Evaluation of the fit of preformed nickel titanium arch wires on normal occlusion dental arches

Directory of Open Access Journals (Sweden)

Rakhn G. Al-Barakati

2016-01-01

Conclusions: Using an archwire form with the best fit to the dental arch should produce minimal changes in the dental arch form when NiTi wires are used and require less customization when stainless-steel wires are used.

Motion planning and synchronized control of the dental arch generator of the tooth-arrangement robot.

Science.gov (United States)

Jiang, Jin-Gang; Zhang, Yong-De

2013-03-01

The traditional, manual method of reproducing the dental arch form is prone to numerous random errors caused by human factors. The purpose of this study was to investigate the automatic acquisition of the dental arch and implement the motion planning and synchronized control of the dental arch generator of the multi-manipulator tooth-arrangement robot for use in full denture manufacture. First, the mathematical model of the dental arch generator was derived. Then the kinematics and control point position of the dental arch generator of the tooth arrangement robot were calculated and motion planning of each control point was analysed. A hardware control scheme is presented, based on the industrial personal computer and control card PC6401. In order to gain single-axis, precise control of the dental arch generator, we studied the control pulse realization of high-resolution timing. Real-time, closed-loop, synchronous control was applied to the dental arch generator. Experimental control of the dental arch generator and preliminary tooth arrangement were gained by using the multi-manipulator tooth-arrangement robotic system. The dental arch generator can automatically generate a dental arch to fit a patient according to the patient's arch parameters. Repeated positioning accuracy is 0.12 mm for the slipways that drive the dental arch generator. The maximum value of single-point error is 1.83 mm, while the arc-width direction (x axis) is -33.29 mm. A novel system that generates the dental arch has been developed. The traditional method of manually determining the dental arch may soon be replaced by a robot to assist in generating a more individual dental arch. The system can be used to fabricate full dentures and bend orthodontic wires. Copyright © 2012 John Wiley & Sons, Ltd.

Dental arch changes associated with rapid maxillary expansion: A retrospective model analysis study

Directory of Open Access Journals (Sweden)

Ivor M D′Souza

2015-01-01

Full Text Available Introduction: Transverse deficiency of the maxilla is a common clinical problem in orthodontics and dentofacial orthopedics. Transverse maxillary deficiency, isolated or associated with other dentofacial deformities, results in esthetic and functional impairment giving rise to several clinical manifestations such as asymmetrical facial growth, positional and functional mandibular deviations, altered dentofacial esthetics, adverse periodontal responses, unstable dental tipping, and other functional problems. Orthopedic maxillary expansion is the preferred treatment approach to increase the maxillary transverse dimension in young patients by splitting of the mid palatal suture. This orthopedic procedure has lately been subject of renewed interest in orthodontic treatment mechanics because of its potential for increasing arch perimeter to alleviate crowding in the maxillary arch without adversely affecting facial profile. Hence, the present investigation was conducted to establish a correlation between transverse expansion and changes in the arch perimeter, arch width and arch length. Methods: For this purpose, 10 subjects (five males, five females were selected who had been treated by rapid maxillary expansion (RME using hyrax rapid palatal expander followed by fixed mechanotherapy (PEA. Pretreatment (T1, postexpansion (T2, and posttreatment (T3 dental models were compared for dental changes brought about by RME treatment and its stability at the end of fixed mechanotherapy. After model measurements were made, the changes between T1-T2, T2-T3 and T1-T3 were determined for each patient. The mean difference between T1-T2, T2-T3 and T1-T3 were compared to assess the effects of RME on dental arch measurements. Results are expressed as mean ± standard deviation and are compared by repeated measures analysis of variance followed by a post-hoc test. Arch perimeter changes are correlated with changes in arch widths at the canine, premolar and molar

Morphological and Dimensional Characteristics of Dental Arch among Tribal and Non-tribal Population of Central India: A Comparative Study

Science.gov (United States)

Yadav, Naveen S; Saxena, Vrinda; Vyas, Rajesh; Sharma, Rohit; Sharva, Vijayta; Dwivedi, Ashish; Jain, Manish

2014-01-01

Background: Differences in the dental arch among Bhil Aboriginals were investigated and compared with non-tribal individuals residing in a tribal zone of Central India. Plaster models (120) were made with the help of alginate impression of tribal adults as well as non-tribal adults residing in the same area. The supposition as aboriginals being primitive due to dietary practices maxillary arch size and mandibular arch size is distended in comparison to the non-tribal population as adaptation of soft refined diet has disrupted the growth of the jaws. Hence, an attempt was made to evaluate the arch widths of tribal population and to associate it with non-tribe population in the same area of Central India. Materials and Methods: Difference in morphology and dimension of the maxillary and mandibular arches was aimed at Bhil tribes as well as non-tribal residents of tribe rich zone of Central India. The study was steered amid 120 individuals both tribal and non-tribe equally around 60 each through a well-organized out-reach program intermittently. Study models were made of dental arches of all participants. All measurements of the arch dimension were patent on the study casts using an electronic digital sliding caliper. Pair t-test was applied by using SPSS software version-19.0. Results: In the maxillary arch, on appraisal the non-tribal and Bhil tribe’s subjects, it showed a statistically significant difference in inter-incisor width (2.95 mm), inter-canine width (2.60 mm), arch depth (3.25 mm). While inter premolar width (0.20 mm) and inter molar width (0.80 mm) anterior arch length (0.60 mm), and posterior arch length (0.10 mm) showed statistically not significant difference between non-tribal population and Bhil tribe subjects. In the mandibular arch, it showed a statistically significant difference in inter-canine width (1.00 mm). Although, inter-incisor width (0.72 mm), inter-molar width (0.80 mm), arch depth (0.90 mm), anterior arch length (0.30 mm), posterior

MATHEMATICAL ANALYSIS OF DENTAL ARCH OF CHILDREN IN NORMAL OCCLUSION: A LITERATURE REVIEW

Directory of Open Access Journals (Sweden)

M. Abu-Hussein DDS, MScD, MSc, DPD

2012-03-01

Full Text Available AIM. This paper is an attempt to compare and analyze the various mathematical models for defining the dental arch curvature of children in normal occlusion based upon a review of available literature. Background. While various studies have touched upon ways to cure or prevent dental diseases and upon surgical ways for teeth reconstitution to correct teeth anomalies during childhood, a substantial literature also exists, attempting to mathematically define the dental arch of children in normal occlusion. This paper reviews these dental studies and compares them analytically. Method. The paper compares the different mathematical approaches, highlights the basic assumptions behind each model, underscores the relevancy and applicability of the same, and also lists applicable mathematical formulae. Results. Each model has been found applicable to specific research conditions, as a universal mathematical model for describing the human dental arch still eludes satisfactory definition. The models necessarily need to include the features of the dental arch, such as shape, spacing between teeth and symmetry or asymmetry, but they also need substantial improvement. Conclusions. While the paper shows that the existing models are inadequate in properly defining the human dental arch, it also acknowledges that future research based on modern imaging techniques and computeraided simulation could well succeed in deriving an allinclusive definition for the human dental curve till now eluding the experts.

[Effects of removable partial dentures on the quality of life in people with shortened dental arches].

Science.gov (United States)

Armellini, D B; Heydecke, G; Witter, D J; Creugers, N H J

2009-12-01

In order to assess the enhanced value of removable partial dentures on the quality of life, patients at 2 university clinics were screened for the presence of complete or shortened dental arches. Those selected were assigned to 1 of 5 subgroups: 1) a shortened dental arch with all frontal teeth, 2) a shortened dental arch with one or more frontal diastemas, 3) a shortened dental arch with all frontal teeth, restored by a removable partial denture, 4) a shortened dental arch and several diastemas, restored by a removable partial denture, 5) a complete dental arch. The participants completed the Oral Health Impact Profile (OHIP-49) and the Short Form Health Survey (SF-36). Clinical data recorded were: whether any teeth were missing and if so which, whether or not these had been replaced by a removable partial denture, and the number of occluding pairs of (pre)molars. The results revealed that a shortenend dental arch has a certain impact on the quality of life. However, the participants only experienced benefits from a removable partial denture if the denture also replaced frontal teeth.

Shape model of the maxillary dental arch using Fourier descriptors with an application in the rehabilitation for edentulous patient.

Science.gov (United States)

Rijal, Omar M; Abdullah, Norli A; Isa, Zakiah M; Noor, Norliza M; Tawfiq, Omar F

2013-01-01

The knowledge of teeth positions on the maxillary arch is useful in the rehabilitation of the edentulous patient. A combination of angular (θ), and linear (l) variables representing position of four teeth were initially proposed as the shape descriptor of the maxillary dental arch. Three categories of shape were established, each having a multivariate normal distribution. It may be argued that 4 selected teeth on the standardized digital images of the dental casts could be considered as insufficient with respect to representing shape. However, increasing the number of points would create problems with dimensions and proof of existence of the multivariate normal distribution is extremely difficult. This study investigates the ability of Fourier descriptors (FD) using all maxillary teeth to find alternative shape models. Eight FD terms were sufficient to represent 21 points on the arch. Using these 8 FD terms as an alternative shape descriptor, three categories of shape were verified, each category having the complex normal distribution.

Influence of posterior dental arch length on brain activity during chewing in patients with mandibular distal extension removable partial dentures.

Science.gov (United States)

Shoi, K; Fueki, K; Usui, N; Taira, M; Wakabayashi, N

2014-07-01

It is well known that shortened dental arch decreases masticatory function. However, its potential to change brain activity during mastication is unknown. The present study investigates the effect of a shortened posterior dental arch with mandibular removable partial dentures (RPDs) on brain activity during gum chewing. Eleven subjects with missing mandibular molars (mean age, 66.1 years) on both sides received experimental RPDs with interchangeable artificial molars in a crossover trial design. Brain activity during gum chewing with RPDs containing (full dental arch) and lacking artificial molars (shortened dental arch) was measured using functional magnetic resonance imaging. Additionally, masticatory function was evaluated for each dental arch type. Food comminuting and mixing ability and the perceived chewing ability were significantly lower in subjects with a shortened dental arch than those with a full dental arch (P chewing with the full dental arch occurred in the middle frontal gyrus, primary sensorimotor cortex extending to the pre-central gyrus, supplementary motor area, putamen, insula and cerebellum. However, middle frontal gyrus activation was not observed during gum chewing with the shortened dental arch. These results suggest that shortened dental arch affects human brain activity in the middle frontal gyrus during gum chewing, and the decreased middle frontal gyrus activation may be associated with decreased masticatory function. © 2014 John Wiley & Sons Ltd.

One-stage closure of isolated cleft palate with the Veau-Wardill-Kilner V to Y pushback procedure or the Cronin modification. II. Height, weight and comparison of dental arches.

Science.gov (United States)

Heliövaara, A; Pere, A; Ranta, R

1994-03-01

The body height and weight, and sizes of dental arches in 116 patients with isolated cleft palate were evaluated at 16.9-20.6 years of age. One-stage closure of the soft and hard palate had been done at a mean age of 1.8 years using the Veau-Wardill-Kilner or the Cronin mucoperiosteal palatal V-Y pushback technique. The height attained in both the boys (177.6 cm) and the girls (165.7 cm) was similar to that in the general adult population, even though half of the boys had not reached their final height. The median relative weight for height and sex was 6%. There were no significant differences in dental arch measurements depending on the method of operation but the more palatal operations done the shorter the maxillary and mandibular dental arch widths. The extent of cleft made a significant difference, larger clefts having narrower palatal intercanine widths. Dental arch dimensions were consistently larger in boys than in girls.

Masticatory Efficiency of Shortened Dental Arch Subjects with ...

African Journals Online (AJOL)

2017-05-16

May 16, 2017 ... of shortened dental arch subjects with removable partial denture: A comparative ... at the post- and pre-treatment phases was statistically significant (P = 0.001). The .... after the delivery of metal-based RPD with the denture in.

Retrospective analysis of 56 edentulous dental arches restored with 344 single-stage implants using an immediate loading fixed provisional protocol: statistical predictors of implant failure.

Science.gov (United States)

Kinsel, Richard P; Liss, Mindy

2007-01-01

The purpose of this retrospective study was to evaluate the effects of implant dimensions, surface treatment, location in the dental arch, numbers of supporting implant abutments, surgical technique, and generally recognized risk factors on the survival of a series of single-stage Straumann dental implants placed into edentulous arches using an immediate loading protocol. Each patient received between 4 and 18 implants in one or both dental arches. Periapical radiographs were obtained over a 2- to 10-year follow-up period to evaluate crestal bone loss following insertion of the definitive metal-ceramic fixed prostheses. Univariate tests for failure rates as a function of age ( or = 60 years), gender, smoking, bone grafting, dental arch, surface type, anterior versus posterior, number of implants per arch, and surgical technique were made using Fisher exact tests. The Cochran-Armitage test for trend was used to evaluate the presence of a linear trend in failure rates regarding implant length and implant diameter. Logistic regression modeling was used to determine which, if any, of the aforementioned factors would predict patient and implant failure. A significance criterion of P = .05 was utilized. Data were collected for 344 single-stage implants placed into 56 edentulous arches (39 maxillae and 17 mandibles) of 43 patients and immediately loaded with a 1-piece provisional fixed prosthesis. A total of 16 implants failed to successfully integrate, for a survival rate of 95.3%. Increased rates of failure were associated with reduced implant length, placement in the posterior region of the jaw, increased implant diameter, and surface treatment. Implant length emerged as the sole significant predictor of implant failure. In this retrospective analysis of 56 consecutively treated edentulous arches with multiple single-stage dental implants loaded immediately, reduced implant length was the sole significant predictor of failure.

Decayed/missing/filled teeth and shortened dental arches in Tanzanian adults.

NARCIS (Netherlands)

Sarita, P.T.N.; Witter, D.J.; Kreulen, C.M.; Matee, M.I.N.; Hof, M.A. van 't; Creugers, N.H.J.

2004-01-01

PURPOSE: This study assessed decayed/missing/filled teeth (DMFT), presence of occlusal units, and prevalence of shortened dental arches in a Tanzanian adult population. MATERIALS AND METHODS: The dental state of samples of the Tanzanian population was studied. Oral examinations were conducted on

Mandibulary dental arch form differences between level four polynomial method and pentamorphic pattern for normal occlusion sample

Directory of Open Access Journals (Sweden)

Y. Yuliana

2011-07-01

Full Text Available The aim of an orthodontic treatment is to achieve aesthetic, dental health and the surrounding tissues, occlusal functional relationship, and stability. The success of an orthodontic treatment is influenced by many factors, such as diagnosis and treatment plan. In order to do a diagnosis and a treatment plan, medical record, clinical examination, radiographic examination, extra oral and intra oral photos, as well as study model analysis are needed. The purpose of this study was to evaluate the differences in dental arch form between level four polynomial and pentamorphic arch form and to determine which one is best suitable for normal occlusion sample. This analytic comparative study was conducted at Faculty of Dentistry Universitas Padjadjaran on 13 models by comparing the dental arch form using the level four polynomial method based on mathematical calculations, the pattern of the pentamorphic arch and mandibular normal occlusion as a control. The results obtained were tested using statistical analysis T student test. The results indicate a significant difference both in the form of level four polynomial method and pentamorphic arch form when compared with mandibular normal occlusion dental arch form. Level four polynomial fits better, compare to pentamorphic arch form.

Association between breastfeeding duration, non-nutritive sucking habits and dental arch dimensions in deciduous dentition: a cross-sectional study

OpenAIRE

Agarwal, Shiv Shankar; Nehra, Karan; Sharma, Mohit; Jayan, Balakrishna; Poonia, Anish; Bhattal, Hiteshwar

2014-01-01

Background This cross-sectional retrospective study was conducted to determine association between breastfeeding duration, non-nutritive sucking habits, dental arch transverse diameters, posterior crossbite and anterior open bite in deciduous dentition. Methods 415 children (228 males and 187 females), 4 to 6 years old, from a mixed Indian population were clinically examined. Based on written questionnaire answered by parents, children were divided into two groups: group 1 (breastfed for

Evaluation of dental arch relationship of patients with unilateral cleft lip and palate

Directory of Open Access Journals (Sweden)

Anjuman Preet Kaur Dua

2016-01-01

Full Text Available Background: Several classifications have previously been described to assess dental arch relationships of cleft patients and therefore the surgical outcome. The most commonly used method for evaluation of surgical outcome is Goslon Yardstick. Another scoring system that can be used is the modified Huddart/Bodenham scoring system. Aim: The objective of this study was to evaluate the dental arch relationships of subjects with repaired unilateral and cleft lip and palate who come at an orthodontic center by means of Goslon and modified Huddart/Bodenham scoring system and to find a correlation between the two systems. Methodology: The study models of 16 patients (9 males, 7 females with an average age of 14.2 years (range 11–23 years were evaluated for arch constriction by four observers which included two orthodontists and two postgraduate students. Results: The analysis of dental arch relationship using Goslon Yardstick revealed that 63% of patients ranked between Goslon 3 and 5. The mean modified Huddart/Bodenham score was −16.13. Conclusion: The study revealed that modified Huddart/Bodenham scoring system provided better interobserver agreement than Goslon Yardstick by untrained observers. There was a good inverse correlation between two scoring systems.

Masticatory efficiency of shortened dental arch subjects with ...

African Journals Online (AJOL)

Objective: The objective of this study was to compare the masticatory efficiency in subjects with shortened dental arch (SDA) before and after restoration with removable partial denture (RPD). Materials and Methods: This was a prospective study carried out on 36 consecutive patients. The subjects were asked to chew 5 g of ...

Alignment Strategy for Constricted Maxillary Dental Arch in Patients With Unilateral Cleft Lip and Palate Using Fixed Orthodontic Appliance.

Science.gov (United States)

Park, Yoon-Hee; Park, Sumin; Baek, Seung-Hak

2018-03-01

The purpose of this study was to compare the alignment pattern of the constricted maxillary dental arch by fixed orthodontic treatment (FOT) in the well-aligned and constricted arches of unilateral cleft lip and palate (UCLP) patients. 19 UCLP patients were divided into Group 1 (well-aligned arch, n = 9) and Group 2 (constricted arch, n = 10). After the cephalometric and maxillary dental arch variables before (T1) and after FOT (T2) were measured, statistical analysis was performed. There were no significant differences in the surgical timing of cheiloplasty, palatoplasty, and secondary alveolar bone grafting and in the surgical method of cheiloplasty between the 2 groups. However, Group 2 had a higher percentage of palatoplasty method, which could leave the denuded bone for secondary healing than Group 1 (P dental arch compared to Group 1 at the T1 stage (inter-second premolar width, greater segment angle [GSA], and lesser segment angle [LSA], all P dental arch shape, different strategy is necessary to obtain proper alignment by FOT.

Evaluation of maxillary arch morphology in children with unilaterally impacted incisors via three-dimensional analysis of digital dental casts: a controlled study.

Science.gov (United States)

Pavoni, Chiara; Franchi, Lorenzo; Buongiorno, Marco; Cozza, Paola

2016-01-01

The purpose of this work was to analyze variations in maxillary arch dimensions in subjects presenting unilaterally impacted maxillary permanent central incisors compared with a control group of subjects without eruption anomalies. A group of 23 Caucasian children [8 females and 15 males, mean age 9.7 years, standard deviation (SD) 1.6 years] displaying unilaterally impacted maxillary permanent central incisors (impacted incisor group: IIG) were compared with a control group (CG) of 23 subjects (9 females; 14 males, mean age 8.8 years, SD 1.9 years) presenting no eruption disorders. Pretreatment dental casts were taken from each subject and the upper arch was scanned using a three-dimensional scanner. Linear measurements were taken on each digital model to analyze maxillary arch dimensions. Significant between-group differences were tested with the Student's t test (p < 0.05). The transverse and sagittal upper-arch measurements were significantly smaller in the IIG than in the CG. In particular, the anterior arch was 1.35 mm shorter in the IIG, while intercanine width was decreased by 2.51 mm on the impacted side. Children revealing unilaterally impacted maxillary central incisors demonstrated a significantly constricted maxillary transverse width and shorter arch on the impacted side compared with subjects with no eruption disorders.

Knowledge and attitudes of dentists toward shortened dental arch ...

African Journals Online (AJOL)

Objective: The aim of this study was to assess and compare the knowledge and attitudes of dentists toward shortened dental arch (SDA) therapy in Saudi Arabia. Materials and Methods: In this cross‑sectional study, self‑designed‑structured questionnaires were distributed among specialists (SP), residents (RES), and ...

Tooth angulation and dental arch perimeter-the effect of orthodontic bracket prescription.

Science.gov (United States)

Pontes, Luana F; Cecim, Rodolpho L; Machado, Sissy M; Normando, David

2015-08-01

The aim of this study was to evaluate the effects of upper incisors and canine angulations introduced by different bracket prescriptions on dental arch perimeter. Cone beam computerized tomography scans collected using I-Cat (Imaging Sciences International, Hatfield, PA, USA) were selected conveniently from a database of routine exams of a clinical radiology center. Crown and radicular measurements of upper incisors and canines were made and exported to the Autocad 2011 software to create a virtual dental model. The virtual teeth were positioned with an angulation of zero; thereafter, a reference value for the perimeter of the arch was measured. Furthermore, teeth angulations were applied according to the standards of the Edgewise bracket system and the Straight-wire systems: MBT, Capelozza, Andrews, and Roth. The largest linear distances for tooth crown (anterior arch perimeter) and root (radicular distance) were obtained for each bracket prescription. The anterior perimeter for well-aligned incisors and canines without angulation was used as reference (crown: 47.34mm; root: 39.13mm). An increase in the arch perimeter was obtained for all bracket prescriptions evaluated, which ranged from 0.28 and 3.19mm in the Edgewise technique, for the crown and root measurements, respectively, to 1.09 and 11.28mm for the Roth prescription. Bracket prescriptions with greater angulation led to an increased use of space within the dental arch, mainly in the radicular region. The consequence of this radicular angular displacement will need to be further investigated. © The Author 2014. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Intraoral gothic arch tracing.

Science.gov (United States)

Rubel, Barry; Hill, Edward E

2011-01-01

In order to create optimum esthetics, function and phonetics in complete denture fabrication, it is necessary to record accurate maxillo-mandibular determinants of occlusion. This requires clinical skill to establish an accurate, verifiable and reproducible vertical dimension of occlusion (VDO) and centric relation (CR). Correct vertical relation depends upon a consideration of several factors, including muscle tone, inter-dental arch space and parallelism of the ridges. Any errors made while taking maxillo-mandibular jaw relation records will result in dentures that are uncomfortable and, possibly, unwearable. The application of a tracing mechanism such as the Gothic arch tracer (a central bearing device) is a demonstrable method of determining centric relation. Intraoral Gothic arch tracers provide the advantage of capturing VDO and CR in an easy-to-use technique for practitioners. Intraoral tracing (Gothic arch tracing) is a preferred method of obtaining consistent positions of the mandible in motion (retrusive, protrusive and lateral) at a comfortable VDO.

Three-dimensional dental arch changes of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusion

OpenAIRE

Peixoto,Adriano Porto; Pinto,Ary dos Santos; Garib,Daniela Gamba; Gonçalves,João Roberto

2014-01-01

INTRODUCTION: This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. METHODS: Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. RESULTS: During orthodontic preparation, the m...

Effects of Asthma and Inhalation corticosteroids on the dental arch morphology in children

Directory of Open Access Journals (Sweden)

S S Kumar

2012-01-01

Full Text Available Background: Hereditary, environmental and developmental factors play an important role in dentofacial development, as well as the initiation of malocclusion disorder. Allergic phenomenon such as asthma that induces an alternative mode of breathing in patients is a contributing factor in development of the dental arch. Aim: Our aim in this study was to evaluate the dentoalveolar morphology in asthmatic children and to analyze the effects of asthmatic medications on the dental arch. Setting and Design : This study is centered on 44 asthmatic children aged between 6-12 years from J.S.S Hospital, Mysore. Selected variables from model analysis of the casts of the asthmatic group were subjected to comparison with those of the non-asthmatic group, which comprised of 44 non-asthmatic children. Selected parameters were arch width, arch length and palatal depth. Materials and Methods : Impressions of upper and lower arches were made with rubber based impression material. A sliding digital caliper was used to measure the casts for arch width and arch length. A palatal depth gauge was used to measure the palatal depth. Statistical Analysis : Differences in arch widths, arch lengths and palatal depths between asthmatics and non-asthmatics groups were evaluated by independent sample t-tests. Chi-square test was applied to assess the frequency of occurrence of malocclusion in the asthmatic children. Result: The results obtained revealed that the arch length and palatal depth of asthmatic group had higher values compared to that of non-asthmatic groups for both age groups (6 to 8-year-old males and females, 10 to 12-year-old males and females. Inter molar width showed a significant lower value in asthmatics in the maxillary arches of 10 to 12-year-old females. Fifty percent of the asthmatic children aged 10 to 12-years had open-bite. Children under regular medication showed significant deviation in the dentoalveolar morphology as compared to those under

Speech evaluation and dental arch shape following pushback palatoplasty in cleft palate patients: Supraperiosteal flap technique versus mucoperiosteal flap technique.

Science.gov (United States)

Ito, Shizuyo; Noguchi, Makoto; Suda, Yoshiyuki; Yamaguchi, Akira; Kohama, Geniku; Yamamoto, Etsuhide

2006-04-01

The aim of this study was to evaluate and compare the maxillary dental arch shape and speech of cleft palate patients following pushback palatoplasty using either the supraperiosteal flap technique or the mucoperiosteal flap technique. Sixty-two patients (29, cleft palate only; 33, unilateral cleft lip, alveolus and palate) operated on by the supraperiosteal technique and 47 patients (23, cleft palate only; 24 unilateral cleft lip, alveolus and palate) by the mucoperiosteal technique were reviewed in this study. Dental arch shape and speech proficiency at preschool and school age were evaluated in all patients. Dental arch shapes were classified as U type (good dental arch shape) and V type (narrow dental arch shape). In cleft palate only patients, U type was observed in 90% of the supraperiosteal group and 83% of the mucoperiosteal group. In unilateral cleft lip, alveolus and palate patients, U type was observed in 85% of the supraperiosteal group, while only in 33% of the mucoperiosteal group. In cleft palate only patients, normal speech at school age was observed 100% of the supraperiosteal group and 83% of the mucoperiosteal group. In unilateral cleft lip, alveolus and palate patients, normal speech at school age was observed in 97% of the supraperiosteal group and 75% of the mucoperiosteal group. Misarticulation was frequently found in patients with the V type of dental arch shape. It is suggested that pushback palatoplasty using the supraperiosteal technique is more advantageous for speech development compared with the mucoperiosteal technique.

Treatment planning for patients with dental arch asymmetry caused by loss of a premolar on one side of the mouth

Directory of Open Access Journals (Sweden)

Ivanova О.P.

2013-09-01

Full Text Available The objective of this study is to determine a selection criterion that is applicable for the treatment of patients with dental arch asymmetry caused by loss of a premolar on one side of the mouth. Material and methods. Fifty-seven patients (first maturity level who had some teeth extracted for orthodontic treatment were included in the study. The patients were divided into basic and control groups. We proposed to shape the extraction socket immediately after the extraction of a permanent tooth. In the basic group the extraction sockets were filled with osteoplastic material. Patients in the control group refused any surgical interventions. Results. According to a given criterion, the correlation between tooth size and dental arch parameters has been determined. When applying this criterion for finding the correlation, the frontal distal diagonal size of the dental arch was multiplied by 1.14 coefficient. The sum of the mesiodistal diameters of seven teeth in the half-arc was subtracted from the obtained value. The value which was equal to 0±1.0mm indicated the correlation between tooth size and dental arch parameters. Conclusion. If there is a correlation between tooth size and dental arch parameters, it is advisable to provide treatment associated with having the post-extraction socket opened and implant therapy performed (most commonly with the use of intraosseous dental implants.

Effect of dental arch convexity and type of archwire on frictional forces

NARCIS (Netherlands)

Fourie, Zacharias; Ozcan, Mutlu; Sandham, John

Introduction: Friction measurements in orthodontics are often derived from models by using brackets placed on flat models with various straight wires. Dental arches are convex in some areas. The objectives of this study were to compare the frictional forces generated in conventional flat and convex

Maxillary Arch Dimensions and Spectral Characteristics of Children with Cleft Lip and Palate Who Produce Middorsum Palatal Stops

Science.gov (United States)

Zajac, David J.; Cevidanes, Lucia; Shah, Sonam; Haley, Katarina L.

2012-01-01

Purpose: The purpose of this study was twofold: (a) to determine maxillary arch dimensions of children with repaired cleft lip and palate (CLP) who produced middorsum palatal stops and (b) to describe some spectral characteristics of middorsum palatal stops. Method: Maxillary arch width, length, and height dimensions and first spectral moments of…

Accuracy of complete-arch dental impressions: a new method of measuring trueness and precision.

Science.gov (United States)

Ender, Andreas; Mehl, Albert

2013-02-01

A new approach to both 3-dimensional (3D) trueness and precision is necessary to assess the accuracy of intraoral digital impressions and compare them to conventionally acquired impressions. The purpose of this in vitro study was to evaluate whether a new reference scanner is capable of measuring conventional and digital intraoral complete-arch impressions for 3D accuracy. A steel reference dentate model was fabricated and measured with a reference scanner (digital reference model). Conventional impressions were made from the reference model, poured with Type IV dental stone, scanned with the reference scanner, and exported as digital models. Additionally, digital impressions of the reference model were made and the digital models were exported. Precision was measured by superimposing the digital models within each group. Superimposing the digital models on the digital reference model assessed the trueness of each impression method. Statistical significance was assessed with an independent sample t test (α=.05). The reference scanner delivered high accuracy over the entire dental arch with a precision of 1.6 ±0.6 µm and a trueness of 5.3 ±1.1 µm. Conventional impressions showed significantly higher precision (12.5 ±2.5 µm) and trueness values (20.4 ±2.2 µm) with small deviations in the second molar region (PDigital impressions were significantly less accurate with a precision of 32.4 ±9.6 µm and a trueness of 58.6 ±15.8µm (Pdigital models were visible across the entire dental arch. The new reference scanner is capable of measuring the precision and trueness of both digital and conventional complete-arch impressions. The digital impression is less accurate and shows a different pattern of deviation than the conventional impression. Copyright © 2013 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Association between breastfeeding duration, non-nutritive sucking habits and dental arch dimensions in deciduous dentition: a cross-sectional study.

Science.gov (United States)

Agarwal, Shiv Shankar; Nehra, Karan; Sharma, Mohit; Jayan, Balakrishna; Poonia, Anish; Bhattal, Hiteshwar

2014-10-31

This cross-sectional retrospective study was conducted to determine association between breastfeeding duration, non-nutritive sucking habits, dental arch transverse diameters, posterior crossbite and anterior open bite in deciduous dentition. 415 children (228 males and 187 females), 4 to 6 years old, from a mixed Indian population were clinically examined. Based on written questionnaire answered by parents, children were divided into two groups: group 1 (breastfed for anterior open bite did not differ significantly between the two groups (P = 0.865). The distribution of posterior crossbite was significantly different between the two groups (P = 0.001). OR assessment (OR = 1.852) revealed that group 1 had almost twofold higher prevalence of NNS habits than group 2. Multivariate logistic regression analysis revealed that the first group had independently fourfold increased risk of developing crossbite compared to the second group (OR = 4.3). Multivariate linear regression analysis also revealed that age and breastfeeding duration were the most significant determinants of ICD and IMD. An increased prevalence of NNS in the first group suggests that NNS is a dominant variable in the association between breastfeeding duration and reduced intra-arch transverse diameters which leads to increased prevalence of posterior crossbites as seen in our study. Mandibular inter-canine width is however unaffected due to a lowered tongue posture seen in these children.

[A new method to orthodontically correct dental occlusal plane canting: wave-shaped arch].

Science.gov (United States)

Zheng, X; Hu, X X; Ma, N; Chen, X H

2017-02-18

To introduce a technique of second order wave-shaped arch wire to orthodontically treat dental occlusal plane canting (DOPC) with left-right interactive anchorage, and to test its clinical efficacy. Among the permanent dentition malocclusion patients who showed no obvious facial asymmetry, we screened for patients who showed anterior occlusal plane canting (AOPC) after routine orthodontic examination, treatment planning, MBT fixed appliance installation and serial arch wires alignment. Each patient had been clinically appraised in frontal view by 2 orthodontists and the patient him/herself; if all 3 agreed that the AOPC was obvious, the patient was included. By this means, we included 37 patients, including 10 males and 27 females; the average age was (21.9±5.2) years. To correct AOPC, opposite direction equal curvature second order rocking-chair curve was bent on each side of 0.46 mm×0.56 mm stainless steel edgewise wire. With reference to normal occlusal plane, a curve toward the occlusal surface was made to extrude under-erupted teeth on one side while a curve toward the gingiva was made to intrude over-erupted teeth on the other side, so that the arch wire was made into a wave shape in vertical dimension. Before and after application of wave-shaped arch wire, frontal facial photographs were taken when the patient's mouth was open slightly with lips retracted to show anterior occlusal plane (AOP) clearly. An AOP was constructed by connecting the center of the slot in the medial edge of canine bracket on each side in the photograph. The angles between the bipupillary plane(BPP) and the constructed AOP were measured in ImageJ1-48v software and the angle differences before and after treatment were compared with paired Wilcoxon test in SPSS 10.0 software. The wave-shaped arch could correct AOPC effectively in 3 to 10 months time with an average of 5.5±1.7 months; the angles between AOP and BBP before treatment ranged from 2.90° to 6.12° with a median of 4.01�

Mechanical equilibrium of forces and moments applied on orthodontic brackets of a dental arch: Correlation with literature data on two and three adjacent teeth.

Science.gov (United States)

Wagner, Delphine; Bolender, Yves; Rémond, Yves; George, Daniel

2017-01-01

Although orthodontics have greatly improved over the years, understanding of its associated biomechanics remains incomplete and is mainly based on two dimensional (2D) mechanical equilibrium and long-time clinical experience. Little experimental information exists in three dimensions (3D) about the forces and moments developed on orthodontic brackets over more than two or three adjacent teeth. We define here a simplified methodology to quantify 3D forces and moments applied on orthodontic brackets fixed on a dental arch and validate our methodology using existing results from the literature by means of simplified hypotheses.

[Effect of removable partial dentures restoration on oral health-related quality of life of patients with shortened dental arch].

Science.gov (United States)

Fu, Zhen-nan; Lin, Xue-feng

2013-11-01

To assess the effect of removable partial dentures (PRD) restoration on oral health-related quality of life (OHRQOL) of subjects with shortened dental arches (SDA) using the Chinese version of the Oral Health Impact Profile (OHIP-14). Consecutive patients with shortened dental arches were recruited from the Department of Prosthodontics, Foshan Chancheng Hospital of Stomatology. The Chinese version of OHIP-14 was administered to each subject before treatment and after treatment. The subjective outcomes of removable partial dentures therapy on SDA were collected and the pre- and post-treatment scores of the Chinese version of OHIP-14 were compared. After treatment, significant decrease in patients' total score of OHRQOL [before: 9 (6, 12) ; after: 4 (2.25, 6)] was detected, as well as physical pain subscale, physical disability subscale and handicap subscale; and the score of OHRQOL in function limitation subscale increased [before: 0(0,0); after: 2(1, 2)]. The main impacts of shortened dental arch with intact anterior region affecting patients' OHRQOL are physical disability.From a quality-of-life perspective, patients with SDA can perceive benefits from RPD.

Long-term follow-up indicates unimpaired oral health-related quality of life for people having shortened dental arches

NARCIS (Netherlands)

Gerritsen, A.E.; Witter, D.J.; Creugers, N.H.J.

2017-01-01

OBJECTIVES: To assess and analyse OHRQoL of people with shortened dental arches (SDA) in a long-term cohort study. METHODS: All participants of a long-term cohort study on SDA who were still attending the university dental clinic and still had an SDA (SDA group) with 3-5 posterior occluding pairs

Dental arch relationship in children with complete unilateral cleft lip and palate following Warsaw (one-stage repair) and Oslo protocols.

Science.gov (United States)

Fudalej, Piotr; Hortis-Dzierzbicka, Maria; Dudkiewicz, Zofia; Semb, Gunvor

2009-11-01

To compare the dental arch relationship following one-stage repair of unilateral cleft lip and palate (UCLP) in Warsaw with a matched sample of patients treated by the Oslo Cleft Team. Study models of 61 children (mean age, 11.2; SD, 1.7) with a nonsyndromic complete UCLP consecutively treated with one-stage closure of the cleft at 9.2 months (range, 6.0 to 15.8 months; SD, 2.0) by the Warsaw Cleft Team at the Institute of Mother and Child, Poland, were compared with a sample drawn from a consecutive series of patients with UCLP treated by the Oslo Cleft Team and matched for age, gender, and soft tissue band. The study models were given random numbers to blind their origin. Four examiners rated the dental arch relationship using the GOSLON Yardstick. The strength of agreement of rating was assessed with weighted Kappa statistics. An independent t-test was carried out to compare the GOSLON scores between Warsaw and Oslo samples, and Fisher's exact tests were performed to evaluate the difference of distribution of the GOSLON scores. The intrarater and interrater agreements were high (K > or = .800). No difference in dental arch relationship between Warsaw and Oslo groups was found (mean GOSLON score = 2.68 and 2.65 for Warsaw and Oslo samples, respectively). The distribution of the GOSLON grades was similar in both groups. The dental arch relationship following one-stage repair (Warsaw protocol) was comparable with the outcome of the Oslo Cleft Team's protocol.

Miniscrew-assisted rapid palatal expansion for managing arch perimeter in an adult patient

Directory of Open Access Journals (Sweden)

Amanda Carneiro da Cunha

Full Text Available ABSTRACT Introduction: Etiology of dental crowding may be related to arch constriction in diverse dimensions, and an appropriate manipulation of arch perimeter by intervening in basal bone discrepancies cases, may be a key for crowding relief, especially when incisors movement is limited due to underlying pathology, periodontal issues or restrictions related to soft tissue profile. Objectives: This case report illustrates a 24-year old woman, with maxillary transverse deficiency, upper and lower arches crowding, Class II, division 1, subdivision right relationship, previous upper incisors traumatic episode and straight profile. A non-surgical and non-extraction treatment approach was feasible due to the miniscrew-assisted rapid palatal expansion technique (MARPE. Methods: The MARPE appliance consisted of a conventional Hyrax expander supported by four orthodontic miniscrews. A slow expansion protocol was adopted, with an overall of 40 days of activation and a 3-month retention period. Intrusive traction miniscrew-anchored mechanics were used for correcting the Class II subdivision relationship, managing lower arch perimeter and midline deviation before including the upper central incisors. Results: Post-treatment records show an intermolar width increase of 5 mm, bilateral Class I molar and canine relationships, upper and lower crowding resolution, coincident dental midlines and proper intercuspation. Conclusions: The MARPE is an effective treatment approach for managing arch-perimeter deficiencies related to maxillary transverse discrepancies in adult patients.

Human evaluation in association to the mathematical analysis of arch forms: Two-dimensional study.

Science.gov (United States)

Zabidin, Nurwahidah; Mohamed, Alizae Marny; Zaharim, Azami; Marizan Nor, Murshida; Rosli, Tanti Irawati

2018-03-01

To evaluate the relationship between human evaluation of the dental-arch form, to complete a mathematical analysis via two different methods in quantifying the arch form, and to establish agreement with the fourth-order polynomial equation. This study included 64 sets of digitised maxilla and mandible dental casts obtained from a sample of dental arch with normal occlusion. For human evaluation, a convenient sample of orthodontic practitioners ranked the photo images of dental cast from the most tapered to the less tapered (square). In the mathematical analysis, dental arches were interpolated using the fourth-order polynomial equation with millimetric acetate paper and AutoCAD software. Finally, the relations between human evaluation and mathematical objective analyses were evaluated. Human evaluations were found to be generally in agreement, but only at the extremes of tapered and square arch forms; this indicated general human error and observer bias. The two methods used to plot the arch form were comparable. The use of fourth-order polynomial equation may be facilitative in obtaining a smooth curve, which can produce a template for individual arch that represents all potential tooth positions for the dental arch. Copyright © 2018 CEO. Published by Elsevier Masson SAS. All rights reserved.

[Dysfunctional pathology from "true" and "de facto" mutilation of the dental arches].

Science.gov (United States)

Garino, G B; Capurso, U

1989-01-01

The mutilations of the dental arches for agenesia, extractions or trauma and because of ankylosis, caries can be the cause of the disorders of the stomatognatic system. These problems are in relation with the time of the disfunction, the skeletal type and the interarches relationship. The pathogenetic factors are secondary to the amount and the direction of the dislocations or the entrapment of the lower jaw. The treatment planning can provide the closure of the spaces or the reopening. These procedures are demonstrated by two treated cases with TMJ disorders.

Mastication in subjects with extremely shortened dental arches rehabilitated with removable partial dentures.

Science.gov (United States)

Arce-Tumbay, Jackelyn; Sanchez-Ayala, Alfonso; Sotto-Maior, Bruno Salles; Senna, Plinio Mendes; Campanha, Nara Hellen

2011-01-01

Mastication was evaluated in subjects presenting extremely shortened dental arches (ESDAs) rehabilitated with mandibular free-end removable partial dentures (RPDs). Subjects were divided into four groups (n = 10): those with a complete dentition, those with ESDAs, and those with ESDAs who were rehabilitated with an RPD, who were evaluated both with and without their prostheses. Mastication was measured through masticatory performance, time, and ability. RPD wearers showed higher masticatory performance (P mastication in ESDA subjects but without achieving normal mastication levels.

In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions.

Science.gov (United States)

Ender, Andreas; Attin, Thomas; Mehl, Albert

2016-03-01

Digital impression systems have undergone significant development in recent years, but few studies have investigated the accuracy of the technique in vivo, particularly compared with conventional impression techniques. The purpose of this in vivo study was to investigate the precision of conventional and digital methods for complete-arch impressions. Complete-arch impressions were obtained using 5 conventional (polyether, POE; vinylsiloxanether, VSE; direct scannable vinylsiloxanether, VSES; digitized scannable vinylsiloxanether, VSES-D; and irreversible hydrocolloid, ALG) and 7 digital (CEREC Bluecam, CER; CEREC Omnicam, OC; Cadent iTero, ITE; Lava COS, LAV; Lava True Definition Scanner, T-Def; 3Shape Trios, TRI; and 3Shape Trios Color, TRC) techniques. Impressions were made 3 times each in 5 participants (N=15). The impressions were then compared within and between the test groups. The cast surfaces were measured point-to-point using the signed nearest neighbor method. Precision was calculated from the (90%-10%)/2 percentile value. The precision ranged from 12.3 μm (VSE) to 167.2 μm (ALG), with the highest precision in the VSE and VSES groups. The deviation pattern varied distinctly according to the impression method. Conventional impressions showed the highest accuracy across the complete dental arch in all groups, except for the ALG group. Conventional and digital impression methods differ significantly in the complete-arch accuracy. Digital impression systems had higher local deviations within the complete arch cast; however, they achieve equal and higher precision than some conventional impression materials. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Finishing procedures in Orthodontics: dental dimensions and proportions (microesthetics

Directory of Open Access Journals (Sweden)

Roberto Carlos Bodart Brandão

2013-10-01

Full Text Available OBJECTIVE: The objective of the present article is to describe procedures that can be performed to achieve excellence in orthodontic treatment finishing. The content is limited to microesthetics, which comprises the concept of ideal dental dimensions and proportions (white esthetics and its correlation with the periodontium (pink esthetics. Standards of normality are described both in their real dimensions (dental height and width, and in those effectively perceived by the observer, the virtual dimensions. METHODS: The best scientific evidence was sought in the literature to support the clinical procedures that must guide the professional to obtain maximum esthetic quality on their treatments. Therefore, it is necessary to investigate what the other specialties in Dentistry expect from Orthodontics and, specially, what they have to offer. Clinical cases will be used to illustrate the dental movement that might maximize treatment outcome and to confront the ideal standards with the current state of the art. CONCLUSION: Treatment quality is directly related to the amount of procedures implemented by the orthodontist, associated with concepts and resources from Periodontics and Dental Prosthesis. Microesthetics cannot be seen in isolation, but rather as the key to establish a pleasant smile (miniesthetics in addition to a harmonious face (macroesthetics and a human being with high self-esteem (hyper-esthetics.

Mandibular dental arch short and long-term spontaneous dentoalveolar changes after slow or rapid maxillary expansion: a systematic review

Directory of Open Access Journals (Sweden)

Arthur César de Medeiros Alves

Full Text Available ABSTRACT Objective: The aim of this systematic review was to analyze the short and long-term spontaneous dentoalveolar changes of the mandibular dental arch after slow (SME or rapid (RME maxillary expansion in the mixed and early permanent dentitions. Methods: An electronic search was performed in the following databases: PubMed/Medline, Cochrane Library, Scopus, Embase and Web of Science. Eligibility criteria for article selection included randomized controlled trials and prospective studies written in English, with no restriction of year of publication, involving patients who underwent SME or RME during the mixed or early permanent dentitions. A double-blind search of articles was performed by two reviewers. Initially, the title and the abstract of the studies were read, and their references were also hand-searched for possible missing studies. A methodological quality scoring scale was used to analyze the selected articles. Results: The search retrieved 373 articles, but only 6 were selected for review after application of the eligibility and exclusion criteria. Non-clinically significant spontaneous dentoalveolar changes of approximately 1mm were found in the mandibular dental arch in the short and long-term, after slow or rapid maxillary expansions. Furthermore, no significant differences were found between treated and control groups. Conclusions: There is enough evidence to conclude that negligible short and long-term spontaneous dentoalveolar changes tend to occur in the mandibular dental arch after SME or RME in the mixed and early permanent dentitions. More randomized studies with appropriate control group are required to better evaluate this issue.

Is the shortened dental arch still a satisfactory option?

Science.gov (United States)

Manola, M; Hussain, F; Millar, B J

2017-07-21

Aims Dental practitioners may hold the view that missing posterior teeth should be replaced to ensure a healthy masticatory system and satisfactory oral function. However, the shortened dental arch (SDA) concept is still in use, but after 35 years is it acceptable? This review searches the literature for the evidence and opinions regarding the suitability of the SDA as a current treatment modality.Methods Medline and PubMed databases were searched for relevant terms, all the abstracts were assessed and articles selected according to the pre-set exclusion and inclusion criteria.Results The search yielded 1,895 articles and after the assessment of the abstracts and application of the exclusion and inclusion criteria, 44 articles were selected for this review. These included 11 cohort studies, two longitudinal studies, two animal studies, three cross sectional studies, eight clinical studies and 18 case control studies. There appears to be a trend over the past three decades for more papers to be opposed to the SDA concept.Conclusion Evidence that the SDA causes pathology is lacking. Clinicians, healthcare authorities and patients have shown favourable attitudes towards the SDA and this continues, although there is an increase in studies opposing the concept and some are dissatisfied with this option. The concept remains viable particularly for the medically compromised patient or where restorations are considered unsuitable but further more specific studies are warranted.

Evaluation of arch width variations among different skeletal patterns in South Indian population.

Science.gov (United States)

Prasad, Mandava; Kannampallil, Senny Thomas; Talapaneni, Ashok Kumar; George, Suja Ani; Shetty, Sharath Kumar

2013-01-01

Anterior cranial base can be taken as a reference line (SN) to determine the steepness of mandibular plane. Subjects with high mandibular plane angle tend to have a long face and one with low MP-SN angle has a shorter face. This study was done to investigate if dental arch widths correlated with vertical facial types and if there are any differences in arch widths between untreated male and female adults in South Indian population. Lateral cephalogram and dental casts were obtained from 180 untreated South Indian adults (90 males and 90 females) above 18 year old with no cross bite, minimal crowding and spacing. The angle between the anterior cranial base and the mandibular plane was measured on lateral cephalogram of each patient. Dental casts were used to obtain comprehensive dental measurements including maxillary and mandibular inter canine, inter premolar and inter molar widths, as well as amount of crowding or spacing. The results showed that male arch widths were significantly larger than those of females (P population. The results obtained in our study when compared with studies done in other population groups showed that there is difference in inter arch widths according to ethnicity and race. It was concluded that the dental arch width is associated with gender, race and vertical facial morphology. Thus using individualized arch wires according to each patient's pre treatment arch form and width is suggested during orthodontic treatment.

A systematic review of the consequences of premature birth on palatal morphology, dental occlusion, tooth-crown dimensions, and tooth maturity and eruption.

Science.gov (United States)

Paulsson, Liselotte; Bondemark, Lars; Söderfeldt, Björn

2004-04-01

This systematic review addresses the question whether prematurity results in alteration of palatal morphology, dental occlusion, tooth-crown dimensions, and tooth maturation. A literature survey from the PubMed database covering the period from January 1966 to November 2002 used the Medical Subject Headings terms "infant, premature," and "infant, low birth weight" in combination with "jaws," "dental physiology," "dentition," and "tooth abnormalities." Controlled studies written in English and with definitions of premature birth according to the World Health Organization were selected. Two reviewers selected and extracted the data independently and also assessed the quality of the studies. The search strategy resulted in 113 articles, of which 13 met the inclusion criteria. Scientific evidence was found for altered palatal morphology in the short term among the premature children, and oral intubation was a contributing factor to the alterations. If corrected age was considered for the premature children, no delay in dental development and eruption was found compared with normally born children. Thus, the early birth of premature children must be taken in account when planning for orthodontic treatment. Because of the contradictory results and lack of longitudinal studies, the scientific evidence was too weak to answer the questions whether premature birth causes permanent alteration of palatal morphology, alteration of dental occlusion, and altered tooth-crown dimensions. To answer these questions and obtain reliable scientific evidence whether premature children are at risk for malocclusions from possible alterations of palatal morphology such as asymmetry and high arched palates, further well-designed controlled studies as well as longitudinal studies are needed.

Effect of an intraoral retrusion plate on maxillary arch dimensions in complete bilateral cleft lip and palate patients

NARCIS (Netherlands)

Oosterkamp, B.C.; van Oort, R.P.; Dijkstra, P.U.; Stellingsma, K.; Bierman, M.W.; de Bont, L.G.

Objective: The aim of this study was to analyze maxillary arch dimensions in patients with complete bilateral cleft lip and palate treated with an intraoral retrusion plate prior to lip closure. Patients: The effects of the intraoral retrusion plate were evaluated on serially obtained maxillary

Botulinum Toxin Type A as Preoperative Treatment for Immediately Loaded Dental Implants Placed in Fresh Extraction Sockets for Full-Arch Restoration of Patients With Bruxism.

Science.gov (United States)

Mijiritsky, Eitan; Mortellaro, Carmen; Rudberg, Omri; Fahn, Miri; Basegmez, Cansu; Levin, Liran

2016-05-01

The aim of the present report was to describe the use of Botulinum toxin type A as preoperative treatment for immediately loaded dental implants placed in fresh extraction sockets for full-arch restoration of patients with bruxism. Patients with bruxism who were scheduled to receive immediately loaded full-arch implant supported fixed restorations were included in this retrospective clinical report. To reduce the occlusal forces applied in patients with bruxism, Botulinum toxin type A was introduced prior to the implant placement procedure. Patients were followed and implant survival as well as peri-implant bone level was assessed in each periodic follow-up visit. Adverse effects were also recorded. A control group with no use of Botulinum toxin was evaluated as well. A total of 26 patients (13 test and 13 control), with bruxism, aged 59.15 ± 11.43 years on average were included in this retrospective report and received immediately loaded dental implants placed in fresh extraction sockets for full-arch restoration. The test group treatment preceded by Botulinum toxin type A injection. Maxillary arches were supported by 8 to 10 implants while the mandibular arch was supported by 6 implants. All surgeries went uneventfully and no adverse effects were observed. The average follow-up time was 32.5 ± 10.4 months (range, 18-51). In the test group, no implant failures were recorded. One patient presented with 1 to 2 mm bone loss around 4 of the implants; the other implants presented with stable bone level. In the control group 1 patient lost 2 implants and another demonstrated 2 mm bone loss around 3 of the implants. The preoperative use of Botulinum toxin in patients with bruxism undergoing full-arch rehabilitation using immediately loaded dental implants placed in fresh extraction sockets seems to be a technique that deserves attention. Further long-term, large-scale randomized clinical trials will help to determine the additional benefit of this suggested

Dental arch relationship in children with complete unilateral cleft lip and palate following warsaw (one-stage repair) and oslo protocols.

NARCIS (Netherlands)

Fudalej, P.S.; Hortis-Dzierzbicka, M.; Dudkiewicz, Z.; Semb, G.

2009-01-01

OBJECTIVE: To compare the dental arch relationship following one-stage repair of unilateral cleft lip and palate (UCLP) in Warsaw with a matched sample of patients treated by the Oslo Cleft Team. MATERIAL: Study models of 61 children (mean age, 11.2; SD, 1.7) with a nonsyndromic complete UCLP

In-vitro evaluation of the accuracy of conventional and digital methods of obtaining full-arch dental impressions.

Science.gov (United States)

Ender, Andreas; Mehl, Albert

2015-01-01

To investigate the accuracy of conventional and digital impression methods used to obtain full-arch impressions by using an in-vitro reference model. Eight different conventional (polyether, POE; vinylsiloxanether, VSE; direct scannable vinylsiloxanether, VSES; and irreversible hydrocolloid, ALG) and digital (CEREC Bluecam, CER; CEREC Omnicam, OC; Cadent iTero, ITE; and Lava COS, LAV) full-arch impressions were obtained from a reference model with a known morphology, using a highly accurate reference scanner. The impressions obtained were then compared with the original geometry of the reference model and within each test group. A point-to-point measurement of the surface of the model using the signed nearest neighbour method resulted in a mean (10%-90%)/2 percentile value for the difference between the impression and original model (trueness) as well as the difference between impressions within a test group (precision). Trueness values ranged from 11.5 μm (VSE) to 60.2 μm (POE), and precision ranged from 12.3 μm (VSE) to 66.7 μm (POE). Among the test groups, VSE, VSES, and CER showed the highest trueness and precision. The deviation pattern varied with the impression method. Conventional impressions showed high accuracy across the full dental arch in all groups, except POE and ALG. Conventional and digital impression methods show differences regarding full-arch accuracy. Digital impression systems reveal higher local deviations of the full-arch model. Digital intraoral impression systems do not show superior accuracy compared to highly accurate conventional impression techniques. However, they provide excellent clinical results within their indications applying the correct scanning technique.

Accuracy of a reformulated fast-set vinyl polysiloxane impression material using dual-arch trays.

Science.gov (United States)

Kang, Alex H; Johnson, Glen H; Lepe, Xavier; Wataha, John C

2009-05-01

A common technique used for making crown impressions involves use of a vinyl polysiloxane impression material in combination with a dual-arch tray. A leading dental manufacturer has reformulated its vinyl polysiloxane (VPS) impression line, but the accuracy of the new material has not been verified. The purpose of this study was to assess the accuracy of reformulated VPS impression materials using the single-step dual-arch impression technique. Dual-arch impressions were made on a typodont containing a master stainless steel standard crown preparation die, from which gypsum working dies were formed, recovered, and measured. The impression materials evaluated were Imprint 3 Penta Putty with Quick Step Regular Body (IP-0); Imprint 3 Penta Quick Step Heavy Body with Quick Step Light Body (IP-1); Aquasil Ultra Rigid Fast Set with LV Fast Set (AQ-1); and Aquasil Ultra Heavy Fast Set with XLV Fast Set (AQ-2) (n=10). All impressions were disinfected with CaviCide spray for 10 minutes prior to pouring with type IV gypsum. Buccolingual (BL), mesiodistal (MD), and occlusogingival (OG) dimensions were measured and compared to the master die using an optical measuring microscope. Linear dimensional change was also assessed for IP-0 and AQ-1 at 1 and 24 hours based on ANSI/ADA Specification No. 19. Single-factor ANOVA with Dunnett's T3 multiple comparisons was used to compare BL, MD, and OG changes, with hypothesis testing at alpha=.05. A repeated-measures ANOVA was used to compare linear dimensional changes. There were statistical differences among the 4 impression systems for 3 of 4 dimensions of the master die. IP-0 working dies were significantly larger in MD and OG-L dimensions but significantly smaller in the BL dimension. IP-1 working dies were significantly smaller in the BL dimension compared to the master die. With the exception of IP-0, differences detected were small and clinically insignificant. No significant differences were observed for linear dimensional change

The randomized shortened dental arch study (RaSDA: design and protocol

Directory of Open Access Journals (Sweden)

Kern Matthias

2010-02-01

Full Text Available Abstract Background Various treatment options for the prosthetic treatment of jaws where all molars are lost are under discussion. Besides the placement of implants, two main treatment types can be distinguished: replacement of the missing molars with removable dental prostheses and non-replacement of the molars, i.e. preservation of the shortened dental arch. Evidence is lacking regarding the long-term outcome and the clinical performance of these approaches. High treatment costs and the long time required for the treatment impede respective clinical trials. Methods/design This 14-center randomized controlled investigator-initiated trial is ongoing. Last patient out will be in 2010. Patients over 35 years of age with all molars missing in one jaw and with at least both canines and one premolar left on each side were eligible. One group received a treatment with removable dental prostheses for molar replacement (treatment A. The other group received a treatment limited to the replacement of all missing anterior and premolar teeth using fixed bridges (treatment B. A pilot trial with 32 patients was carried out. Two hundred and fifteen patients were enrolled in the main trial where 109 patients were randomized for treatment A and 106 for treatment B. The primary outcome measure is further tooth loss during the 5-year follow-up. The secondary outcome measures encompassed clinical, technical and subjective variables. The study is funded by the Deutsche Forschungsgemeinschaft (German Research Foundation, DFG WA 831/2-1, 2-2, 2-3, 2-4, 2-5. Discussion The particular value of this trial is the adaptation of common design components to the very specific features of complex dental prosthetic treatments. The pilot trial proved to be indispensable because it led to a number of adjustments in the study protocol that considerably improved the practicability. The expected results are of high clinical relevance and will show the efficacy of two common

Twin - Arch technique. Revival of the "edgewise -Technique"?

Directory of Open Access Journals (Sweden)

Jacob Karp

2012-01-01

The SNB – Bracket brings a new dimension into the orthodontic world which is most apparent in extraction cases. Its Teflon – like material has a very low friction coefficient thus, reducing the treatment time considerably. Through the use of low dimensioned arch wires, the Twin – Arch Technique becomes a Light – wire system and simultaneously provides good anchorage and torque control.

Loss of space and dental arch length after the loss of the lower first primary molar: a longitudinal study.

Science.gov (United States)

Cuoghi, O A; Bertoz, F A; de Mendonca, M R; Santos, E C

1998-01-01

The premature loss of primary teeth may harm the normal occlusal development, although there are debates relating to the necessity of using space maintainer appliances. The aim of the study is to evaluate the changes in the dental arch perimeter and the space reduction after the premature loss of the lower first primary molar in the mixed dentition stage. The sample consists of 4 lower arch plaster models of 31 patients, within the period of pre-extraction, 6, 12 and 18 months after the lower first primary molar extraction. A reduction of space was of noted with the cuspid dislocation and the permanent incisors moving toward the space of the extraction site. It was concluded that the lower first molar primary premature loss, during the mixed dentition, implicates an immediate placement of a space maintainer.

Avaliação longitudinal de arcadas dentárias individualizadas com o método Borda WALA Lontigitudinal evaluation of dental arches individualizated by WALA ridge

Directory of Open Access Journals (Sweden)

Márcia de Fátima Conti

2011-04-01

Full Text Available INTRODUÇÃO: a forma da arcada dentária inferior é considerada uma das principais referências no diagnóstico, sendo um fator importante para a estabilidade do tratamento ortodôntico. OBJETIVOS: avaliar as alterações nas distâncias intercaninos e intermolares inferiores durante e 3 anos após a finalização do tratamento ortodôntico, no qual foi utilizado o método Borda WALA para individualização da forma da arcada dentária. MÉTODOS: a amostra foi composta por 20 pacientes (12 do sexo feminino e 8 do masculino, com idade média de 20,88 anos. Os modelos de gesso iniciais, finais e de pós-tratamento foram utilizados para medição das distâncias intercaninos e intermolares no centro da vestibular da coroa clínica e na largura da Borda WALA. Os dados foram avaliados por meio do teste ANOVA dependente seguido pelo teste de Tukey (pINTRODUCTION: The form of mandibular arch is considered one of the main references among the diagnostic tools because the maintenance of this arch form and dimension is an important factor for stability of orthodontic treatment. OBJECTIVES: To evaluate the changes in mandibular intercanine and intermolar widths during orthodontic treatment and 3 years of posttreatment, in which the WALA ridge was used for individualization of the mandibular arch form. METHODS: Sample comprised of 20 patients (12 women and 8 men, with a mean age of 20.88 years. The dental casts of the initial, final and post-treatment evaluation were used for measurement of the intercanine and intermolar distances in the center of the buccal surface of the clinical crown and in the width of the WALA ridge. Data were analyzed by means of ANOVA test followed by Tukey test (p<0.05. RESULTS: Indicated that there was a statistically significant difference in intercanine and intermolar distances among the three stages evaluated. These distances increased significantly with treatment, and presented a reduction in the post-treatment period

Evaluation of Maxillary Interpremolar, Molar Width by DRNA Indices and Arch Dimension, Arch Form in Maratha Population

Directory of Open Access Journals (Sweden)

Nitin Dungarwal

2013-01-01

Conclusion: Significant correlation was found between the sum of maxillary incisors and interpremolar width but not with the intermolar width while sum of mandibular incisors showed significant correlation with the interpremolar and intermolar arch width. There is no single arch form unique to any of the ethnic groups. A new formula is proposed to determine the premolar and molar index.

The randomized shortened dental arch study: tooth loss over five years.

Science.gov (United States)

Walter, M H; Hannak, W; Kern, M; Mundt, T; Gernet, W; Weber, A; Wöstmann, B; Stark, H; Werner, D; Hartmann, S; Range, U; Jahn, F; Passia, N; Pospiech, P; Mitov, G; Brückner, J; Wolfart, S; Busche, E; Luthardt, R G; Heydecke, G; Marré, B

2013-04-01

The study was designed to provide clinical outcome data for two treatments of the shortened dental arch (SDA). In a multicenter randomized controlled clinical trial, patients with complete molar loss in one jaw were provided with either a partial removable dental prosthesis (PRDP) retained with precision attachments or treated according to the SDA concept preserving or restoring a premolar occlusion. No implants were placed. The primary outcome was tooth loss. Of 152 treated patients, 132 patients reached the 5-year examination. Over 5 years, 38 patients experienced tooth loss. For the primary outcome tooth loss, the Kaplan-Meier survival rates at 5 years were 0.74 (95% CI 0.64, 0.84) in the PRDP group and 0.74 (95% CI 0.63, 0.85) in the SDA group. For tooth loss in the study jaw, the survival rates at 5 years were 0.88 (95% CI 0.80, 0.95) in the PRDP group and 0.84 (95% CI 0.74, 0.93) in the SDA group. The differences were not significant. No Cox regression models of appropriate fit explaining tooth loss on the patient level could be found. The overall treatment goals of a sustainable oral rehabilitation and the avoidance of further tooth loss over longer periods were not reliably achievable. The influence of the type of prosthetic treatment on tooth loss might have been overestimated. Regarding our results, the patient's view will gain even more importance in the clinical decision between removable and fixed restorations in SDAs.

3D space analysis of dental models

Science.gov (United States)

Chuah, Joon H.; Ong, Sim Heng; Kondo, Toshiaki; Foong, Kelvin W. C.; Yong, Than F.

2001-05-01

Space analysis is an important procedure by orthodontists to determine the amount of space available and required for teeth alignment during treatment planning. Traditional manual methods of space analysis are tedious and often inaccurate. Computer-based space analysis methods that work on 2D images have been reported. However, as the space problems in the dental arch exist in all three planes of space, a full 3D analysis of the problems is necessary. This paper describes a visualization and measurement system that analyses 3D images of dental plaster models. Algorithms were developed to determine dental arches. The system is able to record the depths of the Curve of Spee, and quantify space liabilities arising from a non-planar Curve of Spee, malalignment and overjet. Furthermore, the difference between total arch space available and the space required to arrange the teeth in ideal occlusion can be accurately computed. The system for 3D space analysis of the dental arch is an accurate, comprehensive, rapid and repeatable method of space analysis to facilitate proper orthodontic diagnosis and treatment planning.

Accuracy and precision of polyurethane dental arch models fabricated using a three-dimensional subtractive rapid prototyping method with an intraoral scanning technique.

Science.gov (United States)

Kim, Jae-Hong; Kim, Ki-Baek; Kim, Woong-Chul; Kim, Ji-Hwan; Kim, Hae-Young

2014-03-01

This study aimed to evaluate the accuracy and precision of polyurethane (PUT) dental arch models fabricated using a three-dimensional (3D) subtractive rapid prototyping (RP) method with an intraoral scanning technique by comparing linear measurements obtained from PUT models and conventional plaster models. Ten plaster models were duplicated using a selected standard master model and conventional impression, and 10 PUT models were duplicated using the 3D subtractive RP technique with an oral scanner. Six linear measurements were evaluated in terms of x, y, and z-axes using a non-contact white light scanner. Accuracy was assessed using mean differences between two measurements, and precision was examined using four quantitative methods and the Bland-Altman graphical method. Repeatability was evaluated in terms of intra-examiner variability, and reproducibility was assessed in terms of inter-examiner and inter-method variability. The mean difference between plaster models and PUT models ranged from 0.07 mm to 0.33 mm. Relative measurement errors ranged from 2.2% to 7.6% and intraclass correlation coefficients ranged from 0.93 to 0.96, when comparing plaster models and PUT models. The Bland-Altman plot showed good agreement. The accuracy and precision of PUT dental models for evaluating the performance of oral scanner and subtractive RP technology was acceptable. Because of the recent improvements in block material and computerized numeric control milling machines, the subtractive RP method may be a good choice for dental arch models.

Dental arch relationship outcomes in one- and two-stage palatoplasty for Japanese patients with complete unilateral cleft lip and palate.

Science.gov (United States)

Mikoya, Tadashi; Shibukawa, Toyoko; Susami, Takafumi; Sato, Yoshiaki; Tengan, Toshimoto; Katashima, Hirotaka; Oyama, Akihiko; Matsuzawa, Yusuke; Ito, Yumi; Funayama, Emi

2015-05-01

To compare dental arch relationship outcomes following one- and two-stage palatal repair. Nonrandomized, clinical trial with concurrent control. Hokkaido University Hospital. Sixty-eight consecutively treated Japanese patients with complete unilateral cleft lip and palate. Thirty-one of the 68 patients underwent two-stage palatoplasty with delayed hard palate closure, and 37 patients underwent one-stage pushback palatoplasty. Dental casts were taken at 4.9 to 6.3 (mean: 5.2) years of age in the two-stage group and at 4.0 to 6.3 (mean: 5.1) years of age in the one-stage group, and dental arch relationships were assessed using the 5-Year-Olds' Index (5-Y) by four raters and the Huddart/Bodenham Index (HB) by two raters. Intrarater and interrater reliabilities evaluated using weighted kappa statistics were good or better for the 5-Y and HB ratings. The mean 5-Y score was 2.94 in the two-stage group and 3.13 in the one-stage group (P value was not significant). However, there was a significant difference in distributions between the groups (P < .05). The HB scores of molars were significantly greater in the two-stage group than in the one-stage group (P < .05). The rank correlation coefficients between the 5-Y and total HB score (ρ = -0.840, P < .01) and between the 5-Y and the score of the incisors in the HB (ρ = -0.814, P < .01) were significantly increased. These results suggest that the anteroposterior relationship was not significantly different between the groups, but the transversal relationship was better in the two-stage group than in the one-stage group.

Inter-arch digital model vs. manual cast measurements: Accuracy and reliability.

Science.gov (United States)

Kiviahde, Heikki; Bukovac, Lea; Jussila, Päivi; Pesonen, Paula; Sipilä, Kirsi; Raustia, Aune; Pirttiniemi, Pertti

2017-06-28

The purpose of this study was to evaluate the accuracy and reliability of inter-arch measurements using digital dental models and conventional dental casts. Thirty sets of dental casts with permanent dentition were examined. Manual measurements were done with a digital caliper directly on the dental casts, and digital measurements were made on 3D models by two independent examiners. Intra-class correlation coefficients (ICC), a paired sample t-test or Wilcoxon signed-rank test, and Bland-Altman plots were used to evaluate intra- and inter-examiner error and to determine the accuracy and reliability of the measurements. The ICC values were generally good for manual and excellent for digital measurements. The Bland-Altman plots of all the measurements showed good agreement between the manual and digital methods and excellent inter-examiner agreement using the digital method. Inter-arch occlusal measurements on digital models are accurate and reliable and are superior to manual measurements.

Simplified zygomatic arch radiographic technique to overcome the drawback of jug handle view

Directory of Open Access Journals (Sweden)

Siddana Gouda Siddana

2014-01-01

Full Text Available Introduction: The imaging of the zygomatic arch is very important in the diagnosis and management of zygomatic arch fractures. It is accomplished by jug handle radiography (a variation of the submentovertex view and sometimes with modifications like the tangential or tea cup projection. For these techniques, the patient has to be positioned in a way which makes it non-applicable in cases having cervical injuries or suspected cervical injuries. Aims and Objectives: To devise a new approach with which the image of the zygomatic arch can be obtained with normal head position, in either sitting or supine position, using a dental X-ray machine and an occlusal film, which can even be used in patients with cervical injuries or suspected cervical injuries, without any complications. Materials and Methods: The present approach requires a dental X-ray machine and an occlusal X-ray film thereby eliminating the need for additional equipment like a general X-ray machine and extraoral film cassette. This approach can be carried out in a conventional dental setup to rule out zygomatic arch fractures. Conclusion: This technique can be applied in patients having cervical injuries or suspected cervical injuries, thus overcoming the drawback of the jug handle view, and is easy to master. This technique can be used in a conventional dental setup and holds good with the ALARA (as low as reasonably achievable principle of radiation protection and safety.

Knowledge, perceptions and clinical application of the shortened dental arch concept among Malaysian government dentists.

Science.gov (United States)

Kasim, Siti Kamilah Mohd; Razak, Ishak Abdul; Yusof, Zamros Yuzadi Mohd

2018-02-01

To assess the knowledge and perceptions of Malaysian government dentists regarding the shortened dental arch (SDA) concept and its application in clinical practice. The SDA concept refers to a specific type of dentition with intact anterior teeth and a reduction in posterior occlusal pairs. Dentists' knowledge and perceptions of the SDA concept can influence its application in clinical practice. A self-administered questionnaire on the SDA concept was distributed to 326 government dentists in the states of Selangor and Kuala Lumpur, Malaysia. The data were analysed using SPSS version 22 software. The response rate was 84.0%. The majority of respondents had good knowledge on five of six knowledge items and good attitudes towards 10 of 17 perception items. However, only one-fifth (20.4%) reported having applied the SDA concept in the clinic. A larger number of participants who graduated locally than who graduated abroad perceived that patients 5 years of work experience perceived that the SDA concept enables simpler treatment planning (P concept, it is not widely applied in the clinic. Concerted efforts in SDA training of dentists are needed to help to shorten denture waiting lists and reduce costs. © 2017 FDI World Dental Federation.

Changes in the palatal dimensions of mouth breathing children caused by nasal obstruction

Science.gov (United States)

Indiarti, I. S.; Setyanto, D. B.; Kusumaningrum, A.; Budiardjo, S. B.

2017-08-01

During children’s growth and development, the breathing process plays an important role in craniofacial growth, especially of the palate. Nose breathing can stimulate the lateral growth of the maxilla, thus making the palate flat. Disturbances in nose breathing caused by nasal obstruction such as allergic rhinitis, adenoid hypertrophy, rhinosinusitis, nasal polyps, and obstructive sleep apnea can lead to a mouth breathing habit in children. This habit can cause palatal dimension changes such as a narrow V-shaped maxillary arch and a high palatal vault. This study analyzed the relationship between the mouth breathing habit in children who have nasal obstruction and palatal dimension changes. A cross-sectional descriptive study was conducted with a consecutive sampling method on children 7-18 years old with a history of allergic rhinitis, adenoid hypertrophy, rhinosinusitis, nasal polyps, and obstructive sleep apnea in the Pediatric Respirology and Pediatric Immunology Allergy Outpatient Clinic Kiara Maternal and Child Health Center at Cipto Mangunkusumo Hospital in Jakarta. The palatal dimensions were measured by the height and transversal width of the hard palate of castings of each child’s upper dental arch using vernier calipers. Palatal dimension changes were found in children with a mouth breathing habit due to nasal obstruction.

A comparative study on the stress distribution around dental implants in three arch form models for replacing six implants using finite element analysis.

Science.gov (United States)

Zarei, Maryam; Jahangirnezhad, Mahmoud; Yousefimanesh, Hojatollah; Robati, Maryam; Robati, Hossein

2018-01-01

Dental implant is a method to replacement of missing teeth. It is important for replacing the missed anterior teeth. In vitro method is a safe method for evaluation of stress distribution. Finite element analysis as an in vitro method evaluated stress distribution around replacement of six maxillary anterior teeth implants in three models of maxillary arch. In this in vitro study, using ABAQUS software (Simulia Corporation, Vélizy-Villacoublay, France), implant simulation was performed for reconstruction of six maxillary anterior teeth in three models. Two implants were placed on both sides of the canine tooth region (A model); two implants on both sides of the canine tooth region and another on one side of the central incisor region (B model); and two implants on both sides of the canine tooth region and two implants in the central incisor area (C model). All implants evaluated in three arch forms (tapered, ovoid, and square). Data were analyzed by finite analysis software. Von Mises stress by increasing of implant number was reduced. In a comparison of A model in each maxillary arch, the stress created in the cortical and cancellous bones in the square arch was less than ovoid and tapered arches. The stress created in implants and cortical and cancellous bones in C model was less than A and B models. The C model (four-implant) reduced the stress distribution in cortical and cancellous bones, but this pattern must be evaluated according to arch form and cost benefit of patients.

Dental erosion caused by gastroesophageal reflux disease: a case report.

Science.gov (United States)

Cengiz, Seda; Cengiz, M Inanç; Saraç, Y Sinasi

2009-07-22

Chronic regurgitation of gastric acids in patients with gastroesophageal reflux disease may cause dental erosion, which can lead in combination with attrition or bruxism to extensive loss of coronal tooth tissue. This clinical report describes treatment of severe tooth wear of a gastroesophageal reflux disease patient who is 54-year-old Turkish male patient. After his medical treatment, severe tooth wear, bruxism and decreased vertical dimensions were determined. The vertical dimension was re-established and maxillary and mandibular anterior and posterior teeth were prepared for metal-ceramic restorations. Metal-ceramic fixed partial dentures were fabricated as full mouth restorations for both maxillary and mandibular arches because of splinting all teeth. And then maxillary stabilization splint was fabricated for his bruxism history. Significant loss of coronal tooth structure must taken into consideration. Gastroesophageal reflux disease by itself or in combination with attrition, abrasion or bruxism may be responsible for the loss. An extensive diagnostic evaluation is essential for the medical and dental effects of the problem.

Is it possible to use cross-sectional and vertical facial measurements to establish the shape of the mandibular arch?

Science.gov (United States)

El Haje, Ossam Abu; Pompeo, Daniela Daufenback; Furtado, Gisela Crippa; Rivera, Luciana Monti Lima; Paranhos, Luiz Renato

2014-11-01

Given the benefits of radiographic cephalometric studies in determining patterns of dental-skeletal-facial normality in orthodontics, the aim of this study was to investigate the association between mandibular dental arch shape and cross-sectional and vertical facial measurements. It was analyzed plaster casts and teleradiographs in frontal and lateral norm belonging to 50 individuals, aged between 15 and 19 years, with no previous history of orthodontic treatment and falling into four of the six Andrews's occlusion keys. The plaster models were scanned (3D) and the images of the dental arches were classified subjectively as oval, triangular and quadrangular by three calibrated examiners, with moderate inter-examiner agreement (Kappa = 0.50). After evaluation of the method error by paired t test (p > 0.05), it was carried out the analysis of cross-sectional and vertical facial measurements to be compared to the shape of the dental arch. Data were subjected to one-way analysis of variance with a significance level of 5%. When the VERT index was compared with the three arch shapes, no measurement showed statistically significant differences (p > 0.05): triangular (0.54); oval (0.43); and quadrangular (0.73); as well as there were no differences (p > 0.05) in the widths of the face (141.20; 141.26; 143.27); maxilla (77.27; 77.57; 78.59) and mandible (105.13; 103.96; 104.28). It can be concluded that there was no correlation between different shapes of the mandibular dental arch and the cross-sectional and vertical facial measurements investigated.

Dental pulp stone formation during orthodontic treatment: A ...

African Journals Online (AJOL)

2015-06-21

Jun 21, 2015 ... the presence of dental pulp stone, gender, age, tooth type and arches. Results: Dental pulp ... primary and permanent dentition.[1] Dental pulp stones .... interpretation provided training to familiarize the other observer with the ...

A Comparison of Arch Width with Angle Classification and Wits Appraisal in Class 2 Division 1 and Class 1 Individuals.

Science.gov (United States)

1983-05-01

longitudinal changes in arch width between lateral incisors, canines and second premolars or deciduous second molars at four stages of dental eruption in 22 male... dental arch or skeletal widths. Also, he made no attempt to divide his sample into normal and malocclusion groups. -J 7 Warren (1959) studying twenty...buccal crossbite of the posterior teeth Many clinicians believe that this problem is highly correlated with tfte type or classification of malocclusion

Intraoral 3D Scanning or Dental Impressions for the Assessment of Dental Arch Relationships in Cleft Care: Which is Superior?

Science.gov (United States)

Chalmers, E V; McIntyre, G T; Wang, W; Gillgrass, T; Martin, C B; Mossey, P A

2016-09-01

This study was undertaken to evaluate intraoral 3D scans for assessing dental arch relationships and obtain patient/parent perceptions of impressions and intraoral 3D scanning. Forty-three subjects with nonsyndromic unilateral cleft lip and palate (UCLP) had impressions taken for plaster models. These and the teeth were scanned using the R700 Orthodontic Study Model Scanner and Trios® Digital Impressions Scanner (3Shape A/S, Copenhagen, Denmark) to create indirect and direct digital models. All model formats were scored by three observers on two occasions using the GOSLON and modified Huddart Bodenham (MHB) indices. Participants and parents scored their perceptions of impressions and scanning from 1 (very good) to 5 (very bad). Intra- and interexaminer reliability were tested using GOSLON and MHB data (Cronbach's Alpha >0.9). Bland and Altman plots were created for MHB data, with each model medium (one-sample t tests, P 0.9) were good for all formats with the direct digital models having the lowest interexaminer differences. Participants had higher ratings for scanning comfort (84.8%) than impressions (44.2%) (P impressions (51.2%) (P > .05). None disliked scanning, but 16.3% disliked impressions. Data for parents and children positively correlated (P 3D scans was superior to indirect digital and to plaster models; Subjects with UCLP preferred intra-oral 3D scanning to dental impressions, mirrored by parents/carers; This study supports the replacement of conventional impressions with intra-oral 3D scans in longitudinal evaluations of the outcomes of cleft care.

ArchE - An Architecture Design Assistant

Science.gov (United States)

2007-08-02

Architecture Design Assistant Len Bass August 2, 2007 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the...ArchE - An Architecture Design Assistant 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK...X, Module X 3 Author / Presenter, Date if Needed What is ArchE? ArchE is a software architecture design assistant, which: • Takes quality and

A systematic review of prosthetic restoration in patients with shortened dental arches

Directory of Open Access Journals (Sweden)

Kenji Fueki

2011-08-01

Full Text Available The literature regarding the effect of prosthetic restoration in patients having distal extension edentulous space in posterior area (shortened dental arch: SDA is reviewed in the following article. Information retrieval followed a systematic approach using PubMed. Articles in English published between 1966 and March 2011 describing the outcome of treatment with various prostheses were evaluated. From the search results of 98 articles, 21 articles met the inclusion criteria. Treatment with removable partial dentures (RPDs improved masticatory function, patient satisfaction and oral health-related quality of life (OHRQoL. However, no significant difference was found in the outcomes between patients with RPDs and with cantilever fixed partial dentures (CFPDs. Caries developed more frequently after treatment with RPDs than CFPDs. The time to survival for CFPDs was not longer than that for RPDs, while more visits to maintain RPDs were required than for CFPDs. No significant difference was found in masticatory function, OHRQoL, and occlusal stability between patients with RPDs and those without restoration of missing molars. Consequently, treatment with RPDs for SDA seems to be less advantageous than CFPDs or no restoration for missing molars. Further research is required to validate treatment with implant-supported fixed partial dentures for SDA.

Interdental Spacing and Dental Caries in the Primary Dentition of 4-6 Year Old Children

Directory of Open Access Journals (Sweden)

G. Babu Kl

2012-01-01

Full Text Available Objective: There are various risk factors which play an essential role in the multifactorial disease “dental caries.” Although absence of interdental spaces in the primary dentition may increase the risk of dental caries, not many studies have been carried out to assess this correlation. This study was performed to assess the relationship between interdental spacing and dental caries in primary dentition.Materials and Methods: Five hundred 4-6 year-old children were enrolled into this study. Dental caries was recorded using the criteria given by Warren et al. Following this, impressions were made for the upper and lower arches and dental casts were poured. Interdental spaces were measured on the dental casts using a digital verniercaliper. The data obtained were subjected to statistical analysis.Results: The number of sites with interdental spaces was higher in the maxillary arch in comparison to the mandibular arch. The highest number of interdental spaces was observed between the maxillary anteriors. The number of demineralized, but non-cavitated tooth surfaces (d1were higher than the number of cavitated tooth surfaces. This difference was significant in the mandibular anterior segment. Dental caries showed a negative correlation with interdental spacing. A significant correlation was found between dental caries and interdental spacing in the posterior segment of the mandibular arch.Conclusion: This study showed that children with no interdental spacing in the primary dentition are at higher risk for dental caries.Key Words: Dental Caries; Interdental Spaces; Interproximal Caries

Comparison of arch forms between Turkish and North American

Directory of Open Access Journals (Sweden)

Ahmet A. Celebi

2016-04-01

Full Text Available ABSTRACT Objective: The aim of this study was to clarify the morphological differences in the mandibular arches of Turkish and North American white subjects. Methods: The sample included 132 Turkish (34 Class I, 58 Class II, and 40 Class III and 160 North American (60 Class I, 50 Class II, and 50 Class III subjects. The most facial portion of 13 proximal contact areas was digitized from photocopied images of patients' mandibular dental arches. Clinical bracket points were calculated for each tooth based on mandibular tooth thickness data. Four linear and two proportional measurements were taken. The subjects were grouped according to arch form types (tapered, ovoid and square in order to have frequency distribution compared between ethnic groups in each Angle classification. Results: The Turkish group showed significantly lower molar depth and more significant molar width-depth (W/D ratio in all three Angle classifications. On the other hand, the Turkish group also showed a significantly larger intercanine width in Class III malocclusion and intermolar width in Class II malocclusion. The most frequent arch forms seen were the ovoid arch form in the Turkish group and the tapered form in the white group. Conclusions: Our results demonstrate that when treating Turkish patients, one should expect to use preformed ovoid arch form orthodontic wires in a significant percentage of patients.

Maxillary Transverse Comparison of Skeletal Class I and Class III Patient Populations Using Cone Beam Computed Tomography

Science.gov (United States)

2012-04-13

dental compensations 5. Have fully erupted canines (no...expansion. Compendium 1996;17:170-178. 2. Basaran G, Hamamci N, Hamamci O. Comparison of Dental Arch Widths in Different Types of Malocclusions . World... Dental and Alveolar Arch Widths in Normal Occlusion and Class III Malocclusion . Angle Orthod 2005; 75:809- 813.   36. Vanarsdall, Transverse dimension and long-term stability, Semin Orthod 1999;5:171–180.

Reconstruction of pseudo three-dimensional dental image from dental panoramic radiograph and tooth surface shape

International Nuclear Information System (INIS)

Imura, Masataka; Kuroda, Yoshihiro; Oshiro, Osamu; Kuroda, Tomohiro; Kagiyama, Yoshiyuki; Yagi, Masakazu; Takada, Kenji; Azuma, Hiroko

2010-01-01

Three-dimensional volume data set is useful for diagnosis in dental treatments. However, to obtain three-dimensional images of a dental arch in general dental clinics is difficult. In this paper, we propose a method to reconstruct pseudo three-dimensional dental images from a dental panoramic radiograph and a tooth surface shape which can be obtained from three dimensional shape measurement of a dental impression. The proposed method finds an appropriate curved surface on which the dental panoramic radiograph is mapped by comparing a virtual panoramic image made from a tooth surface shape to a real panoramic radiograph. The developed pseudo three-dimensional dental images give clear impression of patient's dental condition. (author)

Asymmetry in dentition and shape of pharyngeal arches in the clonal fish Chrosomus eos-neogaeus: Phenotypic plasticity and developmental instability.

Directory of Open Access Journals (Sweden)

Christelle Leung

Full Text Available The effect of the environment may result in different developmental outcomes. Extrinsic signals can modify developmental pathways and result in alternative phenotypes (phenotypic plasticity. The environment can also be interpreted as a stressor and increase developmental instability (developmental noise. Directional and fluctuating asymmetry provide a conceptual background to discriminate between these results. This study aims at assessing whether variation in dentition and shape of pharyngeal arches of the clonal fish Chrosomus eos-neogaeus results from developmental instability or environmentally induced changes. A total of 262 specimens of the Chrosomus eos-neogaeus complex from 12 natural sites were analysed. X-ray microcomputed tomography (X-ray micro-CT was used to visualize the pharyngeal arches in situ with high resolution. Variation in the number of pharyngeal teeth is high in hybrids in contrast to the relative stability observed in both parental species. The basal dental formula is symmetric while the most frequent alternative dental formula is asymmetric. Within one lineage, large variation in the proportion of individuals bearing basal or alternative dental formulae was observed among sites in the absence of genetic difference. Both dentition and arch shape of this hybrid lineage were explained significantly by environmental differences. Only individuals bearing asymmetric dental formula displayed fluctuating asymmetry as well as directional left-right asymmetry for the arches. The hybrids appeared sensitive to environmental signals and intraspecific variation on pharyngeal teeth was not random but reflects phenotypic plasticity. Altogether, these results support the influence of the environment as a trigger for an alternative developmental pathway resulting in left-right asymmetry in dentition and shape of pharyngeal arches.

Bilateral Maxillary Central Incisor Impaction associated with Developing Supernumerary Premolars in the Mandibular Arch

Directory of Open Access Journals (Sweden)

Mitali Mishra

2014-01-01

We report a case of 15-year-old girl with bilaterally impacted supernumeraries in the premaxilla region associated with asymptomatic impacted developing supernumerary premolars in the mandibular arch. The supernumeraries of premaxilla region impeded the eruption of the permanent maxillary central incisors. The impacted supernumerary tooth was surgically removed and brackets bonded to the central incisors to apply orthodontic extrusive force which brought the central incisors down to their proper position in the dental arch.

Effects of pre-surgical nasoalveolar moulding on maxillary arch and nasal form in unilateral cleft lip and palate before lip surgery.

Science.gov (United States)

Fuchigami, T; Kimura, N; Kibe, T; Tezuka, M; Amir, M S; Suga, H; Takemoto, Y; Hashiguchi, M; Maeda-Iino, A; Nakamura, N

2017-11-01

To investigate the effects of pre-surgical nasoalveolar moulding (PNAM) on the maxillary arch and nasal form in patients with unilateral cleft lip and palate (UCLP). This is a retrospective case series study. The subjects were infants with complete UCLP who were treated with PNAM (n = 18) at Kagoshima University Medical and Dental Hospital (Japan) between 2006 and 2013. Maxillary dental casts and facial photographs were taken at the time of the first visit and immediately prior to lip surgery to evaluate the maxillary arch and nasal form changes. The dental casts were scanned with a laser scanner, and changes in the 3-Dimensional coordinates of anatomical landmarks and alveolar cleft width were analysed. Moreover, we investigated the correlation between the changes in the maxillary alveolar arch and nasal form. Regarding the maxillary alveolar arch form, the anterior points of the major segment had moved significantly to the cleft side just prior to the time of lip repair, and the alveolar cleft width was significantly decreased. For nasal form, the inclination and displacement of the columella were significantly improved. The improvement of columella inclination was moderately correlated with the posterior movement of the anterior points of the major segment. These findings indicate that PNAM for infants with UCLP enhanced symmetry in the maxillary alveolar arch and nasolabial form. In addition, the posterior movement of the anterior points of the maxillary alveolar arch was correlated with the improvement of columella deformation. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Comparison of Primary Molar Crown Dimensions with Stainless Steel Crowns in a Sample of Iranian Children

Directory of Open Access Journals (Sweden)

Hossein Afshar

2015-06-01

Full Text Available Background and aims. Due to anatomic variation in tooth anatomy between populations, this study compared the buccolingual (BL and mesiodistal (MD dimensions of primary molars with those of stainless steel crowns (SSCs in anIranian population. Materials and methods. Impressions were taken from both dental arches of children, and casts were poured. Teeth with caries, restoration, hypoplasia or other dental anomalies were excluded. 216 primary molars were selected and divided into 4 groups of 54 each (maxillary and mandibular first and second primary molars. MD/BL dimensions were measured using a digital caliper with 0.01 mm precision on casts and SCCs (3M brand. Data were assessed using paired t-test, post hoc test and ANOVA. P < 0.05 was considered statistically significant. Results. The MD dimension of the lower first molar SSC and the BL dimension of the lower second molar SSC had the least difference with the corresponding values of the respective teeth. The MD dimension of the upper second molar SSC and the BL dimension of the upper first molar SSC had the greatest difference with the corresponding values in the respective teeth. Comparison of the two different brands of SSCs for the upper first molar revealed that both types had significant differences with the teeth in terms of both MD (P = 0.0 and BL (P = 0.0 dimensions. Conclusion. In the studied population, best adaptation was seen in second lower molars and the least adaptationswere seen in first and second upper molars.

Panoramic dental X-ray machine X-motion drive

International Nuclear Information System (INIS)

Cushman, R.H.; Flynn, J.J.

1980-01-01

A panoramic dental x-ray machine is described which provides continuous and discontinuous radiographic images of the dental arch area of a patient. The systems for moving the chair and the column which carries the x-ray source and camera are specified. (U.K.)

Mechanics Evolution Characteristics Analysis of Pressure-arch in Fully-mechanized Mining Field

Directory of Open Access Journals (Sweden)

S.R. Wang

2014-09-01

Full Text Available Based on a practical engineering, the three-dimension computational model was built using FLAC3D under the fullymechanized mining condition. Considering four variation factors, such as the distance of mining advancing, the strength of the surrounding rock, the speed of mining advancing and the dip angle of the coal seam, the mechanics evolution characteristics of the pressure-arch were analyzed. The result showed that for the horizontal seam, the geometric shape of the pressure-arch varied from flat arch to round arch gradually and the height and thickness of the pressure-arch also increased; the maximum principal stress in the skewback also increased with the working face advancing. With the strength of the surrounding rock from soft to hard, the arch thickness reduced, and the arch loading decreased. To improve the mining speed can do some contributions to the stability of the pressure-arch in the mining field. With the increase of dip angle of the seam, the pressure-arch displayed an asymmetric shape, the vault was tilted and moved to the upward direction. At the same time, the thickness of the pressure-arch increased, and the stress concentration in the skewback tended to be further intensified.

A study of dentists’ preferences for the restoration of shortened dental arches with partial dentures

Science.gov (United States)

Nassani, Mohammad Zakaria; Ibraheem, Shukran; Al-Hallak, Khaled Rateb; Ali El Khalifa, Mohammed Othman; Baroudi, Kusai

2015-01-01

Objective: This study aimed to use a utility method in order to assess dentists’ preferences for the restoration of shortened dental arches (SDAs) with partial dentures. Also, the impact of patient age and length of the SDA on dentists’ preferences for the partial dentures was investigated. Materials and Methods: Totally, 104 subjects holding a basic degree in dentistry and working as staff members in a private dental college in Saudi Arabia were interviewed and presented with 12 scenarios for patients of different ages and mandibular SDAs of varying length. Participants were asked to indicate on a standardized visual analog scale how they would value the health of the patient's mouth if the mandibular SDAs were restored with cobalt-chromium removable partial dentures (RPDs). Results: With a utility value of 0.0 representing the worst possible health state for a mouth and 1.0 representing the best, dentists’ average utility value of the RPD for the SDAs was 0.49 (sd= 0.15). Mean utility scores of the RPDs across the 12 SDA scenarios ranged between 0.35 and 0.61. RPDs that restored the extremely SDAs attracted the highest utility values and dentists’ utility of the RPD significantly increased with the increase in the number of missing posterior teeth. No significant differences in dentists’ mean utility values for the RPD were identified among SDA scenarios for patients of different ages. Conclusion: Restoration of the mandibular SDAs by RPDs is not a highly preferred treatment option among the surveyed group of dentists. Length of the SDA affects dentists’ preferences for the RPD, but patient age does not. PMID:26038647

A technique to stabilize record bases for Gothic arch tracings in patients with implant-retained complete dentures.

Science.gov (United States)

Raigrodski, A J; Sadan, A; Carruth, P L

1998-12-01

Clinicians have long expressed concern about the accuracy of the Gothic arch tracing for recording centric relation in edentulous patients. With the use of dental implants to assist in retaining complete dentures, the problem of inaccurate recordings, made for patients without natural teeth, can be significantly reduced. This article presents a technique that uses healing abutments to stabilize the record bases so that an accurate Gothic arch tracing can be made.

Establishing the maxillary occlusal plane as a requisite for placement of an immediate implant-supported fixed prosthesis in the mandible: a case report

Directory of Open Access Journals (Sweden)

Milton Edson Miranda

Full Text Available INTRODUCTION: In patients with Bruxism, the attrition can result in excessive occlusal wear that exceeds the compensatory mechanism and loss of occlusion vertical dimension occurs. OBJECTIVE: The purpose of this article is to show the importance of re-establishing an adequate occlusal plane for the non treated arch by means of a fixed acrylic overlay, compatible with the prosthetic treatment of the arch to be rehabilitated. An upper maxillary fixed acrylic overlay restored the patient’s occlusal plane in an appropriate vertical dimension of occlusion together with a fixed prosthesis in the mandible, supported by five dental implants. CONCLUSION: When there is severe wear due to dental attrition in one of the arches, it is important to re-establish the occlusal plane and compensation curves in conjunction with the prosthetic treatment of the arch to be rehabilitated.

Differences between dentitions with palatally and labially located maxillary canines observed in incisor width, dental morphology and space conditions

DEFF Research Database (Denmark)

Artmann, L; Larsen, H J; Sørensen, H B

2010-01-01

To analyze the interrelationship between incisor width, deviations in the dentition and available space in the dental arch in palatally and labially located maxillary ectopic canine cases.......To analyze the interrelationship between incisor width, deviations in the dentition and available space in the dental arch in palatally and labially located maxillary ectopic canine cases....

Evaluation of arch form between Vietnamese and North American Caucasians using 3-dimensional virtual models.

Science.gov (United States)

Trang, Vu Thi Thu; Park, Jae Hyun; Bayome, Mohamed; Shastry, Shruti; Mellion, Alex; Kook, Yoon-Ah

2015-01-01

The purpose of this study was to investigate the three-dimensional (3D) morphologic differences in the mandibular arch of Vietnamese and North American White subjects. The sample included 113 Vietnamese subjects (41 Class I, 37 Class II and 35 Class III) and 96 White subjects (29 Class I, 30 Class II and 37 Class III). The samples were regrouped according to arch form types (tapered, ovoid, and square) to compare the frequency distribution of the three arch forms between ethnic groups in each angle classification. The facial axis point of each tooth was digitized on 3D virtual models. Four linear and two ratio variables were measured. In comparing arch dimensions, the intercanine and intermolar widths were wider in Vietnamese than in Whites (p Vietnamese group, the square arch form was the most frequent followed by tapered and ovoid arch forms. The arch forms of Whites were narrower than Vietnamese. In North American Whites, the distribution of the arch form types showed similar frequency. In Vietnamese, the square arch form was more frequent.

Dental and oral anomalies in incontinentia pigmenti: a systematic review.

Science.gov (United States)

Minić, Snežana; Trpinac, Dušan; Gabriel, Heinz; Gencik, Martin; Obradović, Miljana

2013-01-01

Incontinentia pigmenti (IP) is an X-linked genodermatosis caused by a mutation of the IKBKG gene. The objective of this study was to present a systematic review of the dental and oral types of anomalies, to determine the total number and sex distribution of the anomalies, and to analyze possible therapies. We analyzed the literature data from 1,286 IP cases from the period 1993-2010. Dental and/or oral anomalies were diagnosed for 54.38% of the investigated IP patients. Most of the anomaly types were dental, and the most frequent of these were dental shape anomalies, hypodontia, and delayed dentition. The most frequent oral anomaly types were cleft palate and high arched palate. IKBKG exon 4-10 deletion was present in 86.36% of genetically confirmed IP patients. According to the frequency, dental and/or oral anomalies represent the most frequent and important IP minor criteria. The most frequent mutation was IKBKG exon 4-10 deletion. The majority of dental anomalies and some of the oral anomalies could be corrected. Because of the presence of cleft palate and high arched palate in IP patients, these two anomalies may be considered as diagnostic IP minor criteria as well.

Complete-arch accuracy of intraoral scanners.

Science.gov (United States)

Treesh, Joshua C; Liacouras, Peter C; Taft, Robert M; Brooks, Daniel I; Raiciulescu, Sorana; Ellert, Daniel O; Grant, Gerald T; Ye, Ling

2018-04-30

Intraoral scanners have shown varied results in complete-arch applications. The purpose of this in vitro study was to evaluate the complete-arch accuracy of 4 intraoral scanners based on trueness and precision measurements compared with a known reference (trueness) and with each other (precision). Four intraoral scanners were evaluated: CEREC Bluecam, CEREC Omnicam, TRIOS Color, and Carestream CS 3500. A complete-arch reference cast was created and printed using a 3-dimensional dental cast printer with photopolymer resin. The reference cast was digitized using a laboratory-based white light 3-dimensional scanner. The printed reference cast was scanned 10 times with each intraoral scanner. The digital standard tessellation language (STL) files from each scanner were then registered to the reference file and compared with differences in trueness and precision using a 3-dimensional modeling software. Additionally, scanning time was recorded for each scan performed. The Wilcoxon signed rank, Kruskal-Wallis, and Dunn tests were used to detect differences for trueness, precision, and scanning time (α=.05). Carestream CS 3500 had the lowest overall trueness and precision compared with Bluecam and TRIOS Color. The fourth scanner, Omnicam, had intermediate trueness and precision. All of the scanners tended to underestimate the size of the reference file, with exception of the Carestream CS 3500, which was more variable. Based on visual inspection of the color rendering of signed differences, the greatest amount of error tended to be in the posterior aspects of the arch, with local errors exceeding 100 μm for all scans. The single capture scanner Carestream CS 3500 had the overall longest scan times and was significantly slower than the continuous capture scanners TRIOS Color and Omnicam. Significant differences in both trueness and precision were found among the scanners. Scan times of the continuous capture scanners were faster than the single capture scanners

Arch reconstruction with autologous pulmonary artery patch in interrupted aortic arch.

Science.gov (United States)

Lee, Won-Young; Park, Jeong-Jun

2014-04-01

Various surgical techniques have been developed for the repair of an interrupted aortic arch. However, tension and Gothic arch formation at the anastomotic site have remained major problems for these techniques: Excessive tension causes arch stenosis and left main bronchus compression, and Gothic arch configuration is related to cardiovascular complications. To resolve these problems, we adopted a modified surgical technique of distal aortic arch augmentation using an autologous main pulmonary artery patch. The descending aorta was then anastomosed to the augmented aortic arch in an end-to-side manner. Here, we report two cases of interrupted aortic arch that were repaired using this technique.

Anterior maxillary segmental distraction for correction of maxillary hypoplasia and dental crowding in cleft palate patients: a preliminary report.

Science.gov (United States)

Wang, X-X; Wang, X; Li, Z-L; Yi, B; Liang, C; Jia, Y-L; Zou, B-S

2009-12-01

To evaluate the feasibility of anterior maxillary segmental distraction (AMSD) to correct maxillary hypoplasia and severe dental crowding in cleft lip and palate (CLP) patients, 7 patients (average age 16.4 years) with maxillary hypoplasia, shortened maxillary dental arch length and severe anterior dental crowding secondary to CLP were selected for this study. After anterior maxillary segmental osteotomy, 3 patients were treated using bilateral internal distraction devices, and 4 patients were treated using rigid external distraction devices. Photographs and radiographs were taken to review the improvement in facial profile and occlusion after distraction. An average 10.25 mm anterior maxillary advancement was obtained in all patients after 10-23 days of distraction and 9-16 weeks of consolidation. The sella-nasion-point A (SNA) angle increased from 69.5 degrees to 79.6 degrees. Midface convexity was greatly improved and velopharyngeal competence was preserved. The maxillary dental arch length was greatly increased by 10.1 mm (P<0.01). Dental crowding and malocclusion were corrected by orthodontic treatment. These results show that AMSD can effectively correct the hypoplastic maxilla and severe dental crowding associated with CLP by increasing the midface convexity and dental arch length while preserving velopharyngeal function, and dental crowding can be corrected without requiring tooth extraction.

The nance lingual arch: an auxiliary device in solving lower anterior crowding.

Science.gov (United States)

Almeida, Renato Rodrigues de; Oltramari-Navarro, Paula Vanessa Pedron; Almeida, Marcio Rodrigues de; Conti, Ana Cláudia de Castro Ferreira; Navarro, Ricardo de Lima; Pacenko, Murilo Rizental

2011-01-01

After exfoliation of the primary incisors and eruption of the permanent incisors, the dentist has the opportunity of observing closely the beginning of occlusal changes. In several cases, alterations, such as lower anterior crowding, can be prevented and treated with proper follow-up. In the mixed dentition, one of the mechanisms for maintaining space and favoring dental alignment is to preserve leeway space before permanent second molar irruption. Among the devices with this function, the Nance lingual arch helps maintaining the position of the permanent mandibular molars and incisors after a premature loss of the primary canines. This paper describes the applicability of Nance lingual arch for preserving leeway space, thus contributing for correction of lower anterior crowding.

In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions

OpenAIRE

Ender, Andreas; Attin, Thomas; Mehl, Albert

2016-01-01

STATEMENT OF PROBLEM: Digital impression systems have undergone significant development in recent years, but few studies have investigated the accuracy of the technique in vivo, particularly compared with conventional impression techniques. PURPOSE: The purpose of this in vivo study was to investigate the precision of conventional and digital methods for complete-arch impressions. MATERIAL AND METHODS: Complete-arch impressions were obtained using 5 conventional (polyether, POE; vinylsilox...

Integration of digital dental casts in cone-beam computed tomography scans

NARCIS (Netherlands)

Rangel, F.A.; Maal, T.J.J.; Berge, S.J.; Kuijpers-Jagtman, A.M.

2012-01-01

Cone-beam computed tomography (CBCT) is widely used in maxillofacial surgery. The CBCT image of the dental arches, however, is of insufficient quality to use in digital planning of orthognathic surgery. Several authors have described methods to integrate digital dental casts into CBCT scans, but all

Anchorage onto deciduous teeth: effectiveness of early rapid maxillary expansion in increasing dental arch dimension and improving anterior crowding

OpenAIRE

Mutinelli, Sabrina; Manfredi, Mario; Guiducci, Antonio; Denotti, Gloria; Cozzani, Mauro

2015-01-01

Background Anchorage onto permanent dentition is a common procedure in rapid maxillary expansion. However, replacing first permanent molars with the second deciduous molars seems to be an option to reduce some negative side effects during orthodontic treatment. The purpose of this study was to evaluate the dental effect of rapid maxillary expansion with anchorage exclusively onto deciduous teeth performed in the first period of transition. Methods Twenty patients with a lateral cross-bite tre...

Comparative analysis of 3D data accuracy of single tooth and full dental arch captured by different intraoral and laboratory digital impression systems.

Science.gov (United States)

Ryakhovskiy, A N; Kostyukova, V V

2016-01-01

The aim of this study was to compare the accuracy of digital impressions taken by different intraoral and laboratory scanners. For this purpose a synthetic jaw model with prepared tooth was scanned using intraoral scanning systems: 3D Progress (MHT S.P.A., IT - MHT Optic Research AG, CH); True Definition (3M ESPE, USA); Trios (3Shape A/S, DNK); CEREC AC Bluecam, CEREC Omnicam (Sirona Dental System GmbH, DE); Planscan (Planmeca, FIN); and laboratory scanning systems: s600 ARTI (Zirkonzahn GmbH, IT); Imetric Iscan D104, CH); D900 (3Shape A/S, DNK); Zfx Evolution (Zfx GmbH, DE) (each n=10). Reference-scanning was done by ATOS Core (GOM mbH, DE). The resulting digital impressions were superimposed with the master-scan. The measured deviations by points (trueness) for intraoral scanners were: True Definition - 15.0±2.85 μm (single tooth) and 45.0±19.11 µm (full arch); Trios - 17.1±1.44 and 58.8±27.36 µm; CEREC AC Bluecam - 22.3±5.58 and 20.3±4.13 µm; CEREC Omnicam - 25.0±1.06 and 78.5±27.03 µm; 3D Progress - 26.4±5.75 and 213.5±47.44 µm; Planscan - 54.6±11.58 and 205.2±21.73 µm. For laboratory scanners: Imetric Iscan D104 - 10.2±0.87 μm (stamp) and 65.3±5.36 µm (full arch); Zfx Evolution - 12.8±0.83 and 66.4±2.80 µm; Zirkonzahn s600 ARTI - 15.1±1.36 and 65.9±1.33 µm; 3Shape D900 - 19.9±0.53 and 63.6±0.83 µm. Precision was: True Definition - 19.9±2.77 μm (single tooth) and 40.1±11.04 µm (full arch); Trios - 25.8±2.49 and 69.9±18.95 µm; CEREC AC Bluecam - 36.4±2.78 and 46.6±3.44 µm; CEREC Omnicam - 37.6±3.29 and 76.2±13.36 µm; 3D Progress - 76.9±11.04 and 102.2±8.06 µm; Planscan - 74.3±6.58 and 93.9±15.32 µm. For laboratory scanners: Imetric Iscan D104 - 11.7±4.39 μm (stamp) and 31.2±5.58 µm (full arch); Zfx Evolution - 8.4±0.49 and 24.8±3.98 µm; Zirkonzahn s600 ARTI - 13.4±6.74 and 20.7±4.34 µm; 3Shape D900 - 10.4±0.93 and 17.8±0.62 µm. Whole deviation of the dental arch was: 3D Progress - 98.0±5.70 µm

Association between Childhood Dental Experiences and Dental Fear among Dental, Psychology and Mathematics Undergraduates in Brazil

Directory of Open Access Journals (Sweden)

Júnia M. Serra-Negra

2012-12-01

Full Text Available The aim of the present study was to evaluate the association between childhood dental experiences and dental fear in adulthood among dentistry, psychology and mathematics undergraduate students. A cross-sectional study of 1,256 students from the city of Belo Horizonte, Brazil, was performed. Students responded to the Brazilian version of the Dental Fear Survey (DFS and a questionnaire regarding previous dental experiences. Both the DFS and the questionnaire were self-administered. Association was tested using descriptive, bivariate and multivariate linear regression analysis, with a 5% significance level. Dentistry undergraduates reported lower scores than psychology (p < 0.001 and mathematics undergraduates (p < 0.05 for all three dimensions of the DFS. Negative dental experiences in childhood was associated with dimensions of Avoidance (B = 2.70, p < 0.001, Physiological arousal (B = 1.42, p < 0.001 and Fears of specific stimuli/situations (B = 3.44, p < 0.001. The reason for first visit to dentist was associated with dimensions of Physiological arousal (B = 0.76, p < 0.01 and Fears of specific stimuli/situations (B = 1.29, p < 0.01. Dentists should be encouraged to evaluate the dental fear of their patients before treatment. The DFS has been found to be an effective instrument for this purpose.

Thin-plate spline analysis of arch form in a Southern European population with an ideal natural occlusion.

Science.gov (United States)

Camporesi, Matteo; Franchi, Lorenzo; Baccetti, Tiziano; Antonini, Antonino

2006-04-01

The purpose of the present study was to identify the mean configuration of the clinical arch form in a sample of Southern European subjects with ideal natural occlusion by means of Procrustes analysis, and to compare the identified configuration with 10 commercially produced arch forms by means of thin-plate spline (TPS) analysis. The sample comprised the study casts of 50 subjects (26 males and 24 females). The mean age of the sample was 26 years +/- 4 years. All subjects were young Caucasian adults of Southern European ancestry, and presented with an ideal natural occlusion. The three-dimensional (3D) co-ordinates of all dental points (facial axis points) were digitized using a 3D electromagnetic digitizer. The morphometric technique of TPS analysis with permutation tests was used to compare the configurations of landmarks in the various specimens. No sexual dimorphism was found for either upper or lower arch forms when the shape of the arches was assessed independently from size. The commercially available arch form that showed the least, though statistically significant, shape difference with respect to the average calculated configuration was the Brader arch form.

Effect of Polyvinyl Siloxane Viscosity on Accuracy of Dental Implant Impressions

Directory of Open Access Journals (Sweden)

Ahmad Ghahremanloo

2017-02-01

Full Text Available Objectives: The aim of this study was to compare the accuracy of dental implant impressions obtained by a combination of different impression techniques and viscosities of polyvinyl siloxane (PVS.Materials and Methods: Four parallel fixtures were placed between mental foramina in a master model of lower dental arch. Three different viscosities (putty/light body, medium body/light body, and monophase: heavy body and direct and indirect techniques (six groups were used, and seven impressions were obtained from each group (n=42. To measure the accuracy of impressions, drift, horizontal, and vertical angles of the implants, as well as the hex rotation of the implants in casts were evaluated using a digitizer device (1μm accuracy, in comparison with master arch. Data were analyzed using five-factor two-way ANOVA and Tukey’s post-hoc test.Results: The accuracy of impressions was assessed and the results showed that direct technique was not significantly different from indirect technique (P>0.05. Also, there were no significant differences between the mentioned viscosities except for the horizontal angle (P=0.006.Conclusions: Viscosity of impression materials is of high significance for the accuracy of dental impressions.Keywords: Dental Materials; Dental Implants; Dental Impression Technique; Viscosity; Vinyl Polysiloxane; Dimensional Measurement Accuracy

Correlation between the distance of maxillary central incisors and incisive papilla in different arch form

Directory of Open Access Journals (Sweden)

Nur Ateyya Natasha Mohd Zali

2018-01-01

Full Text Available In edentulous treatment, relocation of anterior teeth in the preexisting natural position is the utmost importance. It is necessary to refer to the significant anatomical landmarks, one of them is incisive papilla. To make it more efficient both functionally and biologically, the teeth were arranged in particular geometric manner known as a dental arch. The author has chosen to conducted the research among the Malay race represented by the Malay undergraduate students. The purpose of this study was to evaluate the correlation between the distance of maxillary central incisors and incisive papilla (CI-IP in different arch form and gender. Maxillary impressions of 34 dentate individuals were taken, and the measurements were performed using a digital caliper. The results showed the CI-IP distance was ranging between 7.65 to 9.90 mm, with the average of 8.77 mm. There was no significant difference of the CI-IP distance between male and female regardless of their arch forms (p>0.05. Individuals with ovoid and tapered arch form, however, showed a significant difference of the CI-IP distance between male and female (p0.05. It can be concluded that gender factor was irrelevant towards the CI-IP distance regardless of the individual arch form. However, there was a correlation between the CI-IP distance in different arch forms in both male and female sample.

Differences in the Microbial Colonization Among Arch Wire Types, Gauges and Cross Sections

Directory of Open Access Journals (Sweden)

Reem A. Rafeeq

2018-02-01

Full Text Available Background: The presence of orthodontic materials in the oral cavity represent a unique surface that can interact with bacteria, leading to pathogenic plaque formation and subsequent enamel demineralization, Streptococcus mutans play an important role in the initiation and progression of dental caries and they are considered the primary cause of bacteriological caries. The objective of this study was to investigate the effect of multiple factors including the type of arch wire, salivary coating, cross section, and wire thickness on the levels of mutans streptococci adherence. Materials and Methods: Two types of arch wire stainless steel and nickel titanium were selected using the following criteria: round and rectangular with gauges 0.014, 0.018, 0.016 × 0.022 and 0.019 × 0.0 25 inches which were subdivided into eight groups. Bacterial adhesion was quantified by a microbial culture technique and the number of adhesive bacteria were analyzed and counted after growth in culture for each group with and without saliva coating at 15 and 60 minutes. Detection of mutans streptococci by saliva-check Mutans test. Results: There was a significant difference between arch wire types in each time interval and the highest bacterial adhesion on the NiTi arch wires with rectangular cross section in the absence of saliva with extended incubation time. Conclusions: The adherence of mutans streptococci in saliva coated wires seems to be low. At increased incubation time, rectangular cross section arch wire showed an increased number of adhering bacteria with less effect on different gauges of the arch wire.

Integration of Digital Dental Casts in Cone-Beam Computed Tomography Scans

OpenAIRE

Rangel, Frits A.; Maal, Thomas J. J.; Bergé, Stefaan J.; Kuijpers-Jagtman, Anne Marie

2012-01-01

Cone-beam computed tomography (CBCT) is widely used in maxillofacial surgery. The CBCT image of the dental arches, however, is of insufficient quality to use in digital planning of orthognathic surgery. Several authors have described methods to integrate digital dental casts into CBCT scans, but all reported methods have drawbacks. The aim of this feasibility study is to present a new simplified method to integrate digital dental casts into CBCT scans. In a patient scheduled for orthognathic ...

Transverse effect of Haas and Hyrax appliances on the upper dental arch in patients with unilateral complete cleft lip and palate: A comparative study

Science.gov (United States)

Façanha, Anna Júlia de Oliveira; Lara, Tulio Silva; Garib, Daniela Gamba; da Silva Filho, Omar Gabriel

2014-01-01

Objective The aim of the present study was to evaluate the transverse effect of rapid maxillary expansion in patients with unilateral complete cleft lip and palate while comparing the Haas and Hyrax appliances. Methods The sample consisted of 48 patients divided into two groups: Group I - 25 patients treated with modified Haas appliance (mean age: 10 years 8 months); and Group II - 23 patients treated with Hyrax appliance (mean age: 10 years 6 months). Casts were taken during pre-expansion and after removal of the appliance at the end of the retention period. The models were scanned with the aid of the 3 Shape R700 3D scanner. Initial and final transverse distances were measured at cusp tips and cervical-palatal points of maxillary teeth by using the Ortho AnalyzerTM 3D software. Results The mean expansion obtained between cusp tips and cervical-palatal points for inter-canine width was 4.80 mm and 4.35 mm with the Haas appliance and 5.91 mm and 5.91 mm with the Hyrax appliance. As for first premolars or first deciduous molars, the values obtained were 6.46 mm and 5.90 mm in the Haas group and 7.11 mm and 6.65 mm in the Hyrax group. With regard to first molars, values were 6.11 mm and 5.24 mm in the Haas group and 7.55 mm and 6.31 mm in the Hyrax group. Conclusion Rapid maxillary expansion significantly increased the transverse dimensions of the upper dental arch in patients with cleft palate, with no significant differences between the Hass and Hyrax expanders. PMID:24945513

Transverse effect of Haas and Hyrax appliances on the upper dental arch in patients with unilateral complete cleft lip and palate: A comparative study

Directory of Open Access Journals (Sweden)

Anna Júlia de Oliveira Façanha

2014-04-01

Full Text Available Objective: The aim of the present study was to evaluate the transverse effect of rapid maxillary expansion in patients with unilateral complete cleft lip and palate while comparing the Haas and Hyrax appliances. Methods: The sample consisted of 48 patients divided into two groups: Group I - 25 patients treated with modified Haas appliance (mean age: 10 years 8 months; and Group II - 23 patients treated with Hyrax appliance (mean age: 10 years 6 months. Casts were taken during pre-expansion and after removal of the appliance at the end of the retention period. The models were scanned with the aid of the 3 Shape R700 3D scanner. Initial and final transverse distances were measured at cusp tips and cervical-palatal points of maxillary teeth by using the Ortho Analyzer(tm 3D software. Results: The mean expansion obtained between cusp tips and cervical-palatal points for inter-canine width was 4.80 mm and 4.35 mm with the Haas appliance and 5.91 mm and 5.91 mm with the Hyrax appliance. As for first premolars or first deciduous molars, the values obtained were 6.46 mm and 5.90 mm in the Haas group and 7.11 mm and 6.65 mm in the Hyrax group. With regard to first molars, values were 6.11 mm and 5.24 mm in the Haas group and 7.55 mm and 6.31 mm in the Hyrax group. Conclusion: Rapid maxillary expansion significantly increased the transverse dimensions of the upper dental arch in patients with cleft palate, with no significant differences between the Hass and Hyrax expanders.

Effects of early and late cheiloplasty on anterior part of maxillary dental arch development in infants with unilateral complete cleft lip and palate

Directory of Open Access Journals (Sweden)

Silvia Valentová-Strenáčiková

2016-02-01

Full Text Available Objectives. The objective of this study is to compare the impact of early and late reconstruction of complete unilateral cleft lip and palate on the growth and development of the front of the dentoalveolar arch. Methods. This study was carried out in the years 2012–2015 at the Clinic of Plastic, Reconstructive and Aesthetic Surgery in Banska Bystrica. Infants with unilateral complete cleft lip and palate were divided into 2 groups according to the timing of lip reconstruction. Group A consisted of infants with early lip reconstruction–realised in the first 14 days of life. Group B consisted of infants with later lip reconstruction–realised in the third month of age. Maxillary dental casts were obtained for each child in four periods–in the first 14 days of life, in the third month, in the sixth month and in the age of one year. These were followed by the identification, measurement and evaluation of anthropometric parameters. Results. Significant differences were occurred after the reconstruction of the lips in linear and angle measurements between infants in the A and B groups. Conclusion. The early surgical reconstruction of the lips in the first 14 days of life has a positive effect on the growth and development of the anterior segment of the dentoalveolar arch. Early lip reconstruction forms a continuous pressure on the frontal segment, resulting in the earlier remedy of anatomical properties and creates appropriate conditions for the best development of this area.

Evolution Characteristic Analysis of Pressure-arch of a Double-arch Tunnel in Water-rich Strata

Directory of Open Access Journals (Sweden)

C. L. Li

2016-03-01

Full Text Available It is of importance to analyze the morphological characterization, the evolution process and the skewed effect of pressure-arch of a double-arch tunnel in the water-rich strata. Taking a buried depth 80 m double-arch tunnel as an example, a computational model of the double-arch tunnel was built by using FLAC3D technique. Then considering some aspects including groundwater conditions, tunnel depth, construction sequences and permeability coefficients, the coupling effect of stress field and seepage field in the pressure-arch of the double-arch tunnel was analyzed. The results show that the thickness of the pressure-arch induced by step-by-step excavation and display a step-descent skewed distribution from the left to the right of the double-arch tunnel. The permeability coefficient has a significant influence on the shape and the skewed effect of the pressure arch. The excavation of the bench method has a better arching condition than that of the expanding method. The abtained results provide a basic reference for the rock reinforcement design and safety construction of double-arch tunnels in the water-rich strata.

Influence of Custom Trays, Dual-Arch Passive, Flexed Trays and Viscosities of Elastomeric Impression Materials on Working Dies

Science.gov (United States)

Kohli, Shivani; Kalsi, Rupali

2016-01-01

Introduction Dual arch impression technique signifies an essential improvement in fixed prosthodontics and has numerous benefits over conventional impression techniques. The accuracy of working dies fabricated from dual arch impression technique remains in question because there is little information available in the literature. Aim This study was conducted to compare the accuracy of working dies fabricated from impressions made from two different viscosities of impression materials using metal, plastic dual arch trays and custom made acrylic trays. Materials and Methods The study samples were grouped into two groups based on the viscosity of impression material used i.e. Group I (monophase), whereas Group II consisted of Dual Mix technique using a combination of light and heavy body material. These were further divided into three subgroups A, B and C depending on the type of impression tray used (metal dual arch tray, plastic dual arch tray and custom made tray). Measurements of the master cast were made using profile projector. Descriptive statistics like mean, Standard Deviation (SD) were calculated for all the groups. One way analysis of variance (ANOVA) was used for multiple group comparisons. A p-value of 0.05 or less was considered statistically significant. Results The gypsum dies obtained with the three types of impression trays using two groups of impression materials were smaller than the master models in dimensions. Conclusion The plastic dual arch trays produced dies which were the least accurate of the three groups. There was no significant difference in the die dimensions obtained using the two viscosities of impression materials. PMID:27437342

Radiographic signs and diagnosis of dental disease

International Nuclear Information System (INIS)

Bellows, J.

1993-01-01

Dental radiographs are critical for the complete assessment and treatment of dental diseases. Dental radiography is commonly used to evaluate congenital dental defects, periodontal disease, orthodontic manipulations, oral tumors, endodontic treatments, oral trauma, and any situation where an abnormality is suspected. Although standard radiographic equipment and film can be used to produce dental radiographs, dental X-ray equipment and film provide superior quality images and greater convenience of animal patient positioning. An understanding of normal dental radiographic anatomy is important when interpreting dental radiographs. Stage III periodontitis is the earliest stage of periodontal disease at which radiographic abnormalities become apparent. Bone loss associated with periodontal disease can be classified as either horizontal or vertical. Periapical radiolucencies can represent granulomas, cysts, or abscesses, whereas periapical radiodensities may represent sclerotic bone or condensing osteitis. Lytic lesions of the bone of the jaw often represent oral neoplasms. Neoplasms also can displace or disrupt teeth in the dental arch. Resorptive lesions can be external or internal and appear as radiolucent areas involving the external surface of the root or the pulp cavity, respectively. Feline dental resorptive lesions, also known as odontoclastic resorptions, are a specific form of dental resorptive lesions unique to cats

Articulated dental cast analysis of asymptomatic and symptomatic populations

Science.gov (United States)

Cordray, Frank E

2016-01-01

Dental instrumentation has long provided insight into the mechanism of musculo-skeletal function of the gnathic system. While large population studies associate dental arch displacement (DAD), especially laterally, with symptoms, mandibular condyle displacement (CD) resulting from DAD has not been targeted as possibly etiologic in the production of common muscle contraction headache (CMCH) and temporo-mandibular dysfunction (TMD). The objective was to evaluate the three-dimensional nature of DAD and CD between the seated condylar position (SCP) and the intercuspal position (ICP) and to compare results derived from large deprogrammed asymptomatic and symptomatic populations. A total of 1 192 sets of dental casts collected from asymptomatic and symptomatic populations were articulated in the SCP. The initial occlusal contact, DAD, and condylar displacement were evaluated for frequency, direction, and magnitude of displacement between the SCP and ICP. The data revealed significant displacement between the SCP and ICP of the condyles (displaced most frequently inferior (down) and posterior (distal)) and substantially increased frequency and magnitude of displacement of the dental arches (with posterior premature occlusal contacts, increased overjet, decreased overbite, midline differences, and occlusal classification changes) in symptomatic subjects. These discrepancies were statistically significant and clinically significant. The data support the concept of increased DAD and CD with dysfunction. Transverse condylar displacement, commonly presenting with dental cross bite, may be associated with CMCH and TMD. Displacement of the mandibular condyle may be an etiologic factor in CMCH and dysfunction of the temporo-mandibular joint. PMID:27357324

Comparison of Total Arch and Partial Arch Transposition During Hybrid Endovascular Repair for Aortic Arch Disease.

Science.gov (United States)

Kang, W C; Ko, Y-G; Oh, P C; Shin, E K; Park, C-H; Choi, D; Youn, Y N; Lee, D Y

2016-08-01

Total arch transposition (TAT) during hybrid endovascular repair for aortic arch disease is believed to allow a better landing zone, but also to be associated with higher peri-operative mortality than partial arch transposition (PAT). Information on this issue is limited. This study was a retrospective analysis. All 53 consecutive patients with aortic arch disease (41 males, mean age 65.0 years) who underwent hybrid endovascular repair with TAT (zone 0, n=20) or PAT (zone 1 or 2, n=33) from 2008 to 2014 were analyzed retrospectively. The peri-operative and late outcomes of these two groups were compared. Baseline characteristics, including EuroSCORE II results, were similar in the two groups. After procedures, peri-operative mortalities and stroke rates were similar in the two groups (5.0% vs. 9.1%, p=1.000, and 10.0% vs. 6.1%, p=.627). Interestingly, all four strokes occurred in patients with a type III aortic arch irrespective of transposition type. Primary success rates (80.0% vs. 69.7%, p=.527) and type I endoleak incidences (20.0% vs. 27.3%, p=.744) were not significantly different. During follow up (mean duration 36.9 months), overall survival (89.7% vs. 87.4% at 1 year and 89.7% vs. 79.3% at 3 years; p=.375) and re-intervention free survival rates (78.6% vs. 92.0% at 1 year; 72.0% vs. 62.2% at 3 years, p=.872) were similar in the two groups. Morbidity and mortality were high within the first year of hybrid endovascular therapy for aortic arch disease, implying that candidates for hybrid procedures need to be selected carefully. Hybrid endovascular repair with TAT was found to have peri-operative mortality, stroke, and long-term survival rates comparable with PAT, so hybrid endovascular repair may be considered, irrespective of type of arch reconstruction, when clinically indicated. Copyright © 2016 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.

Periodontal and dental effects of surgically assisted rapid maxillary expansion, assessed by using digital study models

Science.gov (United States)

Siqueira, Danilo Furquim; Cardoso, Mauricio de Almeida; Capelozza, Leopoldino; Goldenberg, Dov Charles; Fernandes, Mariana dos Santos

2015-01-01

OBJECTIVE: The present study assessed the maxillary dental arch changes produced by surgically assisted rapid maxillary expansion (SARME). METHODS: Dental casts from 18 patients (mean age of 23.3 years) were obtained at treatment onset (T1), three months after SARME (T2) and 6 months after expansion (T3). The casts were scanned in a 3D scanner (D-250, 3Shape, Copenhagen, Denmark). Maxillary dental arch width, dental crown tipping and height were measured and assessed by ANOVA and Tukey's test. RESULTS: Increased transversal widths from T1 and T2 and the maintenance of these values from T2 and T3 were observed. Buccal teeth tipping also showed statistically significant differences, with an increase in all teeth from T1 to T2 and a decrease from T2 to T3. No statistically significant difference was found for dental crown height, except for left first and second molars, although clinically irrelevant. CONCLUSION: SARME proved to be an effective and stable procedure, with minimum periodontal hazards. PMID:26154457

Incisor and molar overjet, arch contraction, and molar relationship in the mixed dentition in repaired complete unilateral cleft lip and palate: A qualitative and quantitative appraisal.

Science.gov (United States)

Disthaporn, Suteeta; Suri, Sunjay; Ross, Bruce; Tompson, Bryan; Baena, Diogenes; Fisher, David; Lou, Wendy

2017-07-01

To compare the mixed dentition incisor and molar overjet, severity of contraction of the dental arch, and the sagittal molar relationship on the cleft side vs the noncleft side in children with repaired complete unilateral cleft of the lip and palate (UCLP). Orthodontic records taken prior to orthodontic preparation for alveolar bone grafting were screened to select study casts from patients with nonsyndromic repaired complete UCLP who did not have mandibular skeletal or dental asymmetry. The study sample comprised dental casts from 74 children aged 8.9 ± 1 years. Standardized digital photographs were acquired at 1:1 magnification. A coordinate system was developed using digital image-processing software (Photoshop CS4 and Adobe Illustrator). Incisor and molar overjet, Angle's classification, and arch contraction were recorded. Descriptive statistics, paired t-tests, and kappa statistics were used to compare the cleft and noncleft sides. A negative overjet of -1 to -5 mm was often present at the incisors, with greater frequency and magnitude on the cleft side. Class II molar relation was more frequent on the cleft side (61.1%) than on the noncleft side (47.2%). Significantly greater contraction of the cleft side deciduous canine and deciduous first molar was noted, while the difference was very minor at the first permanent molar. Cleft side maxillary arch contraction was most severe in the deciduous canine and first deciduous molar region and progressively less severe in the posterior region of the arch. A greater frequency and severity of negative overjet and Class II molar relationship was seen on the cleft side.

Persistent fifth arch anomalies - broadening the spectrum to include a variation of double aortic arch vascular ring

Energy Technology Data Exchange (ETDEWEB)

Newman, Beverley; Chan, Frandics [Stanford Children' s Hospital and Stanford University, Department of Radiology, Stanford, CA (United States); Hanneman, Kate [University of Toronto, Department of Medical Imaging, Toronto, ON (Canada)

2016-12-15

Fifth arch anomalies are rare and complex and frequently misdiagnosed or mistaken for other entities. We report a double arch vascular ring that is thought to consist of right fourth arch and left fifth arch components, a previously undescribed persistent fifth arch variant. The currently recognized spectrum and classification of fifth arch vascular anomalies are expanded along with illustrative images to justify the proposed changes. Reviewing and expanding the classification of fifth arch anomalies to include a double arch ring variant will promote recognition, correct diagnosis and appropriate management of these anomalies. (orig.)

Biometrics of the primary dentition in a Nigerian sample | Yemitan ...

African Journals Online (AJOL)

Objective: The purpose of this study was to determine normative values of crown dimensions, arch dimensions, and amount of interdental space in the primary dentition of Nigerian children. Method: Dental casts from alginate impressions obtained from 125 randomly selected nursery school children (65 boys, 60 girls) aged ...

Oral cavity evaluation and dental chart registration of coati (Nasua nasua) in captivity

OpenAIRE

Freitas, Elisângela P; Rahal, Sheila Canevese; Teixeira, Carlos Roberto; Teixeira, Rodrigo Hidalgo Friciello; Mendes, Guilherme Martines Teixeira; Gioso, Marco Antonio

2008-01-01

The aims of this study were to develop a dental chart, evaluate any oral cavity disease, develop gypsum models of the dental arches, and to register the occlusions found in coatis (Nasua nasua) in captivity. Formulation of the dental chart was assisted by intraoral radiographs from the head of an adult coati cadaver of the same species with the following dental formula: I 3/3, C 1/1, P 4/3, M 2/2. Seven live coatis of the Nasua nasua species were evaluated. Five of the seven coatis presented ...

Occlusal characteristics and prevalence of associated dental anomalies in the primary dentition.

Science.gov (United States)

Lochib, Seema; Indushekar, K R; Saraf, Bhavna Gupta; Sheoran, Neha; Sardana, Divesh

2015-06-01

Morphological variations in primary dentition are of great concern to a pediatric dentist as it may pose clinical problems like dental caries, delayed exfoliation and also anomalies in the permanent dentition, such as impaction of successors, supernumerary teeth, permanent double teeth or aplasia of teeth. The present study was conducted to investigate the presence of dental anomalies in the primary dentition of 1000 schoolchildren in the 3-5 year-old age group in Faridabad. One-thousand schoolchildren were examined using Type III examination (WHO, 1997) for primary molar relationship, occlusal characteristics, primate spaces, physiological spaces and other anomalies of teeth, including number and morphology. The prevalence of physiological spaces in maxillary and mandibular arches was 50.9% and 46.7%, respectively, whereas primate spaces were found in 61.7% of the children in the maxillary arch and 27.9% in the mandibular arch. The prevalence of unilateral anterior and posterior cross-bite was 0.1% and 0.8%, respectively, in the present study. The prevalence of hypodontia in the primary dentition was found to be 0.4% and the prevalence of fusion and gemination in the present study was 0.5%. Double teeth (fusion and gemination) and hypodontia were the most common dental anomalies found in the primary dentition in the present study. Copyright © 2014 Ministry of Health, Saudi Arabia. Published by Elsevier Ltd. All rights reserved.

Profile of Dental Caries in Teenagers in Mumbai City Visiting Nair Hospital Dental College.

Science.gov (United States)

Banga, Kulvinder Singh; Rastogi, Sweta; Mistry, Siddhi

2018-01-01

Witnessing the alarming rise and pattern of distribution of dental caries worldwide, the need of the hour is to take initiative in preventing the spread further. This survey was conducted to determine the occurrence of dental caries and its associated risk factors in teenagers of Mumbai city who visited Nair Hospital Dental College. The objective of the study was to analyze the current dietary habits, oral hygiene status, and the number of sugar exposures in teenagers by a questionnaire followed by clinical examination which was carried out using International Caries Detection and Assessment System (ICDAS) II to detect the profile of dental caries. The data obtained from the questionnaire and examination were analyzed using Chi-square test. The survey showed that, out of the 300 teenagers examined, 67% visited the dentist only when they were symptomatic. Around 60% consumed sweets 2-3 times/day. A major percentage, 89%, consumed sweets irrespective of meal time and 52% consumed aerated drinks often. Only 16% used appropriate brushing techniques and 93% were not aware if their toothpaste was fluoridated. ICDAS II revealed that a total number of teeth requiring preventive treatment ranged from 8.3% to 14% and total number of teeth requiring definitive treatment ranged from 36% to 48%. It was found that tooth most commonly treated was 36 followed by tooth number 46 showing that the incidence of caries is higher in lower arch. Most of the teenagers had a high rate of sweet consumption in between meals and poor knowledge of brushing techniques, fluoridated toothpaste, interdental aids, and mouthrinses. ICDAS showed a high incidence of caries in teenagers, especially in the lower arch. ICDAS II showed good accuracy in differentiating between noncavitated and cavitated lesions which helps to provide an accurate treatment plan for teenagers so that it prevents the progression of the lesion.

Prosthodontic decision-making relating to dentitions with compromised molars: the perspective of Swedish General Dental Practitioners.

Science.gov (United States)

Korduner, E-K; Collin Bagewitz, I; Vult von Steyern, P; Wolf, E

2016-12-01

The aim of this investigation was to study the clinical prosthodontic decision-making process relating to dentitions with compromised molars among Swedish general dental practitioners (GDPs). Eleven Swedish GDPs were purposively selected, and all agreed to participate. Then, in-depth, semi-structured interviews were conducted and covered treatment considerations concerning two authentic patient cases, initially with complete dental arches, and later, a final treatment based on a shortened dental arch (SDA) was discussed. The cases involved patients with compromised teeth situated mainly in the molar regions. One patient suffered from extensive caries and the other from severe periodontal disease. Qualitative content analysis was used to analyse the data. In the systematic analysis, two main categories were identified: holistic and functional approach. Among the interviewed GDPs, focus was put on patients' needs, background history and motivation for treatment as well as the preservation of molar support. Within the limitations of this study, the following can be concluded: keeping a dental arch with molars seems to be important to Swedish general dental practitioners. The SDA concept does not seem to have a substantial impact on the prosthodontic decision-making relating to dentitions with compromised molars. The dentist's experiences, as well as colleagues' or consulting specialist advice together with aetiological factors and the patient's individual situation, influence the decision-making more than the SDA concept. The conflicting results in the prosthetic decision-making process concerning the relevance of age and the need for molar support need further investigation, for example based on decisions made in the dentist's own clinical practice. © 2016 John Wiley & Sons Ltd.

Oral cavity evaluation and dental chart registration of coati (Nasua nasua) in captivity.

Science.gov (United States)

Freitas, Elisângela P; Rahal, Sheila C; Teixeira, Carlos R; Teixeira, Rodrigo H F; Mendes, Guilherme M; Gioso, Marco A

2008-06-01

The aims of this study were to develop a dental evaluate any oral cavity disease, develop gypsum models of the dental arches, and to register the occlusions found in coatis (Nasua nasua) in captivity Formulation of the dental chart was assisted by intraoral radiographs from the head of an adult coati cadaver of the same species with the following dental formula.: I 3/3, C 1/1, P 4/3, M 2/2. Seven live coatis of the Nasua nasua species were evaluated. Five of the seven coatis presented with various dental abnormalities as follows: dental plaque (71.4 0%), gingivitis (71.4 %), periodontitis (57.1 %), dental stain (42.9 %), dental abrasion (57.1 %), dental fracture (57.1 %), pulp exposure (42.9 %), malocclusion (57.1 %) and supernumerary teeth (14.2 %).

Neonatal aortic arch reconstruction avoiding circulatory arrest and direct arch vessel cannulation.

Science.gov (United States)

Tchervenkov, C I; Korkola, S J; Shum-Tim, D; Calaritis, C; Laliberté, E; Reyes, T U; Lavoie, J

2001-11-01

Aortic arch reconstruction in neonates routinely requires deep hypothermic circulatory arrest. We reviewed our experience with techniques of continuous low-flow cerebral perfusion (LFCP) avoiding direct arch vessel cannulation. Eighteen patients, with a median age of 11 days (range 1 to 85 days) and a mean weight of 3.2 +/- 0.8 kg, underwent aortic arch reconstruction with LFCP. Seven had biventricular repairs with arch reconstruction, 9 underwent the Norwood operation and 2 had isolated arch repairs. In 1 Norwood and 7 biventricular repair patients, LFCP was maintained by advancing the cannula from the distal ascending aorta into the innominate artery. In 8 of 9 Norwood patients, LFCP was maintained by directing the arterial cannula into the pulmonary artery confluence and perfusing the innominate artery through the right modified Blalock-Taussig shunt fully constructed before cannulation for cardiopulmonary bypass. In 2 patients requiring isolated arch reconstruction, the ascending aorta was cannulated and the cross-clamp was applied just distal to the innominate artery. LFCP was maintained at 0.6 +/- 0.2 L x min(-1) x m(-2) for 41.0 +/- 13.9 minutes at 18.5 degrees C +/- 1.1 degrees C. In 10 of the 18 patients, blood pressure during LFCP was 15 +/- 8 mm Hg remote from the innominate artery (left radial, umbilical or femoral arteries). In 8 of the 18 patients, right radial pressure during LFCP was 24 +/- 10 mm Hg. The mean mixed-venous saturation was 79.8% +/- 10% during LFCP. Two patients had preoperative seizures, whereas none had seizures postoperatively. One patient died. Neonatal aortic arch reconstruction is possible without circulatory arrest or direct arch vessel cannulation. These techniques maintained adequate mixed-venous oxygen saturations with no associated adverse neurologic outcomes.

An anthropometric analysis of facial height, arch length, and palatal rugae in the Indian and Nepalese population.

Science.gov (United States)

Kallianpur, Shreenivas; Desai, Ami; Kasetty, Sowmya; Sudheendra, Us; Joshi, Prathamesh

2011-01-01

A country such as India abounds with diverse population groups with distinct anthropometric characteristics. Among these, numerous Nepalese population groups are present in different states of India comprising one of the most common immigrant races. The aim of the study is to compare two distinct races, Indians and Nepalese on the basis of facial height proportions, arch length and palatal rugae patterns and assess their significance in racial identification. A total of 120 subjects comprising of 60 Indians and 60 Nepalese were selected, with each group including 30 males and 30 females. Facial heights were measured using sliding digital calipers, arch lengths with the help of a brass wire and rugae patterns were traced on dental casts obtained with alginate impressions. Facial height measurements did not give significant results for racial or gender identification of given races. Differences between arch length parameters were found to be significant between the two population groups. Secondary and fragmentary palatal rugae forms were found to be more common in Nepalese than Indians. The Indian and Nepalese have similar anthropometric characteristics with regard to facial height. However, arch length and palatal rugae characteristics vary between the two races.

Surgical modification for preventing a gothic arch after aortic arch repair without the use of foreign material.

Science.gov (United States)

Seo, Dong-Man; Park, Jiyoung; Goo, Hyun Woo; Kim, Young Hwue; Ko, Jae-Kon; Jhang, Won Kyoung

2015-04-01

Systemic hypertension is the main late complication after arch reconstruction in patients with arch obstruction. Gothic arch geometry is suspected to be one of its possible causes. Accordingly, we evaluated here if a modified arch repair technique using an autologous pulmonary patch is effective in preventing gothic arch development. Fifty infants who underwent arch repair with either a modified (n = 17) or conventional (n = 33) technique between January 2006 and August 2012 by a single surgeon were retrospectively reviewed. Arch geometry was compared using three categories (gothic, crenel or roman), classified by the height/width (H/W) ratio and the arch angle measured in computed tomography. No gothic arch geometry was observed in the modified group, whereas it was observed in 9 cases in the conventional group (P = 0.005). Moreover, reintervention for arch restenosis was performed only in the conventional group (n = 4; P = 0.29). No associated complications were observed, although the selective cerebral perfusion time was longer in the modified group than in the conventional group (28.5 ± 6.2 vs 17.1 ± 9.9 min; P gothic arch geometry, but also as equally safe in terms of early clinical outcomes as conventional arch reconstruction techniques. © The Author 2015. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Effect of Polyvinyl Siloxane Viscosity on Accuracy of Dental Implant Impressions

OpenAIRE

Ghahremanloo, Ahmad; Seifi, Mahdieh; Ghanbarzade, Jalil; Abrisham, Seyyed Mohammad; Javan, Rashid Abdolah

2017-01-01

Objectives: The aim of this study was to compare the accuracy of dental implant impressions obtained by a combination of different impression techniques and viscosities of polyvinyl siloxane (PVS).Materials and Methods: Four parallel fixtures were placed between mental foramina in a master model of lower dental arch. Three different viscosities (putty/light body, medium body/light body, and monophase: heavy body) and direct and indirect techniques (six groups) were used, and seven impressions...

RARE BRANCHIAL ARCH ANOMALIES

Directory of Open Access Journals (Sweden)

Jayanta Kumar

2016-03-01

Full Text Available AIM Amongst the branchial arch anomalies third arch anomaly occurs rarely and more so the fourth arch anomalies. We present our experience with cases of rare branchial arch anomalies. PATIENTS AND METHODS From June 2006 to January 2016, cases having their external opening in the lower third of sternocleidomastoid muscle with the tract going through thyroid gland and directing to pyriform sinus (PFS or cysts with internal opening in the PFS were studied. RESULTS No fourth arch anomaly was encountered. One cyst with internal opening which later on formed a fistula, three fistulae from beginning and two sinuses were encountered. The main stay of diagnosis was the fistula in the PFS and the tract lying posterior to the internal carotid artery. Simple excision technique with a small incision around the external opening was done. There was no recurrence. CONCLUSION Third arch fistula is not very rare as it was thought. Internal fistula is found in most of the cases. Though radiological investigations are helpful, fistulae can be diagnosed clinically and during operation. Extensive operation of the neck, mediastinum and pharynx is not required.

Cable strengthened arches

NARCIS (Netherlands)

Kamerling, M.W.

2013-01-01

The structural efficiency of arches, subjected to several variable loads, can be increased by strengthening these arches with cables. For these structures it can be necessary, especially in case the permanent load is small, to post-tension the cables to avoid any compression acting on the cables. A

Effect of Polyvinyl Siloxane Viscosity on Accuracy of Dental Implant Impressions.

Science.gov (United States)

Ghahremanloo, Ahmad; Seifi, Mahdieh; Ghanbarzade, Jalil; Abrisham, Seyyed Mohammad; Javan, Rashid Abdolah

2017-01-01

The aim of this study was to compare the accuracy of dental implant impressions obtained by a combination of different impression techniques and viscosities of polyvinyl siloxane (PVS). Four parallel fixtures were placed between mental foramina in a master model of lower dental arch. Three different viscosities (putty/light body, medium body/light body, and monophase: heavy body) and direct and indirect techniques (six groups) were used, and seven impressions were obtained from each group (n=42). To measure the accuracy of impressions, drift, horizontal, and vertical angles of the implants, as well as the hex rotation of the implants in casts were evaluated using a digitizer device (1μm accuracy), in comparison with master arch. Data were analyzed using five-factor two-way ANOVA and Tukey's post-hoc test. The accuracy of impressions was assessed and the results showed that direct technique was not significantly different from indirect technique (P>0.05). Also, there were no significant differences between the mentioned viscosities except for the horizontal angle (P=0.006). Viscosity of impression materials is of high significance for the accuracy of dental impressions.

Difference between manual and digital measurements of dental arches of orthodontic patients.

Science.gov (United States)

Jiménez-Gayosso, Sandra Isabel; Lara-Carrillo, Edith; López-González, Saraí; Medina-Solís, Carlo Eduardo; Scougall-Vilchis, Rogelio José; Hernández-Martínez, César Tadeo; Colomé-Ruiz, Gabriel Eduardo; Escoffié-Ramirez, Mauricio

2018-06-01

The objective of this study was to compare the differences between the measurements performed manually to those obtained using a digital model scanner of patients with orthodontic treatment.A cross-sectional study was performed in a sample of 30 study models from patients with permanent dentition who attended a university clinic between January 2010 and December 2015. For the digital measurement, a Maestro 3D Ortho Studio scanner (Italy) was used and Mitutoyo electronic Vernier calipers (Kawasaki, Japan) were used for manual measurement. The outcome variables were the measurements for maxillary intercanine width, mandibular intercanine width, maxillary intermolar width, mandibular intermolar width, overjet, overbite, maxillary arch perimeter, mandibular arch perimeter, and palate height. The independent variables, besides age and sex, were a series of arc characteristics. The Student t test, paired Student t test, and Pearson correlation in SPSS version 19 were used for the analysis.Of the models, 60% were from women. Two of nine measurements for pre-treatment and 6 of 9 measurements for post-treatment showed a difference. The variables that were different between the manual and digital measurements in the pre-treatment were maxillary intermolar width and palate height (P manually and digitally showed certain similarities for both vertical and transverse measurements. There are many advantages offered to the orthodontist, such as easy storage; savings in time and space; facilitating the reproducibility of information; and conferring the security of not deteriorating over time. Its main disadvantage is the cost.

Idiopathic dental pulp calcifications in a tertiary care setting in South India.

Science.gov (United States)

Satheeshkumar, P S; Mohan, Minu P; Saji, Sweta; Sadanandan, Sudheesh; George, Giju

2013-01-01

Dental pulp calcifications are unique and represent the dental pulp regenerative process. Dental pulp calcifications are sometimes routine findings in oral radiographs and may later serve as an important diagnostic criterion for a hidden aspect of systemic illness. The purpose of this study was to assess the patterns and prevalence of idiopathic dental pulp calcifications in a tertiary care setting in South India. A total of 227 patients were included in the study fulfilling the inclusion criteria. Age range of the study population was from 15 to 70 years. Teeth were examined under digital panoramic radiograph. The presence or absence of pulp stones was recorded. The presence of pulp stone were categorized according to the types classified as Type I, Type IA, Type II, Type IIA, Type II B, and Type III. The frequency of occurrence of pulp stones with sex, tooth type, dental arches, and types were compared with the types of calcification. Total no. of patients with pulpal calcification were 227 [females 133 (58.59%) and males 94 (41.40%)]. The most common type between both sexes was Type I (48%). Total no. of teeth with calcification was 697; maxilla (48%), mandible (52%). The prevalence of pulp stone was found to be higher in the molars in both the arches. Most no. of pulp stones are reported at the third and fourth decade of life. Idiopathic dental pulp calcifications are incidental radiographic findings of the pulp tissue and also may be an indicator of underlying disease.

Immediate placement of dental implants in the mandible

Directory of Open Access Journals (Sweden)

Gurkar Haraswarupa Puttaraju

2013-01-01

Full Text Available This case describes extraction of teeth in the mandibular arch, i.e., 41 42 43 44 45 51 52 53 54 55 56 57 58 (grade two mobility, followed by immediate placement of four dental implants (3i biomet, two in the 45 55 region and two dental implants in 12 21 region. A prefabricated provisional mandibular denture was immediately placed. The purpose of immediate placement was to aid the patient resume his professional duties the next day itself along with esthetic and functional comfort, psychological well-being and most importantly preserving the remaining tissue in a healthy condition.

Right circumflex retro-oesophageal aortic arch with coarctation of a high-positioned right arch

International Nuclear Information System (INIS)

Ahn, Kyung-Sik; Yong, Hwan Seok; Woo, Ok Hee; Kang, Eun-Young; Lee, Joo-Won

2007-01-01

We present a rare case of right circumflex retro-oesophageal aortic arch with coarctation of a high-positioned right arch. A 7-month-old boy presented with a cardiac murmur. Cardiac situs was normal and there was no evidence of an intracardiac shunt or patent ductus arteriosus. MR aortography revealed a right aortic arch that was high-positioned, tortuous and narrowed. This right aortic arch crossed the midline behind the oesophagus and continued as a left-sided descending aorta. The left common carotid and subclavian arteries arose from a large branching vascular structure that derived from the top of the left-sided descending aorta. The right common carotid artery arose from the ascending aorta. The proximal portion of the right common carotid artery showed very severe stenosis and poststenotic dilatation. The right subclavian artery originated distal to the narrowed and tortuous segment of the aortic arch. (orig.)

Analysis of dental arch relationships in Swedish unilateral cleft lip and palate subjects: 20-year longitudinal consecutive series treated with delayed hard palate closure.

Science.gov (United States)

Lilja, Jan; Mars, Michael; Elander, Anna; Enocson, Lars; Hagberg, Catharina; Worrell, Emma; Batra, Puneet; Friede, Hans

2006-09-01

To evaluate the dental arch relationships for a consecutive series from Goteborg, Sweden, who had delayed hard palate closure. Retrospective study. Sahlgrenska University Hospital, Goteborg, Sweden. The dental study models of 104 consecutive unilateral cleft lip and palate subjects. The study cohort was born between 1979 and 1994. Longitudinal records were available at ages 5 (n = 94), 10 (n = 97), 16 (n = 59), and 19 years (n = 46). Five assessors rated models according to the GOSLON Yardstick on two separate occasions each. These patients had been operated upon according to the Goteborg protocol of delayed hard palate closure (at age 8 years). 85% of subjects were rated in groups 1 and 2 (excellent or very good outcome), 12% were rated in group 3 (satisfactory), and 3% were assigned to group 4 (poor). No patients presented in Group 5 (very poor). Weighted kappa statistics for double determination of Yardstick allocation for five assessors demonstrated values between .65 and .90 for interrater agreement (good/very good) and between .70 and .90 for intrarater agreement (very good). Delayed hard palate closure as practiced in Goteborg since 1979 has produced the best GOSLON Yardstick ratings in a consecutive series of patients ever recorded worldwide, since the Yardstick was first used in 1983. However, it is noteworthy that a new protocol has been introduced in Goteborg since 1994, in which hard palate closure is done at 3 years due to concerns regarding speech.

Aortic arch malformations

Energy Technology Data Exchange (ETDEWEB)

Kellenberger, Christian J. [University Children' s Hospital, Department of Diagnostic Imaging, Zuerich (Switzerland)

2010-06-15

Although anomalies of the aortic arch and its branches are relatively uncommon malformations, they are often associated with congenital heart disease. Isolated lesions may be clinically significant when the airways are compromised by a vascular ring. In this article, the development and imaging appearance of the aortic arch system and its various malformations are reviewed. (orig.)

Aortic arch malformations

International Nuclear Information System (INIS)

Kellenberger, Christian J.

2010-01-01

Although anomalies of the aortic arch and its branches are relatively uncommon malformations, they are often associated with congenital heart disease. Isolated lesions may be clinically significant when the airways are compromised by a vascular ring. In this article, the development and imaging appearance of the aortic arch system and its various malformations are reviewed. (orig.)

Profile of dental caries in teenagers in Mumbai City visiting Nair Hospital Dental College

Directory of Open Access Journals (Sweden)

Kulvinder Singh Banga

2018-01-01

Full Text Available Background: Witnessing the alarming rise and pattern of distribution of dental caries worldwide, the need of the hour is to take initiative in preventing the spread further. Aim: This survey was conducted to determine the occurrence of dental caries and its associated risk factors in teenagers of Mumbai city who visited Nair Hospital Dental College. Materials and Methods: The objective of the study was to analyze the current dietary habits, oral hygiene status, and the number of sugar exposures in teenagers by a questionnaire followed by clinical examination which was carried out using International Caries Detection and Assessment System (ICDAS II to detect the profile of dental caries. Statistical Analysis: The data obtained from the questionnaire and examination were analyzed using Chi-square test. Results: The survey showed that, out of the 300 teenagers examined, 67% visited the dentist only when they were symptomatic. Around 60% consumed sweets 2–3 times/day. A major percentage, 89%, consumed sweets irrespective of meal time and 52% consumed aerated drinks often. Only 16% used appropriate brushing techniques and 93% were not aware if their toothpaste was fluoridated. ICDAS II revealed that a total number of teeth requiring preventive treatment ranged from 8.3% to 14% and total number of teeth requiring definitive treatment ranged from 36% to 48%. It was found that tooth most commonly treated was 36 followed by tooth number 46 showing that the incidence of caries is higher in lower arch. Conclusion: Most of the teenagers had a high rate of sweet consumption in between meals and poor knowledge of brushing techniques, fluoridated toothpaste, interdental aids, and mouthrinses. ICDAS showed a high incidence of caries in teenagers, especially in the lower arch. ICDAS II showed good accuracy in differentiating between noncavitated and cavitated lesions which helps to provide an accurate treatment plan for teenagers so that it prevents the

Nonlinear Buckling Analysis of Functionally Graded Graphene Reinforced Composite Shallow Arches with Elastic Rotational Constraints under Uniform Radial Load.

Science.gov (United States)

Huang, Yonghui; Yang, Zhicheng; Liu, Airong; Fu, Jiyang

2018-05-28

The buckling behavior of functionally graded graphene platelet-reinforced composite (FG-GPLRC) shallow arches with elastic rotational constraints under uniform radial load is investigated in this paper. The nonlinear equilibrium equation of the FG-GPLRC shallow arch with elastic rotational constraints under uniform radial load is established using the Halpin-Tsai micromechanics model and the principle of virtual work, from which the critical buckling load of FG-GPLRC shallow arches with elastic rotational constraints can be obtained. This paper gives special attention to the effect of the GPL distribution pattern, weight fraction, geometric parameters, and the constraint stiffness on the buckling load. The numerical results show that all of the FG-GPLRC shallow arches with elastic rotational constraints have a higher buckling load-carrying capacity compared to the pure epoxy arch, and arches of the distribution pattern X have the highest buckling load among four distribution patterns. When the GPL weight fraction is constant, the thinner and larger GPL can provide the better reinforcing effect to the FG-GPLRC shallow arch. However, when the value of the aspect ratio is greater than 4, the flakiness ratio is greater than 103, and the effect of GPL's dimensions on the buckling load of the FG-GPLRC shallow arch is less significant. In addition, the buckling model of FG-GPLRC shallow arch with elastic rotational constraints is changed as the GPL distribution patterns or the constraint stiffness changes. It is expected that the method and the results that are presented in this paper will be useful as a reference for the stability design of this type of arch in the future.

Islamic Architecture and Arch

Directory of Open Access Journals (Sweden)

Mohammed Mahbubur Rahman

2015-01-01

Full Text Available The arch, an essential architectural element since the early civilizations, permitted the construction of lighter walls and vaults, often covering a large span. Visually it was an important decorative feature that was trans-mitted from architectural decoration to other forms of art worldwide. In early Islamic period, Muslims were receiving from many civilizations, which they improved and re-introduced to bring about the Renaissance. Arches appeared in Mesopotamia, Indus, Egyptian, Babylonian, Greek and Assyrian civilizations; but the Romans applied the technique to a wide range of structures. The Muslims mastered the use and design of the arch, employed for structural and functional purposes, progressively meeting decorative and symbolic pur-poses. Islamic architecture is characterized by arches employed in all types of buildings; most common uses being in arcades. This paper discusses the process of assimilation and charts how they contributed to other civilizations.

Optimum design of large span concrete filled steel tubular arch bridge based on static, stability and modal analysis

Institute of Scientific and Technical Information of China (English)

赵长军; 胡隽; 徐兴

2002-01-01

A three-dimensional finite element model was established for a large span concrete filled steel tubular (CFST) arch bridge which is currently under construction. The arch rib, the spandrel columns, the prestressed concrete box-beam, the cast-in-situ concrete plate of bridge deck, the steel box-beam and the crossbeams connecting the two pieces of arch ribs, were modeled by three-dimensional Timoshenko beam elements (3DTBE). The suspenders were modeled by three-dimensional cable elements (3DCE). Both geometric nonlinearity and prestress effect could be included in each kind of element. At the same time a second finite element model with the same geometric and material properties excepted for the sectional dimension of arch rib was set up. Static dynamic analyses were performed to determine the corresponding characteristics of the structure. The results showed that the arch rib's axial rigidity could be determined by static analysis. The stability and vibration of this system could be separated into in-plane modes, out-of-plane modes and coupled modes. The in-plane stability and dynamic characteristics are determined by the arch rib's vertical stiffness and that of out-of-plane is determined by the crossbeams' stiffness and arch rib's lateral stiffness mainly. The in-plane stiffness is much greater than that of out-of-plane for this kind of bridge . The effect of geometric nonlinearity and prestress effect on bridge behavior is insignificant.

Electrostatically Tunable Nanomechanical Shallow Arches

KAUST Repository

Kazmi, Syed N. R.

2017-11-03

We report an analytical and experimental study on the tunability of in-plane doubly-clamped nanomechanical arches under varied DC bias conditions at room temperature. For this purpose, silicon based shallow arches are fabricated using standard e-beam lithography and surface nanomachining of a highly conductive device layer on a silicon-on-insulator (SOI) wafer. The experimental results show good agreement with the analytical results with a maximum tunability of 108.14% for 180 nm thick arch with a transduction gap of 1 μm between the beam and the driving/sensing electrodes. The high tunability of shallow arches paves the ways for highly tunable band pass filtering applications in high frequency range.

Orthodontic treatment with preadjusted appliances and low-friction ligatures: experimental evidence and clinical observations.

Science.gov (United States)

Baccetti, Tiziano; Franchi, Lorenzo; Fortini, Arturo

2008-01-01

To describe the features of low-friction ligatures during the leveling and aligning phase of fixed appliance therapy with preadjusted brackets. Experimental in vitro and in vivo studies were carried out to test the performance of the low-friction system with regard to leveling and aligning of the dental arches, as well as to increasing the transverse dimension of the maxillary arch. The outcomes of experimental testing showed that the combination of the low-friction ligatures with the superelastic nickel-titanium wires produced a significantly smaller amount of binding at the bracket/archwire/ligature unit when compared to conventional elastomeric ligatures. The biomechanical consequences of the use of low-friction ligatures were shorter duration of orthodontic treatment during the leveling and aligning phase, concurrent dentoalveolar expansion of the dental arch, and the possibility of using biologically adequate orthodontic forces.

Precast Pearl-Chain concrete arch bridges

DEFF Research Database (Denmark)

Halding, Philip Skov; Hertz, Kristian Dahl; Schmidt, Jacob Wittrup

2015-01-01

A Pearl-Chain Bridge is a closed-spandrel arch bridge consisting of a number of straight pre-fabricated so called Super-Light Deck elements put together in an arch shape by post-tensioning cables. Several Pearl-Chain arches can be positioned adjacent to each other by a crane to achieve a bridge...... of a desired width. On top of the arch is a filling material to level out the surface of the above road. The filling only transfers vertical loads to the arch. The geometry and material properties of Super-Light Decks are presented, and we refer to several fullscale tests of Pearl-Chain arches where...... the technology was used. We also study other important components and details in the Pearl-Chain Bridge concept and review the effects of different types of loads. A theoretical case study of a circular 30 m span Pearl-Chain Bridge is presented showing the influence of a number of parameters: The number of post...

Masonry arches retrofitted with steel reinforced grout materials: In-situ experimental tests and advanced FE simulations

Science.gov (United States)

Bertolesi, Elisa; Carozzi, Francesca Giulia; Milani, Gabriele; Poggi, Carlo

2017-11-01

The paper presents the results of a series of in-situ tests carried out on two masonry arches, one unreinforced and the other reinforced with SRG (Steel Reinforced Grout). The arches are built adopting a peculiar construction technique using common Italian bricks with dimensions 250 × 120 × 55 mm3 and 10 mm thick mortar joints. One of the two arches has been reinforced with an SRG material constituted by an inox grid embedded into a layer of lime mortar, whereas the second one is maintained unreinforced for comparison purposes. The experimental set-up is designed to apply an eccentric vertical load placed at ¼ of the span in a series of loading and unloading cycles up to the failure. The numerical analyses have been performed using a sophisticated heterogeneous micro-modeling technique, where bricks, mortar joints and the strengthening have been modeled separately. Finally, the numerical outcomes have been comparatively assessed with respect to the experimental results and the crack patterns obtained at the end of the tests, showing a satisfactory agreement in terms of the global behavior of the arches and their collapse mechanisms.

Imaging findings in the right aortic arch with mirror image branching of arch vessels: An unusual cause of dysphagia

Directory of Open Access Journals (Sweden)

Guneet Singh

2015-01-01

Full Text Available We report a case of a 72-year-old female with a right aortic arch with mirror-image branching of arch vessels presenting with dysphagia, and characteristic images on barium esophagogram, contrast-enhanced computed tomography scan, and magnetic resonance aortography. Right-sided thoracic aortic arch with mirror-image branching of the brachiocephalic vessels causing dysphagia without associated congenital cardiac anomalies is extremely uncommon. Right-sided aortic arch is a rare congenital abnormality with incidence of 0.05-0.1% in the normal population. Anomalies of great vessels are usually incidental findings, because they are asymptomatic. Right aortic arch infrequently presents with a vascular ring that can cause complete or partial obstruction of the trachea and/or esophagus. The understanding of this arch anomaly is based on Edward′s hypothesis about the double arch system during embryonic developmental.

Footprint parameters as a measure of arch height.

Science.gov (United States)

Hawes, M R; Nachbauer, W; Sovak, D; Nigg, B M

1992-01-01

The human foot has frequently been categorized into arch height groups based upon analysis of footprint parameters. This study investigates the relationship between directly measured arch height and many of the footprint parameters that have been assumed to represent arch height. A total of 115 male subjects were measured and footprint parameters were calculated from digitized outlines. Correlation and regression analyses were used to determine the relationship between footprint measures and arch height. It may be concluded from the results that footprint parameters proposed in the literature (arch angle, footprint index, and arch index) and two further parameters suggested in this study (arch length index and truncated arch index) are invalid as a basis for prediction or categorization of arch height. The categorization of the human foot according to the footprint measures evaluated in this paper represent no more than indices and angles of the plantar surface of the foot itself.

Concrete-Filled Steel Tube Arch Bridges in China

Directory of Open Access Journals (Sweden)

Jielian Zheng

2018-02-01

Full Text Available In the past 20 years, great progress has been achieved in China in the construction of concrete-filled steel tube (CFST arch bridges and concrete arch bridges with a CFST skeleton. The span of these bridges has been increasing rapidly, which is rare in the history of bridge development. The large-scale construction of expressways and high-speed railways demands the development of long-span arch bridges, and advances in design and construction techniques have made it possible to construct such bridges. In the present study, the current status, development, and major innovative technologies of CFST arch bridges and concrete arch bridges with a CFST skeleton in China are elaborated. This paper covers the key construction technologies of CFST arch bridges, such as the design, manufacture, and installation of steel tube arch trusses, the preparation and pouring of in-tube concrete, and the construction of the world’s longest CFST arch bridge—the First Hejiang Yangtze River Bridge. The main construction technologies of reinforced concrete arch bridges are also presented, which include cable-stayed fastening-hanging cantilever assembly, adjusting the load by means of stay cables, surrounding the concrete for arch rib pouring, and so forth. In addition, the construction of two CFST skeleton concrete arch bridges—the Guangxi Yongning Yong River Bridge and the Yunnan–Guangxi Railway Nanpan River Bridge—is discussed. CFST arch bridges in China have already gained a world-leading position; with the continuous innovation of key technologies, China will become the new leader in promoting the development of arch bridges. Keywords: Concrete-filled steel tube (CFST arch bridge, Steel-reinforced concrete arch bridge, Cable-stayed fastening-hanging cantilever assembly, Vacuum-assisted pouring in-tube concrete, Adjusting load by stay cables

Dental anomalies in 14 patients with IP: clinical and radiological analysis and review.

Science.gov (United States)

Santa-Maria, Fernanda D; Mariath, Luiza Monteavaro; Poziomczyk, Cláudia S; Maahs, Marcia A P; Rosa, Rafael F M; Zen, Paulo R G; Schüller-Faccini, Lavínia; Kiszewski, Ana Elisa

2017-06-01

Current knowledge on dental anomalies in patients with incontinentia pigmenti (IP) has been obtained by examining case reports; however, an overall characterization of such alterations remains lacking. The objective of this study was to determine the frequency, type and location of dental alterations in IP using a case series. Fourteen patients (9 children and 5 adults) with a clinical diagnosis of IP who presented dental anomalies were included in this study. All patients were administered a clinical questionnaire, dental examination and radiological investigation. In the present case series, agenesis of primary dentition was present in 60 % of patients and agenesis of permanent tooth was present in 92.8 % of patients. Most cases were missing at least 6 teeth. Second molar agenesis was present in 13 patients (92.8 %). Anomalies in dental crowns occurred in 71.4 % of cases, and the central incisor was most frequently affected. Two adult patients still had primary teeth. Malocclusion was found in 10 patients (71.4 %). High-arched palate was observed in 7 (50 %) patients. Patients with IP present alterations in both primary and permanent dentition. Because the agenesis of permanent teeth is more common, primary teeth are not always replaced. In addition, the durability of primary dentition appears to be greater in IP. This study shows that patients with IP experience significant loss of teeth, especially in permanent dentition, and have an increased risk of high-arched palate compared to the general population. Prophylactic care of primary teeth in IP is relevant for improving functional and aesthetic outcomes until dental prostheses are implanted.

Riesgos asociados a la pérdida de la longitud del arco dentario en la dentición mixta temprana Risks associated with loss of dental arch length in the early mixed teething

Directory of Open Access Journals (Sweden)

Manuela Ricardo Reyes

2010-09-01

Full Text Available Se realizó un estudio descriptivo y transversal de los 155 niños con pérdida de la longitud del arco dentario en la dentición mixta temprana que acudieron a la consulta de odontología en el área de salud de Genaro Méndez, estado de Táchira, República Bolivariana de Venezuela, desde enero hasta noviembre de 2008, para determinar los riesgos asociados a esta afección. En la serie se obtuvo que la caries dental (36,27 % y las extracciones prematuras (31,37 % constituyeron los riesgos de mayor prevalencia en los niños y niñas de 8 a 9 años. El grupo dentario más afectado fue el posterior (55,48 %; y el diente que más comúnmente perdido por las extracciones prematuras, el segundo molar temporal (42,76 %.A descriptive and cross-sectional study was carried out in 155 children with loss of dental arch length in the early mixed teething, who attended the dental outpatient department in the health area of Genaro Méndez, state of Táchira, Bolivarian Republic of Venezuela, from January to November, 2008, to determine the risks associated with this condition. In the series it was found that the dental decay (36,27 % and early extractions (31,37 % were the most prevalent risks in 8-9 year-old children. The most affected teeth group was the posterior one (55,48 %, and the tooth most commonly lost by early extractions was the second temporal molar (42,76 %.

[Reconstruction and measurement of a digital dental model using grating projection and reverse engineering].

Science.gov (United States)

Zhenzhen, Wang; Yi, Lu; Jun, Song; Jun, Chen; Qin, Zhou

2015-02-01

This work lays the foundation for establishing a digital model database with normal occlusion. A digital dental cast is acquired through grating projection, and model features are measured through reverse engineering. The grating projection system controlled by a computer was projected onto the surface of a normal dental model. Three-dimensional contour data were obtained through multi-angle shooting. A three-dimensional model was constructed, and the model features were analyzed by using reverse engineering. The digital model was compared with the plaster model to determine the accuracy of the measurement system. The structure of three-dimensional reconstruction model was clear. The digital models of two measurements exhibited no significant difference (P > 0.05). When digital and plaster models were measured, we found that the crown length and arch width were not statistically different (P > 0.05), whereas the difference between the crown width and arch length was statistically significant (P model by using the grating projection technique and reverse engineering can be used for dental model measurement in clinic al and scientific research and can provide a scientific method for establishing a digital model database with normal occlusion.

Implant-retained dentures for full-arch rehabilitation: a case report comparing fixed and removable restorations.

Science.gov (United States)

Zafiropoulos, Gregory-George; Hoffman, Oliver

2011-01-01

Dental implants as abutments for full-arch restorations are a well-documented treatment modality. This report presents a case in which the patient was treated initially with fixed restorations supported by either implants or natural teeth and subsequently treated with a removable implant/telescopic crown-supported overdenture. Advantages and disadvantages of each approach are described and discussed. While the fixed restoration resulted in a functionally satisfactory treatment outcome, the patient was displeased with the esthetic appearance. The main concern was the unnaturally long tooth shape necessary to compensate for the insufficient alveolar ridge height. Replacement of the existing restoration with an implant-supported removable overdenture led to a functionally and esthetically acceptable result. When deciding whether to use a fixed or removable implant-supported full-arch restoration, a multitude of factors must be considered. Due to the possible need for additional surgical steps to enhance the esthetic appearance surrounding fixed restorations, removable implant-supported partial dentures often are the better choice.

The role of family functioning in childhood dental caries.

Science.gov (United States)

Duijster, Denise; Verrips, G H W; van Loveren, Cor

2014-06-01

This study investigated the relationship between family functioning and childhood dental caries. Further objectives were (i) to explore whether oral hygiene behaviours could account for a possible association between family functioning dimensions and childhood dental caries and (ii) to explore whether family functioning could mediate the relationship between sociodemographic factors and childhood dental caries. A random sample of 630 5- to 6-year-old children was recruited from six large paediatric dental centres in the Netherlands. Children's dmft scores were extracted from personal dental records. A parental questionnaire and the Gezinsvragenlijst (translation: Family Questionnaire) were used to collect data on sociodemographic characteristics, oral hygiene behaviours and family functioning. Family functioning was assessed on five dimensions: responsiveness, communication, organization, partner-relation and social network. Associations with dmft were analysed using multilevel modelling. Bivariate analysis showed that children from normal functioning families on the dimensions responsiveness, communication, organization and social network had significantly lower dmft scores compared with children from dysfunctional families. Poorer family functioning on all dimensions was associated with an increased likelihood of engaging in less favourable oral hygiene behaviours. Children with lower educated mothers, immigrant children and children of higher birth order were more likely to come from poorer functioning families. In multivariate analysis, organization remained a significant predictor of dmft after adjusting for the other family functioning dimensions and the mother's education level, but it lost statistical significance after adjustment for oral hygiene behaviours. A relationship between family functioning and childhood dental caries was found, which may have operated via oral hygiene behaviours. Family functioning modestly explained socioeconomic inequalities in

Image Processing Techniques for Assessment of Dental Trays

Science.gov (United States)

2001-10-25

170 patients having Angle Class I molar relationships with minor malocclusions and teeth including second molars fully erupted without loss of tooth...Abstract-A tray selected for the dental patient must adapt to the curvature of the teeth and allow the impression material to be in appropriate...brands of perforated metal trays with 170 lower arch cast models collected from patients having Angle Class 1 type occlusion with minor malocclusions

Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE)

Science.gov (United States)

2005-04-01

PA 15213-3890 Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE) Felix Bachmann and Mark Klein Software...DATES COVERED 00-00-2005 to 00-00-2005 4. TITLE AND SUBTITLE Methodical Design of Software Architecture Using an Architecture Design Assistant...important for architecture design – quality requirements and constraints are most important Here’s some evidence: If the only concern is

Accuracy of complete-arch dental impressions: a new method of measuring trueness and precision

OpenAIRE

Ender, Andreas; Mehl, Albert

2013-01-01

STATEMENT OF PROBLEM: A new approach to both 3-dimensional (3D) trueness and precision is necessary to assess the accuracy of intraoral digital impressions and compare them to conventionally acquired impressions. PURPOSE: The purpose of this in vitro study was to evaluate whether a new reference scanner is capable of measuring conventional and digital intraoral complete-arch impressions for 3D accuracy. MATERIAL AND METHODS: A steel reference dentate model was fabricated and measured with a...

Avaliação do espaço adicional requerido no perímetro do arco inferior para o nivelamento da curva de Spee Assessment of the additional lower arch perimeter needed for leveling the curve of Spee

Directory of Open Access Journals (Sweden)

Marcio José da Silva Campos

2009-08-01

Full Text Available OBJETIVO: determinar o perímetro de arco adicional necessário para o nivelamento da curva de Spee através de uma técnica laboratorial em modelos de estudo. MÉTODOS: foram utilizados 70 modelos inferiores nos quais se mediu a profundidade da curva de Spee e o perímetro do arco (de segundo molar a segundo molar. Nos mesmos modelos, após a simulação do nivelamento da curva de Spee, o perímetro de arco foi novamente avaliado, mantendo sua forma e comprimento. RESULTADOS: foi confirmada a correlação entre a profundidade da curva de Spee e o perímetro de arco adicional, sendo deduzida a fórmula [Paa = 0,21 CSmax - 0,04]. CONCLUSÃO: a técnica proposta permitiu, através da avaliação do perímetro de arco com curva de Spee nivelada, a determinação do espaço disponível para o alinhamento dentário.AIM: To determine the additional arch perimeter needed for leveling the curve of Spee by means of a laboratory technique using dental casts. METHODS: Seventy lower dental models were used for measuring the depth of the curve of Spee and assessing the arch perimeter from second molar to second molar. In these dental casts, after simulation of leveling the curve of Spee, arch perimeter was reevaluated, after maintaining its form and length. RESULTS: The correlation between the depth of the curve of Spee and the additional arch perimeter was ratified, as can be shown by the formula [Paa = 0,21 CSmax - 0,04]. CONCLUSION: The proposed technique allowed, through the assessment of the arch perimeter with the leveled curve of Spee, the determination of the space available for tooth alignment.

Highly Tunable Electrothermally Actuated Arch Resonator

KAUST Repository

Hajjaj, Amal Z.

2016-12-05

This paper demonstrates experimentally, theoretically, and numerically a wide-range tunability of electrothermally actuated MEMS arch beams. The beams are made of silicon and are intentionally fabricated with some curvature as in-plane shallow arches. Analytical results based on the Galerkin discretization of the Euler Bernoulli beam theory are generated and compared to the experimental data and results of a multi-physics finite-element model. A good agreement is found among all the results. The electrothermal voltage is applied between the anchors of the clamped-clamped MEMS arch beam, generating a current that passes through the MEMS arch beam and controls its axial stress caused by thermal expansion. When the electrothermal voltage increases, the compressive stress increases inside the arch beam. This leads to increase in its curvature, thereby increases the resonance frequencies of the structure. We show here that the first resonance frequency can increase up to twice its initial value. We show also that after some electro-thermal voltage load, the third resonance frequency starts to become more sensitive to the axial thermal stress, while the first resonance frequency becomes less sensitive. These results can be used as guidelines to utilize arches as wide-range tunable resonators.

Stress and burnout among Swiss dental residents

OpenAIRE

Divaris, Kimon; Lai, Caroline S; Polychronopoulou, Argy; Eliades, Theodore; Katsaros, Christos

2012-01-01

Stress and burnout have been well-documented in graduate medical and undergraduate dental education, but studies among dental graduate students and residents are sparse. The purpose of this investigation was to examine perceived stressors and three dimensions of burnout among dental residents enrolled in the University of Bern, Switzerland. Thirty-six residents enrolled in five specialty programmes were administered the Graduate Dental Environment Stress (GDES30) questionnaire and the Maslach...

Applications of Nanomaterials in Dental Science: A Review.

Science.gov (United States)

Sharan, Jitendra; Singh, Shivani; Lale, Shantanu V; Mishra, Monu; Koul, Veena; Kharbanda, P

2017-04-01

Nanotechnology has revolutionized health care industry in a large scale and its applications are a boon to modern medicine and dental science. It is expected to pervade and further revolutionize the art and science of dentistry and may well have important applications spanning all the aspects of oral diseases, diagnosis, prevention and treatment. Materials science in dentistry has embraced the technology to produce nanomaterials that are being used in caries inhibitors, antimicrobial resins, hard tissue remineralizing agents, targeted drug delivery, scaffolds, bio-membranes, nanocrystalline hydroxyl apatite, restorative cements, adhesion promoters and boosters, bioactive glass, tissue conditioners, reinforced methacrylate resins, root canal disinfectants, friction free orthodontic arch wires and nano composites life. These upcoming technologies have potential to bring about significant benefits in the form of improvement in dental science and to society. The present review presents the latest recent developments in this interdisciplinary field bridging nanotechnology and dental science.

Electrothermally Tunable Arch Resonator

KAUST Repository

Hajjaj, Amal Z.

2017-03-18

This paper demonstrates experimentally, theoretically, and numerically a wide-range tunability of electrothermally actuated microelectromechanical arch beams. The beams are made of silicon and are intentionally fabricated with some curvature as in-plane shallow arches. An electrothermal voltage is applied between the anchors of the beam generating a current that controls the axial stress caused by thermal expansion. When the electrothermal voltage increases, the compressive stress increases inside the arch beam. This leads to an increase in its curvature, thereby increasing its resonance frequencies. We show here that the first resonance frequency can increase monotonically up to twice its initial value. We show also that after some electrothermal voltage load, the third resonance frequency starts to become more sensitive to the axial thermal stress, while the first resonance frequency becomes less sensitive. These results can be used as guidelines to utilize arches as wide-range tunable resonators. Analytical results based on the nonlinear Euler Bernoulli beam theory are generated and compared with the experimental data and the results of a multi-physics finite-element model. A good agreement is found among all the results. [2016-0291

Standardizing foot-type classification using arch index values.

Science.gov (United States)

Wong, Christopher Kevin; Weil, Rich; de Boer, Emily

2012-01-01

The lack of a reliable classification standard for foot type makes drawing conclusions from existing research and clinical decisions difficult, since different foot types may move and respond to treatment differently. The purpose of this study was to determine interrater agreement for foot-type classification based on photo-box-derived arch index values. For this correlational study with two raters, a sample of 11 healthy volunteers with normal to obese body mass indices was recruited from both a community weight-loss programme and a programme in physical therapy. Arch index was calculated using AutoCAD software from footprint photographs obtained via mirrored photo-box. Classification as high-arched, normal, or low-arched foot type was based on arch index values. Reliability of the arch index was determined with intra-class correlations; agreement on foot-type classification was determined using quadratic weighted kappa (κw). Average arch index was 0.215 for one tester and 0.219 for the second tester, with an overall range of 0.017 to 0.370. Both testers classified 6 feet as low-arched, 9 feet as normal, and 7 feet as high-arched. Interrater reliability for the arch index was ICC=0.90; interrater agreement for foot-type classification was κw=0.923. Classification of foot type based on arch index values derived from plantar footprint photographs obtained via mirrored photo-box showed excellent reliability in people with varying BMI. Foot-type classification may help clinicians and researchers subdivide sample populations to better differentiate mobility, gait, or treatment effects among foot types.

Standardizing Foot-Type Classification Using Arch Index Values

Science.gov (United States)

Weil, Rich; de Boer, Emily

2012-01-01

ABSTRACT Purpose: The lack of a reliable classification standard for foot type makes drawing conclusions from existing research and clinical decisions difficult, since different foot types may move and respond to treatment differently. The purpose of this study was to determine interrater agreement for foot-type classification based on photo-box-derived arch index values. Method: For this correlational study with two raters, a sample of 11 healthy volunteers with normal to obese body mass indices was recruited from both a community weight-loss programme and a programme in physical therapy. Arch index was calculated using AutoCAD software from footprint photographs obtained via mirrored photo-box. Classification as high-arched, normal, or low-arched foot type was based on arch index values. Reliability of the arch index was determined with intra-class correlations; agreement on foot-type classification was determined using quadratic weighted kappa (κw). Results: Average arch index was 0.215 for one tester and 0.219 for the second tester, with an overall range of 0.017 to 0.370. Both testers classified 6 feet as low-arched, 9 feet as normal, and 7 feet as high-arched. Interrater reliability for the arch index was ICC=0.90; interrater agreement for foot-type classification was κw=0.923. Conclusions: Classification of foot type based on arch index values derived from plantar footprint photographs obtained via mirrored photo-box showed excellent reliability in people with varying BMI. Foot-type classification may help clinicians and researchers subdivide sample populations to better differentiate mobility, gait, or treatment effects among foot types. PMID:23729964

Increasing the number of inter-arch contacts improves mastication in adults with Down syndrome: a prospective controlled trial.

Science.gov (United States)

Hennequin, Martine; Mazille, Marie-Noëlle; Cousson, Pierre-Yves; Nicolas, Emmanuel

2015-06-01

Feeding difficulties due to their condition have been widely described for babies, children and adults with Down syndrome (DS). A previous study demonstrated that, compared with wearing a placebo appliance, wearing an occlusal appliance increased inter-arch dental contacts, improved the oral health status of adults with DS and normalised their mandibular rest position. This longitudinal prospective controlled trial aimed to evaluate whether increasing inter-arch contacts in adults with DS would lead to improved masticatory efficiency. Fourteen subjects with DS (mean age±SD: 28.5±9.3years) and twelve controls without DS (24.6±1.0years) were video recorded while chewing samples of carrot and peanuts with and without an oral appliance that was designed to equalise the number of posterior functional units (PFUs) in both groups. Three parameters were collected during mastication for 15cycles and until swallowing: food refusals, food bolus granulometry (D50) and kinematic parameters of the chewing process (number of cycles, chewing duration and cycle frequency within the chewing sequence). In the DS group, increasing the number of PFUs led to a decrease in bolus particle size, to fewer masticatory cycles needed to produce a bolus ready for swallowing and to a decrease in the occurrence of food refusal, while mean chewing frequency did not vary. In the control group, bolus granulometry and chewing time increased with appliance wear while mean chewing frequency decreased. These changes clearly indicate a functional improvement in subjects with DS. This study also demonstrated a causal relationship between the number of functional pairs of posterior teeth and improved mastication. Any evaluation of feeding behaviour in persons with DS should consider inter-arch dental contacts as an explicative variable for feeding problems and their nutritional and respiratory consequences. Copyright © 2015 Elsevier Inc. All rights reserved.

Digital archaeology field recording in the 4th dimension: ArchField C++ a 4D GIS for digital field work

KAUST Repository

Smith, Neil; Howland, Matthew; Levy, Thomas E.

2016-01-01

With the rapid adoption of laser scanning and photogrammetry among the archaeological community the creation of point cloud `data scaffolds' and digital documentation of archaeological sites is now becoming common. In field excavations, however, the continual exposure of archaeological layers requires a digital toolset in which to record, categorize and spatially locate artifacts, installations, and loci within a site's daily 3D or aerial scan. We present ArchField C++, the latest version of our digital field recording software that enables real-time digital GIS 3D Top Plan production within a rendering engine designed for visualizing massive 3D datasets. ArchField directly connects to Total Stations and our RTK GPS units to record sub-centimeter measurements for artifacts, scanning markers, loci boundaries, and camera positions. The processing pipeline enables the generation of publishable orthographic and perspective maps from the first day of excavation to the last. As a backend it uses a PostGIS database and the ability to export and import various vector, raster, DEM and 3D datasets that can be hosted by on-line geo-referenced databases. We present the application of ArchField C++ to our 2014 field excavations of the early Iron Age site of Khirbat al-Jariyah located in Southern Jordan.

Digital archaeology field recording in the 4th dimension: ArchField C++ a 4D GIS for digital field work

KAUST Repository

Smith, Neil

2016-02-25

With the rapid adoption of laser scanning and photogrammetry among the archaeological community the creation of point cloud `data scaffolds\\' and digital documentation of archaeological sites is now becoming common. In field excavations, however, the continual exposure of archaeological layers requires a digital toolset in which to record, categorize and spatially locate artifacts, installations, and loci within a site\\'s daily 3D or aerial scan. We present ArchField C++, the latest version of our digital field recording software that enables real-time digital GIS 3D Top Plan production within a rendering engine designed for visualizing massive 3D datasets. ArchField directly connects to Total Stations and our RTK GPS units to record sub-centimeter measurements for artifacts, scanning markers, loci boundaries, and camera positions. The processing pipeline enables the generation of publishable orthographic and perspective maps from the first day of excavation to the last. As a backend it uses a PostGIS database and the ability to export and import various vector, raster, DEM and 3D datasets that can be hosted by on-line geo-referenced databases. We present the application of ArchField C++ to our 2014 field excavations of the early Iron Age site of Khirbat al-Jariyah located in Southern Jordan.

Factors affecting dental service quality.

Science.gov (United States)

Bahadori, Mohammadkarim; Raadabadi, Mehdi; Ravangard, Ramin; Baldacchino, Donia

2015-01-01

Measuring dental clinic service quality is the first and most important factor in improving care. The quality provided plays an important role in patient satisfaction. The purpose of this paper is to identify factors affecting dental service quality from the patients' viewpoint. This cross-sectional, descriptive-analytical study was conducted in a dental clinic in Tehran between January and June 2014. A sample of 385 patients was selected from two work shifts using stratified sampling proportional to size and simple random sampling methods. The data were collected, a self-administered questionnaire designed for the purpose of the study, based on the Parasuraman and Zeithaml's model of service quality which consisted of two parts: the patients' demographic characteristics and a 30-item questionnaire to measure the five dimensions of the service quality. The collected data were analysed using SPSS 21.0 and Amos 18.0 through some descriptive statistics such as mean, standard deviation, as well as analytical methods, including confirmatory factor. Results showed that the correlation coefficients for all dimensions were higher than 0.5. In this model, assurance (regression weight=0.99) and tangibility (regression weight=0.86) had, respectively, the highest and lowest effects on dental service quality. The Parasuraman and Zeithaml's model is suitable to measure quality in dental services. The variables related to dental services quality have been made according to the model. This is a pioneering study that uses Parasuraman and Zeithaml's model and CFA in a dental setting. This study provides useful insights and guidance for dental service quality assurance.

Assembly and lifting of Pearl-Chain arches

DEFF Research Database (Denmark)

Halding, Philip Skov; Hertz, Kristian Dahl; Viebæk, N.E.

2015-01-01

Pearl-Chain arches were invented at the Technical University of Denmark in cooporation with the company Abeo A/S. The system uses specially designed, pre-fabricated concrete elements that are post-tensioned together into an arch shape, which is then lifted into place. The arches can be used both ...

Sella turcica bridging and dental anomalies: is there an association?

Science.gov (United States)

Scribante, Andrea; Sfondrini, Maria Francesca; Cassani, Marco; Fraticelli, Danilo; Beccari, Sergio; Gandini, Paola

2017-11-01

Sella turcica bridging (STB), or calcification of the interclinoid ligament of sella turcica, has been reported to be associated with some dental anomalies (palatal canine impaction and transposition). The aim of the study was to find any association between canine impaction, hyperdontia or hypodontia and sellar dimensions or bridging. Lateral cephalometric radiographs from 78 patients with impacted canines, 68 with dental agenesis and 17 with hyperdontia were collected. Linear dimensions of sella turcica were calculated and compared to those of a control group (47 individuals). A standardize scoring scale was used to quantify the extent of STB from each radiographs. The frequency of partial and complete calcifications of sella in patients with dental anomalies is increased when compared to controls. STB can influence the interclinoid distance but does not affect other linear dimensions of sella. No statistically significant difference has been found in sellar dimensions and STB expression when evaluating radiographs at different ages. STB is frequently found in patients with dental abnormalities. © 2017 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Effect of dental technician disparities on the 3-dimensional accuracy of definitive casts.

Science.gov (United States)

Emir, Faruk; Piskin, Bulent; Sipahi, Cumhur

2017-03-01

Studies that evaluated the effect of dental technician disparities on the accuracy of presectioned and postsectioned definitive casts are lacking. The purpose of this in vitro study was to evaluate the accuracy of presectioned and postsectioned definitive casts fabricated by different dental technicians by using a 3-dimensional computer-aided measurement method. An arch-shaped metal master model consisting of 5 abutments resembling prepared mandibular incisors, canines, and first molars and with a 6-degree total angle of convergence was designed and fabricated by computer-aided design and computer-aided manufacturing (CAD-CAM) technology. Complete arch impressions were made (N=110) from the master model, using polyvinyl siloxane (PVS) and delivered to 11 dental technicians. Each technician fabricated 10 definitive casts with dental stone, and the obtained casts were numbered. All casts were sectioned, and removable dies were obtained. The master model and the presectioned and postsectioned definitive casts were digitized with an extraoral scanner, and the virtual master model and virtual presectioned and postsectioned definitive casts were obtained. All definitive casts were compared with the master model by using computer-aided measurements, and the 3-dimensional accuracy of the definitive casts was determined with best fit alignment and represented in color-coded maps. Differences were analyzed using univariate analyses of variance, and the Tukey honest significant differences post hoc tests were used for multiple comparisons (α=.05). The accuracy of presectioned and postsectioned definitive casts was significantly affected by dental technician disparities (Ptechnician differences. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Effective dose comparison between protocols stitched and usual protocols in dental cone beam CT for complete arcade

International Nuclear Information System (INIS)

Soares, M. R.; Maia, A. F.; Batista, W. O. G.; Lara, P. A.

2014-08-01

To visualization a complete dental radiology dental lives together with two separate proposals: [1] protocols diameter encompassing the entire arch (single) or [2] protocol with multiple fields of view (Fov) which together encompass the entire arch (stitched Fov s). The objective of this study is to evaluate effective dose values in examination protocols for all dental arcade available in different outfits with these two options. For this, a female anthropomorphic phantom manufactured by Radiology Support Devices twenty six thermoluminescent dosimeters inserted in relevant bodies and positions was used. Irradiate the simulator in the clinical conditions. The protocols were averaged and compared: [a] 14.0 cm x 8.5 cm and [b] 8.5 cm x 8.5 cm (Gendex Tomography GXCB 500), [c] protocol stitched for jaw combination of three volumes of 5.0 cm x 3.7 cm (Kodak 9000 3D scanner) [d] protocol stitched Fov s 5.0 cm x 8.0 cm (Planmeca Pro Max 3D) and [e] single technical Fov 14 cm x 8 cm (i-CAT Classical). Our results for the effective dose were: a range between 43.1 and 111.1 micro Sv for technical single Fov and 44.5 and 236.2 for technical stitched Fov s. The protocol presented the highest estimated effective dose was [d] and showed that lowest index was registered [a]. These results demonstrate that the protocol stitched Fov generated in Kodak 9000 3D machine applied the upper dental arch has practically equal value effective dose obtained by protocol extended diameter of, [a], which evaluates in a single image upper and lower arcade. It also demonstrates that the protocol [d] gives an estimate of five times higher than the protocol [a]. Thus, we conclude that in practical terms the protocol [c] stitched Fov s, not presents dosimetric advantages over other protocols. (Author)

Effective dose comparison between protocols stitched and usual protocols in dental cone beam CT for complete arcade

Energy Technology Data Exchange (ETDEWEB)

Soares, M. R.; Maia, A. F. [Universidade Federal de Sergipe, Departamento de Fisica, Cidade Universitaria Prof. Jose Aloisio de Campos, Marechal Rondon s/n, Jardim Rosa Elze, 49-100000 Sao Cristovao, Sergipe (Brazil); Batista, W. O. G. [Instituto Federal da Bahia, Rua Emidio dos Santos s/n, Barbalho, Salvador, 40301015 Bahia (Brazil); Lara, P. A., E-mail: wilsonottobatista@gmail.com [Instituto de Pesquisas Energeticas e Nucleares / CNEN, Av. Lineu Prestes 2242, Cidade Universitaria, 05508-000 Sao Paulo (Brazil)

2014-08-15

To visualization a complete dental radiology dental lives together with two separate proposals: [1] protocols diameter encompassing the entire arch (single) or [2] protocol with multiple fields of view (Fov) which together encompass the entire arch (stitched Fov s). The objective of this study is to evaluate effective dose values in examination protocols for all dental arcade available in different outfits with these two options. For this, a female anthropomorphic phantom manufactured by Radiology Support Devices twenty six thermoluminescent dosimeters inserted in relevant bodies and positions was used. Irradiate the simulator in the clinical conditions. The protocols were averaged and compared: [a] 14.0 cm x 8.5 cm and [b] 8.5 cm x 8.5 cm (Gendex Tomography GXCB 500), [c] protocol stitched for jaw combination of three volumes of 5.0 cm x 3.7 cm (Kodak 9000 3D scanner) [d] protocol stitched Fov s 5.0 cm x 8.0 cm (Planmeca Pro Max 3D) and [e] single technical Fov 14 cm x 8 cm (i-CAT Classical). Our results for the effective dose were: a range between 43.1 and 111.1 micro Sv for technical single Fov and 44.5 and 236.2 for technical stitched Fov s. The protocol presented the highest estimated effective dose was [d] and showed that lowest index was registered [a]. These results demonstrate that the protocol stitched Fov generated in Kodak 9000 3D machine applied the upper dental arch has practically equal value effective dose obtained by protocol extended diameter of, [a], which evaluates in a single image upper and lower arcade. It also demonstrates that the protocol [d] gives an estimate of five times higher than the protocol [a]. Thus, we conclude that in practical terms the protocol [c] stitched Fov s, not presents dosimetric advantages over other protocols. (Author)

Influence of high expansion dental stone used as investing medium on the changes in occlusal vertical dimension of complete dentures.

Science.gov (United States)

Salloum, Alaa'a M

2013-10-01

Despite advances in materials and techniques, complete dentures made of acrylic resin experience an increase in the occlusal vertical dimension (OVD) during processing. Many factors that affect the OVD of complete dentures are known. However, no study has examined the effect of using high-expansion dental stone (type V) as an investing material on the OVD. This study investigated the effects of using a high-expansion dental stone as an investing material on changes in the OVD of complete dentures. Twenty sets of simulated upper and lower dentures were processed by the compression molding technique. Specimens were equally divided into 2 groups. In the dental stone type III (DST III) group, the lower, middle, and upper parts of a flask were filled with DST III. In the dental stone type V (DST V) group, the procedure was the same as in the DST III group, except that the middle layer was made of high-expansion DST V. Changes in the OVD were measured before and after denture processing. Collected data were analyzed with t-test statistics. Differences were considered statistically significant at the 95% confidence level. Both groups showed a small increase in the OVD as a result of processing, but the OVD increase was significantly less in the DST V group compared to the DST III group. High-expansion DST V can be recommended as an investing material to reduce the increase in the OVD that may occur while processing complete dentures.

Dimensional Stability of Color-Changing Irreversible Hydrocolloids after Disinfection

Directory of Open Access Journals (Sweden)

Khaledi AAR

2015-03-01

Full Text Available Statement of Problem: Disinfection of dental impressions is a weak point in the dental hygiene chain. In addition, dental office personnel and dental technicians are endangered by cross-contamination. Objectives: This study aimed to investigate the dimensional stability of two color-changing irreversible hydrocolloid materials (IH after disinfection with glutaraldehyde. Materials and Methods: In this in vitro study, impressions were made of a master maxillary arch containing three reference inserts on the occlucal surface of the left and right maxillary second molars and in the incisal surface of the maxillary central incisors. Two types of color-changing irreversible hydrocolloid (tetrachrom, cavex were used. Glutaraldehyde 2% was used in two methods of spraying and immersion to disinfect the impressions. The control group was not disinfected. Casts were made of type IV gypsum. The linear dimensional change of the stone casts was measured with a profile projector. For statistical analysis, Kruskall-Wallis and Mann-Witney tests were used (α=0.05. Results: By immersion method, the casts fabricated from tetrachrom were 0.36% larger in the anteroposterior (AP and 0.05% smaller in cross arch (CA dimensions; however, the casts prepared after spraying of tetrachrom were 0.44% larger in the AP and 0.10% smaller in CA dimensions. The casts made from Cavex were 0.05% smaller in the AP and 0.02% smaller in CA dimensions after spraying and 0.01% smaller in the AP and 0.003% smaller in CA dimensions after immersion. Generally there were not significant differences in AP and CA dimensions of the experimental groups compared to the control (p > 0.05. Conclusions: Disinfection of the tested color-changing irreversible hydrocolloids by glutaraldahyde 2% did not compromise the accuracy of the obtained casts.

Agreement in the determination of preformed wire shape templates on plaster models and customized digital arch form diagrams on digital models.

Science.gov (United States)

Camardella, Leonardo Tavares; Sá, Maiara da Silva Bezerra; Guimarães, Luciana Campos; Vilella, Beatriz de Souza; Vilella, Oswaldo de Vasconcellos

2018-03-01

The aim of this study was to verify the accuracy of preformed wire shape templates on plaster models and those of customized digital arch form diagrams on digital models. Twenty pairs of dental plaster models were randomly selected from the archives of the Department of Orthodontics of Federal Fluminense University, Niterói, Rio de Janeiro, Brazil. All plaster model samples were scanned in a plaster model scanner to create the respective digital models. Three examiners defined the arch form on the mandibular arch of these models by selecting the ideal preformed wire shape template on each plaster model or by making a customized digital arch form on the digital models using a digital arch form customization tool. These 2 arch forms were superimposed by the best-fit method. The greatest differences in the 6 regions on the superimposed arches were evaluated. Each examiner presented a descriptive analysis with the means, standard deviation, and minimum and maximum intervals of the differences on the superimpositions. Intraclass correlation coefficient and paired t tests were used to evaluate the accuracy of the superimpositions. Among the 6 regions analyzed in the superimpositions, the largest differences in the anterior and premolar regions were considered clinically insignificant, whereas the largest differences in the right molar region, especially the second molar area, were considered clinically significant by all 3 examiners. The intraclass correlation coefficients showed a weak correlation in the premolar region and moderate correlations in the anterior and molar regions. The paired t test showed statistically significant differences in the left anterior and premolar regions. The superimpositions between the arch forms on plaster and digital models were considered accurate, and the differences were not clinically significant, with the exception of the second molar area. Despite the favorable results, the requirement of correcting some software problems may

Semi-parametric estimation for ARCH models

Directory of Open Access Journals (Sweden)

Raed Alzghool

2018-03-01

Full Text Available In this paper, we conduct semi-parametric estimation for autoregressive conditional heteroscedasticity (ARCH model with Quasi likelihood (QL and Asymptotic Quasi-likelihood (AQL estimation methods. The QL approach relaxes the distributional assumptions of ARCH processes. The AQL technique is obtained from the QL method when the process conditional variance is unknown. We present an application of the methods to a daily exchange rate series. Keywords: ARCH model, Quasi likelihood (QL, Asymptotic Quasi-likelihood (AQL, Martingale difference, Kernel estimator

Dental anxiety and personality: investigating the relationship between dental anxiety and self-consciousness.

Science.gov (United States)

Economou, George C

2003-09-01

This study investigated whether personality plays a role in a condition called dental anxiety. Specifically, the study examined the relationship between dental anxiety (the negative response to the stress elicited from a dental interaction) and self-consciousness (the tendency to evaluate aspects of oneself that are subject to private and public display). The purpose of this study was to identify the characteristics possessed by dentally anxious individuals who face potential health risks because of their avoidance. Sixty York University undergraduate students were recruited by convenience sampling to participate. These subjects completed Corah's Dental Anxiety Scale and the Self-Consciousness Scale. The Self-Consciousness Scale consists of three subscales, including private self-consciousness, public self-consciousness, and social anxiety. Results indicated an 0.54 significant correlation between dental anxiety and self-consciousness. The public self-consciousness and social anxiety subscales correlated the most with dental anxiety. Furthermore, the data did not indicate a significant moderating relationship for gender between the two aforementioned variables. These results contribute to the establishment of personality characteristics as one of the dimensions determining dental anxiety.

Maxillary arch rehabilitation using implant-supported computer-assisted design-computer-assisted manufacturing-milled titanium framework

Directory of Open Access Journals (Sweden)

Tulika S Khanna

2017-01-01

Full Text Available Esthetic and functional rehabilitation of completely edentulous maxillary arch with fixed implant supported prosthesis is a challenging task. Newer technologies such as computer assisted design computer assisted manufacturing (CAD CAM and cone beam conventional tomography play an important role in achieving predictable results. Full mouth porcelain fused to metal (PFM individual crowns on CAD CAM milled titanium framework provides positive esthetic and functional outcome. This is a case report of rehabilitation of partially edentulous maxillary arch patient. Staged rehabilitation of this patient was planned. In the first stage, root canal treatment of key abutment teeth was done, nonsalvageable teeth were removed, and immediate interim overdenture was provided. In the second stage, five Nobel Biocare dental implants were placed. After integration impressions were made, CAD CAM milled titanium bar was fabricated. Individual PFM crowns were made and cemented. This method gives better esthetic compared to acrylic fused to metal hybrid prosthesis with the advantage of retrievability just like screw retained prosthesis. Hence, this technique is good for rehabilitation of patients with high esthetic demands.

Nonlinear Dynamics of Electrostatically Actuated MEMS Arches

KAUST Repository

Al Hennawi, Qais M.

2015-05-01

In this thesis, we present theoretical and experimental investigation into the nonlinear statics and dynamics of clamped-clamped in-plane MEMS arches when excited by an electrostatic force. Theoretically, we first solve the equation of motion using a multi- mode Galarkin Reduced Order Model (ROM). We investigate the static response of the arch experimentally where we show several jumps due to the snap-through instability. Experimentally, a case study of in-plane silicon micromachined arch is studied and its mechanical behavior is measured using optical techniques. We develop an algorithm to extract various parameters that are needed to model the arch, such as the induced axial force, the modulus of elasticity, and the initially induced initial rise. After that, we excite the arch by a DC electrostatic force superimposed to an AC harmonic load. A softening spring behavior is observed when the excitation is close to the first resonance frequency due to the quadratic nonlinearity coming from the arch geometry and the electrostatic force. Also, a hardening spring behavior is observed when the excitation is close to the third (second symmetric) resonance frequency due to the cubic nonlinearity coming from mid-plane stretching. Then, we excite the arch by an electric load of two AC frequency components, where we report a combination resonance of the summed type. Agreement is reported among the theoretical and experimental work.

Coexistence of Single Coronary Artery Anomaly and Aortic Arch Anomaly

Directory of Open Access Journals (Sweden)

Yilmaz Omur Otlu

2014-03-01

Full Text Available A 74-year-old male patient was admitted to our hospital for evaluation of recent onset atypical chest pain. His medical history included hypertension, dislipidemia and smoking. Physical examination was unremarkable. The resting electrocardiogram was demonstrated biphasic T waves on lateral derivations. Transthoracic echocardiography showed normal left and right ventricular dimensions and functions. Coronary angiography was planned for the patient. First, right transradial approach tried; but guidewire could not be advanced to ascendig aorta. Coronary angiography was performed through the right femoral artery. Multiple attempts to cannulate the left coronary ostium were unsuccessful. The right coronary artery cannulated from its normal ostium in the right sinus of Valsalva. After a very short common main stem, the artery divided into a right coronary artery, and separate left anterior descending artery and circumflex artery (Figure A. The coronary arteries were normal without any significant stenosis and any extrinsic compression. An aortic root injection confirmed the absence of left coronary ostium. Also, a retroesophageal right subclavian artery originating from the left aortic arch (arteria lusoria was detected as the last branch of aortic arch on contrast enhanced computerized tomography (Figure B-C. The patient discharged with medical teraphy.

Automated detection of alveolar arches for nasoalveolar molding in cleft lip and palate treatment

Directory of Open Access Journals (Sweden)

Bauer Franz X.

2016-09-01

Full Text Available Nasoalveolar moulding (NAM has become a widely accepted and evidence-based treatment strategy for newborns with cleft lip and palate (CLP, attempting to reduce the cleft gap and to form an appropriately shaped alveolar arch by an intraoral patient-specific NAM plate and to erect the usually flattened nostrils towards a natural nose wing occurrence. The generation of such an appropriately shaped NAM plate requires, besides 3d information of the patient’s initially cleft lip and palate, an estimated target model of the maxilla. Previous studies showed the applicability of curve-based approaches to describe the maxilla during early infancy. We have developed an automated algorithm implemented with the programming language Python, describing the alveolar arch by an approximated ellipse. Therefore, the digitalized data sets of human maxillae were aligned to a global coordinate system with a total least square method and subsequently analyzed with the curvature-based algebraic point set surfaces (APSS algorithm. The gathered information of height ratio and curvature allows the detection of points on the alveolar segments and therewith the fit of an ellipse describing the human maxilla. In 84.5% of 193 maxilla impressions of healthy newborns the fitted ellipses described the course of the maxilla within defined margins. Applying the algorithm to 38 newborns suffering from unilateral cleft lip and palate in 76.3% the fitted ellipses bridge the CLP alveolar segments, so that a harmonic alveolar arch can be deduced. Describing the alveolar arch by one or multiple ellipses allows (i to automatically measure the dimensions of the maxilla, (ii to derive a growth model during early infancy, (iii to derive a healthy harmonic arch from CLP alveolar segments and (iv to automatically generate a basic NAM device on the basis of the virtually modified maxilla.

Highly tunable NEMS shallow arches

KAUST Repository

Kazmi, Syed N. R.

2017-11-30

We report highly tunable nanoelectromechanical systems NEMS shallow arches under dc excitation voltages. Silicon based in-plane doubly clamped bridges, slightly curved as shallow arches, are fabricated using standard electron beam lithography and surface nanomachining of a highly conductive device layer on a silicon-on-insulator wafer. By designing the structures to have gap to thickness ratio of more than four, the mid-plane stretching of the nano arches is maximized such that an increase in the dc bias voltage will result into continuous increase in the resonance frequency of the resonators to wide ranges. This is confirmed analytically based on a nonlinear beam model. The experimental results are found to be in good agreement with that of the results from developed analytical model. A maximum tunability of 108.14% for a 180 nm thick arch with an initially designed gap of 1 μm between the beam and the driving/sensing electrodes is achieved. Furthermore, a tunable narrow bandpass filter is demonstrated, which opens up opportunities for designing such structures as filtering elements in high frequency ranges.

The role of polymorphisms associated with early tooth eruption in dental and occlusal traits in East Asian populations

Science.gov (United States)

Kawaguchi, Akira; Kim, Yong-Il; Haga, Shugo; Katayama, Koshu; Ishida, Hajime; Park, Soo-Byung; Maki, Koutaro; Kimura, Ryosuke

2014-01-01

Objective A recent study suggested that rs6504340, a polymorphism within the homeobox B (HOXB) gene cluster, is associated with the susceptibility for malocclusions in Europeans. The resulting malocclusions require orthodontic treatment. The aim of this study was to investigate the association of rs6504340 and other dentition-implicated polymorphisms with dental and occlusal traits in Korean and Japanese populations. Methods The study participants included 223 unrelated Koreans from the Busan area and 256 unrelated Japanese individuals from the Tokyo metropolitan area. DNA samples were extracted from saliva specimens. Genotyping for rs6504340 and four single nucleotide polymorphisms (SNPs) that have been shown to be associated with the timing of first tooth eruption and the number of teeth at 1 year of age (rs10506525, rs1956529, rs9674544, and rs8079702) was performed using TaqMan assays. The Index of Orthodontic Treatment Need (IOTN), overjet, overbite, arch length discrepancy, crown sizes, and length and width of the dental arches were measured. Spearman's correlation coefficients were calculated to evaluate relationships between rs6504340 and these dental/occlusal traits. Results We evaluated the aesthetic components and dental health components of the IOTN in the Korean and Japanese populations and found that neither rs6504340 nor the other four SNPs showed any association with dental and occlusal traits in these East Asian populations. Conclusions These negative results suggest that further research is needed to identify the genetic determinants of malocclusions in order to reach a consensus. PMID:24696826

Mycotic Aneurysm of the Aortic Arch

Directory of Open Access Journals (Sweden)

Ji Hye Seo

2014-08-01

Full Text Available A mycotic aneurysm of the thoracic aorta is rare. We report a case of mycotic aneurysm that developed in the aortic arch. An 86-year-old man was admitted with fever and general weakness. Blood culture yielded methicillin-resistant Staphylococcus aureus. Chest X-ray showed an enlarged aortic arch, and computed tomography scan revealed an aneurysm in the aortic arch. The patient was treated only with antibiotics and not surgically. The size of the aneurysm increased rapidly, resulting in bronchial obstruction and superimposed pneumonia. The patient died of respiratory failure.

An epidemiological study of malocclusion and occlusal traits related to different stages of dental development

Directory of Open Access Journals (Sweden)

Lejla Redžepagić Vražalica

2017-04-01

Full Text Available Abstract Introduction: Various types of malocclusions present one of the most common dental problems of today’s population. Planning the implementation of orthodontic therapy, especially preventive and interceptive measures is one of many activities of public sector health, and it requires information regarding the prevalence of malocclusion in different parts of our country. Aim: The aim of this study was to determine the prevalence of malocclusion of preschool and school children in the city of Sarajevo. Materials and methods: This study was comprised of 373 children out of which 200 preschool and school children were included in the final sample according to the inclusion and exclusion criteria for participation. 100 children were five-year-olds with complete deciduous dentition, and 100 children were 14-year-olds with permanent dentition. The examined variables in the study were: dental status and existence of caries, overjet, depth of overbite, a presence of premature contacts, a presence of diastemas, crowding of teeth in the dental arch (for 14-year-olds and rotation of teeth in the dental arch (for 14-year-olds. Results: The prevalence of malocclusion was 58% in the group of preschool children and 83% in the group of school children. Conclusion: Results of this study demonstrate a need for the implementation of preventive and interceptive orthodontic methods in primary health care, which would reduce the need for expensive and long term orthodontic therapy.

Fragile X syndrome: panoramic radiographic evaluation of dental anomalies, dental mineralization stage, and mandibular angle

Directory of Open Access Journals (Sweden)

Aida Sabbagh-Haddad

Full Text Available ABSTRACT Fragile X syndrome (FXS is a disorder linked to the chromosome X long arm (Xq27.3, which is identified by a constriction named fragile site. It determines various changes, such as behavioral or emotional problems, learning difficulties, and intellectual disabilities. Craniofacial abnormalities such as elongated and narrow face, prominent forehead, broad nose, large and prominent ear pavilions, strabismus, and myopia are frequent characteristics. Regarding the oral aspects, deep and high-arched palate, mandibular prognathism, and malocclusion are also observed. Objective: The purpose of this study was to evaluate the dental radiographic characteristics as described in 40 records of patients with panoramic radiography. Material and Methods: The patients were in the range of 6–17 years old, and were divided into two groups (20 subjects who were compatible with the normality standard and 20 individuals diagnosed with the FXS, which were matched for gender and age. Analysis of the panoramic radiographic examination involved the evaluation of dental mineralization stage, mandibular angle size, and presence of dental anomalies in both deciduous and permanent dentitions. Results: The results of radiographic evaluation demonstrated that the chronology of tooth eruption of all third and second lower molars is anticipated in individuals with FXS (p<0.05. In this group, supernumerary deciduous teeth (2.83%, giroversion of permanent teeth (2.31%, and partial anodontia (1.82% were the most frequent dental anomalies. In addition, an increase was observed in the mandibular angle size in the FXS group (p<0.05. Conclusion: We conclude that knowledge of dental radiographic changes is of great importance for dental surgeons to plan the treatment of these individuals.

Children's experiences of dental anxiety.

Science.gov (United States)

Morgan, Annie G; Rodd, Helen D; Porritt, Jenny M; Baker, Sarah R; Creswell, Cathy; Newton, Tim; Williams, Chris; Marshman, Zoe

2017-03-01

Dental anxiety is common among children. Although there is a wealth of research investigating childhood dental anxiety, little consideration has been given to the child's perspective. This qualitative study sought to explore with children their own experiences of dental anxiety using a cognitive behavioural therapy assessment model. Face-to-face, semi-structured interviews were conducted with dentally anxious children aged 11-16 years. The Five Areas model was used to inform the topic guide and analysis. Data were analysed using a framework approach. In total, 13 children were interviewed. Participants described their experiences of dental anxiety across multiple dimensions (situational factors and altered thoughts, feelings, physical symptoms, and behaviours). Participants placed considerable value on communication by dental professionals, with poor communication having a negative influence on dental anxiety and the dentist-patient relationship. This study confirms the Five Areas model as an applicable theoretical model for the assessment of childhood dental anxiety. Children provided insights about their own dental anxiety experiences that have not previously been described. © 2016 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Mechanism Research of Arch Dam Abutment Forces during Overload

Directory of Open Access Journals (Sweden)

Yu Xia

2015-01-01

Full Text Available This paper presents research on the abutment forces of a double-curvature arch dam during overload based on numerical calculation results obtained through finite element method by Ansys. Results show that, with an increase in elevation, the abutment forces and bending moment of the arch dam increase first and then decrease from the bottom to the top of the dam. Abutment forces and bending moment reach their maximum at the middle or middle-down portion of the dam. The distributions of abutment forces and moment do not change during overload. The magnitude of each arch layer’s forces and moment increases linearly during overload. This result indicates that each arch layer transmits bearing loads to the rocks of the left and right banks steadily. This research explains the operating mechanism of an arch dam under normal and overload conditions. It provides a simple method to calculate the distribution of forces Fx and Fy and a new method to calculate the overload factor of an arch dam through the estimation of arch layers based on the redistribution characteristic of arch abutment forces.

[Outcomes of endovascular repairing aortic arch disease hybrid with supra-arch debranching procedures].

Science.gov (United States)

Wang, Mian; Chang, Guangqi; Yin, Henghui; Yao, Chen; Wang, Jinsong; Wang, Shenming

2015-11-01

To summarize the experience of endovascular repairing aortic arch disease hybrid with supra-arch debranching procedures. It was a retrospective study. From January 2002 to December 2014, 42 high risk patients with aortic arch disease were treated by supra-arch debranching hybrid with subsequent endovascular repair in the First Affiliated Hospital of Sun Yat-sen University. There were 39 male and 3 female patients with a mean age of (53±13) years (ranging from 34 to 80 years). Of the 42 patients, 7 were thoracic aortic aneurysm, 20 were Stanford type B aortic dissection and 15 were Stanford type A aortic dissection. After the supra-aortic debranching technique, simultaneous (n=16) or staged (n=26, mean interval (7±3) days) endovascular repair were performed. Fisher exact test was used to compare the in-hospital mortality of ascending aorta based debranching and non-ascending aorta based debranching. Technical success rate was 81.0% (34/42). The overall 30-day complication rate was 31.0% (13/42), including 3 cerebral stroke (7.1%), 8 endoleak (19.0%, including 6 type I endoleak and 2 type II endoleak), 1 circulatory failure, 1 aorto-tracheal fistula. The 30-day mortality was 9.5% (4/42), 2 died of cerebral stroke, 1 died of circulatory failure, 1 died of aorto-tracheal fistula. The in-hospital mortality of ascending aorta based debranching group was obviously higher than that of the non-ascending aorta based debranching group (4/16 vs. 0, P=0.02). The median time of follow-up was 64.8 (2 to 156.9) months. CT scanning was performed at 1, 3 months after surgery and annually thereafter. The overall survival rate was 76.6%. During the follow-up period, there was 4 deaths, and 2 of them were aortic artery related (5.3%). There were 4 de novo complications during the follow-up period, 1 stroke attributed to bypass occlusion was cured by medical treatment, 2 pseudoaneurysm was successfully treated with open surgery, 1 stent-graft induced new distal entry tear was

Implant-Supported PMMA Monolithic Full-Arch Rehabilitation with Surgical Computer-Planned Guide and Immediate Provisional: A Case Report with One Year Follow-Up

Directory of Open Access Journals (Sweden)

Vincenzo Luca Zizzari

2018-01-01

Full Text Available The aim of this case report is to describe the surgical and prosthetic procedures to achieve maxillary and mandibular implant-supported PMMA monolithic full-arch rehabilitation (PMFR with surgical computer-planned guide and immediate provisional. In such cases, the correct planning of dental implants’ position, length, and diameter and the prosthetic phases via computer-aided design are very important to achieve good aesthetic and functional long-lasting results.

Implant-Supported PMMA Monolithic Full-Arch Rehabilitation with Surgical Computer-Planned Guide and Immediate Provisional: A Case Report with One Year Follow-Up

OpenAIRE

Zizzari, Vincenzo Luca; Tacconelli, Gianmarco

2018-01-01

The aim of this case report is to describe the surgical and prosthetic procedures to achieve maxillary and mandibular implant-supported PMMA monolithic full-arch rehabilitation (PMFR) with surgical computer-planned guide and immediate provisional. In such cases, the correct planning of dental implants’ position, length, and diameter and the prosthetic phases via computer-aided design are very important to achieve good aesthetic and functional long-lasting results.

Frequency and Type of Prosthetic Complications Associated with Interim, Immediately Loaded Full-Arch Prostheses: A 2-Year Retrospective Chart Review.

Science.gov (United States)

Drago, Carl

2016-08-01

The purpose of this report was to retrospectively evaluate implant and immediate full-arch prosthesis survival rates over a 24-month period; patients were consecutively treated with immediate occlusal loading. Dental arch, gender, and implant orientation (vertical vs. tilted) were also noted. All Brånemark System implants (Nobel Active) and interim, all-acrylic resin prostheses placed in patients following an All-on-Four™ protocol, in a single private practice were assessed by retrospective patient chart review. The amount of space provided surgically for implant restorative components and prostheses was determined from measurements of the vertical heights of the interim prostheses in the right/left anterior and posterior segments. These measurements were made in the laboratory. Interim prosthetic repairs (type, frequency, length of time from insertion) were analyzed by type, arch, gender, and implant orientation. Implant survival and insertion torque values were also measured. Inclusion criteria consisted of all Brånemark System implants placed with the All-on-Four protocol from September 1, 2011, until August 31, 2013. Specific dietary instructions were given for the first 7 days immediately postoperatively and for the weeks prior to insertion of the definitive prostheses. One hundred twenty-nine patients, comprising 191 arches (766 implants) from September 1, 2011, until August 31, 2013, were included in the study. One patient experienced implant failure yielding an overall implant survival rate (SR) of 99.5% (762 of 766). Four hundred twenty-six of 430 maxillary implants and 336 of 336 mandibular implants survived for SRs of 99.1% and 100%, respectively. Regarding implant orientation, 415 of 417 tilted implants (SR 99.5%) and 343 of 345 (CSR 95.6%) vertical implants were noted to be clinically stable. Interim, all-acrylic resin prostheses were in place for a mean of 199.2 days; mandibular prostheses were in place for an average of 195.4 days; maxillary

Utilização da distração osteogênica mediana sagital para tratamento da atresia mandibular Mid-sagital mandibular distraction osteogenesis for treatment of lower arch crowding

Directory of Open Access Journals (Sweden)

Luiz Guilherme Martins Maia

2007-06-01

Full Text Available OBJETIVO: relatar o tratamento de uma paciente com apinhamento severo decorrente de uma atresia maxilomandibular, tratada por meio da Distração Osteogênica da Sínfise Mandibular (DOSM. RESULTADOS: neste caso, observamos bom engrenamento dentário, diminuição do corredor bucal escuro, correção do apinhamento, boa forma de arcos e boa estética facial, num período de tempo bastante satisfatório, sem trazer dano ao tecido periodontal adjacente. CONCLUSÃO: pacientes com arcos atrésicos e apinhamento dentário podem ser beneficiados com a DOSM que, quando bem indicada, surge como uma nova forma de tratamento para casos limítrofes de apinhamento dentário, nos quais as alternativas convencionais oferecem limitações, tais como o achatamento do perfil facial, o aumento do corredor bucal e a instabilidade.OBJECTIVE: To report the treatment of a patient with severe dental crowding resulting from a maxillary mandibular atresia, treated by the osteogenic extraction of the mandible symphysis (DOSM. RESULTS: In this case there was good dental engagement, a reduction of the dark oral aisle, a correction of the crowding, good dental arch form and good facial esthetics, in a very satisfactory period of time without causing damage to the adjacent periodontal tissues. CONCLUSION: Patients with atresia arches and dental crowding can be benefited by a DOSM that when well indicated, appears as a new form of treatment in cases of maximum borderline dental crowding, in which the conventional alternatives have limitations such as flattening of the facial profile, increase in the oral aisle and instability.

Glossary to ARCH (GARCH)

DEFF Research Database (Denmark)

Bollerslev, Tim

The literature on modeling and forecasting time-varying volatility is ripe with acronyms and abbreviations used to describe the many different parametric models that have been put forth since the original linear ARCH model introduced in the seminal Nobel Prize winning paper by Engle (1982......).  The present paper provides an easy-to-use encyclopedic reference guide to this long list of ARCH acronyms.  In addition to the acronyms associated with specific parametric models, I have also included descriptions of various abbreviations associated with more general statistical procedures and ideas...

Dentoalveolar mandibular changes with self-ligating versus conventional bracket systems: A CBCT and dental cast study

Science.gov (United States)

de Almeida, Marcio Rodrigues; Futagami, Cristina; Conti, Ana Cláudia de Castro Ferreira; Oltramari-Navarro, Paula Vanessa Pedron; Navarro, Ricardo de Lima

2015-01-01

OBJECTIVE: The aim of the present study was to compare dentoalveolar changes in mandibular arch, regarding transversal measures and buccal bone thickness, in patients undergoing the initial phase of orthodontic treatment with self-ligating or conventional bracket systems. METHODS: A sample of 25 patients requiring orthodontic treatment was assessed based on the bracket type. Group 1 comprised 13 patients bonded with 0.022-in self-ligating brackets (SLB). Group 2 included 12 patients bonded with 0.022-in conventional brackets (CLB). Cone-beam computed tomography (CBCT) scans and a 3D program (Dolphin) assessed changes in transversal width of buccal bone (TWBB) and buccal bone thickness (BBT) before (T1) and 7 months after treatment onset (T2). Measurements on dental casts were performed using a digital caliper. Differences between and within groups were analyzed by Student's t-test; Pearson correlation coefficient was also calculated. RESULTS: Significant mandibular expansion was observed for both groups; however, no significant differences were found between groups. There was significant decrease in mandibular buccal bone thickness and transversal width of buccal bone in both groups. There was no significant correlation between buccal bone thickness and dental arch expansion. CONCLUSIONS: There were no significant differences between self-ligating brackets and conventional brackets systems regarding mandibular arch expansion and changes in buccal bone thickness or transversal width of buccal bone. PMID:26154456

Young adult patient with two palatally maxillary impacted canines and forced traction on rigid arches of stabilization. Case report.

Science.gov (United States)

Mucedero, M; Pezzuto, C; Rozzi, M; Ricchiuti, M R; Cozza, P

2016-01-01

Young adult patient treated for impaction of two maxillary canines. C.S., 15 years, female. Diagnostic evaluation by clinical and radiographic examinations shows permanent dentition with persistence of 5.3 and 6.3, impaction of 1.3 and 2.3, dento-skeletal Cl I malocclusion, normodivergence of bone bases. Analysis of TC dentalscan confirms the palatal impaction of 1.3 and 2.3. The treatment plan provided an orthodontic-surgical approach for adequate space management in dental arch, evaluation of eruption movements, choice of anchorage device, surgical exposure and application of the brackets. Deciduous canines have been extracted and an edgewise appliance with rigid rectangular full thickness archwires has been used to align the arches and to obtain maximum anchorage during the forced traction. The surgical phase, for exposure of 1.3 and 2.3 respectively, performed an open technique by excisional uncovering and a close technique by a repositioned flap. The case has been finalized for the achievement of the right occlusal keys. The possibility to choose the surgical technique depending on the intraosseous position of impacted teeth in association to the edgewise therapy with full thickness arches allows to realize an effectiveness surgical-orthodontic approach for the forced traction of impacted teeth in a favourable position.

Palate dimensions in six-year-old children with unilateral cleft lip and palate: a six-center study on dental casts.

Science.gov (United States)

Koželj, Vesna; Vegnuti, Miljana; Drevenšek, Martina; Hortis-Dzierzbicka, Maria; Gonzalez-Landa, Gonzalo; Hanstein, Siiri; Klimova, Irena; Kobus, Kazimierz; Kobus-Zaleśna, Katarzyna; Semb, Gunvor; Shaw, Bill

2012-11-01

To compare palatal dimensions in 6-year-old children with unilateral cleft lip and palate (UCLP) treated by different protocols with those of noncleft children. Retrospective intercenter outcome study. Patients : Upper dental casts from 129 children with repaired UCLP and 30 controls were analyzed by the trigonometric method. Six European cleft centers. Main outcome measures : Sagittal, transverse, and vertical dimensions of the palate were observed. Palate variables were analyzed with descriptive methods and nonparametric tests. Regarding several various characteristics measured on a relatively small number of subjects, hierarchical, k-means clustering, and principal component analyses were used. Mean values of the observed dimensions for five cleft groups differed significantly from the control (p cleft differed significantly from all other cleft groups in most variables (p palate. A similar number of treated children were classified into each cluster, while all children without clefts were classified in the same cluster. The percentage of treated children from a particular group that fit this cluster ranged from 0% to 70% and increased with age at palatal closure and number of primary surgical procedures. At 6 years of age, children with stepwise repair and hard palate closure after the age of two more frequently result in palatal dimensions of noncleft control than children with earlier palatal closure and one-stage cleft repair.

Progressive changes in arch width from primary to early mixed dentition period: a longitudinal study.

Science.gov (United States)

Sangwan, S; Chawla, H S; Goyal, A; Gauba, K; Mohanty, U

2011-01-01

The present study was conducted to evaluate, on a longitudinal basis, the changes in intercanine and intermolar widths form the primary to the early mixed dentition periods. A total of 38 children aged 4-5 years, with normal occlusion without any proximal caries or any dental anomalies, were selected. The impressions were recorded and casts were prepared. Intercanine and intermolar widths were measured on these dental casts with the help of a digital vernier calliper. After 3 years follow-up, the impressions were recorded again and dental casts were prepared. Intercanine and intermolar widths were measured again at this stage and were compared with the baseline data using the paired t-test and the chi square test. There is a significant increase in the intercanine (3.93 + 1.70 mm) and intermolar width (1.49 + 1.77 mm) during the transition period from primary to early mixed dentition in both the arches and both the sexes. The gender-wise comparison showed a greater increase in males than in females, but this was not statistically significant. A thorough knowledge of growth changes during various stages of the mixed dentition period are important for a pediatric dentist to make an accurate diagnosis and treatment planning during preventive and interceptive orthodontics.

Prevalence of dental anomalies in deciduous dentition and its association with succedaneous dentition: A cross-sectional study of 4180 South Indian children.

Science.gov (United States)

Shilpa, G; Gokhale, Niraj; Mallineni, Sreekanth Kumar; Nuvvula, Sivakumar

2017-01-01

The objective of this study was to estimate the prevalence of dental anomalies in primary dentition of Indian population. This cross-sectional study was conducted on 4180 children in the age of 2-6 years. Anomalies were classified based on Kreiborg criteria. The term "double tooth" was used to avoid misinterpretation between gemination. and fusion. Patients having radiographs were also examined for associated dental anomalies in permanent dentition. The occurrence and gender prevalence were evaluated using descriptive statistics. About 95. (2.27%) children exhibited at least one dental anomaly. Thirty.seven children showed 51 missing teeth. (0.88%), mostly in lower right incisors with a statistically significant difference between arches. (P = 0.0056) Nine children. (0.21%) had supernumerary teeth commonly in the right maxilla. Two cases of oligodontia. (0.04%) and talon cusps. (0.04%) and one case of triple tooth. (0.02%) were observed. Forty children. (0.95%) had 43 double teeth mostly in the right mandible with a statistically significant difference between the arches. (P = 0.0105). No significant difference was observed based on gender and arch, but they were statistically significant between the right and left sides. (P = 0.018). Among the children with radiographs available, 45% showed anomalies in the succedaneous dentition. The prevalence rates of children with double tooth, hypodontia, and hyperdontia in our study are 0.95%, 0.88%, and 0.21%, respectively. The overall prevalence rate of anomalies among boys was higher than girls.

The role of family functioning in childhood dental caries

NARCIS (Netherlands)

Duijster, D.; Verrips, G.H.W.; Loveren, C. van

2014-01-01

OBJECTIVES: This study investigated the relationship between family functioning and childhood dental caries. Further objectives were (i) to explore whether oral hygiene behaviours could account for a possible association between family functioning dimensions and childhood dental caries and (ii) to

The role of family functioning in childhood dental caries

NARCIS (Netherlands)

Duijster, D.; Verrips, G.H.W.; van Loveren, C.

2014-01-01

Objectives This study investigated the relationship between family functioning and childhood dental caries. Further objectives were (i) to explore whether oral hygiene behaviours could account for a possible association between family functioning dimensions and childhood dental caries and (ii) to

Fragile X syndrome: panoramic radiographic evaluation of dental anomalies, dental mineralization stage, and mandibular angle

Science.gov (United States)

Sabbagh-Haddad, Aida; Haddad, Denise Sabbagh; Michel-Crosato, Edgard; Arita, Emiko Saito

2016-01-01

ABSTRACT Fragile X syndrome (FXS) is a disorder linked to the chromosome X long arm (Xq27.3), which is identified by a constriction named fragile site. It determines various changes, such as behavioral or emotional problems, learning difficulties, and intellectual disabilities. Craniofacial abnormalities such as elongated and narrow face, prominent forehead, broad nose, large and prominent ear pavilions, strabismus, and myopia are frequent characteristics. Regarding the oral aspects, deep and high-arched palate, mandibular prognathism, and malocclusion are also observed. Objective: The purpose of this study was to evaluate the dental radiographic characteristics as described in 40 records of patients with panoramic radiography. Material and Methods: The patients were in the range of 6–17 years old, and were divided into two groups (20 subjects who were compatible with the normality standard and 20 individuals diagnosed with the FXS), which were matched for gender and age. Analysis of the panoramic radiographic examination involved the evaluation of dental mineralization stage, mandibular angle size, and presence of dental anomalies in both deciduous and permanent dentitions. Results: The results of radiographic evaluation demonstrated that the chronology of tooth eruption of all third and second lower molars is anticipated in individuals with FXS (pdental anomalies. In addition, an increase was observed in the mandibular angle size in the FXS group (pdental radiographic changes is of great importance for dental surgeons to plan the treatment of these individuals. PMID:27812623

Comparison of Arch Width Changes Following Orthodontic ...

African Journals Online (AJOL)

2015-11-21

Nov 21, 2015 ... Materials and Methods: The study was conducted with pre- and post-treatment digital models from ... or posterior arch width following orthodontic treatment ..... premolar extraction cases show significant arch width increases in ...

Effect of aging on the configurational change of the aortic arch

Directory of Open Access Journals (Sweden)

Atsuhiro Kojima

2016-04-01

Full Text Available We explored the relationship between aging and the configuration of the aortic arch using computed tomography angiography (CTA. We retrospectively reviewed CTA obtained in 140 cases. The configuration of the aortic arch was categorized into three types based on the criteria mentioned by Madhwal et al., and the relationships between each configuration and patient characteristics were analyzed. Anomalies of the aortic arch were also explored. Twenty patients had a type-1 aortic arch (mean age, 56.1 years, 30 patients had a type-2 aortic arch (mean age, 66.3 years, and 89 patients had a type-3 aortic arch (mean age, 71.7 years. The mean age of patients with a type-3 aortic arch was significantly higher than that of patients with a type-1 aortic arch. No significant correlations between the type of aortic arch and other factors, such as smoking habit, were seen. The configuration of the aortic arch in our study appears to be significantly affected by the age of the patients.

Automatic teeth axes calculation for well-aligned teeth using cost profile analysis along teeth center arch.

Science.gov (United States)

Kim, Gyehyun; Lee, Jeongjin; Seo, Jinwook; Lee, Wooshik; Shin, Yeong-Gil; Kim, Bohyoung

2012-04-01

In dental implantology and virtual dental surgery planning using computed tomography (CT) images, the examination of the axes of neighboring and/or biting teeth is important to improve the performance of the masticatory system as well as the aesthetic beauty. However, due to its high connectivity to neighboring teeth and jawbones, a tooth and/or its axis is very elusive to automatically identify in dental CT images. This paper presents a novel method of automatically calculating individual teeth axes. The planes separating the individual teeth are automatically calculated using cost profile analysis along the teeth center arch. In this calculation, a novel plane cost function, which considers the intensity and the gradient, is proposed to favor the teeth separation planes crossing the teeth interstice and suppress the possible inappropriately detected separation planes crossing the soft pulp. The soft pulp and dentine of each individually separated tooth are then segmented by a fast marching method with two newly proposed speed functions considering their own specific anatomical characteristics. The axis of each tooth is finally calculated using principal component analysis on the segmented soft pulp and dentine. In experimental results using 20 clinical datasets, the average angle and minimum distance differences between the teeth axes manually specified by two dentists and automatically calculated by the proposed method were 1.94° ± 0.61° and 1.13 ± 0.56 mm, respectively. The proposed method identified the individual teeth axes accurately, demonstrating that it can give dentists substantial assistance during dental surgery such as dental implant placement and orthognathic surgery.

Integration of Digital Dental Casts in Cone-Beam Computed Tomography Scans

Science.gov (United States)

Rangel, Frits A.; Maal, Thomas J. J.; Bergé, Stefaan J.; Kuijpers-Jagtman, Anne Marie

2012-01-01

Cone-beam computed tomography (CBCT) is widely used in maxillofacial surgery. The CBCT image of the dental arches, however, is of insufficient quality to use in digital planning of orthognathic surgery. Several authors have described methods to integrate digital dental casts into CBCT scans, but all reported methods have drawbacks. The aim of this feasibility study is to present a new simplified method to integrate digital dental casts into CBCT scans. In a patient scheduled for orthognathic surgery, titanium markers were glued to the gingiva. Next, a CBCT scan and dental impressions were made. During the impression-taking procedure, the titanium markers were transferred to the impression. The impressions were scanned, and all CBCT datasets were exported in DICOM format. The two datasets were matched, and the dentition derived from the scanned impressions was transferred to the CBCT of the patient. After matching the two datasets, the average distance between the corresponding markers was 0.1 mm. This novel method allows for the integration of digital dental casts into CBCT scans, overcoming problems such as unwanted extra radiation exposure, distortion of soft tissues due to the use of bite jigs, and time-consuming digital data handling. PMID:23050159

Dental esthetic satisfaction, received and desired dental treatments for improvement of esthetics.

Science.gov (United States)

Akarslan, Zühre Zafersoy; Sadik, Burak; Erten, Hüya; Karabulut, Erdem

2009-01-01

The purposes of this research were to investigate factors influencing patients' satisfaction with their present dental esthetic, received previous dental treatments on anterior teeth and basic treatments that they wanted to undergo to improve their dental appearance. A total of 1014 patients who attended a dental school in a major city in Turkey participated in the study. The participants were surveyed with a questionnaire containing questions about gender, age, education level, self-reported tooth appearance, received previous dental treatments on anterior teeth and desired basic esthetic dental treatments. Statistical analysis of the verifying data was made with descriptive statistics, chi2 test and multiple logistic regression analyses. According to the analyses of the verifying data, 55.1% of the patients were dissatisfied with the color of their teeth, 42.7% with dental appearance, 29.9% with crowding of anterior teeth, 23.3% were hiding teeth while smiling, 16.1% had non-esthetic restorations and 11.9% thought that their anterior teeth were protruding. Esthetic restoration was found to be the most-performed treatment recently (29.0%) and whitening of teeth was the most-desired dental treatment (49.0%). Gender, age and education level had an effect on satisfaction and received previous and desired dental treatments for improvement of esthetics. Many of the Turkish patients surveyed in the study were dissatisfied and desired the improvement of dental esthetics. Therefore, dentists should consider this as an important dimension in their practice.

Clarifying the anatomy of the fifth arch artery

Directory of Open Access Journals (Sweden)

Saurabh Kumar Gupta

2016-01-01

Full Text Available The artery allegedly forming in the fifth pharyngeal arch has increasingly been implicated as responsible for various vascular malformations in patients with congenitally malformed hearts. Observations from studies on developing embryos, however, have failed to provide support to substantiate several of these inferences such that the very existence of the fifth arch artery remains debatable. To the best of our knowledge, in only a solitary human embryo has a vascular channel been found that truly resembled the artery of the fifth arch. Despite the meager evidence to support its existence, the fifth arch artery has been invoked to explain the morphogenesis of double-barreled aorta, some unusual forms of aortopulmonary communications, and abnormalities of the brachiocephalic arteries. In most of these instances, the interpretations have proved fallible when examined in the light of existing knowledge of cardiac development. In our opinion, there are more plausible alternative explanations for the majority of these descriptions. Double-barreled aorta is more likely to result from retention of the recently identified dorsal collateral channels while abnormalities of brachiocephalic arteries are better explained on the basis of extensive remodeling of aortic arches during fetal development. Some examples of aortopulmonary communications, nonetheless, may well represent persistence of the developing artery of the fifth pharyngeal arch. We here present one such case - a patient with tetralogy of Fallot and pulmonary atresia, in whom the fifth arch artery provided a necessary communication between the ascending aorta and the pulmonary arteries. In this light, we discuss the features we consider to be essential before attaching the tag of "fifth arch artery" to a candidate vascular channel.

Nonstationary ARCH and GARCH with t-distributed Innovations

DEFF Research Database (Denmark)

Pedersen, Rasmus Søndergaard; Rahbek, Anders

Consistency and asymptotic normality are established for the maximum likelihood estimators in the nonstationary ARCH and GARCH models with general t-distributed innovations. The results hold for joint estimation of (G)ARCH effects and the degrees of freedom parameter parametrizing the t-distribut......Consistency and asymptotic normality are established for the maximum likelihood estimators in the nonstationary ARCH and GARCH models with general t-distributed innovations. The results hold for joint estimation of (G)ARCH effects and the degrees of freedom parameter parametrizing the t......-distribution. With T denoting sample size, classic square-root T-convergence is shown to hold with closed form expressions for the multivariate covariances....

The impact of dental appearance and anxiety on self-esteem in adult orthodontic patients.

Science.gov (United States)

Romero-Maroto, M; Santos-Puerta, N; González Olmo, M J; Peñacoba-Puente, C

2015-08-01

To analyse the relationship between different dimensions of dental appearance impact and self-esteem in adult patients undergoing orthodontic treatment, with special attention to the possible mediating role of anxiety. A quasi-experimental design was used with a matched control group (without orthodontic treatment). In each group (experimental and control), there were 85 patients. The impact of dental appearance was measured using the Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ). State anxiety was assessed with the State Anxiety Inventory (STAI-S) and self-esteem with Rosenberg's self-esteem scale. In both groups (experimental and control), self-esteem correlates negatively, ranging between 0.26 and 0.43, with all dimensions of dental appearance impact (except for the positive dental self-confidence dimension, where all correlations were positive). Anxiety correlates positively, ranges between 0.35 and 0.44, with social impact, psychological impact and aesthetic concern, although it maintains no significant correlations with dental self-confidence. Nevertheless, in patients undergoing orthodontic treatment, anxiety plays a mediating role between dental impact dimensions and self-esteem, whilst for the control group anxiety only plays a mediator role between psychological impact and self-esteem. Anxiety plays a fundamental role in the effect of perceived dental impact on self-esteem in adult patients undergoing orthodontic treatment. These results have important practical implications for the design of bio-psycho-social intervention programs that contemplate cognitive-affective variables as an essential part of orthodontic treatment in adults. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

[Analysis of the interaction of genotypic and paratypic factors in the development of maxillo-dental anomalies in ontogeny].

Science.gov (United States)

Lil'in, E T; Persin, L S; Titov, V I; Danilina, O A

1996-09-01

Component analysis of total phenotypic variance was used to analyze data on 80 pairs of twins aged 3 to 18 years, examined in the Stupino outpatient dental clinic, Moscow oblast. Genotypic and environmental factors are shown to play different roles in the development of abnormalities of teeth, dental arches, and occlusion at different ontogenetic periods of deciduous, mixed, and permanent dentition. Periods when paratypic factors prevailed were revealed. This made it possible to identity periods when prophylaxis and orthodontic treatment are the most advisable.

The virtual dental home: a critique.

Science.gov (United States)

Friedman, Jay W; Nash, David A; Mathu-Muju, Kavita R

2017-09-01

The Virtual Dental Home is a concept of the Pacific Center for Special Care of the Arthur A. Dugoni School of Dentistry in San Francisco. It is designed to improve access to dental care for underserved populations, specifically children and institutionalized adults. This article describes the development and implementation of the Virtual Dental Home, subsequently critiquing the concept. The criteria for a dental home are not met by the program. It is the equivalent of a traditional public oral health prevention and screening program, with the additional dimension of allowing dental hygienists and assistants to place interim glass ionomer restorations in dental cavities. The critique questions the need to insert a "cloud" dentist into the process. The routine utilization of radiographs is also challenged. The VDH not only lacks the attributes of a dental home, it has not been shown to be as efficient and effective as traditional programs staffed by dental hygienists and dental therapists. The article concludes by describing how programs utilizing dental therapists could address the deficiencies of the Virtual Dental Home, effectively improving access to oral health care for underserved populations. © 2017 American Association of Public Health Dentistry.

Arch index and running biomechanics in children aged 10-14 years.

Science.gov (United States)

Hollander, Karsten; Stebbins, Julie; Albertsen, Inke Marie; Hamacher, Daniel; Babin, Kornelia; Hacke, Claudia; Zech, Astrid

2018-03-01

While altered foot arch characteristics (high or low) are frequently assumed to influence lower limb biomechanics and are suspected to be a contributing factor for injuries, the association between arch characteristics and lower limb running biomechanics in children is unclear. Therefore, the aim of this study was to investigate the relationship between a dynamically measured arch index and running biomechanics in healthy children. One hundred and one children aged 10-14 years were included in this study and underwent a biomechanical investigation. Plantar distribution (Novel, Emed) was used to determine the dynamic arch index and 3D motion capture (Vicon) to measure running biomechanics. Linear mixed models were established to determine the association between dynamic arch index and foot strike patterns, running kinematics, kinetics and temporal-spatial outcomes. No association was found between dynamic arch index and rate of rearfoot strikes (p = 0.072). Of all secondary outcomes, only the foot progression angle was associated with the dynamic arch index (p = 0.032) with greater external rotation in lower arched children. Overall, we found only few associations between arch characteristics and running biomechanics in children. However, altered foot arch characteristics are of clinical interest. Future studies should focus on detailed foot biomechanics and include clinically diagnosed high and low arched children. Copyright © 2018 Elsevier B.V. All rights reserved.

Evaluation of accuracy of complete-arch multiple-unit abutment-level dental implant impressions using different impression and splinting materials.

Science.gov (United States)

Buzayan, Muaiyed; Baig, Mirza Rustum; Yunus, Norsiah

2013-01-01

This in vitro study evaluated the accuracy of multiple-unit dental implant casts obtained from splinted or nonsplinted direct impression techniques using various splinting materials by comparing the casts to the reference models. The effect of two different impression materials on the accuracy of the implant casts was also evaluated for abutment-level impressions. A reference model with six internal-connection implant replicas placed in the completely edentulous mandibular arch and connected to multi-base abutments was fabricated from heat-curing acrylic resin. Forty impressions of the reference model were made, 20 each with polyether (PE) and polyvinylsiloxane (PVS) impression materials using the open tray technique. The PE and PVS groups were further subdivided into four subgroups of five each on the bases of splinting type: no splinting, bite registration PE, bite registration addition silicone, or autopolymerizing acrylic resin. The positional accuracy of the implant replica heads was measured on the poured casts using a coordinate measuring machine to assess linear differences in interimplant distances in all three axes. The collected data (linear and three-dimensional [3D] displacement values) were compared with the measurements calculated on the reference resin model and analyzed with nonparametric tests (Kruskal-Wallis and Mann-Whitney). No significant differences were found between the various splinting groups for both PE and PVS impression materials in terms of linear and 3D distortions. However, small but significant differences were found between the two impression materials (PVS, 91 μm; PE, 103 μm) in terms of 3D discrepancies, irrespective of the splinting technique employed. Casts obtained from both impression materials exhibited differences from the reference model. The impression material influenced impression inaccuracy more than the splinting material for multiple-unit abutment-level impressions.

Job satisfaction of registered dental practitioners.

Science.gov (United States)

Luzzi, L; Spencer, A J; Jones, K; Teusner, D

2005-09-01

This study was designed to measure job satisfaction among registered clinical dentists so as to identify issues which may influence recruitment and retention of dentists in active clinical practice. A questionnaire measuring dimensions of job satisfaction was mailed to a stratified random sample of 80 private and 80 public sector dentists selected from the 1999 Victorian Dental Register. An adjusted response rate of 60 per cent was achieved (n = 87). Analyses showed significant differences (ANOVA; p satisfaction for various dimensions of job satisfaction by gender, age group and practice type. Differences in job satisfaction between male and female dentists related to the personal time dimension. Differences in satisfaction between dentists of different age groups were attributable to six dimensions: relationships with colleagues, relationships with patients, relationships with staff, personal time, community and administrative responsibilities. Differences between levels of satisfaction among private and public dentists related to the autonomy, relationships with patients, pay and resources dimensions. There are various dimensions of job satisfaction that may be pertinent to issues influencing recruitment and retention of dentists. Differences that exist between levels of job satisfaction among private and public sector dentists, between male and female dentists and dentists of different age groups need to be addressed in order to improve recruitment and retention rates of dentists in active clinical practice in different sectors of the dental care system.

Arch translocation and the intra-arch elephant-trunk technique with collared graft for extended chronic dissecting aortic aneurysm

Directory of Open Access Journals (Sweden)

Ikenaga Shigeru

2013-01-01

Full Text Available Abstract Management of extensive, chronic, dissecting aortic aneurysms after prior repair of the ascending aorta presents a technical challenge for surgeons. A symptomatic 64-year-old patient was admitted for elective surgical repair of an aortic annular dilatation, causing severe aortic regurgitation, and a Crawford type II extended thoracoabdominal aneurysm, 4 years after he underwent primary repair of an acute aortic dissection. The aorta was diffusely dilated, and there were no sites beyond the distal aortic arch where anastomosis could be performed. We successfully performed total aortic replacement with a 2-stage strategy, using an arch translocation technique and an intra-arch elephant-trunk technique.

Dental students' motivation and the context of learning

DEFF Research Database (Denmark)

Kristensen, Bettina Tjagvad; Netterstrom, Ingeborg; Kayser, Lars

2009-01-01

This qualitative study shows dental students' motives for choosing the dental education and how the motives influence their motivation at the first semester of study. Further the study demonstrates the relevance of the context of learning. This issue is of importance when planning a curriculum...... for the dental education. The material consists of interviews with eight dental students. The results show that dental students were focused on their future professional role, its practical dimensions and their future working conditions. Their motivation for choosing the dental education was found to influence...... their motivation for studying and their experience of the relevance of the first semester. The dental students who had co-education with the medical students at the first year of study missed a dental context and courses with clinically relevant contents. In conclusion, our data signify the importance...

Occlusal considerations for dental implant restorations.

Science.gov (United States)

Bergmann, Ranier H

2014-01-01

When placed, dental implants are put into an ever-changing oral environment in which teeth can continue to migrate. Yet, the implants themselves are ankylosed. This can lead to occlusal instability. Teeth may continue to erupt, leaving the implants in infraocclusion. Teeth may move mesially away from an implant, requiring modification to close an open contact point. Friction in the connection between teeth and implants can lead to intrusion of teeth and damage to the periodontal attachment apparatus. Implant occlusion with shallow incisal guidance minimizes lateral and tipping forces. Cross-arch stabilization allows the best distribution of occlusal forces. The choice of restorative materials influences long-term occlusal stability.

Is there a prospect for hybrid aortic arch surgery?

Science.gov (United States)

Bashir, Mohamad; Harky, Amer; Bilal, Haris

2018-05-16

The surge of endovascular repair of aortic aneurysm in current modern aortic surgery practice has been the key for surgical management of elective cases of thoracic aortic aneurysms. This has paved way for the combined hybrid approach to be amongst the armamentarium for the management of aortic arch disease. The pivotal understanding of the aortic arch natural history coupled with device technology advancement allowed surgeons insight into delivery of hybrid surgery with acceptable morbidity and mortality results. This review article provides current insights into hybrid technique of aortic arch aneurysm repair and the evidences behind its applicability to arch surgery. It is aimed to highlight the challenges encountered for this innovative approach and correlate its challenges to those that are met by the conventional open aortic arch repair.

Effect of Obesity on Arch Index in Young Adults

Directory of Open Access Journals (Sweden)

Sneha Sameer Ganu

2013-01-01

Full Text Available Background: Excessive increases in weight bearing forces caused by obesity may negatively affect the lower limbs and feet but minimal research has examined the long-term loading effects of obesity on the musculoskeletal system, particularly in reference to the feet. Objectives: The purpose of the study was to investigate the effect of obesity on medial longitudinal arch of foot in young adults. Method: 60 subjects, 30 obese & 30 non obese were assessed for height & weight using standard technique. Radiographic images under static condition were used for calculating the arch index. Result: The arch index of obese subjects was significantly lower than the non obese subjects & there is a negative correlation between the BMI & the arch index. Conclusion: These results suggests that obesity lowers the medial longitudinal arch of foot.

Spectrum of Dental Phenotypes in Nonsyndromic Orofacial Clefting.

Science.gov (United States)

Howe, B J; Cooper, M E; Vieira, A R; Weinberg, S M; Resick, J M; Nidey, N L; Wehby, G L; Marazita, M L; Moreno Uribe, L M

2015-07-01

Children with oral clefts show a wide range of dental anomalies, adding complexity to understanding the phenotypic spectrum of orofacial clefting. The evidence is mixed, however, on whether the prevalence of dental anomalies is elevated in unaffected relatives and is mostly based on small samples. In the largest international cohort to date of children with nonsyndromic clefts, their relatives, and controls, this study characterizes the spectrum of cleft-related dental anomalies and evaluates whether families with clefting have a significantly higher risk for such anomalies compared with the general population. A total of 3,811 individuals were included: 660 cases with clefts, 1,922 unaffected relatives, and 1,229 controls. Dental anomalies were identified from in-person dental exams or intraoral photographs, and case-control differences were tested using χ(2) statistics. Cases had higher rates of dental anomalies in the maxillary arch than did controls for primary (21% vs. 4%, P = 3 × 10(-8)) and permanent dentitions (51% vs. 8%, P = 4 × 10(-62)) but not in the mandible. Dental anomalies were more prevalent in cleft lip with cleft palate than other cleft types. More anomalies were seen in the ipsilateral side of the cleft. Agenesis and tooth displacements were the most common dental anomalies found in case probands for primary and permanent dentitions. Compared with controls, unaffected siblings (10% vs. 2%, P = 0.003) and parents (13% vs. 7%, P = 0.001) showed a trend for increased anomalies of the maxillary permanent dentition. Yet, these differences were nonsignificant after multiple-testing correction, suggesting genetic heterogeneity in some families carrying susceptibility to both overt clefts and dental anomalies. Collectively, the findings suggest that most affected families do not have higher genetic risk for dental anomalies than the general population and that the higher prevalence of anomalies in cases is primarily a physical consequence of the

Track-Bridge Longitudinal Interaction of Continuous Welded Rails on Arch Bridge

Directory of Open Access Journals (Sweden)

Rong Chen

2013-01-01

Full Text Available Taking arch bridges, including deck, half-through, and through arch bridges (short for DAB, HTAB, and TAB as examples, mechanics analysis models of longitudinal interaction between continuously welded rails (short for CWRs and arch bridges are established. Based on the finite element method (FEM, the longitudinal interaction calculation software of CWR on arch bridges has been developed. Focusing on an HTAB, the tension, compression, and deflection conditions are calculated and analyzed. The results show that the mechanics analysis models of three types of arch bridges can truly reflect the real state of the structure; the calculation software can be used for systematic research of the CWR on arch bridge; as for HTAB, temperature difference of arch rib has a small effect on rail tension/compression, and arch bridge can be simplified as a continuous beam for rail tension/compression additional force calculation; in calculation of deflection conditions of HTAB, it is suggested that train loads are arranged on half span and full span and take the direction of load entering bridge into account. Additionally, the deflection additional force variation of CFST basket handle arch bridge is different from that of ordinary bridge.

Bovine aortic arch: A novel association with thoracic aortic dilation

International Nuclear Information System (INIS)

Malone, C.D.; Urbania, T.H.; Crook, S.E.S.; Hope, M.D.

2012-01-01

Aim: To investigate whether there is a link between bovine arch and thoracic aortic aneurysm. Materials and methods: Computed tomography (CT) and magnetic resonance imaging (MRI) images of the thorax of 191 patients with dilated thoracic aortas and 391 consecutive, unselected patients as controls were retrospectively reviewed. Bovine arch was considered present if either a shared origin of the left common carotid and innominate arteries or an origin of the left common carotid from the innominate artery was identified. A chi-square test was used to evaluate the significance of differences between subgroups. Results: A trend towards increased prevalence of bovine arch was seen in patients with dilated aortas (26.2%) compared to controls (20.5%, p = 0.12). The association was statistically significant in patients over 70 years old (31.9%, p = 0.019) and when dilation involved the aortic arch (47.6%, p = 0.003). Conclusions: An association between bovine arch and aortic dilation is seen in older patients, and when dilation involves the aortic arch. Bovine arch should be considered a potential risk factor for thoracic aortic aneurysm.

Coexistence of bilateral first and second branchial arch anomalies

Science.gov (United States)

Thakur, J S; Shekar, Vidya; Saluja, Manika; Mohindroo, N K

2013-01-01

Branchial arch anomalies are one of the most common congenital anomalies that are usually unilateral and bilateral presentation is rare. The simultaneous presence of bilateral second branchial arch anomalies along with bilateral first arch anomalies is extremely rare, with only three such cases reported in the literature. We present two non-syndromic cases of coexisting bilateral first and second arch anomalies. Developmental anomalies of the branchial apparatus account for 17% of all paediatric cervical masses and are the most common type of congenital cervical mass. They usually present in the paediatric age group. About 96–97% of these anomalies are unilateral. Bilateral presentation is seen in 2–3% having a strong familial association. Congenital syndromes also have been associated with first and second branchial arch anomalies. Thorough clinical examination and investigations should be done to rule out these syndromes. PMID:23580675

Arch-Axis Coefficient Optimization of Long-Span Deck-Type Concrete-Filled Steel Tubular Arch Bridge

Science.gov (United States)

Liu, Q. J.; Wan, S.; Liu, H. C.

2017-11-01

This paper is based on Nanpuxi super major bridge which is under construction and starts from Wencheng Zhejiang province to Taishun highway. A finite element model of the whole bridge is constructed using Midas Civil finite element software. The most adverse load combination in the specification is taken into consideration to determine the method of calculating the arch-axis coefficient of long-span deck-type concrete-filled steel tubular arch bridge. By doing this, this paper aims at providing references for similar engineering projects.

Progressive changes in arch width from primary to early mixed dentition period: A longitudinal study

Directory of Open Access Journals (Sweden)

S Sangwan

2011-01-01

Full Text Available Objective: The present study was conducted to evaluate, on a longitudinal basis, the changes in intercanine and intermolar widths form the primary to the early mixed dentition periods. Materials and Methods: A total of 38 children aged 4-5 years, with normal occlusion without any proximal caries or any dental anomalies, were selected. The impressions were recorded and casts were prepared. Intercanine and intermolar widths were measured on these dental casts with the help of a digital vernier calliper. After 3 years follow-up, the impressions were recorded again and dental casts were prepared. Intercanine and intermolar widths were measured again at this stage and were compared with the baseline data using the paired t-test and the chi square test. Results: There is a significant increase in the intercanine (3.93 + 1.70 mm and intermolar width (1.49 + 1.77 mm during the transition period from primary to early mixed dentition in both the arches and both the sexes. The gender-wise comparison showed a greater increase in males than in females, but this was not statistically significant. Conclusion: A thorough knowledge of growth changes during various stages of the mixed dentition period are important for a pediatric dentist to make an accurate diagnosis and treatment planning during preventive and interceptive orthodontics.

Double aortic arch

Science.gov (United States)

Surgery can be done to fix double aortic arch. The surgeon ties off the smaller branch and separates it from the larger branch. Then the surgeon closes the ends of the aorta with stitches. This relieves pressure on the esophagus and windpipe.

Monitoring system of arch bridge for safety network management

Science.gov (United States)

Joo, Bong Chul; Yoo, Young Jun; Lee, Chin Hyung; Park, Ki Tae; Hwang, Yoon Koog

2010-03-01

Korea has constructed the safety management network monitoring test systems for the civil infrastructure since 2006 which includes airport structure, irrigation structure, railroad structure, road structure, and underground structure. Bridges among the road structure include the various superstructure types which are Steel box girder bridge, suspension bridge, PSC-box-girder bridge, and arch bridge. This paper shows the process of constructing the real-time monitoring system for the arch bridge and the measured result by the system. The arch type among various superstructure types has not only the structural efficiency but the visual beauty, because the arch type superstructure makes full use of the feature of curve. The main measuring points of arch bridges composited by curved members make a difference to compare with the system of girder bridges composited by straight members. This paper also shows the method to construct the monitoring system that considers the characteristic of the arch bridge. The system now includes strain gauges and thermometers, and it will include various sensor types such as CCTV, accelerometers and so on additionally. For the long term and accuracy monitoring, the latest optical sensors and equipments are applied to the system.

Developmental feature of the lumbosacral vertebral arch in childhood

International Nuclear Information System (INIS)

Yoshifuji, Kazuhisa; Morota, Nobuhito; Ihara, Satoshi

2007-01-01

We investigated a developmental feature of the lumbosacral vertebral arch in childhood that has rarely been reported previously. Sixty-seven patients underwent functional posterior rhizotomy from September 2000 to June 2006 at National Center for Child Health and Development. Sixty of these patients, who had no deformity in their lumbosacral spine, were included in this study and their Computed Tomography (CT) images were analyzed retrospectively. There were 36 boys and 24 girls, aged from 2-12 years. The rate and mean number of non-union vertebral arches between L1 and S3 were 78.3% (95% CI, 65.8-87.9%) and 1.7 (standard deviation (SD), 1.3). The non-union arch was most frequently found at the S1 level, and was more significantly observed in the younger age group (2-5 years of age). The S4 and S5 arches, which often remained open as the sacral hiatus, were constantly open in childhood. This study demonstrates that the vertebral arches of the lumbosacral spine in normal development are often not fused during childhood. It is important to differentiate normal non-union arches from pathological spina bifida. (author)

Evaluation of the intercanine distance in newborns with cleft lip and palate using 3D digital casts

Directory of Open Access Journals (Sweden)

Bianca Zeponi Fernandes Mello

2013-09-01

Full Text Available OBJECTIVE: The purpose of this present study was to compare, by means of 3D digital casts, the anterior transverse dimension of the dental arch of newborns with and without cleft lip and palate. MATERIAL AND METHODS: The sample was composed of ninety-four children aged from 3 to 9 months divided into three study groups: Group I - children without craniofacial deformities (control group; Group II - children with unilateral cleft lip and palate; Group III - children with bilateral cleft lip and palate. Impressions were executed before lip and palate repair in patients with clefts. Dental casts were digitized using a 3D scanner linked to a computer. Measurements of the intercanine distance were measured on the digital casts. Intergroup comparisons were performed using ANOVA (p<0.05. RESULTS: The results showed a mean of 36.5 mm for unilateral cleft lip and palate group, 34.8 mm for bilateral cleft lip and palate group and 27.52 mm for the control group. There was a statistically significant difference between the control group and both groups of patients with cleft lip and palate. There was no statistically significant difference between complete unilateral and bilateral cleft lip and palate groups. CONCLUSIONS: Patients with complete cleft lip and palate were born with an increased anterior dimension of the maxillary dental arch compared to non cleft patients.

Evaluation of the intercanine distance in newborns with cleft lip and palate using 3D digital casts

Science.gov (United States)

MELLO, Bianca Zeponi Fernandes; FERNANDES, Viviane Mendes; CARRARA, Cleide Felício Carvalho; MACHADO, Maria Aparecida Andrade Moreira; GARIB, Daniela Gamba; OLIVEIRA, Thais Marchini

2013-01-01

Objective The purpose of this present study was to compare, by means of 3D digital casts, the anterior transverse dimension of the dental arch of newborns with and without cleft lip and palate. Material and Methods The sample was composed of ninety-four children aged from 3 to 9 months divided into three study groups: Group I - children without craniofacial deformities (control group); Group II - children with unilateral cleft lip and palate; Group III - children with bilateral cleft lip and palate. Impressions were executed before lip and palate repair in patients with clefts. Dental casts were digitized using a 3D scanner linked to a computer. Measurements of the intercanine distance were measured on the digital casts. Intergroup comparisons were performed using ANOVA (p<0.05). Results The results showed a mean of 36.5 mm for unilateral cleft lip and palate group, 34.8 mm for bilateral cleft lip and palate group and 27.52 mm for the control group. There was a statistically significant difference between the control group and both groups of patients with cleft lip and palate. There was no statistically significant difference between complete unilateral and bilateral cleft lip and palate groups. Conclusions Patients with complete cleft lip and palate were born with an increased anterior dimension of the maxillary dental arch compared to non cleft patients. PMID:24212990

Transition from failing dentition to full-arch fixed implant-supported prosthesis with a staged approach using removable partial dentures: a case series.

Science.gov (United States)

Cortes, Arthur Rodriguez Gonzalez; Cortes, Djalma Nogueira; No-Cortes, Juliana; Arita, Emiko Saito

2014-06-01

The present retrospective case series is aimed at evaluating a staged approach using a removable partial denture (RPD) as an interim prosthesis in treatment to correct a failing dentition until such time as a full-arch fixed implant-supported prosthesis may be inserted. Eight patients, who had undergone maxillary full-arch rehabilitation with dental implants due to poor prognosis of their dentitions, were analyzed. All treatment included initial periodontal therapy and a strategic order of extraction of hopeless teeth. An RPD supported by selected teeth rehabilitated the compromised arch during implant osseointegration. These remaining teeth were extracted prior to definitive prosthesis delivery. Advantages and drawbacks of this technique were also recorded for the cases presented. Among the advantages provided by the staged approach are simplicity of fabrication, low cost, and ease of insertion. Additionally, RPD tooth support prevented contact between the interim prosthesis and healing abutments, promoting implant osseointegration. The main drawbacks were interference with speech and limited esthetic results. Implant survival rate was 100% within a follow-up of at least 1 year. The use of RPDs as interim prostheses allowed for the accomplishment of the analyzed rehabilitation treatments. It is a simple treatment alternative for patients with a low smile line. © 2013 by the American College of Prosthodontists.

A survey of U.S. prosthodontists and dental schools on the current materials and methods for final impressions for complete denture prosthodontics.

Science.gov (United States)

Petrie, Cynthia S; Walker, Mary P; Williams, Karen

2005-12-01

The purpose of this study was to survey members of The American College of Prosthodontists (ACP) to evaluate current materials and methods for final impressions for complete denture prosthodontics in the United States. In addition, those methods were compared with methods and materials taught in U.S. dental schools via a second survey sent to the chairpersons of prosthodontic/restorative departments. An anonymous questionnaire was mailed to all 1762 active ACP members in the United States in 2003. A slightly modified questionnaire was also distributed to chairpersons of prosthodontic/restorative departments in the 54 U.S. dental schools. Data analysis was performed via frequency distribution and chi-square statistics. Nine hundred and forty-five questionnaires were returned by members of the ACP (54% return rate) and 42 questionnaires were returned by the U.S. dental schools (78% return rate). The majority of the reporting prosthodontists (88%) and dental schools (98%) use a border-molded custom tray for final impressions for complete denture prosthodontics. The most popular material for border molding was plastic modeling compound (67% of reporting ACP members, and 95% of the responding dental schools). Variability of the materials used for final impressions was observed, with the most popular materials being polyvinylsiloxane for the ACP members (36%) and polysulfide for the dental schools (64%). Statistically significant differences were found in the materials used for border molding by prosthodontists based on the time elapsed since completion of prosthodontic training. No differences were found in the materials used for impression of edentulous arches based on years of experience. Geographic location did not influence the materials and methods used by prosthodontists for complete denture final impressions. There was variability of the materials and techniques used for final impressions by ACP members and dental schools; however, overall there was an agreement

The importance of dental aesthetics among dental students assessment of knowledge.

Science.gov (United States)

Manipal, Sunayana; Mohan, C S Anand; Kumar, D Lokesh; Cholan, Priyanka K; Ahmed, Adil; Adusumilli, Preethi

2014-01-01

The aim of this study is to assess the dental esthetics awareness among dental students in a private university in Chennai as none is available in Chennai, Tamil Nadu. The dental esthetics awareness questionnaire consisting of a battery of 19 questions under five aspects that is, physical, functional, social, knowledge, and psychological aspects was administered to a sample of 100 dental college students aged between 18 and 27 years in a private college in Chennai, India. Gender variations on the responses of their effects and the impact on dental esthetics awareness had been analyzed using a Chi-square test. With respect to physical aspects, pigmentation shows more significance as students want to get treated for their pigmentation of lips and gums. With respect to functional aspects, eating shows more significance as students have difficulty while eating. In social aspects, habits show more significance as it affects their esthetics. With respect to psychological aspects, mental depression shows more significance as students feel more deprived due to their unesthetic appearance. This study shows a high level of self-consciousness and the findings of the studies prove that even the slightest of variations have a greater impact on the above-mentioned dimensions in particular to psychological, functional, and physical aspects.

Dental erosion: understanding this pervasive condition.

Science.gov (United States)

Almeida e Silva, Júnio S; Baratieri, Luiz Narciso; Araujo, Edson; Widmer, Nicolas

2011-08-01

Dental erosion is a contemporary disease, mostly because of the change of the eating patterns that currently exist in society. It is a "silent" and multifactorial disease, and is highly influenced by habits and lifestyles. The prevalence of dental erosion has considerably increased, with this condition currently standing as a great challenge for the clinician, regarding the diagnosis, identification of the etiological factors, prevention, and execution of an adequate treatment. This article presents a dental erosion review and a case report of a restorative treatment of dental erosion lesions using a combination of bonded ceramic overlays to reestablish vertical dimension and composite resin to restore the worn palatal and incisal surfaces of the anterior upper teeth. Adequate function and esthetics can be achieved with this approach. © 2011 Wiley Periodicals, Inc.

Factors Affecting Dental Caries of Preschool Children in Shiraz, 2014

Science.gov (United States)

Shaghaghian, Soheila; Abolvardi, Masoud; Akhlaghian, Marzieh

2018-01-01

Statement of the Problem: Dental caries, the most common infectious disease, can lead to several consequences, including inflammation and bleeding of the gum, abscess formation, tooth loss, and subsequently loss of available space in the arch. Purpose: This study was designed to determine dental caries status of Shiraz preschool children and its related factors. Materials and Method: This cross-sectional study was conducted on the children registered in Shiraz kindergartens in 2014. The study recruited 453 children by randomized cluster sampling. We evaluated the children’s demographic and oral hygiene factors, and their dental caries status using decayed, missed, and filled tooth (dmft) index and prevalence of the children with untreated dental caries. Relationship between the children’s characteristics and their dental caries status was evaluated. Results: Only 119 children (30.1%) were caries-free. The children’s mean dmft index was 3.88(±3.9). After controlling the effect of confounding factors, the children’s dental caries status was significantly associated with variables indicating their socioeconomic status such as fathers’ job, mothers’ education, and number of children in the family. Furthermore, there was a significant association between the children’s dental caries status and their oral hygiene habits such as frequency of tooth brushing. Conclusion: The dental caries status of the studied preschool children was not desirable which could be indicative of the inadequacy of the current preventive programs. To improve this issue, interventional preventive programs such as tooth brushing are recommended. The programs are more necessary for the children of low socioeconomic families and those with poor oral hygiene habits. PMID:29854883

Outcomes of single-stage total arch replacement via clamshell incision

Directory of Open Access Journals (Sweden)

Ishizaka Toru

2011-09-01

Full Text Available Abstract Background Treatment of complex aortic pathologies involving the transverse arch with extensive involvement of the descending aorta remains a surgical challenge. Since clamshell incision provides superior exposure of the entire thoracic aorta, we evaluated the use of this technique for single-stage total arch replacement by arch vessel reconstruction. Methods The arch-first technique combined with clamshell incision was used in 38 cases of aneurysm and aortic disease in 2008 and 2009. Extensive total arch replacement was used with clamshell incision for reconstruction of arch vessels under deep hypothermic circulatory arrest. Results Overall 30-day mortality was 13%. The mean operating time was approximately 8 hours. Deep hypothermia resulted in mean CPB time exceeding 4.5 hours and mean duration of circulatory arrest was 25 minutes. The overall postoperative temporary and permanent neurologic dysfunction rates were 3% and 3% for elective and 3% and 0% for emergency surgery, respectively. All patients except the five who died in hospital were discharged without nursing care after an average post-operative hospital stay of 35 days. Conclusions The arch-first technique, combined with clamshell incision, provides expeditious replacement of the thoracic aorta with an acceptable duration of hypothermic circulatory arrest and minimizes the risk of retrograde atheroembolism by using antegrade perfusion.

Super-light pearl-chain arch vaults

DEFF Research Database (Denmark)

Hertz, Kristian Dahl; Halding, Philip Skov

2014-01-01

Arch vaults are known as optimal and impressive structures, but due to their curved shapes they are extremely costly to produce in countries, where the cost of labor is high. By means of super-light pearl-chain technology arch vaults can be constructed from equal plane prefabricated elements, which...... that it is also applicable as basic elements for super-light pearl-chain vaults. Machines and software have been developed for automatic mass production of the elements, and the first factory has started production in Denmark in 2014 delivering SL-deck elements for a variety of building projects. This means...... is known from curved voluminous elements. The paper describes the first full-scale test of an arch vault made of SL-deck elements demonstrating the principle, documenting the load-bearing capacity, and solving a number of details needed in order to create vaults in practice. Considerations and plans...

Panoramic dental radiography image intensification employing minification techniques

International Nuclear Information System (INIS)

Cushman, R.H.

1981-01-01

Panoramic dental x-ray machine wherein an x-ray source-camera assembly orbits a seated patient is described. A slot in the camera assembly collimates the x-rays which are continuously generated by the x-ray source, which x-rays are converted to light images of the patient's dental arch structure by only a single intensifying screen which remains stationary. This screen comprises about 1/40 the area of conventional intensifying screens and is made thicker for providing improved detection efficiency. A fiber optic minifying lens reduces the size of the image from the screen while proportionately increasing the light intensity of the image, thus making it possible to provide useable film images at reduced x-ray exposures due to non-linear film exposure versus optical density characteristics. The resultant minified, light-intensified image may now be recorded on 35 mm roll film, for example, as opposed to standard radiographic film of 5'' X 12'' size, or 12.70 cm X 30.48 cm

Plastic collapse load of crown-hinged steel circular arches : a theoretical method

NARCIS (Netherlands)

Spoorenberg, R.C.; Snijder, H.H.; Hoenderkamp, J.C.D.

2013-01-01

For construction purposes and to avoid detrimental influences of foundation settlements arches are not always made from a single arch-rib but are built by connecting two curvilinear elements at the crown with a hinge. These arches are also known as crown-hinged arches. This paper presents an

Agenesis of the posterior arch of the atlas

Directory of Open Access Journals (Sweden)

Torriani Martin

2002-01-01

Full Text Available PURPOSE: To illustrate the radiological findings and review the current literature concerning a rare congenital abnormality of the posterior arch of the atlas. CASE REPORT: An adult female without neurological symptoms presented with an absent posterior arch of the atlas, examined with plain films and helical computerized tomography. Complete agenesis of the posterior arch of the atlas is a rare entity that can be easily identified by means of plain films. Although it is generally asymptomatic, atlantoaxial instability and neurological deficits may occur because of structural instability. Computerized tomography provides a means of assessing the extent of this abnormality and can help evaluate the integrity of neural structures. Although considered to be rare entities, defects of the posterior arch of the atlas may be discovered as incidental asymptomatic findings in routine cervical radiographs. Familiarity with this abnormality may aid medical professionals in the correct management of these cases.

Modified protrusion arch for anterior crossbite correction - a case report.

Science.gov (United States)

Roy, Abhishek Singha; Singh, Gulshan Kr; Tandon, Pradeep; Chaudhary, Ramsukh

2013-01-01

Borderline and mild skeletal Class III relationships in adult patients are usually treated by orthodontic camouflage. Reasonably rood results have been achieved with nonsurgical teatment of anterior crossbite. Class III malocclusion may be associated with mandibular prognathism, maxillary retrognathism, or both. Class III maxillary retrognathism generally involves anterior crossbite, which must be opened if upper labial brackets are to be bonded. If multiple teeth are in crossbite, after opening the bite usual step is to ligate forward or advancement arch made of 0.018" or 0.020" stainless steel or NiTi wire main arch that must be kept separated 2 mm from the slot ofupper incisor braces. Two stops or omegas are made 1 mm mesial to the tubes of the molar bands that will impede main arch from slipping,and in this manner the arch will push the anterior teeth forward Here we have fabricated a modified multiple loop protrusion arch to correct an anterior crossbite with severe crowding that was not amenable to correct by advancement arches.

Impact of Removable Partial Dental Prostheses on the Oral Health-Related Quality of Life of a South African Cohort with Varied Distributions of Missing Posterior Teeth.

Science.gov (United States)

Khan, Sadika; Chikte, Usuf; Omar, Ridwaan

2017-10-25

To determine the impact of removable partial dental prostheses on satisfying the daily functioning and quality of life (QoL) of adult patients with different distributions of missing posterior teeth. A cross-sectional interventional study was carried out on 80 patients having variously distributed posteriorly shortened and interrupted arches. Treatment comprised provision of partial dentures by senior dental students, supervised by senior clinical teachers who had knowledge of the potential benefits of the shortened dental arch (SDA) concept. The Oral Impacts on Daily Performance Index was completed before and 6 months after prosthetic treatment across groups comprising Kennedy Classes I, II, and III arches. Analysis included descriptive statistics and associations and comparisons between variables. Mean age of patients was 57.4 years (SD = 13.1), many were retired (72.2%), and a majority were females (60%). Most patients lived in urban areas (95%), and were largely unemployed (63.3%). At pretreatment, only 31.3% of patients reported having good dental health and satisfaction with their current oral state, while 82.5% said they had a great need for treatment. The negative oral impacts that were most frequently experienced were those of eating (67.5%), smiling (50%), and being emotionally disturbed (63.8%). Post-treatment, 76.3% indicated good oral health and satisfaction with no significant differences between the 3 Kennedy groups. Any further negative impacts were reported mostly for Kennedy Classes I and II. Overall, significant reductions of negative impacts were observed following treatment with dentures, across the 3 Kennedy groups, with respect to improved function, satisfaction, and oral health-related QoL. The findings confirm the reliance by partially dentate patients in all 3 Kennedy groups on dentures for improved oral health, although the possible benefits of the SDA concept as an alternative treatment option was not specifically explored. © 2017 by

Relationship between Dental Anxiety and Health Locus of Control among Physiotherapy Students

Directory of Open Access Journals (Sweden)

Pooja Agarwal

2013-01-01

Materials & Method: A total of 152 students participated in the study. Dental anxiety was assessed using the 5 item Modified Dental Anxiety Scale (MDAS and Locus of Control was assessed using the 18 item Multidimensional Health Locus of Control (MHLC scale. Results: A Statistically significant positive correlation was found between the internal dimension of MHLC and dental anxiety. Conclusions: HLC was found to play an important role in predicting the dental anxiety among physiotherapy students.

A case of complete double aortic arch visualized by transthoracic echocardiography.

Science.gov (United States)

Saito, Naka; Kato, Shingo; Saito, Noritaka; Nakachi, Tatsuya; Fukui, Kazuki; Iwasawa, Tae; Kosuge, Masami; Kimura, Kazuo

2017-08-01

A case of double aortic arch that was well visualized using transthoracic echocardiography is reported. A 38-year-old man underwent transthoracic echocardiography for the evaluation of dyspnea. A suprasternal view of transthoracic echocardiography showed the ascending aorta bifurcate to left and right aortic arches, with blood flow from the ascending aorta to bilateral aortic arches. The diagnosis of right side-dominant double aortic arch was made, and the patient's symptom was conceivably related to compression of the trachea due to a vascular ring. This report indicates the potential usefulness of transthoracic echocardiography for noninvasive detection of double aortic arch in adults. © 2017, Wiley Periodicals, Inc.

Comparative study on the mechanical mechanism of confined concrete supporting arches in underground engineering.

Science.gov (United States)

Lv, Zhijin; Qin, Qian; Jiang, Bei; Luan, Yingcheng; Yu, Hengchang

2018-01-01

In order to solve the supporting problem in underground engineering with high stress, square steel confined concrete (SQCC) supporting method is adopted to enhance the control on surrounding rocks, and the control effect is remarkable. The commonly used cross section shapes of confined concrete arch are square and circular. At present, designers have no consensus on which kind is more proper. To search for the answer, this paper makes an analysis on the mechanical properties of the two shapes of the cross-sections. A full-scale indoor comparative test was carried out on the commonly used straight-wall semi-circular SQCC arch and circular steel confined concrete arch (CCC arch). This test is based on self-developed full-scale test system for confined concrete arch. Our research, combining with the numerical analysis, shows: (1) SQCC arch is consistent with CCC arch in the deformation and failure mode. The largest damages parts are at the legs of both of them. (2) The SQCC arch's bearing capability is 1286.9 kN, and the CCC arch's ultimate bearing capability is 1072.4kN. Thus, the SQCC arch's bearing capability is 1.2 times that of the CCC arch. (3) The arches are subjected to combined compression and bending, bending moment is the main reason for the arch failure. The section moment of inertia of SQCC arch is 1.26 times of that of CCC arch, and the former is better than the latter in bending performance. The ultimate bearing capacity is positively correlated with the size of the moment of inertia. Based on the above research, the engineering suggestions are as follows: (1) To improve the bearing capacity of the arch, the cross-sectional shape of the chamber should be optimized and the arch bearing mode changed accordingly. (2) The key damaged positions, such as the arch leg, should be reinforced, optimizing the state of force on the arch. SQCC arches should be used for supporting in underground engineering, which is under stronger influence of the bending moment and

[To bite or to scan? Dental impressions with alginate, PVS or -intra-oral scanning; processing time and patient comfort. A pilotstudy].

Science.gov (United States)

Darroudi, M; Ariens, Z P A; Zinsmeister, V Z; Breuning, K H

2017-02-01

In recent years technology has enabled dental professionals to make digital dental models using intra-oral scanners. In a study involving 10 test cases, a comparison was made between the digital impression technique and 2 -conventional impression techniques, using alginate and Polivinyl Syloxane™. With the 3 different techniques, dental impressions were made of the lower and upper arches; the processing time required for each and the differences in patient comfort were recorded. The individuals in the test cases experienced no difference in comfort between the alginate and the digital impression. The impression technique involving Polivinyl Syloxane™ was experienced as less comfortable. The digital impression technique appeared to be the most time consuming.

Posttreatment quantification of patient experiences with full-arch implant treatment using a modification of the OHIP-14 questionnaire.

Science.gov (United States)

Babbush, Charles A

2012-06-01

Patient well-being is always the goal of rehabilitation of edentulism; however, evaluations of treatment success often overlook the patient's subjective feelings about comfort, function, speech, social image, social inhibitions, psychological discomfort, and/or disabilities. The purpose of this study was to assess these patient responses using an oral health questionnaire. To assess such feelings, a self-administered 20-question multiple-choice patient-reported Edentulous Patient Impact Questionnaire was developed, based upon the previously validated Oral Health Impact Profile patient-assessment tool. Responses were solicited from randomly selected patients treated with an implant-supported, fixed, immediately loaded full arch prosthesis. The questionnaires were completed by 250 patients. Of the respondents, 95% described themselves as being either extremely satisfied (74%) or satisfied (21%) with their new teeth, and 98% said they would definitely recommend similar treatment (88%) or consider recommending it (10%) to a friend or colleague. Based upon an oral health impact survey completed by 250 patients treated with full-arch implant-supported, immediately loaded fixed dental prostheses, it appears that patient satisfaction is high and that treated patients would generally be willing to recommend this treatment to others.

Level-ARCH Short Rate Models with Regime Switching

DEFF Research Database (Denmark)

Christiansen, Charlotte

This paper introduces regime switching volatility into level- ARCH models for the short rates of the US, the UK, and Germany. Once regime switching and level effects are included there are no gains from including ARCH effects. It is of secondary importance exactly how the regime switching is spec...

Evaluation of dimensional stability of Iralgin and Alginoplast alginates after disinfection by sodium hypochlorite (5.2% with immersion and spraying methods

Directory of Open Access Journals (Sweden)

Vojdani M

2006-01-01

Full Text Available Background and Aim: Infection control is an integral part of dentistry and dental impressions are considered an important issue in cross contamination. The aim of this study was to investigate the dimensional stability of two irreversible hydrocolloid materials, Alginoplast and Iralgin after disinfection with 5.2% sodium hypochlorite, used with immersion and spraying methods. Material and Methods: In this experimental study, impressions were made of a master mandibular arch (Typodont containing three stainless steel inserts on the occlucal surface of both mandibular first molars and in the lingual surface of the mandibular central incisors, which served as reference marks for making measurements. Two types of irreversible hydrocolloid (Iralgin and Alginoplast were tested. 5.2% sodium hypochlorite was used in two methods of spraying and immersion to disinfect the samples. The control group was not disinfected. Casts were made of type III gypsum. Stone casts were measured with a Nikon profile projector.Kruskall-Wallis and Mann-Witney test were used for statistical analysis using p<0.05 as the limit of significance. Results: Casts prepared from Alginoplast disinfected by spraying method, were 0.38 % larger in anteroposterior and 0.06% smaller in cross arch dimensions, whereas those prepared from Alginoplast immersed in hypochlorite were 0.47% larger in anteroposterior and 0.11% smaller in cross arch dimensions. Casts made from Iralgin were smaller after both methods of disinfecting, (0.01% smaller in anteroposterior and 0.001% smaller in cross-arch dimensions after spraying and 0.04% smaller in anteroposterior and 0.03% smaller in cross-arch dimensions after immersing in sodium hypochlorite. Conclusion: Alginoplast and Iralgin impressions can be immersed or sprayed for disinfection without compromising the accuracy needed for diagnostic and opposing casts, as well as removable partial denture construction.

L’archéologie enfermée dehors. Retour sur un malentendu français

Directory of Open Access Journals (Sweden)

Blaise Dufal

2010-06-01

Full Text Available Le projet de l’anthropologie historique fait de la notion de culture matérielle le lieu de rencontre entre l’histoire et l’archéologie. Mais cette rencontre, réelle et fructueuse dans de nombreux travaux, n’a pas réellement modifié les représentations épistémologiques de l’archéologie, et ses relations avec l’histoire. Alors qu’elle jouissait d’un fort prestige à la fin du xixe siècle, l’archéologie est plutôt ignorée par les premières générations des Annales. L’archéologie reste encore considérée comme une discipline mineure, qui complète les connaissances mais n’est pas déterminante dans leur interprétation. Cette situation déplorable est liée à la position intermédiaire de l’archéologie, entre nature et culture. Mais aujourd’hui cette science sociale hybride de l’objet débordant, assume finalement pleinement la dimension du bricolage interdisciplinaire, et peut être considérée comme une attitude modèle pour la pratique concrète de l’historien dans ses rapports avec les autres sciences humaines et sociales.The project of historical anthropology makes history and archaeology meet within the notion of material culture. However real and fruitful, such an encounter has not truly modified epistemological representations of archaeology or the latter’s relation to history. While archaeology proved most prestigious at the end of the 19th century, the first generation of the Annales tended to leave it aside. Archaeology is still considered as a minor subject, only providing further knowledge without ever shaping interpretation. This is due to the intermediary position held by archaeology, halfway between nature and culture. But today, this hybrid social science of objects takes on the full dimension of interdisciplinary bricolage and may be considered as a model pattern for the concrete practice of historians’ relations to other human and social sciences.Nel progetto dell�

[Discomfort associated with dental extraction surgery and development of a questionnaire (QCirDental). Part I: Impacts and internal consistency].

Science.gov (United States)

Bortoluzzi, Marcelo Carlos; Martins, Luciana Dorochenko; Takahashi, André; Ribeiro, Bianca; Martins, Ligiane; Pinto, Marcia Helena Baldani

2018-01-01

The scope of this study was to develop and validate a questionnaire (QCirDental) to measure the impacts associated with dental extraction surgery. The QCirDental questionnaire was developed in two steps; (1) question and item generation and selection, and (2) pretest of the questionnaire with evaluation of the its measurement properties (internal consistency and responsiveness). The sample was composed of 123 patients. None of the patients had any difficulty in understanding the QCirDental. The instrument was found to have excellent internal consistency with Cronbach's alpha reliability coefficient of 0.83. The principal component analysis (Kaiser-Meyer-Olkin Measure of Sampling Adequacy 0,72 and Bartlett's Test of Sphericity with p < 0.001) showed six (6) dimensions explaining 67.5% of the variance. The QCirDental presented excellent internal consistency, being a questionnaire that is easy to read and understand with adequate semantic and content validity. More than 80% of the patients who underwent dental extraction reported some degree of discomfort within the perioperative period which highlights the necessity to assess the quality of care and impacts of dental extraction surgery.

In vivo Study of the Accuracy of Dual-arch Impressions.

Science.gov (United States)

de Lima, Luciana Martinelli Santayana; Borges, Gilberto Antonio; Junior, Luiz Henrique Burnett; Spohr, Ana Maria

2014-06-01

This study evaluated in vivo the accuracy of metal (Smart®) and plastic (Triple Tray®) dual-arch trays used with vinyl polysiloxane (Flexitime®), in the putty/wash viscosity, as well as polyether (Impregum Soft®) in the regular viscosity. In one patient, an implant-level transfer was screwed on an implant in the mandibular right first molar, serving as a pattern. Ten impressions were made with each tray and impression material. The impressions were poured with Type IV gypsum. The width and height of the pattern and casts were measured in a profile projector (Nikon). The results were submitted to Student's t-test for one sample (α = 0.05). For the width distance, the plastic dual-arch trays with vinyl polysiloxane (4.513 mm) and with polyether (4.531 mm) were statistically wider than the pattern (4.489 mm). The metal dual-arch tray with vinyl polysiloxane (4.504 mm) and with polyether (4.500 mm) did not differ statistically from the pattern. For the height distance, only the metal dual-arch tray with polyether (2.253 mm) differed statistically from the pattern (2.310 mm). The metal dual-arch tray with vinyl polysiloxane, in the putty/wash viscosities, reproduced casts with less distortion in comparison with the same technique with the plastic dual-arch tray. The plastic or metal dual-arch trays with polyether reproduced cast with greater distortion. How to cite the article: Santayana de Lima LM, Borges GA, Burnett LH Jr, Spohr AM. In vivo study of the accuracy of dual-arch impressions. J Int Oral Health 2014;6(3):50-5.

The effect of impression volume and double-arch trays on the registration of maximum intercuspation.

Science.gov (United States)

Hahn, Sara M; Millstein, Philip L; Kinnunen, Taru H; Wright, Robert F

2009-12-01

The type of double-arch trays used may affect occlusion. The purpose of this study was to determine what effect, if any, double-arch tray design and impression material volume had on the registration of maximum intercuspation (MI). Quadrant impressions were made on articulated fracture-resistant dental casts mounted in maximum intercuspation occlusion. Three types of sideless double-arch impression trays were used: First Bite with nylon webbing, Sultan's 3-Way with double crosshatch webbing, and Premium's 3-in-1 Tray with single crosshatch webbing. Vinyl polysiloxane impression material (Aquasil Ultra Rigid Fast Set) was distributed at 2 different volumes (5.4 ml and 8.3 ml), and 60 impressions were made (n=10). A weight of 1.2 kg was placed on the upper arm of an Artex articulator, ensuring complete closure. The impressions were allowed to polymerize for 5 minutes. After polymerization, specimens were placed on a light box, and a camera set at a fixed distance was used to capture the light transmission that was projected through the impression material. The camera transferred the information to an image analysis program (ImageJ). This system allowed the different amounts of light projected through the impression to be translated into a gray scale value (GSV), which was assigned a thickness value, in millimeters, of a specified occlusal contact area. To assess reliability of the experimental design, 10 control impressions were made by directly applying impression material onto the typodont. These were analyzed in the same manner as the impressions made with trays. A 2-way ANOVA comparing volume by tray type was used (alpha=.05). This was followed by a Tukey HSD test. There was no main effect for volume of impression material (P=.71). Tray type was significantly different (Precord making.

HSPG-deficient zebrafish uncovers dental aspect of multiple osteochondromas.

Directory of Open Access Journals (Sweden)

Malgorzata I Wiweger

Full Text Available Multiple Osteochondromas (MO; previously known as multiple hereditary exostosis is an autosomal dominant genetic condition that is characterized by the formation of cartilaginous bone tumours (osteochondromas at multiple sites in the skeleton, secondary bursa formation and impingement of nerves, tendons and vessels, bone curving, and short stature. MO is also known to be associated with arthritis, general pain, scarring and occasional malignant transformation of osteochondroma into secondary peripheral chondrosarcoma. MO patients present additional complains but the relevance of those in relation to the syndromal background needs validation. Mutations in two enzymes that are required during heparan sulphate synthesis (EXT1 or EXT2 are known to cause MO. Previously, we have used zebrafish which harbour mutations in ext2 as a model for MO and shown that ext2⁻/⁻ fish have skeletal defects that resemble those seen in osteochondromas. Here we analyse dental defects present in ext2⁻/⁻ fish. Histological analysis reveals that ext2⁻/⁻ fish have very severe defects associated with the formation and the morphology of teeth. At 5 days post fertilization 100% of ext2⁻/⁻ fish have a single tooth at the end of the 5(th pharyngeal arch, whereas wild-type fish develop three teeth, located in the middle of the pharyngeal arch. ext2⁻/⁻ teeth have abnormal morphology (they were shorter and thicker than in the WT and patchy ossification at the tooth base. Deformities such as split crowns and enamel lesions were found in 20% of ext2⁺/⁻ adults. The tooth morphology in ext2⁻/⁻ was partially rescued by FGF8 administered locally (bead implants. Our findings from zebrafish model were validated in a dental survey that was conducted with assistance of the MHE Research Foundation. The presence of the malformed and/or displaced teeth with abnormal enamel was declared by half of the respondents indicating that MO might indeed be also associated

Dentoskeletal outcomes of a rapid maxillary expander with differential opening in patients with bilateral cleft lip and palate: A prospective clinical trial

Science.gov (United States)

Garib, Daniela; De Cássia Moura Carvalho Lauris, Rita; Calil, Louise Resti; De Medeiros Alves, Arthur César; Janson, Guilherme; De Almeida, Araci Malagodi; Cevidanes, Lúcia Helena Soares; Lauris, José Roberto Pereira

2017-01-01

Introduction The purpose of this 2-arm parallel study was to evaluate the dentoskeletal effects of rapid maxillary expansion with differential opening (EDO) compared with the hyrax expander in patients with complete bilateral cleft lip and palate. Methods A sample of patients with complete bilateral cleft lip and palate was prospectively and consecutively recruited. Eligibility criteria included participants in the mixed dentition with lip and palate repair performed during early childhood and maxillary arch constriction with a need for maxillary expansion before the alveolar bone graft procedure. The participants were consecutively divided into 2 study groups. The experimental and control groups comprised patients treated with rapid maxillary expansion using EDO and the hyrax expander, respectively. Cone-beam computed tomography examinations and digital dental models of the maxillary dental arches were obtained before expansion and 6 months postexpansion. Standardized cone-beam computed tomography coronal sections were used for measuring maxillary transverse dimensions and posterior tooth inclinations. Digital dental models were used for assessing maxillary dental arch widths, arch perimeters, arch lengths, palatal depths, and posterior tooth inclinations. Blinding was used only during outcome assessment. The chi-square test was used to compare the sex ratios between groups (P <0.05). Intergroup comparisons were performed using independent t tests with the Bonferroni correction for multiple tests. Results Fifty patients were recruited and analyzed in their respective groups. The experimental group comprised 25 patients (mean age, 8.8 years), and the control group comprised 25 patients (mean age, 8.6 years). No intergroup significant differences were found for age, sex ratio, and dentoskeletal variables before expansion. No significant differences were found between the EDO and the hyrax expander groups regarding skeletal changes. The EDO promoted significantly

First Branchial Arch Fistula: A Rarity and a Surgical Challenge.

Science.gov (United States)

Rajkumar, J S; Ganesh, Deepa; Anirudh, J R; Akbar, S; Joshi, Niraj

2016-06-01

Although 2(nd) Branchial arch fistulae (from incomplete closure of Cervical sinus of His) are well known, 1(st) arch fistulae are much rarer (branchial arch fistula of the type II Arnot classification, which presented with two external openings of more than 20 years duration. Patient had a successful resection of all the concerned fistulous tract. Review of literature and the surgical challenges of the procedure are presented herewith.

Decoronation followed by dental implants placement: fundamentals, applications and explanations

Science.gov (United States)

Consolaro, Alberto; Ribeiro, Paulo Domingos; Cardoso, Maurício A.; Miranda, Dario A. Oliveira; Salfatis, Monica

2018-01-01

ABSTRACT Dental arches areas with teeth presenting dentoalveolar ankylosis and replacement root resorption can be considered as presenting normal bone, in full physiological remodeling process; and osseointegrated implants can be successfully placed. Bone remodeling will promote osseointegration, regardless of presenting ankylosis and/or replacement root resorption. After 1 to 10 years, all dental tissues will have been replaced by bone. The site, angulation and ideal positioning in the space to place the implant should be dictated exclusively by the clinical convenience, associated with previous planning. One of the advantages of decoronation followed by dental implants placement in ankylosed teeth with replacement resorption is the maintenance of bone volume in the region, both vertical and horizontal. If possible, the buccal part of the root, even if thin, should be preserved in the preparation of the cavity for the implant, as this will maintain gingival tissues looking fully normal for long periods. In the selection of cases for decoronation, the absence of microbial contamination in the region - represented by chronic periapical lesions, presence of fistula, old unconsolidated root fractures and active advanced periodontal disease - is important. Such situations are contraindications to decoronation. However, the occurrence of dentoalveolar ankylosis and replacement resorption without contamination should neither change the planning for implant installation, nor the criteria for choosing the type and brand of dental implant to be used. Failure to decoronate and use dental implants has never been reported. PMID:29791693

Dental health status and treatment needs of transport workers of a northern Indian city: A cross-sectional study

Science.gov (United States)

Gambhir, Ramandeep S.; Sogi, Girish M.; Veeresha, Koratagere Lingappa; Sohi, Ramandeep K.; Randhawa, Amaninder; Kakar, Heena

2013-01-01

Aim: To assess the dental health status and treatment needs of transport workers working in Chandigarh Transport Undertaking (C.T.U.) buses, Chandigarh. Materials and Methods: A cross-sectional study was conducted on all the available C.T.U. workers at all three bus depots. The data were recorded on a modified W.H.O. format (1997). A total of 1008 subjects constituted the final sample size. Results: The mean age of the subjects was 45.3 ± 7.8 years, and 97% (978) were males. Prevalence of dental caries was 63.4% and mean DMFT was 5.02. 47.6% of subjects needed some prosthesis in the maxillary arch while 53.3% needed some prosthesis in the mandibular arch. Regarding highest CPI (Community Periodontal Index) score, 8.13% of the subjects had healthy periodontium while maximum subjects (73.2%) had a score 2 (Calculus). Conclusion: Mean DMFT (Decayed, Missing and Filled Teeth) was satisfactory. Prosthetic need of the subjects was high with only a few subjects possessing prosthesis. Advanced periodontal disease (CPI score, 4) affected small number of subjects with maximum subjects (73%) having a CPI score of 2. PMID:24082750

Lucy's flat feet: the relationship between the ankle and rearfoot arching in early hominins.

Directory of Open Access Journals (Sweden)

Jeremy M DeSilva

Full Text Available BACKGROUND: In the Plio-Pleistocene, the hominin foot evolved from a grasping appendage to a stiff, propulsive lever. Central to this transition was the development of the longitudinal arch, a structure that helps store elastic energy and stiffen the foot during bipedal locomotion. Direct evidence for arch evolution, however, has been somewhat elusive given the failure of soft-tissue to fossilize. Paleoanthropologists have relied on footprints and bony correlates of arch development, though little consensus has emerged as to when the arch evolved. METHODOLOGY/PRINCIPAL FINDINGS: Here, we present evidence from radiographs of modern humans (n = 261 that the set of the distal tibia in the sagittal plane, henceforth referred to as the tibial arch angle, is related to rearfoot arching. Non-human primates have a posteriorly directed tibial arch angle, while most humans have an anteriorly directed tibial arch angle. Those humans with a posteriorly directed tibial arch angle (8% have significantly lower talocalcaneal and talar declination angles, both measures of an asymptomatic flatfoot. Application of these results to the hominin fossil record reveals that a well developed rearfoot arch had evolved in Australopithecus afarensis. However, as in humans today, Australopithecus populations exhibited individual variation in foot morphology and arch development, and "Lucy" (A.L. 288-1, a 3.18 Myr-old female Australopithecus, likely possessed asymptomatic flat feet. Additional distal tibiae from the Plio-Pleistocene show variation in tibial arch angles, including two early Homo tibiae that also have slightly posteriorly directed tibial arch angles. CONCLUSIONS/SIGNIFICANCE: This study finds that the rearfoot arch was present in the genus Australopithecus. However, the female Australopithecus afarensis "Lucy" has an ankle morphology consistent with non-pathological flat-footedness. This study suggests that, as in humans today, there was variation in arch

Crozat appliance therapy for an arch-length discrepancy problem.

Science.gov (United States)

Parker, M

1991-01-01

The case involved a white male subject, aged 10 years 6 months, with a Class I molar relationship complicated by a deep overbite and impaction of all four permanent canines, which were completely blocked out of the arches. The growth rate of the arches was found to be abnormal, and there was premature loss of the deciduous teeth. Over a period of approximately 5 years, with intermittent pauses to allow growth to catch up with treatment, the Crozat removable appliance was used to help establish the arch form and correct the plane of occlusion.

Motivating your patients: marketing dental services.

Science.gov (United States)

Grönroos, C; Masalin, K

1990-02-01

In most industrialized countries the issues of unemployment or under-employment are becoming more critical for the members of the dental associations. In some countries this is creating greater competition between the private practitioners and public health dentists as well as between private dental practitioners themselves. Modern marketing, especially service marketing theory and models, can provide dentists and dental associations with tools to improve their position in relation to patients, political decision makers and other public agencies. However, marketing has to be understood correctly as a philosophy providing a means of approaching the establishing, maintaining and enhancing patient or customer relationships and not as a narrowly defined set of tools. As long as marketing is considered to be external campaigns, such as advertising and not much else, it is bound to fail. Other dimensions of marketing, such as interactive marketing and internal marketing, are of much greater importance to dental practitioners.

Dental students' motivation and the context of learning.

Science.gov (United States)

Kristensen, Bettina Tjagvad; Netterstrom, Ingeborg; Kayser, Lars

2009-02-01

This qualitative study shows dental students' motives for choosing the dental education and how the motives influence their motivation at the first semester of study. Further the study demonstrates the relevance of the context of learning. This issue is of importance when planning a curriculum for the dental education. The material consists of interviews with eight dental students. The results show that dental students were focused on their future professional role, its practical dimensions and their future working conditions. Their motivation for choosing the dental education was found to influence their motivation for studying and their experience of the relevance of the first semester. The dental students who had co-education with the medical students at the first year of study missed a dental context and courses with clinically relevant contents. In conclusion, our data signify the importance of the context of learning. It is recommended that a future curriculum for the dental school should be designed in a way where basic science subjects are taught with both theoretically as well as practically oriented subjects and in a context which is meaningful for the students.

Contrast-enhanced magnetic resonance angiography of persistent fifth aortic arch in children

International Nuclear Information System (INIS)

Zhong, Yumin; Zhu, Ming; Sun, Aimin; Li, Yuhua; Jaffe, Richard B.; Gao, Wei

2007-01-01

Cine angiography and echocardiography have been utilized to diagnose congenital aortic arch anomalies. However, the visualization of great vessels by echocardiography is limited, while cine angiography requires cardiac catheterization with ionizing radiation. Contrast-enhanced magnetic resonance angiography (MRA) is a noninvasive modality suitable for visualization of congenital aortic arch anomalies. To evaluate the utility of contrast-enhanced MRA in the diagnosis of persistent fifth aortic arch, a rare congenital aortic arch anomaly, and to compare the diagnostic accuracy of MRA with that of echocardiography and cine angiography. In four pediatric patients, contrast-enhanced MRA studies were performed for diagnosing persistent fifth aortic arch. The findings of MRA were compared with echocardiographic findings and confirmed by cine angiography and operation. Transthoracic surface echocardiography noted an aberrant vessel arising from the ascending aorta in two of four patients; the etiology of this vessel was uncertain. In the other two patients a diagnosis of coarctation was made. Of the four patients, only one was diagnosed with interruption of the aortic arch. Contrast-enhanced MRA clarified uncertain echocardiographic findings, enabling the correct diagnosis of persistent fifth aortic arch with fourth aortic arch interruption in all four patients. Contrast-enhanced MRA is a safe, accurate, and fast imaging technique for the evaluation of persistent fifth aortic arch and may obviate the need for conventional cine angiography. Cardiac catheterization may be reserved for some types of complicated congenital heart disease and for obtaining hemodynamic information. (orig.)

Is the South African exchange rate volatile? Application of the arch framework.

Directory of Open Access Journals (Sweden)

Thato Julius Mokoma

2015-04-01

Full Text Available This study applies the autoregressive conditional heteroscedasticity (ARCH model to forecast exchange rate volatility in South Africa for the period 1990Q1 to 2014Q2. The ARCH (1 and ARCH (2 models were constructed using four variables; namely, exchange rate, gross domestic product, inflation and interest rates. Upon addressing the issue of stationarity, the models were fitted and the ARCH (1 model was found to be fit. This model revealed a high volatility of exchange rate compared to the ARCH (2 model. Prior to forecasting, the selected model was subjected to a battery of diagnostics tests and was found to be stable and well specified. The forecasts from the ARCH (1 model proved that in the near future, exchange rate will not be highly volatile though SA will experience depreciation in its currency.

Prenuptial dental extractions in Acadian women: first report of a cultural tradition.

Science.gov (United States)

Gordon, Sara C; Kaste, Linda M; Barasch, Andrei; Safford, Monika M; Foong, W Choong; ElGeneidy, Adry

2011-12-01

Prenuptial tooth extractions, extractions of all teeth in at least one dental arch before marriage, are not identified in the dental literature. Driven by a professional encounter, the purpose of this study was to confirm the existence of this practice among Acadian women. An 8-item survey instrument with space for comments was mailed to 182 dentists from traditionally Acadian regions of Canada. The survey was provided in English and French. Ninety dentists responded (50.3%); 8 of them (9%) had been asked to perform prenuptial extractions, and an additional 9 volunteered awareness of this practice. Awareness and requests were associated with dental practice in a county with a ≥20% French-speaking population. Prenuptial extractions in this population have been confirmed by the current cohort of dentists. The potential public health, clinical, and systemic health research implications for women who are edentulous for most of their adult life merit further study. Additionally, it is important to determine if interventions are needed to curtail cultural expectations of such practices.

Twelve-month space changes after premature loss of a primary maxillary first molar.

Science.gov (United States)

Lin, Yai-Tin; Lin, Wen-Hsien; Lin, Yng-Tzer J

2011-05-01

Many early investigations concerning space changes following premature extraction of primary molars had a cross-sectional design, a small sample size, and a somewhat crude methodology, which may have led to misunderstandings. The aim of this study was to use established longitudinal data to investigate ongoing (12-month) dental-arch space problems arising as a result of premature loss of a primary maxillary first molar. Thirteen children (mean ± SD age at time of tooth extraction, 6.0 ± 0.74 years) with unilateral premature loss of a primary maxillary first molar were selected for this study. Maxillary dental study casts were obtained from participants 2 or 3 days after the tooth was removed, as well as at a follow-up appointment 12 months later. Six reference lines were measured on the study cast: D + E space, arch width, arch length, intercanine width, intercanine length, and arch perimeter. For each participant, the D + E space of the contralateral intact primary molar served as a control. A paired t-test was used to compare the cast measurements between initial examination and 12-month follow-up. A t-test was used to compare D + E space changes with those of the control group. The D + E space of the extraction side after 12 months was significantly smaller than that of the control side (P 0.05). The 12-month space changes in the maxillary dental arch after premature loss of a primary maxillary first molar consist mainly of distal drift of the primary canine toward the extraction site. Mesial movement of permanent molars or tilting of the primary molars did not occur. An increased arch dimension was found especially in the anterior segment (intercanine width and length). There is no need for the use of space maintainers from the results in this study in cases of premature loss of a primary first molar. © 2010 The Authors. International Journal of Paediatric Dentistry © 2010 BSPD, IAPD and Blackwell Publishing Ltd.

Structural properties and out-of-plane stability of roller bent steel arches

NARCIS (Netherlands)

Spoorenberg, R.C.

2011-01-01

In contemporary architecture the use of steel arches has seen a significant increase. They are applied in buildings and large span bridges, combining structural design with architectural merits. For arches lacking lateral support (or freestanding arches) the out-of-plane structural stability

Asymptotics of the QMLE for General ARCH(q) Models

DEFF Research Database (Denmark)

Kristensen, Dennis; Rahbek, Anders Christian

2009-01-01

-ARCH -- are derived. Strong consistency is established under the assumptions that the ARCH process is geometrically ergodic, the conditional variance function has a finite log-moment, and finite second moment of the rescaled error. Asymptotic normality of the estimator is established under the additional assumption...

Comparative analysis of the construction solution variants for flat arch coverings of buildings

Directory of Open Access Journals (Sweden)

Ibragimov Aleksandr Mayorovich

2014-03-01

Full Text Available Arch structures of long span buildings’ coverings are more beneficial in respect to material expenses, than beam and frame systems. Constructive schemes of roof frameworks of arch coverings are diverse, which means their operation under loading differs much. The authors offer a number of construction solutions for flat arch coverings of long span buildings. The comparative analysis of these construction solutions is presented. The operation of radial link arch is observed. The arch consists of discontinuous top chord and radial bowstring under the single load (uniformly distributed and concentrated in nods with different spans and rises. The problem of radial link arch optimization is solved in dependence with arising forces and rise. The optimal camber of arch was found. In further works the authors plan to analyze spans more than 36 meters and solve the problem in case of asymmetrical loadings.

Lateral testing of glued laminated timber tudor arch

Science.gov (United States)

Douglas R. Rammer; Philip Line

2016-01-01

Glued laminated timber Tudor arches have been in wide use in the United States since the 1930s, but detailed knowledge related to seismic design in modern U.S. building codes is lacking. FEMA P-695 (P-695) is a methodology to determine seismic performance factors for a seismic force resisting system. A limited P-695 study for glued laminated timber arch structures...

[Fabrication and accuracy research on 3D printing dental model based on cone beam computed tomography digital modeling].

Science.gov (United States)

Zhang, Hui-Rong; Yin, Le-Feng; Liu, Yan-Li; Yan, Li-Yi; Wang, Ning; Liu, Gang; An, Xiao-Li; Liu, Bin

2018-04-01

The aim of this study is to build a digital dental model with cone beam computed tomography (CBCT), to fabricate a virtual model via 3D printing, and to determine the accuracy of 3D printing dental model by comparing the result with a traditional dental cast. CBCT of orthodontic patients was obtained to build a digital dental model by using Mimics 10.01 and Geomagic studio software. The 3D virtual models were fabricated via fused deposition modeling technique (FDM). The 3D virtual models were compared with the traditional cast models by using a Vernier caliper. The measurements used for comparison included the width of each tooth, the length and width of the maxillary and mandibular arches, and the length of the posterior dental crest. 3D printing models had higher accuracy compared with the traditional cast models. The results of the paired t-test of all data showed that no statistically significant difference was observed between the two groups (P>0.05). Dental digital models built with CBCT realize the digital storage of patients' dental condition. The virtual dental model fabricated via 3D printing avoids traditional impression and simplifies the clinical examination process. The 3D printing dental models produced via FDM show a high degree of accuracy. Thus, these models are appropriate for clinical practice.

Discussion on construction project of lining arch reinforcing stone arch bridge%内衬拱加固石拱桥施工方案探讨

Institute of Scientific and Technical Information of China (English)

乔钧

2012-01-01

分析了石拱桥的常见病害及其原因，总结了石拱桥的加固技术，结合一个工程实例，对内衬拱加固石拱桥的有效施工方案进行了详细阐述，并证明了该加固方案的有效性。%This paper analysed the common diseases and its reasons of stone arch bridge, summed up the reinforcement technology of stone arch bridge, combining with an engineering example, elaborated in detail the effective construction scheme of lining arch reinforcing stone arch bridge, and proved the effectiveness of this reinforcement scheme.

Avaliação da inclinação dentoalveolar e dimensões do arco superior em mordidas cruzadas posteriores tratadas com aparelho expansor removível e fixo Evaluation of the dentoalveolar inclination and upper arch dimensions in posterior cross bite treated with removable and fixed expander appliances

Directory of Open Access Journals (Sweden)

Ary dos Santos-Pinto

2006-08-01

Full Text Available OBJETIVO: avaliar as diferenças produzidas nas dimensões e forma de arco pelos tratamentos com aparelho expansor fixo tipo Hyrax e aparelho expansor removível tipo Placa de Hawley com parafuso expansor palatino centralizado. MATERIAL E MÉTODOS: foram selecionados modelos de estudo iniciais e finais de 31 crianças portadoras de mordida cruzada posterior, de ambos os gêneros, de origem étnica diversa e na fase da dentadura mista, tratadas nos cursos de Graduação e Pós-Graduação em Ortodontia do Departamento de Clínica Infantil da Faculdade de Odontologia de Araraquara - UNESP. Destas crianças, 15 foram tratadas com uso do aparelho expansor fixo tipo Hyrax e as demais 16 crianças foram tratados com expansão rápida da maxila efetuada com o aparelho expansor fixo. Foram realizadas medidas das distâncias intercaninos e intermolares, da inclinação do processo alveolar e inclinação dentária nas imagens escaneadas do arco superior e do contorno do palato, obtido com auxílio de um template ajustável e do programa de análises Radiocef Studio. RESULTADOS E CONCLUSÕES: os resultados indicam uma mudança significante nas distâncias intercaninos e intermolares em ambos os grupos e uma inclinação dentária e do processo alveolar para vestibular significante no grupo tratado com o aparelho expansor fixo. A expansão conseguida pelo aparelho expansor fixo foi aproximadamente o dobro da promovida pelo aparelho expansor removível.AIM: to evaluate the differences of arch dimension and arch form obtained by treating the posterior cross-bite with the fixed expander appliance Hyrax and with the removable expander type Hawley plate with centralized screw. METHODS: initial and final study models of thirty-one children in the mixed dentition phase, of both genders and same ethnic origin treated in the Araraquara School of Dentistry, UNESP, São Paulo, Brazil - undergraduate and graduation Orthodontic courses. Fifteen children were treated

Accuracy of a new elastomeric impression material for complete-arch dental implant impressions.

Science.gov (United States)

Baig, Mirza R; Buzayan, Muaiyed M; Yunus, Norsiah

2018-05-01

The aim of the present study was to assess the accuracy of multi-unit dental implant casts obtained from two elastomeric impression materials, vinyl polyether silicone (VPES) and polyether (PE), and to test the effect of splinting of impression copings on the accuracy of implant casts. Forty direct impressions of a mandibular reference model fitted with six dental implants and multibase abutments were made using VPES and PE, and implant casts were poured (N = 20). The VPES and PE groups were split into four subgroups of five each, based on splinting type: (a) no splinting; (b) bite registration polyether; (c) bite registration addition silicone; and (d) autopolymerizing acrylic resin. The accuracy of implant-abutment replica positions was calculated on the experimental casts, in terms of interimplant distances in the x, y, and z-axes, using a coordinate measuring machine; values were compared with those measured on the reference model. Data were analyzed using non-parametrical Kruskal-Wallis and Mann-Whitney tests at α = .05. The differences between the two impression materials, VPES and PE, regardless of splinting type, were not statistically significant (P>.05). Non-splinting and splinting groups were also not significantly different for both PE and VPES (P>.05). The accuracy of VPES impression material seemed comparable with PE for multi-implant abutment-level impressions. Splinting had no effect on the accuracy of implant impressions. © 2018 John Wiley & Sons Australia, Ltd.

Optimal graft diameter and location reduce postoperative complications after total arch replacement with long elephant trunk for arch aneurysm.

Science.gov (United States)

Kondoh, Haruhiko; Funatsu, Toshihiro; Toda, Koich; Kainuma, Satoshi; Kuki, Satoru; Taniguchi, Kazuhiro

2011-08-01

Total arch replacement with an elephant trunk is a standard treatment for arch aneurysm, but serious complications, such as paraplegia and peripheral embolization caused by flapping of the elephant trunk, remain. Moreover, dilation of the descending aorta and retrograde flow into the peri-graft space at the distal elephant trunk are frequent problems. We hypothesized that optimal graft diameter and location would reduce complications after total arch replacement with a long elephant trunk by achieving complete thrombosis and minimal dilation of the descending aorta around the elephant trunk. We treated 65 patients with arch aneurysm by total arch replacement with a long elephant trunk anastomosed at the base of the innominate artery. The graft diameter was undersized (10%-20% of the distal aorta's diameter). Elephant trunk length was determined by preoperative computed tomography to locate the distal end at Th6 to Th8. Thrombosis around the elephant trunk, diameter of the descending aorta, and distance between the descending aorta and the graft near the distal end of the elephant trunk were evaluated using computed tomography. The distal end of the elephant trunk was located at Th 8 ± 1. There were no operative deaths, 3 patients (5%) died in the hospital, and 3 patients (5%) experienced spinal cord injury, including 1 in whom permanent paraplegia developed. Computed tomography revealed complete thrombosis around the elephant trunk in 58 patients (89%). The descending aorta did not dilate further, and distance between the descending aorta and the graft progressively decreased. Optimal graft diameter and location minimized postoperative complications, with complete thrombosis and no dilation of the descending aorta around the long elephant trunk in most patients. Copyright © 2011 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

NASA ARCH- A FILE ARCHIVAL SYSTEM FOR THE DEC VAX

Science.gov (United States)

Scott, P. J.

1994-01-01

The function of the NASA ARCH system is to provide a permanent storage area for files that are infrequently accessed. The NASA ARCH routines were designed to provide a simple mechanism by which users can easily store and retrieve files. The user treats NASA ARCH as the interface to a black box where files are stored. There are only five NASA ARCH user commands, even though NASA ARCH employs standard VMS directives and the VAX BACKUP utility. Special care is taken to provide the security needed to insure file integrity over a period of years. The archived files may exist in any of three storage areas: a temporary buffer, the main buffer, and a magnetic tape library. When the main buffer fills up, it is transferred to permanent magnetic tape storage and deleted from disk. Files may be restored from any of the three storage areas. A single file, multiple files, or entire directories can be stored and retrieved. archived entities hold the same name, extension, version number, and VMS file protection scheme as they had in the user's account prior to archival. NASA ARCH is capable of handling up to 7 directory levels. Wildcards are supported. User commands include TEMPCOPY, DISKCOPY, DELETE, RESTORE, and DIRECTORY. The DIRECTORY command searches a directory of savesets covering all three archival areas, listing matches according to area, date, filename, or other criteria supplied by the user. The system manager commands include 1) ARCHIVE- to transfer the main buffer to duplicate magnetic tapes, 2) REPORTto determine when the main buffer is full enough to archive, 3) INCREMENT- to back up the partially filled main buffer, and 4) FULLBACKUP- to back up the entire main buffer. On-line help files are provided for all NASA ARCH commands. NASA ARCH is written in DEC VAX DCL for interactive execution and has been implemented on a DEC VAX computer operating under VMS 4.X. This program was developed in 1985.

A theoretical method for calculating the collapse load of steel circular arches

NARCIS (Netherlands)

Spoorenberg, R.C.; Snijder, H.H.; Hoenderkamp, J.C.D.

2012-01-01

Arches are frequently used in large span structures like bridges and roofs. Although these structural elements may be prone to various instability phenomena, stocky arches or slender arches with sufficient lateral bracing fail due to plastic collapse instead of in-plane buckling or out-of-plane

CREATIVITY METHODS IN TEACHING THE ARCH-DESIGN STUDIO

Directory of Open Access Journals (Sweden)

EIGBEONAN Andrew B.

2013-07-01

Full Text Available The aim of this paper is to search and find methods of fostering creativity or ideas relating to creativity in teaching the arch-design studio. Teaching creativity through its methods will be making the students grounded in designing with creativity ideas and therefore we can have professionals that design and build with satisfaction, safety and complementary. It means we can have real buildings and places that satisfy our clients, the society and in harmony with the environment. Although there are similarities in the curricula of training architects all over the world, but educators go about it in their own convenient and suitable ways and styles. The ideas of creativity have been part of architecture from the onset, but are not deligently applied and also not formally incorporated in the curricula of training. The topic is also very relevant and timely as arch-educators and other stakeholders are of the opinion that something has to be done to improve the ways and methods of training architects, especially the teaching of the arch-design studio with regards to creativity. Through exploration of literature and interviews (physical and telephone call this paper finds methods of stimulating creativity ideas in the teaching of arch-design studio. Some of the methods of motivating creativity found in teaching the arch-design studio are: analogy, metaphors, biomimicry, brainstorming, attribute listing, mental map, TRIZ, restrictions, charrette, browsing, excursions, focus groups, other peoples viewpoints, using crazy ideas, using experts, visualizing a goal, working with dreams and images and giving students design tools such as drawings CAD and model making.

Dynamic stability analysis of circular arch subjected to follower forces with small disturbances; Judo kaju wo ukeru enkei arch no yuran ni yoru doteki kyodo to anteisei kaiseki

Energy Technology Data Exchange (ETDEWEB)

Fukuchi, N.; Okada, K. [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Hirano, Y. [Sumitomo Heavy Industries, Ltd., Tokyo (Japan)

1997-09-04

This paper describes the deformation and dynamic stability of circular arch subjected to follower forces in a submerged membrane type marine structure reinforced by arch frames. Governing equations for finite deformations of the circular arch subjected to follower forces are introduced using an embedded curve coordinate, which are formulated by applying Galerkin method. In addition, equations of motion due to small disturbances under given condition of loading are introduced. Based on these equations, dynamic stability of the arch is analyzed by means of Runnge-Kutta-Gill method, to clarify the relationship between disturbances and instability regions and the resulting phenomena. Near the boundary regions of stability, both amplitude and cycle of deformation are greatly affected by the amplitude of disturbances. The dynamic instability is governed by the inverse symmetry primary mode with minimum characteristic frequency which is specific for the circular arch. The dynamic stability has high parameter dependency, and the instability regions have a complicated shapes. Although flattened arch has a smaller static critical load, it provides the dynamic stability against the disturbance. 5 refs., 10 figs.

Strengthening Masonry Arches with Lime-Based Mortar Composite

Directory of Open Access Journals (Sweden)

Valerio Alecci

2017-06-01

Full Text Available In recent decades, many strengthening interventions on masonry elements were performed by using fiber reinforced polymers (FRPs. These advanced materials proved to be effective to increase the load-carrying capacity of masonry elements and to improve their structural behavior, avoiding the most critical failure modes. Despite the advantages of this technique compared to more traditional methods, FRP systems have disadvantages related to their low resistance to high temperatures, impossibility of application on wet surfaces, low permeability, and poor compatibility with masonry supports. Therefore, composite materials made of a fiber textile embedded in an inorganic matrix were recently proposed as alternatives to FRPs for strengthening historic masonry constructions. These composite materials are easier to install, have higher resistance to high temperatures, and permit higher vapor permeability than FRPs. The inorganic matrix is frequently a cement-based mortar, and the composite materials made of a fiber textile embedded in a cement-based mortar are usually identified as FRCM (fabric reinforced cementitious matrix composites. More recently, the use of natural lime mortar as an inorganic matrix has been proposed as an alternative to cement-based mortars when historic compatibility with the substrate is strictly required, as in case of restoration of historic buildings. In this paper, the effectiveness of a fabric made of basalt fibers embedded in lime mortar matrix (Basalt-FRLM for the strengthening of masonry arches is investigated. An experimental investigation was performed on 1:2 scaled brick masonry arches strengthened at the extrados with a layer of Basalt-FRLM and tested under vertical load. The results obtained are compared with previous results obtained by the authors by testing masonry arches strengthened at their extrados with FRCM and FRP composites. This investigation highlights the effectiveness of Basalt-FRLM in increasing load

Reliability and Correlation of Static and Dynamic Foot Arch Measurement in a Healthy Pediatric Population.

Science.gov (United States)

Scholz, Timo; Zech, Astrid; Wegscheider, Karl; Lezius, Susanne; Braumann, Klaus-Michael; Sehner, Susanne; Hollander, Karsten

2017-09-01

Measurement of the medial longitudinal foot arch in children is a controversial topic, as there are many different methods without a definite standard procedure. The purpose of this study was to 1) investigate intraday and interrater reliability regarding dynamic arch index and static arch height, 2) explore the correlation between both arch indices, and 3) examine the variation of the medial longitudinal arch at two different times of the day. Eighty-six children (mean ± SD age, 8.9 ± 1.9 years) participated in the study. Dynamic footprint data were captured with a pedobarographic platform. For static arch measurements, a specially constructed caliper was used to assess heel-to-toe length and dorsum height. A mixed model was established to determine reliability and variation. Reliability was found to be excellent for the static arch height index in sitting (intraday, 0.90; interrater, 0.80) and standing positions (0.88 and 0.85) and for the dynamic arch index (both 1.00). There was poor correlation between static and dynamic assessment of the medial longitudinal arch (standing dynamic arch index, r = -0.138; sitting dynamic arch index, r = -0.070). Static measurements were found to be significantly influenced by the time of day (P body mass index (P mind. For clinical purposes, static and dynamic arch data should be interpreted separately.

Accuracy and efficiency of full-arch digitalization and 3D printing: A comparison between desktop model scanners, an intraoral scanner, a CBCT model scan, and stereolithographic 3D printing.

Science.gov (United States)

Wesemann, Christian; Muallah, Jonas; Mah, James; Bumann, Axel

2017-01-01

The primary objective of this study was to compare the accuracy and time efficiency of an indirect and direct digitalization workflow with that of a three-dimensional (3D) printer in order to identify the most suitable method for orthodontic use. A master model was measured with a coordinate measuring instrument. The distances measured were the intercanine width, the intermolar width, and the dental arch length. Sixty-four scans were taken with each of the desktop scanners R900 and R700 (3Shape), the intraoral scanner TRIOS Color Pod (3Shape), and the Promax 3D Mid cone beam computed tomography (CBCT) unit (Planmeca). All scans were measured with measuring software. One scan was selected and printed 37 times on the D35 stereolithographic 3D printer (Innovation MediTech). The printed models were measured again using the coordinate measuring instrument. The most accurate results were obtained by the R900. The R700 and the TRIOS intraoral scanner showed comparable results. CBCT-3D-rendering with the Promax 3D Mid CBCT unit revealed significantly higher accuracy with regard to dental casts than dental impressions. 3D printing offered a significantly higher level of deviation than digitalization with desktop scanners or an intraoral scanner. The chairside time required for digital impressions was 27% longer than for conventional impressions. Conventional impressions, model casting, and optional digitization with desktop scanners remains the recommended workflow process. For orthodontic demands, intraoral scanners are a useful alternative for full-arch scans. For prosthodontic use, the scanning scope should be less than one quadrant and three additional teeth.

Complex branchial fistula: a variant arch anomaly.

Science.gov (United States)

De Caluwé, D; Hayes, R; McDermott, M; Corbally, M T

2001-07-01

A 5-year-old boy presented with an infected left-sided branchial fistula. Despite antibiotic treatment and repeated excision of the fistula, purulent discharge from the wound persisted. Three-dimensional computed tomography (3D CT) reconstruction greatly facilitated the diagnosis and management of this case by showing the course of the fistulous tract. The complexity of the tract suggests that this represents a variant arch anomaly because it contains features of first, second, third, and fourth arch remnants. Copyright 2001 by W.B. Saunders Company.

FEATURES OF DESIGN OF TIED-ARCH BRIDGES WITH FLEXIBLE INCLINED SUSPENSION HANGERS

Directory of Open Access Journals (Sweden)

V. O. Samosvat

2017-10-01

Full Text Available Purpose. Investigation and analysis of the hanger arrangement and the structural stability of a Network arch bridge – a tied-arch bridge with inclined hangers that cross each other at least twice. It is also necessary to make a comparative analysis with other types of hanger arrangements. Methodology. The authors in their research investigated a large number of parameters to determine their influence in the force distribution in the arch. Eventually they determined optimal values for all parameters. These optimal values allowed developing a design guide that leads to optimal arch design. When solving this problem, the authors used three-dimensional finite element models and the objective was to determine the most suitable solution for a road bridge, with a span of 100 meters, consisting of two inclined steel arches, located on a road with two traffic lanes, subjected to medium traffic. The virtual prototype of the model is performed by finite element simulator Midas Civil. Findings. In this study, for the bridge deck, a concrete tie appears to be the best solution considering the structural behavior of network arches, but economic advantages caused by easier erection may lead to steel or a composite bridge deck as better alternatives. Design requirements and local conditions of each particular bridge project will decide the most economic deck design.Originality. To ensure passenger comfort and the stability and continuity of the track, deformations of bridges are constricted. A network arch is a stiff structure with small deflections and therefore suitable to comply with such demands even for high speed railway traffic.
A network arch bridge with a concrete tie usually saves more than half the steel required for tied arches with vertical hangers and concrete ties. Practical value. Following the study design advice given in this article leads to savings of about 60 % of structural steel compared with conventional tied arch bridges with

Preliminary Study of In Vivo Formed Dental Plaque Using Confocal Microscopy and Scanning Electron Microscopy

Directory of Open Access Journals (Sweden)

KA. Al-Salihi

2009-12-01

Full Text Available Objective: Confocal laser scanning microscopy (CLSM is relatively a new light microscopical imaging technique with a wide range of applications in biological sciences. The primary value of CLSM for the biologist is its ability to provide optical sections from athree-dimensional specimen. The present study was designed to assess the thickness and content of in vivo accumulated dental plaque using CLSM and scanning electron microscopy (SEM.Materials and Methods: Acroflat lower arch splints (acrylic appliance were worn by five participants for three days without any disturbance. The formed plaques were assessed using CLSM combined with vital fluorescence technique and SEM.Results: In this study accumulated dental plaque revealed varied plaque microflora vitality and thickness according to participant’s oral hygiene. The thickness of plaque smears ranged from 40.32 to 140.72 μm and 65.00 to 128.88 μm for live (vital and dead accumulated microorganisms, respectively. Meanwhile, the thickness of plaque on the appliance ranged from 101 μm to 653 μm. CLSM revealed both dead and vital bacteria on the surface of the dental plaque. In addition, SEM revealed layers of various bacterial aggregations in all dental plaques.Conclusion: This study offers a potent non-invasive tool to evaluate and assess the dental plaque biofilm, which is a very important factor in the development of dental caries.

Tracheal Compression Caused by a Mediastinal Hematoma After Interrupted Aortic Arch Surgery.

Science.gov (United States)

Hua, Qingwang; Lin, Zhiyong; Hu, Xingti; Zhao, Qifeng

2017-08-03

Congenital abnormalities of the aortic arch include interrupted aortic arch (IAA), coarctation of the aorta (CoA), and double aortic arch (DAA). Aortic arch repair is difficult and postoperative complications are common. However, postoperative tracheobronchial stenosis with respiratory insufficiency is an uncommon complication and is usually caused by increased aortic anastomotic tension. We report here a case of tracheal compression by a mediastinal hematoma following IAA surgery. The patient underwent a repeat operation to remove the hematoma and was successfully weaned off the ventilator.In cases of tracheobronchial stenosis after aortic arch surgery, airway compression by increased aortic anastomotic tension is usually the first diagnosis considered by clinicians. Other causes, such as mediastinal hematomas, are often ignored. However, the severity of symptoms with mediastinal hematomas makes this an important entity.

Pressure distribution in centrifugal dental casting.

Science.gov (United States)

Nielsen, J P

1978-02-01

Equations are developed for liquid metal pressure in centrifugal dental casting, given the instantaneous rotational velocity, density, and certain dimensions of the casting machine and casting pattern. A "reference parabola" is introduced making the fluid pressure concept more understandable. A specially designed specimen demonstrates experimentally the reference parabola at freezing.

Recurrent neck infection with branchial arch fistula in children.

Science.gov (United States)

Madana, J; Yolmo, Deeke; Kalaiarasi, R; Gopalakrishnan, S; Saxena, S K; Krishnapriya, S

2011-09-01

Acute suppurative neck infections associated with third or fourth branchial arch fistulas are frequently recurrent. Third and fourth branchial arch anomalies are much less common than those of second arch and usually present with left thyroid lobe inflammation. The authors present their experience with 15 cases of pyriform sinus fistulae (PSF) of third branchial arch origin and 3 cases of fourth arch origin, all of which presented as recurrent neck infection mainly on the left side. A retrospective review of 18 cases of third and fourth arch fistulae treated at JIPMER from 2005 to 2010. This study includes 18 patients with PSF diagnosed by the existence of fistulous tract radiologically and intraoperatively with pathological correlation. Neck exploration with excision of tract and left hemithyroidectomy was performed in all cases. The patients consisted of 7 males and 11 females, and the ages ranged from 3 to 15 years. All of them presented with recurrent episodes of neck infection. Investigations performed include computed tomography (CT) fistulography, barium swallow and ultrasound which were useful in delineating pyriform sinus fistulous tract preoperatively. All cases were on the left side and the fistula was identified by barium swallow in 14 cases (80%), while intraoperative and pathologic confirmation of the tract was possible in all cases (100%). Neck exploration with an emphasis on complete exposure of the recurrent laryngeal nerve and exposure of the pyriform sinus opening to facilitate complete fistulous tract excision with left hemithyroidectomy was successful in all patients. A follow up period of 1-3 years showed no recurrence. Recurrent neck infection in a child should alert the physician to the possibility of an underlying pyriform sinus fistula of branchial origin and CT fistulography should be performed after the resolution of the neck infection to delineate the tract anatomically. Crown Copyright © 2011. Published by Elsevier Ireland Ltd. All

Initial arch wires for tooth alignment during orthodontic treatment with fixed appliances.

Science.gov (United States)

Jian, Fan; Lai, Wenli; Furness, Susan; McIntyre, Grant T; Millett, Declan T; Hickman, Joy; Wang, Yan

2013-04-30

Initial arch wires are the first arch wires to be inserted into the fixed appliance at the beginning of orthodontic treatment and are used mainly for the alignment of teeth by correcting crowding and rotations. With a number of different types of orthodontic arch wires available for initial tooth alignment, it is important to understand which wire is most efficient, as well as which wires cause the least amount of root resorption and pain during the initial aligning stage of treatment. This is an update of the review 'Initial arch wires for alignment of crooked teeth with fixed orthodontic braces' first published in the Cochrane Database of Systematic Reviews 2010, Issue 4. To assess the effects of initial arch wires for alignment of teeth with fixed orthodontic braces in relation to alignment speed, root resorption and pain intensity. We searched the following electronic databases: the Cochrane Oral Health Group's Trials Register (to 2 August 2012), CENTRAL (The Cochrane Library 2012, Issue 7), MEDLINE via OVID (1950 to 2 August 2012) and EMBASE via OVID (1980 to 2 August 2012). We also searched the reference lists of relevant articles. There was no restriction with regard to publication status or language of publication. We contacted all authors of included studies to identify additional studies. We included randomised controlled trials (RCTs) of initial arch wires to align teeth with fixed orthodontic braces. Only studies involving participants with upper and/or lower full arch fixed orthodontic appliances were included. Two review authors were responsible for study selection, validity assessment and data extraction. All disagreements were resolved by discussion amongst the review team. Corresponding authors of included studies were contacted to obtain missing information. Nine RCTs with 571 participants were included in this review. All trials were at high risk of bias and a number of methodological limitations were identified. All trials had at least one

Mesiodistal Crown Dimensions of Permanent Teeth in Bangladeshi Population

Directory of Open Access Journals (Sweden)

Saeed Hossain Khan

2011-09-01

Full Text Available Background: Variation in tooth size is influenced by genetic and environmental factors. Several studies have reported tooth size variation between and within different racial groups. In order to improve the quality of dental care available, there is a great need for data on the mesiodistal crown dimensions of the individual teeth of Bangladeshi population. Objectives: To find nominative data on the mesiodistal crown dimensions of permanent teeth in Bangladeshi population and to compare the findings with those reported in other populations. Methods: This observational study was done from January, 2008 to June, 2010 in the Department of Orthodontics, Faculty of Dentistry, Bangabandhu Sheikh Mujib Medical University. A total of 244 Bangladeshi subjects (77 males and 167 females, aged 7 – 36 years (mean 18.3 years with no age limit who attended at the above mentioned place for treatment were included in the study. Main outcome measure was mesiodistal crown dimension of each tooth class of permanent dentition. Mesiodistal crown dimensions were measured from dental casts of the permanent teeth. Results: Males had significantly larger teeth than females for maxillary central incisors (p < 0.05 and for the mandibular second premolars (p < 0.001. In both sexes, the maxillary lateral incisors showed the greatest variability [coefficient of variation (CV 10.7%] and the maxillary canines the least (CV 6.9% in mesiodistal crown dimension. Mandibular canines displayed greater sexual dimorphism in mesiodistal crown size than in any other tooth classes. Comparisons of the mesiodistal crown dimensions between population groups showed that Bangladeshis have tooth sizes close to those of North Indians, Icelanders and Jordanians but larger than those of North American Whites. Conclusions: From this study, a standard for the mesiodistal crown dimensions of permanent dentition of Bangladeshi males and females are obtained. Key Words: Crown dimension; Mesio

Optical silencing of C. elegans cells with arch proton pump.

Directory of Open Access Journals (Sweden)

Ayako Okazaki

Full Text Available BACKGROUND: Optogenetic techniques using light-driven ion channels or ion pumps for controlling excitable cells have greatly facilitated the investigation of nervous systems in vivo. A model organism, C. elegans, with its small transparent body and well-characterized neural circuits, is especially suitable for optogenetic analyses. METHODOLOGY/PRINCIPAL FINDINGS: We describe the application of archaerhodopsin-3 (Arch, a recently reported optical neuronal silencer, to C. elegans. Arch::GFP expressed either in all neurons or body wall muscles of the entire body by means of transgenes were localized, at least partially, to the cell membrane without adverse effects, and caused locomotory paralysis of worms when illuminated by green light (550 nm. Pan-neuronal expression of Arch endowed worms with quick and sustained responsiveness to such light. Worms reliably responded to repeated periods of illumination and non-illumination, and remained paralyzed under continuous illumination for 30 seconds. Worms expressing Arch in different subsets of motor neurons exhibited distinct defects in the locomotory behavior under green light: selective silencing of A-type motor neurons affected backward movement while silencing of B-type motor neurons affected forward movement more severely. Our experiments using a heat-shock-mediated induction system also indicate that Arch becomes fully functional only 12 hours after induction and remains functional for more than 24 hour. CONCLUSIONS/SGNIFICANCE: Arch can be used for silencing neurons and muscles, and may be a useful alternative to currently widely used halorhodopsin (NpHR in optogenetic studies of C. elegans.

Hybrid treatment of aortic arch disease

Science.gov (United States)

Metzger, Patrick Bastos; Rossi, Fabio Henrique; Moreira, Samuel Martins; Issa, Mario; Izukawa, Nilo Mitsuru; Dinkhuysen, Jarbas J.; Spina Neto, Domingos; Kambara, Antônio Massamitsu

2014-01-01

Introduction The management of thoracic aortic disease involving the ascending aorta, aortic arch and descending thoracic aorta are technically challenging and is an area in constant development and innovation. Objective To analyze early and midterm results of hybrid treatment of arch aortic disease. Methods Retrospective study of procedures performed from January 2010 to December 2012. The end points were the technical success, therapeutic success, morbidity and mortality, neurologic outcomes, the rate of endoleaks and reinterventions. Results A total of 95 patients treated for thoracic aortic diseases in this period, 18 underwent hybrid treatment and entered in this study. The average ages were 62.3 years. The male was present in 66.7%. The technical and therapeutic success was 94.5% e 83.3%. The perioperative mortality rate of 11.1%. There is any death during one-year follow- up. The reoperation rates were 16.6% due 2 cases of endoleak Ia and one case of endoleak II. There is any occlusion of anatomic or extra anatomic bypass during follow up. Conclusion In our study, the hybrid treatment of aortic arch disease proved to be a feasible alternative of conventional surgery. The therapeutic success rates and re- interventions obtained demonstrate the necessity of thorough clinical follow-up of these patients in a long time. PMID:25714205

Structural behaviour of masonry arch with no-horizontal springing settlement

Directory of Open Access Journals (Sweden)

P. Zampieri

2018-01-01

Full Text Available This paper presents a calculation procedure for assessing the structural integrity of a masonry arch with non-horizontal springing settlement. By applying the Principle of Virtual Work (PVW to the deformed arch system, the procedure proposed herein details the reaction forces and thrust lines for each step of imposed settlement of the support. The procedure can also be used estimate the final displacement that causes complete failure of arch structural capacity. The results of the analysis procedure were compared against those obtained by experimental testing so as to validate the proposed calculation method

Technical improvement of arch setting machine for roadway drive. Kusshin kirihayo sewakuki no hensen

Energy Technology Data Exchange (ETDEWEB)

Fujino, T [Taiheiyo Coal Mining Co. Ltd., Tokyo (Japan)

1991-09-25

The following contents are described for a new type arch setting machine introduced to the Taiheiyo Coal Mining Co. (1) The excavation of drift in this coal mine is carried out by the excavating system combining the excavating machine (CM) and the transporter (SC) and the supporting method where arch type steel beams are used as the supporting material is used. (2) In order to automatize the arch setting work, this machine which combined the both functions of the arch lifter (developed in 1983) and the arch setting manipulator (ASM, developed in 1990). (3) This machine has the total weight of 1,500kg, is mounted on CM, and consists of the running part, the arm part, the boom part, and the end saucer part of steel arches. Further, simple fitting or removing can be made and the coal falling down is prevented by holding the coal wall during the arch setting work. (4) When this machine and the ASM were compared for the arch setting time in the working site, the former required about the half time period of the latter. 5 figs., 1 tab.

Ductal Stent Implantation in Tetralogy of Fallot with Aortic Arch Abnormality

Science.gov (United States)

Ergul, Yakup; Saygi, Murat; Ozyilmaz, Isa; Guzeltas, Alper; Odemis, Ender

2015-01-01

Stenting of patent ductus arteriosus is an alternative to palliative cardiac surgery in newborns with duct-dependent or decreased pulmonary circulation; however, the use of this technique in patients with an aortic arch abnormality presents a challenge. Tetralogy of Fallot is a congenital heart defect that is frequently associated with anomalies of the aortic arch and its branches. The association is even more common in patients with chromosome 22q11 deletion. We present the case of an 18-day-old male infant who had cyanosis and a heart murmur. After an initial echocardiographic evaluation, the patient was diagnosed with tetralogy of Fallot and right-sided aortic arch. The pulmonary annulus and the main pulmonary artery and its branches were slightly hypoplastic; the ductus arteriosus was small. Conventional and computed tomographic angiograms revealed a double aortic arch and an aberrant left subclavian artery. The right aortic arch branched into the subclavian arteries and continued into the descending aorta, whereas the left aortic arch branched into the common carotid arteries and ended with the patent ductus arteriosus. After evaluation of the ductal anatomy, we implanted a 3.5 × 15-mm coronary stent in the duct. Follow-up injections showed augmented pulmonary flow and an increase in oxygen saturation from 65% to 94%. The patient was also found to have chromosome 22q11 deletion. PMID:26175649

Full-scale load tests of Pearl-Chain arches

DEFF Research Database (Denmark)

Halding, Philip Skov; Hertz, Kristian Dahl; Schmidt, Jacob Wittrup

2017-01-01

-Decks: First an investigation of the system’s elastic response (maximum load of 648kN), and second a demonstration of its collapse mechanism and ultimate capacity (maximum load of 970kN). The full-scale test showed formation of plastic hinges and clear warning signs are observed at 84% of the failure load......A full-scale load test is made of two Pearl-Chain (PC) concrete arches in order to evaluate the structural response and assess the design safety. Pearl-Chain structures and Pearl-Chain arches are invented and patented at the Technical University of Denmark. PC-Arches consist of specially designed....... The ultimate, experimental load capacity is 14% higher than the calculated mainly due to the assumed static system used for the calculation. In addition to the full-scale test bridge the first ever permanent PC-Bridge is erected in Denmark in 2015....

In-Plane MEMS Shallow Arch Beam for Mechanical Memory

KAUST Repository

Hafiz, Md Abdullah Al; Kosuru, Lakshmoji; Ramini, Abdallah; Chappanda, Karumbaiah N.; Younis, Mohammad I.

2016-01-01

We demonstrate a memory device based on the nonlinear dynamics of an in-plane microelectromechanical systems (MEMS) clamped–clamped beam resonator, which is deliberately fabricated as a shallow arch. The arch beam is made of silicon, and is electrostatically actuated. The concept relies on the inherent quadratic nonlinearity originating from the arch curvature, which results in a softening behavior that creates hysteresis and co-existing states of motion. Since it is independent of the electrostatic force, this nonlinearity gives more flexibility in the operating conditions and allows for lower actuation voltages. Experimental results are generated through electrical characterization setup. Results are shown demonstrating the switching between the two vibrational states with the change of the direct current (DC) bias voltage, thereby proving the memory concept.

In-Plane MEMS Shallow Arch Beam for Mechanical Memory

KAUST Repository

Hafiz, Md Abdullah Al

2016-10-18

We demonstrate a memory device based on the nonlinear dynamics of an in-plane microelectromechanical systems (MEMS) clamped–clamped beam resonator, which is deliberately fabricated as a shallow arch. The arch beam is made of silicon, and is electrostatically actuated. The concept relies on the inherent quadratic nonlinearity originating from the arch curvature, which results in a softening behavior that creates hysteresis and co-existing states of motion. Since it is independent of the electrostatic force, this nonlinearity gives more flexibility in the operating conditions and allows for lower actuation voltages. Experimental results are generated through electrical characterization setup. Results are shown demonstrating the switching between the two vibrational states with the change of the direct current (DC) bias voltage, thereby proving the memory concept.

Regional cerebral perfusion for surgical correction of neonatal aortic arch obstruction.

Science.gov (United States)

Zhang, Hui; Cheng, Pei; Hou, Jia; Li, Lei; Liu, Hu; Liu, Ruifang; Ji, Bingyang; Luo, Yi

2009-05-01

One-stage repair of aortic arch obstruction and associated cardiac anomalies is a surgical challenge in infants.The purpose of the present study is to review the current outcome using regional cerebral perfusion (RCP) during a procedure correcting interrupted aortic arch (IAA) and also isolated aortic coarctation (CoA) and CoA combined with hypoplastic aortic arch (CoA-HyAA) in our center. Between January 2007 and July 2008, 24 infant patients with interrupted aortic arch (IAA) (n=3), isolated aortic coarctation (iCoA) (n=9) and aortic coarctation with hypoplastic aortic arch (CoA-HyAA) (n=12) underwent one-stage surgical correction in our hospital. End-to-end anastomosis was employed in 12 infants (IAA n=3 and iCoA n=9); for the other 12 patients with CoA-HyAA, an end-to-end extended anastomosis was used in 8 cases, end-to-side anastomosis in 2 cases, and composite heterologous pericardial patch in 2 cases. RCP with 40 mL/kg/min through the innominate artery during aortic arch reconstruction was employed for all pediatric patients. One single-dose histidine-ketoglutarate-tryptophan (HTK) solution was used for myocardial protection during CPB. Cardiopulmonary bypass time and aortic cross-clamp time were 165.6+/-32.4 min and 81.7+/-30.0 min, respectively. The mean regional cerebral perfusion time was 31.0+/-10.6 min; lowest nasopharyngeal temperature was 19.1+/-1.1 degrees C. Operative mortality rate in both groups was 8.3%. Mean follow-up was 10.5+/-4.8 months. There was no late mortality or postoperative neurologic, renal or hepatic complications. All patients are asymptomatic and are developing normally. One-stage total arch repair using the RCP technique is an excellent method that may minimize neurologic and renal complications. Our surgical strategy for arch anomaly has a low rate of residual and recurrent coarctation when performed in these infants.

Assessment of the influence of jogging on the shape of female foot arches.

Science.gov (United States)

Maslon, Agata; Golec, Joanna; Szczygiel, Elzbieta; Czechowska, Dorota; Golec, Boguslaw

2017-12-23

Both walking and its faster, running, consist of cyclical subsequent phases of swing and support; however, they differ in their time proportions as well as magnitude of acting forces. There is a lack of studies concerning the long-term consequences of repeated jogging cycles on the function of feet and, above all, on their permanent impact on the shape of foot arches. The objective of this study was to answer the question whether regular jogging changes the shape of the transverse and medial longitudinal arches of the feet. The research material consisted of 96 women with an average age of 26.57, and included 50 actively jogging women, and 46 of non-joggers. The study was performed with the use of EMED-SF force platform. The plantar surface of the foot was divided into 10 regions according to Cavanagh, for which peak pressure and contact time were established. Two indicators were defined: metatarsal bone pressure distribution pattern acc. to Kantali, and longitudinal arch index acc. to Cavanagh. The data obtained revealed more frequent occurrence of the greatest pressure under the centrally located metatarsal heads (lack of functional foot transverse arch) among the female joggers, compared with the non-joggers. Moreover, the findings indicate the higher frequency of medial longitudinal foot arch flattening among female runners, with a great deal of consistency between both feet, whereas results for the control group show asymmetrical medial arch shapes with right foot propensity to normal arch shape and left foot tendency for excessive arch. The observed differences in feet arch shapes between female joggers and non-joggers indicate the influence of jogging on feet functional adaptations.

Highly tunable NEMS shallow arches

KAUST Repository

Kazmi, Syed N. R.; Hajjaj, Amal Z.; Da Costa, Pedro M. F. J.; Younis, Mohammad I.

2017-01-01

and surface nanomachining of a highly conductive device layer on a silicon-on-insulator wafer. By designing the structures to have gap to thickness ratio of more than four, the mid-plane stretching of the nano arches is maximized such that an increase

Electrostatically Tunable Nanomechanical Shallow Arches

KAUST Repository

Kazmi, Syed N. R.; Hajjaj, Amal Z.; Da Costa, Pedro M. F. J.; Younis, Mohammad I.

2017-01-01

-beam lithography and surface nanomachining of a highly conductive device layer on a silicon-on-insulator (SOI) wafer. The experimental results show good agreement with the analytical results with a maximum tunability of 108.14% for 180 nm thick arch with a

Selective cerebro-myocardial perfusion in complex congenital aortic arch pathology: a novel technique.

Science.gov (United States)

De Rita, Fabrizio; Lucchese, Gianluca; Barozzi, Luca; Menon, Tiziano; Faggian, Giuseppe; Mazzucco, Alessandro; Luciani, Giovanni Battista

2011-11-01

Simultaneous cerebro-myocardial perfusion has been described in neonatal and infant arch surgery, suggesting a reduction in cardiac morbidity. Here reported is a novel technique for selective cerebral perfusion combined with controlled and independent myocardial perfusion during surgery for complex or recurrent aortic arch lesions. From April 2008 to April 2011, 10 patients with arch pathology underwent surgery (two hypoplastic left heart syndrome [HLHS], four recurrent arch obstruction, two aortic arch hypoplasia + ventricular septal defect [VSD], one single ventricle + transposition of the great arteries + arch hypoplasia, one interrupted aortic arch type B + VSD). Median age was 63 days (6 days-36 years) and median weight 4.0 kg (1.6-52). Via midline sternotomy, an arterial cannula (6 or 8 Fr for infants) was directly inserted into the innominate artery or through a polytetrafluoroethylene (PTFE) graft (for neonates cerebro-myocardial perfusion was 39 ± 18 min (17-69). Weaning from cardiopulmonary bypass was achieved without inotropic support in three and with low dose in seven patients. One patient required veno-arterial extracorporeal membrane oxygenation. Four patients, body weight cerebro-myocardial perfusion is feasible in patients with complex or recurrent aortic arch disease, starting from premature newborn less than 2.0 kg of body weight to adults. The technique is as safe as previously reported methods of cerebro-myocardial perfusion and possibly more versatile. © 2011, Copyright the Authors. Artificial Organs © 2011, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

Reduction of Zygomatic Arch Isolated Fracture Using Ultra Sound and Needle Marking.

Science.gov (United States)

Kim, Jun Sik; Park, Young Ji; Lee, Yoon Jung; Kim, Nam Gyun; Lee, Kyung Suk

2016-12-01

Zygomatic arch is a bony arch constituting the lateral midface, which consists of 25% of all midface fractures. There are a number of ways to evaluate the extent of zygomatic arch fracture. Some authors have reported successful treatment outcomes using ultrasound (U/S). To add to the previous methods, we have considered ways to accurately display the location of the fracture line while using U/S with 23 gauge needle marking. We introduce our method, which provided satisfactory results for reduction using a portable U/S, and it can evaluate the fracture line simultaneously when reduction of an isolated zygomatic arch fracture is necessary, and needle marking, which can easily point out the fracture line on U/S. We studied 21 patients with an isolated zygomatic arch fracture who underwent closed reduction using U/S and needle marking between 2013 and 2015. We achieved satisfactory results in all our cases with respect to reduction by using the Dingman elevator after performing a temporal approach incision, while confirming relative positioning between needle marking and zygomatic fracture at the same time, after insertion of a 23 gauge needle in the skin above the zygomatic arch fracture line parallel to it. We treated 21 patients with an isolated zygomatic arch fracture using U/S and the needle marking method, which provided satisfactory results because the extent of reduction of the fracture could be evaluated in real-time during the operation and exposure to radiation was reduced.

Effects of pelvic rotation and needle angle on pubic arch interference during transperineal prostate implants

International Nuclear Information System (INIS)

Tincher, Sandra A.; Kim, Robert Y.; Ezekiel, Mark P.; Zinsli, Tom; Fiveash, John B.; Raben, David A.; Bueschen, Anton J.; Urban, Donald A.

2000-01-01

Purpose: Pubic arch interference due to an enlarged prostate gland or a narrow pubic arch is often a limiting factor in adequate prostate coverage during transperineal brachytherapy. The purpose of this study was to evaluate the effects of both pelvic rotation and needle angles on pubic arch interference using CT-based 3-D information. Methods and Materials: Seven patients had CT imaging in both supine and lithotomy positions and 3-D treatment planning was performed with three needle angles (20 downward, 0, 20 upward). The pubic arch interference was then measured and comparisons were made for each needle trajectory and pelvic position. Results: Increasing pelvic rotation from supine to lithotomy position shows less pubic arch interference. Directing the needle tip upward shows less pubic arch interference in both supine and lithotomy positions when compared to needle tips directed downward. Conclusions: Both pelvic position and needle angles are important factors influencing pubic arch interference. Preplanning CT-based 3-D information may assist for individualized treatment planning in patients with a significant bony interference, thus avoiding pubic arch interference during implantation

The application of data measurement before the pedicle vertebral arch fixed operation with spiral CT

International Nuclear Information System (INIS)

Yang Zenian; Luo Zhongyao; Chen Yong'an

2003-01-01

Objective: Authors carry out volume scans and 3D surface reconstruction. Then authors get the precise data of pedicle of vertebral arch, entering nail angle on horizontal direction, entering nail screw length, and the smallest horizontal diameter and entering nails' distance on pedicle of vertebral arch before the pedicle vertebral arch fixed operation. Method: Select the axial image of the widest pedicle of vertebral arch and it SSD image, measure the entering nail distance on the pedicle of vertebral arch, TSA, entering nail screw length, and the smallest horizontal diameter of the pedicle of vertebral arch. Result: The method helps to prepare the length, size and location of the nail and TSA for the pedicle of vertebral arch fixed operation, increase the operation success rate. Conclusion: This is a simple and reliable method to prepare the precise data of the nail length and size, TSA for the operation

Multi-detector row computed tomographic evaluation of a rare type of complete vascular ring: Double aortic arch with atretic left arch distal to the origin of left subclavian artery

Energy Technology Data Exchange (ETDEWEB)

Hung, Ying Ying; Fu, Ching Yun; Wei, Hao Ji; Tsai, I Chen; Chen, Clayton Chi Chang [Taichung Veterans General Hospital, Taichung (China)

2013-10-15

Double aortic arch with an atretic left arch distal to the origin of left subclavian artery was diagnosed with multi-detector row computed tomography (MDCT) in two children with dysphagia. This rare type of complete vascular ring is clinically important because it may be confused with right aortic arch in mirror imaging. Anatomic details of this rare type of complete vascular ring demonstrated on MDCT facilitated appropriate surgical treatment.

The distribution of cervical vertebrae anomalies among dental malocclusions

Directory of Open Access Journals (Sweden)

Hasan Kamak

2015-01-01

Full Text Available Aims: The aims of our study were to investigate the distribution of cervical vertebrae anomalies (CVAs among dental Angle Class I, II, and III malocclusions in Turkish population and whether a correlation between CVA and dental malocclusion. Materials and Methods: The study was performed on lateral cephalometric radiographs which were taken at the Department of Orthodontics, Faculty of Dentistry, Kirikkale University. The final sample of 318 orthodontic patients was included in the study. Dental malocclusions were performed according to Angle classification. CVAs were categorized: (1 fusion and (2 posterior arch deficiency (PAD. The Chi-square test was used to the analysis of the potential differences among dental malocclusions. Results: The final sample of 318 patients was examined. CVA was observed in 42 individuals (of 26 [8.17%] had fusion and 16 [5.03%] had PAD, with a frequency of 13.2%. Of the 26 fusion defect, 8 (30.7% had Angle Class I, 8 (30.7% had Angle Class II, and 10 (38.4% had Angle Class III malocclusion. Of the 16 PAD, 8 (50% had Angle Class I, 8 (50% had Angle Class II but no patients with Angle Class III malocclusion was observed. The distribution of dental malocclusions regarding CVA was not statistically significant (P = 0.076. Of these 42 individuals with CVA, 52.3% (15 fusions and 7 PAD were females and 47.7% (11 fusions and 9 PAD were males. Conclusion: In our study, the prevalence of fusion and PAD were found 8.1% and 5.0% in Turkish population, respectively. Besides, no statistically significant correlation between CVA and Angle Class I, II, and III malocclusions were found. Our findings support the studies showing no gender dimorphism.

Occlusion and Temporomandibular Function among Subjects with Mandibular Distal Extension Removable Partial Dentures.

NARCIS (Netherlands)

Creugers, N.H.J.; Witter, D.J.; Spijker, A. van 't; Gerritsen, A.E.; Kreulen, C.M.

2010-01-01

Objective. To quantify effects on occlusion and temporomandibular function of mandibular distal extension removable partial dentures in shortened dental arches. Methods. Subjects wearing mandibular extension removable partial dentures (n = 25) were compared with subjects with shortened dental arches

The surgical importance of an axillary arch in sentinel node biopsy.

LENUS (Irish Health Repository)

Ridgway, P F

2011-03-01

When Carl Langer described the aberrant axillary arch in 1846 its relevance in sentinel node biopsy (SNB) surgery could not have been contemplated. The authors define an incidence and elucidate relevance of the arch in SNB of the axilla.

Metallic artifacts caused by dental metal prostheses on PET images. A PET/CT phantom study using different PET/CT scanners

International Nuclear Information System (INIS)

Shimamoto, Hiroaki; Kakimoto, Naoya; Murakami, Shumei; Furukawa, Souhei; Fujino, Kouichi; Hamada, Seiki; Shimosegawa, Eku; Hatazawa, Jun

2009-01-01

The objective of this study was to investigate the effects of computed tomography (CT) artifacts caused by dental metal prostheses on positron emission tomography (PET) images. A dental arch cast was fixed in a cylindrical water-bath phantom. A spherical phantom positioned in the vicinity of the dental arch cast was used to simulate a tumor. To simulate the tumor imaging, the ratio of the 18 F-fluoro-deoxy-glucose radioactivity concentration of the spherical phantom to that of the water-bath phantom was set at 2.5. A dental bridge composed of a gold-silver-palladium alloy on the right mandibular side was prepared. A spherical phantom was set in the white artifact area on the CT images (site A), in a slightly remote area from the white artifact (site B), and in a black artifact area (site C). A PET/CT scan was performed with and without the metal bridge at each simulated tumor site, and the artifactual influence was evaluated on the axial attenuation-corrected (AC) PET images, in which the simulated tumor produced the strongest accumulation. Measurements were performed using three types of PET/CT scanners (scanners 1 and 2 with CT-based attenuation correction, and 3 with Cesium-137 ( 137 Cs)-based attenuation correction). The influence of the metal bridge was evaluated using the change rate of the SUVmean with and without the metal bridge. At site A, an overestimation was shown (scanner 1: +5.0% and scanner 2: +2.5%), while scanner 3 showed an underestimation of -31.8%. At site B, an overestimation was shown (scanner 1: +2.1% and scanner 2: +2.0%), while scanner 3 showed an underestimation of -2.6%. However, at site C, an underestimation was shown (scanner 1: -25.0%, scanner 2: -32.4%, and scanner 3: -8.4%). When CT is used for attenuation correction in patients with dental metal prostheses, an underestimation of radioactivity of accumulated tracer is anticipated in the dark streak artifact area on the CT images. In this study, the dark streak artifacts of the CT

Illness perceptions amongst individuals with dental caries.

Science.gov (United States)

Mafla, A C; Villalobos-Galvis, F H; Heft, M W

2018-03-01

To assess individuals' perception of dental caries, in order to explain how illness representations might influence their coping with the disease. Cross-sectional questionnaire study. 520 consecutive patients (aged ≥18 years) of the General Dentistry Clinic at Universidad Cooperativa de Colombia, Pasto, Colombia who had experienced dental caries. Illness perception of dental caries was assessed using the Illness Perception Questionnaire Revised (IPQ-R). The most frequent self-reported symptoms associated with dental caries were "toothache" (56.2%), "tooth sensitivity" (53.8%) and "mild to sharp pain when eating or drinking" (51.2%). The dimensions of illness perception were related to socio-economic status (SES). Symptoms of "loose or separating teeth" and "pus in your tooth" were associated with dental caries by low SES participants, while "bleeding while brushing, flossing or eating hard food" and "mild to sharp pain when eating or drinking something sweet, hot or cold" were related more to higher SES. Perceptions of caries were related to socioeconomic status. Interventions to promote health literacy in order to improve the capacity to obtain, process and understand basic oral health information could increase an early detection of caries. Copyright© 2018 Dennis Barber Ltd.

Parascapular mass revealing primary tuberculosis of the posterior arch

Science.gov (United States)

Arbault, Anais; Ornetti, Paul; Chevallier, Olivier; Avril, Julien; Pottecher, Pierre

2016-01-01

We report the case of a parascapular abscess revealing primary tuberculosis of the posterior arch in a 31-year-old man. Sectional imaging is essential in order to detect the different lesions of this atypical spinal tuberculosis as osteolysis of the posterior arch extendible to vertebral body, osteocondensation, epidural extension which is common in this location, and high specificity of a zygapophysial, costo-vertebral or transverse arthritis. PMID:27709081

Contemporary results of surgical repair of recurrent aortic arch obstruction.

Science.gov (United States)

Mery, Carlos M; Khan, Muhammad S; Guzmán-Pruneda, Francisco A; Verm, Raymond; Umakanthan, Ramanan; Watrin, Carmen H; Adachi, Iki; Heinle, Jeffrey S; McKenzie, E Dean; Fraser, Charles D

2014-07-01

There is a paucity of data on the current outcomes of surgical intervention for recurrent aortic arch obstruction (RAAO) after initial aortic arch repair in children. The goal of this study is to report the long-term results in these patients. All patients undergoing surgical intervention for RAAO at Texas Children's Hospital from 1995 to 2012 were included. The cohort was divided into four groups based on initial procedure: (1) simple coarctation repair, (2) Norwood procedure, (3) complex congenital heart disease, and (4) interrupted aortic arch. A total of 48 patients age 9 months (range, 22 days to 36 years) underwent 49 procedures for RAAO. All patients had an anatomic repair consisting of either patch aortoplasty (n=27, 55%), aortic arch advancement (n=8, 16%), sliding arch aortoplasty (n=6, 12%), placement of an interposition graft (n=2, 17%), reconstruction with donor allograft (n=4, 8%), extended end-to-end anastomosis (n=1, 2%), or redo Norwood-type reconstruction (n=1, 2%). Most procedures (n=46, 94%) were performed through a median sternotomy using cardiopulmonary bypass. At a median follow-up of 6.1 years (range, 9 days to 17 years), only 2 patients required surgical or catheter-based intervention for RAAO. Hypertension was present in 10% of patients at last follow-up. There were no neurologic or renal complications. There was 1 perioperative death after an aortic arch advancement in group 1. Four other patients have died during follow-up, none of the deaths related to RAAO. Anatomic repair of RAAO is a safe procedure associated with low morbidity and mortality, and low long-term reintervention rates. Copyright © 2014 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Acute Aortic Arch Perforation During Transcatheter Aortic Valve Replacement in Bicuspid Aortic Stenosis and a Gothic Aortic Arch.

Science.gov (United States)

Millan-Iturbe, Oscar; Sawaya, Fadi J; Bieliauskas, Gintautas; Chow, Danny H F; De Backer, Ole; Søndergaard, Lars

2017-09-01

Transcatheter aortic valve replacement (TAVR) has evolved from a novel technology to an established therapy for high/intermediate-risk patients with severe symptomatic aortic stenosis (AS). Although TAVR is used to treat bicuspid severe AS, the large randomized trials typically excluded bicuspid AS because of its unique anatomic features. This case report describes an acute aortic perforation during delivery of a transcatheter heart valve to treat a severe bicuspid AS with a "gothic aortic arch"; more careful evaluation of the preprocedural multislice computed tomographic scan would have unveiled a sharply angulated aortic arch. This life-threatening complication was successfully treated by thoracic endovascular aortic repair. Copyright © 2017 Canadian Cardiovascular Society. Published by Elsevier Inc. All rights reserved.

Dental esthetics--instrument for recreating a new facial esthetic to the elderly patient.

Science.gov (United States)

Scutariu, Mihaela Monica; Forna, Norina

2014-01-01

The major objective of this paper consists in underlining the wide range of possibilities in assessing the elderly patient; it relies on clinical examination in order to exclusively improve the patient's physiognomic aspect. In this context it has been organized a study which included 64 elderly patients aged between 60 and 90 years of age (median age 75), which presented themselves at the Clinical Service of Dental Semiology and Gerontostomatology between 2011-2012; they requested the restoration of the functions affected by odontal coronary lesions, periodontal disorders or edentations more or less expanded, malocclusions, malrelations of the mandible to the skull and unsuccessful or deteriorated dental or prosthetic treatments. The restoration of dental arches has been performed relying on common sense and power of discernment, respecting both facial features and expression by redimensioning the lower part of the face, repositioning the mandible and using gnatoprosthetic devices. Solving the problems elderly patients confront themselves with and the success of the treatment has been possible only after a correct assessment of the involutive phenomena that influence the oral cavity, after understanding the local and general factors that predispose to oral disorders as well as the differences between various techniques and materials.

The Response of Clamped Shallow Sandwich Arches with Metallic Foam Cores to Projectile Impact Loading

Directory of Open Access Journals (Sweden)

Yanping Fan

Full Text Available Abstract The dynamic response and energy absorption capabilities of clamped shallow sandwich arches with aluminum foam core were numerically investigated by impacting the arches at mid-span with metallic foam projectiles. The typical deformation modes, deflection response, and core compression of sandwich arches obtained from the tests were used to validate the computation model. The resistance to impact loading was quantified by the permanent transverse deflection at mid-span of the arches as a function of projectile momentum. The sandwich arches have a higher shock resistance than the monolithic arches of equal mass, and shock resistance could be significantly enhanced by optimizing geometrical configurations. Meanwhile, decreasing the face-sheet thickness and curvature radius could enhance the energy absorption capability of the sandwich arches. Finite element calculations indicated that the ratio of loading time to structural response time ranged from 0.1 to 0.4. The projectile momentum, which was solely used to quantify the structural response of sandwich arches, was insufficient. These findings could provide guidance in conducting further theoretical studies and producing the optimal design of metallic sandwich structures subjected to impact loading.

Root Canal Therapy Reduces Multiple Dimensions of Pain: A National Dental PBRN Study

Science.gov (United States)

Law, Alan S.; Nixdorf, Donald R.; Rabinowitz, Ira; Reams, Gregory J.; Smith, James A.; Torres, Anibal V.; Harris, D. Robert

2014-01-01

Background Initial orthograde root canal therapy (RCT) is used to treat dentoalveolar pathosis. The affect RCT has on pain intensity has been frequently reported, but the affect on other dimensions of pain has not. Also, the lack of large prospective studies involving diverse groups of patients and practitioners that are not involved in data collection suggest that there are multiple opportunities for bias to be introduced when this data is systematically aggregated. Method This prospective observational study assessed pain intensity, duration, and its interference with daily activities among RCT patients. Sixty-two practitioners (46 general dentists, 16 endodontists) in the National Dental Practice-Based Research Network enrolled patients requiring RCT. Patient reported data were collected before, immediately following, and one week after treatment using the Graded Chronic Pain Scale. Results Enrollment of 708 patients was completed over 6 months with 655 patients (93%) providing one-week follow-up data. Prior to treatment, patients reported a mean (±standard deviation) worst pain intensity of 5.3±3.8 (0-10 scale), 50% had “severe” pain (≥7), and mean days in pain and days pain interfered with activities were 3.6±2.7 and 0.5±1.2, respectively. Following treatment, patients reported a mean worst pain intensity of 3.0±3.2, 19% had “severe” pain, and mean days in pain and days with pain interference were 2.1±2.4 and 0.4±1.1, respectively. All changes were statistically significant (ppain, significantly reducing pain intensity, duration, and related interference. Further research is needed to reduce the proportion of patients reporting “severe” post-operative pain. PMID:25190605

Initial arch wires for alignment of crooked teeth with fixed orthodontic braces.

LENUS (Irish Health Repository)

Wang, Yan

2010-01-01

The initial arch wire is the first arch wire to be inserted into the fixed appliance at the beginning of orthodontic treatment and is used mainly for correcting crowding and rotations of teeth. With a number of orthodontic arch wires available for initial tooth alignment, it is important to understand which wire is most efficient, as well as which wires cause the least amount of root resorption and pain during the initial aligning stage of treatment.

Relation of Gothic arch apex to dentist-assisted centric relation.

Science.gov (United States)

Myers, M; Dziejma, R; Goldberg, J; Ross, R; Sharry, J

1980-07-01

These data suggest that the widely held belief that thumb pressure can position the mandible consistently more posterior than the position indicated by the Gothic arch apex is unfounded. Furthermore, this study provides no evidence to support the contention that the dentist-assisted jaw relation is more reproducible than the relation indicated by the Gothic arch apex.

Effect of the transpalatal arch during extraction treatment.

Science.gov (United States)

Zablocki, Heather L; McNamara, James A; Franchi, Lorenzo; Baccetti, Tiziano

2008-06-01

The transpalatal arch (TPA) can be used as an adjunct during orthodontic treatment to help control the movement of the maxillary first molars in 3 dimensions, including producing molar rotation and uprighting, maintaining transverse dimensions posteriorly during treatment, and maintaining leeway spaces during the transition of the dentition. The purpose of this retrospective cephalometric study was to test an additional function of the TPA: its ability to enhance orthodontic anchorage during extraction treatment. Records consisting of pretreatment and posttreatment cephalograms were gathered from several orthodontic practices that used an .018 x .025-in preangulated appliance. All patients were white and had 4 first premolars extracted as part of their treatment protocol. Patients were treated either with or without a TPA of the soldered Goshgarian design. Patients were excluded if headgear or any other auxiliary anchorage device beside the TPA was used during treatment. Matched samples of 30 patients were identified based on sex, age at the start of treatment, treatment duration, and cervical vertebral maturation stage. Statistical comparisons were made with nonparametric statistical tests. Analysis of the changes from pretreatment to posttreatment for the TPA and the no-TPA groups showed no statistically significant differences in any of the variables examined. The net difference for both vertical and mesial movement of the maxillary first molar in relation to the maxilla between the 2 groups was 0.4 mm, with the no-TPA group in a more downward and forward position. Although the usefulness of the TPA for the abovementioned functions is not negated, it does not provide a significant effect on either the anteroposterior or the vertical position of the maxillary first molars during extraction treatment.

Computers in dental radiography: a scenario for the future

International Nuclear Information System (INIS)

Webber, R.L.

1985-01-01

The recent emergence of cost-effective computing power makes it possible to integrate sophisticated data-sampling and image-interpretation techniques into dental radiography for the first time. A prototype system is being developed to permit clinical information expressed in three dimensions--plus time--to be made visible almost instantly. The associated X-ray dose for a complete three-dimensional survey of a selected dental region is predicted to be less than that required for a single conventional periapical radiograph exposed on D-speed film

The effects of initial rise and axial loads on MEMS arches

KAUST Repository

Tella, Sherif Adekunle

2017-04-07

Arch microbeams have been utilized and proposed for many uses over the past few years due to their large tunability and bistability. However, recent experimental data have shown different mechanical behavior of arches when subjected to axial loads. This paper aims to investigate in depth the influence of the competing effects of initial rise and axial loads on the mechanical behavior of micromachined arches; mainly their static deflection and resonant frequencies. Based on analytical solutions, the static response and eigenvalue problems are analyzed for various values of initial rises and axial loads. Universal curves showing the variation of the first three resonance frequencies of the arch are generated for various values of initial rise under both tensile and compressive axial loads. This study shows that increasing the tensile or compressive axial loads for different values of initial rise may lead to either increase in the stiffness of the beam or initial decrease in the stiffness, which later increases as the axial load is increased depending on the dominant effect of the initial rise of the arch and the axial load. The obtained universal curves represent useful design tools to predict the tunability of arches under axial loads for various values of initial rises. The use of the universal curves is demonstrated with an experimental case study. Analytical formulation is developed to predict the point of minimum where the trend of the resonance frequency versus axial loads changes qualitatively due to the competing effects of axial loads and initial curvature.

Study on real working performance and overload safety factor of high arch dam

Institute of Scientific and Technical Information of China (English)

2008-01-01

Considering the fact that high arch dams have problems such as complicated stress,high cost,and hazards after being damaged,this paper intends to study the effects of load,material strength,and safety analysis method on dam safety and working performance of arch dams.In this article,the effects of temperature,self weight exaction way and water loading on structure response are first discussed,and a more reasonable way of considering is then put forward.By taking into consideration the mechanical property of materials and comparing the effects of different yield criteria on overloading safety of high arch dams,this paper concludes that brittle characteristics of concrete should be fully considered when conducting safety assessment for high arch dams to avoid overestimating the bearing capacity of the dams.By comparing several typical projects,this paper works out a safety assessment system of multiple safety and relevant engineering analogical analysis methods,which is closer to the actual situation,and thus is able to assess the response of high arch dam structure in a more comprehensive way,elicit the safety coefficients in different situations,and provide a new way of considering the safety assessment of high arch dams.

The Effect of an Extramural Program on the Perceived Clinical Competence of Dental Hygiene Students.

Science.gov (United States)

Butters, Janice M.; Vaught, Randall L.

1999-01-01

A study investigated the effect of an extramural rotation on dental-hygiene students' self-perceptions of competence in specific clinical areas. Results indicate student perceptions of competence improved significantly on six of 19 dimensions of dental-hygiene practice over the course of the rotation, suggesting that rotation is a valuable…

Dental implants for severely atrophied jaws due to ectodermal dysplasia

Directory of Open Access Journals (Sweden)

Preetha Balaji

2015-01-01

Full Text Available The aim was to present the successful esthetical and functional rehabilitation of partial anodontia in a case of severe ectodermal dysplasia with complete atrophy of the jaws. A 17-year-old male with Class III malocclusion with partial anodontia sought dental implant treatment. His expectation was that of Class I occlusion. The challenge in the case was to match the expectation, reality, and the clinical possibilities. Ridge augmentation was performed with a combination of rib graft and recombinant human bone morphogenetic protein-2. Simultaneously, 6 implants (Nobel Biocare™ - Tapered Groovy were placed in maxillary arch and 10 in the mandible. Simultaneous placement ensured faster and better osseointegration though a mild compromise of the primary stability was observed initially. After adequate healing, Customized Zirconia Procera™ system was used to build the framework. Zirconia crown was cemented to the framework. Radiological and clinical evidence of osseointegration was observed in all 16 dental implants. Successful conversion of Class III to Class I occlusion was achieved with the combination of preprosthetic alveolar ridge augmentation, Procera™ Implant Bridge system. Abnormal angulations and or placement of dental implants would result in failure of the implant. Hence conversion of Class III to Class I occlusion needs complete and complex treatment planning so that the entire masticatory apparatus is sufficiently remodeled. Planning should consider the resultant vectors that would otherwise result in failure of framework or compromise the secondary stability of the dental implant during function. A successful case of rehabilitation of complex partial anodontia is presented.

Dental care of patients after surgical therapy of inborn oro-facial clefts 3D technologies in diagnostics and therapy of cleft patients

OpenAIRE

Kašparová, Magdaléna

2015-01-01

Patients with orofacial defects, inborn or acquired, isolated or in combination with other handicaps in syndroms, suffer from various problems including psychological problems. Morphological changes within these handicaps burden not only the patients themselves, but also their families. Among the main problems are difficulties with feeding, speech or breathing. Anomalies in number or position of deciduous and permanent teeth, development of jaws and dental arches are often present. Multidisci...

Effective way to reconstruct arch bridges using concrete walls and transverse strands

Science.gov (United States)

Klusáček, Ladislav; Pěkník, Robin; Nečas, Radim

2017-09-01

There are more than 500 masonry arch bridges in the Czech Road system and about 2500 in the Czech Railway system. Many of them are cracked in the longitudinal (span) direction. The barrel vaults are separated by the cracks into partial masonry arches without load bearing connection in transverse direction. These constructions are about 150 years old and they are also too narrow for the current road system. This paper presents a strengthening method for masonry arch bridges using transverse post-tensioning. This method is very useful not only for strengthening in the transverse direction, but widening of masonry arches can be taken as secondary effect especially in case of road bridges. Several bridges were successfully repaired with the use of this system which seems to be effective and reliable.

Prosthetic status and prosthetic need among the patients attending various dental institutes of ahmedabad and gandhinagar district, gujarat.

Science.gov (United States)

Shah, Vrinda R; Shah, Darshana N; Parmar, Chaitanya H

2012-09-01

The oral health being an integral part for the healthy living, necessity of disability limitation and rehabilitation in oral health has taken a paramount role. To assess the prosthetic status and to evaluate the prosthetic needs of the patients attending various institutes of Ahmedabad and Gandhinagar district. A total of 510 (264 males and 246 females) subjects at various dental institutes were examined in the study. A survey proforma was prepared with the help of WHO oral health assessment form (1997). Prosthetic status and prosthetic treatment need was recorded. Out of 510, any type of Edentulousness was 322 (63 %). Among them, 254 (49.8 %) were partially edentulous while 68 (13.3 %) were completely edentulous. Only 69 (13 %) were having any prosthesis in upper arch while only 80 (16 %) were having any prosthesis in lower arch. Need for any type of prosthesis in upper and lower arch was 55 and 60 % in males and females, respectively. In lower social class group need of prosthesis in upper and lower arch was 62 and 63 %, respectively. It was found that prosthetic status and prosthetic treatment need increased with increase in age. Steps should be taken to overcome this disparity and more emphasis should be given to meet the felt need of the people through government and non government organizations to improve the oral health. The unmet prosthetic treatment need should be met to rehabilitate needy people so that their disability may be limited.

Cost of skid roads for arch logging in West Virginia

Science.gov (United States)

George R., Jr. Trimble; Carl R. Barr

1960-01-01

In the mountain hardwood country of the northern Appalachians, tree-length skidding with tractor and arch has proved to be economical logging. One essential part of this type of logging is that tree-length logs are winched to the skid roads: tractor and arch do not run around through the woods. Winching distance is commonly 200 to 300 feet; and occasionally an extra...

ŁPw Steel Arch Support – Designing and Test Results

Directory of Open Access Journals (Sweden)

Marek Rotkegel

2013-01-01

Full Text Available Increasingly difficult geological-mining conditions make it necessary to seek new and effective ways of securing roadways. The new types of support must meet very high strength requirements and must have very high load-bearing capacities. These two conditions were taken into consideration when an ŁPw type steel arch support was designed. High strength of the arches was obtained through using steel of improved mechanical parameters, while high load-bearing parameters were obtained through shaping elements of the support arches. The works were conducted within the framework of the targeted research project no. 6ZR8 2008 C/07012 undertaken by Huta Łabędy SA, Institute for Ferrous Metallurgy and Central Mining Institute between 2010 and 2012.

Rearfoot eversion has indirect effects on plantar fascia tension by changing the amount of arch collapse.

Science.gov (United States)

Lee, Sae Yong; Hertel, Jay; Lee, Sung Cheol

2010-01-01

Rearfoot eversion motion and arch height are believed to contribute to increased tension on the plantar fascia and arch collapse during gait but the specifics of these relationships are not clear. To examine the relationships among static arch height, rearfoot eversion, dynamic arch height, and plantar fascia tension. 28 healthy males participated. After static arch height was measured, the subjects were asked to run at 4.5m/s while frontal plane rearfoot motion, dynamic arch height, and ground reaction forces were collected. The relationships among variables were examined with bivariate correlations and path analysis. The results indicated a high correlation between dynamic arch height and static arch height (r=0.642), plantar fascia tension (r=-0.797), and maximum rearfoot eversion motion during gait (r=-0.518). The path analysis model without the direct rearfoot eversion effect explained 81.2% of the variance in plantar fascia tension, while the model with the direct rearfoot eversion effect explained 82.1% of the variance in plantar fascia tension. Including the indirect effect of maximum rearfoot eversion motion on plantar fascia tension through control of dynamic arch height is the model that best explains the interrelationships of these foot characteristics. The amount of maximum rearfoot eversion motion itself is not a good predictor of plantar fascia tension, however, together with the arch height, maximum rearfoot eversion motion is a good predictor because it has a pronounced indirect effect on plantar fascia tension. Copyright 2010. Published by Elsevier Ltd.

Recurrent Pneumonia due to Double Aortic Arch

Directory of Open Access Journals (Sweden)

I. Sedighi

2012-04-01

Full Text Available Introduction: Pneumonia is one of the most common infections during childhood. In children with recurrent bacterial pneumonia complete evaluation for underlying factors is necessary. The most common underlying diseases include: antibody deficiencies , cystic fibrosis , tracheoesophageal fistula and increased pulmonary blood flow. Vascular ring and its pressure effect is a less common cause of stridor and recurrent pneumonia. Congenital abnormalities in aortic arch and main branches which form vascular ring around esophagus and trachea with variable pressure effect cause respiratory symptoms such as stridor , wheezing and recurrent pneumoniaCase Report: A 2 year old boy was admitted in our hospital with respiratory distress and cough . Chest x-Ray demonstrated right lobar pneumonia. He had history of stridor and wheezing from neonatal period and hospitalization due to pneumonia for four times. The patient received appropriate antibiotics. Despite fever and respiratory distress improvement, wheezing continued. Review of his medical documents showed fixed pressure effect on posterior aspect of esophagus in barium swallow. In CT angiography we confirmed double aortic arch.Conclusion: Double aortic arch is one of the causes of persistant respiratory symptom and recurrent pneumonia in children for which fluoroscopic barium swallow is the first non-invasive diagnostic method.(Sci J Hamadan Univ Med Sci 2012;19(1:70-74

Highly Tunable Electrothermally Actuated Arch Resonator

KAUST Repository

Hajjaj, Amal Z.; Ramini, Abdallah; Alcheikh, Nouha; Younis, Mohammad I.

2016-01-01

that after some electro-thermal voltage load, the third resonance frequency starts to become more sensitive to the axial thermal stress, while the first resonance frequency becomes less sensitive. These results can be used as guidelines to utilize arches

How to Perfuse: Concepts of Cerebral Protection during Arch Replacement

Directory of Open Access Journals (Sweden)

Andreas Habertheuer

2015-01-01

Full Text Available Arch surgery remains undoubtedly among the most technically and strategically challenging endeavors in cardiovascular surgery. Surgical interventions of thoracic aneurysms involving the aortic arch require complete circulatory arrest in deep hypothermia (DHCA or elaborate cerebral perfusion strategies with varying degrees of hypothermia to achieve satisfactory protection of the brain from ischemic insults, that is, unilateral/bilateral antegrade cerebral perfusion (ACP and retrograde cerebral perfusion (RCP. Despite sophisticated and increasingly individualized surgical approaches for complex aortic pathologies, there remains a lack of consensus regarding the optimal method of cerebral protection and circulatory management during the time of arch exclusion. Many recent studies argue in favor of ACP with various degrees of hypothermic arrest during arch reconstruction and its advantages have been widely demonstrated. In fact ACP with more moderate degrees of hypothermia represents a paradigm shift in the cardiac surgery community and is widely adopted as an emergent strategy; however, many centers continue to report good results using other perfusion strategies. Amidst this important discussion we review currently available surgical strategies of cerebral protection management and compare the results of recent European multicenter and single-center data.

How to Perfuse: Concepts of Cerebral Protection during Arch Replacement

Science.gov (United States)

Habertheuer, Andreas; Wiedemann, Dominik; Kocher, Alfred; Laufer, Guenther; Vallabhajosyula, Prashanth

2015-01-01

Arch surgery remains undoubtedly among the most technically and strategically challenging endeavors in cardiovascular surgery. Surgical interventions of thoracic aneurysms involving the aortic arch require complete circulatory arrest in deep hypothermia (DHCA) or elaborate cerebral perfusion strategies with varying degrees of hypothermia to achieve satisfactory protection of the brain from ischemic insults, that is, unilateral/bilateral antegrade cerebral perfusion (ACP) and retrograde cerebral perfusion (RCP). Despite sophisticated and increasingly individualized surgical approaches for complex aortic pathologies, there remains a lack of consensus regarding the optimal method of cerebral protection and circulatory management during the time of arch exclusion. Many recent studies argue in favor of ACP with various degrees of hypothermic arrest during arch reconstruction and its advantages have been widely demonstrated. In fact ACP with more moderate degrees of hypothermia represents a paradigm shift in the cardiac surgery community and is widely adopted as an emergent strategy; however, many centers continue to report good results using other perfusion strategies. Amidst this important discussion we review currently available surgical strategies of cerebral protection management and compare the results of recent European multicenter and single-center data. PMID:26713319

Anomalous Origin of the Left Vertebral Artery from the Aortic Arch.

Science.gov (United States)

Einstein, Evan H; Song, Linda H; Villela, Natalia L A; Fasani-Feldberg, Gregory B; Jacobs, Jonathan L; Kim, Dolly O; Nathawat, Akshay; Patel, Devika; Bender, Roger B; Peters, Daniel F

2016-04-01

Anatomic anomalies of the aortic arch have implications for clinical practice if their significance is understood. Our case study involves a cadaveric finding of the left vertebral artery originating directly from the aortic arch. Although this anatomical variation has been documented, the prevalence of this anomaly may be generally underestimated. After noting this anomaly, we analyzed 27 cases and found that four female cadavers had the left vertebral artery originating from the aortic arch rather than the left subclavian artery. With a prevalence rate of 14.8%, it would seem that this anomaly is more significant than previously thought, which could have implications for surgical practice.

Evaluation of skin exposure of patients and the irradiation field dimensions in dental radiography

International Nuclear Information System (INIS)

Khoury, H.J.; Hazin, C.A.; Andrade Lima, F.R.; Lopes Filho, F.J.

1991-01-01

This work aimed to estimate the skin exposure to patients in dental radiography, as well as, evaluate the magnitude of the skin area irradiated during a typical radiographic procedure. The study was based in a preliminary survey of dental X-ray equipments installed in the metropolitan region of Recife. The results showed that in 90% of the equipments surveyed the estimated patient skin exposure was above the recommended value of 500 mR. For X-ray beam diameters, the results showed values ranging from 4.5 to 11.5 cm, which do not agree with those set up by either national or international radiation protection organizations. (author)

A new method of stabilizing zygomatic complex and arch fractures. a ...

African Journals Online (AJOL)

Background: Antral packing cannot support fractures of the zygomatic arch properly because of the position, therefore the aim of this report was to document a new method by which both the zygomatic bone and arch can be stabilized. Method and Materials: Iodine soaked gauze was placed in the subzygomatic space ...

Relationship between the mobility of medial longitudinal arch and postural control

Directory of Open Access Journals (Sweden)

Tansu Birinci

2017-05-01

Conclusion: Our results suggest that decrease of arch mobility on the dominant foot is associated with posterior sway by causing knee or hip strategy and preventing ankle strategy even in small perturbations. The rate of deviation from the equilibrium point and the degree of total swaying increase when arch mobility decreases.

Variations of the aortic arch - a study on the most common branching patterns

International Nuclear Information System (INIS)

Muller, Marguerite; Schmitz, Bernd L; Schick, Melanie; Schloetzer, Wiebke; Pauls, Sandra; Roehrer, Stefan; Kapapa, Thomas

2011-01-01

Background: Anatomical variants of the aortic arch and its branching patterns often appear as an incidental finding during routine computed tomography (CT) scanning. These variations can be of relevance when performing angiography or endovascular interventions and may cause symptoms such as dysphagia. Purpose: To analyze common anatomical variations found within the arteries originating from the aortic arch in patients using contrast CT imaging techniques. Material and Methods: A total of 2033 contrast CT scans were analyzed. To obtain a truly representative sample, cases were chosen from different hospital departments without previous knowledge of the patient history. Results: The total percentage of variations within the analyzed patients was 13.3%. In 8.0% a truncus bicaroticus was found. 4.2% of the patients showed a left vertebral artery originating directly from the aortic arch, mostly proximal, and in 1 case distal to the left subclavian artery. In 1.0% we found an aberrant right subclavian artery. We also found a single case of a right descending aortic arch. Conclusion: Variations of the aortic arch and its branching are frequently found, mostly as an incidental finding during routine diagnostic scanning. A contrast-enhanced CT scan is a good method with which to study the aortic arch and its associated branching pattern

Variations of the aortic arch - a study on the most common branching patterns

Energy Technology Data Exchange (ETDEWEB)

Muller, Marguerite; Schmitz, Bernd L; Schick, Melanie; Schloetzer, Wiebke (Dept. of Diagnostic and Interventional Radiology, Section Neuroradiology, Univ. Ulm (Germany)), email: marguerite.mueller@uni-ulm.de; Pauls, Sandra (Dept. of Diagnostic and Interventional Radiology, Univ. Ulm (Germany)); Roehrer, Stefan; Kapapa, Thomas (Dept. of Neurosurgery, Univ. Ulm (Germany))

2011-09-15

Background: Anatomical variants of the aortic arch and its branching patterns often appear as an incidental finding during routine computed tomography (CT) scanning. These variations can be of relevance when performing angiography or endovascular interventions and may cause symptoms such as dysphagia. Purpose: To analyze common anatomical variations found within the arteries originating from the aortic arch in patients using contrast CT imaging techniques. Material and Methods: A total of 2033 contrast CT scans were analyzed. To obtain a truly representative sample, cases were chosen from different hospital departments without previous knowledge of the patient history. Results: The total percentage of variations within the analyzed patients was 13.3%. In 8.0% a truncus bicaroticus was found. 4.2% of the patients showed a left vertebral artery originating directly from the aortic arch, mostly proximal, and in 1 case distal to the left subclavian artery. In 1.0% we found an aberrant right subclavian artery. We also found a single case of a right descending aortic arch. Conclusion: Variations of the aortic arch and its branching are frequently found, mostly as an incidental finding during routine diagnostic scanning. A contrast-enhanced CT scan is a good method with which to study the aortic arch and its associated branching pattern

Contemporary permanent tooth dimensions, with comparisons to G.V. Black's data.

Science.gov (United States)

Harris, Edward F; Burris, Benjamin G

2003-01-01

The tooth dimensions most commonly cited in the dental literature are those published by the famous restorative dentist G. V. Black late in the 19th century. We report here on the crown dimensions of a large series of contemporary North American Whites and show that Black's values differ significantly from modern values, but not in any consistent or predictable fashion. Black supplied no information about the nature of his sample. We suggest that it may be time to replace Black's data with modern tooth size standards.

Out-of-plane buckling of roller bent wide flange arches - imperfections and finite element modeling

NARCIS (Netherlands)

Spoorenberg, R.C.; Snijder, H.H.; Hoenderkamp, J.C.D.; Beg, D.; Chan, S.L.; Shu, G.P.

2012-01-01

Steel arches are used more and more in contemporary architecture, combining structural efficiency with architectural merits. If lateral supports are absent, these arches are prone to out-of-plane buckling. Arches are often made by cold bending wide flange beams at ambient temperature. This

Distance Education in Dental Hygiene Bachelor of Science Degree Completion Programs: As Perceived by Students and Faculty

Science.gov (United States)

Tsokris, Maureen

2010-01-01

This study investigated student and faculty perceptions of their experiences with online learning in dental hygiene Bachelor of Science degree completion programs on the dimensions of: quality of learning, connectedness to the learning environment, technology factors and student satisfaction. The experiences of dental hygiene students who took…

Correlation and agreement of a digital and conventional method to measure arch parameters.

Science.gov (United States)

Nawi, Nes; Mohamed, Alizae Marny; Marizan Nor, Murshida; Ashar, Nor Atika

2018-01-01

The aim of the present study was to determine the overall reliability and validity of arch parameters measured digitally compared to conventional measurement. A sample of 111 plaster study models of Down syndrome (DS) patients were digitized using a blue light three-dimensional (3D) scanner. Digital and manual measurements of defined parameters were performed using Geomagic analysis software (Geomagic Studio 2014 software, 3D Systems, Rock Hill, SC, USA) on digital models and with a digital calliper (Tuten, Germany) on plaster study models. Both measurements were repeated twice to validate the intraexaminer reliability based on intraclass correlation coefficients (ICCs) using the independent t test and Pearson's correlation, respectively. The Bland-Altman method of analysis was used to evaluate the agreement of the measurement between the digital and plaster models. No statistically significant differences (p > 0.05) were found between the manual and digital methods when measuring the arch width, arch length, and space analysis. In addition, all parameters showed a significant correlation coefficient (r ≥ 0.972; p digital and manual measurements. Furthermore, a positive agreement between digital and manual measurements of the arch width (90-96%), arch length and space analysis (95-99%) were also distinguished using the Bland-Altman method. These results demonstrate that 3D blue light scanning and measurement software are able to precisely produce 3D digital model and measure arch width, arch length, and space analysis. The 3D digital model is valid to be used in various clinical applications.

Dental practice satisfaction with preferred provider organizations

Directory of Open Access Journals (Sweden)

Schilling Elizabeth A

2007-11-01

Full Text Available Abstract Background Despite their increasing share of the dental insurance market, little is known about dental practices' satisfaction with preferred provider organizations (PPOs. This analysis examined practice satisfaction with dental PPOs and the extent to which satisfaction was a function of communications from the plan, claims handling and compensation. Methods Data were collected through telephone surveys with dental practices affiliated with MetLife between January 2002 and December 2004. Each respondent was asked a series of questions related to their satisfaction with a systematically selected PPO with which they were affiliated. Six different PPO plans had sufficient observations to allow for comparative analysis (total n = 4582. Multiple imputation procedures were used to adjust for item non-response. Results While the average level of overall satisfaction with the target plan fell between "very satisfied" and "satisfied," regression models revealed substantial differences in overall satisfaction across the 6 PPOs (p Conclusion Results demonstrate the importance of compensation to dental practice satisfaction with PPOs. However, these results also highlight the critical role of service-related factors in differentiating plans and suggest that there are important non-monetary dimensions of PPO performance that can be used to recruit and retain practices.

C-arm guided closed reduction of zygomatic arch fracture

International Nuclear Information System (INIS)

Eo, Yoon Ki; Lee, Dong Kun; Kim, Jeong Sam; Jang, Young Il

1999-01-01

The zygomatic arch is structurally protruded and is easily fractured. The classic management of zygomatic arch fracture has been mentioned the Keen, Lothrop, Dingman and Alling and threaded K-wire. All of the above methods have advantages and disadvantages. To minimize the disadvantages, we performed threaded K-wire for the first time using C-arm image intensifier. The subjects were 16 patients with Knight North group II (Zygomatic arch fracture). Among them the C-arm was used in 12 patients and the operator used sensitivity general method in 4 patients and confirmed the operation by mobile X-ray equipment. In conclusion, both groups were satisfied surgically and cosmetically. Using the C-arm, actual image at the time operation was clear and satisfied, the surrounding tissue damage was minimized and at was more accurately completed. The operation time was shortened by 30 to 60 minutes proving it to be an efficient method. We suggest though that further studies be needed to evaluate the radiation effect on these patients

Education About Dental Hygienists' Roles in Public Dental Prevention Programs: Dental and Dental Hygiene Students' and Faculty Members' and Dental Hygienists' Perspectives.

Science.gov (United States)

Pervez, Anushey; Kinney, Janet S; Gwozdek, Anne; Farrell, Christine M; Inglehart, Marita R

2016-09-01

In 2005, Public Act No. 161 (PA 161) was passed in Michigan, allowing dental hygienists to practice in approved public dental prevention programs to provide services for underserved populations while utilizing a collaborative agreement with a supervising dentist. The aims of this study were to assess how well dental and dental hygiene students and faculty members and practicing dental hygienists have been educated about PA 161, what attitudes and knowledge about the act they have, and how interested they are in additional education about it. University of Michigan dental and dental hygiene students and faculty members, students in other Michigan dental hygiene programs, and dental hygienists in the state were surveyed. Respondents (response rate) were 160 dental students (50%), 63 dental hygiene students (82%), 30 dental faculty members (26%), and 12 dental hygiene faculty members (52%) at the University of Michigan; 143 dental hygiene students in other programs (20%); and 95 members of the Michigan Dental Hygienists' Association (10%). The results showed that the dental students were less educated about PA 161 than the dental hygiene students, and the dental faculty members were less informed than the dental hygiene faculty members and dental hygienists. Responding dental hygiene faculty members and dental hygienists had more positive attitudes about PA 161 than did the students and dental faculty members. Most of the dental hygiene faculty members and dental hygienists knew a person providing services in a PA 161 program. Most dental hygiene students, faculty members, and dental hygienists wanted more education about PA 161. Overall, the better educated about the program the respondents were, the more positive their attitudes, and the more interested they were in learning more.

Evaluation of Moyers mixed dentition analysis in school children

Directory of Open Access Journals (Sweden)

Durgekar Sujala

2009-01-01

Full Text Available Background and Objective: The purpose of this study is to test the reliability of Moyers mixed dentition analysis in school children. Materials and Methods: A study was conducted on a sample of 150 school children within the age group of 13 to 16 years old who had all permanent teeth that were fully erupted. Dental impressions were taken with alginate impression material and immediately poured with dental stone. Mesiodistal dimensions of permanent mandibular incisors, maxillary and mandibular canines, and premolars were measured using a digital caliper with a resolution of 0.01 mm. Statistical Analysis: The coefficient of correlation (r was calculated to find the correlation between the sums of the canine, premolars in both arches, and mandibular incisors. A Student′s unpaired t test was calculated to compare the tooth dimension between male and female subjects. The actual measurements were compared with the predicted values obtained with the Moyers prediction tables at the 35 th , 50 th , and 75 th percentile confidence levels. A Student′s t test was calculated to compare the actual and predicted values. Using this data, linear regression equations were formulated for tooth size prediction. The coefficient of determination [r2] was calculated to find the accuracy of the formulated prediction equations. The standard error of estimate (SEE was calculated to determine the validity of the proposed equations. Results: Moyers prediction tables are not an accurate method to estimate tooth dimension in our samples. The mesiodistal crown dimension in the buccal segment of the mandibular arch was larger in males (p=0.04 than in females. Conclusion: The differences noted between predicted values from the Moyers tables and that of the present investigation is the result of racial and ethnic diversity. The accuracy of the prediction equation should be tested in a larger sample.

Maxillary segmental distraction in children with unilateral clefts of lip, palate, and alveolus.

Science.gov (United States)

Zemann, Wolfgang; Pichelmayer, Margit

2011-06-01

Alveolar clefts are commonly closed by a bone grafting procedure. In cases of wide clefts the deficiency of soft tissue in the cleft area may lead to wound dehiscence and loss of the bony graft. Segmental maxillary bony transfer has been mentioned to be useful in such cases. Standard distraction devices allow unidirectional movement of the transported segment. Ideally the distraction should strictly follow the dental arch. The aim of this study was to analyze distraction devices that were adapted to the individual clinical situation of the patients. The goal was to achieve a distraction strictly parallel to the dental arch. Six children with unilateral clefts of lip, palate, and alveolus between 12 and 13 years of age were included in the study. The width of the cleft was between 7 and 19 mm. Dental cast models were used to manufacture individual distraction devices that should allow a segmental bony transport strictly parallel to the dental arch. Segmental osteotomy was performed under general anesthesia. Distraction was started 5 days after surgery. All distracters were tooth fixed but supported by palatal inserted orthodontic miniscrews. In all patients, a closure of the alveolar cleft was achieved. Two patients required additional bone grafting after the distraction procedure. The distraction was strictly parallel to the dental arch in all cases. In 1 case a slight cranial displacement of the transported maxillary segment could be noticed, leading to minor modifications of the following distractors. Distraction osteogenesis is a proper method to close wide alveolar clefts. Linear segmental transport is required in the posterior part of the dental arch, whereas in the frontal part the bony transport should run strictly parallel to the dental arch. An exact guided segmental transport may reduce the postoperative orthodontic complexity. Copyright © 2011 Mosby, Inc. All rights reserved.

An Insight into Spiritual Health and Coping Tactics among Dental Students; A Gain or Blight: A Cross-sectional Study.

Science.gov (United States)

Dhama, Kuldeep; Gupta, Ritu; Singla, Ashish; Patthi, Basavaraj; Ali, Irfan; Niraj, Lav Kumar; Kumar, Jishnu Krishna; Prasad, Monika

2017-08-01

Spiritual health is the youngest dimension of health which affects the coping skills of the individual and may help the dental students who are the caregivers of the future, to overcome crisis situation with time. To measure the association between spiritual health and coping skills among the dental students of private dental college. A questionnaire based cross-sectional study was conducted to assess the spiritual health status using Spiritual Health Assessment Scale (SHAS) and coping skills using Adolescent Coping Orientation for Problem Experiences (ACOPE) scale among the 389 dental students of different academic years in a private dental college. The data obtained was subjected to descriptive statistics and means were compared using independent t-test and one-way ANOVA. The mean age of the study participants was 22.8±3.17 years. Majority of the students had fair spiritual health score (74.55%). Of the coping strategies dimension, highest mean score was observed in seeking diversions (3.60±1.40) and the least mean score was observed in engaging in demanding activities (2.67±1.41). Statistically significant association was seen between dimension of coping behaviour and spiritual health (p≤ 0.05). The present study highlights that spiritual health plays a central role and influences the coping strategies in human health. The spiritual health can continuously compensate with other health like mental, physical and social well-being.

First and second branchial arch syndromes: multimodality approach

Energy Technology Data Exchange (ETDEWEB)

Senggen, Elodie; Laswed, Tarek; Meuwly, Jean-Yves; Maestre, Leonor Alamo; Meuli, Reto; Gudinchet, Francois [University Hospital of Lausanne, Radiology Department, Lausanne (Switzerland); Jaques, Bertrand [University Hospital of Lausanne, Department of Otorhinolaryngology, Lausanne (Switzerland)

2011-05-15

First and second branchial arch syndromes (BAS) manifest as combined tissue deficiencies and hypoplasias of the face, external ear, middle ear and maxillary and mandibular arches. They represent the second most common craniofacial malformation after cleft lip and palate. Extended knowledge of the embryology and anatomy of each branchial arch derivative is mandatory for the diagnosis and grading of different BAS lesions and in the follow-up of postoperative patients. In recent years, many new complex surgical approaches and procedures have been designed by maxillofacial surgeons to treat extensive maxillary, mandibular and external and internal ear deformations. The purpose of this review is to evaluate the role of different imaging modalities (orthopantomogram (OPG), lateral and posteroanterior cephalometric radiographs, CT and MRI) in the diagnosis of a wide spectrum of first and second BAS, including hemifacial microsomia, mandibulofacial dysostosis, branchio-oto-renal syndrome, Pierre Robin sequence and Nager acrofacial dysostosis. Additionally, we aim to emphasize the importance of the systematic use of a multimodality imaging approach to facilitate the precise grading of these syndromes, as well as the preoperative planning of different reconstructive surgical procedures and their follow-up during treatment. (orig.)

Modal parameters identification and monitoring of two arches

Directory of Open Access Journals (Sweden)

Belloli Marco

2015-01-01

Full Text Available The paper presents the results of the modal parameters identification and of the continuous monitoring of two arches built in the new area of Expo 2015 in Milan. The activities on the arches were performed during the erection stage and they were planned as a consequence of preliminary studies performed at Politecnico di Milano wind tunnel, that highlighted dynamic instability due to the wind. In particular, the first two bending modes of the structures showed a critical behaviour and for this reason a TMD (Tuned Mass Damping system was designed in order to control these modes. At first, frequencies, damping and modal deflected shapes were evaluated in order to check the numerical FEM model, to tune the TMD system and to check its correct functioning. The two arches were then monitored for several months to observe their dynamic behaviour under different wind conditions. A good database about the strongest and the most frequent winds in the site was obtained. The accelerations registered under strong wind conditions did not reach dangerous levels for the structures, moreover these results showed a good agreement with the wind tunnel ones.

First and second branchial arch syndromes: multimodality approach

International Nuclear Information System (INIS)

Senggen, Elodie; Laswed, Tarek; Meuwly, Jean-Yves; Maestre, Leonor Alamo; Meuli, Reto; Gudinchet, Francois; Jaques, Bertrand

2011-01-01

First and second branchial arch syndromes (BAS) manifest as combined tissue deficiencies and hypoplasias of the face, external ear, middle ear and maxillary and mandibular arches. They represent the second most common craniofacial malformation after cleft lip and palate. Extended knowledge of the embryology and anatomy of each branchial arch derivative is mandatory for the diagnosis and grading of different BAS lesions and in the follow-up of postoperative patients. In recent years, many new complex surgical approaches and procedures have been designed by maxillofacial surgeons to treat extensive maxillary, mandibular and external and internal ear deformations. The purpose of this review is to evaluate the role of different imaging modalities (orthopantomogram (OPG), lateral and posteroanterior cephalometric radiographs, CT and MRI) in the diagnosis of a wide spectrum of first and second BAS, including hemifacial microsomia, mandibulofacial dysostosis, branchio-oto-renal syndrome, Pierre Robin sequence and Nager acrofacial dysostosis. Additionally, we aim to emphasize the importance of the systematic use of a multimodality imaging approach to facilitate the precise grading of these syndromes, as well as the preoperative planning of different reconstructive surgical procedures and their follow-up during treatment. (orig.)

A Modified Transpalatal Arch with Sleeve

Directory of Open Access Journals (Sweden)

Ashish Gupta

2013-01-01

Full Text Available Conventionally fabricated transpalatal arches often create deep grooves on the tongue causing discomfort to the patients. To ovecome this situation a modification has been devised which requires only a few minutes of lab time, thus enhancing patient′s compliance toward treatment.

Numerical Analysis on Temperature Rise of a Concrete Arch Dam after Sealing Based on Measured Data

Directory of Open Access Journals (Sweden)

Qingbin Li

2014-01-01

Full Text Available The thermal boundary conditions in the construction and operation phases of a concrete arch dam are always complex. After sealing, differences between the arch dam temperature and its sealing temperature can cause compressive or tensile stresses. Based on measured temperature of an arch dam located in China, a temperature rise phenomenon (TRP is found in the after-sealed regions of the arch dam. By mining and analyzing the temperature data of various monitoring apparatus embedded in the arch dam, higher environment temperature is considered to be the main cause for the occurrence of the TRP. Mathematical methods for complex thermal boundary conditions, including external boundary conditions and internal heat source conditions, are proposed in this paper. A finite element model is implemented with the concern of the construction phase and operation phase of the arch dam. Results confirm good agreement with the measured temperature and verify the conjecture that the TRP occurs mainly because the external temperature of the arch dam is higher than its sealing temperature.

Arch Venture Partners' investment considerations for CBRNE products and opportunities

Science.gov (United States)

Crandell, K.; Lazarus, S.; Gardner, P. J.

2008-04-01

ARCH is interested in building leading, highly-valued companies from leading research. Toward that end we value innovations created by the leading researchers in the world, many of which are funded to solve critical scientific challenges including those in the instrumentation and CBRNE area. The most important CBRNE innovations we have seen at ARCH are breakthroughs involving significant unaddressed technology risk and have the potential for broad proprietary intellectual property as a result. The model ARCH has evolved in instrumentation is to look for a breakthrough innovation, with strong intellectual property and continue to strengthen the patent estate through the life of the company. ARCH looks to build companies around leading interdisciplinary scientific and engineering teams, and we favor platform technology that can be applied to multiple market applications both commercial and government. As part of a strategy to build a great company, addressing important CBRNE challenges can help a company strengthen its technical team and its IP estate. This supports a focus on early low volume markets on the way toward addressing a fuller portfolio of applications. Experienced Venture Capitalists can help this process by identifying important executive talent, partners and applications, offering financial syndication strength, and helping shape the company's strategy to maximize the ultimate value realized.

The gothic arch: a reliable measurement for developmental dysplasia of the hip.

Science.gov (United States)

Herickhoff, Paul K; O'Brien, Megan K; Dolan, Lori A; Morcuende, Jose A; Peterson, Jonathan B; Weinstein, Stuart L

2013-01-01

The "Gothic Arch" is a radio-graphic finding on AP pelvis x-rays postulated to be predictive of hip osteoarthritis. The purpose of this study was to determine the reliability of measurement of the Gothic Arch in patients with no known hip pathology and patients with unilateral developmental dysplasia of the hip (DDH). After obtaining IRB approval, nine skeletally mature patients (18 hips) with no known hip pathology were selected to serve as the control group. The AP pelvis x-rays at skeletal maturity of eight patients (16 hips) with unilateral DDH treated with closed reduction and casting comprised the comparison group. A digitizing program was designed to measure the Gothic Arch based on landmarks identified by the user. Two pediatric orthopaedic surgeons and two orthopaedic residents completed the program on two separate occasions. Intra-and interobserver reliability were determined using intraclass cor-relation coefficients (ICC) for continuous variables. Both the unilateral DDH group and the control group demonstrated excellent inter- and intraobserver reliability (ICC >0.70) for base, height, area, and orientation of the Gothic Arch, but poor reliability (ICC Gothic Arch can be reliably measured on AP pelvis x-rays of patients with normal and dysplastic hips. III, Diagnostic study. See the Guidelines for Authors for a complete description of levels of evidence.

The relationships between the arrangement of teeth, root resorption, and dental maturity in bovine mandibular incisors

Science.gov (United States)

An, Jin-kyu; Ono, Takashi

2017-01-01

Objective The objective of this study is to investigate the eruption pattern and root resorption of the bovine anterior dentition in relation to growth-related parameters based on dental maturity. Methods A cross-sectional study was conducted on 110 bovine anterior mandibles by using standard radiography, cone-beam computed tomography (CBCT), and actual measurements. We determined the relationships between the stages of dental maturity by using a modification of Demirjian's method and various growth-related parameters, such as the activity of the root-resorbing tissue and mobility of the deciduous teeth. The correlation of growth-related parameters with interdental spacing and distal unusual root resorption (DRR) of the deciduous fourth incisor was assessed. The cause of mesial unusual root resorption (MRR) of the deciduous fourth incisor was determined on the basis of the arrangement of the permanent third incisor. Results An independent t-test and chi-square test indicated significant differences in growth-related parameters associated with dental arch length discrepancy and factors related to the shedding of deciduous teeth between the low and high dental maturity groups. The samples with interdental spacing and DRR showed a larger sum of mesiodistal permanent crown widths and higher dental maturity than did the respective controls. Samples with MRR tended to show a lingually rotated distal tip of the adjacent tooth crown. Conclusions Dental maturity has relevance to the interdental spaces and unusual root resorption of mixed dentition. The position of the adjacent tooth crown on CBCT may be correlated with the occurrence of unusual root resorption of the incisor. PMID:29090124

Differential distribution of the Ca (2+) regulator Pcp4 in the branchial arches is regulated by Hoxa2.

Science.gov (United States)

Anderson, Megan; Amin, Shilu; Luise, Fabiana; Zeef, Leo; Bobola, Nicoletta

2013-01-01

Branchial arches are externally visible tissue bands in the head region of all vertebrate embryos. Although initially formed from similar components, each arch will give rise to different head and neck structures. In a screen designed to characterize the molecular control of branchial arch identity in mouse, we identified Pcp4 as a second branchial arch-specific molecular signature. We further show that the transcription factor Hoxa2 binds to Pcp4 chromatin and regulates Pcp4 expression in the second arch. Hoxa2 is also sufficient to induce Pcp4 expression in anterior first arch cells, which are Pcp4-negative.

Disinfection of dental impressions - compliance to accepted standards.

Science.gov (United States)

Almortadi, N; Chadwick, R G

2010-12-18

The responsibility of ensuring impressions have been cleaned and disinfected before dispatch to the dental laboratory lies solely with the dentist. Uncertainty of impression disinfection risks both the health of the receiving dental technician and potential repeat disinfection of an already disinfected impression with detrimental consequences for its dimensions. To ascertain, from the perspectives of dentists and dental technicians, current impression decontamination and disinfection practices with, in the case of the technicians, an estimate of the relative prevalence of contaminated voids within apparently disinfected impressions. Anonymous postal questionnaire. Dentist (n = 200) and dental technician (n = 200) potential participants, selected at random from the registers held by the General Dental Council, were invited to complete an anonymous postal questionnaire that sought to establish current practices and perceived effectiveness of impression disinfection. Questionnaire return rates of 42.1% and 31.2% were recorded for dentists and dental technicians respectively. A wide range of solutions, at different dilutions of the same product, was used by the dentists to disinfect dental impressions. 37.2% rinsed the impressions with water, and 2.6% always brushed debris away, before disinfection. 24.7% of dentists did not inform the laboratory of disinfection. Irrespective of the disinfection status of the received impressions, 50% of the responding dental technicians disinfected all impressions. 95% of them had received blood-contaminated impressions. 15% had encountered blood-filled voids upon trimming back the peripheries of impressions. 64.7% were confident that the impressions received by them had been disinfected by the dentists. Compliance with good practice is less than ideal and education in impression disinfection for both dentists and dental technicians is required to address this.

Dental Management of a Patient with Nager Acrofacial Dysostosis

Directory of Open Access Journals (Sweden)

R. Bozatlıoğlu

2015-01-01

Full Text Available Nager syndrome is a rare syndrome resulting from developmental abnormalities of the first and second branchial arches. Nager syndrome is rare and mostly sporadic. The main clinical features consist of craniofacial, limb, and musculoskeletal morphogenesis. These findings included malar hypoplasia, maxillomandibular hypoplasia, micrognathia, downslanting palpebral fissures, cleft palate, ear anomalies, hypoplastic thumb, short forearm, proximal radioulnar synostosis, atrial septal defect, lower limb deformities, and flat nasal bridge. The prevalence is unknown; about 100 cases of Nager syndrome have been published up to now. Patients with Nager syndrome are found worldwide among all racial and ethnic groups. Trismus and glossoptosis resulting in oropharyngeal airway narrowing cause life-threatening respiratory distress for patients with Nager syndrome. In this case report, dental rehabilitation of a 10-year-old child with Nager syndrome is presented.

Oesophageal foreign body and a double aortic arch: rare dual pathology.

Science.gov (United States)

O'Connor, T E; Cooney, T

2009-12-01

We report the rare case of an oesophageal foreign body which lodged above the site of oesophageal compression by a double aortic arch. Case report and a review of the literature surrounding the classification, embryology, diagnosis and management of vascular rings and slings. An eight-month-old male infant presented with symptoms of tracheal compression following ingestion of an oesophageal foreign body. Following removal of the oesophageal foreign body, the infant's symptoms improved initially. However, subsequent recurrence of respiratory symptoms lead to a repeat bronchoscopy and the diagnosis of a coexisting double aortic arch, causing tracheal and oesophageal compression. To our knowledge, this is only the second reported case of a double aortic arch being diagnosed in a patient following removal of an oesophageal foreign body.

The Role of Arch Compression and Metatarsophalangeal Joint Dynamics in Modulating Plantar Fascia Strain in Running

Science.gov (United States)

McDonald, Kirsty A.; Stearne, Sarah M.; Alderson, Jacqueline A.; North, Ian; Pires, Neville J.; Rubenson, Jonas

2016-01-01

Elastic energy returned from passive-elastic structures of the lower limb is fundamental in lowering the mechanical demand on muscles during running. The purpose of this study was to investigate the two length-modulating mechanisms of the plantar fascia, namely medial longitudinal arch compression and metatarsophalangeal joint (MPJ) excursion, and to determine how these mechanisms modulate strain, and thus elastic energy storage/return of the plantar fascia during running. Eighteen runners (9 forefoot and 9 rearfoot strike) performed three treadmill running trials; unrestricted shod, shod with restricted arch compression (via an orthotic-style insert), and barefoot. Three-dimensional motion capture and ground reaction force data were used to calculate lower limb kinematics and kinetics including MPJ angles, moments, powers and work. Estimates of plantar fascia strain due to arch compression and MPJ excursion were derived using a geometric model of the arch and a subject-specific musculoskeletal model of the plantar fascia, respectively. The plantar fascia exhibited a typical elastic stretch-shortening cycle with the majority of strain generated via arch compression. This strategy was similar in fore- and rear-foot strike runners. Restricting arch compression, and hence the elastic-spring function of the arch, was not compensated for by an increase in MPJ-derived strain. In the second half of stance the plantar fascia was found to transfer energy between the MPJ (energy absorption) and the arch (energy production during recoil). This previously unreported energy transfer mechanism reduces the strain required by the plantar fascia in generating useful positive mechanical work at the arch during running. PMID:27054319

The Role of Arch Compression and Metatarsophalangeal Joint Dynamics in Modulating Plantar Fascia Strain in Running.

Directory of Open Access Journals (Sweden)

Kirsty A McDonald

Full Text Available Elastic energy returned from passive-elastic structures of the lower limb is fundamental in lowering the mechanical demand on muscles during running. The purpose of this study was to investigate the two length-modulating mechanisms of the plantar fascia, namely medial longitudinal arch compression and metatarsophalangeal joint (MPJ excursion, and to determine how these mechanisms modulate strain, and thus elastic energy storage/return of the plantar fascia during running. Eighteen runners (9 forefoot and 9 rearfoot strike performed three treadmill running trials; unrestricted shod, shod with restricted arch compression (via an orthotic-style insert, and barefoot. Three-dimensional motion capture and ground reaction force data were used to calculate lower limb kinematics and kinetics including MPJ angles, moments, powers and work. Estimates of plantar fascia strain due to arch compression and MPJ excursion were derived using a geometric model of the arch and a subject-specific musculoskeletal model of the plantar fascia, respectively. The plantar fascia exhibited a typical elastic stretch-shortening cycle with the majority of strain generated via arch compression. This strategy was similar in fore- and rear-foot strike runners. Restricting arch compression, and hence the elastic-spring function of the arch, was not compensated for by an increase in MPJ-derived strain. In the second half of stance the plantar fascia was found to transfer energy between the MPJ (energy absorption and the arch (energy production during recoil. This previously unreported energy transfer mechanism reduces the strain required by the plantar fascia in generating useful positive mechanical work at the arch during running.

The Role of Arch Compression and Metatarsophalangeal Joint Dynamics in Modulating Plantar Fascia Strain in Running.

Science.gov (United States)

McDonald, Kirsty A; Stearne, Sarah M; Alderson, Jacqueline A; North, Ian; Pires, Neville J; Rubenson, Jonas

2016-01-01

Elastic energy returned from passive-elastic structures of the lower limb is fundamental in lowering the mechanical demand on muscles during running. The purpose of this study was to investigate the two length-modulating mechanisms of the plantar fascia, namely medial longitudinal arch compression and metatarsophalangeal joint (MPJ) excursion, and to determine how these mechanisms modulate strain, and thus elastic energy storage/return of the plantar fascia during running. Eighteen runners (9 forefoot and 9 rearfoot strike) performed three treadmill running trials; unrestricted shod, shod with restricted arch compression (via an orthotic-style insert), and barefoot. Three-dimensional motion capture and ground reaction force data were used to calculate lower limb kinematics and kinetics including MPJ angles, moments, powers and work. Estimates of plantar fascia strain due to arch compression and MPJ excursion were derived using a geometric model of the arch and a subject-specific musculoskeletal model of the plantar fascia, respectively. The plantar fascia exhibited a typical elastic stretch-shortening cycle with the majority of strain generated via arch compression. This strategy was similar in fore- and rear-foot strike runners. Restricting arch compression, and hence the elastic-spring function of the arch, was not compensated for by an increase in MPJ-derived strain. In the second half of stance the plantar fascia was found to transfer energy between the MPJ (energy absorption) and the arch (energy production during recoil). This previously unreported energy transfer mechanism reduces the strain required by the plantar fascia in generating useful positive mechanical work at the arch during running.

Dental Calculus Arrest of Dental Caries.

Science.gov (United States)

Keyes, Paul H; Rams, Thomas E

An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. These observations further document the potential protective effects of dental calculus mineralization against dental caries.

Dental Calculus Arrest of Dental Caries

Science.gov (United States)

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. Materials and methods A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Results Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. Conclusions These observations further document the potential protective effects of dental calculus mineralization against dental caries. PMID:27446993

Evaluation of the pattern dimensions of cast-metal posts in uniradicular teeth

Directory of Open Access Journals (Sweden)

Rafael de Assunção Vital

Full Text Available Introduction Accurate dimensions of cast-metal posts are relevant to the survival of dental prostheses. Objective The aim of this study was to verify if the dimensions of cast-metal posts accord with ideal clinical criteria. Material and method For the evaluation, 285 periapical radiographs, from a total of 80 teeth, were taken from the charts of patients that attended the clinics at the Dental School of the Federal University of Goiás, from March 2008 to October 2012. Only periapical radiographs of single-rooted teeth with post and core were included in the study. The radiographic evaluation was conducted with the assistance of a magnifying glass and a view box, in a room with low luminosity. The dimensions of the post and core were established with the help of a digital caliper, and the following measurements were considered: a LR (Length Remnant; b LP (Length Post; c BS (Bone Support; d DR (Diameter Root; e DP (mesiodistal diameter post. The post and core were classified as acceptable or deficient by reference values with a margin of error of 0.2 mm. For descriptive analysis, the data were cataloged using SPSS software (version 17.0. Result With regard to the length of the post and core, only 26.25% and 43.75% of the post and core were classified as acceptable according to the two-thirds rule and fulcrum dental rule, respectively. With regard to the mesiodistal diameter of the post and core, 55% were classified as acceptable. Conclusion Within the limits of this study, it can be concluded that the cast-metal posts evaluated do not accord with the ideal clinical criteria.

[Thymic carcinoma involving aortic arch; report of a case].

Science.gov (United States)

Noriyuki, Toshio; Hamamoto, M; Takazawa, Y; Katoh, K; Hashimoto, M; Kuranishi, F; Nakahara, M; Fukuda, T; Ishizaki, Y; Okuda, H; Akimoto, E; Yonehara, S

2009-05-01

Adenocarcinoma of the thymus is a very rare malignant tumor. The standard treatment for advanced thymic carcinoma has not yet been established, and the prognosis is poor. We report a case of thymic carcinoma that involving the aortic arch and the innominate vein. A 78-year-old woman was admitted to our hospital complaining of hoarseness in April 2007. The computed tomography (CT) scan showed an anterior mediastinal tumor contiguous to the aortic arch and the innominate vein with swelling lymphnodes. Microspcopic examinations of specimens obtained by CT-guided needle biopsy revealed poorly differenciated adenocarcinoma. The carcinoembryonic antigen (CEA) level of serum elevated at 54.9 ng/ml. Thymic carcinoma was diagnosed. The chemoradiotherapy [concurrent, carboplatin (CBDCA) + paclitaxel(TXL)-->vinorelbine (NVB), 60 Gy] was performed, but the effect of the therapy was limited. The resection of the tumor with a part of aortic arch and other peripheral tissues was performed in Augast 2007. The postoperative course was uneventful and the CEA level of serum lowered to the normal. She was discharged 30 days after surgery.

RIGHT-SIDED AORTIC ARCH WITH ABERRANT LEFT SUBCLAVIAN ARTERY AND DUPLICATION OF SUPERIOR VENA CAVA

Directory of Open Access Journals (Sweden)

Parikhita Hazarika

2017-08-01

Full Text Available Right-sided aortic arch is a rare anatomical variant present in about 0.1% of the adult population.1,2 Half of the cases are associated with an aberrant left subclavian artery (0.05%-0.1%. Right-sided aortic arch with aberrant left subclavian artery is less common than left-sided aortic arch with aberrant right subclavian artery (0.5-2.0%.3,4 A rightsided aortic arch is an anatomic variant resulting from persistence of the right fourth aortic arch and involution of the left. It can be associated with an aberrant left subclavian artery arises from Kommerell’s diverticulum. It is usually asymptomatic and diagnosed incidentally during adult age. A 40-year-old male presented with cough and a hump in the back. The patient was evaluated for scoliosis and plain CT thorax was done.

Management of an elderly patient with respiratory failure due to double aortic arch

Directory of Open Access Journals (Sweden)

Changwan Ryu

2016-01-01

Full Text Available Vascular rings are congenital malformations of the aortic arch. A double aortic arch (DAA, the most common type of vascular ring, results from the failure of the fourth embryonic branchial arch to regress, leading to an ascending aorta that divides into a left and right arch that fuse together to completely encircle the trachea and esophagus. The subsequent DAA causes compressive effects on the trachea and esophagus that typically manifests in infancy or early childhood. Adult presentations, particularly in the elderly, are exceedingly rare. Historically such patients have a long-standing history of dyspnea on exertion and dysphagia, with many assumed to have obstructive lung or intrinsic cardiac disease. We describe a case of an elderly woman who presented with respiratory failure due to DAA. In her case, surgery was not feasible and we describe our experience with airway stenting.

Three dimensional analysis of CT image on naso-maxillary complex in cleft lip and palate patients

International Nuclear Information System (INIS)

Ma, Rong-Rong

1994-01-01

This study was designed to clarify the three dimensional features of naso-maxillary complex in cleft lip and palate (CLP) by using computed tomography (CT) and to examine its change following an upper dental arch expansion. Sequential CT images with 2mm-thickness were obtained for 11 unilateral CLP boys (UCLP), 6 bilateral CLP boys (BCLP) and 4 boys without cleft (non-cleft). Additionally, two serial sets of upper dental cast before and after dental arch expansion coupled with CT images in UCLP were used to evaluate the effect of dental arch expansion on the naso-maxillary complex. UCLP demonstrated a remarkable naso-maxillary deformity characterized by a decreased volume of maxillary sinus in comparison with the non-cleft patients. Both the volume and shape of nasal cavity were significantly different between the cleft and non cleft side. Naso-maxillary morphology of BCLP, however, was similar to that of the non cleft except for the decreased volume of alveolar arch. Comparative study of UCLP and BCLP showed a significant difference in naso-maxillary morphology. There were some significant correlations between the dental arch expansion and change of each naso-maxillary component, suggesting the effect of expansion stress on the naso-maxillary complex in UCLP. However, deformation caused by expansion stress varied, depending on each component of the naso-maxillary complex. (author) 61 refs

Three dimensional analysis of CT image on naso-maxillary complex in cleft lip and palate patients

Energy Technology Data Exchange (ETDEWEB)

Ma, Rong-Rong [Tokyo Medical and Dental Univ. (Japan). School of Dentistry

1994-12-01

This study was designed to clarify the three dimensional features of naso-maxillary complex in cleft lip and palate (CLP) by using computed tomography (CT) and to examine its change following an upper dental arch expansion. Sequential CT images with 2mm-thickness were obtained for 11 unilateral CLP boys (UCLP), 6 bilateral CLP boys (BCLP) and 4 boys without cleft (non-cleft). Additionally, two serial sets of upper dental cast before and after dental arch expansion coupled with CT images in UCLP were used to evaluate the effect of dental arch expansion on the naso-maxillary complex. UCLP demonstrated a remarkable naso-maxillary deformity characterized by a decreased volume of maxillary sinus in comparison with the non-cleft patients. Both the volume and shape of nasal cavity were significantly different between the cleft and non cleft side. Naso-maxillary morphology of BCLP, however, was similar to that of the non cleft except for the decreased volume of alveolar arch. Comparative study of UCLP and BCLP showed a significant difference in naso-maxillary morphology. There were some significant correlations between the dental arch expansion and change of each naso-maxillary component, suggesting the effect of expansion stress on the naso-maxillary complex in UCLP. However, deformation caused by expansion stress varied, depending on each component of the naso-maxillary complex. (author) 61 refs.

Stress and burnout among Swiss dental residents.

Science.gov (United States)

Divaris, Kimon; Lai, Caroline S; Polychronopoulou, Argy; Eliades, Theodore; Katsaros, Christos

2012-01-01

Stress and burnout have been well-documented in graduate medical and undergraduate dental education, but studies among dental graduate students and residents are sparse. The purpose of this investigation was to examine perceived stressors and three dimensions of burnout among dental residents enrolled in the University of Bern, Switzerland. Thirty-six residents enrolled in five specialty programmes were administered the Graduate Dental Environment Stress (GDES30) questionnaire and the Maslach Burnout Inventory (MBI). Individual stress items and overall GDES30 scores were used to quantify perceived stress. To measure burnout, proportions of burnout "cases" and MBI subscale scores were computed in the domains of emotional exhaustion (EE), depersonalization (DP) and reduced personal accomplishment (PA). Analyses relied on descriptive and bi-variate methods. The mean GDES30 score was 2.1 (SD = 0.4). "Lack of leisure time", "meeting the research requirement of the programme" and "completing graduation requirements" emerged as the top three stressors. Thirty-six percent of respondents were burnout "cases" on the PA scale, while this proportion was 17% for EE and 8% for DP. Both stress and burnout levels increased according to year of study, whereas younger residents and females had consistently higher stress and burnout scores compared to older ones and males. Overall, low levels of perceived stress and burnout were found among this group of Swiss dental residents.

The importance of the evaluation of expectations and perceptions to improve the dental service quality.

Science.gov (United States)

Rocha, Juliana; Pinto, Andres; Batista, Marilia; Paula, Janice Simpson de; Ambrosano, Glaucia

2017-07-10

Purpose The purpose of this paper is to evaluate the use of SERVQUAL to assess service quality in Dentistry, by evaluating patients' expectations and perceptions of dental care and their association to patients' sociodemographic data. Design/methodology/approach The sample constituted of 379 subjects in the first assessment and 155 in the second phase. All employees of the companies that were clients of the dental insurance participated, a total of four companies in two states (São Paulo and Minas Gerais) of Brazil. SERVQUAL questionnaires about expectations and sociodemographic data were dispatched in the first phase, and in a second phase SERVQUAL questionnaires about perceptions. Those who had not yet received dental treatment and had agreed to participate filled out their survey in the first phase. In the second phase, the respondents had to have completed their treatment. Findings When the value gap is considered, Reliability (as a dimension) had the smallest score (-3.71). This means that it was the worst result, i.e. there is a higher difference between expectations and perceptions, and problems can be identified here. t-test confirmed that all the dimensions had some statistically significant difference with p<0.05 in relation to expectations and perceptions. Women presented higher prevalence of dissatisfaction (Tangible and Reliability dimensions), as well as the oldest participants (Empathy dimension) and those with lower parental literacy (Assurance and Empathy dimensions). The only dimension that was not significantly associated was Responsiveness. Originality/value This research suggests that the patients evaluated the physical characteristics of the premises and the interaction with the staff as the priority issues that need special attention in this service. Moreover, the use of SERVQUAL was extremely relevant for the oral health service, because it assessed the users' subjective perceptions.

Bovine aortic arch and idiopathic pulmonary artery aneurysm associated with bronchial compression

Directory of Open Access Journals (Sweden)

Süleyman Sezai Yıldız

2015-09-01

Full Text Available The left common carotid artery originating from the brachiocephalic trunk is termed the bovine aortic arch. Although it is the third most-common normal variant found in 9% humans, the origin of this term remains unclear. Until now, It has not been reported in the literature bovine aortic arch togetherness with pulmonary aneurysm and bronchial compression. Herein, we present a case with bovine aorta arch and pulmonary artery aneurysm associated with bronchial compression, which is incidentally detected by X-ray film. A 56-year-old Caucasian female admitted to the cardiology clinic with complaint of chest pain. Physical examination was unremarkable. Blood biochemistry values and cardiac markers were in normal range. Chest radiography revealed a widened mediastinum and prominent pulmonary conus with no active pulmonary disease. A subsequent transthoracic echocardiography revealed left ventricular hypertrophy, left atrial enlargement (diameter: 41 mm, mild mitral and tricuspid valve insufficiency, dilatation of main pulmonary artery (parasternal short-axis view diameter: 33 mm, normal pulmonary artery pressure and normal left ventricular systolic function. Computed tomography revealed bovine aortic arch associated with pulmonary artery aneurysm (diameter: 53 mm. And left main bronch of trachea was critically squeezed by aortic arch. Aortic and pulmonary vascular anomalies should be considered in patients with chest pain. And, identification with imaging modalities is important for prevention of chronic and irreversible complications.

Nonlinear Dynamics of Electrostatically Actuated MEMS Arches

KAUST Repository

Al Hennawi, Qais M.

2015-01-01

In this thesis, we present theoretical and experimental investigation into the nonlinear statics and dynamics of clamped-clamped in-plane MEMS arches when excited by an electrostatic force. Theoretically, we first solve the equation of motion using

Examination of jaws and teeth using Dental CT

International Nuclear Information System (INIS)

Nikolov, Vl.

2001-01-01

The aim of the present work was to establish a new method for dental imaging using Dental CT. Dental computer assisted tomography represents valuable addition to the diagnostics spectrum for planning oral and maxillofacial surgery. High resolution spiral CT and specially designed computer software allow representation of the jaws in different planes that are easy to match. The further allow the display of very small structures relevant to oral surgical interventions and reveal their spatial relationship in three dimensions. Dental CT is indicated, when clinical and conventional radiological techniques will not allow exact interpretation of the situation. It is modern oral implantology that primarily benefits from computer software enabling the assessment of surgical sites in the pre surgical phase. Such planning was not yet possible using two dimensional radiographic techniques. The dental-implantological part expects from radiography sharply defined contours of the external bony contours and the mandibular canal, exactly defined relation between slices and planes, no distortion in the ortho-radial planes, tools for reliable measurements of distances, angles and volumes, possibility to transmit pictures electronically or on hardcopy without loss of quality. Thus communication between dentists and radiologists may and must be intensified and supported by usage of modern telecommunication systems. (author)

Case series: Endoscopic management of fourth branchial arch anomalies.

Science.gov (United States)

Watson, G J; Nichani, J R; Rothera, M P; Bruce, I A

2013-05-01

Fourth branchial arch anomalies represent branchial anomalies and present as recurrent neck infections or suppurative thyroiditis. Traditionally, management has consisted of treatment of the acute infection followed by hemithyroidectomy, surgical excision of the tract and obliteration of the opening in the pyriform fossa. Recently, it has been suggested that endoscopic obliteration of the sinus tract alone using laser, chemo or electrocautery is a viable alternative to open surgery. To determine the results of endoscopic obliteration of fourth branchial arch fistulae in children in our institute. Retrospective case note review of all children undergoing endoscopic treatment of fourth branchial arch anomalies in the last 7 years at the Royal Manchester Children's Hospital. Patient demographics, presenting symptoms, investigations and surgical technique were analysed. The primary and secondary outcome measures were resolution of recurrent infections and incidence of surgical complications, respectively. In total 5 cases were identified (4 females and 1 male) aged between 3 and 12 years. All presented with recurrent left sided neck abscesses. All children underwent a diagnostic laryngo-tracheo-bronchoscopy which identified a sinus in the apex of the left pyriform fossa. This was obliterated using electrocautery in 1 patient, CO₂ laser/Silver Nitrate chemocautery in 2 patients and Silver Nitrate chemocautery in a further 2 patients. There were no complications and no recurrences over a mean follow-up period of 25 months (range 11-41 months). Endoscopic obliteration of pyriform fossa sinus is a safe method for treating fourth branchial arch anomalies with no recurrence. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Complex atheromatosis of the aortic arch in cerebral infarction.

Science.gov (United States)

Capmany, Ramón Pujadas; Ibañez, Montserrat Oliveras; Pesquer, Xavier Jané

2010-08-01

In many stroke patients it is not possible to establish the etiology of stroke. However, in the last two decades, the use of transesophageal echocardiography in patients with stroke of uncertain etiology reveals atherosclerotic plaques in the aortic arch, which often protrude into the lumen and have mobile components in a high percentage of cases. Several autopsy series and retrospective studies of cases and controls have shown an association between aortic arch atheroma and arterial embolism, which was later confirmed by prospectively designed studies. The association with ischemic stroke was particularly strong when atheromas were located proximal to the ostium of the left subclavian artery, when the plaque was ≥ 4 mm thick and particularly when mobile components are present. In these cases, aspirin might not prevent adequately new arterial ischemic events especially stroke. Here we review the evidence of aortic arch atheroma as an independent risk factor for stroke and arterial embolism, including clinical and pathological data on atherosclerosis of the thoracic aorta as an embolic source. In addition, the impact of complex plaques (≥ 4 mm thick, or with mobile components) on increasing the risk of stroke is also reviewed. In non-randomized retrospective studies anticoagulation was superior to antiplatelet therapy in patients with stroke and aortic arch plaques with mobile components. In a retrospective case-control study, statins significantly reduced the relative risk of new vascular events. However, given the limited data available and its retrospective nature, randomized prospective studies are needed to establish the optimal secondary prevention therapeutic regimens in these high risk patients.

Persistent truncus arteriosis associated with interruption of the aortic arch.

Science.gov (United States)

Nath, P H; Zollikofer, C; Castaneda-Zuniga, W; Formanek, A; Amplatz, K

1980-09-01

Five patients with a combination of truncus arteriosus and interruption of the aortic arch are reported. The combination of those defects significantly increases the surgical risk. This rare cardiac malformation can only be diagnosed radiographically. An aberrant right subclavian artery is present in 25% of patients. It is helpful in suspecting the diagnosis from plain films of the chest. The diagnosis can be made from a ventriculogram, but usually a truncogram is necessary to define the anatomy of the aortic arch.

Fixed orthodontic appliances in the management of severe dental trauma in mixed dentition: a case report.

Science.gov (United States)

Ebrahim, Fouad-Hassan; Kulkarni, Gajanan

2013-01-01

We describe a case of complex trauma to the early mixed dentition in which tooth avulsion, intrusion, extrusion and lateral luxation were managed effectively using a fixed, non-rigid orthodontic splint after treatment with a traditional wire-composite splint had failed. The use of orthodontic brackets and flexible wires provided several advantages, such as the ability to splint severely malpositioned teeth; easy assessment without removing the splint; slow, gentle repositioning of traumatized teeth; and gradual reestablishment of the arch form allowing for ease of future prosthodontic rehabilitation. Therefore, orthodontic appliances should be considered as a viable option for managing complex dental trauma.

Construction Simulation Analysis of 60m-span Concrete Filled Steel Tube arch bridge

Science.gov (United States)

Shi, Jing Xian; Ding, Qing Hua

2018-06-01

The construction process of the CFST arch bridge is complicated. The construction process not only affects the structural stress in the installation, but also determines the form a bridge and internal force of the bridge. In this paper, a 60m span concrete filled steel tube tied arch bridge is taken as the background, and a three-dimensional finite element simulation model is established by using the MIDAS/Civil bridge structure analysis software. The elevation of the main arch ring, the beam stress, the forces in hanger rods and the modal frequency of the main arch during the construction stage are calculated, and the construction process is simulated and analyzed. Effectively and reasonably guide the construction and ensure that the line and force conditions of the completed bridge meet the design requirements and provides a reliable technical guarantee for the safe construction of the bridge.

Tunable Clamped–Guided Arch Resonators Using Electrostatically Induced Axial Loads

KAUST Repository

Alcheikh, Nouha; Ramini, Abdallah; Hafiz, Md Abdullah Al; Younis, Mohammad I.

2017-01-01

We present a simulation and experimental investigation of bi-directional tunable in-plane clamped-guided arch microbeam resonators. Tensile and compressive axial forces are generated from a bi-directional electrostatic actuator, which modulates the microbeam stiffness, and hence changes its natural frequency to lower or higher values from its as-fabricated value. Several devices of various anchor designs and geometries are fabricated. We found that for the fabricated shallow arches, the effect of the curvature of the arch is less important compared to the induced axial stress from the axial load. We have shown that the first mode resonance frequency can be increased up to twice its initial value. Additionally, the third mode resonance frequency can be increased up to 30% of its initial value. These results can be promising as a proof-of-concept for the realization of wide-range tunable microresonators. The experimental results have been compared to finite-element simulations, showing good agreement among them.

Modeling and forecasting crude oil markets using ARCH-type models

International Nuclear Information System (INIS)

Cheong, Chin Wen

2009-01-01

This study investigates the time-varying volatility of two major crude oil markets, the West Texas Intermediate (WTI) and Europe Brent. A flexible autoregressive conditional heteroskedasticity (ARCH) model is used to take into account the stylized volatility facts such as clustering volatility, asymmetric news impact and long memory volatility among others. The empirical results indicate that the intensity of long-persistence volatility in the WTI is greater than in the Brent. It is also found that for the WTI, the appreciation and depreciation shocks of the WTI have similar impact on the resulting volatility. However, a leverage effect is found in Brent. Although both the estimation and diagnostic evaluations are in favor of an asymmetric long memory ARCH model, only the WTI models provide superior in the out-of-sample forecasts. On the other hand, from the empirical out-of-sample forecasts, it appears that the simplest parsimonious generalized ARCH provides the best forecasted evaluations for the Brent crude oil data.

Modeling and forecasting crude oil markets using ARCH-type models

Energy Technology Data Exchange (ETDEWEB)

Cheong, Chin Wen [Research Centre of Mathematical Sciences, Faculty of Information Technology, Multimedia University, 63100 Cyberjaya, Selangor (Malaysia)

2009-06-15

This study investigates the time-varying volatility of two major crude oil markets, the West Texas Intermediate (WTI) and Europe Brent. A flexible autoregressive conditional heteroskedasticity (ARCH) model is used to take into account the stylized volatility facts such as clustering volatility, asymmetric news impact and long memory volatility among others. The empirical results indicate that the intensity of long-persistence volatility in the WTI is greater than in the Brent. It is also found that for the WTI, the appreciation and depreciation shocks of the WTI have similar impact on the resulting volatility. However, a leverage effect is found in Brent. Although both the estimation and diagnostic evaluations are in favor of an asymmetric long memory ARCH model, only the WTI models provide superior in the out-of-sample forecasts. On the other hand, from the empirical out-of-sample forecasts, it appears that the simplest parsimonious generalized ARCH provides the best forecasted evaluations for the Brent crude oil data. (author)

Tunable Clamped–Guided Arch Resonators Using Electrostatically Induced Axial Loads

KAUST Repository

Alcheikh, Nouha

2017-01-04

We present a simulation and experimental investigation of bi-directional tunable in-plane clamped-guided arch microbeam resonators. Tensile and compressive axial forces are generated from a bi-directional electrostatic actuator, which modulates the microbeam stiffness, and hence changes its natural frequency to lower or higher values from its as-fabricated value. Several devices of various anchor designs and geometries are fabricated. We found that for the fabricated shallow arches, the effect of the curvature of the arch is less important compared to the induced axial stress from the axial load. We have shown that the first mode resonance frequency can be increased up to twice its initial value. Additionally, the third mode resonance frequency can be increased up to 30% of its initial value. These results can be promising as a proof-of-concept for the realization of wide-range tunable microresonators. The experimental results have been compared to finite-element simulations, showing good agreement among them.

Anatomic variations of the branches of the aortic arch in a Peruvian population.

Science.gov (United States)

Huapaya, Julio Arturo; Chávez-Trujillo, Kristhy; Trelles, Miguel; Dueñas Carbajal, Roy; Ferrandiz Espadin, Renato

2015-07-31

Previous publications from two countries in South America found one anatomical variation not previously reported in the rest of the world, which in turn give some clues with regard to a racial difference. The objective of the present study is to describe variations in the anatomical distribution of the branches of the aortic arch in a Peruvian population. To describe variations in the anatomical distribution of the branches of the aortic arch in a Peruvian population. A descriptive study of patients who underwent a tomography angiography of the aorta was performed. We analyzed the reports that showed the description of the variations of the branches of the aortic arch based on the eight types currently described in the literature. From 361 analyzed reports, 282 patients (78.12%) had a normal aortic arch configuration (type I; aortic arch gives rise to the brachiocephalic trunk, left common carotid and left subclavian arteries); followed by type II (left common carotid artery as a branch of the aorta) with 41 patients (11.36%); and type IX (common ostium for the brachiocephalic trunk and the left common carotid artery) with 25 patients (6.93%). The latter and two other types are new variations. Aortic Arch Type I, Type II and Type IX were the most frequent variations in this Peruvian study. Additionally, we also found two more new types that have not been previously described in the literature. Further investigation regarding these variations is needed in order to assess a racial factor in South America and possible relationships with clinical or surgical events.

Desenvolvimento e comparação de um método de construção de arcos ortodônticos individualizados com um método tradicional de escolha de arcos ortodônticos pré-fabricados Development and comparison of a individualized orthodontic arches construction method and a traditional method for choosing pre-manufactured orthodontic arches

Directory of Open Access Journals (Sweden)

Antonio José Borin Neto

2009-04-01

Full Text Available INTRODUÇÃO: a existência de pacientes com arcos dentários e anatomias diferentes dos diagramas de arcos ortodônticos preestabelecidos justifica este trabalho. OBJETIVO: foi proposto mostrar um método de construção de arcos ortodônticos que respeitasse a anatomia individual de cada paciente e que fosse construído sem a necessidade de diagramas impressos pré-desenhados. MÉTODOS: em vinte modelos inferiores de gesso, foram colados, no centro da coroa clínica dos seus dentes, braquetes e tubos. Com o auxílio de um paquímetro digital associado a um aparelho que posicionou os modelos com o plano oclusal paralelo ao solo, foi possível medir a distância da ponta de cúspide e meio da face incisal de cada dente até o fundo da canaleta do respectivo braquete e tubo colado. De posse dessas medidas, foram realizadas impressões das cúspides dentárias dos modelos em uma lâmina de cera 7 e, a partir dessas cúspides, pontuou-se a cera usando a distância obtida (entre a ponta de cúspide/meio da incisal dos dentes e a canaleta do braquete/entrada do tubo. Esses novos pontos serviram de referência para a construção dos arcos ortodônticos individualizados. RESULTADOS E CONCLUSÃO: esse método de construção foi denominado "arcograma", o qual foi comparado com um método pré-conformado de diagramação ("Tru-arch", sendo considerado melhor que esse no tocante à adaptação à anatomia individual do arco.INTRODUCTION: The existence of exceptional anatomic dental arches justifies this work. AIM: It was proposed to show a orthodontic arches construction method that follow the individual anatomy of each patient, developed without any previous constructed diagram. METHODS: Braces or molar tubes were bonded on 20 inferior natural cast models. With the aid of a digital paquimeter associated to an apparatus that positioned the occlusal planes parallel to the floor, the distance between the cuspid tip and the center of the slot of the brace

Holocephalan embryos provide evidence for gill arch appendage reduction and opercular evolution in cartilaginous fishes

Science.gov (United States)

Gillis, J. Andrew; Rawlinson, Kate A.; Bell, Justin; Lyon, Warrick S.; Baker, Clare V. H.; Shubin, Neil H.

2011-01-01

Chondrichthyans possess endoskeletal appendages called branchial rays that extend laterally from their hyoid and gill-bearing (branchial) arches. Branchial ray outgrowth, like tetrapod limb outgrowth, is maintained by Sonic hedgehog (Shh) signaling. In limbs, distal endoskeletal elements fail to form in the absence of normal Shh signaling, whereas shortened duration of Shh expression correlates with distal endoskeletal reduction in naturally variable populations. Chondrichthyans also exhibit natural variation with respect to branchial ray distribution—elasmobranchs (sharks and batoids) possess a series of ray-supported septa on their hyoid and gill arches, whereas holocephalans (chimaeras) possess a single hyoid arch ray-supported operculum. Here we show that the elongate hyoid rays of the holocephalan Callorhinchus milii grow in association with sustained Shh expression within an opercular epithelial fold, whereas Shh is only transiently expressed in the gill arches. Coincident with this transient Shh expression, branchial ray outgrowth is initiated in C. milii but is not maintained, yielding previously unrecognized vestigial gill arch branchial rays. This is in contrast to the condition seen in sharks, where sustained Shh expression corresponds to the presence of fully formed branchial rays on the hyoid and gill arches. Considered in light of current hypotheses of chondrichthyan phylogeny, our data suggest that the holocephalan operculum evolved in concert with gill arch appendage reduction by attenuation of Shh-mediated branchial ray outgrowth, and that chondrichthyan branchial rays and tetrapod limbs exhibit parallel developmental mechanisms of evolutionary reduction. PMID:21220324

ANALYSIS OF FACTORS CAUSING WATER DAMAGE TO LOESS DOUBLE-ARCHED TUNNEL BASED ON TFN-AHP

Directory of Open Access Journals (Sweden)

Mao Zheng-jun

2017-04-01

Full Text Available In order to analysis the factors causing water damage to loess double-arched tunnel, this paper conducts field investigation on water damage to tunnels on Lishi-Jundu Expressway in Shanxi, China, confirms its development characteristics, builds an index system (covering 36 evaluation indexes for construction condition, design stage, construction stage, and operation stage for the factors causing water damage to loess double-arched tunnel, applies TFN-AHP (triangular fuzzy number-analytic hierarchy process in calculating the weight of indexes at different levels, and obtains the final sequence of weight of the factors causing water seepage to loess double-arched tunnel. It is found out that water damage to loess double-arched tunnel always develops in construction joints, expansion joints, settlement joints, and lining joints of tunnel and even around them; there is dotted water seepage, linear water seepage, and planar water seepage according to the trace and scope of water damage to tunnel lining. The result shows that water damage to loess double-arched tunnel mainly refers to linear water seepage, planar water seepage is also developed well, and partition and equipment box at the entrance and exit of tunnel are prone to water seepage; construction stage is crucial for controlling water damage to loess double-arched tunnel, atmospheric precipitation is the main water source, and the structure defect of double-arched tunnel increases the possibility of water seepage; the final sequence for weight of various factors is similar to the actual result.

Damage identification on spatial Timoshenko arches by means of genetic algorithms

Science.gov (United States)

Greco, A.; D'Urso, D.; Cannizzaro, F.; Pluchino, A.

2018-05-01

In this paper a procedure for the dynamic identification of damage in spatial Timoshenko arches is presented. The proposed approach is based on the calculation of an arbitrary number of exact eigen-properties of a damaged spatial arch by means of the Wittrick and Williams algorithm. The proposed damage model considers a reduction of the volume in a part of the arch, and is therefore suitable, differently than what is commonly proposed in the main part of the dedicated literature, not only for concentrated cracks but also for diffused damaged zones which may involve a loss of mass. Different damage scenarios can be taken into account with variable location, intensity and extension of the damage as well as number of damaged segments. An optimization procedure, aiming at identifying which damage configuration minimizes the difference between its eigen-properties and a set of measured modal quantities for the structure, is implemented making use of genetic algorithms. In this context, an initial random population of chromosomes, representing different damage distributions along the arch, is forced to evolve towards the fittest solution. Several applications with different, single or multiple, damaged zones and boundary conditions confirm the validity and the applicability of the proposed procedure even in presence of instrumental errors on the measured data.

The effect of minimal shoes on arch structure and intrinsic foot muscle strength

Directory of Open Access Journals (Sweden)

Elizabeth E. Miller

2014-06-01

Conclusion: These results suggest that endurance running in minimal support footwear with 4 mm offset or less makes greater use of the spring-like function of the longitudinal arch, thus leading to greater demands on the intrinsic muscles that support the arch, thereby strengthening the foot.

Direct 3-D morphological measurements of silicone rubber impression using micro-focus X-ray CT.

Science.gov (United States)

Kamegawa, Masayuki; Nakamura, Masayuki; Fukui, Yu; Tsutsumi, Sadami; Hojo, Masaki

2010-01-01

Three-dimensional computer models of dental arches play a significant role in prosthetic dentistry. The microfocus X-ray CT scanner has the advantage of capturing precise 3D shapes of deep fossa, and we propose a new method of measuring the three-dimensional morphology of a dental impression directly, which will eliminate the conversion process to dental casts. Measurement precision and accuracy were evaluated using a standard gage comprised of steel balls which simulate the dental arch. Measurement accuracy, standard deviation of distance distribution of superimposed models, was determined as +/-0.050 mm in comparison with a CAD model. Impressions and casts of an actual dental arch were scanned by microfocus X-ray CT and three-dimensional models were compared. The impression model had finer morphology, especially around the cervical margins of teeth. Within the limitations of the current study, direct three-dimensional impression modeling was successfully demonstrated using microfocus X-ray CT.

Value and limitations of chimney grafts to treat arch lesions.

Science.gov (United States)

Mangialardi, N; Ronchey, S; Malaj, A; Fazzini, S; Alberti, V; Ardita, V; Orrico, M; Lachat, M

2015-08-01

The endovascular debranching with chimney stents provides a minimally invasive alternative to open surgery with readily available devices and has extended the option of endoluminal therapy into the realm of the aortic arch. But a critical observation at the use of this technique at the aortic arch is important and necessary because of the lack of long-term results and long term patency of the stents. Our study aims to review the results of chimney grafts to treat arch lesions. A systematic health database search was performed in December 2014 according to the Prisma Guidelines. Papers were sought through a meticulous search of the MEDLINE database (National Library of Medicine, Bethesda, MA) using the Pubmed search engine. Twenty-two articles were eligible for detailed analysis and data extraction. A total of 182 patients underwent chimney techniques during TEVAR (Thoracic Endovascular Aneurysm Repair). A total of 217 chimney grafts were implanted: 36 to the IA, 1 to the RCCA, 91 to the LCCA and 89 to the LSA. The type of stent-graft used for TEVAR was described in 132 patients. The type and name of chimney graft was described in 126 patients. In 53 patients information was limited to the type. Primary technical success, defined as a complete chimney procedure was achieved in 171 patients (98%). In 8 patients it was not clearly reported. The overall stroke rate was 5.3%. The overall endoleak rate, in those papers were it was clearly reported, was 18.4% (31 patients); 23(13,6%) patients developed a type IA endoleak, 1 patient (0.6%) developed type IB endoleak and 7 patients (4.1%) developed a type II endoleak The total endovascular aortic arch debranching technique represent a good option to treat high-risk patients, because it dramatically reduces the aggressiveness of the procedure in the arch. Many concerns are still present, mainly related to durability and material interaction during time. Long-term follow-up is exceptionally important in light of the

3D MODELLING OF PROPHYLACTIC FOOTWEAR FOR A HIGH ARCHED FOOT

OpenAIRE

COSTEA Mariana; MIHAI Aura

2016-01-01

This article approaches the methodology of designing customized footwear for high arched foot. The authors propose to reconsider the classical structure of footwear bottom components for people with high arched foot and recommend incorporating custom components, with the role of compensation or adjustment. This study continues the authors’ research, starting from a foot’s 3D shape obtained by 3D scanning, the anthropometrical and biomechanical parameters, shoe lasts’ 3D modelling and continui...

3-dimensional orthodontics visualization system with dental study models and orthopantomograms

Science.gov (United States)

Zhang, Hua; Ong, S. H.; Foong, K. W. C.; Dhar, T.

2005-04-01

The aim of this study is to develop a system that provides 3-dimensional visualization of orthodontic treatments. Dental plaster models and corresponding orthopantomogram (dental panoramic tomogram) are first digitized and fed into the system. A semi-auto segmentation technique is applied to the plaster models to detect the dental arches, tooth interstices and gum margins, which are used to extract individual crown models. 3-dimensional representation of roots, generated by deforming generic tooth models with orthopantomogram using radial basis functions, is attached to corresponding crowns to enable visualization of complete teeth. An optional algorithm to close the gaps between deformed roots and actual crowns by using multi-quadratic radial basis functions is also presented, which is capable of generating smooth mesh representation of complete 3-dimensional teeth. User interface is carefully designed to achieve a flexible system with as much user friendliness as possible. Manual calibration and correction is possible throughout the data processing steps to compensate occasional misbehaviors of automatic procedures. By allowing the users to move and re-arrange individual teeth (with their roots) on a full dentition, this orthodontic visualization system provides an easy and accurate way of simulation and planning of orthodontic treatment. Its capability of presenting 3-dimensional root information with only study models and orthopantomogram is especially useful for patients who do not undergo CT scanning, which is not a routine procedure in most orthodontic cases.

Ex vivo imaging of early dental caries within the interproximal space

Science.gov (United States)

Choo-Smith, Lin-P'ing; Hewko, Mark D.; Dufour, Marc L.; Fulton, Crystal; Qiu, Pingli; Gauthier, Bruno; Padioleau, Christian; Bisaillon, Charles-Etienne; Dong, Cecilia; Cleghorn, Blaine M.; Lamouche, Guy; Sowa, Michael G.

2009-02-01

Optical coherence tomography (OCT) is emerging as a technology that can potentially be used for the detection and monitoring of early dental enamel caries since it can provide high-resolution depth imaging of early lesions. To date, most caries detection optical technologies are well suited for examining caries at facial, lingual, incisal and occlusal surfaces. The approximal surfaces between adjacent teeth are difficult to examine due to lack of visual access and limited space for these new caries detection tools. Using a catheter-style probe developed at the NRC-Industrial Materials Institute, the probe was inserted into the interproximal space to examine the approximal surfaces with OCT imaging at 1310 nm. The probe was rotated continuously and translated axially to generate depth images in a spiral fashion. The probe was used in a mock tooth arch model consisting of extracted human teeth mounted with dental rope wax in their anatomically correct positions. With this ex vivo model, the probe provided images of the approximal surfaces revealing morphological structural details, regions of calculus, and especially regions of early dental caries (white spot lesions). Results were compared with those obtained from OCT imaging of individual samples where the approximal surfaces of extracted teeth are accessible on a lab-bench. Issues regarding access, regions of interest, and factors to be considered in an in vivo setting will be discussed. Future studies are aimed at using the probe in vivo with patient volunteers.

Post-flare coronal arches observed with the SMM/XRP flat crystal spectrometer

Science.gov (United States)

Hick, Paul; Svestka, Zdenek; Smith, Kermit L.; Strong, Keith T.

1987-01-01

Postflare coronal arch observations made with the SMM Flat Crystal Spectrometer on January 20-23, 1985 are discussed. Results suggest that the arch revival following the dynamic flare of 23:50 UT on January 1 was of the type noted on November 6-8 and June 4, 1980 by the SMM Hard X-ray Imaging Spectrometer (HXIS). Activity different from that of the HXIS observations was found starting at about 23 UT on January 22, with no trigger of the revival being identified, and with the activity being restricted to the coronal regions (without any related disturbance in the chromosphere). The development of the arch enhancement in the corona was shown to be slower than is expected for a flare-associated revival.

Surface characterization of nickel titanium orthodontic arch wires

Science.gov (United States)

Krishnan, Manu; Seema, Saraswathy; Tiwari, Brijesh; Sharma, Himanshu S.; Londhe, Sanjay; Arora, Vimal

2015-01-01

Background Surface roughness of nickel titanium orthodontic arch wires poses several clinical challenges. Surface modification with aesthetic/metallic/non metallic materials is therefore a recent innovation, with clinical efficacy yet to be comprehensively evaluated. Methods One conventional and five types of surface modified nickel titanium arch wires were surface characterized with scanning electron microscopy, energy dispersive analysis, Raman spectroscopy, Atomic force microscopy and 3D profilometry. Root mean square roughness values were analyzed by one way analysis of variance and post hoc Duncan's multiple range tests. Results Study groups demonstrated considerable reduction in roughness values from conventional in a material specific pattern: Group I; conventional (578.56 nm) > Group V; Teflon (365.33 nm) > Group III; nitride (301.51 nm) > Group VI (i); rhodium (290.64 nm) > Group VI (ii); silver (252.22 nm) > Group IV; titanium (229.51 nm) > Group II; resin (158.60 nm). It also showed the defects with aesthetic (resin/Teflon) and nitride surfaces and smooth topography achieved with metals; titanium/silver/rhodium. Conclusions Resin, Teflon, titanium, silver, rhodium and nitrides were effective in decreasing surface roughness of nickel titanium arch wires albeit; certain flaws. Findings have clinical implications, considering their potential in lessening biofilm adhesion, reducing friction, improving corrosion resistance and preventing nickel leach and allergic reactions. PMID:26843749

In vivo biofilm formation on different dental ceramics.

Science.gov (United States)

Bremer, Felicia; Grade, Sebastian; Kohorst, Philipp; Stiesch, Meike

2011-01-01

To investigate the formation of oral biofilm on various dental ceramics in vivo. Five different ceramic materials were included: a veneering glass- ceramic, a lithium disilicate glass-ceramic, a yttrium-stabilized zirconia (Y-TZP), a hot isostatically pressed (HIP) Y-TZP ceramic, and an HIP Y-TZP ceramic with 25% alumina. Test specimens were attached to individually designed acrylic appliances; five volunteers wore these appliances for 24 hours in the maxillary arch. After intraoral exposure, the samples were removed from the appliances and the adhering biofilms vitally stained. Then, the two-dimensional surface coating and thickness of the adhering biofilm were determined by confocal laser scanning microscopy. Statistical analysis was performed using one-way ANOVA with the level of significance set at .05. Significant differences (P ceramic materials. The lowest surface coating (19.0%) and biofilm thickness (1.9 Μm) were determined on the HIP Y-TZP ceramic; the highest mean values were identified with the lithium disilicate glass-ceramic (46.8%, 12.6 Μm). Biofilm formation on various types of dental ceramics differed significantly; in particular, zirconia exhibited low plaque accumulation. In addition to its high strength, low plaque accumulation makes zirconia a promising material for various indications (including implant abutments and telescopic crowns) that previously were met only with metal-based materials.

Ethnicity and perception of dental shade esthetics.

Science.gov (United States)

Niaz, Muhammad Omar; Naseem, Mustafa; Elcock, Claire

2015-01-01

To determine whether or not people from different ethnic backgrounds have different attitudes towards dental esthetics and chose different dental appearances in terms of tooth shade, and to determine whether the dental professional's choice and the individual's own choice have any relationship with what the individual ideally perceives as esthetically pleasing. For this cross-sectional analytical study, 120 volunteer students from the University of Sheffield (excepting dental students) from various ethnic backgrounds, of different ages, of both genders, and with varying degree/educational levels were recruited from the campus. The volunteers were asked to complete a questionnaire containing 9 adapted attitudinal statements regarding positive or negative dental esthetic perceptions in terms of tooth shade, with responses on a 5-point Likert scale from "Entirely agree" to "Entirely disagree". Scores for all attitudinal statements were summed up to give an attitudinal score. The participants' ideal, perceived, and actual (self-assessed and investigatorassessed) tooth shade was also determined using a shade guide and a facial mirror. No association between ethnicity and attitudinal score was found. However, statistically significant associations were found between the participants' degree/educational level (P=0.004, 95% Confidence Interval (CI)=-4.18 to -0.82) and their ideal tooth shade value (P=0.038, 95% CI=-3.53 to -0.11). There were strong correlations between self-assessed and professionally assessed tooth shade value in all ethnic groups, with Spearman's rank correlation coefficient (rho) being ρ>0.6. Regarding ideally desired and perceived tooth shade value, weak correlations were found in all ethnic groups (Spearman's rho being ρethnicity and attitude towards dental esthetics with regard to tooth shade, both ethnicity and dental esthetics are very diverse terms with multiple dimensions, each of which needs further investigation with regard to their mutual

Comparison of two non-radiographic techniques of mixed dentition space analysis and evaluation of their reliability for Bengali population.

Science.gov (United States)

Dasgupta, Barun; Zahir, Shabnam

2012-09-01

Mixed dentition arch analysis system is an important criterion in determining the type of orthodontic treatment plan. Different mixed dentition arch analysis system are available and among them both Moyer's and Tanaka-Jhonson method of space analysis was developed for North American children. Anthropological study reveals that tooth size varies among different ethnicities The present study was performed to determine the reliability of Moyer's and Tanaka-Jhonson's method of mixed dentition arch analysis system among Bengali population. To perform the comparative evaluation of the two mixed dentition space analysis system among Bengali population. Dental casts of maxillary and mandibular arches of 70 Bengali children with permanent dentitions were fabricated. The mesiodistal crown dimensions of all erupted permanent incisors, canines, and premolars were measured with digital callipers. For particular sum of mandibular incisors, Moyer's and Tanaka-Jhonson's mixed dentition arch analysis were calculated and further statistical analysis was carried on. Descriptive statistics including the mean, standard deviation, and minimum and maximum values, unpaired't' tests, correlation coefficient "r" were calculated and tabulated. Tanaka and Johnston regression equations under-estimated the mesiodistal widths of permanent canines and premolars. On the other hand, there were no statistically significant differences between actual mesiodistal widths of canines and premolars and the predicted widths from Moyers charts at the 50% level for the lower and upper arches, among Bengali population. The study suggested that both Moyer's and Tanaka-Jhonson's mixed dentition arch analysis are applicable in Bengali population but with little modification in their regression equation.

The relationship between the quality of education and the poor dental practice: Clinical case report

Directory of Open Access Journals (Sweden)

Cléa Adas Saliba Garbin

2013-01-01

Full Text Available The activities developed in health area are of great importance, because they have the aim to preserve the life of the men, and therefore, must be performed by authorized persons. The increase of the number of dental schools, the decline at the education quality and a higher admission of students with low ability to exercise their profession, are facts that bring disastrous consequences for society. These facts are, also, reflected at the moral, ethical and technical-scientific performance of the professional. The purpose of this clinic case is to show that although there is a significant suplly of education institutions, there is a lack of scientific and adequate technical knowledgement from the graduated dentals surgeons. The patient MSL, 17 year old, female, went to a dental clinic presenting a tray type Vernis, attached to the lower arch. After clinical evaluation, it was showed that an incorrect material was used for the impression technique, being impossible to take out the tray by the conventional mann r. The planning for the removal of the tray was through the divide of it. Thus, the consequence of the lack of knowledge in the use of impression materials had caused a great incovinience to the patient. It can be concluded that the rate of malpractice is directly related to the professional preparation, highlighting the importance of quality dental education for a responsible clinical practice.

A flap based on the plantar digital artery arch branch to improve appearance of reconstructed fingers: Anatomical and clinical application.

Science.gov (United States)

Tang, Lin-Feng; Ju, Ji-Hui; Liu, Yue-Fei; Lan, Bo; Hou, Rui-Xing

2018-02-01

To investigate blood supply features of the flap based on the plantar digital artery arch and arch branch artery, and the treatment of outcomes of reconstructed fingers by the plantar digital artery arch branch island flap. Eight fresh foot specimens were employed with red emulsion infusion and microdissection. The vascular organization was observed in the second toe, such as initiation site, the course, and the number of the plantar digital artery arch branch. There were 15 fingers of 13 patients (8 males and 5 females) with finger defects accompanied by toe transfer, using the plantar digital artery arch branch flap inserted in the neck of the second toe to correct the appearance defect caused by a narrow "neck" and a bulbous tip. The intact plantar digital arches were identified in all specimens. The plantar digital artery arch had 5 branches. The range of external diameter of the arch branch was 0.4-0.6 mm. All the plantar digital artery arch branch island flaps and the reconstructed fingers survived. These cases were conducted with a follow-up period for 3-18 months (average, 9 months). All the plantar digital artery arch branch island flaps and reconstructed fingers demonstrated a satisfactory appearance and favorable sense function. The reconstructed finger-tip characteristic was good, with no obvious scar hyperplasia. The range of flexion and extension of reconstructed fingers was favorable as well. The plantar digital artery arch and arch branch artery possess regular vasa vasorum and abundant vascularity. A flap based on the plantar digital artery arch branch is an ideal selection for plastic surgery of reconstructed fingers. Copyright © 2017 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Dental Calculus Arrest of Dental Caries

OpenAIRE

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human t...

Indication for dental computed tomography. Case reports

International Nuclear Information System (INIS)

Schom, C.; Engelke, W.; Kopka, L.; Fischer, U.; Grabbe, E.

1996-01-01

Based on case reports, common indications for dental computed tomography are demonstrated and typical findings are analysed. From a group of 110 patients who had a reformatted computed tomography of the maxilla and mandibula, 10 typical cases were chosen as examples and are presented with a detailed description of the findings. The most important indication was the analysis of the morphology of the alveolar ridge needed in presurgical planning for osseointegrated implants as well as in special cases of postsurgical control. Apart from implantology, the method could be used in cases of mandibular cysts and bony destructions. In conclusion, dental computed tomography has become established mainly in implantology. It can provide valuable results in cases where a demonstration of the bone in all dimensions and free of overlappings and distortions is needed. (orig.) [de

Laser welding by dental Nd:YAG device

Science.gov (United States)

Fornaini, Carlo; Bertrand, Caroline; Merigo, Elisabetta; Bonanini, Mauro; Rocca, Jean-Paul; Nammour, Samir

2009-06-01

Welding laser was introduced in jewellery during years 70 and, just after, was successfully used also by dental technicians. Welding laser gives a great number of advantages, versus traditional welding and, for this reason, this procedure had a great diffusion in the technician laboratories and stimulated the companies to put in the market more and more evolutes appliances. Some aspects, such great dimensions, high costs and delivery system today still characterize these machines by fixed lenses, which have strictly limited its use only to technician laboratories. The aim of this study is to demonstrate the possibility, by using a fibber-delivered laser normally utilized in the dental office, to make, by dentist himself in his office, welding on different metals and to evaluate advantages and possibilities of this new technique.

Uncertainty Instability Risk Analysis of High Concrete Arch Dam Abutments

Directory of Open Access Journals (Sweden)

Xin Cao

2017-01-01

Full Text Available The uncertainties associated with concrete arch dams rise with the increased height of dams. Given the uncertainties associated with influencing factors, the stability of high arch dam abutments as a fuzzy random event was studied. In addition, given the randomness and fuzziness of calculation parameters as well as the failure criterion, hazard point and hazard surface uncertainty instability risk ratio models were proposed for high arch dam abutments on the basis of credibility theory. The uncertainty instability failure criterion was derived through the analysis of the progressive instability failure process on the basis of Shannon’s entropy theory. The uncertainties associated with influencing factors were quantized by probability or possibility distribution assignments. Gaussian random theory was used to generate random realizations for influence factors with spatial variability. The uncertainty stability analysis method was proposed by combining the finite element analysis and the limit equilibrium method. The instability risk ratio was calculated using the Monte Carlo simulation method and fuzzy random postprocessing. Results corroborate that the modeling approach is sound and that the calculation method is feasible.

Classification of the height and flexibility of the medial longitudinal arch of the foot.

Science.gov (United States)

Nilsson, Mette Kjærgaard; Friis, Rikke; Michaelsen, Maria Skjoldahl; Jakobsen, Patrick Abildgaard; Nielsen, Rasmus Oestergaard

2012-02-17

The risk of developing injuries during standing work may vary between persons with different foot types. High arched and low arched feet, as well as rigid and flexible feet, are considered to have different injury profiles, while those with normal arches may sustain fewer injuries. However, the cut-off values for maximum values (subtalar position during weight-bearing) and range of motion (ROM) values (difference between subtalar neutral and subtalar resting position in a weight-bearing condition) for the medial longitudinal arch (MLA) are largely unknown. The purpose of this study was to identify cut-off values for maximum values and ROM of the MLA of the foot during static tests and to identify factors influencing foot posture. The participants consisted of 254 volunteers from Central and Northern Denmark (198 m/56 f; age 39.0 ± 11.7 years; BMI 27.3 ± 4.7 kg/m2). Navicular height (NH), longitudinal arch angle (LAA) and Feiss line (FL) were measured for either the left or the right foot in a subtalar neutral position and subtalar resting position. Maximum values and ROM were calculated for each test. The 95% and 68% prediction intervals were used as cut-off limits. Multiple regression analysis was used to detect influencing factors on foot posture. The 68% cut-off values for maximum MLA values and MLA ROM for NH were 3.6 to 5.5 cm and 0.6 to 1.8 cm, respectively, without taking into account the influence of other variables. Normal maximum LAA values were between 131 and 152° and normal LAA ROM was between -1 and 13°. Normal maximum FL values were between -2.6 and -1.2 cm and normal FL ROM was between -0.1 and 0.9 cm. Results from the multivariate linear regression revealed an association between foot size with FL, LAA, and navicular drop. The cut-off values presented in this study can be used to categorize people performing standing work into groups of different foot arch types. The results of this study are important for investigating a possible link between

Classification of the height and flexibility of the medial longitudinal arch of the foot

Directory of Open Access Journals (Sweden)

Nilsson Mette

2012-02-01

Full Text Available Abstract Background The risk of developing injuries during standing work may vary between persons with different foot types. High arched and low arched feet, as well as rigid and flexible feet, are considered to have different injury profiles, while those with normal arches may sustain fewer injuries. However, the cut-off values for maximum values (subtalar position during weight-bearing and range of motion (ROM values (difference between subtalar neutral and subtalar resting position in a weight-bearing condition for the medial longitudinal arch (MLA are largely unknown. The purpose of this study was to identify cut-off values for maximum values and ROM of the MLA of the foot during static tests and to identify factors influencing foot posture. Methods The participants consisted of 254 volunteers from Central and Northern Denmark (198 m/56 f; age 39.0 ± 11.7 years; BMI 27.3 ± 4.7 kg/m2. Navicular height (NH, longitudinal arch angle (LAA and Feiss line (FL were measured for either the left or the right foot in a subtalar neutral position and subtalar resting position. Maximum values and ROM were calculated for each test. The 95% and 68% prediction intervals were used as cut-off limits. Multiple regression analysis was used to detect influencing factors on foot posture. Results The 68% cut-off values for maximum MLA values and MLA ROM for NH were 3.6 to 5.5 cm and 0.6 to 1.8 cm, respectively, without taking into account the influence of other variables. Normal maximum LAA values were between 131 and 152° and normal LAA ROM was between -1 and 13°. Normal maximum FL values were between -2.6 and -1.2 cm and normal FL ROM was between -0.1 and 0.9 cm. Results from the multivariate linear regression revealed an association between foot size with FL, LAA, and navicular drop. Conclusions The cut-off values presented in this study can be used to categorize people performing standing work into groups of different foot arch types. The results of this

Experiences of dental care: what do patients value?

Directory of Open Access Journals (Sweden)

Sbaraini Alexandra

2012-06-01

Full Text Available Abstract Background Dentistry in Australia combines business and health care service, that is, the majority of patients pay money for tangible dental procedures such as fluoride applications, dental radiographs, dental fillings, crowns, and dentures among others. There is evidence that patients question dentists’ behaviours and attitudes during a dental visit when those highly technical procedures are performed. However, little is known about how patients’ experience dental care as a whole. This paper illustrates the findings from a qualitative study recently undertaken in general dental practice in Australia. It focuses on patients’ experiences of dental care, particularly on the relationship between patients and dentists during the provision of preventive care and advice in general dental practices. Methods Seventeen patients were interviewed. Data analysis consisted of transcript coding, detailed memo writing, and data interpretation. Results Patients described their experiences when visiting dental practices with and without a structured preventive approach in place, together with the historical, biological, financial, psychosocial and habitual dimensions of their experience. Potential barriers that could hinder preventive activities as well as facilitators for prevention were also described. The offer of preventive dental care and advice was an amazing revelation for this group of patients as they realized that dentists could practice dentistry without having to “drill and fill” their teeth. All patients, regardless of the practice they came from or their level of clinical risk of developing dental caries, valued having a caring dentist who respected them and listened to their concerns without “blaming” them for their oral health status. These patients complied with and supported the preventive care options because they were being “treated as a person not as a patient” by their dentists. Patients valued dentists who made

Cracking Behavior of a Concrete Arch Dam with Weak Upper Abutment

Directory of Open Access Journals (Sweden)

Lei Xu

2017-01-01

Full Text Available The cracking behavior and failure mode of a 78 m high concrete double-curvature arch dam with weak upper abutment are investigated through performing cracking analysis. The mechanical behavior of concrete is simulated using a smeared crack model, in which a combination of the compression yield surface and the crack detection surface with a damaged elasticity concept is employed to describe the failure of concrete. The arch dam with practical mechanical properties of the upper and lower abutments is firstly studied with emphasis on its cracking behavior during overloading. Then, a comprehensive sensitivity analysis is carried out to investigate the influence of the ratio of the mechanical properties of upper abutment to those of lower abutment on dam failure with prime attention placed on the failure mode. Simulation results indicate the adopted smeared crack model is well-suited to the crack analysis of concrete arch dam. It is shown that cracking is localized around the interface between upper and lower abutments, which leads to a fast crack growth in the through-thickness direction of dam and finally causes the dam failure. Furthermore, the sensitivity analysis presents three types of failure modes corresponding to different ratio value, wherein Modes II and III should be avoided since the weak upper abutment plays a predominant role in the cracking and failure of concrete arch dam.

Simultaneous functional and fixed appliance therapy for growth modification and dental alignment prior to prosthetic habilitation in hypohidrotic ectodermal dysplasia: a clinical report.

Science.gov (United States)

Suri, Sunjay; Carmichael, Robert P; Tompson, Bryan D

2004-11-01

This clinical report describes the simultaneous use of functional and fixed appliances to modify the pattern of dentofacial development and align teeth in preparation for prosthodontic habilitation of a growing child with hypohidrotic ectodermal dysplasia. The treatment objective was to create a more favorable starting point for the prosthodontic phase of habilitation by improving the sagittal and vertical skeletal relationships and facial esthetics. This was accomplished through growth modification with functional appliances conducted simultaneously with eruption of maxillary and mandibular molars, dental arch expansion, alignment, and space management using fixed orthodontic appliances. Orthodontic retention was accomplished by means of removable partial dentures. A second phase of orthodontics conducted closer to the age of skeletal maturation will aim at definitive tooth alignment in preparation for dental implant-supported restorations.