Neurotoxicity of dental amalgam is mediated by zinc.

Science.gov (United States)

Lobner, D; Asrari, M

2003-03-01

The use of dental amalgam is controversial largely because it contains mercury. We tested whether amalgam caused toxicity in neuronal cultures and whether that toxicity was caused by mercury. In this study, we used cortical cell cultures to show for the first time that amalgam causes nerve cell toxicity in culture. However, the toxicity was not blocked by the mercury chelator, 2,3-dimercaptopropane-1-sulphonate (DMPS), but was blocked by the metal chelator, calcium disodium ethylenediaminetetraacetate (CaEDTA). DMPS was an effective mercury chelator in this system, since it blocked mercury toxicity. Of the components that comprise amalgam (mercury, zinc, tin, copper, and silver), only zinc neurotoxicity was blocked by CaEDTA. These results indicate that amalgam is toxic to nerve cells in culture by releasing zinc. While zinc is known to be neurotoxic, ingestion of zinc is not a major concern because zinc levels in the body are tightly regulated.

Dental Amalgam

Science.gov (United States)

... Products and Medical Procedures Dental Devices Dental Amalgam Dental Amalgam Share Tweet Linkedin Pin it More sharing options Linkedin Pin it Email Print Dental amalgam is a dental filling material which is ...

Influence of the temperature, volume and type of solution in the mercury vaporization of dental amalgam residue

Energy Technology Data Exchange (ETDEWEB)

Costa, Raquel dalla [Department of Chemical Engineering, State University of Maringa, Maringa - PR (Brazil)], E-mail: raqueldc_eng@yahoo.com.br; Cossich, Eneida Sala; Tavares, Celia Regina Granhen [Department of Chemical Engineering, State University of Maringa, Maringa - PR (Brazil)

2008-12-15

One of the qualitative methods for the identification of mercury vapor is what it occurs as a way of chemical reaction between palladium chloride and metallic mercury. Palladium chloride ribbons with yellowish coloration put in contact with the vaporized mercury of dental amalgam residue, liberates palladium and forms mercury chloride in your surface, and starts to have black coloration; this form identify the presence of the mercury vapor in the system. This work studies the influence of temperature, volume and type of barrier-solution in the vaporization of mercury during the period of storage of dental amalgam residues, aiming to establish the best conditions for storage of these residues. It was found that for all tested solutions, the longest storage times without any occurrence of mercury vaporization were obtained in the lowest temperatures tested and the largest solution volumes of barrier-solution. The radiographic effluent presented bigger efficacy in the reduction of the volatilization, increasing the period when the residue was stored, however the analysis of this solution after the vaporization test showed the presence of organic mercury. These results show that water is the most efficient barrier against the vaporization of mercury, since it did not result in organic mercury formation in the effluent solution from the storage process.

Influence of the temperature, volume and type of solution in the mercury vaporization of dental amalgam residue

International Nuclear Information System (INIS)

Costa, Raquel dalla; Cossich, Eneida Sala; Tavares, Celia Regina Granhen

2008-01-01

One of the qualitative methods for the identification of mercury vapor is what it occurs as a way of chemical reaction between palladium chloride and metallic mercury. Palladium chloride ribbons with yellowish coloration put in contact with the vaporized mercury of dental amalgam residue, liberates palladium and forms mercury chloride in your surface, and starts to have black coloration; this form identify the presence of the mercury vapor in the system. This work studies the influence of temperature, volume and type of barrier-solution in the vaporization of mercury during the period of storage of dental amalgam residues, aiming to establish the best conditions for storage of these residues. It was found that for all tested solutions, the longest storage times without any occurrence of mercury vaporization were obtained in the lowest temperatures tested and the largest solution volumes of barrier-solution. The radiographic effluent presented bigger efficacy in the reduction of the volatilization, increasing the period when the residue was stored, however the analysis of this solution after the vaporization test showed the presence of organic mercury. These results show that water is the most efficient barrier against the vaporization of mercury, since it did not result in organic mercury formation in the effluent solution from the storage process

A dose-effect analysis of children's exposure to dental amalgam and neuropsychological function: the New England Children's Amalgam Trial.

Science.gov (United States)

Bellinger, David C; Trachtenberg, Felicia; Daniel, David; Zhang, Annie; Tavares, Mary A; McKinlay, Sonja

2007-09-01

The New England Children's Amalgam Trial (NECAT) was a five-year randomized trial of 534 6- to 10-year-old children that compared the neuropsychological outcomes of those whose caries were restored using dental amalgam with the outcomes of those those whose caries were restored using mercury-free resin-based composite. The primary intention-to-treat analyses did not reveal significant differences between the treatment groups on the primary or secondary outcomes of the administered psychological tests: Full-Scale IQ score on the Wechsler Intelligence Scale for Children-Third Edition, General Memory Index of the Wide Range Assessment of Memory and Learning, and Visual-Motor Composite of the Wide Range Assessment of Visual Motor Abilities. To determine whether treatment group assignment, a dichotomous measure of exposure, was sufficiently sensitive to detect associations between mercury exposure and these outcomes, the authors conducted analyses to evaluate the associations between the primary and secondary outcomes and two continuously distributed indexes of potential exposure, surface-years of amalgam and urinary mercury excretion. Neither index of mercury exposure was significantly associated with any of the three outcomes. The authors found no evidence that exposure to mercury from dental amalgam was associated with any adverse neuropsychological effects over the five-year period after placement of amalgam restorations. Analyses of the outcomes of the NECAT study indicate that use of dental amalgam was not associated with an increase in children's risk of experiencing neuropsychological dysfunction.

Estimated quantity of mercury in amalgam waste water residue released by dentists into the sewerage system in Ontario, Canada.

Science.gov (United States)

Adegbembo, Albert O; Watson, Philip A

2004-12-01

To estimate the quantity of dental amalgam that Ontario dentists release into waste water. Information from a self-administered postal survey of Ontario dentists was combined with the results of other experiments on the weight of amalgam restorations and the quantity of amalgam waste that bypasses solids separators in dental offices. Algorithms were developed to compute the quantity of amalgam waste leaving dental offices when dentists used or did not use ISO 11143 amalgam particle separators. A total of 878 (44.0%) of 1,994 sampled dentists responded to the survey. It was estimated that Ontario dentists removed 1,880.32 kg of amalgam (940.16 kg of mercury) during 2002, of which 1,128.19 kg of amalgam (564.10 kg of mercury) would have been released into waste water in Ontario if no dentists had been using a separator. Approximately 22% of the dentists reported using amalgam particle separators. On the basis of current use of amalgam separators, it was estimated that 861.78 kg of amalgam (430.89 kg of mercury or 170.72 mg per dentist daily) was released in 2002. The use of amalgam separators by all dentists could reduce the quantity of amalgam (and mercury) entering waste water to an estimated 12.41 kg (6.21 kg of mercury, or 2.46 mg per dentist per day). Amalgam particles separators can dramatically reduce amalgam and mercury loading in waste water released from dental offices.

About Dental Amalgam Fillings

Science.gov (United States)

... and Medical Procedures Dental Devices Dental Amalgam About Dental Amalgam Fillings Share Tweet Linkedin Pin it More ... should I have my fillings removed? What is dental amalgam? Dental amalgam is a dental filling material ...

Mercury concentration in maternal serum, cord blood, and placenta in patients with amalgam dental fillings: effects on fetal biometric measurements.

Science.gov (United States)

Bedir Findik, Rahime; Celik, Huseyin Tugrul; Ersoy, Ali Ozgur; Tasci, Yasemin; Moraloglu, Ozlem; Karakaya, Jale

2016-11-01

We aimed to determine the extent to which mercury is transmitted from the mother to fetus via the umbilical cord in patients with amalgam dental fillings, and its effect on fetal biometric measurements. Twenty-eight patients as the study group with amalgam fillings, and 32 of them as the control group were included in this prospective case-control study. The mercury levels were measured in the maternal and cord venous sera, and the placental samples. Two groups were compared in terms of these and the fetal/neonatal biometric measurements. In the study group, the maternal and umbilical cord mercury levels were found to be significantly higher than those from the control group (p = 0.006 and p = 0.010, respectively). These high levels did not affect the fetal biometric measurements. The presence of high serum mercury levels in pregnant women with amalgam fillings is important, and warrants further long-term studies in order to investigate the fetal neurological effects as well.

Mercury Amalgam Diffusion in Human Teeth Probed Using Femtosecond LIBS.

Science.gov (United States)

Bello, Liciane Toledo; da Ana, Patricia Aparecida; Santos, Dário; Krug, Francisco José; Zezell, Denise Maria; Vieira, Nilson Dias; Samad, Ricardo Elgul

2017-04-01

In this work the diffusion of mercury and other elements from amalgam tooth restorations through the surrounding dental tissue (dentin) was evaluated using femtosecond laser-induced breakdown spectroscopy (fs-LIBS). To achieve this, seven deciduous and eight permanent extracted human molar teeth with occlusal amalgam restorations were half-sectioned and analyzed using pulses from a femtosecond laser. The measurements were performed from the amalgam restoration along the amalgam/dentin interface to the apical direction. It was possible to observe the presence of metallic elements (silver, mercury, copper and tin) emission lines, as well as dental constituent ones, providing fingerprints of each material and comparable data for checking the consistence of the results. It was also shown that the elements penetration depth values in each tooth are usually similar and consistent, for both deciduous and permanent teeth, indicating that all the metals diffuse into the dentin by the same mechanism. We propose that this diffusion mechanism is mainly through liquid dragging inside the dentin tubules. The mercury diffused further in permanent teeth than in deciduous teeth, probably due to the longer diffusion times due to the age of the restorations. It was possible to conclude that the proposed femtosecond-LIBS system can detect the presence of metals in the dental tissue, among the tooth constituent elements, and map the distribution of endogenous and exogenous chemical elements, with a spatial resolution that can be brought under 100 µm.

Prenatal exposure to dental amalgam: evidence from the Seychelles Child Development Study main cohort.

Science.gov (United States)

Watson, Gene E; Lynch, Miranda; Myers, Gary J; Shamlaye, Conrad F; Thurston, Sally W; Zareba, Grazyna; Clarkson, Thomas W; Davidson, Philip W

2011-11-01

Dental amalgams contain approximately 50 percent metallic mercury and emit mercury vapor during the life of the restoration. Controversy surrounds whether fetal exposure to mercury vapor resulting from maternal dental amalgam restorations has neurodevelopmental consequences. The authors determined maternal amalgam restoration status during gestation (prenatal exposure to mercury vapor [Hg(0)]) retrospectively in 587 mother-child pairs enrolled in the Seychelles Child Development Study, a prospective longitudinal cohort study of the effects of prenatal and recent postnatal methylmercury (MeHg) exposure on neurodevelopment. They examined covariate-adjusted associations between prenatal maternal amalgam restoration status and the results of six age-appropriate neurodevelopmental tests administered at age 66 months. The authors fit the models without and with adjustment for prenatal and recent postnatal MeHg exposure metrics. The mean number of maternal amalgam restorations present during gestation was 5.1 surfaces (range, 1-22) in the 42.4 percent of mothers who had amalgam restorations. The authors found no significant adverse associations between the number of amalgam surfaces present during gestation and any of the six outcomes, with or without adjustment for prenatal and postnatal MeHg exposure. Results of analyses with the secondary metric, prenatal amalgam occlusal point scores, showed an adverse association in boys only on a letter- and word-identification subtest of a frequently used test of scholastic achievement, whereas girls scored better on several other tests with increasing exposure. This study's results provide no support for the hypothesis that prenatal Hg(0) exposure arising from maternal dental amalgam restorations results in neurobehavioral consequences in the child. These findings require confirmation from a prospective study of coexposure to MeHg and Hg(0).

Maternal-fetal distribution of mercury (203Hg) released from dental amalgam fillings

International Nuclear Information System (INIS)

Vimy, M.J.; Takahashi, Y.; Lorscheider, F.L.

1990-01-01

In humans, the continuous release of Hg vapor from dental amalgam tooth restorations is markedly increased for prolonged periods after chewing. The present study establishes a time-course distribution for amalgam Hg in body tissues of adult and fetal sheep. Under general anesthesia, five pregnant ewes had twelve occlusal amalgam fillings containing radioactive 203Hg placed in teeth at 112 days gestation. Blood, amniotic fluid, feces, and urine specimens were collected at 1- to 3-day intervals for 16 days. From days 16-140 after amalgam placement (16-41 days for fetal lambs), tissue specimens were analyzed for radioactivity, and total Hg concentrations were calculated. Results demonstrate that Hg from dental amalgam will appear in maternal and fetal blood and amniotic fluid within 2 days after placement of amalgam tooth restorations. Excretion of some of this Hg will also commence within 2 days. All tissues examined displayed Hg accumulation. Highest concentrations of Hg from amalgam in the adult occurred in kidney and liver, whereas in the fetus the highest amalgam Hg concentrations appeared in liver and pituitary gland. The placenta progressively concentrated Hg as gestation advanced to term, and milk concentration of amalgam Hg postpartum provides a potential source of Hg exposure to the newborn. It is concluded that accumulation of amalgam Hg progresses in maternal and fetal tissues to a steady state with advancing gestation and is maintained. Dental amalgam usage as a tooth restorative material in pregnant women and children should be reconsidered

Conditioning of spent mercury by amalgamation

International Nuclear Information System (INIS)

Yim, S. P.; Shon, J. S.; An, B. G.; Lee, H. J.; Lee, J. W.; Ji, C. G.; Kim, S. H.; Yoon, J. H.; Yang, M. S.

2002-01-01

Solidification by amalgamation was performed to immobilize and stabilize the liquid spent mercury. First, the appropriate metal and alloy which can convert liquid mercury into a solid form of amalgam were selected through initial tests. The amalgam form, formulated in optimum composition, was characterized and subjected to performance tests including compressive strength, water immersion, leachability and initial vaporization rate to evaluate mechanical integrity, durability and leaching properties. Finally, bench scale amalgamation trial was conducted with about 1 kg of spent mercury to verify the feasibility of amalgamation method

Blood Mercury Level and Its Determinants among Dental Practitioners in Hamadan, Iran

Directory of Open Access Journals (Sweden)

M. Vahedi

2010-06-01

Full Text Available Objective: Exposure to mercury can occur in occupational and environmental settings.During clinical work with dental amalgam, the dental personnel are exposed to both metallic mercury and mercury vapor. The aim of the present study was to investigate bloodmercury level (BML and its determinants among dentists practicing in Hamadan city,Iran.Materials and Methods: This cross sectional study was done on all dental practitioners of Hamadan (n=43. Dentists were asked to complete a questionnaire, and then 5 ml bloodsamples were obtained from them. After preparation, mercury concentration of each sample was measured by cold vapor atomic absorption device. Pearson correlation test and regression models served for statistical analysis.Results: The mean blood concentration of mercury was 6.3 μg/l (SD=1.31 range 4.15-8.93. BML was positively associated with age, years in practice, working hours per day,number of amalgam restorations per day, number of amalgam removal per week, sea foodconsumption, working years in present office, using amalgam powder, using diamond bur for amalgam removal, dry sterilization of amalgam contaminated instruments, and deficient air ventilation.Conclusion: BML of dentists in Hamadan was higher than standards. Working hours and number of amalgam restorations per day were significantly correlated with blood mercury.

Mercury content in amalgam tattoos of human oral mucosa and its relation to local tissue reactions

Energy Technology Data Exchange (ETDEWEB)

Forsell, M.; Larsson, B.; Ljungqvist, A.; Carlmark, B.; Johansson, O

1998-02-01

Mucosal biopsies from 48 patients with and 9 without amalgam tattoos were analysed with respect to their mercury content, distribution of mercury in the tissue, and histological tissue reactions. The distribution of mercury was assessed by auto-metallography (AMG), a silver amplification technique. The mercury content was determined by energy dispersive X-ray fluorescence (EDXRF), a multielemental analysis. Mercury was observed in connective tissue where it was confined to fibroblasts and macrophages, in vessel walls and in structures with the histological character of nerve fibres. A correlation was found between the histopathological tissue reaction, the type of mercury deposition, the intensity of the AMG reaction, and the mercury content. Mercury was also found in patients with amalgam dental fittings but without amalgam tattoos. (au) 24 refs.

Mercury content in amalgam tattoos of human oral mucosa and its relation to local tissue reactions

International Nuclear Information System (INIS)

Forsell, M.; Larsson, B.; Ljungqvist, A.; Carlmark, B.; Johansson, O.

1998-01-01

Mucosal biopsies from 48 patients with and 9 without amalgam tattoos were analysed with respect to their mercury content, distribution of mercury in the tissue, and histological tissue reactions. The distribution of mercury was assessed by auto-metallography (AMG), a silver amplification technique. The mercury content was determined by energy dispersive X-ray fluorescence (EDXRF), a multielemental analysis. Mercury was observed in connective tissue where it was confined to fibroblasts and macrophages, in vessel walls and in structures with the histological character of nerve fibres. A correlation was found between the histopathological tissue reaction, the type of mercury deposition, the intensity of the AMG reaction, and the mercury content. Mercury was also found in patients with amalgam dental fittings but without amalgam tattoos. (au)

Increased Release of Mercury from Dental Amalgam Fillings due to Maternal Exposure to Electromagnetic Fields as a Possible Mechanism for the High Rates of Autism in the Offspring: Introducing a Hypothesis

Directory of Open Access Journals (Sweden)

Mortazavi Gh.

2016-03-01

Full Text Available According to the World Health Organization (WHO, factors such as growing electricity demand, ever-advancing technologies and changes in social behaviour have led to steadily increasing exposure to man-made electromagnetic fields. Dental amalgam fillings are among the major sources of exposure to elemental mercury vapour in the general population. Although it was previously believed that low levels are mercury (i.g. release of mercury from dental amalgam is not hazardous, now numerous data indicate that even very low doses of mercury cause toxicity. There are some evidence indicating that perinatal exposure to mercury is significantly associated with an increased risk of developmental disorders such as autism spectrum disorders (ASD and attention-deficit hyperactivity disorder (ADHD. Furthermore, mercury can decrease the levels of neurotransmitters dopamine, serotonin, noreprenephrine, and acetylcholine in the brain and cause neurological problems. On the other hand, a strong positive correlation between maternal and cord blood mercury levels is found in some studies. We have previously shown that exposure to MRI or microwave radiation emitted by common mobile phones can lead to increased release of mercury from dental amalgam fillings. Moreover, when we investigated the effects of MRI machines with stronger magnetic fields, our previous findings were confirmed. As a strong association between exposure to electromagnetic fields and mercury level has been found in our previous studies, our findings can lead us to this conclusion that maternal exposure to electromagnetic fields in mothers with dental amalgam fillings may cause elevated levels of mercury and trigger the increase in autism rates. Further studies are needed to have a better understanding of the possible role of the increased mercury level after exposure to electromagnetic fields and the rate of autism spectrum disorders in the offspring.

Maternal-fetal distribution of mercury ( sup 203 Hg) released from dental amalgam fillings

Energy Technology Data Exchange (ETDEWEB)

Vimy, M.J.; Takahashi, Y.; Lorscheider, F.L. (Univ. of Calgary, Alberta (Canada))

1990-04-01

In humans, the continuous release of Hg vapor from dental amalgam tooth restorations is markedly increased for prolonged periods after chewing. The present study establishes a time-course distribution for amalgam Hg in body tissues of adult and fetal sheep. Under general anesthesia, five pregnant ewes had twelve occlusal amalgam fillings containing radioactive 203Hg placed in teeth at 112 days gestation. Blood, amniotic fluid, feces, and urine specimens were collected at 1- to 3-day intervals for 16 days. From days 16-140 after amalgam placement (16-41 days for fetal lambs), tissue specimens were analyzed for radioactivity, and total Hg concentrations were calculated. Results demonstrate that Hg from dental amalgam will appear in maternal and fetal blood and amniotic fluid within 2 days after placement of amalgam tooth restorations. Excretion of some of this Hg will also commence within 2 days. All tissues examined displayed Hg accumulation. Highest concentrations of Hg from amalgam in the adult occurred in kidney and liver, whereas in the fetus the highest amalgam Hg concentrations appeared in liver and pituitary gland. The placenta progressively concentrated Hg as gestation advanced to term, and milk concentration of amalgam Hg postpartum provides a potential source of Hg exposure to the newborn. It is concluded that accumulation of amalgam Hg progresses in maternal and fetal tissues to a steady state with advancing gestation and is maintained. Dental amalgam usage as a tooth restorative material in pregnant women and children should be reconsidered.

Evaluation of dental amalgam mercury in human body by nuclear techniques

International Nuclear Information System (INIS)

Khddour, S.S.

2000-01-01

The levels of mercury in blood and hair samples of different groups of population belong to the same geographical areas have been investigated using neutron activation technique. The level of mercury in the blood samples ranged between 1.021 - 81.64 mg/l, while that in the hair samples ranged between 0.17 - 3.95 mg/l. T-test analysis showed higher levels of Hg in blood and hair of group having amalgam restorations comparing to other groups. This study also showed high correlation between the concentration of mercury in the blood of treated and untreated mothers and their newborn babies, where the correlation factors were 0.66 and 0.49 respectively. Correlation between the levels of Hg and Se in the blood was week. It can undoubtedly be concluded that amalgam restorations will contribute in increasing the level of mercury in blood, but although these levels exceed the maximum permissible limit in some samples, there were no any clinical side effects noticed. these levels also remained below the poisoning level.(Author)

Prenatal exposure to dental amalgam in the Seychelles Child Development Nutrition Study: associations with neurodevelopmental outcomes at 9 and 30 months.

Science.gov (United States)

Watson, Gene E; Evans, Katie; Thurston, Sally W; van Wijngaarden, Edwin; Wallace, Julie M W; McSorley, Emeir M; Bonham, Maxine P; Mulhern, Maria S; McAfee, Alison J; Davidson, Philip W; Shamlaye, Conrad F; Strain, J J; Love, Tanzy; Zareba, Grazyna; Myers, Gary J

2012-12-01

Dental amalgam is approximately 50% metallic mercury and releases mercury vapor into the oral cavity, where it is inhaled and absorbed. Maternal amalgams expose the developing fetus to mercury vapor. Mercury vapor can be toxic, but uncertainty remains whether prenatal amalgam exposure is associated with neurodevelopmental consequences in offspring. To determine if prenatal mercury vapor exposure from maternal dental amalgam is associated with adverse effects to cognition and development in children. We prospectively determined dental amalgam status in a cohort of 300 pregnant women recruited in 2001 in the Republic of Seychelles to study the risks and benefits of fish consumption. The primary exposure measure was maternal amalgam surfaces present during gestation. Maternal occlusal points were a secondary measure. Outcomes were the child's mental (MDI) and psychomotor (PDI) developmental indices of the Bayley Scales of Infant Development-II (BSID-II) administered at 9 and 30 months. Complete exposure, outcome, and covariate data were available on a subset of 242 mother-child pairs. The number of amalgam surfaces was not significantly (p>0.05) associated with either PDI or MDI scores. Similarly, secondary analysis with occlusal points showed no effect on the PDI or MDI scores for boys and girls combined. However, secondary analysis of the 9-month MDI was suggestive of an adverse association present only in girls. We found no evidence of an association between our primary exposure metric, amalgam surfaces, and neurodevelopmental endpoints. Secondary analyses using occlusal points supported these findings, but suggested the possibility of an adverse association with the MDI for girls at 9 months. Given the continued widespread use of dental amalgam, we believe additional prospective studies to clarify this issue are a priority. Copyright © 2012 Elsevier Inc. All rights reserved.

Effect of radiofrequency radiation from Wi-Fi devices on mercury release from amalgam restorations.

Science.gov (United States)

Paknahad, Maryam; Mortazavi, S M J; Shahidi, Shoaleh; Mortazavi, Ghazal; Haghani, Masoud

2016-01-01

Dental amalgam is composed of approximately 50% elemental mercury. Despite concerns over the toxicity of mercury, amalgam is still the most widely used restorative material. Wi-Fi is a rapidly using local area wireless computer networking technology. To the best of our knowledge, this is the first study that evaluates the effect of exposure to Wi-Fi signals on mercury release from amalgam restorations. Standard class V cavities were prepared on the buccal surfaces of 20 non-carious extracted human premolars. The teeth were randomly divided into 2 groups (n = 10). The control group was stored in non-environment. The specimens in the experimental groups were exposed to a radiofrequency radiation emitted from standard Wi Fi devices at 2.4 GHz for 20 min. The distance between the Wi-Fi router and samples was 30 cm and the router was exchanging data with a laptop computer that was placed 20 m away from the router. The concentration of mercury in the artificial saliva in the groups was evaluated by using a cold-vapor atomic absorption Mercury Analyzer System. The independent t test was used to evaluate any significant differences in mercury release between the two groups. The mean (±SD) concentration of mercury in the artificial saliva of the Wi-Fi exposed teeth samples was 0.056 ± .025 mg/L, while it was only 0.026 ± .008 mg/L in the non-exposed control samples. This difference was statistically significant (P =0.009). Exposure of patients with amalgam restorations to radiofrequency radiation emitted from conventional Wi-Fi devices can increase mercury release from amalgam restorations.

Impact of exposure to low levels of mercury on the health of dental workers

Directory of Open Access Journals (Sweden)

Leda Freitas Jesus

2016-09-01

Full Text Available This work evaluated the impact of exposure to mercury on the health of workers comparing dentists and dental assistants exposed to mercury by handling amalgam in a public dental clinic with a reference group which, in private offices, did not make use of the metal in their professional routine. Data collection included mercury levels in urine and air samples determined by cold vapor atomic absorption spectrometry, questionnaires and direct observation. The difference between urine and air samples in both groups was statistically significant while mercury levels in air and urine showed positive associations. Mercury concentration in urine correlated with gender, practice time, and age of workers. Half of those exposed had complaints compatible with mercury contamination. Among the exposed, the most common complaints were cognitive and neurocognitive symptoms. Correlations between symptoms and exposure time and also number of amalgam fillings placed per week were positive. Amalgam handling resulted in environmental and biological contamination by mercury.

[The "dental amalgam syndrome" - an environmental somatization Syndrome? A comparison between chronic carbon monoxide intoxication and illness related to dental amalgam].

Science.gov (United States)

Leonhardt, T

2001-01-01

In 1940, during World War II, restrictions in import of petroleum products to Sweden necessitated the use of producer gas in motor traffic. In the following years, the incidence of acute carbon monoxide intoxications raised steeply. However, many patients with minor but longstanding exposition to producer gas exhibited a neurastenic syndrome (fatigue, headaches and vertigo) thought to be specific. In Stockholm, an epidemic of this syndrome can afterwards be traced to the personal conviction of an internist who also had an important influence on various authorities, leading to a forceful campaign to the public about the dangers of using producer gas. After some years, the frequency and even the existence of a chronic carbon monoxide intoxication was called in question and at the end of the war that diagnosis lost its actuality. In Sweden, oral galvanism attributed to dental amalgam was discussed in mass media in the 1970s, not least by evidence given by some well-known personalities. In the 1980s, the frequency of illness attributed to dental amalgam increased to an important epidemic. The question of the dangers of mercury released from amalgam fillings is still an important issue of debate among dentists and physicians, although the majority remains sceptical. Also medical authorities have found little evidence of the importance of dental amalgam toxicity. A patients organisation, Tandvårdsskadeförbundet, seems to have played a significant part in the acceptance of the syndrome among laymen. Thus, various psychosocial factors seem to have played a role in both syndromes which could thus be conceived as environmental somatization syndromes.

Understanding the mercury reduction issue: the impact of mercury on the environment and human health.

Science.gov (United States)

Kao, Richard T; Dault, Scott; Pichay, Teresa

2004-07-01

Mercury has been used in both medicine and dentistry for centuries. Recent media attention regarding the increased levels of mercury in dietary fish, high levels of mercury in air emissions, and conjecture that certain diseases may be caused by mercury exposure has increased public awareness of the potential adverse health effects of high doses of mercury. Dentistry has been criticized for its continued use of mercury in dental amalgam for both public health and environmental reasons. To address these concerns, dental professionals should understand the impact of the various levels and types of mercury on the environment and human health. Mercury is unique in its ability to form amalgams with other metals. Dental amalgam--consisting of silver, copper, tin, and mercury--has been used as a safe, stable, and cost-effective restorative material for more than 150 years. As a result of this use, the dental profession has been confronted by the public on two separate health issues concerning the mercury content in amalgam. The first issue is whether the mercury amalgamated with the various metals to create dental restorations poses a health issue for patients. The second is whether the scraps associated with amalgam placement and the removal of amalgam restorations poses environmental hazards which may eventually have an impact on human health. Despite the lack of scientific evidence for such hazards, there is growing pressure for the dental profession to address these health issues. In this article, the toxicology of mercury will be reviewed and the impact of amalgam on health and the environment will be examined.

Micro-PIXE study of metal loss from dental amalgam

Science.gov (United States)

Meesat, Ridthee; Sudprasert, Wanwisa; Guibert, Edouard; Wang, Liping; Chappuis, Thibault; Whitlow, Harry J.

2017-08-01

Mercury amalgams have been a topic of controversy ever since their introduction over 150 years ago as a dental material. An interesting question is if metals are released from the amalgam into the enamel and dentine tissue. To elucidate this PIXE mapping was used to investigate metal redistribution in an extracted molar tooth with a ∼30 year old high-Cu content amalgam filling. The tooth was sectioned and polished, and elemental mapping carried out on the amalgam/enamel, bulk amalgam and the wear surface of the amalgam. As expected, the amalgam was multiphase amalgam comprising of Cu-rich and Ag-rich grains with non-uniform distribution of Hg. The amalgam/dentine interface was clearly defined with amalgam elements on one side and C and P from hydroxyapatite on the other side with evidence of only slight interface corrosion. The peaks for Cu Hg and Zn were isolated from interfering signals with concentrations in the enamel tissue, observed to be at, or below the method detection limit. The proximity in energy of the Sn L α and Ca K α , peaks and the background on the Hg M α gave signal overlap which increased the MDL for these elements. Remarkably, a course grain texture in the amalgam was observed just below the biting surface of the amalgam which might be associated with tribochemical processes from mastication. This coupled with the clear absence of the amalgam metals from tooth tissue, even in close proximity to the interface, suggests that for this sample, release of Hg occurred via erosion or dissolution in saliva.

Preparation of dental amalgam and spectral diagnosis of mercury in plasmas-laser in the region of 250 nm – 850 nm

International Nuclear Information System (INIS)

Ossa, A De la; Pacheco, P; Sarmiento, R

2013-01-01

In this paper we presents results of the spectral study of plasmas-laser of dental amalgam by technique Laser-induced Breakdown Spectroscopy (LIBS). Plasmas were generated focusing the beam of a Nd: YAG laser on the matrix of the mixture Ag-Sn-Cu and on amalgams with different proportions of mercury (3:2, 5:2, 6:2). Based on the spectral results and reported atomic parameters, became estimation of electron temperature plasmas- laser and their behavior with the concentration of Hg. The estimated values of the electron temperature for the respective proportions were 20 846 K, 19 139 K and 16 872 K, using the distribution of population of Boltzmann energy levels associated with spectral lines, considering conditions Local Thermodinamic Equilibrium (LTE) of plasmas

A Review of Mercury Exposure and Health of Dental Personnel

Directory of Open Access Journals (Sweden)

Natasha Nagpal

2017-03-01

Full Text Available Considerable effort has been made to address the issue of occupational health and environmental exposure to mercury. This review reports on the current literature of mercury exposure and health impacts on dental personnel. Citations were searched using four comprehensive electronic databases for articles published between 2002 and 2015. All original articles that evaluated an association between the use of dental amalgam and occupational mercury exposure in dental personnel were included. Fifteen publications from nine different countries met the selection criteria. The design and quality of the studies showed significant variation, particularly in the choice of biomarkers as an indicator of mercury exposure. In several countries, dental personnel had higher mercury levels in biological fluids and tissues than in control groups; some work practices increased mercury exposure but the exposure levels remained below recommended guidelines. Dental personnel reported more health conditions, often involving the central nervous system, than the control groups. Clinical symptoms reported by dental professionals may be associated with low-level, long-term exposure to occupational mercury, but may also be due to the effects of aging, occupational overuse, and stress. It is important that dental personnel, researchers, and educators continue to encourage and monitor good work practices by dental professionals.

[The future of dental amalgam

NARCIS (Netherlands)

Opdam, N.J.M.

2005-01-01

This paper is a comment on 'The enigma of dental amalgam' by Carl Leinfelder published in 2004 in the Journal of Esthetic and Restorative Dentistry. In that paper a warning is stated against a too abrupt change from amalgam towards resin composite, because this will bring a lot of clinical problems

Exposures of dental professionals to elemental mercury and methylmercury.

Science.gov (United States)

Goodrich, Jaclyn M; Chou, Hwai-Nan; Gruninger, Stephen E; Franzblau, Alfred; Basu, Niladri

2016-01-01

Mercury (Hg) exposure, a worldwide public health concern, predominantly takes two forms--methylmercury from fish consumption and elemental Hg from dental amalgam restorations. We recruited 630 dental professionals from an American Dental Association meeting to assess Hg body burden and primary sources of exposure in a dually exposed population. Participants described occupational practices and fish consumption patterns via questionnaire. Hg levels in biomarkers of elemental Hg (urine) and methylmercury (hair and blood) were measured with a Direct Mercury Analyzer-80 and were higher than the general US population. Geometric means (95% CI) were 1.28 (1.19-1.37) μg/l in urine, 0.60 (0.54-0.67) μg/g in hair and 3.67 (3.38-3.98) μg/l in blood. In multivariable linear regression, personal amalgams predicted urine Hg levels along with total years in dentistry, amalgams handled, working hours and sex. Fish consumption patterns predicted hair and blood Hg levels, which were higher among Asians compared with Caucasians. Five species contributed the majority of the estimated Hg intake from fish--swordfish, fresh tuna, white canned tuna, whitefish and king mackerel. When studying populations with occupational exposure to Hg, it is important to assess environmental exposures to both elemental Hg and methylmercury as these constitute a large proportion of total exposure.

Neurodevelopmental outcomes at 5 years in children exposed prenatally to maternal dental amalgam: the Seychelles Child Development Nutrition Study.

Science.gov (United States)

Watson, Gene E; van Wijngaarden, Edwin; Love, Tanzy M T; McSorley, Emeir M; Bonham, Maxine P; Mulhern, Maria S; Yeates, Alison J; Davidson, Philip W; Shamlaye, Conrad F; Strain, J J; Thurston, Sally W; Harrington, Donald; Zareba, Grazyna; Wallace, Julie M W; Myers, Gary J

2013-01-01

Limited human data are available to assess the association between prenatal mercury vapor (Hg⁰)) exposure from maternal dental amalgam restorations and neurodevelopment of children. We evaluated the association between maternal dental amalgam status during gestation and children's neurodevelopmental outcomes at 5 years in the Seychelles Child Development Nutrition Study (SCDNS). Maternal amalgam status was determined prospectively in a longitudinal cohort study examining the associations of prenatal exposure to nutrients and methylmercury (MeHg) with neurodevelopment. A total of 236 mother-child pairs initially enrolled in the SCDNS in 2001 were eligible to participate. Maternal amalgam status was measured as number of amalgam surfaces (the primary metric) and number of occlusal points. The neurodevelopmental assessment battery was comprised of age-appropriate tests of cognitive, language, and perceptual functions, and scholastic achievement. Linear regression analysis controlled for MeHg exposure, maternal fatty acid status, and other covariates relevant to child development. Maternal amalgam status evaluation yielded an average of 7.0 surfaces (range 0-28) and 11.0 occlusal points (range 0-40) during pregnancy. Neither the number of maternal amalgam surfaces nor occlusal points were associated with any outcome. Our findings do not provide evidence to support a relationship between prenatal exposure to Hg⁰ from maternal dental amalgam and neurodevelopmental outcomes in children at 5 years of age. © 2013.

The Changes in Dentists' Perception and Patient's Acceptance on Amalgam Restoration in Kurdistan-Iraq: A Questionnaire-based Cross-Sectional Study.

Science.gov (United States)

Faraj, Bestoon Mohammad; Mohammad, Hawzhen Masoud; Mohammad, Kale Masoud

2015-04-01

There has been considerable controversy concerning the health risks and benefits of utilizing mercury-containing amalgam. Across the developing countries, a reduction in the use of dental amalgam in oral health care provision is expected. Assessment of dentists' and patient's attitude of dental amalgam regarding attractiveness, perceived health, and treatment preferences in Kurdistan, Iraq. A 4-page questionnaire comprised two parts, specific for dentist and patient were structured and delivered to each dentist oneself. Both open-ended and close-ended questions about the treatment needs of patients, uses of amalgam and its alternative, the properties and usefulness of different materials. Patient's acceptance was assessed by means of structured questionnaire prepared based on commonly asked questions from routinely daily practice. Questions on the type of filling material in their mouth, previous knowledge of mercury in dental amalgam and disappointment due to mercury hazard and toxicity. They were to indicate their acceptance with filling their cavities by dental amalgam with or without prior information about its mercury content. This part was also accomplished by the dentists participated in this survey. Out of 185 dentists shared, only 39 (21.1%) indicated that amalgam presents no harm for the dentists and patients. While majority of dentists 85 (45.9%) were uncertain about this issue. Amalgam was selected most often 107 (57.8%) as the material of choice for restoring posterior teeth. About 94(50.8%) and 85(45.9%) of the practitioners primarily used glass ionomer/resin-reinforced glass ionomer and composite, respectively. Among 1850 patients received treatment, only 450 (24.32%) claimed to have heard about adverse reactions to dental amalgams. Those who believed it to be safe were 200 (10.82%).Acceptance towards amalgam was 62%. While amalgam was the most common material used for posterior restorations, direct tooth-coloured restorative materials were also

Increased Zn/Glutathione Levels and Higher Superoxide Dismutase-1 Activity as Biomarkers of Oxidative Stress in Women with Long-Term Dental Amalgam Fillings: Correlation between Mercury/Aluminium Levels (in Hair) and Antioxidant Systems in Plasma

Science.gov (United States)

Cabaña-Muñoz, María Eugenia; Parmigiani-Izquierdo, José María; Bravo-González, Luis Alberto; Kyung, Hee-Moon; Merino, José Joaquín

2015-01-01

Background The induction of oxidative stress by Hg can affect antioxidant enzymes. However, epidemiological studies have failed to establish clear association between dental fillings presence and health problems. Objectives To determine whether heavy metals (in hair), antioxidant enzymes (SOD-1) and glutathione levels could be affected by the chronic presence of heavy metals in women who had dental amalgam fillings. Materials and Methods 55 hair samples (42 females with amalgam fillings and 13 female control subjects) were obtained. All subjects (mean age 44 years) who had dental amalgam filling for more than 10 years (average 15 years). Certain metals were quantified by ICP-MS (Mass Spectrophotometry) in hair (μg/g: Al, Hg, Ba, Ag, Sb, As, Be, Bi, Cd, Pb, Pt, Tl, Th, U, Ni, Sn, Ti) and SOD-1 and Glutathione (reduced form) levels in plasma. Data were compared with controls without amalgams, and analyzed to identify any significant relation between metals and the total number of amalgam fillings, comparing those with four or less (n = 27) with those with more than four (n = 15). As no significant differences were detected, the two groups were pooled (Amlgam; n = 42). Findings Hg, Ag, Al and Ba were higher in the amalgam group but without significant differences for most of the heavy metals analyzed. Increased SOD-1 activity and glutathione levels (reduced form) were observed in the amalgam group. Aluminum (Al) correlated with glutathione levels while Hg levels correlated with SOD-1. The observed Al/glutathione and Hg/SOD-1 correlation could be adaptive responses against the chronic presence of mercury. Conclusions Hg, Ag, Al and Ba levels increased in women who had dental amalgam fillings for long periods. Al correlated with glutathione, and Hg with SOD-1. SOD-1 may be a possible biomarker for assessing chronic Hg toxicity. PMID:26076368

"Triple M" Effect: A Proposed Mechanism to Explain Increased Dental Amalgam Microleakage after Exposure to Radiofrequency Electromagnetic Radiation.

Science.gov (United States)

Mortazavi, Gh; Mortazavi, S A R; Mehdizadeh, A R

2018-03-01

A large body of evidence now indicates that the amount of mercury released from dental amalgam fillings can be significantly accelerated by exposure to radiofrequency electromagnetic fields (RF-EMFs) such as common mobile phones and magnetic resonance imaging (MRI). Studies performed on the increased microleakage of dental amalgam restorations after exposure to RF-EMFs have further supported these findings. Although the accelerated microleakage induced by RF-EMFs is clinically significant, the entire mechanisms of this phenomenon are not clearly understood. In this paper, we introduce "Triple M" effect, a new evidence-based theory which can explain the accelerated microleakage of dental amalgam fillings after exposure to different sources of electromagnetic radiation. Based on this theory, there are saliva-filled tiny spaces between amalgam and the tooth. Exposure of the oral cavity to RF-EMFs increases the energy of these small amounts of saliva. Due to the small mass of saliva in these tiny spaces, a small amount of energy will be required for heating. Moreover, reflection of the radiofrequency radiation on the inner walls of the tiny spaces causes interference which in turn produces some "hot spots" in these spaces. Finally, formation of gas bubbles in response to increased temperature and very rapid expansion of these bubbles will accelerate the microleakage of amalgam. Experiments that confirm the validity of this theory are discussed.

Mercurio y salud en la odontología Mercury and health in the dental practice

Directory of Open Access Journals (Sweden)

Ivelin Morales Fuentes

2003-04-01

Full Text Available El mercurio es un metal pesado ampliamente utilizado por el hombre. Se considera muy tóxico por generar afecciones sobre el sistema nervioso central, perturbaciones en el comportamiento y trastornos renales, inmunes y sexuales, entre otros. Desde hace más de un siglo, el mercurio es utilizado en la práctica odontológica por su capacidad de unir metales (amalgamar, su bajo costo y su rápida fijación en la reparación de piezas dentales. Actualmente, existe una gran controversia acerca de la seguridad del uso de las amalgamas dentales y se ha demostrado el riesgo ocupacional al que están expuestos dentistas y asistentes dentales. El objetivo del trabajo es revisar aspectos relacionados con la toxicidad del mercurio metálico tanto para el personal involucrado en la práctica odontológica como para los pacientes con amalgamas. De igual modo, se presentan las rutas de exposición a este metal en la odontología, los riesgos ocupacionales a los cuales están expuestos los odontólogos y asistentes dentales y las medidas para prevenir la intoxicación por mercurio. Se realizó la búsqueda bibliográfica sobretudo en las bases de datos Biological Abstracts y Science Citation Index para el período comprendido entre los años 1990 y 2000.Mercury is a heavy metal widely used by man. It is considered very toxic causing conditions in the central nervous system, behavior disturbances, and renal and sexual disorders. For a century, mercury has been used in the dental practice for its capacity of joining metals (amalgamate, its low cost and its rapid fixing in dental pieces repair. Currently, there is much controversy about the safety of dental amalgams and it has been demonstrated it poses occupational risks to dental practitioners and their assistants. The objective of this study is review aspects related to metallic mercury toxicity for personnel involved in the dental practice and patients with dental amalgams. Routes of mercury exposure in

Improving the strength of amalgams by including steel fibers

Energy Technology Data Exchange (ETDEWEB)

Cochran, Calvin T. [Hendrix College, Conway, AR 72032 (United States); Van Hoose, James R. [Siemens, Orlando, FL 32826 (United States); McGill, Preston B. [Marshall Space Flight Center, EM20, Huntsville, AL 35812 (United States); Grugel, Richard N., E-mail: richard.n.grugel@nasa.gov [Marshall Space Flight Center, EM30, Huntsville, AL 35812 (United States)

2012-05-30

Highlights: Black-Right-Pointing-Pointer A room temperature liquid Ga-In alloy was successfully substituted for mercury. Black-Right-Pointing-Pointer Physically sound amalgams with included steel fibers can be made. Black-Right-Pointing-Pointer A small volume fraction inclusion of fibers increased strength by {approx}20%. - Abstract: Mercury amalgams, due to their material properties, are widely and successfully used in dental practice. They are, however, also well recognized as having poor tensile strength. With the possibility of expanding amalgam applications it is demonstrated that tensile strength can be increased some 20% by including a small amount of steel fibers. Furthermore, it is shown that mercury can be replaced with a room temperature liquid gallium-indium alloy. Processing, microstructures, and mechanical test results of these novel amalgams are presented and discussed in view of means to further improve their properties.

“Triple M” Effect: A Proposed Mechanism to Explain Increased Dental Amalgam Microleakage after Exposure to Radiofrequency Electromagnetic Radiation

Science.gov (United States)

Mortazavi, Gh.; Mortazavi, S.A.R.; Mehdizadeh, A.R.

2018-01-01

A large body of evidence now indicates that the amount of mercury released from dental amalgam fillings can be significantly accelerated by exposure to radiofrequency electromagnetic fields (RF-EMFs) such as common mobile phones and magnetic resonance imaging (MRI). Studies performed on the increased microleakage of dental amalgam restorations after exposure to RF-EMFs have further supported these findings. Although the accelerated microleakage induced by RF-EMFs is clinically significant, the entire mechanisms of this phenomenon are not clearly understood. In this paper, we introduce “Triple M” effect, a new evidence-based theory which can explain the accelerated microleakage of dental amalgam fillings after exposure to different sources of electromagnetic radiation. Based on this theory, there are saliva-filled tiny spaces between amalgam and the tooth. Exposure of the oral cavity to RF-EMFs increases the energy of these small amounts of saliva. Due to the small mass of saliva in these tiny spaces, a small amount of energy will be required for heating. Moreover, reflection of the radiofrequency radiation on the inner walls of the tiny spaces causes interference which in turn produces some “hot spots” in these spaces. Finally, formation of gas bubbles in response to increased temperature and very rapid expansion of these bubbles will accelerate the microleakage of amalgam. Experiments that confirm the validity of this theory are discussed. PMID:29732349

Longevity of dental amalgam in comparison to composite materials

Directory of Open Access Journals (Sweden)

Windisch, Friederike

2008-11-01

Full Text Available Health political background: Caries is one of the most prevalent diseases worldwide. For (direct restaurations of carious lesions, tooth-coloured composite materials are increasingly used. The compulsory health insurance pays for composite fillings in front teeth; in posterior teeth, patients have to bear the extra cost. Scientific background: Amalgam is an alloy of mercury and other metals and has been used in dentistry for more than one hundred and fifty years. Composites consist of a resin matrix and chemically bonded fillers. They have been used for about fifty years in front teeth. Amalgam has a long longevity; the further development of composites has also shown improvements regarding their longevity. Research questions: This HTA-report aims to evaluate the longevity (failure rate, median survival time (MST, median age of direct amalgam fillings in comparison to direct composite fillings in permanent teeth from a medical and economical perspective and discusses the ethical, legal and social aspects of using these filling materials. Methods: The systematic literature search yielded a total of 1,149 abstracts. After a two-step selection process based on defined criteria 25 publications remained to be assessed. Results: The medical studies report a longer longevity for amalgam fillings than for composite fillings. However, the results of these studies show a large heterogeneity. No publication on the costs or the cost-effectiveness of amalgam and composite fillings exists for Germany. The economic analyses (NL, SWE, GB report higher costs for composite fillings when longevity is assumed equal (for an observation period of five years or longer for amalgam compared to composite fillings. These higher costs are due to the higher complexity of placing composite fillings. Discussion: Due to different study designs and insufficient documentation of study details, a comparison of different studies on longevity of direct amalgam and composite

The mercury-richest europium amalgam Eu{sub 10}Hg{sub 55}

Energy Technology Data Exchange (ETDEWEB)

Tambornino, Frank; Hoch, Constantin [Department of Chemistry, Ludwig-Maximilians-Universitaet Muenchen (Germany)

2015-03-15

The mercury-richest europium amalgam Eu{sub 10}Hg{sub 55} was synthesized by isothermal electrocrystallization from a solution of EuI{sub 3}.8DMF in DMF on a reactive mercury cathode. The crystal structure shows remarkable complexity and polar metal-metal bonding. Closely related to the structures of mercury-rich amalgams A{sub 11-x}Hg{sub 55+x} (A = Na, Ca, Sr), it shows underoccupied Hg positions along [00z]. Eu{sub 10}Hg{sub 55} can be described as hettotype structure of the Gd{sub 14}Ag{sub 51} structure type. (Copyright copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Glutathione enzyme and selenoprotein polymorphisms associate with mercury biomarker levels in Michigan dental professionals

Energy Technology Data Exchange (ETDEWEB)

Goodrich, Jaclyn M.; Wang, Yi [Department of Environmental Health Sciences, University of Michigan School of Public Health, 1415 Washington Heights, Ann Arbor, MI 48109 (United States); Gillespie, Brenda [Department of Biostatistics, University of Michigan School of Public Health, 1415 Washington Heights, Ann Arbor, MI 48109 (United States); Werner, Robert [Department of Environmental Health Sciences, University of Michigan School of Public Health, 1415 Washington Heights, Ann Arbor, MI 48109 (United States); Department of Physical Medicine and Rehabilitation, University of Michigan, 325 E. Eisenhower Parkway Suite 100, Ann Arbor, MI 48108 (United States); Franzblau, Alfred [Department of Environmental Health Sciences, University of Michigan School of Public Health, 1415 Washington Heights, Ann Arbor, MI 48109 (United States); Basu, Niladri, E-mail: niladri@umich.edu [Department of Environmental Health Sciences, University of Michigan School of Public Health, 1415 Washington Heights, Ann Arbor, MI 48109 (United States)

2011-12-15

Mercury is a potent toxicant of concern to both the general public and occupationally exposed workers (e.g., dentists). Recent studies suggest that several genes mediating the toxicokinetics of mercury are polymorphic in humans and may influence inter-individual variability in mercury accumulation. This work hypothesizes that polymorphisms in key glutathione synthesizing enzyme, glutathione s-transferase, and selenoprotein genes underlie inter-individual differences in mercury body burden as assessed by analytical mercury measurement in urine and hair, biomarkers of elemental mercury and methylmercury, respectively. Urine and hair samples were collected from a population of dental professionals (n = 515), and total mercury content was measured. Average urine (1.06 {+-} 1.24 ug/L) and hair mercury levels (0.49 {+-} 0.63 ug/g) were similar to national U.S. population averages. Taqman assays were used to genotype DNA from buccal swab samples at 15 polymorphic sites in genes implicated in mercury metabolism. Linear regression modeling assessed the ability of polymorphisms to modify the relationship between mercury biomarker levels and exposure sources (e.g., amalgams, fish consumption). Five polymorphisms were significantly associated with urine mercury levels (GSTT1 deletion), hair mercury levels (GSTP1-105, GSTP1-114, GSS 5 Prime ), or both (SEPP1 3 Prime UTR). Overall, this study suggests that polymorphisms in selenoproteins and glutathione-related genes may influence elimination of mercury in the urine and hair or mercury retention following exposures to elemental mercury (via dental amalgams) and methylmercury (via fish consumption). -- Highlights: Black-Right-Pointing-Pointer We explore the influence of 15 polymorphisms on urine and hair Hg levels. Black-Right-Pointing-Pointer Urine and hair Hg levels in dental professionals were similar to the US population. Black-Right-Pointing-Pointer GSTT1 and SEPP1 polymorphisms associated with urine Hg levels. Black

Glutathione enzyme and selenoprotein polymorphisms associate with mercury biomarker levels in Michigan dental professionals

International Nuclear Information System (INIS)

Goodrich, Jaclyn M.; Wang, Yi; Gillespie, Brenda; Werner, Robert; Franzblau, Alfred; Basu, Niladri

2011-01-01

Mercury is a potent toxicant of concern to both the general public and occupationally exposed workers (e.g., dentists). Recent studies suggest that several genes mediating the toxicokinetics of mercury are polymorphic in humans and may influence inter-individual variability in mercury accumulation. This work hypothesizes that polymorphisms in key glutathione synthesizing enzyme, glutathione s-transferase, and selenoprotein genes underlie inter-individual differences in mercury body burden as assessed by analytical mercury measurement in urine and hair, biomarkers of elemental mercury and methylmercury, respectively. Urine and hair samples were collected from a population of dental professionals (n = 515), and total mercury content was measured. Average urine (1.06 ± 1.24 ug/L) and hair mercury levels (0.49 ± 0.63 ug/g) were similar to national U.S. population averages. Taqman assays were used to genotype DNA from buccal swab samples at 15 polymorphic sites in genes implicated in mercury metabolism. Linear regression modeling assessed the ability of polymorphisms to modify the relationship between mercury biomarker levels and exposure sources (e.g., amalgams, fish consumption). Five polymorphisms were significantly associated with urine mercury levels (GSTT1 deletion), hair mercury levels (GSTP1-105, GSTP1-114, GSS 5′), or both (SEPP1 3′UTR). Overall, this study suggests that polymorphisms in selenoproteins and glutathione-related genes may influence elimination of mercury in the urine and hair or mercury retention following exposures to elemental mercury (via dental amalgams) and methylmercury (via fish consumption). -- Highlights: ► We explore the influence of 15 polymorphisms on urine and hair Hg levels. ► Urine and hair Hg levels in dental professionals were similar to the US population. ► GSTT1 and SEPP1 polymorphisms associated with urine Hg levels. ► Accumulation of Hg in hair following exposure from fish was modified by genotype. ► GSTP1, GSS

Exposure to mercury and silver during removal of amalgam restorations

International Nuclear Information System (INIS)

Brune, D.; Hensten-Pettersen, A.; Beltesbrekke, H.

1980-01-01

The content of particulate matter and mercury vapor in dentist breathing air during removal of amalgam restorations was assessed. Mercury and silver were quantitatively assayed by nuclerar chemical analysis, and the mercury vapor concentration was measured with a sniffer. When the water spray was not used, the short time threshold limit values for exposure to mercury and silver were exceeded about 10 times. With water spray the mercury content was reduced to a level considerably lower that the threshold limit value, whereas the silver concentration slightly exceeded the corresponding limit. (author)

Exposure to mercury and silver during removal of amalgam restorations

International Nuclear Information System (INIS)

Brune, D.; Hensten-Pettersen, A.; Beltesbrekke, H.

1980-01-01

The content of particulate matter and mercury vapor in dentist breathing air during removal of amalgam restorations was assessed. Mercury and silver were quantitatively assayed by nuclear chemical analysis, and the mercury vapor concentration was measured with a sniffer. When the water spray was not used, the short time threshold limit values for exposure to mercury and silver were exceeded about 10 times. With water spray the mercury content was reduced to a level considerably lower than the threshold limit value, whereas the silver concentration slightly exceeded the corresponding limit. (author)

Quantification of Hg excretion and distribution in biological samples of mercury-dental-amalgam users and its correlation with biological variables.

Science.gov (United States)

Gul, Nayab; Khan, Sardar; Khan, Abbas; Nawab, Javed; Shamshad, Isha; Yu, Xinwei

2016-10-01

This is the first study conducted to quantify the excretion and distribution of mercury (Hg) with time (days) in the biological samples collected from Hg dental amalgam users (MDA). The individuals, with Hg-based dental filling were selected, and their biological samples (red blood cells (RBCs), plasma, urine, hair, and nails) were collected on first, third, and 12th day of fillings. The concentrations of Hg observed in the biological samples of MDA were also correlated with the biological variables such as age, weight, restoration, fish consumption, number, and surface area of fillings. The concentrations of Hg in the biological samples of MDA were found 6-8 times higher than the non-amalgam users (control). The concentrations of Hg in the RBCs (4.39 μg/L), plasma (3.02 μg/L), and urine (22.5 μg/L) on first day of filling were found comparatively higher than the concentrations observed on third day (2.15, 1.46, and 12.3 μg/L for RBCs, plasma, urine, respectively) and 12th day (3.05, 2.5, 9.12 μg/L for RBCs, plasma, urine, respectively), while Hg concentrations were found lower in the hair and nails on third day of fillings (1.53 μg/g for hair and 2.35 μg/g for nails) as compared to the 12th day (2.95 μg/g for hair and 3.5 μg/g for nails). The correlations were found significant (p ˂ 0.05) between Hg concentrations in the biological samples of MDA and biological variables (the number of restoration, fish consumption, number, and surface area of fillings), while no significant (p ˃ 0.05) correlations were observed for Hg concentrations in the biological samples with age and weight of MDA. These observations unveil the fact that the use of Hg-based dental filling is the undesirable exposure to Hg which should be replaced by composite (a safer filling material).

Contribution of environmental conditions in dental offices of Antioquia to the risk of mercury contamination

Directory of Open Access Journals (Sweden)

Jairo A. Ruiz C

2008-06-01

Full Text Available This article is a product from the project “Environmental Management of Dental Amalgam in the State of Antioquia” which was carried out by the following research groups belonging to the University of Antioquia: Science and Biomedical Technology, Precious Materials, and Pirometallurgical and Materials Researches, as well as the private company New Stetic S. A., between February 2005 and February 2007. Objective: to describe the environmental conditions in 30 big dental offices of the State of Antioquia, Colombia. Those dental offices having more than five dental chairs in the same work place were defined as “big” for the purpose of this project. Due to the fact that these dental offices represents 85% of the population of reference, the results described in this article can be consequently considered as is they were derived from a census. The description is made bearing in mind the people who are exposed to the risk of mercury contamination due to their occupation. Materials and method: an observation tool was designed in order to be applied in each dental office. It contained aspects as floor and wall characteristics, ventilation, room temperature, storing place for mercury, elements for handling amalgam scraps, and those activities which deviate from the regular dental service in the same site. Each dental office was visited by a research engineer and an advanced engineering student on a previously defined date. The researchers were trained in advance to collect the information. Results: it was found that some big dental offices have inadequate conditions in their premises for offering their services, and do not have a good handling of the environmental conditions. That’s why immediate actions are mandatory to minimize the risk of mercury contamination.

Gastrointestinal and in vitro release of copper, cadmium, indium, mercury and zinc from conventional and copper-rich amalgams

International Nuclear Information System (INIS)

Brune, D.; Gjerdet, N.; Paulsen, G.

1983-01-01

Particles of a conventional lathe-cut, a spherical non-gamma 2 and a copper amalgam have been gastrointestinally administered to rats for the purpose of evaluation of the dissolution resistance. The animals were sacrificed after 20 hrs. The contents of copper, cadmium, indium, mercury and zinc in kidney, liver, lung or blood were measured using nuclear tracer techniques. From a copper amalgam an extreme release of copper was demonstrated. This study simulates the clinical conditions of elemental release from swallowed amalgam particles after amalgam insertion or after removal of old amalgam fillings. Specimens of the same types of amalgams were also exposed to artificial saliva for a period of 10 days. The amounts of copper and mercury released were measured with flame and flameless atomic absorption spectrophotometry respectively. The levels of copper and mercury released from the copper amalgam were approximately 50 times those of the two other amalgam types studied. (author)

Dental Effluent Guidelines

Science.gov (United States)

Overview and documents for Dental Office Category regulation (40 CFR Part 441); comprising pretreatment standards for discharges of dental amalgam pollutants, including mercury, into publicly owned treatment works (POTWs).

Amalgam Contact Hypersensitivity Lesion: An Unusual Presentation ...

African Journals Online (AJOL)

of electromagnetic fields (e.g. Wi‑Fi, mobile phones and mobile base stations) in intensifying the release of mercury from dental amalgam restorations. Over the past years, our laboratory has focused on studying the health effects of exposure to some common and/or occupational sources of electromagnetic fields such as ...

Evaluation of the dental structure loss produced during maintenance and replacement of occlusal amalgam restorations

Directory of Open Access Journals (Sweden)

Fernanda Sardenberg

2008-09-01

Full Text Available The aim of this in vitro study was to evaluate four different approaches to the decision of changing or not defective amalgam restorations in first primary molar teeth concerning the loss of dental structure. Ditched amalgam restorations (n = 11 were submitted to four different treatments, as follows: Control group - polishing and finishing of the restorations were carried out; Amalgam group - the ditched amalgam restorations were replaced by new amalgam restorations; Composite resin group - the initial amalgam restorations were replaced by composite resin restorations; Flowable resin group - the ditching around the amalgam restorations was filled with flowable resin. Images of the sectioned teeth were made and the area of the cavities before and after the procedures was determined by image analysis software to assess structural loss. The data were submitted to ANOVA complemented by the Student Newman Keuls test (p < 0.05. The cavities in all the groups presented significantly greater areas after the procedures. However, the amalgam group showed more substantial dental loss. The other three groups presented no statistically significant difference in dental structure loss after the re-treatments. Thus, replacing ditched amalgam restorations by other similar restorations resulted in a significant dental structure loss while maintaining them or replacing them by resin restorations did not result in significant loss.

21 CFR 872.3700 - Dental mercury.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental mercury. 872.3700 Section 872.3700 Food and... DENTAL DEVICES Prosthetic Devices § 872.3700 Dental mercury. (a) Identification. Dental mercury is a... dental cavity or a broken tooth. (b) Classification. Class I. ...

Effect of bleaching on mercury release from amalgam fillings and antioxidant enzyme activities: a pilot study.

Science.gov (United States)

Cakir, Filiz Yalcin; Ergin, Esra; Gurgan, Sevil; Sabuncuoglu, Suna; Arpa, Cigdem Sahin; Tokgoz, İlknur; Ozgunes, Hilal; Kiremitci, Arlin

2015-01-01

The aim of this pilot clinical study was to determine the mercury release from amalgam fillings and antioxidant enzyme activities (Superoxide Dismutase [SOD] and Catalase[CAT] ) in body fluids after exposure to two different vital tooth bleaching systems. Twenty eight subjects with an average age of 25.6 years (18-41) having at least two but not more than four Class II amalgam fillings on each quadrant arch in the mouth participated in the study. Baseline concentrations of mercury levels in whole blood, urine, and saliva were measured by a Vapor Generation Accessory connected to an Atomic Absorption Spectrometer. Erythrocyte enzymes, SOD, and CAT activities in blood were determined kinetically. Subjects were randomly assigned to two groups of 14 volunteers. Group 1 was treated with an at-home bleaching system (Opalescence PF 35% Carbamide Peroxide, Ultradent), and Group 2 was treated with a chemically activated office bleaching system (Opalescence Xtra Boost 38% Hydrogen Peroxide, Ultradent) according to the manufacturer's recommendations. Twenty-four hours after bleaching treatments, concentrations of mercury and enzymes were remeasured. There were no significant differences on mercury levels in blood, urine, and saliva before and after bleaching treatments (p > 0.05). No differences were also found in the level of antioxidant enzyme activities (SOD and CAT) before and after treatments (p > 0.05). Mercury release did not affect the enzyme activities (p > 0.05). Bleaching treatments either office or home did not affect the amount of mercury released from amalgam fillings in blood, urine, and saliva and the antioxidant-enzyme activities in blood. Bleaching treatments with the systems tested in this pilot study have no deleterious effect on the mercury release from amalgam fillings and antioxidant enzymes in body fluids. © 2014 Wiley Periodicals, Inc.

Determination of mercury in dentists through Neutron activation analysis

International Nuclear Information System (INIS)

Padilla M, M.A.; Granados C, F.

1999-01-01

It was determined the mercury levels in urine through Neutron activation analysis to 25 dentists who have been exposed to mercury by several time periods, because of the routine manipulations of amalgams. The determined concentrations of mercury were less to 10 μ g Hg/l of urine. The results were founded inside the safety limits reported in the literature. The mercury levels in the dentists are associated with a wide variety of factors that contribute to their exposure as: number of years of dental practice, number of amalgams manipulated between others. (Author)

Neurological symptoms among dental assistants: a cross-sectional study.

Science.gov (United States)

Moen, Be; Hollund, Be; Riise, T

2008-05-18

Dental assistants help the dentist in preparing material for filling teeth. Amalgam was the filling material mostly commonly used in Norway before 1980, and declined to about 5% of all fillings in 2005. Amalgam is usually an alloy of silver, copper, tin and mercury. Copper amalgam, giving particularly high exposure to mercury was used in Norway until 1994. Metallic mercury is neurotoxic. Few studies of the health of dental assistants exist, despite their exposure to mercury. There are questions about the existence of possible chronic neurological symptoms today within this working group, due to this exposure. The aim of this study was to compare the occurrence of neurological symptoms among dental assistants likely to be exposed to mercury from work with dental filling material, compared to similar health personnel with no such exposure. All dental assistants still at work and born before 1970 registered in the archives of a trade union in Hordaland county of Norway were invited to participate (response rate 68%, n = 41), as well as a similar number of randomly selected assistant nurses (response rate 87%, n = 64) in the same age group. The participants completed a self-administered, mailed questionnaire, with questions about demographic variables, life-style factors, musculoskeletal, neurological and psychosomatic symptoms (Euroquest). The dental assistants reported significant higher occurrence of neurological symptoms; psychosomatic symptoms, problems with memory, concentration, fatigue and sleep disturbance, but not for mood. This was found by analyses of variance, adjusting for age, education, alcohol consumption, smoking and personality traits. For each specific neurological symptom, adjusted logistic regression analyses were performed, showing that these symptoms were mainly from arms, hands, legs and balance organs. There is a possibility that the higher occurrence of neurological symptoms among the dental assistants may be related to their previous work

Neurological symptoms among dental assistants: a cross-sectional study

Directory of Open Access Journals (Sweden)

Hollund BE

2008-05-01

Full Text Available Abstract Background Dental assistants help the dentist in preparing material for filling teeth. Amalgam was the filling material mostly commonly used in Norway before 1980, and declined to about 5% of all fillings in 2005. Amalgam is usually an alloy of silver, copper, tin and mercury. Copper amalgam, giving particularly high exposure to mercury was used in Norway until 1994. Metallic mercury is neurotoxic. Few studies of the health of dental assistants exist, despite their exposure to mercury. There are questions about the existence of possible chronic neurological symptoms today within this working group, due to this exposure. The aim of this study was to compare the occurrence of neurological symptoms among dental assistants likely to be exposed to mercury from work with dental filling material, compared to similar health personnel with no such exposure. Methods All dental assistants still at work and born before 1970 registered in the archives of a trade union in Hordaland county of Norway were invited to participate (response rate 68%, n = 41, as well as a similar number of randomly selected assistant nurses (response rate 87%, n = 64 in the same age group. The participants completed a self-administered, mailed questionnaire, with questions about demographic variables, life-style factors, musculoskeletal, neurological and psychosomatic symptoms (Euroquest. Results The dental assistants reported significant higher occurrence of neurological symptoms; psychosomatic symptoms, problems with memory, concentration, fatigue and sleep disturbance, but not for mood. This was found by analyses of variance, adjusting for age, education, alcohol consumption, smoking and personality traits. For each specific neurological symptom, adjusted logistic regression analyses were performed, showing that these symptoms were mainly from arms, hands, legs and balance organs. Conclusion There is a possibility that the higher occurrence of neurological symptoms

Do Dental Resin Composites Accumulate More Oral Biofilms and Plaque than Amalgam and Glass Ionomer Materials?

Directory of Open Access Journals (Sweden)

Ning Zhang

2016-11-01

Full Text Available A long-time drawback of dental composites is that they accumulate more biofilms and plaques than amalgam and glass ionomer restorative materials. It would be highly desirable to develop a new composite with reduced biofilm growth, while avoiding the non-esthetics of amalgam and low strength of glass ionomer. The objectives of this study were to: (1 develop a protein-repellent composite with reduced biofilms matching amalgam and glass ionomer for the first time; and (2 investigate their protein adsorption, biofilms, and mechanical properties. Five materials were tested: A new composite containing 3% of protein-repellent 2-methacryloyloxyethyl phosphorylcholine (MPC; the composite with 0% MPC as control; commercial composite control; dental amalgam; resin-modified glass ionomer (RMGI. A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate metabolic activity, colony-forming units (CFU, and lactic acid production. Composite with 3% MPC had flexural strength similar to those with 0% MPC and commercial composite control (p > 0.1, and much greater than RMGI (p < 0.05. Composite with 3% MPC had protein adsorption that was only 1/10 that of control composites (p < 0.05. Composite with 3% MPC had biofilm CFU and lactic acid much lower than control composites (p < 0.05. Biofilm growth, metabolic activity and lactic acid on the new composite with 3% MPC were reduced to the low level of amalgam and RMGI (p > 0.1. In conclusion, a new protein-repellent dental resin composite reduced oral biofilm growth and acid production to the low levels of non-esthetic amalgam and RMGI for the first time. The long-held conclusion that dental composites accumulate more biofilms than amalgam and glass ionomer is no longer true. The novel composite is promising to finally overcome the major biofilm-accumulation drawback of dental composites in order to reduce biofilm acids and secondary caries.

Residual mercury content and leaching of mercury and silver from used amalgam capsules.

Science.gov (United States)

Stone, M E; Pederson, E D; Cohen, M E; Ragain, J C; Karaway, R S; Auxer, R A; Saluta, A R

2002-06-01

The objective of this investigation was to carry out residual mercury (Hg) determinations and toxicity characteristic leaching procedure (TCLP) analysis of used amalgam capsules. For residual Hg analysis, 25 capsules (20 capsules for one brand) from each of 10 different brands of amalgam were analyzed. Total residual Hg levels per capsule were determined using United States Environmental Protection Agency (USEPA) Method 7471. For TCLP analysis, 25 amalgam capsules for each of 10 brands were extracted using a modification of USEPA Method 1311. Hg analysis of the TCLP extracts was done with USEPA Method 7470A. Analysis of silver (Ag) concentrations in the TCLP extract was done with USEPA Method 6010B. Analysis of the residual Hg data resulted in the segregation of brands into three groups: Dispersalloy capsules, Group A, retained the most Hg (1.225 mg/capsule). These capsules were the only ones to include a pestle. Group B capsules, Valliant PhD, Optaloy II, Megalloy and Valliant Snap Set, retained the next highest amount of Hg (0.534-0.770 mg/capsule), and were characterized by a groove in the inside of the capsule. Group C, Tytin regular set double-spill, Tytin FC, Contour, Sybraloy regular set, and Tytin regular set single-spill retained the least amount of Hg (0.125-0.266 mg/capsule). TCLP analysis of the triturated capsules showed Sybraloy and Contour leached Hg at greater than the 0.2 mg/l Resource Conservation and Recovery Act (RCRA) limit. This study demonstrated that residual mercury may be related to capsule design features and that TCLP extracts from these capsules could, in some brands, exceed RCRA Hg limits, making their disposal problematic. At current RCRA limits, the leaching of Ag is not a problem.

In Vitro Description of Macroscopic Changes of Dental Amalgam Discs Subject to High Temperatures to Forensic Purposes.

Science.gov (United States)

Arcos, Carlos; Díaz, Juan-David; Canencio, Kenny; Rodríguez, Diana; Viveros, Carlos; Vega, Jonathan; Lores, Juliana; Sinisterra, Gustavo; Sepúlveda, Wilmer; Moreno, Freddy

2015-07-01

To describe the behavior of 45 discs of dental amalgam of known dimension prepared from three commercially available brands of dental amalgam (Contour® Kerr®-USA, Admix® SDI®-Australia and Nu Alloy® Newstethic®-Colombia) when subjected to the action of high temperatures (200 °C, 400 °C, 600 °C, 800 °C, 1000 °C). It was hoped to establish parameters that could be used for human dental identification in cases of charred, burned or incinerated human remains. A pseudo-experimental descriptive in-vitro study was designed to describe the macroscopic physical changes to the surface of 45 discs of pre-prepared amalgam of three commercially available brands exposed to a range of high temperatures. Characteristic and repetitive physical changes were a noticeable feature of the discs of amalgam of each brand of amalgam subjected to the different temperature ranges. These physical changes included changes in dimensional stability, changes in texture, changes in colour, changes in the appearance of fissures and cracks and changes in the fracture and fragmentation of the sample. The characteristics of dental amalgam may be of assistance in cases of human identification where charred, burned or incinerated human remains are a feature and where fingerprints or other soft tissue features are unavailable.

Scalp hair and saliva as biomarkers in determination of mercury levels in Iranian women: Amalgam as a determinant of exposure

Energy Technology Data Exchange (ETDEWEB)

Fakour, H., E-mail: fakour.h@gmail.com [Department of Environment, Faculty of Natural Resources and Marine Sciences, Tarbiat Modares University, Noor, Mazandaran (Iran, Islamic Republic of); Esmaili-Sari, A. [Department of Environment, Faculty of Natural Resources and Marine Sciences, Tarbiat Modares University, Noor, Mazandaran (Iran, Islamic Republic of); Zayeri, F. [Department of Biostatistics, Faculty of Paramedical Sciences and Proteomics Research Center, Shahid Beheshti University of Medical Sciences, Tehran (Iran, Islamic Republic of)

2010-05-15

The aim of this study was to determine the relationship between mercury concentrations in saliva and hair in women with amalgam fillings and its relation with age and number of amalgam fillings. Eighty-two hair and saliva samples were collected randomly from Iranian women who have the same fish consumption pattern and free from occupational exposures. The mean {+-} SD age of these women was 29.37 {+-} 8.12 (ranged from 20 to 56). The determination of Hg level in hair samples was carried out by the LECO, AMA 254, Advanced Mercury Analyzer according to ASTM, standard No. D-6722. Mercury concentration in saliva samples was analyzed by PERKIN-ELMER 3030 Cold Vapor Atomic Absorption Spectrophotometer. The mean {+-} SD mercury level in the women was 1.28 {+-} 1.38 {mu}g/g in hair and 4.14 {+-} 4.08 {mu}g/l in saliva; and there were positive correlation among them. A significant correlation was also observed between Hg level of saliva (Spearman's {rho} = 0.93, P < 0.001) and hair (Spearman's {rho} = 0.92, P < 0.001) with number of amalgam fillings. According to the results, we can conclude that amalgam fillings may be an effective source for high Hg concentration in hair and releasing the mercury to the saliva samples.

Evaluation of urine mercury level of dentists in Tehran and its influencial factors

Directory of Open Access Journals (Sweden)

Tabatabaei M.

2006-08-01

Full Text Available Background and Aim: Dentists are exposed to mercury from dental amalgam in their routine occupational practice. Excess exposure to mercury is harmful and the measurement of mercury content of urine is a reliable and valid assessment of the level of mercury exposure from dental amalgam. The aim of this study was the measurement of urine mercury in dentists of Tehran and assessment of some possible related factors. Materials and Methods: This cross-sectional study was performed randomly on 211 dentists in all regions in Tehran city (center, north, south, west, and east between 1381 and 1383. Dentists were asked to give a sample of urine in the day of visit and to complete a questionnaire consisting of variables such as age, working history, handling of amalgam, environmental parameters and general health situation. Urine samples were analyzed by cold vapour atomic absorption spectrophotometry. Data were analyzed by Kruskall Walis, Kendall and Mann Whitney tests, with p<0.05 as the limit of significance. Results: The mean of urine mercury content in Tehran dentists was 3.1 (± 3.95 which was lower than the international TLV (Threshold Limit Value. There was a significant relation between urine mercury level and working hours per day (P=0.006. This relation was observed with working hours per week too (P=0.006. In general dentists, there was a positive relation between urine mercury and age (0.008 as well as the practicing years (P=0.034. A significant relation was found between urine mercury and the number of amalgam repairs and replacements in restorative specialists (p=0.039. There was a significant relation between the number of amalgam fillings in the mouth and urine mercury in general practitioners (p=0.027. The type of amalgam (predosed capsules or bulk powder had a significant effect on the urine mercury content (P=0.001. There was no significant relation between urine mercury and other variables of the study such as the squeezing of

Scalp hair and saliva as biomarkers in determination of mercury levels in Iranian women: Amalgam as a determinant of exposure

International Nuclear Information System (INIS)

Fakour, H.; Esmaili-Sari, A.; Zayeri, F.

2010-01-01

The aim of this study was to determine the relationship between mercury concentrations in saliva and hair in women with amalgam fillings and its relation with age and number of amalgam fillings. Eighty-two hair and saliva samples were collected randomly from Iranian women who have the same fish consumption pattern and free from occupational exposures. The mean ± SD age of these women was 29.37 ± 8.12 (ranged from 20 to 56). The determination of Hg level in hair samples was carried out by the LECO, AMA 254, Advanced Mercury Analyzer according to ASTM, standard No. D-6722. Mercury concentration in saliva samples was analyzed by PERKIN-ELMER 3030 Cold Vapor Atomic Absorption Spectrophotometer. The mean ± SD mercury level in the women was 1.28 ± 1.38 μg/g in hair and 4.14 ± 4.08 μg/l in saliva; and there were positive correlation among them. A significant correlation was also observed between Hg level of saliva (Spearman's ρ = 0.93, P < 0.001) and hair (Spearman's ρ = 0.92, P < 0.001) with number of amalgam fillings. According to the results, we can conclude that amalgam fillings may be an effective source for high Hg concentration in hair and releasing the mercury to the saliva samples.

Glossary of Dental Terms

Science.gov (United States)

... more... Coffee and Doughnuts: A Disastrous Combo for Teeth? The sugars in doughnuts have been identified as ... More print this article enlarge text Glossary of Dental Terms Oral Health Defined Amalgam silver/mercury alloy ...

Dental amalgam and cognitive function in older women: findings from the Nun Study.

Science.gov (United States)

Saxe, S R; Snowdon, D A; Wekstein, M W; Henry, R G; Grant, F T; Donegan, S J; Wekstein, D R

1995-11-01

The authors determined the number and surface area of occlusal dental amalgams in a group of 129 Roman Catholic sisters who were 75 to 102 years of age. Findings from this study of women with relatively homogeneous adult lifestyles and environments suggest that existing amalgams are not associated with lower performance on eight different tests of cognitive function.

Mercury Toxicity and Treatment: A Review of the Literature

Science.gov (United States)

Bernhoft, Robin A.

2012-01-01

Mercury is a toxic heavy metal which is widely dispersed in nature. Most human exposure results from fish consumption or dental amalgam. Mercury occurs in several chemical forms, with complex pharmacokinetics. Mercury is capable of inducing a wide range of clinical presentations. Diagnosis of mercury toxicity can be challenging but can be obtained with reasonable reliability. Effective therapies for clinical toxicity have been described. PMID:22235210

Mercury Toxicity and Treatment: A Review of the Literature

Directory of Open Access Journals (Sweden)

Robin A. Bernhoft

2012-01-01

Full Text Available Mercury is a toxic heavy metal which is widely dispersed in nature. Most human exposure results from fish consumption or dental amalgam. Mercury occurs in several chemical forms, with complex pharmacokinetics. Mercury is capable of inducing a wide range of clinical presentations. Diagnosis of mercury toxicity can be challenging but can be obtained with reasonable reliability. Effective therapies for clinical toxicity have been described.

DMPS (DIMAVAL) as a challenge test to assess the mercury and arsenic body/kidney load in humans and as a treatment of mercury toxicity

Energy Technology Data Exchange (ETDEWEB)

Aposhian, H.V.; Maiorino, R.M.; Aposhian, M.M. [Univ. of Arizona, Tucson, AZ (United States); Hurlbut, K.M. [Rocky Mountain Poison Control Center, Denver, CO (United States)] [and others

1996-12-31

Mercury is an element which, with its compounds, is hazardous and is found in hazardous wastes. In Order to develop suitable diagnostic and therapeutic agents for mercury exposure, we have sought alternative test systems. We have used the chelating agent 2,3-dimercaptopropane-1-sulfonate (DMPS, DIMAVAL{reg_sign}) for estimating the body burden of mercury in normal humans and in dental personnel in a developing country, and for detoxifying humans with mercurous chloride exposure. Use of the DMPS-mercury challenge test has shown that two-thirds of the mercury excreted in the urine of volunteers with dental amalgams appears to be derived from the mercury vapor released from their amalgams. The DMPS challenge test (300 mg, by mouth, after an 11 hr fast) was useful for monitoring dental personnel for mercury vapor exposure. The DMPS challenge test was given to 11 factory workers who make a skin lotion that contains mercurous chloride, 8 users of the skin lotion, and 9 controls. The increases in urinary Hg resulting from the DMPS challenge were 45, 87, and 38-fold, respectively. The results demonstrate that in humans exposed to mercurous chloride, the DMPS-mercury challenge test is of value for a more realistic estimation of mobilizable Hg. DMPS should be considered for use to determine mercury body burdens and to treat humans exposed to mercury and its compounds via exposure to hazardous wastes. 42 refs., 2 figs., 5 tabs.

Mercury in human brain, blood, muscle and toenails in relation to exposure: an autopsy study

Directory of Open Access Journals (Sweden)

Morild Inge

2007-10-01

Full Text Available Abstract Background The main forms of mercury (Hg exposure in the general population are methylmercury (MeHg from seafood, inorganic mercury (I-Hg from food, and mercury vapor (Hg0 from dental amalgam restorations. While the distribution of MeHg in the body is described by a one compartment model, the distribution of I-Hg after exposure to elemental mercury is more complex, and there is no biomarker for I-Hg in the brain. The aim of this study was to elucidate the relationships between on the one hand MeHg and I-Hg in human brain and other tissues, including blood, and on the other Hg exposure via dental amalgam in a fish-eating population. In addition, the use of blood and toenails as biological indicator media for inorganic and organic mercury (MeHg in the tissues was evaluated. Methods Samples of blood, brain (occipital lobe cortex, pituitary, thyroid, abdominal muscle and toenails were collected at autopsy of 30 deceased individuals, age from 47 to 91 years of age. Concentrations of total-Hg and I-Hg in blood and brain cortex were determined by cold vapor atomic fluorescence spectrometry and total-Hg in other tissues by sector field inductively coupled plasma-mass spectrometry (ICP-SFMS. Results The median concentrations of MeHg (total-Hg minus I-Hg and I-Hg in blood were 2.2 and 1.0 μg/L, and in occipital lobe cortex 4 and 5 μg/kg, respectively. There was a significant correlation between MeHg in blood and occipital cortex. Also, total-Hg in toenails correlated with MeHg in both blood and occipital lobe. I-Hg in both blood and occipital cortex, as well as total-Hg in pituitary and thyroid were strongly associated with the number of dental amalgam surfaces at the time of death. Conclusion In a fish-eating population, intake of MeHg via the diet has a marked impact on the MeHg concentration in the brain, while exposure to dental amalgam restorations increases the I-Hg concentrations in the brain. Discrimination between mercury species is

Investigations of mercury concentrations in infant organs; Untersuchungen zur Quecksilberkonzentration in Organen von Kindern

Energy Technology Data Exchange (ETDEWEB)

Schlosser, C.

2001-07-01

Study of the mercury concentration of organs (kidneys, liver, brain, spleen, thyroid, pituitary gland, thymus) of 32 dead children, aged 0.1 - 15 years. Comparison with mercury concentration in adults. Emphasis is given on the role of dental amalgam. Study of age dependence of mercury contamination.

Cell death effects of resin-based dental material compounds and mercurials in human gingival fibroblasts

Energy Technology Data Exchange (ETDEWEB)

Reichl, Franz-Xaver [Walther-Straub-Institute of Pharmacology and Toxicology, Munich (Germany); Ludwig-Maximilians-University, Department of Operative Dentistry and Periodontology, Munich (Germany); Esters, Magali; Simon, Sabine; Seiss, Mario [Walther-Straub-Institute of Pharmacology and Toxicology, Munich (Germany); Kehe, Kai [Bundeswehr Institute of Pharmacology and Toxicology, Munich (Germany); Kleinsasser, Norbert [University of Regensburg, Head and Neck Surgery, Department of Otolaryngology, Regensburg (Germany); Folwaczny, Matthias; Glas, Juergen; Hickel, Reinhard [Ludwig-Maximilians-University, Department of Operative Dentistry and Periodontology, Munich (Germany)

2006-06-15

In order to test the hypothesis that released dental restorative materials can reach toxic levels in human oral tissues, the cytotoxicities of the resin-based dental (co)monomers hydroxyethylmethacrylate (HEMA), triethyleneglycoldimethacrylate (TEGDMA), urethanedimethacrylate (UDMA), and bisglycidylmethacrylate (BisGMA) compared with methyl mercury chloride (MeHgCl) and the amalgam component mercuric chloride (HgCl{sub 2}) were investigated on human gingival fibroblasts (HGF) using two different test systems: (1) the modified XTT-test and (2) the modified H 33342 staining assay. The HGF were exposed to various concentrations of the test-substances in all test systems for 24 h. All tested (co)monomers and mercury compounds significantly (P<0.05) decreased the formazan formation in the XTT-test. EC{sub 50} values in the XTT assay were obtained as half-maximum-effect concentrations from fitted curves. Following EC{sub 50} values were found (mean [mmol/l]; s.e.m. in parentheses; n=12; * significantly different to HEMA): HEMA 11.530 (0.600); TEGDMA* 3.460 (0.200); UDMA* 0.106 (0.005); BisGMA* 0.087 (0.001); HgCl{sub 2}* 0.013 (0.001); MeHgCl* 0.005 (0.001). Following relative toxicities were found: HEMA 1; TEGDMA 3; UDMA 109; BisGMA 133; HgCl{sub 2} 887; MeHgCl 2306. A significant (P<0.05) increase of the toxicity of (co)monomers and mercurials was found in the XTT-test in the following order: HEMA < TEGDMA < UDMA < BisGMA < HgCl{sub 2} < MeHgCl. TEGDMA and MeHgCl induced mainly apoptotic cell death. HEMA, UDMA, BisGMA, and HgCl{sub 2} induced mainly necrotic cell death. The results of this study indicate that resin composite components have a lower toxicity than mercury from amalgam in HGF. HEMA, BisGMA, UDMA, and HgCl{sub 2} induced mainly necrosis, but it is rather unlikely that eluted substances (solely) can reach concentrations, which might induce necrotic cell death in the human physiological situation, indicating that other (additional) factors may be involved in

Reference intervals of cadmium, lead, and mercury in blood, urine, hair, and nails among residents in Mansoura city, Nile Delta, Egypt

International Nuclear Information System (INIS)

Mortada, Waelin I.; Sobh, Mohamed A.; El-Defrawy, Mohamed M.; Farahat, Sami E.

2002-01-01

A random sample of 68 males and 25 females who reside in Mansoura city, Egypt, was examined for concentrations of cadmium, lead, and mercury in blood, urine, hair, and nails. The effect of gender and smoking on such levels was studied. The influence of dental amalgam on the levels of mercury in these biological samples were also examined. The results obtained show that only blood lead, which increased among males, was affected by gender. Blood levels of cadmium and lead as well as hair lead appeared to increase with smoking habit. Mercury levels in blood and urine were related to the presence of dental amalgam fillings. International comparisons between our results and the corresponding levels in other localities in the world showed that there ere environmentally related variations in terms of cadmium levels in hair, lead levels in blood, urine, hair, and nails, and mercury levels in blood, air, and nails. In conclusion, reference intervals of cadmium, lead, and mercury in the biological samples are environmentally related parameters. Some factors, such as gender, smoking habit, and the presence of dental amalgam fillings, may affect such levels and therefore should be considered

DETERMINATION OF TOTAL MERCURY IN FISH TISSUES USING PYROLYSIS ATOMIC ABSORPTION SPECTROMETRY WITH GOLD AMALGAMATION

Science.gov (United States)

A simple and rapid procedure for measuring total mercury in fish tissues is evaluated and compared with conventional techniques. Using an automated instrument incorporating combustion, preconcentration by amalgamation with gold, and atomic absorption spectrometry (AAS), mill...

Radioisotopes in the study of the adaptation of dental amalgam fillings

International Nuclear Information System (INIS)

Bermawi, A.

1995-02-01

Adaptation expresses the significance of the relationship between the dental filling and its cavity, and forms a special challenge for the dentist when he performs dental restorative procedures. Therefore, I have done a study on the adaptation of dental amalgam fillings and their marginal leakage using radioactive iodine (I sup 1 sup 3 sup 1) and radioactive carbon (C sup 1 sup 4) on three alloys: Viva cap-Contour-Sybraloy. Marginal leakage has been established by the use of I sup 1 sup 3 sup 1, and the leakage points located by C sup 1 sup 4, by means of radioautography. This study was carried out on: - 45 dental specimens to examine marginal leakage. - 9 dental specimens to examine the time of leakage as it reached the occlusal surface. - 6 dental specimens to examine the effect of lining the cavity walls with NO sup 3 Ag varnish on marginal leakage. - 5 dental specimens to examine the effect of form (bevel) of pulpal axial point angle on marginal leakage. - 3 dental specimens as controls. - 25 dental specimens for radioautography, and to determine leakage points. The following results were observed: - Leakage occurred around the contours of all fillings under study, and spread from their basal parts to the angle of their occlusal margin. - Quantitative increase of leakage with time. - The type of the alloy played an active role in determining the pattern of leakage. - Metallic amalgam alloys with spheroidal regular atoms showed the least leakage. - The occlusal sulci exhibited more leakage than the other parts. - Beveling the pulpal axial point angle decreased leakage. - Lining the cavity walls with NO sup 3 Ag varnish inhibited leakage. - The radioactive element, to which the specimens were exposed, was unable to infiltrated and penetrate dentinal and enamel tissues. (author). 55 refs, 52 figs., 68 tabs

Radioisotopes in the study of the adaptation of dental amalgam fillings

Energy Technology Data Exchange (ETDEWEB)

Bermawi, A [Atomic Energy Commission, Damascus (Syrian Arab Republic). Dept. of Radiation Protection and Nuclear Safety

1995-02-01

Adaptation expresses the significance of the relationship between the dental filling and its cavity, and forms a special challenge for the dentist when he performs dental restorative procedures. Therefore, I have done a study on the adaptation of dental amalgam fillings and their marginal leakage using radioactive iodine (I sup 1 sup 3 sup 1) and radioactive carbon (C sup 1 sup 4) on three alloys: Viva cap-Contour-Sybraloy. Marginal leakage has been established by the use of I sup 1 sup 3 sup 1, and the leakage points located by C sup 1 sup 4, by means of radioautography. This study was carried out on: - 45 dental specimens to examine marginal leakage. - 9 dental specimens to examine the time of leakage as it reached the occlusal surface. - 6 dental specimens to examine the effect of lining the cavity walls with NO sup 3 Ag varnish on marginal leakage. - 5 dental specimens to examine the effect of form (bevel) of pulpal axial point angle on marginal leakage. - 3 dental specimens as controls. - 25 dental specimens for radioautography, and to determine leakage points. The following results were observed: - Leakage occurred around the contours of all fillings under study, and spread from their basal parts to the angle of their occlusal margin. - Quantitative increase of leakage with time. - The type of the alloy played an active role in determining the pattern of leakage. - Metallic amalgam alloys with spheroidal regular atoms showed the least leakage. - The occlusal sulci exhibited more leakage than the other parts. - Beveling the pulpal axial point angle decreased leakage. - Lining the cavity walls with NO sup 3 Ag varnish inhibited leakage. - The radioactive element, to which the specimens were exposed, was unable to infiltrated and penetrate dentinal and enamel tissues. (author). 55 refs, 52 figs., 68 tabs.

Pollution status and mercury sedimentation in small river near amalgamation and cyanidation units of Talawaan-Tatelu gold mining, North Sulawesi

Directory of Open Access Journals (Sweden)

T M Palapa

2015-04-01

Full Text Available Information Journal Help User Username Password Remember me Notifications View Subscribe / Unsubscribe Search Keyword : The activities of traditional gold mining in the region of Talawaan-Tatelu, North Minahasa regency, North Sulawesi, have been ongoing since 1998. Processing the gold in the mine consists of three stages i.e., the excavation, milling and amalgamation, and the use of cyanide tanks. Waste from the processing units which contains high mercury, generally flows directly into small rivers nearby. This study aimed to determine the pollution status and mercury sedimentation in a small river near the amalgamation and cyanidation processing units in Talawaan-Tatelu gold mining. Water and sediment samples were taken from seven stations along a small river, as many as four temporal replications (weekly. Mercury determination in water and sediments was done by using Cold Vapor Atomic Fluorescence Spectrometry. Pollution status was determined through the calculation of Hg ratio in water samples and in water quality criterion (4th class, as noted in The Indonesian Government Regulation No. 82 of 2001 on Water Quality and Water Pollution Control, while the mercury sedimentation was calculated from the ratio of mercury in water and sediment. The results showed that there are differences in the status of pollution and mercury sedimentation of seven sampling stations. Amalgamation and cyanidation processing units provide significant impact on the status of pollution (although it is categorized in contamination and mercury sedimentation along small river in the gold mining area of Talawaan-Tatelu. The downstream of this small river, Talawaan River, is the main river of the Talawaan watershed. Things that should be a concern are Talawaan rural communities living near Talawaan River who often use the water for daily needs such as bathing and washing. Risk to public health around the river can arise when the status of pollution and mercury

Determination of mercury in dentists through Neutron activation analysis; Determinacion de mercurio en odontologos mediante Analisis por activacion neutronica

Energy Technology Data Exchange (ETDEWEB)

Padilla M, M.A.; Granados C, F. [Instituto Nacional de Investigaciones Nucleares, Departamento de Quimica, A.P. 18-1027, C.P. 11801 Mexico D.F. (Mexico)

2000-07-01

It was determined the mercury levels in urine through Neutron activation analysis to 25 dentists who have been exposed to mercury by several time periods, because of the routine manipulations of amalgams. The determined concentrations of mercury were less to 10 {mu} g Hg/l of urine. The results were founded inside the safety limits reported in the literature. The mercury levels in the dentists are associated with a wide variety of factors that contribute to their exposure as: number of years of dental practice, number of amalgams manipulated between others. (Author)

Patients’ experiences of changes in health complaints before, during, and after removal of dental amalgam

Directory of Open Access Journals (Sweden)

Therese T. Sjursen

2015-06-01

Full Text Available In this article, we explore how patients with health complaints attributed to dental amalgam experienced and gave meaning to changes in health complaints before, during, and after removal of all amalgam fillings. We conducted semistructured qualitative interviews with 12 participants from the treatment group in a Norwegian amalgam removal trial. Interviews took place within a couple months of the final follow-up 5 years after amalgam removal. Using the NVivo9 software, we conducted an explorative and reflective thematic analysis and identified the following themes: Something is not working: betrayed by the body, You are out there on your own, Not being sure of the importance of amalgam removal, The relief experienced after amalgam removal, and To accept, to give up, or to continue the search. We discuss the findings in the context of patients’ assigning meaning to illness experiences.

Changing patterns in the use, recycling, and material substitution of mercury in the United States

Science.gov (United States)

Wilburn, David R.

2013-01-01

the United States since 1992. In 1996, the three leading end-use sectors for mercury in the United States were chloralkali manufacturing (accounting for 38 percent of consumption), electrical and electronic instrumentation (13 percent of consumption), and instruments and measuring devices (11 percent of consumption). In 2010, the three leading end-use sectors were dental amalgam (accounting for between 35 and 57 percent of consumption), electrical and electronic instrumentation (29 percent of consumption), and batteries (8 percent of consumption). Mercury use in lighting is increasing because incandescent lights are being phased out in favor of mercury-containing compact fluorescent bulbs, but the demand for mercury per unit produced is small. Dental amalgam constituted the largest amount of mercury in use in the United States. One study reported about 290 t of mercury in dental amalgam was estimated to be contained in human mouths, an estimated 30 t of mercury amalgam was treated as waste, 28.5 t of mercury amalgam was released to the environment, 6 t of amalgam was recycled, and 3.5 t was treated and stored in landfills in 2009. Mercury contained in products recovered by State, municipal, or industry collection activities is recycled, but the estimated overall recycling rate is less than 10 percent. Increasingly, the U.S. mercury recycling industry has been processing a significant amount of mercury-containing material derived from foreign gold mining operations or decommissioned mercury-cell chloralkali plants. Regulation of mercury export and storage is expected to result in surplus mercury inventories in the United States. The Mercury Export Ban Act of 2008 limits elemental mercury exports for unregulated uses such as artisanal gold mining after January 1, 2013, and requires development of adequate long-term storage facilities in the United States for elemental mercury. During the past 4 years, producers and recyclers of elemental mercury have been exporting

Removal of mercury vapor from ambient air of dental clinics using an air cleaning system based on silver nanoparticles

Directory of Open Access Journals (Sweden)

Chiman Saeidi

2015-06-01

Full Text Available Background & objective: Mercury is a toxic and bio-accumulative pollutant that has adverse effects on environmental and human health. There have been a number of attempts to regulate mercury emissions tothe atmosphere. Silver nanoparticles are a number of materials that have highly potential to absorb mercury and formation of mercury amalgam.The aim of this study is removal of mercury vapors in the dental clinic using a n a ir cleaning system based on silver nanoparticles. Methods: In this study, silver nanoparticles coated on the bed of foam and chemical and structural properties were determined using a number of methods such as UV-VIS-NIR spectroscopy and Scanning Electron Microscope (SEM connected the X-ray Emission Spectroscopy Energy (EDS. The a ir cleaning system efficiency to remove of the mercury vapor in simulated conditions in the laboratory and real conditions in the dental clinicwere measured by Cold Vapor Atomic Absorption Spectroscopy (CVAAS. Results: The images of SEM, showed that average sizeof silver nanoparticles in colloidal solution was ∼ 30nm and distribution of silver nanoparticles coated on foam was good. EDS spectrum confirmed associated the presence of silver nanoparticles coated on foam. The significantly difference observed between the concentration of mercury vapor in the off state (9.43 ± 0.342 μg.m-3 and on state (0.51 ± 0.031μg.m-3 of the a ir cleaning system. The mercury vapor removal efficiencyof the a ir cleaning system was calculated 95%. Conclusion : The air cleaning system based on foam coated by silver nanoparticles, undertaken to provide the advantages such as use facilitating, highly efficient operational capacity and cost effective, have highly sufficiency to remove mercury vapor from dental clinics.

Nordic dentists' opinions on the safety of amalgam and other dental restorative materials.

Science.gov (United States)

Widström, E; Haugejorden, O; Sundberg, H; Birn, H

1993-08-01

The safety of amalgam and other restorative materials has caused concern among dental patients in recent years. The aim of this study was to obtain information on dentists' perceived competence in handling different filling materials and their opinions on the safety of these. A random sample of practising dentists in Denmark, Finland, Norway, and Sweden received a mail questionnaire in spring 1990. Answers were received from 1732 dentists (65%). The study showed that the respondents believed that their theoretic knowledge and clinical skills were generally at a high level regarding restorative materials. The risks of the side-effects of gold, ceramic materials, and glass ionomer were considered to be low by about 90% of the respondents. Amalgam was considered to be significantly more hazardous by the Swedish respondents than the others. Interestingly, composite was considered to be associated with a high risk of side-effects by about half of the dentists in all Nordic countries. The dentists' opinions were not found to be greatly influenced by their sex, age, or place of residence but rather by their country and service sector. Against the background of the present lack of scientific evidence on the hazardousness of amalgam or other restorative materials for patients' general health, these findings indicate that dentists are influenced by discussions in the mass media about dental treatment and materials and, of course, by the guidelines given by the health authorities in their own countries. Few dentists were shown to be concerned about occupational risks associated with the use of amalgam, and they had not had their own amalgam fillings replaced.(ABSTRACT TRUNCATED AT 250 WORDS)

Preparation and Properties of Mercury Film Electrodes on Solid Amalgam Surface

Czech Academy of Sciences Publication Activity Database

Josypčuk, Bohdan; Fojta, Miroslav; Barek, J.

2010-01-01

Roč. 22, 17-18 (2010), s. 1967-1973 ISSN 1040-0397. [International Conference on Modern Electroanalytical Methods. Prague, 09.12.2009-14.12.2009] R&D Projects: GA ČR GA203/07/1195; GA AV ČR IAA400400806; GA MŠk(CZ) LC06035 Institutional research plan: CEZ:AV0Z40400503; CEZ:AV0Z50040507; CEZ:AV0Z50040702 Keywords : voltammetry * solid and paste amalgam * Mercury film electrode Subject RIV: CG - Electrochemistry Impact factor: 2.721, year: 2010

Mercury in the South African environment

CSIR Research Space (South Africa)

Matooane, M

2009-11-01

Full Text Available ? Mercury, also known as quick silver, is ubiquitous in the environment ? Uses - Medical: medicines, thermometers, dental amalgam, etc. - Manufacturing industry: batteries, gold mining, chlorine production, cement production, etc. - Personal care.../day - Adult: >18 yrs - Child: 10 yrs Mercury Health Risks ? Freshwater Fish WMA Species Hazard Quotient Adult Child Berg Silverfish, Catfish; Yellowfish 1.44 ? 2.34 (0.03 ? 0.35) 1.27 ? 13.67 (1.20 ? 1.95) Upper Vaal Yellow fish Banded Tilapia 0...

Health and safety in the dental clinic - Hygiene regulations for use of elemental mercury in the protection of rights, safety and well-being of the patients, workers and the environment.

Science.gov (United States)

Ngim, Chunhan; Ngim, Allister Daquan

2013-12-01

The rules governing the use of metallic mercury, a toxic and hazardous chemical, is in most jurisdictions identical to widely accepted standards and practices for handling the same chemical in industry for the protection of humans and their work environment. There cannot be exceptions solely for the practitioner dentists and their patients. Any workplace must be safe for both workers and visitors. The latter being dental patients waiting in the dentist's work environment. We reviewed the literature for toxic health effects of elemental mercury upon humans and present information about the Minimata Convention convened by the United Nations Environment Programme. A study conducted among dentists in Singapore and their personal work environment almost 30 years ago contributed to the workplace standard for elemental mercury, which was reduced, and is still currently enforced as a global standard. We recommend that dentists, with a large alternative battery of restorative materials today, make selection of a restorative material a more seriously considered choice, and not to make use of amalgam without the proper use of personal protective equipment for themselves (members of the dental operating team) and their patients, (amalgam traps and judicious monitoring of their workplace air quality). Mercury is ubiquitous in our presence due to human activities; any reduction in the dentists' workplace contributes to a global reduction. © 2013 Published by Elsevier (Singapore) Pte Ltd.

Properties of amalgams made from lathe-cut, high Cu amalgam alloys.

Science.gov (United States)

Espevik, S

1980-01-01

Two alloys for dental amalgams made from lathe-cut powder with high Cu content have been developed. The alloys have been characterized with respect to physical properties and microstructure. The strongest amalgam exhibited minimal dimensional changes during setting and had low flow and creep values. It had the highest Cu content of the two amalgams investigated and no gamma 2 phase. The epsilon and eta' phases may dispersion-strenthen the amalgam which in compressive strength was comparable to the strongest amalgams available. A new mechanism for gamma 2 disappearance is suggested where Cu replaces Hg directly in the gamma 2 phase thus forming the eta' phase.

Association between History of Dental Amalgam Fillings and Risk of Parkinson's Disease: A Population-Based Retrospective Cohort Study in Taiwan.

Directory of Open Access Journals (Sweden)

Yung-Chuang Hsu

Full Text Available The impact of dental amalgam on the development of Parkinson's disease (PD is still uncertain, although a positive association between dental amalgam and PD has been found in a few case-control studies. The patients with amalgam fillings restored between 2000 and 2008 were identified by using the National Health Insurance Research Database (NHIRD in Taiwan. The same number of patients who had no new amalgam filling restored was matched by sex, age, and treatment date. Both cohorts were followed up from the treatment date until the date of diagnosis of PD, death, or the end of the year 2008. The individuals who received amalgam fillings had a significantly higher risk of PD afterward (adjusted hazard ratio [HR]=1.583, 95% confidence interval [CI]=1.122-2.234, p=0.0089 than those who did not. In the individuals who received amalgam fillings, being diagnosed with diabetes or hyperlipidemia demonstrated a significantly lower HR of PD occurrence than in the patients without diabetes or hyperlipidemia (HR=0.449, 95% CI=0.254-0.794, p=0.0059; HR=0.445, 95% CI=0.260-0.763, p=0.0032 after adjusting for comorbidities and Charlson-Deyo Comorbidity Index (CCI scores. Meanwhile, hypertension increased the hazard risk of PD (HR=1.645, 95% CI=1.098-2.464, p=0.0159. The patients exposed to dental amalgam fillings were 1.583 times more likely to have PD afterward compared to their non-exposed counterparts after adjusting for comorbidities and CCI scores.

The Management of Dental Waste in Dental Offices and Clinics in Shiraz, Southern Iran

Directory of Open Access Journals (Sweden)

M Danaei

2014-01-01

Full Text Available Background: Dental waste can be hazardous to humans and the environment. Objective: To determine the current status of dental waste management in private and public dental clinics and private dental offices in Shiraz, southern Iran. Methods: This cross-sectional study was conducted at the Shiraz University of Medical Sciences from February through June 2013. A stratified random sampling method was used to study 86 private offices, 14 private clinics and 10 public clinics. Types of waste studied included mercury and amalgam, lead foil packets, sharps, infectious tissues and fluids, pharmaceuticals and domestic waste materials. Compliance with established standards by the monitored dental offices and clinics and public clinics were compared. Results: 89.1% of dental offices and clinics disposed their infectious waste with domestic waste. Only 60% of centers used standard method for sharps disposal. None of the dental centers disposed their pharmaceutical waste and x-ray fixer waste by standard methods. Less than 10% of centers recycled the amalgam and lead foil pockets waste to the manufacture. Conclusion: Government agencies should establish monitoring programs for all dental offices and clinics to identify noncompliant activity and enforce recommended regulations.

Mercury and Other Biomedical Waste Management Practices among Dental Practitioners in India

Directory of Open Access Journals (Sweden)

Raghuwar D. Singh

2014-01-01

Full Text Available Objectives. The objective of the study was to assess the awareness and performance towards dental waste including mercury management policy and practices among the dental practitioners in North India. Materials and Methods. An epidemiologic survey was conducted among 200 private dental practitioners. The survey form was composed of 29 self-administered questions frame based on knowledge, attitude, and those regarding the practices of dentists in relation to dental health-care waste management. The resulting data were coded and a statistical analysis was done. Results and Discussion. About 63.7% of the dentists were not aware of the different categories of biomedical waste generated in their clinics. Only 31.9% of the dentists correctly said that outdated and contaminated drugs come under cytotoxic waste. 46.2% said they break the needle and dispose of it and only 21.9% use needle burner to destroy it. 45.0% of the dentists dispose of the developer and fixer solutions by letting them into the sewer, 49.4% of them dilute the solutions and let them into sewer and only 5.6% return them to the supplier. About 40.6% of the dentists dispose of excess silver amalgam by throwing it into common bin. Conclusion. It was concluded that not all dentists were aware of the risks they were exposed to and only half of them observe infection control practices.

Design and evaluation of a filter-based chairside amalgam separation system

Energy Technology Data Exchange (ETDEWEB)

Stone, Mark E. [Naval Institute for Dental and Biomedical Research, 310A B Street, Great Lakes, Illinois 60088 (United States)], E-mail: mark.stone@yahoo.com; Cohen, Mark E.; Berry, Denise L.; Ragain, James C. [Naval Institute for Dental and Biomedical Research, 310A B Street, Great Lakes, Illinois 60088 (United States)

2008-06-15

This study evaluated the ability of a chairside filtration system to remove particulate-based mercury (Hg) from dental-unit wastewater. Prototypes of the chairside filtration system were designed and fabricated using reusable filter chambers with disposable filter elements. The system was installed in five dental operatories utilizing filter elements with nominal pore sizes of 50{mu}m, 15{mu}m, 1{mu}m, 0.5{mu}m, or with no system installed (control). Daily chairside wastewater samples were collected on ten consecutive days from each room and brought to the laboratory for processing. After processing the wastewater samples, Hg concentrations were determined with cold vapor atomic absorption spectrometry (USEPA method 7470A). Filter systems were exchanged after ten samples were collected so that all five of the configurations were evaluated in each room (with assignment order balanced by a Latin Square). The numbers of surfaces of amalgam placed and removed per day were tracked in each room. In part two, new filter systems with the 0.5{mu}m filter elements were installed in the five dental operatories and vacuum levels at the high-velocity evacuation cannula tip were measured with a vacuum gauge. In part three of the study, the chairside filtration system utilizing 0.5{mu}m and 15{mu}m filter elements was evaluated utilizing the ISO 11143 testing protocol, a laboratory test of amalgam separator efficiency utilizing amalgam samples of known particle size distribution. Mean Hg per chair per day (no filter installed) was 1087.38mg (SD = 993.92mg). Mean Hg per chair per day for the 50{mu}m, 15{mu}m, 1{mu}m, 0.5{mu}m filter configurations was 79.13mg (SD = 71.40mg), 23.55mg (SD = 23.25mg), 17.68mg (SD = 17.35mg), and 4.25mg (SD = 6.35mg), respectively (n = 50 for all groups). Calculated removal efficiencies from the clinical samples were 92.7%, 97.8%, 98.4%, and 99.6%, respectively. ANCOVA on data from the four filter groups, with amalgam-surfaces-removed included as a

Study of complex amalgams containing alkali metals by method of broken thermometric titration

International Nuclear Information System (INIS)

Filippova, L.M.; Zebreva, A.I.; Espenbetov, A.A.

1977-01-01

Complex potassium-cadmium and sodium-cadmium amalgams containing different amounts of the alkali metal nad cadmium have been studied by thermometric titration with mercury. The experiments have been carried out in argon atmosphere at 25 deg C. As evidenced by the titration of sodium-cadmium amalgams, in the range of concentrations studied (Csub(Na)=0.71-2.95, Csub(Cd)=4.38-6.45 g-at/lHg) no solid phase is formed in them. Potassium-cadmium amalgams where the metals content is no higher than their individual solubility in mercury, display, when being mercury-titrated, negative heat effects due to solid phase formation. An estimation is made of the solid phase composition, its solubility in mercury and the heat of dissolution. The solid phase appearing in complex K-Cd amalgams is likely to contain K and Cd in a ratio 1:1 its conventional solubility product is 5.4 g-at/l Hg, and the heat of dissolution in mercury at 25 deg is -21 +-4 kJ/g-at

Evaluation of mercury levels in hair of children resident in artisanal gold mining area in the city of Chapada de Natividade-Tocantins

Energy Technology Data Exchange (ETDEWEB)

Mendes, Seyna Ueno R., E-mail: seynaueno@gmail.com [Universidade Federal do Tocantins (UFTO), Palmas,TO (Brazil). Coordenação de Medicina; Vasconcellos, Marina B.A.; Catharino, Marília Gabriela M., E-mail: mbvascon@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (CRPQ/IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro do Reator de Pesquisa; Quinaglia, Gilson A.; Held, Barbara, E-mail: gquinaglia@sp.gov.br [Companhia Ambiental do Estado de São Paulo (CETESB), São Paulo, SP (Brazil). Setor de Análises Toxicológicas

2017-07-01

The objective of the work is to evaluate the mercury exposure of children living in an artisanal gold mining area and in a control area, without mining. A cross-sectional study was conducted with children living in the municipalities of Chapada de Natividade and Porto Nacional, in the State of Tocantins, where hair samples were collected for laboratorial analysis of mercury concentrations, comparing between municipalities, gender, monthly fish consumption, profession of parents and the presence of amalgam in dental restorations. The hair samples were analyzed by the methods of neutron activation analysis and also by means of the DMA (Direct Mercury Analyzer) equipment, in the last case being a partnership with CETESB. There was no evidence of mercury-related diseases in the studied children. The mean concentration of mercury in children in Chapada de Natividade was significantly higher than in Porto Nacional. Children exposed to artisanal gold mining areas have higher concentrations of mercury than children living in non- artisanal gold mining areas. There was no significant relationship between mercury concentrations and gender, monthly fish consumption, parental profession and amalgam presence in dental restorations. The results suggest that the children living in an area exposed to mining experience greater environmental exposure to mercury, regardless of their eating habits or gender. (author)

Evaluation of mercury levels in hair of children resident in artisanal gold mining area in the city of Chapada de Natividade-Tocantins

International Nuclear Information System (INIS)

Mendes, Seyna Ueno R.; Vasconcellos, Marina B.A.; Catharino, Marília Gabriela M.; Quinaglia, Gilson A.; Held, Barbara

2017-01-01

The objective of the work is to evaluate the mercury exposure of children living in an artisanal gold mining area and in a control area, without mining. A cross-sectional study was conducted with children living in the municipalities of Chapada de Natividade and Porto Nacional, in the State of Tocantins, where hair samples were collected for laboratorial analysis of mercury concentrations, comparing between municipalities, gender, monthly fish consumption, profession of parents and the presence of amalgam in dental restorations. The hair samples were analyzed by the methods of neutron activation analysis and also by means of the DMA (Direct Mercury Analyzer) equipment, in the last case being a partnership with CETESB. There was no evidence of mercury-related diseases in the studied children. The mean concentration of mercury in children in Chapada de Natividade was significantly higher than in Porto Nacional. Children exposed to artisanal gold mining areas have higher concentrations of mercury than children living in non- artisanal gold mining areas. There was no significant relationship between mercury concentrations and gender, monthly fish consumption, parental profession and amalgam presence in dental restorations. The results suggest that the children living in an area exposed to mining experience greater environmental exposure to mercury, regardless of their eating habits or gender. (author)

Effects of amalgam corrosion products on human cells

Energy Technology Data Exchange (ETDEWEB)

Goldschmidt, P R; Cogen, R B; Taubman, S B [Departments of Periodontics and Pathology, University of Connecticut Health Center, Farmington, Connecticut, U.S.A.

1976-01-01

Using three independent criteria, we have found that 10/sup -4/,10/sup -6/M concentrations of ions presumably liberated from the corrosion of dental amalgam produce injurious effects on either human gingival fibroblasts or HeLa cells when the cells are grown in culture. Release of /sup 51/Cr and uptake of trypan blue dye were seen with 10/sup -5/M Hg/sup + +/ and Ag/sup +/. Inhibition of amino acid incorporation into protein-like material was seen with eluates of amalgam and with ionic solutions of most metals comprising dental amalgam. Stannous ion showed little if any cytotoxic potential. These results suggest that corrosion products of amalgam are capable of causing cellular injury or destruction.

Use of polished and mercury film-modified silver solid amalgam electrodes in electrochemical analysis of DNA

Czech Academy of Sciences Publication Activity Database

Fadrná, Renata; Cahová, Kateřina; Havran, Luděk; Josypčuk, Bohdan; Fojta, Miroslav

2005-01-01

Roč. 17, 5-6 (2005), s. 452-459 ISSN 1040-0397 R&D Projects: GA MPO 1H-PK/42; GA ČR GA203/04/1325; GA AV ČR KJB4004302 Institutional research plan: CEZ:AV0Z40400503; CEZ:AV0Z50040507 Keywords : DNA electrochemistry * solid amalgam electrodes * mercury film electrodes * DNA damage Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.189, year: 2005

Method for the removal and recovery of mercury

Science.gov (United States)

Easterly, Clay E.; Vass, Arpad A.; Tyndall, Richard L.

1997-01-01

The present invention is an enhanced method for the removal and recovery of mercury from mercury-contaminated matrices. The method involves contacting a mercury-contaminated matrix with an aqueous dispersant solution derived from specific intra-amoebic isolates to release the mercury from the mercury-contaminated matrix and emulsify the mercury; then, contacting the matrix with an amalgamating metal from a metal source to amalgamate the mercury to the amalgamating metal; removing the metallic source from the mercury-contaminated matrix; and heating the metallic source to vaporize the mercury in a closed system to capture the mercury vapors.

Cytotoxicity of dental composite (co)monomers and the amalgam component Hg{sup 2+} in human gingival fibroblasts

Energy Technology Data Exchange (ETDEWEB)

Reichl, Franz-Xaver; Simon, Sabine; Esters, Magalie; Seiss, Mario [Ludwig-Maximilians-University of Munich, Walther-Straub-Institute of Pharmacology and Toxicology, Munich (Germany); Kehe, Kai [Bundeswehr Institute of Pharmacology and Toxicology, Munich (Germany); Kleinsasser, Norbert [University of Regensburg, Department of Otolaryngology - Head and Neck Surgery, Regensburg (Germany); Hickel, Reinhard [Ludwig-Maximilians-University, Department of Operative Dentistry and Periodontology, Munich (Germany)

2006-08-15

Unpolymerized resin (co)monomers or mercury (Hg) can be released from restorative dental materials (e.g. composites and amalgam). They can diffuse into the tooth pulp or the gingiva. They can also reach the gingiva and organs by the circulating blood after the uptake from swallowed saliva. The cytotoxicity of dental composite components hydroxyethylmethacrylate (HEMA), triethyleneglycoldimethacrylate (TEGDMA), urethanedimethacrylate (UDMA), and bisglycidylmethacrylate (Bis-GMA) as well as the amalgam component Hg{sup 2+} (as HgCl{sub 2}) and methyl mercury chloride (MeHgCl) was investigated on human gingival fibroblasts (HGFs) at two time intervals. To test the cytotoxicity of substances, the bromodeoxyuridine (BrdU) assay and the lactate dehydrogenase (LDH) assay were used. The test substances were added in various concentrations and cells were incubated for 24 or 48 h. The EC{sub 50} values were obtained as half-maximum-effect concentrations from fitted curves. Following EC{sub 50} values were found [BrdU: mean (mmol/l); SEM in parentheses; n=12]: (24 h/48 h) HEMA 8.860 (0.440)/6.600(0.630), TEGDMA 1.810(0.130)/1.220(0.130), UDMA 0.120(0.010)/0.140(0.010), BisGMA 0.060(0.004)/0.040(0.002), HgCl{sub 2} 0.015(0.001)/0.050(0.006), and MeHgCl 0.004(0.001)/0.005(0.001). Following EC{sub 50} values were found [LDH: mean (mmol/l); SEM in parentheses; n=12]: (24 h/48 h) HEMA 9.490(0.300)/7.890(1.230), TEGDMA 2.300(0.470)/1.950(0.310), UDMA 0.200(0.007)/0.100(0.007), BisGMA 0.070(0.005)/0.100(0.002), and MeHgCl 0.014(0.006)/0.010(0.003). In both assays, the following range of increased toxicity was found for composite components (24 and 48 h): HEMA < TEGDMA < UDMA < BisGMA. In both assays, MeHgCl was the most toxic substance. In the BrdU assay, Hg{sup 2+} was about fourfold less toxic than MeHgCl but Hg{sup 2+} was about fourfold more toxic than BisGMA. In the BrdU test, a significantly (P<0.05) decreased toxicity was observed for Hg{sup 2+} at 48 h, compared to the 24 h

Performance of a gaseous detector based energy dispersive X-ray fluorescence imaging system: Analysis of human teeth treated with dental amalgam

International Nuclear Information System (INIS)

Silva, A.L.M.; Figueroa, R.; Jaramillo, A.; Carvalho, M.L.; Veloso, J.F.C.A.

2013-01-01

Energy dispersive X-ray fluorescence (EDXRF) imaging systems are of great interest in many applications of different areas, once they allow us to get images of the spatial elemental distribution in the samples. The detector system used in this study is based on a micro patterned gas detector, named Micro-Hole and Strip Plate. The full field of view system, with an active area of 28 × 28 mm 2 presents some important features for EDXRF imaging applications, such as a position resolution below 125 μm, an intrinsic energy resolution of about 14% full width at half maximum for 5.9 keV X-rays, and a counting rate capability of 0.5 MHz. In this work, analysis of human teeth treated by dental amalgam was performed by using the EDXRF imaging system mentioned above. The goal of the analysis is to evaluate the system capabilities in the biomedical field by measuring the drift of the major constituents of a dental amalgam, Zn and Hg, throughout the tooth structures. The elemental distribution pattern of these elements obtained during the analysis suggests diffusion of these elements from the amalgam to teeth tissues. - Highlights: • Demonstration of an EDXRF imaging system based on a 2D-MHSP detector for biological analysis • Evaluation of the drift of the dental amalgam constituents, throughout the teeth • Observation of Hg diffusion, due to hydroxyapatite crystal defects that compose the teeth tissues

Performance of a gaseous detector based energy dispersive X-ray fluorescence imaging system: Analysis of human teeth treated with dental amalgam

Energy Technology Data Exchange (ETDEWEB)

Silva, A.L.M. [I3N, Physics Dept, University of Aveiro, 3810-193 Aveiro (Portugal); Figueroa, R.; Jaramillo, A. [Physics Department, Universidad de La Frontera, Temuco (Chile); Carvalho, M.L. [Atomic Physics Centre, University of Lisbon, 1649-03 Lisboa (Portugal); Veloso, J.F.C.A., E-mail: joao.veloso@ua.pt [I3N, Physics Dept, University of Aveiro, 3810-193 Aveiro (Portugal)

2013-08-01

Energy dispersive X-ray fluorescence (EDXRF) imaging systems are of great interest in many applications of different areas, once they allow us to get images of the spatial elemental distribution in the samples. The detector system used in this study is based on a micro patterned gas detector, named Micro-Hole and Strip Plate. The full field of view system, with an active area of 28 × 28 mm{sup 2} presents some important features for EDXRF imaging applications, such as a position resolution below 125 μm, an intrinsic energy resolution of about 14% full width at half maximum for 5.9 keV X-rays, and a counting rate capability of 0.5 MHz. In this work, analysis of human teeth treated by dental amalgam was performed by using the EDXRF imaging system mentioned above. The goal of the analysis is to evaluate the system capabilities in the biomedical field by measuring the drift of the major constituents of a dental amalgam, Zn and Hg, throughout the tooth structures. The elemental distribution pattern of these elements obtained during the analysis suggests diffusion of these elements from the amalgam to teeth tissues. - Highlights: • Demonstration of an EDXRF imaging system based on a 2D-MHSP detector for biological analysis • Evaluation of the drift of the dental amalgam constituents, throughout the teeth • Observation of Hg diffusion, due to hydroxyapatite crystal defects that compose the teeth tissues.

Amalgam Contact Hypersensitivity Lesion: An Unusual Presentation ...

African Journals Online (AJOL)

Contact allergic reactions due to hypersensitivity to dental materials in professionals and ... Keywords: Amalgam, Amalgam contact hypersensitivity lesion, Lichenoid reaction, Oral mucosa ... was associated with mild burning sensation. The patient did ... OLLD in which oral and/or skin lesions appear in temporal association ...

Effect of environmental exposure to mercury on the functioning of the human body

Directory of Open Access Journals (Sweden)

Maciej Cyran

2013-09-01

Full Text Available Mercury is classified as a heavy metal and thus is commonly referred to as a death metal due to its high toxicity. In the environment it occurs in metallic form or in combination with other compounds. Amidst the sources of exposure to mercury, the most important environmental sources are dental amalgam and mercury vapor from the production of chlorine which is the most important source of occupational exposure. Mercury is easily soluble in fats, so it penetrates through biological membranes. Both - acute and chronic mercury poisoning causes characteristic clinical symptoms. There are several connections between exposure to this metal and toxic effects on the nervous system, cardiovascular system, endocrine system and kidneys. Thus mercury damages the structure of many organs and impairs their function

Urban artisanal gold shops and mercury emissions

International Nuclear Information System (INIS)

Cordy, P.; Veiga, M.; Carrasco, V.H.G.

2008-01-01

Artisanal miners in developing countries use mercury amalgamation processes to extract gold. The amalgams are then refined before being sold on to urban gold shops. The amalgams can often contain between 2 to 40 per cent mercury. Unburned amalgams are also often sold directly to gold shops. There are serious health risks for shop employees and nearby populations when the gold is melted and further purified. Studies have shown that mercury concentrations in the ambient air of gold shops often exceeds World Health Organization (WHO) limits by an order of magnitude or more. This study examined the practices and technologies used to refine gold in Latin America and Indonesia. The study compared and contrasted various refining methods and their resulting mercury emissions. Methods of reducing mercury emissions were also investigated, including a filtration system designed to capture 80 per cent of mercury emissions. Barriers to implementing mercury emissions reduction plans were also investigated. It was concluded that the design of urban gold shops must include condensers, fume hoods, and efficient mercury capture systems. 15 refs

Novel Amalgams for In-Space Fabrication of Replacement Parts

Science.gov (United States)

Cochran, Calvin T.; Van Hoose, James R.; Grugel, R. N.

2012-01-01

Being able to fabricate replacement parts during extended space flight missions precludes the weight, storage volume, and speculation necessary to accommodate spares. Amalgams, widely used in dentistry, are potential candidates for fabricating parts in microgravity environments as they are moldable, do not require energy for melting, and do not pose fluid handling problems. Unfortunately, amalgams have poor tensile strength and the room temperature liquid component is mercury. To possibly resolve these issues a gallium-indium alloy was substituted for mercury and small steel fibers were mixed in with the commercial alloy powder. Subsequent microscopic examination of the novel amalgam revealed complete bonding of the components, and mechanical testing of comparable samples showed those containing steel fibers to have a significant improvement in strength. Experimental procedures, microstructures, and test results are presented and discussed in view of further improving properties.

Mercury emissions inventory for 2014 in Costa Rica using the PNUMA Toolkit to a N2 level

Directory of Open Access Journals (Sweden)

Julio César Murillo-Hernández

2017-12-01

Full Text Available The Minamata Convention was signed in October 2013 to protect human health and the environment from releases and anthropogenic emissions of elemental mercury and compounds containing this element.  When Costa Rica ratified this instrument, the country committed to develop and keep updated an inventory of emissions from the relevant sources of mercury. In the present work, the tool proposed by UNEP was used to generate the first mercury inventory at the N2 level of the country, which considers releases of mercury in air, water, soil, product and waste matrices. Taking 2014 as the reference year, the estimated mercury emission for Costa Rica was recorded at 5 052 kg, with an uncertainty interval between 2 675 kg and 10 525 kg; and the most important sectors in terms of the total emission were the extraction of gold with amalgamation (42 %, informal burning of waste (15 % and use of dental amalgams (10 %. The most impacted matrices were air (29 %, water (28 % and soil (21 %, respectively.

Methylmercury and elemental mercury differentially associate with blood pressure among dental professionals

Science.gov (United States)

Goodrich, Jaclyn M.; Wang, Yi; Gillespie, Brenda; Werner, Robert; Franzblau, Alfred; Basu, Niladri

2013-01-01

Methylmercury-associated effects on the cardiovascular system have been documented though discrepancies exist, and most studied populations experience elevated methylmercury exposures. No paper has investigated the impact of low-level elemental (inorganic) mercury exposure on cardiovascular risk in humans. The purpose of this study was to increase understanding of the association between mercury exposure (methylmercury and elemental mercury) and blood pressure measures in a cohort of dental professionals that experience background exposures to both mercury forms. Dental professionals were recruited during the 2010 Michigan Dental Association Annual Convention. Mercury levels in hair and urine samples were analyzed as biomarkers of methylmercury and elemental mercury exposure, respectively. Blood pressure (systolic, diastolic) was measured using an automated device. Distribution of mercury in hair (mean, range: 0.45, 0.02–5.18 μg/g) and urine (0.94, 0.03–5.54 μg/L) correspond well with the US National Health and Nutrition Examination Survey. Linear regression models revealed significant associations between diastolic blood pressure (adjusted for blood pressure medication use) and hair mercury (n = 262, p = 0.02). Urine mercury results opposed hair mercury in many ways. Notably, elemental mercury exposure was associated with a significant systolic blood pressure decrease (n = 262, p = 0.04) that was driven by the male population. Associations between blood pressure and two forms of mercury were found at exposure levels relevant to the general population, and associations varied according to type of mercury exposure and gender. PMID:22494934

A Safe Protocol for Amalgam Removal

Directory of Open Access Journals (Sweden)

Dana G. Colson

2012-01-01

Full Text Available Today's environment has different impacts on our body than previous generations. Heavy metals are a growing concern in medicine. Doctors and individuals request the removal of their amalgam (silver mercury restorations due to the high mercury content. A safe protocol to replace the silver mercury filling will ensure that there is minimal if any absorption of materials while being removed. Strong alternative white composite and lab-processed materials are available today to create a healthy and functioning mouth. Preparation of the patient prior to the procedure and after treatment is vital to establish the excretion of the mercury from the body.

Evaluating the Reasons of Amalgam Restoration Replacement in Esthetic and Restorative Department of Babol Dental School in 2013-14

Directory of Open Access Journals (Sweden)

F Abolghasemzade

2015-08-01

Results: Within 263 patients, there were 81(30.8% men and 182(69.2% women. Most patients aged 30-40(42.2%, and were reported to suffer from class Ι dental occlusion(92.4%.The mean DMF was 9.7±2.4 . Lower molars were demonstrated as the most frequent teeth group for replacing amalgam restorations as well as causing secondary caries. Furthermore, secondary caries involved the major causes of amalgam restoration replacement. The most prevalent class for amalgam restoration replacement was class II restorations. It should be noted that secondary caries were most prevalent within class II MO / DO(25 cases(44.6%. Conclusion: The study findings revealed that the most common cause of the restoration replacement involved the secondary caries which was most observed in the Class II restorations.

Development and Validation of a Prototype Vacuum Sensing Unit for the DD2011 Chairside Amalgam Separators

Science.gov (United States)

2015-10-30

amalgam separators , such as the DD2011, remove amalgam waste particulates by filtration and are attached to the vacuum system of dental chairs for...based upon the principle that solid particulate amalgam waste and dental debris accumulate and block the movement of water through the filtration...AMALGAM SEPARATORS JAY SHARTZER, B.S., SOPHIA JOHNSON, PH.D., AND AMBER NAGY, PH.D. CRANIOFACIAL HEALTH AND RESTORATIVE MEDICINE BIOMATERIALS AND

Increased Mercury Levels in Patients with Celiac Disease following a Gluten-Free Regimen

Directory of Open Access Journals (Sweden)

Luca Elli

2015-01-01

Full Text Available Background and Aim. Although mercury is involved in several immunological diseases, nothing is known about its implication in celiac disease. Our aim was to evaluate blood and urinary levels of mercury in celiac patients. Methods. We prospectively enrolled 30 celiac patients (20 treated with normal duodenal mucosa and 10 untreated with duodenal atrophy and 20 healthy controls from the same geographic area. Blood and urinary mercury concentrations were measured by means of flow injection inductively coupled plasma mass spectrometry. Enrolled patients underwent dental chart for amalgam fillings and completed a food-frequency questionnaire to evaluate diet and fish intake. Results. Mercury blood/urinary levels were 2.4±2.3/1.0±1.4, 10.2±6.7/2.2±3.0 and 3.7±2.7/1.3±1.2 in untreated CD, treated CD, and healthy controls, respectively. Resulting mercury levels were significantly higher in celiac patients following a gluten-free diet. No differences were found regarding fish intake and number of amalgam fillings. No demographic or clinical data were significantly associated with mercury levels in biologic samples. Conclusion. Data demonstrate a fourfold increase of mercury blood levels in celiac patients following a gluten-free diet. Further studies are needed to clarify its role in celiac mechanism.

Process Optimization for Valuable Metal Recovery from Dental Amalgam Residues

Directory of Open Access Journals (Sweden)

C.M. Parra–Mesa

2009-07-01

Full Text Available In this paper, the methodology used for optimizing leaching in a semi pilot plant is presented. This leaching process was applied to recover value metals from dental amalgam residues. 23 factorial design was used to characterize the process during the first stage and in the second one, a central compound rotational design was used for modeling copper percentage dissolved, a function of the nitric acid concentration, leaching time and temperature. This model explained the 81% of the response variability, which is considered satisfactory given the complexity of the process kinetics and, furthermore, it allowed the definition of the operation conditions for better copper recovery, which this was of 99.15%, at a temperature of 55°C, a concentration of 30% by weight and a time of 26 hours.

Oral and dental affections in mercury-exposed workers

Energy Technology Data Exchange (ETDEWEB)

Fahmy, M.S.

1978-07-01

A total of 222 mercury-exposed workers in the Chlor-Alkali plant in Kuwait were investigated for oral and dental affections. The levels of mercury-vapor ranged from 566.6 microgram/m3 to 0.3 microgram/m3 in different parts of the factory. The periods of exposure varied from 1 to 11 years. Although the level of mercury vapor in the air and the period of exposure proved to be the main factors as regards the oral signs and symptoms, the oral hygiene condition and the individual sensitivity played substantial roles. Oral affections were found not to be due to allergy to mercury.

Performance of a gaseous detector based energy dispersive X-ray fluorescence imaging system: Analysis of human teeth treated with dental amalgam

Science.gov (United States)

Silva, A. L. M.; Figueroa, R.; Jaramillo, A.; Carvalho, M. L.; Veloso, J. F. C. A.

2013-08-01

Energy dispersive X-ray fluorescence (EDXRF) imaging systems are of great interest in many applications of different areas, once they allow us to get images of the spatial elemental distribution in the samples. The detector system used in this study is based on a micro patterned gas detector, named Micro-Hole and Strip Plate. The full field of view system, with an active area of 28 × 28 mm2 presents some important features for EDXRF imaging applications, such as a position resolution below 125 μm, an intrinsic energy resolution of about 14% full width at half maximum for 5.9 keV X-rays, and a counting rate capability of 0.5 MHz. In this work, analysis of human teeth treated by dental amalgam was performed by using the EDXRF imaging system mentioned above. The goal of the analysis is to evaluate the system capabilities in the biomedical field by measuring the drift of the major constituents of a dental amalgam, Zn and Hg, throughout the tooth structures. The elemental distribution pattern of these elements obtained during the analysis suggests diffusion of these elements from the amalgam to teeth tissues.

Target-induced formation of gold amalgamation on DNA-based sensing platform for electrochemical monitoring of mercury ion coupling with cycling signal amplification strategy

International Nuclear Information System (INIS)

Chen, Jinfeng; Tang, Juan; Zhou, Jun; Zhang, Lan; Chen, Guonan; Tang, Dianping

2014-01-01

Graphical abstract: -- Highlights: •We report a new electrochemical sensing protocol for the detection of mercury ion. •Gold amalgamation on DNA-based sensing platform was used as nanocatalyst. •The signal was amplified by cycling signal amplification strategy. -- Abstract: Heavy metal ion pollution poses severe risks in human health and environmental pollutant, because of the likelihood of bioaccumulation and toxicity. Driven by the requirement to monitor trace-level mercury ion (Hg 2+ ), herein we construct a new DNA-based sensor for sensitive electrochemical monitoring of Hg 2+ by coupling target-induced formation of gold amalgamation on DNA-based sensing platform with gold amalgamation-catalyzed cycling signal amplification strategy. The sensor was simply prepared by covalent conjugation of aminated poly-T (25) oligonucleotide onto the glassy carbon electrode by typical carbodiimide coupling. Upon introduction of target analyte, Hg 2+ ion was intercalated into the DNA polyion complex membrane based on T–Hg 2+ –T coordination chemistry. The chelated Hg 2+ ion could induce the formation of gold amalgamation, which could catalyze the p-nitrophenol with the aid of NaBH 4 and Ru(NH 3 ) 6 3+ for cycling signal amplification. Experimental results indicated that the electronic signal of our system increased with the increasing Hg 2+ level in the sample, and has a detection limit of 0.02 nM with a dynamic range of up to 1000 nM Hg 2+ . The strategy afforded exquisite selectivity for Hg 2+ against other environmentally related metal ions. In addition, the methodology was evaluated for the analysis of Hg 2+ in spiked tap-water samples, and the recovery was 87.9–113.8%

Biomarkers of mercury exposure at a mercury recycling facility in Ukraine.

Science.gov (United States)

Gibb, Herman Jones; Kozlov, Kostj; Buckley, Jessie Poulin; Centeno, Jose; Jurgenson, Vera; Kolker, Allan; Conko, Kathryn; Landa, Edward; Panov, Boris; Panov, Yuri; Xu, Hanna

2008-08-01

This study evaluates biomarkers of occupational mercury exposure among workers at a mercury recycling operation in Gorlovka, Ukraine. The 29 study participants were divided into three occupational categories for analysis: (1) those who worked in the mercury recycling operation (Group A, n = 8), (2) those who worked at the facility but not in the yard where the recycling was done (Group B, n = 14), and (3) those who did not work at the facility (Group C, n = 7). Urine, blood, hair, and nail samples were collected from the participants, and a questionnaire was administered to obtain data on age, gender, occupational history, smoking, alcohol consumption, fish consumption, tattoos, dental amalgams, home heating system, education, source of drinking water, and family employment in the former mercury mine/smelter located on the site of the recycling facility. Each factor was tested in a univariate regression with total mercury in urine, blood, hair, and nails. Median biomarker concentrations were 4.04 microg/g-Cr (urine), 2.58 microg/L (blood), 3.95 microg/g (hair), and 1.16 microg/g (nails). Occupational category was significantly correlated (p recycling operation had the highest blood and urinary mercury levels. Those who worked at the facility but were not directly involved with the recycling operation had higher levels than those who did not work at the facility.

Amalgamation based optical and colorimetric sensing of mercury(II) ions with silver graphene oxide nanocomposite materials

International Nuclear Information System (INIS)

Kamali, Khosro Zangeneh; Pandikumar, Alagarsamy; Jayabal, Subramaniam; Huang, Nay Ming; Ramaraj, Ramasamy; Lim, Hong Ngee; Ong, Boon Hoong; Bien, Chia Sheng Daniel; Kee, Yeh Yee

2016-01-01

The article describes a facile method for the preparation of a conjugate composed of silver nanoparticles and graphene oxide (Ag GO) via chemical reduction of silver precursors in the presence of graphene oxide (GO) while sonicating the solution. The Ag GO was characterized by X-ray photoelectron spectroscopy, X-ray powder diffraction, and energy-dispersive X-ray spectroscopy. The nanocomposite undergoes a color change from yellow to colorless in presence of Hg(II), and this effect is based on the disappearance of the localized surface plasmon resonance absorption of the AgNPs due to the formation of silver-mercury amalgam. The presence of GO, on the other hand, prevents the agglomeration of the AgNPs and enhances the stability of the nanocomposite material in solution. Hence, the probe represents a viable optical probe for the determination of mercury(II) ions in that it can be used to visually detect Hg(II) concentrations as low as 100 μM. The instrumental LOD is 338 nM. (author)

Analysis of mercury and selenium in biological samples by neutron activation analysis

International Nuclear Information System (INIS)

Catharino, Marilia Gabriela Miranda

2002-01-01

In the present work, hair samples from populations suspected of contamination by mercury, in the localities of Serra do Navio, Vila Nova and Tartarugalzinho, in the State of Amapa, were analyzed. Hair samples of children under odontopediatric treatment were also analyzed for mercury, in order to study the possibility of transfer of mercury from the dental amalgam and also to obtain data of hair mercury in a control population of children. Another step of the work was the development of a method for the determination of selenium, by using the short-lived radioisotope 77 mSe. After the certification of the method it was applied to the analysis of hair, nails and a vitamin supplement. A comparison was made with the results obtain ed by using the long-lived radioisotope of selenium, 75 Se. The results obtained for mercury in the hair samples of populations living in the State of Amapa have shown that the mercury concentrations in these populations are much higher than in the controls. As for the hair samples of children under treatment with mercury amalgam, no significant differences were found in the concentrations of mercury after the treatment. On the other hand, these data were important to obtain data for a control population of children. The results obtained by using the radioisotope 77 mSe showed that the method developed was suitable for the analyzed matrixes and the results were similar to the ones obtained by employing the usual AANI method, with the radioisotope 75 Se. (author)

Mercury emission from crematories in Japan

Directory of Open Access Journals (Sweden)

M. Takaoka

2010-04-01

Full Text Available Anthropogenic sources of mercury emissions have a significant impact on global pollution. Therefore, finding uncharacterised sources and assessing the emissions from these sources are important. However, limited data are available worldwide on mercury emissions from crematories. In Japan, 99.9% of dead bodies are cremated, which is the highest percentage in the world, and more than 1600 crematories are in operation. We thus focused on emissions from crematories in Japan. The number of targeted facilities was seven, and we used continuous emission monitoring to measure the mercury concentrations and investigate mercury behaviour. The total mercury concentrations in stack gases were a few μg/Nm³ (normal cubic meters. Considering the time profile of mercury and its species in cremations, the findings confirmed that the mercury in stack gas originated from dental amalgam. The amount of mercury emissions was calculated using the total concentration and gas flow rate. Furthermore, the annual amount of mercury emission from crematories in Japan was estimated by using the total number of corpses. The emission amount was considerably lower than that estimated in the United Kingdom. From statistical analyses on population demographics and measurements, future total emissions from crematories were also predicted. As a result, the amount of mercury emitted by crematories will likely increase by 2.6-fold from 2007 to 2037.

Hair mercury and urinary cadmium levels in Belgian children and their mothers within the framework of the COPHES/DEMOCOPHES projects

International Nuclear Information System (INIS)

Pirard, Catherine; Koppen, Gudrun; De Cremer, Koen; Van Overmeire, Ilse; Govarts, Eva; Dewolf, Marie-Christine; Van De Mieroop, Els; Aerts, Dominique; Biot, Pierre; Casteleyn, Ludwine; Kolossa-Gehring, Marike; Schwedler, Gerda

2014-01-01

A harmonized human biomonitoring pilot study was set up within the frame of the European projects DEMOCOPHES and COPHES. In 17 European countries, biomarkers of some environmental pollutants, including urinary cadmium and hair mercury, were measured in children and their mothers in order to obtain European-wide comparison values on these chemicals. The Belgian participant population consisted in 129 school children (6–11 years) and their mothers (≤ 45 years) living in urban or rural areas of Belgium. The geometric mean levels for mercury in hair were 0.383 μg/g and 0.204 μg/g for respectively mothers and children. Cadmium in mother's and children's urine was detected at a geometric mean concentration of respectively 0.21 and 0.04 μg/l. For both biomarkers, levels measured in the mothers and their child were correlated. While the urinary cadmium levels increased with age, no trend was found for hair mercury content, except the fact that mothers hold higher levels than children. The hair mercury content increased significantly with the number of dental amalgam fillings, explaining partially the higher levels in the mothers by their higher presence rate of these amalgams compared to children. Fish or seafood consumption was the other main parameter determining the mercury levels in hair. No relationship was found between smoking status and cadmium or mercury levels, but the studied population included very few smokers. Urinary cadmium levels were higher in both mothers and children living in urban areas, while for mercury this difference was only significant for children. Our small population showed urinary cadmium and hair mercury levels lower than the health based guidelines suggested by the WHO or the JECFA (Joint FAO/WHO Expert Committee on Food Additives). Only 1% had cadmium level slightly higher than the German HBM-I value (1 μg/l for adults), and 9% exceeded the 1 μg mercury/g hair suggested by the US EPA. - Highlights: • Hair mercury and urinary

Hair mercury and urinary cadmium levels in Belgian children and their mothers within the framework of the COPHES/DEMOCOPHES projects

Energy Technology Data Exchange (ETDEWEB)

Pirard, Catherine, E-mail: c.pirard@chu.ulg.ac.be [CHU of Liege, Laboratory of Clinical, Forensic and Environmental Toxicology, CHU (B35), 4000 Liege (Belgium); Koppen, Gudrun, E-mail: gudrun.koppen@vito.be [Flemish Institute of Technological Research, Environmental Risk and Health Unit, Boeretang 200, 2400 Mol (Belgium); De Cremer, Koen, E-mail: Koen.DeCremer@wiv-isp.be [Scientific Institute of Public Health, Juliette Wytsmanstraat 14, 1050 Brussels (Belgium); Van Overmeire, Ilse, E-mail: ilse.vanovermeire@wiv-isp.be [Scientific Institute of Public Health, Juliette Wytsmanstraat 14, 1050 Brussels (Belgium); Govarts, Eva, E-mail: eva.govarts@vito.be [Flemish Institute of Technological Research, Environmental Risk and Health Unit, Boeretang 200, 2400 Mol (Belgium); Dewolf, Marie-Christine, E-mail: marie_christine.dewolf@hainaut.be [Provincial Institute Hainaut Vigilance Sanitaire — Hainaut Hygiène Publique en (HVS-HPH), Boulevard Sainctelette, 55, 7000 Mons (Belgium); Van De Mieroop, Els, E-mail: Els.VanDeMieroop@pih.provant.be [Provincial Institute for Hygiene (PIH), Boomgaardstraat 22 bus 1, 2600 Antwerpen (Belgium); Aerts, Dominique, E-mail: dominique.aerts@milieu.belgie.be [Federal Public Service Health, Food Chain Safety and Environment, Place Victor Horta 40/10, 1060 Brussels (Belgium); Biot, Pierre, E-mail: pierre.biot@environnement.belgique.be [Federal Public Service Health, Food Chain Safety and Environment, Place Victor Horta 40/10, 1060 Brussels (Belgium); Casteleyn, Ludwine, E-mail: Ludwine.Casteleyn@med.kuleuven.be [University of Leuven, Center for Human Genetics, Herestraat 49, 3000 Leuven (Belgium); Kolossa-Gehring, Marike, E-mail: marike.kolossa@uba.de [Federal Environment Agency, Corrensplatz 1, 14195 Berlin (Germany); Schwedler, Gerda, E-mail: Gerda.Schwedler@uba.de [Federal Environment Agency, Corrensplatz 1, 14195 Berlin (Germany); and others

2014-02-01

A harmonized human biomonitoring pilot study was set up within the frame of the European projects DEMOCOPHES and COPHES. In 17 European countries, biomarkers of some environmental pollutants, including urinary cadmium and hair mercury, were measured in children and their mothers in order to obtain European-wide comparison values on these chemicals. The Belgian participant population consisted in 129 school children (6–11 years) and their mothers (≤ 45 years) living in urban or rural areas of Belgium. The geometric mean levels for mercury in hair were 0.383 μg/g and 0.204 μg/g for respectively mothers and children. Cadmium in mother's and children's urine was detected at a geometric mean concentration of respectively 0.21 and 0.04 μg/l. For both biomarkers, levels measured in the mothers and their child were correlated. While the urinary cadmium levels increased with age, no trend was found for hair mercury content, except the fact that mothers hold higher levels than children. The hair mercury content increased significantly with the number of dental amalgam fillings, explaining partially the higher levels in the mothers by their higher presence rate of these amalgams compared to children. Fish or seafood consumption was the other main parameter determining the mercury levels in hair. No relationship was found between smoking status and cadmium or mercury levels, but the studied population included very few smokers. Urinary cadmium levels were higher in both mothers and children living in urban areas, while for mercury this difference was only significant for children. Our small population showed urinary cadmium and hair mercury levels lower than the health based guidelines suggested by the WHO or the JECFA (Joint FAO/WHO Expert Committee on Food Additives). Only 1% had cadmium level slightly higher than the German HBM-I value (1 μg/l for adults), and 9% exceeded the 1 μg mercury/g hair suggested by the US EPA. - Highlights: • Hair mercury and

Target-induced formation of gold amalgamation on DNA-based sensing platform for electrochemical monitoring of mercury ion coupling with cycling signal amplification strategy

Energy Technology Data Exchange (ETDEWEB)

Chen, Jinfeng; Tang, Juan; Zhou, Jun; Zhang, Lan; Chen, Guonan; Tang, Dianping, E-mail: dianping.tang@fzu.edu.cn

2014-01-31

Graphical abstract: -- Highlights: •We report a new electrochemical sensing protocol for the detection of mercury ion. •Gold amalgamation on DNA-based sensing platform was used as nanocatalyst. •The signal was amplified by cycling signal amplification strategy. -- Abstract: Heavy metal ion pollution poses severe risks in human health and environmental pollutant, because of the likelihood of bioaccumulation and toxicity. Driven by the requirement to monitor trace-level mercury ion (Hg{sup 2+}), herein we construct a new DNA-based sensor for sensitive electrochemical monitoring of Hg{sup 2+} by coupling target-induced formation of gold amalgamation on DNA-based sensing platform with gold amalgamation-catalyzed cycling signal amplification strategy. The sensor was simply prepared by covalent conjugation of aminated poly-T{sub (25)} oligonucleotide onto the glassy carbon electrode by typical carbodiimide coupling. Upon introduction of target analyte, Hg{sup 2+} ion was intercalated into the DNA polyion complex membrane based on T–Hg{sup 2+}–T coordination chemistry. The chelated Hg{sup 2+} ion could induce the formation of gold amalgamation, which could catalyze the p-nitrophenol with the aid of NaBH{sub 4} and Ru(NH{sub 3}){sub 6}{sup 3+} for cycling signal amplification. Experimental results indicated that the electronic signal of our system increased with the increasing Hg{sup 2+} level in the sample, and has a detection limit of 0.02 nM with a dynamic range of up to 1000 nM Hg{sup 2+}. The strategy afforded exquisite selectivity for Hg{sup 2+} against other environmentally related metal ions. In addition, the methodology was evaluated for the analysis of Hg{sup 2+} in spiked tap-water samples, and the recovery was 87.9–113.8%.

A 24-month evaluation of amalgam and resin-based composite restorations

DEFF Research Database (Denmark)

McCracken, Michael S; Gordan, Valeria V; Litaker, Mark S

2013-01-01

Knowing which factors influence restoration longevity can help clinicians make sound treatment decisions. The authors analyzed data from The National Dental Practice-Based Research Network to identify predictors of early failures of amalgam and resin-based composite (RBC) restorations.......Knowing which factors influence restoration longevity can help clinicians make sound treatment decisions. The authors analyzed data from The National Dental Practice-Based Research Network to identify predictors of early failures of amalgam and resin-based composite (RBC) restorations....

Phase composition of rapidly solidified Ag-Sn-Cu dental alloys

International Nuclear Information System (INIS)

Lecong Dzuong; Do Minh Nghiep; Nguyen van Dzan; Cao the Ha

1996-01-01

The phase composition of some rapidly solidified Ag-Sn-Cu dental alloys with different copper contents (6.22 wtpct) has been studied by XRD, EMPA and optical microscopy. The samples were prepared from melt-spun ribbons. The microstructure of the as-quenched ribbons was microcrystalline and consisted of the Ag sub 3 Sn, Ag sub 4 Sn, Cu sub 3 Sn and Cu sub 3 Sn sub 8 phases. Mixing with mercury (amalgamation) led to formation of the Ag sub 2 Hg sub 3, Sn sub 7 Hg and Cu sub 6 Sn sub 5 phases. The amount of copper atoms in the alloys played an important role in phase formation in the amalgams

Amalgam stained dentin: a proper substrate for bonding resin composite?

NARCIS (Netherlands)

Scholtanus, J.D.

2016-01-01

Nowadays the use of dental amalgam is mostly abandoned and substituted by tooth colored resin composites that can be bonded to teeth tissues by adhesive techniques. The aim of this thesis was to find out whether dark stained dentin, as often observed after removal of amalgam restorations and

Genotoxic effects of silver amalgam and composite restorations: Micronuclei-Based cohort and case–control study in oral exfoliated cells

Directory of Open Access Journals (Sweden)

S Jeslin Mary

2018-01-01

Full Text Available Context: A huge number of people carry dental fillings which contain either mercury-based amalgam and/or the recently introduced methacrylate-based resins. It has been shown that both these materials are known to be leached into the oral cavity and induce genotoxic alterations in the buccal mucosal cells. Because of its low cost and ease of manipulation, dental amalgam is still widely used as a restorative material in developing countries. The health risks associated with the components of this restorative material has always been a matter of concern. The present study was designed to assess the frequency of micronuclei (MN in oral mucosal cells as it is a promising tool for studying the genotoxic effect of clastogenic agents on them. Aims: The aim of this study is to evaluate the genotoxic effects of silver amalgam and composite restorations by measuring the mean number of MN in oral exfoliated cells. Materials and Methods: The present study was a prospective cohort study which includes a study group consisting of 110 participants. The study sample was equally divided into 55 participants requiring only amalgam restoration and 55 participants requiring only composite restoration in any permanent molar teeth. The same participants before the restoration formed the control group. Smears were obtained from each patient before and 10 days after restoration and were stained with DNA-specific Feulgen stain. The number of cells containing MN out of 500 cells were counted and recorded. After the evaluation of the slides, the results were compiled and subjected to statistical analysis. Results: There was a statistically significant (P < 0.01 variation in the mean number of MN after the restoration in both amalgam (5.41 ± 1.25 and composite (2.83 ± 0.85 restorations when compared to before the restoration. However, the mean number of MN in composite restoration was significantly less when compared to amalgam restoration. There was also a statistically

Mercury exposure in children: a review

International Nuclear Information System (INIS)

Counter, S. Allen; Buchanan, Leo H.

2004-01-01

Exposure to toxic mercury (Hg) is a growing health hazard throughout the world today. Recent studies show that mercury exposure may occur in the environment, and increasingly in occupational and domestic settings. Children are particularly vulnerable to Hg intoxication, which may lead to impairment of the developing central nervous system, as well as pulmonary and nephrotic damage. Several sources of toxic Hg exposure in children have been reported in biomedical literature: (1) methylmercury, the most widespread source of Hg exposure, is most commonly the result of consumption of contaminated foods, primarily fish; (2) ethylmercury, which has been the subject of recent scientific inquiry in relation to the controversial pediatric vaccine preservative thimerosal; (3) elemental Hg vapor exposure through accidents and occupational and ritualistic practices; (4) inorganic Hg through the use of topical Hg-based skin creams and in infant teething powders; (5) metallic Hg in dental amalgams, which release Hg vapors, and Hg 2+ in tissues. This review examines recent epidemiological studies of methylmercury exposure in children. Reports of elemental Hg vapor exposure in children through accidents and occupational practices, and the more recent observations of the increasing use of elemental Hg for magico-religious purposes in urban communities are also discussed. Studies of inorganic Hg exposure from the widespread use of topical beauty creams and teething powders, and fetal/neonatal Hg exposure from maternal dental amalgam fillings are reviewed. Considerable attention was given in this review to pediatric methylmercury exposure and neurodevelopment because it is the most thoroughly investigated Hg species. Each source of Hg exposure is reviewed in relation to specific pediatric health effects, particularly subtle neurodevelopmental disorders

Significance of mercury in environmental health - an overview; Bedeutung von Quecksilber in der Umweltmedizin - eine Uebersicht

Energy Technology Data Exchange (ETDEWEB)

Schweinsberg, F. [Chemisches Labor, Institut fuer Allgemeine Hygiene und Umwelthygiene, Tuebingen (Germany)

2002-07-01

In addition to occupational exposure to mercury, dental amalgam fillings and fish consumption are the most important sources of mercury body burden in environmental medicine. The principle signs of chronic diseases of the nervous system caused by inorganic mercury are tremor, ataxia, impaired vision and emotional agitation. In the kidneys, tubular necrosis may develop. In patients with severe kidney dysfunction, no amalgam fillings should by inserted. In rare cases, amalgam fillings may cause allergic reactions of the delayed type IV sensitivity and oral lichenoid reactions. Subclinical effects caused by amalgam fillings and their impact on human health is still a topic of controversial discussion. In scientific terms it is not possible to demonstrate a correlation between unspecific symptoms and exposure of mercury released by amalgam fillings. Chronic toxicology of the nervous system caused by organic mercury is characterized by paresthesia, ataxia, dysarthria, constriction of the visual field and hearing impairment. Possible adverse effects on the fetus as a result of the uptake of organic mercury in fish consumption during pregnancy must be critically assessed. The evaluation of adverse health effects brought about by exposure to mercury is assessed in Germany by the definition of human biological monitoring (HBM) values. In long-term exposure to inorganic mercury above the HMB-II value of mercury in urine of 25 {mu}g/L, adverse health effects can arise. The corresponding HMB-II value in blood brought about by organic mercury is 15 {mu}g/L, which is approximately equal to a mercury content of 5 {mu}g/kg in hair. (orig.) [German] Neben dem Arbeitsplatz sind heute im Umweltbereich Amalgamfuellungen und Fischkonsum die wichtigsten Expositionsquellen mit Quecksilber. Leitsymptome einer chronischen Erkrankung des Nervensystems durch anorganisches Quecksilber sind Tremor, Koordinationsstoerungen von Bewegungsablaeufen, Sehstoerungen und Ueberregbarkeit. In den Nieren

Method of controlling the mercury vapor pressure in a photo-chemical lamp or vapor filter used for Hg196 enrichment

International Nuclear Information System (INIS)

Grossman, M.W.

1993-01-01

The present invention is directed to a method of eliminating the cold spot zones presently used on Hg 196 isotope separation lamps and filters by the use of a mercury amalgams, preferably mercury - indium amalgams. The use of an amalgam affords optimization of the mercury density in the lamp and filter of a mercury enrichment reactor, particularly multilamp enrichment reactors. Moreover, the use of an amalgam in such lamps and/or filters affords the ability to control the spectral line width of radiation emitted from lamps, a requirement for mercury enrichment

Biomarkers of mercury exposure at a mercury recycling facility in Ukraine

Science.gov (United States)

Gibb, H.J.; Kozlov, K.; Buckley, J.P.; Centeno, J.; Jurgenson, V.; Kolker, A.; Conko, K.; Landa, E.; Panov, B.; Panov, Y.; Xu, H.

2008-01-01

This study evaluates biomarkers of occupational mercury exposure among workers at a mercury recycling operation in Gorlovka, Ukraine. The 29 study participants were divided into three occupational categories for analysis: (1) those who worked in the mercury recycling operation (Group A, n = 8), (2) those who worked at the facility but not in the yard where the recycling was done (Group B, n = 14), and (3) those who did not work at the facility (Group C, n = 7). Urine, blood, hair, and nail samples were collected from the participants, and a questionnaire was administered to obtain data on age, gender, occupational history, smoking, alcohol consumption, fish consumption, tattoos, dental amalgams, home heating system, education, source of drinking water, and family employment in the former mercury mine/smelter located on the site of the recycling facility. Each factor was tested in a univariate regression with total mercury in urine, blood, hair, and nails. Median biomarker concentrations were 4.04 ??g/g-Cr (urine), 2.58 ??g/L (blood), 3.95 ??g/g (hair), and 1.16 ??g/g (nails). Occupational category was significantly correlated (p < 0.001) with both blood and urinary mercury concentrations but not with hair or nail mercury. Four individuals had urinary mercury concentrations in a range previously found to be associated with subtle neurological and subjective symptoms (e.g., fatigue, loss of appetite, irritability), and one worker had a urinary mercury concentration in a range associated with a high probability of neurological effects and proteinuria. Comparison of results by occupational category found that workers directly involved with the recycling operation had the highest blood and urinary mercury levels. Those who worked at the facility but were not directly involved with the recycling operation had higher levels than those who did not work at the facility. Copyright ?? 2008 JOEH, LLC.

Method of controlling the mercury vapor pressure in a photo-chemical lamp or vapor filter used for Hg.sup.196 enrichment

Science.gov (United States)

Grossman, Mark W.

1993-01-01

The present invention is directed to a method of eliminating the cold spot zones presently used on Hg.sup.196 isotope separation lamps and filters by the use of a mercury amalgams, preferably mercury - indium amalgams. The use of an amalgam affords optimization of the mercury density in the lamp and filter of a mercury enrichment reactor, particularly multilamp enrichment reactors. Moreover, the use of an amalgam in such lamps and/or filters affords the ability to control the spectral line width of radiation emitted from lamps, a requirement for mercury enrichment.

Method of controlling the mercury vapor pressure in a photo-chemical lamp or vapor filter used for Hg[sup 196] enrichment

Science.gov (United States)

Grossman, M.W.

1993-02-16

The present invention is directed to a method of eliminating the cold spot zones presently used on Hg[sup 196] isotope separation lamps and filters by the use of a mercury amalgams, preferably mercury - indium amalgams. The use of an amalgam affords optimization of the mercury density in the lamp and filter of a mercury enrichment reactor, particularly multilamp enrichment reactors. Moreover, the use of an amalgam in such lamps and/or filters affords the ability to control the spectral line width of radiation emitted from lamps, a requirement for mercury enrichment.

Application of thin film mercury electrodes and solid amalgam electrodes in electrochemical analysis of the nucleic acids components: detection of the two-dimensional phase transients of adenosine

Czech Academy of Sciences Publication Activity Database

Hasoň, Stanislav; Vetterl, Vladimír

2004-01-01

Roč. 63, 1-2 (2004), s. 37-41 ISSN 1567-5394 R&D Projects: GA AV ČR KJB4004305; GA AV ČR IBS5004107 Institutional research plan: CEZ:AV0Z5004920 Keywords : mercury film electrodes * solid amalgam electrodes * roughness Subject RIV: BO - Biophysics Impact factor: 2.261, year: 2004

Effect of Magnetic Resonance Imaging on Micro leakage of Amalgam Restorations

International Nuclear Information System (INIS)

Sayed, A.I.

2013-01-01

Objective: To authenticate whether exposure to magnetic resonance imaging (MRI) can cause micro leakage of amalgam restorations or not. Methods: This prospective in-vitro study study was conducted at Faculty of Oral and Dental Medicine, Cairo University. Thirty-six non-carious human teeth (18 premolars and 18 molars), (26 upper and 10 lower) were gathered from the Oral Surgery Department. Standard class V cavities with all margins in the enamel were made on the buccal and lingual aspects after surface debridement .Three groups of teeth were randomly assigned, each containing 12 teeth. Three types of amalgams were used, GS-80, Rupy Cap and Trend alloy. Each type of amalgams was randomly applied to one group. Each group was divided randomly into two equal categories, one was designed to be the control group and the other was scanned by a 1.5 Tesla MRI Scanner for approximately 5 minutes. Micro leakage was assessed in each group. Three amalgam specimens were scanned using 1.5 Tesla Optima MR360 Scanner .The three specimens were sticked to the superior aspect of the medium spine phantom (one specimen per scan) to induce magnetization transfer contrast to easily visualize these in vitro dental ware containing amalgam. The three specimens were scanned using the same Susceptibility Weighted Angiography (SWAN) technique in different orthogonal orientations (Axial, Coronal and Sagittal) to assess the amalgam induced artifacts during MRI scanning. The primary outcome measure was the micro leakage caused by different types of amalgams during MRI scanning; the second outcome measure was the artifacts that may be encountered by different types of amalgams during MRI scanning .

Making High-Tensile-Strength Amalgam Components

Science.gov (United States)

Grugel, Richard

2008-01-01

Structural components made of amalgams can be made to have tensile strengths much greater than previously known to be possible. Amalgams, perhaps best known for their use in dental fillings, have several useful attributes, including room-temperature fabrication, corrosion resistance, dimensional stability, and high compressive strength. However, the range of applications of amalgams has been limited by their very small tensile strengths. Now, it has been discovered that the tensile strength of an amalgam depends critically on the sizes and shapes of the particles from which it is made and, consequently, the tensile strength can be greatly increased through suitable choice of the particles. Heretofore, the powder particles used to make amalgams have been, variously, in the form of micron-sized spheroids or flakes. The tensile reinforcement contributed by the spheroids and flakes is minimal because fracture paths simply go around these particles. However, if spheroids or flakes are replaced by strands having greater lengths, then tensile reinforcement can be increased significantly. The feasibility of this concept was shown in an experiment in which electrical copper wires, serving as demonstration substitutes for copper powder particles, were triturated with gallium by use of a mortar and pestle and the resulting amalgam was compressed into a mold. The tensile strength of the amalgam specimen was then measured and found to be greater than 10(exp 4) psi (greater than about 69 MPa). Much remains to be done to optimize the properties of amalgams for various applications through suitable choice of starting constituents and modification of the trituration and molding processes. The choice of wire size and composition are expected to be especially important. Perusal of phase diagrams of metal mixtures could give insight that would enable choices of solid and liquid metal constituents. Finally, whereas heretofore, only binary alloys have been considered for amalgams

Optimization of procedures for mercury-203 instrumental neutron activation analysis in human urine

Energy Technology Data Exchange (ETDEWEB)

Blotcky, A J; Claassen, J P [Nebraska Univ., Omaha, NE (United States). Medical Center; Fung, Y K [Nebraska Univ., Lincoln, NE (United States). Dept. of Chemistry; Meade, A G; Rack, E P [Nebraska Univ., Lincoln, NE (United States)

1995-08-01

Mercury, a known neurotoxin, has been implicated in etiology and pathogenesis of such disease states as Alzheimer`s and Parkinson`s diseases. There is concern that the exposure to mercury vapor released from dental amalgam restorations is a potential health hazard. Measurement of mercury concentrations in blood or urine may be useful in diagnosis of mercury poisoning and in assessing the extent exposure. This study describes the optimization of pre-neutron activation analysis procedures such as sampling, selection of irradiation and counting vials and acid digestion in order to minimize mercury loss via volatilization and/or permeation through containers. Therefore, the determination of mercury can be complicated by these potential losses. In the optimized procedure 20mL of urine was spiked with three different concentrations of mercury, digested with concentrated nitric acid, and placed in polypropylene vials for irradiation and counting. Analysis was performed by subtracting the Se-75 photopeak contribution to the 279 keV Hg-203 photopeak and applying the method of standard additions. Urinary mercury concentrations in normal human subjects were determined to be of the order of 10ng/mL. (author). 22 refs., 1 fig., 5 tabs.

Optimization of procedures for mercury-203 instrumental neutron activation analysis in human urine

International Nuclear Information System (INIS)

Blotcky, A.J.; Claassen, J.P.

1995-01-01

Mercury, a known neurotoxin, has been implicated in etiology and pathogenesis of such disease states as Alzheimer's and Parkinson's diseases. There is concern that the exposure to mercury vapor released from dental amalgam restorations is a potential health hazard. Measurement of mercury concentrations in blood or urine may be useful in diagnosis of mercury poisoning and in assessing the extent exposure. This study describes the optimization of pre-neutron activation analysis procedures such as sampling, selection of irradiation and counting vials and acid digestion in order to minimize mercury loss via volatilization and/or permeation through containers. Therefore, the determination of mercury can be complicated by these potential losses. In the optimized procedure 20mL of urine was spiked with three different concentrations of mercury, digested with concentrated nitric acid, and placed in polypropylene vials for irradiation and counting. Analysis was performed by subtracting the Se-75 photopeak contribution to the 279 keV Hg-203 photopeak and applying the method of standard additions. Urinary mercury concentrations in normal human subjects were determined to be of the order of 10ng/mL. (author). 22 refs., 1 fig., 5 tabs

Inaccurate Dental Charting in an Audit of 1128 General Dental Practice Records.

Science.gov (United States)

Brown, Nathan L; Jephcote, Victoria E L

2017-03-01

Fourteen dentists at different practices in the UK assessed the dental charts of 1128 patients who were new to the dentist but not new to the practice; 44% of the dental charts were found to be inaccurate. Inaccuracy of the individual practice-based charts ranged between 16% for the best performing practices to 83% for the worst: 5% of dental charts had too many teeth charted and 5% had too few teeth charted; 13% of charts had missed amalgam restorations and 18% had missed tooth-coloured restorations; 5% of charts had amalgam restorations recorded but with the surfaces incorrect (eg an MO restoration charted but a DO restoration actually present); 9% of charts had tooth-coloured restoration surfaces incorrectly recorded. For 7.5% of charts, amalgams were charted but not actually present. Other inaccuracies were also noted. The authors reinforce the requirements of the GDC, the advice of defence organizations, and the forensic importance of accurate dental charts. Clinical relevance: Dental charting forms part of the patient’s dental records, and the GDC requires dentists to maintain complete and accurate dental records.

Determination of 5-nitroindazole using silver solid amalgam electrode

Czech Academy of Sciences Publication Activity Database

Nováková, Kateřina; Hrdlička, V.; Navrátil, Tomáš; Vyskočil, V.; Barek, J.

2015-01-01

Roč. 146, č. 5 (2015), s. 761-769 ISSN 0026-9247 R&D Projects: GA ČR(CZ) GAP208/12/1645 Institutional support: RVO:61388955 Keywords : 5-nitroindazole * hanging mercury drop electrode * silver sold amalgam electrode Subject RIV: CG - Electrochemistry Impact factor: 1.131, year: 2015

Cadmium, mercury, and lead in kidney cortex of living kidney donors: Impact of different exposure sources,

Energy Technology Data Exchange (ETDEWEB)

Barregard, Lars, E-mail: lars.barregard@amm.gu.se [Department of Occupational and Environmental Medicine, Sahlgrenska University Hospital and University of Gothenburg, P.O. Box 414, SE 405 30 Gothenburg (Sweden); Fabricius-Lagging, Elisabeth [Department of Nephrology, Sahlgrenska University Hospital and Boras Hospital (Sweden); Lundh, Thomas [Department of Occupational and Environmental Medicine, Lund University Hospital and Lund University (Sweden); Moelne, Johan [Department of Clinical Pathology, Sahlgrenska University Hospital and University of Gothenburg (Sweden); Wallin, Maria [Department of Occupational and Environmental Medicine, Sahlgrenska University Hospital and University of Gothenburg, P.O. Box 414, SE 405 30 Gothenburg (Sweden); Olausson, Michael [Department of Transplantation and Liver Surgery, Sahlgrenska University Hospital and University of Gothenburg (Sweden); Modigh, Cecilia; Sallsten, Gerd [Department of Occupational and Environmental Medicine, Sahlgrenska University Hospital and University of Gothenburg, P.O. Box 414, SE 405 30 Gothenburg (Sweden)

2010-01-15

Background: Most current knowledge on kidney concentrations of nephrotoxic metals like cadmium (Cd), mercury (Hg), or lead (Pb) comes from autopsy studies. Assessment of metal concentrations in kidney biopsies from living subjects can be combined with information about exposure sources like smoking, diet, and occupation supplied by the biopsied subjects themselves. Objectives: To determine kidney concentrations of Cd, Hg, and Pb in living kidney donors, and assess associations with common exposure sources and background factors. Methods: Metal concentrations were determined in 109 living kidney donors aged 24-70 years (median 51), using inductively coupled plasma-mass spectrometry (Cd and Pb) and cold vapor atomic fluorescence spectrometry (Hg). Smoking habits, occupation, dental amalgam, fish consumption, and iron stores were evaluated. Results: The median kidney concentrations were 12.9 {mu}g/g (wet weight) for cadmium, 0.21 {mu}g/g for mercury, and 0.08 {mu}g/g for lead. Kidney Cd increased by 3.9 {mu}g/g for a 10 year increase in age, and by 3.7 {mu}g/g for an extra 10 pack-years of smoking. Levels in non-smokers were similar to those found in the 1970s. Low iron stores (low serum ferritin) in women increased kidney Cd by 4.5 {mu}g/g. Kidney Hg increased by 6% for every additional amalgam surface, but was not associated with fish consumption. Lead was unaffected by the background factors surveyed. Conclusions: In Sweden, kidney Cd levels have decreased due to less smoking, while the impact of diet seems unchanged. Dental amalgam is the main determinant of kidney Hg. Kidney Pb levels are very low due to decreased exposure.

Cadmium, mercury, and lead in kidney cortex of living kidney donors: Impact of different exposure sources,

International Nuclear Information System (INIS)

Barregard, Lars; Fabricius-Lagging, Elisabeth; Lundh, Thomas; Moelne, Johan; Wallin, Maria; Olausson, Michael; Modigh, Cecilia; Sallsten, Gerd

2010-01-01

Background: Most current knowledge on kidney concentrations of nephrotoxic metals like cadmium (Cd), mercury (Hg), or lead (Pb) comes from autopsy studies. Assessment of metal concentrations in kidney biopsies from living subjects can be combined with information about exposure sources like smoking, diet, and occupation supplied by the biopsied subjects themselves. Objectives: To determine kidney concentrations of Cd, Hg, and Pb in living kidney donors, and assess associations with common exposure sources and background factors. Methods: Metal concentrations were determined in 109 living kidney donors aged 24-70 years (median 51), using inductively coupled plasma-mass spectrometry (Cd and Pb) and cold vapor atomic fluorescence spectrometry (Hg). Smoking habits, occupation, dental amalgam, fish consumption, and iron stores were evaluated. Results: The median kidney concentrations were 12.9 μg/g (wet weight) for cadmium, 0.21 μg/g for mercury, and 0.08 μg/g for lead. Kidney Cd increased by 3.9 μg/g for a 10 year increase in age, and by 3.7 μg/g for an extra 10 pack-years of smoking. Levels in non-smokers were similar to those found in the 1970s. Low iron stores (low serum ferritin) in women increased kidney Cd by 4.5 μg/g. Kidney Hg increased by 6% for every additional amalgam surface, but was not associated with fish consumption. Lead was unaffected by the background factors surveyed. Conclusions: In Sweden, kidney Cd levels have decreased due to less smoking, while the impact of diet seems unchanged. Dental amalgam is the main determinant of kidney Hg. Kidney Pb levels are very low due to decreased exposure.

Product-related emissions of Mercury to Air in the European Union

Energy Technology Data Exchange (ETDEWEB)

Kindbom, Karin; Munthe, John

2007-06-15

Mercury emissions to air from the use of mercury in products have been estimated for the EU for the year 2005. The consumption of mercury in the EU in 2005 was amounted to 125 tonnes in technical products. Estimates of emissions of mercury from dental amalgam were derived from information on cremations in European countries and average contents of amalgam fillings. Annual emissions of mercury to air from product use in EU27 have been estimated to be in the range 10-18 tonnes (best estimate 14 tonnes) from technical products and to 2-5 tonnes from cremation, in total 12-23 tonnes. Of the mercury consumed in technical products, 11% was calculated to be emitted to air, 31% to end up in safe storage while 58% would still be accumulated in society or disposed of in landfills. From the share still accumulated in society, as well as from the already land filled amounts, further emissions of mercury to air may occur in the longer term. Emissions from technical products are calculated based on the consumption of mercury in 2005. Emissions occurring in the same year but caused by consumption in the previous 10 years were derived using the consumption in 2005 and assuming the same patterns of distribution and emissions. The latest available estimates of total anthropogenic emissions of mercury in EU27 refer to the year 2000 and are in the order of 140-190 tonnes, probably to have declined to 2005. Based on these figures the contribution to anthropogenic mercury emissions to air in EU from product use and cremation in 2005 is at least 6-16%. In a previous report product related air emissions of 72 tonnes were estimated for Europe in the mid 1990s, corresponding to 18% of the total air emissions. A significant decrease of emissions has thus occurred which is in line with a decreasing use of mercury in technical products, more efficient collection of remaining products and better emission control. However, the calculations show that the use of mercury in products still

Mercury emissions control technologies for mixed waste thermal treatment

International Nuclear Information System (INIS)

Chambers, A.; Knecht, M.; Soelberg, N.; Eaton, D.

1997-01-01

EPA has identified wet scrubbing at low mercury feedrates, as well as carbon adsorption via carbon injection into the offgas or via flow through fixed carbon beds, as control technologies that can be used to meet the proposed Maximum Achievable Control Technology (MACT) rule limit for mercury emissions from hazardous waste incinerators. DOE is currently funding demonstrations of gold amalgamation that may also control mercury to the desired levels. Performance data from a variety of sources was reviewed to determine ranges of achievable mercury control. Preliminary costs were estimated for using these technologies to control mercury emissions from mixed waste incineration. Mercury emissions control for mixed waste incineration may need to be more efficient than for incineration of other hazardous wastes because of higher mercury concentrations in some mixed waste streams. However, mercury control performance data for wet scrubbing and carbon adsorption is highly variable. More information is needed to demonstrate control efficiencies that are achievable under various design and operating conditions for wet scrubbing, carbon adsorption, and gold amalgamation technologies. Given certain assumptions made in this study, capital costs, operating costs, and lifecycle costs for carbon injection, carbon beds, and gold amalgamation generally vary for different assumed mercury feedrates and for different offgas flowrates. Assuming that these technologies can in fact provide the necessary mercury control performance, each of these technologies may be less costly than the others for certain mercury feedrates and the offgas flowrates

Pengaruh Penambahan Paladium Terhadap Perilaku Thermal Amalgam Tembaga Tinggi Tipe Lathe Cut

Directory of Open Access Journals (Sweden)

Ellyza Herda

2015-09-01

Full Text Available Effects of additing 1 percent (w/o palladium (Pd on the thermal behavior of a lathe cut type high copper amalgam (13 w/o copper were studied. The identical alloys, with and without 1% Pd were fabricated. X-ray diffraction studies of the amalgams revealed the elimination of the γ2-phase by Pd addition DSC thermogram of non-Pd containing amalgam indicated the existence of two γ1-phaseone with the transition temperature (endothermic peak at 88◦C and the other at 109◦C. The thermogram data of the Pd containing amalgam showed an endothermic peak at 110.7◦C. The transition temperature of the n phase of the palladium containing amalgam is 4.9◦C lower than the transition temperature of the n phase of the non Pd containing amalgam. This result indicates that the n phase of the Pd containing amalgam includes more of Tin (Sn than the non-Pd containing amalgam. The thermogravimetri diagram showed that the phase decomposition occurred at about 390◦C for the non-Pd containing amalgam and at about 410◦C for the Pd containing amalgam. It is concluded that the addition of 1% Pd into a lathe cut type of high copper amalgam (13% could eliminate the formation of γ2 phase as well as an unstable γ1 phase, promoting strong mercury bonding to Silver.

Human Exposure and Health Effects of Inorganic and Elemental Mercury

Science.gov (United States)

Zheng, Wei

2012-01-01

Mercury is a toxic and non-essential metal in the human body. Mercury is ubiquitously distributed in the environment, present in natural products, and exists extensively in items encountered in daily life. There are three forms of mercury, i.e., elemental (or metallic) mercury, inorganic mercury compounds, and organic mercury compounds. This review examines the toxicity of elemental mercury and inorganic mercury compounds. Inorganic mercury compounds are water soluble with a bioavailability of 7% to 15% after ingestion; they are also irritants and cause gastrointestinal symptoms. Upon entering the body, inorganic mercury compounds are accumulated mainly in the kidneys and produce kidney damage. In contrast, human exposure to elemental mercury is mainly by inhalation, followed by rapid absorption and distribution in all major organs. Elemental mercury from ingestion is poorly absorbed with a bioavailability of less than 0.01%. The primary target organs of elemental mercury are the brain and kidney. Elemental mercury is lipid soluble and can cross the blood-brain barrier, while inorganic mercury compounds are not lipid soluble, rendering them unable to cross the blood-brain barrier. Elemental mercury may also enter the brain from the nasal cavity through the olfactory pathway. The blood mercury is a useful biomarker after short-term and high-level exposure, whereas the urine mercury is the ideal biomarker for long-term exposure to both elemental and inorganic mercury, and also as a good indicator of body burden. This review discusses the common sources of mercury exposure, skin lightening products containing mercury and mercury release from dental amalgam filling, two issues that happen in daily life, bear significant public health importance, and yet undergo extensive debate on their safety. PMID:23230464

Ultrasensitive determination of mercury in human saliva by atomic fluorescence spectrometry based on solidified floating organic drop microextraction

International Nuclear Information System (INIS)

Yuan, C.-G.; Wang, J.; Jin, Y.

2012-01-01

We report on a new, rapid and simple method for the determination of ultra-trace quantities of mercury ion in human saliva. It is based on solidified floating organic drop microextraction and detection by cold vapor atomic fluorescence spectrometry (CV-AFS). Mercury ion was complexed with diethyldithiocarbamate, and the hydrophobic complex was then extracted into fine droplets of 1-undecanol. By cooling in an ice bath after extraction, the droplets in solution solidify to form a single ball floating on the surface of solution. The solidified micro drop containing the mercury complex was then transferred for determination by CV-AFS. The effects of pH value, concentration of chelating reagent, quantity of 1-undecanol, sample volume, equilibration temperature and time were investigated. Under the optimum conditions, the preconcentration of a 25-mL sample is accomplished with an enrichment factor of 182. The limit of detection is 2.5 ng L -1 . The relative standard deviation for seven replicate determinations at 0.1 ng mL -1 level is 4.1%. The method was applied to the determination of mercury in saliva samples collected from four volunteers. Two volunteers having dental amalgam fillings had 0.4 ng mL -1 mercury in their saliva, whereas mercury was not detectable in the saliva of two volunteers who had no dental fillings. (author)

Sensitive voltammetric method for determination of herbicide triasulfuron using silver solid amalgam electrode

Czech Academy of Sciences Publication Activity Database

Bandžuchová, L.; Šelešovská, R.; Navrátil, Tomáš; Chýlková, J.

2013-01-01

Roč. 113, DEC 2013 (2013), s. 1-8 ISSN 0013-4686 R&D Projects: GA ČR(CZ) GAP208/12/1645 Grant - others:GA MŠk(CZ) CZ.1.07/2.3.00/30.0021 Institutional support: RVO:61388955 Keywords : Triasulfuron * Hanging mercury drop electrode * Mercury meniscus modified silver solid amalgam electrode Subject RIV: CG - Electrochemistry Impact factor: 4.086, year: 2013

Dental hygiene work in a clinical trial.

Science.gov (United States)

Luís, H S; Morgado, I; Assunção, V; Bernardo, M F; Leroux, B; Martin, M D; DeRouen, T A; Leitão, J

2008-08-01

Dental hygiene activities were developed as part of a randomized clinical trial designed to assess the safety of low-level mercury exposure from dental amalgam restorations. Along with dental-hygiene clinical work, a community programme was implemented after investigators noticed the poor oral hygiene habits of participants, and the need for urgent action to minimize oral health problems in the study population. Clinical and community activity goal was to promote oral health and prevent new disease. Community activities involved participants and their fellow students and were aimed at providing education on oral health in a school environment. Dental hygienists developed clinical work with prophylaxis, sealants application and topical fluoride and implemented the community programme with in-class sessions on oral health themes. Twice a month fluoride mouthrinses and bi-annual tooth brushing instructional activity took place. Participation at dental-hygiene activities, sealed teeth with no need of restoration and dental-plaque-index were measures used to evaluate success of the programme for the participants. Improvement in dental hygiene is shown by the decrease in dental plaque index scores (P dental hygiene activities. Teachers became aware of the problem and included oral-health in school curricula. Dental hygiene activities have shown to be helpful to promote dental hygiene, promote oral health and to provide school-age children with education on habits that will be important for their future good health.

Determination of mercury and its fractionation products in samples from legacy use of mercury amalgam in gold processing in Randfontein, South Africa

Directory of Open Access Journals (Sweden)

Tshia Malehase

2016-09-01

Full Text Available This study aimed at determining the levels of total mercury (THg in tailings dams, soil, sediments and water samples collected in the vicinity of legacy mercury amalgam gold mines. Acid digestion was employed in sample digestion followed by analysis using CVAAS. Tailings dams, community and garden soil, and stream sediments were further investigated for mercury fractions using a five step sequential extraction procedure. The concentrations of THg in tailings dams, community and gardens soil were 0.890–6.755 μg/g, 0.431–0.968 μg/g and 0.471–1.019 μg/g, respectively and the concentrations of THg in the sediments obtained from tailings dams, streams and wetlands were 0.649–1.998 μg/g, 0.604–1.356 μg/g and 0.681–1.356 μg/g, respectively. The concentrations of THg, in aqueous samples obtained from tailings, streams and wetlands were 0.032–0.070 μg/l, 0.004–0.068 μg/l and 0.007–0.012 μg/l, respectively. The sequential extraction procedure showed that most Hg in the tailings dams was largely elemental Hg and Hg bound to sulphur. Soil and sediments were largely dominated by organic bound Hg. Moderate seasonal correlation was observed in tailings dams soil, but weak seasonal correlation in soils collected in the vicinity of tailings. However, a strong seasonal correlation was observed in sediments and water samples. The concentrations of Hg obtained largely existed in organic and sulphate bound Hg and there is elevated potential to methylate Hg.

A novel method for the preparation of uranium metal, oxide and carbide via electrolytic amalgamation

International Nuclear Information System (INIS)

Wang, L.C.; Lee, H.C.; Lee, T.S.; Lai, W.C.; Chang, C.T.

1978-01-01

A solid uranium amalgam was prepared electrolytically using a two-compartment cell separated with an ion exchange membrane for the purpose of regulating pH value within a narrowly restricted region of 2 to 3. The mercury cathode was kept at -1.8V vs SCE during electrolysis. The thereby obtained amalgam containing as high as 1.9gm U/ml Hg is easily converted into uranium metal by heating in vacuo above 1300 0 C. Uranium dioxide and uranium monocarbide could be easily obtained at relatively low temperature by reacting the amalgam with water vapor and methane. (author)

Mixed Waste Focus Area Mercury Working Group: An integrated approach to mercury waste treatment and disposal

International Nuclear Information System (INIS)

Conley, T.B.; Morris, M.I.; Osborne-Lee, I.W.

1998-03-01

In May 1996, the US Department of Energy (DOE) Mixed Waste Focus Area (MWFA) initiated the Mercury Working Group (HgWG). The HgWG was established to address and resolve the issues associated with mercury contaminated mixed wastes. During the MWFA's initial technical baseline development process, three of the top four technology deficiencies identified were related to the need for amalgamation, stabilization, and separation removal technologies for the treatment of mercury and mercury contaminated mixed waste. The HgWG is assisting the MWFA in soliciting, identifying, initiating, and managing efforts to address these areas. The focus of the HgWG is to better establish the mercury related treatment technologies at the DOE sites, refine the MWFA technical baseline as it relates to mercury treatment, and make recommendations to the MWFA on how to most effectively address these needs. Based on the scope and magnitude of the mercury mixed waste problem, as defined by HgWG, solicitations and contract awards have been made to the private sector to demonstrate both the amalgamation and stabilization processes using actual mixed wastes. Development efforts are currently being funded that will address DOE's needs for separation removal processes. This paper discusses the technology selection process, development activities, and the accomplishments of the HgWG to date through these various activities

Mercury contamination from artisanal gold mining in Antioquia, Colombia: The world's highest per capita mercury pollution.

Science.gov (United States)

Cordy, Paul; Veiga, Marcello M; Salih, Ibrahim; Al-Saadi, Sari; Console, Stephanie; Garcia, Oseas; Mesa, Luis Alberto; Velásquez-López, Patricio C; Roeser, Monika

2011-12-01

The artisanal gold mining sector in Colombia has 200,000 miners officially producing 30tonnes Au/a. In the Northeast of the Department of Antioquia, there are 17 mining towns and between 15,000 and 30,000 artisanal gold miners. Guerrillas and paramilitary activities in the rural areas of Antioquia pushed miners to bring their gold ores to the towns to be processed in Processing Centers or entables. These Centers operate in the urban areas amalgamating the whole ore, i.e. without previous concentration, and later burn gold amalgam without any filtering/condensing system. Based on mercury mass balance in 15 entables, 50% of the mercury added to small ball mills (cocos) is lost: 46% with tailings and 4% when amalgam is burned. In just 5 cities of Antioquia, with a total of 150,000 inhabitants: Segovia, Remedios, Zaragoza, El Bagre, and Nechí, there are 323 entables producing 10-20tonnes Au/a. Considering the average levels of mercury consumption estimated by mass balance and interviews of entables owners, the mercury consumed (and lost) in these 5 municipalities must be around 93tonnes/a. Urban air mercury levels range from 300ng Hg/m(3) (background) to 1million ng Hg/m(3) (inside gold shops) with 10,000ng Hg/m(3) being common in residential areas. The WHO limit for public exposure is 1000ng/m(3). The total mercury release/emissions to the Colombian environment can be as high as 150tonnes/a giving this country the shameful first position as the world's largest mercury polluter per capita from artisanal gold mining. One necessary government intervention is to cut the supply of mercury to the entables. In 2009, eleven companies in Colombia legally imported 130tonnes of metallic mercury, much of it flowing to artisanal gold mines. Entables must be removed from urban centers and technical assistance is badly needed to improve their technology and reduce emissions. Copyright © 2011 Elsevier B.V. All rights reserved.

Electrolytic method for the production of lithium using a lithium-amalgam electrode

Science.gov (United States)

Cooper, John F.; Krikorian, Oscar H.; Homsy, Robert V.

1979-01-01

A method for recovering lithium from its molten amalgam by electrolysis of the amalgam in an electrolytic cell containing as a molten electrolyte a fused-salt consisting essentially of a mixture of two or more alkali metal halides, preferably alkali metal halides selected from lithium iodide, lithium chloride, potassium iodide and potassium chloride. A particularly suitable molten electrolyte is a fused-salt consisting essentially of a mixture of at least three components obtained by modifying an eutectic mixture of LiI-KI by the addition of a minor amount of one or more alkali metal halides. The lithium-amalgam fused-salt cell may be used in an electrolytic system for recovering lithium from an aqueous solution of a lithium compound, wherein electrolysis of the aqueous solution in an aqueous cell in the presence of a mercury cathode produces a lithium amalgam. The present method is particularly useful for the regeneration of lithium from the aqueous reaction products of a lithium-water-air battery.

Mercury accumulation in placenta and foetal membranes. A study of dental workers and their babies

Energy Technology Data Exchange (ETDEWEB)

Wannag, A; Skjaerasen, J

1975-01-01

To investigate the hazards of exposure to levels of elementary mercury lower than the present TLV value (0.05 mg/m/sup 3/) a group of dental workers and a nonexposed group were studied. The amount of mercury in blood from mothers and babies at the time of delivery was similar. The exposed group had increased mercury content in placenta and fetal membranes. Mercury accumulation in these organs might serve as a protection for the fetus against mercury exposure. Since exposure to sub-TLV concentrations of elemental mercury during pregnancy will not be reflected in blood mercury content at the time of delivery, the amount of mercury in placenta and fetal membranes might serve as a biological indicator of such exposure.

Validation of an analytical method for the determination of total mercury in urine samples using cold vapor atomic absorption spectrometry (CV-AAS)

International Nuclear Information System (INIS)

Guilhen, Sabine Neusatz

2009-01-01

Mercury (Hg) is a toxic metal applied to a variety of products and processes, representing a risk to the health of occupationally or accidentally exposed subjects. Dental amalgam is a restorative material composed of metallic mercury, which use has been widely debated in the last decades. Due to the dubiety of the studies concerning dental amalgam, many efforts concerning this issue have been conducted. The Tropical Medicine Foundation (Tocantins, Brazil) has recently initiated a study to evaluate the environmental and occupational levels of exposure to mercury in dentistry attendants at public consulting rooms in the city of Araguaina (TO). In collaboration with this study, the laboratory of analysis at IPEN's Chemistry and Environment Center is undertaking the analysis of mercury levels in exposed subjects' urine samples using cold vapor atomic absorption spectrometry. This analysis requires the definition of a methodology capable of generating reliable results. Such methodology can only be implemented after a rigorous validation procedure. As part of this work, a series of tests were conducted in order to confirm the suitability of the selected methodology and to assert that the laboratory addresses all requirements needed for a successful implementation of the methodology. The following parameters were considered in order to test the method's performance: detection and quantitation limits, selectivity, sensitivity, linearity, accuracy and precision. The assays were carried out with certified reference material, which assures the traceability of the results. Taking into account the estimated parameters, the method can be considered suitable for the afore mentioned purpose. The mercury concentration found for the reference material was of (95,12 +- 11,70)mug.L -1 with a recovery rate of 97%. The method was also applied to 39 urine samples, six of which (15%) showing urinary mercury levels above the normal limit of 10μg.L -1 . The obtained results fall into a

Role of dental restoration materials in oral mucosal lichenoid lesions

Directory of Open Access Journals (Sweden)

Rajneesh Sharma

2015-01-01

Full Text Available Background: Dental restorative materials containing silver-mercury compounds have been known to induce oral lichenoid lesions. Objectives: To determine the frequency of contact allergy to dental restoration materials in patients with oral lichenoid lesions and to study the effect of removal of the materials on the lesions. Results: Forty-five patients were recruited in three groups of 15 each: Group A (lesions in close contact with dental materials, Group B (lesions extending 1 cm beyond the area of contact and Group C (no topographic relationship. Thirty controls were recruited in two groups of 15 individuals each: Group D (oral lichenoid lesions but no dental material and Group E (dental material but no oral lichenoid lesions. Patch tests were positive in 20 (44.5% patients. Mercury was the most common allergen to elicit a positive reaction in eight patients, followed by nickel (7, palladium (5, potassium dichromate (3, balsam of Peru, gold sodium thiosulphate 2 and tinuvin (2 and eugenol (1, cobalt chloride (1 and carvone (1. Seven patients elicited positive response to more than one allergen. In 13 of 20 patients who consented to removal of the dental material, complete healing was observed in 6 (30%, marked improvement in 7 (35% and no improvement in 7 (35% patients. Relief of symptoms was usually observed 3 months after removal. Limitations: Limited number of study subjects and short follow up after removal/replacement of dental restoration materials are the main limitations of this study. Conclusion: Contact allergy to amalgam is an important etiologic factor in oral lichenoid lesions and removal of restorative material should be offered to patients who have lesions in close proximity to the dental material.

Voltammetric Determination of 4-Nitrophenol and 5-Nitrobenzimidazole Using Different Types of Silver Solid Amalgam Electrodes - A Comparative Study

Czech Academy of Sciences Publication Activity Database

Deýlová, D.; Josypčuk, Bohdan; Vyskočil, V.; Barek, J.

2011-01-01

Roč. 23, č. 7 (2011), s. 1548-1555 ISSN 1040-0397 R&D Projects: GA MŠk(CZ) LC06063; GA AV ČR IAA400400806 Institutional research plan: CEZ:AV0Z40400503 Keywords : voltammetry * polished silver solid amalgam electrode * Mercury meniscus modified silver solid amalgam electrode Subject RIV: CG - Electrochemistry Impact factor: 2.872, year: 2011

Mixed Waste Focus Area mercury contamination product line: An integrated approach to mercury waste treatment and disposal

International Nuclear Information System (INIS)

Hulet, G.A.; Conley, T.B.; Morris, M.I.

1998-01-01

The US Department of Energy (DOE) Mixed Waste Focus Area (MWFA) is tasked with ensuring that solutions are available for the mixed waste treatment problems of the DOE complex. During the MWFA's initial technical baseline development process, three of the top four technology deficiencies identified were related to the need for amalgamation, stabilization, and separation/removal technologies for the treatment of mercury and mercury-contaminated mixed waste. The focus area grouped mercury-waste-treatment activities into the mercury contamination product line under which development, demonstration, and deployment efforts are coordinated to provide tested technologies to meet the site needs. The Mercury Working Group (HgWG), a selected group of representatives from DOE sites with significant mercury waste inventories, is assisting the MWFA in soliciting, identifying, initiating, and managing efforts to address these areas. Based on the scope and magnitude of the mercury mixed waste problem, as defined by HgWG, solicitations and contract awards have been made to the private sector to demonstrate amalgamation and stabilization processes using actual mixed wastes. Development efforts are currently being funded under the product line that will address DOE's needs for separation/removal processes. This paper discusses the technology selection process, development activities, and the accomplishments of the MWFA to date through these various activities

Assessment of occupational exposure of dental professionals to mercury in dental offices of a public primary health care in Maringá, Paraná State, Brazil - 10.4025/actascihealthsci.v34ispec.13428

Directory of Open Access Journals (Sweden)

André Gasparetto

2012-12-01

Full Text Available In order to evaluate the occupational exposure of dental professionals to metallic mercury in dental offices of a public primary health care in the city of Maringá, Brazil, samples of blood and urine were collected from 149 dental professionals (group exposed, and 51 healthy adults similar for age and gender of the exposed group (control group in September and October, 2008. Urinary mercury was determined using atomic absorption spectrophotometry, urea and creatinine in blood and urine by UV/VIS spectrophotometry and analysis of physical, chemical and microbiological characteristics of the urine by reactive bands. The program ‘Statistic’ version 7.1 and the software R version 2.6.2 were used for the statistical calculations. Urinary mercury was 2.08 ± 2.11 µg g-1 creatinine in workers exposed to mercury and 0.36 ± 0.62 µg g-1 creatinine in the control group (p -1 creatinine; 11% of these professionals (n = 16 had mercury levels above the reference value (5.0 µg g-1 creatinine, whereas the maximum value found was 13 µg g-1 creatinine. The dental professionals of public primary health care in the city of Maringa was exposed to metallic mercury at levels 5.8 times higher than the non-exposed subjects.  

Analysis of mercury and selenium in biological samples by neutron activation analysis; Analise de mercurio e selenio em materiais biologicos pelo metodo de analise por ativacao com neutrons

Energy Technology Data Exchange (ETDEWEB)

Catharino, Marilia Gabriela Miranda

2002-07-01

In the present work, hair samples from populations suspected of contamination by mercury, in the localities of Serra do Navio, Vila Nova and Tartarugalzinho, in the State of Amapa, were analyzed. Hair samples of children under odontopediatric treatment were also analyzed for mercury, in order to study the possibility of transfer of mercury from the dental amalgam and also to obtain data of hair mercury in a control population of children. Another step of the work was the development of a method for the determination of selenium, by using the short-lived radioisotope {sup 77}mSe. After the certification of the method it was applied to the analysis of hair, nails and a vitamin supplement. A comparison was made with the results obtain ed by using the long-lived radioisotope of selenium, {sup 75}Se. The results obtained for mercury in the hair samples of populations living in the State of Amapa have shown that the mercury concentrations in these populations are much higher than in the controls. As for the hair samples of children under treatment with mercury amalgam, no significant differences were found in the concentrations of mercury after the treatment. On the other hand, these data were important to obtain data for a control population of children. The results obtained by using the radioisotope {sup 77}mSe showed that the method developed was suitable for the analyzed matrixes and the results were similar to the ones obtained by employing the usual AANI method, with the radioisotope {sup 75}Se. (author)

Target-induced formation of gold amalgamation on DNA-based sensing platform for electrochemical monitoring of mercury ion coupling with cycling signal amplification strategy.

Science.gov (United States)

Chen, Jinfeng; Tang, Juan; Zhou, Jun; Zhang, Lan; Chen, Guonan; Tang, Dianping

2014-01-31

Heavy metal ion pollution poses severe risks in human health and environmental pollutant, because of the likelihood of bioaccumulation and toxicity. Driven by the requirement to monitor trace-level mercury ion (Hg(2+)), herein we construct a new DNA-based sensor for sensitive electrochemical monitoring of Hg(2+) by coupling target-induced formation of gold amalgamation on DNA-based sensing platform with gold amalgamation-catalyzed cycling signal amplification strategy. The sensor was simply prepared by covalent conjugation of aminated poly-T(25) oligonucleotide onto the glassy carbon electrode by typical carbodiimide coupling. Upon introduction of target analyte, Hg(2+) ion was intercalated into the DNA polyion complex membrane based on T-Hg(2+)-T coordination chemistry. The chelated Hg(2+) ion could induce the formation of gold amalgamation, which could catalyze the p-nitrophenol with the aid of NaBH4 and Ru(NH3)6(3+) for cycling signal amplification. Experimental results indicated that the electronic signal of our system increased with the increasing Hg(2+) level in the sample, and has a detection limit of 0.02nM with a dynamic range of up to 1000nM Hg(2+). The strategy afforded exquisite selectivity for Hg(2+) against other environmentally related metal ions. In addition, the methodology was evaluated for the analysis of Hg(2+) in spiked tap-water samples, and the recovery was 87.9-113.8%. Copyright © 2013 Elsevier B.V. All rights reserved.

One-pot Sonochemical Synthesis of Hg-Ag Alloy Microspheres from Liquid Mercury.

Science.gov (United States)

Harika, Villa Krishna; Kumar, Vijay Bhooshan; Gedanken, Aharon

2018-01-01

Metallic mercury has always attracted much attention in various fields because of its unique characteristic of forming amalgams. Here, different phases of pure crystalline Hg-Ag amalgam microspheres are synthesized by ultrasonically reacting liquid mercury with an aqueous solution of silver nitrate. Sonicating different molar ratios of liquid metallic Hg with AgNO 3 results in the formation of pure crystalline phases of solid silver amalgams with uniform morphology. The resulting Hg-Ag amalgams from various compositions after sonication are physically characterized by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS) and Differential Scanning Calorimetry (DSC). The XRD of the amalgams obtained from the molar ratios of Hg:Ag (1:1.5) and Hg:Ag (1.5:1 and 2:1) match the Schachnerite and Moschellandbergite phases, respectively, whereas the Hg-Ag amalgam prepared from a 1:1Hg:Ag molar ratio results in a mixture of the Schachnerite and Moschellandbergite phases. The obtained amalgam microspheres are between 6 and 10µm in size. The detailed thermal and chemical behaviour of the Ag-Hg systems is also investigated. Copyright © 2017 Elsevier B.V. All rights reserved.

Biomarkers of mercury exposure in two eastern Ukraine cities

Science.gov (United States)

Gibb, H.; Haver, C.; Kozlov, K.; Centeno, J.A.; Jurgenson, V.; Kolker, A.; Conko, K.M.; Landa, E.R.; Xu, H.

2011-01-01

This study evaluates biomarkers of mercury exposure among residents of Horlivka, a city in eastern Ukraine located in an area with geologic and industrial sources of environmental mercury, and residents of Artemivsk, a nearby comparison city outside the mercury-enriched area. Samples of urine, blood, hair, and nails were collected from study participants, and a questionnaire was administered to obtain data on age, gender, occupational history, smoking, alcohol consumption, fish consumption, tattoos, dental amalgams, home heating system, education, source of drinking water, and family employment in mines. Median biomarker mercury concentrations in Artemivsk were 0.26 ??g/g-Cr (urine), 0.92 ??g/L (blood), 0.42 ??g/g (hair), 0.11 ??g/g (toenails), and 0.09 ??g/g (fingernails); median concentrations in Horlivka were 0.15 ??g/g-Cr (urine), 1.01 ??g/L (blood), 0.14 ??g/g (hair), 0.31 ??g/g (toenails), and 0.31 ??g/g (fingernails). Biomarkers of mercury exposure for study participants from Horlivka and Artemivsk are low in comparison with occupationally exposed workers at a mercury recycling facility in Horlivka and in comparison with exposures known to be associated with clinical effects. Blood and urinary mercury did not suggest a higher mercury exposure among Horlivka residents as compared with Artemivsk; however, three individuals living in the immediate vicinity of the mercury mines had elevated blood and urinary mercury, relative to overall results for either city. For a limited number of residents from Horlivka (N = 7) and Artemivsk (N = 4), environmental samples (vacuum cleaner dust, dust wipes, soil) were collected from their residences. Mercury concentrations in vacuum cleaner dust and soil were good predictors of blood and urinary mercury. Copyright ?? 2011 JOEH, LLC.

Perioral Dermatitis after Dental Filling in a 12-Year-Old Girl: Involvement of Cholinergic System in Skin Neuroinflammation?

Directory of Open Access Journals (Sweden)

Fabrizio Guarneri

2008-01-01

Full Text Available The etiopathogenesis of perioral dermatitis (PD is still unknown and, consequently, medical treatment is difficult, not precisely defined, and often unsatisfactory. On the basis of a peculiar case that appeared soon after multiple dental fillings with a mercury-containing amalgam, we proposed that neurogenic inflammation could play a role in the pathogenesis of PD. According to the new findings provided by clinical and basic research, neurogenic inflammation has a relevant part in the pathogenesis of many cutaneous diseases. We report a similar case of PD, taking into account, more specifically, the possible involvement of the cholinergic system. Also in this case, PD seems to be mainly related to the mercury contained in dental fillings and/or its organic compounds formed by oral/gut bacteria. We examined the possible role of these substances as causes of PD, providing new information on the possible cross-talk between neuroimmunodermatology and potential triggers of PD.

BACTERIAL ADHESION TO DENTAL AMALGAM AND 3 RESIN COMPOSITES

NARCIS (Netherlands)

SULJAK, JP; REID, G; WOOD, SM; MCCONNELL, RJ; VANDERMEI, HC; BUSSCHER, HJ

Objectives: The ability of three oral bacteria to adhere to hydrophobic amalgam (water contact angle 60 degrees) and hydrophobic resin composites (Prisma-AP.H 56 degrees, Herculite XRV 82 degrees and Z100 89 degrees) was compared using an in vitro assay. Methods and results: Following preincubation

Potential of Brass to Remove Inorganic Hg(II) from Aqueous Solution through Amalgamation.

Science.gov (United States)

Wenke, Axel; Bollen, Anne; Richard, Jan-Helge; Biester, Harald

2016-06-01

Brass shavings (CuZn45) were tested for their efficiency to remove Hg(II) from contaminated groundwater through amalgamation. The study was focused on long-term retention efficiency, the understanding of the amalgamation process and kinetics, and influences of filter surface alteration. Column tests were performed with brass filters (thickness 3 to 9 cm) flushed with 1000 μg/L Hg solution for 8 hours under different flow rates (300 to 600 mL/h). Brass filters consistently removed >98% of Hg from solution independent of filter thickness and flow rate. In a long-term experiment (filter thickness 2 cm), Hg retention decreased from 96 to 92% within 2000 hours. Batch and column experiments for studying kinetics of Hg removal indicate ~100% Hg removal from solution within only 2 hours. Solid-phase mercury thermo-desorption analysis revealed that Hg(0) diffusion into the brass surface controls kinetics of mercury retention. Brass surface alteration could be observed, but did not influence Hg retention.

Study of tin amalgam mirrors by {sup 119}Sn Mössbauer spectroscopy and other analytical methods

Energy Technology Data Exchange (ETDEWEB)

Lerf, A. [Bavarian Academy of Sciences, Walther Meißner Institute (Germany); Wagner, F. E., E-mail: fwagner@tum.de [Technical University of Munich, Physics Department E15 (Germany); Herrera, L. K. [Universidad Nacional de Colombia. Dpto. de Ingeniería Mecánica y Mecatrónica (Colombia); Justo, A.; Mu noz-Páez, A.; Pérez-Rodríguez, J. L. [University of Sevilla-CSIC, ICMSE (Spain)

2016-12-15

From the beginning of the 16 {sup th} until the end of the 19 {sup th} century the most widely used mirrors consisted of a pane of glass backed with a reflecting layer of tin-mercury amalgam. They were made by sliding the glass pane over a tin foil covered with liquid mercury. After removal of the superfluous mercury, tin amalgam formed slowly at ambient temperature and yielded a reflecting layer adhering to the surface of the glass. Such mirrors often deteriorate in the course of time by oxidation of the tin in the amalgam to stannous or stannic oxide. {sup 119}Sn Mössbauer spectroscopy, scanning electron microscopy, micro-XRF and X-ray diffraction have been used to study this deterioration process. The studied specimens were a modern mirror made for the reconstruction of the Green Vault in Dresden in the early 2000s, two rather well preserved German mirrors from the 17 {sup th} and 19 {sup th} centuries and several strongly deteriorated specimens of Baroque mirrors from the south of Spain. The modern mirror consists mainly of a Sn{sub 0.9}Hg{sub 0.1} amalgam with only 2 % of SnO{sub 2}. The older German mirrors showed more pronounced oxidation, containing 12 and 15 % of SnO{sub 2}, which did not noticeably impair their reflectivity. In the samples from the Spanish mirrors at best a few percent of metallic phase was left. The majority of the tin had oxidised to SnO{sub 2}, but between 8 and 20 % of the tin was present as SnO. X-ray diffraction yielded similar results and micro-XRF mapping using synchrotron radiation for excitation gave information on the distribution of Sn and Hg in the reflecting layer of the mirrors.

Distribution and assessment of residual mercury from gold mining in Changbai Mountain Range Northeastern China

Science.gov (United States)

Meng, D.; Wang, N.; Ai, J. C.; Zhang, G.; Liu, X. J.

2016-08-01

Gold mining was first initiated in Jiapigou area, Huadian city of Northeastern China about 200 years ago. Before 2006, the mercury amalgamation technique was used in the gold mining process, which led to severe mercury contamination. The aim of this paper is to explore the influences of residual mercury on the environment media after eliminating the amalgamation process to extract gold. The mercury concentrations of the atmosphere and the soil were determined in autumn of 2011 and spring of 2012. The soil environmental quality was assessed by the index of geoaccumulation. The results indicated that the maximum value of gaseous mercury was 25ng•m-3 in autumn and 19.5ng•m-3 in spring; the maximum value of mercury in the soil was 2.06mg•kg-1 in autumn and 2.51mg•kg-1in spring. It can be seen that the peak concentrations of the gaseous mercury happened at the gold mine area and tailings, while the peak mercury concentrations in the soil were located at the places near the mining sites and the residential area in the valley. Furthermore, the regression analysis of the total mercury contents between the atmosphere and the soil showed a significant correlation, which indicated that there was certain circulation of the mercury between the regional atmosphere and soil. In general, after the elimination of the amalgamation technique in gold extraction, the distance to the mercury source, the special conditions of hilly weather and landforms and the mercury exchange flux are the main factors of mercury contamination.

Mercury in the environment : a primer

Energy Technology Data Exchange (ETDEWEB)

Lourie, B; Glenn, W [ed.; Ogilvie, K; Everhardus, E; Friesen, K; Rae, S

2003-06-01

This report provides an overview of the occurrence and effects of mercury in the environment and its impacts on human health. Low levels of mercury occur naturally everywhere in the environment in plants, animals, rocks and air. Incidental emissions occur when natural mercury is released to the environment through human activity. In Canada, coal burning and metal processing are the two largest point sources of atmospheric mercury emissions. Energy facilities have the option to invest in expensive control technologies for coal plants, or they can generate electricity from alternative energy sources. Energy conservation, however, offers the greatest overall benefits for the environment and the public. Mercury can also be released when products containing mercury (such as electrical switches, thermostats, dental amalgam, and thermometers) are broken while in use, or when they are crushed in garbage trucks and dumped in landfills. Source separation is the best way to reduce waste-related emissions. Once mercury is released to the natural environment, it can be transported long distances through air or watercourses. It is volatile, therefore evaporates readily to the atmosphere where it may do one of three things: it may fall out near the point where it was emitted; it may be transported long distances to some point downwind; or, it may enter the global atmospheric mercury pool where it will circle the globe for a year or more within the Earth's major weather systems before being deposited. Data from Canada's National Pollutant Release Inventory indicates that mercury releases and transfers total 28,674 kg per year. The most critical component of the mercury cycle is the conversion of inorganic forms of mercury to the organic compound methylmercury which is more toxic to humans. Most concern about mercury focuses on lakes and other aquatic ecosystems. Fish in hydroelectric reservoirs have been found to contain elevated methylmercury levels because natural mercury in the

Mechanical behaviour of dental composite filling materials using digital holography

OpenAIRE

Monteiro, J.M.; Lopes, H.; Vaz, M.A.P.; Campos, J.C. Reis

2010-01-01

One of the most common clinical problems in dentistry is tooth decay. Among the dental filling materials used to repair tooth structure that has been destroyed by decay are dental amalgam and composite materials based on acrylics. Dental amalgam has been used by dentists for the past 150 years as a dental restorative material due to its low cost, ease of application, strength, durability, and bacteriostatic effects. However its safety as a filling material has been questioned due to th...

Staining of dentin from amalgam corrosion is induced by demineralization

NARCIS (Netherlands)

Scholtanus, J.D.; van der Hoorn, W.; Özcan, M.; Huysmans, M.C.D.N.J.M.; Roeters, J.F.M.; Kleverlaan, C.J.; Feilzer, A.J.

2013-01-01

PURPOSE: To evaluate the effect of artificial demineralization upon color change of dentin in contact with dental amalgam. METHODS: Sound human molars (n = 34) were embedded in resin and coronal enamel was removed. Dentin was exposed to artificial caries gel (pH 5.5) at 37 degrees C for 12 weeks (n

Staining of dentin from amalgam corrosion is induced by demineralization

NARCIS (Netherlands)

Scholtanus, Johannes D.; van der Hoorn, Wietske; Huysmans, Marie-Charlotte D. N. J. M.; Roeters, Joost F. M.; Kleverlaan, Cornelis J.; Feilzer, Albert J.; Ozcan, Mutlu

Purpose: To evaluate the effect of artificial demineralization upon color change of dentin in contact with dental amalgam. Methods: Sound human molars (n= 34) were embedded in resin and coronal enamel was removed. Dentin was exposed to artificial caries gel (pH 5.5) at 37 degrees C for 12 weeks (n=

Study of tin amalgam mirrors by "1"1"9Sn Mössbauer spectroscopy and other analytical methods

International Nuclear Information System (INIS)

Lerf, A.; Wagner, F. E.; Herrera, L. K.; Justo, A.; Mu noz-Páez, A.; Pérez-Rodríguez, J. L.

2016-01-01

From the beginning of the 16 "t"h until the end of the 19 "t"h century the most widely used mirrors consisted of a pane of glass backed with a reflecting layer of tin-mercury amalgam. They were made by sliding the glass pane over a tin foil covered with liquid mercury. After removal of the superfluous mercury, tin amalgam formed slowly at ambient temperature and yielded a reflecting layer adhering to the surface of the glass. Such mirrors often deteriorate in the course of time by oxidation of the tin in the amalgam to stannous or stannic oxide. "1"1"9Sn Mössbauer spectroscopy, scanning electron microscopy, micro-XRF and X-ray diffraction have been used to study this deterioration process. The studied specimens were a modern mirror made for the reconstruction of the Green Vault in Dresden in the early 2000s, two rather well preserved German mirrors from the 17 "t"h and 19 "t"h centuries and several strongly deteriorated specimens of Baroque mirrors from the south of Spain. The modern mirror consists mainly of a Sn_0_._9Hg_0_._1 amalgam with only 2 % of SnO_2. The older German mirrors showed more pronounced oxidation, containing 12 and 15 % of SnO_2, which did not noticeably impair their reflectivity. In the samples from the Spanish mirrors at best a few percent of metallic phase was left. The majority of the tin had oxidised to SnO_2, but between 8 and 20 % of the tin was present as SnO. X-ray diffraction yielded similar results and micro-XRF mapping using synchrotron radiation for excitation gave information on the distribution of Sn and Hg in the reflecting layer of the mirrors.

The Copper concentration variation to physical properties of high copper amalgam alloy

Directory of Open Access Journals (Sweden)

Aminatun Aminatun

2006-09-01

Full Text Available The function of copper (Cu inside amalgam is to increase hardness and impact force and to decrease thermal expansion coefficient. In general, amalgam which is used in dentistry and available in the market is contain Cu 22%, while the maximum Cu concentration is 30%. It is necessary to determine the concentration Cu does generate the best physical properties to be used as dental restorative agent. Amalgam is made by mixing blended-metal Ag-Sn-Cu (with Cu concentration of 13%, 21%, 22%, and 29% and Hg, stirred manually in a bowl for 15 minutes,leave it in temperature 27°C for 24 hours to become hardened. The result of X-Ray Diffractometer (XRD, analyzed by Rietveld method and Rietica program, shows amalgam with Cu 29% concentration for Cu3Sn compound density is 31.790 sma/Å3, for Ag2Hg3 compound is 41.733 sma/ Å3, a Cu3Sn relative weight percentage of 43.23%, Ag2Hg3 of 54.54%, Cu 7Hg6 of 2.23% and hardness of Cu 29% is 90.700 ± 0.005 kgf/mm2. These numbers are the highest values on Cu 29% concentrations compared to other copper concentration variants. Whereas amalgam thermal expansion coefficient on Cu 29% is (2.17 ± 0.9110-3 mm/°C is the lowest value compared to other Cu concentration. The conclution is that adding Cu concentration into amalgam will increase density value, Cu3Sn relative weight percentage, hardness level and will decrease amalgam thermal expansion coefficient. Amalgam 29% Cu concentration has better physical properties compared to amalgam Cu 22% concentration.

Adherence of Streptococcus Mutans to Microhybrid and Nanohybrid Resin Composites and Dental Amalgam: An In Vitro Study

Directory of Open Access Journals (Sweden)

Fariba Motevasselian

2017-12-01

Full Text Available Objectives: Streptococcus mutans (S. mutans is a cariogenic microorganism. The restorative materials which harbor a biofilm with high levels of S. mutans can accelerate the occurrence of dental caries. The purpose of this study was to evaluate the influence of different restorative materials on S. mutans colonization in a simple in-vitro biofilm formation model.Materials and Methods: Thirteen discs of each material (nanohybrid resin composite, microhybrid resin composite, and amalgam were prepared, polished, and sterilized in a gamma radiation chamber. The saliva-free specimens were exposed to the S. mutans bacterial suspension (0.5 McFarland and were incubated for 4 hours. Afterwards, the specimens were rinsed and sonicated in normal saline. 10µl of the obtained suspension was cultured in a sterile blood agar medium. After 24 hours, the number of colony forming units (CFU of S. mutans was counted. A sterility test control was considered for each group of materials. The data were analyzed by one-way ANOVA at 5% significance level.Results: The means and standard deviations of the logarithmic values of the colonies on the surfaces of amalgam, microhybrid, and nanohybrid resin composites were equal to 3.76±0.64, 3.91±0.52 and 3.34±0.74, respectively.Conclusions: There were no significant differences between the restorative materials in terms of S. mutans adhesion rate. The evaluated resin composites showed comparable numbers of CFUs, which could imply the importance of the polishing procedures.

Hair Mercury Levels in Six Iranian Sub-populations for Estimation of Methylmercury Exposure: A Mini-review

Directory of Open Access Journals (Sweden)

Abbas Esmaili-Sari

2012-01-01

Full Text Available Background: Mercury is widespread and persistent in the environment. One organicform of mercury, Methylmercury (MeHg, can accumulate in the food chain in aquaticecosystems and lead to high concentrations of MeHg in fish, which, when consumed byhumans, can result in an increased risk of adverse effects. Currently, the Joint FAO/WHOExpert Committee on Food Additives (JECFA has established provisional tolerableweekly intakes (PTWIs for total mercury at 5 μg/kg body weight and for methylmercury at1.6 μg/kg body weight. Mercury concentration in blood or hair has been widely used forestimation of methylmercury exposure.Materials and Methods: In this review article, we calculated methylmercury exposurefrom hair mercury levels among six subpopulations (i.e. students, dentists, dental nurses,women with amalgam fillings, pregnant women in Mahshahr, and Women of a port town,Mahshahr, Iran. Some of the experiments had been performed by this group in previousyears.Results: The mean exposure level (μg/kg bw/day in three Iranian groups (dentists,pregnant women, and women in Mahshahr was higher than RfD and PTWIs.Conclusion: As people are exposed to methylmercury mainly through their diet,especially from fish and other marine species, pregnant women should reduce fishconsumption, especially predatory fish, and dentists should use preventive measures (likemasks and gloves.

Flow Injection Analysis of Mercury Using 4-(Dimethylamino Benzaldehyde-4-Ethylthiosemicarbazone as the Ionophore of a Coated Wire Electrode

Directory of Open Access Journals (Sweden)

Sulaiman Ab Ghani

2012-11-01

Full Text Available A flow injection analysis (FIA incorporating a thiosemicarbazone-based coated wire electrode (CWE was developed method for the determination of mercury(II. A 0.1 M KNO3 carrier stream with pH between 1 and 5 and flow rate of 1 mL·min−1 were used as optimum parameters. A linear plot within the concentration range of 5 × 10−6–0.1 M Hg(II, slope of 27.8 ± 1 mV per decade and correlation coefficient (R2 of 0.984 were obtained. The system was successfully applied for the determination of mercury(II in dental amalgam solutions and spiked environmental water samples. Highly reproducible measurements with relative standard deviation (RSD < 1% (n = 3 were obtained, giving a typical throughput of 30 samples·h−1.

Crystallic silver amalgam--a novel electrode material.

Science.gov (United States)

Danhel, Ales; Mansfeldova, Vera; Janda, Pavel; Vyskocil, Vlastimil; Barek, Jiri

2011-09-21

A crystallic silver amalgam was found to be a suitable working electrode material for voltammetric determination of electrochemically reducible organic nitro-compounds. Optimum conditions for crystal growth were found, the crystal surface was investigated by atomic force microscopy in tapping mode and single crystals were used for the preparation of quasi-cylindrical single crystal silver amalgam electrode (CAgAE). An electrochemical behavior of this alternative electrode material was investigated in aqueous media by direct current voltammetry, cyclic voltammetry (CV), differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) using 4-nitrophenol as a model compound. Applicable potential windows of the CAgAE were found comparable with those obtained at a hanging mercury drop electrode, providing high hydrogen overpotential, and polished silver solid amalgam electrode. Thanks to the smooth single crystal electrode surface, the effect of the passivation is not too pronounced, direct DPV determination of 100 μmol l(-1) of 4-nitrophenol at CAgAEs in 0.2 mol l(-1) acetate buffer pH 4.8 provides a RSD around 1.5% (n = 15). DPV calibration curves of 4-nitrophenol are linear in the whole concentration range 1-100 μmol l(-1) with a limit of quantification of 1.5 μmol l(-1). The attempt to increase sensitivity by application of AdSV was not successful. The mechanism of 4-nitrophenol reduction at CAgAE was investigated by CV.

Silver Solid Amalgam Electrode as a Tool for Monitoring the Electrochemical Reduction of Hydroxocobalamin

Czech Academy of Sciences Publication Activity Database

Bandžuchová, L.; Šelešovská, R.; Navrátil, Tomáš; Chýlková, J.

2013-01-01

Roč. 25, č. 1 (2013), s. 213-222 ISSN 1040-0397 R&D Projects: GA ČR GAP206/11/1638; GA ČR(CZ) GAP208/12/1645 Institutional support: RVO:61388955 Keywords : cobalamin * hanging mercury drop electrode * silver solid amalgam electrode Subject RIV: CG - Electrochemistry Impact factor: 2.502, year: 2013

Evaluation of patients with oral lichenoid lesions by dental patch testing and results of removal of the dental restoration material

Directory of Open Access Journals (Sweden)

Emine Buket Şahin

2016-12-01

Full Text Available Background and Design: Oral lichenoid lesions (OLL are contact stomatitis characterized by white reticular or erosive patches, plaque-like lesions that are clinically and histopathologically indistinguishable from oral lichen planus (OLP. Amalgam dental fillings and dental restoration materials are among the etiologic agents. In the present study, it was aimed to evaluate the standard and dental series patch tests in patients with OLL in comparison to a control group and evaluate our results. Materials and Methods: Thirty-three patients with OLL or OLP and 30 healthy control subjects, who had at least one dental restoration material and/or dental filling, were included in the study. Both groups received standard series and dental patch test and the results were evaluated simultaneously. Results: The most frequent allergens in the dental series patch test in the patient group were palladium chloride (n=4; 12.12% and benzoyl peroxide (n=2, 6.06%. Of the 33 patients with OLL; 8 had positive reaction to allergents in the standard patch test series and 8 had positive reaction in the dental patch test series. There was no significant difference in the rate of patch test reaction to the dental and standard series between the groups. Ten patients were advised to have the dental restoration material removed according to the results of the patch tests. The lesions improved in three patients [removal of all amalgam dental fillings (n=1, replacement of all amalgam dental fillings with an alternative filling material (n=1 and replacement of the dental prosthesis (n=1] following the removal or replacement of the dental restoration material. Conclusion: Dental patch test should be performed in patients with OLL and dental restoration material. Dental filling and/or prosthesis should be removed/replaced if there is a reaction against a dental restoration material-related allergen.

Methods to reduce mercury pollution is small gold mining operations

International Nuclear Information System (INIS)

Pantoja-Timaran, F.; Alvarez-Rodriguez, R.; Rodriguez-Avello, A. S.

2005-01-01

The use of mercury for gold beneficiation is still a current practice in small mining operations, mainly in underdeveloped countries, due to the low investment required and necessity of easy to operate systems. But the lack of basic protections makes unavoidable the high pollution of water streams, soils, and in fact, human bodies. some improvements have been done at site like that related to the removal of the mercury from the amalgam, that usually was done in the open air, and now have been changed to the utilization of artisan iron retorts which considerable reduce the emissions of mercury vapors to the atmosphere, but there are still high losses of mercury into the waste solids or tailings coming from the amalgamation process (nearly most of the total weight of the ore treated). In order to reduce the mercury losses into the tailings from the process, this research work has been based in the use of cheap systems, available to the isolated miners, to proof that it is feasible to get an important reduction of the losses and the pollution. the procedure has been accomplished by means of washing the ores with alkaline or detergent agents, together with the use of activated mercury purified by electrowinning in a simple device, easily manufactured in site by the own workers. It is also proven herewith that controlling the time of amalgamation and the total amount of mercury used could reduce the total pollution, and in addition, the gold recovery would be improved. This investigation reports the possibility of a reduction of mercury losses down to 2.4 g per 100 of gold produced (case of rich ores like LaBruja), with gold recovery up to 94%; and 8,6 g per 100 g of gold produced (from ores with average grades like La Gruesa), and gold recoveries in the range of 92%. All that is about 20 to 100 times lower than data reported in current bibliography. The introduction of a previous step of the ore concentration in shaking tables, decreases the total amount of solids for

Comparing and assessing different measurement techniques for mercury in coal systhesis gas

Energy Technology Data Exchange (ETDEWEB)

Maxwell, D.P.; Richardson, C.F. [Radian Corporation, Austin, TX (United States)

1995-11-01

Three mercury measurement techniques were performed on synthesis gas streams before and after an amine-based sulfur removal system. The syngas was sampled using (1) gas impingers containing a nitric acid-hydrogen peroxide solution, (2) coconut-based charcoal sorbent, and (3) an on-line atomic absorption spectrophotometer equipped with a gold amalgamation trap and cold vapor cell. Various impinger solutions were applied upstream of the gold amalgamation trap to remove hydrogen sulfide and isolate oxidized and elemental species of mercury. The results from these three techniques are compared to provide an assessment of these measurement techniques in reducing gas atmospheres.

Method validation for control determination of mercury in fresh fish and shrimp samples by solid sampling thermal decomposition/amalgamation atomic absorption spectrometry.

Science.gov (United States)

Torres, Daiane Placido; Martins-Teixeira, Maristela Braga; Cadore, Solange; Queiroz, Helena Müller

2015-01-01

A method for the determination of total mercury in fresh fish and shrimp samples by solid sampling thermal decomposition/amalgamation atomic absorption spectrometry (TDA AAS) has been validated following international foodstuff protocols in order to fulfill the Brazilian National Residue Control Plan. The experimental parameters have been previously studied and optimized according to specific legislation on validation and inorganic contaminants in foodstuff. Linearity, sensitivity, specificity, detection and quantification limits, precision (repeatability and within-laboratory reproducibility), robustness as well as accuracy of the method have been evaluated. Linearity of response was satisfactory for the two range concentrations available on the TDA AAS equipment, between approximately 25.0 and 200.0 μg kg(-1) (square regression) and 250.0 and 2000.0 μg kg(-1) (linear regression) of mercury. The residues for both ranges were homoscedastic and independent, with normal distribution. Correlation coefficients obtained for these ranges were higher than 0.995. Limits of quantification (LOQ) and of detection of the method (LDM), based on signal standard deviation (SD) for a low-in-mercury sample, were 3.0 and 1.0 μg kg(-1), respectively. Repeatability of the method was better than 4%. Within-laboratory reproducibility achieved a relative SD better than 6%. Robustness of the current method was evaluated and pointed sample mass as a significant factor. Accuracy (assessed as the analyte recovery) was calculated on basis of the repeatability, and ranged from 89% to 99%. The obtained results showed the suitability of the present method for direct mercury measurement in fresh fish and shrimp samples and the importance of monitoring the analysis conditions for food control purposes. Additionally, the competence of this method was recognized by accreditation under the standard ISO/IEC 17025.

Measurements of Mercury Released From Solidified/Stabilized Waste Forms-FY2002

International Nuclear Information System (INIS)

Mattus, C.H.

2003-01-01

This report covers work performed during FY 2002 in support of treatment demonstrations conducted for the U.S. Department of Energy (DOE) Mixed Waste Focus Area (MWFA) Mercury Working Group. To comply with the requirements of the Resource Conservation and Recovery Act, as implemented by the U.S. Environmental Protection Agency (EPA), DOE must use one of the following procedures for mixed low-level radioactive wastes containing mercury at levels above 260 ppm: a retorting/roasting treatment or (if the wastes also contain organics) an incineration treatment. The recovered radioactively contaminated mercury must then be treated by an amalgamation process prior to disposal. The DOE MWFA Mercury Working Group is working with EPA to determine whether some alternative processes could be used to treat these types of waste directly, thereby avoiding a costly recovery step for DOE. In previous years, demonstrations were performed in which commercial vendors applied their technologies for the treatment of radiologically contaminated elemental mercury as well as radiologically contaminated and mercury-contaminated waste soils from Brookhaven National Laboratory. The test results for mercury release in the headspace were reported in two reports, ''Measurements of Mercury Released from Amalgams and Sulfide Compounds'' (ORNL/TM-13728) and ''Measurements of Mercury Released from Solidified/Stabilized Waste Forms'' (ORNL/TM-2001/17). The current work did not use a real waste; a surrogate sludge had been prepared and used in the testing in an effort to understand the consequences of mercury speciation on mercury release

Ratio of tritiated water and hydrogen generated in mercury through a nuclear reaction

Energy Technology Data Exchange (ETDEWEB)

Manabe, K. [Nuclear Science and Engineering Directorate, Japan Atomic Energy Agency (JAEA), Tokai, Naka-gun, Ibaraki 319-1195 (Japan)], E-mail: manabe.kentaro@jaea.go.jp; Yokoyama, S. [Nuclear Science and Engineering Directorate, Japan Atomic Energy Agency (JAEA), Tokai, Naka-gun, Ibaraki 319-1195 (Japan)

2008-02-15

Tritium generated in a mercury target is a source of potential exposure of personnel at high-energy accelerator facilities. Knowledge of the chemical form of tritium is necessary to estimate the internal doses. We studied the tritium generation upon thermal neutron irradiation of a mercury target modified into liquid lithium amalgam to examine the ratio of tritiated water ([{sup 3}H]H{sub 2}O) and tritiated hydrogen ([{sup 3}H]H{sub 2}). The ratio between [{sup 3}H]H{sub 2}O and [{sup 3}H]H{sub 2} generated in lithium amalgam was 4:6 under these experimental conditions.

A method for thickness determination of thin films of amalgamable metals by total-reflection X-ray fluorescence

International Nuclear Information System (INIS)

Bennun, L.; Greaves, E.D.; Barros, H.; Diaz-Valdes, J.

2009-01-01

A method for thickness determination of thin amalgamable metallic films by total-reflection X-ray fluorescence (TXRF) is presented. The peak's intensity in TXRF spectra are directly related to the surface density of the sample, i.e. to its thickness in a homogeneous film. Performing a traditional TXRF analysis on a thin film of an amalgamated metal, and determining the relative peak intensity of a specific metal line, the layer thickness can be precisely obtained. In the case of gold thickness determination, mercury and gold peaks overlap, hence we have developed a general data processing scheme to achieve the most precise results.

Mercury balance analysis

International Nuclear Information System (INIS)

Maag, J.; Lassen, C.; Hansen, E.

1996-01-01

A detailed assessment of the consumption of mercury, divided into use areas, was carried out. Disposal and emissions to the environment were also qualified. The assessment is mainly based on data from 1992 - 1993. The most important source of emission of mercury to air is solid waste incineration which is assessed in particular to be due to the supply of mercury in batteries (most likely mercury oxide batteries from photo equipment) and to dental fillings. The second most important source of mercury emission to air is coal-fired power plants which are estimated to account for 200-500 kg of mercury emission p.a. Other mercury emissions are mainly related to waste treatment and disposal. The consumption of mercury is generally decreasing. During the period from 1982/83 - 1992-93, the total consumption of mercury in Denmark was about halved. This development is related to the fact that consumption with regard to several important use areas (batteries, dental fillings, thermometers etc.) has been significantly reduced, while for other purposes the use of mercury has completely, or almost disappeared, i.e. (fungicides for seed, tubes etc.). (EG)

Monitoring of mercury concentration in atmosphere in Usti nad Labem

International Nuclear Information System (INIS)

Synek, V.; Baloch, T.; Otcenasek, J.; Kremlova, S.; Subrt, P.

2007-01-01

This study elaborates the observation of mercury pollution of the atmosphere in the city of Usti nad Labem. The biggest source of the polluting mercury in Usti nad Labem is the chlor-alkali production in the factory of Spolchemie Inc. The method of mercury determination applied is based on capturing the mercury contented in a volume of the air on an amalgamator and measuring the mercury by an atomic absorption spectrometer (Perkin -Elmer 4100ZL) equipped with a special adapter after a thermal release of the mercury from the amalgamator. The basic characteristics of this method were evaluated; e.g. the limit of detection and limit of determination are, respectively, 0.43 and 1.4 ng/m 3 , the relative expanded uncertainty is 28 %. The work gives results of long-term (1998-2006) observations in a few localities in Usti nad Labem situated in various distances from the mercury source (e.g. means of 28.6 and 14.1 ng/m3 were obtained, respectively, in places 350 and 700 m far from the electrolysis plant) and also in a different city (Duchcov). The cases with a higher mercury concentration are very frequent so the sets of the obtained results have lognormal distributions. This study statistically compares the total level and variability of the mercury concentrations in the time series. It also investigates their trends, correlations between them and meteorological influences upon the levels of mercury concentration in the air. The effect of the mercury emission from the chlor-alkali plant is dominant. It as the only factor determines when the cases with a high mercury concentration in the atmosphere occur. (author)

DEVELOPMENT AND SELECTION OF TECHNOLOGIES FOR MERCURY MANAGEMENT ON U.S. DEPARTMENT OF ENERGY SITES: THE MER01-MER04 AND MERCURY SPECIATION DEMONSTRATIONS

International Nuclear Information System (INIS)

Morris, Michael I.; Hulet, Greg A.

2003-01-01

The U.S. Department of Energy's (DOE's) Transuranic and Mixed Waste Focus Area (TMFA), funded from fiscal year (FY) 1996 though FY 2002, was tasked with finding solutions for the mixed waste treatment problems of the DOE complex. During TMFA's initial technical baseline development process, three of the top four technology deficiencies identified were the need for amalgamation, stabilization, and separation/removal technologies for the treatment of mercury-contaminated mixed waste. The Mercury Working Group (HgWG), a selected group of representatives from DOE sites with significant mercury waste inventories, assisted TMFA in soliciting, identifying, initiating, and managing efforts to address these areas. Solicitations and contract awards were made to the private sector to demonstrate both the amalgamation and stabilization processes using both actual mixed wastes and surrogate samples. The goal was to develop separation and removal processes that will meet DOE's needs. This paper discusses the technology selection process, development activities, and the accomplishments of TMFA through these various activities

Measures and experiments to the reduction of mercury in the waste recycling plant Bonn. The gold amalgam procedure - Attempt of precipitation in the scrubber with TMT 15 - enrichment of the Dioxorb absorbent with activated charcoal; Massnahmen und Versuche zur Quecksilberminderung in der Abfallverwertungsanlage Bonn. Das Gold-Amalgamverfahren: Faellungsversuch im Waescher mit TMT 15 - Anreicherung des Dioxorb-Absorbens mit Aktivkohle

Energy Technology Data Exchange (ETDEWEB)

Heidrich, R. [Muellverwertungsanlage Bonn GmbH, Bonn (Germany)

2007-07-01

MVA Bonn GmbH (Bonn, Federal Republic of Germany) operates a plant for the thermal utilization of settlement wastes. The author of the contribution under consideration reports on measures and attempts according to the reduction of mercury in the waste processing plant Bonn. In particular, three procedures are discussed: (a) The gold amalgam procedure; (b) attempt of precipitation in the scrubber with TMT-15; (c) enrichment of the adsorbent Dioxorb with activated charcoal. The gold amalgam procedure is a reliable procedure for the reduction of the mercury content in exhaust gases. Additionally, it is a very expensive procedure. The filling material containers of all three procedures should be replaced in the next revisions gradually with new containers. The danger of an enrichment of considerable quantities of mercury on the filling material packing is large. A further possibility is the filling of the finished solution over a mist eliminator. Here the danger of the blockage plays a substantial role. A thorough and reliable lowering of the mercury emission can be achieved by means of the active charcoal containing Dioxorb.

An interview study of persons who attribute health problems to dental filling materials--part two in a triangulation study on 65 and 75 years old Swedes.

Science.gov (United States)

Ståhlnacke, Katri; Söderfeldt, Björn

2013-01-01

Dental materials are perceived as a health problem by some people, although scientists do not agree about possible causes of such problems. The aim of this paper was to gain a deeper knowledge and understanding of experiences from living with health problems attributed to dental materials. Addressed topics were the type of problem, both as to general and oral health, perceived causes of the problems,their experienced effect on life, and reception by health professionals. Persons, who in a previous large questionnaire study had answered that they had experienced troubles from dental materials and also agreed to answer follow-up questions, were contacted with a request to take part in an interview study. Eleven individual interviews were held.The interviews were transcribed verbatim and the material was analysed according to the Qualitative Content Analysis method. Meaning units were extracted and condensed into a number of codes, which were combined into subcategories, categories, and themes. Four themes were identified: 1) Long-term oral, mental, and somatic difficulties of varying character, caused by dental amalgam. 2) Problems treated mainly by replacement of dental material in fillings. 3) Powerful effects on life, mostly negative. 4) The reception by health professionals was generally good, but with elements of encounters where they felt treated with nonchalance and lack of respect. In conclusion, people who attributed their health difficulties to dental materials had a complex range of problems and the perception was that amalgam/mercury was the cause of the troubles. The reception from health professionals was perceived as generally good, although with occasional negative experiences.

An Investigation of Modifying Effects of Metallothionein Single-Nucleotide Polymorphisms on the Association between Mercury Exposure and Biomarker Levels

Science.gov (United States)

Wang, Yi; Goodrich, Jaclyn M.; Gillespie, Brenda; Werner, Robert; Basu, Niladri

2012-01-01

Background: Recent studies have suggested that several genes that mediate mercury metabolism are polymorphic in humans. Objective: We hypothesized that single-nucleotide polymorphisms (SNPs) in metallothionein (MT) genes may underlie interindividual differences in mercury biomarker levels. We studied the potential modifying effects of MT SNPs on mercury exposure–biomarker relationships. Methods: We measured total mercury in urine and hair samples of 515 dental professionals. We also surveyed occupational and personal exposures to dental amalgam and dietary fish consumption, from which daily methylmercury (MeHg) intake was estimated. Log-transformed urine and hair levels were modeled in multivariable linear regression separately against respective exposure surrogates, and the effect modification of 13 MT SNPs on exposure was investigated. Results: The mean mercury levels in urine (1.06 μg/L) and hair (0.51 μg/g) were not significantly different from the U.S. general population (0.95 μg/L and 0.47 μg/g, respectively). The mean estimated daily MeHg intake was 0.084 μg/kg/day (range, 0–0.98 μg/kg/day), with 25% of study population intakes exceeding the current U.S. Environmental Protection Agency reference dose of 0.1 μg/kg/day. Multivariate regression analysis showed that subjects with the MT1M (rs2270837) AA genotype (n = 10) or the MT2A (rs10636) CC genotype (n = 42) had lower urinary mercury levels than did those with the MT1M or MT2A GG genotype (n = 329 and 251, respectively) after controlling for exposure and potential confounders. After controlling for MeHg intake, subjects with MT1A (rs8052394) GA and GG genotypes (n = 24) or the MT1M (rs9936741) TT genotype (n = 459) had lower hair mercury levels than did subjects with MT1A AA (n = 113) or MT1M TC and CC genotypes (n = 15), respectively. Conclusion: Our findings suggest that some MT genetic polymorphisms may influence mercury biomarker concentrations at levels of exposure relevant to the general

Final disposal options for mercury/uranium mixed wastes from the Oak Ridge Reservation

International Nuclear Information System (INIS)

Gorin, A.H.; Leckey, J.H.; Nulf, L.E.

1994-01-01

Laboratory testing was completed on chemical stabilization and physical encapsulation methods that are applicable (to comply with federal and state regulations) to the final disposal of both hazardous and mixed hazardous elemental mercury waste that is in either of the following categories: (1) waste generated during decontamination and decommissioning (D and D) activities on mercury-contaminated buildings, such as Building 9201-4 at the Oak Ridge Y-12 Plant, or (2) waste stored and regulated under either the Federal Facilities Compliance Agreement or the Federal Facilities Compliance Act. Methods were used that produced copper-mercury, zinc-mercury, and sulfur-mercury materials at room temperature by dry mixing techniques. Toxicity Characteristic Leaching Procedure (TCLP) results for mercury on batches of both the copper-mercury and the sulfur-mercury amalgams consistently produced leachates with less than the 0.2-mg/L Resource Conservation and Recovery Act (RCRA) regulatory limit for mercury. The results clearly showed that the reaction of mercury with sulfur at room temperature produces black mercuric sulfide, a material that is well suited for land disposal. The results also showed that the copper-mercury and zinc-mercury amalgams had major adverse properties that make them undesirable for land disposal. In particular, they reacted readily in air to form oxides and liberate elemental mercury. Another major finding of this study is that sulfur polymer cement is potentially useful as a physical encapsulating agent for mercuric sulfide. This material provides a barrier in addition to the chemical stabilization that further prevents mercury, in the form of mercuric sulfide, from migrating into the environment

Exposure of Small-Scale Gold Miners in Prestea to Mercury, Ghana, 2012.

Science.gov (United States)

Mensah, Ebenezer Kofi; Afari, Edwin; Wurapa, Frederick; Sackey, Samuel; Quainoo, Albert; Kenu, Ernest; Nyarko, Kofi Mensah

2016-01-01

Small-scale gold miners in Ghana have been using mercury to amalgamate gold for many years. Mercury is toxic even at low concentration. We assessed occupational exposure of small-scale gold miners to mercury in Prestea, a gold mining town in Ghana . We conducted a cross-sectional study in which we collected morning urine samples from 343 small-scale gold miners and tested for elemental mercury. Data on small-scale gold miner's socio-demographics, adverse health effects and occupational factors for mercury exposure were obtained and analyzed using SPSS Version 16 to determine frequency and percentage. Bivariate analysis was used to determine occupational factors associated with mercury exposure at 95% confidence level. The mean age of the small-scale gold miners was 29.5 ±9.6 years, and 323(94.20%) were males. One hundred and sixty (46.65%) of the small-scale gold miners had urine mercury above the recommended exposure limit (mercury exposure among those who have previously worked at other small-scale gold mines (χ 2 =4.96, p=0.03). The use of personal protective equipment among the small-scale gold miners was low. Retorts, which are globally recommended for burning amalgam, were not found at mining sites. A large proportion of small-scale gold miners in Prestea were having mercury exposure in excess of occupational exposure limits, and are at risk of experiencing adverse health related complications. Ghana Environmental Protection Agency should organize training for the miners.

Application of mercury cathode electrolysis to fission-product separation

International Nuclear Information System (INIS)

Besson, A.; Prigent, Y.; Van-Kote, F.

1969-01-01

A method involving controlled potential mercury cathode electrolysis has been developed to separate fission products. It allows the radiochemical determination of Ag, Cd, Pd, Rh, Ru, Sn, Te, Sb and Mo from solutions of fission products highly concentrated in mineral salts. The general procedure consists in three main steps: electrolytic amalgam generation, destruction of amalgams and ultimate purification of elements by other means. Electrolytic operations last about five hours. Chemical yields lie between 10 per cent and 70 per cent. (authors) [fr

Validation of an analytical method for the determination of total mercury in urine samples using cold vapor atomic absorption spectrometry (CV-AAS); Validacao de metodologia analitica para determinacao de mercurio total em amostras de urina para espectrometria de absorcao atomica com geracao de vapor frio (CV-AAS)

Energy Technology Data Exchange (ETDEWEB)

Guilhen, Sabine Neusatz

2009-07-01

Mercury (Hg) is a toxic metal applied to a variety of products and processes, representing a risk to the health of occupationally or accidentally exposed subjects. Dental amalgam is a restorative material composed of metallic mercury, which use has been widely debated in the last decades. Due to the dubiety of the studies concerning dental amalgam, many efforts concerning this issue have been conducted. The Tropical Medicine Foundation (Tocantins, Brazil) has recently initiated a study to evaluate the environmental and occupational levels of exposure to mercury in dentistry attendants at public consulting rooms in the city of Araguaina (TO). In collaboration with this study, the laboratory of analysis at IPEN's Chemistry and Environment Center is undertaking the analysis of mercury levels in exposed subjects' urine samples using cold vapor atomic absorption spectrometry. This analysis requires the definition of a methodology capable of generating reliable results. Such methodology can only be implemented after a rigorous validation procedure. As part of this work, a series of tests were conducted in order to confirm the suitability of the selected methodology and to assert that the laboratory addresses all requirements needed for a successful implementation of the methodology. The following parameters were considered in order to test the method's performance: detection and quantitation limits, selectivity, sensitivity, linearity, accuracy and precision. The assays were carried out with certified reference material, which assures the traceability of the results. Taking into account the estimated parameters, the method can be considered suitable for the afore mentioned purpose. The mercury concentration found for the reference material was of (95,12 +- 11,70)mug.L{sup -1} with a recovery rate of 97%. The method was also applied to 39 urine samples, six of which (15%) showing urinary mercury levels above the normal limit of 10{mu}g.L{sup -1}. The obtained results fall

Validation of an analytical method for the determination of total mercury in urine samples using cold vapor atomic absorption spectrometry (CV-AAS); Validacao de metodologia analitica para determinacao de mercurio total em amostras de urina para espectrometria de absorcao atomica com geracao de vapor frio (CV-AAS)

Energy Technology Data Exchange (ETDEWEB)

Guilhen, Sabine Neusatz

2009-07-01

Mercury (Hg) is a toxic metal applied to a variety of products and processes, representing a risk to the health of occupationally or accidentally exposed subjects. Dental amalgam is a restorative material composed of metallic mercury, which use has been widely debated in the last decades. Due to the dubiety of the studies concerning dental amalgam, many efforts concerning this issue have been conducted. The Tropical Medicine Foundation (Tocantins, Brazil) has recently initiated a study to evaluate the environmental and occupational levels of exposure to mercury in dentistry attendants at public consulting rooms in the city of Araguaina (TO). In collaboration with this study, the laboratory of analysis at IPEN's Chemistry and Environment Center is undertaking the analysis of mercury levels in exposed subjects' urine samples using cold vapor atomic absorption spectrometry. This analysis requires the definition of a methodology capable of generating reliable results. Such methodology can only be implemented after a rigorous validation procedure. As part of this work, a series of tests were conducted in order to confirm the suitability of the selected methodology and to assert that the laboratory addresses all requirements needed for a successful implementation of the methodology. The following parameters were considered in order to test the method's performance: detection and quantitation limits, selectivity, sensitivity, linearity, accuracy and precision. The assays were carried out with certified reference material, which assures the traceability of the results. Taking into account the estimated parameters, the method can be considered suitable for the afore mentioned purpose. The mercury concentration found for the reference material was of (95,12 +- 11,70)mug.L{sup -1} with a recovery rate of 97%. The method was also applied to 39 urine samples, six of which (15%) showing urinary mercury levels above the normal limit of 10{mu}g.L{sup -1}. The

Validation of an analytical method for the determination of total mercury in urine samples using cold vapor atomic absorption spectrometry (CV-AAS); Validacao de metodologia analitica para determinacao de mercurio total em amostras de urina por espectrometria de absorcao atomica com geracao de vapor frio (CV-AAS)

Energy Technology Data Exchange (ETDEWEB)

Guilhen, Sabine Neusatz

2009-07-01

Mercury (Hg) is a toxic metal applied to a variety of products and processes, representing a risk to the health of occupationally or accidentally exposed subjects. Dental amalgam is a restorative material composed of metallic mercury, which use has been widely debated in the last decades. Due to the dubiety of the studies concerning dental amalgam, many efforts concerning this issue have been conducted. The Tropical Medicine Foundation (Tocantins, Brazil) has recently initiated a study to evaluate the environmental and occupational levels of exposure to mercury in dentistry attendants at public consulting rooms in the city of Araguaina (TO). In collaboration with this study, the laboratory of analysis at IPEN's Chemistry and Environment Center is undertaking the analysis of mercury levels in exposed subjects' urine samples using cold vapor atomic absorption spectrometry. This analysis requires the definition of a methodology capable of generating reliable results. Such methodology can only be implemented after a rigorous validation procedure. As part of this work, a series of tests were conducted in order to confirm the suitability of the selected methodology and to assert that the laboratory addresses all requirements needed for a successful implementation of the methodology. The following parameters were considered in order to test the method’s performance: detection and quantitation limits, selectivity, sensitivity, linearity, accuracy and precision. The assays were carried out with certified reference material, which assures the traceability of the results. Taking into account the estimated parameters, the method can be considered suitable for the afore mentioned purpose. The mercury concentration found for the reference material was of (95,12 ± 11,70)μg.L{sup -1} with a recovery rate of 97%. The method was also applied to 39 urine samples, six of which (15%) showing urinary mercury levels above the normal limit of 10μg.L{sup −1}. The obtained

Mercury toxicokinetics-dependency on strain and gender

International Nuclear Information System (INIS)

Ekstrand, Jimmy; Nielsen, Jesper B.; Havarinasab, Said; Zalups, Rudolfs K.; Soederkvist, Peter; Hultman, Per

2010-01-01

Mercury (Hg) exposure from dental amalgam fillings and thimerosal in vaccines is not a major health hazard, but adverse health effects cannot be ruled out in a small and more susceptible part of the exposed population. Individual differences in toxicokinetics may explain susceptibility to mercury. Inbred, H-2-congenic A.SW and B10.S mice and their F1- and F2-hybrids were given HgCl 2 with 2.0 mg Hg/L drinking water and traces of 203 Hg. Whole-body retention (WBR) was monitored until steady state after 5 weeks, when the organ Hg content was assessed. Despite similar Hg intake, A.SW males attained a 20-30% significantly higher WBR and 2- to 5-fold higher total renal Hg retention/concentration than A.SW females and B10.S mice. A selective renal Hg accumulation but of lower magnitude was seen also in B10.S males compared with females. Differences in WBR and organ Hg accumulation are therefore regulated by non-H-2 genes and gender. Lymph nodes lacked the strain- and gender-dependent Hg accumulation profile of kidney, liver and spleen. After 15 days without Hg A.SW mice showed a 4-fold higher WBR and liver Hg concentration, but 11-fold higher renal Hg concentration, showing the key role for the kidneys in explaining the slower Hg elimination in A.SW mice. The trait causing higher mercury accumulation was not dominantly inherited in the F1 hybrids. F2 mice showed a large inter-individual variation in Hg accumulation, showing that multiple genetic factors influence the Hg toxicokinetics in the mouse. The genetically heterogeneous human population may therefore show a large variation in mercury toxicokinetics.

determination of mercury content in milk powder

International Nuclear Information System (INIS)

Jovchev, M.; Grigorov, T.; Apostolov, D.

1985-01-01

Four samples of humanized full cream cow milk powder of Bulgarian origin for new-born, sucklings, small children and soured milk powder were activated for 18-24 h in a neutron flux of 5.10 12 , resp. 2.10 13 n/cm 2 .sec in quartz ampules. The samples were activated without preliminary lyophilization, thus avoiding possible mistakes from mercury losses. Ag-110m, being eliminated in the amalgam, was not an obstacle to the mercury determination. The results obtained for the mercury content are in the same order as in other investigations and many times lower than the admissible norm for foodstuffs - 50 ppb

The mixed waste focus area mercury working group: an integrated approach for mercury treatment and disposal

International Nuclear Information System (INIS)

Conley, T.B.; Morris, M.I.; Holmes-Burns, H.; Petersell, J.; Schwendiman, L.

1997-01-01

In May 1996, the U.S. Department of Energy (DOE) Mixed Waste Focus Area (MWFA) initiated the Mercury Work Group (HgWG), which was established to address and resolve the issues associated with mercury- contaminated mixed wastes. Three of the first four technology deficiencies identified during the MWFA technical baseline development process were related to mercury amalgamation, stabilization, and separation/removal. The HgWG will assist the MWFA in soliciting, identifying, initiating, and managing all the efforts required to address these deficiencies. The focus of the HgWG is to better establish the mercury-related treatment needs at the DOE sites, refine the MWFA technical baseline as it relates to mercury treatment, and make recommendations to the MWFA on how to most effectively address these needs. The team will initially focus on the sites with the most mercury-contaminated mixed wastes, whose representatives comprise the HgWG. However, the group will also work with the sites with less inventory to maximize the effectiveness of these efforts in addressing the mercury- related needs throughout the entire complex

Measurements of Mercury Released from Solidified/Stabilized Waste Forms

International Nuclear Information System (INIS)

Mattus, C.H.

2001-01-01

This report covers work performed during FY 1999-2000 in support of treatment demonstrations conducted for the Mercury Working Group of the U.S. Department of Energy (DOE) Mixed Waste Focus Area. In order to comply with the requirements of the Resource Conservation and Recovery Act, as implemented by the U.S. Environmental Protection Agency (EPA), DOE must use one of these procedures for wastes containing mercury at levels above 260 ppm: a retorting/roasting treatment or an incineration treatment (if the wastes also contain organics). The recovered radioactively contaminated mercury must then be treated by an amalgamation process prior to disposal. The DOE Mixed Waste Focus Area and Mercury Working Group are working with the EPA to determine if some alternative processes could treat these types of waste directly, thereby avoiding for DOE the costly recovery step. They sponsored a demonstration in which commercial vendors applied their technologies for the treatment of two contaminated waste soils from Brookhaven National Laboratory. Each soil was contaminated with ∼4500 ppm mercury; however, one soil had as a major radioelement americium-241, while the other contained mostly europium-152. The project described in this report addressed the need for data on the mercury vapor released by the solidified/stabilized mixed low-level mercury wastes generated during these demonstrations as well as the comparison between the untreated and treated soils. A related work began in FY 1998, with the measurement of the mercury released by amalgamated mercury, and the results were reported in ORNL/TM-13728. Four treatments were performed on these soils. The baseline was obtained by thermal treatment performed by SepraDyne Corp., and three forms of solidification/stabilization were employed: one using sulfur polymer cement (Brookhaven National Laboratory), one using portland cement [Allied Technology Group (ATG)], and a third using proprietary additives (Nuclear Fuel Services)

Microscopy and certification as tools for environmentally benign, mercury-free small-scale gold mining.

Science.gov (United States)

Hylander, Lars D; Plath, David

2006-09-01

Small-scale gold miners lose annually 500-700 tonnes of mercury when amalgamating gold with mercury and subsequent burning. So far, mercury-free alternatives have been demanding more skill, time, or capital investments and the interest from the miners to reduce the mercury emissions has been limited. Recent development of mercury free methods, an increasing mercury price, and increased awareness of health and environmental damages caused by mercury is changing the attitudes. This trend could be spurred by certification of gold with added value due to clean production methods. Our objectives are to present a method to distinguish gold recovered without using mercury or harmful chemicals such as cyanide. Thereby, this gold could be certified and thus obtain a higher market price. The method is based on inspection of the gold grain surfaces with a light microscope. This method separated natural gold grains from gold recovered by amalgamation or cyanidation. The method also demonstrated different characteristics of gold grains from different gold fields and a basis for a catalogue with photomicrographs of gold grains from different gold fields has been established and partly presented in this article. In conclusion, studies of gold grains with a light microscope and photo documentation is an inexpensive but reliable method to distinguish environment-friendly recovered gold, which could be used for certification to get a higher market price.

Six-year success rates of occlusal amalgam and glass-ionomer restorations placed using three minimal intervention approaches.

NARCIS (Netherlands)

Mandari, G.J.; Frencken, J.E.F.M.; Hof, M.A. van 't

2003-01-01

The present randomised clinical trial was aimed at comparing three minimally invasive restorative treatment approaches for managing dental caries in occlusal surfaces using a non-gamma-2 amalgam and a low-viscosity glass-ionomer as the restorative material. The treatment approaches tested in

SU-E-T-365: Dosimetric Impact of Dental Amalgam CT Image Artifacts On IMRT and VMAT Head and Neck Plans

Energy Technology Data Exchange (ETDEWEB)

Cao, N; Young, L; Parvathaneni, U; Liao, J; Richard, P; Ford, E; Sandison, G [University of Washington, Department of Radiation Oncology, Seattle, WA (United States)

2014-06-01

Purpose: The presence of high density dental amalgam in patient CT image data sets causes dose calculation errors for head and neck (HN) treatment planning. This study assesses and compares dosimetric variations in IMRT and VMAT treatment plans due to dental artifacts. Methods: Sixteen HN patients with similar treatment sites (oropharynx), tumor volume and extensive dental artifacts were divided into two groups: IMRT (n=8, 6 to 9 beams) and VMAT (n=8, 2 arcs with 352° rotation). All cases were planned with the Pinnacle 9.2 treatment planning software using the collapsed cone convolution superposition algorithm and a range of prescription dose from 60 to 72Gy. Two different treatment plans were produced, each based on one of two image sets: (a)uncorrected; (b)dental artifacts density overridden (set to 1.0g/cm{sup 3}). Differences between the two treatment plans for each of the IMRT and VMAT techniques were quantified by the following dosimetric parameters: maximum point dose, maximum spinal cord and brainstem dose, mean left and right parotid dose, and PTV coverage (V95%Rx). Average differences generated for these dosimetric parameters were compared between IMRT and VMAT plans. Results: The average absolute dose differences (plan a minus plan b) for the VMAT and IMRT techniques, respectively, caused by dental artifacts were: 2.2±3.3cGy vs. 37.6±57.5cGy (maximum point dose, P=0.15); 1.2±0.9cGy vs. 7.9±6.7cGy (maximum spinal cord dose, P=0.026); 2.2±2.4cGy vs. 12.1±13.0cGy (maximum brainstem dose, P=0.077); 0.9±1.1cGy vs. 4.1±3.5cGy (mean left parotid dose, P=0.038); 0.9±0.8cGy vs. 7.8±11.9cGy (mean right parotid dose, P=0.136); 0.021%±0.014% vs. 0.803%±1.44% (PTV coverage, P=0.17). Conclusion: For the HN plans studied, dental artifacts demonstrated a greater dose calculation error for IMRT plans compared to VMAT plans. Rotational arcs appear on the average to compensate dose calculation errors induced by dental artifacts. Thus, compared to VMAT, density

Determination of mercury in hair: Comparison between gold amalgamation-atomic absorption spectrometry and mass spectrometry.

Science.gov (United States)

Domanico, Francesco; Forte, Giovanni; Majorani, Costanza; Senofonte, Oreste; Petrucci, Francesco; Pezzi, Vincenzo; Alimonti, Alessandro

2017-09-01

Mercury is a heavy metal that causes serious health problems in exposed subjects. The most toxic form, i.e., methylmercury (MeHg), is mostly excreted through human hair. Numerous analytical methods are available for total Hg analysis in human hair, including cold vapour atomic fluorescence spectrometry (CV-AFS), inductively coupled plasma mass spectrometry (ICP-MS) and thermal decomposition amalgamation atomic absorption spectrometry (TDA-AAS). The aim of the study was to compare the TDA-AAS with the ICP-MS in the Hg quantification in human hair. After the washing procedure to minimize the external contamination, from each hair sample two aliquots were taken; the first was used for direct analysis of Hg by TDA-AAS and the second was digested for Hg determination by the ICP-MS. Results indicated that the two data sets were fully comparable (median; TDA-AAS, 475ngg -1 ; ICP-MS, 437ngg -1 ) and were not statistically different (Mann-Whitney test; p=0.44). The two techniques presented results with a good coefficient of correlation (r=0.94) despite different operative ranges and method limits. Both techniques satisfied internal performance requirements and the parameters for method validation resulting sensitive, precise and reliable. Finally, the use of the TDA-AAS can be considered instead of the ICP-MS in hair analysis in order to reduce sample manipulation with minor risk of contamination, less time consuming due to the absence of the digestion step and cheaper analyses. Copyright © 2016 Elsevier GmbH. All rights reserved.

Total mercury levels in hair, toenail, and urine among women free from occupational exposure and their relations to renal tubular function

International Nuclear Information System (INIS)

Ohno, Tomoko; Sakamoto, Mineshi; Kurosawa, Tomoko; Dakeishi, Miwako; Iwata, Toyoto; Murata, Katsuyuki

2007-01-01

To investigate the relations among total mercury levels in hair, toenail, and urine, together with potential effects of methylmercury intake on renal tubular function, we determined their levels, and urinary N-acetyl-β-d-glucosaminidase activity (NAG) and α 1 -microglobulin (AMG) in 59 women free from occupational exposures, and estimated daily mercury intakes from fish and other seafood using a food frequency questionnaire. Mercury levels (mean+/-SD) in the women were 1.51+/-0.91μg/g in hair, 0.59+/-0.32μg/g in toenail, and 0.86+/-0.66μg/g creatinine in urine; and, there were positive correlations among them (P<0.001). The daily mercury intake of 9.15+/-7.84μg/day was significantly correlated with total mercury levels in hair, toenail, and urine (r=0.551, 0.537, and 0.604, P<0.001). Among the women, the NAG and AMG were positively correlated with both the daily mercury intake and mercury levels in hair, toenail, and urine (P<0.01); and, these relations were almost similar when using multiple regression analysis to adjust for possible confounders such as urinary cadmium (0.47+/-0.28μg/g creatinine) and smoking status. In conclusion, mercury resulting from fish consumption can explain total mercury levels in hair, toenail, and urine to some degree (about 30%), partly through the degradation into the inorganic form, and it may confound the renal tubular effect of other nephrotoxic agents. Also, the following equation may be applicable to the population neither with dental amalgam fillings nor with occupational exposures: [hair mercury (μg/g)]=2.44x[toenail mercury (μg/g)

The Mercury Problem in Artisanal and Small-Scale Gold Mining.

Science.gov (United States)

Esdaile, Louisa J; Chalker, Justin M

2018-05-11

Mercury-dependent artisanal and small-scale gold mining (ASGM) is the largest source of mercury pollution on Earth. In this practice, elemental mercury is used to extract gold from ore as an amalgam. The amalgam is typically isolated by hand and then heated-often with a torch or over a stove-to distill the mercury and isolate the gold. Mercury release from tailings and vaporized mercury exceed 1000 tonnes each year from ASGM. The health effects on the miners are dire, with inhaled mercury leading to neurological damage and other health issues. The communities near these mines are also affected due to mercury contamination of water and soil and subsequent accumulation in food staples, such as fish-a major source of dietary protein in many ASGM regions. The risks to children are also substantial, with mercury emissions from ASGM resulting in both physical and mental disabilities and compromised development. Between 10 and 19 million people use mercury to mine for gold in more than 70 countries, making mercury pollution from ASGM a global issue. With the Minamata Convention on Mercury entering force this year, there is political motivation to help overcome the problem of mercury in ASGM. In this effort, chemists can play a central role. Here, the problem of mercury in ASGM is reviewed with a discussion on how the chemistry community can contribute solutions. Introducing portable and low-cost mercury sensors, inexpensive and scalable remediation technologies, novel methods to prevent mercury uptake in fish and food crops, and efficient and easy-to-use mercury-free mining techniques are all ways in which the chemistry community can help. To meet these challenges, it is critical that new technologies or techniques are low-cost and adaptable to the remote and under-resourced areas in which ASGM is most common. The problem of mercury pollution in ASGM is inherently a chemistry problem. We therefore encourage the chemistry community to consider and address this issue that

Mercury in Some Lakes of Gold Mining Area of the Southern Ural

Directory of Open Access Journals (Sweden)

Tatsy Y. G.

2013-04-01

Full Text Available The mercury content in bottom sediments of Kalkan Lake, of the Uchala district, the Southern Ural. It was assumed that high concentrations of mercury in fish due to pollution of bottom sediments as a result of amalgamation at developing of gold placers. Detailed study of distribution of different elements in sediments show close association Hg with the chalcophylic elements, whose anomalies do not have technogenic nature. Association of mercury with the elements-companions of gold placers is evidence of basic contribution of natural mercury to its anomalous accumulation in sediments and fish. This is result of steady long-term natural mercury pollution.

Liquid-Mercury Free Silver Solid Amalgam Electrode - Tool for Electroanalysis of Organic Compounds

Czech Academy of Sciences Publication Activity Database

Šelešovská-Fadrná, R.; Navrátil, Tomáš; Vlček, Milan

2007-01-01

Roč. 52, č. 6 (2007), s. 911-929 ISSN 0009-2223 R&D Projects: GA ČR GA203/07/1195; GA MŠk(CZ) LC06035 Institutional research plan: CEZ:AV0Z40400503; CEZ:AV0Z40500505 Keywords : ascorbic acid * solid silver amalgam electrodes * cysteine * voltammetry Subject RIV: CG - Electrochemistry Impact factor: 0.529, year: 2007

Dosage du mercure dans le gaz naturel par absorption atomique sans flammes Mercury Titration in Natural Gas by Flameless Atomic Absorption

Directory of Open Access Journals (Sweden)

La Villa F.

2006-11-01

Full Text Available Cet article présente la méthode mise au point par l'Institut Français du Pétrole pour déterminer par absorption atomique sans flamme, les traces de mercure métallique contenu dans un gaz naturel. La méthode d'analyse nécessite une extraction du mercure soit sous forme d'ion mercurique en faisant passer le gaz dans une solution oxydante, soit sous forme d'amalgame avec de l'or ou de l'argent. Le premier mode opératoire s'applique aux échantillons dont la concentration en mercure est supérieure à I ttg/Nm3, le second pour des concentrations inférieures à 5 pg/Nm3. Les seuils de détection sont respectivement 10 ng (en solution et 0,3 ng (en amalgame. La répétabilité pour 100 ng de mercure (en amalgame est de ± 7% pour une probabilité de.95 %. En conclusion, dans un échantillon de gaz naturel, compte tenu du volume des prélèvements effectués, il est possible de détecter des concentrations de l'ordre du nanogramme de mercure par mètre cube de gaz. This article describes the method developed by IFP using flameless atomic absorption to determine metallic mercury traces in a natural gas. The analyst method requires a mercury extraction either in the form of mercuric ions by making the gas pass through an oxidizing solution or in the form of an amalgam with gold or silver. The former operating method applies ta samples having a mercury concentration greater than I !ag/Nm3, and the latter for concentrations smaller than 5 (-Lg/Nm3. Detection thresholds are respectively 10 ng (in solution and 0.3 ng (in amalgam. The repeatability for 100 ng of mercury (in amalgam is ± 7 % with a probability of 95%. To conclude, in a sample of natural gas, considering the volume of the samples taken, it is possible ta detect concentrations in the vicinity of one nanogrom of mercury per cubic meter of gas.

Effect of dental restorative materials on total antioxidant capacity and calcium concentration of unstimulated saliva.

Science.gov (United States)

Ramezani, Gholam H; Moghadam, Mona-Momeni; Saghiri, Mohammad-Ali; Garcia-Godoy, Franklin; Asatourian, Armen; Aminsobhani, Mohsen; Scarbecz, Mark; Sheibani, Nader

2017-01-01

To evaluate the effect of dental amalgam and composite restorations on total antioxidant capacity (TAC) and calcium (Ca) ion concentration of unstimulated saliva. Forty-eight children aged 6-10 years selected and divided into three groups of sixteen (8 males, 8 females). In group A and B, samples consisted of two class II dental composite or amalgam restorations, while in group C samples were caries-free (control group). Unstimulated saliva from all samples was collected and TAC was measured by spectrophotometry using an adaptation of 2, 2'-azino-di-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) assay. The Ca ion level was estimated by an auto- analyzer. Data were analyzed with one- and two-way ANOVA test, at a p difference between groups ( p differences within and between groups ( p Gender is an effective factor in changes induced in oral cavity as females showed more emphatic reaction to dental filling materials than males. Patients who have dental restorations, especially dental composites, should pay more attention to their dental hygiene, because dental restorations can increase oxidative stress and decrease Ca ion level in saliva, which might jeopardize remineralization process of tooth structures after demineralization. Key words: Amalgam, caries, composite, saliva, total antioxidant capacity.

Mercury use in small scale gold mining in Ghana: an assessment of its impact on miners

International Nuclear Information System (INIS)

Biagya, Robert Yakubu

2002-12-01

Small scale gold mining is responsible for about 5% of Ghana’s annual gold production. It is estimated that between 80,000 and 100,000 people are engaged in small scale gold mining either on part-time or permanent basis. Amalgamation is the preferred method used by small scale gold miners for extracting free gold from its ores. The rate at which mercury, an important input in this method, is discharged into the atmosphere and water bodies is alarming. This research describes the various mining and processing methods in small scale gold mining and the extent of mercury use and releases to the environment. It discusses mercury and its human and environmental effects. It defines the various forms of mercury, routes of exposure, toxic effects. The levels of exposure to mercury by all groups of small scale gold miners are determined, and the impacts on the miners and the environment are assessed. It concludes that: • Mercury is mainly released into the environment as a result of small scale gold mining through spillage of elemental mercury and evaporation of mercury from the amalgam and sponge gold when they are heated on open fire. • Mercury in environmental samples from small scale gold mining areas is well above standard limit values. • Mercury released into the environment through small scale gold mining impacts negatively on the miners themselves and the general environment. Finally, it recommends the need for the adoption of mercury emission reduction strategies for dealing with the mercury problem. (au)

Mechanisms and kinetics of electrodeposition of alkali metals on solid and liquid mercury electrodes

Energy Technology Data Exchange (ETDEWEB)

Lu, Wenzhe.

1993-01-01

Electroreduction of alkali metal ions at mercury is an important area in electrochemistry related to the battery industry. In this work, four major topics were considered: alkali metal/mercury interactions; electrosorption of alkali metal ions on solid mercury; electroreduction of alkali metal/crown ether complexes; and ammonium amalgam formation. The formation of alkali metal-mercury intermetallic compounds was studied on liquid and frozen thin layer mercury electrodes. The stoichiometry of the compounds produced under these conditions was determined using cyclic voltammetry. As expected, formation of a new phase was preceded by nucleation phenomena, which were particularly easy to monitor at solid Hg electrodes. The nucleation kinetics were studied using the chronoamperometric method. At very low temperatures, when the mobility of mercury atoms was restricted, the electrosorption of alkali metal ions on solid mercury electrodes was noted. Subsequent study allowed determination of the electrosorption parameters. The free energy of electrosorption is discussed in terms of interactions between alkali metals and mercury. The effect of crown ethers on the kinetics of alkali metal ion reduction was studied at both standard size and ultramicro-mercury electrodes in nonaqueous solutions using ultrafast cyclic voltammetry and ac voltammetry. The usefulness of ultrafast cyclic voltammetry with ultramicroelectrodes in measurements of the kinetics of amalgam formation was verified in a brief study of cadmium ion reduction. The mechanism of the complex reduction at mercury was analyzed based on the free energy changes before and after the activation state. In addition, the stoichiometry and formation constants of the crown ether/alkali metal complexes were determined using cyclic voltammetry. The mechanism of electroreduction of ammonium ions at mercury electrodes in non-aqueous media was analyzed.

Penetration of amalgam constituents into dentine

NARCIS (Netherlands)

Scholtanus, Johannes D.; Ozcan, Mutlu; Huysmans, Marie-Charlotte D. N. J. M.

Objectives: Amalgam restorations are replaced by adhesively placed composite resin restorations at an increasing rate. After the removal of amalgam dentine often shows marked dark discoloration that is attributed to the penetration of corrosion products from overlying amalgams. it is questioned

Penetration of amalgam constituents into dentine.

NARCIS (Netherlands)

Scholtanus, J.D.; Ozcan, M.; Huysmans, M.C.D.N.J.M.

2009-01-01

OBJECTIVES: Amalgam restorations are replaced by adhesively placed composite resin restorations at an increasing rate. After the removal of amalgam dentine often shows marked dark discoloration that is attributed to the penetration of corrosion products from overlying amalgams. It is questioned

The differences in Hg content released from high copper amalgam and silverfil argentum restoration into artificial saliva after one week of soaking (in vitro

Directory of Open Access Journals (Sweden)

Deriz Rieskanoerbachra Wisuardy

2008-07-01

Full Text Available Dental restoration is a treatment in dentistry that very often implemented. One of the restoration materials used is an amalgam. Amalgam has some deficiencies, among others, the presence of free Hg. The purpose of this study was to find out the difference in Hg content released from two different kinds of amalgam, namely, high copper amalgam and silverfil argentum carried out in vitro. This study was carried out on thirty premolar teeth of the maxilla which underwent class one occlusal restoration. The Hg content released was measured using the Atomic Absorption Spectrophotometry (AAS. This was a quasi-experimental study. The study results analyzed using the independent t paired statistical test method indicated that after one week of immersion, the average Hg content released from high copper amalgam restoration was 10,695 ng/mL and from silverfil argentum restoration was 5,602 ng/mL. The conclusion of the study was that there was a difference in Hg content released from high copper amalgam restoration and silverfil argentum restoration. The Hg content released from high copper amalgam restoration was higher than the Hg content released from silverfil argentum restoration.

Extensive amalgam tattoo on the alveolar-gingival mucosa.

Science.gov (United States)

Galletta, Vivian C; Artico, Gabriela; Dal Vechio, Aluana M C; Lemos, Celso A; Migliari, Dante A

2011-01-01

Amalgam tattoos are common exogenous pigmented lesions of the oral mucosa occurring mainly by inadvertent placement of amalgam particles into soft tissues. The diagnosis of amalgam tattoo is simple, usually based on clinical findings associated with presence or history of amalgam fillings removal. Intraoral X-rays may be helpful in detecting amalgam-related radiopacity. In cases where amalgam tattoo cannot be differentiated from other causes of oral pigmentation, a biopsy should be performed. This article deals with an extensive amalgam tattoo lesion which required a biopsy for a definitive diagnosis.

Mercury pollution in the Upper Beni River, Amazonian basin : Bolivia

OpenAIRE

Maurice Bourgoin, Laurence; Quiroga, I.; Guyot, Jean-Loup; Malm, O.

1999-01-01

Mercury contamination caused by the amalgamation of gold in small-scale gold mining is an environmental problem of increasing concern, particularly in tropical regions like the Amazon, where a new boom of such gold mining started in the 1970s. In Brazil, research into these problems has been carried out for many years, but there is no available data for Bolivia. The present paper surveys mercury contamination of a Bolivian river system in the Amazon drainage basin, measured in water, fish, an...

Mercury recycling in the United States in 2000

Science.gov (United States)

Brooks, William E.; Matos, Grecia R.

2005-01-01

Reclamation and recycling of mercury from used mercury- containing products and treatment of byproduct mercury from gold mining is vital to the continued, though declining, use of this metal. Mercury is reclaimed from mercury-containing waste by treatment in multistep high-temperature retorts-the mercury is volatized and then condensed for purification and sale. Some mercury-containing waste, however, may be landfilled, and landfilled material represents loss of a recyclable resource and a threat to the environment. Related issues include mercury disposal and waste management, toxicity and human health, and regulation of mercury releases in the environment. End-users of mercury-containing products may face fines and prosecution if these products are improperly recycled or not recycled. Local and State environmental regulations require adherence to the Resource Conservation and Recovery Act and the Comprehensive Environmental Response, Compensation, and Liability Act to regulate generation, treatment, and disposal of mercury-containing products. In the United States, several large companies and a number of smaller companies collect these products from a variety of sources and then reclaim and recycle the mercury. Because mercury has not been mined as a principal product in the United States since 1992, mercury reclamation from fabricated products has become the main source of mercury. Principal product mercury and byproduct mercury from mining operations are considered to be primary materials. Mercury may also be obtained as a byproduct from domestic or foreign gold-processing operations. In the early 1990s, U.S. manufacturers used an annual average that ranged from 500 to 600 metric tons of recycled and imported mercury for fabrication of automobile convenience switches, dental amalgam, fluorescent lamps, medical uses and thermometers, and thermostats. The amount now used for fabrication is estimated to be 200 metric tons per year or less. Much of the data on

Backscattering from dental restorations and splint materials during therapeutic radiation

International Nuclear Information System (INIS)

Farman, A.G.; Sharma, S.; George, D.I.; Wilson, D.; Dodd, D.; Figa, R.; Haskell, B.

1985-01-01

Models were constructed to simulate as closely as possible the human oral cavity. Radiation absorbed doses were determined for controls and various test situations involving the presence of dental restorative and splint materials during cobalt-60 irradiation of the models. Adjacent gold full crowns and adjacent solid dental silver amalgam cores both increased the dose to the interproximal gingivae by 20%. Use of orthodontic full bands for splinting the jaws increased the dose to the buccal tissues by an average of 10%. Augmentation of dose through backscatter radiation was determined to be only slight for intracoronal amalgam fillings and stainless steel or plastic bracket splints

Dental restorative materials from a work environmental perspective

OpenAIRE

Lönnroth, Emma-Christin

1999-01-01

The main occupational health hazard for dental personnel is muscle-skeletal problem, followed by symptoms caused by exposure to chemicals. Clinical dental work includes exposure to a number of products like soap, detergents, disinfectants, amalgam, mono- and oligomers, catalysts, inhibitors, solvents and adhesives. Some are chemically very active. The aims of this thesis have been to survey the occurrence of symptoms from skin, eyes and respiratory tract among dental personnel working in gene...

Methods to reduce mercury pollution in small gold mining operations

OpenAIRE

Pantoja-Timarán, F.; Álvarez-Rodríguez, R.; Rodríguez-Avelló, A. S.

2005-01-01

The use of mercury for gold beneficiation is still a current practice in small mining operations, mainly in underdeveloped countries, due to the low investment required and necessity of easy to operate systems. But the lack of basic protections makes unavoidable the high pollution of water streams, soils, and in fact, human bodies. Some improvements have been done at site like that related to the removal of the mercury from the amalgam, that usually was done in the open air and now have been ...

Avaliação da infiltração marginal de restaurações de amálgama: mercúrio versus gálio Evaluation of marginal leakage of amalgam restorations: mercury versus gallium

Directory of Open Access Journals (Sweden)

Elizangela Soares FIALHO

2000-03-01

Full Text Available As restaurações de amálgama sofrem hoje uma série de questionamentos em relação a presença de mercúrio na sua composição e ligas alternativas foram desenvolvidas para a substituição desse material. Neste estudo avaliamos a infiltração marginal de duas ligas de amálgama (com mercúrio e com gálio conjuntamente com dois sistemas adesivos (PAAMA e Scotchbond Multi-Uso Plus em cavidades de classe V (margens em esmalte e cemento. Foram utilizados dentes humanos que após serem restaurados foram termociclados (500 ciclos, 5ºC-55ºC, 15 s em cada banho e inseridos em corante (azul de metileno e então desgastados e avaliados. Os escores foram compilados e submetidos a análise estatística (teste de Kruskal-Wallis com significância de 1%. Baseados nos resultados encontrados, pode-se concluir que houve diferença significante entre os adesivos utilizados, sendo melhor o sistema Scotchbond Multi-Uso Plus, não havendo diferença estatística entre as ligas de amálgama e nem entre as paredes.Nowadays, there is an increasing concern about the presence of mercury in amalgam restorations, and alternative alloys were developed as substitutes for this material. In this study, the marginal leakage of two amalgam alloys (with mercury and with gallium with two adhesive systems (PAAMA and Scotchbond Multipurpose Plus were evaluated in class V cavities (margins in enamel and cement. Sound human teeth were restored and submitted to 500 cicles (5ºC-55ºC, 15 s in each wash before immersion in dye ( methylene blue. The teeth were cut and evaluated. The scores were compiled and submitted to statistical analysis (Kruskal-Wallis test with 99% of confidence level. Based on the results, we can conclude that there was a significant difference between the utilized adhesives, and that the best performance was obtained by the Scotchbond Multipurpose Plus system. There was no statistical difference between the amalgam alloys nor between the tooth walls.

BI-AMALGAMATION OF SMALL WEAK GLOBAL DIMENSION

OpenAIRE

Tamekkante, Mohammed; Bouba, El Mehdi

2017-01-01

In this paper, we characterize the bi-Amalgamations of small weakglobal dimension. The new results compare to previous works carried on varioussettings of duplications and amalgamations, and capitalize on recent resultson bi-amalgamations

Bi-amalgamations subject to the arithmetical property

OpenAIRE

Kabbaj, S.; Mahdou, N.; Moutui, M. A. S.

2016-01-01

This paper establishes necessary and sufficient conditions for a bi-amalgamation to inherit the arithmetical property, with applications on the weak global dimension and transfer of the semihereditary property. The new results compare to previous works carried on various settings of duplications and amalgamations, and capitalize on recent results on bi-amalgamations. All results are backed with new and illustrative examples arising as bi-amalgamations.

Geo-Spatial Characterization of Soil Mercury and Arsenic at a High-Altitude Bolivian Gold Mine.

Science.gov (United States)

Johnson, Glen D; Pavilonis, Brian; Caravanos, Jack; Grassman, Jean

2018-02-01

Soil mercury concentrations at a typical small-scale mine site in the Bolivian Andes were elevated (28-737 mg/kg or ppm) in localized areas where mercury amalgams were either formed or vaporized to release gold, but was not detectable beyond approximately 10 m from its sources. Arsenic was measurable, exceeding known background levels throughout the mine site (77-137,022 ppm), and was also measurable through the local village of Ingenio (36-1803 ppm). Although arsenic levels were high at all surveyed locations, its spatial pattern followed mercury, being highest where mercury was high.

Methyl mercury exposure in Swedish women with high fish consumption

International Nuclear Information System (INIS)

Bjoernberg, Karolin Ask; Vahter, Marie; Grawe, Kierstin Petersson; Berglund, Marika

2005-01-01

We studied the exposure to methyl mercury (MeHg) in 127 Swedish women of childbearing age with high consumption of various types of fish, using total mercury (T-Hg) in hair and MeHg in blood as biomarkers. Fish consumption was assessed using a food frequency questionnaire (FFQ), including detailed information about consumption of different fish species, reflecting average intake during 1 year. We also determined inorganic mercury (I-Hg) in blood, and selenium (Se) in serum. The average total fish consumption, as reported in the food frequency questionnaire, was approximately 4 times/week (range 1.6-19 times/week). Fish species potentially high in MeHg, included in the Swedish dietary advisories, was consumed by 79% of the women. About 10% consumed such species more than once a week, i.e., more than what is recommended. Other fish species potentially high in MeHg, not included in the Swedish dietary advisories, was consumed by 54% of the women. Eleven percent never consumed fish species potentially high in MeHg. T-Hg in hair (median 0.70 mg/kg; range 0.08-6.6 mg/kg) was associated with MeHg in blood (median 1.7 μg/L; range 0.30-14 μg/L; r s =0.78; p s =0.32; p s =0.37; p s =0.35; p=0.002, respectively). I-Hg in blood (median 0.24 μg/L; range 0.01-1.6 μg/L) increased with increasing number of dental amalgam fillings. We found no statistical significant associations between the various mercury species measured and the Se concentration in serum. Hair mercury levels exceeded the levels corresponding to the EPA reference dose (RfD) of 0.1 μg MeHg/kg b.w. per day in 20% of the women. Thus, there seems to be no margin of safety for neurodevelopmental effects in fetus, for women with high fish consumption unless they decrease their intake of certain fish species

Amalgams and χ-Boundedness

DEFF Research Database (Denmark)

Penev, Irena

2017-01-01

, clique-cutsets, and amalgams together preserve χ-boundedness. More precisely, we show that if G and G∗ are hereditary classes of graphs such that G is χ-bounded, and such that every graph in G∗ either belongs to G or admits a proper homogeneous set, a clique-cutset, or an amalgam, then the class G∗ is χ...

Kazakhstan In situ BioTransformation of Mercury ...

Science.gov (United States)

Our final international work on the biological decontamination of the mercury contamination of soils in the Northern outskirts of Pavlodar as a result of activity at the former PO “Khimprom” chemical plant is reported here. The plant produced chlorine and alkali from the 1970s into the 1990s using the electrolytic amalgam method entailing the use of massive amounts of mercury. Ground water became contaminated with Hg resulting in a plume 470 m wide, 1.9 km long, estimated to contain 2 million cubic meters of water. This plume could reach the River Irtysh, a source of drinking water for large cities in Kazakhstan and Russia. Significant amounts of mercuric compounds are deposited in the sediments of Lake Balkyldak, 1.5 km north of the factory. This lake occasionally received wastewater from the factory. Phase I of the PO “Kimprom” clean-up that isolated the major sources of mercury at the site was completed in 2004. However, significant amounts of mercury remain underground including groundwater contaminated with Hg in the form of HgCl2 with little to no elemental or methyl mercury (MeHg). Develop biotechnology strategies to mitigate mercury contamination in groundwater

Mercury health effects among the workers extracting gold from carpets and dusted clays through amalgamation and roasting processes.

Science.gov (United States)

Gul, Nayab; Khan, Sardar; Khan, Abbas; Ahmad, Sheikh Saeed

2015-11-01

Mercury (Hg) is a highly toxic metal which can cause serious health effects. The aim of this research was to determine the concentrations of total Hg (T-Hg), methyl Hg (Me-Hg), and inorganic Hg (I-Hg) in the biological samples (plasma, red blood cells (RBCs), urine, hair, and nails) of the exposed goldsmith workers. This is the first study that determines the detailed Hg concentrations in the biological samples (plasma, RBCs, urine, hair, and nails) of the exposed goldsmith workers and correlates them with the diseases noted among the workers in a single paper. Biological samples were collected from goldsmith workers (n = 40) and analyzed for T-Hg, Me-Hg, and I-Hg using atomic absorption spectrometer equipped with mercury hydride system. The mean T-Hg concentration in RBCs (33 μg L(-1)), plasma (11.8 μg L(-1)), urine (167 μg L(-1)), hair (4.21 μg g(-1)), and nails (5.91 μg g(-1)) were higher than the control RBCs (1.64 μg L(-1)), plasma (0.55 μg L(-1)), urine (2.72 μg L(-1)), hair (0.35 μg g(-1)), and nails (0.51 μg g(-1)). All workers participated in this study were suffering from physical and mental diseases. The concentration of Hg was found higher among the workers suffering from mental diseases as compared to those suffering from physical diseases. Among the physical diseases, the most serious diseases were sexual dysfunction, skin diseases, and fatigue because the workers suffering from these diseases had higher concentration of Hg than the workers with other diseases. The occurrence of physical diseases (88%) was greater than the mental diseases (53%) among the workers. The correlations of physical and mental diseases with experience (years of work) and exposure time were significant (p  0.05) correlation was observed between demographic parameters and Hg concentrations in the biological samples of the workers. The burning process of amalgamated gold is a significant source of Hg exposure to goldsmith workers; therefore, awareness and

Trace mercury determination in drinking and natural water after preconcentration and separation by DLLME-SFO method coupled with cold vapor atomic absorption spectrometry

OpenAIRE

Abdollahi Atousa; Amirkavehei Mooud; Gheisari Mohammad Mehdi; Tadayon Fariba

2014-01-01

A novel dispersive liquid–liquid microextraction based on solidification of floating organic drop (DLLME-SFO) for simultaneous separation/preconcentration of ultra trace amounts of mercury was used. A method based on amalgamation was used for collection of gaseous mercury on gold coated sand (Gold trap). The concentration of mercury was determined by cold vapor atomic absorption spectrometry (CV-AAS). The DLLME-SFO behavior of mercury by using dithizone as complexing agent was systematically ...

The activation of aluminium by mercury ions in non-aggressive media

Energy Technology Data Exchange (ETDEWEB)

Bessone, J.B. [INIEC-Dto de Ingenieria Quimica, Universidad Nacional del Sur, Av. Alem 1253, 8000 Bahia Blanca (Argentina)]. E-mail: jbessone@criba.edu.ar

2006-12-15

The presence of Hg at concentration less than 300 ppm in Al base alloys causes their passivation breakdown. On alloys used as sacrificial anodes, it causes a major lowering (>0.3 V) in their operational potential in chloride media. Mercury as trace constituent in the natural gas stream causes severe damage to cryogenic heat exchangers. The present paper presents evidences of the mechanism by which mercury produces its pronounced effect in aqueous non-aggressive media. The work was carried out using pure (99.99%) aluminium and mercury (II) acetate solutions of different concentrations and pH. Open circuit potential-time responses were obtained. The surface effects were followed by means of scanning microscopy and EDAX/X-Ray analysis. The results demonstrate that immediately after immersion, the initial air-formed oxide film underwent a dynamic crack-healing process at flaws in the film, possible associated to grain boundaries. The subsequent healing process, if any, depends on the media composition. Thus, in this special case, Hg{sup 2+} ions can be directly reduced on the bare aluminium, reaching a true metallic contact, and initiating surface diffusion. This enables the formation of an amalgam. Aluminium atoms diffuse through the liquid mercury and undergo oxidation at the amalgam/electrolyte interface. This process is responsible for the oxide detachment (by undermining) and the attack morphology (i.e., wide cavities). The presence of aggressive anions is not needed to initiate activation.

Assessment of manual restorative treatment (MRT) with amalgam in high-caries Filipino children: results after 2 years.

Science.gov (United States)

Monse-Schneider, B; Heinrich-Weltzien, R; Schug, D; Sheiham, A; Borutta, A

2003-04-01

The atraumatic restorative treatment (ART), using only hand instruments and glass-ionomer cement as adhesive material is recommended for restorative dental treatment in disadvantaged communities lacking electricity and sophisticated dental equipment. Research is required on more durable restorative materials appropriate for populations with high-caries experience. The aim of the study was to evaluate, under field conditions, the applicability and effectiveness of an encapsulated amalgam as restorative material in ART prepared cavities in permanent teeth of children with high-caries rates. As the definition of ART restricts the manual treatment to adhesive materials the approach used is called the manual restorative treatment (MRT). Two dentists and two trained healthcare workers, using hand instruments and an encapsulated amalgam that was mixed with a manually driven triturator, placed a total of 934 restorations in the permanent dentition in 466 children. Due to irregular school attendance of Filipino children only 611 restorations could be evaluated by one independent dentist. The average age at reassessment of restorations was 27 +/- 4.5 months. 93.3% of the restorations were acceptable. The failure rate of occlusal surface restorations was 5.6% compared with 13.6% of buccal surface fillings. The survival rate of large occlusal restorations was 95.1% compared with 93.7% for small restorations. The survival of MRT restorations was not influenced by the experience and professional level of the operator. Amalgam is a suitable MRT material, especially for extensive occlusal lesions in high-caries populations. Studies of longer duration are needed to confirm this finding.

Amalgam-chromatographic separation of magnesium isotopes

International Nuclear Information System (INIS)

Klinskij, G.D.; Levkin, A.V.; Ivanov, S.A.

1990-01-01

Separation of magnesium isotopes within Mg(Hg)-MgI 2 system (in dimethylformamide) is conducted under amalgam-chromatographic conditions. Separation maximal degree, that is (1.09), for 24 Mg and 26 Mg and separation coefficient (α = 1.0089±0.006) are determined. Light isotopes are found to concentrate in the amalgam. Technique of thermal conversion of flows within amalgam-dimethylformamide system is suggested on the basis of reversible reaction of Ca-Mg element exchange

Alteração dimensional de amálgama de prata e liga à base de gálio Dimensional alteration of silver amalgam and gallium-based alloy

Directory of Open Access Journals (Sweden)

Rafael Yagüe BALLESTER

2001-12-01

Full Text Available As ligas de gálio surgiram como alternativa à problemática da toxicidade do mercúrio. Apresentam propriedades semelhantes às do amálgama, mas as pesquisas apontam duas características desfavoráveis: corrosão excessiva e grande magnitude de expansão de presa, podendo causar fraturas e rachaduras nas estruturas dentais. O objetivo foi avaliar in vitro a alteração dimensional durante 7 dias de uma liga de gálio (Galloy, SDI, Austrália, comparativamente com uma liga de amálgama contendo zinco (F-400, SDI, Austrália, em função do contato e/ou contaminação com solução salina (NaCl 0,9% nos estágios iniciais da cristalização. As condições experimentais de armazenagem foram em: ambiente seco; armazenagem em solução salina e contaminação com solução salina durante a condensação. Para o amálgama, foi ainda estudada a condição de contaminação introduzida na cápsula durante a trituração e para a liga de gálio, a proteção com resina fluida durante as primeiras 24 h ou durante todo o experimento. Os corpos-de-prova foram mantidos à temperatura de 37ºC ± 1ºC e suas dimensões monitoradas a cada 24 h, durante sete dias. O contato da liga de gálio com a solução salina durante a condensação ou nas primeiras horas após a condensação desencadeou uma expansão significantemente maior que as outras condições experimentais ao fim dos 7 dias. A aplicação de uma resina fluida para proteger a superfície dos cilindros foi capaz de evitar o aumento da expansão provocado pela umidade superficial. O amálgama não apresentou alterações significantes em nenhuma das condições experimentais, exceto quando contaminado durante a trituração.Gallium-based dental alloys were created with the aim of solving the problem of toxicity of mercury. The material shows mechanical properties similar to those of dental amalgam, but researches point out two unfavorable characteristics: great corrosion and excessive post

Voltametric Determination of Adenine, Guanine and DNA Using Liquid Mercury Free Polished Silver Solid Amalgam Electrode

Czech Academy of Sciences Publication Activity Database

Fadrná, Renata; Josypčuk, Bohdan; Fojta, Miroslav; Navrátil, Tomáš; Novotný, Ladislav

2004-01-01

Roč. 37, č. 3 (2004), s. 399-413 ISSN 0003-2719 R&D Projects: GA AV ČR KSK4040110 Grant - others:GIT(AR) 101/02/U111/CZ Keywords : voltammetry * DNA * polished silver solid amalgam electrode Subject RIV: CG - Electrochemistry Impact factor: 1.165, year: 2004

Mixed Waste Focus Area Working Group: An Integrated Approach to Mercury Waste Treatment and Disposal. Revision 1

International Nuclear Information System (INIS)

Morris, M.I.; Conley, T.B.; Osborne-Lee, I.W.

1997-01-01

May 1996, the U.S. Department of Energy (DOE) Mixed Waste Focus Area (MWFA) initiated the Mercury Work Group (HgWG). The HgWG was established to address and resolve the issues associated with Mercury- contaminated mixed wastes (MWs). During the initial technical baseline development process of the MWFA, three of the top four technology deficiencies identified were related to (1) amalgamation, (2) stabilization, and (3) separation and removal for the treatment of mercury and mercury-contaminated mixed waste (MW). The HgWG is assisting the MWFA in soliciting, identifying, initiating, and managing efforts to address these needs

Success of Dental Treatments under Behavior Management, Sedation and General Anesthesia.

Science.gov (United States)

Blumer, Sigalit; Costa, Liora; Peretz, Benjamin

To present comparative study aims to assist the practitioner to choose between behavior modification (BM) techniques, pharmacologic sedation (N 2 O-O 2 alone or combined with midazolam 0.5 mg/ kg) or routine general anesthesia (GA) for the most successful approach in enabling pediatric dental care. Dental records of 56 children treated in a university dental clinic between 2006-2016 were reviewed, and data on age, gender, required treatment (amalgam restorations, composite restorations, pulpotomy, and stainless steel crowns [SSC]), treatment approaches and therapeutic success at final follow-up were retrieved. Treatment under GA had the best success rates compared to both BM and pharmacologic sedation. N 2 O-O 2 alone had a 6.1-fold greater risk of failure compared to N 2 O-O 2 +midazolam (p- <0.008). Amalgam restorations had a 2.61-fold greater risk of failure than SSC (p- <0.008). The GA mode yielded significantly greater success than the N 2 O-O 2 mode alone. There were no significant differences in success rates between GA and combined midazolam 0.5 mg/kg+N 2 O-O 2 . When choosing restoration material, it is important to remember the high success rate of SSC compared to amalgam restoration.

Demonstration of New Technologies Required for the Treatment of Mixed Waste Contaminated with {ge}260 ppm Mercury

Energy Technology Data Exchange (ETDEWEB)

Morris, M.I.

2002-02-06

The Resource Conservation and Recovery Act (RCRA) defines several categories of mercury wastes, each of which has a defined technology or concentration-based treatment standard, or universal treatment standard (UTS). RCRA defines mercury hazardous wastes as any waste that has a TCLP value for mercury of 0.2 mg/L or greater. Three of these categories, all nonwastewaters, fall within the scope of this report on new technologies to treat mercury-contaminated wastes: wastes as elemental mercury; hazardous wastes with less than 260 mg/kg [parts per million (ppm)] mercury; and hazardous wastes with 260 ppm or more of mercury. While this report deals specifically with the last category--hazardous wastes with 260 ppm or more of mercury--the other two categories will be discussed briefly so that the full range of mercury treatment challenges can be understood. The treatment methods for these three categories are as follows: Waste as elemental mercury--RCRA identifies amalgamation (AMLGM) as the treatment standard for radioactive elemental mercury. However, radioactive mercury condensates from retorting (RMERC) processes also require amalgamation. In addition, incineration (IMERC) and RMERC processes that produce residues with >260 ppm of radioactive mercury contamination and that fail the RCRA toxicity characteristic leaching procedure (TCLP) limit for mercury (0.20 mg/L) require RMERC, followed by AMLGM of the condensate. Waste with <260 ppm mercury--No specific treatment method is specified for hazardous wastes containing <260 ppm. However, RCRA regulations require that such wastes (other than RMERC residues) that exceed a TCLP mercury concentration of 0.20 mg/L be treated by a suitable method to meet the TCLP limit for mercury of 0.025 mg/L. RMERC residues must meet the TCLP value of {ge}0.20 mg/L, or be stabilized and meet the {ge}0.025 mg/L limit. Waste with {ge}260 ppm mercury--For hazardous wastes with mercury contaminant concentrations {ge}260 ppm and RCRA

Regenerable sorbents for mercury capture in simulated coal combustion flue gas.

Science.gov (United States)

Rodríguez-Pérez, Jorge; López-Antón, M Antonia; Díaz-Somoano, Mercedes; García, Roberto; Martínez-Tarazona, M Rosa

2013-09-15

This work demonstrates that regenerable sorbents containing nano-particles of gold dispersed on an activated carbon are efficient and long-life materials for capturing mercury species from coal combustion flue gases. These sorbents can be used in such a way that the high investment entailed in their preparation will be compensated for by the recovery of all valuable materials. The characteristics of the support and dispersion of gold in the carbon surface influence the efficiency and lifetime of the sorbents. The main factor that determines the retention of mercury and the regeneration of the sorbent is the presence of reactive gases that enhance mercury retention capacity. The capture of mercury is a consequence of two mechanisms: (i) the retention of elemental mercury by amalgamation with gold and (ii) the retention of oxidized mercury on the activated carbon support. These sorbents were specifically designed for retaining the mercury remaining in gas phase after the desulfurization units in coal power plants. Copyright © 2013 Elsevier B.V. All rights reserved.

Comprehension of amalgamation for future digital society

International Nuclear Information System (INIS)

Lee, Byeong Uk

2010-08-01

This book deals with understanding of amalgamation for future digital society, which describes outline of amalgamation, ubiquitous environment, cognitive science I such as psychology and neurology, cognitive science II like philosophy, linguistics and anthropology, an automatic machine, evolution theory and amalgamation, brain science and consciousness, mind and software and creativity and art. Each chapter has introduction, composition, related science, function and models.

Comprehension of amalgamation for future digital society

Energy Technology Data Exchange (ETDEWEB)

Lee, Byeong Uk

2010-08-15

This book deals with understanding of amalgamation for future digital society, which describes outline of amalgamation, ubiquitous environment, cognitive science I such as psychology and neurology, cognitive science II like philosophy, linguistics and anthropology, an automatic machine, evolution theory and amalgamation, brain science and consciousness, mind and software and creativity and art. Each chapter has introduction, composition, related science, function and models.

Class II glass ionomer cermet tunnel, resin sandwich and amalgam restorations over 2 years.

Science.gov (United States)

Wilkie, R; Lidums, A; Smales, R

1993-08-01

This study compared the clinical behavior of a glass ionomer (polyalkenoate) silver cermet, a posterior resin composite used with the "tunnel" technique, a posterior resin composite used with the "closed sandwich" technique, and a high-copper amalgam for restoring small, proximal surface carious lesions. Two dentists placed 86 restorations in the posterior permanent teeth of 26 adults treated at a dental hospital. Restorations were assessed at 6-month intervals over 2 years for gingivitis adjacent to them, the tightness of proximal contacts, occlusal wear, surface voids, roughness and cracking, surface and marginal staining, and marginal fracture. Small filling defects, surface voids and occlusal wear were obvious with the cermet material, with surface crazing and cracking present in 48% of the tunnel restorations. Two of the posterior resin composites, but none of the amalgam restorations, also failed. The cermet cannot be recommended as a long-term permanent restorative material in situations where it is likely to be subjected to heavy occlusal stresses and abrasive wear.

Determination of Mercury in an Assortment of Dietary Supplements Using an Inexpensive Combustion Atomic Absorption Spectrometry Technique

OpenAIRE

Levine, Keith E.; Levine, Michael A.; Weber, Frank X.; Hu, Ye; Perlmutter, Jason; Grohse, Peter M.

2005-01-01

The concentrations of mercury in forty, commercially available dietary supplements, were determined using a new, inexpensive analysis technique. The method involves thermal decomposition, amalgamation, and detection of mercury by atomic absorption spectrometry with an analysis time of approximately six minutes per sample. The primary cost savings from this approach is that labor-intensive sample digestion is not required prior to analysis, further automating the analytical procedure. As a res...

Mercury Hair Concentration among Primary School Children in Malaysia

Directory of Open Access Journals (Sweden)

Nurul Izzah Abdul Samad

2017-12-01

Full Text Available The main concern regarding mercury exposure is the adverse health effect on the developing nervous system. The objective of this cross-sectional study was to determine hair mercury levels and their association with socio-demographic characteristics, complaints about mercury poisoning symptoms and the fish consumption pattern among children in Malaysia. A cross-sectional study was conducted among 215 school children aged 11 years old. Hair was collected from the children and the total mercury was analyzed using oxygen combustion–gold amalgamation atomic absorption spectrophotometry. Anthropometric data, a fish consumption questionnaire and mercury poisoning symptoms were collected during a personal interview. The mean hair mercury level among primary school children was 0.63 ± 0.59 µg/g with the geometric mean of 0.47 µg/g. A total of 14% of respondents had hair mercury levels above 1 µg/g. A multiple binary logistic regression analysis outlined that fish consumption of at least one meal per week increased the likelihood of having a high mercury level (odds ratio (OR 3.7, 95% confidence interval (CI 1.3–10.4. This study confirms the existence of a mercury burden among Malaysian children and the level is high compared to other regional studies. This study provides important baseline data regarding the mercury level among children in Malaysia.

21 CFR 872.3080 - Mercury and alloy dispenser.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mercury and alloy dispenser. 872.3080 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3080 Mercury and alloy dispenser. (a) Identification. A mercury and alloy dispenser is a device with a spring-activated valve intended to measure and...

Solid-phase partitioning of mercury in artisanal gold mine tailings from selected key areas in Mindanao, Philippines, and its implications for mercury detoxification.

Science.gov (United States)

Opiso, Einstine M; Aseneiro, John Paul J; Banda, Marybeth Hope T; Tabelin, Carlito B

2018-03-01

The solid-phase partitioning of mercury could provide necessary data in the identification of remediation techniques in contaminated artisanal gold mine tailings. This study was conducted to determine the total mercury content of mine wastes and identify its solid-phase partitioning through selective sequential extraction coupled with cold vapour atomic absorption spectroscopy. Samples from mine tailings and the carbon-in-pulp (CIP) process were obtained from selected key areas in Mindanao, Philippines. The results showed that mercury use is still prevalent among small-scale gold miners in the Philippines. Tailings after ball mill-gravity concentration (W-BM and Li-BM samples) from Mt Diwata and Libona contained high levels of mercury amounting to 25.024 and 6.5 mg kg -1 , respectively. The most prevalent form of mercury in the mine tailings was elemental/amalgamated mercury, followed by water soluble, exchangeable, organic and strongly bound phases, respectively. In contrast, mercury content of carbon-in-pulp residues were significantly lower at only 0.3 and 0.06 mg kg -1 for P-CIP (Del Pilar) and W-CIP (Mt Diwata), respectively. The bulk of mercury in P-CIP samples was partitioned in residual fraction while in W-CIP samples, water soluble mercury predominated. Overall, this study has several important implications with regards to mercury detoxification of contaminated mine tailings from Mindanao, Philippines.

Study of the sorption of Tin on human Teeth using the radioactive Tracer Technique

International Nuclear Information System (INIS)

Alian, G.; Helal, A.

1997-01-01

Dental amalgam is prepared from an amalgam alloy and mercury. For a low-copper amalgam alloy the reaction, thereby involved, is as follows (1). Ag 3 Sn(gamma) + Hg(I) → Ag 2 Hg 3 (gamma 1) + Sn 7.8 Hg (Gamma 2) + Ag 3 Sn(gamma) Unreacted excess for an admixed high-copper alloy the amalgamation reaction can be presented as follows Ag 3 Sn(gamma) + Ag-Cu (eutectic) + Hg(I) → Ag 2 Hg 3(gamma 1) + Sn-7.8 Hg (gamma 2) + Ag 3 Sn(gamma) unreacted + Ag-Cu (eutectic) unreacted and later Sn 7.8 Hg(gamma 2) + Ag-Cu (eutectic) → Cu 6 Sn 5 (eta) + Ag 2 Hg 3 (gamma 1) The destructive attack of the amalgam in the oral environment through chemical or electrochemical reaction (corrosion) gives rise to various ionic species of the amalgam components. The various phases of an amalgam have different corrosion potentials because of their different chemical compositions. Thus electrochemical measurements on pure phases have shown that the Ag 2 Hg 3 phase (gamma) has highest corrosion resistance, followed by the Ag 3 Sn, Ag 3 Cu 2 , Cu 3 Sn, Cu 6 Sn 5 and the Sn 708 Hg phase (Gamma 2 ). However, this behaviour for the pure phases is changed to some extent in the dental amalgam. Usually neither the gamma nor the gamma 1 phase is corroded as easily as the gamma 2 phase

Mercury in Hair Is Inversely Related to Disease Associated Damage in Systemic Lupus Erythematosus

Directory of Open Access Journals (Sweden)

William Crowe

2015-12-01

Full Text Available Systemic lupus erythematosus (SLE is an autoimmune inflammatory disease, and environmental factors are proposed to exacerbate existing symptoms. One such environmental factor is mercury. The aim of this study was to investigate the relationship between exposure to mercury (Hg and disease activity and disease associated damage in Total Hg concentrations in hair and urine were measured in 52 SLE patients. Dental amalgams were quantified. Disease activity was assessed using three indexes including the British Isles Lupus Assessment Group Index (BILAG. Disease associated damage was measured using the Systemic Lupus International Collaborating Clinics/American College of Rheumatology SLICC/ACR Damage Index. Pearson’s correlation identified a significant negative correlation between hair Hg and BILAG (r = −0.323, p = 0.029 and SLICC/ACR (r = −0.377, p = 0.038. Multiple regression analysis identified hair Hg as a significant predictor of disease associated damage as determined by SLICC/ACR (β = −0.366, 95% confidence interval (CI: −1.769, −0.155 p = 0.019. Urinary Hg was not related to disease activity or damage. Fish consumption is the primary route of MeHg exposure in humans and the inverse association of hair Hg with disease activity observed here might be explained by the anti-inflammatory effects of n-3 long chain polyunsaturated fatty acids also found in fish.

Mercury Exposure and Health Problems in Urban Artisanal Gold Mining (UAGM in Makassar, South Sulawesi, Indonesia

Directory of Open Access Journals (Sweden)

Hasriwiani Habo Abbas

2017-06-01

Full Text Available Urban artisanal gold mining (UAGM in Makassar, South Sulawesi, Indonesia, has been run by a number of urban gold workers with gold jewelry manufacture as its core activity. The wastes generated from goldsmiths’ activities were further processed by the gold smelters to recover fine gold particles. Smelting gold doré, amalgamation, and burning out the amalgam were the mercury-based gold process usually applied in their work. While working the gold workers are, therefore, potentially exposed to a source of mercury pollution that may cause health problems because of working without proper protection. The aims of this research are to characterize the process of urban artisanal gold mining with the potential mercury exposures during the process, and to assess the health of the gold workers. The results showed that the gold workers had a low educational background, but a relatively high income. The total mercury concentration of gold workers was higher than the control group. They were exposed to intoxicatingly high levels of mercury with the average total mercury concentrations of 6.6 and 10.8 µg/g in the hair of indirect and direct exposed workers, respectively. The health assessment showed that 85% of the gold workers suffered neurological symptoms, such as tremors, and 44%–56% of them experienced restricted fields of vision, slow reflexes, sensory disturbances, unbalanced rigidity, and ataxia. The results also showed that the working years have reasonable correlation with the sum of the positive findings in the 10 neurological symptoms.

Catalysis-reduction strategy for sensing inorganic and organic mercury based on gold nanoparticles.

Science.gov (United States)

Li, Xiaokun; Zhang, Youlin; Chang, Yulei; Xue, Bin; Kong, Xianggui; Chen, Wei

2017-06-15

In view of the high biotoxicity and trace concentration of mercury (Hg) in environmental water, developing simple, ultra-sensitive and highly selective method capable of simultaneous determination of various Hg species has attracted wide attention. Here, we present a novel catalysis-reduction strategy for sensing inorganic and organic mercury in aqueous solution through the cooperative effect of AuNP-catalyzed properties and the formation of gold amalgam. For the first time, a new AuNP-catalyzed-organic reaction has been discovered and directly used for sensing Hg 2+ , Hg 2 2+ and CH 3 Hg + according to the change of the amount of the catalytic product induced by the deposition of Hg atoms on the surface of AuNPs. The detection limit of Hg species is 5.0pM (1 ppt), which is 3 orders of magnitude lower than the U.S. Environmental Protection Agency (EPA) limit value of Hg for drinking water (2 ppb). The high selectivity can be exceptionally achieved by the specific formation of gold amalgam. Moreover, the application for detecting tap water samples further demonstrates that this AuNP-based assay can be an excellent method used for sensing mercury at very low content in the environment. Copyright © 2016 Elsevier B.V. All rights reserved.

Mercury-cycling in surface waters and in the atmosphere - species analysis for the investigation of transformation and transport properties of mercury

International Nuclear Information System (INIS)

Ebinghaus, R.; Hintelmann, H.; Wilken, R.D.

1994-01-01

The river Elbe has been one of the most contaminated rivers with regard to mercury for many years. In 1991 a length-profile has been measured for mercury and methylmercury (CH 3 Hg + ) from Obristvi, Czech Republic, to the German bight. Total mercury has been measured by cold vapor atomic absorption spectrometry (CVAAS). The organo mercury compounds have been separated by high performance liquid chromatography (HPLC) connected on-line to an atomic fluorescence spectrometer (AFS) by a continuous flow-system. Total mercury up to 120 mg Hg + /kg and CH 3 Hg + concentrations up to 130 μg CH 3 Hg + /kg could be detected in special sites. The formation of CH 3 Hg + in sediments can be caused besides the methylation of mercury, by sulphate reducing or methanogenic bacteria and transmethylation reactions with organometals. Atmospheric mercury concentrations have been measured at three different European sites. Samples have been collected on gold-coated glass balls or on quartz wool, respectively. After thermal desorption mercury has been determined using the two step amalgamation technique with AFS detection. Compared to natural background concentrations of total gaseous mercury (TGM), slightly increased levels could be detected at a rural site in Germany. This increase can probably be explained by long-range transport processes. Within the vicinity of a inactivated mercury production plant high concentrations of up to 13.5 ng/m 3 particle associated mercury (Hg part ) have been detected. Consequently, dry deposition of mercury in the particulate form can intensify the total deposition flux close to Hg-emitting sources. (orig.)

Determination of mercury concentration in biological materials by neutron activation analysis

International Nuclear Information System (INIS)

Munoz, L.; Gras, N.; Cortes, E.; Cassorla, V.

1983-01-01

The objective of this work was to obtain a confident analytical method for measuring the mercury concentration in biological materials. Destructive neutron activation analysis was used for this purpose and a radiochemical separation method was studied to isolate the mercury from its main interferences: sodium and phosphorus, because these elements in biological materials are in high concentrations. The method developed was based on the copper amalgamation under controlled conditions. Yield and reproductibility studies were performed using 203 Hg as radioactive tracer. Finally, food samples of regular consumption were analyzed and the results were compared with those recommended by FAO/WHO. (Author)

Methyl mercury exposure in Swedish women with high fish consumption

Energy Technology Data Exchange (ETDEWEB)

Bjoernberg, Karolin Ask [Division of Metals and Health, Institute of Environmental Medicine, Karolinska Institutet, Box 210, SE-171 77, Stockholm (Sweden); Vahter, Marie [Division of Metals and Health, Institute of Environmental Medicine, Karolinska Institutet, Box 210, SE-171 77, Stockholm (Sweden); Grawe, Kierstin Petersson [Toxicology Division, National Food Administration, Box 622, SE-751 26 Uppsala (Sweden); Berglund, Marika [Division of Metals and Health, Institute of Environmental Medicine, Karolinska Institutet, Box 210, SE-171 77, Stockholm (Sweden)]. E-mail: Marika.Berglund@imm.ki.se

2005-04-01

We studied the exposure to methyl mercury (MeHg) in 127 Swedish women of childbearing age with high consumption of various types of fish, using total mercury (T-Hg) in hair and MeHg in blood as biomarkers. Fish consumption was assessed using a food frequency questionnaire (FFQ), including detailed information about consumption of different fish species, reflecting average intake during 1 year. We also determined inorganic mercury (I-Hg) in blood, and selenium (Se) in serum. The average total fish consumption, as reported in the food frequency questionnaire, was approximately 4 times/week (range 1.6-19 times/week). Fish species potentially high in MeHg, included in the Swedish dietary advisories, was consumed by 79% of the women. About 10% consumed such species more than once a week, i.e., more than what is recommended. Other fish species potentially high in MeHg, not included in the Swedish dietary advisories, was consumed by 54% of the women. Eleven percent never consumed fish species potentially high in MeHg. T-Hg in hair (median 0.70 mg/kg; range 0.08-6.6 mg/kg) was associated with MeHg in blood (median 1.7 {mu}g/L; range 0.30-14 {mu}g/L; r {sub s}=0.78; p<0.001). Hair T-Hg, blood MeHg and serum Se (median 70 {mu}g/L; range 46-154 {mu}g/L) increased with increasing total fish consumption (r {sub s}=0.32; p<0.001, r {sub s}=0.37; p<0.001 and r {sub s}=0.35; p=0.002, respectively). I-Hg in blood (median 0.24 {mu}g/L; range 0.01-1.6 {mu}g/L) increased with increasing number of dental amalgam fillings. We found no statistical significant associations between the various mercury species measured and the Se concentration in serum. Hair mercury levels exceeded the levels corresponding to the EPA reference dose (RfD) of 0.1 {mu}g MeHg/kg b.w. per day in 20% of the women. Thus, there seems to be no margin of safety for neurodevelopmental effects in fetus, for women with high fish consumption unless they decrease their intake of certain fish species.

Hidden sources of mercury in clinical laboratories.

Science.gov (United States)

Alvarez-Chavez, C R; Federico-Perez, R A; Gomez-Alvarez, A; Velazquez-Contreras, L E; Perez-Rios, R

2014-09-01

The healthcare sector is an important contributor to mercury (Hg) pollution because of the potential presence of mercury in thermometers, blood pressure cuffs, amalgams, etc. There are also other potential sources of mercury in this sector which are used frequently and in high volumes where the presence of the metal is not obvious and which might be collectively contributing to pollution. For instance, some chemicals used for the clinical diagnosis of illness may contain mercury. The goal of this study was to investigate potential sources of mercury pollution, which originate from clinical laboratory discharges, using an exploratory approach. The focus was on the residue generated during automatic analysis of patients' bodily fluids at a medical center in Hermosillo, Sonora, Mexico. This study shows an overview of what might be happening in the region or the country related to non-obvious sources of mercury in the healthcare sector. The results showed measurable levels of mercury in the residues coming from urine sediment analysis. These amounts do not exceed the maximum allowed by Mexican environmental regulations; nevertheless, the frequency and cumulative volume of residues generated, combined with the potential for persistence and the bioaccumulation of mercury in the environment, warrant attention. The work carried out in this study is being taken as a model for future studies for pollution prevention in the healthcare sector with the goal of measuring mercury emissions to the environment from clinical laboratory wastewater, including identifying sources which--while not obvious--could be important given the frequency and volume of their use in the clinical diagnosis.

Improved orthodontic bonding to silver amalgam. Part 2. Lathe-cut, admixed, and spherical amalgams with different intermediate resins.

Science.gov (United States)

Büyükyilmaz, T; Zachrisson, B U

1998-08-01

Flat rectangular tabs (n = 270) prepared from spherical (Tytin), admixed (Dispersalloy) or lathe-cut amalgam (ANA 2000) were subjected to aluminum oxide sandblasting with either 50-mu or 90-mu abrasive powder. Mandibular incisor edgewise brackets were bonded to these tabs. An intermediate resin was used, either All-Bond 2 Primers A + B or a 4-META product--Amalgambond Plus (AP) or Reliance Metal Primer (RMP)--followed by Concise. All specimens were stored in water at 37 degrees C for 24 hours and thermocycled 1000 times from 5 degrees C to 55 degrees C and back before tensile bond strength testing. The bond strength of Concise to etched enamel of extracted, caries-free premolars was used as a control. Bond failure sites were classified using a modified adhesive remnant index (ARI) system. Results were expressed as mean bond strength with SD, and as a function relating the probability of bond failure to stress by means of Weibull analysis. Mean tensile bond strength in the experimental groups ranged from 2.9 to 11.0 MPa--significantly weaker than the control sample (16.0 MPa). Bond failure invariably occurred at the amalgam/adhesive interface. The strongest bonds were created to the spherical and lathe-cut amalgams (range 6.8 to 11.0 MPa). Bonds to the spherical amalgam were probably more reliable. The intermediate application of the 4-META resins AP and RMP generally created significantly stronger bonds to all three basic types of amalgam products than the bonds obtained with the All-Bond 2 primers. The effect of abrasive-particle size on bond strength to different amalgam surfaces was not usually significant (p > 0.05). The implications of these findings are discussed in relationship to clinical experience bonding orthodontic attachments to large amalgam restorations in posterior teeth.

Occupational exposure to mercury. What is a safe level?

OpenAIRE

Moienafshari, R.; Bar-Oz, B.; Koren, G.

1999-01-01

QUESTION: One of my pregnant patients, a dental hygienist, uses mercury in her workplace, but appears to have no symptoms of mercury toxicity. She has heard that mercury might affect her fetus. What should I recommend to her? What is a safe level of mercury in the air for pregnant women? ANSWER: Testing for levels of mercury in whole blood and, preferably, urine is useful for confirming exposure. Currently, mercury vapour concentrations greater than 0.01 mg/m3 are considered unsafe. Also, wom...

Sensitivity improvements, in the determination of mercury in biological tissues by neutron activation analysis

Energy Technology Data Exchange (ETDEWEB)

Cornett, C R; Samudralwar, D L; Ehmann, W D [Kentucky Univ., Lexington, KY (United States). Dept. of Chemistry; Markesbery, W R [Kentucky Univ., Lexington, KY (United States)

1995-08-01

The possible association of dental amalgam surface exposure, brain mercury (Hg) levels, and pathological markers of Alzheimer`s disease (AD) in the brain is the subject of an on-going study in our laboratory. Two radiochemical neutron activation analysis methods and the use of instrumental neutron activation analysis (INAA) with Compton suppression spectrometry have been evaluated for improving our INAA Hg detection limit (2.8{+-}0.6 ng/g, wet-weight basis) in human tissue. Large numbers of samples dictated the use of a purely instrumental method or rapid, simple radiochemical separations. Human brain tissues and NIST biological standards were analyzed using a precipitation of Hg{sub 2}Cl{sub 2}, a solvent extraction utilizing sodium diethyldithiocarbomate, conventional INAA, and INAA with Compton suppression. The radiochemical precipitation of Hg{sub 2}Cl{sub 2} proved to be the most useful method for use in our study because it provided a simultaneous, quantitative determination of silver (Ag) and a Hg detection limit in brain tissue of 1.6{+-}0.1 ng/g (wet-weight basis). (author). 12 refs., 2 tabs.

Analytical Applications of Solid and Paste Amalgam Electrodes

Czech Academy of Sciences Publication Activity Database

Josypčuk, Bohdan; Barek, J.

2009-01-01

Roč. 39, č. 3 (2009), s. 189-203 ISSN 1040-8347 R&D Projects: GA ČR GA203/07/1195; GA AV ČR IAA400400806; GA MŠk(CZ) LC06035 Institutional research plan: CEZ:AV0Z40400503 Keywords : solid amalgam electrodes * voltammetry * paste amalgam electrodes * reference amalgam electrodes Subject RIV: CG - Electrochemistry Impact factor: 2.621, year: 2009

Comparative X-ray studies on the behaviour of amalgam and gold fillings at the margins in the approximal space as a function of time of residence

International Nuclear Information System (INIS)

Hansen, R.

1982-01-01

Within the framework of this thesis, X-ray pictures have been made of 430 gold or amalgam fillings in order to measure the gap between approximal cavity margin and filling margin. With amalgam fillings, the gap width measured after a residence time of half a year was 9.3 μm and widened to 136.9 μm after 8 years, which represents an increase to the 14-fold. The gap widths measured with gold inlays only doubled within this period, increasing from 38.8 μm after half a year to 77.4 μm after 8 years. The number of retention spots found in the approximal-cervical space with amalgam fillings was at least twice that found for gold fillings. From this it is concluded that gold inlays are by far the better solution for dental restorations. (orig./MG) [de

DENTAL MATERIAL BIOCOMPATIBILITY: A CROSS-SECTIONAL STUDY

Directory of Open Access Journals (Sweden)

Carmen SAVIN

2017-06-01

Full Text Available The aim of this study is to assess the knowledge of the students in the Faculty of Dental Medicine of Iasi on the biocompatibility of the dental materials used in current practice. To this end, we elaborated our own questionnaire, including 10 questions to which 92 students from the last 2 years of study answered. The questionnaire cotains assertions on the potential toxic reactions of the most frequently used dental materials. The students answered correctly to the questions related to the biocompatibility of certain dental materials, such as glass-ionomer cement and calcium hydroxide, and they recognized that allergic reactions determined by acrylic resins may occur. We also noticed the lack of knowledge referring to the irreversible modifications produced by the tooth whitening substances on the enamel and dentin, as well as to the side effects produced by dental amalgam.

Cadmium and mercury exposure over time in Swedish children

Energy Technology Data Exchange (ETDEWEB)

Lundh, T., E-mail: Thomas.Lundh@med.lu.se [Division of Occupational and Environmental Medicine, Department of Laboratory Medicine, Lund University, SE−22185 Lund (Sweden); Axmon, A., E-mail: Anna.Axmon@med.lu.se [Division of Occupational and Environmental Medicine, Department of Laboratory Medicine, Lund University, SE−22185 Lund (Sweden); Skerfving, S., E-mail: Staffan.Skerfving@med.lu.se [Division of Occupational and Environmental Medicine, Department of Laboratory Medicine, Lund University, SE−22185 Lund (Sweden); Broberg, K., E-mail: Karin.Broberg@ki.se [Division of Occupational and Environmental Medicine, Department of Laboratory Medicine, Lund University, SE−22185 Lund (Sweden); Unit of Metals and Health, Institute of Environmental Medicine, Karolinska Institutet, Nobels väg 13, SE-171 77 Stockholm (Sweden)

2016-10-15

Purpose: Knowledge about changes in exposure to toxic metals over time remains very sparse, in particular for children, the most vulnerable group. Here, we assessed whether a reduction in environmental pollution with cadmium (Cd) and mercury (Hg) caused a change in exposure over time. In total, 1257 children (age 4–9) in two towns in Sweden were sampled once in 1986–2013. Blood concentrations of Cd (b-Cd; n=1120) and Hg (b-Hg; n=560) were determined. Results: The median b-Cd was 0.10 (geometric mean 0.10; range 0.010–0.61) μg/L and b-Hg was 0.91 (geometric mean 0.83; range 0.021–8.2) μg/L. Children living close to a smelter had higher b-Cd and b-Hg than those in urban and rural areas. There was no sex difference in b-Cd or b-Hg, and b-Cd and b-Hg showed no significant accumulation by age. b-Cd decreased only slightly (0.7% per year, p<0.001) over the study period. In contrast, b-Hg did show a clear decrease over the study period (3% per year, p<0.001). Conclusions: The exposure to Cd was very low but still might increase the risk of disease later in life. Moreover, b-Cd only showed a minor decrease, indicating that Cd pollution should be further restricted. b-Hg was relatively low and decreasing, probably because of reduced use of dental amalgam and lower Hg intake from fish. The b-Cd and b-Hg levels decreased much less than the levels of lead in the blood as previously found in the same children. - Highlights: • There are few studies of time trends for exposure to toxic metals, except for lead. • 1986–2013 we studied blood levels of cadmium and mercury in 1257 Swedish children. • The median blood concentration of cadmium was 0.10 μg/L, of mercury 0.83 μg/L. • Cadmium perhaps decreased by 0.7% per year, mercury by 3% per year. • Cadmium accumulation may result in toxic levels in elderly women.

A Comparison of Urinary Mercury between Children with Autism Spectrum Disorders and Control Children

Science.gov (United States)

Wright, Barry; Pearce, Helen; Allgar, Victoria; Miles, Jeremy; Whitton, Clare; Leon, Irene; Jardine, Jenny; McCaffrey, Nicola; Smith, Rob; Holbrook, Ian; Lewis, John; Goodall, David; Alderson-Day, Ben

2012-01-01

Background Urinary mercury concentrations are used in research exploring mercury exposure. Some theorists have proposed that autism is caused by mercury toxicity. We set out to test whether mercury concentrations in the urine of children with autism were significantly increased or decreased compared to controls or siblings. Methods Blinded cohort analyses were carried out on the urine of 56 children with autism spectrum disorders (ASD) compared to their siblings (n = 42) and a control sample of children without ASD in mainstream (n = 121) and special schools (n = 34). Results There were no statistically significant differences in creatinine levels, in uncorrected urinary mercury levels or in levels of mercury corrected for creatinine, whether or not the analysis is controlled for age, gender and amalgam fillings. Conclusions This study lends no support for the hypothesis of differences in urinary mercury excretion in children with autism compared to other groups. Some of the results, however, do suggest further research in the area may be warranted to replicate this in a larger group and with clear measurement of potential confounding factors. PMID:22355303

A comparison of urinary mercury between children with autism spectrum disorders and control children.

Directory of Open Access Journals (Sweden)

Barry Wright

Full Text Available BACKGROUND: Urinary mercury concentrations are used in research exploring mercury exposure. Some theorists have proposed that autism is caused by mercury toxicity. We set out to test whether mercury concentrations in the urine of children with autism were significantly increased or decreased compared to controls or siblings. METHODS: Blinded cohort analyses were carried out on the urine of 56 children with autism spectrum disorders (ASD compared to their siblings (n = 42 and a control sample of children without ASD in mainstream (n = 121 and special schools (n = 34. RESULTS: There were no statistically significant differences in creatinine levels, in uncorrected urinary mercury levels or in levels of mercury corrected for creatinine, whether or not the analysis is controlled for age, gender and amalgam fillings. CONCLUSIONS: This study lends no support for the hypothesis of differences in urinary mercury excretion in children with autism compared to other groups. Some of the results, however, do suggest further research in the area may be warranted to replicate this in a larger group and with clear measurement of potential confounding factors.

Reasons for Retreatment of Amalgam and Composite Restorations among the Patients Referring to Tabriz Faculty of Dentistry

Directory of Open Access Journals (Sweden)

Siavash Savadi Oskoee

2007-06-01

Full Text Available

Background and aims. Retreatment of existing restorations not only requires a lot of money and time but also there is a danger of weakening tooth structure and irritating the pulp. Since awareness of the reasons for the retreatment of teeth will save the teeth from possible future failure, the aim of this study was to assess the reasons for retreatment of amalgam and composite restorations in patients referring to Tabriz Faculty of Dentistry.

Materials and methods. In this descriptive study, the subjects had previously received an amalgam or a composite restoration in the Operative Department by dental students and were judged to need retreatment in their second visit. A total of 300 defective teeth were selected by simple random sampling method. The data was collected through examination and questionnaires and analyzed using chi-square test.

Results. There was a statistically significant association between the type of the restorative material and the reason for retreatment (p=0.001.

Conclusion. Although the reasons for the retreatment of amalgam and composite restorations were different, recurrent caries was the main reason for the retreatment for both restorative materials.

MERCURY CONTAMINATED MATERIAL DECONTAMINATION METHODS: INVESTIGATION AND ASSESSMENT

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian, Ph.D.

2001-01-01

Over the years mercury has been recognized as having serious impacts on human health and the environment. This recognition has led to numerous studies that deal with the properties of various mercury forms, the development of methods to quantify and speciate the forms, fate and transport, toxicology studies, and the development of site remediation and decontamination technologies. This report reviews several critical areas that will be used in developing technologies for cleaning mercury from mercury-contaminated surfaces of metals and porous materials found in many DOE facilities. The technologies used for decontamination of water and mixed wastes (solid) are specifically discussed. Many technologies that have recently appeared in the literature are included in the report. Current surface decontamination processes have been reviewed, and the limitations of these technologies for mercury decontamination are discussed. Based on the currently available technologies and the processes published recently in the literature, several processes, including strippable coatings, chemical cleaning with iodine/iodide lixiviant, chemisorbing surface wipes with forager sponge and grafted cotton, and surface/pore fixation through amalgamation or stabilization, have been identified as potential techniques for decontamination of mercury-contaminated metal and porous surfaces. Their potential merits and applicability are discussed. Finally, two processes, strippable coatings and chemical cleaning with iodine/iodide lixiviant, were experimentally investigated in Phase II of this project.

Bond strength of resin composite to differently conditioned amalgam

NARCIS (Netherlands)

Ozcan, M; Vallittu, PK; Huysmans, MC; Kalk, W; Vahlberg, T

Bulk fracture of teeth, where a part of the amalgam restoration and/or the cusp is fractured, is a common clinical problem. The aim of this study was to evaluate the effect of different surface conditioning methods on the shear bond strength of a hybrid resin composite to fresh amalgam. Amalgams (N

Synthesis and characterization of dental composites

Science.gov (United States)

Djustiana, Nina; Greviana, Nadia; Faza, Yanwar; Sunarso

2018-02-01

During the last few decades, the increasing demands in esthetic dentistry have led to the development of dental composites material that provide similar appearance to the natural teeth. Recently, esthetic trend was an issue which increase the demand for teeth restorations that is similar with the origin. The esthetics of dental composite are more superior compared to amalgam, since its color look similar with natural teeth. Various dental composites have been developed using many type of fillers such as amorphous silica, quartz), borosilicate, Li-Sr-Ba-Al glass and oxide: zirconia and alumina. Researchers in Faculty of Dentistry University of Padjadjaran have prepared dental composites using zirconia-alumina-silica (ZAS) system as the filler. The aim is to improve the mechanical properties and the esthetic of the dental composites. The ZAS was obtained from chemical grade purity chemicals and Indonesia's natural sand as precursors its characterization were also presented. This novel method covers the procedure to synthesis and characterize dental composites in Padjadjaran University and some review about dental composites in global research.

Increased Microleakage of Amalgam Restorations after Exposure to 2.4 Ghz Radiofrequency Electromagnetic Fields from Common Wi-Fi Routers

Directory of Open Access Journals (Sweden)

Mortazavi SMJ

2017-09-01

Full Text Available Statement of Problem: Previous studies have shown that exposure of dental amalgam fillings to MRI and mobile phones can increase microleakage of amalgam restorations. Objectives: The aim of this study was to evaluate the effects of exposure to radiofrequency radiation emitted from indoor Wi-Fi access devices on microleakage of amalgam restorations. Materials and Methods: Standard class V cavities were prepared on the buccal surfaces of 69 extracted human premolar teeth. The samples were divided into two exposure groups and one non-exposed control group of 23 teeth each. The specimens in the experimental groups were exposed to a radiofrequency (RF radiation emitted from a commercial 2.4 GHz Wi Fi router. The distance between the Wi-Fi router and samples was 30 cm and the router was exchanging data with a laptop computer that was placed 20 m away from the router. Teeth samples in the first exposure group (group A were exposed to RF for 3 days while the second exposure group (group B was exposed for 6 days. Then the teeth were sectioned and scored for microleakage under a stereomicroscope. Results: The score of microleakage was significantly higher in the exposure group A compared to that of the control group. However, the score of microleakage was not significantly different between the exposure group B and control group. Furthermore, the scores of microleakage was signifi-cantly higher in the exposure group A than that of the exposure group B. Conclusions: Exposure of patients with amalgam restorations to radiofre-quency waves emitted from commercial Wi-Fi routers can lead to in-creased microleakage of amalgam restorations.

Artifacts by dental materials on magnetic resonance imaging

International Nuclear Information System (INIS)

Hong, Hyun Sook; Choi, Deuk Lin; Kim, Ki Jung; Suh, Won Hyuck

1992-01-01

Magnetic resonance imaging (MRI) has proved to be a valuable method for evaluation of the head and neck. Unfortunately, metallic devices associated with certain dental fillings and appliances often cause variable artifacts that can obscure normal or pathologic conditions on MR and computed tomography. In this work, we assessed the MR appearance of dental prosthetic materials in vitro and in vivo including precious alloys, nonprecions alloys, resin, amalgam and titanium alloy. For in vivo studies, these materials were placed in healthy volunteer's mouths and then images were assessed. Analysis of the appearance of shape and extent of artifact, and observed influence of these artifacts on the image interpretation at 0.2 Tesla permanent type MR scanner were valuated. Material used as temporary or permanent filling of crowns such as amalgam, precious alloy and, microfilled resin did not cause artifact on the image. The size of the artifact produced by the nonprecious alloys was influenced by the ferromagnetism of the object and the volume prosthesis, and was related to the scanning sequence. Nonprecious alloys produced minimal local signal distortion, where precious alloys, and dental resin had no effect on the MR images in vivo. These results were mainly from a low field strength MR scanner used in this study

Voltammetric behavior of osmium-labeled DNA at mercury meniscus-modified solid amalgam electrodes. Detecting DNA hybridization

Czech Academy of Sciences Publication Activity Database

Josypčuk, Bohdan; Fojta, Miroslav; Havran, Luděk; Heyrovský, Michael; Paleček, Emil

2006-01-01

Roč. 18, č. 2 (2006), s. 186-194 ISSN 1040-0397 R&D Projects: GA MPO 1H-PK/42; GA AV ČR IAA4004402; GA AV ČR KJB4004302; GA AV ČR IBS5004355 Institutional research plan: CEZ:AV0Z40400503; CEZ:AV0Z50040507 Keywords : voltammetry * solid amalgam electrodes * DNA-osmium complex * hybridization * catalytic hydrogen evolution Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.444, year: 2006

Magnetic susceptibility and electrical conductivity of metallic dental materials and their impact on MR imaging artifacts

Czech Academy of Sciences Publication Activity Database

Starčuková, Jana; Starčuk jr., Zenon; Hubálková, H.; Linetskiy, I.

2008-01-01

Roč. 24, č. 6 (2008), s. 715-723 ISSN 0109-5641 R&D Projects: GA MZd NR8110 Institutional research plan: CEZ:AV0Z20650511 Keywords : metallic dental materials * dental alloys * amalgams * MR imaging * magnetic susceptibility * electric conductivity * image artifact Subject RIV: FF - HEENT, Dentistry Impact factor: 2.941, year: 2008

Decommissioning and safety issues of liquid-mercury waste generated from high power spallation sources with particle accelerators

CERN Document Server

Chiriki, S; Odoj, R; Moormann, R; Hinssen, H. K; Bukaemskiy, A

2009-01-01

Large spallation sources are intended to be constructed in Europe (EURISOL nuclear physics facility and ESS-European Spallation Source). These facilities accumulate more than 20 metric tons of irradiated mercury in the target, which has to be treated as highly radioactive and chemo-toxic waste. Because solids are the only appropriate (immobile) form for this radiotoxic and toxic type of waste solidification is required for irradiated mercury. Our irradiation experimental studies on mercury waste revealed that mercury sulfide is a reasonable solid for disposal and shows larger stability in assumed accidents with water ingress in a repository compared to amalgams. For preparation of mercury sulfide a wet process is more suitable than a dry one. It is easier to perform under hot cell conditions and allows complete Hg-conversion. Embedding HgS in a cementitious matrix increases its stability.

Does Magnetic Resonance Imaging Affect the Microleakage of Amalgam Restorations?

International Nuclear Information System (INIS)

Akgun, Ozlem Marti; Polat, Gunseli Guven; Turan Illca, Ahmet; Yildirim, Ceren; Demir, Pervin; Basak, Feridun

2014-01-01

The effect of MRI on microleakage of amalgam restorations is an important health issue that should be considered. If MRI application causes increase of microleakage, amalgam fillings should be reassessed after MRI and replaced if necessary. The aim of this study is to compare the effect of magnetic resonance imaging (MRI) on microleakage of class II bonded amalgam versus classical amalgam restorations. Class II cavities (3 mm width × 1.5 mm depth) with gingival margins ending 1 mm below the cementoenamel junction (CEJ) were prepared in 40 permanent molar teeth. The teeth were randomly divided into four groups. Cavities in the first and second groups were restored with dentin adhesive and amalgam (bonded amalgam), and those in the third and fourth groups with amalgam only. MRI was performed with the teeth specimens from the first and third groups. All specimens were then thermocycled at 5° to 55° C with a 30-second dwell time for 1000 cycles. The samples were then immersed in 0.5% methylene blue dye for 24 hours and sectioned longitudinally. Dye penetration at the occlusal and gingival margins was quantified by 15× stereomicroscopy. IBM SPSS Statistics ver. 21.0 (IBM Corp., Released 2012., IBM SPSS Statistics for Windows, Armonk, NY: IBM Corp.) and MS-Excel 2007 programs were used for statistical analyses and calculations. “nparLD” module was used for F2-LD-F1 design analysis at R program. P<0.05 was considered statistically significant. In teeth with amalgam filling, there were no significant differences of occlusal and gingival surface microleakage after MRI exposure. Occlusal and gingival surface microleakages were also similar with and without MRI in teeth with bonded amalgam filling. The results of this study suggest that MRI does not increase microleakage of amalgam restorations

Bad metal behaviour in the new Hg-rich amalgam KHg{sub 6} with polar metallic bonding

Energy Technology Data Exchange (ETDEWEB)

Tambornino, Frank; Hoch, Constantin, E-mail: constantin.hoch@cup.uni-muenchen.de

2015-01-05

Highlights: • The novel Hg-rich amalgam KHg{sub 6} was synthesised by electrocrystallisation. • The structure was investigated by single crystal and powder diffraction. • Thermal decomposition, electric resistance and magnetic susceptibiliy were examined. • Band structure, total and partial density of states and Bader charges were calculated. • Bad metal behaviour results from ionic, metallic and covalent bonding contributions. - Abstract: The new mercury-rich amalgam KHg{sub 6} crystallises with the BaHg{sub 6} structure type (orthorhombic, space group Pnma (No. 62), a = 13.394(9) Å, b = 5.270(3) Å, c = 10.463 Å). It was prepared by electrolysis of a solution of KI in N,N′-Dimethylformamide at 343 K at a reactive Hg cathode. The structure of KHg{sub 6} shows motifs of ionic packing, covalent Hg cluster formation and metallic properties. KHg{sub 6} decomposes peritectically at 443 K. The combination of alkali metals with a noble metal with moderate electron affinity results in the formation of polar metal–metal bonding with considerable but incomplete electron transfer from the electropositive to the electronegative sublattice, resulting in typical “bad metal behaviour”, illustrated by resistance and susceptibility measurements and quantum theoretical calculations.

Marginal microfiltration in amalgam restorations. Review

OpenAIRE

Lahoud Salem, Víctor

2014-01-01

The present articule is review references from phenomenon of microfiltration in restorations with amalgam and yours consecuents in changes of color in the interface tooth-restorations, margin deterioted , sensitivity dentinarea postoperate, caries secondary and pulp inflamation. Besides naming the mechanicals for to reduce microfiltration, and yours effects for use of sealers dentinaries representation for the varnish cavitys and adhesive systens Conclusive indicate wath the amalgam is the ma...

MERCURY CONTAMINATED MATERIAL DECONTAMINATION METHODS: INVESTIGATION AND ASSESSMENT; TOPICAL

International Nuclear Information System (INIS)

M.A. Ebadian, Ph.D.

2001-01-01

Over the years mercury has been recognized as having serious impacts on human health and the environment. This recognition has led to numerous studies that deal with the properties of various mercury forms, the development of methods to quantify and speciate the forms, fate and transport, toxicology studies, and the development of site remediation and decontamination technologies. This report reviews several critical areas that will be used in developing technologies for cleaning mercury from mercury-contaminated surfaces of metals and porous materials found in many DOE facilities. The technologies used for decontamination of water and mixed wastes (solid) are specifically discussed. Many technologies that have recently appeared in the literature are included in the report. Current surface decontamination processes have been reviewed, and the limitations of these technologies for mercury decontamination are discussed. Based on the currently available technologies and the processes published recently in the literature, several processes, including strippable coatings, chemical cleaning with iodine/iodide lixiviant, chemisorbing surface wipes with forager sponge and grafted cotton, and surface/pore fixation through amalgamation or stabilization, have been identified as potential techniques for decontamination of mercury-contaminated metal and porous surfaces. Their potential merits and applicability are discussed. Finally, two processes, strippable coatings and chemical cleaning with iodine/iodide lixiviant, were experimentally investigated in Phase II of this project

Detecting Airborne Mercury by Use of Palladium Chloride

Science.gov (United States)

Ryan, Margaret; Shevade, Abhijit; Kisor, Adam; Homer, Margie; Jewell, April; Manatt, Kenneth; Torres, Julia; Soler, Jessica; Taylor, Charles

2009-01-01

Palladium chloride films have been found to be useful as alternatives to the gold films heretofore used to detect airborne elemental mercury at concentrations of the order of parts per billion (ppb). Somewhat more specifically, when suitably prepared palladium chloride films are exposed to parts-per-billion or larger concentrations of airborne mercury, their electrical resistances change by amounts large enough to be easily measurable. Because airborne mercury adversely affects health, it is desirable to be able to detect it with high sensitivity, especially in enclosed environments in which there is a risk of leakage of mercury from lamps or other equipment. The detection of mercury by use of gold films involves the formation of gold/mercury amalgam. Gold films offer adequate sensitivity for detection of airborne mercury and could easily be integrated into an electronic-nose system designed to operate in the temperature range of 23 to 28 C. Unfortunately, in order to regenerate a gold-film mercury sensor, one must heat it to a temperature of 200 C for several minutes in clean flowing air. In preparation for an experiment to demonstrate the present sensor concept, palladium chloride was deposited from an aqueous solution onto sets of gold electrodes and sintered in air to form a film. Then while using the gold electrodes to measure the electrical resistance of the films, the films were exposed, at a temperature of 25 C, to humidified air containing mercury at various concentrations from 0 to 35 ppb (see figure). The results of this and other experiments have been interpreted as signifying that sensors of this type can detect mercury in room-temperature air at concentrations of at least 2.5 ppb and can readily be regenerated at temperatures <40 C.

Determination of total mercury in fillets of sport fishes collected from Folsom Reservoir, California, 2006

Science.gov (United States)

May, Thomas W.; Brumbaugh, William G.

2007-01-01

This report presents the results of a study by the U.S. Geological Survey, done in cooperation with the U.S. Bureau of Reclamation, to determine mercury concentrations in selected sport fishes from Folsom Reservoir in California. Fillets were collected from each fish sample, and after homogenization and lyophilization of fish fillets, mercury concentrations were determined with a direct mercury analyzer utilizing the process of thermal combustion-gold amalgamation atomic absorption spectroscopy. Mercury concentrations in fillets ranged from 0.031 to 0.20 micrograms per gram wet weight in rainbow trout (Oncorhynchus mykiss) samples and 0.071 to 0.16 micrograms per gram wet weight in bluegill (Lepomis macrochirus) samples. Mercury concentration was 0.98 microgram per gram wet weight in a single spotted bass (Micropterus punctulatus) sample, which was the only one in the sample set which exceeded the U.S. Environmental Protection Agency's fish consumption advisory of 0.30 microgram per gram wet weight.

Mercury pollution by mining activities in Rayo Rojo mining district, Apolobamba (Bolivia)

Science.gov (United States)

Teran-Mita, T.; Faz Cano, A.; Muñoz, M.; Millán, R.; Salvador, F.

2009-04-01

In Bolivia, metal mining activities since historical times have been one of the most important causes of the environmental degradation. This is the case of the Natural Integrated Management Area of Apolobamba (Department of La Paz, Bolivia), where intense gold mining activities have been carried out from former times to present days, with very little gold extraction and very scarce mineral processing technology. In Apolobamba mercury is still being used in the amalgam processes and this might conduct to high Hg contents. Inhabitants of this area consume fish from lakes and rivers, and use the waters for the livestock, domestic use, and irrigation. The aim of this work was to evaluate mercury impact into the soil-plant-water system. The Technical University of Cartagena, Spain, through the Research Group "Sustainable Use, Management and Reclamation of Soil and Water", carried out a research, in the most intense affected gold extraction zones in Apolobamba, among them Rayo Rojo, where mining activity is mainly gold extraction, although the extracted mineral volume and technology used is low. Rayo Rojo is located in the central part of ANMI - Apolobamba (in the andean region), inside of Pelechuco municipality; the area belongs biogeographically to the Altoandina and Puna. This district, located in Apolobamba mountain-range, where altitudes above 5.000 m.a.s.l are reached. Water, soil, sediment and plant samples were taken around the operations mining sites and total mercury analysed. Mercury content was determined by AMA-254 model, based on the thermal decomposition of the sample and collection of the Hg vapour on a gold amalgamator. The analysis is performed from solid samples without any further preparation. Samples are initially dried at 125°C and then thermally decomposed at the temperature of 550°C. Mercury vapour is then trapped on the gold amalgamator. AMA-254 method certificated standards were BCR 62-BCR 281. Preliminary results show high Hg concentrations

SULFUR POLYMER STABILIZATION/SOLIDIFICATION (SPSS) TREATABILITY OF LOS ALAMOS NATIONAL LABORATORY MERCURY WASTE

International Nuclear Information System (INIS)

ADAMS, J.W.; KALB, P.D.

2001-01-01

Brookhaven National Laboratory's Sulfur Polymer Stabilization/Solidification (SPSS) process was used to treat approximately 90kg of elemental mercury mixed waste from Los Alamos National Laboratory. Treatment was carried out in a series of eight batches using a 1 ft(sup 3) pilot-scale mixer, where mercury loading in each batch was 33.3 weight percent. Although leach performance is currently not regulated for amalgamated elemental mercury (Hg) mixed waste, Toxicity Characteristic Leach Procedure (TCLP) testing of SPSS treated elemental mercury waste indicates that leachability is readily reduced to below the TCLP limit of 200 ppb (regulatory requirement following treatment by retort for wastes containingandgt; 260 ppb Hg), and with process optimization, to levels less than the stringent Universal Treatment Standard (UTS) limit of 25 ppb that is applied to waste containingandlt; 260 ppm Hg. In addition, mercury-contaminated debris, consisting of primary glass and plastic containers, as well as assorted mercury thermometers, switches, and labware, was first reacted with SPSS components to stabilize the mercury contamination, then macroencapsulated in the molten SPSS product. This treatment was done by vigorous agitation of the sulfur polymer powder and the comminuted debris. Larger plastic and metal containers were reacted to stabilize internal mercury contamination, and then filled with molten sulfur polymer to encapsulate the treated product

Determination of ablation threshold for composite resins and amalgam irradiated with femtosecond laser pulses

International Nuclear Information System (INIS)

Freitas, A Z; Samad, R E; Zezell, D M; Vieira Jr, N D; Freschi, L R; Gouw-Soares, S C

2010-01-01

The use of laser for caries removal and cavity preparation is already a reality in the dental clinic. The objective of the present study was to consider the viability of ultrashort laser pulses for restorative material selective removal, by determining the ablation threshold fluence for composite resins and amalgam irradiated with femtosecond laser pulses. Lasers pulses centered at 830 nm with 50 fs of duration and 1 kHz of repetition rate, with energies in the range of 300 to 770 μJ were used to irradiate the samples. The samples were irradiated using two different geometrical methods for ablation threshold fluence determinations and the volume ablation was measured by optical coherence tomography. The shape of the ablated surfaces were analyzed by optical microscopy and scanning electron microscopy. The determined ablation threshold fluence is 0.35 J/cm 2 for the composite resins Z-100 and Z-350, and 0.25 J/cm 2 for the amalgam. These values are half of the value for enamel in this temporal regime. Thermal damages were not observed in the samples. Using the OCT technique (optical coherence tomography) was possible to determine the ablated volume and the total mass removed

Assessment of mercury contamination in African sub-Saharan freshwater reservoirs (Burkina Faso)

Energy Technology Data Exchange (ETDEWEB)

Ousseni, O.; Marc, A. [Montreal Univ., PQ (Canada)

2010-07-01

Despite an increase in artisanal gold mining with metallic mercury (Hg) amalgamation in Burkina Faso since 1990, there is no data on the potential impact of Hg contamination on aquatic systems. This presentation reported on a study that evaluated environmental mercury contamination by determining the total mercury (THg) and methylmercury (MeHg) concentrations in water and 350 muscle tissues of fish samples from 13 reservoirs in Burkina Faso. Mercury was analyzed by cold vapour atomic fluorescence spectrometry technique using Tekran 2600 mercury analyzer (CV-AFS) after oxidization by BrCl and reduction by SnCl{sub 2}. The range of Hg concentration for THg and MeHg in water was presented along with the Fish THg level range. The study showed that most mercury was in the particulate form as a result of rainfall runoff. Most fish mercury concentrations were below the Health Canada guideline limit. However, the Hg level in one fish species (Bagrus bajad) was above the World Health Organization (WHO) international trade guideline limit. The study showed that in general, most fish species are not highly contaminated by Hg, with the exception of Bagrus bajad. It was concluded that future studies should consider consumption patterns of different subpopulations in order to evaluate risk and develop policy recommendations.

Impact of gold mining associated with mercury contamination in soil, biota sediments and tailings in Kenya.

Science.gov (United States)

Odumo, Benjamin Okang'; Carbonell, Gregoria; Angeyo, Hudson Kalambuka; Patel, Jayanti Purshottam; Torrijos, Manuel; Rodríguez Martín, José Antonio

2014-11-01

This work considered the environmental impact of artisanal mining gold activity in the Migori-Transmara area (Kenya). From artisanal gold mining, mercury is released to the environment, thus contributing to degradation of soil and water bodies. High mercury contents have been quantified in soil (140 μg kg(-1)), sediment (430 μg kg(-1)) and tailings (8,900 μg kg(-1)), as expected. The results reveal that the mechanism for transporting mercury to the terrestrial ecosystem is associated with wet and dry depositions. Lichens and mosses, used as bioindicators of pollution, are related to the proximity to mining areas. The further the distance from mining areas, the lower the mercury levels. This study also provides risk maps to evaluate potential negative repercussions. We conclude that the Migori-Transmara region can be considered a strongly polluted area with high mercury contents. The technology used to extract gold throughout amalgamation processes causes a high degree of mercury pollution around this gold mining area. Thus, alternative gold extraction methods should be considered to reduce mercury levels that can be released to the environment.

Assessment of exposures and potential risks to the US adult population from wear (attrition and abrasion) of gold and ceramic dental restorations.

Science.gov (United States)

Richardson, G Mark; Clemow, Scott R; Peters, Rachel E; James, Kyle J; Siciliano, Steven D

2016-01-01

Little has been published on the chemical exposures and risks of dental restorative materials other than from dental amalgam and composite resins. Here we provide the first exposure and risk assessment for gold (Au) alloy and ceramic restorative materials. Based on the 2001-2004 US National Health and Nutrition Examination Survey (NHANES), we assessed the exposure of US adults to the components of Au alloy and ceramic dental restorations owing to dental material wear. Silver (Ag) is the most problematic component of Au alloy restorations, owing to a combination of toxicity and proportional composition. It was estimated that adults could possess an average of four tooth surfaces restored with Au alloy before exceeding, on average, the reference exposure level (REL) for Ag. Lithium (Li) is the most problematic component of dental ceramics. It was estimated that adults could possess an average of 15 tooth surfaces restored with ceramics before exceeding the REL for Li. Relative risks of chemical exposures from dental materials decrease in the following order: Amalgam>Au alloys>ceramics>composite resins.

The Thickness of Amalgamations and Cartesian Product of Graphs

Directory of Open Access Journals (Sweden)

Yang Yan

2017-08-01

Full Text Available The thickness of a graph is the minimum number of planar spanning subgraphs into which the graph can be decomposed. It is a measurement of the closeness to the planarity of a graph, and it also has important applications to VLSI design, but it has been known for only few graphs. We obtain the thickness of vertex-amalgamation and bar-amalgamation of graphs, the lower and upper bounds for the thickness of edge-amalgamation and 2-vertex-amalgamation of graphs, respectively. We also study the thickness of Cartesian product of graphs, and by using operations on graphs, we derive the thickness of the Cartesian product Kn □ Pm for most values of m and n.

A systematic review of dental disease management in cancer patients

DEFF Research Database (Denmark)

Hong, Catherine H L; Hu, Shijia; Haverman, Thijs

2018-01-01

INTRODUCTION: This systematic review aims to update on the prevalence of odontogenic-related infections and the efficacy of dental strategies in preventing dental-related complications in cancer patients since the 2010 systematic review. REVIEW METHOD: A literature search was conducted in the dat....../treatment protocols. The use of chlorhexidine, fluoride mouth rinses as well as composite resin, resin-modified glass ionomer cement (GIC), and amalgam restorations over conventional GIC in post head and neck radiation patients who are compliant fluoride users is recommended....

Factorial design analysis on the solubility of total mercury in reduction process = Análise do processo experimental na solubilidade do mercúrio total em processo redutivo

Directory of Open Access Journals (Sweden)

Raquel Dalla Costa

2007-07-01

Full Text Available The dental wastewater can contribute to the total daily mercury load on the environment. Factorial design of experiments is useful to analyze factors that influence this solubility. The aim of the present study was to design experiments to examine the effects ofoperational variables, humic acid, temperature, pH and contact time that may affect the solubility of total mercury as dental amalgam residue in reduction process. Based on the factorial design of experiments, the humic acid concentration was the most significant factor in this process, followed by other factors. The parameters affecting the solubility of total mercury showed that when the [HA], T and CT increases and pH decreases there is an important increase of total mercury concentration in process. For the tested conditions, thehigh total mercury concentration was obtained using the humic acid concentration = 1.0 g L-1, temperature = 35oC, pH = 4.0 and contact time = 10 days.O esgoto odontológico pode contribuir na carga total de mercúrio noambiente. O estudo do planejamento experimental é útil para analisar os fatores que influenciam nesta solubilidade. O objetivo deste trabalho foi realizar um planejamento experimental para analisar os efeitos das variáveis operacionais, ácido húmico, temperatura,pH e tempo de contato, que podem afetar a solubilidade do mercúrio total como amálgama odontológico em um processo de redução. Baseado no planejamento experimental, a concentração de ácido húmico foi o fator mais significativo no processo, seguido dos demais fatores. Os parâmetros que afetam a solubilidade do mercúrio total mostram que quando a [AH], T e TC aumentam e o pH diminui há um aumento significativo na concentração de mercúrio total no processo. A maior concentração de mercúrio total foi obtido nas condições de concentração de ácido húmico = 1,0 g L-1, temperatura = 35oC, pH = 4,0 e tempo de contato = 10 dias.

Measurement of in-vivo dosage increase due to dental alloys during therapeutic irradiation of the mouth cavity

International Nuclear Information System (INIS)

Thilmann, C.; Mose, S.; Saran, F.; Schopohl, B.; Boettcher, H.D.

1995-01-01

The degree of dosage increase in the immediate surrounding of metallic dental materials was measured in an in-vivo study during therapeutic irradiation with 60 Co gamma rays in the area of mouth cavity of 11 patients. Measurements were carried out by thermoluminescent dosimetry at permamently fixed golden teeth and alloy specimens containing gold and palladium and amalgam. The following relative dodage values according to a simultanelusly measured reference value were measured at the surface of the different dental materials: 161% near fixed golden caps, 168% near the specimen containing gold in a high percentage, 133% near the specimen of palladium and 161% near the specimen of amalgam. The in vivo measured dosage increases due to metallic dental prosthesis are less than values obtained using back scatter arramgements for irradiating phantoms. Despite this, they could be of clinical relevance. Thus the usage of a mucous membrane protection during irradiation with 60 Co, as a means of preventing local lesions of the oral mucosa, due to dental alloys within the treatment volume remains inevitable. (orig.) [de

Disposal strategy of proton irradiated mercury from high power spallation sources

International Nuclear Information System (INIS)

Chiriki, Suresh

2010-01-01

Large spallation sources are intended to be constructed in Europe (EURISOL: nuclear physics research facility and ESS: European Spallation Source). These facilities would accumulate more than 20 metric tons of irradiated mercury in the target, which has to be treated as highly radioactive and chemo-toxic waste. Liquid waste cannot be tolerated in European repositories. As part of this work on safety/decommissioning of high-power spallation sources, our investigations were focused mainly to study experimentally and theoretically the solidification of liquid mercury waste (selection of an adequate solid mercury form and of an immobilization matrix, chemical engineering process studies on solidification/stabilization and on encapsulating in a matrix). Based on experimental results and supported by literature Hg-chalcogens (HgS, HgSe) will be more stable in repositories than amalgams. Our irradiation experimental studies on mercury waste revealed that mercury sulfide is a reasonable solid for disposal and shows larger stability in possible accidents with water ingress in a repository. Additionally immobilization of mercury in a cement matrix and polysiloxane matrix were tested. HgS formation from liquid target mercury by a wet process is identified as a suitable formation procedure. These investigations reveal that an almost 99.9% elementary Hg conversion can be achieved and that wet process can be reasonably handled under hot cell conditions. (orig.)

Disposal strategy of proton irradiated mercury from high power spallation sources

Energy Technology Data Exchange (ETDEWEB)

Chiriki, Suresh

2010-07-01

Large spallation sources are intended to be constructed in Europe (EURISOL: nuclear physics research facility and ESS: European Spallation Source). These facilities would accumulate more than 20 metric tons of irradiated mercury in the target, which has to be treated as highly radioactive and chemo-toxic waste. Liquid waste cannot be tolerated in European repositories. As part of this work on safety/decommissioning of high-power spallation sources, our investigations were focused mainly to study experimentally and theoretically the solidification of liquid mercury waste (selection of an adequate solid mercury form and of an immobilization matrix, chemical engineering process studies on solidification/stabilization and on encapsulating in a matrix). Based on experimental results and supported by literature Hg-chalcogens (HgS, HgSe) will be more stable in repositories than amalgams. Our irradiation experimental studies on mercury waste revealed that mercury sulfide is a reasonable solid for disposal and shows larger stability in possible accidents with water ingress in a repository. Additionally immobilization of mercury in a cement matrix and polysiloxane matrix were tested. HgS formation from liquid target mercury by a wet process is identified as a suitable formation procedure. These investigations reveal that an almost 99.9% elementary Hg conversion can be achieved and that wet process can be reasonably handled under hot cell conditions. (orig.)

Jordanian dentists' knowledge and implementation of eco-friendly dental office strategies.

Science.gov (United States)

Al Shatrat, Sabha M; Shuman, Deanne; Darby, Michele L; Jeng, Hueiwang A

2013-06-01

To investigate the implementation of eco-friendly dental office strategies by Jordanian dentists. Self-designed questionnaires were provided to 150 dentists working in private dental practices in the city of Amman, the capital of Jordan. Dentists' names and addresses were obtained from the Jordanian Dental Association. Overall, the level of knowledge about eco-friendly dental offices strategies was high for amalgam, radiology, paper waste, infection control and energy and water conservation. In terms of implementation, the majority of Jordanian dentists apply few eco-friendly dental offices strategies. The most frequently identified barriers to implementation of eco-friendly dental offices strategies were cost and lack of incentives from the government. Most Jordanian dental practices are not eco-friendly. A continued focus on the impact of dental practices on the environment is needed through formal and continuing dental education. Results of this study can guide policy development to encourage implementation of eco-friendly strategies. © 2013 FDI World Dental Federation.

Total mercury levels in commercial fish species from Italian fishery and aquaculture.

Science.gov (United States)

Di Lena, Gabriella; Casini, Irene; Caproni, Roberto; Fusari, Andrea; Orban, Elena

2017-06-01

Total mercury levels were measured in 42 commercial fish species caught off the Central Adriatic and Tyrrhenian coasts of Italy and in 6 aquaculture species. The study on wild fish covered species differing in living habitat and trophic level. The study on farmed fish covered marine and freshwater species from intensive and extensive aquaculture and their feed. Mercury levels were analysed by thermal decomposition-amalgamation-atomic absorption spectrophotometry. Total mercury concentrations in the muscle of wild fish showed a high variability among species (0.025-2.20 mg kg -1 wet weight). The lowest levels were detected in low trophic-level demersal and pelagic-neritic fish and in young individuals of high trophic-level species. Levels exceeding the European Commission limits were found in large-size specimens of high trophic-level pelagic and demersal species. Fish from intensive farming showed low levels of total mercury (0.008-0.251 mg kg -1 ). Fish from extensive rearing showed variable contamination levels, depending on the area of provenience. An estimation of the human intake of mercury associated to the consumption of the studied fish and its comparison with the tolerable weekly intake is provided.

An evaluation of a lathe-cut high-copper amalgam alloy.

Science.gov (United States)

Knibbs, P J; Plant, C G; Shovelton, D S; Jones, P A

1987-09-01

Modification of an amalgam alloy may give rise to improved physical properties. The physical properties of a newly formulated, single-composition lathe-cut amalgam alloy were studied and found to be superior to those of a conventional lathe-cut amalgam alloy. However, such modification in formulation may result in changes in the clinical handling properties of the material. The high-copper amalgam alloy was assessed by a panel of general practitioners who found that the general handling properties of the material were similar to those of conventional lathe-cut amalgam alloys. The longer term performance of the high-copper alloy was assessed by means of a blind, controlled clinical trial carried out by two operators. A 1-year assessment of the resulting restorations and tooth replicas could not distinguish between the high-copper alloy and a conventional alloy. The two alloys had both given good clinical results.

Verification of Applicability of Mercury Meniscus Modified Silver Solid Amalgam Electrode for Determination of Heavy Metals in Plant matrices

Czech Academy of Sciences Publication Activity Database

Čížková, P.; Navrátil, Tomáš; Šestáková, Ivana; Josypčuk, Bohdan

2007-01-01

Roč. 19, 2-3 (2007), s. 161-171 ISSN 1040-0397 R&D Projects: GA MPO 1H-PK/42; GA ČR GA521/06/0496 Institutional research plan: CEZ:AV0Z40400503 Keywords : voltammetry * biological materials * solid amalgam electrode * atomic absorption spectroscopy Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.949, year: 2007

SULFUR POLYMER STABILIZATION/SOLIDIFICATION (SPSS) TREATABILITY OF LOS ALAMOS NATIONAL LABORATORY MERCURY WASTE.

Energy Technology Data Exchange (ETDEWEB)

ADAMS,J.W.; KALB,P.D.

2001-11-01

Brookhaven National Laboratory's Sulfur Polymer Stabilization/Solidification (SPSS) process was used to treat approximately 90kg of elemental mercury mixed waste from Los Alamos National Laboratory. Treatment was carried out in a series of eight batches using a 1 ft{sup 3} pilot-scale mixer, where mercury loading in each batch was 33.3 weight percent. Although leach performance is currently not regulated for amalgamated elemental mercury (Hg) mixed waste, Toxicity Characteristic Leach Procedure (TCLP) testing of SPSS treated elemental mercury waste indicates that leachability is readily reduced to below the TCLP limit of 200 ppb (regulatory requirement following treatment by retort for wastes containing > 260 ppb Hg), and with process optimization, to levels less than the stringent Universal Treatment Standard (UTS) limit of 25 ppb that is applied to waste containing < 260 ppm Hg. In addition, mercury-contaminated debris, consisting of primary glass and plastic containers, as well as assorted mercury thermometers, switches, and labware, was first reacted with SPSS components to stabilize the mercury contamination, then macroencapsulated in the molten SPSS product. This treatment was done by vigorous agitation of the sulfur polymer powder and the comminuted debris. Larger plastic and metal containers were reacted to stabilize internal mercury contamination, and then filled with molten sulfur polymer to encapsulate the treated product.

Working electrodes from amalgam paste for electrochemical measurements

Czech Academy of Sciences Publication Activity Database

Josypčuk, Bohdan; Šestáková, Ivana

2008-01-01

Roč. 20, č. 4 (2008), s. 426-433 ISSN 1040-0397 R&D Projects: GA ČR GA203/07/1195; GA ČR GA521/06/0496 Institutional research plan: CEZ:AV0Z40400503 Keywords : voltammetry * paste amalgam * silver amalgam * paste electrode Subject RIV: CG - Electrochemistry Impact factor: 2.901, year: 2008

Environmental assessment of mercury pollution in urban tailings from gold mining.

Science.gov (United States)

Leiva, Manuel A G; Morales, Sandra

2013-04-01

It is well-known that small-scale artisanal mining is a source of mercury emissions into the environment, mainly from the use of rudimentary technologies that use mercury amalgamation in the extraction process. Mines near Andacollo, which is located in the Coquimbo region of Chile, use primitive methods to mine gold and copper. In this study, we determined the mercury content of gold mining wastes from Andacollo. At each site, we randomly sampled the soil at the surface and at a depth of 2 m following the ISO 10381 guidelines. Mercury analysis was performed with a direct mercury analyzer. At least one site was contaminated at a mercury concentration of 13.6±1.4 mg kg(-1), which was above the international recommendations that were set by the Canadian Council of Ministers of the Environment's soil quality guidelines (CA-SQG) and the Dutch guidelines (NL-RIVM). At least four of the fourteen sites in this study were within the control and tolerance levels of these recommendations. Better characterization of these sites is required to establish whether they represent a risk to the local community. Based on the US-EPA recommendations, which have a higher tolerance limit, none of the fourteen sites should pose a risk to humans. Copyright © 2013 Elsevier Inc. All rights reserved.

2011 AFMS Medical Research Symposium Held in National Harbor, Maryland on August 2-4, 2011. Volume 1: Plenary Sessions, Presentation & Poster Abstracts

Science.gov (United States)

2011-08-01

grade nanoparticles--ZnO, TiO2 , and CeO2, were studied for personal protective equipment (PPE) efficiency, initial uptake by cell lines, and...bioaccumulation in humans. For example, mercury exposure can come from dental amalgams, fish consumption, and drinking water. We are using single stranded...with a yellow metabolic dye (MTT). Live cells convert MTT to an intense purple color , whereas dead cells remain yellow. While this method is a

Reduction of metal artifact in three-dimensional computed tomography (3D CT) with dental impression materials.

Science.gov (United States)

Park, W S; Kim, K D; Shin, H K; Lee, S H

2007-01-01

Metal Artifact still remains one of the main drawbacks in craniofacial Three-Dimensional Computed Tomography (3D CT). In this study, we tried to test the efficacy of additional silicone dental impression materials as a "tooth shield" for the reduction of metal artifact caused by metal restorations and orthodontic appliances. 6 phantoms with 4 teeth were prepared for this in vitro study. Orthodontic bracket, bands and amalgam restorations were placed in each tooth to reproduce various intraoral conditions. Standardized silicone shields were fabricated and placed around the teeth. CT image acquisition was performed with and without silicone shields. Maximum value, mean, and standard deviation of Hounsfield Units (HU) were compared with the presence of silicone shields. In every situation, metal artifacts were reduced in quality and quantity when silicone shields are used. Amalgam restoration made most serious metal artifact. Silicone shields made by dental impression material might be effective way to reduce the metal artifact caused by dental restoration and orthodontic appliances. This will help more excellent 3D image from 3D CT in craniofacial area.

Removal of mercury from coal-combustion flue gas using regenerable sorbents

Energy Technology Data Exchange (ETDEWEB)

Turchi, C S; Albiston, J; Broderick, T E; Stewart, R M

1999-07-01

The US EPA estimates that coal-fired power plants constitute the largest anthropogenic source of mercury emissions in the US. The Agency has contemplated emission regulations for power plants, but the large gas-flow rates and low mercury concentrations involved have made current treatment options prohibitively expensive. ADA Technologies, Inc. (Englewood, Colorado), in conjunction with the US DOE, is developing regenerable sorbents for the removal and recovery of mercury from flue gas. These sorbents are based on the ability of noble metals to amalgamate mercury at typical flue-gas temperatures and release mercury at higher temperatures. The process allows for recovery of mercury with minimal volumes of secondary wastes and no impact on fly ash quality. In 1997 and 1998, ADA tested a 20-cfm sorbent unit at CONSOL Inc.'s coal-combustion test facility in Library, PA. Results from the 1997 tests indicated that the sorbent can remove elemental and oxidized mercury and can be regenerated without loss of capacity. Design changes were implemented in 1998 to enhance the thermal efficiency of the process and to recover the mercury in a stable form. Testing during autumn, 1998 demonstrated 60% to 90% removal efficiency of mercury from a variety of different coals. However, contradictory removal results were obtained at the end of the test period. Subsequent laboratory analyses indicated that the sorbent had lost over half its capacity for mercury due to a decrease in available sites for mercury sorption. The presence of sulfur compounds on the sorbent suggests that thermal cycling may have condensed acid gases on the sorbent leading to deterioration of the active sorption sites. The regeneration time/temperature profile has been altered to minimize this potential in the upcoming power plant tests.

Mercury interactions in a simulated gold platter

Energy Technology Data Exchange (ETDEWEB)

Miller, J.W. [University of North Carolina, Asheville, NC (United States). Dept. of Environmental Studies; Callahan, J.E. [Appalachian State Univ., Boone, NC (United States). Dept. of Geology; Craig, J.R. [Virginia Polytechnic Institute and State University, Blacksburg, VA (United States). Dept. of Geological Sciences

2002-07-01

substrate. This situation is analogous to Au placers in the North Carolina Piedmont (South Mountains, Robbins, and High Point), where Hg is not detected in stream water (<0.2 {mu}g/l) and Au grains possess amalgamated rims. Mercury concentrations in the air over the tank (41-465 ng/m{sup 3}) varied inversely with barometric pressure (1012-1033 mb @ SL), with a positive response to light, which is consistent with the work of other researchers. The positive photo effect on Hg concentration in the air was obvious at lower barometric pressures ({approx}ave. 1015 mb @ SL) but subdued or nonexistent at higher barometric pressures ({approx}ave 1025 mb @ SL). Mercury concentrations were as much as 3 times as high during daylight hours compared to nighttime concentrations over the tank at relatively low barometric pressures. The Hg content of the water remained relatively low (<1 {mu}g/l) through the first 200 days and then abruptly increased where it oscillated between 4 and 17 {mu}g/l to the end of the experiment (851 days). Meanwhile, the rate of loss of Hg from the tank averaged approximately 1 {mu}g/cm{sup 2} day with a high of 1.54 {mu}g/cm{sup 2} day. Apparently the release of Hg is little affected by the Hg content of the water, as long as a minimum amount of Hg is maintained in the water. The release rate of Hg from the tank experiment is approximately 10 times higher than those reported by other workers but probably represents a maximum due to ideal, oxidizing, high water flow conditions in the tank. (Author)

Speciation of mercury in soil and sediment by selective solvent and acid extraction

Energy Technology Data Exchange (ETDEWEB)

Han, Y. [Metara Inc., 1225 East Arques Ave, Sunnyvale, CA (United States); Kingston, H.M.; Boylan, H.M.; Rahman, G.M.M.; Shah, S.; Richter, R.C.; Link, D.D.; Bhandari, S. [Department of Chemistry and Biochemistry, Duquesne University, Pittsburgh, PA (United States)

2003-02-01

In order to characterize the mercury hazard in soil, a sequential extraction scheme has been developed to classify mercury species based on their environmental mobility and/or toxicity for either routine lab analysis or on-site screening purposes. The alkyl mercury species and soluble inorganic species that contribute to the major portion of potential mercury toxicity in the soil are extracted by an acidic ethanol solution (2% HCl+10% ethanol solution) from soil matrices as ''mobile and toxic'' species. A High-Performance Liquid Chromatography (HPLC) system coupled with Inductively Coupled Plasma Mass Spectrometry (ICP-MS) detection has been developed to further resolve the species information into soluble inorganic species (Hg{sup 2+}), methylmercury(II) (MeHg{sup +}) and ethylmercury(II) (EtHg{sup +}) species. Alternatively, these species can be separated into ''soluble inorganic mercury'' and ''alkyl mercury'' sub-categories by Solid-Phase Extraction (SPE). A custom Sulfydryl Cotton Fiber (SCF) material is used as the solid phase medium. Optimization of the SCF SPE technique is discussed. Combined with a direct mercury analyzer (DMA-80), the SCF SPE technique is a promising candidate for on-site screening purposes. Following the ethanol extraction, the inorganic mercury species remaining in soil are further divided into ''semi-mobile'' and ''non-mobile'' sub-categories by sequential acid extractions. The ''semi-mobile'' mercury species include mainly elemental mercury (Hg) and mercury-metal amalgams. The non-mobile mercury species mainly include mercuric sulfide (HgS) and mercurous chloride (Hg{sub 2}Cl{sub 2}). (orig.)

Sorption of zinc on human teeth

International Nuclear Information System (INIS)

Helal, A.; Amin, H.; Alian, G.

1997-01-01

Zinc containing dental amalgams are sometimes used as fillings by dentists. The freshly mixed mass of the amalgam alloy and liquid mercury packed or condensed into a prepared tooth cavity. Zinc has been included in amalgams alloys up to 2% as an aid in manufacturing by helping to produce clean sound castings of the ingots. Although such restorations have a relatively long service life, they are subject to corrosion and galvanic action, thus releasing metallic products into the oral environment. The aim of this paper is to investigate the uptake (sorption) of Zinc ionic species on human teeth using the radioactive tracer technique. For this purpose the isotope Zn-65 produced from pile-irradiation of zinc metal was used. The various liquids studied were drinking water (tap water), tea, coffee, red tea and chicken soup. Sorption was studied through immersion of a single human tooth (extracted) in each of these liquids

Seasonal variations of ambient air mercury species nearby an airport

Science.gov (United States)

Fang, Guor-Cheng; Tsai, Kai-Hsiang; Huang, Chao-Yang; Yang, Kuang-Pu Ou; Xiao, You-Fu; Huang, Wen-Chuan; Zhuang, Yuan-Jie

2018-04-01

This study focuses on the collection of ambient air mercury species (total gaseous mercury (TGM), reactive gaseous mercury (RGM), gaseous element mercury (GEM) and particulate bound mercury (PBM) pollutants at airport nearby sampling site during the year of Apr. 2016 to Mar. 2017 by using Four-stage gold amalgamation and denuder. The results indicated that the average TGM, RGM and GEM concentrations were 5.04 ± 2.43 ng/m3, 29.58 ± 80.54 pg/m3, 4.70 ± 2.63 ng/m3, respectively during the year of Apr. 2016 to Mar. 2017 (n = 49) period at this airport sampling site nearby. In addition, the results also indicated that the average PBM concentrations in TSP and PM2.5 were 0.35 ± 0.08 ng/m3 and 0.09 ± 0.03 ng/m3, respectively. And the average PBM in TSP concentrations order follows as summer > autumn > spring > winter, while the average PBM in PM2.5 concentrations order follows as spring > summer > winter > autumn. Moreover, the average TGM, RGM and GEM concentrations order follow as spring > summer > autumn > winter. Finally, the Asian continent has the highest average mercury species concentrations (TGM, RGM, GEM and PBM) when compared with the American and European continents, and the average mercury species concentrations (TGM, RGM, GEM and PBM) displayed declined trends for North America (United States and Canada) and Europe (Spain, Sweden and Southern Baltic) during the years of 2004-2014. Also noteworthy is that the average mercury species concentrations (TGM, RGM, GEM) displayed increasing trends in China and Taiwan during the years of 2008-2016. Japan and Korea are the only two exceptions. Those above two countries mercury species concentrations displayed decreasing trends during years of 2008-2015.

Determination of total mercury in fillets of sport fishes collected from Folsom and New Melones Reservoirs, California, 2004

Science.gov (United States)

May, Thomas W.; Brumbaugh, William G.

2007-01-01

This report presents the results of a study by the U.S. Geological Survey, done in cooperation with the U.S. Bureau of Reclamation, to determine mercury concentrations in selected sport fishes from Folsom and New Melones Reservoirs in California. Fillets were collected from each fish sample, and after homogenization and lyophilization of fish fillets, mercury concentrations were determined with a direct mercury analyzer utilizing the process of thermal combustion-gold amalgamation atomic absorption spectroscopy. Mercury concentrations in fish fillets from Folsom Reservoir ranged from 0.09 to 1.16 micrograms per gram wet weight, and from New Melones Reservoir ranged from 0.03 to 0.94 microgram per gram wet weight. Most of the fish fillets from Folsom Reservoir (87 percent) and 27 percent of the fillets from New Melones Reservoir exceeded the U.S. Environmental Protection Agency's fish consumption advisory of 0.30 microgram per gram wet weight.

Assessment of mercury exposure among small-scale gold miners using mercury stable isotopes

International Nuclear Information System (INIS)

Sherman, Laura S.; Blum, Joel D.; Basu, Niladri; Rajaee, Mozhgon; Evers, David C.; Buck, David G.; Petrlik, Jindrich; DiGangi, Joseph

2015-01-01

Total mercury (Hg) concentrations in hair and urine are often used as biomarkers of exposure to fish-derived methylmercury (MeHg) and gaseous elemental Hg, respectively. We used Hg stable isotopes to assess the validity of these biomarkers among small-scale gold mining populations in Ghana and Indonesia. Urine from Ghanaian miners displayed similar Δ 199 Hg values to Hg derived from ore deposits (mean urine Δ 199 Hg=0.01‰, n=6). This suggests that urine total Hg concentrations accurately reflect exposure to inorganic Hg among this population. Hair samples from Ghanaian miners displayed low positive Δ 199 Hg values (0.23–0.55‰, n=6) and low percentages of total Hg as MeHg (7.6–29%, n=7). These data suggest that the majority of the Hg in these miners' hair samples is exogenously adsorbed inorganic Hg and not fish-derived MeHg. Hair samples from Indonesian gold miners who eat fish daily displayed a wider range of positive Δ 199 Hg values (0.21–1.32‰, n=5) and percentages of total Hg as MeHg (32–72%, n=4). This suggests that total Hg in the hair samples from Indonesian gold miners is likely a mixture of ingested fish MeHg and exogenously adsorbed inorganic Hg. Based on data from both populations, we suggest that total Hg concentrations in hair samples from small-scale gold miners likely overestimate exposure to MeHg from fish consumption. - Highlights: • Mercury isotopes were measured in hair and urine from small-scale gold miners. • Mercury isotopes indicate that Hg in urine comes from mining activity. • Mercury isotopes suggest Hg in hair is a mixture of fish MeHg and inorganic Hg. • A large percentage of Hg in miner’s hair is released during amalgam burning and adsorbed

Mercury Production and Use in Colonial Andean Silver Production: Emissions and Health Implications

Science.gov (United States)

Hagan, Nicole A.

2012-01-01

Background: Colonial cinnabar mining and refining began in Huancavelica, Peru, in 1564. With a local source of mercury, the amalgamation process was adopted to refine silver in Potosí, Bolivia, in the early 1570s. As a result, large quantities of mercury were released into the environment. Objectives: We used archival, primary, and secondary sources to develop the first estimate of mercury emissions from cinnabar refining in Huancavelica and to revise previous estimates of emissions from silver refining in Potosí during the colonial period (1564–1810). Discussion: Although other estimates of historical mercury emissions have recognized Potosí as a significant source, Huancavelica has been overlooked. In addition, previous estimates of mercury emissions from silver refining under-estimated emissions because of unrecorded (contra-band) production and volatilization of mercury during processing and recovery. Archival descriptions document behavioral and health issues during the colonial period that are consistent with known effects of mercury intoxication. Conclusions: According to our calculations, between 1564 and 1810, an estimated 17,000 metric tons of mercury vapor were emitted from cinnabar smelting in Huancavelica, and an estimated 39,000 metric tons were released as vapor during silver refining operations in Potosí. Huancavelica and Potosí combined contributed > 25% of the 196,000 metric tons of mercury vapor emissions in all of Latin America between 1500 and 1800. The historical record is laden with evidence of mercury intoxication consistent with effects recognized today. Our estimates serve as the foundation of investigations of present-day contamination in Huancavelica and Potosí resulting from historical emissions of mercury. PMID:22334094

Assessment of health risk of exposure to mercury through intake under canned tuna in health registration process period January 2010-December 2011

International Nuclear Information System (INIS)

Carrillo, M.; Tovar, M.; Alvarez, J.; Arraez, M.; Hordziejewicz, I.; Loreto, I.

2013-01-01

The power point presentation is about: Assessing the health risk due to exposure to mercury through ingestion canned tuna under sanitary registration process in the country, using the risk assessment tool recommended by the Codex Alimentarius establishing safety according to the use of local diets. The analytical method appied was Atomic Absorption Spectrophotometry Amalgamation (SS TDA AS). As a recommendation was important to maintain an ongoing program of monitoring of mercury in tuna as being a highly recommended food as being excellent source of protein and fatty acids beneficial to health can also be a source of mercury poisoning in cases of people who have a high consumption thereof in the diet

[Comparative study of the fracture resistance of sound upper premolars and upper premolars restored with bonded amalgam].

Science.gov (United States)

Minto, André Marcelo Peruchi; Dinelli, Welingtom; Nonaka, Tomio; Thome, Luis Henrique de Camargo

2002-01-01

The purpose of this in vitro study was to determine the fracture resistance of upper premolars which had received class II preparations (conservative and extensive) and were restored with bonded amalgam, with two different adhesive systems. Seventy teeth were divided in four groups: group 1 (control), with ten sound teeth; group 2, with twenty prepared teeth (10 teeth received conservative cavities and 10, extensive cavities) restored with amalgam without any kind of liner; groups 3 and 4, similar to group 2, though with linings of glass ionomer cement (Vitrebond - 3M) (group 3) and dental adhesive (Scotchbond Multi-Purpose Plus - 3M) (group 4). The teeth were previously fixed in PVC cylinders with acrylic resin. After being restored and thermocycled, the test specimens were submitted to fracture by means of compression in an EMIC-MEM 2000 universal testing machine. After the application of the analysis of variance and complementary Tukey's test, we concluded that the utilized adhesive systems produced an increase of the fracture resistance of teeth presenting with conventional cavities; the teeth presenting with conservative cavities were more resistant in all experimental situations.

Improving awareness of mercury pollution in small-scale gold mining communities: challenges and ways forward in rural Ghana.

Science.gov (United States)

Hilson, Gavin; Hilson, Christopher J; Pardie, Sandra

2007-02-01

This paper critiques the approach taken by the Ghanaian Government to address mercury pollution in the artisanal and small-scale gold mining sector. Unmonitored releases of mercury-used in the gold-amalgamation process-have caused numerous environmental complications throughout rural Ghana. Certain policy, technological and educational initiatives taken to address the mounting problem, however, have proved marginally effective at best, having been designed and implemented without careful analysis of mine community dynamics, the organization of activities, operators' needs and local geological conditions. Marked improvements can only be achieved in this area through increased government-initiated dialogue with the now-ostracized illegal galamsey mining community; introducing simple, cost-effective techniques for the reduction of mercury emissions; and effecting government-sponsored participatory training exercises as mediums for communicating information about appropriate technologies and the environment.

Influence of metal dental materials on MR imaging

Energy Technology Data Exchange (ETDEWEB)

Tsuchihashi, Toshio; Chiba, Michiko; Yoshizawa, Satoshi; Sasaki, Sadayuki; Maki, Toshio; Kitagawa, Matsuo; Suzuki, Takeshi [Nippon Medical School, Tokyo (Japan). Main Hospital; Nakata, Minoru; Fujita, Isao

1998-11-01

Differences in magnetic susceptibility produce artifacts and signal loss in magnetic resonance imaging (MRI). This study was undertaken to compare the degree of artifacts on MRI caused by metallic dental materials. The influence on MRI of six types of dental alloys, a dental implant, orthodontic appliance, and magnetic attachment was investigated. Among the dental metals, nickel-chromium alloy and cobalt-chromium alloy, which have ferromagnetism, caused significant metal artifacts. Gold-platinum alloy, gold-silver-palladium alloy, silver alloy, and amalgam alloy produced slight metal artifacts. The orthodontic appliance mainly consisted of iron, and the keeper for its magnetic attachment was made of stainless steel. For these reasons, marked metal artifacts and signal loss could be seen in both of them owing to their ferromagnetism. These results suggest that orthodontic appliances and magnetic attachments impair evaluation of the GRE and EPI techniques. It is therefore preferable to use predominantly diamagnetic or paramagnetic dental materials for MRI of the head and neck. Removable keepers should be used more widely to prevent metal artifacts and enhance safety on MRI. (author)

Influence of metal dental materials on MR imaging

International Nuclear Information System (INIS)

Tsuchihashi, Toshio; Chiba, Michiko; Yoshizawa, Satoshi; Sasaki, Sadayuki; Maki, Toshio; Kitagawa, Matsuo; Suzuki, Takeshi; Nakata, Minoru; Fujita, Isao

1998-01-01

Differences in magnetic susceptibility produce artifacts and signal loss in magnetic resonance imaging (MRI). This study was undertaken to compare the degree of artifacts on MRI caused by metallic dental materials. The influence on MRI of six types of dental alloys, a dental implant, orthodontic appliance, and magnetic attachment was investigated. Among the dental metals, nickel-chromium alloy and cobalt-chromium alloy, which have ferromagnetism, caused significant metal artifacts. Gold-platinum alloy, gold-silver-palladium alloy, silver alloy, and amalgam alloy produced slight metal artifacts. The orthodontic appliance mainly consisted of iron, and the keeper for its magnetic attachment was made of stainless steel. For these reasons, marked metal artifacts and signal loss could be seen in both of them owing to their ferromagnetism. These results suggest that orthodontic appliances and magnetic attachments impair evaluation of the GRE and EPI techniques. It is therefore preferable to use predominantly diamagnetic or paramagnetic dental materials for MRI of the head and neck. Removable keepers should be used more widely to prevent metal artifacts and enhance safety on MRI. (author)

Voltammetric Determination of Genotoxic Nitro Derivatives of Fluorene and 9-Fluorenone Using a Mercury Meniscus Modified Silver Solid Amalgam Electrode

Czech Academy of Sciences Publication Activity Database

Vyskočil, V.; Navrátil, Tomáš; Polášková, P.; Barek, J.

2010-01-01

Roč. 22, 17-18 (2010), s. 2034-2042 ISSN 1040-0397. [International Conference on Modern Electroanalytical Methods. Prague, 09.12.2009-14.12.2009] R&D Projects: GA AV ČR IAA400400806 Institutional research plan: CEZ:AV0Z40400503 Keywords : voltammetry * Silver solid amalgam electrode * drinking water Subject RIV: CG - Electrochemistry Impact factor: 2.721, year: 2010

Integrated criteria document mercury

International Nuclear Information System (INIS)

Sloof, W.; Beelan, P. van; Annema, J.A.; Janus, J.A.

1995-01-01

The document contains a systematic review and a critical evaluation of the most relevant data on the priority substance mercury for the purpose of effect-oriented environmental policy. Chapter headings are: properties and existing standards; production, application, sources and emissions (natural sources, industry, energy, households, agriculture, dental use, waste); distribution and transformation (cinnabar; Hg 2+ , Hg 2 2+ , elemental mercury, methylmercury, behavior in soil, water, air, biota); concentrations and fluxes in the environment and exposure levels (sampling and measuring methods, occurrence in soil, water, air etc.); effects (toxicity to humans and aquatic and terrestrial systems); emissions reduction (from industrial sources, energy, waste processing etc.); and evaluation (risks, standards, emission reduction objectives, measuring strategies). 395 refs

Amalgam shear bond strength to dentin using different bonding agents.

Science.gov (United States)

Vargas, M A; Denehy, G E; Ratananakin, T

1994-01-01

This study evaluated the shear bond strength of amalgam to dentin using five different bonding agents: Amalgambond Plus, Optibond, Imperva Dual, All-Bond 2, and Clearfil Liner Bond. Flat dentin surfaces obtained by grinding the occlusal portion of 50 human third molars were used for this study. To contain the amalgam on the tooth surface, cylindrical plastic molds were placed on the dentin and secured with sticky wax. The bonding agents were then applied according to the manufacturers' instructions or light activated and Tytin amalgam was condensed into the plastic molds. The samples were thermocycled and shear bond strengths were determined using an Instron Universal Testing Machine. Analysis by one-way ANOVA indicated significant difference between the five groups (P < 0.05). The bond strength of amalgam to dentin was significantly higher with Amalgambond Plus using the High-Performance Additive than with the other four bonding agents.

Rank gradient and p-gradient of amalgamated free products and HNN extensions

OpenAIRE

Pappas, Nathaniel

2013-01-01

We calculate the rank gradient and p-gradient of free products, free products with amalgamation over an amenable subgroup, and HNN extensions with an amenable associated subgroup. The notion of cost is used to compute the rank gradient of amalgamated free products and HNN extensions. For the p-gradient the Kurosh subgroup theorems for amalgamated free products and HNN extensions will be used.

Nike (Awaous melanocephalus) Fishery and Mercury Contamination in the Estuary of BoneBolango River

OpenAIRE

Aziz Salam; Femy M Sahami; Citra Panigoro

2016-01-01

Nike fish (Awaous melanocephalus) is a tiny-kind of fish harvested lunar-monthly in the estuary of BoneBolango River in the City of Gorontalo. The fishing activity is showing steady increase recently as the commodity finds its way to the international market. Fishermen are putting more efforts by escalating the catching capacity of their gears. Meanwhile, mercury used by the artisanal and small-scale gold mining (ASGM) in the headwaters for amalgamation put another aspect to the A...

[Creep of amalgam fillings under clasp rests].

Science.gov (United States)

Borchers, L; Jung, T; West, M

1989-10-01

A clinically realistic experiment was set up to obtain information on the amount of vertical settling of clasp rests in amalgam restorations under functional loading. Mesioocclusal cavities were prepared in 16 lower molar specimens cast in brass. The cavities were filled with amalgam and provided with a mesial rest seat. A constant load of 100 N was applied via a simplified (experimental) saddle to a cobalt-chromium E-clasp cast to the saddle. The duration of the load corresponded to 160 days of clinical function. The chronological course of vertical displacement was analyzed mathematically. According to this result the process can be divided into three components: settling immediately upon load initiation (mean value 96 microns, transition creep (mean value 25 microns) and creep ata constant rate (mean value 15 microns). The mean overall vertical displacement of the rests was 136 microns, the maximum value 287 microns. These findings suggest that vertical settling of a clasp rest into its seat in an amalgam restoration may eventually result in significant changes in occlusion and may almost completely exhaust gingival resilience.

State-of-the-art techniques in operative dentistry: contemporary teaching of posterior composites in UK and Irish dental schools.

LENUS (Irish Health Repository)

Lynch, C D

2010-08-14

Advances of composite systems and their application have revolutionised the management of posterior teeth affected by caries, facilitating a minimally invasive approach. Previous surveys have indicated that the teaching of posterior composites within dental schools was developing, albeit not keeping pace with clinical evidence and the development of increasingly predictable techniques and materials. Concurrently, surveys of dental practice indicate that dental amalgam still predominates as the \\'material of choice\\' for the restoration of posterior teeth within UK general dental practice. In light of such considerations, the aim of this study was to investigate current teaching of posterior composites in Irish and UK dental schools.

Effectiveness of school dental screening on stimulating dental attendance rates in Vikarabad town: A randomized controlled trial

Directory of Open Access Journals (Sweden)

Gadde Praveen

2014-01-01

Full Text Available Background: The school dental screening program has been in existence from the beginning of 20 th century. Its value in encouraging attendance among school children is not fully established. Aim: The aim was to determine the effectiveness of school dental screening on stimulating dental attendance rates among school children in Vikarabad town. Objectives: (a To compare the dental attendance rates between 6-9 and 10-13 years old age groups, among male and female school children in Vikarabad town. (b To identify the type of dental treatment received by the school children. Materials and Methods: A randomized controlled trial was conducted among school children aged 6-13 years old from 16 schools that were randomly selected and divided into two groups. Eight schools had a dental screening program (study group = 300 children and had blanket referral cards and 8 schools that did not have the intervention (control group = 300. The dental attendance rates were determined after 3 months of follow-up period by evaluating the blanket referral cards for the study group and by an oral questionnaire for the control group. Results: The dental attendance rate was 27% for the study group and 18% for the control group which is statistically significant. The attendance rate was higher among 10-13 years of children both in test group and control groups. Among the children who visited the dentist, 53% in the control group and 69% from the test group got simple amalgam and glass ionomer cement restorations. Conclusion: The dental attendance rates were improved following school dental screening.

Amalgam bonding: visualization and clinical implications of adhesive displacement during amalgam condensation.

Science.gov (United States)

Tyler, D W; Thurmeier, J

2001-01-01

Resin adhesive was visualized in this in vitro study of amalgam bonding using methylene blue dye incorporated into the resin or by scanning electron microscopy. Class II amalgam cavities were prepared in extracted teeth previously stored in buffered formalin. The preparations were then restored following manufacturers' instructions, but included methylene blue dissolved in ethanol into the adhesive resin mixture. This procedure had little effect on the setting time of the resin. Following condensation and carving, excess resin was incorporated into the body of the restorations as well as onto all adjacent coronal surfaces with significant occlusal and proximal accumulations. Resin also accumulated in significant amounts on the gingival floor of the proximal box and at line angles and retentive grooves within the preparation. In conclusion, radiological studies demonstrated that artifacts produced by resin accumulation at the gingival floor of the box could be mistaken for an open margin or recurrent caries. Other potential clinical consequences of resin residue on tooth surfaces are discussed, including the problem of interproximal ledges and occlusal discrepancies. The incorporation of a radiopaque material in the resin systems should be a universal requirement.

New processes for the reduction and capture of mercury emissions in the exhaust gas treatment; Neue Verfahren zur Minderung und Erfassung von Quecksilber-Emissionen in der Abgasbehandlung

Energy Technology Data Exchange (ETDEWEB)

Boness, Michael [Sick Maihak GmbH, Meersburg (Germany); Kanefke, Rico [Currenta GmbH und Co. OHG, Leverkusen (Germany). Sonderabfallverbrennung Leverkusen; Vosteen, Bernhard W. [Vosteen Consulting GmbH, Koeln (Germany)

2013-03-01

The highly volatile heavy metal mercury is deemed to be very toxic. There exist a lot of natural as well as anthropogenic sources for the pollution of the environment with mercury such as the coal-fired power generation, the electrolytic production of chlorine, the cement burning including the release of mercury from the cement raw meal, the waste incineration and the artisanal production of gold by amalgamation with liquid mercury. The authors of the contribution under consideration report on new procedures for the reduction and capture of mercury emissions in the exhaust gas treatment. The bromine supported precipitation of mercury in the exhaust gas treatment is an efficient and economic process which takes account of the future requirements of lower limit values for mercury. Simultaneously, a new measurement technique for a continuous capture of mercury with new standards on detection sensitivity, accuracy and reliability in connection with a more simple and cost-effective maintenance is developed. The bromine supported precipitation as well as the continuous capture of mercury are trendsetters and are actually the best available technologies for the reduction of mercury emissions.

Potentiometric stripping analysis of lead and cadmium leaching from dental prosthetic materials and teeth

Directory of Open Access Journals (Sweden)

GORAN M. NIKOLIC

2004-07-01

Full Text Available Potentiometric stipping analysis (PSA was applied for the determination of lead and cadmium leaching from dental prosthetic materials and teeth. The soluble lead content in finished dental implants was found to be much lower than that of the individual components used for their preparation. Cadmium was not detected in dental implants and materials under the defined conditions. The soluble lead and cadmium content of teeth was slightly lower than the lead and cadmium content in whole teeth (w/w reported by other researchers, except in the case of a tooth with removed amalgam filling. The results of this work suggest that PSA may be a good method for lead and cadmium leaching studies for investigation of the biocompatibility of dental prosthetic materials.

A comparison of glass cermet cement and amalgam restorations in primary molars.

Science.gov (United States)

Hickel, R; Voss, A

1990-01-01

The aim of this clinical study was to compare the efficacy of GCC with amalgam as a filling material in primary molars. Two hundred fifteen restorations were placed in the first and second primary molars of seventy-four patients, ranging in age from four to ten years. The overall failure rate of amalgam is lower than that of GCC, but not significantly different. In older children, amalgam has greater advantages. An advantage of GCC is the short time required to fill the cavity. This might be an important factor in young and/or difficult children. In these cases amalgam cannot be placed under optimal conditions and, therefore, the results are less satisfactory. GCC is a viable alternative filling material.

Kinetic study of lithium-cadmium ternary amalgam decomposition

International Nuclear Information System (INIS)

Cordova, M.H.; Andrade, C.E.

1992-01-01

The effect of metals, which form stable lithium phase in binary alloys, on the formation of intermetallic species in ternary amalgams and their effect on thermal decomposition in contact with water is analyzed. Cd is selected as ternary metal, based on general experimental selection criteria. Cd (Hg) binary amalgams are prepared by direct contact Cd-Hg, whereas Li is formed by electrolysis of Li OH aq using a liquid Cd (Hg) cathodic well. The decomposition kinetic of Li C(Hg) in contact with 0.6 M Li OH is studied in function of ageing and temperature, and these results are compared with the binary amalgam Li (Hg) decomposition. The decomposition rate is constant during one hour for binary and ternary systems. Ageing does not affect the binary systems but increases the decomposition activation energy of ternary systems. A reaction mechanism that considers an intermetallic specie participating in the activated complex is proposed and a kinetic law is suggested. (author)

Selection of mercury accumulator plants for gold mine tailing contaminated soils

Directory of Open Access Journals (Sweden)

N Muddarisna

2015-04-01

Full Text Available Phytoremediation, which is more efficient with less side effects than conventional physical and chemical methods, is increasing in popularity as a remediation system. This paper provides a brief overview of developments in research and application of phytoremediation of soil contaminated with gold mine tailings containing mercury. Lindernia crustacea L., Digitaria radicosa Presl. Miq., Zingiber purpurium L, Paspalum conjugatum Berg., Cyperus kyllingia Endl., and Caladium bicolor Vent., that were selected for this study were planted in the planting media consisting of soil (70% and tailings (30% for 9 weeks. The results showed that after 9 weeks of planting, Paspalum conjugatum had growth rate, biomass production, Hg accumulation, and ratio of shoot Hg : root Hg higher than those of other plant species tested, both in the media consisted of amalgamation and cyanidation tailings. It can thus be concluded that Paspalum conjugatum is potential plant species for remediating mercury-contaminated soil.

Development and Applications of Fluorogenic Probes for Mercury(II) Based on Vinyl Ether Oxymercuration

OpenAIRE

Ando, Shin; Koide, Kazunori

2011-01-01

Mercury is a major threat to the environment and to human health. It is highly desirable to develop a user-friendly kit for on-site mercury detection. Such a method must be able to detect mercury below the threshold levels for drinking water, 1–2 ppb. We developed a fluorescence method based on the oxymercuration of vinyl ethers to detect mercury in dental and environmental samples. Chloride ions interfered with the oxymercuration reaction, but the addition of AgNO3 solved this problem. Fine ...

Methyl Mercury Production In Tropical Hydromorphic Soils: Impact Of Gold Mining.

Science.gov (United States)

Guedron, S.; Charlet, L.; Harris, J.; Grimaldi, M.; Cossa, D.

2007-12-01

Artisanal alluvial gold mining is important in many tropical developing countries and several million people are involved worldwide. The dominant use of mercury for gold amalgamation in this activity leads to mercury accumulation in soils, to sediment contamination and to methyl mercury (MMHg) bioaccumulation along the food chain. In this presentation we will present recent data on methyl mercury production in hydromorphic soils and tailing ponds from a former gold mining area located in French Guiana (South America). Comparison of specific fluxes between a pristine sub watershed and the contaminated watershed shows that former mining activities lead to a large enhancement of dissolved and particulate MMHg emissions at least by a factor of 4 and 6, respectively. MMHg production was identified in sediments from tailing ponds and in surrounding hydromorphic soils. Moreover, interstitial soil water and tailing pond water profiles sampled in an experimental tailing pond demonstrate the presence of a large MMHg production in the suboxic areas. Both tailing ponds and hydromorphic soils present geochemical conditions that are favorable to bacterial mercury methylation (high soil Hg content, high aqueous ferric iron and dissolved organic carbon concentrations). Although sulfate-reducing bacteria have been described as being the principal mercury methylating bacteria, the positive correlation between dissolved MMHg and ferrous iron concentrations argue for a significant role of iron-reducing bacteria. Identifications by sequencing fragments of 16S rRNA from total soil DNA support these interpretations. This study demonstrates that current and past artisanal gold mining in the tropics lead to methyl mercury production in contaminated areas. As artisanal activities are increasing with increasing gold prices, the bio- magnification of methyl mercury in fish presents an increasing threat to local populations whose diet relies on fish consumption.

Surface modification for bonding between amalgam and orthodontic brackets.

Science.gov (United States)

Wongsamut, Wittawat; Satrawaha, Sirichom; Wayakanon, Kornchanok

2017-01-01

Testing of methods to enhance the shear bond strength (SBS) between orthodontic metal brackets and amalgam by sandblasting and different primers. Three hundred samples of amalgam restorations (KerrAlloy ® ) were prepared in self-cured acrylic blocks, polished, and divided into two groups: nonsandblasted and sandblasted. Each group was divided into five subgroups with different primers used in surface treatment methods, with a control group of bonded brackets on human mandibular incisors. Following the surface treatments, mandibular incisor brackets (Unitek ® ) were bonded on the amalgam with adhesive resin (Transbond XT ® ). The SBS of the samples was tested. The adhesive remnant index (ARI) and failure modes were then determined under a stereo-microscope. Two-way analysis of variance, Chi-square, and Kruskal-Wallis tests were performed to calculate the correlations between and among the SBS and ARI values, the failure modes, and surface roughness results. There were statistically significant differences of SBS among the different adhesive primers and sandblasting methods ( P 0.05). Using adhesive primers with sandblasting together effectively enhances the SBS between orthodontic metal brackets and amalgam. The two primers with the ingredient methacryloxydecyl dihydrogen phosphate (MDP) monomer, Alloy Primer ® and Assure Plus ® , were the most effective. Including sandblasting in the treatment is essential to achieve the bonding strength required.

Comparison of shear bond strength of amalgam bonded to primary and permanent dentin

Directory of Open Access Journals (Sweden)

Mahdi S

2008-06-01

Full Text Available Amalgam′s non-adhesive characteristics necessitate cavity preparations incorporating retentive features, which often require the removal of non-carious tooth structure. Use of adhesives beneath amalgam restorations, would be helpful to overcome this disadvantage. This study was undertaken to compare the mean shear bond strength of amalgam bonded to primary and permanent dentin, to evaluate the efficacy of amalgam adhesives in pediatric dentistry.27 primary and 28 permanent posterior teeth with intact buccal or lingual surfaces were grounded to expose dentin and wet-polished with 400-grit silicone carbide paper. Scotchbond Multi Purpose Plus adhesive system was applied to the dentin surfaces and light cured. Amalgam was condensed onto the treated dentin through a plastic mold.shear bond strength testing was done using an Instron Universal testing machine, at a crosshead speed of 0.5 mm/min.The data were analyzed by independent samples t-test The difference among the two groups was not statistically significant (p>0.05 Bonded amalgam showed the same level of bond strength to primary and permanent dentin; so, application of amalgam bonding agents in pediatric dentistry can be recommended.

Abatement of mercury pollution in the small-scale gold mining industry: restructuring the policy and research agendas.

Science.gov (United States)

Hilson, Gavin

2006-06-01

This paper critiques contemporary research and policy approaches taken toward the analysis and abatement of mercury pollution in the small-scale gold mining sector. Unmonitored releases of mercury from gold amalgamation have caused considerable environmental contamination and human health complications in rural reaches of sub-Saharan Africa, Latin America and Asia. Whilst these problems have caught the attention of the scientific community over the past 15-20 years, the research that has since been undertaken has failed to identify appropriate mitigation measures, and has done little to advance understanding of why contamination persists. Moreover, the strategies used to educate operators about the impacts of acute mercury exposure, and the technologies implemented to prevent further pollution, have been marginally effective at best. The mercury pollution problem will not be resolved until governments and donor agencies commit to carrying out research aimed at improving understanding of the dynamics of small scale gold mining communities. Acquisition of this knowledge is the key to designing and implementing appropriate support and abatement measures.

Instrumental analysis for mercury in thumbnails of human subjects

Energy Technology Data Exchange (ETDEWEB)

Kanabrocki, E L; Kanabrocki, J A; Greco, J [Veterans Administration Hospital, Hines, Ill. (USA)

1977-07-01

Mercury levels in thumbnails were determined by instrumental analysis using thermal neutron activation technique. Samples were obtained from 14 subjects employed in the hospital dental service (a), 19 in the clinical laboratories (b), and from 16 hospitalized patients who were not employed in laboratory occupations (c). The average mercury levels in ppM for the respective groups were: (a) dentists, 2.7; technicians, 3.9; assistants, 6.6; (b) male technicians, 0.4; female technicians, 1.9; (c) patients, 0.3.

Assessment of mercury exposure among small-scale gold miners using mercury stable isotopes

Energy Technology Data Exchange (ETDEWEB)

Sherman, Laura S., E-mail: lsaylors@umich.edu [University of Michigan, Department of Earth and Environmental Sciences, 1100 North University Avenue, Ann Arbor, MI 48109 (United States); Blum, Joel D. [University of Michigan, Department of Earth and Environmental Sciences, 1100 North University Avenue, Ann Arbor, MI 48109 (United States); Basu, Niladri [McGill University, Faculty of Agricultural and Environmental Sciences, 21,111 Lakeshore Road, Ste. Anne de Bellevue, Quebec, Canada H9X3V9 (Canada); Rajaee, Mozhgon [University of Michigan, Department of Environmental Health Sciences, 1415 Washington Heights, Ann Arbor, MI 48109 (United States); Evers, David C.; Buck, David G. [Biodiversity Research Institute, 19 Flaggy Meadow Road, Gorham, ME 04038 (United States); Petrlik, Jindrich [Arnika Association, Chlumova 17, Prague 3 (Czech Republic); DiGangi, Joseph [IPEN, Box 7256, SE-402 35 Gothenburg (Sweden)

2015-02-15

Total mercury (Hg) concentrations in hair and urine are often used as biomarkers of exposure to fish-derived methylmercury (MeHg) and gaseous elemental Hg, respectively. We used Hg stable isotopes to assess the validity of these biomarkers among small-scale gold mining populations in Ghana and Indonesia. Urine from Ghanaian miners displayed similar Δ{sup 199}Hg values to Hg derived from ore deposits (mean urine Δ{sup 199}Hg=0.01‰, n=6). This suggests that urine total Hg concentrations accurately reflect exposure to inorganic Hg among this population. Hair samples from Ghanaian miners displayed low positive Δ{sup 199}Hg values (0.23–0.55‰, n=6) and low percentages of total Hg as MeHg (7.6–29%, n=7). These data suggest that the majority of the Hg in these miners' hair samples is exogenously adsorbed inorganic Hg and not fish-derived MeHg. Hair samples from Indonesian gold miners who eat fish daily displayed a wider range of positive Δ{sup 199}Hg values (0.21–1.32‰, n=5) and percentages of total Hg as MeHg (32–72%, n=4). This suggests that total Hg in the hair samples from Indonesian gold miners is likely a mixture of ingested fish MeHg and exogenously adsorbed inorganic Hg. Based on data from both populations, we suggest that total Hg concentrations in hair samples from small-scale gold miners likely overestimate exposure to MeHg from fish consumption. - Highlights: • Mercury isotopes were measured in hair and urine from small-scale gold miners. • Mercury isotopes indicate that Hg in urine comes from mining activity. • Mercury isotopes suggest Hg in hair is a mixture of fish MeHg and inorganic Hg. • A large percentage of Hg in miner’s hair is released during amalgam burning and adsorbed.

Radiopaque zones in the dentin beneath amalgam restorations

International Nuclear Information System (INIS)

You, Young Jun; Ahn, Hyung Kyu

1978-01-01

The purpose of the present investigation is determine how frequently radiopaque zones are seen on standard intraoral film and to research some other things about radiopaque bones. This study obtained the following results: 1. According to the standard intraoral films of the charts that were kept at the Dept. of Oral Diagnosis in Seoul National University Hospital, radiopaque zones were found in the rate of 4.1% among 1150 cases of amalgam-restored teeth that were treated at least two years ago. 2. Out of teeth that possessed radiopaque zones, 38.3% had radiolucent area between amalgam restoration and radiopaque zone. 3. Out of teeth that possessed radiopaque zones, 36.2% had cement base between amalgam restoration and radiopaque zone. 4. Out of teeth that possessed radiopaque zones, no tooth had periapical radiolucency. 5. Radiopaque zones were found more frequently in the mandibular teeth than the maxillary teeth. 6. According to the result of direct x-ray taking of 50 teeth that were treated at least 2 years ago, 6% had radiopaque zone.

Occlusal glass ionomer cermet, resin sandwich and amalgam restorations: a 2-year clinical study.

Science.gov (United States)

Lidums, A; Wilkie, R; Smales, R

1993-08-01

This study compared the clinical behavior of a glass ionomer silver cermet (Ketac-Silver), a posterior resin composite (Visio-Molar) used with the "sandwich" technique, and a high-copper amalgam (Dispersalloy) for restoring conventional Class I occlusal cavity preparations. Two dentists placed 116 restorations in the posterior permanent teeth of 35 adults treated at a dental hospital. Restorations were assessed at 6-month intervals over 2 years for bulk loss of material and occlusal wear, surface voids, roughness and cracking, surface and marginal staining, and marginal fracture. Losses of material and surface voids were obvious with the cermet material, with surface crazing or cracking being present in 33% of the restorations. The cermet cannot be recommended as a long-term permanent restorative material if the restorations are likely to be subjected to heavy occlusal stresses and abrasive wear.

The influence of economic incentives on treatment patterns in a third-party funded dental service.

LENUS (Irish Health Repository)

Woods, N

2010-03-01

OBJECTIVE: To investigate the response of dental practitioners to administration and remuneration adjustments to the Dental Treatment Services Scheme (DTSS) in the Republic of Ireland. DESIGN: Following the introduction of a series of administration and fee adjustments by a third party payments system in December 1999 the pattern of extractions and restorations are examined to determine whether the adjustments had influenced provider behaviour, in particular whether a substitution effect from extractions to restorations would result from a relative fee increase of 62% for amalgam fillings. DATA AND METHODS: Data on patient and provider characteristics from June 1996 to April 2005, collected by the Health Service Executive (HSE) National Shared Services Primary Care Reimbursement Service to facilitate remuneration to dentists providing services in the DTSS, was used in this analysis. A graphical analysis of the data revealed a structural break in the time-series and an apparent substitution to amalgam fillings following the introduction of the fee increases. To test the statistical significance of this break, the ratio of amalgams to restorations was regressed on the trend, growth and level dummy variables, using Ordinary Least Squares (OLS) regression. The diagnostics of the model were assessed using the Jarque-Bera normality test and the LM to test for serial correlation. RESULTS: The initial results showed no evidence of a structural break. However on further investigation, when a pulse dummy was included to account for the immediate impact of the fee adjustment the results suggest a unit root process with a structural break in December 1999. This implies that the amalgam fee increase of December 1999 influenced the behaviour patterns of providers. CONCLUSIONS: System changes can be used to change the emphasis from a scheme that was principally exodontia\\/emergency based to a scheme that is more conservative and based on restoration\\/prevention.

Electrospun nanofibers decorated with bio-sonochemically synthesized gold nanoparticles as an ultrasensitive probe in amalgam-based mercury (II) detection system.

Science.gov (United States)

Parsaee, Zohreh

2018-06-01

In this study, bio-ultrasound-assisted synthesized gold nanoparticles using Gracilaria canaliculata algae have been immobilized on a polymeric support and used as a glassy probe chemosensor for detection and rapid removal of Hg 2+ ions. The function of the suggested chemosensor has been explained based on gold-amalgam formation and its catalytic role on the reaction of sodium borohydride and rhodamine B (RhB) with fluorescent and colorimetric sensing function. The catalyzed reduction of RhB by the gold amalgam led to a distinguished color change from red and yellow florescence to colorless by converting the amount of Hg 2+ deposited on Au-NPs. The detection limit of the colorimetric and fluorescence assays for Hg 2+ was 2.21 nM and 1.10 nM respectively. By exposing the mentioned colorless solution to air for at least 2 h, unexpectedly it was observed that the color and fluorescence of RhB were restored. Have the benefit of the above phenomenon a recyclable and portable glass-based sensor has been provided by immobilizing the Au-NPs and RB on the glass slide using electrospinning. Moreover, the introduced combinatorial membrane has facilitated the detection and removal of Hg 2+ ions in various Hg (II)-contaminated real water samples with efficiency of up to 99%. Copyright © 2018 Elsevier B.V. All rights reserved.

Biogeochemical cycle of mercury species in the marine environment

International Nuclear Information System (INIS)

Branica, M.

1987-10-01

Mercury contamination of the coastal marine environment is an important concern as highly toxic methyl-mercury may be formed biogenically in sediments rich in organic matter. The present study was conducted using a highly sensitive adaptation of Cold Vapour Atomic Absorption Spectrophotometry (CVAAS) in which mercury was re-mineralised from a variety of marine matrices (water, sediments and organisms), separated and concentrated by ion-exchange chromatography, trapped as an amalgam in gold wool and subsequently re-released by heating to 900 deg. C. Total and organomercury forms were detected respectively by measuring, in the case of seawater, sample extracts treated and untreated with uv light and, in the case of solid matrices, by ''total digestion'' and 6M HCl extractions. Detection limits were 0.1 ng/1 from a 200 ml water sample and 0.2 μg/kg for a lg solid sample. Water, sediments and organisms were collected by scuba diving from the unpolluted Sibenik aquatorium (including the Krka river estuary), Yugoslavia, and the polluted Kastela Bay, which receives discharge from a chlor-alkali plant. Mercury levels were low in the Sibenik aquatorium (0.34-2.4 ng/dm 3 water, 78-1522 μg/kg sediments and 24-39 μg/kg w.w. in mussels). Organo-mercury was generally below detection limits in water and represented below 0.5% of the total Hg in sediments but 13-88% of the mercury in mussels and fish. In the Kastela Bay, up to 90 ng/dm 3 (water), 11870 μg/kg w.w. (mussels) and 48600 μg kg w.w. (oysters) of Hg was detected. Fortunately methyl-mercury was below 0.5% of this total in all matrices. Hg levels in mussels decreased to 41.3 μg/kg w.w. at 600 m from the source. Further research will now be conducted on the biogeochemical cycle of Hg in estuarine and marine environments, with special attention being paid to the fresh/saline water interface. 9 refs, 2 figs, 5 tabs

Selective interference with pacemaker activity by electrical dental devices.

Science.gov (United States)

Miller, C S; Leonelli, F M; Latham, E

1998-01-01

We sought to determine whether electromagnetic interference with cardiac pacemakers occurs during the operation of contemporary electrical dental equipment. Fourteen electrical dental devices were tested in vitro for their ability to interfere with the function of two Medtronics cardiac pacemakers (one a dual-chamber, bipolar Thera 7942 pacemaker, the other a single-chamber, unipolar Minix 8340 pacemaker). Atrial and ventricular pacemaker output and electrocardiographic activity were monitored by means of telemetry with the use of a Medtronics 9760/90 programmer. Atrial and ventricular pacing were inhibited by electromagnetic interference produced by the electrosurgical unit up to a distance of 10 cm, by the ultrasonic bath cleaner up to 30 cm, and by the magnetorestrictive ultrasonic scalers up to 37.5 cm. In contrast, operation of the amalgamator, electric pulp tester, composite curing light, dental handpieces, electric toothbrush, microwave oven, dental chair and light, ENAC ultrasonic instrument, radiography unit, and sonic scaler did not alter pacing rate or rhythm. These results suggest that certain electrosurgical and ultrasonic instruments may produce deleterious effects in medically fragile patients with cardiac pacemakers.

Mercury Speciation in Contaminated Soils from Old Mining Activities in Mexico Using a Chemical Selective Extraction

OpenAIRE

Gavilán-García, Irma; Santos-Santos, Elvira; Tovar-Gálvez, Luis R.; Gavilán-García, Arturo; Suárez, Sara; Olmos, Jesús

2008-01-01

Amalgamation was heavily used in mining since 1557 in Spanish Colonies. In Mexico and other parts of Latin-America, this process generated tailings which were left aside in the mine backyards. In the valley of Zacatecas, tailings were carried out of the mines due to the run-off from the mountains and contaminated most of the Zacatecan Valley which most important economic activity is agricultural (crop and livestock raising). The main concern in this area is the high level of total mercury fou...

The Impact of Amalgamations on Services in Icelandic Municipalities

Directory of Open Access Journals (Sweden)

Grétar Thór Eythórsson

2018-03-01

Full Text Available This article deals with answering the question whether municipal amalgamations can meet the wishes at the root of the most common motives behind them: to gain cost-efficiency and more quality in the municipal services. The analysis is partly based on a survey among Icelandic local leaders in 2015 and partly on survey among citizens in 8 recently amalgamated municipalities collected with a snowball method through Facebook in the spring and summer 2013. The main results are that the impact of amalgamations on municipal services seems to depend on whether we look at the central or peripheral parts of the municipality. Both leaders and citizens seem to perceive developments of services differently depending on the position in the municipality. In the peripheries, they have significantly more negative view than in the service centres. This has to do with both their evaluation of specific services and their general evaluation of service development. However, in the general evaluation the difference is significantly larger.

Experimental Investigation of Magnetohydrodynamics Effects in Molten Metals and Study of Homogeneity of Radioactive Mercury Amalgams

CERN Document Server

Astone, A

2002-01-01

The high neutrino output demanded for a neutri no factory requests a high power proton beam interacting with a static target. The additional circumstances of limited space and long term stability ask for development of novel concepts for such types of targets. In our working group, part of the Neutri no Factory Working Group (NFWG) of CERN, we are investigating on the proton interaction with the mercury target. This is called the study of proton induced shocks in molten metal. In the US scheme for a neutrino factory the interaction between proton beam and the mercury jet target takes place inside a 20 Tesla solenoidal magnetic field, which serv es as a focusing device for the produced particles. This field of study is refe rred to as Magneto Hydrodynamics (MHD). The high power proton beam deposits a large amount of energy in the small volume of the target, which results in disruption. The aim is to establi...

Human mercury exposure associated with small-scale gold mining in Burkina Faso.

Science.gov (United States)

Tomicic, Catherine; Vernez, David; Belem, Tounaba; Berode, Michèle

2011-06-01

In Burkina Faso, gold ore is one of the main sources of income for an important part of the active population. Artisan gold miners use mercury in the extraction, a toxic metal whose human health risks are well known. The aim of the present study was to assess mercury exposure as well as to understand the exposure determinants of gold miners in Burkinabe small-scale mines. The examined gold miners' population on the different selected gold mining sites was composed by persons who were directly and indirectly related to gold mining activities. But measurement of urinary mercury was performed on workers most susceptible to be exposed to mercury. Thus, occupational exposure to mercury was evaluated among ninety-three workers belonging to eight different gold mining sites spread in six regions of Burkina Faso. Among others, work-related exposure determinants were taken into account for each person during urine sampling as for example amalgamating or heating mercury. All participants were medically examined by a local medical team in order to identify possible symptoms related to the toxic effect of mercury. Mercury levels were high, showing that 69% of the measurements exceeded the ACGIH (American Conference of Industrial Hygienists) biological exposure indice (BEI) of 35 μg per g of creatinine (μg/g-Cr) (prior to shift) while 16% even exceeded 350 μg/g-Cr. Basically, unspecific but also specific symptoms related to mercury toxicity could be underlined among the persons who were directly related to gold mining activities. Only one-third among the studied subpopulation reported about less than three symptoms possibly associated to mercury exposure and nearly half of them suffered from at least five of these symptoms. Ore washers were more involved in the direct handling of mercury while gold dealers in the final gold recovery activities. These differences may explain the overexposure observed in gold dealers and indicate that the refining process is the major source

Clinical study of the marginal microfiltration in restorations with amalgam applying sealant cavitario

OpenAIRE

Lahoud Salem, Víctor; Mendoza Zapata, Janet; Vidal Goñi, Raúl

2014-01-01

The present study to evaluate the clinical evaluation, marginal leakage of 30 amalgams restorations with sealers cavity and 30 amalgams restorations not sealers cavity. After of 12 months observation in amalgams restorations with sealers cavity 100% success in marginal leakage and not presents of secondary caries, not to have presents clinical cases of sensitivity post-operative and pulp inflammation. El presente estudio consistió en evaluar clínicamente la microfiltración marginal en 30 r...

Natural and mining-related mercury in an orogenic greywacke terrane, South Island, New Zealand

International Nuclear Information System (INIS)

Holley, E.A.; Craw, D.; Kim, J.P.

2010-01-01

Mercury (Hg) is naturally present in warm springs and mesothermal (orogenic) gold-bearing quartz vein systems in the South Island of New Zealand. Mercury amalgamation was used historically in ore processing at gold (Au) mines, resulting in composite natural and anthropogenic Hg signatures at these sites. This study compares natural Hg enrichment of the Au vein systems, residual anthropogenic Hg added for amalgamation, and enrichment of naturally present Hg during ore processing. Mercury concentration data are presented for solids and water at historic mine sites, the modern Macraes mine, fault-related warm springs, and zones of naturally occurring cinnabar and Hg-bearing Au. Arsenic (As) concentrations are also presented, as As is the most environmentally significant element in this tectonic setting. Tailings and processing residues at historic mine sites (Blackwater mine, West Coast; Golden Point and Golden Bar, Hyde-Macraes shear zone) contain up to 1000 mg/kg Hg, and in adjacent surface waters Hg is at or slightly above background from 0.6 to 0.8 ng/L. Relative to South Island Hg, As is more environmentally significant: solid wastes at some historic mine and mineral processing sites contain up to 30.5 wt% As due to enrichment of natural As in mineralised rocks. Shallow groundwater and processing waters at the modern Macraes mine are up to 0.01 mg/L Hg due to natural Hg in mineralised rocks, and no significant Hg elevation is evident in nearby surface waters, which are 3 to 10 4 times higher than primary ore, and Hg is disproportionally increased relative to As, indicating that much of the Hg was added during the amalgamation process. Natural cinnabar deposition from warm springs results in localised, strongly elevated Hg, equal to or less than the Hg contents in historic mine processing residues. Warm spring precipitates are up to 111 mg/kg Hg and waters are 0.3 μg/L Hg, comparable to data reported for active North Island geothermal (epithermal-style) systems

Calculation of depleted uranium concentration in dental fillings samples using the nuclear track detector CR-39

International Nuclear Information System (INIS)

Mahdi, K. H.; Subhi, A. T.; Tawfiq, N. F.

2012-12-01

The purpose of this study is to determine the concentration of depleted uranium in dental fillings samples, which were obtained some hospital and dental office, sale of materials deployed in Iraq. 8 samples were examined from two different fillings and lead-filling (amalgam) and composite filling (plastic). concentrations of depleted uranium were determined in these samples using a nuclear track detector CR-39 through the recording of the tracks left by of fragments of fission resulting from the reaction 2 38U (n, f). The samples are bombarded by neutrons emitted from the neutron source (2 41A m-Be) with flux of ( 10 5 n. cm- 2. s -1 ). The period of etching to show the track of fission fragments is 5 hours using NaOH solution with normalization (6.25N), and temperature (60 o C ). Concentration of depleted uranium were calculated by comparison with standard samples. The result that obtained showed that the value of the weighted average for concentration of uranium in the samples fillings (5.54± 1.05) ppm lead to thr filling (amalgam) and (5.33±0.6) ppm of the filling composite (plastic). The hazard- index, the absorbed dose and the effective dose for these concentration were determined. The obtained results of the effective dose for each of the surface of the bone and skin (as the areas most affected by this compensation industrial) is (0.56 mSv / y) for the batting lead (amalgam) and (0.54 mSv / y) for the filling composite (plastic). From the results of study it was that the highest rate is the effective dose to a specimen amalgam filling (0.68 mSv / y) which is less than the allowable limit for exposure of the general people set the World Health Organization (WHO), a (1 mSv / y). (Author)

Benchmarking Parameter-free AMaLGaM on Functions With and Without Noise

NARCIS (Netherlands)

P.A.N. Bosman (Peter); J. Grahl; D. Thierens (Dirk)

2013-01-01

htmlabstractWe describe a parameter-free estimation-of-distribution algorithm (EDA) called the adapted maximum-likelihood Gaussian model iterated density-estimation evolutionary algorithm (AMaLGaM-IDEA, or AMaLGaM for short) for numerical optimization. AMaLGaM is benchmarked within the 2009 black

Reference Electrodes Based on Solid Amalgams

Czech Academy of Sciences Publication Activity Database

Josypčuk, Bohdan; Novotný, Ladislav

2004-01-01

Roč. 16, č. 3 (2004), s. 238-241 ISSN 1040-0397 Grant - others:GIT(AR) 101/02/U111/CZ Institutional research plan: CEZ:AV0Z4040901 Keywords : solid amalgam * reference electrode * voltammetry Subject RIV: CG - Electrochemistry Impact factor: 2.038, year: 2004

The Distribution of Mutans Streptococci in Plaque on the margin of Amalgam, on the Enamel, and on the Surface of Amalgam Restoration

Directory of Open Access Journals (Sweden)

Soeherwin Mangundjaja

2015-10-01

Full Text Available The aim of the study was to evaluate the level of distribution of mutans streptococci on the margin of amalgam restoration, compared with that on the enamel and on the surface of restoration. It is assumed that the level of distribution of mutans streptococci on the margin will be able to influence the presence of secondary caries. In this study the first molars of 20 patients were treated with amalgam restoration. The mutans streptococci was measured as the percentage of total CFU count in the plaque. The results showed a mean count of 108.8 (SD= 55.2 of mutans streptococci in the margin; 97.7 (SD=63.5 on the enamel; and 61.4 (SD=32.4 on the surface of amalgam restoration. It seems that the level of mutans streptococci on the margin is higher than those on the enamel (p=0.006 as well as higher than those on the surface of (p=0.031. It is suggested that elevated level of mutans streptococci on the margin can indicate risk to secondary caries.

Trace mercury determination in drinking and natural water after preconcentration and separation by DLLME-SFO method coupled with cold vapor atomic absorption spectrometry

Directory of Open Access Journals (Sweden)

Abdollahi Atousa

2014-07-01

Full Text Available A novel dispersive liquid–liquid microextraction based on solidification of floating organic drop (DLLME-SFO for simultaneous separation/preconcentration of ultra trace amounts of mercury was used. A method based on amalgamation was used for collection of gaseous mercury on gold coated sand (Gold trap. The concentration of mercury was determined by cold vapor atomic absorption spectrometry (CV-AAS. The DLLME-SFO behavior of mercury by using dithizone as complexing agent was systematically investigated. The factors influencing, the complex formation and extraction of DLLME-SFO method such as type and volume of extraction and disperser solvents, pH, concentration of salt, centrifuging time and concentration of the chelating agent were optimized. The method was successfully applied to the determination of mercury in drinking and natural water and satisfactory relative recoveries (95–105% were achieved. The proposed procedure was based on very low consumption of organic solvents. The other benefits of the system were sensitive, simple, friendly to the environment, rejection of matrix constituent, low cost, the time consuming and high enrichment factor.

Microleakage of bonded amalgam restorations using different adhesive agents with dye under vacuum: An in vitro study

Directory of Open Access Journals (Sweden)

Abhishek Parolia

2011-01-01

Clinical Significance: Bonded amalgam restorations prevent over-preparation and reduce the tooth flexure. GIC type I under amalgam provides chemical bonding in between amalgam and tooth structure and thus reduces the microleakage.

On Reduced Amalgamated Free Products of C*-algebras and the MF-Property

DEFF Research Database (Denmark)

Seebach, Jonas A.

We establish an isomorphism of the group von Neumann algebra of an amalgamated free product of countable Abelian discrete groups. This result is then used to give some new examples of reduced group $ C^* $-algebras which are MF. Finally, we give a characterization of the amalgamated free products...

Mercúrio total em cabelos: uma contribuição para se avaliar o nível de exposição em Poconé, Mato Grosso, Brasil Total mercury in hair: a contribution to the evaluation of mercury exposure levels in Poconé, Mato Grosso, Brazil

Directory of Open Access Journals (Sweden)

Flávia Nogueira

1997-10-01

Full Text Available Ocorrem na Bacia do Rio Bento Gomes (MT, às margens do Pantanal Mato-grossense, cerca de sessenta garimpos de ouro, onde o mercúrio é utilizado de forma intensiva nos processos de produção, através da formação de amálgamas que facilitam a aglutinação de partículas finas. A queima do amálgama nem sempre é feita em sistemas fechados de recuperação, havendo, portanto, perda de vapor para a atmosfera. Este estudo traz resultados de análises de mercúrio total nos cabelos de quatro grupos de voluntários que vivem em Poconé (MT, e faz uma caracterização geral do ambiente no que se refere à presença do metal na água e no sedimento do Rio Bento Gomes. Um equipamento de detecção por fluorescência foi usado para a determinação das concentrações, e os resultados indicam que os valores são mais baixos do que os de outras populações de áreas de garimpo no Brasil. Indicam também que a via ocupacional parece ser a mais eficiente rota potencial de contaminação da população por mercúrio.There are some 60 gold-mining sites in the Bento Gomes River basin (Mato Grosso, at the border of the Mato Grosso Pantanal (Swamp, where mercury is used to agglutinate fine gold particles through amalgamation. During burning of the amalgam to release the gold, mercury vapor is lost to the atmosphere, since closed systems for mercury recovery are not always used. This study shows the results of total mercury analysis in hair from four volunteer groups living in Poconé, Mato Grosso, and presents a general environmental description pertaining to the presence of mercury in water and sediments from the Bento Gomes River. Atomic fluorescence was used for measuring mercury concentrations. The results were lower than for other populations from gold-mining areas in Brazil.

Mercury-induced motor and sensory neurotoxicity: systematic review of workers currently exposed to mercury vapor.

Science.gov (United States)

Fields, Cheryl A; Borak, Jonathan; Louis, Elan D

2017-11-01

The neurotoxicity of elemental mercury (Hg 0 ) is well-recognized, but it is uncertain whether and for how long neurotoxicity persists; among studies that evaluated previously exposed workers, only one examined workers during and also years after exposure ceased. The aim of this review is to document the type, frequency, and dose-relatedness of objective neurological effects in currently exposed mercury workers and thereby provide first approximations of the effects one would have expected in previously exposed workers evaluated during exposure. We systematically reviewed studies of neurotoxicity in currently exposed mercury workers identified by searching MEDLINE (1950-2015), government reports, textbook chapters, and references cited therein; dental cohorts were not included. Outcomes on physical examination (PE), neurobehavioral (NB) tests, and electrophysiological studies were extracted and evaluated for consistency and dose-relatedness. Forty-five eligible studies were identified, comprising over 3000 workers chronically exposed to a range of Hg 0 concentrations (0.002-1.7 mg/m 3 ). Effects that demonstrated consistency across studies and increased frequency across urine mercury levels (200 μg/L, while NB testing is more appropriate for those with lower U Hg levels. They also provide benchmarks to which findings in workers with historical exposure can be compared.

Decomposing one-relator products of cyclic groups into free products with amalgamation

International Nuclear Information System (INIS)

Benyash-Krivets, V V

1998-01-01

The problem of the decomposition of one-relator products of cyclics into non-trivial free products with amalgamation is considered. Two theorems are proved, one of which is as follows. Let G= 2n =R m (a,b)=1>, where n≥0, m≥2, and R(a,b) is a cyclically reduced word containing b in the free group on a and b. Then G is a non-trivial free product with amalgamation. One consequence of this theorem is a proof of the conjecture of Fine, Levin, and Rosenberger that each two-generator one-relator group with torsion is a non-trivial free product with amalgamation

Reasons for failure and replacement of class I and class II amalgam ...

African Journals Online (AJOL)

Aim: The aim of this study is to evaluate the reasons for failure of amalgam restorations in a teaching hospital. Method: A structured questionnaire was used to obtain information from patients presenting with failed amalgam restorations in the conservative clinic of a teaching hospital. The questionnaire was administered by ...

Methods to reduce mercury pollution in small gold mining operations

Directory of Open Access Journals (Sweden)

Pantoja-Timarán, F.

2005-06-01

Full Text Available The use of mercury for gold beneficiation is still a current practice in small mining operations, mainly in underdeveloped countries, due to the low investment required and necessity of easy to operate systems. But the lack of basic protections makes unavoidable the high pollution of water streams, soils, and in fact, human bodies. Some improvements have been done at site like that related to the removal of the mercury from the amalgam, that usually was done in the open air and now have been changed to the utilization of artisan iron retorts which considerably reduce the emissions of mercury vapors to the atmosphere, but there are still high losses of mercury into the waste solids or tailings coming from the amalgamation process (nearly most of the total weight of the ore treated. In order to reduce the mercury losses into the tailings from the process, this research work has been based in the use of cheap systems, available to the isolated miners, to proof that it is feasible to get an important reduction of the losses and the pollution. The procedure has been accomplished by means of washing the ores with alkaline or detergent agents, together with the use of activated mercury purified by electrowinning in a simple device, easily manufactured in site by the own workers. It is also proven herewith that controlling the time of amalgamation and the total amount of mercury used could reduce the total pollution, and in addition, the gold recovery would be improved. This investigation reports the possibility of a reduction of mercury losses down to 2.4 g per 100 g of gold produced (case of rich ores like La Bruja, with gold recovery up to 94 %; and 8,6 g per 100 g of gold produced (from ores with average grades like La Gruesa, and gold recoveries in the range of 92 %. All that is about 20 to 100 times lower than data reported in current bibliography. The introduction of a previous step of the ore concentration in shaking tables, decreases the total

Mercury in urban soils: A comparison of local spatial variability in six European cities

International Nuclear Information System (INIS)

Rodrigues, S.; Pereira, M.E.; Duarte, A.C.; Ajmone-Marsan, F.; Davidson, C.M.; Grcman, H.; Hossack, I.; Hursthouse, A.S.; Ljung, K.; Martini, C.; Otabbong, E.; Reinoso, R.; Ruiz-Cortes, E.; Urquhart, G.J.; Vrscaj, B.

2006-01-01

The objective of this study was to quantify and assess for the first time the variability of total mercury in urban soils at a European level, using a systematic sampling strategy and a common methodology. We report results from a comparison between soil samples from Aveiro (Portugal), Glasgow (Scotland), Ljubljana (Slovenia), Sevilla (Spain), Torino (Italy) and Uppsala (Sweden). At least 25 sampling points (in about 4-5 ha) from a park in each city were sampled at two depths (0-10 and 10-20 cm). Total mercury was determined by pyrolysis atomic absorption spectrometry with gold amalgamation. The quality of results was monitored using certified reference materials (BCR 142R and BCR 141R). Measured total mercury contents varied from 0.015 to 6.3 mg kg -1 . The lowest median values were found in Aveiro, for both surface (0-10 cm) and sub-surface (10-20 cm) samples (0.055 and 0.054 mg kg -1 , respectively). The highest median mercury contents in soil samples were found in samples from Glasgow (1.2 and 1.3 mg kg -1 , for surface and sub-surface samples, respectively). High variability of mercury concentrations was observed, both within each park and between cities. This variability reflecting contributions from natural background, previous anthropogenic activities and differences in the ages of cities and land use, local environmental conditions as well as the influence of their location within the urban area. Short-range variability of mercury concentrations was found to be up to an order of magnitude over the distance of only a few 10 m

The problem of motivating teaching staff in a complex amalgamation.

Science.gov (United States)

Kenrick, M A

1993-09-01

This paper addresses some of the problems brought about by the merger of a number of schools of nursing into a new complex amalgamation. A very real concern in the new colleges of nursing and midwifery in the United Kingdom is the effect of amalgamation on management systems and staff morale. The main focus of this paper is the motivation of staff during this time of change. There is currently a lack of security amongst staff and in many instances the personal job satisfaction of nurse teachers and managers of nurse education has been reduced, which has made the task of motivating staff difficult. Hence, two major theories of motivation and the implications of these theories for managers of nurse education are discussed. The criteria used for the selection of managers within the new colleges, leadership styles and organizational structures are reviewed. The amalgamations have brought about affiliation with higher-education institutions. Some problems associated with these mergers and the effects on the motivation of staff both within the higher-education institutions and the nursing colleges are outlined. Strategies for overcoming some of the problems are proposed including job enlargement, job enrichment, potential achievement rewards and the use of individual performance reviews which may be useful for assessing the ability of all staff, including managers, in the new amalgamations.

Simpler and More Accurate: Weighing the Mercury in Electrolytic Cells by Radiotracer Dilution Method

International Nuclear Information System (INIS)

Sugiharto; Santoso, S.B.; Santoso, G.B.

2010-01-01

Weight of mercury in electrolytic cell of soda industry is usually measured gravimetrically, which is typical labor work in character. Error sources of the gravimetric method might have come from the fact that some mercury's are usually trapped in the cell due to complicated structure of electrolytic cell. This cause unknown errors. In addition, formation of amalgam at the cathode may cause a further uncertainty in the measurement. Total error from gravimetric method is 4% on average. Radiotracer dilution method provides advantages either for simplification of procedure and reduction of measurement error. In this experiment radioisotope mercury 203 Hg, which was prepared in nuclear reactor was used to examine 13 of 14 electrolytic cells of soda plant. Each electrolytic cell was designed containing approximately 700 kg inactive mercury. Before injection, the radioisotope mercury was mixed with non radioisotope mercury in a bath to obtain a suitable injection aliquots and standard references. Calibration curve, which was derived from two stage dilution processes taken from standard references, was used to examine degree of mixing between radioisotope and non radioisotope mercury and it was also used in weight calculation of non radioisotope mercury in electrolytic cell. Injection was carried out simply by pouring the injection aliquots into the flowing mercury at the inlet side of the cell. Mercury samples from the cells were extracted at regular time intervals and filled into vials for counting. This was done for the primary conformation of the completeness of mixing of the tracer with the non radioisotope mercury in each cell. When complete mixing is achieved, the unknown quantity of mercury in each cell was calculated based on mass balance principle. From the calculation the weight of mercury in each electrolytic cell was not the same and maximum error of measurement obtained from this method is 2.48 %. Compared to gravimetrically error mentioned above, it was

Radial multipliers on amalgamated free products of II-factors

DEFF Research Database (Denmark)

Möller, Sören

2014-01-01

Let ℳi be a family of II1-factors, containing a common II1-subfactor 풩, such that [ℳi : 풩] ∈ ℕ0 for all i. Furthermore, let ϕ: ℕ0 → ℂ. We show that if a Hankel matrix related to ϕ is trace-class, then there exists a unique completely bounded map Mϕ on the amalgamated free product of the ℳi...... with amalgamation over 풩, which acts as a radial multiplier. Hereby, we extend a result of Haagerup and the author for radial multipliers on reduced free products of unital C*- and von Neumann algebras....

Preparation of isotopically enriched mercury sulphide targets

Energy Technology Data Exchange (ETDEWEB)

Szerypo, J.; Friebel, H.U.; Frischke, D.; Grossman, R.; Maier, H.J. [Dept. fuer Physik, Univ. Muenchen (LMU) (Germany); Maier-Leibnitz-Lab. (MLL), Garching (Germany)

2007-07-01

The primary difficulty in performing nuclear reactions on mercury is to obtain a suitable target. The primary difficulty in performing nuclear reactions on mercury is to obtain a suitable target. The utilization of amalgam targets has been reported in early publications. These targets, however, were lacking homogeneity and in-beam stability. A thorough investigation of literature shows, that HgS, because of its comparatively high chemical and mechanical stability, is one of the more adequate Hg compounds for accelerator target applications. In this presentation we describe the production of HgS targets consisting of an enriched Hg isotope and S of natural isotopic abundance, starting up from HgO. Following the outline given in [3], in this special case HgS can be prepared by dissolving HgO in diluted HNO{sub 3} and subsequent precipitation of the black HgS modification with gaseous H{sub 2}S. Last step of the target production procedure is evaporation-condensation of HgS in vacuum. In the present case, HgS layers of 500 {mu}g/cm{sup 2} on a backing carbon foil of 26 {mu}g/cm{sup 2} with a protective carbon layer of about 20 {mu}g/cm{sup 2} thickness on top of the HgS layer were produced. (orig.)

A exposição ocupacional ao mercúrio metálico no módulo odontológico de uma unidade básica de saúde localizada na cidade de São Paulo Occupational exposure to metallic mercury in the dentist's office of a public primary health care clinic in the city of São Paulo

Directory of Open Access Journals (Sweden)

Débora M. R. Glina

1997-04-01

Full Text Available Este artigo visa discutir a exposição ocupacional ao mercúrio metálico de dentistas e assistentes, enfocando a avaliação biológica, os efeitos na saúde e a avaliação ambiental. Os métodos utilizados foram visitas à unidade, avaliação ambiental, mapas de riscos, dosagens de mercúrio urinário e avaliação da saúde. Os resultados referentes ao ambiente e processos de trabalho mostraram: 1 as concentrações de vapor de mercúrio que impregnavam o revestimento ou tubulações de encanamentos variaram entre 0,001 e 0,051 mg/m3 de ar; 2 exposição ocupacional, havendo 62,5% dos trabalhadores com dosagens de mercúrio urinário entre 10 e 49µg/l e 37,5% abaixo de 10 µg/l em 1994. Estes trabalhadores estiveram expostos desde 1992, sendo suas dosagens de mercúrio urinário de 1992 inferiores às atuais; 3 vazamento de mercúrio e amalgamação inadequada, em função de um amalgamador defeituoso; 4 a necessidade de usar um pedaço de camurça para obter um amalgama homogêneo e remover o excesso de mercúrio; 5 a existência de riscos combinados e simultâneos na situação de trabalho. Os resultados concernentes à saúde mostraram: 1 a prevalência de sintomas relativos ao Sistema Nervoso Central; 2sinais do quadro neurológico e/ou do quadro psíquico, mas não do quadro gastrintestinal; 3 intoxicações crônicas de leves a moderadas em 62,5% dos trabalhadores.This paper discusses occupational exposure to metallic mercury among dentists and dental assistants, focusing on biological evaluation, effects on heaith, and environmental evaluation. Methods included visits to the clinic, hazard maps, urinary and environmental mercury measurements, and evaluation of health status. Results for the environment and work processes showed that mercury vapor concentrations impregnating surfaces and piping varied from 0.001 to 0.051 mg/m3 in air; occupational exposure with 62.5% of health workers having HgU ranging from 10 to 49 mg/l and 37

Simpler and More Accurate: Weighing the Mercury in Electrolytic Cells by Radiotracer Dilution Method

Directory of Open Access Journals (Sweden)

Sugiharto

2010-08-01

Full Text Available Weight of mercury in electrolytic cell of soda industry is usually measured gravimetrically, which is typical labor work in character. Error sources of the gravimetric method might have come from the fact that some mercury’s are usually trapped in the cell due to complicated structure of electrolytic cell. This cause unknown errors. In addition, formation of amalgam at the cathode may cause a further uncertainty in the measurement. Total error from gravimetric method is 4% on average. Radiotracer dilution method provides advantages either for simplification of procedure and reduction of measurement error. In this experiment radioisotope mercury 203Hg, which was prepared in nuclear reactor was used to examine 13 of 14 electrolytic cells of soda plant. Each electrolytic cell was designed containing approximately 700 kg inactive mercury. Before injection, the radioisotope mercury was mixed with non radioisotope mercury in a bath to obtain a suitable injection aliquots and standard references. Calibration curve, which was derived from two stage dilution processes taken from standard references, was used to examine degree of mixing between radioisotope and non radioisotope mercury and it was also used in weight calculation of non radioisotope mercury in electrolytic cell. Injection was carried out simply by pouring the injection aliquots into the flowing mercury at the inlet side of the cell. Mercury samples from the cells were extracted at regular time intervals and filled into vials for counting. This was done for the primary conformation of the completeness of mixing of the tracer with the non radioisotope mercury in each cell. When complete mixing is achieved, the unknown quantity of mercury in each cell was calculated based on mass balance principle. From the calculation the weight of mercury in each electrolytic cell was not the same and maximum error of measurement obtained from this method is 2.48 %. Compared to gravimetrically error

Progressive Amalgamation of Building Clusters for Map Generalization Based on Scaling Subgroups

Directory of Open Access Journals (Sweden)

Xianjin He

2018-03-01

Full Text Available Map generalization utilizes transformation operations to derive smaller-scale maps from larger-scale maps, and is a key procedure for the modelling and understanding of geographic space. Studies to date have largely applied a fixed tolerance to aggregate clustered buildings into a single object, resulting in the loss of details that meet cartographic constraints and may be of importance for users. This study aims to develop a method that amalgamates clustered buildings gradually without significant modification of geometry, while preserving the map details as much as possible under cartographic constraints. The amalgamation process consists of three key steps. First, individual buildings are grouped into distinct clusters by using the graph-based spatial clustering application with random forest (GSCARF method. Second, building clusters are decomposed into scaling subgroups according to homogeneity with regard to the mean distance of subgroups. Thus, hierarchies of building clusters can be derived based on scaling subgroups. Finally, an amalgamation operation is progressively performed from the bottom-level subgroups to the top-level subgroups using the maximum distance of each subgroup as the amalgamating tolerance instead of using a fixed tolerance. As a consequence of this step, generalized intermediate scaling results are available, which can form the multi-scale representation of buildings. The experimental results show that the proposed method can generate amalgams with correct details, statistical area balance and orthogonal shape while satisfying cartographic constraints (e.g., minimum distance and minimum area.

The amalgam of faith and reason: Euclid’s Elements and the scientific thinker

DEFF Research Database (Denmark)

Andrade-Molina, Melissa; Valero, Paola; Ravn, Ole

2017-01-01

child intertwines with what was ought to be the ‘scientific thinker’ to Christianity. We focus on how Euclidean geometry, taken as a proper method of inquiry amalgamated with the Christian worldview to provide explanations about the natural world. In modern education, the core of this amalgamation...

Pencemaran air raksa (Hg sebagai dampak pengolahan bijih emas di Sungai Ciliunggunung, Waluran, Kabupaten Sukabumi

Directory of Open Access Journals (Sweden)

Widodo Widodo

2014-06-01

Full Text Available http://dx.doi.org/10.17014/ijog.vol3no3.20083Gold ore mining at Waluran Subregency, Sukabumi Regency was carried out by an underground mining method, and only rock that contains high enough gold ore would be taken (selective mining. The gold ore from the mining was processed with a direct amalgamation method, so it produced low gold concentrate, but the concentrate of mercury discarded to the river was high enough. Monitoring result of water and sedimentation in Ciliunggunung River in 2004, showed that the river was contamined by mercury (Hg, and the contamination was above the value limit. This happened especially in August 2005 where the Hg content was about 0.218 mg/l on the Ciliunggunung River in CLG.07. The chemical analysis result of heavy metals for the water of the Ciliunggunung River in CLG.07 was known to contain Fe above the standard drinking water criteria, meanwhile Mn, Cu, Pb, and As were still under the maximum drinking water criteria value. To decrease the mercury contamination, it is suggested the process of gold ore from the amalgamation direct method to be changed to the amalgamation indirect method. The indirect gold ore amalgamation process consists of: removing fine particles by washing, grinding ore, and the amalgamation phase. The total impact of the indirect amalgamation method will increase the tying of gold by mercury, so the losing of mercury will be decreased and the gain of gold will be optimum.  

Determination of mercury and selenium in biological materials by neutron activation analysis method

International Nuclear Information System (INIS)

Catharino, Marilia G.M.; Vasconcellos, Marina B.A.; Moreira, Edson G.; Cipriano, Roseli; Saiki, Mitiko

2000-01-01

Mercury presents a great number of applications, however, many mercury compounds are highly toxic and may cause diseases or even death. Other element of interest is selenium, as some studies have shown that it may reduce the toxic effects of mercury and other toxic elements, due to its ability to bind to these elements. In this work the mercury concentration in the 'Spiked Human Hair' IAEA-085 and 'Unspiked Human Hair' IAEA-086 certified reference materials, in hair samples of children under dental treatment and in hair samples of an Amazon Region population, subject to mercurial contamination was determined. Selenium determination was done using 77m Se and 75 Se radioisotopes. The selenium concentration was determined also in the (IAEA-085, IAEA-086, 'Dogfish Liver' DOLT-1 and 'Dogfish Muscle' DORM-1) certified reference materials, vitamin supplement and nail clipping samples. (author)

Impact of oxy-fuel combustion gases on mercury retention in activated carbons from a macroalgae waste: effect of water.

Science.gov (United States)

Lopez-Anton, M A; Ferrera-Lorenzo, N; Fuente, E; Díaz-Somoano, M; Suarez-Ruíz, I; Martínez-Tarazona, M R; Ruiz, B

2015-04-01

The aim of this study is to understand the different sorption behaviors of mercury species on activated carbons in the oxy-fuel combustion of coal and the effect of high quantities of water vapor on the retention process. The work evaluates the interactions between the mercury species and a series of activated carbons prepared from a macroalgae waste (algae meal) from the agar-agar industry in oxy-combustion atmospheres, focussing on the role that the high concentration of water in the flue gases plays in mercury retention. Two novel aspects are considered in this work (i) the impact of oxy-combustion gases on the retention of mercury by activated carbons and (ii) the performance of activated carbons prepared from biomass algae wastes for this application. The results obtained at laboratory scale indicate that the effect of the chemical and textural characteristics of the activated carbons on mercury capture is not as important as that of reactive gases, such as the SOx and water vapor present in the flue gas. Mercury retention was found to be much lower in the oxy-combustion atmosphere than in the O2+N2 (12.6% O2) atmosphere. However, the oxidation of elemental mercury (Hg0) to form oxidized mercury (Hg2+) amounted to 60%, resulting in an enhancement of mercury retention in the flue gas desulfurization units and a reduction in the amalgamation of Hg0 in the CO2 compression unit. This result is of considerable importance for the development of technologies based on activated carbon sorbents for mercury control in oxy-combustion processes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Potential hazards and artifacts of ferromagnetic and nonferromagnetic surgical and dental materials and devices in nuclear magnetic resonance imaging

International Nuclear Information System (INIS)

New, P.F.J.; Rosen, B.R.; Brady, T.J.

1983-01-01

The risks to patients with metal surgical implants who are undergoing nuclear magnetic resonance (NMR) imaging and the artifacts caused by such implants were studied. Twenty-one aneurysm and other hemostatic clips and a variety of other materials (e.g., dental amalgam, 14 karat gold) were used. Longitudinal forces and torques were found to be exerted upon 16 of the 21 clips. With five aneurysm clips, forces and torques sufficient to produce risk of hemorrhage from dislocation of the clip from the vessel or aneurysm, or cerebral injury by clip displacement without dislodgement were identified. The induced ferromagnetism was shown to be related to the composition of the alloys from which the clips were manufactured. Clips with 10-14% nickel are evidently without sufficient induced ferromagnetism to cause hazard. The extent of NMR imaging artifacts was greater for materials with measurable ferromagnetic properties, but metals without measurable ferromagnetism in our tests also resulted in significant artifacts. Dental amalgam and 14 karat gold produced no imaging artifacts, but stainless steels in dentures and orthodontic braces produced extensive artifacts in the facial region

Identification and molecular analysis of mercury resistant bacteria in ...

African Journals Online (AJOL)

Mercury (Hg) is one of the most important toxic pollutants widespread in the environment. It is being extensively used in industrial applications (chlor-alkali electrolysis, fungicides, disinfectants, dental products, etc), resulting in local hot spots of pollution and serious effects on biota and humans. The aim of this study was to ...

Determination of mercury in an assortment of dietary supplements using an inexpensive combustion atomic absorption spectrometry technique.

Science.gov (United States)

Levine, Keith E; Levine, Michael A; Weber, Frank X; Hu, Ye; Perlmutter, Jason; Grohse, Peter M

2005-01-01

The concentrations of mercury in forty, commercially available dietary supplements, were determined using a new, inexpensive analysis technique. The method involves thermal decomposition, amalgamation, and detection of mercury by atomic absorption spectrometry with an analysis time of approximately six minutes per sample. The primary cost savings from this approach is that labor-intensive sample digestion is not required prior to analysis, further automating the analytical procedure. As a result, manufacturers and regulatory agencies concerned with monitoring lot-to-lot product quality may find this approach an attractive alternative to the more classical acid-decomposition, cold vapor atomic absorption methodology. Dietary supplement samples analyzed included astragalus, calcium, chromium picolinate, echinacea, ephedra, fish oil, ginger, ginkgo biloba, ginseng, goldenseal, guggul, senna, St John's wort, and yohimbe products. Quality control samples analyzed with the dietary supplements indicated a high level of method accuracy and precision. Ten replicate preparations of a standard reference material (NIST 1573a, tomato leaves) were analyzed, and the average mercury recovery was 109% (2.0% RSD). The method quantitation limit was 0.3 ng, which corresponded to 1.5 ng/g sample. The highest found mercury concentration (123 ng/g) was measured in a concentrated salmon oil sample. When taken as directed by an adult, this product would result in an approximate mercury ingestion of 7 mug per week.

Mercury and arsenic in the gold mining regions of the Ankobra River basin in Ghana

Science.gov (United States)

Bannerman, W.; Potin-Gautier, M.; Amoureux, D.; Tellier, S.; Rambaud, A.; Babut, M.; Adimado, A.; Beinhoff, C.

2003-05-01

The river Ankobra flows through the principal gold mining centres in Western Ghana, draining a total area of 8272 km^2 to join the Atlantic ocean. Mercury is used by thousands of small-scale miners in the region to amalgamate gold. Ores mined in some deep shafts and surface mines are arsenopyrites and the region is marked by the presence of heaps of arsenic - rich mine tailings from both past and recent activities. This study was conducted to assess the impact of mining activities on the distribution and speciation of arsenic and mercury in the aquatic environment of the Ankobra River. In all, water (filtered and non-filtered) and bed sediments were collected from various locations within the watershed. Principal parameters investigated include total mercury, arsenic (III), arsenic (V), monomethylarsonic acid (MMAA) and dimethylarsinic acid (DMAA). Seasonal and spatial variations of these parameters were investigated. Quality control systems were adopted at both the environmental and analytical stages of the study. ln general, areas close to the mining centres are the most pollilited. As (V)/As (III) ratios in water are reversed after the first 100-km of the river length with the onset of industrial influence downstream.

Clean technology for the small auriferous mining

International Nuclear Information System (INIS)

Wotruba, Herrnann

2004-01-01

The concentration of gold in the small auriferous mining is characterized by several deficiencies, among them low recovery, emissions of mercury in form of milled mercury; amalgams and vapor, cyanide emissions and of its compounds, low level of industrial security. The mercury is used for the amalgamation of concentrated (taken place by several methods of gravimetric separation), for the amalgamation of the whole mineral load. The last case represents a mercury use in open circuit, with lost discharges of mercury to the process tales. The cyanidation is used in most of the cases for the residuals of the gravimetric concentration. This means that combines amalgamation with cyanidation that is in double cost and double environmental impact. To minimize operation costs and environmental impacts, the following steps of the mineral benefit, are advisable: controlled mill and appropriate to liberate the gold and not over miller; gravimetric concentration to recover a pre-concentrated with lost minimum of gold; Separation of the thick gold (if it exists) of the pre-concentrate. The free and thick gold can separate for gravimetric processes of the pre-concentrate and to smelt it directly; the amalgamation is not more necessary. The pre-concentrated cyanidation for agitation generally has bigger recovery and it is quicker than the traditional method for percolation. The realization of the new process has a gold recovery more high, less operation costs, less cyanide emissions, any emission of mercury and a higher work security. It should be mentioned that the viability and efficiency of the clean process depends of the mineral nature

[A study of different polishing techniques for amalgams and glass-cermet cement by scanning electron microscope (SEM)].

Science.gov (United States)

Kakaboura, A; Vougiouklakis, G; Argiri, G

1989-01-01

Finishing and polishing an amalgam restoration, is considered as an important and necessary step of the restorative procedure. Various polishing techniques have been recommended to success a smooth amalgam surface. The aim of this study was to investigate the influence of three different polishing treatments on the marginal integrity and surface smoothness of restorations made of three commercially available amalgams and a glass-cermet cement. The materials used were the amalgams, Amalcap (Vivadent), Dispersalloy (Johnson and Johnson), Duralloy (Degussa) and the glass-cermet Katac-Silver (ESPE). The occlusal surfaces of the restorations were polished by the methods: I) round bur, No4-rubber cup-zinc oxide paste in a small brush, II) round bur No 4-bur-brown, green and super green (Shofu) polishing cups and points successively and III) amalgam polishing bur of 12-blades-smooth amalgam polishing bur. Photographs from unpolished and polished surfaces of the restorations, were taken with scanning electron microscope, to evaluate the polishing techniques. An improvement of marginal integrity and surface smoothness of all amalgam restorations was observed after the specimens had been polished with the three techniques. Method II, included Shofu polishers, proved the best results in comparison to the methods I and III. Polishing of glass-cermet cement was impossible with the examined techniques.

Using native epiphytic ferns to estimate the atmospheric mercury levels in a small-scale gold mining area of West Java, Indonesia.

Science.gov (United States)

Kono, Yuriko; Rahajoe, Joeni S; Hidayati, Nuril; Kodamatani, Hitoshi; Tomiyasu, Takashi

2012-09-01

Mercury pollution is caused by artisanal and small-scale gold mining (ASGM) operations along the Cikaniki River (West Java, Indonesia). The atmosphere is one of the primary media through which mercury can disperse. In this study, atmospheric mercury levels are estimated using the native epiphytic fern Asplenium nidus complex (A. nidus) as a biomonitor; these estimates shed light on the atmospheric dispersion of mercury released during mining. Samples were collected from 8 sites along the Cikaniki Basin during September-November, 2008 and September-November, 2009. The A. nidus fronds that were attached to tree trunks 1-3m above the ground were collected and measured for total mercury concentration using cold vapor atomic absorption spectrometry (CVAAS) after acid-digestion. The atmospheric mercury was collected using porous gold collectors, and the concentrations were determined using double-amalgam CVAAS. The highest atmospheric mercury concentration, 1.8 × 10(3) ± 1.6 × 10(3) ngm(-3), was observed at the mining hot spot, and the lowest concentration of mercury, 5.6 ± 2.0 ngm(-3), was observed at the remote site from the Cikaniki River in 2009. The mercury concentrations in A. nidus were higher at the mining village (5.4 × 10(3) ± 1.6 × 10(3) ngg(-1)) than at the remote site (70 ± 30 ngg(-1)). The distribution of mercury in A. nidus was similar to that in the atmosphere; a significant correlation was observed between the mercury concentrations in the air and in A. nidus (r=0.895, P<0.001, n=14). The mercury levels in the atmosphere can be estimated from the mercury concentration in A. nidus using a regression equation: log (Hg(A.nidu)/ngg(-1))=0.740 log (Hg(Air)/ngm (-3)) - 1.324. Copyright © 2012 Elsevier Ltd. All rights reserved.