Oral cavity evaluation and dental chart registration of coati (Nasua nasua) in captivity

OpenAIRE

Freitas, Elisângela P; Rahal, Sheila Canevese; Teixeira, Carlos Roberto; Teixeira, Rodrigo Hidalgo Friciello; Mendes, Guilherme Martines Teixeira; Gioso, Marco Antonio

2008-01-01

The aims of this study were to develop a dental chart, evaluate any oral cavity disease, develop gypsum models of the dental arches, and to register the occlusions found in coatis (Nasua nasua) in captivity. Formulation of the dental chart was assisted by intraoral radiographs from the head of an adult coati cadaver of the same species with the following dental formula: I 3/3, C 1/1, P 4/3, M 2/2. Seven live coatis of the Nasua nasua species were evaluated. Five of the seven coatis presented ...

Preparation and handling of superconducting RF cavities

International Nuclear Information System (INIS)

Furuya, Takaaki

1990-01-01

The present paper outlines the recent preparation methods for superconducting cavities used in various laboratories and universities, and reports the problems of the cavity fabrication at KEK as an example of mass production. Preparation and handling are first addressed, focusing on material, fabrication, surface treatment, rinsing, clean environment, and heat treatment. Cavity production at KEK is then described, centering on defects on the surface and clean environments. Field gradients of more than 20 MV/m have been obtained by 1.5-3 GHz single cavities, for multi-cell cavities Eacc of 10 MV/m are available at any frequency range. The successful construction of thirty-two cavities for TRISTAN at KEK is due to the careful checking of the surface and quality control of all processes against the surface defects and contaminations. Eacc of 5 MV/m has been achieved by 94 % of the TRISTAN cavities at the first cold test, but 6 % of them had to be reworked because of the surface defects. These defects could not be detected by an X-ray photograph or visual inspections during the fabrication processes. (N.K.)

Effect of type of cavity preparation (bur,Er:YAG laser and restorative materials on prevention of caries lesion

Directory of Open Access Journals (Sweden)

Masumeh Hasani Tabatabaei

2017-03-01

Full Text Available Background and Aims: Despite the reduction of incidence of dental caries in recent years, this disease is common and many efforts were conducted to decrease the prevalence of dental caries. On the other hand secondary caries lesions are the main reason for replacement of direct restorations. Therefore, the aim of the current study was to evaluate suitable methods of preparation and restorative materials to reduce caries recurrence. Materials and Methods: In this experimental study, eighty human teeth were collected and stored in normal saline. The teeth were soft-tissue debrided and cleaned with water/pumice slurry and rubber cups in a low-speed handpiece. Speciments were randomly divided in two main groups. Cavities were prepared with diamond burs or Er:YAG laser (10 Hz, 300 mJ, 3W. Each group was divided into 4 sub-groups, and restored with a glass-ionomer cement (Fuji IX, resin modified glass-ionomer (Fuji II LC, total etch bonding + composite resin or self-etch bonding + composite resin. The specimens were submitted to pH cycling. Speciments were then sectioned, polished and Vickers microhardness measurements were performed on each specimen. Differences among the medians were analyzed using two way ANOVA test at a 95% confidence level and Tukey test. Results: Statistical analysis showed significant difference in the type of substrate (enamel, dentin in both main groups (P<0.0001 but no differences in the caries lesion development between the cavities restored with the same material and prepared with diamond burs or Er:YAG laser. Conclusion: The Er:YAG laser used for cavity preparation and different types of restorative materials used did not show the ability to guarantee significantly more acid-resistance tooth structure against demineralization.

Comparison of paracetamol, ibuprofen, and diclofenac potassium for pain relief following dental extractions and deep cavity preparations

Directory of Open Access Journals (Sweden)

Giath Gazal

2017-03-01

Full Text Available Objectives: To compare the effectiveness of different oral analgesics for relieving pain and distress in adults following the extraction of teeth and deep cavity preparations under local anesthesia. Methods: This randomized controlled study was conducted between November 2015 and May 2016. One hundred and twenty patients were randomly allocated to 3 groups. Forty patients were in the paracetamol (1 gram group, 40 in the ibuprofen (400 mg group and 40 in the diclofenac potassium (50 mg group. Evaluation of the post extraction and deep cavity preparations pain was made by patients immediately postoperatively, 2, 4 and 6 hours postoperatively on standard 100 mm visual analogue scales (VAS. Furthermore, each patient was observed preoperatively and immediately postoperatively for signs of distress by using a 5 point face scale. Results: There were significant decreases in mean pain VAS scores for diclofenac potassium group compared to paracetamol and ibuprofen groups at 4 hours postoperatively (one-way Analysis of Variance: p=0.0001, p=0.001 and 6 hours postoperatively (p=0.04, p=0.005. Changes in distress scores from the preoperative score to the postoperative score were made using the paired sample t-test. There were significant decreases in distress scores between the preoperative and postoperative scores (p=0.0001. Conclusions: Diclofenac potassium was more effective than paracetamol or ibuprofen for reducing postoperative pain associated with tooth extraction and deep cavity preparation. Patients’ distress levels can be alleviated by using preemptive analgesics.

A comparative evaluation of microleakage of restorations using silorane-based dental composite and methacrylate-based dental composites in Class II cavities: An in vitro study

Directory of Open Access Journals (Sweden)

Jambai Sampath Kumar Sivakumar

2016-01-01

Full Text Available Aim: The aim of this in vitro study was to evaluate and compare the microleakage of restorations using low shrinkage silorane-based dental composite and methacrylate-based dental composites in Class II cavity at the occlusal and gingival margins. Materials and Methods: Sixty mandibular molars were collected and divided into three experimental groups and one negative control group. Class II slot cavity was prepared on the mesial surface. Experimental groups were restored with Group I: silorane-based microhybrid composite, Group II: methacrylate-based nanohybrid composite, and Group III: Methacrylate-based microhybrid composite, respectively. Group IV: negative control. The samples were thermocycled, root apices were sealed with sticky wax and coated with nail varnish except 1 mm around the restoration. This was followed by immersion in 2% Rhodamine-B dye solution under vacuum at room temperature for 24 h. Then, the samples were sectioned longitudinally in the mesiodistal direction and evaluated under stereomicroscope ×40 magnification. Scoring was done according to the depth of dye penetration in to the cavity. Statistical analysis of the data was done. Results: The results were that no statistically significant difference in the microleakage at the occlusal margin for all the restorative materials, whereas at the gingival margin, silorane-based microhybrid composite showed less microleakage than the methacrylate-based nano- and micro-hybrid composites. Conclusion: In general, silorane-based microhybrid composite had less microleakage among the other materials used in this in vitro study.

Evaluation of effect of 3D video glasses on perceived pain and unpleasantness induced by restorative dental treatment

DEFF Research Database (Denmark)

Bentsen, Bo; Svensson, Peter; Wenzel, Ann

2001-01-01

whether distraction induced by video glasses also had an effect on the perceived intensity of pain and unpleasantness during dental treatment. Pain and unpleasantness was evoked by the preparation (drilling) of a minor dental cavity (class I). Twenty-three patients (17 female and six male, age range 20......-49 years) with a need for an occlusal dental restoration in two homologous teeth participated in the study, In this split-mouth design, the patient received the dental treatment wearing 3D video glasses and without video glasses (control situation) in a randomized order. The tooth cavities were prepared...... in accordance with conventional techniques after mounting the video glasses. The patient rated the intensity of pain and unpleasantness on 100 mm visual analogue scales (VASs) after preparation of the first cavity; immediately after, the opposite tooth was prepared and again the volunteer rated the intensity...

Performance of TESLA Cavities After Fabrication and Preparation in Industry

CERN Document Server

Pekeler, Michael; Bauer, Stefan; Knobloch, Jens; Vom Stein, Peter

2005-01-01

In order to demonstrate cw operation of TESLA cavities in linear accelerators driving FEL applications, two TESLA cavities were manufactured and prepared by ACCEL for BESSY. After production, both cavities were prepared for vertical test at ACCEL's premises using state of the art chemical polishing and high pressure water rinsing techniques. The cavities were tested in DESY's vertical RF test installation. Accelerating gradients close to 25 MV/m were reached. One cavity was completed with a helium vessel modified for cw operation and prepared with chemical polishing, high pressure water rinsing, and assembled with the required High Power Coupler at ACCEL. The fully dressed cavity was then shipped under vacuum to BESSY and tested in the horizontal cryostat HoBiCaT. Horizontal RF test results will be presented and compared with the vertical test results.

Cavity Processing and Preparation of 650 MHz Elliptical Cell Cavities for PIP-II

Energy Technology Data Exchange (ETDEWEB)

Rowe, Allan [Fermilab; Chandrasekaran, Saravan Kumar [Fermilab; Grassellino, Anna [Fermilab; Melnychuk, Oleksandr [Fermilab; Merio, Margherita [Fermilab; Reid, Thomas [Argonne (main); Sergatskov, Dmitri [Fermilab

2017-05-01

The PIP-II project at Fermilab requires fifteen 650 MHz SRF cryomodules as part of the 800 MeV LINAC that will provide a high intensity proton beam to the Fermilab neutrino program. A total of fifty-seven high-performance SRF cavities will populate the cryomodules and will operate in both pulsed and continuous wave modes. These cavities will be processed and prepared for performance testing utilizing adapted cavity processing infrastructure already in place at Fermilab and Argonne. The processing recipes implemented for these structures will incorporate state-of-the art processing and cleaning techniques developed for 1.3 GHz SRF cavities for the ILC, XFEL, and LCLS-II projects. This paper describes the details of the processing recipes and associated chemistry, heat treatment, and cleanroom processes at the Fermilab and Argonne cavity processing facilities. This paper also presents single and multi-cell cavity test results with quality factors above 5·10¹⁰ and accelerating gradients above 30 MV/m.

Influence of the power level of an ultra-sonic system on dental cavity preparation Influência do nível de potência de um sistema de ultra-som em preparos cavitários

Directory of Open Access Journals (Sweden)

Érika Botelho Josgrilberg

2007-12-01

Full Text Available The aim of this study was to evaluate the shape of dental cavities made with the CVDentus® system using different ultrasound power levels. One standard cavity was made on the buccal aspect of 15 bovine incisors with a CVDentus® cylindrical bur (82142. The sample was divided into three groups: G1 - ultrasound with power II; G2 - ultrasound with power III; and G3 - ultrasound with power IV. A standardizing device was used to obtain standardized preparations and ultrasound was applied during one minute in each dental preparation. The cavities were sectioned in the middle, allowing observation of the cavity’s profile with a magnifying glass, and width and depth measurement using the Leica Qwin program. The Kruskal-Wallis (p O objetivo deste estudo foi avaliar o formato dos preparos cavitários realizados com o sistema CVDentus® utilizando potências variadas do ultra-som. Uma cavidade padronizada foi realizada na face vestibular de 15 incisivos bovinos utilizando as pontas cilíndricas CVDentus® (82142. A amostra foi dividida em 3 grupos: G1 - ultra-som com potência II; G2 - ultra-som com potência III; e G3 - ultra-som com potência IV. Foi utilizada uma máquina padronizadora de preparos cavitários e o ultra-som foi aplicado durante 1 minuto em cada preparo. As cavidades foram seccionadas no centro, permitindo a visualização do perfil cavitário em uma lupa estereoscópica, e esse foi medido em largura e profundidade por meio do programa Leica Qwin. O teste estatístico Kruskal-Wallis (p < 0,05 e o método de Dunn demonstraram diferenças entre os formatos das cavidades produzidas com as potências III e IV. Entretanto, as cavidades realizadas com a potência III apresentaram dimensões semelhantes às da ponta utilizada. Concluiu-se que a potência indicada pelo fabricante (III é a mais adequada para uso do sistema CVDentus®.

Morphological evaluation of cavity preparation surface after duraphat and Er:YAG laser treatment by scanning electronic microscopy

International Nuclear Information System (INIS)

Rodrigues, Luciane Borelli

2002-01-01

The treatment of dental surface using different lasers to prevent dental caries has been studied for several on last years. The purpose of this in vitro study was to evaluate the morphological changes on dentin surface from pulpal wall of cavity preparations performed by high-speed drill, treated with 2,26% fluoride varnish (Duraphat) and Er:YAG laser, and then submitted after receiving or not to EDTA 15% treatment. Twenty Class V cavities were performed on ten humans molars. The specimens were randomly divided in to 4 groups: group 1- treatment with Duraphat followed by Er:YAG laser irradiation (120 mJ/ 4 Hz); group 2: Er:YAG laser irradiation, same parameters, followed by Duraphat treatment; group 3- same group 1 followed by immersion in EDTA (5 min); group 4 - same as group 2 followed by immersion in EDTA (5 min). The specimens were processed for SEM analysis. The micrographs showed that Duraphat treatment promoted morphological changes on dentin, closing dentinal tubules; the specimens treated by Duraphat and Er:YAG laser and immersed in EDTA (group 3) showed homogeneous surface, closed and protected dentinal tubules, maintenance of the fluoride varnish on the dentin surface and around the dentinal tubules, showing feasible and efficiency of these therapies the feasibility.(author)

Microleakage in conservative cavities varying the preparation method and surface treatment

Directory of Open Access Journals (Sweden)

Juliana Abdallah Atoui

2010-08-01

Full Text Available OBJECTIVE: To assess microleakage in conservative class V cavities prepared with aluminum-oxide air abrasion or turbine and restored with self-etching or etch-and-rinse adhesive systems. Materials and Methods: Forty premolars were randomly assigned to 4 groups (I and II: air abrasion; III and IV: turbine and class V cavities were prepared on the buccal surfaces. Conditioning approaches were: groups I/III - 37% phosphoric acid; groups II/IV - self-priming etchant (Tyrian-SPE. Cavities were restored with One Step Plus/Filtek Z250. After finishing, specimens were thermocycled, immersed in 50% silver nitrate, and serially sectioned. Microleakage at the occlusal and cervical interfaces was measured in mm and calculated by a software. Data were subjected to ANOVA and Tukey's test (α=0.05. RESULTS: Marginal seal provided by air abrasion was similar to high-speed handpiece, except for group I. There was SIGNIFICANT difference between enamel and dentin/cementum margins for to group I and II: air abrasion. The etch-and-rinse adhesive system promoted a better marginal seal. At enamel and dentin/cementum margins, the highest microleakage values were found in cavities treated with the self-etching adhesive system. At dentin/cementum margins, high-speed handpiece preparations associated with etch-and-rinse system provided the least dye penetration. CONCLUSION: Marginal seal of cavities prepared with aluminum-oxide air abrasion was different from that of conventionally prepared cavities, and the etch-and-rinse system promoted higher marginal seal at both enamel and dentin margins.

U.S. Dental Schools' Preparation for the Integrated National Board Dental Examination.

Science.gov (United States)

Duong, Mai-Ly T; Cothron, Annaliese E; Lawson, Nathaniel C; Doherty, Eileen H

2018-03-01

An Integrated National Board Dental Examination (INBDE) combining basic, behavioral, and clinical sciences will be implemented in 2020 to replace the current two-part National Board Dental Examination required for all candidates who seek to practice dentistry in the U.S. The aims of this study were to determine how U.S. dental schools are preparing for implementation of the INBDE and to assess their top administrators' attitudes about the new exam. A total of 150 deans, academic deans, and other administrators at all 64 U.S. dental schools with graduating classes in 2016 were emailed a 19-question electronic survey. The survey questions addressed the respondents' level of support, perceived benefits and challenges, and planned preparation strategies for the INBDE. The individual response rate was 59%, representing 57 of the 64 schools. Approximately 60% of the respondents either agreed or strongly agreed that they support the integrated exam, while roughly 25% either somewhat or strongly disagreed. While most respondents (72%) reported that their institutions would be prepared for the INBDE, 74% reported that the merged exam created additional strain for their institutions. Respondents reported viewing content integration and clinical applicability as benefits of the INBDE, while required curriculum changes and student preparedness and stress were seen as challenges. Most of the respondents reported their schools were currently employing strategies to prepare for the INBDE including meetings with faculty and students and changes to curricula and course content. The beginning of the fourth year and the end of the third year were the most frequently reported times when schools planned to require students to take the INBDE, although almost half of the respondents did not yet know what it would be required at their school. Several schools were reconsidering using the boards as a passing requirement. This study found that support for the INBDE was not universal, but

Can evaluation of a dental procedure at the outset of learning predict later performance at the preclinical level? A pilot study.

LENUS (Irish Health Repository)

Polyzois, Ioannis

2011-05-01

The purpose of this study was to examine the effectiveness of conventional pre-clinical training in dentistry and to determine if evaluation of a dental procedure at the beginning of dental training can be a predictor for future performance. A group of second year dental students with no previous experience in operative dentistry were asked to prepare a conventional class I cavity on a lower first molar typodont. Their first preparation was carried out after an introductory lecture and a demonstration and their second at the end of conventional training. The prepared typodonts were coded and blindly scored for the traditional assessment criteria of outline form, retention form, smoothness, cavity depth and cavity margin angulation. Once the codes were broken, a paired t-test was used to compare the difference between the means of before and after scores (P<0.0001) and a Pearson\\'s linear correlation to test the association (r=0.4). From the results of this study, we could conclude that conventional preclinical training results in a significant improvement in the manual skills of the dental students and that the dental procedure used had only a limited predictive value for later performance at the preclinical level.

The preparation of dental glass-ceramic composites with controlled fraction of leucite crystals

Directory of Open Access Journals (Sweden)

Martina Mrázová

2008-06-01

Full Text Available This work is dealing with synthesis of leucite powder, which can be used for the preparation of dental glassceramic composites by subsequent thermal treatment. Newly developed procedure is based on preparation of dental raw material as a mixture of two separate compounds: the crystalline leucite powder prepared at relatively low temperature and a commercial matrix powder.Hydrothermal synthesis of tetragonal leucite particles (KAlSi2O6 with the average size of about 3 μm was developed in our laboratory. The leucite dental raw material was prepared by mixing of 20 wt.% of synthetic tetragonal leucite with commercial matrix. Dental composites were prepared from the dental raw material by uniaxial pressing and firing up to 960°C. Dilatometric measurements confirmed that the coefficient of thermal expansion increased by 32% when 20 wt.% of the tetragonal leucite was added into the basic matrix. In addition, it was showed that the synthesized leucite powder was suitable for the preparation of leucite composites with controlled coefficient of thermal expansion. High value of the thermal expansion coefficient enables application of prepared composite in metal-ceramics restorations.

Sites of origin of oral cavity cancer in nonsmokers vs smokers: possible evidence of dental trauma carcinogenesis and its importance compared with human papillomavirus.

Science.gov (United States)

Perry, Brendan J; Zammit, Andrew P; Lewandowski, Andrew W; Bashford, Julia J; Dragovic, Adrian S; Perry, Emily J; Hayatbakhsh, Reza; Perry, Christopher F L

2015-01-01

The relatively high and possibly rising incidence of mouth squamous cell carcinoma in nonsmokers, especially women, without obvious cause has been noted by previous authors. Is chronic dental trauma and irritation a carcinogen, and what is its importance compared with human papillomavirus (HPV) oropharyngeal cancer in nonsmokers? To determine whether oral cavity cancers occurred more commonly at sites of dental trauma and how the position of these cancers varied between nonsmokers lacking major identified carcinogens and smokers. If these cancers occurred more frequently at sites of chronic trauma, especially in nonsmokers, it would suggest chronic dental trauma as a possible carcinogen. A retrospective analysis of 881 patients with oral cavity or oropharyngeal cancers seen through a tertiary referral hospital between 2001 and 2011 was performed. Patient medical records were analyzed to determine the location of the tumor within the oral cavity and oropharynx and how it relates to patient demographics, smoking and alcohol histories, and comorbidities. Dental histories were also sought, including use of dentures. Nonsmokers comprised 87 of 390 patients with mouth cancer (22%) and 48 of 334 patients with oropharyngeal cancer (14%). Female nonsmoking patients included 53 with oral cancer (61%) but only 12 with oropharyngeal squamous cell carcinoma (25%). Oral cancers occurred on the lateral tongue, a potential site of chronic dental trauma, in 57 nonsmokers (66%) compared with 107 smokers/ex-smokers (33%) (P Oral cavity cancers occur predominantly at sites of potential dental and denture trauma, especially in nonsmokers without other risk factors. Recognizing teeth irritation as a potential carcinogen would have an impact on prevention and treatment strategies.

Two Oral Midazolam Preparations in Pediatric Dental Patients: A Prospective Randomised Clinical Trial

Directory of Open Access Journals (Sweden)

Katayoun Salem

2015-01-01

Full Text Available Pharmacological sedation is an alternative behavior management strategy in pediatric dentistry. The aim of this study was to compare the behavioral and physiologic effects of “commercially midazolam syrup” versus “orally administered IV midazolam dosage form (extemporaneous midazolam (EF” in uncooperative pediatric dental patients. Eighty-eight children between 4 to 7 years of age received 0.2–0.5 mg/kg midazolam in this parallel trial. Physiologic parameters were recorded at baseline and every 15 minutes. Behavior assessment was conducted objectively by Houpt scale throughout the sedation and North Carolina at baseline and during injection and cavity preparation. No significant difference in behavior was noted by Houpt or North Carolina scale. Acceptable behavior (excellent, very good, and good was observed in 90.9% of syrup and 79.5% of EF subjects, respectively. Physiological parameters remained in normal range without significant difference between groups and no adverse effect was observed. It is concluded that EF midazolam preparation can be used as an acceptable alternative to midazolam syrup.

Marginal microleakage in vitro study on class V cavities prepared with Er:YAG laser and etched with acid or etched with Er:YAG laser and acid

International Nuclear Information System (INIS)

Tavares, Henrique Dutra Simoes

2001-01-01

Microleakage at the interface between the teeth and the restorative materials remains a problem with composite resin restorations. Microleakage at the gingival margins of class V cavities restorations still challenge as they are usually placed in dentin and/or cementum. Previous studies have shown that the cavity preparation with Er:YAG laser is possible. It has been reported that Er:YAG laser has ability to create irregular surface providing micromechanical retention for adhesive dental restorative materials and to improve marginal sealing. The purpose of this in vitro study was to evaluate the marginal microleakage on class V cavities prepared with Er:YAG laser and etched with acid or with Er:YAG laser and acid, in compared to those prepared and etched conventionally. Thirty human molars were divided into three groups, namely: group I - prepared with Er:YAG laser (KaVo KEY Laser II - Germany) and etched with 37% phosphoric acid; group II - prepared with Er:YAG laser and etched with Er:YAG laser and 37% phosphoric acid; group III (control group) - prepared with high speed drill and etched with 37% phosphoric acid. All cavities were treated with same adhesive system (Single Bond - 3M) and restored with the composite resin (Z100 - 3M), according to the manufacturer's instructions. The specimens were stored at 37 deg C in water for 24 hours, polished with Sof-Lex discs (3M), thermally stressed, sealed with a nail polish coating except for the area of the restoration and 1 mm around it, and immersed in a 50% aqueous solution of silver nitrate for 24 hours. After that, the specimens were rinsed in water, soaked in a photodeveloping solution and exposed to a fluorescent light for 8 hours. The teeth were embedded in an autopolymerizing resin and sectioned longitudinally using a diamond saw microtome under running water. The sections were photographed. The microleakage at the occlusal cavity and at the gingival margins of each specimen was evaluated with scores (0-3) by

High-Fidelity Simulation: Preparing Dental Hygiene Students for Managing Medical Emergencies.

Science.gov (United States)

Bilich, Lisa A; Jackson, Sarah C; Bray, Brenda S; Willson, Megan N

2015-09-01

Medical emergencies can occur at any time in the dental office, so being prepared to properly manage the situation can be the difference between life and death. The entire dental team must be properly trained regarding all aspects of emergency management in the dental clinic. The aim of this study was to evaluate a new educational approach using a high-fidelity simulator to prepare dental hygiene students for medical emergencies. This study utilized high-fidelity simulation (HFS) to evaluate the abilities of junior dental hygiene students at Eastern Washington University to handle a medical emergency in the dental hygiene clinic. Students were given a medical emergency scenario requiring them to assess the emergency and implement life-saving protocols in a simulated "real-life" situation using a high-fidelity manikin. Retrospective data were collected for four years from the classes of 2010 through 2013 (N=114). The results indicated that learning with simulation was effective in helping the students identify the medical emergency in a timely manner, implement emergency procedures correctly, locate and correctly utilize contents of the emergency kit, administer appropriate intervention/treatment for a specific patient, and provide the patient with appropriate follow-up instructions. For dental hygiene programs seeking to enhance their curricula in the area of medical emergencies, this study suggests that HFS is an effective tool to prepare students to appropriately handle medical emergencies. Faculty calibration is essential to standardize simulation.

Effect of cavity preparation on the flexural strengths of acrylic resin repairs

Science.gov (United States)

ELHADIRY, Safa Salim; YUNUS, Norsiah; ARIFFIN, Yusnidar Tajul

2010-01-01

Objective To investigate the effect of cavity preparation on the flexural strength of heat-curing denture resin when repaired with an auto-curing resin. Material and methods Ninety-six rectangular specimens (64x10x2.5 mm) prepared from heat-curing denture base resin (Meliodent) were randomly divided into four groups before repair. One group was left intact as control. Each repair specimen was sectioned into two; one group was repaired using the conventional repair method (Group 1). Two groups had an additional transverse cavity (2x3.5x21.5 mm) prepared prior to the repair; one repaired with (Group 2) and one without glass-fiber reinforcement (Group 3). A three-point flexural bending test according to the ISO 1567:1999 specification8 for denture base polymers was carried out on all groups after 1, 7 and 30 days of water immersion. Statistical analysis was carried out using two-way ANOVA, Kruskal Wallis and post-hoc Mann Whitney tests. Results The highest flexural strength was observed in the control group. Control and conventional repairs group (Group 1) showed reduction in the flexural strength 30 days after water immersion. No significant change in the strength was observed for Groups 2 and 3 where the repair joints were similarly prepared with additional transverse cavity. Conclusion Repaired specimens showed lower flexural strength values than intact heat-curing resin. Cavity preparation had no significant effect on the flexural strength of repair with water immersion. PMID:21308283

Assessment of residual coronal tooth structure postendodontic cavity preparation using digital dental impressions and micro-computed tomography.

Science.gov (United States)

Al-Nuaimi, Nassr; Patel, Shanon; Foschi, Federico; Mannocci, Francesco; Austin, Rupert S

To evaluate the in vitro accuracy of digital impressions for three-dimensional (3D) volumetric measurement of residual coronal tooth structure postendodontic cavity preparation, with reference to micro-computed tomography (μCT). Quantification of the accuracy and precision of the intraoral digital scanner (3M True Definition Scanner - IOS) was performed using a metrology gauge block and a profilometric calibration model. Thirty-four human extracted molars with endodontic access cavities were scanned using both intraoral scanning (test scanner) in high-resolution mode, and µCT (reference scanner: GE Locus SP μCT scanner) in high- (HiResCT) and low- (LoResCT) resolution modes. Comparisons of volumetric accuracy and 3D profilometric deviations were performed using surface metrology software. One-way repeated measures analysis of variance (ANOVA), in combination with the Bonferroni post hoc test, was implemented to compare the differences in volume measurements between scanning methods. Digital scanning revealed smaller volume measurements by 1.36% and 0.68% compared to HiResCT and LoResCT, respectively. There was a statistically significant difference in the volumetric measurements obtained from the IOS scanner and both HiResCT and LoResCT scans (P digital scanner was able to reliably measure the extra- and intracoronal aspect of the endodontically accessed tooth.

Effect of radiation on the response of dental pulp to operative and endodontic procedures: an experimental study

International Nuclear Information System (INIS)

Fawzi, M.I.; Shklar, G.; Krakow, A.A.

1985-01-01

Thirty-six 56-day-old male Sprague-Dawley albino rats served as two groups of experimental animals. Group 1 was irradiated with 400 rads delivered as total-body radiation from a cesium source. Group 2 served as the control group and was not irradiated. Three weeks later, the dental microscope was used to facilitate various dental procedures in both groups of animals (cavity preparation filled with zinc oxide-eugenol, pulp exposure capped with zinc oxide-eugenol, and pulp exposure left open). Two animals for each procedure from Groups 1 and 2 were killed at time intervals of 2, 4, and 8 weeks. The results showed that (1) radiation at this dose resulted in a depression of the normal response of the dental pulp to the trauma and infection induced by pulpal exposure, (2) there were no pathologic changes in the untreated molars of the irradiated animals, and (3) the use of the dental microscope greatly facilitated cavity preparation in the molars of rats

[Oral health among adolescents: aspects relating to hygiene, dental cavities and periodontal disease in the cities of Recife and Feira de Santana, Brazil].

Science.gov (United States)

Nogueira dos Santos, Nilton Cesar; Alves, Tecia Daltro Borges; Freitas, Valéria Souza; Jamelli, Silvia Regina; Cavalcanti Sarinho, Emanuel Sávio

2007-01-01

To characterize the oral health in adolescents in the cities of Recife and Feira de Santana, Northeast Brazil by assessment of personal hygiene and dental cavities and periodontal disease. Forty adolescents between ten and eighteen years old were assessed through an exploratory study run in Recife in 2005. In Feira de Santana, 971 adolescents (twelve years old) were examined through a cross section study in 2002. It was assessed cavity status through the number of cavitied, missing and filled teeth, visible dental plaque, bleeding gums and periodontal status. The analysis was based on Chi-Square, Kruskall-Wallis and Fisher tests, with a confidence interval of 95%. The most of adolescents followed oral hygiene practices three times a day. The DMTF values presented a median of 1.5 in Recife and averages of 1.89 in state schools, 2.17 in municipal schools and 2.39 in private schools in Feira de Santana. The bleeding gum in Recife presented a median of 27%, and in Feira de Santana the healthy sextant averages of 4.36, 4.08 and 5.16 in state, municipal and private schools respectively. The frequency of the dental cavities was low, with most of the adolescents reporting good habits of oral hygiene and favorable periodontal conditions.

Effects of low-intensity GaAlAs laser radiation ({lambda}=660 nm) on dentine-pulp interface after class I cavity preparation; Efeitos da radiacao laser GaAlAs ({lambda}=660 nm) em baixa intensidade na interface dentina-polpa pos-preparo cavitario classe 1

Energy Technology Data Exchange (ETDEWEB)

Godoy, Bruno Miranda

2003-07-01

The aim of this study was to investigate the effects of low-intensity irradiation with GaAlAs laser (red emission) on the ultrastructure of dentine-pulp interface after conventionally prepared class I cavity preparation. Two patients with 8 premolars for extraction indicated for orthodontic reasons. Class I cavities were prepared in these teeth that were then divided into two groups. The first group received a treatment with laser with continuous emission, {lambda}=660 nm, with maximum power output of 30 mW. The dosimetry applied was of approximately 2J/cm{sup 2}, directly and perpendicularly into the cavity in only one section. After the irradiation, the cavities were filled with composite resin. The second group received the same treatment, except by the laser therapy. Twenty-eight days after the preparation, the teeth were extracted and were processed for transmission electron microscopy analysis. Two sound teeth, without any preparation, were also studied. The irradiated group presented odontoblastic processes in higher contact with the extracellular matrix and the collagen fibers appeared more aggregated and organized than those of control group. These results were also observed in the healthy-teeth. Thus, we suggest that laser irradiation accelerates the recovery of the dental structures involved in the cavity preparation at the pre-dentine level. (author)

Guided endodontics: accuracy of a novel method for guided access cavity preparation and root canal location.

Science.gov (United States)

Zehnder, M S; Connert, T; Weiger, R; Krastl, G; Kühl, S

2016-10-01

To present a novel method utilizing 3D printed templates to gain guided access to root canals and to evaluate its accuracy in vitro. Sixty extracted human teeth were placed into six maxillary jaw models. Preoperative CBCT scans were matched with intra-oral scans using the coDiagnostix(™) software. Access cavities, sleeves and templates for guidance were virtually planned. Templates were produced by a 3D printer. After access cavity preparation by two operators, a postoperative CBCT scan was superimposed on the virtual planning. Accuracy was measured by calculating the deviation of planned and prepared cavities in three dimensions and angle. Ninety-five per cent confidence intervals were calculated for both operators. All root canals were accessible after cavity preparation with 'Guided Endodontics'. Deviations of planned and prepared access cavities were low with means ranging from 0.16 to 0.21 mm for different aspects at the base of the bur and 0.17-0.47 mm at the tip of the bur. Mean of angle deviation was 1.81°. Overlapping 95% confidence intervals revealed no significant difference between operators. 'Guided Endodontics' allowed an accurate access cavity preparation up to the apical third of the root utilizing printed templates for guidance. All root canals were accessible after preparation. © 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Evaluation of enamel mineral loss around cavities prepared by the Er,Cr:YSGG laser and restored with different materials

Science.gov (United States)

Navarro, Ricardo Scarparo; Lago, Andréa. Dias Neves; Bonifácio, Clarissa Calil; Mendes, Fausto Medeiros; de Freitas, Patrícia Moreira; Baptista, Alessandra; Nunez, Silvia Cristina; Matos, Adriana Bona; Imparato, José Carlos P.

2018-02-01

The aim of this study was to evaluate the enamel demineralization around cavities prepared by Er,Cr:YSGG laser (2780 nm) and restored with different materials after an acid challenge. The human dental enamel samples were randomly divided in 12 groups (n=10): G1- high-speed drill (HD); G2- Er,Cr:YSGG laser L (3 W, 20 Hz, 53.05 J/cm2)(air 65% - water 55%); G3- L (4 W, 20 Hz, 70.74 J/cm2); G4- L (5 W, 20 Hz, 88.43 J/cm2). Each group was divided in subgroups: 1- glass ionomer cement (GIC), 2- resin modified GIC (RMGIC), 3- composite resin (C). Samples were submitted to an acid challenge (4.8 pH) for7 days. The calcium ion contend (ppm/mm2) from demineralizing solutions were analyzed by atomic emission spectrometry. ANOVA and LSD tests were performed (α=5%). The significant lower average values of calcium loss were observed on G2 + GIC, G2 + RMGIC, G1 + RMGIC (penamel demineralization. The findings of this in vitro study suggest that the Er,Cr:YSGG lased cavities restored with GIC or RMGIC or conventional drill cavities with RMGIC were effective on reducing the demineralization around restorations, showing an important potential in preventing secondary caries.

Laser diagnostic and therapy of dental caries: the clinic point of view; Laser diagnostico e tratamento da carie dental: uma visao clinica

Energy Technology Data Exchange (ETDEWEB)

Paiva, Priscila Faria

2001-07-01

Dental caries's diagnosis is a major dentistry problem from the clinic point of view. The laser beam on the region of 655 nm induces the fluorescence of the compounds present in the hard tissue, quantifying differences between sound and carious enamel and dentine. Diagnodent (Kavo, Germany), showed to be effective regarding dental caries's diagnosis in the present research sampling. The Er:YAG laser (Kavo Key Laser 2, Germany) performed efficient cavity preparations in caries lesions of I and V class type, using up energies that ranged from 300 mJ to 350 mJ with 4 Hz repetition rate for the enamel; and from 250 mJ to 300 mJ with 4 Hz repetition rate for the dentine, and with 80 mJ with 6 Hz of repetition rate for laser conditioning. In the Er:YAG laser preparations no patient was anesthetized even when there were deeper cavities, and the maximum degree of pain ( which ranged from 0 to 10) was 4. In the control group with conventional high-speed drill two patients were anesthetized and the maximum degree of pain was 7. Restorations performed by conventional method of composite were equally satisfying both in caries groups of I and V class type and in the control group. The laser application in the operative dentistry office as a new method of diagnosis and dental preparations should be a good alternative to the use of the conventional dental drill. Nevertheless, dentistry practice has a lot to improve from technology progress, as well as new researches on laser dentistry are necessary in a long term. New types of lasers will come about and will increasingly improve the dental practice assistance and procedures quality. (author)

Laser diagnostic and therapy of dental caries: the clinic point of view; Laser diagnostico e tratamento da carie dental: uma visao clinica

Energy Technology Data Exchange (ETDEWEB)

Paiva, Priscila Faria

2001-07-01

Dental caries's diagnosis is a major dentistry problem from the clinic point of view. The laser beam on the region of 655 nm induces the fluorescence of the compounds present in the hard tissue, quantifying differences between sound and carious enamel and dentine. Diagnodent (Kavo, Germany), showed to be effective regarding dental caries's diagnosis in the present research sampling. The Er:YAG laser (Kavo Key Laser 2, Germany) performed efficient cavity preparations in caries lesions of I and V class type, using up energies that ranged from 300 mJ to 350 mJ with 4 Hz repetition rate for the enamel; and from 250 mJ to 300 mJ with 4 Hz repetition rate for the dentine, and with 80 mJ with 6 Hz of repetition rate for laser conditioning. In the Er:YAG laser preparations no patient was anesthetized even when there were deeper cavities, and the maximum degree of pain ( which ranged from 0 to 10) was 4. In the control group with conventional high-speed drill two patients were anesthetized and the maximum degree of pain was 7. Restorations performed by conventional method of composite were equally satisfying both in caries groups of I and V class type and in the control group. The laser application in the operative dentistry office as a new method of diagnosis and dental preparations should be a good alternative to the use of the conventional dental drill. Nevertheless, dentistry practice has a lot to improve from technology progress, as well as new researches on laser dentistry are necessary in a long term. New types of lasers will come about and will increasingly improve the dental practice assistance and procedures quality. (author)

Cytotoxicity of Light-Cured Dental Materials according to Different Sample Preparation Methods

Directory of Open Access Journals (Sweden)

Myung-Jin Lee

2017-03-01

Full Text Available Dental light-cured resins can undergo different degrees of polymerization when applied in vivo. When polymerization is incomplete, toxic monomers may be released into the oral cavity. The present study assessed the cytotoxicity of different materials, using sample preparation methods that mirror clinical conditions. Composite and bonding resins were used and divided into four groups according to sample preparation method: uncured; directly cured samples, which were cured after being placed on solidified agar; post-cured samples were polymerized before being placed on agar; and “removed unreacted layer” samples had their oxygen-inhibition layer removed after polymerization. Cytotoxicity was evaluated using an agar diffusion test, MTT assay, and confocal microscopy. Uncured samples were the most cytotoxic, while removed unreacted layer samples were the least cytotoxic (p < 0.05. In the MTT assay, cell viability increased significantly in every group as the concentration of the extracts decreased (p < 0.05. Extracts from post-cured and removed unreacted layer samples of bonding resin were less toxic than post-cured and removed unreacted layer samples of composite resin. Removal of the oxygen-inhibition layer resulted in the lowest cytotoxicity. Clinicians should remove unreacted monomers on the resin surface immediately after restoring teeth with light-curing resin to improve the restoration biocompatibility.

Dental plaque as a biofilm - a risk in oral cavity and methods to prevent

Directory of Open Access Journals (Sweden)

Renata Chałas

2015-10-01

Full Text Available Bacteria living constantly in the oral cavity are in the form of a biofilm. The biofilm formed on a solid base such as the enamel of the teeth, fillings, restorations, orthodontic appliances or obturators is dental plaque. Disturbance of homeostasis of biofilm, excessive growth or increase in the number of acid-forming bacteria leads to the development of the most common diseases of the oral cavity, i.e. dental caries and periodontal disease. The presence of bacterial biofilm on the walls of the root canal or at the top of the root on an outer wall leads to complications and failure in endodontic treatment. The aim of the study was to present the latest information on the occurrence, development and the role of biofilm in the etiopathogenesis of oral diseases and its control. Based on the literature analyzed, it can be concluded that the biofilm, due to its complex structure and numerous mechanisms of bacteria adaptation, is an effective barrier against the traditional agents with antibacterial properties. There are now great hopes for nanotechnology as an innovative method for obtaining new structures of nanometric size and different properties than source materials. The use of antibacterial properties of nano-silver used in dentistry significantly reduces the metabolic activity and the number of colony forming bacteria and lactic acid production in the biofilm.

[Dental plaque as a biofilm - a risk in oral cavity and methods to prevent].

Science.gov (United States)

Chałas, Renata; Wójcik-Chęcińska, Ilona; Woźniak, Michał J; Grzonka, Justyna; Święszkowski, Wojciech; Kurzydłowski, Krzysztof J

2015-10-13

Bacteria living constantly in the oral cavity are in the form of a biofilm. The biofilm formed on a solid base such as the enamel of the teeth, fillings, restorations, orthodontic appliances or obturators is dental plaque. Disturbance of homeostasis of biofilm, excessive growth or increase in the number of acid-forming bacteria leads to the development of the most common diseases of the oral cavity, i.e. dental caries and periodontal disease. The presence of bacterial biofilm on the walls of the root canal or at the top of the root on an outer wall leads to complications and failure in endodontic treatment. The aim of the study was to present the latest information on the occurrence, development and the role of biofilm in the etiopathogenesis of oral diseases and its control. Based on the literature analyzed, it can be concluded that the biofilm, due to its complex structure and numerous mechanisms of bacteria adaptation, is an effective barrier against the traditional agents with antibacterial properties. There are now great hopes for nanotechnology as an innovative method for obtaining new structures of nanometric size and different properties than source materials. The use of antibacterial properties of nano-silver used in dentistry significantly reduces the metabolic activity and the number of colony forming bacteria and lactic acid production in the biofilm.

Regulation and Measurement of the Heat Generated by Automatic Tooth Preparation in a Confined Space.

Science.gov (United States)

Yuan, Fusong; Zheng, Jianqiao; Sun, Yuchun; Wang, Yong; Lyu, Peijun

2017-06-01

The aim of this study was to assess and regulate heat generation in the dental pulp cavity and circumambient temperature around a tooth during laser ablation with a femtosecond laser in a confined space. The automatic tooth preparing technique is one of the traditional oral clinical technology innovations. In this technique, a robot controlled an ultrashort pulse laser to automatically complete the three-dimensional teeth preparing in a confined space. The temperature control is the main measure for protecting the tooth nerve. Ten tooth specimens were irradiated with a femtosecond laser controlled by a robot in a confined space to generate 10 teeth preparation. During the process, four thermocouple sensors were used to record the pulp cavity and circumambient environment temperatures with or without air cooling. A statistical analysis of the temperatures was performed between the conditions with and without air cooling (p heat generated in the pulp cavity was lower than the threshold for dental pulp damage. These results indicate that femtosecond laser ablation with air cooling might be an appropriate method for automatic tooth preparing.

Dental OCT

Science.gov (United States)

Wilder-Smith, Petra; Otis, Linda; Zhang, Jun; Chen, Zhongping

This chapter describes the applications of OCT for imaging in vivo dental and oral tissue. The oral cavity is a diverse environment that includes oral mucosa, gingival tissues, teeth and their supporting structures. Because OCT can image both hard and soft tissues of the oral cavity at high resolution, it offers the unique capacity to identity dental disease before destructive changes have progressed. OCT images depict clinically important anatomical features such as the location of soft tissue attachments, morphological changes in gingival tissue, tooth decay, enamel thickness and decay, as well as the structural integrity of dental restorations. OCT imaging allows for earlier intervention than is possible with current diagnostic modalities.

Medical emergencies in the dental surgery. Part 1: Preparation of the office and basic management.

Science.gov (United States)

Malamed, Stanley F

2015-12-01

Medical emergencies can and do happen in the dental surgery. In the 20- to 30-year practice lifetime of the typical dentist, he/she will encounter between five and seven emergency situations. Being prepared in advance of the emergency increases the likelihood of a successful outcome. PURPOSE OF THE PAPER: To prepare members of the dental office staff to be able to promptly recognize and efficiently manage those medical emergency situations that can occur in the dental office environment. Preparation of the dental office to promptly recognize and efficiently manage medical emergencies is predicated on successful implementation of the following four steps: basic life support for ALL members of the dental office staff; creation of a dental office emergency team; activation of emergency medial services (EMS) when indicated; and basic emergency drugs and equipment. The basic emergency algorithm (P->C->A->B->D) is designed for implementation in all emergency situations. Prompt implementation of the basic emergency management protocol can significantly increase the likelihood of a successful result when medical emergencies occur in the dental office environment.

Evaluation of the permeability and morphological alteration of the dental surface after apicoectomy, treatment and preparation with Er:YAG and Nd:YAG lasers

International Nuclear Information System (INIS)

Oliveira, Rodrigo Guerra de

2001-01-01

One of the objectives of endodontic treatment is to resolve pathological periapical processes caused by microbial contamination of the dental pulp. Correct execution of the necessary chemical preparation prior to surgery generally results in positive outcomes. However, a percentage of cases do not respond favorably and therefore require retreatment, a conservative therapeutic option. There are meanwhile a number of treatment failures which do not respond to these conservative measures and must therefore be subjected to paraendodontic surgical procedures. One of the principal problems of this therapeutic conduct is linked to the surface permeability of the dentin after apicoectomy and the lack of adequate marginal adaptation between the retrofilling material and the cavity walls. This permits the percolation of microorganisms and their metabolic by products from the system of root canals to the periapical region, thereby compromising the necessary tissue repair. The present work proposes the evaluation of the surface and marginal permeability of cut dentin after apicoectomy and treatment with Er:YAG and Nd:YAG lasers with fiber optics and then retrofilled with intermediate restorative material (IRM). A total of 24 single rooted teeth whose canals were endodontically treated were divided into 3 experimental groups: group I, whose apices were sectioned with an Er:YAG laser and the resulting cavity and the cut dental surface were irradiated with this laser via a 50/10 type fiber; in group II the apicoectomy was conducted with an Er:YAG laser and the resulting cavity and the cut surface were irradiated with a Nd:YAG laser; in group III, the samples were apicoectomized and the cavities were treated with a high speed bur (control group). Analysis of the infiltration of the dye methylene blue throughout the cut dental surface and the reconstruction demonstrated that the samples in the irradiated groups presented lower indices of infiltration than the control group. The

Effects of bleaching agents and adhesive systems in dental pulp: a literature review

OpenAIRE

Oliveira, Maria Antonieta Veloso Carvalho de; Quagliatto, Paulo Sérgio; Magalhães, Denildo; Biffi, João Carlos Gabrielli

2012-01-01

The dental pulp may be exposed to several irritants that are potentially noxious to the health and functions of this tissue. Each type of irritant or injury has different effects on the pulp, which are generally characterized by acute inflammation, chronic inflammation or necrosis. Common examples of irritants are dental caries, cavity preparation procedures, traumatic injuries, and chemical substances like bleaching agents and adhesive systems. The present study aimed to review the current k...

Measurement of in-vivo dosage increase due to dental alloys during therapeutic irradiation of the mouth cavity

International Nuclear Information System (INIS)

Thilmann, C.; Mose, S.; Saran, F.; Schopohl, B.; Boettcher, H.D.

1995-01-01

The degree of dosage increase in the immediate surrounding of metallic dental materials was measured in an in-vivo study during therapeutic irradiation with 60 Co gamma rays in the area of mouth cavity of 11 patients. Measurements were carried out by thermoluminescent dosimetry at permamently fixed golden teeth and alloy specimens containing gold and palladium and amalgam. The following relative dodage values according to a simultanelusly measured reference value were measured at the surface of the different dental materials: 161% near fixed golden caps, 168% near the specimen containing gold in a high percentage, 133% near the specimen of palladium and 161% near the specimen of amalgam. The in vivo measured dosage increases due to metallic dental prosthesis are less than values obtained using back scatter arramgements for irradiating phantoms. Despite this, they could be of clinical relevance. Thus the usage of a mucous membrane protection during irradiation with 60 Co, as a means of preventing local lesions of the oral mucosa, due to dental alloys within the treatment volume remains inevitable. (orig.) [de

Investigation of Plasma Etching for Superconducting RF Cavities Surface Preparation. Final Report

International Nuclear Information System (INIS)

Vuskovic, Leposava

2009-01-01

Our results show that plasma-treated samples are comparable or superior to a BCP sample, both in the size of features and sharpness of the boundaries between individual features at the surface. Plasma treatment of bulk Nb cavities is a promising technique for microwave cavities preparation used in particle acceleration application. Etching rates are sufficiently high to enable efficient removal of mechanically damaged surface layer with high reproducibility. No impurities are deposited on the bulk Nb surface during plasma treatment. Surface topology characteristic are promising for complex cavity geometry, since discharge conforms the profile of the reaction chamber. In view of these experimental results, we propose plasma treatment for producing microwave cavities with high Q factor instead of using bulk Nb treated with wet etching process.

Dental Stem Cell Migration on Pulp Ceiling Cavities Filled with MTA, Dentin Chips, or Bio-Oss

Directory of Open Access Journals (Sweden)

Stefania Lymperi

2015-01-01

Full Text Available MTA, Bio-Oss, and dentin chips have been successfully used in endodontics. The aim of this study was to assess the adhesion and migration of dental stem cells on human pulp ceiling cavities filled with these endodontic materials in an experimental model, which mimics the clinical conditions of regenerative endodontics. Cavities were formed, by a homemade mold, on untouched third molars, filled with endodontic materials, and observed with electron microscopy. Cells were seeded on cavities’ surface and their morphology and number were analysed. The phenomenon of tropism was assessed in a migration assay. All three materials demonstrated appropriate microstructures for cell attachment. Cells grew on all reagents, but they showed a differential morphology. Moreover, variations were observed when comparing cells numbers on cavity’s filling versus the surrounding dentine disc. The highest number of cells was recorded on dentin chips whereas the opposite was true for Bio-Oss. This was confirmed in the migration assay where a statistically significant lower number of cells migrated towards Bio-Oss as compared to MTA and dentin chips. This study highlights that MTA and dentin chips have a greater potential compared to Bio-Oss regarding the attraction of dental stem cells and are good candidates for bioengineered pulp regeneration.

Preparation of Greenberger-Horne-Zeilinger Entangled States in the Atom-Cavity Systems

Science.gov (United States)

Xu, Nan

2018-02-01

We present a new simple scheme for the preparation of Greenberger-Horne-Zeilinger maximally entangled states of two two-level atoms. The distinct feature of the effective Hamiltonian is that there is no energy exchange between the atoms and the cavity.. Thus the scheme is insensitive to the effect of cavity field and the atom radiation.This protocol may be realizable in the realm of current physical experiment.

Preparing the Future Dental Hygiene Workforce: Knowledge, Skills, and Reform.

Science.gov (United States)

Fried, Jacquelyn L; Maxey, Hannah L; Battani, Kathryn; Gurenlian, JoAnn R; Byrd, Tammi O; Brunick, Ann

2017-09-01

With the health care delivery system in transition, the way in which oral health care services are delivered in 2040 will inevitably change. To achieve the aims of reduced cost, improved access, and higher quality and to advance population wellness, oral health care will likely become a more integrated part of medical care. An integrated primary care system would better meet the needs of an increasingly diverse and aging U.S. population with uneven access to health care services. By 2040, trends suggest that a smaller proportion of dental hygienists will work in traditional solo dental offices; many more will practice with multidisciplinary health care teams in large-group dental and medical practices and in a variety of non-traditional community settings. This integration will require changes in how dental hygienists are educated. To shape the skill sets, clinical judgment, and knowledge of future practitioners, current dental hygiene curricula must be reexamined, redirected, and enhanced. This article examines some of the factors that are likely to shape the future of dental hygiene practice, considers the strengths and weaknesses of current curricula, and proposes educational changes to prepare dental hygienists for practice in 2040. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Comparison of Dentin Permeability After Tooth Cavity Preparation with Diamond Bur and Er:YAG Laser

Directory of Open Access Journals (Sweden)

Masoumeh Hasani Tabatabaei

2016-05-01

Full Text Available Objectives: The aim of this study was to compare the permeability of dentin after using diamond bur and Er:YAG laser.Materials and Methods: Seventy-two recently extracted, intact, and restoration-free human permanent molars were used in this study. The samples were randomly divided into three groups of 24 each and class I cavities were prepared as follows. Group 1: High speed diamond bur with air and water spray. Group 2: Er:YAG laser. Group 3: Er:YAG laser followed by additional sub-ablative laser treatment. Each group consisted of two subgroups with different cavity depths of 2mm and 4mm.  The entire cavity floor was in dentin. Two samples from each subgroup were observed under scanning electron microscope (SEM. The external surfaces of other samples were covered with nail varnish (except the prepared cavity and immersed in 0.5% methylene blue solution for 48 hours.  After irrigation of samples with water, they were sectioned in bucco-lingual direction. Then, the samples were evaluated under a stereomicroscope at ×160 magnification. The data were analyzed using two-way ANOVA and Tukey’s HSD test.Results: Two-way ANOVA showed significant difference in permeability between groups 2 and 3 (laser groups with and without further treatment and group 1 (bur group. The highest permeability was seen in the group 1. There was no significant difference in dentin permeability between groups 2 and 3 and no significant difference was observed between different depths (2mm and 4mm.Conclusion: Cavities prepared by laser have less dentin permeability than cavities prepared by diamond bur.

Controlling dental enamel-cavity ablation depth with optimized stepping parameters along the focal plane normal using a three axis, numerically controlled picosecond laser.

Science.gov (United States)

Yuan, Fusong; Lv, Peijun; Wang, Dangxiao; Wang, Lei; Sun, Yuchun; Wang, Yong

2015-02-01

The purpose of this study was to establish a depth-control method in enamel-cavity ablation by optimizing the timing of the focal-plane-normal stepping and the single-step size of a three axis, numerically controlled picosecond laser. Although it has been proposed that picosecond lasers may be used to ablate dental hard tissue, the viability of such a depth-control method in enamel-cavity ablation remains uncertain. Forty-two enamel slices with approximately level surfaces were prepared and subjected to two-dimensional ablation by a picosecond laser. The additive-pulse layer, n, was set to 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70. A three-dimensional microscope was then used to measure the ablation depth, d, to obtain a quantitative function relating n and d. Six enamel slices were then subjected to three dimensional ablation to produce 10 cavities, respectively, with additive-pulse layer and single-step size set to corresponding values. The difference between the theoretical and measured values was calculated for both the cavity depth and the ablation depth of a single step. These were used to determine minimum-difference values for both the additive-pulse layer (n) and single-step size (d). When the additive-pulse layer and the single-step size were set 5 and 45, respectively, the depth error had a minimum of 2.25 μm, and 450 μm deep enamel cavities were produced. When performing three-dimensional ablating of enamel with a picosecond laser, adjusting the timing of the focal-plane-normal stepping and the single-step size allows for the control of ablation-depth error to the order of micrometers.

Sanjad-Sakati Syndrome Dental Management: A Case Report

Directory of Open Access Journals (Sweden)

Hisham Y. El Batawi

2013-01-01

Full Text Available Sanjad-Sakati syndrome (SSS is a rare genetic disorder with autosomal recessive pattern of inheritance characterized by hypoparathyroidism, sever growth failure, mental retardation, susceptibility to chest infection, and dentofacial anomalies. A child with SSS was referred to the dental departmentseeking dental help for sever dental caries which was attributed to his dietary habits and quality of dental tissues. Full restorative rehabilitation was done under general anesthesia. Two years later, the child presented with recurrent caries affecting uncrowned teeth. High carries recurrence rate was blamed for the nutritional habits endorsed by the parents. Only steel crowned teeth survived such hostile oral environment which suggested shifting of treatment strategy towards full coverage restorations instead of classical cavity preparations and fillings during a second attempt for dental treatment under general anesthesia and for the dental treatment of two cousins of the same child. The author recommends effective health education for parents including the nature of their child’s genetic disorder, nutritional needs, and dental health education to improve the life style of such children.

Active measurement-based quantum feedback for preparing and stabilizing superpositions of two cavity photon number states

Science.gov (United States)

Berube-Lauziere, Yves

The measurement-based quantum feedback scheme developed and implemented by Haroche and collaborators to actively prepare and stabilize specific photon number states in cavity quantum electrodynamics (CQED) is a milestone achievement in the active protection of quantum states from decoherence. This feat was achieved by injecting, after each weak dispersive measurement of the cavity state via Rydberg atoms serving as cavity sensors, a low average number classical field (coherent state) to steer the cavity towards the targeted number state. This talk will present the generalization of the theory developed for targeting number states in order to prepare and stabilize desired superpositions of two cavity photon number states. Results from realistic simulations taking into account decoherence and imperfections in a CQED set-up will be presented. These demonstrate the validity of the generalized theory and points to the experimental feasibility of preparing and stabilizing such superpositions. This is a further step towards the active protection of more complex quantum states than number states. This work, cast in the context of CQED, is also almost readily applicable to circuit QED. YBL acknowledges financial support from the Institut Quantique through a Canada First Research Excellence Fund.

Preparation of niobium coated copper superconducting rf cavities for the large electron positron collider

International Nuclear Information System (INIS)

Benvenuti, C.; Bloess, D.; Chiaveri, E.; Hilleret, N.; Minestrini, M.; Weingarten, W.

1988-01-01

Since 1980 development work has been carried out at CERN aiming at producing niobium coated superconducting RF cavities in the framework of the foreseen LEP energy upgrading above the initial 55 GeV. During 1987 a 4-cell LEP cavity without coupling ports has been successfully coated for the first time. Meanwhile, cathodes for coating the coupling ports were built and tested. The effort has been subsequently directed to preparing at least one (possibly 2) coated cavity(ies) to be installed in LEP during 1989. In this paper the various production steps of these cavities are reconsidered in view of industrial production

Laser diagnostic and therapy of dental caries: the clinic point of view

International Nuclear Information System (INIS)

Paiva, Priscila Faria

2001-01-01

Dental caries's diagnosis is a major dentistry problem from the clinic point of view. The laser beam on the region of 655 nm induces the fluorescence of the compounds present in the hard tissue, quantifying differences between sound and carious enamel and dentine. Diagnodent (Kavo, Germany), showed to be effective regarding dental caries's diagnosis in the present research sampling. The Er:YAG laser (Kavo Key Laser 2, Germany) performed efficient cavity preparations in caries lesions of I and V class type, using up energies that ranged from 300 mJ to 350 mJ with 4 Hz repetition rate for the enamel; and from 250 mJ to 300 mJ with 4 Hz repetition rate for the dentine, and with 80 mJ with 6 Hz of repetition rate for laser conditioning. In the Er:YAG laser preparations no patient was anesthetized even when there were deeper cavities, and the maximum degree of pain ( which ranged from 0 to 10) was 4. In the control group with conventional high-speed drill two patients were anesthetized and the maximum degree of pain was 7. Restorations performed by conventional method of composite were equally satisfying both in caries groups of I and V class type and in the control group. The laser application in the operative dentistry office as a new method of diagnosis and dental preparations should be a good alternative to the use of the conventional dental drill. Nevertheless, dentistry practice has a lot to improve from technology progress, as well as new researches on laser dentistry are necessary in a long term. New types of lasers will come about and will increasingly improve the dental practice assistance and procedures quality. (author)

21 CFR 872.3700 - Dental mercury.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental mercury. 872.3700 Section 872.3700 Food and... DENTAL DEVICES Prosthetic Devices § 872.3700 Dental mercury. (a) Identification. Dental mercury is a... dental cavity or a broken tooth. (b) Classification. Class I. ...

Preparation of genuine Yeo-Chua entangled state and teleportation of two-atom state via cavity QED

Institute of Scientific and Technical Information of China (English)

无

2010-01-01

We first propose a scheme for preparing the genuine Yeo-Chua 4-qubit entangled state via cavity QED. Using the genuine Yeo-Chua atomic state, we further propose a cavity QED scheme for teleporting an arbitrary two-atom state. In two schemes the large-detuning is chosen and the necessary time is designed to be much shorter than Rydberg-atom’s lifespan. Both schemes share the distinct advantage that cavity decay and atom decay can be neglected. As for the interaction manipulation, our preparation scheme is more feasible than a recent similar one. Compared with the Yeo and Chua’s scheme, our teleportation scheme has significantly reduced the measuring difficulty.

SEM evaluation of the morphological changes in hard dental tissues prepared by Er: YAG laser and rotary instruments

Directory of Open Access Journals (Sweden)

Tomov Georgi

2010-09-01

Full Text Available Effective ablation of dental hard tissues by means of the erbium:yttrium-aluminum garnet (Er: YAG laser has been reported recently, and its application to caries removal and cavity preparation has been expected. However, few studies have investigated the morphological changes in hard dental tissues after Er: YAG laser caries treatment. In the present study the morphological changes in hard dental tissues after Er: YAG laser caries ablation in vitro was compared with that of conventional mechanical treatment. Thirty extracted human teeth with caries were used. Ten tooth was treated with the Er: YAG laser, and the other was treated with a conventional steel and diamond burs. Laser treatment was performed by means of a non-contact irradiation modes with cooling water spray, with a new Er: YAG laser (LiteTouch. Conventional bur treatment was conducted by means of a low-speed micromotor and air turbine with water cooling. Scanning electron microscope (SEM observations were performed for each treatment. The Er: YAG laser ablated carious dentin effectively with minimal thermal damage to the surrounding intact dentin, and removed infected and softened carious dentin to the same degree as the burtreatment. In addition, a lower degree of vibration was noted with the Er: YAG laser treatment. The SEM examination revealed characteristic micro-irregularities of the lased dentin and enamel surfaces with potential benefits for adhesive restorations. Our results show that the Er: YAG laser is promising as a new technical modality for caries treatment

Effectiveness of benzocaine in reducing deep cavity restoration and post-extraction stress in dental patients

Directory of Open Access Journals (Sweden)

Khalid H. Al-Samadani

2015-11-01

Full Text Available Objectives: To investigate the effectiveness of topical anesthetic, 20% benzocaine in relieving pain and stress in patients following deep cavity restoration and extraction of teeth under local anesthesia (LA. Methods: A prospective clinical trial was conducted from October 2014 until April 2015 at Taibah University, Al Madinah Al Munawarah, Kingdom of Saudi Arabia. Forty-five patients were included in the 20% benzocaine group, and 46 in the normal saline group. Evaluation of the dental stress was made pre-operatively and immediately post-operative treatment using the visual analogue scale (VAS. Furthermore, discomfort of the injections were recorded by the patients after each treatment on standard 100 mm VAS, tagged at the endpoints with “no pain” (0 mm and “unbearable pain” (100 mm. Results: There were statistically significant differences between the mean stress scores for patients in the benzocaine and normal saline groups post-operatively (p=0.002. There were significant differences between the mean pain scores for patients in the post buccal injection (p=0.001, post palatal injection (p=0.01, and the post inferior alveolar nerve block groups (p=0.02. Buccal, palatal, and inferior alveolar nerve block injections were more painful for patients in the normal saline group than the benzocaine group. Conclusion: This investigation has demonstrated that post-operative stress associated with deep cavity restoration and dental extractions under LA can be reduced by the application of topical anesthetic (20% benzocaine at the operative site for intra-oral injections.

Dental students' self-assessment of operative preparations using CAD/CAM: a preliminary analysis.

Science.gov (United States)

Mays, Keith A; Levine, Eric

2014-12-01

The Commission on Dental Accreditation (CODA)'s accreditation standards for dental schools state that "graduates must demonstrate the ability to self-assess." Therefore, dental schools have developed preclinical and clinical self-assessment (SA) protocols aimed at fostering a reflective process. This study comparing students' visual SA with students' digital SA and with faculty assessment was designed to test the hypothesis that higher agreement would occur when utilizing a digital evaluation. Twenty-five first-year dental students at one dental school participated by preparing a mesial occlusal preparation on tooth #30 and performing both types of SAs. A faculty evaluation was then performed both visually and digitally using the same evaluation criteria. The Kappa statistic was used to measure agreement between evaluators. The results showed statistically significant moderate agreement between the faculty visual and faculty digital modes of evaluation for occlusal shape (K=0.507, p=0.002), proximal shape (K=0.564, p=0.001), orientation (K=0.425, p=0.001), and definition (K=0.480, p=0.001). There was slight to poor agreement between the student visual and faculty visual assessment, except for preparation orientation occlusal shape (K=0.164, p=0.022), proximal shape (K=-0.227, p=0.032), orientation (K=0.253, p=0.041), and definition (K=-0.027, p=0.824). This study showed that the students had challenges in self-assessing even when using CAD/CAM and the digital assessment did not improve the amount of student/faculty agreement.

Implementation of quantum controlled phase gate and preparation of multiparticle entanglement in cavity QED

International Nuclear Information System (INIS)

Wu Xi; Chen Zhi-Hua; Chen Yue-Hua; Ye Ming-Yong; Lin Xiu-Min; Zhang Yong

2011-01-01

Schemes are presented for realizing quantum controlled phase gate and preparing an N-qubit W-like state, which are based on the large-detuned interaction among three-state atoms, dual-mode cavity and a classical pulse. In particular, a class of W states that can be used for perfect teleportation and superdense coding is generated by only one step. Compared with the previous schemes, cavity decay is largely suppressed because the cavity is only virtually excited and always in the vacuum state and the atomic spontaneous emission is strongly restrained due to a large atom—field detuning. (general)

21 CFR 872.3250 - Calcium hydroxide cavity liner.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Calcium hydroxide cavity liner. 872.3250 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3250 Calcium hydroxide cavity liner. (a) Identification. A calcium hydroxide cavity liner is a device material intended to be applied to the interior of a...

Human dental enamel and dentin structural effects after Er:YAG laser irradiation.

Science.gov (United States)

Lima, Darlon Martíns; Tonetto, Mateus Rodrigues; de Mendonça, Adriano Augusto Melo; Elossais, André Afif; Saad, José Roberto Cury; de Andrade, Marcelo Ferrarezi; Pinto, Shelon Cristina Souza; Bandéca, Matheus Coelho

2014-05-01

Ideally projected to be applied on soft tissues, infrared lasers were improved by restorative dentistry to be used in hard dental tissues cavity preparations--namely enamel and dentin. This paper evidentiates the relevant aspects of infrared Erbium laser's action mechanism and its effects, and characterizes the different effects deriving from the laser's beams emission. The criteria for use and selection of optimal parameters for the correct application of laser systems and influence of supporting factors on the process, such as water amount and its presence in the ablation process, protection exerted by the plasma shielding and structural factors, which are indispensable in dental tissues cavity preparation related to restorative technique, are subordinated to optical modifications caused by the interaction of the energy dissipated by these laser light emission systems in the targeted tissue substrate. Differences in the action of infrared Erbium laser system in regard to the nature of the ablation process and variations on the morphological aspects observed in the superficial structure of the target tissue irradiated, may be correlated to the structural optical modifications of the substrate produced by an interaction of the energy propagated by laser systems.

An Industrial Dental-Erosion by Chromic Acid: A Case Report

Science.gov (United States)

Dülgergil, Ç. Türksel; Erdemir, Ebru Olgun; Ercan, Ertuḡrul; Erdemir, Ali

2007-01-01

A case of uncommon occupational dental erosion was reported in an individual who had worked in the war industry for twenty years. This occupation involved daily, at least 8 hours, inhalation of chromic acid being used for cleaning of barrel of cannons. The erosion manifested as dental sensitivity with excessive cervical erosion even with pulpal exposure in certain teeth. Moreover, due to the adverse effect of the chemical against to gingival and/or periodontal tissues, the lesions were extremely harmful with respect to the exposed root-cementum. After proper periodontal therapy, cervical lesions were treated conservatively with a compomer based restorative material without cavity preparation. Although today it is not common due to the well-controlled working conditions, occupational combined dental and medical problems via airborne fumes and/or elements can be seen at workers in chemical factories. A cumulative biohazardous effect is generally seen as not only medical but also dental disorders. PMID:19212488

21 CFR 872.6030 - Oral cavity abrasive polishing agent.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Oral cavity abrasive polishing agent. 872.6030... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing agent. (a) Identification. An oral cavity abrasive polishing agent is a device in paste or powder form...

[Dysbiosis and its consequences on oral cavity in children and adolescents].

Science.gov (United States)

Suladze, T; Shishniashvili, T; Margvelashvili, V; Makhviladze, M

2015-05-01

Gastrointestinal tract (GIT) diseases in children are often accompanied by changes in oral cavity, which is caused by common function of GIT and oral cavity organs. During last years, the number of dysbiosis of various severities has dramatically increased, which directly affects the oral cavity - dental hard tissue mineralization, especially in children and adolescents. The aim of our study was to identify the frequency of dysbiosis in children and adolescents and its influence on dental and general health. 279 patients aged 1 - 17 years were examined. Examinations have shown, that in patients with I-II degree dysbiosis spread and intensity (DMF index) of dental caries is significantly lower - 58,2% and 2,7 intensity, compared to III-IV degree dysbiosis, where 71,8% have caries with 4,2 intensity. According to this, dental and general health status in children and adolescents is highly dependent on severity of GI tract pathologies, particularly on qualitative and/or quantitative content of microbyotes of GI tract.

Distribution of pathogenic microorganisms isolated from dental hospital workers in Korea

Directory of Open Access Journals (Sweden)

Su Jung Kim

2013-04-01

Full Text Available With the significant rise in hospital infection management in dental hospitals as well as in hospitals, and in order to identify the distribution of pathogenic bacteria on hands and nasal cavity of workers in a dental hospital, bacteria from the hands and nasal cavities of six dentists and 44 dental hygienists from four dental hospitals were investigated. The results showed Staphylococcus aureus (13, Staphylococcus capitis (1, Staphylococcus epidermidis (12, Staphylococcus hominis (4, Staphylococcus warneri (3, Staphylococcus xylosus (14, Staphylococcus. Lugdunensis (1, and Neisseria spp. (2 were isolated from the nasal cavity and Staphylococcus aureus (9, Staphylococcus capitis (4, Staphylococcus epidermidis (16, Staphylococcus hominis (8, Staphylococcus warneri (5, Staphylococcus xylosus (22, Staphylococcus leutus (3, Micrococcus spp. (4, Staphylococcus cohnii (1, Serratia marcescens (2, Pseudomonas aeruginosa (3, Klebsiella pneumonia (2 and Pseudomonas pneumotropica (1 from the hands. An antimicrobial disk diffusion test was conducted on Staphylococcus aureus isolated from the hands and nasal cavity to detect MRSA by means of oxacillin. Two strains were detected. When the genes of penicillin binding protein 2 (mecA were detected from the 2 strains, MRSA was found from both strains. The results of this investigation on the distribution of various pathogenic bacteria and MRSA on hands and nasal cavity of workers of a dental hospital, will contribute to the basic data for the future infection management in a dental hospital.

What's a Cavity?

Science.gov (United States)

... and deeper over time. Cavities are also called dental caries (say: KARE-eez), and if you have a ... made up mostly of the germs that cause tooth decay. The bacteria in your mouth make acids and when plaque clings to your teeth, the acids can eat away at the outermost ...

Non-traditional alternatives project for the control of dental biofilm alternative substances with antibacterial action for the disinfection of cavities

International Nuclear Information System (INIS)

Alfaro Mendez, Daniela; Correa Herrera, Graciela; Rivas Dona, Carmina

2013-01-01

The extracts of medicinal plants found in Costa Rica such as hawthorn, garlic and black tea were compared with Concepsis®, a product based on chlorhexidine used for the disinfection of dental cavities. The efficacy of the three plants was measured against S. mutans in in vitro cultures. Chlorhexidine has a higher bacteriostatic and bactericidal activity than the extracts of the three plants used, being the most effective agent against S. mutans [es

Assessing the Penetrating Abilities of Experimental Preparation with Dental Infiltrant Features Using Optical Microscope: Preliminary Study.

Science.gov (United States)

Skucha-Nowak, Małgorzata; Machorowska-Pieniążek, Agnieszka; Tanasiewicz, Marta

2016-01-01

The aim of the infiltration technique is to penetrate demineralized enamel with a low viscosity resin. Icon® (DMG) is the first ever and so far the only dental infiltrant. Bacteriostaticity is one of the properties that should be inherent in dental infiltrants, but Icon lacks this feature. The aim of the preliminary study was to properly choose a dye which would allow us to assess the penetrating abilities of our own, experimental preparation with features of a dental infiltrant with bacteriostatic properties and to compare using an optical microscope the depth of infiltration of the designed experimental preparation with the infiltrant available on the market. The preparation is supposed to infiltrate decalcified human enamel and be assessed with an optical microscope. Eosin, neutral fuchsine and methylene blue were added to experimental preparation with dental infiltrant features and to Icon® (DMG) in order to assess the depth of penetration of the experimental solution into the decalcified layers of enamel. The experimental solution mixes well with eosin, neutral fuchsine, and methylene blue. During the preliminary study, the authors concluded that the experimental solution mixes well with methylene blue, neutral fuchsine, and eosin. An addition of eosin to a preparation which infiltrates inner, demineralized enamel layers, facilitates the assessment of such a preparation with an optical microscope. A designed experimental solution with the main ingredients, i.e., 2-hydroxyethyl methacrylate (HEMA) and tetraethylene glycol dimethacrylate (TEGDMA) with a ratio of 75% to 25% penetrates the demineralized (decalcified) inner parts of the enamel and polymerizes when exposed to light. In order to assess the infiltration of the experimental solution into the demineralized enamel layers, it is required to improve the measurement techniques that utilize optical microscopy.

A simple working classification proposed for the latrogenic lesions of teeth and associated structures in the oral cavity.

Science.gov (United States)

Shamim, Thorakkal

2013-09-01

Iatrogenic lesions can affect both hard and soft tissues in the oral cavity, induced by the dentist's activity, manner or therapy. There is no approved simple working classification for the iatrogenic lesions of teeth and associated structures in the oral cavity in the literature. A simple working classification is proposed here for iatrogenic lesions of teeth and associated structures in the oral cavity based on its relation with dental specialities. The dental specialities considered in this classification are conservative dentistry and endodontics, orthodontics, oral and maxillofacial surgery and prosthodontics. This classification will be useful for the dental clinician who is dealing with diseases of oral cavity.

Eruption of Odontomas into the Oral Cavity: A Report of 2 Cases

Directory of Open Access Journals (Sweden)

Sreenivasan Bhargavan Sarojini

2014-01-01

Full Text Available Odontomas are the commonest odontogenic tumors of the oral cavity and are by nature asymptomatic. They consist mainly of dental tissue that may or may not be arranged in an orderly fashion. Their presence is often detected accidentally or due to the presence of a dental disturbance such as an unerupted tooth. The very rarity of odontomas erupting into the oral cavity validates the need for more current literature on the phenomenon. Our report of two cases aims to present and discuss the rare event of an erupting odontoma with the dental community.

A survey of collection development for United States Medical Licensing Examination (USMLE) and National Board Dental Examination (NBDE) preparation material.

Science.gov (United States)

Hendrix, Dean; Hasman, Linda

2008-07-01

The research sought to ascertain medical and dental libraries' collection development policies, evaluation methods, purchase decisions, and issues that relate to print and electronic United States Medical Licensing Examination (USMLE) and National Board Dental Examination (NBDE) preparation materials. The investigators surveyed librarians supporting American Association of Medical Colleges (AAMC)-accredited medical schools (n = 58/125) on the USMLE and librarians supporting American Dental Association (ADA)-accredited dental schools (n = 23/56) on the NBDE. The investigators analyzed the data by cross-tabulating and filtering the results using EFM Continuum web survey software. Investigators also surveyed print and electronic USMLE and NBDE preparation materials from 2004-2007 to determine the number of publications and existence of reviews. A majority of responding AAMC libraries (62%, n = 58) provide at least 1 electronic or online USMLE preparation resource and buy an average of 11.6 print USMLE titles annually. Due to a paucity of NBDE print and electronic resources, ADA libraries bought significantly fewer print resources, and only 1 subscribed to an electronic resource. The most often reported evaluation methods for both populations were feedback from medical or dental students, feedback from medical or dental faculty, and online trials. Some AAMC (10%, n = 58) and ADA libraries (39%, n = 23) libraries reported that no evaluation of these materials occured at their libraries. From 2004-2007, publishers produced 45 USMLE preparation resources (total n = 546) to every 1 NBDE preparation resource (total n = 12). Users' needs, institutional missions and goals, financial status, and official collection policies most often underlie decisions to collect or not collect examination preparation materials. Evaluating the quality of examination preparation materials can be problematic due to lack of published reviews, lack of usability testing by libraries, and

Scanning electron microscopy evaluation of the interaction pattern between dentin and resin after cavity preparation using Er:YAG laser

International Nuclear Information System (INIS)

Schein, Marcelo Thome

2001-01-01

The aim of this study was to describe the interaction pattern formed between dentin and resin on cavities prepared with an erbium laser (Er:YAG). The morphological aspect of the irradiated dentin after acid etching was also observed. Ten dentin disks were obtained from fresh extracted third molars. Each disk received two cavities, one prepared with a conventional high-speed drill, while the other cavity was obtained by the use of an Er:YAG laser (KaVo KEY Laser, KaVo Co.). The laser treatment was performed with 250 mJ/pulse, 4 Hz, non contact mode, focused beam, and a fine water mist was used. Five disks were prepared for morphological analysis of the acid etched dentin. The other five disks had their cavities restored with Single Bond (3M) followed by Z100 resin (3M). The specimens were observed under scanning electron microscopy after dentin-resin interface demineralization and deproteinization. It was observed that the morphological characteristics of the acid-etched irradiated dentin were not favorable to the diffusion of monomers through the collagen network. The dentin resin interfacial aspect of irradiated dentin, after acid etching, showed thin tags and scarce hybridization zones, which agreed with the morphology of the irradiated and acid-etched dentin substrate observed. (author)

Tooth structure and fracture strength of cavities

DEFF Research Database (Denmark)

Mondelli, José; Sene, Fábio; Ramos, Renata Pereira

2007-01-01

This study evaluated, in vitro, the loss of tooth substance after cavity preparation for direct and indirect restorations and its relationship with fracture strength of the prepared teeth. Sixty sound human maxillary first premolars were assigned to 6 groups (n=10). MOD direct composite cavities......) or 1/2 (Groups III and VI) of the intercuspal distance. Teeth were weighed (digital balance accurate to 0.001 g) before and after preparation to record tooth substance mass lost during cavity preparation. The prepared teeth were submitted to occlusal loading to determine their fracture strength using...... mass loss (13.91%) than composite resin preparations with the same width (10.02%). 1/2-inlay cavities had 21.34% of mass loss versus 16.19% for the 1/2-composite resin cavities. Fracture strength means (in kgf) were: GI = 187.65; GII = 143.62; GIII = 74.10; GIV = 164.22; GV = 101.92; GVI = 50...

Study on the relationship between Helicobacter pylori in the dental plaque and the occurrence of dental caries or oral hygiene index.

Science.gov (United States)

Liu, Ying; Lin, Huanjian; Bai, Yang; Qin, Xiaoshu; Zheng, Xin; Sun, Yong; Zhang, Yali

2008-08-01

The aims of our study were to determine the presence of Helicobacter pylori DNA in the dental plaque of Chinese children aged 3-6 years by nested polymerase chain reaction (PCR) and to investigate the relationship between this infection and the occurrence of dental caries or oral hygiene index. Two hundred and fourteen children from a kindergarten in Guangzhou City of China were evaluated. The children's plaques were assessed by plaque indices of Quigley-Hein. Dental plaque was analyzed using nested PCR for two sets of primers directed to the 860-bp fragment of H. pylori genomic DNA, which have been reported to be highly sensitive and specific by other researchers. H. pylori was detected in dental plaque samples from 126 children, and 70 children with dental caries carried H. pylori in dental plaque. Of these children without infection, only 36 of 88 suffered dental caries. Besides, the average dental plaque index of 126 H. pylori-positive children was higher than that of 88 children without infection. In the present study, there was a significant correlation between H. pylori infection and dental caries or dental hygiene. The oral cavity may be a reservoir for H. pylori infection in children. H. pylori in dental plaque may play a role in the occurrence of dental caries, and poor oral hygiene may represent a risk factor for H. pylori in the oral cavity.

[The microbiological aspects of orthodontic treatment of children with dental maxillary anomalies].

Science.gov (United States)

Chesnokov, V A; Chesnokova, M G; Leontiev, V K; Mironov, A Yu; Lomiashvili, L M; Kriga, A S

2015-03-01

The issues of pre-nosologic diagnostic and effectiveness of treatment of diseases of oral cavity is an actual issue in dentistry. The long- duration orthodontic treatment of patients with dentoalveolar anomalies using non-removable devices is followed by such negative consequences as development demineralization of enamel and caries registered during treatment and after remove ofdevices. The level of quantitative content of oral streptococci was analyzed and dental status in children with dentoalveolar anomalies was evaluated during treatment with non-removable devices was evaluated. The caries and inflammation of periodontium of oral cavity were most often detected in children with high level of content of streptococci. In different periods of study the firm tendency of increasing of concentration of Streptococcus mutans and S. sanguis of dental plaque of oral cavity is established. The established index indicators of dental status of patients testify intensity of caries damage, level of poor hygiene of oral cavity, development of average degree of severity of inflammation process of periodontium. The obtained results substantiate involvement ofstreptococci, associates of microbiota of dental plaque of oral cavity in children, in process of development of caries. The characteristics of micro-ecology of dental plaque to evaluate cariesgenic situation that can be used as a basis for constructing diagnostic algorithm under monitoring of patients with dentoalveolar anomalies with purpose of forthcoming planning and implementation of effective orthodontic treatment.

A virtual reality dental simulator predicts performance in an operative dentistry manikin course.

Science.gov (United States)

Imber, S; Shapira, G; Gordon, M; Judes, H; Metzger, Z

2003-11-01

This study was designed to test the ability of a virtual reality dental simulator to predict the performance of students in a traditional operative dentistry manikin course. Twenty-six dental students were pre-tested on the simulator, prior to the course. They were briefly instructed and asked to prepare 12 class I cavities which were automatically graded by the simulator. The instructors in the manikin course that followed were unaware of the students' performances in the simulator pre-test. The scores achieved by each student in the last six simulator cavities were compared to their final comprehensive grades in the manikin course. Class standing of the students in the simulator pre-test positively correlated with their achievements in the manikin course with a correlation coefficient of 0.49 (P = 0.012). Eighty-nine percent of the students in the lower third of the class in the pre-test remained in the low performing half of the class in the manikin course. These results indicate that testing students in a dental simulator, prior to a manikin course, may be an efficient way to allow early identification of those who are likely to perform poorly. This in turn could enable early allocation of personal tutors to these students in order to improve their chances of success.

A comparison between audio and audiovisual distraction techniques in managing anxious pediatric dental patients

Directory of Open Access Journals (Sweden)

Prabhakar A

2007-01-01

Full Text Available Pain is not the sole reason for fear of dentistry. Anxiety or the fear of unknown during dental treatment is a major factor and it has been the major concern for dentists for a long time. Therefore, the main aim of this study was to evaluate and compare the two distraction techniques, viz, audio distraction and audiovisual distraction, in management of anxious pediatric dental patients. Sixty children aged between 4-8 years were divided into three groups. Each child had four dental visits - screening visit, prophylaxis visit, cavity preparation and restoration visit, and extraction visit. Child′s anxiety level in each visit was assessed using a combination of four measures: Venham′s picture test, Venham′s rating of clinical anxiety, pulse rate, and oxygen saturation. The values obtained were tabulated and subjected to statistical analysis. It was concluded that audiovisual distraction technique was more effective in managing anxious pediatric dental patient as compared to audio distraction technique.

Quantitative assessment of the enamel machinability in tooth preparation with dental diamond burs.

Science.gov (United States)

Song, Xiao-Fei; Jin, Chen-Xin; Yin, Ling

2015-01-01

Enamel cutting using dental handpieces is a critical process in tooth preparation for dental restorations and treatment but the machinability of enamel is poorly understood. This paper reports on the first quantitative assessment of the enamel machinability using computer-assisted numerical control, high-speed data acquisition, and force sensing systems. The enamel machinability in terms of cutting forces, force ratio, cutting torque, cutting speed and specific cutting energy were characterized in relation to enamel surface orientation, specific material removal rate and diamond bur grit size. The results show that enamel surface orientation, specific material removal rate and diamond bur grit size critically affected the enamel cutting capability. Cutting buccal/lingual surfaces resulted in significantly higher tangential and normal forces, torques and specific energy (pmachinability for clinical dental practice. Copyright © 2014 Elsevier Ltd. All rights reserved.

Histopathological study of the effects of low-intensity laser irradiation (λ=650 nm) on dental pulp tissue after cavity pre paration

International Nuclear Information System (INIS)

Bertella, Claudio

2001-01-01

The purpose of this study was to evaluate (in vivo) the effects of low-intensity Arsenide Gallium Aluminium laser application post-cavity preparation class 1. Six patients with bilateral pre-molars and molars indicated to extraction for orthodontics aim were selected. Four samples of these teeth underwent cavity preparation with deep from medium to high and two samples underwent cavity preparation from high to pulp expositions. The samples were constituted of two teeth of the same patient and received different treatments. One of the teeth underwent laser exposition and the other one was maintained as control, before restorative procedure with polycarboxylate cement. A diode laser (λ=650 nm), output power 30 mW and fluencies of 1,8 J/cm 2 and 2,7 J/cm 2 in pre-molars and molars, respectively, was used for irradiation with repetition rate of 18 Hz in interrupted continuous wave mode. After seven days, the teeth were extracted and processed histologically with HE to verify morphological changes in the pulpy tissue. The four samples, which cavity preparation and restorative material were not in contact with the pulp, did not show histological differences between irradiated and non-irradiated teeth. Both of them presented the same characteristics of normality. The two samples with exposed pulpy tissue showed different results. The irradiated teeth presented no or slight inflammatory signs when compared to the control samples, which showed abscess in the coronary pulp interior and intense inflammatory infiltrated. These results suggest that the laser irradiation can be used as a therapeutic modality in clinical trials, in the conditions employed in this study. (author)

Effect of type of cavity preparation (bur,Er:YAG laser) and restorative materials on prevention of caries lesion

OpenAIRE

Masumeh Hasani Tabatabaei; Sakineh Arami; Fatemeh Khajavi; Zohreh Moradi

2017-01-01

Background and Aims: Despite the reduction of incidence of dental caries in recent years, this disease is common and many efforts were conducted to decrease the prevalence of dental caries. On the other hand secondary caries lesions are the main reason for replacement of direct restorations. Therefore, the aim of the current study was to evaluate suitable methods of preparation and restorative materials to reduce caries recurrence. Materials and Methods: In this experimental study, eighty...

Child dental anxiety, parental rearing style and dental history reported by parents.

Science.gov (United States)

Krikken, J B; Vanwijk, A J; Tencate, J M; Veerkamp, J S

2013-12-01

To examine the relationship between self-reported parental rearing style, parent's assessment of their child's dental anxiety and the dental history of children. Parents of primary school children were asked to complete questionnaires about their parenting style, using four different questionnaires. Parents also completed the Child Fear Survey Schedule Dental Subscale (CFSS-DS) on behalf of their child and a questionnaire about the dental history of their child. 454 interview forms were available for analysis. Minor associations were found between dental anxiety and parenting style. Anxious parents were more permissive and less restrictive in their parenting style. Parents of children who did not visit their dentist for regular check-ups reported more laxness and less restrictiveness. Children who had a cavity at the time of investigation, children who had suffered from toothache in the past and children who did not have a nice and friendly dentist reported more dental anxiety. No clear associations between parenting style and dental anxiety were found. Known causes of dental anxiety were confirmed.

Histological evaluation of the rat dental pulp after indirect capping with sildenafil or L-NAME incorporated into a bioadhesive thermoresponsive system

Directory of Open Access Journals (Sweden)

Rogério Rodrigues Cupertino

2016-06-01

Full Text Available We evaluated the histological dental pulp state in vivo after indirect pulp capping using sildenafil or LG-nitro-L-arginine (L-NAME, incorporated into a new bioadhesive thermoresponsive system (BTS. Male Wistar rats were subjected to an upper and lower first molar class I cavity preparation followed by indirect pulp capping with sildenafil or L-NAME. Calcium hydroxide (CaOH2 was used as a control. The teeth and surrounding bone were properly dissected and processed for Nissl’s staining. Pulp state was evaluated considering the morphological aspects of the inflammatory response, type of inflammatory infiltrate, organization of the odontoblast layer, blood vessel condition, and presence of abscesses or necrosis. The results were expressed as average of observations. The most intense inflammatory response was observed 3 days after the cavity preparation. No identified changes were detected in the dental pulp response of the molars treated with L-NAME compared with those treated with CaOH2. A dual effect was observed in the teeth treated with sildenafil. While low sildenafil concentration (0.015% w w-1 promoted effects comparable to CaOH2, at a higher concentration (0.15% w w-1, sildenafil caused a severe inflammatory response and pulp necrosis. This pioneering suggest that NO pathway activity may be a determinant in the process of dental pulp healing.

Developing a flexible core Dental Public Health curriculum for predoctoral dental and dental hygiene schools.

Science.gov (United States)

Atchison, Kathryn; Mascarenhas, Ana Karina; Bhoopathi, Vinodh

2015-01-01

The curriculum for graduating dental and dental hygiene students must prepare them to contribute to the improvement or maintenance of health for individual patient's and the public's health. The objective is to describe the background for and the process used to develop a core Dental Public Health Curriculum for such students. The process used was to solicit and review existing dental public health curriculum in dental and dental hygiene schools; review curriculum for other health professionals; identify the themes needed to frame the curriculum; select usable materials and identify gaps in existing curricular materials; and develop appropriate curriculum materials that would embody the competencies developed for undergraduate dental and dental hygiene education. Twenty-three topics were identified as embodying the eight competencies. Based on these topics, six courses, Principles of Dental Public Health, Evidence-Based Dentistry, Ethics and Dental Public Health, Dental Public Health Policy and Advocacy, Oral Health Promotion and Disease Prevention, and Oral Health Literacy and Dental Public Health, were prepared. Each course includes syllabus, PowerPoint presentations, student assignments and activities, instructor guide, and classroom discussion points. Depending on the hours available in the existing curriculum at the dental or hygiene school, lecture presentations and take home assignments/discussions may be used independently or in combination with presentations from other courses. In addition, individual discussions and activities may be used to integrate dental public health materials into other courses. A flexible curriculum is available at the AAPHD website to enable the incorporation of DPH topics into the curriculum. © 2015 American Association of Public Health Dentistry.

Superconducting TESLA cavities

Directory of Open Access Journals (Sweden)

B. Aune

2000-09-01

Full Text Available The conceptional design of the proposed linear electron-positron collider TESLA is based on 9-cell 1.3 GHz superconducting niobium cavities with an accelerating gradient of E_{acc}≥25 MV/m at a quality factor Q_{0}≥5×10^{9}. The design goal for the cavities of the TESLA Test Facility (TTF linac was set to the more moderate value of E_{acc}≥15 MV/m. In a first series of 27 industrially produced TTF cavities the average gradient at Q_{0}=5×10^{9} was measured to be 20.1±6.2 MV/m, excluding a few cavities suffering from serious fabrication or material defects. In the second production of 24 TTF cavities, additional quality control measures were introduced, in particular, an eddy-current scan to eliminate niobium sheets with foreign material inclusions and stringent prescriptions for carrying out the electron-beam welds. The average gradient of these cavities at Q_{0}=5×10^{9} amounts to 25.0±3.2 MV/m with the exception of one cavity suffering from a weld defect. Hence only a moderate improvement in production and preparation techniques will be needed to meet the ambitious TESLA goal with an adequate safety margin. In this paper we present a detailed description of the design, fabrication, and preparation of the TESLA Test Facility cavities and their associated components and report on cavity performance in test cryostats and with electron beam in the TTF linac. The ongoing research and development towards higher gradients is briefly addressed.

Histopathological study of the effects of low-intensity laser irradiation ({lambda}=650 nm) on dental pulp tissue after cavity preparation; Estudo histopatologico dos efeitos da irradiacao laser em baixa intensidade ({lambda}=650nm) em tecido pulpar apos preparo cavitario

Energy Technology Data Exchange (ETDEWEB)

Bertella, Claudio

2001-07-01

The purpose of this study was to evaluate (in vivo) the effects of low-intensity Arsenide Gallium Aluminium laser application post-cavity preparation class 1. Six patients with bilateral pre-molars and molars indicated to extraction for orthodontics aim were selected. Four samples of these teeth underwent cavity preparation with deep from medium to high and two samples underwent cavity preparation from high to pulp expositions. The samples were constituted of two teeth of the same patient and received different treatments. One of the teeth underwent laser exposition and the other one was maintained as control, before restorative procedure with polycarboxylate cement. A diode laser ({lambda}=650 nm), output power 30 mW and fluencies of 1,8 J/cm{sup 2} and 2,7 J/cm{sup 2} in pre-molars and molars, respectively, was used for irradiation with repetition rate of 18 Hz in interrupted continuous wave mode. After seven days, the teeth were extracted and processed histologically with HE to verify morphological changes in the pulpy tissue. The four samples, which cavity preparation and restorative material were not in contact with the pulp, did not show histological differences between irradiated and non-irradiated teeth. Both of them presented the same characteristics of normality. The two samples with exposed pulpy tissue showed different results. The irradiated teeth presented no or slight inflammatory signs when compared to the control samples, which showed abscess in the coronary pulp interior and intense inflammatory infiltrated. These results suggest that the laser irradiation can be used as a therapeutic modality in clinical trials, in the conditions employed in this study. (author)

Ceramic and polymeric dental onlays evaluated by photo-elasticity, optical coherence tomography, and micro-computed tomography

Science.gov (United States)

Sinescu, Cosmin; Negrutiu, Meda; Topala, Florin; Ionita, Ciprian; Negru, Radu; Fabriky, Mihai; Marcauteanu, Corina; Bradu, Adrian; Dobre, George; Marsavina, Liviu; Rominu, Mihai; Podoleanu, Adrian

2011-10-01

Dental onlays are restorations used to repair rear teeth that have a mild to moderate amount of decay. They can also be used to restore teeth that are cracked or fractured if the damage is not severe enough to require a dental crown. The use of onlays requires less tooth reduction than does the use of metal fillings. This allows dentists to conserve more of a patient's natural tooth structure in the treatment process. The aims of this study are to evaluate the biomechanical comportment of the dental onlays, by using the 3D photo elasticity method and to investigate the integrity of the structures and their fitting to the dental support. For this optical coherence tomography and micro-computed tomography were employed. Both methods were used to investigate 37 dental onlays, 17 integral polymeric and 20 integral ceramic. The results permit to observe materials defects inside the ceramic or polymeric onlays situate in the biomechanically tensioned areas that could lead to fracture of the prosthetic structure. Marginal fitting problems of the onlays related to the teeth preparations were presented in order to observe the possibility of secondary cavities. The resulted images from the optical coherence tomography were verified by the micro-computed tomography. In conclusion, the optical coherence tomography can be used as a clinical method in order to evaluate the integrity of the dental ceramic and polymeric onlays and to investigate the quality of the marginal fitting to the teeth preparations.

Systematic approach to preparing ceramic-glass composites with high translucency for dental restorations.

Science.gov (United States)

Yoshimura, Humberto N; Chimanski, Afonso; Cesar, Paulo F

2015-10-01

Ceramic composites are promising materials for dental restorations. However, it is difficult to prepare highly translucent composites due to the light scattering that occurs in multiphase ceramics. The objective of this work was to verify the effectiveness of a systematic approach in designing specific glass compositions with target properties in order to prepare glass infiltrated ceramic composites with high translucency. First it was necessary to calculate from literature data the viscosity of glass at the infiltration temperature using the SciGlass software. Then, a glass composition was designed for targeted viscosity and refractive index. The glass of the system SiO2-B2O3-Al2O3-La2O3-TiO2 prepared by melting the oxide raw materials was spontaneously infiltrated into porous alumina preforms at 1200°C. The optical properties were evaluated using a refractometer and a spectrophotometer. The absorption and scattering coefficients were calculated using the Kubelka-Munk model. The light transmittance of prepared composite was significantly higher than a commercial ceramic-glass composite, due to the matching of glass and preform refractive indexes which decreased the scattering, and also to the decrease in absorption coefficient. The proposed systematic approach was efficient for development of glass infiltrated ceramic composites with high translucency, which benefits include the better aesthetic performance of the final prosthesis. Copyright © 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Polymer coated liposomes for dental drug delivery--interactions with parotid saliva and dental enamel.

Science.gov (United States)

Nguyen, S; Hiorth, M; Rykke, M; Smistad, G

2013-09-27

The interactions between pectin coated liposomes and parotid saliva and dental enamel were studied to investigate their potential to mimic the protective biofilm formed naturally on tooth surfaces. Different pectin coated liposomes with respect to pectin type (LM-, HM- and AM-pectin) and concentration (0.05% and 0.2%) were prepared. Interactions between the pectin coated liposomes and parotid saliva were studied by turbidimetry and imaging by atomic force microscopy. The liposomes were adsorbed to hydroxyapatite (HA) and human dental enamel using phosphate buffer and parotid saliva as adsorption media. A continuous flow was imposed on the enamel surfaces for various time intervals to examine their retention on the dental enamel. The results were compared to uncoated, charged liposomes. No aggregation tendencies for the pectin coated liposomes and parotid saliva were revealed. This makes them promising as drug delivery systems to be used in the oral cavity. In phosphate buffer the adsorption to HA of pectin coated liposomes was significantly lower than the negative liposomes. The difference diminished in parotid saliva. Positive liposomes adsorbed better to the dental enamel than the pectin coated liposomes. However, when subjected to flow for 1h, no significant differences in the retention levels on the enamel were found between the formulations. For all formulations, more than 40% of the liposomes still remained on the enamel surfaces. At time point 20 min the retention of HM-pectin coated and positive liposomes were significantly higher. It was concluded that pectin coated liposomes can adsorb to HA as well as to the dental enamel. Their ability to retain on the enamel surfaces promotes the concept of using them as protective structures for the teeth. Copyright © 2013 Elsevier B.V. All rights reserved.

Exploring Current and Future Roles of Non-Dental Professionals: Implications for Dental Hygiene Education.

Science.gov (United States)

Maxey, Hannah L; Farrell, Christine; Gwozdek, Anne

2017-09-01

The health care system is undergoing transformation in which oral health is not only valued as an aspect of overall health, but health care delivery systems are aligning to better deliver total patient care. As a result of this transformation, education for many non-dental professionals incorporates oral health content to prepare them to practice in comprehensive delivery models. While some non-dental professionals already incorporate oral health care in their service, many opportunities exist for expansion of oral health care delivery by other non-dental professionals, including radiologic technicians, nursing staff, and human services professionals. As non-dental professionals take on expanded roles in oral health care, the dental hygiene workforce must be prepared to practice in settings with new types of professionals. Dental hygiene curricula should prioritize interprofessional education to best prepare these students for practice in evolved delivery models. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Canine oral cavity neoplasias - Brief review

Directory of Open Access Journals (Sweden)

João Filipe Requicha

2015-03-01

Full Text Available ABSTRACT. Requicha J.F., Pires M. dos A., Albuquerque C.M. & Viegas C.A. [Canine oral cavity neoplasias - Brief review.] Neoplasias da cavidade oral do cão - Breve revisão. Revista Brasileira de Medicina Veterinária, 37(1:41-46, 2015. Faculdade de Medicina Veterinária, Universidade Lusófona de Humanidades e Tecnologias, Campo Grande, 1749-024 Lisboa, Portugal e Department of Veterinary Sciences, School of Agriculture and Veterinary Sciences, University of Trás-os-Montes e Alto Douro, P.O. Box 1013, 5001-801 Vila Real, Portugal. E-mail: jfrequicha@gmail.com Oral proliferative lesions are relatively common in domestic carnivores but, fortunately, a lot of these lesions are benign. The oral cavity is place of 6% of all tumours in dogs, being the sixth most important localization of neoplasias in this specie. The non-odontogenic tumors arise from structures of the oral cavity, except from dental tissue, and they are mostly malignant. Odontogenic tumors are those originated from the dental structures. In the case of tumors of non-odontogenic, will be described the oral papillomatosis, the melanoma, the squamous cell carcinoma, and the fibrosarcoma. Among the odontogenic tumors, the focus will be on the epulides, ameloblastoma, odontoma and dentigerous cysts.

Standards of teeth preparations for anterior resin bonded all-ceramic crowns in private dental practice in Jordan

Directory of Open Access Journals (Sweden)

Ziad Nawaf AL-Dwairi

2011-08-01

Full Text Available OBJECTIVES: To investigate if general dental practitioners (GDPs in private practice in Jordan follow universal guidelines for preparation of anterior teeth for resin bonded all-ceramic crowns (RBCs. MATERIAL AND METHODS: A sample (n=100 of laboratory models containing 208 tooth preparations for IPS Empress and In Ceram, featuring work from different GDPs, was obtained from 8 commercial dental laboratories. Aspects of preparations were quantified and compared with accepted criteria defined following a review of the literature and recommendations of the manufactures' guidelines. RESULTS: Subgingival margins on the buccal aspect were noticed in 36% of the preparations, 54% demonstrated overpreparation with a tendency to overprepare the teeth on the mesiodistal plane more than buccolingual plane. Twenty percent of samples presented a shoulder finish line while a chamfer margin design was noticed in 39%. Twenty-nine percent and 12% of samples had either a feathered or no clear margin design respectively. Incisal underpreparation was observed in 18% of dies of each type. Only 17% of all preparations were found to follow the recommended anatomical labial preparations while 29% of the RBC preparations were found to have the recommended axial convergence angle. In total, 43% of preparations were found to have the recommended depth of the finish line. CONCLUSIONS: It was found that relevant guidelines for RBC preparations were not being fully adhered to in private practice in Jordan.

Creation of a scholars program in dental leadership (SPDL) for dental and dental hygiene students.

Science.gov (United States)

Taichman, Russell S; Green, Thomas G; Polverini, Peter J

2009-10-01

There is a great need for leaders in the dental profession. As technological advances make our world smaller and our lives faster and more complex, we as a profession face challenges and opportunities that are evolving. Many of the changes in the scope and mode of practice will require new and different approaches. Meeting these challenges will require changes in how we as dental professionals do business; interact with our patients, other stakeholders, and health care providers; and educate our future colleagues. The purposeful incorporation of leadership education into dental and dental hygiene curricula represents an important departure from existing paradigms-but will help prepare our students to address these challenges. This article provides an overview of the development of a Scholars Program in Dental Leadership (SPDL) at the University of Michigan School of Dentistry. Our aim for the program is to create a learning environment that fosters leadership development, so that students are prepared and motivated to assume leadership positions in the profession and their communities.

Educational Outcomes of Small-Group Discussion Versus Traditional Lecture Format in Dental Students' Learning and Skills Acquisition.

Science.gov (United States)

Arias, Ana; Scott, Raymond; Peters, Ove A; McClain, Elizabeth; Gluskin, Alan H

2016-04-01

The aim of this prospective quantitative study was to compare the effect of different instructional formats on dental students' skills and knowledge acquisition for access cavity preparation. All first-year dental students were invited to participate in this study conducted during the four consecutive two-week endodontic rotation courses at the University of the Pacific Arthur A. Dugoni School of Dentistry in spring semester 2015. Four alphabetically distributed intact groups of students were randomly allocated to two groups (n=70 each) that participated in either small-group discussion or a traditional lecture on access preparation. The first outcome measure was skill acquisition, measured by the quality of access cavities prepared in extracted teeth at the conclusion of the session. Two blinded raters scored direct observations on a continuous scale. Knowledge, the second outcome measure, was scored with a multiple-choice and open-ended question test at the end of each two-week session. Data were obtained for 134 of the 140 students, for a 96% response rate. The results showed that students in the small-group discussion groups scored significantly higher than those in the lecture groups when skill performance was tested (p=8.9 × 10(-7)). However, no significant differences were found in the acquisition of knowledge between the two groups on the written test. Active student participation was significantly related to improved manual skill acquisition, but the format of the session does not seem to have had a direct influence on acquired knowledge.

Marginal microleakage in vitro study on class V cavities prepared with Er:YAG laser and etched with acid or etched with Er:YAG laser and acid; Estudo in vitro da microinfiltracao marginal em cavidades classe V preparadas com laser de Er:YAG e condicionadas com acido ou com laser de Er:YAG e acido

Energy Technology Data Exchange (ETDEWEB)

Tavares, Henrique Dutra Simoes

2001-07-01

Microleakage at the interface between the teeth and the restorative materials remains a problem with composite resin restorations. Microleakage at the gingival margins of class V cavities restorations still challenge as they are usually placed in dentin and/or cementum. Previous studies have shown that the cavity preparation with Er:YAG laser is possible. It has been reported that Er:YAG laser has ability to create irregular surface providing micromechanical retention for adhesive dental restorative materials and to improve marginal sealing. The purpose of this in vitro study was to evaluate the marginal microleakage on class V cavities prepared with Er:YAG laser and etched with acid or with Er:YAG laser and acid, in compared to those prepared and etched conventionally. Thirty human molars were divided into three groups, namely: group I - prepared with Er:YAG laser (KaVo KEY Laser II - Germany) and etched with 37% phosphoric acid; group II - prepared with Er:YAG laser and etched with Er:YAG laser and 37% phosphoric acid; group III (control group) - prepared with high speed drill and etched with 37% phosphoric acid. All cavities were treated with same adhesive system (Single Bond - 3M) and restored with the composite resin (Z100 - 3M), according to the manufacturer's instructions. The specimens were stored at 37 deg C in water for 24 hours, polished with Sof-Lex discs (3M), thermally stressed, sealed with a nail polish coating except for the area of the restoration and 1 mm around it, and immersed in a 50% aqueous solution of silver nitrate for 24 hours. After that, the specimens were rinsed in water, soaked in a photodeveloping solution and exposed to a fluorescent light for 8 hours. The teeth were embedded in an autopolymerizing resin and sectioned longitudinally using a diamond saw microtome under running water. The sections were photographed. The microleakage at the occlusal cavity and at the gingival margins of each specimen was evaluated with scores (0-3) by

Marginal microleakage in vitro study on class V cavities prepared with Er:YAG laser and etched with acid or etched with Er:YAG laser and acid; Estudo in vitro da microinfiltracao marginal em cavidades classe V preparadas com laser de Er:YAG e condicionadas com acido ou com laser de Er:YAG e acido

Energy Technology Data Exchange (ETDEWEB)

Tavares, Henrique Dutra Simoes

2001-07-01

Microleakage at the interface between the teeth and the restorative materials remains a problem with composite resin restorations. Microleakage at the gingival margins of class V cavities restorations still challenge as they are usually placed in dentin and/or cementum. Previous studies have shown that the cavity preparation with Er:YAG laser is possible. It has been reported that Er:YAG laser has ability to create irregular surface providing micromechanical retention for adhesive dental restorative materials and to improve marginal sealing. The purpose of this in vitro study was to evaluate the marginal microleakage on class V cavities prepared with Er:YAG laser and etched with acid or with Er:YAG laser and acid, in compared to those prepared and etched conventionally. Thirty human molars were divided into three groups, namely: group I - prepared with Er:YAG laser (KaVo KEY Laser II - Germany) and etched with 37% phosphoric acid; group II - prepared with Er:YAG laser and etched with Er:YAG laser and 37% phosphoric acid; group III (control group) - prepared with high speed drill and etched with 37% phosphoric acid. All cavities were treated with same adhesive system (Single Bond - 3M) and restored with the composite resin (Z100 - 3M), according to the manufacturer's instructions. The specimens were stored at 37 deg C in water for 24 hours, polished with Sof-Lex discs (3M), thermally stressed, sealed with a nail polish coating except for the area of the restoration and 1 mm around it, and immersed in a 50% aqueous solution of silver nitrate for 24 hours. After that, the specimens were rinsed in water, soaked in a photodeveloping solution and exposed to a fluorescent light for 8 hours. The teeth were embedded in an autopolymerizing resin and sectioned longitudinally using a diamond saw microtome under running water. The sections were photographed. The microleakage at the occlusal cavity and at the gingival margins of each specimen was evaluated with scores (0

Preparation of Greenberger-Horne-Zeilinger entangled states with multiple superconducting quantum-interference device qubits or atoms in cavity QED

International Nuclear Information System (INIS)

Yang Chuiping; Han Siyuan

2004-01-01

A scheme is proposed for generating Greenberger-Horne-Zeilinger (GHZ) entangled states of multiple superconducting quantum-interference device (SQUID) qubits by the use of a microwave cavity. The scheme operates essentially by creating a single photon through an auxiliary SQUID built in the cavity and performing a joint multiqubit phase shift with assistance of the cavity photon. It is shown that entanglement can be generated using this method, deterministic and independent of the number of SQUID qubits. In addition, we show that the present method can be applied to preparing many atoms in a GHZ entangled state, with tolerance to energy relaxation during the operation

Radioisotopes in the study of the adaptation of dental amalgam fillings

International Nuclear Information System (INIS)

Bermawi, A.

1995-02-01

Adaptation expresses the significance of the relationship between the dental filling and its cavity, and forms a special challenge for the dentist when he performs dental restorative procedures. Therefore, I have done a study on the adaptation of dental amalgam fillings and their marginal leakage using radioactive iodine (I sup 1 sup 3 sup 1) and radioactive carbon (C sup 1 sup 4) on three alloys: Viva cap-Contour-Sybraloy. Marginal leakage has been established by the use of I sup 1 sup 3 sup 1, and the leakage points located by C sup 1 sup 4, by means of radioautography. This study was carried out on: - 45 dental specimens to examine marginal leakage. - 9 dental specimens to examine the time of leakage as it reached the occlusal surface. - 6 dental specimens to examine the effect of lining the cavity walls with NO sup 3 Ag varnish on marginal leakage. - 5 dental specimens to examine the effect of form (bevel) of pulpal axial point angle on marginal leakage. - 3 dental specimens as controls. - 25 dental specimens for radioautography, and to determine leakage points. The following results were observed: - Leakage occurred around the contours of all fillings under study, and spread from their basal parts to the angle of their occlusal margin. - Quantitative increase of leakage with time. - The type of the alloy played an active role in determining the pattern of leakage. - Metallic amalgam alloys with spheroidal regular atoms showed the least leakage. - The occlusal sulci exhibited more leakage than the other parts. - Beveling the pulpal axial point angle decreased leakage. - Lining the cavity walls with NO sup 3 Ag varnish inhibited leakage. - The radioactive element, to which the specimens were exposed, was unable to infiltrated and penetrate dentinal and enamel tissues. (author). 55 refs, 52 figs., 68 tabs

Radioisotopes in the study of the adaptation of dental amalgam fillings

Energy Technology Data Exchange (ETDEWEB)

Bermawi, A [Atomic Energy Commission, Damascus (Syrian Arab Republic). Dept. of Radiation Protection and Nuclear Safety

1995-02-01

Adaptation expresses the significance of the relationship between the dental filling and its cavity, and forms a special challenge for the dentist when he performs dental restorative procedures. Therefore, I have done a study on the adaptation of dental amalgam fillings and their marginal leakage using radioactive iodine (I sup 1 sup 3 sup 1) and radioactive carbon (C sup 1 sup 4) on three alloys: Viva cap-Contour-Sybraloy. Marginal leakage has been established by the use of I sup 1 sup 3 sup 1, and the leakage points located by C sup 1 sup 4, by means of radioautography. This study was carried out on: - 45 dental specimens to examine marginal leakage. - 9 dental specimens to examine the time of leakage as it reached the occlusal surface. - 6 dental specimens to examine the effect of lining the cavity walls with NO sup 3 Ag varnish on marginal leakage. - 5 dental specimens to examine the effect of form (bevel) of pulpal axial point angle on marginal leakage. - 3 dental specimens as controls. - 25 dental specimens for radioautography, and to determine leakage points. The following results were observed: - Leakage occurred around the contours of all fillings under study, and spread from their basal parts to the angle of their occlusal margin. - Quantitative increase of leakage with time. - The type of the alloy played an active role in determining the pattern of leakage. - Metallic amalgam alloys with spheroidal regular atoms showed the least leakage. - The occlusal sulci exhibited more leakage than the other parts. - Beveling the pulpal axial point angle decreased leakage. - Lining the cavity walls with NO sup 3 Ag varnish inhibited leakage. - The radioactive element, to which the specimens were exposed, was unable to infiltrated and penetrate dentinal and enamel tissues. (author). 55 refs, 52 figs., 68 tabs.

Cavity Preparation/assembly Techniques and Impact on Q, Realistic Q - Factors in a Module, Review of Modules

Energy Technology Data Exchange (ETDEWEB)

Peter Kneisel

2005-03-19

This contribution summarizes the surface preparation procedures for niobium cavities presently used both in laboratory experiments and for modules, such as buffered chemical polishing (BCP), electropolishing (EP), high pressure ultrapure water rinsing (HPR), CO{sub 2} snow cleaning and high temperature heat treatments for hydrogen degassing or postpurification. The impact of surface treatments and the degree of cleanliness during assembly procedures on cavity performance (Q - value and accelerating gradient E{sub acc}) will be discussed. In addition, an attempt will be made to summarize the experiences made in module assemblies in different labs/projects such as DESY(TTF), Jlab (Upgrade) and SNS.

Morphological evaluation of cavity preparation surface after duraphat and Er:YAG laser treatment by scanning electronic microscopy; Avaliacao das alteracoes morfologicas da superficie do preparo cavitario apos condicionamento com verniz fluoretado a 2,26 % e laser de Er:YAG atraves de microscopia eletronica de varredura

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Luciane Borelli

2002-07-01

The treatment of dental surface using different lasers to prevent dental caries has been studied for several on last years. The purpose of this in vitro study was to evaluate the morphological changes on dentin surface from pulpal wall of cavity preparations performed by high-speed drill, treated with 2,26% fluoride varnish (Duraphat) and Er:YAG laser, and then submitted after receiving or not to EDTA 15% treatment. Twenty Class V cavities were performed on ten humans molars. The specimens were randomly divided in to 4 groups: group 1- treatment with Duraphat followed by Er:YAG laser irradiation (120 mJ/ 4 Hz); group 2: Er:YAG laser irradiation, same parameters, followed by Duraphat treatment; group 3- same group 1 followed by immersion in EDTA (5 min); group 4 - same as group 2 followed by immersion in EDTA (5 min). The specimens were processed for SEM analysis. The micrographs showed that Duraphat treatment promoted morphological changes on dentin, closing dentinal tubules; the specimens treated by Duraphat and Er:YAG laser and immersed in EDTA (group 3) showed homogeneous surface, closed and protected dentinal tubules, maintenance of the fluoride varnish on the dentin surface and around the dentinal tubules, showing feasible and efficiency of these therapies the feasibility.(author)

Endodontic treatment of dens evaginatus by performing a splint guided access cavity.

Science.gov (United States)

Mena-Álvarez, Jesús; Rico-Romano, Cristina; Lobo-Galindo, Ana Belén; Zubizarreta-Macho, Álvaro

2017-11-12

Dens evaginatus (DE) is described as an unusual dental malformation. Tooth structure variations attached to this anatomical disturbance complicates the performance of a conservative access cavity for a conventional root canal treatment. Author's purpose is to describe the treatment of a type V DE by using splits as guides to perform access cavity. This clinical case shows a root canal treatment of a type V DE diagnosed by using a cone beam computed tomography (CBCT). Access cavity was planned through an osseointegrated implant planning software and guided by a stereolithographied split. After endodontic treatment, tooth was sculpted for placing a veneer, processed by a chair-side system in a single session. CBCT is an effective method for obtaining internal anatomical information of teeth with anatomical malformations. The osseointegrated implant planning software is an effective method for planning root canal treatment and designing stereolithograped splits (for performing minimally invasive access cavities). Stereolithographed splints allow performing a guided and conservative access cavity of teeth affected by dental malformations whereas digital technology allows us to esthetically reconstruct a tooth in a single session. © 2017 Wiley Periodicals, Inc.

The effect of gingival wall location on the marginal seal of class ii restorations prepared with a flowable bulk-fill resin-based composite.

Science.gov (United States)

Segal, P; Candotto, V; Ben-Amar, A; Eger, M; Matalon, S; Lauritano, D; Ormianer, Z

2018-01-01

SureFil SDR is a flowable resin-based composite that allows a single incremental bulk placement. The marginal seal of SureFil SDR at the gingival margins of class II restorations located apical to the cemento-enamel-junction (CEJ) has not been adequately evaluated compared to those located occlusal to the CEJ. Forty class II cavities were prepared in human molars. The gingival margins of 20 preparations were located 0.5 mm occlusal to the CEJ, and the other 20 preparations were located 0.5 mm apical to the CEJ. The cavities surfaces were bonded with XenoV dental adhesive and filled with SDR in one bulk increment up to 4 mm, after which they were covered with CeramX. The teeth were subjected to thermo-and load-cycling, and their gingival margins were exposed to 0.5% basic-fuchsin solution. The specimens were sectioned mesio-distally and scored for microleakage. A Wilcoxon test for pairwise comparison was performed to determine significance. Dye penetration was observed in 30% of the 20 restorations with cavo-surface margins located occlusal to the CEJ and in 55% of the 20 restorations with cavo-surface margins located apical to the CEJ. The bulk-fill flowable resin base SureFil SDR with XenoV dental adhesive provided a better marginal seal in class II restorations with gingival margins above the CEJ compared to restorations with gingival margins below the CEJ. SDR should not be recommended for class II cavity preparations with gingival margins located below the CEJ.

Mucoadhesive electrospun chitosan-based nanofibre mats for dental caries prevention.

Science.gov (United States)

Samprasit, Wipada; Kaomongkolgit, Ruchadaporn; Sukma, Monrudee; Rojanarata, Theerasak; Ngawhirunpat, Tanasait; Opanasopit, Praneet

2015-03-06

The mucoadhesive electrospun nanofibre mats were developed using chitosan (CS) and thiolated chitosan (CS-SH) as mucoadhesive polymers. Garcinia mangostana (GM) extract was incorporated into nanofibre mats. The antibacterial activity in the single and combined agents was evaluated against dental caries pathogens. The morphology of mats was observed using SEM. The mats were evaluated for GM extract amount, mucoadhesion, in vitro release, antibacterial activity and cytotoxicity. The mucoadhesion and antibacterial activity were determined in healthy human volunteers. The prepared mats were in nanoscale with good physical and mucoadhesive properties. The CS-SH caused the higher mucoadhesion. All mats rapidly released active substances, which had the synergistic antibacterial activity. In addition, the reduction of bacteria and good mucoadhesion in the oral cavity occurred without cytotoxicity. The results suggest that mats have the potential to be mucoadhesive dosage forms to maintain oral hygiene by reducing the bacterial growth that causes the dental caries. Copyright © 2014 Elsevier Ltd. All rights reserved.

Evidence-based concepts and procedures for bonded inlays and onlays. Part II. Guidelines for cavity preparation and restoration fabrication.

Science.gov (United States)

Rocca, Giovanni Tommaso; Rizcalla, Nicolas; Krejci, Ivo; Dietschi, Didier

2015-01-01

The second part of this article series presents an evidence-based update of clinical protocols and procedures for cavity preparation and restoration selection for bonded inlays and onlays. More than ever, tissue conservation dictates preparation concepts, even though some minimal dimensions still have to be considered for all restorative materials. In cases of severe bruxism or tooth fragilization, CAD/CAM composite resins or pressed CAD/CAM lithium disilicate glass ceramics are often recommended, although this choice relies mainly on scarce in vitro research as there is still a lack of medium- to long-term clinical evidence. The decision about whether or not to cover a cusp can only be made after a multifactorial analysis, which includes cavity dimensions and the resulting tooth biomechanical status, as well as occlusal and esthetic factors. The clinical impact of the modern treatment concepts that were outlined in the previous article - Dual Bonding (DB)/Immediate Dentin Sealing (IDS), Cavity Design Optimization (CDO), and Cervical Margins Relocation (CMR) - are described in detail in this article and discussed in light of existing clinical and scientific evidence for simpler, more predictable, and more durable results. Despite the wide choice of restorative materials (composite resin or ceramic) and techniques (classical or CAD/CAM), the cavity for an indirect restoration should meet five objective criteria before the impression.

Dental hard tissue characterization using laser-based ultrasonics

Science.gov (United States)

Blodgett, David W.; Massey, Ward L.

2003-07-01

Dental health care and research workers require a means of imaging the structures within teeth in vivo. One critical need is the detection of tooth decay in its early stages. If decay can be detected early enough, the process can be monitored and interventional procedures, such as fluoride washes and controlled diet, can be initiated to help re-mineralize the tooth. Currently employed x-ray imaging is limited in its ability to visualize interfaces and incapable of detecting decay at a stage early enough to avoid invasive cavity preparation followed by a restoration. To this end, non-destructive and non-contact in vitro measurements on extracted human molars using laser-based ultrasonics are presented. Broadband ultrasonic waves are excited in the extracted sections by using a pulsed carbon-dioxide (CO2) laser operating in a region of high optical absorption in the dental hard tissues. Optical interferometric detection of the ultrasonic wave surface displacements in accomplished with a path-stabilized Michelson-type interferometer. Results for bulk and surface in-vitro characterization of caries are presented on extracted molars with pre-existing caries.

The virtual dental home: a critique.

Science.gov (United States)

Friedman, Jay W; Nash, David A; Mathu-Muju, Kavita R

2017-09-01

The Virtual Dental Home is a concept of the Pacific Center for Special Care of the Arthur A. Dugoni School of Dentistry in San Francisco. It is designed to improve access to dental care for underserved populations, specifically children and institutionalized adults. This article describes the development and implementation of the Virtual Dental Home, subsequently critiquing the concept. The criteria for a dental home are not met by the program. It is the equivalent of a traditional public oral health prevention and screening program, with the additional dimension of allowing dental hygienists and assistants to place interim glass ionomer restorations in dental cavities. The critique questions the need to insert a "cloud" dentist into the process. The routine utilization of radiographs is also challenged. The VDH not only lacks the attributes of a dental home, it has not been shown to be as efficient and effective as traditional programs staffed by dental hygienists and dental therapists. The article concludes by describing how programs utilizing dental therapists could address the deficiencies of the Virtual Dental Home, effectively improving access to oral health care for underserved populations. © 2017 American Association of Public Health Dentistry.

Barodontalgias, dental and orofacial barotraumas: a survey in Swiss divers and caisson workers.

Science.gov (United States)

Zanotta, Cristina; Dagassan-Berndt, Dorothea; Nussberger, Peter; Waltimo, Tuomas; Filippi, Andreas

2014-01-01

Changing ambient pressure can lead to medical conditions in body cavities filled with air. Intraoral pain elicited by changes in pressure is referred to as barodontalgia. Dental barotraumas are defined as pressure-induced damages of teeth and restorations. The pathophysiologic background so far is not completely clear. The present study deals with dental and orofacial symptoms which can occur as a result of pressure variations. With the aid of cantonal administrations, diving associations, and tunnel construction firms, 520 pressure-exposed individuals (499 scuba/ professional divers, 21 caisson workers operating at excess pressure) were questioned regarding dental problems. A personal interview was conducted with affected individuals. Problems in the dental area were experienced by 15% of all respondents. Toothaches were suffered by 10.2% of the participants. Tooth injuries occurred in 6.3% of all interviewees (26 fractured amalgam restorations, 4 crown fractures, 3 losses of tooth fragments). A proportion of 11.3% among the respondents complained about temporomandibular joint problems or mucosal irritations (for example aphthae) related to the mouthpieces. Barotraumas outside the dental area were incurred by 31.9% of the divers. Of these, 69.9% concerned the ears and 65.6% occurred during the descent. Based on the results obtained from the survey and taking into account the current literature, recommendations for the prevention of barotraumas in divers and caisson workers were prepared. Diagnostic exclusion of dental pathologies and avoidance of retentive reconstruction materials are important factors for the prevention of barodontalgias and dental barotraumas.

Decoronation followed by dental implants placement: fundamentals, applications and explanations

Science.gov (United States)

Consolaro, Alberto; Ribeiro, Paulo Domingos; Cardoso, Maurício A.; Miranda, Dario A. Oliveira; Salfatis, Monica

2018-01-01

ABSTRACT Dental arches areas with teeth presenting dentoalveolar ankylosis and replacement root resorption can be considered as presenting normal bone, in full physiological remodeling process; and osseointegrated implants can be successfully placed. Bone remodeling will promote osseointegration, regardless of presenting ankylosis and/or replacement root resorption. After 1 to 10 years, all dental tissues will have been replaced by bone. The site, angulation and ideal positioning in the space to place the implant should be dictated exclusively by the clinical convenience, associated with previous planning. One of the advantages of decoronation followed by dental implants placement in ankylosed teeth with replacement resorption is the maintenance of bone volume in the region, both vertical and horizontal. If possible, the buccal part of the root, even if thin, should be preserved in the preparation of the cavity for the implant, as this will maintain gingival tissues looking fully normal for long periods. In the selection of cases for decoronation, the absence of microbial contamination in the region - represented by chronic periapical lesions, presence of fistula, old unconsolidated root fractures and active advanced periodontal disease - is important. Such situations are contraindications to decoronation. However, the occurrence of dentoalveolar ankylosis and replacement resorption without contamination should neither change the planning for implant installation, nor the criteria for choosing the type and brand of dental implant to be used. Failure to decoronate and use dental implants has never been reported. PMID:29791693

18F-FDG accumulation in the oral cavity is associated with periodontal disease and apical periodontitis. An initial demonstration on PET/CT

International Nuclear Information System (INIS)

Shimamoto, Hiroaki; Kakimoto, Naoya; Murakami, Shumei; Furukawa, Souhei; Tatsumi, Mitsuaki; Shimosegawa, Eku; Hatazawa, Jun; Hamada, Seiki

2008-01-01

The objective of this study was to prospectively investigate the relationship between high accumulation of 2-deoxy-2-[ 18 F] fluoro-D-glucose (FDG) in the oral cavity and dental infections on positron emission tomography/computed tomography (PET/CT). FDG-PET/CT scans of 103 patients who underwent a health screening were evaluated. The dental examination was performed prior to each PET/CT scan, and dental infections were assessed. Dental infections were classified into six blocks. The severity of dental caries was classified into five grades, and periodontal disease and apical periodontitis were classified into three grades. Two radiologists classified the PET images in the same manner as the dental examination. They evaluated the intensity of FDG uptake by a four-point visual PET image score for each block. The comparison of the dental examination, as a gold standard, and the visual PET image score was performed on a patient or block basis. On a patient-based analysis, 21 of 103 patients (20.4%) showed PET positive findings in the oral cavity; 18 of the 21 patients (85.7%) had dental infections. On a block-based analysis, 25 of 605 blocks (4.1%) showed PET positive findings in the oral cavity; 22 of the 25 blocks (88.0%) had dental infections. On a detailed block-based analysis, a significant difference was observed between the presence of periodontal disease, or apical periodontitis and the positivity of the visual PET image findings (P<0.01). Their severity correlated with the visual PET image score (P<0.05). Periodontal disease or apical periodontitis, but not dental caries, caused FDG accumulation in the oral cavity. This finding should be taken into account when a head and neck FDG-PET study is interpreted. (author)

Six Degree-of-Freedom Haptic Simulation of Probing Dental Caries Within a Narrow Oral Cavity.

Science.gov (United States)

Wang, Dangxiao; Zhao, Xiaohan; Shi, Youjiao; Zhang, Yuru; Hou, Jianxia; Xiao, Jing

2016-01-01

Haptic simulation of handling pathological tissues is a crucial component to enhance virtual surgical training systems. In this paper, we introduce a configuration-based optimization approach to simulate the exploration and diagnosis of carious tissues in dental operations. To simulate the six Degree-of-Freedom (6DoF) haptic interaction between the dental probe and the oral tissues, we introduce two interaction states, the sliding state and the penetration state, which simulate the exploration on the surface of and inside of the caries, respectively. Penetration criteria considering a contact force threshold are defined to trigger the switch between the two states. By utilizing a simplified friction model based on the optimization approach, various multi-region frictional contacts between the probe and carious tissues are simulated. To simulate the exploration within the carious tissues for diagnosing the depth of the caries, a dynamic sphere tree is used to constrain the insertion/extraction of the probe within carious tissues along a fixed direction while enabling simulation of additional contacts of the probe with neighboring oral tissues during the insertion/extraction process. Experimental results show that decays with different levels of stiffness and friction coefficients can be stably simulated. Preliminary user studies show that users could easily identify the invisible boundary between the decay and healthy tissues and correctly rank the depth of target decays within a required time limit. The proposed approach could be used for training delicate motor skill of probing target carious teeth in a narrow oral cavity, which requires collaborated control of tool posture and insertion/extraction force, while avoiding damages to adjacent healthy tissues of the tongue and gingiva.

[Lasers in dentistry. Part B--Interaction with biological tissues and the effect on the soft tissues of the oral cavity, the hard tissues of the tooth and the dental pulp].

Science.gov (United States)

Moshonov, J; Stabholz, A; Leopold, Y; Rosenberg, I; Stabholz, A

2001-10-01

. Histologically, after laser ablation, presence of odontoblastic nuclei is important. Consistency and composition of the intracellular tissue is another factor influencing cell viability. If heat is intensive and exists for an extended time, the consistency of the intracellular ground substance may not be preserved. Accordingly, the application of excessive energy densities has been shown to result in significant damage to pulp tissue and in particular to odontoblasts. Studies showed that the use of Er:YAG laser to treat dental hard tissues is both safe and effective for caries removal, cavity preparation and enamel etching.

Evaluation of the permeability and morphological alteration of the dental surface after apicoectomy, treatment and preparation with Er:YAG and Nd:YAG lasers; Avaliacao da permeabilidade e da alteracao morfologica da superficie dentinaria apos apicectomia, tratamento e retropreparo com os lasers de Er:YAG e Nd:YAG

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Rodrigo Guerra de

2001-07-01

One of the objectives of endodontic treatment is to resolve pathological periapical processes caused by microbial contamination of the dental pulp. Correct execution of the necessary chemical preparation prior to surgery generally results in positive outcomes. However, a percentage of cases do not respond favorably and therefore require retreatment, a conservative therapeutic option. There are meanwhile a number of treatment failures which do not respond to these conservative measures and must therefore be subjected to paraendodontic surgical procedures. One of the principal problems of this therapeutic conduct is linked to the surface permeability of the dentin after apicoectomy and the lack of adequate marginal adaptation between the retrofilling material and the cavity walls. This permits the percolation of microorganisms and their metabolic by products from the system of root canals to the periapical region, thereby compromising the necessary tissue repair. The present work proposes the evaluation of the surface and marginal permeability of cut dentin after apicoectomy and treatment with Er:YAG and Nd:YAG lasers with fiber optics and then retrofilled with intermediate restorative material (IRM). A total of 24 single rooted teeth whose canals were endodontically treated were divided into 3 experimental groups: group I, whose apices were sectioned with an Er:YAG laser and the resulting cavity and the cut dental surface were irradiated with this laser via a 50/10 type fiber; in group II the apicoectomy was conducted with an Er:YAG laser and the resulting cavity and the cut surface were irradiated with a Nd:YAG laser; in group III, the samples were apicoectomized and the cavities were treated with a high speed bur (control group). Analysis of the infiltration of the dye methylene blue throughout the cut dental surface and the reconstruction demonstrated that the samples in the irradiated groups presented lower indices of infiltration than the control group. The

Preparation Methods for Improving PEEK’s Bioactivity for Orthopedic and Dental Application: A Review

Directory of Open Access Journals (Sweden)

Davood Almasi

2016-01-01

Full Text Available There is an increased interest in the use of polyether ether ketone (PEEK for orthopedic and dental implant applications due to its elastic modulus close to that of bone, biocompatibility, and its radiolucent properties. However, PEEK is still categorized as bioinert due to its low integration with surrounding tissues. Many studies have reported on methods to increase the bioactivity of PEEK, but there is still one-preparation method for preparing bioactive PEEK implant where the produced implant with desirable mechanical and bioactivity properties is required. The aim of this review is to present the progress of the preparation methods for improvement of the bioactivity of PEEK and to discuss the strengths and weaknesses of the existing methods.

Betel nut chewing and its deleterious effects on oral cavity

Directory of Open Access Journals (Sweden)

Richa Anand

2014-01-01

Full Text Available The habit of chewing betel nut has a long history of use. Betel nut and products derived from it are widely used as a masticatory product among various communities and in several countries across the world. Over a long period, several additives have been added to a simple betel nut preparation; thus, creating the betel quid (BQ and encompassing chewing tobacco in the preparation. Betel nut has deleterious effects on oral soft tissues. Its effects on dental caries and periodontal diseases, two major oral diseases are less well-documented. Betel-induced lichenoid lesions mainly on buccal mucosa have been reported at quid retained sites. In chronic chewers, a condition called betel chewers mucosa is often found where the quid is placed. Betel nut chewing is implicated in oral submucous fibrosis (OSF and its use along with tobacco can cause leukoplakia, both of which are potentially malignant in the oral cavity. Oral cancer often arises from such precancerous changes. Thus, public health measures to quit betel use are recommended to control disabling conditions such as OSF and oral cancer.

Betel nut chewing and its deleterious effects on oral cavity.

Science.gov (United States)

Anand, Richa; Dhingra, Chandan; Prasad, Sumanth; Menon, Ipseeta

2014-01-01

The habit of chewing betel nut has a long history of use. Betel nut and products derived from it are widely used as a masticatory product among various communities and in several countries across the world. Over a long period, several additives have been added to a simple betel nut preparation; thus, creating the betel quid (BQ) and encompassing chewing tobacco in the preparation. Betel nut has deleterious effects on oral soft tissues. Its effects on dental caries and periodontal diseases, two major oral diseases are less well-documented. Betel-induced lichenoid lesions mainly on buccal mucosa have been reported at quid retained sites. In chronic chewers, a condition called betel chewers mucosa is often found where the quid is placed. Betel nut chewing is implicated in oral submucous fibrosis (OSF) and its use along with tobacco can cause leukoplakia, both of which are potentially malignant in the oral cavity. Oral cancer often arises from such precancerous changes. Thus, public health measures to quit betel use are recommended to control disabling conditions such as OSF and oral cancer.

Sedative effect of oral diazepam and chloral hydrate in the dental treatment of children

Directory of Open Access Journals (Sweden)

Kantovitz Kamila

2007-06-01

Full Text Available Purpose : The purpose was to evaluate two sedation protocols during dental sessions in anxious children. Materials and Methods : It was a randomized and double-blind study, with each individual being his/her own control within each protocol. Furthermore, the two protocols were compared. Twenty children (36 to 84 months old who exhibited "definitely negative" behavior according to the Frankl scale were assigned to receive oral chloral hydrate (40 mg/kg (Group I or Diazepamβ (5 mg (Group II. Behavior during local anesthesia, application of rubber dam, cavity preparation, restorative procedures was evaluated, considering the degree of sleep, body movement, crying and overall behavior. Vital signs were assessed at three different times. The Wilcoxon, Mann-Whitney, Exact Fisher′s and Spearman correlation tests were used to analyze the data. Results : Group I presented higher scores for sleep during the CH session than placebo session during rubber dam application ( P = 0.0431 and restoration ( P = 0.0431. In Group II there was no statistically significant difference ( p > 0.05. There were no statistically significant differences between sessions and groups in the evaluation of body movement, crying and vital signs. Overall behavior in the placebo session was better than in the CH session during local anesthesia, but there was no difference between the two drug regimens. There was influence of age during anesthesia and cavity preparation in Group I and during rubber dam application in Group II. It was concluded that oral diazepam and chloral hydrate had no influence on the behavior management for dental treatment with the studied sample.

Radiographic signs and diagnosis of dental disease

International Nuclear Information System (INIS)

Bellows, J.

1993-01-01

Dental radiographs are critical for the complete assessment and treatment of dental diseases. Dental radiography is commonly used to evaluate congenital dental defects, periodontal disease, orthodontic manipulations, oral tumors, endodontic treatments, oral trauma, and any situation where an abnormality is suspected. Although standard radiographic equipment and film can be used to produce dental radiographs, dental X-ray equipment and film provide superior quality images and greater convenience of animal patient positioning. An understanding of normal dental radiographic anatomy is important when interpreting dental radiographs. Stage III periodontitis is the earliest stage of periodontal disease at which radiographic abnormalities become apparent. Bone loss associated with periodontal disease can be classified as either horizontal or vertical. Periapical radiolucencies can represent granulomas, cysts, or abscesses, whereas periapical radiodensities may represent sclerotic bone or condensing osteitis. Lytic lesions of the bone of the jaw often represent oral neoplasms. Neoplasms also can displace or disrupt teeth in the dental arch. Resorptive lesions can be external or internal and appear as radiolucent areas involving the external surface of the root or the pulp cavity, respectively. Feline dental resorptive lesions, also known as odontoclastic resorptions, are a specific form of dental resorptive lesions unique to cats

Industrialization of the nitrogen-doping preparation for SRF cavities for LCLS-II

Science.gov (United States)

Gonnella, D.; Aderhold, S.; Burrill, A.; Daly, E.; Davis, K.; Grassellino, A.; Grimm, C.; Khabiboulline, T.; Marhauser, F.; Melnychuk, O.; Palczewski, A.; Posen, S.; Ross, M.; Sergatskov, D.; Sukhanov, A.; Trenikhina, Y.; Wilson, K. M.

2018-03-01

The Linac Coherent Light Source II (LCLS-II) is a new state-of-the-art coherent X-ray source being constructed at SLAC National Accelerator Laboratory. It employs 280 superconducting radio frequency (SRF) cavities in order operate in continuous wave (CW) mode. To reduce the overall cryogenic cost of such a large accelerator, nitrogen-doping of the SRF cavities is being used. Nitrogen-doping has consistently been shown to increase the efficiency of SRF cavities operating in the 2.0 K regime and at medium fields (15-20 MV/m) in vertical cavity tests and horizontal cryomodule tests. While nitrogen-doping's efficacy for improvement of cavity performance was demonstrated at three independent labs, Fermilab, Jefferson Lab, and Cornell University, transfer of the technology to industry for LCLS-II production was not without challenges. Here we present results from the beginning of LCLS-II cavity production. We discuss qualification of the cavity vendors and the first cavities from each vendor. Finally, we demonstrate that nitrogen-doping has been successfully transferred to SRF cavity vendors, resulting in consistent production of cavities with better cryogenic efficiency than has ever been achieved for a large-scale accelerator.

Measurement of total occlusal convergence of 3 different tooth preparations in 4 different planes by dental students.

Science.gov (United States)

Yoon, Stephan S; Cheong, Chan; Preisser, John; Jun, Sangho; Chang, Brian M; Wright, Robert F

2014-08-01

Total occlusal convergence of crown preparation is an important didactic and clinical concept in dental education. The purpose of this study was to compare the discrepancy between the total occlusal convergence of dental students' typodont crown preparations and the ideal range (4 to 10 degrees) in 3 different regions of the mouth and in 4 different planes of the teeth. The dental students of the Class of 2012 at Harvard School of Dental Medicine were asked to prepare typodont teeth for crowns on 3 different teeth, the maxillary left central incisor (ceramic), mandibular left first molar (complete metal), and mandibular left first premolar (metal ceramic), during their third year preclinical summative examination and the Comprehensive Clinical Examination in their fourth year. Eighteen students prepared 3 teeth in their third and fourth years, whereas 19 students participated only in their fourth year, for a total of 55 sets of 3 teeth. By using custom fit die bases to reproduce the position, a novel procedure of measuring each tooth was accomplished in 4 different planes: the faciolingual, mesiodistal, mesiofacial-distolingual, and mesiolingual-distofacial. The total occlusal convergence of each image was measured with a computer screen protractor. The gingival 2 mm of the axial wall was used to determine the taper of each wall. Linear mixed model analysis was used to estimate and compare the total occlusal convergences of different teeth and planes (α=.05). Bonferroni corrections were used to adjust for post hoc multiple comparisons. The mean total occlusal convergence varied by tooth and plane (2-way interaction; Pplanes; the model-predicted 99% CIs for the total occlusal convergence were as follows: faciolingual (12.7, 19.4), mesiodistal (14.0, 19.3), mesiofacial-distolingual (13,4, 19.4), and mesiolingual-distofacial (13.7, 19.1). For the central incisor, 99% CIs for the total occlusal convergence were (15.9, 24.4) for the faciolingual measurement, providing

Systematic preservation of teeth and prophylaxis of dental decay on irradiated patients

International Nuclear Information System (INIS)

Horiot, J.C.; Schraub, S.

1975-01-01

200 patients were irradiated on the oral cavity and on salivary glands with doses of 3,000Rads and up. Teeth were preserved. A prophylactic treatment of dental decay was made using 5 minutes daily a fluoride gel into a carrier. The results showed an incidence of 5% for dental decay and 1% for osteo-radionecroses. Details are given about the selection of patients, the dental work-up and dental care before, during and after radiation therapy [fr

Comparison of Micro-Leakage around Temporary Restorative Materials Placed in Complex Endodontic Access Cavities: An In-Vitro Study

International Nuclear Information System (INIS)

Adnan, S.; Khan, F. R.

2016-01-01

Objective: To compare mean micro-leakage around 3 types of temporary restorative materials in-vitro, when placed adjacent to permanent restorations (amalgam) in complex endodontic access cavities. Study Design: Randomized controlled trial. Place and Duration of Study: Dental Clinics, Dental Laboratory and Research Laboratory at The Aga Khan University Hospital, Karachi, from January to Jun 2014. Methodology: After random allocation of 60 teeth into 3 experimental groups, each group had conventional class II cavities prepared and amalgam placed. After 14 days, endodontic access cavities were made in these teeth, followed byplacement of Cavit, IRM and CLIP (depth of 4 mm each). After thermo-cycling and immersion in 0.5 percentage methylene blue dye, the teeth were sectioned mesio-distally and observed under stereoscopic microscope (magnification * 4) along 2 interfaces 'a' and 'b' (tooth-temporary restoration and temporary restoration-primary restoration), respectively. Depth of dye penetration was measured in millimeters. Results: IRM was leakiest at interface 'a', cavit had highest dye penetration at interface 'b', while CLIP exhibited least micro-leakage at 'a' and 'b'. The mean dye penetration for Cavit was 0.80 ± 0.23 mm at 'a', and 2.24 ± 0.48 mm at 'b'. For IRM, it was 1.82 ± 0.09 mm at 'a', and 0.44 ± 0.13 mm at 'b'. For CLIP, the mean dye penetration was 0.43 ± 0.05 mm at 'a', and 0.32 ± 0.12 mm at 'b'. The difference in dye penetration observed between the 3 groups at both interfaces was statistically significant. Conclusion: In a complex access cavity made adjacent to a pre-existing amalgam restoration, CLIP exhibits the least micro-leakage, followed by IRM and Cavit. (author)

The Effects of Ionizing Radiation on the Oral Cavity.

Science.gov (United States)

de Barros da Cunha, Sandra Ribeiro; Ramos, Pedro Augusto Mendes; Nesrallah, Ana Cristina Aló; Parahyba, Cláudia Joffily; Fregnani, Eduardo Rodrigues; Aranha, Ana Cecília Corrêa

2015-08-01

The aim of this study is to present a literature review on the effects of the ionizing radiation from radiotherapy treatment on dental tissues. Among the effects of increasing global life expectancy and longevity of the teeth in the oral cavity, increasing rates of neoplastic diseases have been observed. One of the important treatment modalities for head and neck neoplastic diseases is radiotherapy, which uses ionizing radiation as the main mechanism of action. Therefore, it is essential for dentists to be aware of the changes in oral and dental tissues caused by ionizing radiation, and to develop treatment and prevention strategies. In general, there is still controversy about the effects of ionizing radiation on dental structures. However, qualitative and quantitative changes in saliva and oral microbiota, presence of oral mucositis and radiation-related caries are expected, as they represent the well-known side effects of treatment with ionizing radiation. Points that still remain unclear are the effects of radiotherapy on enamel and dentin, and on their mechanisms of bonding to contemporary adhesive materials. Ionizing radiation has shown important interaction with organic tissues, since more deleterious effects have been shown on the oral mucosa, salivary glands and dentin, than on enamel. With the increasing number of patients with cancer seeking dental treatment before and after head and neck radiotherapy, it is important for dentists to be aware of the effects of ionizing radiation on the oral cavity.

Digital dental photography. Part 2: Purposes and uses.

Science.gov (United States)

Ahmad, I

2009-05-09

Although the primary purpose of using digital photography in dentistry is for recording various aspects of clinical information in the oral cavity, other benefits also accrue. Detailed here are the uses of digital images for dento-legal documentation, education, communication with patients, dental team members and colleagues and for portfolios, and marketing. These uses enhance the status of a dental practice and improve delivery of care to patients.

Micro energy-dispersive X-ray fluoresence mapping of enamel and dental materials after chemical erosion.

Science.gov (United States)

Soares, Luís Eduardo Silva; de Oliveira, Rodrigo; Nahórny, Sídnei; Santo, Ana Maria do Espírito; Martin, Airton Abrahão

2012-10-01

Energy-dispersive X-ray fluorescence was employed to test the hypothesis that beverage consumption or mouthwash utilization will change the chemical properties of dental materials and enamel mineral content. Bovine enamel samples (n = 45) each received two cavity preparations (n = 90), each pair filled with one of three dental materials (R: nanofilled composite resin; GIC: glass-ionomer cement; RMGIC: resin-modified GIC). Furthermore, they were treated with three different solutions (S: saliva; E: erosion/Pepsi Twist®; or EM: erosion+mouthwash/Colgate Plax®). It was found that mineral loss in enamel was greater in GICE samples than in RE > RMGICE > RMGICEM > REM > GICEM. An increased percentage of Zr was found in REM indicating organic matrix degradation. Dental materials tested (R, GIC, and RMGIC) were not able to protect adjacent enamel from acid erosion by the soft drink tested. The use of mouthwash promoted protection of enamel after erosion by the soft drink. To avoid chemical dissolution by mouthwashes, protection by resin composites with surface sealants is recommended.

Colonization of the oral cavity by probiotic bacteria.

Science.gov (United States)

Ravn, I; Dige, I; Meyer, R L; Nyvad, B

2012-01-01

The aim of this study was to investigate if three probiotic bacteria present in the milk product Cultura Dofilus® naturell could be detected in saliva and on oral mucosal surfaces, and if they colonized dental surfaces in situ in 8 caries-inactive individuals after 8 daily exposures to the milk product for up to 3 days. Bacteria were identified by fluorescence in situ hybridization and confocal laser scanning microscopy. While probiotic bacteria were present sporadically in the oral cavity on mucosal surfaces and in saliva after 3 days of frequent use of the probiotic milk, they were not detected on dental surfaces. Probiotic bacteria may thus contribute to general oral health, but their potential role in biofilm-induced dental diseases remains unclear. Copyright © 2012 S. Karger AG, Basel.

Evaluation of the cavity margins after Er:YAG laser ablation of the enamel and dentin

Science.gov (United States)

Dostalova, Tatjana; Krejsa, Otakar; Jelinkova, Helena; Hamal, Karel

1994-12-01

This study investigates the checks of cavity margin after enamel and dentin ablation. The Er:YAG laser enamel and dentin ablation can be directly connected with the danger of cracks originating in the enamel near the cavity. This study evaluates the quality of the enamel edges after Er:YAG laser preparation. The enamel and dentin of buccal surfaces were ablated by the Er:YAG laser radiation. An Erbium:YAG laser system with the energy of 200 mJ was used to generate 200 microsecond(s) long pulses of mid-infrared 2.94 micrometers light in multimode configuration. The laser was operating in a free running mode, the repetition rate being 0.5 Hz with average laser power of 100 mW. Laser radiation was focused on the tooth tissue. Water cooling was used during the procedure in order to prevent tooth tissue destruction. The time of laser preparation was 5 minutes. A cavity of class V was prepared. The teeth were immersed into 0.5% basic fuchsin and then centrifuged at 6000 rev/min for 20 minutes. The microphotographs of the margins stained with 0.5% basic fuchsin were made and then the longitudinal section of the teeth were evaluated. The micrographs of the longitudinal section were checked and measured afterwards. The effect of the investigated laser irradiation on the origin of cracks was analyzed in the scanning electron microscope. Micrographs of each tooth before and after the laser ablation were compared. Micrographs of the intact teeth after extraction present the cracks of the enamel. They depend on the pressure exerted during extraction. The influence of the laser ablation proper is it bears no signs of new cracks. The conclusions of this study demonstrate the non-invasive nature of the Er:YAG laser ablation of the hard dental tissues.

Lesbian, gay, bisexual, and transgender (LGBT) issues in dental school environments: dental student leaders' perceptions.

Science.gov (United States)

Anderson, Joan I; Patterson, April N; Temple, Henry J; Inglehart, Marita Rohr

2009-01-01

The objectives of the study reported in this article were to assess dental student leaders' perceptions of educational efforts concerning lesbian, gay, bisexual, and transgender (LGBT) topics and the cultural climate concerning LGBT issues in dental schools in the United States and Canada. In addition, the perceptions of student leaders who self-identified as belonging to the LGBT community and of students with a heterosexual orientation were compared. Data were collected from 113 dental student leaders from twenty-seven dental schools in the United States and three in Canada. Fifty student leaders were females, and sixty-two were males. Only 13.3 percent of the respondents agreed that their dental education prepared them well to treat patients from LGBT backgrounds. The more the student leaders believed that their university has an honest interest in diversity, the better they felt prepared by their dental school program to treat patients from LGBT backgrounds (r=.327; pschools' administrations create a positive environment for students with LGBT orientations, the more they agreed that persons can feel comfortable regardless of their sexual orientation (r=.585; pschool administrators play an important role in ensuring that future care providers are well prepared to treat patients from LGBT backgrounds and that staff, faculty, students, and patients from these backgrounds are not discriminated against.

EATING DISORDERS: DENTAL IMPLICATIONS – CASE REPORT

Directory of Open Access Journals (Sweden)

Matjaž Rode

2003-10-01

Full Text Available Background. Obesity, anorexia and bulimia are typical civilisation diseases or diseases of unhealthy living. They affect mainly white women in their childhood and adolescence. Occurrence of these diseases is getting higher also in Slovenia. Changes inside the oral cavity of a bulimic patient may be detected during a routine clinical examination. This places dental professionals in a position to be among the first to detect bulimia which is usually characterized by episodes of purging behaviors such as self-induced vomiting. Such vomiting brings stomach acids in contact with the mouth and teeth, causing erosion of tooth enamel which often leads to severely decayed teeth.Methods. This study presents a case of successful treatment of oral symptoms and dental rehabilitation in female patient with bulimia.Conclusions. Dental rehabilitation for bulimic patients is more than just a substituting of their bad and lost teeth. It is actually the first step toward their regained self-respect. Therefore it is important for the dentist to be familiar with the clinical symptoms of these diseases that can be revealed in oral cavity to efficiently contribute to a patient rehabilitation.

The Allied Dental Professions: Executive Summary.

Science.gov (United States)

Fried, Jacquelyn L

2017-09-01

This executive summary for Section 5 of the "Advancing Dental Education in the 21 st Century" project addresses the current and future educational systems for dental assisting, dental hygiene, dental therapy, and dental laboratory technology. Nineteen experts prepared six background articles on the educational changes necessary for future roles and practices. The key issues addressed relate to delivery system changes, educational curricula, scopes of practice, regulatory measures, and the public's oral health. The major finding is that substantial reforms will be needed to adequately prepare allied oral health professionals for the changes anticipated in 2040. A reconsideration of current accreditation guidelines, more flexibility with scopes of practice, and an adherence to rigorous academic programs are essential elements for the future of these professions.

Dental stories for children with autism.

Science.gov (United States)

Marion, Ian W; Nelson, Travis M; Sheller, Barbara; McKinney, Christy M; Scott, JoAnna M

2016-07-01

To investigate caregivers' preference regarding dental stories to prepare children with autism for dental visits. Caregivers of children with autism were allowed use of dental stories available via different media (paper, tablet computer, computer) and image types (comics or drawings, photographs, video). Caregivers completed pre- and postintervention surveys. Fisher's exact tests were used to determine associations between predictive factors and preferences. Forty initial and 16 follow-up surveys were completed. Subjects were primarily male (85%). Mean child age was 6.7 years. Nine (64%) caregivers found the dental story useful for themselves and their child. Two (14%) caregivers found the aid only helpful for themselves. Preferred media type was associated with language understanding (p = .038) and home media preference (p = .002). Practitioners should consider using dental stories to help prepare families and children for dental visits. Individual preferences for dental stories vary; using prior history can aid in selection. © 2016 Special Care Dentistry Association and Wiley Periodicals, Inc.

Analysis of metal artifact reduction tools for dental hardware in CT scans of the oral cavity: kVp, iterative reconstruction, dual-energy CT, metal artifact reduction software: does it make a difference?

Energy Technology Data Exchange (ETDEWEB)

Crop, An de; Hoof, Tom van; Herde, Katharina d' ; Thierens, Hubert; Bacher, Klaus [Ghent University, Department of Basic Medical Sciences, Gent (Belgium); Casselman, Jan; Vereecke, Elke; Bossu, Nicolas [AZ Sint Jan Bruges Ostend AV, Department of Radiology, Bruges (Belgium); Dierens, Melissa [Ghent University, Dental School, Unit for Oral and Maxillofacial Imaging, Ghent (Belgium); Pamplona, Jaime [Hospital Lisboa Central, Department of Neuroradiology, Lisbon (Portugal)

2015-08-15

Metal artifacts may negatively affect radiologic assessment in the oral cavity. The aim of this study was to evaluate different metal artifact reduction techniques for metal artifacts induced by dental hardware in CT scans of the oral cavity. Clinical image quality was assessed using a Thiel-embalmed cadaver. A Catphan phantom and a polymethylmethacrylate (PMMA) phantom were used to evaluate physical-technical image quality parameters such as artifact area, artifact index (AI), and contrast detail (IQF{sub inv}). Metal cylinders were inserted in each phantom to create metal artifacts. CT images of both phantoms and the Thiel-embalmed cadaver were acquired on a multislice CT scanner using 80, 100, 120, and 140 kVp; model-based iterative reconstruction (Veo); and synthesized monochromatic keV images with and without metal artifact reduction software (MARs). Four radiologists assessed the clinical image quality, using an image criteria score (ICS). Significant influence of increasing kVp and the use of Veo was found on clinical image quality (p = 0.007 and p = 0.014, respectively). Application of MARs resulted in a smaller artifact area (p < 0.05). However, MARs reconstructed images resulted in lower ICS. Of all investigated techniques, Veo shows to be most promising, with a significant improvement of both the clinical and physical-technical image quality without adversely affecting contrast detail. MARs reconstruction in CT images of the oral cavity to reduce dental hardware metallic artifacts is not sufficient and may even adversely influence the image quality. (orig.)

[Recent achievements in the microbiological etiology of dental caries].

Science.gov (United States)

Jing, Chen; Lei, Cheng; Xuedong, Zhou; Xian, Peng

2018-02-01

Dental caries is the most common chronic infectious disease of the oral cavity. The bacterium Streptococcus mutans is the sole pathogen that causes this disease. However, substantial evidence suggests that prevention and treatment strategies developed from traditional "cariogenic pathogen theory" are inefficient in reducing the prevalence of dental caries. An increasing number of individuals adopt the ecological view of the microbiota in the pathogenesis of dental caries. Recent technological improvements have enabled the detection and analysis of oral microorganisms, and many studies have focused on this area. The core microbiota is defined as a cluster of microbes playing critical roles in the initial and development phases of dental caries and may provide future direction for microorganism-related etiological studies.

Signos Vitales de los CDC–Los selladores dentales previenen las caries (Dental Sealants Prevent Cavities)

Centers for Disease Control (CDC) Podcasts

Este podcast se basa en la edición de octubre del 2016 del informe Signos Vitales de los CDC. Los selladores dentales, que se aplican poco después de que les salgan las muelas permanentes a los niños, pueden protegerlos contra las caries hasta por nueve años. Aplicarles los selladores dentales a los niños de bajos ingresos en las escuelas podría ahorrar millones de dólares en costos de tratamientos.

Systematic preservation of teeth and prophylaxis of dental decay on irradiated patients. Preliminary results

Energy Technology Data Exchange (ETDEWEB)

Horiot, J C [Centre de Lutte contre le Cancer Georges-Francois-Leclerc, 21 - Dijon (France); Schraub, S [Centre Hospitalier Universitaire, 25 - Besancon (France)

1975-11-01

200 patients were irradiated on the oral cavity and on salivary glands with doses of 3,000 Rads and up. Teeth were preserved. A prophylactic treatment of dental decay was made using 5 minutes daily a fluoride gel into a carrier. The results showed an incidence of 5% for dental decay and 1% for osteo-radionecroses. Details are given about the selection of patients, the dental work-up and dental care before, during and after radiation therapy.

The transition from quantum Zeno to anti-Zeno effects for a qubit in a cavity by varying the cavity frequency

Energy Technology Data Exchange (ETDEWEB)

Cao, Xiufeng, E-mail: xfcao@xmu.edu.cn [Department of Physics and Institute of Theoretical Physics and Astrophysics, Xiamen University, Xiamen 361005 (China); Advanced Science Institute, RIKEN, Wako-shi 351-0198 (Japan); Ai, Qing; Sun, Chang-Pu [Advanced Science Institute, RIKEN, Wako-shi 351-0198 (Japan); Institute of Theoretical Physics, Chinese Academy of Sciences, Beijing 100190 (China); Nori, Franco [Advanced Science Institute, RIKEN, Wako-shi 351-0198 (Japan); Physics Department, The University of Michigan, Ann Arbor, MI 48109-1040 (United States)

2012-01-09

We propose a strategy to demonstrate the transition from the quantum Zeno effect (QZE) to the anti-Zeno effect (AZE) using a superconducting qubit coupled to a transmission line cavity, by varying the central frequency of the cavity mode. Our results are obtained without the rotating wave approximation (RWA), and the initial state (a dressed state) is easy to prepare. Moreover, we find that in the presence of both qubit's intrinsic bath and the cavity bath, the emergence of the QZE and the AZE behaviors relies not only on the match between the qubit energy-level-spacing and the central frequency of the cavity mode, but also on the coupling strength between the qubit and the cavity mode. -- Highlights: ► We propose how to demonstrate the transition from Zeno effect to anti-Zeno effect. ► Our results are beyond the RWA, and the initial state is easy to prepare. ► The case of both qubit's intrinsic bath and cavity bath coexist is also studied.

The Superconducting TESLA Cavities

CERN Document Server

Aune, B.; Bloess, D.; Bonin, B.; Bosotti, A.; Champion, M.; Crawford, C.; Deppe, G.; Dwersteg, B.; Edwards, D.A.; Edwards, H.T.; Ferrario, M.; Fouaidy, M.; Gall, P-D.; Gamp, A.; Gössel, A.; Graber, J.; Hubert, D.; Hüning, M.; Juillard, M.; Junquera, T.; Kaiser, H.; Kreps, G.; Kuchnir, M.; Lange, R.; Leenen, M.; Liepe, M.; Lilje, L.; Matheisen, A.; Möller, W-D.; Mosnier, A.; Padamsee, H.; Pagani, C.; Pekeler, M.; Peters, H-B.; Peters, O.; Proch, D.; Rehlich, K.; Reschke, D.; Safa, H.; Schilcher, T.; Schmüser, P.; Sekutowicz, J.; Simrock, S.; Singer, W.; Tigner, M.; Trines, D.; Twarowski, K.; Weichert, G.; Weisend, J.; Wojtkiewicz, J.; Wolff, S.; Zapfe, K.

2000-01-01

The conceptional design of the proposed linear electron-positron colliderTESLA is based on 9-cell 1.3 GHz superconducting niobium cavities with anaccelerating gradient of Eacc >= 25 MV/m at a quality factor Q0 > 5E+9. Thedesign goal for the cavities of the TESLA Test Facility (TTF) linac was set tothe more moderate value of Eacc >= 15 MV/m. In a first series of 27industrially produced TTF cavities the average gradient at Q0 = 5E+9 wasmeasured to be 20.1 +- 6.2 MV/m, excluding a few cavities suffering fromserious fabrication or material defects. In the second production of 24 TTFcavities additional quality control measures were introduced, in particular aneddy-current scan to eliminate niobium sheets with foreign material inclusionsand stringent prescriptions for carrying out the electron-beam welds. Theaverage gradient of these cavities at Q0 = 5E+9 amounts to 25.0 +- 3.2 MV/mwith the exception of one cavity suffering from a weld defect. Hence only amoderate improvement in production and preparation technique...

Dental caries experience among Albanian pre-school children: a national survey.

Science.gov (United States)

Hysi, D; Caglar, E; Droboniku, E; Toti, C; Kuscu, O O

2017-03-01

To determine the dental caries experience and treatment needs among 5-year-olds in Albania. This cross sectional study was conducted in 2015 by using a cluster sampling technique. The dmft was used to assess dental caries experience and caries prevalence as percentages of children with dmf⟩0. Caries treatment needs were assessed with dt/dmft x 100, missing teeth with mt/dmft x 100 and ft /dmft x 100 as the Care Index. 2,039 five-year-olds, from 17 districts of Albania were selected . Children's residency was divided into 3 main regions (South, West, Central and North). WHO 2013 diagnostic criteria were used and dental caries was recorded at cavity level d3. The mean age was 5.4 (SD 0.5) years. The caries prevalence (dmf⟩0) was 84.1%. The prevalence of children without cavitated lesions (d=0) was 20.1%. The mean dmft index was 4.41 (SD 3.83). The caries treatment needs were 84% (SD 26%). The Albanian 5-year-olds assessed in this survey had a high dental caries experience and untreated cavities in the primary dentition. The national health authorities should introduce preventive programs and improved dental care access for this age group. Copyright© 2017 Dennis Barber Ltd

Platelet-rich Preparation may serve as a Powerful Tool for Therapeutic Dental Pulp Regeneration

Directory of Open Access Journals (Sweden)

Hai-Hua Sun

2011-09-01

Full Text Available Introduction: Regeneration of dental pulp tissues presents one of the most challenging issues in regenerative dentistry due to their extremely poor intrinsic ability for self-healing and re-growth.The hypothesis: We hypothes-ize that patient-derived platelet-rich preparation can be used in clinical endodontic regenerative procedure, serving as a powerful tool for therapeutic dental pulp regeneration.Evaluation of the hypothesis: The cell transplantation does not always obtain the good result because of the low survival rate of transplanted cells. In addition, the use of ex vivo manipulated cell products faces many translational hurdles in treating non-vital disease. Recently, the body cells are focused as a potential source for therapeutics. Some researchers have demonstrated that endogenous stem cells may be recruited to a desired anatomic site pharma-cologically. This is spurring interest in developing new generation of biomaterials that incorporate and release selected powerful extracellular influences in a near-physiological fashion, and subsequently capture endogenous stem cells and influence their fates for regene-ration. The use of patient-derived products such as platelet-rich preparations that contain a multitude of endogenous growth factors and proteins is a clinically translatable biotechnology for this proposes. These simple and cost efficient procedures may have a potential impact in reducing the economic costs for standard medical treatments in regenerative endodontics.

Feline dental radiography and radiology: A primer.

Science.gov (United States)

Niemiec, Brook A

2014-11-01

Information crucial to the diagnosis and treatment of feline oral diseases can be ascertained using dental radiography and the inclusion of this technology has been shown to be the best way to improve a dental practice. Becoming familar with the techniques required for dental radiology and radiography can, therefore, be greatly beneficial. Novices to dental radiography may need some time to adjust and become comfortable with the techniques. If using dental radiographic film, the generally recommended 'E' or 'F' speeds may be frustrating at first, due to their more specific exposure and image development requirements. Although interpreting dental radiographs is similar to interpreting a standard bony radiograph, there are pathologic states that are unique to the oral cavity and several normal anatomic structures that may mimic pathologic changes. Determining which teeth have been imaged also requires a firm knowledge of oral anatomy as well as the architecture of dental films/digital systems. This article draws on a range of dental radiography and radiology resources, and the benefit of the author's own experience, to review the basics of taking and interpreting intraoral dental radiographs. A simplified method for positioning the tubehead is explained and classic examples of some common oral pathologies are provided. © ISFM and AAFP 2014.

Radium-226-induced dental disease in Beagles: a radiographic study

International Nuclear Information System (INIS)

Morgan, J.P.; Miyabayashi, T.; Goldman, M.; Soo, S.

1987-01-01

Evaluation of dental radiographs made at necropsy and during the life of the dogs clearly shows age dependent changes within the control dogs. Periodontal diseases, loss of lamina dura, root ankylosis, and loss of pulp cavity were all commonly noted. Tooth loss and dental caries were rare in the control dogs. In injected Beagles loss of lamina dura was noted earlier and was dose dependent. Tooth loss and dental carried increased with dose level and appeared earlier. Tooth loss was common by 1600-1800 days of age while dental caries were common in almost all dogs by 1600-1800 days of age in the R40 level. Dental caries was the most accurate indication of the level of 226 Ra toxicity. 18 reference, 1 table

The implications of the new paradigm of dental caries.

Science.gov (United States)

Kidd, Edwina

2011-12-01

The caries process is the ubiquitous, natural metabolism in the biofilm that causes numerous fluctuations in pH. The interaction of this biofilm with the dental tissues may result in a caries lesion. However, lesion formation and progression can be controlled, particularly by disturbing plaque regularly with a fluoride containing toothpaste. This paradigm implies that everyone with teeth is at risk to lesion development. Treatment of caries is principally non-operative, involving plaque control, fluoride and a sensible diet. Operative dentistry repairs un-cleansable cavities and is part of plaque control. A diagnosis is a mental resting place on the way to a treatment decision. The relevant diagnostic features with respect to caries are lesion activity (active lesions require active management) and un-cleansable cavities. When teaching undergraduates, it is important that they are credited for the non-operative treatment of caries as well as for operative dentistry. This is equally important in dental practice where an appropriate skills mix of the dental team is required to deliver dental health cost-effectively. Training more dentists may be an expensive mistake as far as disease control is concerned. It is ironic that dentists make most money from operative care and specialist treatment when disease control could be delivered relatively cheaply. The key to dental health is regular and effective plaque control with a fluoride containing toothpaste, from cradle to grave. Copyright © 2011 Elsevier Ltd. All rights reserved.

DENTAL CONSIDERATIONS FOR LEUKEMIC PEDIATRIC PATIENTS: AN UPDATED REVIEW FOR GENERAL DENTAL PRACTITIONER.

Science.gov (United States)

Lowal, Kholoud A; Alaizari, Nader Ahmed; Tarakji, Bassel; Petro, Waleed; Hussain, Khaja Amjad; Altamimi, Mohamed Abdullah Alsakran

2015-10-01

The early signs of leukemia can usually manifest in the oral cavity due to infiltration of leukemic cells or due to associated decline in normal marrow elements, especially in the acute phase of leukemia, as common lesions at this stage of the disease can be screened and diagnosed by the dentist. Therefore, the dental community should be aware of the oral manifestations of leukemia and oral complications of anticancer treatment. This can eliminate the oral symptoms of the disease and to improve quality of life for these patients. An extensive search in PubMed line using a combination of terms like "leukemia, children, dental, Acute lymphoblastic leukemia, pediatric" for last ten years was made. Reviews and case reports concerned about acute lymphoblastic leukemia in children were all collected and analyzed and data were extracted. Accordingly, the aim of this review is to highlight on the oral presentations of leukemia in children attending dental clinics and the management of its undesirable side effects.

Preparation of Schrödinger cat states of a cavity field via coupling to a superconducting charge qubit

Science.gov (United States)

Freitas, Dagoberto S.; Nemes, M. C.

2014-05-01

We extend the approach in Ref. 5 [Y.-X. Liu, L. F. Wei and F. Nori, Phys. Rev. A 71 (2005) 063820] for preparing superposition states of a cavity field interacting with a superconducting charge qubit. We study effects of the nonlinearity on the creation of such states. We show that the main contribution of nonlinear effects is to shorten the time necessary to build the superposition.

Botulinum toxin in preparation of oral cavity for microsurgical reconstruction.

Science.gov (United States)

Corradino, Bartolo; Di Lorenzo, Sara; Mossuto, Carmela; Costa, Renato Patrizio; Moschella, Francesco

2010-01-01

Infiltration of botulinum toxin in the major salivary glands allows a temporary reduction of salivation that begins 8 days afterwards and returns to normal within 2 months. The inhibition of salivary secretion, carried out before the oral cavity reconstructive surgery, could allow a reduction of the incidence of oro-cutaneous fistulas and local complications. Saliva stagnation is a risk factor for patients who have to undergo reconstructive microsurgery of the oral cavity, because of fistula formation and local complications in the oral cavity. The authors suggest infiltration of botulinum toxin in the major salivary glands to reduce salivation temporarily during the healing stage. During the preoperative stage, 20 patients with oral cavity carcinoma who were candidates for microsurgical reconstruction underwent sialoscintigraphy and a quantitative measurement of the salivary secretion. Injection of botulinum toxin was carried out in the salivary glands 4 days before surgery. The saliva quantitative measurement was repeated 3 and 8 days after infiltration, sialoscintigraphy after 15 days. In all cases, the saliva quantitative measurement revealed a reduction of 50% and 70% of the salivary secretion after 72 h and 8 days, respectively. A lower rate of local complications was observed.

The dental cavities of equine cheek teeth: three-dimensional reconstructions based on high resolution micro-computed tomography

Directory of Open Access Journals (Sweden)

Kopke Susan

2012-09-01

Full Text Available Abstract Background Recent studies reported on the very complex morphology of the pulp system in equine cheek teeth. The continuous production of secondary dentine leads to distinct age-related changes of the endodontic cavity. Detailed anatomical knowledge of the dental cavities in all ages is required to explain the aetiopathology of typical equine endodontic diseases. Furthermore, data on mandibular and maxillary pulp systems is in high demand to provide a basis for the development of endodontic therapies. However, until now examination of the pulp cavity has been based on either sectioned teeth or clinical computed tomography. More precise results were expected by using micro-computed tomography with a resolution of about 0.1 mm and three-dimensional reconstructions based on previous greyscale analyses and histological verification. The aim of the present study was to describe the physiological configurations of the pulp system within a wide spectrum of tooth ages. Results Maxillary teeth: All morphological constituents of the endodontic cavity were present in teeth between 4 and 16 years: Triadan 06s displayed six pulp horns and five root canals, Triadan 07-10s five pulp horns and four root canals and Triadan 11s seven pulp horns and four to six root canals. A common pulp chamber was most frequent in teeth ≤5 years, but was found even in a tooth of 9 years. A large variety of pulp configurations was observed within 2.5 and 16 years post eruption, but most commonly a separation into mesial and distal pulp compartments was seen. Maxillary cheek teeth showed up to four separate pulp compartments but the frequency of two, three and four pulp compartments was not related to tooth age (P > 0.05. In Triadan 06s, pulp horn 6 was always connected to pulp horns 1 and 3 and root canal I. In Triadan 11s, pulp horns 7 and 8 were present in variable constitutions. Mandibular teeth: A common pulp chamber was present in teeth up to 15 years, but most

A database for superconducting cavities for the TESLA Test Facility

International Nuclear Information System (INIS)

Gall, P.D.; Goessel, A.; Gubarev, V.; Iversen, J.

2006-01-01

We look back on 10 years experience using a database for superconducting cavities for the TESLA Test Facility (TTF). The database was developed to collect data of every preparation step and measurement in order to optimize cavity production and preparation techniques to meet the ambitious goal of high accelerating gradients at high quality factors. Data from 110 superconducting 9-cell cavities, 50 single cell cavities, several 2- to 7-cell cavities and about 60 RF couplers were collected in the database. In addition, company measurements on sub-assemblies and parts forming the next 30 9-cell cavities were stored, thus establishing the database as part of a quality management system. This database is dynamically accessible via an extensive graphical web-interface based on ORACLE products, which enables the users to select and analyse the collected data easily from anywhere

Effect of cavity disinfectants on antibacterial activity and microtensile bond strength in class I cavity.

Science.gov (United States)

Kim, Bo-Ram; Oh, Man-Hwan; Shin, Dong-Hoon

2017-05-31

This study was performed to compare the antibacterial activities of three cavity disinfectants [chlorhexidine (CHX), NaOCl, urushiol] and to evaluate their effect on the microtensile bond strength of Scotchbond Universal Adhesive (3M-ESPE, St. Paul, MN, USA) in class I cavities. In both experiments, class I cavities were prepared in dentin. After inoculation with Streptococcus mutans, the cavities of control group were rinsed and those of CHX, NaOCl and urushiol groups were treated with each disinfectant. Standardized amounts of dentin chips were collected and number of S. mutans was determined. Following the same cavity treatment, same adhesive was applied in etch-and-rinse mode. Then, microtensile bond strength was evaluated. The number of S. mutans was significantly reduced in the cavities treated with CHX, NaOCl, and urushiol compared with control group (p<0.05). However, there was a significant bond strength reduction in NaOCl group, which showed statistical difference compared to the other groups (p<0.05).

Influence of the Toothpaste with Brazilian Ethanol Extract Propolis on the Oral Cavity Health

Directory of Open Access Journals (Sweden)

Dariusz Skaba

2013-01-01

Full Text Available Propolis-based therapeutic agents represent this potential for the development of new drugs in dental care. The aim of a clinical-cohort study was to determine the influence of application of toothpaste enriched with Brazilian extract of propolis (EEP on health status of oral cavity. Laboratory analysis was conducted in order to assess the chemical composition of EEP including total phenolic compounds, the DPPH (1,1-diphenyl-2-picrylhydrazyl radical scavenging activity, ABTS radical cation scavenging activity, and FRAP assay. Clinical research involved two groups of subjects comprising 32 adult patients, with assessment based on the preliminary evaluation of the state of their marginal periodontium. The investigation of oral health indices API, OHI, and SBI and microbiological examination of oral microflora were also carried out. Results obtained indicated time-dependent microbial action of EEP at 50 mg/L concentration, with antimicrobial activity against Gram-positive bacteria. The total decrease of API, OHI, and SBI mean values was observed. Hygienic preparations with 3% content of Brazilian ethanol extract of green propolis (EEP efficiently support removal of dental plaque and improve the state of marginal periodontium.

Signos Vitales de los CDC–Los selladores dentales previenen las caries (Dental Sealants Prevent Cavities)

Centers for Disease Control (CDC) Podcasts

2016-10-18

Este podcast se basa en la edición de octubre del 2016 del informe Signos Vitales de los CDC. Los selladores dentales, que se aplican poco después de que les salgan las muelas permanentes a los niños, pueden protegerlos contra las caries hasta por nueve años. Aplicarles los selladores dentales a los niños de bajos ingresos en las escuelas podría ahorrar millones de dólares en costos de tratamientos.  Created: 10/18/2016 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 10/18/2016.

The CuHBr laser in hard dental tissues

International Nuclear Information System (INIS)

Miyakawa, Walter

2004-01-01

In this work, it was verified the viability of characterization of laser-irradiated dental tissues in two extreme conditions: high and low absorption by the dental tissue. Comparison with light microscopy and scanning electronic microscopy revealed that these techniques are complementary each other: quantitative topographic information is directly extracted from the atomic force microscopy, while morphological aspects can be imaged by light microscopy or scanning electronic microscopy. A cavity generated by Cu-HyBrID laser in human dental enamel was also evaluated by atomic force microscopy. Structural and morphological differences between the fused and resolidified enamel from the cavity walls and the enamel from the natural tis sue were analyzed. A model, based on the Monte Carlo method described the propagation of CuHBr laser radiation and the absorbed energy distribution in dental tissues. Experimental measures with a CCD camera were used to semiquantitatively characterize the scattered light distribution in the tooth and they corroborated the model. It was observed that Rayleigh scattering and diffuse scattered radiation is predominant. The absorbed energy distribution map and the temperature variation along the beam propagation axis presented strong dependence with the absorption coefficient of the dental enamel and they cannot be deduced from the light distribution profile. The exposure time threshold for dental enamel melting and evaporation, irradiated by a specific condition of the green line of the Cu-HyBrID laser, was determined and a phenomenological model was discussed for the laser-matter interaction, based on pulse accumulation effect. Theoretical temperature calculations associated with experimental evidences strongly suggest that optical and thermal parameters should vary with temperature. The obtained exposure time threshold should correspond to the time necessary to the sample reach the critical temperature, at which the increase of absorption

Exposure to nickel and palladium from dental appliances

NARCIS (Netherlands)

Ventura Da Cruz Rodrigues Milheiro, A.M.

2015-01-01

The application of a dental material into the oral cavity is not free of biological implications, as deterioration of the material will undoubtedly occur. The adverse health effects of palladium and nickel are well known and their immunologic cross-reactivity is well established. The aim of this

Impact of Digital Tooth Preparation Evaluation Technology on Preclinical Dental Students' Technical and Self-Evaluation Skills.

Science.gov (United States)

Gratton, David G; Kwon, So Ran; Blanchette, Derek; Aquilino, Steven A

2016-01-01

The aim of this study was to evaluate the effect of digital tooth preparation imaging and evaluation technology on dental students' technical abilities, self-evaluation skills, and the assessment of their simulated clinical work. A total of 80 second-year students at one U.S. dental school were assigned to one of three groups: control (n=40), E4D Compare (n=20), and Sirona prepCheck (n=20). Students in the control group were taught by traditional teaching methodologies, and the technology-assisted groups received both traditional training and supplementary feedback from the corresponding digital system. Three outcomes were measured: faculty technical score, self-evaluation score, and E4D Compare scores at 0.30 mm tolerance. Correlations were determined between the groups' scores from visual assessment and self-evaluation and between the visual assessment and digital scores. The results showed that the visual assessment and self-evaluation scores did not differ among groups (p>0.05). Overall, correlations between visual and digital assessment scores were modest though statistically significant (5% level of significance). These results suggest that the use of digital tooth preparation evaluation technology did not impact the students' prosthodontic technical and self-evaluation skills. Visual scores given by faculty and digital assessment scores correlated moderately in only two instances.

Dental caries in Rome, 50-100 AD

DEFF Research Database (Denmark)

Fejerskov, Ole; Bilde, P. Guldager; Bizzarro, Martin

2012-01-01

Scarce information exists on the clinical features of dental caries in the Imperial Roman population and no structural data on caries lesions from this period have so far been published. We report on the findings of 86 teeth (50-100 AD) found during archaeological excavations of the temple...... of Castor and Pollux in the Forum Romanum. We found that nearly all teeth had large carious cavities extending into the pulp. The distribution and size of the caries lesions were similar to those found in contemporary adult populations in Africa and China living without access to dental care. Most lesions...

Synchrotron-radiation-based X-ray micro-computed tomography reveals dental bur debris under dental composite restorations.

Science.gov (United States)

Hedayat, Assem; Nagy, Nicole; Packota, Garnet; Monteith, Judy; Allen, Darcy; Wysokinski, Tomasz; Zhu, Ning

2016-05-01

Dental burs are used extensively in dentistry to mechanically prepare tooth structures for restorations (fillings), yet little has been reported on the bur debris left behind in the teeth, and whether it poses potential health risks to patients. Here it is aimed to image dental bur debris under dental fillings, and allude to the potential health hazards that can be caused by this debris when left in direct contact with the biological surroundings, specifically when the debris is made of a non-biocompatible material. Non-destructive micro-computed tomography using the BioMedical Imaging & Therapy facility 05ID-2 beamline at the Canadian Light Source was pursued at 50 keV and at a pixel size of 4 µm to image dental bur fragments under a composite resin dental filling. The bur's cutting edges that produced the fragment were also chemically analyzed. The technique revealed dental bur fragments of different sizes in different locations on the floor of the prepared surface of the teeth and under the filling, which places them in direct contact with the dentinal tubules and the dentinal fluid circulating within them. Dispersive X-ray spectroscopy elemental analysis of the dental bur edges revealed that the fragments are made of tungsten carbide-cobalt, which is bio-incompatible.

Restricted diversity of dental calculus methanogens over five centuries, France.

Science.gov (United States)

Huynh, Hong T T; Nkamga, Vanessa D; Signoli, Michel; Tzortzis, Stéfan; Pinguet, Romuald; Audoly, Gilles; Aboudharam, Gérard; Drancourt, Michel

2016-05-11

Methanogens are acknowledged archaeal members of modern dental calculus microbiota and dental pathogen complexes. Their repertoire in ancient dental calculus is poorly known. We therefore investigated archaea in one hundred dental calculus specimens collected from individuals recovered from six archaeological sites in France dated from the 14(th) to 19(th) centuries AD. Dental calculus was demonstrated by macroscopic and cone-beam observations. In 56 calculus specimens free of PCR inhibition, PCR sequencing identified Candidatus Methanobrevibacter sp. N13 in 44.6%, Methanobrevibacter oralis in 19.6%, a new Methanomassiliicoccus luminyensis-like methanogen in 12.5%, a Candidatus Nitrososphaera evergladensis-like in one and Methanoculleus bourgensis in one specimen, respectively. One Candidatus Methanobrevibacter sp. N13 dental calculus was further documented by fluorescent in situ hybridization. The prevalence of dental calculus M. oralis was significantly lower in past populations than in modern populations (P = 0.03, Chi-square test). This investigation revealed a previously unknown repertoire of archaea found in the oral cavity of past French populations as reflected in preserved dental calculus.

Oral and dental health issues in people with mental disorders.

Science.gov (United States)

Torales, Julio; Barrios, Iván; González, Israel

2017-09-21

Patients with mental disorders are subject to a greater number of risk factors for oral and dental disease than the general population. This is mostly caused by the side effects of the medications that they receive, lack of self-care, difficulty to access health services, a negative attitude towards healthcare providers, and patients’ lack of cooperation in dental treatments. The most common psychiatric disorders in our population are depression, anxiety disorders, schizophrenia, bipolar disorder, and dementia. In disorders such as anxiety and depression, the main issue is the loss of interest in self-care, which results in a poor hygiene. The most frequent oral and dental diseases in these patients are dental cavities and periodontal disease. The purpose of this brief review is to provide up-to-date information about the management of oral and dental diseases of patients with mental disorders.

Correlation of osteoradionecrosis and dental events with dosimetric parameters in intensity-modulated radiation therapy for head-and-neck cancer.

Science.gov (United States)

Gomez, Daniel R; Estilo, Cherry L; Wolden, Suzanne L; Zelefsky, Michael J; Kraus, Dennis H; Wong, Richard J; Shaha, Ashok R; Shah, Jatin P; Mechalakos, James G; Lee, Nancy Y

2011-11-15

Osteoradionecrosis (ORN) is a known complication of radiation therapy to the head and neck. However, the incidence of this complication with intensity-modulated radiation therapy (IMRT) and dental sequelae with this technique have not been fully elucidated. From December 2000 to July 2007, 168 patients from our institution have been previously reported for IMRT of the oral cavity, nasopharynx, larynx/hypopharynx, sinus, and oropharynx. All patients underwent pretreatment dental evaluation, including panoramic radiographs, an aggressive fluoride regimen, and a mouthguard when indicated. The median maximum mandibular dose was 6,798 cGy, and the median mean mandibular dose was 3,845 cGy. Patient visits were retrospectively reviewed for the incidence of ORN, and dental records were reviewed for the development of dental events. Univariate analysis was then used to assess the effect of mandibular and parotid gland dosimetric parameters on dental endpoints. With a median clinic follow-up of 37.4 months (range, 0.8-89.6 months), 2 patients, both with oral cavity primaries, experienced ORN. Neither patient had preradiation dental extractions. The maximum mandibular dose and mean mandibular dose of the 2 patients were 7,183 and 6,828 cGy and 5812 and 5335 cGy, respectively. In all, 17% of the patients (n = 29) experienced a dental event. A mean parotid dose of >26 Gy was predictive of a subsequent dental caries, whereas a maximum mandibular dose >70 Gy and a mean mandibular dose >40 Gy were correlated with dental extractions after IMRT. ORN is rare after head-and-neck IMRT, but is more common with oral cavity primaries. Our results suggest different mechanisms for radiation-induced caries versus extractions. Copyright © 2011 Elsevier Inc. All rights reserved.

Correlation of Osteoradionecrosis and Dental Events With Dosimetric Parameters in Intensity-Modulated Radiation Therapy for Head-and-Neck Cancer

International Nuclear Information System (INIS)

Gomez, Daniel R.; Estilo, Cherry L.; Wolden, Suzanne L.; Zelefsky, Michael J.; Kraus, Dennis H.; Wong, Richard J.; Shaha, Ashok R.; Shah, Jatin P.; Mechalakos, James G.; Lee, Nancy Y.

2011-01-01

Purpose: Osteoradionecrosis (ORN) is a known complication of radiation therapy to the head and neck. However, the incidence of this complication with intensity-modulated radiation therapy (IMRT) and dental sequelae with this technique have not been fully elucidated. Methods and Materials: From December 2000 to July 2007, 168 patients from our institution have been previously reported for IMRT of the oral cavity, nasopharynx, larynx/hypopharynx, sinus, and oropharynx. All patients underwent pretreatment dental evaluation, including panoramic radiographs, an aggressive fluoride regimen, and a mouthguard when indicated. The median maximum mandibular dose was 6,798 cGy, and the median mean mandibular dose was 3,845 cGy. Patient visits were retrospectively reviewed for the incidence of ORN, and dental records were reviewed for the development of dental events. Univariate analysis was then used to assess the effect of mandibular and parotid gland dosimetric parameters on dental endpoints. Results: With a median clinic follow-up of 37.4 months (range, 0.8–89.6 months), 2 patients, both with oral cavity primaries, experienced ORN. Neither patient had preradiation dental extractions. The maximum mandibular dose and mean mandibular dose of the 2 patients were 7,183 and 6,828 cGy and 5812 and 5335 cGy, respectively. In all, 17% of the patients (n = 29) experienced a dental event. A mean parotid dose of >26 Gy was predictive of a subsequent dental caries, whereas a maximum mandibular dose >70 Gy and a mean mandibular dose >40 Gy were correlated with dental extractions after IMRT. Conclusions: ORN is rare after head-and-neck IMRT, but is more common with oral cavity primaries. Our results suggest different mechanisms for radiation-induced caries versus extractions.

Correlation of Osteoradionecrosis and Dental Events With Dosimetric Parameters in Intensity-Modulated Radiation Therapy for Head-and-Neck Cancer

Energy Technology Data Exchange (ETDEWEB)

Gomez, Daniel R., E-mail: dgomez@mdanderson.org [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, NY (United States); Estilo, Cherry L. [Dental Service, Department of Surgery, Memorial Sloan-Kettering Cancer Center, New York, NY (United States); Wolden, Suzanne L.; Zelefsky, Michael J. [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, NY (United States); Kraus, Dennis H.; Wong, Richard J.; Shaha, Ashok R.; Shah, Jatin P. [Department of Head and Neck Surgery, Memorial Sloan-Kettering Cancer Center, New York, NY (United States); Mechalakos, James G.; Lee, Nancy Y. [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, NY (United States)

2011-11-15

Purpose: Osteoradionecrosis (ORN) is a known complication of radiation therapy to the head and neck. However, the incidence of this complication with intensity-modulated radiation therapy (IMRT) and dental sequelae with this technique have not been fully elucidated. Methods and Materials: From December 2000 to July 2007, 168 patients from our institution have been previously reported for IMRT of the oral cavity, nasopharynx, larynx/hypopharynx, sinus, and oropharynx. All patients underwent pretreatment dental evaluation, including panoramic radiographs, an aggressive fluoride regimen, and a mouthguard when indicated. The median maximum mandibular dose was 6,798 cGy, and the median mean mandibular dose was 3,845 cGy. Patient visits were retrospectively reviewed for the incidence of ORN, and dental records were reviewed for the development of dental events. Univariate analysis was then used to assess the effect of mandibular and parotid gland dosimetric parameters on dental endpoints. Results: With a median clinic follow-up of 37.4 months (range, 0.8-89.6 months), 2 patients, both with oral cavity primaries, experienced ORN. Neither patient had preradiation dental extractions. The maximum mandibular dose and mean mandibular dose of the 2 patients were 7,183 and 6,828 cGy and 5812 and 5335 cGy, respectively. In all, 17% of the patients (n = 29) experienced a dental event. A mean parotid dose of >26 Gy was predictive of a subsequent dental caries, whereas a maximum mandibular dose >70 Gy and a mean mandibular dose >40 Gy were correlated with dental extractions after IMRT. Conclusions: ORN is rare after head-and-neck IMRT, but is more common with oral cavity primaries. Our results suggest different mechanisms for radiation-induced caries versus extractions.

Ludwig’s Angina: The Importance of Oral Cavity Examination in Patients with a Neck Mass

Directory of Open Access Journals (Sweden)

Mohamad I

2012-12-01

Full Text Available neck mass is a common condition in primary care. the most common affected area is the cervical lymph node. the neck region is also prone infection as structurally the nodes and spaces are in close contact with the upper respiratory tract and the alimentary tract. oral cavity is one of the most common route for harbouring infection. Poor oral hygeine and periapical dental problems are the main causes. thus, it is important to perform a complete oral cavity examination even when trismus is present. Besides dental caries, floor of the mouth should be inspected for oedema that may impose threat to the upper airway. We report a case of Ludwig’s angina originating from a periapical lesion of the lower molar stressing the importance of oral examination in patient with neck mass.

The psychosomatic disorders pertaining to dental practice with revised working type classification.

Science.gov (United States)

Shamim, Thorakkal

2014-01-01

Psychosomatic disorders are defined as disorders characterized by physiological changes that originate partially from emotional factors. This article aims to discuss the psychosomatic disorders of the oral cavity with a revised working type classification. The author has added one more subset to the existing classification, i.e., disorders caused by altered perception of dentofacial form and function, which include body dysmorphic disorder. The author has also inserted delusional halitosis under the miscellaneous disorders classification of psychosomatic disorders and revised the already existing classification proposed for the psychosomatic disorders pertaining to dental practice. After the inclusion of the subset (disorders caused by altered perception of dentofacial form and function), the terminology "psychosomatic disorders of the oral cavity" is modified to "psychosomatic disorders pertaining to dental practice".

The limitations in clinical teaching, learning and practice of ...

African Journals Online (AJOL)

The “extension for prevention” dogma by G.V Black had been jettisoned while the modern concept of conservatism or minimal cavity preparation has been well embraced by dental practitioners. However, there are some limitations in clinical teaching of conservative amalgam cavity preparation which include late patient ...

Occurrence of vancomycin-resistant Staphylococcus aureus in the oral cavity of patients with dental caries.

Science.gov (United States)

Vellappally, Sajith; Divakar, Darshan Devang; Al Kheraif, Abdulaziz Abdullah; Ramakrishnaiah, Ravikumar; Alqahtani, Amer; Dalati, M H N; Anil, Sukumaran; Khan, Aftab Ahmed; Harikrishna Varma, P R

2017-09-01

Oral streptococci are the major group of microbes isolated from oral microflora. They represent frequent pathogens of infective endocarditis (IE), and it is assumed that in most of the cases oral streptococci are acquired via mucosa layer of oral cavity. Staphylococcus aureus is also frequently isolated from IE as it accounts for 20%-30% of all cases. Vancomycin has been the most reliable therapeutic agent against infections caused by methicillin-resistant S. aureus (MRSA). The main objective of this study was to examine the occurrence of S. aureus species in dental caries specimens. Antimicrobial susceptibility testing of S. aureus to four antibiotics namely vancomycin, linezolid, teicoplanin, and daptomycin was performed. Detection of vancomycin resistance was conducted using polymerase chain reaction. Among the tested 150 strains, 98 were MRSA and of that 54 were vancomycin sensitive and 27 were resistant. All 98 MRSA strains were positive for mecA and 36 yielded pvl, whereas 13 carried vanA and only 2 were positive for vanB. Majority of the isolates showed sensitivity toward daptomycin and linezolid. Strains of S. aureus exhibiting decreased susceptibility to different antibiotics like vancomycin, daptomycin, and linezolid severely compromise the therapeutic alternatives and require a considerable amount of time, public awareness, and integrative health-care strategies to prevent the emergence of resistance to these compounds.

Program Design Considerations for Leadership Training for Dental and Dental Hygiene Students

Science.gov (United States)

Taichman, Russell S.; Parkinson, Joseph W.; Nelson, Bonnie A.; Nordquist, Barbara; Ferguson-Young, Daphne C.; Thompson, Joseph F.

2012-01-01

Since leadership is an essential part of the oral health professions, oral health educators can play an essential role in establishing a culture of leadership and in mentoring students to prepare them for future leadership roles within the profession. However, leadership training for oral health professionals is a relatively new concept and is frequently not found within dental and dental hygiene curricula. The purpose of this article is to propose several models for leadership training that are specific to the oral health professions. The authors hope that providing an overview of leadership programs in academic dental institutions will encourage all U.S. and Canadian dental schools to begin developing a culture that promotes leadership development. PMID:22319084

Advances in gastroenterology--opportunities and challenges for the dental practitioner.

Science.gov (United States)

Nolan, Anita

2012-04-01

As the oral cavity marks the beginning of the gastrointestinal tract (GIT), it is not surprising that it frequently mirrors disease that occurs lower in the GIT. Increasingly, clinical signs in the oral cavity are recognized as future predictors and prognostic indicators of GIT and, indeed, other systemic disease. This paper discusses recent advances in the overlap area of Oral Medicine and Gastroenterology and the significant role of the dental practitioner in the management of these patients.

Construct validity and expert benchmarking of the haptic virtual reality dental simulator.

Science.gov (United States)

Suebnukarn, Siriwan; Chaisombat, Monthalee; Kongpunwijit, Thanapohn; Rhienmora, Phattanapon

2014-10-01

The aim of this study was to demonstrate construct validation of the haptic virtual reality (VR) dental simulator and to define expert benchmarking criteria for skills assessment. Thirty-four self-selected participants (fourteen novices, fourteen intermediates, and six experts in endodontics) at one dental school performed ten repetitions of three mode tasks of endodontic cavity preparation: easy (mandibular premolar with one canal), medium (maxillary premolar with two canals), and hard (mandibular molar with three canals). The virtual instrument's path length was registered by the simulator. The outcomes were assessed by an expert. The error scores in easy and medium modes accurately distinguished the experts from novices and intermediates at the onset of training, when there was a significant difference between groups (ANOVA, p<0.05). The trend was consistent until trial 5. From trial 6 on, the three groups achieved similar scores. No significant difference was found between groups at the end of training. Error score analysis was not able to distinguish any group at the hard level of training. Instrument path length showed a difference in performance according to groups at the onset of training (ANOVA, p<0.05). This study established construct validity for the haptic VR dental simulator by demonstrating its discriminant capabilities between that of experts and non-experts. The experts' error scores and path length were used to define benchmarking criteria for optimal performance.

[Dental status and efficacy of Helicobacter pylori eradication].

Science.gov (United States)

Namiot, D B; Namiot, Z; Kemona, A; Gołebiewska, M

2001-04-01

Beside stomach Helicobacter pylori can colonize the oral cavity. One may think, therefore, that if H. pylori persists the eradication therapy in the oral cavity, it could infect the stomach again. Since in the oral cavity H. pylori occurs most frequently in a dental plaque gathering on teeth, the aim of the study was to investigate whether the natural teeth status is important for the efficacy of H. pylori eradication. The study was conducted on 45 peptic ulcer patients with natural teeth. They were eradicated with one of two regimens: 1/OAT-omeprazole (2 x 20 mg), amoxicillin (2 x 1000 mg), tinidazole (2 x 500 mg) (14-day course), 2/OAC-omeprazole (2 x 20 mg), amoxicillin (2 x 1000 mg), clarithromycin (2 x 250 mg) (7-day course). Dentistry examination was performed 4-6 weeks after the end of eradication therapy and consisted of determination of the number of teeth, caries index, dental treatment index, plaque index, and periodontal index. It was found that in successfully eradicated patients with OAT regimen, the number of teeth was higher and caries index lower than in those whose eradication therapy was unsuccessful; 24.8 +/- 5.2 vs 15.5 +/- 8.6 (p caries index were not associated with the efficacy of H. pylori eradication in OAC treated group. Irrespectively of the eradication regimen used, OAT or OAC, dental treatment index, plaque index, and periodontal index were not associated with the efficacy of H. pylori eradication. It is concluded that the natural teeth status may have influence on the outcome of H. pylori eradication. One should remember about this prescribing drugs for H. pylori eradication.

Pathogens and host immunity in the ancient human oral cavity

DEFF Research Database (Denmark)

Warinner, Christina; Rodrigues, João F Matias; Vyas, Rounak

2014-01-01

Calcified dental plaque (dental calculus) preserves for millennia and entraps biomolecules from all domains of life and viruses. We report the first, to our knowledge, high-resolution taxonomic and protein functional characterization of the ancient oral microbiome and demonstrate that the oral...... cavity has long served as a reservoir for bacteria implicated in both local and systemic disease. We characterize (i) the ancient oral microbiome in a diseased state, (ii) 40 opportunistic pathogens, (iii) ancient human-associated putative antibiotic resistance genes, (iv) a genome reconstruction...... calculus permits the simultaneous investigation of pathogen activity, host immunity and diet, thereby extending direct investigation of common diseases into the human evolutionary past....

Dental Hygienists' Perceptions of Preparedness for Clinical Practice: A Phenomenological Study

Science.gov (United States)

Cantrell, Lezlie M.

2012-01-01

The purpose of this phenomenological study was to identify, compile, and describe how community college graduate dental hygienists perceived their initial dental hygiene curriculum preparation and how they subsequently adapted their curriculum preparation in order to perform their responsibilities in their first clinical dental hygiene job.…

Shear bond strength and SEM morphology evaluation of different dental adhesives to enamel prepared with ER:YAG laser.

Science.gov (United States)

Pires, Patrícia T; Ferreira, João C; Oliveira, Sofia A; Azevedo, Alvaro F; Dias, Walter R; Melo, Paulo R

2013-01-01

Early observations of enamel surfaces prepared by erbium lasers motivated clinicians to use laser as an alternative to chemical etching. Evaluate shear bond strength (SBS) values of different dental adhesives on Erbium:Yttrium Aluminum Garnet (Er:YAG) laser prepared enamel and to evaluate possible etching patterns correlations between dental adhesives and SBS values. One hundred bovine incisors were randomly assigned to SBS tests on enamel (n = 15) and to enamel morphology analysis (n = 5) after Er:YAG laser preparation as follows: Group I - 37% phosphoric acid (PA)+ ExciTE(®); Group II - ExciTE(®); Group III - AdheSE(®) self-etching; Group IV - FuturaBond(®) no-rinse. NR; Group V - Xeno(®) V. Teeth were treated with the adhesive systems and subjected to thermal cycling. SBS were performed in a universal testing machine at 5 mm/min. One-way ANOVA and post-hoc tests (P adhesive systems yielded significantly different SBSs. Acid etching significantly increased the adhesion in laser treated enamel. No differences in SBS values were obtained between AdheSE(®) and ExciTE(®) without condition with PA. FuturaBond(®) NR and Xeno(®) V showed similar SBS, which was lower in comparison to the others adhesives. No correlation between enamel surface morphology and SBS values was observed, except when PA was used.

The Doctoral Degree in Dental Hygiene: Creating New Oral Healthcare Paradigms.

Science.gov (United States)

Gurenlian, JoAnn R; Rogo, Ellen J; Spolarich, Ann Eshenaur

2016-06-01

Doctoral dental hygiene education would prepare scholars and leaders to improve population health through changes in oral health policy and delivery. Discussions about doctoral education in dental hygiene have centered on the need to create a cadre of dental hygiene researchers and scholars who will expand the body of knowledge for the profession. It has been proposed that scholars are needed to lead the development of theory and disseminate knowledge unique to the discipline of dental hygiene. Transformation to doctoral education is not a new trend as many other health care disciplines have already implemented curricular models, establishing the doctoral degree for entry level into practice. The Institute of Medicine has called for the exploration of new models for care delivery. Dental hygienists need to be prepared with leadership skills enabling them to participate and lead interprofessional teams and develop policies designed to improve the delivery of oral health care services to enhance population health. Current educational models do not adequately prepare dental hygienists to serve in this capacity. The purpose of this article is to present 2 models of doctoral education for dental hygiene that will illustrate how dental hygienists can be better prepared as scholars and leaders for the profession. These proposed models of doctoral education in dental hygiene present a paradigm shift in dental hygiene education. As with other disciplines that have evolved, both academically and professionally, dental hygiene will be positioned to achieve the hallmark of professional status with this terminal degree. Copyright © 2016 Elsevier Inc. All rights reserved.

Health promotion and dental caries.

Science.gov (United States)

Maltz, Marisa; Jardim, Juliana Jobim; Alves, Luana Severo

2010-01-01

The central idea of the Brazilian health system is to prevent the establishment of disease or detect it as early as possible. Prevention and treatment of dental caries are related to behavioral factors, including dietary and oral hygiene habits, which are related to many chronic diseases. Dental health promotion therefore should be fully integrated into broadly based health-promoting strategies and actions such as food and health policies, and general hygiene (including oral hygiene), among others. For decades, a linear relationship between sugar consumption and caries has been observed. Recent data has indicated that this relationship is not as strong as it used to be before the widespread use of fluoride. However, diet is still a key factor acting in the carious process. Oral hygiene is a major aspect when it comes to caries, since dental biofilm is its etiological factor. Oral hygiene procedures are effective in controlling dental caries, especially if plaque removal is performed adequately and associated with fluoride. An alternative to a more efficient biofilm control in occlusal areas is the use of dental sealants, which are only indicated for caries-active individuals. If a cavity is formed as a consequence of the metabolic activity of the biofilm, a restorative material or a sealant can be placed to block access of the biofilm to the oral environment in order to prevent caries progress. The prevention of dental caries based on common risk-factor strategies (diet and hygiene) should be supplemented by more disease-specific policies such as rational use of fluoride, and evidence-based dental health care.

Health promotion and dental caries

Directory of Open Access Journals (Sweden)

Marisa Maltz

2010-01-01

Full Text Available The central idea of the Brazilian health system is to prevent the establishment of disease or detect it as early as possible. Prevention and treatment of dental caries are related to behavioral factors, including dietary and oral hygiene habits, which are related to many chronic diseases. Dental health promotion therefore should be fully integrated into broadly based health-promoting strategies and actions such as food and health policies, and general hygiene (including oral hygiene, among others. For decades, a linear relationship between sugar consumption and caries has been observed. Recent data has indicated that this relationship is not as strong as it used to be before the widespread use of fluoride. However, diet is still a key factor acting in the carious process. Oral hygiene is a major aspect when it comes to caries, since dental biofilm is its etiological factor. Oral hygiene procedures are effective in controlling dental caries, especially if plaque removal is performed adequately and associated with fluoride. An alternative to a more efficient biofilm control in occlusal areas is the use of dental sealants, which are only indicated for caries-active individuals. If a cavity is formed as a consequence of the metabolic activity of the biofilm, a restorative material or a sealant can be placed to block access of the biofilm to the oral environment in order to prevent caries progress. The prevention of dental caries based on common risk-factor strategies (diet and hygiene should be supplemented by more disease-specific policies such as rational use of fluoride, and evidence-based dental health care.

A cross-sectional survey of dental caries, oral hygiene, and Helicobacter pylori infection in adults.

Science.gov (United States)

Liu, Peng; Yue, Ji; Han, Shufang; Deng, Tianzheng; Fu, Chongjian; Zhu, Guoxiong; Chen, Dong

2013-07-01

We explored the epidemiological risk factors for dental caries to help explain differences in the prevalence of adult dental caries. We examined 841 people for the presence of Helicobacter pylori in their dental plaque and for dental caries. Of the 841 subjects, 574 (68.25%) were infected with H pylori, and 516 (61.36%) were diagnosed with dental caries. Among the 574 subjects with H pylori, the prevalence of dental caries was 73.52% (422/574), while the prevalence among the 267 cases without H pylori was 35.21% (94/267). A correlation existed between the presence of H pylori and the occurrence of dental caries (χ(2) = 112.8, P pylori had a higher mean dental plaque index than those without. In conclusion, H pylori infection in the oral cavity is associated with dental caries and poor dental hygiene.

1.3 GHz superconducting RF cavity program at Fermilab

Energy Technology Data Exchange (ETDEWEB)

Ginsburg, C.M.; Arkan, T.; Barbanotti, S.; Carter, H.; Champion, M.; Cooley, L.; Cooper, C.; Foley, M.; Ge, M.; Grimm, C.; Harms, E.; /Fermilab

2011-03-01

At Fermilab, 9-cell 1.3 GHz superconducting RF (SRF) cavities are prepared, qualified, and assembled into cryomodules (CMs) for Project X, an International Linear Collider (ILC), or other future projects. The 1.3 GHz SRF cavity program includes targeted R&D on 1-cell 1.3 GHz cavities for cavity performance improvement. Production cavity qualification includes cavity inspection, surface processing, clean assembly, and one or more cryogenic low-power CW qualification tests which typically include performance diagnostics. Qualified cavities are welded into helium vessels and are cryogenically tested with pulsed high-power. Well performing cavities are assembled into cryomodules for pulsed high-power testing in a cryomodule test facility, and possible installation into a beamline. The overall goals of the 1.3 GHz SRF cavity program, supporting facilities, and accomplishments are described.

Dental Mold: A Novel Formulation to Treat Common Dental Disorders

OpenAIRE

Ghosh, Soma; Roy, Gopa; Mukherjee, Biswajit

2009-01-01

Oral administration of antibiotics to treat dental problems mostly yields slow actions due to slow onset and hepatic “first-pass.” Again, commonly used dental paints are generally washed out by saliva within few hours of application. To overcome the challenges, polymeric molds to be placed on an affected tooth (during carries and gum problems) were prepared and evaluated in vitro for sustained drug release for prolonged local action. Here, amoxicillin trihydrate and lidocaine hydrochloride we...

[Bacteriological study of oral cavity of people of Mexican origin to determine etiology agents of human infections in hand bite].

Science.gov (United States)

Cañedo-Guzmán, Cristhyan Baruch; Espinosa-Gutiérrez, Alejandro; Guzmán-Murillo, María Antonia

2013-01-01

Hand infections secondary to human bites often leave serious consequences on the functioning of the hand. Such infections are caused by different bacteria. Most bacteriological studies have been made to people of Anglo-Saxon origin or descent, and based on these findings; provide treatment to patients of different origins which may not always be as effective. Descriptive, internal stratified 17 patients were isolated samples of oral cavity and dental plaque bacterial species to identify and define the possible treatment according to the species identified. Microorganisms were isolated Gram (+) and Gram (-) belonging to the normal flora of the oral cavity and dental plaque in all the cases studied, presenting a variable number of microorganisms according to age but not by sex. The group of Gram-positive bacteria isolated showed sensitivity to: erythromycin, chloramphenicol and ciprofloxacin. In the group of Gram negative: kanamycin, amoxicillin + clavulanic acid, ciprofloxacin and norfloxacin, E. Corrodens sensitive to the group of quinolones as ciprofloxacin, norfloxacin as well as ceftriaxone and cefoperazone sulbactam. The bacterial species that are commonly found in normal flora of the oral cavity and dental plaque may be potential pathogens in a hand injury where to find the appropriate conditions for their development.

Biocompatibility of dental alloys

Energy Technology Data Exchange (ETDEWEB)

Braemer, W. [Heraeus Kulzer GmbH and Co. KG, Hanau (Germany)

2001-10-01

Modern dental alloys have been used for 50 years to produce prosthetic dental restorations. Generally, the crowns and frames of a prosthesis are prepared in dental alloys, and then veneered by feldspar ceramics or composites. In use, the alloys are exposed to the corrosive influence of saliva and bacteria. Metallic dental materials can be classified as precious and non-precious alloys. Precious alloys consist of gold, platinum, and small amounts of non-precious components such as copper, tin, or zinc. The non-precious alloys are based on either nickel or cobalt, alloyed with chrome, molybdenum, manganese, etc. Titanium is used as Grade 2 quality for dental purposes. As well as the dental casting alloys, high purity electroplated gold (99.8 wt.-%) is used in dental technology. This review discusses the corrosion behavior of metallic dental materials with saliva in ''in vitro'' tests and the influence of alloy components on bacteria (Lactobacillus casei and Streptococcus mutans). The test results show that alloys with high gold content, cobalt-based alloys, titanium, and electroplated gold are suitable for use as dental materials. (orig.)

Vibro-acoustic and nonlinear analysis of cadavric femoral bone impaction in cavity preparations

Directory of Open Access Journals (Sweden)

Oberst Sebastian

2018-01-01

Tikhonov regularisation, as inverse deconvolution technique, is applied to calculate the acoustic transfer functions from the acoustic responses and their mechanical impacts. The extracted spectra highlight that system characteristics altered during the cavity preparation process: in the high-frequency range the number of resonances increased with impacts and broach size. By applying nonlinear time series analysis the system dynamics increase in complexity and demand for a larger minimum embedding dimension. The growing number of resonances with similar level of the transfer function indicates a higher propensity to dissipate energy over sound; the change in embedding dimension indicates a decrease in linearity. The spectral changes as well as the altered dimension requirements indicate either an improved coupling between the bone and the broach or the onset of micro-fractures caused by growing stress levels within the bone.

Influence of dental filling material type on the concentration of interleukin 9 in the samples of gingival crevicular fluid

Directory of Open Access Journals (Sweden)

Stefanović Vladimir

2016-01-01

Full Text Available Background/Aim. Several cytokines and lymphokines (IL1β, ENA78, IL6, TNFα, IL8 and S100A8 are expressed during dental pulp inflammation. Analysis of gingival crevicu-lar fluid (GCF offers a non-invasive means of studying gen-eral host response in oral cavity. Although GCF levels of various mediators could reflect the state of inflammation both in dental pulp and gingiva adjacent to a tooth, GCF samples of those without significant gingivitis could be inter-preted as reflection of pulpal process. The aim of this study was to investigate IL9 GCF values in patients with dental car-ies and to assess possible influence of various dental fillings materials on local IL9 production. Methods. The study group included 90 patients, aged 18–70, with inclusion and exclusion criteria in the prospective clinical study. Of the 6 types of material used for the restoration of prepared cavities, 3 were intended for temporary and 3 for definitive restora-tion. According to dental fillings weight, all the participants were divided into 3 groups: those with fillings lighter than 0.50 g, those with 0.50–1.00 g, and those with fillings heavier than 1.00 g. Samples were taken from gingival sulcus using the filter paper technique. Clinical parameters were deter-mined by bleeding index, plaque index (Silness-Lou, 0–3, gingival index (0–3, and gingival sulcus depth. Cytokine con-centrations were assessed using commercially available cy-tomix. Results. According to the weight of dental fillings, there was a clear decreament trend of IL9 values meaning that dental defects greater than 1.00 g of dental filling were associated with lower GCF IL9 concentration. The IL9 val-ues correlated with the degree of gingival index and depth of gingival sulcus, being higher with more advanced gingivitis and more pronounced anatomical changes in the tooth edge. Different filling materials exerted various local IL9 responses. Zink polycarbonate cement and amalgam fillings induced

Ancient DNA analysis of dental calculus.

Science.gov (United States)

Weyrich, Laura S; Dobney, Keith; Cooper, Alan

2015-02-01

Dental calculus (calcified tartar or plaque) is today widespread on modern human teeth around the world. A combination of soft starchy foods, changing acidity of the oral environment, genetic pre-disposition, and the absence of dental hygiene all lead to the build-up of microorganisms and food debris on the tooth crown, which eventually calcifies through a complex process of mineralisation. Millions of oral microbes are trapped and preserved within this mineralised matrix, including pathogens associated with the oral cavity and airways, masticated food debris, and other types of extraneous particles that enter the mouth. As a result, archaeologists and anthropologists are increasingly using ancient human dental calculus to explore broad aspects of past human diet and health. Most recently, high-throughput DNA sequencing of ancient dental calculus has provided valuable insights into the evolution of the oral microbiome and shed new light on the impacts of some of the major biocultural transitions on human health throughout history and prehistory. Here, we provide a brief historical overview of archaeological dental calculus research, and discuss the current approaches to ancient DNA sampling and sequencing. Novel applications of ancient DNA from dental calculus are discussed, highlighting the considerable scope of this new research field for evolutionary biology and modern medicine. Copyright © 2014 Elsevier Ltd. All rights reserved.

Helicobacter pylori detection in gastric biopsies, saliva and dental plaque of Brazilian dyspeptic patients

Directory of Open Access Journals (Sweden)

Lucas Trevizani Rasmussen

2010-05-01

Full Text Available Helicobacter pylori is an important human pathogen that causes chronic gastritis and is associated with the development of peptic ulcer disease and gastric malignancies. The oral cavity has been implicated as a potential H. pylori reservoir and may therefore be involved in the reinfection of the stomach, which can sometimes occur following treatment of an H. pylori infection. The objectives of this paper were (i to determine the presence of H. pylori in the oral cavity and (ii to examine the relationship between oral H. pylori and subsequent gastritis. Gastric biopsies, saliva samples and dental plaques were obtained from 78 dyspeptic adults. DNA was extracted and evaluated for the presence of H. pylori using polymerase chain reaction and Southern blotting methods. Persons with gastritis were frequently positive for H. pylori in their stomachs (p < 0.0001 and there was a statistically significant correlation between the presence of H. pylori in gastric biopsies and the oral cavity (p < 0.0001. Our results suggest a relationship between gastric infection and the presence of this bacterium in the oral cavity. Despite this, H. pylori were present in the oral cavity with variable distribution between saliva and dental plaques, suggesting the existence of a reservoir for the species and a potential association with gastric reinfection.

[Influence of the fluoride releasing dental materials on the bacterial flora of dental plaque].

Science.gov (United States)

Płuciennik, Małgorzata; Sakowska, Danuta; Krzemiński, Zbigniew; Piatowska, Danuta

2008-01-01

The assessment of influence of silver-free, fluor releasing dental materials on dental plaque bacteria quantity. 17 patients were included into the study. 51 restorations were placed following manufacturers recommendations. Following materials were used: conventional glassionomer Ketac-Molar ESPE, resin modified glassionomer Fuji II LC GC and fluor containing composite Charisma Heraeus Kulzer Class V restorations were placed in following teeth of upper and lower jaw: canines, first bicuspids, second bicuspids. Sound enamel was a control. After 10 weeks the 72 hours old dental plaque was collected from surface of restorations and control using sterile probe. Total amount of 68 dental plaques were investigated. Each plaque was placed on scaled and sterile aluminum foil. The moist weight of dental plaque was scaled. Dental plaque was moved into 7 ml 0.85% NaCl solution reduced by cystein chlorine hydrogen and disintegrated by ultrasounds (power:100 Watt, wave amplitude: 5 micorm). The suspension of dental plaque was serially diluted from 10(-4) to 10(-5) in sterile 0,85% NaCl solution, and seeded with amount of 0.1 ml on appropriate base. In dental plaque trials the amount of cariogenic bacteria was calculated--Streptococcus mutans, Streptococcus, Lactobacillus, Veillonella and Neisseria, and also total amount of aerobic and anaerobic bacteria was measured. Microbiologic studies were performed in Institute of Microbiology, Medical University, Łódź. Statistical analysis of collected data was accomplished. In 72 hours old dental plaques collected from the surfaces of Ketac -Molar, Fuji II LC, Charisma after 10 weeks since being placed into the class V cavity, results show no statistically significant differences in the amount of Streptococcus mutans, Streptococcus spp., Lactobacillus spp., Veillonella spp., Neisseria spp, in total amount of aerobic and anaerobic bacteria and in the quantity proportion of Streptococcus mutans versus Streptococcus spp. in comparison

Dental calculus: the calcified biofilm and its role in disease development.

Science.gov (United States)

Akcalı, Aliye; Lang, Niklaus P

2018-02-01

Dental calculus represents the first fossilized record of bacterial communities as a testimony of evolutionary biology. The development of dental calculus is a dynamic process that starts with a nonmineralized biofilm which eventually calcifies. Nonmineralized dental biofilm entraps particles from the oral cavity, including large amounts of oral bacteria, human proteins, viruses and food remnants, and preserves their DNA. The process of mineralization involves metabolic activities of the bacterial colonies and strengthens the attachment of nonmineralized biofilms to the tooth surface. From a clinical point of view, dental calculus always harbors a living, nonmineralized biofilm, jeopardizing the integrity of the dento-gingival or implanto-mucosal unit. This narrative review presents a brief historical overview of dental calculus formation and its clinical relevance in modern periodontal practice. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

RF BREAKDOWN STUDIES USING PRESSURIZED CAVITIES

Energy Technology Data Exchange (ETDEWEB)

Johnson, Rolland

2014-09-21

Many present and future particle accelerators are limited by the maximum electric gradient and peak surface fields that can be realized in RF cavities. Despite considerable effort, a comprehensive theory of RF breakdown has not been achieved and mitigation techniques to improve practical maximum accelerating gradients have had only limited success. Part of the problem is that RF breakdown in an evacuated cavity involves a complex mixture of effects, which include the geometry, metallurgy, and surface preparation of the accelerating structures and the make-up and pressure of the residual gas in which plasmas form. Studies showed that high gradients can be achieved quickly in 805 MHz RF cavities pressurized with dense hydrogen gas, as needed for muon cooling channels, without the need for long conditioning times, even in the presence of strong external magnetic fields. This positive result was expected because the dense gas can practically eliminate dark currents and multipacting. In this project we used this high pressure technique to suppress effects of residual vacuum and geometry that are found in evacuated cavities in order to isolate and study the role of the metallic surfaces in RF cavity breakdown as a function of magnetic field, frequency, and surface preparation. One of the interesting and useful outcomes of this project was the unanticipated collaborations with LANL and Fermilab that led to new insights as to the operation of evacuated normal-conducting RF cavities in high external magnetic fields. Other accomplishments included: (1) RF breakdown experiments to test the effects of SF6 dopant in H2 and He gases with Sn, Al, and Cu electrodes were carried out in an 805 MHz cavity and compared to calculations and computer simulations. The heavy corrosion caused by the SF6 components led to the suggestion that a small admixture of oxygen, instead of SF6, to the hydrogen would allow the same advantages without the corrosion in a practical muon beam line. (2) A

Precise femtosecond laser ablation of dental hard tissue: preliminary investigation on adequate laser parameters

International Nuclear Information System (INIS)

Hikov, Todor; Pecheva, Emilia; Petrov, Todor; Montgomery, Paul; Antoni, Frederic; Leong-Hoi, Audrey

2017-01-01

This work aims at evaluating the possibility of introducing state-of-the-art commercial femtosecond laser system in restorative dentistry by maintaining well-known benefits of lasers for caries removal, but also in overcoming disadvantages such as thermal damage of irradiated substrate. Femtosecond ablation of dental hard tissue is investigated by changing the irradiation parameters (pulsed laser energy, scanning speed and pulse repetition rate), assessed for enamel and dentin. The femtosecond laser system used in this work may be suitable for cavity preparation in dentin and enamel, due to the expected effective ablation and low temperature increase when using ultra short laser pulses. If adequate laser parameters are selected, this system seems to be promising for promoting a laser-assisted, minimally invasive approach in restorative dentistry. (paper)

Acquiring psychomotor skills in operative dentistry: do innate ability and motivation matter?

Science.gov (United States)

Suksudaj, N; Townsend, G C; Kaidonis, J; Lekkas, D; Winning, T A

2012-02-01

The acquisition of psychomotor skills is a key competence in the practice of dentistry, and innate abilities and motivation have been shown to influence motor performance. However, the explicit integration of these factors into the design of research projects about skill acquisition in dentistry has been limited. Therefore, the purpose of this study was to provide a comprehensive analysis of how dental students' abilities and motivation affected their performance in an operative task. A longitudinal study with two cohorts of dental students was conducted in laboratory classes forming part of an operative technique course. A range of standardised psychometric tests was used to assess different abilities before completing a cavity preparation on Frasaco teeth. This was followed immediately by completion of an Intrinsic Motivation Inventory. Low but statistically significant correlations (P<0.05) were found between dental performance and psychomotor ability (r=0.22), and also dental performance and motivation (r=0.19). A significant difference (P<0.05) was found in the grades obtained for the cavity preparation exercise in one cohort between students with higher levels of psychomotor ability compared with those with lower levels (Tracing scores) (P<0.05). No significant differences in grades obtained for the cavity preparation exercise were found between students with higher and lower levels of motivation. Both innate psychomotor ability and motivation showed only weak positive associations with dental performance on cavity preparation exercises. Our study suggests that student-related factors only provide limited information to explain differences in performance or to be useful as specific predictors of future performance by individuals. © 2011 John Wiley & Sons A/S.

Assessment of the changes in the stress-related salivary cortisol levels to the various dental procedures in children

Directory of Open Access Journals (Sweden)

Sharmila J Patil

2015-01-01

Full Text Available Background: Fear and pain are the factors producing stress and there is evidence that dental fear acquired in childhood may persist to influence adult behavior. Dental treatment is often considered as anxiety producing and stressful. Aim: To assess the levels of stress displayed by the healthy children undergoing routine dental procedures like oral examination, restoration, and extraction by analyzing salivary levels of cortisol before, during, and after the procedures. Materials and Methods: Twenty healthy children aged between 4 and 8 years having their first dental visit and requiring at least one restoration and one extraction were selected. In each patient, three procedures were carried out: (i Routine dental examination, (ii restoration, and (iii extraction. Unstimulated salivary samples were collected 10 min before, during the procedure, and 30 min after each procedure at three different visits for comparison of cortisol production in response to anxiety and stress over time. Total 180 samples were collected to determine salivary cortisol levels using UBI-MAGIWEL TM kit and the readings were noted. Statistical Analysis Used: Statistical Package for Social Sciences (SPSS software with paired t-test, two independent sample t-tests, and analysis of variance (ANOVA were used to analyze the findings. Results: A correlation between salivary cortisol and stress in dental procedure was noticed. Cavity preparation is more stressful procedure in children, so alternative methods can be used in anxious children. Stress associated with extraction persists to a postoperative period. No correlation exists in between Corah′s anxiety scale and salivary cortisol.

MARKETING STUDIES OF LOCAL MARKET OF DRUGS WHICH ARE APPLIED FOR PREVENTION AND TREATMENT OF ORAL CAVITY DISEASES

Directory of Open Access Journals (Sweden)

O. A. Tsarakhov

2015-01-01

Full Text Available Stomatological market has actively developed recent years. Domestic experts received an access to contemporary technologies of dental diseases treatment in the world. This conditioned the appearance of new drugs and parapharmaceutical products applied in dental practice on the pharmaceutical market. In this connection, study of these drugs market, their price policy, demand and supply. Assortment of parapharmaceutical products applied in dental practice for oral cavity hygiene is represented mainly by liquid forms, such as mouth rinse, balms, elixirs, and a special place is occupied by toothpastes. Their assortment amounts to more than 700 types. Drugs, applied in dental practice are represented by the following groups: anti-inflammatory, antimicrobial, antiallergenic, anesthetics, drugs which stimulate tissues regeneration, fluoric drugs. The purpose of this study was the analysis of regional pharmaceutical market assortment, which offers parapharmaceutical goods and drugs for prevention and treatment of oral cavity diseases to the stomatological establishments. Pharmaceutical market of the Republic of North Ossetia – Alania is represented by a wide range of drugs for dental diseases treatment. This group is represented in the assortment of practically all distributors. The drugs for dental diseases treatment is not only supplied by domestic producers but also go from pharmaceutical companies of 29 foreign countries, which influences positively on the state of drug therapy of paradontum in the region.

A Review on Dental Amalgam Corrosion and Its Consequences

Directory of Open Access Journals (Sweden)

M Fathi

2004-02-01

Full Text Available Dental amalgam is still the most useful restorative material for posterior teeth and has been successfully used for over a century. Dental amalgam has been widely used as a direct filling material due to its favorable mechanical properties as well as low cost and easy placement. However, the mercury it contains raises concerns about its biological toxicity and environmental hazard. Although in use for more than 150 years, dental amalgam has always been suspected more or less vigorously due to its alleged health hazard. Amalgam restorations often tarnish and corrode in oral environment. Corrosion of dental amalgam can cause galvanic action. Ion release as a result of corrosion is most important. Humans are exposed to mercury and other main dental metals via vapor or corrosion products in swallowed saliva and also direct absorption into blood from oral mucosa. During recent decades the use of dental amalgam has been discussed with respect to potential toxic effects of mercury components. In this article, the mechanisms of dental amalgam corrosion are described and results of researches are reviewed. It finally covers the corrosion of amalgams since this is the means by which metals, including mercury, can be released within oral cavity. Keywords: Dental amalgam, Amalgam corrosion, Biocompatibility, Mercury release, Amalgam restoration

Superconducting cavity driving with FPGA controller

Energy Technology Data Exchange (ETDEWEB)

Czarski, T.; Koprek, W.; Pozniak, K.T.; Romaniuk, R.S. [Warsaw Univ. of Technology (Poland); Simrock, S.; Brand, A. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Chase, B.; Carcagno, R.; Cancelo, G. [Fermi National Accelerator Lab., Batavia, IL (United States); Koeth, T.W. [Rutgers - the State Univ. of New Jersey, NJ (United States)

2006-07-01

The digital control of several superconducting cavities for a linear accelerator is presented. The laboratory setup of the CHECHIA cavity and ACC1 module of the VU-FEL TTF in DESY-Hamburg have both been driven by a Field Programmable Gate Array (FPGA) based system. Additionally, a single 9-cell TESLA Superconducting cavity of the FNPL Photo Injector at FERMILAB has been remotely controlled from WUT-ISE laboratory with the support of the DESY team using the same FPGA control system. These experiments focused attention on the general recognition of the cavity features and projected control methods. An electrical model of the resonator was taken as a starting point. Calibration of the signal path is considered key in preparation for the efficient driving of a cavity. Identification of the resonator parameters has been proven to be a successful approach in achieving required performance; i.e. driving on resonance during filling and field stabilization during flattop time while requiring reasonable levels of power consumption. Feed-forward and feedback modes were successfully applied in operating the cavities. Representative results of the experiments are presented for different levels of the cavity field gradient. (orig.)

Superconducting cavity driving with FPGA controller

International Nuclear Information System (INIS)

Czarski, T.; Koprek, W.; Pozniak, K.T.; Romaniuk, R.S.; Simrock, S.; Brand, A.; Chase, B.; Carcagno, R.; Cancelo, G.; Koeth, T.W.

2006-01-01

The digital control of several superconducting cavities for a linear accelerator is presented. The laboratory setup of the CHECHIA cavity and ACC1 module of the VU-FEL TTF in DESY-Hamburg have both been driven by a Field Programmable Gate Array (FPGA) based system. Additionally, a single 9-cell TESLA Superconducting cavity of the FNPL Photo Injector at FERMILAB has been remotely controlled from WUT-ISE laboratory with the support of the DESY team using the same FPGA control system. These experiments focused attention on the general recognition of the cavity features and projected control methods. An electrical model of the resonator was taken as a starting point. Calibration of the signal path is considered key in preparation for the efficient driving of a cavity. Identification of the resonator parameters has been proven to be a successful approach in achieving required performance; i.e. driving on resonance during filling and field stabilization during flattop time while requiring reasonable levels of power consumption. Feed-forward and feedback modes were successfully applied in operating the cavities. Representative results of the experiments are presented for different levels of the cavity field gradient. (orig.)

The Validity of Using E4D Compare's "% Comparison" to Assess Crown Preparations in Preclinical Dental Education.

Science.gov (United States)

Callan, Richard S; Haywood, Van B; Cooper, Jeril R; Furness, Alan R; Looney, Stephen W

2015-12-01

When a dental school is deciding which technology to introduce into a curriculum, it is important to identify the educational goals for the system. The authors' primary goal for the use of a computer-aided resource was to offer students another way to assess their performance, to enhance their learning, and to potentially decrease their learning curve in the preclinical environment prior to using the technique in clinical patient care. The aim of this study was to examine the validity of the "% Comparison" numbers derived from the E4D Compare software program. Three practical examinations were administered to a class of 82 students at one U.S. dental school over a six-week period. The grading of the practical examinations was performed with individual faculty members being responsible for evaluating specific aspects of each preparation. A digital image of each student's practical examination tooth was then obtained and compared to the digital image of an ideal preparation. The preparations were compared, and the "% Comparison" was recorded at five tolerance levels. Spearman's correlation coefficient (SCC) was used to measure the agreement in rankings between the faculty scores on practical exams 1-3 and the scores obtained using E4D Compare at the different tolerance levels. The SCC values for practical exams 2 and 3 were all between 0.2 and 0.4; for practical exam 1, the SCC values ranged from 0.47 to 0.56. There was no correlation between the faculty scores and the numbers given by the "% Comparison" of the software.

Radiation therapy of the oral cavity: sequelae and management, part 2

International Nuclear Information System (INIS)

Beumer, J.; Curtis, T.; Harrison, R.E.

1979-01-01

This is the concluding portion of a two-part series dealing with the effects and manifestations in the oral cavity of radiation therapy of head and neck tumors. Preradiation and postradiation extractions in dentulous patients, as well as dental maintenance of such patients (including fluoride treatments follow-up, and restorative care), are discussed. Guidelines for the dental management of edentulous patients are also presented at length (this section covers risk of bone necrosis, soft liners, timing of denture placement, dentures and preexisting bone necrosis, soft-tissue necrosis and dentures, morbidity, and prosthodontic procedures). The article concludes with a brief discussion of osteoradionecrosis and soft-tissue necrosis

Oral and dental health status in patients with primary antibody deficiencies.

Science.gov (United States)

Meighani, Ghasem; Aghamohammadi, Asghar; Javanbakht, Honarmand; Abolhassani, Hassan; Nikayin, Sina; Jafari, Seyed Mehryar; Ghandehari Motlagh, Mehdi; Shamshiri, Ahmad Reza; Rezaei, Nima

2011-12-01

Primary antibody deficiencies (PAD) are a group of immune system disorders, associated with decreased levels of secretory and protective immunoglobulins. Because of the important role of immunoglobulins in the protection of oral cavity, patients with PADs are more susceptible to dental caries or oral manifestations. This study was performed to investigate the oral and dental manifestations of PADs patients. In this study, 33 patients with PADs (21 common variable immunodeficiency, 8 X-linked agammaglobulinemia and 4 hyper IgM syndrome) and 66 controls were examined; the number of decayed, missed and filled teeth (DMFT) were investigated. Aphthous was the most frequent manifestation in PADs patients (38.7%), which was significantly 16.7% higher than the controls (p=0.03). The patients with PADs showed significantly higher presentation of other oral and dental manifestations, including herpes sores, candidiasis tonsillitis, gingivitis, calculus, enamel hypoplasia and other ulcerations. The mean DMFT scores were 6.15±3.6 and 1.93±0.4 in PADs patients and controls, respectively (p<0.001). Although the patients with common variable immunodeficiency had higher means of DMFT in comparison with other groups of PADs, this difference was not statistically significant. This study showed significantly higher frequency of oral and dental manifestations in the patients with PADs compared to controls. Therefore, regular examination of oral cavity could be suggested in this group of immunodeficient patients.

Unusual extensive physiologic melanin pigmentation of the oral cavity: A clinical presentation

Directory of Open Access Journals (Sweden)

K Mallikarjuna

2013-01-01

Full Text Available Pigmented lesions are commonly found in the oral cavity. Oral pigmentations may be physiological or pathological in nature. It may represent as a localized anomaly of limited significance or the presentation of potentially life threatening multisystem disease. Oral pigmentation has a multifactorial etiology. Most of the oral pigmentations are physiologic. Evaluation of a patient with pigmented lesions should include a full medical and dental history, extraoral and intraoral examinations. In this article, we report a case of extensive physiologic pigmentation of the oral cavity in a 12 year old female patient, posing a diagnostic challenge.

Bacterial sex in dental plaque.

Science.gov (United States)

Olsen, Ingar; Tribble, Gena D; Fiehn, Nils-Erik; Wang, Bing-Yan

2013-01-01

Genes are transferred between bacteria in dental plaque by transduction, conjugation, and transformation. Membrane vesicles can also provide a mechanism for horizontal gene transfer. DNA transfer is considered bacterial sex, but the transfer is not parallel to processes that we associate with sex in higher organisms. Several examples of bacterial gene transfer in the oral cavity are given in this review. How frequently this occurs in dental plaque is not clear, but evidence suggests that it affects a number of the major genera present. It has been estimated that new sequences in genomes established through horizontal gene transfer can constitute up to 30% of bacterial genomes. Gene transfer can be both inter- and intrageneric, and it can also affect transient organisms. The transferred DNA can be integrated or recombined in the recipient's chromosome or remain as an extrachromosomal inheritable element. This can make dental plaque a reservoir for antimicrobial resistance genes. The ability to transfer DNA is important for bacteria, making them better adapted to the harsh environment of the human mouth, and promoting their survival, virulence, and pathogenicity.

Bacterial sex in dental plaque

Directory of Open Access Journals (Sweden)

Ingar Olsen

2013-06-01

Full Text Available Genes are transferred between bacteria in dental plaque by transduction, conjugation, and transformation. Membrane vesicles can also provide a mechanism for horizontal gene transfer. DNA transfer is considered bacterial sex, but the transfer is not parallel to processes that we associate with sex in higher organisms. Several examples of bacterial gene transfer in the oral cavity are given in this review. How frequently this occurs in dental plaque is not clear, but evidence suggests that it affects a number of the major genera present. It has been estimated that new sequences in genomes established through horizontal gene transfer can constitute up to 30% of bacterial genomes. Gene transfer can be both inter- and intrageneric, and it can also affect transient organisms. The transferred DNA can be integrated or recombined in the recipient's chromosome or remain as an extrachromosomal inheritable element. This can make dental plaque a reservoir for antimicrobial resistance genes. The ability to transfer DNA is important for bacteria, making them better adapted to the harsh environment of the human mouth, and promoting their survival, virulence, and pathogenicity.

Advocacy for the Provision of Dental Hygiene Services Within the Hospital Setting: Development of a Dental Hygiene Student Rotation.

Science.gov (United States)

Juhl, Jacqueline A; Stedman, Lynn

2016-06-01

Educational preparation of dental hygiene students for hospital-based practice, and advocacy efforts promote inclusion of dental hygienists within hospital-based interdisciplinary health care teams. Although the value of attending to the oral care needs of patients in critical care units has been recognized, the potential impact of optimal oral health care for the general hospital population is now gaining attention. This article describes a hospital-based educational experience for dental hygiene students and provides advocacy strategies for inclusion of dental hygienists within the hospital interdisciplinary team. The dental hygienist authors, both educators committed to evidence-based oral health care and the profession of dental hygiene, studied hospital health care and recognized a critical void in oral health care provision within that setting. They collaboratively developed and implemented a hospital-based rotation within the curriculum of a dental hygiene educational program and used advocacy skills to encourage hospital administrators to include a dental hygiene presence within hospital-based care teams. Hospital-based dental hygiene practice, as part of interprofessional health care delivery, has the potential to improve patient well-being, shorten hospital stays, and provide fiscal savings for patients, institutions, and third party payers. Advocacy efforts can promote dental hygienists as members of hospital-based health care teams. Further research is needed to document: (1) patient outcomes resulting from optimal oral care provision in hospitals; (2) best ways to prepare dental hygienists for career opportunities within hospitals and other similar health care settings; and (3) most effective advocacy strategies to promote inclusion of dental hygienists within care teams. Copyright © 2016 Elsevier Inc. All rights reserved.

Electronic cigarette explosions involving the oral cavity.

Science.gov (United States)

Harrison, Rebecca; Hicklin, David

2016-11-01

The use of electronic cigarettes (e-cigarettes) is a rapidly growing trend throughout the United States. E-cigarettes have been linked to the risk of causing explosion and fire. Data are limited on the associated health hazards of e-cigarette use, particularly long-term effects, and available information often presents conflicting conclusions. In addition, an e-cigarette explosion and fire can pose a unique treatment challenge to the dental care provider because the oral cavity may be affected heavily. In this particular case, the patient's injuries included intraoral burns, luxation injuries, and alveolar fractures. This case report aims to help clinicians gain an increased knowledge about e-cigarette design, use, and risks; discuss the risk of spontaneous failure and explosion of e-cigarettes with patients; and understand the treatment challenges posed by an e-cigarette explosion. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

Fiber optic-based optical coherence tomography (OCT) for dental applications

Science.gov (United States)

Everett, Matthew J.; Colston, Bill W., Jr.; Da Silva, Luiz B.; Otis, Linda L.

1998-09-01

We have developed a hand-held fiber optic based optical coherence tomography (OCT) system for scanning of the oral cavity. We have produced, using this scanning device, in vivo cross-sectional images of hard and soft dental tissues in human volunteers. Clinically relevant anatomical structures, including the gingival margin, periodontal sulcus, and dento- enamel junction, were visible in all the images. The cemento- enamel junction and the alveolar bone were identified in approximately two thirds of the images. These images represent, or our knowledge, the first in vivo OCT images of human dental tissue.

Fiber optic based optical coherence tomography (OCT) for dental applications

Energy Technology Data Exchange (ETDEWEB)

Everett, M. J., LLNL

1998-06-02

We have developed a hand-held fiber optic based optical coherence tomography (OCT) system for scanning of the oral cavity We have produced, using this scanning device, in viva cross-sectional images of hard and soft dental tissues in human volunteers Clinically relevant anatomical structures, including the gingival margin, periodontal sulcus, and dento-enamel junction, were visible in all the images The dento-enamel junction and the alveolar bone were identifiable in approximately two thirds of the images These images represent, to our knowledge, the first in viva OCT images of human dental tissue.

Dental neglect among college going adolescents in Virajpet, India

Directory of Open Access Journals (Sweden)

Sunil Lingaraj Ajagannanavar

2014-01-01

Full Text Available Introduction: Dental neglect (DN has been defined as behavior and attitudes which are likely to have detrimental consequences for the individual′s oral health, or more specifically as failure to take precautions to maintain oral health, failure to obtain needed dental care, and physical neglect of the oral cavity. Aim: The aim was to assess the association of DN with dental caries and oral hygiene among adolescents in Virajpet, India. Materials and Methods: A total of six hundred adolescents aged 15-18 years were selected. DN was recorded using self-administered questionnaire. Oral health status was clinically assessed using simplified oral hygiene index (OHI-S and dental caries through dentition status as per WHO criteria. Results: The mean DN score for this population was 10.18. Sociodemographic variables and Dental Attendance pattern were significantly associated with DN. Mean decayed missing filled value and OHI-S values were also significantly associated with DN. Conclusion: The present study revealed that variations in DN exist in relation to sociodemographic characteristics and pattern of dental attendance. In addition, oral health status was significantly associated with DN among adolescents.

Cultivating professional responsibility in a dental hygiene curriculum.

Science.gov (United States)

Blue, Christine M

2013-08-01

To prepare dental hygienists for future roles in the health care system, dental hygiene education must prepare graduates with skills, ethics, and values that align with professional responsibility. The objective of this study was to determine the effectiveness of curricular changes designed to develop professional identity and responsibility over the entire span of the dental hygiene curriculum. Twenty-four dental hygiene students at the University of Minnesota were surveyed about their attitudes toward access to dental care, society's and health professionals' responsibility to care for the underserved, and their personal efficacy to provide care for the underserved. Surveys were conducted at three time points in the curriculum. The Attitudes Toward Health Care instrument adapted by Holtzman for dental use was used to survey the students. The findings indicate that this institution's curricular changes were effective in cultivating professional responsibility among these students. Their attitude scores increased across the six-semester curriculum, and students in their last semester of the program believed that all individuals have a right to dental care and that society has an obligation to provide dental care. These students' sense of obligation to care for the needy became stronger and their perceptions of their own ability to impact the community and act as an agent of change also increased.

Pathogens and host immunity in the ancient human oral cavity

Science.gov (United States)

Warinner, Christina; Matias Rodrigues, João F.; Vyas, Rounak; Trachsel, Christian; Shved, Natallia; Grossmann, Jonas; Radini, Anita; Hancock, Y.; Tito, Raul Y.; Fiddyment, Sarah; Speller, Camilla; Hendy, Jessica; Charlton, Sophy; Luder, Hans Ulrich; Salazar-García, Domingo C.; Eppler, Elisabeth; Seiler, Roger; Hansen, Lars; Samaniego Castruita, José Alfredo; Barkow-Oesterreicher, Simon; Teoh, Kai Yik; Kelstrup, Christian; Olsen, Jesper V.; Nanni, Paolo; Kawai, Toshihisa; Willerslev, Eske; von Mering, Christian; Lewis, Cecil M.; Collins, Matthew J.; Gilbert, M. Thomas P.; Rühli, Frank; Cappellini, Enrico

2014-01-01

Calcified dental plaque (dental calculus) preserves for millennia and entraps biomolecules from all domains of life and viruses. We report the first high-resolution taxonomic and protein functional characterization of the ancient oral microbiome and demonstrate that the oral cavity has long served as a reservoir for bacteria implicated in both local and systemic disease. We characterize: (i) the ancient oral microbiome in a diseased state, (ii) 40 opportunistic pathogens, (iii) the first evidence of ancient human-associated putative antibiotic resistance genes, (iv) a genome reconstruction of the periodontal pathogen Tannerella forsythia, (v) 239 bacterial and 43 human proteins, allowing confirmation of a long-term association between host immune factors, “red-complex” pathogens, and periodontal disease, and (vi) DNA sequences matching dietary sources. Directly datable and nearly ubiquitous, dental calculus permits the simultaneous investigation of pathogen activity, host immunity, and diet, thereby extending the direct investigation of common diseases into the human evolutionary past. PMID:24562188

Effect of the annealing temperature for the hydrogen Q-degradation on superconducting cavities

International Nuclear Information System (INIS)

Ota, Tomoko; Sukenobu, Satoru; Tanabe, Yoshio; Onishi, Yoshimichi; Noguchi, Shuichi; Ono, Masaaki; Saito, Kenji; Shishido, Toshio; Yamazaki, Yoshishige

1997-01-01

Hydrogen Q-degradation was studied in niobium superconducting cavities prepared by barrel polishing, and electropolishing without annealing, though a fast cooling down of cavities. Cavity performance with various annealing temperature were tested using a 1.3GHz single-cell cavity to compare the effects of annealing temperature for hydrogen Q-degradation. (author)

[Dental curriculum and team treatment concept

NARCIS (Netherlands)

Burgersdijk, R.C.W.; Kersten, H.

2001-01-01

The changing oral situation in the Netherlands, the upgrading of the dental hygienist training and the introduction of the bachelor and master degree in the Dutch higher education system asks for a new dental professional: the oral physician. To prepare the oral physician for his role as leader of a

Preparation of n-qubit Greenberger-Horne-Zeilinger entangled states in cavity QED: An approach with tolerance to nonidentical qubit-cavity coupling constants

International Nuclear Information System (INIS)

Yang Chuiping

2011-01-01

We propose a way for generating n-qubit Greenberger-Horne-Zeilinger (GHZ) entangled states with a three-level qubit system and (n-1) four-level qubit systems in a cavity. This proposal does not require identical qubit-cavity coupling constants and thus is tolerant to qubit-system parameter nonuniformity and nonexact placement of qubits in a cavity. The proposal does not require adjustment of the qubit-system level spacings during the entire operation. Moreover, it is shown that entanglement can be deterministically generated using this method and the operation time is independent of the number of qubits. The present proposal is quite general, which can be applied to physical systems such as various types of superconducting devices coupled to a resonator or atoms trapped in a cavity.

A low energy muon spin rotation and point contact tunneling study of niobium films prepared for superconducting cavities

Science.gov (United States)

Junginger, Tobias; Calatroni, S.; Sublet, A.; Terenziani, G.; Prokscha, T.; Salman, Z.; Suter, A.; Proslier, T.; Zasadzinski, J.

2017-12-01

Point contact tunneling and low energy muon spin rotation are used to probe, on the same samples, the surface superconducting properties of micrometer thick niobium films deposited onto copper substrates using different sputtering techniques: diode, dc magnetron and HIPIMS. The combined results are compared to radio-frequency tests performances of RF cavities made with the same processes. Degraded surface superconducting properties are found to correlate to lower quality factors and stronger Q-slope. In addition, both techniques find evidence for surface paramagnetism on all samples and particularly on Nb films prepared by HIPIMS.

Analysis of oral microbiota in children with dental caries by PCR-DGGE and barcoded pyrosequencing.

Science.gov (United States)

Ling, Zongxin; Kong, Jianming; Jia, Peng; Wei, Chaochun; Wang, Yuezhu; Pan, Zhiwen; Huang, Wujing; Li, Lanjuan; Chen, Hui; Xiang, Charlie

2010-10-01

Oral microbiota plays a vital role in maintaining the homeostasis of oral cavity. Dental caries are among the most common oral diseases in children and pathogenic bacteria contribute to the development of the disease. However, the overall structure of bacterial communities in the oral cavity from children with dental caries has not been explored deeply heretofore. We used high-throughput barcoded pyrosequencing and PCR-denaturing gradient gel electrophoresis (DGGE) to examine bacterial diversity of oral microbiota in saliva and supragingival plaques from 60 children aged 3 to 6 years old with and without dental caries from China. The multiplex barcoded pyrosequencing was performed in a single run, with multiple samples tagged uniquely by multiplex identifiers. As PCR-DGGE analysis is a conventional molecular ecological approach, this analysis was also performed on the same samples and the results of both approaches were compared. A total of 186,787 high-quality sequences were obtained for evaluating bacterial diversity and 41,905 unique sequences represented all phylotypes. We found that the oral microbiota in children was far more diverse than previous studies reported, and more than 200 genera belonging to ten phyla were found in the oral cavity. The phylotypes in saliva and supragingival plaques were significantly different and could be divided into two distinct clusters (p oral microbiome analyzed by PCR-DGGE and barcoded pyrosequencing was employed to cross validate the data sets. The genera of Streptococcus, Veillonella, Actinomyces, Granulicatella, Leptotrichia, and Thiomonas in plaques were significantly associated with dental caries (p oral microbiota allowed for a better understanding of oral microecosystem, and these pathogenic populations in plaque provide new insights into the etiology of dental caries and suggest new targets for interventions of the disease.

[Problem of motivation of the population to prevention and treatment dental diseases].

Science.gov (United States)

Kochlashvili, L Sh; Gogilashvili, K T; Gerzmava, O Kh

2012-10-01

Dental health is an integral part of a normal state of a human body and, first of all, depends on knowledge of the population of bases of individual hygiene of an oral cavity and ability to use them in practical life. Numerous researches indicate low level of knowledge of the population in questions of prevention of dental diseases and individual hygiene of an oral cavity that testifies to existence of problems in the organization of sanitary education. Existing practice of hygienic training and education, in a certain measure, lags behind modern requirements, and some questions demand specification and optimization. For efficiency of sanitary and preventive actions it is necessary to study character and motivation structure to prevention and treatment of dental diseases and to develop an effective method of its increase. Therefore actual search of new forms of psycho hygiene and psycho prevention with use of modern information technologies which should provide high level of dental health of the military personnel is represented. The purpose of the real research was establishment of the factors forming motivation to prevention and treatment of the main dental diseases, and development of a psycho physiological method of its increase. The carried-out research allows to expand and systematize ideas necessary for the practical doctor of the major factors forming motivation to prevention and treatment of the main dental diseases. Development of an objective technique of a complex assessment of level of motivation of patients to prevention and treatment of dental pathology will allow to prove the new perspective direction of the sanitary educational work, allowing to reduce fobiya level, effectively to increase motivation of the patient to receiving the timely dental help. It especially is important if to consider that numerous programs of hygienic training and the education, applied in our country, didn't lead to change of hygienic skills of the population in expected

[The oral cavity condition in patients with high blood pressure].

Science.gov (United States)

Rosiak, Joanna; Kubić-Filiks, Beata; Szymańska, Jolanta

2015-10-01

The incidence of high blood pressure in adults is estimated at ca. 30-40% of the general population. Both hypertension disease and hypertensive drugs affect the condition of the patients' oral cavity. A review of the current literature shows that disorders most frequently found in the masticatory organ of patients with hypertension include: xerostomia, changes in salivary glands, gum hypertrophy, lichenoid lesions, taste disorders, and paraesthesias. The authors emphasize that patients with high blood pressure, along with the treatment of the underlying disease, should receive prophylactic and therapeutic dental care. This would enable reduction and/or elimination of unpleasant complaints, and also help prevent the emergence of secondary disorders in the patients' oral cavity as a result of hypertension pharmacotherapy. © 2015 MEDPRESS.

The Patient Care During Before Radiotherapy in Oral Cavity Cancer

International Nuclear Information System (INIS)

Jeon, Byeong Chul; Park, Jae Il

1995-01-01

All patients who will Undergo irradiation of the oral cavity cancer will need dental before and during Radiotherapy. The extent of the region and the presence of numerous critical normal tissues(mucosa, gingiva, teeth and the alveolar ridge, alveolar bony structure, etc) in the oral cavity area, injury to which could result in serious functional impairment. Therefore I evaluate the Usefulness of custom-made intraoral shielding device before and during Radiotherapy in oral cavity cancer. Materials and Methods (1): Manufacture process of Custom-made intraoral shielding device Containing Cerroband. A. Acquisition of impression B. Matrix Constitution C. Separation by Separator D. Sprinkle on method E. Trimming F. Spacing G. Fill with Cerroband Materials and Methods (2):A. Preannealing B. TLD Set up C. Annealing D. TLD Reading Results = Therefore dosimetric characteristics in oral cavity by TLD Compared to isodose curve dose distribution Ipsilateral oral mucosa, Contralateral oral mucosa, alveolar ridge, tongue, dose was reduced by intraoral shielding device containing Cerroband technique Compared to isodose plan. The custom-made intra-oral shielding device containing Cerroband was useful in reducing the Contralateral oral mucosa dose and Volume irradiated.

Dental laboratory communication regarding removable dental prosthesis design in the UAE.

Science.gov (United States)

Haj-Ali, Reem; Al Quran, Firas; Adel, Omar

2012-07-01

The purpose of this study was to determine the methods dental practitioners in the United Arab Emirates (UAE) use to communicate cast removable dental prosthesis (RDP) design to dental laboratories; identify common practices taken by dentists/dental technicians prior to fabrication of RDP framework; and seek out dental technicians' attitudes toward their role in RDP design decisions. All dental laboratories (n = 28) listed in a local telephone directory were invited to complete a questionnaire through a face-to-face interview. They were also requested to examine RDP cases fabricated in the past 2 months and identify steps taken by dentists/dental technicians prior to fabrication of the framework. Descriptive statistics were used to report frequencies and percentages. Twenty-one (75%) dental laboratories agreed to participate, out of which 19 had the facilities to fabricate chrome-cobalt RDPs. Cast RDPs comprised approximately 4.04% (±2.67) of services provided. A reported 84.2% of dentists frequently communicate through generic lab script, with 89.5% rarely/never giving details regarding RDP design. While 52.6% of labs agree/strongly agree that it is the dentist's responsibility to decide the final RDP design, 94.7% agree/strongly agree that dentists should depend on dental technicians for design-making decisions. A total of 19 RDP cases were reviewed. All 19 were surveyed and designed by dental technicians but received dentist approval of design prior to fabrication. Thirteen (68.4%) had rest-seat preparations done by dentists after approval, and new impressions sent to the lab. No other tooth modifications were noted. The responsibility of RDP design appeared to be largely delegated to dental technicians. Importance of tooth modifications seemed to be undervalued and not completed prior to framework fabrication. © 2012 by the American College of Prosthodontists.

A tissue-dependent hypothesis of dental caries.

Science.gov (United States)

Simón-Soro, A; Belda-Ferre, P; Cabrera-Rubio, R; Alcaraz, L D; Mira, A

2013-01-01

Current understanding of dental caries considers this disease a demineralization of the tooth tissues due to the acid produced by sugar-fermenting microorganisms. Thus, caries is considered a diet- and pH-dependent process. We present here the first metagenomic analysis of the bacterial communities present at different stages of caries development, with the aim of determining whether the bacterial composition and biochemical profile are specific to the tissue affected. The data show that microbial composition at the initial, enamel-affecting stage of caries is significantly different from that found at subsequent stages, as well as from dental plaque of sound tooth surfaces. Although the relative proportion of Streptococcus mutans increased from 0.12% in dental plaque to 0.72% in enamel caries, Streptococcus mitis and Streptococcus sanguinis were the dominant streptococci in these lesions. The functional profile of caries-associated bacterial communities indicates that genes involved in acid stress tolerance and dietary sugar fermentation are overrepresented only at the initial stage (enamel caries), whereas other genes coding for osmotic stress tolerance as well as collagenases and other proteases enabling dentin degradation are significantly overrepresented in dentin cavities. The results support a scenario in which pH and diet are determinants of the disease during the degradation of enamel, but in dentin caries lesions not only acidogenic but also proteolytic bacteria are involved. We propose that caries disease is a process of varying etiology, in which acid-producing bacteria are the vehicle to penetrate enamel and allow dentin degrading microorganisms to expand the cavity. © 2013 S. Karger AG, Basel.

The role of general dental practitioner in oral health | Nwoku ...

African Journals Online (AJOL)

Other diseases that affect the oral cavity include, but not limited to caries, infections of the gum and jaws, malformations, benign and malignant tumours, as well as diabetes. The general dental practitioner therefore has very important duties. These include early recognition and diagnosis of oral health problems, oral health ...

Reduction of dental metallic artefacts in CT: Value of a newly developed algorithm for metal artefact reduction (O-MAR)

International Nuclear Information System (INIS)

Kidoh, M.; Nakaura, T.; Nakamura, S.; Tokuyasu, S.; Osakabe, H.; Harada, K.; Yamashita, Y.

2014-01-01

Aim: To evaluate the image quality of O-MAR (Metal Artifact Reduction for Orthopedic Implants) for dental metal artefact reduction. Materials and methods: This prospective study received institutional review board approval and written informed consent was obtained. Thirty patients who had dental implants or dental fillings were included in this study. Computed tomography (CT) images were obtained through the oral cavity and neck during the portal venous phase. The system reconstructed the O-MAR-processed images in addition to the uncorrected images. CT attenuation and image noise of the soft tissue of the oral cavity were compared between the O-MAR and the uncorrected images. Qualitative analysis was undertaken between the two image groups. Results: The image noise of the O-MAR images was significantly lower than that of the uncorrected images (p < 0.01). O-MAR offered plausible attenuations of soft tissue compared with non-O-MAR. Better qualitative scores were obtained in the streaking artefacts and the degree of depiction of the oral cavity with O-MAR compared with non-O-MAR. Conclusion: O-MAR enables the depiction of structures in areas in which this was not previously possible due to dental metallic artefacts in qualitative image analysis. O-MAR images may have a supplementary role in addition to uncorrected images in oral diagnosis

Dental anomalies in children submitted to antineoplastic therapy.

Science.gov (United States)

Carrillo, Camila Merida; Corrêa, Fernanda Nahás Pires; Lopes, Nilza Nelly Fontana; Fava, Marcelo; Odone Filho, Vicente

2014-06-01

Cancer is the third most frequent cause of death in children in Brazil. Early diagnosis and medical advances have significantly improved treatment outcomes, which has resulted in higher survival rates and the management of late side effects has become increasingly important in caring for these patients. Dental abnormalities are commonly observed as late effects of antineoplastic therapy in the oral cavity. The incidence and severity of the dental abnormalities depend on the child's age at diagnosis and the type of chemotherapeutic agent used, as well as the irradiation dose and area. The treatment duration and aggressivity should also be considered. Disturbances in dental development are characterized by changes in shape, number and root development. Enamel anomalies, such as discoloration, opacities and hypoplasia are also observed in these patients. When severe, these abnormalities can cause functional and esthetic sequelae that have an impact on the children's and adolescents' quality of life. General dentists and pediatric dentists should understand these dental abnormalities and how to identify them aiming for early diagnosis and appropriate treatment.

Femtosecond lasers as novel tool in dental surgery

Science.gov (United States)

Serbin, J.; Bauer, T.; Fallnich, C.; Kasenbacher, A.; Arnold, W. H.

2002-09-01

There is a proven potential of femtosecond lasers for medical applications like cornea shaping [1], ear surgery or dental surgery [2]. Minimal invasive treatment of carious tissue has become an increasingly important aspect in modern dentistry. State of the art methods like grinding using turbine-driven drills or ablation by Er:YAG lasers [3] generate mechanical and thermal stress, thus generating micro cracks of several tens of microns in the enamel [4]. These cracks are starting points for new carious attacks and have to be avoided for long term success of the dental treatment. By using femtosecond lasers (1 fs=10 -15 s) for ablating dental tissue, these drawbacks can be overcome. We have demonstrated that femtosecond laser ablation offers a tool for crack-free generation of cavities in dental tissue. Furthermore, spectral analysis of the laser induced plasma has been used to indicate carious oral tissue. Our latest results on femtosecond laser dentistry will be presented, demonstrating the great potential of this kind of laser technology in medicine.

Dental anomalies in children submitted to antineoplastic therapy

Directory of Open Access Journals (Sweden)

Camila Merida Carrillo

2014-06-01

Full Text Available Cancer is the third most frequent cause of death in children in Brazil. Early diagnosis and medical advances have significantly improved treatment outcomes, which has resulted in higher survival rates and the management of late side effects has become increasingly important in caring for these patients. Dental abnormalities are commonly observed as late effects of antineoplastic therapy in the oral cavity. The incidence and severity of the dental abnormalities depend on the child's age at diagnosis and the type of chemotherapeutic agent used, as well as the irradiation dose and area. The treatment duration and aggressivity should also be considered. Disturbances in dental development are characterized by changes in shape, number and root development. Enamel anomalies, such as discoloration, opacities and hypoplasia are also observed in these patients. When severe, these abnormalities can cause functional and esthetic sequelae that have an impact on the children's and adolescents' quality of life. General dentists and pediatric dentists should understand these dental abnormalities and how to identify them aiming for early diagnosis and appropriate treatment.

[Research progress on a nanodrug delivery system for prevention and control of dental caries and periodontal diseases].

Science.gov (United States)

Yaling, Jiang; Mingye, Feng; Lei, Cheng

2017-02-01

Dental caries and periodontal diseases are common chronic infectious diseases that cause serious damage to oral health. Bacteria is the primary factor leading to such conditions. As a dental plaque control method, chemotherapeutic agents face serious challenges in dental care because of the specific physiological and anatomical characteristics of the oral cavity. Nanodrug delivery system is a series of new drug delivery systems at nanoscale, and it can target cells, promote sustainedrelease effects, and enhance biodegradation. This review focuses on research progress on nanodrug delivery systems for prevention and control of dental caries and periodontal diseases.

Evaluation of the temperature rise in pulp chamber during class V preparation with Er:YAG laser

International Nuclear Information System (INIS)

Picinini, Leonardo Santos

2001-01-01

One of the major concerns regarding laser irradiation in the dentistry field is the overheating in dental tissue, specially pulpal tissue. A temperature raise over 5.5 deg C is considered to be harmful to its vitality. The current study evaluated the temperature increase in the pulp chamber, during class V preparation, performed with the laser Er:YAG in 36 bovine incisive extracted teeth. The samples were eroded on the outer side of the vestibular wall to obtain the dentinal thickness of 2.0 mm (group I), 1.0 mm (group II) and 0.5 mm (group III). Thermocouples were fixed to the inner part of the vestibular wall using thermal paste, through the palatine opening of the samples. Class V cavities were prepared in the vestibular side only in 1 mm 2 thick dentins. Irradiation parameters used were: 500 mJ/10 Hz, 850 mJ/10 Hz and 1 000 mJ/10 Hz for all the groups. The results were processed by a microcomputer. This study showed that the temperature increased into the pulpal cavity reached around 3 deg C for the groups I (2,0 mm thick dentine) and II (1.0 mm thick dentine). In the group III (0.5 mm thick) temperature was around 5.5 deg C. Thus, the parameters used for cavity preparation, using Er:YAG laser, were safe in relation to the temperature raise for dentinal thickness of 1,0 and 2,0 mm; in 0.5 mm thick dentins, temperature increase reached 5.5 deg C and an appropriate correction in the laser parameters was necessary. (author)

Dental caries-associated risk factors and type 1 diabetes mellitus.

Science.gov (United States)

Sampaio, Norma; Mello, Sandra; Alves, Cresio

2011-01-01

Type 1 diabetes mellitus (T1DM) is associated with various oral complications. However there is no consensus regarding the association of T1DM and caries. Critical revision of dental caries-associated risk factors and type 1 diabetes mellitus. Search of the MEDLINE and LILACS databases from 2000 to 2010, using, in different combination, the key words "dental caries", "diabetes mellitus" and "type 1 diabetes mellitus". The association between T1DM and dental caries remains controversial. Although some studies demonstrate a higher prevalence of caries due to the increased concentration of salivary glucose, acidity of the oral cavity, salivary viscosity, reduced salivary flow rate, and salivary gland dysfunction; other studies report a reduction of caries levels, probably caused by decreased ucrose ingestion. Although patients with uncontrolled T1DM and poor oral hygiene may present increased prevalence of dental caries, the literature does not describe a consistent relationship between T1DM and dental caries. Further investigations are warranted. If a true association is substantiated, intervention studies to prevent or reduce the occurrence of caries in this population should follow.

Preparation and handling of surfaces for superconducting radio frequency cavities

International Nuclear Information System (INIS)

Bloess, D.

1988-01-01

Fortunately, surface treatment for s.c. cavities knows only one simple rule. If one observes this rule strictly one will be successful, if not, one will fail! The rule is CLEANLINESS. This means: clean material (high purity niobium without inclusions), clean (analytical grade) polishing chemicals and solvents, ultraclean (semiconductor grade) rinsing water, ultraclean (class 100) assembly environment. In general, if one applies the same working practice as the semiconductor industry, one will produce surfaces that are less clean than silicon wafers, due to the shape of the cavity (an inner surface is much more difficult to clean than a flat wafer); due to its size and due to the material (niobium is hydrophilic which makes the water with all the dirt in it stick to the surface). 9 references

Microbiology of dental plaque biofilms and their role in oral health and caries.

Science.gov (United States)

Marsh, Philip D

2010-07-01

Dental plaque is the biofilm found naturally on teeth. Dental plaque is also implicated in dental caries, which is associated with shifts in the microbial balance of the biofilm resulting in increased proportions of acid producing and acid tolerating bacteria, especially (but not exclusively) mutans streptococci and lactobacilli. The regular intake of fermentable dietary sugars, or impaired saliva flow, produces persistent conditions of low pH within the biofilm, which selects for these cariogenic bacteria. Clinicians should prevent this disruption to the natural microbial balance of the biofilm (relevant approaches are described) rather than merely treating its consequences by restoring cavities. Copyright 2010 Elsevier Inc. All rights reserved.

Heat generated by dental implant drills during osteotomy-a review: heat generated by dental implant drills.

Science.gov (United States)

Mishra, Sunil Kumar; Chowdhary, Ramesh

2014-06-01

Osseointegration is the more stable situation and results in a high success rate of dental implants. Heat generation during rotary cutting is one of the important factors influencing the development of osseointegration. To assess the various factors related to implant drills responsible for heat generation during osteotomy. To identify suitable literature, an electronic search was performed using Medline and Pubmed database. Articles published in between 1960 to February 2013 were searched. The search is focused on heat generated by dental implant drills during osteotomy. Various factors related to implant drill such effect of number of blades; drill design, drill fatigue, drill speed and force applied during osteotomies which were responsible for heat generation were reviewed. Titles and abstracts were screened, and literature that fulfilled the inclusion criteria was selected for a full-text reading. The initial literature search resulted in 299 articles out of which only 70 articles fulfils the inclusion criteria and were included in this systematic review. Many factors related to implant drill responsible for heat generation were found. Successful preparation of an implant cavity with minimal damage to the surrounding bone depends on the avoidance of excessive temperature generation during surgical drilling. The relationship between heat generated and implant drilling osteotomy is multifactorial in nature and its complexity has not been fully studied. Lack of scientific knowledge regarding this issue still exists. Further studies should be conducted to determine the various factors which generate less heat while osteotomy such as ideal ratio of force and speed in vivo, exact time to replace a drill, ideal drill design, irrigation system, drill-bone contact area.

Thermographic analysis of the effect of composite type, layering method, and curing light on the temperature rise of photo-cured composites in tooth cavities.

Science.gov (United States)

Kim, Min-Jung; Kim, Ryan Jin-Young; Ferracane, Jack; Lee, In-Bog

2017-10-01

The purpose of this study was to investigate temperature rise in the composite and dentin of a class I cavity in extracted human molars under different restoration conditions, including the use of different composite types, layering methods, and curing lights. Open occlusal cavities were prepared on 28 extracted human molars. A conventional (Filtek Z250) and a bulk-fill (Filtek Bulk Fill Posterior; BFP) composite were used to restore the preparations. BFP was incrementally layered or bulk-filled. Bulk-filled BFP was cured with two different lights, the Elipar S10 and the BeLite. Each layer was illuminated for 20s, while thermograms of the specimens were recorded for 100s using an infrared thermal camera. Temperature changes on the composite and dentin surfaces were obtained at points of interest (POI) pertaining to successive incremental distances of 0.75mm from the top of the cavity to the pulp. The polymerization kinetics of each composite was determined using photo-differential scanning calorimetry. The greatest temperature rise was observed 0.75mm apical from the top of the cavity. All groups showed over 6°C maximum temperature rise (ΔT max ) at the pulpal side of the dentin. Upon curing, Z250 reached ΔT=5°C faster than BFP; however, ΔT max of the two composites were comparable at any POI. Bulk filling showed greater ΔT max than incremental filling at 0.75mm apical from the top and in the middle of the cavity. The Elipar S10 light generated faster temperature changes in the curing composite at all recorded positions throughout the depth of the cavity and greater ΔT max in all POIs compared to BeLite. Real-time thermographic analysis demonstrated that the composite type and layering method did not influence the temperature rise at the pulpal side of dentin during composite restoration of an occlusal preparation in a tooth. The amount and initial rate of temperature increase was most affected by the radiant exposure of the light curing unit. Within the

Aesthetic Dental Procedures: Legal and Medico-legal Implications.

Science.gov (United States)

Di Lorenzo, Pierpaolo; Casella, Claudia; Capasso, Emanuele; Delbon, Paola; Fedeli, Piergiorgio; Policino, Fabio; Niola, Massimo

2018-01-01

Dental treatments, as well as simple anatomical and functional repair work, can also be for aesthetic purposes. This is because the anatomical area concerned, i.e. the oral cavity, has a great power of attraction. Aesthetic treatments in general - in particular dental treatments - have been on the rise in recent years, and this has also meant an increase in claims due to patient dissatisfaction with the results obtained. Numerous laws have been introduced that emphasise the need for comprehensive prior information in order to acquire valid consent. This has resulted in the elimination of the distinction between the obligation of means and obligation of result, with achievement of the normally expected result required in any case.

Managing dental caries in children in Turkey--a discussion paper.

Science.gov (United States)

Topaloglu-Ak, Asli; Eden, Ece; Frencken, Jo E

2009-11-25

This paper describes the oral healthcare system and disease situation amongst children in Turkey. Considering the high prevalence and severity of dental caries, a proposal for improvement of oral health in this population group is formulated. A virtual absence of palliative, preventive and restorative care characterises juvenile oral healthcare in Turkey. Consequently, carious cavities remain untreated, which may lead to pain, discomfort and functional limitation and, further, may impact negatively upon general health and cognitive development. As a first step to controlling dental caries, a national health programme including promotional, preventive and minimal intervention approaches for managing dental caries is proposed. The pros and cons of community-oriented caries-preventive measures are discussed. Daily tooth brushing with fluoridated toothpaste at home, in mother- and child-care centres, kindergartens, and schools is highlighted. The dental profession, government, university officials and other stakeholders need to meet and determine how best the oral health of children in Turkey can be improved. The present proposed plan is considered a starting point.

Triphala in prevention of dental caries and as an antimicrobial in oral cavity- a review.

Science.gov (United States)

Shanbhag, Vagish K L

2015-01-01

Dental caries is a widely prevalent infectious disease afflicting the humans worldwide. Each year oral infections such as dental caries, periodontal diseases and oral candidiasis significantly adds to the economic burden of the world. Though there are standard management techniques for these diseases; they do have side effects and are not cost effective. Ayurveda is a traditional Indian system of medicine that is being practiced in the Indian peninsula since ages. Among the various herbal medicines in ayurveda, triphala occupies a royal position due to its wide beneficial systemic actions. Triphala is a mixture of fruits of Terminalia bellirica, Terminalia chebula and Emblica officinalis. The antimicrobial actions of triphala are well documented in the literature. However availability of review articles regarding triphala as an antimicrobial against oral infections is limited. Need was felt to review this aspect of triphala. The present article reviews the use of triphala and its constituents in the prevention and control of dental caries and other common oral infections. Thorough review of the literature indicated that triphala can be effectively used to manage dental caries, gingival and periodontal diseases. Further it can also be utilized as a root canal irrigant and against oral candida species.

Dental students′ compliance with antibiotic prescribing guidelines for dental infections in children

Directory of Open Access Journals (Sweden)

Yee Chen Wong

2016-01-01

Full Text Available Context: To investigate the antibiotic prescribing training received by dental students, clinical experience in treating child patients, awareness of antibiotic prescribing guidelines, preparedness in antibiotic prescribing, and compliance with antibiotic prescribing guidelines for the management of dental infections in children. Methods: This was a cross-sectional study involving final year dentals students from Malaysian and Asian dental schools. A self-administered questionnaire consisting of five clinical case scenarios was e-mailed to all final year students at selected dental schools. Students′ responses were compared for each clinical case scenario with the prescribing guidelines of the American Academy of Pediatric Dentistry and the American Dental Association. Compliance in each scenario was tested for association with their preparedness in antibiotic prescribing, previous training on antibiotic prescribing and awareness of antibiotic prescribing guidelines using Chi-square test. Data collected were analyzed using SPSS statistics version 20. Results: A total of 108 completed responses were received. About 74 (69% students were from Malaysian dental schools. The compliance rate with prescribing guidelines ranged from 15.7% to 43.5%. Those attending Malaysian dental schools (47.3% and those who had treated child patient more often (46.3% were more likely (P < 0.05 to be aware of the guidelines. Those who had received antibiotic prescribing training (21.3% were more likely to think they were well prepared in antibiotic prescribing (P < 0.05. Conclusions: Final year dental students had low awareness and compliance with antibiotic prescribing guidelines. Further research is needed to investigate how compliance with the guidelines may be enhanced.

Current status of disinfection of dental impressions in Indian dental colleges: a cause of concern.

Science.gov (United States)

Marya, Charu Mohan; Shukla, Prasoon; Dahiya, Vandana; Jnaneswar, Avinash

2011-11-15

Dentistry is predominantly a field of surgery, involving exposure to blood and other potentially infectious materials and therefore requires a high standard of infection control and safety practice in controlling cross-contamination and occupational exposures to blood- and saliva-borne diseases. A questionnaire survey was conducted in 60 dental colleges throughout India to establish routine methods of treating impressions of the oral cavity for disinfection. An email describing the purpose of the study along with a short questionnaire was sent to one of the teaching faculty of concerned departments of the colleges. Questions were asked regarding availability of materials required to disinfect the impressions, the preferred method to treat the impression, and whether postgraduate courses were offered by the department. The routine method of treating the impression reported by 75.9% of the respondents was washing under running water, while 24.1% of the respondents reported that impressions were treated by chemical disinfectants. Strict infection control measures are necessary to ensure the health and safety of dental workers and patients. The present study showed that there is a lack of commitment to high standards of infection control practices in dental colleges in India.

Evaluation of the dental structure loss produced during maintenance and replacement of occlusal amalgam restorations

Directory of Open Access Journals (Sweden)

Fernanda Sardenberg

2008-09-01

Full Text Available The aim of this in vitro study was to evaluate four different approaches to the decision of changing or not defective amalgam restorations in first primary molar teeth concerning the loss of dental structure. Ditched amalgam restorations (n = 11 were submitted to four different treatments, as follows: Control group - polishing and finishing of the restorations were carried out; Amalgam group - the ditched amalgam restorations were replaced by new amalgam restorations; Composite resin group - the initial amalgam restorations were replaced by composite resin restorations; Flowable resin group - the ditching around the amalgam restorations was filled with flowable resin. Images of the sectioned teeth were made and the area of the cavities before and after the procedures was determined by image analysis software to assess structural loss. The data were submitted to ANOVA complemented by the Student Newman Keuls test (p < 0.05. The cavities in all the groups presented significantly greater areas after the procedures. However, the amalgam group showed more substantial dental loss. The other three groups presented no statistically significant difference in dental structure loss after the re-treatments. Thus, replacing ditched amalgam restorations by other similar restorations resulted in a significant dental structure loss while maintaining them or replacing them by resin restorations did not result in significant loss.

Review of cavity optomechanical cooling

International Nuclear Information System (INIS)

Liu Yong-Chun; Hu Yu-Wen; Xiao Yun-Feng; Wong Chee Wei

2013-01-01

Quantum manipulation of macroscopic mechanical systems is of great interest in both fundamental physics and applications ranging from high-precision metrology to quantum information processing. For these purposes, a crucial step is to cool the mechanical system to its quantum ground state. In this review, we focus on the cavity optomechanical cooling, which exploits the cavity enhanced interaction between optical field and mechanical motion to reduce the thermal noise. Recent remarkable theoretical and experimental efforts in this field have taken a major step forward in preparing the motional quantum ground state of mesoscopic mechanical systems. This review first describes the quantum theory of cavity optomechanical cooling, including quantum noise approach and covariance approach; then, the up-to-date experimental progresses are introduced. Finally, new cooling approaches are discussed along the directions of cooling in the strong coupling regime and cooling beyond the resolved sideband limit. (topical review - quantum information)

Amino acid derivative-mediated detoxification and functionalization of dual cure dental restorative material for dental pulp cell mineralization.

Science.gov (United States)

Minamikawa, Hajime; Yamada, Masahiro; Iwasa, Fuminori; Ueno, Takeshi; Deyama, Yoshiaki; Suzuki, Kuniaki; Yawaka, Yasutaka; Ogawa, Takahiro

2010-10-01

Current dental restorative materials are only used to fill the defect of hard tissues, such as dentin and enamel, because of their cytotoxicity. Therefore, exposed dental pulp tissues in deep cavities must be first covered by a pulp capping material like calcium hydroxide to form a layer of mineralized tissue. However, this tissue mineralization is based on pathological reaction and triggers long-lasting inflammation, often causing clinical problems. This study tested the ability of N-acetyl cysteine (NAC), amino acid derivative, to reduce cytotoxicity and induce mineralized tissue conductivity in resin-modified glass ionomer (RMGI), a widely used dental restorative material having dual cure mechanism. Rat dental pulp cells were cultured on untreated or NAC-supplemented RMGI. NAC supplementation substantially increased the percentage of viable cells from 46.7 to 73.3% after 24-h incubation. Cell attachment, spreading, proliferative activity, and odontoblast-related gene and protein expressions increased significantly on NAC-supplemented RMGI. The mineralization capability of cells, which was nearly suppressed on untreated RMGI, was induced on NAC-supplemented RMGI. These improved behaviors and functions of dental pulp cells on NAC-supplemented RMGI were associated with a considerable reduction in the production of intracellular reactive oxygen species and with the increased level of intracellular glutathione reserves. These results demonstrated that NAC could detoxify and functionalize RMGIs via two different mechanisms involving in situ material detoxification and antioxidant cell protection. We believe that this study provides a new approach for developing dental restorative materials that enables mineralized tissue regeneration.

Confronting shibboleths of dental education.

Science.gov (United States)

Masella, Richard S

2005-10-01

Shibboleths are common expressions presented as indisputable truths. When used in educational discussions, they reflect "motherhood and apple pie" viewpoints and tend to bring debate to a halt. Use of shibboleths may precede a desired imposition of "locksteps" in educational programming and are easily perceived as paternalistic by recipients. Nine shibboleths are presented as common beliefs of dental faculty and administrators. Evidence contradicting the veracity of the "obvious truths" is offered. The traditional "splendid isolation" of dentistry contributes to parochialism and belief in false shibboleths. Sound principles of higher and health professions education, student learning, and dental practice apply to dental education as to all health disciplines. Student passivity in dental education is not the best preparation for proficiency in dental practice. The master teacher possesses a repertoire of methodologies specific to meeting defined educational objectives. Active learning experiences bear close resemblances to professional duties and responsibilities and internally motivate future doctors of dental medicine. The difficulty in achieving curricular change leads to curricular entrenchment. Dentistry and dental education should not trade their ethical high ground for the relatively low ethical standards of the business world. Principles of professional ethics should govern relationships between dentists, whether within the dental school workplace or in practice. Suggestions are made on how to confront shibboleths in dental school settings.

Advancing education in dental hygiene.

Science.gov (United States)

Battrell, Ann; Lynch, Ann; Steinbach, Pam; Bessner, Sue; Snyder, Josh; Majeski, Jean

2014-06-01

The changing health care environment and societal imperatives indicate the need for transformative change within the dental hygiene profession to serve the emerging needs of the public. The American Dental Hygienists' Association is leading the way toward meaningful change. The American Dental Hygienists' Association (ADHA) has as its vision the integration of dental hygienists into the health care delivery system as essential primary care providers to expand access to oral health care. This article provides data on current dental hygiene education programs and those in development. Also included is a discussion regarding how the dental hygiene profession can better serve the health and wellness needs of society by transforming the way graduates are prepared for the future. ADHA's dental hygiene survey center data, policies and a futuristic analysis plus a review of the professional literature describe the current state of dental hygiene education and the profession. A discussion of societal, health care and educational trends that creates the imperative for transformation of the dental hygiene profession is provided. Ultimately, the purpose of advancing education in dental hygiene is to achieve better oral and overall health for more people. The profession's responsibility to the public includes evaluating its own ability to provide care and taking the steps necessary to ensure its maximum effectiveness. ADHA is leading this process for dental hygienists in diverse ways. It is imperative that the dental hygiene profession understands and embraces the changing health care environment. Through open dialog and the sharing of evidence the professional path will be determined along with forward movement for the benefit of society and the dental hygiene profession. Copyright © 2014 Elsevier Inc. All rights reserved.

Utilizing optical coherence tomography for CAD/CAM of indirect dental restorations

Science.gov (United States)

Chityala, Ravishankar; Vidal, Carola; Jones, Robert

Optical Coherence Tomography (OCT) has seen broad application in dentistry including early carious lesion detection and imaging defects in resin composite restorations. This study investigates expanding the clinical usefulness by investigating methods to use OCT for obtaining three-dimensional (3D) digital impressions, which can be integrated to CAD/CAM manufacturing of indirect restorations. 3D surface topography `before' and `after' a cavity preparation was acquired by an intraoral cross polarization swept source OCT (CP-OCT) system with a Micro-Electro-Mechanical System (MEMS) scanning mirror. Image registration and segmentation methods were used to digitally construct a replacement restoration that modeled the original surface morphology of a hydroxyapatite sample. After high resolution additive manufacturing (e.g. polymer 3D printing) of the replacement restoration, micro-CT imaging was performed to examine the marginal adaptation. This study establishes the protocol for further investigation of integrating OCT with CAD/CAM of indirect dental restorations.

Synthesis and characterization of dental composites

Science.gov (United States)

Djustiana, Nina; Greviana, Nadia; Faza, Yanwar; Sunarso

2018-02-01

During the last few decades, the increasing demands in esthetic dentistry have led to the development of dental composites material that provide similar appearance to the natural teeth. Recently, esthetic trend was an issue which increase the demand for teeth restorations that is similar with the origin. The esthetics of dental composite are more superior compared to amalgam, since its color look similar with natural teeth. Various dental composites have been developed using many type of fillers such as amorphous silica, quartz), borosilicate, Li-Sr-Ba-Al glass and oxide: zirconia and alumina. Researchers in Faculty of Dentistry University of Padjadjaran have prepared dental composites using zirconia-alumina-silica (ZAS) system as the filler. The aim is to improve the mechanical properties and the esthetic of the dental composites. The ZAS was obtained from chemical grade purity chemicals and Indonesia's natural sand as precursors its characterization were also presented. This novel method covers the procedure to synthesis and characterize dental composites in Padjadjaran University and some review about dental composites in global research.

Efficient digitalization method for dental restorations using micro-CT data.

Science.gov (United States)

Kim, Changhwan; Baek, Seung Hoon; Lee, Taewon; Go, Jonggun; Kim, Sun Young; Cho, Seungryong

2017-03-15

The objective of this study was to demonstrate the feasibility of using micro-CT scan of dental impressions for fabricating dental restorations and to compare the dimensional accuracy of dental models generated from various methods. The key idea of the proposed protocol is that dental impression of patients can be accurately digitized by micro-CT scan and that one can make digital cast model from micro-CT data directly. As air regions of the micro-CT scan data of dental impression are equivalent to the real teeth and surrounding structures, one can segment the air regions and fabricate digital cast model in the STL format out of them. The proposed method was validated by a phantom study using a typodont with prepared teeth. Actual measurement and deviation map analysis were performed after acquiring digital cast models for each restoration methods. Comparisons of the milled restorations were also performed by placing them on the prepared teeth of typodont. The results demonstrated that an efficient fabrication of precise dental restoration is achievable by use of the proposed method.

Efficient digitalization method for dental restorations using micro-CT data

Science.gov (United States)

Kim, Changhwan; Baek, Seung Hoon; Lee, Taewon; Go, Jonggun; Kim, Sun Young; Cho, Seungryong

2017-03-01

The objective of this study was to demonstrate the feasibility of using micro-CT scan of dental impressions for fabricating dental restorations and to compare the dimensional accuracy of dental models generated from various methods. The key idea of the proposed protocol is that dental impression of patients can be accurately digitized by micro-CT scan and that one can make digital cast model from micro-CT data directly. As air regions of the micro-CT scan data of dental impression are equivalent to the real teeth and surrounding structures, one can segment the air regions and fabricate digital cast model in the STL format out of them. The proposed method was validated by a phantom study using a typodont with prepared teeth. Actual measurement and deviation map analysis were performed after acquiring digital cast models for each restoration methods. Comparisons of the milled restorations were also performed by placing them on the prepared teeth of typodont. The results demonstrated that an efficient fabrication of precise dental restoration is achievable by use of the proposed method.

Endodontic Shaping Performance Using Nickel–Titanium Hand and Motor ProTaper Systems by Novice Dental Students

OpenAIRE

Tu, Ming-Gene; Chen, San-Yue; Huang, Heng-Li; Tsai, Chi-Cheng

2008-01-01

Preparing a continuous tapering conical shape and maintaining the original shape of a canal are obligatory in root canal preparation. The purpose of this study was to compare the shaping performance in simulated curved canal resin blocks of the same novice dental students using hand-prepared and engine-driven nickel–titanium (NiTi) rotary ProTaper instruments in an endodontic laboratory class. Methods: Twenty-three fourth-year dental students attending China Medical University Dental Schoo...

Analysis of physiological responses associated with emotional changes induced by viewing video images of dental treatments.

Science.gov (United States)

Sekiya, Taki; Miwa, Zenzo; Tsuchihashi, Natsumi; Uehara, Naoko; Sugimoto, Kumiko

2015-03-30

Since the understanding of emotional changes induced by dental treatments is important for dentists to provide a safe and comfortable dental treatment, we analyzed physiological responses during watching video images of dental treatments to search for the appropriate objective indices reflecting emotional changes. Fifteen healthy young adult subjects voluntarily participated in the present study. Electrocardiogram (ECG), electroencephalogram (EEG) and corrugator muscle electromyogram (EMG) were recorded and changes of them by viewing videos of dental treatments were analyzed. The subjective discomfort level was acquired by Visual Analog Scale method. Analyses of autonomic nervous activities from ECG and four emotional factors (anger/stress, joy/satisfaction, sadness/depression and relaxation) from EEG demonstrated that increases in sympathetic nervous activity reflecting stress increase and decreases in relaxation level were induced by the videos of infiltration anesthesia and cavity excavation, but not intraoral examination. The corrugator muscle activity was increased by all three images regardless of video contents. The subjective discomfort during watching infiltration anesthesia and cavity excavation was higher than intraoral examination, showing that sympathetic activities and relaxation factor of emotion changed in a manner consistent with subjective emotional changes. These results suggest that measurement of autonomic nervous activities estimated from ECG and emotional factors analyzed from EEG is useful for objective evaluation of subjective emotion.

Adults with Disabilities and Proper Dental Care

Science.gov (United States)

Waldman, H. Barry; Perlman, Steven P.; Cinotti, Debra A.

2009-01-01

Repeated studies of graduating dental students indicate limited preparation to provide services for individuals with special healthcare needs. By the end of the 1990s and into the present decade, more than half of the U.S. dental schools provided less than five hours of class room presentations and about three quarters of the schools provided 0-5…

Backscattering from dental restorations and splint materials during therapeutic radiation

International Nuclear Information System (INIS)

Farman, A.G.; Sharma, S.; George, D.I.; Wilson, D.; Dodd, D.; Figa, R.; Haskell, B.

1985-01-01

Models were constructed to simulate as closely as possible the human oral cavity. Radiation absorbed doses were determined for controls and various test situations involving the presence of dental restorative and splint materials during cobalt-60 irradiation of the models. Adjacent gold full crowns and adjacent solid dental silver amalgam cores both increased the dose to the interproximal gingivae by 20%. Use of orthodontic full bands for splinting the jaws increased the dose to the buccal tissues by an average of 10%. Augmentation of dose through backscatter radiation was determined to be only slight for intracoronal amalgam fillings and stainless steel or plastic bracket splints

Fibromyalgia syndrome: considerations for dental hygienists.

Science.gov (United States)

Walters, Amber; Tolle, Susan L; McCombs, Gayle M

2015-04-01

Fibromyalgia syndrome (FMS) is a neurosensory disorder characterized by widespread musculoskeletal pain. Typically persistent fatigue, depression, limb stiffness, non-refreshing sleep and cognitive deficiencies are also experienced. Oral symptoms and pain are common, requiring adaptations in patient management strategies and treatment interventions. Appropriate dental hygiene care of patients suffering with this disorder is contingent upon an understanding of disease epidemiology, pathophysiology, clinical characteristics, oral signs and symptoms, as well as treatment approaches. With this information dental hygienists will be better prepared to provide appropriate and effective treatment to patients with FMS. Copyright © 2015 The American Dental Hygienists’ Association.

Influence of S. mutans on base-metal dental casting alloy toxicity.

Science.gov (United States)

McGinley, E L; Dowling, A H; Moran, G P; Fleming, G J P

2013-01-01

We have highlighted that exposure of base-metal dental casting alloys to the acidogenic bacterium Streptococcus mutans significantly increases cellular toxicity following exposure to immortalized human TR146 oral keratinocytes. With Inductively Coupled Plasma-Mass Spectrometry (ICP-MS), S. mutans-treated nickel-based (Ni-based) and cobalt-chromium-based (Co-Cr-based) dental casting alloys were shown to leach elevated levels of metal ions compared with untreated dental casting alloys. We targeted several biological parameters: cell morphology, viable cell counts, cell metabolic activity, cell toxicity, and inflammatory cytokine expression. S. mutans-treated dental casting alloys disrupted cell morphology, elicited significantly decreased viable cell counts (p casting alloys induced elevated levels of cellular toxicity compared with S. mutans-treated Co-Cr-based dental casting alloys. While our findings indicated that the exacerbated release of metal ions from S. mutans-treated base-metal dental casting alloys was the likely result of the pH reduction during S. mutans growth, the exact nature of mechanisms leading to accelerated dissolution of alloy-discs is not yet fully understood. Given the predominance of S. mutans oral carriage and the exacerbated cytotoxicity observed in TR146 cells following exposure to S. mutans-treated base-metal dental casting alloys, the implications for the long-term stability of base-metal dental restorations in the oral cavity are a cause for concern.

Prevalence of Dental Caries and Designing the Interventional Strategies for School Children in Rural Konkan Region

OpenAIRE

Asawari Modak; Maruti Desai

2017-01-01

School remains an important setting offering an effective and efficient ways to reach over to children and through them, families and community members.(1) Dental caries is very common disease in childhood, interfering with food intake affecting physical development in the form of malnutrition, child’s school attendance and academic performance. Tooth decay or cavities caused by dental caries is an infectious disease and is diet and oral hygiene dependent. If left untreated result...

Dental treatment for handicapped patients; sedation vs general anesthesia and update of dental treatment in patients with different diseases

Science.gov (United States)

Corcuera-Flores, José R.; Delgado-Muñoz, José M.; Ruiz-Villandiego, José C.; Maura-Solivellas, Isabel

2014-01-01

Dental treatment on Handicapped Patients is often difficult because many people with a wide range of ages (from children to the elderly) with different pathologies that can affect the oral cavity and differ widely are included in this group. This situation creates some controversy, because according to pathology, each patient will be treated differently depending on collaboration, general health status, age or medication used to treat this pathologies. According to this situation we can opt for an outpatient treatment without any kind of previous medication, a treatment under conscious or deep sedation or a under general anesthesia treatment. With this systematic review is intended to help clarify in which cases patients should be treated under general anesthesia, sedation (conscious or deep) or outpatient clinic without any medication, as well as clarify what kind of treatments can be carried in private dental clinics and which should be carried out in a hospital. It will also discuss the most common diseases among this group of patients and the special care to be taken for their dental treatment. Key words:Hospital dentistry, handicapped patient. PMID:24121922

Cavity QED experiments, entanglement and quantum measurement

International Nuclear Information System (INIS)

Brune, M.

2001-01-01

This course is devoted to the physics of entanglement in microwave CQED (cavity quantum electrodynamics) experiments. The heart of this system is a microwave photon trap, made of superconducting mirrors, which stores a few-photon field in a small volume of space for times as long as milliseconds. This field interacts with circular Rydberg atoms injected one by one into the cavity. Section 2 is devoted to the description of the strong coupling regime in Rydberg atom CQED. The tools of the experiment are briefly presented at the beginning of this section as well as the main characteristics of the strong coupling regime. We then show in section 3 how to use the strong interaction with a single photon to perform a non-destructive detection of a single photon with a single atom as a meter. In section 4, we show that the achieved QND (quantum non-demolition) measurement process corresponds to the operation of a quantum phase gate. It allows, in principle, to prepare arbitrary atom + field entangled states. Various methods will be presented for preparing entangled states such as a two atom EPR (Einstein Podolsky Rosen) pair as well as a GHZ triplet. Entanglement involving more and more complex systems will then be investigated in section 5 where the preparation of a ''Schroedinger cat state'' of the cavity field is presented. We especially address in this last section the problem of entanglement between the system and the meter which occurs during any quantum measurement process

Assessment and evaluation of individual prerequisites for dental education.

Science.gov (United States)

Heintze, U; Radeborg, K; Bengtsson, H; Stenlåås, A

2004-11-01

Since 2001 the School of Dentistry of Malmo University in Sweden has used an alternative admissions procedure based on results of an investigation supported by the Swedish Council for the Renewal of Undergraduate Education. The investigation concerned possibilities of predicting dental school performance on the basis of an interview, as well as tests of general intelligence, spatial ability, manual dexterity, empathy and social competence. Two groups of incoming students were followed from start to completion of their training. Significant relationships were found between (i) number of course examinations failed and poor results on interviews, as well as low scores on intelligence, spatial ability, and a test of spatial-manual ability, (ii) good results in a pre-clinical course in cavity preparation and high scores on spatial ability, (iii) assessments of high social competence during training and good results on interviews, as well as high scores on empathy and non-verbal intelligence. Dropout from the study programme could not be predicted, possibly due to the varying reasons for it. Copyright 2004 Blackwell Munksgaard

Clinical and mycological analysis of dog's oral cavity

Directory of Open Access Journals (Sweden)

Rosema Santin

2013-01-01

Full Text Available The oral microbiota of humans and animals is made up of a wide variety of yeasts and bacteria, but microbiota of dogs is not totally described. Although such identification is an important step to establish the etiopathogenesis and adequate therapy for the periodontal disease The aim of this study was to evaluate and correlate oral alterations with the presence of yeasts in oral cavity of female dogs. After clinical evaluation samples from healthy and from dogs with oral diseases were obtained from three different oral sites by swabs, curettes, millimeter periodontal probes and HA membrane tip in cellulose ester. Yeast identification was performed through macroscopic and microscopic colony features and biochemical tests. Dental calculus was the most prevalent occurrence in the oral cavity of 59 females. However, the isolation of yeasts was significantly higher (p < 0.05 in animals suffering from halitosis. Eleven yeast species were identified, namely: Malassezia pachydermatis, Rhodotorula spp., Candida albicans, C. catenulata, C. famata, C. guilliermondii, C. parapsilosis, C. intermedia, Trichosporon asahii, T. mucoides and Cryptococcus albidus. It could be concluded that the yeasts are part of the microbiota from the different sites of the oral cavity of the female canines studied without causing any significant alterations except halitosis.

Filling a Conical Cavity

Science.gov (United States)

Nye, Kyle; Eslam-Panah, Azar

2016-11-01

Root canal treatment involves the removal of infected tissue inside the tooth's canal system and filling the space with a dense sealing agent to prevent further infection. A good root canal treatment happens when the canals are filled homogeneously and tightly down to the root apex. Such a tooth is able to provide valuable service for an entire lifetime. However, there are some examples of poorly performed root canals where the anterior and posterior routes are not filled completely. Small packets of air can be trapped in narrow access cavities when restoring with resin composites. Such teeth can cause trouble even after many years and lead the conditions like acute bone infection or abscesses. In this study, the filling of dead-end conical cavities with various liquids is reported. The first case studies included conical cavity models with different angles and lengths to visualize the filling process. In this investigation, the rate and completeness at which a variety of liquids fill the cavity were observed to find ideal conditions for the process. Then, a 3D printed model of the scaled representation of a molar with prepared post spaces was used to simulate the root canal treatment. The results of this study can be used to gain a better understanding of the restoration for endodontically treated teeth.

Identifying and preparing the next generation of part-time clinical teachers from dental practice.

Science.gov (United States)

Radford, D R; Hellyer, P; Meakin, N; Jones, K A

2015-10-09

Part-time general dental practitioners (GDPs) and dental care professionals (DCPs) working in practice are being increasingly utilised to deliver undergraduate clinical dental education to both dental and hygiene/therapy students. As such, there is a need for appropriate recruitment processes and ongoing staff development in the different and complex role of the clinical teacher. Recently a group of experienced dental practitioners, making a journey from GDP to part-time clinical teacher, identified common themes, experiences, challenges and realisations. These were: 'what is clinical dental education?'; 'me as a clinical teacher'; and 'specific teaching issues'. The themes highlighted the complexity of dental education and the different environment of the teaching clinic from general practice. Some of the themes identified could be a starting point for the induction process to facilitate an easier transition from experienced GDP to clinical teacher. With the current demands from both students and patients alike, the 'three way dynamic of patient, student and teacher' needs to be supported if dental schools are to attract and develop the highest quality clinical teachers. It is of critical importance to give an exceptional experience to students in their clinical education as well as to patients in terms of excellent and appropriate treatment. The challenge for deans and directors of education is to find the resources to properly fund teacher recruitment, induction and the development of part-time GDPs in order to produce the expert teachers of tomorrow.

Shear bond strength and SEM morphology evaluation of different dental adhesives to enamel prepared with ER:YAG laser

Directory of Open Access Journals (Sweden)

Patrícia T Pires

2013-01-01

Full Text Available Context: Early observations of enamel surfaces prepared by erbium lasers motivated clinicians to use laser as an alternative to chemical etching. Aims: Evaluate shear bond strength (SBS values of different dental adhesives on Erbium:Yttrium Aluminum Garnet (Er:YAG laser prepared enamel and to evaluate possible etching patterns correlations between dental adhesives and SBS values. Subjects and Methods: One hundred bovine incisors were randomly assigned to SBS tests on enamel (n = 15 and to enamel morphology analysis ( n = 5 after Er:YAG laser preparation as follows: Group I - 37% phosphoric acid (PA+ ExciTE® ; Group II - ExciTE® ; Group III - AdheSE® self-etching; Group IV - FuturaBond® no-rinse. NR; Group V - Xeno® V. Teeth were treated with the adhesive systems and subjected to thermal cycling. SBS were performed in a universal testing machine at 5 mm/min. Statistical Analysis Used: One-way ANOVA and post-hoc tests (p < 0.05. For the morphology evaluation, specimens were immersed in Ethylenediamine tetraacetic acid (EDTA and the etching pattern analyzed under Scanning Electron Microscope (SEM. Results: Mean bond strengths were Group I - 47.17 ± 1.61 MPa (type I etching pattern; Group II - 32.56 ± 1.64 MPa, Group III - 29.10 ± 1.34 MPa, Group IV - 23.32 ± 1.53 MPa (type III etching pattern; Group V - 24.43 MPa ± 1.55 (type II etching pattern. Conclusions: Different adhesive systems yielded significantly different SBSs. Acid etching significantly increased the adhesion in laser treated enamel. No differences in SBS values were obtained between AdheSE® and ExciTE® without condition with PA. FuturaBond® NR and Xeno® V showed similar SBS, which was lower in comparison to the others adhesives. No correlation between enamel surface morphology and SBS values was observed, except when PA was used.

Metal Artifact Suppression in Dental Cone Beam Computed Tomography Images Using Image Processing Techniques.

Science.gov (United States)

Johari, Masoumeh; Abdollahzadeh, Milad; Esmaeili, Farzad; Sakhamanesh, Vahideh

2018-01-01

Dental cone beam computed tomography (CBCT) images suffer from severe metal artifacts. These artifacts degrade the quality of acquired image and in some cases make it unsuitable to use. Streaking artifacts and cavities around teeth are the main reason of degradation. In this article, we have proposed a new artifact reduction algorithm which has three parallel components. The first component extracts teeth based on the modeling of image histogram with a Gaussian mixture model. Striking artifact reduction component reduces artifacts using converting image into the polar domain and applying morphological filtering. The third component fills cavities through a simple but effective morphological filtering operation. Finally, results of these three components are combined into a fusion step to create a visually good image which is more compatible to human visual system. Results show that the proposed algorithm reduces artifacts of dental CBCT images and produces clean images.

Oral Lactobacilli and Dental Caries

Science.gov (United States)

Caufield, P.W.; Schön, C.N.; Saraithong, P.; Li, Y.; Argimón, S.

2015-01-01

Lactobacilli have been associated with dental caries for over a century. Here, we review the pertinent literature along with findings from our own study to formulate a working hypothesis about the natural history and role of lactobacilli. Unlike most indigenous microbes that stably colonize a host, lactobacilli appear to be planktonic, opportunistic settlers that can gather and multiply only in certain restrictive niches of the host, at least within the oral cavity. We postulate that the following essential requirements are necessary for sustained colonization of lactobacilli in humans: 1) a stagnant, retentive niche that is mostly anaerobic; 2) a low pH milieu; and 3) ready access to carbohydrates. Three sites on the human body meet these specifications: caries lesions, the stomach, and the vagina. Only a handful of Lactobacillus species is found in caries lesions, but they are largely absent in caries-free children. Lactobacilli present in caries lesions represent both a major contributor to caries progression and a major reservoir to the gastrointestinal (GI) tract. We extend the assertion from other investigators that lactobacilli found in the GI tract originate in the oral cavity by proposing that lactobacilli in the oral cavity arise from caries lesions. This, in turn, leads us to reflect on the health implications of the lactobacilli in the mouth and downstream GI and to ponder whether these or any of the Lactobacillus species are truly indigenous to the human GI tract or the oral cavity. PMID:25758458

Dental treatment for handicapped patients: sedation vs general anesthesia and update of dental treatment in patients with different diseases

OpenAIRE

Corcuera Flores, José Ramón; Delgado Muñoz, José María; Ruiz Villandiego, José Cruz; Maura Solivellas, Isabel; Machuca Portillo, Guillermo

2014-01-01

Dental treatment on Handicapped Patients is often difficult because many people with a wide range of ages (from children to the elderly) with different pathologies that can affect the oral cavity and differ widely are included in this group. This situation creates some controversy, because according to pathology, each patient will be treated differently depending on collaboration, general health status, age or medication used to treat this pathologies. According to this situation we can opt f...

Evaluation of metal-ceramic bond characteristics of three dental Co-Cr alloys prepared with different fabrication techniques.

Science.gov (United States)

Wang, Hongmei; Feng, Qing; Li, Ning; Xu, Sheng

2016-12-01

Limited information is available regarding the metal-ceramic bond strength of dental Co-Cr alloys fabricated by casting (CAST), computer numerical control (CNC) milling, and selective laser melting (SLM). The purpose of this in vitro study was to evaluate the metal-ceramic bond characteristics of 3 dental Co-Cr alloys fabricated by casting, computer numerical control milling, and selective laser melting techniques using the 3-point bend test (International Organization for Standardization [ISO] standard 9693). Forty-five specimens (25×3×0.5 mm) made of dental Co-Cr alloys were prepared by CAST, CNC milling, and SLM techniques. The morphology of the oxidation surface of metal specimens was evaluated by scanning electron microscopy (SEM). After porcelain application, the interfacial characterization was evaluated by SEM equipped with energy-dispersive spectrometry (EDS) analysis, and the metal-ceramic bond strength was assessed with the 3-point bend test. Failure type and elemental composition on the debonding interface were assessed by SEM/EDS. The bond strength was statistically analyzed by 1-way ANOVA and Tukey honest significant difference test (α=.05). The oxidation surfaces of the CAST, CNC, and SLM groups were different. They were porous in the CAST group but compact and irregular in the CNC and SLM groups. The metal-ceramic interfaces of the SLM and CNC groups showed excellent combination compared with those of the CAST group. The bond strength was 37.7 ±6.5 MPa for CAST, 43.3 ±9.2 MPa for CNC, and 46.8 ±5.1 MPa for the SLM group. Statistically significant differences were found among the 3 groups tested (P=.028). The debonding surfaces of all specimens exhibited cohesive failure mode. The oxidation surface morphologies and thicknesses of dental Co-Cr alloys are dependent on the different fabrication techniques used. The bond strength of all 3 groups exceed the minimum acceptable value of 25 MPa recommended by ISO 9693; hence, dental Co-Cr alloy

Assessment of pathology instruction in U.S. Dental hygiene educational programs.

Science.gov (United States)

Jacobs, Barbara B; Lazar, Ann A; Rowe, Dorothy J

2015-04-01

To assess the instruction of pathology content in entry-level and advanced practitioner dental hygiene educational programs and the program directors' perceptions whether their graduates are adequately prepared to meet the increasingly complex medical and oral health needs of the public. A 28-question survey of instructional content and perceptions was developed and distributed using Qualtrics® software to the 340 directors of entry-level and advanced practitioner dental hygiene programs in the US. Respondents rated their level of agreement to a series of statements regarding their perceptions of graduates' preparation to perform particular dental hygiene services associated with pathology. Descriptive statistics for all 28 categorical survey questions were calculated and presented as the frequency (percentage). Of the 340 directors surveyed, 130 (38%) responded. Most entry-level respondents (53%) agreed or strongly agreed (29%) that their graduates were adequately prepared to meet the complex medical and oral health needs of the public, while all respondents of advanced practitioner programs strongly agreed. More respondents strongly agreed to statements related to clinical instruction than to didactic courses. While 64% of respondents agreed that their graduates were prepared to practice unsupervised, if it were legally allowed, 21% were ambivalent. The extent of pathology instruction in entry-level programs varied, but most used traditional formats of instruction, educational resources and assessments of educational outcomes. Advanced practitioner programs emphasized histological and clinical examination of oral lesions and patient case studies. Strengthening pathology instruction would ensure that future generations of dental hygienists would be adequately prepared to treat medically compromised patients. Copyright © 2015 The American Dental Hygienists’ Association.

Microbiomics of Oral Biofilms: Driving The Future of Dental Research

Directory of Open Access Journals (Sweden)

Chaminda Jayampath Seneviratne

2017-09-01

Full Text Available Oral infectious diseases such as dental caries, periodontal disease, endodontic infections, oral candidiasis and peri-implantitis cause major health problems worldwide. All of these infectious diseases are associated with the biofilm growth mode of the oral pathogens. In the past, researchers often attempted to examine the association of single pathogens with particular dental diseases such as in the case of Streptococcus mutans acting as an aetiological agent for dental caries and the so-called “red-complex” bacteria for periodontal disease. However, with the recent advent of OMICS biology techniques such as genomics, transcriptomics, proteomics, it is possible to gain new insights into the host-microbial interaction, microbial community structure and composition in the oral cavity. The new studies on oral microbiomics can unravel the facets of the aetiopathology of oral diseases as never seen before. This mini-review will provide an history and overview of some of the existing DNA sequencing platforms employed to study the microbiomics of oral biofilms and the exciting future ahead for dental research.

Dental Anomalies: An Update

Directory of Open Access Journals (Sweden)

Fatemeh Jahanimoghadam

2016-01-01

Full Text Available Dental anomalies are usual congenital malformation that can happen either as isolated findings or as a part of a syndrome. Developmental anomalies influencing the morphology exists in both deciduous and permanent dentition and shows different forms such as gemination, fusion, concrescence, dilaceration, dens evaginatus (DE, enamel pearls, taurodontism or peg-shaped laterals. All These anomalies have clinical significance concerning aesthetics, malocclusion and more necessary preparing of the development of dental decays and oral diseases. Through a search in PubMed, Google, Scopus and Medline, a total of eighty original research papers during 1928-2016 were found with the keywords such as dental anomaly, syndrome, tooth and hypodontia. One hundred review titles were identified, eighty reviews were retrieved that were finally included as being relevant and of sufficient quality. In this review, dental anomalies including gemination, fusion, concrescence, dilaceration, dens invaginatus, DE, taurodontism, enamel pearls, fluorosis, peg-shaped laterals, dentinal dysplasia, regional odontodysplasia and hypodontia are discussed. Diagnosing dental abnormality needs a thorough evaluation of the patient, involving a medical, dental, familial and clinical history. Clinical examination and radiographic evaluation and in some of the cases, specific laboratory tests are also needed. Developmental dental anomalies require careful examination and treatment planning. Where one anomaly is present, clinicians should suspect that other anomalies may also be present. Moreover, careful clinical and radiographical examination is required. Furthermore, more complex cases need multidisciplinary planning and treatment.

A survey on education in cariology for undergraduate dental students in Europe

NARCIS (Netherlands)

Schulte, A.G.; Buchalla, W.; Huysmans, M.C.D.N.J.M.; Amaechi, B.T.; Sampaio, F.; Vougiouklakis, G.; Pitts, N.B.

2011-01-01

The aim of the survey was to collect relevant information about education in cariology for dental undergraduate students in Europe. The ORCA/ADEE cariology curriculum group prepared a questionnaire that was mailed in 2009 to 179 European dental schools. One hundred and twenty-three dental schools

Algunos riesgos durante el embarazo en relación con la enfermedad periodontal y la caries dental en Yemen Some risks during pregnancy related to periodontal disease and dental cavities in Yemen

Directory of Open Access Journals (Sweden)

Maribel de las Mercedes Bastarrechea Milián

2009-12-01

Full Text Available Yemen es un país con grandes diferencias regionales en su estructura social, económica y de alfabetización, lo cual se demuestra en los índices de mortalidad materna, mortalidad infantil y morbilidad de los niños menores de 5 años y las existentes necesidades para el cuidado de salud de su población. Teniendo en cuenta esta situación nos propusimos valorar cómo influyen en el estado de salud bucal de la embarazada algunos riesgos biosociales identificados en la bibliografía. Para ello se realizó un estudio analítico transversal y fueron estudiadas todas las embarazadas encontradas en el Al Wahdah Teaching Hospital y en el policlínico de atención prenatal de Kormarzar, ambos situados en la ciudad de Adén, Yemen, durante un período de 8 meses. Las gestantes fueron clasificadas según nivel de riesgo (alto, moderado y bajo y estos fueron relacionados con la presencia de caries dental y enfermedad periodontal.Yemen is a country with great regional differences in its social, economic and literacy structure, which is demonstrated in death mother mortality, children mortality of children aged younger than 5 and the present needs for health care of its population. Taking into account this situation our objective was to value how some biosocial risk factors identified in the bibliography may influence on the buccal health status in the pregnant. Thus, a cross-sectional analytical study was conducted and also all pregnant seen in the Al Wahdah Teaching Hospital and in prenatal care polyclinic in Kormazar, both located in Aden city, Yemen during 8 months. Pregnants were classified according the risk level (high, moderate and low and these were related to presence of dental cavities and periodontal disease.

Dentistry investigations of teeth and dental prostheses using OCT

Science.gov (United States)

Sinescu, C.; Duma, V.-F.; Canjau, S.; Dobre, G.; Demian, D.; Cernat, R.; Negrutiu, M. L.; Todea, C.; Topala, F. I.; Hutiu, Gh.; Bradu, A.; Podoleanu, A. G.

2016-04-01

We present some of our recent investigations in Dental Medicine using Optical Coherence Tomography (OCT). Time Domain (TD), Spectral Domain (SD), and Swept Source (SS) OCT in-house developed systems are being used, for both ex vivo and in vivo investigations in the oral cavity. We study ex vivo the interface between the tooth and the dental sealant and demonstrate the limitations of the X-rays investigations that are now the gold standard for such procedures. Using OCT, defects in the interface that cannot be identified in radiographs can be determined both as position and magnitude. The drilling process of teeth can also be characterized in real time using OCT, to monitor the remaining dentin thickness (RDT) in order to avoid opening the pulp chamber. We demonstrate in this respect that an RDT of 0.5 mm is the minimum value to assure the integrity of the dentin wall between the drilled cavity and the pulp chamber; at an RDT of 0.3 mm or less a fracture is initiated, the dentin is punctured and endodontic treatment must follow. In vivo OCT investigations in the oral cavity were also performed (i.e., for metalloceramic prostheses and for ceramic inlay tooth interfaces), with the low cost, light weight and versatile handheld probes with 1D galvoscanners that we have developed and applied for a range of in-house developed OCT systems, in various clinical applications. They are briefly discussed, as well as some of our current and future work in the field, including for studies of soft tissue in the mouth.

The bacteremia of dental origin and its implications in the appearance of bacterial endocarditis

Science.gov (United States)

Mang-de la Rosa, María R.; Castellanos-Cosano, Lizett; Romero-Perez, María J.

2014-01-01

Numerous systemic diseases may affect the oral cavity and vice versa,in particular severe diseases that involve the heart valve. In these cases, additional measures or a modification to our dental treatment need to be taken. We are aware of various diseases that can cause the emergence of bacterial endocarditis (BE), such as; rheumatic fever, valve lesions due to intravenous drug use, Kawasaki disease and valve surgery, among others. Due to its severity when it is not taken into account in dental treatment, we intend to show the evolution of the antimicrobial prophylaxis towards this condition. Furthermore, we intend to publish the current guidelines of institutions and societies which increasingly encourage rational antimicrobial use. In addition, we intend to examine the evidence of the possible origins of this disease during dental treatment and at the same time describe the necessary considerations that need to be taken during dental treatment. Key words:Endocarditis, antibiotic profilaxis, dental treatment. PMID:24121925

The investigation of Helicobacter pylori in the dental biofilm and saliva samples of children with dyspeptic complaints

OpenAIRE

Aksit B?cak, Damla; Akyuz, Serap; K?ratl?, Binnur; Usta, Merve; Urganci, Nafiye; Alev, Burcin; Yarat, Aysen; Sahin, Fikrettin

2017-01-01

Background The oral cavity can be an extra-gastric reservoir for Helicobacter pylori (H.pylori). This can play a role in the pathogenesis of halitosis, glossitis, recurrent aphthous stomatitis, and dental caries. The present study was conducted to detect the presence of H.pylori within the dental biofilm and in saliva samples collected from children suffering from dyspepsia and children without any gastrointestinal complaints. Associations with gastric infection, halitosis, and some oral para...

General characteristics of dental morbidity in children against orthodontic treatment

Directory of Open Access Journals (Sweden)

Kovach I.V.

2016-03-01

Full Text Available A wide spread of orthodontic treatment showed a fairly high risk of complications developed from the use of various devices. The aim of our study was to determine the general characteristics of dental morbidity in children with orthodontic treatment. According to the survey the most common pathologies in children with orthodontic problems are dental caries (87,8-92,9% and chronic catarrhal gingivitis (81.2-84.1%. The prevalence of different types of diseases of the mucous membrane and soft tissues of the oral cavity in children surveyed was 30.5-32.9%. Non-caries lesions of dental hard tissues occurred in 39.5-40.9% of the children surveyed, local enamel hypoplasia was observed in 42.9%, systemic enamel hypoplasia made up 17.8%, signs of hypersensitivity of enamel were found in 9.6%, and the wedge defects – in two children.

Dental care for children with autism spectrum disorder

Directory of Open Access Journals (Sweden)

Amrita Widyagarini

2017-09-01

Full Text Available Background: Providing dental treatment for children with autism spectrum disorder (ASD represents a challenge for dentists. In the dental care of such children, the treatment plans implemented are usually determined by several factors, including: the type of autism spectrum disorder, the degree of patient cooperation, dentist/patient communication, the required treatment, self-care skills and parental/dentist support. Purpose: The purpose of this case report was to report the dental care delivered in the cases of two pediatric patients with ASD. Case 1: A 10.7 year-old boy with a nonverbal form of ASD who was experiencing recurrent pain in his lower left posterior tooth and also presented a blackened tooth. Case 2: A 9.6 year-old boy with a nonverbal form of ASD suffering from numerous painful cavities. Case management 1: On the day of the first visit, the boy was the subject of several behavioral observations. During the day of the second visit, he underwent a brief intraoral examination at a dental unit in order to arrive at a temporary diagnosis before appropriate was decided upon treatment in consultation with his parents. The implemented treatment plans comprised dental extraction and preventive restoration under general anesthesia. Case management 2: On the first visit, the boy underwent behavioral observations followed by early intraoral examination involving physical restraint approach. During the second visit, several treatment plans such as: general anesthesia, tooth extraction, restoration, and pulp-capping treatment were formulated. Conclusion: It can be concluded that general anesthesia was considered an appropriate dental treatment plan since the two patients in question were extremely co-operative during the necessary procedures. In other words, pediatric dental care treatment plans in cases of ASD should be determined by clearly-defined criteria, specifically the benefits and risks of the treatment plans for the safety of both

Quantum state detection and state preparation based on cavity-enhanced nonlinear interaction of atoms with single photon

Science.gov (United States)

Hosseini, Mahdi

Our ability to engineer quantum states of light and matter has significantly advanced over the past two decades, resulting in the production of both Gaussian and non-Gaussian optical states. The resulting tailored quantum states enable quantum technologies such as quantum optical communication, quantum sensing as well as quantum photonic computation. The strong nonlinear light-atom interaction is the key to deterministic quantum state preparation and quantum photonic processing. One route to enhancing the usually weak nonlinear light-atom interactions is to approach the regime of cavity quantum electrodynamics (cQED) interaction by means of high finesse optical resonators. I present results from the MIT experiment of large conditional cross-phase modulation between a signal photon, stored inside an atomic quantum memory, and a control photon that traverses a high-finesse optical cavity containing the atomic memory. I also present a scheme to probabilistically change the amplitude and phase of a signal photon qubit to, in principle, arbitrary values by postselection on a control photon that has interacted with that state. Notably, small changes of the control photon polarization measurement basis by few degrees can substantially change the amplitude and phase of the signal state. Finally, I present our ongoing effort at Purdue to realize similar peculiar quantum phenomena at the single photon level on chip scale photonic systems.

Teaching atraumatic restorative treatment in U.S. dental schools: a survey of predoctoral pediatric dentistry program directors.

Science.gov (United States)

Kateeb, Elham T; Warren, John J; Damiano, Peter; Momany, Elizabeth; Kanellis, Michael; Weber-Gasparoni, Karin; Ansley, Tim

2013-10-01

The International Dental Federation and World Health Organization have promoted the use of Atraumatic Restorative Treatment (ART) in modern clinical settings worldwide. In the United States, the practice of ART is not believed to be widely used, which may be a result of little attention given to ART training in predoctoral pediatric dentistry curricula in U.S. dental schools. This study investigated the extent of clinical and didactic instruction on ART provided in U.S. dental schools by surveying the predoctoral pediatric dentistry programs in 2010. Of the fifty-seven directors asked to complete the survey, forty-four responded for a response rate of 77 percent. Of these forty-four programs, 66 percent reported providing clinical training on ART, though only 14 percent provide this training often or very often. The types of ART training provided often or very often included interim treatment (18 percent) and single-surface cavities (14 percent) in primary teeth. However, ART was said to be rarely taught as a definitive treatment in permanent teeth (2 percent). Attitude was a major predictor, for clinical training provided and using professional guidelines in treatment decisions were associated with a positive attitude towards ART. These predoctoral pediatric dentistry programs used ART mainly in primary, anterior, and single-surface cavities and as interim treatment. As ART increases access of children to dental care, the incorporation of the ART approach into the curricula of U.S. dental schools should be facilitated by professional organizations.

Evidence of helicobacter pylori infection in dental plaque and gastric mucosa

International Nuclear Information System (INIS)

Siddiq, M.; Haseeb-ur-Rehman; Mahmood, A.

2004-01-01

Objective: To determine the presence of Helicobacter pylori (H. pylori) in dental plaque of individuals suffering from H. pylori associated gastric disease. Patients and Methods: Patients presenting with symptoms/signs of chronic gastritis were included in the study. Specimens of dental plaque and gastric biopsy were collected from all the patients. The dental plaque specimen was processed for helicourease test and the gastric biopsy specimens were processed both for the helicourease test and histopathology. Results: Out of all patients studied (n=52), 32 (61.53%) were positive for helicourease test with gastric biopsy while 48 (92.30%) were positive with dental plaque. The histopathology of gastric biopsy showed H. pylori associated chronic active gastritis in 42 (80.76%) patients. Eight (15.38%) patients showed chronic active gastritis which was not associated with H. pylori while in 2 (3.84%) patients the gastric biopsy specimen was unremarkable. Conclusion: Majority of the patients have possible H. pylori colonization in dental plaque while about two-thirds have H. pylori associated chronic active gastritis. Oral cavity may be the first place for colonization and then the infection involves the gastric mucosa. (author)

Surface preparation of niobium

International Nuclear Information System (INIS)

Kneisel, P.

1980-01-01

Any discussion of surface preparation for superconducting rf-surfaces is certainly connected with the question what is the best recipe for achieving high Q-values and high break-down fields. Since the break-down in a cavity is not understood so far and because several mechanisms play a role, it also is not possible to give one recipe which always works. Nevertheless in the past certain preparation techniques for niobium surfaces have been developed and certain rules for preparation can be applied. In the following the to-days state of the art will be described and it is attempted to give a short description of the surface in conjunction with the methods of surface treatments, which generally can be applied to niobium cavities. (orig./WTR)

Role of dental plaque, saliva and periodontal disease in Helicobacter pylori infection.

Science.gov (United States)

Anand, Pradeep S; Kamath, Kavitha P; Anil, Sukumaran

2014-05-21

Helicobacter pylori (H. pylori) infection is one of the most common bacterial infections in humans. Although H. pylori may be detected in the stomach of approximately half of the world's population, the mechanisms of transmission of the microorganism from individual to individual are not yet clear. Transmission of H. pylori could occur through iatrogenic, fecal-oral, and oral-oral routes, and through food and water. The microorganism may be transmitted orally and has been detected in dental plaque and saliva. However, the role of the oral cavity in the transmission and recurrence of H. pylori infection has been the subject of debate. A large number of studies investigating the role of oral hygiene and periodontal disease in H. pylori infection have varied significantly in terms of their methodology and sample population, resulting in a wide variation in the reported results. Nevertheless, recent studies have not only shown that the microorganism can be detected fairly consistently from the oral cavity but also demonstrated that the chances of recurrence of H. pylori infection is more likely among patients who harbor the organism in the oral cavity. Furthermore, initial results from clinical trials have shown that H. pylori-positive dyspeptic patients may benefit from periodontal therapy. This paper attempts to review the current body of evidence regarding the role of dental plaque, saliva, and periodontal disease in H. pylori infection.

Multipartite quantum correlations among atoms in QED cavities

Science.gov (United States)

Batle, J.; Farouk, A.; Tarawneh, O.; Abdalla, S.

2018-02-01

We study the nonlocality dynamics for two models of atoms in cavity quantum electrodynamics (QED); the first model contains atoms in a single cavity undergoing nearest-neighbor interactions with no initial correlation, and the second contains atoms confined in n different and noninteracting cavities, all of which were initially prepared in a maximally correlated state of n qubits corresponding to the atomic degrees of freedom. The nonlocality evolution of the states in the second model shows that the corresponding maximal violation of a multipartite Bell inequality exhibits revivals at precise times, defining, nonlocality sudden deaths and nonlocality sudden rebirths, in analogy with entanglement. These quantum correlations are provided analytically for the second model to make the study more thorough. Differences in the first model regarding whether the array of atoms inside the cavity is arranged in a periodic or open fashion are crucial to the generation or redistribution of quantum correlations. This contribution paves the way to using the nonlocality multipartite correlation measure for describing the collective complex behavior displayed by slightly interacting cavity QED arrays.

Preparing Schrodinger cat states by parametric pumping

Science.gov (United States)

Leghtas, Zaki; Touzard, Steven; Pop, Ioan; Vlastakis, Brian; Zalys-Geller, Evan; Albert, Victor V.; Jiang, Liang; Frunzio, Luigi; Schoelkopf, Robert J.; Mirrahimi, Mazyar; Devoret, Michel H.

2014-03-01

Maintaining a quantum superposition state of light in a cavity has important applications for quantum error correction. We present an experimental protocol based on parametric pumping and Josephson circuits, which could prepare a Schrodinger cat state in a cavity. This is achieved by engineering a dissipative environment, which exchanges only pairs or quadruples of photons with our cavity mode. The dissipative nature of this preparation would lead to the observation of a dynamical Zeno effect, where the competition between a coherent drive and the dissipation reveals non trivial dynamics. Work supported by: IARPA, ARO, and NSF.

Rehabilitación dental y trastornos temporomandibulares en adolescentes de Puebla, México / Dental rehabilitations and temporomandibular disorders in adolescents of Puebla, Mexico

Directory of Open Access Journals (Sweden)

Gabriel Muñoz Q

2014-05-01

into tmds (cdi/tmd, and the cpod index was used to determine cavities. Two groups were formed: one exposed to dental rehabilitation (74 and one group unexposed (79. Follow-ups were performed two weeks, three months and six months after dental rehabilitation. Descriptive statistics were used and the relative risk was calculated with confidence intervals at 95%. Included in the exposed group were tmd-free adolescents in whom it was necessary to carry out dental rehabilitation treatment on rear teeth with cavities using enamel and dentin to fill in pits and fissures. Included in the unexposed group were adolescents paired with the exposed group based on age and sex, tmd-free and without the need for dental rehabilitation. Results: The incidence of tmd two weeks subsequently in the exposed group (18.9% was greater in contrast with the unexposed group (5.0%. The relative risk of carrying out tmd on adolescents rehabilitated with resin two weeks after rehabilitation was 2.412 (C.I. 95% 1.001-5.81 times more than in those that did not undergo rehabilitation. Conclusion: Dental rehabilitation is a minimum risk factor for carrying out tmd in the short term (two weeks after the procedure, as this disease induced by rehabilitation is acute and self-limiting

SU-F-BRB-15: Dosimetric Study of Radiation Therapy for Head/Neck Patients with Metallic Dental Fixtures

Energy Technology Data Exchange (ETDEWEB)

Lu, L; Allan, E; Putten, M Van; Gupta, N; Blakaj, D [OH State University, Columbus, OH (United States)

2015-06-15

Purpose: To investigate the dose contributions of scattered electrons from dental amalgams during head and neck radiotherapy, and to evaluate the protective role of dosimetric dental stents during treatment to prevent oral mucositis. Methods: A phantom was produced to accurately simulate the oral cavity and head. The oral cavity consisted of a tissue equivalent upper and lower jaw and complete set of teeth. A set of 4 mm ethylene copolymer dosimetric stents was made for the upper and lower teeth. Five removable gold caps were fitted to apposing right molars, and the phantom was crafted to accomodate horizontal and vertical film for 2D dosimetry and NanoDot dosimeter for recording point doses. The head was simulated using a small cylindrical glass water bath. CT simulation was performed on the phantom with and without metal fittings and, in each case, with and without the dental stent. The CT image sets were imported into Eclipse treatment planning system for contouring and treatment planning, and a 9-field IMRT treatment plan was developed for each scenario. These plans were delivered using a Varian TrueBeam linear accelerator. Doses were recorded using GafChromic EBT2 films and NanoDot dosimeters. Results: The measurements revealed a 43% relative increase in dose measured adjacent to the metal fixtures in the horizontal plane without the use of the dental stent. This equates to a total dose of 100 Gy to the oral mucosa during a standard course of definitive radiotherapy. To our knowledge, this is the first dosimetric analysis of dental stents using an anatomically realistic phantom and modern beam arrangement. Conclusion: These results support the use of dosimetric dental stents in head and neck radiotherapy for patients with metallic dental fixtures as a way to effectively reduce dose to nearby mucosal surfaces and, hence, reduce the risk and severity of mucositis.

SU-F-BRB-15: Dosimetric Study of Radiation Therapy for Head/Neck Patients with Metallic Dental Fixtures

International Nuclear Information System (INIS)

Lu, L; Allan, E; Putten, M Van; Gupta, N; Blakaj, D

2015-01-01

Purpose: To investigate the dose contributions of scattered electrons from dental amalgams during head and neck radiotherapy, and to evaluate the protective role of dosimetric dental stents during treatment to prevent oral mucositis. Methods: A phantom was produced to accurately simulate the oral cavity and head. The oral cavity consisted of a tissue equivalent upper and lower jaw and complete set of teeth. A set of 4 mm ethylene copolymer dosimetric stents was made for the upper and lower teeth. Five removable gold caps were fitted to apposing right molars, and the phantom was crafted to accomodate horizontal and vertical film for 2D dosimetry and NanoDot dosimeter for recording point doses. The head was simulated using a small cylindrical glass water bath. CT simulation was performed on the phantom with and without metal fittings and, in each case, with and without the dental stent. The CT image sets were imported into Eclipse treatment planning system for contouring and treatment planning, and a 9-field IMRT treatment plan was developed for each scenario. These plans were delivered using a Varian TrueBeam linear accelerator. Doses were recorded using GafChromic EBT2 films and NanoDot dosimeters. Results: The measurements revealed a 43% relative increase in dose measured adjacent to the metal fixtures in the horizontal plane without the use of the dental stent. This equates to a total dose of 100 Gy to the oral mucosa during a standard course of definitive radiotherapy. To our knowledge, this is the first dosimetric analysis of dental stents using an anatomically realistic phantom and modern beam arrangement. Conclusion: These results support the use of dosimetric dental stents in head and neck radiotherapy for patients with metallic dental fixtures as a way to effectively reduce dose to nearby mucosal surfaces and, hence, reduce the risk and severity of mucositis

PROVIDING DENTAL CARE FOR CHILDREN WITH AUTISM SPECTRUM DISORDERS

Directory of Open Access Journals (Sweden)

Diana MURARU

2017-06-01

Full Text Available Given the increasing prevalence of autism spectrum disorders, it is realistic to assume that dental professionals are likely to treat individuals with this diagnosis. Understanding the complexities of this disorder and its behavioral manifestations is indispensable for dentists. The present article presents several characteristics of autism spectrum disorder that impact dental interventions, along with medical and behavioral alternatives to better manage the dental problems of children with autism spectrum disorder. A multidisciplinary approach and family support are important for planning a dental intervention for these patients in order to avoid anxiety. Knowledge on autism, the dentist-patient relationship and the individual preparation for dental interventions is useful for constructing a controllable medical experience

Visualisation of dental images

International Nuclear Information System (INIS)

Md Saion Salikin; Azuhar Ripin; Wan Hazlinda Ismail; Asmaliza Hashim; Norriza Mohd Isa; Suriany Sarmid

2005-01-01

Since the invention and the discovery of x-rays, physicians, surgeons and life scientists have been using images to diagnose and subsequently treat diseases. X-ray is also widely used in many imaging techniques to better understand basics anatomy, physiology and biology as well as testing and analytical work in physical science. In dentistry, x-ray technique has been employed to get a panoramic view of the whole teeth of a particular patient. A panoramic dental radiograph is very useful in dentistry for diagnostic purpose, denture preparation, as well as for orthodontic. Image visualisation is an important aspect especially for the dentists to analyse and proceed with a particulate dental treatment. In this project panoramic dental image obtained by using a standard phantom is visualised by using Interactive Data Language (IDL) software. A panoramic dental x-ray machine, Cranex3, is used to get a panoramic radiograph, which is subsequently digitized, by using Vidar digitizer (Sierra Plus). The 2D digitized image is enhance and apply other visualising techniques such as surface rendering and volume rendering technique using Interactive Data Language (IDL) software as a first step in 3D visualisation. In this paper, visualising of panoramic dental radiograph by using IDL is discussed in brief. (Author)

Xerostomy, dental caries and periodontal disease in HIV+ patients

Directory of Open Access Journals (Sweden)

Julio César Cavasin Filho

Full Text Available We studied xerostomy and its correlation with periodontal and dental cavity diseases in HIV patients, through measurement of salivary flow and through variables such as saliva buffer capacity, salivary pH, periodontal index, MDF index, dental carie risk and risk of periodontal disease. One hundred patients were analyzed. They were distributed into two groups: Group I (test - 50 patients evidently HIV+, from whom information was collected and analyzed regarding age, gender, skin color, habits, general and oral diseases, levels of T-CD4 lymphocytes, viral load and highly active antiretroviral therapy (HAART; and Group II - (control 50 HIV- patients, from whom information was collected and analyzed regarding age, gender, skin color, habits, general and oral diseases. In both groups, measurement of salivary flow, pH and buffer capacity was made. Group I presented high MDF, bacteria plaque and bleeding, with a greater susceptibility to the risks of oral cavities and periodontal disease. The salivary flow and the buffering capacity of the saliva were low, indicating a high level of xerostomy. Two important modifying factors influence these pathologies in an incisive way: one is immunossuppression and the other is HAART therapy. The control exhibited results that are closer to normality; it had better oral-health conditions.

[Serial clinical examinations as the main approach to dental caries prevention in children].

Science.gov (United States)

Skripkina, G I; Garifullina, A Zh

2015-01-01

Leading scientific and organizational prerequisites for the feasibility of clinical examination of the entire child population of the Russian Federation to the dentist is, above all, the high prevalence and intensity of dental diseases in children of all ages. As a result of many years of research and follow-up of children of preschool and school age we have proved the need to distinguish a group of children with zero activity of dental caries. The referring criteria are determined according to the results of comprehensive clinical and laboratory examination in order to determine the degree of risk of dental caries and individual caries resistance. The age-specific risk group is settled by "Stop caries" software. In order to optimize the preventive activities children are divided in 5 groups for routine preventive dental care. Unfortunately the efforts of modern dental services aimed at eliminating the consequences of caries process by filling cavities. Individualized preventive approach will increase the effectiveness of preventive measures and save public funds allocated in the amount of compulsory health insurance for pediatric dentistry.

Preparation Of Porous And Dense Bodies From Hydroxyapatite Powders Prepared Via Sol-Gel Technique

International Nuclear Information System (INIS)

Sopyan, Lis

2001-01-01

Hydroxyapatite (HA) ceramics is clinically proven and, thus, a reliable material for medical applications, that is, for use in dental and orthopedical surgery to fill cavities in bones. In this paper, we report a preliminary study on development of HA porous and dense materials manufactured using fine HA powders prepared via a sol-gel technique. In the preparation of HA porous bodies, slurries of the as-prepared powder were prepared with an adjusted loading ofHA, using Duramax of 0-3021 type as dispersant. After soaking cellulosic sponges into the slurry, the sponges were dried and then subjected to heat-treatment at 600 o C, followed by sintering at 1250 o C for I h. The apparent density of the porous bodies is 1.290 g/cm 3 , with a porosity of 59%. The sintering shrinkage is about 20% (in respect of dimension) and 44 % (in respect of volume). Morphological evaluation of the porous bodies showed that the samples contained macropores of 1-2 mm diameter and micropores of 1-2 μm diameter. The measurement of mechanical strength provided 1.31 ± 0.30 MPa. Subsequently, dense samples were prepared from the as-prepared powder. In this case, the powder was mixed with poly(vinyl alcohol) and distilled water to make a slurry. The mixture was mixed using Zirconia balls as the crusher for 2h. The suspension was then spray-dried, and well-dispersed powder was obtained. The powder was compressed uniaxially using cold pressing technique at 800 kglcm2 and the pellets obtained were sintered in air at : 250 o C for I h. The sintered dense bodies have apparent density of 2.855 g/cm 3 , with a 10% porosity. The flexural strength of the dense bodies measured on the specimens of riimension 2 mm x 2.5 mm gave rise to the considerable value of 57.7 MPa

STOMATOLOGIC ASPECTS IN THERAPY OF LOCALLY DISTRIBUTED CANCER OF ORAL CAVITY MUCUS

Directory of Open Access Journals (Sweden)

G. G. Matyakin

2013-01-01

Full Text Available Aim of the investigation: to improve prophylaxis of dental complications during the therapy in the patients with locally distributed cancer of oral cavity mucus.Materials. Results of sanation of oral cavity in 305 patients with cancer of oral and pharyngeal area are analyzed.Results. The best results are noted in the patients given surgical sanation before chemo-radial therapy. The most number of complications is observed when teeth were extracted after chemical therapy in the period of radial therapy at summary focal dose above 20 Gy as well as in the late periods after radial therapy.Conclusion. A complex of preventive measures with using haemostatic sponge with canamycin in such patients decreases the number of complications and the terms of healing of alveoli of extracted teeth.

Quench dynamics of a disordered array of dissipative coupled cavities.

Science.gov (United States)

Creatore, C; Fazio, R; Keeling, J; Türeci, H E

2014-09-08

We investigate the mean-field dynamics of a system of interacting photons in an array of coupled cavities in the presence of dissipation and disorder. We follow the evolution of an initially prepared Fock state, and show how the interplay between dissipation and disorder affects the coherence properties of the cavity emission, and show that these properties can be used as signatures of the many-body phase of the whole array.

Education About Dental Hygienists' Roles in Public Dental Prevention Programs: Dental and Dental Hygiene Students' and Faculty Members' and Dental Hygienists' Perspectives.

Science.gov (United States)

Pervez, Anushey; Kinney, Janet S; Gwozdek, Anne; Farrell, Christine M; Inglehart, Marita R

2016-09-01

In 2005, Public Act No. 161 (PA 161) was passed in Michigan, allowing dental hygienists to practice in approved public dental prevention programs to provide services for underserved populations while utilizing a collaborative agreement with a supervising dentist. The aims of this study were to assess how well dental and dental hygiene students and faculty members and practicing dental hygienists have been educated about PA 161, what attitudes and knowledge about the act they have, and how interested they are in additional education about it. University of Michigan dental and dental hygiene students and faculty members, students in other Michigan dental hygiene programs, and dental hygienists in the state were surveyed. Respondents (response rate) were 160 dental students (50%), 63 dental hygiene students (82%), 30 dental faculty members (26%), and 12 dental hygiene faculty members (52%) at the University of Michigan; 143 dental hygiene students in other programs (20%); and 95 members of the Michigan Dental Hygienists' Association (10%). The results showed that the dental students were less educated about PA 161 than the dental hygiene students, and the dental faculty members were less informed than the dental hygiene faculty members and dental hygienists. Responding dental hygiene faculty members and dental hygienists had more positive attitudes about PA 161 than did the students and dental faculty members. Most of the dental hygiene faculty members and dental hygienists knew a person providing services in a PA 161 program. Most dental hygiene students, faculty members, and dental hygienists wanted more education about PA 161. Overall, the better educated about the program the respondents were, the more positive their attitudes, and the more interested they were in learning more.

The fundamental science of nitrogen-doping of niobium superconducting cavities

Science.gov (United States)

Gonnella, Daniel Alfred

Doping of niobium superconducting RF cavities with impurities has been demonstrated to have the ability to significantly improve the cryogenic efficiency of the accelerating structures. Doping SRF cavities with nitrogen is a relatively simple additional step to cavity preparation that can make drastic improvements in a cavity's intrinsic quality factor, Q0. Nitrogen-doping consists of treating SRF cavities at high temperatures in a low nitrogen-atmosphere. This leads to two important effects: an improvement in Q0 at low fields, and the presence of an "anti-Q slope" in which the cryogenic efficiency of doped cavities actually improves at higher fields. After its initial discovery, nitrogen-doping showed real promise but many fundamental scientific questions remained about the process. Nitrogen-doped cavities consistently quenched at lower fields than un-doped cavities, cooling the cavities through their critical temperature slowly led to poor performance, and the mechanism behind the Q0 improvement was not well understood. This dissertation focuses on addressing these issues. Single-cell 1.3 GHz cavities were prepared with different nitrogen-dopings and their effects studied systematically. It was found that nitrogen-doping drastically lowers the mean free path of the RF penetration layer of the niobium, leading to a lowering of the temperature-dependent BCS resistance, RBCS, at low fields. Theoretical work to predict the anti-Q slope was compared with experimental results to more fundamentally understand the nature of the field dependence of RBCS. Nitrogen-doped cavities were found to have a much larger sensitivity of residual resistance from trapped magnetic flux than un-doped cavities. Fast cool downs with large spatial temperature gradients through Tc were found to more efficiently expel magnetic flux. The full dependence of this sensitivity to trapped magnetic flux was studied as a function of changing mean free path and found to be in good agreement with

Preparatory procedure and equipment for the European x-ray free electron laser cavity implementation

Directory of Open Access Journals (Sweden)

D. Reschke

2010-07-01

Full Text Available The European x-ray free electron laser is under construction at Deutsches Elektronen-Synchrotron (DESY. The electron beam energy of up to 17.5 GeV will be achieved by using superconducting accelerator technology. Final prototyping, industrialization, and new infrastructure are the actual challenges with respect to the accelerating cavities. This paper describes the preparation strategy optimized for the cavity preparation procedure in industry. For the industrial fabrication and preparation, several new hardware components have been already developed at DESY. The design and construction of a semiautomated rf-measurement machine for dumbbells and end groups are described. In a collaboration among FNAL, KEK, and DESY, an automatic cavity tuning machine has been designed and four machines are under construction. The functionality of these machines with special attention to safety aspects is described in this paper. A new high pressure rinsing system has been developed and is operational.

Effect of organoclay incorporation on dental resin morphology

International Nuclear Information System (INIS)

Oliveira, Nadja M.S.; Reis, Romulo P.B.; Leite, Itamara F.; Morais, Crislene R.S.; Silva, Suedina M.L.

2009-01-01

The objective of the present work was to incorporate nanosilicates in commercial dental resins in order to prepare dental nanocomposites competitive as commercial nanoparticulates dental resins. Thus, a silicate, Cloisite 20A (C20A), was incorporated in a microhybrid dental resin (Z100) and morphological properties of the nanocomposites evaluated as a function of the incorporation method and the amount of filler employed. The samples were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD results evidence that nanocomposites have been obtained and according to SEM results, the morphology of microhybrid resin was modified when C20A nanoparticulate was incorporated improve the size distribution and reduce the agglomeration of the particles. (author)

Dental hard tissue drilling by longitudinally excited CO2 laser

Science.gov (United States)

Uno, Kazuyuki; Yamamoto, Takuya; Akitsu, Tetsuya; Jitsuno, Takahisa

2017-07-01

We developed a longitudinally excited CO2 laser with a long optical cavity and investigated the drilling characteristics of dental hard tissue. The CO2 laser was very simple and consisted of a 45-cm-long alumina ceramic pipe with an inner diameter of 13 mm, a pulse power supply, a step-up transformer, a storage capacitance, a spark gap, and a long optical cavity with a cavity length of 175 cm. The CO2 laser produced a short pulse that had a spike pulse with the width of 337 ns and the energy of 1.9 mJ, a pulse tail with the length of 180 μs and the energy of 37.6 mJ, and a doughnut-like beam. In the investigation, a sample was a natural drying human tooth (enamel and dentine). In a processing system, a ZnSe focusing lens with the focal length of 50 mm was used and the location of the focal plane was that of the sample surface. In 1 pulse irradiation, the drilling characteristics depended on the fluence was investigated. In the enamel and dentin drilling, the drilling depth increased with the fluence. The 1 pulse irradiation with the fluence of 21.5 J/cm2 produced the depth of 79.3 μm in the enamel drilling, and the depth of 152.7 μm in the dentin drilling. The short-pulse CO2 laser produced a deeper drilling depth at a lower fluence than long-pulse CO2 lasers in dental hard tissue processing.

Biofilm and Dental Biomaterials

Directory of Open Access Journals (Sweden)

Marit Øilo

2015-05-01

Full Text Available All treatment involving the use of biomaterials in the body can affect the host in positive or negative ways. The microbiological environment in the oral cavity is affected by the composition and shape of the biomaterials used for oral restorations. This may impair the patients’ oral health and sometimes their general health as well. Many factors determine the composition of the microbiota and the formation of biofilm in relation to biomaterials such as, surface roughness, surface energy and chemical composition, This paper aims to give an overview of the scientific literature regarding the association between the chemical, mechanical and physical properties of dental biomaterials and oral biofilm formation, with emphasis on current research and future perspectives.

Self-cavity lasing in optically pumped single crystals of p-sexiphenyl

International Nuclear Information System (INIS)

Yanagi, Hisao; Tamura, Kenji; Sasaki, Fumio

2016-01-01

Organic single-crystal self-cavities are prepared by solution growth of p-sexiphenyl (p-6P). Based on Fabry-Pérot feedback inside a quasi-lozenge-shaped platelet crystal, edge-emitting laser is obtained under optical pumping. The multimode lasing band appears at the 0-1 or 0-2 vibronic progressions depending on the excitation conditions which affect the self-absorption effect. Cavity-size dependence of amplified spontaneous emission (ASE) is investigated with laser-etched single crystals of p-6P. As the cavity length of square-shaped crystal is reduced from 100 to 10 μm, ASE threshold fluence is decreased probably due to size-dependent light confinement in the crystal cavity.

Exogenous nitric oxide stimulates the odontogenic differentiation of rat dental pulp stem cells.

Science.gov (United States)

Sonoda, Soichiro; Mei, Yu-Feng; Atsuta, Ikiru; Danjo, Atsushi; Yamaza, Haruyoshi; Hama, Shion; Nishida, Kento; Tang, Ronghao; Kyumoto-Nakamura, Yukari; Uehara, Norihisa; Kukita, Toshio; Nishimura, Fusanori; Yamaza, Takayoshi

2018-02-21

Nitric oxide (NO) is thought to play a pivotal regulatory role in dental pulp tissues under both physiological and pathological conditions. However, little is known about the NO functions in dental pulp stem cells (DPSCs). We examined the direct actions of a spontaneous NO gas-releasing donor, NOC-18, on the odontogenic capacity of rat DPSCs (rDPSCs). In the presence of NOC-18, rDPSCs were transformed into odontoblast-like cells with long cytoplasmic processes and a polarized nucleus. NOC-18 treatment increased alkaline phosphatase activity and enhanced dentin-like mineralized tissue formation and the expression levels of several odontoblast-specific genes, such as runt related factor 2, dentin matrix protein 1 and dentin sialophosphoprotein, in rDPSCs. In contrast, carboxy-PTIO, a NO scavenger, completely suppressed the odontogenic capacity of rDPSCs. This NO-promoted odontogenic differentiation was activated by tumor necrosis factor-NF-κB axis in rDPSCs. Further in vivo study demonstrated that NOC-18-application in a tooth cavity accelerated tertiary dentin formation, which was associated with early nitrotyrosine expression in the dental pulp tissues beneath the cavity. Taken together, the present findings indicate that exogenous NO directly induces the odontogenic capacity of rDPSCs, suggesting that NO donors might offer a novel host DPSC-targeting alternative to current pulp capping agents in endodontics.

Dental Evidence in Forensic Identification – An Overview, Methodology and Present Status

Science.gov (United States)

Krishan, Kewal; Kanchan, Tanuj; Garg, Arun K

2015-01-01

Forensic odontology is primarily concerned with the use of teeth and oral structures for identification in a legal context. Various forensic odontology techniques help in the identification of the human remains in incidents such as terrorists’ attacks, airplane, train and road accidents, fires, mass murders, and natural disasters such as tsunamis, earth quakes and floods, etc. (Disaster Victim Identification-DVI). Dental structures are the hardest and well protected structures in the body. These structures resist decomposition and high temperatures and are among the last ones to disintegrate after death. The principal basis of the dental identification lies in the fact that no two oral cavities are alike and the teeth are unique to an individual. The dental evidence of the deceased recovered from the scene of crime/occurrence is compared with the ante-mortem records for identification. Dental features such as tooth morphology, variations in shape and size, restorations, pathologies, missing tooth, wear patterns, crowding of the teeth, colour and position of the tooth, rotations and other peculiar dental anomalies give every individual a unique identity. In absence of ante-mortem dental records for comparison, the teeth can help in the determination of age, sex, race/ethnicity, habits, occupations, etc. which can give further clues regarding the identity of the individuals. This piece of writing gives an overview of dental evidence, its use in forensic identification and its limitations. PMID:26312096

Improvements in dental care using a new mobile app with cloud services.

Science.gov (United States)

Lin, Chia-Yung; Peng, Kang-Lin; Chen, Ji; Tsai, Jui-Yuan; Tseng, Yu-Chee; Yang, Jhih-Ren; Chen, Min-Huey

2014-10-01

Traditional dental care, which includes long-term oral hygiene maintenance and scheduled dental appointments, requires effective communication between dentists and patients. In this study, a new system was designed to provide a platform for direct communication between dentists and patients. A new mobile app, Dental Calendar, combined with cloud services specific for dental care was created by a team constituted by dentists, computer scientists, and service scientists. This new system would remind patients about every scheduled appointment, and help them take pictures of their own oral cavity parts that require dental treatment and send them to dentists along with a symptom description. Dentists, by contrast, could confirm or change appointments easily and provide professional advice to their patients immediately. In this study, 26 dentists and 32 patients were evaluated by a questionnaire containing eight dental-service items before and after using this system. Paired sample t test was used for statistical analysis. After using the Dental Calendar combined with cloud services, dentists were able to improve appointment arrangements significantly, taking care of the patients with sudden worse prosthesis (p cloud services, provides efficient service to both dentists and patients, and helps establish a better relationship between them. It also helps dentists to arrange appointments for patients with sudden worsening of prosthesis function. Copyright © 2014. Published by Elsevier B.V.

The effect of magnification loupes on the performance of preclinical dental students.

Science.gov (United States)

Maggio, Margrit P; Villegas, Hilda; Blatz, Markus B

2011-01-01

optical magnifying devices such as magnification loupes are increasingly used in clinical practice and educational settings. However, scientific evidence to validate their benefits is limited. This study assessed the effect of dental magnification loupes on psychomotor skill acquisition during a preclinical operative dentistry course. the performance of first-year dental students was assessed during an Advanced Simulation Course (AS) using virtual reality-based technology (VRBT) training. The test group consisted of 116 dental students using magnification loupes (+MAG), while students not using them (-MAG, n = 116) served as the control. The following parameters were evaluated: number of successfully passing preparation procedures per course rotation, amount of time per tooth preparation, number of times students needed computer assistance and evaluation, and amount of time spent in the computer assistance and evaluation mode per procedure. Data were collected on each student through VRBT during the preparation procedure and stored on a closed network server computer. Unpaired t tests were used to analyze mean differences between the groups. In addition, student acceptance of magnification loupes was measured and evaluated through survey interpretation. +MAG students completed more preparations, worked faster per procedure, and used the computer-assisted evaluation less frequently and for shorter periods, therefore displaying greater overall performance. The survey revealed a high degree of student acceptance of using magnification. dental magnification loupes significantly enhanced student performance during preclinical dental education and were considered an effective adjunct by the students who used them.

Sexual harassment in Dentistry: prevalence in dental school

Directory of Open Access Journals (Sweden)

Cléa Adas Saliba Garbin

2010-10-01

Full Text Available OBJECTIVE: Sexual harassment is unlawful in all work and educational environments in most nations of the world. The goals of this study were to describe the sexual harassment prevalence and to evaluate the experiences and attitudes of undergraduate students in one dental school in Brazil. MATERIAL AND METHODS: An 18-item questionnaire was administered to 254 dental students with a completion rate of 82% (208. Students were requested to respond to questions about their background and academic level in dental school, their personal experiences with sexual harassment and their observation of someone else being sexually harassed. Bivariate statistical analyses were performed. RESULTS: Fifteen percent of the students reported being sexually harassed by a patient, by a relative of a patient or by a professor. Male students had 3 times higher probability of being sexually harassed than female student [OR=2.910 (1.113-7.611]. Additionally, 25.4% of the students reported witnessing sexual harassment at the school environment. The majority of students did not feel professionally prepared to respond to unwanted sexual behaviors. CONCLUSION: These findings demonstrate that sexual harassment can occur in a dental school setting. There is a need for ongoing sexual harassment education programs for students and university staff. Increased knowledge of sexual harassment during graduation can better prepare dental professionals to respond to sexual harassment during their practice.

Sexual harassment in dentistry: prevalence in dental school.

Science.gov (United States)

Garbin, Cléa Adas Saliba; Zina, Lívia Guimarães; Garbin, Artênio José Insper; Moimaz, Suzely Adas Saliba

2010-01-01

Sexual harassment is unlawful in all work and educational environments in most nations of the world. The goals of this study were to describe the sexual harassment prevalence and to evaluate the experiences and attitudes of undergraduate students in one dental school in Brazil. An 18-item questionnaire was administered to 254 dental students with a completion rate of 82% (208). Students were requested to respond to questions about their background and academic level in dental school, their personal experiences with sexual harassment and their observation of someone else being sexually harassed. Bivariate statistical analyses were performed. Fifteen percent of the students reported being sexually harassed by a patient, by a relative of a patient or by a professor. Male students had 3 times higher probability of being sexually harassed than female student [OR=2.910 (1.113-7.611)]. Additionally, 25.4% of the students reported witnessing sexual harassment at the school environment. The majority of students did not feel professionally prepared to respond to unwanted sexual behaviors. These findings demonstrate that sexual harassment can occur in a dental school setting. There is a need for ongoing sexual harassment education programs for students and university staff. Increased knowledge of sexual harassment during graduation can better prepare dental professionals to respond to sexual harassment during their practice.

Field dependent surface resistance of niobium on copper cavities

Directory of Open Access Journals (Sweden)

T. Junginger

2015-07-01

Full Text Available The surface resistance R_{S} of superconducting cavities prepared by sputter coating a niobium film on a copper substrate increases significantly stronger with the applied rf field compared to cavities of bulk material. A possible cause is that the thermal boundary resistance between the copper substrate and the niobium film induces heating of the inner cavity wall, resulting in a higher R_{S}. Introducing helium gas in the cavity, and measuring its pressure as a function of applied field allowed to conclude that the inner surface of the cavity is heated up by less than 120 mK when R_{S} increases with E_{acc} by 100  nΩ. This is more than one order of magnitude less than what one would expect from global heating. Additionally, the effects of cooldown speed and low temperature baking have been investigated in the framework of these experiments. It is shown that for the current state of the art niobium on copper cavities there is only a detrimental effect of low temperature baking. A fast cooldown results in a lowered R_{S}.

A clinical index for evaluating and monitoring dental erosion

DEFF Research Database (Denmark)

Larsen, I B; Westergaard, J; Stoltze, K

2000-01-01

This study describes a new fine-scaled system for classifying initial and advanced dental erosions. The system includes the use of study casts of the teeth in an epoxy resin with an accurate surface reproduction. The severity of erosion on each tooth surface is scored according to six grades...... of severity. In addition, the presence of a Class V restoration and dental erosion on the same surface increases the erosion score, as it is assumed that the need for restorative treatment can be caused by the erosion. A high inter-examiner agreement was found when the present scoring system was used by two...... of the oral cavity and are furthermore suitable for data analysis. The system is thereby well-suited for determining etiologic factors and monitoring the progression of erosion over time....

Application of Metagenomic Analyses in Dentistry as a Novel Strategy Enabling Complex Insight into Microbial Diversity of the Oral Cavity.

Science.gov (United States)

Burczynska, Aleksandra; Dziewit, Lukasz; Decewicz, Przemysław; Struzycka, Izabela; Wroblewska, Marta

2017-03-30

The composition of the oral microbiome in healthy individuals is complex and dynamic, and depends on many factors, such as anatomical location in the oral cavity, diet, oral hygiene habits or host immune responses. It is estimated at present that worldwide about 2 billion people suffer from diseases of the oral cavity, mainly periodontal disease and dental caries. Importantly, the oral microflora involved in local infections may spread and cause systemic, even life-threatening infections. In search for etiological agents of infections in dentistry, traditional approaches are not sufficient, as about 50% of oral bacteria are not cultivable. Instead, metagenomic analyses are particularly useful for studies of the complex oral microbiome - both in healthy individuals, and in patients with oral and dental diseases. In this paper we review the current and future applications of metagenomic studies in evaluation of both the composition of the oral microbiome as well as its potential pathogenic role in infections in dentistry.

Towards a specific approach to education in dental ethics: a proposal for organising the topics of biomedical ethics for dental education.

Science.gov (United States)

Gorkey, Sefik; Guven, Tolga; Sert, Gurkan

2012-01-01

Understanding dental ethics as a field separate from its much better known counterpart, medical ethics, is a relatively new, but necessary approach in bioethics. This need is particularly felt in dental education and establishing a curriculum specifically for dental ethics is a challenging task. Although certain topics such as informed consent and patient rights can be considered to be of equal importance in both fields, a number of ethical issues in dental practice are only remotely-if at all-relevant for medical practice. Therefore, any sound approach to education in dental ethics has to recognise the unique aspects of dental practice in order to meet the needs of dental students and prepare them for the ethical challenges they may face during their professional practice. With this goal in mind, this paper examines the approach of the authors to dental ethics education and proposes a system to organise the topics of biomedical ethics for dental education. While the authors' perspective is based on their experience in Turkey, the proposed system of classification is not a rigid one; it is open to interpretation in other contexts with different social, cultural and professional expectations. Therefore, the paper also aims to inspire discussion on the development of an ideal dental ethics curriculum at an international level.

An Automated 476 MHz RF Cavity Processing Facility at SLAC

CERN Document Server

McIntosh, P; Schwarz, H

2003-01-01

The 476 MHz accelerating cavities currently used at SLAC are those installed on the PEP-II B-Factory collider accelerator. They are designed to operate at a maximum accelerating voltage of 1 MV and are routinely utilized on PEP-II at voltages up to 750 kV. During the summer of 2003, SPEAR3 will undergo a substantial upgrade, part of which will be to replace the existing 358.54 MHz RF system with essentially a PEP-II high energy ring (HER) RF station operating at 476.3 MHz and 3.2 MV (or 800 kV/cavity). Prior to installation, cavity RF processing is required to prepare them for use. A dedicated high power test facility is employed at SLAC to provide the capability of conditioning each cavity up to the required accelerating voltage. An automated LabVIEW based interface controls and monitors various cavity and test stand parameters, increasing the RF fields accordingly such that stable operation is finally achieved. This paper describes the high power RF cavity processing facility, highlighting the features of t...

Evaluation of the surface structure of composite restorations in light of own pilot research

Directory of Open Access Journals (Sweden)

Chalas Renata

2016-09-01

Full Text Available Research on the dental restorative materials employed in remedying dental cavities has been conducted on many levels and areas, both with application of clinical and laboratory methods. One of the elements that determines whether the restoration may be degraded is the condition of its surface. The aim of the study was to assess the texture surface of composite restorations using a non-contact method of teeth models scanning. In this work, ten medium size cavities on the occlusal surfaces of molars in adult patients were prepared and restored with resin composite. Before undertaking the procedure and after the finishing and polishing of the restorations, impressions were taken and sent into the laboratory so as to prepare plaster casts. Every cast was then scanned utilizing the non-contact 3D surface measurement instrument so as to assess the texture surface of the restoration. The resulting three dimensional analyses of post-restoration models showed the correct marginal adaptation of resin composite dental material to the hard tooth structures and its smooth filling occlusal surface. Additional comparison of scans done before and after restoring the cavities allowed the calculating of differences in volume, mean and maximum heights. The applied method of analysis is thought to be helpful in the detailed evaluation of restoration dental material texture. Moreover, the enabled possibility of continuous observation is expedient for assessing the usefulness of the method in standard dental practice.

[Overview of researches for Helicobacter pylori in oral cavity and stomach].

Science.gov (United States)

Yang, Kaiyu; Li, Yuqing; Zhou, Xuedong

2014-06-01

Helicobacter pylori (H. pylori) is one of the most common pathogens in human and it is closely related to gastrointestinal diseases. It is essential for us to understand the transmission process of H. pylori to prevent its spreading. The oral cavity has been proposed as a reservoir for gastric H. pylori, which has been detected by culture and polymerase chain reaction (PCR) in both dental plaque and saliva. Some researchers have proposed H. pylori in oral cavity may play an important role in its transmission and reinfection. Oral-oral or fecal-oral transmission are thought to be the most possible transmit way. This review will discuss the evidence for the role of the oral cavity in the transmission of H. pylori, the difficulties encountered in addressing this topic and possible directions for future research. Oral H. pylori may also play a role in the diagnosis and prevention of deceases related to H. pylori such as gastritis, gastric ulcer and gastric carcinoma. The recent progresses in this area are also reviewed. Moreover, we also discussed the relationship between oral H. pylori and oral deceases like periodontal disease and oral ulcer.

Prevalence of Dental Caries and Designing the Interventional Strategies for School Children in Rural Konkan Region

Directory of Open Access Journals (Sweden)

Asawari Modak

2017-11-01

Full Text Available School remains an important setting offering an effective and efficient ways to reach over to children and through them, families and community members.(1 Dental caries is very common disease in childhood, interfering with food intake affecting physical development in the form of malnutrition, child’s school attendance and academic performance. Tooth decay or cavities caused by dental caries is an infectious disease and is diet and oral hygiene dependent. If left untreated result in toothache, permanent cavitations and children with active disease become adult with tooth decay. Also poor dentition and malocclusion decreases the masticatory performance effecting oral health and quality of life. Fortunately dental caries is both preventable and treatable with effective home care and regular access to preventive dental services. The present study was carried out in the rural area of Konkan region to assess the awareness regarding oral hygiene, prevalence of dental caries, to assess the masticatory performance.

Assessment of age based on the pulp cavity width of the maxillary central incisors

Directory of Open Access Journals (Sweden)

Uday Ginjupally

2014-01-01

Full Text Available Aims and Objectives: The aim of this study was to estimate the age of the patients belonging to the age group of 15 - 55 years, attending the Department of Oral Medicine and Radiology, St. Joseph Dental College and Hospital, Eluru, based on the radiographic evaluation of the pulp cavity width of the maxillary central incisors. Materials and Methods: The study group comprised of 120 subjects. Intraoral periapical radiographs of the maxillary central incisors were taken for all subjects, using the conventional paralleling angle technique and the pulp cavity width was measured at the cervical and middle third using a digital vernier caliper. The data obtained was subjected to correlation and regression analysis. Results: A negative linear relationship was obtained between the age and pulp cavity width (cervical third, r = -0.459 and middle third, r = -0.704. Cubic regression analysis was done and the regression formulae were obtained. A mean difference of 0.1 years was obtained between the estimated age and real age, indicating the reliability of the derived formula. Conclusion: It can be concluded that the width of the pulp cavity of maxillary central incisors are reliable for estimation of age.

Microbial profiling of dental plaque from mechanically ventilated patients.

Science.gov (United States)

Sands, Kirsty M; Twigg, Joshua A; Lewis, Michael A O; Wise, Matt P; Marchesi, Julian R; Smith, Ann; Wilson, Melanie J; Williams, David W

2016-02-01

Micro-organisms isolated from the oral cavity may translocate to the lower airways during mechanical ventilation (MV) leading to ventilator-associated pneumonia (VAP). Changes within the dental plaque microbiome during MV have been documented previously, primarily using culture-based techniques. The aim of this study was to use community profiling by high throughput sequencing to comprehensively analyse suggested microbial changes within dental plaque during MV. Bacterial 16S rDNA gene sequences were obtained from 38 samples of dental plaque sampled from 13 mechanically ventilated patients and sequenced using the Illumina platform. Sequences were processed using Mothur, applying a 97% gene similarity cut-off for bacterial species level identifications. A significant 'microbial shift' occurred in the microbial community of dental plaque during MV for nine out of 13 patients. Following extubation, or removal of the endotracheal tube that facilitates ventilation, sampling revealed a decrease in the relative abundance of potential respiratory pathogens and a compositional change towards a more predominantly (in terms of abundance) oral microbiota including Prevotella spp., and streptococci. The results highlight the need to better understand microbial shifts in the oral microbiome in the development of strategies to reduce VAP, and may have implications for the development of other forms of pneumonia such as community-acquired infection.

Dental Students' Knowledge of Resources for LGBT Persons: Findings from Three Dental Schools.

Science.gov (United States)

Feng, Xiaoying; Mugayar, Leda; Perez, Edna; Nagasawa, Pamela R; Brown, David G; Behar-Horenstein, Linda S

2017-01-01

Recently, there has been increased attention to including cultural diversity in the education of health professionals, including concern for lesbian, gay, bisexual, and transgender (LGBT) inclusion and visibility. Studies regarding cultural exposure and acceptance of LGBT populations have been concentrated in medicine, with findings showing that medical providers often graduate having missed the preparation required to care for LGBT persons. A visible, comprehensive, culturally competent environment in dental schools would help ensure that all oral health professionals and students are aware of services available to address the particular needs of LGBT students. The aims of this survey-based study conducted in 2015-16 were to determine dental students' perceptions regarding LGBT students' needs and to assess dental students' knowledge of resources for LGBT persons at three U.S. dental schools, one each in the Midwest, West, and South. Of the 849 students invited to participate, 364 completed the survey (338 dental, 26 dental hygiene), for an overall response rate of 43%. The response rate at individual schools ranged from 30% to 55%. The results showed perceptions of insufficient LGBT information, resources, and support at these institutions, especially at the Western school. There were significant differences among the three schools, with students at the Western school more than the other two schools perceiving that their institution was less aware of whether it met the academic, social support, and spiritual needs of LGBT students. There were no significant differences between LGBT and non-LGBT students' perceptions. The authors urge dental school administrators to explore the degree to which their programs teach respectful and caring behavior towards LGBT students and, by extension, LGBT patient populations.

Ultrashort pulse laser processing of hard tissue, dental restoration materials, and biocompatibles

Science.gov (United States)

Yousif, A.; Strassl, M.; Beer, F.; Verhagen, L.; Wittschier, M.; Wintner, E.

2007-07-01

During the last few years, ultra-short laser pulses have proven their potential for application in medical tissue treatment in many ways. In hard tissue ablation, their aptitude for material ablation with negligible collateral damage provides many advantages. Especially teeth representing an anatomically and physiologically very special region with less blood circulation and lower healing rates than other tissues require most careful treatment. Hence, overheating of the pulp and induction of microcracks are some of the most problematic issues in dental preparation. Up till now it was shown by many authors that the application of picosecond or femtosecond pulses allows to perform ablation with very low damaging potential also fitting to the physiological requirements indicated. Beside the short interaction time with the irradiated matter, scanning of the ultra-short pulse trains turned out to be crucial for ablating cavities of the required quality. One main reason for this can be seen in the fact that during scanning the time period between two subsequent pulses incident on the same spot is so much extended that no heat accumulation effects occur and each pulse can be treated as a first one with respect to its local impact. Extension of this advantageous technique to biocompatible materials, i.e. in this case dental restoration materials and titanium plasma-sprayed implants, is just a matter of consequence. Recently published results on composites fit well with earlier data on dental hard tissue. In case of plaque which has to be removed from implants, it turns out that removal of at least the calcified version is harder than tissue removal. Therefore, besides ultra-short lasers, also Diode and Neodymium lasers, in cw and pulsed modes, have been studied with respect to plaque removal and sterilization. The temperature increase during laser exposure has been experimentally evaluated in parallel.

Child rearing styles, dental anxiety and disruptive behaviour: an exploratory study

NARCIS (Netherlands)

Krikken, J.B.; Veerkamp, J.S.J.

2008-01-01

Aim: This was to explore the relation between children's dental anxiety, their behaviour during treatment and their parent's rearing style. Also the parents' preparation of the child for dental treatment was related to behaviour and parental rearing style. Methods: The parents of 100 children,

An audit of cavity and crown preparations and two direct restorations carried out by foundation dentists in the Oxford and Wessex Deaneries.

Science.gov (United States)

Burke, F J T; Mackenzie, L; Falcon, H; Priest, N; Palin, W M

2014-04-01

It is likely that many foundation dentists (FDs) will have completed only minimal amounts of restorative dentistry for a number of months immediately prior to commencing work as FDs. Thus this audit aimed to assess the performance of the FDs when they carried out a number of simulated clinical exercises: amalgam cavities and restoration; Class IV resin composite restorations; and full crown preparations for metal-ceramic restorations. A total of 67 FDs completed the assessments and some results did indicate a high level of concern and need for further evaluation of restorative practice.

Caries, Periodontal Disease, Supernumerary Teeth and Other Dental Disorders in Swedish Wild Boar (Sus scrofa).

Science.gov (United States)

Malmsten, A; Dalin, A-M; Pettersson, A

2015-07-01

Between January and December 2013, the dental and periodontal health of 99 Swedish wild boars (Sus scrofa) was investigated. Sampling occurred in conjunction with routine hunting at six large estates in the southern and middle parts of Sweden. All six of the estates use supplemental feeding. The weight of the animals, their sex and their dates of death were noted. Age was estimated using tooth eruption and tooth replacement patterns. The oral cavity was inspected and abnormalities were recorded on a dental chart modified for wild boars. The findings included supernumerary teeth, absence of teeth, mild class II malocclusion, severe tooth wear, periodontitis, calculus, caries, tooth fractures and the presence of enamel defects. Swedish wild boars suffer from different dental lesions and the impact of supplemental feeding on dental and periodontal health is still to be investigated. Copyright © 2015 Elsevier Ltd. All rights reserved.

Scanning electron microscopy evaluation of the interaction pattern between dentin and resin after cavity preparation using Er:YAG laser; Avaliacao, atraves de microscopia eletronica de varredura, do padrao de interacao dentina-resina em cavidades preparadas com laser de Er:YAG

Energy Technology Data Exchange (ETDEWEB)

Schein, Marcelo Thome

2001-07-01

The aim of this study was to describe the interaction pattern formed between dentin and resin on cavities prepared with an erbium laser (Er:YAG). The morphological aspect of the irradiated dentin after acid etching was also observed. Ten dentin disks were obtained from fresh extracted third molars. Each disk received two cavities, one prepared with a conventional high-speed drill, while the other cavity was obtained by the use of an Er:YAG laser (KaVo KEY Laser, KaVo Co.). The laser treatment was performed with 250 mJ/pulse, 4 Hz, non contact mode, focused beam, and a fine water mist was used. Five disks were prepared for morphological analysis of the acid etched dentin. The other five disks had their cavities restored with Single Bond (3M) followed by Z100 resin (3M). The specimens were observed under scanning electron microscopy after dentin-resin interface demineralization and deproteinization. It was observed that the morphological characteristics of the acid-etched irradiated dentin were not favorable to the diffusion of monomers through the collagen network. The dentin resin interfacial aspect of irradiated dentin, after acid etching, showed thin tags and scarce hybridization zones, which agreed with the morphology of the irradiated and acid-etched dentin substrate observed. (author)

Dental Calculus Arrest of Dental Caries.

Science.gov (United States)

Keyes, Paul H; Rams, Thomas E

An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. These observations further document the potential protective effects of dental calculus mineralization against dental caries.

Dental Calculus Arrest of Dental Caries

Science.gov (United States)

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. Materials and methods A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Results Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. Conclusions These observations further document the potential protective effects of dental calculus mineralization against dental caries. PMID:27446993

Squamous cell carcinoma of the oral cavity and oropharynx in patients aged 18-45 years: A case-control study to evaluate the risk factors with emphasis on stress, diet, oral hygiene, and family history.

Science.gov (United States)

Dholam, K P; Chouksey, G C

2016-01-01

Increasing incidence of squamous cell carcinoma (SCC) of the oral cavity and oropharynx is reported in young adults. However, there is a paucity regarding etiology and risk factors. To evaluate the exposure potential carcinogenic factors among a sample aged 45 years and younger, diagnosed with SCC of the oral cavity and oropharynx. Eighty-five case samples aged 18-45 years, diagnosed with SCC of the oral cavity and oropharynx were compared with 85 controls who had never had cancer, matched for age and sex. This study was conducted by questionnaire-based interviews. Questionnaire contained items about exposure to the following risk factors: Caries prevalence, oral hygiene status, dental trauma, dental visit, stress, family history of cancer, environmental exposure to potential carcinogens, diet, body mass index (BMI), habits such as smoking, tobacco chewing, betel quid/pan, or supari. Odds ratios (ORs) of oral and pharyngeal cancer and the corresponding 95% confidence intervals were estimated using multiple logistic regression models. Poral hygiene, stress, dental trauma, low BMI, family history of cancer, exposure to environmental carcinogens, and habit of placement of quid for 11-20 years. An increased risk of oral and pharyngeal cancer was seen in cases who had poor oral hygiene, stress, dental trauma, low BMI, family history of cancer, exposure to environmental carcinogens, and habit of placement of quid.

Preparation of a Bis-GMA-Free Dental Resin System with Synthesized Fluorinated Dimethacrylate Monomers

Directory of Open Access Journals (Sweden)

Shuzhen Luo

2016-12-01

Full Text Available With the aim of reducing human exposure to Bisphenol A (BPA derivatives in dentistry, a fluorinated dimethacrylate monomer was synthesized to replace 2,2-bis[4-(2-hydroxy-3-methacryloy-loxypropyl-phenyl]propane (Bis-GMA as the base monomer of dental resin. After mixing with reactive diluent triethyleneglycol dimethacrylate (TEGDMA, fluorinated dimethacrylate (FDMA/TEGDMA was prepared and compared with Bis-GMA/TEGDMA in physicochemical properties, such as double bond conversion (DC, volumetric shrinkage (VS, water sorption (WS and solubility (WSL, flexural strength (FS and modulus (FM. The results showed that, when compared with Bis-GMA based resin, FDMA-based resin had several advantages, such as higher DC, lower VS, lower WS, and higher FS after water immersion. All of these revealed that FDMA had potential to be used as a substitute for Bis-GMA. Of course, many more studies, such as biocompatibility testing, should be undertaken to prove whether FDMA could be applied in clinic.

Fundamental tests in Cavity Quantum Electrodynamics

CERN Multimedia

CERN. Geneva

2010-01-01

At the dawn of quantum physics, Einstein and Bohr had the dream to confine a photon in a box and to use this contraption in order to illustrate the strange laws of the quantum world. Cavity Quantum Electrodynamics has now made this dream real, allowing us to actually achieve in the laboratory variants of the thought experiments of the founding fathers of quantum theory. In our work at Ecole Normale Supérieure, we use a beam of Rydberg atoms to manipulate and probe non-destructively microwave photons trapped in a very high Q superconducting cavity. We realize ideal quantum non-demolition (QND) measurements of photon numbers, observe the radiation quantum jumps due to cavity relaxation and prepare non-classical fields such as Fock and Schrödinger cat states. Combining QND photon counting with a homodyne mixing method, we reconstruct the Wigner functions of these non-classical states and, by taking snapshots of these functions at increasing times, obtain movies of the decoherence process. These experiments ope...

[Correlation of dental age and anthropometric parametres of the overall growth and development in children].

Science.gov (United States)

Triković-Janjić, Olivera; Apostolović, Mirjana; Janosević, Mirjana; Filipović, Gordana

2008-02-01

Anthropometric methods of measuring the whole body and body parts are the most commonly applied methods of analysing the growth and development of children. Anthropometric measures are interconnected, so that with growth and development the change of one of the parameters causes the change of the other. The aim of the paper was to analyse whether dental development follows the overall growth and development and what the ratio of this interdependence is. The research involved a sample of 134 participants, aged between 6 and 8 years. Dental age was determined as the average of the sum of existing permanent teeth from the participants aged 6, 7 and 8. With the aim of analysing physical growth and development, commonly accepted anthropometric indexes were applied: height, weight, circumference of the head, the chest cavity at its widest point, the upper arm, the abdomen, the thigh and thickness of the epidermis. The dimensions were measured according to the methodology of the International Biological Programme. The influence of the pertinent variables' related size on the analysed variable was deter mined by the statistical method of multivariable regression. The middle values of all the anthropometric parametres, except for the thickness of the epidermis, were slightly bigger with male participants, and the circumference of the chest cavity was statistically considerably bigger (p development. There is a considerable positive correlation (R = 0.59) between dental age and anthropometric parameters of general growth and development, which confirms that dental development follows the overall growth and development of children, aged between 6 and 8 years.

The quest for high-gradient superconducting cavities

International Nuclear Information System (INIS)

Padamsee, H.

1999-01-01

Superconducting RF cavities excel in applications requiring continuous waves or long pulse voltages. Since power losses in the walls of the cavity increase as the square of the accelerating voltage, copper cavities become uneconomical as demand for high continuous wave voltage grows with particle energy. For these reasons, RF superconductivity has become an important technology for high energy and high luminosity accelerators. The state of art in performance of sheet metal niobium cavities is best represented by the statistics of more than 300 5-cell, 1.5-GHz cavities built for CEBAF. Key aspects responsible for the outstanding performance of the CEBAF cavities set are the anti-multipactor, elliptical cell shape, good fabrication and welding techniques, high thermal conductivity niobium, and clean surface preparation. On average, field emission starts at the electric field of 8.7 MV/m, but there is a large spread, even though the cavities received nominally the same surface treatment and assembly procedures. In some cavities, field emission was detected as low as 3 MV/m. In others, it was found to be as high as 19 MV/m. As we will discuss, the reason for the large spread in the gradients is the large spread in emitter characteristics and the random occurrence of emitters on the surface. One important phenomenon that limits the achievable RF magnetic field is thermal breakdown of superconductivity, originating at sub-millimeter-size regions of high RF loss, called defects. Simulation reveal that if the defect is a normal conducting region of 200 mm radius, it will break down at 5 MV/m. Producing high gradients and high Q in superconducting cavities demands excellent control of material properties and surface cleanliness. The spread in gradients that arises from the random occurrence of defects and emitters must be reduced. It will be important to improve installation procedures to preserve the excellent gradients now obtained in laboratory test in vertical cryostats

Dental Hygiene Program Directors' Perceptions of Graduate Dental Hygiene Education and Future Faculty Needs.

Science.gov (United States)

Wilder, Rebecca S.; Mann, Ginger; Tishk, Maxine

1999-01-01

A survey of 161 dental-hygiene-program directors investigated perceived future needs for faculty, preferences for type of faculty degree for selection and promotion, the extent to which master's programs are meeting those needs in both numbers and skills, and how the programs can better prepare graduates for the millennium. (MSE)

Cavity-QED interactions of two correlated atoms

Science.gov (United States)

Esfandiarpour, Saeideh; Safari, Hassan; Bennett, Robert; Yoshi Buhmann, Stefan

2018-05-01

We consider the resonant van der Waals (vdW) interaction between two correlated identical two-level atoms (at least one of which being excited) within the framework of macroscopic cavity quantum electrodynamics in linear, dispersing and absorbing media. The interaction of both atoms with the body-assisted electromagnetic field of the cavity is assumed to be strong. Our time-independent evaluation is based on an extended Jaynes–Cummings model. For a system prepared in a superposition of its dressed states, we derive the general form of the vdW forces, using a Lorentzian single-mode approximation. We demonstrate the applicability of this approach by considering the case of a planar cavity and showing the position dependence of Rabi oscillations. We also show that in the limiting case of weak coupling, our results reproduce the perturbative ones for the case where the field is initially in vacuum state while the atomic state is in a superposition of two correlated states sharing one excitation.

Novel surface coating materials for endodontic dental implant

International Nuclear Information System (INIS)

Fathi, M.H.; Mortazavi, V.; Moosavi, S.B.

2003-01-01

The aim of this study was to design and produce novel coating materials in order to obtain two goals including; improvement of the corrosion behavior of metallic dental endodontic implant and the bone osteointegration simultaneously. Stainless steel 316L (SS) was used as a metallic substrate and a novel Hydroxyapatite/Titanium (HA/Ti) composite coating was prepared on it. Structural characterization techniques including XRD, SEM and EDX were utilized to investigate the microstructure and morphology of the coating. Electrochemical tests were performed in physiological solutions in order to determine and compare the corrosion behavior of the coated and uncoated specimens as an indication of biocompatibility. Two types of endodontic implants including; SS with and without (HA/Ti) composite coating were prepared and subsequently implanted in the mandibular canine of 20 cats after completion of root canal treatment and osseous preparation. After a healing period of 4 months, osteointegration evaluation and histopathological interpretation was carried out using SEM and optical microscopy. Results indicate that the novel HA/Ti composite coating improves the corrosion behavior and biocompatibility of SS endodontic dental implant. The clinical evaluation (in vivo test) results showed that there was significant difference in osteointegration between coated and uncoated endodontic dental implants and average bone osteointegration of coated implants were more than uncoated implants. The histopathological results and bone tissue response to the coated implants was acceptable and it was concluded that HA/Ti composite coated SS could be used as well as an endodontic dental implant. (author)

Current trends in use of intracanal medications in dental care facilities: questionnaire-based survey on training dental hygienists at educational institutions.

Science.gov (United States)

Furusawa, Masahiro; Yoshida, Takashi; Hosokawa, Souhei; Ariizumi, Yuugo

2013-01-01

The success of root canal therapy is dependent not only on removal of infected pulp (pulpectomy) followed by root canal enlargement, but also on the pharmacological effects of intracanal medications. Various intracanal medications are used. Formaldehyde preparations such as formocresol were common in the past, but these are no longer used in Europe or the US due to the biological toxicity of formaldehyde. In this study, a questionnaire was used to determine current trends in the use of intracanal medications at dental care facilities where dental hygiene students undergo practical training. The questionnaire comprised questions regarding the types of frequently used intracanal medications and their methods of application at dental care facilities in Saitama and Shizuoka prefectures. The results indicated that calcium hydroxide preparations were more commonly used in Europe or the US. However, these results also revealed that formaldehyde preparations were frequently used, which slightly differs from the scenario in Europe and the US. This study revealed that multiple intracanal medications were used for root canal therapy. Furthermore, it was also observed that cotton plugs were generally used as applicator tips for intracanal medications, whereas the use of absorbent paper points was relatively uncommon. The results suggest that the cost of absorbent paper points needs to be reduced.

CONSIDERATIONS UPON CONTACT STRESS MODELLING IN DENTAL ARTICULATOR PAIRS

Directory of Open Access Journals (Sweden)

Carmen Ciornei

2012-05-01

Full Text Available A dental articulator is a mechanism which simulates the temporo-mandibular joint. The articulator is essential as it replicates the basic motions of the upper and lower mandibles, both revolve and translational motions. In the present paper the stresses from an articulator TMJ modelled as a bronze sphere into a cylindrical steel cavity are analyzed by two methods, first applying the Hertzian contact theory and then numerically, by means of finite element analysis using the simulation module in CATIA.

Oral, Maxillofacial and Dental Diseases in Captive Cheetahs (Acinonyx jubatus).

Science.gov (United States)

Steenkamp, G; Boy, S C; van Staden, P J; Bester, M N

2018-01-01

Descriptions of several oral, maxillofacial and dental conditions/diseases exist for a variety of captive large felids, but little is reported on the pathology of free roaming large felids. Apart from focal palatine erosions (FPEs) as initially described by Fitch and Fagan (1982) and some reference to absent incisor teeth, few data exist on diseases affecting the oral, maxillofacial and dental structures of cheetahs (Acinonyx jubatus), regardless of their captivity status. This study reports 18 different conditions affecting the teeth, bone and oral cavity soft tissue of cheetahs, based on initial assessment of 256 animals over 11 years (2002-2012) in South Africa and Namibia. This report excludes oral tumours or FPEs, but includes several acquired and developmental conditions never described before. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of dental restorative materials on total antioxidant capacity and calcium concentration of unstimulated saliva.

Science.gov (United States)

Ramezani, Gholam H; Moghadam, Mona-Momeni; Saghiri, Mohammad-Ali; Garcia-Godoy, Franklin; Asatourian, Armen; Aminsobhani, Mohsen; Scarbecz, Mark; Sheibani, Nader

2017-01-01

To evaluate the effect of dental amalgam and composite restorations on total antioxidant capacity (TAC) and calcium (Ca) ion concentration of unstimulated saliva. Forty-eight children aged 6-10 years selected and divided into three groups of sixteen (8 males, 8 females). In group A and B, samples consisted of two class II dental composite or amalgam restorations, while in group C samples were caries-free (control group). Unstimulated saliva from all samples was collected and TAC was measured by spectrophotometry using an adaptation of 2, 2'-azino-di-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) assay. The Ca ion level was estimated by an auto- analyzer. Data were analyzed with one- and two-way ANOVA test, at a p difference between groups ( p differences within and between groups ( p Gender is an effective factor in changes induced in oral cavity as females showed more emphatic reaction to dental filling materials than males. Patients who have dental restorations, especially dental composites, should pay more attention to their dental hygiene, because dental restorations can increase oxidative stress and decrease Ca ion level in saliva, which might jeopardize remineralization process of tooth structures after demineralization. Key words: Amalgam, caries, composite, saliva, total antioxidant capacity.

The investigation of Helicobacter pylori in the dental biofilm and saliva samples of children with dyspeptic complaints.

Science.gov (United States)

Aksit Bıcak, Damla; Akyuz, Serap; Kıratlı, Binnur; Usta, Merve; Urganci, Nafiye; Alev, Burcin; Yarat, Aysen; Sahin, Fikrettin

2017-03-21

The oral cavity can be an extra-gastric reservoir for Helicobacter pylori (H.pylori). This can play a role in the pathogenesis of halitosis, glossitis, recurrent aphthous stomatitis, and dental caries. The present study was conducted to detect the presence of H.pylori within the dental biofilm and in saliva samples collected from children suffering from dyspepsia and children without any gastrointestinal complaints. Associations with gastric infection, halitosis, and some oral parameters were also evaluated. Seventy children (aged between 5-16) with dyspepsia were selected for the study group and control group composed of 30 healthy children without dyspepsia were also included in the study. After detailed oral and clinical examinations for oral parameters, saliva, and supragingival dental biofilm samples were collected for 16S rRNA and 23S rRNA genes detection by real-time polymerase chain reaction (RT-PCR). The presence of gastric H.pylori was evaluated in endoscopic biopsy specimens histopathologically. Halitosis was evaluated by benzoyl-DL-arginine-naphthylamid (BANA) test. Salivary S.mutans and Lactobacilli sp. counts were also carried out by commercial kits. H.pylori was histopathologically detected amongst 83% of the children with the dyspeptic condition. The detection rate of this bacteria in dental biofilm and saliva samples and halitosis were found relatively higher in the dyspeptic children rather than the control group (p pylori (p > 0.05). In the gastric H.pylori positive group with dyspepsia, DMFT/S and dmft/s numbers and plaque indices were found higher than the control group (p pylori negative group with dyspepsia were found higher than the control group (p pylori positive and negative groups (p > 0.05). Comparing to those with negative for both genes, in children whose dental biofilm and saliva samples were positive for both 16S rRNA and 23S rRNA genes, significantly higher results for halitosis, and DMFS numbers and significantly

Factors involved in dental surgery fires: a review of the literature.

Science.gov (United States)

VanCleave, Andrea M; Jones, James E; McGlothlin, James D; Saxen, Mark A; Sanders, Brian J; Walker, LaQuia A

2014-01-01

Surgical fires are well-characterized, readily preventable, potentially devastating operating room catastrophes that continue to occur from 20 to 100 times per year or, by one estimate, up to 600 times per year in US operating rooms, sometimes with fatal results. The most significant risk factors for surgical fires involve (a) the use of an ignition source, such as laser or electrocautery equipment, in or around an oxygen-enriched environment in the head, neck, and upper torso area and (b) the concurrent delivery of supplemental oxygen, especially via nasal cannula. Nonetheless, while these 2 conditions occur very commonly in dental surgery, especially in pediatric dental surgery where sedation and anesthesia are regularly indicated, there is a general absence of documented dental surgical fires in the literature. Barring the possibility of underreporting for fear of litigation, this may suggest that there is another mechanism or mechanisms present in dental or pediatric dental surgery that mitigates this worst-case risk of surgical fires. Some possible explanations for this include: greater fire safety awareness by dental practitioners, incidental ventilation of oxygen-enriched environments in patient oral cavities due to breathing, or suction used by dental practitioners during procedures. This review of the literature provides a background to suggest that the practice of using intraoral suction in conjunction with the use of supplemental oxygen during dental procedures may alter the conditions needed for the initiation of intraoral fires. To date, there appear to be no published studies describing the ability of intraoral suctioning devices to alter the ambient oxygen concentration in an intraoral environment. In vivo models that would allow examination of intraoral suction on the ambient oxygen concentration in a simulated intraoral environment may then provide a valuable foundation for evaluating the safety of current clinical dental surgical practices

Does Intellectual Disability Affect the Development of Dental Caries in Patients with Cerebral Palsy?

Science.gov (United States)

Moreira, Rafaela Nogueira; Alcantara, Carlos Eduardo Pinto; Mota-Veloso, Isabella; Marinho, Sandra Aparecida; Ramos-Jorge, Maria L.; Oliveira-Ferreira, Fernanda

2012-01-01

The aim of this study was to evaluate if the severity of intellectual disability is a factor that affects the development of dental cavities in patients with cerebral palsy. This cross-sectional study was conducted on 165 individuals who were selected from a physical rehabilitation center, a special public school and a regular public school. Of…

High field tests of 1.3 GHz niobium superconducting cavities

International Nuclear Information System (INIS)

Kako, Eiji; Noguchi, Shuichi; Ono, Masaaki

1993-01-01

Four single-cell cavities prepared by various surface treatments have been tested repeatedly since 1991. A maximum accelerating gradient of 25.1 MV/m with a high Q 0 value of ∼10 10 was successfully achieved after heat treatment at 1400degC. A temperature mapping system with a high thermal sensitivity under superfluid helium was developed to understand phenomena limiting a maximum accelerating gradient. The cavity performances and the phenomena at high fields are reported in this paper. (author)

On the field dependent surface resistance of niobium on copper cavities

CERN Document Server

Junginger, Tobias

2015-01-01

The surface resistance Rs of superconducting cavities prepared by sputter coating a thin niobium film on a copper substrate increases significantly stronger with the applied RF field compared to cavities of bulk material. A possible cause is that due to the thermal boundary resistance between the copper substrate and the niobium film Rs is enhanced due to global heating of the inner cavity wall. Introducing helium gas in the cavity and measuring its pressure as a function of applied field allowed to conclude that the inner surface of the cavity is heated up by only 60+/-60 mK when Rs increases with Eacc by 100 nOhm. This is more than one order of magnitude less than what one would expect from global heating. Additionally the effect of cooldown speed and low temperature baking have been investigated in the framework of these experiments. It is shown that for current state of the art niobium on copper cavities there is only a detrimental effect of low temperature baking. A fast cooldown results in a lowered Rs.

Preparation and Instructional Competency Needs of the New Dental Hygiene Educator: A Phenomenological Study

Science.gov (United States)

Donovan, Kelly

2017-01-01

This study focused on the instructional competency needs of new dental hygiene educators. The purpose of this qualitative and phenomenological study was twofold: (a) to explore the lived experiences and perceptions of 14 dental hygiene educators who have transitioned from clinical practice into the California Community College education system to…

Identification of infectious microbiota from oral cavity environment of various population group patients as a preventive approach to human health risk factors.

Science.gov (United States)

Zawadzki, Paweł J; Perkowski, Konrad; Starościak, Bohdan; Baltaza, Wanda; Padzik, Marcin; Pionkowski, Krzysztof; Chomicz, Lidia

2016-12-23

This study presents the results of comparative investigations aimed to determine microbiota that can occur in the oral environment in different human populations. The objective of the research was to identify pathogenic oral microbiota, the potential cause of health complications in patients of different population groups. The study included 95 patients requiring dental or surgical treatment; their oral cavity environment microbiota as risk factors of local and general infections were assessed. In clinical assessment, differences occurred in oral cavity conditions between patients with malformations of the masticatory system, kidney allograft recipients and individuals without indications for surgical procedures. The presence of various pathogenic and opportunistic bacterial strains in oral cavities were revealed by direct microscopic and in vitro culture techniques. Colonization of oral cavities of patients requiring surgical treatment by the potentially pathogenic bacteria constitutes the threat of their spread, and development of general infections. Assessment of oral cavity infectious microbiota should be performed as a preventive measure against peri-surgical complications.

Survey of radiologic practices among dental practitioners

International Nuclear Information System (INIS)

Goren, A.D.; Sciubba, J.J.; Friedman, R.; Malamud, H.

1989-01-01

The purpose of this study was to determine the factors that influence and contribute to patient exposure in radiologic procedures performed in the offices of 132 staff members within the dental department of a teaching hospital. A questionnaire was prepared in which data were requested on brands of film used, type of x-ray unit used, processing, and use of leaded apron, cervical shield, and film holder. Offices were also visited to evaluate performance of existing dental x-ray equipment. Both the Dental Radiographic Normalizing and Monitoring Device and the Dental Quality Control Test Tool were evaluated. The average exposure was equivalent to the class D film (220 mR), but only 13% of those surveyed used the faster class E film, which would reduce patient exposure in half. The survey indicates that dentists are not using the newer low-exposure class E film in their practices

Ergonomic risk: social representations of dental students

Directory of Open Access Journals (Sweden)

Luana Kelle Batista Moura

2014-01-01

Full Text Available Objective: To learn the social representations of ergonomic risk prepared ​​by dental students. Methodology: This exploratory study, subsidized the Theory of Social Representations, with 64 dental students of an educational institution, by means of interviews. The data were processed in Alceste4.8 and lexical analysis done by the descending hierarchical classification. Results: In two categories: knowledge about exposure to ergonomic risk end attitude of students on preventing and treating injuries caused by repetitive motion. For students, the ergonomic risk is related to the attitude in the dental office. Conclusion: Prevention of ergonomic risk for dental students has not been incorporated as a set of necessary measures for their health and the patients, to prevent ergonomic hazards that can result in harm to the patient caused by work-related musculoskeletal disorder, which is reflected in a lower quality practice.

The effects of acid erosion and remineralization on enamel and three different dental materials: FT-Raman spectroscopy and scanning electron microscopy analysis.

Science.gov (United States)

Soares, Luís Eduardo Silva; Soares, Ana Lúcia Silva; De Oliveira, Rodrigo; Nahórny, Sidnei

2016-07-01

FT-Raman spectroscopy and scanning electron microscopy (SEM) were employed to test the hypothesis that the beverage consumption or mouthwash utilization would change the chemistry of dental materials and enamel inorganic content. Bovine enamel samples (n = 36) each received two cavity preparations (n = 72), each pair filled with one of three dental materials (R: nanofilled composite resin, GIC: glass-ionomer cement, RMGIC: resin-modified GIC). Furthermore, they were treated with three different solutions (S: artificial saliva, E: erosion/Pepsi Twist or EM: erosion + mouthwash/Colgate Plax). Reduction of carbonate content of enamel was greater in RE than RS (P erosion. Material degradation was greater after E and EM than S. GIC and RMGIC materials had a positive effect against acid erosion in the adjacent enamel after remineralization with mouthwash. The beverage and mouthwash utilization would change R and GIC chemical properties. A professional should periodically monitor the glass-ionomer and resin restorations, as they degrade over time under erosive challenges and mouthwash utilization. Microsc. Res. Tech., 2016. © 2016 Wiley Periodicals, Inc. Microsc. Res. Tech. 79:646-656, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

[Helicobacter pylori in the development of dental caries].

Science.gov (United States)

Moseeva, M V; Belova, E V; Vakhrushev, Ia M

2010-01-01

It is shown, that in patients with erosive and ulcer defects of gastroduodenal zone at settling Helicobacter pylori (Hp) in an oral cavity in 100% of cases caries develops at intensity 13.6 +/- 1.4 teeth. Produced Hp protease and ammonia cause disintegration connected to protein silica acids and reduce activity lysocim, worsening, thus, fluid and protective properties of a saliva. In the subsequent infringement of autopurification of a teeth results in accumulation of a dental strike where protease activity conditionally pathogenic microflora conducts to depolymerization and demineralization enamels of a teeth.

Development of an advanced electropolishing setup for multicell high gradient niobium cavities

Directory of Open Access Journals (Sweden)

F. Éozénou

2012-08-01

Full Text Available Reproducible operation at high performances of superconducting cavities is required for linear accelerators. High beta elliptical cavities are thus of concern and, to achieve required performances for such resonators, surface preparation including electropolishing is recommended. We have designed and operate a setup for electropolishing in the vertical position of multicell cavities in order to: (i obtain high yield with large elliptical cavities for Superconducting Linac (SPL or European Spallation Source projects; (ii develop a reference installation demonstrating that this process is appropriate for the large scale treatment of cavities in industry. The setup described here is the first one able to electropolish vertically multicell cavities with circulating acid and high safety standards. This equipment makes it possible to use a wide range of parameters such as voltage, acid flow rate, temperature, and nitrogen injection with an R&D purpose in mind. Optimization is studied using modeling with COMSOL software for different cavities. As examples, we present some results for the 704 MHz high-beta SPL cavity and the 1300 MHz International Linear Collider cavity and show the influence of cathode shape on both acid flow and electric field distribution during the process. Importance of the size of the cavity and first results achieved on single-cell and nine-cell cavities will be discussed.

Cavity disinfection in minimally invasive dentistry - comparative evaluation of Aloe vera and propolis: A randomized clinical trial

Directory of Open Access Journals (Sweden)

A R Prabhakar

2015-01-01

Full Text Available Context: The survival of atraumatic restorative treatment (ART restorations would probably increase if near total elimination of cariogenic microorganisms could be done in the process of cavity cleaning before going ahead with the restoration. Thus, use of naturally occurring disinfecting agents for achieving this goal could herald a new beginning in the field of contemporary minimum intervention dentistry. Aims: To evaluate the efficacy of hand instruments in excavating dental caries and comparatively evaluate the roles of Aloe vera and propolis as potential cavity disinfecting agents after minimally invasive hand excavation of dental caries. Settings and Designs: Experimental, in vivo intergroup split mouth, randomized clinical trial. Subjects and Methods: The study included Group I (Control, Group II (A. vera and Group III (propolis. Ten patients with three teeth each have occlusal/occlusoproximal lesions suitable for ART were selected. Dentinal samples were collected three times from each tooth viz., preexcavation, postexcavation and postdisinfection of the cavities. These dentinal samples were subjected to microbiological analyses for total viable count. Statistical Analysis Used: Repeated measures of analysis of variance (ANOVA with Bonferroni post-hoc test and one-way ANOVA with Tukey post-hoc test. Results: In all the three groups, significant amount of bacteria were left behind after hand excavation. Group II and Group III, in which cavities were treated with A. vera and propolis extracts respectively, showed a significant reduction in the bacterial counts when compared to control the group. Conclusions: Hand excavation alone does not completely eliminate bacteria, which may predispose treated teeth to secondary caries. Both propolis and A. vera extracts can be used as potential natural disinfecting agents, thereby embracing the concept of phytotherapy in minimum intervention dentistry.

Influence of dental bleaching on marginal leakage of Class V restorations

Directory of Open Access Journals (Sweden)

Andréia Cristina Ramos Dorini

2010-04-01

Full Text Available Objective: Evaluate the in vitro effect of bleaching performed in the dental office and waiting time on the degree of microleakage in class V cavities with margins in enamel, restored with resin composite. Methods: Forty-five human third molars were used, in which the vestibular faces were bleached with 35% hydrogen peroxide activated with LED and the palatine faces were not bleached (control. The teeth were randomly divided into 3 groups with 15 teeth in each: Group 1, restored immediately after bleaching; Group 2, seven days after bleaching; and Group 3, fourteen days after bleaching. After cavity preparation, 35% phosphoric acid, Adper Single Bond 2 adhesive (3M ESPE, St. Paul, Mn, USA, and resin composite Filtek Z250 (3M ESPE, St. Paul, MN, USA were applied. The teeth were thermal cycled and sealed with red nail polish on the bleached faces and blue on the non bleached faces, except for 1mm around the restored region. The samples were classified according to the following scores: 0 = no leakage, 1 = minimum leakage (less than 1 / 3 the length of the wall, 2 = moderate leakage (1/3 to 2/3 of the wall and 3 = extensive leakage (over 2/3 of the wall. The data were submitted to the Kruskal-Wallis test at a level of significance of 5%. Results: The restorative procedure immediately after bleaching resulted in statistically higher microleakage values (p 0.05. Conclusion: Based on the results, it is advisable to wait at least 7 days after bleaching to make the definitive restoration.

Oral Streptococcal Endocarditis, Oral Hygiene Habits, and Recent Dental Procedures: A Case-Control Study.

Science.gov (United States)

Duval, Xavier; Millot, Sarah; Chirouze, Catherine; Selton-Suty, Christine; Moby, Vanessa; Tattevin, Pierre; Strady, Christophe; Euvrard, Edouard; Agrinier, Nelly; Thomas, Daniel; Hoen, Bruno; Alla, François

2017-06-15

We aimed to compare oral hygiene habits, orodental status, and dental procedures in patients with infective endocarditis (IE) according to whether the IE-causing microorganism originated in the oral cavity. We conducted an assessor-blinded case-control study in 6 French tertiary-care hospitals. Oral hygiene habits were recorded using a self-administered questionnaire. Orodental status was analyzed by trained dental practitioners blinded to the microorganism, using standardized clinical examination and dental panoramic tomography. History of dental procedures was obtained through patient and dentist interviews. Microorganisms were categorized as oral streptococci or nonoral pathogens using an expert-validated list kept confidential during the course of the study. Cases and controls had definite IE caused either by oral streptococci or nonoral pathogens, respectively. Participants were enrolled between May 2008 and January 2013. Cases (n = 73) were more likely than controls (n = 192) to be aged calculus, and infectious dental diseases did not significantly differ between groups. Patients with IE caused by oral streptococci differ from patients with IE caused by nonoral pathogens regarding background characteristics, oral hygiene habits, and recent dental procedures, but not current orodental status. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com

General evaluation of hard dental tissue and risk factors of dental caries in young people

Directory of Open Access Journals (Sweden)

Антоніна Михайлівна Політун

2016-04-01

Full Text Available The prognostication of caries in youth is important for determination and prescription of individual prophylactic arrangements and its further influence on mineralization of the hard dental tissues.Aim of the work: the study of the prevalence and intensity of caries among the young people and determination of possible connection with the risk factor of caries development for further choice of the reasonable prophylactic arrangement.Materials and methods of research: epidemiological, clinical, statistic ones.Results of research: The article describes results of the comprehensive dental examination of 135 persons18-25 years old. There was determined the high prevalence of caries (96,3±0,74 % with considerable intensity (8,87±0,39. The main etiological factors among youth are: poor nutrition with prevalence of carbohydrate (74,81±0,56 %, lack of oral hygiene (59,27±0,73 %, quantitative and qualitative composition of oral fluid, presence of somatic diseases (40±0,30 %, bad habits (31,85±0,24 %, neglect of the sport (48,88±0,36 %, chronic emotional stress (38,51±0,29 %, due to the increased workload and related stress factors.Conclusions: the high prevalence (96,3±0,74 % and intensity of carious process (8,87±0,39 is caused by the unsatisfactory state of oral cavity, (1,91±0,06, under the influence of general factors (somatic diseases, stress, poor nutrition the reactivity of protective mechanisms is lowered and the risk of dental morbidity of youth increases. So, it proves the necessity of elaboration and introduction of the active arrangements of primary prophylaxis directed on the raise of caries resistance of the hard dental tissues in young people

Buffer Chemical Polishing and RF Testing of the 56 MHz SRF Cavity

Energy Technology Data Exchange (ETDEWEB)

Burrill,A.

2009-01-01

The 56 MHz cavity presents a unique challenge in preparing it for RF testing prior to construction of the cryomodule. This challenge arises due to the physical dimensions and subsequent weight of the cavity, and is further complicated by the coaxial geometry, and the need to properly chemically etch and high pressure rinse the entire inner surface prior to RF testing. To the best of my knowledge, this is the largest all niobium SRF cavity to be chemically etched and subsequently tested in a vertical dewar at 4K, and these processes will be the topic of this technical note.

Cavity Cooling of Nanoparticles: Towards Matter-Wave experiments

Science.gov (United States)

Millen, James; Kuhn, Stefan; Arndt, Markus

2016-05-01

Levitated systems are a fascinating addition to the world of optically-controlled mechanical resonators. It is predicted that nanoparticles can be cooled to their c.o.m. ground state via the interaction with an optical cavity. By freeing the oscillator from clamping forces dissipation and decoherence is greatly reduced, leading to the potential to produce long-lived, macroscopically spread, mechanical quantum states, allowing tests of collapse models and any mass limit of quantum physics. Reaching the low pressures required to cavity-cool to the ground state has proved challenging. Our approach is to cavity cool a beam of nanoparticles in high vacuum. We can cool the c.o.m. motion of nanospheres a few hundred nanometers in size. Looking forward, we will utilize novel microcavities to enhance optomechanical cooling, preparing particles in a coherent beam ideally suited to ultra-high mass interferometry at 107 a.m.u.

Quantum iSWAP gate in optical cavities with a cyclic three-level system

Science.gov (United States)

Yan, Guo-an; Qiao, Hao-xue; Lu, Hua

2018-04-01

In this paper we present a scheme to directly implement the iSWAP gate by passing a cyclic three-level system across a two-mode cavity quantum electrodynamics. In the scheme, a three-level Δ -type atom ensemble prepared in its ground state mediates the interaction between the two-cavity modes. For this theoretical model, we also analyze its performance under practical noise, including spontaneous emission and the decay of the cavity modes. It is shown that our scheme may have a high fidelity under the practical noise.

Microleakage of three self-etch bonding agents in class 5 composite cavities

Directory of Open Access Journals (Sweden)

Saeed Nemati Anaraki

2016-07-01

Full Text Available Background and Aims: Microleakage is one of the most common problems in bonding systems, which cause different clinical shortcomings such as post operative sensitivity, marginal discoloration and pulp necrosis that can decrease those using bonding systems. The aim of this study was to compare the microleakage of three self etch bonding agents (generation 6 and 7 in class 5 composite cavities. Materials and Methods: In this experimental study, 30 facial class 5 cavities were prepared in 30 human premolar teeth which were freshly extracted for orthodontic purposes. Cl V cavities were prepared in 2*3*2 mm dimensions. Occlusal margins were in enamel and gingival ones in cementum and randomly divided into 3 groups of 10 each. Then the cavities were treated by clearhil SE Bond (Kuraray, Japan, G Bond (GC, Japan, and Opti Bond Solo Plus (Kerr, USA, according to the manufacturers’ insductions. Then the cavities were filled using Z100 resin composite. The specimens were then immersed in a 50% AgNo solution for 24 hrs. Then, the teeth were cut buccolingually to be evaluated for dye penetration with stereomicroscope. Data were analyzed using Kruskal-Wallis test. Results: This study revealed that Opti bond solo plus had type1 microleakage (dye penetration up to 1/3 of cavity in 80% of specimen, and type 4 microleakage (along axial wall in 10%. Clearfil SE bond had no leakage in 50%, type1 in 40% and type 2 (up to 2/3 of cavity in 10%. But there was no significant difference in the microleakage at the gingival margins between 3 groups (P>0.05. Conclusion: Clearfil SE Bond and G bond could prevent microleakage more effectively than that of Opti Bond Solo Plus on the occlusal margins. However, no difference in the microleakage on the gingival surfaces was found.

Strategies of Coping With Stress During Root Canal Therapy

Directory of Open Access Journals (Sweden)

Zare Jahromi

2015-12-01

Full Text Available Background Endodontic treatment is one of the stress producing situations. Objectives The purpose of this article was to determine the most stressful stage of root canal therapy among endodontists, endodontic residents, and undergraduate dental students and offering some strategies for reducing stress during this treatment. Patients and Methods This descriptive survey comprised three groups. Thirty-six endodontists, 41 endodontic residents, and 47 undergraduate dental students selected by convenience sampling. Participants were asked about age, sex, the most stressful stage of root canal therapy and stress reducing strategies during the procedure. Results The most stressful stage of root canal therapy was endodontic treatment for children in male endodontists and residents, preparing access cavity on crowns in female endodontists, obturation of apically root Resorped canals in female residents, obturation in female students, and preparing access cavity on molar teeth in male students. The most suggested strategy for reducing stress during root canal therapy was related to experience, knowledge, enough study, and technical mastery. Conclusions It is required to consider the strategies during student education in dental schools for both under and post-graduation dental students and better to follow them in workshops for other dentists and even endodontists.

Mandating Education of Dental Graduates to Provide Care to Individuals with Intellectual and Developmental Disabilities

Science.gov (United States)

Waldman, H. Barry; Perlman, Steven P.

2006-01-01

In 2004, The Commission on Dental Accreditation adopted new standards for dental and dental hygiene education programs to ensure the preparation of practitioners to provide oral health services for persons with special health care needs. The course of action leading to the adoption of the new standards, together with the continuing obstacles of…

Dental expression and role in palliative treatment

Directory of Open Access Journals (Sweden)

Rajiv Saini

2009-01-01

Full Text Available World Health Organization defines palliative care as the active total care of patients whose disease is not responding to curative treatment. Palliative care for the terminally ill is based on a multidimensional approach to provide whole-person comfort care while maintaining optimal function; dental care plays an important role in this multidisciplinary approach. The aim of the present study is to review significance of dentist′s role to determine whether mouth care was effectively assessed and implemented in the palliative care setting. The oral problems experienced by the hospice head and neck patient clearly affect the quality of his or her remaining life. Dentist plays an essential role in palliative care by the maintenance of oral hygiene; dental examination may identify and cure opportunistic infections and dental disease like caries, periodontal disease, oral mucosal problems or prosthetic requirement. Oral care may reduce not only the microbial load of the mouth but the risk for pain and oral infection as well. This multidisciplinary approach to palliative care, including a dentist, may reduce the oral debilities that influence the patient′s ability to speak, eat or swallow. This review highlighted that without effective assessment of the mouth, the appropriate implementation of care will not be delivered. Palliative dental care has been fundamental in management of patients with active, progressive, far-advanced disease in which the oral cavity has been compromised either by the disease directly or by its treatment; the focus of care is quality of life.

Comprehensive rehabilitation using dental implants in generalized aggressive periodontitis

Directory of Open Access Journals (Sweden)

Asha Ramesh

2017-01-01

Full Text Available Generalized aggressive periodontitis (GAP is a debilitating form of the disease and it results in deteriorating effects on the esthetic and functional aspects of the oral cavity. This case report describes the comprehensive rehabilitation of GAP patient using dental implants. The treatment planning involved thorough scaling and root planning (SRP with oral hygiene instructions. The patient was motivated to adhere to a strict oral hygiene regimen following which periodontal flap surgery employing guided tissue regeneration and bone grafts was performed. Bacterial culture for anaerobic microorganisms was done using a gas pack pre- and postperiodontal treatment to confirm the effectiveness of the periodontal treatment regimen and also to proceed with dental implant placement. The rigorous maintenance program ensured the stability of the periodontium following which immediate placement of dental implants in the maxillary and mandibular anterior region was done. The fixed metal-ceramic prosthesis was fabricated in a step-by-step process and the patient was recalled on a periodic basis over a 3-year follow-up duration. This case is a testimonial to the postperiodontal treatment long-term stability with excellent patient cooperation and strict maintenance protocol.

Diagnostic accuracy of insight intraoral film on dental caries

Energy Technology Data Exchange (ETDEWEB)

Yoon, Young Nam; Lee, Byung Do [Wonkwang University College of Medicine, Iksan (Korea, Republic of); Lee, Sang Rae [Kyunghee University College of Medicine, Seoul (Korea, Republic of)

2004-03-15

To compare the diagnostic accuracy of Kodak Insight film with other intra-oral films in the detection of dental caries. Periapical radiographs of 99 extracted human teeth with sound proximal surfaces and interproximal artificial cavities were made on Kodak Ultra speed, Ektaspeed, Agfa Ektaspeed and Kodak Insight films and automatically processed. Six dentists examined the presence of dental caries using a five-point confidence rating scale and compared the diagnostic accuracy by ROC (Receiver Operating Characteristic) analysis and ANOVA test. The sensitivity of Kodak Ultra speed, Ektaspeed, Agfa Ektaspeed and Insight film were 0.84, 0.77, 0.75 and 0.79 respectively. The specificity of Kodak Ultra speed, Ektaspeed, Agfa Ektaspeed and Insight film were 0.97, 0.95, 0.96 and 0.94 respectively. The mean ROC areas (Az) of Kodak Ultra speed, Ektaspeed, Agfa Ektaspeed and Insight film were 0.917, 0.910, 0.894, 0.909 respectively. There was no significant differences between Az of Insight film and other films (p = 0.178). Theses results suggested that Kodak Insight film have the comparative diagnostic accuracy of dental caries with Ultraspeed and Ektaspeed films. (77)

Diagnostic accuracy of insight intraoral film on dental caries

International Nuclear Information System (INIS)

Yoon, Young Nam; Lee, Byung Do; Lee, Sang Rae

2004-01-01

To compare the diagnostic accuracy of Kodak Insight film with other intra-oral films in the detection of dental caries. Periapical radiographs of 99 extracted human teeth with sound proximal surfaces and interproximal artificial cavities were made on Kodak Ultra speed, Ektaspeed, Agfa Ektaspeed and Kodak Insight films and automatically processed. Six dentists examined the presence of dental caries using a five-point confidence rating scale and compared the diagnostic accuracy by ROC (Receiver Operating Characteristic) analysis and ANOVA test. The sensitivity of Kodak Ultra speed, Ektaspeed, Agfa Ektaspeed and Insight film were 0.84, 0.77, 0.75 and 0.79 respectively. The specificity of Kodak Ultra speed, Ektaspeed, Agfa Ektaspeed and Insight film were 0.97, 0.95, 0.96 and 0.94 respectively. The mean ROC areas (Az) of Kodak Ultra speed, Ektaspeed, Agfa Ektaspeed and Insight film were 0.917, 0.910, 0.894, 0.909 respectively. There was no significant differences between Az of Insight film and other films (p = 0.178). Theses results suggested that Kodak Insight film have the comparative diagnostic accuracy of dental caries with Ultraspeed and Ektaspeed films. (77)

IMPACT OF FLUORIDE ON DENTAL HEALTH QUALITY.

Science.gov (United States)

Medjedovic, Eida; Medjedovic, Senad; Deljo, Dervis; Sukalo, Aziz

2015-12-01

Fluoride is natural element that strengthens teeth and prevents their decay. Experts believe that the best way to prevent cavities is the use of fluoride from multiple sources. Studies even show that in some cases, fluoride can stop already started damage of the teeth. In children younger than 6 years fluoride is incorporated into the enamel of permanent teeth, making the teeth more resistant to the action of bacterial and acids in food. The aim of this study is to determine the effects of improving the health status of teeth after six months treatment with the use of topical fluoridation 0.5% NaF, and the level and quality of the impact of treatment with chemical 0.5% NaF on the dental health of children at age from 8 to 15 years, in relation to gender and chronological age. This study included school children aged 8 to 15 years who visited health and dental services dependent in Mostar. It is obvious that after the implementation of treatment with 5% NaF by the method of topical fluoridation, health status of subjects from the experimental group significantly improved, so that at the final review 89.71% or 61 subjects of the experimental group had healthy (cured teeth), tooth with dental caries only 5.88% or 4 respondents tooth with dental caries and filling 4.41% or 3 respondents, extracted baby tooth 14.71% or 10 respondents, while for 13.24% of respondents was identified state with still unerupted teeth. Our findings are indirectly confirmed that the six-month treatment of fluoridation with 5% NaF, contributed to statistically significant improvement in overall oral health of the experimental group compared to the control group which was not treated by any dental treatment. It can be concluded that there is a statistically significant difference in the evaluated parameters of oral health of children in the control group compared to the studied parameters of oral health the experimental group of children at the final dental examination.

Practice Location Characteristics of Non-Traditional Dental Practices.

Science.gov (United States)

Solomon, Eric S; Jones, Daniel L

2016-04-01

Current and future dental school graduates are increasingly likely to choose a non-traditional dental practice-a group practice managed by a dental service organization or a corporate practice with employed dentists-for their initial practice experience. In addition, the growth of non-traditional practices, which are located primarily in major urban areas, could accelerate the movement of dentists to those areas and contribute to geographic disparities in the distribution of dental services. To help the profession understand the implications of these developments, the aim of this study was to compare the location characteristics of non-traditional practices and traditional dental practices. After identifying non-traditional practices across the United States, the authors located those practices and traditional dental practices geographically by zip code. Non-traditional dental practices were found to represent about 3.1% of all dental practices, but they had a greater impact on the marketplace with almost twice the average number of staff and annual revenue. Virtually all non-traditional dental practices were located in zip codes that also had a traditional dental practice. Zip codes with non-traditional practices had significant differences from zip codes with only a traditional dental practice: the populations in areas with non-traditional practices had higher income levels and higher education and were slightly younger and proportionally more Hispanic; those practices also had a much higher likelihood of being located in a major metropolitan area. Dental educators and leaders need to understand the impact of these trends in the practice environment in order to both prepare graduates for practice and make decisions about planning for the workforce of the future.

Dental Calculus Arrest of Dental Caries

OpenAIRE

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human t...

PREVALENCE AND ASSOCIATED FACTORS OF DENTAL CARIES, GINGIVITIS, AND CALCULUS DEPOSITS IN SCHOOL CHILDREN OF SARGODHA DISTRICT, PAKISTAN.

Science.gov (United States)

Umer, Muhammad Farooq; Farooq, Umer; Shabbir, Arham; Zofeen, Shumaila; Mujtaba, Hasan; Tahir, Muhammad

2016-01-01

According to a pathfinder survey conducted by World Health Organization, dental caries is the single most common chronic childhood disease in Pakistan. The update information regarding dental health of school children of Sargodha district is required to plan community caries prevention programs and for better understanding of existing situation, and may improve longevity, treatment, and care. This cross sectional study was conducted in four randomly selected schools of Sargodha district, stratified by gender selected. Two well-trained dentists examined the oral cavities of children for dental caries, gingivitis, and calculus deposits. The sample consisted of children aged between 3-12 years. The overall prevalence rate of gingivitis, calculus, and dental caries was found as 14.5%, 14.3%, and 45.9% respectively. A significant association was found between DMFT score (p calculus (p calculus (p dental caries than children residing in rural areas. Incidence of gingivitis (p calculus, and dental caries in primary (p dental caries in primary teeth was found higher (p < 0.01) in children who brushed occasionally. Study also showed that none of the children ever visited dentist for treatment. The results emphasize the need for initiation of awareness programs to achieve 0 DMFT/df scores.

A study on setting of the fatigue limit of temporary dental implants.

Science.gov (United States)

Kim, M H; Cho, E J; Lee, J W; Kim, E K; Yoo, S H; Park, C W

2017-07-01

A temporary dental implant is a medical device which is temporarily used to support a prosthesis such as an artificial tooth used for restoring patient's masticatory function during implant treatment. It is implanted in the oral cavity to substitute for the role of tooth. Due to the aging and westernization of current Korean society, the number of tooth extraction and implantation procedures is increasing, leading to an increase in the use and development of temporary dental implants. Because an implant performs a masticatory function in place of a tooth, a dynamic load is repeatedly put on the implant. Thus, the fatigue of implants is reported to be the most common causes of the fracture thereof. According to the investigation and analysis of the current domestic and international standards, the standard for fatigue of implant fixtures is not separately specified. Although a test method for measuring the fatigue is suggested in an ISO standard, it is a standard for permanent dental implants. Most of the test standards for Korean manufacturers and importers apply 250 N or more based on the guidance for the safety and performance evaluation of dental implants. Therefore, this study is intended to figure out the fatigue standard which can be applied to temporary dental implants when measuring the fatigue according to the test method suggested in the permanent dental implant standard. The results determined that suitable fatigue standards of temporary dental implants should be provided by each manufacturer rather than applying 250 N. This study will be useful for the establishment of the fatigue standards and fatigue test methods of the manufacturers and importers of temporary dental implants.

Mandibular and Dental Manifestations of Gaucher Disease

Science.gov (United States)

Saranjam, Hamid R.; Sidransky, Ellen; Levine, William Z.; Zimran, Ari; Elstein, Deborah

2012-01-01

Gaucher disease is a systemic lysosomal storage disorder with a high prevalence among Ashkenazi Jews. It is caused by an inherited deficiency of the lysosomal enzyme glucocerebrosidase. Common signs and symptoms include hepatosplenomegaly, anemia, thrombocytopenia, and skeletal involvement. Oral and dental manifestations are less commonly seen. These manifestations are often asymptomatic, although they may be detected by routine dental x-rays. There are several case reports and a few larger series published describing patients with Gaucher disease who have mandibulo-maxillofacial involvement. This review aims to examine the oral manifestations observed in Gaucher disease and to suggest practical guidelines for dealing with these often worrisome signs. Among the critical issues are the benign nature of Gaucher cell infiltration of the mandible and the critical importance of being prepared for post-procedure bleeding and/or infections. Therefore, it is essential that dental practitioners be aware of the possible oral and dental complications of Gaucher disease, as well as the available treatment modalities. PMID:22251146

Fate of the Molar Dental Lamina in the Monophyodont Mouse

Science.gov (United States)

Dosedělová, Hana; Dumková, Jana; Lesot, Hervé; Glocová, Kristýna; Kunová, Michaela; Tucker, Abigail S.; Veselá, Iva; Krejčí, Pavel; Tichý, František; Hampl, Aleš; Buchtová, Marcela

2015-01-01

The successional dental lamina (SDL) plays an essential role in the development of replacement teeth in diphyodont and polyphyodont animals. A morphologically similar structure, the rudimental successional dental lamina (RSDL), has been described in monophyodont (only one tooth generation) lizards on the lingual side of the developing functional tooth. This rudimentary lamina regresses, which has been proposed to play a role in preventing the formation of future generations of teeth. A similar rudimentary lingual structure has been reported associated with the first molar in the monophyodont mouse, and we show that this structure is common to all murine molars. Intriguingly, a lingual lamina is also observed on the non-replacing molars of other diphyodont mammals (pig and hedgehog), initially appearing very similar to the successional dental lamina on the replacing teeth. We have analyzed the morphological as well as ultrastructural changes that occur during the development and loss of this molar lamina in the mouse, from its initiation at late embryonic stages to its disappearance at postnatal stages. We show that loss appears to be driven by a reduction in cell proliferation, down-regulation of the progenitor marker Sox2, with only a small number of cells undergoing programmed cell death. The lingual lamina was associated with the dental stalk, a short epithelial connection between the tooth germ and the oral epithelium. The dental stalk remained in contact with the oral epithelium throughout tooth development up to eruption when connective tissue and numerous capillaries progressively invaded the dental stalk. The buccal side of the dental stalk underwent keratinisation and became part of the gingival epithelium, while most of the lingual cells underwent programmed cell death and the tissue directly above the erupting tooth was shed into the oral cavity. PMID:26010446

The application of lesion sterilization and tissue repair 3Mix-MP for treating rat's dental pulp tissue

Directory of Open Access Journals (Sweden)

Raditya Nugroho

2015-03-01

Full Text Available Background: Lesion sterilization and tissue repair (LSTR 3Mix-MP are three broad-spectrum antibiotics, including metronidazole, ciprofloxacin and minocycline are mixed with propylene glycol or macrogol. There is the possibility ofthe healing process that marked proliferation ofnew blood vessels and proliferation offibroblasts in the treatment ofirreversible pulpitis by pulp capping LSTR 3MixMP because of  the principle of the method LSTR 3Mix-MP is to kill bacteria. Purpose: The purpose of this study to prove the effect of LSTR 3Mix-MP on chronic inflammation and the healing process in rat dental pulp tissue in vivo. Methods: Rattus norvegicus anaesthetized by using ketamine and xylazine dissolved in sterile isotonic saline solution (0.2 ml/50gr mm on the upper right thigh. Cavity preparation class I to perforation by using a low speed tapered diamond round bur. In the treatment group, rats were treated 3Mix-MP at a dose of10 mg and then covered with glass ionomer cement for 7 days on the pulp that has been opened for 3 days. The control group treated with saline irrigation on the pulp that has been opened for 3 days. Rats were killed after seven days, and then made preparations pulp tissue to count the number oflymphocytes, macrophages, plasma cells, blood vessels, and fibroblasts Results: There is an increase in the average number ofmacrophage cells, plasma, and fibroblasts; and decreased lymphocytes and blood vessels in the treated group exposure LSTR 3Mix-MP. Conclusion:LSTR 3Mix-MP can reduce chronic inflammation process and enhance the healing process in rat dental pulp tissue.

Comparison of dental health of patients with head and neck cancer receiving IMRT vs conventional radiation.

Science.gov (United States)

Duarte, Victor M; Liu, Yuan F; Rafizadeh, Sassan; Tajima, Tracey; Nabili, Vishad; Wang, Marilene B

2014-01-01

To analyze the dental health of patients with head and neck cancer who received comprehensive dental care after intensity-modulated radiation therapy (IMRT) compared with radiation therapy (RT). Historical cohort study. Veteran Affairs (VA) hospital. In total, 158 patients at a single VA hospital who were treated with RT or IMRT between 2003 and 2011 were identified. A complete dental evaluation was performed prior to radiation treatment, including periodontal probing, tooth profile, cavity check, and mobility. The dental treatment plan was formulated to eliminate current and potential dental disease. The rates of dental extractions, infections, caries, mucositis, xerostomia, and osteoradionecrosis (ORN) were analyzed, and a comparison was made between patients treated with IMRT and those treated with RT. Of the 158 patients, 99 were treated with RT and 59 were treated with IMRT. Compared with those treated with IMRT, significantly more patients treated with RT exhibited xerostomia (46.5% vs 16.9%; P radiation treatment (32.2% vs 11.1%; P = .002; OR, 3.8; 95% CI, 1.65-8.73). Patients who were treated with IMRT had fewer instances of dental disease, more salivary flow, and fewer requisite posttreatment extractions compared with those treated with RT. The number of posttreatment extractions has been reduced with the advent of IMRT and more so with a complete dental evaluation prior to treatment.

The Dental Educator and the Law.

Science.gov (United States)

Mattingly, Stephen L.; Gehring, Donald D.

1980-01-01

Dental educators, it is suggested, become vulnerable to student lawsuits if they ignore legislative changes and judicial decisions that affect all academic units in higher education. Issues involving contractual considerations, privacy and grading, and recent copyright revisions are reviewed. Knowledge of these issues will better prepare the…

Difference in initial dental biofilm accumulation between night and day

DEFF Research Database (Denmark)

Dige, Irene; Schlafer, Sebastian; Nyvad, Bente

2012-01-01

formed during day and night. We hypothesised that there is a diurnal variation in the rate of accumulation of bacteria on solid surfaces in the oral cavity. Material and methods. In situ biofilm from healthy individuals was collected for 12 h during day and night, respectively, subjected to fluorescent......Objective. The study of initial microbial colonization on dental surfaces is a field of intensive research because of the aetiological role of biofilms in oral diseases. Most previous studies of de novo accumulation and composition of dental biofilms in vivo do not differentiate between biofilms...... in situ hybridization, and visualized using confocal laser scanning microscopy. Results. Analysis of the biofilms using stereological methods and digital image analysis revealed a consistent statistically significant difference between both the total number of bacteria and the biovolume in the two 12-h...

Improvement of cavity performance in the Saclay/Cornell/DESY's SC cavities

International Nuclear Information System (INIS)

Kako, E.; Noguchi, S.; Ono, M.

2000-01-01

Development of 1.3 GHz Nb superconducting cavities for TESLA (TeV Energy Superconducting Linear Collider) has been carried out with international collaboration. Three Saclay single-cell cavities, one Cornell two-cell cavity and one DESY nine-cell cavity were sent to KEK in order to compare the cavity performance. These cavities were tested at KEK after the following surface treatment: 1) high pressure rinsing, HPR, 2) chemical polishing and HPR, 3) electropolishing and HPR. The test results, especially, improvement of the cavity performance due to electropolishing are reported in this paper. (author)

Educational intervention about oral piercing knowledge among dental students and adolescents at schools.

Science.gov (United States)

Junco, Pilar; Barrios, Rocío; Ruiz, María José; Bravo, Manuel

2017-10-01

Oral piercing can lead to complications and dentists are in a unique position to detect such complications. The purpose of this study was: (i) to assess the immediate and the long-term effects, on dental students, of a training programme about oral piercing knowledge; and (ii) to assess the immediate effect, on adolescents, of a single educational intervention session about oral piercing. A training programme for dental students (n = 66) was carried out in three phases. The last phase consisted of preparing and giving talks about oral piercing at schools, which was delivered by a random selection of dental students involved in the training programme. Dental students answered a questionnaire about oral piercing knowledge, before, immediately after (only the dental students included in the last phase) and 12 months after the training programme. Adolescents (n = 347) answered a survey about oral piercing knowledge before and after the talks. There were statistically significant differences in all comparison groups, except for the results in the 'before intervention' and in the '12 months after intervention' groups among dental students who had not prepared and given the talks to adolescents. Knowledge about oral piercing significantly improved among adolescents when comparing results before (mean questionnaire score = 3.0) and after (mean questionnaire score = 6.2) the talks. Oral piercing educational intervention had a favourable impact on adolescents and dental students, particularly among those who were more involved in the learning process. © 2017 FDI World Dental Federation.

Low-dose dental CT

International Nuclear Information System (INIS)

Rustemeyer, P.; Eich, H.T.; John-Mikolajewski, V.; Mueller, R.D.

1999-01-01

Purpose: The intention of this study was to reduce patient dose during dental CT in the planning for osseointegrated implants. Methods and Materials: Dental CTs were performed with a spiral CT (Somatom Plus 4, Siemens) and a dental software package. Use of the usual dental CT technique (120 kVp; 165 mA, 1 s rotation time, 165 mAs; pitch factor 1) was compared with a new protocol (120 kVp; 50 mA; 0.7 s rotation time; 35 mAs; pitch factor 2) which delivered the best image quality at the lowest possible radiation dose, as tested in a preceding study. Image quality was analysed using a human anatomic head preparation. Four radiologists analysed the images independently. A Wilcoxon rank pair-test was used for statistic evaluation. The doses to the thyroid gland, the active bone marrow, the salivary glands, and the eye lens were determined in a tissue-equivalent phantom (Alderson-Rando Phantom) with lithium fluoride thermoluminescent dosimeters at the appropriate locations. Results: By mAs reduction from 165 to 35 and using a pitch factor of 2, the radiation dose could be reduced by a factor of nine (max.) (e.g., the bone marrow dose could be reduced from 23.6 mSv to 2.9 mSv, eye lens from 0.5 mSv to 0.3 mSv, thyroid gland from 2.5 mSv to 0.5 mSv, parotid glands from 2.3 mSv to 0.4 mSv). The dose reduction did not lead to an actual loss of image quality or diagnostic information. Conclusion: A considerable dose reduction without loss of diagnostic information is achievable in dental CT. Dosereducing examination protocols like the one presented may further expand the use of preoperative dental CT. (orig.) [de

Surface degradation of nanocrystalline zirconia dental implants

NARCIS (Netherlands)

Ocelík, Václav; Schepke, Ulf; Rasoul, Hamid Haji; Cune, Marco S.; De Hosson, Jeff Th M.

2017-01-01

Yttria-stabilized zirconia prepared by hot isostatic pressing represents attractive material for biomedical applications. In this work the degradation of yttria-stabilized zirconia dental implants abutments due to the tetragonal to monoclinic phase transformation after one year of clinical use was

Polymerization stresses in low-shrinkage dental resin composites measured by crack analysis.

Science.gov (United States)

Yamamoto, Takatsugu; Kubota, Yu; Momoi, Yasuko; Ferracane, Jack L

2012-09-01

The objective of this study was to compare several dental restoratives currently advertised as low-shrinkage composites (Clearfil Majesty Posterior, Kalore, Reflexions XLS Dentin and Venus Diamond) with a microfill composite (Heliomolar) in terms of polymerization stress, polymerization shrinkage and elastic modulus. Cracks were made at several distances from the edge of a precision cavity in a soda-lime glass disk. The composites were placed into the cavity and lengths of the cracks were measured before and after light curing. Polymerization stresses generated in the glass at 2 and 10 min after the irradiation were calculated from the crack lengths and K(c) of the glass. Polymerization shrinkage and elastic modulus of the composites also were measured at 2 and 10 min after irradiation using a video-imaging device and a nanoindenter, respectively. The data were statistically analyzed by ANOVAs and Tukey's test (pelastic moduli of Clearfil Majesty Posterior and Reflexions XLS Dentin were greatest at 2 and 10 min, respectively. Among the four low-shrinkage composites, two demonstrated significantly reduced polymerization stress compared to Heliomolar, which has previously been shown in in vitro tests to generate low curing stress. Copyright © 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Self-induced vomiting and dental erosion--a clinical study.

Science.gov (United States)

Uhlen, Marte-Mari; Tveit, Anne Bjørg; Stenhagen, Kjersti Refsholt; Mulic, Aida

2014-07-29

In individuals suffering from eating disorders (ED) characterized by vomiting (e.g. bulimia nervosa), the gastric juice regularly reaches the oral cavity, causing a possible risk of dental erosion. This study aimed to assess the occurrence, distribution and severity of dental erosions in a group of Norwegian patients experiencing self-induced vomiting (SIV). The individuals included in the study were all undergoing treatment at clinics for eating disorders and were referred to a university dental clinic for examinations. One calibrated clinician registered erosions using the Visual Erosion Dental Examination (VEDE) system. Of 72 referred patients, 66 (63 females and three males, mean age 27.7 years) were or had been experiencing SIV (mean duration 10.6 years; range: 3 - 32 years), and were therefore included in the study. Dental erosions were found in 46 individuals (69.7%), 19 had enamel lesions only, while 27 had both enamel and dentine lesions. Ten or more teeth were affected in 26.1% of those with erosions, and 9% had ≥10 teeth with dentine lesions. Of the erosions, 41.6% were found on palatal/lingual surfaces, 36.6% on occlusal surfaces and 21.8% on buccal surfaces. Dentine lesions were most often found on lower first molars, while upper central incisors showed enamel lesions most frequently. The majority of the erosive lesions (48.6%) were found in those with the longest illness period, and 71.7% of the lesions extending into dentine were also found in this group. However, despite suffering from SIV for up to 32 years, 30.3% of the individuals showed no lesions. Dental erosion commonly affects individuals with ED experiencing SIV, and is more often found on the palatal/lingual surfaces than on the buccal in these individuals, confirming a common clinical assumption.

Intraoral dental radiography: experimental study and clinical use in two horses and a llama

International Nuclear Information System (INIS)

O'Brien, R.T.

1996-01-01

A technique for intraoral radiography of the maxillary cheek teeth in large animals using strips of nonscreen and commercial dental x-ray film is described. The method was initially tested using horse cadaver heads and subsequently on three large animal patients with signs of dental disease. Limitations of the described technique include necessity for general anesthesia, special x-ray film and manual developing. Additionally, the need for very accurate adjustment of incident beam angle, beam centering point and depth in the oral cavity provide a major technical challenge. After becoming famillar with the technique, the major limitation was increased time for manual film developing. The images provided by nonscreen technique were subjectively superior. The anatomic detail of the apical and periodontal regions of the teeth was better than on survey radiographs. Nonscreen intraoral technique should be considered for anesthetized large animal patients with signs of dental disease

Deep drawing experiences of niobium disk for PEFP SRF cavity prototype

International Nuclear Information System (INIS)

Kim, Han Sung; An, Sun; Zhang, Liping; Tang, Yazhe; Li, Ying Min; Kwon, Hyeok Jung; Cho, Yong Sub

2009-01-01

A superconducting radio frequency (SRF) cavity with a geometrical beta of 0.42 has been designed to accelerate a proton beam after 100 MeV for an extension of Proton Engineering Frontier Project (PEFP). The designed cavity shape is an elliptical and the resonant frequency is 700 MHz. In order to confirm the RF and mechanical properties of the cavity, two prototypes of copper cavities have been fabricated and tested. Based on the experiences gained with the copper prototypes, two niobium prototypes have been designed. One is two-cell cavity and the other is five cell cavity. The two-cell cavity is for finalizing the niobium cavity production procedure and testing the cavity RF properties at a low temperature and moderate power level. The five-cell cavity is for checking the production quality and testing vertical test system in the future. Both of them are under fabrication. Through the fabrication of the niobium prototype, several issues such as deep drawing, electron beam welding and surface treatment will be addressed. The drawing of the PEPF SRF low beta cavity is shown in Fig. 1. Major parameters for the cavity are like following. - Frequency: 700 MHz - Operating mode: TM010 pi mode - Cavity type: Elliptical - Geometrical beta: 0.42 - Number of cells: 5 per cavity - Accelerating gradient: 8 MV/m - Epeak/Eacc: 3.71 - Bpeak/Eacc: 7.47 mT/(MV/m) - R/Q: 102.3 ohm - Epeak: 29.68 MV/m - Field flatness: 1.56 % - Cell to cell coupling: 1.41 % - Geometrical factor: 121.68 ohm - Cavity wall thickness: 4.3 mm - Lorentz force detuning: 0.4 Hz/(MV/m)2 - Stiffening structure: Double ring - Effective length: 0.45 m - External Q of FPC: 8.0E5 ±20 % - HOM load: less than 2 W - HOM Qext requirement: less than 3.0E5 At present, all the niobium disk and plates for cavity and NbTi flanges for beam pipe flange are prepared

The Validity of Subjects in Korean Dental Technicians' Licensing Examination

Directory of Open Access Journals (Sweden)

Woong-chul Kim

2005-06-01

Full Text Available This study prepared a basic framework for the development and improvement of Korean Dental Technicians' Licensing Examination, based on actual test questions. A peer review was conducted to ensure relevance to current practices in dental technology. For the statistical analysis, 1000 dental laboratory technicians were selected; specialists in dental laboratory technology (laboratory owners, educators, etc. were involved in creating valid and reliable questions. Results indicated that examination subjects should be divided into three categories: basic dental laboratory theory, dental laboratory specialties, and a practical examination. To ensure relevance to current practice, there should be less emphasis on basic dental laboratory theory, including health-related laws, and more emphasis on dental laboratory specialties. Introduction to dental anatomy should be separated from oral anatomy and tooth morphology; and fixed prosthodontics should be separated from crown and bridge technology and dental ceramics technology. Removable orthodontic appliance technology should be renamed 'orthodontic laboratory technology'. There should be less questions related to health related law, oral anatomy, dental hygiene, dental materials science and inlay, while the distribution ratio of questions related to tooth morphology should be maintained. There should be a decrease in the distribution ratio of questions related to crown and bridge technology, dental ceramics technology, complete dentures and removable partial dentures technology, and orthodontic laboratory technology. In the practical examination, the current multiple choice test should be replaced with tooth carving using wax or plaster. In dental laboratory specialties, subjects related to contemporary dental laboratory technology should be included in the test items.

Effect of mechanical load cycling on the microleakage of three different glass ionomer restorations in class V cavities

OpenAIRE

Baharan Ranjbar Omidi; Ladan Madani; Aida Mirnejad Joybari; Ensyeh Rashvand; Sonia Oveisi

2015-01-01

Background and Aims: Microleakage is an important problem with direct restorations and familiarity with contributing factors is of utmost importance. The aim of this study was to evaluate the microleakage of three glass ionomer restorations in class V cavities.   Materials and Methods: In this in vitro study, class V cavity preparations were made on the buccal and lingual/ palatal surfaces of 30 human premolars (60 cavities). The specimens were divided into three group (n=10, 20 cavities). Re...

Dental impression technique using optoelectronic devices

Science.gov (United States)

Sinescu, Cosmin; Barua, Souman; Topala, Florin Ionel; Negrutiu, Meda Lavinia; Duma, Virgil-Florin; Gabor, Alin Gabriel; Zaharia, Cristian; Bradu, Adrian; Podoleanu, Adrian G.

2018-03-01

INTRODUCTION: The use of Optical Coherence Tomography (OCT) as a non-invasive and high precision quantitative information providing tool has been well established by researches within the last decade. The marginal discrepancy values can be scrutinized in optical biopsy made in three dimensional (3D) micro millimetre scale and reveal detailed qualitative and quantitative information of soft and hard tissues. OCT-based high resolution 3D images can provide a significant impact on finding recurrent caries, restorative failure, analysing the precision of crown preparation, and prosthetic elements marginal adaptation error with the gingiva and dental hard tissues. During the CAD/CAM process of prosthodontic restorations, the circumvent of any error is important for the practitioner and the technician to reduce waste of time and material. Additionally, OCT images help to achieve a new or semi-skilled practitioner to analyse their crown preparation works and help to develop their skills faster than in a conventional way. The aim of this study is to highlight the advantages of OCT in high precision prosthodontic restorations. MATERIALS AND METHODS: 25 preparations of frontal and lateral teeth were performed for 7 different patients. The impressions of the prosthetic fields were obtained both using a conventional optoelectronic system (Apolo Di, Syrona) and a Spectral Domain using OCT (Dental prototype, working at 860 nm). For the conventional impression technique the preparation margins were been prelevated by gingival impregnated cords. No specific treatments were performed by the OCT impression technique. RESULTS: The scanning performed by conventional optoelectronic system proved to be quick and accurate in terms of impression technology. The results were represented by 3D virtual models obtained after the scanning procedure was completed. In order to obtain a good optical impression a gingival retraction cord was inserted between the prepared tooth and the gingival

Dental Hygienists Licensed in Washington.

Science.gov (United States)

Washington State Dept. of Social and Health Services, Olympia. Health Manpower Project.

Beginning with a statement on the profession of dental hygiene and the two types of professional preparation available in the field, the pilot study then presents a two-part summary of its findings and an explanation of the methodology employed. Part I of the main portion of the report concerns employment characteristics (status, age, residence,…

IMRT delivers lower radiation doses to dental structures than 3DRT in head and neck cancer patients.

Science.gov (United States)

Fregnani, Eduardo Rodrigues; Parahyba, Cláudia Joffily; Morais-Faria, Karina; Fonseca, Felipe Paiva; Ramos, Pedro Augusto Mendes; de Moraes, Fábio Yone; da Conceição Vasconcelos, Karina Gondim Moutinho; Menegussi, Gisela; Santos-Silva, Alan Roger; Brandão, Thais B

2016-09-07

Radiotherapy (RT) is frequently used in the treatment of head and neck cancer, but different side-effects are frequently reported, including a higher frequency of radiation-related caries, what may be consequence of direct radiation to dental tissue. The intensity-modulated radiotherapy (IMRT) was developed to improve tumor control and decrease patient's morbidity by delivering radiation beams only to tumor shapes and sparing normal tissue. However, teeth are usually not included in IMRT plannings and the real efficacy of IMRT in the dental context has not been addressed. Therefore, the aim of this study is to assess whether IMRT delivers lower radiation doses to dental structures than conformal 3D radiotherapy (3DRT). Radiation dose delivery to dental structures of 80 patients treated for head and neck cancers (oral cavity, tongue, nasopharynx and oropharynx) with IMRT (40 patients) and 3DRT (40 patients) were assessed by individually contouring tooth crowns on patients' treatment plans. Clinicopathological data were retrieved from patients' medical files. The average dose of radiation to teeth delivered by IMRT was significantly lower than with 3DRT (p = 0.007); however, only patients affected by nasopharynx and oral cavity cancers demonstrated significantly lower doses with IMRT (p = 0.012 and p = 0.011, respectively). Molars received more radiation with both 3DRT and IMRT, but the latter delivered significantly lower radiation in this group of teeth (p dental groups. Maxillary teeth received lower doses than mandibular teeth, but only IMRT delivered significantly lower doses (p = 0.011 and p = 0.003). Ipsilateral teeth received higher doses than contralateral teeth with both techniques and IMRT delivered significantly lower radiation than 3DRT for contralateral dental structures (p radiation doses to teeth than 3DRT, but only for some groups of patients and teeth, suggesting that this decrease was more likely due to the protection of

Estimation of efficiency of new local rehabilitation method at the early post-operative period after dental implantation

Directory of Open Access Journals (Sweden)

A. V. Pasechnik

2017-01-01

  Summary Despite of success of dental implantation, there are often complications at the early post-operative period of implant placing associated with wound damage and aseptic inflammation. Purpose of the work is studying clinical efficiency of combined local application of new mucosal gel “Apior” and magnetotherapy at the early post-operative period after dental implantation. Combined local application of the mucosal gel “Apior” and pulsating low-frequency electromagnetic field in the complex medical treatment of patients after conducting an operation of setting dental implants favourably affects the common state of patients and clinical symptoms of inflammation in the area of operating wound. As compared with patients who had traditional anti-inflammatory therapy, the patients treated with local application of apigel and magnetoterapy had decline of edema incidence, of gingival mucosa hyperemia, of discomfort in the area of conducted operation. There occurred more rapid improvement of inflammation painfulness, which correlated with the improvement of hygienic state of oral cavity and promoted to prevention of bacterial content of damaged mucous surfaces. Estimation of microvasculatory blood stream by the method of ultrasonic doppler flowmetry revealed more rapid normalization of volume and linear high systole speed of blood stream in the periimplant tissues in case of use of new complex local rehabilitation method, that testified to the less pronounced inflammation of oral mucosa after the operation. The authors came to conclusion that the local application of the offered method of medical treatment of early post-operative complications of dental implantation reduces terms of renewal of structural-functional integrity of oral mucosa, helps in preventing development of inflammatory complications and strengthening endosseus implant. The inclusion in the treatment management of a new combined method of application of mucosal gel “Apior” and

Cell-derived micro-environment helps dental pulp stem cells promote dental pulp regeneration.

Science.gov (United States)

Zhang, Xuexin; Li, Hui; Sun, Jingjing; Luo, Xiangyou; Yang, Hefeng; Xie, Li; Yang, Bo; Guo, Weihua; Tian, Weidong

2017-10-01

The function of the dental pulp is closely connected to the extracellular matrix (ECM) structure, and ECM has received significant attention due to its biological functions for regulating cells. As such, the interaction between the ECM niche and cells is worth exploring for potential clinical uses. In this study, dental pulp stem cell (DPSC)-derived ECM (DPM) was prepared through cell culture and decellularization to function as the cell niche, and changes in DPSC behaviour and histological analysis of dental pulp tissue regeneration were evaluated following the DPM culture. DPM promoted the replication of DPSCs and exhibited retention of their mineralization. Then, the DPM-based culture strategy under odontogenic culture medium was further investigated, and the mineralization-related markers showed that DPSCs were regulated towards odontogenic differentiation. Dental pulp-like tissue with well-arranged ECM was harvested after a 2-month subcutaneous implantation in nude mice with DPM application. Additionally, DPSCs cultured on the plastic culture surface showed the up-regulation of mineralization makers in vitro, but there was a disorder in matrix formation and mineralization when the cells were cultured in vivo. DPM-based cultivation could serve as a cell niche and modulate DPSC behaviour, and this method also provided an alternative to harvest tissue-specific ECM and provided a strategy for ECM-cell interaction. © 2017 John Wiley & Sons Ltd.

Preparation of fluoride substituted apatite cements as the building blocks for tooth enamel restoration

International Nuclear Information System (INIS)

Wei Jie; Wang Jiecheng; Liu Xiaochen; Ma Jian; Liu Changsheng; Fang Jing; Wei Shicheng

2011-01-01

Fluoride substituted apatite cement (fs-AC) was synthesized by using the cement powders of tetracalcium phosphate (TTCP) and sodium fluoride (NaF), and the cement powders were mixed with diluted phosphoric acid (H 3 PO 4 ) as cement liquid to form fs-AC paste. The fs-AC paste could be directly filled into the carious cavities to repair damaged dental enamel. The results indicated that the fs-AC paste was changed into fluorapatite crystals with the atom molar ratio for calcium to phosphorus of 1.66 and the F ion amount of 3 wt% after self-hardening for 2 days. The solubility of fs-AC in Tris-HCl solution (pH 6) was slightly lower than hydroxyapatite cement (HAC) that was similar to the apatite in enamel, indicating the fs-AC was much insensitive to the weakly acidic solution than the apatite in enamel. The fs-AC was tightly combined with the enamel surface because of the chemical reaction between the fs-AC and the apatite in enamel after the caries cavities was filled with fs-AC. The extracts of fs-AC caused no cytotoxicity on L929 cells, which satisfied the relevant criterion on dental biomaterials, revealing good cytocompatibility. The fs-AC had potential prospect for the reconstitution of carious lesion of dental enamel.

Fluoride Increase in Saliva and Dental Biofilm due to a Meal Prepared with Fluoridated Water or Salt: A Crossover Clinical Study.

Science.gov (United States)

Lima, Carolina V; Tenuta, Livia M A; Cury, Jaime A

2018-06-07

Knowledge about fluoride delivery to oral fluids from foods cooked with fluoridated water and salt is scarce, and no study has evaluated fluoride concentrations in saliva or biofilm during meal consumption. In this randomized double-blind crossover study, 12 volunteers ingested meals (rice, beans, meat, and legumes) prepared with nonfluoridated water and salt (control group), fluoridated water (0.70 mg F/L; water group), and fluoridated salt (183.7 mg F/kg; salt group). Whole saliva was collected before meal ingestion, during mastication, and up to 2 h after meal ingestion. Dental biofilm was collected before and immediately after meal ingestion. Fluoride concentrations in saliva and dental biofilm were determined by an ion-specific electrode. The mean (±standard deviation; n = 4) fluoride concentrations in meals prepared for the control, water, and salt groups were 0.039 ± 0.01, 0.43 ± 0.04, and 1.71 ± 0.32 μg F/g, respectively. The three groups had significantly different fluoride concentrations in saliva collected during mastication (p water > control). The fluoride concentration in saliva returned to baseline 30 min after meal ingestion in the water group but remained high for up to 2 h in the salt group (p = 0.002). The fluoride concentration in biofilm fluid differed only between the salt and control groups (p = 0.008). The mastication of foods cooked with fluoridated water and salt increases fluoride concentrations in oral fluids and may contribute to the local effect of these community-based fluoride interventions on caries control. © 2018 S. Karger AG, Basel.

The fluorescence in the diagnosis of dental tissue

International Nuclear Information System (INIS)

Puron, E.; Homs, R.; Paya, R. M.

2012-01-01

An experimental method for obtaining fluorescence of the dental tissue is described. A comparative analysis for the behaviour of the tissue fluorescence, both, healthy or intact enamel and carious samples is presented; the comparison of the obtained results with the ones described in the literature is done. Optical methods for the detection of carious lesions have the advantage of being minimally invasive. For this reason, induced fluorescence with a blue light to detect the presence of the Streptococcus in the oral cavity is proposed as an identifier method for find initial caries in dentistry in our country. (Author)

Quality assurance in digital dental radiography--justification and dose reduction in dental and maxillofacial radiology.

Science.gov (United States)

Hellstern, F; Geibel, M-A

2012-01-01

To evaluate the implementation of quality assurance requirements for digital dental radiography in routine clinical practice. The results should be discussed by radiation protection authorities in the context of the relevant legal requirements and current debates on radiation protection. Two hundred digital dental radiographs were randomly selected from the digital database of the Department of Dentistry's Dental and Maxillofacial Surgery Clinic, Ulm University, and evaluated for various aspects of image quality and compliance with radiographic documentation requirements. The dental films were prepared by different radiology assistants (RAs) using one of two digital intraoral radiographic systems: Sirona Heliodent DS, 60 kV, focal spot size: 0.7 mm (group A) or KaVo Gendex 765 DC, 65 kV, focal spot size: 0.4 mm (group B). Radiographic justification was documented in 70.5% of cases, and the radiographic findings in 76.5%. Both variables were documented in the patient records as well as in the software in 14% of cases. Clinical documentation of the required information (name of the responsible dentist and radiology assistant, date, patient name, department, tube voltage, tube current, exposure time, type of radiograph, film size, department and serial number of the dental radiograph) was 100% complete in all cases. Moreover, the department certified according to DIN ISO 9001:2008 specifications demonstrated complete clinical documentation of radiographic justifications and radiographic findings. The entire dentition was visible on 83% of the digital films. The visible area corresponded to the target region on 85.7% of the digital dental radiographs. Seven to 8.5% of the images were classified as "hypometric" or "hypermetric". This study indicates that improvements in radiology training and continuing education fordentists and dental staff performing x-ray examinations are needed to ensure consistent high quality of digital dental radiography. Implementation of

Development and outcomes of an online-onsite hybrid dental admissions enhancement pilot program.

Science.gov (United States)

Hanson, Carrie L; Van Ness, Chris; Gadbury-Amyot, Cynthia C; Crain, Geralyn

2014-10-01

The University of Missouri-Kansas City (UMKC) School of Dentistry has piloted two years of an Admissions Enhancement Program (AEP) with students from underrepresented minority groups and/or economically disadvantaged areas of Missouri interested in applying to dental school. The AEP utilizes an innovative online-onsite hybrid format to elevate students' foundational knowledge in biology, chemistry, organic chemistry, and quantitative reasoning. The online component includes interaction with UMKC instructors using tablet technology and Wimba virtual classroom sessions. The onsite component engages students in academic and professional development, enrichment activities targeting skills training, experience in dental labs and clinics, and mentoring in preparing the dental school application, essay writing, and interviewing. Results to date indicate overall program satisfaction among AEP participants and a dental school acceptance rate of 73.7 percent (14/19 students). Participants reported the mock interviews and essay-writing portions contributed to their becoming competitive candidates for the admission process, and the online material enhanced their preparation for the Dental Admission Test (DAT). Pre- and post-AEP data show participant DAT Academic Average scores increased by two points. The school will continue to monitor program participants in subsequent years.

Success rates of the first inferior alveolar nerve block administered by dental practitioners.

Science.gov (United States)

Kriangcherdsak, Yutthasak; Raucharernporn, Somchart; Chaiyasamut, Teeranut; Wongsirichat, Natthamet

2016-06-01

Inferior alveolar nerve block (IANB) of the mandible is commonly used in the oral cavity as an anesthetic technique for dental procedures. This study evaluated the success rate of the first IANB administered by dental practitioners. Volunteer dental practitioners at Mahidol University who had never performed an INAB carried out 106 INAB procedures. The practitioners were divided into 12 groups with their advisors by randomized control trials. We recorded the success rate via pain visual analog scale (VAS) scores. A large percentage of the dental practitioners (85.26%) used the standard method to locate the anatomical landmarks, injecting the local anesthetic at the correct position, with the barrel of the syringe parallel to the occlusal plane of the mandibular teeth. Further, 68.42% of the dental practitioners injected the local anesthetic on the right side by using the left index finger for retraction. The onset time was approximately 0-5 mins for nearly half of the dental practitioners (47.37% for subjective onset and 43.16% for objective onset), while the duration of the IANB was approximately 240-300 minutes (36.84%) after the initiation of numbness. Moreover, the VAS pain scores were 2.5 ± 1.85 and 2.1 ± 1.8 while injecting and delivering local anesthesia, respectively. The only recorded factor that affected the success of the local anesthetic was the administering practitioner. This reinforces the notion that local anesthesia administration is a technique-sensitive procedure.

The prevalence and intensity of the main dental diseases in children of Simferopol

Directory of Open Access Journals (Sweden)

Bushma N.V.

2013-06-01

Full Text Available At present, despite the availability of modern effective oral hygiene means and prevention of dental diseases, which reduced their intensity, disease prevalence remains high. One method of dental caries preventing in children aged 6-7 years is a fissure sealing of molars, the most vulnerable areas of the newly erupted teeth, having a number of problems associated with a complex fissures relief. The purpose of this study was to investigate the prevalence and intensity of dental diseases and their development trends, as well as indicators of electrometric fissures of teeth in children aged 6-7 years of Simferopol. 87 children aged 6-7 years (first classes schools in Simferopol were examined. In this case, assessed the state of hard dental tissues (CFt, CFf, CFDt, CFDf, cavities, fillings, chalk spots, depigmentation, complications in the structure of lesions, the state of periodontal tissue (PMA%, bleeding, Schiller-Pisarev test, CPITN and oral hygiene (Silness-Loe, Stallard were examined. For diagnosing electrometry of hard tissues of dental fissures DentEst apparatus was used. Studies of major dental diseases and electrometric indicators of hard tissues of molars fissures in children under study testifies to a high caries incidence in temporary and permanent teeth and a tendency to increase of caries prevalence of permanent occlusion in these children, poor oral hygiene and the need to develop and implement treatment and preventive measures that not allow the development of caries process in the teeth of permanent occlusion.

Characterization of the bioactive and mechanical behavior of dental ceramic/sol-gel derived bioactive glass mixtures.

Science.gov (United States)

Abbasi, Zahra; Bahrololoum, Mohammad E; Bagheri, Rafat; Shariat, Mohammad H

2016-02-01

Dental ceramics can be modified by bioactive glasses in order to develop apatite layer on their surface. One of the benefits of such modification is to prolong the lifetime of the fixed dental prosthesis by preventing the formation of secondary caries. Dental ceramic/sol-gel derived bioactive glass mixture is one of the options for this modification. In the current study, mixtures of dental ceramic/bioactive glass with different compositions were successfully produced. To evaluate their bioactive behavior, prepared samples were immersed in a simulated body fluid at various time intervals. The prepared and soaked specimens were characterized using Fourier transform infrared spectroscopy, X-ray diffractometry and scanning electron microscopy. Since bioactive glasses have deleterious effects on the mechanical properties of dental ceramics, 3-point bending tests were used to evaluate the flexural strength, flexural strain, tangent modulus of elasticity and Weibull modulus of the specimens in order to find the optimal relationship between mechanical and bioactive properties. Copyright © 2015 Elsevier Ltd. All rights reserved.

Emerging scientific advances: how do they enter dental curricula and the profession?

Science.gov (United States)

Shuler, Charles F

2005-10-01

What is meant by emerging scientific advances? In brief, this terminology is equivalent to new research findings, however, the term "research" is often associated with scientific investigations that have very limited direct clinical relevance. Unfortunately, basic dental research and dental clinical practice have, in many instances, been considered to have nonoverlapping spheres of existence. The existence of mutually exclusive domains is rapidly changing with considerable translational activities between basic research investigation and clinical application developing. There is a growing emphasis at a national level for the importance of moving basic biomedical research laboratory findings into clinical patient-related applications to realize improvements in health based on the research findings. Ultimately, new approaches to diagnose, treat, and prevent disease will be available and represent the translation of the best scientific evidence into clinical applications. It is critical at this time to prepare our dental graduates to be members of the dental profession who will understand the implications that new scientific advances will have on their approach to patient care. The patterns and practices of oral health care delivery will undergo major changes during the careers of our new dental graduates. They need to be prepared to respond to these changes to the benefit of their patients.

Cadmium Profiles in Dental Calculus: a Cross-Sectional Population-Based Study in Hunan Province of China.

Science.gov (United States)

Zhang, Bo; Tan, Xiaodan; Zhang, Kunlun

2018-01-24

We aimed to investigate whether the cadmium concentrations differ in human dental calculus obtained from the residents with no smoking living in the contaminated area and those with no smoking living in noncontaminated area. In total, there were 260 samples of dental calculus from the adults (n = 50) with no smoking living in contaminated area, the adults (n = 60) with no smoking living in mountainous area, and the adults (n = 150) with no smoking living in low altitude area in Hunan province of China. All samples were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) for cadmium levels. The cadmium levels in dental calculus were significantly higher in the adults with no smoking living in contaminated area than those living in mountainous area and in low altitude area (p dental calculus were also higher in the adults with no smoking living in low altitude area than those living in mountainous region (p dental calculus may be a useful noninvasive method for analysis of environmental exposure to cadmium in the human oral cavity. The low altitude region may have an area contaminated with cadmium in Hunan province of China.

Comparing Practice Management Courses in Canadian Dental Schools.

Science.gov (United States)

Schonwetter, Dieter J; Schwartz, Barry

2018-05-01

Practice management has become an increasingly important aspect of dental education over the years in order to better prepare students for the reality of practice. The aim of this study was to quantify and describe practice management courses taught at the ten Canadian dental schools in order to identify common approaches, compare hours, determine types of instructors, and assess the relationship between courses' learning objectives and the Association of Canadian Faculties of Dentistry (ACFD) competencies and Bloom's cognitive levels. The academic deans at these ten schools were surveyed in 2016; all ten schools responded for a 100% response rate. The authors also gathered syllabi and descriptions of the courses and analyzed them for themes. The results showed a total of 22 practice management courses in the ten Canadian dental schools. The courses provided 27 to 109 hours of teaching and were mostly taught in the third and fourth years and by dentists on three main topics: ethics, human resource management, and running a private practice. The courses were correlated to the ACFD competencies related to ethics, professionalism, application of basic principles of business practices, and effective interpersonal communication. Most of the courses' learning objectives addressed comprehension and knowledge in Bloom's cognitive levels of learning. These results can help to guide discussions on how practice management courses can be developed, improved, and refined to meet the challenges of preparing students for dental practice.

Evaluating the relationship between dental caries number and salivary level of IgA in adults

Science.gov (United States)

Haeri-Araghi, Hesam; Safarzadeh-Khosroshahi, Shadab; Mirzadeh, Monirsadat

2018-01-01

Background Dental caries are the most common mouth infectious disease and also chronic disease of childhood. Saliva plays different roles in oral cavity; for example, salivary immunoglobulins play significant role in body and oral immunity. Various studies were conducted on the different effects of IgA on oral cavity, especially dental caries, and reported controversial results. The current study aimed to compare salivary IgA level at different stages of dental caries in adults. Material and Methods A total of 40 adults, aged 20 to 40 years, referred to the department of oral medicine at Qazvin Faculty of Dentistry, were selected voluntarily based on the number of decayed teeth. Their unstimulated saliva was collected by the spitting method. The cases were assigned to 4 groups each of 10, based on the number of decayed teeth, as follows: Group 1: Caries free, Group 2: With 1 or 2 decayed teeth, Group 3: With 3 or 4 decayed teeth, and Group 4: With 5 or more decayed teeth. None of the cases had systemic diseases or the history of using medicines which affect the quality or quantity of saliva. The salivary IgA level of the cases was measured immunoturbidometrically and analyzed by ANOVA and t test. Results Significant difference was observed between the groups 1 and 4, but there was no significant difference between the other groups. Conclusions According to the results of the current study, the salivary IgA can be considered as an index for the function of immune system, which may be increased by the number of decayed teeth. In fact, the increase of salivary IgA is just the response of immune system to the accumulation of microorganisms and may be the attempt of body to control them. Key words:Saliva, IgA, Dental caries. PMID:29670718

Dental health in children with type I diabetes mellitus and ways of its improvement

Directory of Open Access Journals (Sweden)

A. K. Iordanishvili

2017-01-01

Full Text Available The impact of a somatic disease on the status of the hard tissues of the teeth and periodontium and the level of individual oral hygiene were evaluated during one-year follow-up of the dental status in 59 children (31 boys, 28 girls aged 5 to 7 years, of whom 34 children had diabetes mellitus. Upon completion of oral cavity sanation, the children used R.O.C.S. «Kids» toothbrushes with extra-soft bristle and R.O.C.S. PRO Kids «Wild berries» toothpaste for oral care. The children with type 1 diabetes mellitus were established to more frequently suffer from inflammatory periodontal abnormality than the healthy children and dental caries in the former was more intensive than in the children without somatic diseases. To maintain their dental health, the diabetic children should undergo quarterly professional therapeutic and prophylactic measures, by using oral care products in accordance with the patients’ age.

Influence of sucrose and xylitol on an early Streptococcus mutans biofilm in a dental simulator.

Science.gov (United States)

Salli, K M; Forssten, S D; Lahtinen, S J; Ouwehand, A C

2016-10-01

In vitro methods to study dental biofilms are useful in finding ways to support a healthy microbial balance in the oral cavity. The effects of sucrose, xylitol, and their combination on three strains of Streptococcus mutans and one strain of Streptococcus sobrinus were studied using a dental simulator. A simulator was used to mimic the oral cavity environment. It provided a continuous-flow system using artificial saliva (AS), constant temperature, mixing, and hydroxyapatite (HA) surface in which the influence of xylitol was studied. The quantities of planktonic and adhered bacteria were measured by real-time qPCR. Compared against the untreated AS, adding 1% sucrose increased the bacterial colonization of HA (pmutans isolate 117. The combination of xylitol and sucrose decreased the bacterial quantities within the AS and the colonization on the HA by clinical S. mutans isolate 2366 was reduced (pmutans strains to adhere to the HA. Clinical studies have also shown that xylitol consumption decreases caries incidence and reduces the amount of plaque. This study contributes to the understanding of the mechanism behind these clinical observations. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluation of the temperature rise in pulp chamber during class V preparation with Er:YAG laser; Avaliacao da temperatura na camara pulpar durante preparo classe V com laser de Erbio:YAG

Energy Technology Data Exchange (ETDEWEB)

Picinini, Leonardo Santos

2001-07-01

One of the major concerns regarding laser irradiation in the dentistry field is the overheating in dental tissue, specially pulpal tissue. A temperature raise over 5.5 deg C is considered to be harmful to its vitality. The current study evaluated the temperature increase in the pulp chamber, during class V preparation, performed with the laser Er:YAG in 36 bovine incisive extracted teeth. The samples were eroded on the outer side of the vestibular wall to obtain the dentinal thickness of 2.0 mm (group I), 1.0 mm (group II) and 0.5 mm (group III). Thermocouples were fixed to the inner part of the vestibular wall using thermal paste, through the palatine opening of the samples. Class V cavities were prepared in the vestibular side only in 1 mm{sup 2} thick dentins. Irradiation parameters used were: 500 mJ/10 Hz, 850 mJ/10 Hz and 1 000 mJ/10 Hz for all the groups. The results were processed by a microcomputer. This study showed that the temperature increased into the pulpal cavity reached around 3 deg C for the groups I (2,0 mm thick dentine) and II (1.0 mm thick dentine). In the group III (0.5 mm thick) temperature was around 5.5 deg C. Thus, the parameters used for cavity preparation, using Er:YAG laser, were safe in relation to the temperature raise for dentinal thickness of 1,0 and 2,0 mm; in 0.5 mm thick dentins, temperature increase reached 5.5 deg C and an appropriate correction in the laser parameters was necessary. (author)

Wear resistance of a pressable low-fusing ceramic opposed by dental alloys.

Science.gov (United States)

Faria, Adriana Cláudia Lapria; de Oliveira, André Almeida; Alves Gomes, Érica; Silveira Rodrigues, Renata Cristina; Faria Ribeiro, Ricardo

2014-04-01

Dental alloys have increasingly replaced by dental ceramics in dentistry because of aesthetics. As both dental alloys and ceramics can be present in the oral cavity, the evaluation of the wear resistance of ceramics opposed by dental alloys is important. The aim of the present study was to evaluate wear resistance of a pressable low-fusing ceramic opposed by dental alloys as well as the microhardness of the alloys and the possible correlation of wear and antagonist microhardness. Fifteen stylus tips samples of pressable low-fusing ceramic were obtained, polished and glazed. Samples were divided into three groups according to the disk of alloy/metal to be used as antagonist: Nickel-Chromium (Ni-Cr), Cobalt-Chromium (Co-Cr) and commercially pure titanium (cp Ti). Vickers microhardness of antagonist disks was evaluated before wear tests. Then, antagonist disks were sandblasted until surface roughness was adjusted to 0.75μm. Wear tests were performed at a speed of 60 cycles/min and distance of 10mm, in a total of 300,000 cycles. Before and after wear tests, samples were weighted and had their profile designed in an optical comparator to evaluate weight and height loss, respectively. Ni-Cr and cp Ti caused greater wear than Co-Cr, presenting greater weight (p=.009) and height (p=.002) loss. Cp Ti microhardness was lower than Ni-Cr and Co-Cr (pceramic presents different wear according to the dental alloy used as antagonist and the wear is not affected by antagonist microhardness. Copyright © 2013 Elsevier Ltd. All rights reserved.

Considerations for services from dental technicians in fabrication of fixed prostheses: A survey of commercial dental laboratories in Thessaloniki, Greece.

Science.gov (United States)

Hatzikyriakos, Andreas; Petridis, Haralampos P; Tsiggos, Nikolaos; Sakelariou, Sotirios

2006-11-01

Effective communication and cooperation between dentists and dental technicians are essential in providing quality services. There has been a lack of information regarding dentist-dental technician communications and current methods and materials used for the fabrication of fixed partial dentures (FPDs). This cross-sectional study identified the materials and techniques used for fabrication of FPDs, as well as the status of communication between dentists and dental technicians in Thessaloniki, Greece. A questionnaire was developed with 7 sections pertaining to procedures and materials used for the fabrication of fixed prostheses: general questions, infection control, impressions/interocclusal records, die technique/mounting, information from final casts, prostheses design/materials, and communication/shade selection. The questionnaire was anonymous and distributed by the Association of Dental Technicians of Thessaloniki to all member laboratories (228) in the wider province of Thessaloniki, Greece. Due to the absence of normal distribution of the results, frequencies and medians were reported. Ninety-six of 228 dental laboratories responded (42.1% response rate). Twenty-six percent of dental laboratories did not routinely disinfect incoming items. The dental technicians considered 30% of incoming final impressions and 20% of interocclusal registrations as inadequate. Half of the time (55%) final casts were mounted by technicians on simple hinge articulators. Only 20% of tooth preparations had adequate finish lines. The majority (70%) of fixed restorations were metal-ceramic. Fifty-seven percent of dental technicians considered the delivery time requested by dentists as insufficient. The information provided in this study indicates areas of weakness in communication between dentists and dental technicians, along with areas where both parties should use greater care during clinical and laboratory procedures.

Microradiographical aspects of maxillo-dental lesions in the irradiated cat

International Nuclear Information System (INIS)

Dambrain, R.; Dhem, A.; Winant, M.; Wambersie, A.

1986-01-01

This paper describes the reactions of bone tissue and teeth, in cats, after continuous low rate irradiation, in conditions similar to those encountered in interstitial therapy. Irradiations were performed using 3 hairpin shape iridium-192 wires. The doses were assessed following the Paris System. As far as the teeth are concerned, the development proceeds normally after 60 Gy irradiation delivered over 6 days. At 80 Gy, irradiation has an indirect effect on the teeth by altering the salivary environment; the dental crowns are coated with a thick layer of tarter and show cavities reaching the pulp. As far as the bony tissue is concerned, its normal development is not altered after 60 Gy. At 80 Gy, a destructive process appears, similar to those oberved in patients with mandibular osteoradionecrosis. The foci of destruction are very irregular in shape; the cavities do not contain osteoclasts but small mononucleated cells

Cutting characteristics of dental diamond burs made with CVD technology Características de corte de pontas odontológicas diamantadas obtidas pela tecnologia CVD

Directory of Open Access Journals (Sweden)

Luciana Monti Lima

2006-04-01

Full Text Available The aim of this study was to determine the cutting ability of chemical vapor deposition (CVD diamond burs coupled to an ultrasonic dental unit handpiece for minimally invasive cavity preparation. One standard cavity was prepared on the mesial and distal surfaces of 40 extracted human third molars either with cylindrical or with spherical CVD burs. The cutting ability was compared regarding type of substrate (enamel and dentin and direction of handpiece motion. The morphological characteristics, width and depth of the cavities were analyzed and measured using scanning electron micrographs. Statistical analysis using the Kruskal-Wallis test (p O objetivo deste estudo foi determinar a habilidade de corte das pontas de diamante obtidas pelo processo de deposição química a vapor (CVD associadas ao aparelho de ultra-som no preparo cavitário minimamente invasivo. Uma cavidade padronizada foi preparada nas faces mesial e distal de 40 terceiros molares, utilizando-se pontas de diamante CVD cilíndrica e esférica. A habilidade de corte foi comparada quanto ao tipo de substrato (esmalte e dentina e quanto à direção do movimento realizado com a ponta. As características morfológicas, a largura e profundidade das cavidades foram analisadas e medidas em microscopia eletrônica de varredura. A análise estatística pelo teste de Kruskal-Wallis (p < 0,05 revelou que a largura e profundidade das cavidades foram significativamente maiores em dentina. Cavidades mais largas foram obtidas quando se utilizou a ponta de diamante CVD cilíndrica, e mais profundas quando a ponta esférica foi empregada. A direção do movimento da ponta não influenciou o tamanho das cavidades, sendo os cortes produzidos pelas pontas de diamante CVD precisos e conservadores.

Development of fluorapatite cement for dental enamel defects repair.

Science.gov (United States)

Wei, Jie; Wang, Jiecheng; Shan, Wenpeng; Liu, Xiaochen; Ma, Jian; Liu, Changsheng; Fang, Jing; Wei, Shicheng

2011-06-01

In order to restore the badly carious lesion of human dental enamel, a crystalline paste of fluoride substituted apatite cement was synthesized by using the mixture of tetracalcium phosphate (TTCP), dicalcium phosphate anhydrous (DCPA) and ammonium fluoride. The apatite cement paste could be directly filled into the enamel defects (cavities) to repair damaged dental enamel. The results indicated that the hardened cement was fluorapatite [Ca(10)(PO(4))(6)F(2), FA] with calcium to phosphorus atom molar ratio (Ca/P) of 1.67 and Ca/F ratio of 5. The solubility of FA cement in Tris-HCl solution (pH = 5) was slightly lower than the natural enamel, indicating the FA cement was much insensitive to the weakly acidic solutions. The FA cement was tightly combined with the enamel surface, and there was no obvious difference of the hardness between the FA cement and natural enamel. The extracts of FA cement caused no cytotoxicity on L929 cells, which satisfied the relevant criterion on dental biomaterials, revealing good cytocompatibility. In addition, the results showed that the FA cement had good mechanical strength, hydrophilicity, and anti-bacterial adhesion properties. The study suggested that using FA cement was simple and promising approach to effectively and conveniently restore enamel defects.

Niobium Coatings for the HIE-ISOLDE QWR Superconducting Accelerating Cavities

CERN Document Server

Jecklin, N; Delaup, B; Ferreira, L; Mondino, I; Sublet, A; Therasse, M; Venturini Desolaro, W

2013-01-01

The HIE-ISOLDE (High Intensity and Energy at ISOLDE) project is the upgrade of the existing ISOLDE (Isotope Separator On Line DEvice) facility at CERN, which is dedicated to the production of a large variety of radioactive ion beams for nuclear physics experiments. A new linear accelerator made of 20 ȕ=10.3% and 12 ȕ=6.3% quarter-wave resonators (QWR) superconducting (SC) accelerating cavities at 101 MHz will be built, and in a first phase two cryomodules of 5 high-ȕ cavities each are scheduled to accelerate first beams in 2015. The cavities are made of a copper substrate, with a sputter-coated superconductive niobium (Nb) layer, operated at 4.5 K with an accelerating field of 6 MV/m at 10W Radio-Frequency (RF) losses (Q=4.5· 108). In this paper we will discuss the baseline surface treatment and coating procedure which allows obtaining the required performance, as well as the steps undertaken in order to prepare series production of the required number of cavities guaranteeing their quality and functional...

Safety Assessment of Two Hybrid Instrumentation Techniques in a Dental Student Endodontic Clinic: A Retrospective Study.

Science.gov (United States)

Coelho, Marcelo Santos; Card, Steven John; Tawil, Peter Zahi

2017-03-01

The aim of this study was to retrospectively assess the safety potential of a hybrid technique combining nickel-titanium (NiTi) reciprocating and rotary instruments by third- and fourth-year dental students in the predoctoral endodontics clinic at one U.S. dental school. For the study, 3,194 root canal treatments performed by 317 dental students from 2012 through 2015 were evaluated for incidence of ledge creation and instrument separation. The hybrid reciprocating and rotary technique (RRT) consisted of a glide path creation with stainless steel hand files up to size 15/02, a crown down preparation with a NiTi reciprocating instrument, and an apical preparation with NiTi rotary instruments. The control was a traditional rotary and hand technique (RHT) that consisted of the same glide path procedure followed by a crown down preparation with NiTi rotary instruments and an apical preparation with NiTi hand instruments. The results showed that the RHT technique presented a rate of ledge creation of 1.4% per root and the RRT technique was 0.5% per root (protary technique for root canal instrumentation by these dental students provided good safety. This hybrid technique offered a low rate of ledge creation along with no NiTi instrument separation.

Laboratory tests for assessing adaptability and stickiness of dental composites.

Science.gov (United States)

Rosentritt, Martin; Buczovsky, Sebastian; Behr, Michael; Preis, Verena

2014-09-01

Handling (stickiness, adaptability) of a dental composite does strongly influence quality and success of a dental restoration. The purpose was to develop an in vitro test, which allows for evaluating adaptability and stickiness. 15 dentists were asked for providing individual assessment (school scores 1-6) of five dental composites addressing adaptability and stickiness. Composites were applied with a dental plugger (d=1.8 mm) in a class I cavity (human tooth 17). The tooth was fixed on a force gauge for simultaneous determination of application forces with varying storage (6/25°C) and application temperatures (6/25°C). On basis of these data tensile tests were performed with a dental plugger (application force 1N/2N; v=35 mm/min) on PMMA- or human tooth plates. Composite was dosed onto the tip of the plugger and applied. Application and unplugging was performed once and unplugging forces (UF) and length of the adhesive flags (LAF) were determined at different storage (6/25°C) and application temperatures (25/37°C). Unplugging work (UW) was calculated from area of UF and LAF data. The individual assessment revealed significantly different temperature-dependent application forces between 0.58 N and 2.23 N. Adaptability was assessed between 2.1 and 2.8 school scores. Stickiness varied significantly between the materials (scores: 2-3.2). UW differed significantly between the materials with values between 3.20 N mm and 37.83 N mm. Between PMMA substrate or tooth slides and between 1N or 2N application force only small UW differences were found. The presented in vitro unplugging work allows for an in vitro estimation of the handling parameters adaptability and stickiness. Copyright © 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Effectiveness of the self-adjusting file versus ProTaper systems to remove the smear layer in artificially induced internal root resorption cavities

Directory of Open Access Journals (Sweden)

Senem Yigit Özer

2013-01-01

Full Text Available Aim: Smear layer removal from artificially prepared internal root resorption (IRR cavities using the self-adjusting file (SAF system with activated continuous irrigation or the ProTaper system (Dentsply Maillefer, Ballaigues, Switzerland with conventional syringe/needle irrigation was compared. Materials and methods: Twenty-eight maxillary central incisors were selected, decoronated and 20 of them were randomizedly splited along the coronal plane into labial and lingual sections, and artificial IRR cavities were prepared in both walls. Tooth segments were rejoined and teeth were divided into two groups. Each group (n = 10 was prepared using the SAF or ProTaper system with 12-mL 5.25% NaOCl and 12-mL 17% EDTA. Root canals were prepared in six intact positive control teeth using the SAF or ProTaper system with 5.25% NaOCl and 17% EDTA. As negative controls, two intact teeth were prepared using NaOCl only. Roots were than split longitudinally from the rejoined segments and samples were evaluated under scanning electron microscopy using a five-point scoring system. Results: Most SAF (87% and ProTaper (83% samples (P > 0.05, had scores of 1 and 2 indicating clean canal walls for the IRR cavities. Conclusions: SAF with activated continuous irrigation and ProTaper with conventional syringe/needle irrigation both successfully removed the smear layer from artificially prepared IRR cavities

State of the art of multicell SC cavities and perspectives

International Nuclear Information System (INIS)

Peter Kneisel

2002-01-01

Superconducting cavity technology has made major progresses in the last decade with the introduction of high purity niobium on an industrial scale and, at the same time, by an improved understanding of the limiting processes in cavity performance, such as multipacting, field emission loading and thermal break-down. Multicell niobium cavities for beta = 1 particle acceleration, e.g. for the TESLA project, are routinely exceeding gradients of Eacc = 20 MV/m after the application of surface preparation techniques such as buffered chemical polishing or electropolishing, high pressure ultrapure water rinsing, UHV heat treatment and clean room assembly. The successes of the technology for beta = 1 accelerators has triggered a whole set of possible future applications for beta < 1 particle acceleration such as spallation neutron sources (SNS, ESS), transmutation of nuclear waste (TRASCO, ASH) or rare isotopes (RIA). The most advanced of these projects is SNS now under construction at Oak Ridge National Laboratory. This paper will review the technical solutions adopted to advance SRF technology and their impact on cavity performance, based on the SNS prototyping efforts. 2K at these high gradients are no longer out of reach. For the accelerator builder the challenge remains to come up with a good and reasonable design, which takes into account the status of the technology and does not over-estimate the achievable cavity performances in a large assembly such as, e.g., a multi-cavity cryo-module. In the following the criteria for multi-cell sc cavity design are reviewed and it is attempted to give a snapshot of the present status of multi-cell cavity performances

Status report on CERN activities aiming at the production of sputter-coated copper superconducting RF cavities for LEP

International Nuclear Information System (INIS)

Benvenuti, C.; Bloess, D.; Chiaveri, E.; Hilleret, N.; Minestrini, M.; Weingarten, W.

1990-01-01

To upgrade LEP energy above 55 GeV, the first step will consist in installing 32 SC cavities of 352 MHz frequency at Point 2 of the machine. This operation will be carried out in steps and should be completed by the end of 1991. It has been decided that 8 of the 32 cavities will be Nb coated copper cavities, the crucial part of which (i.e. the cavity proper) will be manufactured and coated at CERN. For the time being, 4 of these 8 cavities have been prepared. They present Q 0 values at low field of about 10 10 , while at the specified operating field of 5 MV/m their Q 0 range between 5 and 7 x 10 9 . In order to carry out assembly, coating and rinsing of cavities in better (i.e. cleaner) conditions, an experimental hall is being prepared, which will become operational after summer 1989, such as to be used for the manufacturing of the second batch of 4 coated cavities. In parallel with this main activity, some work is also being devoted to the study of coatings of higher T c materials, namely NbTiN. Due to the higher T c , these new coatings should present a lower BCS RF resistivity, a necessary condition to obtain higher Q 0 values. The first cavity coated so far with NbTiN (a single cell cavity of 500 MHz frequency) gave encouraging results, which however are not better than what was obtained with a Nb film. (author)

Cavity Control and Cooling of Nanoparticles in High Vacuum

Science.gov (United States)

Millen, James

2016-05-01

Levitated systems are a fascinating addition to the world of optically-controlled mechanical resonators. It is predicted that nanoparticles can be cooled to their c.o.m. ground state via the interaction with an optical cavity. By freeing the oscillator from clamping forces dissipation and decoherence is greatly reduced, leading to the potential to produce long-lived, macroscopically spread, mechanical quantum states, allowing tests of collapse models and any mass limit of quantum physics. Reaching the low pressures required to cavity-cool to the ground state has proved challenging. Our approach is to cavity cool a beam of nanoparticles in high vacuum. We can cool the c.o.m. motion of nanospheres, and control the rotation of nanorods, with the potential to produce cold, aligned nanostructures. Looking forward, we will utilize novel microcavities to enhance optomechanical cooling, preparing particles in a coherent beam ideally suited to ultra-high mass interferometry at 107 a.m.u.

Saliva in relation to dental erosion before and after radiotherapy

DEFF Research Database (Denmark)

Jensdottir, Thorbjorg; von Buchwald, Christian; Nauntofte, Birgitte

2013-01-01

Abstract Objective. Low saliva flow and abnormal saliva composition are common conditions after radiotherapy for oral cavity and pharyngeal cancer. Both conditions increase the susceptibility to dental caries and erosion, which may be further accelerated by changes in food preferences. The aim...... of this study was to determine changes in saliva flow and susceptibility to erosive challenges in pharyngeal cancer patients before and after radiotherapy to the head and neck. Materials and methods: The erosive potential of sucking acidic candies with and without calcium was determined in nine patients (50...

A Many-Atom Cavity QED System with Homogeneous Atom-Cavity Coupling

OpenAIRE

Lee, Jongmin; Vrijsen, Geert; Teper, Igor; Hosten, Onur; Kasevich, Mark A.

2013-01-01

We demonstrate a many-atom-cavity system with a high-finesse dual-wavelength standing wave cavity in which all participating rubidium atoms are nearly identically coupled to a 780-nm cavity mode. This homogeneous coupling is enforced by a one-dimensional optical lattice formed by the field of a 1560-nm cavity mode.

Segmented trapped vortex cavity

Science.gov (United States)

Grammel, Jr., Leonard Paul (Inventor); Pennekamp, David Lance (Inventor); Winslow, Jr., Ralph Henry (Inventor)

2010-01-01

An annular trapped vortex cavity assembly segment comprising includes a cavity forward wall, a cavity aft wall, and a cavity radially outer wall there between defining a cavity segment therein. A cavity opening extends between the forward and aft walls at a radially inner end of the assembly segment. Radially spaced apart pluralities of air injection first and second holes extend through the forward and aft walls respectively. The segment may include first and second expansion joint features at distal first and second ends respectively of the segment. The segment may include a forward subcomponent including the cavity forward wall attached to an aft subcomponent including the cavity aft wall. The forward and aft subcomponents include forward and aft portions of the cavity radially outer wall respectively. A ring of the segments may be circumferentially disposed about an axis to form an annular segmented vortex cavity assembly.

75 FR 33169 - Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation...