Tucker Wireline Open Hole Wireline Logging; FINAL

International Nuclear Information System (INIS)

Milliken, M.

2002-01-01

The Tucker Wireline unit ran a suite of open hole logs right behind the RMOTC logging contractor for comparison purposes. The tools included Dual Laterolog, Phased Induction, BHC Sonic, and Density-Porosity

40 CFR 146.66 - Logging, sampling, and testing prior to new well operation.

Science.gov (United States)

2010-07-01

... cement bond and variable density log, and a temperature log after the casing is set and cemented. (ii..., gamma ray, and fracture finder logs before the casing is installed; and (B) A cement bond and variable density log, and a temperature log after the casing is set and cemented. (iii) The Director may allow the...

A method of geometrical factors in the theory and interpretation of formation density logging

International Nuclear Information System (INIS)

Kozhevnikov, D.A.; Khathmullin, I.Ph.

1990-01-01

An interpretational model based on the ''radial geometrical factors concept'' is developed to describe the count-rate of a formation density logging (FDL) multi-spaced tool. The model includes two metrological parameters for each detector-source pair of a multi-spaced probe. These are: sensitivity to formation density, S, and radial sensitivity a. Apart from its universal application, the algorithm also allows some diagnoses of the intermediate zone to be made; that is, to reveal zones of consolidation and fracturing. It is shown that empirical algorithms realizing different forms of ''spine and ribs'' charts may be derived from the general algorithm. There is a practical possibility of resolving problems associated with the vicinity of the borehole wall by means of a triple-spaced FDL tool. It is given a corresponding algorithm and a metrological optimization procedure. The validity of the relations established is substantiated by physical measurements and by Monte-Carlo modelling. (author)

California-Nevada uranium logging. Final report

International Nuclear Information System (INIS)

1981-04-01

The purpose of this project was to obtain geophysical logs of industry drill holes to assess the uranium resource potential of geologic formations of interest. The work was part of the US Department of Energy's National Uranium Resource Evaluation (NURE) Program. The principal objective of the logging program was to determine radioelement grade of formations through natural gamma ray detectors. Supplementary information was obtained from resistivity (R), self-potential (SP), point resistance (RE), and neutron density (NN) logs for formation interpretation. Additional data for log interpretation was obtained from caliper logs, casing schedules, and downhole temperature. This data was obtained from well operators when available, with new logs obtained where not formerly available. This report contains a summary of the project and data obtained to date

Estimation of the non records logs from existing logs using artificial neural networks

Directory of Open Access Journals (Sweden)

Mehdi Mohammad Salehi

2017-12-01

Full Text Available Finding the information of the hydrocarbon reservoirs from well logs is one of the main objectives of the engineers. But, missing the log records (due to many reasons such as broken instruments, unsuitable borehole and etc. is a major challenge to achieve it. Prediction of the density and resistivity logs (Rt, DT and LLS from the conventional wire-line logs in one of the Iranian southwest oil fields is the main purpose of this study. Multilayer neural network was applied to develop an intelligent predictive model for prediction of the logs. A total of 3000 data sets from 3 wells (A, B and C of the studied field were used. Among them, the data of A, B and C wells were used to constructing and testing the model, respectively. To evaluate the performance of the model, the mean square error (MSE and correlation coefficient (R2 in the test data were calculated. A comparison between the MSE of the proposed model and recently intelligent models shows that the proposed model is more accurate than others. Acceptable accuracy and using conventional well logging data are the highlight advantages of the proposed intelligent model.

Processing of gamma-ray spectrometric logs

International Nuclear Information System (INIS)

Umiastowski, K.; Dumesnil, P.

1984-10-01

CEA (Commissariat a l'Energie Atomique) has developped a gamma-ray spectrometric tool, containing an analog-to-digital converter. This new tool permits to perform very precise uranium logs (natural gamma-ray spectrometry), neutron activation logs and litho-density logs (gamma-gamma spectrometric logs). Specific processing methods were developped to treate the particular problems of down-hole gamma-ray spectrometry. Extraction of the characteristic gamma-ray peak, even if they are superposed on the background radiation of very high intensity, is possible. This processing methode enables also to obtain geological informations contained in the continuous background of the spectrum. Computer programs are written in high level language for SIRIUS (VICTOR) and APOLLO computers. Exemples of uranium and neutron activation logs treatment are presented [fr

Did you smooth your well logs the right way for seismic interpretation?

International Nuclear Information System (INIS)

Duchesne, Mathieu J; Gaillot, Philippe

2011-01-01

Correlations between physical properties and seismic reflection data are useful to determine the geological nature of seismic reflections and the lateral extent of geological strata. The difference in resolution between well logs and seismic data is a major hurdle faced by seismic interpreters when tying both data sets. In general, log data have a resolution of at least two orders of magnitude greater than seismic data. Smoothing physical property logs improves correlation at the seismic scale. Three different approaches were used and compared to smooth a density log: binomial filtering, seismic wavelet filtering and discrete wavelet transform (DWT) filtering. Regression plots between the density logs and the acoustic impedance show that the data smoothed with the DWT is the only method that preserves the original relationship between the raw density data and the acoustic impedance. Smoothed logs were then used to generate synthetic seismograms that were tied to seismic data at the borehole site. Best ties were achieved using the synthetic seismogram computed with the density log processed with the DWT. The good performance of the DWT is explained by its adaptive multi-scale characteristic which preserved significant local changes of density on the high-resolution data series that were also pictured at the seismic scale. Since synthetic seismograms are generated using smoothed logs, the choice of the smoothing method impacts on the quality of seismic-to-well ties. This ultimately can have economical implications during hydrocarbon exploration or exploitation phases

Logging methods and peeling of Aspen

Science.gov (United States)

T. Schantz-Hansen

1948-01-01

The logging of forest products is influenced by many factors, including the size of the trees, density of the stand, the soundness of the trees, size of the area logged, topography and soil, weather conditions, the degree of utilization, the skill of the logger and the equipment used, the distance from market, etc. Each of these factors influences not only the method...

Nuclear borehole logging for oil exploration

International Nuclear Information System (INIS)

Oelgaard, P.L.

1989-01-01

Reactor physics can be applied to the logging of boreholes for the exploration of oil and gas and the results obtained can be interpreted more correctly by use of reactor physics models, e.g. one-dimensional multi-group diffusion theory adapted for gamma quanta. The standard nuclear logging tools are: natural gamma, gamma density, neutron porosity and the pulsed-neutron tool. The models and interpretation procedures are discussed. 1 fig

The application of full spectrum gamma-gamma techniques to density/photoelectric cross section logging

International Nuclear Information System (INIS)

Minette, D.C.; Hubner, B.G.; Koudelka, J.C.; Schmidt, M.

1986-01-01

The Compensated Z-Densilog instrument is a new full spectrum gamma-gamma logging instrument, measuring the density and photoelectric cross section (Pe) of the formation. This instrument represents an advancement over present instruments in that the observed gamma spectrum is sent to the surface as a full 256-channel spectrum instead of count rates in a few energy gates. This advancement is made possible by the use of high speed digital electronics which are protected from the high temperatures observed downhole by custom-built flasks. In this paper, the new advanced electronics are considered in some detail. This consideration includes a comparison of full spectrum data acquisition with the multiple discriminator window technique, which is the foundation of the ''few gate'' method. Both of these methods are critiqued based upon electronic stability and the information obtained. The full spectrum provided by high speed electronics facilitates a much more sophisticated data analysis. This data analysis, based on phenomenological model of the instrument (Minette, 1984), includes real time compensation for changes in detector gain and crystal resolution. It also includes a ''four-dimensional'' rib-spine plot, which separates the compensation for mudcake density from the compensation for the Pe of the formation and the mudcake. Also included in the software are real time error minimization and real time decision-making techniques. These techniques maximize the sensitivity of the instrument to the density and Pe of the formation and minimize error due to statistical fluctuations. Gain and resolution compensation completes the data analysis. This compensation virtually eliminates density and Pe errors caused by changing gain and resolution

The Spontaneous Ray Log: A New Aid for Constructing Pseudo-Synthetic Seismograms

Science.gov (United States)

Quadir, Adnan; Lewis, Charles; Rau, Ruey-Juin

2018-02-01

Conventional synthetic seismograms for hydrocarbon exploration combine the sonic and density logs, whereas pseudo-synthetic seismograms are constructed with a density log plus a resistivity, neutron, gamma ray, or rarely a spontaneous potential log. Herein, we introduce a new technique for constructing a pseudo-synthetic seismogram by combining the gamma ray (GR) and self-potential (SP) logs to produce the spontaneous ray (SR) log. Three wells, each of which consisted of more than 1000 m of carbonates, sandstones, and shales, were investigated; each well was divided into 12 Groups based on formation tops, and the Pearson product-moment correlation coefficient (PCC) was calculated for each "Group" from each of the GR, SP, and SR logs. The highest PCC-valued log curves for each Group were then combined to produce a single log whose values were cross-plotted against the reference well's sonic ITT values to determine a linear transform for producing a pseudo-sonic (PS) log and, ultimately, a pseudo-synthetic seismogram. The range for the Nash-Sutcliffe efficiency (NSE) acceptable value for the pseudo-sonic logs of three wells was 78-83%. This technique was tested on three wells, one of which was used as a blind test well, with satisfactory results. The PCC value between the composite PS (SR) log with low-density correction and the conventional sonic (CS) log was 86%. Because of the common occurrence of spontaneous potential and gamma ray logs in many of the hydrocarbon basins of the world, this inexpensive and straightforward technique could hold significant promise in areas that are in need of alternate ways to create pseudo-synthetic seismograms for seismic reflection interpretation.

Development of an Intelligent System to Synthesize Petrophysical Well Logs

Directory of Open Access Journals (Sweden)

Morteza Nouri Taleghani

2013-07-01

Full Text Available Porosity is one of the fundamental petrophysical properties that should be evaluated for hydrocarbon bearing reservoirs. It is a vital factor in precise understanding of reservoir quality in a hydrocarbon field. Log data are exceedingly crucial information in petroleum industries, for many of hydrocarbon parameters are obtained by virtue of petrophysical data. There are three main petrophysical logging tools for the determination of porosity, namely neutron, density, and sonic well logs. Porosity can be determined by the use of each of these tools; however, a precise analysis requires a complete set of these tools. Log sets are commonly either incomplete or unreliable for many reasons (i.e. incomplete logging, measurement errors, and loss of data owing to unsuitable data storage. To overcome this drawback, in this study several intelligent systems such as fuzzy logic (FL, neural network (NN, and support vector machine are used to predict synthesized petrophysical logs including neutron, density, and sonic. To accomplish this, the petrophysical well logs data were collected from a real reservoir in one of Iran southwest oil fields. The corresponding correlation was obtained through the comparison of synthesized log values with real log values. The results showed that all intelligent systems were capable of synthesizing petrophysical well logs, but SVM had better accuracy and could be used as the most reliable method compared to the other techniques.

Well logging. Acquisition and applications; Diagraphies. Acquisition et applications

Energy Technology Data Exchange (ETDEWEB)

Serra, O.; Serra, L.

2001-07-01

This reference book on wire-line and LWD well logging covers all geophysical methods of underground survey in a synthetic, visual and dynamical way. It treats of: the physical principle of well logging measurements, the different types of existing probes, the factors that can influence the measurements, and the applications of these measurements. The following well-logging methods are reviewed: resistivity; electromagnetic wave propagation; magnetic susceptibility and magnetic field; spontaneous potential; nuclear logging: natural gamma radioactivity, density logging, photoelectric index, neutron emission probes, hydrogen index or neutron porosity, neutron induced gamma spectroscopy, neutron relaxation time, NMR; acoustic measurements: sonic logging, seismic profiles; texture, structure and stratigraphy data acquisition; borehole diameter measurement; temperature measurement; wire sampling methods; place and role of well-logging in petroleum exploration; well-logging programs. (J.S.)

Computation of porosity and water content from geophysical logs, Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Nelson, P.H.

1996-01-01

Neutron and density logs acquired in boreholes at Yucca Mountain, Nevada are used to determine porosity and water content as a function of depth. Computation of porosity requires an estimate of grain density, which is provided by core data, mineralogical data, or is inferred from rock type where neither core nor mineralogy are available. The porosity estimate is merged with mineralogical data acquired by X-ray diffraction to compute the volumetric fractions of major mineral groups. The resulting depth-based portrayal of bulk rock composition is equivalent to a whole rock analysis of mineralogy and porosity. Water content is computed from epithermal and thermal neutron logs. In the unsaturated zone, the density log is required along with a neutron log. Water content can also be computed from dielectric logs, which were acquired in only a fraction of the boreholes, whereas neutron logs were acquired in all boreholes. Mineralogical data are used to compute a structural (or bound) water estimate, which is subtracted from the total water estimate from the neutron-density combination. Structural water can be subtracted only from intervals where mineralogical analyses are available; otherwise only total water can be reported. The algorithms and procedures are applied to logs acquired during 1979 to 1984 at Yucca Mountain. Examples illustrate the results. Comparison between computed porosity and core measurements shows systematic differences ranging from 0.005 to 0.04. These values are consistent with a sensitivity analysis using uncertainty parameters for good logging conditions. Water content from core measurements is available in only one borehole, yielding a difference between computed and core-based water content of 0.006

Log-concave Probability Distributions: Theory and Statistical Testing

DEFF Research Database (Denmark)

An, Mark Yuing

1996-01-01

This paper studies the broad class of log-concave probability distributions that arise in economics of uncertainty and information. For univariate, continuous, and log-concave random variables we prove useful properties without imposing the differentiability of density functions. Discrete...... and multivariate distributions are also discussed. We propose simple non-parametric testing procedures for log-concavity. The test statistics are constructed to test one of the two implicati ons of log-concavity: increasing hazard rates and new-is-better-than-used (NBU) property. The test for increasing hazard...... rates are based on normalized spacing of the sample order statistics. The tests for NBU property fall into the category of Hoeffding's U-statistics...

Estimating the population density of the Asian tapir (Tapirus indicus) in a selectively logged forest in Peninsular Malaysia.

Science.gov (United States)

Rayan, D Mark; Mohamad, Shariff Wan; Dorward, Leejiah; Aziz, Sheema Abdul; Clements, Gopalasamy Reuben; Christopher, Wong Chai Thiam; Traeholt, Carl; Magintan, David

2012-12-01

The endangered Asian tapir (Tapirus indicus) is threatened by large-scale habitat loss, forest fragmentation and increased hunting pressure. Conservation planning for this species, however, is hampered by a severe paucity of information on its ecology and population status. We present the first Asian tapir population density estimate from a camera trapping study targeting tigers in a selectively logged forest within Peninsular Malaysia using a spatially explicit capture-recapture maximum likelihood based framework. With a trap effort of 2496 nights, 17 individuals were identified corresponding to a density (standard error) estimate of 9.49 (2.55) adult tapirs/100 km(2) . Although our results include several caveats, we believe that our density estimate still serves as an important baseline to facilitate the monitoring of tapir population trends in Peninsular Malaysia. Our study also highlights the potential of extracting vital ecological and population information for other cryptic individually identifiable animals from tiger-centric studies, especially with the use of a spatially explicit capture-recapture maximum likelihood based framework. © 2012 Wiley Publishing Asia Pty Ltd, ISZS and IOZ/CAS.

Intelligent approaches for the synthesis of petrophysical logs

International Nuclear Information System (INIS)

Rezaee, M Reza; Kadkhodaie-Ilkhchi, Ali; Alizadeh, Pooya Mohammad

2008-01-01

Log data are of prime importance in acquiring petrophysical data from hydrocarbon reservoirs. Reliable log analysis in a hydrocarbon reservoir requires a complete set of logs. For many reasons, such as incomplete logging in old wells, destruction of logs due to inappropriate data storage and measurement errors due to problems with logging apparatus or hole conditions, log suites are either incomplete or unreliable. In this study, fuzzy logic and artificial neural networks were used as intelligent tools to synthesize petrophysical logs including neutron, density, sonic and deep resistivity. The petrophysical data from two wells were used for constructing intelligent models in the Fahlian limestone reservoir, Southern Iran. A third well from the field was used to evaluate the reliability of the models. The results showed that fuzzy logic and artificial neural networks were successful in synthesizing wireline logs. The combination of the results obtained from fuzzy logic and neural networks in a simple averaging committee machine (CM) showed a significant improvement in the accuracy of the estimations. This committee machine performed better than fuzzy logic or the neural network model in the problem of estimating petrophysical properties from well logs

Nuclear log interpretation by first principle

International Nuclear Information System (INIS)

Oelgaard, P.L.

1988-07-01

A weakness connected to the present interpretation of nuclear borehole logs is that the interdependence of the various logs and physical effects of importance for the tools are not always taken into account in a correct way. Therefore a new approach to the interpretation of nuclear borehole logs is considered. It is based on the logs obtained with the natural gamma, the neutron porosity, the gamma density, and the pulsed neutron tools. For each of these tools a model, taking into account the important physical effects, is established. These models are incorporated into a computer programme which from the tool signals calculates, by use of iteration, a consistent set of the corresponding formation properties. In the paper the models developed for the four tools and the interpretation programme are briefly described. An example of the use of the interpretation programme is given and compared with a conventional interpretation. (author)

Geophysical logging for mineral exploration and development

International Nuclear Information System (INIS)

Plouffe, R.D.

1981-01-01

It is possible to retrieve from small-diameter holes geophysical data for qualitative interpretation in exploration and quantitative interpretation in the development of orebodies. The primary objectives in the exploration stage are to identify where, within a hole, economic minerals are, and to help in lithological interpretations. Other aspects, which are more quantitative, are the interpretation of downhole logs for parameters which can be used in surface geophysical methods (i.e. density for gravity surveys, acoustic velocities for seismic surveys, and magnetic susceptibility for airborne and ground magnetic surveys). Recent advances in equipment design, portability and durability have made downhole logging in exploration more inexpensive and reliable. This new equipment is being used to generate very precise quantitative results. This is especially true on uranium development projects. The interpretation of gamma logs for eU 3 O 8 values has finally become precise enough that they have begun to replace chemical values in reserve calculations. Another part of development data is density and equilibrium information, which, with today's technology, is being derived from downhole probing. In the years to come, the trends for many metals are toward neutron activation techniques, or in-situ assaying, and the use of multiple logs for better lithological and physical rock property determinations. (auth)

Selective logging: does the imprint remain on tree structure and composition after 45 years?

Science.gov (United States)

Osazuwa-Peters, Oyomoare L.; Chapman, Colin A.; Zanne, Amy E.

2015-01-01

Selective logging of tropical forests is increasing in extent and intensity. The duration over which impacts of selective logging persist, however, remains an unresolved question, particularly for African forests. Here, we investigate the extent to which a past selective logging event continues to leave its imprint on different components of an East African forest 45 years later. We inventoried 2358 stems ≥10 cm in diameter in 26 plots (200 m × 10 m) within a 5.2 ha area in Kibale National Park, Uganda, in logged and unlogged forest. In these surveys, we characterized the forest light environment, taxonomic composition, functional trait composition using three traits (wood density, maximum height and maximum diameter) and forest structure based on three measures (stem density, total basal area and total above-ground biomass). In comparison to unlogged forests, selectively logged forest plots in Kibale National Park on average had higher light levels, different structure characterized by lower stem density, lower total basal area and lower above-ground biomass, and a distinct taxonomic composition driven primarily by changes in the relative abundance of species. Conversely, selectively logged forest plots were like unlogged plots in functional composition, having similar community-weighted mean values for wood density, maximum height and maximum diameter. This similarity in functional composition irrespective of logging history may be due to functional recovery of logged forest or background changes in functional attributes of unlogged forest. Despite the passage of 45 years, the legacy of selective logging on the tree community in Kibale National Park is still evident, as indicated by distinct taxonomic and structural composition and reduced carbon storage in logged forest compared with unlogged forest. The effects of selective logging are exerted via influences on tree demography rather than functional trait composition. PMID:27293697

Monte Carlo Numerical Models for Nuclear Logging Applications

Directory of Open Access Journals (Sweden)

Fusheng Li

2012-06-01

Full Text Available Nuclear logging is one of most important logging services provided by many oil service companies. The main parameters of interest are formation porosity, bulk density, and natural radiation. Other services are also provided from using complex nuclear logging tools, such as formation lithology/mineralogy, etc. Some parameters can be measured by using neutron logging tools and some can only be measured by using a gamma ray tool. To understand the response of nuclear logging tools, the neutron transport/diffusion theory and photon diffusion theory are needed. Unfortunately, for most cases there are no analytical answers if complex tool geometry is involved. For many years, Monte Carlo numerical models have been used by nuclear scientists in the well logging industry to address these challenges. The models have been widely employed in the optimization of nuclear logging tool design, and the development of interpretation methods for nuclear logs. They have also been used to predict the response of nuclear logging systems for forward simulation problems. In this case, the system parameters including geometry, materials and nuclear sources, etc., are pre-defined and the transportation and interactions of nuclear particles (such as neutrons, photons and/or electrons in the regions of interest are simulated according to detailed nuclear physics theory and their nuclear cross-section data (probability of interacting. Then the deposited energies of particles entering the detectors are recorded and tallied and the tool responses to such a scenario are generated. A general-purpose code named Monte Carlo N– Particle (MCNP has been the industry-standard for some time. In this paper, we briefly introduce the fundamental principles of Monte Carlo numerical modeling and review the physics of MCNP. Some of the latest developments of Monte Carlo Models are also reviewed. A variety of examples are presented to illustrate the uses of Monte Carlo numerical models

Some properties of the log-Laplace distribution

International Nuclear Information System (INIS)

Uppuluri, V.R.R.

1980-01-01

A random variable Y is said to have the Laplace distribution or the double exponential distribution whenever its probability density function is given by lambda exp(-lambda abs. value y), where -infinity 0. The random variable X = exp(Y) is said to have the log-Laplace distribution. With the problem of extrapolation to low doses in dose response curves as motivation, an axiomatic characterization of the log-Laplace distribution is obtained. 1 figure

Some properties of the log-Laplace distribution

International Nuclear Information System (INIS)

Uppuluri, V.R.R.

1980-08-01

A random variable γ is said to have the Laplace distribution or the double exponential distribution whenever its probability density function is given by lambda exp(-lambda absolute value (y)), where -infinity 0. The random variable X = exp(γ) is said to have the log-Laplace distribution. With the problem of extrapolation to low doses in dose response curves as a motivation, an axiomatic characterization of the log-Laplace distribution is obtained. 1 figure

Characterization of reservoir fractures using conventional geophysical logging

Directory of Open Access Journals (Sweden)

Paitoon Laongsakul

2011-04-01

Full Text Available In hydrocarbon exploration fractures play an important role as possible pathways for the hydrocarbon flow and bythis enhancing the overall formation’s permeability. Advanced logging methods for fracture analysis, like the boreholeacoustic televiewer and Formation Microscanner (FMS are available, but these are additional and expensive tools. However,open and with water or hydrocarbon filled fractures are also sensitive to electrical and other conventional logging methods.For this study conventional logging data (electric, seismic, etc were available plus additional fracture information from FMS.Taking into account the borehole environment the results show that the micro-spherically focused log indicates fractures byshowing low resistivity spikes opposite open fractures, and high resistivity spikes opposite sealed ones. Compressional andshear wave velocities are reduced when passing trough the fracture zone, which are assumed to be more or less perpendicularto borehole axis. The photoelectric absorption curve exhibit a very sharp peak in front of a fracture filled with bariteloaded mud cake. The density log shows low density spikes that are not seen by the neutron log, usually where fractures,large vugs, or caverns exist. Borehole breakouts can cause a similar effect on the logging response than fractures, but fracturesare often present when this occurs. The fracture index calculation by using threshold and input weight was calculatedand there was in general a good agreement with the fracture data from FMS especially in fracture zones, which mainlycontribute to the hydraulic system of the reservoir. Finally, the overall results from this study using one well are promising,however further research in the combination of different tools for fracture identification is recommended as well as the useof core for further validation.

Application of oil-field well log interpretation techniques to the Cerro Prieto Geothermal Field

Energy Technology Data Exchange (ETDEWEB)

Ershaghi, I.; Phillips, L.B.; Dougherty, E.L.; Handy, L.L.

1979-10-01

An example is presented of the application of oil-field techniques to the Cerro Prieto Field, Mexico. The lithology in this field (sand-shale lithology) is relatively similar to oil-field systems. The study was undertaken as a part of the first series of case studies supported by the Geothermal Log Interpretation Program (GLIP) of the US Department of Energy. The suites of logs for individual wells were far from complete. This was partly because of adverse borehole conditions but mostly because of unavailability of high-temperature tools. The most complete set of logs was a combination of Dual Induction Laterolog, Compensated Formation Density Gamma Ray, Compensated Neutron Log, and Saraband. Temperature data about the wells were sketchy, and the logs had been run under pre-cooled mud condition. A system of interpretation consisting of a combination of graphic and numerical studies was used to study the logs. From graphical studies, evidence of hydrothermal alteration may be established from the trend analysis of SP (self potential) and ILD (deep induction log). Furthermore, the cross plot techniques using data from density and neutron logs may help in establishing compaction as well as rock density profile with depth. In the numerical method, R/sub wa/ values from three different resistivity logs were computed and brought into agreement. From this approach, values of formation temperature and mud filtrate resistivity effective at the time of logging were established.

Upland log volumes and conifer establishment patterns in two northern, upland old-growth redwood forests, a brief synopsis

Science.gov (United States)

Daniel J. Porter; John O. Sawyer

2007-01-01

We characterized the volume, weight and top surface area of naturally fallen logs in an old-growth redwood forest, and quantified conifer recruit densities on these logs and on the surrounding forest floor. We report significantly greater conifer recruit densities on log substrates as compared to the forest floor. Log substrate availability was calculated on a per...

Initial density affects biomass – density and allometric relationships in self-thinning populations of Fagopyrum esculentum

DEFF Research Database (Denmark)

Li, Lei; Weiner, Jacob; Zhou, Daowei

2013-01-01

and the biomass–density trajectory, we grew Fagopyrum esculentum populations at three high densities and measured shoot biomass, density and the height and diameter of individual plants at six harvests. * Initial density did not affect the slope of the log biomass–log density relationship, but there was a clear...... by the biomass density: the relationship between mass and volume. Initial density could affect this by altering allometric growth in a way that influences architectural compactness. An alternative hypothesis is that competition at higher initial density is more size symmetric, which has been shown to reduce...

Effects of cutting date, outdoor storage conditions, and splitting on survival of Agrilus planipennis (Coleoptera: Buprestidae) in firewood logs.

Science.gov (United States)

Petrice, Toby R; Haack, Robert A

2006-06-01

The emerald ash borer Agrilus planipennis Fairmaire (Coleoptera: Buprestidae) is an exotic pest of ash (Fraxinus spp.) in North America. We conducted studies in Michigan to evaluate how different tree cutting dates, outdoor storage conditions, and splitting affected A. planipennis survival in firewood logs. In 2002-2003, we cut logs from A. planipennis-infested ash trees each month, from July to October, and stored half of the logs in shade and half in full sun. In 2003-2004, we tested logs cut July-December; stored in sun versus shade; tarped versus untarped; and whole logs versus split logs. For both years, A. planipennis successfully emerged the summer after cutting from logs that represented all treatments and all cutting dates tested. Adult emergence density was significantly lower in logs cut in July and August. In 2003-2004, A. planipennis adult length was significantly shorter, and percentage of mortality was significantly higher for logs cut in August compared with later months. Emergence density was significantly lower for split logs compared with whole logs for all cutting months except for December. There was no significant difference in adult emergence density between logs stored in full sun versus shade in 2002-2003. In 2003-2004, untarped logs in full sun or shade had significantly lower adult emergence densities than tarped logs in the sun or shade. In conclusion, emergence, survival, and size of A. planipennis was significantly reduced if logs were cut early during larval development (July or August); splitting logs and storing them untarped in full sun or shade further reduced adult emergence. No treatment was 100% effective in preventing adult emergence.

Evaluation the complex lithologies in the oil well using spectral density instrument

International Nuclear Information System (INIS)

Zivanov, M.; Martinovic, S.; Jakovljevic, B.

1991-01-01

Spectral density instrument for logging in the oil wells, beside density, measure photo electrical cross section. The principles of logging are discussed of modern spectral density. Results of logging are used dor determining the complex lithology in the oil well. With this instrument are obtained the more accurate and reliable logging results and better lithology rate and reliable logging results and better lithology determination in the formations. (author)

M-dwarf exoplanet surface density distribution. A log-normal fit from 0.07 to 400 AU

Science.gov (United States)

Meyer, Michael R.; Amara, Adam; Reggiani, Maddalena; Quanz, Sascha P.

2018-04-01

Aims: We fit a log-normal function to the M-dwarf orbital surface density distribution of gas giant planets, over the mass range 1-10 times that of Jupiter, from 0.07 to 400 AU. Methods: We used a Markov chain Monte Carlo approach to explore the likelihoods of various parameter values consistent with point estimates of the data given our assumed functional form. Results: This fit is consistent with radial velocity, microlensing, and direct-imaging observations, is well-motivated from theoretical and phenomenological points of view, and predicts results of future surveys. We present probability distributions for each parameter and a maximum likelihood estimate solution. Conclusions: We suggest that this function makes more physical sense than other widely used functions, and we explore the implications of our results on the design of future exoplanet surveys.

Geophysical borehole logging in the unsaturated zone, Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Schimschal, U.; Nelson, P.H.

1991-01-01

Borehole geophysical logging for site characterization in the volcanic rocks at the proposed nuclear waste repository at Yucca Mountain, Nevada, requires data collection under rather unusual conditions. Logging tools must operate in rugose, dry holes above the water table in the unsaturated zone. Not all logging tools will operate in this environment, therefore; careful consideration must be given to selection and calibration. A sample suite of logs is presented that demonstrates correlation of geological formations from borehole to borehole, the definition of zones of altered mineralogy, and the quantitative estimates of rock properties. The authors show the results of an exploratory calculation of porosity and water saturation based upon density and epithermal neutron logs. Comparison of the results with a few core samples is encouraging, particularly because the logs can provide continuous data in boreholes where core samples are not available

Determination of the geotechnical properties of mudrocks from geophysical logging of the Harwell boreholes

International Nuclear Information System (INIS)

Horseman, S.T.; McCann, D.M.; McEwen, T.J.; Brightman, M.A.

1984-11-01

The geotechnical properties of mainly argillaceous strata at depth in borehole HW3 at Harwell, Oxfordshire have been determined using a variety of borehole geophysical logging techniques. The aim of this work was to assess the usefulness of such techniques for the indirect measurement of the geotechnical properties of the rocks and the subsequent bearing that such knowledge would have on the design of a site investigation programme for the deep disposal of non heat emitting radioactive waste. The borehole was logged by Seismograph Services Ltd over the interval from 165 - 551 m., whilst open and mud filled. Seven different geophysical logs were run: caliper, formation density, neutron-neutron, natural-gamma, 3D velocity, spontaneous potential, single point resistance and 16''/64'' normal resistivity. The logs that were of any use in determining geotechnical properties were the neutron-neutron, the formation density and the sonic log. It is suggested that in these types of formation the sonic log, once calibrated for the particular circumstances, could be used to provide a useful downhole strength log. (author)

Borehole logging in uranium exploration

International Nuclear Information System (INIS)

Kulkarni, N.H.

1992-01-01

The ultimate objective of exploration by drilling as far as Atomic Minerals Division is concerned is to locate the ore zone in the subsurface, draw samples and analyze them for their metal content. The presence of the ore zone is also indicated by gamma-ray logging of the borehole. A gamma-ray detector is lowered in the borehole and precise depth and grade of the ore zone is established. This helps the geologist in correlating the ore horizon with the surface outcrop or the ore zone intercepted in adjoining boreholes and in deciding about further drilling and location of boreholes. Most commonly, total gamma measurements are made although some units capable of measuring the gamma-ray spectrum are also in use. It is possible to know if the mineralization is due to uranium without waiting for the laboratory results. The present write up gives a brief account of the principles, equipment and methods of borehole gamma-ray logging including density and self-potential logging. (author). 8 refs., 5 figs

Practical borehole logging procedures for mineral exploration, with emphasis on uranium

International Nuclear Information System (INIS)

1986-01-01

Borehole logging is a basic tool in the exploration for and delineation of uranium deposits. This manual describes recommended procedures for carrying out borehole logging, concentrating on practical aspects of the operation of interest to those actually involved in day-to-day field work. The book begins with a discussion of boreholes and then deals with gamma ray logging as the main method of interest. Information is also provided on other techniques including resistance, spontaneous potential, density and neutron logging. Field procedures are described, and examples of logs and interpretations are given. The appendices provide information on calibration procedures and correction factors, a glossary of useful terms and some relevant basic data regarding drill holes and drilling

Pre-logging Treatment of Invasive Glossy Buckthorn (Frangula alnus Mill. Promotes Regeneration of Eastern White Pine (Pinus strobus L.

Directory of Open Access Journals (Sweden)

Thomas D. Lee

2016-12-01

Full Text Available Non-native glossy buckthorn (Frangula alnus Mill. is invasive in forests of the northeastern USA but little is known of its effects on tree regeneration. We tested whether killing buckthorn stems before logging reduces its post-logging abundance and increases the density and height of eastern white pine (Pinus strobus L. seedlings. Three 0.4 ha plots were clearcut, three were thinned, and three were left as controls. Each plot had previously been divided into three subplots that received different buckthorn treatments during the two years before logging. Buckthorn treatments were (1 stems cut at base five times; (2 stems cut once then heat killed four times; (3 untreated control. Three years post-logging, buckthorn density and stem height were unaffected by logging but equally reduced by the two buckthorn treatments. Buckthorn reduction increased density and height of pine seedlings, and seedling height also increased with logging. In the fifth year post-logging, pine height growth and biomass were greater in clearcut than in thinned treatments, greater in areas of buckthorn removal and, within treated subplots, greater in areas with low buckthorn density than in thickets of recovering buckthorn. Thus, although buckthorn inhibited regenerating pine, pre-logging destruction of buckthorn stems reduced such competition for at least four years.

Coarse woody debris in undisturbed and logged forests in the eastern Brazilian Amazon.

Science.gov (United States)

Michael Keller; Michael Palace; Gregory P. Asner; Rodrigo Jr. Pereira; Jose Natalino M. Silva

2004-01-01

Coarse woody debris (CWD) is an important component of the carbon cycle in tropical forests. We measured the volume and density of fallen CWD at two sites, Cauaxi and Tapajós in the Eastern Amazon. At both sites we studied undisturbed forests (UFs) and logged forests 1 year after harvest. Conventional logging (CL) and reduced impact logging (RIL) were...

Application of nuclear logging to porosity studies in Itaborai basin

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Milena F.S.; Lima, Inaya; Lopes, Ricardo Tadeu, E-mail: milena@lin.ufrj.br, E-mail: inaya@lin.ufrj.br, E-mail: ricardo@lin.ufrj.br [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Lab. de Instrumentacao Nuclear; Ferrucio, Paula Lucia; Borghi, Leonardo, E-mail: ferrucio@acd.ufrj.br, E-mail: borghi@ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Geociencias. Dept. de Geologia; Abreu, Carlos Jorge, E-mail: jo_abreu@unb.br [Universidade de Brasilia (UnB), DF (Brazil). Inst. de Geociencias

2011-07-01

Nuclear logging provides information on bulk density and porosity variations by measuring the intensity of the scattered radiation induced on the formation by radioactive sources. In this study, nuclear logging was employed to analyze the pore-space system of the 2-ITAB-1-RJ well placed on the Itaborai limestone basin, in the state of Rio de Janeiro. This is one of the smallest sedimentary basin in Brazil and it is formed by clastic deposits and travertine limestone rocks which are fractured. Understanding the pore-space system of carbonate rocks has become important subject for the oil industry, specially in Brazil. A Density Gamma Probe (LSD) and a Neutron Probe (NEUT) were used for data acquisition, which nuclear logging was carried out in part of the well, with continuous detection for about 50 m of deep. The detection speed was 4 m/min for the LSD and 5 m/min for the NEUT. The results obtained by nuclear logging showed that the 2-ITAB-1-RJ well consists of three different intervals with rocks ranging from low to moderate porosity present in travertine, marls and gneisses. (author)

powerbox: Arbitrarily structured, arbitrary-dimension boxes and log-normal mocks

Science.gov (United States)

Murray, Steven G.

2018-05-01

powerbox creates density grids (or boxes) with an arbitrary two-point distribution (i.e. power spectrum). The software works in any number of dimensions, creates Gaussian or Log-Normal fields, and measures power spectra of output fields to ensure consistency. The primary motivation for creating the code was the simple creation of log-normal mock galaxy distributions, but the methodology can be used for other applications.

The use of diffusion theory to compute invasion effects for the pulsed neutron thermal decay time log

International Nuclear Information System (INIS)

Tittle, C.W.

1992-01-01

Diffusion theory has been successfully used to model the effect of fluid invasion into the formation for neutron porosity logs and for the gamma-gamma density log. The purpose of this paper is to present results of computations using a five-group time-dependent diffusion code on invasion effects for the pulsed neutron thermal decay time log. Previous invasion studies by the author involved the use of a three-dimensional three-group steady-state diffusion theory to model the dual-detector thermal neutron porosity log and the gamma-gamma density log. The five-group time-dependent code MGNDE (Multi-Group Neutron Diffusion Equation) used in this work was written by Ferguson. It has been successfully used to compute the intrinsic formation life-time correction for pulsed neutron thermal decay time logs. This application involves the effect of fluid invasion into the formation

LogScope

Science.gov (United States)

Havelund, Klaus; Smith, Margaret H.; Barringer, Howard; Groce, Alex

2012-01-01

LogScope is a software package for analyzing log files. The intended use is for offline post-processing of such logs, after the execution of the system under test. LogScope can, however, in principle, also be used to monitor systems online during their execution. Logs are checked against requirements formulated as monitors expressed in a rule-based specification language. This language has similarities to a state machine language, but is more expressive, for example, in its handling of data parameters. The specification language is user friendly, simple, and yet expressive enough for many practical scenarios. The LogScope software was initially developed to specifically assist in testing JPL s Mars Science Laboratory (MSL) flight software, but it is very generic in nature and can be applied to any application that produces some form of logging information (which almost any software does).

Density-based reflectivity in seismic exploration for coal in Alberta, Canada

Energy Technology Data Exchange (ETDEWEB)

Lawton, D.C.; Lyatsky, H.V. (University of Calgary, AB (Canada). Dept. of Geology and Geophysics)

1991-01-01

At a coal field in central Alberta, Canada, the acoustic reflectivity of shallow coal seams was found to be dominated by the density contrast between coal and host bentonitic sediments. Sonic logs and a check-shot survey showed that the compressional-wave velocity is almost constant through the coal zone and the overlying sediments, and ranges in value between 2000 m/s and 2350 m/s over different parts of the coal field. The average coal density is 1400 kg/m{sup 3}, whereas the density of the sediments is about 2200 kg/m{sup 3}. Results are illustrated using logs from a typical drillhole in the coal field. At this location, the time reflectivity sequence based on both the density and sonic logs is very similar to that obtained when the density log only is used, with a constant velocity assumed through the coal zone. At another drillhole location in the coal field, where reflection seismic data had been acquired, a synthetic seismogram generated from the density log closely matches the stacked seismic section. 6 refs., 4 figs.

Timber tree regeneration along abandoned logging roads in a tropical Bolivian forest

DEFF Research Database (Denmark)

Nabe-Nielsen, J.; Severiche, W.; Fredericksen, T.

2007-01-01

Sustainable management of selectively logged tropical forests requires that felled trees are replaced through increased recruitment and growth. This study compares road track and roadside regeneration with regeneration in unlogged and selectively logged humid tropical forest in north-eastern Boli......Sustainable management of selectively logged tropical forests requires that felled trees are replaced through increased recruitment and growth. This study compares road track and roadside regeneration with regeneration in unlogged and selectively logged humid tropical forest in north......-eastern Bolivia. Some species benefited from increased light intensities on abandoned logging roads. Others benefited from low densities of competing vegetation on roads with compacted soils. This was the case for the small-seeded species Ficus boliviana C.C. Berg and Terminalia oblonga (Ruiz & Pav.) Steud. Some...

Dynamic Planar Convex Hull with Optimal Query Time and O(log n · log log n ) Update Time

DEFF Research Database (Denmark)

Brodal, Gerth Stølting; Jakob, Riko

2000-01-01

The dynamic maintenance of the convex hull of a set of points in the plane is one of the most important problems in computational geometry. We present a data structure supporting point insertions in amortized O(log n · log log log n) time, point deletions in amortized O(log n · log log n) time......, and various queries about the convex hull in optimal O(log n) worst-case time. The data structure requires O(n) space. Applications of the new dynamic convex hull data structure are improved deterministic algorithms for the k-level problem and the red-blue segment intersection problem where all red and all...

Calibration of a neutron log in partially saturated media. Part II. Error analysis

International Nuclear Information System (INIS)

Hearst, J.R.; Kasameyer, P.W.; Dreiling, L.A.

1981-01-01

Four sources or error (uncertainty) are studied in water content obtained from neutron logs calibrated in partially saturated media for holes up to 3 m. For this calibration a special facility was built and an algorithm for a commercial epithermal neutron log was developed that obtains water content from count rate, bulk density, and gap between the neutron sonde and the borehole wall. The algorithm contained errors due to the calibration and lack of fit, while the field measurements included uncertainties in the count rate (caused by statistics and a short time constant), gap, and density. There can be inhomogeneity in the material surrounding the borehole. Under normal field conditions the hole-size-corrected water content obtained from such neutron logs can have an uncertainty as large as 15% of its value

Advances in complex reservoir evaluation based on geophysical well logs

Energy Technology Data Exchange (ETDEWEB)

Fertl, W.H.; Sinha, A.K. (Western Atlas International, Inc., Houston, TX (USA)); McDougall, J.G. (Western Atlas Canada Ltd., Calgary, AB (Canada))

1988-09-01

The matrix of reservoirs having complex lithologies, cause different density, neutron, and acoustic responses. Therefore the lithologies and effective porosity of reservoirs can be determined by using various crossplot techniques on data collected from two of these logs. The Complex Reservoir Analysis program (CRA) computes lithology, porosity, water saturation and relative permeabilities in formations with interbedded limestone, dolomite, and anhydrite. Porosity options include crossplot and individual log response techniques. Corrections for light hydrocarbons were applied. In solving for porosity and mineral volumes, sand, limestone, dolomite, and anhydrite lines were defined on either density/neutron or neutron/acoustic crossplots. Four additional mineral lines were specified. Incorporation of Pe data from the Z-Densilog provided a significant advance in evaluating complex reservoirs via the Z-CRA analysis. The classic reservoir evaluation program CLASS, was used to perform both minerals and shaly evaluation based on density, neutron, resistivity, and natural gamma ray spectral measurements. Computations included total and effective porosities, fluid saturation distribution based on the Wasman-Smits model, productivity indices, and volume and distribution of clay minerals. Additional computed formation parameters included log-derived cation exchange capacity and hydrogen index of dry clay matrix to determine the type and amount of smectite, illite and chlorite/kaolinite present. Canadian field experiences was used to illustrate and support the techniques described. 11 refs., 11 figs., 6 tabs.

Hardwood log grades and lumber grade yields for factory lumber logs

Science.gov (United States)

Leland F. Hanks; Glenn L. Gammon; Robert L. Brisbin; Everette D. Rast

1980-01-01

The USDA Forest Service Standard Grades for Hardwood Factory Lumber Logs are described, and lumber grade yields for 16 species and 2 species groups are presented by log grade and log diameter. The grades enable foresters, log buyers, and log sellers to select and grade those log suitable for conversion into standard factory grade lumber. By using the apropriate lumber...

Selective logging and damage to unharvested trees in a hyrcanian forest of Iran

OpenAIRE

Farshad Keivan Behjou; Omid Ghafarzade Mollabashi

2012-01-01

Selective logging in mature hardwood stands of Caspian forests often causes physical damage to residual trees through felling and skidding operations, resulting in a decline in bole quality and subsequent loss of tree value. This study evaluated the logging damage to residual trees following logging operations. A total density of 5.1 trees/ha and 17.3 m3/ha of wood were harvested. On average, 9.8 trees were damaged for every tree extracted, including 8 trees destroyed or severely damaged. The...

Development of slimline logging systems for coal and mineral exploration

International Nuclear Information System (INIS)

Reeves, D.R.

1976-01-01

Recently, interest shown by multinational oil companies in mining prospecting has led to the requirement for more sophisticated slimline logging units, capable of given comparable results to conventional systems. Aspects of operating conditions and logging requirements are discussed, with particular reference to the effect on equipment design. Special consideration is given to the design and calibration of gamma ray, density, neutron, caliper and resistivity tools. Methods of handling data are discussed and the general application of these techniques to mineral work is considered

Logging Concessions Enable Illegal Logging Crisis in the Peruvian Amazon

OpenAIRE

Finer, Matt; Jenkins, Clinton N.; Sky, Melissa A. Blue; Pine, Justin

2014-01-01

The Peruvian Amazon is an important arena in global efforts to promote sustainable logging in the tropics. Despite recent efforts to achieve sustainability, such as provisions in the US?Peru Trade Promotion Agreement, illegal logging continues to plague the region. We present evidence that Peru's legal logging concession system is enabling the widespread illegal logging via the regulatory documents designed to ensure sustainable logging. Analyzing official government data, we found that 68.3%...

Unification of acoustic drillhole logging data

International Nuclear Information System (INIS)

Oehman, I.; Palmen, J.; Heikkinen, E.

2009-04-01

Posiva Oy prepares for disposal of spent nuclear fuel in bedrock in Olkiluoto, Eurajoki. This is in accordance of the application filed in 1999, the Decision-in-Principle of the State Council in 2000, and ratification by the Parliament in 2001. The site characterization at Olkiluoto has included comprehensive geological, hydrological, geochemical and geophysical investigations airborne, on ground and in drillholes since 1988. One of key techniques in geophysical drillhole surveys has been acoustic full waveform logging, which has been implemented since 1994. Various tools have been used in acquisition of acoustic data and several processing techniques have been applied. The logging work and processing to P and S wave velocities has been previously carried out on single drillhole basis. Comparisons to actual values and levels have not been made, and the results have not been calibrated. Therefore results for different drillholes have not been comparable. Resolution of the P and S wave velocity has been rather coarse, and depth correlation to the core data has been on tentative level. As the investigation data has been accumulating, it has become possible to correlate the results to geological and laboratory control data and to calibrate the results of separate measurement campaigns and different drillholes together onto same reference level and resolution. The presented technique has been applied for drillhole OL-KR29 onwards and has set the processing standard, settings and reference levels for later surveys. This approach will further assist the application of the method for mapping and numerical description of lithology variation and possible effect of alteration and deformation on it. Further on, the P and S wave velocity data together with density can be used in computing of dynamic in situ rock mechanical parameters, and possibly in correlating rock strength laboratory data to P and S wave velocity logging data. The acoustic logging data from drillholes OL-KR1

Geophysical logging and hydrologic testing of deep basalt flows in the Rattlesnake Hills Well Number One

International Nuclear Information System (INIS)

Gephart, R.E.; Eddy, P.A.; Deju, R.A.

1979-01-01

Geophysical logging and hydrologic testing were conducted in the Rattlesnake Hills Well Number One located along the western boundary of the Hanford Site in south-central Washington. Three-dimensional velocity, Seisviewer and caliper logging were completed across 2,000 feet of basalt rock within the Wanapum and Grande Ronde formations. Drillstem testing focused along a 250-foot interval of the Grande Ronde Formation. Individual high- (approx. 2.7-2.9 grams per cubic centimeter) and low-density (approx. 2.3-2.6 grams per cubic centimeter) basalt zones within the Wanapum Formation are generally less than 50 feet thick. Within the estimated thickness of the Grande Ronde Formation, 85 percent of the low-density zones are less than 50 feet thick, compared to 55 percent of those of higher density. The Grande Ronde Formation has 13 high-density zones varying in thickness from 51 to 230 feet. Logging data suggest the thicknesses of low-density are independent of the thicknesses of the associated and underlying higher density columnar basalts. Eleven drillstem tests were conducted across selected intervals within the Grande Ronde Formation. Hydraulic conductivity values calculated for the low-density basalt zones ranged between 1.7 x 10 -7 and 3.8 x 10 -9 centimeters per second; those for high-density zones were between 1.1 x 10 -8 and 4.7 x 10 -9 centimeters per second

http Log Analysis

DEFF Research Database (Denmark)

Bøving, Kristian Billeskov; Simonsen, Jesper

2004-01-01

This article documents how log analysis can inform qualitative studies concerning the usage of web-based information systems (WIS). No prior research has used http log files as data to study collaboration between multiple users in organisational settings. We investigate how to perform http log...... analysis; what http log analysis says about the nature of collaborative WIS use; and how results from http log analysis may support other data collection methods such as surveys, interviews, and observation. The analysis of log files initially lends itself to research designs, which serve to test...... hypotheses using a quantitative methodology. We show that http log analysis can also be valuable in qualitative research such as case studies. The results from http log analysis can be triangulated with other data sources and for example serve as a means of supporting the interpretation of interview data...

Technical difficulties of logging while drilling in carbonate reservoirs and the countermeasures: A case study from the Sichuan Basin

Directory of Open Access Journals (Sweden)

Shudong Zhang

2015-12-01

Full Text Available In the Sichuan Basin, carbonate reservoirs are characterized by deep burial depth and strong heterogeneity, so it is difficult to conduct structure steering, pore space reservoir tracking and trajectory control in the process of geosteering logging while drilling. In this paper, a series of corresponding techniques for structure, reservoir and formation tracking were proposed after analysis was conducted on multiple series of carbonate strata in terms of their geologic and logging response characteristics. And investigation was performed on the adaptabilities of the following logging technologies to geosteering while drilling, including gamma ray imaging while drilling, resistivity imaging while drilling, density imaging while drilling, gamma ray logging while drilling, resistivity logging while drilling, neutron logging while drilling and density logging while drilling. After while drilling information was thoroughly analyzed, the logging suites for four common types of complicated reservoirs (thin layered reservoirs, thick massive reservoirs, denuded karst reservoirs and shale gas reservoirs were optimized, and five logging combinations suitable for different formations and reservoirs were proposed, including gamma ray logging + porosity + resistivity imaging, gamma ray logging + resistivity imaging, gamma ray logging + porosity + resistivity logging, gamma ray imaging + resistivity logging, and gamma ray logging. Field application indicates that it is of great reference and application value to use this method for the first time to summarize logging while drilling combinations for different types of carbonate reservoirs.

The application of radiation logs to groundwater hydrology

Energy Technology Data Exchange (ETDEWEB)

Scott Keys, W [United States Geological Survey, Denver, CO (United States)

1967-05-15

The drilling of exploratory holes to determine the availability of groundwater and to plan the most economical methods of water development is expensive. The only technique available at present for obtaining geological and hydrological information through the casing of pre-existing water wells and other boreholes is by radiation logging. Up to now these logging techniques have been little used in groundwater hydrology. This report describes inexpensive portable radiation logging equipment that is available or has been developed for groundwater studies in connection with a general research project on the application of borehole geophysics in groundwater hydrology. It is possible to obtain data on the following: the source, velocity, and chemical quality of groundwater; the location, extent, geometry, bulk density, porosity, permeability, and specific yield of aquifers and associated strata; and the position of casings, casing collars, leaks, perforations, and cement. The radiation logs employed include natural gamma, gamma-gamma, neutron-gamma. neutron epithermal-neutron. and radioactive tracer. The following radioisotopes are utilized: cobalt-60, plutonium-239, americium-241, and iodine-131. Typical radiation logs obtained by the various techniques are described and examples are given of practical applications of radiation logging to groundwater investigations. The applications cited are studies of perched water in basaltic rocks and associated sedimentary strata; the porosity, moisture content, and position of zones into which water was injected in volcanic tuff; the position of the interface between brine and fresh water in fine-grained carbonate rocks and associated fine clastic rocks; the interpretation of porosity from a neutron log; and the location by means of a radioactive tracer of the more permeable fracture zones in a well penetrating crystalline rock. (author)

Maintaining ecosystem resilience: functional responses of tree cavity nesters to logging in temperate forests of the Americas.

Science.gov (United States)

Ibarra, José Tomás; Martin, Michaela; Cockle, Kristina L; Martin, Kathy

2017-06-30

Logging often reduces taxonomic diversity in forest communities, but little is known about how this biodiversity loss affects the resilience of ecosystem functions. We examined how partial logging and clearcutting of temperate forests influenced functional diversity of birds that nest in tree cavities. We used point-counts in a before-after-control-impact design to examine the effects of logging on the value, range, and density of functional traits in bird communities in Canada (21 species) and Chile (16 species). Clearcutting, but not partial logging, reduced diversity in both systems. The effect was much more pronounced in Chile, where logging operations removed critical nesting resources (large decaying trees), than in Canada, where decaying aspen Populus tremuloides were retained on site. In Chile, logging was accompanied by declines in species richness, functional richness (amount of functional niche occupied by species), community-weighted body mass (average mass, weighted by species densities), and functional divergence (degree of maximization of divergence in occupied functional niche). In Canada, clearcutting did not affect species richness but nevertheless reduced functional richness and community-weighted body mass. Although some cavity-nesting birds can persist under intensive logging operations, their ecosystem functions may be severely compromised unless future nest trees can be retained on logged sites.

Ecological Factors Influencing Norway Spruce Regeneration on Nurse Logs in a Subalpine Virgin Forest

Directory of Open Access Journals (Sweden)

Sophie Stroheker

2018-03-01

Full Text Available Regeneration of Picea abies in high-elevation mountain forests often depends on the presence of coarse woody debris (CWD, as logs provide sites with more favorable conditions for spruce regeneration compared to the forest floor. However, there is little quantitative knowledge on the factors that are conducive to or hindering spruce establishment on CWD. We examined spruce regeneration on CWD by sampling 303 plots (50 cm × 50 cm each on 56 downed logs in a virgin forest in the Swiss Alps. Variables describing microsite conditions were measured, and fungi were isolated from wood samples. To investigate the relationship between the ecological factors and establishment success, two models were fitted with seedling and sapling density as response variables, respectively. Besides log diameter, the models identified different ecological factors as significant for seedling and sapling establishment, i.e., regeneration depends on different factors in different development stages. Seedling density depended on the type of rot, log inclination, and decay stage. Sapling density depended mainly on light availability, cover by bark and moss, the time of tree fall, and the distance between the log surface and the forest floor. A total of 22 polypore fungi were isolated from the wood samples, four of them being threatened species. White- and brown-rot fungi were found in all decay stages. The visual assessment of the type of rot in the field corresponded in only 15% of cases to the type of rot caused by the isolated fungi; hence caution is needed when making field assessments of rot types.

Analysis of logging data from nuclear borehole tools

International Nuclear Information System (INIS)

Hovgaard, J.; Oelgaard, P.L.

1989-12-01

The processing procedure for logging data from a borehole of the Stenlille project of Dansk Naturgas A/S has been analysed. The tools considered in the analysis were an integral, natural-gamma tool, a neutron porosity tool, a gamma density tool and a caliper tool. It is believed that in most cases the processing procedure used by the logging company in the interpretation of the raw data is fully understood. An exception is the epithermal part of the neutron porosity tool where all data needed for an interpretation were not available. The analysis has shown that some parts of the interpretation procedure may not be consistent with the physical principle of the tools. (author)

Log N-log S in inconclusive

Science.gov (United States)

Klebesadel, R. W.; Fenimore, E. E.; Laros, J.

1983-01-01

The log N-log S data acquired by the Pioneer Venus Orbiter Gamma Burst Detector (PVO) are presented and compared to similar data from the Soviet KONUS experiment. Although the PVO data are consistent with and suggestive of a -3/2 power law distribution, the results are not adequate at this state of observations to differentiate between a -3/2 and a -1 power law slope.

Encyclopedia of well logging

International Nuclear Information System (INIS)

Desbrandes, R.

1985-01-01

The 16 chapters of this book aim to provide students, trainees and engineers with a manual covering all well-logging measurements ranging from drilling to productions, from oil to minerals going by way of geothermal energy. Each chapter is a summary but a bibliography is given at the end of each chapter. Well-logging during drilling, wireline logging equipment and techniques, petroleum logging, data processing of borehole data, interpretation of well-logging, sampling tools, completion and production logging, logging in relief wells to kill off uncontrolled blowouts, techniques for high temperature geothermal energy, small-scale mining and hydrology, logging with oil-base mud and finally recommended logging programs are all topics covered. There is one chapter on nuclear well-logging which is indexed separately. (UK)

Interpretation of horizontal well production logs: influence of logging tool

Energy Technology Data Exchange (ETDEWEB)

Ozkan, E. [Colorado School of Mines, Boulder, CO (United States); Sarica, C. [Pennsylvania State Univ., College Park, PA (United States); Haci, M. [Drilling Measurements, Inc (United States)

1998-12-31

The influence of a production-logging tool on wellbore flow rate and pressure measurements was investigated, focusing on the disturbence caused by the production-logging tool and the coiled tubing on the original flow conditions in the wellbore. The investigation was carried out using an analytical model and single-phase liquid flow was assumed. Results showed that the production-logging tool influenced the measurements as shown by the deviation of the original flow-rate, pressure profiles and low-conductivity wellbores. High production rates increase the effect of the production-logging tool. Recovering or inferring the original flow conditions in the wellbore from the production-logging data is a very complex process which cannot be solved easily. For this reason, the conditions under which the information obtained by production-logging is meaningful is of considerable practical interest. 7 refs., 2 tabs., 15 figs.

Benefits of obtaining log data in horizontal wells in the WCSB

Energy Technology Data Exchange (ETDEWEB)

Spratt, D. [Reeves Wireline Technologies Ltd., Calgary, AB (Canada)

2001-11-01

A Compact Memory Logging (CML) system developed by Reeves Wireline Technologies was presented. It can be used to obtain log data from horizontal wells to get a better understanding of how to enhance production or completion techniques. The methods that are commonly used to obtain data from horizontal wells include measurement while drilling (MWD), logging while drilling (LWD), wet connect pipe conveyed wireline logging and CML. Each method has its unique benefits that range from information on lithology, rock parameters and fluid interfaces. Reeves has been using wireless pipe conveyed CML over the past two years. The log data includes array induction, dual spaced neutron and photo density porosity, Pe, gamma ray, compensated sonic and hose size caliper. Reeves CML is smaller, easily conveyed and has an unprecedented capability to bend and is considered to be well suited for both newly and previously drilled horizontal wells that require remedial assessment. The tool can be used to determine reservoir quality and boundaries, establish zone structures, or identify fluid interfaces for strategic planning of completions and stimulations. This paper presented examples of logs on some horizontal wells that indicate the value of obtaining log data. Reeves CML is considered to be economically and operationally ideal, particularly since data from the CML includes depth of investigation. 5 figs.

Generating log-normal mock catalog of galaxies in redshift space

Energy Technology Data Exchange (ETDEWEB)

Agrawal, Aniket; Makiya, Ryu; Saito, Shun; Komatsu, Eiichiro [Max-Planck-Institut für Astrophysik, Karl-Schwarzschild-Str. 1, 85741 Garching (Germany); Chiang, Chi-Ting [C.N. Yang Institute for Theoretical Physics, Department of Physics and Astronomy, Stony Brook University, Stony Brook, NY 11794 (United States); Jeong, Donghui, E-mail: aniket@mpa-garching.mpg.de, E-mail: makiya@mpa-garching.mpg.de, E-mail: chi-ting.chiang@stonybrook.edu, E-mail: djeong@psu.edu, E-mail: ssaito@mpa-garching.mpg.de, E-mail: komatsu@mpa-garching.mpg.de [Department of Astronomy and Astrophysics, The Pennsylvania State University, University Park, PA 16802 (United States)

2017-10-01

We present a public code to generate a mock galaxy catalog in redshift space assuming a log-normal probability density function (PDF) of galaxy and matter density fields. We draw galaxies by Poisson-sampling the log-normal field, and calculate the velocity field from the linearised continuity equation of matter fields, assuming zero vorticity. This procedure yields a PDF of the pairwise velocity fields that is qualitatively similar to that of N-body simulations. We check fidelity of the catalog, showing that the measured two-point correlation function and power spectrum in real space agree with the input precisely. We find that a linear bias relation in the power spectrum does not guarantee a linear bias relation in the density contrasts, leading to a cross-correlation coefficient of matter and galaxies deviating from unity on small scales. We also find that linearising the Jacobian of the real-to-redshift space mapping provides a poor model for the two-point statistics in redshift space. That is, non-linear redshift-space distortion is dominated by non-linearity in the Jacobian. The power spectrum in redshift space shows a damping on small scales that is qualitatively similar to that of the well-known Fingers-of-God (FoG) effect due to random velocities, except that the log-normal mock does not include random velocities. This damping is a consequence of non-linearity in the Jacobian, and thus attributing the damping of the power spectrum solely to FoG, as commonly done in the literature, is misleading.

Analysis of RIA standard curve by log-logistic and cubic log-logit models

International Nuclear Information System (INIS)

Yamada, Hideo; Kuroda, Akira; Yatabe, Tami; Inaba, Taeko; Chiba, Kazuo

1981-01-01

In order to improve goodness-of-fit in RIA standard analysis, programs for computing log-logistic and cubic log-logit were written in BASIC using personal computer P-6060 (Olivetti). Iterative least square method of Taylor series was applied for non-linear estimation of logistic and log-logistic. Hear ''log-logistic'' represents Y = (a - d)/(1 + (log(X)/c)sup(b)) + d As weights either 1, 1/var(Y) or 1/σ 2 were used in logistic or log-logistic and either Y 2 (1 - Y) 2 , Y 2 (1 - Y) 2 /var(Y), or Y 2 (1 - Y) 2 /σ 2 were used in quadratic or cubic log-logit. The term var(Y) represents squares of pure error and σ 2 represents estimated variance calculated using a following equation log(σ 2 + 1) = log(A) + J log(y). As indicators for goodness-of-fit, MSL/S sub(e)sup(2), CMD% and WRV (see text) were used. Better regression was obtained in case of alpha-fetoprotein by log-logistic than by logistic. Cortisol standard curve was much better fitted with cubic log-logit than quadratic log-logit. Predicted precision of AFP standard curve was below 5% in log-logistic in stead of 8% in logistic analysis. Predicted precision obtained using cubic log-logit was about five times lower than that with quadratic log-logit. Importance of selecting good models in RIA data processing was stressed in conjunction with intrinsic precision of radioimmunoassay system indicated by predicted precision. (author)

LOG-NORMAL DISTRIBUTION OF COSMIC VOIDS IN SIMULATIONS AND MOCKS

Energy Technology Data Exchange (ETDEWEB)

Russell, E.; Pycke, J.-R., E-mail: er111@nyu.edu, E-mail: jrp15@nyu.edu [Division of Science and Mathematics, New York University Abu Dhabi, P.O. Box 129188, Abu Dhabi (United Arab Emirates)

2017-01-20

Following up on previous studies, we complete here a full analysis of the void size distributions of the Cosmic Void Catalog based on three different simulation and mock catalogs: dark matter (DM), haloes, and galaxies. Based on this analysis, we attempt to answer two questions: Is a three-parameter log-normal distribution a good candidate to satisfy the void size distributions obtained from different types of environments? Is there a direct relation between the shape parameters of the void size distribution and the environmental effects? In an attempt to answer these questions, we find here that all void size distributions of these data samples satisfy the three-parameter log-normal distribution whether the environment is dominated by DM, haloes, or galaxies. In addition, the shape parameters of the three-parameter log-normal void size distribution seem highly affected by environment, particularly existing substructures. Therefore, we show two quantitative relations given by linear equations between the skewness and the maximum tree depth, and between the variance of the void size distribution and the maximum tree depth, directly from the simulated data. In addition to this, we find that the percentage of voids with nonzero central density in the data sets has a critical importance. If the number of voids with nonzero central density reaches ≥3.84% in a simulation/mock sample, then a second population is observed in the void size distributions. This second population emerges as a second peak in the log-normal void size distribution at larger radius.

Dose estimative in operators during petroleum wells logging with nuclear wireless probes through computer modelling

International Nuclear Information System (INIS)

Souza, Edmilson Monteiro de; Silva, Ademir Xavier da; Lopes, Ricardo T.; Correa, Samanda Cristine Arruda; Rocha, Paula L.F.

2011-01-01

This paper evaluates the absorbed dose and the effective dose on operators during the petroleum well logging with nuclear wireless that uses gamma radiation sources. To obtain the data, a typical scenery of a logging procedure will be simulated with MCNPX Monte Carlo code. The simulated logging probe was the Density Gamma Probe - TRISOND produced by Robertson Geolloging. The absorbed dose values were estimated through the anthropomorphic simulator in male voxel MAX. The effective dose values were obtained using the ICRP 103

An in-situ check of the epithermal neutron log calibration

International Nuclear Information System (INIS)

Burkhard, N.R.

1993-01-01

The epithermal neutron log is used to measure the water content of the formation. The large hole epithermal neutron sonde (ENS) utilized at the Nevada Test Site (NTS) has been calibrated in the Hydrogen Content Test Facility (HCTF). These calibrations are used to correct the measured neutron count rate for the effects of tool stand-off and density. For some time, the suspicion has existed that the water contents that are calculated from the ENS data are too large. Hole U2gj represented a unique opportunity to check the validity of the ENS calibration under realistic logging conditions; a portion of the hole had been cemented and redrilled and then logged. The cements have a known water content and can be used as an in-situ calibration check. The author found that the water contents from the log data after processing with the existing calibrations are consistent with these known cement water contents. In addition, the study indicates that the raw neutron data might be more appropriately smoothed by using a median smoother rather than the currently utilized mean smoother

An in-situ check of the epithermal neutron log calibration

International Nuclear Information System (INIS)

Burkhard, N.R.

1993-09-01

The epithermal neutron log is used to measure the water content of the formation. The large hole epithermal neutron sonde (ENS) that we utilize at the Nevada Test Site (NTS) has been calibrated in the Hydrogen Content Test Facility (HCTF). These calibrations are used to correct the measured neutron count rate for the effects of tool stand-off and density. For sometime, the suspicion has existed that the water contents that are calculated from the ENS data are too large. Hole U2gj represented a unique opportunity to check the validity of the ENS calibration under realistic logging conditions; a portion of the hole had been cemented and re drilled and then logged. The cements have a known water content and can be used as an in situ calibration check. I found that the water contents from the log data after processing with the existing calibrations are consistent with these known cement water contents. In addition, the study indicates that the raw neutron data might be more appropriately smoothed by using a median smoother rather than the currently utilized mean smoother

Log analysis in the shallow oil sands of the San Joaquin Valley, California

International Nuclear Information System (INIS)

Vohs, J.B.

1976-01-01

Many fields in the San Joaquin Valley of California produce oil from a depth of 2,500 ft or less. During the period of primary production in these fields, evaluation of potential pay intervals from logs was restricted to examination of ES logs and correlation. With the introduction of secondary and tertiary recovery techniques the need for more and better answers, more quickly available, became apparent. However, several log-analysis problems had to be resolved. Formation evaluation using well logs was complicated by the shaliness of the sand intervals, the low and variable salinity of the formation waters, and the presence of low-pressure-gas (depleted) zones in many of the shallow sands. Solutions to these problems have required more modern logging programs and interpretation techniques. Logs available for the evaluation of these sands are the dual induction-laterolog, the compensated formation density log, the compensated neutron log, and the microlaterolog or proximity log. With this suite of logs it is possible to determine the shale content, porosity, saturation in the flushed zone, and water saturation of the sand, and to locate the low-pressure-gas sands and depleted zones. In cases where freshwater and oil are interlayered, it is possible to tell which sands contain oil and which contain only water. Because a quick interpretation is required, wellsite techniques are called for. These will be described

Rapid estimation of aquifer salinity structure from oil and gas geophysical logs

Science.gov (United States)

Shimabukuro, D.; Stephens, M.; Ducart, A.; Skinner, S. M.

2016-12-01

We describe a workflow for creating aquifer salinity maps using Archie's equation for areas that have geophysical data from oil and gas wells. We apply this method in California, where geophysical logs are available in raster format from the Division of Oil, Gas, and Geothermal Resource (DOGGR) online archive. This method should be applicable to any region where geophysical logs are readily available. Much of the work is controlled by computer code, allowing salinity estimates for new areas to be rapidly generated. For a region of interest, the DOGGR online database is scraped for wells that were logged with multi-tool suites, such as the Platform Express or Triple Combination Logging Tools. Then, well construction metadata, such as measured depth, spud date, and well orientation, is attached. The resultant local database allows a weighted criteria selection of wells that are most likely to have the shallow resistivity, deep resistivity, and density porosity measurements necessary to calculate salinity over the longest depth interval. The algorithm can be adjusted for geophysical log availability for older well fields and density of sampling. Once priority wells are identified, a student researcher team uses Neuralog software to digitize the raster geophysical logs. Total dissolved solid (TDS) concentration is then calculated in clean, wet sand intervals using the resistivity-porosity method, a modified form of Archie's equation. These sand intervals are automatically selected using a combination of spontaneous potential and the difference in shallow resistivity and deep resistivity measurements. Gamma ray logs are not used because arkosic sands common in California make it difficult to distinguish sand and shale. Computer calculation allows easy adjustment of Archie's parameters. The result is a semi-continuous TDS profile for the wells of interest. These profiles are combined and contoured using standard 3-d visualization software to yield preliminary salinity

Generalized localization for the double trigonometric Fourier series and the Walsh-Fourier series of functions in L log +L log + log +L

International Nuclear Information System (INIS)

Bloshanskaya, S K; Bloshanskii, I L; Roslova, T Y

1998-01-01

For an arbitrary open set Ω subset of I 2 =[0,1) 2 and an arbitrary function f element of L log + L log + log + L(I 2 ) such that f=0 on Ω the double Fourier series of f with respect to the trigonometric system Ψ=E and the Walsh-Paley system Ψ=W is shown to converge to zero (over rectangles) almost everywhere on Ω. Thus, it is proved that generalized localization almost everywhere holds on arbitrary open subsets of the square I 2 for the double trigonometric Fourier series and the Walsh-Fourier series of functions in the class L log + L log + log + L (in the case of summation over rectangles). It is also established that such localization breaks down on arbitrary sets that are not dense in I 2 , in the classes Φ Ψ (L)(I 2 ) for the orthonormal system Ψ=E and an arbitrary function such that Φ E (u)=o(u log + log + u) as u→∞ or for Φ W (u)=u( log + log + u) 1-ε , 0<ε<1

Gamma ray spectrometry logs as a hydrocarbon indicator for clastic reservoir rocks in Egypt.

Science.gov (United States)

Al-Alfy, I M; Nabih, M A; Eysa, E A

2013-03-01

Petroleum oil is an important source for the energy in the world. The Gulf of Suez, Nile Delta and South Valley are important regions for studying hydrocarbon potential in Egypt. A thorium normalization technique was applied on the sandstone reservoirs in the three regions to determine the hydrocarbon potentialities zones using the three spectrometric radioactive gamma ray-logs (eU, eTh and K% logs). The conventional well logs (gamma-ray, deep resistivity, shallow resistivity, neutron, density and sonic logs) are analyzed to determine the net pay zones in these wells. Indices derived from thorium normalized spectral logs indicate the hydrocarbon zones in petroleum reservoirs. The results of this technique in the three regions (Gulf of Suez, Nile Delta and South Valley) are in agreement with the results of the conventional well log analyses by ratios of 82%, 78% and 71% respectively. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

Borehole logging

International Nuclear Information System (INIS)

Olsen, H.

1995-01-01

Numerous ground water investigations have been accomplished by means of borehole logging. Borehole logging can be applied to establish new water recovery wells, to control the existing water producing wells and source areas and to estimate ground water quality. (EG)

Gamma ray spectrometry logs as a hydrocarbon indicator for clastic reservoir rocks in Egypt

International Nuclear Information System (INIS)

Al-Alfy, I.M.; Nabih, M.A.; Eysa, E.A.

2013-01-01

Petroleum oil is an important source for the energy in the world. The Gulf of Suez, Nile Delta and South Valley are important regions for studying hydrocarbon potential in Egypt. A thorium normalization technique was applied on the sandstone reservoirs in the three regions to determine the hydrocarbon potentialities zones using the three spectrometric radioactive gamma ray-logs (eU, eTh and K% logs). The conventional well logs (gamma-ray, deep resistivity, shallow resistivity, neutron, density and sonic logs) are analyzed to determine the net pay zones in these wells. Indices derived from thorium normalized spectral logs indicate the hydrocarbon zones in petroleum reservoirs. The results of this technique in the three regions (Gulf of Suez, Nile Delta and South Valley) are in agreement with the results of the conventional well log analyses by ratios of 82%, 78% and 71% respectively. - Highlights: ► The positive DRAD values indicate the hydrocarbon zones in petroleum reservoirs. ► Thorium normalization was applied to determine the hydrocarbon potentialities. ► The conventional well logs are analyzed to determine the net pay zones in wells. ► Determining hydrocarbon potentialities zones using spectrometric gamma-ray logs

Clonal differences in log end splitting in Eucalyptus grandis in ...

African Journals Online (AJOL)

This paper discusses the juvenile–mature correlation of log end splitting among Eucalyptus grandis clones from two trials and how differences in splitting relate to differences in wood density, pith-to-bark gradient and growth rate. Two approximately 20-year-old Eucalyptus grandis clonal trials at Bergvliet plantation were ...

Logging Concessions Enable Illegal Logging Crisis in the Peruvian Amazon

Science.gov (United States)

Finer, Matt; Jenkins, Clinton N.; Sky, Melissa A. Blue; Pine, Justin

2014-04-01

The Peruvian Amazon is an important arena in global efforts to promote sustainable logging in the tropics. Despite recent efforts to achieve sustainability, such as provisions in the US-Peru Trade Promotion Agreement, illegal logging continues to plague the region. We present evidence that Peru's legal logging concession system is enabling the widespread illegal logging via the regulatory documents designed to ensure sustainable logging. Analyzing official government data, we found that 68.3% of all concessions supervised by authorities were suspected of major violations. Of the 609 total concessions, nearly 30% have been cancelled for violations and we expect this percentage to increase as investigations continue. Moreover, the nature of the violations indicate that the permits associated with legal concessions are used to harvest trees in unauthorized areas, thus threatening all forested areas. Many of the violations pertain to the illegal extraction of CITES-listed timber species outside authorized areas. These findings highlight the need for additional reforms.

Logging concessions enable illegal logging crisis in the Peruvian Amazon.

Science.gov (United States)

Finer, Matt; Jenkins, Clinton N; Sky, Melissa A Blue; Pine, Justin

2014-04-17

The Peruvian Amazon is an important arena in global efforts to promote sustainable logging in the tropics. Despite recent efforts to achieve sustainability, such as provisions in the US-Peru Trade Promotion Agreement, illegal logging continues to plague the region. We present evidence that Peru's legal logging concession system is enabling the widespread illegal logging via the regulatory documents designed to ensure sustainable logging. Analyzing official government data, we found that 68.3% of all concessions supervised by authorities were suspected of major violations. Of the 609 total concessions, nearly 30% have been cancelled for violations and we expect this percentage to increase as investigations continue. Moreover, the nature of the violations indicate that the permits associated with legal concessions are used to harvest trees in unauthorized areas, thus threatening all forested areas. Many of the violations pertain to the illegal extraction of CITES-listed timber species outside authorized areas. These findings highlight the need for additional reforms.

Relative importance of various regeneration mechanisms in different restoration stages of Quercus variabilis forest after selective logging

Directory of Open Access Journals (Sweden)

Yaoqin Xue

2014-08-01

Full Text Available Aim of study: Quercus variabilis (Chinese cork oak reproduces asexually and sexually. This study aimed to determine the status and growth of asexual and sexual recruits of Q. variabilis in different forest recovery stages.Area of study: Three selective logged stands and one unlogged stand in Q. variabilis forest, Shaanxi Province, China.Material and Methods: Origin, number, basal diameter, height and size structure of Q. variabilis shoots (height ≤200 cm were investigated in the plots of 5, 10, and 20-years post-logging stands and unlogged stand. Effects of recovery stage on the density and growth of the three original recruits (stump sprouts, stem base sprouts and true seedlings were analysis by One-way ANOVA.Main results: Sprouts dominated logged stands, whereas true seedlings dominated unlogged stand, stem base sprouts only existed in 20-years post-logging and unlogged stands. Stump sprout density and sprout number per stump both declined with extended post-logging time. True seedlings density increased from 7 to 20 shoots/100 m2 as the postlogging time extended, and peaked in unlogged stand (94 shoots/100 m2. An ongoing size structure was observed in true seedlings in all stands. Stump sprouts were taller and greater than true seedlings.Research highlights: Stump sprouts contributed more to Q. variabilis forest recovery in the early stage after disturbance. The contribution of true seedlings was limited in the same stage, but they were beneficial for population long-term development. Stem base sprouts were most likely to be a survival strategy rather than a reproductive strategy.Key words: asexual reproduction; true seedling; post-logging time; Chinese cork oak.

Subsurface Rock Physical Properties by Downhole Loggings - Case Studies of Continental Deep Drilling in Kanto Distinct, Japan

Science.gov (United States)

Omura, K.

2014-12-01

In recent years, many examples of physical logging have been carried out in deep boreholes. The loggings are direct in-situ measurements of rock physical properties under the ground. They provide significant basic data for the geological, geophysical and geotechnical investigations, e.g., tectonic history, seismic wave propagation, and ground motion prediction. Since about 1980's, Natl. Res. Inst. for Earth Sci. and Disast. Prev. (NIED) dug deep boreholes (from 200m to 3000m depth) in sedimentary basin of Kanto distinct, Japan, for purposes of installing seismographs and hydrological instruments, and in-situ stress and pore pressure measurements. At that time, downhole physical loggings were conducted in the boreholes: spontaneous potential, electrical resistance, elastic wave velocity, formation density, neutron porosity, total gamma ray, caliper, temperature loggings. In many cases, digital data values were provided every 2m or 1m or 0.1m. In other cases, we read printed graphs of logging plots and got digital data values. Data from about 30 boreholes are compiled. Especially, particular change of logging data at the depth of an interface between a shallow part (soft sedimentary rock) and a base rock (equivalent to hard pre-Neogene rock) is examined. In this presentation, the correlations among physical properties of rock (especially, formation density, elastic wave velocity and electrical resistance) are introduced and the relation to the lithology is discussed. Formation density, elastic wave velocity and electric resistance data indicate the data are divide in two groups that are higher or lower than 2.5g/cm3: the one correspond to a shallow part and the other correspond to a base rock part. In each group, the elastic wave velocity and electric resistance increase with increase of formation density. However the rates of increases in the shallow part are smaller than in the base rock part. The shallow part has lower degree of solidification and higher porosity

Geophysical well-log measurements in three drill holes at Salt Valley, Utah

International Nuclear Information System (INIS)

Daniels, J.J.; Hite, R.J.; Scott, J.H.

1980-01-01

Three exploratory drill holes were drilled at Salt Valley, Utah, to study the geologic, physical, geochemical, and hydrologic properties of the evaporite sequence in the Permian Paradox Member of the Hermosa Formation. The results of these studies will be used to help to determine the suitability of salt deposits in the Paradox basin as a storage medium for radioactive waste material. The following geophysical well-log measurements were made in each of the three drill holes: (1) density, (2) neutron, (3) acoustic velocity, (4) normal resistivity, and (5) gamma ray. Widely spaced resistivity and conductivity well-log measurements were made in the deep drill hole. Each of these well-log measurements shows the division of the evaporite sequence into halite and interbed sections. At the present time the most useful well-logging measurements for determining the individual lithologies in an evaporite sequence are gamma ray, neutron, density, and acoustic velocity. The high resistivity contrast between the drilling fluid (0.5 ohm-m) and salt (10,000 ohm-m) makes it difficult to obtain quantitative measurements of electrical properties in an evaporite sequence. Tests of widely spaced electrode configurations show that the effects of the brine on the resistivity measurements can be reduced, and the depth of investigation increased, by increasing the source-receiver electrode spacing. Tests of a single-coil induction probe show good resolution of the contrasting electrical properties of the various interbed lithologies

Maintaining ecosystem resilience: functional responses of tree cavity nesters to logging in temperate forests of the Americas

OpenAIRE

Ibarra, Jose Tomas; Martin, Michaela; Cockle, Kristina L; Martin, Kathy

2017-01-01

Logging often reduces taxonomic diversity in forest communities, but little is known about how this biodiversity loss affects the resilience of ecosystem functions. We examined how partial logging and clearcutting of temperate forests influenced functional diversity of birds that nest in tree cavities. We used point-counts in a before-after-control-impact design to examine the effects of logging on the value, range, and density of functional traits in bird communities in Canada (21 species) a...

Density structure of submarine slump and normal sediments of the first gas production test site at Daini-Atsumi Knoll near Nankai Trough, estimated by LWD logging data

Science.gov (United States)

Suzuki, K.; Takayama, T.; Fujii, T.; Yamamoto, K.

2014-12-01

Many geologists have discussed slope instability caused by gas-hydrate dissociation, which could make movable fluid in pore space of sediments. However, physical property changes caused by gas hydrate dissociation would not be so simple. Moreover, during the period of natural gas-production from gas-hydrate reservoir applying depressurization method would be completely different phenomena from dissociation processes in nature, because it could not be caused excess pore pressure, even though gas and water exist. Hence, in all cases, physical properties of gas-hydrate bearing sediments and that of their cover sediments are quite important to consider this phenomena, and to carry out simulation to solve focusing phenomena during gas hydrate dissociation periods. Daini-Atsumi knoll that was the first offshore gas-production test site from gas-hydrate is partially covered by slumps. Fortunately, one of them was penetrated by both Logging-While-Drilling (LWD) hole and pressure-coring hole. As a result of LWD data analyses and core analyses, we have understood density structure of sediments from seafloor to Bottom Simulating Reflector (BSR). The results are mentioned as following. ・Semi-confined slump showed high-density, relatively. It would be explained by over-consolidation that was result of layer-parallel compression caused by slumping. ・Bottom sequence of slump has relative high-density zones. It would be explained by shear-induced compaction along slide plane. ・Density below slump tends to increase in depth. It is reasonable that sediments below slump deposit have been compacting as normal consolidation. ・Several kinds of log-data for estimating physical properties of gas-hydrate reservoir sediments have been obtained. It will be useful for geological model construction from seafloor until BSR. We can use these results to consider geological model not only for slope instability at slumping, but also for slope stability during depressurized period of gas

Log sampling methods and software for stand and landscape analyses.

Science.gov (United States)

Lisa J. Bate; Torolf R. Torgersen; Michael J. Wisdom; Edward O. Garton; Shawn C. Clabough

2008-01-01

We describe methods for efficient, accurate sampling of logs at landscape and stand scales to estimate density, total length, cover, volume, and weight. Our methods focus on optimizing the sampling effort by choosing an appropriate sampling method and transect length for specific forest conditions and objectives. Sampling methods include the line-intersect method and...

Simulation of density curve for slim borehole using the Monte Carlo code MCNPX

International Nuclear Information System (INIS)

Souza, Edmilson Monteiro de; Silva, Ademir Xavier da; Lopes, Ricardo Tadeu; Lima, Inaya C.B.; Rocha, Paula L.F.

2010-01-01

Borehole logging for formation density has been an important geophysical measurement in oil industry. For calibration of the Gamma Ray nuclear logging tool, numerous rock models of different lithology and densities are necessary. However, the full success of this calibration process is determined by a reliable benchmark, where the complete and precise chemical composition of the standards is necessary. Simulations using the Monte Carlo MCNP have been widely employed in well logging application once it serves as a low-cost substitute for experimental test pits, as well as a means for obtaining data that are difficult to obtain experimentally. Considering this, the purpose of this work is to use the code MCNP to obtain density curves for slim boreholes using Gamma Ray logging tools. For this, a Slim Density Gamma Probe, named TRISOND R , and a 100 mCi Cs-137 gamma source has been modeled with the new version of MCNP code MCNPX. (author)

Simulation of density curve for slim borehole using the Monte Carlo code MCNPX

Energy Technology Data Exchange (ETDEWEB)

Souza, Edmilson Monteiro de; Silva, Ademir Xavier da; Lopes, Ricardo Tadeu, E-mail: emonteiro@nuclear.ufrj.b, E-mail: ademir@nuclear.ufrj.b, E-mail: ricardo@lin.ufrj.b [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), RJ (Brazil). Programa de Engenharia Nuclear; Correa, Samanda Cristine Arruda, E-mail: scorrea@nuclear.ufrj.b [Centro Universitario Estadual da Zona Oeste (CCMAT/UEZO), Rio de Janeiro, RJ (Brazil); Lima, Inaya C.B., E-mail: inaya@lin.ufrj.b [Universidade Estadual do Rio de Janeiro (IPRJ/UERJ) Nova Friburgo, Rio de Janeiro, RJ (Brazil). Instituto Politecnico do Rio de Janeiro; Rocha, Paula L.F., E-mail: ferrucio@acd.ufrj.b [Universidade Federal do Rio de Janeiro (UFRJ) RJ (Brazil). Dept. de Geologia

2010-07-01

Borehole logging for formation density has been an important geophysical measurement in oil industry. For calibration of the Gamma Ray nuclear logging tool, numerous rock models of different lithology and densities are necessary. However, the full success of this calibration process is determined by a reliable benchmark, where the complete and precise chemical composition of the standards is necessary. Simulations using the Monte Carlo MCNP have been widely employed in well logging application once it serves as a low-cost substitute for experimental test pits, as well as a means for obtaining data that are difficult to obtain experimentally. Considering this, the purpose of this work is to use the code MCNP to obtain density curves for slim boreholes using Gamma Ray logging tools. For this, a Slim Density Gamma Probe, named TRISOND{sup R}, and a 100 mCi Cs-137 gamma source has been modeled with the new version of MCNP code MCNPX. (author)

Aruscular mycorhizal fungi alter plant allometry and biomass - density relationships

DEFF Research Database (Denmark)

Zhang, Qian; Zhang, Lu; Weiner, Jacob

2011-01-01

Background and Aims Plant biomass–density relationships during self-thinning are determined mainly by allometry. Both allometry and biomass–density relationship have been shown to vary with abiotic conditions, but the effects of biotic interactions have not been investigated. Arbuscular mycorrhizal....... In self-thinning populations, the slope of the log (mean shoot biomass) vs. log density relationship was significantly steeper for the high AMF treatment (slope = –1·480) than for the low AMF treatment (–1·133). The canopy radius–biomass allometric exponents were not significantly affected by AMF level...

Study of the reservoirs of Jurassic and Cretaceous periods in the south-cast slope of Central Kara-Kum vault using combination of acoustic logging, neutron-gamma logging, gamma logging, and electrical logging

International Nuclear Information System (INIS)

Meredov, T.M.; Baranov, M.I.

1978-01-01

Considered is the possibility of application of the combination of neutron-gamma logging, gamma logging al partitioncoustic logging and electrical logging to lithologica of sections, discovery reservoir layers in carbonate and terrigeneous sections as well as quantitative estimation of the porosity coefficients values at prospecting areas in the south-east slope of Central Kara-Kum vault. Neutron-gamma logging mostly makes it possible to partition carbonate rocks into limestones, dolomites and their interstitial variaties and to indicate sand stone layers with different degree of carbonate content

The Meaning of Logs

NARCIS (Netherlands)

Etalle, Sandro; Massacci, Fabio; Yautsiukhin, Artsiom

2007-01-01

While logging events is becoming increasingly common in computing, in communication and in collaborative work, log systems need to satisfy increasingly challenging (if not conflicting) requirements.Despite the growing pervasiveness of log systems, to date there is no high-level framework which

The Meaning of Logs

NARCIS (Netherlands)

Etalle, Sandro; Massacci, Fabio; Yautsiukhin, Artsiom; Lambrinoudakis, Costas; Pernul, Günther; Tjoa, A Min

While logging events is becoming increasingly common in computing, in communication and in collaborative environments, log systems need to satisfy increasingly challenging (if not conflicting) requirements. In this paper we propose a high-level framework for modeling log systems, and reasoning about

Recovering Risk-Neutral Densities from Brazilian Interest Rate Options

Directory of Open Access Journals (Sweden)

José Renato Haas Ornelas

2011-03-01

Full Text Available Building Risk-Neutral Density (RND from options data is one useful way for extracting market expectations about a financial variable. For a sample of IDI (Brazilian Interbank Deposit Rate Index options from 1998 to 2009, this paper estimates the option-implied Risk-Neutral Densities for the Brazilian short rate using three methods: Shimko, Mixture of Two Log-Normals and Generalized Beta of Second Kind. Our in-sample goodness-of-fit evaluation shows that the Mixture of Log-Normals method provides better fitting to option’s data than the other two methods. The shape of log-normal distributions seems to fit well to the mean-reversal dynamics of Brazilian interest rates. We have also calculated the RND implied Skewness, showing how it could have provided market early-warning signals of the monetary policy outcomes in 2002 and 2003. Overall, Risk-Neutral Densities implied on IDI options showed to be a useful tool for extracting market expectations about future outcomes of the monetary policy.

Necromass in undisturbed and logged forests in the Brazilian Amazon.

Science.gov (United States)

Michael Palace; Michael Keller; Gregory P. Asner; Jose Natalino M. Silva; Carlos. Passos

2007-01-01

Necromass is an important stock of carbon in tropical forests. We estimated volume, density, and mass of fallen and standing necromass in undisturbed and selectively logged forests at Juruena, Mato Grosso, Brazil (10.488S, 58.478W). We also measured standing dead trees at the Tapajos National Forest, Para, Brazil (3.088S, 54.948W) complementing our earlier study there...

Predicting carbonate permeabilities from wireline logs using a back-propagation neural network

International Nuclear Information System (INIS)

Wiener, J.M.; Moll, R.F.; Rogers, J.A.

1991-01-01

This paper explores the applicability of using Neural Networks to aid in the determination of carbonate permeability from wireline logs. Resistivity, interval transit time, neutron porosity, and bulk density logs form Texaco's Stockyard Creek Oil field were used as input to a specially designed neural network to predict core permeabilities in this carbonate reservoir. Also of interest was the comparison of the neural network's results to those of standard statistical techniques. The process of developing the neural network for this problem has shown that a good understanding of the data is required when creating the training set from which the network learns. This network was trained to learn core permeabilities from raw and transformed log data using a hyperbolic tangent transfer function and a sum of squares global error function. Also, it required two hidden layers to solve this particular problem

SDSS Log Viewer: visual exploratory analysis of large-volume SQL log data

Science.gov (United States)

Zhang, Jian; Chen, Chaomei; Vogeley, Michael S.; Pan, Danny; Thakar, Ani; Raddick, Jordan

2012-01-01

User-generated Structured Query Language (SQL) queries are a rich source of information for database analysts, information scientists, and the end users of databases. In this study a group of scientists in astronomy and computer and information scientists work together to analyze a large volume of SQL log data generated by users of the Sloan Digital Sky Survey (SDSS) data archive in order to better understand users' data seeking behavior. While statistical analysis of such logs is useful at aggregated levels, efficiently exploring specific patterns of queries is often a challenging task due to the typically large volume of the data, multivariate features, and data requirements specified in SQL queries. To enable and facilitate effective and efficient exploration of the SDSS log data, we designed an interactive visualization tool, called the SDSS Log Viewer, which integrates time series visualization, text visualization, and dynamic query techniques. We describe two analysis scenarios of visual exploration of SDSS log data, including understanding unusually high daily query traffic and modeling the types of data seeking behaviors of massive query generators. The two scenarios demonstrate that the SDSS Log Viewer provides a novel and potentially valuable approach to support these targeted tasks.

Logging Damage to Residual Trees Following Partial Cutting in a Green Ash-Sugarberry Stand in the Mississippi Delta

Science.gov (United States)

James S. Meadows

1993-01-01

Partial cutting in bottomland hardwoods to control stand density and species composition sometimes results in logging damage to the lower bole and/or roots of residual trees. If severe, logging damage may lead to a decline in tree vigor, which may subsequently stimulate the production of epicormic branches, causing a decrease in bole quality and an eventual loss in...

Static dictionaries on AC⁰ RAMs: query time (√log n/log log n) is necessary and sufficient

DEFF Research Database (Denmark)

Andersson, Arne; Miltersen, Peter Bro; Riis, Søren

1996-01-01

) on the time for answering membership queries in a set of size n when reasonable space is used for the data structure storing the set; the upper bound can be obtained using O(n) space, and the lower bound holds even if we allow space 2polylog n. Several variations of this result are also obtained. Among others......, we show a tradeoff between time and circuit depth under the unit-cost assumption: any RAM instruction set which permits a linear space, constant query time solution to the static dictionary problem must have an instruction of depth Ω(log w/log log to), where w is the word size of the machine (and log...

Interactive effects of historical logging and fire exclusion on ponderosa pine forest structure in the northern Rockies.

Science.gov (United States)

Naficy, Cameron; Sala, Anna; Keeling, Eric G; Graham, Jon; DeLuca, Thomas H

2010-10-01

Increased forest density resulting from decades of fire exclusion is often perceived as the leading cause of historically aberrant, severe, contemporary wildfires and insect outbreaks documented in some fire-prone forests of the western United States. Based on this notion, current U.S. forest policy directs managers to reduce stand density and restore historical conditions in fire-excluded forests to help minimize high-severity disturbances. Historical logging, however, has also caused widespread change in forest vegetation conditions, but its long-term effects on vegetation structure and composition have never been adequately quantified. We document that fire-excluded ponderosa pine forests of the northern Rocky Mountains logged prior to 1960 have much higher average stand density, greater homogeneity of stand structure, more standing dead trees and increased abundance of fire-intolerant trees than paired fire-excluded, unlogged counterparts. Notably, the magnitude of the interactive effect of fire exclusion and historical logging substantially exceeds the effects of fire exclusion alone. These differences suggest that historically logged sites are more prone to severe wildfires and insect outbreaks than unlogged, fire-excluded forests and should be considered a high priority for fuels reduction treatments. Furthermore, we propose that ponderosa pine forests with these distinct management histories likely require distinct restoration approaches. We also highlight potential long-term risks of mechanical stand manipulation in unlogged forests and emphasize the need for a long-term view of fuels management.

Processing well logging data, for example for verification and calibration of well logs

International Nuclear Information System (INIS)

Suau, J.; Boutemy, Y.

1981-01-01

A method is described of machine processing well logging data derived from borehole exploring devices which investigate earth formations traversed by boreholes. The method can be used for verifying and recalibrating logs, reconstructing missing logs and combining the data to form a statistical model of the traversed earth formations. (U.K.)

Physiological and morphological responses of pine and willow saplings to post-fire salvage logging

Science.gov (United States)

Millions, E. L.; Letts, M. G.; Harvey, T.; Rood, S. B.

2015-12-01

With global warming, forest fires may be increasing in frequency, and post-fire salvage logging may become more common. The ecophysiological impacts of this practice on tree saplings remain poorly understood. In this study, we examined the physiological and morphological impacts of increased light intensity, due to post-fire salvage logging, on the conifer Pinus contorta (pine) and deciduous broadleaf Salix lucida (willow) tree and shrub species in the Crowsnest Pass region of southern Alberta. Photosynthetic gas-exchange and plant morphological measurements were taken throughout the summer of 2013 on approximately ten year-old saplings of both species. Neither species exhibited photoinhibition, but different strategies were observed to acclimate to increased light availability. Willow saplings were able to slightly elevate their light-saturated rate of net photosynthesis (Amax) when exposed to higher photosynthetic photon flux density (PPFD), thus increasing their growth rate. Willow also exhibited increased leaf inclination angles and leaf mass per unit area (LMA), to decrease light interception in the salvage-logged plot. By contrast, pine, which exhibited lower Amax and transpiration (E), but higher water-use efficiency (WUE = Amax/E) than willow, increased the rate at which electrons were moved through and away from the photosynthetic apparatus in order to avoid photoinhibition. Acclimation indices were higher in willow saplings, consistent with the hypothesis that species with short-lived foliage exhibit greater acclimation. LMA was higher in pine saplings growing in the logged plot, but whole-plant and branch-level morphological acclimation was limited and more consistent with a response to decreased competition in the logged plot, which had much lower stand density.

La logística integral como ventaja competitiva y sistema logístico

Directory of Open Access Journals (Sweden)

Mario Anselmo Martínez gallardo

2013-07-01

Full Text Available Esta investigación analiza la logística integral como una ventaja competitiva y el sistema logístico. Es opinión de los autores que la logística integral es esencial para el intercambio de mercancías, toda vez que reduce costos y hace más ágil la actividad comercial. La utilización de esta logística representa una ventaja competitiva con respecto de otras empresas por la optimización del capital y ahorro de tiempo.

Measurement of log moisture content and density by gamma and neutron backscatter

International Nuclear Information System (INIS)

Barry, B.J.

2002-01-01

Measurement of the moisture content and green density of wood was investigated using scattering of gamma rays and neutrons. Both of these processes are dependent on density but neutrons are particularly sensitive to the hydrogen content, which changes with moisture content. A material mimicking the green density and moisture content of real wood was successfully used in a laboratory study to establish the feasibility of measuring these within the range found in standing trees. A later field trial indicated that the technique needed more development to take account of the natural variability of real trees. (author). 3 refs., 11 figs., 1 table

The log S -log N distribution of gamma ray brust

International Nuclear Information System (INIS)

Yamagami, Takamasa; Nishimura, Jun; Fujii, Masami

1982-01-01

The relation between the size S and the frequency N of gamma ray burst has been studied. This relation may be determined from the celestial distribution of gamma ray burst sources. The present analysis gives that the log S - log N relation for any direction is determined by the celestial distribution of gamma ray burst sources. The observed bursts were analyzed. The celestial distribution of gamma ray burst sources was observed by the satellites of USSR. The results showed that the distribution seemed to be isotropic. However, the calculated log S - log N relation based on the isotropic distribution wasF in disagreement with the observed ones. As the result of analysis, it was found that the observed bursts missed low energy part because of the threshold of detectors. The levels of discrimination of detection were not clear. When a proper threshold level is set for each type of burst, and the size of bursts is determined, the above mentioned discrepancy will be deleted regardless of luminosity and the spatial distribution of bursts. (Kato, T.)

Digital mineral logging system

International Nuclear Information System (INIS)

West, J.B.

1980-01-01

A digital mineral logging system acquires data from a mineral logging tool passing through a borehole and transmits the data uphole to an electronic digital signal processor. A predetermined combination of sensors, including a deviometer, is located in a logging tool for the acquisition of the desired data as the logging tool is raised from the borehole. Sensor data in analog format is converted in the logging tool to a digital format and periodically batch transmitted to the surface at a predetermined sampling rate. An identification code is provided for each mineral logging tool, and the code is transmitted to the surface along with the sensor data. The self-identifying tool code is transmitted to the digital signal processor to identify the code against a stored list of the range of numbers assigned to that type of tool. The data is transmitted up the d-c power lines of the tool by a frequency shift key transmission technique. At the surface, a frequency shift key demodulation unit transmits the decoupled data to an asynchronous receiver interfaced to the electronic digital signal processor. During a recording phase, the signals from the logging tool are read by the electronic digital signal processor and stored for later processing. During a calculating phase, the stored data is processed by the digital signal processor and the results are outputted to a printer or plotter, or both

A Multi-temporal Analysis of Logging Impacts on Tropical Forest Structure Using Airborne Lidar Data

Science.gov (United States)

Keller, M. M.; Pinagé, E. R.; Duffy, P.; Longo, M.; dos-Santos, M. N.; Leitold, V.; Morton, D. C.

2017-12-01

The long-term impacts of selective logging on carbon cycling and ecosystem function in tropical-forests are still uncertain. Despite improvements in selective logging detection using satellite data, quantifying changes in forest structure from logging and recovery following logging is difficult using orbital data. We analyzed the dynamics of forest structure comparing logged and unlogged forests in the Eastern Brazilian Amazon (Paragominas Municipality, Pará State) using small footprint discrete return airborne lidar data acquired in 2012 and 2014. Logging operations were conducted at the 1200 ha study site from 2006 through 2013 using reduced impact logging techniques—management practices that minimize canopy and ground damage compared to more common conventional logging. Nevertheless, logging still reduced aboveground biomass by 10% to 20% in logged areas compared to intact forests. We aggregated lidar point-cloud data at spatial scales ranging from 50 m to 250 m and developed a binomial classification model based on the height distribution of lidar returns in 2012 and validated the model against the 2014 lidar acquisition. We accurately classified intact and logged forest classes compared with field data. Classification performance improved as spatial resolution increased (AUC = 0.974 at 250 m). We analyzed the differences in canopy gaps, understory damage (based on a relative density model), and biomass (estimated from total canopy height) of intact and logged classes. As expected, logging greatly increased both canopy gap formation and understory damage. However, while the area identified as canopy gap persisted for at least 8 years (from the oldest logging treatments in 2006 to the most recent lidar acquisition in 2014), the effects of ground damage were mostly erased by vigorous understory regrowth after about 5 years. The rate of new gap formation was 6 to 7 times greater in recently logged forests compared to undisturbed forests. New gaps opened at a

Effects of logging on macroinvertebrates in streams with and without buffer strips

Energy Technology Data Exchange (ETDEWEB)

Newbold, J D; Erman, D C; Roby, K B

1980-01-01

The impact of logging with and without buffer strip protection on stream macroinvertebrates was examined through comparisons of community structure in commercially logged and control watersheds throughout northern California. A nonparametric test of community dissimilarities within matched blocks of two control and one or two treated stations showed significant (P < 0.05) logging effects on unprotected streams when Euclidean distance and mutual information were used as dissimilarity indices, but not when chord distance was used. Shannon diversity in unprotected streams was lower (P < 0.01) than in control (unlogged) streams; densities of total macroinvertebrate fauna and of Chironomidae, Baetis, and Nemoura were higher in unprotected streams than in controls (P <0.05). Streams with narrow buffer strips (<30 m) showed significant effects by the Euclidean distance test, but diversity varied widely and was not significantly different from that in either unprotected or control streams than in controls (P < 0.05). Macroinvertebrate communities in streams with wide buffers (greater than or equal to 30m) could not be distinguished from those of controls by either Euclidean distance or diversity; however, diversity in wide-buffered streams was significantly greater than in streams without buffer strips, indicating effective protection from logging effects.

The dependence of the counting efficiency of Marinelli beakers for environmental samples on the density of the samples

International Nuclear Information System (INIS)

Alfassi, Z.B.; Lavi, N.

2005-01-01

The effect of the density of the radioactive material packed in a Marinelli beaker on the counting efficiency was studied. It was found that for all densities (0.4-1.7g/cm 3) studied the counting efficiency (ε) fits the linear log-log dependence on the photon energy (E) above 200keV, i.e. obeying the equation ε=αE β (α, β-parameters). It was found that for each photon energy the counting efficiency is linearly dependent on the density (ρ) of the matrix. ε=a-bρ (a, b-parameters). The parameters of the linear dependence are energy dependent (linear log-log dependence), leading to a final equation for the counting efficiency of Marinelli beaker involving both density of the matrix and the photon energy: ε=α 1 .E β 1 -α 2 E β 2 ρ

Windthrow and salvage logging in an old-growth hemlock-northern hardwoods forest

Science.gov (United States)

Lang, K.D.; Schulte, L.A.; Guntenspergen, G.R.

2009-01-01

Although the initial response to salvage (also known as, post-disturbance or sanitary) logging is known to vary among system components, little is known about longer term forest recovery. We examine forest overstory, understory, soil, and microtopographic response 25 years after a 1977 severe wind disturbance on the Flambeau River State Forest in Wisconsin, USA, a portion of which was salvage logged. Within this former old-growth hemlock-northern hardwoods forest, tree dominance has shifted from Eastern hemlock (Tsuga canadensis) to broad-leaf deciduous species (Ulmus americana, Acer saccharum, Tilia americana, Populus tremuloides, and Betula alleghaniensis) in both the salvaged and unsalvaged areas. While the biological legacies of pre-disturbance seedlings, saplings, and mature trees were initially more abundant in the unsalvaged area, regeneration through root suckers and stump sprouts was common in both areas. After 25 years, tree basal area, sapling density, shrub layer density, and seedling cover had converged between unsalvaged and salvaged areas. In contrast, understory herb communities differed between salvaged and unsalvaged forest, with salvaged forest containing significantly higher understory herb richness and cover, and greater dominance of species benefiting from disturbance, especially Solidago species. Soil bulk density, pH, organic carbon content, and organic nitrogen content were also significantly higher in the salvaged area. The structural legacy of tip-up microtopography remains more pronounced in the unsalvaged area, with significantly taller tip-up mounds and deeper pits. Mosses and some forest herbs, including Athyrium filix-femina and Hydrophyllum virginianum, showed strong positive responses to this tip-up microrelief, highlighting the importance of these structural legacies for understory biodiversity. In sum, although the pathways of recovery differed, this forest appeared to be as resilient to the compound disturbances of windthrow

Density estimation from local structure

CSIR Research Space (South Africa)

Van der Walt, Christiaan M

2009-11-01

Full Text Available Mixture Model (GMM) density function of the data and the log-likelihood scores are compared to the scores of a GMM trained with the expectation maximization (EM) algorithm on 5 real-world classification datasets (from the UCI collection). They show...

Three-dimensional trend mapping using gamma-ray well logs: Simpson Group, south-central Kansas

International Nuclear Information System (INIS)

Doveton, J.H.; Davis, J.C.; Zhu Ke-an

1984-01-01

Gamma-ray logs are useful indicators of shale content as a function of depth. When several gamma-ray logs are drawn from an area, they may be interpreted in terms of shale variation in the 3 dimensions of geographic space and depth. (For several years, statistical moments of logs have been mapped as an expression of major trends of depth variation in lithologic development across an area. Moments have the additional valuable property that they also define unique polynomial trends as a function of depth. This property allows the interpolation of moments between well control to generate a 3-dimensional grid of shale referenced to any location and depth. The method was applied to the Simpson Group (Ordovician) of southcentral Kansas. Graphic results of the study outline the shapes of major sandstone and shale bodies in a series of cross sections.) The areal disposition of the initial transgressive sandstone is revealed on a basal slice map. The method is general and can be used in conjunction with other logs. As an example, use of either a neutron, density, or sonic log could be applied to 3-dimensional trend representations of porosity variation in reservoir units

Automated Detection of Selective Logging in Amazon Forests Using Airborne Lidar Data and Pattern Recognition Algorithms

Science.gov (United States)

Keller, M. M.; d'Oliveira, M. N.; Takemura, C. M.; Vitoria, D.; Araujo, L. S.; Morton, D. C.

2012-12-01

Selective logging, the removal of several valuable timber trees per hectare, is an important land use in the Brazilian Amazon and may degrade forests through long term changes in structure, loss of forest carbon and species diversity. Similar to deforestation, the annual area affected by selected logging has declined significantly in the past decade. Nonetheless, this land use affects several thousand km2 per year in Brazil. We studied a 1000 ha area of the Antimary State Forest (FEA) in the State of Acre, Brazil (9.304 ○S, 68.281 ○W) that has a basal area of 22.5 m2 ha-1 and an above-ground biomass of 231 Mg ha-1. Logging intensity was low, approximately 10 to 15 m3 ha-1. We collected small-footprint airborne lidar data using an Optech ALTM 3100EA over the study area once each in 2010 and 2011. The study area contained both recent and older logging that used both conventional and technologically advanced logging techniques. Lidar return density averaged over 20 m-2 for both collection periods with estimated horizontal and vertical precision of 0.30 and 0.15 m. A relative density model comparing returns from 0 to 1 m elevation to returns in 1-5 m elevation range revealed the pattern of roads and skid trails. These patterns were confirmed by ground-based GPS survey. A GIS model of the road and skid network was built using lidar and ground data. We tested and compared two pattern recognition approaches used to automate logging detection. Both segmentation using commercial eCognition segmentation and a Frangi filter algorithm identified the road and skid trail network compared to the GIS model. We report on the effectiveness of these two techniques.

Geophysical well logging operations and log analysis in Geothermal Well Desert Peak No. B-23-1

Energy Technology Data Exchange (ETDEWEB)

Sethi, D.K.; Fertl, W.H.

1980-03-01

Geothermal Well Desert Peak No. B-23-1 was logged by Dresser Atlas during April/May 1979 to a total depth of 2939 m (9642 ft). A temperature of 209/sup 0/C (408/sup 0/F) was observed on the maximum thermometer run with one of the logging tools. Borehole tools rated to a maximum temperature of 204.4/sup 0/C (400/sup 0/F) were utilized for logging except for the Densilog tool, which was from the other set of borehole instruments, rated to a still higher temperature, i.e., 260/sup 0/C (500/sup 0/F). The quality of the logs recorded and the environmental effects on the log response have been considered. The log response in the unusual lithologies of igneous and metamorphic formations encountered in this well could be correlated with the drill cutting data. An empirical, statistical log interpretation approach has made it possible to obtain meaningful information on the rocks penetrated. Various crossplots/histograms of the corrected log data have been generated on the computer. These are found to provide good resolution between the lithological units in the rock sequence. The crossplotting techniques and the statistical approach were combined with the drill cutting descriptions in order to arrive at the lithological characteristics. The results of log analysis and recommendations for logging of future wells have been included.

Theoretical and Numerical Study of Seismoelectric Logs for Logging While Drilling (LWD

Directory of Open Access Journals (Sweden)

Sun Xiang-Yang

2017-01-01

Full Text Available When the acoustic field propagates in the porous medium, the electromagnetic wave can be induced by the seismoelectric effects which can be used in the logging. This paper studies the seismoelectric wave field and deduces the formulations of the acoustic and electromagnetic field of the liquid in the well, and gives the acoustic and electromagnetic boundary conditions between the driller collar and the log liquid, when the driller collar is added. We also do the numerical simulation of the seismoelectric wave field excited by monopole source, study the velocity dispersion characteristics of the acoustic and electromagnetic field, and investigate the detective depth of the seismoelectric logs. Through the simulation we know the seismoelectric logs can avoid the interference of drill collar wave. This paper also provides theoretical guidance for the design of receiving antenna.

Face logging in Copenhagen Limestone, Denmark

DEFF Research Database (Denmark)

Jakobsen, Lisa; Foged, Niels Nielsen; Erichsen, Lars

2015-01-01

tunnel in Copenhagen more than 2.5 km face logs were made in 467 locations at underground stations, shafts, caverns and along bored tunnels. Over 160 geotechnical boreholes, many with geophysical logging were executed prior to construction works. The bedrock consists of Paleogene "Copenhagen limestone......The requirement for excavation support can be assessed from face logging. Face logs can also improve our knowledge of lithological and structural conditions within bedrock and supplement information from boreholes and geophysical logs. During the construction of 8 km metro tunnel and 4 km heating....... The induration degrees recorded in face logs and boreholes are compared and correlated. Distinct geophysical log markers are used to divide the limestone into three units. These marker horizons are correlated between face logs and geotechnical boreholes. A 3D model of the strength variations recorded within...

Integration of Adaptive Neuro-Fuzzy Inference System, Neural Networks and Geostatistical Methods for Fracture Density Modeling

Directory of Open Access Journals (Sweden)

Ja’fari A.

2014-01-01

Full Text Available Image logs provide useful information for fracture study in naturally fractured reservoir. Fracture dip, azimuth, aperture and fracture density can be obtained from image logs and have great importance in naturally fractured reservoir characterization. Imaging all fractured parts of hydrocarbon reservoirs and interpreting the results is expensive and time consuming. In this study, an improved method to make a quantitative correlation between fracture densities obtained from image logs and conventional well log data by integration of different artificial intelligence systems was proposed. The proposed method combines the results of Adaptive Neuro-Fuzzy Inference System (ANFIS and Neural Networks (NN algorithms for overall estimation of fracture density from conventional well log data. A simple averaging method was used to obtain a better result by combining results of ANFIS and NN. The algorithm applied on other wells of the field to obtain fracture density. In order to model the fracture density in the reservoir, we used variography and sequential simulation algorithms like Sequential Indicator Simulation (SIS and Truncated Gaussian Simulation (TGS. The overall algorithm applied to Asmari reservoir one of the SW Iranian oil fields. Histogram analysis applied to control the quality of the obtained models. Results of this study show that for higher number of fracture facies the TGS algorithm works better than SIS but in small number of fracture facies both algorithms provide approximately same results.

Elasticity and Density of Paleozoic Shales from Bornholm

DEFF Research Database (Denmark)

Fabricius, Ida Lykke; Haugwitz, C.; Larsen, Pernille Birkelund

2017-01-01

Darcy. We found that solid density and elastic stiffness parameters only vary insignificantly with solid composition, when TOC is lower than 5%, but that mass density and TOC are correlated when TOC is higher than 5%. A similar correlation was not seen for TOC and Sonic logging data. A reason can...

Value of NMR logging for heavy oil characterization

Energy Technology Data Exchange (ETDEWEB)

Chen, S.; Chen, J.; Georgi, D. [Baker Hughes, Calgary, AB (Canada); Sun, B. [Chevron Energy Technology Co., Calgary, AB (Canada)

2008-07-01

Non-conventional, heavy oil fields are becoming increasingly important to the security of energy supplies and are becoming economically profitable to produce. Heavy oil reservoirs are difficult to evaluate since they are typically shallow and the connate waters are very fresh. Other heavy oil reservoirs are oil-wet where the resistivities are not indicative of saturation. Nuclear magnetic resonance (NMR) detects molecular level interactions. As such, it responds distinctively to different hydrocarbon molecules, thereby opening a new avenue for constituent analysis. This feature makes NMR a more powerful technique than bulk oil density or viscosity measurements for characterizing oils, and is the basis for detecting gas in heavy oil fields. NMR logging, which measures fluid in pore space directly, is capable of separating oil from water. It is possible to discern movable from bound water by analyzing NMR logs. The oil viscosity can be also quantified from NMR logs, NMR relaxation time and diffusivity estimates. The unique challenges for heavy oil reservoir characterization for the NMR technique were discussed with reference to the extra-fast decay of the NMR signal in response to extra-heavy oil/tars, and the lack of sensitivity in measuring very slow diffusion of heavy oil molecules. This paper presented various methods for analyzing heavy oil reservoirs in different viscosity ranges. Heavy oil fields in Venezuela, Kazakhstan, Canada, Alaska and the Middle East were analyzed using different data interpretation approaches based on the reservoir formation characteristics and the heavy oil type. NMR direct fluid typing was adequate for clean sands and carbonate reservoirs while integrated approaches were used to interpret extra heavy oils and tars. It was concluded that NMR logs can provide quantitative measures for heavy oil saturation, identify sweet spots or tar streaks, and quantify heavy oil viscosity within reasonable accuracy. 14 refs., 16 figs.

Log4J

CERN Document Server

Perry, Steven

2009-01-01

Log4j has been around for a while now, and it seems like so many applications use it. I've used it in my applications for years now, and I'll bet you have too. But every time I need to do something with log4j I've never done before I find myself searching for examples of how to do whatever that is, and I don't usually have much luck. I believe the reason for this is that there is a not a great deal of useful information about log4j, either in print or on the Internet. The information is too simple to be of real-world use, too complicated to be distilled quickly (which is what most developers

Unsupervised signature extraction from forensic logs

NARCIS (Netherlands)

Thaler, S.M.; Menkovski, V.; Petkovic, M.; Altun, Y.; Das, K.; Mielikäinen, T.; Malerba, D.; Stefanowski, J.; Read, J.; Žitnik, M.; Ceci, M.

2017-01-01

Signature extraction is a key part of forensic log analysis. It involves recognizing patterns in log lines such that log lines that originated from the same line of code are grouped together. A log signature consists of immutable parts and mutable parts. The immutable parts define the signature, and

Log-balanced combinatorial sequences

Directory of Open Access Journals (Sweden)

Tomislav Došlic

2005-01-01

Full Text Available We consider log-convex sequences that satisfy an additional constraint imposed on their rate of growth. We call such sequences log-balanced. It is shown that all such sequences satisfy a pair of double inequalities. Sufficient conditions for log-balancedness are given for the case when the sequence satisfies a two- (or more- term linear recurrence. It is shown that many combinatorially interesting sequences belong to this class, and, as a consequence, that the above-mentioned double inequalities are valid for all of them.

LOG2MARKUP: State module to transform a Stata text log into a markup document

DEFF Research Database (Denmark)

2016-01-01

log2markup extract parts of the text version from the Stata log command and transform the logfile into a markup based document with the same name, but with extension markup (or otherwise specified in option extension) instead of log. The author usually uses markdown for writing documents. However...

Long-term impacts of selective logging on two Amazonian tree species with contrasting ecological and reproductive characteristics: inferences from Eco-gene model simulations.

Science.gov (United States)

Vinson, C C; Kanashiro, M; Sebbenn, A M; Williams, T C R; Harris, S A; Boshier, D H

2015-08-01

The impact of logging and subsequent recovery after logging is predicted to vary depending on specific life history traits of the logged species. The Eco-gene simulation model was used to evaluate the long-term impacts of selective logging over 300 years on two contrasting Brazilian Amazon tree species, Dipteryx odorata and Jacaranda copaia. D. odorata (Leguminosae), a slow growing climax tree, occurs at very low densities, whereas J. copaia (Bignoniaceae) is a fast growing pioneer tree that occurs at high densities. Microsatellite multilocus genotypes of the pre-logging populations were used as data inputs for the Eco-gene model and post-logging genetic data was used to verify the output from the simulations. Overall, under current Brazilian forest management regulations, there were neither short nor long-term impacts on J. copaia. By contrast, D. odorata cannot be sustainably logged under current regulations, a sustainable scenario was achieved by increasing the minimum cutting diameter at breast height from 50 to 100 cm over 30-year logging cycles. Genetic parameters were only slightly affected by selective logging, with reductions in the numbers of alleles and single genotypes. In the short term, the loss of alleles seen in J. copaia simulations was the same as in real data, whereas fewer alleles were lost in D. odorata simulations than in the field. The different impacts and periods of recovery for each species support the idea that ecological and genetic information are essential at species, ecological guild or reproductive group levels to help derive sustainable management scenarios for tropical forests.

Non-destructive analysis and detection of internal characteristics of spruce logs through X computerized tomography

International Nuclear Information System (INIS)

Longuetaud, F.

2005-10-01

Computerized tomography allows a direct access to internal features of scanned logs on the basis of density and moisture content variations. The objective of this work is to assess the feasibility of an automatic detection of internal characteristics with the final aim of conducting scientific analyses. The database is constituted by CT images of 24 spruces obtained with a medical CT scanner. Studied trees are representative of several social status and are coming from four stands located in North-Eastern France, themselves are representative of several age, density and fertility classes. The automatic processing developed are the following. First, pith detection in logs dealing with the problem of knot presence and ring eccentricity. The accuracy of the localisation was less than one mm. Secondly, the detection of the sapwood/heart-wood limit in logs dealing with the problem of knot presence (main source of difficulty). The error on the diameter was 1.8 mm which corresponds to a relative error of 1.3 per cent. Thirdly, the detection of the whorls location and comparison with an optical method. Fourthly the detection of individualized knots. This process allows to count knots and to locate them in a log (longitudinal position and azimuth); however, the validation of the method and extraction of branch diameter and inclination are still to be developed. An application of this work was a variability analysis of the sapwood content in the trunk: at the within-tree level, the sapwood width was found to be constant under the living crown; at the between-tree level, a strong correlation was found with the amount of living branches. A great number of analyses are possible from our work results, among others: architectural analysis with the pith tracking and the apex death occurrence; analysis of radial variations of the heart-wood shape; analysis of the knot distribution in logs. (author)

Interpretation of geophysical well-log measurements in drill hole UE25a-1, Nevada Test Site, Radioactive Waste Program

International Nuclear Information System (INIS)

Hagstrum, J.T.; Daniels, J.J.; Scott, J.H.

1980-01-01

An exploratory hole (UE25a-1) was drilled at Nevada Test Site (NTS) to determine the suitability of pyroclastic deposits as storage sites for radioactive waste. Studies have been conducted to investigate the stratigraphy, structure, mineralogy, petrology, and physical properties of the tuff units encountered in the drill hole. This report deals with the interpretation of physical properties for the tuff units from geophysical well-log measurements. The ash-flow and bedded tuff sequences at NTS comprise complex lithologies of variously welded tuffs with superimposed crystallization and altered zones. To characterize these units, resistivity, density, neutron, gamma-ray, induced polarization, and magnetic susceptibility geophysical well-log measurements were made. Although inherently subjective, a consistent interpretation of the well-log measurements was facilitated by a computer program designed to interpret well logs either individually or simultaneously. The broad features of the welded tuff units are readily distinguished by the geophysical well-log measurements. However, many details revealed by the logs indicate that more work is necessary to clarify the casual elements of well-log response in welded tuffs

Radiometric well logging instruments

International Nuclear Information System (INIS)

Davydov, A.V.

1975-01-01

The technical properties of well instruments for radioactive logging used in the radiometric logging complexes PKS-1000-1 (''Sond-1'') and PRKS-2 (''Vitok-2'') are described. The main features of the electric circuit of the measuring channels are given

Hardwood log supply: a broader perspective

Science.gov (United States)

Iris Montague; Adri Andersch; Jan Wiedenbeck; Urs. Buehlmann

2015-01-01

At regional and state meetings we talk with others in our business about the problems we face: log exports, log quality, log markets, logger shortages, cash flow problems, the weather. These are familiar talking points and real and persistent problems. But what is the relative importance of these problems for log procurement in different regions of...

Log evaluation of sub-bituminous coals in Magallanes, Chile

International Nuclear Information System (INIS)

Weltz, L.S.

1976-01-01

In coal exploration a drilling program is normally used for coal inquest through core analysis, with a high cost and operating time. However, in many cases, there is poor cores recovery due to operating procedures and/or formation conditions which leads to the determination of parameters non-representative of the coal seam. The cost and operating time can be minimized through the use of logs which also represent a continuous and in situ sampling. In the case of sub-bituminous coals, the analysis through logs is more complex due to the high content of clay, which masks the presence of water. This paper describes the analysis of sub-bituminous coals in Magallanes-Chile. The main coal seam components are: coal, clay, secondary quartz and water. An interpretation system using the density log, gamma ray, sonic and microlog, based on rho/sub B/-GR and rho/sub B/--Δ/sub T/ cross plots, permits to know the weight percentages of the following elements: total carbon, ash, moisture, which form the main local coal parameters. Empirical relationships permit us to obtain also the heating value and an estimate strength index to elastic-dynamic forces. The results obtained agree within 3 percent with the Laboratory cores analysis. The method is processed through a sequence of simple computer programs for IBM-360

Semi-automatic logarithmic converter of logs

International Nuclear Information System (INIS)

Gol'dman, Z.A.; Bondar's, V.V.

1974-01-01

Semi-automatic logarithmic converter of logging charts. An original semi-automatic converter was developed for use in converting BK resistance logging charts and the time interval, ΔT, of acoustic logs from a linear to a logarithmic scale with a specific ratio for subsequent combining of them with neutron-gamma logging charts in operative interpretation of logging materials by a normalization method. The converter can be used to increase productivity by giving curves different from those obtained in manual, pointwise processing. The equipment operates reliably and is simple in use. (author)

Power to the logs!

CERN Multimedia

CERN. Geneva; MACMAHON, Joseph

2015-01-01

Are you tired of using grep, vi and emacs to read your logs? Do you feel like you’re missing the big picture? Does the word "statistics" put a smile on your face? Then it’s time to give power to the logs!

Basalt identification by interpreting nuclear and electrical well logging measurements using fuzzy technique (case study from southern Syria)

International Nuclear Information System (INIS)

Asfahani, J.; Abdul Ghani, B.; Ahmad, Z.

2015-01-01

Fuzzy analysis technique is proposed in this research for interpreting the combination of nuclear and electrical well logging data, which include natural gamma ray, density and neutron-porosity, while the electrical well logging include long and short normal. The main objective of this work is to describe, characterize and establish the lithology of the large extended basaltic areas in southern Syria. Kodana well logging measurements have been used and interpreted for testing and applying the proposed technique. The established lithological cross section shows the distribution and the identification of four kinds of basalt, which are hard massive basalt, hard basalt, pyroclastic basalt and the alteration basalt products, clay. The fuzzy analysis technique is successfully applied on the Kodana well logging data, and can be therefore utilized as a powerful tool for interpreting huge well logging data with higher number of variables required for lithological estimations. - Highlights: • Apply fuzzy analysis technique on the nuclear and electrical well logging data of Kodana well in Southern Syria. • Determine and differentiate between four kinds of basalt. • Establish the lithological section of the studied well.

Preliminary analysis of geophysical logs from drill hole UE-25p No. 1, Yucca Mountain, Nye County, Nevada

International Nuclear Information System (INIS)

Muller, D.C.; Kibler, J.E.

1984-01-01

Geophysical logs from drill hole UE-25p No. 1 correlate well with logs through the same geologic units from other drill holes at Yucca Mountain, Nevada. The in-situ physical properties of the rocks as determined from well logs are consistent with laboratory-measured physical properties of core from other drill holes. The density, neutron and caliper logs are very spiky through most of the Topopah Spring Member. This spikiness occurs on the same logs in cored holes where the Topopah Spring Member is highly fractured and lithophysal. The uranium channel of the spectral gamma-ray log through the Topopah Spring Member correlates with uranium logs from cored holes where most of the fractures have not been healed or filled with materials that concentrate uranium. Therefore, fracture porosity and permeability of the Topopah Spring Member are expected to be high and consistent with fracture analysis from other drill holes on Yucca Mountain, and hydrologic tests from well J-13. The Paleozoic dolomites which underlie the Tertiary tuffs are intensely brecciated, and the uranium count rate is much higher than normal for dolomites because uranium has been concentrated in the recementing material. 19 references, 1 figure, 2 tables

32 CFR 700.846 - Status of logs.

Science.gov (United States)

2010-07-01

... Officers Afloat § 700.846 Status of logs. The deck log, the engineering log, the compass record, the bearing hooks, the engineer's bell book, and any records generated by automated data logging equipment...

Palm distributions for log Gaussian Cox processes

DEFF Research Database (Denmark)

Coeurjolly, Jean-Francois; Møller, Jesper; Waagepetersen, Rasmus Plenge

2017-01-01

This paper establishes a remarkable result regarding Palm distributions for a log Gaussian Cox process: the reduced Palm distribution for a log Gaussian Cox process is itself a log Gaussian Cox process that only differs from the original log Gaussian Cox process in the intensity function. This new...... result is used to study functional summaries for log Gaussian Cox processes....

Systematic logging utilizing a log sheet designed for drill core descriptions. An example in uranium exploration activities

International Nuclear Information System (INIS)

Sasao, Eiji; Tsuruta, Tadahiko; Iida, Yoshimasa

2000-01-01

We describe the log sheets used during uranium exploration activities for unconformity-related uranium deposits by JNC. The purpose of using the logging sheets is to standardize the objects which all geologists must observe and for data quality assurance. The log sheets are a three-part set describing basement lithology, sandstone lithology and geotechnics. We devised our own log sheets to describe both the sandstone and the underlying basement rock when we started exploration in Athabasca Basin, Canada. We modified the sheets to gain a better understanding of the geological features related to uranium mineralization, and made final improvements to satisfy required quality based on the criteria of descriptive objects and accuracy. Use of the log sheets resulted in effective performance of core logging and improvement in the display of data. (author)

Log-binomial models: exploring failed convergence.

Science.gov (United States)

Williamson, Tyler; Eliasziw, Misha; Fick, Gordon Hilton

2013-12-13

Relative risk is a summary metric that is commonly used in epidemiological investigations. Increasingly, epidemiologists are using log-binomial models to study the impact of a set of predictor variables on a single binary outcome, as they naturally offer relative risks. However, standard statistical software may report failed convergence when attempting to fit log-binomial models in certain settings. The methods that have been proposed in the literature for dealing with failed convergence use approximate solutions to avoid the issue. This research looks directly at the log-likelihood function for the simplest log-binomial model where failed convergence has been observed, a model with a single linear predictor with three levels. The possible causes of failed convergence are explored and potential solutions are presented for some cases. Among the principal causes is a failure of the fitting algorithm to converge despite the log-likelihood function having a single finite maximum. Despite these limitations, log-binomial models are a viable option for epidemiologists wishing to describe the relationship between a set of predictors and a binary outcome where relative risk is the desired summary measure. Epidemiologists are encouraged to continue to use log-binomial models and advocate for improvements to the fitting algorithms to promote the widespread use of log-binomial models.

Comparative analysis of nuclear magnetic resonance well logging and nuclear magnetic resonance mud logging

International Nuclear Information System (INIS)

Yuan Zugui

2008-01-01

The hydrogen atoms in oil and water are able to resonate and generate signals in the magnetic field, which is used by the NMR (nuclear magnetic resonance) technology in petroleum engineering to research and evaluate rock characteristics. NMR well logging was used to measure the physical property parameters of the strata in well bore, whereas NMR mud logging was used to analyze (while drilling) the physical property parameters of cores, cuttings and sidewall coring samples on surface (drilling site). Based on the comparative analysis of the porosity and permeability parameters obtained by NMR well logging and those from analysis of the cores, cuttings and sidewall coring samples by NMR mud logging in the same depth of 13 wells, these two methods are of certain difference, but their integral tendency is relatively good. (authors)

DOE-Grand Junction logging model data synopsis

International Nuclear Information System (INIS)

Mathews, M.A.; Koizumi, C.J.; Evans, H.B.

1978-05-01

This synopsis provides the available data concerning the logging models at the DoE-Grand Junction facility, to date (1976). Because gamma-ray logs are used in uranium exploration to estimate the grade (percent U 3 O 8 ) and the thickness of uranium ore zones in exploration drill holes, logging models are required to calibrate the gamma-ray logging equipment in order to obtain accuracy, uniformity, standardization, and repeatability during logging. This quality control is essential for accurate ore reserve calculations and for estimates of ore potential. The logging models at the DoE-Grand Junction facility are available for use by private industry in calibrating their gamma-ray logging equipment. 21 figures, 26 tables

SNG-logs at Skjern

DEFF Research Database (Denmark)

Korsbech, Uffe C C; Petersen, Jesper; Aage, Helle Karina

1998-01-01

Spectral Natural Gamma-ray logs have been run in two water supply borings at Skjern. The log data have been examined by a new technique - Noise Adjusted Singular Value Decomposition - in order to get a detailed and reliable picture of the distribution of uranium and thorium gamma-rays from heavy...

Drivers of aboveground wood production in a lowland tropical forest of West Africa: teasing apart the roles of tree density, tree diversity, soil phosphorus, and historical logging.

Science.gov (United States)

Jucker, Tommaso; Sanchez, Aida Cuni; Lindsell, Jeremy A; Allen, Harriet D; Amable, Gabriel S; Coomes, David A

2016-06-01

Tropical forests currently play a key role in regulating the terrestrial carbon cycle and abating climate change by storing carbon in wood. However, there remains considerable uncertainty as to whether tropical forests will continue to act as carbon sinks in the face of increased pressure from expanding human activities. Consequently, understanding what drives productivity in tropical forests is critical. We used permanent forest plot data from the Gola Rainforest National Park (Sierra Leone) - one of the largest tracts of intact tropical moist forest in West Africa - to explore how (1) stand basal area and tree diversity, (2) past disturbance associated with past logging, and (3) underlying soil nutrient gradients interact to determine rates of aboveground wood production (AWP). We started by statistically modeling the diameter growth of individual trees and used these models to estimate AWP for 142 permanent forest plots. We then used structural equation modeling to explore the direct and indirect pathways which shape rates of AWP. Across the plot network, stand basal area emerged as the strongest determinant of AWP, with densely packed stands exhibiting the fastest rates of AWP. In addition to stand packing density, both tree diversity and soil phosphorus content were also positively related to productivity. By contrast, historical logging activities negatively impacted AWP through the removal of large trees, which contributed disproportionately to productivity. Understanding what determines variation in wood production across tropical forest landscapes requires accounting for multiple interacting drivers - with stand structure, tree diversity, and soil nutrients all playing a key role. Importantly, our results also indicate that logging activities can have a long-lasting impact on a forest's ability to sequester and store carbon, emphasizing the importance of safeguarding old-growth tropical forests.

Influence of borehole-eccentred tools on wireline and logging-while-drilling sonic logging measurements

KAUST Repository

Pardo, David; Matuszyk, Paweł Jerzy; Torres-Verdí n, Carlos; Mora Cordova, Angel; Muga, Ignacio; Calo, Victor M.

2013-01-01

We describe a numerical study to quantify the influence of tool-eccentricity on wireline (WL) and logging-while-drilling (LWD) sonic logging measurements. Simulations are performed with a height-polynomial-adaptive (hp) Fourier finite-element method

Impacts of Unsustainable Mahogany Logging in Bolivia and Peru

Directory of Open Access Journals (Sweden)

Roberto F. Kometter

2004-06-01

Full Text Available Although bigleaf mahogany [Swietenia macrophylla King (Meliaceae] is the premier timber species of Latin America, its exploitation is unsustainable because of a pattern of local depletion and shifting supply. We surveyed experts on the status of mahogany in Bolivia and Peru, the world's past and present largest exporters. Bolivia no longer has commercially viable mahogany (trees > 60 cm diameter at breast height across 79% of its range. In Peru, mahogany's range has shrunk by 50%, and, within a decade, a further 28% will be logged out. Approximately 15% of the mahogany range in these two countries is protected, but low densities and illegal logging mean that this overestimates the extent of mahogany under protection. The international community can support mahogany conservation by funding park management and by encouraging independent verification of the legality of mahogany in trade. Our findings demonstrate that a systematic expert survey can generate reliable and cost-effective information on the status of widespread species of concern and help to inform appropriate management policy.

Nuclear well logging in hydrology

International Nuclear Information System (INIS)

1971-01-01

The optimum development of regional and local groundwater resources requires a quantitative evaluation of its aquifers and aquicludes, and of the physical and chemical properties relevant to the recharge to and withdrawal of water from them. If an understanding of the groundwater regime is to be obtained, geological observations at outcrop must be augmented by subsurface measurements of the strata and the waters they contain. Measurements of many hydrological and geological parameters can be made in situ by nuclear geophysical well-logging methods. Very simply, well logging consists of lowering a measuring probe into a well and making a continuous record of the variations of a particular parameter with depth. In most circumstances, repetition of the measurements under differing hydrodynamic conditions results in a better definition of the flow regime in the aquifer. Nuclear well-logging techniques have for some years been capable of solving a number of the sub-surface measurement problems faced by hydrogeologists. However, the present usage of these methods varies from country to country and the literature concerning applications is scattered in the professional journals of several disciplines. The objective of this report is to include in a single reference volume descriptions of the physical principles of nuclear logging methods, their applications to hydrogeological problems and their limitations on a level suitable for the practising hydrologists with a limited knowledge of nuclear physics. The Working Group responsible for compiling the report recommended that it should cover a broad spectrum of hydrogeological investigations and problems. For example, it saw no valid reason to distinguish for the purposes of the report between well-logging applications for water-supply purposes and for water-flooding studies in the petroleum industry. Neutron measurements made for soil-moisture determinations in the unsaturated zone have been specifically omitted, however, as

Calculation of Monte Carlo importance functions for use in nuclear-well logging calculations

International Nuclear Information System (INIS)

Soran, P.D.; McKeon, D.C.; Booth, T.E.

1989-07-01

Importance sampling is essential to the timely solution of Monte Carlo nuclear-logging computer simulations. Achieving minimum variance (maximum precision) of a response in minimum computation time is one criteria for the choice of an importance function. Various methods for calculating importance functions will be presented, new methods investigated, and comparisons with porosity and density tools will be shown. 5 refs., 1 tab

A Universal Logging System for LHCb Online

International Nuclear Information System (INIS)

Nikolaidis, Fotis; Brarda, Loic; Garnier, Jean-Christophe; Neufeld, Niko

2011-01-01

A log is recording of system's activity, aimed to help system administrator to traceback an attack, find the causes of a malfunction and generally with troubleshooting. The fact that logs are the only information an administrator may have for an incident, makes logging system a crucial part of an IT infrastructure. In large scale infrastructures, such as LHCb Online, where quite a few GB of logs are produced daily, it is impossible for a human to review all of these logs. Moreover, a great percentage of them as just n oise . That makes clear that a more automated and sophisticated approach is needed. In this paper, we present a low-cost centralized logging system which allow us to do in-depth analysis of every log.

Model wells for nuclear well logging

International Nuclear Information System (INIS)

Tittle, C.W.

1989-01-01

Considerations needed in the design and construction of model wells for nuclear log calibration are covered, with special attention to neutron porosity logging and total γ-ray logging. Pulsed neutron decay-time and spectral γ-ray logging are discussed briefly. The American Petroleum Institute calibration facility for nuclear logs is a good starting point for similar or expanded facilities. A few of its shortcomings are mentioned; they are minor. The problem of fluid saturation is emphasized. Attention is given to models made of consolidated rock and those containing unconsolidated material such as Ottawa sand. Needed precautions are listed. A similarity method is presented for estimating the porosity index of formations that are not fully saturated. (author)

Nonuniversal critical behaviour in a model for charge density wave dynamics

International Nuclear Information System (INIS)

Ritala, R.K.; Hertz, J.A.

1986-02-01

We have studied short range fluctuations around the infinite-range model of charge density wave (CDW) dynamics. We find that the inhomogeneity of the local field, which is neglected in the infinite-range approximation has a dramatic effect on the transition. In the Bethe approximation the critical behaviour is nonuniversal. In particular, the current exponent is ζ = 3/2 log(z-1)/[log(z)]+log(1+f/J)], where z is the number of neighbors, f the pinning strength, and J the elastic coupling. (orig.)

Prediction of thermal conductivity of sedimentary rocks from well logs

DEFF Research Database (Denmark)

Fuchs, Sven; Förster, Andrea

2014-01-01

The calculation of heat-flow density in boreholes requires reliable values for the change of temperature and rock thermal conductivity with depth. As rock samples for laboratory measurements of thermal conductivity (TC) are usually rare geophysical well logs are used alternatively to determine TC...... parameters (i.e. thermal conductivity, density, hydrogen index, sonic interval transit time, gamma-ray response, photoelectric factor) of artificial mineral assemblages consisting 15 rock-forming minerals that are used in different combinations to typify sedimentary rocks. The predictive capacity of the new...... equations is evaluated on subsurface data from four boreholes drilled into the Mesozoic sequence of the North German Basin, including more than 1700 laboratory-measured thermal-conductivity values. Results are compared with those from other approaches published in the past. The new approach predicts TC...

Artificial intelligence approach to interwell log correlation

Energy Technology Data Exchange (ETDEWEB)

Lim, Jong-Se [Korea Maritime University, Pusan(Korea); Kang, Joo Myung [Seoul National University, Seoul(Korea); Kim, Jung Whan [Korea National Oil Corp., Anyang(Korea)

2000-04-30

This paper describes a new approach to automated interwell log correlation using artificial intelligence and principal component analysis. The approach to correlate wire line logging data is on the basis of a large set of subjective rules that are intended to represent human logical processes. The data processed are mainly the qualitative information such as the characteristics of the shapes extracted along log traces. The apparent geologic zones are identified by pattern recognition for the specific characteristics of log trace collected as a set of objects by object oriented programming. The correlation of zones between wells is made by rule-based inference program. The reliable correlation can be established from the first principal component logs derived from both the important information around well bore and the largest common part of variances of all available well log data. Correlation with field log data shows that this approach can make interwell log correlation more reliable and accurate. (author). 6 refs., 7 figs.

The effects of variability on the number-flux-density relationship for radio sources

International Nuclear Information System (INIS)

Schuch, N.J.

1981-01-01

It has been known for some time that the number-flux-density relationship for radio sources requires a population of sources whose properties evolve with cosmological epoch, at least in models where the redshifts are all taken to be cosmological. In particular, the surveys made at metre wavelengths show, for bright sources, a slope of the log N -log S curve which is steeper than the value -1.5 expected in a static, non-evolving Euclidean universe. Here, N is the number of radio sources brighter than flux density S. Expansion without evolution in conventional geometrical models predicts slopes flatter than -1.5. If the radio survey is carried out at higher frequencies (typically 2.7 or 5 GHz - 11 or 6 cm wavelength), the slope of the log N -log S curve is steeper than -1.5 but not so steep as the slopes found for the low-frequency surveys. Many of the sources found in high-frequency surveys have radio spectra with relatively higher flux-densities in the centimetre range; these sources are frequently variable at high frequencies, with time-scales from a month or two upwards. Some possible effects of the variations on the observed counts of radio sources are considered. (author)

Nondestructive evaluation for sorting red maple logs

Science.gov (United States)

Xiping Wang; Robert J. Ross; David W. Green; Karl Englund; Michael Wolcott

2000-01-01

Existing log grading procedures in the United States make only visual assessments of log quality. These procedures do not incorporate estimates of the modulus of elasticity (MOE) of logs. It is questionable whether the visual grading procedures currently used for logs adequately assess the potential quality of structural products manufactured from them, especially...

SNG-logs at the Bagsvaerd Lake

International Nuclear Information System (INIS)

Korsbech, U.

1992-11-01

Spectral Natural Gamma-logs (SNG) were taken in old boreholes around Bagsvaerd Lake (Zealand). The purpose of this investigation was to clarify the geologic/lithologic conditions in this region and the potential risks of waste penetration into ground water. Relationship curves for thorium, uranium and potassium concentrations are given. Some special logs which can be useful for evaluating concentration variations or transition forms among various lithological layers are collected. Appendices contain technical information on the boreholes and discussion of differences between results of SNG-logging and the conventional gamma-logging. (EG)

Well logging, atom and geology

International Nuclear Information System (INIS)

Serra, O.

1994-01-01

Well logging techniques exploit interactions of gamma photons and neutrons with atoms. Interactions of neutrons of different energies with atoms allow the detection and evaluation of the weight percentage of several elements composing the rocks (C, O, Si, Ca, Fe, S); spectrometry of gamma rays produced by thermal neutron absorption allows for the weight percentage determination of Si, Ca, Fe, S, Cl, H, Ti and Gd, etc. High resolution detectors (germanium doped by Li, at liquid nitrogen temperature) allow the recognition of more elements. Other techniques involving neutrons consist in determining the population in epithermal neutrons at a certain distance of the neutron source (measurement of the hydrogen index). By analyzing the intensity of the gamma flux produced by Compton scattering, the electronic and bulk densities of the rocks are measured. All these data lead to the detection and evaluation of ore deposits (uranium and potassium) and coal, and determination of the lithology, the main minerals composing the rocks, petrophysical properties... 1 fig

LHCb Online Log Analysis and Maintenance System

CERN Document Server

Garnier, J-C

2011-01-01

History has shown, many times computer logs are the only information an administrator may have for an incident, which could be caused either by a malfunction or an attack. Due to the huge amount of logs that are produced from large-scale IT infrastructures, such as LHCb Online, critical information may be overlooked or simply be drowned in a sea of other messages. This clearly demonstrates the need for an automatic system for long-term maintenance and real time analysis of the logs. We have constructed a low cost, fault tolerant centralized logging system which is able to do in-depth analysis and cross-correlation of every log. This system is capable of handling O(10000) different log sources and numerous formats, while trying to keep the overhead as low as possible. It provides log gathering and management, Offline analysis and online analysis. We call Offline analysis the procedure of analyzing old logs for critical information, while Online analysis refer to the procedure of early alerting and reacting. ...

Drilling, construction, geophysical log data, and lithologic log for boreholes USGS 142 and USGS 142A, Idaho National Laboratory, Idaho

Science.gov (United States)

Twining, Brian V.; Hodges, Mary K.V.; Schusler, Kyle; Mudge, Christopher

2017-07-27

ranged in thickness from about 2 to 100 ft and varied from highly fractured to dense, and ranged from massive to diktytaxitic to scoriaceous, in texture.Geophysical logs were collected on completion of drilling at boreholes USGS 142 and USGS 142A. Geophysical logs were examined with available core material to describe basalt, sediment and sedimentary rock layers, and rhyolite. Natural gamma logs were used to confirm sediment layer thickness and location; neutron logs were used to examine basalt flow units and changes in hydrogen content; gamma-gamma density logs were used to describe general changes in rock properties; and temperature logs were used to understand hydraulic gradients for deeper sections of borehole USGS 142. Gyroscopic deviation was measured to record deviation from true vertical at all depths in boreholes USGS 142 and USGS 142A.

Log-Log Convexity of Type-Token Growth in Zipf's Systems

Science.gov (United States)

Font-Clos, Francesc; Corral, Álvaro

2015-06-01

It is traditionally assumed that Zipf's law implies the power-law growth of the number of different elements with the total number of elements in a system—the so-called Heaps' law. We show that a careful definition of Zipf's law leads to the violation of Heaps' law in random systems, with growth curves that have a convex shape in log-log scale. These curves fulfill universal data collapse that only depends on the value of Zipf's exponent. We observe that real books behave very much in the same way as random systems, despite the presence of burstiness in word occurrence. We advance an explanation for this unexpected correspondence.

Geophysical borehole logging

International Nuclear Information System (INIS)

McCann, D.; Barton, K.J.; Hearn, K.

1981-08-01

Most of the available literature on geophysical borehole logging refers to studies carried out in sedimentary rocks. It is only in recent years that any great interest has been shown in geophysical logging in boreholes in metamorphic and igneous rocks following the development of research programmes associated with geothermal energy and nuclear waste disposal. This report is concerned with the programme of geophysical logging carried out on the three deep boreholes at Altnabreac, Caithness, to examine the effectiveness of these methods in crystalline rock. Of particular importance is the assessment of the performance of the various geophysical sondes run in the boreholes in relation to the rock mass properties. The geophysical data can be used to provide additional in-situ information on the geological, hydrogeological and engineering properties of the rock mass. Fracturing and weathering in the rock mass have a considerable effect on both the design parameters for an engineering structure and the flow of water through the rock mass; hence, the relation between the geophysical properties and the degree of fracturing and weathering is examined in some detail. (author)

Selective logging in the Brazilian Amazon.

Science.gov (United States)

G. P. Asner; D. E. Knapp; E. N. Broadbent; P. J. C. Oliveira; M Keller; J. N. Silva

2005-01-01

Amazon deforestation has been measured by remote sensing for three decades. In comparison, selective logging has been mostly invisible to satellites. We developed a large-scale, high-resolution, automated remote-sensing analysis of selective logging in the top five timber-producing states of the Brazilian Amazon. Logged areas ranged from 12,075 to 19,823 square...

Linking log quality with product performance

Science.gov (United States)

D. W. Green; Robert Ross

1997-01-01

In the United States, log grading procedures use visual assessment of defects, in relation to the log scaling diameter, to estimate the yield of lumber that maybe expected from the log. This procedure was satisfactory when structural grades were based only on defect size and location. In recent years, however, structural products have increasingly been graded using a...

Logística del transporte

OpenAIRE

Robusté Antón, Francesc

2005-01-01

La logística se ha conformado como un proceso estratégico para organizar las actividades de producción y de distribución de las empresas. El concepto de sistema logístico ha incluido un amplio espectro de operaciones que condicionan la eficiencia y la competitividad empresarial en el actual contexto de globalización de la economía. En este sentido, este libro afronta y analiza los distintos aspectos que inciden en los procesos de planificación y gestión de los procesos logísticos relacionados...

Engineering aspects of radiometric logging

International Nuclear Information System (INIS)

Huppert, P.

1982-01-01

Engineering problems encountered in the development of nuclear borehole logging techniques are discussed. Spectrometric techniques require electronic stability of the equipment. In addition the electronics must be capable of handling high count rates of randomly distributed pulses of fast rise time from the detector and the systems must be designed so that precise calibration is possible under field operating conditions. Components of a logging system are discussed in detail. They include the logging probe (electronics, detector, high voltage supply, preamplifier), electronic instrumentation for data collection and processing and auxiliary equipment

Impact of selective logging on inbreeding and gene dispersal in an Amazonian tree population of Carapa guianensis Aubl.

Science.gov (United States)

Cloutier, D; Kanashiro, M; Ciampi, A Y; Schoen, D J

2007-02-01

Selective logging may impact patterns of genetic diversity within populations of harvested forest tree species by increasing distances separating conspecific trees, and modifying physical and biotic features of the forest habitat. We measured levels of gene diversity, inbreeding, pollen dispersal and spatial genetic structure (SGS) of an Amazonian insect-pollinated Carapa guianensis population before and after commercial selective logging. Similar levels of gene diversity and allelic richness were found before and after logging in both the adult and the seed generations. Pre- and post-harvest outcrossing rates were high, and not significantly different from one another. We found no significant levels of biparental inbreeding either before or after logging. Low levels of pollen pool differentiation were found, and the pre- vs. post-harvest difference was not significant. Pollen dispersal distance estimates averaged between 75 m and 265 m before logging, and between 76 m and 268 m after logging, depending on the value of tree density and the dispersal model used. There were weak and similar levels of differentiation of allele frequencies in the adults and in the pollen pool, before and after logging occurred, as well as weak and similar pre- and post-harvest levels of SGS among adult trees. The large neighbourhood sizes estimated suggest high historical levels of gene flow. Overall our results indicate that there is no clear short-term genetic impact of selective logging on this population of C. guianensis.

Data logging system upgrade for Indus accelerator

International Nuclear Information System (INIS)

Mishra, R.; Merh, B.N.; Agrawal, R.K.; Fatnani, P.; Navathe, C.P.; Pal, S.

2012-01-01

An accelerator has various subsystems like Magnet Power Supply, Beam Diagnostics and Vacuum etc. which are required to work in a stable manner to ensure required machine performance. Logging of system parameters at a faster rate plays a crucial role in analysing and understanding machine behaviour. Logging all the machine parameters consistently at the rate of typically more than 1 Hz has been the aim of a recent data logging system upgrade. Nearly ten thousand parameters are being logged at varying intervals of one second to one minute in Indus accelerator complex. The present logging scheme is augmented to log all these parameters at a rate equal to or more than 1 Hz. The database schema is designed according to the data type of the parameter. The data is distributed into historical table and intermediate table which comprises of recent data. Machine control applications read the parameter values from the control system and store them into the text files of finite time duration for each sub-system. The logging application of each sub-system passes these text files to database for bulk insertion. The detail design of database, logging scheme and its architecture is presented in the paper. (author)

Rill erosion in burned and salvage logged western montane forests: Effects of logging equipment type, traffic level, and slash treatment

Science.gov (United States)

Wagenbrenner, J. W.; Robichaud, P. R.; Brown, R. E.

2016-10-01

Following wildfires, forest managers often consider salvage logging burned trees to recover monetary value of timber, reduce fuel loads, or to meet other objectives. Relatively little is known about the cumulative hydrologic effects of wildfire and subsequent timber harvest using logging equipment. We used controlled rill experiments in logged and unlogged (control) forests burned at high severity in northern Montana, eastern Washington, and southern British Columbia to quantify rill overland flow and sediment production rates (fluxes) after ground-based salvage logging. We tested different types of logging equipment-feller-bunchers, tracked and wheeled skidders, and wheeled forwarders-as well as traffic levels and the addition of slash to skid trails as a best management practice. Rill experiments were done at each location in the first year after the fire and repeated in subsequent years. Logging was completed in the first or second post-fire year. We found that ground-based logging using heavy equipment compacted soil, reduced soil water repellency, and reduced vegetation cover. Vegetation recovery rates were slower in most logged areas than the controls. Runoff rates were higher in the skidder and forwarder plots than their respective controls in the Montana and Washington sites in the year that logging occurred, and the difference in runoff between the skidder and control plots at the British Columbia site was nearly significant (p = 0.089). Most of the significant increases in runoff in the logged plots persisted for subsequent years. The type of skidder, the addition of slash, and the amount of forwarder traffic did not significantly affect the runoff rates. Across the three sites, rill sediment fluxes were 5-1900% greater in logged plots than the controls in the year of logging, and the increases were significant for all logging treatments except the low use forwarder trails. There was no difference in the first-year sediment fluxes between the feller

Acoustic Log Prediction on the Basis of Kernel Extreme Learning Machine for Wells in GJH Survey, Erdos Basin

Directory of Open Access Journals (Sweden)

Jianhua Cao

2017-01-01

Full Text Available In petroleum exploration, the acoustic log (DT is popularly used as an estimator to calculate formation porosity, to carry out petrophysical studies, or to participate in geological analysis and research (e.g., to map abnormal pore-fluid pressure. But sometime it does not exist in those old wells drilled 20 years ago, either because of data loss or because of just being not recorded at that time. Thus synthesizing the DT log becomes the necessary task for the researchers. In this paper we propose using kernel extreme learning machine (KELM to predict missing sonic (DT logs when only common logs (e.g., natural gamma ray: GR, deep resistivity: REID, and bulk density: DEN are available. The common logs are set as predictors and the DT log is the target. By using KELM, a prediction model is firstly created based on the experimental data and then confirmed and validated by blind-testing the results in wells containing both the predictors and the target (DT values used in the supervised training. Finally the optimal model is set up as a predictor. A case study for wells in GJH survey from the Erdos Basin, about velocity inversion using the KELM-estimated DT values, is presented. The results are promising and encouraging.

Nonparametric Collective Spectral Density Estimation and Clustering

KAUST Repository

Maadooliat, Mehdi; Sun, Ying; Chen, Tianbo

2017-01-01

In this paper, we develop a method for the simultaneous estimation of spectral density functions (SDFs) for a collection of stationary time series that share some common features. Due to the similarities among the SDFs, the log-SDF can be represented using a common set of basis functions. The basis shared by the collection of the log-SDFs is estimated as a low-dimensional manifold of a large space spanned by a pre-specified rich basis. A collective estimation approach pools information and borrows strength across the SDFs to achieve better estimation efficiency. Also, each estimated spectral density has a concise representation using the coefficients of the basis expansion, and these coefficients can be used for visualization, clustering, and classification purposes. The Whittle pseudo-maximum likelihood approach is used to fit the model and an alternating blockwise Newton-type algorithm is developed for the computation. A web-based shiny App found at

Nonparametric Collective Spectral Density Estimation and Clustering

KAUST Repository

Maadooliat, Mehdi

2017-04-12

In this paper, we develop a method for the simultaneous estimation of spectral density functions (SDFs) for a collection of stationary time series that share some common features. Due to the similarities among the SDFs, the log-SDF can be represented using a common set of basis functions. The basis shared by the collection of the log-SDFs is estimated as a low-dimensional manifold of a large space spanned by a pre-specified rich basis. A collective estimation approach pools information and borrows strength across the SDFs to achieve better estimation efficiency. Also, each estimated spectral density has a concise representation using the coefficients of the basis expansion, and these coefficients can be used for visualization, clustering, and classification purposes. The Whittle pseudo-maximum likelihood approach is used to fit the model and an alternating blockwise Newton-type algorithm is developed for the computation. A web-based shiny App found at

A Generally Applicable Computer Algorithm Based on the Group Additivity Method for the Calculation of Seven Molecular Descriptors: Heat of Combustion, LogPO/W, LogS, Refractivity, Polarizability, Toxicity and LogBB of Organic Compounds; Scope and Limits of Applicability

Directory of Open Access Journals (Sweden)

Rudolf Naef

2015-10-01

Full Text Available A generally applicable computer algorithm for the calculation of the seven molecular descriptors heat of combustion, logPoctanol/water, logS (water solubility, molar refractivity, molecular polarizability, aqueous toxicity (protozoan growth inhibition and logBB (log (cblood/cbrain is presented. The method, an extendable form of the group-additivity method, is based on the complete break-down of the molecules into their constituting atoms and their immediate neighbourhood. The contribution of the resulting atom groups to the descriptor values is calculated using the Gauss-Seidel fitting method, based on experimental data gathered from literature. The plausibility of the method was tested for each descriptor by means of a k-fold cross-validation procedure demonstrating good to excellent predictive power for the former six descriptors and low reliability of logBB predictions. The goodness of fit (Q2 and the standard deviation of the 10-fold cross-validation calculation was >0.9999 and 25.2 kJ/mol, respectively, (based on N = 1965 test compounds for the heat of combustion, 0.9451 and 0.51 (N = 2640 for logP, 0.8838 and 0.74 (N = 1419 for logS, 0.9987 and 0.74 (N = 4045 for the molar refractivity, 0.9897 and 0.77 (N = 308 for the molecular polarizability, 0.8404 and 0.42 (N = 810 for the toxicity and 0.4709 and 0.53 (N = 383 for logBB. The latter descriptor revealing a very low Q2 for the test molecules (R2 was 0.7068 and standard deviation 0.38 for N = 413 training molecules is included as an example to show the limits of the group-additivity method. An eighth molecular descriptor, the heat of formation, was indirectly calculated from the heat of combustion data and correlated with published experimental heat of formation data with a correlation coefficient R2 of 0.9974 (N = 2031.

Log canonical thresholds of smooth Fano threefolds

International Nuclear Information System (INIS)

Cheltsov, Ivan A; Shramov, Konstantin A

2008-01-01

The complex singularity exponent is a local invariant of a holomorphic function determined by the integrability of fractional powers of the function. The log canonical thresholds of effective Q-divisors on normal algebraic varieties are algebraic counterparts of complex singularity exponents. For a Fano variety, these invariants have global analogues. In the former case, it is the so-called α-invariant of Tian; in the latter case, it is the global log canonical threshold of the Fano variety, which is the infimum of log canonical thresholds of all effective Q-divisors numerically equivalent to the anticanonical divisor. An appendix to this paper contains a proof that the global log canonical threshold of a smooth Fano variety coincides with its α-invariant of Tian. The purpose of the paper is to compute the global log canonical thresholds of smooth Fano threefolds (altogether, there are 105 deformation families of such threefolds). The global log canonical thresholds are computed for every smooth threefold in 64 deformation families, and the global log canonical thresholds are computed for a general threefold in 20 deformation families. Some bounds for the global log canonical thresholds are computed for 14 deformation families. Appendix A is due to J.-P. Demailly.

Limitations and developing directions of pulsed neutron logging

International Nuclear Information System (INIS)

Wu Wensheng; Xiao Lizhi

2007-01-01

The paper explains briefly the principle of pulsed neutron logging method, summarizes the system and uses of the method in petroleum logging. The paper points out the limitations of pulsed neutron logging such as low precise measurements, low logging speed, plenty of influence factors, low vertical resolution, bad adaptability, difficult logging interpretation and so on, and expounds its developing directions in hardware, software, method and principle. (authors)

Low-activity spectrometric gamma-ray logging technique for delineation of coal/rock interfaces in dry blast holes

International Nuclear Information System (INIS)

Asfahani, J.; Borsaru, M.

2007-01-01

A low-activity spectrometric gamma-ray logging technique is proposed in this paper as a sensitive tool for the delineation of coal/rock interfaces in dry blast holes. The advantages and superiority of this technique over traditional micro-density non-spectrometric gamma-ray tools are demonstrated

Elephant logging and environment

International Nuclear Information System (INIS)

Tin-Aung-Hla

1995-01-01

The natural environment comprises non-biological elements such as air, water, light, heat and biological elements of animal and plant life; all interact with each other to create an ecosystem. Human activities like over-exploitation of forest results in deforestation and desertification. This consequently changes ecological balance. Topics on: (1) history of elephants utilization; (2) elephant logging; (3) classification of elephants; (4) dragging gear; (5) elephant power; (6) elephant logging and environment, are discussed

Well logging with natural gamma radiation

International Nuclear Information System (INIS)

Ellis, D.V.

1983-01-01

An invention is described for use in natural gamma radiation well logging in which measurements taken in a borehole are used in the search for valuable underground resources such as oil or gas. The invention comprises deriving a log of natural gamma radiation detected in selected energy windows for a selected borehole depth interval and converting it into a log of the selected subsurface materials, e.g. Th, U, K. This log is corrected for the effects of 1) either a gamma ray emitter in the borehole fluid, e.g. potassium salts and/or 2) a gamma ray attenuator in the borehole fluid, e.g. a strong attenuator such as barite and/or hematite. The Th, U, K log is particularly useful in the exploration of oil and gas resources since the Th, U, K concentrations are a good indication as to the presence, type and volume of shale and clay in the formations surrounding the borehole. (U.K.)

Financial feasibility of a log sort yard handling small-diameter logs: A preliminary study

Science.gov (United States)

Han-Sup Han; E. M. (Ted) Bilek; John (Rusty) Dramm; Dan Loeffler; Dave Calkin

2011-01-01

The value and use of the trees removed in fuel reduction thinning and restoration treatments could be enhanced if the wood were effectively evaluated and sorted for quality and highest value before delivery to the next manufacturing destination. This article summarizes a preliminary financial feasibility analysis of a log sort yard that would serve as a log market to...

Pembangkitan Data dari Distribusi Log-logistik

Directory of Open Access Journals (Sweden)

Aceng Komarudin Mutaqin

2014-11-01

Full Text Available Distribusi log-logistik merupakan salah satu distribusi yang dapat diaplikasikan untuk data mutu lingkungan. Makalah ini membahas pembangkitan data dari distribusi log-logistik mulai dari pembangunan algoritme sampai pembuatan program komputer pada perangkat lunak MATLAB. Metode pembangkitan datanya menggunakan metode inverse transform. Ada dua jenis data yang dibangkitkan, yaitu data lengkap dan data tersensor kiri. Dalam makalah ini diberikan contoh data yang dibangkitkan dari distribusi log-logistik.

Pulsed neutron logging - a modern approach to petroleum exploration

International Nuclear Information System (INIS)

Navalkar, M.P.

1978-01-01

As hydrocarbons have strikingly different properties for neutrons as compared with rocks, neutronic methods are useful to prepare logs of bore holes drilled for petroleum exploration. The earlier neutron logs were based on steady neutron sources, but the superior logs, namely, neutron life time log and neutron induced spectral log are based on pulsed neutron sources. The methods of obtaining these logs, their limitations and the field equipment required are described briefly. As the two logs are complementary, a plea has been made to develop field equipment which can obtain two logs in a single run. (M.G.B.)

Effects of selective logging on large mammal populations in a remote indigenous territory in the northern Peruvian Amazon

Directory of Open Access Journals (Sweden)

Pedro Mayor

2015-12-01

Full Text Available We examined the effects of selective timber logging carried out by local indigenous people in remote areas within indigenous territories on the mammal populations of the Yavari-Mirin River basin on the Peru-Brazil border. Recent findings show that habitat change in the study area is minimal, and any effect of logging activities on large mammal populations is highly likely to be the result of hunting associated with logging operations. We used hunting registers to estimate the monthly and yearly biomass extracted during timber operations and to calculate the catch per unit effort (CPUE in subsistence hunting in the community of Esperanza 2 to 5 years before logging activities started and 4 to 7 years after logging began. We also used line transects and the distance method to estimate animal densities before and after logging. We found that 1389 hunted animals and 27,459 kg of mammal biomass were extracted per year from logging concessions. CPUE for ungulates declined; however, it increased for other mammal orders, such as rodents and primates, indicating a shift to alternative prey items. Although collared peccaries (Pecari tajacu and tapirs (Tapirus terrestris may also have declined in numbers, this shift may have been caused by a possibly natural population crash in white-lipped peccaries (Tayassu pecari that coincided with the logging periods. We found no evidence that populations of primates were reduced by the logging activities. Because primates are sensitive to hunting, and their populations were of principal concern as logging commenced, this indicates that these forests remain of high conservation value. The unusual socioeconomic situation of these remote territories may mean that they are compatible with wildlife conservation in the Yavari-Mirin basin.

Aggregation of log-linear risks

DEFF Research Database (Denmark)

Embrechts, Paul; Hashorva, Enkeleijd; Mikosch, Thomas Valentin

2014-01-01

In this paper we work in the framework of a k-dimensional vector of log-linear risks. Under weak conditions on the marginal tails and the dependence structure of a vector of positive risks, we derive the asymptotic tail behaviour of the aggregated risk {and present} an application concerning log...

Log-inject-log in sand consolidation

International Nuclear Information System (INIS)

Murphy, R.P.; Spurlock, J.W.

1977-01-01

A method is described for gathering information for the determination of the adequacy of placement of sand consolidating plastic for sand control in oil and gas wells. The method uses a high neutron cross-section tracer which becomes part of the plastic and uses pulsed neutron logging before and after injection of the plastic. Preferably, the method uses lithium, boron, indium, and/or cadmium tracers. Boron oxide is especially useful and can be dissolved in alcohol and mixed with the plastic ingredients

Effects of host plant and larval density on intraspecific competition in larvae of the emerald ash borer (Coleoptera: Buprestidae).

Science.gov (United States)

Duan, Jian J; Larson, Kristi; Watt, Tim; Gould, Juli; Lelito, Jonathan P

2013-12-01

Competition for food, mates, and space among different individuals of the same insect species can affect density-dependent regulation of insect abundance or population dynamics. The emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), is a serious invasive pest of North American ash (Fraxinus spp.) trees, with its larvae feeding in serpentine galleries between the interface of sapwood and phloem tissues of ash trees. Using artificial infestation of freshly cut logs of green ash (Fraxinus pennsylvanica Marshall) and tropical ash (Fraxinus uhdei [Wenzig] Lingelsh) with a series of egg densities, we evaluated the mechanism and outcome of intraspecific competition in larvae of A. planipennis in relation to larval density and host plant species. Results from our study showed that as the egg densities on each log (1.5-6.5 cm in diameter and 22-25 cm in length) increased from 200 to 1,600 eggs per square meter of surface area, larval survivorship declined from ≍68 to 10% for the green ash logs, and 86 to 55% for tropical ash logs. Accordingly, larval mortality resulting from cannibalism, starvation, or both, significantly increased as egg density increased, and the biomass of surviving larvae significantly decreased on both ash species. When larval density was adjusted to the same level, however, larval mortality from intraspecific competition was significantly higher and mean biomasses of surviving larvae was significantly lower in green ash than in tropical ash. The role of intraspecific competition of A. planipennis larvae in density-dependent regulation of its natural population dynamics is discussed.

Trade-offs between carbon stocks and timber recovery in tropical forests are mediated by logging intensity.

Science.gov (United States)

Roopsind, Anand; Caughlin, T Trevor; van der Hout, Peter; Arets, Eric; Putz, Francis E

2018-03-30

Forest degradation accounts for ~ 70% of total carbon losses from tropical forests. Substantial emissions are from selective logging, a land-use activity that decreases forest carbon density. To maintain carbon values in selectively logged forests, climate change mitigation policies and government agencies promote the adoption of reduced-impact logging (RIL) practices. However, whether RIL will maintain both carbon and timber values in managed tropical forests over time remains uncertain. In this study, we quantify the recovery of timber stocks and aboveground carbon at an experimental site where forests were subjected to different intensities of RIL (4 trees ha -1 , 8 trees ha -1 , and 16 trees ha -1 ). Our census data spans 20 years post-logging and 17 years after the liberation of future crop trees from competition in a tropical forest on the Guiana Shield, a globally important forest carbon reservoir. We model recovery of timber and carbon with a breakpoint regression that allowed us to capture elevated tree mortality immediately after logging. Recovery rates of timber and carbon were governed by the presence of residual trees (i.e., trees that persisted through the first harvest). The liberation treatment stimulated faster recovery of timber albeit at a carbon cost. Model results suggest a threshold logging intensity beyond which forests managed for timber and carbon derive few benefits from RIL, with recruitment and residual growth not sufficient to offset losses. Inclusion of the breakpoint at which carbon and timber gains outpaced post-logging mortality led to high predictive accuracy, including out-of-sample R 2 values >90%, and enabled inference on demographic changes post-logging. Our modeling framework is broadly applicable to studies that aim to quantify impacts of logging on forest recovery. Overall, we demonstrate that initial mortality drives variation in recovery rates, that the second harvest depends on old growth wood, and that timber

29 CFR 1918.88 - Log operations.

Science.gov (United States)

2010-07-01

...) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Handling Cargo § 1918.88 Log operations. (a) Working in..., the employer shall ensure that employees remain clear of areas where logs being dumped could strike...

Application of an efficient materials perturbation technique to Monte Carlo photon transport calculations in borehole logging

International Nuclear Information System (INIS)

Picton, D.J.; Harris, R.G.; Randle, K.; Weaver, D.R.

1995-01-01

This paper describes a simple, accurate and efficient technique for the calculation of materials perturbation effects in Monte Carlo photon transport calculations. It is particularly suited to the application for which it was developed, namely the modelling of a dual detector density tool as used in borehole logging. However, the method would be appropriate to any photon transport calculation in the energy range 0.1 to 2 MeV, in which the predominant processes are Compton scattering and photoelectric absorption. The method enables a single set of particle histories to provide results for an array of configurations in which material densities or compositions vary. It can calculate the effects of small perturbations very accurately, but is by no means restricted to such cases. For the borehole logging application described here the method has been found to be efficient for a moderate range of variation in the bulk density (of the order of ±30% from a reference value) or even larger changes to a limited portion of the system (e.g. a low density mudcake of the order of a few tens of mm in thickness). The effective speed enhancement over an equivalent set of individual calculations is in the region of an order of magnitude or more. Examples of calculations on a dual detector density tool are given. It is demonstrated that the method predicts, to a high degree of accuracy, the variation of detector count rates with formation density, and that good results are also obtained for the effects of mudcake layers. An interesting feature of the results is that relative count rates (the ratios of count rates obtained with different configurations) can usually be determined more accurately than the absolute values of the count rates. (orig.)

Logging utilization in Idaho: Current and past trends

Science.gov (United States)

Eric A. Simmons; Todd A. Morgan; Erik C. Berg; Stanley J. Zarnoch; Steven W. Hayes; Mike T. Thompson

2014-01-01

A study of commercial timber-harvesting activities in Idaho was conducted during 2008 and 2011 to characterize current tree utilization, logging operations, and changes from previous Idaho logging utilization studies. A two-stage simple random sampling design was used to select sites and felled trees for measurement within active logging sites. Thirty-three logging...

Optimum parameters in a model for tumour control probability, including interpatient heterogeneity: evaluation of the log-normal distribution

International Nuclear Information System (INIS)

Keall, P J; Webb, S

2007-01-01

The heterogeneity of human tumour radiation response is well known. Researchers have used the normal distribution to describe interpatient tumour radiosensitivity. However, many natural phenomena show a log-normal distribution. Log-normal distributions are common when mean values are low, variances are large and values cannot be negative. These conditions apply to radiosensitivity. The aim of this work was to evaluate the log-normal distribution to predict clinical tumour control probability (TCP) data and to compare the results with the homogeneous (δ-function with single α-value) and normal distributions. The clinically derived TCP data for four tumour types-melanoma, breast, squamous cell carcinoma and nodes-were used to fit the TCP models. Three forms of interpatient tumour radiosensitivity were considered: the log-normal, normal and δ-function. The free parameters in the models were the radiosensitivity mean, standard deviation and clonogenic cell density. The evaluation metric was the deviance of the maximum likelihood estimation of the fit of the TCP calculated using the predicted parameters to the clinical data. We conclude that (1) the log-normal and normal distributions of interpatient tumour radiosensitivity heterogeneity more closely describe clinical TCP data than a single radiosensitivity value and (2) the log-normal distribution has some theoretical and practical advantages over the normal distribution. Further work is needed to test these models on higher quality clinical outcome datasets

Basalt characterization by means of nuclear and electrical well logging techniques. Case study from Southern Syria

International Nuclear Information System (INIS)

Asfahani, Jamal

2011-01-01

Nuclear well logging, including natural gamma ray, density, and neutron-porosity techniques are used with electrical well logging of long and short normal techniques to characterize the basaltic areas largely extended in Southern Syria. Statistical analysis approach with the threshold concept has been adapted for such characterization, where four kinds of basalt have been identified: very hard basalt, hard basalt, fractured basalt, and basalt alteration products. The spectrometric gamma technique has also been applied on the retrieved rock samples in order to determine the radioactive content (eU, eTh, and K%) of the basaltic section in the study area. No radioactive anomalies have been detected, the radioactive values are normal and in the expected range.

Method and apparatus for logging inclined earth boreholes

International Nuclear Information System (INIS)

Youmans, A.H.

1981-01-01

An improved technique is provided for comparing the velocity of an elongated well logging instrument traversing an inclined earth borehole with the playout velocity of the well logging cable at the earth's surface to control both the cable hoist drum rotation and the rate of movement of the subsurface instrument and thus insure cable playout is in equilibrium with the logging instrument movement. Method and apparatus are described for detecting any reduction in movement of the logging instrument through the borehole and for reducing the velocity of the logging cable playout in response thereto by reducing drum rotation. Further, when the velocity of cable playout slows to a preselected value, a monitoring circuit generates control signals which actuate a means of power attached to or integral with the logging instrument which, upon initiation, apply a force to move the logging instrument upward or downward within the borehole

Log-concavity property for some well-known distributions

Directory of Open Access Journals (Sweden)

G. R. Mohtashami Borzadaran

2011-12-01

Full Text Available Interesting properties and propositions, in many branches of science such as economics have been obtained according to the property of cumulative distribution function of a random variable as a concave function. Caplin and Nalebuff (1988,1989, Bagnoli and Khanna (1989 and Bagnoli and Bergstrom (1989 , 1989, 2005 have discussed the log-concavity property of probability distributions and their applications, especially in economics. Log-concavity concerns twice differentiable real-valued function g whose domain is an interval on extended real line. g as a function is said to be log-concave on the interval (a,b if the function ln(g is a concave function on (a,b. Log-concavity of g on (a,b is equivalent to g'/g being monotone decreasing on (a,b or (ln(g" 6] have obtained log-concavity for distributions such as normal, logistic, extreme-value, exponential, Laplace, Weibull, power function, uniform, gamma, beta, Pareto, log-normal, Student's t, Cauchy and F distributions. We have discussed and introduced the continuous versions of the Pearson family, also found the log-concavity for this family in general cases, and then obtained the log-concavity property for each distribution that is a member of Pearson family. For the Burr family these cases have been calculated, even for each distribution that belongs to Burr family. Also, log-concavity results for distributions such as generalized gamma distributions, Feller-Pareto distributions, generalized Inverse Gaussian distributions and generalized Log-normal distributions have been obtained.

Pulsed neutron generator for logging

International Nuclear Information System (INIS)

Thibideau, F.D.

1977-01-01

A pulsed neutron generator for uranium logging is described. This generator is one component of a prototype uranium logging probe which is being developed by SLA to detect, and assay, uranium by borehole logging. The logging method is based on the measurement of epithermal neutrons resulting from the prompt fissioning of uranium from a pulsed source of 17.6 MeV neutrons. An objective of the prototype probe was that its diameter not exceed 2.75 inches, which would allow its use in conventional rotary drill holes of 4.75-inch diameter. This restriction limited the generator to a maximum 2.375-inch diameter. The performance requirements for the neutron generator specified that it operate with a nominal output of 5 x 10 6 neutrons/pulse at up to 100 pulses/second for a one-hour period. The development of a neutron generator meeting the preliminary design goals was completed and two prototype models were delivered to SLA. These two generators have been used by SLA to log a number of boreholes in field evaluation of the probe. The results of the field evaluations have led to the recommendation of several changes to improve the probe's operation. Some of these changes will require additional development effort on the neutron generator. It is expected that this work will be performed during 1977. The design and operation of the first prototype neutron generators is described

An innovative OSCE clinical log station: a quantitative study of its influence on Log use by medical students

Directory of Open Access Journals (Sweden)

Hudson Judith N

2012-11-01

Full Text Available Abstract Background A Clinical Log was introduced as part of a medical student learning portfolio, aiming to develop a habit of critical reflection while learning was taking place, and provide feedback to students and the institution on learning progress. It was designed as a longitudinal self-directed structured record of student learning events, with reflection on these for personal and professional development, and actions planned or taken for learning. As incentive was needed to encourage student engagement, an innovative Clinical Log station was introduced in the OSCE, an assessment format with established acceptance at the School. This study questions: How does an OSCE Clinical Log station influence Log use by students? Methods The Log station was introduced into the formative, and subsequent summative, OSCEs with careful attention to student and assessor training, marking rubrics and the standard setting procedure. The scoring process sought evidence of educational use of the log, and an ability to present and reflect on key learning issues in a concise and coherent manner. Results Analysis of the first cohort’s Log use over the four-year course (quantified as number of patient visits entered by all students revealed limited initial use. Usage was stimulated after introduction of the Log station early in third year, with some improvement during the subsequent year-long integrated community-based clerkship. Student reflection, quantified by the mean number of characters in the ‘reflection’ fields per entry, peaked just prior to the final OSCE (mid-Year 4. Following this, very few students continued to enter and reflect on clinical experience using the Log. Conclusion While the current study suggested that we can’t assume students will self-reflect unless such an activity is included in an assessment, ongoing work has focused on building learner and faculty confidence in the value of self-reflection as part of being a competent

La competitividad logística en Latinoamérica: índice logístico vs. propuesta metodológica

Directory of Open Access Journals (Sweden)

Marco Alberto Valenzo Jiménez

2016-02-01

Full Text Available Este artículo muestra la situación actual de la competitividad logística en los países latinoamericanos, tomando como base el informe denominado “Connecting to Compite” (Trade Logistics in the Global Economy, 2007 del Banco Mundial. Este informe muestra el ranking de las posiciones que tienen los países latinoamericanos en materia de logística y en el cual se analizan las variables —aduanas, infraestructura, embarques internacionales, competencia logística, trazabilidad y seguimiento, costos logísticos domésticos y tiempo de entrega— que contiene la metodología utilizada por el Banco Mundial. La plataforma de estudio de este artículo parte del índice de competitividad logística, que, mediante la aplicación de la metodología “Valenzo – Martínez” permite analizar la base de datos de una manera más profunda, y da como resultado una escala de competitividad logística que nos muestra el nivel general de la competitividad logística en Latinoamérica, así como también el nivel de competitividad por variable, para, de esta manera, permitir una fácil interpretación de los resultados.

Selective logging and its relation to deforestation

Science.gov (United States)

Gregory P. Asner; Michael Keller; Marco Lentini; Frank Merry; Souza Jr. Carlos

2009-01-01

Selective logging is a major contributor to the social, economic, and ecological dynamics of Brazilian Amazonia. Logging activities have expanded from low-volume floodplain harvests in past centuries to high-volume operations today that take about 25 million m3 of wood from the forest each year. The most common high-impact conventional and often illegal logging...

Mud Logging; Control geologico en perforaciones petroliferas (Mud Logging)

Energy Technology Data Exchange (ETDEWEB)

Pumarega Lafuente, J.C.

1994-12-31

Mud Logging is an important activity in the oil field and it is a key job in drilling operations, our duties are the acquisition, collection and interpretation of the geological and engineering data at the wellsite, also inform the client immediately of any significant changes in the well. (Author)

Digital-to-analog device for continuous detection of neutron damping decrement in logging

International Nuclear Information System (INIS)

Sokolov, Yu.I.; Zinchenko, A.I.; Rudenko, Eh.L.

1976-01-01

Algorithms are analyzed for a continuous detection of the damping decrement (DD) of the thermal neutron density in time, characterizing absorptive and diffusion properties of a bed; an an automated measuring device has been developed. The design of a digital calculator involving reguired mathematical and logical operations in the DD measurement by the specified algorithms necessitated the use of a system of elements with a diode-transistor RC logic. Following laboratory tests the mock-up of the calculator was subjected to borehole tests as part of the pulsed neutron logging apparatus of the IGN-4 type. A continuous detection of the DD reciprocal with a parallel recording of the differential and integral curves of pulsed neutron-neutron logging has been performed. The borehole tests revealed the efficiency of the new device and the possibility of its use together with the apparatus of the IGN-4 type

Mariners Weather Log

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Mariners Weather Log (MWL) is a publication containing articles, news and information about marine weather events and phenomena, worldwide environmental impact...

Pacific Rim log trade: determinants and trends.

Science.gov (United States)

Donald F. Flora; Andrea L. Anderson; Wendy J. McGinnls

1991-01-01

Pacific Rim trade in softwood logs amounts to about $3 billion annually, of which the U.S. share is about $2 billion. Log exporting is a significant part of the forest economy in the Pacific Northwest. The 10 major Pacific Rim log-trading client and competitor countries differ widely in their roles in trade and in their policies affecting the industry.

Log Analysis Using Splunk Hadoop Connect

Science.gov (United States)

2017-06-01

23 A. INPUT SELECTION ...Conversion Resource Consumption .............................................. 28 Figure 8. Distribution of Events in Years...running a logging service puts a performance tax on the system and may cause the degradation of performance. More thorough 8 logging will cause a

Log and tree sawing times for hardwood mills

Science.gov (United States)

Everette D. Rast

1974-01-01

Data on 6,850 logs and 1,181 trees were analyzed to predict sawing times. For both logs and trees, regression equations were derived that express (in minutes) sawing time per log or tree and per Mbf. For trees, merchantable height is expressed in number of logs as well as in feet. One of the major uses for the tables of average sawing times is as a bench mark against...

Multiple Browsers Structure Tree Recruitment in Logged Temperate Forests.

Directory of Open Access Journals (Sweden)

Edward K Faison

Full Text Available Historical extirpations have resulted in depauperate large herbivore assemblages in many northern forests. In eastern North America, most forests are inhabited by a single wild ungulate species, white-tailed deer (Odocoileus virginianus, and relationships between deer densities and impacts on forest regeneration are correspondingly well documented. Recent recolonizations by moose (Alces americanus in northeastern regions complicate established deer density thresholds and predictions of browsing impacts on forest dynamics because size and foraging differences between the two animals suggest a lack of functional redundancy. We asked to what extent low densities of deer + moose would structure forest communities differently from that of low densities of deer in recently logged patch cuts of Massachusetts, USA. In each site, a randomized block with three treatment levels of large herbivores-no-ungulates (full exclosure, deer (partial exclosure, and deer + moose (control was established. After 6-7 years, deer + moose reduced stem densities and basal area by 2-3-fold, Prunus pensylvanica and Quercus spp. recruitment by 3-6 fold, and species richness by 1.7 species (19%. In contrast, in the partial exclosures, deer had non-significant effects on stem density, basal area, and species composition, but significantly reduced species richness by 2.5 species on average (28%. Deer browsing in the partial exclosure was more selective than deer + moose browsing together, perhaps contributing to the decline in species richness in the former treatment and the lack of additional decline in the latter. Moose used the control plots at roughly the same frequency as deer (as determined by remote camera traps, suggesting that the much larger moose was the dominant browser species in terms of animal biomass in these cuts. A lack of functional redundancy with respect to foraging behavior between sympatric large herbivores may explain combined browsing effects that were

Multiple browsers structure tree recruitment in logged temperate forests

Science.gov (United States)

Faison, Edward K.; DeStefano, Stephen; Foster, David R.; Rapp, Joshua M.; Compton, Justin A.

2016-01-01

Historical extirpations have resulted in depauperate large herbivore assemblages in many northern forests. In eastern North America, most forests are inhabited by a single wild ungulate species, white-tailed deer (Odocoileus virginianus), and relationships between deer densities and impacts on forest regeneration are correspondingly well documented. Recent recolonizations by moose (Alces americanus) in northeastern regions complicate established deer density thresholds and predictions of browsing impacts on forest dynamics because size and foraging differences between the two animals suggest a lack of functional redundancy. We asked to what extent low densities of deer + moose would structure forest communities differently from that of low densities of deer in recently logged patch cuts of Massachusetts, USA. In each site, a randomized block with three treatment levels of large herbivores–no-ungulates (full exclosure), deer (partial exclosure), and deer + moose (control) was established. After 6–7 years, deer + moose reduced stem densities and basal area by 2-3-fold, Prunus pensylvanica and Quercus spp. recruitment by 3–6 fold, and species richness by 1.7 species (19%). In contrast, in the partial exclosures, deer had non-significant effects on stem density, basal area, and species composition, but significantly reduced species richness by 2.5 species on average (28%). Deer browsing in the partial exclosure was more selective than deer + moose browsing together, perhaps contributing to the decline in species richness in the former treatment and the lack of additional decline in the latter. Moose used the control plots at roughly the same frequency as deer (as determined by remote camera traps), suggesting that the much larger moose was the dominant browser species in terms of animal biomass in these cuts. A lack of functional redundancy with respect to foraging behavior between sympatric large herbivores may explain combined browsing effects that were

Pulsed radiation decay logging

International Nuclear Information System (INIS)

Mills, W.R. Jr.

1983-01-01

There are provided new and improved well logging processes and systems wherein the detection of secondary radiation is accomplished during a plurality of time windows in a manner to accurately characterize the decay rate of the secondary radiation. The system comprises a well logging tool having a primary pulsed radiation source which emits repetitive time-spaced bursts of primary radiation and detector means for detecting secondary radiation resulting from the primary radiation and producing output signals in response to the detected radiation. A plurality of measuring channels are provided, each of which produces a count rate function representative of signals received from the detector means during successive time windows occurring between the primary radiation bursts. The logging system further comprises means responsive to the measuring channels for producing a plurality of functions representative of the ratios of the radiation count rates measured during adjacent pairs of the time windows. Comparator means function to compare the ratio functions and select at least one of the ratio functions to generate a signal representative of the decay rate of the secondary radiation

Environmental variables and tree population structures in deciduous forests of central Brazil with different levels of logging

Directory of Open Access Journals (Sweden)

Daniel Luis Mascia Vieira

2008-04-01

Full Text Available Population structures of six tree species in three fragments of intact seasonal deciduous forest and three fragments disturbed by logging were studied in the northeastern Goiás. Forty random 400 m² plots were allocated in each fragment to survey plant population structures, number of stumps, cattle feces, burnt logs, and canopy openness. Soil cover by life forms was estimated in 1m² sub-plots. Lianas were abundant in intermediately logged fragments and invasive herbs in the most disturbed fragment. Cattle avoided dense herbaceous strata, such as liana tangles. Cavanillesia arborea, Eugenia dysenterica and Swartzia multijuga trees occurred at very low densities in all the fragments and their seedlings were practically absent, which might endanger their future populations in these fragments. Myracrodruon urundeuva, Tabebuia impetiginosa and Astronium fraxinifolium, the most logged species, had high density of seedlings in all the fragments. However, the highest density of saplings and juvenile individuals occurred in the most disturbed fragment.As estruturas populacionais de seis espécies de árvores foram estudadas em três fragmentos de floresta estacional decidual intactos e três fragmentos impactados pela exploração seletiva de madeira no nordeste goiano. Quarenta parcelas de 400m² foram estabelecidas em cada fragmento para a amostragem de populações, número de tocos, fezes de gado, troncos queimados e abertura de dossel. A cobertura do solo por formas de vida foi estimada em sub-parcelas de 1m². Lianas foram mais abundantes em fragmentos com perturbação intermediária, enquanto herbáceas invasoras no fragmento mais perturbado. Cavanillesia arborea, Eugenia dysenterica e Swartzia multijuga ocorreram em densidades muito baixas em todos os fragmentos e plântulas foram praticamente ausentes, o que pode ameaçar o futuro de suas populações. Myracrodruon urundeuva, Tabebuia impetiginosa e Astronium fraxinifolium, as espécies mais

Review of the Czubek--Jonas gamma-log program

International Nuclear Information System (INIS)

Matthews, M.

1978-11-01

Several gamma-ray logs were computer processed using the Czubek--Jones and DOE's MDDAT gamma-log programs. Both of these programs convert counts per second from the gamma-ray logs to percent eU 3 O 8 . The results of these programs were compared to each other and to the core analysis (percent U 3 O 8 ) of the logged boreholes. The two gamma-log programs produced similar results. The core analysis did not compare favorably with the results of either gamma-log program. This unfavorable comparison is probably due to an incorrect assumption of secular equilibrium for the ore surrounding the boreholes. The Czubek--Jonas program requires a knowledge of the linear attenuation coefficient of the rocks surrounding a borehole. This limits the usefulness of the program because this coefficient is generally not known and varies for different gamma-ray energies. It is recommended that the MDDAT program continue to be used for estimating the grade (percent eU 3 O 8 ) from gamma-log data and not be replaced by the Czubek--Jonas program

CMLOG: A common message logging system

International Nuclear Information System (INIS)

Chen, J.; Akers, W.; Bickley, M.; Wu, D.; Watson, W. III

1997-01-01

The Common Message Logging (CMLOG) system is an object-oriented and distributed system that not only allows applications and systems to log data (messages) of any type into a centralized database but also lets applications view incoming messages in real-time or retrieve stored data from the database according to selection rules. It consists of a concurrent Unix server that handles incoming logging or searching messages, a Motif browser that can view incoming messages in real-time or display stored data in the database, a client daemon that buffers and sends logging messages to the server, and libraries that can be used by applications to send data to or retrieve data from the database via the server. This paper presents the design and implementation of the CMLOG system meanwhile it will also address the issue of integration of CMLOG into existing control systems. CMLOG into existing control systems

Well log characterization of natural gas-hydrates

Science.gov (United States)

Collett, Timothy S.; Lee, Myung W.

2012-01-01

In the last 25 years there have been significant advancements in the use of well-logging tools to acquire detailed information on the occurrence of gas hydrates in nature: whereas wireline electrical resistivity and acoustic logs were formerly used to identify gas-hydrate occurrences in wells drilled in Arctic permafrost environments, more advanced wireline and logging-while-drilling (LWD) tools are now routinely used to examine the petrophysical nature of gas-hydrate reservoirs and the distribution and concentration of gas hydrates within various complex reservoir systems. Resistivity- and acoustic-logging tools are the most widely used for estimating the gas-hydrate content (i.e., reservoir saturations) in various sediment types and geologic settings. Recent integrated sediment coring and well-log studies have confirmed that electrical-resistivity and acoustic-velocity data can yield accurate gas-hydrate saturations in sediment grain-supported (isotropic) systems such as sand reservoirs, but more advanced log-analysis models are required to characterize gas hydrate in fractured (anisotropic) reservoir systems. New well-logging tools designed to make directionally oriented acoustic and propagation-resistivity log measurements provide the data needed to analyze the acoustic and electrical anisotropic properties of both highly interbedded and fracture-dominated gas-hydrate reservoirs. Advancements in nuclear magnetic resonance (NMR) logging and wireline formation testing (WFT) also allow for the characterization of gas hydrate at the pore scale. Integrated NMR and formation testing studies from northern Canada and Alaska have yielded valuable insight into how gas hydrates are physically distributed in sediments and the occurrence and nature of pore fluids(i.e., free water along with clay- and capillary-bound water) in gas-hydrate-bearing reservoirs. Information on the distribution of gas hydrate at the pore scale has provided invaluable insight on the mechanisms

Distinguishing oil and water layers in a cracked porous medium using pulsed neutron logging data based on Hudson's crack theory

Science.gov (United States)

Zhang, Xueang; Yang, Zhichao; Tang, Bin; Wang, Renbo; Wei, Xiong

2018-05-01

During geophysical surveys, water layers may interfere with the detection of oil layers. In order to distinguish between oil and water layers in porous cracked media, research on the properties of the cracks, the oil and water layers, and their relation to pulsed neutron logging characteristics is essential. Using Hudson's crack theory, we simulated oil and water layers in a cracked porous medium with different crack parameters corresponding to the well log responses. We found that, in a cracked medium with medium-angle (40°-50°) cracks, the thermal neutron count peak value is higher and more sensitive than those in low-angle and high-angle crack environments; in addition, the thermal neutron density distribution shows more minimum values than in other cases. Further, the thermal neutron count and the rate of change for the oil layer are greater than those of the water layer, and the time spectrum count peak value for the water layer in middle-high-angle (40°-70°) cracked environments is higher than that of the oil layer. The thermal neutron density distribution sensitivity is higher in the water layer with a range of small crack angles (0°-30°) than in the oil layer with the same range of angles. In comparing the thermal neutron density distribution, thermal neutron count peak, thermal neutron density distribution sensitivity, and time spectrum maximum in the oil and water layers, we find that neutrons in medium-angle (40°-50°) cracked reservoirs are more sensitive to deceleration and absorption than those in water layers; neutrons in approximately horizontal (0°-30°) cracked water layers are more sensitive to deceleration than those in reservoirs. These results can guide future work in the cracked media neutron logging field.

Advanced of X-ray fluorescence logging technique in China

International Nuclear Information System (INIS)

Zhou Sichun; Ge Liangquan; Lai Wanchang; Yang Qiang

2010-01-01

The paper discuses principle of X-ray fluorescence logging, and introduces advanced of X-ray fluorescence logging technique in China. By 2009, third generation XRF logging instrument has been developed in China, and good logging result has been obtained in Lala copper mine. (authors)

Extraction of market expectations from risk-neutral density

Directory of Open Access Journals (Sweden)

Josip Arnerić

2015-12-01

Full Text Available The purpose of this paper is to investigate which of the proposed parametric models for extracting risk-neutral density; among Black-Scholes Merton, mixture of two log-normals and generalized beta; give the best fit. The model that fits sample data better is used to describe different characteristics (moments of the ex ante probability distribution. The empirical findings indicate that no matter which parametric model is used, the best fit is always obtained for short maturity horizon, but when comparing models in short-run, the mixture of two log-normals gives statistically significant smaller MSE. According to the pair-wise comparison results, the basic conclusion is that the mixture of two log-normals is superior to the other parametric models and has proven to be very flexible in capturing commonly observed characteristics of the underlying financial assets, such as asymmetries and “fat-tails” in implied probability distribution.

Estimated method of permeability in the granitic rocks by geophysical loggings; Butsuri kenso shuho ni yoru kakoganchu no tosuisei ni kansuru ichikosatsu

Energy Technology Data Exchange (ETDEWEB)

Matsuoka, K; Hashimoto, N. [Geophysical Surveying and Consulting Co. Ltd., Tokyo (Japan)]Ogata, N. [Power Reactor and Nuclear Fuel Development Corp., Tokyo (Japan)

1997-10-22

Water permeability in granite is estimated by performing geophysical investigation using a 500m-deep test hole drilled in granitic rocks in the vicinity of a Tono mine. The investigation consists of flowmeter logging and geophysical logging. In flowmeter logging, a probe is moved up and down in the hole at a constant speed by use of a cable, and the cable speed and impeller revolution are used to workout the relative speed of the fluid in the hole. In the geophysical logging, a probe attached to the leading end of a logging cable is replaced with other probes so as to acquire different geophysical data. In a hole drilled in a crack-abundant rockbed such as a granitic rockbed, the inflow and outflow of ground water is governed mainly by water-permeable crack zones, and the result of the flowmeter logging show that this hole has three highly water-permeable zones. Using the results of the loggings, a correlative equation is worked out between changes in flow speed and changes in permeability index obtained by hydraulics tests. Among the various results achieved by the geophysical logging, a fine correlationship is found between an equation relative to permeability obtained using electricity and density and water-permeability indexes obtained by hydraulic tests conducted in situ. 4 refs., 8 figs., 1 tab.

One less trip : logging with less tripping, more protection

Energy Technology Data Exchange (ETDEWEB)

Byfield, M.

2005-12-15

New logging technology by Datalog Technology Inc. was described. Logging-while-tripping (LWT) technology uses a slim petrophysical sensor package that is moved to the targeted geological formation through a drill pipe, which reduces the exposure to vibration and shock involved in logging-while-drilling (LWD). The equipment features standard components in a patented configuration and comes in 2 segments: the receiver sub and the sensor package electronics. A receiver sub is inserted into the bottomhole assembly at the end of the drill string. Drilling progresses with the LWT sub in the bottomhole assembly until the borehole approaches the logging depth. The sensor package and electronics are then lowered into the drill string. If the well is horizontal, rig pumps push the package into the drill string until it lands in the LWT sub. Drill pipes are moved across the zone of interest and logs are recorded on downhole memory contained within the LWT package. As the logging operation progresses, a depth recorder at the surface records depth information along with the downhole recorders. When logging is completed, downhole tools are retrieved, and data downloaded from the LWT onboard memory is merged with the surface depth information to generate well logs. Retrieval via the drill string greatly reduces the risk of losing the logging gear, which contains radioactive material. Federal officials now routinely insist on extensive fishing operations to retrieve lost tools. If a well gets a gas kick while logging is in progress, the operator can still pump down mud or close the blowout preventer rams if necessary, and save time in determining where to perforate shallow gas wells. Compensated neutron logs, gamma rays, spectrum gamma rays, and induction have been tested with the LWT system. It was concluded that Petro-Canada has deployed the logs recently and has achieved results that compared satisfactorily with conventional logs. 2 figs.

Rill erosion in burned and salvage logged western montane forests: Effects of logging equipment type, traffic level, and slash treatment

Science.gov (United States)

J. W. Wagenbrenner; P. R. Robichaud; R. E. Brown

2016-01-01

Following wildfires, forest managers often consider salvage logging burned trees to recover monetary value of timber, reduce fuel loads, or to meet other objectives. Relatively little is known about the cumulative hydrologic effects of wildfire and subsequent timber harvest using logging equipment. We used controlled rill experiments in logged and unlogged (control)...

Applicability estimation of flowmeter logging for detecting hydraulic pass

International Nuclear Information System (INIS)

Miyakawa, Kimio; Tanaka, Yasuji; Tanaka, Kazuhiro

1997-01-01

Estimation of the hydraulic pass governing hydrogeological structure contributes significantly to the siting HLW repository. Flowmeter logging can detect hydraulic passes by measuring vertical flow velocity of groundwater in the borehole. We reviewed application of this logging in situ. The hydraulic pass was detected with combination of ambient flow logging, with pumping and/or injecting induced flow logging. This application showed that the flowmeter logging detected hydraulic passes conveniently and accurately compared with other hydraulic tests. Hydraulic conductivity by using flowmeter logging was assessed above 10 -6 m/sec and within one order from comparison with injection packer tests. We suggest that appropriate application of the flowmeter logging for the siting is conducted before hydraulic tests because test sections and monitoring sections are decided rationally for procurement of quantitative hydraulic data. (author)

Linking Hunter Knowledge with Forest Change to Understand Changing Deer Harvest Opportunities in Intensively Logged Landscapes

Directory of Open Access Journals (Sweden)

Todd J. Brinkman

2009-06-01

Full Text Available The effects of landscape changes caused by intensive logging on the availability of wild game are important when the harvest of wild game is a critical cultural practice, food source, and recreational activity. We assessed the influence of extensive industrial logging on the availability of wild game by drawing on local knowledge and ecological science to evaluate the relationship between forest change and opportunities to harvest Sitka black-tailed deer (Odocoileus hemionus sitkensis on Prince of Wales Island, Alaska. We used data collected through interviews with local deer hunters and GIS analysis of land cover to determine relationships among landscape change, hunter access, and habitat for deer hunting over the last 50 yr. We then used these relationships to predict how harvest opportunities may change in the future. Intensive logging from 1950 into the 1990s provided better access to deer and habitat that facilitated deer hunting. However, successional changes in intensively logged forests in combination with a decline in current logging activity have reduced access to deer and increased undesirable habitat for deer hunting. In this new landscape, harvest opportunities in previously logged landscapes have declined, and hunters identify second-growth forest as one of the least popular habitats for hunting. Given the current state of the logging industry in Alaska, it is unlikely that the logging of the remaining old-growth forests or intensive management of second-growth forests will cause hunter opportunities to rebound to historic levels. Instead, hunter opportunities may continue to decline for at least another human generation, even if the long-term impacts of logging activity and deer harvest on deer numbers are minimal. Adapting hunting strategies to focus on naturally open habitats such as alpine and muskeg that are less influenced by external market forces may require considerably more hunting effort but provide the best option for

A fast simulation method for the Log-normal sum distribution using a hazard rate twisting technique

KAUST Repository

Rached, Nadhir B.

2015-06-08

The probability density function of the sum of Log-normally distributed random variables (RVs) is a well-known challenging problem. For instance, an analytical closed-form expression of the Log-normal sum distribution does not exist and is still an open problem. A crude Monte Carlo (MC) simulation is of course an alternative approach. However, this technique is computationally expensive especially when dealing with rare events (i.e. events with very small probabilities). Importance Sampling (IS) is a method that improves the computational efficiency of MC simulations. In this paper, we develop an efficient IS method for the estimation of the Complementary Cumulative Distribution Function (CCDF) of the sum of independent and not identically distributed Log-normal RVs. This technique is based on constructing a sampling distribution via twisting the hazard rate of the original probability measure. Our main result is that the estimation of the CCDF is asymptotically optimal using the proposed IS hazard rate twisting technique. We also offer some selected simulation results illustrating the considerable computational gain of the IS method compared to the naive MC simulation approach.

A fast simulation method for the Log-normal sum distribution using a hazard rate twisting technique

KAUST Repository

Rached, Nadhir B.; Benkhelifa, Fatma; Alouini, Mohamed-Slim; Tempone, Raul

2015-01-01

The probability density function of the sum of Log-normally distributed random variables (RVs) is a well-known challenging problem. For instance, an analytical closed-form expression of the Log-normal sum distribution does not exist and is still an open problem. A crude Monte Carlo (MC) simulation is of course an alternative approach. However, this technique is computationally expensive especially when dealing with rare events (i.e. events with very small probabilities). Importance Sampling (IS) is a method that improves the computational efficiency of MC simulations. In this paper, we develop an efficient IS method for the estimation of the Complementary Cumulative Distribution Function (CCDF) of the sum of independent and not identically distributed Log-normal RVs. This technique is based on constructing a sampling distribution via twisting the hazard rate of the original probability measure. Our main result is that the estimation of the CCDF is asymptotically optimal using the proposed IS hazard rate twisting technique. We also offer some selected simulation results illustrating the considerable computational gain of the IS method compared to the naive MC simulation approach.

Quantification of Wellbore Leakage Risk Using Non-destructive Borehole Logging Techniques

Energy Technology Data Exchange (ETDEWEB)

Duguid, Andrew; Butsch, Robert; Cary, J.; Celia, Michael; Chugunov, Nikita; Gasda, Sarah; Hovorka, Susan; Ramakrishnan, T. S.; Stamp, Vicki; Thingelstad, Rebecca; Wang, James

2014-08-29

Well integrity is important at all potential CCS locations and may play a crucial role establishing leakage risk in areas where there is a high density of existing wells that could be impacted by the storage operations including depleted petroleum fields where EOR or CCS will occur. To address a need for risk quantification methods that can be directly applied to individual wells using borehole logging tools a study was conducted using data from five wells in Wyoming. The objectives of the study were: Objective 1: Develop methods to establish the baseline flow parameters (porosity and permeability or mobility) from individual measurements of the material properties and defects in a well. Objective 2: Develop a correlation between field flow-property data and cement logs that can be used to establish the flow-properties of well materials and well features using cement mapping tools. Objective 3: Establish a method that uses the flow-property model (Objective 2) to analyze the statistical uncertainties associated with individual well leakage that can provide basis for uncertainty in risk calculations. The project objectives were met through the logging of five wells in Carbon and Natrona County Wyoming to collect data that was used to estimate individual and average well flow properties and model the results using ultrasonic data collected during the logging. Three of the five wells provided data on point and average flow properties for well annuli. Data from the other two wells were used to create models of cement permeability and test whether information collected in one well could be used to characterize another well. The results of the in-situ point measurements were confirmed by the lab measurements sidewall cores collected near the same depths Objective 1 was met using the data collected through logging, testing, and sampling. The methods were developed that can establish baseline flow parameters of wells by both point and average test methods. The methods to

The nuclear magnetic resonance well logging

International Nuclear Information System (INIS)

Zhang Yumin; Shen Huitang

2003-01-01

In this paper, the characteristic of the nuclear magnetic resonance logging is described at first. Then its development and its principle is presented. Compared with the nuclear magnetic resonance spectrometer, the magnet techniques is the first question that we must solve in the manufacture of the NMR well logging

Pulsed neutron uranium borehole logging with prompt fission neutrons

International Nuclear Information System (INIS)

Bivens, H.M.; Smith, G.W.; Jensen, D.H.

1976-01-01

The gross count natural gamma log normally used for uranium borehole logging is seriously affected by disequilibrium. Methods for the direct measurement of uranium, such as neutron logging, which are not affected by disequilibrium have been the object of considerable effort in recent years. This paper describes a logging system for uranium which uses a small accelerator to generate pulses of 14 MeV neutrons to detect and assay uranium by the measurement of prompt fission neutrons in the epithermal energy range. After an initial feasibility study, a prototype logging probe was built for field evaluation which began in January 1976. Physical and operational characteristics of the prototype probe, the neutron tube-transformer assembly, and the neutron tube are described. In logging operations, only the epithermal prompt fission neutrons detected between 250 microseconds to 2500 microseconds following the excitation neutron pulse are counted. Comparison of corrected neutron logs with the conventional gross count natural gamma logs and the chemical assays of cores from boreholes are shown. The results obtained with this neutron probe clearly demonstrate its advantages over the gross count natural gamma log, although at this time the accuracy of the neutron log assay is not satisfactory under some conditions. The necessary correction factors for various borehole and formation parameters are being determined and, when applied, should improve the assay accuracy

Latent log-linear models for handwritten digit classification.

Science.gov (United States)

Deselaers, Thomas; Gass, Tobias; Heigold, Georg; Ney, Hermann

2012-06-01

We present latent log-linear models, an extension of log-linear models incorporating latent variables, and we propose two applications thereof: log-linear mixture models and image deformation-aware log-linear models. The resulting models are fully discriminative, can be trained efficiently, and the model complexity can be controlled. Log-linear mixture models offer additional flexibility within the log-linear modeling framework. Unlike previous approaches, the image deformation-aware model directly considers image deformations and allows for a discriminative training of the deformation parameters. Both are trained using alternating optimization. For certain variants, convergence to a stationary point is guaranteed and, in practice, even variants without this guarantee converge and find models that perform well. We tune the methods on the USPS data set and evaluate on the MNIST data set, demonstrating the generalization capabilities of our proposed models. Our models, although using significantly fewer parameters, are able to obtain competitive results with models proposed in the literature.

Source rock formation evaluation using TOC & Ro log model based on well-log data procesing: study case of Ngimbang formation, North East Java basin

Directory of Open Access Journals (Sweden)

Fatahillah Yosar

2017-01-01

Full Text Available Ngimbang Formation is known as one major source of hydrocarbon supply in the North Eastern Java Basin. Aged Mid-Eocene, Ngimbang is dominated by sedimentary clastic rocks mostly shale, shaly sandstone, and thick layers of limestone (CD Limestone, with thin layers of coal. Although, laboratory analyses show the Ngimbang Formation to be a relatively rich source-rocks, such data are typically too limited to regionally quantify the distribution of organic matter. To adequately sample the formation both horizontally and vertically on a basin–wide scale, large number of costly and time consuming laboratory analyses would be required. Such analyses are prone to errors from a number of sources, and core data are frequently not available at key locations. In this paper, the authors established four TOC (Total Organic Carbon Content logging calculation models; Passey, Schmoker-Hester, Meyer-Nederloff, and Decker/Density Model by considering the geology of Ngimbang. Well data along with its available core data was used to determine the most suitable model to be applied in the well AFA-1, as well as to compare the accuracy of these TOC model values. The result shows good correlation using Decker (TOC Model and Mallick-Raju (Ro- Vitrinite Reflectance Model. Two source rocks potential zones were detected by these log models.

Neutron logging reliability techniques and apparatus

International Nuclear Information System (INIS)

Johnstone, C.W.

1978-01-01

This invention relates in general to neutron logging of earth formations, and in particular, to novel apparatus and procedures for determining the validity, or reliability, of data derived at least in part by logging neutron characteristics of earth formations and, if desired, for affording verifiably accurate indications of such data

Neutron logging reliability techniques and apparatus

International Nuclear Information System (INIS)

Johnstone, C.W.

1974-01-01

This invention relates in general to neutron logging of earth formations, and in particular, to novel apparatus and procedures for determining the validity, or reliability, of data derived at least in part by logging neutron characteristics of earth formations and, if desired, for affording verifiably accurate indications of such data. (author)

Towards an entropy-based analysis of log variability

DEFF Research Database (Denmark)

Back, Christoffer Olling; Debois, Søren; Slaats, Tijs

2017-01-01

the development of hybrid miners: given a (sub-)log, can we determine a priori whether the log is best suited for imperative or declarative mining? We propose using the concept of entropy, commonly used in information theory. We consider different measures for entropy that could be applied and show through...... experimentation on both synthetic and real-life logs that these entropy measures do indeed give insights into the complexity of the log and can act as an indicator of which mining paradigm should be used....

Towards an Entropy-based Analysis of Log Variability

DEFF Research Database (Denmark)

Back, Christoffer Olling; Debois, Søren; Slaats, Tijs

2018-01-01

the development of hybrid miners: given a log, can we determine a priori whether the log is best suited for imperative or declarative mining? We propose using the concept of entropy, commonly used in information theory. We consider different measures for entropy that could be applied and show through...... experimentation on both synthetic and real-life logs that these entropy measures do indeed give insights into the complexity of the log and can act as an indicator of which mining paradigm should be used....

Inversion of a lateral log using neural networks

International Nuclear Information System (INIS)

Garcia, G.; Whitman, W.W.

1992-01-01

In this paper a technique using neural networks is demonstrated for the inversion of a lateral log. The lateral log is simulated by a finite difference method which in turn is used as an input to a backpropagation neural network. An initial guess earth model is generated from the neural network, which is then input to a Marquardt inversion. The neural network reacts to gross and subtle data features in actual logs and produces a response inferred from the knowledge stored in the network during a training process. The neural network inversion of lateral logs is tested on synthetic and field data. Tests using field data resulted in a final earth model whose simulated lateral is in good agreement with the actual log data

Ordinal Log-Linear Models for Contingency Tables

Directory of Open Access Journals (Sweden)

Brzezińska Justyna

2016-12-01

Full Text Available A log-linear analysis is a method providing a comprehensive scheme to describe the association for categorical variables in a contingency table. The log-linear model specifies how the expected counts depend on the levels of the categorical variables for these cells and provide detailed information on the associations. The aim of this paper is to present theoretical, as well as empirical, aspects of ordinal log-linear models used for contingency tables with ordinal variables. We introduce log-linear models for ordinal variables: linear-by-linear association, row effect model, column effect model and RC Goodman’s model. Algorithm, advantages and disadvantages will be discussed in the paper. An empirical analysis will be conducted with the use of R.

Mechanics of log calibration

International Nuclear Information System (INIS)

Waller, W.C.; Cram, M.E.; Hall, J.E.

1975-01-01

For any measurement to have meaning, it must be related to generally accepted standard units by a valid and specified system of comparison. To calibrate well-logging tools, sensing systems are designed which produce consistent and repeatable indications over the range for which the tool was intended. The basics of calibration theory, procedures, and calibration record presentations are reviewed. Calibrations for induction, electrical, radioactivity, and sonic logging tools will be discussed. The authors' intent is to provide an understanding of the sources of errors, of the way errors are minimized in the calibration process, and of the significance of changes in recorded calibration data

Data Cleaning Methods for Client and Proxy Logs

NARCIS (Netherlands)

Weinreich, H.; Obendorf, H.; Herder, E.; Edmonds, A.; Hawkey, K.; Kellar, M.; Turnbull, D.

2006-01-01

In this paper we present our experiences with the cleaning of Web client and proxy usage logs, based on a long-term browsing study with 25 participants. A detailed clickstream log, recorded using a Web intermediary, was combined with a second log of user interface actions, which was captured by a

Financial and Economic Analysis of Reduced Impact Logging

Science.gov (United States)

Tom Holmes

2016-01-01

Concern regarding extensive damage to tropical forests resulting from logging increased dramatically after World War II when mechanized logging systems developed in industrialized countries were deployed in the tropics. As a consequence, tropical foresters began developing logging procedures that were more environmentally benign, and by the 1990s, these practices began...

Using Web Server Logs in Evaluating Instructional Web Sites.

Science.gov (United States)

Ingram, Albert L.

2000-01-01

Web server logs contain a great deal of information about who uses a Web site and how they use it. This article discusses the analysis of Web logs for instructional Web sites; reviews the data stored in most Web server logs; demonstrates what further information can be gleaned from the logs; and discusses analyzing that information for the…

Effects of seed predators of different body size on seed mortality in Bornean logged forest.

Science.gov (United States)

Hautier, Yann; Saner, Philippe; Philipson, Christopher; Bagchi, Robert; Ong, Robert C; Hector, Andy

2010-07-19

The Janzen-Connell hypothesis proposes that seed and seedling enemies play a major role in maintaining high levels of tree diversity in tropical forests. However, human disturbance may alter guilds of seed predators including their body size distribution. These changes have the potential to affect seedling survival in logged forest and may alter forest composition and diversity. We manipulated seed density in plots beneath con- and heterospecific adult trees within a logged forest and excluded vertebrate predators of different body sizes using cages. We show that small and large-bodied predators differed in their effect on con- and heterospecific seedling mortality. In combination small and large-bodied predators dramatically decreased both con- and heterospecific seedling survival. In contrast, when larger-bodied predators were excluded small-bodied predators reduced conspecific seed survival leaving seeds coming from the distant tree of a different species. Our results suggest that seed survival is affected differently by vertebrate predators according to their body size. Therefore, changes in the body size structure of the seed predator community in logged forests may change patterns of seed mortality and potentially affect recruitment and community composition.

Pendugaan Dinamika Struktur Tegakan Hutan Alam Bekas Tebangan (Estimation of Stand Structure Dynamics of Logged-over Natural Forests

Directory of Open Access Journals (Sweden)

Muhdin .

2011-07-01

Full Text Available Dynamics of stand structure (DST, which could indicate the growth performance of logged-over forests, mayvary depending on various factors, e.g. stand density, initial stand structure, species composition, time afterlogging, and environmental factors (rainfall, elevation, etc..  The variations of such factors could result in thevariations of DST’s components (e.g. proportion of trees upgrowth and staying. However, this study, which used75 permanent sample plots data of lowland and dryland natural forests in Kalimantan, showed that the proportionof trees upgrowth and staying could not be predicted satisfactorily using the number of trees, stand basal area,time after logging, and elevation as independent variables in multiple linear regression models. The regressionmodels produced unrealistic projections of stand structures.  In contrast, the projection of stand structures usingthe DST’s components that were calculated using arithmetic mean was better than that of the regression models.Keywords: stand structure projection, upgrowth, natural forest, logged-over area

Gas hydrate saturation from acoustic impedance and resistivity logs in the shenhu area, south china sea

Science.gov (United States)

Wang, X.; Wu, S.; Lee, M.; Guo, Y.; Yang, S.; Liang, J.

2011-01-01

During the China's first gas hydrate drilling expedition -1 (GMGS-1), gas hydrate was discovered in layers ranging from 10 to 25 m above the base of gas hydrate stability zone in the Shenhu area, South China Sea. Water chemistry, electrical resistivity logs, and acoustic impedance were used to estimate gas hydrate saturations. Gas hydrate saturations estimated from the chloride concentrations range from 0 to 43% of the pore space. The higher gas hydrate saturations were present in the depth from 152 to 177 m at site SH7 and from 190 to 225 m at site SH2, respectively. Gas hydrate saturations estimated from the resistivity using Archie equation have similar trends to those from chloride concentrations. To examine the variability of gas hydrate saturations away from the wells, acoustic impedances calculated from the 3 D seismic data using constrained sparse inversion method were used. Well logs acquired at site SH7 were incorporated into the inversion by establishing a relation between the water-filled porosity, calculated using gas hydrate saturations estimated from the resistivity logs, and the acoustic impedance, calculated from density and velocity logs. Gas hydrate saturations estimated from acoustic impedance of seismic data are ???10-23% of the pore space and are comparable to those estimated from the well logs. The uncertainties in estimated gas hydrate saturations from seismic acoustic impedances were mainly from uncertainties associated with inverted acoustic impedance, the empirical relation between the water-filled porosities and acoustic impedances, and assumed background resistivity. ?? 2011 Elsevier Ltd.

Azimuthally acoustic logging tool to evaluate cementing quality

International Nuclear Information System (INIS)

Lu, Junqiang; Ju, Xiaodong; Qiao, Wenxiao; Men, Baiyong; Wang, Ruijia; Wu, Jinping

2014-01-01

An azimuthally sensitive acoustic bond tool (AABT) uses a phased arc array transmitter that can provide directionally focused radiation. The acoustic sonde consists of a phased arc array transmitter and two monopole receivers, the spaces from the transmitter being 0.91 m and 1.52 m, respectively. The transmitter includes eight transducer sub-units. By controlling the high-voltage firing signal phase for each transmitter, the radiation energy of the phased arc array transducer can be focused in a single direction. Compared with conventional monopole and dipole transmitters, the new transmitter provides cement quality evaluation with azimuthal sensitivity, which is not possible with conventional cement bond log/variable density log tools. Laboratory measurements indicate that the directivity curves for the phased arc array and those computed theoretically are consistent and show good agreement. We acquire measurements from a laboratory cistern and from the field to validate the reliability and applicability of the AABT. Results indicate that the AABT accurately evaluates the azimuthal cement quality of case-cement interfaces by imaging the amplitude of the first-arrival wave. This tool visualizes the size, position and orientation of channeling and holes. In the case of good case-cement bonding, the AABT also evaluates the azimuthal cementing quality of the cement formation interface by imaging the amplitude of formation waves. (paper)

Effects of a primordial magnetic field with log-normal distribution on the cosmic microwave background

International Nuclear Information System (INIS)

Yamazaki, Dai G.; Ichiki, Kiyotomo; Takahashi, Keitaro

2011-01-01

We study the effect of primordial magnetic fields (PMFs) on the anisotropies of the cosmic microwave background (CMB). We assume the spectrum of PMFs is described by log-normal distribution which has a characteristic scale, rather than power-law spectrum. This scale is expected to reflect the generation mechanisms and our analysis is complementary to previous studies with power-law spectrum. We calculate power spectra of energy density and Lorentz force of the log-normal PMFs, and then calculate CMB temperature and polarization angular power spectra from scalar, vector, and tensor modes of perturbations generated from such PMFs. By comparing these spectra with WMAP7, QUaD, CBI, Boomerang, and ACBAR data sets, we find that the current CMB data set places the strongest constraint at k≅10 -2.5 Mpc -1 with the upper limit B < or approx. 3 nG.

PUMA Internet Task Logging Using the IDAC-1

Directory of Open Access Journals (Sweden)

K. N. Tarchanidis

2014-08-01

Full Text Available This project uses an IDAC-1 board to sample the joint angle position of the PUMA 76 1 robot and log the results on a computer. The robot is at the task location and the logging computer is located in a different one. The task the robot is performing is based on a Pseudo Stereo Vision System (PSVS. Internet is the transport media. The protocol used in this project is UDP/IP. The actual angle is taken straight from the PUMA controller. High-resolution potentiometers are connected on each robot joint and are buffered and sampled as potential difference on an A/D converter integrated on the IDAC-1. The logging computer through the Internet acting as client asks for the angle set, the IDAC-1 responds as server with the 10-bit resolution sampling of the joint position. The whole task is logged in a file on the logging computer. This application can give the ability to the Internet user to monitor and log the robot tasks anywhere in the Word Wide Web (www.

Neutron--neutron logging

International Nuclear Information System (INIS)

Allen, L.S.

1977-01-01

A borehole logging tool includes a steady-state source of fast neutrons, two epithermal neutron detectors, and two thermal neutron detectors. A count rate meter is connected to each neutron detector. A first ratio detector provides an indication of the porosity of the formation surrounding the borehole by determining the ratio of the outputs of the two count rate meters connected to the two epithermal neutron detectors. A second ratio detector provides an indication of both porosity and macroscopic absorption cross section of the formation surrounding the borehole by determining the ratio of the outputs of the two count rate meters connected to the two thermal neutron detectors. By comparing the signals of the two ratio detectors, oil bearing zones and salt water bearing zones within the formation being logged can be distinguished and the amount of oil saturation can be determined. 6 claims, 2 figures

An approach to derive some simple empirical equations to calibrate nuclear and acoustic well logging tools.

Science.gov (United States)

Mohammad Al Alfy, Ibrahim

2018-01-01

A set of three pads was constructed from primary materials (sand, gravel and cement) to calibrate the gamma-gamma density tool. A simple equation was devised to convert the qualitative cps values to quantitative g/cc values. The neutron-neutron porosity tool measures the qualitative cps porosity values. A direct equation was derived to calculate the porosity percentage from the cps porosity values. Cement-bond log illustrates the cement quantities, which surround well pipes. This log needs a difficult process due to the existence of various parameters, such as: drilling well diameter as well as internal diameter, thickness and type of well pipes. An equation was invented to calculate the cement percentage at standard conditions. This equation can be modified according to varying conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Lacunarity of geophysical well logs in the Cantarell oil field, Gulf of Mexico

Energy Technology Data Exchange (ETDEWEB)

Arizabalo, Ruben Dario [Instituto Mexicano del Petroleo, Mexico, D.F. (Mexico); Oleschko, Klavdia [Centro de Geociencias, Universidad Nacional Autonoma de Mexico, Juriquilla, Queretaro (Mexico); Korvin, Gabor [King Fahd University, Dhahran (Saudi Arabia); Lozada, Manuel [Instituto Mexicano del Petroleo, Mexico, D.F. (Mexico); Castrejon, Ricardo [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico); Ronquillo, Gerardo [Instituto Mexicano del Petroleo, Mexico, D.F. (Mexico)

2006-04-15

Lacunarity and fractal variations in geophysical well logs are associated with stratigraphic and petrophysical properties of the naturally fractured Cantarell field in the Gulf of Mexico. Neutron porosity (NPHI), density (RHOB, DRHO, PEF), resistivity (LLD, LLS, MSFL), natural radioactivity (GR, CGR, URAN, POTA, THOR) and caliper (CALI) logs are studied. The resistivity logs yielded remarkably high lacunarity values, especially in the hydrocarbon source- and reservoir rocks. Lacunarity {delta} was found to depend on the resolution and radial depth of penetration of the logging method. It systematically increased in the following order: {delta}(RHOB) < {delta}(CALI) < {delta}(PEF) < {delta}(URAN) < {delta}(GR) < {delta}(NPHI) < {delta}(POTA) < {delta}(CGR) < {delta}(THOR) < {delta}(MSFL) < {delta}(DRHO) < {delta}(LLS) < {delta}(LLD). [Spanish] En este trabajo fueron analizadas las variaciones fractales y de lagunaridad de los registros geofisicos de pozo, con el fin de asociarlos con las propiedades estratigraficas y petrofisicas del yacimiento naturalmente fracturado de Cantarell, en el Golfo de Mexico. Los registros considerados fueron: porosidad neutron (NPHI), densidad (RHOB, DRHO, PEF), resistividad (LLD, LLS, MSFL), radiactividad natural (GR, CGR, URAN, POTA, THOR) y caliper (CALI). Los registros de resistividad produjeron valores de lagunaridad notablemente altos, especialmente en las rocas generadoras y almacenadoras, a diferencia de los demas registros, cuya homogeneidad de traza implico una baja lagunaridad. Los resultados indican que la lagunaridad observada depende de la resolucion y profundidad radial de penetracion del metodo geofisico estudiado y aumenta sistematicamente en el siguiente orden: {delta}(RHOB) < {delta}(CALI) < {delta}(PEF) < {delta}(URAN) < {delta}(GR) < {delta}(NPHI) < {delta}(POTA) < {delta}(CGR) < {delta}(THOR) < {delta}(MSFL) < {delta}(DRHO) < {delta}(LLS) < {delta}(LLD).

Acoustic reflection log in transversely isotropic formations

Science.gov (United States)

Ronquillo Jarillo, G.; Markova, I.; Markov, M.

2018-01-01

We have calculated the waveforms of sonic reflection logging for a fluid-filled borehole located in a transversely isotropic rock. Calculations have been performed for an acoustic impulse source with the characteristic frequency of tens of kilohertz that is considerably less than the frequencies of acoustic borehole imaging tools. It is assumed that the borehole axis coincides with the axis of symmetry of the transversely isotropic rock. It was shown that the reflected wave was excited most efficiently at resonant frequencies. These frequencies are close to the frequencies of oscillations of a fluid column located in an absolutely rigid hollow cylinder. We have shown that the acoustic reverberation is controlled by the acoustic impedance of the rock Z = Vphρs for fixed parameters of the borehole fluid, where Vph is the velocity of horizontally propagating P-wave; ρs is the rock density. The methods of waveform processing to determine the parameters characterizing the reflected wave have been discussed.

Synthetic rope applications in Appalachian logging

Science.gov (United States)

Ben D. Spong; Jingxin Wang

2008-01-01

New ultra-high molecular weight polyethylene rope has shown good results as a replacement for wire rope in logging applications in the western United States. A single case study trial was performed in Appalachian forest conditions to assess the appropriateness of this technology for hardwood logging applications. The study focused on use of the rope in West Virginia...

A survey of animal-powered logging in Alabama

Science.gov (United States)

Christopher W. Toms; Mark R. Dubois; John C. Bliss; John H. Wilhoit; Robert B. Rummer

2001-01-01

In a state with a very large, highly mechanized timber harvesting industry, animal-powered logging still occupies a niche in Alabama as a small-scale harvesting alternative. This article summarizes the results from a study that examined the extent of animal logging in Alabama. We investigated this topic by asking who is logging with animals, where are they working,...

Sediment transport and soil disturbance after postfire logging.

Science.gov (United States)

James D. McIver

2003-01-01

Recently there has been considerable debate on the practice of postfire logging, in which burned forests are entered soon after fire to recover commercially valuable trees. Proponents of the practice argue that postfire logging is part of a 'restoration package' that can be used to control erosion (e.g., contour logging) and can help to mitigate costs of...

Use of pulsed neutron-neutron logging, thermal neutron-neutron logging, and gamma logging methods in classification for sand-clay sediments of Lower Cretaceous in Prikumsk oil-and-gas region according to filtration-capacitance characteristics

International Nuclear Information System (INIS)

Maksimenko, A.N.; Basin, Ya.N.; Novgorodov, V.A.

1974-01-01

To isolate reservoirs, the formation and deformation penetration zone parameters are used. They are estimated according to the false oil saturation factor and the time of the penetration zone deformation which are determined from the complex exploration of cased wells using the pulse neutron logging, thermal neutron-neutron logging and gamma logging techniques

Supply of Rubber Wood Log in Malaysia

OpenAIRE

Noraida, A. W.; Abdul-Rahim, A. S.

2014-01-01

Issue on shortage of raw material for wood processing solved by discovery of rubber wood log as one of the substitutes the natural log. This paper examines the supply of rubber wood log in Malaysia. We employ ARDL Bound Approach Test and time series data from 1980 to 2010 which represented the whole Malaysia are used to achieve the established objectives. The result shown, in the long run harvested area and wages have 1% and 10% significant level respectively. While in the short run, there wa...

Screening efficacy of a simplified logMAR chart

Directory of Open Access Journals (Sweden)

Naganathan Muthuramalingam

2016-04-01

Aim: This study evaluates the efficacy of a simplified logMAR chart, designed for VA testing over the conventional Snellen chart, in a school-based vision-screening programme. Methods: We designed a simplified logMAR chart by employing the principles of the Early Treatment Diabetic Retinopathy Study (ETDRS chart in terms of logarithmic letter size progression, inter-letter spacing, and inter-line spacing. Once the simplified logMAR chart was validated by students in the Elite school vision-screening programme, we set out to test the chart in 88 primary and middle schools in the Tiruporur block of Kancheepuram district in Tamil Nadu. One school teacher in each school was trained to screen a cross-sectional population of 10 354 primary and secondary school children (girls: 5488; boys: 4866 for VA deficits using a new, simplified logMAR algorithm. An experienced paediatric optometrist was recruited to validate the screening methods and technique used by the teachers to collect the data. Results: The optometrist screened a subset of 1300 school children from the total sample. The optometrist provided the professional insights needed to validate the clinical efficacy of the simplified logMAR algorithm and verified the reliability of the data collected by the teachers. The mean age of children sampled for validation was 8.6 years (range: 9–14 years. The sensitivity and the specificity of the simplified logMAR chart when compared to the standard logMAR chart were found to be 95% and 98%, respectively. Kappa value was 0.97. Sensitivity of the teachers’ screening was 66.63% (95% confidence interval [CI]: 52.73–77.02 and the specificity was 98.33% (95% CI: 97.49–98.95. Testing of VA was done under substandard illumination levels in 87% of the population. A total of 10 354 children were screened, 425 of whom were found to have some form of visual and/or ocular defect that was identified by the teacher or optometrist. Conclusion: The simplified logMAR testing algorithm

National logging program for the National Uranium Resource Evaluation. Final report

International Nuclear Information System (INIS)

The Mineral Engineering Division (MED) of High Life Helicopters, Inc., operated from May, 1979, through August, 1981, as a subcontractor to the Department of Energy (DOE) to acquire downhole geophysical log information in support of the National Uranium Resource Evaluation program (NURE). MED acquired downhole geophysical log information in 26 1 0 x 2 0 NTMS quadrangles in Colorado, Montana, Nebraska, North Dakota, South Dakota, and Wyoming. MED obtained the log information by gaining permission to log oil and gas wells, water wells, and coal exploration holes. Actual geophysical logging was subcontracted to Century Geophysical Corporation. After logging of each well and completed, MED submitted the log information and other pertinent data to Bendix Field Engineering Corporation (BFEC) for evaluation. MED collected over 700,000 feet of geophysical logs. Additionally, MED conducted a search of log libraries for existing log data for twelve of the quadrangles included in the program. It should be noted that ERTEC, Inc. conducted geophysical logging and a log library search to five quadrangles in Wyoming. These areas were later assigned to MED. The location of all wells logged by MED and ERTEC and the location of other log data is shown on the enclosed maps. Detailed information that pertains to each well is provided following each map

Determination of organic-matter content of Appalachian Devonian shales from gamma-ray logs

International Nuclear Information System (INIS)

Schmoker, J.W.

1981-01-01

The organic-matter content of the Devonian shale of the Appalachian basin is important for assessing the natural-gas resources of these rocks, and patterns of organic-matter distribution convey information on sedimentary processes and depositional environment. In most of the western part of the Appalachian basin the organic-matter content of the Devonian shale can be estimated from gamma-ray wire-line logs using the equation: phi 0 = (γ/sub B/ - γ)/1.378A, where phi 0 is the organic-matter content of the shale (fractional volume), γ the gamma-ray intensity (API units), γ/sub B/ the gamma-ray intensity if no organic matter is present (API units), and A the slope of the crossplot of gamma-ray intensity and formation density (API units/(g/cm 3 )). Organic-matter contents estimated using this equation are compared with organic-matter contents determined from direct laboratory analyses of organic carbon for 74 intervals of varying thickness from 12 widely separated wells. The organic-matter content of these intervals ranges from near zero to about 20% by volume. The gamma-ray intensity of the Cleveland Member of the Ohio Shale and the lower part of the Olentangy Shale is anomalously low compared to other Devonian shales of similar richness, so that organic-matter content computed for each of these units from gamma-ray logs is likely to be too low. Wire-line methods for estimating organic-matter content have the advantages of economy, readily available sources of data, and continuous sampling of the vertically heterogenous shale section. The gamma-ray log, in particular, is commonly run in the Devonian shale, its response characteristics are well known, and the cumulative pool of gamma-ray logs forms a large and geographically broad data base. The quantitative computation of organic-matter content from gamma-ray logs should be of practical value in studies of the Appalachian Devonian shale. 16 figures

Effects of reduced-impact logging on fish assemblages in central Amazonia.

Science.gov (United States)

Dias, Murilo S; Magnusson, William E; Zuanon, Jansen

2010-02-01

In Amazonia reduced-impact logging, which is meant to reduce environmental disturbance by controlling stem-fall directions and minimizing construction of access roads, has been applied to large areas containing thousands of streams. We investigated the effects of reduced-impact logging on environmental variables and the composition of fish in forest streams in a commercial logging concession in central Amazonia, Amazonas State, Brazil. To evaluate short-term effects, we sampled 11 streams before and after logging in one harvest area. We evaluated medium-term effects by comparing streams in 11 harvest areas logged 1-8 years before the study with control streams in adjacent areas. Each sampling unit was a 50-m stream section. The tetras Pyrrhulina brevis and Hemigrammus cf. pretoensis had higher abundances in plots logged > or =3 years before compared with plots logged fish composition did not differ two months before and immediately after reduced-impact logging. Temperature and pH varied before and after logging, but those differences were compatible with normal seasonal variation. In the medium term, temperature and cover of logs were lower in logged plots. Differences in ordination scores on the basis of relative fish abundance between streams in control and logged areas changed with time since logging, mainly because some common species increased in abundance after logging. There was no evidence of species loss from the logging concession, but differences in log cover and ordination scores derived from relative abundance of fish species persisted even after 8 years. For Amazonian streams, reduced-impact logging appears to be a viable alternative to clear-cut practices, which severely affect aquatic communities. Nevertheless, detailed studies are necessary to evaluated subtle long-term effects.

Nonblocking and orphan free message logging protocols

Science.gov (United States)

Alvisi, Lorenzo; Hoppe, Bruce; Marzullo, Keith

1992-12-01

Currently existing message logging protocols demonstrate a classic pessimistic vs. optimistic tradeoff. We show that the optimistic-pessimistic tradeoff is not inherent to the problem of message logging. We construct a message-logging protocol that has the positive features of both optimistic and pessimistic protocol: our protocol prevents orphans and allows simple failure recovery; however, it requires no blocking in failure-free runs. Furthermore, this protocol does not introduce any additional message overhead as compared to one implemented for a system in which messages may be lost but processes do not crash.

An economic alternative to conventional open hole logging in horizontal wells; Eine oekonomische Alternative zu konventionellen Bohrlochmessungen in Horizontalbohrungen

Energy Technology Data Exchange (ETDEWEB)

Hogan, G.P.; Kater, H.; Ball, S.; Preiss, F. [Precision Drilling-Computalog, Edemissen (Germany)

2003-04-01

Horizontal drilling has become a routine method of field development over the past several years as a means to maximise recoverable reserves. As such, horizontal drilling has impacted the way that petrophysical data is obtained in order to evaluate the reservoir during and after drilling. In horizontal wells, conventional open hole logging methods must be combined with either pipe conveyed logging techniques or coiled tubing conveyed techniques. In many cases, these procedures are time consuming and cost prohibitive based on the economics of the project. Additionally, formation evaluation data may be obtained in horizontal wells by using Logging While Drilling (LWD) technology, but this may also be cost prohibitive in many areas. In the Girkaliai and Nausodis Fields in Lithuania, two wells were drilled to reach oil producing reservoir sandstones at depths of over 1,800 m TVD with horizontal sections of approximately 270 m and 385 m. Based on an economic and petrophysical analysis, neither open hole pipe conveyed logging nor LSW were considered since neither were regarded as cost effective to obtain the petrophysical data required to evaluate the reservoir. An alternative method to obtain critical formation evaluation data was employed utilizing a cased hole pulsed neutron decay logging tool run in the open hole. In one case this was done immediately after drilling. The pulsed neutron decay logging tool was conveyed to TD by a specially modified wireline tractor system. The obtained logs provided critical information to evaluate the reservoir including determining density porosity, neutron porosity, sigma (formation capture cross section) and gamma ray. The data was used to calculate required petrophysical information including lithology, water saturation, and bulk volumes. (orig.)

Construction and validation of a Tamil logMAR chart.

Science.gov (United States)

Varadharajan, Srinivasa; Srinivasan, Krithica; Kumaresan, Brindha

2009-09-01

To design, construct and validate a new Tamil logMAR visual acuity chart based on current recommendations. Ten Tamil letters of equal legibility were identified experimentally and were used in the chart. Two charts, one internally illuminated and one externally illuminated, were constructed for testing at 4 m distance. The repeatability of the two charts was tested. For validation, the two charts were compared with a standard English logMAR chart (ETDRS). When compared to the ETDRS chart, a difference of 0.06 +/- 0.07 and 0.07 +/- 0.07 logMAR was found for the internally and externally illuminated charts respectively. Limits of agreement between the internally illuminated Tamil logMAR chart and ETDRS chart were found to be (-0.08, 0.19), and (-0.07, 0.20) for the externally illuminated chart. The test - retest results showed a difference of 0.02 +/- 0.04 and 0.02 +/- 0.06 logMAR for the internally and externally illuminated charts respectively. Limits of agreement for repeated measurements for the internally illuminated Tamil logMAR chart were found to be (-0.06, 0.10), and (-0.10, 0.14) for the externally illuminated chart. The newly constructed Tamil logMAR charts have good repeatability. The difference in visual acuity scores between the newly constructed Tamil logMAR chart and the standard English logMAR chart was within acceptable limits. This new chart can be used for measuring visual acuity in the literate Tamil population.

Dual detector neutron lifetime log: theory and practical applications

International Nuclear Information System (INIS)

Serpas, C.J.; Wichmann, P.A.; Fertl, W.H.; DeVries, M.R.; Rndall, R.R.

1977-01-01

The Neutron Lifetime Log instrumentation has continued to evolve and now is equipped with dual detectors for increased ease in gas detection and also a ratio response for a simultaneous porosity determination. A good deal of experimentation was involved to minimize both lithology and salinity effects on the porosity indication. This paper contains a discussion of the theory and concepts related to the application of the Dual Detector Neutron Lifetime Log (DNLL). It is important to note that with these advances the recording of thermal neutron capture cross section (Σ) remains consistent with the past measurements of earlier generations of instruments as the most accurate determination of this parameter. A number of field examples of the newly logged results are shown. These field cases include Dual Detector NLL's run thru the drill strings of highly deviated holes when difficulties were encountered in getting conventional open hole logs to bottom, logs thru open perforations and hot radioactive zones, comparisons of the large and small diameter instruments, logs with anomalous fluids in the annulus, logs thru multiple casing strings, and a number of other examples

Extracting the Textual and Temporal Structure of Supercomputing Logs

Energy Technology Data Exchange (ETDEWEB)

Jain, S; Singh, I; Chandra, A; Zhang, Z; Bronevetsky, G

2009-05-26

Supercomputers are prone to frequent faults that adversely affect their performance, reliability and functionality. System logs collected on these systems are a valuable resource of information about their operational status and health. However, their massive size, complexity, and lack of standard format makes it difficult to automatically extract information that can be used to improve system management. In this work we propose a novel method to succinctly represent the contents of supercomputing logs, by using textual clustering to automatically find the syntactic structures of log messages. This information is used to automatically classify messages into semantic groups via an online clustering algorithm. Further, we describe a methodology for using the temporal proximity between groups of log messages to identify correlated events in the system. We apply our proposed methods to two large, publicly available supercomputing logs and show that our technique features nearly perfect accuracy for online log-classification and extracts meaningful structural and temporal message patterns that can be used to improve the accuracy of other log analysis techniques.

Cased-hole log analysis and reservoir performance monitoring

CERN Document Server

Bateman, Richard M

2015-01-01

This book addresses vital issues, such as the evaluation of shale gas reservoirs and their production. Topics include the cased-hole logging environment, reservoir fluid properties; flow regimes; temperature, noise, cement bond, and pulsed neutron logging; and casing inspection. Production logging charts and tables are included in the appendices. The work serves as a comprehensive reference for production engineers with upstream E&P companies, well logging service company employees, university students, and petroleum industry training professionals. This book also: ·       Provides methods of conveying production logging tools along horizontal well segments as well as measurements of formation electrical resistivity through casing ·       Covers new information on fluid flow characteristics in inclined pipe and provides new and improved nuclear tool measurements in cased wells ·       Includes updates on cased-hole wireline formation testing  

Toward an Automated Labeling of Event Log Attributes

DEFF Research Database (Denmark)

Abbad Andaloussi, Amine; Burattin, Andrea; Weber, Barbara

2018-01-01

information systems often do not comply with the required maturity level, since they lack the notion of process instance, also referred in process mining as “case id”. Without a proper identification of the case id attribute in log files, the outcome of process mining algorithms is unpredictable. This paper...... proposes a new approach that aims to overcome this challenge by automatically inferring the case id attribute from log files. The approach has been implemented as a ProM plugin and evaluated with several real-world event logs. The results demonstrate a high accuracy in inferring the case id attribute.......Process mining aims at exploring the data produced by executable business processes to mine the underlying control-flow and dataflow. Most of the process mining algorithms assume the existence of an event log with a certain maturity level. Unfortunately, the logs provided by process unaware...

Stand structure, composition and illegal logging in selectively logged production forests of Myanmar: Comparison of two compartments subject to different cutting frequency

Directory of Open Access Journals (Sweden)

Tual Cin Khai

2016-07-01

Full Text Available Appropriate cutting cycles and annual allowable cuts are crucial to ensure sustainability of tropical selective logging, but there have been limited field data to verify long-term effects of different cutting cycles. This study reveals some evidence of forest degradation in selectively logged production forests of Myanmar, which are subject to inappropriate cutting frequency. We compared stand structure, commercial species composition, and incidence of illegal logging between two compartments with low (LCF; 1 time and high (HCF; 5 times cutting frequency over a recent 18 years. Prior to the latest cutting, LCF had 176 trees ha−1 with an inverted-J shape distribution of diameter at breast height (DBH, including a substantial amount of teak (Tectona grandis and other commercially important species in each DBH class. HCF prior to the latest cut had only 41 trees ha−1 without many commercially important species. At HCF, nearly half the standing trees of various species and size were illegally cut following legal operations; this was for charcoal making in nearby kilns. At LCF, two species, teak and Xylia xylocarpa, were cut illegally and sawn for timber on the spot. More extensive and systematic surveys are needed to generalize the findings of forest degradation and illegal logging. However, our study calls for urgent reconsideration of logging practices with high cutting frequency, which can greatly degrade forests with accompanying illegal logging, and for rehabilitating strongly degraded, bamboo-dominated forests. To reduce illegal logging, it would be important to pay more attention on a MSS regulation stating that logging roads should be destroyed after logging operations.

Western tight gas sands advanced logging workshop proceedings

Energy Technology Data Exchange (ETDEWEB)

Jennings, J B; Carroll, Jr, H B [eds.

1982-04-01

An advanced logging research program is one major aspect of the Western Tight Sands Program. Purpose of this workshop is to help BETC define critical logging needs for tight gas sands and to allow free interchange of ideas on all aspects of the current logging research program. Sixteen papers and abstracts are included together with discussions. Separate abstracts have been prepared for the 12 papers. (DLC)

Pulsed neutron porosity logging system

International Nuclear Information System (INIS)

Smith, H.D. Jr.; Smith, M.P.; Schultz, W.E.

1978-01-01

An improved pulsed neutron porosity logging system is provided in the present invention. A logging tool provided with a 14 MeV pulsed neutron source, an epithermal neutron detector, and a fast neutron detector is moved through a borehole. Repetitive bursts of neutrons irradiate the earth formations and, during the bursts, the fast neutron population is sampled. During the interval between bursts the epithermal neutron population is sampled along with background gamma radiation due to lingering thermal neutrons. The fast and epithermal neutron population measurements are combined to provide a measurement of formation porosity

Specific features of well logging of boreholes drilled on electrical nonconducting solutions

International Nuclear Information System (INIS)

Ruchkin, A.F.; Fomenko, V.G.

1978-01-01

Methods for identification of permeable strata and determination of their porosity and oil-gas saturation using standard combination of geophysical investigations in the boreholes drilled with nonaqueous and inert drilling fluids are considered. Geophysical combination consists of the methods indications of which are independent on electrical conductivity of drilling fluids. They are all modifications of radioactivity logging (gamma logging, neutron logging, neutron-gamma logging, gamma-gamma logging, pulsed neutron logging, nuclear-magnetic logging), acoustic logging and thermal logging

A cement channel-detection technique using the pulsed-neutron log

International Nuclear Information System (INIS)

Myers, G.D.

1991-01-01

A channel-detection technique has been developed using boron solutions and pulsed-neutron logging (PNL) tools. This technique relies on the extremely high-neutron-absorption cross section that boron exhibits relative to other common elements, including chlorine. The PNL tool is used to detect movement of a boron solution in a log-inject-log procedure. The technique has identified channels in such difficult applications as logging through two strings of pipe and in highly deviated wellbores. Logging procedures are simple and cement channels can be readily identified. The boron solutions are relatively inexpensive, safe to handle, and nonradioactive. Additional PNL information for reservoir performance evaluation is collected simultaneously during channel-detection logging. This paper describes the theory, development, field application, and limitations of this channel-detection logging technique

Water saturation in shaly sands: logging parameters from log-derived values

International Nuclear Information System (INIS)

Miyairi, M.; Itoh, T.; Okabe, F.

1976-01-01

The methods are presented for determining the relation of porosity to formation factor and that of true resistivity of formation to water saturation, which were investigated through the log interpretation of one of the oil and gas fields of northern Japan Sea. The values of the coefficients ''a'' and ''m'' in porosity-formation factor relation are derived from cross-plot of porosity and resistivity of formation corrected by clay content. The saturation exponent ''n'' is determined from cross-plot of porosity and resistivity index on the assumption that the product of porosity and irreducible water saturation is constant. The relation of porosity to irreducible water saturation is also investigated from core analysis. The new logging parameters determined from the methods, a = 1, m = 2, n = 1.4, improved the values of water saturation by 6 percent in average, and made it easy to distinguish the points which belong to the productive zone and ones belonging to the nonproductive zone

Selection of logging-based TOC calculation methods for shale reservoirs: A case study of the Jiaoshiba shale gas field in the Sichuan Basin

Directory of Open Access Journals (Sweden)

Renchun Huang

2015-03-01

Full Text Available Various methods are available for calculating the TOC of shale reservoirs with logging data, and each method has its unique applicability and accuracy. So it is especially important to establish a regional experimental calculation model based on a thorough analysis of their applicability. With the Upper Ordovician Wufeng Fm-Lower Silurian Longmaxi Fm shale reservoirs as an example, TOC calculation models were built by use of the improved ΔlgR, bulk density, natural gamma spectroscopy, multi-fitting and volume model methods respectively, considering the previous research results and the geologic features of the area. These models were compared based on the core data. Finally, the bulk density method was selected as the regional experimental calculation model. Field practices demonstrated that the improved ΔlgR and natural gamma spectroscopy methods are poor in accuracy; although the multi-fitting method and bulk density method have relatively high accuracy, the bulk density method is simpler and wider in application. For further verifying its applicability, the bulk density method was applied to calculate the TOC of shale reservoirs in several key wells in the Jiaoshiba shale gas field, Sichuan Basin, and the calculation accuracy was clarified with the measured data of core samples, showing that the coincidence rate of logging-based TOC calculation is up to 90.5%–91.0%.

Body fat assessed from body density and estimated from skinfold thickness in normal children and children with cystic fibrosis.

Science.gov (United States)

Johnston, J L; Leong, M S; Checkland, E G; Zuberbuhler, P C; Conger, P R; Quinney, H A

1988-12-01

Body density and skinfold thickness at four sites were measured in 140 normal boys, 168 normal girls, and 6 boys and 7 girls with cystic fibrosis, all aged 8-14 y. Prediction equations for the normal boys and girls for the estimation of body-fat content from skinfold measurements were derived from linear regression of body density vs the log of the sum of the skinfold thickness. The relationship between body density and the log of the sum of the skinfold measurements differed from normal for the boys and girls with cystic fibrosis because of their high body density even though their large residual volume was corrected for. However the sum of skinfold measurements in the children with cystic fibrosis did not differ from normal. Thus body fat percent of these children with cystic fibrosis was underestimated when calculated from body density and invalid when calculated from skinfold thickness.

Use of pulsed neutron logging to evaluate perforation washing

International Nuclear Information System (INIS)

Dimon, C.A.

1986-01-01

This invention relates to the use of pulsed neutron logging techniques before and after perforation washing operations are performed to evaluate the degree of success of the perforation washing operations. Well logging operations of a type designed to respond to the difference between a formation immediately behind the well sheath and voids in the formation are performed both before and after the perforation washing operation. differences between the two resulting logs are then indicative of voids created by perforation washing. In a preferred embodiment, pulsed neutron logging is used as the logging technique, while a weighted brine having a high absorption cross section to pulsed neutrons is used as the perforation washing fluid

High-resolution well-log derived dielectric properties of gas-hydrate-bearing sediments, Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope

Science.gov (United States)

Sun, Y.; Goldberg, D.; Collett, T.; Hunter, R.

2011-01-01

A dielectric logging tool, electromagnetic propagation tool (EPT), was deployed in 2007 in the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well (Mount Elbert Well), North Slope, Alaska. The measured dielectric properties in the Mount Elbert well, combined with density log measurements, result in a vertical high-resolution (cm-scale) estimate of gas hydrate saturation. Two hydrate-bearing sand reservoirs about 20 m thick were identified using the EPT log and exhibited gas-hydrate saturation estimates ranging from 45% to 85%. In hydrate-bearing zones where variation of hole size and oil-based mud invasion are minimal, EPT-based gas hydrate saturation estimates on average agree well with lower vertical resolution estimates from the nuclear magnetic resonance logs; however, saturation and porosity estimates based on EPT logs are not reliable in intervals with substantial variations in borehole diameter and oil-based invasion.EPT log interpretation reveals many thin-bedded layers at various depths, both above and below the thick continuous hydrate occurrences, which range from 30-cm to about 1-m thick. Such thin layers are not indicated in other well logs, or from the visual observation of core, with the exception of the image log recorded by the oil-base microimager. We also observe that EPT dielectric measurements can be used to accurately detect fine-scale changes in lithology and pore fluid properties of hydrate-bearing sediments where variation of hole size is minimal. EPT measurements may thus provide high-resolution in-situ hydrate saturation estimates for comparison and calibration with laboratory analysis. ?? 2010 Elsevier Ltd.

Stress wave sorting of red maple logs for structural quality

Science.gov (United States)

Xiping Wang; Robert J. Ross; David W. Green; Brian Brashaw; Karl Englund; Michael Wolcott

2004-01-01

Existing log grading procedures in the United States make only visual assessments of log quality. These procedures do not incorporate estimates of the modulus of elasticity (MOE) of logs. It is questionable whether the visual grading procedures currently used for logs adequately assess the potential quality of structural products manufactured from them, especially...

Performance of sampling methods to estimate log characteristics for wildlife.

Science.gov (United States)

Lisa J. Bate; Torolf R. Torgersen; Michael J. Wisdom; Edward O. Garton

2004-01-01

Accurate estimation of the characteristics of log resources, or coarse woody debris (CWD), is critical to effective management of wildlife and other forest resources. Despite the importance of logs as wildlife habitat, methods for sampling logs have traditionally focused on silvicultural and fire applications. These applications have emphasized estimates of log volume...

Additional borehole geophysical logging at Waste Area Grouping 1 at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

1994-07-01

This technical memorandum describes the borehole geophysical logging performed at selected coreholes at Waste Area Grouping 1 between March and November 1991 in support of the remedial investigation. The primary objectives of the borehole geophysical logging program were to (1) identify fractured bedrock zones and identify those fractured bedrock zones participating in active groundwater flow, (2) correlate the fractured intervals with the regional stratigraphy described, and (3) further characterize local bedrock geology and hydrogeology and gain insight about the bedrock aquifer flow system. A secondary objective was to provide stratigraphic correlations with existing logs for coreholes CH001 through CH005. Fractured bedrock zones and active or open fractures were identified in all coreholes logged. The fracture identification and analysis process was intended to distinguish between open or active fractures participating in active groundwater flow and closed or inactive fractures that are partially or completely filled (such as with calcite mineralization) and do not support groundwater circulation. Most of the fractures identified are bedding plane. Fracture occurrence varies with the different units of the Chickamauga Group; the greatest density of fractures and active fractures occurs in the upper 150 ft of stratum cored. Fractures actively contributing to groundwater flow were also identified, and direction of fluid movement within fractures was identified for those coreholes with flowmeter data

Secure Audit Logging with Tamper-Resistant Hardware

NARCIS (Netherlands)

Chong, C.N.; Peng, Z.; Peng, Z.; Hartel, Pieter H.; Gritzalis, D.; De Capitani di Vimercati, S.; Katsikas, S.K.; Samarati, P.

Secure perimeter schemes (e.g. DRM) and tracing traitor schemes (e.g. watermarking, audit logging) strive to mitigate the problems of content escaping the control of the rights holder. Secure audit logging records the user's actions on content and enables detection of some forms of tampering with

Palm distributions for log Gaussian Cox processes

DEFF Research Database (Denmark)

Coeurjolly, Jean-Francois; Møller, Jesper; Waagepetersen, Rasmus

This paper reviews useful results related to Palm distributions of spatial point processes and provides a new result regarding the characterization of Palm distributions for the class of log Gaussian Cox processes. This result is used to study functional summary statistics for a log Gaussian Cox...

Geophysical logging of the Harwell boreholes

International Nuclear Information System (INIS)

Brightman, M.A.

1983-08-01

A comprehensive geophysical borehole logging survey was carried out on each of three deep boreholes drilled at the Harwell research site. KOALA and PETRA computer programs were used to analyse and interpret the logs to obtain continuous quantitative estimates of the geological and hydrogeological properties of the sequences penetrated at the Harwell site. Quantitative estimates of the mineral composition and porosity of the cores samples were made. (UK)

An artificial intelligence approach to well log correlation

International Nuclear Information System (INIS)

Startzman, R.A.; Kuo, T.B.

1986-01-01

This paper shows how an expert computer system was developed to correlate two well logs in at least moderately difficult situations. A four step process was devised to process log trace information and apply a set of rules to identify zonal correlations. Some of the advantages and problems with the artificial intelligence approach are shown using field logs. The approach is useful and, if properly and systematically applied, it can result in good correlations

Anomalous self potential (sp) log signatures observed in a water ...

African Journals Online (AJOL)

Geophysical logging was done after drilling had been completed in a water well at Okwudor, South Eastern Nigeria. Three electric logs were run viz: Self Potential (SP), Resistivity N16″ and N64″ logs. An anomaly was observed in the SP log. The SP results from this well show some deviation from the standard norm.

LongLine: Visual Analytics System for Large-scale Audit Logs

Directory of Open Access Journals (Sweden)

Seunghoon Yoo

2018-03-01

Full Text Available Audit logs are different from other software logs in that they record the most primitive events (i.e., system calls in modern operating systems. Audit logs contain a detailed trace of an operating system, and thus have received great attention from security experts and system administrators. However, the complexity and size of audit logs, which increase in real time, have hindered analysts from understanding and analyzing them. In this paper, we present a novel visual analytics system, LongLine, which enables interactive visual analyses of large-scale audit logs. LongLine lowers the interpretation barrier of audit logs by employing human-understandable representations (e.g., file paths and commands instead of abstract indicators of operating systems (e.g., file descriptors as well as revealing the temporal patterns of the logs in a multi-scale fashion with meaningful granularity of time in mind (e.g., hourly, daily, and weekly. LongLine also streamlines comparative analysis between interesting subsets of logs, which is essential in detecting anomalous behaviors of systems. In addition, LongLine allows analysts to monitor the system state in a streaming fashion, keeping the latency between log creation and visualization less than one minute. Finally, we evaluate our system through a case study and a scenario analysis with security experts.

Effect of current density on the anodization of zircaloy-2

International Nuclear Information System (INIS)

Bhaskar Reddy, P.; Panasa Reddy, A.

2005-01-01

The effect of current density on the kinetics of anodization of Zircaloy-2 in 0.1 M potassium tartarate have been studied at various constant current densities ranging from 2 to 10 mA.cm -2 and at room temperature to investigate the exponential dependence of ionic current density on the field across the oxide. The rate of anodic film formation (dV/dt), the current efficiency the differential field of formation (F) and the ionic current density (i i ) were calculated. It was found that all these parameters were increased with increase of current density. The induction period was decreased with the increase of current density. It was also found that the plot of log (ionic current density) vs differential field gave fairly a linear relationship. The kinetic parameters, half jump distance (a) and height of the energy barrier (W) were calculated. (author)

A semantic perspective on query log analysis

NARCIS (Netherlands)

Hofmann, K.; de Rijke, M.; Huurnink, B.; Meij, E.

2009-01-01

We present our views on the CLEF log file analysis task. We argue for a task definition that focuses on the semantic enrichment of query logs. In addition, we discuss how additional information about the context in which queries are being made could further our understanding of users’ information

Relationships between population density, fine-scale genetic structure, mating system and pollen dispersal in a timber tree from African rainforests.

Science.gov (United States)

Duminil, J; Daïnou, K; Kaviriri, D K; Gillet, P; Loo, J; Doucet, J-L; Hardy, O J

2016-03-01

Owing to the reduction of population density and/or the environmental changes it induces, selective logging could affect the demography, reproductive biology and evolutionary potential of forest trees. This is particularly relevant in tropical forests where natural population densities can be low and isolated trees may be subject to outcross pollen limitation and/or produce low-quality selfed seeds that exhibit inbreeding depression. Comparing reproductive biology processes and genetic diversity of populations at different densities can provide indirect evidence of the potential impacts of logging. Here, we analysed patterns of genetic diversity, mating system and gene flow in three Central African populations of the self-compatible legume timber species Erythrophleum suaveolens with contrasting densities (0.11, 0.68 and 1.72 adults per ha). The comparison of inbreeding levels among cohorts suggests that selfing is detrimental as inbred individuals are eliminated between seedling and adult stages. Levels of genetic diversity, selfing rates (∼16%) and patterns of spatial genetic structure (Sp ∼0.006) were similar in all three populations. However, the extent of gene dispersal differed markedly among populations: the average distance of pollen dispersal increased with decreasing density (from 200 m in the high-density population to 1000 m in the low-density one). Overall, our results suggest that the reproductive biology and genetic diversity of the species are not affected by current logging practices. However, further investigations need to be conducted in low-density populations to evaluate (1) whether pollen limitation may reduce seed production and (2) the regeneration potential of the species.

Relationships between population density, fine-scale genetic structure, mating system and pollen dispersal in a timber tree from African rainforests

Science.gov (United States)

Duminil, J; Daïnou, K; Kaviriri, D K; Gillet, P; Loo, J; Doucet, J-L; Hardy, O J

2016-01-01

Owing to the reduction of population density and/or the environmental changes it induces, selective logging could affect the demography, reproductive biology and evolutionary potential of forest trees. This is particularly relevant in tropical forests where natural population densities can be low and isolated trees may be subject to outcross pollen limitation and/or produce low-quality selfed seeds that exhibit inbreeding depression. Comparing reproductive biology processes and genetic diversity of populations at different densities can provide indirect evidence of the potential impacts of logging. Here, we analysed patterns of genetic diversity, mating system and gene flow in three Central African populations of the self-compatible legume timber species Erythrophleum suaveolens with contrasting densities (0.11, 0.68 and 1.72 adults per ha). The comparison of inbreeding levels among cohorts suggests that selfing is detrimental as inbred individuals are eliminated between seedling and adult stages. Levels of genetic diversity, selfing rates (∼16%) and patterns of spatial genetic structure (Sp ∼0.006) were similar in all three populations. However, the extent of gene dispersal differed markedly among populations: the average distance of pollen dispersal increased with decreasing density (from 200 m in the high-density population to 1000 m in the low-density one). Overall, our results suggest that the reproductive biology and genetic diversity of the species are not affected by current logging practices. However, further investigations need to be conducted in low-density populations to evaluate (1) whether pollen limitation may reduce seed production and (2) the regeneration potential of the species. PMID:26696137

Explorations in statistics: the log transformation.

Science.gov (United States)

Curran-Everett, Douglas

2018-06-01

Learning about statistics is a lot like learning about science: the learning is more meaningful if you can actively explore. This thirteenth installment of Explorations in Statistics explores the log transformation, an established technique that rescales the actual observations from an experiment so that the assumptions of some statistical analysis are better met. A general assumption in statistics is that the variability of some response Y is homogeneous across groups or across some predictor variable X. If the variability-the standard deviation-varies in rough proportion to the mean value of Y, a log transformation can equalize the standard deviations. Moreover, if the actual observations from an experiment conform to a skewed distribution, then a log transformation can make the theoretical distribution of the sample mean more consistent with a normal distribution. This is important: the results of a one-sample t test are meaningful only if the theoretical distribution of the sample mean is roughly normal. If we log-transform our observations, then we want to confirm the transformation was useful. We can do this if we use the Box-Cox method, if we bootstrap the sample mean and the statistic t itself, and if we assess the residual plots from the statistical model of the actual and transformed sample observations.

Use of improved hydrologic testing and borehole geophysical logging methods for aquifer characterization

International Nuclear Information System (INIS)

Newcomer, D.R.; Hall, S.H.; Vermeul, V.R.

1996-01-01

Depth-discrete aquifer information was obtained using recently developed adaptations and improvements to conventional characterization techniques. These improvements included running neutron porosity and bulk density geophysical logging tools through a cased hole, performing an enhanced point-dilution tracer test for monitoring tracer concentration as a function of time and depth, and using pressure derivatives for diagnostic and quantitative analysis of constant rate discharge test data. Data results from the use of these techniques were used to develop a conceptual model of a heterogeneous aquifer. Depth-discrete aquifer information was required to effectively design field-scale deployment and monitoring of an in situ bioremediation technology. The bioremediation study site is located on the US Department of Energy's Hanford site. The study is being conducted by the Pacific Northwest National Laboratory to demonstrate in situ bioremediation of carbon tetrachloride (CCl 4 ). Geophysical logging and point-dilution tracer test results provided the relative distribution of porosity and horizontal hydraulic conductivity, respectively, with depth and correlated well. Hydraulic pumping tests were conducted to estimate mean values for transmissivity and effective hydraulic conductivity. Tracer test and geophysical logging results indicated that ground water flow was predominant in the upper approximate 10 feet of the aquifer investigated. These results were used to delineate a more representative interval thickness for estimating effective hydraulic conductivity. Hydraulic conductivity, calculated using this representative interval, was estimated to be 73 ft/d, approximately three times higher than that calculated using the full length of the screened test interval

Why, What, and How to Log? Lessons from LISTEN

Science.gov (United States)

Mostow, Jack; Beck, Joseph E.

2009-01-01

The ability to log tutorial interactions in comprehensive, longitudinal, fine-grained detail offers great potential for educational data mining--but what data is logged, and how, can facilitate or impede the realization of that potential. We propose guidelines gleaned over 15 years of logging, exploring, and analyzing millions of events from…

Biological legacies buffer local species extinction after logging.

Science.gov (United States)

Rudolphi, Jörgen; Jönsson, Mari T; Gustafsson, Lena; Bugmann, H

2014-02-01

Clearcutting has been identified as a main threat to forest biodiversity. In the last few decades, alternatives to clearcutting have gained much interest. Living and dead trees are often retained after harvest to serve as structural legacies to mitigate negative effects of forestry. However, this practice is widely employed without information from systematic before-after control-impact studies to assess the processes involved in species responses after clearcutting with retention. We performed a large-scale survey of the occurrence of logging-sensitive and red-listed bryophytes and lichens before and after clearcutting with the retention approach. A methodology was adopted that, for the first time in studies on retention approaches, enabled monitoring of location-specific substrates. We used uncut stands as controls to assess the variables affecting the survival of species after a major disturbance. In total, 12 bryophyte species and 27 lichen species were analysed. All were classified as sensitive to logging, and most species are also currently red-listed. We found that living and dead trees retained after final harvest acted as refugia in which logging-sensitive species were able to survive for 3 to 7 years after logging. Depending on type of retention and organism group, between 35% and 92% of the species occurrences persisted on retained structures. Most species observed outside retention trees or patches disappeared. Larger pre-harvest population sizes of bryophytes on dead wood increased the survival probability of the species and hence buffered the negative effects of logging. Synthesis and applications . Careful spatial planning of retention structures is required to fully embrace the habitats of logging-sensitive species. Bryophytes and lichens persisted to a higher degree in retention patches compared to solitary trees or in the clearcut area. Retaining groups of trees in logged areas will help to sustain populations of species over the clearcut phase

Real Time Face Quality Assessment for Face Log Generation

DEFF Research Database (Denmark)

Kamal, Nasrollahi; Moeslund, Thomas B.

2009-01-01

Summarizing a long surveillance video to just a few best quality face images of each subject, a face-log, is of great importance in surveillance systems. Face quality assessment is the back-bone for face log generation and improving the quality assessment makes the face logs more reliable....... Developing a real time face quality assessment system using the most important facial features and employing it for face logs generation are the concerns of this paper. Extensive tests using four databases are carried out to validate the usability of the system....

Tradeoffs and interdependence in the Alaska cant and log markets.

Science.gov (United States)

Donald Flora; Una Woller; Michael. Neergaard

1990-01-01

During the 1980s, log exports from Alaska have risen while cant (lumber) exports have declined. Eight explanations for the difference between cant and log market behavior are explored. It seems that declining demand for wood products in Japan and a surge of private-sector log harvests in Alaska are enough to account for the apparent substitution of logs for cants. It...

Geophysical logging studies in the Snake River Plain Aquifer at the Idaho National Engineering Laboratory: Wells 44, 45, and 46

International Nuclear Information System (INIS)

Morin, R.H.; Paillet, F.L.; Taylor, T.A.; Barrash, W.

1993-01-01

A geophysical logging program was undertaken to vertically profile changes in the hydrology and hydrochemistry of the Snake River Plain aquifer underlies the Idaho National Engineering Laboratory (INEL). Field investigations were concentrated within an area west of the Idaho Chemical Processing Plant (ICPP) in three wells that penetrated the upper 190 feet of the aquifer. The logs obtained in these wells consisted of temperature, caliper, nuclear (neutron porosity and gamma-gama density), natural gamma, borehole televiewer, gamma spectral, and thermal flowmeter (with and without pumping). The nuclear, caliper, and televiewer logs are used to delineate individual basalt flows or flow units and to recognize breaks between flows or flow units at interflow contact zones and sedimentary interbeds. The temperature logs and flowmeter measurements obtained under ambient hydraulic head conditions identified upward fluid-circulation patterns in the three wells. Gamma-spectral analyses performed at several depths in each well showed that the predominant source of gamma radiation in the formation at this site originates mainly from potassium ( 40 K). However, 137 Cesium was detected at 32 feet below land surface in well 45. An empirical investigation of the effect of source-receiver spacing on the response of the neutron-porosity logging tool was attempted in an effort to understand the conditions under which this tool might be applied to large-diameter boreholes in-unsaturated formations

AML (Advanced Mud Logging: First Among Equals

Directory of Open Access Journals (Sweden)

T. Loermans

2017-09-01

Full Text Available During the past ten years an enormous development in mud logging technology has been made. Traditional mud logging was only qualitative in nature, and mudlogs could not be used for the petrophysical well evaluations which form the basis for all subsequent activities on wells and fields. AML however can provide quantitative information, logs with a reliability, trueness and precision like LWD and WLL. Hence for well evaluation programmes there are now three different logging methods available, each with its own pros and cons on specific aspects: AML, LWD and WLL. The largest improvements have been made in mud gas analysis and elemental analysis of cuttings. Mud gas analysis can yield hydrocarbon fluid composition for some components with a quality like PVT analysis, hence not only revolutionising the sampling programme so far done with only LWD/WLL, but also making it possible to geosteer on fluid properties. Elemental analysis of cuttings, e.g. with XRF, with an ability well beyond the capabilities of the spectroscopy measurements possible earlier with LWD/WLL tools, is opening up improved ways to evaluate formations, especially of course where the traditional methods are falling short of requirements, such as in unconventional reservoirs. An overview and specific examples of these AML logs is given, from which it may be concluded that AML now ought to be considered as “first among its equals”.

Rock mass characterization for Copenhagen Metro using face logs

DEFF Research Database (Denmark)

Hansen, Sanne Louise; Galsgaard, Jens; Foged, Niels Nielsen

2015-01-01

An extension of the existing Metro in central Copenhagen is currently under construction. We present a comparison of the different field logging techniques available from a large number of borehole logs and face logs carried out during the construction in cooperation with the constructor and client......, describing rock mass characteristics using detailed face logging with geological description and recording of induration and fracturing, giving a field RQD value during excavation, combined with televiewer logs, when available, has shown to be a valuable tool for rock mass characterization compared......’s representatives, which illustrate and approve the applied methods. The new ‘Cityringen’ Metro will consist of two 16 km single track tunnels, with 17 stations and 3 construction and ventilation shafts. The geological ground conditions are dominated by glacial and postglacial deposits overlying Paleocene Greensand...

Postfragmentation density function for bacterial aggregates in laminar flow.

Science.gov (United States)

Byrne, Erin; Dzul, Steve; Solomon, Michael; Younger, John; Bortz, David M

2011-04-01

The postfragmentation probability density of daughter flocs is one of the least well-understood aspects of modeling flocculation. We use three-dimensional positional data of Klebsiella pneumoniae bacterial flocs in suspension and the knowledge of hydrodynamic properties of a laminar flow field to construct a probability density function of floc volumes after a fragmentation event. We provide computational results which predict that the primary fragmentation mechanism for large flocs is erosion. The postfragmentation probability density function has a strong dependence on the size of the original floc and indicates that most fragmentation events result in clumps of one to three bacteria eroding from the original floc. We also provide numerical evidence that exhaustive fragmentation yields a limiting density inconsistent with the log-normal density predicted in the literature, most likely due to the heterogeneous nature of K. pneumoniae flocs. To support our conclusions, artificial flocs were generated and display similar postfragmentation density and exhaustive fragmentation. ©2011 American Physical Society

A comparison between elemental logs and core data

International Nuclear Information System (INIS)

Kerr, S.A.; Grau, J.A.; Schweitzer, J.S.

1992-01-01

Neutron-induced gamma-ray spectroscopy, of prompt capture and delayed activation, together with natural gamma-ray measurements, provides a borehole elemental analysis to characterize rock matrix composition. This study involved extensive core and log data in two wells. One well was drilled with a barite-weighted oil-based mud through a shallow marine sand. The other was drilled with fresh water-based mud through a channel sand, mudstone sequence overlying limestone. The results illustrate the importance of a suitable core sampling strategy and the problems associated with matching core to log data. Possible inaccuracies from the modelling of Ca-, Fe- and S-bearing minerals have been determined. A method for correcting the total measured aluminium concentration for that due to the borehole mud has been successfully tested against aluminium concentrations measured in the cleaned core samples. Estimates of the overall accuracy and precision of the elemental logging concentrations are obtained by comparing the log results with those obtained from the laboratory core analysis. A comprehensive core elemental analysis can also provide useful insight into the way other logs, such as the photoelectric factor or formation thermal neutron macroscopic absorption cross section, are influenced by minor and trace elements. Differences between calculated values from elemental logs and measured macroscopic parameters provide additional data for a more detailed understanding of the rock properties. (Author)

Analysis of log rate noise in Ontario's CANDU reactors

Energy Technology Data Exchange (ETDEWEB)

Hinds, H.W. [Dynamic Simulation and Analysis Corp., Deep River, Ontario (Canada); Banica, C.; Arguner, D. [Ontario Power Generation, Ajax, Ontario (Canada); Scharfenberg, R. [Bruce Power, Tiverton, Ontario (Canada)

2007-07-01

In the fall of 2003, the operators noticed that in the recently-refurbished Bruce A Shutdown System no. 1 (SDS1) the noise level in Log Rate signals were much larger than before. At the request of the Canadian Nuclear Safety Commission (CNSC), all Canadian CANDU reactors took action to characterize their Log Rate noise. Staff of the Inspection and Maintenance Services division of Ontario Power Generation (OPG) has collected high-speed high-accuracy noise data from nearly all 16 Ontario reactors, either as part of routine measurements before planned outages or as a dedicated noise recording. This paper gives the results of examining a suitable subset of this data, with respect to the characteristics and possible causes of Log Rate noise. The reactor and instrumentation design is different at each station: the locations of the moderator injection nozzles, the location of the ion chambers for each system, and the design of the Log Rate amplifiers. It was found that the Log noise (source of Log Rate noise) was much larger for those ion chambers in the path of the moderator injection nozzles, compared to those which were not in the path. This 'extra' Log noise would then be either attenuated or amplified depending on the transfer function (time constants) of the Log Rate amplifier. It was also observed that most of the Log and Log Rate noise is independent of any other signal measured. Although all CANDU reactors in Ontario have Log and Log Rate noise, the Bruce A SDS1 system has the largest amount of Log Rate noise, because (a) its SDS1 (and RRS) ion chambers are at the top of the reactor in the path of the moderator injection nozzles, and (b) its SDS1 Log Rate amplifiers have the smallest time constants. (author)

14 CFR 125.407 - Maintenance log: Airplanes.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Maintenance log: Airplanes. 125.407 Section... OPERATIONS: AIRPLANES HAVING A SEATING CAPACITY OF 20 OR MORE PASSENGERS OR A MAXIMUM PAYLOAD CAPACITY OF 6... Maintenance log: Airplanes. (a) Each person who takes corrective action or defers action concerning a reported...

Borehole logging system

International Nuclear Information System (INIS)

Allen, L.S.

1988-01-01

A radioactive borehole logging tool employs an epithermal neutron detector having a neutron counter surrounded by an inner thermal neutron filter and an outer thermal neutron filter. Located between the inner and outer filters is a neutron moderating material for extending the lifetime of epithermal neutrons to enhance the counting rate of such epithermal neutrons by the neutron counter

Closed expressions for $\\int_{0}^{1} t^{-1} log^{n-1}t log^{p}(1 - t) dt$

CERN Document Server

Kölbig, Kurt Siegfried

1982-01-01

Closed expressions for the integral integral /sub 0//sup 1/ t/sup -1/ log/sup n-1/t log/sup p/(1-t)dt, whose general form is given elsewhere, are listed for n=1(1)9, p=1(1)9. A formula is derived which allows an easy evaluation of these expressions by formula manipulation on a computer. The majority of the above expressions are given in a microfiche supplement to the paper.

Multivariate log-skew-elliptical distributions with applications to precipitation data

KAUST Repository

Marchenko, Yulia V.

2009-07-13

We introduce a family of multivariate log-skew-elliptical distributions, extending the list of multivariate distributions with positive support. We investigate their probabilistic properties such as stochastic representations, marginal and conditional distributions, and existence of moments, as well as inferential properties. We demonstrate, for example, that as for the log-t distribution, the positive moments of the log-skew-t distribution do not exist. Our emphasis is on two special cases, the log-skew-normal and log-skew-t distributions, which we use to analyze US national (univariate) and regional (multivariate) monthly precipitation data. © 2009 John Wiley & Sons, Ltd.

Multivariate log-skew-elliptical distributions with applications to precipitation data

KAUST Repository

Marchenko, Yulia V.; Genton, Marc G.

2009-01-01

We introduce a family of multivariate log-skew-elliptical distributions, extending the list of multivariate distributions with positive support. We investigate their probabilistic properties such as stochastic representations, marginal and conditional distributions, and existence of moments, as well as inferential properties. We demonstrate, for example, that as for the log-t distribution, the positive moments of the log-skew-t distribution do not exist. Our emphasis is on two special cases, the log-skew-normal and log-skew-t distributions, which we use to analyze US national (univariate) and regional (multivariate) monthly precipitation data. © 2009 John Wiley & Sons, Ltd.

Development of regional stump-to-mill logging cost estimators

Science.gov (United States)

Chris B. LeDoux; John E. Baumgras

1989-01-01

Planning logging operations requires estimating the logging costs for the sale or tract being harvested. Decisions need to be made on equipment selection and its application to terrain. In this paper a methodology is described that has been developed and implemented to solve the problem of accurately estimating logging costs by region. The methodology blends field time...

Teaching an Old Log New Tricks with Machine Learning.

Science.gov (United States)

Schnell, Krista; Puri, Colin; Mahler, Paul; Dukatz, Carl

2014-03-01

To most people, the log file would not be considered an exciting area in technology today. However, these relatively benign, slowly growing data sources can drive large business transformations when combined with modern-day analytics. Accenture Technology Labs has built a new framework that helps to expand existing vendor solutions to create new methods of gaining insights from these benevolent information springs. This framework provides a systematic and effective machine-learning mechanism to understand, analyze, and visualize heterogeneous log files. These techniques enable an automated approach to analyzing log content in real time, learning relevant behaviors, and creating actionable insights applicable in traditionally reactive situations. Using this approach, companies can now tap into a wealth of knowledge residing in log file data that is currently being collected but underutilized because of its overwhelming variety and volume. By using log files as an important data input into the larger enterprise data supply chain, businesses have the opportunity to enhance their current operational log management solution and generate entirely new business insights-no longer limited to the realm of reactive IT management, but extending from proactive product improvement to defense from attacks. As we will discuss, this solution has immediate relevance in the telecommunications and security industries. However, the most forward-looking companies can take it even further. How? By thinking beyond the log file and applying the same machine-learning framework to other log file use cases (including logistics, social media, and consumer behavior) and any other transactional data source.

Log ASCII Standard (LAS) Files for Geophysical Wireline Well Logs and Their Application to Geologic Cross Sections Through the Central Appalachian Basin

Science.gov (United States)

Crangle, Robert D.

2007-01-01

Introduction The U.S. Geological Survey (USGS) uses geophysical wireline well logs for a variety of purposes, including stratigraphic correlation (Hettinger, 2001, Ryder, 2002), petroleum reservoir analyses (Nelson and Bird, 2005), aquifer studies (Balch, 1988), and synthetic seismic profiles (Kulander and Ryder, 2005). Commonly, well logs are easier to visualize, manipulate, and interpret when available in a digital format. In recent geologic cross sections E-E' and D-D', constructed through the central Appalachian basin (Ryder, Swezey, and others, in press; Ryder, Crangle, and others, in press), gamma ray well log traces and lithologic logs were used to correlate key stratigraphic intervals (Fig. 1). The stratigraphy and structure of the cross sections are illustrated through the use of graphical software applications (e.g., Adobe Illustrator). The gamma ray traces were digitized in Neuralog (proprietary software) from paper well logs and converted to a Log ASCII Standard (LAS) format. Once converted, the LAS files were transformed to images through an LAS-reader application (e.g., GeoGraphix Prizm) and then overlain in positions adjacent to well locations, used for stratigraphic control, on each cross section. This report summarizes the procedures used to convert paper logs to a digital LAS format using a third-party software application, Neuralog. Included in this report are LAS files for sixteen wells used in geologic cross section E-E' (Table 1) and thirteen wells used in geologic cross section D-D' (Table 2).

Utilization and cost for animal logging operations

Science.gov (United States)

Suraj P. Shrestha; Bobby L. Lanford

2001-01-01

Forest harvesting with animals is a labor-intensive operation. Due to the development of efficient machines and high volume demands from the forest products industry, mechanization of logging developed very fast, leaving behind the traditional horse and mule logging. It is expensive to use machines on smaller woodlots, which require frequent moves if mechanically...

La logística y sus componentes

Directory of Open Access Journals (Sweden)

Deyanira Elizabeth Argumedo Sánchez

2014-05-01

Full Text Available Hoy en día el tema de la logística es un tema de suma importancia para las empresas ya que estas se han dado a la tarea de crear áreas especificas para su análisis se ha ido desarrollando a través del tiempo y en la actualidad se ha convertido en un aspecto de suma importancia para lograr que la empresa se posicione como del primer mundo. Antes se entendía como logística el tener el producto en el lugar indicado en el tiempo justo al menor costo posible pero ahora esas actividades han llegado a ser mejoradas que no solo se trata de eso ahora son todo un proceso. La logística determina y coordina en forma óptima el producto correcto, el cliente correcto, el tiempo y lugar correctos por lo tanto la logística no es una actividad funcional si no un modelo que permitirá reducir la incertidumbre de un futuro desconocido.

Morphological and quantitative changes in mitochondria, plastids, and peroxisomes during the log-to-stationary transition of the growth phase in cultured tobacco BY-2 cells.

Science.gov (United States)

Toyooka, Kiminori; Sato, Mayuko; Wakazaki, Mayumi; Matsuoka, Ken

2016-01-01

We developed a wide-range and high-resolution transmission electron microscope acquisition system and obtained giga-pixel images of tobacco BY-2 cells during the log and stationary phases of cell growth. We demonstrated that the distribution and ultrastructure of compartments involved in membrane traffic (i.e., Golgi apparatus, multivesicular body, and vesicle cluster) change during the log-to-stationary transition. Mitochondria, peroxisomes, and plastids were also enumerated. Electron densities of mitochondria and peroxisomes were altered during the growth-phase shift, while their numbers were reduced by nearly half. Plastid structure dramatically changed from atypical to spherical with starch granules. Nearly the same number of plastids was observed in both log and stationary phases. These results indicate that mechanisms regulating organelle populations differ from organelle to organelle.

Impacts of extended working hours in logging

Science.gov (United States)

Dana Mitchell; Tom Gallagher

2008-01-01

Last year at the 2007 AIM in Minneapolis, MN, the authors presented the human factors impacts to consider when implementing extended working hours in the logging industry. In a continuation of this project, we have researched existing literature to identify possible actions that logging business owners can take to reduce the impact of extended working hours on their...

Grading sugar pine saw logs in trees.

Science.gov (United States)

John W. Henley

1972-01-01

Small limbs and small overgrown limbs cause problems when grading saw logs in sugar pine trees. Surface characteristics and lumber recovery information for 426 logs from 64 sugar pine trees were examined. Resulting modifications in the grading specification that allow a grader to ignore small limbs and small limb indicators do not appear to decrease the performance of...

Analyzing Log Files using Data-Mining

Directory of Open Access Journals (Sweden)

Marius Mihut

2008-01-01

Full Text Available Information systems (i.e. servers, applications and communication devices create a large amount of monitoring data that are saved as log files. For analyzing them, a data-mining approach is helpful. This article presents the steps which are necessary for creating an ‘analyzing instrument’, based on an open source software called Waikato Environment for Knowledge Analysis (Weka [1]. For exemplification, a system log file created by a Windows-based operating system, is used as input file.

Log-Normal Turbulence Dissipation in Global Ocean Models

Science.gov (United States)

Pearson, Brodie; Fox-Kemper, Baylor

2018-03-01

Data from turbulent numerical simulations of the global ocean demonstrate that the dissipation of kinetic energy obeys a nearly log-normal distribution even at large horizontal scales O (10 km ) . As the horizontal scales of resolved turbulence are larger than the ocean is deep, the Kolmogorov-Yaglom theory for intermittency in 3D homogeneous, isotropic turbulence cannot apply; instead, the down-scale potential enstrophy cascade of quasigeostrophic turbulence should. Yet, energy dissipation obeys approximate log-normality—robustly across depths, seasons, regions, and subgrid schemes. The distribution parameters, skewness and kurtosis, show small systematic departures from log-normality with depth and subgrid friction schemes. Log-normality suggests that a few high-dissipation locations dominate the integrated energy and enstrophy budgets, which should be taken into account when making inferences from simplified models and inferring global energy budgets from sparse observations.

Log response of ultrasonic imaging and its significance for deep mineral prospecting of scientific drilling borehole-2 in Nanling district, China

International Nuclear Information System (INIS)

Xiao, Kun; Zou, Changchun; Xiang, Biao; Yue, Xuyuan; Zhou, Xinpeng; Li, Jianguo; Zhao, Bin

2014-01-01

The hole NLSD-2, one of the deepest scientific drilling projects in the metallic ore districts of China, is the second scientific drilling deep hole in the Nanling district. Its ultimate depth is 2012.12 m. This hole was created through the implementation of continuous coring, and the measuring of a variety of geophysical well logging methods was performed over the course of the drilling process. This paper analyzes the characteristic responses of the fracture and fractured zone by ultrasonic imaging log data, and characterizes various rules of fracture parameters which change according to drilling depth. It then discusses the denotative meaning of the log results of polymetallic mineralization layers. The formation fractures develop most readily in a depth of 100∼200 m, 600∼850 m and 1450∼1550 m of the hole NLSD-2, and high angle fractures develop most prominently. The strike direction of the fractures is mainly NW-SE, reflecting the orientation of maximum horizontal principal stress. For the polymetallic mineralization layer that occurred in the fractured zone, the characteristic response of ultrasonic imaging log is a wide dark zone, and the characteristic responses of conventional logs displayed high polarizability, high density, high acoustic velocity and low resistivity. All the main polymetallic mineralization layers are developed in fractures or fractured zones, and the fractures and fractured zones can be identified by an ultrasonic imaging log, thus the log results indirectly indicate the occurrence of polymetallic mineralization layers. Additionally, the relationship between the dip direction of fractures and the well deviation provides guidance for straightening of the drilling hole. (paper)

Recovery of a lowland dipterocarp forest twenty two years after selective logging at Sekundur, Gunung Leuser National Park, North Sumatra, Indonesia

Directory of Open Access Journals (Sweden)

Dolly - Priatna

2006-12-01

Full Text Available PRIATNA, D.; KARTAWINATA, K.; ABDULHADI, R. 2004. Recovery of a lowland dipterocarp forest twenty two years after selective logging at Sekundur, Gunung Leuser National Park, North Sumatra, Indonesia. Reinwardtia 12 (3: 237–255. — A permanent 2-ha plot of lowland forest selectively logged in 1978 at Sekundur, Gunung Leuser National Park, which is also a Biosphere Reserve and a World Heritage Site, North Sumatra, was established and investigated in 1982. It was re-examined in 2000, where remeasurement and reidentification of all trees with DBH 10 cm were made. The areas of gap, building and mature phases of the canopy were also measured and mapped. Within this plot, 133 species, 87 genera and 39 families were recorded, with the total number of trees of 1145 or density of 572.5/ha. Euphorbiaceae was the richest family with 18 species (13.5 % of the total and total number of trees of 248 (21.7 % of the total or density of 124 trees/ha. The most important families were Dipterocarpaceae with IV (Importance Value = 52.0, followed by Euphorbiaceae with IV = 51.8. The most prevalent species was Shorea kunstleri (Dipterocarpaceae with IV =24.4, followed by Macaranga diepenhorstii (Euphorbiaceae with IV = 12.4. They were the species with highest density, 34 trees/ha and 23.5 trees/ha, respectively. During the period of 18 years there has been no shift in the richest families, most important families and most important species. Euphorbiaceae was the richest family and Dipterocarpaceae was the most important family, with Shorea kunstleri as the most important species with highest importance value throughout the period. The number of species increased from 127 to 133 with increase in density by 36.8% , from 418.5 trees/ha to 572.5 trees/ha. The mortality was 25.57 % or 1.4 % per year. The diameter class distribution indicated that the forest recovery has not been complete. Trees were small, comprising 67.6 % with diameters of 10-20 cm and only two trees

Two-stage recovery of amphibian assemblages following selective logging of tropical forests.

Science.gov (United States)

Adum, Gilbert Baase; Eichhorn, Markus Peter; Oduro, William; Ofori-Boateng, Caleb; Rödel, Mark-Oliver

2013-04-01

There is a lack of quantitative information on the effectiveness of selective-logging practices in ameliorating effects of logging on faunal communities. We conducted a large-scale replicated field study in 3 selectively logged moist semideciduous forests in West Africa at varying times after timber extraction to assess post logging effects on amphibian assemblages. Specifically, we assessed whether the diversity, abundance, and assemblage composition of amphibians changed over time for forest-dependent species and those tolerant of forest disturbance. In 2009, we sampled amphibians in 3 forests (total of 48 study plots, each 2 ha) in southwestern Ghana. In each forest, we established plots in undisturbed forest, recently logged forest, and forest logged 10 and 20 years previously. Logging intensity was constant across sites with 3 trees/ha removed. Recently logged forests supported substantially more species than unlogged forests. This was due to an influx of disturbance-tolerant species after logging. Simultaneously Simpson's index decreased, with increased in dominance of a few species. As time since logging increased richness of disturbance-tolerant species decreased until 10 years after logging when their composition was indistinguishable from unlogged forests. Simpson's index increased with time since logging and was indistinguishable from unlogged forest 20 years after logging. Forest specialists decreased after logging and recovered slowly. However, after 20 years amphibian assemblages had returned to a state indistinguishable from that of undisturbed forest in both abundance and composition. These results demonstrate that even with low-intensity logging (≤3 trees/ha) a minimum 20-year rotation of logging is required for effective conservation of amphibian assemblages in moist semideciduous forests. Furthermore, remnant patches of intact forests retained in the landscape and the presence of permanent brooks may aid in the effective recovery of amphibian

Direct potable reuse microbial risk assessment methodology: Sensitivity analysis and application to State log credit allocations.

Science.gov (United States)

Soller, Jeffrey A; Eftim, Sorina E; Nappier, Sharon P

2018-01-01

Understanding pathogen risks is a critically important consideration in the design of water treatment, particularly for potable reuse projects. As an extension to our published microbial risk assessment methodology to estimate infection risks associated with Direct Potable Reuse (DPR) treatment train unit process combinations, herein, we (1) provide an updated compilation of pathogen density data in raw wastewater and dose-response models; (2) conduct a series of sensitivity analyses to consider potential risk implications using updated data; (3) evaluate the risks associated with log credit allocations in the United States; and (4) identify reference pathogen reductions needed to consistently meet currently applied benchmark risk levels. Sensitivity analyses illustrated changes in cumulative annual risks estimates, the significance of which depends on the pathogen group driving the risk for a given treatment train. For example, updates to norovirus (NoV) raw wastewater values and use of a NoV dose-response approach, capturing the full range of uncertainty, increased risks associated with one of the treatment trains evaluated, but not the other. Additionally, compared to traditional log-credit allocation approaches, our results indicate that the risk methodology provides more nuanced information about how consistently public health benchmarks are achieved. Our results indicate that viruses need to be reduced by 14 logs or more to consistently achieve currently applied benchmark levels of protection associated with DPR. The refined methodology, updated model inputs, and log credit allocation comparisons will be useful to regulators considering DPR projects and design engineers as they consider which unit treatment processes should be employed for particular projects. Published by Elsevier Ltd.

The current situation and prospect of fundamental research about nuclear logging technology

International Nuclear Information System (INIS)

Zhang Feng; Wang Xinguang; Yuan Chao

2010-01-01

Nuclear logging technology is one of the important methods to evaluate complex hydrocarbon reservoir in the process of petroleum exploration and development. The fundamental research of nuclear logging is an important step of logging technology innovation. Through analyzing the current situation of the development of nuclear logging technology at home and abroad in recent years, the problems and gaps are pointed out in the field of fundamental research of nuclear logging at home, and the future development of new nuclear logging technologies is concisely analyzed. Therefore, the optimal design and processing are conducted from aspects of ray source, detector, data acquisition and processing method. In addition, the fundamental research of LWD and pulsed neutron logging technology is taken as the main breach. In the fundamental research of nuclear logging technology, innovative thinking should be expressed and the innovation should be achieved in every field of the development of nuclear logging technology. Meanwhile, the logging key lab should be taken as the platform and the latest achievement in the field of nuclear logging technology should be fully utilized. Thus, the level of independent R and D and technology innovation of logging tools will be raised and service for the exploration and development of petroleum and other mineral resources. (authors)

Perfil logístico de Colombia

OpenAIRE

Cardozo Maglioni, María Victoria; Lozano Suarez, María Goretty

2012-01-01

El presente documento ofrece un estudio del perfil logístico de Colombia con la finalidad de dar a conocer el estado de arte de las ciudades, puertos e infraestructura principal para facilitar la toma de decisiones de los empresarios. Para el desarrollo de este trabajo se determinaron a partir de un análisis competitivo del país; las principales ciudades y puertos; logrando establecer un inventario de maquinaria y equipo e infraestructura logística; enmarcados en retos ya establecidos en las ...

Borehole logging for uranium exploration

International Nuclear Information System (INIS)

1982-01-01

The present text has been prepared taking into account the requirements of both developing countries, which might be at an incipient stage of uranium exploration, and industrialized countries, where more advanced exploration and resource evaluation techniques are commonly in use. While it was felt necessary to include some discussion of exploration concepts and fundamental physical principles underlying various logging methods, it was not the intention of the consultants to provide a thorough, detailed explanation of the various techniques, or even to give a comprehensive listing thereof. However, a list of references has been included, and it is strongly recommended that the serious student of mineral logging consult this list for further guidance

Logging technique for assaying for uranium in rocks

International Nuclear Information System (INIS)

Givens, W.W.

1973-01-01

A uranium exploration technique is described for determining the uranium content of a formation traversed by borehole. A delayed fission neutron assay log is obtained by irradiating the formation with repetitive bursts of fast neutrons and detecting delayed neutrons resulting from neutron fission of uranium at time intervals between the fast neutron bursts and after dissipation of the neutrons originating in the bursts. In addition, a response log is obtained by irradiating the formation with a source of fast neutrons whereby the neutrons from this source are moderated in the formation to lower energy levels and are subject to absorption. Secondary radiation attendant to these lower energy neutrons is recorded in order to obtain a log representative of the response of the formation to moderation and absorption of the neutrons. The two logs thus obtained are correlated in order to determine a corrected value of uranium content of the formation. (author)

Selective logging: do rates of forest turnover in stems, species composition and functional traits decrease with time since disturbance? - A 45 year perspective.

Science.gov (United States)

Osazuwa-Peters, Oyomoare L; Jiménez, Iván; Oberle, Brad; Chapman, Colin A; Zanne, Amy E

2015-12-01

Selective logging, the targeted harvesting of timber trees in a single cutting cycle, is globally rising in extent and intensity. Short-term impacts of selective logging on tropical forests have been widely investigated, but long-term effects on temporal dynamics of forest structure and composition are largely unknown. Understanding these long-term dynamics will help determine whether tropical forests are resilient to selective logging and inform choices between competing demands of anthropogenic use versus conservation of tropical forests. Forest dynamics can be studied within the framework of succession theory, which predicts that temporal turnover rates should decline with time since disturbance. Here, we investigated the temporal dynamics of a tropical forest in Kibale National Park, Uganda over 45 years following selective logging. We estimated turnover rates in stems, species composition, and functional traits (wood density and diameter at breast height), using observations from four censuses in 1989, 1999, 2006, and 2013, of stems ≥ 10 cm diameter within 17 unlogged and 9 logged 200 × 10 m vegetation plots. We used null models to account for interdependencies among turnover rates in stems, species composition, and functional traits. We tested predictions that turnover rates should be higher and decrease with increasing time since the selective logging event in logged forest, but should be less temporally variable in unlogged forest. Overall, we found higher turnover rates in logged forest for all three attributes, but turnover rates did not decline through time in logged forest and was not less temporally variable in unlogged forest. These results indicate that successional models that assume recovery to pre-disturbance conditions are inadequate for predicting the effects of selective logging on the dynamics of the tropical forest in Kibale. Selective logging resulted in persistently higher turnover rates, which may compromise the carbon storage capacity

Agreement of mammographic measures of volumetric breast density to MRI.

Directory of Open Access Journals (Sweden)

Jeff Wang

Full Text Available Clinical scores of mammographic breast density are highly subjective. Automated technologies for mammography exist to quantify breast density objectively, but the technique that most accurately measures the quantity of breast fibroglandular tissue is not known.To compare the agreement of three automated mammographic techniques for measuring volumetric breast density with a quantitative volumetric MRI-based technique in a screening population.Women were selected from the UCSF Medical Center screening population that had received both a screening MRI and digital mammogram within one year of each other, had Breast Imaging Reporting and Data System (BI-RADS assessments of normal or benign finding, and no history of breast cancer or surgery. Agreement was assessed of three mammographic techniques (Single-energy X-ray Absorptiometry [SXA], Quantra, and Volpara with MRI for percent fibroglandular tissue volume, absolute fibroglandular tissue volume, and total breast volume.Among 99 women, the automated mammographic density techniques were correlated with MRI measures with R(2 values ranging from 0.40 (log fibroglandular volume to 0.91 (total breast volume. Substantial agreement measured by kappa statistic was found between all percent fibroglandular tissue measures (0.72 to 0.63, but only moderate agreement for log fibroglandular volumes. The kappa statistics for all percent density measures were highest in the comparisons of the SXA and MRI results. The largest error source between MRI and the mammography techniques was found to be differences in measures of total breast volume.Automated volumetric fibroglandular tissue measures from screening digital mammograms were in substantial agreement with MRI and if associated with breast cancer could be used in clinical practice to enhance risk assessment and prevention.

Agreement of mammographic measures of volumetric breast density to MRI.

Science.gov (United States)

Wang, Jeff; Azziz, Ania; Fan, Bo; Malkov, Serghei; Klifa, Catherine; Newitt, David; Yitta, Silaja; Hylton, Nola; Kerlikowske, Karla; Shepherd, John A

2013-01-01

Clinical scores of mammographic breast density are highly subjective. Automated technologies for mammography exist to quantify breast density objectively, but the technique that most accurately measures the quantity of breast fibroglandular tissue is not known. To compare the agreement of three automated mammographic techniques for measuring volumetric breast density with a quantitative volumetric MRI-based technique in a screening population. Women were selected from the UCSF Medical Center screening population that had received both a screening MRI and digital mammogram within one year of each other, had Breast Imaging Reporting and Data System (BI-RADS) assessments of normal or benign finding, and no history of breast cancer or surgery. Agreement was assessed of three mammographic techniques (Single-energy X-ray Absorptiometry [SXA], Quantra, and Volpara) with MRI for percent fibroglandular tissue volume, absolute fibroglandular tissue volume, and total breast volume. Among 99 women, the automated mammographic density techniques were correlated with MRI measures with R(2) values ranging from 0.40 (log fibroglandular volume) to 0.91 (total breast volume). Substantial agreement measured by kappa statistic was found between all percent fibroglandular tissue measures (0.72 to 0.63), but only moderate agreement for log fibroglandular volumes. The kappa statistics for all percent density measures were highest in the comparisons of the SXA and MRI results. The largest error source between MRI and the mammography techniques was found to be differences in measures of total breast volume. Automated volumetric fibroglandular tissue measures from screening digital mammograms were in substantial agreement with MRI and if associated with breast cancer could be used in clinical practice to enhance risk assessment and prevention.

Modelling tropical forests response to logging

Science.gov (United States)

Cazzolla Gatti, Roberto; Di Paola, Arianna; Valentini, Riccardo; Paparella, Francesco

2013-04-01

Tropical rainforests are among the most threatened ecosystems by large-scale fragmentation due to human activity such as heavy logging and agricultural clearance. Although, they provide crucial ecosystem goods and services, such as sequestering carbon from the atmosphere, protecting watersheds and conserving biodiversity. In several countries forest resource extraction has experienced a shift from clearcutting to selective logging to maintain a significant forest cover and understock of living biomass. However the knowledge on the short and long-term effects of removing selected species in tropical rainforest are scarce and need to be further investigated. One of the main effects of selective logging on forest dynamics seems to be the local disturbance which involve the invasion of open space by weed, vines and climbers at the expense of the late-successional state cenosis. We present a simple deterministic model that describes the dynamics of tropical rainforest subject to selective logging to understand how and why weeds displace native species. We argue that the selective removal of tallest tropical trees carries out gaps of light that allow weeds, vines and climbers to prevail on native species, inhibiting the possibility of recovery of the original vegetation. Our results show that different regime shifts may occur depending on the type of forest management adopted. This hypothesis is supported by a dataset of trees height and weed/vines cover that we collected from 9 plots located in Central and West Africa both in untouched and managed areas.

Aespoe Hard Rock Laboratory. BIPS logging in borehole KAS09

Energy Technology Data Exchange (ETDEWEB)

Gustafsson, Jaana; Gustafsson, Christer (Malaa Geoscience AB (Sweden))

2010-01-15

This report includes the data gained in BIPS logging performed at the Aespoe Hard Rock Laboratory. The logging operation presented here includes BIPS logging in the core drilled borehole KAS09. The objective for the BIPS logging was to observe the condition of KAS09 in order to restore the borehole in the hydrogeological monitoring programme.All measurements were conducted by Malaa Geoscience AB on October 9th 2009. The objective of the BIPS logging is to achieve information of the borehole including occurrence of rock types as well as determination of fracture distribution and orientation. This report describes the equipment used as well as the measurement procedures and data gained. For the BIPS survey, the result is presented as images. The basic conditions of the BIPS logging for geological mapping and orientation of structures are satisfying for borehole KAS09, although induced affects from the drilling on the borehole walls limit the visibility

Aespoe Hard Rock Laboratory. BIPS logging in borehole KAS09

International Nuclear Information System (INIS)

Gustafsson, Jaana; Gustafsson, Christer

2010-01-01

This report includes the data gained in BIPS logging performed at the Aespoe Hard Rock Laboratory. The logging operation presented here includes BIPS logging in the core drilled borehole KAS09. The objective for the BIPS logging was to observe the condition of KAS09 in order to restore the borehole in the hydrogeological monitoring programme.All measurements were conducted by Malaa Geoscience AB on October 9th 2009. The objective of the BIPS logging is to achieve information of the borehole including occurrence of rock types as well as determination of fracture distribution and orientation. This report describes the equipment used as well as the measurement procedures and data gained. For the BIPS survey, the result is presented as images. The basic conditions of the BIPS logging for geological mapping and orientation of structures are satisfying for borehole KAS09, although induced affects from the drilling on the borehole walls limit the visibility

The log-linear return approximation, bubbles, and predictability

DEFF Research Database (Denmark)

Engsted, Tom; Pedersen, Thomas Quistgaard; Tanggaard, Carsten

We study in detail the log-linear return approximation introduced by Campbell and Shiller (1988a). First, we derive an upper bound for the mean approximation error, given stationarity of the log dividendprice ratio. Next, we simulate various rational bubbles which have explosive conditional expec...

Responses of cavity-nesting birds to stand-replacement fire and salvage logging in ponderosa pine/Douglas-fir forests of southwestern Idaho

Science.gov (United States)

Victoria A. Saab; Jonathan G. Dudley

1998-01-01

From 1994 to 1996, researchers monitored 695 nests of nine cavity-nesting bird species and measured vegetation at nest sites and at 90 randomly located sites in burned ponderosa pine forests of southwestern Idaho. Site treatments included two types of salvage logging, and unlogged controls. All bird species selected nest sites with higher tree densities, larger...

Geothermal well log interpretation midterm report

Energy Technology Data Exchange (ETDEWEB)

Sanyal, S.K.; Wells, L.E.; Bickham, R.E.

1979-02-01

Reservoir types are defined according to fluid phase and temperature, lithology, geologic province, pore geometry, and salinity and fluid chemistry. Improvements are needed in lithology and porosity definition, fracture detection, and thermal evaluation for more accurate interpretation. Further efforts are directed toward improving diagnostic techniques for relating rock characteristics and log response, developing petrophysical models for geothermal systems, and developing thermal evaluation techniques. The Geothermal Well Log Interpretation study and report has concentrated only on hydrothermal geothermal reservoirs. Other geothermal reservoirs (hot dry rock, geopressured, etc.) are not considered.

Predicting the Rate of River Bank Erosion Caused by Large Wood Log

Science.gov (United States)

Zhang, N.; Rutherfurd, I.; Ghisalberti, M.

2016-12-01

When a single tree falls into a river channel, flow is deflected and accelerated between the tree roots and the bank face, increasing shear stress and scouring the bank. The scallop shaped erosion increases the diversity of the channel morphology, but also causes concern for adjacent landholders. Concern about increased bank erosion is one of the main reasons for large wood to still be removed from channels in SE Australia. Further, the hydraulic effect of many logs in the channel can reduce overall bank erosion rates. Although both phenomena have been described before, this research develops a hydraulic model that estimates their magnitude, and tests and calibrates this model with flume and field measurements, with logs with various configurations and sizes. Specifically, the model estimates the change in excess shear stress on the bank associated . The model addresses the effect of the log angle, distance from bank, and log size and flow condition by solving the mass continuity and energy conservation between the cross section at the approaching flow and contracted flow. Then, we evaluate our model against flume experiment preformed with semi-realistic log models to represent logs in different sizes and decay stages by comparing the measured and simulated velocity increase in the gap between the log and the bank. The log angle, distance from bank, and flow condition are systemically varied for each log model during the experiment. Final, the calibrated model is compared with the field data collected in anabranching channels of Murray River in SE Australia where there are abundant instream logs and regulated and consistent high flow for irrigation. Preliminary results suggest that a log can significantly increase the shear stress on the bank, especially when it positions perpendicular to the flow. The shear stress increases with the log angle in a rising curve (The log angle is the angle between log trunk and flow direction. 0o means log is parallel to flow with

Assessment of geophysical logs from borehole USW G-2, Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Nelson, P.H.; Schimschal, U.

1993-01-01

Commercial logging contractors, Western Atlas, Schlumberger, and Edcon obtained borehole geophysical logs at the site of a potential high level nuclear waste repository at Yucca Mountain, Nevada. Drill hole USW-G2 was picked for this test of suitable logging tools and logging technology, both representing state-of-the-art technology by these commercial companies. Experience gained by analysis of existing core data and a variety of logs obtained earlier by Birdwell and Dresser Atlas served as a guide to a choice of logs to be obtained. Logs were obtained in water-filled borehole in zeolitized tuff (saturated zone) and in air-filled borehole largely in unaltered welded tuff (unsaturated zone)

TENSOR DECOMPOSITIONS AND SPARSE LOG-LINEAR MODELS

Science.gov (United States)

Johndrow, James E.; Bhattacharya, Anirban; Dunson, David B.

2017-01-01

Contingency table analysis routinely relies on log-linear models, with latent structure analysis providing a common alternative. Latent structure models lead to a reduced rank tensor factorization of the probability mass function for multivariate categorical data, while log-linear models achieve dimensionality reduction through sparsity. Little is known about the relationship between these notions of dimensionality reduction in the two paradigms. We derive several results relating the support of a log-linear model to nonnegative ranks of the associated probability tensor. Motivated by these findings, we propose a new collapsed Tucker class of tensor decompositions, which bridge existing PARAFAC and Tucker decompositions, providing a more flexible framework for parsimoniously characterizing multivariate categorical data. Taking a Bayesian approach to inference, we illustrate empirical advantages of the new decompositions. PMID:29332971

Requirements-Driven Log Analysis Extended Abstract

Science.gov (United States)

Havelund, Klaus

2012-01-01

Imagine that you are tasked to help a project improve their testing effort. In a realistic scenario it will quickly become clear, that having an impact is diffcult. First of all, it will likely be a challenge to suggest an alternative approach which is significantly more automated and/or more effective than current practice. The reality is that an average software system has a complex input/output behavior. An automated testing approach will have to auto-generate test cases, each being a pair (i; o) consisting of a test input i and an oracle o. The test input i has to be somewhat meaningful, and the oracle o can be very complicated to compute. Second, even in case where some testing technology has been developed that might improve current practice, it is then likely difficult to completely change the current behavior of the testing team unless the technique is obviously superior and does everything already done by existing technology. So is there an easier way to incorporate formal methods-based approaches than the full edged test revolution? Fortunately the answer is affirmative. A relatively simple approach is to benefit from possibly already existing logging infrastructure, which after all is part of most systems put in production. A log is a sequence of events, generated by special log recording statements, most often manually inserted in the code by the programmers. An event can be considered as a data record: a mapping from field names to values. We can analyze such a log using formal methods, for example checking it against a formal specification. This separates running the system for analyzing its behavior. It is not meant as an alternative to testing since it does not address the important in- put generation problem. However, it offers a solution which testing teams might accept since it has low impact on the existing process. A single person might be assigned to perform such log analysis, compared to the entire testing team changing behavior.

The Log-Linear Return Approximation, Bubbles, and Predictability

DEFF Research Database (Denmark)

Engsted, Tom; Pedersen, Thomas Quistgaard; Tanggaard, Carsten

2012-01-01

We study in detail the log-linear return approximation introduced by Campbell and Shiller (1988a). First, we derive an upper bound for the mean approximation error, given stationarity of the log dividend-price ratio. Next, we simulate various rational bubbles which have explosive conditional expe...

Cell density dependence of transformation frequencies in C3H10T1/2 cells exposed to X-rays

Energy Technology Data Exchange (ETDEWEB)

Bettega, D; Calzolari, P; Ottolenghi, A; Lombardi, L T [Milan Univ. (Italy). Ist. di Fisica; Rimoldi, E [Milan Univ. (Italy). Ist. di Radiologia Veterinaria

1989-12-01

The effects of cell density on transformation frequencies were studied in C3H10T1/2 cells exposed to 0.5 and 7 Gy of 200 kVp X-rays. Initial cell density strongly influenced transformation frequency; this decreased by a factor of between 4 and 10 when the initial seeding density was changed from 50 to 2500 cells/10 cm diameter Petri dish. The data were fitted with two equations: (a) an allometric function represented on a log-log scale by a straight line and (b) a sigmoidal function with plateaux between 50 and 250 cells/dish and above 600. The two curves are compared and their probabilities discussed. Our data indicate that the region between 50 and 250 cells/dish would be the most suitable region for dose-effect measurements. A study of the growth curves at 0.5 and 8.5 Gy shows that cell growth rates are not influenced by initial cell density. (author).

Dose estimative in operators during petroleum wells logging with nuclear wireless probes through computer modelling; Estimativa da dose em operadores durante procedimentos de perfilagem de pocos de petroleo com sondas wireless nucleares atraves de modelagem computacional

Energy Technology Data Exchange (ETDEWEB)

Souza, Edmilson Monteiro de; Silva, Ademir Xavier da; Lopes, Ricardo T., E-mail: emonteiro@nuclear.ufrj.b, E-mail: ademir@nuclear.ufrj.b, E-mail: ricardo@lin.ufrj.b [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear; Lima, Inaya C.B., E-mail: inaya@lin.ufrj.b [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear; Instituto Politecnico do Rio de Janeiro (IPRJ/UERJ), Nova Friburgo, RJ (Brazil); Correa, Samanda Cristine Arruda, E-mail: scorrea@cnen.gov.b [Comissao Nacional de Energia Nuclear (DIAPI/CGMI/CNEN), Rio de Janeiro, RJ (Brazil); Rocha, Paula L.F., E-mail: ferrucio@acd.ufrj.b [Universidade Federal do Rio de Janeiro (UFRJ)., RJ (Brazil). Dept. de Geologia

2011-10-26

This paper evaluates the absorbed dose and the effective dose on operators during the petroleum well logging with nuclear wireless that uses gamma radiation sources. To obtain the data, a typical scenery of a logging procedure will be simulated with MCNPX Monte Carlo code. The simulated logging probe was the Density Gamma Probe - TRISOND produced by Robertson Geolloging. The absorbed dose values were estimated through the anthropomorphic simulator in male voxel MAX. The effective dose values were obtained using the ICRP 103

Logging a roadside stand to protect scenic values

Science.gov (United States)

Philip M. McDonald; Raymond V. Whiteley

1972-01-01

A case study on the Challenge Experimental Forest, California, demonstrated that logging along roadsides need not despoil roadside stands. Nearly every tree was "viewed" before marking. Because of the "special-care" procedures followed, combined logging and slash-disposal cost was about twice that of a single-tree selection cut.

SedMob: A mobile application for creating sedimentary logs in the field

Science.gov (United States)

Wolniewicz, Pawel

2014-05-01

SedMob is an open-source, mobile software package for creating sedimentary logs, targeted for use in tablets and smartphones. The user can create an unlimited number of logs, save data from each bed in the log as well as export and synchronize the data with a remote server. SedMob is designed as a mobile interface to SedLog: a free multiplatform package for drawing graphic logs that runs on PC computers. Data entered into SedMob are saved in the CSV file format, fully compatible with SedLog.

Gerencia logística y global

Directory of Open Access Journals (Sweden)

Pablo Cesar Ocampo Vélez

2009-04-01

Full Text Available La logística es una filosofía que se encarga de aplicar las buenas pá¡cticas en los macroprocesos, procesos, procedimientos, tareas y productos dentro de una organización, con el fin de satisfacer las necesidades del cliente, quien es la razón de ser de la empresa. Existen entes internacionales que velan porque las compañias en todo el mundo utilicen y difundan las diferentes disciplinas logísticas en toda la red de valor y tengan un mismo enfoque estratégico.El objetivo de este artículo es explicar la existencia de procesos y macroprocesos de clase mundial en la logística, gracias a los cuales hay una gran oportunidad de mejora para los empresarios colombianos, con el fin de reestructurar los procesos estratégicos, tácticos y operacionales de cada Unidad de Negocio, para que sean organizaciones más competitivas, que puedan enfrentar los tratados de libre comercio, brindando mayor sostenibilidad y óptimo nivel de servicio.

Reduced density gradient as a novel approach for estimating QSAR descriptors, and its application to 1, 4-dihydropyridine derivatives with potential antihypertensive effects.

Science.gov (United States)

Jardínez, Christiaan; Vela, Alberto; Cruz-Borbolla, Julián; Alvarez-Mendez, Rodrigo J; Alvarado-Rodríguez, José G

2016-12-01

The relationship between the chemical structure and biological activity (log IC 50 ) of 40 derivatives of 1,4-dihydropyridines (DHPs) was studied using density functional theory (DFT) and multiple linear regression analysis methods. With the aim of improving the quantitative structure-activity relationship (QSAR) model, the reduced density gradient s( r) of the optimized equilibrium geometries was used as a descriptor to include weak non-covalent interactions. The QSAR model highlights the correlation between the log IC 50 with highest molecular orbital energy (E HOMO ), molecular volume (V), partition coefficient (log P), non-covalent interactions NCI(H4-G) and the dual descriptor [Δf(r)]. The model yielded values of R 2 =79.57 and Q 2 =69.67 that were validated with the next four internal analytical validations DK=0.076, DQ=-0.006, R P =0.056, and R N =0.000, and the external validation Q 2 boot =64.26. The QSAR model found can be used to estimate biological activity with high reliability in new compounds based on a DHP series. Graphical abstract The good correlation between the log IC 50 with the NCI (H4-G) estimated by the reduced density gradient approach of the DHP derivatives.

On the generation of log-Levy distributions and extreme randomness

International Nuclear Information System (INIS)

Eliazar, Iddo; Klafter, Joseph

2011-01-01

The log-normal distribution is prevalent across the sciences, as it emerges from the combination of multiplicative processes and the central limit theorem (CLT). The CLT, beyond yielding the normal distribution, also yields the class of Levy distributions. The log-Levy distributions are the Levy counterparts of the log-normal distribution, they appear in the context of ultraslow diffusion processes, and they are categorized by Mandelbrot as belonging to the class of extreme randomness. In this paper, we present a natural stochastic growth model from which both the log-normal distribution and the log-Levy distributions emerge universally-the former in the case of deterministic underlying setting, and the latter in the case of stochastic underlying setting. In particular, we establish a stochastic growth model which universally generates Mandelbrot's extreme randomness. (paper)

Log of Apollo 11.

Science.gov (United States)

National Aeronautics and Space Administration, Washington, DC.

The major events of the first manned moon landing mission, Apollo 11, are presented in chronological order from launch time until arrival of the astronauts aboard the U.S.S. Hornet. The log is descriptive, non-technical, and includes numerous color photographs of the astronauts on the moon. (PR)

Economic incentives exist to support measures to reduce illegal logging

Science.gov (United States)

J.A. Turner; J. Buongiorno; A. Katz; S. Zhu; R. Li

2008-01-01

Three studies of the global economic implications of eliminating illegal logging are summarized. Processors of illegally sourced wood would lose from the elimination of illegal logging through high prices for logs and decreased production of wood products. Associated with these changes could be losses in employment and income. Beyond these losses to the processing...

Interactive machine learning for postprocessing CT images of hardwood logs

Science.gov (United States)

Erol Sarigul; A. Lynn Abbott; Daniel L. Schmoldt

2003-01-01

This paper concerns the nondestructive evaluation of hardwood logs through the analysis of computed tomography (CT) images. Several studies have shown that the commercial value of resulting boards can be increased substantially if log sawing strategies are chosen using prior knowledge of internal log defects. Although CT imaging offers a potential means of obtaining...

A novel method for quantitative geosteering using azimuthal gamma-ray logging.

Science.gov (United States)

Yuan, Chao; Zhou, Cancan; Zhang, Feng; Hu, Song; Li, Chaoliu

2015-02-01

A novel method for quantitative geosteering by using azimuthal gamma-ray logging is proposed. Real-time up and bottom gamma-ray logs when a logging tool travels through a boundary surface with different relative dip angles are simulated with the Monte Carlo method. Study results show that response points of up and bottom gamma-ray logs when the logging tool moves towards a highly radioactive formation can be used to predict the relative dip angle, and then the distance from the drilling bit to the boundary surface is calculated. Copyright © 2014 Elsevier Ltd. All rights reserved.

Variability of macrofauna distribution along a dissipative log-spiral sandy beach in Rio de Janeiro, Southeastern Brazil

Directory of Open Access Journals (Sweden)

Carlos A.M. Barboza

2017-03-01

Full Text Available Log-spiral beaches display defined physical gradients alongshore. However, the majority of studies focus on the variability of a single population of macrofauna species. We aimed to investigate the variation in species distribution and in community structure along ten transects on a log-spiral beach. Principal component analysis indicated a clear physical gradient alongshore. Redundancy analysis showed that the sheltered end was related to smaller particle sizes, higher organic matter content and high densities of polychaetes. The exposed end was characterized by coarser sand, lower organic matter content and a high presence of crustaceans. Model selection indicated that the “best fit” to explain the variability in the number of individuals included grain size and beach slope. Variability of the polychaete Scolelepis squamata was best explained by grain size, slope and sediment sorting. The best model for the cirolanid Excirolana armata only included sediment sorting. The physical gradient in sediment texture and the beach slope explained more than one-third of the variability in community structure. The physical variables were also correlated with the distribution of the individual species. We showed that the physical gradient on log-spiral coasts may be an important driver of macrofauna variability, even at mesoscales and in dissipative conditions.

Log-periodic dipole antenna with low cross-polarization

DEFF Research Database (Denmark)

Pivnenko, Sergey

2006-01-01

In this work, log-periodic antennas with improved cross-polarization level were studied. It was found that some modifications of the traditional design lead to an essential improvement of the co-to-cross polarization ratio up to 40 dB. An improved design of a log-periodic dipole antenna with low...

Mitigating Hillslope Erosion After Post-fire Salvage Logging Operations

Science.gov (United States)

Robichaud, P. R.; Bone, E. D.; Brown, R. E.

2017-12-01

In the past decades, wildfires around the world have continued to increase in size, severity, and cost. Major concerns after wildfires are the increased runoff and erosion due to loss of the protective forest floor layer, loss of water storage, and creation of water repellent soil conditions. Salvage logging is often a post-fire forest management action to recoup the economic loss of the burned timber, yet concerns arise on the impacts of this activity on water quality. Recently, several studies have been conducted to determine the effect of salvage logging on hillslope erosion. Logging skid trails have been cited as being the cause of high erosion during and after salvage operations. We investigated the impacts of adding operational logging slash to skid trails to reduce hillslope erosion after salvage operations on the 2015 North Star Fire, Washington. We implemented well-designed rapid response approach to compare slash treatment effectiveness by monitoring sediment yield and runoff response from hillslopes with a concentrated flow (rill) experiment. Various runoff amounts are incrementally added to 4 m hillslope plots with and without slash treatments. Our initial results suggest that adding logging slash increased ground cover significantly which contributed to an order of magnitude decrease in hillslope erosion. Integrating erosion mitigation strategies into salvage logging operations should be commonplace when hillslope erosion is a concern.

Smartphone log data in a qualitative perspective

DEFF Research Database (Denmark)

Ørmen, Jacob; Thorhauge, Anne Mette

2015-01-01

into studies of smartphones in everyday life. Through an illustrative study, we explore a more nuanced perspective on what can be considered “log data” and how these types of data can be collected and analysed. A qualitative approach to log data analysis offers researchers new opportunities to situate......Log data from smartphones have primarily been used in large-scale research designs to draw statistical inferences from hundreds or even thousands of participants. In this article, we argue that more qualitatively oriented designs can also benefit greatly from integrating these rich data sources...... serve as cues to instigate discussion and reflection as well as act as resources for contextualizing and organizing related empirical material. In the discussion, the advantages of a qualitative perspective for research designs are assessed in relation to issues of validity. Further perspectives...

The calibration facilities of gamma-ray spectrometer oil logging system

International Nuclear Information System (INIS)

Zhao Yunlong; Liu Yuzhang; Duan Wenxian

1993-08-01

The construction technology for the calibration facilities of gamma-ray spectrometer oil logging system is introduced. It is referenced to the experience from similar calibration facilities at home and abroad. Facilities consist of 9 models. The effective diameter of each model is 1.5 m and the height is 6 m. Each borehole has U ore zone, Th ore zone, K ore zone, high mixed zone, high mixed thin zone, low mixed zone and barren zone. There are 45 zones in total. Each element model has 6 in, 8.5 in and 12 in of different diameters. The preventing radon migration and complete sealing technology are used for each zone to prevent radon from escaping. The density of models, homogeneity and moisture of radio elements have been measured that gives a complete data for calibration adjusting of the instrument. The sizes of facilities and the concentration of radioactivity are reasonable designed and conformed to the recommendation of IAEA. Parameters are consistent with the parameters of calibration facilities built by Houston University in America. The emanation coefficient of the facilities is lees than 1%. The dry density of filling is 2.12 g/cm 3 and the relative standard deviation is +- 1.9%

Utilization and cost of log production from animal loging operations

Science.gov (United States)

Suraj P. Shrestha; Bobby L. Lanford; Robert B. Rummer; Mark Dubois

2006-01-01

Forest harvesting with animals is a labor-intensive operation. It is expensive to use machines on smaller woodlots, which require frequent moves if mechanically logged. So, small logging systems using animals may be more cost effective. In this study, work sampling was used for five animal logging operations in Alabama to measure productive and non-productive time...

Dimension yields from short logs of low-quality hardwood trees.

Science.gov (United States)

Howard N. Rosen; Harold A. Stewart; David J. Polak

1980-01-01

Charts are presented for determining yields of 4/4 dimension cuttings from short hardwood logs of aspen, soft maple, black cherry, yellow-poplar, and black walnut for several cutting grades and bolt sizes. Cost comparisons of short log and standard grade mixes show sizes. Cost comparisons of short log and standard grade mixes show the estimated least expensive...

Research on Test-bench for Sonic Logging Tool

Directory of Open Access Journals (Sweden)

Xianping Liu

2016-01-01

Full Text Available In this paper, the test-bench for sonic logging tool is proposed and designed to realize automatic calibration and testing of the sonic logging tool. The test-bench System consists of Host Computer, Embedded Controlling Board, and functional boards. The Host Computer serves as the Human Machine Interface (HMI and processes uploaded data. The software running on Host Computer is designed on VC++, which is developed based on multithreading, Dynamic Linkable Library (DLL and Multiple Document Interface (MDI techniques. The Embedded Controlling Board uses ARM7 as the microcontroller and communicates with Host Computer via Ethernet. The Embedded Controlling Board software is realized based on embedded uclinux operating system with a layered architecture. The functional boards are designed based on Field Programmable Gate Array (FPGA and provide test interfaces for the logging tool. The functional board software is divided into independent sub-modules that can repeatedly be used by various functional boards and then integrated those sub-modules in the top layer. With the layered architecture and modularized design, the software system is highly reliable and extensible. With the help of designed system, a test has been conducted quickly and successfully on the electronic receiving cabin of the sonic logging tool. It demonstrated that the system could greatly improve the production efficiency of the sonic logging tool.

Kaizen aplicado à logística

OpenAIRE

Santos, Ana Catarina Almeida

2011-01-01

O presente trabalho propõe alcançar um aumento de produtividade e consequente redução de custos e desperdícios ajudando o departamento logístico da Empresa Revigrés – Industria de Revestimentos de Grés, Lda, a tornar-se mais eficiente, através da aplicação da filosofia kaizen que propõe melhorias no desempenho por implementação de pequenas ações. O objetivo deste projeto é a melhoria do departamento logístico globalmente, para isso houve o recurso a pesquisas e levantamento ...

Predictive models of forest logging residues of Triplochiton ...

African Journals Online (AJOL)

The model developed indicated that logarithmic functions performed better than other form of equation. The findings of this study revealed that there is significant logging residues left to waste in the forest after timber harvest and quantifying this logging residue in terms of biomass model can serve as management tools in ...

Applications of outcrop gamma-ray logging to field development and exploration

International Nuclear Information System (INIS)

Jordan, D.W.; Slatt, R.M.; Gillespie, R.H.; D'Agostino, A.E.; Scheihing, M.H.

1991-01-01

Gamma-ray logs of outcrops have been generated using two techniques. These techniques demonstrate the applicability of outcrop logging to better understand reservoir facies architecture and exploration type problems. The first logging technique employs the use of a standard logging truck and gamma-ray sonde. The truck is positioned near the top of the cliff face and the sonde is lowered to the bottom of the cliff. Gamma-ray counts are recorded as the sonde is raised at a constant rate. The second logging technique employs the use of a commercially available, hand-held, gamma-ray scintillometer. The tool measures total radiation at the outcrop. Equally-spaced measurements are made along the section and are displayed as a function of depth below a reference point. In this paper examples of gamma-ray logging experiments conducted on turbidities of the Jackfork Group (Pennsylvanian) in central and southern Arkansas are discussed, as are application of outcrop gamma-ray logging in the Long Beach Unit of Wilmington Oil Field, California, and Point Mugu (Santa Barbara Channel), California

A novel method for quantitative geosteering using azimuthal gamma-ray logging

International Nuclear Information System (INIS)

Yuan, Chao; Zhou, Cancan; Zhang, Feng; Hu, Song; Li, Chaoliu

2015-01-01

A novel method for quantitative geosteering by using azimuthal gamma-ray logging is proposed. Real-time up and bottom gamma-ray logs when a logging tool travels through a boundary surface with different relative dip angles are simulated with the Monte Carlo method. Study results show that response points of up and bottom gamma-ray logs when the logging tool moves towards a highly radioactive formation can be used to predict the relative dip angle, and then the distance from the drilling bit to the boundary surface is calculated. - Highlights: • A new method is proposed for geosteering by using azimuthal gamma-ray logging. • The new method can quantitatively determine the distance from the drilling bit to the boundary surface while the traditional geosteering method can only qualitatively guide the drilling bit in reservoirs. • The response points of real-time upper and lower gamma line when the logging tool meets high radioactive formation are used to predict the relative dip angles, and then the distance from the drilling bit to the boundary surface is calculated

Logging identification for the Lower Cambrian Niutitang shale reservoir in the Upper Yangtze region, China: A case study of the Cengong block, Guizhou Province

Directory of Open Access Journals (Sweden)

Ruyue Wang

2016-06-01

Full Text Available Currently, China has achieved a breakthrough in the Lower Silurian Longmaxi shale in Sichuan Basin and its surrounding areas. Compared to the Longmaxi shale, the Lower Cambrian Niutitang shale, which has a greater deposition thickness and wider distribution area, is another significant stratum for China's shale gas. Geophysical well logging is one of the most significant methods used for identification and evaluation of shale gas reservoirs throughout the process of shale gas exploration and development. In this paper, the logging response of the Niutitang shale is summarized to “four high and four low”, this was determined through a comparative analysis of three shale gas wells in the Cen'gong block. The Geochemical logging (GEM data shows that as the depth goes deeper the content of Si (quartz increases and the content of Al, Fe, K (Potassium, and Clay minerals decreases. In addition, the Niutitang shale mainly has the feature of a single peak or two continuous peaks in T2 spectrum on the nuclear magnetic resonance (NMR logging response. This has a longer T2 time and greater amplitude than normal shales. The logging response of various lithology and preservation is summarized by overlapping and a cross-plot analysis with the spectral gamma-ray, resistivity, density, acoustic, and compensated neutron logging data, which are sensitive to organic-rich shales. Moreover, the resistivity and acoustic logging data are sensitive to gas content, fluid properties, and preservation conditions, which can be used as indicators of shale gas content and preservation.

VT Route Log Points 2017

Data.gov (United States)

Vermont Center for Geographic Information — This data layer is used with VTrans' Integrated Route Log System (IRA). It is also used to calibrate the linear referencing systems, including the End-to-End and...

Well-logging method using well-logging tools run through a drill stem test string for determining in-situ change in formation water saturation values

International Nuclear Information System (INIS)

Fertl, W.H.

1975-01-01

A logging tool (pulsed neutron or neutron-gamma ray) whose response indicates formation water saturation value, is run through an opening extending through a portion of a drill stem test string. A sample portion of the formation fluid in the zone of interest is removed and another logging run is made. The differences between the plots of the two logging runs indicate the formation potential productivity in the zone of interest

Cost of skid roads for arch logging in West Virginia

Science.gov (United States)

George R., Jr. Trimble; Carl R. Barr

1960-01-01

In the mountain hardwood country of the northern Appalachians, tree-length skidding with tractor and arch has proved to be economical logging. One essential part of this type of logging is that tree-length logs are winched to the skid roads: tractor and arch do not run around through the woods. Winching distance is commonly 200 to 300 feet; and occasionally an extra...

Environmental effects of postfire logging: literature review and annotated bibliography.

Science.gov (United States)

James D. McIver; Lynn Starr

2000-01-01

The scientific literature on logging after wildfire is reviewed, with a focus on environmental effects of logging and removal of large woody structure. Rehabilitation, the practice of planting or seeding after logging, is not reviewed here. Several publications are cited that can be described as “commentaries,” intended to help frame the public debate. We review 21...

Ultrafast CT scanning of an oak log for internal defects

Science.gov (United States)

Francis G. Wagner; Fred W. Taylor; Douglas S. Ladd; Charles W. McMillin; Fredrick L. Roder

1989-01-01

Detecting internal defects in sawlogs and veneer logs with computerized tomographic (CT) scanning is possible, but has been impractical due to the long scanning time required. This research investigated a new scanner able to acquire 34 cross-sectional log scans per second. This scanning rate translates to a linear log feed rate of 85 feet (25.91 m) per minute at one...

Importance of well logging measurements in the design of underground railway tunnels

International Nuclear Information System (INIS)

Kiss, E.Z.; Szlaboczky, P.

1981-01-01

The paper shows how logs can be used in the construction of underground railway tunnels in terciary sediments. Even standard well logging techniques (electric conductivity, gamma logging) can provide important additional information on the wells if conclusions concerning construction technology are gained from the logs. In the course of continuous research work the application of well logs renders an essential help if the measurements give in-situ information on absolute values of the well sections by revealing the various geological formations based on the distribution of characteristic parameters. Well logging increases the resolving power of the mechanical method of layer differentiation. Beside the usual geological interpretation of logs the zones of shifting rocks, hard and friable formations as well as intercalations leading to problems in construction technology can be pointed out. (author)

The analog CTS communication interface in nuclear logging

International Nuclear Information System (INIS)

Li Min

2000-01-01

The author introduced a micro-controller-based CTS communication interface in nuclear logging, which provided convenience for the overhaul and regulation of the logging tool in CTS communication system. The use of micro-controller simplified the hardware structure of the interface, made the soft structure more rational and the whole system more flexible to control

Bird species and traits associated with logged and unlogged forest in Borneo.

Science.gov (United States)

Cleary, Daniel F R; Boyle, Timothy J B; Setyawati, Titiek; Anggraeni, Celina D; Van Loon, E Emiel; Menken, Steph B J

2007-06-01

The ecological consequences of logging have been and remain a focus of considerable debate. In this study, we assessed bird species composition within a logging concession in Central Kalimantan, Indonesian Borneo. Within the study area (approximately 196 km2) a total of 9747 individuals of 177 bird species were recorded. Our goal was to identify associations between species traits and environmental variables. This can help us to understand the causes of disturbance and predict whether species with given traits will persist under changing environmental conditions. Logging, slope position, and a number of habitat structure variables including canopy cover and liana abundance were significantly related to variation in bird composition. In addition to environmental variables, spatial variables also explained a significant amount of variation. However, environmental variables, particularly in relation to logging, were of greater importance in structuring variation in composition. Environmental change following logging appeared to have a pronounced effect on the feeding guild and size class structure but there was little evidence of an effect on restricted range or threatened species although certain threatened species were adversely affected. For example, species such as the terrestrial insectivore Argusianus argus and the hornbill Buceros rhinoceros, both of which are threatened, were rare or absent in recently logged forest. In contrast, undergrowth insectivores such as Orthotomus atrogularis and Trichastoma rostratum were abundant in recently logged forest and rare in unlogged forest. Logging appeared to have the strongest negative effect on hornbills, terrestrial insectivores, and canopy bark-gleaning insectivores while moderately affecting canopy foliage-gleaning insectivores and frugivores, raptors, and large species in general. In contrast, undergrowth insectivores responded positively to logging while most understory guilds showed little pronounced effect

Perfil logístico del sector cemento en Colombia

OpenAIRE

Hernández Calderón, Miguel Ángel; Nieves de la Hoz, Celia Elena

2015-01-01

Este proyecto caracteriza la logística del sector cemento en Colombia al identificar y describir los principales actores, procesos y materiales involucrados en la cadena de suministros del sector. Este documento compila la información logística relevante para la producción de cemento en Colombia. Esta información se obtuvo sintetizando estudios y reportes acerca de las prácticas logísticas y las condiciones en las que éstas se desarrollan. Adicionalmente se realizaron visitas empresariales en...

Results of mine logging in Sn-W prospectina in Cinovec deposit

International Nuclear Information System (INIS)

Kudrna, R.; Masek, K.; Pavlik, I.; Rejl, L.

1984-01-01

The method is suggested of indicating cassiterite ore mineralization in the Cinovec deposit by combining the methods of selective gamma-gamma logging and magnetic susceptibility logging. The estimate of the tin content was based on selective gamma-gamma logging. (B.S.)

Defect core detection in radiata pine logs

International Nuclear Information System (INIS)

Wallace, G.

1993-01-01

Internal defect cores in Pinus radiata logs arise primarily from the practice in New Zealand of pruning trees to increase the amount of clear wood. Realising the benefits of this practice when milling the logs is hampered by the lack of a practical method for detecting the defect cores. This report attempts to establish industry requirements for detections and examine techniques which may be suitable. Some trials of a novel technique are described. (author) 19 refs.; 11 figs

Displacement length and velocity of tagged logs in the tagliamento river

Directory of Open Access Journals (Sweden)

Diego Ravazzolo

2013-09-01

Full Text Available Large wood enhance the dynamics of geomorphic processes in river systems, increases the morphological complexity of the channel bed, and provides habitats for fish and invertebrates. On the other side, if transported during high-magnitude events, large wood pieces can increase flood risks in sensitive places such as bridges and narrow cross sections prone to outbank flows. However, the dynamics and mobility of logs in rivers is poorly understood, especially in wide gravel-bed rivers. Recent studies have employed fixed video cameras to assess logs velocity, but little evidence is still available about travel length during flood events of different magnitude. This study was conducted in a valley reach of the Tagliamento river, located in the North East of Italy. The Tagliamento river is approximately 800 m wide in the study area, and is characterized by relatively high natural conditions and complex fluvial dynamics. Log mobility have been studied from June 2010 to October 2011, a period characterized by a relatively high magnitude flood in November 2010. Log mobility and displacement during floods have been measured by implanting active radio transmitters (RFID in 113 logs and GPS track devices in 42 logs. The first devices allow to recover the log after flood events by using a portable antenna, and to derive the displacement length over the monitoring period, whereas the second devices allows to calculate instantaneous (1 sec and average log velocity of moving logs. Recovery rate of logs equipped with RFID and GPS was about 50% and 60%, respectively. A preliminary analysis of the data collected indicates that there is a positive relationship between displacement length and the peak of flood events, as well as a positive relationship between log velocity and the flood magnitude. Also, a critical flow rate over which logs stranded on active bars can be transported has been identified. The ability to predict wood mobility in gravel-bed rivers could

Generating porosity spectrum of carbonate reservoirs using ultrasonic imaging log

Science.gov (United States)

Zhang, Jie; Nie, Xin; Xiao, Suyun; Zhang, Chong; Zhang, Chaomo; Zhang, Zhansong

2018-03-01

Imaging logging tools can provide us the borehole wall image. The micro-resistivity imaging logging has been used to obtain borehole porosity spectrum. However, the resistivity imaging logging cannot cover the whole borehole wall. In this paper, we propose a method to calculate the porosity spectrum using ultrasonic imaging logging data. Based on the amplitude attenuation equation, we analyze the factors affecting the propagation of wave in drilling fluid and formation and based on the bulk-volume rock model, Wyllie equation and Raymer equation, we establish various conversion models between the reflection coefficient β and porosity ϕ. Then we use the ultrasonic imaging logging and conventional wireline logging data to calculate the near-borehole formation porosity distribution spectrum. The porosity spectrum result obtained from ultrasonic imaging data is compared with the one from the micro-resistivity imaging data, and they turn out to be similar, but with discrepancy, which is caused by the borehole coverage and data input difference. We separate the porosity types by performing threshold value segmentation and generate porosity-depth distribution curves by counting with equal depth spacing on the porosity image. The practice result is good and reveals the efficiency of our method.

Local regularity analysis of strata heterogeneities from sonic logs

Directory of Open Access Journals (Sweden)

S. Gaci

2010-09-01

Full Text Available Borehole logs provide geological information about the rocks crossed by the wells. Several properties of rocks can be interpreted in terms of lithology, type and quantity of the fluid filling the pores and fractures.

Here, the logs are assumed to be nonhomogeneous Brownian motions (nhBms which are generalized fractional Brownian motions (fBms indexed by depth-dependent Hurst parameters H(z. Three techniques, the local wavelet approach (LWA, the average-local wavelet approach (ALWA, and Peltier Algorithm (PA, are suggested to estimate the Hurst functions (or the regularity profiles from the logs.

First, two synthetic sonic logs with different parameters, shaped by the successive random additions (SRA algorithm, are used to demonstrate the potential of the proposed methods. The obtained Hurst functions are close to the theoretical Hurst functions. Besides, the transitions between the modeled layers are marked by Hurst values discontinuities. It is also shown that PA leads to the best Hurst value estimations.

Second, we investigate the multifractional property of sonic logs data recorded at two scientific deep boreholes: the pilot hole VB and the ultra deep main hole HB, drilled for the German Continental Deep Drilling Program (KTB. All the regularity profiles independently obtained for the logs provide a clear correlation with lithology, and from each regularity profile, we derive a similar segmentation in terms of lithological units. The lithological discontinuities (strata' bounds and faults contacts are located at the local extrema of the Hurst functions. Moreover, the regularity profiles are compared with the KTB estimated porosity logs, showing a significant relation between the local extrema of the Hurst functions and the fluid-filled fractures. The Hurst function may then constitute a tool to characterize underground heterogeneities.

Logística e Atualidade - Empregando TI em Novas Oportunidades

OpenAIRE

Araujo, Jefferson Borges; UNIABEU

2011-01-01

Este trabalho apresenta inicialmente um histórico sobre a logística, seus principais objetivos e funções. São apontadas as principais dificuldades no processo de Gestão de Logística e identificada a utilização agressiva de Tecnologia da Informação como forte candidata para otimização dos processos da área de logística. São apresentados os conceitos envolvidos na técnica de Mineração de Dados – Data Mining e sua aplicação no campo da logística. São apresentadas as diversas técnicas associadas ...

Midwest Logging Firm Perspectives: Harvesting on Increasingly Parcelized Forestlands

Directory of Open Access Journals (Sweden)

Shorna Allred

2011-01-01

Full Text Available Loggers play a critical role in the sustainable production of wood and paper products, and harvesting activities contribute to economic health and viability of many Upper Midwest communities in the United States. If the logging sector is unable to procure wood efficiently and economically from an increasingly parcelized land base, the competitive ability of the forest industry could be jeopardized. Little is known about the functions of the logging sector related to the forest resource land base on which they depend, and it is imperative to improve our understanding of this important part of the forest industry. The purpose of this study was to determine prospective attitudes about the future of the logging industry and how trends in forestland parcelization and harvesting mechanization are impacting the logging industry, especially as it relates to smaller tracts of land.

Tractor-logging costs and production in old-growth redwood forests

Science.gov (United States)

Kenneth N. Boe

1963-01-01

A cost accounting analysis of full-scale logging operations in old-growth redwood during 2 years revealed that it cost $12.24 per M bd. ft. (gross Scribner log scale) to get logs on trucks. Road development costs averaged another $5.19 per M bd. ft. Felling-bucking production was calculated by average tree d.b.h. Both skidding and loading outputs per hour were...

Analyzing Decision Logs to Understand Decision Making in Serious Crime Investigations.

Science.gov (United States)

Dando, Coral J; Ormerod, Thomas C

2017-12-01

Objective To study decision making by detectives when investigating serious crime through the examination of decision logs to explore hypothesis generation and evidence selection. Background Decision logs are used to record and justify decisions made during serious crime investigations. The complexity of investigative decision making is well documented, as are the errors associated with miscarriages of justice and inquests. The use of decision logs has not been the subject of an empirical investigation, yet they offer an important window into the nature of investigative decision making in dynamic, time-critical environments. Method A sample of decision logs from British police forces was analyzed qualitatively and quantitatively to explore hypothesis generation and evidence selection by police detectives. Results Analyses revealed diversity in documentation of decisions that did not correlate with case type and identified significant limitations of the decision log approach to supporting investigative decision making. Differences emerged between experienced and less experienced officers' decision log records in exploration of alternative hypotheses, generation of hypotheses, and sources of evidential inquiry opened over phase of investigation. Conclusion The practical use of decision logs is highly constrained by their format and context of use. Despite this, decision log records suggest that experienced detectives display strategic decision making to avoid confirmation and satisficing, which affect less experienced detectives. Application Potential applications of this research include both training in case documentation and the development of new decision log media that encourage detectives, irrespective of experience, to generate multiple hypotheses and optimize the timely selection of evidence to test them.

Nuclear cross section library for oil well logging analysis

International Nuclear Information System (INIS)

Kodeli, I.; Kitsos, S.; Aldama, D.L.; Zefran, B.

2003-01-01

As part of the IRTMBA (Improved Radiation Transport Modelling for Borehole Applications) Project of the EU Community's 5 th Programme a special purpose multigroup cross section library to be used in the deterministic (as well as Monte Carlo) oil well logging particle transport calculations was prepared. This library is expected to improve the prediction of the neutron and gamma spectra at the detector positions of the logging tool, and their use for the interpretation of the neutron logging measurements was studied. Preparation and testing of this library is described. (author)

Physical and measuring principles of nuclear well logging techniques

International Nuclear Information System (INIS)

Loetzsch, U.; Winkler, R.

1981-01-01

Proceeding from the general task of nuclear geophysics as a special discipline of applied geophyscis, the essential physical problems of nuclear well logging techniques are considered. Particularly, the quantitative relationship between measured values and interesting geologic parameters to be determined are discussed taking into account internal and external perturbation parameters. Resulting from this study, the technological requirements for radiation sources and their shielding, for detectors, electronic circuits in logging tools, signal transmission by cable and recording equipment are derived, and explained on the basis of examples of gamma-gamma and neutron-neutron logging. (author)

Scientific results from the deepened Lopra-1 borehole, Faroe Islands: Wire-line log-based stratigraphy of flood basalts from the Lopra-1/1A well, Faroe Islands

Directory of Open Access Journals (Sweden)

Boldreel, Lars O.

2006-07-01

Full Text Available The present study shows that it is possible to use conventional borehole logs to perform a detailed lithological/stratigraphical division of a column of subaerially extruded basalt. A stratigraphical division of the subaerial flood basalts penetrated by the Lopra-1/1A well has been carried out using new wire-line logging data measured in 1996 in the interval 200–2489 m depth. Resistivity data acquired in the interval 200–2178 m depth during 1981 after the initial drilling of the Lopra-1 well have also been incorporated. Eighty-six individual flow units, 18 compound flows and two dolerite dykes have been identified by combining the NPHI porosity, RHOB density, P-, S- and Stonely-sonic transit time, calliper and resistivity logs. Fifty-two sedimentary/tuffaceous layers have also been identified using the CGR and SGR gamma ray and potassium logs in combination with the aforementioned logs. Within the flow units, sonic velocity, density and resistivity are highest in the core where porosity is lowest. This relation is reversed in the uppermost and basal zones of the flow units. The sonic velocity in the core seems to be independent of the thickness of the flow unit. Porous zones seem abundant in some cores and the total section of cores containing porous zones constitutes more than 70% of the thickness of its flow unit, but where porous zones are absent the core makes up only roughly 50% of the thickness of the flow. It is suggested that the flow units with porous cores represent aa flows (88% of the flow units and the others pahoehoe flows (12% of the flow units.The log pattern of the flow units (crust, core and basal zone is similar to log patterns reported from other basalt plateaux. However the patterns in Lopra-1/1A show a larger variation than elsewhere,suggesting that the flow units are more complex vertically than previously thought. Statistical analysis of P-, S- and Stonely-waves, RHOB, NPHI, resistivity, gamma and calliper logs has

CS model coil experimental log book

International Nuclear Information System (INIS)

Nishijima, Gen; Sugimoto, Makoto; Nunoya, Yoshihiko; Wakabayashi, Hiroshi; Tsuji, Hiroshi

2001-02-01

Charging test of the ITER CS Model Coil which is the world's largest superconducting pulse coil and the CS Insert Coil had started at April 11, 2000 and had completed at August 18, 2000. In the campaign, total shot numbers were 356 and the size of the data file in the DAS (Data Acquisition System) was over 20 GB. This report is a database that consists of the log list and the log sheets of every shot. One can access the database, make a search, and browse results via Internet (http://1ogwww.naka.jaeri.go.jp). The database will be useful to quick search to choose necessary shots. (author)

Well logging instrumental and methodological research

International Nuclear Information System (INIS)

Andrassy, L.; Barath, I.; Dorko, R.

1983-01-01

This part of the Annual Report of the Roland Eoetvoes Geophysical Institute (ELGI) of Hungary for 1982, summarizes the well logging instrumental and methodological researches of ELGI. The theoretical neutron diffusion fluxes for black and brown coals of Hungarian mines were calculated. A coal probe was developed and tested in boreholes using computerized data processing and interpretation. An X-ray radiometric method was used for the determination of Cu and Fe contents of minerals. Researches in the field of magnetic susceptibility and induced polarization logging are also summarized. A rapid analyzer for bauxite mining and a photorecorder for petroleum industry were developed by ELGI. (D.Gy.)

Pricing FX Options in the Heston/CIR Jump-Diffusion Model with Log-Normal and Log-Uniform Jump Amplitudes

Directory of Open Access Journals (Sweden)

Rehez Ahlip

2015-01-01

model for the exchange rate with log-normal jump amplitudes and the volatility model with log-uniformly distributed jump amplitudes. We assume that the domestic and foreign stochastic interest rates are governed by the CIR dynamics. The instantaneous volatility is correlated with the dynamics of the exchange rate return, whereas the domestic and foreign short-term rates are assumed to be independent of the dynamics of the exchange rate and its volatility. The main result furnishes a semianalytical formula for the price of the foreign exchange European call option.

Conversation Threads Hidden within Email Server Logs

Science.gov (United States)

Palus, Sebastian; Kazienko, Przemysław

Email server logs contain records of all email Exchange through this server. Often we would like to analyze those emails not separately but in conversation thread, especially when we need to analyze social network extracted from those email logs. Unfortunately each mail is in different record and those record are not tided to each other in any obvious way. In this paper method for discussion threads extraction was proposed together with experiments on two different data sets - Enron and WrUT..

A revised design and implementation of the ATLAS Log Service package

Science.gov (United States)

Murillo Garcia, Raul; Lehamnn Miotto, Giovanna; ATLAS TDAQ Collaboration

2011-12-01

This paper presents a revised design and implementation of the Log Service for the ATLAS Trigger and Data Acquisition (TDAQ) framework at CERN. A previous version of this utility was rarely used for various reasons, herein explained. The lessons learned set the grounds and motivation for a new redesign. The Log Service consists of the Logger, the entity that collects logs and stores them in an Oracle database; a set of user utilities to access and maintain the database; and a Java based tool, known as the Log Manager, which provides a compact and intuitive interface for browsing the log messages based on a user defined search criteria. The outline of these software components are explained, including various optimization techniques deployed in order to handle the large volume of entries expected to be stored in the database. Finally, a performance study has been conducted to prove the validity and behavior of the Log Service.

A revised design and implementation of the ATLAS Log Service package

CERN Document Server

Murillo García, R; The ATLAS collaboration

2010-01-01

This paper presents a revised design and implementation of the Log Service for the ATLAS Trigger and Data Acquisition (TDAQ) framework at CERN. A previous version of this utility was rarely used for various reasons, herein explained. The lessons learned set the grounds and motivation for a new redesign. The Log Service consists of the Logger, the entity that collects logs and stores them in an Oracle database; a set of user utilities to access and maintain the database; and a Java based tool, known as the Log Manager, which provides a compact and intuitive interface for browsing the log messages based on a user defined search criteria. The outline of these software components are explained, including various optimization techniques deployed in order to handle the large volume of entries expected to be stored in the database. Finally, a performance study has been conducted to prove the validity and behavior of the Log Service.

New materials for fireplace logs

Science.gov (United States)

Kieselback, D. J.; Smock, A. W.

1971-01-01

Fibrous insulation and refractory concrete are used for logs as well as fireproof walls, incinerator bricks, planters, and roof shingles. Insulation is lighter and more shock resistant than fireclay. Lightweight slag bonded with refractory concrete serves as aggregrate.

Pinpointing water entries using pulsed neutron and Production logging tools

International Nuclear Information System (INIS)

Mukerji, P.; Oluwa, J.

2003-01-01

A successful work over requires a comprehensive understanding of fluid entries into the wellbore and fluid contact movement in the reservoir. Such information can be obtained by a combination of production logs and saturation-monitoring measurements. The ability to combine pulsed neutron and production logging tools provides the operator with better diagnostics for identifying candidates for remedial actions and greatly increases the possibility of a successful well intervention. Advances in pulsed neutron spectroscopy tools have improved the accuracy and precision of measured carbon/oxygen ratios. Some of the improvements in accuracy and precision have resulted from better tool characterization in a wider variety of logging environments in the calibration facility and new spectral standards. Coincident with the advances in pulsed neutron spectroscopy has been the development of production logging measurements run on a platform common. We will show how the application of pulsed neutron and production logs can optimize subsequent well intervention to reduce water production and/or increase oil production

Get better cased well data with the carbon/oxygen log

International Nuclear Information System (INIS)

Fertl, W.H.; Frost, E.

1982-01-01

Using case studies from heavy oil environments in the U.S. and Canada, it is shown how the continuous carbon/oxygen log, a type of pulsed neutron log, has proven an effective cased-hole reservoir evaluation and monitoring device. The article is a follow-up to one last month that detailed how the C/O log operates and reviewed case studies of its use in sandstone and carbonate environments

Uranium logging in earth formations

International Nuclear Information System (INIS)

Givens, W.W.

1979-01-01

A technique is provided for assaying the formations surrounding a borehole for uranium. A borehole logging tool cyclically irradiates the formations with neutrons and responds to neutron fluxes produced during the period of time that prompt neutrons are being produced by the neutron fission of uranium in the formations. A borehole calibration tool employs a steady-state (continuous output) neutron source, firstly, to produce a response to neutron fluxes in models having known concentrations of uranium and, secondly, to to produce a response to neutron fluxes in the formations surrounding the borehole. The neutron flux responses of the borehole calibration tool in both the model and the formations surrounding the borehole are utilized to correct the neutron flux response of the borehole logging tool for the effects of epithermal/thermal neutron moderation, scattering, and absorption within the borehole itself

Fracture diagnostics with tube wave reflection logs

International Nuclear Information System (INIS)

Medlin, W.L.

1991-01-01

This paper reports on the Tube Wave Reflection Log (TWRL) which is acoustic logging method which provides information about the height, location and conductivity of hydraulically induced fractures behind perforated casing. The TWRL tool consists of a transmitter and closely spaced receiver. The transmitter is driven with a short, low frequency tone burst to generate long wavelength tube waves which are little attenuated in unperforated casing. They are partially reflected when they pass perforated intervals communicating with a hydraulically induced fracture. The tool listens for such reflections for 0.1 seconds following each excitation burst. As the tool is moved uphole at logging speed, the transmitter is excited at each foot of depth. VDL displays of the TWRL records provide reflection traces whose projections define the uppermost and lower-most perforations communicating with the fracture. The strength of the reflections depends on the ease of fluid flow into the fracture and thus, is an indicator of fracture conductivity

Fates of trees damaged by logging in Amazonian Bolivia

NARCIS (Netherlands)

Shenkin, A.; Bolker, B.; Peña Claros, M.; Licona, J.C.; Putz, F.E.

2015-01-01

Estimation of carbon losses from trees felled and incidentally-killed during selective logging of tropical forests is relatively straightforward and well-documented, but less is known about the fates of collaterally-damaged trees that initially survive. Tree response to logging damage is an

Log files can and should be prepared for a functionalistic approach

DEFF Research Database (Denmark)

Bergenholtz, Henning; Johnsen, Mia

2007-01-01

-ups. However, log file analyses have also been characterised by a juggling of num­bers based on data calculations of limited direct relevance to practical and theoretical lexicography. This article proposes the development of lexicographically relevant log files for the use in log file analyses in order...

Reduced-impact logging and biodiversity conservation: a case study from Borneo.

Science.gov (United States)

Edwards, David P; Woodcock, Paul; Edwards, Felicity A; Larsen, Trond H; Hsu, Wayne W; Benedick, Suzan; Wilcove, David S

2012-03-01

A key driver of rain forest degradation is rampant commercial logging. Reduced-impact logging (RIL) techniques dramatically reduce residual damage to vegetation and soils, and they enhance the long-term economic viability of timber operations when compared to conventionally managed logging enterprises. Consequently, the application of RIL is increasing across the tropics, yet our knowledge of the potential for RIL also to reduce the negative impacts of logging on biodiversity is minimal. We compare the impacts of RIL on birds, leaf-litter ants, and dung beetles during a second logging rotation in Sabah, Borneo, with the impacts of conventional logging (CL) as well as with primary (unlogged) forest. Our study took place 1-8 years after the cessation of logging. The species richness and composition of RIL vs. CL forests were very similar for each taxonomic group. Both RIL and CL differed significantly from unlogged forests in terms of bird and ant species composition (although both retained a large number of the species found in unlogged forests), whereas the composition of dung beetle communities did not differ significantly among forest types. Our results show little difference in biodiversity between RIL and CL over the short-term. However, biodiversity benefits from RIL may accrue over longer time periods after the cessation of logging. We highlight a severe lack of studies investigating this possibility. Moreover, if RIL increases the economic value of selectively logged forests (e.g., via REDD+, a United Nations program: Reducing Emissions from Deforestation and Forest Degradation in Developing Countries), it could help prevent them from being converted to agricultural plantations, which results in a tremendous loss of biodiversity.

Radiomic modeling of BI-RADS density categories

Science.gov (United States)

Wei, Jun; Chan, Heang-Ping; Helvie, Mark A.; Roubidoux, Marilyn A.; Zhou, Chuan; Hadjiiski, Lubomir

2017-03-01

Screening mammography is the most effective and low-cost method to date for early cancer detection. Mammographic breast density has been shown to be highly correlated with breast cancer risk. We are developing a radiomic model for BI-RADS density categorization on digital mammography (FFDM) with a supervised machine learning approach. With IRB approval, we retrospectively collected 478 FFDMs from 478 women. As a gold standard, breast density was assessed by an MQSA radiologist based on BI-RADS categories. The raw FFDMs were used for computerized density assessment. The raw FFDM first underwent log-transform to approximate the x-ray sensitometric response, followed by multiscale processing to enhance the fibroglandular densities and parenchymal patterns. Three ROIs were automatically identified based on the keypoint distribution, where the keypoints were obtained as the extrema in the image Gaussian scale-space. A total of 73 features, including intensity and texture features that describe the density and the parenchymal pattern, were extracted from each breast. Our BI-RADS density estimator was constructed by using a random forest classifier. We used a 10-fold cross validation resampling approach to estimate the errors. With the random forest classifier, computerized density categories for 412 of the 478 cases agree with radiologist's assessment (weighted kappa = 0.93). The machine learning method with radiomic features as predictors demonstrated a high accuracy in classifying FFDMs into BI-RADS density categories. Further work is underway to improve our system performance as well as to perform an independent testing using a large unseen FFDM set.

The human factors of implementing shift work in logging operations.

Science.gov (United States)

Mitchell, D L; Gallagher, T V; Thomas, R E

2008-10-01

A fairly recent development in the forest industry is the use of shift work in logging in the southeastern U.S. Logging company owners are implementing shift work as an opportunity to increase production and potentially reduce the cost of producing each unit of wood, without consideration of the potential impacts on the logging crew. There are many documented physiological and psychological impacts on workers from shift work in a variety of industries, although few address forestry workers in the U.S. Semi-structured interviews were performed to gather information about how logging company owners were implementing shift work in seven southeastern states. Data collected during the interviews included employee turnover, shift hours, shift scheduling, safety considerations, and production impacts. Various work schedules were employed. The majority of the schedules encompassed less than 24 hours per day. Permanent and rotating shift schedules were found. None of the logging company owners used more than two crews in a 24-hour period. Additional safety precautions were implemented as a result of working after dark. No in-woods worker accidents or injuries were reported by any of those interviewed. Results indicate that a variety of work schedules can be successfully implemented in the southeastern logging industry.

Suitable habitats for endangered frugivorous mammals: small-scale comparison, regeneration forest and chimpanzee density in Kibale National Park, Uganda.

Directory of Open Access Journals (Sweden)

Sarah Bortolamiol

Full Text Available Landscape patterns and chimpanzee (Pan troglodytes schweinfurthii densities in Kibale National Park show important variation among communities that are geographically close to one another (from 1.5 to 5.1 chimpanzees/km2. Anthropogenic activities inside the park (past logging activities, current encroachment and outside its limits (food and cash crops may impact the amount and distribution of food resources for chimpanzees (frugivorous species and their spatial distribution within the park. Spatial and temporal patterns of fruit availability were recorded over 18 months at Sebitoli (a site of intermediate chimpanzee density and higher anthropic pressure with the aim of understanding the factors explaining chimpanzee density there, in comparison to results from two other sites, also in Kibale: Kanyawara (low chimpanzee density and Ngogo (high density, and furthest from Sebitoli. Because of the post-logging regenerating status of the forest in Sebitoli and Kanyawara, smaller basal area (BA of fruiting trees most widely consumed by the chimpanzees in Kanyawara and Sebitoli was expected compared to Ngogo (not logged commercially. Due to the distance between sites, spatial and temporal fruit abundance in Sebitoli was expected to be more similar to Kanyawara than to Ngogo. While species functional classes consumed by Sebitoli chimpanzees (foods eaten during periods of high or low fruit abundance differ from the two other sites, Sebitoli is very similar to Kanyawara in terms of land-cover and consumed species. Among feeding trees, Ficus species are particularly important resources for chimpanzees at Sebitoli, where their basal area is higher than at Kanywara or Ngogo. Ficus species provided a relatively consistent supply of food for chimpanzees throughout the year, and we suggest that this could help to explain the unusually high density of chimpanzees in such a disturbed site.

The STAR ESL, electronic shift and handover log

Energy Technology Data Exchange (ETDEWEB)

Hajdu, L; Lauret, J, E-mail: lbhajdu@bnl.gov

2008-07-01

Keeping a clear and accurate experiment log is important for any scientific experiment. The concept is certainly not new but keeping accurate while useful records for a Nuclear Physics experiment such as the Solenoidal Tracker at the Relativistic Heavy Ion Collider (STAR at RHIC) is not a priori a simple matter - STAR operates 24 hours a day for six months out of the year with more than 24 shift crews operating 16 different subsystems (some located remotely). To meet the challenge of not only logging the information but passing it in a concise manner from one shift to another, the STAR experiment has designed an Electronic Shift-Log (ESL), a flexible application written in Java and interfacing with the Data Acquisition tools, Quality Assurance reporting, Online shift crews or remote personnel and experts as well as including features such as shift change-over (or handover) forms, tailored to the sub-group of interest. We will present an overview of STAR's Electronic Log, a system that is clear, reliable, safe, consistent, easy to use and globally viewable in real time with secure connections.

New portable neutron generator for well logging

International Nuclear Information System (INIS)

Chicanov, A.E.; Gromov, E. V.; Gulko, V. M.; Izmailov, A. V.

1994-01-01

The information about the design, investigation and testing of new well neutron generator for the pulse neutron logging (PNL) is given in this paper. The main physical characteristics of new PNL apparatus are: Neutron flux 2.10 sup 8 n/s ; Pulse frequency>=400 Hz; Diameter= 90 mm; Logging velocity >200 m/h; Number of probes = 2; Resource > 300 h. The generator were provided by gas-filled neutron accelerative tube named NTF-2. The perspective of application and optimization shown PNL apparatus are considered. (author)

Influence of borehole-eccentred tools on wireline and logging-while-drilling sonic logging measurements

KAUST Repository

Pardo, David

2013-02-13

We describe a numerical study to quantify the influence of tool-eccentricity on wireline (WL) and logging-while-drilling (LWD) sonic logging measurements. Simulations are performed with a height-polynomial-adaptive (hp) Fourier finite-element method that delivers highly accurate solutions of linear visco-elasto-acoustic problems in the frequency domain. The analysis focuses on WL instruments equipped with monopole or dipole sources and LWD instruments with monopole excitation. Analysis of the main propagation modes obtained from frequency dispersion curves indicates that the additional high-order modes arising as a result of borehole-eccentricity interfere with the main modes (i.e., Stoneley, pseudo-Rayleigh and flexural). This often modifies (decreases) the estimation of shear and compressional formation velocities, which should be corrected (increased) to account for borehole-eccentricity effects. Undesired interferences between different modes can occur at different frequencies depending upon the properties of the formation and fluid annulus size, which may difficult the estimation of the formation velocities. © 2013 European Association of Geoscientists & Engineers.

Development of interpretation models for PFN uranium log analysis

International Nuclear Information System (INIS)

Barnard, R.W.

1980-11-01

This report presents the models for interpretation of borehole logs for the PFN (Prompt Fission Neutron) uranium logging system. Two models have been developed, the counts-ratio model and the counts/dieaway model. Both are empirically developed, but can be related to the theoretical bases for PFN analysis. The models try to correct for the effects of external factors (such as probe or formation parameters) in the calculation of uranium grade. The theoretical bases and calculational techniques for estimating uranium concentration from raw PFN data and other parameters are discussed. Examples and discussions of borehole logs are included

Application of computer mathematical modeling in nuclear well-logging industry

International Nuclear Information System (INIS)

Cai Shaohui

1994-01-01

Nuclear well logging techniques have made rapid progress since the first well log calibration facility (the API pits) was dedicated in 1959. Then came the first computer mathematical model in the late 70's. Mathematical modeling can now minimize design and experiment time, as well as provide new information and idea on tool design, environmental effects and result interpretation. The author gives a brief review on the achievements of mathematical modeling on nuclear logging problems

[Using log-binomial model for estimating the prevalence ratio].

Science.gov (United States)

Ye, Rong; Gao, Yan-hui; Yang, Yi; Chen, Yue

2010-05-01

To estimate the prevalence ratios, using a log-binomial model with or without continuous covariates. Prevalence ratios for individuals' attitude towards smoking-ban legislation associated with smoking status, estimated by using a log-binomial model were compared with odds ratios estimated by logistic regression model. In the log-binomial modeling, maximum likelihood method was used when there were no continuous covariates and COPY approach was used if the model did not converge, for example due to the existence of continuous covariates. We examined the association between individuals' attitude towards smoking-ban legislation and smoking status in men and women. Prevalence ratio and odds ratio estimation provided similar results for the association in women since smoking was not common. In men however, the odds ratio estimates were markedly larger than the prevalence ratios due to a higher prevalence of outcome. The log-binomial model did not converge when age was included as a continuous covariate and COPY method was used to deal with the situation. All analysis was performed by SAS. Prevalence ratio seemed to better measure the association than odds ratio when prevalence is high. SAS programs were provided to calculate the prevalence ratios with or without continuous covariates in the log-binomial regression analysis.

The pdk-100 enhances interpretation capabilities for pulsed neutron capture logs

International Nuclear Information System (INIS)

Randall, R.R.; Oliver, D.W.; Ferti, W.H.

1986-01-01

The PDK-100 is a new pulsed neutron logging system designed to measure Sigma (Σ), the macroscopic thermal neutron capture cross section. In addition to determining Σ, the system provides logging curves which are a measure of formation porosity and which furnish information concerning borehole conditions. This paper reviews the principles of operation of the PDK-100, and presents examples which illustrate the utility of the logging system. In addition, the progress of investigations into new parameters which can be derived with pulsed neutron logging data will be reported

Selective logging: do rates of forest turnover in stems, species composition and functional traits decrease with time since disturbance? – A 45 year perspective

Science.gov (United States)

Osazuwa-Peters, Oyomoare L.; Jiménez, Iván; Oberle, Brad; Chapman, Colin A.; Zanne, Amy E.

2015-01-01

Selective logging, the targeted harvesting of timber trees in a single cutting cycle, is globally rising in extent and intensity. Short-term impacts of selective logging on tropical forests have been widely investigated, but long-term effects on temporal dynamics of forest structure and composition are largely unknown. Understanding these long-term dynamics will help determine whether tropical forests are resilient to selective logging and inform choices between competing demands of anthropogenic use versus conservation of tropical forests. Forest dynamics can be studied within the framework of succession theory, which predicts that temporal turnover rates should decline with time since disturbance. Here, we investigated the temporal dynamics of a tropical forest in Kibale National Park, Uganda over 45 years following selective logging. We estimated turnover rates in stems, species composition, and functional traits (wood density and diameter at breast height), using observations from four censuses in 1989, 1999, 2006, and 2013, of stems ≥ 10 cm diameter within 17 unlogged and 9 logged 200 × 10 m vegetation plots. We used null models to account for interdependencies among turnover rates in stems, species composition, and functional traits. We tested predictions that turnover rates should be higher and decrease with increasing time since the selective logging event in logged forest, but should be less temporally variable in unlogged forest. Overall, we found higher turnover rates in logged forest for all three attributes, but turnover rates did not decline through time in logged forest and was not less temporally variable in unlogged forest. These results indicate that successional models that assume recovery to pre-disturbance conditions are inadequate for predicting the effects of selective logging on the dynamics of the tropical forest in Kibale. Selective logging resulted in persistently higher turnover rates, which may compromise the carbon storage capacity

The Kernel Mixture Network: A Nonparametric Method for Conditional Density Estimation of Continuous Random Variables

OpenAIRE

Ambrogioni, Luca; Güçlü, Umut; van Gerven, Marcel A. J.; Maris, Eric

2017-01-01

This paper introduces the kernel mixture network, a new method for nonparametric estimation of conditional probability densities using neural networks. We model arbitrarily complex conditional densities as linear combinations of a family of kernel functions centered at a subset of training points. The weights are determined by the outer layer of a deep neural network, trained by minimizing the negative log likelihood. This generalizes the popular quantized softmax approach, which can be seen ...

Target recognition of log-polar ladar range images using moment invariants

Science.gov (United States)

Xia, Wenze; Han, Shaokun; Cao, Jie; Yu, Haoyong

2017-01-01

The ladar range image has received considerable attentions in the automatic target recognition field. However, previous research does not cover target recognition using log-polar ladar range images. Therefore, we construct a target recognition system based on log-polar ladar range images in this paper. In this system combined moment invariants and backpropagation neural network are selected as shape descriptor and shape classifier, respectively. In order to fully analyze the effect of log-polar sampling pattern on recognition result, several comparative experiments based on simulated and real range images are carried out. Eventually, several important conclusions are drawn: (i) if combined moments are computed directly by log-polar range images, translation, rotation and scaling invariant properties of combined moments will be invalid (ii) when object is located in the center of field of view, recognition rate of log-polar range images is less sensitive to the changing of field of view (iii) as object position changes from center to edge of field of view, recognition performance of log-polar range images will decline dramatically (iv) log-polar range images has a better noise robustness than Cartesian range images. Finally, we give a suggestion that it is better to divide field of view into recognition area and searching area in the real application.

Ontology-driven extraction of event logs from relational databases

NARCIS (Netherlands)

Calvanese, Diego; Montali, Marco; Syamsiyah, Alifah; van der Aalst, Wil M P; Reichert, M.; Reijers, H.A.

2015-01-01

Process mining is an emerging discipline whose aim is to discover, monitor and improve real processes by extracting knowledge from event logs representing actual process executions in a given organizational setting. In this light, it can be applied only if faithful event logs, adhering to accepted

Impacts of airborne lidar pulse density on estimating biomass stocks and changes in a selectively logged tropical forest

Science.gov (United States)

Carlos Alberto Silva; Andrew Thomas Hudak; Lee Alexander Vierling; Carine Klauberg; Mariano Garcia; Antonio Ferraz; Michael Keller; Jan Eitel; Sassan Saatchi

2017-01-01

Airborne lidar has become a well-suited technology for predicting and mapping many tropical forest attributes, including aboveground biomass (AGB). However, trade-offs exist between lidar pulse density and acquisition cost. The aim of this study was to evaluate the influence of lidar pulse density on AGB change predictions using airborne lidar and field plot data in a...

CS model coil experimental log book

Energy Technology Data Exchange (ETDEWEB)

Nishijima, Gen; Sugimoto, Makoto; Nunoya, Yoshihiko; Wakabayashi, Hiroshi; Tsuji, Hiroshi [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

2001-02-01

Charging test of the ITER CS Model Coil which is the world's largest superconducting pulse coil and the CS Insert Coil had started at April 11, 2000 and had completed at August 18, 2000. In the campaign, total shot numbers were 356 and the size of the data file in the DAS (Data Acquisition System) was over 20 GB. This report is a database that consists of the log list and the log sheets of every shot. One can access the database, make a search, and browse results via Internet (http://1ogwww.naka.jaeri.go.jp). The database will be useful to quick search to choose necessary shots. (author)

Development of a digital log ratemeter

International Nuclear Information System (INIS)

Domienikan, Claudio; Brito, Andreia; Toledo, Fabio de; Zahn, Guilherme S.

2011-01-01

A compact log ratemeter that measures and displays an average count rate through a microcomputer is presented. This ratemeter was developed to be used to monitor a laboratory of production of radioactive samples and also for teaching purposes. The main features are log measurement range from .1 to 1.000 counts/sec and adjustable level alarm. The electronic circuit uses a Geiger tube LND7224, and the processed signal is applied to a National Instruments Multifunction I/O USB-6008 connected to a PC through USB input. A program developed in LabView allows storage of data and real-time observation of the rate of radiation evolution. This ratemeter was designed and constructed in the IPEN-CNEN/SP. (author)

Nível de Serviço Logístico, Estrutura Organizacional da Logística e Desempenho Empresarial: Associações e Contingenciadores

OpenAIRE

Vinicius de Souza Silva Oliveira, Marcus

2005-01-01

Atividades logísticas de grandes empresas industriais brasileiras é tema pouco explorado em pesquisas empíricas. Esta dissertação se propõe a analisar possíveis associações entre nível de serviço logístico, estrutura organizacional da logística e o desempenho empresarial das maiores indústrias do Brasil, bem como a influência de variáveis moderadoras (tipo de produto, controle de capital e tamanho da empresa) nas mencionadas associações. Para tal, são utilizados questionários respondidos por ...

Logs of Paleoseismic Excavations Across the Central Range Fault, Trinidad

Science.gov (United States)

Crosby, Christopher J.; Prentice, Carol S.; Weber, John; Ragona, Daniel

2009-01-01

This publication makes available maps and trench logs associated with studies of the Central Range Fault, part of the South American-Caribbean plate boundary in Trinidad. Our studies were conducted in 2001 and 2002. We mapped geomorphic features indicative of active faulting along the right-lateral, Central Range Fault, part of the South American-Caribbean plate boundary in Trinidad. We excavated trenches at two sites, the Samlalsingh and Tabaquite sites. At the Samlalsingh site, sediments deposited after the most recent fault movement bury the fault, and the exact location of the fault was unknown until we exposed it in our excavations. At this site, we excavated a total of eleven trenches, six of which exposed the fault. The trenches exposed fluvial sediments deposited over a strath terrace developed on Miocene bedrock units. We cleaned the walls of the excavations, gridded the walls with either 1 m X 1 m or 1 m X 0.5 m nail and string grid, and logged the walls in detail at a scale of 1:20. Additionally, we described the different sedimentary units in the field, incorporating these descriptions into our trench logs. We mapped the locations of the trenches using a tape and compass. Our field logs were scanned, and unit contacts were traced in Adobe Illustrator. The final drafted logs of all the trenches are presented here, along with photographs showing important relations among faults and Holocene sedimentary deposits. Logs of south walls were reversed in Illustrator, so that all logs are drafted with the view direction to the north. We collected samples of various materials exposed in the trench walls, including charcoal samples for radiocarbon dating from both faulted and unfaulted deposits. The locations of all samples collected are shown on the logs. The ages of seventeen of the charcoal samples submitted for radiocarbon analysis at the University of Arizona Accelerator Mass Spectrometry Laboratory in Tucson, Ariz., are given in Table 1. Samples found in

The Message Logging System for NOνA Experiment

International Nuclear Information System (INIS)

Lu Qiming; Kowalkowski, J B; Biery, K A

2011-01-01

The message logging system provides the infrastructure for all of the distributed processes in the data acquisition (DAQ) to report status messages of various severities in a consistent manner to a central location, as well as providing the tools for displaying and archiving the messages. The message logging system has been developed over a decade, and has been run successfully on CDF and CMS experiments. The most recent work to the message logging system is to build it as a stand-alone package with the name MessageFacility which works for any generic framework or applications, with NOνA as the first driving user. System designs and architectures, as well as the efforts of making it a generic library will be discussed. We also present new features that have been added.

Unified electronic unit for miniature radioactivity logging equipment

International Nuclear Information System (INIS)

Bragin, A.A.; Goldshtejn, L.M.; Fedorov, R.F.; Shikhman, A.S.

1981-01-01

Appropriateness and urgency of the unification of components of radioactivity logging equipment used for the investigation of wells at solid mineral deposits is substantiated. A two-channel electronic unit for miniature equipment for radioactivity logging is described and its basic specifications and performance are given. All functional assemblies of the unit are structurally made in the form of printed circuit boards placed in a pan-shaped chassis 28 mm in diameter. The unit's general design provides for the possibility to attach two probes with detection devices to the unit. The unit is used in the two-channel radioactivity logging instrument ''Kura-2'' and in the two-channel radiometer ''RUR-2''. The outer diameter of these instruments is 48 mm and they ensure the investigation of ore and coal wells with a combination radioactivity methods [ru

Carbon emissions from tropical forest degradation caused by logging

International Nuclear Information System (INIS)

Pearson, Timothy R H; Brown, Sandra; Casarim, Felipe M

2014-01-01

The focus of land-use related efforts in developing countries to reduce carbon emissions has been on slowing deforestation, yet international agreements are to reduce emissions from both deforestation and forest degradation (REDD). The second ‘D’ is poorly understood and accounted for a number of technical and policy reasons. Here we introduce a complete accounting method for estimating emission factors from selective timber harvesting, a substantial form of forest degradation in many tropical developing countries. The method accounts separately for emissions from the extracted log, from incidental damage to the surrounding forest, and from logging infrastructure, and emissions are expressed as units of carbon per cubic meter of timber extracted to allow for simple application to timber harvesting statistics. We applied the method in six tropical countries (Belize, Bolivia, Brazil, Guyana, Indonesia, and Republic of Congo), resulting in total emission factors of 0.99−2.33 Mg C m −3 . In all cases, emissions were dominated by damage to surrounding vegetation and the infrastructure rather than the logs themselves, and total emissions represented about 3–15% of the biomass carbon stocks of the associated unlogged forests. We then combined the emission factors with country level logging statistics for nine key timber producing countries represented by our study areas to gain an understanding of the order of magnitude of emissions from degradation compared to those recently reported for deforestation in the same countries. For the nine countries included, emissions from logging were on average equivalent to about 12% of those from deforestation. For those nine countries with relatively low emissions from deforestation, emissions from logging were equivalent to half or more of those from deforestation, whereas for those countries with the highest emissions from deforestation, emissions from logging were equivalent to <10% of those from deforestation

Tangential scanning of hardwood logs: developing an industrial computer tomography scanner

Science.gov (United States)

Nand K. Gupta; Daniel L. Schmoldt; Bruce Isaacson

1999-01-01

It is generally believed that noninvasive scanning of hardwood logs such as computer tomography (CT) scanning prior to initial breakdown will greatly improve the processing of logs into lumber. This belief, however, has not translated into rapid development and widespread installation of industrial CT scanners for log processing. The roadblock has been more operational...

Plataforma logística de Leixões

OpenAIRE

Pereira, Judite Filomena Soares

2014-01-01

Dissertação apresentada ao Instituto Politécnico do Porto para obtenção do Grau de Mestre em Logística Orientador: Prof. Doutor José António Baptista da Costa Coorientador: Engenheiro Artur Machado de Campos Rangel Nota: 16 valores O fenómeno da globalização nas economias contribui para as grandes alterações que se verificam nas redes e nas soluções de transporte e de abastecimento tornando-se assim cada vez mais importante o transporte integrado num conceito de Logística. ...

Geophysical borehole logging test procedure: Final draft

International Nuclear Information System (INIS)

1986-09-01

The purpose of geophysical borehole logging from the At-Depth Facility (ADF) is to provide information which will assist in characterizing the site geologic conditions and in classifying the engineering characteristics of the rock mass in the vicinity of the ADF. The direct goals of borehole logging include identification of lithologic units and their correlation from hole to hole, identification of fractured or otherwise porous or permeable zones, quantitative or semi-quantitative estimation of various formation properties, and evaluation of factors such as the borehole diameter and orientation. 11 figs., 4 tabs

Automatic Data Logging and Quality Analysis System for Mobile Devices

Directory of Open Access Journals (Sweden)

Yong-Yi Fanjiang

2017-01-01

Full Text Available The testing phase of mobile device products includes two important test projects that must be completed before shipment: the field trial and the beta user trial. During the field trial, the product is certified based on its integration and stability with the local operator’s system, and, during the beta user trial, the product is certified by multiple users regarding its daily use, where the goal is to detect and solve early problems. In the traditional approach used to issue returns, testers must log into a web site, fill out a problem form, and then go through a browser or FTP to upload logs; however, this is inconvenient, and problems are reported slowly. Therefore, we propose an “automatic logging analysis system” (ALAS to construct a convenient test environment and, using a record analysis (log parser program, automate the parsing of log files and have questions automatically sent to the database by the system. Finally, the mean time between failures (MTBF is used to establish measurement indicators for the beta user trial.

Detection of defects in logs using computer assisted tomography (CAT) scanning

International Nuclear Information System (INIS)

Tonner, P.D.; Lupton, L.R.

1985-01-01

The Chalk River Nuclear Laboratories of AECL have performed a preliminary feasibility study on the applicability of computer assisted tomographic techniques to detect the internal structure of logs. Cross sections of three logs have been obtained using a medical CAT scanner. The results show that knots, rot and growth rings are easily recognized in both dry and wet logs

Effects of post-fire logging on California spotted owl occupancy

Directory of Open Access Journals (Sweden)

Chad T. Hanson

2018-01-01

Full Text Available In fire-adapted forest ecosystems around the world, there has been growing concern about adverse impacts of post-fire logging on native biodiversity and ecological processes. This is also true in conifer forests of California, U.S.A. which are home to a rare and declining owl subspecies, the California spotted owl (Strix occidentalis occidentalis. While there has been recent concern about the California spotted owl occupancy in large fire areas where some territories have substantial high-severity fire effects, the influence of post-fire logging on the California spotted owl occupancy has been investigated very little, leading to some uncertainty about interpretation of conflicting results in different large fires. Research has found these owls preferentially select high-severity fire areas, characterised by high levels of snags and native shrubs, for foraging in forests that were not logged after fire, suggesting that removal of this foraging habitat might impact occupancy. The authors assessed the effect of post-fire logging and high-severity fire, on occupancy of this subspecies in eight large fire areas, within spotted owl sites with two different levels of high-severity fire effects. They found a significant adverse effect of such logging and no effect of high-severity fire alone. These results indicate it is post-fire logging, not large fires themselves, that poses a conservation threat to this imperilled species.

Logging disturbance shifts net primary productivity and its allocation in Bornean tropical forests.

Science.gov (United States)

Riutta, Terhi; Malhi, Yadvinder; Kho, Lip Khoon; Marthews, Toby R; Huaraca Huasco, Walter; Khoo, MinSheng; Tan, Sylvester; Turner, Edgar; Reynolds, Glen; Both, Sabine; Burslem, David F R P; Teh, Yit Arn; Vairappan, Charles S; Majalap, Noreen; Ewers, Robert M

2018-01-24

Tropical forests play a major role in the carbon cycle of the terrestrial biosphere. Recent field studies have provided detailed descriptions of the carbon cycle of mature tropical forests, but logged or secondary forests have received much less attention. Here, we report the first measures of total net primary productivity (NPP) and its allocation along a disturbance gradient from old-growth forests to moderately and heavily logged forests in Malaysian Borneo. We measured the main NPP components (woody, fine root and canopy NPP) in old-growth (n = 6) and logged (n = 5) 1 ha forest plots. Overall, the total NPP did not differ between old-growth and logged forest (13.5 ± 0.5 and 15.7 ± 1.5 Mg C ha -1  year -1 respectively). However, logged forests allocated significantly higher fraction into woody NPP at the expense of the canopy NPP (42% and 48% into woody and canopy NPP, respectively, in old-growth forest vs 66% and 23% in logged forest). When controlling for local stand structure, NPP in logged forest stands was 41% higher, and woody NPP was 150% higher than in old-growth stands with similar basal area, but this was offset by structure effects (higher gap frequency and absence of large trees in logged forest). This pattern was not driven by species turnover: the average woody NPP of all species groups within logged forest (pioneers, nonpioneers, species unique to logged plots and species shared with old-growth plots) was similar. Hence, below a threshold of very heavy disturbance, logged forests can exhibit higher NPP and higher allocation to wood; such shifts in carbon cycling persist for decades after the logging event. Given that the majority of tropical forest biome has experienced some degree of logging, our results demonstrate that logging can cause substantial shifts in carbon production and allocation in tropical forests. © 2018 John Wiley & Sons Ltd.

Data logging and online reconstruction in H1

International Nuclear Information System (INIS)

Fuhrmann, P.; Gerhards, R.; Kruener-Marquis, U.; Olsson, J.E.; Szkutnik, Z.

1994-01-01

In spring 1992, the H1 detector at the HERA electron proton collider at DESY came into operation. The high bunch crossing rate and, correspondingly, the large data volumes are placing demanding requirements on the data logging and event reconstruction. Both tasks are performed on an SGI Challenge series computer. This note reviews the development and the experience with the data logging and online reconstruction in H1

Logística Reversa aplicada em um Supermercado de Pequeno Porte

OpenAIRE

Servilha, André Marcon; Santos, Fernando Almeida

2012-01-01

Este trabalho tem como objetivo dissertar sobre logística reversa e a sua importância no mundo globalizado. Posteriormente, é dissertado sobre a relação da logística reversa com o meio ambiente e com a logística verde. Ao final, apresenta-se um estudo de caso, que descreve o processo de logística reversa em um supermercado de pequeno porte situado em um bairro periférico da cidade de São Paulo, abordando os benefícios e resultados obtidos pela empresa abordada. Trata-se de uma pesquisa descri...

Log-based identification of sweet spots for effective fracs in shale reservoirs

Energy Technology Data Exchange (ETDEWEB)

Hashmy, K.; Barnett, C.; Jonkers, J. [Weatherford (United States); Abueita, S. [Anadarko Petroleum (United States)

2011-07-01

Shale reservoir exploitation requires horizontal hydro-fracturing, often in a multi-stage configuration. Fracture stages are usually evenly spaced along the horizontal well, regardless of reservoir characteristics, even though wireline logs or logging-while-drilling (LWD) methods could be used to determine sweet spots for more cost-effective fracturing locations. This paper aims to show how failure to take into consideration a reservoir's geological properties can lead to less effective exploitation, and then goes on to describe logging techniques, LWD and wireline logs combined, and their usefulness in effectively placing fracturing stages on a reservoir's sweet spots. By studying logs from different LWD and wireline log techniques, such as gamma ray, resistivity, X-ray fluorescence or shockwave sonic measurements for different existing wells, the study shows how sweet spots, where kerogen concentration is higher, with higher porosity, can be determined. These logging techniques, requiring low investments, offer a variety of methods for identifying sweet spots in shale reservoirs, and fracturing only these spots will avoid unnecessary expenditure on frac stages in zones with poor reservoir characteristics.

21 CFR 211.182 - Equipment cleaning and use log.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment cleaning and use log. 211.182 Section 211.182 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Reports § 211.182 Equipment cleaning and use log. A written record of major equipment cleaning...

Drilling and logging in uranium exploration

International Nuclear Information System (INIS)

Anon.

1976-01-01

The report reviews drilling and logging practices in exploration of uranium ores and summarizes the papers presented in the panel meeting. Recommendations for further research and development are given

Reconciling the Log-Linear and Non-Log-Linear Nature of the TSH-Free T4 Relationship: Intra-Individual Analysis of a Large Population.

Science.gov (United States)

Rothacker, Karen M; Brown, Suzanne J; Hadlow, Narelle C; Wardrop, Robert; Walsh, John P

2016-03-01

The TSH-T4 relationship was thought to be inverse log-linear, but recent cross-sectional studies report a complex, nonlinear relationship; large, intra-individual studies are lacking. Our objective was to analyze the TSH-free T4 relationship within individuals. We analyzed data from 13 379 patients, each with six or more TSH/free T4 measurements and at least a 5-fold difference between individual median TSH and minimum or maximum TSH. Linear and nonlinear regression models of log TSH on free T4 were fitted to data from individuals and goodness of fit compared by likelihood ratio testing. Comparing all models, the linear model achieved best fit in 31% of individuals, followed by quartic (27%), cubic (15%), null (12%), and quadratic (11%) models. After eliminating least favored models (with individuals reassigned to best fitting, available models), the linear model fit best in 42% of participants, quartic in 43%, and null model in 15%. As the number of observations per individual increased, so did the proportion of individuals in whom the linear model achieved best fit, to 66% in those with more than 20 observations. When linear models were applied to all individuals and averaged according to individual median free T4 values, variations in slope and intercept indicated a nonlinear log TSH-free T4 relationship across the population. The log TSH-free T4 relationship appears linear in some individuals and nonlinear in others, but is predominantly linear in those with the largest number of observations. A log-linear relationship within individuals can be reconciled with a non-log-linear relationship in a population.

Reliable single chip genotyping with semi-parametric log-concave mixtures.

Directory of Open Access Journals (Sweden)

Ralph C A Rippe

Full Text Available The common approach to SNP genotyping is to use (model-based clustering per individual SNP, on a set of arrays. Genotyping all SNPs on a single array is much more attractive, in terms of flexibility, stability and applicability, when developing new chips. A new semi-parametric method, named SCALA, is proposed. It is based on a mixture model using semi-parametric log-concave densities. Instead of using the raw data, the mixture is fitted on a two-dimensional histogram, thereby making computation time almost independent of the number of SNPs. Furthermore, the algorithm is effective in low-MAF situations.Comparisons between SCALA and CRLMM on HapMap genotypes show very reliable calling of single arrays. Some heterozygous genotypes from HapMap are called homozygous by SCALA and to lesser extent by CRLMM too. Furthermore, HapMap's NoCalls (NN could be genotyped by SCALA, mostly with high probability. The software is available as R scripts from the website www.math.leidenuniv.nl/~rrippe.

A selective logging mechanism for hardware transactional memory systems

OpenAIRE

Lupon Navazo, Marc; Magklis, Grigorios; González Colás, Antonio María

2011-01-01

Log-based Hardware Transactional Memory (HTM) systems offer an elegant solution to handle speculative data that overflow transactional L1 caches. By keeping the pre-transactional values on a software-resident log, speculative values can be safely moved across the memory hierarchy, without requiring expensive searches on L1 misses or commits.

Shiitake mushroom production on small diameter oak logs in Ohio

Science.gov (United States)

S.M. Bratkovich

1991-01-01

Yields of different strains of shiitake mushrooms (Lentinus edodes) were evaluated when produced on small diameter oak logs in Ohio. Logs averaging between 3-4 inches in diameter were inoculated with four spawn strains in 1985.

Permeability Estimation Directly From Logging-While-Drilling Induced Polarization Data

DEFF Research Database (Denmark)

Fiandaca, G.; Maurya, P.K.; Balbarini, Nicola

2018-01-01

In this study we present the prediction of permeability from time‐domain spectral induced polarization (IP) data, measured in boreholes on undisturbed formations using the El‐log logging‐while‐drilling technique. We collected El‐log data and hydraulic properties on unconsolidated Quaternary...... and Miocene deposits in boreholes at three locations at a field site in Denmark, characterized by different electrical water conductivity and chemistry. The high vertical resolution of the El‐log technique matches the lithological variability at the site, minimizing ambiguity in the interpretation originating...

Application of computer data processing of well logging in Azerbaijan

International Nuclear Information System (INIS)

Vorob'ev, Yu.A.; Shilov, G.Ya.; Samedova, A.S.

1989-01-01

Transition from the mannal quantitative interpretation of materials of well-logging study (WLS) to application of computer in production association (PA) Azneftegeologiya is described. WLS materials were processed manually in PA till 1986. Later on interpretation was conducted with the use of computer in order to determine clayiness, porosity, oil and gas saturation, fluid of strata. Examples of presentation of results of computer interpretation of WLS data (including gamma-logging and neutron-gamma-logging) for determining porosity and oil saturation of sandy mudrocks are given

Modeling and validating the grabbing forces of hydraulic log grapples used in forest operations

Science.gov (United States)

Jingxin Wang; Chris B. LeDoux; Lihai Wang

2003-01-01

The grabbing forces of log grapples were modeled and analyzed mathematically under operating conditions when grabbing logs from compact log piles and from bunch-like log piles. The grabbing forces are closely related to the structural parameters of the grapple, the weight of the grapple, and the weight of the log grabbed. An operational model grapple was designed and...

High throughput nonparametric probability density estimation.

Science.gov (United States)

Farmer, Jenny; Jacobs, Donald

2018-01-01

In high throughput applications, such as those found in bioinformatics and finance, it is important to determine accurate probability distribution functions despite only minimal information about data characteristics, and without using human subjectivity. Such an automated process for univariate data is implemented to achieve this goal by merging the maximum entropy method with single order statistics and maximum likelihood. The only required properties of the random variables are that they are continuous and that they are, or can be approximated as, independent and identically distributed. A quasi-log-likelihood function based on single order statistics for sampled uniform random data is used to empirically construct a sample size invariant universal scoring function. Then a probability density estimate is determined by iteratively improving trial cumulative distribution functions, where better estimates are quantified by the scoring function that identifies atypical fluctuations. This criterion resists under and over fitting data as an alternative to employing the Bayesian or Akaike information criterion. Multiple estimates for the probability density reflect uncertainties due to statistical fluctuations in random samples. Scaled quantile residual plots are also introduced as an effective diagnostic to visualize the quality of the estimated probability densities. Benchmark tests show that estimates for the probability density function (PDF) converge to the true PDF as sample size increases on particularly difficult test probability densities that include cases with discontinuities, multi-resolution scales, heavy tails, and singularities. These results indicate the method has general applicability for high throughput statistical inference.

Nest densities of cavity-nesting birds in relation to postfire salvage logging and time since wildfire

Science.gov (United States)

Victoria A. Saab; Robin E. Russell; Jonathan G. Dudley

2007-01-01

We monitored the nest densities and nest survival of seven cavity-nesting bird species, including four open-space foragers (American Kestrel [Falco sparverius], Lewis's Woodpecker [Melanerpes lewis], Western Bluebird [Sialia mexicana], and Mountain Bluebird [S. currucoides]) and three wood...

Lithostratigraphy from downhole logs in Hole AND-1B, Antarctica

Science.gov (United States)

Williams, Trevor; Morin, Roger H.; Jarrard, Richard D.; Jackolski, Chris L.; Henrys, Stuart A.; Niessen, Frank; Magens, Diana; Kuhn, Gerhard; Monien, Donata; Powell, Ross D.

2012-01-01

The ANDRILL (Antarctic Drilling Project) McMurdo Ice Shelf (MIS) project drilled 1285 m of sediment in Hole AND–1B, representing the past 12 m.y. of glacial history. Downhole geophysical logs were acquired to a depth of 1018 mbsf (meters below seafloor), and are complementary to data acquired from the core. The natural gamma radiation (NGR) and magnetic susceptibility logs are particularly useful for understanding lithological and paleoenvironmental change at ANDRILL McMurdo Ice Shelf Hole AND–1B. NGR logs cover the entire interval from the seafloor to 1018 mbsf, and magnetic susceptibility and other logs covered the open hole intervals between 692 and 1018 and 237–342 mbsf. In the upper part of AND–1B, clear alternations between low and high NGR values distinguish between diatomite (lacking minerals containing naturally radioactive K, U, and Th) and diamictite (containing K-bearing clays, K-feldspar, mica, and heavy minerals). In the lower open hole logged section, NGR and magnetic susceptibility can also distinguish claystones (rich in K-bearing clay minerals, relatively low in magnetite) and diamictites (relatively high in magnetite). Sandstones can be distinguished by their high resistivity values in AND–1B. On the basis of these three downhole logs, diamictite, claystones, and sandstones can be predicted correctly for 74% of the 692–1018 mbsf interval. The logs were then used to predict facies for the 6% of this interval that was unrecovered by coring. Given the understanding of the physical property characteristics of different facies, it is also possible to identify subtle changes in lithology from the physical properties and help refine parts of the lithostratigraphy, for example, the varying terrigenous content of diatomites and the transitions from subice diamictite to open-water diatomite.

Non conventional empirical relations for estimating compressional-wave sonic logs; Relacoes empiricas nao-convencionais para estimativa de perfis sonicos de ondas compressionais

Energy Technology Data Exchange (ETDEWEB)

Augusto, Fabricio de O.A. [Observatorio Nacional (ON), Rio de Janeiro, RJ (Brazil). Curso de Pos-graduacao em Geofisica; Martins, Jorge L. [Observatorio Nacional (ON), Rio de Janeiro, RJ (Brazil). Coordenacao da Area de Geofisica

2008-07-01

We apply least-squares regression using non-conventional empirical relations for estimating compressional-wave sonic logs (DTP). We investigate the applicability of five expressions which involve exponential functions, with arguments representing effective porosity ({phi}e) estimated from density logs, shaliness (V{sub clay}) estimated from gamma-ray logs (GR) and electrical resistivity (R{sub ILD}) measured by the deep-induction logging tool (ILD). First, we use such physical properties individually, i.e., as the dependence parameter of compressional-wave velocities (V{sub P}), in the argument of the exponential function; then, we combine some of these properties in order to simulate the known interdependency among them. In order to test our methodology, we adopt two vertical wells - hereafter named Poco-A and Poco-B - from 'Campo Escola Namorado', with information of all geophysical well logs necessary to our study in the turbiditic interval from 2950 e 3150 m. In Poco-A, the best fit obtained through least squares for compressional-wave velocities was V{sub P} = 4.657 exp[.1.488 {phi}e - 0.986 V{sub clay} + 5.022 {phi}e V{sub clay} ], with correlation coefficient r = 0.81; in Poco-B, we found V{sub P} 4.209 exp[- 0.658 {phi}e - 0.430 V{sub clay} + 6.620 x 10.4 R{sub ILD} - 0.035 {phi}e V{sub clay} R{sub ILD}], with correlation coefficient r = 0.52. These two non-conventional empirical models take into account the effects of the interdependence between effective porosity, shaliness and electrical resistivity of the rock on Vp (i.e., they incorporate non-linear effects), becoming alternative models for predicting the sonic logs that are incomplete and/or absent in the data set 'Campo Escola Namorado'. (author)

Mining Experiential Patterns from Game-Logs of Board Game

Directory of Open Access Journals (Sweden)

Liang Wang

2015-01-01

Full Text Available In board games, game-logs record past game processes, which can be regarded as an accumulation of experience. Similar to a real person, a computer player can gradually increase its skill by learning from game-logs. Therefore, the game becomes more interesting. This paper proposes an extensible approach to mine experiential patterns from increasing game-logs. The computer player improves its strategies by utilizing these growing patterns, just as it acquires experience. To evaluate the effect and performance of the approach, we designed a sample board game as a test platform and elaborated an experiment consisting of a series of tests. Experimental results show that our approach is effective and efficient.

Preliminary report on NTS spectral gamma logging and calibration models

International Nuclear Information System (INIS)

Mathews, M.A.; Warren, R.G.; Garcia, S.R.; Lavelle, M.J.

1985-01-01

Facilities are now available at the Nevada Test Site (NTS) in Building 2201 to calibrate spectral gamma logging equipment in environments of low radioactivity. Such environments are routinely encountered during logging of holes at the NTS. Four calibration models were delivered to Building 2201 in January 1985. Each model, or test pit, consists of a stone block with a 12-inch diameter cored borehole. Preliminary radioelement values from the core for the test pits range from 0.58 to 3.83% potassium (K), 0.48 to 29.11 ppm thorium (Th), and 0.62 to 40.42 ppm uranium (U). Two satellite holes, U19ab number2 and U19ab number3, were logged during the winter of 1984-1985. The response of these logs correlates with contents of the naturally radioactive elements K. Th. and U determined in samples from petrologic zones that occur within these holes. Based on these comparisons, the spectral gamma log aids in the recognition and mapping of subsurface stratigraphic units and alteration features associated with unusual concentration of these radioactive elements, such as clay-rich zones

Life cycle performances of log wood applied for soil bioengineering constructions

Science.gov (United States)

Kalny, Gerda; Strauss-Sieberth, Alexandra; Strauss, Alfred; Rauch, Hans Peter

2016-04-01

Nowadays there is a high demand on engineering solutions considering not only technical aspects but also ecological and aesthetic values. Soil bioengineering is a construction technique that uses biological components for hydraulic and civil engineering solutions. Soil bioengineering solutions are based on the application of living plants and other auxiliary materials including among others log wood. This kind of construction material supports the soil bioengineering system as long as the plants as living construction material overtake the stability function. Therefore it is important to know about the durability and the degradation process of the wooden logs to retain the integral performance of a soil bio engineering system. These aspects will be considered within the framework of the interdisciplinary research project „ELWIRA Plants, wood, steel and concrete - life cycle performances as construction materials". Therefore field investigations on soil bioengineering construction material, specifically European Larch wood logs, of different soil bioengineering structures at the river Wien have been conducted. The drilling resistance as a parameter for particular material characteristics of selected logs was measured and analysed. The drilling resistance was measured with a Rinntech Resistograph instrument at different positions of the wooden logs, all surrounded with three different backfills: Fully surrounded with air, with earth contact on one side and near the water surface in wet-dry conditions. The age of the used logs ranges from one year old up to 20 year old. Results show progress of the drilling resistance throughout the whole cross section as an indicator to assess soil bioengineering construction material. Logs surrounded by air showed a higher drilling resistance than logs with earth contact and the ones exposed to wet-dry conditions. Hence the functional capability of wooden logs were analysed and discussed in terms of different levels of degradation

Regional well-log correlation in the New Mexico portion of the Delaware Basin

International Nuclear Information System (INIS)

Borns, D.J.; Shaffer, S.E.

1985-09-01

Although well logs provide the most complete record of stratigraphy and structure in the northern Delaware Basin, regional interpretations of these logs generate problems of ambiguous lithologic signatures and on-hole anomalies. Interpretation must therefore be based on log-to-log correlation rather than on inferences from single logs. In this report, logs from 276 wells were used to make stratigraphic picks of Ochoan horizons (the Rustler, Salado, and Castile Formations) in the New Mexico portion of the Delaware Basin. Current log correlation suggests that: (1) the Castile is characterized by lateral thickening and thinning; (2) some Castile thinnings are of Permian age; (3) irregular topography in the Guadalupian Bell Canyon Formation may produce apparent structures in the overlying Ochoan units; and (4) extensive dissolution of the Salado is not apparent in the area of the Waste Isolation Pilot Project (WIPP) site. 13 refs., 37 figs

ECLogger: Cross-Project Catch-Block Logging Prediction Using Ensemble of Classifiers

Directory of Open Access Journals (Sweden)

Sangeeta Lal

2017-01-01

Full Text Available Background: Software developers insert log statements in the source code to record program execution information. However, optimizing the number of log statements in the source code is challenging. Machine learning based within-project logging prediction tools, proposed in previous studies, may not be suitable for new or small software projects. For such software projects, we can use cross-project logging prediction. Aim: The aim of the study presented here is to investigate cross-project logging prediction methods and techniques. Method: The proposed method is ECLogger, which is a novel, ensemble-based, cross-project, catch-block logging prediction model. In the research We use 9 base classifiers were used and combined using ensemble techniques. The performance of ECLogger was evaluated on on three open-source Java projects: Tomcat, CloudStack and Hadoop. Results: ECLogger Bagging, ECLogger AverageVote, and ECLogger MajorityVote show a considerable improvement in the average Logged F-measure (LF on 3, 5, and 4 source -> target project pairs, respectively, compared to the baseline classifiers. ECLogger AverageVote performs best and shows improvements of 3.12% (average LF and 6.08% (average ACC – Accuracy. Conclusion: The classifier based on ensemble techniques, such as bagging, average vote, and majority vote outperforms the baseline classifier. Overall, the ECLogger AverageVote model performs best. The results show that the CloudStack project is more generalizable than the other projects.

Sistema para la gestión logística empresarial

OpenAIRE

Carlos Alberto González Camargo

2014-01-01

El contenido de este trabajo presenta la metodología, el diseño y los resultados de la implementación de un sistema de gestión logística que sirve de soporte para la toma de decisiones relacionadas con la administración de la cadena de abastecimiento. El primer paso para su elaboración fue revisar la literatura existente relativa a los indicadores de aprovisionamiento, almacenamiento, distribución, servicio al cliente, logística inversa, responsabilidad social empresarial y costos logísticos;...