WorldWideScience

Sample records for dental laboratory technology

  1. A Study of Mathematics Needed for Dental Laboratory Technology, Medical Laboratory Technology, and Respiratory Therapy.

    Science.gov (United States)

    Roberts, Keith J.

    A study was conducted to determine what mathematics skills were needed for Dental Laboratory Technology, Medical Laboratory Technology, and Respiratory Therapy. Data obtained from studies, course outlines, textbooks, and reports were used to construct a 79-item mathematics skill questionnaire. This questionnaire was administered to employers,…

  2. Dental laboratory technology education in China: current situation and challenges.

    Science.gov (United States)

    Zheng, Liwei; Yue, Li; Zhou, Min; Yu, Haiyang

    2013-03-01

    Modern dentistry and dental education in China were first introduced from abroad by Dr. Lindsay in 1907. However, advancements in the field of dental laboratory technology did not occur to the same degree in specialties such as prosthodontics and orthodontics. Since the 1990s, orders from abroad demanding dental appliances surged as the image of China as the "world's factory" strengthened. The assembly line model, in which technicians work like simple procedure workers, was rapidly applied to denture production, while the traditional education system and apprenticeship systems demonstrated little progress in these years. The lack of advancement in dental laboratory technology education caused insufficient development in China's dental technology industry. In order to alter the situation, a four-year dental laboratory technology undergraduate educational program was established in 2005 by West China School of Stomatology, Sichuan University (WCSS, SCU). This program was based on SCU's undergraduate education and WCSS's junior college education systems. The program introduced scientific methods in relevant subjects into laboratory technicians' training and made many improvements in the availability of trained faculty, textbooks, laboratory facilities, and curriculum.

  3. Use of High-Definition Audiovisual Technology in a Gross Anatomy Laboratory: Effect on Dental Students' Learning Outcomes and Satisfaction.

    Science.gov (United States)

    Ahmad, Maha; Sleiman, Naama H; Thomas, Maureen; Kashani, Nahid; Ditmyer, Marcia M

    2016-02-01

    Laboratory cadaver dissection is essential for three-dimensional understanding of anatomical structures and variability, but there are many challenges to teaching gross anatomy in medical and dental schools, including a lack of available space and qualified anatomy faculty. The aim of this study was to determine the efficacy of high-definition audiovisual educational technology in the gross anatomy laboratory in improving dental students' learning outcomes and satisfaction. Exam scores were compared for two classes of first-year students at one U.S. dental school: 2012-13 (no audiovisual technology) and 2013-14 (audiovisual technology), and section exams were used to compare differences between semesters. Additionally, an online survey was used to assess the satisfaction of students who used the technology. All 284 first-year students in the two years (2012-13 N=144; 2013-14 N=140) participated in the exams. Of the 140 students in the 2013-14 class, 63 completed the survey (45% response rate). The results showed that those students who used the technology had higher scores on the laboratory exams than those who did not use it, and students in the winter semester scored higher (90.17±0.56) than in the fall semester (82.10±0.68). More than 87% of those surveyed strongly agreed or agreed that the audiovisual devices represented anatomical structures clearly in the gross anatomy laboratory. These students reported an improved experience in learning and understanding anatomical structures, found the laboratory to be less overwhelming, and said they were better able to follow dissection instructions and understand details of anatomical structures with the new technology. Based on these results, the study concluded that the ability to provide the students a clear view of anatomical structures and high-quality imaging had improved their learning experience.

  4. Distributed Energy Technology Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Distributed Energy Technologies Laboratory (DETL) is an extension of the power electronics testing capabilities of the Photovoltaic System Evaluation Laboratory...

  5. Acoustic Technology Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory contains an electro-magnetic worldwide data collection and field measurement capability in the area of acoustic technology. Outfitted by NASA Langley...

  6. Nigerian Dental Technology Students and Human ...

    African Journals Online (AJOL)

    study of dental technology students of Federal School of Dental Therapy and Technology. Enugu .... to care for HIV-infected patients among this group of dental professionals in ... and upper class) and the expressed willingness to care for.

  7. The introduction of digital dental technology into BDS curricula.

    Science.gov (United States)

    Chatham, C; Spencer, M H; Wood, D J; Johnson, A

    2014-12-05

    The aim of this study was to determine the degree to which digital dental technologies have been introduced into the curricula of UK dental schools. A survey was carried out of all the UK dental schools that teach undergraduate dental students. The survey contained six questions and was designed to determine if digital dental technology techniques or systems were being taught in the curricula, what these techniques were, and whether the school dental laboratories supported these techniques. Sixteen schools were surveyed and 11 replied: a response rate of 69%. Forty-five percent of the schools that replied did not teach digital dental technology in their curriculum. Of the 55% of schools who did teach digital dental technology, 50% gave lectures or demonstrations while the other 50% allowed practical involvement by the student. Two thirds of these stated that not all the students participated in practical usage. Seventy-three percent of the schools that replied had dental laboratories using some, but not all the digital dental technology techniques listed. Eighty percent of the schools that were not teaching digital dental technology said it was because it was not included in the curriculum, and 20% stated it was due to a lack of technical expertise or support.

  8. SATISFACTION OF MARKETING COMMUNICATIONS IN THE ACTIVITIES OF THE DENTAL LABORATORY

    Directory of Open Access Journals (Sweden)

    Minko M. Milev

    2017-06-01

    Full Text Available Purpose: Analysis of the attitude of dental physicians, dental technicians, patients and students of dental technology, about the marketing communication in the work of dental technical laboratories. Material and Methods: The main study was conducted on the territory of Northeastern Bulgaria, using direct anonymous paper questionnaires in the period between April and July 2015. A total of 700 respondents were interviewed, distributed into four groups (dental physicians, dental technicians, students of dental technology and patients of dental laboratories. Results and Discussion: The study was designed to investigate the satisfaction with marketing communications among all participants in dental laboratory activities. Satisfaction of dental physicians with aspects of marketing communication of dental laboratories was 47,39% (n=127, and a negative answer was given from 22,76% (n = 61 of respondents. The majority of dental technicians (75,91%, n=104 were satisfied with aspects of marketing communication with dental clinics/dental physicians, while 29,85% (n = 80 weren’t satisfied. The study of the satisfaction with the communication among the students showed that 60,42% (n=116 of them were satisfied and lack of satisfaction with communication was reported by 1,56% (n=3 of the respondents. Among the studied patients, 81,55% (n=84 felt satisfied with the communication carried out at the dental clinics, and 8,74% (n = 9 among patients were not satisfied. Conclusion: The integrated communications may successfully achieve the goals of a given communication campaign by a well-coordinated utilisation of the different kinds of IMC instruments: advertising, public relations (PR, personal sales, sales promotions and others. The desired synergy is attained when all the IMC instruments are synchronised and mutually enhanced.

  9. Dental student’s satisfaction towards orthodontic laboratory work from RSGM Dental Laboratory

    Directory of Open Access Journals (Sweden)

    Sianiwati Goenharto

    2015-12-01

    Full Text Available Background: Customer satisfaction plays an important role in the success and continuity of a business. Dental Laboratory of RSGM Faculty of Dental Medicine Universitas Airlangga provides services for Faculty of Dental Medicine, Universitas Airlangga students enrolled in a dental profession program. One of services offered is making of removable orthodontic appliances. Until now there has been no research on customer satisfaction after the appliances made in the laboratory. Purpose: This study was conducted to determine whether Universitas Airlangga dental students as customers were satisfied with the work of the RSGM Dental laboratory, particularly in orthodontics. Method: An analytic observational study was carried out on 48 Faculty of Dental Medicine Universitas Airlangga students who were enrolled in a dental profession program and made removable orthodontic appliances in RSGM Dental Laboratory. The students were asked to fill out a questionnaire about satisfaction regarding the timeliness, the suitability of results, the services provided, the quality of both active and passive components, the ease of insertion and activation. Data were analyzed descriptively. The relationship between satisfaction towards the quality of clasp, spring, bow and satisfaction towards the quality of acrylic plate to the ease of insertion were analyzed with Fischer exact test. The relationship between satisfaction towards the quality of clasp, spring, bow and satisfaction towards the quality of acrylic plate to the ease of activation were analyzed by chi square. Result: Respondents who were satisfied with the timeliness of work were 54.17%, the suitability of the results of the query were 79.17%, the services provided were 95.83%, the results of clasp, bow and spring were 72.92%, the results of acrylic plate were 77.08%, the ease of insertion were 54.17%, and the ease of activation were 89.58%. The results of the statistical analysis showed a significant

  10. Design of Web Content Management System for Dental Laboratories

    OpenAIRE

    Reham Alabduljabbar; Samir El-Masri

    2013-01-01

    Web Content Management system is a management tool for creating a dynamic website. It ensures logical structure of data organization and ease of content accessing and presenting. Dental laboratories need Web Content Management system (WCMS) to control their business. Maintaining a long-term relationship between dental laboratories and their customers (dental clinics and dentists) urges an active communication process between the two sides. The main contribution of this paper is to design a si...

  11. Dental Implants: Dual Stabilization Technology

    OpenAIRE

    Saini, Rajiv

    2015-01-01

    More recent epidemiological data seem to show an increasing trend of tooth loss due to periodontal reasons rather than caries; the presence of initial attachment loss, bone height and the habit of smoking significantly increase the risk of tooth mortality. A dental implant is a titanium screw which is placed into bone to replace missing teeth. The implant mimics the root of a tooth in function. Dental Implants have changed the face of dentistry over the last three decades. Success of dental i...

  12. Design of Web Content Management System for Dental Laboratories

    Directory of Open Access Journals (Sweden)

    Reham Alabduljabbar

    2013-01-01

    Full Text Available Web Content Management system is a management tool for creating a dynamic website. It ensures logical structure of data organization and ease of content accessing and presenting. Dental laboratories need Web Content Management system (WCMS to control their business. Maintaining a long-term relationship between dental laboratories and their customers (dental clinics and dentists urges an active communication process between the two sides. The main contribution of this paper is to design a simple Web Content Management System for Dental Laboratories. The system adopts three layers of technical architecture. The paper will also discuss why there is a need to develop a standalone WCMS for Dental Laboratories whilst other open source WCMSs can be utilized such as Joomla, Drupal and WordPress.

  13. Lidocaine Metabolism and Toxicity: A Laboratory Experiment for Dental Students.

    Science.gov (United States)

    Kusek, J. C.

    1980-01-01

    A laboratory exercise for dental students is presented using a toxic dose of lidocaine in place of an anesthetic dose of pentobarbital. The use of lidocaine demonstrates its toxic and lethal actions and increases the relevance of the experience for dental students. (Author/MLW)

  14. Application of biophysical technologies in dental research

    Science.gov (United States)

    Higham, Susan M.; Pender, Neil; de Josselin de Jong, Elbert; Smith, Philip W.

    2009-05-01

    There is a wealth of evidence to indicate that if dental caries can be recognized at an early stage, it is possible to halt its progression or even reverse it. This has led to an increased interest in the development of diagnostic techniques capable of visualizing caries at an early stage in addition to providing clinicians with an aid to diagnosis. Several techniques are available for research and clinical applications for detecting early demineralization. This manuscript has reviewed some of the techniques currently available to determine their advantages, whether they have any limitations and their applicability to dental research and clinical dentistry. Not one method is the perfect choice in all situations, but what is clear is that the development and application of biophysical technologies have allowed major advances to be made in dental research as well as in clinical dentistry. With continued developments these technologies will play an important role in the future management of dental disease.

  15. Levels of crystalline silica dust in dental laboratorium of Dental Health Technology Study Program of Vocational Faculty, Universitas Airlangga

    Directory of Open Access Journals (Sweden)

    Eny Inayati

    2015-12-01

    Full Text Available Background: Silicosis is an occupational lung disease caused by inhaling particles of crystalline silica in a long time. The disease then results in inflammation and defects in lung tissue. Prosthesis construction is usually conducted in dental laboratory using a lot of materials containing crystalline silica, such as gypsum, ceramics, planting material, sandblast and others. Purpose: This research aims to determine levels of crystalline silica dust in the dental laboratory of Dental Health Technology Diploma Study Program, Vocational Faculty, Universitas Airlangga. Method: Three measurement points was determined, namely point 1, point 2 and point 3 in each dental laboratory space (I and II. Suctioning dust was performed at those points using Low Volume Dust Sampler (LVDS. Samples taken were divided into two groups, namely X and Y. Taking dust samples were carried out for 30 minutes. Elements of crystalline silica contained in the dust were quantitatively measured using XR Defractometry tool, while size and morphology of silica were measured using SEM EDX tool. Data obtained were statistically analyzed by paired t test. Result: The results showed significant differences in the levels of the total dust measured and crystalline silica in the form of quartz and cristobalite among those two dental laboratory spaces. Conclusion: It can be concluded that the levels of the total dust and silica quartz dust in the dental laboratory spaces I and II were greater than the Threshold Limit Value (TLV determined.

  16. Transforming Dental Technology Education: Skills, Knowledge, and Curricular Reform.

    Science.gov (United States)

    Bobich, Anita M; Mitchell, Betty L

    2017-09-01

    Dental technology is one of the core allied dental health professions supporting the practice of dentistry. By definition, it is the art, science, and technologies that enable the design and fabrication of dental prostheses and/or corrective devices to restore natural teeth and supporting structures to fulfill a patient's physiological and esthetic needs. Dental technology educational programs are faced with serious challenges, including rapid changes in technology, inadequate funding for educational programs, and the need to develop curricula that reflect current industry needs. Better communications between dental technologists and practitioners are needed to gain greater recognition of the contribution that technologists make to patient health. Amid these challenges, the technology workforce is dedicated to providing patients with the best possible restorative dental prostheses. This article was written as part of the project "Advancing Dental Education in the 21(st) Century."

  17. Dental Biofilm and Laboratory Microbial Culture Models for Cariology Research

    Directory of Open Access Journals (Sweden)

    Ollie Yiru Yu

    2017-06-01

    Full Text Available Dental caries form through a complex interaction over time among dental plaque, fermentable carbohydrate, and host factors (including teeth and saliva. As a key factor, dental plaque or biofilm substantially influence the characteristic of the carious lesions. Laboratory microbial culture models are often used because they provide a controllable and constant environment for cariology research. Moreover, they do not have ethical problems associated with clinical studies. The design of the microbial culture model varies from simple to sophisticated according to the purpose of the investigation. Each model is a compromise between the reality of the oral cavity and the simplification of the model. Researchers, however, can still obtain meaningful and useful results from the models they select. Laboratory microbial culture models can be categorized into a closed system and an open system. Models in the closed system have a finite supply of nutrients, and are also simple and cost-effective. Models in the open system enabled the supply of a fresh culture medium and the removal of metabolites and spent culture liquid simultaneously. They provide better regulation of the biofilm growth rate than the models in the closed system. This review paper gives an overview of the dental plaque biofilm and laboratory microbial culture models used for cariology research.

  18. Dental Training Films.

    Science.gov (United States)

    Veterans Administration Medical Center, Washington, DC.

    This dental training films catalog is organized into two sections. Section I is a category listing of the films by number and title, indexed according to generalized headings; categories are as follow: anatomy, articulator systems, complete dentures, dental assisting, dental laboratory technology, dental materials, dental office emergencies,…

  19. Adaptation and fixation in entrepreneurial approaches of a dental laboratory

    Directory of Open Access Journals (Sweden)

    Cornelia M. Ferreira

    2014-02-01

    Full Text Available Orientation: This study described the adaptation and fixation processes implemented by a small business entrepreneur in order to cope with changing market circumstances.Research purpose: The study described how the dental laboratory adapted its entrepreneurial approaches over time in response to critical changes that occurred and how aspects in the managerial approach became fixated and proved to be essential to success.Motivation for the study: The study provided insight into how the dental laboratory transformed into a stable and prosperous laboratory by the integration of strategic, economic, cultural and social capital through a process of business decision making.Research design, approach and method: A cohort survey research design, based upon the compilation of longitudinal data over three selected time periods, was employed. The design of the measuring instruments and the interpretation of research results were derived from an adapted entrepreneurial-in-network theoretical framework. A triangulation data compilation approach was followed.Main findings: The results revealed that cultural capital in the dental laboratory became fixated on three value principles, whilst the other critical capitals prescribed exist in sufficient volumes and improve to adapt to changing circumstances in the dental market.Practical/managerial implications: Fixated cultural values acted as a ‘parent’-actor in order to guide the righteousness of behaviour, whereas adaptation required sufficient critical capitals and the proper integration thereof.Contribution/value-added: By adopting the entrepreneurship-in-network approach, the researchers incorporated the dynamic and interactive processes of entrepreneurship. Future studies may employ the same design and use multi-varied analyses to show how a business adapt or fixate its approaches in response to crises or changes in the business environment.

  20. Potential of information technology in dental education.

    Science.gov (United States)

    Mattheos, N; Stefanovic, N; Apse, P; Attstrom, R; Buchanan, J; Brown, P; Camilleri, A; Care, R; Fabrikant, E; Gundersen, S; Honkala, S; Johnson, L; Jonas, I; Kavadella, A; Moreira, J; Peroz, I; Perryer, D G; Seemann, R; Tansy, M; Thomas, H F; Tsuruta, J; Uribe, S; Urtane, I; Walsh, T F; Zimmerman, J; Walmsley, A D

    2008-02-01

    The use of information technology (IT) in dentistry is far ranging. In order to produce a working document for the dental educator, this paper focuses on those methods where IT can assist in the education and competence development of dental students and dentists (e.g. e-learning, distance learning, simulations and computer-based assessment). Web pages and other information-gathering devices have become an essential part of our daily life, as they provide extensive information on all aspects of our society. This is mirrored in dental education where there are many different tools available, as listed in this report. IT offers added value to traditional teaching methods and examples are provided. In spite of the continuing debate on the learning effectiveness of e-learning applications, students request such approaches as an adjunct to the traditional delivery of learning materials. Faculty require support to enable them to effectively use the technology to the benefit of their students. This support should be provided by the institution and it is suggested that, where possible, institutions should appoint an e-learning champion with good interpersonal skills to support and encourage faculty change. From a global prospective, all students and faculty should have access to e-learning tools. This report encourages open access to e-learning material, platforms and programs. The quality of such learning materials must have well defined learning objectives and involve peer review to ensure content validity, accuracy, currency, the use of evidence-based data and the use of best practices. To ensure that the developers' intellectual rights are protected, the original content needs to be secure from unauthorized changes. Strategies and recommendations on how to improve the quality of e-learning are outlined. In the area of assessment, traditional examination schemes can be enriched by IT, whilst the Internet can provide many innovative approaches. Future trends in IT will

  1. New technologies to improve laboratory testing

    Science.gov (United States)

    Burtis, C. A.

    Several core technologies that are having, or will have, an impact on the clinical laboratory are discussed. These include instrument-related technologies such as computer technology, chemometrics, robotics, sensors, and biological technologies such as cell fusion and recombinant DNA.

  2. Pneumoconiosis and respiratory problems in dental laboratory technicians: Analysis of 893 dental technicians

    Directory of Open Access Journals (Sweden)

    Dilek Ergün

    2014-10-01

    Full Text Available Objectives: To explore the rate of pneumoconiosis in dental technicians (DTP and to evaluate the risk factors. Material and Methods: Data of 893 dental technicians, who were admitted to our hospital in the period January 2007–May 2012, from 170 dental laboratories were retrospectively examined. Demographic data, respiratory symptoms, smoking status, work duration, working fields, exposure to sandblasting, physical examination findings, chest radiographs, pulmonary function tests and high-resolution computed tomography results were evaluated. Results: Dental technicians’ pneumoconiosis rate was 10.1% among 893 cases. The disease was more common among males and in those exposed to sandblasting who had 77-fold higher risk of DTP. The highest profusion subcategory was 3/+ (according to the International Labour Organization (ILO 2011 standards and the large opacity rate was 13.3%. Conclusions: To the best of our knowledge, it was the largest DTP case series (N = 893/90 in the literature in English. Health screenings should be performed regularly for the early diagnosis of pneumoconiosis, which is an important occupational disease for dental technicians.

  3. Dental science and technology parks: Rethinking university-industry connections

    Directory of Open Access Journals (Sweden)

    Jafar Kolahi

    2015-01-01

    Full Text Available As the 21st century unfolds, the development of science-based technologies [such as nanodentistry, tissue engineering, three-dimensional (3D printers, laser dentistry, and computer-aided design/computer-aided manufacturing (CAD/CAM] should change clinical dental practice. Unfortunately, a persistent problem in dentistry is the slow acceptance of new technology by dental schools and some dentists. Most dental graduates, dental faculty, and dental researchers know little about the principles of entrepreneurship, e.g., the process of patenting and licensing, how to write a business plan, market analysis, sources of financing, and the establishment of small and medium-sized enterprises. Most dental graduates, dental faculty, and dental researchers know little about the topics mentioned above. They may know how to conduct a dental research project and publish a paper, but most have no idea of how to plan for the commercialization of research findings. University-industry research relationships are important in promoting innovation, and dental science and technology parks (STPs can play a major role in this technological revolution.

  4. Smart dental practice: capitalising on smart mobile technology.

    Science.gov (United States)

    Plangger, K; Bredican, J; Mills, A J; Armstrong, J

    2015-08-14

    To keep pace with consumer adoption of smart mobile devices, such as smartphones and tablets, and the applications ('apps') developed for these devices, dental professionals should consider how this technology could be used to simultaneously improve both patient service experiences and dental practice management. Using U-Commerce as a theoretical lens, this article discusses the potential value of smart mobile technology to the dental practice context, with a particular focus on the unique and customisable capabilities of apps. To take full advantage of this technology, a process is outlined for identifying and designing bespoke dental apps that takes into account the unique advantages of these devices. Dental practices, with increasing financial and competitive pressures, may improve the efficiency and profitability of operations and better manage patients, employees and stakeholders by integrating smart mobile technology.

  5. INFORMATION SYSTEMS TECHNOLOGY LABORATORY (ISTL)

    Data.gov (United States)

    Federal Laboratory Consortium — Background: The Naval Automated Information Laboratory (NAIL), consisting of Navy legacy and transitional systems, was established to emulate a typical command for...

  6. The gross anatomy laboratory: a novel venue for critical thinking and interdisciplinary teaching in dental education.

    Science.gov (United States)

    Rowland, Kevin C; Joy, Anita

    2015-03-01

    Reports on the status of dental education have concluded that there is a need for various types of curricular reform, making recommendations that include better integration of basic, behavioral, and clinical sciences, increased case-based teaching, emphasis on student-driven learning, and creation of lifelong learners. Dental schools faced with decreasing contact hours, increasing teaching material, and technological advancements have experimented with alternate curricular strategies. At Southern Illinois University School of Dental Medicine, curricular changes have begun with a series of integrated biomedical sciences courses. During the process of planning and implementing the integrated courses, a novel venue-the gross anatomy laboratory-was used to introduce all Year 1 students to critical thinking, self-directed learning, and the scientific method. The venture included student-driven documentation of anatomical variations encountered in the laboratory using robust scientific methods, thorough literature review, and subsequent presentation of findings in peer review settings. Students responded positively, with over 75% agreeing the experience intellectually challenged them. This article describes the process of re-envisioning the gross anatomy laboratory as an effective venue for small group-based, student-driven projects that focus on key pedagogical concepts to encourage the development of lifelong learners.

  7. [Covering dental defects with aluminum cast dowel construction and technology of their manufacture].

    Science.gov (United States)

    Khudonogov, G I

    1995-01-01

    Clinical and laboratory studies have revealed benefits of aluminum cast constructions. Its cast dowel inserts are used in the system of fixed metal-free dentures made from ceramics (dental bridges, single crowns, etc.). The high efficiency, availability of casting technology for aluminum reduces patients' treatment periods and ensures accurate attachment of dowel insets to the root canal and stump of a tooth.

  8. Arctic Energy Technology Development Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Sukumar Bandopadhyay; Charles Chamberlin; Robert Chaney; Gang Chen; Godwin Chukwu; James Clough; Steve Colt; Anthony Covescek; Robert Crosby; Abhijit Dandekar; Paul Decker; Brandon Galloway; Rajive Ganguli; Catherine Hanks; Rich Haut; Kristie Hilton; Larry Hinzman; Gwen Holdman; Kristie Holland; Robert Hunter; Ron Johnson; Thomas Johnson; Doug Kame; Mikhail Kaneveskly; Tristan Kenny; Santanu Khataniar; Abhijeet Kulkami; Peter Lehman; Mary Beth Leigh; Jenn-Tai Liang; Michael Lilly; Chuen-Sen Lin; Paul Martin; Pete McGrail; Dan Miller; Debasmita Misra; Nagendra Nagabhushana; David Ogbe; Amanda Osborne; Antoinette Owen; Sharish Patil; Rocky Reifenstuhl; Doug Reynolds; Eric Robertson; Todd Schaef; Jack Schmid; Yuri Shur; Arion Tussing; Jack Walker; Katey Walter; Shannon Watson; Daniel White; Gregory White; Mark White; Richard Wies; Tom Williams; Dennis Witmer; Craig Wollard; Tao Zhu

    2008-12-31

    The Arctic Energy Technology Development Laboratory was created by the University of Alaska Fairbanks in response to a congressionally mandated funding opportunity through the U.S. Department of Energy (DOE), specifically to encourage research partnerships between the university, the Alaskan energy industry, and the DOE. The enabling legislation permitted research in a broad variety of topics particularly of interest to Alaska, including providing more efficient and economical electrical power generation in rural villages, as well as research in coal, oil, and gas. The contract was managed as a cooperative research agreement, with active project monitoring and management from the DOE. In the eight years of this partnership, approximately 30 projects were funded and completed. These projects, which were selected using an industry panel of Alaskan energy industry engineers and managers, cover a wide range of topics, such as diesel engine efficiency, fuel cells, coal combustion, methane gas hydrates, heavy oil recovery, and water issues associated with ice road construction in the oil fields of the North Slope. Each project was managed as a separate DOE contract, and the final technical report for each completed project is included with this final report. The intent of this process was to address the energy research needs of Alaska and to develop research capability at the university. As such, the intent from the beginning of this process was to encourage development of partnerships and skills that would permit a transition to direct competitive funding opportunities managed from funding sources. This project has succeeded at both the individual project level and at the institutional development level, as many of the researchers at the university are currently submitting proposals to funding agencies, with some success.

  9. Survey on the use of CAD-CAM technology by UK and Irish dental technicians.

    Science.gov (United States)

    Blackwell, E; Nesbit, M; Petridis, H

    2017-05-12

    Statement of the problem Digital workflows (CAD/CAM) have been introduced in dentistry during recent years. No published information exists on dental technicians' use and reporting of this technology.Purpose The aim of this cross sectional survey was to identify the extent digital technology has infiltrated the workplace and to investigate the factors affecting the use of CAD-CAM technology by dental laboratory technicians within Ireland and the UK.Materials and methods A web-based questionnaire was composed (Opinio, Object Planet Inc. Oslo, Norway) and distributed to UK and Irish dental technicians. Answers to all questions were anonymous and grouped such that general information was gathered initially, followed by branching of the survey into two sections depending on whether or not the respondent worked with CAD-CAM technology. Results were compiled and statistical analysis (Fisher's Exact test, SPSS, IBM, Armonk, New York, USA) was performed in order to investigate any correlation between various demographic variables and the answers provided.Results The survey was distributed to 760 UK technicians and 77 Irish technicians. The total number of completed surveys was 105, which yielded a total response rate of 14%. Most technicians reported using some form of CAD/CAM aspect in the workflow, and this was more significant for technicians working in large laboratories. Most training received was company-led. Large laboratories were also significantly correlated with less outsourcing of CAD/CAM work and a change in dental material use leading to the increase of zirconia and the decrease of noble alloys. Dental technicians did not report any significant change in working relationships and staffing as a result of CAD/CAM incorporation. High initial investment cost was the most common reason quoted from non-users, along with the lack of such technology in their working environment.

  10. Anatomical sciences: A foundation for a solid learning experience in dental technology and dental prosthetics.

    Science.gov (United States)

    Bakr, Mahmoud M; Thompson, C Mark; Massadiq, Magdalena

    2016-09-01

    Basic science courses are extremely important as a foundation for scaffolding knowledge and then applying it in future courses, clinical situations as well as in a professional career. Anatomical sciences, which include tooth morphology, oral histology, oral embryology, and head and neck anatomy form a core part of the preclinical courses in dental technology programs. In this article, the importance and relevance of anatomical sciences to dental personnel with no direct contact with patients (dental technicians) and limited discipline related contact with patients (dental prosthetists) is highlighted. Some light is shed on the role of anatomical sciences in the pedagogical framework and its significance in the educational process and interprofessional learning of dental technicians and prosthetists using oral biology as an example in the dental curriculum. To conclude, anatomical sciences allow dental technicians and prosthetists to a gain a better insight of how tissues function, leading to a better understanding of diagnosis, comprehensive treatment planning and referrals if needed. Patient communication and satisfaction also increases as a result of this deep understanding of oral tissues. Anatomical sciences bridge the gap between basic science, preclinical, and clinical courses, which leads to a holistic approach in patient management. Finally, treatment outcomes are positively affected due to the appreciation of the macro and micro structure of oral tissues. Anat Sci Educ. © 2016 American Association of Anatomists.

  11. A Laboratory Course in Technological Chemistry.

    Science.gov (United States)

    Wiseman, P.

    1986-01-01

    Describes a laboratory course taught at the University of Manchester Institute of Science and Technology (United Kingdom) which focuses on the preparation, properties, and applications of end-use products of the chemical industry. Outlines laboratory experiments on dyes, fibers, herbicides, performance testing, antioxidants, and surface active…

  12. Contamination level of alginate impressions arriving at a dental laboratory.

    Science.gov (United States)

    Sofou, A; Larsen, T; Fiehn, N-E; Owall, B

    2002-09-01

    The contamination level of alginate impressions delivered to a large dental laboratory in Sweden was determined. One hundred and seven consecutive alginate impressions were included during 7 days. Samples were taken and transferred into sterile physiological saline and analysed microbiologically for colony-forming units (cfu) as well as nonhemolytic, alpha-hemolytic, and beta-hemolytic colonies. After sampling, the clinics were contacted and asked to fill in simple questionnaires about their routines of disinfecting impressions. The questionnaire study revealed that about half of the clinics had some kind of disinfection routine, while the others rinsed in running water only. Seventy-two percent of the impressions yielded growth of bacteria, with a median number of 1.3x10(2) cfu. Thirteen per cent of the samples yielded >10(3) cfu, with a maximum number of 3.4x10(4) cfu. The majority of isolates were non- and alpha-hemolytic bacteria. Growth was recorded in 61.3% of disinfected impressions, and the numbers of bacteria in disinfected and nondisinfected impressions were similar. These findings raise the question of whether impressions need to be disinfected or if proper handling and hygienic procedures are sufficient to block the possible route of infection.

  13. Educational technology for millennial dental hygiene students: a survey of U.S. dental hygiene programs.

    Science.gov (United States)

    Beebe, Catherine R R; Gurenlian, JoAnn R; Rogo, Ellen J

    2014-06-01

    A growing body of literature suggests that today's learners have changed and education must change as well since Millennial generation students expect technology to be used in their coursework. This study sought to determine what educational technology is being used in U.S. dental hygiene programs, what student and faculty perceptions are of the effectiveness of technology, and what barriers exist to implementing educational technology. A stratified random sample of 120 entry-level dental hygiene programs nationwide were invited to participate in a survey. Fourteen programs participated, yielding a pool of 415 potential individual participants; out of those, eighty-four student and thirty-eight faculty respondents were included in the analysis, a total of 122. Results were analyzed using descriptive statistics and a Mann-Whitney U test (p<0.05). Faculty and student respondents agreed on the effectiveness of educational technology in all areas except clickers and wikis. The faculty members tended to rate the effectiveness of educational technology higher than did the students. The greatest perceived barrier to implementing technology was technical difficulties. This study suggests that support services should be available to faculty and students to ensure successful implementation of technology. Dental hygiene educators have adopted many types of educational technology, but more data are needed to determine best practices.

  14. Second-generation dental laser technology

    Science.gov (United States)

    Moretti, Michael

    1993-07-01

    The first generation of dental lasers proved limited to soft tissue applications. Due to the thermal properties of these lasers, drilling of enamel and dentin is harmful to the underlying nerve tissue. As a solution to this problem, more sophisticated solidstate lasers are under commercial development for hard tissue applications. The first of these second generation lasers to emerge is the erbium:YAG now marketed in Europe by KaVo. This system relies on a cumbersome articulated arm delivery device. Other manufacturers have overcome this delivery problem with the introduction of flexible delivery methods. Another hard tissue laser that has been introduced is the short-pulsed Nd:YAG. This laser uses shaped pulses to drill teeth without thermal damage. An overview of these and other second generation dental lasers is presented.

  15. Laboratory automation: trajectory, technology, and tactics.

    Science.gov (United States)

    Markin, R S; Whalen, S A

    2000-05-01

    Laboratory automation is in its infancy, following a path parallel to the development of laboratory information systems in the late 1970s and early 1980s. Changes on the horizon in healthcare and clinical laboratory service that affect the delivery of laboratory results include the increasing age of the population in North America, the implementation of the Balanced Budget Act (1997), and the creation of disease management companies. Major technology drivers include outcomes optimization and phenotypically targeted drugs. Constant cost pressures in the clinical laboratory have forced diagnostic manufacturers into less than optimal profitability states. Laboratory automation can be a tool for the improvement of laboratory services and may decrease costs. The key to improvement of laboratory services is implementation of the correct automation technology. The design of this technology should be driven by required functionality. Automation design issues should be centered on the understanding of the laboratory and its relationship to healthcare delivery and the business and operational processes in the clinical laboratory. Automation design philosophy has evolved from a hardware-based approach to a software-based approach. Process control software to support repeat testing, reflex testing, and transportation management, and overall computer-integrated manufacturing approaches to laboratory automation implementation are rapidly expanding areas. It is clear that hardware and software are functionally interdependent and that the interface between the laboratory automation system and the laboratory information system is a key component. The cost-effectiveness of automation solutions suggested by vendors, however, has been difficult to evaluate because the number of automation installations are few and the precision with which operational data have been collected to determine payback is suboptimal. The trend in automation has moved from total laboratory automation to a

  16. Mississippi Curriculum Framework for Dental Hygiene Technology (Program CIP: 51.0602--Dental Hygienist). Postsecondary Education.

    Science.gov (United States)

    Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

    This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the dental hygiene technology program. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies. Section II…

  17. Bluetooth technology for prevention of dental caries.

    Science.gov (United States)

    Kolahi, Jafar; Fazilati, Mohamad

    2009-12-01

    Caries is caused when the pH at the tooth surface drops below 5.5. A miniaturized and autonomous pH monitoring nodes can be attached to the tooth surface, like a tooth jewel. This intelligent sensor includes three components: (a) digital micro pH meter, (b) power supply, (c) wireless communicating device. The micro pH meter facilitates long term tooth surface pH monitoring and providing real time feedback to the patients and dental experts. Power supply of this system will be microfabricated biocatalytic fuel cell (enzymatic micro-battery) using organic compounds (e.g. formate or glucose) as the fuel to generate electricity. When micro pH meter detects the pH lower than 5.5, wireless Bluetooth device sends a caution (e.g. "you are at risk of dental caries") to external monitoring equipment such as mobile phone or a hands-free heads. After reception of the caution, subjects should use routine brushing and flossing procedure or use a medicated chewing gum (e.g. chlorhexidine containing chewing gum) or rinse with a mouthwash.

  18. MUSICAL-COMPUTER TECHNOLOGY: THE LABORATORY

    OpenAIRE

    Gorbunova Irina B.

    2012-01-01

    The article deals with musically-computer technology in the educational system on example of the Educational and Methodical Laboratory Music & Computer Technologies at the Herzen State Pedagogical University of Russia, St. Petersburg. Interdisciplinary field of professional activities relates to the creation and application of specialized music software and hardware tools and the knowledges in music and informatics. A realization of the concept of musical-computer education in preparing music...

  19. Information Technology Practices Amongst Dental Undergraduate Students at a Private Dental Institution in India

    Directory of Open Access Journals (Sweden)

    S. Kumar

    2009-09-01

    Full Text Available Objective: In dental and medical education, information and communication technology (ICT has been playing an important role and its use is rapidly increasing. In developing countries, however, information technology is still only available to a minority of health professionals. The present study aimed to assess the level of computer use among dental undergraduate students pursuing their career at a private dental institution in India.Materials and Methods: The study population comprised dental undergraduate students from first to fourth year pursuing their career in a private dental institution of India. Informationtechnology practices were assessed using a questionnaire that consisted of 14 questions.Results: In total, 247 students with an overall response rate of 66% participated in the study. Only 58.3% of the study population mentioned that they had access to computers.Students from preclinical years reported to be competent in IT skills more frequently than the clinical year students (chi square test, P=0.007. Compared to women, men used computers more regularly both for academic activities (P=0.082 and personal use (P=0.006.Similarly, students of clinical years used computers more than preclinical students for both purposes (academic activities, P=0.045; personal use, P=0.124.Conclusion: The present study revealed that computer literacy of Indian dental undergraduate students was comparable with students of other countries whereas accessibility of IT sources was poor. Expansion of computer-assisted learning which requires careful strategic planning, resource sharing, staff incentives, active promotion of multidisciplinary working, and effective quality control should be implemented.

  20. THE IDAHO NATIONAL LABORATORY BERYLLIUM TECHNOLOGY UPDATE

    Energy Technology Data Exchange (ETDEWEB)

    Glen R. Longhurst

    2007-12-01

    A Beryllium Technology Update meeting was held at the Idaho National Laboratory on July 18, 2007. Participants came from the U.S., Japan, and Russia. There were two main objectives of this meeting. One was a discussion of current technologies for beryllium in fission reactors, particularly the Advanced Test Reactor and the Japan Materials Test Reactor, and prospects for material availability in the coming years. The second objective of the meeting was a discussion of a project of the International Science and Technology Center regarding treatment of irradiated beryllium for disposal. This paper highlights discussions held during that meeting and major conclusions reached

  1. Microbial Contamination of Pumice Powder and Slurry in Dental Laboratories of Hamadan

    Directory of Open Access Journals (Sweden)

    Vafaee

    2013-12-01

    Full Text Available Background Using contaminated pumice in polishing process of dental prostheses may result in cross-contamination of dentists, laboratory technicians, and patients. Objectives This study aimed to determine the presence and level of microbial contaminants in pumice powder and slurry used in dental laboratories of Hamadan city. Materials and Methods Forty specimens, including 20 pumice powders and 20 pumice slurries were collected from 10 randomly selected dental laboratories and inoculated onto selective and non-selective media in order to count the total colony-forming units (CFU. Isolated fungi and bacteria were identified using Gram-stain and deferential diagnostic tests. Results Results of this study showed 85% contamination rate for pumice powders and 100% for pumice slurries. Frequencies of Gram-positive and Gram-negative bacteria isolated from the powders were 68% and 32% respectively. For the slurries the frequencies were 61% Gram-positive and 39% Gram-negative. Organisms detected in pumice powders composed of Staphylococcus epidermidis, E. coli, Acinetobacter, B. cereus, Enterobacter, Candida, and diphtheroids. Organisms detected in pumice slurries included Staphylococcus epidermidis, E. coli, Citrobacter, S. aureus, Enterobacter, B. cereus, B. proteus, Candida, and diphtheroids. Conclusions According to this study, pumice powder and slurry used in dental laboratories of Hamadan are contaminated. Therefore, the Laboratory staff should be aware of the hazards posed by the presence of pathogens in dental laboratories.

  2. Use of information and communication technology among dental students and registrars at the faculty of dental sciences, University of Lagos.

    Science.gov (United States)

    Butali, A; Adeyemo, W L; Akinshipo, A O; Fashina, A; Savage, K O

    2011-01-01

    The aim of this study was to investigate the use of information technology amongst dental students, dental nursing students and resident doctors in training at the faculty of dental Surgery University of Lagos. A structured questionnaire was distributed to 58 clinical dental students in 4 th and 5 th years of training in the 2010/2011 academic year, 36 dental nursing students and 63 resident doctors undergoing specialist training. All participants have access to the computers, 2.5% within the University and 31% at home and internet cafes and about 50% have the basic skills required. A significant difference was observed between the resident doctors and clinical dental students (P = 0.003), between resident doctors and dental nursing students (P = 0.0001) when the use of computer for study was compared. Over 95% of participants have access to internet and about 50% of them use the internet for their studies. A significant difference (P = 0.005) was observed between clinical dental students and dental nursing students that use the internet and word processing. The resident doctors used the computers for multimedia and MedLine search tools more than clinical dental students (P = 0.004) and dental nursing students (0.0006). The findings of the study show that dental students and resident doctors in training have the requisite knowledge to operate the computer for use in their study and personal activities.

  3. MUSICAL-COMPUTER TECHNOLOGY: THE LABORATORY

    Directory of Open Access Journals (Sweden)

    Gorbunova Irina B.

    2012-12-01

    Full Text Available The article deals with musically-computer technology in the educational system on example of the Educational and Methodical Laboratory Music & Computer Technologies at the Herzen State Pedagogical University of Russia, St. Petersburg. Interdisciplinary field of professional activities relates to the creation and application of specialized music software and hardware tools and the knowledges in music and informatics. A realization of the concept of musical-computer education in preparing music teachers is through basic educational programs of vocational training, supplementary education, professional development of teachers and methodical support via Internet. In addition, the laboratory Music & Computer Technologies engaged in scientific activity: it is, above all, specialized researches in the field of pedagogy and international conferences.

  4. Perceived barriers in accessing dental care among patients attending dental institute using decision-making trial and evaluation laboratory method

    Directory of Open Access Journals (Sweden)

    Ravneet Malhi

    2015-01-01

    Full Text Available Introduction: Utilization of dental service is a concept of expressing the extent of interaction between the service provider and the people for whom it is indented. However, one of the major issues in social welfare is the equitable provision of these services to the population. Aim: To determine the perceived barriers affecting access to the dental services in the dental institute. Materials and Methods: A cross-sectional survey was conducted in the dental institute during the month of February in the year 2014 using decision-making trial and evaluation laboratory (DEMATEL method. The study sample included the 364 subjects. The required data were collected using a specially designed and pretested questionnaire. The data were analyzed using SPSS 18.0 (SPSS Inc., Chicago, IL, USA and MATLAB 7.6.0. The mean, standard deviations were used to describe the data, and inferential statistics included one-way ANOVA and DEMATEL. Results: The five determinants of cost, inconvenience, fear, organization, and patient-dentist relationship were determined as barriers to access dental services. Based on subjects′ responses to the questions, the cost (54.75% agreed or strongly agreed was identified as the most important factor affecting the access to dental health care followed by dentist-patient relationship (48.57%, inconvenience (36.55%, fear (23.70%, and organization (14.02%. The difference was found to be statistically significant (P = 0.0001. When the hierarchy of the affecting and affected factors was calculated, based on the factor analysis by using DEMATEL method, the cost (R−J = 0.16 and organization (R−J = 1.15, were certain affecting determinant which influenced the access to dental services and inconvenience. Conclusion: The major barriers to oral health care utilization among our patients were cost, fear, and organization. Policymakers, administrators, and insurance organizations have a major role. Hence, the policies should be fair and

  5. Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Williams, C.V.; Burford, T.D. [Sandia National Labs., Albuquerque, NM (United States). Environmental Restoration Technologies; Allen, C.A. [Tech Reps, Inc., Albuquerque, NM (United States)

    1996-08-01

    Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy`s (DOE`s) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID`s technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID.

  6. Three-dimensional printing physiology laboratory technology.

    Science.gov (United States)

    Sulkin, Matthew S; Widder, Emily; Shao, Connie; Holzem, Katherine M; Gloschat, Christopher; Gutbrod, Sarah R; Efimov, Igor R

    2013-12-01

    Since its inception in 19th-century Germany, the physiology laboratory has been a complex and expensive research enterprise involving experts in various fields of science and engineering. Physiology research has been critically dependent on cutting-edge technological support of mechanical, electrical, optical, and more recently computer engineers. Evolution of modern experimental equipment is constrained by lack of direct communication between the physiological community and industry producing this equipment. Fortunately, recent advances in open source technologies, including three-dimensional printing, open source hardware and software, present an exciting opportunity to bring the design and development of research instrumentation to the end user, i.e., life scientists. Here we provide an overview on how to develop customized, cost-effective experimental equipment for physiology laboratories.

  7. Intraoral laser welding: ultrastructural and mechanical analysis to compare laboratory laser and dental laser.

    Science.gov (United States)

    Fornaini, Carlo; Passaretti, Francesca; Villa, Elena; Rocca, Jean-Paul; Merigo, Elisabetta; Vescovi, Paolo; Meleti, Marco; Manfredi, Maddalena; Nammour, Samir

    2011-07-01

    The Nd:YAG laser has been used since 1970 in dental laboratories to weld metals on dental prostheses. Recently in several clinical cases, we have suggested that the Nd:YAG laser device commonly utilized in the dental office could be used to repair broken fixed, removable and orthodontic prostheses and to weld metals directly in the mouth. The aim of this work was to evaluate, using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and dynamic mechanical analysis (DMA), the quality of the weld and its mechanical strength, comparing a device normally used in dental laboratory and a device normally used in the dental office for oral surgery, the same as that described for intraoral welding. Metal plates of a Co-Cr-Mo dental alloy and steel orthodontic wires were subjected to four welding procedures: welding without filler metal using the laboratory laser, welding with filler metal using the laboratory laser, welding without filler metal using the office laser, and welding with filler metal using the office laser. The welded materials were then analysed by SEM, EDS and DMA. SEM analysis did not show significant differences between the samples although the plates welded using the office laser without filler metal showed a greater number of fissures than the other samples. EDS microanalysis of the welding zone showed a homogeneous composition of the metals. Mechanical tests showed similar elastic behaviours of the samples, with minimal differences between the samples welded with the two devices. No wire broke even under the maximum force applied by the analyser. This study seems to demonstrate that the welds produced using the office Nd:YAG laser device and the laboratory Nd:YAG laser device, as analysed by SEM, EDS and DMA, showed minimal and nonsignificant differences, although these findings need to be confirmed using a greater number of samples.

  8. Assessment of noise levels in clinical and laboratory areas of dental teaching institution, Ahmedabad

    Directory of Open Access Journals (Sweden)

    Sujal M Parkar

    2014-01-01

    Full Text Available Aim: To measure and assess the noise levels produced by different dental equipments. Materials and Methods: Measurement of the noise level was performed in preclinics, clinics, and dental laboratory of different departments of Ahmedabad Dental College and Hospital. The noise levels were determined using a Mini sound meter (CEM USA, which was placed at the dentist′s and laboratory technician′s ear level and at a distance of 1 m from a main noise source. The level of noise was measured in decibel (dB while the instruments were at maximum running speed. Results: In dental laboratory, the nosiest dental equipment was gypsum lathe trimmer with the noise level ranging from 87.36 to 98.3 dB. In preclinical area, the sound produced by low-speed air-rotor ranges from 66.68 to 69.28 dB. In clinical areas, the highest noise produced was by high-speed air-rotor (73.36 to 81.8 dB. The noise created by suction pump when in contact with mucosa was in range from 73.1 to 80.32 dB. The noise levels generated during cutting were significantly higher (P < 0.05 than those of noncutting, which was proved in the course of the measurements. Conclusion: At the end of the study it can be concluded that the sound levels are below that causes damage to the human ear (85 dB. However, dental technicians and other personnel working all day in noisy laboratories could be at risk of Noise-Induced Hearing Loss if they did not choose not to wear ear protection.

  9. A comparison of 2 laboratory methods to test dental unit waterline water quality.

    Science.gov (United States)

    Porteous, Nuala; Sun, Yuyu; Dang, Shichien; Schoolfield, John

    2013-11-01

    The performance of 2 American Public Health Association standard laboratory methods, the R2A spread plate and the SimPlate(TM) for heterotrophic plate count, for quantifying heterotrophic microorganisms in dental waterline samples was evaluated. Microbial counts were underestimated on SimPlate(TM) compared with R2A, and the results indicated a poor correlation between the 2 methods.

  10. A comparison of two laboratory methods to test dental unit waterline water quality

    Science.gov (United States)

    Porteous, Nuala; Sun, Yuyu; Dang, Shichien; Schoolfield, John

    2013-01-01

    The performance of two APHA standard laboratory methods, the R2A spread plate and the SimPlate™ for heterotrophic plate count (HPC), for quantifying heterotrophic microorganisms in dental waterline samples was evaluated. Microbial counts were underestimated on SimPlate™ compared with R2A and the results indicated a poor correlation between the two methods. PMID:24054735

  11. Replacement of missing teeth in a southern region of Vietnam--a descriptive dental laboratory study.

    NARCIS (Netherlands)

    Chau, T.N.; Witter, D.J.; Kreulen, C.M.; Creugers, N.H.J.; Tu, H.H.

    2009-01-01

    AIM: To explore whether tooth replacement in a southern region of Vietnam is in line with the primary health care approach, aiming at health services for all people at affordable costs. METHODS: Tooth replacement was investigated by means of prostheses as delivered by four dental laboratories of whi

  12. Dental Laboratory Career Ladder AFS 982X0.

    Science.gov (United States)

    1982-09-01

    SUPPLIES 11 A23 REVIEW UNIT EMERGENCY OR DISASTER PLANS 11 K305 PERFORM SOLDERING PROCEDURES ON ORTHODONTIC APPLIANCES 11 F129 BOIL OUT WAX FROM MOLDS 11...to RPD fabrication, one related to ceramic prostheses fabrication, and one related to orthodontic duties). 3. DAFSC and Skill-Level Task Differences...laboratory personnel were different due to specialization. Area laboratory personnel fabricated Removable Partial Dentures (RPDs) and orthodontic appliances

  13. Information and communication technology among undergraduate dental students in Finland.

    Science.gov (United States)

    Virtanen, Jorma I; Nieminen, Pentti

    2002-11-01

    Use of information and communication technology (ICT) is rapidly increasing in medical and dental education. The aim of the present study was to determine the knowledge, skills and opinions of dental undergraduate students regarding ICT and to analyze possible shifts in the acquisition of these resources. For these purposes a survey of all undergraduate dental students at the University of Oulu, Finland, was conducted during the spring term 2000. All the students in the 5 years of study (n = 140) were asked to answer a questionnaire presented during a lecture or demonstration. An overall response rate of 95% was achieved. The frequencies and percentage distributions of the items were analyzed separately for each year (1-5). All the students in the faculty are provided with personal e-mail addresses at the beginning of their studies and special emphasis has been laid on the utilization of their ICT knowledge and skills. An overwhelming majority of the students, more than 95%, judged themselves to have good or satisfactory skills in word processing, but only a slight majority considered that they could manage some advanced operating system functions. Use of ICT services was high, as about 60% of the students used e-mail and one-third WWW services daily. Literature retrieval was widely employed, so that almost 80% of the students had used literature databases (including Ovid Medline and collections of electronic full-text articles), which were introduced and provided by the Medical Library when the students were in their second year. More than 50% had received educational material in electronic form often or sometimes, and almost 80% had communicated by e-mail with a faculty teacher. A clear trend (P skills, which presents a challenge for dental education in the future.

  14. 75 FR 16511 - Pentron Clinical Technologies, a Wholly-Owned Subsidiary of Kerr Dental/Sybron Dental...

    Science.gov (United States)

    2010-04-01

    ... such as dental prosthetics, dental composites, dental impressions, dental adhesives, and other dental... prosthetics, dental composites, dental impressions, dental adhesives, and other dental materials to Mexicali... Dental/Sybron Dental Specialities, Formally Known as Customedix Corporation, Including On-Site Leased...

  15. The Validity of Subjects in Korean Dental Technicians' Licensing Examination

    Directory of Open Access Journals (Sweden)

    Woong-chul Kim

    2005-06-01

    Full Text Available This study prepared a basic framework for the development and improvement of Korean Dental Technicians' Licensing Examination, based on actual test questions. A peer review was conducted to ensure relevance to current practices in dental technology. For the statistical analysis, 1000 dental laboratory technicians were selected; specialists in dental laboratory technology (laboratory owners, educators, etc. were involved in creating valid and reliable questions. Results indicated that examination subjects should be divided into three categories: basic dental laboratory theory, dental laboratory specialties, and a practical examination. To ensure relevance to current practice, there should be less emphasis on basic dental laboratory theory, including health-related laws, and more emphasis on dental laboratory specialties. Introduction to dental anatomy should be separated from oral anatomy and tooth morphology; and fixed prosthodontics should be separated from crown and bridge technology and dental ceramics technology. Removable orthodontic appliance technology should be renamed 'orthodontic laboratory technology'. There should be less questions related to health related law, oral anatomy, dental hygiene, dental materials science and inlay, while the distribution ratio of questions related to tooth morphology should be maintained. There should be a decrease in the distribution ratio of questions related to crown and bridge technology, dental ceramics technology, complete dentures and removable partial dentures technology, and orthodontic laboratory technology. In the practical examination, the current multiple choice test should be replaced with tooth carving using wax or plaster. In dental laboratory specialties, subjects related to contemporary dental laboratory technology should be included in the test items.

  16. Push technology at Argonne National Laboratory.

    Energy Technology Data Exchange (ETDEWEB)

    Noel, R. E.; Woell, Y. N.

    1999-04-06

    Selective dissemination of information (SDI) services, also referred to as current awareness searches, are usually provided by periodically running computer programs (personal profiles) against a cumulative database or databases. This concept of pushing relevant content to users has long been integral to librarianship. Librarians traditionally turned to information companies to implement these searches for their users in business, academia, and the science community. This paper describes how a push technology was implemented on a large scale for scientists and engineers at Argonne National Laboratory, explains some of the challenges to designers/maintainers, and identifies the positive effects that SDI seems to be having on users. Argonne purchases the Institute for Scientific Information (ISI) Current Contents data (all subject areas except Humanities), and scientists no longer need to turn to outside companies for reliable SDI service. Argonne's database and its customized services are known as ACCESS (Argonne-University of Chicago Current Contents Electronic Search Service).

  17. Exploring the consistency, transparency and portability of dental technology education: benchmarking across Norway, Ireland and Australia.

    Science.gov (United States)

    Myhrer, T; Evans, J L; Haugen, H K; Gorman, C; Kavanagh, Y; Cameron, A B

    2016-08-01

    Dental technology programmes of study must prepare students to practice in a broad range of contemporary workplaces. Currently, there is limited evidence to benchmark dental technology education - locally, nationally or internationally. This research aims to improve consistency, transparency and portability of dental technology qualifications across three countries. Data were accessed from open-source curriculum documents and five calibrated assessment items. Three institutions collaborated with Oslo and Akershus University College, Norway; Trinity College Dublin, Ireland; and Griffith University, Australia. From these, 29-44 students completed 174 assessments. The curricula reflect the community needs of each country and display common themes that underpin professional dental technology practice. Assessment results differed between institutions but no more than a normal distribution. Face-to-face assessment moderation was critical to achieve consistency. This collaborative research has led to the development of a set of guidelines for other dental technology education providers interested in developing or aligning courses internationally to enhance the portability of qualifications.

  18. Digital modeling technology for full dental crown tooth preparation.

    Science.gov (United States)

    Dai, Ning; Zhong, Yicheng; Liu, Hao; Yuan, Fusong; Sun, Yuchun

    2016-04-01

    A dental defect is one of the most common oral diseases, and it often requires a full crown restoration. In this clinical operation, the dentist must manually prepare the affected tooth for the full crown so that it has a convergence angle between 4° and 10°, no undercuts, and uniform and even shoulder widths and depths using a high speed diamond bur in the patient׳s mouth within one hour, which is a difficult task that requires visual-manual operation. The quality of the tooth preparation has an important effect on the success rate of the subsequent prosthodontic treatment. This study involved research into digital modeling technology for full dental crown tooth preparation. First, the margin line of the tooth preparation was designed using a semi-automatic interactive process. Second, the inserting direction was automatically computed. Then, the characteristic parameters and the constraints on the tooth preparation were defined for the model. Next, the shoulder and axial surface of the tooth preparation were formed using parametric modeling. Finally, the implicit surface of a radial basis function was used to construct the tooth preparation׳s occlusal surface. The experimental results verified that the method of digital modeling for full crown preparation proposed in this study can quickly and accurately implement personalized designs of various parameters, such as the shoulder width and the convergence angle; it provides a digital design tool for full crown preparation.

  19. Teaching with technology: learning outcomes for a combined dental and dental hygiene online hybrid oral histology course.

    Science.gov (United States)

    Gadbury-Amyot, Cynthia C; Singh, Amul H; Overman, Pamela R

    2013-06-01

    Among the challenges leaders in dental and allied dental education have faced in recent years is a shortage of well-qualified faculty members, especially in some specialty areas of dentistry. One proposed solution has been the use of technology. At the University of Missouri-Kansas City School of Dentistry, the departure of a faculty member who taught the highly specialized content in oral histology and embryology provided the opportunity to implement distance delivery of that course. The course is taught once a year to a combined group of dental and dental hygiene students. Previous to spring semester of 2009, the course was taught using traditional face-to-face, in-class lectures and multiple-choice examinations. During the spring semesters of 2009, 2010, and 2011, the course was taught using synchronous and asynchronous distance delivery technology. Outcomes for these courses (including course grades and performance on the National Board Dental Examination Part I) were compared to those from the 2006, 2007, and 2008 courses. Students participating in the online hybrid course were also given an author-designed survey, and the perceptions of the faculty member who made the transition from teaching the course in a traditional face-to-face format to teaching in an online hybrid format were solicited. Overall, student and faculty perceptions and student outcomes and course reviews have been positive. The results of this study can provide guidance to those seeking to use technology as one method of curricular delivery.

  20. Quality Evaluation of Zirconium Dioxide Frameworks Produced in Five Dental Laboratories from Different Countries.

    Science.gov (United States)

    Schneebeli, Esther; Brägger, Urs; Scherrer, Susanne S; Keller, Andrea; Wittneben, Julia G; Hicklin, Stefan P

    2017-07-01

    The aim of this study was to assess and compare quality as well as economic aspects of CAD/CAM high strength ceramic three-unit FDP frameworks ordered from dental laboratories located in emerging countries and Switzerland. The master casts of six cases were sent to five dental laboratories located in Thailand (Bangkok), China (Peking and Shenzhen), Turkey (Izmir), and Switzerland (Bern). Each laboratory was using a different CAD/CAM system. The clinical fit of the frameworks was qualitatively assessed, and the thickness of the framework material, the connector height, the width, and the diameter were evaluated using a measuring sensor. The analysis of the internal fit of the frameworks was performed by means of a replica technique, whereas the inner and outer surfaces of the frameworks were evaluated for traces of postprocessing and damage to the intaglio surface with light and electronic microscopes. Groups (dental laboratories and cases) were compared for statistically significant differences using Mann-Whitney U-tests after Bonferroni correction. An acceptable clinical fit was found at 97.9% of the margins produced in laboratory E, 87.5% in B, 93.7% in C, 79.2% in A, and 62.5% in D. The mean framework thicknesses were not statistically significantly different for the premolar regions; however, for the molar area 4/8 of the evaluated sites were statistically significantly different. Circumference, surface, and width of the connectors produced in the different laboratories were statistically significantly different but not the height. There were great differences in the designs for the pontic and connector regions, and some of the frameworks would not be recommended for clinical use. Traces of heavy postprocessing were found in frameworks from some of the laboratories. The prices per framework ranged from US$177 to US$896. By ordering laboratory work in developing countries, a considerable price reduction was obtained compared to the price level in Switzerland

  1. Modern dental imaging: a review of the current technology and clinical applications in dental practice

    Energy Technology Data Exchange (ETDEWEB)

    Vandenberghe, Bart; Jacobs, Reinhilde [Katholieke Universiteit Leuven, Oral Imaging Centre, Faculty of Medicine, School of Dentistry, Oral Pathology and Maxillofacial Surgery, Leuven (Belgium); Bosmans, Hilde [Katholieke Universiteit Leuven, Radiology Section, Department of Medical Diagnostic Sciences, Leuven (Belgium)

    2010-11-15

    A review of modern imaging techniques commonly used in dental practice and their clinical applications is presented. The current dental examinations consist of intraoral imaging with digital indirect and direct receptors, while extraoral imaging is divided into traditional tomographic/panoramic imaging and the more recently introduced cone beam computed tomography. Applications, limitations and current trends of these dental ''in-office'' radiographic techniques are discussed. (orig.)

  2. Virtual Reality-Based Technologies in Dental Medicine: Knowledge, Attitudes and Practice among Students and Practitioners

    Science.gov (United States)

    Sabalic, Maja; Schoener, Jason D.

    2017-01-01

    Virtual reality-based technologies have been used in dentistry for almost two decades. Dental simulators, planning software and CAD/CAM (computer-aided design/computer-aided manufacturing) systems have significantly developed over the years and changed both dental education and clinical practice. This study aimed to assess the knowledge, attitudes…

  3. Radiation and Health Technology Laboratory Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Bihl, Donald E.; Lynch, Timothy P.; Murphy, Mark K.; Myers, Lynette E.; Piper, Roman K.; Rolph, James T.

    2005-07-09

    The Radiological Standards and Calibrations Laboratory, a part of Pacific Northwest National Laboratory (PNNL)(a) performs calibrations and upholds reference standards necessary to maintain traceability to national standards. The facility supports U.S. Department of Energy (DOE) programs at the Hanford Site, programs sponsored by DOE Headquarters and other federal agencies, radiological protection programs at other DOE and commercial nuclear sites and research and characterization programs sponsored through the commercial sector. The laboratory is located in the 318 Building of the Hanford Site's 300 Area. The facility contains five major exposure rooms and several laboratories used for exposure work preparation, low-activity instrument calibrations, instrument performance evaluations, instrument maintenance, instrument design and fabrication work, thermoluminescent and radiochromic Dosimetry, and calibration of measurement and test equipment (M&TE). The major exposure facilities are a low-scatter room used for neutron and photon exposures, a source well room used for high-volume instrument calibration work, an x-ray facility used for energy response studies, a high-exposure facility used for high-rate photon calibration work, a beta standards laboratory used for beta energy response studies and beta reference calibrations and M&TE laboratories. Calibrations are routinely performed for personnel dosimeters, health physics instrumentation, photon and neutron transfer standards alpha, beta, and gamma field sources used throughout the Hanford Site, and a wide variety of M&TE. This report describes the standards and calibrations laboratory.

  4. [A rapid prototype fabrication method of dental splint based on 3D simulation and technology].

    Science.gov (United States)

    Lin, Yanping; Chen, Xiaojun; Zhang, Shilei; Wang, Chengtao

    2006-04-01

    The conventional design and fabrication of the dental splint (in orthognathic surgery) is based on the preoperative planning and model surgery so this process is of low precision and efficiency. In order to solve the problems and be up to the trend of computer-assisted surgery, we have developed a novel method to design and fabricate the dental splint--computer-generated dental splint, which is based on three-dimensional model simulation and rapid prototype technology. After the surgical planning and simulation of 3D model, we can modify the model to be superior in chewing action (functional) and overall facial appearance (aesthetic). Then, through the Boolean operation of the dental splint blank and the maxillofacial bone model the model of dental splint is formed. At last, the dental splint model is fabricated through rapid prototype machine and applied in clinic. The result indicates that, with the use of this method, the surgical precision and efficiency are improved.

  5. The Software Technology Center at Lawrence Livermore National Laboratory: Software engineering technology transfer in a scientific R&D laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Zucconi, L.

    1993-12-01

    Software engineering technology transfer for productivity and quality improvement can be difficult to initiate and sustain in a non-profit research laboratory where the concepts of profit and loss do not exist. In this experience report, the author discusses the approach taken to establish and maintain a software engineering technology transfer organization at a large R&D laboratory.

  6. Air Force Research Laboratory Technology Milestones 2008

    Science.gov (United States)

    2008-01-01

    develop a unique measurement platform employing tunable diode laser absorption spectroscopy ( TDLAS ). The TDLAS platform provides a novel approach to...conduct research in the exploration and development of fundamental hypersonic aerospace technologies. TDLAS experiments are scheduled for three of...team expects that the TDLAS measurement platform will achieve Technology Readiness Level 6 status (i.e., system/subsystem model or prototype

  7. The Evaluation of Relationship between Spirometric Disorders and Methyl methacrylate in Dental Laboratories Personnel

    Directory of Open Access Journals (Sweden)

    E. Nadi

    2010-04-01

    Full Text Available Introduction & Objective: Methyl methacrylate (MMA, as a monomer of acrylic resin that has a wide variety of usages in denture fabrication, is considered as an air pollution indicator in the laboratories. Occupational exposure to these compound vapors can cause respiratory hypersensitivity, occupational asthma, eye and skin irritation and Allergic Contact Dermatitis (ACD. Therefore control of MMA exposure may promote the personnel’s health. The aim of this study was to determine the relationship between spirometric disorders and methyl methacrylate in dental laboratories personnel.. Materials & Methods: In this case control study, exposure of time-weighted average (TWA and short-term exposure level (STEL were measured with MMA vapors in 39 randomly selected male employee (case group in 25 denture fabrication laboratories in Hamadan city. The air samples were collected by sorbent tubes containing chromosorb (XAD2( and analyzed by gas chromatograph equipped with FID detector based on NIOSH method. In addition 30 men whitout occupational exposure to air pollutants (control group were selected to compare the variation of spirometric parameters. Spirometric parameters of the case and control groups such as FVC, FEV1, FEV1/FVC and FEF25-75 were measured by Vitalograph spirometer (model: 2120 on ATS method, after the standard questionnaire of respiratory diseases had been completed during an interview and medical examination..Results: The mean of MMA concentration was 132.87 ± 220.67 ppm for STEL and 1.95 ± 3.59 ppm for TWA.The relationship between MMA concentration in the STEL and TWA exposures was significant (P<0.05 and the relationship between MMA concentration and ventilation was significant just for STEL. In this study no relationship between MMA concentration and spirometric parameters in both STEL and TWA exposures was found. Also there was no significant difference between spirometric parameters of the case group and normal values of the

  8. Self-reported oral health behavior and attitudes of dental and technology students in Lithuania.

    Science.gov (United States)

    Pacauskiene, Ingrida M; Smailiene, Dalia; Siudikienė, Jolanta; Savanevskyte, Julija; Nedzelskiene, Irena

    2014-01-01

    The aim of the present study was to assess self-reported oral health habits, attitudes, lifestyle between the sample groups of preclinical and clinical dental and technology students in Lithuania using the Hiroshima University Dental Behavioral Inventory (HU-DBI), and to evaluate the impact of education on their behavior and self-reported oral health. A sample of 183 dental and 75 technology students at the Lithuanian University of Health Sciences, Medical Academy, Faculty of Odontology, and Kaunas University of Technology completed the Lithuanian version the HU-DBI questionnaire with 11 additional items. The data were analyzed using the "SPSS 19.0 for Windows" software package. The mean HU-DBI score of clinical final-year dentistry students was significantly higher (p=0.001) than the score of the preclinical group (6.81 (1.2) and 5.96 (1.5), respectively). The mean scores of both groups of dental students were significantly (p<0.05) higher than that of the technology group (5.37 (1.8)). Oral health behaviors and knowledge were superior in dental students. Dental education had a significant positive impact on the oral health and behavior improvement. The attitudes of the Lithuanian dental students should be further improved by initiating a comprehensive program that would emphasize the importance of oral hygiene before the clinical program starts.

  9. Brookhaven National Laboratory technology transfer report, fiscal year 1986

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    An increase in the activities of the Office of Research and Technology Applications (ORTA) is reported. Most of the additional effort has been directed to the regional electric utility initiative, but intensive efforts have been applied to the commercialization of a compact synchrotron storage ring for x-ray lithography applications. At least six laboratory technologies are reported as having been transferred or being in the process of transfer. Laboratory accelerator technology is being applied to study radiation effects, and reactor technology is being applied for designing space reactors. Technologies being transferred and emerging technologies are described. The role of the ORTA and the technology transfer process are briefly described, and application assessment records are given for a number of technologies. A mini-incubator facility is also described. (LEW)

  10. The Hydrogen Technology Center at Wyle Laboratories

    Science.gov (United States)

    Wheelock, H.; Smith, D.; Frazier, J.

    1990-10-01

    A deactivated storable propellant test area with numerous test cells, large open concrete pads of up to 65-ft length, and two enclosed metal storage buildings, has been converted into a Hydrogen Technology Center. The conversion strategy involved extensive use of modified surplus equipment, well established testing technologies, and innovative engineering to obviate long-delivery time items. Simple, high heat flux water-to-cryogen heat exchangers are used to generate ambient temperature H2 and N gas. Hydrogen-fueled combustors were designed and fabricated to power the specialized heat exchangers required to support high-temperature hydrogen experiments. The facility has operated productively and safely since October, 1988.

  11. Air Force Research Laboratory Technology Milestones 2007

    Science.gov (United States)

    2007-01-01

    Martin Aerodynamics, and ZONA Technology worked with collaborators from the National Aeronautics and Space Administration (NASA) to develop the MEDFFAT...be used on either the wet side (for live fire evaluations) or the dry side (for vehicle and other non-fire-related evaluations). The entire mockup is...devices in common aluminum foil by using inexpensive wet chemical processing. For more information contact publicaffairs@afosr.afmil ° (703)696-7797 U

  12. Grid Technologies for Virtual Laboratories in Engineering Education

    Directory of Open Access Journals (Sweden)

    Christian Schmid

    2008-02-01

    Full Text Available In this paper, Grid technologies are introduced to build e-Learning environments for engineering education. Service-oriented Grids open new fields of applications, the Learning Grids. The learning services concept based on a learning model and their deployment through Grid technologies are excellent means to integrate virtual laboratories into e-Learning environments for engineering education. The paper goes into the most important technical details, introduces into the used learning model, and shows the au-thoring of Grid resources for virtual laboratories. Examples from a virtual laboratory demonstrate the advantages of a Grid.

  13. Prediction of practical performance in preclinical laboratory courses - the return of wire bending for admission of dental students in Hamburg.

    Science.gov (United States)

    Kothe, Christian; Hissbach, Johanna; Hampe, Wolfgang

    2014-01-01

    Although some recent studies concluded that dexterity is not a reliable predictor of performance in preclinical laboratory courses in dentistry, they could not disprove earlier findings which confirmed the worth of manual dexterity tests in dental admission. We developed a wire bending test (HAM-Man) which was administered during dental freshmen's first week in 2008, 2009, and 2010. The purpose of our study was to evaluate if the HAM-Man is a useful selection criterion additional to the high school grade point average (GPA) in dental admission. Regression analysis revealed that GPA only accounted for a maximum of 9% of students' performance in preclinical laboratory courses, in six out of eight models the explained variance was below 2%. The HAM-Man incrementally explained up to 20.5% of preclinical practical performance over GPA. In line with findings from earlier studies the HAM-Man test of manual dexterity showed satisfactory incremental validity. While GPA has a focus on cognitive abilities, the HAM-Man reflects learning of unfamiliar psychomotor skills, spatial relationships, and dental techniques needed in preclinical laboratory courses. The wire bending test HAM-Man is a valuable additional selection instrument for applicants of dental schools.

  14. Technological advances in the hemostasis laboratory.

    Science.gov (United States)

    Lippi, Giuseppe; Plebani, Mario; Favaloro, Emmanuel J

    2014-03-01

    Automation is conventionally defined as the use of machines, control systems, and information technologies to optimize productivity. Although automation is now commonplace in several areas of diagnostic testing, especially in clinical chemistry and immunochemistry, the concept of extending this process to hemostasis testing has only recently been advanced. The leading drawbacks are still represented by the almost unique biological matrix because citrated plasma can only be used for clotting assays and few other notable exceptions, and by the highly specific pretreatment of samples, which is particularly distinct to other test systems. Despite these important limitations, a certain degree of automation is also now embracing hemostasis testing. The more relevant developments include the growing integration of routine hemostasis analyzers with track line systems and workcells, the development of specific instrumentation tools to enhance reliability of testing (i.e., signal detection with different technologies to increase test panels, plasma indices for preanalytical check of interfering substances, failure patterns sensors for identifying insufficient volume, clots or bubbles, cap-piercing for enhancing operator safety, automatic reflex testing, automatic redilution of samples, and laser barcode readers), preanalytical features (e.g., positive identification, automatic systems for tube(s) labeling, transillumination devices), and postphlebotomy tools (pneumatic tube systems for reducing turnaround time, sample transport boxes for ensuring stability of specimens, monitoring systems for identifying unsuitable conditions of transport). Regardless of these important innovations, coagulation/hemostasis testing still requires specific technical and clinical expertise, not only in terms of measurement procedures but also for interpreting and then appropriately utilizing the derived information. Thus, additional and special caution has to be used when designing projects of

  15. [Exploration of basic restorative dental materials teaching in the field of dental technology].

    Science.gov (United States)

    Jin, Yan-ting

    2012-12-01

    This study was to compare the difference of the existing course materials of basic restorative dental with the past materials, found out the weakness of teaching mode before the reform, and explored the reform in education through teaching content, method and evaluation, in order to improve the teaching quality.

  16. Oak Ridge National Laboratory Technology Logic Diagram. Indexes

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Decontamination and Decommissioning (D&D) Index provides a comprehensive list of site problems, problem area/constituents, remedial technologies, and regulatory terms discussed in the D&D sections of the Oak Ridge National Laboratory Technology Logic Diagram. All entries provide specific page numbers, or cross-reference entries that provide specific page numbers, in the D&D volumes (Vol. 1, Pt. A; Vol. 2, Pt. A; and appropriate parts of Vol. 3). The Oak Ridge National Laboratory Technology (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA) and WM activities. It is essential that follow-on engineering studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in the TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk.

  17. Effects of Various Dental Materials on Alkaline Phosphatase Extracted from Pulp: An Experiment for the Biochemistry Laboratory.

    Science.gov (United States)

    Thompson, Lorin R.

    1980-01-01

    A laboratory experiment that demonstrates the effects of various dental materials on a representative enzyme from the pulp is outlined. The experiment encourages students to consider the effects that various restorative materials and techniques might have on enzymes in the living pulp. (Author/MLW)

  18. Promoting Rapid Learning in the Histology Laboratory by Integrating Technology

    Science.gov (United States)

    Shields, Vonnie

    2008-01-01

    This paper describes the results of incorporating technology in the histology laboratory by using high-resolution video-imaging equipment (VIE). The study sought to determine if (1) the VIE would allow students to more easily and rapidly find histological structures over more conventional methods, and (2) if they could find the structures with the…

  19. Promoting Rapid Learning in the Histology Laboratory by Integrating Technology

    Science.gov (United States)

    Shields, Vonnie

    2008-01-01

    This paper describes the results of incorporating technology in the histology laboratory by using high-resolution video-imaging equipment (VIE). The study sought to determine if (1) the VIE would allow students to more easily and rapidly find histological structures over more conventional methods, and (2) if they could find the structures with the…

  20. A Collaborative, Investigative Recombinant DNA Technology Course with Laboratory

    Science.gov (United States)

    Pezzementi, Leo; Johnson, Joy F.

    2002-01-01

    A recombinant DNA technology course was designed to promote contextual, collaborative, inquiry-based learning of science where students learn from one another and have a sense of ownership of their education. The class stressed group presentations and critical reading and discussion of scientific articles. The laboratory consisted of two research…

  1. FY04 Engineering Technology Reports Laboratory Directed Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    Sharpe, R M

    2005-01-27

    This report summarizes the science and technology research and development efforts in Lawrence Livermore National Laboratory's Engineering Directorate for FY2004, and exemplifies Engineering's more than 50-year history of developing the technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence and has prepared for this role with a skilled workforce and the technical resources developed through venues like the Laboratory Directed Research and Development Program (LDRD). This accomplishment is well summarized by Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow''. Engineering's investment in technologies is carried out through two programs, the ''Tech Base'' program and the LDRD program. LDRD is the vehicle for creating those technologies and competencies that are cutting edge. These require a significant level of research or contain some unknown that needs to be fully understood. Tech Base is used to apply technologies to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice''. Therefore, the LDRD report covered here has a strong research emphasis. Areas that are presented all fall into those needed to accomplish our mission. For FY2004, Engineering's LDRD projects were focused on mesoscale target fabrication and characterization, development of engineering computational capability, material studies and modeling, remote sensing and communications, and microtechnology and nanotechnology for national security applications. Engineering's five Centers, in partnership with the Division Leaders and Department Heads, are responsible for guiding the long-term science and technology investments for the Directorate. The Centers represent technologies that have been identified as

  2. FY03 Engineering Technology Reports Laboratory Directed Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C

    2004-03-05

    This report summarizes the science and technology research and development efforts in Lawrence Livermore National Laboratory's Engineering Directorate for FY2003, and exemplifies Engineering's 50-year history of researching and developing the engineering technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence, and has prepared for this role with a skilled workforce and the technical resources developed through venues like the Laboratory Directed Research and Development Program (LDRD). This accomplishment is well summarized by Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Engineering's investment in technologies is carried out through two programs, the LDRD program and the ''Tech Base'' program. LDRD is the vehicle for creating those technologies and competencies that are cutting edge, or that require a significant level of research, or contain some unknown that needs to be fully understood. Tech Base is used to apply those technologies, or adapt them to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice.'' Therefore, the LDRD report covered here has a strong research emphasis. Areas that are presented all fall into those needed to accomplish our mission. For FY2003, Engineering's LDRD projects were focused on mesoscale target fabrication and characterization, development of engineering computational capability, material studies and modeling, remote sensing and communications, and microtechnology and nanotechnology for national security applications. Engineering's five Centers, in partnership with the Division Leaders and Department Heads, are responsible for guiding the science and technology investments for the Directorate. The Centers represent technology

  3. Laboratory Technology Research: Abstracts of FY 1996 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of this country: the world-class basic research capability of the DOE Energy Research (ER) multi-program national laboratories and the unparalleled entrepreneurial spirit of American industry. Projects supported by the LTR program are conducted by the five ER multi-program laboratories: Argonne, Brookhaven, Lawrence Berkeley, Oak Ridge, and Pacific Northwest National Laboratories. These projects explore the applications of basic research advances relevant to Department of Energy`s (DOE) mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials, intelligent processing/manufacturing research, and sustainable environments.

  4. Laboratory 3.0: Manufacturing Technologies Laboratory Virtualization with a Student-Centred Methodology

    Science.gov (United States)

    Fabregat-Sanjuan, Albert; Pàmies-Vilà, Rosa; Ferrando Piera, Francesc; De la Flor López, Silvia

    2017-01-01

    This paper presents a blended-learning strategy for improving the teaching method applied in the laboratory subject Manufacturing Technologies. The teaching method has been changed from a predominantly teacher-centred to an active learning system with a student-centred focus and e-learning activities. In face-to-face classes, a game-based learning…

  5. What dental educators need to understand about emerging technologies to incorporate them effectively into the educational process.

    Science.gov (United States)

    Stein, Corey D; Eisenberg, Elise S; O'Donnell, Jean A; Spallek, Heiko

    2014-04-01

    Many dental schools are currently struggling with the adoption of emerging technologies and the incorporation of these technologies into the educational process. Dental students exhibit an increasing degree of digital comfort when using social networking, mobile devices, search engines, or e-textbooks. Although the majority of students might consider themselves to be very skilled at using information technology, many faculty members would claim the opposite when evaluating their own knowledge and skills in the use of technology. As the use of technology, both formally and informally, continues to increase, dental educators are faced with many questions, such as: Does students' digital comfort disguise a lack of information literacy? What is the appropriate path of implementing technology into teaching and learning, and how can institutions support such an implementation? This article surveys a series of myths that exist about the use of technology in education and raises questions about their validity and how dental educators can avoid being misled by them.

  6. Laboratory technology research - abstracts of FY 1997 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of this country: the world-class basic research capability of the DOE Energy Research (ER) multi-program national laboratories and the unparalleled entrepreneurial spirit of American industry. A distinguishing feature of the ER multi-program national laboratories is their ability to integrate broad areas of science and engineering in support of national research and development goals. The LTR program leverages this strength for the Nation`s benefit by fostering partnerships with US industry. The partners jointly bring technology research to a point where industry or the Department`s technology development programs can pursue final development and commercialization. Projects supported by the LTR program are conducted by the five ER multi-program laboratories. These projects explore the applications of basic research advances relevant to DOE`s mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials; intelligent processing/manufacturing research; and sustainable environments.

  7. Implementation strategies for incorporating new technologies into the dental practice.

    Science.gov (United States)

    Hakim, Foroud; Kachalia, Parag R

    2010-05-01

    Staying ahead of the technology curve is an ongoing challenge for all dentists. Ignoring advancements in technology and the related improvements in diagnostics and delivery of care, as well as the impact technology may have on productivity in practice, is simply not an option for the modern clinician who aims to maintain a successful contemporary practice. This article delivers some insight into the challenges that arise when upgrades in technology and the related acquisition investment are considered.

  8. MODERN TRENDS IN THE DEVELOPMENT OF THE TECHNOLOGIES FOR PRODUCTION OF DENTAL CONSTRUCTIONS.

    Directory of Open Access Journals (Sweden)

    Tsanka Dikova

    2015-12-01

    Full Text Available The aim of the present paper is to make a review of the modern trends in the development of the technologies for production of dental constructions. Three are the main trends in production technologies in dentistry last 30 years: digitalization, simulation and implementation of additive technologies. The simulation occurred first and due to the computers development it underwent fast progress from the mathematical calculations and analytical analysis to the 3D modeling and visualization. Thus Computer Aided Engineering (CAE was developed, allowing dental constructions with optimal design to be produced by optimal technological regimes. The first Computer Aided Design (CAD – Computer Aided Manufacturing (CAM systems were created in 1970s as a result of the digitalization. In this mode of operation at first virtual 3D model is generated by CAD, which then is used for production of the real construction by CAM. The CAD-CAM systems allow fabrication of dental restorations which is difficult or impossible to be manufactured by conventional technologies. The development of CAD unit runs from indirect scanning of the plaster model for obtaining data for the 3D model to direct scanning of the prosthesis area. While the development of CAM unit leads to direct manufacturing of the real dental construction using subtractive or additive technologies. The future development of the CAD-CAM systems as a whole characterizes with transition from closed to open access systems, which make them more flexible. In the late 1980sthe new approach to the production of constructions appeared – by addition of material layer by layer. The additive technologies were developed. They characterize with building of one layer at a time from a powder or liquid that is bonded by means of melting, fusing or polymerization. Stereo lithography, fused deposition modeling, selective electron beam melting, laser powder forming and inkjet printing are the methods, mostly used in

  9. Remote laboratories: new technology and standard based architecture

    CERN Document Server

    Benmohamed, Hcene; Prévot, Patrick

    2004-01-01

    E-Laboratories are important components of e- learning environments, especially in scientific and technical disciplines. First widespread E-Labs consisted in proposing simulations of real systems (virtual labs), as building remote labs (remote control of real systems) was difficult by lack of industrial standards and common protocols. Nowadays, robotics and automation technologies make easier the interfacing of systems with computers. In this frame, many researchers (such as those mentioned in [1]) focus on how to set up such a remote control. But, only a few of them deal with the educational point of view of the problem. This paper outlines our current research and reflection about remote laboratory modelling.

  10. A prototype catalogue: DOE National Laboratory technologies for infrastructure modernization

    Energy Technology Data Exchange (ETDEWEB)

    Currie, J.W.; Wilfert, G.L.; March, F.

    1990-01-01

    The purpose of this report is to provide the Office of Technology Assessment (OTA) with information about selected technologies under development in the Department of Energy (DOE) through its National Laboratory System and its Program Office operations. The technologies selected are those that have the potential to improve the performance of the nation's public works infrastructure. The product is a relational database that we refer to as a prototype catalogue of technologies.'' The catalogue contains over 100 entries of DOE-supported technologies having potential application to infrastructure-related problems. The work involved conceptualizing an approach, developing a framework for organizing technology information, and collecting samples of readily available data to be put into a prototype catalogue. In developing the catalogue, our objectives were to demonstrate the concept and provide readily available information to OTA. As such, the catalogue represents a preliminary product. The existing database is not exhaustive and likely represents only a fraction of relevant technologies developed by DOE. In addition, the taxonomy we used to classify technologies is based on the judgment of project staff and has received minimal review by individuals who have been involved in the development and testing of the technologies. Finally, end users will likely identify framework changes and additions that will strengthen the catalogue approach. The framework for the catalogue includes four components: a description of the technology, along with potential uses and other pertinent information; identification of the source of the descriptive information; identification of a person or group knowledgeable about the technology; and a classification of the described technology in terms of its type, application, life-cycle use, function, and readiness.

  11. Comparison of laboratory and immediate diagnosis of coagulation for patients under oral anticoagulation therapy before dental surgery

    OpenAIRE

    2005-01-01

    Abstract Background Dental surgery can be carried out on patients under oral anticoagulation therapy by using haemostyptic measures. The aim of the study was a comparative analysis of coagulation by laboratory methods and immediate patient diagnosis on the day of the planned procedure. Methods On the planned day of treatment, diagnoses were carried out on 298 patients for Prothrombin Time (PT), the International Normalised Ratio (INR), and Partial Thromboplastin Time (PTT). The decision to pr...

  12. Advances in Measurement Technology at NIST's Physical Measurement Laboratory

    Science.gov (United States)

    Dehmer, Joseph

    2014-03-01

    The NIST mission is to promote U.S. innovation and industrial competitiveness by advancing measurement science, standards, and technology. The Physical Measurement Laboratory (PML) has responsibility for maintaining national standards for two dozen physical quantities needed for international trade; and, importantly, it carries out advanced research at the frontiers of measurement science to enable extending innovation into new realms and new markets. This talk will highlight advances being made across several sectors of technology; and it will describe how PML interacts with its many collaborators and clients in industry, government, and academe.

  13. The principles of Health Technology Assessment in laboratory medicine.

    Science.gov (United States)

    Liguori, Giorgio; Belfiore, Patrizia; D'Amora, Maurizio; Liguori, Renato; Plebani, Mario

    2017-01-01

    The Health Technology Assessment (HTA) is a multi-professional and multidisciplinary evaluation approach designed to assess health technology in the broadest sense of the term, from its instruments to the rearranging of its organizational structures. It is by now an established methodology at national and international levels that involves several medical disciplines thanks to its versatility. Laboratory medicine is one of these disciplines. Such specialization was subjected, in recent years, to deep changes even from an organizational standpoint, in order to meet the health needs of the population, making them as effective and cost-effective as possible. In this regard, HTA was the tool used to assess implications in different areas.

  14. Sensing and characterization technologies at Los Alamos National Laboratory.

    Science.gov (United States)

    Eiden, G C; Hemberger, P H; Johnston, R G; Nogar, N S

    1996-11-01

    We describe four sensing and characterization technologies recently developed at Los Alamos National Laboratory; a select set of mass spectral and optical techniques is emphasized. This work describes new, or newly developed, technologies which can be used for on-site, at-line and laboratory analyses. These include two each of optical-and mass spectrometric-based systems. We describe first a field deployable mass spectrometer, based on an ion trap analyzer, and variants of that system. We then describe a hand-held, battery-operated optical spectrometer, usable in either absorption, or fluorescence excitation mode. A laser-based mass spectrometer is also described, which used a minimal tunable laser system, and a time-of-flight mass spectrometer. Finally, a Zeeman effect optical diffractomer is described.

  15. Structural and morphological approach of Co-Cr dental alloys processed by alternative manufacturing technologies

    Science.gov (United States)

    Porojan, Sorin; Bîrdeanu, Mihaela; Savencu, Cristina; Porojan, Liliana

    2017-08-01

    The integration of digitalized processing technologies in traditional dental restorations manufacturing is an emerging application. The objective of this study was to identify the different structural and morphological characteristics of Co-Cr dental alloys processed by alternative manufacturing techniques in order to understand the influence of microstructure on restorations properties and their clinical behavior. Metallic specimens made of Co-Cr dental alloys were prepared using traditional casting (CST), and computerized milling (MIL), selective laser sintering (SLS) and selective laser melting (SLM). The structural information of the samples was obtained by X-ray diffraction, the morphology and the topography of the samples were investigated by Scanning Electron Microscopy and Atomic Force Microscope. Given that the microstructure was significantly different, further differences in the clinical behavior of prosthetic restorations manufactured using additive techniques are anticipated.

  16. Self-Reported Obstacles to Regular Dental Care among Information Technology Professionals

    Science.gov (United States)

    Reddy, L. Swetha; Reddy, B. Srikanth; Kulkarni, Suhas; Reddy, M. Padma; Satyanarayana, D.; Baldava, Pavan

    2016-01-01

    Introduction Good oral health is important for an individual as well as social well-being. Occupational stress and work exhaustion in Information Technology (IT) professionals may influence the oral health and oral health related quality of life. Aim To assess and compare self-reported obstacles for regular dental care and dental visits among IT professionals based on age, gender, dental insurance and working days per week. Materials and Methods A cross-sectional study was conducted among 1,017 IT professionals to assess the self-reported obstacles to regular oral health care in Hyderabad city, Telangana, India. The Dental Rejection of Innovation Scale (DRI-S) was employed in this study. Comparison between means of DRI-S based on variables was done using t-test and ANOVA. The association between variables and DRI-S was determined using Chi-square test. Results A total of 1017 participants comprising of 574 (56%) males and 443 (44%) females participated in the study. As age increased, a significant increase in mean DRI-S scores was seen for total and individual domains except for the “Situational” domain wherein higher mean score (9.42±2.5; p=0.0006) was observed among 30–39 years age group. Even though females reported higher mean scores for total and individual domains when compared to males, nevertheless significant difference was seen only for total (p=0.03) and “Lack of Knowledge” (p=0.001) domain. Conclusion Self-reported obstacles to regular dental care was more with increasing age, increased number of working days per week, irregular dental visits and absence of dental insurance facility. PMID:27891475

  17. Tooth brushing, tongue cleaning and snacking behaviour of dental technology and therapist students

    Directory of Open Access Journals (Sweden)

    Clement C. Azodo

    2010-08-01

    Full Text Available Objective: To determine the tooth brushing, tongue cleaning and snacking behaviour of dental technology and therapist students. Methods: A descriptive cross-sectional study of students of Federal School of Dental Therapy and Technology Enugu, Nigeria. Self-administered questionnaire was used to obtain information on demography, frequency, duration and technique of tooth brushing and tongue cleaning as well as information on consumption of snacks. Results: A total of 242 students responded. Dental technology students made up 52.5% of the respondents and dental therapist in training made up 47.5%. Majority (63.2% of the respondents considered the strength of tooth brush when purchasing a tooth brush and 78.9% use tooth brushes with medium strength. Seven-tenth (71.9% of the respondents brush their teeth twice daily and 52.1% brush for 3–5 minutes. About one-third (30.2% brush their teeth in front of a mirror. Chewing stick was used by 51.7% of respondents in addition to the use of tooth brush. Tongue cleaning was done by 94.2% with only 9.5% using a tongue cleaner. Only 20.2% reported regular snacks consumption. Nine-tenth (90.4% of respondents were previously involved in educating others, apart from their colleagues, on tooth brushing. Conclusion: This survey revealed that most of the dental therapy and technology students had satisfactory tooth-brushing behaviour. The zeal to educate others about proper tooth brushing revealed in this study suggests that the students may be helpful in oral health promotion.

  18. Benchmarking International High-Technology Research Laboratories' Marketing in Europe

    OpenAIRE

    Salonen, Suvi-Anna

    2014-01-01

    The thesis studies current marketing conventions of international high-technology research laboratories in Europe and is done for the UNELMA-project. UNELMA is a joint project between Finnish and Swedish universities and institutions funded by the European Union, the Provincial Government of Norbotten, Lapin Liitto and Interreg IV A. The project wishes to create a network of professional services which will benefit companies in the Bothnian Arc between Finland and Sweden. The study itself...

  19. MIT Lincoln Laboratory: Physics and Technology in the National Interest

    Science.gov (United States)

    Ralston, Richard

    2001-03-01

    This year, MIT is celebrating the 50th anniversary of the founding of Lincoln Laboratory, which was formed at the request of the DoD with the initial goal of developing a national air defense system. In its 50 years, the Laboratory staff have made significant contributions in diverse areas including radar imaging, satellite communications, digital signal processing, computer science, semiconductor materials and solid state physics. The Laboratory has been true to its mission statement, which places strong emphasis on the application of advanced electronics to R&D in the national interest. Much of the technology is transitioned to U.S. industry for both government and commercial use. Annually more than 500 publications and meeting speeches are given, and cooperative developments with industry have targeted technology transitions ranging from next-generation photolithographic tools to microchip lasers. The Laboratory staff have been granted over 400 patents, and license to this intellectual property is at the core of many of the over 70 spin-off companies. MIT employs 2,300 people at Lincoln, including 1,200 professionals with degrees in physics, math, computer science, materials science and the engineering disciplines. Two-fifths of the professional staff are at the doctoral level; over two-thirds hold advanced degrees. This presentation will describe recent examples of research challenges for physicists in a multidisciplinary project-oriented environment.

  20. Load Disaggregation Technologies: Real World and Laboratory Performance

    Energy Technology Data Exchange (ETDEWEB)

    Mayhorn, Ebony T.; Sullivan, Greg P.; Petersen, Joseph M.; Butner, Ryan S.; Johnson, Erica M.

    2016-09-28

    Low cost interval metering and communication technology improvements over the past ten years have enabled the maturity of load disaggregation (or non-intrusive load monitoring) technologies to better estimate and report energy consumption of individual end-use loads. With the appropriate performance characteristics, these technologies have the potential to enable many utility and customer facing applications such as billing transparency, itemized demand and energy consumption, appliance diagnostics, commissioning, energy efficiency savings verification, load shape research, and demand response measurement. However, there has been much skepticism concerning the ability of load disaggregation products to accurately identify and estimate energy consumption of end-uses; which has hindered wide-spread market adoption. A contributing factor is that common test methods and metrics are not available to evaluate performance without having to perform large scale field demonstrations and pilots, which can be costly when developing such products. Without common and cost-effective methods of evaluation, more developed disaggregation technologies will continue to be slow to market and potential users will remain uncertain about their capabilities. This paper reviews recent field studies and laboratory tests of disaggregation technologies. Several factors are identified that are important to consider in test protocols, so that the results reflect real world performance. Potential metrics are examined to highlight their effectiveness in quantifying disaggregation performance. This analysis is then used to suggest performance metrics that are meaningful and of value to potential users and that will enable researchers/developers to identify beneficial ways to improve their technologies.

  1. 3D Metal Printing - Additive Manufacturing Technologies for Frameworks of Implant-Borne Fixed Dental Prosthesis.

    Science.gov (United States)

    Revilla León, M; Klemm, I M; García-Arranz, J; Özcan, M

    2017-09-01

    An edentulous patient was rehabilitated with maxillary metal-ceramic and mandibular metal-resin implant-supported fixed dental prosthesis (FDP). Metal frameworks of the FDPs were fabricated using 3D additive manufacturing technologies utilizing selective laser melting (SLM) and electron beam melting (EBM) processes. Both SLM and EBM technologies were employed in combination with computer numerical control (CNC) post-machining at the implant interface. This report highlights the technical and clinical protocol for fabrication of FDPs using SLM and EBM additive technologies. Copyright© 2017 Dennis Barber Ltd.

  2. From information technology to informatics: the information revolution in dental education.

    Science.gov (United States)

    Schleyer, Titus K; Thyvalikakath, Thankam P; Spallek, Heiko; Dziabiak, Michael P; Johnson, Lynn A

    2012-01-01

    The capabilities of information technology (IT) have advanced precipitously in the last fifty years. Many of these advances have enabled new and beneficial applications of IT in dental education. However, conceptually, IT use in dental schools is only in its infancy. Challenges and opportunities abound for improving how we support clinical care, education, and research with IT. In clinical care, we need to move electronic dental records beyond replicating paper, connect information on oral health to that on systemic health, facilitate collaborative care through teledentistry, and help clinicians apply evidence-based dentistry and preventive management strategies. With respect to education, we should adopt an evidence-based approach to IT use for teaching and learning, share effective educational content and methods, leverage technology-mediated changes in the balance of power between faculty and students, improve technology support for clinical teaching, and build an information infrastructure centered on learners and organizations. In research, opportunities include reusing clinical care data for research studies, helping advance computational methods for research, applying generalizable research tools in dentistry, and reusing research data and scientific workflows. In the process, we transition from a focus on IT-the mere technical aspects of applying computer technology-to one on informatics: the what, how, and why of managing information.

  3. 2011 Mississippi Curriculum Framework: Postsecondary Dental Hygiene Technology. (Program CIP: 51.0602 - Dental Hygienist)

    Science.gov (United States)

    Alexander, Nick; Dunn, Catherine; Hill, Stanley; Lindsay, William

    2011-01-01

    As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

  4. Remote participation technologies in the EFDA Laboratories - status and prospects

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, V. [Associazione EURATOM-ENEA sulla Fusione, Consorzio RFX, Padova (Italy); How, J.A. [Association Euratom-CEA Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee

    2003-07-01

    More than 25 laboratories of the European Fusion Development Agreement (EFDA) have been increasingly using remote participation (RP) technologies for collaborative work on several experiments. We present an overview of the technologies that are employed to provide remote data access, remote computer access, and tele-conference. We also deal with computer network requirements, and support and documentation needs. The biggest application of these tools has been the joint scientific exploitation of the JET Facilities. Increasingly other experiments are operated as shared facilities, and the RP tools are being used in this context. For remote data access there is a clear trend towards MDSplus as common data access layer for multi-experiment data access. Secure Remote Computer access is converging on two different solutions. Video-conference is also converging on two partially inter-operable solutions, whereas the sharing of presentation material is converging on one solution. Remote Control Room participation is being used in two laboratories. Network monitoring has been developed and is now in routine use. The RP work is being done at many laboratories and is co-ordinated by EFDA. A number of items in several fields need still to be tackled and an overview of these is presented. (authors)

  5. Overview of laser technology at Los Alamos National Laboratory

    Science.gov (United States)

    Lewis, G. K.; Cremers, D. A.

    Los Alamos National Laboratory has had a long history of involvement in laser sciences and has been recognized both for its large laser programs and smaller scale developments in laser technology and applications. The first significant program was with the Rover nuclear-based rocket propulsion system in 1968 to study laser initiated fusion. From here applications spread to programs in laser isotope separation and development of large lasers for fusion. These programs established the technological human resource base of highly trained laser physicists, engineers, and chemists that remain at the Laboratory today. Almost every technical division at Los Alamos now has some laser capability ranging from laser development, applications, studies on nonlinear processes, modeling and materials processing. During the past six years over eight R&D-100 Awards have been received by Los Alamos for development of laser-based techniques and instrumentation. Outstanding examples of technology developed include LIDAR applications to environmental monitoring, single molecule detection using fluorescence spectroscopy, a laser-based high kinetic energy source of oxygen atoms produced by a laser-sustained plasma, laser-induced breakdown spectroscopy (LIBS) for compositional, analysis, thin film high temperature superconductor deposition, multi-station laser welding, and direct metal deposition and build-up of components by fusing powder particles with a laser beam.

  6. Laboratory technology research: Abstracts of FY 1998 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of the country: the world-class basic research capability of the DOE Office of Science (SC) national laboratories and the unparalleled entrepreneurial spirit of American industry. Projects supported by the LTR program in FY 1998 explore the applications of basic research advances relevant to DOE`s mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials, intelligent processing and manufacturing research, and environmental and biomedical research. Abstracts for 85 projects are contained in this report.

  7. Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R&D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI).

  8. Emerging technologies for diagnosis of dental caries: The road so far

    Science.gov (United States)

    Amaechi, Bennett T.

    2009-05-01

    It is now universally recognized that the development of new technologies for early detection and quantitative monitoring of dental decay at an early stage of formation could provide health and economic benefits ranging from timely preventive interventions to reduction in the time required for clinical trials of anticaries agents. The use of technologies as adjunct to clinical visual examination for caries diagnosis will facilitate preventive care in dentistry to lower treatment cost as well as reduce the cost and time for testing potential anticaries agents. This article describes the various technologies available to aid the dental practitioners in detecting dental caries at the earliest stage of its formation, assessing the activities of the detected carious lesion, and quantitatively or qualitatively monitoring of the lesion over time. The need and the importance of these technologies were also discussed. The data discussed are primarily based on published scientific studies and reviews from case reports, clinical trials, and in vitro and in vivo studies. References have been traced manually by MEDLINE® or through manufacturer's websites. While some of the devices are fully developed and commercially available, others are still under development. The devices vary in their modes of action as well as their capability as caries diagnostic aids. It is clear that the differences in caries presentations and behavior in different anatomical sites make it unlikely that any one diagnostic modality will have adequate sensitivity and specificity of detection of carious lesions for all sites; a combination of diagnostic tools will help us diagnose lesions earlier and detect failing restorations sooner, all to avoid more costly, destructive dental procedures and truly take dentistry into the preventive rather than the reactive mode.

  9. The method of manufacture of nylon dental partially removable prosthesis using additive technologies

    Science.gov (United States)

    Kashapov, R. N.; Korobkina, A. I.; Platonov, E. V.; Saleeva, G. T.

    2014-12-01

    The article is devoted to the topic of creating new methods of dental prosthesis. The aim of this work is to investigate the possibility of using additive technology to create nylon prosthesis. As a result of experimental studies, was made a sample of nylon partially removable prosthesis using 3D printing has allowed to simplify, accelerate and reduce the coat of manufacturing high-precision nylon dentures.

  10. 76 FR 12507 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2011-03-07

    ... Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration Project... monitor the fair, equitable, and consistent implementation of the provisions of the demonstration project... March 7, 2011 Part III Department of Defense Science and Technology Reinvention Laboratory...

  11. An Analysis of Medical Laboratory Technology Journals' Instructions for Authors.

    Science.gov (United States)

    Horvat, Martina; Mlinaric, Ana; Omazic, Jelena; Supak-Smolcic, Vesna

    2016-08-01

    Instructions for authors (IFA) need to be informative and regularly updated. We hypothesized that journals with a higher impact factor (IF) have more comprehensive IFA. The aim of the study was to examine whether IFA of journals indexed in the Journal Citation Reports 2013, "Medical Laboratory Technology" category, are written in accordance with the latest recommendations and whether the quality of instructions correlates with the journals' IF. 6 out of 31 journals indexed in "Medical Laboratory Technology" category were excluded (unsuitable or unavailable instructions). The remaining 25 journals were scored based on a set of 41 yes/no questions (score 1/0) and divided into four groups (editorial policy, research ethics, research integrity, manuscript preparation) by three authors independently (max score = 41). We tested the correlation between IF and total score and the difference between scores in separate question groups. The median total score was 26 (21-30) [portion of positive answers 0.63 (0.51-0.73)]. There was no statistically significant correlation between a journal's IF and the total score (rho = 0.291, P = 0.159). IFA included recommendations concerning research ethics and manuscript preparation more extensively than recommendations concerning editorial policy and research integrity (Ht = 15.91, P = 0.003). Some policies were poorly described (portion of positive answers), for example: procedure for author's appeal (0.04), editorial submissions (0.08), appointed body for research integrity issues (0.08). The IF of the "Medical Laboratory Technology" journals does not reflect a journals' compliance to uniform standards. There is a need for improving editorial policies and the policies on research integrity.

  12. Oak Ridge National Laboratory Technology Logic Diagram. Volume 2, Technology Logic Diagram: Part B, Remedial Action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Part A of Vols. 1. and 2 focuses on D&D. Part B of Vols. 1 and 2 focuses on the RA of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B, and C) contains the TLD data sheets. Remedial action is the focus of Vol. 2, Pt. B, which has been divided into the three necessary subelements of the RA: characterization, RA, and robotics and automation. Each of these sections address general ORNL problems, which are then broken down by problem area/constituents and linked to potential remedial technologies. The diagrams also contain summary information about a technology`s status, its science and technology needs, and its implementation needs.

  13. Surface texture and hardness of dental alloys processed by alternative technologies

    Science.gov (United States)

    Porojan, Liliana; Savencu, Cristina E.; Topală, Florin I.; Porojan, Sorin D.

    2017-08-01

    Technological developments have led to the implementation of novel digitalized manufacturing methods for the production of metallic structures in prosthetic dentistry. These technologies can be classified as based on subtractive manufacturing, assisted by computer-aided design/computer-aided manufacturing (CAD/CAM) systems, or on additive manufacturing (AM), such as the recently developed laser-based methods. The aim of the study was to assess the surface texture and hardness of metallic structures for dental restorations obtained by alternative technologies: conventional casting (CST), computerized milling (MIL), AM power bed fusion methods, respective selective laser melting (SLM) and selective laser sintering (SLS). For the experimental analyses metallic specimens made of Co-Cr dental alloys were prepared as indicated by the manufacturers. The specimen structure at the macro level was observed by an optical microscope and micro-hardness was measured in all substrates. Metallic frameworks obtained by AM are characterized by increased hardness, depending also on the surface processing. The formation of microstructural defects can be better controlled and avoided during SLM and MIL process. Application of power bed fusion techniques, like SLS and SLM, is currently a challenge in dental alloys processing.

  14. E-learning and the future of dental education: opinions of administrators and information technology specialists.

    Science.gov (United States)

    Hillenburg, K L; Cederberg, R A; Gray, S A; Hurst, C L; Johnson, G K; Potter, B J

    2006-08-01

    The digital revolution and growth of the Internet have led to many innovations in the area of electronic learning (e-learning). To survive and prosper, educators must be prepared to respond creatively to these changes. Administrators and information technology specialists at six dental schools and their parent institutions were interviewed regarding their opinions of the impact that e-learning will have on the future of dental education. Interview questions encompassed vision, rate of change, challenges, role of faculty, resources, enrolment, collaboration, responsibility for course design and content, mission and fate of the institution. The objective of this qualitative study was to sample the opinions of educational administrators and information technology specialists from selected US universities regarding the impact of e-learning on dental education to detect trends in their attitudes. Responses to the survey indicated disagreement between administrators and informational technology specialists regarding the rate of change, generation of resources, impact on enrolment, responsibility for course design and content, mission and fate of the university. General agreement was noted with regard to vision, challenges, role of faculty and need for collaboration.

  15. Laboratory 3.0: Manufacturing technologies laboratory virtualization with a student-centred methodology

    Directory of Open Access Journals (Sweden)

    Albert Fabregat-Sanjuan

    2017-06-01

    Full Text Available This paper presents a blended-learning strategy for improving the teaching method applied in the laboratory subject Manufacturing Technologies. The teaching method has been changed from a predominantly teacher-centred to an active learning system with a student-centred focus and e-learning activities. In face-to-face classes, a game-based learning platform has been used. This methodology ensured engaging classes at the same time that provided a useful live feedback for students and teachers. The virtualization of the laboratory was achieved by two different e-learning activities, self-assessment tasks and video clips. These e-learning tools have been used not only to improve the students’ learning but also to enhance their motivation. The results from academic outputs show a significant improvement after the new blended learning method is applied. Moreover, a student satisfaction survey shows the positive impact of the methodology on the students’ engagement and motivation.

  16. HYDROGEN TECHNOLOGY RESEARCH AT THE SAVANNAH RIVER NATIONAL LABORATORY

    Energy Technology Data Exchange (ETDEWEB)

    Danko, E

    2009-03-02

    The Savannah River National Laboratory (SRNL) is a U.S. Department of Energy research and development laboratory located at the Savannah River Site (SRS) near Aiken, South Carolina. SRNL has over 50 years of experience in developing and applying hydrogen technology, both through its national defense activities as well as through its recent activities with the DOE Hydrogen Programs. The hydrogen technical staff at SRNL comprises over 90 scientists, engineers and technologists, and it is believed to be the largest such staff in the U.S. SRNL has ongoing R&D initiatives in a variety of hydrogen storage areas, including metal hydrides, complex hydrides, chemical hydrides and carbon nanotubes. SRNL has over 25 years of experience in metal hydrides and solid-state hydrogen storage research, development and demonstration. As part of its defense mission at SRS, SRNL developed, designed, demonstrated and provides ongoing technical support for the largest hydrogen processing facility in the world based on the integrated use of metal hydrides for hydrogen storage, separation, and compression. The SRNL has been active in teaming with academic and industrial partners to advance hydrogen technology. A primary focus of SRNL's R&D has been hydrogen storage using metal and complex hydrides. SRNL and its Hydrogen Technology Research Laboratory have been very successful in leveraging their defense infrastructure, capabilities and investments to help solve this country's energy problems. SRNL has participated in projects to convert public transit and utility vehicles for operation using hydrogen fuel. Two major projects include the H2Fuel Bus and an Industrial Fuel Cell Vehicle (IFCV) also known as the GATOR{trademark}. Both of these projects were funded by DOE and cost shared by industry. These are discussed further in Section 3.0, Demonstration Projects. In addition to metal hydrides technology, the SRNL Hydrogen group has done extensive R&D in other hydrogen technologies

  17. 75 FR 81592 - National Energy Technology Laboratory; Notice of Intent To Grant Exclusive License

    Science.gov (United States)

    2010-12-28

    ... National Energy Technology Laboratory; Notice of Intent To Grant Exclusive License AGENCY: National Energy Technology Laboratory, Department of Energy. ACTION: Notice of Intent To Grant Exclusive License. SUMMARY.... Department of Energy, National Energy Technology Laboratory, P.O. Box 10940, Pittsburgh, PA 15236;...

  18. 77 FR 68752 - Notice of Intent To Grant Exclusive License Between National Energy Technology Laboratory and...

    Science.gov (United States)

    2012-11-16

    ... of Intent To Grant Exclusive License Between National Energy Technology Laboratory and Corrosion Solutions AGENCY: National Energy Technology Laboratory, Department of Energy. ACTION: Notice of Intent To... CFR 404.7(a)(1)(i). The National Energy Technology Laboratory (NETL) hereby gives notice of its...

  19. TESTING OF THE RADBALL TECHNOLOGY AT SAVANNAH RIVER NATIONAL LABORATORY

    Energy Technology Data Exchange (ETDEWEB)

    Farfan, E.; Foley, T.

    2010-02-10

    The United Kingdom's National Nuclear Laboratory (NNL) has developed a remote, nonelectrical, radiation-mapping device known as RadBall (patent pending), which offers a means to locate and quantify radiation hazards and sources within contaminated areas of the nuclear industry. Positive results from initial deployment trials in nuclear waste reprocessing plants at Sellafield in the United Kingdom and the anticipated future potential use of RadBall throughout the U.S. Department of Energy Complex have led to the NNL partnering with the Savannah River National Laboratory (SRNL) to further test, underpin, and strengthen the technical performance of the technology. The study completed at SRNL addresses key aspects of the testing of the RadBall technology. The first set of tests was performed at Savannah River Nuclear Solutions Health Physics Instrument Calibration Laboratory (HPICL) using various gamma-ray sources and an x-ray machine with known radiological characteristics. The objective of these preliminary tests was to identify the optimal dose and collimator thickness. The second set of tests involved a highly contaminated hot cell. The objective of this testing was to characterize a hot cell with unknown radiation sources. The RadBall calibration experiments and hot cell deployment were successful in that for each trial radiation tracks were visible. The deployment of RadBall can be accomplished in different ways depending on the size and characteristics of the contaminated area (e.g., a hot cell that already has a crane/manipulator available or highly contaminated room that requires the use of a remote control device with sensor and video equipment to position RadBall). This report also presents SRNL-designed RadBall accessories for future RadBall deployment (a harness, PODS, and robot).

  20. New Dental Materials Reinforced by Carbon Nanotubes: the Technology of Obtaining and the Study of Properties

    Directory of Open Access Journals (Sweden)

    Zaporotskova Irina Vladimirovna

    2014-12-01

    Full Text Available Polymeric materials (plastics are widely used in dentistry for implants and dental fillings. Therefore, the development of new dental materials with improved characteristics, is a very important task. In the last decade special expectations in the field of creation of new materials are associated with the use of unique carbon nanomaterials – carbon nanotubes, which have unique characteristics. That is why they can be used as an effective means of improving strength properties of polymeric materials obtained by the reinforcement of the polymer matrix and carbon nanotubes. The authors propose the technology of creating new dental materials based on the basis of rapid-hardening dental plastic material “Karbodent” by reinforcing carbon nanotubes. The samples of new polymer materials with different percentages of nanotubes were obtained, the results of measurement of their strength characteristics were provided. The mechanism of interaction of the basic components of “Karbodent” and single-wall carbon nanotubes are theoretically studied. The various orientations of the main components of “Karbodent” were analyzed in relation to the surface of carbon nanotubes. A semi empirical quantum chemical MNDO method is the main method of calculation. On the basis of the analysis of theoretical and practical studies, the authors made conclusions about the feasibility of a new dental material using carbon nanotubes with unique strength characteristics. The composites reinforced by carbon nanotubes polymers can be recommended for use not only in the practice of orthodontics, but also in creating high-strength seals. Such polymer systems are useful for creating prosthetic fabrication of orthodontic appliances, temporary prostheses.

  1. Technological capability at the Brazilian official pharmaceutical laboratories

    Directory of Open Access Journals (Sweden)

    José Vitor Bomtempo Martins

    2008-10-01

    Full Text Available This paper studies the technological capability in the Brazilian Official Pharmaceutical Laboratories [OPL]. The technological capability analysis could contribute to organization strategies and governmental actions in order to improve OPL basic tasks as well to incorporate new ones, particularly concerning the innovation management. Inspired in Figueiredo (2000, 2003a, 2003b and Figueiredo and Ariffin (2003, a framework was drawn and adapted to pharmaceutical industry characteristics and current sanitary and health legislation. The framework allows to map different dimensions of the technological capability (installations, processes, products, equipments, organizational capability and knowledge management and the level attained by OPL (ordinary or innovating capability. OPL show a good development of ordinary capabilities, particularly in Product and Processes. Concerning the other dimensions, OPL are quite diverse. In general, innovating capabilities are not much developed. In the short term, it was identified a dispersion in the capacitating efforts. Considering their present level and the absorption efforts, good perspectives can be found in Installations, Processes and Organizational Capability. A lower level of efforts in Products and Knowledge Management could undermine these capabilities in the future.

  2. The role of peer assisted learning to improve the effectivity of clinical skill laboratory learning in dental education

    Directory of Open Access Journals (Sweden)

    Agus Ardinansyah

    2016-06-01

    Full Text Available Nowadays, the clinical skill learning in dental education has begun in pre-clinic, known as Clinical Skill Laboratory (CSL which needs human resources, many and expensive tools and manikins, and enough times for practise. One of the method used in CSL in dental education is PeerAssisted Learning (PAL defined as “the development of knowledge and skill through active help and support among status equals or match companions”. This paper aims is to explain the role of PAL method to improve the effectivity of CSL learning in dental education in preclinical stage. Reviewing on the relevant literatures regarding peer assisted learning on the implementation of the clinical skill laboratory in dental education. The effectivity of CSL learning needs close supervision and individual feedback, so enough tutors is important through the process. This PAL method considered to be helpfull with the increasing numbers of dental students and the limitation of staff faculty. This method is found feasible, well accepted by peer-tutors and students, and can be as effective as conventional learning method. This is also useful for peer-teacher because they more intrinsically motivated, have higher conceptual learning scores, and perceive themselves to be more actively engaged with the environment than students who learn in order to be tested.  However, there are several limitation of this method. The contact time between students and medical doctors may decrease significantlyand it does not seem to be generally qualified to transfer such complex procedures.It also needs peer-teachers training and a detailed manual. Questions concerning the cost-effectiveness and profitability of student tutor-guided technical skills training may thus arise. But one institution that implemented this method states that the majority of their tutors decided to continue their teaching activity in the skills lab and that these experienced tutors, in addition to established faculty staff

  3. Avanços tecnológicos em hematologia laboratorial Technological advances in laboratorial haematology

    Directory of Open Access Journals (Sweden)

    Paulo C. Naoum

    2001-08-01

    Full Text Available O recente avanço científico e tecnológico direcionado à identificação imuno-hematológica de produtos celulares (ex.: citocinas, interleucinas, interferons, entre outros sintetizados por determinadas células sanguíneas, bem como na identificação de antígenos de membrana de leucócitos e células progenitoras hematopoiéticas, promoveram excepcional desenvolvimento no diagnóstico laboratorial de diversas doenças hematológicas. Somam-se a esse fato as aplicações das técnicas de biologia molecular que se tornam cada vez mais instrumentos laboratoriais de grande definição no diagnóstico e na prevenção de doenças hematológicas, notadamente aquelas de origem hereditária. O presente artigo teve o objetivo de expor as principais aplicações de novas tecnologias que deverão ser adotadas rapidamente pela moderna hematologia laboratorial, bem como a de sensibilizar os profissionais hematologistas, clínicos e laboratoriais, para a necessidade de se atualizarem numa nova ciência, a dos produtos celulares.Recent progress towards the identification of products synthesised by some blood cells (ex.: cytokines, interleukins, interferons, etc as well as the identification of white blood cell and stem cell membrane antigens, has aided the exceptional development of laboratory diagnostics of several haematological diseases. In addition to this there has been a great development in the use of molecular biology techniques which have become instrumentals of high definition in the diagnosis and prevention of haematological diseases, specifically those of hereditary origin. This article has the aim of disclosing the main applications of the new technologies that will soon be used widely in laboratory haematology.

  4. Laboratory evaluation of several nanofilled dental resin composites: mechanical and chemical properties

    OpenAIRE

    Scotti, Nicola

    2015-01-01

    The present thesis focused on nanofilled dental resins. The first year activity focused on depth of cure analysis of nanofilled composites. The second year activity focused on hardness, depth of cure and shrinkage stress analysis of bulk fill resin composites. The third year focused on degree of conversion and hardness of nanofilled resin cements. 2013/2014

  5. Laboratory evaluation of several nanofilled dental resin composites: mechanical and chemical properties

    OpenAIRE

    Scotti, Nicola

    2015-01-01

    The present thesis focused on nanofilled dental resins. The first year activity focused on depth of cure analysis of nanofilled composites. The second year activity focused on hardness, depth of cure and shrinkage stress analysis of bulk fill resin composites. The third year focused on degree of conversion and hardness of nanofilled resin cements. 2013/2014

  6. Simulation Technology Laboratory Building 970 hazards assessment document

    Energy Technology Data Exchange (ETDEWEB)

    Wood, C.L.; Starr, M.D.

    1994-11-01

    The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Simulation Technology Laboratory, Building 970. The entire inventory was screened according to the potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distances at which a postulated facility event will produce consequences exceeding the ERPG-2 and Early Severe Health Effects thresholds are 78 and 46 meters, respectively. The highest emergency classification is a Site Area Emergency. The Emergency Planning Zone is 100 meters.

  7. Health Technology Assessment Fireside: Antibiotic Prophylaxis and Dental Treatment in Canada

    Directory of Open Access Journals (Sweden)

    Mario A. Brondani

    2013-01-01

    Full Text Available Objectives. This paper discusses the controversies surrounding the antibiotic prophylaxis preceding dental interventions within the following research question: how effective is dental antibiotic prophylaxis in preventing comorbidity and complications in those at risk? Methods. A synthesis of the available literature regarding antibiotic prophylaxis in dentistry was conducted under the lenses of Kazanjian’s framework for health technology assessment with a focus on economic concerns, population impact, social context, population at risk, and the effectiveness of the evidence to support its use. Results. The papers reviewed show that we have been using antibiotic prophylaxis without a clear and full understanding of its benefits. Although the first guideline for antibiotic prophylaxis was introduced in 1990, it has been revised on several occasions, from 1991 to 2011. Evidence-based clinical guidelines are yet to be seen. Conclusions. Any perceived potential benefit from administering antibiotic prophylaxis before dental procedures must be weighed against the known risks of lethal toxicity, allergy, and development, selection, and transmission of microbial resistance. The implications of guideline changes and lack of evidence for the full use of antibiotic prophylaxis for the teaching of dentistry have to be further discussed.

  8. Advanced robotic technologies for transfer at Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, P.C.

    1994-10-01

    Hazardous operations which have in the past been completed by technicians are under increased scrutiny due to high costs and low productivity associated with providing protective clothing and environments. As a result, remote systems are needed to accomplish many hazardous materials handling tasks such as the clean-up of waste sites in which the exposure of personnel to radiation, chemical, explosive and other hazardous constituents is unacceptable. Computer models augmented by sensing, and structured, modular computing environments are proving effective in automating many unstructured hazardous tasks. Work at Sandia National Laboratories (SNL) has focused on applying flexible automation (robotics) to meet the needs of the U.S. Department of Energy (USDOE). Dismantling facilities, environmental remediation, and materials handling in changing, hazardous environments lead to many technical challenges. Computer planning, monitoring and operator assistance shorten training cycles, reduce errors, and speed execution of operations. Robotic systems that re-use well-understood generic technologies can be much better characterized than robotic systems developed for a particular application, leading to a more reliable and safer systems. Further safety in robotic operations results from use of environmental sensors and knowledge of the task and environment. Collision detection and avoidance is achieved from such sensor integration and model-based control. This paper discusses selected technologies developed at SNL for use within the USDOE complex that have been or are ready for transfer to government and industrial suppliers. These technologies include sensors, sub-systems, and the design philosophy applied to quickly integrate them into a working robotic system. This paper represents the work of many people at the Intelligent Systems and Robotics Center at SNL, to whom the credit belongs.

  9. A New Technology of Microcrystallizing Leucite to Reinforce Dental Glass Ceramics

    Institute of Scientific and Technical Information of China (English)

    ZHANG Biao; PENG Bin; DUAN Xing-long; QIAN Fa-tang; WU Bo-lin

    2004-01-01

    The key technology and the main mechanism of microcrystallizing leucite to reirforce dentalglass ceramics were investigated. The feedstock powders were selected, mixed according to the ratios of the theoreti-cal composition of leucite, ball - milled, melted at 1600℃ and then cooled to room temperature quickly. Thecooled clinkers were ball - milled again to 4 μm. After cold - isostatic pressure molded and air sintered at 1 500℃for 1 h, the dental glass ceramics were fabricated. They have following characteristics: excellent mechanical prop-erties ( mean compressive strength is 206.6 MPa ), low sintering temperature and good reoccurrence to keep steadyquality.

  10. A MODEL FOR INTEGRATED SOFTWARE TO IMPROVE COMMUNICATION POLICY IN DENTAL TECHNICAL LABS

    Directory of Open Access Journals (Sweden)

    Minko M. Milev

    2017-06-01

    Full Text Available Introduction: Integrated marketing communications (IMC are all kinds of communications between organisations and customers, partners, other organisations and society. Aim: To develop and present an integrated software model, which can improve the effectiveness of communications in dental technical services. Material and Methods: The model of integrated software is based on recommendations of a total of 700 respondents (students of dental technology, dental physicians, dental technicians and patients of dental technical laboratories in Northeastern Bulgaria. Results and Discussion: We present the benefits of future integrated software to improve the communication policy in the dental technical laboratory that meets the needs of fast cooperation and well-built communicative network between dental physicians, dental technicians, patients and students. Conclusion: The use of integrated communications could be a powerful unified approach to improving the communication policy between all players at the market of dental technical services.

  11. Use of information and communication technology among dental students at the University of Jordan.

    Science.gov (United States)

    Rajab, Lamis D; Baqain, Zaid H

    2005-03-01

    The aim of this study was to investigate the current knowledge, skills, and opinions of undergraduate dental students at the University of Jordan with respect to information communication technology (ICT). Dental students from the second, third, fourth, and fifth years were asked to complete a questionnaire presented in a lecture at the end of the second semester in the 2002-03 academic year. The response rate was 81 percent. Besides free and unlimited access to computers at the school of dentistry, 74 percent of the students had access to computers at home. However, 44 percent did not use a computer regularly. Male students were more regular and longer users of computers than females (pinformation technology (IT) skills. More males felt competent in basic IT skills than did females (psources other than at the university. The main educational use of computers was accessing the Internet, word processing, multimedia, presentations, Medline search, and data management. More clinical students felt competent in word-processing skills (pinformation obtained from the Internet. Most students (90 percent) used email. Most students (83 percent) supported the idea of placing lectures on the web, and 61.2 percent indicated that this would not influence lecture attendance. Students used the Internet more for personal reasons than for the study of dentistry. More clinical students used the Internet for dentistry than preclinical students (pICT among Jordanian students remains low.

  12. Prediction of practical performance in preclinical laboratory courses – the return of wire bending for admission of dental students in Hamburg

    Directory of Open Access Journals (Sweden)

    Kothe, Christian

    2014-05-01

    Full Text Available [english] Although some recent studies concluded that dexterity is not a reliable predictor of performance in preclinical laboratory courses in dentistry, they could not disprove earlier findings which confirmed the worth of manual dexterity tests in dental admission. We developed a wire bending test (HAM-Man which was administered during dental freshmen’s first week in 2008, 2009, and 2010. The purpose of our study was to evaluate if the HAM-Man is a useful selection criterion additional to the high school grade point average (GPA in dental admission. Regression analysis revealed that GPA only accounted for a maximum of 9% of students’ performance in preclinical laboratory courses, in six out of eight models the explained variance was below 2%. The HAM-Man incrementally explained up to 20.5% of preclinical practical performance over GPA. In line with findings from earlier studies the HAM-Man test of manual dexterity showed satisfactory incremental validity. While GPA has a focus on cognitive abilities, the HAM-Man reflects learning of unfamiliar psychomotor skills, spatial relationships, and dental techniques needed in preclinical laboratory courses. The wire bending test HAM-Man is a valuable additional selection instrument for applicants of dental schools.

  13. Thermal treatment technology at the Idaho National Engineering Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Hillary, J.M. [EG and G Idaho Inc., Idaho Falls, ID (United States)

    1994-12-31

    Recent surveys of mixed wastes in interim storage throughout the 30-site Department of Energy complex indicate that only 12 of those sites account for 98% of such wastes by volume. Current inventories at the Idaho National Engineering Laboratory (INEL) account for 38% of total DOE wastes in interim storage, the largest of any single site. For a large percentage of these waste volumes, as well as the substantial amounts of buried and currently generated wastes, thermal treatment processes have been designated as the technologies of choice. Current facilities and a number of proposed strategies exist for thermal treatment of wastes of this nature at the INEL. High-level radioactive waste is solidified in the Waste Calciner Facility at the Idaho Central Processing Plant. Low-level solid wastes until recently have been processed at the Waste Experimental Reduction Facility (WERF), a compaction, size reduction, and controlled air incineration facility. WERF is currently undergoing process upgrading and RCRA Part B permitting. Recent systems studies have defined effective strategies, in the form of thermal process sequences, for treatment of wastes of the complex and heterogeneous nature in the INEL inventory. This presentation reviews the current status of operating facilities, active studies in this area, and proposed strategies for thermal treatment of INEL wastes.

  14. Laboratory investigation of Colgate 360 degrees toothbrush and Oral-B indicator toothbrush for the removal of dental stains.

    Science.gov (United States)

    Kleber, Carl J; Kemp, James H; Moore, Michael H; Mintel, Thomas E

    2004-10-01

    The objective of this in vitro study was to evaluate the stain-removal efficacy of a newly designed manual toothbrush, the Colgate 360 degrees, relative to a commercially available toothbrush, the Oral-B Indicator. A modification of Stookey et al was used to evaluate the stain-removal effects of toothbrushes instead of dentifrice on bovine teeth. A V.8 mechanical cross-brushing machine equipped with the test toothbrushes and adjusted to 500g to enamel surfaces evaluated stain removal using a dentifrice slurry and water after 800 double strokes. The overall results of this laboratory investigation indicate that the Colgate 360 degrees toothbrush is more effective, P < .05, than the commercial Oral-B Indicator toothbrush in removing dental stain and brightening teeth using a standard toothpaste or water.

  15. Integration of tablet technologies in the e-laboratory of cytology: a health technology assessment.

    Science.gov (United States)

    Giansanti, Daniele; Pochini, Marco; Giovagnoli, Maria Rosaria

    2014-10-01

    Although tablet systems are becoming a powerful technology, particularly useful in every application of medical imaging, to date no one has investigated the acceptance and performance of this technology in digital cytology. The specific aims of the work were (1) to design a health technology assessment (HTA) tool to assess, in terms of performance and acceptance, the introduction of tablet technologies (wearable, portable, and non portable) in the e-laboratories of cytology and (2) to test the tool in a first significant application of digital cytology. An HTA tool was proposed operating on a domain of five dimensions of investigation comprising the basic information of the product of digital cytology, the perceived subjective quality of images, the assessment of the virtual navigation on the e-slide, the assessment of the information and communication technologies features, and the diagnostic power. Six e-slides regarding studies of cervicovaginal cytology digitalized by means of an Aperio ( www.aperio.com ) scanner and uploaded onto the www.digitalslide.it Web site were used for testing the methodology on three different network connections. Three experts of cytology successfully tested the methodology on seven tablets found suitable for the study in their own standard configuration. Specific indexes furnished by the tool indicated both a high degree of performance and subjective acceptance of the investigated technology. The HTA tool thus could be useful to investigate new tablet technologies in digital cytology and furnish stakeholders with useful information that may help them make decisions involving the healthcare system. From a global point of view the study demonstrates the feasibility of using the tablet technology in digital cytology.

  16. Innovative technology summary report: Road Transportable Analytical Laboratory (RTAL)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The Road Transportable Analytical Laboratory (RTAL) has been used in support of US Department of Energy (DOE) site and waste characterization and remediation planning at Fernald Environmental Management Project (FEMP) and is being considered for implementation at other DOE sites, including the Paducah Gaseous Diffusion Plant. The RTAL laboratory system consists of a set of individual laboratory modules deployable independently or as an interconnected group to meet each DOE site`s specific analysis needs. The prototype RTAL, deployed at FEMP Operable Unit 1 Waste Pits, has been designed to be synergistic with existing analytical laboratory capabilities, thereby reducing the occurrence of unplanned rush samples that are disruptive to efficient laboratory operations.

  17. The future of dental devices is digital.

    Science.gov (United States)

    van Noort, Richard

    2012-01-01

    Major changes are taking place in dental laboratories as a result of new digital technologies. Our aim is to provide an overview of these changes. In this article the reader will be introduced to the range of layered fabrication technologies and suggestions are made how these might be used in dentistry. Key publications in English from the past two decades are surveyed. The first digital revolution took place many years ago now with the production of dental restorations such as veneers, inlays, crowns and bridges using dental CAD-CAM systems and new improved systems appear on the market with great rapidity. The reducing cost of processing power will ensure that these developments will continue as exemplified by the recent introduction of a new range of digital intra-oral scanners. With regard to the manufacture of prostheses this is currently dominated by subtractive machining technology but it is inevitable that the additive processing routes of layered fabrication, such as FDM, SLA, SLM and inkjet printing, will start to have an impact. In principle there is no reason why the technology cannot be extended to all aspects of production of dental prostheses and include customized implants, full denture construction and orthodontic appliances. In fact anything that you might expect a dental laboratory to produce can be done digitally and potentially more consistently, quicker and at a reduced cost. Dental device manufacturing will experience a second revolution when layered fabrication techniques reach the point of being able to produce high quality dental prostheses. The challenge for the dental materials research community is to marry the technology with materials that are suitable for use in dentistry. This can potentially take dental materials research in a totally different direction. Copyright © 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  18. Robotic Lunar Rover Technologies and SEI Supporting Technologies at Sandia National Laboratories

    Science.gov (United States)

    Klarer, Paul R.

    1992-01-01

    Existing robotic rover technologies at Sandia National Laboratories (SNL) can be applied toward the realization of a robotic lunar rover mission in the near term. Recent activities at the SNL-RVR have demonstrated the utility of existing rover technologies for performing remote field geology tasks similar to those envisioned on a robotic lunar rover mission. Specific technologies demonstrated include low-data-rate teleoperation, multivehicle control, remote site and sample inspection, standard bandwidth stereo vision, and autonomous path following based on both internal dead reckoning and an external position location update system. These activities serve to support the use of robotic rovers for an early return to the lunar surface by demonstrating capabilities that are attainable with off-the-shelf technology and existing control techniques. The breadth of technical activities at SNL provides many supporting technology areas for robotic rover development. These range from core competency areas and microsensor fabrication facilities, to actual space qualification of flight components that are designed and fabricated in-house.

  19. Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part A, Decontamination and Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Strategic Roadmap for the Oak Ridge Reservation is a generalized planning document that identifies broad categories of issues that keep ORNL outside full compliance with the law and other legally binding agreements. Possible generic paths to compliance, issues, and the schedule for resolution of the issues one identified. The role of the Oak Ridge National Laboratory Technology Logic Diagram (TLD) is then to identify specific site issues (problems), identify specific technologies that can be brought to bear on the issues, and assess the current status and readiness of these remediation technologies within the constraints of the schedule commitment. Regulatory requirements and commitments contained in the Strategic Roadmap for the Oak Ridge Reservation are also included in the TLD as constraints to the application of immature technological solutions. Some otherwise attractive technological solutions may not be employed because they may not be deployable on the schedule enumerated in the regulatory agreements. The roadmap for ORNL includes a list of 46 comprehensive logic diagrams for WM of low-level, radioactive-mixed, hazardous, sanitary and industrial. and TRU waste. The roadmapping process gives comparisons of the installation as it exists to the way the installation should exist under full compliance. The identification of the issues is the goal of roadmapping. This allows accurate and timely formulation of activities.

  20. The influence of framework design on the load-bearing capacity of laboratory-made inlay-retained fibre-reinforced composite fixed dental prostheses

    NARCIS (Netherlands)

    F. Keulemans; L.V.J. Lassilla; S. Garoushi; P.K. Vallittu; C.J. Kleverlaan; A.J. Feilzer

    2009-01-01

    Delamination of the veneering composite is frequently encountered with fibre-reinforced composite (FRC) fixed dental prosthesis (FDPs). The aim of this study is to evaluate the influence of framework design on the load-bearing capacity of laboratory-made three-unit inlay-retained FRC-FDPs. Inlay-ret

  1. Review and Identification of DOE Laboratory Technologies for Countermine/Unexploded Ordnance Detection

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C.M.

    2002-04-03

    Several Department of Energy (DOE) laboratories have worked and/or are working on technologies that are applicable to the detection of landmines and/or unexploded ordnance. This report is a compilation of technical summaries for many of these technologies. For additional information on any technology, appropriate points of contact are provided for each technology.

  2. The awareness and attitudes of students of one indian dental school toward information technology and its use to improve patient care.

    Science.gov (United States)

    Jathanna, Vinod R; Jathanna, Ramya V; Jathanna, Roopalekha

    2014-01-01

    Many obstacles need to be overcome if digital and electronic technologies are to be fully integrated in the operation of dental clinics in some countries. These obstacles may be physical, technical, or psychosocial barriers in the form of perceptions and attitudes related to software incompatibilities, patient privacy, and interference with the patient-practitioner relationship. The objectives of the study are to assess the perceptions of Indian dental students of one school toward the usefulness of digital technologies in improving dental practice; their willingness to use digital and electronic technologies; the perceived obstacles to the use of digital and electronic technologies in dental care setups; and their attitudes toward Internet privacy issues. The study population consisted of 186 final year undergraduate dental students from the A. B. Shetty Memorial institute of Dental Sciences, Rajiv Gandhi University of Health Sciences, Mangalore, India. Survey data were analyzed descriptively . Most students indicated that information technology enhances patient satisfaction, the quality of dental record, diagnosis, treatment planning, and doctor-doctor communication. Cost of equipment and need for technical training were regarded as major obstacles by substantial proportions of respondents. Most dental students at our school feel that the information technology will support their decision making in diagnoses and devising effective treatment plans, which in turn increase patient satisfaction and quality of care. Students also perceived that lack of technical knowledge and the high cost of implementation are major barriers to developing information technology in India.

  3. Dental Hygienist.

    Science.gov (United States)

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of dental hygienist, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general and 9 units specific to the occupation of dental hygienist. The following skill areas are covered in…

  4. Evaluation of occlusal rest seats with 3D technology in dental education.

    Science.gov (United States)

    Sampaio-Fernandes, Manuel António Ferreira; Sampaio-Fernandes, Maria M; Fonseca, Patrícia A; Almeida, Paulo R; Reis-Campos, José C; Figueiral, Maria H

    2015-02-01

    The preparation of rest seats must comply with specific sizes and shapes. Various technological systems such as Kavo PrepAssistant have been used as an auxiliary method to evaluate preclinical preparations more objectively. The aims of this study were to establish an alternative system for evaluating occlusal rest seats and to compare different types of assessment. Seventy-six undergraduate students at Oporto University Faculty of Dental Medicine in Portugal were selected as a convenience sample to prepare two occlusal rest seats in Kavo teeth #45 and #46 (FDI World Dental Federation ISO-3950) and were randomly assigned to two groups. Bearing in mind the ideal characteristics of rest seats, the investigators defined ten assessment parameters, and their evaluation weights were independently estimated by three evaluators. Four of these parameters were measured in Kavo PrepAssistant. The results of the different evaluation methods and evaluators varied considerably. The classical evaluation presented final results worse than those of the evaluations using parameters. In this study, carrying out the assessment with Kavo PrepAssistant helped to achieve a more objective and less evaluator-dependent final evaluation.

  5. Designing a novel dental root analogue implant using cone beam computed tomography and CAD/CAM technology

    NARCIS (Netherlands)

    Moin, D.A.; Hassan, B.; Mercelis, P.; Wismeijer, D.

    2013-01-01

    Objectives The study aim is to introduce a novel preemptively constructed dental root analogue implant (RAI) based on three-dimensional (3D) root surface models obtained from a cone beam computed tomography (CBCT) scan, computer aided designing and computer aided manufacturing technology. Materials

  6. Properties and Clinical Application of Three Types of Dental Glass-Ceramics and Ceramics for CAD-CAM Technologies

    Science.gov (United States)

    Ritzberger, Christian; Apel, Elke; Höland, Wolfram; Peschke, Arnd; Rheinberger, Volker M.

    2010-01-01

    The main properties (mechanical, thermal and chemical) and clinical application for dental restoration are demonstrated for three types of glass-ceramics and sintered polycrystalline ceramic produced by Ivoclar Vivadent AG. Two types of glass-ceramics are derived from the leucite-type and the lithium disilicate-type. The third type of dental materials represents a ZrO2 ceramic. CAD/CAM technology is a procedure to manufacture dental ceramic restoration. Leucite-type glass-ceramics demonstrate high translucency, preferable optical/mechanical properties and an application as dental inlays, onlays and crowns. Based on an improvement of the mechanical parameters, specially the strength and toughness, the lithium disilicate glass-ceramics are used as crowns; applying a procedure to machine an intermediate product and producing the final glass-ceramic by an additional heat treatment. Small dental bridges of lithium disilicate glass-ceramic were fabricated using a molding technology. ZrO2 ceramics show high toughness and strength and were veneered with fluoroapatite glass-ceramic. Machining is possible with a porous intermediate product.

  7. Laboratories for the 21st Century: Case Studies; National Renewable Energy Laboratory, Science and Technology Facility, Golden, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    2007-03-01

    This publication is one in series of case studies for "Laboratories for the 21st Century," a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy Federal Energy Management Program. It is intended for those who plan to design and construct public and private-sector laboratory buildings. This case study describes the Science and Technology Facility, a new laboratory at NREL that incorporated energy-efficient and sustainable design features including underfloor air distribution in offices, daylighting, and process cooling.

  8. THE EMPLOYMENT OF COMPUTER TECHNOLOGIES IN LABORATORY COURSE ON PHYSICS

    Directory of Open Access Journals (Sweden)

    Liudmyla M. Nakonechna

    2010-08-01

    Full Text Available Present paper considers the questions on development of conceptually new virtual physical laboratory, the employment of which into secondary education schools will allow to check the theoretical knowledge of students before laboratory work and to acquire the modern methods and skills of experiment.

  9. Secondary calibration laboratory for ionizing radiation laboratory accreitation program National Institute of Standards and Technology National Voluntary Laboratory Accreditation Program

    Energy Technology Data Exchange (ETDEWEB)

    Martin, P.R.

    1993-12-31

    This paper presents an overview of the procedures and requirements for accreditation under the Secondary Calibration Laboratory for Ionizing Radiation Program (SCLIR LAP). The requirements for a quality system, proficiency testing and the onsite assessment are discussed. The purpose of the accreditation program is to establish a network of secondary calibration laboratories that can provide calibrations traceable to the primary national standards.

  10. Science teachers' perceptions of the effectiveness of technology in the laboratories: Implications for science education leadership

    Science.gov (United States)

    Yaseen, Niveen K.

    2011-12-01

    The purpose of this study was to identify science teachers' perceptions concerning the use of technology in science laboratories and identify teachers' concerns and recommendations for improving students' learning. Survey methodology with electronic delivery was used to gather data from 164 science teachers representing Texas public schools. The data confirmed that weaknesses identified in the 1990s still exist. Lack of equipment, classroom space, and technology access, as well as large numbers of students, were reported as major barriers to the implementation of technology in science laboratories. Significant differences were found based on gender, grade level, certification type, years of experience, and technology proficiency. Females, elementary teachers, traditionally trained teachers, and less experienced teachers revealed a more positive attitude toward the use of technology in science laboratories. Participants in this study preferred using science software simulations to support rather than replace traditional science laboratories. Teachers in this study recommended professional development programs that focused on strategies for a technology integrated classroom.

  11. Energy and Technology Review, July 1984: state of the Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    Each year, Director Roger Batzel addresses the LLNL staff on the state of the Laboratory and the achievements of the past year. On May 17, 1984, Dr. Batzel reported on the estimated budget for fiscal year 1985, which includes an 8.5% increase in operating funds, and on recent progress in our major programs. In this issue, we summarize Dr. Batzel's address and present a sampling of Laboratory achievements.

  12. Department of Defense Laboratories: Finding a Future in Technology Transfer

    Science.gov (United States)

    1993-04-01

    investment. There is no mention of DoD even trying. This, then, presents a problem for Defense technology transfer management. The President expects both...effort, but nonetheless felt unable to express their effort quantitatively. The potential size and demand for Defense technology transfer calls for some... Defense technology transfer is taking place, it is doing so on the enthusiasm and drive of a few key individuals. Political demand and legislation

  13. Commercialization of Los Alamos National Laboratory technologies via small businesses. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Brice, R.; Carton, D.; Rhyne, T. [and others

    1997-06-01

    Appendices are presented from a study performed on a concept model system for the commercialization of Los Alamos National Laboratory technologies via small businesses. Topics include a summary of information from the joint MCC/Los Alamos technology conference; a comparison of New Mexico infrastructure to other areas; a typical licensing agreement; technology screening guides; summaries of specific DOE/UC/Los Alamos documents; a bibliography; the Oak Ridge National Laboratory TCRD; The Ames Center for Advanced Technology Development; Los Alamos licensing procedures; presentation of slides from monthly MCC/Los Alamos review meetings; generalized entrepreneurship model; and a discussion on receiving equity for technology.

  14. UniMAP e-Lab for Electrical Engineering Technology: Future Online Laboratory Classes

    Directory of Open Access Journals (Sweden)

    Daud Mohd Hisam

    2016-01-01

    Full Text Available This paper will describe a proposed design and approaches to the future provision of laboratory experience using communication and control technology. This approach provides broad access for students who can not attend conventional laboratory to laboratory work. The experimental system online (e-Lab is under development for the students to carry out various experiments in engineering and technology education assessment system. In the field of engineering technology, one important element is laboratory work, although there are limitations in terms of space laboratories, distance learning provision. UniMAP e-Lab project aims to address many of the existing constraints. Beyond the educational goals, UniMAP e-Lab system enables experimental knowledge in a particular field of engineering technology and experimental results of the research are disseminated and exploited effectively. Solution design of hardware and software as well as the characteristics of education discussed.

  15. Development and Implications of Technology in Reform-Based Physics Laboratories

    Science.gov (United States)

    Chen, Sufen; Lo, Hao-Chang; Lin, Jing-Wen; Liang, Jyh-Chong; Chang, Hsin-Yi; Hwang, Fu-Kwun; Chiou, Guo-Li; Wu, Ying-Tien; Lee, Silvia Wen-Yu; Wu, Hsin-Kai; Wang, Chia-Yu; Tsai, Chin-Chung

    2012-01-01

    Technology has been widely involved in science research. Researchers are now applying it to science education in an attempt to bring students' science activities closer to authentic science activities. The present study synthesizes the research to discuss the development of technology-enhanced laboratories and how technology may contribute to…

  16. Microscale chemistry technology exchange at Argonne National Laboratory - east.

    Energy Technology Data Exchange (ETDEWEB)

    Pausma, R.

    1998-06-04

    The Division of Educational Programs (DEP) at Argonne National Laboratory-East interacts with the education community at all levels to improve science and mathematics education and to provide resources to instructors of science and mathematics. DEP conducts a wide range of educational programs and has established an enormous audience of teachers, both in the Chicago area and nationally. DEP has brought microscale chemistry to the attention of this huge audience. This effort has been supported by the U.S. Department of Energy through the Environmental Management Operations organization within Argonne. Microscale chemistry is a teaching methodology wherein laboratory chemistry training is provided to students while utilizing very small amounts of reagents and correspondingly small apparatus. The techniques enable a school to reduce significantly the cost of reagents, the cost of waste disposal and the dangers associated with the manipulation of chemicals. The cost reductions are achieved while still providing the students with the hands-on laboratory experience that is vital to students who might choose to pursue careers in the sciences. Many universities and colleges have already begun to switch from macroscale to microscale chemistry in their educational laboratories. The introduction of these techniques at the secondary education level will lead to freshman being better prepared for the type of experimentation that they will encounter in college.

  17. Air Force Laboratory’s 2005 Technology Milestones

    Science.gov (United States)

    2006-01-01

    as well as advanced high-power cooling technology demonstrations required for high-power microwave anode. Background AFRL researches, develops... germination period has not prevented physicists, chemists, biologists, and doctors from quickly embracing the technology. Payoff AFRL sponsored Dr. James...electromagnetic waves, THz frequencies are located between microwaves and infrared frequencies. THz frequencies are 100 to 1,000 times lower in frequency than

  18. The Commercialization of New Technologies Transfer from Laboratory to Firm.

    Science.gov (United States)

    1983-05-09

    immediate market introduction . A gap exists, which is a measure of technology maturity, that reflects the amount of additional research and development the...as successful commercialization. A failure occurs when a 15 potential innovation does not reach the point of market introduction for any reason. THE...ready for immediate * market introduction . A gap exists, which is a measure of technology maturity, that reflects the amount of additional

  19. [Tooth color matching systems and communication with dental laboratory in indirect restorations: 2011 update].

    Science.gov (United States)

    Ginzburg, M; Gilboa, I

    2012-01-01

    There has been many technological developments in the last decade. Today's shade-matching technologies have been developed in an effort to increase the success of color matching, communication, reproduction and verification in clinical dentistry and, ultimately, to increase the efficiency of esthetic restorative work within any practice. In general, the output of the color measurements can be classified and specified in several ways. The most common systems for describing color are Munsell's System and the international Commission on Illumination (CIE) L a b color system. Albert Munsell described color as a three-dimensional phenomenon. He described the three dimensions as hue, value (brightness), and chroma (saturation). Visual colour determination by comparison of teeth and shade guides is the most frequently applied method in dentistry. Vitapan Classical (Vita Zahnfabrik, Germany) and its derivations(evidence-based Vitapan 3D-Master shade guide and Linearguide) are the most commonly used shade guides. However, several factors can influence consistency of visual colour selection and specification: individual colour matching ability may vary, the colour perception of any individual may show temporal variation, the range of shades available is inadequate and does not cover the complete colour space of natural teeth, the shade guide tabs are not systematically distributed in their colour space, and changes in lighting conditions can cause alterations in perceived colour. instruments for clinical shade-matching encompass spectrophotometers, colorimeters and digital imaging systems. It can be concluded that different devices have different accuracy and precision. Colorimeters are significantly less reliable than spectrophotometers and digital cameras. Benefits and limitations exist, and the clinician must consider how the technology relates to expectations and needs. Combination of visual colour determination (Vitapan 3D-Master shade guide and Linearguide) with

  20. Evolution of Dental Ceramic from the Platinum Foil to CAD-CAM Technologies: Review

    OpenAIRE

    Isgrò G; Sachs A.

    2015-01-01

    New ceramic materials and novel fabrication methods have been developed and introduced in dentistry with the aim to improve the longevity of dental ceramic restorations and to extent their use for more demanding clinical situations like construction of multi units posterior fixed partial dentures (FPDs). Dental ceramics have now reached a stage of development where it is possible to make long-span metal free posterior FPDs. Dentists and dental technicians should have knowledge&...

  1. Professionalising the asphalt construction process: aligning information technologies, operators' knowledge and laboratory practices

    NARCIS (Netherlands)

    Bijleveld, Frank Roland

    2015-01-01

    This research addresses the need to professionalise the asphalt construction process. A distinctive action research strategy is designed and carried out to progressively improve operational strategies of asphalt teams from technological, human (operator) and laboratory perspectives. Using informatio

  2. 77 FR 69601 - Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects

    Science.gov (United States)

    2012-11-20

    ... of the Secretary Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects AGENCY: Office of the Deputy Assistant Secretary of Defense (Civilian Personnel Policy) (DASD (CPP)), Department of Defense (DoD). ACTION: Notice of proposed amendment to demonstration...

  3. 78 FR 29335 - Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects

    Science.gov (United States)

    2013-05-20

    ... Management, AMRDEC, 5400 Fowler Road, Redstone Arsenal, AL 35898-5000; ERDC: Personnel Demonstration Project... of the Secretary Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects AGENCY: Office of the Deputy Assistant Secretary of Defense (Civilian Personnel...

  4. 78 FR 64204 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2013-10-28

    ... published a notice of approval of a personnel management demonstration project for eligible ONR employees... of the Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration Project, Department of Navy, Office of Naval Research (ONR); Amendment and Corrections AGENCY:...

  5. 76 FR 1923 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2011-01-11

    ... organization's human resources management authorities, policies, and practices must have the flexibility needed... contribution-based compensation system, talent acquisition/retention, and professional human capital planning... Defense Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

  6. Federal Laboratory Consortium Recognizes Unituxin Collaborators with Excellence in Technology Transfer Awards | Poster

    Science.gov (United States)

    The Federal Laboratory Consortium (FLC) presented an Excellence in Technology Transfer award to the group that collaborated to bring Unituxin (dinutuximab, also known as ch14.18), an immunotherapy for neuroblastoma, to licensure.

  7. Federal Laboratory Consortium Recognizes Unituxin Collaborators with Excellence in Technology Transfer Awards | Poster

    Science.gov (United States)

    The Federal Laboratory Consortium (FLC) presented an Excellence in Technology Transfer award to the group that collaborated to bring Unituxin (dinutuximab, also known as ch14.18), an immunotherapy for neuroblastoma, to licensure.

  8. Technology Innovation for the CTBT, the National Laboratory Contribution

    Science.gov (United States)

    Goldstein, W. H.

    2016-12-01

    The Comprehensive Nuclear-Test-Ban Treaty (CTBT) and its Protocol are the result of a long history of scientific engagement and international technical collaboration. The U.S. Department of Energy National Laboratories have been conducting nuclear explosive test-ban research for over 50 years and have made significant contributions to this legacy. Recent examples include the RSTT (regional seismic travel time) computer code and the Smart Sampler—both of these products are the result of collaborations among Livermore, Sandia, Los Alamos, and Pacific Northwest National Laboratories. The RSTT code enables fast and accurate seismic event locations using regional data. This code solves the long-standing problem of using teleseismic and regional seismic data together to locate events. The Smart Sampler is designed for use in On-site Inspections to sample soil gases to look for noble gas fission products from a potential underground nuclear explosive test. The Smart Sampler solves the long-standing problem of collecting soil gases without contaminating the sample with gases from the atmosphere by operating only during atmospheric low-pressure events. Both these products are being evaluated by the Preparatory Commission for the CTBT Organization and the international community. In addition to R&D, the National Laboratories provide experts to support U.S. policy makers in ongoing discussions such as CTBT Working Group B, which sets policy for the development of the CTBT monitoring and verification regime.

  9. Energy and technology review, January--February 1995. State of the laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Bookless, W.A.; Stull, S.; Cassady, C.; Kaiper, G.; Ledbetter, G.; McElroy, L.; Parker, A. [eds.

    1995-02-01

    This issue of Energy and Technology Review highlights the Laboratory`s 1994 accomplishments in their mission areas and core programs--economic competitiveness, national security, lasers, energy, the environment, biology and biotechnology, engineering, physics and space science, chemistry and materials science, computations, and science and math education. LLNL is a major national resource of science and technology expertise, and they are committed to applying this expertise to meet vital national needs.

  10. A Systematic Framework of Virtual Laboratories Using Mobile Agent and Design Pattern Technologies

    Science.gov (United States)

    Li, Yi-Hsung; Dow, Chyi-Ren; Lin, Cheng-Min; Chen, Sheng-Chang; Hsu, Fu-Wei

    2009-01-01

    Innovations in network and information technology have transformed traditional classroom lectures into new approaches that have given universities the opportunity to create a virtual laboratory. However, there is no systematic framework in existing approaches for the development of virtual laboratories. Further, developing a virtual laboratory…

  11. Developments of Spent Nuclear Fuel Pyroprocessing Technology at Idaho National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Michael F. Simpson

    2012-03-01

    This paper summarizes research in used fuel pyroprocessing that has been published by Idaho National Laboratory over the last decade. It includes work done both on treatment of Experimental Breeder Reactor-II and development of advanced technology for potential scale-up and commercialization. Collaborations with universities and other laboratories is included in the cited work.

  12. Fænomenet tandlægeskræk - om videnskab, mennesker og teknologi [The phenomenon of dental fear - on science, people and technology

    DEFF Research Database (Denmark)

    Moore, R.

    1993-01-01

    for 80 odontophobic patients indicated that the majority (46%) had a social phobic reaction in the presence of dental personnel, 35% had complicating general anxiety tendencies and only 19% had a well-defined fear of dental procedures or resultant pain; ie. it was not just fear of drilling, but mostly......Inspite of technological development in dentistry, historically there has always been a new set of instruments or procedures to provide people with symbols of fear (Figs. 2 and 3). The dental consequences of treatment avoidance due to fear are often dramatic (Fig. 4). Diagnosis of the problem...... dental fear adequately and continued to be reduced even after a year at a private dentist of the patients' choosing. Conclusion: The phenomenon of dental fear illustrates that new technological developments in dentistry must be accompanied by improved social and psychological understanding in the future...

  13. Diagnostic laboratory technologies for the fetus and neonate with isoimmunization.

    Science.gov (United States)

    Geaghan, Sharon Markham

    2011-06-01

    Maternal-fetal blood group incompatibility is common but less commonly results in hemolytic disease of the fetus and newborn (HDFN). HDFN is associated with greater peak bilirubin, at an earlier age, and for longer duration than other causes of hyperbilirubinemia. It poses a substantial risk for kernicterus and accounts for the majority of exchange transfusions for hyperbilirubinemia. Advances in diagnosis and management are described, from identification of the alloimmunized pregnancy by maternal ABO and Rh typing, antibody screen (indirect Coombs test), identification and titration; laboratory evaluation of the maternal-fetal unit with a critical maternal antibody titer to prompt fetal antigen status determination; assessment of fetomaternal hemorrhage by conventional Kleihauer-Betke testing or by flow cytometric methodology; to antenatal management of isoimmunization and fetal status assessments using the systems of Liley, Queenan, and serial Doppler fetal middle cerebral artery peak velocity measurements. The utility of laboratory diagnostics in the approach to hemolysis in the neonate, including hematology, chemistry, and peripheral blood smear review, is reviewed. The goal of management, to deliver a healthy infant at or near term, is attained for the majority of cases using current modalities; future directions include noninvasive genotyping of fetal blood from maternal serum to fully eliminate RhD alloimmunization and HDFN; and development of prophylaxis and intervention strategies for non-RhD alloimmunizations for which immune globulin is currently unavailable.

  14. Health Information Technology Systems profoundly impact users: a case study in a dental school.

    Science.gov (United States)

    Hill, Heather K; Stewart, Denice C L; Ash, Joan S

    2010-04-01

    The purpose of this study was to increase our understanding of the impact of Health Information Technology Systems (HITS) on dental school users when the systems are integrated into chair-side patient care. We used qualitative research methods, including interviews, focus groups, and observations, to capture the experiences of HITS users at a single institution. Users included administrators, clinical faculty members, predoctoral students, support staff, and residents. The data were analyzed using a grounded theory approach, and nine themes emerged: 1) HITS benefits were disproportionate among users; 2) communicating about the HITS was challenging; 3) users experienced a range of strong emotions; 4) the instructor persona diminished; 5) there were shifts in the school's power structure; 6) allocation of end-users' time shifted; 7) the training and support needs of end-users were significant; 8) perceived lack of HITS usability made documentation cumbersome for clinicians; and 9) clinicians' workflow was disrupted. HITS integration into patient care impacts the work of all system users, especially end-users. The themes highlight areas of potential concern for implementers and users in integrating a HITS into patient care.

  15. Energy technologies at Sandia National Laboratories: Past, Present, Future

    Energy Technology Data Exchange (ETDEWEB)

    1989-08-01

    We at Sandia first became involved with developing energy technology when the nation initiated its push toward energy independence in the early 1970s. That involvement continues to be strong. In shaping Sandia's energy programs for the 1990s, we will build on our track record from the 70s and 80s, a record outlined in this publication. It contains reprints of three issues of Sandia's Lab News that were devoted to our non-nuclear energy programs. Together, they summarize the history, current activities, and future of Sandia's diverse energy concerns; hence my desire to see them in one volume. Written in the fall of 1988, the articles cover Sandia's extremely broad range of energy technologies -- coal, oil and gas, geothermal, solar thermal, photovoltaics, wind, rechargeable batteries, and combustion.

  16. Hypermedia Laboratory, Defense Applied Information Technology Center; Review for 1988

    Science.gov (United States)

    1988-12-01

    des images. La proliferation des reseatix publics et prives et des services de messagerie oti courrier electronique utilisant de larges bandes et des...technologies tres fiables permer de transporter du texte integral et de proceder a des transferts eLectroniques de documents la oti pour l’instant on...des reseaux de coumrer electronique (comme Infotap et Geomail), et des possibilites de transferts rapides entre collections archivees sur disques et

  17. Technology Being Developed at Lawrence Berkeley National Laboratory: Ultra-Low- Emission Combustion Technologies for Heat and Power Generation

    Science.gov (United States)

    Cheng, Robert K.

    2001-01-01

    The Combustion Technologies Group at Lawrence Berkeley National Laboratory has developed simple, low-cost, yet robust combustion technologies that may change the fundamental design concept of burners for boilers and furnaces, and injectors for gas turbine combustors. The new technologies utilize lean premixed combustion and could bring about significant pollution reductions from commercial and industrial combustion processes and may also improve efficiency. The technologies are spinoffs of two fundamental research projects: An inner-ring burner insert for lean flame stabilization developed for NASA- sponsored reduced-gravity combustion experiments. A low-swirl burner developed for Department of Energy Basic Energy Sciences research on turbulent combustion.

  18. A decade of tritium technology development and operation at the tritium laboratory Karlsruhe

    Energy Technology Data Exchange (ETDEWEB)

    Doerr, L.; Besserer, U.; Bekris, N.; Bornschein, B.; Caldwell-Nichols, C.; Demange, D.; Cristescu, I.; Cristescu, I. R.; Glugla, M.; Hellriegel, G.; Schaefer, P.; Weite, S.; Wendel, J. [Forschungszentrum Karlsruhe, Inst. for Technical Physics, Tritium Laboratory Karlsruhe, P.O. Box 3640, D-76021 Karlsruhe (Germany)

    2008-07-15

    The Tritium Laboratory Karlsruhe (TLK) has been designed to handle relevant amounts of tritium for the development of tritium technology for fusion reactors. This paper describes the tritium technology development and experience gained during the upgrade of facilities, interventions, replacement of failed components and operation of the TLK since its commissioning with tritium in 1994. (authors)

  19. A New Species of Science Education: Harnessing the Power of Interactive Technology to Teach Laboratory Science

    Science.gov (United States)

    Reddy, Christopher

    2014-01-01

    Interactive television is a type of distance education that uses streaming audio and video technology for real-time student-teacher interaction. Here, I discuss the design and logistics for developing a high school laboratory-based science course taught to students at a distance using interactive technologies. The goal is to share a successful…

  20. Science and Technology Teachers' Views about the Causes of Laboratory Accidents

    Science.gov (United States)

    Aydogdu, Cemil

    2015-01-01

    The aim of this study was to determine science and technology teachers' views about the causes of the problems encountered in laboratories. In this research, phenomenology, a qualitative research design, was used. 21 science and technology teachers who were working in elementary schools in Eskisehir during the 2010-2011 spring semester were the…

  1. 76 FR 67154 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Program

    Science.gov (United States)

    2011-10-31

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF DEFENSE Office of the Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration... Register notice, 73 FR 73248-73252, to record amendments to eight legacy Science and Technology...

  2. Impression evaluation and laboratory use for single-unit crowns: Findings from The National Dental Practice-Based Research Network.

    Science.gov (United States)

    McCracken, Michael S; Litaker, Mark S; George, Ashley J; Durand, Scott; Malekpour, Sepideh; Marshall, Don G; Meyerowitz, Cyril; Carter, Lauren; Gordan, Valeria V; Gilbert, Gregg H

    2017-08-16

    Objectives were to determine the likelihood that a clinician accepts an impression for a single-unit crown and document crown remake rates. The authors developed a questionnaire that asked dentists about techniques used to fabricate single-unit crowns. The authors showed dentists photographs of 4 impressions and asked them to accept or reject each impression. The authors correlated answers with dentist and practice characteristics. Other questions pertained to laboratory use and crown remake rates. The response rate was 83% (1,777 of 2,132 eligible dentists). Of the 4 impressions evaluated, 3 received consistent responses, with 85% agreement. One impression was more equivocal; 52% accepted the impression. The likelihood of accepting an impression was associated significantly with the clinician's sex, race, ethnicity, and practice busyness. Clinicians produced 18 crowns per month on average, and 9% used in-office milling. Most dentists (59%) reported a remake rate of less than 2%, whereas 17% reported a remake rate greater than 4%. Lower remake rates were associated significantly with more experienced clinicians, optical impressions, and not using dual-arch trays. Although dentists were largely consistent in their evaluation of impressions (> 85%), nonclinical factors were associated with whether an impression was accepted or rejected. Lower crown remake rates were associated with more experienced clinicians, optical impressions, and not using dual-arch trays. These results provide a snapshot of clinical care considerations among a diverse group of dentists. Clinicians can compare their own remake rates and impression evaluation techniques with those in this sample when developing best practice protocols. Copyright © 2017 American Dental Association. Published by Elsevier Inc. All rights reserved.

  3. Ceramic dental biomaterials and CAD/CAM technology: state of the art.

    Science.gov (United States)

    Li, Raymond Wai Kim; Chow, Tak Wah; Matinlinna, Jukka Pekka

    2014-10-01

    Ceramics are widely used as indirect restorative materials in dentistry because of their high biocompatibility and pleasing aesthetics. The objective is to review the state of the arts of CAD/CAM all-ceramic biomaterials. CAD/CAM all-ceramic biomaterials are highlighted and a subsequent literature search was conducted for the relevant subjects using PubMed followed by manual search. Developments in CAD/CAM technology have catalyzed researches in all-ceramic biomaterials and their applications. Feldspathic glass ceramic and glass infiltrated ceramic can be fabricated by traditional laboratory methods or CAD/CAM. The advent of polycrystalline ceramics is a direct result of CAD/CAM technology without which the fabrication would not have been possible. The clinical uses of these ceramics have met with variable clinical success. Multiple options are now available to the clinicians for the fabrication of aesthetic all ceramic restorations. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  4. Can they really be opposite? A new look at four critical aspects of anterior dental morphology.

    Science.gov (United States)

    Greenberg, Joseph R

    2008-09-01

    Human dental anatomy has not changed significantly in hundreds of years. Dental students and students of dental laboratory technology learn human dental anatomy as fundamental to their didactic work. Yet, so often we see dental restorations that do not follow the accepted basic design criteria of natural teeth. A possible conclusion is that the information was correctly presented as a basic science, but not completely carried over into clinical practice. When visually essential aspects of dental anatomy and composition are not accurately incorporated into esthetic restorations, patients are not completely served, and practitioners may be frustrated as well. This article reviews four essential aspects of anterior dental morphology--anterior tooth width/length proportions, bilateral symmetry, incisal edges, and incisal embrasures--that often are not accurately incorporated into dental restorations, and positions them in an easy to remember format: opposites.

  5. Proceedings of symposium on technology in laboratories by department of engineering and technical services

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-06-01

    The Symposium on Technology in Laboratories was held on March 14 and 15 at Ceratopia Toki in Toki City, Gifu Prefecture, Japan. This symposium was hosted by National Institute for Fusion Science (NIFS). There were 407 participants from many Japanese universities, national laboratories, technical colleges and from some Japanese Industrial world. One hundred and thirty one papers were presented in the symposium. Technical experience and new techniques were reported and discussed being divided into five sessions; technology of fabrication, device technology, diagnostic and control system, cryogenics, computer and data processing. (author)

  6. Advanced Safeguards Technology Demonstration at Pacific Northwest National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Orton, Christopher R.; Schwantes, Jon M.; Bryan, Samuel A.; Levitskaia, Tatiana G.; Duckworth, Douglas C.; Douglas, Matthew; Farmer, O. T.; Fraga, Carlos G.; Lehn, Scott A.; Liezers, Martin; Peper, Shane M.; Christensen, Richard

    2008-10-01

    The IAEA has established international safeguards standards for fissionable materials at spent fuel reprocessing plants to ensure that significant quantities of weapons-grade nuclear material are not diverted over a specified time frame. It is, therefore, necessary to confirm proper operational performance to verify facilities operate under adequate safeguard-declared conditions. This verification can be achieved by employing monitoring equipment. Online real time monitoring of the flowsheet radiochemical streams provides a unique capability to rapidly identify deviations from normal operating conditions. Flowsheet monitoring technologies being developed at PNNL include three integrated systems: Multi-Isotope Process (MIP) Monitor, spectroscopy-based monitor (UV-vis-NIR and Raman spectrometers), and Electrochemically Modulated Separations (EMS). The MIP Monitor is designed to identify off-normal conditions in process streams using gamma spectroscopy and pattern recognition software. The spectroscopic monitoring continuously measures chemical compositions of the process streams including actinide metal ions (U, Pu, Np), selected fission products, and major cold flowsheet chemicals. EMS provides an on-line means for pre-separating and pre-concentrating elements of interest out of complex matrices prior to detection. PNNL is preparing to test these multi-parametric technologies using different samples of dissolved spent fuel and aqueous and organic phases of the PUREX and UREX flowsheets. We will report our on-going efforts with specific focus given to quantifying sensitivity of the MIP Monitor and UV-Vis and Raman spectrometers to detect minor changes in major process variables.

  7. TECHNOLOGICAL COMPETENCE OF FUTURE ENGINEER: FORMATION AND DEVELOPMENT IN COMPUTER INTEGRATED LABORATORY WORKSHOP ON PHYSICS

    Directory of Open Access Journals (Sweden)

    Ihor S. Chernetskyi

    2013-12-01

    Full Text Available The article examines the category «technological competence» and the definition of its components according to the educational process. A structural and functional model of technological competence of future engineers through forms, means, methods and technologies of computer oriented laboratory work. Selected blocks and elements of the model in the course of a typical student laboratory work on the course of general physics. We consider the possibility of using some type of digital labs «Phywe», «Fourier» and modern electronic media (flash books to optimize laboratory work at the Technical University. The analysis of the future research of structural elements model of technological competence.

  8. [Study of the effect of fluoride removal agent and microabrasion technology in LED teeth whitening of dental fluorosis].

    Science.gov (United States)

    Jia, Yan; Zhang, Rong; Luo, Hong-Xia; Li, Ping; Zhang, Chun-Lei

    2016-10-01

    To evaluate the effect of fluoride removal agent and microabrasion technology in LED teeth whitening of dental fluorosis. One hundred and twelve patients with moderate dental fluorosis treated from August 2012 to July 2015 were divided into experimental group and control group according to random number table, with 61 cases in each group. In addition to pretreatment for all patients, patients in the control group were given combined treatment of Beyond LED whitening and fluoride removal agent; while patients in the experimental group were given microabrasion before LED whitening, with the same subsequent treatment process as that in the control group. The whitening effect and tooth sensitivity during whitening were compared between the two groups at the completion of treatment, 1 month and 6 months after treatment. SPSS 19.0 software package was employed for statistical analysis. There were no ineffective or lost patients in 2 groups. The effective rate of whitening for patients in the experimental group at completion of treatment, 1 month and 6 months after treatment was significantly higher than that in the control group (P0.05). Combined treatment with fluoride removal agent and microabrasion technology in LED teeth whitening for dental fluorosis can significantly improve the whitening effect and will not interfered by significantly increased tooth sensitivity.

  9. Virtual Cultural Landscape Laboratory Based on Internet GIS Technology

    Science.gov (United States)

    Bill, R.

    2012-07-01

    In recent years the transfer of old documents (books, paintings, maps etc.) from analogue to digital form has gained enormous importance. Numerous interventions are concentrated in the digitalisation of library collections, but also commercial companies like Microsoft or Google try to convert large analogue stocks such as books, paintings, etc. in digital form. Data in digital form can be much easier made accessible to a large user community, especially to the interested scientific community. The aim of the described research project is to set up a virtual research environment for interdisciplinary research focusing on the landscape of the historical Mecklenburg in the north-east of Germany. Georeferenced old maps from 1786 and 1890 covering complete Mecklenburg should be combined with current geo-information, satellite and aerial imagery to support spatio-temporal research aspects in different scales in space (regional 1:200,000 to local 1:25.000) and time (nearly 250 years in three time steps, the last 30 years also in three time slices). The Virtual Laboratory for Cultural Landscape Research (VKLandLab) is designed and developed by the Chair of Geodesy and Geoinformatics, hosted at the Computing Centre (ITMZ) and linked to the Digital Library (UB) at Rostock University. VKLandLab includes new developments such as wikis, blogs, data tagging, etc. and proven components already integrated in various data-related infrastructures such as InternetGIS, data repositories and authentication structures. The focus is to build a data-related infrastructure and a work platform that supports students as well as researchers from different disciplines in their research in space and time.

  10. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part B, Dismantlement, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  11. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part C, Robotics/automation, Waste management

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  12. CONTROL TESTING OF THE UK NATIONAL NUCLEAR LABORATORY'S RADBALL TECHNOLOGY AT SAVANNAH RIVER NATIONAL LABORATORY

    Energy Technology Data Exchange (ETDEWEB)

    Farfan, E.

    2009-11-23

    The UK National Nuclear Laboratory (NNL) has developed a remote, non-electrical, radiation-mapping device known as RadBall (patent pending), which offers a means to locate and quantify radiation hazards and sources within contaminated areas of the nuclear industry. To date, the RadBall has been deployed in a number of technology trials in nuclear waste reprocessing plants at Sellafield in the UK. The trials have demonstrated the successful ability of the RadBall technology to be deployed and retrieved from active areas. The positive results from these initial deployment trials and the anticipated future potential of RadBall have led to the NNL partnering with the Savannah River National Laboratory (SRNL) to further underpin and strengthen the technical performance of the technology. RadBall consists of a colander-like outer shell that houses a radiation-sensitive polymer sphere. It has no power requirements and can be positioned in tight or hard-to reach places. The outer shell works to collimate radiation sources and those areas of the polymer sphere that are exposed react, becoming increasingly less transparent, in proportion to the absorbed dose. The polymer sphere is imaged in an optical-CT scanner which produces a high resolution 3D map of optical attenuation coefficients. Subsequent analysis of the optical attenuation maps provides information on the spatial distribution and strength of the sources in a given area forming a 3D characterization of the area of interest. This study completed at SRNL addresses key aspects of the testing of the RadBall technology. The first set of tests was performed at Savannah River Nuclear Solutions Health Physics Instrument Calibration Laboratory (HPICL) using various gamma-ray sources and an x-ray machine with known radiological characteristics. The objective of these preliminary tests was to identify the optimal dose and collimator thickness. The second set of tests involved a highly contaminated hot cell. The objective of

  13. 2011 Mississippi Curriculum Framework: Postsecondary Dental Assisting Technology. (Program CIP: 51.0601 - Dental Assisting/Assistant)

    Science.gov (United States)

    Addison, Emily; Bokros, Christy; Gavant, H. Richard; Johnson, Robin

    2011-01-01

    As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

  14. Marginal Accuracy and Internal Fit of Dental Copings Fabricated by Modern Additive and Subtractive Digital Technologies.

    Science.gov (United States)

    Nelson, Neha; K S, Jyothi; Sunny, Kiran

    2017-03-01

    The margins of copings for crowns and retainers of fixed partial dentures affect the progress of microleakage and dental caries. Failures occur due to altered fit which is also influenced by the method of fabrication. An in-vitro study was conducted to determine among the cast base metal, copy milled zirconia, computer aided designing computer aided machining/manufacturing zirconia and direct metal laser sintered copings which showed best marginal accuracy and internal fit. Forty extracted maxillary premolars were mounted on an acrylic model and reduced occlusally using a milling machine up to a final tooth height of 4 mm from the cementoenamel junction. Axial reduction was accomplished on a surveyor and a chamfer finish line was given. The impressions and dies were made for fabrication of copings which were luted on the prepared teeth under standardized loading, embedded in self-cure acrylic resin, sectioned and observed using scanning electron microscope for internal gap and marginal accuracy. The copings fabricated using direct metal laser sintering technique exhibited best marginal accuracy and internal fit. Comparison of mean between the four groups by ANOVA and post-hoc Tukey HSD tests showed a statistically significant difference between all the groups (p⟨0.05). It was concluded that the copings fabricated using direct metal laser sintering technique exhibited best marginal accuracy and internal fit. Additive digital technologies such as direct metal laser sintering could be cost-effective for the clinician, minimize failures related to fit and increase longevity of teeth and prostheses. Copyright© 2017 Dennis Barber Ltd.

  15. Advanced Safeguards Technology Demonstration at Pacific Northwest National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Arrigo, Leah M.; Bryan, Samuel A.; Christensen, Richard; Douglas, Matthew; Duckworth, Douglas C.; Fraga, Carlos G.; Levitskaia, Tatiana G.; Liezers, Martin; Orton, Christopher R.; Peper, Shane M.; Schwantes, Jon M.

    2010-05-21

    The International Atomic Energy Agency (IAEA) has established international safeguards standards for fissionable material at spent fuel reprocessing plants to ensure that significant quantities of weapons-grade nuclear material are not diverted over a specified time frame. Currently, methods to verify that the facilities are operating under adequate safeguard-declared conditions require time consuming sampling and expensive, destructive analysis. The time delay between sampling and subsequent analysis provides a potential opportunity to divert the material out of the appropriate chemical stream. One way to avoid this problem is to use process monitoring equipment that is capable of on-line and in near-real time monitoring of the flowsheet radiochemical streams to rapidly identify deviations from normal operating conditions. Three integrated systems for flowsheet monitoring are currently being developed at PNNL including: 1) Multi-Isotope Process Monitor (MIP), 2) a spectroscopy-based monitor utilizing UV-Vis-NIR (Ultra Violet-Visible-Near Infrared) and Raman spectrometers, and 3) Electrochemically Modulated Separations (EMS). MIP uses gamma spectroscopy and pattern recognition software to identify off-normal conditions in process streams. The UV-Vis-NIR and Raman spectroscopic monitoring continuously measures chemical compositions of the process streams including actinide metal ions (U, Pu, Np), selected fission products, and major cold flowsheet chemicals. EMS provides an on-line means for pre-separating and preconcentrating elements of interest out of complex matrices prior to detection via non-destructive assay by gamma spectroscopy or destructive analysis with mass spectrometry. PNNL previously reported some of its initial modeling work as proof of principle. Here we will provide a general overview of the technologies and the ongoing demonstrations that utilize actual spent fuel.

  16. Laboratory for development of open source geospatial technologies – role in education and research

    Directory of Open Access Journals (Sweden)

    Milan Kilibarda

    2014-06-01

    Full Text Available International Cartographic CBOs (International Cartographic Association- ICA in partnership with the Open Source Geospatial Foundation-OSGeo has started the initiative ICA-OSGeo Labs to promote and use open source technologies in education and research. For many years, the use and development of open source software and technologies have been present in the field of research and education at the Faculty of Civil Engineering at the Department of Geodesy and Geoinformatics, University of Belgrade. Additionally, at the University of Belgrade, Faculty of Civil Engineering a laboratory called "Laboratory for development of open source geospatial technologies - OSGL" has recently been established. This paper presents the current experience of the lab members in using open source software in geoinformatics, research and education as well as the perspectives and future activities of the newly formed laboratory.

  17. Idaho National Engineering Laboratory waste area groups 1--7 and 10 Technology Logic Diagram. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Technology Logic Diagram was developed to provide technical alternatives for environmental restoration projects at the Idaho National Engineering Laboratory. The diagram (three volumes) documents suggested solutions to the characterization, retrieval, and treatment phases of cleanup activities at contaminated sites within 8 of the laboratory`s 10 waste area groups. Contaminated sites at the laboratory`s Naval Reactor Facility and Argonne National Laboratory-West are not included in this diagram.

  18. Solid oxide cell R&D at Riso National Laboratory-and its transfer to technology

    DEFF Research Database (Denmark)

    Linderoth, Søren

    2009-01-01

    Risø National Laboratory has conducted R&D on solid oxide cells for almost 20 years—all the time together with industries with interest in deploying the technology when mature. Risø National Laboratory (Risø) and Topsoe Fuel Cell A/S (TOFC) have for several years jointly carried out a development...... by the consortium, e.g. a metal-supported cell. TOFC has an extended program to develop the SOFC technology all the way to a marketable product....

  19. Solid oxide cell R&D at Riso National Laboratory-and its transfer to technology

    DEFF Research Database (Denmark)

    Linderoth, Søren

    2009-01-01

    Risø National Laboratory has conducted R&D on solid oxide cells for almost 20 years—all the time together with industries with interest in deploying the technology when mature. Risø National Laboratory (Risø) and Topsoe Fuel Cell A/S (TOFC) have for several years jointly carried out a development...... by the consortium, e.g. a metal-supported cell. TOFC has an extended program to develop the SOFC technology all the way to a marketable product....

  20. Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part C, Waste Management

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    This report documents activities at ORNL including waste management and remedial action at the site; also waste processing and disposal; robotics and automation of the laboratory; and regulatory compliance

  1. Impact of Digital Tooth Preparation Evaluation Technology on Preclinical Dental Students' Technical and Self-Evaluation Skills.

    Science.gov (United States)

    Gratton, David G; Kwon, So Ran; Blanchette, Derek; Aquilino, Steven A

    2016-01-01

    The aim of this study was to evaluate the effect of digital tooth preparation imaging and evaluation technology on dental students' technical abilities, self-evaluation skills, and the assessment of their simulated clinical work. A total of 80 second-year students at one U.S. dental school were assigned to one of three groups: control (n=40), E4D Compare (n=20), and Sirona prepCheck (n=20). Students in the control group were taught by traditional teaching methodologies, and the technology-assisted groups received both traditional training and supplementary feedback from the corresponding digital system. Three outcomes were measured: faculty technical score, self-evaluation score, and E4D Compare scores at 0.30 mm tolerance. Correlations were determined between the groups' scores from visual assessment and self-evaluation and between the visual assessment and digital scores. The results showed that the visual assessment and self-evaluation scores did not differ among groups (p>0.05). Overall, correlations between visual and digital assessment scores were modest though statistically significant (5% level of significance). These results suggest that the use of digital tooth preparation evaluation technology did not impact the students' prosthodontic technical and self-evaluation skills. Visual scores given by faculty and digital assessment scores correlated moderately in only two instances.

  2. Annual Technology Baseline (Including Supporting Data); NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Blair, Nate; Cory, Karlynn; Hand, Maureen; Parkhill, Linda; Speer, Bethany; Stehly, Tyler; Feldman, David; Lantz, Eric; Augusting, Chad; Turchi, Craig; O' Connor, Patrick

    2015-07-08

    Consistent cost and performance data for various electricity generation technologies can be difficult to find and may change frequently for certain technologies. With the Annual Technology Baseline (ATB), National Renewable Energy Laboratory provides an organized and centralized dataset that was reviewed by internal and external experts. It uses the best information from the Department of Energy laboratory's renewable energy analysts and Energy Information Administration information for conventional technologies. The ATB will be updated annually in order to provide an up-to-date repository of current and future cost and performance data. Going forward, we plan to revise and refine the values using best available information. The ATB includes both a presentation with notes (PDF) and an associated Excel Workbook. The ATB includes the following electricity generation technologies: land-based wind; offshore wind; utility-scale solar PV; concentrating solar power; geothermal power; hydropower plants (upgrades to existing facilities, powering non-powered dams, and new stream-reach development); conventional coal; coal with carbon capture and sequestration; integrated gasification combined cycle coal; natural gas combustion turbines; natural gas combined cycle; conventional biopower. Nuclear laboratory's renewable energy analysts and Energy Information Administration information for conventional technologies. The ATB will be updated annually in order to provide an up-to-date repository of current and future cost and performance data. Going forward, we plan to revise and refine the values using best available information.

  3. Meet the best Award-winning technologies from Pacific Northwest Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    The Battelle Memorial Institute has managed the Pacific Northwest Laboratory (PNL) for the US Department of Energy for 25 years. During this time, numerous new technologies have been discovered and developed at PNL as a result of our research programs. This document will introduce you to some of the more significant discoveries and newly commercialized technologies. Each of the technologies described has received an award from Research Development magazine or the Federal Laboratory Consortium--sometimes both Each technology is available to you through PNL's technology transfer program or one of our licensees. Similarly, our award-winning scientists and engineers are available to assist you as you search for innovative technologies to solve your technical problems. These researchers are familiar with current problems confronting industry, government agencies, and the academic community. They are happy to apply their skills and PNL's resources to your problems. PNL encourages its researchers to work with government agencies, universities, and US industries. PNL technology transfer programs address the nation's drive toward increased competitiveness by being flexible and aggressive, and are designed to tailor results to fit your needs and those of your clients. If you are in search of a new technology or increased competitiveness, consider collaborative efforts with our award-winning staff, whose accomplishments are synopsized in this booklet.

  4. Meet the best Award-winning technologies from Pacific Northwest Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    The Battelle Memorial Institute has managed the Pacific Northwest Laboratory (PNL) for the US Department of Energy for 25 years. During this time, numerous new technologies have been discovered and developed at PNL as a result of our research programs. This document will introduce you to some of the more significant discoveries and newly commercialized technologies. Each of the technologies described has received an award from Research Development magazine or the Federal Laboratory Consortium--sometimes both Each technology is available to you through PNL's technology transfer program or one of our licensees. Similarly, our award-winning scientists and engineers are available to assist you as you search for innovative technologies to solve your technical problems. These researchers are familiar with current problems confronting industry, government agencies, and the academic community. They are happy to apply their skills and PNL's resources to your problems. PNL encourages its researchers to work with government agencies, universities, and US industries. PNL technology transfer programs address the nation's drive toward increased competitiveness by being flexible and aggressive, and are designed to tailor results to fit your needs and those of your clients. If you are in search of a new technology or increased competitiveness, consider collaborative efforts with our award-winning staff, whose accomplishments are synopsized in this booklet.

  5. Use and Acceptance of Information and Communication Technology Among Laboratory Science Students

    Science.gov (United States)

    Barnes, Brenda C.

    Online and blended learning platforms are being promoted within laboratory science education under the assumption that students have the necessary skills to navigate online and blended learning environments. Yet little research has examined the use of information and communication technology (ICT) among the laboratory science student population. The purpose of this correlational, survey research study was to explore factors that affect use and acceptance of ICT among laboratory science students through the theoretical lens of the unified theory of acceptance and use of technology (UTAUT) model. An electronically delivered survey drew upon current students and recent graduates (within 2 years) of accredited laboratory science training programs. During the 4 week data collection period, 168 responses were received. Results showed that the UTAUT model did not perform well within this study, explaining 25.2% of the variance in use behavior. A new model incorporating attitudes toward technology and computer anxiety as two of the top variables, a model significantly different from the original UTAUT model, was developed that explained 37.0% of the variance in use behavior. The significance of this study may affect curriculum design of laboratory science training programs wanting to incorporate more teaching techniques that use ICT-based educational delivery, and provide more options for potential students who may not currently have access to this type of training.

  6. Planning for the V&V of infused software technologies for the Mars Science Laboratory Mission

    Science.gov (United States)

    Feather, Martin S.; Fesq, Lorraine M.; Ingham, Michel D.; Klein, Suzanne L.; Nelson, Stacy D.

    2004-01-01

    NASA's Mars Science Laboratory (MSL) rover mission is planning to make use of advanced software technologies in order to support fulfillment of its ambitious science objectives. The mission plans to adopt the Mission Data System (MDS) as the mission software architecture, and plans to make significant use of on-board autonomous capabilities for the rover software.

  7. Vertical and Horizontal Integration of Laboratory Curricula and Course Projects across the Electronic Engineering Technology Program

    Science.gov (United States)

    Zhan, Wei; Goulart, Ana; Morgan, Joseph A.; Porter, Jay R.

    2011-01-01

    This paper discusses the details of the curricular development effort with a focus on the vertical and horizontal integration of laboratory curricula and course projects within the Electronic Engineering Technology (EET) program at Texas A&M University. Both software and hardware aspects are addressed. A common set of software tools are…

  8. Out of the Laboratory and Down to the Bay: Writing in Science and Technology Studies.

    Science.gov (United States)

    Myers, Greg

    1996-01-01

    Offers a personal view of some developments in science and technology studies. Argues that the field has emerged from laboratory studies to engagement with broader issues of power and change. Explains that frameworks developed in the sociology of scientific knowledge have been applied to the analysis of things, of social boundaries, and of…

  9. 78 FR 34655 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2013-06-10

    ... of the Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration... Demonstration Project (75 FR 77380-77447, December 10, 2010). SUMMARY: On December 10, 2010 (75 FR 77380-77447), DoD published a notice of approval of a personnel management demonstration project for eligible...

  10. Advanced methods for teaching electronic-nose technologies to diagnosticians and clinical laboratory technicians

    Science.gov (United States)

    Alphus D. Wilson

    2012-01-01

    Electronic-detection technologies and instruments increasingly are being utilized in the biomedical field to perform a wide variety of clinical operations and laboratory analyses to facilitate the delivery of health care to patients. The introduction of improved electronic instruments for diagnosing diseases and for administering treatments has required new training of...

  11. A Needs Assessment of the Medical Laboratory Technology Students at New York City Technical College.

    Science.gov (United States)

    Selvadurai, Ranjani

    A study examined the needs of medical laboratory technology students at New York City Technical College. The nominal group technique (which involves silent generation of ideas in writing, round-robin feedback, and individual voting on priority ideas) was used to assess the academic and personal needs of 20 students. The following seven significant…

  12. Theoretical and practical considerations for teaching diagnostic electronic-nose technologies to clinical laboratory technicians

    Science.gov (United States)

    Alphus D. Wilson

    2012-01-01

    The rapid development of new electronic technologies and instruments, utilized to perform many current clinical operations in the biomedical field, is changing the way medical health care is delivered to patients. The majority of test results from laboratory analyses, performed with these analytical instruments often prior to clinical examinations, are frequently used...

  13. Perceptions of a Mobile Technology on Learning Strategies in the Anatomy Laboratory

    Science.gov (United States)

    Mayfield, Chandler H.; Ohara, Peter T.; O'Sullivan, Patricia S.

    2013-01-01

    Mobile technologies offer new opportunities to improve dissection learning. This study examined the effect of using an iPad-based multimedia dissection manual during anatomy laboratory instruction on learner's perception of anatomy dissection activities and use of time. Three experimental dissection tables used iPads and three tables served as a…

  14. Separation technologies for the treatment of Idaho National Engineering Laboratory Wastes

    Energy Technology Data Exchange (ETDEWEB)

    Todd, T.; Herbst, S.

    1996-10-01

    The Idaho National Engineering Laboratory (INEL) is collaborating with several DOE and international organizations to develop and evaluate: technologies for the treatment of acidic high-level radioactive wastes. The focus on the treatment of high-level radioactive wastes is on the removal of cesium and strontium from wastes typically 1 to 3 M in acidity. Technologies to treat groundwater contaminated with radionuclides and/or toxic metals. Technologies to remove toxic metals from hazardous or mixed waste streams, for neutral pH to 3 M acidic waste streams.

  15. Dental Fluorosis

    Science.gov (United States)

    ... have been broadly termed dental fluorosis. What is dental fluorosis? Dental fluorosis is a condition that causes ... less than 2 milligrams per liter. What causes dental fluorosis? Dental fluorosis is caused by taking in ...

  16. Dental Amalgam

    Science.gov (United States)

    ... Products and Medical Procedures Dental Devices Dental Amalgam Dental Amalgam Share Tweet Linkedin Pin it More sharing options Linkedin Pin it Email Print Dental amalgam is a dental filling material which is ...

  17. Technology study of Gunite tank sludge mobilization at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    DeVore, J.R.; Herrick, T.J.; Lott, K.E.

    1994-12-01

    The Oak Ridge National Laboratory (ORNL) Gunite Tank Sludge Mobilization Technology Study was initiated to support the Gunite Tank Treatability Study effort. The technology study surveyed the methods and technologies available for tank cleaning and sludge mobilization in a radioactive environment. Technologies were identified and considered for applicability to the Gunite and Associated Tanks (GAAT) problems. These were then either accepted for further study or rejected as not applicable. Technologies deemed applicable to the GAAT sludge removal project were grouped for evaluation according to (1) deployment method, (2) types of remotely operated end effector equipment applicable to removal of sludge, (3) methods for removing wastes from the tanks, and (4) methods for concrete removal. There were three major groups of deployment technologies: ``past practice`` technologies, mechanical arm-based technologies, and vehicle-based technologies. The different technologies were then combined into logical sequences of deployment platform, problem, end effector, conveyance, post-removal treatment required (if any), and disposition of the waste. Many waste removal options are available, but the best technology in one set of circumstances at one site might not be the best type to use at a different site. No single technology is capable of treating the entire spectrum of wastes that will be encountered in GAAT. None of the systems used in other industries appears to be suitable, primarily because of the nature of the sludges in the GAAT Operable Unit (OU), their radiation levels, and tank geometries. Other commercial technologies were investigated but rejected because the authors did not believe them to be applicable.

  18. Incorporating spectroscopy and measurement technology into the high school chemistry laboratory

    Science.gov (United States)

    Harbert, Emily Ann

    Science and technology are becoming increasingly important in maintaining a healthy economy at home and a competitive edge on the world stage, though that is just one facet affected by inadequate science education in the United States. Engaging students in the pursuit of knowledge and giving them the skills to think critically are paramount. One small way to assist in achieving these goals is to increase the quality and variety of technology-rich activities conducted in high school classrooms. Incorporating more laboratory measurement technology into high schools may incite more student interest in the processes and practices of science and may allow students to learn to think more critically about their data and what it represents. The first objective of the work described herein was to determine what measurement technology is being used in schools and to what extent, as well as to determine other teacher needs and preferences. Second, the objective was to develop a new program to provide incoming freshmen (or rising seniors) with measurement technology training they did not receive in high school, and expose them to new research and career opportunities in science. The final objective was to create a technology-rich classroom laboratory activity for use in high schools.

  19. Experimental and clinical-laboratory research effectiveness of treatment of main dental diseases in the workers of mining production

    Directory of Open Access Journals (Sweden)

    Glazunov O.A.

    2013-03-01

    Full Text Available The purpose of this study was to evaluate the developed treatment-prevention complex of dental disease in miners. In experiment 70 white rats were exposed to the impact of unfavorable factors of ore-mining industry (increased dust-content in the air and general vibration daily during 5 hours over 5 months’ period with simultaneous use of the worked up treatment-prophylactic complex which causes normalization of biochemical parameters in oral liquid, serum and bone tissue of animals. Application of the proposed complex in 56 miners with dust-caused bronchitis and vibration disease during 2 years’ period favored improvement of dental status, improvement hygiene and periodontal indices, biochemical parameters of saliva, reduce of the interval of pH (ΔpH fluctuations, normalization of number of electro¬phoretic mobility of buccal cell nuclei. The scheme of application of health care complex includes adaptogen "Biotrit C", membranostabilizator "Lecithin D3", complex of vitamins and minerals "Alphabet", Elixir "Lizodent", remi¬neralizing and antiinflammatory toothpastes; this improves the efficiency of dental treatment and reduces relapses.

  20. Commercialization of Los Alamos National Laboratory technologies via small businesses. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Brice, R.; Cartron, D.; Rhyne, T.; Schulze, M.; Welty, L.

    1997-06-01

    Over the past decade, numerous companies have been formed to commercialize research results from leading U.S. academic and research institutions. Emerging small businesses in areas such as Silicon Valley, Boston`s Route 128 corridor, and North Carolina`s Research Triangle have been especially effective in moving promising technologies from the laboratory bench to the commercial marketplace--creating new jobs and economic expansion in the process. Unfortunately, many of the U.S. national laboratories have not been major participants in this technology/commercialization activity, a result of a wide variety of factors which, until recently, acted against successful commercialization. This {open_quotes}commercialization gap{close_quotes} exists partly due to a lack, within Los Alamos in particular and the DOE in general, of in-depth expertise and experience in such business areas as new business development, securities regulation, market research and the determination of commercial potential, the identification of entrepreneurial management, marketing and distribution, and venture capital sources. The immediate consequence of these factors is the disappointingly small number of start-up companies based on technologies from Los Alamos National Laboratory that have been attempted, the modest financial return Los Alamos has received from these start-ups, and the lack of significant national recognition that Los Alamos has received for creating and commercializing these technologies.

  1. Evaluation of Side Stream Filtration Technology at Oak Ridge National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, Brian K.

    2014-08-01

    This technology evaluation was performed by Pacific Northwest National Laboratory and Oak Ridge National Laboratory on behalf of the Federal Energy Management Program. The objective was to quantify the benefits side stream filtration provides to a cooling tower system. The evaluation assessed the performance of an existing side stream filtration system at a cooling tower system at Oak Ridge National Laboratory’s Spallation Neutron Source research facility. This location was selected because it offered the opportunity for a side-by-side comparison of a system featuring side stream filtration and an unfiltered system.

  2. Assessment of Application Technology of Natural User Interfaces in the Creation of a Virtual Chemical Laboratory

    Science.gov (United States)

    Jagodziński, Piotr; Wolski, Robert

    2015-02-01

    Natural User Interfaces (NUI) are now widely used in electronic devices such as smartphones, tablets and gaming consoles. We have tried to apply this technology in the teaching of chemistry in middle school and high school. A virtual chemical laboratory was developed in which students can simulate the performance of laboratory activities similar to those that they perform in a real laboratory. Kinect sensor was used for the detection and analysis of the student's hand movements, which is an example of NUI. The studies conducted found the effectiveness of educational virtual laboratory. The extent to which the use of a teaching aid increased the students' progress in learning chemistry was examined. The results indicate that the use of NUI creates opportunities to both enhance and improve the quality of the chemistry education. Working in a virtual laboratory using the Kinect interface results in greater emotional involvement and an increased sense of self-efficacy in the laboratory work among students. As a consequence, students are getting higher marks and are more interested in the subject of chemistry.

  3. Survey of subsurface treatment technologies for environmental restoration sites at Sandia National Laboratories, New Mexico.

    Energy Technology Data Exchange (ETDEWEB)

    McGrath, Lucas K.; Ho, Clifford Kuofei; Wright, Jerome L.

    2003-08-01

    This report provides a survey of remediation and treatment technologies for contaminants of concern at environmental restoration (ER) sites at Sandia National Laboratories, New Mexico. The sites that were evaluated include the Tijeras Arroyo Groundwater, Technical Area V, and Canyons sites. The primary contaminants of concern at these sites include trichloroethylene (TCE), tetrachloroethylene (PCE), and nitrate in groundwater. Due to the low contaminant concentrations (close to regulatory limits) and significant depths to groundwater ({approx}500 feet) at these sites, few in-situ remediation technologies are applicable. The most applicable treatment technologies include monitored natural attenuation and enhanced bioremediation/denitrification to reduce the concentrations of TCE, PCE, and nitrate in the groundwater. Stripping technologies to remove chlorinated solvents and other volatile organic compounds from the vadose zone can also be implemented, if needed.

  4. Heat Pump Water Heater Technology Assessment Based on Laboratory Research and Energy Simulation Models: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Hudon, K.; Sparn, B.; Christensen, D.; Maguire, J.

    2012-02-01

    This paper explores the laboratory performance of five integrated Heat Pump Water Heaters (HPWHs) across a wide range of operating conditions representative of US climate regions. Laboratory results demonstrate the efficiency of this technology under most of the conditions tested and show that differences in control schemes and design features impact the performance of the individual units. These results were used to understand current model limitations, and then to bracket the energy savings potential for HPWH technology in various US climate regions. Simulation results show that HPWHs are expected to provide significant energy savings in many climate zones when compared to other types of water heaters (up to 64%, including impact on HVAC systems).

  5. Establishment of an Environmental Control Technology Laboratory with a Circulating Fluidized-Bed Combustion System

    Energy Technology Data Exchange (ETDEWEB)

    Wei-Ping Pan; Yan Cao; John Smith

    2008-05-31

    On February 14, 2002, President Bush announced the Clear Skies Initiative, a legislative proposal to control the emissions of nitrogen oxides (NO{sub x}), sulfur dioxide (SO{sub 2}), and mercury from power plants. In response to this initiative, the National Energy Technology Laboratory organized a Combustion Technology University Alliance and hosted a Solid Fuel Combustion Technology Alliance Workshop. The workshop identified multi-pollutant control; improved sorbents and catalysts; mercury monitoring and capture; and improved understanding of the underlying reaction chemistry occurring during combustion as the most pressing research needs related to controlling environmental emissions from fossil-fueled power plants. The Environmental Control Technology Laboratory will help meet these challenges and offer solutions for problems associated with emissions from fossil-fueled power plants. The goal of this project was to develop the capability and technology database needed to support municipal, regional, and national electric power generating facilities to improve the efficiency of operation and solve operational and environmental problems. In order to effectively provide the scientific data and the methodologies required to address these issues, the project included the following aspects: (1) Establishing an Environmental Control Technology Laboratory using a laboratory-scale, simulated fluidized-bed combustion (FBC) system; (2) Designing, constructing, and operating a bench-scale (0.6 MW{sub th}), circulating fluidized-bed combustion (CFBC) system as the main component of the Environmental Control Technology Laboratory; (3) Developing a combustion technology for co-firing municipal solid waste (MSW), agricultural waste, and refuse-derived fuel (RDF) with high sulfur coals; (4) Developing a control strategy for gaseous emissions, including NO{sub x}, SO{sub 2}, organic compounds, and heavy metals; and (5) Developing new mercury capturing sorbents and new

  6. Moving out of the Laboratory: Deploying Pervasive Technologies in a Hospital

    DEFF Research Database (Denmark)

    Hansen, Thomas Riisgaard; Bardram, Jakob; Søgaard, Mads

    2006-01-01

    The authors deployed a distributed system containing a location-tracking system, a context-awareness system, wall-sized displays, and mobile phones in a Danish hospital's operating ward. This article presents the lessons they learned from deploying these pervasive computing technologies...... and a checklist of questions for researchers to consider relating to hardware, software, and organizational issues when moving pervasive systems out of the laboratory. This article is part of a special issue on Real-World Deployments....

  7. ATTITUDES OF MEDICAL LABORATORY TECHNOLOGY GRADUATES TOWARDS THE INTERNSHIP TRAINING PERIOD AT KING FAISAL UNIVERSITY

    OpenAIRE

    Bashawri, Layla A.M.; Mirghani A Ahmed; Bahnassy, Ahmed A.L.; Al-Salim, Jawaher A.

    2006-01-01

    Objectives: The objective of this present survey was to look into the attitudes of medical laboratory technology (MLT) graduates towards the internship training period of the MLT Department, College of Applied Medical Sciences, King Faisal University. Material and Methods: A self-administered questionnaire was designed and distributed for this purpose. The study period was from December 1st 2002 – 31st December 2004. Two-hundred questionnaires were distributed to recent graduates, and 115 wer...

  8. Emerging technologies in education and training: applications for the laboratory animal science community.

    Science.gov (United States)

    Ketelhut, Diane Jass; Niemi, Steven M

    2007-01-01

    This article examines several new and exciting communication technologies. Many of the technologies were developed by the entertainment industry; however, other industries are adopting and modifying them for their own needs. These new technologies allow people to collaborate across distance and time and to learn in simulated work contexts. The article explores the potential utility of these technologies for advancing laboratory animal care and use through better education and training. Descriptions include emerging technologies such as augmented reality and multi-user virtual environments, which offer new approaches with different capabilities. Augmented reality interfaces, characterized by the use of handheld computers to infuse the virtual world into the real one, result in deeply immersive simulations. In these simulations, users can access virtual resources and communicate with real and virtual participants. Multi-user virtual environments enable multiple participants to simultaneously access computer-based three-dimensional virtual spaces, called "worlds," and to interact with digital tools. They allow for authentic experiences that promote collaboration, mentoring, and communication. Because individuals may learn or train differently, it is advantageous to combine the capabilities of these technologies and applications with more traditional methods to increase the number of students who are served by using current methods alone. The use of these technologies in animal care and use programs can create detailed training and education environments that allow students to learn the procedures more effectively, teachers to assess their progress more objectively, and researchers to gain insights into animal care.

  9. Impact of Recent Constraints on Intellectual Freedom on Science and Technology at Lawrence Livermore National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Wadsworth, J

    2000-11-12

    The Lawrence Livermore National Laboratory (LLNL) was created in 1952 to meet the nation's need for an expanded nuclear weapons research and development (R&D) capability. LLNL quickly grew to become a full-fledged nuclear weapons design laboratory with a broad range of technical capabilities similar to those of our sister laboratory--Los Alamos--with which we shared mission responsibilities. By its very nature, nuclear weapons R&D requires some of the most advanced science and technology (S&T). Accordingly, there is an obvious need for careful attention to ensure that appropriate security measures exist to deal with the sensitive aspects of nuclear weapons development. The trade-off between advancing S&T at the Laboratory and the need for security is a complex issue that has always been with us, As Edward Teller noted in a recent commentary in a May, 1999 editorial in the New York Times: ''The reaction of President Harry Truman to the leaking of information is well known. He imposed no additional measures for security. Instead, we have clear knowledge that the disclosures by (Klaus) Fuchs caused Truman to call for accelerated work on all aspects of nuclear weapons. The right prescription for safety is not reaction to dangers that are arising, but rather action leading to more knowledge and, one hopes, toward positive interaction between nations.'' To explore the issue of intellectual freedom at a national security laboratory such as LLNL, one must understand the type of activities we pursue and how our research portfolio has evolved since the Laboratory was established. Our mission affects the workforce skills, capabilities, and security measures that the Laboratory requires. The national security needs of the US have evolved, along with the S&T community in which the Laboratory resides and to which it contributes. These factors give rise to a greater need for the Laboratory to interact with universities, industry, and other national

  10. On the integration of technology readiness levels at Sandia National Laboratories.

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, Beatriz R.; Mitchell, John Anthony

    2006-09-01

    Integrating technology readiness levels (TRL) into the management of engineering projects is critical to the mitigation of risk and improved customer/supplier communications. TRLs provide a common framework and language with which consistent comparisons of different technologies and approaches can be made. At Sandia National Laboratories, where technologies are developed, integrated and deployed into high consequence systems, the use of TRLs may be transformational. They are technology independent and span the full range of technology development including scientific and applied research, identification of customer requirements, modeling and simulation, identification of environments, testing and integration. With this report, we provide a reference set of definitions for TRLs and a brief history of TRLs at Sandia National Laboratories. We then propose and describe two approaches that may be used to integrate TRLs into the NW SMU business practices. In the first approach, we analyze how TRLs can be integrated within concurrent qualification as documented in TBP-100 [1]. In the second approach we take a look at the product realization process (PRP) as documented in TBP-PRP [2]. Both concurrent qualification and product realization are fundamental to the way weapons engineering work is conducted at this laboratory and the NWC (nuclear weapons complex) as a whole. Given the current structure and definitions laid out in the TBP-100 and TBP-PRP, we believe that integrating TRLs into concurrent qualification (TBP-100) rather than TBP-PRP is optimal. Finally, we note that our charter was to explore and develop ways of integrating TRLs into the NW SMU and therefore we do not significantly cover the development and history of TRLs. This work was executed under the auspices and direction of Sandia's Weapon Engineering Program. Please contact Gerry Sleefe, Deputy Program Director, for further information.

  11. Dental Charting. Student's Manual.

    Science.gov (United States)

    Weaver, Trudy Karlene; Apfel, Maura

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: dental anatomical terminology; tooth numbering systems;…

  12. Mechanical design, analysis, and laboratory testing of a dental implant with axial flexibility similar to natural tooth with periodontal ligament.

    Science.gov (United States)

    Pektaş, Ömer; Tönük, Ergin

    2014-11-01

    At the interface between the jawbone and the roots of natural teeth, a thin, elastic, shock-absorbing tissue, called the periodontal ligament, forms a cushion which provides certain flexibility under mechanical loading. The dental restorations supported by implants, however, involve comparatively rigid connections to the jawbone. This causes overloading of the implant while bearing functional loading together with neighboring natural teeth, which leads to high stresses within the implant system and in the jawbone. A dental implant, with resilient components in the upper structure (abutment) in order to mimic the mechanical behavior of the periodontal ligament in the axial direction, was designed, analyzed in silico, and produced for mechanical testing. The aims of the design were avoiding high levels of stress, loosening of the abutment connection screw, and soft tissue irritations. The finite element analysis of the designed implant revealed that the elastic abutment yielded a similar axial mobility with the natural tooth while keeping stress in the implant at safe levels. The in vitro mechanical testing of the prototype resulted in similar axial mobility predicted by the analysis and as that of a typical natural tooth. The abutment screw did not loosen under repeated loading and there was no static or fatigue failure.

  13. The adoption of new endodontic technology amongst Danish general dental practitioners

    DEFF Research Database (Denmark)

    Bjørndal, L.; Reit, C.

    2005-01-01

    adoption of technology, electronic apex locators, NiTi instruments, rubber dam, treatment sessions, warm gutta-percha......adoption of technology, electronic apex locators, NiTi instruments, rubber dam, treatment sessions, warm gutta-percha...

  14. Overview and challenges of molecular technologies in the veterinary microbiology laboratory.

    Science.gov (United States)

    Cunha, Mónica V; Inácio, João

    2015-01-01

    Terrestrial, aquatic, and aerial animals, either domestic or wild, humans, and plants all face similar health threats caused by infectious agents. Multifaceted anthropic pressure caused by an increasingly growing and resource-demanding human population has affected biodiversity at all scales, from the DNA molecule to the pathogen, to the ecosystem level, leading to species declines and extinctions and, also, to host-pathogen coevolution processes. Technological developments over the last century have also led to quantic jumps in laboratorial testing that have highly impacted animal health and welfare, ameliorated animal management and animal trade, safeguarded public health, and ultimately helped to "secure" biodiversity. In particular, the field of molecular diagnostics experienced tremendous technical progresses over the last two decades that significantly have contributed to our ability to study microbial pathogens in the clinical and research laboratories. This chapter highlights the strengths, weaknesses, opportunities, and threats (or challenges) of molecular technologies in the framework of a veterinary microbiology laboratory, in view of the latest advances.

  15. Application of failure mode and effect analysis in an assisted reproduction technology laboratory.

    Science.gov (United States)

    Intra, Giulia; Alteri, Alessandra; Corti, Laura; Rabellotti, Elisa; Papaleo, Enrico; Restelli, Liliana; Biondo, Stefania; Garancini, Maria Paola; Candiani, Massimo; Viganò, Paola

    2016-08-01

    Assisted reproduction technology laboratories have a very high degree of complexity. Mismatches of gametes or embryos can occur, with catastrophic consequences for patients. To minimize the risk of error, a multi-institutional working group applied failure mode and effects analysis (FMEA) to each critical activity/step as a method of risk assessment. This analysis led to the identification of the potential failure modes, together with their causes and effects, using the risk priority number (RPN) scoring system. In total, 11 individual steps and 68 different potential failure modes were identified. The highest ranked failure modes, with an RPN score of 25, encompassed 17 failures and pertained to "patient mismatch" and "biological sample mismatch". The maximum reduction in risk, with RPN reduced from 25 to 5, was mostly related to the introduction of witnessing. The critical failure modes in sample processing were improved by 50% in the RPN by focusing on staff training. Three indicators of FMEA success, based on technical skill, competence and traceability, have been evaluated after FMEA implementation. Witnessing by a second human operator should be introduced in the laboratory to avoid sample mix-ups. These findings confirm that FMEA can effectively reduce errors in assisted reproduction technology laboratories.

  16. RADBALL TECHNOLOGY TESTING IN THE SAVANNAH RIVER SITE HEALTH PHYSICS INSTRUMENT CALIBRATION LABORATORY

    Energy Technology Data Exchange (ETDEWEB)

    Farfan, E.

    2010-07-08

    The United Kingdom's National Nuclear Laboratory (NNL) has developed a radiation-mapping device that can locate and quantify radioactive hazards within contaminated areas of the nuclear industry. The device, known as RadBall{trademark}, consists of a colander-like outer collimator that houses a radiation-sensitive polymer sphere. The collimator has over two hundred small holes; thus, specific areas of the polymer sphere are exposed to radiation becoming increasingly more opaque in proportion to the absorbed dose. The polymer sphere is imaged in an optical-CT scanner that produces a high resolution 3D map of optical attenuation coefficients. Subsequent analysis of the optical attenuation data provides information on the spatial distribution of sources in a given area forming a 3D characterization of the area of interest. The RadBallTM technology has been deployed in a number of technology trials in nuclear waste reprocessing plants at Sellafield in the United Kingdom and facilities of the Savannah River National Laboratory (SRNL). This paper summarizes the tests completed at SRNL Health Physics Instrument Calibration Laboratory (HPICL).

  17. Dental photography today. Part 1: basic concepts

    Science.gov (United States)

    CASAGLIA, A.; DE DOMINICIS, P.; ARCURI, L.; GARGARI, M.; OTTRIA, L.

    2015-01-01

    SUMMARY This paper is the first article in a new series on digital dental photography. Part 1 defines the aims and objectives of dental photography for examination, diagnosis and treatment planning, legal and forensic documentation, publishing, education, marketing and communication with patients, dental team members, colleagues and dental laboratory. PMID:28042424

  18. Effectiveness and feasibility of utilizing E4D technology as a teaching tool in a preclinical dental education environment.

    Science.gov (United States)

    Callan, Richard S; Palladino, Christie L; Furness, Alan R; Bundy, Emily L; Ange, Brittany L

    2014-10-01

    Recent efforts have been directed towards utilizing CAD/CAM technology in the education of future dentists. The purpose of this pilot study was to investigate the feasibility of implementing CAD/CAM technology in instruction on preparing a tooth for restoration. Students at one dental school were assigned access to CAD/CAM technology vs. traditional preparation methods in a randomized, crossover design. In a convenience sample of a second-year class, seventy-six of the seventy-nine students volunteered to participate, for a response rate of 96 percent. Two analyses were performed on this pilot data: a primary effectiveness analysis comparing students' competency exam scores by intervention group (intention-to-treat analysis) and a secondary efficacy analysis comparing competency exam scores among students who reported using CAD/CAM versus those who did not. The effectiveness analysis showed no difference in outcomes by intervention group assignment. While student survey results indicated interest in utilizing the technology, the actual utilization rate was much less than one might anticipate, yielding a sample size that limited statistical power. The secondary analysis demonstrated higher mean competency exam scores for students reporting use of CAD/CAM compared to those who did not use the technology, but these results did not reach statistical significance (p=0.075). Prior research has investigated the efficacy of CAD/CAM in a controlled educational trial, but this study adds to the literature by investigating student use of CAD/CAM in a real-world, self-study fashion. Further studies should investigate ways in which to increase student utilization of CAD/CAM and whether or not increased utilization, with a larger sample size, would yield significant outcomes.

  19. An Experimental Study of Laboratory Hybrid Power System with the Hydrogen Technologies

    Directory of Open Access Journals (Sweden)

    Daniel Minarik

    2014-01-01

    Full Text Available This paper presents very small laboratory hybrid photovoltaic-hydrogen power system. The system was primarily assembled to verify the operability of the control algorithms and practical deployment of available commercial hydrogen technologies that are directly usable for storage of electricity produced from renewable energy sources in a small island system. This energetic system was installed and tested in Laboratory of fuel cells that is located in the university campus of VSB-Technical University of Ostrava. The energetic system consists of several basic components: a photovoltaic field, accumulators bank, water commercial electrolyzer and compact fuel cell system. The weather conditions recorded in two different weeks as model weather and solar conditions are used as case studies to test the energetic system and the results for two different cases are compared each other. The results show and illustrate selected behaviour curves of the power system and also average energy storage efficiency for accumulation subsystem based on hydrogen technologies or at the energetic system embedded components. On the basis of real measurement and its evaluation the ideal parameters of the photovoltaic field were calculated as well as the hydrogen technologies for supposed purpose and the power requirements.

  20. The path to the future: The role of science and technology at Argonne National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Reck, R.A.

    1996-04-30

    Today some scientists are concerned that present budget considerations in Washington will make it impossible for the US to maintain its preeminence in important areas of science and technology. In the private sector there has been a demise of substantive R & D efforts through most of the major industries. For DOE a lack of future support for science and technology would be an important issue because this could impact DOE`s abilities to solve problems in its major areas of concern, national security, energy, environment. In fact some scientists maintain that were the present trend to continue unabated it could lead to a national security issue. Preeminence in science and technology plays a critical role in our nation`s position as the leader of world democracy. In contrast with this point of view of gloom and doom, however, in this presentation I hope to bring to you what I see as an exciting message of good news. Today I will list the important opportunities and challenges for the future that I note for ANL, the leadership role that I believe ANL can play and the qualities that will help our laboratory to maintain its status as an outstanding DOE National Laboratory.

  1. Dental implants of TiTa30 produced by powder technology

    Energy Technology Data Exchange (ETDEWEB)

    Wack, T.; Biehl, V.; Breme, J. [Universitaet des Saarlandes, Saarbruecken (Germany). Lehrstuhl fuer Metallische Werkstoffe; Schwanke, C.; Schaeffer, L.

    1999-07-01

    The production and the mechanical properties of porous parts of the biocompatible titanium alloy TiTa30 produced via powder metallurgy are described. The aim of the study was to create endosseous dental implants with a low Young`s modulus and a porous surface, which will result in a good load transfer from the implant to the bone thus stimulating the formation of new bone and ultimately by the ingrowth of bone into the surface of the implant lead to a good anchorage in the bone. Other applications of such porous parts might be bearings or filters. The new alloy TiTa30 was melted in an electric-arc furnace in a water-cooled mould in an argon atmosphere and then powdered by the hydrogenation - dehydrogenation (HDH)-process. Samples were produced by unidirectional pressing and then sintering of the green bodies under vacuum. The influence of the sintering parameters (particle size, compacting pressure, sintering time and temperature) on the mechanical properties was investigated. While the Young`s modulus and the yield strength varied only with the resulting porosity, the fatigue strength of the samples also depended on the particle size and the sintering temperature and time. It was possible to produce samples with a Young`s modulus comparable to that of bone and a fatigue strength high enough for use as a dental implant. In addition to the mechanical testing the functionality of the implants (bone ingrowth and implant anchorage) was tested in-vivo in animal experiments. (orig.) 5 refs.

  2. FEATURES OF TECHNOLOGIES CREATE INTERACTIVE ELECTRONIC DOCUMENT FOR SUPPORT OF LABORATORY PRACTICAL PHYSICS

    Directory of Open Access Journals (Sweden)

    Mykola A. Meleshko

    2014-02-01

    Full Text Available The article discusses the content of the «flash-book» construct, defining its properties and possible components. There are presented some examples of components programming steps of “authoring flash – book”, considered the possibility of using such an electronic document to optimize the learning process at the Technical University in the performance of laboratory training on general physics. The technique of its using to provide individualized approach to learning and the use of various experimental base from classical to digital equipment laboratories is proposed. It was carried out the analysis of ways to improve such interactive electronic document for the development of information technology competence of engineering students.

  3. ESTABLISHMENT OF AN ENVIRONMENTAL CONTROL TECHNOLOGY LABORATORY WITH A CIRCULATING FLUIDIZED-BED COMBUSTION SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Wei-Ping Pan; Andy Wu; John T. Riley

    2004-10-30

    This report is to present the progress made on the project ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the period July 1, 2004 through September 30, 2004. The following tasks have been completed. First, renovation of the new Combustion Laboratory and the construction of the Circulating Fluidized-Bed (CFB) Combustor Building have started. Second, the design if the component parts of the CFBC system have been reviewed and finalized so that the drawings may be released to the manufacturers during the next quarter. Third, the experiments for solid waste (chicken litter) incineration have been conducted using a Thermogravimetric Analyzer (TGA). This is in preparation for testing in the simulated fluidized-bed combustor. The experimental results from this study are presented in this report. Finally, the proposed work for the next quarter has been outlined in this report.

  4. National Research Council Research Associateships Program with Methane Hydrates Fellowships Program/National Energy Technology Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Basques, Eric O. [National Academy of Sciences, Washington, DC (United States)

    2014-03-20

    This report summarizes work carried out over the period from July 5, 2005-January 31, 2014. The work was carried out by the National Research Council Research Associateships Program of the National Academies, under the US Department of Energy's National Energy Technology Laboratory (NETL) program. This Technical Report consists of a description of activity from 2005 through 2014, broken out within yearly timeframes, for NRC/NETL Associateships researchers at NETL laboratories which includes individual tenure reports from Associates over this time period. The report also includes individual tenure reports from associates over this time period. The report also includes descriptions of program promotion efforts, a breakdown of the review competitions, awards offered, and Associate's activities during their tenure.

  5. Establishing benchmarks and metrics for disruptive technologies, inappropriate and obsolete tests in the clinical laboratory.

    Science.gov (United States)

    Kiechle, Frederick L; Arcenas, Rodney C; Rogers, Linda C

    2014-01-01

    Benchmarks and metrics related to laboratory test utilization are based on evidence-based medical literature that may suffer from a positive publication bias. Guidelines are only as good as the data reviewed to create them. Disruptive technologies require time for appropriate use to be established before utilization review will be meaningful. Metrics include monitoring the use of obsolete tests and the inappropriate use of lab tests. Test utilization by clients in a hospital outreach program can be used to monitor the impact of new clients on lab workload. A multi-disciplinary laboratory utilization committee is the most effective tool for modifying bad habits, and reviewing and approving new tests for the lab formulary or by sending them out to a reference lab. Copyright © 2013 Elsevier B.V. All rights reserved.

  6. A panorama of dental CAD/CAM restorative systems.

    Science.gov (United States)

    Liu, Perng-Ru

    2005-07-01

    In the last 2 decades, exciting new developments in dental materials and computer technology have led to the success of contemporary dental computer-aided design/computer-aided manufacturing (CAD/CAM) technology. Several highly sophisticated chairside and laboratory CAD/CAM systems have been introduced or are under development. This article provides an overview of the development of various CAD/CAM systems. Operational components, methodologies, and restorative materials used with common CAD/CAM systems are discussed. Research data and clinical studies are presented to substantiate the clinical performance of these systems.

  7. Panorama of dental CAD/CAM restorative systems.

    Science.gov (United States)

    Liu, Perng-Ru; Essig, Milton E

    2008-10-01

    In the past two decades, exciting new developments in dental materials and computer technology have led to the success of contemporary dental computer-aided design/computer-aided manufacture (CAD/CAM) technology. Several highly sophisticated in-office and laboratory CAD/CAM systems have been introduced or are under development. This article provides an overview of the development of various CAD/CAM systems. Operational components, methodologies, and restorative materials used with common CAD/CAM systems are discussed. Research data and clinical studies are presented to substantiate the clinical performance of these systems.

  8. Dental Implant Systems

    Science.gov (United States)

    Oshida, Yoshiki; Tuna, Elif B.; Aktören, Oya; Gençay, Koray

    2010-01-01

    Among various dental materials and their successful applications, a dental implant is a good example of the integrated system of science and technology involved in multiple disciplines including surface chemistry and physics, biomechanics, from macro-scale to nano-scale manufacturing technologies and surface engineering. As many other dental materials and devices, there are crucial requirements taken upon on dental implants systems, since surface of dental implants is directly in contact with vital hard/soft tissue and is subjected to chemical as well as mechanical bio-environments. Such requirements should, at least, include biological compatibility, mechanical compatibility, and morphological compatibility to surrounding vital tissues. In this review, based on carefully selected about 500 published articles, these requirements plus MRI compatibility are firstly reviewed, followed by surface texturing methods in details. Normally dental implants are placed to lost tooth/teeth location(s) in adult patients whose skeleton and bony growth have already completed. However, there are some controversial issues for placing dental implants in growing patients. This point has been, in most of dental articles, overlooked. This review, therefore, throws a deliberate sight on this point. Concluding this review, we are proposing a novel implant system that integrates materials science and up-dated surface technology to improve dental implant systems exhibiting bio- and mechano-functionalities. PMID:20480036

  9. Dental Implant Systems

    Directory of Open Access Journals (Sweden)

    Yoshiki Oshida

    2010-04-01

    Full Text Available Among various dental materials and their successful applications, a dental implant is a good example of the integrated system of science and technology involved in multiple disciplines including surface chemistry and physics, biomechanics, from macro-scale to nano-scale manufacturing technologies and surface engineering. As many other dental materials and devices, there are crucial requirements taken upon on dental implants systems, since surface of dental implants is directly in contact with vital hard/soft tissue and is subjected to chemical as well as mechanical bio-environments. Such requirements should, at least, include biological compatibility, mechanical compatibility, and morphological compatibility to surrounding vital tissues. In this review, based on carefully selected about 500 published articles, these requirements plus MRI compatibility are firstly reviewed, followed by surface texturing methods in details. Normally dental implants are placed to lost tooth/teeth location(s in adult patients whose skeleton and bony growth have already completed. However, there are some controversial issues for placing dental implants in growing patients. This point has been, in most of dental articles, overlooked. This review, therefore, throws a deliberate sight on this point. Concluding this review, we are proposing a novel implant system that integrates materials science and up-dated surface technology to improve dental implant systems exhibiting bio- and mechano-functionalities.

  10. Accelerating technology transfer from federal laboratories to the private sector by industrial R and D collaborations - A new business model

    Energy Technology Data Exchange (ETDEWEB)

    LOMBANA,CESAR A.; ROMIG JR.,ALTON D.; LINTON,JONATHAN D.; MARTINEZ,J. LEONARD

    2000-04-13

    Many important products and technologies were developed in federal laboratories and were driven initially by national needs and for federal applications. For example, the clean room technology that enhanced the growth of the semiconductor industry was developed at Sandia National Laboratories (SNL) decades ago. Similarly, advances in micro-electro-mechanical-systems (MEMS)--an important set of process technologies vital for product miniaturization--are occurring at SNL. Each of the more than 500 federal laboratories in the US, are sources of R and D that contributes to America's economic vitality, productivity growth and, technological innovation. However, only a fraction of the science and technology available at the federal laboratories is being utilized by industry. Also, federal laboratories have not been applying all the business development processes necessary to work effectively with industry in technology commercialization. This paper addresses important factors that federal laboratories, federal agencies, and industry must address to translate these under utilized technologies into profitable products in the industrial sector.

  11. Understanding dental CAD/CAM for restorations--dental milling machines from a mechanical engineering viewpoint. Part B: labside milling machines.

    Science.gov (United States)

    Lebon, Nicolas; Tapie, Laurent; Duret, Francois; Attal, Jean-Pierre

    2016-01-01

    Nowadays, dental numerical controlled (NC) milling machines are available for dental laboratories (labside solution) and dental production centers. This article provides a mechanical engineering approach to NC milling machines to help dental technicians understand the involvement of technology in digital dentistry practice. The technical and economic criteria are described for four labside and two production center dental NC milling machines available on the market. The technical criteria are focused on the capacities of the embedded technologies of milling machines to mill prosthetic materials and various restoration shapes. The economic criteria are focused on investment cost and interoperability with third-party software. The clinical relevance of the technology is discussed through the accuracy and integrity of the restoration. It can be asserted that dental production center milling machines offer a wider range of materials and types of restoration shapes than labside solutions, while labside solutions offer a wider range than chairside solutions. The accuracy and integrity of restorations may be improved as a function of the embedded technologies provided. However, the more complex the technical solutions available, the more skilled the user must be. Investment cost and interoperability with third-party software increase according to the quality of the embedded technologies implemented. Each private dental practice may decide which fabrication option to use depending on the scope of the practice.

  12. [Rational choice of technologies and equipment in the logistic support of a pathomorphology laboratory].

    Science.gov (United States)

    Mal'kov, P G; Frank, G A; Sidorova, V P

    2010-01-01

    The purpose of the present communication is to provide specialists with the comparative characteristics of the most important user qualities of the major histological labware by the world's leading manufacturers introduced on the market. These are comparatively estimated solely from technologically significant criteria on the basis of the materials of open references, general public technical documents, and the authors' experience. Fabric processors, embedding complexes, microtomes, autostainers, and coverslippers are comparatively characterized from the viewpoint of a practical user. The presented materials may be useful to specialties to take decisions on logistics and re-equipment of morphological laboratories.

  13. Magnet Science and Technology for Basic Research at the High Field Laboratory for Superconducting Materials

    Institute of Scientific and Technical Information of China (English)

    渡辺和雄

    2007-01-01

    Since the first practical cryocooled superconducting magnet using a GM-cryocooler and high temperature superconducting current leads has been demonstrated successfully at the High Field Laboratory for Superconducting Materials (HFLSM), various kinds of cryocooled superconducting magnets in fields up to 15 T have been used to provide access for new research areas in fields of magneto-science. Recently, the HFLSM has succeeded in demonstrating a cryocooed 18 T high temperature superconducting magnet and a high field cryocooled 27.5 T hybrid magnet. Cryocooled magnet technology and basic research using high field magnets at the HFLSM are introduced.

  14. Nanotechnology Laboratory Continues Partnership with FDA and National Institute of Standards and Technology | Poster

    Science.gov (United States)

    The NCI-funded Nanotechnology Characterization Laboratory (NCL)—a leader in evaluating promising nanomedicines to fight cancer—recently renewed its collaboration with the U.S. Food and Drug Administration (FDA) and the National Institute of Standards and Technology (NIST) to continue its groundbreaking work on characterizing nanomedicines and moving them toward the clinic. In partnership with NIST and the FDA, NCL has laid a solid, scientific foundation for using the power of nanotechnology to increase the potency and target the delivery

  15. The Los Alamos, Sandia, and Livermore Laboratories: Integration and collaboration solving science and technology problems for the nation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-01

    More than 40 years ago, three laboratories were established to take on scientific responsibility for the nation`s nuclear weapons - Los Alamos, Sandia, and Livermore. This triad of laboratories has provided the state-of-the-art science and technology to create America`s nuclear deterrent and to ensure that the weapons are safe, secure, and to ensure that the weapons are safe, secure, and reliable. These national security laboratories carried out their responsibilities through intense efforts involving almost every field of science, engineering, and technology. Today, they are recognized as three of the world`s premier research and development laboratories. This report sketches the history of the laboratories and their evolution to an integrated three-laboratory system. The characteristics that make them unique are described and some of the major contributions they have made over the years are highlighted.

  16. Establishment of an Environmental Control Technology Laboratory with a Circulating Fluidized-Bed Combustion System

    Energy Technology Data Exchange (ETDEWEB)

    Wei-Ping Pan; Yan Cao; Songgeng Li

    2006-04-01

    This report is to present the progress made on the project ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the period January 1, 2006 through March 31, 2006. Work was performed on the following activities. First, the fabrication and manufacture of the CFBC Facility were completed. The riser, primary cyclone and secondary cyclone of Circulating Fluidized Bed (CFB) Combustor have been erected. Second, the Mercury Control Workshop and the Grand Opening of Institute for Combustion Science and Environmental Technology (ICSET) were successfully held on February 22 and 23, 2006, respectively. Third, effects of hydrogen chlorine (HCl) and sulfur dioxide (SO{sub 2}) on mercury oxidation were studied in a drop tube reactor. The experimental results from this study are presented in this report. Finally, the proposed work for the next quarter is described in this report.

  17. REDUCING FIBER LOSS IN LABORATORY-AND MILL-SCALE FLOTATION DEINKING USING SURFACTANT SPRAY TECHNOLOGY

    Institute of Scientific and Technical Information of China (English)

    Greg.DeLozier; YulinZhao; YulinDeng; DavidWhite; JunyongZhu; MarkPrein

    2004-01-01

    As the cost of quality waste paper continues to escalate in response tofor the finite resource,an increased global demand loss of saleable fiber within flotation rejects becomes both environmentally and economically unacceptable. The ability of surfactant spray technology to reduce yield loss without detriment to pulp brightness gains has been demonstrated during both laboratory-and pilot-scale flotation deinking investigations. This paper documents the successful transfer of this technology to a single flotation unit within the deinking line of a mill producing newsprint from 100% secondary fiber. Initial results suggest that the loss of fiber across the unit may be reduced by more than 50% without obvious detriment to final pulp quality.

  18. REDUCING FIBER LOSS IN LABORATORY- AND MILL-SCALE FLOTATION DEINKING USING SURFACTANT SPRAY TECHNOLOGY

    Institute of Scientific and Technical Information of China (English)

    Greg. DeLozier; Yulin Zhao; Yulin Deng; David White; Junyong Zhu; Mark Prein

    2004-01-01

    As the cost of quality waste paper continues to escalate in response to an increased global demand for the finite resource, loss of saleable fiber within flotation rejects becomes both environmentally and economically unacceptable. The ability of surfactant spray technology to reduce yield loss without detriment to pulp brightness gains has been demonstrated during both laboratory- and pilot-scale flotation deinking investigations. This paper documents the successful transfer of this technology to a single flotation unit within the deinking line of a mill producing newsprint from 100% secondary fiber. Initial results suggest that the loss of fiber across the unit may be reduced by more than 50%without obvious detriment to final pulp quality.

  19. Energy Saving Separations Technologies for the Petroleum Industry: An Industry-University-National Laboratory Research Partnership

    Energy Technology Data Exchange (ETDEWEB)

    Dorgan, John R.; Stewart, Frederick F.; Way, J. Douglas

    2003-03-28

    This project works to develop technologies capable of replacing traditional energy-intensive distillations so that a 20% improvement in energy efficiency can be realized. Consistent with the DOE sponsored report, Technology Roadmap for the Petroleum Industry, the approach undertaken is to develop and implement entirely new technology to replace existing energy intensive practices. The project directly addresses the top priority issue of developing membranes for hydrocarbon separations. The project is organized to rapidly and effectively advance the state-of-the-art in membranes for hydrocarbon separations. The project team includes ChevronTexaco and BP, major industrial petroleum refiners, who will lead the effort by providing matching resources and real world management perspective. Academic expertise in separation sciences and polymer materials found in the Chemical Engineering and Petroleum Refining Department of the Colorado School of Mines is used to invent, develop, and test new membrane materials. Additional expertise and special facilities available at the Idaho National Engineering and Environmental Laboratory (INEEL) are also exploited in order to effectively meet the goals of the project. The proposed project is truly unique in terms of the strength of the team it brings to bear on the development and commercialization of the proposed technologies.

  20. Argonne National Laboratory study of the transfer of federal computational technology to manufacturing industry in the State of Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, C.J.

    1991-11-01

    This report describes a pilot study to develop, initiate the implementation, and document a process to identify computational technology capabilities resident within Argonne National Laboratory to small and medium-sized businesses in the State of Michigan. It is a derivative of a program entitled ``Technology Applications Development Process for the State of Michigan`` undertaken by the Industrial Technology Institute and MERRA under funding from the National Institute of Standards and Technology. The overall objective of the latter program is to develop procedures which can facilitate the discovery and commercialization of new technologies for the benefit of small and medium-size manufacturing firms. Federal laboratories such as Argonne, along with universities, have been identified by the Industrial Technology Institute as key sources of technology which can be profitably commercialized by the target firms. The scope of this study limited the investigation of technology areas for technology transfer to that of computational science and engineering featuring high performance computing. This area was chosen as the broad technological capability within Argonne to investigate for technology transfer to Michigan firms for several reasons. First, and most importantly, as a multidisciplinary laboratory, Argonne has the full range of scientific and engineering skills needed to utilize leading-edge computing capabilities in many areas of manufacturing.

  1. Argonne National Laboratory study of the transfer of federal computational technology to manufacturing industry in the State of Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, C.J.

    1991-11-01

    This report describes a pilot study to develop, initiate the implementation, and document a process to identify computational technology capabilities resident within Argonne National Laboratory to small and medium-sized businesses in the State of Michigan. It is a derivative of a program entitled Technology Applications Development Process for the State of Michigan'' undertaken by the Industrial Technology Institute and MERRA under funding from the National Institute of Standards and Technology. The overall objective of the latter program is to develop procedures which can facilitate the discovery and commercialization of new technologies for the benefit of small and medium-size manufacturing firms. Federal laboratories such as Argonne, along with universities, have been identified by the Industrial Technology Institute as key sources of technology which can be profitably commercialized by the target firms. The scope of this study limited the investigation of technology areas for technology transfer to that of computational science and engineering featuring high performance computing. This area was chosen as the broad technological capability within Argonne to investigate for technology transfer to Michigan firms for several reasons. First, and most importantly, as a multidisciplinary laboratory, Argonne has the full range of scientific and engineering skills needed to utilize leading-edge computing capabilities in many areas of manufacturing.

  2. The influence of technology on reflective learning in dental hygiene education.

    Science.gov (United States)

    Hanson, Kami; Alexander, Susan

    2010-06-01

    The role of reflection in the learning process is essential to drive a meaningful experience for the student. Educators have recognized this concept and continue to research the impact of reflection on learning. The purpose of this research project was to investigate the level of reflection that takes place when students use two different types of media for reflective journaling: hard copy vs. electronic. Journal data, both hard copy and electronic, were gathered from groups of university dental hygiene students. As part of regular course requirements, students were assigned to maintain a reflective journal regarding their clinical experiences. Written data were evaluated using a rubric and coding scheme to determine the levels of reflective thinking evidenced in student journals for both media. Researchers applied qualitative methods to analyze the textual content and/or discourse using a constant comparative, "counting and coding" approach. Results were analyzed and presented as comparisons of descriptive statistics between student group and with qualitative discourse. The evidence suggests that the electronic format of journaling influenced the students' ability to engage in reflective thinking and action, as well as develop higher levels of critical thinking skills.

  3. Reducing cognitive load in the chemistry laboratory by using technology-driven guided inquiry experiments

    Science.gov (United States)

    Hubacz, Frank, Jr.

    The chemistry laboratory is an integral component of the learning experience for students enrolled in college-level general chemistry courses. Science education research has shown that guided inquiry investigations provide students with an optimum learning environment within the laboratory. These investigations reflect the basic tenets of constructivism by engaging students in a learning environment that allows them to experience what they learn and to then construct, in their own minds, a meaningful understanding of the ideas and concepts investigated. However, educational research also indicates that the physical plant of the laboratory environment combined with the procedural requirements of the investigation itself often produces a great demand upon a student's working memory. This demand, which is often superfluous to the chemical concept under investigation, creates a sensory overload or extraneous cognitive load within the working memory and becomes a significant obstacle to student learning. Extraneous cognitive load inhibits necessary schema formation within the learner's working memory thereby impeding the transfer of ideas to the learner's long-term memory. Cognitive Load Theory suggests that instructional material developed to reduce extraneous cognitive load leads to an improved learning environment for the student which better allows for schema formation. This study first compared the cognitive load demand, as measured by mental effort, experienced by 33 participants enrolled in a first-year general chemistry course in which the treatment group, using technology based investigations, and the non-treatment group, using traditional labware, investigated identical chemical concepts on five different exercises. Mental effort was measured via a mental effort survey, a statistical comparison of individual survey results to a procedural step count, and an analysis of fourteen post-treatment interviews. Next, a statistical analysis of achievement was

  4. ESTABLISHMENT OF AN ENVIRONMENTAL CONTROL TECHNOLOGY LABORATORY WITH A CIRCULATING FLUIDIZED-BED COMBUSTION SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Wei-Ping Pan; Andy Wu; John T. Riley

    2005-04-30

    This report is to present the progress made on the project ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the period January 1, 2005 through March 31, 2005. The following tasks have been completed. First, the renovation of the new Combustion Laboratory is nearly complete, and the construction of the Circulating Fluidized-Bed (CFB) Combustor Building is in the final stages. Second, the fabrication and manufacture of the CFBC Facility is being discussed with a potential contractor. Discussions with potential contactor regarding the availability of materials and current machining capabilities have resulted in the modification of the original designs. The selection of the fabrication contractor for the CFBC Facility is expected during the next quarter. Third, co-firing experiments conducted with coal and chicken waste have been initiated in the laboratory-scale simulated fluidized-bed facility. The experimental results from this study are presented in this report. Finally, the proposed work for the next quarter is described in this report.

  5. Computerized Laboratory in Science and Technology Teaching: Course in Machine Elements

    Directory of Open Access Journals (Sweden)

    Ivan KOLAROV

    2005-04-01

    Full Text Available The computer registration of physical and mechanical quantities gives a lot of possibilities for machine elements and mechanisms research. The advantages of well-organized computer laboratory both technical and methodological are namely: registration and on-line observation of a number of processes with random speed; replacement of high-cost specialized laboratory equipment; mathematical data processing; solving educational problems by modern technologies. The purpose of this paper is to present the results of implementation of universal computer system for registering physical and mechanical quantities of elastic coupling, prepared in the laboratory of Machine Elements at the Higher School of Transport, Sofia, Bulgaria. The results are obtained by a special stand and the quantities are registered by a universal interface and software. After mathematical processing a number of characteristics and properties important for practice, such as diagram of friction and dumping in the coupling, shaft angle speed, etc. have been obtained. The interface and software used allow to students to make the electrical scheme of measuring by them, to acquire basic knowledge for the problem investigated and to acquire self-confidence of solving such problems in practice.

  6. ESTABLISHMENT OF AN ENVIRONMENTAL CONTROL TECHNOLOGY LABORATORY WITH A CIRCULATING FLUIDIZED-BED COMBUSTION SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Wei-Ping Pan; Andy Wu; John T. Riley

    2005-07-30

    This purpose of this report is to present the progress made on the project ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the period April 1, 2005 through June 30, 2005. The following tasks have been completed. First, the new Combustion Laboratory was occupied on June 15, 2005, and the construction of the Circulating Fluidized-Bed (CFB) Combustor Building is in the final painting stage. Second, the fabrication and manufacturing contract for the CFBC Facility was awarded to Sterling Boiler & Mechanical, Inc. of Evansville, Indiana. Sterling is manufacturing the assembly and component parts of the CFBC system. The erection of the CFBC system is expected to start September 1, 2005. Third, mercury emissions from the cofiring of coal and chicken waste was studied experimentally in the laboratory-scale simulated fluidized-bed combustion facility. The experimental results from this study are presented in this report. Finally, the proposed work for the next quarter is described.

  7. A Comparison of Dental Chartings Performed at the Joint POW/MIA Accounting Command Central Identification Laboratory and the Kokura Central Identification Unit on Remains Identified from the Korean War.

    Science.gov (United States)

    Shiroma, Calvin Y

    2016-01-01

    During the Korean War, the Office of the Quartermaster General's Graves Registration Service (GRS) was responsible for the recovery, processing, identification, and repatriation of US remains. In January 1951, the GRS established a Central Identification Unit (CIU) at Kokura, Japan. At the Kokura CIU, postmortem dental examinations were performed by the dental technicians. Thirty-nine postmortem dental examinations performed at the CIU were compared to the findings documented in the Forensic Odontology Reports written at the JPAC Central Identification Laboratory (CIL). Differences were noted in 20 comparisons (51%). The majority of the discrepancies was considered negligible and would not alter the JPAC decision to disinter a set of unknown remains. Charting discrepancies that were considered significant included the occasional failure of the Kokura technicians to identify teeth with inter-proximal or esthetic restorations and the misidentification of a mechanically prepared tooth (i.e., tooth prepared for a restoration) as a carious surface.

  8. NASA's Corrosion Technology Laboratory at the Kennedy Space Center: Anticipating, Managing, and Preventing Corrosion

    Science.gov (United States)

    Calle, Luz Marina

    2014-01-01

    Corrosion is the degradation of a material that results from its interaction with the environment. The marine environment at NASAs Kennedy Space Center (KSC) has been documented by ASM International (formerly American Society for Metals) as the most corrosive in the United States. With the introduction of the Space Shuttle in 1981, the already highly corrosive conditions at the launch pads were rendered even more severe by the 70 tons of highly corrosive hydrochloric acid that were generated by the solid rocket boosters. Numerous failures at the launch pads are caused by corrosion.The structural integrity of ground infrastructure and flight hardware is critical to the success, safety, cost, and sustainability of space missions. As a result of fifty years of experience with launch and ground operations in a natural marine environment that is highly corrosive, NASAs Corrosion Technology Laboratory at KSC is a major source of corrosion control expertise in the launch and other environments. Throughout its history, the Laboratory has evolved from what started as an atmospheric exposure facility near NASAs launch pads into a world-wide recognized capability that provides technical innovations and engineering services in all areas of corrosion for NASA and external customers.This presentation will provide a historical overview of the role of NASAs Corrosion Technology in anticipating, managing, and preventing corrosion. One important challenge in managing and preventing corrosion involves the detrimental impact on humans and the environment of what have been very effective corrosion control strategies. This challenge has motivated the development of new corrosion control technologies that are more effective and environmentally friendly. Strategies for improved corrosion protection and durability can have a huge impact on the economic sustainability of human spaceflight operations.

  9. Dental Holography

    Science.gov (United States)

    Dirtoft, Ingegerd

    1983-12-01

    Ten years have passed since the first articles appeared in this new field. The qualities of the laser light together with the need of contactless 3-D measurements for different dental purposes seemed to be extremely promising, but still just a few scientists have used the method and mostly for laboratory studies. For some reason there has been a preponderance for orthodontic measurements. This seems to be a bit peculiar from holographic view compared with measurements for engineering purposes, which usually are made on metals. So naturally holography can become a clinical tool for measurements in the field of fixed bridges, removable partial dentures and implants. One of the problems is that the need for holography in dental research must be fulfilled in collaboration with physicists. Only a two-way communication during an entire experiment can balance both technical and odontological demands and thus give practical and clinical important results. The need for an easy way of handling the evaluation to get all required information is another problem and of course the holographic equipment must be converted to a box easy to handle for everyone. At last the position of dental holography today is going to be carefully examined together with an attempt to look into the hopefully exciting and not to utopic future for this research field.

  10. Color changing in denture base polyamide 12 and polyamide microcrystalline after polishing in laboratory and dental clinic

    Science.gov (United States)

    Sari, N. M. G. A. W.; Fardaniah, S.; Masulili, C.

    2017-08-01

    This study’s purpose was to compare color changes from polyamide 12 and polyamide microcrystalline materials. Each material was divided into two groups, polished with laboratory and clinical polishing equipment, and then immersed in a 28 °C coffee solution for seven days. Surface roughness was measured with a profilometer before the immersion. Color (L*, a*, and b*) was measured using a spectrophotometer before and after immersion. There were no significant color changes in the polyamide 12 and polyamide microcrystalline materials after immersion in the coffee solution.

  11. Laboratory demonstration of a primary active mirror for space with the LATT: large aperture telescope technology

    Science.gov (United States)

    Briguglio, Runa; Biasi, Roberto; Gallieni, Daniele; Vettore, Christian; d'Amato, Francesco; Xompero, Marco; Arcidiacono, Carmelo; Lisi, Franco; Riccardi, Armando; Patauner, Christian; Lazzarini, Paolo; Tintori, Matteo; Duò, Fabrizio; Pucci, Mauro; Zuccaro Marchi, Alessandro; Maresi, Luca

    2016-07-01

    The LATT project is an ESA contract under TRP programme to demonstrate the scalability of the technology from ground-based adaptive mirrors to space active primary mirrors. A prototype spherical mirror based on a 40 cm diameter 1 mm thin glass shell with 19 contactless, voice-coil actuators and co-located position sensors have been manufactured and integrated into a final unit with an areal density lower than 20 kg/m2. Laboratory tests demonstrated the controllability with very low power budget and the survival of the fragile glass shell exposed to launch accelerations, thanks to an electrostatic locking mechanism; such achievements pushes the technology readiness level toward 5. With this prototype, the LATT project explored the feasibility of using an active and lightweight primary for space telescopes. The concept is attractive for large segmented telescopes, with surface active control to shape and co-phase them once in flight. In this paper we will describe the findings of the technological advances and the results of the environmental and optical tests.

  12. Factors influencing the dimensional accuracy of 3D-printed full-coverage dental restorations using stereolithography technology

    NARCIS (Netherlands)

    Alharbi, N.; Osman, R.B.; Wismeijer, D.

    2016-01-01

    Purpose: The aim of the present study was to evaluate the effect of the build angle and the support configuration (thick versus thin support) on the dimensional accuracy of 3D-printed full-coverage dental restorations. Materials and Methods: A full-coverage dental crown was digitally designed and

  13. Cytotoxicity of low-shrink composites with new monomer technology on bovine dental pulp-derived cells.

    Science.gov (United States)

    Yalcin, M; Ahmetoglu, F; Sisman, R; Bozkurt, Bs; Hakki, Ss

    2015-01-01

    The aim of this study was to evaluate the cytotoxicity of four low-shrink composites with new monomer technology on the bovine dental pulp-derived cells (bDPCs). Ten samples were prepared for each group composites, and the samples were immersed in 7 mL of culture medium for 72 h at 37°C to extract residual monomer or cytotoxic substances. The culture medium containing the material extracts was sterile filtered for use on the cell cultures. Materials were incubated in medium with serum for 72 h. bDPCs were maintained in a medium with serum. A real-time cell analyzer was used to evaluate cell survival. After seeding 200 mL of the cell suspensions into the wells (10,000 cells/well) of the E-plate 96, bDPCs were treated with bioactive components released by the composite materials (1:1 and 1:2 dilutions) and monitored every 15 min for 50 h. According to analysis of variance, there were significant differences between the cell indexes of the control and GC kalore (p composites resins are being advanced, their cytotoxic effects have been proceeding till this time. However, two of the four materials tested significantly reduced cell viability when compared with control. Research should focus on the cytotoxicity of composites in addition to their mechanical properties. © The Author(s) 2014.

  14. Engineering Technology Reports, Volume 1: Laboratory Directed Research and Development FY00

    Energy Technology Data Exchange (ETDEWEB)

    Baron, A L; Langland, R T; Minichino, C

    2001-10-03

    In FY-2000, Engineering at Lawrence Livermore National Laboratory faced significant pressures to meet critical project milestones, and immediate demands to facilitate the reassignment of employees as the National Ignition Facility (the 600-TW laser facility being designed and built at Livermore, and one of the largest R&D construction projects in the world) was in the process of re-baselining its plan while executing full-speed its technology development efforts. This drive for change occurred as an unprecedented level of management and program changes were occurring within LLNL. I am pleased to report that we met many key milestones and achieved numerous technological breakthroughs. This report summarizes our efforts to perform feasibility and reduce-to-practice studies, demonstrations, and/or techniques--as structured through our technology centers. Whether using computational engineering to predict how giant structures like suspension bridges will respond to massive earthquakes or devising a suitcase-sized microtool to detect chemical and biological agents used by terrorists, we have made solid technical progress. Five Centers focus and guide longer-term investments within Engineering, as well as impact all of LLNL. Each Center is responsible for the vitality and growth of the core technologies it represents. My goal is that each Center will be recognized on an international scale for solving compelling national problems requiring breakthrough innovation. The Centers and their leaders are as follows: Center for Complex Distributed Systems--David B. McCallen; Center for Computational Engineering--Kyran D. Mish; Center for Microtechnology--Raymond P. Mariella, Jr.; Center for Nondestructive Characterization--Harry E. Martz, Jr.; and Center for Precision Engineering--Keith Carlisle.

  15. A pilot study to assess the feasibility and accuracy of using haptic technology to occlude digital dental models.

    Science.gov (United States)

    Wu, Wen; Cen, Yuhai; Hong, Yang; Keeling, Andrew; Khambay, Balvinder

    2016-03-01

    The use of haptic technology as an adjunct to clinical teaching is well documented in medicine and dentistry. However its application in clinical patient care is less well documented. The aim of this pilot study was to determine the feasibility and accuracy of using a haptic device to determine the occlusion of virtual dental models. The non-occluded digital models of 20 pre-treatment individuals were chosen from the database of Faculty of Dentistry, The University of Hong Kong. Following minimal training with the haptic device (Geomagic(®) Touch™), the upper model was occluded with the lower model until a stable occlusion was achieved. Seven landmarks were placed on each of the corners of the original and haptically aligned upper model bases. The absolute distance between the landmarks was calculated. Intra- and inter-operator errors were assessed. The absolute distance between the 7 landmarks for each original and corresponding haptically aligned model was 0.54 ± 0.40 mm in the x-direction (lateral), 0.73 ± 0.63 mm in the y-direction (anterior-posterior) and 0.55 ± 0.48 mm in the z-direction (inferior-superior). Based on initial collision detection to prevent interpenetration of the upper and lower digital model surfaces, and contact form resistance during contact, it is possible to use a haptic device to occlude digital study models. The use of 3D digital study models is routine, but new problems arise, such as the lack of "touch" in a virtual environment. Occluding study models requires the sense of touch. For the first time, using haptic technology, it is possible to occlude digital study models in a virtual environment. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Laboratories for the 21st Century: Case Studies; National Renewable Energy Laboratory, Science and Technology Facility, Golden, Colorado (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    Van Geet, O.

    2010-04-01

    As a Laboratories for the 21st Century (Labs21) partner, NREL set aggressive goals for energy savings, daylighting, and achieving a LEED Gold rating (through the U.S. Green Building Council's Leadership in Energy and Environmental Design program) for its S&TF building.

  17. Quality management system and accreditation of the in vivo monitoring laboratory at Karslruhe Institute of Technology.

    Science.gov (United States)

    Breustedt, B; Mohr, U; Biegard, N; Cordes, G

    2011-03-01

    The in vivo monitoring laboratory (IVM) at Karlsruhe Institute of Technology (KIT), with one whole body counter and three partial-body counters, is an approved lab for individual monitoring according to German regulation. These approved labs are required to prove their competencies by accreditation to ISO/IEC 17025:2005. In 2007 a quality management system (QMS), which was successfully audited and granted accreditation, was set up at the IVM. The system is based on the ISO 9001 certified QMS of the central safety department of the Research Centre Karlsruhe the IVM belonged to at that time. The system itself was set up to be flexible and could be adapted to the recent organisational changes (e.g. founding of KIT and an institute for radiation research) with only minor effort.

  18. The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2002

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory

    2003-10-30

    This Site Environmental Report was prepared by the Environmental, Safety, and Health Division at the National Energy Technology Laboratory (NETL) for the U.S. Department of Energy. The purpose of this report is to inform the public and Department of Energy stakeholders of the environmental conditions at NETL sites in Morgantown (MGN), West Virginia, Pittsburgh (PGH), Pennsylvania, Tulsa, Oklahoma, and Fairbanks, Alaska. This report contains the most accurate information that could be collected during the period between January 1, 2002, and December 31, 2002. As stated in DOE Orders 450.1 and 231.1, the purpose of the report is to: (1) Characterize site environmental management performance. (2) Confirm compliance with environmental standards and requirements. (3) Highlight significant facility programs and efforts.

  19. The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2000

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory

    2001-11-27

    This Site Environmental Report was prepared by the Environment, Safety, and Health Division at the National Energy Technology Laboratory (NETL) for the U.S. Department of Energy. The purpose of this report is to inform the public and Department of Energy stakeholders of the environmental conditions at the NETL sites in Morgantown, West Virginia, and Pittsburgh, Pennsylvania. This report contains the most accurate information that could be collected during the period between January 1, 2000, through December 31, 2000. As stated in DOE Orders 5400.1 and 231.1, the purpose of the report is to: Characterize site environmental management performance; Confirm compliance with environmental standards and requirements and Highlight significant facility programs and efforts.

  20. A Review of Filovirus Work and Facilities at The Defence Science and Technology Laboratory Porton Down

    Directory of Open Access Journals (Sweden)

    Mark S. Lever

    2012-08-01

    Full Text Available Porton Down houses two separate sites capable of conducting high containment research on ACDP (Advisory Committee on Dangerous Pathogens Hazard Group 4 agents: the Defence Science and Technology Laboratory (Dstl and the Health Protection Agency (HPA, and filovirus research has been performed at Porton Down since the first Marburg virus disease outbreak in 1967. All work is conducted within primary containment either within cabinet lines (for in vitro work or large rigid half-suit isolators (for in vivo work. There are extensive aerobiological facilities at high containment and the use of these facilities will be reported. Research at Dstl is primarily focused on assessing and quantifying the hazard, and testing the efficacy of medical countermeasures against filoviruses. Fundamental research directed to the study and understanding of the infectious and pathogenic nature of the filoviruses, particularly in aerosols, will be reported.

  1. Integrating Safety with Science,Technology and Innovation at Los Alamos National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Rich, Bethany M [Los Alamos National Laboratory

    2012-04-02

    The mission of Los Alamos National Laboratory (LANL) is to develop and apply science, technology and engineering solutions to ensure the safety, security, and reliability of the U.S. nuclear deterrent; reduce global threats; and solve emerging national security challenges. The most important responsibility is to direct and conduct efforts to meet the mission with an emphasis on safety, security, and quality. In this article, LANL Environmental, Safety, and Health (ESH) trainers discuss how their application and use of a kinetic learning module (learn by doing) with a unique fall arrest system is helping to address one the most common industrial safety challenges: slips and falls. A unique integration of Human Performance Improvement (HPI), Behavior Based Safety (BBS) and elements of the Voluntary Protection Program (VPP) combined with an interactive simulator experience is being used to address slip and fall events at Los Alamos.

  2. Detective work at the Risley Laboratory. [Corrosion research by AEA Technology, UK

    Energy Technology Data Exchange (ETDEWEB)

    Aldridge, F.

    1989-11-01

    The Northern Research Laboratory at Risley is part of AEA Technology and until recently, the major responsibility of its Materials Science Group was to advise the nuclear power industry on corrosion and material compatibility problems. Part of the Group also provides a materials science and analysis service to the whole of the 100-acre site. The Group's work is essentially concerned with the performance of reactor or plant materials during long-term exposure to hostile chemical environments, often under static and/or dynamic loading, sometimes in an applied heat flux. The major coolants used in UK reactors vary from carbon dioxide (AGR) and high temperature pressurised water (PWR) through to high purity liquid sodium (PFR). Extensive facilities are available for investigating corrosion behaviour in all these environments, including water and sodium loops, tensile testing machines and autoclaves. (author).

  3. United States Supports Distributed Wind Technology Improvements; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Sinclair, Karin

    2015-06-15

    This presentation provides information on the activities conducted through the Competitiveness Improvement Project (CIP), initiated in 2012 by the U.S. Department of Energy (DOE) and executed through the National Renewable Energy Laboratory (NREL) to support the distributed wind industry. The CIP provides research and development funding and technical support to improve distributed wind turbine technology and increase the competitiveness of U.S. small and midsize wind turbine manufacturers. Through this project, DOE/NREL assists U.S. manufacturers to lower the levelized cost of energy of wind turbines through component improvements, manufacturing process upgrades, and turbine testing. Ultimately, this support is expected to lead to turbine certification through testing to industry-recognized wind turbine performance and safety standards.

  4. MicroArray Facility: a laboratory information management system with extended support for Nylon based technologies

    Directory of Open Access Journals (Sweden)

    Beaudoing Emmanuel

    2006-09-01

    Full Text Available Abstract Background High throughput gene expression profiling (GEP is becoming a routine technique in life science laboratories. With experimental designs that repeatedly span thousands of genes and hundreds of samples, relying on a dedicated database infrastructure is no longer an option. GEP technology is a fast moving target, with new approaches constantly broadening the field diversity. This technology heterogeneity, compounded by the informatics complexity of GEP databases, means that software developments have so far focused on mainstream techniques, leaving less typical yet established techniques such as Nylon microarrays at best partially supported. Results MAF (MicroArray Facility is the laboratory database system we have developed for managing the design, production and hybridization of spotted microarrays. Although it can support the widely used glass microarrays and oligo-chips, MAF was designed with the specific idiosyncrasies of Nylon based microarrays in mind. Notably single channel radioactive probes, microarray stripping and reuse, vector control hybridizations and spike-in controls are all natively supported by the software suite. MicroArray Facility is MIAME supportive and dynamically provides feedback on missing annotations to help users estimate effective MIAME compliance. Genomic data such as clone identifiers and gene symbols are also directly annotated by MAF software using standard public resources. The MAGE-ML data format is implemented for full data export. Journalized database operations (audit tracking, data anonymization, material traceability and user/project level confidentiality policies are also managed by MAF. Conclusion MicroArray Facility is a complete data management system for microarray producers and end-users. Particular care has been devoted to adequately model Nylon based microarrays. The MAF system, developed and implemented in both private and academic environments, has proved a robust solution for

  5. Description of the Sandia National Laboratories science, technology & engineering metrics process.

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, Gretchen B.; Watkins, Randall D.; Trucano, Timothy Guy; Burns, Alan Richard; Oelschlaeger, Peter

    2010-04-01

    There has been a concerted effort since 2007 to establish a dashboard of metrics for the Science, Technology, and Engineering (ST&E) work at Sandia National Laboratories. These metrics are to provide a self assessment mechanism for the ST&E Strategic Management Unit (SMU) to complement external expert review and advice and various internal self assessment processes. The data and analysis will help ST&E Managers plan, implement, and track strategies and work in order to support the critical success factors of nurturing core science and enabling laboratory missions. The purpose of this SAND report is to provide a guide for those who want to understand the ST&E SMU metrics process. This report provides an overview of why the ST&E SMU wants a dashboard of metrics, some background on metrics for ST&E programs from existing literature and past Sandia metrics efforts, a summary of work completed to date, specifics on the portfolio of metrics that have been chosen and the implementation process that has been followed, and plans for the coming year to improve the ST&E SMU metrics process.

  6. miRNA assays in the clinical laboratory: workflow, detection technologies and automation aspects.

    Science.gov (United States)

    Kappel, Andreas; Keller, Andreas

    2017-05-01

    microRNAs (miRNAs) are short non-coding RNA molecules that regulate gene expression in eukaryotes. Their differential abundance is indicative or even causative for a variety of pathological processes including cancer or cardiovascular disorders. Due to their important biological function, miRNAs represent a promising class of novel biomarkers that may be used to diagnose life-threatening diseases, and to monitor disease progression. Further, they may guide treatment selection or dosage of drugs. miRNAs from blood or derived fractions are particularly interesting candidates for routine laboratory applications, as they can be measured in most clinical laboratories already today. This assures a good accessibility of respective tests. Albeit their great potential, miRNA-based diagnostic tests have not made their way yet into the clinical routine, and hence no standardized workflows have been established to measure miRNAs for patients' benefit. In this review we summarize the detection technologies and workflow options that exist to measure miRNAs, and we describe the advantages and disadvantages of each of these options. Moreover, we also provide a perspective on data analysis aspects that are vital for translation of raw data into actionable diagnostic test results.

  7. Communication and computing technology in biocontainment laboratories using the NEIDL as a model.

    Science.gov (United States)

    McCall, John; Hardcastle, Kath

    2014-07-01

    The National Emerging Infectious Diseases Laboratories (NEIDL), Boston University, is a globally unique biocontainment research facility housing biosafety level 2 (BSL-2), BSL-3, and BSL-4 laboratories. Located in the BioSquare area at the University's Medical Campus, it is part of a national network of secure facilities constructed to study infectious diseases of major public health concern. The NEIDL allows for basic, translational, and clinical phases of research to be carried out in a single facility with the overall goal of accelerating understanding, treatment, and prevention of infectious diseases. The NEIDL will also act as a center of excellence providing training and education in all aspects of biocontainment research. Within every detail of NEIDL operations is a primary emphasis on safety and security. The ultramodern NEIDL has required a new approach to communications technology solutions in order to ensure safety and security and meet the needs of investigators working in this complex building. This article discusses the implementation of secure wireless networks and private cloud computing to promote operational efficiency, biosecurity, and biosafety with additional energy-saving advantages. The utilization of a dedicated data center, virtualized servers, virtualized desktop integration, multichannel secure wireless networks, and a NEIDL-dedicated Voice over Internet Protocol (VoIP) network are all discussed.

  8. [Trends of utilization of information technologies in clinical laboratory and pathology domain].

    Science.gov (United States)

    Tofukuji, Ikuo

    2007-08-01

    The life expectancy of the Japanese population is one of longest in the world. Society is aging, with fewer children, increasing the total national medical payment in Japan. This situation has forced the Government to reduce the payment and to increase the efficiency of the medical system, so information technologies are expected to contribute to these policies. Electronic patient record systems (EPR) were expected to be used widely, but only 23% of clinical training hospitals have implemented them. This is mainly due to the lack of incentives and large costs to install EPR. Standardization is a good method to reduce system construction cost and increase its quality. New global IHE activities are expected to solve these problems with methodologies of workflow analyses, standard applications, tests and demonstrations. Laboratory information systems (LIS) have a long history and tradition of standard interfaces for connecting computers with analyzers. IHE activities for LIS are providing easy and secure connections with hospital information systems (HIS). Pathology departments also have their own information systems. IHE activities for pathology were launched in 2005, and we are now developing in collaboration with the international IHE pathology working group, HL7 SIG pathology and DICOM WG-26. Pathologists and technical experts in Japanese laboratories are encouraged to join IHE activities to ensure good results.

  9. Dental Emergencies

    OpenAIRE

    Domb, Ivor

    1982-01-01

    Emergency dental problems can result from trauma, dental pathology, or from dental treatment itself. While the physician can treat many instances of dental trauma, the patient should see a dentist as soon as possible so that teeth can be saved. Emergency treatment of dental pathology usually involves relief of pain and/or swelling. Bleeding is the most frequent post-treatment emergency. The physician should be able to make the patient comfortable until definitive dental treatment can be avail...

  10. Biocompatibility of dental alloys

    Energy Technology Data Exchange (ETDEWEB)

    Braemer, W. [Heraeus Kulzer GmbH and Co. KG, Hanau (Germany)

    2001-10-01

    Modern dental alloys have been used for 50 years to produce prosthetic dental restorations. Generally, the crowns and frames of a prosthesis are prepared in dental alloys, and then veneered by feldspar ceramics or composites. In use, the alloys are exposed to the corrosive influence of saliva and bacteria. Metallic dental materials can be classified as precious and non-precious alloys. Precious alloys consist of gold, platinum, and small amounts of non-precious components such as copper, tin, or zinc. The non-precious alloys are based on either nickel or cobalt, alloyed with chrome, molybdenum, manganese, etc. Titanium is used as Grade 2 quality for dental purposes. As well as the dental casting alloys, high purity electroplated gold (99.8 wt.-%) is used in dental technology. This review discusses the corrosion behavior of metallic dental materials with saliva in ''in vitro'' tests and the influence of alloy components on bacteria (Lactobacillus casei and Streptococcus mutans). The test results show that alloys with high gold content, cobalt-based alloys, titanium, and electroplated gold are suitable for use as dental materials. (orig.)

  11. Dental Procedures.

    Science.gov (United States)

    Ramponi, Denise R

    2016-01-01

    Dental problems are a common complaint in emergency departments in the United States. There are a wide variety of dental issues addressed in emergency department visits such as dental caries, loose teeth, dental trauma, gingival infections, and dry socket syndrome. Review of the most common dental blocks and dental procedures will allow the practitioner the opportunity to make the patient more comfortable and reduce the amount of analgesia the patient will need upon discharge. Familiarity with the dental equipment, tooth, and mouth anatomy will help prepare the practitioner for to perform these dental procedures.

  12. NASA's Corrosion Technology Laboratory at the Kennedy Space Center: Anticipating, Managing, and Preventing Corrosion

    Science.gov (United States)

    Calle, Luz Marina

    2015-01-01

    The marine environment at NASAs Kennedy Space Center (KSC) has been documented by ASM International (formerly American Society for Metals) as the most corrosive in North America. With the introduction of the Space Shuttle in 1981, the already highly corrosive conditions at the launch pads were rendered even more severe by the highly corrosive hydrochloric acid (HCl) generated by the solid rocket boosters (SRBs). Numerous failures at the launch pads are caused by corrosion. The structural integrity of ground infrastructure and flight hardware is critical to the success, safety, cost, and sustainability of space missions. NASA has over fifty years of experience dealing with unexpected failures caused by corrosion and has developed expertise in corrosion control in the launch and other environments. The Corrosion Technology Laboratory at KSC evolved, from what started as an atmospheric exposure test site near NASAs launch pads, into a capability that provides technical innovations and engineering services in all areas of corrosion for NASA, external partners, and customers.This paper provides a chronological overview of NASAs role in anticipating, managing, and preventing corrosion in highly corrosive environments. One important challenge in managing and preventing corrosion involves the detrimental impact on humans and the environment of what have been very effective corrosion control strategies. This challenge has motivated the development of new corrosion control technologies that are more effective and environmentally friendly. Strategies for improved corrosion protection and durability can have a huge impact on the economic sustainability of human spaceflight operations.

  13. Evaluation of tooth preparations for Class II cavities using magnification loupes among dental interns and final year BDS students in preclinical laboratory

    Directory of Open Access Journals (Sweden)

    Khyati Narula

    2015-01-01

    Conclusions: Magnifying loupes help the dental students to have better vision, thus improved dexterity with hands while preparing the tooth for restoration. However, dental students have to get adapted to the loupes for the ease of using loupes. Using loupes frequently may help them to get adapted to the loupes.

  14. Management of stress and stress-related diseases: Emerging computer-based technologies and the rationale for clinical laboratory assessment

    OpenAIRE

    Ezekiel Uba Nwose; Ross Stuart Richards

    2009-01-01

    Background : Over the years, the issue of stress management in mental health has been discussed without reference to the clinical laboratory perspectives. Translational research and the vast array of emerging diagnostic technologies in alternative medical practice are now bridging the gap. While it would be scientific arrogance for the clinical practitioner and scientist to ignore the trend, the new technologies seeking clinical acceptability necessarily require expatiation of the scientific ...

  15. Short-Term and Long-Term Technology Needs/Matching Status at Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    S. L. Claggett

    1999-12-01

    This report identifies potential technology deployment opportunities for the Environmental Management (EM) programs at the Idaho National Engineering and Environmental Laboratory (INEEL). The focus is on identifying candidates for Accelerated Site Technology Deployment (ASTD) proposals within the Environmental Restoration and Waste Management areas. The 86 technology needs on the Site Technology Coordination Group list were verified in the field. Six additional needs were found, and one listed need was no longer required. Potential technology matches were identified and then investigated for applicability, maturity, cost, and performance. Where promising, information on the technologies was provided to INEEL managers for evaluation. Eleven potential ASTD projected were identified, seven for near-term application and four for application within the next five years.

  16. Overview of the Defense Programs Research and Technology Development Program for fiscal year 1993. Appendix II research laboratories and facilities

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-30

    This document contains summaries of the research facilities that support the Defense Programs Research and Technology Development Program for FY 1993. The nine program elements are aggregated into three program clusters as follows: (1) Advanced materials sciences and technologies; chemistry and materials, explosives, special nuclear materials (SNM), and tritium. (2) Design sciences and advanced computation; physics, conceptual design and assessment, and computation and modeling. (3) Advanced manufacturing technologies and capabilities; system engineering science and technology, and electronics, photonics, sensors, and mechanical components. Section I gives a brief summary of 23 major defense program (DP) research and technology facilities and shows how these major facilities are organized by program elements. Section II gives a more detailed breakdown of the over 200 research and technology facilities being used at the Laboratories to support the Defense Programs mission.

  17. Best available technology for the Los Alamos National Laboratory Radioactive Liquid Waste Treatment Facility

    Energy Technology Data Exchange (ETDEWEB)

    Midkiff, W.S.; Romero, R.L.; Suazo, I.L.; Garcia, R.; Parsons, R.M.

    1993-10-15

    The existing Los Alamos National Laboratory TA-50 liquid radioactive waste treatment plant RLWP has been in service for over thirty years, during this period many technical, regulatory, and processing changes have occurred. The existing facility can no longer comply with the demands and requirements for continued operation, and would not be able to comply with anticipated stringent future contaminant discharge limitations. Either a major upgrading or replacement of the existing facility is required. In order to assess the most appropriate means of providing an adequate facility to comply with predicted requirements for Ta-50, this Best Available Technology (BAT) Study was conducted to compare feasible technical and economic alternatives in order to define the most favorable technology configuration. This report consists of eleven sections. Section 1 provides a general introduction and background of the TA-50 operations and the basis for this study. Section 2 provides a technical discussion of the unit processes at TA-50 and several other comparable operations at other DOE sites. Section 3 addresses the evaluation and selection of appropriate treatment processes. Section 4 provides an analysis of environmental issues and concerns. Section 5 presents the rationale for the selection of preferred process configurations. Section 6 is the evaluation of operational issues. Section 7 addresses energy and resource use topics. Section 8 provides an economic analysis, and Section 9 summarizes the evaluation and the identification of the BAT. These sections are augmented by appendices. The report identifies the construction of a new radioactive liquid waste treatment facility as the BAT. Based on the information analyzed for this study, this option appears to provide the best combination of environmental compliance, operability, and economic value.

  18. Technology Development for Large Radio Arrays at the Jet Propulsion Laboratory

    Science.gov (United States)

    Jones, Dayton L.; Preston, R.; Navarro, R.; Wagstaff, K.; Mattmann, C.; D'Addario, L.; Thompson, D.; Majid, W.; Lazio, J.

    2011-05-01

    Future radio arrays are likely to include far more antennas than current arrays, ultimately culminating in the Square Kilometre Array. During the past 1.5 years JPL personnel have been working on technologies to address the challenges of such large arrays, including lower power digital signal processing, real-time data adaptive algorithms, and large-scale data archiving and mining. Power consumption by digital electronics may be a dominant component of the operating costs of large arrays. The choice of architecture for cross-correlation of thousands of antennas can have an orders-of-magnitude impact on power consumption. A power efficient architecture for a very-large-N array has been found. A second area of development at JPL is adaptive algorithms to perform real-time processing of data in high volume data flows, when storage of raw data for later processing is not an option. Algorithms to enable real-time detection of fast radio transients are being tested on the VLBA, and will be deployed as part of the CRAFT collaboration on ASKAP and potentially at other observatories. Finally, large radio arrays will produce extremely large data archives. We are working on applying a scalable framework for managing and mining large data archives to radio array needs. This framework is JPL's open source Process Control System, initially built for archiving data from NASA Earth Science missions and now used in a number of applications outside of astronomy. This work has been carried out at the Jet Propulsion Laboratory, California Institute of Technology, under contract with the National Aeronautics and Space Administration.

  19. Management of stress and stress-related diseases: Emerging computer-based technologies and the rationale for clinical laboratory assessment

    Directory of Open Access Journals (Sweden)

    Ezekiel Uba Nwose

    2009-01-01

    Full Text Available Background : Over the years, the issue of stress management in mental health has been discussed without reference to the clinical laboratory perspectives. Translational research and the vast array of emerging diagnostic technologies in alternative medical practice are now bridging the gap. While it would be scientific arrogance for the clinical practitioner and scientist to ignore the trend, the new technologies seeking clinical acceptability necessarily require expatiation of the scientific aspects of their products. Aims : This commentary builds on a comparative critical review to further our hypothesis that oxidative stress is the biochemical basis of the emerging computer-based diagnostic technologies. Materials & Method : The available information on Computer Meridian Diagnostics, Neuropattern and Virtual Scanning technologies were critically reviewed. The differences and similarities were articulated. Results : The technologies seem different, but have similarities that have not been articulated before. The seemingly different theories are traceable to Russian scientists and are based upon stress-induced adrenal secretions and the associated effect on glucose metabolism. The therapeutic effects of antioxidant nutrition, exercise or relaxation that are inherent in the technologies are highlighted. Conclusion : This commentary furthers explanation of the alterations in antioxidant activities as a result of biofeedback, oxidative stress and/or physiological effects as the biochemical basis of the technologies. The place for antioxidant indices and whole blood viscosity are also highlighted. This provides a rationale for the evaluation of available clinical diagnostic tests both to validate the technologies and as clinical laboratory correlates in stress management.

  20. Dental Chairside Technique. Student's Manual.

    Science.gov (United States)

    Apfel, Maura; Weaver, Trudy Karlene

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: local anesthesia; dental office emergencies; oral hygiene;…

  1. Establishment of an Environmental Control Technology Laboratory with a Circulating Fluidized-Bed Combustion System

    Energy Technology Data Exchange (ETDEWEB)

    Wei-Ping Pan; Zhongxian Cheng; Yan Cao; John Smith

    2006-09-30

    This report is to present the progress made on the project entitled ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the period July 1, 2006 through September 30, 2006. The following activities have been completed: the steel floor grating around the riser in all levels and the three-phase power supply for CFBC System was installed. Erection of downcomers, loop seals, ash bunker, thermal expansion joints, fuel and bed material bunkers with load cells, rotary air-lock valves and fuel flow monitors is underway. Pilot-scale slipstream tests conducted with bromine compound addition were performed for two typical types of coal. The purposes of the tests were to study the effect of bromine addition on mercury oxidization. From the test results, it was observed that there was a strong oxidization effect for Powder River Basin (PRB) coal. The proposed work for next quarter and project schedule are also described.

  2. Dental Assisting Course. Bilingual Vocational Instructional Materials.

    Science.gov (United States)

    Lopez-Cox, Guadalupe

    This course in dental assisting, one of a series of bilingual English-Spanish vocational education courses, is designed to prepare the student to assist the dentist at the chairside in the dental operatory, to perform reception and clerical functions, and to carry out selected dental laboratory work. The course covers an introduction to the…

  3. Research Group Introduction : Welfare System Laboratory, Dept.of Electrical, Electronics and Computer Engineering, Chiba Institute of Technology

    Science.gov (United States)

    関, 弘和

    Welfare system laboratory in Chiba Institute of Technology consists of twenty students. The research subjects include the driving control system of electric powered wheelchairs, myoelectric hand control based on EMG signal analysis and non-daily behavior detection monitoring system for elderly people.

  4. Validating the Technology Acceptance Model in the Context of the Laboratory Information System-Electronic Health Record Interface System

    Science.gov (United States)

    Aquino, Cesar A.

    2014-01-01

    This study represents a research validating the efficacy of Davis' Technology Acceptance Model (TAM) by pairing it with the Organizational Change Readiness Theory (OCRT) to develop another extension to the TAM, using the medical Laboratory Information Systems (LIS)--Electronic Health Records (EHR) interface as the medium. The TAM posits that it is…

  5. Automatic Vacuum Flushing Technology for Combined Sewer Solids: Laboratory Testing and Proposed Improvements (WERF Report INFR7SG09)

    Science.gov (United States)

    This research study included an extensive literature review on existing sewer sediment flushing technologies. An innovative vacuum flush system previously developed by the U.S. EPA was tested under laboratory conditions. The tests revealed a strong correlation between the strengt...

  6. Setting up a Low-Cost Lab Management System for a Multi-Purpose Computing Laboratory Using Virtualisation Technology

    Science.gov (United States)

    Mok, Heng Ngee; Lee, Yeow Leong; Tan, Wee Kiat

    2012-01-01

    This paper describes how a generic computer laboratory equipped with 52 workstations is set up for teaching IT-related courses and other general purpose usage. The authors have successfully constructed a lab management system based on decentralised, client-side software virtualisation technology using Linux and free software tools from VMware that…

  7. A Guide for Planning Facilities for Occupational Preparation Programs in Laboratory Animal Science Technology. Interim Report. Research 27.

    Science.gov (United States)

    Colling, Walter E.; Farnsworth, Wilbur M.

    The major purpose of this guide is to elicit the necessary information for the writing of educational specifications for facilities to house career programs in laboratory animal science technology. The guide is also designed to: (1) assist planners in formation of creative solutions to the housing of desired educational programs, (2) prevent…

  8. Validating the Technology Acceptance Model in the Context of the Laboratory Information System-Electronic Health Record Interface System

    Science.gov (United States)

    Aquino, Cesar A.

    2014-01-01

    This study represents a research validating the efficacy of Davis' Technology Acceptance Model (TAM) by pairing it with the Organizational Change Readiness Theory (OCRT) to develop another extension to the TAM, using the medical Laboratory Information Systems (LIS)--Electronic Health Records (EHR) interface as the medium. The TAM posits that it is…

  9. Laboratory {open_quotes}proof of principle{close_quotes} investigation for the acoustically enhanced remediation technology

    Energy Technology Data Exchange (ETDEWEB)

    Iovenitti, J.L.; Spencer, J.W. Jr.; Hill, D.G. [Weiss Associates, Emergyville, CA (United States)] [and others

    1995-10-01

    Weiss Associates is conducting a three phase program investigating the systematics of using acoustic excitation fields (AEFs) to enhance the in-situ remediation of contaminated soil and ground water under both saturated and unsaturated conditions: Phase I - Laboratory Scale Parametric Investigation; Phase II - Technology Scaling Study; and Phase III - Large Scale Field Tests. Phase I, the subject of this paper, consisted primarily of a laboratory proof of principle investigation. The field deployment and engineering viability of acoustically enhanced remediation (AER) technology was also examined. Phase II is a technology scaling study addressing the scale up between laboratory size samples on the order of inches, and the data required for field scale testing, on the order of hundreds of feet. Phase III will consist of field scale testing at an non-industrialized, non-contaminated site and at a contaminated site to validate the technology. Summarized herein are the results of the Phase I {open_quotes}proof-of-principle{close_quotes} investigation, and recommendations for Phase H. A general overview of AER technology along with the plan for the Phase I investigation was presented.

  10. A closer look at diagnosis in clinical dental practice: part 5. Emerging technologies for caries detection and diagnosis.

    Science.gov (United States)

    Pretty, Iain A; Maupomé, Gerardo

    2004-09-01

    Parts 5 and 6 of this series examine innovations in diagnostic and management procedures and assess their potential to become everyday tools of the dental clinician. This paper examines some of the diagnostic tools supporting a philosophical shift in mainstream dental practice from concern with extensively decayed teeth to a focus on detecting incipient demineralized tissues. With the latter approach, the incipient carious process can be reversed by promoting enamel remineralization and thus eliminating the need for restorative intervention. Numerous methods and devices have been developed to detect, diagnose and monitor such lesions, and several have been produced in versions that may appeal to dental practitioners. This paper considers 3 of these methods and devices: the DIAGNODent laser device, quantitative light-induced fluorescence and the Digital Imaging Fiber-Optic Transillumination device. Each technique is illustrated, the research on its effectiveness is assessed to determine usefulness to the practitioner, and the comparative advantages of the 3 adjunct tools are discussed.

  11. Latex Allergy in Dental Care

    Directory of Open Access Journals (Sweden)

    Dermata A.

    2014-07-01

    Full Text Available Natural rubber latex is found in numerous medical and dental products. Adverse latex reactions in dental patients and practitioners have significantly increased since the introduction of universal precautions for infection control. These reactions range from contact dermatitis to potentially life-threatening hypersensitivity. Patients with a history of spina bifida, urogenital anomalies, multiple surgical procedures, allergic reactions or atopy, health care personnel and latex production workers are at increased risk of latex allergy. Diagnosis is based on a combination of clinical history and laboratory tests. Identification of latex sources and the avoidance of latex exposure are critical for protecting both dental patients and dental personnel.

  12. Health Occupations Education Program Development Guide No. 5: Dental Assisting.

    Science.gov (United States)

    New York State Education Dept., Albany. Div. of Occupational Education Instruction.

    The bulletin, which is part of the New York State "Health Occupations Education Program Development Guide Series," focuses on the dental assisting program. The curriculum is designed to provide training for dental assistants in their assistant role at chairside, in the dental operatory and laboratory, and in the dental office and reception area. A…

  13. Establishment of an Environmental Control Technology Laboratory with a Circulating Fluidized-Bed Combustion System

    Energy Technology Data Exchange (ETDEWEB)

    Wei-Ping Pan; Yan Cao; John Smith

    2007-03-31

    This report is to present the progress made on the project entitled ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the period January 1, 2007 through March 31, 2007. The effort in this quarter has concentrated on installing the CFBC Facility and for conducting cold fluidization operations tests in the CFBC facility. The assembly of the ash recirculation pipe duct from the cyclones back to the bed area of the combustor, including the upper and lower loop seals was completed. The electric bed pre-heater was installed to heat the fluidizing air as it enters the wind box. The induced draft fan along with its machine base and power supply was received and installed. The flue gas duct from secondary cyclone outlet to induced draft fan inlet was received and installed, as well as the induced fan flue gas discharge duct. Pressure testing from the forced draft fan to the outlet of the induced fan was completed. In related research a pilot-scale halogen addition test was conducted in the empty slipstream reactor (without (Selective Catalytic Reduction) SCR catalyst loading) and the SCR slipstream reactor with two commercial SCR catalysts. The greatest benefits of conducting slipstream tests can be flexible control and isolation of specific factors. This facility is currently used in full-scale utility and will be combined into 0.6MW CFBC in the future. This work attempts to first investigate performance of the SCR catalyst in the flue gas atmosphere when burning Powder River Basin (PRB), including the impact of PRB coal flue gas composition on the reduction of nitrogen oxides (NOx) and the oxidation of elemental mercury (Hg(0)) under SCR conditions. Secondly, the impacts of hydrogen halogens (Hydrogen fluoride (HF), Hydrogen chloride (HCl), Hydrogen Bromide (HBr) and Hydrogen Iodine (HI)) on Hg(0) oxidation and their mechanisms can be explored.

  14. Introducing sequential managed aquifer recharge technology (SMART) - From laboratory to full-scale application.

    Science.gov (United States)

    Regnery, Julia; Wing, Alexandre D; Kautz, Jessica; Drewes, Jörg E

    2016-07-01

    Previous lab-scale studies demonstrated that stimulating the indigenous soil microbial community of groundwater recharge systems by manipulating the availability of biodegradable organic carbon (BDOC) and establishing sequential redox conditions in the subsurface resulted in enhanced removal of compounds with redox-dependent removal behavior such as trace organic chemicals. The aim of this study is to advance this concept from laboratory to full-scale application by introducing sequential managed aquifer recharge technology (SMART). To validate the concept of SMART, a full-scale managed aquifer recharge (MAR) facility in Colorado was studied for three years that featured the proposed sequential configuration: A short riverbank filtration passage followed by subsequent re-aeration and artificial recharge and recovery. Our findings demonstrate that sequential subsurface treatment zones characterized by carbon-rich (>3 mg/L BDOC) to carbon-depleted (≤1 mg/L BDOC) and predominant oxic redox conditions can be established at full-scale MAR facilities adopting the SMART concept. The sequential configuration resulted in substantially improved trace organic chemical removal (i.e. higher biodegradation rate coefficients) for moderately biodegradable compounds compared to conventional MAR systems with extended travel times in an anoxic aquifer. Furthermore, sorption batch experiments with clay materials dispersed in the subsurface implied that sorptive processes might also play a role in the attenuation and retardation of chlorinated flame retardants during MAR. Hence, understanding key factors controlling trace organic chemical removal performance during SMART allows for systems to be engineered for optimal efficiency, resulting in improved removal of constituents at shorter subsurface travel times and a potentially reduced physical footprint of MAR installations.

  15. Laboratory and Field Evaluation of In-Place Asphalt Recycling Technologies for Small Airfield Repair

    Science.gov (United States)

    2013-06-01

    Recommendation of materials, equipment and process for in-place asphalt recycling Part I Laboratory Evaluation RAP Material Characterization • Binder...laboratory testing based upon their chemical properties and costs. Reclaimed asphalt pavement ( RAP ) material was obtained from both test sites for...Part I of this study was to conduct laboratory testing to:  characterize the reclaimed asphalt pavement ( RAP ) from the test sites,  evaluate how

  16. Using Technology to Enhance Student Learning in the Laboratory through Collaborative Grouping

    Science.gov (United States)

    Cox, Anne J.; Junkin, William F.

    1998-11-01

    We have developed a strategy to improve student learning in the laboratory by pairing groups for brief discussions during the class. Specifically, we ask students questions via networked computers to probe their current understanding of material. The students' answers then serve as guides for the pairing of laboratory groups for further discussion. Focused student discussions lead to an increase in student learning, critical thinking and communication in the laboratory. We will briefly explain and demonstrate this strategy. We will also present preliminary results indicating that students show improved conceptual understanding when they are engaged in a laboratory exercise employing this pedagogical strategy.

  17. About Dental Amalgam Fillings

    Science.gov (United States)

    ... and Medical Procedures Dental Devices Dental Amalgam About Dental Amalgam Fillings Share Tweet Linkedin Pin it More ... should I have my fillings removed? What is dental amalgam? Dental amalgam is a dental filling material ...

  18. Dental Implant Surgery

    Science.gov (United States)

    ... here to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, surgery, ... here to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, surgery, ...

  19. Dental Sealants

    Science.gov (United States)

    ... Dates Electronic Submission of Applications Grants 101 (How to Write a Grant) Questions and Answers Grant Writing Tips ... offers strategies for providing oral care. NIDCR > Data & Statistics > Find Data by Topic > Dental Sealants Dental Sealants ...

  20. Dental Assistants

    Science.gov (United States)

    ... Z INDEX | OOH SITE MAP | EN ESPAÑOL Healthcare > Dental Assistants PRINTER-FRIENDLY EN ESPAÑOL Summary What They ... of workers and occupations. What They Do -> What Dental Assistants Do About this section Assistants prepare and ...

  1. Dental sealants

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000779.htm Dental sealants To use the sharing features on this ... case a sealant needs to be replaced. How Dental Sealants are Applied Your dentist applies sealants on ...

  2. Dental cavities

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/001055.htm Dental cavities To use the sharing features on this page, please enable JavaScript. Dental cavities are holes (or structural damage) in the ...

  3. A prototype catalogue: DOE National Laboratory technologies for infrastructure modernization. Letter report made publicly available December 1992

    Energy Technology Data Exchange (ETDEWEB)

    Currie, J.W.; Wilfert, G.L.; March, F.

    1990-01-01

    The purpose of this report is to provide the Office of Technology Assessment (OTA) with information about selected technologies under development in the Department of Energy (DOE) through its National Laboratory System and its Program Office operations. The technologies selected are those that have the potential to improve the performance of the nation`s public works infrastructure. The product is a relational database that we refer to as a ``prototype catalogue of technologies.`` The catalogue contains over 100 entries of DOE-supported technologies having potential application to infrastructure-related problems. The work involved conceptualizing an approach, developing a framework for organizing technology information, and collecting samples of readily available data to be put into a prototype catalogue. In developing the catalogue, our objectives were to demonstrate the concept and provide readily available information to OTA. As such, the catalogue represents a preliminary product. The existing database is not exhaustive and likely represents only a fraction of relevant technologies developed by DOE. In addition, the taxonomy we used to classify technologies is based on the judgment of project staff and has received minimal review by individuals who have been involved in the development and testing of the technologies. Finally, end users will likely identify framework changes and additions that will strengthen the catalogue approach. The framework for the catalogue includes four components: a description of the technology, along with potential uses and other pertinent information; identification of the source of the descriptive information; identification of a person or group knowledgeable about the technology; and a classification of the described technology in terms of its type, application, life-cycle use, function, and readiness.

  4. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II (this volume) describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Specific INEL problem areas/contaminants are identified along with technology solutions, the status of the technologies, precise science and technology needs, and implementation requirements. Volume III provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are referenced by a TEDS codenumber in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II.

  5. DENTAL MATERIALS.

    Science.gov (United States)

    The study deals with the determination of characteristic physical and mechanical properties of restorative dental materials, and effect of...manipulative variables on these properties. From the study an entirely new dental gold inlay casting technic was developed, based on the principle of...controlled water added hygroscopic technic. The method has had successful dental applications and is a recognized method of dental inlay casting procedure

  6. An Investigative Laboratory Course in Human Physiology Using Computer Technology and Collaborative Writing

    Science.gov (United States)

    FitzPatrick, Kathleen A.

    2004-01-01

    Active investigative student-directed experiences in laboratory science are being encouraged by national science organizations. A growing body of evidence from classroom assessment supports their effectiveness. This study describes four years of implementation and assessment of an investigative laboratory course in human physiology for 65…

  7. An Evaluation of Student Performance on Traditional vs. Synopsis Laboratory Reports in Industrial Technology

    Science.gov (United States)

    Hoffa, David; Freeman, Steven

    2008-01-01

    Prior research demonstrated that writing synopsis laboratory reports (succinct syntheses of the experiment, lecture, and readings) instead of traditional laboratory reports, did not influence student learning as measured by comprehensive exam scores. This study extended this research by investigating the impact of these lab report formats on…

  8. The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2001

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory

    2002-10-01

    No significant environmental problems were identified at the National Energy Technology Laboratory (NETL) sites in Morgantown (MGN), Pittsburgh (PGH), Tulsa (NPTO) and Fairbanks (AEO) during 2001. No radionuclides were released from the sites during 2001. The sites maintain two major environmental programs: waste management, and environmental media and release management. These two programs encompass waste handling, storage, and disposal, waste minimization and pollution prevention, air quality emissions, surface-water discharges, groundwater impacts, industrial wastewater discharges, and spill control procedures. The Morgantown and Pittsburgh sites currently maintain complete monitoring programs for groundwater, stormwater discharge, laboratory wastewater discharge, and meteorological data. In addition, an annual air emissions inventory is prepared. A comprehensive Directives Program aimed at managing environmental, safety, health requirements, and risks was initiated in 1997, continued through subsequent years, and will be completed in 2003. The primary objective of the program is to identify and implement standards that will protect the health and safety of workers, public, and the environment. This program started with a careful and thorough analysis of risks confronting workers and the communities surrounding NETL sites. Following this analysis, requirements and best management practices were evaluated to determine how requirements could best be used to advance the mission of NETL. Teams of subject-matter experts analyzed the work assigned to determine potential hazards and identify ways to remove or control those hazards. In 2001, NETL developed or revised a series of directives in two major areas: safety analysis and review (SAR) processes, and integrated safety management (ISM) directives. SAR directives were issued for research and development (R&D) operations, support operations, and facilities. ISM directives were released on management processes, such

  9. An evaluation of alternative reactor vessel cutting technologies for the experimental boiling water reactor at Argonne National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Boing, L.E.; Henley, D.R. (Argonne National Lab., IL (USA)); Manion, W.J.; Gordon, J.W. (Nuclear Energy Services, Inc., Danbury, CT (USA))

    1989-12-01

    Metal cutting techniques that can be used to segment the reactor pressure vessel of the Experimental Boiling Water Reactor (EBWR) at Argonne National Laboratory (ANL) have been evaluated by Nuclear Energy Services. Twelve cutting technologies are described in terms of their ability to perform the required task, their performance characteristics, environmental and radiological impacts, and cost and schedule considerations. Specific recommendations regarding which technology should ultimately be used by ANL are included. The selection of a cutting method was the responsibility of the decommissioning staff at ANL, who included a relative weighting of the parameters described in this document in their evaluation process. 73 refs., 26 figs., 69 tabs.

  10. Neurogaming Technology Meets Neuroscience Education: A Cost-Effective, Scalable, and Highly Portable Undergraduate Teaching Laboratory for Neuroscience.

    Science.gov (United States)

    de Wit, Bianca; Badcock, Nicholas A; Grootswagers, Tijl; Hardwick, Katherine; Teichmann, Lina; Wehrman, Jordan; Williams, Mark; Kaplan, David Michael

    2017-01-01

    Active research-driven approaches that successfully incorporate new technology are known to catalyze student learning. Yet achieving these objectives in neuroscience education is especially challenging due to the prohibitive costs and technical demands of research-grade equipment. Here we describe a method that circumvents these factors by leveraging consumer EEG-based neurogaming technology to create an affordable, scalable, and highly portable teaching laboratory for undergraduate courses in neuroscience. This laboratory is designed to give students hands-on research experience, consolidate their understanding of key neuroscience concepts, and provide a unique real-time window into the working brain. Survey results demonstrate that students found the lab sessions engaging. Students also reported the labs enhanced their knowledge about EEG, their course material, and neuroscience research in general.

  11. Dental amalgam - the effect of the technology of alloy powder preparation on the corrosion behaviour and the release of mercury

    Energy Technology Data Exchange (ETDEWEB)

    Joska, L.; Bystriansky, J.; Novak, P. [Institute of Chemical Technology, Prague, Institute of Metals and Corrosion Engineering, Technicka 5, 166 28 Prague 6 (Czech Republic)

    2003-03-01

    Dental amalgams are based on a broad spectrum of materials differing in their chemical composition, metallurgical treatment, and in the way the initial alloys powders are prepared. In addition to their chemical composition, amalgams based on various powders differ in both their microstructure and the amount of mercury needed for preparation. All these facts may affect electrochemical processes occurring during their interaction with oral fluids, and also mercury release. While verifying the effect of the technology used for the preparation of the high-copper ternary alloy powder on the properties of resulting amalgams, this study aimed at the mechanism of their interaction with a model saliva solution as well as mercury release was included. Measurements were done in a model saliva solution using standard electrochemical methods and exposition measurements. The interaction of individual types of amalgams with artificial saliva did not reveal any significant differences. The free corrosion potential of all these amalgams in an aerated solution settled in the range of values in which tin oxidation, resulting in a layer of insoluble corrosion products, turned out to be the dominant anodic process. The rate of mercury release was the lowest for amalgams based on a gas-atomized alloy. The highest rate of mercury release, and also its dependence on time, was exhibited by lathe-cut powder based amalgam. In addition to different volume fraction of the Ag-Hg phase and the level of its tin alloying, this different behaviour may be explained by differences in the rate at which a layer of tin corrosion products acting as a barrier to mercury release is formed. (Abstract Copyright [2003], Wiley Periodicals, Inc.) [German] Dentalamalgame basieren auf einem breitem Spektrum von Werkstoffen, die sich in ihrer chemischen Zusammensetzung, der metallurgischen Behandlung und der Art, wie die Ausgangslegierungspulver hergestellt werden, unterscheiden. Zusaetzlich zu ihrer chemischen

  12. Idaho National Laboratory Technology to Market (T2M) Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Christopher Todd [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bush, Jason William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gentle, Jake Paul [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hill, Porter Jack [Idaho National Lab. (INL), Idaho Falls, ID (United States); Myers, Kurt Steven [Idaho National Lab. (INL), Idaho Falls, ID (United States); Williams, Christopher Luke [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-01-01

    The objective of this project is to establish a tiered Technology to Market (T2M) curriculum for basic researchers to project leads to measure the effect of technology transfer skills on project success and impact. The plan will train five researchers in basic technology transfer principles where success will be measured by assessing improvements in T2M skills and knowledge after the training is complete, likely using before and after surveys.

  13. Application of ATM technology to the Systems Management Department Computer Laboratory Network

    OpenAIRE

    Williams, Robert

    1996-01-01

    Approved for public release; distribution is unlimited. Since the appearance of Local Area Networks (LANs), their use and bandwidth consumption have increased considerably. Users are now seeking new technologies to satisfy their bandwidth demand. Many consider ATM as the solution to their needs. Though ATM is fairly new networking technology, it has made several strides, and is now considered a viable technology that is applicable LAN environment. However, migrating from today's shared-med...

  14. Laboratory study on the cooling effect of flash water evaporative cooling technology for ventilation and air-conditioning of buildings

    DEFF Research Database (Denmark)

    Fang, Lei; Yuan, Shu; Yang, Jianrong

    2016-01-01

    This paper presents a simple cooling technology using flash water evaporation. The technology combines a water atomizer with a plate heat exchanger used for heat recovery of a ventilation system. It is mainly used to cool the ventilation airflow from outdoors and is particularly suitable to be used...... in warm/hot and dry environment where dehumidification of outdoor air is not needed. A laboratory experiment was designed and conducted to evaluate the cooling effectiveness of this technology. The experiment was conducted in a twin-climate chamber. One chamber simulated warm/hot and dry outdoor...... environments and the other simulated an air-conditioned indoor environment. The flash water evaporation cooling device was installed in the chamber that simulated indoor environment. The air from the chamber simulating outdoor environment was introduced into the cooling device and cooled by the flash water...

  15. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Volume III (this volume) provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are reference by a TEDS code number in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II. Data sheets are arranged alphanumerically by the TEDS code number in the upper right corner of each sheet.

  16. Los Alamos National Laboratory Tritium Technology Deployments Large Scale Demonstration and Deployment Project

    Energy Technology Data Exchange (ETDEWEB)

    McFee, J.; Blauvelt, D.; Stallings, E.; Willms, S.

    2002-02-26

    This paper describes the organization, planning and initial implementation of a DOE OST program to deploy proven, cost effective technologies into D&D programs throughout the complex. The primary intent is to accelerate closure of the projects thereby saving considerable funds and at the same time being protective of worker health and the environment. Most of the technologies in the ''toolkit'' for this program have been demonstrated at a DOE site as part of a Large Scale Demonstration and Deployment Project (LSDDP). The Mound Tritium D&D LSDDP served as the base program for the technologies being deployed in this project but other LSDDP demonstrated technologies or ready-for-use commercial technologies will also be considered. The project team will evaluate needs provided by site D&D project managers, match technologies against those needs and rank deployments using a criteria listing. After selecting deployments the project will purchase the equipment and provide a deployment engineer to facilitate the technology implementation. Other cost associated with the use of the technology will be borne by the site including operating staff, safety and health reviews etc. A cost and performance report will be prepared following the deployment to document the results.

  17. Advancing adaptive optics technology: Laboratory turbulence simulation and optimization of laser guide stars

    Science.gov (United States)

    Rampy, Rachel A.

    Since Galileo's first telescope some 400 years ago, astronomers have been building ever-larger instruments. Yet only within the last two decades has it become possible to realize the potential angular resolutions of large ground-based telescopes, by using adaptive optics (AO) technology to counter the blurring effects of Earth's atmosphere. And only within the past decade have the development of laser guide stars (LGS) extended AO capabilities to observe science targets nearly anywhere in the sky. Improving turbulence simulation strategies and LGS are the two main topics of my research. In the first part of this thesis, I report on the development of a technique for manufacturing phase plates for simulating atmospheric turbulence in the laboratory. The process involves strategic application of clear acrylic paint onto a transparent substrate. Results of interferometric characterization of the plates are described and compared to Kolmogorov statistics. The range of r0 (Fried's parameter) achieved thus far is 0.2--1.2 mm at 650 nm measurement wavelength, with a Kolmogorov power law. These plates proved valuable at the Laboratory for Adaptive Optics at University of California, Santa Cruz, where they have been used in the Multi-Conjugate Adaptive Optics testbed, during integration and testing of the Gemini Planet Imager, and as part of the calibration system of the on-sky AO testbed named ViLLaGEs (Visible Light Laser Guidestar Experiments). I present a comparison of measurements taken by ViLLaGEs of the power spectrum of a plate and the real sky turbulence. The plate is demonstrated to follow Kolmogorov theory well, while the sky power spectrum does so in a third of the data. This method of fabricating phase plates has been established as an effective and low-cost means of creating simulated turbulence. Due to the demand for such devices, they are now being distributed to other members of the AO community. The second topic of this thesis pertains to understanding and

  18. RadBall{sup TM} Technology Testing in the Savannah River Site's Health Physics Instrument Calibration Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Farfan, Eduardo B; Foley, Trevor Q; Jannik, G Timothy; Harpring, Larry J; Gordon, John R; Blessing, Ronald; Coleman, J Rusty; Holmes, Christopher J; Oldham, Mark; Adamovics, John; Stanley, Steven J, E-mail: Eduardo.Farfan@srnl.doe.go

    2010-11-01

    The UK's National Nuclear Laboratory (NNL) has developed a radiation-mapping device that can locate and quantify radioactive hazards within contaminated areas of the nuclear industry. The device, known as RadBall{sup TM}, consists of a colander-like outer collimator that houses a radiation-sensitive polymer sphere. The collimator has over two hundred small holes; thus, specific areas of the polymer sphere are exposed to radiation becoming increasingly more opaque in proportion to the absorbed dose. The polymer sphere is imaged in an optical-CT scanner that produces a high resolution 3D map of optical attenuation coefficients. Subsequent analysis of the optical attenuation data provides information on the spatial distribution of sources in a given area forming a 3D characterization of the area of interest. The RadBall{sup TM} technology has been deployed in a number of technology trials in nuclear waste reprocessing plants at Sellafield in the UK and facilities of the Savannah River National Laboratory (SRNL). This paper summarizes the tests completed at SRNL Health Physics Instrument Calibration Laboratory (HPICL).

  19. Advances in dental materials.

    Science.gov (United States)

    Fleming, Garry J P

    2014-05-01

    The dental market is replete with new resorative materials marketed on the basis of novel technological advances in materials chemistry, bonding capability or reduced operator time and/or technique sensitivity. This paper aims to consider advances in current materials, with an emphasis on their role in supporting contemporary clinical practice.

  20. MIT Lincoln Laboratory Annual Report 2008: Technology in Support of National Security

    Science.gov (United States)

    2008-01-01

    were solicited. In December 2006, a Lincoln Laboratory team (Robert Galejs, Jonathan Williams, and Siddhartha Krishnamurthy) was formed (using New...Galejs, Jonathan Williams, and Siddhartha Krishnamurthy, worked on the radar techniques for MIt’s urban Challenge vehicle. Since the final Urban

  1. How-To-Do-It: Recombinant DNA Technology in the High School Biology Laboratory.

    Science.gov (United States)

    Myers, Richard

    1988-01-01

    Describes a basic biotechnology investigation that includes restriction and ligation of plasmid DNA, transformation of bacteria and cloning of these bacterial cells. Discusses laboratory procedures and another activity in the identification of unknown plasmids by studying agarose gel electrophoresis photographs. (CW)

  2. National Fuel Cell Technology Evaluation Center (NFCTEC); (NREL) National Renewable Energy Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Jennifer; Sprik, Sam

    2014-03-11

    This presentation gives an overview of the National Fuel Cell Technology Evaluation Center (NFCTEC), describes how NFCTEC benefits the hydrogen and fuel cell community, and introduces a new fuel cell cost/price aggregation project.

  3. Field and laboratory notes on instream research - Research and Development of New Marking and Monitoring Technologies

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project addresses how to expand the current fish-tracking technologies to enable the fisheries community to successfully carry out the actions, research, and...

  4. A layered approach to technology transfer of AVIRIS between Earth Search Sciences, Inc. and the Idaho National Engineering Laboratory

    Science.gov (United States)

    Ferguson, James S.; Ferguson, Joanne E.; Peel, John, III; Vance, Larry

    1995-01-01

    Since initial contact between Earth Search Sciences, Inc. (ESSI) and the Idaho National Engineering Laboratory (INEL) in February, 1994, at least seven proposals have been submitted in response to a variety of solicitations to commercialize and improve the AVIRIS instrument. These proposals, matching ESSI's unique position with respect to agreements with the National Aeronautics and Space Administration (NASA) and the Jet Propulsion Laboratory (JPL) to utilize, miniaturize, and commercialize the AVIRIS instrument and platform, are combined with the applied engineering of the INEL. Teaming ESSI, NASA/JPL, and INEL with diverse industrial partners has strengthened the respective proposals. These efforts carefully structure the overall project plans to ensure the development, demonstration, and deployment of this concept to the national and international arenas. The objectives of these efforts include: (1) developing a miniaturized commercial, real-time, cost effective version of the AVIRIS instrument; (2) identifying multiple users for AVIRIS; (3) integrating the AVIRIS technology with other technologies; (4) gaining the confidence/acceptance of other government agencies and private industry in AVIRIS; and (5) increasing the technology base of U.S. industry.

  5. Theme: Laboratory Facilities Improvement.

    Science.gov (United States)

    Miller, Glen M.; And Others

    1993-01-01

    Includes "Laboratory Facilities Improvement" (Miller); "Remodeling Laboratories for Agriscience Instruction" (Newman, Johnson); "Planning for Change" (Mulcahy); "Laboratory Facilities Improvement for Technology Transfer" (Harper); "Facilities for Agriscience Instruction" (Agnew et al.); "Laboratory Facility Improvement" (Boren, Dwyer); and…

  6. Assessment Report Sandia National Laboratories Fuel Cycle Technologies Quality Assurance Evaluation of FY15 SNL FCT M2 Milestone Deliverables

    Energy Technology Data Exchange (ETDEWEB)

    Appel, Gordon John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-05-01

    Sandia National Laboratories (SNL) Fuel Cycle Technologies (FCT) program activities are conducted in accordance with FCT Quality Assurance Program Document (FCT-QAPD) requirements. The FCT-QAPD interfaces with SNL approved Quality Assurance Program Description (SNL-QAPD) as explained in the Sandia National Laboratories QA Program Interface Document for FCT Activities (Interface Document). This plan describes SNL's FY16 assessment of SNL's FY15 FCT M2 milestone deliverable's compliance with program QA requirements, including SNL R&A requirements. The assessment is intended to confirm that SNL's FY15 milestone deliverables contain the appropriate authenticated review documentation and that there is a copy marked with SNL R&A numbers.

  7. A novel root analogue dental implant using CT scan and CAD/CAM: selective laser melting technology.

    Science.gov (United States)

    Figliuzzi, M; Mangano, F; Mangano, C

    2012-07-01

    Direct laser metal forming (DLMF) is a new technique which allows solids with complex geometry to be produced by annealing metal powder microparticles in a focused laser beam, according to a computer-generated three-dimensional (3D) model. For dental implants, the fabrication process involves the laser-induced fusion of titanium microparticles, in order to build, layer by layer, the desired object. Modern computed tomography (CT) acquisition and 3D image conversion, combined with the DLMF process, allows the fabrication of custom-made, root-analogue implants (RAI), perfect copies of the radicular units that need replacing. This report demonstrates the successful clinical use of a custom-made, root-analogue DLMF implant. CT images of the residual non-restorable root of a right maxillary premolar were acquired and modified with specific software into a 3D model. From this model, a custom-made, root-analogue, DLMF implant was fabricated. Immediately after tooth extraction, the root-analogue implant was placed in the extraction socket and restored with a single crown. At the 1-year follow-up examination, the custom-made implant showed almost perfect functional and aesthetic integration. The possibility of fabricating custom-made, root-analogue DLMF implants opens new interesting perspectives for immediate placement of dental implants.

  8. The impact of active versus passive use of 3D technology: a study of dental students at Wuhan University, China.

    Science.gov (United States)

    Qi, Shengcai; Yan, Yanhong; Li, Rong; Hu, Jian

    2013-11-01

    A variety of computer-based 3D applications are becoming regular tools for dental students for self-learning. This study investigated the learning effectiveness of junior dental students in passively versus actively controlling the 3D virtual scenes of implant dentistry. Participants were randomized into three groups and were exposed to three designs of educational materials: traditional 2D webpages (2D); active-controlling 3D webpages (A3); and passive-controlling 3D webpages (P3). After reviewing the webpages, the participants were asked to complete a posttest to assess the relative quality of information acquisition. Their responses were compared and analyzed. The results indicated that the P3 group received the highest score of 26.4±3.1 on the post-test, significantly better than the A3 group, which had the worst performance with a score of 20.3±4.0. The 2D group received a score of 24.2±4.6. There was a significant correlation between the scores on a mental rotations test and the subjects' performance on the posttest (pvirtual reality assisted self-learning, passive control produces higher learning effects compared to active control. Too much active control may generate significantly negative impacts on students, especially for individuals with low spatial ability.

  9. Oak Ridge National Laboratory Annual Progress Report for the Electric Drive Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Ozpineci, Burak [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-10-01

    The US Department of Energy (DOE) announced in May 2011 a new cooperative research effort comprising DOE, the US Council for Automotive Research (composed of automakers Ford Motor Company, General Motors Company, and Chrysler Group), Tesla Motors, and representatives of the electric utility and petroleum industries. Known as U.S. DRIVE (Driving Research and Innovation for Vehicle efficiency and Energy sustainability), it represents DOE’s commitment to developing public–private partnerships to fund high-risk–high-reward research into advanced automotive technologies. The new partnership replaces and builds upon the partnership known as FreedomCAR (derived from “Freedom” and “Cooperative Automotive Research”) that ran from 2002 through 2010 and the Partnership for a New Generation of Vehicles initiative that ran from 1993 through 2001. Oak Ridge National Laboratory’s (ORNL’s) Electric Drive Technologies (EDT) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor (EM), and traction drive system (TDS) technologies that will leapfrog current on-the-road technologies, leading to lower cost and better efficiency in transforming battery energy to useful work. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency through research in more efficient TDSs. In supporting the development of advanced vehicle propulsion systems, the EDT subprogram fosters the development of technologies that will significantly improve efficiency, costs, and fuel economy

  10. ENVIRONMENTAL TECHNOLOGY VERIFICATION: JOINT (NSF-EPA) VERIFICATION STATEMENT AND REPORT FOR THE REMOVAL OF MERCURY FROM DENTAL OFFICE WASTEWATER, DENTAL RECYCLING OF NORTH AMERICA (DRNA) MERCURY REMOVAL UNIT (MRU). - NSF 02/01/EPAWQPC-SWP

    Science.gov (United States)

    Verification testing of the Dental Recycling North America (DRNA) Mercury Removal Unit (MRU) was conducted over a seven week period, at a dental office in Michigan that had three operatory rooms and two hygiene rooms. The office operated four days per week and averaged approxiam...

  11. Implementation of cleanroom technology in reproductive laboratories: the question is not why but how.

    Science.gov (United States)

    Esteves, Sandro C; Bento, Fabiola C

    2016-01-01

    Two articles recently published in Reproductive BioMedicine Online described how fertility centres in the USA and Brazil implemented air quality control to newly designed facilities. In both case scenarios, a highly efficient air filtration was achieved by installing a centred system supplying filtered air to the IVF laboratory and other critical areas, combining air particulate and volatile organic compound (VOC) filtration. Evaluating retrospective data of over 3000 cycles from both centres, live birth rates were increased by improvements in air quality and laboratory environment. This commentary discusses some of the key aspects of air contamination in the IVF settings, and highlights the fact that a risk management analysis taking into consideration all variables that play a role in air contamination is paramount for the reduction of the risk of poor IVF outcomes due to improper air quality conditions.

  12. Walk-through survey report: control technology for fermentation processes at Wyeth Laboratories, Inc. , West Chester, Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, K.F.

    1985-10-01

    A walk-through survey was conducted at Wyeth Laboratories, Incorporated, West Chester, Pennsylvania in November, 1983. The purpose of the survey was to evaluate the control technology for the fermentation processes. The facility produced penicillin-V and penicillin-G using the microbial strain Penicillium-chrysogenum. Medical examinations were available for fermentation and extraction process workers. Safety shoes and glasses and disposable dust respirators were provided. The author concludes that Wyeth has in operation an apparently effective system of control measures.

  13. Science and technology for a sustainable energy future: Accomplishments of the Energy Efficiency and Renewable Energy Program at Oak Ridge National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.A.; Vaughan, K.H.

    1995-03-01

    Accomplishments of the Energy Efficiency and Renewable Energy Program at the Oak Ridge National Laboratory are presented. Included are activities performed in the utilities, transportation, industrial, and buildings technology areas.

  14. Chemical Microsensor and Micro-Instrument Technology at Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Butler, M.A.; Frye-Mason, G.C.; Hughes, R.C.; Osbourn, G.C.

    1999-03-26

    Important factors in the application of chemical sensing technology to space applications are low mass, small size, and low power. All of these attributes are enabled by the application of MEMS and micro-fabrication technology to chemical sensing. Several Sandia projects that apply these technologies to the development of new chemical sensing capabilities with the potential for space applications will be described. The Polychromator project is a joint project with Honeywell and MIT to develop an electrically programmable diffraction grating that can be programmed to synthesize the spectra of molecules. This grating will be used as the reference cell in a gas correlation radiometer to enable remote chemical detection of most chemical species. Another area of research where micro-fabrication is having a large impact is the development of a lab on a chip. Sandia's efforts to develop the {mu}ChemLab{trademark} will be described including the development of microfabricated pre-concentrators, chromatographic columns, and detectors. Chemical sensors are evolving in the direction of sensor arrays with pattern recognition methods applied to interpret the pattern of response. Sandia's development of micro-fabricated chemiresistor arrays and the VERI pattern recognition technology to interpret the sensor response will be described.

  15. 75 FR 53075 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2010-08-30

    ... technology directorate/functional area to implement the ``same mission'' principal. With this definition, the... Specialist, 0030 Fitness and Sports Specialist, 0080 Security Administration, 0099 Security Student Trainee... levels and in the exercise of bump and retreat rights. The same flexibilities for attracting...

  16. From the Laboratory to the Classroom: A Technology-Intensive Curriculum for Functions and Graphs.

    Science.gov (United States)

    Magidson, Susan

    1992-01-01

    Addresses the challenges, risks, and rewards of teaching about linear functions in a technology-rich environment from a constructivist perspective. Describes an algebra class designed for junior high school students that focuses of the representations and real-world applications of linear functions. (MDH)

  17. Building a Better Biology Lab? Testing Tablet PC Technology in a Core Laboratory Course

    Science.gov (United States)

    Pryor, Gregory; Bauer, Vernon

    2008-01-01

    Tablet PC technology can enliven the classroom environment because it is dynamic, interactive, and "organic," relative to the rigidity of chalkboards, whiteboards, overhead projectors, and PowerPoint presentations. Unlike traditional computers, tablet PCs employ "digital linking," allowing instructors and students to freehand annotate, clarify,…

  18. An Undergraduate Laboratory Class Using CRISPR/Cas9 Technology to Mutate Drosophila Genes

    Science.gov (United States)

    Adame, Vanesa; Chapapas, Holly; Cisneros, Marilyn; Deaton, Carol; Deichmann, Sophia; Gadek, Chauncey; Lovato, TyAnna L.; Chechenova, Maria B.; Guerin, Paul; Cripps, Richard M.

    2016-01-01

    CRISPR/Cas9 genome editing technology is used in the manipulation of genome sequences and gene expression. Because of the ease and rapidity with which genes can be mutated using CRISPR/Cas9, we sought to determine if a single-semester undergraduate class could be successfully taught, wherein students isolate mutants for specific genes using…

  19. The importance of the technologically able social innovators and entrepreneurs: A US National Laboratory Perspective

    NARCIS (Netherlands)

    Chavez, Victor; Stinnett, Regan; Tierney, Robert; Tierney, Robert; Walsh, Steven Thomas

    2017-01-01

    A country's National Innovation Policies (NIP) often center on military, energy or other national security missions. Yet many countries' NIPs have resulted in tremendous societal benefit through both planned and unplanned action not associated with these goals. Socially important technology product

  20. An Undergraduate Laboratory Class Using CRISPR/Cas9 Technology to Mutate Drosophila Genes

    Science.gov (United States)

    Adame, Vanesa; Chapapas, Holly; Cisneros, Marilyn; Deaton, Carol; Deichmann, Sophia; Gadek, Chauncey; Lovato, TyAnna L.; Chechenova, Maria B.; Guerin, Paul; Cripps, Richard M.

    2016-01-01

    CRISPR/Cas9 genome editing technology is used in the manipulation of genome sequences and gene expression. Because of the ease and rapidity with which genes can be mutated using CRISPR/Cas9, we sought to determine if a single-semester undergraduate class could be successfully taught, wherein students isolate mutants for specific genes using…

  1. Analysis: linking laboratory data to human factors and inclusion of persons with disabilities in diabetes technology research.

    Science.gov (United States)

    Williams, Ann S

    2011-09-01

    In this issue of Journal of Diabetes Science and Technology, Friedrichs and colleagues present a study of the injection force of four reusable insulin pens and another study of the dosing accuracy of three different insulin pens. For the study of injection force, the authors claim that lower injection force has numerous advantages for patients, including making use of pens easier for people with decreased hand strength. For the study of dosing accuracy, the authors state that dose accuracy is critical for glycemic control. Both study designs have significant strengths, including measurements of the variable of interest using two different methodologies and thorough documentation of methods and materials. However, the careful, precise measurements of injection force and dosing accuracy are not matched by equivalent precision supporting the significance of the studies. The authors do not provide any information about what measured injection force is easy or difficult for individuals with and without manual problems or what level of dosing inaccuracy is clinically significant. Therefore, the implications for practice remain unclear. Data about these and other relevant human factors are needed to provide meaningful context for laboratory measurements of diabetes technologies. Furthermore, researchers conducting studies of diabetes technology that include human subjects should intentionally recruit persons with disabilities so diabetes care professionals can know whether and how technical information about diabetes technology applies to the full range of patients, including those with disabilities.

  2. Student motivation in a high school science laboratory: The impact of computers and other technologies on young adolescent physics students

    Science.gov (United States)

    Clark, Stephen Allan

    The impact of technology (including computers and probes, low friction carts, video camera, VCR's and electronic balances) on the motivation of adolescent science students was investigated using a naturalistic case study of college preparatory ninth grade physics classes at a comprehensive high school in the southeastern United States. The students were positively affected by the use of computer technology as compared to other "low tech" labs. The non-computer technologies had little motivational effect on the students. The most important motivational effect was the belief among the students that they could successfully operate the equipment and gather meaningful results. At times, the students spent more cognitive energy on performing the experiment than on learning the physics. This was especially true when microcomputer-based labs were used. When the technology led to results that were clear to the students and displayed in a manner that could be easily interpreted, they were generally receptive and motivated to persist at the task. Many students reported being especially motivated when a computer was used to gather the data because they "just liked computers." Furthermore, qualitative evidence suggested that they had learned the physics concept they were working on. This is in close agreement with the conceptual change model of learning in that students are most likely to change their prior conceptions when the new idea is plausible (the technology makes it so), intelligible (real time graphing, actual light rays), and fruitful (the new idea explains what they actually see). However, many of the microcomputer-based laboratory (MBL) activities and "high tech" labs were too unstructured, leaving students bewildered, confused and unmotivated. To achieve maximum motivational effects from the technology, it was necessary to reduce the cognitive demand on the students so they could concentrate on the data gathered rather than the operation of the equipment.

  3. Request for Information from entities interested in commercializing Laboratory-developed advanced in vitro assessment technology

    Energy Technology Data Exchange (ETDEWEB)

    Intrator, Miranda Huang [Los Alamos National Laboratory

    2016-03-30

    Los Alamos National Security, LLC (LANS) is the manager and operator of Los Alamos National Laboratory (Los Alamos) for the U.S. Department of Energy National Nuclear Security Administration under contract DE-AC52- 06NA25396. Los Alamos is a mission-centric Federally Funded Research and Development Center focused on solving critical national security challenges through science and engineering for both government and private customers. LANS is opening this formal Request for Information (RFI) to gauge interest in engaging as an industry partner to LANS for collaboration in advancing the bio-assessment platform described below. Please see last section for details on submitting a Letter of Interest.

  4. Laboratory analyses of selected technological parameters of water-ash mixtures - use in underground mining

    Energy Technology Data Exchange (ETDEWEB)

    Stryczek, S.; Postawa, J. (Akademia Gorniczo-Hutnicza, Cracow (Poland))

    1989-01-01

    Physical properties of a mixture of fly ash with water were investigated under laboratory conditions. Water:fly ash ratio was 1:1.5, 1:2.0, 1:2.5 or 1:3.0, mixing time ranged from 1 min to 15 min, rotation rate of the mixer ranged from 400 to 800 rpm. The following parameters were investigated: specific density, viscosity, structural strength, rheological properties, creep, settling rate. Effects of physical mixture properties on its use as a packing in underground coal mines are analyzed (hydraulic transport and stowing, prevention of spontaneous coal combustion etc.). 9 refs.

  5. Pacific Northwest Laboratory report on fusion reactor technology, April 1976 - June 1976

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-07-01

    This quarterly report consists of progress summaries of research conducted by the staff of Pacific Northwest Laboratories (PNL). This reporting period includes progress made from April 1, 1976 through June 30, 1976. The summaries are presented in four major categories of: (1) fusion systems engineering, (2) material research and radiation environment simulation, (3) environmental effects of fusion concepts, and (4) manpower development. At the beginning of each section is a brief summary of the reports making up the section. The reports themselves have been kept relatively short and include preliminary results which ultimately are expected to be published elsewhere.

  6. Massive Open Online Courses in Dental Education: Two Viewpoints: Viewpoint 1: Massive Open Online Courses Offer Transformative Technology for Dental Education and Viewpoint 2: Massive Open Online Courses Are Not Ready for Primetime.

    Science.gov (United States)

    Kearney, Rachel C; Premaraj, Sundaralingam; Smith, Becky M; Olson, Gregory W; Williamson, Anne E; Romanos, Georgios

    2016-02-01

    This point/counterpoint article discusses the strengths and weaknesses of incorporating Massive Open Online Courses (MOOCs) into dental education, focusing on whether this relatively new educational modality could impact traditional dental curricula. Viewpoint 1 asserts that MOOCs can be useful in dental education because they offer an opportunity for students to learn through content and assessment that is delivered online. While specific research on MOOCs is limited, some evidence shows that online courses may produce similar learning outcomes to those in face-to-face courses. Given that MOOCs are intended to be open source, there could be opportunities for dental schools with faculty shortages and financial constraints to incorporate these courses into their curricula. In addition to saving money, dental schools could use MOOCs as revenue sources in areas such as continuing education. Viewpoint 2 argues that the hype over MOOCs is subsiding due in part to weaker than expected evidence about their value. Because direct contact between students, instructors, and patients is essential to the dental curriculum, MOOCs have yet to demonstrate their usefulness in replacing more than a subset of didactic courses. Additionally, learning professionalism, a key component of health professions education, is best supported by mentorship that provides significant interpersonal interaction. In spite of the potential of early MOOC ideology, MOOCs in their current form require either further development or altered expectations to significantly impact dental education.

  7. An investigative laboratory course in human physiology using computer technology and collaborative writing.

    Science.gov (United States)

    FitzPatrick, Kathleen A

    2004-12-01

    Active investigative student-directed experiences in laboratory science are being encouraged by national science organizations. A growing body of evidence from classroom assessment supports their effectiveness. This study describes four years of implementation and assessment of an investigative laboratory course in human physiology for 65 second-year students in sports medicine and biology at a small private comprehensive college. The course builds on skills and abilities first introduced in an introductory investigations course and introduces additional higher-level skills and more complex human experimental models. In four multiweek experimental modules, involving neuromuscular, reflex, and cardiovascular physiology, by use of computerized hardware/software with a variety of transducers, students carry out self-designed experiments with human subjects and perform data collection and analysis, collaborative writing, and peer editing. In assessments, including standard course evaluations and the Salgains Web-based evaluation, student responses to this approach are enthusiastic, and gains in their skills and abilities are evident in their comments and in improved performance.

  8. Digital signature of electronic dental records.

    Science.gov (United States)

    Maruo, Ivan Toshio; Maruo, Hiroshi

    2012-05-01

    The purpose of this article is to examine the feasibility of digital signature technology to guarantee the legal validation of electronic dental records. The possible uses of digital signature technology, the actual use of digital signature technology to authenticate electronic dental records, the authentication of each part of the electronic dental record, the general legal principles involved, how to digitally sign electronic dental record files, and the limitations of this method are discussed. It is possible to obtain electronic dental records that carry the same legal certainty as conventional, nonelectronic records. For this purpose, each part of the electronic dental records should be digitally signed by the author of the document. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  9. Educational techno mobile laboratory: robotics courses for low cost scientific and technological literacy

    Directory of Open Access Journals (Sweden)

    Jonathan Germain Ortiz Meza

    2012-11-01

    Full Text Available The robotics in education is a multidisciplinary branch of the engineering that has been an invaluable asset to promote the science and the technology as something fun. However, the high costs for the implementation as also the difficulty to train instructors have made the robotics more common only in first world countries, because generally they have more educational budget for this practices. For this reason the Educational Techno Mobile Lab was created; this Lab incorporates robotics courses based on BEAM robots and also sciences and cognitive practices. The objective of the Project is to create a new concept of learning based on a techno educative platform with the finality to promote the scientific and technological literacy to the development of knowledge and critical scientific thinking. The results of the evaluation present a 36% of improvement related science and technology knowledge on fourth grade students; these results show the necessity to incorporate a given robotic course to all the public education level.

  10. Confidence level in performing endodontic treatment among final year undergraduate dental students from the University of Medical Science and Technology, Sudan (2014

    Directory of Open Access Journals (Sweden)

    Elhadi Mohieldin Awooda

    2016-01-01

    Full Text Available Aim: This study is aimed to evaluate the confidence level of undergraduate final year dental students in performing root canal treatment (RCT and how it may affect their performance and perception regarding endodontics. Materials and Methods: A self-administered questionnaire was distributed to the final year dental students, at the University of Medical Sciences and Technology, Khartoum, Sudan (2013–2014. A total of 21 students were requested to participate voluntary and were asked to score their level of confidence using a 5-point Likert's scale. Results: Response rate was 100%, all the students (100% stated that the requirements set were enough, and 66.7% rated endodontic as average in terms of difficulty. When rating the mean of self-confidence for performing RCT in the dentition, maxillary teeth (2.43 ± 0.51 followed by mandibular teeth (2.71 ± 0.64 were higher, whereas the molars were the least. Higher scores of self-confidence were in administrating local anesthesia (4.24 ± 0.70, followed by root canal shaping by hand instrument (3.76 ± 0.54. No association was found between overall confidence level and the number of performed RCT (P = 0.721. No association was found between overall confidence level of students who were subjected to instrument fracture and their frequency of fracture (P = 0.507, supervisor' reaction (P = 0.587, and willingness to specialize in endodontics (P = 0.530. Conclusion: Students displayed high confidence in performing basic endodontic and treating single-rooted teeth. More exposure is recommended to enhance the students' self-confidence.

  11. 牙种植体表面处理技术的新进展%New Advances in the Surface Treatment Technology of Dental Implant Reviewed

    Institute of Scientific and Technical Information of China (English)

    于开涛; 舒瑶; 邹敬才

    2012-01-01

    随着口腔技术的发展及全瓷种植体的广泛应用,对于牙种植体表面处理技术的要求越来越高,牙种植体表面粗化的处理方法是指采用机械或者化学方法在植体表面形成符合形态的微结构或者同位结构,扩大其黏结面积,使其表面活化,增强其表面的自由能,并增强了瓷和树脂黏结性.目前国内外常用的表面处理的方法有机械法和化学法,主要技术包括机械打磨、肽气喷覆(TPS)、酸蚀(etching)、喷砂(sand blasting)、改良喷砂、激光蚀刻、硅涂层和联合使用等,随着技术的发展,开发出多种植体.%With the development of stomatology technology and the wide application of full-ceramic implant,there are higher requirements on the surface treatment technology of dental implant.The treatment method for the surface roughening of the dental implant refers to the adoption of the mechanical or chemical means to construct the micro-structure or appositive structure with the appropriate forms on the surface of the implant to expand the bonding area,activate the surface,enhance its free energy and thus intensify the bonding of the ceramic and resin.Presently,the common surface treatment methods include the mechanical and chemical ones both at home and abroad,such as the technical grinding,Ti plasma spraying (TPS),etching,sand blasting,refined blasting,laser etching,silicon coating and combined adoption.There have been various implants as the technology develops.

  12. Multidisciplinary full-mouth restoration with porcelain veneers and laboratory-fabricated resin inlays.

    Science.gov (United States)

    Narcisi, E M; DiPerna, J A

    1999-08-01

    Recent advances in dental materials, laboratory technology, and adhesive protocols have significantly expanded the contemporary restorative armamentarium. Utilized in combination with comprehensive treatment planning, these innovations enable clinicians to provide enhanced aesthetic care that achieves the increasing expectations of their patients. Using a detailed case presentation, this article highlights the harmonious integration of modern smile design, material selection, and interdisciplinary communication that must be addressed in order to deliver optimal treatment with porcelain laminate veneer and laboratory-fabricated resin inlay restorations.

  13. Virtual petrological microscopy: web 2.0 technology for learning microscopy skills outside the laboratory

    Science.gov (United States)

    Kelley, S. P.; Whalley, P.; Tindle, A.

    2009-12-01

    Learning to use microscopes for geoscience or life science applications is a crucial part of the practical training offered in many science degrees, but the opportunities to study are often constrained by available laboratory space and time, and sometimes constrained by the number of high quality microscopes available. We will demonstrate a new based virtual petrological microscope which offers the opportunity for enhancement and enrichment of laboratory experience in geoscience. The focus of petrological microscope study is not primarily related to learning facts but is concerned with learning how to discriminate and classify within the paradigms of the discipline. In this case, the recognition and measurement of key features in rock samples in hand specimen and thin section. Whilst undertaking the practical exercise of recognition and naming of rock samples students are really being required to develop an understanding of the rock cycle as a model representing the relationship between rock categories and the process of their formation. The problems of teaching with complex visual materials, in effect of teaching learners 'how to see' from the scientific perspective of a particular discipline, are quite general. It could reasonably be expected that lessons learnt from the implementation and detailed evaluation of the proposed web-based system will generalise to many other topics in science education. Thus we focussed on the thin section images rather than reproducing a system that resembled a physical microscope. The virtual petrological microscope developed for a course at the Open University UK enables student acquisition of skills such as mineral and rock recognition using a browser window to explore thin sections of rocks as if they were using a laboratory microscope. The microscope allows students to pan around the thin sections (held as 1GB files on a remote server); zoom in and out, change from plane polarised light to cross polarised light conditions, and

  14. The dental health and technology. Contributions and contradictions La salud estomatológica y la tecnología. Aportes y contradicciones

    Directory of Open Access Journals (Sweden)

    Irma Sueiro Sánchez

    2010-07-01

    Full Text Available The situation of the Stomatology in the contemporary world demands to the society the recognition technology needs as a key factor for their development. Presently article is meditated on the narrow existent relationship between the terms information, technology and health in Stomatology and some contradictions that reveal the importance of understanding the techno-science, demonstrating the importance of this relationship as the basis and driving force which will result in the development related to health, which will help to improve every day functioning and quality of dental services.La situación de la Estomatología en el mundo contemporáneo exige a la sociedad el reconocimiento de las necesidades tecnológicas como un factor clave para su desarrollo. En el presente artículo se reflexiona sobre la estrecha relación existente entre los términos información, tecnología y salud en Estomatología y se valoran algunas contradicciones que revelan la importancia de la comprensión de la tecno-ciencia, demostrándose la importancia de esta interrelación como base y fuerza impulsora que redundará en el desarrollo vinculado a la salud, lo cual contribuirá a mejorar cada día más el funcionamiento y la calidad de los servicios de Estomatología.

  15. A Different Approach to Have Science and Technology Student-Teachers Gain Varied Methods in Laboratory Applications: A Sample of Computer Assisted POE Application

    Science.gov (United States)

    Saka, Arzu

    2012-01-01

    The purpose of this study is to develop a new approach and assess the application for the science and technology student-teachers to gain varied laboratory methods in science and technology teaching. It is also aimed to describe the computer-assisted POE application in the subject of "Photosynthesis-Light" developed in the context of…

  16. Series of selenoid valve pneumatic AC 220 volts with disposable contra angle as a replacement for micromotor in preclinic laboratory (experimental study on the health ministry of health polytechnic course D-III department of dental nursing Tasikmalaya

    Directory of Open Access Journals (Sweden)

    Hadiyat Miko

    2016-06-01

    Full Text Available To report on the essential performance characteristics of disposable air turbine handpiece and on aspect of their convenience and safety for preclinical use. The disposable handpiece is not recommended drilling in oral cavity. We use for student practical  in Operative Dentistry at preclinic laboratory. The other side micromotor low speed handpiece used as bur device on the phantom, the problem usually found in preclinik laboratory on practical conservation with the use of micromotor frequent damage to the handpiece (contra angel. Micromotor tend to heat up faster and have a low-speed, so it took a long time to complete the drilling, using the micromotor tend to be less safe because of the power generated from the flow of electricity at any time could damage. The price of  micromotor also is quite expensive. The limitations of the budget funds for maintenance, repair and procurement of mikromotor also became a problem. Based on these problems, the research team made a solution in the form of a replacement tool (substitute micromotor with the aim to resolve the existing problems as well as creating practices preclinic more effectively and efficiently. The use of a simple drill tool in the form of a series of Pneumatic Valve 220 volt (include electric compressor and Selenoid Disposible Handpiece Contra-angles as a new innovation in the laboratory of Dental Nursing. Majors preclinik Health Polytechnic Tasikmalaya  have been applied for last 3 years and have been able to more efficient cost of procurement tool of 70%. This disposible tool is apparently able to drill up to 20 times preparasicavity. This research uses descriptive method. Data collection techniques are used through the question form or questionnaire. Population and sample the study is a students collage 2nd years D-III of department of dental nursing Health Polytechnic Tasikmalaya. From the results of research that the majority of students expressed pleased and satisfied. This

  17. Research Combustion Laboratory (RCL)

    Data.gov (United States)

    Federal Laboratory Consortium — The Research Combustion Laboratory (RCL) develops aerospace propulsion technology by performing tests on propulsion components and materials. Altitudes up to 137,000...

  18. Sandia National Laboratories

    Data.gov (United States)

    Federal Laboratory Consortium — For more than 60 years, Sandia has delivered essential science and technology to resolve the nation's most challenging security issues.Sandia National Laboratories...

  19. Research Combustion Laboratory (RCL)

    Data.gov (United States)

    Federal Laboratory Consortium — The Research Combustion Laboratory (RCL) develops aerospace propulsion technology by performing tests on propulsion components and materials. Altitudes up to 137,000...

  20. Point of care technology or standard laboratory service in an emergency department: is there a difference in time to action? A randomised trial

    DEFF Research Database (Denmark)

    Backer Mogensen, Christian; Borch, Anders; Brandslund, Ivan

    2011-01-01

    Emergency Departments (ED) have a high flow of patients and time is often crucial. New technologies for laboratory analysis have been developed, including Point of Care Technologies (POCT), which can reduce the transport time and time of analysis significantly compared with central laboratory...... services. However, the question is if the time to clinical action is also reduced if a decisive laboratory answer is available during the first contact between the patient and doctor. The present study addresses this question: Does a laboratory answer, provided by POCT to the doctor who first attends...... the patient on admission, change the time to clinical decision in commonly occurring diseases in an ED compared with the traditional service from a central laboratory?...

  1. Research progress on gene chip technology and its applications in dental pulp biology%基因芯片技术在牙髓生物学研究中的应用进展

    Institute of Scientific and Technical Information of China (English)

    龚启梅

    2012-01-01

    Gene chip was a high-throughput, rapid, parallel nucleic acid sequence detection and quantitative analysis technology. It has been widely used in molecular biology in recent years. Study on dental pulp genomics will help to understand the physiological and pathological mechanisms of pulp, thus contributing to the clinical application in prevention, diagnosis and treatment. In this review, we briefly described the gene chip technology and its applications in dental pulp stem cells, aged dental pulp and dental caries.%基因芯片作为一种高通量、快速和平行核酸序列测定及定量分析技术已经广泛地应用于分子生物学领域.牙髓基冈组学的研究将有利于加强人们对牙髓生理和病珲机制的认识,从而最终应用于临床预防、诊断和治疗等,因此,本文就基因芯片技术及其与牙髓干细胞相关的基因、牙髓老龄化改变相关的基因和龋病时牙髓相关的基因等研究进展作一综述.

  2. Importance of energy efficiency in the design of the Process and Environmental Technology Laboratory (PETL) at Sandia National Laboratories, New Mexico (NM)

    Energy Technology Data Exchange (ETDEWEB)

    Wrons, R.

    1998-06-01

    As part of the design of the Process and Environmental Technology Laboratory (PETL) in FY97, an energy conservation report (ECR) was completed. The original energy baseline for the building, established in Title 1 design, was 595,000 BTU/sq. ft./yr, site energy use. Following the input of several reviewers and the incorporation of the various recommendations into the Title 2 design, the projected energy consumption was reduced to 341,000 BTU/sq. ft./yr. Of this reduction, it is estimated that about 150,000 BTU/sq. ft./yr resulted from inclusion of more energy efficient options into the design. The remaining reductions resulted from better accounting of energy consumption between Title 1 ECR and the final ECR. The energy efficient features selected by the outcome of the ECR were: (1) Energy Recovery system, with evaporative cooling assist, for the Exhaust/Make-up Air System; (2) Chilled Water Thermal Storage system; (3) Premium efficiency motors for large, year-round applications; (4) Variable frequency drives for all air handling fan motors; (4) Premium efficiency multiple boiler system; and (5) Lighting control system. The annual energy cost savings due to these measures will be about $165,000. The estimated annual energy savings are two million kWhrs electric, and 168,000 therms natural gas, the total of which is equivalent to 23,000 million BTUs per year. Put into the perspective of a typical office/light lab at SNL/NM, the annual energy savings is equal the consumption of a 125,000 square foot building. The reduced air emissions are approximately 2,500 tons annually.

  3. Oak Ridge National Laboratory (ORNL) Superconducting Technology Program for electric power systems. Annual report for FY 1994

    Energy Technology Data Exchange (ETDEWEB)

    Koncinski, W.S. [ed.; Hawsey, R.A. [comp.

    1994-12-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The three major elements of this program are conductor development, applications development, and the Superconductivity Partnership Initiative. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1994 Annual Program Review held July 19--20, 2994. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to industrial competitiveness projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

  4. Dental OCT

    Science.gov (United States)

    Wilder-Smith, Petra; Otis, Linda; Zhang, Jun; Chen, Zhongping

    This chapter describes the applications of OCT for imaging in vivo dental and oral tissue. The oral cavity is a diverse environment that includes oral mucosa, gingival tissues, teeth and their supporting structures. Because OCT can image both hard and soft tissues of the oral cavity at high resolution, it offers the unique capacity to identity dental disease before destructive changes have progressed. OCT images depict clinically important anatomical features such as the location of soft tissue attachments, morphological changes in gingival tissue, tooth decay, enamel thickness and decay, as well as the structural integrity of dental restorations. OCT imaging allows for earlier intervention than is possible with current diagnostic modalities.

  5. Vitrification as a low-level radioactive mixed waste treatment technology at Argonne National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Mazer, J.J.; No, Hyo J.

    1995-08-01

    Argonne National Laboratory-East (ANL-E) is developing plans to use vitrification to treat low-level radioactive mixed wastes (LLMW) generated onsite. The ultimate objective of this project is to install a full-scale vitrification system at ANL-E capable of processing the annual generation and historic stockpiles of selected LLMW streams. This project is currently in the process of identifying a range of processible glass compositions that can be produced from actual mixed wastes and additives, such as boric acid or borax. During the formulation of these glasses, there has been an emphasis on maximizing the waste content in the glass (70 to 90 wt %), reducing the overall final waste volume, and producing a stabilized low-level radioactive waste glass. Crucible glass studies with actual mixed waste streams have produced alkali borosilicate glasses that pass the Toxic Characteristic Leaching Procedure (TCLP) test. These same glass compositions, spiked with toxic metals well above the expected levels in actual wastes, also pass the TCLP test. These results provide compelling evidence that the vitrification system and the glass waste form will be robust enough to accommodate expected variations in the LLMW streams from ANL-E. Approximately 40 crucible melts will be studied to establish a compositional envelope for vitrifying ANL-E mixed wastes. Also being determined is the identity of volatilized metals or off-gases that will be generated.

  6. Separation technologies for the treatment of Idaho National Engineering Laboratory wastes

    Energy Technology Data Exchange (ETDEWEB)

    Todd, T.A. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

    1997-10-01

    Currently about 6.8 million L of acidic, radioactive liquid waste that is not amenable to calcination, and about 3800 m{sup 3} of calcine exist at the ICPP. Legal drivers (court orders) and agreements between the state of Idaho, the U.S. Navy, and DOE exist that obligate INEL to develop, demonstrate, and implement technologies for treatment and interim storage of the radioactive liquid and calcine wastes. Per these agreements, all tank waste must be removed from the underground liquid storage tanks by the year 2012, and high-level radioactive waste must be treated and removed from INEL by 2035. Separation of the radionuclides from the wastes, followed by immobilization of the high-activity and low-activity fractions in glass and grout, respectively, is the approach preferred by INEL. Technologies to remove actinides (U, Np, Pu, and Am), Cs, Sr, and possibly Tc from highly acidic solutions are required to process INEL wastes. Decontamination of the wastes to NRC Class A low-level waste (LLW) is planned. Separation and isolation of Resource Conservation and Recovery Act (RCRA) metals (Hg, Pb, Cd, and Cr) from the highly radioactive waste streams may also be required. Remediation efforts will begin in FY 1997 to remove volatile organic compounds (VOCs) and radionuclides (Cs and Sr) from groundwater located at the Test Area North facility at INEL. A plume of VOCs and radionuclides has spread from the former TSF-05 injection well, and a Comprehensive Environmental Response, Conservation, and Liability Act (CERCLA) remediation action is under way. A Record of Decision was signed in August 1995 that commits INEL to remediate the plume from TSF-05. Removal of Sr and Cs from the groundwater using commercially available ion-exchange resins has been unsuccessful at meeting maximum contaminant levels, which are 119 pCi/L and 8 pCi/L for Cs and Sr, respectively. Cesium and Sr are the major contaminants that must be removed from the groundwater.

  7. Preventive Dental Practices Motivational Model for Elementary Teachers in Training Institutions; Dental Health Instruction Project. Final Report.

    Science.gov (United States)

    Dennison, Darwin

    An investigation was conducted to determine the effects of instruction upon the dental health behavior of university students. The experimental group of 68 subjects, all elementary education majors, were exposed to a three--stage dental health motivational model: Dental Health Skills Instruction (four hours of laboratory instruction), Cognitive…

  8. Hanford High-Level Waste Vitrification Program at the Pacific Northwest National Laboratory: technology development - annotated bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Larson, D.E.

    1996-09-01

    This report provides a collection of annotated bibliographies for documents prepared under the Hanford High-Level Waste Vitrification (Plant) Program. The bibliographies are for documents from Fiscal Year 1983 through Fiscal Year 1995, and include work conducted at or under the direction of the Pacific Northwest National Laboratory. The bibliographies included focus on the technology developed over the specified time period for vitrifying Hanford pretreated high-level waste. The following subject areas are included: General Documentation; Program Documentation; High-Level Waste Characterization; Glass Formulation and Characterization; Feed Preparation; Radioactive Feed Preparation and Glass Properties Testing; Full-Scale Feed Preparation Testing; Equipment Materials Testing; Melter Performance Assessment and Evaluations; Liquid-Fed Ceramic Melter; Cold Crucible Melter; Stirred Melter; High-Temperature Melter; Melter Off-Gas Treatment; Vitrification Waste Treatment; Process, Product Control and Modeling; Analytical; and Canister Closure, Decontamination, and Handling

  9. U.S. Dental School Deans’ Perceptions of the Rising Cost of Dental Education and Borrowing Pressures on Dental Students: Report of Survey Results.

    Science.gov (United States)

    McAllister, Dora Elías; Garrison, Gwen E; Feldman, Cecile A; Anderson, Eugene L; Cook, Bryan J; Valachovic, Richard W

    2015-06-01

    This report presents findings from a survey of U.S. dental school deans designed to capture their perceptions regarding the rising cost of dental education and its impact on borrowing by dental students to finance their education. The survey included questions about factors influencing the cost of dental education, concerns about dental student borrowing, and financial awareness resources for students. The survey was distributed to the deans of all 63 U.S. dental schools in January 2013; 42 deans responded, for a 67% response rate. The results indicate that, according to the responding deans, new clinical technologies, technology costs, and central university taxes are the main factors that contribute to the increasing cost of dental education. Coupled with reduced state appropriations at public dental schools and declines in private giving at all dental schools, dental school deans face a perplexing set of financial management challenges. Tuition and fees are a primary source of revenue for all dental schools; however, many deans do not have total control over the cost of attending their schools since tuition and fees are often tied to mandates and policies from the parent university and the state legislature. The findings of this study indicate that U.S. dental school deans are aware of and concerned about the impact of increases in tuition and fees on dental student debt and that they are using a variety of strategies to address the growth in dental student borrowing.

  10. Firing temperature accuracy of four dental furnaces.

    Science.gov (United States)

    Haag, Per; Ciber, Edina; Dérand, Tore

    2011-01-01

    In spite of using recommended firing and displayed temperatures, low-fired dental porcelain more often demonstrates unsatisfactory results after firing than porcelain fired at higher temperatures. It could therefore be anticipated that temperatures shown on the display are incorrect, implying that the furnace does not render correct firing programs for low-fired porcelain. The purpose of this study is to investigate deviations from the real temperature during the firing process and also to illustrate the service and maintenance discipline of furnaces at dental laboratories. Totally 20 units of four different types of dental furnaces were selected for testing of temperature accuracy with usage of a digital temperature measurement apparatus, Therma 1. In addition,the staffs at 68 dental laboratories in Sweden were contacted for a telephone interview on furnace brand and on service and maintenance program performed at their laboratories. None of the 20 different dental furnaces in the study could generate the firing temperatures shown on the display, indicating that the hypothesis was correct. Multimat MCII had the least deviation of temperature compared with displayfigures. 62 out of 68 invited dental laboratories chose to participate in the interviews and the result was that very few laboratories had a service and maintenance program living up to quality standards. There is room for improving the precision of dental porcelain furnaces as there are deviations between displayed and read temperatures during the different steps of the firing process.

  11. 构建高职《口腔修复学》精品课程的实践%The experiences of making the exquisite course of 《 Dental restoration 》 in Higher Vocational Technology College

    Institute of Scientific and Technical Information of China (English)

    刘建东; 刘曼丽; 方兆奇

    2011-01-01

    Dental restoration is the main course of oral medical profession, but also the main skills test items for oral professional technical personnel, and it is that the making the exquisite course of Dental restoration is the effective measures to cultivate practical and skilled talents in higher vocational technology college. Objectives The objective is to reform the traditional teaching mode, teaching method and teaching innovation concept; to update the talent cultivation plan of practical professional skills; to increase the skill training and enhance the practice ability for talent; to cultivate skilled practical talents who are needed by society through imitate the clinic. Methods Because Dental restoration is in the ascendant in profession, skill, door, workmanship, so in order to achieve the teaching goal, we shall break the teaching routine as integrated with laboratory, the classroom, the harmony, the theory and the practice teaching and teaching. Specific practices are as follow: Guided by teaching skill, skill training for the center to skill examination as the method, take them for the purpose of employment.Results Compared with the traditional teaching mode, the construction of the exquisite course of greatly leads to the development of the concerned subjects, dissolves the difficulties and professional teaching effectively, improves the quality of teaching, strengthens practice skills of students. For students with them to lay a solid foundation, to meet the recognition and got unit of choose and employ persons, to promote the duty and employment of graduates.%口腔修复学是口腔医学专业的主干课程,构建是高职高专学校培养高素质技能型人才的有效措施.目的:改革传统教学模式、创新教学手段、制定专业实用的人才培养计划,增强在校学生的动手能力、仿真临床培养社会需要的高技能实用型人才.方法:由于是一门专业性、技能性、工艺性和实用性都很强的学科,

  12. Purgeable organic compounds at or near the Idaho Nuclear Technology and Engineering Center, Idaho National Laboratory, Idaho, 2015

    Science.gov (United States)

    Maimer, Neil V.; Bartholomay, Roy C.

    2016-05-25

    During 2015, the U.S. Geological Survey, in cooperation with the U.S. Department of Energy, collected groundwater samples from 31 wells at or near the Idaho Nuclear Technology and Engineering Center (INTEC) at the Idaho National Laboratory for purgeable organic compounds (POCs). The samples were collected and analyzed for the purpose of evaluating whether purge water from wells located inside an areal polygon established downgradient of the INTEC must be treated as a Resource Conservation and Recovery Act listed waste.POC concentrations in water samples from 29 of 31 wells completed in the eastern Snake River Plain aquifer were greater than their detection limit, determined from detection and quantitation calculation software, for at least one to four POCs. Of the 29 wells with concentrations greater than their detection limits, only 20 had concentrations greater than the laboratory reporting limit as calculated with detection and quantitation calculation software. None of the concentrations exceeded any maximum contaminant levels established for public drinking water supplies. Most commonly detected compounds were 1,1,1-trichoroethane, 1,1-dichloroethene, and trichloroethene.

  13. Dental Caries (Tooth Decay)

    Science.gov (United States)

    ... Find Data by Topic > Dental Caries (Tooth Decay) Dental Caries (Tooth Decay) Main Content Dental caries (tooth decay) remains the most prevalent chronic ... important source of information on oral health and dental care in the United States since the early ...

  14. Infant dental care (image)

    Science.gov (United States)

    ... sugar water. As the child grows, establishing proper dental hygiene will promote healthy teeth and gums which are essential to overall good health. Poor dental development, dental disease, and dental trauma can result ...

  15. Final Report to the National Energy Technology Laboratory on FY09-FY13 Cooperative Research with the Consortium for Electric Reliability Technology Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Vittal, Vijay [Arizona State Univ., Mesa, AZ (United States)

    2015-11-04

    The Consortium for Electric Reliability Technology Solutions (CERTS) was formed in 1999 in response to a call from U.S. Congress to restart a federal transmission reliability R&D program to address concerns about the reliability of the U.S. electric power grid. CERTS is a partnership between industry, universities, national laboratories, and government agencies. It researches, develops, and disseminates new methods, tools, and technologies to protect and enhance the reliability of the U.S. electric power system and the efficiency of competitive electricity markets. It is funded by the U.S. Department of Energy’s Office of Electricity Delivery and Energy Reliability (OE). This report provides an overview of PSERC and CERTS, of the overall objectives and scope of the research, a summary of the major research accomplishments, highlights of the work done under the various elements of the NETL cooperative agreement, and brief reports written by the PSERC researchers on their accomplishments, including research results, publications, and software tools.

  16. Technology Evaluations Related to Mercury, Technetium, and Chloride in Treatment of Wastes at the Idaho Nuclear Technology and Engineering Center of the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    C. M. Barnes; D. D. Taylor; S. C. Ashworth; J. B. Bosley; D. R. Haefner

    1999-10-01

    The Idaho High-Level Waste and Facility Disposition Environmental Impact Statement defines alternative for treating and disposing of wastes stored at the Idaho Nuclear Technology and Engineering Center. Development is required for several technologies under consideration for treatment of these wastes. This report contains evaluations of whether specific treatment is needed and if so, by what methods, to remove mercury, technetium, and chlorides in proposed Environmental Impact Statement treatment processes. The evaluations of mercury include a review of regulatory requirements that would apply to mercury wastes in separations processes, an evaluation of the sensitivity of mercury flowrates and concentrations to changes in separations processing schemes and conditions, test results from laboratory-scale experiments of precipitation of mercury by sulfide precipitation agents from the TRUEX carbonate wash effluent, and evaluations of methods to remove mercury from New Waste Calcining Facility liquid and gaseous streams. The evaluation of technetium relates to the need for technetium removal and alternative methods to remove technetium from streams in separations processes. The need for removal of chlorides from New Waste Calcining Facility scrub solution is also evaluated.

  17. Mechanical properties of dental restorative materials: relative contribution of laboratory tests Propriedades mecânicas dos materiais dentários restauradores: contribuição relativa dos ensaios laboratoriais

    Directory of Open Access Journals (Sweden)

    Linda Wang

    2003-09-01

    Full Text Available A wide variety of dental products that are launched on the market becomes the correct selection of these materials a difficult task. Although the mechanical properties do not necessarily represent their actual clinical performance, they are used to guide the effects of changes in their composition or processing on these properties. Also, these tests might help somehow the clinician to choose once comparisons between former formulations and new ones, as well as, with the leading brand, are highlighted by manufactures. This paper presents a review of the most important laboratory tests. In this manner, the knowledge of these tests will provide a critical opinion related to the properties of different dental materials.Uma grande variedade de produtos odontológicos que são lançados no mercado faz da seleção do material uma difícil tarefa. Apesar das propriedades mecânicas não representarem necessariamente o seu real desempenho clínico, os testes são utilizados para orientar os efeitos das alterações das composições do material ou a evolução das suas propriedades. Além disso, estas propriedades podem ajudar o clínico de alguma forma na seleção correta, uma vez que a comparação entre as formulações anteriores e as mais recentes, assim como as líderes de mercado são mais destacadas pelos fabricantes. Este artigo apresenta uma revisão dos testes laboratoriais mais importantes. Desta forma, o conhecimento destes ensaios fornecerá uma opinião crítica relacionada às propriedades dos diferentes materiais dentários.

  18. Dental calculus: Nanocharacterization

    OpenAIRE

    Grga, Đurica; Marjanović, Marina; Hut, Igor; Dželetović, Bojan; Koruga, Đuro

    2012-01-01

    Emerging technologies and new nanoscale information have potential to transform dental practice by improving all aspects of diagnostics and therapy. Nanocharacterization allows understanding of oral diseases at molecular and cellular levels which eventually can increase the success of prevention and treatment. Opto-magnetic spectroscopy (OMS) is a promising new technique based on light-matter interaction which allows insight into the quantum state of matter. Since biomolecules and tissues are...

  19. Clinical applications of laser therapy on the dental practice

    Science.gov (United States)

    Pinheiro, Antonio L. B.

    2004-09-01

    Dental practice consists of a series of laboring procedures which demands the use of several types of equipment and materials. Usually patient"s fears brings additional burden to the Dentists. The use of Lasers for treating and diagnosis in Dentistry is quite new comparing to other medical areas. Initially Laser technology was used as an alternative method for treating dental caries in order to substitute the use of the drill. Lately surgical Lasers have shown themselves very useful for treating several pathologies and began to be used as a powerful tool on the treatment of several conditions affecting the maxillofacial complex and later on, the era of the use of Laser therapy began. The advent of the diode Lasers made possible the introduction of small units at the dental office and Laser therapy was used to improve healing and later included also caries diagnosis. This paper discuss the use of Laser therapy on Restorative Dentistry, Periodondology, Oral and Maxillofacial Surgery, Oral implantology and other. Clinical and laboratorial experience has demonstrated that Laser therapy does improve the healing of both mineralized and soft tissues, reduces pain and inflammation, and also reduces both cost and length of the dental treatment.

  20. Graduate Research Assistant Program for Professional Development at Oak Ridge National Laboratory (ORNL) Global Nuclear Security Technology Division (GNSTD)

    Energy Technology Data Exchange (ETDEWEB)

    Eipeldauer, Mary D [ORNL; Shelander Jr, Bruce R [ORNL

    2012-01-01

    The southeast is a highly suitable environment for establishing a series of nuclear safety, security and safeguards 'professional development' courses. Oak Ridge National Laboratory (ORNL) provides expertise in the research component of these subjects while the Y-12 Nuclear Security Complex handles safeguards/security and safety applications. Several universities (i.e., University of Tennessee, Knoxville (UTK), North Carolina State University, University of Michigan, and Georgia Technology Institute) in the region, which offer nuclear engineering and public policy administration programs, and the Howard Baker Center for Public Policy make this an ideal environment for learning. More recently, the Institute for Nuclear Security (INS) was established between ORNL, Y-12, UTK and Oak Ridge Associate Universities (ORAU), with a focus on five principal areas. These areas include policy, law, and diplomacy; education and training; science and technology; operational and intelligence capability building; and real-world missions and applications. This is a new approach that includes professional development within the graduate research assistant program addressing global needs in nuclear security, safety and safeguards.

  1. Analyzing the Effect of Technology-Based Intervention in Language Laboratory to Improve Listening Skills of First Year Engineering Students

    Directory of Open Access Journals (Sweden)

    Pasupathi Madhumathi

    2013-04-01

    Full Text Available First year students pursuing engineering education face problems with their listening skills. Most of the Indian schools use a bilingual method for teaching subjects from primary school through high school. Nonetheless, students entering university education develop anxiety in listening to classroomlectures in English. This article reports an exploratory study that aimed to find out whether the listening competences of students improved when technology was deployed in language laboratory. It also investigated the opinions of the students about using teacher-suggested websites for acquiring listening skills. The results of the study indicated that the use of technology in a language laboratory for training students in listening competences had reduced the anxiety of the students when listening to English. Further, there was a significant improvement on the part of students in acquiring listening skills through technology-based intervention.Muchos estudiantes de ingeniería de primer año en India tienen problemas con sus habilidades de escucha en inglés; experimentan ansiedad al momento de escuchar conferencias en inglés, pese a que provienen de colegios donde se sigue un modelo bilingüe para enseñar materias desde la primariahasta la secundaria. Con el objetivo de averiguar si las competencias de escucha de los estudiantes mejoran cuando se introduce la tecnología en el laboratorio de idiomas, se realizó un estudio exploratorio en el que se tuvieron en cuenta las opiniones de los estudiantes acerca del uso de sitios web sugeridos por el docente para adquirir habilidades de escucha. Los resultados indican que el uso de la tecnología en el laboratorio de idiomas reduce la ansiedad de los estudiantes al momento de escuchar conferencias en inglés y que progresan significativamente en sus habilidades de escucha.

  2. Large-scale laboratory testing of bedload-monitoring technologies: overview of the StreamLab06 Experiments

    Science.gov (United States)

    Marr, Jeffrey D.G.; Gray, John R.; Davis, Broderick E.; Ellis, Chris; Johnson, Sara; Gray, John R.; Laronne, Jonathan B.; Marr, Jeffrey D.G.

    2010-01-01

    A 3-month-long, large-scale flume experiment involving research and testing of selected conventional and surrogate bedload-monitoring technologies was conducted in the Main Channel at the St. Anthony Falls Laboratory under the auspices of the National Center for Earth-surface Dynamics. These experiments, dubbed StreamLab06, involved 25 researchers and volunteers from academia, government, and the private sector. The research channel was equipped with a sediment-recirculation system and a sediment-flux monitoring system that allowed continuous measurement of sediment flux in the flume and provided a data set by which samplers were evaluated. Selected bedload-measurement technologies were tested under a range of flow and sediment-transport conditions. The experiment was conducted in two phases. The bed material in phase I was well-sorted siliceous sand (0.6-1.8 mm median diameter). A gravel mixture (1-32 mm median diameter) composed the bed material in phase II. Four conventional bedload samplers – a standard Helley-Smith, Elwha, BLH-84, and Toutle River II (TR-2) sampler – were manually deployed as part of both experiment phases. Bedload traps were deployed in study Phase II. Two surrogate bedload samplers – stationarymounted down-looking 600 kHz and 1200 kHz acoustic Doppler current profilers – were deployed in experiment phase II. This paper presents an overview of the experiment including the specific data-collection technologies used and the ambient hydraulic, sediment-transport and environmental conditions measured as part of the experiment. All data collected as part of the StreamLab06 experiments are, or will be available to the research community.

  3. Gold color in dental alloys.

    Science.gov (United States)

    Cameron, T

    1997-01-01

    This article will help the dental laboratory with alloy selection by exploring how the relationship among color, ductility and strength applies to gold and how color can be quantified. Because higher quality materials translate into higher profits, upselling to the dentist and patient is also discussed.

  4. Dental caries

    DEFF Research Database (Denmark)

    Pitts, Nigel B; Zero, Domenick T; Marsh, Phil D

    2017-01-01

    , exposed root surfaces. The balance between pathological and protective factors influences the initiation and progression of caries. This interplay between factors underpins the classification of individuals and groups into caries risk categories, allowing an increasingly tailored approach to care. Dental......Dental caries is a biofilm-mediated, sugar-driven, multifactorial, dynamic disease that results in the phasic demineralization and remineralization of dental hard tissues. Caries can occur throughout life, both in primary and permanent dentitions, and can damage the tooth crown and, in later life...... caries is an unevenly distributed, preventable disease with considerable economic and quality-of-life burdens. The daily use of fluoride toothpaste is seen as the main reason for the overall decline of caries worldwide over recent decades. This Primer aims to provide a global overview of caries...

  5. Electronic Dental Records System Adoption.

    Science.gov (United States)

    Abramovicz-Finkelsztain, Renata; Barsottini, Claudia G N; Marin, Heimar Fatima

    2015-01-01

    The use of Electronic Dental Records (EDRs) and management software has become more frequent, following the increase in prevelance of new technologies and computers in dental offices. The purpose of this study is to identify and evaluate the use of EDRs by the dental community in the São Paulo city area. A quantitative case study was performed using a survey on the phone. A total of 54 offices were contacted and only one declinedparticipation in this study. Only one office did not have a computer. EDRs were used in 28 offices and only four were paperless. The lack of studies in this area suggests the need for more usability and implementation studies on EDRs so that we can improve EDR adoption by the dental community.

  6. Dental Calculus Arrest of Dental Caries

    Science.gov (United States)

    Keyes, Paul H.; Rams, Thomas E.

    2016-01-01

    Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. Materials and methods A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Results Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. Conclusions These observations further document the potential protective effects of dental calculus mineralization against dental caries. PMID:27446993

  7. 基于Flash技术的NMR虚拟实验室%NMR virtual laboratory based on flash technology

    Institute of Scientific and Technical Information of China (English)

    刘志广; 赵冬利; 张永策; 崔桃; 陈珂君

    2013-01-01

    After studying the technology of nuclear magnetic resonance (NMR) spectroscopy and Spectrogram analysis principle, using the Flash CS3.0 animation function and the ActionScript 2.0 language programming platform, utilizing the modular and opening design ideas, nuclear magnetic resonance spectrum analysis virtual laboratory is constructed. The complete NMR virtual laboratory is constructed by virtual instrument, virtual experiments, spectrogram paint and spectra analysis, simulating the whole experiment. The software can automatically and intelligently analysis spectrogram, accurately provide information about the corresponding functional groups in compounds. The molecular structure can be freely assembled by the users.%在对核磁共振波谱分析技术及谱图解析原理深入研究后,利用Flash CS3.0动画制作功能及其提供的ActionScript2.0语言编程平台,运用模块化、开放式设计思想开发核磁共振波谱分析(NMR)虚拟实验室。将虚拟仪器,虚拟实验操作,谱图绘出与谱图解析融为一体,构成完整的 NMR 虚拟实验室,完整的模拟了样品核磁共振波谱分析全过程。自动智能解析谱图,准确提供化合物中相应官能团信息,并由使用者自由组装出分子结构。

  8. Is dental practice science based?

    Science.gov (United States)

    Douglass, C W

    1994-01-01

    This paper explores the thesis that the changing medical needs of dental patients, advances in biomedical research, and the confluence of the financing of medical and dental care will result in closer linkages between the medical and dental care delivery systems during the next century. Five trends have been documented in support of this thesis: the increasing number of elderly and their retention of teeth means there is a greater need for restorative dental care than in previous generations; the elderly have chronic diseases and are taking more medications; younger patients are presenting more frequently with infectious, systemic diseases such as HIV/AIDS. New scientific discoveries are opening new possibilities for patient care, which generate even higher expectations on the part of future consumers of medical and dental services. The health and fitness trend is not a fad; new knowledge regarding diet, nutrition, and exercise is identifying systemic risk factors related to common oral pathologies. Medical and dental educators are paying increased attention to the application of basic sciences to patient care. HMOs are increasing their market share of medical care delivery and expanding their services with preventive care and total patient care, including dental services. Data are provided documenting that dentists see these trends occurring in their private practices. The paper concludes that the application of advances in science and technology to oral health will improve the quality of dentistry. However, only new, effective preventive agents will decrease the cost of care, while improved diagnostics and restorative technologies could increase dental care costs.(ABSTRACT TRUNCATED AT 250 WORDS)

  9. Management of stress and stress-related diseases:Emerging computer-based technologies and the rationale for clinical laboratory assessment

    Directory of Open Access Journals (Sweden)

    Ezekiel Uba Nwose

    2009-11-01

    Full Text Available Background: Over the years, the issue of stress management in mental health has been discussed without reference to the clinical laboratory perspectives. Translational research and the vast array of emerging diagnostic technologies in alternative medical practice are now bridging the gap. While it would be scientific arrogance for the clinical practitioner and scientist to ignore the trend, the new technologies seeking clinical acceptability necessarily require expatiation of the scientific aspects of their products. Aims: This commentary builds on a comparative critical review to further our hypothesis that oxidative stress is the biochemical basis of the emerging computer-based diagnostic technologies. Materials & Method: The available information on Computer Meridian Diagnostics, Neuropattern and Virtual Scanning technologies were critically reviewed. The differences and similarities were articulated. Results: The technologies seem different, but have similarities that have not been articulated before. The seemingly different theories are traceable to Russian scientists and are based upon stress-induced adrenal secretions and the associated effect on glucose metabolism. The therapeutic effects of antioxidant nutrition, exercise or relaxation that are inherent in the technologies are highlighted. Conclusion: This commentary furthers explanation of the alterations in antioxidant activities as a result of biofeedback, oxidative stress and/or physiological effects as the biochemical basis of the technologies. The place for antioxidant indices and whole blood viscosity are also highlighted. This provides a rationale for the evaluation of available clinical diagnostic tests both to validate the technologies and as clinical laboratory correlates in stress management.

  10. Effect of Cooperative Learning and Traditional Methods on Students' Achievements and Identifications of Laboratory Equipments in Science-Technology Laboratory Course

    Science.gov (United States)

    Aydin, Suleyman

    2011-01-01

    Science lessons taught via experiments motivate the students, and make them more insistent on learning science. This study aims to examine the effects of cooperative learning on students' academic achievements and their skills in identifying laboratory equipments. The sample for the study consisted of a total of 43 sophomore students in primary…

  11. Networking as a Strategy for Technology Transfer and Commercialization from R&D Laboratories: Key Lessons from Case Studies in India

    Science.gov (United States)

    Roy, Santanu

    2006-01-01

    Managing R&D and the innovation process is closely linked with technology transfer and the commercialization of research results. This is especially so in the context of publicly-funded R&D laboratory systems in developing countries, such as India's Council of Scientific and Industrial Research (CSIR). Inefficiencies in the transfer…

  12. NREL’s Controllable Grid Interface Saves Time and Resources, Improves Reliability of Renewable Energy Technologies; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-07-01

    The National Renewable Energy Laboratory's (NREL) controllable grid interface (CGI) test system at the National Wind Technology Center (NWTC) is one of two user facilities at NREL capable of testing and analyzing the integration of megawatt-scale renewable energy systems. The CGI specializes in testing of multimegawatt-scale wind and photovoltaic (PV) technologies as well as energy storage devices, transformers, control and protection equipment at medium-voltage levels, allowing the determination of the grid impacts of the tested technology.

  13. Zirconia dental implants: a literature review

    National Research Council Canada - National Science Library

    Özkurt, Zeynep; Kazazoğlu, Ender

    2011-01-01

    Titanium and titanium alloys are widely used for fabrication of dental implants. Because of potential immunologic and possible esthetic compromises with titanium implants, novel implant technologies are being developed...

  14. FACTORS INFLUENCING THE SELECTION OF DENTAL NURSING ...

    African Journals Online (AJOL)

    drclement

    FACTORS INFLUENCING THE SELECTION OF DENTAL NURSING AS A. PROFESSION ... Colleges of Health Technology undergoing external ... questionnaire requested information on age ... individual with good communication skills and ...

  15. Regenerative medicine in dental and oral tissues: Dental pulp mesenchymal stem cell

    Directory of Open Access Journals (Sweden)

    Janti Sudiono

    2017-08-01

    Full Text Available Background. Regenerative medicine is a new therapeutic modality using cell, stem cell and tissue engineering technologies. Purpose. To describe the regenerative capacity of dental pulp mesenchymal stem cell. Review. In dentistry, stem cell and tissue engineering technologies develop incredibly and attract great interest, due to the capacity to facilitate innovation in dental material and regeneration of dental and oral tissues. Mesenchymal stem cells derived from dental pulp, periodontal ligament and dental follicle, can be isolated, cultured and differentiated into various cells, so that can be useful for regeneration of dental, nerves, periodontal and bone tissues. Tissue engineering is a technology in reconstructive biology, which utilizes mechanical, cellular, or biological mediators to facilitate regeneration or reconstruction of a particular tissue. The multipotency, high proliferation rates and accessibility, make dental pulp as an attractive source of mesenchymal stem cells for tissue regeneration. Revitalized dental pulp and continued root development is the focus of regenerative endodontic while biological techniques that can restore lost alveolar bone, periodontal ligament, and root cementum is the focus of regenerative periodontic. Conclucion. Dentin-derived morphogens such as BMP are known to be involved in the regulation of odontogenesis. The multipotency and angiogenic capacity of DPSCs as the regenerative capacity of human dentin / pulp complex indicated that dental pulp may contain progenitors that are responsible for dentin repair. The human periodontal ligament is a viable alternative source for possible primitive precursors to be used in stem cell therapy.

  16. Optically stimulated luminescence (OSL) of dental enamel for retrospective assessment of radiation exposure

    Energy Technology Data Exchange (ETDEWEB)

    Yukihara, E.G. [Department of Physics, Oklahoma State University, Stillwater, OK 74078 (United States)], E-mail: eduardo.yukihara@okstate.edu; Mittani, J.; McKeever, S.W.S. [Department of Physics, Oklahoma State University, Stillwater, OK 74078 (United States); Simon, S.L. [Division of Cancer Epidemiology and Genetics, National Cancer Institute, National Institutes of Health, Bethesda, MD 20892-7238 (United States)

    2007-07-15

    This paper briefly reviews the optically stimulated luminescence (OSL) properties of dental enamel and discusses the potential and challenges of OSL for filling the technology gap in biodosimetry required for medical triage following a radiological/nuclear accident or terrorist event. The OSL technique uses light to stimulate a radiation-induced luminescence signal from materials previously exposed to ionizing radiation. This luminescence originates from radiation-induced defects in insulating crystals and is proportional to the absorbed dose of ionizing radiation. In our research conducted to date, we focused on fundamental investigations of the OSL properties of dental enamel using extracted teeth and tabletop OSL readers. The objective was to obtain information to support the development of the necessary instrumentation for retrospective dosimetry using dental enamel in laboratory, or for in situ and non-invasive accident dosimetry using dental enamel in emergency triage. An OSL signal from human dental enamel was detected using blue, green, or IR stimulation. Blue/green stimulation associated with UV emission detection seems to be the most appropriate combination in the sense that there is no signal from un-irradiated samples and the shape of the OSL decay is clear. Improvements in the minimum detection level were achieved by incorporating an ellipsoidal mirror in the OSL system to maximize light collection. Other possibilities to improve the sensitivity and research steps necessary to establish the feasibility of the technique for retrospective assessment of radiation exposure are also discussed.

  17. Diabetes: Dental Tips

    Science.gov (United States)

    ... Diabetes and Oral Health > Diabetes: Dental Tips Diabetes: Dental Tips Main Content Diabetes can cause serious problems ... FOIA Web Policies Privacy Policy National Institute of Dental and Craniofacial Research National Institutes of Health Bethesda, ...

  18. Dental Exam for Children

    Science.gov (United States)

    ... they're most treatable. When to have a dental exam Various factors might determine how frequently your ... wisdom teeth (third molars) at the appropriate age. Dental X-ray A dental X-ray (radiograph) allows ...

  19. Dental Care in Pregnancy

    Science.gov (United States)

    Share with Women Dental Care in Pregnancy Why is dental care in pregnancy important? During pregnancy, you are more likely to have problems ... There are 2 major reasons women can have dental problems during pregnancy: Pregnancy gingivitis— During pregnancy, changes ...

  20. American Dental Education Association

    Science.gov (United States)

    ... Interest Groups ADEA Governance Documents and Publications ADEA Dental Faculty Code of Conduct ADEA Bylaws ADEAGies Foundation ... Benefits for Faculty ADEA Member Benefits for Allied Dental Programs ADEA Member Benefits for Dental Schools ADEA ...

  1. Dental Issues & Down Syndrome

    Science.gov (United States)

    ... Associated Conditions » Dental Issues & Down Syndrome Dental Issues & Down Syndrome Dental care is important for everybody, but people ... is Different About the Teeth of People With Down Syndrome? Delayed Eruption The teeth of people with Down ...

  2. Laboratory Construction and Management Based on Virtual Cloud Technology%基于虚拟云技术的实验室建设和管理

    Institute of Scientific and Technical Information of China (English)

    曾阳艳

    2015-01-01

    通过对虚拟云技术在实验室的应用研究,构建云环境下虚拟实验室架构,以提供多样的、动态的实验环境;通过桌面虚拟化技术和服务器虚拟化技术对资源访问和管理,从根本上改变了计算机实验室建设和管理方式,解决了实验室建设成本高、管理维护效率低等问题,使计算机实验室资源更好地为实验教学和科研服务.%Through the research on the virtual cloud technology application in the laboratory, a cloud environment virtual laboratory of computer architecture is build to provide a diverse and dynamic experimental environment;Resource access and management are accomplished through desktop virtualization and server virtualization technology, which change the approach of laboratory con?struction and management drastically.The problems both of high cost of laboratory construction and of low efficiency of manage?ment and maintenance are solved,which allows the resources of computer laboratory to provide better services for experiment teach?ing and scientific research.

  3. Product and market study for Los Alamos National Laboratory. Building resources for technology commercialization: The SciBus Analytical, Inc. paradigm

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The study project was undertaken to investigate how entrepreneurial small businesses with technology licenses can develop product and market strategies sufficiently persuasive to attract resources and exploit commercialization opportunities. The study attempts to answer two primary questions: (1) What key business development strategies are likely to make technology transfers successful, and (2) How should the plan best be presented in order to attract resources (e.g., personnel, funding, channels of distribution)? In the opinion of the investigator, Calidex Corporation, if the business strategies later prove to be successful, then the plan model has relevance for any technology licensee attempting to accumulate resources and bridge from technology resident in government laboratories to the commercial marketplace. The study utilized SciBus Analytical, Inc. (SciBus), a Los Alamos National Laboratory CRADA participant, as the paradigm small business technology licensee. The investigator concluded that the optimum value of the study lay in the preparation of an actual business development plan for SciBus that might then have, hopefully, broader relevance and merit for other private sector technology transfer licensees working with various Government agencies.

  4. Dental Implants.

    Science.gov (United States)

    Griggs, Jason A

    2017-10-01

    Systematic reviews of literature over the period between 2008 and 2017 are discussed regarding clinical evidence for the factors affecting survival and failure of dental implants. The factors addressed include publication bias, tooth location, insertion torque, collar design, implant-abutment connection design, implant length, implant width, bone augmentation, platform switching, surface roughness, implant coatings, and the use of ceramic materials in the implant body and abutment. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. 人牙髓细胞共混物三维生物打印技术%Three dimensional bioprinting technology of human dental pulp cells mixtures

    Institute of Scientific and Technical Information of China (English)

    薛世华; 吕培军; 王勇; 赵雨; 张婷

    2013-01-01

    To explore the three dimensioned(3D)bioprinting technology, using human dental pulp cells (hDPCs) mixture as bioink and to lay initial foundations for the application of the 3D bioprinting technology in tooth regeneration. Methods; Imageware 11,0 computer software was used to aid the design of the 3D biological printing blueprint. Sodium alginate-gelatin hydrosol was prepared and mixed with in vitro isolated hDPCs. The mixture contained 20 g/L sodium alginate and 80 g/L gelatin with cell density of 1 × 106/mL. The bioprinting of hDPCs mixture was carried out according to certain parameters; the 3D constructs obtained by printing were examined; the viability of hDPCs after printing by staining the constructs with calcein-AM and propidium iodide dye and scanning of laser scanning con-focal microscope was evaluated. The in vitro constructs obtained by the bioprinting were cultured, and the proliferation of hDPCs in the constructs detected. Results; By using Imageware 11.0 software, the 3D constructs with the grid structure composed of the accumulation of staggered cylindrical microfilament layers were obtained. According to certain parameters, the hDPCs-sodium alginate-gelatin blends were printed by the 3D bioprinting technology. The self-defined shape and dimension of 3D constructs with the cell survival rate of 87% ±2% were constructed. The hDPCs could proliferate in 3D constructs after printing. Conclusion; In this study, the 3D bioprinting of hDPCs mixtures was realized, thus laying initial foundations for the application of the 3D bioprinting technology in tooth regeneration.%目的:对人牙髓细胞(human dental pulp cells,hDPCs)共混物三维生物打印技术进行初步的探索,为三维生物打印技术应用于牙再生奠定初步基础.方法:用Imageware 11.0软件设计三维生物打印蓝图;制备海藻酸钠-明胶水溶胶,与体外分离、培养的hDPCs共混,共混物中hDPCs的密度为1×106个/mL,海藻酸钠和

  6. Dental caries.

    Science.gov (United States)

    Pitts, Nigel B; Zero, Domenick T; Marsh, Phil D; Ekstrand, Kim; Weintraub, Jane A; Ramos-Gomez, Francisco; Tagami, Junji; Twetman, Svante; Tsakos, Georgios; Ismail, Amid

    2017-05-25

    Dental caries is a biofilm-mediated, sugar-driven, multifactorial, dynamic disease that results in the phasic demineralization and remineralization of dental hard tissues. Caries can occur throughout life, both in primary and permanent dentitions, and can damage the tooth crown and, in later life, exposed root surfaces. The balance between pathological and protective factors influences the initiation and progression of caries. This interplay between factors underpins the classification of individuals and groups into caries risk categories, allowing an increasingly tailored approach to care. Dental caries is an unevenly distributed, preventable disease with considerable economic and quality-of-life burdens. The daily use of fluoride toothpaste is seen as the main reason for the overall decline of caries worldwide over recent decades. This Primer aims to provide a global overview of caries, acknowledging the historical era dominated by restoration of tooth decay by surgical means, but focuses on current, progressive and more holistic long-term, patient-centred, tooth-preserving preventive care.

  7. Danish dental education:

    DEFF Research Database (Denmark)

    Moore, Rod

    1985-01-01

    The effects of Danish cultural traditions on dental education in Denmark are described, as well as the system's current structure and developing issues. Some Danish ideas for future exports of dental education programs and dental personnel are also discussed.......The effects of Danish cultural traditions on dental education in Denmark are described, as well as the system's current structure and developing issues. Some Danish ideas for future exports of dental education programs and dental personnel are also discussed....

  8. Danish dental education:

    DEFF Research Database (Denmark)

    Moore, Rod

    1985-01-01

    The effects of Danish cultural traditions on dental education in Denmark are described, as well as the system's current structure and developing issues. Some Danish ideas for future exports of dental education programs and dental personnel are also discussed.......The effects of Danish cultural traditions on dental education in Denmark are described, as well as the system's current structure and developing issues. Some Danish ideas for future exports of dental education programs and dental personnel are also discussed....

  9. Development of health inter-professional telemedicine practice through simulation scenario training with students of physiotherapy-, occupational therapy-, medical laboratory technology-, and nursing education

    DEFF Research Database (Denmark)

    Nortvig, Anne-Mette; Vestergaard*, Kitt

    2014-01-01

    must take place in an inter-professional context. Aims: The purpose of the project was •to develop practice oriented competences related to telemedicine in an inter-professional and a cross-sectoral context among health professional students of physiotherapy-, occupational therapy-, medical laboratory...... and motivation. Results: Evaluations and follow-up research showed that students developed competences equivalent to novice level through simulation training (3). The project gave rise to wide project on Occupational Therapy education and medical laboratory technology education too. Follow-up research concludes...

  10. Highlighting High Performance: National Renewable Energy Laboratory's Thermal Test Facility, Golden, Colorado. Office of Building Technology State and Community Programs (BTS) Brochure

    Energy Technology Data Exchange (ETDEWEB)

    Burgert, S.

    2002-10-21

    The National Renewable Energy Laboratory's Thermal Test Facility in Golden, Colorado, was designed using a whole-building approach--looking at the way the building's systems worked together most efficiently. Researchers monitor the performance of the 11,000-square-foot building, which boasts an energy cost savings of 63% for heating, cooling, and lighting. The basic plan of the building can be adapted to many needs, including retail and warehouse space. The Thermal Test Facility contains office and laboratory space; research focuses on the development of energy-efficiency and renewable energy technologies that are cost-effective and environmentally friendly.

  11. Survey of Laboratories and Implementation of the Federal Defense Laboratory Diversification Program. Annex A. Department of the Army Domestic Technology Transfer

    Science.gov (United States)

    1993-11-01

    benefits provided by ARL’s substantial investment in marketing tools and displays which have been developed for use by the DTI" program as well as other ARL...conference. Other marketing tools range from tri-fold single page hand outs, up to 20 to 30 page full color brochures. The ARL DTT program is...this year several new marketing tools have been developed: a) An ARL DTr handout which provides a brief description of ARL, the DTT program technology

  12. Feline dental radiography and radiology: A primer.

    Science.gov (United States)

    Niemiec, Brook A

    2014-11-01

    Information crucial to the diagnosis and treatment of feline oral diseases can be ascertained using dental radiography and the inclusion of this technology has been shown to be the best way to improve a dental practice. Becoming familar with the techniques required for dental radiology and radiography can, therefore, be greatly beneficial. Novices to dental radiography may need some time to adjust and become comfortable with the techniques. If using dental radiographic film, the generally recommended 'E' or 'F' speeds may be frustrating at first, due to their more specific exposure and image development requirements. Although interpreting dental radiographs is similar to interpreting a standard bony radiograph, there are pathologic states that are unique to the oral cavity and several normal anatomic structures that may mimic pathologic changes. Determining which teeth have been imaged also requires a firm knowledge of oral anatomy as well as the architecture of dental films/digital systems. This article draws on a range of dental radiography and radiology resources, and the benefit of the author's own experience, to review the basics of taking and interpreting intraoral dental radiographs. A simplified method for positioning the tubehead is explained and classic examples of some common oral pathologies are provided. © ISFM and AAFP 2014.

  13. American Dental Hygienists' Association

    Science.gov (United States)

    ... Resources Student Resources National Exam Student Advisor Resources Dental Hygiene Programs Scholarships and Grants Research Center Transforming Dental Hygiene Education Advocacy Practice Issues Direct Access Scope ...

  14. The relevance of behavioural sciences in dental practice

    DEFF Research Database (Denmark)

    Schou, L

    2000-01-01

    or the technical skills of dental professionals, but also on patients, their attitudes and behaviour and the interaction between dental professionals and patients. It is well known that the success of dental treatments (for example, periodontal, orthodontic or implants) depends on the patient's behaviour, which......The aim of this paper is to illustrate how knowledge from behavioural sciences is necessary and relevant in creating a successful dental practice, benefitting patients and dental professionals. There are many ways to create a successful dental practice, the products of which are the various...... treatments performed by dentists or dental hygienists for their patients. Advanced technologies and methods are constantly improving these treatments and thus the technical and managerial aspects of dentistry. However, the success of dental practice is not only dependent on the technique applied...

  15. The relevance of behavioural sciences in dental practice

    DEFF Research Database (Denmark)

    Schou, L

    2000-01-01

    or the technical skills of dental professionals, but also on patients, their attitudes and behaviour and the interaction between dental professionals and patients. It is well known that the success of dental treatments (for example, periodontal, orthodontic or implants) depends on the patient's behaviour, which......The aim of this paper is to illustrate how knowledge from behavioural sciences is necessary and relevant in creating a successful dental practice, benefitting patients and dental professionals. There are many ways to create a successful dental practice, the products of which are the various...... treatments performed by dentists or dental hygienists for their patients. Advanced technologies and methods are constantly improving these treatments and thus the technical and managerial aspects of dentistry. However, the success of dental practice is not only dependent on the technique applied...

  16. Dental Fear among Medical and Dental Undergraduates

    Directory of Open Access Journals (Sweden)

    H. Hakim

    2014-01-01

    Full Text Available Objective. To assess the prevalence and level of dental fear among health related undergraduates and to identify factors causing such fear using Kleinknecht’s Dental Fear Survey (DFS questionnaire. Methods. Kleinknecht’s DFS questionnaire was used to assess dental fear and anxiety among the entire enrollment of the medical and dental undergraduates’ of the University of Malaya. Results. Overall response rate was 82.2%. Dental students reported higher prevalence of dental fear (96.0% versus 90.4%. However, most of the fear encountered among dental students was in the low fear category as compared to their medical counterpart (69.2 versus 51.2%. Significantly more medical students cancelled dental appointment due to fear compared to dental students (P=0.004. “Heart beats faster” and “muscle being tensed” were the top two physiological responses experienced by the respondents. “Drill” and “anesthetic needle” were the most fear provoking objects among respondents of both faculties. Conclusion. Dental fear and anxiety are a common problem encountered among medical and dental undergraduates who represent future health care professionals. Also, high level of dental fear and anxiety leads to the avoidance of the dental services.

  17. Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review

    Directory of Open Access Journals (Sweden)

    Wellington Luiz de Oliveira ROSA

    Full Text Available ABSTRACT Objective A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. Material and Methods This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma statement. Searches were performed until December 2014 in six databases: MedLine (PubMed, Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States. Results A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers, synthetic resins (681 papers, dental cements (440 papers, dental alloys (392 papers and dental adhesives (361 papers. The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents, followed by dental implants (8 patents and composite resins (7 patents. Conclusions Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development

  18. Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review

    Science.gov (United States)

    ROSA, Wellington Luiz de Oliveira; SILVA, Tiago Machado; LIMA, Giana da Silveira; SILVA, Adriana Fernandes; PIVA, Evandro

    2016-01-01

    ABSTRACT Objective A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. Material and Methods This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). Results A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Conclusions Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in

  19. Dental students--dental advocates.

    Science.gov (United States)

    Bensch, Brittany

    2010-01-01

    Student advocacy and involvement in the political process is built into the structure of the American Student Dental Association (ASDA), especially in its Legislative Grassroots Network and an internal communication network among students to ensure political awareness. Students are concerned with such issues as a universally accepted, non-patient-based licensure process, mid-level providers, loan availability and tax deductibility, financial support for schools, and service early in one's professional career (giving forward rather than giving back). Through collaboration with the American Dental Education Association and with many state associations, students participate in lobbying, awareness campaigns, and behind the scenes as legislative aids. Although students share the same love for the profession that animates established practitioners, they are perceived by legislators as being different. Students are involved in the legislative process because it represents their future.

  20. Feasibility of Key Star Wars Technology at Center of Debate over Information a Cal. Laboratory Gave Government.

    Science.gov (United States)

    McDonald, Kim

    1988-01-01

    The question of whether a university is responsible for the technical accuracy of information released by senior administrators of a laboratory it is charged with overseeing is examined in the case involving a dispute at the Lawrence Livermore National Laboratory that is overseen by the University of California. (MLW)

  1. Performance of Zirconia for Dental Healthcare

    Directory of Open Access Journals (Sweden)

    Ralf J. Kohal

    2010-02-01

    Full Text Available The positive results of the performance of zirconia for orthopedics devices have led the dental community to explore possible esthetical and mechanical outcomes using this material. However, questions regarding long-term results have opened strong and controversial discussions regarding the utilization of zirconia as a substitute for alloys for restorations and implants. This narrative review presents the current knowledge on zirconia utilized for dental restorations, oral implant components, and zirconia oral implants, and also addresses laboratory tests and developments, clinical performance, and possible future trends of this material for dental healthcare.

  2. Improved communication with the laboratory for the fabrication of labial veneers.

    Science.gov (United States)

    Schwartzman, Aaron; Zweig, Alan E

    2015-04-01

    Advances in dental materials and adhesive technologies have changed the way we practice dentistry. Consequently, restorative dentistry has seen the adoption and almost exponential increase in usage of materials like zirconia and lithium disilicate. Unlike the incidence of ceramic failure in the past, these newer materials are paving the road to better looking dentistry. This paper focuses on lithium disilicate and predominantly glassy ceramics, as well as improving communication with the laboratory.

  3. Evaluation of linear dimensional stability of various combinations of dental stone and plaster.

    Science.gov (United States)

    Adegbulugbe, I C; Oderinu, O H; Shaba, O P; Oremosu, O A

    2011-01-01

    It has been observed that due to the cheaper cost of dental plaster compared to dental stone, casts on which most of the dental prostheses and appliances were being fabricated in various laboratories were often mixtures of dental stone and dental plaster in order to reduce production cost. To evaluate the dimensional stability of various combinations of Dental Stone and Dental Plaster mixtures used to make dental casts. Alginate impressions of a master model of truncated metal cones were made and casts were produced by pouring with various combinations of dental stone and dental plaster mixtures. The linear dimensional differences between the inter-abutment distances on the casts were measured with an electronic caliper. One sample t-test and percentage differences were calculated. Dimensional variations for the distances measured using either 50% dental stone or 25% dental stone with plaster were statistically significant (p d" 0.05). Mixture of 75% dental stone and 25% dental plaster produced casts with no statistically significant dimensional variation from the master model (p e" 0.05). A mixture of 75% dental stone and 25% dental plaster could be used for procedures not requiring very accurate replica like mounting of teeth for dental training and for study models.

  4. Oak Ridge National Laboratory Support of Non-light Water Reactor Technologies: Capabilities Assessment for NRC Near-term Implementation Action Plans for Non-light Water Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Belles, Randy [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jain, Prashant K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Powers, Jeffrey J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-04-01

    The Oak Ridge National Laboratory (ORNL) has a rich history of support for light water reactor (LWR) and non-LWR technologies. The ORNL history involves operation of 13 reactors at ORNL including the graphite reactor dating back to World War II, two aqueous homogeneous reactors, two molten salt reactors (MSRs), a fast-burst health physics reactor, and seven LWRs. Operation of the High Flux Isotope Reactor (HFIR) has been ongoing since 1965. Expertise exists amongst the ORNL staff to provide non-LWR training; support evaluation of non-LWR licensing and safety issues; perform modeling and simulation using advanced computational tools; run laboratory experiments using equipment such as the liquid salt component test facility; and perform in-depth fuel performance and thermal-hydraulic technology reviews using a vast suite of computer codes and tools. Summaries of this expertise are included in this paper.

  5. A review of radio frequency identification technology for the anatomic pathology or biorepository laboratory: Much promise, some progress, and more work needed

    Directory of Open Access Journals (Sweden)

    Jerry J Lou

    2011-01-01

    Full Text Available Patient safety initiatives throughout the anatomic laboratory and in biorepository laboratories have mandated increasing emphasis on the need for accurately identifying and tracking biospecimen assets throughout their production lifecycle and for archiving/retrieval purposes. However, increasing production volume along with complex workflow characteristics, reliance on manual production processes, and required asset movement to disparate destinations throughout asset lifecycles continue to challenge laboratory efforts. Radio Frequency Identification (RFID technology, use of radio waves to communicate data between electronic tags attached to objects and a reader, shows significant potential to facilitate and overcome these hurdles. Advantages over traditional barcode labeling include readability without direct line-of-sight alignment to the reader, ability to read multiple tags simultaneously, higher data storage capacity, faster data transmission rate, and capacity to perform multiple read-writes of data to the tag. Most importantly, use of radio waves decreases the need to manually scan each asset, and at each step, identification or tracking event is needed. Temperature monitoring by on-board sensors and three-dimensional position tracking are additional potential benefits of using RFID technology. To date, barriers to implementation of RFID systems in the anatomic laboratory include increased associated costs of tags and readers, system software, data security concerns, lack of specific data standards for stored information, and potential for technological obsolescence during decades of specimen storage. Novel RFID production techniques and increased production capacity are projected to lower costs of some tags to a few cents each. Potentially, information security concerns can be addressed by techniques such as shielding, data encryption, and tag pseudonyms. Commitment by stakeholder groups to develop RFID tag data standards for anatomic

  6. A review of radio frequency identification technology for the anatomic pathology or biorepository laboratory: Much promise, some progress, and more work needed.

    Science.gov (United States)

    Lou, Jerry J; Andrechak, Gary; Riben, Michael; Yong, William H

    2011-01-01

    Patient safety initiatives throughout the anatomic laboratory and in biorepository laboratories have mandated increasing emphasis on the need for accurately identifying and tracking biospecimen assets throughout their production lifecycle and for archiving/retrieval purposes. However, increasing production volume along with complex workflow characteristics, reliance on manual production processes, and required asset movement to disparate destinations throughout asset lifecycles continue to challenge laboratory efforts. Radio Frequency Identification (RFID) technology, use of radio waves to communicate data between electronic tags attached to objects and a reader, shows significant potential to facilitate and overcome these hurdles. Advantages over traditional barcode labeling include readability without direct line-of-sight alignment to the reader, ability to read multiple tags simultaneously, higher data storage capacity, faster data transmission rate, and capacity to perform multiple read-writes of data to the tag. Most importantly, use of radio waves decreases the need to manually scan each asset, and at each step, identification or tracking event is needed. Temperature monitoring by on-board sensors and three-dimensional position tracking are additional potential benefits of using RFID technology. To date, barriers to implementation of RFID systems in the anatomic laboratory include increased associated costs of tags and readers, system software, data security concerns, lack of specific data standards for stored information, and potential for technological obsolescence during decades of specimen storage. Novel RFID production techniques and increased production capacity are projected to lower costs of some tags to a few cents each. Potentially, information security concerns can be addressed by techniques such as shielding, data encryption, and tag pseudonyms. Commitment by stakeholder groups to develop RFID tag data standards for anatomic pathology and

  7. Mechanical Components and Tribology Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory evaluates fundamental friction, wear, and lubrication technologies for improved, robust, and power-dense vehicle transmissions. The facility explores...

  8. Perceived sources of stress within a dental educational environment.

    Science.gov (United States)

    Al-Omari, Wael Mousa

    2005-11-15

    The aim of this study was to identify the perceived sources of stress among dental students, dental hygiene students, and dental technology students enrolled at Jordan University of Science and Technology (JUST). The modified dental environment stress questionnaire was administered to 183 students. The perceived stressors varied between major and year. Dental students gave high scores for examinations, reduced holidays, inadequate time for relaxation, fear of failure, completing clinical requirements, and differences in opinion between staff. Dental hygiene students gave the highest scores for uncertainty about the field of study as future career, examinations, inadequate clinical training and supervision, inadequate relaxation, and discrimination between students. Dental technology students also gave high scores for uncertainty about future career, examinations, approachability of the staff, inadequate relaxation, and completing requirements. Females are more stressed than males with regard to personal factors. Dental technology and/or dental hygiene students have significantly higher scores than dental students in 12 items. Students who reported their first choice of study was not their current field of study showed more stress concerning their future careers. The high scores reported for some stressors among students emphasize the need to address student's concerns.

  9. 分析游离端缺失修复中种植牙技术的应用效果%Analysis the application effect of dental implants in distal-extension absence repair technology

    Institute of Scientific and Technical Information of China (English)

    赵林琪

    2015-01-01

    Objective To analyze the clinical effect of dental implant technology in the absence of free end repair. Methods From 2012 2 to 2015 8, 56 patients with free end deletion were randomly divided into study group and control group, each of 28 cases. The patients in the control group were treated with denture restoration, the study group were treated with dental implant technology, compared with the effect of the two groups of patients. Results In the study group, the dental occlusion rate was 89.28%, the success rate was 92.85%, the success rate was 71.42%in the contrast group, the success rate was 78.57%, the difference was statistically significant(P<0.05). Conclusion The use of dental implant technology in the treatment of patients with free end loss, to a large extent, improve the success rate, and achieved good results.%目的:对种植牙技术在游离端缺失修复中的疗效进行分析。方法选取2012年2月~2015年5月我院收治的游离端缺失患者56例,将其随机分为研究组和对比组,各28例。对比组患者给予义齿修复,研究组患者给予种植牙技术修复,比较两组患者的修复效果。结果研究组患者牙齿咬合率为89.28%、成功率为92.85%,对比组患者牙齿咬合率为71.42%、成功率为78.57%,差异有统计学意义(P<0.05)。结论采用种植牙技术对游离端缺失患者进行修复治疗,能够在很大程度上提高种植成功率,取得良好的修复效果。

  10. Dental erozyon

    NARCIS (Netherlands)

    Özen, B.; Yönel, N.; Çetiner, S.

    2015-01-01

    Dental erozyon, plak içermeyen diş yüzeyleri üzerinde içsel ve dışsal asitlerin veya şelatların etkileriyle oluşan kimyasal bir aşınmadır. İçsel ve/veya dışsal kaynaklar nedensel faktörler olarak tanımlanırken tükürük ve pelikıl gibi biyolojik faktörler, yeme ve içme alışkanlıkları ve ağız hijyeni

  11. Protective Systems Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory is a 40 by 28 by 9 foot facility that is equipped with tools for the development of various items of control technology related to the transmission...

  12. Los Alamos National Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Lab has a proud history and heritage of almost 70 years of science and innovation. The people at the Laboratory work on advanced technologies to provide the best...

  13. Dental Care for Medicaid and CHIP Enrollees

    Science.gov (United States)

    ... Close Home > Medicaid > Benefits > Dental Care Dental Care Dental Care Dental Care for Medicaid and CHIP Enrollees Dental health ... services and opportunities and challenges to obtaining care. Dental Benefits for Children in Medicaid Medicaid covers dental ...

  14. Image post-processing in dental practice.

    Science.gov (United States)

    Gormez, Ozlem; Yilmaz, Hasan Huseyin

    2009-10-01

    Image post-processing of dental digital radiographs, a function which used commonly in dental practice is presented in this article. Digital radiography has been available in dentistry for more than 25 years and its use by dental practitioners is steadily increasing. Digital acquisition of radiographs enables computer-based image post-processing to enhance image quality and increase the accuracy of interpretation. Image post-processing applications can easily be practiced in dental office by a computer and image processing programs. In this article, image post-processing operations such as image restoration, image enhancement, image analysis, image synthesis, and image compression, and their diagnostic efficacy is described. In addition this article provides general dental practitioners with a broad overview of the benefits of the different image post-processing operations to help them understand the role of that the technology can play in their practices.

  15. Los Alamos National Laboratory: Request for Information (RFI) – Call for Commercialization Partners on behalf of the Department of Energy’s Fuel Cell Technologies Office (FCTO) L’Innovator Pilot Program

    Energy Technology Data Exchange (ETDEWEB)

    Barber, Laura Jeaneen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-19

    The purpose of the L’Innovator is to assemble unique, state-of-the-art IP bundles developed at the national labs that aggregate synergistic technologies in furtherance of the emerging hydrogen and fuel cell market. The first L’Innovator IP bundle consists of Oxygen Reduction Reaction (ORR) Catalyst technology developed at Brookhaven National Laboratory (BNL), combined with Membrane Electrode Assembly (MEA) technology developed at Los Alamos National Laboratory (LANL).

  16. Educational area for learning of optics and technologies: union of open laboratories of ideas, methods and practices (OLIMP)

    Science.gov (United States)

    Ivashchenko, Maksim; Bodrov, Kirill; Tolstoba, Nadezhda

    2016-09-01

    The paper deals with the concept of creating the union of Open Laboratories of Ideas, Methods and Practices (OLIMP). It describes the structure designed to simplify the relationship, such as business incubators, start-up accelerators, small innovative enterprises, fabrication laboratories and student centers. We consider their advantages and disadvantages for the specific audience of students and enthusiasts who do not have funding for their own projects. The experience of interaction between the Open Laboratories of Ideas, Methods and Practices and the Student Research Laboratory for Optical Engineering shows the relative impact of structures on each other and the value of using such interaction in the learning process. The paper also addresses issues such as: the motivation of students, enthusiasm for the direction the lab participants identify and maintain the initiatives, profiling in the design, scientific, commercial, social sphere.

  17. Communications and Information Sharing (CIS) Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — TheCommunications and Information Sharing (CIS) Laboratory is a Public Safety interoperable communications technology laboratory with analog and digital radios, and...

  18. Child Indicators: Dental Health.

    Science.gov (United States)

    Lewit, Eugene M.; Kerrebrock, Nancy

    1998-01-01

    Reviews measures of dental health in children and the evidence on child dental health. Although children's dental health has improved over the past two decades, many poor children do not receive necessary dental health services, and reasons for this failure are summarized. (SLD)

  19. Weaker dental enamel explains dental decay.

    Science.gov (United States)

    Vieira, Alexandre R; Gibson, Carolyn W; Deeley, Kathleen; Xue, Hui; Li, Yong

    2015-01-01

    Dental caries continues to be the most prevalent bacteria-mediated non-contagious disease of humankind. Dental professionals assert the disease can be explained by poor oral hygiene and a diet rich in sugars but this does not account for caries free individuals exposed to the same risk factors. In order to test the hypothesis that amount of amelogenin during enamel development can influence caries susceptibility, we generated multiple strains of mice with varying levels of available amelogenin during dental development. Mechanical tests showed that dental enamel developed with less amelogenin is "weaker" while the dental enamel of animals over-expressing amelogenin appears to be more resistant to acid dissolution.

  20. Scaling up Xpert MTB/RIF technology: the costs of laboratory- vs. clinic-based roll-out in South Africa

    Science.gov (United States)

    Schnippel, Kathryn; Meyer-Rath, Gesine; Long, Lawrence; MacLeod, William; Sanne, Ian; Stevens, Wendy S; Rosen, Sydney

    2012-01-01

    Objective The World Health Organization recommends using Xpert MTB/RIF for diagnosis of pulmonary tuberculosis (PTB), but there is little evidence on the optimal placement of Xpert instruments in public health systems. We used recent South African data to compare the cost of placing Xpert at points of TB treatment (all primary clinics and hospitals) with the cost of placement at sub-district laboratories. Methods We estimated Xpert’s cost/test in a primary clinic pilot and in the pilot phase of the national Xpert roll-out to smear microscopy laboratories; the expected future volumes for each of 223 laboratories or 3799 points of treatment; the number and cost of Xpert instruments required and the national cost of using Xpert for PTB diagnosis for each placement scenario in 2014. Results In 2014, South Africa will test 2.6 million TB suspects. Laboratory placement requires 274 Xpert instruments, while point-of-treatment placement requires 4020 instruments. With an Xpert cartridge price of $14.00, the cost/test is $26.54 for laboratory placement and $38.91 for point-of-treatment placement. Low test volumes and a high number of sites are the major contributors to higher point-of-treatment costs. National placement of Xpert at laboratories would cost $71 million/year; point-of-treatment placement would cost $107 million/year, 51% more. Conclusion Placing Xpert technology at points of treatment is substantially more expensive than placing the instruments in smear microscopy laboratories. The incremental benefits of point-of-treatment placement, in terms of better patient outcomes, will have to be equally substantial to justify the additional cost to the national health budget. PMID:22686606

  1. Scaling up Xpert MTB/RIF technology: the costs of laboratory- vs. clinic-based roll-out in South Africa.

    Science.gov (United States)

    Schnippel, Kathryn; Meyer-Rath, Gesine; Long, Lawrence; MacLeod, William; Sanne, Ian; Stevens, Wendy S; Rosen, Sydney

    2012-09-01

    The World Health Organization recommends using Xpert MTB/RIF for diagnosis of pulmonary tuberculosis (PTB), but there is little evidence on the optimal placement of Xpert instruments in public health systems. We used recent South African data to compare the cost of placing Xpert at points of TB treatment (all primary clinics and hospitals) with the cost of placement at sub-district laboratories. We estimated Xpert's cost/test in a primary clinic pilot and in the pilot phase of the national Xpert roll-out to smear microscopy laboratories; the expected future volumes for each of 223 laboratories or 3799 points of treatment; the number and cost of Xpert instruments required and the national cost of using Xpert for PTB diagnosis for each placement scenario in 2014. In 2014, South Africa will test 2.6 million TB suspects. Laboratory placement requires 274 Xpert instruments, while point-of-treatment placement requires 4020 instruments. With an Xpert cartridge price of $14.00, the cost/test is $26.54 for laboratory placement and $38.91 for point-of-treatment placement. Low test volumes and a high number of sites are the major contributors to higher point-of-treatment costs. National placement of Xpert at laboratories would cost $71 million/year; point-of-treatment placement would cost $107 million/year, 51% more. Placing Xpert technology at points of treatment is substantially more expensive than placing the instruments in smear microscopy laboratories. The incremental benefits of point-of-treatment placement, in terms of better patient outcomes, will have to be equally substantial to justify the additional cost to the national health budget. © 2012 Blackwell Publishing Ltd.

  2. Practical development of laboratory of biologics technology of the Palladin Institute of Biochemistry of NAS of Ukraine for the period 1991-2010

    Directory of Open Access Journals (Sweden)

    G. G. Lugovska

    2015-10-01

    Full Text Available The paper presents the results of inventive activity of the Laboratory of Biologics Technology of the Palladin Institute of Biochemistry, NAS of Ukraine, under the leadership of Z.M.Datsenko, Cand.Sc. (Biol., during 1991-2010. The laboratory researchers have developed new technologies for production of medicines of lipid-protein nature, which are based on endogenous complexes of biologically active substances included in the composition of biomembranes of different origin. The researchers have created new technologies for drug PANTOCRINE (for injections and oral administration from antlers of deers and horns of farm animals that have significantly higher biological activity compared with the commercial drug. They have also created new biologically active drugs from antlers with a specific action: HIPPOCAMP, reducing blood pressure in various forms of hypertension, and PANTERON – biological regulator of synthesis of steroid hormones. Further the researchers have developed technologies for obtaining biologically active complexes of various specific action from marine organisms (calamari, clams mussels, shellfish: CALMOFIL and MOLUFIL, therapeutic agents for replacement therapy of surfactant system of the lungs; FILOMEK, the agent for prophylaxis and treatment of a human reproductive system disorders; MOLUSTERON, the glicolipopeptide complex, three individual physiologically active compositions being differentially obtained from the latter: lipopeptide composition – for treatment of hypertension, nucleopeptide one – for treatment of hormonal disorders, and phospholipid – for treatment of lung diseases under the surfactant shortage.

  3. Laboratory Experiments on the Effects of Blade Strike from Hydrokinetic Energy Technologies on Larval and Juvenile Freshwater Fishes

    Energy Technology Data Exchange (ETDEWEB)

    Schweizer, Peter E [ORNL; Cada, Glenn F [ORNL; Bevelhimer, Mark S [ORNL

    2012-03-01

    concern that small, fragile fish early life stages may be unable to avoid being struck by the blades of hydrokinetic turbines, we found no empirical data in the published literature that document survival of earliest life-stage fish in passage by rotor blades. In addition to blade strike, research on passage of fish through conventional hydropower turbines suggested that fish mortalities from passage through the rotor swept area could also occur due to shear stresses and pressure chances in the water column (Cada et al. 1997, Turnpenny 1998). However, for most of the proposed HK turbine designs the rotors are projected to operate a lower RPM (revolutions per minute) than observed from conventional reaction turbines; the associated shear stress and pressure changes are expected to be lower and pose a smaller threat to fish survival (DOE 2009). Only a limited number of studies have been conducted to examine the risk of blade strike from hydrokinetic technologies to fish (Turnpenny et al. 1992, Normandeau et al. 2009, Seitz et al. 2011, EPRI 2011); the survival of drifting or weakly swimming fish (especially early life stages) that encounter rotor blades from hydrokinetic (HK) devices is currently unknown. Our study addressed this knowledge gap by testing how fish larvae and juveniles encountered different blade profiles of hydrokinetic devices and how such encounters influenced survivorship. We carried out a laboratory study designed to improve our understanding of how fish larvae and juvenile fish may be affected by encounters with rotor blades from HK turbines in the water column of river and ocean currents. (For convenience, these early life stages will be referred to as young of the year, YOY). The experiments developed information needed to quantify the risk (both probability and consequences) of rotor-blade strike to YOY fish. In particular, this study attempted to determine whether YOY drifting in a high-velocity flow directly in the path of the blade leading edge

  4. Laboratory Experiments on the Effects of Blade Strike from Hydrokinetic Energy Technologies on Larval and Juvenile Freshwater Fishes

    Energy Technology Data Exchange (ETDEWEB)

    Schweizer, Peter E [ORNL; Cada, Glenn F [ORNL; Bevelhimer, Mark S [ORNL

    2012-03-01

    concern that small, fragile fish early life stages may be unable to avoid being struck by the blades of hydrokinetic turbines, we found no empirical data in the published literature that document survival of earliest life-stage fish in passage by rotor blades. In addition to blade strike, research on passage of fish through conventional hydropower turbines suggested that fish mortalities from passage through the rotor swept area could also occur due to shear stresses and pressure chances in the water column (Cada et al. 1997, Turnpenny 1998). However, for most of the proposed HK turbine designs the rotors are projected to operate a lower RPM (revolutions per minute) than observed from conventional reaction turbines; the associated shear stress and pressure changes are expected to be lower and pose a smaller threat to fish survival (DOE 2009). Only a limited number of studies have been conducted to examine the risk of blade strike from hydrokinetic technologies to fish (Turnpenny et al. 1992, Normandeau et al. 2009, Seitz et al. 2011, EPRI 2011); the survival of drifting or weakly swimming fish (especially early life stages) that encounter rotor blades from hydrokinetic (HK) devices is currently unknown. Our study addressed this knowledge gap by testing how fish larvae and juveniles encountered different blade profiles of hydrokinetic devices and how such encounters influenced survivorship. We carried out a laboratory study designed to improve our understanding of how fish larvae and juvenile fish may be affected by encounters with rotor blades from HK turbines in the water column of river and ocean currents. (For convenience, these early life stages will be referred to as young of the year, YOY). The experiments developed information needed to quantify the risk (both probability and consequences) of rotor-blade strike to YOY fish. In particular, this study attempted to determine whether YOY drifting in a high-velocity flow directly in the path of the blade leading edge

  5. Evaluation of field dental equipment in a deployment environment.

    Science.gov (United States)

    Charlton, David G; Ehrlich, A Dale; Ragain, James C; Lyles, Mark B; Roberts, Howard W

    2006-03-01

    Dental officers and technicians must have reliable, durable, well-performing field dental equipment to enable them to provide dental care to deployed troops in operational environments. Unfortunately, no organized program exists to test such equipment before its purchase and use in the field. This article presents the results of a project conducted by the Naval Institute for Dental and Biomedical Research and the Air Force Dental Evaluation and Consultation Service to evaluate commercially available field dental equipment through laboratory testing and clinical-user evaluations in theater. The purpose of this 2-year project was to identify the best-performing and most cost-effective field dental equipment for possible future procurement. Initial laboratory testing was performed at the Naval Institute for Dental and Biomedical Research, and the equipment was then shipped to Kuwait for in-theater environmental and clinical-user testing. A seven-member scientific team of military dental officers and technicians was deployed for 1 month to perform in-theater testing under regional environmental conditions and to coordinate clinical-user evaluations. The testing provided beneficial results by identifying equipment that performed properly and equipment that exhibited shortcomings serious enough to render it inadequate for operational use. It is recommended that the project serve as a model for future testing and evaluation of medical/dental equipment by all of the military services.

  6. Head Impact Laboratory (HIL)

    Data.gov (United States)

    Federal Laboratory Consortium — The HIL uses testing devices to evaluate vehicle interior energy attenuating (EA) technologies for mitigating head injuries resulting from head impacts during mine/...

  7. Applied Neuroscience Laboratory Complex

    Data.gov (United States)

    Federal Laboratory Consortium — Located at WPAFB, Ohio, the Applied Neuroscience lab researches and develops technologies to optimize Airmen individual and team performance across all AF domains....

  8. MICROWAVE PROPAGATION IN TOOTH AND DENTAL DEFECT

    Directory of Open Access Journals (Sweden)

    Maria Papezova

    2016-09-01

    Full Text Available INTRODUCTION:The most common method of conventional dental diagnosisinvolves X-rays, such as Radio Tomography (RT or Computer Tomography (CT. Such methods are used for diagnosing pores in dental material that can lead to premature failure of dental material. Diagnosis by X-ray provides an objective analysis. However, repeated radiation from X-rays can cause biological damage to human tissues. From this point of view, there is a significant need to progress to quantitative non-invasive and non-destructive testing (NDT methods to measure dental material and improve treatment options. This article focuses on applying microwave technology to characterize teeth and teeth replacements. Knowledge of microwave propagation in biomaterial with no defects, using a defined microwave frequency range, and subsequently comparing the result with defective material could provide a means of dental diagnosis without the risk of radiation for the patient, i.e. without X-ray. OBJECTIVES: The primary objective of this study was to examine microwave technology in the field of dental medical diagnosis as a new NDT method. METHODS: The basic concept of applying microwave technology to characterize teeth in dental diagnosis was examined using a basic algorithm designed in the MATLAB programming language. Tests used dielectric properties of tooth and tooth decay and propagated electromagnetic (EM waves to show different characteristics of chosen materials.RESULTS: The analyses of frequency dependent reflection and transmission coefficients of the chosen material, specificallyteeth, atfrequency range 0 GHz to 30 GHz, computed differences between healthy and defective dental material.CONCLUSION: Thus, this could be used in providing a dental diagnosis without exposing patients to radiation, i.e. without X-ray. The next stage will involve creating a complete model of a jaw with teeth, and designing a sensor for crack detection for comparisons using this basic algorithm.

  9. Haptic rendering for dental training system

    Institute of Scientific and Technical Information of China (English)

    WANG DangXiao; ZHANG YuRu; WANG Yong; L(U) PeiJun; ZHOU RenGe; ZHOU WanLin

    2009-01-01

    Immersion and Interaction are two key features of virtual reality systems,which are especially important for medical applications.Based on the requirement of motor skill training in dental surgery,haptic rendering method based on triangle model is investigated in this paper.Multi-rate haptic rendering architecture is proposed to solve the contradiction between fidelity and efficiency requirements.Realtime collision detection algorithm based on spatial partition and time coherence is utilized to enable fast contact determination.Proxy-based collision response algorithm is proposed to compute surface contact point.Cutting force model based on piecewise contact transition model is proposed for dental drilling simulation during tooth preparation.Velocity-driven levels of detail hapUc rendering algorithm is proposed to maintain high update rate for complex scenes with a large number of triangles.Hapticvisual collocated dental training prototype is established using half-mirror solution.Typical dental operations have been realized Including dental caries exploration,detection of boundary within dental crose-section plane,and dental drilling during tooth preparation.The haptic rendering method is a fundamental technology to improve Immersion and interaction of virtual reality training systems,which is useful not only in dental training,but also in other surgical training systems.

  10. Fundamental Research on Percussion Drilling: Improved rock mechanics analysis, advanced simulation technology, and full-scale laboratory investigations

    Energy Technology Data Exchange (ETDEWEB)

    Michael S. Bruno

    2005-12-31

    This report summarizes the research efforts on the DOE supported research project Percussion Drilling (DE-FC26-03NT41999), which is to significantly advance the fundamental understandings of the physical mechanisms involved in combined percussion and rotary drilling, and thereby facilitate more efficient and lower cost drilling and exploration of hard-rock reservoirs. The project has been divided into multiple tasks: literature reviews, analytical and numerical modeling, full scale laboratory testing and model validation, and final report delivery. Literature reviews document the history, pros and cons, and rock failure physics of percussion drilling in oil and gas industries. Based on the current understandings, a conceptual drilling model is proposed for modeling efforts. Both analytical and numerical approaches are deployed to investigate drilling processes such as drillbit penetration with compression, rotation and percussion, rock response with stress propagation, damage accumulation and failure, and debris transportation inside the annulus after disintegrated from rock. For rock mechanics modeling, a dynamic numerical tool has been developed to describe rock damage and failure, including rock crushing by compressive bit load, rock fracturing by both shearing and tensile forces, and rock weakening by repetitive compression-tension loading. Besides multiple failure criteria, the tool also includes a damping algorithm to dissipate oscillation energy and a fatigue/damage algorithm to update rock properties during each impact. From the model, Rate of Penetration (ROP) and rock failure history can be estimated. For cuttings transport in annulus, a 3D numerical particle flowing model has been developed with aid of analytical approaches. The tool can simulate cuttings movement at particle scale under laminar or turbulent fluid flow conditions and evaluate the efficiency of cutting removal. To calibrate the modeling efforts, a series of full-scale fluid hammer

  11. Laboratory for Cognitive Studies of Work: A Case Study of the Intellectual Implications of a New Technology.

    Science.gov (United States)

    Martin, Laura M. W.; Scribner, Sylvia

    1991-01-01

    Study investigated how new technology affects the working procedures and mental activity of industrial machinists, examining how machinists learn to use computer numerical control technology. Results indicate areas of cognitive difference requiring further study (e.g., differences in conceptualization, formalization, and perspective, and shifts to…

  12. Emerging Dental Applications of Raman Spectroscopy

    Science.gov (United States)

    Choo-Smith, Lin-P'ing; Hewko, Mark; Sowa, Michael G.

    Until recently, the application of Raman spectroscopy to investigate dental tissues has primarily focused on using microspectroscopy to characterize dentin and enamel structures as well as to understand the adhesive interface of various resin and bonding agents used in restorative procedures. With the advent of improved laser, imaging/mapping and fibre optic technologies, the applications have expanded to investigate various biomedical problems ranging from oral cancer, bacterial identification and early dental caries detection. The overall aim of these applications is to develop Raman spectroscopy into a tool for use in the dental clinic. This chapter presents the recent dental applications of Raman spectroscopy as well as discusses the potential, strengths and limitations of the technology in comparison with alternative techniques. In addition, a discussion and rationale about combining Raman spectroscopy with other optical techniques will be included.

  13. Teaching dental anatomy with light-activated resins.

    Science.gov (United States)

    Chalkley, Y; Denehy, G E; Schulein, T M

    1984-04-01

    A method has been described in which light-activated resins are incorporated into the dental anatomy laboratory. This procedure is a valuable addition to the anatomy course because students (1) work with a restorative material appropriate for anterior teeth, (2) learn the unique properties of the light-activated resins, and (3) apply the principles of dental anatomy to a clinically relevant task.

  14. Dental erozyon

    NARCIS (Netherlands)

    Özen, B.; Yönel, N.; Çetiner, S.

    2015-01-01

    Dental erozyon, plak içermeyen diş yüzeyleri üzerinde içsel ve dışsal asitlerin veya şelatların etkileriyle oluşan kimyasal bir aşınmadır. İçsel ve/veya dışsal kaynaklar nedensel faktörler olarak tanımlanırken tükürük ve pelikıl gibi biyolojik faktörler, yeme ve içme alışkanlıkları ve ağız hijyeni g

  15. A Dental Education Perspective on Dental Health Policy.

    Science.gov (United States)

    Morris, Alvin L.

    1985-01-01

    Two issues related to dental health policy are examined: the contribution of dental education to the process by which dental health policy is established, and the nature of dental education's response to established policies. (MLW)

  16. Correction parameters in conventional dental radiography for dental implant

    Directory of Open Access Journals (Sweden)

    Barunawaty Yunus

    2009-12-01

    Full Text Available Background: Radiographic imaging as a supportive diagnostic tool is the essential component in treatment planning for dental implant. It help dentist to access target area of implant due to recommendation of many inventions in making radiographic imaging previously. Along with the progress of science and technology, the increasing demand of easier and simpler treatment method, a modern radiographic diagnostic for dental implant is needed. In fact, Makassar, especially in Faculty of Dentistry Hasanuddin University, has only a conventional dental radiography. Researcher wants to optimize the equipment that is used to obtain parameters of the jaw that has been corrected to get accurate dental implant. Purpose: This study aimed to see the difference of radiographic imaging of dental implant size which is going to be placed in patient before and after correction. Method: The type of research is analytical observational with cross sectional design. Sampling method is non random sampling. The amount of samples is 30 people, male and female, aged 20–50 years old. The correction value is evaluated from the parameter result of width, height, and thick of the jaw that were corrected with a metal ball by using conventional dental radiography to see the accuracy. Data is analyzed using SPSS 14 for Windows program with T-test analysis. Result: The result that is obtained by T-Test analysis results with significant value which p<0.05 in the width and height of panoramic radiography technique, the width and height of periapical radiography technique, and the thick of occlusal radiography technique before and after correction. Conclusion: It can be concluded that there is a significant difference before and after the results of panoramic, periapical, and occlusal radiography is corrected.

  17. Ceramics for Dental Applications: A Review

    Directory of Open Access Journals (Sweden)

    Julie A. Holloway

    2010-01-01

    Full Text Available Over the past forty years, the technological evolution of ceramics for dental applications has been remarkable, as new materials and processing techniques are steadily being introduced. The improvement in both strength and toughness has made it possible to expand the range of indications to long-span fixed partial prostheses, implant abutments and implants. The present review provides a state of the art of ceramics for dental applications.

  18. Materials Science and Technology, Volume 14, Materials Science and Technology A Comprehensive Treatment - Volume 14: Medical and Dental Materials Cahn,R.W.(ed.)/Haasen,P.(ed.)/Kramer,E.J.(ed.)

    Science.gov (United States)

    Williams, David F.

    1996-12-01

    The applications of metals, ceramics, and polymers in medical and dental engineering is becoming ever more widespread. Technologists in these fields are provided with a unique overview of materials, performances and applications. From the Contents: Williams: Biofunctionality and Biocompatibility. Kohn/Ducheyne: Materials for Bone and Joint Replacement. Baquey: Materials in the Cardiovascular System. Aebischer/Goddard/ Galletti/ Lysaght: Biomaterials and Artificial Organs. Yannas: Materials for Skin and Nerve Regeneration. Watts: Dental Restorative Materials. Williams: Materials for Oral and Maxillofacial Surgery/Materials for Ophthalmology. Causton: Medical and Dental Adhesives. Reichert/Saavedra: Materials Consideration in the Selection, Performance, and Adhesion of Polymeric Encapsulants for Implantable Sensors. Campbell/Jones: Materials for Implantable Electrodes and Electronic Devices. Brunstedt/Anderson: Materials for Drug Delivery. Jones: Materials for Fixed and Removable Prosthodontics.

  19. A Study of a Functional Approach to Defining Instructional Competencies and Measuring Faculty Performance in Medical Laboratory Technology.

    Science.gov (United States)

    Wiesenfeld, Laura Adina

    In order to develop a humanistic approach to evaluating faculty, a pilot study was conducted of 27 students and 14 instructors in an associate degree program for medical laboratory technicians. Selected personal dimensions of the sample population were examined to chart each individual's personality, theoretical learning preferences, modalities of…

  20. COMMUNITY DENTAL HEALTH SURVEY TRAINING TO DENTAL HEALTH PERSONNEL

    OpenAIRE

    Sandra Fikawati; Ita Yulita

    2015-01-01

    Dentist and dental nurse as dental health personnel in community health center are spearheads in community dental health service. The effectiveness and efficacy of community dental health service needs updated adequate dental health knowledge and skill. One effort to assure the fulfillment of those needs is by providing community dental health survey training. This training aims at improving the skill and capability of dental health personnel to conduct dental health survey. The training cons...

  1. Using a Visible Light-Polymerized Resin to Fabricate an Interim Partial Removable Dental Prosthesis.

    Science.gov (United States)

    Segal, Aaron; Yu, Hui Wen; Elkassaby, Heba

    2017-02-01

    An interim partial removable dental prosthesis (RDP) is any dental prosthesis that replaces some teeth in a partially dentate arch designed to enhance esthetics, stabilization, and/or function for a limited period of time, after which it is to be replaced by a definitive dental prosthesis. This article describes a technique that uses a visible light-polymerized (VLP) resin as the base material for an interim partial RDP. This technique can be easily accomplished in a dental office or laboratory and results in a predictable dental prosthesis. This technique eliminates the need for laboratory processing.

  2. Nanoparticle release from dental composites.

    Science.gov (United States)

    Van Landuyt, K L; Hellack, B; Van Meerbeek, B; Peumans, M; Hoet, P; Wiemann, M; Kuhlbusch, T A J; Asbach, C

    2014-01-01

    Dental composites typically contain high amounts (up to 60 vol.%) of nanosized filler particles. There is a current concern that dental personnel (and patients) may inhale nanosized dust particles (composite dust was analyzed in real work conditions. Exposure measurements of dust in a dental clinic revealed high peak concentrations of nanoparticles in the breathing zone of both dentist and patient, especially during aesthetic treatments or treatments of worn teeth with composite build-ups. Further laboratory assessment confirmed that all tested composites released very high concentrations of airborne particles in the nanorange (>10(6)cm(-3)). The median diameter of airborne composite dust varied between 38 and 70 nm. Electron microscopic and energy dispersive X-ray analysis confirmed that the airborne particles originated from the composite, and revealed that the dust particles consisted of filler particles or resin or both. Though composite dust exhibited no significant oxidative reactivity, more toxicological research is needed. To conclude, on manipulation with the bur, dental composites release high concentrations of nanoparticles that may enter deeply into the lungs. Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  3. Chemical Technology Division progress report for the period April 1, 1981-March 31, 1983. [Oak Ridge National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    1983-09-01

    Separate abstracts were prepared for eight sections of the report: nuclear waste management; fossil energy; basic science and technology; biotechnology and environmental programs; transuranium-element processing; Nuclear Regulatory Commission programs; Three Mile Island support studies; and miscellaneous programs.

  4. Relationships between dental personnel and non-dental primary health care providers in rural and remote Queensland, Australia: dental perspectives.

    Science.gov (United States)

    Stuart, Jackie; Hoang, Ha; Crocombe, Len; Barnett, Tony

    2017-06-19

    Collaboration between dental practitioners and non-dental primary care providers has the potential to improve oral health care for people in rural and remote communities, where access to oral health services is limited. However, there is limited research on collaboration between these professional disciplines. The purpose of this paper was to explore the relationships between dental practitioners and non-dental primary care providers from rural and remote areas of Queensland and to identify strategies that could improve collaboration between these disciplines from the perspective of dental participants. Semi-structured interviews were conducted between 2013 and 2015 with visiting, local and regional dental practitioners (n = 12) who had provided dental services to patients from eight rural and remote Queensland communities that did not have a resident dentist. Participants were purposely recruited through a snow ball sampling technique. Interview data were analysed using thematic analysis with the assistance of QSR Nvivo v.10. Four major themes emerged from the data: (1) Communication between dental practitioners and rural primary care providers; (2) Relationships between dental and primary care providers; (3) Maintenance of professional dualism; (4) Strategies to improve interprofessional relationships (with subthemes: face to face meetings; utilisation of technology; oral health training for primary care providers; and having a community based oral health contact person). Participants observed that there was a lack of communication between the dental providers who saw patients from these rural communities and the primary care providers who worked in each community. This was attributed to poor communication, the high turnover of staff and the siloed behaviours of some practitioners. Visiting dental practitioners were likely to have stronger professional relationships with hospital nursing, administrative and allied health care staff who were often long term

  5. Effects of Dental 3D Multimedia System on the Performance of Junior Dental Students in Preclinical Practice: A Report from China

    Science.gov (United States)

    Hu, Jian; Yu, Hao; Shao, Jun; Li, Zhiyong; Wang, Jiawei; Wang, Yining

    2009-01-01

    Background: Computer-assisted tools are rarely adopted for dental education in China. In China, 3D digital technology, such as Virtual Reality Systems, are often rejected in the dental field due to prohibitive pricing. There is also a reluctance to move away from traditional patterns of dental education. Objective: The current study is one of a…

  6. Effects of Dental 3D Multimedia System on the Performance of Junior Dental Students in Preclinical Practice: A Report from China

    Science.gov (United States)

    Hu, Jian; Yu, Hao; Shao, Jun; Li, Zhiyong; Wang, Jiawei; Wang, Yining

    2009-01-01

    Background: Computer-assisted tools are rarely adopted for dental education in China. In China, 3D digital technology, such as Virtual Reality Systems, are often rejected in the dental field due to prohibitive pricing. There is also a reluctance to move away from traditional patterns of dental education. Objective: The current study is one of a…

  7. Research on Heat Recovery Technology for Reducing the Energy Consumption of Dedicated Ventilation Systems: An Application to the Operating Model of a Laboratory

    Directory of Open Access Journals (Sweden)

    Lian Zhang

    2016-01-01

    Full Text Available In this research, the application of heat pipes in the air handler dedicated to decoupling dehumidification from cooling to reduce energy consumption was simulated and investigated by simulations and experimental studies. The cooling load profiles and heat pipes with effectiveness of 0.45 and 0.6, respectively, were evaluated in achieving the desired space conditions and calculated hour by hour. The results demonstrated that for all examined cases, a heat pipe heat exchanger (HPHX can be used to save over 80% of the energy during the hours of operation of air conditioning. The overall energy reduction rate was from 3.2% to 4.5% under air conditioning system conditions. It was found that the energy saving potential of a laboratory was higher than for other kinds of buildings. Therefore, the dedicated ventilation system combined with heat recovery technology can be efficiently applied to buildings, especially for laboratories in subtropical areas.

  8. NREL and Sandia National Laboratories (SNL) Support of Ocean Renewable Power Company's TidGen™ Power System Technology Readiness Advancement Initiative Project

    Energy Technology Data Exchange (ETDEWEB)

    LiVecchi, Al [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-05-07

    This document summarizes the tasks identified for National Laboratory technical support of Ocean Renewable Power Corporation (ORPC) DOE grant awarded under the FY10 Industry Solicitation DE-FOA-0000293: Technology Readiness Advancement Initiative. The system ORPC will deploy in Cobscook Bay, ME is known as the TidGen™ Power System. The Turbine Generator Unit (TGU) each have a rated capacity of 150 to 175 kW, and they are mounted on bottom support frames and connected to an onshore substation using an underwater power and control cable. This system is designed for tidal energy applications in water depths from 60 to 150 feet. In funding provided separately by DOE, National Laboratory partners NREL and SNL will provide in-kind resources and technical expertise to help ensure that industry projects meet DOE WWPP (Wind and Water Power Program) objectives by reducing risk to these high value projects.

  9. Research on intelligent laboratory based on IOT technology%基于物联网技术的智能实验室的研究

    Institute of Scientific and Technical Information of China (English)

    王慧渊; 张珣

    2013-01-01

    针对当前实验室管理效率低、信息化程度不高等问题,为了探索智能实验室的应用需求和特点,研制了一种基于RFID、无线传感网、嵌入式和Internet等物联网技术的监控系统。该系统利用PHP与MySQL构建了网络管理系统,并使用S3C2440A处理器和DM9000以太网控制器设计了嵌入式控制终端,同时利用ZigBee技术组建了无线传感网。研究结果表明:该系统层次分明,远程监控稳定可靠,从而为智能实验室的研究提供了一个雏形。%Aiming at the problem of low management efifciency and low informationization degree of laboratory, and to explore the requirements and characteristics of intelligent laboratory application, a monitoring system is developed, which is based on IOT technology such as RFID, wireless sensor networks, embedded technology, and uses PHP and MySQL build up the network management system. The embedded control terminal is designed by using S3C2440A processor and DM9000 Ethernet controller, and the wireless sensor network is set up with ZigBee technology. The research results show that the scheme is logical, feasible and reliable in remote monitoring, thus it can provide a rudiment for intelligence laboratory.

  10. Evaluation of a 3-D interactive tooth atlas by dental students in dental anatomy and endodontics courses.

    Science.gov (United States)

    Wright, Edward F; Hendricson, William D

    2010-02-01

    Advances in information and communication technology continually offer innovations to assist faculty in their efforts to help students learn new information or develop new skills. However, faculty members are often hesitant to incorporate these innovations into their courses out of fear that these new methods may not provide the anticipated outcomes. Hence, students are often the subjects of educational trials to evaluate curriculum innovations by comparing a new teaching/learning method to traditional lecture-based instruction. The most typical finding is that students can learn equally well by either method. However, two questions that have not been studied extensively in dental education are whether dental students will actually use computer-based educational resources made available to them and whether students perceive these materials to provide a value-added learning experience. Accordingly, the goals of this study were to determine whether first-year dental students (D1), second-year dental students (D2), and third-year dental students (D3) would 1) use an interactive tooth atlas, available on a DVD, as a study aid and 2) perceive that the atlas provided sufficient value-added benefit for their dental anatomy (D1), preclinical laboratory endodontics (D2), and clinical endodontics (D3) courses to recommend adding it to their school's comprehensive electronic resources. A low percentage of the students (14 percent; 40/289) voluntarily downloaded the atlas from a DVD to their laptops prior to the addition of incentives in the form of atlas-related examination questions. Even after incentives were added, only 43 percent of the students (126/289) downloaded the DVD. After using the atlas, students responded to the statement "Using the 3D Interactive Tooth Atlas was beneficial for me" on a 0 to 10 scale with 0 representing strongly disagree, 5 representing unsure, and 10 representing strongly agree. The mean rankings were 5.34 for D1s, 6.79 for D2s, and 7.28 for D

  11. Real time Intelligent Control Laboratory (RT-ICL) of PowerLabDK for smart grid technology development

    DEFF Research Database (Denmark)

    Ostergaard, Jacob; Wu, Qiuwei; Garcia-Valle, Rodrigo

    2012-01-01

    This paper presents the Intelligent Control Laboratory (ICL) of the PowerLabDK and describes examples of ongoing research work utilizing the ICL. The ICL is comprised of a real time digital simulator (RTDS) with 5 racks, a full scale SCADA system and experimental control room with a link to the B......This paper presents the Intelligent Control Laboratory (ICL) of the PowerLabDK and describes examples of ongoing research work utilizing the ICL. The ICL is comprised of a real time digital simulator (RTDS) with 5 racks, a full scale SCADA system and experimental control room with a link...... to the Bornholm power system data, an IBM blade server for optimization and control implementation, and a Phasor Measurement Unit (PMU) Lab. It is possible to interface PMUs and other hardware with the RTDS for hardware-in-the-loop (HIL) and power-hardware-in-the-loop (PHIL) tests. The ICL can interface...

  12. Pushing the Horizon. Seventy-Five Years of High Stakes Science and Technology at the Naval Research Laboratory

    Science.gov (United States)

    2001-01-01

    Commander Wilber J. Ruble, head of the bureau’s Radio Division, was even asking the Laboratory to set down production specifications so that manu...astronomer Ken - neth Lang in the March, 1997 Scientific American.29 That such con- certed action occurs on such a vast scale is startling and not yet...Rosett, Walter, 61, 62 Ruble, Wilber J., 87 Rudolph, Alan, 311 Rustan, P., 205 Ruth, Mildred K., 111 S Saalfeld, Fred, 248 Safeguard system, 260 406

  13. [The application of universal adhesives in dental bonding].

    Science.gov (United States)

    Guo, Jingmei; Lei, Wenlong; Yang, Hongye; Huang, Cui

    2016-03-01

    The bonding restoration has become an important clinical technique for the development of dental bonding technology. Because of its easy operation and the maximum preservation of tooth tissues, bonding repair is widely used in dental restoration. The recent multi-mode universal adhesives have brought new progress in dental bonding restoration. In this article the universal adhesives were reviewed according to its definition, development, improvement, application features and possible problems.

  14. A New Way to Introduce Microarray Technology in a Lecture/Laboratory Setting by Studying the Evolution of This Modern Technology

    Science.gov (United States)

    Rowland-Goldsmith, Melissa

    2009-01-01

    DNA microarray is an ordered grid containing known sequences of DNA, which represent many of the genes in a particular organism. Each DNA sequence is unique to a specific gene. This technology enables the researcher to screen many genes from cells or tissue grown in different conditions. We developed an undergraduate lecture and laboratory…

  15. The Center for Technology for Advanced Scientific Component Software (TASCS) Lawrence Livermore National Laboratory - Site Status Update

    Energy Technology Data Exchange (ETDEWEB)

    Epperly, T W

    2008-12-03

    This report summarizes LLNL's progress for the period April through September of 2008 for the Center for Technology for Advanced Scientific Component Software (TASCS) SciDAC. The TASCS project is organized into four major thrust areas: CCA Environment (72%), Component Technology Initiatives (16%), CCA Toolkit (8%), and User and Application Outreach & Support (4%). The percentage of LLNL's effort allocation is shown in parenthesis for each thrust area. Major thrust areas are further broken down into activity areas, LLNL's effort directed to each activity is shown in Figure 1. Enhancements, Core Tools, and Usability are all part of CCA Environment, and Software Quality is part of Component Technology Initiatives. The balance of this report will cover our accomplishments in each of these activity areas.

  16. Development of health inter-professional telemedicine practice through simulation scenario training with students of physiotherapy-, occupational therapy-, medical laboratory technology, and nursing education

    DEFF Research Database (Denmark)

    Nortvig, Anne-Mette; Vestergaard, Kitt

    . Aims: The purpose of the project was • to develop practice oriented competences related to telemedicine in an inter-professional and a cross-sectoral context among health professional students of physiotherapy-, occupational therapy-, medical laboratory technology-, and nursing education. • to motivate...... and retain male students by the use of simulation training that involves technology. Methodology: The project was settled as a cross-professional telemedicine course on health educations. Nursing students (N=20) and physiotherapy students (N=34) participated actively and the scenarios were filmed and enacted...... and qualitative interviews. Recordings, field notes, memos and observations of students and lecturers were used as empirical material for follow-up research. Data were analyzed in order to categorize the theoretical perspectives relating to learning and motivation. Results: Evaluations and follow-up research...

  17. Living laboratory for Nikola Tesla. Living laboratories, Tesla, Second Life, sustainable construction technologies and renewable energy sources; Wohnlabor fuer Nikola Tesla. Ueber Wohnlabors, Tesla, Second Life, nachhaltige Bautechnologien und erneuerbare Energie

    Energy Technology Data Exchange (ETDEWEB)

    Redi, Ivan; Redi, Andrea; Jovanovic, Branimir (and others)

    2008-07-01

    Adventure is the opposite of conventional teaching. Adventure is the moment when experience alone is not enough. Sometimes, courageous people challenge the nature of things, helping us to get new insights and achieve a new viewpoint. The experience-oriented ''work in progress'' university is an adventure of this kind. The book looks into the Tesla laboratory and the Wardenclyffe Tower, both of which could not be completed for financial reasons, and addresses them from today's state of technology. The conceptional section is based on the ''Tesla doctrine'' which comprises fundamental philosophical statements on civilisatory progress. The book presents the results of the investigation. The 16 architectural projects presented here were developed live on the online platform. Second Life, ORTLOS Sim. (orig.)

  18. 75 FR 17281 - Changes in Hourly Fee Rates for Science and Technology Laboratory Services-Fiscal Years 2010-2012

    Science.gov (United States)

    2010-04-06

    ..., operating costs, instrumentation and training, equipment maintenance costs, and program and agency...). These capital improvement costs are included in the normal operations of the Science and Technology... is a voluntary program and the costs to each user will increase proportionally to their use of...

  19. Dental Encounter System (DES)

    Data.gov (United States)

    Department of Veterans Affairs — Dental Encounter System (DES) is an automated health care application designed to capture critical data about the operations of VA Dental Services. Information on...

  20. Dental education in Malaysia.

    Science.gov (United States)

    Komabayashi, Takashi; Razak, Abdul Aziz Abdul; Bird, William F

    2007-12-01

    There was only one dental school in Malaysia until 1997 but five new schools have been established since 1998. This review provides information about dental education in Malaysia including; the history of dental education, the current dental school system and curriculum, and dental licensure. There are four public and two private dental schools in Malaysia. High school graduates are required to take the nationwide matriculation entrance examination or the Higher School Certificate (HSC) to apply for a dental degree programme. A five-year dental programme leads to the BDS or the DDS degree. National or state examinations are not required to practise dentistry. Currently, there are approximately 2,500 dentists, with a ratio of 1 dentist for every 10,000 people.