as well as to the physical and biological environment. The Offeror's or Contractor's consideration of and commitment to avoiding adverse environmental impacts must be demonstrated at every stage of the process from planning through construction and operation.

  10. Dentistry proteomics: from laboratory development to clinical practice.

    Science.gov (United States)

    Rezende, Taia M B; Lima, Stella M F; Petriz, Bernardo A; Silva, Osmar N; Freire, Mirna S; Franco, Octávio L

    2013-12-01

    Despite all the dental information acquired over centuries and the importance of proteome research, the cross-link between these two areas only emerged around mid-nineties. Proteomic tools can help dentistry in the identification of risk factors, early diagnosis, prevention, and systematic control that will promote the evolution of treatment in all dentistry specialties. This review mainly focuses on the evolution of dentistry in different specialties based on proteomic research and how these tools can improve knowledge in dentistry. The subjects covered are an overview of proteomics in dentistry, specific information on different fields in dentistry (dental structure, restorative dentistry, endodontics, periodontics, oral pathology, oral surgery, and orthodontics) and future directions. There are many new proteomic technologies that have never been used in dentistry studies and some dentistry areas that have never been explored by proteomic tools. It is expected that a greater integration of these areas will help to understand what is still unknown in oral health and disease. Copyright © 2013 Wiley Periodicals, Inc.

  11. Urban partnership agreement and congestion reduction demonstration programs : lessons learned on congestion pricing from the Seattle and Atlanta household travel behavior surveys.

    Science.gov (United States)

    2014-04-01

    This paper presents lessons learned from household traveler surveys administered in Seattle and Atlanta as part of the evaluation of the Urban Partnership Agreement and Congestion Reduction Demonstration Programs. The surveys use a two-stage panel su...

  12. The economics of pit and fissure sealants in preventive dentistry: a review.

    Science.gov (United States)

    Kitchens, Dinah H

    2005-08-15

    Oral diseases are progressive, cumulative, and become more intricate to treat with advancement. While dental caries is an infectious transmissible disease with children being at the highest risk, primary prevention can reduce this risk. Primary prevention in dentistry is usually considered to be community fluoridated water supplies, professional fluoride treatments, and pit and fissure sealants. While community fluoridated water supplies have been proven to be cost-effective, the cost-effectiveness of pit and fissure sealants has primarily been studied in school-based programs of children from low socio-economic backgrounds. Dental sealant programs are just one way to help increase primary prevention in the oral health disparities of children. The purpose of this paper is to review the literature regarding the cost-effectiveness of pit and fissure sealants as a preventive strategy in preventive dentistry.

  13. Professionalism: challenges for dentistry in the future.

    Science.gov (United States)

    Ozar, D T

    2012-11-30

    While countries varies significantly in the financing of dental care, they are much more alike in the delivery of dentistry. Dental care is principally provided in dental offices and clinics that are independent business entities whose business leaders are most often the dentists themselves. However society expects from dentists a level of professionalism (i.e. habitually acting ethically, both in terms of competence and conduct) in contrast to the methods and motivations of the marketplace. This is why the single most important challenge of dental professional ethics continues to be giving proper priority to patients' well being and building ethically correct decision-making relationships with patients while, at the same time, trying to maintain a successful business operation. If we look into dentistry's future, the centrality of this aspect of professional ethics is not likely to change, although the ways in which dentists might violate this trust will probably multiple as funding mechanisms become increasingly complex. It is important that dentists reflect with fresh eyes on their ethical commitments. One challenge is the increased availability of oral health information to the public and the fact that so many people are uncritical of the accuracy of information in the media and on the web. A second is the increase in the amount of health care advertising in many societies. A third is the growth of aesthetic dentistry that differs from standard oral health care in important and ethically significant ways. The fourth is insurance that frequently complicates the explanation of a patient's treatment alternatives and often brings a third party into the treatment decision relationship. The ethical challenges of each of these factors will be considered and ultimately tying it to the central theme of dental professionalism.

  14. Women dentists: Changing the face of dentistry

    Directory of Open Access Journals (Sweden)

    Jammula Surya Prasanna

    2015-01-01

    Full Text Available It was only toward the close of the last century that women emancipated themselves from their former small territory of usefulness in a strictly domestic life, and pushing forward, proved themselves often the business equal to men and sometimes their superior. If was long before this progression, when a women in business or professional ranks was almost a curiosity. When women first entered the profession, they faced many obstacles. Mentors or faculty in the dental organizations majority were male restraining women by all means. In the beginning, men were resentful because they feel women are inferior. It took a long time for women to become a consistent presence in dental schools. In the beginning, dental schools used to admit one or two women each year, later the number increased slowly. Olden day′s women used to relieve not even the tooth ache but also used to relieve others fret also. But histories of dentistry were not acknowledged the talent of women whatsoever. The efforts and achievements of women punch the clock in the future dentistry. The current scenario has totally changed now. Nearly, half of all dental students′ are women and 25% of them are practicing dentists. Only 3% women dentists were there before the 1970s. [1] Women struggled to obtain a degree, to establish practices, and are respected as professionals. Some women choose this rewarding occupation as career followed by their family members. The population tally of chosen work upbringing has changed over time. This paper reports in a delineative way of the amelioration, staggering presence, and intendment of dentistry practicing by worldwide women.

  15. Advances in local anesthesia in dentistry.

    Science.gov (United States)

    Ogle, Orrett E; Mahjoubi, Ghazal

    2011-07-01

    Local pain management is the most critical aspect of patient care in dentistry. The improvements in agents and techniques for local anesthesia are probably the most significant advances that have occurred in dental science. This article provides an update on the most recently introduced local anesthetic agents along with new technologies used to deliver local anesthetics. Safety devices are also discussed, along with an innovative method for reducing the annoying numbness of the lip and tongue following local anesthesia. Copyright © 2011 Elsevier Inc. All rights reserved.

  16. The changing face of dentistry: nanotechnology

    Science.gov (United States)

    Kanaparthy, Rosaiah; Kanaparthy, Aruna

    2011-01-01

    The human body comprises molecules; hence, the availability of molecular nanotechnology will permit dramatic progress to address medical problems and will use molecular knowledge to maintain and improve human health at the molecular scale. Nanomedicine could develop devices that are able to work inside the human body in order to identify the early presence of a disease, and to identify and quantify toxic molecules and tumor cells, for example. Nanodentistry will make possible the maintenance of comprehensive oral health by employing nanomaterials, including tissue engineering and, ultimately, dental nanorobots. This review is an attempt to highlight the possible applications of nanotechnology and the use of nanomaterials in dentistry. PMID:22131826

  17. [The changing picture of practicing dentistry].

    Science.gov (United States)

    Hokwerda, O

    2006-03-01

    Originally, dentists were particularly technical and curative practitioners. Nowadays, patient care is brought into focus, directed at maintaining oral health permanently by prevention and necessary curative treatments as a contribution to general health and well-being. The changing picture of praccising does not develop as a matter-of-course since many factors have an effect on dental practice. Effecting factors are: content concerning developments, technological advancements, legislation, government policies, organizational aspects, and typical characteristics of dental practitioners. The changing picture of practising dentistry is connected with uncertainty, proves to be hard to control, and some adjustments occur around practising.

  18. Radiological equipment 'Planmeca' used in dentistry

    International Nuclear Information System (INIS)

    Tuciac, Carolina

    2011-01-01

    Equipment 'Planmeca Pro Max 3D' for volumetric imaging with cone beam examine the patients under computerized tomography considering the rate 0.2-1.0 mm, digital orthopantomography, 3D cephalometry. 3D tomography image facilitates an accurate view of oral structures. It was adopted quickly, and became the basic equipment for all applications in dentistry. The Cone Beam Volumetric Tomography (CBVT), Planmeca Pro Max 3D model give the opportunity to obtain great radiological information very important for the dentist decision. (author)

  19. Ergonomics in dentistry: experiences of the practice by dental students.

    Science.gov (United States)

    Garcia, P P N S; Gottardello, A C A; Wajngarten, D; Presoto, C D; Campos, J A D B

    2017-08-01

    The aim of this study was to qualitatively evaluate the experiences of students enrolled in the last year of dentistry school with ergonomic practice. This is a qualitative, observational and cross-sectional study, with a non-probabilistic sample design. The sample comprised students enrolled in the last year of dentistry in Araraquara-UNESP (n = 29). The data were collected by means of open semi-structured and individual interviews, captured by a digital voice recorder. The students were interviewed in their own university at a time that was previously scheduled, and care was taken to provide a private and welcoming environment to carry out the interviews. A script containing questions related to practices in ergonomics was prepared at the university. Data analysis was carried out using the qualitative-quantitative Collective Subject Discourse technique with the aid of Qualiquantisoft ® software program. It was found that more than half of the students (58.6%) believe that adopting an ergonomic posture is important to prevent future problems, pain and occupational diseases, and 62.1% of the students confirm having difficulties in adopting ergonomic postures due to the types of treatment required and the regions of the mouth being treated. The main reasons stated for the fact that their colleagues do not adopt ergonomic postures are lack of attention, practice and forgetfulness (44.8%) and difficulty in visualising the operatory field or the procedure performed (27.6%). It is possible to conclude that the students interviewed know ergonomic principles and their importance in occupational health. However, they found it difficult to put these principles into practice. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  20. Office of Technology Development's Research, Development, Demonstration, Testing and Evaluation Mid-Year Program Review. Volume 1

    International Nuclear Information System (INIS)

    1994-01-01

    This document presents brief summaries of waste management, remedial action, decommissioning/decontamination, and waste processing programs and issues currently being developed at Department of Energy Facilities

  1. Office of Technology Development`s Research, Development, Demonstration, Testing and Evaluation Mid-Year Program Review. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This document presents brief summaries of waste management, remedial action, decommissioning/decontamination, and waste processing programs and issues currently being developed at Department of Energy Facilities.

  2. Pediatric Dentistry: A Clinical Approach, 3rd Edition

    DEFF Research Database (Denmark)

    Pediatric Dentistry: A Clinical Approach, Third Edition provides a uniquely clear, comprehensive, and clinical approach to the dental treatment of children and adolescents. •Offers systematic coverage of all clinical, scientific and social topics relating to pediatric dentistry •Thoroughly revised...

  3. Entrepreneurial Knowledge and Aspirations of Dentistry Students in South Africa

    Science.gov (United States)

    Brijlal, Pradeep; Brijlal, Priscilla

    2013-01-01

    An investigation of the intentions and knowledge of entrepreneurship of final-year university dentistry students is reported, with particular regard to the factors of gender and race. A questionnaire survey was used with final-year dentistry students, over two years, at the University of the Western Cape in South Africa. The findings show that…

  4. book appraisal: history of dentistry in nigeria chronicles of medical ...

    African Journals Online (AJOL)

    Dentistry in Healthcare. From modest foundations, the specialty of dentistry has grown to become one of the most relevant service providers of healthcare in the community. A large proportion of every community seeks after dentists. The importance of proper care of the teeth cannot be over-emphasized. The mouth is the ...

  5. Forensic Dentistry - Identification from the Dentist's Point of View

    Czech Academy of Sciences Publication Activity Database

    Dostálová, T.; Eliášová, H.; Seydlová, M.; Pilin, A.; Hippmann, R.; Šimková, H.; Daniš, I.; Zvárová, Jana; Nagy, Miroslav

    2008-01-01

    Roč. 109, č. 1 (2008), s. 14-18 ISSN 1214-6994 R&D Projects: GA MŠk(CZ) 1M06014 Institutional research plan: CEZ:AV0Z10300504 Keywords : dentistry * forensic dentistry * identification Subject RIV: IN - Informatics, Computer Science

  6. Book appraisal: history of dentistry in Nigeria | Michael ... - Ibadan

    African Journals Online (AJOL)

    The book appraised in this edition of Chronicles of Medical History, History of Dentistry in Nigeria, is a product of many years of painstaking research. The Author, Professor Eyitope Ogunbodede, has put together an excellent book that is a great work of art. Dentistry is one of the first specialties in medicine with a very long ...

  7. Industrial Fuel Gas Demonstration Plant Program. Monthly, quarterly and annual progress report, December 1978 and Calender Year 1978

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-01-01

    A new pilot plant program developed by DOE and the team members, was started on September 20, 1978. Pilot plant success was achieved in obtaining an ash balanced condition for several days with ash agglomeration with a pure coal feed. This was the objective of the first three months of the approved program.

  8. Lasers in Dentistry: Is It Really Safe?

    Directory of Open Access Journals (Sweden)

    Hamed Mortazavi

    2016-01-01

    Full Text Available Introduction: Lasers are used in various disciplines in dentistry such as restorative dentistry, endodontics, periodontics, pedodontics, and oral and maxillofacial surgery. Despite many advantages of dental lasers, this method might have some adverse effects. The aim of this review article is to debate about the impacts of lasers on orodental tissues. Methods: An electronic search was accomplished using specialized databases such as Google Scholar, PubMed, PubMed Central, Science Direct, and Scopus to find relevant studies by using keywords such as “laser”, “dentistry”, “adverse effect”, and “side effect”. Results: Several adverse effects of laser were identified such as impacts on dental pulp, effects on tooth surface, subcutaneous and submucosal effects, histopathological changes, and infection transmission due to laser smoke. During dental procedures, necrosis of the pulp, periodontal ligament and odontoblasts, cemental lysis, bone resorption, hypo/hyperpigmentation, burns, itching, and scarring might occur. In addition, laser can weaken the dentin by inducing surface cracks. Restorative procedures by laser might increase microleakage and decrease shear bond strength, as well as microhardness of tooth walls. Meanwhile, laser surgery might cause emphysema after abscess incision and drainage, frenectomy, flap elevation, and gingivoplasty. Conclusion: Practitioners should be very cautious in treatment planning and case selection during laser-based therapeutic procedures.

  9. Biosmart Materials: Breaking New Ground in Dentistry

    Science.gov (United States)

    Badami, Vijetha; Ahuja, Bharat

    2014-01-01

    By definition and general agreement, smart materials are materials that have properties which may be altered in a controlled fashion by stimuli, such as stress, temperature, moisture, pH, and electric or magnetic fields. There are numerous types of smart materials, some of which are already common. Examples include piezoelectric materials, which produce a voltage when stress is applied or vice versa, shape memory alloys or shape memory polymers which are thermoresponsive, and pH sensitive polymers which swell or shrink as a response to change in pH. Thus, smart materials respond to stimuli by altering one or more of their properties. Smart behaviour occurs when a material can sense some stimulus from its environment and react to it in a useful, reliable, reproducible, and usually reversible manner. These properties have a beneficial application in various fields including dentistry. Shape memory alloys, zirconia, and smartseal are examples of materials exhibiting a smart behavior in dentistry. There is a strong trend in material science to develop and apply these intelligent materials. These materials would potentially allow new and groundbreaking dental therapies with a significantly enhanced clinical outcome of treatments. PMID:24672407

  10. Epigenetics: a new frontier in dentistry.

    Science.gov (United States)

    Williams, S D; Hughes, T E; Adler, C J; Brook, A H; Townsend, G C

    2014-06-01

    In 2007, only four years after the completion of the Human Genome Project, the journal Science announced that epigenetics was the 'breakthrough of the year'. Time magazine placed it second in the top 10 discoveries of 2009. While our genetic code (i.e. our DNA) contains all of the information to produce the elements we require to function, our epigenetic code determines when and where genes in the genetic code are expressed. Without the epigenetic code, the genetic code is like an orchestra without a conductor. Although there is now a substantial amount of published research on epigenetics in medicine and biology, epigenetics in dental research is in its infancy. However, epigenetics promises to become increasingly relevant to dentistry because of the role it plays in gene expression during development and subsequently potentially influencing oral disease susceptibility. This paper provides a review of the field of epigenetics aimed specifically at oral health professionals. It defines epigenetics, addresses the underlying concepts and provides details about specific epigenetic molecular mechanisms. Further, we discuss some of the key areas where epigenetics is implicated, and review the literature on epigenetics research in dentistry, including its relevance to clinical disciplines. This review considers some implications of epigenetics for the future of dental practice, including a 'personalized medicine' approach to the management of common oral diseases. © 2014 Australian Dental Association.

  11. Polarization sensitive optical coherence tomography in dentistry

    International Nuclear Information System (INIS)

    Dichtl, S.

    1998-01-01

    Optical coherence tomography (OCT) is a noninvasive and noncontact technique for obtaining cross-sectional images of biologic structure, which was initially introduced to depict the transparent tissue of the eye. It employs the partial coherence properties of a light source to image structures with high resolution (< 20 (m). Recently, this technique has also been applied in turbid media. This tomographic imaging is analogous to conventional ultrasound B mode imaging, except that OCT measures the intensity of backreflected infrared light rather than acoustical waves. First applications, of OCT in dentistry for diagnosing periodontal disease have been reported by Colston et al. presenting in vitro OCT images of the dental and periodontal tissues of porcine premolar teeth. In this work, the feasibility of polarisation sensitive OCT for dental material is suggested. In contrast with conventional OCT, where the magnitude of backscattered light as a function of depth is imaged, backscattered light is used to image the magnitude of the birefringence in the sample as a function of depth. Partial loss of birefringence is known to be an early indication of incipient caries or tissue thermal damage. Applying this technique for caries diagnosis or guidance regarding optimal dosimetry for thermally mediated laser therapeutic procedures, polarisation sensitive OCT would represent a promising new technology for dentistry. (author)

  12. Mesenchymal dental stem cells in regenerative dentistry.

    Science.gov (United States)

    Rodríguez-Lozano, Francisco-Javier; Insausti, Carmen-Luisa; Iniesta, Francisca; Blanquer, Miguel; Ramírez, María-del-Carmen; Meseguer, Luis; Meseguer-Henarejos, Ana-Belén; Marín, Noemí; Martínez, Salvador; Moraleda, José-María

    2012-11-01

    In the last decade, tissue engineering is a field that has been suffering an enormous expansion in the regenerative medicine and dentistry. The use of cells as mesenchymal dental stem cells of easy access for dentist and oral surgeon, immunosuppressive properties, high proliferation and capacity to differentiate into odontoblasts, cementoblasts, osteoblasts and other cells implicated in the teeth, suppose a good perspective of future in the clinical dentistry. However, is necessary advance in the known of growth factors and signalling molecules implicated in tooth development and regeneration of different structures of teeth. Furthermore, these cells need a fabulous scaffold that facility their integration, differentiation, matrix synthesis and promote multiple specific interactions between cells. In this review, we give a brief description of tooth development and anatomy, definition and classification of stem cells, with special attention of mesenchymal stem cells, commonly used in the cellular therapy for their trasdifferentiation ability, non ethical problems and acceptable results in preliminary clinical trials. In terms of tissue engineering, we provide an overview of different types of mesenchymal stem cells that have been isolated from teeth, including dental pulp stem cells (DPSCs), stem cells from human exfoliated deciduous teeth (SHEDs), periodontal ligament stem cells (PDLSCs), dental follicle progenitor stem cells (DFPCs), and stem cells from apical papilla (SCAPs), growth factors implicated in regeneration teeth and types of scaffolds for dental tissue regeneration.

  13. Stem cell-based approaches in dentistry

    Directory of Open Access Journals (Sweden)

    TA Mitsiadis

    2011-11-01

    Full Text Available Repair of dental pulp and periodontal lesions remains a major clinical challenge. Classical dental treatments require the use of specialised tissue-adapted materials with still questionable efficacy and durability. Stem cell-based therapeutic approaches could offer an attractive alternative in dentistry since they can promise physiologically improved structural and functional outcomes. These therapies necessitate a sufficient number of specific stem cell populations for implantation. Dental mesenchymal stem cells can be easily isolated and are amenable to in vitro expansion while retaining their stemness. In vivo studies realised in small and large animals have evidenced the potential of dental mesenchymal stem cells to promote pulp and periodontal regeneration, but have also underlined new important challenges. The homogeneity of stem cell populations and their quality control, the delivery method, the quality of the regenerated dental tissues and their integration to the host tissue are some of the key challenges. The use of bioactive scaffolds that can elicit effective tissue repair response, through activation and mobilisation of endogenous stem cell populations, constitutes another emerging therapeutic strategy. Finally, the use of stem cells and induced pluripotent cells for the regeneration of entire teeth represents a novel promising alternative to dental implant treatment after tooth loss. In this mini-review, we present the currently applied techniques in restorative dentistry and the various attempts that are made to bridge gaps in knowledge regarding treatment strategies by translating basic stem cell research into the dental practice.

  14. Biosmart Materials: Breaking New Ground in Dentistry

    Directory of Open Access Journals (Sweden)

    Vijetha Badami

    2014-01-01

    Full Text Available By definition and general agreement, smart materials are materials that have properties which may be altered in a controlled fashion by stimuli, such as stress, temperature, moisture, pH, and electric or magnetic fields. There are numerous types of smart materials, some of which are already common. Examples include piezoelectric materials, which produce a voltage when stress is applied or vice versa, shape memory alloys or shape memory polymers which are thermoresponsive, and pH sensitive polymers which swell or shrink as a response to change in pH. Thus, smart materials respond to stimuli by altering one or more of their properties. Smart behaviour occurs when a material can sense some stimulus from its environment and react to it in a useful, reliable, reproducible, and usually reversible manner. These properties have a beneficial application in various fields including dentistry. Shape memory alloys, zirconia, and smartseal are examples of materials exhibiting a smart behavior in dentistry. There is a strong trend in material science to develop and apply these intelligent materials. These materials would potentially allow new and groundbreaking dental therapies with a significantly enhanced clinical outcome of treatments.

  15. Neuromuscular dentistry: Occlusal diseases and posture.

    Science.gov (United States)

    Khan, Mohd Toseef; Verma, Sanjeev Kumar; Maheshwari, Sandhya; Zahid, Syed Naved; Chaudhary, Prabhat K

    2013-01-01

    Neuromuscular dentistry has been a controversial topic in the field of dentistry and still remains debatable. The issue of good occlusion and sound health has been repeatedly discussed. Sometimes we get complains of sensitive teeth and sometimes of tired facial muscles on getting up in the morning. Owing to the intimate relation of masticatory apparatus with the cranium and cervico-scapular muscular system, the disorders in any system, draw attention from concerned clinicians involved in management, to develop an integrated treatment protocol for the suffering patients. There may be patients reporting to the dental clinics after an occlusal restoration or extraction, having pain in or around the temporomandibular joint, headache or neck pain. Although their esthetic demands must not be undermined during the course of treatment plan, whenever dental treatment of any sort is planned, occlusion/bite should be given prime importance. Very few dentist are able to diagnose the occlusal disease and of those who diagnose many people resort to aggressive treatment modalities. This paper aims to report the signs of occlusal disease, and discuss their association with TMDs and posture.

  16. Bioactive Glasses in Dentistry: A Review

    Directory of Open Access Journals (Sweden)

    Abbasi Z

    2015-03-01

    Full Text Available Bioactive glasses are silicate-based and can form a strong chemical bond with the tissues. These biomaterials are highly biocompatible and can form a hydroxyapatite layer when implanted in the body or soaked in the simulated body fluid. Due to several disadvantages, conventional glass processing method including melting of glass components, is replaced by sol-gel method with a large number of benefits such as low processing temperature, higher purity and homogeneity and therefore better control of bioactivity. Bioactive glasses have a wide range of applications, particularly in dentistry. These glasses can be used as particulates or monolithic shapes and porous or dense constructs in different applications such as remineralization or hypersensitivity treatment. Some properties of bioactive glasses such as antibacterial properties can be promoted by adding different elements into the glass. Bioactive glasses can also be used to modify different biocompatible materials that need to be bioactive. This study reviews the significant developments of bioactive glasses in clinical application, especially dentistry. Furthermore, we will discuss the field of bioactive glasses from beginning to the current developments, which includes processing methods, applications, and properties of these glasses.

  17. Nano Era of Dentistry-An Update.

    Science.gov (United States)

    Maman, Paramjot; Nagpal, Manju; Gilhotra, Ritu Mehra; Aggarwal, Geeta

    2018-02-14

    Management of the health of oral tissues is a prime requirement in dentistry. The prevention of tooth decay and the treatment of lesions and cavities are ongoing challenges. The limitations in dental materials, medications, instruments, procedures put off the accomplishment of this goal. Rationalization of science and technology has made possible to work out these limitations. Nanotechnology which is the outcome of this rationalization has become one of the most favored technologies in medical and dental application. The substantial contribution of nano dental materials is the identification of oral health related problems by better diagnosis and management of dental disorders by bionanomaterials. Application of nanodentistry holds promise for comprehensive dental care by utilizing nanomaterials and ultimately by nanorobots. This review discusses the rationale of nanodentistry, nanocarriers researched in treatment of different dental diseases, the latest innovations in nanomaterials in various disciplines of dentistry; patent literature and related marketed products. Advances in nanotechnology have placed plenty of hopes in terms of improving the oral health care of dental patients. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  18. Tooth wear and wear investigations in dentistry.

    Science.gov (United States)

    Lee, A; He, L H; Lyons, K; Swain, M V

    2012-03-01

    Tooth wear has been recognised as a major problem in dentistry. Epidemiological studies have reported an increasing prevalence of tooth wear and general dental practitioners see a greater number of patients seeking treatment with worn dentition. Although the dental literature contains numerous publications related to management and rehabilitation of tooth wear of varying aetiologies, our understanding of the aetiology and pathogenesis of tooth wear is still limited. The wear behaviour of dental biomaterials has also been extensively researched to improve our understanding of the underlying mechanisms and for the development of restorative materials with good wear resistance. The complex nature of tooth wear indicates challenges for conducting in vitro and in vivo wear investigations and a clear correlation between in vitro and in vivo data has not been established. The objective was to critically review the peer reviewed English-language literature pertaining to prevalence and aetiology of tooth wear and wear investigations in dentistry identified through a Medline search engine combined with hand-searching of the relevant literature, covering the period between 1960 and 2011. © 2011 Blackwell Publishing Ltd.

  19. Health Professions Team Building through Pharmacy, Dentistry, Optometry, and Podiatry: The 1992-93 AACP Argus Commission Report.

    Science.gov (United States)

    Journal of Optometric Education, 1995

    1995-01-01

    The Argus Commission, asked to examine the interface between academic pharmacy and education programs in dentistry, optometry, and podiatry, envisioned a primary health care team and considered mechanisms for encouraging development of such teams and reducing competition. Its conclusions and recommendations are summarized here. (MSE)

  20. Anterior esthetics and the visual arts: beauty, elements of composition, and their clinical application to dentistry.

    Science.gov (United States)

    Valo, T S

    1995-01-01

    The challenge of developing a pleasing smile is an artistic venture. A study of how the visual arts have explored the nature of beauty and the elements of artistic composition will enhance our artistic abilities in cosmetic dentistry. This review discusses the perception of beauty and important features of that which we call beautiful. The discussion uses important works of art to demonstrate elements of composition, which are then made relevant in a dental application.

  1. DOD Residential Proton Exchange Membrane (PEM) Fuel Cell Demonstration Program. Volume 2. Summary of Fiscal Year 2001-2003 Projects

    Science.gov (United States)

    2005-09-01

    produced many of the Beatles 1970s recordings. This facility was selected to host the UK PEM demonstration project from a selection of four potential sites...funded the Department of Defense (DOD) Residential PEM Demonstration Project to demonstrate domestically-produced, residential Proton Exchange Membrane...PEM) fuel cells at DOD Facilities. The objectives were to: (1) assess PEM fuel cells’ role in supporting sustainability at military installations

  2. DOD Business Systems Modernization: Key Navy Programs' Compliance with DOD's Federated Business Enterprise Architecture Needs to be Adequately Demonstrated

    National Research Council Canada - National Science Library

    Hite, Randolph C; Lakhmani, Neela; Barkakati, Nabajyoti; Doherty, Neil; Glover, Nancy; Longcore, Emily; Holland, Michael; Le, Anh; Leiling, Josh; McCracken, Lee; Srikanth, Sushmita

    2008-01-01

    .... In particular, the programs BEA compliance assessments did not: * Include all relevant architecture products, such as products that specify the technical standards needed to promote interoperability among related systems...

  3. Office of Technology Development's Research, Development, Demonstration, Testing and Evaluation Mid-Year Program Review. Volume 2

    International Nuclear Information System (INIS)

    1994-01-01

    This document, Volume 2, presents brief summaries of programs being investigated at USDOE sites for waste processing, remedial action, underground storage tank remediation, and robotic applications in waste management

  4. Comparative study of faculties of dentistry of Rio de Janeiro and Universidade Federal da Paraiba in relation to teaching of radiation protection in Dentistry; Estudo comparativo das faculdades de odontologia do Rio de Janeiro e da Universidade Federal da Paraiba no tocante ao ensino da radioprotecao em odontologia

    Energy Technology Data Exchange (ETDEWEB)

    Padilha Filho, L.G. [Hospital Universitario Clementino Fraga Filho, Rio de Janeiro, RJ (Brazil); Fundacao Tecnico Educacional Souza Marques, Rio de Janeiro, RJ (Brazil); E-mail: lupadilha@ig.com.br; Raymundo Junior, R. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Faculdade de Odontologia; Koch, H.A. [Hospital Universitario Clementino Fraga Filho, Rio de Janeiro, RJ (Brazil). Dept. de Radiologia; Guedes, W.M.S. [Paraiba Univ., Joao Pessoa, PB (Brazil). Faculdade de Odontologia; Oliveira, L.C.G.; Berquo, F.R.; Cherchinaro, C.C. [Fundacao Tecnico Educacional Souza Marques, Rio de Janeiro, RJ (Brazil). Curso de Fisica

    2001-07-01

    This study compares the qualification and formation in radiation protection, of the students of Dentistry Faculties of Universities in Rio de Janeiro and Paraiba States (Brazil), and recommends the inclusion of Radiation Protection and Image Quality discipline, in the curriculum of Dentistry Faculties, in order to unify the contents and programs in the different study plans. Also to elaborate an appropriate educational training, so that the students of the Brazilian Universities can have the same knowledge about these important themes.

  5. The 100 most cited articles in dentistry.

    Science.gov (United States)

    Feijoo, Javier F; Limeres, Jacobo; Fernández-Varela, Marta; Ramos, Isabel; Diz, Pedro

    2014-04-01

    To identify the 100 most cited articles published in dental journals. A search was performed on the Institute for Scientific Information (ISI) Web of Science for the most cited articles in all the journals included in the Journal Citation Report (2010 edition) in the category of "Dentistry, Oral Surgery, and Medicine". Each one of the 77 journals selected was analyzed using the Cited Reference Search tool of the ISI Web of Science database to identify the most cited articles up to June 2012. The following information was gathered from each article: names and number of authors, journal, year of publication, type of study, methodological design, and area of research. The number of citations of the 100 selected articles varied from 326 to 2050. All articles were published in 21 of the 77 journals in the category. The journals with the largest number of the cited articles were the Journal of Clinical Periodontology (20 articles), the Journal of Periodontology (18 articles), and the Journal of Dental Research (16 articles). There was a predominance of clinical research (66 %) over basic research (34 %). The most frequently named author was Socransky SS, with 9 of the top 100 articles, followed by Lindhe J with 7. The decades with most articles published of the 100 selected were 1980-1989 (26 articles) and 1990-1999 (25 articles). The most common type of article was the case series (22 %), followed by the narrative review/expert opinion (19 %). The most common area of study was periodontology (43 % of articles). To our knowledge, this is the first report of the top-cited articles in Dentistry. There is a predominance of clinical studies, particularly case series and narrative reviews/expert opinions, despite their low-evidence level. The focus of the articles has mainly been on periodontology and implantology, and the majority has been published in the highest impact factor dental journals. The number of citations that an article receives does not necessarily reflect the

  6. Adequacy of patient pools to support predoctoral students' achievement of competence in pediatric dentistry in U.S. dental schools.

    Science.gov (United States)

    Casamassimo, Paul S; Seale, N Sue

    2015-06-01

    The aim of this study was to characterize the current status of predoctoral pediatric dentistry patient pools in U.S. dental schools and compare their status to that in 2001. A 2014 survey of school clinic-based and community-based dental patient pools was developed, piloted, and sent to pediatric predoctoral program directors in 57 U.S. dental schools via SurveyMonkey. Two follow-up contacts were made to increase the response rate. A total of 49 surveys were returned for a response rate of 86%. The responding program directors reported that their programs' patient pools had declined in number and had changed in character with more diversity and fewer procedures. They attributed the changes to competition, cost, and location of the dental school. The respondents reported that community-based dental education clinical sites continued to provide additional service experiences for dental students, with contributions varying by the nature of the site. A large number of the respondents felt that their graduates lacked some basic pediatric dentistry clinical skills and were not ready for independent practice with children. The results of this study suggest that the predoctoral pediatric dentistry patient pool has changed and general dentists may be graduating with inadequate experiences to practice dentistry for children.

  7. Treatment and disposal of radioactive wastes from nuclear power plants. Program for encapsulation, deep geologic deposition and research, development and demonstration; Kaernkraftavfallets behandling och slutfoervaring. Program foer inkapsling, geologisk djupfoervaring samt forskning, utveckling och demonstration

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    Programs for RD and D concerning disposal of radioactive waste are presented. Main topics include: Design, testing and manufacture of canisters for the spent fuels; Design of equipment for deposition of waste canisters; Material and process for backfilling rock caverns; Evaluation of accuracy and validation of methods for safety analyses; Development of methods for defining scenarios for the safety analyses. 471 refs, 67 figs, 21 tabs.

  8. A legislative program to plan energy strategies for the 21st century and to demonstrate the role of nuclear power

    International Nuclear Information System (INIS)

    McKlveen, J.W.; Blitz, P.

    1989-01-01

    In April 1989, the State Legislative Leaders Foundation and Arizona State University presented a national program, Energy Strategies for the 21st Century. Participants included state legislative leaders and key committee chairs from across the nation. The purpose of this program was to give legislative leaders an opportunity to examine and discuss many of the critical issues that will shape future energy policy. The participants were actively involved in developing realistic energy strategies. The scenarios had to use available and realistic future energy technologies. Their solutions were required to be both economically and environmentally compatible and acceptable to their constituents

  9. Creating an evidence-based dentistry culture at Baylor College of Dentistry: the winds of change.

    Science.gov (United States)

    Hinton, Robert J; Dechow, Paul C; Abdellatif, Hoda; Jones, Daniel L; McCann, Ann L; Schneiderman, Emet D; D'Souza, Rena

    2011-03-01

    In the early years of the new millennium, the National Institute of Dental and Craniofacial Research of the National Institutes of Health began funding Oral Health Research Education Grants using the R25 mechanism to promote the application of basic and clinical research findings to clinical training and to encourage students to pursue careers in oral health research. This report describes the impact of an R25 grant awarded to the Texas A&M Health Science Center's Baylor College of Dentistry (BCD) on its curriculum and faculty development efforts. At BCD, the R25 grant supports a multipronged initiative that employs clinical research as a vehicle for acquainting both students and faculty with the tools of evidence-based dentistry (EBD). New coursework and experiences in all four years of the curriculum plus a variety of faculty development offerings are being used to achieve this goal. Progress on these fronts is reflected in a nascent EBD culture characterized by increasing participation and buy-in by students and faculty. The production of a new generation of dental graduates equipped with the EBD skill set as well as a growing nucleus of faculty members who can model the importance of evidence-based practice is of paramount importance for the future of dentistry.

  10. The evidence-based dentistry initiative at Baylor College of Dentistry.

    Science.gov (United States)

    Jones, Daniel L; Hinton, Robert J; Dechow, Paul C; Abdellatif, Hoda; McCann, Ann L; Schneiderman, Emet D; D'Souza, Rena

    2011-02-01

    This report describes the impact of an R25 Oral Health Research Education Grant awarded to the Texas A&M Health Science Center-Baylor College of Dentistry (BCD) to promote the application of basic and clinical research findings to clinical training and encourage students to pursue careers in oral health research. At Baylor, the R25 grant supports a multi-pronged initiative that employs clinical research as a vehicle for acquainting both students and faculty with the tools of evidence-based dentistry (EBD). New coursework and experiences in all 4 years of the curriculum plus a variety of faculty development offerings are being used to achieve this goal. Progress on these fronts is reflected in a nascent "EBD culture" characterized by increasing participation and buy-in by students and faculty. The production of a new generation of dental graduates equipped with the EBD skill set as well as a growing nucleus of faculty who can model the importance of evidence-based practice is of paramount importance for the future of dentistry.

  11. Piezoelectric surgery in implant dentistry: clinical applications

    Directory of Open Access Journals (Sweden)

    Lydia Masako Ferreira

    2009-01-01

    Full Text Available Pizosurgery has therapeutic characteristics in osteotomies, such as extremely precise, selective and millimetric cuts and a clear operating field. Piezoelectricity uses ultrasonic frequencies, which cause the points specially designed for osteotomy to vibrate. The points of the instrument oscillate, allowing effective osteotomy with minimal or no injury to the adjacent soft tissues, membranes and nerve tissues. This article presents the various applications of piezoelectricity in oral implant surgery such as: removal of autogenous bone; bone window during elevation of the sinus membrane and removal of fractured implants. The cavitational effect caused by the vibration of the point and the spray of physiological solution, provided a field free of bleeding and easy to visualize. The study showed that the piezoelectric surgery is a new surgical procedurethat presents advantages for bone cutting in many situations in implant dentistry, with great advantages in comparison with conventional instrumentation. Operating time is longer when compared with that of conventional cutters.

  12. Plant Products for Innovative Biomaterials in Dentistry

    Directory of Open Access Journals (Sweden)

    Elena M. Varoni

    2012-07-01

    Full Text Available Dental biomaterials and natural products represent two of the main growing research fields, revealing plant-derived compounds may play a role not only as nutraceuticals in affecting oral health, but also in improving physico-chemical properties of biomaterials used in dentistry. Therefore, our aim was to collect all available data concerning the utilization of plant polysaccharides, proteins and extracts rich in bioactive phytochemicals in enhancing performance of dental biomaterials. Although compelling evidences are suggestive of a great potential of plant products in promoting material-tissue/cell interface, to date, only few authors have investigated their use in development of innovative dental biomaterials. A small number of studies have reported plant extract-based titanium implant coatings and periodontal regenerative materials. To the best of our knowledge, this review is the first to deal with this topic, highlighting a general lack of research findings in an interesting field which still needs to be investigated.

  13. [Forensic analysis of injuries in dentistry].

    Science.gov (United States)

    Heltai, Nóra; Baráth, Zoltán; Kereszty, Éva M

    2016-03-13

    Documentation and evaluation of dental injuries in forensic medicine are rather problematic. It needs a professional work up why dental injuries are out of focus, and how the diagnosis, pattern and treatment are influenced by novel approaches of dentistry. The aims of the authors were to characterize dental injuries, to compare their own findings to literature data concerning the type and characteristics of injuries, and propose a diagnostic workflow. Expert's reports between 2009 and 2013 at the Department of Forensic Medicine, University of Szeged were reviewed. Review of about 7000 reports revealed only 20 cases with dental injury, which is in contrast with literature data indicating a significantly higher frequency of dental injuries. Although the number of "dental cases" was low, there were several additional cases where the trauma probably affected the teeth but the injury was not documented. In future more attention is needed in forensic evaluation of the mechanism, therapeutic strategy and prognosis of dental injuries.

  14. Gene Therapy and its applications in Dentistry

    Directory of Open Access Journals (Sweden)

    Sharma Lakhanpal Manisha

    2006-01-01

    Full Text Available This era of advanced technology is marked by progress in identifying and understanding the molecular and cellular cause of a disease. With the conventional methods of treatment failing to render satisfactory results, gene therapy is not only being used for the cure of inherited diseases but also the acquired ones. The broad spectrum of gene therapy includes its application in the treatment of oral cancer and precancerous conditions and lesions, treatment of salivary gland diseases, bone repair, autoimmune diseases, DNA vaccination, etc. The aim of this article is to throw light on the history, methodology, applications and future of gene therapy as it would change the nature and face of dentistry in the coming years.

  15. Nanotechnology applications in medicine and dentistry.

    Science.gov (United States)

    Gupta, Jyoti

    2011-05-01

    Nanotechnology, or nanoscience, refers to the research and development of an applied science at the atomic, molecular, or macromolecular levels (i.e. molecular engineering, manufacturing). The prefix "nano" is defined as a unit of measurement in which the characteristic dimension is one billionth of a unit. Although the nanoscale is small in size, its potential is vast. As nanotechnology expands in other fields, clinicians, scientists, and manufacturers are working to discover the uses and advances in biomedical sciences. Applications of nanotechnology in medical and dental fields have only approached the horizon with opportunities and possibilities for the future that can only be limited by our imagination. This paper provides an early glimpse of nanotechnology applications in medicine and dentistry to illustrate their potentially far-reaching impacts on clinical practice. It also narrates the safety issues concerning nanotechnology applications. © 2011 Blackwell Publishing Asia Pty Ltd.

  16. The appraisal of clinical guidelines in dentistry.

    Science.gov (United States)

    Glenny, Anne-Marie; Worthington, Helen V; Clarkson, Jan E; Esposito, Marco

    2009-01-01

    To appraise the reported processes involved in the development of published dental guidelines. Electronic databases were searched to identify guidelines making recommendations for any health professional within dentistry. All included guidelines were appraised using the Appraisal of Guidelines Research and Evaluation (AGREE) instrument. A total of 105 guidelines met the inclusion criteria. The appraised guidelines showed lack of rigour in their development (median score 14.3%; range 0% to 100%). Only 10 (9.5%) were coded as 'strongly recommend' by at least two assessors. If recommendations within clinical guidelines are to be relied upon, the methods used in their development must be explicit and free from bias. When using the AGREE checklist to make decisions on whether or not to implement individual sets of guidelines, the findings of the present assessment reinforce the need for more than two assessors to be included in the appraisal of each set of guidelines.

  17. Corrosion resistance of titanium alloys for dentistry

    International Nuclear Information System (INIS)

    Laskawiec, J.; Michalik, R.

    2001-01-01

    Titanium and its alloys belong to biomaterials which the application scope in medicine increases. Some properties of the alloys, such as high mechanical strength, low density, low Young's modulus, high corrosion resistance and good biotolerance decide about it. The main areas of the application of titanium and its alloys are: orthopedics and traumatology, cardiosurgery, faciomaxillary surgery and dentistry. The results of investigations concerning the corrosion resistance of the technical titanium and Ti6Al14V alloy and comparatively a cobalt alloy of the Vitallium type in the artificial saliva is presented in the work. Significantly better corrosion resistance of titanium and the Ti6Al14V than the Co-Cr-Mo alloy was found. (author)

  18. The role of hypnotherapy in dentistry.

    Science.gov (United States)

    Facco, Enrico; Zanette, Gastone; Casiglia, Edoardo

    2014-01-01

    Dental fear is a universal phenomenon justifying the increasing relevance of psychology and the behavioural sciences to dental training and clinical practice. Pharmacological sedation has been used more and more over the past two decades, in order to relieve dental anxiety and phobia and let the patient face oral surgery safely. Hypnosis is a still underused but powerful non-pharmacological tool in dentistry. It provides an effective sedation whilst maintaining patient collaboration, but it also may help patients recovering from dental anxiety and phobia as well as those with a severe gag reflex. While pharmacological sedation affords a temporary respite and helps the patient to cope with a single procedure, hypnosis can effectively allow for both an excellent sedation in a physiological way and the treatment of patients' anxiety, or substantially decrease the doses used for sedative and analgesic drugs when these are needed.

  19. A systematic review of the uses of fluoroscopy in dentistry.

    Science.gov (United States)

    Uzbelger Feldman, Daniel; Yang, Jie; Susin, Cristiano

    2010-01-01

    To determine the quality of the evidence for the uses of fluoroscopy in dentistry. A systematic review using Ovid and MEDLINE was conducted to identify papers showing the uses of fluoroscopy in dentistry published between 1953 and September 2009. Human, animal and phantom/skull/mannequin studies on fluoroscopy with regard to its diagnostic value, research performance, and clinical and safety applications in dentistry were included in this analysis. Studies that were not in English, as well as those that employed fluoroscopy in dentistry without the use of image intensification, were excluded. Articles were evaluated, classified and graded by levels of evidence. Fifty-five out of 139 papers fulfilled the inclusion criteria. Amongst them, 19 were related to diagnosis, 15 to research, 12 to clinical and nine to safety applications. Fluoroscopy has contributed to nine different areas of dentistry. Also, it was used on 895 dental patients, 37 animals and 17 phantoms/skulls/mannequins. Two randomised controlled trials, two cohort studies, two case controls, 48 case reports and one expert opinion were found. Fluoroscopy with image intensification has been a useful, but not consistently used tool in dentistry for over 50 years. Several lines of evidence have shown fluoroscopy's diagnostic potential, research use, and clinical and safety applications in dentistry.

  20. Use of net present value analysis to evaluate a publicly funded biomass-to-ethanol research, development, and demonstration program and valuate expected private sector participation.

    Science.gov (United States)

    Hinman, N D; Yancey, M A

    1998-01-01

    One of the functions of government is to invest tax dollars in programs, projects, and properties that will result in greater public benefit than would have resulted from leaving the tax dollars in the private sector or using them to pay off the public debt. This paper describes the use of Net Present Value (NPV) as an approach to analyze and select investment opportunities for government money in public research, development, and demonstration (RD&D) programs and to evaluate potential private sector participation in the programs. This approach is then applied to a specific biomass-to-ethanol opportunity in California.

  1. Current applications of nanotechnology in dentistry: a review.

    Science.gov (United States)

    Bhavikatti, Shaeesta Khaleelahmed; Bhardwaj, Smiti; Prabhuji, M L V

    2014-01-01

    With the increasing demand for advances in diagnosis and treatment modalities, nanotechnology is being considered as a groundbreaking and viable research subject. This technology, which deals with matter in nanodimensions, has widened our views of poorly understood health issues and provided novel means of diagnosis and treatment. Researchers in the field of dentistry have explored the potential of nanoparticles in existing therapeutic modalities with moderate success. The key implementations in the field of dentistry include local drug delivery agents, restorative materials, bone graft materials, and implant surface modifications. This review provides detailed insights about current developments in the field of dentistry, and discusses potential future uses of nanotechnology.

  2. Preliminary test results from a free-piston Stirling engine technology demonstration program to support advanced radioisotope space power applications

    International Nuclear Information System (INIS)

    White, Maurice A.; Qiu Songgang; Augenblick, Jack E.

    2000-01-01

    Free-piston Stirling engines offer a relatively mature, proven, long-life technology that is well-suited for advanced, high-efficiency radioisotope space power systems. Contracts from DOE and NASA are being conducted by Stirling Technology Company (STC) for the purpose of demonstrating the Stirling technology in a configuration and power level that is representative of an eventual space power system. The long-term objective is to develop a power system with an efficiency exceeding 20% that can function with a high degree of reliability for up to 15 years on deep space missions. The current technology demonstration convertors (TDC's) are completing shakedown testing and have recently demonstrated performance levels that are virtually identical to projections made during the preliminary design phase. This paper describes preliminary test results for power output, efficiency, and vibration levels. These early results demonstrate the ability of the free-piston Stirling technology to exceed objectives by approximately quadrupling the efficiency of conventional radioisotope thermoelectric generators (RTG's)

  3. Preliminary test results from a free-piston Stirling engine technology demonstration program to support advanced radioisotope space power applications

    Science.gov (United States)

    White, Maurice A.; Qiu, Songgang; Augenblick, Jack E.

    2000-01-01

    Free-piston Stirling engines offer a relatively mature, proven, long-life technology that is well-suited for advanced, high-efficiency radioisotope space power systems. Contracts from DOE and NASA are being conducted by Stirling Technology Company (STC) for the purpose of demonstrating the Stirling technology in a configuration and power level that is representative of an eventual space power system. The long-term objective is to develop a power system with an efficiency exceeding 20% that can function with a high degree of reliability for up to 15 years on deep space missions. The current technology demonstration convertors (TDC's) are completing shakedown testing and have recently demonstrated performance levels that are virtually identical to projections made during the preliminary design phase. This paper describes preliminary test results for power output, efficiency, and vibration levels. These early results demonstrate the ability of the free-piston Stirling technology to exceed objectives by approximately quadrupling the efficiency of conventional radioisotope thermoelectric generators (RTG's). .

  4. Conundrums in merging public policy into private dentistry: experiences from Australia's recent past.

    Science.gov (United States)

    Lam, Raymond; Kruger, Estie; Tennant, Marc

    2015-04-01

    Oral disease continues to be a major problem in Australia impacting quality of life, the economy and broader health system. Although the understanding of caries and periodontal disease has improved along with increased government support, oral diseases continue to be the most prevalent among all health conditions. This is despite unprecedented levels of funding in the Chronic Disease Dental Scheme and the Teen Dental Plan. Access to primary care dentistry in the private sector, where the majority of dental services are provided, remains a critical issue. Under the current system of dentistry, it cannot be assumed that the practice of dentistry represents a prioritised approach to combat disease patterns based on scientific evidence in primary health and prevention. Drawing on data in relation to these two programs, the present study highlights issues impacting dental service provision. This includes issues such as access and affordability to dental care, sustainability of policy and its unintended consequences, private practice pressures and the impact of remuneration on treatment. This paper argues that without structural reform there will continue to be barriers in implementing policies capable of improving oral health.

  5. Program management plan for development, demonstration, testing, and evaluation efforts associated with Oak Ridge Reservation's Land Disposal Restrictions Federal Facility Compliance Agreement

    International Nuclear Information System (INIS)

    Conley, T.B.

    1994-04-01

    This program management plan covers the development, demonstration, testing, and evaluation efforts necessary to identify treatment methods for all the waste listed in Appendix B of the ORR's LDR/FFCA as well as any new wastes which meet Appendix B criteria. To successfully identify a treatment method, at least a proof-of-principle level of understanding must be obtained: that is, the candidate processes must be demonstrated as effective in treating the wastes to the LDR; however, an optimized process is not required. Where applicable and deemed necessary and where the budgets will support them, pilot-scale demonstrations will be pursued. The overall strategy being adopted in this program will be composed of the following activities: Scoping of the study; characterization; development and screening of alternatives; treatability investigations; and detailed analysis of alternatives

  6. Rel8: demonstrating the feasibility of delivering an 8-week social skills program in a public mental health setting.

    Science.gov (United States)

    Wauchope, Bronwyn; Terlich, Alissa; Lee, Stuart

    2016-06-01

    As community mental health services integrate recovery-oriented practices, treatments that focus on skills development and social integration are desirable. This study aimed to examine the feasibility of implementing "Rel8", an 8-week social skills training group adapted to suit a public community mental health setting. A retrospective audit was conducted of quantitative and qualitative data from four groups run between 2011 and 2013. Pre- and post-group measures were collected, assessing self-rated friendships and confidence with social skills and clinician-rated social skill performance. Qualitative feedback about group participation was also collected through use of a developed questionnaire. Analysis revealed significant improvements in participants' confidence with their social skills following group participation, with a trend also found for improved social skill performance. "Rel8", an adapted 8-week social skills training group, is a feasible program in the context of community mental health services. The program added to the recovery-centred practice of the community mental health service while also adding to the diversity of clinician skills for psychosocial-oriented practice. © The Royal Australian and New Zealand College of Psychiatrists 2015.

  7. Skin cancer has a large impact on our public hospitals but prevention programs continue to demonstrate strong economic credentials.

    Science.gov (United States)

    Shih, Sophy T F; Carter, Rob; Heward, Sue; Sinclair, Craig

    2017-08-01

    While skin cancer is still the most common cancer in Australia, important information gaps remain. This paper addresses two gaps: i) the cost impact on public hospitals; and ii) an up-to-date assessment of economic credentials for prevention. A prevalence-based cost approach was undertaken in public hospitals in Victoria. Costs were estimated for inpatient admissions, using State service statistics, and outpatient services based on attendance at three hospitals in 2012-13. Cost-effectiveness for prevention was estimated from 'observed vs expected' analysis, together with program expenditure data. Combining inpatient and outpatient costs, total annual costs for Victoria were $48 million to $56 million. The SunSmart program is estimated to have prevented more than 43,000 skin cancers between 1988 and 2010, a net cost saving of $92 million. Skin cancer treatment in public hospitals ($9.20∼$10.39 per head/year) was 30-times current public funding in skin cancer prevention ($0.37 per head/year). At about $50 million per year for hospitals in Victoria alone, the cost burden of a largely preventable disease is substantial. Skin cancer prevention remains highly cost-effective, yet underfunded. Implications for public health: Increased funding for skin cancer prevention must be kept high on the public health agenda. Hospitals would also benefit from being able to redirect resources to non-preventable conditions. © 2017 The Authors.

  8. The complexity of patient safety reporting systems in UK dentistry.

    Science.gov (United States)

    Renton, T; Master, S

    2016-10-21

    Since the 'Francis Report', UK regulation focusing on patient safety has significantly changed. Healthcare workers are increasingly involved in NHS England patient safety initiatives aimed at improving reporting and learning from patient safety incidents (PSIs). Unfortunately, dentistry remains 'isolated' from these main events and continues to have a poor record for reporting and learning from PSIs and other events, thus limiting improvement of patient safety in dentistry. The reasons for this situation are complex.This paper provides a review of the complexities of the existing systems and procedures in relation to patient safety in dentistry. It highlights the conflicting advice which is available and which further complicates an overly burdensome process. Recommendations are made to address these problems with systems and procedures supporting patient safety development in dentistry.

  9. Code of practice for radiological protection in dentistry

    International Nuclear Information System (INIS)

    1988-01-01

    This Code of Practice applies to all those involved in the practice of dentistry and is designed to minimise radiation doses to patients, dental staff and the public from the use of dental radiographic equipment

  10. Filed and granted Indian Patents in dentistry from 2005-2009: a critical analysis and review.

    Science.gov (United States)

    Bijle, Mohammed Nadeem Ahmed; Patil, Shankargouda

    2013-01-01

    Patent policies have proved to be extremely important for several countries to develop. India has achieved its global status since 2005; a critical analysis of the patents at IPO will help us to identify the potential, available for patents with Indian Dental Fraternity. The aim of this study is to critically analyze and review Indian Patents in the field of Dentistry from 2005-2009 for evaluation of status of Indian Patents in Dentistry. A total of 110 patents were scrutinized from 2005-2009 available by IPO on www.patentoffice.nic.in. Following which a preliminary data were collected from individual patents and recorded in a record sheet. The data collected were analyzed using SPSS 16.0 software and were subjected to ANOVA test. All patents scrutinized were applied for dental materials (100%). Company applicants (70%) were the maximum followed by the individual applicants (27.2%). A total of 87.3% of patents had enrolled for International Application. Priority country had maximum favor with USA (39.2%) followed by Europe (36.1%). Single inventors (44.5%) were the maximum followed by two inventors (22.7%). Europe (37.3%) had the maximum first inventor, followed by United States of America (30%) and India (10.9%). Individual inventors were maximum in Europe (38.8%) followed by USA (20.4%) and India (16.3%). Contribution from Indian Nationals as inventors for patents in the field of Dentistry is limited, thus reducing the pace of progress and development. Indian inventors in the field of Dentistry have to go a long way to compete with the fellow mates of developed countries like USA and Europe. Continuing Dental Education programs on Intellectual property rights should be conducted on regular basis especially for Dentist's involved in research.

  11. [Dentistry in Korean during the Japanese occupation].

    Science.gov (United States)

    Shin, Jae-Eu

    2004-12-01

    The Japanese introduction of dentistry into Korea was for treating the Japanese residing in Korea Noda-Oji was the first Japanese dentist for Japanese people in Korea in 1893, and Narajaki doyoyo, an invited dentist was posted in the Korean headquarter of Japanese army in September, 1905. The imperialist Japan licensed the dental technicians (yipchisa) without limit and controlled them generously so they could practice dentistry freely. This measure was contrary to that in Japan. (In Japan no new dental technician was licensed.) Komori, a dental technician opened his laboratory at Chungmuro in 1902. The dental technician had outnumbered by 1920. In 1907, the first Korean dental technician Sung-Ryong Choi practiced dentistry in Jongno. The imperialist Japan made the regulations for dental technicians to set a limit to the advertisement and medical practice of dental technicians. The first Korean dentists Suk-Tae Ham was register No. 1 in the dentist license. The Kyungsung dental school was established by Nagira Dasoni for the purpose of educating some Korean people that contributed to Japanese colonization. It made progress with the help of Japan, it was was given the approval of the establishment of the professional school in January the 25th, 1929. It was intended to produce Korean dentists in the first place but became the school for Japanese students later on. The association of Chosun dentist, which had been founded by Narajaki doyoyo, was managed by Japanese dentists in favor of the colonial ruling. The Hansung Association of Dentists established in 1925 was the organization made by the necessity of the association for Koreans only. The Japanese forcefully annexed the Association of Hansung Dentists (Koreans only) to the Association of Kyungsung Dentists to avoid collective actions of Korean dentists in the name of 'Naesunilche' -- 'Japan and Korea and one'. Their invading intention was shown in the event of 'decayed tooth preventive day'. Japanese controlled

  12. Dentistry in Korea during the Japanese Occupation

    Directory of Open Access Journals (Sweden)

    SHIN Jae-Eu

    2004-12-01

    Full Text Available The Japanese introduction of dentistry into Korea was for treating the Japanese residing in Korea Noda-Oji was the first Japanese dentist for Japanese people in Korea in 1893. and Narajaki doyoyo, an invited dentist was posted in the Korean headquarter of Japanese army in september, 1905. The imperialist Japan licensed the dental technicians(yipchisa without limit and controled them generously so they could practice dentistry freely. This measure was contrary to that in Japan. (In Japan no new dental technician was licensed. Komori, a dental technician opened his laboratory at Chungmuro in 1902. The dental technician had outnumerbered by 1920. In 1907, the first Korean dental technician Sung-Ryong Choi practiced dentistry in Jongno. The imperialist Japan made the regulation for dental technicians to set a limit to the advertisement and medical practice of dental technicians. The first Korean dentist Suk-Tae Ham was registered No. 1 in the dentist license. The Kyungsung dental school was established by Nagira Dasoni for the purpose of educating some korean people that contributed to Japanese colonization. It made progress with the help of Japan. it was given the approval of the establishment of the professional school in January the 25th, 1929. it was intended to produce Korean dentists in the first place but became the school for Japanese students later on. The association of Chosun dentist, which had been founded by Narajaki doyoyo, was managed by Japanese dentists in favor of the colonial ruling. The Hansung Association of Dentists established in 1925 was the organization made by the necessity of the association for Koreans only. the Japanese forcefully annexed the Association of Hansung Dentists (Koreans only to the Association of Kyungsung Dentists to avoid collective actions of Korean dentists in the name of 'Naesunilche'--'Japan and Korea are one'. Their invading intention was shown in the event of 'decayed tooth preventive day'. Japanese

  13. Lithium-ion Battery Demonstration for the 2007 NASA Desert Research and Technology Studies (Desert RATS) Program

    Science.gov (United States)

    Bennett, William; Baldwin, Richard

    2007-01-01

    The NASA Glenn Research Center (GRC) Electrochemistry Branch designed and produced five lithium-ion battery packs for demonstration in a portable life support system (PLSS) on spacesuit simulators. The experimental batteries incorporated advanced, NASA-developed electrolytes and included internal protection against over-current, over-discharge and over-temperature. The 500-gram batteries were designed to deliver a constant power of 38 watts over 103 minutes of discharge time (130 Wh/kg). Battery design details are described and field and laboratory test results are summarized.

  14. Willow Park II Community Center. Design report for the passive solar commercial buildings design assistance and demonstration program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-01-15

    The design process for a passive solar community center in Texas is documented. Weather data are given. Energy analysis for early drawings is performed using the ENERGYLOOK program and the results shown graphically. Energy consumption and cost data are given. The design evolution is then traced and the performance of alternative designs compared. Design indicators for best strategies and concepts are discussed and the final design is presented. Energy consumption and cost are given, along with incremental passive solar design costs. A schematic review meeting report and life cycle value tables are included. Overviews, unavailable information, incremental passive design costs, performance comparison of alternatives, and architectural compatibility are discussed for each step in the design process. (LEW)

  15. Retrospective review of voluntary reports of nonsurgical paresthesia in dentistry.

    Science.gov (United States)

    Gaffen, Andrew S; Haas, Daniel A

    2009-10-01

    Paresthesia is an adverse event that may be associated with the administration of local anesthetics in dentistry. The purpose of this retrospective study was to analyze cases of paresthesia associated with local anesthetic injection that were voluntarily reported to Ontario"s Professional Liability Program (PLP) from 1999 to 2008 inclusive, to see if the findings were consistent with those from 1973 to 1998 from this same source. All cases of nonsurgical paresthesia reported from 1999 to 2008 were reviewed; cases involving surgical procedures were excluded. Variables examined included patient age and gender, type and volume of local anesthetic, anatomic site of nerve injury, affected side and pain on injection or any other symptoms. During the study period, 182 PLP reports of paresthesia following nonsurgical procedures were made; all but 2 were associated with mandibular block injection. There was no significant gender predilection, but the lingual nerve was affected more than twice as frequently as the inferior alveolar nerve. During 2006-2008 alone, 64 cases of nonsurgical paresthesia were reported to PLP, a reported incidence of 1 in 609,000 injections. For the 2 local anesthetic drugs available in dental cartridges as 4% solutions, i.e., articaine and prilocaine, the frequencies of reporting of paresthesia were significantly greater than expected (chi2, exact binomial distribution; p paresthesia.

  16. Exploring leadership in the context of dentistry in the UK.

    Science.gov (United States)

    Willcocks, Stephen George

    2016-05-03

    Purpose The purpose of this paper is to explore selective leadership approaches in the context of dentistry in the UK. Design/methodology/approach This is a conceptual paper utilising published sources from relevant literature about leadership theory and practice and the policy background to dentistry in the UK. Findings This paper suggests that there is merit in identifying and applying an eclectic mix of leadership theory to the case of dentistry. It offers insight into individual aspects of the leadership role for dentists and applies this to the dental context. It also contrasts these individual approaches with shared leadership and suggests this may also be relevant to dentistry. It highlights the fact that leadership will be of growing concern for dentistry in the light of recent policy changes. Research limitations/implications This paper points out that there are developmental implications depending on the particular approach taken. It argues that leadership development will become increasingly important in dentistry in the UK. Originality/value This paper addresses a topic that has so far received limited attention in the literature.

  17. Practice of preventive dentistry for nursing staff in primary care

    Science.gov (United States)

    Acuña-Reyes, Raquel; Cigarroa-Martínez, Didier; Ureña-Bogarín, Enrique; Orgaz-Fernández, Jose David

    2014-01-01

    Objectives: Determine the domain of preventive dentistry in nursing personnel assigned to a primary care unit. Methods: Prospective descriptive study, questionnaire validation, and prevalence study. In the first stage, the questionnaire for the practice of preventive dentistry (CPEP, for the term in Spanish) was validated; consistency and reliability were measured by Cronbach's alpha, Pearson's correlation, factor analysis with intra-class correlation coefficient (ICC). In the second stage, the domain in preventive dental nurses was explored. Results: The overall internal consistency of CPEP is α= 0.66, ICC= 0.64, CI95%: 0.29-0.87 (p >0.01). Twenty-one subjects in the study, average age 43, 81.0% female, average seniority of 12.5 were included. A total of 71.5% showed weak domain, 28.5% regular domain, and there was no questionnaire with good domain result. The older the subjects were, the smaller the domain; female nurses showed greater mastery of preventive dentistry (29%, CI95%: 0.1-15.1) than male nurses. Public health nurses showed greater mastery with respect to other categories (50%, CI95%: 0.56-2.8). Conclusions: The CDEP has enough consistency to explore the domain of preventive dentistry in health-care staff. The domain of preventive dentistry in primary care nursing is poor, required to strengthen to provide education in preventive dentistry to the insured population. PMID:25386037

  18. A global probe into dental student perceptions about philanthropy, global dentistry and international student exchanges.

    Science.gov (United States)

    Ivanoff, Chris S; Yaneva, Krassimira; Luan, Diana; Andonov, Bogomil; Kumar, Reena R; Agnihotry, Anirudha; Ivanoff, Athena E; Emmanouil, Dimitrios; Volpato, Luiz Evaristo Ricci; Koneski, Filip; Muratovska, Ilijana; Al-Shehri, Huda A; Al-Taweel, Sara M; Daly, Michele

    2017-04-01

    Training culturally competent graduates who can practice effectively in a multicultural environment is a goal of contemporary dental education. The Global Oral Health Initiative is a network of dental schools seeking to promote global dentistry as a component of cultural competency training. Before initiating international student exchanges, a survey was conducted to assess students' awareness of global dentistry and interest in cross-national clerkships. A 22-question, YES/NO survey was distributed to 3,487 dental students at eight schools in seven countries. The questions probed students about their school's commitment to enhance their education by promoting global dentistry, volunteerism and philanthropy. The data were analysed using Vassarstats statistical software. In total, 2,371 students (67.9%) completed the survey. Cultural diversity was seen as an important component of dental education by 72.8% of the students, with two-thirds (66.9%) acknowledging that their training provided preparation for understanding the oral health care needs of disparate peoples. A high proportion (87.9%) agreed that volunteerism and philanthropy are important qualities of a well-rounded dentist, but only about one-third felt that their school supported these behaviours (36.2%) or demonstrated a commitment to promote global dentistry (35.5%). In addition, 87.4% felt that dental schools are morally bound to improve oral health care in marginalised global communities and should provide students with international exchange missions (91%), which would enhance their cultural competency (88.9%) and encourage their participation in charitable missions after graduation (67.6%). The study suggests that dental students would value international exchanges, which may enhance students' knowledge and self-awareness related to cultural competence. © 2016 FDI World Dental Federation.

  19. Office of Technology Development FY 1993 program summary: Office of Research and Development, Office of Demonstration, Testing and Evaluation. Revision 1

    International Nuclear Information System (INIS)

    1994-02-01

    This report summarizes significant FY93 programmatic information and accomplishments relevant to the individual activities within the Office of Technology Development Program for Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E). A brief discussion of the mission of the Office of Environmental Restoration and Waste Management (EM) and the Office of Technology Development is presented. An overview is presented of the major problem areas confronting DOE. These problem areas include: groundwater and soils cleanup; waste retrieval and processing; and pollution prevention. The organizational elements within EM are highlighted. An EM-50 Funding Summary for FY92 and FY93 is also provided. RDDT ampersand E programs are discussed and their key problem areas are summarized. Three salient program-formulating concepts are explained. They are: Integrated Demonstrations, Integrated Programs, and the technology window of opportunity. Detailed information for each of the programs within RDDT ampersand E is presented and includes a fact sheet, a list of technical task plans and an accomplishments and objectives section

  20. Office of Technology Development FY 1993 program summary: Office of Research and Development, Office of Demonstration, Testing and Evaluation. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    This report summarizes significant FY93 programmatic information and accomplishments relevant to the individual activities within the Office of Technology Development Program for Research, Development, Demonstration, Testing, and Evaluation (RDDT&E). A brief discussion of the mission of the Office of Environmental Restoration and Waste Management (EM) and the Office of Technology Development is presented. An overview is presented of the major problem areas confronting DOE. These problem areas include: groundwater and soils cleanup; waste retrieval and processing; and pollution prevention. The organizational elements within EM are highlighted. An EM-50 Funding Summary for FY92 and FY93 is also provided. RDDT&E programs are discussed and their key problem areas are summarized. Three salient program-formulating concepts are explained. They are: Integrated Demonstrations, Integrated Programs, and the technology window of opportunity. Detailed information for each of the programs within RDDT&E is presented and includes a fact sheet, a list of technical task plans and an accomplishments and objectives section.

  1. Industrial Fuel Gas Demonstration-Plant Program. Volume II. The environment (Deliverable No. 27). [Baseline environmental data

    Energy Technology Data Exchange (ETDEWEB)

    1979-08-01

    The proposed site of the Industrial Fuel Gas Demonstration Plant (IFGDP) is located on a small peninsula extending eastward into Lake McKeller from the south shore. The peninsula is located west-southwest of the City of Memphis near the confluence of Lake McKeller and the Mississippi River. The environmental setting of this site and the region around this site is reported in terms of physical, biological, and human descriptions. Within the physical description, this report divides the environmental setting into sections on physiography, geology, hydrology, water quality, climatology, air quality, and ambient noise. The biological description is divided into sections on aquatic and terrestrial ecology. Finally, the human environment description is reported in sections on land use, demography, socioeconomics, culture, and visual features. This section concludes with a discussion of physical environmental constraints.

  2. Quality assurance plan for placement of cold-cap grout, demonstration vault, Hanford Grout Vault Program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Harrington, P.T.; Wakeley, L.D.; Ernzen, J.J.; Walley, D.M.

    1992-08-01

    During FY 91, the U.S. Army Engineer Waterways Experiment Station (WES) developed a grout to be used as a cold cap, a nonradioactive layer, between the solidified waste and the cover blocks of a demonstration waste disposal vault at the U.S. Department of Energy Hanford Facility. This document recommends requirements for a quality assurance (QA) plan for field mixing and placing of the cold-cap grout during final closure of the demonstration vault. Preplacement activities emphasize selection and testing of materials that will match the performance of materials used in the WES grout. Materials sources and applicable American Society of Testing and Materials, American Concrete Institute, and American Petroleum Institute specifications and requirements are provided. Archiving of physical samples of materials is essential, in addition to careful maintenance of test reports and laboratory data. Full-scale field trial mixing and a detailed preconstruction conference are recommended. Placement activities focus on production and placement of a grout that remains sufficiently constant throughout all batches and meets performance requirements. QA activities must be coordinated between the batch plant and delivery site. Recommended sampling during placement includes cylinders cast for subsequent tests of compressive strength and for nondestructive evaluation and prisms cast for monitoring volume stability. A minimum of two lifts is recommended. Postplacement activities include long-term monitoring of the properties of grout specimens cast during placement. Minimum testing of cylinders includes pulse velocity, fundamental frequency, and unconfined compressive strength. Monitoring characteristics of the microstructure also are recommended. The QA plan should designate an organization to have responsibility for maintaining complete records, reports, and archived samples, including details of deviations from plans written before field placement.

  3. New Technology Demonstration Program - Results of an Attempted Field Test of Multi-Layer Light Polarizing Panels in an Office Space

    Energy Technology Data Exchange (ETDEWEB)

    Richman, Eric E.

    2001-06-14

    An assessment of the potential energy savings associated with the use of multi-layer light polarizing panels in an office space was initiated as part of the Department of Energy's (DOE) Federal Energy Management Program (FEMP) New Technology Demonstration Program (NTDP) in 1997. This project was intended to provide information on the effectiveness and application of this technology that could help federal energy managers and other interested individuals determine whether this technology had benefits for their occupied spaces. The use of an actual working office area provided the capability of evaluating the technology's effectiveness in the real world.

  4. EPA's landfill methane outreach program: demonstration of the new E-PLUS economic evaluation model: future trends and activities

    International Nuclear Information System (INIS)

    Kerr, T.; Paleyanda, P.; Forbes, C.D.

    1997-01-01

    Landfills contain most of the municipal solid waste (MSW) generated in the United States. As this landfilled MSW decomposes, it produces landfill gas (LFG), containing approximately 50% methane, 43-47% carbon dioxide, and 3-7% non-methane organic compounds (NMOCs). Federal regulations require affected landfills to collect and combust their LFG emissions in order to destroy NMOCs, as they are important precursors to local smog. Since 1994, the U.S. Environmental Protection Agency's Landfill Methane Outreach Program (LMOP) has been working to promote LFG-to-energy as a cost-effective way to reduce emissions of methane - a potent greenhouse gas. The LMOP's latest tool is ''E-PLUS'', Windows-compatible software that can be used to screen potential LFG-to-energy projects. E-PLUS, the Energy Project Landfill Gas Utilization Software, is capable of evaluating the economic feasibility of two energy recovery technologies based on potential LFG emissions estimates. This paper provides an overview of E-PLUS and describes its features and functions in detail. (author)

  5. The Image Gently in Dentistry campaign: promotion of responsible use of maxillofacial radiology in dentistry for children

    OpenAIRE

    White, SC; Scarfe, WC; Schulze, RKW; Lurie, AG; Douglass, JM; Farman, AG; Law, CS; Levin, MD; Sauer, RA; Valachovic, RW; Zeller, GG; Goske, MJ

    2014-01-01

    © 2014 Published by Elsevier Inc. The Image Gently in Dentistry campaign to be launched in September 2014 is a specific initiative of the Alliance for Radiation Safety in Pediatric Imaging, supported by organized dentistry and dental education as well as many dental specialty organizations. The objective of the campaign is to change practice by increasing awareness of the opportunities to improve radiation protection when imaging children in dental practices. Six practical steps are provided ...

  6. Radioprotection in dentistry: Analysis of the Dentistry Faculties of the Rio de Janeiro State not referring at personnel and installations; Radioprotecao em Odontologia: analise das faculdades de Odontologia do Estado do Rio de Janeiro no tocante a pessoal e instalacoes

    Energy Technology Data Exchange (ETDEWEB)

    Padilha F, L.G. [PEN-COPPE/UFRJ Fund. Tecnica Educacional Souza Marques. Av. Mirandela 786 c/15 26520-460, Nilopolis, RJ, (Brazil); Borges, J.C.; Raymundo Junior, R.; Koch, H.A

    1998-12-31

    The objective was to show the necessity and the importance of the training and formation of the dentist in radioprotection according to the recent proposal for technical regulations `Radiological protection directrixes in Medical and Dentistry radiodiagnostic` of the Secretaria do Vigilancia Sanitaria of Ministerio da Saude (SVSMS). This regulation establishes basic standards to radioprotection in the medical and dentistry areas, including principles, limits, obligations and basic controls for the man and environment protection, versus possible improper effects caused by the use of ionizing radiation sources. An analysis of the discipline programs of the Dentistry Schools of Rio de Janeiro state indicates that they show a little or none preoccupation by the radiological protection, which was confirmed through a survey applied toward responsible professors by department or radiology service to the dentistry Schools. This work suggests the creation or adaptation of the existing disciplines introducing radioprotection and images quality in radiodiagnostic, to improve, complement and to make uniform the formation of future dentists optimizing the solution of the identified problems. (Author)

  7. Management of pregnant patient in dentistry.

    Science.gov (United States)

    Kurien, Sophia; Kattimani, Vivekanand S; Sriram, Roopa Rani; Sriram, Sanjay Krishna; Rao V K, Prabhakara; Bhupathi, Anitha; Bodduru, Rupa Rani; N Patil, Namrata

    2013-02-01

    The purpose of this article is to update general dentists and maxillofacial surgeons in the perioperative management of the pregnant patient. Pregnancy results in physiologic changes in almost all organ systems in the body mediated mainly by hormones; which influences the treatment schedule. Understanding these normal changes is essential for providing quality care for pregnant women. The general principles that apply in this situation are discussed, followed by the relevant physiologic changes and their treatment implications, the risks of various medications to the mother and fetus, the management of concomitant medical problems in the pregnant patient, appropriate timing of oral and maxillofacial surgery during pregnancy, and management of emergencies during pregnancy. Information about the compatibility, complications, and excretion of the common drugs during pregnancy is provided. Guidelines for the management of a pregnant patient in the dental office are summarized. How to cite this article: Kurien S, Kattimani V S, Sriram R, Sriram S K, Prabhakar Rao V K, Bhupathi A, Bodduru R, Patil N N. Management of Pregnant Patient in Dentistry. J Int Oral Health 2013; 5(1):88-97.

  8. An overview of monolithic zirconia in dentistry

    Directory of Open Access Journals (Sweden)

    Özlem Malkondu

    2016-07-01

    Full Text Available Zirconia restorations have been used successfully for years in dentistry owing to their biocompatibility and good mechanical properties. Because of their lack of translucency, zirconia cores are generally veneered with porcelain, which makes restorations weaker due to failure of the adhesion between the two materials. In recent years, all-ceramic zirconia restorations have been introduced in the dental sector with the intent to solve this problem. Besides the elimination of chipping, the reduced occlusal space requirement seems to be a clear advantage of monolithic zirconia restorations. However, scientific evidence is needed to recommend this relatively new application for clinical use. This mini-review discusses the current scientific literature on monolithic zirconia restorations. The results of in vitro studies suggested that monolithic zirconia may be the best choice for posterior fixed partial dentures in the presence of high occlusal loads and minimal occlusal restoration space. The results should be supported with much more in vitro and particularly in vivo studies to obtain a final conclusion.

  9. Application of XR imaging in dentistry

    International Nuclear Information System (INIS)

    Trendafilova, N.; Gagova, P.

    2015-01-01

    Full text: For accurate and sure diagnosis in dentistry except anamnestic information (history taking) and clinical examination as an obligatory clinical examination must attend imaging investigation. For diagnosis of diseases of the teeth are used a number of imaging methods. The most widespread of them are segmental roentgenography, ortopamtomography Bitewing, as well as increasingly coming in use dental cone-beam computed tomography (3D CBCT). The aim is to introduce the types of radiographs and their benefits for prompt and proper treatment. Documentary method - a review and analysis of literature and Internet sources are made. Results and comments: Segmented radiography gives us information about the state of the tooth as a whole. Using this method gives an opportunity to visualize the crown, the neck and the root of the tooth. Ortopantomography gives a general view of the state of the maxilla and mandibula, the teeth, part of the maxillary sinuses and temporomandibular joints. Some or extra teeth, are discovered as well as dental disease conditions, bone abnormalities, cysts and others. Bitewing is used when caries is strongly suspected, though not visually, in cases of bone loss and others. The advantage of early and accurate diagnosis is to reduce future complications. Conclusion: good prevention and early detection of dental anomalies and pathologies is performed with the help of X-ray. The selection of the correct method for imaging, the proper use of X-ray machines and placing the required security means reducing the amount of radiation exposure to the patient

  10. Consent in dentistry: ethical and deontological issues.

    Science.gov (United States)

    Conti, Adelaide; Delbon, Paola; Laffranchi, Laura; Paganelli, Corrado

    2013-01-01

    In Italy, consent for health treatment, aside from being an ethical and deontological obligation, constitutes an essential requirement for any medical treatment according to articles 13 and 32 of the National Constitution and also in accordance with the Council of Europe's 'Convention on Human Rights and Biomedicine'. An essential requirement for the validity of consent is that clear, exhaustive and adequate information be provided to the patient himself: the practice of informed consent is a communicative relationship in which the patient can express doubts, perplexities and clarification requests to the dentist. Furthermore, dental treatment has specific peculiarities: the relationship between dentistry and aesthetics, the concomitant presence of pathologies requiring different treatments, the elongated care process and the establishment of a trustworthy relationship and familiarity with the patient represent important aspects in the configuration of the dentist-patient relationship and in the process of acquiring informed consent. The dentist must offer correct information on diagnosis, prognosis, the therapeutic perspective and the likely consequences of therapy, alternative therapy and refusal of therapy, as well as eventual commitments for the period after treatment. Particular consideration must be given to minors and patients of unsound mind: the dentist's approach to these patients needs to be clear and appropriate to the person's age and understanding ability, even if the decisional power for sanitary treatment may be in the hands of a third person.

  11. Digital X-ray Imaging in Dentistry

    International Nuclear Information System (INIS)

    Kim, Eun Kyung

    1999-01-01

    In dentistry, Radio Visio Graphy was introduced as a first electronic dental x-ray imaging modality in 1989. Thereafter, many types of direct digital radiographic systems have been produced in the last decade. They are based either on charge-coupled device (CCD) or on storage phosphor technology. In addition, new types of digital radiographic system using amorphous selenium, image intensifier etc. are under development. Advantages of digital radiographic system are elimination of chemical processing, reduction in radiation dose, image processing, computer storage, electronic transfer of images and so on. Image processing includes image enhancement, image reconstruction, digital subtraction, etc. Especially digital subtraction and reconstruction can be applied in many aspects of clinical practice and research. Electronic transfer of images enables filmless dental hospital and teleradiology/teledentistry system. Since the first image management and communications system (IMACS) for dentomaxillofacial radiology was reported in 1992, IMACS in dental hospital has been increasing. Meanwhile, researches about computer-assisted diagnosis, such as structural analysis of bone trabecular patterns of mandible, feature extraction, automated identification of normal landmarks on cephalometric radiograph and automated image analysis for caries or periodontitis, have been performed actively in the last decade. Further developments in digital radiographic imaging modalities, image transmission system, imaging processing and automated analysis software will change the traditional clinical dental practice in the 21st century.

  12. Non-invasive diagnostic methods in dentistry

    Science.gov (United States)

    Todea, Carmen

    2016-03-01

    The paper, will present the most important non-invasive methods for diagnostic, in different fields of dentistry. Moreover, the laser-based methods will be emphasis. In orthodontics, 3D laser scanners are increasingly being used to establish database for normative population and cross-sectional growth changes but also to asses clinical outcomes in orthognatic surgical and non-surgical treatments. In prevention the main methods for diagnostic of demineralization and caries detection in early stages are represented by laser fluorescence - Quantitative Light Florescence (QLF); DiagnoDent-system-655nm; FOTI-Fiberoptic transillumination; DIFOTI-Digital Imaging Fiberoptic transillumination; and Optical Coherence Tomography (OCT). In odontology, Laser Doppler Flowmetry (LDF) is a noninvasive real time method used for determining the tooth vitality by monitoring the pulp microcirculation in traumatized teeth, fractured teeth, and teeth undergoing different conservative treatments. In periodontology, recently study shows the ability of LDF to evaluate the health of gingival tissue in periodontal tissue diseases but also after different periodontal treatments.

  13. [Equine dentistry: Survey on Swiss horse owners].

    Science.gov (United States)

    Schiesser, E; Geyer, H; Kummer, M; Jackson, M

    2017-08-01

    The interest in equine dentistry has significantly increased in the last 15 years. On the part of the veterinarians as well as of the horse owners there is a strong attention to the topic. The aim of the questionnaire was to investigate amongst horse owners what their level of information and preferences about dental treatment are and how they are implemented. The questionnaire was translated into the three national languages and included 20 questions about level and sources of information, frequency of treatments and the horse owner's stance over sedation of the animals. With a return rate of 45% (1'466 of 3'250 sent questionnaires) significant conclusions could be drawn. Horse owners showed a strong demand for clarification regarding tooth problems, the causes, consequences and methods of treatment. More than half of the owners considered themselves not well informed. The treating person was in 66.7% a veterinarian with a special education. Horse owners indicated that information circulated most frequently by word of mouth recommendations and they explicitly wished information from professional and reliable sources. The questionnaire provided a clear result about current equine dental treatments. We suggest that they should be performed by veterinarians only with a special education.

  14. Occupational contact allergic dermatitis in dentistry

    Directory of Open Access Journals (Sweden)

    Mikov Ivan

    2011-01-01

    Full Text Available Introduction. Dental professionals may be at increased risk of developing occupational allergic diseases specially to methacrylates that can permeate protective disposable gloves. Case report. We presented a case of occupational allergic contact dermatitis in a 28-year-old dental technician. The patient had complained of itching and cracking of fingers for 6 months. The dermatitis improved over weekends. Skin erythema and scaling were present with primarily involvement of the fingertips. Patch testing with dental series gave positive vesicular reaction to methyl methacrylate. Follow-up after 6 months of allergen avoidance showed a complete regression of dermatitis. Conclusion. Methacrylates serve as bases for acrylic resins which are used in prosthetics. Methyl methacrylate as a small molecular acrylate can permeate thin protective disposable gloves. Using adequate personal protective equipment, like nitrile rubber gloves, is the most important preventive measure in this occupation. Health practitioners should recognize possible occupational hazards in dentistry and implement appropriate preventive measures to protect health of workers.

  15. HDACi: cellular effects, opportunities for restorative dentistry.

    LENUS (Irish Health Repository)

    Duncan, H F

    2011-12-01

    Acetylation of histone and non-histone proteins alters gene expression and induces a host of cellular effects. The acetylation process is homeostatically balanced by two groups of cellular enzymes, histone acetyltransferases (HATs) and histone deacetylases (HDACs). HAT activity relaxes the structure of the human chromatin, rendering it transcriptionally active, thereby increasing gene expression. In contrast, HDAC activity leads to gene silencing. The enzymatic balance can be \\'tipped\\' by histone deacetylase inhibitors (HDACi), leading to an accumulation of acetylated proteins, which subsequently modify cellular processes including stem cell differentiation, cell cycle, apoptosis, gene expression, and angiogenesis. There is a variety of natural and synthetic HDACi available, and their pleiotropic effects have contributed to diverse clinical applications, not only in cancer but also in non-cancer areas, such as chronic inflammatory disease, bone engineering, and neurodegenerative disease. Indeed, it appears that HDACi-modulated effects may differ between \\'normal\\' and transformed cells, particularly with regard to reactive oxygen species accumulation, apoptosis, proliferation, and cell cycle arrest. The potential beneficial effects of HDACi for health, resulting from their ability to regulate global gene expression by epigenetic modification of DNA-associated proteins, also offer potential for application within restorative dentistry, where they may promote dental tissue regeneration following pulpal damage.

  16. Ceramics in Restorative and Prosthetic DENTISTRY1

    Science.gov (United States)

    Kelly, J. Robert

    1997-08-01

    This review is intended to provide the ceramic engineer with information about the history and current use of ceramics in dentistry, contemporary research topics, and potential research agenda. Background material includes intra-oral design considerations, descriptions of ceramic dental components, and the origin, composition, and microstructure of current dental ceramics. Attention is paid to efforts involving net-shape processing, machining as a forming method, and the analysis of clinical failure. A rationale is presented for the further development of all-ceramic restorative systems. Current research topics receiving attention include microstructure/processing/property relationships, clinical failure mechanisms and in vitro testing, wear damage and wear testing, surface treatments, and microstructural modifications. The status of the field is critically reviewed with an eye toward future work. Significant improvements seem possible in the clinical use of ceramics based on engineering solutions derived from the study of clinically failed restorations, on the incorporation of higher levels of "biomimicry" in new systems, and on the synergistic developments in dental cements and adhesive dentin bonding.

  17. Digital X-ray Imaging in Dentistry

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Eun Kyung [Dept. of Oral and Maxillofacial Radiology, College of Dentistry, Dankook University, Yongin (Korea, Republic of)

    1999-08-15

    In dentistry, Radio Visio Graphy was introduced as a first electronic dental x-ray imaging modality in 1989. Thereafter, many types of direct digital radiographic systems have been produced in the last decade. They are based either on charge-coupled device (CCD) or on storage phosphor technology. In addition, new types of digital radiographic system using amorphous selenium, image intensifier etc. are under development. Advantages of digital radiographic system are elimination of chemical processing, reduction in radiation dose, image processing, computer storage, electronic transfer of images and so on. Image processing includes image enhancement, image reconstruction, digital subtraction, etc. Especially digital subtraction and reconstruction can be applied in many aspects of clinical practice and research. Electronic transfer of images enables filmless dental hospital and teleradiology/teledentistry system. Since the first image management and communications system (IMACS) for dentomaxillofacial radiology was reported in 1992, IMACS in dental hospital has been increasing. Meanwhile, researches about computer-assisted diagnosis, such as structural analysis of bone trabecular patterns of mandible, feature extraction, automated identification of normal landmarks on cephalometric radiograph and automated image analysis for caries or periodontitis, have been performed actively in the last decade. Further developments in digital radiographic imaging modalities, image transmission system, imaging processing and automated analysis software will change the traditional clinical dental practice in the 21st century.

  18. EYE- RELATED TRAUMA AND INFECTION IN DENTISTRY

    Directory of Open Access Journals (Sweden)

    Hasan EKMEKÇİOĞLU

    2017-10-01

    Full Text Available Despite numerous technological and medical developments achieved in recent years, a significant amount of occupational health problems still exist in modern dentistry. The risk of eye injury is mostly attributed to the use of high-speed hand pieces and ultrasonic devices. A dental clinic may be the source of eye-related infection and injury because of mechanical, chemical, microbiological and electromagnetic irritants. Accidents may cause facial injuries that involve eyes of the clinicians, patients as well as dental assistants. Eye injuries can vary from mild irritation to blindness. The use of eye protection tools, such as protective goggles and visors, reduces the risk of eye damage or complete loss of vision while working with dangerous and floating materials. Therefore, all precautions should be taken, even when performing common procedures for which the risk expectancy is relatively low. Clinicians should be aware that they are also responsible for providing adequate protection for their assistants and patients, as well as themselves.

  19. Amorphous calcium phosphate and its application in dentistry

    Directory of Open Access Journals (Sweden)

    Sun Wei-bin

    2011-07-01

    Full Text Available Abstract Amorphous Calcium Phosphate (ACP is an essential mineral phase formed in mineralized tissues and the first commercial product as artificial hydroxyapatite. ACP is unique among all forms of calcium phosphates in that it lacks long-range, periodic atomic scale order of crystalline calcium phosphates. The X-ray diffraction pattern is broad and diffuse with a maximum at 25 degree 2 theta, and no other different features compared with well-crystallized hydroxyapatite. Under electron microscopy, its morphological form is shown as small spheroidal particles in the scale of tenths nanometer. In aqueous media, ACP is easily transformed into crystalline phases such as octacalcium phosphate and apatite due to the growing of microcrystalline. It has been demonstrated that ACP has better osteoconductivity and biodegradability than tricalcium phosphate and hydroxyapatite in vivo. Moreover, it can increase alkaline phosphatase activities of mesoblasts, enhance cell proliferation and promote cell adhesion. The unique role of ACP during the formation of mineralized tissues makes it a promising candidate material for tissue repair and regeneration. ACP may also be a potential remineralizing agent in dental applications. Recently developed ACP-filled bioactive composites are believed to be effective anti-demineralizing/remineralizing agents for the preservation and repair of tooth structures. This review provides an overview of the development, structure, chemical composition, morphological characterization, phase transformation and biomedical application of ACP in dentistry.

  20. Introducing evidence-based dentistry to dental students using histology.

    Science.gov (United States)

    Lallier, Thomas E

    2014-03-01

    The expansion of evidence-based dentistry (EBD) is essential to the continued growth and development of the dental profession. Expanding EBD requires increased emphasis on critical thinking skills during dental education, as noted in the American Dental Education Association's Competencies for the New General Dentist. In order to achieve this goal, educational exercises must be introduced to increase the use of critical thinking skills early in the dental curriculum, with continued reinforcement as students progress through subsequent years. Described in this article is one approach to increasing student exposure to critical thinking during the early basic science curriculum-specifically, within the confines of a traditional histology course. A method of utilizing the medical and dental research literature to reinforce and enliven the concepts taught in histology is described, along with an approach for using peer-to-peer presentations to demonstrate the tools needed to critically evaluate research studies and their presentation in published articles. This approach, which could be applied to any basic science course, will result in a stronger foundation on which students can build their EBD and critical thinking skills.

  1. Renewable energy for America`s cities: Advanced Community Energy Systems Proposed Research, Development and Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    Gleason, T.C.J.

    1993-01-01

    The first purpose of this paper is to describe ACES technologies and their potential impact on the environment, the US energy supply system and economy. The second purpose is to recommend an R,D&D program to the US Department of Energy which has as its goal the rapid development of the most promising of the new technologies. ACES supply thermal energy to groups of buildings, communities and cities in the form of hot or chilled water for building space heating, domestic hot water or air conditioning. The energy is supplied via a network of insulated, underground pipes linking central sources of supply with buildings. ACES, by definition, employ very high energy efficiency conversion technologies such as cogeneration, heat pumps, and heat activated chillers. These systems also use renewable energy sources such as solar energy, winter cold, wind, and surface and subsurface warm and cold waters. ACES compose a new generation of community-scale building heating and air conditioning supply technologies. These new systems can effect a rapid and economical conversion of existing cities to energy supply by very efficient energy conversion systems and renewable energy systems. ACES technologies are the most promising near term means by which cities can make the transition from our present damaging dependence on fossil fuel supply systems to an economically and environmentally sustainable reliance on very high efficiency and renewable energy supply systems. When fully developed to serve an urban area, ACES will constitute a new utility system which can attain a level of energy efficiency, economy and reliance on renewable energy sources not possible with currently available energy supply systems.

  2. Renewable energy for America's cities: Advanced Community Energy Systems Proposed Research, Development and Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    Gleason, T.C.J.

    1993-01-01

    The first purpose of this paper is to describe ACES technologies and their potential impact on the environment, the US energy supply system and economy. The second purpose is to recommend an R,D D program to the US Department of Energy which has as its goal the rapid development of the most promising of the new technologies. ACES supply thermal energy to groups of buildings, communities and cities in the form of hot or chilled water for building space heating, domestic hot water or air conditioning. The energy is supplied via a network of insulated, underground pipes linking central sources of supply with buildings. ACES, by definition, employ very high energy efficiency conversion technologies such as cogeneration, heat pumps, and heat activated chillers. These systems also use renewable energy sources such as solar energy, winter cold, wind, and surface and subsurface warm and cold waters. ACES compose a new generation of community-scale building heating and air conditioning supply technologies. These new systems can effect a rapid and economical conversion of existing cities to energy supply by very efficient energy conversion systems and renewable energy systems. ACES technologies are the most promising near term means by which cities can make the transition from our present damaging dependence on fossil fuel supply systems to an economically and environmentally sustainable reliance on very high efficiency and renewable energy supply systems. When fully developed to serve an urban area, ACES will constitute a new utility system which can attain a level of energy efficiency, economy and reliance on renewable energy sources not possible with currently available energy supply systems.

  3. Agronomic and economic potential of sweet sorghum and Kenaf: Preliminary results of the California Industrial Crops Demonstration Program

    International Nuclear Information System (INIS)

    Shaffer, S.D.; Jenkins, B.M.; Brink, D.L.; Merriman, M.M.; Mouser, B.; Campbell, M.L.; Frate, C.; Schmierer, J.

    1992-01-01

    Sweet sorghum is proving to have excellent potential as a biomass energy crop for the production of fuel alcohol and/or electricity. Its advantages include high biomass and fermentables production per unit area of land, relatively low input requirements, and good suitability to a variety of California growing conditions. Average biomass yield for twelve projects involving nine growers, and eight cultivars was 7.6 bone dry tons per acre (bdt/ac) (17 t/ha) at an average cost of production of $58/bdt ($64/t), ready for harvest. With an ethanol yield of 89 gal/bdt (371 L/t), feed stock costs would be about $0.65/gal ($0.17/L). Improved crop yields at reduced costs can be expected in the future. Kenaf is a potential paper pulp and fiber feed stock which produces a long bast fiber and a short- fiber core material. About 30% of the stem material is long fiber, and the remaining 70% is short fiber. The current cost of production, given demonstration project yields of 4 bdt/ac (9t/ha) is about $222/bdt ($245/t), and available higher-value uses command prices of $300/bdt ($330/t) for long fiber for cordage and $160/bdt ($175/t) for core material as poultry litter, precluding its use directly as an energy feed stock. However, reusing the poultry litter core material for energy production may be economically feasible. This material may be obtained for about $15/bdt ($17/t), and with an ethanol yield of 34 ga/bdt (142 L/t), feed stock cost may be about $0.44/gal ($0.12/L)

  4. Evaluation of the proposed pilot groundwater pump and treat demonstration for the Paducah Gaseous Diffusion Plant. Environmental Restoration Program

    Energy Technology Data Exchange (ETDEWEB)

    Bodenstein, G.W.; Bonczek, R.R.; Early, T.O.; Hale, T.B.; Huff, D.D.; Nickelson, M.D.; Rightmire, C.T.

    1992-11-01

    This report contains the evaluation and recommendations of a Groundwater Corrective Actions Review Team. The primary goal is to evaluate the technical merit of and the need to implement a proposed groundwater pump-and-treat demonstration project for the Northwest contaminant plume at Paducah, Kentucky. A key distinction recognized by the review team is that the proposed project is intended to be a full-scale hydraulic containment of contaminants migrating from the sources of the plume, not plume remediation. The key questions incorporated into this plan are whether (1) dense, nonaqueous-phase liquids (DNAPLS) are present in the Regional Gravel Aquifer (RGA) at the source of the plume and (2) {sup 99}Tc removal must be included as part of any groundwater treatment process. The first question cannot be answered until the contaminant sources are better defined; the second question requires further risk assessment and/or a policy decision by DOE. Technical evaluation by the review team suggests that the recommended course of action be to modify the proposed work plan to include accurate identification of the sources of contaminants and vertical distribution of contaminants within the Northwest plume before a decision is made on the preferred source-control option. If DNAPLs are not present in the RGA, removal or containment of the sources is recommended. If DNAPLs are present, then hydraulic containment will be required. Finally, the review team recognizes that it is necessary to initiate a more comprehensive analysis of sitewide remediation needs to create links between action taken for the Northwest plume and action taken for other contamination sites at PGPD.

  5. Developing a mobile application to better inform patients and enable effective consultation in implant dentistry

    Directory of Open Access Journals (Sweden)

    Erokan Canbazoglu

    2016-01-01

    Full Text Available The field of dentistry lacks satisfactory tools to help visualize planned procedures and their potential results to patients. Dentists struggle to provide an effective image in their patient's mind of the end results of the planned treatment only through verbal explanations. Thus, verbal explanations alone often cannot adequately help the patients make a treatment decision. Inadequate attempts are frequently made by dentists to sketch the procedure for the patient in an effort to depict the treatment. These attempts however require an artistic ability not all dentists have. Real case photographs are sometimes of help in explaining and illustrating treatments. However, particularly in implant cases, real case photographs are often ineffective and inadequate. The purpose of this study is to develop a mobile application with an effective user interface design to support the dentist–patient interaction by providing the patient with illustrative descriptions of the procedures and the end result. Sketching, paper prototyping, and wire framing were carried out with the actual user's participation. Hard and soft dental tissues were modeled using three dimensional (3D modeling programs and real cases. The application enhances the presentation to the patients of potential implants and implant supported prosthetic treatments with rich 3D illustrative content. The application was evaluated in terms of perceived ease of use and perceived usefulness through an online survey. The application helps improve the information sharing behavior of dentists to enhance the patients' right to make informed decisions. The paper clearly demonstrates the relevance of interactive communication technologies for dentist–patient communication.

  6. A survey of retracted articles in dentistry.

    Science.gov (United States)

    Nogueira, Túlio Eduardo; Gonçalves, Andréia Souza; Leles, Cláudio Rodrigues; Batista, Aline Carvalho; Costa, Luciane Rezende

    2017-07-06

    Publication retraction is a mechanism to preserve the scientific literature against publications that contain seriously flawed or erroneous data, redundant publication, plagiarism, unethical research, and other features that compromise the integrity of science. An increase in the occurrence of retractions in recent years has been reported. Nevertheless, there is scarce information on this topic concerning publications in dentistry and related specialties. Thus, this study aimed to investigate retracted papers published in dental journals. Data collection included an exploratory search in PubMed and a specific search in SCImago Journal Rank indexed journals, complemented by the cases reported on the Retraction Watch website and in PubMed. All 167 dental journals included in SCImago were searched for identification of retracted articles up to March 2016. The selected retracted articles and their corresponding retraction notices were recorded and assessed for classification according to the reason for retraction and other additional information. Forty of the 167 journals scrutinised at SCImago (23.9%) had at least one retracted article, and four additional journals were identified from the Retraction Watch website. A total of 72 retracted found were retracted for the reasons: redundant publication (20.8%), plagiarism (18.1%), misconduct (13.8%), overlap (13.6%) and honest error (9.7%). Higher number of retractions were reported in those journals with cites/doc <2.0-n = 49 (74.2%). The types of studies were mainly laboratory studies (34.7%), case reports (22.2%) and review articles (13.9%). The approach to ethical problems in papers published in dental scientific journals is still incipient; retractions were mostly due to the authors' malpractice and were more frequently related to journals with less impact.

  7. Soft Tissue Esthetics in Implant Dentistry

    Directory of Open Access Journals (Sweden)

    Rakesh V. Somanathan

    2007-01-01

    Full Text Available Dental implants have been considered to be a successful treatment modality. Recently, achieving a good osseointegration is not the ultimate goal for the restorative dentist. Successful implant treatment demands the best gingival esthetic success along with stability and function of the implant. This study was performed to obtain answers to some controversial points pertaining to esthetics and function of implants in maxilla. Immediate flapless implantation into the extraction sockets in maxillary anterior zone is an emerging treatment option in dentistry- the esthetic success of which was in debate for long. The proposed study compared the esthetic success of immediate flapless implants (ILA, to immediate implants with the need for flap (ILB and, delayed implants (DSL in single tooth restorations, in the anterior region of the maxilla. The other aim of the study was to find out if any relation exists between the interproximal crestal bone height and papilla height. Analysis was done irrespective of treatment procedure in the same study group using periodontal sounding and radiographs to find out the relation. From the study involving 106 participants, including 21 ILA, 22 ILB and 63 DSL cases, we received highest papillary index score of 2.6 average from group ILA, followed by ILB and DSL, after 3 months of prosthetic loading. From the periodontal sounding and radiographic study it was evident that, when the distance between the base of the contact point of crowns and height of interproximal bone was less than 5, the papilla was present 100 % of the time, but when the distance increased to 6 and more than 7 mm, the papilla was present only 46.5 and 24 percentage of the time respectively.

  8. Atraumatic restorative treatment and minimal intervention dentistry.

    Science.gov (United States)

    Frencken, J E

    2017-08-11

    Too many people worldwide suffer from the consequences of untreated dentine carious lesions. This finding reflects the inability of the currently used traditional mode of treatments to manage such lesions. A change is needed. Dental training institutions should depart from the traditional 'drill and fill' treatments and embrace the holistic oral healthcare approach that is minimal intervention dentistry (MID) and includes within it minimally invasive operative skills. Dental caries is, after all, a preventable disease. The atraumatic restorative treatment (ART) concept is an example of MID. ART consists of a preventive (ART sealant) and a restorative (ART restoration) component. ART sealants using high-viscosity glass-ionomer (HVGIC) have a very high dentine carious lesion preventive effect. The survival rate of these sealants is not significantly different from that of sealants produced with resin. The survival rate of ART/HVGIC restorations matches those of amalgam and resin composite in single- and multiple-surface cavities in primary teeth and in single-surface cavities in permanent teeth. The principles of carious tissue removal within a cavity recommended by the International Caries Consensus Collaboration are in line with those of treating a cavity using ART. Owing to its good performance and the low levels of discomfort/pain and dental anxiety associated with it, ART and/or other evidence-based atraumatic care procedures should be the first treatment for a primary dentine carious lesion. Only if the use of ART is not indicated should other more invasive and less-atraumatic care procedures be used in both primary and permanent dentitions.

  9. Predictors of Burnout Syndrome in Dentistry Students

    Directory of Open Access Journals (Sweden)

    Fernanda Salloume Sampaio Bonafé

    2014-11-01

    Full Text Available AimTo estimate the contribution of social support and demographic factors in the development of burnout syndrome in dentistry students.MethodA total of 169 Brazilian students participated via internet. For identification of the syndrome, we used the Maslach Burnout Inventory (MBI-SS. Social support was assessed by the Satisfaction with Social Support Scale (ESSS. The validity and reliability of the instruments were estimated. To check the effect of variables on burnout syndrome, linear regression using structural equation modelling (SEM was performed to estimate causal trajectories (β.ResultsThe participants’ mean average age was 21.6 (SD = 3.3 years, 64.5% were female and 59.2% were enrolled in private schools. An appropriate adjustment of the instruments’ factor models to sample was observed (MBI-SS: χ²/df = 2.173, CFI = .943; GFI = .888; RMSEA = .084; ESSS: χ²/df = 2.378, CFI = .904; GFI = .888; RMSEA = .091. The reliability of the scales was adequate (MBI-SS: α = .799-.903; ESSS: α = .653-.799. The model explained 33% of the variation of burnout with a significant contribution of social support (ESSS (β = -.136, p = .042, gender (β = -.186, p = .005, housing (β = .124, p = .050, student performance in the course (β = -.293, p ≤ .001 and the thought of quitting the course (β = .333, p ≤ .001.ConclusionSocial support and demographic variables may play an important role in the burnout syndrome and therefore should be considered when implementing preventive actions and/or interventions (self-help or guided in college students.

  10. Finally in Italy the School of Specialisation in Paediatric Dentistry!

    Science.gov (United States)

    Marzo, G

    2017-06-01

    After over two decades of discussions, promises and indecisions, the year 2016 marked the birth of the School of Specialisation in Paediatric Dentistry, which is now a reality. The importance of dental post-graduate specialisation schools has been debated since the Degree Course in Dentistry was established. Previously, in Italy only two dental branches - Oral Surgery and Orthodontics - had obtained the recognition that a School of Specialisation entails. Today, with specific training and the newly- established hyper-specialisation in Paediatric Dentistry, the future of the profession is brighter than ever. This will allow dental professionals to provide the best cure to our young patients but it especially marks and recognises the importance of prevention in general. Having established a Specialty School in Paediatric Dentistry is also important to keep the pace with the other European countries where this postgraduate course has been already offered for many years. In my opinion, training professionals with a solid specialisation based both on cultural insights and hands-on clinical activities translates into the possibility of making true prevention. The ultimate goal of paediatric dentists, as well as paediatricians, is certainly to treat young patients but also and above all to accompany them toward an adulthood possibly free of pathologies. With an eye to a future where Paediatric Dentistry will be at the core of dental and orthodontic prevention, I wish great success to all the many specialisation schools established within the Italian Universities.

  11. Methodological Quality of Consensus Guidelines in Implant Dentistry.

    Science.gov (United States)

    Faggion, Clovis Mariano; Apaza, Karol; Ariza-Fritas, Tania; Málaga, Lilian; Giannakopoulos, Nikolaos Nikitas; Alarcón, Marco Antonio

    2017-01-01

    Consensus guidelines are useful to improve clinical decision making. Therefore, the methodological evaluation of these guidelines is of paramount importance. Low quality information may guide to inadequate or harmful clinical decisions. To evaluate the methodological quality of consensus guidelines published in implant dentistry using a validated methodological instrument. The six implant dentistry journals with impact factors were scrutinised for consensus guidelines related to implant dentistry. Two assessors independently selected consensus guidelines, and four assessors independently evaluated their methodological quality using the Appraisal of Guidelines for Research & Evaluation (AGREE) II instrument. Disagreements in the selection and evaluation of guidelines were resolved by consensus. First, the consensus guidelines were analysed alone. Then, systematic reviews conducted to support the guidelines were included in the analysis. Non-parametric statistics for dependent variables (Wilcoxon signed rank test) was used to compare both groups. Of 258 initially retrieved articles, 27 consensus guidelines were selected. Median scores in four domains (applicability, rigour of development, stakeholder involvement, and editorial independence), expressed as percentages of maximum possible domain scores, were below 50% (median, 26%, 30.70%, 41.70%, and 41.70%, respectively). The consensus guidelines and consensus guidelines + systematic reviews data sets could be compared for 19 guidelines, and the results showed significant improvements in all domain scores (p dentistry journals is needed. The findings of the present study may help researchers to better develop consensus guidelines in implant dentistry, which will improve the quality and trust of information needed to make proper clinical decisions.

  12. Use of antidepressants in dentistry: A systematic review.

    Science.gov (United States)

    Lino, P A; Martins, C C; Miranda, Gfpc; de Souza E Silva, M E; de Abreu, Mhng

    2017-08-24

    Previous research has suggested that antidepressants can be used in oral health care. The aim of this systematic review was to search for scientific evidence of the efficacy of the use of antidepressants in dentistry. The clinical question was as follows (PICO question): dentistry patients (Patients); antidepressants (Intervention); no use or placebo or other drug (Comparison); and efficacy in oral health problems (Outcome). An electronic search was conducted in seven databases, as well as a manual search without restriction regarding language and date of publication. Two independent reviewers selected studies based on eligibility criteria, extracted data and assessed methodological quality based on the PEDro scale. The PROSPERO record is number CRD42016037442. A total of 15 randomized controlled trials were associated with the use of antidepressants to control chronic or acute pain in dentistry, among other conditions such as bruxism and burning mouth syndrome. The most commonly used drug in clinical trials was amitriptyline (more than 50% of studies). Antidepressants may be effective in dentistry for acute and chronic pain, but there is a large amount of methodological heterogeneity among the evaluated studies. In summary, there is rationality for the indication of this class of medicine in dentistry in specific clinical situations. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd. All rights reserved.

  13. Integral Ramjet Booster Demonstration Program

    Science.gov (United States)

    1975-02-01

    vibration loads before motor firing at -65, +70, and +1650F, (2) The chambers are fabricated from roll and welded ( TIG ) L-605 sheet that is cold...Typical Integral Booster Internal Configuration Keyhole Grain Pressure and Thrust Versus Time (+700F, Sea Level) Keyhole Grain Pressure and...Thrust Versus Time (+1650F, Sea Level) Keyhole Grain Pressure and Thrust Versus Time (-65^, Sea Level) Radial-Slot Grain Design Radial-Slot Grain

  14. Evidence-based dentistry: fundamentals for the dentist.

    Science.gov (United States)

    Bauer, Janet; Chiappelli, Francesco; Spackman, Sue; Prolo, Paolo; Stevenson, Richard

    2006-06-01

    This article explains the fundamentals of evidence-based dentistry for the dentist. Evidence-based dentistry is a discipline whose primary participant is the translational researcher. Recent developments have emphasized the importance of this discipline (clinical and translational research) for improving health care. The process of evidence-based dentistry is the reciprocation of new and existing evidence between dentists and quantitative and qualitative researchers, facilitated by the translational researcher. The product of this reciprocation is the clinical practice guideline, or best evidence, that provides the patient options in choosing treatments or services. These options are quantified and qualified by decision, utility, and cost data. Using shared decision-making, the dentist and patient arrive at a mutual understanding of which option best meets an acceptable and preferred treatment course that is cost effective. This option becomes the clinical decision.

  15. Black triangle dilemma and its management in esthetic dentistry.

    Science.gov (United States)

    Singh, Vijendra P; Uppoor, Ashita S; Nayak, Dilip G; Shah, Dipen

    2013-05-01

    In recent years, clinician and dentist's esthetic demand in dentistry have increased rapidly, driven by an enhanced awareness of beauty and esthetics. The ultimate goal in modern restorative dentistry is to achieve "white" and "pink" esthetics in esthetically important zones. "White esthetics" is the natural dentition or the restoration of dental hard tissues with suitable materials. "Pink esthetics" refers to the surrounding soft-tissues, which includes the interdental papilla and gingiva that can enhance or diminish the esthetic result. Reconstruction of the lost interdental papilla is one of the most challenging and least predictable problems. Restoration and maintenance of these tissues with adequate surgical and prosthetic techniques are a real challenge in modern esthetic dentistry. Treatment of marginal tissue recession, excessive gingival display, deficient ridges, ridge collapse, and esthetic defects around teeth and implants are some of the esthetic problems associated with the interdental papilla that have to be corrected in todays scenario which has been discussed in this review.

  16. The Modern Value of Early Writings in Medicine and Dentistry.

    Science.gov (United States)

    Peck, Sheldon

    2016-01-01

    This article illustrates three examples supporting the modern value of early writings in dentistry and medicine. First, by studying cases described in works published long before the era of genetic science, we are able to develop new hypotheses about familial conditions and their genetic roots. Tooth transposition is presented as an example. Second, old writings may lead us to valuable historical insights and perspectives in medicine that can be revealed only in retrospective analysis. An example of this kind of historical analysis uncovers why dentistry became unnaturally separated from mainstream medicine in the 19th century. Third, early writings become keys to unlocking forgotten knowledge that enriches our understanding of historically significant people and events. The discovery of Norman Kingsley's long forgotten pyrographic paintings after Rembrandt portraits is used as an example. Libraries, the traditional custodians of these valued old texts, must continue to be supported, and not undermined by the paperless digital revolution. Copyright American Academy of the History of Dentistry.

  17. Nanotechnology in Dentistry: Clinical Applications, Benefits, and Hazards.

    Science.gov (United States)

    Shashirekha, Govind; Jena, Amit; Mohapatra, Satyajit

    2017-05-01

    Nanotechnology is emerging as an interdisciplinary field that is undergoing rapid development and has brought about enormous changes in medicine and dentistry. Nanomaterial-based design is able to mimic some of the mechanical and structural properties of native tissue and can promote biointegration. Nanotechnology has various applications in dentistry, including dentition renaturalization, therapy for dentin hypersensitivity, complete orthodontic realignment in a single visit, covalently bonding diamondized enamel, enhancing properties of root canal sealers, and continuous oral health maintenance using mechanical dentifrobots. A range of synthetic nanoparticles such as hydroxyapatite, bioglass, titanium, zirconia, and silver nanoparticles are proposed for dental restoration. This review focuses on the developments in the field of nanomaterials in dentistry in the form of tissue regeneration materials, implantable devices, nanocomposites, endodontic sealers etc. and issues of patient safety.

  18. Transcutaneous electric nerve stimulation (TENS) in dentistry- A review.

    Science.gov (United States)

    Kasat, Vikrant; Gupta, Aditi; Ladda, Ruchi; Kathariya, Mitesh; Saluja, Harish; Farooqui, Anjum-Ara

    2014-12-01

    Transcutaneous electric nerve stimulation (TENS) is a non-pharmacological method which is widely used by medical and paramedical professionals for the management of acute and chronic pain in a variety of conditions. Similarly, it can be utilized for the management of pain during various dental procedures as well as pain due to various conditions affecting maxillofacial region. This review aims to provide an insight into clinical research evidence available for the analgesic and non analgesic uses of TENS in pediatric as well as adult patients related to the field of dentistry. Also, an attempt is made to briefly discuss history of therapeutic electricity, mechanism of action of TENS, components of TENs equipment, types, techniques of administration, advantages and contradictions of TENS. With this we hope to raise awareness among dental fraternity regarding its dental applications thereby increasing its use in dentistry. Key words:Dentistry, pain, TENS.

  19. Techniques to administer oral, inhalational, and IV sedation in dentistry

    Directory of Open Access Journals (Sweden)

    Diana Krystyna Harbuz

    2016-02-01

    Full Text Available Background Sedation in dentistry is a controversial topic given the variety of opinions regarding its safe practice. Aims This article evaluates the various techniques used to administer sedation in dentistry and specific methods practiced to form a recommendation for clinicians. Methods An extensive literature search was performed using PubMed, Medline, Google Scholar, Google, and local library resources. Results Most of the literature revealed a consensus that light sedation on low-risk American Society of Anesthesiologists (ASA groups, that is ASA I, and possibly II, is the safest method for sedation in a dental outpatient setting. Conclusion Formal training is essential to achieve the safe practice of sedation in dentistry or medicine. The appropriate setting for sedation should be determined as there is an increased risk outside the hospital setting. Patients should be adequately assessed and medication titrated appropriately, based on individual requirements.

  20. Green dentistry: the art and science of sustainable practice.

    Science.gov (United States)

    Mulimani, P

    2017-06-23

    Dentistry is highly energy and resource intensive with significant environmental impact. Factors inherent in the profession such as enormous electricity demands of electronic dental equipment, voluminous water requirements, environmental effects of biomaterials (before, during and after clinical use), the use of radiation and the generation of hazardous waste involving mercury, lead etc have contributed towards this. With rising temperatures across the world due to global warming, efforts are being made worldwide to mitigate the effects of environmental damage by resorting to sustainability concepts and green solutions in a myriad of ways. In such a scenario, a professional obligation and social responsibility of dentists makes it imperative to transform the practice of dentistry from a hazardous to a sustainable one, by adopting environmental-friendly measures or 'green dentistry'. The NHS in the UK has been proactive in implementing sustainability in healthcare by setting targets, developing guidance papers, initiating steering groups to develop measures and implementing actions through its Sustainable Development Unit (SDU). Such sustainable frameworks, specific to dentistry, are not yet available and even the scientific literature is devoid of studies in this field although anecdotal narratives abound. Hence this paper attempts to present a comprehensive evaluation of the existing healthcare sustainability principles, for their parallel application in the field of dentistry and lays out a blueprint for integrating the two main underlying principles of sustainability - resource use efficiency and eliminating or minimising pollution - in the day-to-day practice. The article also highlights the importance of social values, community care, engaging stakeholders, economic benefits, developing policy and providing leadership in converting the concept of green dentistry into a practised reality.