Strengths and Weaknesses of the Current Dental Hygiene Educational System.

Science.gov (United States)

Theile, Cheryl Westphal

2017-09-01

The state of the dental hygiene educational system in the United States is evolving. The numbers of programs, extent of curricula, and diversity of students, faculty, and practice settings vary significantly across the country. New trends in workforce utilization and delivery models are challenging current educational foundations and mandating an interprofessional approach to both the education and practice of dental hygienists. This article presents an overview of the current state of dental hygiene education to create a baseline for discussion of desired educational models for 2040. The strengths and weaknesses are defined to motivate change. Limitations of the current two-year associate degree are emphasized, along with the need to add expanded content and development of new skills. The developing non-traditional practice settings bring both a challenge to dental hygiene education and a promise of increasing potential in primary care interprofessional settings for the 21 st century. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

[Social medicine and dental health].

Science.gov (United States)

Grünfeld, B

1976-03-01

Some socio-medical aspects of preventive and curative dental care. Preventive and early curative dental care is considered as an integral part of general health behavior in the individual. Different variables possibly determining such behavior are discussed. Demographic factors as age, sex, place of residence, as well as family and educational background, income and vocation seem to be of importance. A dental health delivery system free of charge to everyone in the age group 6-18, eventually up to 21 years has been available for several years in Norway. We assume that this has had a great impact upon the motivations for a positive atitude towards preventive care, particularly since economic barriers have been reduced simultaneously with shift in the popular value aspects of having good dental health status. Plans for a future incorporation of dental care into a total national health service, comprising the entire population, in order to make the delivery system feasible for everyone, will probably stimulate a still wider interest and motivation for preventive and early dental care.

Innovative Models of Dental Care Delivery and Coverage: Patient-Centric Dental Benefits Based on Digital Oral Health Risk Assessment.

Science.gov (United States)

Martin, John; Mills, Shannon; Foley, Mary E

2018-04-01

Innovative models of dental care delivery and coverage are emerging across oral health care systems causing changes to treatment and benefit plans. A novel addition to these models is digital risk assessment, which offers a promising new approach that incorporates the use of a cloud-based technology platform to assess an individual patient's risk for oral disease. Risk assessment changes treatment by including risk as a modifier of treatment and as a determinant of preventive services. Benefit plans are being developed to use risk assessment to predetermine preventive benefits for patients identified at elevated risk for oral disease. Copyright © 2017 Elsevier Inc. All rights reserved.

Status of governmental oral health care delivery system in Haryana, India

Directory of Open Access Journals (Sweden)

Ashish Vashist

2016-01-01

Full Text Available Background: Health system should be organized to meet the needs of entire population of the nation. This means that the state has the direct responsibility for the health of its population and improving the quality of life through research, education, and provision of health services. The present study was conducted to evaluate the government oral health care delivery system in Haryana, India. Materials and Methods: The present cross-sectional study was conducted among 135 dental care units (DCUs of various primary health centers (PHCs, community health centers (CHCs, and general hospitals (GHs existing in the state by employing a cluster random sampling technique. Data regarding the provision of water and electricity supply, dental man power and their qualification, number and type of instruments in the dental operatory unit, etc., were collected on a structured format. Statistical analysis was done using number and percentages (SPSS package version 16. Results: Alternative source of electricity (generator existed in only a few of health centers. About 93.4% (155 of the staff were graduates (BDS and 6.6% (11 were postgraduates (MDS. Ultrasonic scaler was available at dental units of 83.1% (64 of PHCs, 73.1% (19 of CHCs, and 93.8% (30 of GHs. Patient drapes were provided in 48.1% (65 of the DCUs, doctor′s aprons were provided in 74.1% (100 of the places. Conclusion: There is a shortfall in infrastructure and significant problem with the adequacy of working facilities. A great deal of effort is required to harmonize the oral health care delivery system.

Dental Encounter System (DES)

Data.gov (United States)

Department of Veterans Affairs — Dental Encounter System (DES) is an automated health care application designed to capture critical data about the operations of VA Dental Services. Information on...

The Allied Dental Professions: Executive Summary.

Science.gov (United States)

Fried, Jacquelyn L

2017-09-01

This executive summary for Section 5 of the "Advancing Dental Education in the 21 st Century" project addresses the current and future educational systems for dental assisting, dental hygiene, dental therapy, and dental laboratory technology. Nineteen experts prepared six background articles on the educational changes necessary for future roles and practices. The key issues addressed relate to delivery system changes, educational curricula, scopes of practice, regulatory measures, and the public's oral health. The major finding is that substantial reforms will be needed to adequately prepare allied oral health professionals for the changes anticipated in 2040. A reconsideration of current accreditation guidelines, more flexibility with scopes of practice, and an adherence to rigorous academic programs are essential elements for the future of these professions.

Medicaid Adult Dental Benefits Increase Use Of Dental Care, But Impact Of Expansion On Dental Services Use Was Mixed.

Science.gov (United States)

Singhal, Astha; Damiano, Peter; Sabik, Lindsay

2017-04-01

Dental coverage for adult enrollees is an optional benefit under Medicaid. Thirty-one states and the District of Columbia have expanded eligibility for Medicaid under the Affordable Care Act. Millions of low-income adults have gained health care coverage and, in states offering dental benefits, oral health coverage as well. Using data for 2010 and 2014 from the Behavioral Risk Factor Surveillance System, we examined the impact of Medicaid adult dental coverage and eligibility expansions on low-income adults' use of dental care. We found that low-income adults in states that provided dental benefits beyond emergency-only coverage were more likely to have had a dental visit in the past year, compared to low-income adults in states without such benefits. Among states that provided dental benefits and expanded their Medicaid program, regression-based estimates suggest that childless adults had a significant increase (1.8 percentage points) in the likelihood of having had a dental visit, while parents had a significant decline (8.1 percentage points). One possible explanation for the disparity is that after expansion, newly enrolled childless adults might have exhausted the limited dental provider capacity that was available to parents before expansion. Additional policy-level efforts may be needed to expand the dental care delivery system's capacity. Project HOPE—The People-to-People Health Foundation, Inc.

The Effect of Recent Trends on Dental Hygiene.

Science.gov (United States)

Douglass, Chester W.

1991-01-01

Six trends affecting dental hygiene practice are discussed: demographic changes; disease pattern changes; higher societal expectations; financing and delivery system changes; technological advancement; and regulatory and legislative trends. It is argued that, though the trends reflect positively on dental hygiene, practitioners need to increase…

Transition of a traditional pharmacology course for dental students to an online delivery format: a pilot project.

Science.gov (United States)

Gadbury-Amyot, Cynthia C; Brockman, William G

2011-05-01

The purpose of this report is to describe the rationale and subsequent transition of a pharmacology course for dental students from a traditional face-to-face lecture format to online delivery using a course management system (CMS). A dental school faculty member with dental and pharmacology degrees and a Ph.D. was asked to serve as course director and to develop and implement a nontraditional course using the Blackboard CMS technology, which houses asynchronous course content materials, study guides, and online resource materials. Respondus software was used to create, manage, and administer weekly online quizzes. A comprehensive midterm and final examination were conducted in a traditional face-to-face setting. A survey was used to capture student satisfaction with this self-directed introductory pharmacology course. Participants were second-year dental students (Classes of 2011 and 2012). There was a survey response rate of 91 percent (179/197). The Likert-style survey questions produced ordinal data from which the median and interquartile range were calculated. On a scale in which 1=Poor, 5=Excellent, the median evaluation for the instructor was 4 (IQR=1.5). On a global question that asked how students rate the course overall, the median score was 4 (IQR=1.0). Results show that a majority of students were positive about the online delivery of the introductory pharmacology course and for many students this was their first online course experience. Resistance to self-directed learning was a theme with those students who rated the course poorly. In a comparison of overall course grades from the previous year, student performance in this course was much stronger. As a result of student feedback seeking more interaction with the course director, it was determined that the next time the course is offered there will be additional opportunities for greater face-to-face time with the instructor. Ongoing evaluation will be important as new teaching technologies emerge

A national analysis of dental waiting lists and point-in-time geographic access to subsidised dental care: can geographic access be improved by offering public dental care through private dental clinics?

Science.gov (United States)

Dudko, Yevgeni; Kruger, Estie; Tennant, Marc

2017-01-01

Australia is one of the least densely populated countries in the world, with a population concentrated on or around coastal areas. Up to 33% of the Australian population are likely to have untreated dental decay, while people with inadequate dentition (fewer than 21 teeth) account for up to 34% of Australian adults. Historically, inadequate access to public dental care has resulted in long waiting lists, received much media coverage and been the subject of a new federal and state initiative. The objective of this research was to gauge the potential for reducing the national dental waiting list through geographical advantage, which could arise from subcontracting the delivery of subsidised dental care to the existing network of private dental clinics across Australia. Eligible population data were collected from the Australian Bureau of Statistics website. Waiting list data from across Australia were collected from publicly available sources and confirmed through direct communication with each individual state or territory dental health body. Quantum geographic information system software was used to map distribution of the eligible population across Australia by statistical area, and to plot locations of government and private dental clinics. Catchment areas of 5 km for metropolitan clinics and 5 km and 50 km for rural clinics were defined. The number of people on the waiting list and those eligible for subsidised dental care covered by each of the catchment areas was calculated. Percentage of the eligible population and those on the waiting list that could benefit from the potential improvement in geographic access was ascertained for metropolitan and rural residents. Fifty three percent of people on the waiting list resided within metropolitan areas. Rural and remote residents made up 47% of the population waiting to receive care. The utilisation of both government and private dental clinics for the delivery of subsidised dental care to the eligible population

Pain Experience and Behavior Management in Pediatric Dentistry: A Comparison between Traditional Local Anesthesia and the Wand Computerized Delivery System.

Science.gov (United States)

Garret-Bernardin, Annelyse; Cantile, Tiziana; D'Antò, Vincenzo; Galanakis, Alexandros; Fauxpoint, Gabriel; Ferrazzano, Gianmaria Fabrizio; De Rosa, Sara; Vallogini, Giulia; Romeo, Umberto; Galeotti, Angela

2017-01-01

Aim. To evaluate the pain experience and behavior during dental injection, using the Wand computerized delivery system versus conventional local anesthesia in children and adolescents. Methods. An observational crossover split mouth study was performed on 67 patients (aged 7 to 15 years), requiring local anesthesia for dental treatments in both sides of the dental arch. Patients received both types of injections in two separate appointments, one with the use of a Computer Delivery System (the Wand STA system) and one with the traditional syringe. The following data were recorded: pain rating; changes in heart rate; level of collaboration; patient satisfaction. The data were analyzed using ANOVA for quantitative outcomes and nonparametric analysis (Kruskal-Wallis) for qualitative parameters. Results. The use of the Wand system determined significantly lower pain ratings and lower increase of heart rate than the traditional syringe. During injection, the number of patients showing a relaxed behavior was higher with the Wand than with the traditional local anesthesia. The patient level of satisfaction was higher with the Wand compared to the conventional local anesthesia. Conclusions. The Wand system may provide a less painful injection when compared to the conventional local anesthesia and it seemed to be better tolerated with respect to a traditional syringe.

Pain Experience and Behavior Management in Pediatric Dentistry: A Comparison between Traditional Local Anesthesia and the Wand Computerized Delivery System

Directory of Open Access Journals (Sweden)

Annelyse Garret-Bernardin

2017-01-01

Full Text Available Aim. To evaluate the pain experience and behavior during dental injection, using the Wand computerized delivery system versus conventional local anesthesia in children and adolescents. Methods. An observational crossover split mouth study was performed on 67 patients (aged 7 to 15 years, requiring local anesthesia for dental treatments in both sides of the dental arch. Patients received both types of injections in two separate appointments, one with the use of a Computer Delivery System (the Wand STA system and one with the traditional syringe. The following data were recorded: pain rating; changes in heart rate; level of collaboration; patient satisfaction. The data were analyzed using ANOVA for quantitative outcomes and nonparametric analysis (Kruskal–Wallis for qualitative parameters. Results. The use of the Wand system determined significantly lower pain ratings and lower increase of heart rate than the traditional syringe. During injection, the number of patients showing a relaxed behavior was higher with the Wand than with the traditional local anesthesia. The patient level of satisfaction was higher with the Wand compared to the conventional local anesthesia. Conclusions. The Wand system may provide a less painful injection when compared to the conventional local anesthesia and it seemed to be better tolerated with respect to a traditional syringe.

Utilization of dental health services by Danish adolescents attending private or public dental health care systems

DEFF Research Database (Denmark)

Christensen, Lisa Bøge; Petersen, Poul Erik; Bastholm, Annelise

2002-01-01

The objectives of the study were: 1) to describe the choice of dental care system among 16-year-olds, 2) to describe the utilization of dental services among 16-17-year-olds enrolled in either public or private dental care systems, and to compare the dental services provided by the alternative...

Population-centered Risk- and Evidence-based Dental Interprofessional Care Team (PREDICT): study protocol for a randomized controlled trial.

Science.gov (United States)

Cunha-Cruz, Joana; Milgrom, Peter; Shirtcliff, R Michael; Bailit, Howard L; Huebner, Colleen E; Conrad, Douglas; Ludwig, Sharity; Mitchell, Melissa; Dysert, Jeanne; Allen, Gary; Scott, JoAnna; Mancl, Lloyd

2015-06-20

To improve the oral health of low-income children, innovations in dental delivery systems are needed, including community-based care, the use of expanded duty auxiliary dental personnel, capitation payments, and global budgets. This paper describes the protocol for PREDICT (Population-centered Risk- and Evidence-based Dental Interprofessional Care Team), an evaluation project to test the effectiveness of new delivery and payment systems for improving dental care and oral health. This is a parallel-group cluster randomized controlled trial. Fourteen rural Oregon counties with a publicly insured (Medicaid) population of 82,000 children (0 to 21 years old) and pregnant women served by a managed dental care organization are randomized into test and control counties. In the test intervention (PREDICT), allied dental personnel provide screening and preventive services in community settings and case managers serve as patient navigators to arrange referrals of children who need dentist services. The delivery system intervention is paired with a compensation system for high performance (pay-for-performance) with efficient performance monitoring. PREDICT focuses on the following: 1) identifying eligible children and gaining caregiver consent for services in community settings (for example, schools); 2) providing risk-based preventive and caries stabilization services efficiently at these settings; 3) providing curative care in dental clinics; and 4) incentivizing local delivery teams to meet performance benchmarks. In the control intervention, care is delivered in dental offices without performance incentives. The primary outcome is the prevalence of untreated dental caries. Other outcomes are related to process, structure and cost. Data are collected through patient and staff surveys, clinical examinations, and the review of health and administrative records. If effective, PREDICT is expected to substantially reduce disparities in dental care and oral health. PREDICT can be

Advantages of the Dental Practice-Based Research Network Initiative and Its Role in Dental Education

Science.gov (United States)

Curro, Frederick A.; Grill, Ashley C.; Thompson, Van P.; Craig, Ronald G.; Vena, Don; Keenan, Analia V.; Naftolin, Frederick

2012-01-01

Practice-based research networks (PBRNs) provide a novel venue in which providers can increase their knowledge base and improve delivery of care through participation in clinical studies. This article describes some aspects of our experience with a National Institute of Dental and Craniofacial Research-supported PBRN and discusses the role it can play in dental education. PBRNs create a structured pathway for providers to advance their professional development by participating in the process of collecting data through clinical research. This process allows practitioners to contribute to the goals of evidence-based dentistry by helping to provide a foundation of evidence on which to base clinical decisions as opposed to relying on anecdotal evidence. PBRNs strengthen the professional knowledge base by applying the principles of good clinical practice, creating a resource for future dental faculty, training practitioners on best practices, and increasing the responsibility, accountability, and scope of care. PBRNs can be the future pivotal instruments of change in dental education, the use of electronic health record systems, diagnostic codes, and the role of comparative effectiveness research, which can create an unprecedented opportunity for the dental profession to advance and be integrated into the health care system. PMID:21828299

Dental care for aging populations in Denmark, Sweden, Norway, United kingdom, and Germany

DEFF Research Database (Denmark)

Holm-Pedersen, Poul; Vigild, Merete; Nitschke, Ina

2005-01-01

This article reviews access to and financing of dental care for aging populations in selected nations in Europe. Old age per se does not seem to be a major factor in determining the use of dental services. Dentition status, on the other hand, is a major determinant of dental attendance. In additi...... in Europe as well as in the United States....... dentistry discourage dentists from seeking opportunities to treat geriatric patients? Overall, the availability of dental services, the organization of the dental health care delivery system, and price subsidy for dental treatment are important factors influencing access to dental care among older people...

Systemic Assessment of Patients Undergoing Dental Implant ...

African Journals Online (AJOL)

Background: Procedure‑related and patient‑related factors influence the prognosis of dental implants to a major extent. Hence, we aimed to evaluate and analyze various systemic factors in patients receiving dental implants. Materials and Methods: Fifty‑one patients were included in the study, in which a total of 110 dental ...

Calcium phosphate ceramics in drug delivery

Science.gov (United States)

Bose, Susmita; Tarafder, Solaiman; Edgington, Joe; Bandyopadhyay, Amit

2011-04-01

Calcium phosphate (CaP) particulates, cements and scaffolds have attracted significant interest as drug delivery vehicles. CaP systems, including both hydroxyapaptite and tricalcium phosphates, possess variable stoichiometry, functionality and dissolution properties which make them suitable for cellular delivery. Their chemical similarity to bone and thus biocompatibility, as well as variable surface charge density contribute to their controlled release properties. Among specific research areas, nanoparticle size, morphology, surface area due to porosity, and chemistry controlled release kinetics are the most active. This article discusses CaP systems in their particulate, cements, and scaffold forms for drug, protein, and growth factor delivery toward orthopedic and dental applications.

Image-guided navigation system for placing dental implants.

Science.gov (United States)

Casap, Nardy; Wexler, Alon; Lustmann, Joshua

2004-10-01

Navigation-guided surgery has recently been introduced into various surgical disciplines, including oral and maxillofacial surgery. Since the advent of dental implants, dental computed tomography (CT) scans have been used as a diagnostic tool for preoperative planning, but not as part of the surgical phase. This article explains the principles of computer-assisted surgery and describes the use of a computer-guided navigation system in dental implantology. The system uses preoperative dental CT scans for planning and as an integral part of the surgical procedure. This system allows continuous intraoperative coordination of the implantation phase with the preoperative plan, optimizing the accuracy of implant surgery. Deviations from the planned location of the implants are minimal. Several cases are discussed.

TRANSDERMAL DRUG DELIVERY SYSTEM: REVIEW

OpenAIRE

Vishvakarama Prabhakar; Agarwal Shivendra; Sharma Ritika; Saurabh Sharma

2012-01-01

Various new technologies have been developed for the transdermal delivery of some important drugs. Today about 74% of drugs are taken orally and are found not to be as effective as desired. To improve such characters transdermal drug delivery system was emerged. Drug delivery through the skin to achieve a systemic effect of a drug is commonly known as transdermal drug delivery and differs from traditional topical drug delivery. Transdermal drug delivery systems (TDDS) are dosage forms involve...

Practical implications of incentive systems are utilized by dental franchises.

Science.gov (United States)

Yavner, S B

1989-01-01

The success of any dental practice depends, among other factors, on the critical role of staff employees. In order to encourage desired staff behaviors, incentive systems can be designed for employee dentists, assistants/hygienists and managers. A survey of dental franchises was conducted in 1987 for the purpose of examining their incentive control systems. The specific incentives employed by these dental franchises for their employees are analyzed. The implications of these incentive systems used by dental franchise organizations for all dental practices are then discussed.

UAV Delivery Monitoring System

Directory of Open Access Journals (Sweden)

San Khin Thida

2018-01-01

Full Text Available UAV-based delivery systems are increasingly being used in the logistics field, particularly to achieve faster last-mile delivery. This study develops a UAV delivery system that manages delivery order assignments, autonomous flight operation, real time control for UAV flights, and delivery status tracking. To manage the delivery item assignments, we apply the concurrent scheduler approach with a genetic algorithm. The present paper describes real time flight data based on a micro air vehicle communication protocol (MAVLink. It also presents the detailed hardware components used for the field tests. Finally, we provide UAV component analysis to choose the suitable components for delivery in terms of battery capacity, flight time, payload weight and motor thrust ratio.

Peptide and protein delivery using new drug delivery systems.

Science.gov (United States)

Jain, Ashish; Jain, Aviral; Gulbake, Arvind; Shilpi, Satish; Hurkat, Pooja; Jain, Sanjay K

2013-01-01

Pharmaceutical and biotechnological research sorts protein drug delivery systems by importance based on their various therapeutic applications. The effective and potent action of the proteins/peptides makes them the drugs of choice for the treatment of numerous diseases. Major research issues in protein delivery include the stabilization of proteins in delivery devices and the design of appropriate target-specific protein carriers. Many efforts have been made for effective delivery of proteins/peptidal drugs through various routes of administrations for successful therapeutic effects. Nanoparticles made of biodegradable polymers such as poly lactic acid, polycaprolactone, poly(lactic-co-glycolic acid), the poly(fumaric-co-sebacic) anhydride chitosan, and modified chitosan, as well as solid lipids, have shown great potential in the delivery of proteins/peptidal drugs. Moreover, scientists also have used liposomes, PEGylated liposomes, niosomes, and aquasomes, among others, for peptidal drug delivery. They also have developed hydrogels and transdermal drug delivery systems for peptidal drug delivery. A receptor-mediated delivery system is another attractive strategy to overcome the limitation in drug absorption that enables the transcytosis of the protein across the epithelial barrier. Modification such as PEGnology is applied to various proteins and peptides of the desired protein and peptides also increases the circulating life, solubility and stability, pharmacokinetic properties, and antigenicity of protein. This review focuses on various approaches for effective protein/peptidal drug delivery, with special emphasis on insulin delivery.

Use of dental services among Danish youths

DEFF Research Database (Denmark)

Lissau, I; Holst, D; Friis-Hasché, E

1989-01-01

The purpose of the present study was to analyze the separate effect and the total effect of the social environment, the individual and the delivery system on frequency of use of dental services among youths. The variables of use were divided into the three main groups according to Coleman (12). I...

Advancing education in dental hygiene.

Science.gov (United States)

Battrell, Ann; Lynch, Ann; Steinbach, Pam; Bessner, Sue; Snyder, Josh; Majeski, Jean

2014-06-01

The changing health care environment and societal imperatives indicate the need for transformative change within the dental hygiene profession to serve the emerging needs of the public. The American Dental Hygienists' Association is leading the way toward meaningful change. The American Dental Hygienists' Association (ADHA) has as its vision the integration of dental hygienists into the health care delivery system as essential primary care providers to expand access to oral health care. This article provides data on current dental hygiene education programs and those in development. Also included is a discussion regarding how the dental hygiene profession can better serve the health and wellness needs of society by transforming the way graduates are prepared for the future. ADHA's dental hygiene survey center data, policies and a futuristic analysis plus a review of the professional literature describe the current state of dental hygiene education and the profession. A discussion of societal, health care and educational trends that creates the imperative for transformation of the dental hygiene profession is provided. Ultimately, the purpose of advancing education in dental hygiene is to achieve better oral and overall health for more people. The profession's responsibility to the public includes evaluating its own ability to provide care and taking the steps necessary to ensure its maximum effectiveness. ADHA is leading this process for dental hygienists in diverse ways. It is imperative that the dental hygiene profession understands and embraces the changing health care environment. Through open dialog and the sharing of evidence the professional path will be determined along with forward movement for the benefit of society and the dental hygiene profession. Copyright © 2014 Elsevier Inc. All rights reserved.

Chronic Cutaneous Draining Sinus of Dental Origin

African Journals Online (AJOL)

Endodontics, JSS Dental College and Hospital, Mysore, Karnataka, India. Abstract ... Keywords: Dental fistula, Localized drug delivery, Root canal treatment. Access this article ... combination of intra-canal irrigants was selected. Hypochlorite.

Project delivery system (PDS)

CERN Document Server

2001-01-01

As business environments become increasingly competitive, companies seek more comprehensive solutions to the delivery of their projects. "Project Delivery System: Fourth Edition" describes the process-driven project delivery systems which incorporates the best practices from Total Quality and is aligned with the Project Management Institute and ISO Quality Standards is the means by which projects are consistently and efficiently planned, executed and completed to the satisfaction of clients and customers.

Synthetic sustained gene delivery systems.

Science.gov (United States)

Agarwal, Ankit; Mallapragada, Surya K

2008-01-01

Gene therapy today is hampered by the need of a safe and efficient gene delivery system that can provide a sustained therapeutic effect without cytotoxicity or unwanted immune responses. Bolus gene delivery in solution results in the loss of delivered factors via lymphatic system and may cause undesired effects by the escape of bioactive molecules to distant sites. Controlled gene delivery systems, acting as localized depot of genes, provide an extended sustained release of genes, giving prolonged maintenance of the therapeutic level of encoded proteins. They also limit the DNA degradation in the nuclease rich extra-cellular environment. While attempts have been made to adapt existing controlled drug delivery technologies, more novel approaches are being investigated for controlled gene delivery. DNA encapsulated in nano/micro spheres of polymers have been administered systemically/orally to be taken up by the targeted tissues and provide sustained release once internalized. Alternatively, DNA entrapped in hydrogels or scaffolds have been injected/implanted in tissues/cavities as platforms for gene delivery. The present review examines these different modalities for sustained delivery of viral and non-viral gene-delivery vectors. Design parameters and release mechanisms of different systems made with synthetic or natural polymers are presented along with their prospective applications and opportunities for continuous development.

Colloidal drug delivery system: amplify the ocular delivery.

Science.gov (United States)

Ali, Javed; Fazil, Mohd; Qumbar, Mohd; Khan, Nazia; Ali, Asgar

2016-01-01

The ocular perceivers are the most voluntarily accessible organs in terms of location in the body, yet drug distribution to these tissues is one of the most intriguing and challenging endeavors and problematic to the pharmaceutical scientist. The most of ocular diseases are treated with topical application of conventional formulation, i.e. solutions, suspensions and ointment. Typically on installation of these conventional formulations, only <5% of the applied dose penetrates the cornea and reaches intraocular tissues, while a major fraction of the instilled dose is wastage due to the presence of many ocular barriers like external barriers, rapid loss of the instilled solution from the precorneal area and nasolacrimal drainage system. Systemic absorption caused systemic side effects varying from mild to life-threatening events. The main objective of this review is to explore the role of colloidal delivery of drug to minimize the drawbacks associated with them. This review provides an insight into the various constraints associated with ocular drug delivery, summarizes recent findings and applications of colloidal delivery systems, i.e. nanoparticles, nanosuspensions, liposomes, niosomes, dendrimers and contact lenses containing nanoparticles have the capacity to distribute ocular drugs to categorical target sites and hold promise to revolutionize the therapy of many ocular perceiver diseases and minimized the circumscription of conventional delivery. Form the basis of literature review, it has been found that the novel delivery system have greater impact to maximize ocular drug absorption, and minimize systemic absorption and side effects.

Real-time evaluation of two light delivery systems for photodynamic disinfection of Candida albicans biofilm in curved root canals.

Science.gov (United States)

Sabino, C P; Garcez, A S; Núñez, S C; Ribeiro, M S; Hamblin, M R

2015-08-01

Antimicrobial photodynamic therapy (APDT) combined with endodontic treatment has been recognized as an alternative approach to complement conventional root canal disinfection methods on bacterial biofilms. We developed an in  vitro model of bioluminescent Candida albicans biofilm inside curved dental root canals and investigated the microbial reduction produced when different light delivery methods are employed. Each light delivery method was evaluated in respect to the light distribution provided inside curved root canals. After conventional endodontic preparation, teeth were sterilized before canals were contaminated by a bioluminescent strain of C. albicans (CEC789). Methylene blue (90 μM) was introduced into the canals and then irradiated (λ = 660 nm, P = 100 mW, beam diameter = 2 mm) with laser tip either in contact with pulp chamber or within the canal using an optical diffuser fiber. Light distribution was evaluated by CCD camera, and microbial reduction was monitored through bioluminescence imaging. Our findings demonstrated that the bioluminescent C. albicans biofilm model had good reproducibility and uniformity. Light distribution in dental tissue was markedly dependent on the light delivery system, and this strategy was directly related to microbial destruction. Both light delivery systems performed significant fungal inactivation. However, when irradiation was performed with optical diffuser fiber, microbial burden reduction was nearly 100 times more effective. Bioluminescence is an interesting real-time analysis to endodontic C. albicans biofilm inactivation. APDT showed to be an effective way to inactivate C. albicans biofilms. Diffuser fibers provided optimized light distribution inside curved root canals and significantly increased APDT efficiency.

Survey on multisensory feedback virtual reality dental training systems.

Science.gov (United States)

Wang, D; Li, T; Zhang, Y; Hou, J

2016-11-01

Compared with traditional dental training methods, virtual reality training systems integrated with multisensory feedback possess potentials advantages. However, there exist many technical challenges in developing a satisfactory simulator. In this manuscript, we systematically survey several current dental training systems to identify the gaps between the capabilities of these systems and the clinical training requirements. After briefly summarising the components, functions and unique features of each system, we discuss the technical challenges behind these systems including the software, hardware and user evaluation methods. Finally, the clinical requirements of an ideal dental training system are proposed. Future research/development areas are identified based on an analysis of the gaps between current systems and clinical training requirements. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Preparing the Future Dental Hygiene Workforce: Knowledge, Skills, and Reform.

Science.gov (United States)

Fried, Jacquelyn L; Maxey, Hannah L; Battani, Kathryn; Gurenlian, JoAnn R; Byrd, Tammi O; Brunick, Ann

2017-09-01

With the health care delivery system in transition, the way in which oral health care services are delivered in 2040 will inevitably change. To achieve the aims of reduced cost, improved access, and higher quality and to advance population wellness, oral health care will likely become a more integrated part of medical care. An integrated primary care system would better meet the needs of an increasingly diverse and aging U.S. population with uneven access to health care services. By 2040, trends suggest that a smaller proportion of dental hygienists will work in traditional solo dental offices; many more will practice with multidisciplinary health care teams in large-group dental and medical practices and in a variety of non-traditional community settings. This integration will require changes in how dental hygienists are educated. To shape the skill sets, clinical judgment, and knowledge of future practitioners, current dental hygiene curricula must be reexamined, redirected, and enhanced. This article examines some of the factors that are likely to shape the future of dental hygiene practice, considers the strengths and weaknesses of current curricula, and proposes educational changes to prepare dental hygienists for practice in 2040. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Self-nanoemulsifying drug delivery systems for oral insulin delivery

DEFF Research Database (Denmark)

Li, Ping; Tan, Angel; Prestidge, Clive A

2014-01-01

This study aims at evaluating the combination of self-nanoemulsifying drug delivery systems (SNEDDS) and enteric-coated capsules as a potential delivery strategy for oral delivery of insulin. The SNEDDS preconcentrates, loaded with insulin-phospholipid complex at different levels (0, 2.5 and 10% w...

Teaching with technology: learning outcomes for a combined dental and dental hygiene online hybrid oral histology course.

Science.gov (United States)

Gadbury-Amyot, Cynthia C; Singh, Amul H; Overman, Pamela R

2013-06-01

Among the challenges leaders in dental and allied dental education have faced in recent years is a shortage of well-qualified faculty members, especially in some specialty areas of dentistry. One proposed solution has been the use of technology. At the University of Missouri-Kansas City School of Dentistry, the departure of a faculty member who taught the highly specialized content in oral histology and embryology provided the opportunity to implement distance delivery of that course. The course is taught once a year to a combined group of dental and dental hygiene students. Previous to spring semester of 2009, the course was taught using traditional face-to-face, in-class lectures and multiple-choice examinations. During the spring semesters of 2009, 2010, and 2011, the course was taught using synchronous and asynchronous distance delivery technology. Outcomes for these courses (including course grades and performance on the National Board Dental Examination Part I) were compared to those from the 2006, 2007, and 2008 courses. Students participating in the online hybrid course were also given an author-designed survey, and the perceptions of the faculty member who made the transition from teaching the course in a traditional face-to-face format to teaching in an online hybrid format were solicited. Overall, student and faculty perceptions and student outcomes and course reviews have been positive. The results of this study can provide guidance to those seeking to use technology as one method of curricular delivery.

The business of dental practice

Directory of Open Access Journals (Sweden)

Niken Widyanti Sriyono

2006-06-01

Full Text Available Globalization including General Agreement on Trade in Services (GATS and Asia Fair Trade Agreement (AFTA are a new free trade system. In globalization era, there will be an intense and free competition in looking for jobs throughout the world. This new system will affect the health services system in which health services tend to follow an industrial model. Meaning that dentistry or dental health services tend to be part of a business system, and this system has caused controversy among the community and the profession itself. The results of the discussion revealed that professional and business of dentistry is compatible and complementary. The tendency of increasing number of legal form of practice (group and a professional corporation and the worldwide advertisement of these practices supported the premise that delivering dental practice tends to follow the industrial model. Dentists should not only more focus on achieving financial success in running the business of practice but profession should have the most concern for the people who seek their services. Delivering quality of dental care depends on the high skill of the dentist and on the satisfactory income for the survival of the practice in the long run, and this make the practice will be viewed by the public and profession as being appropriate and of high quality. Facing the globalization, besides possessing high clinical skill, dentists must have a firm understanding of management concepts and apply them in their practice. In conclusion: The profession and the business of dentistry are compatible and complementary. The delivery of the dental services tends to follow the industrial model, which is a current reality. Dentist should concern more on the delivering high quality of dental services, not only focus on the business of the practice, although the satisfactory income is important for the survival growth of the practice in the long run. It is suggested for dentists to follow as

The Doctoral Degree in Dental Hygiene: Creating New Oral Healthcare Paradigms.

Science.gov (United States)

Gurenlian, JoAnn R; Rogo, Ellen J; Spolarich, Ann Eshenaur

2016-06-01

Doctoral dental hygiene education would prepare scholars and leaders to improve population health through changes in oral health policy and delivery. Discussions about doctoral education in dental hygiene have centered on the need to create a cadre of dental hygiene researchers and scholars who will expand the body of knowledge for the profession. It has been proposed that scholars are needed to lead the development of theory and disseminate knowledge unique to the discipline of dental hygiene. Transformation to doctoral education is not a new trend as many other health care disciplines have already implemented curricular models, establishing the doctoral degree for entry level into practice. The Institute of Medicine has called for the exploration of new models for care delivery. Dental hygienists need to be prepared with leadership skills enabling them to participate and lead interprofessional teams and develop policies designed to improve the delivery of oral health care services to enhance population health. Current educational models do not adequately prepare dental hygienists to serve in this capacity. The purpose of this article is to present 2 models of doctoral education for dental hygiene that will illustrate how dental hygienists can be better prepared as scholars and leaders for the profession. These proposed models of doctoral education in dental hygiene present a paradigm shift in dental hygiene education. As with other disciplines that have evolved, both academically and professionally, dental hygiene will be positioned to achieve the hallmark of professional status with this terminal degree. Copyright © 2016 Elsevier Inc. All rights reserved.

Ergonomic design for dental offices.

Science.gov (United States)

Ahearn, David J; Sanders, Martha J; Turcotte, Claudia

2010-01-01

The increasing complexity of the dental office environment influences productivity and workflow for dental clinicians. Advances in technology, and with it the range of products needed to provide services, have led to sprawl in operatory setups and the potential for awkward postures for dental clinicians during the delivery of oral health services. Although ergonomics often addresses the prevention of musculoskeletal disorders for specific populations of workers, concepts of workflow and productivity are integral to improved practice in work environments. This article provides suggestions for improving workflow and productivity for dental clinicians. The article applies ergonomic principles to dental practice issues such as equipment and supply management, office design, and workflow management. Implications for improved ergonomic processes and future research are explored.

Automated dental identification system: An aid to forensic odontology

Directory of Open Access Journals (Sweden)

Parvathi Devi

2011-01-01

Full Text Available Automated dental identification system is computer-aided software for the postmortem identification of deceased individuals based on dental characteristics specifically radiographs. This system is receiving increased attention because of the large number of victims encountered in the mass disasters and it is 90% more time saving and accurate than the conventional radiographic methods. This technique is based on the intensity of the overall region of tooth image and therefore it does not necessitate the presence of sharp boundary between the teeth. It provides automated search and matching capabilities for digitized radiographs and photographic dental images and compares the teeth present in multiple digitized dental records in order to access their similarity. This paper highlights the functionality of its components and techniques used in realizing these components.

Preparing and evaluating delivery systems for proteins

DEFF Research Database (Denmark)

Jorgensen, L; Moeller, E H; van de Weert, M

2006-01-01

From a formulation perspective proteins are complex and therefore challenging molecules to develop drug delivery systems for. The success of a formulation depends on the ability of the protein to maintain the native structure and activity during preparation and delivery as well as during shipping...... and long-term storage of the formulation. Therefore, the development and evaluation of successful and promising drug delivery systems is essential. In the present review, some of the particulate drug delivery systems for parenteral delivery of protein are presented and discussed. The challenge...... for incorporation of protein in particulate delivery systems is exemplified by water-in-oil emulsions....

Advanced Networks in Dental Rich Online MEDiA (ANDROMEDA)

Science.gov (United States)

Elson, Bruce; Reynolds, Patricia; Amini, Ardavan; Burke, Ezra; Chapman, Craig

There is growing demand for dental education and training not only in terms of knowledge but also skills. This demand is driven by continuing professional development requirements in the more developed economies, personnel shortages and skills differences across the European Union (EU) accession states and more generally in the developing world. There is an excellent opportunity for the EU to meet this demand by developing an innovative online flexible learning platform (FLP). Current clinical online systems are restricted to the delivery of general, knowledge-based training with no easy method of personalization or delivery of skill-based training. The PHANTOM project, headed by Kings College London is developing haptic-based virtual reality training systems for clinical dental training. ANDROMEDA seeks to build on this and establish a Flexible Learning Platform that can integrate the haptic and sensor based training with rich media knowledge transfer, whilst using sophisticated technologies such as including service-orientated architecture (SOA), Semantic Web technologies, knowledge-based engineering, business intelligence (BI) and virtual worlds for personalization.

A community participatory model of mobile dental service-survey among stakeholders

Directory of Open Access Journals (Sweden)

Biney Anne Thomas

2015-01-01

Full Text Available Background: The mobile dental service (MDS at Ludhiana is a unique model of oral health care delivery which enables rural communities to develop their own creative system through partnerships, for ensuring consistent oral health care delivery in the underserved areas. Objectives: The objective of this study was to assess the satisfaction among the stakeholders participating in the MDS program of a premier Dental College in Ludhiana. Methodology: A cross-sectional survey was conducted in 12 villages of Ludhiana district in Punjab where the MDSs were being provided. Four hundred and fifty patients, 50 organizers and 40 service providers were interviewed separately with pretested questionnaires. Results: About 98.4% of the patients were completely satisfied with the overall care provided. 71.1% of the patients felt there was increased times in services and 76.7% felt that there was inadequate referral network. Most patients were satisfied with the communication skills of the doctors. 57.5% of the organizers felt that the overall care provided in the MDSs was consistently good and high quality in spite of challenging infrastructure. 100% of the health care providers felt that working in the MDS was a good learning experience in spite of the heavy workload and infrastructure challenges. Conclusion: The study reveals that the MDS is a satisfactory mode of dental care delivery for all the stakeholders involved. Despite the challenges, this partnership program can be nurtured as a successful model of oral health care delivery in underserved areas.

Health Hazard Evaluation Report HETA 84-204-1600, Dental Health Associates, Paoli, Pennsylvania. [Nitrous oxide

Energy Technology Data Exchange (ETDEWEB)

Crandall, M.S.

1985-06-01

Area air and breathing-zone samples were analyzed for nitrous oxide at Dental Health Associates, Paoli, Pennsylvania on August 2, 1984. The evaluation was requested by a dental assistant because of general concern about the extent of nitrous oxide exposure, especially since the office was not equipped with a waste-anesthetic gas-scavenging system. The author recommends installing a waste anesthetic gas scavenging system with a dedicated exhaust. The nitrous oxide delivery and mixing system should be checked for leaks monthly and work practices for handling nitrous oxide should be improved.

A dose monitoring system for dental radiography

Energy Technology Data Exchange (ETDEWEB)

Lee, Chena; Lee, Sam Sun; Kim, Jo Eun; Huh, Kyung Hoe; Yi, Woo Jin; Heo, Min Suk; Choi, Soon Chul [Dept. of Oral and Maxillofacial Radiology and Dental Research Institute, School of Dentistry, Seoul National University, Seoul (Korea, Republic of); Symkhampha, Khanthaly [Dept. of Oral and Maxillofacial Radiology, Department of Basic Science, Faculty of Dentistry, University of Health Sciences, Vientiane (Lao People' s Democratic Republic); Lee, Woo Jin [Dept. of Interdisciplinary Program in Radiation, Applied Life Sciences Major, College of Medicine, BK21, and Dental Research Institute, Seoul National University, Seoul (Korea, Republic of); Yeom, Heon Young [School of Computer Science Engineering, Seoul National University, Seoul (Korea, Republic of)

2016-06-15

The current study investigates the feasibility of a platform for a nationwide dose monitoring system for dental radiography. The essential elements for an unerring system are also assessed. An intraoral radiographic machine with 14 X-ray generators and five sensors, 45 panoramic radiographic machines, and 23 cone-beam computed tomography (CBCT) models used in Korean dental clinics were surveyed to investigate the type of dose report. A main server for storing the dose data from each radiographic machine was prepared. The dose report transfer pathways from the radiographic machine to the main sever were constructed. An effective dose calculation method was created based on the machine specifications and the exposure parameters of three intraoral radiographic machines, five panoramic radiographic machines, and four CBCTs. A viewing system was developed for both dentists and patients to view the calculated effective dose. Each procedure and the main server were integrated into one system. The dose data from each type of radiographic machine was successfully transferred to the main server and converted into an effective dose. The effective dose stored in the main server is automatically connected to a viewing program for dentist and patient access. A patient radiation dose monitoring system is feasible for dental clinics. Future research in cooperation with clinicians, industry, and radiologists is needed to ensure format convertibility for an efficient dose monitoring system to monitor unexpected radiation dose.

A dose monitoring system for dental radiography

International Nuclear Information System (INIS)

Lee, Chena; Lee, Sam Sun; Kim, Jo Eun; Huh, Kyung Hoe; Yi, Woo Jin; Heo, Min Suk; Choi, Soon Chul; Symkhampha, Khanthaly; Lee, Woo Jin; Yeom, Heon Young

2016-01-01

The current study investigates the feasibility of a platform for a nationwide dose monitoring system for dental radiography. The essential elements for an unerring system are also assessed. An intraoral radiographic machine with 14 X-ray generators and five sensors, 45 panoramic radiographic machines, and 23 cone-beam computed tomography (CBCT) models used in Korean dental clinics were surveyed to investigate the type of dose report. A main server for storing the dose data from each radiographic machine was prepared. The dose report transfer pathways from the radiographic machine to the main sever were constructed. An effective dose calculation method was created based on the machine specifications and the exposure parameters of three intraoral radiographic machines, five panoramic radiographic machines, and four CBCTs. A viewing system was developed for both dentists and patients to view the calculated effective dose. Each procedure and the main server were integrated into one system. The dose data from each type of radiographic machine was successfully transferred to the main server and converted into an effective dose. The effective dose stored in the main server is automatically connected to a viewing program for dentist and patient access. A patient radiation dose monitoring system is feasible for dental clinics. Future research in cooperation with clinicians, industry, and radiologists is needed to ensure format convertibility for an efficient dose monitoring system to monitor unexpected radiation dose

A Systems Approach to Nitrogen Delivery

Energy Technology Data Exchange (ETDEWEB)

Goins, Bobby [Y-12 National Security Complex, Oak Ridge, TN (United States)

2017-10-23

A systems based approach will be used to evaluate the nitrogen delivery process. This approach involves principles found in Lean, Reliability, Systems Thinking, and Requirements. This unique combination of principles and thought process yields a very in depth look into the system to which it is applied. By applying a systems based approach to the nitrogen delivery process there should be improvements in cycle time, efficiency, and a reduction in the required number of personnel needed to sustain the delivery process. This will in turn reduce the amount of demurrage charges that the site incurs. In addition there should be less frustration associated with the delivery process.

A Systems Approach to Nitrogen Delivery

Energy Technology Data Exchange (ETDEWEB)

Goins, Bobby [Y-12 National Security Complex, Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States)

2017-10-17

A systems based approach will be used to evaluate the nitrogen delivery process. This approach involves principles found in Lean, Reliability, Systems Thinking, and Requirements. This unique combination of principles and thought process yields a very in depth look into the system to which it is applied. By applying a systems based approach to the nitrogen delivery process there should be improvements in cycle time, efficiency, and a reduction in the required number of personnel needed to sustain the delivery process. This will in turn reduce the amount of demurrage charges that the site incurs. In addition there should be less frustration associated with the delivery process.

Fund allocation within Australian dental care: an innovative approach to output based funding.

Science.gov (United States)

Tennant, M; Carrello, C; Kruger, E

2005-12-01

Over the last 15 years in Australia the process of funding government health care has changed significantly. The development of dental funding models that transparently meet both the service delivery needs for data at the treatment level and policy makers' need for health condition data is critical to the continued integration of dentistry into the wider health system. This paper presents a model of fund allocation that provides a communication construct that addresses the needs of both policy makers and service providers. In this model, dental treatments (dental item numbers) have been grouped into eight broad dental health conditions. Within each dental health condition, a weighted average price is determined using the Department of Veterans Affairs' (DVA) fee schedule as the benchmark, adjusted for the mix of care. The model also adjusts for the efficiency differences between sectors providing government funded dental care. In summary, the price to be applied to a dental health condition category is determined by the weighted average DVA price adjusted by the sector efficiency. This model allows governments and dental service providers to develop funding agreements that both quantify and justify the treatment to be provided. Such a process facilitates the continued integration of dental care into the wider health system.

STRATEGIES AND PROSPECTS OF NASAL DRUG DELIVERY SYSTEMS

OpenAIRE

Gannu Praveen Kumar

2012-01-01

The recent advancement of nasal drug delivery systems has increased enormously and is gaining significant importance. Intranasal therapy has been an accepted form of treatment in the Ayurvedic system of Indian Medicine. The non-invasive delivery of nasal drug delivery systems made to exploit for the development of successful treatment. The advantages, disadvantages, mechanism of action and application of nasal drug delivery system in local delivery, systematic delivery, nasal vaccines and CNS...

Fiber coupled optical spark delivery system

Science.gov (United States)

Yalin, Azer; Willson, Bryan; Defoort, Morgan

2008-08-12

A spark delivery system for generating a spark using a laser beam is provided, the spark delivery system including a laser light source and a laser delivery assembly. The laser delivery assembly includes a hollow fiber and a launch assembly comprising launch focusing optics to input the laser beam in the hollow fiber. In addition, the laser delivery assembly includes exit focusing optics that demagnify an exit beam of laser light from the hollow fiber, thereby increasing the intensity of the laser beam and creating a spark. In accordance with embodiments of the present invention, the assembly may be used to create a spark in a combustion engine. In accordance with other embodiments of the present invention, a method of using the spark delivery system is provided. In addition, a method of choosing an appropriate fiber for creating a spark using a laser beam is also presented.

Sterile Product Packaging and Delivery Systems.

Science.gov (United States)

Akers, Michael J

2015-01-01

Both conventional and more advanced product container and delivery systems are the focus of this brief article. Six different product container systems will be discussed, plus advances in primary packaging for special delivery systems and needle technology.

Reduction of treatment delivery variances with a computer-controlled treatment delivery system

International Nuclear Information System (INIS)

Fraass, B.A.; Lash, K.L.; Matrone, G.M.; Lichter, A.S.

1997-01-01

Purpose: To analyze treatment delivery variances for 3-D conformal therapy performed at various levels of treatment delivery automation, ranging from manual field setup to virtually complete computer-controlled treatment delivery using a computer-controlled conformal radiotherapy system. Materials and Methods: All external beam treatments performed in our department during six months of 1996 were analyzed to study treatment delivery variances versus treatment complexity. Treatments for 505 patients (40,641 individual treatment ports) on four treatment machines were studied. All treatment variances noted by treatment therapists or quality assurance reviews (39 in all) were analyzed. Machines 'M1' (CLinac (6(100))) and 'M2' (CLinac 1800) were operated in a standard manual setup mode, with no record and verify system (R/V). Machines 'M3' (CLinac 2100CD/MLC) and ''M4'' (MM50 racetrack microtron system with MLC) treated patients under the control of a computer-controlled conformal radiotherapy system (CCRS) which 1) downloads the treatment delivery plan from the planning system, 2) performs some (or all) of the machine set-up and treatment delivery for each field, 3) monitors treatment delivery, 4) records all treatment parameters, and 5) notes exceptions to the electronically-prescribed plan. Complete external computer control is not available on M3, so it uses as many CCRS features as possible, while M4 operates completely under CCRS control and performs semi-automated and automated multi-segment intensity modulated treatments. Analysis of treatment complexity was based on numbers of fields, individual segments (ports), non-axial and non-coplanar plans, multi-segment intensity modulation, and pseudo-isocentric treatments (and other plans with computer-controlled table motions). Treatment delivery time was obtained from the computerized scheduling system (for manual treatments) or from CCRS system logs. Treatment therapists rotate among the machines, so this analysis

MINI-SLAR delivery system

International Nuclear Information System (INIS)

Alstein, D.

1996-01-01

In the Spring of 1993, a need to complete Spacer Location and Repositioning (SLAR) on the Bruce 'A', Unit 1 Reactor was identified. An alternate SLAR delivery system was required due to conversion constraints that prevented the existing Bruce SLAR System from being used in Unit 1. A Portable SLAR Delivery System called MINI-SLAR Delivery System was developed, designed and fabricated in a 14 month period, then used to successfully SLAR 109 channels. The system is a portable remotely operated Nuclear Class 1 registered fitting that is independent of the Fuelling Machine, allowing the station to continue normal Fuelling and Maintenance activities. It is designed to a Level 'D' faulted condition of HPECI Pressure thus minimizing PHT Heat Sink configuration requirements and minimizing outage set-up times. The system is based on a modular design allowing for easy fabrication, assembly and repair. It consists of a Snout Assembly, a Closure Plug Assembly, Shield Plug Assembly, SLAR Ram assembly, Work Table Assembly and Control Panel. Controls are through a Programmable Logic Controller with software tested and certified to a Software Quality Assurance of Level Ill. (author). 2 refs., 2 figs

MINI-SLAR delivery system

Energy Technology Data Exchange (ETDEWEB)

Alstein, D [Ontario Hydro, Tiverton, ON (Canada). Bruce Nuclear Generating Station-A; Dalton, K [Spectrum Engineering, Peterborough, ON (Canada)

1997-12-31

In the Spring of 1993, a need to complete Spacer Location and Repositioning (SLAR) on the Bruce `A`, Unit 1 Reactor was identified. An alternate SLAR delivery system was required due to conversion constraints that prevented the existing Bruce SLAR System from being used in Unit 1. A Portable SLAR Delivery System called MINI-SLAR Delivery System was developed, designed and fabricated in a 14 month period, then used to successfully SLAR 109 channels. The system is a portable remotely operated Nuclear Class 1 registered fitting that is independent of the Fuelling Machine, allowing the station to continue normal Fuelling and Maintenance activities. It is designed to a Level `D` faulted condition of HPECI Pressure thus minimizing PHT Heat Sink configuration requirements and minimizing outage set-up times. The system is based on a modular design allowing for easy fabrication, assembly and repair. It consists of a Snout Assembly, a Closure Plug Assembly, Shield Plug Assembly, SLAR Ram assembly, Work Table Assembly and Control Panel. Controls are through a Programmable Logic Controller with software tested and certified to a Software Quality Assurance of Level Ill. (author). 2 refs., 2 figs.

Emerging Models of Dental Practice Aim at Addressing Needs of the Aged.

Science.gov (United States)

Catalanotto, Frank; Koppelman, Jane; Haber, Judith

2017-10-01

Currently, about 46 million seniors, citizens over the age of 65, live in the United States. That number is expected to roughly double to more than 98 million by 2060, an increase from the current 15% of the population to 24%. Seniors are living longer and, due to advances in dental care and access to fluoridated water, keeping more of their teeth. As a result, many will be seeking to access services through a dental care delivery system that is already struggling to meet existing need. This article will describe emerging oral health workforce models, as well as interprofessional team approaches, that may help improve access to the growing population of senior citizens. The article will include discussions on dental therapists, dental hygienists, physicians, nurses, and physician assistants.

Health care delivery systems.

NARCIS (Netherlands)

Stevens, F.; Zee, J. van der

2007-01-01

A health care delivery system is the organized response of a society to the health problems of its inhabitants. Societies choose from alternative health care delivery models and, in doing so, they organize and set goals and priorities in such a way that the actions of different actors are effective,

Designing and assessing a sustainable networked delivery (SND) system: hybrid business-to-consumer book delivery case study.

Science.gov (United States)

Kim, Junbeum; Xu, Ming; Kahhat, Ramzy; Allenby, Braden; Williams, Eric

2009-01-01

We attempted to design and assess an example of a sustainable networked delivery (SND) system: a hybrid business-to-consumer book delivery system. This system is intended to reduce costs, achieve significant reductions in energy consumption, and reduce environmental emissions of critical local pollutants and greenhouse gases. The energy consumption and concomitant emissions of this delivery system compared with existing alternative delivery systems were estimated. We found that regarding energy consumption, an emerging hybrid delivery system which is a sustainable networked delivery system (SND) would consume 47 and 7 times less than the traditional networked delivery system (TND) and e-commerce networked delivery system (END). Regarding concomitant emissions, in the case of CO2, the SND system produced 32 and 7 times fewer emissions than the TND and END systems. Also the SND system offer meaningful economic benefit such as the costs of delivery and packaging, to the online retailer, grocery, and consumer. Our research results show that the SND system has a lot of possibilities to save local transportation energy consumption and delivery costs, and reduce environmental emissions in delivery system.

Reimbursing Dentists for Smoking Cessation Treatment: Views From Dental Insurers

Science.gov (United States)

Wright, Shana; McNeely, Jennifer; Rotrosen, John; Winitzer, Rebecca F.; Pollack, Harold; Abel, Stephen; Metsch, Lisa

2012-01-01

Introduction: Screening and delivery of evidence-based interventions by dentists is an effective way to reduce tobacco use. However, dental visits remain an underutilized opportunity for the treatment of tobacco dependence. This is, in part, because the current reimbursement structure does not support expansion of dental providers’ role in this arena. The purpose of this study was to interview dental insurers to assess attitudes toward tobacco use treatment in dental practice, pros and cons of offering dental provider reimbursement, and barriers to instituting a tobacco use treatment-related payment policy for dental providers. Methods: Semi-structured interviews were conducted with 11 dental insurance company executives. Participants were identified using a targeted sampling method and represented viewpoints from a significant share of companies within the dental insurance industry. Results: All insurers believed that screening and intervention for tobacco use was an appropriate part of routine care during a dental visit. Several indicated a need for more evidence of clinical and cost-effectiveness before reimbursement for these services could be actualized. Lack of purchaser demand, questionable returns on investment, and segregation of the medical and dental insurance markets were cited as additional barriers to coverage. Conclusions: Dissemination of findings on efficacy and additional research on financial returns could help to promote uptake of coverage by insurers. Wider issues of integration between dental and medical care and payment systems must be addressed in order to expand opportunities for preventive services in dental care settings. PMID:22387994

Bacterial viability and physical properties of antibacterially modified experimental dental resin composites.

Directory of Open Access Journals (Sweden)

Stefan Rüttermann

Full Text Available PURPOSE: To investigate the antibacterial effect and the effect on the material properties of a novel delivery system with Irgasan as active agent and methacrylated polymerizable Irgasan when added to experimental dental resin composites. MATERIALS AND METHODS: A delivery system based on novel polymeric hollow beads, loaded with Irgasan and methacrylated polymerizable Irgasan as active agents were used to manufacture three commonly formulated experimental resin composites. The non-modified resin was used as standard (ST. Material A contained the delivery system providing 4 % (m/m Irgasan, material B contained 4 % (m/m methacrylated Irgasan and material C 8 % (m/m methacrylated Irgasan. Flexural strength (FS, flexural modulus (FM, water sorption (WS, solubility (SL, surface roughness Ra, polymerization shrinkage, contact angle Θ, total surface free energy γS and its apolar γS (LW, polar γS (AB, Lewis acid γS (+and base γS (- term as well as bacterial viability were determined. Significance was p < 0.05. RESULTS: The materials A to C were not unacceptably influenced by the modifications and achieved the minimum values for FS, WS and SL as requested by EN ISO 4049 and did not differ from ST what was also found for Ra. Only A had lower FM than ST. Θ of A and C was higher and γS (AB of A and B was lower than of ST. Materials A to C had higher γS (+ than ST. The antibacterial effect of materials A to C was significantly increased when compared with ST meaning that significantly less vital cells were found. CONCLUSION: Dental resin composites with small quantities of a novel antibacterially doped delivery system or with an antibacterial monomer provided acceptable physical properties and good antibacterial effectiveness. The sorption material being part of the delivery system can be used as a vehicle for any other active agent.

Some Recent Advances in Transdermal Drug Delivery Systems ...

African Journals Online (AJOL)

Some Recent Advances in Transdermal Drug Delivery Systems. ... Advances in Transdermal Drug Delivery Systems. EC Ibezim, B Kabele-Toge, CO Anie, C Njoku. Abstract. Transdermal delivery systems are forms of drug delivery involving the dermis, as distinct from topical, oral or other forms of parenteral dosage forms.

Drug delivery systems with modified release for systemic and biophase bioavailability.

Science.gov (United States)

Leucuta, Sorin E

2012-11-01

This review describes the most important new generations of pharmaceutical systems: medicines with extended release, controlled release pharmaceutical systems, pharmaceutical systems for the targeted delivery of drug substances. The latest advances and approaches for delivering small molecular weight drugs and other biologically active agents such as proteins and nucleic acids require novel delivery technologies, the success of a drug being many times dependent on the delivery method. All these dosage forms are qualitatively superior to medicines with immediate release, in that they ensure optimal drug concentrations depending on specific demands of different disease particularities of the body. Drug delivery of these pharmaceutical formulations has the benefit of improving product efficacy and safety, as well as patient convenience and compliance. This paper describes the biopharmaceutical, pharmacokinetic, pharmacologic and technological principles in the design of drug delivery systems with modified release as well as the formulation criteria of prolonged and controlled release drug delivery systems. The paper presents pharmaceutical prolonged and controlled release dosage forms intended for different routes of administration: oral, ocular, transdermal, parenteral, pulmonary, mucoadhesive, but also orally fast dissolving tablets, gastroretentive drug delivery systems, colon-specific drug delivery systems, pulsatile drug delivery systems and carrier or ligand mediated transport for site specific or receptor drug targeting. Specific technologies are given on the dosage forms with modified release as well as examples of marketed products, and current research in these areas.

Future of Automated Insulin Delivery Systems.

Science.gov (United States)

Castle, Jessica R; DeVries, J Hans; Kovatchev, Boris

2017-06-01

Advances in continuous glucose monitoring (CGM) have brought on a paradigm shift in the management of type 1 diabetes. These advances have enabled the automation of insulin delivery, where an algorithm determines the insulin delivery rate in response to the CGM values. There are multiple automated insulin delivery (AID) systems in development. A system that automates basal insulin delivery has already received Food and Drug Administration approval, and more systems are likely to follow. As the field of AID matures, future systems may incorporate additional hormones and/or multiple inputs, such as activity level. All AID systems are impacted by CGM accuracy and future CGM devices must be shown to be sufficiently accurate to be safely incorporated into AID. In this article, we summarize recent achievements in AID development, with a special emphasis on CGM sensor performance, and discuss the future of AID systems from the point of view of their input-output characteristics, form factor, and adaptability.

Quality control procedures of dental diagnostic radiology systems

International Nuclear Information System (INIS)

Andrade, Paula Serra Sasaki

2007-01-01

This work presents quality control reference procedures for dental diagnostic radiology systems, following the recommendations of the Publication 453 of the Brazilian Health Ministry (PF453), to be applied in dental clinics, in order to achieve an improvement in the radiological image qualities and the patient dose reduction. All tests were applied in an intraoral X rays system, following the methodology developed and the requirements of the PF 453. In order to verify the best quality of the image in relation to the smaller exposition time an object test was also developed in this work. The use of this object allowed the reduction of the exposition time of 0.5 seconds, the maximum value of the linear region of the characteristic curve, for 0.2 seconds. The tested X rays system showed a very good agreement with the applied procedures, detaching the reduction of the skin entrance dose using the film-holding devices. However, the size of the field increased and exceeded the maximum value of 6 cm recommended in the standard. The importance of the quality control in dental diagnostic radiology systems is essential due to the constant use of X radiation in dental clinics. The PF453 recommends the frequency of at least two years for the constancy tests. However, it is suggested that the professional, surgeon-dentist, should be responsible for the internal control of the image quality obtained from the X rays device. This can be done through monthly exposures of the object test developed in this work. (author)

Future Organization of Oral Health Services Delivery: From 2012 to 2042.

Science.gov (United States)

Brown, L Jackson

2017-09-01

The United States is currently experiencing a vortex of change in both general health and oral health care delivery, the ultimate outcome of which is still not well understood. The specific focus of this article is to examine the future organization of the oral health services delivery system (OHSDS) in the U.S., with special attention given to the role of large group dental practices (LGDPs) in that future. The article describes the various types of LGDPs and their ability to change the economic characteristics of the OHSDS. Large geographically distributed corporate group dental practices (LGDCGDPs) are the type that may expand their market share to the extent that they could change the economic characteristics of the OHSDS. A wide range of scenarios is used to project the expansion of LGDCGDPs into the future. The scenarios modeled are not intended as predictions but rather to present a range of possible OHSDS market structures that may emerge over the next 30 years. The implications of each scenario for the economic competition within the OHSDS are described. Possible implications of these trends for dental education are also discussed. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Communications data delivery system analysis task 2 report : high-level options for secure communications data delivery systems.

Science.gov (United States)

2012-05-16

This Communications Data Delivery System Analysis Task 2 report describes and analyzes options for Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I) communications data delivery systems using various communication media (Dedicated Short Ra...

Phantom-based interactive simulation system for dental treatment training.

Science.gov (United States)

Sae-Kee, Bundit; Riener, Robert; Frey, Martin; Pröll, Thomas; Burgkart, Rainer

2004-01-01

In this paper, we propose a new interactive simulation system for dental treatment training. The system comprises a virtual reality environment and a force-torque measuring device to enhance the capabilities of a passive phantom of tooth anatomy in dental treatment training processes. The measuring device is connected to the phantom, and provides essential input data for generating the graphic animations of physical behaviors such as drilling and bleeding. The animation methods of those physical behaviors are also presented. This system is not only able to enhance interactivity and accessibility of the training system compared to conventional methods but it also provides possibilities of recording, evaluating, and verifying the training results.

Levodopa delivery systems: advancements in delivery of the gold standard.

Science.gov (United States)

Ngwuluka, Ndidi; Pillay, Viness; Du Toit, Lisa C; Ndesendo, Valence; Choonara, Yahya; Modi, Girish; Naidoo, Dinesh

2010-02-01

Despite the fact that Parkinson's disease (PD) was discovered almost 200 years ago, its treatment and management remain immense challenges because progressive loss of dopaminergic nigral neurons, motor complications experienced by the patients as the disease progresses and drawbacks of pharmacotherapeutic management still persist. Various therapeutic agents have been used in the management of PD, including levodopa (l-DOPA), selegiline, amantadine, bromocriptine, entacapone, pramipexole dihydrochloride and more recently istradefylline and rasagiline. Of all agents, l-DOPA although the oldest, remains the most effective. l-DOPA is easier to administer, better tolerated, less expensive and is required by almost all PD patients. However, l-DOPA's efficacy in advanced PD is significantly reduced due to metabolism, subsequent low bioavailability and irregular fluctuations in its plasma levels. Significant strides have been made to improve the delivery of l-DOPA in order to enhance its bioavailability and reduce plasma fluctuations as well as motor complications experienced by patients purportedly resulting from pulsatile stimulation of the striatal dopamine receptors. Drug delivery systems that have been instituted for the delivery of l-DOPA include immediate release formulations, liquid formulations, dispersible tablets, controlled release formulations, dual-release formulations, microspheres, infusion and transdermal delivery, among others. In this review, the l-DOPA-loaded drug delivery systems developed over the past three decades are elaborated. The ultimate aim was to assess critically the attempts made thus far directed at improving l-DOPA absorption, bioavailability and maintenance of constant plasma concentrations, including the drug delivery technologies implicated. This review highlights the fact that neuropharmaceutics is at a precipice, which is expected to spur investigators to take that leap to enable the generation of innovative delivery systems for the

Dental Hygiene Curriculum Model for Transition to Future Roles.

Science.gov (United States)

Paarmann, Carlene S.; And Others

1990-01-01

The establishment of the baccalaureate degree as the minimum entry level for dental hygiene practice centers around three main concerns: changes in health care delivery, awarding of a degree commensurate with students' educational background, and the credibility of dental hygiene as a profession. A curriculum model is discussed. (MLW)

Laser welding by dental Nd:YAG device

Science.gov (United States)

Fornaini, Carlo; Bertrand, Caroline; Merigo, Elisabetta; Bonanini, Mauro; Rocca, Jean-Paul; Nammour, Samir

2009-06-01

Welding laser was introduced in jewellery during years 70 and, just after, was successfully used also by dental technicians. Welding laser gives a great number of advantages, versus traditional welding and, for this reason, this procedure had a great diffusion in the technician laboratories and stimulated the companies to put in the market more and more evolutes appliances. Some aspects, such great dimensions, high costs and delivery system today still characterize these machines by fixed lenses, which have strictly limited its use only to technician laboratories. The aim of this study is to demonstrate the possibility, by using a fibber-delivered laser normally utilized in the dental office, to make, by dentist himself in his office, welding on different metals and to evaluate advantages and possibilities of this new technique.

Danish dental education:

DEFF Research Database (Denmark)

Moore, Rod

1985-01-01

The effects of Danish cultural traditions on dental education in Denmark are described, as well as the system's current structure and developing issues. Some Danish ideas for future exports of dental education programs and dental personnel are also discussed.......The effects of Danish cultural traditions on dental education in Denmark are described, as well as the system's current structure and developing issues. Some Danish ideas for future exports of dental education programs and dental personnel are also discussed....

Ion-Responsive Drug Delivery Systems.

Science.gov (United States)

Yoshida, Takayuki; Shakushiro, Kohsuke; Sako, Kazuhiro

2018-02-08

Some kinds of cations and anions are contained in body fluids such as blood, interstitial fluid, gastrointestinal juice, and tears at relatively high concentration. Ionresponsive drug delivery is available to design the unique dosage formulations which provide optimized drug therapy with effective, safe and convenient dosing of drugs. The objective of the present review was to collect, summarize, and categorize recent research findings on ion-responsive drug delivery systems. Ions in body fluid/formulations caused structural changes of polymers/molecules contained in the formulations, allow formulations exhibit functions. The polymers/molecules responding to ions were ion-exchange resins/fibers, anionic or cationic polymers, polymers exhibiting transition at lower critical solution temperature, self-assemble supramolecular systems, peptides, and metalorganic frameworks. The functions of ion-responsive drug delivery systems were categorized to controlled drug release, site-specific drug release, in situ gelation, prolonged retention at the target sites, and enhancement of drug permeation. Administration of the formulations via oral, ophthalmic, transdermal, and nasal routes has showed significant advantages in the recent literatures. Many kinds of drug delivery systems responding to ions have been reported recently for several administration routes. Improvement and advancement of these systems can maximize drugs potential and contribute to patients in the world. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Effects of Dental 3D Multimedia System on the Performance of Junior Dental Students in Preclinical Practice: A Report from China

Science.gov (United States)

Hu, Jian; Yu, Hao; Shao, Jun; Li, Zhiyong; Wang, Jiawei; Wang, Yining

2009-01-01

Background: Computer-assisted tools are rarely adopted for dental education in China. In China, 3D digital technology, such as Virtual Reality Systems, are often rejected in the dental field due to prohibitive pricing. There is also a reluctance to move away from traditional patterns of dental education. Objective: The current study is one of a…

A Comprehensive Review on: Transdermal drug delivery systems.

OpenAIRE

Kharat, Rekha; Bathe, Ritesh Suresh

2016-01-01

Transdermal drug delivery system was introduced to overcome the difficulties of drug delivery through oral route. Despite their relatively higher costs, transdermal delivery systems have proved advantageous for delivery of selected drugs, such as estrogens, testosterone, clonidine and nitro-glycerine. Transdermal delivery provides a leading edge over injectable and oral routes by increasing patient compliance and avoiding first pass metabolism respectively. Topical  administration  of  therap...

Electronic Nicotine Delivery Systems Key Facts Infographic

Data.gov (United States)

U.S. Department of Health & Human Services — Explore the Electronic Nicotine Delivery Systems Key Facts Infographic which outlines key facts related to electronic nicotine delivery systems (ENDS), including...

Interacting institutional logics in general dental practice.

Science.gov (United States)

Harris, Rebecca; Holt, Robin

2013-10-01

We investigate the organisational field of general dental practice and how agents change or maintain the institution of values associated with the everyday work of health care provision. Our dataset comprise archival literature and policy documents, interview data from field level actors, as well as service delivery level interview data and secondary data gathered (2011-12) from 16 English dental practices. Our analysis provides a typology of institutional logics (prevailing systems of value) experienced in the field of dental practice. Confirming current literature, we find two logics dominate how care is assessed: business-like health care and medical professionalism. We advance the literature by finding the business-like health care logic further distinguished by values of commercialism on the one hand and those of accountability and procedural diligence on the other. The logic of professionalism we also find is further distinguished into a commitment to clinical expertise and independence in delivering patient care on the one hand, and concerns for the autonomy and sustainability of a business enterprise on the other. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

Smart Drug Delivery Systems in Cancer Therapy.

Science.gov (United States)

Unsoy, Gozde; Gunduz, Ufuk

2018-02-08

Smart nanocarriers have been designed for tissue-specific targeted drug delivery, sustained or triggered drug release and co-delivery of synergistic drug combinations to develop safer and more efficient therapeutics. Advances in drug delivery systems provide reduced side effects, longer circulation half-life and improved pharmacokinetics. Smart drug delivery systems have been achieved successfully in the case of cancer. These nanocarriers can serve as an intelligent system by considering the differences of tumor microenvironment from healthy tissue, such as low pH, low oxygen level, or high enzymatic activity of matrix metalloproteinases. The performance of anti-cancer agents used in cancer diagnosis and therapy is improved by enhanced cellular internalization of smart nanocarriers and controlled drug release. Here, we review targeting, cellular internalization; controlled drug release and toxicity of smart drug delivery systems. We are also emphasizing the stimulus responsive controlled drug release from smart nanocarriers. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Evaluation of an interprofessional education program for advanced practice nursing and dental students: The oral-systemic health connection.

Science.gov (United States)

Nash, Whitney A; Hall, Lynne A; Lee Ridner, S; Hayden, Dedra; Mayfield, Theresa; Firriolo, John; Hupp, Wendy; Weathers, Chandra; Crawford, Timothy N

2018-03-27

In response to the growing body of evidence supporting the need for expanded interprofessional education among health professions, an interprofessional education program, based on the Interprofessional Education Collaborative Core Competencies, was piloted with nurse practitioner and dental students. The purpose of this pilot study was to evaluate a technology enhanced interprofessional education program focused on the oral-systemic health connection for nurse practitioner and dental students. A two-group comparative study using cross-sectional data and a quasi-experimental one-group pre-test/post-test design were used to evaluate students' knowledge of IPE core competencies, attitudes toward interprofessional education and interdisciplinary teamwork, and self-efficacy in functioning as a member of an interdisciplinary team. This program was implemented with master of science in nursing students pursuing a primary care nurse practitioner (NP) degree and dental students at a large urban academic health sciences center. Cohort 1 (N = 75) consisted of NP (n = 34) and dental students (n = 41) at the end of their degree program who participated in a one-time survey. Cohort 2 (N = 116) was comprised of second-year NP students (n = 22) and first-year dental students (n = 94) who participated in the IPE program. Students participated in a multi-faceted educational program consisting of technology- enhanced delivery as well as interactive exercises in the joint health assessment course. Data were collected prior to the initiation and at the conclusion of the program. Nurse practitioner and dental students who participated in the program had better self-efficacy in functioning as a member of an interdisciplinary team than graduating students who did not participate. Students from both nursing and dentistry who participated in the program had significantly improved self-efficacy in functioning in interprofessional teams from pre- to post-test. An

Supersaturating drug delivery systems

DEFF Research Database (Denmark)

Laitinen, Riikka; Löbmann, Korbinian; Grohganz, Holger

2017-01-01

of the bioavailability of poorly water-soluble drugs by increasing the driving force for drug absorption. However, ASDs often require a high weight percentage of carrier (usually a hydrophilic polymer) to ensure molecular mixing of the drug in the carrier and stabilization of the supersaturated state, often leading......Amorphous solid dispersions (ASDs) are probably the most common and important supersaturating drug delivery systems for the formulation of poorly water-soluble compounds. These delivery systems are able to achieve and maintain a sustained drug supersaturation which enables improvement...... strategy for poorly-soluble drugs. While the current research on co-amorphous formulations is focused on preparation and characterization of these systems, more detailed research on their supersaturation and precipitation behavior and the effect of co-formers on nucleation and crystal growth inhibition...

Biomimetic extracellular matrix mediated somatic stem cell differentiation: applications in dental pulp tissue regeneration

Science.gov (United States)

Ravindran, Sriram; George, Anne

2015-01-01

Dental caries is one of the most widely prevalent infectious diseases in the world. It affects more than half of the world's population. The current treatment for necrotic dental pulp tissue arising from dental caries is root canal therapy. This treatment results in loss of tooth sensitivity and vitality making it prone for secondary infections. Over the past decade, several tissue-engineering approaches have attempted regeneration of the dental pulp tissue. Although several studies have highlighted the potential of dental stem cells, none have transitioned into a clinical setting owing to limited availability of dental stem cells and the need for growth factor delivery systems. Our strategy is to utilize the intact ECM of pulp cells to drive lineage specific differentiation of bone marrow derived mesenchymal stem cells. From a clinical perspective, pulp ECM scaffolds can be generated using cell lines and patient specific somatic stem cells can be used for regeneration. Our published results have shown the feasibility of using pulp ECM scaffolds for odontogenic differentiation of non-dental mesenchymal cells. This focused review discusses the issues surrounding dental pulp tissue regeneration and the potential of our strategy to overcome these issues. PMID:25954205

The impacts of dental filling materials on RapidArc treatment planning and dose delivery: Challenges and solution

Energy Technology Data Exchange (ETDEWEB)

Mail, Noor; Al-Ghamdi, S.; Saoudi, A. [Princess Norah Oncology Center, National Guard Health Affairs, Jeddah 21423, Saudi Arabia and King Abdullah International Medical Research Center, Jeddah 21423 (Saudi Arabia); Albarakati, Y.; Ahmad Khan, M.; Saeedi, F.; Safadi, N. [Princess Norah Oncology Center, National Guard Health Affairs, Jeddah 21423 (Saudi Arabia)

2013-08-15

Purpose: The presence of high-density material in the oral cavity creates dose perturbation in both downstream and upstream directions at the surfaces of dental filling materials (DFM). In this study, the authors have investigated the effect of DFM on head and neck RapidArc treatment plans and delivery. Solutions are proposed to address (1) the issue of downstream dose perturbation, which might cause target under dosage, and (2) to reduce the upstream dose from DFM which may be the primary source of mucositis. In addition, an investigation of the clinical role of a custom-made plastic dental mold/gutter (PDM) in sparing the oral mucosa and tongue reaction is outlined.Methods: The influence of the dental filling artifacts on dose distribution was investigated using a geometrically well-defined head and neck intensity modulated radiation therapy (IMRT) verification phantom (PTW, Freiberg, Germany) with DFM inserts called amalgam, which contained 50% mercury, 25% silver, 14% tin, 8% copper, and 3% other trace metals. Three RapidArc plans were generated in the Varian Eclipse System to treat the oral cavity using the same computer tomography (CT) dataset, including (1) a raw CT image, (2) a streaking artifacts region, which was replaced with a mask of 10 HU, and (3) a 2 cm-thick 6000 HU virtual filter [a volume created in treatment planning system to compensate for beam attenuation, where the thickness of this virtual filter is based on the measured percent depth dose (PDD) data and Eclipse calculation]. The dose delivery for the three plans was verified using Gafchromic-EBT2 film measurements. The custom-made PDM technique to reduce backscatter dose was clinically tested on four head and neck cancer patients (T3, N1, M0) with DFM, two patients with PDM and the other two patients without PDM. The thickness calculation of the PDM toward the mucosa and tongue was purely based on the measured upstream dose. Patients’ with oral mucosal reaction was clinically examined

The impacts of dental filling materials on RapidArc treatment planning and dose delivery: Challenges and solution

International Nuclear Information System (INIS)

Mail, Noor; Al-Ghamdi, S.; Saoudi, A.; Albarakati, Y.; Ahmad Khan, M.; Saeedi, F.; Safadi, N.

2013-01-01

Purpose: The presence of high-density material in the oral cavity creates dose perturbation in both downstream and upstream directions at the surfaces of dental filling materials (DFM). In this study, the authors have investigated the effect of DFM on head and neck RapidArc treatment plans and delivery. Solutions are proposed to address (1) the issue of downstream dose perturbation, which might cause target under dosage, and (2) to reduce the upstream dose from DFM which may be the primary source of mucositis. In addition, an investigation of the clinical role of a custom-made plastic dental mold/gutter (PDM) in sparing the oral mucosa and tongue reaction is outlined.Methods: The influence of the dental filling artifacts on dose distribution was investigated using a geometrically well-defined head and neck intensity modulated radiation therapy (IMRT) verification phantom (PTW, Freiberg, Germany) with DFM inserts called amalgam, which contained 50% mercury, 25% silver, 14% tin, 8% copper, and 3% other trace metals. Three RapidArc plans were generated in the Varian Eclipse System to treat the oral cavity using the same computer tomography (CT) dataset, including (1) a raw CT image, (2) a streaking artifacts region, which was replaced with a mask of 10 HU, and (3) a 2 cm-thick 6000 HU virtual filter [a volume created in treatment planning system to compensate for beam attenuation, where the thickness of this virtual filter is based on the measured percent depth dose (PDD) data and Eclipse calculation]. The dose delivery for the three plans was verified using Gafchromic-EBT2 film measurements. The custom-made PDM technique to reduce backscatter dose was clinically tested on four head and neck cancer patients (T3, N1, M0) with DFM, two patients with PDM and the other two patients without PDM. The thickness calculation of the PDM toward the mucosa and tongue was purely based on the measured upstream dose. Patients’ with oral mucosal reaction was clinically examined

Methods and metrics challenges of delivery-system research

Directory of Open Access Journals (Sweden)

Alexander Jeffrey A

2012-03-01

Full Text Available Abstract Background Many delivery-system interventions are fundamentally about change in social systems (both planned and unplanned. This systems perspective raises a number of methodological challenges for studying the effects of delivery-system change--particularly for answering questions related to whether the change will work under different conditions and how the change is integrated (or not into the operating context of the delivery system. Methods The purpose of this paper is to describe the methodological and measurement challenges posed by five key issues in delivery-system research: (1 modeling intervention context; (2 measuring readiness for change; (3 assessing intervention fidelity and sustainability; (4 assessing complex, multicomponent interventions; and (5 incorporating time in delivery-system models to discuss recommendations for addressing these issues. For each issue, we provide recommendations for how research may be designed and implemented to overcome these challenges. Results and conclusions We suggest that a more refined understanding of the mechanisms underlying delivery-system interventions (treatment theory and the ways in which outcomes for different classes of individuals change over time are fundamental starting points for capturing the heterogeneity in samples of individuals exposed to delivery-system interventions. To support the research recommendations outlined in this paper and to advance understanding of the "why" and "how" questions of delivery-system change and their effects, funding agencies should consider supporting studies with larger organizational sample sizes; longer duration; and nontraditional, mixed-methods designs. A version of this paper was prepared under contract with the Agency for Healthcare Research and Quality (AHRQ, US Department of Health and Human Services for presentation and discussion at a meeting on "The Challenge and Promise of Delivery System Research," held in Sterling, VA, on

Use of digital impression systems with intraoral scanners for fabricating restorations and fixed dental prostheses.

Science.gov (United States)

Takeuchi, Yoshimasa; Koizumi, Hiroyasu; Furuchi, Mika; Sato, Yohei; Ohkubo, Chikahiro; Matsumura, Hideo

2018-01-01

Accurate impressions are essential in fabri-cating dental restorations and fixed dental prostheses. During the last decade, digital impression systems have improved substantially. This review discusses the accuracy of digital impression systems for fabrication of dental restorations and fixed dental prostheses. A literature search in PubMed was performed for the period from July 2010 through June 2017. The search keywords were Cerec, digital impression, direct digitalization, indirect digitalization, and intraoral scanner. Only relevant studies are summarized and discussed in this review. In general, the latest systems have considerably reduced the time required for impression making, and the accuracy and marginal fit of digital impression systems have recently improved. Restorations and fixed dental prostheses fabricated with currently available digital impression systems and intraoral scanners exhibit clinically acceptable ranges of marginal gap in both direct and indirect procedures.

[Different forms of payment systems for dental services and their impact on care].

Science.gov (United States)

Sória, Marina Lara; Bordin, Ronaldo; da Costa Filho, Luiz Cesar

2002-01-01

The Brazilian dental care sector is facing a paradoxical crisis characterized by a surplus of dentists and a large contingent of people lacking dental care, thus highlighting the need to improve management strategies. One necessary step is to analyze the various payment schemes for dental services. This paper reviews two important approaches, fee for service and capitation, and considers the impacts and consequences of payment strategies on the dental care system.

Recent Trends of Polymer Mediated Liposomal Gene Delivery System

Directory of Open Access Journals (Sweden)

Shyamal Kumar Kundu

2014-01-01

Full Text Available Advancement in the gene delivery system have resulted in clinical successes in gene therapy for patients with several genetic diseases, such as immunodeficiency diseases, X-linked adrenoleukodystrophy (X-ALD blindness, thalassemia, and many more. Among various delivery systems, liposomal mediated gene delivery route is offering great promises for gene therapy. This review is an attempt to depict a portrait about the polymer based liposomal gene delivery systems and their future applications. Herein, we have discussed in detail the characteristics of liposome, importance of polymer for liposome formulation, gene delivery, and future direction of liposome based gene delivery as a whole.

Systemic assessment of patients undergoing dental implant surgeries: A trans- and post-operative analysis

OpenAIRE

Sanjay Byakodi; Sachin Kumar; Rajesh Kumar Reddy; Vipin Kumar; Shipra Sepolia; Shivangi Gupta; Harkanwal Preet Singh

2017-01-01

Background: Procedure-related and patient-related factors influence the prognosis of dental implants to a major extent. Hence, we aimed to evaluate and analyze various systemic factors in patients receiving dental implants. Materials and Methods: Fifty-one patients were included in the study, in which a total of 110 dental implants were placed. Complete examination of the subjects was done before and after placement of dental implants. Implant surgery was planned, and osseointegrated dental i...

UDENTE (Universal Dental E-Learning) a golden opportunity for dental education.

Science.gov (United States)

Reynolds, Patricia

2012-01-10

The incorporation of technological advancements in higher education has started to bridge the gap in local, national and global delivery of dental courses. This gap, including the global decrease in senior clinical academics, has influenced the development of new teaching and learning techniques. Institutional virtual learning environments (VLE) and other e-learning resources are now in higher demand. This paper describes how one such innovative solutions has been IVIDENT (International Virtual Dental School), has enabled secure and seamless access to high quality e-content and tools through an innovative, universal flexible learning platform. IVIDENT, now UDENTE (Universal Dental E-learning) has been shown to offer new learning experiences for students of dentistry, but its approach can apply across all educational domains. UDENTE also benefits staff as it allows them to contribute and access resources through peer reviewed publishing processes, which ensure the highest quality in education. UDENTE was developed thanks to a £2.3 million grant from the Higher Education Funding Council for England (HEFCE) and the Department of Health. http://www.udente.org. This academically led educational research project involved dental schools in seven countries. An initially scoping of requirements was followed by elaboration of the tools needed. Pilot testing of the tools, systems and learning resources in particular and the impact of the UDENTE in general were carried out. The pilots revealed evidence of positive impact of a space for learning, teaching, development and communication, with tools for planning of electives and administrative support. The results of these initial pilots have been positive and encouraging, describing UDENTE as an accessible, user friendly platform providing tools that otherwise would be difficult to access in a single space. However, attention to supporting faculty to embrace these new learning domains is essential if such technology enhanced

Stimuli-Responsive Polymeric Systems for Controlled Protein and Peptide Delivery: Future Implications for Ocular Delivery.

Science.gov (United States)

Mahlumba, Pakama; Choonara, Yahya E; Kumar, Pradeep; du Toit, Lisa C; Pillay, Viness

2016-07-30

Therapeutic proteins and peptides have become notable in the drug delivery arena for their compatibility with the human body as well as their high potency. However, their biocompatibility and high potency does not negate the existence of challenges resulting from physicochemical properties of proteins and peptides, including large size, short half-life, capability to provoke immune responses and susceptibility to degradation. Various delivery routes and delivery systems have been utilized to improve bioavailability, patient acceptability and reduce biodegradation. The ocular route remains of great interest, particularly for responsive delivery of macromolecules due to the anatomy and physiology of the eye that makes it a sensitive and complex environment. Research in this field is slowly gaining attention as this could be the breakthrough in ocular drug delivery of macromolecules. This work reviews stimuli-responsive polymeric delivery systems, their use in the delivery of therapeutic proteins and peptides as well as examples of proteins and peptides used in the treatment of ocular disorders. Stimuli reviewed include pH, temperature, enzymes, light, ultrasound and magnetic field. In addition, it discusses the current progress in responsive ocular drug delivery. Furthermore, it explores future prospects in the use of stimuli-responsive polymers for ocular delivery of proteins and peptides. Stimuli-responsive polymers offer great potential in improving the delivery of ocular therapeutics, therefore there is a need to consider them in order to guarantee a local, sustained and ideal delivery of ocular proteins and peptides, evading tissue invasion and systemic side-effects.

Digital dental photography. Part 2: Purposes and uses.

Science.gov (United States)

Ahmad, I

2009-05-09

Although the primary purpose of using digital photography in dentistry is for recording various aspects of clinical information in the oral cavity, other benefits also accrue. Detailed here are the uses of digital images for dento-legal documentation, education, communication with patients, dental team members and colleagues and for portfolios, and marketing. These uses enhance the status of a dental practice and improve delivery of care to patients.

Alternative practices of achieving anaesthesia for dental procedures: a review.

Science.gov (United States)

Angelo, Zavattini; Polyvios, Charalambous

2018-04-01

Managing pain and anxiety in patients has always been an essential part of dentistry. To prevent pain, dentists administer local anaesthesia (LA) via a needle injection. Unfortunately, anxiety and fear that arise prior to and/or during injection remains a barrier for many children and adults from receiving dental treatment. There is a constant search for techniques to alleviate the invasive and painful nature of the needle injection. In recent years, researchers have developed alternative methods which enable dental anaesthesia to be less invasive and more patient-friendly. The aim of this review is to highlight the procedures and devices available which may replace the conventional needle-administered local anaesthesia. The most known alternative methods in providing anaesthesia in dentistry are: topical anaesthesia, electronic dental anaesthesia, jet-injectors, iontophoresis, and computerized control local anaesthesia delivery systems. Even though these procedures are well accepted by patients to date, it is the authors' opinion that the effectiveness practicality of such techniques in general dentistry is not without limitations.

Identifying barriers to receiving preventive dental services: expanding access to preventive dental hygiene services through affiliated practice.

Science.gov (United States)

Gross-Panico, Michelle L; Freeman, Wilbur K

2012-01-01

Minority children and children from lower income families are more likely to experience the burden of oral disease. Since oral disease reduces quality of life, it is a priority to utilize preventive dental services. The research questions ask if affiliated practice increases utilization of preventive dental services by underserved children from birth to 18 years of age, and what the barriers to receiving preventive dental services are and their level of importance. A survey was administered to parents/guardians of patients from birth to 18 years of age who received preventive dental services from Catholic Healthcare West East Valley Children's Dental Clinic, an affiliated practice dental clinic in Chandler, Arizona. Thirty-four surveys were completed: 21 completed in English and 13 completed in Spanish. The data was analyzed to provide descriptive statistics and non-parametrically analyzed using the Friedman's, Kendall's W and Wilcoxon Signed Ranks Tests. The cost of preventive dental services is more important to this population than both convenience of appointment time and distance traveled. As the cost increases for preventive dental services, this population will utilize preventive dental services less frequently. The study indicated that the increase of self-reported utilization of preventive dental services by underserved children, ranging in age from birth to 18 years old, in Arizona affiliated practice dental clinics, was primarily impacted by perceived reduced costs of receiving care. Funding efforts, reimbursement mechanisms and legislative policies should support this dental care delivery model to provide care to underserved children, adults and seniors throughout the U.S.

The Research Progress of Targeted Drug Delivery Systems

Science.gov (United States)

Zhan, Jiayin; Ting, Xizi Liang; Zhu, Junjie

2017-06-01

Targeted drug delivery system (DDS) means to selectively transport drugs to targeted tissues, organs, and cells through a variety of drugs carrier. It is usually designed to improve the pharmacological and therapeutic properties of conventional drugs and to overcome problems such as limited solubility, drug aggregation, poor bio distribution and lack of selectivity, controlling drug release carrier and to reduce normal tissue damage. With the characteristics of nontoxic and biodegradable, it can increase the retention of drug in lesion site and the permeability, improve the concentration of the drug in lesion site. at present, there are some kinds of DDS using at test phase, such as slow controlled release drug delivery system, targeted drug delivery systems, transdermal drug delivery system, adhesion dosing system and so on. This paper makes a review for DDS.

A study on nanodiamond-based drug delivery system

International Nuclear Information System (INIS)

Li Jing; Zhang Xiaoyong; Zhu Ying; Li Wenxin; Huang Qing

2010-01-01

A multifunctional drug delivery system based on nanodiamonds (NDs) has been developed. FITC, HCPT and TF were absorbed on NDs successively to form the multifunctional complex. The NDs and ND complex samples were characterized by TEM, FR-IR and UV-V. The results indicated that this drug delivery system is a high loading system. Efficacy of the drug delivery system on Hela cell was evaluated with MTT assays and fluorescence microscopy. The results show that multifunction of the NDs complex include fluorescence, targeting and high efficacy. (authors)

Nanomaterials for Craniofacial and Dental Tissue Engineering.

Science.gov (United States)

Li, G; Zhou, T; Lin, S; Shi, S; Lin, Y

2017-07-01

Tissue engineering shows great potential as a future treatment for the craniofacial and dental defects caused by trauma, tumor, and other diseases. Due to the biomimetic features and excellent physiochemical properties, nanomaterials are of vital importance in promoting cell growth and stimulating tissue regeneration in tissue engineering. For craniofacial and dental tissue engineering, the frequently used nanomaterials include nanoparticles, nanofibers, nanotubes, and nanosheets. Nanofibers are attractive for cell invasion and proliferation because of their resemblance to extracellular matrix and the presence of large pores, and they have been used as scaffolds in bone, cartilage, and tooth regeneration. Nanotubes and nanoparticles improve the mechanical and chemical properties of scaffold, increase cell attachment and migration, and facilitate tissue regeneration. In addition, nanofibers and nanoparticles are also used as a delivery system to carry the bioactive agent in bone and tooth regeneration, have better control of the release speed of agent upon degradation of the matrix, and promote tissue regeneration. Although applications of nanomaterials in tissue engineering remain in their infancy with numerous challenges to face, the current results indicate that nanomaterials have massive potential in craniofacial and dental tissue engineering.

Elastin-Like Recombinamers As Smart Drug Delivery Systems.

Science.gov (United States)

Arias, F Javier; Santos, Mercedes; Ibanez-Fonseca, Arturo; Pina, Maria Jesus; Serrano, Sofía

2018-02-19

Drug delivery systems that are able to control the release of bioactive molecules and designed to carry drugs to target sites are of particular interest for tissue therapy. Moreover, systems comprising materials that can respond to environmental stimuli and promote self-assembly and higher order supramolecular organization are especially useful in the biomedical field. Objetive: This review focuses on biomaterials suitable for this purpose and that include elastin-like recombinamers (ELRs), a class of proteinaceous polymers bioinspired by natural elastin, designed using recombinant technologies. The self-assembly and thermoresponsive behaviour of these systems, along with their biodegradability, biocompatibility and well-defined composition as a result of their tailormade design, make them particularly attractive for controlled drug delivery. ELR-based delivery systems that allow targeted delivery are reviewed, especially ELR-drug recombinant fusion constructs, ELR-drug systems chemically bioconjugated in their monomeric and soluble forms, and drug encapsulation by nanoparticle-forming ELRs. Subsequently, the review focuses on those drug carriers in which smart release is triggered by pH or temperature with a particular focus on cancer treatments. Systems for controlled drug release based on depots and hydrogels that act as both a support and reservoir in which drugs can be stored will be described, and their applications in drug delivery discussed. Finally, smart drug-delivery systems not based on ELRs, including those comprising proteins, synthetic polymers and non-polymeric systems, will also be briefly discussed. Several different constructions based on ELRs are potential candidates for controlled drug delivery to be applied in advanced biomedical treatments. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Recent trends in challenges and opportunities of Transdermal drug delivery system

OpenAIRE

P.M.Patil; P.D.Chaudhari; Jalpa K.Patel; K.A.Kedar; P.P.Katolkar

2012-01-01

Drug delivery system relates to the production of a drug, its delivery medium, and the way of administration. Drug delivery systems are even used for administering nitroglycerin. Transdermal drug delivery system is the system in which the delivery of the active ingredients of the drug occurs by the means of skin. Various types of transdermal patches are used. There are various methods to enhance the transdermal drug delivery system. But using microfabricated microneedles drugs are delivered v...

An Application of Geospatial Information Systems (GIS) Technology to Anatomic Dental Charting

OpenAIRE

Bartling, William C.; Schleyer, Titus K.L.

2003-01-01

Historically, an anatomic dental chart is a compilation of color-coded symbols and numbers used within a template, either paper or computerized, to create a graphic record of a patient’s oral health status. This poster depicts how Geospatial Information System (GIS) technology can be used to create an accurate, current anatomic dental chart that contains detailed information not present in current charting systems.

Auditing Information System : Delivery Product Service

Directory of Open Access Journals (Sweden)

Purwoko Purwoko

2011-05-01

Full Text Available Purpose of the research is to ensure the securities of information system asset and to ensure if informa-tion system support the operational and data collected was valid. Research method that used in this research were library studies and field studies. Field studies such an observation, questioner, and inter-view. the expected result are founding the weakness of security management control, operational man-agement control, input control, and output control of risk happened in the company. Conclusion of this research are the system on the company work good and there’s no potential risk happened and make an impact to the delivery process of information system.Index Terms - Auditing Information system, Delivery product process.

Drug delivery from the oral cavity: a focus on mucoadhesive buccal drug delivery systems.

Science.gov (United States)

Shinkar, Dattatraya Manohar; Dhake, Avinash Sridhar; Setty, Chitral Mallikarjuna

2012-01-01

Since the early 1980s the concept of mucoadhesion has gained considerable interest in pharmaceutical technology. The various advantages associated with these systems made buccal drug delivery as a novel route of drug administration. It prolongs the residence time of the dosage form at the site of application. These systems remain in close contact with the absorption tissue, the mucous membrane, and thus contribute to improved and/or better therapeutic performance of the drug and of both local and systemic effects. This review highlights the anatomy and structure of oral mucosa, mechanism and theories of mucoadhesion, factors affecting mucoadhesion, characteristics and properties of desired mucoadhesive polymers, various types of dosage forms, and general considerations in design of mucoadhesive buccal dosage forms, permeation enhancers, and evaluation methods. Over the past few decades the mucoadhesive buccal drug delivery system has received a great deal of attention to develop mucoadhesive dosage forms to enable the prolonged retention at the site of action, providing a controlled release of drug for improved therapeutic outcome. Mucoadhesive drug delivery gives facility to include a permeation enhancer/enzyme inhibitor or pHmodifier in the formulation and versatility in designing as multidirectional or unidirectional release systems for local and systemic action. Local delivery to tissues of the oral cavity has a number of applications, including treatment of local conditions such as periodontal disease, bacterial and fungal infections, and aphthous stomatitis and vesiculo bullous diseases. For the treatment of chronic diseases, the mucoadhesive buccal drug delivery system allows easily accessibility and is generally well-accepted for administeringdrugs by systemic action.

A real-time virtual delivery system for photon radiotherapy delivery monitoring

Directory of Open Access Journals (Sweden)

Feng Shi

2014-03-01

Full Text Available Purpose: Treatment delivery monitoring is important for radiotherapy, which enables catching dosimetric error at the earliest possible opportunity. This project develops a virtual delivery system to monitor the dose delivery process of photon radiotherapy in real-time using GPU-based Monte Carlo (MC method.Methods: The simulation process consists of 3 parallel CPU threads. A thread T1 is responsible for communication with a linac, which acquires a set of linac status parameters, e.g. gantry angles, MLC configurations, and beam MUs every 20 ms. Since linac vendors currently do not offer interface to acquire data in real time, we mimic this process by fetching information from a linac dynalog file at the set frequency. Instantaneous beam fluence map (FM is calculated based. A FM buffer is also created in T1 and the instantaneous FM is accumulated to it. This process continues, until a ready signal is received from thread T2 on which an in-house developed MC dose engine executes on GPU. At that moment, the accumulated FM is transferred to T2 for dose calculations, and the FM buffer in T1 is cleared. Once the dose calculation finishes, the resulting 3D dose distribution is directed to thread T3, which displays it in three orthogonal planes in color wash overlaid on the CT image. This process continues to monitor the 3D dose distribution in real-time.Results: An IMRT and a VMAT cases used in our patient-specific QA are studied. Maximum dose differences between our system and treatment planning system are 0.98% and 1.58% for the IMRT and VMAT cases, respectively. The update frequency is >10Hz and the relative uncertainty level is 2%.Conclusion: By embedding a GPU-based MC code in a novel data/work flow, it is possible to achieve real-time MC dose calculations to monitor delivery process.------------------------------Cite this article as: Shi F, Gu X, Graves YJ, Jiang S, Jia X. A real-time virtual delivery system for photon radiotherapy delivery

Concordance of chart and billing data with direct observation in dental practice.

Science.gov (United States)

Demko, Catherine A; Victoroff, Kristin Zakariasen; Wotman, Stephen

2008-10-01

The commonly used methods of chart review, billing data summaries and practitioner self-reporting have not been examined for their ability to validly and reliably represent time use and service delivery in routine dental practice. A more thorough investigation of these data sources would provide insight into the appropriateness of each approach for measuring various clinical behaviors. The aim of this study was to assess the validity of commonly used methods such as dental chart review, billing data, or practitioner self-report compared with a 'gold standard' of information derived from direct observation of routine dental visits. A team of trained dental hygienists directly observed 3751 patient visits in 120 dental practices and recorded the behaviors and procedures performed by dentists and hygienists during patient contact time. Following each visit, charts and billing records were reviewed for the performed and billed procedures. Dental providers characterized their frequency of preventive service delivery through self-administered surveys. We standardized the observation and abstraction methods to obtain optimal measures from each of the multiple data sources. Multi-rater kappa coefficients were computed to monitor standardization, while sensitivity, specificity, and kappa coefficients were calculated to compare the various data sources with direct observation. Chart audits were more sensitive than billing data for all observed procedures and demonstrated higher agreement with directly observed data. Chart and billing records were not sensitive for several prevention-related tasks (oral cancer screening and oral hygiene instruction). Provider self-reports of preventive behaviors were always over-estimated compared with direct observation. Inter-method reliability kappa coefficients for 13 procedures ranged from 0.197 to 0.952. These concordance findings suggest that strengths and weaknesses of data collection sources should be considered when investigating

Current dental adhesives systems. A narrative review.

Science.gov (United States)

Milia, Egle; Cumbo, Enzo; Cardoso, Rielson Jose A; Gallina, Giuseppe

2012-01-01

Adhesive dentistry is based on the development of materials which establish an effective bond with the tooth tissues. In this context, adhesive systems have attracted considerable research interest in recent years. Successful adhesive bonding depends on the chemistry of the adhesive, on appropriate clinical handling of the material as well as on the knowledge of the morphological changes caused on dental tissue by different bonding procedures. This paper outlines the status of contemporary adhesive systems, with particular emphasis on chemical characteristics and mode of interaction of the adhesives with enamel and dentinal tissues. Dental adhesives are used for several clinical applications and they can be classified based on the clinical regimen in "etch-and-rinse adhesives" and "self-etch adhesives". Other important considerations concern the different anatomical characteristics of enamel and dentine which are involved in the bonding procedures that have also implications for the technique used as well as for the quality of the bond. Etch-and-rinse adhesive systems generally perform better on enamel than self-etching systems which may be more suitable for bonding to dentine. In order to avoid a possible loss of the restoration, secondary caries or pulp damage due to bacteria penetration or due to cytotoxicity effects of eluted adhesive components, careful consideration of several factors is essential in selecting the suitable bonding procedure and adhesive system for the individual patient situation.

Distance Synchronous Information Systems Course Delivery

Science.gov (United States)

Peslak, Alan R.; Lewis, Griffith R.; Aebli, Fred

2014-01-01

Teaching computer information systems via distance education is a challenge for both student and faculty. Much research work has been performed on methods of teaching via distance education. Today we are faced with a variety of options for course delivery. Asynchronous delivery via online or lesson instruction still remains most common. But…

Microemulsion Drug Delivery Systems for Radiopharmacy Studies

Directory of Open Access Journals (Sweden)

Emre Ozgenc

2016-11-01

Full Text Available Microemulsions have been used increasingly for last year’s because of ideal properties like favorable drug delivery, ease of preparation and physical stability. They have been improved the solubility and efficacy of the drug and reduce the side effects. Use of radiolabeled microemulsions plays an alternative role in drug delivery systems by investigating the formation, stability and application of microemulsions in radiopharmacy. Gama scintigraphic method is well recognized for developing and detecting the biodistribution of newly developed drugs or formulation. This review will focus on how radionuclides are able to play role with characterization studies of microemulsion drug delivery systems.

Maintenance of an Adequate Dental Hygiene Education System.

Science.gov (United States)

Ley, Eugene; And Others

1984-01-01

Administrative decisions about the future of dental hygiene programs are often based on inadequate information about employment trends and about the importance of the dental hygienist in dental practices. Studies indicate that demand for dental hygiene services will remain high in the 1980s. (Author/MLW)

The development of a learning management system for dental radiology education: A technical report

International Nuclear Information System (INIS)

Chang, Hee Jin; Huh, Kyung Hoe; Yi, Won Jin; Heo, Min Suk; Lee, Sam Sun; Choi, Soon Chul; Symkhampha, Khanthaly

2017-01-01

This study was conducted to suggest the development of a learning management system for dental radiology education using the Modular Object-Oriented Dynamic Learning Environment (Moodle). Moodle is a well-known and verified open-source software-learning management system (OSS-LMS). The Moodle software was installed on a server computer and customized for dental radiology education. The system was implemented for teaching undergraduate students to diagnose dental caries in panoramic images. Questions were chosen that could assess students' diagnosis ability. Students were given several questions corresponding to each of 100 panoramic images. The installation and customization of Moodle was feasible, cost-effective, and time-saving. By having students answer questions repeatedly, it was possible to train them to examine panoramic images sequentially and thoroughly. Based on its educational efficiency and efficacy, the adaptation of an OSS-LMS in dental school may be highly recommended. The system could be extended to continuing education for dentists. Further studies on the objective evaluation of knowledge acquisition and retention are needed

A wireless actuating drug delivery system

International Nuclear Information System (INIS)

Jo, Won-Jun; Baek, Seung-Ki; Park, Jung-Hwan

2015-01-01

A wireless actuating drug delivery system was devised. The system is based on induction heating for drug delivery. In this study, thermally generated nitrogen gas produced by induction heating of azobisisobutyronitrile (AIBN) was utilized for pressure-driven release of the drug. The delivery device consists of an actuator chamber, a drug reservoir, and a microchannel. A semicircular copper disc (5 and 6 mm in diameter and 100 µm thick), and thermal conductive tape were integrated as the heating element in the actuator chamber. The final device was 2.7 mm thick. 28 µl of drug solution were placed in the reservoir and the device released the drug quickly at the rate of 6 µl s −1 by induction heating at 160 µT of magnetic intensity. The entire drug solution was released and dispersed after subcutaneous implantation under identical experimental condition. This study demonstrates that the device was simply prepared and drug delivery could be achieved by wireless actuation of a thin, pressure-driven actuator. (paper)

Buccal Transmucosal Delivery System of Enalapril for Improved ...

African Journals Online (AJOL)

Purpose: To prepare and characterize buccal transmucosal delivery system of enalapril maleate for overcoming its low bioavailability, and hence provide improved therapeutic efficacy and patient compliance. Methods: Transmucosal drug delivery systems of enalapril maleate were formulated as buccal films by solvent ...

Control of dental prosthesis system with microcontroller.

Science.gov (United States)

Kapidere, M; Müldür, S; Güler, I

2000-04-01

In this study, a microcontroller-based electronic circuit was designed and implemented for dental prosthesis curing system. Heater, compressor and valve were controlled by 8-bit PIC16C64 microcontroller which is programmed using MPASM package. The temperature and time were controlled automatically by preset values which were inputted from keyboard while the pressure was kept constant. Calibration was controlled and the working range was tested. The test results showed that the system provided a good performance.

Students' clinical learning in an emerging dental school: an investigation in international collaboration between Michigan and Ghana.

Science.gov (United States)

Peters, Mathilde C; Adu-Ababio, Francis; Jarrett-Ananaba, Nejay P; Johnson, Lynn A

2013-12-01

The dearth of dental faculty members is a widely known problem that is exacerbated in countries that are attempting to begin dental education programs. This collaboration between Kwame Nkrumah University of Science and Technology and the University of Michigan investigated if dental students who have just started their clinical dental education can learn the knowledge and skills required for identifying and restoring cavitated caries lesions through compact course delivery. There were three instructional blocks: 1) didactic seminar; 2) seminar, simulated hands-on skills instruction, and clinical observation/assisting with treatment of schoolchildren; and 3) seminar, simulated skills training, and application to schoolchildren. Each dental student completed a questionnaire measuring knowledge and perceptions of knowledge, experience, and confidence at five points in time. The dental students' knowledge increased significantly as well as their perceived knowledge, experience, and confidence (p<0.0001). In general, the students showed proficiency in delivering simple treatments. The project showed that an integrated compact course delivery model may assist emerging dental schools to cope with the challenging shortage of resident faculty members.

Oral Drug Delivery Systems Comprising Altered Geometric Configurations for Controlled Drug Delivery

Directory of Open Access Journals (Sweden)

Priya Bawa

2011-12-01

Full Text Available Recent pharmaceutical research has focused on controlled drug delivery having an advantage over conventional methods. Adequate controlled plasma drug levels, reduced side effects as well as improved patient compliance are some of the benefits that these systems may offer. Controlled delivery systems that can provide zero-order drug delivery have the potential for maximizing efficacy while minimizing dose frequency and toxicity. Thus, zero-order drug release is ideal in a large area of drug delivery which has therefore led to the development of various technologies with such drug release patterns. Systems such as multilayered tablets and other geometrically altered devices have been created to perform this function. One of the principles of multilayered tablets involves creating a constant surface area for release. Polymeric materials play an important role in the functioning of these systems. Technologies developed to date include among others: Geomatrix® multilayered tablets, which utilizes specific polymers that may act as barriers to control drug release; Procise®, which has a core with an aperture that can be modified to achieve various types of drug release; core-in-cup tablets, where the core matrix is coated on one surface while the circumference forms a cup around it; donut-shaped devices, which possess a centrally-placed aperture hole and Dome Matrix® as well as “release modules assemblage”, which can offer alternating drug release patterns. This review discusses the novel altered geometric system technologies that have been developed to provide controlled drug release, also focusing on polymers that have been employed in such developments.

Efficiency performance of China's health care delivery system.

Science.gov (United States)

Zhang, Luyu; Cheng, Gang; Song, Suhang; Yuan, Beibei; Zhu, Weiming; He, Li; Ma, Xiaochen; Meng, Qingyue

2017-07-01

Improving efficiency performance of the health care delivery system has been on the agenda for the health system reform that China initiated in 2009. This study examines the changes in efficiency performance and determinants of efficiency after the reform to provide evidence to assess the progress of the reform from the perspective of efficiency. Descriptive analysis, Data Envelopment Analysis, the Malmquist Index, and multilevel regressions are used with data from multiple sources, including the World Bank, the China Health Statistical Yearbook, and routine reports. The results indicate that over the last decade, health outcomes compared with health investment were relatively higher in China than in most other countries worldwide, and the trend was stable. The overall efficiency and total factor productivity increased after the reform, indicating that the reform was likely to have had a positive impact on the efficiency performance of the health care delivery system. However, the health care delivery structure showed low system efficiency, mainly attributed to the weakened primary health care system. Strengthening the primary health care system is central to enhancing the future performance of China's health care delivery system. Copyright © 2017 John Wiley & Sons, Ltd.

Current and emerging lipid-based systems for transdermal drug delivery.

Science.gov (United States)

Singla, Sumeet K; Sachdeva, Vishal

2015-01-01

Developing a transdermal drug delivery system is a challenging task considering the selective permeability of the skin and the physicochemical properties the drug must possess to permeate through the skin. Lipid-based drug delivery systems have contributed a great deal in this direction in the last few decades, and thereby have helped to expand the range of therapeutic molecules that can be delivered through the skin in a safe and effective manner. Additionally, vesicular delivery systems such as nanoparticles and emulsions have also played important roles in providing alternative novel approaches for drug delivery. In this article, we will discuss some of the current and future lipid-based systems for transdermal drug delivery along with the associated challenges.

Advanced drug delivery systems: Nanotechnology of health design A review

Directory of Open Access Journals (Sweden)

Javad Safari

2014-04-01

Full Text Available Nanotechnology has finally and firmly entered the realm of drug delivery. Performances of intelligent drug delivery systems are continuously improved with the purpose to maximize therapeutic activity and to minimize undesirable side-effects. This review describes the advanced drug delivery systems based on micelles, polymeric nanoparticles, and dendrimers. Polymeric carbon nanotubes and many others demonstrate a broad variety of useful properties. This review emphasizes the main requirements for developing new nanotech-nology-based drug delivery systems.

Engineering the system of healthcare delivery

National Research Council Canada - National Science Library

Rouse, William B; Cortese, Denis A

2010-01-01

"As the United States continues to debate reform of its healthcare system, this book argues that providing health insurance for all without improving the delivery system will not improve the current...

Applications of polymeric nanocapsules in field of drug delivery systems.

Science.gov (United States)

Rong, Xinyu; Xie, Yinghua; Hao, Xiaomei; Chen, Tao; Wang, Yingming; Liu, Yuanyuan

2011-09-01

Drug-loaded polymeric nanocapsules have exhibited potential applications in the field of drug delivery systems in recent years. This article entails the biodegradable polymers generally used for preparing nanocapsules, which include both natural polymers and synthetic polymers. Furthermore, the article presents a general review of the different preparation methods: nanoprecipitation method, emulsion-diffusion method, double emulsification method, emulsion-coacervation method, layer-by-layer assembly method. In addition, the analysis methods of nanocapsule characteristics, such as mean size, morphology, surface characteristics, shell thickness, encapsulation efficiency, active substance release, dispersion stability, are mentioned. Also, the applications of nanocapsules as carriers for use in drug delivery systems are reviewed, which primarily involve targeting drug delivery, controlled/sustained release drug delivery systems, transdermal drug delivery systems and improving stability and bioavailability of drugs. Nanocapsules, prepared with different biodegradable polymers, have received more and more attention and have been regarded as one of the most promising drug delivery systems.

Food Delivery System with the Utilization of Vehicle Using Geographical Information System (GIS) and A Star Algorithm

Science.gov (United States)

Siregar, B.; Gunawan, D.; Andayani, U.; Sari Lubis, Elita; Fahmi, F.

2017-01-01

Food delivery system is one kind of geographical information systems (GIS) that can be applied through digitation process. The main case in food delivery system is the way to determine the shortest path and food delivery vehicle movement tracking. Therefore, to make sure that the digitation process of food delivery system can be applied efficiently, it is needed to add shortest path determination facility and food delivery vehicle tracking. This research uses A Star (A*) algorithm for determining shortest path and location-based system (LBS) programming for moving food delivery vehicle object tracking. According to this research, it is generated the integrated system that can be used by food delivery driver, customer, and administrator in terms of simplifying the food delivery system. Through the application of shortest path and the tracking of moving vehicle, thus the application of food delivery system in the scope of geographical information system (GIS) can be executed.

Masticatory Efficiency of Shortened Dental Arch Subjects with ...

African Journals Online (AJOL)

2017-05-16

May 16, 2017 ... of shortened dental arch subjects with removable partial denture: A comparative ... at the post- and pre-treatment phases was statistically significant (P = 0.001). The .... after the delivery of metal-based RPD with the denture in.

Advocacy for the Provision of Dental Hygiene Services Within the Hospital Setting: Development of a Dental Hygiene Student Rotation.

Science.gov (United States)

Juhl, Jacqueline A; Stedman, Lynn

2016-06-01

Educational preparation of dental hygiene students for hospital-based practice, and advocacy efforts promote inclusion of dental hygienists within hospital-based interdisciplinary health care teams. Although the value of attending to the oral care needs of patients in critical care units has been recognized, the potential impact of optimal oral health care for the general hospital population is now gaining attention. This article describes a hospital-based educational experience for dental hygiene students and provides advocacy strategies for inclusion of dental hygienists within the hospital interdisciplinary team. The dental hygienist authors, both educators committed to evidence-based oral health care and the profession of dental hygiene, studied hospital health care and recognized a critical void in oral health care provision within that setting. They collaboratively developed and implemented a hospital-based rotation within the curriculum of a dental hygiene educational program and used advocacy skills to encourage hospital administrators to include a dental hygiene presence within hospital-based care teams. Hospital-based dental hygiene practice, as part of interprofessional health care delivery, has the potential to improve patient well-being, shorten hospital stays, and provide fiscal savings for patients, institutions, and third party payers. Advocacy efforts can promote dental hygienists as members of hospital-based health care teams. Further research is needed to document: (1) patient outcomes resulting from optimal oral care provision in hospitals; (2) best ways to prepare dental hygienists for career opportunities within hospitals and other similar health care settings; and (3) most effective advocacy strategies to promote inclusion of dental hygienists within care teams. Copyright © 2016 Elsevier Inc. All rights reserved.

Nanotechnology-based drug delivery systems

Directory of Open Access Journals (Sweden)

Singh Baljit

2007-12-01

Full Text Available Abstract Nanoparticles hold tremendous potential as an effective drug delivery system. In this review we discussed recent developments in nanotechnology for drug delivery. To overcome the problems of gene and drug delivery, nanotechnology has gained interest in recent years. Nanosystems with different compositions and biological properties have been extensively investigated for drug and gene delivery applications. To achieve efficient drug delivery it is important to understand the interactions of nanomaterials with the biological environment, targeting cell-surface receptors, drug release, multiple drug administration, stability of therapeutic agents and molecular mechanisms of cell signalling involved in pathobiology of the disease under consideration. Several anti-cancer drugs including paclitaxel, doxorubicin, 5-fluorouracil and dexamethasone have been successfully formulated using nanomaterials. Quantom dots, chitosan, Polylactic/glycolic acid (PLGA and PLGA-based nanoparticles have also been used for in vitro RNAi delivery. Brain cancer is one of the most difficult malignancies to detect and treat mainly because of the difficulty in getting imaging and therapeutic agents past the blood-brain barrier and into the brain. Anti-cancer drugs such as loperamide and doxorubicin bound to nanomaterials have been shown to cross the intact blood-brain barrier and released at therapeutic concentrations in the brain. The use of nanomaterials including peptide-based nanotubes to target the vascular endothelial growth factor (VEGF receptor and cell adhesion molecules like integrins, cadherins and selectins, is a new approach to control disease progression.

The development of a learning management system for dental radiology education: A technical report

Energy Technology Data Exchange (ETDEWEB)

Chang, Hee Jin; Huh, Kyung Hoe; Yi, Won Jin; Heo, Min Suk; Lee, Sam Sun; Choi, Soon Chul [Dept. of Oral and Maxillofacial Radiology and Dental Research Institute, School of Dentistry, Seoul National University, Seoul (Korea, Republic of); Symkhampha, Khanthaly [Div. of Oral and Maxillofacial Radiology, Dept. of Basic Science, Faculty of Dentistry, University of Health Sciences, Vientiane (Lao People' s Democratic Republic)

2017-03-15

This study was conducted to suggest the development of a learning management system for dental radiology education using the Modular Object-Oriented Dynamic Learning Environment (Moodle). Moodle is a well-known and verified open-source software-learning management system (OSS-LMS). The Moodle software was installed on a server computer and customized for dental radiology education. The system was implemented for teaching undergraduate students to diagnose dental caries in panoramic images. Questions were chosen that could assess students' diagnosis ability. Students were given several questions corresponding to each of 100 panoramic images. The installation and customization of Moodle was feasible, cost-effective, and time-saving. By having students answer questions repeatedly, it was possible to train them to examine panoramic images sequentially and thoroughly. Based on its educational efficiency and efficacy, the adaptation of an OSS-LMS in dental school may be highly recommended. The system could be extended to continuing education for dentists. Further studies on the objective evaluation of knowledge acquisition and retention are needed.

The development of a learning management system for dental radiology education: A technical report.

Science.gov (United States)

Chang, Hee-Jin; Symkhampha, Khanthaly; Huh, Kyung-Hoe; Yi, Won-Jin; Heo, Min-Suk; Lee, Sam-Sun; Choi, Soon-Chul

2017-03-01

This study was conducted to suggest the development of a learning management system for dental radiology education using the Modular Object-Oriented Dynamic Learning Environment (Moodle). Moodle is a well-known and verified open-source software-learning management system (OSS-LMS). The Moodle software was installed on a server computer and customized for dental radiology education. The system was implemented for teaching undergraduate students to diagnose dental caries in panoramic images. Questions were chosen that could assess students' diagnosis ability. Students were given several questions corre-sponding to each of 100 panoramic images. The installation and customization of Moodle was feasible, cost-effective, and time-saving. By having students answer questions repeatedly, it was possible to train them to examine panoramic images sequentially and thoroughly. Based on its educational efficiency and efficacy, the adaptation of an OSS-LMS in dental school may be highly recommended. The system could be extended to continuing education for dentists. Further studies on the objective evaluation of knowledge acquisition and retention are needed.

[Associated costs with dental studies in a public Mexican university].

Science.gov (United States)

Medina-Solís, Carlo Eduardo; Medina-Solís, June Janette; Sánchez-de la Cruz, Alicia; Ascencio-Villagrán, Arturo; de la Rosa-Santillana, Rubén; Mendoza-Rodríguez, Martha; Maupomé, Gerardo

2014-01-01

To calculate associated costs with dental studies (ACDS) in a public university. We performed a cross-sectional study using a costing system on a random sample of 376 dental students enrolled at any semester in a public university. To calculate ACDS (Mexican pesos of 2009-1), we used a questionnaire divided into eight sections. Sociodemographic and socioeconomic variables, housing costs, food, transportation, instruments and equipment, as well as remunerations associated with patient care along 16 weeks of classes in each semester were included. We used linear regression. The average of ACDS was of 18,357.54 ± 12,746.81 Mexican pesos. The largest percentage of ACDS (30.2 %) was for clinical instruments (5,537.66 ± 6,260.50). Students also spent funds in paying to patients for their time during care delivered (2,402.11 ± 4,796.50). Associated variables (p 〈 0.001) with the ACDS were having completed at least one clinical course or one theoretical-practical course, living within the state or out of state (compared to students who live in the city where dental studies take place), and being enrolled in the more advanced dental studies. The results indicate that a significant percentage of the cost to students (13.1 %) is related with clinical care delivery.

Resistive-wall Wake Effect in the Beam Delivery System

International Nuclear Information System (INIS)

Delayen, J.R.; Jefferson Lab; Wu, Juhao; Raubenheimer, T.O.; SLAC; Wang, Jiunn-Ming; BNL, NSLS

2005-01-01

General formulae for resistive-wall induced beam dilution are presented and then applied to the final beam delivery system of linear colliders. Criteria for the design of final beam delivery systems are discussed

Application of dental nanomaterials: potential toxicity to the central nervous system.

Science.gov (United States)

Feng, Xiaoli; Chen, Aijie; Zhang, Yanli; Wang, Jianfeng; Shao, Longquan; Wei, Limin

2015-01-01

Nanomaterials are defined as materials with one or more external dimensions with a size of 1-100 nm. Such materials possess typical nanostructure-dependent properties (eg, chemical, biological, optical, mechanical, and magnetic), which may differ greatly from the properties of their bulk counterparts. In recent years, nanomaterials have been widely used in the production of dental materials, particularly in light polymerization composite resins and bonding systems, coating materials for dental implants, bioceramics, endodontic sealers, and mouthwashes. However, the dental applications of nanomaterials yield not only a significant improvement in clinical treatments but also growing concerns regarding their biosecurity. The brain is well protected by the blood-brain barrier (BBB), which separates the blood from the cerebral parenchyma. However, in recent years, many studies have found that nanoparticles (NPs), including nanocarriers, can transport through the BBB and locate in the central nervous system (CNS). Because the CNS may be a potential target organ of the nanomaterials, it is essential to determine the neurotoxic effects of NPs. In this review, possible dental nanomaterials and their pathways into the CNS are discussed, as well as related neurotoxicity effects underlying the in vitro and in vivo studies. Finally, we analyze the limitations of the current testing methods on the toxicological effects of nanomaterials. This review contributes to a better understanding of the nano-related risks to the CNS as well as the further development of safety assessment systems.

Biomimetics in drug delivery systems: A critical review.

Science.gov (United States)

Sheikhpour, Mojgan; Barani, Leila; Kasaeian, Alibakhsh

2017-05-10

Today, the advanced drug delivery systems have been focused on targeted drug delivery fields. The novel drug delivery is involved with the improvement of the capacity of drug loading in drug carriers, cellular uptake of drug carriers, and the sustained release of drugs within target cells. In this review, six groups of therapeutic drug carriers including biomimetic hydrogels, biomimetic micelles, biomimetic liposomes, biomimetic dendrimers, biomimetic polymeric carriers and biomimetic nanostructures, are studied. The subject takes advantage of the biomimetic methods of productions or the biomimetic techniques for the surface modifications, similar to what accrues in natural cells. Moreover, the effects of these biomimetic approaches for promoting the drug efficiency in targeted drug delivery are visible. The study demonstrates that the fabrication of biomimetic nanocomposite drug carriers could noticeably promote the efficiency of drugs in targeted drug delivery systems. Copyright © 2017 Elsevier B.V. All rights reserved.

Advanced techniques and armamentarium for dental local anesthesia.

Science.gov (United States)

Clark, Taylor M; Yagiela, John A

2010-10-01

Computer-controlled local anesthetic delivery (C-CLAD) devices and systems for intraosseous (IO) injection are important additions to the dental anesthesia armamentarium. C-CLAD using slow infusion rates can significantly reduce the discomfort of local anesthetic infusion, especially in palatal tissues, and facilitate palatal approaches to pulpal nerve block that find special use in cosmetic dentistry, periodontal therapy, and pediatric dentistry. Anesthesia of single teeth can be obtained using either C-CLAD intraligamentary injections or IO injections. Supplementary IO anesthesia is particularly suited for providing effective pain control of teeth diagnosed with irreversible pulpitis. Copyright © 2010 Elsevier Inc. All rights reserved.

Iontophoresis: A Potential Emergence of a Transdermal Drug Delivery System

Science.gov (United States)

Dhote, Vinod; Bhatnagar, Punit; Mishra, Pradyumna K.; Mahajan, Suresh C.; Mishra, Dinesh K.

2012-01-01

The delivery of drugs into systemic circulation via skin has generated much attention during the last decade. Transdermal therapeutic systems propound controlled release of active ingredients through the skin and into the systemic circulation in a predictive manner. Drugs administered through these systems escape first-pass metabolism and maintain a steady state scenario similar to a continuous intravenous infusion for up to several days. However, the excellent impervious nature of the skin offers the greatest challenge for successful delivery of drug molecules by utilizing the concepts of iontophoresis. The present review deals with the principles and the recent innovations in the field of iontophoretic drug delivery system together with factors affecting the system. This delivery system utilizes electric current as a driving force for permeation of ionic and non-ionic medications. The rationale behind using this technique is to reversibly alter the barrier properties of skin, which could possibly improve the penetration of drugs such as proteins, peptides and other macromolecules to increase the systemic delivery of high molecular weight compounds with controlled input kinetics and minimum inter-subject variability. Although iontophoresis seems to be an ideal candidate to overcome the limitations associated with the delivery of ionic drugs, further extrapolation of this technique is imperative for translational utility and mass human application. PMID:22396901

Delivery systems for antimicrobial peptides

DEFF Research Database (Denmark)

Nordström, Randi; Malmsten, Martin

2017-01-01

Due to rapidly increasing resistance development against conventional antibiotics, finding novel approaches for the treatment of infections has emerged as a key health issue. Antimicrobial peptides (AMPs) have attracted interest in this context, and there is by now a considerable literature...... on the identification such peptides, as well as on their optimization to reach potent antimicrobial and anti-inflammatory effects at simultaneously low toxicity against human cells. In comparison, delivery systems for antimicrobial peptides have attracted considerably less interest. However, such delivery systems...... are likely to play a key role in the development of potent and safe AMP-based therapeutics, e.g., through reducing chemical or biological degradation of AMPs either in the formulation or after administration, by reducing adverse side-effects, by controlling AMP release rate, by promoting biofilm penetration...

Dose reference levels in Spanish intraoral dental radiology: stabilisation of the incorporation of digital systems in dental clinical practices

International Nuclear Information System (INIS)

Alcaraz, M.; Velasco, F.; Olivares, A.; Velasco, E.; Canteras, M.

2016-01-01

A total of 34 044 official quality assurance reports in dental radiodiagnostic surgery from 16 regions of Spain, compiled from 2002 to 2014, were studied in order to determine the progress of diagnostic reference levels (DRLs) for obtaining diagnostic images under normal conditions for clinical practice in Spanish dental clinics. A DRL of 2.8 mGy was set in 2014, which represents a 41.7 % decrease compared with that of 2002 (4.8 mGy). Over the same time period, the mean dose fell by 55.2 %. However, over the last 3 y, the stabilisation of the mean dose administered to patients has been observed with only a 6.7 % reduction in DRLs, which corresponds to the stabilisation of dental radiodiagnostic surgery on replacing the use of radiographic film with digital imaging systems. (authors)

[Formulation aspects and ex-vivo examination of buccal drug delivery systems].

Science.gov (United States)

Szabó, Barnabás; Hetényi, Gergely; Majoros, Klaudia; Miszori, Veronika; Kállai, Nikolett; Zelkó, Romána

2011-01-01

Application of buccal dosage forms has several advantages. Buccal route can be used for systemic delivery because the mucosa has a rich blood supply and it is relatively permeable. This route of drug delivery is of special advantages, including the bypass of first pass effect and the avoidance of presystemic elimination within the GIT. Buccal delivery systems enable the systemic delivery of peptides and proteins. In our previous study the physiological background of this application and the excipients of the possible formulations were reviewed. In the present work the formulation and ex vivo examination aspects of buccal drug delivery systems are summarized.

A REVIEW ON OSMOTIC DRUG DELIVERY SYSTEM

OpenAIRE

Harnish Patel; Upendra Patel; Hiren Kadikar; Bhavin Bhimani; Dhiren Daslaniya; Ghanshyam Patel

2012-01-01

Conventional oral drug delivery systems supply an instantaneous release of drug, which cannot control the release of the drug and effective concentration at the target site. This kind of dosing pattern may result in constantly changing, unpredictable plasma concentrations. Drugs can be delivered in a controlled pattern over a long period of time by the process of osmosis. Osmotic devices are the most promising strategy based systems for controlled drug delivery. They are the most reliable con...

[Periodontal disease, tobacco and preterm delivery].

Science.gov (United States)

Resende, Marta; Pinto, Elisabete; Pinto, Miguel; Montenegro, Nuno

2011-12-01

Preterm delivery is associated with high mortality and morbility perinatal, being the costs dispended by the family and the National Health System with preterm newborns extremely high. However, it has been difficult to reduce its incidence due to the various factors involved. There is scientific evidence which support the relationship between periodontal disease and preterm delivery. There is also evidence of tobacco as a risk factor for periodontal disease, even though the relationship with preterm delivery is not yet clear. The aims of our study were to evaluate, in women in a post-partum period, dental and periodontal status as well as the exposure to tobacco and to establish the relationship between these two factors with preterm delivery. We performed a case control study with 237 parturient women from the Department of Obstetrics and Gynecology of Hospital S. João, E.P.E., during the first 48 hours after birth. A total of 86 gave birth at a gestational age under 37 weeks (case group ) and 151 gave birth to term newborns with birthweight equal or superior 2500 g (control group). The prevalence of some indicators of periodontal disease in the studied population was extremely high, namely gingival inflammation and gingival recession, and more of 30% had values of probing depth equal or higher than 4 mm significantly. Based on these periodontal indicators, only the presence of recession in more than two teeth seems to increase the risk of preterm delivery in fivefold (OR = 5,28; IC95%: 1,63-17,04). There is a statistically significant association between probing depth equal or higher than 4mm and smoking during pregnancy. This association might be relevant because 20% of preterm newborns mothers smoked during pregnancy and the proportion that stopped smoking during pregnancy in this group of mothers was almost half of the number of the control group. Therefore it is necessary to embody the information about this thematic in the health education, not only in

Drug delivery systems and materials for wound healing applications.

Science.gov (United States)

Saghazadeh, Saghi; Rinoldi, Chiara; Schot, Maik; Kashaf, Sara Saheb; Sharifi, Fatemeh; Jalilian, Elmira; Nuutila, Kristo; Giatsidis, Giorgio; Mostafalu, Pooria; Derakhshandeh, Hossein; Yue, Kan; Swieszkowski, Wojciech; Memic, Adnan; Tamayol, Ali; Khademhosseini, Ali

2018-04-05

Chronic, non-healing wounds place a significant burden on patients and healthcare systems, resulting in impaired mobility, limb amputation, or even death. Chronic wounds result from a disruption in the highly orchestrated cascade of events involved in wound closure. Significant advances in our understanding of the pathophysiology of chronic wounds have resulted in the development of drugs designed to target different aspects of the impaired processes. However, the hostility of the wound environment rich in degradative enzymes and its elevated pH, combined with differences in the time scales of different physiological processes involved in tissue regeneration require the use of effective drug delivery systems. In this review, we will first discuss the pathophysiology of chronic wounds and then the materials used for engineering drug delivery systems. Different passive and active drug delivery systems used in wound care will be reviewed. In addition, the architecture of the delivery platform and its ability to modulate drug delivery are discussed. Emerging technologies and the opportunities for engineering more effective wound care devices are also highlighted. Copyright © 2018 Elsevier B.V. All rights reserved.

Improvement of different vaccine delivery systems for cancer therapy

Directory of Open Access Journals (Sweden)

Safaiyan Shima

2011-01-01

Full Text Available Abstract Cancer vaccines are the promising tools in the hands of the clinical oncologist. Many tumor-associated antigens are excellent targets for immune therapy and vaccine design. Optimally designed cancer vaccines should combine the best tumor antigens with the most effective immunotherapy agents and/or delivery strategies to achieve positive clinical results. Various vaccine delivery systems such as different routes of immunization and physical/chemical delivery methods have been used in cancer therapy with the goal to induce immunity against tumor-associated antigens. Two basic delivery approaches including physical delivery to achieve higher levels of antigen production and formulation with microparticles to target antigen-presenting cells (APCs have demonstrated to be effective in animal models. New developments in vaccine delivery systems will improve the efficiency of clinical trials in the near future. Among them, nanoparticles (NPs such as dendrimers, polymeric NPs, metallic NPs, magnetic NPs and quantum dots have emerged as effective vaccine adjuvants for infectious diseases and cancer therapy. Furthermore, cell-penetrating peptides (CPP have been known as attractive carrier having applications in drug delivery, gene transfer and DNA vaccination. This review will focus on the utilization of different vaccine delivery systems for prevention or treatment of cancer. We will discuss their clinical applications and the future prospects for cancer vaccine development.

Oral controlled release drug delivery system and Characterization of oral tablets; A review

Directory of Open Access Journals (Sweden)

Muhammad Zaman

2016-01-01

Full Text Available Oral route of drug administration is considered as the safest and easiest route of drug administration. Control release drug delivery system is the emerging trend in the pharmaceuticals and the oral route is most suitable for such kind of drug delivery system. Oral route is more convenient for It all age group including both pediatric and geriatrics. There are various systems which are adopted to deliver drug in a controlled manner to different target sites through oral route. It includes diffusion controlled drug delivery systems; dissolution controlled drug delivery systems, osmotically controlled drug delivery systems, ion-exchange controlled drug delivery systems, hydrodynamically balanced systems, multi-Particulate drug delivery systems and microencapsulated drug delivery system. The systems are formulated using different natural, semi-synthetic and synthetic polymers. The purpose of the review is to provide information about the orally controlled drug delivery system, polymers which are used to formulate these systems and characterizations of one of the most convenient dosage form which is the tablets. 

Broadly Applicable Nanowafer Drug Delivery System for Treating Eye Injuries

Science.gov (United States)

2015-09-01

Systems in Systemic , Dermal, Transdermal , and Ocular Drug Delivery . Crit. Rev. Ther. Drug 2008, 25, 545–584. 14. Choy, Y. B.; Park, J.-H.; McCarey, B...AWARD NUMBER: W81XWH-13-1-0146 TITLE: Broadly Applicable Nanowafer Drug Delivery System for Treating Eye Injuries PRINCIPAL INVESTIGATOR: Dr...Broadly Applicable Nanowafer Drug Delivery System for Treating Eye Injuries” 5b. GRANT NUMBER W81XWH-13-1-0146 5c. PROGRAM ELEMENT NUMBER 6

Chitosan microspheres in novel drug delivery systems.

Science.gov (United States)

Mitra, Analava; Dey, Baishakhi

2011-07-01

The main aim in the drug therapy of any disease is to attain the desired therapeutic concentration of the drug in plasma or at the site of action and maintain it for the entire duration of treatment. A drug on being used in conventional dosage forms leads to unavoidable fluctuations in the drug concentration leading to under medication or overmedication and increased frequency of dose administration as well as poor patient compliance. To minimize drug degradation and loss, to prevent harmful side effects and to increase drug bioavailability various drug delivery and drug targeting systems are currently under development. Handling the treatment of severe disease conditions has necessitated the development of innovative ideas to modify drug delivery techniques. Drug targeting means delivery of the drug-loaded system to the site of interest. Drug carrier systems include polymers, micelles, microcapsules, liposomes and lipoproteins to name some. Different polymer carriers exert different effects on drug delivery. Synthetic polymers are usually non-biocompatible, non-biodegradable and expensive. Natural polymers such as chitin and chitosan are devoid of such problems. Chitosan comes from the deacetylation of chitin, a natural biopolymer originating from crustacean shells. Chitosan is a biocompatible, biodegradable, and nontoxic natural polymer with excellent film-forming ability. Being of cationic character, chitosan is able to react with polyanions giving rise to polyelectrolyte complexes. Hence chitosan has become a promising natural polymer for the preparation of microspheres/nanospheres and microcapsules. The techniques employed to microencapsulate with chitosan include ionotropic gelation, spray drying, emulsion phase separation, simple and complex coacervation. This review focuses on the preparation, characterization of chitosan microspheres and their role in novel drug delivery systems.

Renewable energy delivery systems and methods

Science.gov (United States)

Walker, Howard Andrew

2013-12-10

A system, method and/or apparatus for the delivery of energy at a site, at least a portion of the energy being delivered by at least one or more of a plurality of renewable energy technologies, the system and method including calculating the load required by the site for the period; calculating the amount of renewable energy for the period, including obtaining a capacity and a percentage of the period for the renewable energy to be delivered; comparing the total load to the renewable energy available; and, implementing one or both of additional and alternative renewable energy sources for delivery of energy to the site.

Injectable In-Situ Gelling Controlled Release Drug Delivery System

OpenAIRE

Kulwant Singh; S. L. HariKumar

2012-01-01

The administration of poorly bioavailable drug through parenteral route is regarded the most efficient for drug delivery. Parenteral delivery provides rapid onset even for the drug with narrow therapeutic window, but to maintain the systemic drug level repeated installation are required which cause the patient discomfort. This can be overcome by designing the drug into a system, which control the drug release even through parenteral delivery, which improve patient compliance as well as pharma...

Nano materials for Medical and Dental Applications

International Nuclear Information System (INIS)

Yub Kwon, T.; Oh, D.S.; Narayanan, R.

2015-01-01

Welcome to this special issue. Nano science and nano technology concepts are applicable across all fields of science and a more widespread application of nano materials and nano technologies is imminent or already occurring in many areas, including health care. Today is scientists take those cutting-edge technologies and concepts and apply them to medicine and dentistry. They are finding a wide variety of ways to make medical and dental materials at the nano scale to take advantage of their enhanced physical and biological properties.The purpose of this special issue is to publish high-quality research papers as well as review articles addressing recent advances in the field of nano materials for medical and dental applications. A particular interest is given to papers exploring or discussing nano materials and nano technologies related to delivery system, bonding substitutes, and surface modification techniques applicable in these areas. For this special issue, several investigators were invited to contribute original research findings that can stimulate continuing efforts to understand the cutting-edge applications of nano materials in medicine and dentistry.

Handheld Delivery System for Modified Boron-Type Fire Extinguishment Agent

Science.gov (United States)

1993-11-01

was to develop and test a handheld portable delivery system for use with the modified boron-type fire extinguishing agent for metal fires . B...BACKGROUND A need exists for an extinguishing agent and accompanying delivery system that are effective against complex geometry metal fires . A modified...agent and its delivery system have proven effective against complex geometry metal fires containing up to 200 pounds of magnesium metal. Further

Does use of an electronic health record with dental diagnostic system terminology promote dental students' critical thinking?

Science.gov (United States)

Reed, Susan G; Adibi, Shawn S; Coover, Mullen; Gellin, Robert G; Wahlquist, Amy E; AbdulRahiman, Anitha; Hamil, Lindsey H; Walji, Muhammad F; O'Neill, Paula; Kalenderian, Elsbeth

2015-06-01

The Consortium for Oral Health Research and Informatics (COHRI) is leading the way in use of the Dental Diagnostic System (DDS) terminology in the axiUm electronic health record (EHR). This collaborative pilot study had two aims: 1) to investigate whether use of the DDS terms positively impacted predoctoral dental students' critical thinking skills measured by the Health Sciences Reasoning Test (HSRT), and 2) to refine study protocols. The study design was a natural experiment with cross-sectional data collection using the HSRT for 15 classes (2013-17) of students at three dental schools. Characteristics of students who had been exposed to the DDS terms were compared with students who had not, and the differences were tested by t-tests or chi-square tests. Generalized linear models were used to evaluate the relationship between exposure and outcome on the overall critical thinking score. The results showed that exposure was significantly related to overall score (p=0.01), with not-exposed students having lower mean overall scores. This study thus demonstrated a positive impact of using the DDS terminology in an EHR on the critical thinking skills of predoctoral dental students in three COHRI schools as measured by their overall score on the HSRT. These preliminary findings support future research to further evaluate a proposed model of critical thinking in clinical dentistry.

Does Use of an Electronic Health Record with Dental Diagnostic System Terminology Promote Dental Students’ Critical Thinking?

Science.gov (United States)

Reed, Susan G.; Adibi, Shawn S.; Coover, Mullen; Gellin, Robert G.; Wahlquist, Amy E.; AbdulRahiman, Anitha; Hamil, Lindsey H.; Walji, Muhammad F.; O’Neill, Paula; Kalenderian, Elsbeth

2015-01-01

The Consortium for Oral Health Research and Informatics (COHRI) is leading the way in use of the Dental Diagnostic System (DDS) terminology in the axiUm electronic health record (EHR). This collaborative pilot study had two aims: 1) to investigate whether use of the DDS terms positively impacted predoctoral dental students’ critical thinking skills measured by the Health Sciences Reasoning Test (HSRT), and 2) to refine study protocols. The study design was a natural experiment with cross-sectional data collection using the HSRT for 15 classes (2013–17) of students at three dental schools. Characteristics of students who had been exposed to the DDS terms were compared with students who had not, and the differences were tested by t-tests or chi-square tests. Generalized linear models were used to evaluate the relationship between exposure and outcome on the overall critical thinking score. The results showed that exposure was significantly related to overall score (p=0.01), with not-exposed students having lower mean overall scores. This study thus demonstrated a positive impact of using the DDS terminology in an EHR on the critical thinking skills of predoctoral dental students in three COHRI schools as measured by their overall score on the HSRT. These preliminary findings support future research to further evaluate a proposed model of critical thinking in clinical dentistry. PMID:26034034

Characterization of particulate drug delivery systems for oral delivery of Peptide and protein drugs

DEFF Research Database (Denmark)

Christophersen, Philip Carsten; Fano, Mathias; Saaby, Lasse

2015-01-01

Oral drug delivery is a preferred route because of good patient compliance. However, most peptide/ protein drugs are delivered via parenteral routes because of the absorption barriers in the gastrointestinal (GI) tract such as enzymatic degradation by proteases and low permeability acrossthe...... delivery of peptide/protein drugs and to provide an overview of formulationand characterization strategies. For a better understanding of the challenges in oral delivery of peptide/protein drugs, the composition of GI fluids and the digestion processes of different kinds of excipients in the GI tract...... biological membranes. To overcome these barriers, different formulation strategies for oral delivery of biomacromolecules have been proposed, including lipid based formulations and polymer-based particulate drug delivery systems (DDS). The aim of this review is to summarize the existing knowledge about oral...

Controlled drug delivery systems towards new frontiers in patient care

CERN Document Server

Rossi, Filippo; Masi, Maurizio

2016-01-01

This book offers a state-of-the-art overview of controlled drug delivery systems, covering the most important innovative applications. The principles of controlled drug release and the mechanisms involved in controlled release are clearly explained. The various existing polymeric drug delivery systems are reviewed, and new frontiers in material design are examined in detail, covering a wide range of polymer modification techniques. The concluding chapter is a case study focusing on use of a drug-eluting stent. The book is designed to provide the reader with a complete understanding of the mechanisms and design of controlled drug delivery systems, and to this end includes numerous step-by-step tutorials. It illustrates how chemical engineers can advance medical care by designing polymeric delivery systems that achieve either temporal or spatial control of drug delivery and thus ensure more effective therapy that eliminates the potential for both under-and overdosing.

Printing technologies in fabrication of drug delivery systems.

Science.gov (United States)

Kolakovic, Ruzica; Viitala, Tapani; Ihalainen, Petri; Genina, Natalja; Peltonen, Jouko; Sandler, Niklas

2013-12-01

There has been increased activity in the field recently regarding the development and research on various printing techniques in fabrication of dosage forms and drug delivery systems. These technologies may offer benefits and flexibility in manufacturing, potentially paving the way for personalized dosing and tailor-made dosage forms. In this review, the most recent observations and advancements in fabrication of drug delivery systems by utilizing printing technologies are summarized. A general overview of 2D printing techniques is presented including a review of the most recent literature where printing techniques are used in fabrication of drug delivery systems. The future perspectives and possible impacts on formulation strategies, flexible dosing and personalized medication of using printing techniques for fabrication of drug delivery systems are discussed. It is evident that there is an urgent need to meet the challenges of rapidly growing trend of personalization of medicines through development of flexible drug-manufacturing approaches. In this context, various printing technologies, such as inkjet and flexography, can play an important role. Challenges on different levels exist and include: i) technological development of printers and production lines; ii) printable formulations and carrier substrates; iii) quality control and characterization; and iv) regulatory perspectives.

Model for determining and optimizing delivery performance in industrial systems

Directory of Open Access Journals (Sweden)

Fechete Flavia

2017-01-01

Full Text Available Performance means achieving organizational objectives regardless of their nature and variety, and even overcoming them. Improving performance is one of the major goals of any company. Achieving the global performance means not only obtaining the economic performance, it is a must to take into account other functions like: function of quality, delivery, costs and even the employees satisfaction. This paper aims to improve the delivery performance of an industrial system due to their very low results. The delivery performance took into account all categories of performance indicators, such as on time delivery, backlog efficiency or transport efficiency. The research was focused on optimizing the delivery performance of the industrial system, using linear programming. Modeling the delivery function using linear programming led to obtaining precise quantities to be produced and delivered each month by the industrial system in order to minimize their transport cost, satisfying their customers orders and to control their stock. The optimization led to a substantial improvement in all four performance indicators that concern deliveries.

Utilization of debate as an educational tool to learn health economics for dental students in Malaysia.

Science.gov (United States)

Khan, Saad A; Omar, Hanan; Babar, Muneer Gohar; Toh, Chooi G

2012-12-01

Health economics, a special branch of science applying economic principles to the health delivery system, is a relatively young subdiscipline. The literature is scanty about teaching health economics in the medical and dental fields. Delivery methods of this topic vary from one university to another, with lectures, seminars, and independent learning reported as teaching/learning tools used for the topic. Ideally, debates should foster the development of logical reasoning and communication skills. Health economics in dentistry is taught under the community oral health module that constitutes part of an outcome-based dental curriculum in a private dental school in Kuala Lumpur, Malaysia. For this study, the students were divided into two groups: active participants (active debaters) and supporting participants (nonactive debaters). The debate style chosen for this activity was parliamentary style. Active and nonactive debaters' perceptions were evaluated before and after the activity through a structured questionnaire using a five-point rating scale addressing the topic and perceptions about debate as an educational tool. Cronbach's alpha coefficient was used as a measure of internal consistency for the questionnaire items. Among a total of eighty-two third-year dental students of two successive cohorts (thirty-eight students and forty-four students), seventy-three completed the questionnaire, yielding a response rate of 89 percent. Students' responses to the questionnaire were analyzed with the Kruskal-Wallis analysis of variance test. Results revealed that the students felt that their interest in debate, knowledge of the topic, and reinforcement of the previous knowledge had improved following participation in the debate. Within the limitations of this study, it can be concluded that debate was a useful tool in teaching health economics to dental students.

Disparities in unmet dental need and dental care received by pregnant women in Maryland.

Science.gov (United States)

Singhal, Astha; Chattopadhyay, Amit; Garcia, A Isabel; Adams, Amy B; Cheng, Diana

2014-09-01

To examine prenatal dental care needs, utilization and oral health counseling among Maryland women who delivered a live infant during 2001-2003 and identify the factors associated with having a dental visit and having an unmet dental need during pregnancy. Pregnancy Risk Assessment Monitoring System is an ongoing population based surveillance system that collects information of women's attitudes and experiences before, during, and shortly after pregnancy. Logistic regression was used to model dental visits and unmet dental need using predictor variables for Maryland 2001-2003 births. Less than half of all women reported having a dental visit and receiving oral health advice during pregnancy. Twenty-five percent of women reported a need for dental care, of which 33 % did not receive dental care despite their perceived need. Multivariate modeling revealed that racial minorities, women who were not married and those with annual income dental visit. Women who were not married, had low annual income, were older than 40 years of age, had an unintended pregnancy and received prenatal care later than desired were most likely to have an unmet dental need during pregnancy. Despite reported needs and existing recommendations to include oral health as a component of prenatal care, less than half of pregnant women have a dental visit during their pregnancy. One-third of women with a dental problem did not have a dental visit highlighting the unmet need for dental care during pregnancy.

Servir: an automated document delivery system

International Nuclear Information System (INIS)

Lima, E.C.; Azevedo Coutinho, O.C. de

1986-01-01

SERVIR, an automated document delivery system developed by CIN/CNEN, is described. Parametric procedures for reading bibliographic data bases and requesting documents from libraries through computer are specified. Statistical procedures, accounting system and the on-line fulfillment of requests are presented. (Author) [pt

Recent trends in drug delivery system using protein nanoparticles.

Science.gov (United States)

Sripriyalakshmi, S; Jose, Pinkybel; Ravindran, Aswathy; Anjali, C H

2014-09-01

Engineered nanoparticles that can facilitate drug formulation and passively target tumours have been under extensive research in recent years. These successes have driven a new wave of significant innovation in the generation of advanced particles. The fate and transport of diagnostic nanoparticles would significantly depend on nonselective drug delivery, and hence the use of high drug dosage is implemented. In this perspective, nanocarrier-based drug targeting strategies can be used which improve the selective delivery of drugs to the site of action, i.e. drug targeting. Pharmaceutical industries majorly focus on reducing the toxicity and side effects of drugs but only recently it has been realised that carrier systems themselves may pose risks to the patient. Proteins are compatible with biological systems and they are biodegradable. They offer a multitude of moieties for modifications to tailor drug binding, imaging or targeting entities. Thus, protein nanoparticles provide outstanding contributions as a carrier for drug delivery systems. This review summarises recent progress in particle-based therapeutic delivery and discusses important concepts in particle design and biological barriers for developing the next generation of particles drug delivery systems.

Direct assessment as a measure of institutional effectiveness in a dental hygiene distance education program.

Science.gov (United States)

Olmsted, Jodi L

2014-10-01

This ten-year, longitudinal examination of a dental hygiene distance education (DE) program considered student performance on standard benchmark assessments as direct measures of institutional effectiveness. The aim of the study was to determine if students face-to-face in a classroom with an instructor performed differently from their counterparts in a DE program, taking courses through the alternative delivery system of synchronous interactive television (ITV). This study used students' grade point averages and National Board Dental Hygiene Examination scores to assess the impact of ITV on student learning, filling a crucial gap in current evidence. The study's research population consisted of 189 students who graduated from one dental hygiene program between 1997 and 2006. One hundred percent of the institution's data files for these students were used: 117 students were face-to-face with the instructor, and seventy-two received instruction through the ITV system. The results showed that, from a year-by-year perspective, no statistically significant performance differences were apparent between the two student groups when t-tests were used for data analysis. The DE system examined was considered effective for delivering education if similar performance outcomes were the evaluation criteria used for assessment.

Grizzli mobile systems and LPG delivery management; Grizzli mobile systems

Energy Technology Data Exchange (ETDEWEB)

Anon.

2000-07-01

Complete text of publication follows: Grizzli Mobile Systems (and its sister companies) specialists in data communications and system solutions, offer their complete management solution for LPG deliveries, right through from remote reading of the gas level in the tank, through route management, management of the delivery itself and finally on-site invoicing and payment. The system permits a supplier to really differentiate itself from its competitors in terms of customer service and control of its operations. Domestic gas tanks are often difficult to access; visual reading of the gauge is not always easy and often leads to the customer re-ordering in panic mode. The supplier has also to react in panic mode to the customer. Grizzli Mobile Systems has developed a radio module that is fitted to the gas tank that calls, at regular set intervals with the tank level to a Call Rider gateway plug. The Call Rider is a small box plugged into the regular telephone socket (also supplying multiple operator telephony and other home automation services). As soon as the gas level reaches a predetermined minimum level, this radio information is relayed via the Internet to the LPG supplier. The supplier can then arrange (in non-panic mode) to deliver gas to the customer, via conventional means or by use of an interactive radio display (attached to a refrigerator or similar by magnets) that communicates with the Call Rider by radio. Once a delivery date has been set, a Grizzli Mobile Systems' dispatch system, installed at the supplier's headquarters creates and transfers routes via GSM communications to its fleet of delivery vehicles. A main-frame mapping software provides real-time follow-up and status checks of the vehicles using the GPS functionality and imports data back from the vehicles and updates databases. The driver is also assisted in localizing delivery sites. Inside the cabin of the vehicle the driver has available a Fujitsu PenCentra pen computer, a Microsoft

A Novel Nonviral Gene Delivery System: Multifunctional Envelope-Type Nano Device

Science.gov (United States)

Hatakeyama, Hiroto; Akita, Hidetaka; Kogure, Kentaro; Harashima, Hideyoshi

In this review we introduce a new concept for developing a nonviral gene delivery system which we call "Programmed Packaging." Based on this concept, we succeeded in developing a multifunctional envelope-type nano device (MEND), which exerts high transfection activities equivalent to those of an adenovirus in a dividing cell. The use of MEND has been extended to in vivo applications. PEG/peptide/DOPE ternary conjugate (PPD)-MEND, a new in vivo gene delivery system for the targeting of tumor cells that dissociates surface-modified PEG in tumor tissue by matrix metalloproteinase (MMP) and exerts significant transfection activities, was developed. In parallel with the development of MEND, a quantitative gene delivery system, Confocal Image-assisted 3-dimensionally integrated quantification (CIDIQ), also was developed. This method identified the rate-limiting step of the nonviral gene delivery system by comparing it with adenoviral-mediated gene delivery. The results of this analysis provide a new direction for the development of rational nonviral gene delivery systems.

Guidelines for Psychological Practice in Health Care Delivery Systems

Science.gov (United States)

American Psychologist, 2013

2013-01-01

Psychologists practice in an increasingly diverse range of health care delivery systems. The following guidelines are intended to assist psychologists, other health care providers, administrators in health care delivery systems, and the public to conceptualize the roles and responsibilities of psychologists in these diverse contexts. These…

Healing of large periapical lesions following delivery of dental stem cells with an injectable scaffold: New method and three case reports

Directory of Open Access Journals (Sweden)

Vahab Shiehzadeh

2014-01-01

Full Text Available Regenerative endodontics is the creation and delivery of tissues to replace diseased, missing, and traumatized pulp. A call for a paradigm shift and new protocol for the clinical management of these cases has been brought to attention. These regenerative endodontic techniques will possibly involve some combination of disinfection or debridement of infected root canal systems with apical enlargement to permit revascularization and use of stem cells, scaffolds, and growth factors. Mesenchymal stem cells (MSCs have been isolated from the pulp tissue of permanent teeth (dental pulp stem cells (DPSCs and deciduous teeth (stem cells from human exfoliated deciduous teeth. Stem cells are characterized as multipotent cells for regeneration.These three case reports describe the treatment of necrotic or immature teeth with periradicular periodontitis, which was not treated with conventional apexification techniques. All cases presented here developed mature apices and bone healing after 3 to 4 months after the initial treatment without complications, and faster than traditional treatments. Our clinical observations support a shifting paradigm toward a biologic approach by providing a favorable environment for tissue regeneration. The mechanism of this continued development and formation of the root end and faster tissue healing is discussed.

A mucoadhesive in situ gel delivery system for paclitaxel

OpenAIRE

Jauhari, Saurabh; Dash, Alekha K.

2006-01-01

MUC1 gene encodes a transmembrane mucin glycoprotein that is overexpressed in human breast cancer and colon cancer. The objective of this study was to develop an in situ gel delivery system containing paclitaxel (PTX) and mucoadhesives for sustained and targeted delivery of anticancer drugs. The delivery system consisted of chitosan and glyceryl monooleate (GMO) in 0.33M citric acid containing PTX. The in vitro release of PTX from the gel was performed in presence and absence of Tween 80 at d...

Interpenetrating Polymer Networks as Innovative Drug Delivery Systems

Directory of Open Access Journals (Sweden)

Alka Lohani

2014-01-01

Full Text Available Polymers have always been valuable excipients in conventional dosage forms, also have shown excellent performance into the parenteral arena, and are now capable of offering advanced and sophisticated functions such as controlled drug release and drug targeting. Advances in polymer science have led to the development of several novel drug delivery systems. Interpenetrating polymer networks (IPNs have shown superior performances over the conventional individual polymers and, consequently, the ranges of applications have grown rapidly for such class of materials. The advanced properties of IPNs like swelling capacity, stability, biocompatibility, nontoxicity and biodegradability have attracted considerable attention in pharmaceutical field especially in delivering bioactive molecules to the target site. In the past few years various research reports on the IPN based delivery systems showed that these carriers have emerged as a novel carrier in controlled drug delivery. The present review encompasses IPNs, their types, method of synthesis, factors which affects the morphology of IPNs, extensively studied IPN based drug delivery systems, and some natural polymers widely used for IPNs.

Biomaterial-based drug delivery systems for the controlled release of neurotrophic factors

International Nuclear Information System (INIS)

Mohtaram, Nima Khadem; Montgomery, Amy; Willerth, Stephanie M

2013-01-01

This review highlights recent work on the use of biomaterial-based drug delivery systems to control the release of neurotrophic factors as a potential strategy for the treatment of neurological disorders. Examples of neurotrophic factors include the nerve growth factor, the glial cell line-derived neurotrophic factor, the brain-derived neurotrophic factor and neurotrophin-3. In particular, this review focuses on two methods of drug delivery: affinity-based and reservoir-based systems. We review the advantages and challenges associated with both types of drug delivery system and how these systems can be applied to neurological diseases and disorders. While a limited number of affinity-based delivery systems have been developed for the delivery of neurotrophic factors, we also examine the broad spectrum of reservoir-based delivery systems, including microspheres, electrospun nanofibers, hydrogels and combinations of these systems. Finally, conclusions are drawn about the current state of such drug delivery systems as applied to neural tissue engineering along with some thoughts on the future direction of the field. (topical review)

Dental PACS development in Korea

International Nuclear Information System (INIS)

Kim, Eun Kyung

2008-01-01

Picture archiving and communication system (PACS) is an image information technology system for the transmission and storage of medical images. In Korea the first full PACS was installed at Samsung Medical Center in 1994, but, the rate of distribution was very slow. The government's approval for the medical insurance reimbursement for full PACS examinations in November 1999 became the turning point. Thereafter the number of hospitals with full PACS has steeply increased. In September of this year, PACS was installed at 906 medical institutes, including most of university hospitals and general hospitals. The first full dental PACS was installed at Wonkwang University Dental Hospital in 2002. Now ten out of eleven university dental hospitals implemented full dental PACS. The current status and technological factors of dental PACS in Korean university dental hospitals and the future perspectives of dental PACS are described.

Dental education in Peru.

Science.gov (United States)

Komabayashi, Takashi; Sato, Manuel; Rodiguez, Lyly; Sato, Doris; Bird, William F

2008-09-01

This paper provides information about Peru's dental history and dental school system, including the curriculum and dental licensure. With the increase in the number of dental schools in Peru, the number of dentists is also increasing. Until 1965, Peru had only three dental schools; currently, there are 14. Four of these dental schools are public, and ten are private. A five- or six-year dental program leads to the B.D.S. degree. After successful completion of a thesis defense or competency examination, the D.D.S. degree is awarded. The D.D.S. is mandatory for practicing dentistry in Peru. Currently, there are approximately 14,000 active dentists, with a dentist-patient ratio of approximately 1:2,000.

Carrier-Based Drug Delivery System for Treatment of Acne

Science.gov (United States)

Vyas, Amber; Kumar Sonker, Avinesh

2014-01-01

Approximately 95% of the population suffers at some point in their lifetime from acne vulgaris. Acne is a multifactorial disease of the pilosebaceous unit. This inflammatory skin disorder is most common in adolescents but also affects neonates, prepubescent children, and adults. Topical conventional systems are associated with various side effects. Novel drug delivery systems have been used to reduce the side effect of drugs commonly used in the topical treatment of acne. Topical treatment of acne with active pharmaceutical ingredients (API) makes direct contact with the target site before entering the systemic circulation which reduces the systemic side effect of the parenteral or oral administration of drug. The objective of the present review is to discuss the conventional delivery systems available for acne, their drawbacks, and limitations. The advantages, disadvantages, and outcome of using various carrier-based delivery systems like liposomes, niosomes, solid lipid nanoparticles, and so forth, are explained. This paper emphasizes approaches to overcome the drawbacks and limitations associated with the conventional system and the advances and application that are poised to further enhance the efficacy of topical acne formulations, offering the possibility of simplified dosing regimen that may improve treatment outcomes using novel delivery system. PMID:24688376

A new primary dental care service compared with standard care for child and family to reduce the re-occurrence of childhood dental caries (Dental RECUR): study protocol for a randomised controlled trial.

Science.gov (United States)

Pine, Cynthia; Adair, Pauline; Burnside, Girvan; Robinson, Louise; Edwards, Rhiannon Tudor; Albadri, Sondos; Curnow, Morag; Ghahreman, Marjan; Henderson, Mary; Malies, Clare; Wong, Ferranti; Muirhead, Vanessa; Weston-Price, Sally; Whitehead, Hilary

2015-11-04

In England and Scotland, dental extraction is the single highest cause of planned admission to the hospital for children under 11 years. Traditional dental services have had limited success in reducing this disease burden. Interventions based on motivational interviewing have been shown to impact positively dental health behaviours and could facilitate the prevention of re-occurrence of dental caries in this high-risk population. The objective of the study is to evaluate whether a new, dental nurse-led service, delivered using a brief negotiated interview based on motivational interviewing, is a more cost-effective service than treatment as usual, in reducing the re-occurrence of dental decay in young children with previous dental extractions. This 2-year, two-arm, multicentre, randomised controlled trial will include 224 child participants, initially aged 5 to 7 years, who are scheduled to have one or more primary teeth extracted for dental caries under general anaesthesia (GA), relative analgesia (RA: inhalation sedation) or local anaesthesia (LA). The trial will be conducted in University Dental Hospitals, Secondary Care Centres or other providers of dental extraction services across the United Kingdom. The intervention will include a brief negotiated interview (based on the principles of motivational interviewing) delivered between enrollment and 6 weeks post-extraction, followed by directed prevention in primary dental care. Participants will be followed up for 2 years. The main outcome measure will be the dental caries experienced by 2 years post-enrollment at the level of dentine involvement on any tooth in either dentition, which had been caries-free at the baseline assessment. The participants are a hard-to-reach group in which secondary prevention is a challenge. Lack of engagement with dental care makes the children and their families scheduled for extraction particularly difficult to recruit to an RCT. Variations in service delivery between sites have

Controlled release of metronidazole from composite poly-ε-caprolactone/alginate (PCL/alginate) rings for dental implants.

Science.gov (United States)

Lan, Shih-Feng; Kehinde, Timilehin; Zhang, Xiangming; Khajotia, Sharukh; Schmidtke, David W; Starly, Binil

2013-06-01

Dental implants provide support for dental crowns and bridges by serving as abutments for the replacement of missing teeth. To prevent bacterial accumulation and growth at the site of implantation, solutions such as systemic antibiotics and localized delivery of bactericidal agents are often employed. The objective of this study was to demonstrate a novel method of controlled localized delivery of antibacterial agents to an implant site using a biodegradable custom fabricated ring. The study involved incorporating a model antibacterial agent (metronidazole) into custom designed poly-ε-caprolactone/alginate (PCL/alginate) composite rings to produce the intended controlled release profile. The rings can be designed to fit around the body of any root form dental implants of various diameters, shapes and sizes. In vitro release studies indicate that pure (100%) alginate rings exhibited an expected burst release of metronidazole in the first few hours, whereas Alginate/PCL composite rings produced a medium burst release followed by a sustained release for a period greater than 4 weeks. By varying the PCL/alginate weight ratios, we have shown that we can control the amount of antibacterial agents released to provide the minimal inhibitory concentration (MIC) needed for adequate protection. The fabricated composite rings have achieved a 50% antibacterial agent release profile over the first 48 h and the remaining amount slowly released over the remainder of the study period. The PCL/alginate agent release characteristic fits the Ritger-Peppas model indicating a diffusion-based mechanism during the 30-day study period. The developed system demonstrates a controllable drug release profile and the potential for the ring to inhibit bacterial biofilm growth for the prevention of diseases such as peri-implantitis resulting from bacterial infection at the implant site. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Systemic gene delivery to the central nervous system using Adeno-associated virus

Directory of Open Access Journals (Sweden)

Mathieu eBOURDENX

2014-06-01

Full Text Available Adeno-associated virus (AAV-mediated gene delivery has emerged as an effective and safe tool for both preclinical and clinical studies of neurological disorders. The recent discovery that several serotypes are able to cross the blood-brain-barrier when administered systemically has been a real breakthrough in the field of neurodegenerative diseases. Widespread transgene expression after systemic injection could spark interest as a therapeutic approach. Such strategy will avoid invasive brain surgery and allow non-focal gene therapy promising for CNS diseases affecting large portion of the brain. Here, we will review the recent results achieved through different systemic routes of injection generated in the last decade using systemic AAV-mediated delivery and propose a brief assessment of their values. In particular, we emphasize how the methods used for virus engineering could improve brain transduction after peripheral delivery.

Lipid nanoparticles as drug/gene delivery systems to the retina.

Science.gov (United States)

del Pozo-Rodríguez, Ana; Delgado, Diego; Gascón, Alicia R; Solinís, Maria Ángeles

2013-03-01

This review highlights the application of lipid nanoparticles (Solid Lipid Nanoparticles, Nanostructured Lipid Carriers, or Lipid Drug Conjugates) as effective drug/gene delivery systems for retinal diseases. Most drug products for ocular disease treatment are marketed as eye drop formulations but, due to ocular barriers, the drug concentration in the retina hardly ever turns out to be effective. Up to this date, several delivery systems have been designed to deliver drugs to the retina. Drug delivery strategies may be classified into 3 groups: noninvasive techniques, implants, and colloidal carriers. The best known systems for drug delivery to the posterior eye are intravitreal implants; in fact, some of them are being clinically used. However, their long-term accumulation might impact the patient's vision. On the contrary, colloidal drug delivery systems (microparticles, liposomes, or nanoparticles) can be easily administered in a liquid form. Nanoparticular systems diffuse rapidly and are better internalized in ocular tissues than microparticles. In comparison with liposomes, nanoparticles have a higher loading capacity and are more stable in biological fluids and during storage. In addition, their capacity to adhere to the ocular surface and interact with the endothelium makes these drug delivery systems interesting as new therapeutic tools in ophthalmology. Within the group of nanoparticles, those composed of lipids (Solid Lipid Nanoparticles, Nanostructred Lipid Carriers, and Lipid Drug Conjugates) are more biocompatible, easy to produce at large scale, and they may be autoclaved or sterilized. The present review summarizes scientific results that evidence the potential application of lipid nanoparticles as drug delivery systems for the retina and also as nonviral vectors in gene therapy of retina disorders, although much more effort is still needed before these lipidic systems could be available in the market.

Effect of moisture on dental enamel in the interaction of two orthodontic bonding systems.

Science.gov (United States)

Bertoz, André Pinheiro de Magalhães; de Oliveira, Derly Tescaro Narcizo; Gimenez, Carla Maria Melleiro; Briso, André Luiz Fraga; Bertoz, Francisco Antonio; Santos, Eduardo César Almada

2013-01-01

The purpose of this study was to assess by means of scanning electron microscopy (SEM) the remaining adhesive interface after debonding orthodontic attachments bonded to bovine teeth with the use of hydrophilic and hydrophobic primers under different dental substrate moisture conditions. Twenty mandibular incisors were divided into four groups (n = 5). In Group I, bracket bonding was performed with Transbond MIP hydrophilic primer and Transbond XT adhesive paste applied to moist substrate, and in Group II a bonding system comprising Transbond XT hydrophobic primer and adhesive paste was applied to moist substrate. Brackets were bonded to the specimens in Groups III and IV using the same adhesive systems, but on dry dental enamel. The images were qualitatively assessed by SEM. The absence of moisture in etched enamel enabled better interaction between bonding materials and the adamantine structure. The hydrophobic primer achieved the worst micromechanical interlocking results when applied to a moist dental structure, whereas the hydrophilic system proved versatile, yielding acceptable results in moist conditions and excellent interaction in the absence of contamination. The authors assert that the best condition for the application of primers to dental enamel occurs in the absence of moisture.

Dental Providers’ Perspectives on Diagnosis-Driven Dentistry: Strategies to Enhance Adoption of Dental Diagnostic Terminology

Science.gov (United States)

Obadan-Udoh, Enihomo; Etolue, Jini; Tokede, Oluwabunmi; White, Joel; Spallek, Heiko; Walji, Muhammad; Kalenderian, Elsbeth

2017-01-01

The routine use of standardized diagnostic terminologies (DxTMs) in dentistry has long been the subject of academic debate. This paper discusses the strategies suggested by a group of dental stakeholders to enhance the uptake of DxTMs. Through unstructured interviewing at the ‘Toward a Diagnosis-Driven Profession’ National Conference held on 19 March 2016 in Los Angeles, CA, USA participants were asked how enthusiastic they were about implementing and consistently using DxTMs at their work. They also brainstormed on strategies to improve the widespread use of DxTMs. Their responses are summarized by recursive abstraction and presented in themes. Conference participants were very enthusiastic about using a DxTM in their place of work. Participants enumerated several strategies to make DxTMs more appealing including: the use of mandates, a value proposition for providers, communication and education, and integration with EHRs and existing systems. All groups across the dental healthcare delivery spectrum will need to work together for the success of the widespread and consistent use of DxTMs. Understanding the provider perspective is however the most critical step in achieving this goal, as they are the group who will ultimately be saddled with the critical task of ensuring DxTM use at the point of care. PMID:28703751

Dental Providers' Perspectives on Diagnosis-Driven Dentistry: Strategies to Enhance Adoption of Dental Diagnostic Terminology.

Science.gov (United States)

Obadan-Udoh, Enihomo; Simon, Lisa; Etolue, Jini; Tokede, Oluwabunmi; White, Joel; Spallek, Heiko; Walji, Muhammad; Kalenderian, Elsbeth

2017-07-13

The routine use of standardized diagnostic terminologies (DxTMs) in dentistry has long been the subject of academic debate. This paper discusses the strategies suggested by a group of dental stakeholders to enhance the uptake of DxTMs. Through unstructured interviewing at the 'Toward a Diagnosis-Driven Profession' National Conference held on 19 March 2016 in Los Angeles, CA, USA participants were asked how enthusiastic they were about implementing and consistently using DxTMs at their work. They also brainstormed on strategies to improve the widespread use of DxTMs. Their responses are summarized by recursive abstraction and presented in themes. Conference participants were very enthusiastic about using a DxTM in their place of work. Participants enumerated several strategies to make DxTMs more appealing including: the use of mandates, a value proposition for providers, communication and education, and integration with EHRs and existing systems. All groups across the dental healthcare delivery spectrum will need to work together for the success of the widespread and consistent use of DxTMs. Understanding the provider perspective is however the most critical step in achieving this goal, as they are the group who will ultimately be saddled with the critical task of ensuring DxTM use at the point of care.

Frequency of dental caries in active and inactive systemic lupus erythematous patients: salivary and bacterial factors.

Science.gov (United States)

Loyola Rodriguez, J P; Galvan Torres, L J; Martinez Martinez, R E; Abud Mendoza, C; Medina Solis, C E; Ramos Coronel, S; Garcia Cortes, J O; Domínguez Pérez, R A

2016-10-01

The objective of this study was to determine dental caries frequency and to analyze salivary and bacterial factors associated with active and inactive systemic lupus erythematous (SLE) patients. Also, a proposal to identify dental caries by a surface, teeth, and the patient was developed. A cross-sectional, blinded study that included 60 SLE patients divided into two groups of 30 subjects each, according to the Activity Index for Diagnosis of Systemic Lupus Erythematous (SLEDAI). The decayed, missing, and filled teeth (DMFT) index and Integrative Dental Caries Index (IDCI) were used for analyzing dental caries. The saliva variables recorded were: flow, pH, and buffer capacity. The DNA copies of Streptococcus mutans and Streptococcus sobrinus were estimated by real-time PCR. The caries frequency was 85% for SLE subjects (73.3% for inactive systemic lupus erythematous (ISLE) and 100% for active systemic lupus erythematous (ASLE)); DMFT for the SLE group was 12.6 ± 5.7 and the IDCI was (9.8 ± 5.9). The ASLE group showed a salivary flow of 0.65 compared with 0.97 ml/1 min from the ISLE group; all variables mentioned above showed a statistical difference (p dental caries in epidemiological studies. © The Author(s) 2016.

Progress and Challenges in Developing Aptamer-Functionalized Targeted Drug Delivery Systems

Directory of Open Access Journals (Sweden)

Feng Jiang

2015-10-01

Full Text Available Aptamers, which can be screened via systematic evolution of ligands by exponential enrichment (SELEX, are superior ligands for molecular recognition due to their high selectivity and affinity. The interest in the use of aptamers as ligands for targeted drug delivery has been increasing due to their unique advantages. Based on their different compositions and preparation methods, aptamer-functionalized targeted drug delivery systems can be divided into two main categories: aptamer-small molecule conjugated systems and aptamer-nanomaterial conjugated systems. In this review, we not only summarize recent progress in aptamer selection and the application of aptamers in these targeted drug delivery systems but also discuss the advantages, challenges and new perspectives associated with these delivery systems.

Education About Dental Hygienists' Roles in Public Dental Prevention Programs: Dental and Dental Hygiene Students' and Faculty Members' and Dental Hygienists' Perspectives.

Science.gov (United States)

Pervez, Anushey; Kinney, Janet S; Gwozdek, Anne; Farrell, Christine M; Inglehart, Marita R

2016-09-01

In 2005, Public Act No. 161 (PA 161) was passed in Michigan, allowing dental hygienists to practice in approved public dental prevention programs to provide services for underserved populations while utilizing a collaborative agreement with a supervising dentist. The aims of this study were to assess how well dental and dental hygiene students and faculty members and practicing dental hygienists have been educated about PA 161, what attitudes and knowledge about the act they have, and how interested they are in additional education about it. University of Michigan dental and dental hygiene students and faculty members, students in other Michigan dental hygiene programs, and dental hygienists in the state were surveyed. Respondents (response rate) were 160 dental students (50%), 63 dental hygiene students (82%), 30 dental faculty members (26%), and 12 dental hygiene faculty members (52%) at the University of Michigan; 143 dental hygiene students in other programs (20%); and 95 members of the Michigan Dental Hygienists' Association (10%). The results showed that the dental students were less educated about PA 161 than the dental hygiene students, and the dental faculty members were less informed than the dental hygiene faculty members and dental hygienists. Responding dental hygiene faculty members and dental hygienists had more positive attitudes about PA 161 than did the students and dental faculty members. Most of the dental hygiene faculty members and dental hygienists knew a person providing services in a PA 161 program. Most dental hygiene students, faculty members, and dental hygienists wanted more education about PA 161. Overall, the better educated about the program the respondents were, the more positive their attitudes, and the more interested they were in learning more.

Microcontainers - an oral drug delivery system for poorly soluble drugs

DEFF Research Database (Denmark)

Nielsen, Line Hagner; Petersen, Ritika Singh; Marizza, Paolo

In oral delivery, it can sometimes be necessary to employ drug delivery systems to achieve targeted delivery to the intestine. Microcontainers are polymeric, cylindrical devices in the micrometer size range (Figure 1), and are suggested as a promising oral drug delivery system [1],[2]. The purpose...... of these studies was to fabricate microcontainers in either SU-8 or biodegradable poly-L-lactic acid (PLLA), and fill the microcontainers with poorly soluble drugs. Furthermore, the application of the microcontainers as an oral drug delivery system was investigated in terms of release, in situ intestinal perfusion...... medium at pH 6.5 was observed. In situ intestinal perfusions were performed in rats of the Eudragit-coated ASSF-filled microcontainers and compared to a furosemide solution. At the end of the study, the small intestine was harvested from the rat and imaged under a light microscope. The absorption rate...

The Impact Of Dental Auxiliaries In Oral Health Delivery In Cameroon

African Journals Online (AJOL)

treat 6-10 patients per day while 13 (29.5%) of respondents work without any direct supervision. Out of ... the training and job description of dental auxiliaries in Cameroon. Introduction .... A Textbook for Preventive and. Community Dentistry.

Advanced and controlled drug delivery systems in clinical disease management

NARCIS (Netherlands)

Brouwers, JRBJ

1996-01-01

Advanced and controlled drug delivery systems are important for clinical disease management. In this review the most important new systems which have reached clinical application are highlighted. Microbiologically controlled drug delivery is important for gastrointestinal diseases like ulcerative

Commissioning of cryogen delivery system for superconducting cyclotron magnet

International Nuclear Information System (INIS)

Pal, G.; Nandi, C.; Bhattacharyya, T.K.; Chaudhuri, J.; Bhandari, R.K.

2005-01-01

A K-500 superconducting cyclotron is being constructed at VECC Kolkata. The cryogen delivery system distributes liquid helium and liquid nitrogen to the superconducting cyclotron. Liquid helium is required to cool the cyclotron magnet and cryopanels. Liquid nitrogen is used to reduce the capacity of the helium liquefier. This paper describes the system, the current status and the commissioning experiences of cryogen delivery system for cyclotron magnet. (author)

Awareness of dental surgeons in Pune and Mumbai, India, regarding chemomechanical caries removal system.

Science.gov (United States)

Bijle, Mohammed Nadeem Ahmed; Patil, Shankargouda; Mumkekar, Shahzad S; Arora, Nitin; Bhalla, Monika; Murali, K V

2013-01-01

To evaluate awareness of dental surgeons in Pune and Mumbai, India regarding chemomechanical caries removal system (CMCR). Sixty practicing dental surgeons from Mumbai (30) and Pune (30) were surveyed using questionnaire. Qualitative data was collected on the basis of structured schedule questionnaire method. Statistical analysis was done using SPSS v. 12.0. To test statistical significance, Chi-square test, Fishers exact test and Mann-Whitney U test were used. Of total respondents, 46.7% dental surgeons in Pune and 13.3% in Mumbai were aware about CMCR products. Carisolv® was known to 57.1% of dental surgeons in Pune and 75% in Mumbai, whereas, Papacarie® was known to 28.6% of dentists in Pune and none in Mumbai among the respondents aware about CMCR products. A significantly higher proportion of dental surgeons from Pune were aware about CMCR products compared to Mumbai. Dental surgeons from Mumbai were unaware about Papacarie®. Almost equal proportion of Dentists from Mumbai and Pune would like to undergo CDE programs to seek knowledge on CMCR, particularly Papacarie®.

Nanostructured lipid carriers system: recent advances in drug delivery.

Science.gov (United States)

Iqbal, Md Asif; Md, Shadab; Sahni, Jasjeet Kaur; Baboota, Sanjula; Dang, Shweta; Ali, Javed

2012-12-01

Nanostructured lipid carrier (NLC) is second generation smarter drug carrier system having solid matrix at room temperature. This carrier system is made up of physiological, biodegradable and biocompatible lipid materials and surfactants and is accepted by regulatory authorities for application in different drug delivery systems. The availability of many products in the market in short span of time reveals the success story of this delivery system. Since the introduction of the first product, around 30 NLC preparations are commercially available. NLC exhibit superior advantages over other colloidal carriers viz., nanoemulsions, polymeric nanoparticles, liposomes, SLN etc. and thus, have been explored to more extent in pharmaceutical technology. The whole set of unique advantages such as enhanced drug loading capacity, prevention of drug expulsion, leads to more flexibility for modulation of drug release and makes NLC versatile delivery system for various routes of administration. The present review gives insights on the definitions and characterization of NLC as colloidal carriers including the production techniques and suitable formulations. This review paper also highlights the importance of NLC in pharmaceutical applications for the various routes of drug delivery viz., topical, oral, pulmonary, ocular and parenteral administration and its future perspective as a pharmaceutical carrier.

Nebuliser systems for drug delivery in cystic fibrosis.

Science.gov (United States)

Daniels, Tracey; Mills, Nicola; Whitaker, Paul

2013-04-30

Nebuliser systems are used to deliver medications to control the symptoms and the progression of lung disease in people with cystic fibrosis. Many types of nebuliser systems are available for use with various medications; however, there has been no previous systematic review which has evaluated these systems. To evaluate effectiveness, safety, burden of treatment and adherence to nebulised therapy using different nebuliser systems for people with cystic fibrosis. We searched the Cochrane Cystic Fibrosis and Genetic Disorders Group Trials Register comprising references identified from comprehensive electronic database searches, handsearching of relevant journals and abstract books of conference proceedings. We searched the reference lists of each study for additional publications and approached the manufacturers of both nebuliser systems and nebulised medications for published and unpublished data. Date of the most recent search: 15 Oct 2012. Randomised controlled trials or quasi-randomised controlled trials comparing nebuliser systems including conventional nebulisers, vibrating mesh technology systems, adaptive aerosol delivery systems and ultrasonic nebuliser systems. Two authors independently assessed studies for inclusion. They also independently extracted data and assessed the risk of bias. A third author assessed studies where agreement could not be reached. The search identified 40 studies with 20 of these (1936 participants) included in the review. These studies compared the delivery of tobramycin, colistin, dornase alfa, hypertonic sodium chloride and other solutions through the different nebuliser systems. This review demonstrates variability in the delivery of medication depending on the nebuliser system used. Conventional nebuliser systems providing higher flows, higher respirable fractions and smaller particles decrease treatment time, increase deposition and may be preferred by people with CF, as compared to conventional nebuliser systems providing

Delivery systems and local administration routes for therapeutic siRNA.

Science.gov (United States)

Vicentini, Fabiana Testa Moura de Carvalho; Borgheti-Cardoso, Lívia Neves; Depieri, Lívia Vieira; de Macedo Mano, Danielle; Abelha, Thais Fedatto; Petrilli, Raquel; Bentley, Maria Vitória Lopes Badra

2013-04-01

With the increasing number of studies proposing new and optimal delivery strategies for the efficacious silencing of gene-related diseases by the local administration of siRNAs, the present review aims to provide a broad overview of the most important and latest developments of non-viral siRNA delivery systems for local administration. Moreover, the main disease targets for the local delivery of siRNA to specific tissues or organs, including the skin, the lung, the eye, the nervous system, the digestive system and the vagina, were explored.

Spray-on transdermal drug delivery systems.

Science.gov (United States)

Ibrahim, Sarah A

2015-02-01

Transdermal drug delivery possesses superior advantages over other routes of administration, particularly minimizing first-pass metabolism. Transdermal drug delivery is challenged by the barrier nature of skin. Numerous technologies have been developed to overcome the relatively low skin permeability, including spray-on transdermal systems. A transdermal spray-on system (TSS) usually consists of a solution containing the drug, a volatile solvent and in many cases a chemical penetration enhancer. TSS promotes drug delivery via the complex interplay between solvent evaporation and drug-solvent drag into skin. The volatile solvent carries the drug into the upper layers of the stratum corneum, and as the volatile solvent evaporates, an increase in the thermodynamic activity of the drug occurs resulting in an increased drug loading in skin. TSS is easily applied, delivering flexible drug dosage and associated with lower incidence of skin irritation. TSS provides a fast-drying product where the volatile solvent enables uniform drug distribution with minimal vehicle deposition on skin. TSS ensures precise dose administration that is aesthetically appealing and eliminates concerns of residual drug associated with transdermal patches. Furthermore, it provides a better alternative to traditional transdermal products due to ease of product development and manufacturing.

Nanotechnology in dentistry: drug delivery systems for the control of biofilm-dependent oral diseases.

Science.gov (United States)

de Sousa, Francisco Fabio Oliveira; Ferraz, Camila; Rodrigues, Lidiany K Arla de Azevedo; Nojosa, Jacqueline de Santiago; Yamauti, Monica

2014-01-01

Dental disorders, such as caries, periodontal and endodontic diseases are major public health issues worldwide. In common, they are biofilm-dependent oral diseases, and the specific conditions of oral cavity may develop infectious foci that could affect other physiological systems. Efforts have been made to develop new treatment routes for the treatment of oral diseases, and therefore, for the prevention of some systemic illnesses. New drugs and materials have been challenged to prevent and treat these conditions, especially by means of bacteria elimination. "Recent progresses in understanding the etiology, epidemiology and microbiology of the microbial flora in those circumstances have given insight and motivated the innovation on new therapeutic approaches for the management of the oral diseases progression". Some of the greatest advances in the medical field have been based in nanosized systems, ranging from the drug release with designed nanoparticles to tissue scaffolds based on nanotechnology. These systems offer new possibilities for specific and efficient therapies, been assayed successfully in preventive/curative therapies to the oral cavity, opening new challenges and opportunities to overcome common diseases based on bacterial biofilm development. The aim of this review is to summarize the recent nanotechnological developments in the drug delivery field related to the prevention and treatment of the major biofilm-dependent oral diseases and to identify those systems, which may have higher potential for clinical use.

Otic drug delivery systems: formulation principles and recent developments.

Science.gov (United States)

Liu, Xu; Li, Mingshuang; Smyth, Hugh; Zhang, Feng

2018-04-25

Disorders of the ear severely impact the quality of life of millions of people, but the treatment of these disorders is an ongoing, but often overlooked challenge particularly in terms of formulation design and product development. The prevalence of ear disorders has spurred significant efforts to develop new therapeutic agents, but perhaps less innovation has been applied to new drug delivery systems to improve the efficacy of ear disease treatments. This review provides a brief overview of physiology, major diseases, and current therapies used via the otic route of administration. The primary focuses are on the various administration routes and their formulation principles. The article also presents recent advances in otic drug deliveries as well as potential limitations. Otic drug delivery technology will likely evolve in the next decade and more efficient or specific treatments for ear disease will arise from the development of less invasive drug delivery methods, safe and highly controlled drug delivery systems, and biotechnology targeting therapies.

3-dimensional orthodontics visualization system with dental study models and orthopantomograms

Science.gov (United States)

Zhang, Hua; Ong, S. H.; Foong, K. W. C.; Dhar, T.

2005-04-01

The aim of this study is to develop a system that provides 3-dimensional visualization of orthodontic treatments. Dental plaster models and corresponding orthopantomogram (dental panoramic tomogram) are first digitized and fed into the system. A semi-auto segmentation technique is applied to the plaster models to detect the dental arches, tooth interstices and gum margins, which are used to extract individual crown models. 3-dimensional representation of roots, generated by deforming generic tooth models with orthopantomogram using radial basis functions, is attached to corresponding crowns to enable visualization of complete teeth. An optional algorithm to close the gaps between deformed roots and actual crowns by using multi-quadratic radial basis functions is also presented, which is capable of generating smooth mesh representation of complete 3-dimensional teeth. User interface is carefully designed to achieve a flexible system with as much user friendliness as possible. Manual calibration and correction is possible throughout the data processing steps to compensate occasional misbehaviors of automatic procedures. By allowing the users to move and re-arrange individual teeth (with their roots) on a full dentition, this orthodontic visualization system provides an easy and accurate way of simulation and planning of orthodontic treatment. Its capability of presenting 3-dimensional root information with only study models and orthopantomogram is especially useful for patients who do not undergo CT scanning, which is not a routine procedure in most orthodontic cases.

Safety design integrated in the building delivery system

DEFF Research Database (Denmark)

Jørgensen, Kirsten

2013-01-01

. The purpose of this article is to demonstrate how safety and health can be integrated in the design phases integrated in the management delivery systems within construction, The method for the research was to go through the building delivery system step by step and create a normative description of what, when......In construction, it is important to view safety and health as an integrated part of the way that “designers” are working. The designers cowers architects, constructors, engineers and others who carry out their consulting services in the design phase of a construction project. The philosophy...... and how to fully integrate safety in each part of the process. The result is a concept and guideline including control forms for how to integrate safety design in the Building Delivery System plus what to do and when. The concept has been tested in an educational context. The practical value...

Pharmacokinetics of a 5-fluorouracil liposomal delivery system.

Science.gov (United States)

Simmons, S T; Sherwood, M B; Nichols, D A; Penne, R B; Sery, T; Spaeth, G L

1988-01-01

A liposomal delivery system was developed in an attempt to prolong ocular levels of 5-fluorouracil for glaucoma filtering surgery. The pharmacokinetics of the 5-fluorouracil liposomal delivery system were studied in normal pigmented rabbits with 5-fluorouracil labelled with carbon-14 (C-14). 14C 5-fluorouracil was incorporated into the liposomes at a concentration of 10 g/l and injected subconjunctivally in doses of 5 and 10 mg. Concentrations of 5-fluorouracil were assayed at 10 time intervals from 0.5 to 96 hours in cornea, sclera, and conjunctiva and at six time intervals from 0.5 to 12 hours in aqueous. Two peak concentrations were noted at approximately one and eight hours, with measurable levels present at 96 hours. This study demonstrates the ability of this liposomal delivery system to prolong levels of 5-fluorouracial in normal pigmented rabbits. PMID:3179257

Safety design integrated in the Building Delivery System

DEFF Research Database (Denmark)

Jørgensen, Kirsten

2012-01-01

phases of the building delivery system by using the principle of the lean construction modelling. The method for the research was to go through the lean construction building delivery system step by step and create a normative description of what to do, when to do and how to do to fully integration...... of safety in each process. The group of participants who created the description had a high experience in a combination of research, safety and health in general and especial in construction and knowledge of the lean construction processes both from the clients perspective as well as from the designers...... and the consultants. The result is a concept and guideline including control schemes for how to integrate safety design in the lean construction building delivery system including what to do and when. The concept has been tested in an educational context and found useful by the designers. The practical value...

Considerations for services from dental technicians in fabrication of fixed prostheses: A survey of commercial dental laboratories in Thessaloniki, Greece.

Science.gov (United States)

Hatzikyriakos, Andreas; Petridis, Haralampos P; Tsiggos, Nikolaos; Sakelariou, Sotirios

2006-11-01

Effective communication and cooperation between dentists and dental technicians are essential in providing quality services. There has been a lack of information regarding dentist-dental technician communications and current methods and materials used for the fabrication of fixed partial dentures (FPDs). This cross-sectional study identified the materials and techniques used for fabrication of FPDs, as well as the status of communication between dentists and dental technicians in Thessaloniki, Greece. A questionnaire was developed with 7 sections pertaining to procedures and materials used for the fabrication of fixed prostheses: general questions, infection control, impressions/interocclusal records, die technique/mounting, information from final casts, prostheses design/materials, and communication/shade selection. The questionnaire was anonymous and distributed by the Association of Dental Technicians of Thessaloniki to all member laboratories (228) in the wider province of Thessaloniki, Greece. Due to the absence of normal distribution of the results, frequencies and medians were reported. Ninety-six of 228 dental laboratories responded (42.1% response rate). Twenty-six percent of dental laboratories did not routinely disinfect incoming items. The dental technicians considered 30% of incoming final impressions and 20% of interocclusal registrations as inadequate. Half of the time (55%) final casts were mounted by technicians on simple hinge articulators. Only 20% of tooth preparations had adequate finish lines. The majority (70%) of fixed restorations were metal-ceramic. Fifty-seven percent of dental technicians considered the delivery time requested by dentists as insufficient. The information provided in this study indicates areas of weakness in communication between dentists and dental technicians, along with areas where both parties should use greater care during clinical and laboratory procedures.

Dental Workforce Availability and Dental Services Utilization in Appalachia: A Geospatial Analysis

Science.gov (United States)

Feng, Xue; Sambamoorthi, Usha; Wiener, R. Constance

2016-01-01

Objectives There is considerable variation in dental services utilization across Appalachian counties, and a plausible explanation is that individuals in some geographical areas do not utilize dental care due to dental workforce shortage. We conducted an ecological study on dental workforce availability and dental services utilization in Appalachia. Methods We derived county-level (n = 364) data on demographic, socio-economic characteristics and dental services utilization in Appalachia from the 2010 Behavioral Risk Factor Surveillance System (BRFSS) using person-level data. We obtained county-level dental workforce availability and physician-to-population ratio estimates from Area Health Resource File, and linked them to the county-level BRFSS data. The dependent variable was the proportion using dental services within the last year in each county (ranging from 16.6% to 91.0%). We described the association between dental workforce availability and dental services utilization using ordinary least squares regression and spatial regression techniques. Spatial analyses consisted of bivariate Local Indicators of Spatial Association (LISA) and geographically weighted regression (GWR). Results Bivariate LISA showed that counties in the central and southern Appalachian regions had significant (p dental workforce availability, low percent dental services utilization). GWR revealed considerable local variations in the association between dental utilization and dental workforce availability. In the multivariate GWR models, 8.5% (t-statistics >1.96) and 13.45% (t-statistics >1.96) of counties showed positive and statistically significant relationships between the dental services utilization and workforce availability of dentists and dental hygienists, respectively. Conclusions Dental workforce availability was associated with dental services utilization in the Appalachian region; however, this association was not statistically significant in all counties. The findings suggest

An Overview of Clinical and Commercial Impact of Drug Delivery Systems

Science.gov (United States)

Anselmo, Aaron C.; Mitragotri, Samir

2014-01-01

Drug delivery systems are widely researched and developed to improve the delivery of pharmaceutical compounds and molecules. The last few decades have seen a marked growth of the field fueled by increased number of researchers, research funding, venture capital and the number of start-ups. Collectively, the growth has led to novel systems that make use of micro/nano-particles, transdermal patches, inhalers, drug reservoir implants and antibody-drug conjugates. While the increased research activity is clearly an indication of proliferation of the field, clinical and commercial translation of early-stage research ideas is critically important for future growth and interest in the field. Here, we will highlight some of the examples of novel drug delivery systems that have undergone such translation. Specifically, we will discuss the developments, advantages, limitations and lessons learned from: (i) microparticle-based depot formulations, (ii) nanoparticle-based cancer drugs, (iii) transdermal systems, (iv) oral drug delivery systems, (v) pulmonary drug delivery, (vi) implants and (vii) antibody-drug conjugates. These systems have impacted treatment of many prevalent diseases including diabetes, cancer and cardiovascular diseases, among others. At the same time, these systems are integral and enabling components of products that collectively generate annual revenues exceeding US $100 billion. These examples provide strong evidence of the clinical and commercial impact of drug delivery systems. PMID:24747160

Adult Dental Anxiety: Recent Assessment Approaches and Psychological Management in a Dental Practice Setting.

Science.gov (United States)

Humphris, Gerry; Spyt, James; Herbison, Alice G; Kelsey, Thomas W

2016-05-01

Dental anxiety of patients is a common feature of the everyday experience of dental practice. This article advocates the use of regular assessment of this psychological construct to assist in patient management. Various tools, such as the Modified Dental Anxiety Scale (MDAS), are available to monitor dental anxiety that are quick to complete and easy to interpret. Patient burden is low. A new mobile phone assessment system (DENTANX) is being developed for distribution. This application and other psychological interventions are being investigated to assist patients to receive dental care routinely. Clinical relevance: This article provides evidence and expert opinion on the worth of regular dental anxiety assessment in dental practice using structured tools, such as the Modified Dental Anxiety Scale, and consideration of psychological intervention development.

Understanding the organization of public health delivery systems: an empirical typology.

Science.gov (United States)

Mays, Glen P; Scutchfield, F Douglas; Bhandari, Michelyn W; Smith, Sharla A

2010-03-01

Policy discussions about improving the U.S. health care system increasingly recognize the need to strengthen its capacities for delivering public health services. A better understanding of how public health delivery systems are organized across the United States is critical to improvement. To facilitate the development of such evidence, this article presents an empirical method of classifying and comparing public health delivery systems based on key elements of their organizational structure. This analysis uses data collected through a national longitudinal survey of local public health agencies serving communities with at least 100,000 residents. The survey measured the availability of twenty core public health activities in local communities and the types of organizations contributing to each activity. Cluster analysis differentiated local delivery systems based on the scope of activities delivered, the range of organizations contributing, and the distribution of effort within the system. Public health delivery systems varied widely in organizational structure, but the observed patterns of variation suggested that systems adhere to one of seven distinct configurations. Systems frequently migrated from one configuration to another over time, with an overall trend toward offering a broader scope of services and engaging a wider range of organizations. Public health delivery systems exhibit important structural differences that may influence their operations and outcomes. The typology developed through this analysis can facilitate comparative studies to identify which delivery system configurations perform best in which contexts.

Buccoadhesive drug delivery systems--extensive review on recent patents.

Science.gov (United States)

Pathan, Shadab A; Iqbal, Zeenat; Sahani, Jasjeet K; Talegaonkar, Sushma; Khar, Roop K; Ahmad, Farhan J

2008-01-01

Peroral administration of drugs, although most preferred by both clinicians and patients has several disadvantages such as hepatic first pass metabolism and enzymatic degradation within the GI tract, that prohibit oral administration of certain classes of drugs especially peptides and proteins. Consequently, other absorptive mucosae are considered as potential sites for administration of these drugs. Among the various transmucosal routes studied the buccal mucosa offers several advantages for controlled drug delivery for extended period of time. The mucosa is well supplied with both vascular and lymphatic drainage and first-pass metabolism in the liver and pre-systemic elimination in the gastrointestinal tract is avoided. The area is well suited for a retentive device and appears to be acceptable to the patient. With the right dosage form, design and formulation, the permeability and the local environment of the mucosa can be controlled and manipulated in order to accommodate drug permeation. Buccal drug delivery is thus a promising area for continued research with the aim of systemic and local delivery of orally inefficient drugs as well as feasible and attractive alternative for non-invasive delivery of potent protein and peptide drug molecules. Extensive review pertaining specifically to the patents relating to buccal drug delivery is currently available. However, many patents e.g. US patents 6, 585,997; US20030059376A1 etc. have been mentioned in few articles. It is the objective of this article to extensively review buccal drug delivery by discussing the recent patents available. Buccal dosage forms will also be reviewed with an emphasis on bioadhesive polymeric based delivery systems.

Hydrogen storage and delivery system development: Analysis

Energy Technology Data Exchange (ETDEWEB)

Handrock, J.L. [Sandia National Labs., Livermore, CA (United States)

1996-10-01

Hydrogen storage and delivery is an important element in effective hydrogen utilization for energy applications and is an important part of the FY1994-1998 Hydrogen Program Implementation Plan. This project is part of the Field Work Proposal entitled Hydrogen Utilization in Internal Combustion Engines (ICE). The goal of the Hydrogen Storage and Delivery System Development Project is to expand the state-of-the-art of hydrogen storage and delivery system design and development. At the foundation of this activity is the development of both analytical and experimental evaluation platforms. These tools provide the basis for an integrated approach for coupling hydrogen storage and delivery technology to the operating characteristics of potential hydrogen energy use applications. Results of the analytical model development portion of this project will be discussed. Analytical models have been developed for internal combustion engine (ICE) hybrid and fuel cell driven vehicles. The dependence of hydride storage system weight and energy use efficiency on engine brake efficiency and exhaust temperature for ICE hybrid vehicle applications is examined. Results show that while storage system weight decreases with increasing engine brake efficiency energy use efficiency remains relatively unchanged. The development, capability, and use of a recently developed fuel cell vehicle storage system model will also be discussed. As an example of model use, power distribution and control for a simulated driving cycle is presented. Model calibration results of fuel cell fluid inlet and exit temperatures at various fuel cell idle speeds, assumed fuel cell heat capacities, and ambient temperatures are presented. The model predicts general increases in temperature with fuel cell power and differences between inlet and exit temperatures, but under predicts absolute temperature values, especially at higher power levels.

Mechanical valve assembly for xenon 133 gas delivery systems

Energy Technology Data Exchange (ETDEWEB)

Round, W.H. (Royal Brisbane Hospital, Herston (Australia))

Some gas delivery systems used in pulmonary ventilation scanning are unable to satisfactorily supply /sup 133/Xe gas to bed-ridden patients. A mechanical gas valve assembly to control the flow of gas in such systems was constructed. A commercially produced /sup 133/Xe gas delivery system when fitted with the new assembly was able to ventilate almost all patients whereas previously this could be achieved with approximately only 50% of patients.

Stabilization challenges and formulation strategies associated with oral biologic drug delivery systems.

Science.gov (United States)

Truong-Le, Vu; Lovalenti, Phillip M; Abdul-Fattah, Ahmad M

2015-10-01

Delivery of proteins to mucosal tissues of GI tract typically utilize formulations which protect against proteolysis and target the mucosal tissues. Using case studies from literature and the authors' own work, the in-process stability and solid state storage stability of biopharmaceuticals formulated in delivery systems designed for oral delivery to the GI tract will be reviewed. Among the range of delivery systems, biodegradable polymer systems for protection and controlled release of proteins have been the most studied; hence these systems will be covered in greater depth. These delivery systems include polymeric biodegradable microspheres or nanospheres that contain proteins or vaccines, which are designed to reduce the number of administrations/inoculations and the total protein dose required to achieve the desired biological effect. Specifically, this review will include a landscape survey of the systems that have been studied, the manufacturing processes involved, stability through the manufacturing process, key pharmaceutical formulation parameters that impact stability of the encased proteins, and storage stability of the encapsulated proteins in these delivery systems. Copyright © 2015 Elsevier B.V. All rights reserved.

Application of three-dimensional printing for colon targeted drug delivery systems.

Science.gov (United States)

Charbe, Nitin B; McCarron, Paul A; Lane, Majella E; Tambuwala, Murtaza M

2017-01-01

Orally administered solid dosage forms currently dominate over all other dosage forms and routes of administrations. However, human gastrointestinal tract (GIT) poses a number of obstacles to delivery of the drugs to the site of interest and absorption in the GIT. Pharmaceutical scientists worldwide have been interested in colon drug delivery for several decades, not only for the delivery of the drugs for the treatment of colonic diseases such as ulcerative colitis and colon cancer but also for delivery of therapeutic proteins and peptides for systemic absorption. Despite extensive research in the area of colon targeted drug delivery, we have not been able to come up with an effective way of delivering drugs to the colon. The current tablets designed for colon drug release depend on either pH-dependent or time-delayed release formulations. During ulcerative colitis the gastric transit time and colon pH-levels is constantly changing depending on whether the patient is having a relapse or under remission. Hence, the current drug delivery system to the colon is based on one-size-fits-all. Fails to effectively deliver the drugs locally to the colon for colonic diseases and delivery of therapeutic proteins and peptides for systemic absorption from the colon. Hence, to overcome the current issues associated with colon drug delivery, we need to provide the patients with personalized tablets which are specifically designed to match the individual's gastric transit time depending on the disease state. Three-dimensional (3D) printing (3DP) technology is getting cheaper by the day and bespoke manufacturing of 3D-printed tablets could provide the solutions in the form of personalized colon drug delivery system. This review provides a bird's eye view of applications and current advances in pharmaceutical 3DP with emphasis on the development of colon targeted drug delivery systems.

Project Delivery System Mode Decision Based on Uncertain AHP and Fuzzy Sets

Science.gov (United States)

Kaishan, Liu; Huimin, Li

2017-12-01

The project delivery system mode determines the contract pricing type, project management mode and the risk allocation among all participants. Different project delivery system modes have different characteristics and applicable scope. For the owners, the selection of the delivery mode is the key point to decide whether the project can achieve the expected benefits, it relates to the success or failure of project construction. Under the precondition of comprehensively considering the influence factors of the delivery mode, the model of project delivery system mode decision was set up on the basis of uncertain AHP and fuzzy sets, which can well consider the uncertainty and fuzziness when conducting the index evaluation and weight confirmation, so as to rapidly and effectively identify the most suitable delivery mode according to project characteristics. The effectiveness of the model has been verified via the actual case analysis in order to provide reference for the construction project delivery system mode.

Drug delivery system and radiation therapy

International Nuclear Information System (INIS)

Shibata, Tokushi

2005-01-01

This paper describes the review of radiation therapy, neutron capture therapy (NCT) and drug delivery system for the latter. In cancer radiation therapy, there are problems of body movement like breathing, needless irradiation of normal tissues, difficulty to decide the correct irradiation position and tumor morphology. NCT has advantages to overcome these, and since boron has a big cross section for thermal neutron, NPT uses the reaction 10 B(n, α) 7 Li in the target cancer which previously incorporated the boron-containing drug. During the period 1966-1996, 246 patients were treated with this in Japan and the treatment has been continued thereafter. The tasks for NCT are developments of drug delivery system efficient to deliver the drug into the tumor and of convenient neutron source like the accelerator. (S.I.)

Systemic Assessment of Patients Undergoing Dental Implant ...

African Journals Online (AJOL)

These days, dental implants are becoming routinely used as a treatment option for rehabilitation of lost teeth. Conventionally, it is only after the completion of bone healing that the dental implants are loaded into the bone. Bone healing time is approximately 3 months and. 6 months for the mandible and maxilla, respectively.

Oral delivery of peptides and proteins using lipid-based drug delivery systems

DEFF Research Database (Denmark)

Li, Ping; Nielsen, Hanne Mørck; Müllertz, Anette

2012-01-01

INTRODUCTION: In order to successfully develop lipid-based drug delivery systems (DDS) for oral administration of peptides and proteins, it is important to gain an understanding of the colloid structures formed by these DDS, the mode of peptide and protein incorporation as well as the mechanism...... by which intestinal absorption of peptides and proteins is promoted. AREAS COVERED: The present paper reviews the literature on lipid-based DDS, employed for oral delivery of peptides and proteins and highlights the mechanisms by which the different lipid-based carriers are expected to overcome the two...... and proteins. EXPERT OPINION: Lipid-based DDS are safe and suitable for oral delivery of peptides and proteins. Significant progress has been made in this area with several technologies on clinical trials. However, a better understanding of the mechanism of action in vivo is needed in order to improve...

Pharmacokinetic characteristics of formulated alendronate transdermal delivery systems in rats and humans.

Science.gov (United States)

Choi, Ahyoung; Gang, Hyesil; Whang, Jiae; Gwak, Hyesun

2010-05-01

The objective of this study was to examine the absorption of alendronate from formulated transdermal delivery systems in rats and humans. When alendronate was applied to rats by transdermal delivery systems (7.2 mg) and oral administration (30 mg/kg), a statistically significant difference was found in the amount remaining to be excreted at time t (Ae(t)) and the amount remaining to be excreted at time 0 (Ae(infinity)) (p transdermal delivery systems. There was a linear relationship (r(2) = 0.9854) between the drug loading dose and Ae(infinity). The Ae(infinity) values from the transdermal delivery system containing 6% caprylic acid (53.8 mg as alendronate) and an oral product (Fosamax), 70 mg as alendronate) in humans were 127.0 +/- 34.2 microg and 237.2 +/- 56.3 microg, respectively. The dose-adjusted relative Ae(infinity) ratio of the transdermal delivery system to oral product was calculated to be 69.7%. The long half-life of alendronate in the transdermal delivery system (50.6 +/- 6.4 h), compared to that of the oral product (3.5 +/- 1.1 h) could allow less-frequent dosing. In conclusion, this study showed that a transdermal delivery system containing 6% caprylic acid in PG could be a favorable alternative for alendronate administration.

Pharmacokinetics of a 5-fluorouracil liposomal delivery system.

OpenAIRE

Simmons, S T; Sherwood, M B; Nichols, D A; Penne, R B; Sery, T; Spaeth, G L

1988-01-01

A liposomal delivery system was developed in an attempt to prolong ocular levels of 5-fluorouracil for glaucoma filtering surgery. The pharmacokinetics of the 5-fluorouracil liposomal delivery system were studied in normal pigmented rabbits with 5-fluorouracil labelled with carbon-14 (C-14). 14C 5-fluorouracil was incorporated into the liposomes at a concentration of 10 g/l and injected subconjunctivally in doses of 5 and 10 mg. Concentrations of 5-fluorouracil were assayed at 10 time interva...

Exposure control practices for administering nitrous oxide: A survey of dentists, dental hygienists, and dental assistants.

Science.gov (United States)

Boiano, James M; Steege, Andrea L; Sweeney, Marie H

2017-06-01

Engineering, administrative, and work practice controls have been recommended for many years to minimize exposure to nitrous oxide during dental procedures. To better understand the extent to which these exposure controls are used, the NIOSH Health and Safety Practices Survey of Healthcare Workers was conducted among members of professional practice organizations representing dentists, dental hygienists and dental assistants. The anonymous, modular, web-based survey was completed by 284 dental professionals in private practice who administered nitrous oxide to adult and/or pediatric patients in the seven days prior to the survey. Use of primary engineering controls (i.e., nasal scavenging mask and/or local exhaust ventilation (LEV) near the patient's mouth) was nearly universal, reported by 93% and 96% of respondents who administered to adult (A) and pediatric (P) patients, respectively. However, adherence to other recommended precautionary practices were lacking to varying degrees, and were essentially no different among those administering nitrous oxide to adult or pediatric patients. Examples of work practices which increase exposure risk, expressed as percent of respondents, included: not checking nitrous oxide equipment for leaks (41% A; 48% P); starting nitrous oxide gas flow before delivery mask or airway mask was applied to patient (13% A; 12% P); and not turning off nitrous oxide gas flow before turning off oxygen flow to the patient (8% A; 7% P). Absence of standard procedures to minimize worker exposure to nitrous oxide (13% of all respondents) and not being trained on safe handling and administration of nitrous oxide (3%) were examples of breaches of administrative controls which may also increase exposure risk. Successful management of nitrous oxide emissions should include properly fitted nasal scavenging masks, supplemental LEV (when nitrous oxide levels cannot be adequately controlled using nasal masks alone), adequate general ventilation, regular

Does dental health of 6-year-olds reflect the reform of the Israeli dental care system?

Science.gov (United States)

Natapov, Lena; Sasson, Avi; Zusman, Shlomo P

2016-01-01

The National health insurance law enacted in 1995 did not include dental care in its basket of services. Dental care for children was first included in 2010, initially up till 8 years of age. The eligibility age rose to 12 years in 2013. The dental survey of 6 year-olds in 2007 found that the average of decayed, missing and filled teeth index (dmft) was 3.31 and 35 % of children were caries free. The current cross sectional survey of dental health for 6 year-olds was conducted as a comparison to the pre-reform status. Twenty-three local authorities were randomly selected nationwide. Two Grade 1 classes were randomly chosen in each. The city of Jerusalem was also included in the survey because of its size. The children were examined according to the WHO Oral Health Survey Methods 4th ed protocol. The dental caries index for deciduous teeth (dmft: decayed, missing, filled teeth) was calculated. One thousand two hundred ten children were examined. 61.7 % of the children suffered from dental decay and only 38.3 % were caries free. The mean dmft was 2.56; d = 1.41 (teeth with untreated caries), f = 1.15 (teeth damaged by decay and restored), virtually none were missing due to caries. Dental caries prevalence was rather consistent, an average of over 2 teeth affected per child. Although there is no major change in comparison to former surveys, there is more treated than untreated disease. In the present survey the f component is higher than in the past, especially in the Jewish sector where it is the main component. It is still lower in the Arab sector. Although the level of dental disease remained rather constant, an increase in the treatment component was observed. In order to reduce caries prevalence, preventive measures such as school dental services and drinking water fluoridation should be extended and continued. Primary preventive dental services should be established for children from birth, with an emphasis on primary health care and educational

Mucoadhesive drug delivery systems

Directory of Open Access Journals (Sweden)

Rahamatullah Shaikh

2011-01-01

Full Text Available Mucoadhesion is commonly defined as the adhesion between two materials, at least one of which is a mucosal surface. Over the past few decades, mucosal drug delivery has received a great deal of attention. Mucoadhesive dosage forms may be designed to enable prolonged retention at the site of application, providing a controlled rate of drug release for improved therapeutic outcome. Application of dosage forms to mucosal surfaces may be of benefit to drug molecules not amenable to the oral route, such as those that undergo acid degradation or extensive first-pass metabolism. The mucoadhesive ability of a dosage form is dependent upon a variety of factors, including the nature of the mucosal tissue and the physicochemical properties of the polymeric formulation. This review article aims to provide an overview of the various aspects of mucoadhesion, mucoadhesive materials, factors affecting mucoadhesion, evaluating methods, and finally various mucoadhesive drug delivery systems (buccal, nasal, ocular, gastro, vaginal, and rectal.

Nanocomposites chitosan/montmorillonite for drug delivery system

International Nuclear Information System (INIS)

Braga, Carla R. Costa; Barbosa, Rossemberg C.; Lima, Rosemary S. Cunha; Fook, Marcus V. Lia; Silva, Suedina M. Lima

2009-01-01

In drugs delivery system the incorporation of an inorganic nanophase in polymer matrix, i.e. production of an inorganic-organic nanocomposite is an attractive alternative to obtain a constant release rate for a prolonged time. This study was performed to obtain films of nanocomposites Chitosan/montmorillonite intercalation by the technique of solution in the proportions of 1:1, 5:1 and 10:1. The nanocomposites were characterized by infrared spectroscopy, X-ray diffraction and thermogravimetric analysis. The results indicated that the feasibility of obtaining films of nanocomposites exfoliate. Among the suggested applications for films developed in this study includes them use for drugs delivery system. (author)

Children's preferences concerning ambiance of dental waiting rooms.

Science.gov (United States)

Panda, A; Garg, I; Shah, M

2015-02-01

Despite many advances in paediatric dentistry, the greatest challenge for any paediatric dentist is to remove the anxiety related to a dental visit and have a child patient to accept dental treatment readily. Minor changes made in the waiting room design can have a major effect on the way any child perceives the upcoming dental experience. This study was carried out to determine children's preferences regarding the dental waiting area so as to improve their waiting experience and reduce their preoperative anxiety before a dental appointment. This was a cross-sectional descriptive study using survey methodology. A questionnaire designed to evaluate children's preferences regarding the waiting room was distributed to new paediatric patients, aged between 6 and 11 years of age, attending an outpatient dental facility and was completed by 212 children (127 males, 85 females). The analyses were carried out on cross-tables using Phi (for 2×2 tables) or Cramer's V (for larger than 2×2 tables) to assess responses to the questionnaire items across age groups and gender. A majority of children preferred music and the ability to play in a waiting room. They also preferred natural light and walls with pictures. They preferred looking at an aquarium or a television and sitting on beanbags and chairs and also preferred plants and oral hygiene posters Repetious. The results obtained from this study may help the dental team decide on an appropriate design of their paediatric waiting room so as to make children comfortable in the dental environment and improve delivery of health care.

Nano-scale gene delivery systems; current technology, obstacles, and future directions.

Science.gov (United States)

Garcia-Guerra, Antonio; Dunwell, Thomas L; Trigueros, Sonia

2018-01-07

Within the different applications of nanomedicine currently being developed, nano-gene delivery is appearing as an exciting new technique with the possibility to overcome recognised hurdles and fulfill several biological and medical needs. The central component of all delivery systems is the requirement for the delivery of genetic material into cells, and for them to eventually reside in the nucleus where their desired function will be exposed. However, genetic material does not passively enter cells; thus, a delivery system is necessary. The emerging field of nano-gene delivery exploits the use of new materials and the properties that arise at the nanometre-scale to produce delivery vectors that can effectively deliver genetic material into a variety of different types of cells. The novel physicochemical properties of the new delivery vectors can be used to address the current challenges existing in nucleic acid delivery in vitro and in vivo. While there is a growing interest in nanostructure-based gene delivery, the field is still in its infancy, and there is yet much to discover about nanostructures and their physicochemical properties in a biological context. We carry out an organized and focused search of bibliographic databases. Our results suggest that despite new breakthroughs in nanostructure synthesis and advanced characterization techniques, we still face many barriers in producing highly efficient and non-toxic delivery systems. In this review, we overview the types of systems currently used for clinical and biomedical research applications along with their advantages and disadvantages, as well as discussing barriers that arise from nano-scale interactions with biological material. In conclusion, we hope that by bringing the far reaching multidisciplinary nature of nano-gene delivery to light, new targeted nanotechnology-bases strategies are developed to overcome the major challenges covered in this review. Copyright© Bentham Science Publishers; For

Examining the safety of dental treatment in pregnant women.

Science.gov (United States)

Michalowicz, Bryan S; DiAngelis, Anthony J; Novak, M John; Buchanan, William; Papapanou, Panos N; Mitchell, Dennis A; Curran, Alice E; Lupo, Virginia R; Ferguson, James E; Bofill, James; Matseoane, Stephen; Deinard, Amos S; Rogers, Tyson B

2008-06-01

Although clinicians generally consider it safe to provide dental care for pregnant women, supporting clinical trial evidence is lacking. This study compares safety outcomes from a trial in which pregnant women received scaling and root planing and other dental treatments. The authors randomly assigned 823 women with periodontitis to receive scaling and root planing, either at 13 to 21 weeks' gestation or up to three months after delivery. They evaluated all subjects for essential dental treatment (EDT) needs, defined as the presence of moderate-to-severe caries or fractured or abscessed teeth; 351 women received complete EDT at 13 to 21 weeks' gestation. The authors used Fisher exact test and a propensity-score adjustment to compare rates of serious adverse events, spontaneous abortions/stillbirths, fetal/congenital anomalies and preterm deliveries ( .05) between women who received EDT and those who did not require this treatment, or between groups that received both EDT and periodontal treatment, either EDT or periodontal treatment alone, or no treatment. Use of topical or local anesthetics during root planing also was not associated with an increased risk of experiencing adverse outcomes. EDT in pregnant women at 13 to 21 weeks' gestation was not associated with an increased risk of experiencing serious medical adverse events or adverse pregnancy outcomes. Data from larger studies and from groups with other treatment needs are needed to confirm the safety of dental care in pregnant women. This study provides evidence that EDT and use of topical and local anesthetics are safe in pregnant women at 13 to 21 weeks' gestation.

The impact of current alternative herbal remedies on dental patient management.

Science.gov (United States)

Karimi, K

1999-01-01

With the recent boom in holistic and herbal medicine and an ever-growing trend among the general population to refer to herbal remedies as an alternative to traditional pharmaceutical therapies, dental health care providers must be aware of the wide consumption of such products and understand their nature. It becomes imperative, therefore, to include questions regarding the use of herbal preparations as a matter of routine in the patient's drug history, since this may impact a safe dental patient care delivery.

Dental Calculus Arrest of Dental Caries.

Science.gov (United States)

Keyes, Paul H; Rams, Thomas E

An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. These observations further document the potential protective effects of dental calculus mineralization against dental caries.

Dental Calculus Arrest of Dental Caries

Science.gov (United States)

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. Materials and methods A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Results Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. Conclusions These observations further document the potential protective effects of dental calculus mineralization against dental caries. PMID:27446993

Encapsulation systems for the delivery of hydrophilic nutraceuticals: Food application.

Science.gov (United States)

Aditya, N P; Espinosa, Yadira Gonzalez; Norton, Ian T

2017-07-01

Increased health risk associated with the sedentary life style is forcing the food manufacturers to look for food products with specific or general health benefits e.g. beverages enriched with nutraceuticals like catechin, curcumin rutin. Compounds like polyphenols, flavonoids, vitamins are the good choice of bioactive compounds that can be used to fortify the food products to enhance their functionality. However due to low stability and bioavailability of these bioactives (both hydrophobic and hydrophilic) within the heterogeneous food microstructure and in the Gastro Intestinal Tract (GIT), it becomes extremely difficult to pass on the real health benefits to the consumers. Recent developments in the application of nano-delivery systems for food product development is proving to be a game changer which has raised the expectations of the researchers, food manufacturers and consumers regarding possibility of enhancing the functionality of bioactives within the fortified food products. In this direction, nano/micro delivery systems using lipids, surfactants and other materials (carbohydrates, polymers, complexes, protein) have been fabricated to stabilize and enhance the biological activity of the bioactive compounds. In the present review, current status of the various delivery systems that are used for the delivery of hydrophilic bioactives and future prospects for using other delivery systems that have been not completely explored for the delivery of hydrophilic bioactives e.g. niosomes; bilosomes, cubosomes are discussed. Copyright © 2017 Elsevier Inc. All rights reserved.

Chitosan-based delivery systems for diclofenac delivery: preparation and characterization

Energy Technology Data Exchange (ETDEWEB)

Dreve, Simina; Kacso, Irina; Bratu, Ioan; Indrea, Emil, E-mail: simina.dreve@itim-cj.r [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath, 400293 Cluj-Napoca (Romania)

2009-08-01

The preparation and characterization of novel materials for drug delivery has rapidly gained importance in development of innovative medicine. The paper concerns the uses of chitosan as an excipient in oral formulations and as a drug delivery vehicle for burnt painful injuries. The use of chitosan (CTS) as base in polyelectrolyte complex systems, to prepare liquid release systems as hydrogels and solid release systems as sponges is presented. In this paper the preparation of CTS hydrogels and sponges carrying diclofenac (DCF), as anti-inflammatory drug is reported. The immobilization of DCF in CTS is done by mixing the CTS hydrogel with the anti-inflammatory drug solutions. The concentration of anti-inflammatory drug in the CTS hydrogel generating the sponges was of 57 mg/l, 72 mg/l and 114 mg/l. The CTS sponges with anti-inflammatory drugs were prepared by freeze-drying at -610{sup 0}C and 0,09 atm. The characterization of the hydrogels and sponges was done by infrared spectra (FTIR) and ultraviolet-visible spectroscopy (UV-VIS). The results indicated the formation of CTS-DCF intermediates. The DCF molecules are forming temporary chelates in CTS hydrogels and sponges and they are compatible with skin or some of biological fluids with satisfactory results.

Chitosan-based delivery systems for diclofenac delivery: preparation and characterization

International Nuclear Information System (INIS)

Dreve, Simina; Kacso, Irina; Bratu, Ioan; Indrea, Emil

2009-01-01

The preparation and characterization of novel materials for drug delivery has rapidly gained importance in development of innovative medicine. The paper concerns the uses of chitosan as an excipient in oral formulations and as a drug delivery vehicle for burnt painful injuries. The use of chitosan (CTS) as base in polyelectrolyte complex systems, to prepare liquid release systems as hydrogels and solid release systems as sponges is presented. In this paper the preparation of CTS hydrogels and sponges carrying diclofenac (DCF), as anti-inflammatory drug is reported. The immobilization of DCF in CTS is done by mixing the CTS hydrogel with the anti-inflammatory drug solutions. The concentration of anti-inflammatory drug in the CTS hydrogel generating the sponges was of 57 mg/l, 72 mg/l and 114 mg/l. The CTS sponges with anti-inflammatory drugs were prepared by freeze-drying at -610 0 C and 0,09 atm. The characterization of the hydrogels and sponges was done by infrared spectra (FTIR) and ultraviolet-visible spectroscopy (UV-VIS). The results indicated the formation of CTS-DCF intermediates. The DCF molecules are forming temporary chelates in CTS hydrogels and sponges and they are compatible with skin or some of biological fluids with satisfactory results.

Porcine Dental Epithelial Cells Differentiated in a Cell Sheet Constructed by Magnetic Nanotechnology

Directory of Open Access Journals (Sweden)

Wataru Koto

2017-10-01

Full Text Available Magnetic nanoparticles (MNPs are widely used in medical examinations, treatments, and basic research, including magnetic resonance imaging, drug delivery systems, and tissue engineering. In this study, MNPs with magnetic force were applied to tissue engineering for dental enamel regeneration. The internalization of MNPs into the odontogenic cells was observed by transmission electron microscopy. A combined cell sheet consisting of dental epithelial cells (DECs and dental mesenchymal cells (DMCs (CC sheet was constructed using magnetic force-based tissue engineering technology. The result of the iron staining indicated that MNPs were distributed ubiquitously over the CC sheet. mRNA expression of enamel differentiation and basement membrane markers was examined in the CC sheet. Immunostaining showed Collagen IV expression at the border region between DEC and DMC layers in the CC sheet. These results revealed that epithelial–mesenchymal interactions between DEC and DMC layers were caused by bringing DECs close to DMCs mechanically by magnetic force. Our study suggests that the microenvironment in the CC sheet might be similar to that during the developmental stage of a tooth bud. In conclusion, a CC sheet employing MNPs could be developed as a novel and unique graft for artificially regenerating dental enamel.

Microemulsions based transdermal drug delivery systems.

Science.gov (United States)

Vadlamudi, Harini C; Narendran, Hyndavi; Nagaswaram, Tejeswari; Yaga, Gowri; Thanniru, Jyotsna; Yalavarthi, Prasanna R

2014-01-01

Since the discovery of microemulsions by Jack H Schulman, there has been huge progress made in applying microemulsion systems in plethora of research and industrial process. Microemulsions are optically isotropic systems consisting of water, oil and amphiphile. These systems are beneficial due to their thermodynamic stability, optical clarity, ease of preparation, higher diffusion and absorption rates. Moreover, it has been reported that the ingredients of microemulsion can effectively overcome the diffusion barrier and penetrate through the stratum corneum of the skin. Hence it becomes promising for both transdermal and dermal drug delivery. However, low viscosity of microemulsion restrains its applicability in pharmaceutical industry. To overcome the above drawback, the low viscous microemulsions were added to viscous gel bases to potentiate its applications as topical drug delivery systems so that various drug related toxic effects and erratic drug absorption can be avoided. The present review deals with the microemulsions, various techniques involved in the development of organic nanoparticles. The review emphasized on microemulsion based systems such as hydrogels and organogels. The physicochemical characteristics, mechanical properties, rheological and stability principles involved in microemulsion based viscous gels were also explored.

Excimer laser beam delivery systems for medical applications

Science.gov (United States)

Kubo, Uichi; Hashishin, Yuichi; Okada, Kazuyuki; Tanaka, Hiroyuki

1993-05-01

We have been doing the basic experiments of UV laser beams and biotissue interaction with both KrF and XeCl lasers. However, the conventional optical fiber can not be available for power UV beams. So we have been investigating about UV power beam delivery systems. These experiments carry on with the same elements doped quartz fibers and the hollow tube. The doped elements are OH ion, chlorine and fluorine. In our latest work, we have tried ArF excimer laser and biotissue interactions, and the beam delivery experiments. From our experimental results, we found that the ArF laser beam has high incision ability for hard biotissue. For example, in the case of the cow's bone incision, the incision depth by ArF laser was ca.15 times of KrF laser. Therefore, ArF laser would be expected to harden biotissue therapy as non-thermal method. However, its beam delivery is difficult to work in this time. We will develop ArF laser beam delivery systems.

Biofilm and dental implant: The microbial link

Directory of Open Access Journals (Sweden)

Sangeeta Dhir

2013-01-01

Full Text Available Mouth provides a congenial environment for the growth of the microorganisms as compared to any other part of the human body by exhibiting an ideal nonshedding surface. Dental plaque happens to be a diverse community of the microorganisms found on the tooth surface. Periodontal disease and the peri-implant disease are specific infections that are originating from these resident microbial species when the balance between the host and the microbial pathogenicity gets disrupted. This review discusses the biofilms in relation to the peri-implant region, factors affecting its presence, and the associated treatment to manage this complex microbial colony. Search Methodology: Electronic search of the medline was done with the search words: Implants and biofilms/dental biofilm formation/microbiology at implant abutment interface/surface free energy/roughness and implant, periimplantitis/local drug delivery and dental implant. Hand search across the journals - clinical oral implant research, implant dentistry, journal of dental research, international journal of oral implantology, journal of prosthetic dentistry, perioodntology 2000, journal of periodontology were performed. The articles included in the review comprised of in vivo studies, in vivo (animal and human studies, abstracts, review articles.

Evaluation of Roadmap to Achieve Energy Delivery Systems Cybersecurity

Energy Technology Data Exchange (ETDEWEB)

Chavez, Adrian R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-10-01

The Department of Energy/Office of Electricity Delivery and Energy Reliability (DOE/OE) Cybersecurity for Energy Delivery Systems (CEDS) program is currently evaluating the Roadmap to Achieve Energy Delivery Systems Cybersecurity document that sets a vision and outlines a set of milestones. The milestones are divided into five strategic focus areas that include: 1. Build a Culture of Security; 2. Assess and Monitor Risk; 3. Develop and Implement New Protective Measures to Reduce Risk; 4. Manage Incidents; and 5. Sustain Security Improvements. The most current version of the roadmap was last updated in September of 2016. Sandia National Laboratories (SNL) has been tasked with revisiting the roadmap to update the current state of energy delivery systems cybersecurity protections. SNL is currently working with previous and current partners to provide feedback on which of the roadmap milestones have been met and to identify any preexisting or new gaps that are not addressed by the roadmap. The specific focus areas SNL was asked to evaluate are: 1. Develop and Implement New Protective Measures to Reduce Risk and 2. Sustain Security Improvements. SNL has formed an Industry Advisory Board (IAB) to assist in answering these questions. The IAB consists of previous partners on past CEDS funded efforts as well as new collaborators that have unique insights into the current state of cybersecurity within energy delivery systems. The IAB includes asset owners, utilities and vendors of control systems. SNL will continue to maintain regular communications with the IAB to provide various perspectives on potential future updates to further improve the breadth of cybersecurity coverage of the roadmap.

Efficiency of mobile dental unit in public health programs

Directory of Open Access Journals (Sweden)

Nitin Gupta

2016-07-01

Full Text Available Almost all dental Colleges run a mobile dental operation for people living in far inaccessible areas who are not able to avail dental care. Mobile dental clinics provide a mode of reaching the unreached by delivering dental care in areas where alternative i.e. private practitioners and fixed clinics are unavailable or inaccessible. Oral diseases account for high morbidity in the community which is compounded by the gross mal-distribution of provision of oral health services in India. In order to ensure accessibility to basic oral health services innovative models of service delivery are being explored. In this context the health economics of mobile oral health care is critically evaluated in this paper. Thus a cost analysis was undertaken to determine the operating expenses for the existing mobile dental unit. Requisite permission of Head of institution was obtained and data was extracted from the records of the mobile dental unit for the year 2014-15.Information on the operating expenses was collected. Costing was done using step down accounting method. Total operating cost of the unit for the year 2014-15 was Rs. 184888/-.Unit cost for each camp was Rs.3625/- and for each patient Rs.76/-. Mobile dental programs can play a vital role in providing access to care to underserved populations and ensuring their mission requires long-term planning. Careful cost analysis based on sound assumptions is of utmost importance.

Application of Stem Cell Technology in Dental Regenerative Medicine.

Science.gov (United States)

Feng, Ruoxue; Lengner, Chistopher

2013-07-01

In this review, we summarize the current literature regarding the isolation and characterization of dental tissue-derived stem cells and address the potential of these cell types for use in regenerative cell transplantation therapy. Looking forward, platforms for the delivery of stem cells via scaffolds and the use of growth factors and cytokines for enhancing dental stem cell self-renewal and differentiation are discussed. We aim to understand the developmental origins of dental tissues in an effort to elucidate the molecular pathways governing the genesis of somatic dental stem cells. The advantages and disadvantages of several dental stem cells are discussed, including the developmental stage and specific locations from which these cells can be purified. In particular, stem cells from human exfoliated deciduous teeth may act as a very practical and easily accessibly reservoir for autologous stem cells and hold the most value in stem cell therapy. Dental pulp stem cells and periodontal ligament stem cells should also be considered for their triple lineage differentiation ability and relative ease of isolation. Further, we address the potentials and limitations of induced pluripotent stem cells as a cell source in dental regenerative. From an economical and a practical standpoint, dental stem cell therapy would be most easily applied in the prevention of periodontal ligament detachment and bone atrophy, as well as in the regeneration of dentin-pulp complex. In contrast, cell-based tooth replacement due to decay or other oral pathology seems, at the current time, an untenable approach.

The potential of dental-protective chewing gum in oral health interventions.

Science.gov (United States)

Ly, Kiet A; Milgrom, Peter; Rothen, Marilynn

2008-05-01

The authors provide an overview of chewing gum as a delivery vehicle for dental-protective agents, highlighting xylitol and its potential application in caries-prevention programs for children. The authors reviewed selected clinical investigations and previous reviews associated with chewing gum containing substances such as calcium, bicarbonate, carbamide, chlorhexidine, fluoride and xylitol and their effects on reducing caries. They searched the MEDLINE database by using the key words "dental caries," "oral health," "calcium," "bicarbonate," "carbamide," "chlorhexidine," "fluoride" and "xylitol." Chewing gum is being used as a delivery vehicle for substances such as calcium, bicarbonate, carbamide, chlorhexidine, fluoride and xylitol to improve oral health and reduce caries. These substances exhibit properties that are protective of the oral environment and mediate common oral diseases. The debate for advocating xylitol use in caries prevention is advancing; however, chewing gum use by young schoolchildren in the United States is hindered by choking hazard concerns and lack of specific xylitol dosing recommendations. The use of chewing gum containing dental-protective substances, particularly xylitol, in caries-prevention programs can reduce the tooth decay epidemic. Chewing gum use by children in the school setting should be reconsidered.

Nanoparticle-based drug delivery systems: promising approaches against infections

International Nuclear Information System (INIS)

Ranghar, Shweta; Sirohi, Parul; Verma, Pritam; Agarwal, Vishnu

2014-01-01

Despite the fact that many new drugs and technologies have been developed to combat the infectious diseases, these have continued to be global health challenges. The use of conventional antimicrobial agents against these infections is always associated with problems such as the development of multiple drug resistance and adverse side effects. In addition, the inefficient traditional drug delivery system results in inadequate therapeutic index, low bioavailability of drugs and many other limitations. In this regard, antimicrobial nanoparticles and nanosized drug delivery carriers have emerged as potent effective agents against the infections. Nanoparticles have unique properties owing to their ultra small and controllable size such as high surface area, enhanced reactivity, and functionalizable structure. This review focused on different classes of antimicrobial nanoparticles, including metal, metal oxide and others along with their mechanism of action and their potential use against the infections. The review also focused on the development of nanoparticle systems for antimicrobial drug delivery and use of these systems for delivery of various antimicrobial agents, giving an overview about modern nanoparticle based therapeutic strategies against the infections. (author)

Nanoparticle-based drug delivery systems: promising approaches against infections

Energy Technology Data Exchange (ETDEWEB)

Ranghar, Shweta; Sirohi, Parul [Department of Applied Mechanics, Motilal Nehru National Institute of Technology, Allahabad (India); Verma, Pritam; Agarwal, Vishnu [Department of Biotechnology, Motilal Nehru National Institute of Technology, Allahabad (India)

2014-03-15

Despite the fact that many new drugs and technologies have been developed to combat the infectious diseases, these have continued to be global health challenges. The use of conventional antimicrobial agents against these infections is always associated with problems such as the development of multiple drug resistance and adverse side effects. In addition, the inefficient traditional drug delivery system results in inadequate therapeutic index, low bioavailability of drugs and many other limitations. In this regard, antimicrobial nanoparticles and nanosized drug delivery carriers have emerged as potent effective agents against the infections. Nanoparticles have unique properties owing to their ultra small and controllable size such as high surface area, enhanced reactivity, and functionalizable structure. This review focused on different classes of antimicrobial nanoparticles, including metal, metal oxide and others along with their mechanism of action and their potential use against the infections. The review also focused on the development of nanoparticle systems for antimicrobial drug delivery and use of these systems for delivery of various antimicrobial agents, giving an overview about modern nanoparticle based therapeutic strategies against the infections. (author)

Delivery Systems for Biopharmaceuticals. Part I: Nanoparticles and Microparticles.

Science.gov (United States)

Silva, Ana C; Lopes, Carla M; Lobo, José M S; Amaral, Maria H

2015-01-01

Pharmaceutical biotechnology has been showing therapeutic success never achieved with conventional drug molecules. Therefore, biopharmaceutical products are currently well-established in clinic and the development of new ones is expected. These products comprise mainly therapeutic proteins, although nucleic acids and cells are also included. However, according to their sensitive molecular structures, the efficient delivery of biopharmaceuticals is challenging. Several delivery systems (e.g. microparticles and nanoparticles) composed of different materials (e.g. polymers and lipids) have been explored and demonstrated excellent outcomes, such as: high cellular transfection efficiency for nucleic acids, cell targeting, increased proteins and peptides bioavailability, improved immune response in vaccination, and viability maintenance of microencapsulated cells. Nonetheless, important issues need to be addressed before they reach clinics. For example, more in vivo studies in animals, accessing the toxicity potential and predicting in vivo failure of these delivery systems are required. This is the Part I of two review articles, which presents the state of the art of delivery systems for biopharmaceuticals. Part I deals with microparticles and polymeric and lipid nanoparticles.

Oral delivery of peptides and proteins using lipid-based drug delivery systems.

Science.gov (United States)

Li, Ping; Nielsen, Hanne Mørck; Müllertz, Anette

2012-10-01

In order to successfully develop lipid-based drug delivery systems (DDS) for oral administration of peptides and proteins, it is important to gain an understanding of the colloid structures formed by these DDS, the mode of peptide and protein incorporation as well as the mechanism by which intestinal absorption of peptides and proteins is promoted. The present paper reviews the literature on lipid-based DDS, employed for oral delivery of peptides and proteins and highlights the mechanisms by which the different lipid-based carriers are expected to overcome the two most important barriers (extensive enzymatic degradation and poor transmucosal permeability). This paper also gives a clear-cut idea about advantages and drawbacks of using different lipidic colloidal carriers ((micro)emulsions, solid lipid core particles and liposomes) for oral delivery of peptides and proteins. Lipid-based DDS are safe and suitable for oral delivery of peptides and proteins. Significant progress has been made in this area with several technologies on clinical trials. However, a better understanding of the mechanism of action in vivo is needed in order to improve the design and development of lipid-based DDS with the desired bioavailability and therapeutic profile.

Characterization of particulate drug delivery systems for oral delivery of Peptide and protein drugs.

Science.gov (United States)

Christophersen, Philip Carsten; Fano, Mathias; Saaby, Lasse; Yang, Mingshi; Nielsen, Hanne Mørck; Mu, Huiling

2015-01-01

Oral drug delivery is a preferred route because of good patient compliance. However, most peptide/ protein drugs are delivered via parenteral routes because of the absorption barriers in the gastrointestinal (GI) tract such as enzymatic degradation by proteases and low permeability acrossthe biological membranes. To overcome these barriers, different formulation strategies for oral delivery of biomacromolecules have been proposed, including lipid based formulations and polymer-based particulate drug delivery systems (DDS). The aim of this review is to summarize the existing knowledge about oral delivery of peptide/protein drugs and to provide an overview of formulationand characterization strategies. For a better understanding of the challenges in oral delivery of peptide/protein drugs, the composition of GI fluids and the digestion processes of different kinds of excipients in the GI tract are summarized. Additionally, the paper provides an overview of recent studies on characterization of solid drug carriers for peptide/protein drugs, drug distribution in particles, drug release and stability in simulated GI fluids, as well as the absorption of peptide/protein drugs in cell-based models. The use of biorelevant media when applicable can increase the knowledge about the quality of DDS for oral protein delivery. Hopefully, the knowledge provided in this review will aid the establishment of improved biorelevant models capable of forecasting the performance of particulate DDS for oral peptide/protein delivery.

Nonviral Delivery Systems For Cancer Gene Therapy: Strategies And Challenges.

Science.gov (United States)

Shim, Gayong; Kim, Dongyoon; Le, Quoc-Viet; Park, Gyu Thae; Kwon, Taekhyun; Oh, Yu-Kyoung

2018-01-19

Gene therapy has been receiving widespread attention due to its unique advantage in regulating the expression of specific target genes. In the field of cancer gene therapy, modulation of gene expression has been shown to decrease oncogenic factors in cancer cells or increase immune responses against cancer. Due to the macromolecular size and highly negative physicochemical features of plasmid DNA, efficient delivery systems are an essential ingredient for successful gene therapy. To date, a variety of nanostructures and materials have been studied as nonviral gene delivery systems. In this review, we will cover nonviral delivery strategies for cancer gene therapy, with a focus on target cancer genes and delivery materials. Moreover, we will address current challenges and perspectives for nonviral delivery-based cancer gene therapeutics. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Use of a gesture user interface as a touchless image navigation system in dental surgery: Case series report

Energy Technology Data Exchange (ETDEWEB)

Rosa, Guillermo M.; Elizondo, Maria L. [CORE Dental Clinic, Resistencia (Argentina)

2014-06-15

The purposes of this study were to develop a workstation computer that allowed intraoperative touchless control of diagnostic and surgical images by a surgeon, and to report the preliminary experience with the use of the system in a series of cases in which dental surgery was performed. A custom workstation with a new motion sensing input device (Leap Motion) was set up in order to use a natural user interface (NUI) to manipulate the imaging software by hand gestures. The system allowed intraoperative touchless control of the surgical images. For the first time in the literature, an NUI system was used for a pilot study during 11 dental surgery procedures including tooth extractions, dental implant placements, and guided bone regeneration. No complications were reported. The system performed very well and was very useful. The proposed system fulfilled the objective of providing touchless access and control of the system of images and a three-dimensional surgical plan, thus allowing the maintenance of sterile conditions. The interaction between surgical staff, under sterile conditions, and computer equipment has been a key issue. The solution with an NUI with touchless control of the images seems to be closer to an ideal. The cost of the sensor system is quite low; this could facilitate its incorporation into the practice of routine dental surgery. This technology has enormous potential in dental surgery and other healthcare specialties.

Use of a gesture user interface as a touchless image navigation system in dental surgery: Case series report

International Nuclear Information System (INIS)

Rosa, Guillermo M.; Elizondo, Maria L.

2014-01-01

The purposes of this study were to develop a workstation computer that allowed intraoperative touchless control of diagnostic and surgical images by a surgeon, and to report the preliminary experience with the use of the system in a series of cases in which dental surgery was performed. A custom workstation with a new motion sensing input device (Leap Motion) was set up in order to use a natural user interface (NUI) to manipulate the imaging software by hand gestures. The system allowed intraoperative touchless control of the surgical images. For the first time in the literature, an NUI system was used for a pilot study during 11 dental surgery procedures including tooth extractions, dental implant placements, and guided bone regeneration. No complications were reported. The system performed very well and was very useful. The proposed system fulfilled the objective of providing touchless access and control of the system of images and a three-dimensional surgical plan, thus allowing the maintenance of sterile conditions. The interaction between surgical staff, under sterile conditions, and computer equipment has been a key issue. The solution with an NUI with touchless control of the images seems to be closer to an ideal. The cost of the sensor system is quite low; this could facilitate its incorporation into the practice of routine dental surgery. This technology has enormous potential in dental surgery and other healthcare specialties.

Gene delivery systems by the combination of lipid bubbles and ultrasound.

Science.gov (United States)

Negishi, Yoichi; Endo-Takahashi, Yoko; Maruyama, Kazuo

2016-11-28

Gene therapy is promising for the treatment of many diseases including cancers and genetic diseases. From the viewpoint of safety, ultrasound (US)-mediated gene delivery with nano/ microbubbles was recently developed as a novel non-viral vector system. US-mediated gene delivery using nano/microbubbles are able to produce transient changes in the permeability of the cell membrane after US-induced cavitation while reducing cellular damage and enables the tissue-specific or the site-specific intracellular delivery of gene both in vitro and in vivo. We have recently developed novel lipid nanobubbles (Lipid Bubbles). These nanobubbles can also be used to enhance the efficacy of the US-mediated genes (plasmid DNA, siRNA, and miRNA etc.) delivery. In this review, we describe US-mediated delivery systems combined with nano/microbubbles and discuss their feasibility as non-viral vector systems.

Effects of bleaching agents and adhesive systems in dental pulp: a literature review

OpenAIRE

Oliveira, Maria Antonieta Veloso Carvalho de; Quagliatto, Paulo Sérgio; Magalhães, Denildo; Biffi, João Carlos Gabrielli

2012-01-01

The dental pulp may be exposed to several irritants that are potentially noxious to the health and functions of this tissue. Each type of irritant or injury has different effects on the pulp, which are generally characterized by acute inflammation, chronic inflammation or necrosis. Common examples of irritants are dental caries, cavity preparation procedures, traumatic injuries, and chemical substances like bleaching agents and adhesive systems. The present study aimed to review the current k...

Biofilm problems in dental unit water systems and its practical control.

LENUS (Irish Health Repository)

Coleman, D C

2009-05-01

Dental chair units (DCUs) contain integrated systems that provide the instruments and services for a wide range of dental procedures. DCUs use water to cool and irrigate DCU-supplied instruments and tooth surfaces during dental treatment. Water is supplied to these instruments by a network of interconnected narrow-bore (2-3 mm) plastic tubes called dental unit waterlines (DUWLs). Many studies over the last 40 years demonstrated that DUWL output water is often contaminated with high densities of micro-organisms, predominantly Gram-negative aerobic heterotropic environmental bacteria, including Legionella and Pseudomonas species. Untreated DUWLs host biofilms that permit micro-organisms to multiply and disperse through the water network and which are aerosolized by DCU instrument use, thus exposing patients and staff to these micro-organisms, to fragments of biofilm and bacterial endotoxins. This review concentrates on how practical developments and innovations in specific areas can contribute to effective DUWL biofilm control. These include the use of effective DUWL treatment agents, improvements to DCU supply water quality, DCU design changes, development of automated DUWL treatment procedures that are effective at controlling biofilm in the long-term and require minimal human intervention, are safe for patients and staff, and which do not cause deterioration of DCU components following prolonged use.

Shaping dental contract reform: a clinical and cost-effective analysis of incentive-driven commissioning for improved oral health in primary dental care

Science.gov (United States)

Hulme, C; Robinson, P G; Saloniki, E C; Vinall-Collier, K; Baxter, P D; Douglas, G; Gibson, B; Godson, J H; Meads, D; Pavitt, S H

2016-01-01

Objective To evaluate the clinical and cost-effectiveness of a new blended dental contract incentivising improved oral health compared with a traditional dental contract based on units of dental activity (UDAs). Design Non-randomised controlled study. Setting Six UK primary care dental practices, three working under a new blended dental contract; three matched practices under a traditional contract. Participants 550 new adult patients. Interventions A new blended/incentive-driven primary care dentistry contract and service delivery model versus the traditional contract based on UDAs. Main outcome measures Primary outcome was as follows: percentage of sites with gingival bleeding on probing. Secondary outcomes were as follows: extracted and filled teeth (%), caries (International Caries Detection and Assessment System (ICDAS)), oral health-related quality of life (Oral Health Impact Profile-14 (OHIP-14)). Incremental cost-effective ratios used OHIP-14 and quality adjusted life years (QALYs) derived from the EQ-5D-3L. Results At 24 months, 291/550 (53%) patients returned for final assessment; those lost to follow-up attended 6.46 appointments on average (SD 4.80). The primary outcome favoured patients in the blended contract group. Extractions and fillings were more frequent in this group. Blended contracts were financially attractive for the dental provider but carried a higher cost for the service commissioner. Differences in generic health-related quality of life were negligible. Positive changes over time in oral health-related quality of life in both groups were statistically significant. Conclusions This is the first UK study to assess the clinical and cost-effectiveness of a blended contract in primary care dentistry. Although the primary outcome favoured the blended contract, the results are limited because 47% patients did not attend at 24 months. This is consistent with 39% of adults not being regular attenders and 27% only visiting their dentist when

Nanoparticulate systems for nucleic acid delivery

NARCIS (Netherlands)

Varkouhi, A.K.

2011-01-01

Development of carrier systems with controllable physicochemical and delivery properties has opened up the possibility of nanomedicines containing nucleic acids. In the last decades, much effort has been dedicated to two exciting approaches in biomedicine, namely gene and RNA interference

Adamantane in Drug Delivery Systems and Surface Recognition.

Science.gov (United States)

Štimac, Adela; Šekutor, Marina; Mlinarić-Majerski, Kata; Frkanec, Leo; Frkanec, Ruža

2017-02-16

The adamantane moiety is widely applied in design and synthesis of new drug delivery systems and in surface recognition studies. This review focuses on liposomes, cyclodextrins, and dendrimers based on or incorporating adamantane derivatives. Our recent concept of adamantane as an anchor in the lipid bilayer of liposomes has promising applications in the field of targeted drug delivery and surface recognition. The results reported here encourage the development of novel adamantane-based structures and self-assembled supramolecular systems for basic chemical investigations as well as for biomedical application.

Adamantane in Drug Delivery Systems and Surface Recognition

Directory of Open Access Journals (Sweden)

Adela Štimac

2017-02-01

Full Text Available The adamantane moiety is widely applied in design and synthesis of new drug delivery systems and in surface recognition studies. This review focuses on liposomes, cyclodextrins, and dendrimers based on or incorporating adamantane derivatives. Our recent concept of adamantane as an anchor in the lipid bilayer of liposomes has promising applications in the field of targeted drug delivery and surface recognition. The results reported here encourage the development of novel adamantane-based structures and self-assembled supramolecular systems for basic chemical investigations as well as for biomedical application.

Applications of Nanomaterials in Dental Science: A Review.

Science.gov (United States)

Sharan, Jitendra; Singh, Shivani; Lale, Shantanu V; Mishra, Monu; Koul, Veena; Kharbanda, P

2017-04-01

Nanotechnology has revolutionized health care industry in a large scale and its applications are a boon to modern medicine and dental science. It is expected to pervade and further revolutionize the art and science of dentistry and may well have important applications spanning all the aspects of oral diseases, diagnosis, prevention and treatment. Materials science in dentistry has embraced the technology to produce nanomaterials that are being used in caries inhibitors, antimicrobial resins, hard tissue remineralizing agents, targeted drug delivery, scaffolds, bio-membranes, nanocrystalline hydroxyl apatite, restorative cements, adhesion promoters and boosters, bioactive glass, tissue conditioners, reinforced methacrylate resins, root canal disinfectants, friction free orthodontic arch wires and nano composites life. These upcoming technologies have potential to bring about significant benefits in the form of improvement in dental science and to society. The present review presents the latest recent developments in this interdisciplinary field bridging nanotechnology and dental science.

LOGISTIC SYSTEM OF LOAD DELIVERY AND QUALITY OF ITS OPERATION

Directory of Open Access Journals (Sweden)

O. G. Drozdovskaya

2006-01-01

Full Text Available The paper considers an opportunity for obtaining a competitive advantage by a transport and dispatch service company in the market of transport services while establishing a logistic system of load delivery. A model of delivery system, an universal scheme of system designing for every specific case are presented and also indices for evaluation of its operational quality are proposed in the paper.

Advances in the Applications of Polyhydroxyalkanoate Nanoparticles for Novel Drug Delivery System

Directory of Open Access Journals (Sweden)

Anupama Shrivastav

2013-01-01

Full Text Available Drug delivery technology is emerging as an interdisciplinary science aimed at improving human health. The controlled delivery of pharmacologically active agents to the specific site of action at the therapeutically optimal rate and dose regimen has been a major goal in designing drug delivery systems. Over the past few decades, there has been considerable interest in developing biodegradable drug carriers as effective drug delivery systems. Polymeric materials from natural sources play an important role in controlled release of drug at a particular site. Polyhydroxyalkanoates, due to their origin from natural sources, are given attention as candidates for drug delivery materials. Biodegradable and biocompatible polyhydroxyalkanoates are linear polyesters produced by microorganisms under unbalanced growth conditions, which have emerged as potential polymers for use as biomedical materials for drug delivery due to their unique physiochemical and mechanical properties. This review summarizes many of the key findings in the applications of polyhydroxyalkanoates and polyhydroxyalkanoate nanoparticles for drug delivery system.

Development of a mobile device optimized cross platform-compatible oral pathology and radiology spaced repetition system for dental education.

Science.gov (United States)

Al-Rawi, Wisam; Easterling, Lauren; Edwards, Paul C

2015-04-01

Combining active recall testing with spaced repetition increases memory retention. The aim of this study was to evaluate and compare students' perception and utilization of an electronic spaced repetition oral pathology-radiology system in dental hygiene education and predoctoral dental education. The study employed an open-source suite of applications to create electronic "flashcards" that can be individually adjusted for frequency of repetition, depending on a user's assessment of difficulty. Accessible across multiple platforms (iOS, Android, Linux, OSX, Windows) as well as via any web-based browser, this framework was used to develop an oral radiology-oral pathology database of case-based questions. This system was introduced in two courses: sophomore oral pathology for dental students and sophomore radiology for dental hygiene students. Students were provided free software and/or mobile tablet devices as well as a database of 300 electronic question cards. Study participants were surveyed on frequency and extent of use. Perception-based surveys were used to evaluate their attitudes towards this technology. Of the eligible students, 12 of 22 (54.5%) dental hygiene and 49 of 107 (45.8%) dental students responded to the surveys. Adoption rates and student feedback were compared between the two groups. Among the respondents, acceptance of this technology with respect to educational usefulness was similar for the dental and dental hygiene students (median=5 on a five-point scale; dental hygiene interquartile range (IQR)=0; dental IQR=1). Only a minority of the survey respondents (25% dental, 33% dental hygiene) took advantage of one of the main benefits of this technology: automated spaced repetition.

Automated Dental Epidemiology System. II. Systems Analysis and Functional Design,

Science.gov (United States)

1983-08-01

involvement or debilitating soft tissue pathology (e.g., pericoronitis or periodontal abscess ). Therefore it is desired that urgently needed treatment...through the naval population. Developing this kind of information requires extensive use of dental epidemiology. The incidence of caries and periodontal ...Navy Dental Corps efforts toward reducing the incidence and detrimental effects of caries and periodontal disease in the field and afloat. In this

Distance Learning Delivery Systems: Instructional Options.

Science.gov (United States)

Steele, Ray L.

1993-01-01

Discusses the availability of satellite and cable programing to provide distance education opportunities in school districts. Various delivery systems are described, including telephones with speakers, personal computers, and satellite dishes; and a sidebar provides a directory of distance learning opportunities, including telecommunications…

CLINICAL CONSIDERATIONS OF DENTAL IMPLANT SYSTEM IN IMMEDIATE LOADING IMPLANT CASES

Directory of Open Access Journals (Sweden)

Carolina Damayanti Marpaung

2015-06-01

Full Text Available Immediate loading of dental implant has been researched intensively in the development of Branemark’s early concept of 2 stages implant placement. This was embarked from both patients and practiitioner’s convenience towards a simpler protocol and shorter time frame. Many recent researchers later found that micromotions derived from occlusal loading for a certain degree, instead of resulting a fibrous tissue encapsulation, can enhance the osseointegration process. Dental Implant system enhancement towards maximizing the primary stability held a key factor in Branemark’s concept development. Surgical protocol and implant design was found to give a significant contribution to the prognosis of immediate-loading implants.

Communication skills for extended duties dental nurses: the childsmile perspective.

Science.gov (United States)

O'Keefe, Emma

2015-02-01

Good communication and influencing skills are key competency areas for dental nurses and are highly relevant when working with children and their families/carers in Childsmile, a national oral health improvement programme for children in Scotland. The General Dental Council (GDC) identifies communication skills as one of the nine principles for registrants; a large number of complaints seen by the GDC relate to allegations around communication and patient expectations not being fully met. Much time and investment has been spent in researching the role of the Extended Duties Dental Nurse (EDDN) and ensuring appropriate training is provided. While there is specific training for EDDNs delivering the Childsmile programme, the programme appreciates that good communication skills are a core component of all training programmes for dental nurses. This paper sets out to explore the role of EDDNs in Childsmile and specifically looks at the importance of good communication skills and how it facilitates and impacts on the delivery of the Childsmile programme in a variety of settings.

Nanoparticulate delivery systems for antiviral drugs.

Science.gov (United States)

Lembo, David; Cavalli, Roberta

2010-01-01

Nanomedicine opens new therapeutic avenues for attacking viral diseases and for improving treatment success rates. Nanoparticulate-based systems might change the release kinetics of antivirals, increase their bioavailability, improve their efficacy, restrict adverse drug side effects and reduce treatment costs. Moreover, they could permit the delivery of antiviral drugs to specific target sites and viral reservoirs in the body. These features are particularly relevant in viral diseases where high drug doses are needed, drugs are expensive and the success of a therapy is associated with a patient's adherence to the administration protocol. This review presents the current status in the emerging area of nanoparticulate delivery systems in antiviral therapy, providing their definition and description, and highlighting some peculiar features. The paper closes with a discussion on the future challenges that must be addressed before the potential of nanotechnology can be translated into safe and effective antiviral formulations for clinical use.

Dental treatment planning considerations for patients using cannabis: A case report.

Science.gov (United States)

Grafton, Sarah Essek; Huang, Po Ning; Vieira, Alexandre R

2016-05-01

There is a deficit in clinical research on the potential risks involved in treating dental patients who use cannabis for either medicinal or recreational purposes. The aim of this case report is to illustrate the need for additional education for oral health care professionals so they can understand the wide variety of available cannabis options and their potential effects on dental treatment. A 27-year-old man sought care at the dental clinic with a nonrestorable molar requiring extraction. During the review of his medical history, the patient reported taking a "dab" of marijuana approximately 5 hours before his appointment. Because of the admission of recent illicit drug use, no treatment was rendered. The patient was offered an appointment the next day but he refused, citing bias in regard to his cannabis use. The number of Americans using marijuana is increasing rapidly. Twenty-three states and the District of Columbia have laws legalizing cannabis to some degree, and Alaska, Colorado, Oregon, and Washington have legalized marijuana for recreational use. This drastic upswing in availability and usage will require dentists to address the possible effects of cannabis on dental practices. It is imperative that dental care providers make clinical decisions based on scientific evidence regarding the pharmacologic and psychological effects of marijuana, not on the societal stigma associated with illegal drug use. Dentists should be familiar with popular delivery systems and understand the differences between various marijuana options. Clinical guidelines may need to be developed to help providers assess the patient's degree of cognitive impairment. Dentists should be able to advise patients on the potential consequences of this habit on their oral health. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

Non-viral Nucleic Acid Delivery Strategies to the Central Nervous System

Directory of Open Access Journals (Sweden)

James-Kevin Tan

2016-11-01

Full Text Available With an increased prevalence and understanding of central nervous system injuries and neurological disorders, nucleic acid therapies are gaining promise as a way to regenerate lost neurons or halt disease progression. While more viral vectors have been used clinically as tools for gene delivery, non-viral vectors are gaining interest due to lower safety concerns and the ability to deliver all types of nucleic acids. Nevertheless, there are still a number of barriers to nucleic acid delivery. In this focused review, we explore the in vivo challenges hindering non-viral nucleic acid delivery to the central nervous system and the strategies and vehicles used to overcome them. Advantages and disadvantages of different routes of administration including: systemic injection, cerebrospinal fluid injection, intraparenchymal injection, and peripheral administration are discussed. Non-viral vehicles and treatment strategies that have overcome delivery barriers and demonstrated in vivo gene transfer to the central nervous system are presented. These approaches can be used as guidelines in developing synthetic gene delivery vectors for central nervous system applications and will ultimately bring non-viral vectors closer to clinical application.

Software Build and Delivery Systems

Energy Technology Data Exchange (ETDEWEB)

Robey, Robert W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-07-10

This presentation deals with the hierarchy of software build and delivery systems. One of the goals is to maximize the success rate of new users and developers when first trying your software. First impressions are important. Early successes are important. This also reduces critical documentation costs. This is a presentation focused on computer science and goes into detail about code documentation.

Use of a gesture user interface as a touchless image navigation system in dental surgery: Case series report

Science.gov (United States)

Elizondo, María L.

2014-01-01

Purpose The purposes of this study were to develop a workstation computer that allowed intraoperative touchless control of diagnostic and surgical images by a surgeon, and to report the preliminary experience with the use of the system in a series of cases in which dental surgery was performed. Materials and Methods A custom workstation with a new motion sensing input device (Leap Motion) was set up in order to use a natural user interface (NUI) to manipulate the imaging software by hand gestures. The system allowed intraoperative touchless control of the surgical images. Results For the first time in the literature, an NUI system was used for a pilot study during 11 dental surgery procedures including tooth extractions, dental implant placements, and guided bone regeneration. No complications were reported. The system performed very well and was very useful. Conclusion The proposed system fulfilled the objective of providing touchless access and control of the system of images and a three-dimensional surgical plan, thus allowing the maintenance of sterile conditions. The interaction between surgical staff, under sterile conditions, and computer equipment has been a key issue. The solution with an NUI with touchless control of the images seems to be closer to an ideal. The cost of the sensor system is quite low; this could facilitate its incorporation into the practice of routine dental surgery. This technology has enormous potential in dental surgery and other healthcare specialties. PMID:24944966

Efficient systemic DNA delivery to the tumor by self-assembled nanoparticle

Science.gov (United States)

Tang, Hailin; Xie, Xinhua; Guo, Jiaoli; Wei, Weidong; Wu, Minqing; Liu, Peng; Kong, Yanan; Yang, Lu; Hung, Mien-Chie; Xie, Xiaoming

2014-01-01

There are few delivery agents that could deliver gene with high efficiency and low toxicity, especially for animal experiments. Therefore, creating vectors with good delivery efficiency and safety profile is a meaningful work. We have developed a self-assembled gene delivery system (XM001), which can more efficiently deliver DNA to multiple cell lines and breast tumor, as compared to commercial delivery agents. In addition, systemically administrated XM001-BikDD (BikDD is a mutant form of proapoptotic gene Bik) significantly inhibited the growth of human breast cancer cells and prolonged the life span in implanted nude mice. This study demonstrates that XM001 is an efficient and widespread transfection agent, which could be a promising tumor delivery vector for cancer targeted therapy.

The possible usability of three-dimensional cone beam computed dental tomography in dental research

Science.gov (United States)

Yavuz, I.; Rizal, M. F.; Kiswanjaya, B.

2017-08-01

The innovations and advantages of three-dimensional cone beam computed dental tomography (3D CBCT) are continually growing for its potential use in dental research. Imaging techniques are important for planning research in dentistry. Newly improved 3D CBCT imaging systems and accessory computer programs have recently been proven effective for use in dental research. The aim of this study is to introduce 3D CBCT and open a window for future research possibilities that should be given attention in dental research.

Dental Hygienist-Led Chronic Disease Management System to Control Early Childhood Caries.

Science.gov (United States)

Ng, Man Wai; Fida, Zameera

2016-06-01

Management of the complex chronic disease of early childhood caries requires a system of coordinated health care interventions which can be led by a dental hygienist and where patient self-care efforts are paramount. Even after receiving costly surgical treatment under general anesthesia in the operating room, many children develop new and recurrent caries after only 6-12 months, a sequela that can be prevented. This article describes the chronic disease management (CDM) of dental caries, a science-based approach that can prevent and control caries. In this article, we (1) introduce the concept of CDM of dental caries, (2) provide evidence that CDM improves oral health outcomes, and (3) propose a dental hygienist-led team-based oral health care approach to CDM. Although we will be describing the CDM approach for early childhood caries, CDM of caries is applicable in children, adolescents, and adults. Early childhood caries disease control requires meaningful engagement of patients and parents by the oral health care team to assist them with making behavioral changes in the unique context of their families and communities. The traditional dentist/hygienist/assistant model needs to evolve to a collaborative partnership between care providers and patients/families. This partnership will be focused on systematic risk assessment and behaviorally based management of the disease itself, with sensitivity toward the familial environment. Early pilot study results demonstrate reductions in the rates of new caries, dental pain, and referral to the operating room compared with baseline rates. Dental hygienists are the appropriate team members to lead this approach because of their expertise in behavior change and prevention. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Exploring information systems outsourcing in U.S. hospital-based health care delivery systems.

Science.gov (United States)

Diana, Mark L

2009-12-01

The purpose of this study is to explore the factors associated with outsourcing of information systems (IS) in hospital-based health care delivery systems, and to determine if there is a difference in IS outsourcing activity based on the strategic value of the outsourced functions. IS sourcing behavior is conceptualized as a case of vertical integration. A synthesis of strategic management theory (SMT) and transaction cost economics (TCE) serves as the theoretical framework. The sample consists of 1,365 hospital-based health care delivery systems that own 3,452 hospitals operating in 2004. The findings indicate that neither TCE nor SMT predicted outsourcing better than the other did. The findings also suggest that health care delivery system managers may not be considering significant factors when making sourcing decisions, including the relative strategic value of the functions they are outsourcing. It is consistent with previous literature to suggest that the high cost of IS may be the main factor driving the outsourcing decision.

Micelles As Delivery System for Cancer Treatment.

Science.gov (United States)

Keskin, Dilek; Tezcaner, Aysen

2017-01-01

Micelles are nanoparticles formed by the self-assembly of amphiphilic block copolymers in certain solvents above concentrations called critical micelle concentration (CMC). Micelles are used in different fields like food, cosmetics, medicine, etc. These nanosized delivery systems are under spotlight in the recent years with new achievements in terms of their in vivo stability, ability to protect entrapped drug, release kinetics, ease of cellular penetration and thereby increased therapeutic efficacy. Drug loaded micelles can be prepared by dialysis, oil-in-water method, solid dispersion, freezing, spray drying, etc. The aim of this review is to give an overview of the research on micelles (in vitro, in vivo and clinical) as delivery system for cancer treatment. Passive targeting is one route for accumulation of nanosized micellar drug formulations. Many research groups from both academia and industry focus on developing new strategies for improving the therapeutic efficacy of micellar systems (active targeting to the tumor site, designing multidrug delivery systems for overcoming multidrug resistance or micelles formed by prodrug conjugates, etc). There is only one micellar drug formulation in South Korea that has reached clinical practice. However, there are many untargeted anticancer drug loaded micellar formulations in clinical trials, which have potential for use in clinics. Many more products are expected to be on the market in the near future. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Drug Delivery Systems for Imaging and Therapy of Parkinson's Disease.

Science.gov (United States)

Gunay, Mine Silindir; Ozer, A Yekta; Chalon, Sylvie

2016-01-01

Although a variety of therapeutic approaches are available for the treatment of Parkinson's disease, challenges limit effective therapy. Among these challenges are delivery of drugs through the blood brain barier to the target brain tissue and the side effects observed during long term administration of antiparkinsonian drugs. The use of drug delivery systems such as liposomes, niosomes, micelles, nanoparticles, nanocapsules, gold nanoparticles, microspheres, microcapsules, nanobubbles, microbubbles and dendrimers is being investigated for diagnosis and therapy. This review focuses on formulation, development and advantages of nanosized drug delivery systems which can penetrate the central nervous system for the therapy and/or diagnosis of PD, and highlights future nanotechnological approaches. It is esential to deliver a sufficient amount of either therapeutic or radiocontrast agents to the brain in order to provide the best possible efficacy or imaging without undesired degradation of the agent. Current treatments focus on motor symptoms, but these treatments generally do not deal with modifying the course of Parkinson's disease. Beyond pharmacological therapy, the identification of abnormal proteins such as α -synuclein, parkin or leucine-rich repeat serine/threonine protein kinase 2 could represent promising alternative targets for molecular imaging and therapy of Parkinson's disease. Nanotechnology and nanosized drug delivery systems are being investigated intensely and could have potential effect for Parkinson's disease. The improvement of drug delivery systems could dramatically enhance the effectiveness of Parkinson's Disease therapy and reduce its side effects.

Structured emulsion-based delivery systems: controlling the digestion and release of lipophilic food components.

Science.gov (United States)

McClements, David Julian; Li, Yan

2010-09-15

There is a need for edible delivery systems to encapsulate, protect and release bioactive and functional lipophilic constituents within the food and pharmaceutical industries. These delivery systems could be used for a number of purposes: controlling lipid bioavailability; targeting the delivery of bioactive components within the gastrointestinal tract; and designing food matrices that delay lipid digestion and induce satiety. Emulsion technology is particularly suited for the design and fabrication of delivery systems for lipids. In this article we provide an overview of a number of emulsion-based technologies that can be used as edible delivery systems by the food and other industries, including conventional emulsions, nanoemulsions, multilayer emulsions, solid lipid particles, and filled hydrogel particles. Each of these delivery systems can be produced from food-grade (GRAS) ingredients (e.g., lipids, proteins, polysaccharides, surfactants, and minerals) using relatively simple processing operations (e.g., mixing, homogenizing, and thermal processing). The structure, preparation, and utilization of each type of delivery system for controlling lipid digestion are discussed. This knowledge can be used to select the most appropriate emulsion-based delivery system for specific applications, such as encapsulation, controlled digestion, and targeted release. Copyright 2010 Elsevier B.V. All rights reserved.

Dental Enamel Defects and Celiac Disease

Science.gov (United States)

... Digestive System & How it Works Zollinger-Ellison Syndrome Dental Enamel Defects and Celiac Disease Celiac disease manifestations ... affecting any organ or body system. One manifestation—dental enamel defects—can help dentists and other health ...

Systemic Assessment of Patients Undergoing Dental Implant Surgeries: A Trans- and Post-operative Analysis.

Science.gov (United States)

Byakodi, Sanjay; Kumar, Sachin; Reddy, Rajesh Kumar; Kumar, Vipin; Sepolia, Shipra; Gupta, Shivangi; Singh, Harkanwal Preet

2017-01-01

Procedure-related and patient-related factors influence the prognosis of dental implants to a major extent. Hence, we aimed to evaluate and analyze various systemic factors in patients receiving dental implants. Fifty-one patients were included in the study, in which a total of 110 dental implants were placed. Complete examination of the subjects was done before and after placement of dental implants. Implant surgery was planned, and osseointegrated dental implants were placed in the subjects. Postoperative evaluation of the dental implant patients was done after 3 weeks. Anxiety levels were determined using State-Trait Anxiety Inventory (STAI) questionnaire on the surgery day and after 1 week of surgery. The participant describes how they feel at the moment by responding to twenty items as follows: (1) absolutely not, (2) slightly, (3) somewhat, or (4) very much. All the results were recorded and statistical analyzed by SPSS software. Out of 51, 29 patients were males while 22 were females, with ratio of 1.32:1. Female patients' mean age was 50.18 years while male patients' mean age was 52.71 years, with statistically nonsignificant difference between them. Functional rehabilitation was the main purpose of choosing dental implants in more than 90% of the subjects. Diameter of 3.75 mm was the shortest implants to be placed in the present study, whereas in terms of length, 8.5 mm was the shortest length of dental implant used in the present study. Tooth area in which maximum implants were placed in our study was 36 tooth region. Maximum implants were placed in Type II bone quality ( n = 38). Implants installed in the mandible were clamped more efficiently than implants placed in the maxilla ( P < 0.001). The difference of average STAI-State subscore before and after the surgery was statistically significant ( P < 0.05; significant). Mandibular dental implants show more clamping (torque) than maxillary dental implants.

Systemic assessment of patients undergoing dental implant surgeries: A trans- and post-operative analysis

Directory of Open Access Journals (Sweden)

Sanjay Byakodi

2017-01-01

Full Text Available Background: Procedure-related and patient-related factors influence the prognosis of dental implants to a major extent. Hence, we aimed to evaluate and analyze various systemic factors in patients receiving dental implants. Materials and Methods: Fifty-one patients were included in the study, in which a total of 110 dental implants were placed. Complete examination of the subjects was done before and after placement of dental implants. Implant surgery was planned, and osseointegrated dental implants were placed in the subjects. Postoperative evaluation of the dental implant patients was done after 3 weeks. Anxiety levels were determined using State-Trait Anxiety Inventory (STAI questionnaire on the surgery day and after 1 week of surgery. The participant describes how they feel at the moment by responding to twenty items as follows: (1 absolutely not, (2 slightly, (3 somewhat, or (4 very much. All the results were recorded and statistical analyzed by SPSS software. Results: Out of 51, 29 patients were males while 22 were females, with ratio of 1.32:1. Female patients' mean age was 50.18 years while male patients' mean age was 52.71 years, with statistically nonsignificant difference between them. Functional rehabilitation was the main purpose of choosing dental implants in more than 90% of the subjects. Diameter of 3.75 mm was the shortest implants to be placed in the present study, whereas in terms of length, 8.5 mm was the shortest length of dental implant used in the present study. Tooth area in which maximum implants were placed in our study was 36 tooth region. Maximum implants were placed in Type II bone quality (n = 38. Implants installed in the mandible were clamped more efficiently than implants placed in the maxilla (P < 0.001. The difference of average STAI-State subscore before and after the surgery was statistically significant (P < 0.05; significant. Conclusion: Mandibular dental implants show more clamping (torque than maxillary

Assessment of the Correlation between Appointment Scheduling and Patient Satisfaction in a Pediatric Dental Setup

Directory of Open Access Journals (Sweden)

Amar N. Katre

2014-01-01

Full Text Available Introduction. The practice of modern pediatric dentistry requires delivery of quality care in combination with adherence to excellent business as well as time management principles. A definite appointment schedule should be presented to the parents on the first or second appointment. More importantly, the prescribed schedule should be followed to the best of the professional abilities of the pediatric dentist. Aims. The aim of the study was to assess the co-relation between appointment scheduling and patient satisfaction in a pediatric dental setup with the objective of understanding the parameters related to appointment scheduling to increase patient satisfaction. Method. A total of 40 patients, who visited the Department of Pediatric and Preventive Dentistry, YMT Dental College & Hospital, for dental treatment were selected on a random basis. A questionnaire with a set of 6 questions with a rating scale of 1–5 to assess the patient satisfaction related to appointment scheduling was prepared. Results. A significant number of the patients were happy with the existing appointment scheduling system barring a few exceptions.

Waste Feed Delivery Transfer System Analysis

Energy Technology Data Exchange (ETDEWEB)

JULYK, L.J.

2000-05-05

This document provides a documented basis for the required design pressure rating and pump pressure capacity of the Hanford Site waste-transfer system in support of the waste feed delivery to the privatization contractor for vitrification. The scope of the analysis includes the 200 East Area double-shell tank waste transfer pipeline system and the associated transfer system pumps for a11 Phase 1B and Phase 2 waste transfers from AN, AP, AW, AY, and A2 Tank Farms.

Waste Feed Delivery Transfer System Analysis

International Nuclear Information System (INIS)

JULYK, L.J.

2000-01-01

This document provides a documented basis for the required design pressure rating and pump pressure capacity of the Hanford Site waste-transfer system in support of the waste feed delivery to the privatization contractor for vitrification. The scope of the analysis includes the 200 East Area double-shell tank waste transfer pipeline system and the associated transfer system pumps for a11 Phase 1B and Phase 2 waste transfers from AN, AP, AW, AY, and A2 Tank Farms

Nanoscale Nutrient Delivery Systems for Food Applications: Improving Bioactive Dispersibility, Stability, and Bioavailability.

Science.gov (United States)

McClements, David Julian

2015-07-01

There has been a surge of interest in the development of nanoscale systems for the encapsulation, protection, and delivery of lipophilic nutrients, vitamins, and nutraceuticals. This review article highlights the challenges associated with incorporating these lipophilic bioactive components into foods, and then discusses potential nanoscale delivery systems that can be used to overcome these challenges. In particular, the desirable characteristics required for any nanoscale delivery system are presented, as well as methods of fabricating them and of characterizing them. An overview of different delivery systems is given, such as microemulsions, nanoemulsions, emulsions, microgels, and biopolymer nanoparticles, and their potential applications are discussed. Nanoscale delivery systems have considerable potential within the food industry, but they must be carefully formulated to ensure that they are safe, economically viable, and effective. Nanoscale delivery systems have numerous potential applications in the food industry for encapsulating, protecting, and releasing bioactive agents, such as nutraceuticals and vitamins. This review article highlights methods for designing, fabricating, characterizing, and utilizing edible nanoparticles from a variety of different food-grade ingredients. © 2015 Institute of Food Technologists®

Buccal mucosa as a route for systemic drug delivery: a review.

Science.gov (United States)

Shojaei, A H

1998-01-01

Within the oral mucosal cavity, the buccal region offers an attractive route of administration for systemic drug delivery. The mucosa has a rich blood supply and it is relatively permeable. It is the objective of this article to review buccal drug delivery by discussing the structure and environment of the oral mucosa and the experimental methods used in assessing buccal drug permeation/absorption. Buccal dosage forms will also be reviewed with an emphasis on bioadhesive polymeric based delivery systems

A Sample Delivery System for Planetary Missions

Data.gov (United States)

National Aeronautics and Space Administration — The project will develop, test and characterize the performance of a prototype /sample delivery system (SDS) implemented as an end effector on a robotic arm capable...

Drug delivery system and breast cancer cells

Science.gov (United States)

Colone, Marisa; Kaliappan, Subramanian; Calcabrini, Annarica; Tortora, Mariarosaria; Cavalieri, Francesca; Stringaro, Annarita

2016-06-01

Recently, nanomedicine has received increasing attention for its ability to improve the efficacy of cancer therapeutics. Nanosized polymer therapeutic agents offer the advantage of prolonged circulation in the blood stream, targeting to specific sites, improved efficacy and reduced side effects. In this way, local, controlled delivery of the drug will be achieved with the advantage of a high concentration of drug release at the target site while keeping the systemic concentration of the drug low, thus reducing side effects due to bioaccumulation. Various drug delivery systems such as nanoparticles, liposomes, microparticles and implants have been demonstrated to significantly enhance the preventive/therapeutic efficacy of many drugs by increasing their bioavailability and targetability. As these carriers significantly increase the therapeutic effect of drugs, their administration would become less cost effective in the near future. The purpose of our research work is to develop a delivery system for breast cancer cells using a microvector of drugs. These results highlight the potential uses of these responsive platforms suited for biomedical and pharmaceutical applications. At the request of all authors of the paper an updated version was published on 12 July 2016. The manuscript was prepared and submitted without Dr. Francesca Cavalieri's contribution and her name was added without her consent. Her name has been removed in the updated and re-published article.

Nursing Services Delivery Theory: an open system approach

Science.gov (United States)

Meyer, Raquel M; O’Brien-Pallas, Linda L

2010-01-01

meyer r.m. & o’brien-pallas l.l. (2010)Nursing services delivery theory: an open system approach. Journal of Advanced Nursing66(12), 2828–2838. Aim This paper is a discussion of the derivation of the Nursing Services Delivery Theory from the application of open system theory to large-scale organizations. Background The underlying mechanisms by which staffing indicators influence outcomes remain under-theorized and unmeasured, resulting in a ‘black box’ that masks the nature and organization of nursing work. Theory linking nursing work, staffing, work environments, and outcomes in different settings is urgently needed to inform management decisions about the allocation of nurse staffing resources in organizations. Data sources A search of CINAHL and Business Source Premier for the years 1980–2008 was conducted using the following terms: theory, models, organization, organizational structure, management, administration, nursing units, and nursing. Seminal works were included. Discussion The healthcare organization is conceptualized as an open system characterized by energy transformation, a dynamic steady state, negative entropy, event cycles, negative feedback, differentiation, integration and coordination, and equifinality. The Nursing Services Delivery Theory proposes that input, throughput, and output factors interact dynamically to influence the global work demands placed on nursing work groups at the point of care in production subsystems. Implications for nursing The Nursing Services Delivery Theory can be applied to varied settings, cultures, and countries and supports the study of multi-level phenomena and cross-level effects. Conclusion The Nursing Services Delivery Theory gives a relational structure for reconciling disparate streams of research related to nursing work, staffing, and work environments. The theory can guide future research and the management of nursing services in large-scale healthcare organizations. PMID:20831573

Dental Calculus Arrest of Dental Caries

OpenAIRE

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human t...

Sustained subconjunctival protein delivery using a thermosetting gel delivery system.

Science.gov (United States)

Rieke, Erin R; Amaral, Juan; Becerra, S Patricia; Lutz, Robert J

2010-02-01

An effective treatment modality for posterior eye diseases would provide prolonged delivery of therapeutic agents, including macromolecules, to eye tissues using a safe and minimally invasive method. The goal of this study was to assess the ability of a thermosetting gel to deliver a fluorescently labeled protein, Alexa 647 ovalbumin, to the choroid and retina of rats following a single subconjunctival injection of the gel. Additional experiments were performed to compare in vitro to in vivo ovalbumin release rates from the gel. The ovalbumin content of the eye tissues was monitored by spectrophotometric assays of tissue extracts of Alexa 647 ovalbumin from dissected sclera, choroid, and retina at time points ranging from 2 h to 14 days. At the same time points, fluorescence microscopy images of tissue samples were also obtained. Measurement of intact ovalbumin was verified by LDS-PAGE analysis of the tissue extract solutions. In vitro release of Alexa 488 ovalbumin into 37 degrees C PBS solutions from ovalbumin-loaded gel pellets was also monitored over time by spectrophotometric assay. In vivo ovalbumin release rates were determined by measurement of residual ovalbumin extracted from gel pellets removed from rat eyes at various time intervals. Our results indicate that ovalbumin concentrations can be maintained at measurable levels in the sclera, choroid, and retina of rats for up to 14 days using the thermosetting gel delivery system. The concentration of ovalbumin exhibited a gradient that decreased from sclera to choroid and to retina. The in vitro release rate profiles were similar to the in vivo release profiles. Our findings suggest that the thermosetting gel system may be a feasible method for safe and convenient sustained delivery of proteins to choroidal and retinal tissue in the posterior segments of the eye.

Availability of a remote online hemodynamic monitoring system during treatment in a private dental office for medically high-risk patients

Directory of Open Access Journals (Sweden)

Shinya Yamazaki

2008-09-01

Full Text Available Shinya Yamazaki, Hiroyoshi Kawaai, Shigeo Sasaki, Kazuhiro Shimamura, Hiroshi Segawa, Takahiro SaitoSpecial Care Department in Dentistry, Ohu University Dental Hospital, Koriyama city, Fukushima prefecture, JapanAbstract: The importance of systemic management to prevent accidents is increasing in dentistry because co-morbid illnesses in an aging society and invasive surgical procedures are increasing. In this prefecture, a new medical system called the remote online hemodynamic monitoring system (ROHMs was started in 2001. Eight private dental offices participated in this trial. When dental practitioners feel the risk of a dental procedure, they can contact via ROHMs to this hospital. Then, the hemodynamic data (blood pressure, heart rate, ECG, SpO2, and RPP of the patient in the clinic can be transmitted here via the internet, and the images and the voice can be transmitted as well. The availability of this system was assessed in 66 patients (98 cases. The most frequent complications were hypertension, heart disease, and diabetes mellitus. Systemic management included monitoring during the dental procedure (71.4%, checking vital signs after an interview (15.3%, and monitoring under sedation (13.3%. There were 35.7% of all cases where an unscheduled procedure was necessary for the systemic management. Based on a questionnaire, the majority of the patients felt relieved and safe. This system creates a situation where a specialist is almost present during the procedure. This system will provide significant assistance for future medical cooperation for risk management.Keywords: online, high-risk patient, dental treatment, medical cooperation, medical accident, risk management

Nature engineered diatom biosilica as drug delivery systems.

Science.gov (United States)

Uthappa, U T; Brahmkhatri, Varsha; Sriram, G; Jung, Ho-Young; Yu, Jingxian; Kurkuri, Nikita; Aminabhavi, Tejraj M; Altalhi, Tariq; Neelgund, Gururaj M; Kurkuri, Mahaveer D

2018-05-14

Diatoms, unicellular photosynthetic algae covered with siliceous cell wall, are also called frustule. These are the most potential naturally available materials for the development of cost-effective drug delivery systems because of their excellent biocompatibility, high surface area, low cost and ease of surface modification. Mesoporous silica materials such as MCM-41 and SBA-15 have been extensively used in drug delivery area. Their synthesis is challenging, time consuming, requires toxic chemicals and are energy intensive, making the entire process expensive and non-viable. Therefore, it is necessary to explore alternative materials. Surprisingly, nature has provided some exciting materials called diatoms; biosilica is one such a material that can be potentially used as a drug delivery vehicle. The present review focuses on different types of diatom species used in drug delivery with respect to their structural properties, morphology, purification process and surface functionalization. In this review, recent advances along with their limitations as well as the future scope to develop them as potential drug delivery vehicles are discussed. Copyright © 2018. Published by Elsevier B.V.

Analysis and Design Information System Logistics Delivery Service in Pt Repex Wahana

Directory of Open Access Journals (Sweden)

Stephanie Surja

2015-12-01

Full Text Available Analysis and Design of Logistic Delivery System in PT Repex Wahana aims to analyze company’s need in existing business process of logistic delivery service. This will then be used in the development of an integrated system that can address the problems in the running process of sending and tracking the whereaboutsor status of the delivered goods which are the core business processes in the enterprise. The result then will be used as basis in the development of integrated information system in pursuit of corporate solution for process business automation, delivery process, inventory, and logistic delivery tracking, which is the core of the company business process, and it will be documented using Unified Modeling Language. The information system is meant to simplify the delivery and tracking process in the company, besides will minimize lost and error of data which is often happened because of the manual and unorganized transaction data processing.

Approaches and Challenges of Engineering Implantable Microelectromechanical Systems (MEMS Drug Delivery Systems for in Vitro and in Vivo Applications

Directory of Open Access Journals (Sweden)

Ken-Tye Yong

2012-11-01

Full Text Available Despite the advancements made in drug delivery systems over the years, many challenges remain in drug delivery systems for treating chronic diseases at the personalized medicine level. The current urgent need is to develop novel strategies for targeted therapy of chronic diseases. Due to their unique properties, microelectromechanical systems (MEMS technology has been recently engineered as implantable drug delivery systems for disease therapy. This review examines the challenges faced in implementing implantable MEMS drug delivery systems in vivo and the solutions available to overcome these challenges.

Oral heparin delivery: design and in vivo evaluation of a stomach-targeted mucoadhesive delivery system.

Science.gov (United States)

Schmitz, Thierry; Leitner, Verena M; Bernkop-Schnürch, Andreas

2005-05-01

Low molecular weight heparin (LMWH) is an agent of choice in the anti-coagulant therapy and prophylaxis of thrombosis and coronary syndromes. However, the therapeutic use is partially limited due to a poor oral bioavailability. It was therefore the aim of this study to design and evaluate a highly efficient stomach-targeted oral delivery system for LMWH. In order to appraise the influence of the molecular weight on the oral bioavailability, mini-tablets comprising 3 kDa (279 IU) and 6 kDa (300 IU) LMWH, respectively, were generated and tested in vivo in rats. The potential of the test formulations based on thiolated polycarbophil, was evaluated in comparison to hydroxyethylcellulose (HEC) as control carrier matrix. The plasma levels of LMWH after oral versus subcutaneous administration were determined in order to calculate the relative bioavailability. With the delivery system containing 3 kDa LMWH (279 IU) a relative bioavailability of 19.1% was achieved, offering a significantly (p thiolated polymers are a promising tool for the non-invasive stomach-targeted systemic delivery of LMWH as model for a hydrophilic macromolecular polysaccharide. Copyright 2005 Wiley-Liss, Inc

Colon-targeted oral drug delivery systems: design trends and approaches.

Science.gov (United States)

Amidon, Seth; Brown, Jack E; Dave, Vivek S

2015-08-01

Colon-specific drug delivery systems (CDDS) are desirable for the treatment of a range of local diseases such as ulcerative colitis, Crohn's disease, irritable bowel syndrome, chronic pancreatitis, and colonic cancer. In addition, the colon can be a potential site for the systemic absorption of several drugs to treat non-colonic conditions. Drugs such as proteins and peptides that are known to degrade in the extreme gastric pH, if delivered to the colon intact, can be systemically absorbed by colonic mucosa. In order to achieve effective therapeutic outcomes, it is imperative that the designed delivery system specifically targets the drugs into the colon. Several formulation approaches have been explored in the development colon-targeted drug delivery systems. These approaches involve the use of formulation components that interact with one or more aspects of gastrointestinal (GI) physiology, such as the difference in the pH along the GI tract, the presence of colonic microflora, and enzymes, to achieve colon targeting. This article highlights the factors influencing colon-specific drug delivery and colonic bioavailability, and the limitations associated with CDDS. Further, the review provides a systematic discussion of various conventional, as well as relatively newer formulation approaches/technologies currently being utilized for the development of CDDS.

Transferosomes - A vesicular transdermal delivery system for enhanced drug permeation

Directory of Open Access Journals (Sweden)

Reshmy Rajan

2011-01-01

Full Text Available Transdermal administration of drugs is generally limited by the barrier function of the skin. Vesicular systems are one of the most controversial methods for transdermal delivery of active substances. The interest in designing transdermal delivery systems was relaunched after the discovery of elastic vesicles like transferosomes, ethosomes, cubosomes, phytosomes, etc. This paper presents the composition, mechanisms of penetration, manufacturing and characterization methods of transferosomes as transdermal delivery systems of active substances. For a drug to be absorbed and distributed into organs and tissues and eliminated from the body, it must pass through one or more biological membranes/barriers at various locations. Such a movement of drug across the membrane is called as drug transport. For the drugs to be delivered to the body, they should cross the membranous barrier. The concept of these delivery systems was designed in an attempt to concentrate the drug in the tissues of interest, while reducing the amount of drug in the remaining tissues. Hence, surrounding tissues are not affected by the drug. In addition, loss of drug does not happen due to localization of drug, leading to get maximum efficacy of the medication. Therefore, the phospholipid based carrier systems are of considerable interest in this era.

Leadership Perspectives on Operationalizing the Learning Health Care System in an Integrated Delivery System.

Science.gov (United States)

Psek, Wayne; Davis, F Daniel; Gerrity, Gloria; Stametz, Rebecca; Bailey-Davis, Lisa; Henninger, Debra; Sellers, Dorothy; Darer, Jonathan

2016-01-01

Healthcare leaders need operational strategies that support organizational learning for continued improvement and value generation. The learning health system (LHS) model may provide leaders with such strategies; however, little is known about leaders' perspectives on the value and application of system-wide operationalization of the LHS model. The objective of this project was to solicit and analyze senior health system leaders' perspectives on the LHS and learning activities in an integrated delivery system. A series of interviews were conducted with 41 system leaders from a broad range of clinical and administrative areas across an integrated delivery system. Leaders' responses were categorized into themes. Ten major themes emerged from our conversations with leaders. While leaders generally expressed support for the concept of the LHS and enhanced system-wide learning, their concerns and suggestions for operationalization where strongly aligned with their functional area and strategic goals. Our findings suggests that leaders tend to adopt a very pragmatic approach to learning. Leaders expressed a dichotomy between the operational imperative to execute operational objectives efficiently and the need for rigorous evaluation. Alignment of learning activities with system-wide strategic and operational priorities is important to gain leadership support and resources. Practical approaches to addressing opportunities and challenges identified in the themes are discussed. Continuous learning is an ongoing, multi-disciplinary function of a health care delivery system. Findings from this and other research may be used to inform and prioritize system-wide learning objectives and strategies which support reliable, high value care delivery.

Heat generation caused by ablation of dental hard tissues with an ultrashort pulse laser (USPL) system.

Science.gov (United States)

Braun, Andreas; Krillke, Raphael Franz; Frentzen, Matthias; Bourauel, Christoph; Stark, Helmut; Schelle, Florian

2015-02-01

Heat generation during the removal of dental hard tissues may lead to a temperature increase and cause painful sensations or damage dental tissues. The aim of this study was to assess heat generation in dental hard tissues following laser ablation using an ultrashort pulse laser (USPL) system. A total of 85 specimens of dental hard tissues were used, comprising 45 specimens of human dentine evaluating a thickness of 1, 2, and 3 mm (15 samples each) and 40 specimens of human enamel with a thickness of 1 and 2 mm (20 samples each). Ablation was performed with an Nd:YVO4 laser at 1,064 nm, a pulse duration of 9 ps, and a repetition rate of 500 kHz with an average output power of 6 W. Specimens were irradiated for 0.8 s. Employing a scanner system, rectangular cavities of 1-mm edge length were generated. A temperature sensor was placed at the back of the specimens, recording the temperature during the ablation process. All measurements were made employing a heat-conductive paste without any additional cooling or spray. Heat generation during laser ablation depended on the dental hard tissue (enamel or dentine) and the thickness of the respective tissue (p dental hard tissues, heat generation has to be considered. Especially during laser ablation next to pulpal tissues, painful sensations and potential thermal injury of pulp tissue might occur.

Novel delivery systems with nonsteroidal anti-inflammatory drugs

Directory of Open Access Journals (Sweden)

Cvijić Sandra

2016-01-01

Full Text Available Chronic use of oral nonsteroidal anti-inflammatory drugs (NSAIDs is associated with increased risk of serious gastrointestinal side effects. Therefore, recent trends in the development of NSAIDs aim to reduce the incidence of side effects, and improve patient compliance. One of the strategies to improve efficacy and safety of oral NSAIDs is the development of combination products that contain gastroprotective agents. Several products containing NSAID in combination with proton pump inhibitors (ketoprofen/omeprazole, naproxen/esomeprazole, H2-receptor antagonists (ibuprofen/famotidine, and prostaglandin analogues (diclofenac/misoprostol are currently available on the market. Another approach refer to the special formulation design to allow dose reduction while preserving drug therapeutic efficacy. An example is SoluMatrix® technology, a manufacturing process that produce submicron-sized drug particles with enhanced dissolution and absorption properties. Patented SoluMatrix® technology has been successfully employed to develop low-dose diclofenac, meloxicam, indomethacin and naproxen products. Topical NSAID formulations enable drug delivery to target tissues, while reducing systemic exposure and concomitant side effects associated with oral NSAIDs. Dermal/transdermal NSAID delivery systems are subject of intensive investigation. So far, several 'advanced' drug delivery systems with diclofenac, ibuprofen and ketoprofen have been designed.

A clinical perspective on mucoadhesive buccal drug delivery systems

Science.gov (United States)

Gilhotra, Ritu M; Ikram, Mohd; Srivastava, Sunny; Gilhotra, Neeraj

2014-01-01

Mucoadhesion can be defined as a state in which two components, of which one is of biological origin, are held together for extended periods of time by the help of interfacial forces. Among the various transmucosal routes, buccal mucosa has excellent accessibility and relatively immobile mucosa, hence suitable for administration of retentive dosage form. The objective of this paper is to review the works done so far in the field of mucoadhesive buccal drug delivery systems (MBDDS), with a clinical perspective. Starting with a brief introduction of the mucoadhesive drug delivery systems, oral mucosa, and the theories of mucoadhesion, this article then proceeds to cover the works done so far in the field of MBDDS, categorizing them on the basis of ailments they are meant to cure. Additionally, we focus on the various patents, recent advancements, and challenges as well as the future prospects for mucoadhesive buccal drug delivery systems. PMID:24683406

Secondary fuel delivery system

Science.gov (United States)

Parker, David M.; Cai, Weidong; Garan, Daniel W.; Harris, Arthur J.

2010-02-23

A secondary fuel delivery system for delivering a secondary stream of fuel and/or diluent to a secondary combustion zone located in the transition piece of a combustion engine, downstream of the engine primary combustion region is disclosed. The system includes a manifold formed integral to, and surrounding a portion of, the transition piece, a manifold inlet port, and a collection of injection nozzles. A flowsleeve augments fuel/diluent flow velocity and improves the system cooling effectiveness. Passive cooling elements, including effusion cooling holes located within the transition boundary and thermal-stress-dissipating gaps that resist thermal stress accumulation, provide supplemental heat dissipation in key areas. The system delivers a secondary fuel/diluent mixture to a secondary combustion zone located along the length of the transition piece, while reducing the impact of elevated vibration levels found within the transition piece and avoiding the heat dissipation difficulties often associated with traditional vibration reduction methods.

Ophthalmic Drug Delivery Systems for Antibiotherapy—A Review

Science.gov (United States)

Dubald, Marion; Bourgeois, Sandrine; Andrieu, Véronique; Fessi, Hatem

2018-01-01

The last fifty years, ophthalmic drug delivery research has made much progress, challenging scientists about the advantages and limitations of this drug delivery approach. Topical eye drops are the most commonly used formulation in ocular drug delivery. Despite the good tolerance for patients, this topical administration is only focus on the anterior ocular diseases and had a high precorneal loss of drugs due to the tears production and ocular barriers. Antibiotics are popularly used in solution or in ointment for the ophthalmic route. However, their local bioavailability needs to be improved in order to decrease the frequency of administrations and the side effects and to increase their therapeutic efficiency. For this purpose, sustained release forms for ophthalmic delivery of antibiotics were developed. This review briefly describes the ocular administration with the ocular barriers and the currently topical forms. It focuses on experimental results to bypass the limitations of ocular antibiotic delivery with new ocular technology as colloidal and in situ gelling systems or with the improvement of existing forms as implants and contact lenses. Nanotechnology is presently a promising drug delivery way to provide protection of antibiotics and improve pathway through ocular barriers and deliver drugs to specific target sites. PMID:29342879

Ophthalmic Drug Delivery Systems for Antibiotherapy—A Review

Directory of Open Access Journals (Sweden)

Marion Dubald

2018-01-01

Full Text Available The last fifty years, ophthalmic drug delivery research has made much progress, challenging scientists about the advantages and limitations of this drug delivery approach. Topical eye drops are the most commonly used formulation in ocular drug delivery. Despite the good tolerance for patients, this topical administration is only focus on the anterior ocular diseases and had a high precorneal loss of drugs due to the tears production and ocular barriers. Antibiotics are popularly used in solution or in ointment for the ophthalmic route. However, their local bioavailability needs to be improved in order to decrease the frequency of administrations and the side effects and to increase their therapeutic efficiency. For this purpose, sustained release forms for ophthalmic delivery of antibiotics were developed. This review briefly describes the ocular administration with the ocular barriers and the currently topical forms. It focuses on experimental results to bypass the limitations of ocular antibiotic delivery with new ocular technology as colloidal and in situ gelling systems or with the improvement of existing forms as implants and contact lenses. Nanotechnology is presently a promising drug delivery way to provide protection of antibiotics and improve pathway through ocular barriers and deliver drugs to specific target sites.

A questionnaire study regarding local anesthesia in dentistry and safety measures in dental clinics among dental students

OpenAIRE

オオケ, ハナコ; クドウ, マサル; シンヤ, ノボル; Hanako, OHKE; Masaru, KUDO; Noboru, SHINYA

2005-01-01

This reports the results of a questionnaire study of dental students on the awareness of "local anesthesia" and "use of patient monitoring systems" in dental clinics. Subjects participated in the present study included 96 sixth year dental students (D6) and 93 first year dental students (D1). The results indicate that the majority of respondents including both D6 and D1 support the notion that a "dentist" is the most suitable person to perform local anesthesia in dental treatment. With respec...

Adamantane in Drug Delivery Systems and Surface Recognition

OpenAIRE

Adela Štimac; Marina Šekutor; Kata Mlinarić-Majerski; Leo Frkanec; Ruža Frkanec

2017-01-01

The adamantane moiety is widely applied in design and synthesis of new drug delivery systems and in surface recognition studies. This review focuses on liposomes, cyclodextrins, and dendrimers based on or incorporating adamantane derivatives. Our recent concept of adamantane as an anchor in the lipid bilayer of liposomes has promising applications in the field of targeted drug delivery and surface recognition. The results reported here encourage the development of novel adamantane-based struc...

Solid Lipid Nanoparticles as Efficient Drug and Gene Delivery Systems: Recent Breakthroughs

Directory of Open Access Journals (Sweden)

Jafar Ezzati Nazhad Dolatabadi

2015-06-01

Full Text Available In recent years, nanomaterials have been widely applied as advanced drug and gene delivery nanosystems. Among them, solid lipid nanoparticles (SLNs have attracted great attention as colloidal drug delivery systems for incorporating hydrophilic or lipophilic drugs and various macromolecules as well as proteins and nucleic acids. Therefore, SLNs offer great promise for controlled and site specific drug and gene delivery. This article includes general information about SLN structures and properties, production procedures, characterization. In addition, recent progress on development of drug and gene delivery systems using SLNs was reviewed.

A Qualitative Evaluation of Clinical Audit in UK Dental Foundation Training.

Science.gov (United States)

Thornley, Peter; Quinn, Alyson

2017-11-10

Clinical Audit (CA) has been recognized as a useful tool for tool for improving service delivery, clinical governance, and the education and performance of the dental team. This study develops the discussion by investigating its use as an educational tool within UK Dental Foundation Training (DFT). The aim was to investigate the views of Foundation Dentists (FDs) and Training Programme Directors (TPDs) on the CA module in their FD training schemes, to provide insight and recommendations for those supervising and undertaking CA. A literature review was conducted followed by a qualitative research methodology, using group interviews. The interviews were transcribed and thematically analyzed using NVIVO, a Computer-Assisted Qualitative Data Analysis tool. CA was found to be a useful tool for teaching management and professionalism and can bring some improvement to clinical practice, but TPDs have doubts about the long-term effects on service delivery. The role of the Educational Supervisor (ES) is discussed and recommendations are given for those supervising and conducting CA.

A Qualitative Evaluation of Clinical Audit in UK Dental Foundation Training

Directory of Open Access Journals (Sweden)

Peter Thornley

2017-11-01

Full Text Available Clinical Audit (CA has been recognized as a useful tool for tool for improving service delivery, clinical governance, and the education and performance of the dental team. This study develops the discussion by investigating its use as an educational tool within UK Dental Foundation Training (DFT. The aim was to investigate the views of Foundation Dentists (FDs and Training Programme Directors (TPDs on the CA module in their FD training schemes, to provide insight and recommendations for those supervising and undertaking CA. A literature review was conducted followed by a qualitative research methodology, using group interviews. The interviews were transcribed and thematically analyzed using NVIVO, a Computer-Assisted Qualitative Data Analysis tool. CA was found to be a useful tool for teaching management and professionalism and can bring some improvement to clinical practice, but TPDs have doubts about the long-term effects on service delivery. The role of the Educational Supervisor (ES is discussed and recommendations are given for those supervising and conducting CA.

Success rate of IR midazolam sedation in combination with C-CLAD in pediatric dental patients—a prospective observational study

Directory of Open Access Journals (Sweden)

Malka Ashkenazi

2014-03-01

Full Text Available Objective. To evaluate the success rate of intra-rectal (IR midazolam in combination with nitrous oxide/oxygen (N2O sedation in young uncooperative dental patients when the local anesthesia is delivered by a computerized controlled local anesthetic delivery (C-CLAD.Study Design. This observational study consisted of 219 uncooperative children (age: 4.3 ± 1.69 y who received IR midazolam (0.4 mg/kg and N2O to complete their dental treatment. Measured variables included: child’s pain disruptive behavior during delivery of anesthesia by C-CLAD (CHEOP Scale, child behavior during treatment (Houpt scale, dental procedure performed, and side effects that appeared during treatment.Results. There was a high level of cooperation (mean score: 6.69 ± 2.1 during administration of local anesthesia. Good-to-excellent behavior was shown by 87% of the children during treatment. Planned treatment was completed by 184 (92% patients. No statistically significant changes were noticed in the oxygen saturation levels before and after treatment. Children with side effects included 3 (1.3% with nistagmus, 5 (2.3% with diplopia, and 18 (8.2% with hiccups. Three consecutive sedations decreased the overall behavior score by 5.7% compared to the first appointment (p < .05.Conclusions. IR midazolam-N2O sedation in combination with C-CLAD is very effective for delivery of dental treatment to young uncooperative children.

Waste feed delivery program systems engineering implementation plan

International Nuclear Information System (INIS)

O'Toole, S.M.; Hendel, B.J.

1998-01-01

This document defines the systems engineering processes and products planned by the Waste Feed Delivery Program to develop the necessary and sufficient systems to provide waste feed to the Privatization Contractor for Phase 1. It defines roles and responsibilities for the performance of the systems engineering processes and generation of products

Safe Active Scanning for Energy Delivery Systems Final Report

Energy Technology Data Exchange (ETDEWEB)

Helms, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Salazar, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Scheibel, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Engels, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reiger, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-30

The Department of Energy’s Cybersecurity for Energy Delivery Systems Program has funded Safe(r) Active Scanning for Energy Delivery Systems, led by Lawrence Livermore National Laboratory, to investigate and analyze the impacts of active scanning in the operational environment of energy delivery systems. In collaboration with Pacific Northwest National Laboratory and Idaho National Laboratory, active scans across three testbeds including 38 devices were performed. This report gives a summary of the initial literature survey performed on the SASEDS project as well as industry partner interview summaries and main findings from Phase 1 of the project. Additionally, the report goes into the details of scanning techniques, methodologies for testing, testbed descriptions, and scanning results, with appendices to elaborate on the specific scans that were performed. As a result of testing, a single device out of 38 exhibited problems when actively scanned, and a reboot was required to fix it. This single failure indicates that active scanning is not likely to have a detrimental effect on the safety and resilience of energy delivery systems. We provide a path forward for future research that could enable wide adoption of active scanning and lead utilities to incorporate active scanning as part of their default network security plans to discover and rectify rogue devices, adversaries, and services that may be on the network. This increased network visibility will allow operational technology cybersecurity practitioners to improve their situational awareness of networks and their vulnerabilities.

Svelte Integrated Delivery System Performance Examined Through Diagnostic Catheter Delivery : The SPEED Registry

NARCIS (Netherlands)

Khattab, Ahmed A.; Nijhoff, Freek; Schofer, Joachim; Berland, Jacques; Meier, Bernhard; Nietlispach, Fabian; Agostoni, Pierfrancesco; Brucks, Steffen; Stella, Pieter

2015-01-01

Aims: The multi-center SPEED registry evaluated the procedural success and in-hospital clinical outcomes of direct stenting with the Svelte 'all-in-one' coronary stent Integrated Delivery System (IDS) through diagnostic catheters to identify the clinical indications for which this approach is

Regional Multiteam Systems in Cancer Care Delivery

Science.gov (United States)

Monson, John R.T.; Rizvi, Irfan; Savastano, Ann; Green, James S.A.; Sevdalis, Nick

2016-01-01

Teamwork is essential for addressing many of the challenges that arise in the coordination and delivery of cancer care, especially for the problems that are presented by patients who cross geographic boundaries and enter and exit multiple health care systems at various times during their cancer care journeys. The problem of coordinating the care of patients with cancer is further complicated by the growing number of treatment options and modalities, incompatibilities among the vast variety of technology platforms that have recently been adopted by the health care industry, and competing and misaligned incentives for providers and systems. Here we examine the issue of regional care coordination in cancer through the prism of a real patient journey. This article will synthesize and elaborate on existing knowledge about coordination approaches for complex systems, in particular, in general and cancer care multidisciplinary teams; define elements of coordination derived from organizational psychology and human factors research that are applicable to team-based cancer care delivery; and suggest approaches for improving multidisciplinary team coordination in regional cancer care delivery and avenues for future research. The phenomenon of the mobile, multisystem patient represents a growing challenge in cancer care. Paradoxically, development of high-quality, high-volume centers of excellence and the ease of virtual communication and data sharing by using electronic medical records have introduced significant barriers to effective team-based cancer care. These challenges urgently require solutions. PMID:27650833

Using grey literature to prepare pharmacy students for an evolving healthcare delivery system.

Science.gov (United States)

Happe, Laura E; Walker, Desiree'

2013-05-13

To assess the impact of using "grey literature" (information internally produced in print or electronic format by agencies such as hospitals, government, businesses, etc) rather than a textbook in a course on healthcare delivery systems on students' perception of the relevance of healthcare delivery system topics and their ability to identify credible sources of this information. A reading from the grey literature was identified and assigned to the students for each topic in the course. Pre- and post-course survey instruments were used for the assessment. Students reported healthcare delivery systems topics to be moderately relevant to the profession of pharmacy on both the pre- and post-course survey instruments. Students' knowledge of current and credible sources of information on healthcare delivery system topics significantly improved based on self-reports and scores on objective assessments (pgrey literature in a course on healthcare delivery systems can be used to ensure that information in the pharmacy school curriculum is the most current and credible information available.

Smartphones and dental trauma: the current availability of apps for managing traumatic dental injuries.

Science.gov (United States)

Djemal, Serpil; Singh, Parmjit

2016-02-01

There is a general consensus regarding the lack of awareness regarding the emergency management of traumatic dental injuries amongst laypersons and dental professionals. This article aims to provide an overview of the apps available for traumatic dental injuries using smartphones. These apps may serve as a gateway for raising awareness of traumatic dental injuries. Three smartphone devices were used to access their respective app stores (Nokia Lumia 635 with Windows Phone OS 8.1; iPhone 5 with iOS 8.1; Samsung Galaxy Ace II with Android OS v2.3.6 Gingerbread). Nine phrases were searched: broken tooth/teeth; chipped tooth/teeth; dental emergency; dental injury; dental trauma; fractured tooth/teeth; knocked-out tooth/teeth; tooth/teeth injury; and tooth/teeth trauma. Seven apps for the Android and one app for the Apple operating system were relevant. The only Apple iOS app retrieved (Dental Trauma) was also found for the Android OS (Dental Trauma First Aid) and had the endorsement of the International Association of Dental Traumatology. AcciDent was the only app dedicated to traumatic dental injuries targeted solely towards dental professionals. Five other apps (Chipped Tooth Solution, Dental Crown Repair, Fixing Cracked Tooth, Repairing the Front Tooth and Solution to Broken Tooth) appeared to come from the same source (KBES). No traumatic dental injury apps were found for the Windows Phone OS. There are apps available for both patients and dentists that range in quality and on the whole lack real-life photographs. Future apps should continue to provide good quality, evidence-based and validated material. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Effects of Rating Training on Inter-Rater Consistency for Developing a Dental Hygiene Clinical Rater Qualification System

Directory of Open Access Journals (Sweden)

Jeong Ran Park

2007-12-01

Full Text Available We tried to develop itemized evaluation criteria and a clinical rater qualification system through rating training of inter-rater consistency for experienced clinical dental hygienists and dental hygiene clinical educators. A total of 15 clinical dental hygienists with 1-year careers participated as clinical examination candidates, while 5 dental hygienists with 3-year educations and clinical careers or longer participated as clinical raters. They all took the clinical examination as examinees. The results were compared, and the consistency of competence was measured. The comparison of clinical competence between candidates and clinical raters showed that the candidate group?占퐏 mean clinical competence ranged from 2.96 to 3.55 on a 5-point system in a total of 3 instruments (Probe, Explorer, Curet, while the clinical rater group?占퐏 mean clinical competence ranged from 4.05 to 4.29. There was a higher inter-rater consistency after education of raters in the following 4 items: Probe, Explorer, Curet, and insertion on distal surface. The mean score distribution of clinical raters ranged from 75% to 100%, which was more uniform in the competence to detect an artificial calculus than that of candidates (25% to 100%. According to the above results, there was a necessity in the operating clinical rater qualification system for comprehensive dental hygiene clinicians. Furthermore, in order to execute the clinical rater qualification system, it will be necessary to keep conducting a series of studies on educational content, time, frequency, and educator level.

Effect of Different Disinfection Protocols on Microbial and Biofilm Contamination of Dental Unit Waterlines in Community Dental Practices

Directory of Open Access Journals (Sweden)

Laura Dallolio

2014-02-01

Full Text Available Output water from dental unit waterlines (DUWLs may be a potential source of infection for both dental healthcare staff and patients. This study compared the efficacy of different disinfection methods with regard to the water quality and the presence of biofilm in DUWLs. Five dental units operating in a public dental health care setting were selected. The control dental unit had no disinfection system; two were disinfected intermittently with peracetic acid/hydrogen peroxide 0.26% and two underwent continuous disinfection with hydrogen peroxide/silver ions (0.02% and stabilized chlorine dioxide (0.22%, respectively. After three months of applying the disinfection protocols, continuous disinfection systems were more effective than intermittent systems in reducing the microbial contamination of the water, allowing compliance with the CDC guidelines and the European Council regulatory thresholds for drinking water. P. aeruginosa, Legionella spp, sulphite-reducing Clostridium spores, S. aureus and β-haemolytic streptococci were also absent from units treated with continuous disinfection. The biofilm covering the DUWLs was more extensive, thicker and more friable in the intermittent disinfection dental units than in those with continuous disinfection. Overall, the findings showed that the products used for continuous disinfection of dental unit waterlines showed statistically better results than the intermittent treatment products under the study conditions.

Effect of different disinfection protocols on microbial and biofilm contamination of dental unit waterlines in community dental practices.

Science.gov (United States)

Dallolio, Laura; Scuderi, Amalia; Rini, Maria S; Valente, Sabrina; Farruggia, Patrizia; Sabattini, Maria A Bucci; Pasquinelli, Gianandrea; Acacci, Anna; Roncarati, Greta; Leoni, Erica

2014-02-18

Output water from dental unit waterlines (DUWLs) may be a potential source of infection for both dental healthcare staff and patients. This study compared the efficacy of different disinfection methods with regard to the water quality and the presence of biofilm in DUWLs. Five dental units operating in a public dental health care setting were selected. The control dental unit had no disinfection system; two were disinfected intermittently with peracetic acid/hydrogen peroxide 0.26% and two underwent continuous disinfection with hydrogen peroxide/silver ions (0.02%) and stabilized chlorine dioxide (0.22%), respectively. After three months of applying the disinfection protocols, continuous disinfection systems were more effective than intermittent systems in reducing the microbial contamination of the water, allowing compliance with the CDC guidelines and the European Council regulatory thresholds for drinking water. P. aeruginosa, Legionella spp, sulphite-reducing Clostridium spores, S. aureus and β-haemolytic streptococci were also absent from units treated with continuous disinfection. The biofilm covering the DUWLs was more extensive, thicker and more friable in the intermittent disinfection dental units than in those with continuous disinfection. Overall, the findings showed that the products used for continuous disinfection of dental unit waterlines showed statistically better results than the intermittent treatment products under the study conditions.

Application of mathematical modeling in sustained release delivery systems.

Science.gov (United States)

Grassi, Mario; Grassi, Gabriele

2014-08-01

This review, presenting as starting point the concept of the mathematical modeling, is aimed at the physical and mathematical description of the most important mechanisms regulating drug delivery from matrix systems. The precise knowledge of the delivery mechanisms allows us to set up powerful mathematical models which, in turn, are essential for the design and optimization of appropriate drug delivery systems. The fundamental mechanisms for drug delivery from matrices are represented by drug diffusion, matrix swelling, matrix erosion, drug dissolution with possible recrystallization (e.g., as in the case of amorphous and nanocrystalline drugs), initial drug distribution inside the matrix, matrix geometry, matrix size distribution (in the case of spherical matrices of different diameter) and osmotic pressure. Depending on matrix characteristics, the above-reported variables may play a different role in drug delivery; thus the mathematical model needs to be built solely on the most relevant mechanisms of the particular matrix considered. Despite the somewhat diffident behavior of the industrial world, in the light of the most recent findings, we believe that mathematical modeling may have a tremendous potential impact in the pharmaceutical field. We do believe that mathematical modeling will be more and more important in the future especially in the light of the rapid advent of personalized medicine, a novel therapeutic approach intended to treat each single patient instead of the 'average' patient.

Dual-Functionalized Graphene Oxide Based siRNA Delivery System for Implant Surface Biomodification with Enhanced Osteogenesis.

Science.gov (United States)

Zhang, Li; Zhou, Qing; Song, Wen; Wu, Kaimin; Zhang, Yumei; Zhao, Yimin

2017-10-11

Surface functionalization by small interfering RNA (siRNA) is a novel strategy for improved implant osseointegration. A gene delivery system with safety and high transfection activity is a crucial factor for an siRNA-functionalized implant to exert its biological function. To this end, polyethylene glycol (PEG) and polyethylenimine (PEI) dual-functionalized graphene oxide (GO; nGO-PEG-PEI) may present a promising siRNA vector. In this study, nanosized nGO-PEG-PEI was prepared and optimized for siRNA delivery. Titania nanotubes (NTs) fabricated by anodic oxidation were biomodified with nGO-PEG-PEI/siRNA by cathodic electrodeposition, designated as NT-GPP/siRNA. NT-GPP/siRNA possessed benign cytocompatibility, as evaluated by cell adhesion and proliferation. Cellular uptake and knockdown efficiency of the NT-GPP/siRNA were assessed by MC3T3-E1 cells, which exhibited high siRNA delivery efficiency and sustained target gene silencing. Casein kinase-2 interacting protein-1 (Ckip-1) is a negative regulator of bone formation. siRNA-targeting Ckip-1 (siCkip-1) was introduced to the implant, and a series of in vitro and in vivo experiments were carried out to evaluate the osteogenic capacity of NT-GPP/siCkip-1. NT-GPP/siCkip-1 dramatically improved the in vitro osteogenic differentiation of MC3T3-E1 cells in terms of improved osteogenesis-related gene expression, and increased alkaline phosphatase (ALP) production, collagen secretion, and extracellular matrix (ECM) mineralization. Moreover, NT-GPP/siCkip-1 led to apparently enhanced in vivo osseointegration, as indicated by histological staining and EDX line scanning. Collectively, these findings suggest that NT-GPP/siRNA represents a practicable and promising approach for implant functionalization, showing clinical potential for dental and orthopedic applications.

Multi-Course Comparison of Traditional versus Web-based Course Delivery Systems

Directory of Open Access Journals (Sweden)

J. Michael Weber, PhD.,

2007-07-01

Full Text Available The purpose of this paper is to measure and compare the effectiveness of a Web-based course delivery system to a traditional course delivery system. The results indicate that a web-based course is effective and equivalent to a traditional classroom environment. As with the implementation of all new technologies, there are some pros and cons that should be considered. The significant pro is the element of convenience which eliminates the constrictive boundaries of space and time. The most notable con involves the impersonal nature of the online environment. Overall, we found the web-based course delivery system to be very successful in terms of learning outcomes and student satisfaction.

Making the Invisible Visible: A Model for Delivery Systems in Adult Education

Science.gov (United States)

Alex, Jennifer L.; Miller, Elizabeth A.; Platt, R. Eric; Rachal, John R.; Gammill, Deidra M.

2007-01-01

Delivery systems are not well defined in adult education. Therefore, this article reviews the multiple components that overlap to affect the adult learner and uses them to create a model for a comprehensive delivery system in adult education with these individual components as sub-systems that are interrelated and inter-locked. These components…

A Prototype Educational Delivery System Using Water Quality Monitoring as a Model.

Science.gov (United States)

Glazer, Richard B.

This report describes the model educational delivery system used by Ulster County Community College in its water quality monitoring program. The educational delivery system described in the report encompasses the use of behavioral objectives as its foundation and builds upon this foundation to form a complete system whose outcomes can be measured,…

Protamine-based nanoparticles as new antigen delivery systems.

Science.gov (United States)

González-Aramundiz, José Vicente; Peleteiro Olmedo, Mercedes; González-Fernández, África; Alonso Fernández, María José; Csaba, Noemi Stefánia

2015-11-01

The use of biodegradable nanoparticles as antigen delivery vehicles is an attractive approach to overcome the problems associated with the use of Alum-based classical adjuvants. Herein we report, the design and development of protamine-based nanoparticles as novel antigen delivery systems, using recombinant hepatitis B surface antigen as a model viral antigen. The nanoparticles, composed of protamine and a polysaccharide (hyaluronic acid or alginate), were obtained using a mild ionic cross-linking technique. The size and surface charge of the nanoparticles could be modulated by adjusting the ratio of the components. Prototypes with optimal physicochemical characteristics and satisfactory colloidal stability were selected for the assessment of their antigen loading capacity, antigen stability during storage and in vitro and in vivo proof-of-concept studies. In vitro studies showed that antigen-loaded nanoparticles induced the secretion of cytokines by macrophages more efficiently than the antigen in solution, thus indicating a potential adjuvant effect of the nanoparticles. Finally, in vivo studies showed the capacity of these systems to trigger efficient immune responses against the hepatitis B antigen following intramuscular administration, suggesting the potential interest of protamine-polysaccharide nanoparticles as antigen delivery systems. Copyright © 2015 Elsevier B.V. All rights reserved.

Dental erosion in groups of Yemeni children and adolescents and the modification of an erosion partial recording system

OpenAIRE

Al-Ashtal, Amin Mohsen Saleh; Johansson, Anders; Ridwaan, Omar; Johansson, Ann-Katrin

2016-01-01

Background: Dental erosion is a multifactorial oral health problem with an increasing prevalence among children and adolescents in many countries. Awareness of the condition among lay people is generally lacking, and methods for its clinical grading also need further improvements. Aim: The aims of this thesis was to investigate various aspects of dental erosion including prevalence and risk indicators, to evaluate the recording system used, and to assess the awareness of dental erosion in ...

Multi-Course Comparison of Traditional versus Web-Based Course Delivery Systems

Science.gov (United States)

Weber, J. Michael; Lennon, Ron

2007-01-01

The purpose of this paper is to measure and compare the effectiveness of a Web-based course delivery system to a traditional course delivery system. The results indicate that a web-based course is effective and equivalent to a traditional classroom environment. As with the implementation of all new technologies, there are some pros and cons that…

Optimization of dental implantation

Science.gov (United States)

Dol, Aleksandr V.; Ivanov, Dmitriy V.

2017-02-01

Modern dentistry can not exist without dental implantation. This work is devoted to study of the "bone-implant" system and to optimization of dental prostheses installation. Modern non-invasive methods such as MRI an 3D-scanning as well as numerical calculations and 3D-prototyping allow to optimize all of stages of dental prosthetics. An integrated approach to the planning of implant surgery can significantly reduce the risk of complications in the first few days after treatment, and throughout the period of operation of the prosthesis.

Liposomal drug delivery system from laboratory to clinic

Directory of Open Access Journals (Sweden)

Kshirsagar N

2005-01-01

Full Text Available The main objective of drug delivery systems is to deliver a drug effectively, specifically to the site of action and to achieve greater efficacy and minimise the toxic effects compared to conventional drugs. Amongst various carrier systems, liposomes have generated a great interest because of their versatility. Liposomes are vesicular concentric bilayered structures, which are biocompatible, biodegradable and nonimmumnogenic. They can control the delivery of drugs by targeting the drug to the site of action or by site avoidance drug delivery or by prolonged circulation of drugs. Amphotericin B (Amp B remains the drug of choice in most systemic mycoses and also as a second line treatment for Kala azar. However, its toxic effects often limit its use. Although the liposome delivery system has been tried for several drugs, only a few have been used in patients due to the slow development of necessary large-scale pharmaceutical procedures. This paper reviews the development of the technique for liposomal Amphotericin B (L-Amp-LRC-1, FungisomeTM drug delivery system in our laboratory in collaboration with the department of Biochemistry, Delhi University in India and proving the safety and efficacy of this preparation in clinical practice. It also attempts to compare the efficacy and benefits of our product for Indian patients with those of similar products and it includes facts from the publications that flowed from our work. As compared to conventional Amp B, Fungisome is infused over a much shorter period requiring a smaller volume and no premedication. It was found to be safe in patients who had developed serious unacceptable toxicity with conventional Amp B. In renal transplant patients, Fungisome did not produce any nephrotoxicity. Fungisome is effective in fungal infections resistant to fluconazole, conventional Amp B and in virgin and resistant cases of visceral leishmaniasis. The cost of any drug is of great significance, especially in India

Using DNA nanotechnology to produce a drug delivery system

International Nuclear Information System (INIS)

La, Thi Huyen; Nguyen, Thi Thu Thuy; Pham, Van Phuc; Nguyen, Thi Minh Huyen; Le, Quang Huan

2013-01-01

Drug delivery to cancer cells in chemotherapy is one of the most advanced research topics. The effectiveness of the current cancer treatment drugs is limited because they are not capable of distinguishing between cancer cells and normal cells so that they kill not only cancer cells but also normal ones. To overcome this disadvantage by profiting from the differences in physical and chemical properties between cancer and normal cells, nanoparticles (NPs) delivering a drug are designed in a specific manner such that they can distinguish the cancer cells from the normal ones and are targeted only to the cancer cells. Currently, there are various drug delivery systems with many advantages, but sharing some common disadvantages such as difficulty with controlling the size, low encapsulation capacity and low stability. With the development and success of DNA nanotechnology, DNA strands are used to create effective drug delivery NPs with precisely controlled size and structure, safety and high stability. This article presents our study on drug encapsulation in DNA nanostructure which loaded docetaxel and curcumin in a desire to create a new and effective drug delivery system with high biological compatibility. (paper)

Film forming systems for topical and transdermal drug delivery

Directory of Open Access Journals (Sweden)

Kashmira Kathe

2017-11-01

Full Text Available Skin is considered as an important route of administration of drugs for both local and systemic effects. The effectiveness of topical therapy depends on the physicochemical properties of the drug and adherence of the patient to the treatment regimen as well as the system's ability to adhere to skin during the therapy so as to promote drug penetration through the skin barrier. Conventional formulations for topical and dermatological administration of drugs have certain limitations like poor adherence to skin, poor permeability and compromised patient compliance. For the treatment of diseases of body tissues and wounds, the drug has to be maintained at the site of treatment for an effective period of time. Topical film forming systems are such developing drug delivery systems meant for topical application to the skin, which adhere to the body, forming a thin transparent film and provide delivery of the active ingredients to the body tissue. These are intended for skin application as emollient or protective and for local action or transdermal penetration of medicament for systemic action. The transparency is an appreciable feature of this polymeric system which greatly influences the patient acceptance. In the current discussion, the film forming systems are described as a promising choice for topical and transdermal drug delivery. Further the various types of film forming systems (sprays/solutions, gels and emulsions along with their evaluation parameters have also been reviewed.

Solubility enhancement and delivery systems of curcumin a herbal medicine: a review.

Science.gov (United States)

Hani, Umme; Shivakumar, H G

2014-01-01

Curcumin diferuloylmethane is a main yellow bioactive component of turmeric, possess wide spectrum of biological actions. It was found to have anti-inflammatory, antioxidant, anticarcinogenic, antimutagenic, anticoagulant, antifertility, antidiabetic, antibacterial, antifungal, antiprotozoal, antiviral, antifibrotic, antivenom, antiulcer, hypotensive and hypocholesteremic activities. However, the benefits are curtailed by its extremely poor aqueous solubility, which subsequently limits the bioavailability and therapeutic effects of curcumin. Nanotechnology is the available approach in solving these issues. Therapeutic efficacy of curcumin can be utilized effectively by doing improvement in formulation properties or delivery systems. Numerous attempts have been made to design a delivery system of curcumin. Currently, nanosuspensions, micelles, nanoparticles, nano-emulsions, etc. are used to improve the in vitro dissolution velocity and in vivo efficiency of curcumin. This review focuses on the methods to increase solubility of curcumin and various nanotechnologies based delivery systems and other delivery systems of curcumin.

Engaging Faculty in Telecommunications-Based Instructional Delivery Systems.

Science.gov (United States)

Swalec, John J.

In the design and development of telecommunications-based instructional delivery systems, attention to faculty involvement and training is often overlooked until the system is operational. The Waubonsee Telecommunications Instructional Consortium (TIC), in Illinois, is one network that benefited from early faculty input. Even before the first…

Immunological Risk of Injectable Drug Delivery Systems

NARCIS (Netherlands)

Jiskoot, W.; van Schie, R.M.F.; Carstens, M.G.; Schellekens, H.

2009-01-01

Injectable drug delivery systems (DDS) such as particulate carriers and water-soluble polymers are being used and developed for a wide variety of therapeutic applications. However, a number of immunological risks with serious clinical implications are associated with administration of DDS. These

Recent Advances in Ocular Drug Delivery Systems

Directory of Open Access Journals (Sweden)

Shinobu Fujii

2011-01-01

Full Text Available Transport of drugs applied by traditional dosage forms is restricted to the eye, and therapeutic drug concentrations in the target tissues are not maintained for a long duration since the eyes are protected by a unique anatomy and physiology. For the treatment of the anterior segment of the eye, various droppable products to prolong the retention time on the ocular surface have been introduced in the market. On the other hand, direct intravitreal implants, using biodegradable or non-biodegradable polymer technology, have been widely investigated for the treatment of chronic vitreoretinal diseases. There is urgent need to develop ocular drug delivery systems which provide controlled release for the treatment of chronic diseases, and increase patient’s and doctor’s convenience to reduce the dosing frequency and invasive treatment. In this article, progress of ocular drug delivery systems under clinical trials and in late experimental stage is reviewed.

[Advances of tumor targeting peptides drug delivery system with pH-sensitive activities].

Science.gov (United States)

Ma, Yin-yun; Li, Li; Huang, Hai-feng; Gou, San-hu; Ni, Jing-man

2016-05-01

The pH-sensitive peptides drug delivery systems, which target to acidic extracellular environment of tumor tissue, have many advantages in drug delivery. They exhibit a high specificity to tumor and low cytotoxicity, which significantly increase the efficacy of traditional anti-cancer drugs. In recent years the systems have received a great attention. The pH-sensitive peptides drug delivery systems can be divided into five types according to the difference in pH-responsive mechanism,type of peptides and carrier materials. This paper summarizes the recent progresses in the field with a focus on the five types of pH-sensitive peptides in drug delivery systems. This may provide a guideline to design and application of tumor targeting drugs.

State-sponsored dental terrorism?

Science.gov (United States)

Kelleher, M

2017-11-24

Has the state's manipulation of the NHS dental contract systems deliberately, or accidentally, had corrupting effects on the behaviours of some members of the dental profession? If the answer is 'possibly' or 'probably', then obvious questions that follow include, 'was this done deliberately' and if so, 'why'? Could this have been done for largely altruistic reasons, or was it done to achieve government control for minimum cost? Might this have been undertaken for political, financial or ideological reasons - regardless of any adverse longer term consequences for some patients or for some dental professionals? Might it have been done to take greater control of the dental profession on the grounds that all professions are a conspiracy against the laity, as the mildly paranoid George Bernard Shaw once alleged? Is it possible that some of this manipulation might have been done to help to disempower yet another profession, allegedly to 'modernise it', but perhaps to enslave it for its own reasons? Was this just another example of some statist politicians wanting to interfere in all aspects of UK society, regardless of their lack of specific understanding, or any proven expertise, in many areas? Could the state's manipulation of contracts and processes be regarded as an abuse of power by a virtual monopoly, which has been used to control a largely altruistic profession by imposing corrupting NHS dental contract systems with the most recent one involving 'units of dental activity' (UDAs)? Perhaps it was really about some politicians wanting ever more power, control or money - their usual drivers - with the dental and medical professions accidentally becoming casualties?

Process development work plan for waste feed delivery system

International Nuclear Information System (INIS)

Papp, I.G.

1998-01-01

This work plan defines the process used to develop project definition for Waste Feed Delivery (WFD). Project definition provides the direction for development of definitive design media required for the ultimate implementation of operational processing hardware and software. Outlines for the major deliverables are attached as appendices. The implementation of hardware and software will accommodate requirements for safe retrieval and delivery of waste currently stored in Hanford's underground storage tanks. Operations and maintenance ensure the availability of systems, structures, and components for current and future planned operations within the boundary of the Tank Waste Remediation System (TWRS) authorization basis

Integrated delivery systems: the cure for fragmentation.

Science.gov (United States)

Enthoven, Alain C

2009-12-01

Our healthcare system is fragmented, with a misalignment of incentives, or lack of coordination, that spawns inefficient allocation of resources. Fragmentation adversely impacts quality, cost, and outcomes. Eliminating waste from unnecessary, unsafe care is crucial for improving quality and reducing costs--and making the system financially sustainable. Many believe this can be achieved through greater integration of healthcare delivery, more specifically via integrated delivery systems (IDSs). An IDS is an organized, coordinated, and collaborative network that links various healthcare providers to provide a coordinated, vertical continuum of services to a particular patient population or community. It is also accountable, both clinically and fiscally, for the clinical outcomes and health status of the population or community served, and has systems in place to manage and improve them. The marketplace already contains numerous styles and degrees of integration, ranging from Kaiser Permanente-style full integration, to more loosely organized individual practice associations, to public-private partnerships. Evidence suggests that IDSs can improve healthcare quality, improve outcomes, and reduce costs--especially for patients with complex needs--if properly implemented and coordinated. No single approach or public policy will fix the fragmented healthcare system, but IDSs represent an important step in the right direction.

Flipping a Dental Anatomy Course: A Retrospective Study Over Four Years

Directory of Open Access Journals (Sweden)

Mahmoud M. Bakr

2016-01-01

Full Text Available Flipped classrooms have been successfully used to increase student engagement and support student learning in a range of educational fields, including health education. These advantages for student learning supported implementation of the flipped classroom in introductory sciences and preclinical courses in dental education. We report on a 4-year retrospective study which compared two methods of delivery of a first-year dental anatomy course. The first method used the traditional method, consisting of face to face contact teaching hours, which was compared to a partial flipped classroom, where lecture contact was maintained but practical classes were flipped. A series of online videos demonstrating different practical tasks such as wax carving and tooth identification. An online digital library and online quizzes for self-reflected learning were developed and trialled. Students’ Evaluations of Course (SEC and students’ overall performance in practical and theoretical assessments were used to evaluate the impact on student engagement and success, respectively, after implementation of the modified course offerings. This study evidences the success of the transition to a partially flipped course design. Careful design and consideration of implementation of the flipped classroom method in dental education are recommended to ensure that there is reliable availability of online resources and dedicated teaching staff for construction of resources and delivery of relevant in-class activities.

Buccal Transmucosal Delivery System of Enalapril for Improved ...

African Journals Online (AJOL)

Methods: Transmucosal drug delivery systems of enalapril maleate were ... Index Medicus, JournalSeek, Journal Citation Reports/Science Edition, Directory of Open Access Journals. (DOAJ) ... investigated for various drugs including protein.

Nano-microdelivery systems for oral delivery of an active ingredient

DEFF Research Database (Denmark)

2014-01-01

A composition for oral delivery of one or more active ingredients in the form of a lipid nano-micro-delivery system comprising a lipid nano-micro-structure comprising at least one lipid and at least one active ingredient, said at least one active ingredient being immobilized in said lipid nano...

Community feedback on the JustMilk Nipple Shield Delivery System ...

African Journals Online (AJOL)

Background. Infant medication administration is a major public-health challenge, especially in rural or low-resource areas. The JustMilk Nipple Shield Delivery System (NSDS) is a novel method of infant medication delivery designed to address some of these challenges. Objective. To explore the acceptability of the JustMilk ...

Formulation and characterization of lipid-based drug delivery system of raloxifene-microemulsion and self-microemulsifying drug delivery system

Directory of Open Access Journals (Sweden)

Hetal Thakkar

2011-01-01

Full Text Available Background : Raloxifene, a second-generation selective estrogen receptor modulator (SERM used to prevent osteoporosis in postmenopausal women is administered orally in the form of a tablet. The absolute bioavailability of the drug is only 2% because of extensive hepatic first-pass metabolism. Lipid-based formulations are reported to reduce the first-pass metabolism by promoting its lymphatic uptake. Materials and Methods : In the present investigation, microemulsion and Self-Microemulsifying Drug Delivery System (SMEDDS formulations of Raloxifene were prepared. The prepared formulations were characterized for drug loading, size, transparency, zeta potential, Transmission Electron Microscopy (TEM and in vitro intestinal permeability. Results : The results indicated that high drug loading, optimum size and desired zeta potential and transparency could be achieved with both SMEDDS and microemulsion. The TEM studies indicated the absence of aggregation with both the systems. The in vitro intestinal permeability results showed that the permeation of the drug from the microemulsion and SMEDDs was significantly higher than that obtained from the drug dispersion and marketed formulation. Conclusion : Lipid based formulations such as microemulsion and Self Microemulsifying drug delivery systems are expected to increase the oral bioavailability as evidenced by the increased intestinal permeation.

Formulation and characterization of lipid-based drug delivery system of raloxifene-microemulsion and self-microemulsifying drug delivery system

Science.gov (United States)

Thakkar, Hetal; Nangesh, Jitesh; Parmar, Mayur; Patel, Divyakant

2011-01-01

Background: Raloxifene, a second-generation selective estrogen receptor modulator (SERM) used to prevent osteoporosis in postmenopausal women is administered orally in the form of a tablet. The absolute bioavailability of the drug is only 2% because of extensive hepatic first-pass metabolism. Lipid-based formulations are reported to reduce the first-pass metabolism by promoting its lymphatic uptake. Materials and Methods: In the present investigation, microemulsion and Self-Microemulsifying Drug Delivery System (SMEDDS) formulations of Raloxifene were prepared. The prepared formulations were characterized for drug loading, size, transparency, zeta potential, Transmission Electron Microscopy (TEM) and in vitro intestinal permeability. Results: The results indicated that high drug loading, optimum size and desired zeta potential and transparency could be achieved with both SMEDDS and microemulsion. The TEM studies indicated the absence of aggregation with both the systems. The in vitro intestinal permeability results showed that the permeation of the drug from the microemulsion and SMEDDs was significantly higher than that obtained from the drug dispersion and marketed formulation. Conclusion: Lipid based formulations such as microemulsion and Self Microemulsifying drug delivery systems are expected to increase the oral bioavailability as evidenced by the increased intestinal permeation. PMID:21966167

An Overview On Various Approaches And Recent Patents On Gastroretentive Drug Delivery Systems.

Science.gov (United States)

Kumar, Manoj; Kaushik, Deepak

2018-03-08

Drugs having absorption window in the stomach or upper small intestine has restricted bioavailability with conventional dosage forms. The gastric residence time of these dosage forms is usually short and they do not show drug release for prolonged period of time. To avoid these problems and to enhance the bioavailability and gastric retention time of these drugs, controlled drug delivery systems with prolonged gastric retention time are currently being developed. This review highlights the various pharmaceutical approaches for gastroretention such as floating drug delivery systems, mucoadhesive systems, high density systems, expandable and swelling systems, superporous hydrogels systems, magnetic systems, ion exchange resin system and recent patents filed or granted for these approaches. Recently some patents are also reported where a combination of various approaches are being employed to achieve very effective gastroretention. The various patent search sites were used to collect and analyze the information on gastroretentive drug delivery systems. The present study provides valuable information, advantages, limitations and future outlook of various gastroretentive drug delivery systems. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Magnetic microspheres as magical novel drug delivery system: A review

Directory of Open Access Journals (Sweden)

Satinder Kakar

2013-01-01

Full Text Available Magnetic microspheres hold great promise for reaching the goal of controlled and site specific drug delivery. Magnetic microspheres as an alternative to traditional radiation methods which uses highly penetrating radiations that is absorbed throughout the body. Its use is limited by toxicity and side effects. Now days, several targeted treatment systems including magnetic field, electric field, ultrasound, temperature, UV light and mechanical force are being used in many disease treatments (e.g. cancer, nerve damage, heart and artery, anti-diabetic, eye and other medical treatments. Among them, the magnetic targeted drug delivery system is one of the most attractive and promising strategy for delivering the drug to the specified site. Magnetically controlled drug targeting is one of the various possible ways of drug targeting. This technology is based on binding establish anticancer drug with ferrofluid that concentrate the drug in the area of interest (tumor site by means of magnetic fields. There has been keen interest in the development of a magnetically target drug delivery system. These drug delivery systems aim to deliver the drug at a rate directed by the needs of the body during the period of treatment, and target the activity entity to the site of action. Magnetic microspheres were developed to overcome two major problems encountered in drug targeting namely: RES clearance and target site specificity.

Exposure reduction in general dental practice using digital x-ray imaging system for intraoral radiography with additional x-ray beam filter

International Nuclear Information System (INIS)

Shibuya, Hitoshi; Mori, Toshimichi; Hayakawa, Yoshihiko; Kuroyanagi, Kinya; Ota, Yoshiko

1997-01-01

To measure exposure reduction in general dental practice using digital x-ray imaging systems for intraoral radiography with additional x-ray beam filter. Two digital x-ray imaging systems, Pana Digital (Pana-Heraus Dental) and CDR (Schick Technologies), were applied for intraoral radiography in general dental practice. Due to the high sensitivity to x-rays, additional x-ray beam filters for output reduction were used for examination. An Orex W II (Osada Electric Industry) x-ray generator was operated at 60 kVp, 7 mA. X-ray output (air-kerma; Gy) necessary for obtaining clinically acceptable images was measured at 0 to 20 cm in 5 cm steps from the cone tip using an ionizing chamber type 660 (Nuclear Associates) and compared with those for Ektaspeed Plus film (Eastman Kodak). The Pana Digital system was used with the optional filter supplied by Pana-Heraus Dental which reduced the output to 38%. The exposure necessary to obtain clinically acceptable images was only 40% of that for the film. The CDR system was used with the Dental X-ray Beam Filter Kit (Eastman Kodak) which reduced the x-ray output to 30%. The exposure necessary to obtain clinically acceptable images was only 20% of that for the film. The two digital x-ray imaging systems, Pana Digital and CDR, provided large dose savings (60-80%) compared with Ektaspeed Plus film when applied for intraoral radiography in general dental practice. (author)

Formulation and Evaluation of Two-Pulse Drug Delivery System of ...

African Journals Online (AJOL)

Purpose: To develop a pH-controlled two-pulse drug delivery system of amoxicillin in order to overcome ... delivery have lately been applied in developing a .... Note: Each tablet contained 2 mg each of magnesium stearate and colloidal silicon dioxide; total weight of each ..... and Manufacture of Medicines, 3rd edn, Elsevier,.

SU-D-201-03: During-Treatment Delivery Monitoring System for TomoTherapy

Energy Technology Data Exchange (ETDEWEB)

Chen, Q; Read, P [University of Virginia, Charlottesville, VA (United States)

2016-06-15

Purpose: Multiple error pathways can lead to delivery errors during the treatment course that cannot be caught with pre-treatment QA. While in vivo solutions are being developed for linacs, no such solution exists for tomotherapy. The purpose of this study is to develop a near real-time system for tomotherapy that can monitor the delivery and dose accumulation process during the treatment-delivery, which enable the user to assess the impact of delivery variations and/or errors and to interrupt the treatment if necessary. Methods: A program running on a tomotherapy planning station fetches the raw DAS data during treatment. Exit detector data is extracted as well as output, gantry angle, and other machine parameters. For each sample, the MLC open-close state is determined. The delivered plan is compared with the original plan via a Monte Carlo dose engine which transports fluence deviations from a pre-treatment Monte Carlo run. A report containing the difference in fluence, dose and DVH statistics is created in html format. This process is repeated until the treatment is completed. Results: Since we only need to compute the dose for the difference in fluence for a few projections each time, dose with 2% statistical uncertainty can be computed in less than 1 second on a 4-core cpu. However, the current bottleneck in this near real-time system is the repeated fetching and processing the growing DAS data file throughout the delivery. The frame rate drops from 10Hz at the beginning of treatment to 5Hz after 3 minutes and to 2Hz after 10 minutes. Conclusion: A during-treatment delivery monitor system has been built to monitor tomotherapy treatments. The system improves patient safety by allowing operators to assess the delivery variations and errors during treatment delivery and adopt appropriate actions.

SU-D-201-03: During-Treatment Delivery Monitoring System for TomoTherapy

International Nuclear Information System (INIS)

Chen, Q; Read, P

2016-01-01

Purpose: Multiple error pathways can lead to delivery errors during the treatment course that cannot be caught with pre-treatment QA. While in vivo solutions are being developed for linacs, no such solution exists for tomotherapy. The purpose of this study is to develop a near real-time system for tomotherapy that can monitor the delivery and dose accumulation process during the treatment-delivery, which enable the user to assess the impact of delivery variations and/or errors and to interrupt the treatment if necessary. Methods: A program running on a tomotherapy planning station fetches the raw DAS data during treatment. Exit detector data is extracted as well as output, gantry angle, and other machine parameters. For each sample, the MLC open-close state is determined. The delivered plan is compared with the original plan via a Monte Carlo dose engine which transports fluence deviations from a pre-treatment Monte Carlo run. A report containing the difference in fluence, dose and DVH statistics is created in html format. This process is repeated until the treatment is completed. Results: Since we only need to compute the dose for the difference in fluence for a few projections each time, dose with 2% statistical uncertainty can be computed in less than 1 second on a 4-core cpu. However, the current bottleneck in this near real-time system is the repeated fetching and processing the growing DAS data file throughout the delivery. The frame rate drops from 10Hz at the beginning of treatment to 5Hz after 3 minutes and to 2Hz after 10 minutes. Conclusion: A during-treatment delivery monitor system has been built to monitor tomotherapy treatments. The system improves patient safety by allowing operators to assess the delivery variations and errors during treatment delivery and adopt appropriate actions.

Fabrication, Characterization, and Biological Activity of Avermectin Nano-delivery Systems with Different Particle Sizes

Science.gov (United States)

Wang, Anqi; Wang, Yan; Sun, Changjiao; Wang, Chunxin; Cui, Bo; Zhao, Xiang; Zeng, Zhanghua; Yao, Junwei; Yang, Dongsheng; Liu, Guoqiang; Cui, Haixin

2018-01-01

Nano-delivery systems for the active ingredients of pesticides can improve the utilization rates of pesticides and prolong their control effects. This is due to the nanocarrier envelope and controlled release function. However, particles containing active ingredients in controlled release pesticide formulations are generally large and have wide size distributions. There have been limited studies about the effect of particle size on the controlled release properties and biological activities of pesticide delivery systems. In the current study, avermectin (Av) nano-delivery systems were constructed with different particle sizes and their performances were evaluated. The Av release rate in the nano-delivery system could be effectively controlled by changing the particle size. The biological activity increased with decreasing particle size. These results suggest that Av nano-delivery systems can significantly improve the controllable release, photostability, and biological activity, which will improve efficiency and reduce pesticide residues.

Police and Community-partnered Delivery System to Address ...

International Development Research Centre (IDRC) Digital Library (Canada)

... Delivery System to Address Violence Against Women in the Punjab (India) ... Education, Scheduled Castes and Other Back Classes, and Land Rural Development. ... IWRA/IDRC webinar on climate change and adaptive water management.

Components of Maternal Healthcare Delivery System Contributing to ...

African Journals Online (AJOL)

Components of Maternal Healthcare Delivery System Contributing to Maternal Deaths ... transcripts were analyzed using a directed approach to content analysis. Excerpts were categorized according to three main components of the maternal ...

75 FR 33169 - Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation...

Science.gov (United States)

2010-06-11

.... FDA-2008-N-0163] (formerly Docket No. 2001N-0067) RIN 0910-AG21 Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation of Special Controls for Dental Amalgam... the Federal Register of August 4, 2009 (74 FR 38686) which classified dental amalgam as a class II...

Texosome-based drug delivery system for cancer therapy: from past to present

International Nuclear Information System (INIS)

Mahmoodzadeh Hosseini, Hamideh; Halabian, Raheleh; Amin, Mohsen; Imani Fooladi, Abbas Ali

2015-01-01

Rising worldwide cancer incidence and resistance to current anti-cancer drugs necessitate the need for new pharmaceutical compounds and drug delivery system. Malfunction of the immune system, particularly in the tumor microenvironment, causes tumor growth and enhances tumor progression. Thus, cancer immunotherapy can be an appropriate approach to provoke the systemic immune system to combat tumor expansion. Texosomes, which are endogenous nanovesicles released by all tumor cells, contribute to cell-cell communication and modify the phenotypic features of recipient cells due to the texosomes’ ability to transport biological components. For this reason, texosome-based delivery system can be a valuable strategy for therapeutic purposes. To improve the pharmaceutical behavior of this system and to facilitate its use in medical applications, biotechnology approaches and mimetic techniques have been utilized. In this review, we present the development history of texosome-based delivery systems and discuss the advantages and disadvantages of each system

In vitro characterization of microcontainers as an oral drug delivery system

DEFF Research Database (Denmark)

Nielsen, Line Hagner; Keller, Stephan Sylvest; Jacobsen, J.

We here present in vitro studies showing the promise of microcontainers (fabricated in either SU-8 or Poly(lactic acid) (PLLA)) as an oral drug delivery system for the poorly watersoluble drug, furosemide.......We here present in vitro studies showing the promise of microcontainers (fabricated in either SU-8 or Poly(lactic acid) (PLLA)) as an oral drug delivery system for the poorly watersoluble drug, furosemide....

Dental calculus detection using the VistaCam.

Science.gov (United States)

Shakibaie, Fardad; Walsh, Laurence J

2016-12-01

The VistaCam® intra-oral camera system (Dürr Dental, Bietigheim-Bissingen, Germany) is a fluorescence system using light emitting diodes that produce a 405-nm violet light. This wavelength has potential application for detection of dental calculus based on red emissions from porphyrin molecules. This study assessed the digital scores obtained for both supragingival and subgingival calculus on 60 extracted teeth and compared these with lesions of dental caries. It has also examined the effect of saliva and blood on the fluorescence readings for dental calculus. VistaCam fluorescence scores for both supragingival (1.7-3.3) and subgingival calculus (1.3-2.4) were higher than those for sound root surfaces (0.9-1.1) and dental caries (0.9-2.2) ( p  calculus samples were not affected by the presence of saliva or blood. These results suggest that the use of violet light fluorescence could be a possible adjunct to clinical examination for deposits of dental calculus.

Towards an Innovative Web-Based Lab Delivery System for a Management Information Systems Course

Science.gov (United States)

Breimer, Eric; Cotler, Jami; Yoder, Robert

2011-01-01

While online systems are an essential component of distance learning, they can also play a critical role in improving the delivery of activities in a traditional laboratory setting. The quality and effectiveness of online course delivery is often compared to equivalent face-to-face alternatives. In our approach, we have harnessed what we feel to…

Chitosan magnetic nanoparticles for drug delivery systems.

Science.gov (United States)

Assa, Farnaz; Jafarizadeh-Malmiri, Hoda; Ajamein, Hossein; Vaghari, Hamideh; Anarjan, Navideh; Ahmadi, Omid; Berenjian, Aydin

2017-06-01

The potential of magnetic nanoparticles (MNPs) in drug delivery systems (DDSs) is mainly related to its magnetic core and surface coating. These coatings can eliminate or minimize their aggregation under physiological conditions. Also, they can provide functional groups for bioconjugation to anticancer drugs and/or targeted ligands. Chitosan, as a derivative of chitin, is an attractive natural biopolymer from renewable resources with the presence of reactive amino and hydroxyl functional groups in its structure. Chitosan nanoparticles (NPs), due to their huge surface to volume ratio as compared to the chitosan in its bulk form, have outstanding physico-chemical, antimicrobial and biological properties. These unique properties make chitosan NPs a promising biopolymer for the application of DDSs. In this review, the current state and challenges for the application magnetic chitosan NPs in drug delivery systems were investigated. The present review also revisits the limitations and commercial impediments to provide insight for future works.

Delivery systems for biopharmaceuticals. Part II: Liposomes, Micelles, Microemulsions and Dendrimers.

Science.gov (United States)

Silva, Ana C; Lopes, Carla M; Lobo, José M S; Amaral, Maria H

2015-01-01

Biopharmaceuticals are a generation of drugs that include peptides, proteins, nucleic acids and cell products. According to their particular molecular characteristics (e.g. high molecular size, susceptibility to enzymatic activity), these products present some limitations for administration and usually parenteral routes are the only option. To avoid these limitations, different colloidal carriers (e.g. liposomes, micelles, microemulsions and dendrimers) have been proposed to improve biopharmaceuticals delivery. Liposomes are promising drug delivery systems, despite some limitations have been reported (e.g. in vivo failure, poor long-term stability and low transfection efficiency), and only a limited number of formulations have reached the market. Micelles and microemulsions require more studies to exclude some of the observed drawbacks and guarantee their potential for use in clinic. According to their peculiar structures, dendrimers have been showing good results for nucleic acids delivery and a great development of these systems during next years is expected. This is the Part II of two review articles, which provides the state of the art of biopharmaceuticals delivery systems. Part II deals with liposomes, micelles, microemulsions and dendrimers.

Role of pressure-sensitive adhesives in transdermal drug delivery systems.

Science.gov (United States)

Lobo, Shabbir; Sachdeva, Sameer; Goswami, Tarun

2016-01-01

Transdermal drug delivery systems (TDDS) are employed for the delivery of drugs across skin into the systemic circulation. Pressure-sensitive adhesive (PSA) is one of the most critical components used in a TDDS. The primary function of PSA is to help in adhesion of patch to skin, but more importantly it acts as a matrix for the drug and other excipients. Hence, apart from adhesion of the patch, PSA also affects other critical quality attributes of the TDDS such as drug delivery, flux through skin and physical and chemical stability of the finished product. This review article provides a summary of the adhesives used in various types of TDDS. In particular, this review will cover the design types of TDDS, categories of PSAs and their evaluation and regulatory aspects.

Novel engineered systems for oral, mucosal and transdermal drug delivery.

Science.gov (United States)

Li, Hairui; Yu, Yuan; Faraji Dana, Sara; Li, Bo; Lee, Chi-Ying; Kang, Lifeng

2013-08-01

Technological advances in drug discovery have resulted in increasing number of molecules including proteins and peptides as drug candidates. However, how to deliver drugs with satisfactory therapeutic effect, minimal side effects and increased patient compliance is a question posted before researchers, especially for those drugs with poor solubility, large molecular weight or instability. Microfabrication technology, polymer science and bioconjugate chemistry combine to address these problems and generate a number of novel engineered drug delivery systems. Injection routes usually have poor patient compliance due to their invasive nature and potential safety concerns over needle reuse. The alternative non-invasive routes, such as oral, mucosal (pulmonary, nasal, ocular, buccal, rectal, vaginal), and transdermal drug delivery have thus attracted many attentions. Here, we review the applications of the novel engineered systems for oral, mucosal and transdermal drug delivery.

The Ukrainian Dental Market: Characteristics of Demand for Services in the Segment of Dental Implantation

Directory of Open Access Journals (Sweden)

Slipchenko Tetiana O.

2017-05-01

Full Text Available The article is aimed at analyzing the market for dental services in Ukraine in the implantology segment, studying the demand factors for these services and developing a system of measures to manage the demand for dental implantation services. It has been proven that the market for dental services according to a complex of its attributes is more in line with the type of market of monopolistic competition. One of the promising ways of developing the dental market is to transform producers of dental services into the vertically integrated holdings. As one of the specific features of the dental services market is allocated the asymmetry of information, which leads to a conflict between the medical and economic interests of dentists. The price and non-price factors of demand for dental implantation services were determined, the prime cost structure of a dental service was analyzed. The characteristic attributes of a medical service have been defined as consistently defined actions or a complex of actions by medical personnel aimed at prevention, diagnosis, treatment, and rehabilitation, which have a self-contained complete meaning and a certain price.

Using DNA nanotechnology to produce a drug delivery system

Science.gov (United States)

Huyen La, Thi; Thu Thuy Nguyen, Thi; Phuc Pham, Van; Huyen Nguyen, Thi Minh; Huan Le, Quang

2013-03-01

Drug delivery to cancer cells in chemotherapy is one of the most advanced research topics. The effectiveness of the current cancer treatment drugs is limited because they are not capable of distinguishing between cancer cells and normal cells so that they kill not only cancer cells but also normal ones. To overcome this disadvantage by profiting from the differences in physical and chemical properties between cancer and normal cells, nanoparticles (NPs) delivering a drug are designed in a specific manner such that they can distinguish the cancer cells from the normal ones and are targeted only to the cancer cells. Currently, there are various drug delivery systems with many advantages, but sharing some common disadvantages such as difficulty with controlling the size, low encapsulation capacity and low stability. With the development and success of DNA nanotechnology, DNA strands are used to create effective drug delivery NPs with precisely controlled size and structure, safety and high stability. This article presents our study on drug encapsulation in DNA nanostructure which loaded docetaxel and curcumin in a desire to create a new and effective drug delivery system with high biological compatibility. Invited talk at the 6th International Workshop on Advanced Materials Science and Nanotechnology, 30 October-2 November, 2012, Ha Long, Vietnam.

An emerging platform for drug delivery: aerogel based systems.

Science.gov (United States)

Ulker, Zeynep; Erkey, Can

2014-03-10

Over the past few decades, advances in "aerogel science" have provoked an increasing interest for these materials in pharmaceutical sciences for drug delivery applications. Because of their high surface areas, high porosities and open pore structures which can be tuned and controlled by manipulation of synthesis conditions, nanostructured aerogels represent a promising class of materials for delivery of various drugs as well as enzymes and proteins. Along with biocompatible inorganic aerogels and biodegradable organic aerogels, more complex systems such as surface functionalized aerogels, composite aerogels and layered aerogels have also been under development and possess huge potential. Emphasis is given to the details of the aerogel synthesis and drug loading methods as well as the influence of synthesis parameters and loading methods on the adsorption and release of the drugs. Owing to their ability to increase the bioavailability of low solubility drugs, to improve both their stability and their release kinetics, there are an increasing number of research articles concerning aerogels in different drug delivery applications. This review presents an up to date overview of the advances in all kinds of aerogel based drug delivery systems which are currently under investigation. Copyright © 2014 Elsevier B.V. All rights reserved.

[Single- and multi-unit fixed dental prostheses in relation to the occlusal system].

Science.gov (United States)

Witter, D J; Gerritsen, A E; van Spijker, A; Creugers, N H J

2013-02-01

Occlusion concepts based on functional aspects offer more solid ground in the diagnostic process and in the treatment of (reduced) dentitions than morphologically and mechanically oriented occlusion concepts. Nevertheless, for occlusal reconstruction morphologically oriented guidelines are necessary. These guidelines are based on the border movements and positions of the mandible in the orofacial system, and on the location and modelling of the occlusal contacts in the occlusal system. The modelling of single- and multi-unit fixed dental prostheses must harmonize with the occlusal system. Moreover, an important feature is the relation of the anterior teeth which enables mutually protected occlusion. Characteristics of a healthy orofacial and occlusal system are: absence of pathology, perceived sufficient oral functions, variability inform and function, and adaptive capacity. When designing single- or multiunit fixed dental prostheses, a pragmatic starting point is to maintain the existing occlusion and the existing speech pattern unless arguments can be provided for alterations. The occlusal design should aim at optimizing oral functions, such as mandibular and occlusal stability.

Dental Amalgam

Science.gov (United States)

... Products and Medical Procedures Dental Devices Dental Amalgam Dental Amalgam Share Tweet Linkedin Pin it More sharing options Linkedin Pin it Email Print Dental amalgam is a dental filling material which is ...

Diabetes induces metabolic alterations in dental pulp.

Science.gov (United States)

Leite, Mariana Ferreira; Ganzerla, Emily; Marques, Márcia Martins; Nicolau, José

2008-10-01

Diabetes can interfere in tissue nutrition and can impair dental pulp metabolism. This disease causes oxidative stress in cells and tissues. However, little is known about the antioxidant system in the dental pulp of diabetics. Thus, it would be of importance to study this system in this tissue in order to verify possible alterations indicative of oxidative stress. The aim of this study was to evaluate some parameters of antioxidant system of the dental pulp of healthy (n = 8) and diabetic rats (n = 8). Diabetes was induced by streptozotocin in rats. Six weeks after diabetes induction, a pool of the dental pulp of the 4 incisors of each rat (healthy and diabetic) was used for the determination of total protein and sialic acid concentrations and catalase and peroxidase activities. Data were compared by a Student t test (p pulps from both groups presented similar total protein concentrations and peroxidase activity. Dental pulps of diabetic rats exhibited significantly lower free, conjugated, and total sialic acid concentrations than those of control tissues. Catalase activity in diabetic dental pulps was significantly enhanced in comparison with that of control pulps. The result of the present study is indicative of oxidative stress in the dental pulp caused by diabetes. The increase of catalase activity and the reduction of sialic acid could be resultant of reactive oxygen species production.

A system for EPID-based real-time treatment delivery verification during dynamic IMRT treatment.

Science.gov (United States)

Fuangrod, Todsaporn; Woodruff, Henry C; van Uytven, Eric; McCurdy, Boyd M C; Kuncic, Zdenka; O'Connor, Daryl J; Greer, Peter B

2013-09-01

To design and develop a real-time electronic portal imaging device (EPID)-based delivery verification system for dynamic intensity modulated radiation therapy (IMRT) which enables detection of gross treatment delivery errors before delivery of substantial radiation to the patient. The system utilizes a comprehensive physics-based model to generate a series of predicted transit EPID image frames as a reference dataset and compares these to measured EPID frames acquired during treatment. The two datasets are using MLC aperture comparison and cumulative signal checking techniques. The system operation in real-time was simulated offline using previously acquired images for 19 IMRT patient deliveries with both frame-by-frame comparison and cumulative frame comparison. Simulated error case studies were used to demonstrate the system sensitivity and performance. The accuracy of the synchronization method was shown to agree within two control points which corresponds to approximately ∼1% of the total MU to be delivered for dynamic IMRT. The system achieved mean real-time gamma results for frame-by-frame analysis of 86.6% and 89.0% for 3%, 3 mm and 4%, 4 mm criteria, respectively, and 97.9% and 98.6% for cumulative gamma analysis. The system can detect a 10% MU error using 3%, 3 mm criteria within approximately 10 s. The EPID-based real-time delivery verification system successfully detected simulated gross errors introduced into patient plan deliveries in near real-time (within 0.1 s). A real-time radiation delivery verification system for dynamic IMRT has been demonstrated that is designed to prevent major mistreatments in modern radiation therapy.

CMOS Flat-Panel CBCT for Dental Imaging

International Nuclear Information System (INIS)

Youn, Han Bean; Cho, Min Kook; Kim, Jee Young; Lee, Hyun Ji; Cho, Bong Hye; Heo, Sung Kyn

2009-01-01

Computed tomography (CT) has become one of the most frequently used imaging modalities for the preoperative evaluation of the jaw for dental implants. Sometimes dental Implant surgery needs histologic information of the regeneration of bone structure However conventional dental CT cannot serve these information because of its resolution limit. Hence we suggest dental CT which has micro scale resolution with high magnification factor. In these regards, We investigated micro dental CT with optimal magnification factor about our hardware system and evaluated along the 2D and 3D performance experimentally

Flexible power delivery system and its intelligent functions

International Nuclear Information System (INIS)

Glamochanin, Vlastimir; Andonov, Dragan

1996-01-01

This paper presents some of the features and capabilities of the novel energy distribution system called FRIENDS. The main FRIENDS objective is distribution system reliability, with flexible system structure reconfiguration, inclusion of dispersed energy generation systems. Altogether, it represents a new concept of reliable and economic electric power delivery to end users. The FRIENDS project is a challenge for future research and development, including new technology and devices for the implementation of such an integrated system. (author)

[Recent technical advances in portable oxygen delivery systems].

Science.gov (United States)

Machida, K; Kawabe, Y; Mori, M; Haga, T

1992-08-01

According to a Japanese national survey (June 30, 1990), the number of patients receiving home oxygen therapy (HOT) has been greater than 18,000 since March 1985, when HOT was first covered by health insurance. The oxygen concentrator, especially the molecular sieve type, is the most common method of delivery (more than 90%). In April 1988, the portable oxygen cylinder was acknowledged by health insurance, and the liquid oxygen supply system in April 1990. Three types of portable oxygen delivery systems are available; oxygen cyclinder, liquid oxygen system, and oxygen concentrator (membrane type), of which the oxygen cylinder is most commonly used. In our hospital, portable oxygen supply systems were used in 80% of 168 HOT cases in 1990, and the use of 400 L aluminum oxygen cylinders at a flow rate of 1-2 L/min has been most popular. There is an strong desire from patients for lighter portable oxygen supply system of longer duration. In 19 patients with chronic respiratory failure, we evaluated a newly designed demand oxygen delivery system (DODS), which weighs 2.4 kg including the DOD device (TER-20 Teijin), 1.1 L oxygen cylinder made of ultressor, nasal cannula, and carrier. Arterial blood gases at rest (room air) were PaO2 61.9 +/- 6.3 torr, PaCO2 63.8 +/- 9.4 torr and pH 7.40 +/- 0.04. A crossover trial was performed under three conditions; breathing room air with no weight, and pulse oxygen flow and continuous oxygen flow each carrying 2.4 kg of weight. Both 6 minute walking (E1) and walking on a slow speed treadmill (E2) were studied.(ABSTRACT TRUNCATED AT 250 WORDS)

Towards a specific approach to education in dental ethics: a proposal for organising the topics of biomedical ethics for dental education.

Science.gov (United States)

Gorkey, Sefik; Guven, Tolga; Sert, Gurkan

2012-01-01

Understanding dental ethics as a field separate from its much better known counterpart, medical ethics, is a relatively new, but necessary approach in bioethics. This need is particularly felt in dental education and establishing a curriculum specifically for dental ethics is a challenging task. Although certain topics such as informed consent and patient rights can be considered to be of equal importance in both fields, a number of ethical issues in dental practice are only remotely-if at all-relevant for medical practice. Therefore, any sound approach to education in dental ethics has to recognise the unique aspects of dental practice in order to meet the needs of dental students and prepare them for the ethical challenges they may face during their professional practice. With this goal in mind, this paper examines the approach of the authors to dental ethics education and proposes a system to organise the topics of biomedical ethics for dental education. While the authors' perspective is based on their experience in Turkey, the proposed system of classification is not a rigid one; it is open to interpretation in other contexts with different social, cultural and professional expectations. Therefore, the paper also aims to inspire discussion on the development of an ideal dental ethics curriculum at an international level.

Weaker dental enamel explains dental decay.

Science.gov (United States)

Vieira, Alexandre R; Gibson, Carolyn W; Deeley, Kathleen; Xue, Hui; Li, Yong

2015-01-01

Dental caries continues to be the most prevalent bacteria-mediated non-contagious disease of humankind. Dental professionals assert the disease can be explained by poor oral hygiene and a diet rich in sugars but this does not account for caries free individuals exposed to the same risk factors. In order to test the hypothesis that amount of amelogenin during enamel development can influence caries susceptibility, we generated multiple strains of mice with varying levels of available amelogenin during dental development. Mechanical tests showed that dental enamel developed with less amelogenin is "weaker" while the dental enamel of animals over-expressing amelogenin appears to be more resistant to acid dissolution.

Inulin based glutathione-responsive delivery system for colon cancer treatment.

Science.gov (United States)

Wang, Dongdong; Sun, Feifei; Lu, Chunbo; Chen, Peng; Wang, Zhaojie; Qiu, Yuanhao; Mu, Haibo; Miao, Zehong; Duan, Jinyou

2018-05-01

Colorectal cancer is one of the most common types of tumor in the world. Here we developed a lipoic acid esterified polysaccharide (inulin) delivery system for tanshinone IIA to treat colorectal cancer in vitro. The release of tanshinone IIA in the system was highly responsive to glutathione, which is commonly abundant in cancer cells. In addition, this drug delivery system was proliferative to Bifidobacterium longum, the common inhabitant of human intestine. Thus, this strategy might be useful to improve colon cancer therapy efficacy of anticancer drugs and meanwhile promote the growth of beneficial commensal flora in the gut. Copyright © 2018 Elsevier B.V. All rights reserved.

Developing an assessment in dental public health for clinical undergraduates attending a primary dental care outreach programme.

Science.gov (United States)

Holmes, R D; Waterhouse, P J; Maguire, A; Hind, V; Lloyd, J; Tabari, D; Lowry, R J

2011-02-01

This paper describes the development and implementation of a Dental Public Health (DPH) assessment within the Primary Dental Care Outreach (PDCO) course at Newcastle University. The assessment was piloted alongside the delivery of the Bachelor of Dental Surgery (BDS) curriculum in accordance with established learning outcomes. To design and implement a pilot summative assessment, incorporating patients' social histories obtained by undergraduate students attending primary dental care outreach clinics. Undergraduates were tasked with obtaining a detailed social history from a patient seen during their two-year outreach attachment. Each student submitted a written account of their patient's social history and placed this in context by researching a number of demographic and social variables centred upon their patient's home residence. The final component involved writing a concise case feature for a nominated newspaper based upon the case history, where students were encouraged to identify one or more public health messages using language appropriate to a lay readership. Seventy one clinical undergraduates (98.6% of the year-group) subsequently submitted all components of the assessment. Eighty six per cent of the year-group was deemed to have passed the assessment with 9.9% achieving a 'Merit' grade and 76% a 'Satisfactory' grade. Following the assessment, students and clinical teachers were asked for their feedback through a focus group for staff, and a brief feedback form for students. Undergraduates subsequently reported greater awareness of the significance and importance of obtaining a detailed social history and its relevance when devising appropriate and realistic treatment plans. © 2011 John Wiley & Sons A/S.

Nursing Services Delivery Theory: an open system approach.

Science.gov (United States)

Meyer, Raquel M; O'Brien-Pallas, Linda L

2010-12-01

This paper is a discussion of the derivation of the Nursing Services Delivery Theory from the application of open system theory to large-scale organizations. The underlying mechanisms by which staffing indicators influence outcomes remain under-theorized and unmeasured, resulting in a 'black box' that masks the nature and organization of nursing work. Theory linking nursing work, staffing, work environments, and outcomes in different settings is urgently needed to inform management decisions about the allocation of nurse staffing resources in organizations. A search of CINAHL and Business Source Premier for the years 1980-2008 was conducted using the following terms: theory, models, organization, organizational structure, management, administration, nursing units, and nursing. Seminal works were included. The healthcare organization is conceptualized as an open system characterized by energy transformation, a dynamic steady state, negative entropy, event cycles, negative feedback, differentiation, integration and coordination, and equifinality. The Nursing Services Delivery Theory proposes that input, throughput, and output factors interact dynamically to influence the global work demands placed on nursing work groups at the point of care in production subsystems. THE Nursing Services Delivery Theory can be applied to varied settings, cultures, and countries and supports the study of multi-level phenomena and cross-level effects. The Nursing Services Delivery Theory gives a relational structure for reconciling disparate streams of research related to nursing work, staffing, and work environments. The theory can guide future research and the management of nursing services in large-scale healthcare organizations. © 2010 Blackwell Publishing Ltd.

Synthesis and characterization of modified starch/polybutadiene as novel transdermal drug delivery system.

Science.gov (United States)

Saboktakin, Mohammad Reza; Akhyari, Shahab; Nasirov, Fizuli A

2014-08-01

Transdermal drug delivery systems are topically administered medicaments in the form of patches that deliver drugs for systemic effects at a predetermined and controlled rate. It works very simply in which drug is applied inside the patch and it is worn on skin for long period of time. Polymer matrix, drug, permeation enhancers are the main components of transdermal drug delivery systems. The objective of the present study was to develop the modified starch and 1,4-cis polybutadiene nanoparticles as novel polymer matrix system. We have been studied the properties of a novel transdermal drug delivery system with clonidine as drug model. Copyright © 2014 Elsevier B.V. All rights reserved.

Non-operative anti-caries agents and dental caries increment among adults at high caries risk: a retrospective cohort study.

Science.gov (United States)

Chaffee, Benjamin W; Cheng, Jing; Featherstone, John D B

2015-09-24

Consensus guidelines support non-operative preventives for dental caries management; yet, their use in practice is far from universal. The purpose of this study was to evaluate the effectiveness of non-operative anti-caries agents in caries prevention among high caries risk adults at a university clinic where risk-based caries management is emphasized. This retrospective observational study drew data from the electronic patient records of non-edentulous adult patients deemed to be at high risk for dental caries during baseline oral evaluations that were completed between July 1, 2007 and December 31, 2012 at a dental university in the United States. We calculated and compared adjusted mean estimates for the number of new decayed or restored teeth (DFT increment) from baseline to the next completed oral evaluation (N = 2,724 patients with follow-up) across three categories of delivery of non-operative anti-caries agents (e.g., high-concentration fluoride toothpaste, chlorhexidine rinse, xylitol products): never, at a single appointment, or at ≥2 appointments ≥4 weeks apart. Estimates were adjusted for patient and provider characteristics, baseline dental status, losses-to-follow-up, and follow-up time. Approximately half the patients did not receive any form of non-operative anti-caries agent. Most that received anti-caries agents were given more than one type of product in combination. One-time delivery of anti-caries agents was associated with a similar DFT increment as receiving no such therapy (difference in increment: -0.04; 95% CI: -0.28, 0.21). However, repeated, spaced delivery of anti-caries agents was associated with approximately one decayed or restored tooth prevented over 18 months for every three patients treated (difference in increment: -0.35; 95% CI: -0.65, -0.08). These results lend evidence that repeatedly receiving anti-caries agents can reduce tooth decay among high-risk patients engaged in regular dental care.

A clinician-driven home care delivery system.

Science.gov (United States)

August, D A; Faubion, W C; Ryan, M L; Haggerty, R H; Wesley, J R

1993-12-01

The financial, entrepreneurial, administrative, and legal forces acting within the home care arena make it difficult for clinicians to develop and operate home care initiatives within an academic setting. HomeMed is a clinician-initiated and -directed home care delivery system wholly owned by the University of Michigan. The advantages of a clinician-directed system include: Assurance that clinical and patient-based factors are the primary determinants of strategic and procedural decisions; Responsiveness of the system to clinician needs; Maintenance of an important role for the referring physician in home care; Economical clinical research by facilitation of protocol therapy in ambulatory and home settings; Reduction of lengths of hospital stays through clinician initiatives; Incorporation of outcome analysis and other research programs into the mission of the system; Clinician commitment to success of the system; and Clinician input on revenue use. Potential disadvantages of a clinician-based system include: Entrepreneurial, financial, and legal naivete; Disconnection from institutional administrative and data management resources; and Inadequate clinician interest and commitment. The University of Michigan HomeMed experience demonstrates a model of clinician-initiated and -directed home care delivery that has been innovative, profitable, and clinically excellent, has engendered broad physician, nurse, pharmacist, and social worker enthusiasm, and has supported individual investigator clinical protocols as well as broad outcomes research initiatives. It is concluded that a clinician-initiated and -directed home care program is feasible and effective, and in some settings may be optimal.

PLGA nanoparticles as chlorhexidine-delivery carrier to resin-dentin adhesive interface.

Science.gov (United States)

Priyadarshini, Balasankar Meera; Mitali, Kakran; Lu, Thong Beng; Handral, Harish K; Dubey, Nileshkumar; Fawzy, Amr S

2017-07-01

To characterize and deliver fabricated CHX-loaded PLGA-nanoparticles inside micron-sized dentinal-tubules of demineralized dentin-substrates and resin-dentin interface. Nanoparticles fabricated by emulsion evaporation were assessed in-vitro by different techniques. Delivery of drug-loaded nanoparticles to demineralized dentin substrates, interaction with collagen matrix, and ex-vivo CHX-release profiles using extracted teeth connected to experimental setup simulating pulpal hydrostatic pressure were investigated. Furthermore, nanoparticles association/interaction with a commercial dentin-adhesive applied to demineralized dentin substrates were examined. The results showed that the formulated nanoparticles demonstrated attractive physicochemical properties, low cytotoxicity, potent antibacterial efficacy, and slow degradation and gradual CHX release profiles. Nanoparticles delivered efficiently inside dentinal-tubules structure to sufficient depth (>10μm) against the simulated upward pulpal hydrostatic-pressure, even after bonding-resins infiltration and were attached/retained on collagen-fibrils. These results verified the potential significance of this newly introduced drug-delivery therapeutic strategy for future clinical applications and promote for a new era of future dental research. This innovative drug-delivery strategy has proven to be a reliable method for delivering treatments that could be elaborated for other clinical applications in adhesive and restorative dentistry. Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Novel electric power-driven hydrodynamic injection system for gene delivery: safety and efficacy of human factor IX delivery in rats.

Science.gov (United States)

Yokoo, T; Kamimura, K; Suda, T; Kanefuji, T; Oda, M; Zhang, G; Liu, D; Aoyagi, Y

2013-08-01

The development of a safe and reproducible gene delivery system is an essential step toward the clinical application of the hydrodynamic gene delivery (HGD) method. For this purpose, we have developed a novel electric power-driven injection system called the HydroJector-EM, which can replicate various time-pressure curves preloaded into the computer program before injection. The assessment of the reproducibility and safety of gene delivery system in vitro and in vivo demonstrated the precise replication of intravascular time-pressure curves and the reproducibility of gene delivery efficiency. The highest level of luciferase expression (272 pg luciferase per mg of proteins) was achieved safely using the time-pressure curve, which reaches 30 mm Hg in 10 s among various curves tested. Using this curve, the sustained expression of a therapeutic level of human factor IX protein (>500 ng ml(-1)) was maintained for 2 months after the HGD of the pBS-HCRHP-FIXIA plasmid. Other than a transient increase in liver enzymes that recovered in a few days, no adverse events were seen in rats. These results confirm the effectiveness of the HydroJector-EM for reproducible gene delivery and demonstrate that long-term therapeutic gene expression can be achieved by automatic computer-controlled hydrodynamic injection that can be performed by anyone.