Density functional theory and multiscale materials modeling
Swapan K Ghosh
2003-01-01
One of the vital ingredients in the theoretical tools useful in materials modeling at all the length scales of interest is the concept of density. In the microscopic length scale, it is the electron density that has played a major role in providing a deeper understanding of chemical binding in atoms, molecules and solids. In the intermediate mesoscopic length scale, an appropriate picture of the equilibrium and dynamical processes has been obtained through the single particle number density of the constituent atoms or molecules. A wide class of problems involving nanomaterials, interfacial science and soft condensed matter has been addressed using the density based theoretical formalism as well as atomistic simulation in this regime. In the macroscopic length scale, however, matter is usually treated as a continuous medium and a description using local mass density, energy density and other related density functions has been found to be quite appropriate. A unique single unified theoretical framework that emerges through the density concept at these diverse length scales and is applicable to both quantum and classical systems is the so called density functional theory (DFT) which essentially provides a vehicle to project the many-particle picture to a single particle one. Thus, the central equation for quantum DFT is a one-particle Schrödinger-like Kohn–Sham equation, while the same for classical DFT consists of Boltzmann type distributions, both corresponding to a system of noninteracting particles in the field of a density-dependent effective potential. Selected illustrative applications of quantum DFT to microscopic modeling of intermolecular interaction and that of classical DFT to a mesoscopic modeling of soft condensed matter systems are presented.
Exact Maps in Density Functional Theory for Lattice Models
Dimitrov, Tanja; Fuks, Johanna I; Rubio, Angel
2015-01-01
In the present work, we employ exact diagonalization for model systems on a real-space lattice to explicitly construct the exact density-to-potential and for the first time the exact density-to-wavefunction map that underly the Hohenberg-Kohn theorem in density functional theory. Having the explicit wavefunction-to- density map at hand, we are able to construct arbitrary observables as functionals of the ground-state density. We analyze the density-to-potential map as the distance between the fragments of a system increases and the correlation in the system grows. We observe a feature that gradually develops in the density-to-potential map as well as in the density-to-wavefunction map. This feature is inherited by arbitrary expectation values as functional of the ground-state density. We explicitly show the excited-state energies, the excited-state densities, and the correlation entropy as functionals of the ground-state density. All of them show this exact feature that sharpens as the coupling of the fragmen...
A Joint Density Function in the Renewal Risk Model
XU HUAI; TANG LING; Wang De-hui
2013-01-01
In this paper,we consider a general expression for (Φ)(u,x,y),the joint density function of the surplus prior to ruin and the deficit at ruin when the initial surplus is u.In the renewal risk model,this density function is expressed in terms of the corresponding density function when the initial surplus is 0.In the compound Poisson risk process with phase-type claim size,we derive an explicit expression for (Φ)(u,x,y).Finally,we give a numerical example to illustrate the application of these results.
Density Functional Theory and Materials Modeling at Atomistic Length Scales
Swapan K. Ghosh
2002-04-01
Full Text Available Abstract: We discuss the basic concepts of density functional theory (DFT as applied to materials modeling in the microscopic, mesoscopic and macroscopic length scales. The picture that emerges is that of a single unified framework for the study of both quantum and classical systems. While for quantum DFT, the central equation is a one-particle Schrodinger-like Kohn-Sham equation, the classical DFT consists of Boltzmann type distributions, both corresponding to a system of noninteracting particles in the field of a density-dependent effective potential, the exact functional form of which is unknown. One therefore approximates the exchange-correlation potential for quantum systems and the excess free energy density functional or the direct correlation functions for classical systems. Illustrative applications of quantum DFT to microscopic modeling of molecular interaction and that of classical DFT to a mesoscopic modeling of soft condensed matter systems are highlighted.
Sloppy nuclear energy density functionals: effective model reduction
Niksic, Tamara
2016-01-01
Concepts from information geometry are used to analyse parameter sensitivity for a nuclear energy density functional, representative of a class of semi-empirical functionals that start from a microscopically motivated ansatz for the density dependence of the energy of a system of protons and neutrons. It is shown that such functionals are sloppy, characterized by an exponential range of sensitivity to parameter variations. Responsive to only a few stiff parameter combinations, they exhibit an exponential decrease of sensitivity to variations of the remaining soft parameters. By interpreting the space of model predictions as a manifold embedded in the data space, with the parameters of the functional as coordinates on the manifold, it is also shown that the exponential distribution of model manifold widths corresponds to the distribution of parameter sensitivity. Using the Manifold Boundary Approximation Method, we illustrate how to systematically construct effective nuclear density functionals of successively...
Exact maps in density functional theory for lattice models
Dimitrov, Tanja; Appel, Heiko; Fuks, Johanna I.; Rubio, Angel
2016-08-01
In the present work, we employ exact diagonalization for model systems on a real-space lattice to explicitly construct the exact density-to-potential and graphically illustrate the complete exact density-to-wavefunction map that underly the Hohenberg-Kohn theorem in density functional theory. Having the explicit wavefunction-to-density map at hand, we are able to construct arbitrary observables as functionals of the ground-state density. We analyze the density-to-potential map as the distance between the fragments of a system increases and the correlation in the system grows. We observe a feature that gradually develops in the density-to-potential map as well as in the density-to-wavefunction map. This feature is inherited by arbitrary expectation values as functional of the ground-state density. We explicitly show the excited-state energies, the excited-state densities, and the correlation entropy as functionals of the ground-state density. All of them show this exact feature that sharpens as the coupling of the fragments decreases and the correlation grows. We denominate this feature as intra-system steepening and discuss how it relates to the well-known inter-system derivative discontinuity. The inter-system derivative discontinuity is an exact concept for coupled subsystems with degenerate ground state. However, the coupling between subsystems as in charge transfer processes can lift the degeneracy. An important conclusion is that for such systems with a near-degenerate ground state, the corresponding cut along the particle number N of the exact density functionals is differentiable with a well-defined gradient near integer particle number.
Density functionals and dimensional renormalization for an exactly solvable model
Kais, S.; Herschbach, D. R.; Handy, N. C.; Murray, C. W.; Laming, G. J.
1993-07-01
We treat an analytically solvable version of the ``Hooke's Law'' model for a two-electron atom, in which the electron-electron repulsion is Coulombic but the electron-nucleus attraction is replaced by a harmonic oscillator potential. Exact expressions are obtained for the ground-state wave function and electron density, the Hartree-Fock solution, the correlation energy, the Kohn-Sham orbital, and, by inversion, the exchange and correlation functionals. These functionals pertain to the ``intermediate'' density regime (rs≥1.4) for an electron gas. As a test of customary approximations employed in density functional theory, we compare our exact density, exchange, and correlation potentials and energies with results from two approximations. These use Becke's exchange functional and either the Lee-Yang-Parr or the Perdew correlation functional. Both approximations yield rather good results for the density and the exchange and correlation energies, but both deviate markedly from the exact exchange and correlation potentials. We also compare properties of the Hooke's Law model with those of two-electron atoms, including the large dimension limit. A renormalization procedure applied to this very simple limit yields correlation energies as good as those obtained from the approximate functionals, for both the model and actual atoms.
Probability density function modeling for sub-powered interconnects
Pater, Flavius; Amaricǎi, Alexandru
2016-06-01
This paper proposes three mathematical models for reliability probability density function modeling the interconnect supplied at sub-threshold voltages: spline curve approximations, Gaussian models,and sine interpolation. The proposed analysis aims at determining the most appropriate fitting for the switching delay - probability of correct switching for sub-powered interconnects. We compare the three mathematical models with the Monte-Carlo simulations of interconnects for 45 nm CMOS technology supplied at 0.25V.
Nonequilibrium Anderson model made simple with density functional theory
Kurth, S.; Stefanucci, G.
2016-12-01
The single-impurity Anderson model is studied within the i-DFT framework, a recently proposed extension of density functional theory (DFT) for the description of electron transport in the steady state. i-DFT is designed to give both the steady current and density at the impurity, and it requires the knowledge of the exchange-correlation (xc) bias and on-site potential (gate). In this work we construct an approximation for both quantities which is accurate in a wide range of temperatures, gates, and biases, thus providing a simple and unifying framework to calculate the differential conductance at negligible computational cost in different regimes. Our results mark a substantial advance for DFT and may inform the construction of functionals applicable to other correlated systems.
Bioinorganic Chemistry Modeled with the TPSSh Density Functional
Kepp, Kasper Planeta
2008-01-01
In this work, the TPSSh density functional has been benchmarked against a test set of experimental structures and bond energies for 80 transition-metal-containing diatomics. It is found that the TPSSh functional gives structures of the same quality as other commonly used hybrid and nonhybrid func...... promising density functional for use and further development within the field of bioinorganic chemistry....
Dynamic density functional theory of solid tumor growth: Preliminary models
Arnaud Chauviere
2012-03-01
Full Text Available Cancer is a disease that can be seen as a complex system whose dynamics and growth result from nonlinear processes coupled across wide ranges of spatio-temporal scales. The current mathematical modeling literature addresses issues at various scales but the development of theoretical methodologies capable of bridging gaps across scales needs further study. We present a new theoretical framework based on Dynamic Density Functional Theory (DDFT extended, for the first time, to the dynamics of living tissues by accounting for cell density correlations, different cell types, phenotypes and cell birth/death processes, in order to provide a biophysically consistent description of processes across the scales. We present an application of this approach to tumor growth.
Experimental assessment of presumed filtered density function models
Stetsyuk, V.; Soulopoulos, N.; Hardalupas, Y.; Taylor, A. M. K. P.
2015-06-01
Measured filtered density functions (FDFs) as well as assumed beta distribution model of mixture fraction and "subgrid" scale (SGS) scalar variance z '' 2 ¯ , used typically in large eddy simulations, were studied by analysing experimental data, obtained from two-dimensional planar, laser induced fluorescence measurements in isothermal swirling turbulent flows at a constant Reynolds number of 29 000 for different swirl numbers (0.3, 0.58, and 1.07). Two-dimensional spatial filtering, by using a box filter, was performed in order to obtain the filtered variables, namely, resolved mean and "subgrid" scale scalar variance. These were used as inputs for assumed beta distribution of mixture fraction and top-hat FDF shape estimates. The presumed beta distribution model, top-hat FDF, and the measured filtered density functions were used to integrate a laminar flamelet solution in order to calculate the corresponding resolved temperature. The experimentally measured FDFs varied with the flow swirl number and both axial and radial positions in the flow. The FDFs were unimodal at flow regions with low SGS scalar variance, z '' 2 ¯ 0.02. Bimodal FDF could be observed for a filter size of approximately 1.5-2 times the Batchelor scale. Unimodal FDF could be observed for a filter size as large as four times the Batchelor scale under well-mixed conditions. In addition, two common computational models (a gradient assumption and a scale similarity model) for the SGS scalar variance were used with the aim to evaluate their validity through comparison with the experimental data. It was found that the gradient assumption model performed generally better than the scale similarity one.
Cluster density functional theory for lattice models based on the theory of Möbius functions
Lafuente, Luis; Cuesta, José A.
2005-08-01
Rosenfeld's fundamental-measure theory for lattice models is given a rigorous formulation in terms of the theory of Möbius functions of partially ordered sets. The free-energy density functional is expressed as an expansion in a finite set of lattice clusters. This set is endowed with a partial order, so that the coefficients of the cluster expansion are connected to its Möbius function. Because of this, it is rigorously proven that a unique such expansion exists for any lattice model. The low-density analysis of the free-energy functional motivates a redefinition of the basic clusters (zero-dimensional cavities) which guarantees a correct zero-density limit of the pair and triplet direct correlation functions. This new definition extends Rosenfeld's theory to lattice models with any kind of short-range interaction (repulsive or attractive, hard or soft, one or multicomponent ...). Finally, a proof is given that these functionals have a consistent dimensional reduction, i.e. the functional for dimension d' can be obtained from that for dimension d (d' < d) if the latter is evaluated at a density profile confined to a d'-dimensional subset.
Cluster density functional theory for lattice models based on the theory of Moebius functions
Lafuente, Luis; Cuesta, Jose A [Grupo Interdisciplinar de Sistemas Complejos (GISC), Departamento de Matematicas, Universidad Carlos III de Madrid, 28911 Leganes, Madrid (Spain)
2005-08-26
Rosenfeld's fundamental-measure theory for lattice models is given a rigorous formulation in terms of the theory of Moebius functions of partially ordered sets. The free-energy density functional is expressed as an expansion in a finite set of lattice clusters. This set is endowed with a partial order, so that the coefficients of the cluster expansion are connected to its Moebius function. Because of this, it is rigorously proven that a unique such expansion exists for any lattice model. The low-density analysis of the free-energy functional motivates a redefinition of the basic clusters (zero-dimensional cavities) which guarantees a correct zero-density limit of the pair and triplet direct correlation functions. This new definition extends Rosenfeld's theory to lattice models with any kind of short-range interaction (repulsive or attractive, hard or soft, one or multicomponent ...). Finally, a proof is given that these functionals have a consistent dimensional reduction, i.e. the functional for dimension d' can be obtained from that for dimension d (d' < d) if the latter is evaluated at a density profile confined to a d'-dimensional subset.
Buckled graphene: A model study based on density functional theory
Khan, Mohammad A.
2010-09-01
We make use of ab initio calculations within density functional theory to investigate the influence of buckling on the electronic structure of single layer graphene. Our systematic study addresses a wide range of bond length and bond angle variations in order to obtain insights into the energy scale associated with the formation of ripples in a graphene sheet. © 2010 Elsevier B.V. All rights reserved.
Density Functional Modelling of Elastic Properties of Elemental Semiconductors
M. Verma
2011-01-01
Full Text Available The expressions for bulk modulus, its first and second pressure derivatives for elemental semiconductors are derived using the ab initio pseudopotential approach to the total crystal energy within the framework of local Density Functional formalism. The expression for the second pressure derivative of the bulk modulus for four-fold crystal structures are derived for the first time within the pseudopotential framework. The computed results for the semiconductors under study are very close to the available experimental data and will be useful in the study of equation of states.
SCAN-based hybrid and double-hybrid density functionals from models without fitted parameters
Hui, Kerwin; Chai, Jeng-Da
2015-01-01
By incorporating the nonempirical SCAN semilocal density functional [Sun, Ruzsinszky, and Perdew, Phys. Rev. Lett. 115, 036402 (2015)] in the underlying expression of four existing hybrid and double-hybrid models, we propose one hybrid (SCAN0) and three double-hybrid (SCAN0-DH, SCAN-QIDH, and SCAN0-2) density functionals, which are free from any fitted parameters. The SCAN-based double-hybrid functionals consistently outperform their parent SCAN semilocal functional for self-interaction probl...
Solovyeva, Alisa [Gorlaeus Laboratories, Leiden Institute of Chemistry, Leiden University, P.O. Box 9502, 2300 RA Leiden (Netherlands); Technical University Braunschweig, Institute for Physical and Theoretical Chemistry, Hans-Sommer-Str. 10, 38106 Braunschweig (Germany); Pavanello, Michele [Gorlaeus Laboratories, Leiden Institute of Chemistry, Leiden University, P.O. Box 9502, 2300 RA Leiden (Netherlands); Neugebauer, Johannes [Technical University Braunschweig, Institute for Physical and Theoretical Chemistry, Hans-Sommer-Str. 10, 38106 Braunschweig (Germany)
2012-05-21
Subsystem density-functional theory (DFT) is a powerful and efficient alternative to Kohn-Sham DFT for large systems composed of several weakly interacting subunits. Here, we provide a systematic investigation of the spin-density distributions obtained in subsystem DFT calculations for radicals in explicit environments. This includes a small radical in a solvent shell, a {pi}-stacked guanine-thymine radical cation, and a benchmark application to a model for the special pair radical cation, which is a dimer of bacteriochlorophyll pigments, from the photosynthetic reaction center of purple bacteria. We investigate the differences in the spin densities resulting from subsystem DFT and Kohn-Sham DFT calculations. In these comparisons, we focus on the problem of overdelocalization of spin densities due to the self-interaction error in DFT. It is demonstrated that subsystem DFT can reduce this problem, while it still allows to describe spin-polarization effects crossing the boundaries of the subsystems. In practical calculations of spin densities for radicals in a given environment, it may thus be a pragmatic alternative to Kohn-Sham DFT calculations. In our calculation on the special pair radical cation, we show that the coordinating histidine residues reduce the spin-density asymmetry between the two halves of this system, while inclusion of a larger binding pocket model increases this asymmetry. The unidirectional energy transfer in photosynthetic reaction centers is related to the asymmetry introduced by the protein environment.
Tabacchi, G; Hutter, J; Mundy, C
2005-04-07
A combined linear response--frozen electron density model has been implemented in a molecular dynamics scheme derived from an extended Lagrangian formalism. This approach is based on a partition of the electronic charge distribution into a frozen region described by Kim-Gordon theory, and a response contribution determined by the instaneous ionic configuration of the system. The method is free from empirical pair-potentials and the parameterization protocol involves only calculations on properly chosen subsystems. They apply this method to a series of alkali halides in different physical phases and are able to reproduce experimental structural and thermodynamic properties with an accuracy comparable to Kohn-Sham density functional calculations.
Laboratory Density Functionals
Giraud, B. G.
2007-01-01
We compare several definitions of the density of a self-bound system, such as a nucleus, in relation with its center-of-mass zero-point motion. A trivial deconvolution relates the internal density to the density defined in the laboratory frame. This result is useful for the practical definition of density functionals.
Laboratory Density Functionals
Giraud, B G
2007-01-01
We compare several definitions of the density of a self-bound system, such as a nucleus, in relation with its center-of-mass zero-point motion. A trivial deconvolution relates the internal density to the density defined in the laboratory frame. This result is useful for the practical definition of density functionals.
Effective model hierarchies for dynamic and static classical density functional theories
Majaniemi, S [Department of Applied Physics, Aalto University School of Science and Technology, PO Box 11100, FI-00076 Aalto (Finland); Provatas, N [Department of Materials Science and Engineering, McMaster University, 1280 Main Street West, Hamilton, ON, L8S-4L7 (Canada); Nonomura, M, E-mail: maj@fyslab.hut.f [Department of Physics, Graduate School of Science, Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba 263-8522 (Japan)
2010-09-15
The origin and methodology of deriving effective model hierarchies are presented with applications to solidification of crystalline solids. In particular, it is discussed how the form of the equations of motion and the effective parameters on larger scales can be obtained from the more microscopic models. It will be shown that tying together the dynamic structure of the projection operator formalism with static classical density functional theories can lead to incomplete (mass) transport properties even though the linearized hydrodynamics on large scales is correctly reproduced. To facilitate a more natural way of binding together the dynamics of the macrovariables and classical density functional theory, a dynamic generalization of density functional theory based on the nonequilibrium generating functional is suggested.
Modelling the Probability Density Function of IPTV Traffic Packet Delay Variation
Michal Halas
2012-01-01
Full Text Available This article deals with modelling the Probability density function of IPTV traffic packet delay variation. The use of this modelling is in an efficient de-jitter buffer estimation. When an IP packet travels across a network, it experiences delay and its variation. This variation is caused by routing, queueing systems and other influences like the processing delay of the network nodes. When we try to separate these at least three types of delay variation, we need a way to measure these types separately. This work is aimed to the delay variation caused by queueing systems which has the main implications to the form of the Probability density function.
Johansson, Mikael P; Sundholm, Dage
2004-02-15
We recently performed detailed analyses of the electronic structure of low-spin iron porphyrins using density-functional theory (DFT). Both the spin-density distributions of the oxidized, ferric forms, as well as the changes in total charge density upon reduction to the ferrous forms have been explored. Here, we compare the DFT results with wave-function theory, more specifically, with the approximate singles and doubles coupled-cluster method (CC2). Different spin states are considered by studying representative models of low spin, intermediate spin, and high spin species. The CC2 calculations corroborate the DFT results; the spin density exhibits the same amount of molecular spin polarization, and the charge delocalization is of comparable magnitude. Slight differences in the descriptions are noted and discussed.
Śmiga, Szymon; Fabiano, Eduardo; Constantin, Lucian A; Della Sala, Fabio
2017-02-14
The development of semilocal models for the kinetic energy density (KED) is an important topic in density functional theory (DFT). This is especially true for subsystem DFT, where these models are necessary to construct the required non-additive embedding contributions. In particular, these models can also be efficiently employed to replace the exact KED in meta-Generalized Gradient Approximation (meta-GGA) exchange-correlation functionals allowing to extend the subsystem DFT applicability to the meta-GGA level of theory. Here, we present a two-dimensional scan of semilocal KED models as linear functionals of the reduced gradient and of the reduced Laplacian, for atoms and weakly bound molecular systems. We find that several models can perform well but in any case the Laplacian contribution is extremely important to model the local features of the KED. Indeed a simple model constructed as the sum of Thomas-Fermi KED and 1/6 of the Laplacian of the density yields the best accuracy for atoms and weakly bound molecular systems. These KED models are tested within subsystem DFT with various meta-GGA exchange-correlation functionals for non-bonded systems, showing a good accuracy of the method.
Wellendorff, Jess; Lundgård, Keld Troen; Møgelhøj, Andreas
2012-01-01
A methodology for semiempirical density functional optimization, using regularization and cross-validation methods from machine learning, is developed. We demonstrate that such methods enable well-behaved exchange-correlation approximations in very flexible model spaces, thus avoiding the overfit...
Numerical Methods for a Kohn-Sham Density Functional Model Based on Optimal Transport.
Chen, Huajie; Friesecke, Gero; Mendl, Christian B
2014-10-14
In this paper, we study numerical discretizations to solve density functional models in the "strictly correlated electrons" (SCE) framework. Unlike previous studies, our work is not restricted to radially symmetric densities. In the SCE framework, the exchange-correlation functional encodes the effects of the strong correlation regime by minimizing the pairwise Coulomb repulsion, resulting in an optimal transport problem. We give a mathematical derivation of the self-consistent Kohn-Sham-SCE equations, construct an efficient numerical discretization for this type of problem for N = 2 electrons, and apply it to the H2 molecule in its dissociating limit.
Ishima, R; Yamasaki, K; Nagayama, K
1995-12-01
Parameters used in model-free analysis were related to simulated spectral density functions in a frequency region experimentally obtained by quasi-spectral density function analysis of (15)N nuclei. Five kinds of motional models used in recent model-free analyses were characterized by a simple classification of the experimental spectral density function. We demonstrate advantages and limitations of each of the motional models. To verify the character of the models, model selection using experimental spectral density functions was examined.
Engel, J
2006-01-01
The Hohenberg-Kohn theorem and Kohn-Sham procedure are extended to functionals of the localized intrinsic density of a self-bound system such as a nucleus. After defining the intrinsic-density functional, we modify the usual Kohn-Sham procedure slightly to evaluate the mean-field approximation to the functional, and carefully describe the construction of the leading corrections for a system of fermions in one dimension with a spin-degeneracy equal to the number of particles N. Despite the fact that the corrections are complicated and nonlocal, we are able to construct a local Skyrme-like intrinsic-density functional that, while different from the exact functional, shares with it a minimum value equal to the exact ground-state energy at the exact ground-state intrinsic density, to next-to-leading order in 1/N. We briefly discuss implications for real Skyrme functionals.
Lagrangian filtered density function for LES-based stochastic modelling of turbulent dispersed flows
Innocenti, A; Chibbaro, S
2016-01-01
The Eulerian-Lagrangian approach based on Large-Eddy Simulation (LES) is one of the most promising and viable numerical tools to study turbulent dispersed flows when the computational cost of Direct Numerical Simulation (DNS) becomes too expensive. The applicability of this approach is however limited if the effects of the Sub-Grid Scales (SGS) of the flow on particle dynamics are neglected. In this paper, we propose to take these effects into account by means of a Lagrangian stochastic SGS model for the equations of particle motion. The model extends to particle-laden flows the velocity-filtered density function method originally developed for reactive flows. The underlying filtered density function is simulated through a Lagrangian Monte Carlo procedure that solves for a set of Stochastic Differential Equations (SDEs) along individual particle trajectories. The resulting model is tested for the reference case of turbulent channel flow, using a hybrid algorithm in which the fluid velocity field is provided b...
Implicit solvation model for density-functional study of nanocrystal surfaces and reaction pathways
Mathew, Kiran; Sundararaman, Ravishankar; Letchworth-Weaver, Kendra; Arias, T. A.; Hennig, Richard G.
2014-02-01
Solid-liquid interfaces are at the heart of many modern-day technologies and provide a challenge to many materials simulation methods. A realistic first-principles computational study of such systems entails the inclusion of solvent effects. In this work, we implement an implicit solvation model that has a firm theoretical foundation into the widely used density-functional code Vienna ab initio Software Package. The implicit solvation model follows the framework of joint density functional theory. We describe the framework, our algorithm and implementation, and benchmarks for small molecular systems. We apply the solvation model to study the surface energies of different facets of semiconducting and metallic nanocrystals and the SN2 reaction pathway. We find that solvation reduces the surface energies of the nanocrystals, especially for the semiconducting ones and increases the energy barrier of the SN2 reaction.
A fundamental measure density functional for fluid and crystal phases of the Asakura-Oosawa model
Mortazavifar, Mostafa; Oettel, Martin
2016-06-01
We investigate a density functional for the Asakura-Oosawa model of colloid-polymer mixtures, describing both fluid and crystal phases. It is derived by linearizing the two-component fundamental-measure hard sphere tensor functional in the second (polymer) component. We discuss the formulation of an effective density functional for colloids only. For small polymer-colloid size ratios the effective, polymer-induced potential between colloids is short-range attractive and of two-body form but we show that the effective density functional is not equivalent to standard mean-field approaches where attractions are taken into account by terms second order in the colloid density. We calculate numerically free energies and phase diagrams in good agreement with available simulations, furthermore we discuss the colloid and polymer distributions in the crystal and determine equilibrium vacancy concentrations. Numerical results reveal a fairly strong sensitivity to the specific type of underlying fundamental measure hard sphere functional which could aid further development of fundamental measure theory.
Density-functional theory of a lattice-gas model with vapour, liquid, and solid phases
Prestipino, S.; Giaquinta, P. V.
2003-01-01
We use the classical version of the density-functional theory in the weighted-density approximation to build up the entire phase diagram and the interface structure of a two-dimensional lattice-gas model which is known, from previous studies, to possess three stable phases -- solid, liquid, and vapour. Following the common practice, the attractive part of the potential is treated in a mean-field-like fashion, although with different prescriptions for the solid and the fluid phases. It turns o...
Kim, Y. C.; Wong, W. F.; Powers, E. J.; Roth, J. R.
1979-01-01
It is shown how the use of higher coherence functions can recover some of the lost coherence due to nonlinear relationship between two fluctuating quantities whose degree of mutual coherence is being measured. The relationship between the two processes is modeled with the aid of a linear term and a quadratic term. As a specific example, the relationship between plasma density and potential fluctuations in a plasma is considered. The fraction of power in the auto-power spectrum of the potential fluctuations due to a linear relationship and to a quadratic relationship between the density and potential fluctuations is estimated.
Nomura, K; Otsuka, T; Shimizu, N; Vretenar, D
2011-01-01
Microscopic energy density functionals (EDF) have become a standard tool for nuclear structure calculations, providing an accurate global description of nuclear ground states and collective excitations. For spectroscopic applications this framework has to be extended to account for collective correlations related to restoration of symmetries broken by the static mean field, and for fluctuations of collective variables. In this work we compare two approaches to five-dimensional quadrupole dynamics: the collective Hamiltonian for quadrupole vibrations and rotations, and the Interacting Boson Model. The two models are compared in a study of the evolution of non-axial shapes in Pt isotopes. Starting from the binding energy surfaces of $^{192,194,196}$Pt, calculated with a microscopic energy density functional, we analyze the resulting low-energy collective spectra obtained from the collective Hamiltonian, and the corresponding IBM-2 Hamiltonian. The calculated excitation spectra and transition probabilities for t...
Shankar, Sadasivan; Simka, Harsono; Haverty, Michael
2008-02-13
In the semiconductor industry, the use of new materials has been increasing with the advent of nanotechnology. As critical dimensions decrease, and the number of materials increases, the interactions between heterogeneous materials themselves and processing increase in complexity. Traditionally, applications of ab initio techniques are confined to electronic structure and band gap calculations of bulk materials, which are then used in coarse-grained models such as mesoscopic and continuum models. Density functional theory is the most widely used ab initio technique that was successfully extended to several applications. This paper illustrates applications of density functional theory to semiconductor processes and proposes further opportunities for use of such techniques in process development.
Density functionals from deep learning
McMahon, Jeffrey M
2016-01-01
Density-functional theory is a formally exact description of a many-body quantum system in terms of its density; in practice, however, approximations to the universal density functional are required. In this work, a model based on deep learning is developed to approximate this functional. Deep learning allows computational models that are capable of naturally discovering intricate structure in large and/or high-dimensional data sets, with multiple levels of abstraction. As no assumptions are made as to the form of this structure, this approach is much more powerful and flexible than traditional approaches. As an example application, the model is shown to perform well on approximating the kinetic-energy density functional for noninteracting electrons. The model is analyzed in detail, and its advantages over conventional machine learning are discussed.
Configurational study of amino-functionalized silica surfaces: A density functional theory modeling.
Hozhabr Araghi, Samira; Entezari, Mohammad H; Sadeghi Googheri, Mohammad Sadegh
2015-06-01
Despite extensive studies of the amino-functionalized silica surfaces, a comprehensive investigation of the effects of configuration and hydrolysis of 3-aminopropyltriethoxysilan (APTES) molecules attached on silica has not been studied yet. Therefore, the methods of quantum mechanics were used for the study of configuration and hydrolysis forms of APTES molecules attached on the surface. For this purpose, five different categories based on the number of hydrolyzed ethoxy groups including 16 configurations were designed and analyzed by the density functional theory (DFT) method. The steric hindrance as an effective factor on the stability order was extracted from structural analysis. Other impressive parameters such as the effects of hydrogen bond and electron delocalization energy were obtained by using the atoms in molecules (AIM) and natural bond orbitals (NBO) theories. Consequently, it was found that the stability of configurations was attributed to steric effects, hydrogen bond numbers and electron delocalization energy. The maximum stability was achieved when at least two of these parameters cooperate with each other.
Falk, Anne Katrine Vinther; Gryning, Sven-Erik
1997-01-01
In this model for atmospheric dispersion particles are simulated by the Langevin Equation, which is a stochastic differential equation. It uses the probability density function (PDF) of the vertical velocity fluctuations as input. The PDF is constructed as an expansion after Hermite polynomials....... In several previous works where the PDF was expressed this way, further use was hampered by the fact that the PDF takes negative values for a range of velocities. This problem is overcome in the present formulation...
Atomic density functional and diagram of structures in the phase field crystal model
Ankudinov, V. E.; Galenko, P. K.; Kropotin, N. V.; Krivilyov, M. D.
2016-02-01
The phase field crystal model provides a continual description of the atomic density over the diffusion time of reactions. We consider a homogeneous structure (liquid) and a perfect periodic crystal, which are constructed from the one-mode approximation of the phase field crystal model. A diagram of 2D structures is constructed from the analytic solutions of the model using atomic density functionals. The diagram predicts equilibrium atomic configurations for transitions from the metastable state and includes the domains of existence of homogeneous, triangular, and striped structures corresponding to a liquid, a body-centered cubic crystal, and a longitudinal cross section of cylindrical tubes. The method developed here is employed for constructing the diagram for the homogeneous liquid phase and the body-centered iron lattice. The expression for the free energy is derived analytically from density functional theory. The specific features of approximating the phase field crystal model are compared with the approximations and conclusions of the weak crystallization and 2D melting theories.
Bakosi, J; Boybeyi, Z; 10.1063/1.2803348
2010-01-01
Dispersion of a passive scalar from concentrated sources in fully developed turbulent channel flow is studied with the probability density function (PDF) method. The joint PDF of velocity, turbulent frequency and scalar concentration is represented by a large number of Lagrangian particles. A stochastic near-wall PDF model combines the generalized Langevin model of Haworth & Pope with Durbin's method of elliptic relaxation to provide a mathematically exact treatment of convective and viscous transport with a non-local representation of the near-wall Reynolds stress anisotropy. The presence of walls is incorporated through the imposition of no-slip and impermeability conditions on particles without the use of damping or wall-functions. Information on the turbulent timescale is supplied by the gamma-distribution model of van Slooten et al. Two different micromixing models are compared that incorporate the effect of small scale mixing on the transported scalar: the widely used interaction by exchange with th...
Brandenburg, Jan Gerit; Grimme, Stefan
2014-06-05
The ambitious goal of organic crystal structure prediction challenges theoretical methods regarding their accuracy and efficiency. Dispersion-corrected density functional theory (DFT-D) in principle is applicable, but the computational demands, for example, to compute a huge number of polymorphs, are too high. Here, we demonstrate that this task can be carried out by a dispersion-corrected density functional tight binding (DFTB) method. The semiempirical Hamiltonian with the D3 correction can accurately and efficiently model both solid- and gas-phase inter- and intramolecular interactions at a speed up of 2 orders of magnitude compared to DFT-D. The mean absolute deviations for interaction (lattice) energies for various databases are typically 2-3 kcal/mol (10-20%), that is, only about two times larger than those for DFT-D. For zero-point phonon energies, small deviations of <0.5 kcal/mol compared to DFT-D are obtained.
Partition density functional theory
Nafziger, Jonathan
Partition density functional theory (PDFT) is a method for dividing a molecular electronic structure calculation into fragment calculations. The molecular density and energy corresponding to Kohn Sham density-functional theory (KS-DFT) may be exactly recovered from these fragments. Each fragment acts as an isolated system except for the influence of a global one-body 'partition' potential which deforms the fragment densities. In this work, the developments of PDFT are put into the context of other fragment-based density functional methods. We developed three numerical implementations of PDFT: One within the NWChem computational chemistry package using basis sets, and the other two developed from scratch using real-space grids. It is shown that all three of these programs can exactly reproduce a KS-DFT calculation via fragment calculations. The first of our in-house codes handles non-interacting electrons in arbitrary one-dimensional potentials with any number of fragments. This code is used to explore how the exact partition potential changes for different partitionings of the same system and also to study features which determine which systems yield non-integer PDFT occupations and which systems are locked into integer PDFT occupations. The second in-house code, CADMium, performs real-space calculations of diatomic molecules. Features of the exact partition potential are studied for a variety of cases and an analytical formula determining singularities in the partition potential is derived. We introduce an approximation for the non-additive kinetic energy and show how this quantity can be computed exactly. Finally a PDFT functional is developed to address the issues of static correlation and delocalization errors in approximations within DFT. The functional is applied to the dissociation of H2 + and H2.
Skulason, Egill; Tripkovic, Vladimir; Björketun, Mårten
2010-01-01
Density functional theory calculations have been performed for the three elementary steps―Tafel, Heyrovsky, and Volmer―involved in the hydrogen oxidation reaction (HOR) and its reverse, the hydrogen evolution reaction (HER). For the Pt(111) surface a detailed model consisting of a negatively...... charged Pt(111) slab and solvated protons in up to three water bilayers is considered and reaction energies and activation barriers are determined by using a newly developed computational scheme where the potential can be kept constant during a charge transfer reaction. We determine the rate limiting...
Quantal density functional theory
Sahni, Viraht
2016-01-01
This book deals with quantal density functional theory (QDFT) which is a time-dependent local effective potential theory of the electronic structure of matter. The treated time-independent QDFT constitutes a special case. In the 2nd edition, the theory is extended to include the presence of external magnetostatic fields. The theory is a description of matter based on the ‘quantal Newtonian’ first and second laws which is in terms of “classical” fields that pervade all space, and their quantal sources. The fields, which are explicitly defined, are separately representative of electron correlations due to the Pauli exclusion principle, Coulomb repulsion, correlation-kinetic, correlation-current-density, and correlation-magnetic effects. The book further describes Schrödinger theory from the new physical perspective of fields and quantal sources. It also describes traditional Hohenberg-Kohn-Sham DFT, and explains via QDFT the physics underlying the various energy functionals and functional derivatives o...
Innocenti, Alessio; Marchioli, Cristian; Chibbaro, Sergio
2016-11-01
The Eulerian-Lagrangian approach based on Large-Eddy Simulation (LES) is one of the most promising and viable numerical tools to study particle-laden turbulent flows, when the computational cost of Direct Numerical Simulation (DNS) becomes too expensive. The applicability of this approach is however limited if the effects of the Sub-Grid Scales (SGSs) of the flow on particle dynamics are neglected. In this paper, we propose to take these effects into account by means of a Lagrangian stochastic SGS model for the equations of particle motion. The model extends to particle-laden flows the velocity-filtered density function method originally developed for reactive flows. The underlying filtered density function is simulated through a Lagrangian Monte Carlo procedure that solves a set of Stochastic Differential Equations (SDEs) along individual particle trajectories. The resulting model is tested for the reference case of turbulent channel flow, using a hybrid algorithm in which the fluid velocity field is provided by LES and then used to advance the SDEs in time. The model consistency is assessed in the limit of particles with zero inertia, when "duplicate fields" are available from both the Eulerian LES and the Lagrangian tracking. Tests with inertial particles were performed to examine the capability of the model to capture the particle preferential concentration and near-wall segregation. Upon comparison with DNS-based statistics, our results show improved accuracy and considerably reduced errors with respect to the case in which no SGS model is used in the equations of particle motion.
Palma, G
2009-01-01
The probability density function (PDF) of some global average quantity plays a fundamental role in critical and highly correlated systems. We explicitly compute this quantity as a function of the magnetization for the two dimensional XY model in its harmonic approximation. Numerical simulations and perturbative results have shown a Gumbel-like shape of the PDF, in spite of the fact that the average magnetization is not an extreme variable. Our analytical result allows to test both perturbative analytical expansions and also numerical computations performed previously. Perfect agreement is found for the first moments of the PDF. Also for large volume and in the high temperature limit the distribution becomes Gaussian, as it should be. In the low temperature regime its numerical evaluation is compatible with a Gumbel distribution.
Applicability of Density Functional Theory to Model Molecular Solvation in Superfluid 4He
Isojärvi, Teemu; Lehtovaara, Lauri; Eloranta, Jussi
2006-09-01
Density functional theory (DFT) has been extensively applied to model solvation of atomic and molecular species ("impurities") in superfluid helium. The interaction between the impurity and the surrounding liquid may range from purely repulsive (e.g. alkali metal atoms and most diatomic excimers) to deeply bound potentials (e:g. aromatic compounds). In order to apply DFT to model processes relevant to low temperature chemistry in superfluid 4He, it is essential to obtain the limits of applicability of the theory. For purely repulsive potentials, the spatial gradient of the liquid density remains small and DFT is expected to produce accurate results. This has been verified previously by comparing DFT results to quantum Monte Carlo calculations. For strong binding potentials, however, DFT fails since the individual He atoms tend to localize about the potential minimum. The present work tests the accuracy of DFT between the weakly and strongly bound regimes. This is done by comparing DFT and quantum Monte Carlo (diffusion Monte Carlo) results for various realistic model potentials with varying degree of binding.
Bakosi, J; Boybeyi, Z
2010-01-01
In probability density function (PDF) methods a transport equation is solved numerically to compute the time and space dependent probability distribution of several flow variables in a turbulent flow. The joint PDF of the velocity components contains information on all one-point one-time statistics of the turbulent velocity field, including the mean, the Reynolds stresses and higher-order statistics. We developed a series of numerical algorithms to model the joint PDF of turbulent velocity, frequency and scalar compositions for high-Reynolds-number incompressible flows in complex geometries using unstructured grids. Advection, viscous diffusion and chemical reaction appear in closed form in the PDF formulation, thus require no closure hypotheses. The generalized Langevin model (GLM) is combined with an elliptic relaxation technique to represent the non-local effect of walls on the pressure redistribution and anisotropic dissipation of turbulent kinetic energy. The governing system of equations is solved fully...
Partial ionization in dense plasmas: Comparisons among average-atom density functional models
Murillo, Michael S.; Weisheit, Jon; Hansen, Stephanie B.; Dharma-wardana, M. W. C.
2013-06-01
Nuclei interacting with electrons in dense plasmas acquire electronic bound states, modify continuum states, generate resonances and hopping electron states, and generate short-range ionic order. The mean ionization state (MIS), i.e, the mean charge Z of an average ion in such plasmas, is a valuable concept: Pseudopotentials, pair-distribution functions, equations of state, transport properties, energy-relaxation rates, opacity, radiative processes, etc., can all be formulated using the MIS of the plasma more concisely than with an all-electron description. However, the MIS does not have a unique definition and is used and defined differently in different statistical models of plasmas. Here, using the MIS formulations of several average-atom models based on density functional theory, we compare numerical results for Be, Al, and Cu plasmas for conditions inclusive of incomplete atomic ionization and partial electron degeneracy. By contrasting modern orbital-based models with orbital-free Thomas-Fermi models, we quantify the effects of shell structure, continuum resonances, the role of exchange and correlation, and the effects of different choices of the fundamental cell and boundary conditions. Finally, the role of the MIS in plasma applications is illustrated in the context of x-ray Thomson scattering in warm dense matter.
Partial ionization in dense plasmas: comparisons among average-atom density functional models.
Murillo, Michael S; Weisheit, Jon; Hansen, Stephanie B; Dharma-wardana, M W C
2013-06-01
Nuclei interacting with electrons in dense plasmas acquire electronic bound states, modify continuum states, generate resonances and hopping electron states, and generate short-range ionic order. The mean ionization state (MIS), i.e, the mean charge Z of an average ion in such plasmas, is a valuable concept: Pseudopotentials, pair-distribution functions, equations of state, transport properties, energy-relaxation rates, opacity, radiative processes, etc., can all be formulated using the MIS of the plasma more concisely than with an all-electron description. However, the MIS does not have a unique definition and is used and defined differently in different statistical models of plasmas. Here, using the MIS formulations of several average-atom models based on density functional theory, we compare numerical results for Be, Al, and Cu plasmas for conditions inclusive of incomplete atomic ionization and partial electron degeneracy. By contrasting modern orbital-based models with orbital-free Thomas-Fermi models, we quantify the effects of shell structure, continuum resonances, the role of exchange and correlation, and the effects of different choices of the fundamental cell and boundary conditions. Finally, the role of the MIS in plasma applications is illustrated in the context of x-ray Thomson scattering in warm dense matter.
SCAN-based hybrid and double-hybrid density functionals from parameter-free models
Hui, Kerwin
2015-01-01
By incorporating the nonempirical SCAN semilocal density functional [Sun, Ruzsinszky, and Perdew, Phys. Rev. Lett. 115, 036402 (2015)] in the underlying expression, we propose one hybrid (SCAN0) and three double-hybrid (SCAN0-DH, SCAN-QIDH, and SCAN0-2) density functionals, which are free of any empirical parameter. The SCAN-based hybrid and double-hybrid functionals consistently outperform their parent SCAN semilocal functional for a wide range of applications. The SCAN-based semilocal, hybrid, and double-hybrid functionals generally perform better than the corresponding PBE-based functionals. In addition, the SCAN0-2 and SCAN-QIDH double-hybrid functionals significantly reduce the qualitative failures of the SCAN semilocal functional, such as the self-interaction error and noncovalent interaction error, extending the applicability of the SCAN-based functionals to a very diverse range of systems.
Podmaniczky, Frigyes; Tóth, Gyula I.; Tegze, György; Gránásy, László
2015-11-01
Crystallization of supersaturated liquids usually starts by epitaxial growth or by heterogeneous nucleation on foreign surfaces. Herein, we review recent advances made in modeling heteroepitaxy and heterogeneous nucleation on flat/modulated surfaces and nanoparticles within the framework of a simple dynamical density functional theory, known as the phase-field crystal model. It will be shown that the contact angle and the nucleation barrier are nonmonotonous functions of the lattice mismatch between the substrate and the crystalline phase. In continuous cooling studies for substrates with lattice mismatch, we recover qualitatively the Matthews-Blakeslee mechanism of stress release via the misfit dislocations. The simulations performed for particle-induced freezing will be confronted with recent analytical results, exploring thus the validity range of the latter. It will be demonstrated that time-dependent studies are essential, as investigations based on equilibrium properties often cannot identify the preferred nucleation pathways. Modeling of these phenomena is essential for designing materials on the basis of controlled nucleation and/or nano-patterning.
Toward Quantitative Coarse-Grained Models of Lipids with Fluids Density Functional Theory.
Frink, Laura J Douglas; Frischknecht, Amalie L; Heroux, Michael A; Parks, Michael L; Salinger, Andrew G
2012-04-10
We describe methods to determine optimal coarse-grained models of lipid bilayers for use in fluids density functional theory (fluids-DFT) calculations. Both coarse-grained lipid architecture and optimal parametrizations of the models based on experimental measures are discussed in the context of dipalmitoylphosphatidylcholine (DPPC) lipid bilayers in water. The calculations are based on a combination of the modified-iSAFT theory for bonded systems and an accurate fundamental measures theory (FMT) for hard sphere reference fluids. We furthermore discuss a novel approach for pressure control in the fluids-DFT calculations that facilitates both partitioning studies and zero tension control for the bilayer studies. A detailed discussion of the numerical implementations for both solvers and pressure control capabilities are provided. We show that it is possible to develop a coarse-grained lipid bilayer model that is consistent with experimental properties (thickness and area per lipid) of DPPC provided that the coarse-graining is not too extreme. As a final test of the model, we find that the predicted area compressibility moduli and lateral pressure profiles of the optimized models are in reasonable agreement with prior results.
A Joint Density Function in Phase-type (2) Risk Model
XU HUAI; TANG LING; Wang De-hui
2012-01-01
In this paper,we consider a Gerber-Shiu discounted penalty function in Sparre Andersen risk process in which claim inter-arrival times have a phase-type (2) distribution,a distribution with a density satisfying a second order linear differential equation.By conditioning on the time and the amount of the first claim,we derive a Laplace transform of the Gerber-Shiu discounted penalty function,and then we consider the joint density function of the surplus prior to ruin and the deficit at ruin and some ruin related problems.Finally,we give a numerical example to illustrate the application of the results.
Modeling solvation effects in real-space and real-time within density functional approaches
Delgado, Alain [Istituto Nanoscienze - CNR, Centro S3, via Campi 213/A, 41125 Modena (Italy); Centro de Aplicaciones Tecnológicas y Desarrollo Nuclear, Calle 30 # 502, 11300 La Habana (Cuba); Corni, Stefano; Pittalis, Stefano; Rozzi, Carlo Andrea [Istituto Nanoscienze - CNR, Centro S3, via Campi 213/A, 41125 Modena (Italy)
2015-10-14
The Polarizable Continuum Model (PCM) can be used in conjunction with Density Functional Theory (DFT) and its time-dependent extension (TDDFT) to simulate the electronic and optical properties of molecules and nanoparticles immersed in a dielectric environment, typically liquid solvents. In this contribution, we develop a methodology to account for solvation effects in real-space (and real-time) (TD)DFT calculations. The boundary elements method is used to calculate the solvent reaction potential in terms of the apparent charges that spread over the van der Waals solute surface. In a real-space representation, this potential may exhibit a Coulomb singularity at grid points that are close to the cavity surface. We propose a simple approach to regularize such singularity by using a set of spherical Gaussian functions to distribute the apparent charges. We have implemented the proposed method in the OCTOPUS code and present results for the solvation free energies and solvatochromic shifts for a representative set of organic molecules in water.
Nomura, K.; Rodríguez-Guzmán, R.; Humadi, Y. M.; Robledo, L. M.; Abusara, H.
2017-09-01
The evolution and coexistence of the nuclear shapes as well as the corresponding low-lying collective states and electromagnetic transition rates are investigated along the krypton isotopic chain within the framework of the interacting boson model (IBM). The IBM Hamiltonian is determined through mean-field calculations based on the several parametrizations of the Gogny energy density functional and the relativistic mean-field Lagrangian. The mean-field energy surfaces, as functions of the axial β and triaxial γ quadrupole deformations, are mapped onto the expectation value of the interacting-boson Hamiltonian that explicitly includes the particle-hole excitations. The resulting boson Hamiltonian is then used to compute low-energy excitation spectra as well as E 2 and E 0 transition probabilities for Kr-10070. Our results point to a number of examples of prolate-oblate shape transitions and coexistence both on the neutron-deficient and neutron-rich sides. A reasonable agreement with the available experimental data is obtained for the considered nuclear properties.
Li, Tsung-Lung; Lu, Wen-Cai
2015-10-05
In this work, Koopmans' theorem for Kohn-Sham density functional theory (KS-DFT) is applied to the photoemission spectra (PES) modeling over the entire valence-band. To examine the validity of this application, a PES modeling scheme is developed to facilitate a full valence-band comparison of theoretical PES spectra with experiments. The PES model incorporates the variations of electron ionization cross-sections over atomic orbitals and a linear dispersion of spectral broadening widths. KS-DFT simulations of pristine rubrene (5,6,11,12-tetraphenyltetracene) and potassium-rubrene complex are performed, and the simulation results are used as the input to the PES models. Two conclusions are reached. First, decompositions of the theoretical total spectra show that the dissociated electron of the potassium mainly remains on the backbone and has little effect on the electronic structures of phenyl side groups. This and other electronic-structure results deduced from the spectral decompositions have been qualitatively obtained with the anionic approximation to potassium-rubrene complexes. The qualitative validity of the anionic approximation is thus verified. Second, comparison of the theoretical PES with the experiments shows that the full-scale simulations combined with the PES modeling methods greatly enhance the agreement on spectral shapes over the anionic approximation. This agreement of the theoretical PES spectra with the experiments over the full valence-band can be regarded, to some extent, as a collective validation of the application of Koopmans' theorem for KS-DFT to valence-band PES, at least, for this hydrocarbon and its alkali-adsorbed complex. Copyright © 2015 Elsevier B.V. All rights reserved.
Cosmological Density Distribution Function from the Ellipsoidal Collapse Model in Real Space
Ohta, Y; Taruya, A; Ohta, Yasuhiro; Kayo, Issha; Taruya, Atsushi
2004-01-01
We calculate the one-point probability distribution function (PDF) for cosmic density in non-linear regime of the gravitational evolution. Under the local approximation that the evolution of cosmic fluid fields can be characterized by the Lagrangian local dynamics with finite degrees of freedom, the analytic expressions of PDF are derived taking account of the smoothing effect. The validity and the usefulness of the local approximation are then discussed comparing those results with N-body simulations in a Gaussian initial condition. Adopting the ellipsoidal collapse model (ECM) and the spherical collapse model (SCM) as Lagrangian local dynamics, we found that the PDFs from the local approximation excellently match the simulation results in the case of the cold dark matter initial spectrum. As for the scale-free initial spectra given by $P(k)\\propto k^n$, N-body result suffers from spurious numerical effects, which prevent us to give a detailed comparison. Nevertheless, at the quality of N-body data, the mode...
Jacob, D; Palacios, J J
2011-01-28
We study the performance of two different electrode models in quantum transport calculations based on density functional theory: parametrized Bethe lattices and quasi-one-dimensional wires or nanowires. A detailed account of implementation details in both the cases is given. From the systematic study of nanocontacts made of representative metallic elements, we can conclude that the parametrized electrode models represent an excellent compromise between computational cost and electronic structure definition as long as the aim is to compare with experiments where the precise atomic structure of the electrodes is not relevant or defined with precision. The results obtained using parametrized Bethe lattices are essentially similar to the ones obtained with quasi-one-dimensional electrodes for large enough cross-sections of these, adding a natural smearing to the transmission curves that mimics the true nature of polycrystalline electrodes. The latter are more demanding from the computational point of view, but present the advantage of expanding the range of applicability of transport calculations to situations where the electrodes have a well-defined atomic structure, as is the case for carbon nanotubes, graphene nanoribbons, or semiconducting nanowires. All the analysis is done with the help of codes developed by the authors which can be found in the quantum transport toolbox ALACANT and are publicly available.
Ansari, R.; Shahnazari, A.; Rouhi, S.
2017-04-01
In this paper, the density functional theory calculations are used to obtain the elastic properties of zigzag phosphorene nanotubes. Besides, based on the similarity between phosphorene nanotubes and a space-frame structure, a three-dimensional finite element model is proposed in which the atomic bonds are simulated by beam elements. The results of density functional theory are employed to compute the properties of the beam elements. Finally, using the proposed finite element model, the elastic modulus of the zigzag phosphorene nanotubes is computed. It is shown that phosphorene nanotubes with larger radii have larger Young's modulus. Comparing the results of finite element model with those of density functional theory, it is concluded that the proposed model can predict the elastic modulus of phosphorene nanotubes with a good accuracy.
Bell Inequalities and Pseudo-functional densities
Geurdes, J F
2001-01-01
A local hidden variable model with pseudo-functional density function restricted to a binary probability event space is demonstrated to be able to reproduce the quantum correlation in an Einstein Podolsky Rosen Bohm and Aharonov type of experiment. In the density function use is made of Hadamard's finite part which disables the possibility to derive Bell's inequality from models with such a type of density function.
Gaonkar, Narayan; Vaidya, R G
2016-05-01
A simple method to estimate the density of biodiesel blend as simultaneous function of temperature and volume percent of biodiesel is proposed. Employing the Kay's mixing rule, we developed a model and investigated theoretically the density of different vegetable oil biodiesel blends as a simultaneous function of temperature and volume percent of biodiesel. Key advantage of the proposed model is that it requires only a single set of density values of components of biodiesel blends at any two different temperatures. We notice that the density of blend linearly decreases with increase in temperature and increases with increase in volume percent of the biodiesel. The lower values of standard estimate of error (SEE = 0.0003-0.0022) and absolute average deviation (AAD = 0.03-0.15 %) obtained using the proposed model indicate the predictive capability. The predicted values found good agreement with the recent available experimental data.
Point defect absorption by grain boundaries in α -iron by atomic density function modeling
Kapikranian, O.; Zapolsky, H.; Patte, R.; Pareige, C.; Radiguet, B.; Pareige, P.
2015-12-01
Using the atomic density function theory (ADFT), we examine the point defect absorption at [110] symmetrical tilt grain boundaries in body-centered cubic iron. It is found that the sink strength strongly depends on misorientation angle. We also show that the ADFT is able to reproduce reasonably well the elastic properties and the point defect formation volume in α -iron.
Semiclassics in Density Functional Theory
Lee, Donghyung; Cangi, Attila; Elliott, Peter; Burke, Kieron
2009-03-01
Recently, we published an article [1] about the semiclassical origin of density functional theory. We showed that the density and the kinetic energy density of one dimensional finite systems with hard walls can be expressed in terms of the external potential using the semiclassical Green's function method. Here, we show a uniformization scheme for the semiclassical density and the kinetic energy density for turning-point problems.[1] P. Elliott, D. Lee, A. Cangi, and K. Burke, Phys. Rev. Lett. 100, 256406 (2008).
Sundararaman, Ravishankar; Arias, T A
2014-01-01
Continuum solvation models enable efficient first principles calculations of chemical reactions in solution, but require extensive parametrization and fitting for each solvent and class of solute systems. Here, we examine the assumptions of continuum solvation models in detail and replace empirical terms with physical models in order to construct a minimally-empirical solvation model. Specifically, we derive solvent radii from the nonlocal dielectric response of the solvent from ab initio calculations, construct a closed-form and parameter-free weighted-density approximation for the free energy of the cavity formation, and employ a pair-potential approximation for the dispersion energy. We show that the resulting model with a single solvent-independent parameter: the electron density threshold ($n_c$), and a single solvent-dependent parameter: the dispersion scale factor ($s_6$), reproduces solvation energies of organic molecules in water, chloroform and carbon tetrachloride with RMS errors of 1.1, 0.6 and 0....
Chan, Poh Yin; Tong, Chi Ming; Durrant, Marcus C
2011-09-01
An empirical method for estimation of the boiling points of organic molecules based on density functional theory (DFT) calculations with polarized continuum model (PCM) solvent corrections has been developed. The boiling points are calculated as the sum of three contributions. The first term is calculated directly from the structural formula of the molecule, and is related to its effective surface area. The second is a measure of the electronic interactions between molecules, based on the DFT-PCM solvation energy, and the third is employed only for planar aromatic molecules. The method is applicable to a very diverse range of organic molecules, with normal boiling points in the range of -50 to 500 °C, and includes ten different elements (C, H, Br, Cl, F, N, O, P, S and Si). Plots of observed versus calculated boiling points gave R²=0.980 for a training set of 317 molecules, and R²=0.979 for a test set of 74 molecules. The role of intramolecular hydrogen bonding in lowering the boiling points of certain molecules is quantitatively discussed. Crown Copyright © 2011. Published by Elsevier Inc. All rights reserved.
Marinescu, Maria; Tudorache, Diana Gabriela; Marton, George Iuliu; Zalaru, Christina-Marie; Popa, Marcela; Chifiriuc, Mariana-Carmen; Stavarache, Cristina-Elena; Constantinescu, Catalin
2017-02-01
Eco-friendly, one-pot, solvent-free synthesis of biologically active 2-substituted benzimidazoles is presented and discussed herein. Novel N-Mannich bases are synthesized from benzimidazoles, secondary amines and formaldehyde, and their structures are confirmed by 1H nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and elemental analysis. All benzimidazole derivatives are evaluated by qualitative and quantitative methods against 9 bacterial strains. The largest microbicide and anti-biofilm effect is observed for the 2-(1-hydroxyethyl)-compounds. Density functional theory (DFT) modeling of the molecular structure and frontier molecular orbitals, i.e. highest occupied molecular orbital and lowest unoccupied molecular orbital (HOMO/LUMO), is accomplished by using the GAMESS 2012 software. Antimicrobial activity is correlated with the electronic parameters (chemical hardness, electronic chemical potential, global electrophilicity index), Mullikan atomic charges and geometric parameters of the benzimidazole compounds. The planarity of the compound, symmetry of the molecule, and the presence of a nucleophilic group, are advantages for a high antimicrobial activity. Finally, we briefly show that further accurate processing of such compounds into thin films and hybrid structures, e.g. by laser ablation matrix-assisted pulsed laser evaporation and/or laser-induced forward transfer, may indeed provide simple and environmental friendly, state-of-the-art solutions for antimicrobial coatings.
Modelling energy level alignment at organic interfaces and density functional theory
Flores, F.; Ortega, J.; Vazquez, Patricia
2009-01-01
A review of our theoretical understanding of the band alignment at organic interfaces is presented with particular emphasis on the metal/organic (MO) case. The unified IDIS (induced density of interface states) and the ICT (integer charge transfer) models are reviewed and shown to describe qualit...
Gong, Kai; Marshall, Bennett D; Chapman, Walter G
2013-09-07
We study the lower critical solution temperature (LCST) behavior of associating polymer brushes (i.e., poly(N-isopropylacrylamide)) using classical density functional theory. Without using any empirical or temperature-dependent parameters, we find the phase transition of polymer brushes from extended to collapsed structure with increasing temperature, indicating the LCST behavior of polymer brushes. The LCST behavior of associating polymer brushes is attributed to the interplay of hydrogen bonding interactions and Lennard-Jones attractions in the system. The effect of grafting density and molecular weight on the phase behavior of associating polymer brushes has been also investigated. We find no LCST behavior at low grafting density or molecular weight. Moreover, increasing grafting density decreases the LCST and swelling ratio of polymer brushes. Similarly, increasing molecular weight decreases the LCST but increases the swelling ratio. At very high grafting density, a partial collapsed structure appears near the LCST. Qualitatively consistent with experiments, our results provide insight into the molecular mechanism of LCST behavior of associating polymer brushes.
Maslennikova, Yu. S.; Nugmanov, I. S.
2016-08-01
The problem of probability density function estimation for a random process is one of the most common in practice. There are several methods to solve this problem. Presented laboratory work uses methods of the mathematical statistics to detect patterns in the realization of random process. On the basis of ergodic theory, we construct algorithm for estimating univariate probability density distribution function for a random process. Correlational analysis of realizations is applied to estimate the necessary size of the sample and the time of observation. Hypothesis testing for two probability distributions (normal and Cauchy) is used on the experimental data, using χ2 criterion. To facilitate understanding and clarity of the problem solved, we use ELVIS II platform and LabVIEW software package that allows us to make the necessary calculations, display results of the experiment and, most importantly, to control the experiment. At the same time students are introduced to a LabVIEW software package and its capabilities.
Nuclear single-particle states: dynamical shell model and energy density functional methods
Bortignon, P F; Sagawa, H
2010-01-01
We discuss different approaches to the problem of reproducing the observed features of nuclear single-particle (s.p.) spectra. In particular, we analyze the dominant energy peaks, and the single-particle strength fragmentation, using the example of neutron states in 208Pb. Our main emphasis is the interpretation of that fragmentation as due to particle-vibration coupling (PVC). We compare with recent Energy Density Functional (EDF) approaches, and try to present a critical perspective.
Population Density Modeling Tool
2014-02-05
194 POPULATION DENSITY MODELING TOOL by Davy Andrew Michael Knott David Burke 26 June 2012 Distribution...MARYLAND NAWCADPAX/TR-2012/194 26 June 2012 POPULATION DENSITY MODELING TOOL by Davy Andrew Michael Knott David Burke...Density Modeling Tool 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Davy Andrew Michael Knott David Burke 5d. PROJECT NUMBER
Backes, Steffen
2017-04-15
The study of the electronic properties of correlated systems is a very diverse field and has lead to valuable insight into the physics of real materials. In these systems, the decisive factor that governs the physical properties is the ratio between the electronic kinetic energy, which promotes delocalization over the lattice, and the Coulomb interaction, which instead favours localized electronic states. Due to this competition, correlated electronic systems can show unique and interesting properties like the Metal-Insulator transition, diverse phase diagrams, strong temperature dependence and in general a high sensitivity to the environmental conditions. A theoretical description of these systems is not an easy task, since perturbative approaches that do not preserve the competition between the kinetic and interaction terms can only be applied in special limiting cases. One of the most famous approaches to obtain the electronic properties of a real material is the ab initio density functional theory (DFT) method. It allows one to obtain the ground state density of the system under investigation by mapping onto an effective non-interacting system that has to be found self-consistently. While being an exact theory, in practical implementations certain approximations have to be made to the exchange-correlation potential. The local density approximation (LDA), which approximates the exchange-correlation contribution to the total energy by that of a homogeneous electron gas with the corresponding density, has proven quite successful in many cases. Though, this approximation in general leads to an underestimation of electronic correlations and is not able to describe a metal-insulator transition due to electronic localization in the presence of strong Coulomb interaction. A different approach to the interacting electronic problem is the dynamical mean-field theory (DMFT), which is non-perturbative in the kinetic and interaction term but neglects all non
Svozil, Daniel; Jungwirth, Pavel
2006-07-27
In the present study, the performance of six popular density functionals (B3LYP, PBE0, BLYP, BP86, PBE, and SVWN) for the description of the autoionization process in the water octamer was studied. As a benchmark, MP2 energies with complete basis sets limit extrapolation and CCSD(T) correction were used. At this level, the autoionized structure lies 28.5 kcal.mol(-1) above the neutral water octamer. Accounting for zero-point energy lowers this value by 3.0 kcal.mol(-1). The transition state of the proton transfer reaction, lying only 0.7 kcal.mol(-1) above the energy of the ionized system, was identified at the MP2/aug-cc-pVDZ level of theory. Different density functionals describe the reactant and product with varying accuracy, while they all fail to characterize the transition state. We find improved results with hybrid functionals compared to the gradient-corrected ones. In particular, B3LYP describes the reaction energetics within 2.5 kcal.mol(-1) of the benchmark value. Therefore, this functional is suggested to be preferably used both for Carr-Parinello molecular dynamics and for quantum mechanics/molecular mechanics (QM/MM) simulations of autoionization of water.
Electronic structure modeling of InAs/GaSb superlattices with hybrid density functional theory
Garwood, T.; Modine, N. A.; Krishna, S.
2017-03-01
The application of first-principles calculations holds promise for greatly improving our understanding of semiconductor superlattices. Developing a procedure to accurately predict band gaps using hybrid density functional theory lays the groundwork for future studies investigating more nuanced properties of these structures. Our approach allows a priori prediction of the properties of SLS structures using only the band gaps of the constituent materials. Furthermore, it should enable direct investigation of the effects of interface structure, e.g., intermixing or ordering at the interface, on SLS properties. In this paper, we present band gap data for various InAs/GaSb type-II superlattice structures calculated using the generalized Kohn-Sham formulation of density functional theory. A PBE0-type hybrid functional was used, and the portion of the exact exchange was tuned to fit the band gaps of the binary compounds InAs and GaSb with the best agreement to bulk experimental values obtained with 18% of the exact exchange. The heterostructures considered in this study are 6 monolayer (ML) InAs/6 ML GaSb, 8 ML InAs/8 ML GaSb and 10 ML InAs/10 ML GaSb with deviations from the experimental band gaps ranging from 3% to 11%.
Modelling excited states of weakly bound complexes with density functional theory.
Briggs, Edward A; Besley, Nicholas A
2014-07-28
The binding within the ethene-argon and formaldehyde-methane complexes in the ground and electronically excited states is studied with equation of motion coupled cluster theory (EOM-CCSD), second-order Møller-Plesset perturbation theory (MP2) and density functional theory with dispersion corrections (DFT-D). Electronically excited states are studied within MP2 and Kohn-Sham DFT formalisms by exploiting a procedure called the maximum overlap method that allows convergence of the relevant self-consistent field equations to higher energy (or excited state) solutions. Potential energy curves computed using MP2 are in good agreement with the EOM-CCSD calculations for both the valence and Rydberg excited states studied. For the DFT-D approach, B3LYP-D3/aug-cc-pVTZ calculations are found to be in agreement with EOM-CCSD for the ground and valence excited states. However, for the π3s Rydberg state of ethene-argon and the n3s Rydberg state of formaldehyde-methane significant deviation is observed, and this disagreement with EOM-CCSD is present for a variety of DFT-D based approaches. Variation of the parameters within the D2 dispersion correction results in closer agreement with EOM-CCSD for the Rydberg states but demonstrates that a different parameterisation from the ground state is required for these states. This indicates that time-dependent density functional theory calculations based upon a DFT-D reference may be satisfactory for excitations to valence states, but will potentially be inaccurate for excitations to Rydberg states, or more generally states where the nature of the electron density is significantly different from the ground state.
Matusewicz, M; Patrykiejew, A; Sokołowski, S; Pizio, O
2007-11-07
We propose a density functional theory to describe adsorption of Lennard-Jones fluid in slitlike pores modified by chain molecules. Specifically, the chains are bonded by their ends to the opposite pore walls, so they can form pillaredlike structure. Two models are studied. In the first model, the nonterminating segments of chains can change their configuration inside the pore upon adsorption of spherical species. In the second model, the chains configuration remains fixed, so that the system is similar to a nonuniform quenched-annealed mixture. We study capillary condensation of fluid species inside such modified pores and compare the results obtained for two models.
Theoretical modelling of photoactive molecular systems: insights using the Density Functional Theory
Ciofini, I.; Adamo, C. [Ecole Nationale Superieure de Chimie de Paris, Lab. d' Electrochimie et Chimie Analytique, CNRS UMR 7575, 75 - Paris (France); Laine, Ph.P. [Universite Rene-Descartes, Lab. de Chimie et Biochimie Pharmacologiques et Toxicologiques, CNRS UMR 8601, 75 - Paris (France); Bedioui, F. [Ecole Nationale Superieure de Chimie de Paris, Lab. de Pharmacologie Chimique et Genetique, CNRS FRE 2463 and INSERM U 640, 75 - Paris (France); Daul, C.A. [Fribourg Univ., Dept. de Chimie (Switzerland)
2006-02-15
An account of the performance of a modern and efficient approach to Density Functional Theory (DFT) for the prediction of the photophysical behavior of a series of Ru(II) and Os(II) complexes is given. The time-dependent-DFT method was used to interpret their electronic spectra. Two different types of compounds have been analyzed: (1) a complex undergoing a light induced isomerization of one of its coordination bonds; (2) an inorganic dyads expected to undergo intramolecular photoinduced electron transfer to form a charge separated (CS) sate. Besides the noticeable quantitative agreement between computed and experimental absorption spectra, our results allow to clarify, by first principles, both the nature of the excited states and the photochemical behavior of these complex systems, thus underlying the predictive character of the theoretical approach. (authors)
Johnson, Erin R; Salamone, Michela; Bietti, Massimo; DiLabio, Gino A
2013-02-07
Conventional density-functional theory (DFT) has the potential to overbind radical-molecule complexes because of erroneous charge transfer. We examined this behavior by exploring the ability of various DFT approximations to predict fractional charge transfer and by quantifying the overbinding in a series of complexes. It is demonstrated that too much charge is transferred from molecules to radicals when the radical singly unoccupied molecular orbitals are predicted to be erroneously too low in energy relative to the molecule highest occupied molecular orbitals, leading to excessive Coulombic attraction. In this respect, DFT methods formulated with little or no Hartree-Fock exchange perform most poorly. The present results illustrate that the charge-transfer problem is much broader than may have been previously expected and is not limited to conventional (i.e., molecule-molecule) donor-acceptor complexes.
The scaling functions of the free energy density and its derivatives for the 3d O(4) model
Engels, Juergen
2011-01-01
We derive direct representations of the scaling functions of the 3d O(4) model which are relevant for comparisons to other models, in particular QCD. This is done in terms of expansions in the scaling variable z= t/h^{1/Delta}. The expansions around z=0 and the corresponding asymptotic ones for z --> +- infinity overlap such that no interpolation is needed. The expansion coefficients are determined numerically from the data of a previous high statistics simulation of the O(4) model on a three-dimensional lattice of linear extension L=120. From the scaling function of the magnetization we calculate the leading asymptotic coefficients of the scaling function of the free energy density. As a result we obtain the universal amplitude ratio A^+/A^-=1.84(4) for the specific heat. Comparing the scaling function of the energy density to the data we find the non-singular part of the energy density epsilon_{ns}(T) with high precision and at the same time excellent scaling properties.
Density functional theory + U modeling of polarons in organohalide lead perovskites
Eric Welch
2016-12-01
Full Text Available We investigate the possible formation of polarons in four organic perovskites (CH3NH3PbI3, CH3NH3PbBr3, CH3NH3PbCl3, and CH3NH3PbI2Cl1 using a density functional theory (DFT calculations with local potentials and hybrid functionals. We show that DFT+U method with U = 8 eV predicts a correct band-gap and matches the forces on ions from hybrid calculations. We then use the DFT + U approach to study the effect of polarons, i.e. to search the configuration space and locate the lowest energy localized band gap state self-trapped hole (STH. STH configurations were found for three pure halides and one mixed halide system. Spin orbit coupling (SOC was also taken into account and the results may be found in the supplementary material. This study focuses on the +U method; however, SOC corrections added to the DFT+U calculations also resulted in STH states in all four systems.
Smith, Timothy; Lu, Xiaoyi; Ranjan, Reetesh; Pantano, Carlos
2016-11-01
We describe a two-way coupled turbulent dispersed flow computational model using a high-order kernel density function (KDF) method. The carrier-phase solution is obtained using a high-order spatial and temporal incompressible Navier-Stokes solver while the KDF dispersed-phase solver uses the high-order Legendre WENO method. The computational approach is used to model carrier-phase turbulence modulation by the dispersed phase, and particle dispersion by turbulence as a function of momentum coupling strength (particle loading) and number of KDF basis functions. The use of several KDF's allows the model to capture statistical effects of particle trajectory crossing to high degree. Details of the numerical implementation and the coupling between the incompressible flow and dispersed-phase solvers will be discussed, and results at a range of Reynolds numbers will be presented. This work was supported by the National Science Foundation under Grant DMS-1318161.
Ulian, Gianfranco; Valdrè, Giovanni
2015-07-01
Pyrophyllite has a significant role in both geophysics as a hydrous phase, which can recycle water into the Earth's mantle, and many industrial applications, such as petroleum and civil engineering. However, very few works have been proposed to fully characterize the thermodynamic properties of this mineral, especially at atomic scale. In the present work, we report structural, vibrational, thermochemical and thermophysical properties of pyrophyllite, calculated at the density functional theory level with the hybrid B3LYP functional, all-electron Gaussian-type orbitals and taking into account a correction to include dispersive forces. V( P, T) data at 300 K fit with isothermal third-order Birch-Murnaghan equations of state and yield K T 0 = 46.57 GPa, K' = 10.51 and V 0 = 213.67 Å3, where K T 0 is the thermal bulk modulus at 0 GPa, K' is the first derivative and V 0 is the volume at zero pressure, in very good agreement with recent experimental results obtained by in situ single-crystal synchrotron XRD. The compressional behaviour is highly anisotropic, with axial compressibility in ratio β( a):β( b):β( c) = 1.218:1.000:4.188. Pyrophyllite bulk modulus, thermal expansion coefficients and heat capacity at different P- T conditions are provided. The results of this kind of analysis can be useful in both geophysical and technological applications of the mineral and expand the high-temperature and high-pressure knowledge of this phase at physical conditions that are still difficult to obtain by experimental means. The simulated vibrational spectrum can also be used as a guideline by other authors in their experimental investigation of pyrophyllite.
Maitra, Neepa [Hunter College City University of New York, New York, NY (United States)
2016-07-14
This project investigates the accuracy of currently-used functionals in time-dependent density functional theory, which is today routinely used to predict and design materials and computationally model processes in solar energy conversion. The rigorously-based electron-ion dynamics method developed here sheds light on traditional methods and overcomes challenges those methods have. The fundamental research undertaken here is important for building reliable and practical methods for materials discovery. The ultimate goal is to use these tools for the computational design of new materials for solar cell devices of high efficiency.
An extended SMLD approach for presumed probability density function in flamelet combustion model
Coclite, Alessandro; De Palma, Pietro; Cutrone, Luigi
2013-01-01
This paper provides an extension of the standard flamelet progress variable (FPV) approach for turbulent combustion, applying the statistically most likely distribution (SMLD) framework to the joint PDF of the mixture fraction, Z, and the progress variable, C. In this way one does not need to make any assumption about the statistical correlation between Z and C and about the behaviour of the mixture fraction, as required in previous FPV models. In fact, for state-of-the-art models, with the assumption of very-fast-chemistry,Z is widely accepted to behave as a passive scalar characterized by a $\\beta$-distribution function. Instead, the model proposed here, evaluates the most probable joint distribution of Z and C without any assumption on their behaviour and provides an effective tool to verify the adequateness of widely used hypotheses, such as their statistical independence. The model is validated versus three well-known test cases, namely, the Sandia flames. The results are compared with those obtained by ...
Density Functionals of Chemical Bonding
Mihai V. Putz
2008-06-01
Full Text Available The behavior of electrons in general many-electronic systems throughout the density functionals of energy is reviewed. The basic physico-chemical concepts of density functional theory are employed to highlight the energy role in chemical structure while its extended influence in electronic localization function helps in chemical bonding understanding. In this context the energy functionals accompanied by electronic localization functions may provide a comprehensive description of the global-local levels electronic structures in general and of chemical bonds in special. Becke-Edgecombe and authorÃ¢Â€Â™s Markovian electronic localization functions are discussed at atomic, molecular and solid state levels. Then, the analytical survey of the main workable kinetic, exchange, and correlation density functionals within local and gradient density approximations is undertaken. The hierarchy of various energy functionals is formulated by employing both the parabolic and statistical correlation degree of them with the electronegativity and chemical hardness indices by means of quantitative structure-property relationship (QSPR analysis for basic atomic and molecular systems.
Functional responses modified by predator density
Kratina, P.; Vos, M.; Bateman, A.W.; Anholt, B.R.
2009-01-01
Realistic functional responses are required for accurate model predictions at the community level. However, controversy remains regarding which types of dependencies need to be included in functional response models. Several studies have shown an effect of very high predator densities on per capita
Gritsenko, O. V.; Rubio, A.; Balbás, L. C.; Alonso, J. A.
1993-03-01
The model Coulomb pair-correlation functions proposed several years ago by Gritsenko, Bagaturyants, Kazansky, and Zhidomirov are incorporated into the self-consistent local-density approximation (LDA) scheme for electronic systems. Different correlation functions satisfying well-established local boundary conditions and integral conditions have been tested by performing LDA calculations for closed-shell atoms. Those correlation functions contain a single parameter which can be optimized by fitting the atomic correlation energies to empirical data. In this way, a single (universal) value of the parameter is found to give a very good fit for all the atoms studied. The results provide a substantial improvement of calculated correlation energies as compared to the usual LDA functionals and the scheme should be useful for molecular and cluster calculations.
Karsch, Frithjof
2011-01-01
We present direct representations of the scaling functions of the 3d O(4) model which are relevant for comparisons to other models, in particular QCD. This is done in terms of expansions in the scaling variable z=t/h^{1/\\beta\\delta}. The expansions around z=0 and the corresponding asymptotic ones for z --> +/- infty, overlap such that no interpolation is needed. We explicitly present the expansion coefficients which have been determined numerically from data of a previous high statistics simulation of the O(4) model on a three-dimensional lattice of linear extension L=120. This allows to derive smooth representations of the first three derivatives of the scaling function of the free energy density, which determine universal properties of up to sixth order cumulants of net charge fluctuations in QCD.
Ab initio joint density-functional theory of solvated electrodes, with model and explicit solvation
Arias, Tomas
2015-03-01
First-principles guided design of improved electrochemical systems has the potential for great societal impact by making non-fossil-fuel systems economically viable. Potential applications include improvements in fuel-cells, solar-fuel systems (``artificial photosynthesis''), supercapacitors and batteries. Economical fuel-cell systems would enable zero-carbon footprint transportation, solar-fuel systems would directly convert sunlight and water into hydrogen fuel for such fuel-cell vehicles, supercapacitors would enable nearly full recovery of energy lost during vehicle braking thus extending electric vehicle range and acceptance, and economical high-capacity batteries would be central to mitigating the indeterminacy of renewable resources such as wind and solar. Central to the operation of all of the above electrochemical systems is the electrode-electrolyte interface, whose underlying physics is quite rich, yet remains remarkably poorly understood. The essential underlying technical challenge to the first principles studies which could explore this physics is the need to properly represent simultaneously both the interaction between electron-transfer events at the electrode, which demand a quantum mechanical description, and multiscale phenomena in the liquid environment such as the electrochemical double layer (ECDL) and its associated shielding, which demand a statistical description. A direct ab initio approach to this challenge would, in principle, require statistical sampling and thousands of repetitions of already computationally demanding quantum mechanical calculations. This talk will begin with a brief review of a recent advance, joint density-functional theory (JDFT), which allows for a fully rigorous and, in principle, exact representation of the thermodynamic equilibrium between a system described at the quantum-mechanical level and a liquid environment, but without the need for costly sampling. We then shall demonstrate how this approach applies in
Mami Mutoh
2015-12-01
Full Text Available The ternary interaction system composed of fluorinated ethylene carbonate, denoted by EC(F, lithium ion (Li+ and a model of nano-structured graphene has been investigated by means of the density functional theory (DFT method. For comparison, fluorinated vinylene carbonate, denoted by VC(F, was also used. The model of graphene consisting of 14 benzene rings was examined as a nano-structured graphene. The effects of fluorine substitution on the electronic state and binding energy were investigated from a theoretical point of view. It was found that both EC(F and VC(F bind to a hexagonal site corresponding to the central benzene ring of the model of the graphene surface. The binding energies of Li+EC(F and Li+VC(F to the model of graphene decreased with increasing number of fluorine atoms (n.
Stradi, Daniele; Martinez, Umberto; Blom, Anders
2016-01-01
this method to characterize an Ag/Si interface relevant for photovoltaic applications and study the rectifying-to-Ohmic transition as a function of the semiconductor doping. We also demonstrate that the standard “activation energy” method for the analysis of I-Vbias data might be inaccurate for nonideal...... interfaces as it neglects electron tunneling, and that finite-size atomistic models have problems in describing these interfaces in the presence of doping due to a poor representation of space-charge effects. Conversely, the present method deals effectively with both issues, thus representing a valid...
Jansík, Branislav; Rizzo, Antonio; Frediani, Luca; Ruud, Kenneth; Coriani, Sonia
2006-12-01
The magnetic-field-induced axial birefringence (magnetochirality) of five closed-shell chiral molecules (three substituted oxiranes, carvone, and limonene) is studied at the density functional theory level using Becke's 3-parameter Lee-Yang-Parr functional and frequency-dependent quadratic response theory. The influence of the environment and the conformational distribution on the property is also studied. The environment effects are described by the polarizable continuum model in its integral-equation formulation. The effect of the conformational distribution is investigated by performing calculations on several conformers—for carvone and limonene—followed by Boltzmann averaging. The calculated values for the magnetochiral birefringence are compared to previous ab initio results and experimental data where available. The refined model presented here brings the ab initio values closer to experiment. Still, disagreements remain in some cases and it appears difficult to resolve these discrepancies.
Maadooliat, Mehdi
2015-10-21
This paper develops a method for simultaneous estimation of density functions for a collection of populations of protein backbone angle pairs using a data-driven, shared basis that is constructed by bivariate spline functions defined on a triangulation of the bivariate domain. The circular nature of angular data is taken into account by imposing appropriate smoothness constraints across boundaries of the triangles. Maximum penalized likelihood is used to fit the model and an alternating blockwise Newton-type algorithm is developed for computation. A simulation study shows that the collective estimation approach is statistically more efficient than estimating the densities individually. The proposed method was used to estimate neighbor-dependent distributions of protein backbone dihedral angles (i.e., Ramachandran distributions). The estimated distributions were applied to protein loop modeling, one of the most challenging open problems in protein structure prediction, by feeding them into an angular-sampling-based loop structure prediction framework. Our estimated distributions compared favorably to the Ramachandran distributions estimated by fitting a hierarchical Dirichlet process model; and in particular, our distributions showed significant improvements on the hard cases where existing methods do not work well.
Quantal Density Functional Theory II
Sahni, Viraht
2009-01-01
Discusses approximation methods and applications of Quantal Density Functional Theory (QDFT), a local effective-potential-energy theory of electronic structure. This book describes approximations methods based on the incorporation of different electron correlations, as well as a many-body perturbation theory within the context of QDFT
Density functional theory/B3LYP has been employed to optimize the conformations of selected 4-arylflavan-3-ols and their phenolic methyl ether 3-O-acetates. The electronic circular dichroism spectra of the major conformers have been calculated using time-dependent density functional theory to valida...
Telesca, R.; Bolink, H.; Yunoki, S.; Hadziioannou, G.; Duijnen, P.Th. van; Snijders, J.G.; Jonkman, H.T.; Sawatzky, G.A.
2001-01-01
We present density-functional and time-dependent density-functional studies of the ground, ionic, and excited states of a series of oligomers of thiophene. We show that, for the physical properties, the most relevant highest occupied and lowest unoccupied molecular orbitals develop gradually from mo
Methane adsorption on the surface of a model of shale: A density functional theory study
Zhu, Yuan-qiang, E-mail: zhuline518@163.com [School of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu 610500 (China); State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500 (China); Su, Hong; Jing, Ya [School of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu 610500 (China); Guo, Jianchun [State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500 (China); Tang, Junlei [School of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu 610500 (China)
2016-11-30
Highlights: • The adsorption of methane on kerogen was investigated by DFT method with D3 dispersion correction. • Methane prefers to be adsorbed on the sites directly above the carbon atoms of the kerogen. • The interaction energy with BSSE corrections is around 14 kJ mol{sup −1}. • RDG gradient isosurface depicted the van der Waals interactions between methane and kerogen. • The adsorption of methane on kerogen slightly depends upon the adsorption sites on kerogen as well as the orientations of methane. - Abstract: As a model of shale, one part of polycyclic aromatic ring was used to represent the kerogen surface with the structural heterogeneity. The adsorption mechanisms of methane on the surface of the kerogen were investigated by M06-2× functional with D3 dispersion correction. Nine stable adsorption sites and the orientations of methane (CH{sub 4}) on the surface of the kerogen were systematically considered. Information from different methods lead to the same conclusion that methane prefers to be adsorbed on the sites directly above the carbon atoms of the kerogen rather than above the center of the six-membered rings. The interactions between methane and the surface of the kerogen are the van der Waals interactions. The interaction energies with the basis set superposition error (BSSE) corrections are around 14 kJ mol{sup −1} at the M06-2×-D3/Jun-cc-pVDZ level. The RDG scatter graphs and the RDG gradient isosurface further illustrate that the interactions between methane and the surface of the kerogen belong to the van der Waals interactions. The weak interactions indicate that the adsorption of methane on the surface of the kerogen is physical adsorption and it slightly depends upon the adsorption sites on kerogen as well as the orientations of methane. These results are helpful for the understanding of the microcosmic mechanism of methane–shale interactions and for the exploitation of shale gas.
Glossman, M. D.; Balbás, L. C.; Alonso, J. A.
1995-07-01
The radial electron density obtained for all the atoms of the main groups of the Periodic Table through the solution of the Euler equation associated with the nonlocal weighted density approximation (WDA) for the exchange and kinetic energy density functionals shows an incipient shell structure which is absent in other calculations using kinetic energy functionals based on the electronic density. The WDA radial density reveals two local maxima and the position of the first maximum correlates with the position of the maximum for the 1s orbital in the Hartree-Fock approximation. The cusp condition at the nucleus is fulfilled accurately. Also we study the density-based electron localization function (DELF) as a complementary procedure for the visualization of shells.
Amovilli, C., E-mail: amovilli@dcci.unipi.it [Dipartimento di Chimica e Chimica Industriale, Università di Pisa, Via Risorgimento 35, 56126 Pisa (Italy); March, N.H. [Department of Physics, University of Antwerp, Antwerp (Belgium); University of Oxford, Oxford (United Kingdom)
2014-05-01
Though density functional theory is already developed in useful practical numerical forms, no explicit simple ground-state energy density functional exists. Here, towards establishing such a theory, we present the ground-state energy of the Crandall et al.'s two-electron spin-compensated model atom in terms of ∇{sup 2}ρ(r)/ρ(r) evaluated at r=0, where ρ(r) is the electron density.
Amovilli, C.; March, N. H.
2014-05-01
Though density functional theory is already developed in useful practical numerical forms, no explicit simple ground-state energy density functional exists. Here, towards establishing such a theory, we present the ground-state energy of the Crandall et al.'s two-electron spin-compensated model atom in terms of ∇2ρ(r)/ρ(r) evaluated at r=0, where ρ(r) is the electron density.
Nishino, Asuka; Tajima, Yosuke; Takuwa, Hiroyuki; Masamoto, Kazuto; Taniguchi, Junko; Wakizaka, Hidekatsu; Kokuryo, Daisuke; Urushihata, Takuya; Aoki, Ichio; Kanno, Iwao; Tomita, Yutaka; Suzuki, Norihiro; Ikoma, Yoko; Ito, Hiroshi
2016-04-27
We investigated the chronic effects of cerebral hypoperfusion on neuronal density and functional hyperemia using our misery perfusion mouse model under unilateral common carotid artery occlusion (UCCAO). Neuronal density evaluated 28 days after UCCAO using [(11)C]flumazenil-PET and histology indicated no neurologic deficit in the hippocampus and neocortex. CBF response to sensory stimulation was assessed using laser-Doppler flowmetry. Percentage changes in CBF response of the ipsilateral hemisphere to UCCAO were 18.4 ± 3.0%, 6.9 ± 2.8%, 6.8 ± 2.3% and 4.9 ± 2.4% before, and 7, 14 and 28 days after UCCAO, respectively. Statistical significance was found at 7, 14 and 28 days after UCCAO (P < 0.01). Contrary to our previous finding (Tajima et al. 2014) showing recovered CBF response to hypercapnia on 28 days after UCCAO using the same model, functional hyperemia was sustained and became worse 28 days after UCCAO.
Nomura, K; Rodriguez-Guzman, R; Robledo, L M; Sarriguren, P
2010-01-01
Spectroscopic calculations are carried out, for the description of the shape/phase transition in Pt nuclei in terms of the Interacting Boson Model (IBM) Hamiltonian derived from (constrained) Hartree-Fock-Bogoliubov (HFB) calculations with the finite range and density dependent Gogny-D1S Energy Density Functional. Assuming that the many-nucleon driven dynamics of nuclear surface deformation can be simulated by effective bosonic degrees of freedom, the Gogny-D1S potential energy surface (PES) with quadrupole degrees of freedom is mapped onto the corresponding PES of the IBM. Using this mapping procedure, the parameters of the IBM Hamiltonian, relevant to the low-lying quadrupole collective states, are derived as functions of the number of valence nucleons. Merits of both Gogny-HFB and IBM approaches are utilized so that the spectra and the wave functions in the laboratory system are calculated precisely. The experimental low-lying spectra of both ground-state and side-band levels are well reproduced. From the ...
Tsoneva, N., E-mail: Nadia.Tsoneva@theo.physik.uni-giessen.de [Frankfurt Institute for Advanced Studies (FIAS) (Germany); Lenske, H. [Universität Gießen, Institut für Theoretische Physik (Germany)
2016-11-15
During the last decade, a theoretical method based on the energy–density functional theory and quasiparticle–phonon model, including up to three-phonon configurations was developed. The main advantages of themethod are that it incorporates a self-consistentmean-field and multi-configuration mixing which are found of crucial importance for systematic investigations of nuclear low-energy excitations, pygmy and giant resonances in an unified way. In particular, the theoretical approach has been proven to be very successful in predictions of new modes of excitations, namely pygmy quadrupole resonance which is also lately experimentally observed. Recently, our microscopically obtained dipole strength functions are implemented in predictions of nucleon-capture reaction rates of astrophysical importance. A comparison to available experimental data is discussed.
El-Mellouhi, Fadwa; Lucero, Melissa J; Scuseria, Gustavo E
2011-01-01
We have calculated the properties of SrTiO3 (STO) using a wide array of density functionals ranging from standard semi-local functionals to modern range-separated hybrids, combined with several basis sets of varying size/quality. We show how these combination's predictive ability varies signi?cantly, both for STO's cubic and antiferrodistortive (AFD) phases, with the greatest variation in functional/basis set e?cacy seen in modeling the AFD phase. The screened hybrid functionals we utilized predict the structural properties of both phases in very good agreement with experiment, especially if used with large (but still computationally tractable) basis sets. The most accurate results presented in this study, namely those from HSE06/modi?ed-def2-TZVP, stand as the most accurate modeling of STO to date when compared to the literature; these results agree well with experimental structural and electronic properties as well as providing insight into the band structure alteration during the phase transition.
Kim, Kyu Rang; Kim, Mijin; Choe, Ho-Seong; Han, Mae Ja; Lee, Hye-Rim; Oh, Jae-Won; Kim, Baek-Jo
2016-07-01
Pollen is an important cause of respiratory allergic reactions. As individual sanitation has improved, allergy risk has increased, and this trend is expected to continue due to climate change. Atmospheric pollen concentration is highly influenced by weather conditions. Regression analysis and modeling of the relationships between airborne pollen concentrations and weather conditions were performed to analyze and forecast pollen conditions. Traditionally, daily pollen concentration has been estimated using regression models that describe the relationships between observed pollen concentrations and weather conditions. These models were able to forecast daily concentrations at the sites of observation, but lacked broader spatial applicability beyond those sites. To overcome this limitation, an integrated modeling scheme was developed that is designed to represent the underlying processes of pollen production and distribution. A maximum potential for airborne pollen is first determined using the Weibull probability density function. Then, daily pollen concentration is estimated using multiple regression models. Daily risk grade levels are determined based on the risk criteria used in Korea. The mean percentages of agreement between the observed and estimated levels were 81.4-88.2 % and 92.5-98.5 % for oak and Japanese hop pollens, respectively. The new models estimated daily pollen risk more accurately than the original statistical models because of the newly integrated biological response curves. Although they overestimated seasonal mean concentration, they did not simulate all of the peak concentrations. This issue would be resolved by adding more variables that affect the prevalence and internal maturity of pollens.
Kim, Kyu Rang; Kim, Mijin; Choe, Ho-Seong; Han, Mae Ja; Lee, Hye-Rim; Oh, Jae-Won; Kim, Baek-Jo
2017-02-01
Pollen is an important cause of respiratory allergic reactions. As individual sanitation has improved, allergy risk has increased, and this trend is expected to continue due to climate change. Atmospheric pollen concentration is highly influenced by weather conditions. Regression analysis and modeling of the relationships between airborne pollen concentrations and weather conditions were performed to analyze and forecast pollen conditions. Traditionally, daily pollen concentration has been estimated using regression models that describe the relationships between observed pollen concentrations and weather conditions. These models were able to forecast daily concentrations at the sites of observation, but lacked broader spatial applicability beyond those sites. To overcome this limitation, an integrated modeling scheme was developed that is designed to represent the underlying processes of pollen production and distribution. A maximum potential for airborne pollen is first determined using the Weibull probability density function. Then, daily pollen concentration is estimated using multiple regression models. Daily risk grade levels are determined based on the risk criteria used in Korea. The mean percentages of agreement between the observed and estimated levels were 81.4-88.2 % and 92.5-98.5 % for oak and Japanese hop pollens, respectively. The new models estimated daily pollen risk more accurately than the original statistical models because of the newly integrated biological response curves. Although they overestimated seasonal mean concentration, they did not simulate all of the peak concentrations. This issue would be resolved by adding more variables that affect the prevalence and internal maturity of pollens.
Wang, Haifeng; Popov, Pavel; Hiremath, Varun; Lantz, Steven; Viswanathan, Sharadha; Pope, Stephen
2010-11-01
A large-eddy simulation (LES)/probability density function (PDF) code is developed and applied to the study of local extinction and re-ignition in Sandia Flame E. The modified Curl mixing model is used to account for the sub-filter scalar mixing; the ARM1 mechanism is used for the chemical reaction; and the in- situ adaptive tabulation (ISAT) algorithm is used to accelerate the chemistry calculations. Calculations are performed on different grids to study the resolution requirement for this flame. Then, with sufficient grid resolution, full-scale LES/PDF calculations are performed to study the flame characteristics and the turbulence-chemistry interactions. Sensitivity to the mixing frequency model is explored in order to understand the behavior of sub-filter scalar mixing in the context of LES. The simulation results are compared to the experimental data to demonstrate the capability of the code. Comparison is also made to previous RANS/PDF simulations.
National Aeronautics and Space Administration — This invention develops a mathematical model to describe battery behavior during individual discharge cycles as well as over its cycle life. The basis for the form...
Saha, Bhaskar (Inventor); Goebel, Kai F. (Inventor)
2012-01-01
This invention develops a mathematical model to describe battery behavior during individual discharge cycles as well as over its cycle life. The basis for the form of the model has been linked to the internal processes of the battery and validated using experimental data. Effects of temperature and load current have also been incorporated into the model. Subsequently, the model has been used in a Particle Filtering framework to make predictions of remaining useful life for individual discharge cycles as well as for cycle life. The prediction performance was found to be satisfactory as measured by performance metrics customized for prognostics for a sample case. The work presented here provides initial steps towards a comprehensive health management solution for energy storage devices.
Stopper, Daniel; Roth, Roland; Hansen-Goos, Hendrik
2016-11-01
Within the Asakura-Oosawa model, we study structural relaxation in mixtures of colloids and polymers subject to Brownian motion in the overdamped limit. We obtain the time evolution of the self and distinct parts of the van Hove distribution function G(r,t) by means of dynamical density functional theory (DDFT) using an accurate free-energy functional based on Rosenfeld’s fundamental measure theory. In order to remove unphysical interactions within the self part, we extend the recently proposed quenched functional framework (Stopper et al 2015 J. Chem. Phys. 143 181105) toward mixtures. In addition, we obtain results for the long-time self diffusion coefficients of colloids and polymers from dynamic Monte Carlo simulations, which we incorporate into the DDFT. From the resulting DDFT equations we calculate G(r, t), which we find to agree very well with our simulations. In particular, we examine the influence of polymers which are slow relative to the colloids—a scenario for which both DDFT and simulation show a significant peak forming at r = 0 in the colloid-colloid distribution function, akin to experimental findings involving gelation of colloidal suspensions. Moreover, we observe that, in the presence of slow polymers, the long-time self diffusivity of the colloids displays a maximum at an intermediate colloid packing fraction. This behavior is captured by a simple semi-empirical formula, which provides an excellent description of the data.
Koga, K; Widom, B
2016-06-22
We treat two different density-functional models of the structures and tensions of the interfaces between phases on approach to the tricritical point of three-phase equilibrium. The major objective is to account for some of the results of earlier experimental measurements of these tensions. The thermodynamic background is first reviewed, including representations of the properties near the critical endpoints and tricritical point and of the wetting transitions that may occur on approach to those critical points. The first of the models treated is analytically soluble. Its properties are illuminating but at the price of some artificiality paid for its analytical solubility. The second model, called model T, is in a class of those treated in the past and analyzed numerically. Some of its properties are obtained with sufficient precision to allow one to conclude with near certainty what the analytically exact results would be. This model, too, illuminates the experimental measurements. It is noted where its properties are in accord with those of the analytically soluble model and where the two differ.
Nishihara, S.; Otani, M.
2017-09-01
We present two hybrid solvation models for the calculation of the solvation structure with model 1 in a confined nanospace in bulk materials and model 2 at solid/liquid interfaces where an electrode is in contact with an electrolyte and a membrane is immersed into a solution. The hybrid theory is based on the reference interaction site method (RISM) for the solvent region. The electronic structure of a bulk material, an electrode, and a membrane is treated by density functional theory with the plane-wave basis and pseudopotentials technique. For model 1, we use the three-dimensional RISM (3D-RISM) by imposing a 3D periodic boundary condition on the system. However, for model 2, we reformulate the RISM by means of a two-dimensional boundary condition parallel to the surface and an open boundary condition normal to the surface. Four benchmark calculations are performed for the formaldehyde-water system, water packed into a zeolite framework, a NaCl solution in contact with an Al electrode, and an Al thin film immersed in a NaCl solution with different concentrations. The calculations are shown to be efficient and stable. Because of the flexibility of the RISM theory, the models are considered to be applicable to a wide range of solid/liquid interfaces.
Litchford, Ron J.; Jeng, San-Mou
1992-01-01
The performance of a recently introduced statistical transport model for turbulent particle dispersion is studied here for rigid particles injected into a round turbulent jet. Both uniform and isosceles triangle pdfs are used. The statistical sensitivity to parcel pdf shape is demonstrated.
Turan, Başak; Selçuki, Cenk
2014-09-01
Amino acids are constituents of proteins and enzymes which take part almost in all metabolic reactions. Glutamic acid, with an ability to form a negatively charged side chain, plays a major role in intra and intermolecular interactions of proteins, peptides, and enzymes. An exhaustive conformational analysis has been performed for all eight possible forms at B3LYP/cc-pVTZ level. All possible neutral, zwitterionic, protonated, and deprotonated forms of glutamic acid structures have been investigated in solution by using polarizable continuum model mimicking water as the solvent. Nine families based on the dihedral angles have been classified for eight glutamic acid forms. The electrostatic effects included in the solvent model usually stabilize the charged forms more. However, the stability of the zwitterionic form has been underestimated due to the lack of hydrogen bonding between the solute and solvent; therefore, it is observed that compact neutral glutamic acid structures are more stable in solution than they are in vacuum. Our calculations have shown that among all eight possible forms, some are not stable in solution and are immediately converted to other more stable forms. Comparison of isoelectronic glutamic acid forms indicated that one of the structures among possible zwitterionic and anionic forms may dominate over the other possible forms. Additional investigations using explicit solvent models are necessary to determine the stability of charged forms of glutamic acid in solution as our results clearly indicate that hydrogen bonding and its type have a major role in the structure and energy of conformers.
Brothers, Scott M; Darensbourg, Marcetta Y; Hall, Michael B
2011-09-05
The biochemical and physiological importance of nitric oxide (NO) in signaling and vasodilation has been studied for several decades. The discovery of both protein-bound and free low molecular weight dinitrosyl iron complexes (DNICs) suggests that such compounds might play roles in biological NO storage and transport. These complexes have important distinguishing spectroscopic features, including EPR and Mössbauer spectra, and NO vibrational frequencies (ν((NO))). The latter are particularly sensitive to modifications of the ligand environment and metal oxidation states. Examinations of functionals and basis sets delineate their effect on the NO vibrational frequencies and allow development of a methodology to calculate these frequencies in other DNICs. Three complexes of the form (L)(CO)Fe(NO)(2) (L = CO, N,N'-dimethyl-imidazol-2-ylidene (IMe) or 1-methylimidazole (MeImid)), where {Fe(NO)(2)}(10) is in its reduced form, have been used to calibrate the vibrational frequencies. The functional BP86 paired with a basis set of SDD/ECP on the metal and 6-311++G(d,p) on the ligand atoms exhibits the most accurate results, with deviations from experimental vibrational frequencies of no more than ±40 cm(-1). Subsequent investigations were performed on a series of diiron trinitrosyl complexes of the form {Fe(NO)}(7)-{Fe(NO)(2)}(9) bridged by sulfurs, namely, [(ON)Fe(μ-S,S-C(6)H(4))(2)Fe(NO)(2)](-), [Fe(NO)(2){Fe(NS(3))(NO)}-μ-S,S'], and [(ON)Fe(bme-dach)Fe(NO)(2)-μ-S,S'](+), with the ideal functional/basis set pair determined via the aforementioned test set. The ground state energetics (singlet/triplet/singlet, respectively), geometric parameters, and nitrosyl vibrational frequencies were calculated. The results for the former two complexes correlated well with the experimental work, and in contrast with what was reported in an earlier computational study, a stable triplet ground state structure was optimized for [Fe(NO)(2){Fe(NS(3))(NO)}-μ-S,S']. For [(ON
Density functional theory: Foundations reviewed
Kryachko, Eugene S., E-mail: eugene.kryachko@ulg.ac.be [Bogolyubov Institute for Theoretical Physics, Kiev, 03680 (Ukraine); Ludeña, Eduardo V., E-mail: popluabe@yahoo.es [Centro de Química, Instituto Venezolano de Investigaciones Científicas, IVIC, Apartado 21827, Caracas 1020-A (Venezuela, Bolivarian Republic of); Prometheus Program, Senescyt (Ecuador); Grupo Ecuatoriano para el Estudio Experimental y Teórico de Nanosistemas, GETNano, USFQ, N104-E, Quito (Ecuador); Escuela Politécnica Superior del Litoral, ESPOL, Guayaquil (Ecuador)
2014-11-10
Guided by the above motto (quotation), we review a broad range of issues lying at the foundations of Density Functional Theory, DFT, a theory which is currently omnipresent in our everyday computational study of atoms and molecules, solids and nano-materials, and which lies at the heart of modern many-body computational technologies. The key goal is to demonstrate that there are definitely the ways to improve DFT. We start by considering DFT in the larger context provided by reduced density matrix theory (RDMT) and natural orbital functional theory (NOFT), and examine the implications that N-representability conditions on the second-order reduced density matrix (2-RDM) have not only on RDMT and NOFT but, also, by extension, on the functionals of DFT. This examination is timely in view of the fact that necessary and sufficient N-representability conditions on the 2-RDM have recently been attained. In the second place, we review some problems appearing in the original formulation of the first Hohenberg–Kohn theorem which is still a subject of some controversy. In this vein we recall Lieb’s comment on this proof and the extension to this proof given by Pino et al. (2009), and in this context examine the conditions that must be met in order that the one-to-one correspondence between ground-state densities and external potentials remains valid for finite subspaces (namely, the subspaces where all Kohn–Sham solutions are obtained in practical applications). We also consider the issue of whether the Kohn–Sham equations can be derived from basic principles or whether they are postulated. We examine this problem in relation to ab initio DFT. The possibility of postulating arbitrary Kohn–Sham-type equations, where the effective potential is by definition some arbitrary mixture of local and non-local terms, is discussed. We also deal with the issue of whether there exists a universal functional, or whether one should advocate instead the construction of problem
Lv, Cun-Qin; Yang, Bo; Pang, Xian-Yong; Wang, Gui-Chang
2016-12-01
Understanding and controlling bond beak sequence is important in catalytic processes. The DFT-GGA method combined with slab model was performed to study the ethylene glycol decomposition on various Pt model catalysts such as close-packed Pt(111), stepped Pt(211) and a more open one, Pt(100). Calculation results show that the adsorption energies of ethylene glycol and other decomposition species depend on the coordination number of surface atom, that is, low coordination number correspond to high adsorption energy. Moreover, it was found that final products of ethylene glycol decomposition are CO and H2 on all model catalysts, but the reaction mechanism varies: On Pt(111), the first step is Osbnd H bond scission, followed by Csbnd H bond cleavage, namely C2H6O2 → HOCH2CH2O + H → HOCH2CHO + 2H→ HOCH2CO +3H → OCH2CO + 4H → OCHCO + 5H → CO + HCO + 5H → 2CO + 6H→ 2CO + 3H2; On Pt(211) and Pt(100), however, it is a second Osbnd H bond cleavage that follows the initial Osbnd H bond scission, that is, C2H6O2 → HOCH2CH2O + H → OCH2CH2O + 2H → OCHCH2O + 3H → OCHCHO + 4H → 2HCO + 4H → 2CO + 6H → 2CO + 3H2 on Pt(211), and C2H6O2 →HOCH2CH2O+ H → OCH2CH2O + 2H→OCHCH2O+3H→OCCH2O+4H→CO+H2CO+4H→CO+HCO+5H→2CO+6H→2CO+3H2 on Pt(100) For the catalytic order of ethylene glycol to form H2, it may be determined based on the rate-controlling step, and it is Pt(111) > Pt(211) > Pt(100).
Nobre, G P A; Escher, J E; Thompson, I J; Dupuis, M; Terasaki, J; Engel, J
2010-01-01
A microscopic calculation of the reaction cross-section for nucleon-nucleus scattering has been performed by explicitly coupling the elastic channel to all particle-hole (p-h) excitation states in the target and to all one-nucleon pickup channels. The p-h states may be regarded as doorway states through which the flux flows to more complicated configurations, and subsequently to long-lived compound nucleus resonances. Target excitations for 40,48Ca, 58Ni, 90Zr and 144Sm were described in a QRPA framework using a Skyrme functional. Reaction cross sections calculated in this approach were compared to predictions of a fitted optical potential and to experimental data, reaching very good agreement. Couplings between inelastic states were found to be negligible, while the couplings to pickup channels contribute significantly. For the first time observed reaction cross-sections are completely accounted for by explicit channel coupling, for incident energies between 10 and 40 MeV.
Yu-wei Zhou; Igor Ying Zhang; Jian-ming Wu; An-an Wu; Xin Xu
2011-01-01
Benzene dimer (bz2) is the simplest prototype of the π-π interactions.Such interactions are ubiquitous in diverse areas of science and molecular engineering.In the present work,we have made assessment on some modern density functional methods including B97-D,BLYP-D3,M06-2X,XYG3,and force field models including CHARMM,AMBER,MM3,AMOEBA on six important interaction modes of bz2.Our results not only highlight the usefulness of these cost-effective methods,which can be used as economic substitutes of the expensive CCSD(T) for complex real-world systems,but also indicate their weakness in the description of the π-π interactions,which points to the future direction for further improvements.
Nomura, K.; Rodríguez-Guzmán, R.; Robledo, L. M.
2017-07-01
Spectroscopic properties of odd-mass nuclei are studied within the framework of the interacting boson-fermion model (IBFM) with parameters based on the Hartree-Fock-Bogoliubov (HFB) approximation. The parametrization D1M of the Gogny energy density functional (EDF) was used at the mean-field level to obtain the deformation energy surfaces for the considered nuclei in terms of the quadrupole deformations (β ,γ ). In addition to the energy surfaces, both single-particle energies and occupation probabilities were used as a microscopic input for building the IBFM Hamiltonian. Only three strength parameters for the particle-boson-core coupling are fitted to experimental spectra. The IBFM Hamiltonian is then used to compute the energy spectra and electromagnetic transition rates for selected odd-mass Eu and Sm nuclei as well as for 195Pt and 195Au. A reasonable agreement with the available experimental data is obtained for the considered odd-mass nuclei.
Meštrić, H.; Eichel, R.-A.; Kloss, T.; Dinse, K.-P.; Laubach, So.; Laubach, St.; Schmidt, P. C.; Schönau, K. A.; Knapp, M.; Ehrenberg, H.
2005-04-01
The Fe3+ center in ferroelectric PbTiO3 together with an oxygen vacancy forms a charged defect associate, oriented along the crystallographic c axis. Its microscopic structure has been analyzed in detail comparing results from a semiempirical Newman superposition model analysis based on fine-structure data and from calculations using density functional theory. Both methods give evidence for a substitution of Fe3+ for Ti4+ as an acceptor center. The position of the iron ion in the ferroelectric phase is found to be similar to the B site in the paraelectric phase. Partial charge compensation is locally provided by a directly coordinated oxygen vacancy. Using high-resolution synchrotron powder diffraction, it was verified that lead titanate remains tetragonal down to 12K , exhibiting a c/a ratio of 1.0721.
A Density Functional Theory Study
Lim, XiaoZhi
2011-12-11
Complexes with pincer ligand moieties have garnered much attention in the past few decades. They have been shown to be highly active catalysts in several known transition metal-catalyzed organic reactions as well as some unprecedented organic transformations. At the same time, the use of computational organometallic chemistry to aid in the understanding of the mechanisms in organometallic catalysis for the development of improved catalysts is on the rise. While it was common in earlier studies to reduce computational cost by truncating donor group substituents on complexes such as tertbutyl or isopropyl groups to hydrogen or methyl groups, recent advancements in the processing capabilities of computer clusters and codes have streamlined the time required for calculations. As the full modeling of complexes become increasingly popular, a commonly overlooked aspect, especially in the case of complexes bearing isopropyl substituents, is the conformational analysis of complexes. Isopropyl groups generate a different conformer with each 120 ° rotation (rotamer), and it has been found that each rotamer typically resides in its own potential energy well in density functional theory studies. As a result, it can be challenging to select the most appropriate structure for a theoretical study, as the adjustment of isopropyl substituents from a higher-energy rotamer to the lowest-energy rotamer usually does not occur during structure optimization. In this report, the influence of the arrangement of isopropyl substituents in pincer complexes on calculated complex structure energies as well as a case study on the mechanism of the isomerization of an iPrPCP-Fe complex is covered. It was found that as many as 324 rotamers can be generated for a single complex, as in the case of an iPrPCP-Ni formato complex, with the energy difference between the global minimum and the highest local minimum being as large as 16.5 kcalmol-1. In the isomerization of a iPrPCP-Fe complex, it was found
Giura, Stefano; Schoen, Martin
2014-08-01
We consider the phase behavior of a simple model of a liquid crystal by means of modified mean-field density-functional theory (MMF DFT) and Monte Carlo simulations in the grand canonical ensemble (GCEMC). The pairwise additive interactions between liquid-crystal molecules are modeled via a Lennard-Jones potential in which the attractive contribution depends on the orientation of the molecules. We derive the form of this orientation dependence through an expansion in terms of rotational invariants. Our MMF DFT predicts two topologically different phase diagrams. At weak to intermediate coupling of the orientation dependent attraction, there is a discontinuous isotropic-nematic liquid-liquid phase transition in addition to the gas-isotropic liquid one. In the limit of strong coupling, the gas-isotropic liquid critical point is suppressed in favor of a fluid- (gas- or isotropic-) nematic phase transition which is always discontinuous. By considering three representative isotherms in parallel GCEMC simulations, we confirm the general topology of the phase diagram predicted by MMF DFT at intermediate coupling strength. From the combined MMF DFT-GCEMC approach, we conclude that the isotropic-nematic phase transition is very weakly first order, thus confirming earlier computer simulation results for the same model [see M. Greschek and M. Schoen, Phys. Rev. E 83, 011704 (2011), 10.1103/PhysRevE.83.011704].
Jian, Y; Yao, R; Mulnix, T; Jin, X; Carson, R E
2015-01-07
Resolution degradation in PET image reconstruction can be caused by inaccurate modeling of the physical factors in the acquisition process. Resolution modeling (RM) is a common technique that takes into account the resolution degrading factors in the system matrix. Our previous work has introduced a probability density function (PDF) method of deriving the resolution kernels from Monte Carlo simulation and parameterizing the LORs to reduce the number of kernels needed for image reconstruction. In addition, LOR-PDF allows different PDFs to be applied to LORs from different crystal layer pairs of the HRRT. In this study, a thorough test was performed with this new model (LOR-PDF) applied to two PET scanners-the HRRT and Focus-220. A more uniform resolution distribution was observed in point source reconstructions by replacing the spatially-invariant kernels with the spatially-variant LOR-PDF. Specifically, from the center to the edge of radial field of view (FOV) of the HRRT, the measured in-plane FWHMs of point sources in a warm background varied slightly from 1.7 mm to 1.9 mm in LOR-PDF reconstructions. In Minihot and contrast phantom reconstructions, LOR-PDF resulted in up to 9% higher contrast at any given noise level than image-space resolution model. LOR-PDF also has the advantage in performing crystal-layer-dependent resolution modeling. The contrast improvement by using LOR-PDF was verified statistically by replicate reconstructions. In addition, [(11)C]AFM rats imaged on the HRRT and [(11)C]PHNO rats imaged on the Focus-220 were utilized to demonstrated the advantage of the new model. Higher contrast between high-uptake regions of only a few millimeter diameter and the background was observed in LOR-PDF reconstruction than in other methods.
Scaled density functional theory correlation functionals.
Ghouri, Mohammed M; Singh, Saurabh; Ramachandran, B
2007-10-18
We show that a simple one-parameter scaling of the dynamical correlation energy estimated by the density functional theory (DFT) correlation functionals helps increase the overall accuracy for several local and nonlocal functionals. The approach taken here has been described as the "scaled dynamical correlation" (SDC) method [Ramachandran, J. Phys. Chem. A 2006, 110, 396], and its justification is the same as that of the scaled external correlation (SEC) method of Brown and Truhlar. We examine five local and five nonlocal (hybrid) DFT functionals, the latter group including three functionals developed specifically for kinetics by the Truhlar group. The optimum scale factors are obtained by use of a set of 98 data values consisting of molecules, ions, and transition states. The optimum scale factors, found with a linear regression relationship, are found to differ from unity with a high degree of correlation in nearly every case, indicating that the deviation of calculated results from the experimental values are systematic and proportional to the dynamic correlation energy. As a consequence, the SDC scaling of dynamical correlation decreases the mean errors (signed and unsigned) by significant amounts in an overwhelming majority of cases. These results indicate that there are gains to be realized from further parametrization of several popular exchange-correlation functionals.
Lopata, Kenneth; Govind, Niranjan
2011-05-10
The response of matter to external fields forms the basis for a vast wealth of fundamental physical processes ranging from light harvesting to nanoscale electron transport. Accurately modeling ultrafast electron dynamics in excited systems thus offers unparalleled insight but requires an inherently nonlinear time-resolved approach. To this end, an efficient and massively parallel real-time real-space time-dependent density functional theory (RT-TDDFT) implementation in NWChem is presented. The implementation is first validated against linear-response TDDFT and experimental results for a series of molecules subjected to small electric field perturbations. Second, nonlinear excitation of green fluorescent protein is studied, which shows a blue-shift in the spectrum with increasing perturbation, as well as a saturation in absorption. Next, the charge dynamics of optically excited zinc porphyrin is presented in real time and real space, with relevance to charge injection in photovoltaic devices. Finally, intermolecular excitation in an adenine-thymine base pair is studied using the BNL range separated functional [ Baer , R. ; Neuhauser , D. Phys. Rev. Lett. 2005 , 94 , 043002 ], demonstrating the utility of a real-time approach in capturing charge transfer processes.
Kong, Xiang-kai; Chen, Qian-wang
2013-08-21
The performance of N-doped graphene on Li-ion battery has been investigated systematically by means of a density functional theory method. Pyridinic N doping, graphitic N atoms and 5-8-5 double vacancies have been selected as the functional defects to study their influence on Li storage compared to the pristine graphene. It has been confirmed that introducing pyridinic N atoms with p-type doping is a suitable method, especially for graphene doped with 4 pyridinic N atoms, whose structural distortion induced by Li intercalation is small and supplies strong force for Li adsorption. The diffusion barrier for this model is lower than for pristine graphene, both for the side and center diffusion routes, contributing to the high mobility. In addition, we point out that the strong catch force for Li will cause more Li to stay on the pyridinic N-doped graphene during the charge-discharge cycles, leading to a faster decrease of capacity compared to pristine graphene.
Hofmann, Matthias
2009-09-01
[Mo(SSCH3)(S2C2(CH3)2)2](x) complexes with charges x between -3 and +3 were investigated by density functional theory computations as minimal nitrate reductase active-site models. The strongly reduced species (x = -2, -3) exist preferentially as pentacoordinate sulfo complexes separated from a thiolate anion. The oxidized extremes (x > 0) clearly prefer hexacoordinate complexes with an eta(2)-MeSS ligand. Among the neutral and especially for the singly negatively charged species structures with eta(2)-MeSS and eta(1)-MeSS ligands are energetically close to the sulfo methyl sulfide complex without SS bonding. For x = -1 the three isomers lie in a 1.5 kcal mol(-1) energy range. Putative mechanistic pathways for nitrate reduction from the literature were investigated computationally: (1) reduction at a pentacoordinate sulfo complex, (2) reduction at the ligand, and (3) reduction at the molybdenum center with an R-S-S ligand. All three pathways could be traced at least for some overall charges but no definite conclusion can be drawn about the mechanism. Complexes with larger dithiolato ligands were also computed in order to model the tricyclic metallopterin framework more accurately: the first heterocyclus (5,6-dihydro-2H-pyran) stabilizes the nitrate complex and the molybdenum oxo product complex by approximately 10 kcal mol(-1) and also reduces the activation barrier (by approximately 5 kcal mol(-1)). The effect of the second (1,2,3,4-tetrahydropyrazin) and third heterocyclus (2-amino-3H-pyrimidin-4-one) on the relative energies is relatively small. For bigger models derived from an experimental protein structure, nitrate reduction at a persulfo molybdenum(IV) complex fragment (mechanism 3) is clearly favored over the oxidation of a molybdenum-bound sulfur atom (mechanism 2). Mechanism 1 could not be investigated for the big models but seems the least favorable on the basis of the results from smaller models.
Kikuchi, Ryota; Misaka, Takashi; Obayashi, Shigeru, E-mail: rkikuchi@edge.ifs.tohoku.ac.jp [Institute of Fluid Science, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577 (Japan)
2015-10-15
An integrated method of a proper orthogonal decomposition based reduced-order model (ROM) and data assimilation is proposed for the real-time prediction of an unsteady flow field. In this paper, a particle filter (PF) and an ensemble Kalman filter (EnKF) are compared for data assimilation and the difference in the predicted flow fields is evaluated focusing on the probability density function (PDF) of the model variables. The proposed method is demonstrated using identical twin experiments of an unsteady flow field around a circular cylinder at the Reynolds number of 1000. The PF and EnKF are employed to estimate temporal coefficients of the ROM based on the observed velocity components in the wake of the circular cylinder. The prediction accuracy of ROM-PF is significantly better than that of ROM-EnKF due to the flexibility of PF for representing a PDF compared to EnKF. Furthermore, the proposed method reproduces the unsteady flow field several orders faster than the reference numerical simulation based on the Navier–Stokes equations. (paper)
Kikuchi, Ryota; Misaka, Takashi; Obayashi, Shigeru
2015-10-01
An integrated method of a proper orthogonal decomposition based reduced-order model (ROM) and data assimilation is proposed for the real-time prediction of an unsteady flow field. In this paper, a particle filter (PF) and an ensemble Kalman filter (EnKF) are compared for data assimilation and the difference in the predicted flow fields is evaluated focusing on the probability density function (PDF) of the model variables. The proposed method is demonstrated using identical twin experiments of an unsteady flow field around a circular cylinder at the Reynolds number of 1000. The PF and EnKF are employed to estimate temporal coefficients of the ROM based on the observed velocity components in the wake of the circular cylinder. The prediction accuracy of ROM-PF is significantly better than that of ROM-EnKF due to the flexibility of PF for representing a PDF compared to EnKF. Furthermore, the proposed method reproduces the unsteady flow field several orders faster than the reference numerical simulation based on the Navier-Stokes equations.
Kemler, Sandra; Braun, Jens
2016-01-01
In nuclear physics, Density Functional Theory (DFT) provides the basis for state-of-the art studies of ground-state properties of heavy nuclei. However, the direct relation of the density functional underlying these calculations and the microscopic nuclear forces is not yet fully understood. We present a combination of DFT and Renormalization Group (RG) techniques which allows to study selfbound many-body systems from microscopic interactions. We discuss its application with the aid of systems of identical fermions interacting via a long-range attractive and short-range repulsive two-body force in one dimension. We compute ground-state energies, intrinsic densities, and density correlation functions of these systems and compare our results to those obtained from other methods. In particular, we show how energies of excited states as well as the absolute square of the ground-state wave function can be extracted from the correlation functions within our approach. The relation between many-body perturbation theo...
Gebhardt, Julian; Viñes, Francesc; Bleiziffer, Patrick; Hieringer, Wolfgang; Görling, Andreas
2014-03-21
We investigate the capability of low-coordinated sites on small model clusters to act as active centers for hydrogen storage. A set of small magic clusters with the formula (XY)6 (X = Mg, Ba, Be, Zn, Cd, Na, Li, B and Y = O, Se, S, F, I, N) and a "drumlike" hexagonal shape showing a low coordination number of three was screened. Oxide clusters turned out to be the most promising candidates for hydrogen storage. For these ionic compounds we explored the suitability of different van der Waals (vdW) corrections to density-functional calculations by comparing the respective H2 physisorption profile to highly accurate CCSD(T) (Coupled Cluster Singles Doubles with perturbative Triples) calculations. The Grimme D3 vdW correction in combination with the Perdew-Burke-Ernzerhof exchange-correlation functional was found to be the best approach compared to CCSD(T) hydrogen physisorption profiles and is, therefore, suited to study these and other light metal oxide systems. H2 adsorption on sites of oxide model clusters is found to meet the adsorption energy criteria for H2 storage, with bond strengths ranging from 0.15 to 0.21 eV. Energy profiles and estimates of kinetic constants for the H2 splitting reaction reveal that H2 is likely to be adsorbed molecularly on sites of (MgO)6, (BaO)6, and (BeO)6 clusters, suggesting a rapid H2 uptake/release at operating temperatures and moderate pressures. The small mass of beryllium and magnesium makes such systems appealing for meeting the gravimetric criterion for H2 storage.
Deur, Killian; Mazouin, Laurent; Fromager, Emmanuel
2017-01-01
Ensemble density functional theory (eDFT) is an exact time-independent alternative to time-dependent DFT (TD-DFT) for the calculation of excitation energies. Despite its formal simplicity and advantages in contrast to TD-DFT (multiple excitations, for example, can be easily taken into account in an ensemble), eDFT is not standard, which is essentially due to the lack of reliable approximate exchange-correlation (x c ) functionals for ensembles. Following Smith et al. [Phys. Rev. B 93, 245131 (2016), 10.1103/PhysRevB.93.245131], we propose in this work to construct an exact eDFT for the nontrivial asymmetric Hubbard dimer, thus providing more insight into the weight dependence of the ensemble x c energy in various correlation regimes. For that purpose, an exact analytical expression for the weight-dependent ensemble exchange energy has been derived. The complementary exact ensemble correlation energy has been computed by means of Legendre-Fenchel transforms. Interesting features like discontinuities in the ensemble x c potential in the strongly correlated limit have been rationalized by means of a generalized adiabatic connection formalism. Finally, functional-driven errors induced by ground-state density-functional approximations have been studied. In the strictly symmetric case or in the weakly correlated regime, combining ensemble exact exchange with ground-state correlation functionals gives better ensemble energies than when calculated with the ground-state exchange-correlation functional. However, when approaching the asymmetric equiensemble in the strongly correlated regime, the former approximation leads to highly curved ensemble energies with negative slope which is unphysical. Using both ground-state exchange and correlation functionals gives much better results in that case. In fact, exact ensemble energies are almost recovered in some density domains. The analysis of density-driven errors is left for future work.
Wang, Ya; Chen, Jingwen; Wei, Xiaoxuan; Hernandez Maldonado, Arturo J; Chen, Zhongfang
2017-10-02
Predicting adsorption of organic pollutants onto carbon nanomaterials (CNMs) and understanding the adsorption mechanisms are of great importance to assess the environmental behavior and ecological risks of organic pollutants and CNMs. By means of density functional theory (DFT) computations, we investigated the adsorption of 38 organic molecules (aliphatic hydrocarbons, benzene and its derivatives, and polycyclic aromatic hydrocarbons) onto pristine graphene in both gaseous and aqueous phases. Polyparameter linear free energy relationships (pp-LFERs) were developed, which can be employed to predict adsorption energies of aliphatic and aromatic hydrocarbons on graphene. Based on the pp-LFERs, contributions of different interactions to the overall adsorption were estimated. As suggested by the pp-LFERs, the gaseous adsorption energies are mainly governed by dispersion and electrostatic interactions, while the aqueous adsorption energies are mainly determined by dispersion and hydrophobic interactions. It was also revealed that curvature of single-walled carbon nanotubes (SWNTs) exhibits more significant effects than the electronic properties (metallic or semiconducting) on gaseous adsorption energies, and graphene has stronger adsorption abilities than SWNTs. The developed models may pave a promising way for predicting adsorption of environmental chemicals onto CNMs with in silico techniques.
Wang, Liming; Lv, Guowen
2010-01-01
The standard gas-phase enthalpies of formation of polychlorinated naphthalenes (PCNs) have been predicted using G3X model chemistry, density functional theory (DFT), and second-order Muller-Plesset (MP2) theory. Two isodesmic reactions are used for better prediction of formation enthalpies. The first (IR1) employs chlorobenzene as a reference species and the second (IR2) employs polychlorinated benzenes as reference species. Among congeners, PCNs with simultaneous Cl-substitutions at positions 1 and 8 or 4 and 5 are the least stable, where the strong repulsion between Cl-atoms leads to non-planar structures for a few PCNs. The potential energy curves for ring-wagging motions in 1,8- or 4,5-PCNs are also extremely flat in the vicinity of equilibrium conformations, leading to extremely low harmonic frequencies for the ring-wagging modes. The contributions of these ring-wagging modes to entropy, heat capacity, and thermal corrections have been calculated using the numerically evaluated energy levels. The PCN isomer patterns are discussed based on the calculated Gibbs free energies.
SantiagoLain; RicardoAliod
2000-01-01
A statistical formalism overcoming some conceptual and practical difficulties arising in existing two-phase flow (2PHF) mathematical modelling has been applied to propose a model for dilute 2PHF turbulent flows.Phase interaction terms with a clear physical meaning enter the equations and the formalism provides some guidelines for the avoidance of closure assumptions or the rational approximation of these terms. Continuous phase averaged continuity, momentum, turbulent kinetic energy and turbulence dissipation rate equations have been rigorously and systematically obtained in a single step. These equations display a structure similar to that for single-phase flows.It is also assumed that dispersed phase dynamics is well described by a probability density function (pdf) equation and Eulerian continuity, momentum and fluctuating kinetic energy equations for the dispersed phase are deduced.An extension of the standard k-c turbulence model for the continuous phase is used. A gradient transport model is adopted for the dispersed phase fluctuating fluxes of momentum and kinetic energy at the non-colliding, large inertia limit. This model is then used to predict the behaviour of three axisymmetric turbulent jets of air laden with solid particles varying in size and concentration. Qualitative and quantitative numerical predictions compare reasonably well with the three different sets of experimental results, studying the influence of particle size, loading ratio and flow confinement velocity.
Khvostichenko, Daria; Choi, Andrew; Boulatov, Roman
2008-04-24
We investigated the effect of several computational variables, including the choice of the basis set, application of symmetry constraints, and zero-point energy (ZPE) corrections, on the structural parameters and predicted ground electronic state of model 5-coordinate hemes (iron(II) porphines axially coordinated by a single imidazole or 2-methylimidazole). We studied the performance of B3LYP and B3PW91 with eight Pople-style basis sets (up to 6-311+G*) and B97-1, OLYP, and TPSS functionals with 6-31G and 6-31G* basis sets. Only hybrid functionals B3LYP, B3PW91, and B97-1 reproduced the quintet ground state of the model hemes. With a given functional, the choice of the basis set caused up to 2.7 kcal/mol variation of the quintet-triplet electronic energy gap (DeltaEel), in several cases, resulting in the inversion of the sign of DeltaEel. Single-point energy calculations with triple-zeta basis sets of the Pople (up to 6-311G++(2d,2p)), Ahlrichs (TZVP and TZVPP), and Dunning (cc-pVTZ) families showed the same trend. The zero-point energy of the quintet state was approximately 1 kcal/mol lower than that of the triplet, and accounting for ZPE corrections was crucial for establishing the ground state if the electronic energy of the triplet state was approximately 1 kcal/mol less than that of the quintet. Within a given model chemistry, effects of symmetry constraints and of a "tense" structure of the iron porphine fragment coordinated to 2-methylimidazole on DeltaEel were limited to 0.3 kcal/mol. For both model hemes the best agreement with crystallographic structural data was achieved with small 6-31G and 6-31G* basis sets. Deviation of the computed frequency of the Fe-Im stretching mode from the experimental value with the basis set decreased in the order: nonaugmented basis sets, basis sets with polarization functions, and basis sets with polarization and diffuse functions. Contraction of Pople-style basis sets (double-zeta or triple-zeta) affected the results
Multiconfiguration Pair-Density Functional Theory.
Li Manni, Giovanni; Carlson, Rebecca K; Luo, Sijie; Ma, Dongxia; Olsen, Jeppe; Truhlar, Donald G; Gagliardi, Laura
2014-09-09
We present a new theoretical framework, called Multiconfiguration Pair-Density Functional Theory (MC-PDFT), which combines multiconfigurational wave functions with a generalization of density functional theory (DFT). A multiconfigurational self-consistent-field (MCSCF) wave function with correct spin and space symmetry is used to compute the total electronic density, its gradient, the on-top pair density, and the kinetic and Coulomb contributions to the total electronic energy. We then use a functional of the total density, its gradient, and the on-top pair density to calculate the remaining part of the energy, which we call the on-top-density-functional energy in contrast to the exchange-correlation energy of Kohn-Sham DFT. Because the on-top pair density is an element of the two-particle density matrix, this goes beyond the Hohenberg-Kohn theorem that refers only to the one-particle density. To illustrate the theory, we obtain first approximations to the required new type of density functionals by translating conventional density functionals of the spin densities using a simple prescription, and we perform post-SCF density functional calculations using the total density, density gradient, and on-top pair density from the MCSCF calculations. Double counting of dynamic correlation or exchange does not occur because the MCSCF energy is not used. The theory is illustrated by applications to the bond energies and potential energy curves of H2, N2, F2, CaO, Cr2, and NiCl and the electronic excitation energies of Be, C, N, N(+), O, O(+), Sc(+), Mn, Co, Mo, Ru, N2, HCHO, C4H6, c-C5H6, and pyrazine. The method presented has a computational cost and scaling similar to MCSCF, but a quantitative accuracy, even with the present first approximations to the new types of density functionals, that is comparable to much more expensive multireference perturbation theory methods.
Dodd, Amanda B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Larsen, Marvin E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2014-09-01
TDI foams of nominal density from 10 to 45 pound per cubic foot were decomposed within a heated stainless steel container. The pressure in the container and temperatures measured by thermocouples were recorded with each test proceeding to an allowed maximum pressure before venting. Two replicate tests for each of four densities and two orientations in gravity produced very consistent pressure histories. Some thermal responses demonstrate random sudden temperature increases due to decomposition product movement. The pressurization of the container due to the generation of gaseous products is more rapid for denser foams. When heating in the inverted orientation, where gravity is in the opposite direction of the applied heat flux, the liquefied decomposition products move towards the heated plate and the pressure rises more rapidly than in the upright configuration. This effect is present at all the densities tested but becomes more pronounced as density of the foam is decreased. A thermochemical material model implemented in a transient conduction model solved with the finite element method was compared to the test data. The expected uncertainty of the model was estimated using the mean value method and importance factors for the uncertain parameters were estimated. The model that was assessed does not consider the effect of liquefaction or movement of gases. The result of the comparison is that the model uncertainty estimates do not account for the variation in orientation (no gravitational affects are in the model) and therefore the pressure predictions are not distinguishable due to orientation. Temperature predictions were generally in good agreement with the experimental data. Predictions for response locations on the outside of the can benefit from reliable estimates associated with conduction in the metal. For the lighter foams, temperatures measured on the embedded component fall well with the estimated uncertainty intervals indicating the energy transport
Oettel, M; Dorosz, S; Berghoff, M; Nestler, B; Schilling, T
2012-08-01
In materials science the phase-field crystal approach has become popular to model crystallization processes. Phase-field crystal models are in essence Landau-Ginzburg-type models, which should be derivable from the underlying microscopic description of the system in question. We present a study on classical density functional theory in three stages of approximation leading to a specific phase-field crystal model, and we discuss the limits of applicability of the models that result from these approximations. As a test system we have chosen the three-dimensional suspension of monodisperse hard spheres. The levels of density functional theory that we discuss are fundamental measure theory, a second-order Taylor expansion thereof, and a minimal phase-field crystal model. We have computed coexistence densities, vacancy concentrations in the crystalline phase, interfacial tensions, and interfacial order parameter profiles, and we compare these quantities to simulation results. We also suggest a procedure to fit the free parameters of the phase-field crystal model. Thereby it turns out that the order parameter of the phase-field crystal model is more consistent with a smeared density field (shifted and rescaled) than with the shifted and rescaled density itself. In brief, we conclude that fundamental measure theory is very accurate and can serve as a benchmark for the other theories. Taylor expansion strongly affects free energies, surface tensions, and vacancy concentrations. Furthermore it is phenomenologically misleading to interpret the phase-field crystal model as stemming directly from Taylor-expanded density functional theory.
Gedanken Densities and Exact Constraints in Density Functional Theory
Perdew, John P; Sun, Jianwei; Burke, Kieron
2014-01-01
Approximations to the exact density functional for the exchange-correlation energy of a many-electron ground state can be constructed by satisfying constraints that are universal, i.e., valid for all electron densities. Gedanken densities are designed for the purpose of this construction, but need not be realistic. The uniform electron gas is an old gedanken density. Here, we propose a spherical two-electron gedanken density in which the dimensionless density gradient can be an arbitrary positive constant wherever the density is non-zero. The Lieb-Oxford lower bound on the exchange energy can be satisfied within a generalized gradient approximation (GGA) by bounding its enhancement factor or simplest GGA exchange-energy density. This enhancement-factor bound is well known to be sufficient, but our gedanken density shows that it is also necessary. The conventional exact exchange-energy density satisfies no such local bound, but energy densities are not unique, and the simplest GGA exchange-energy density is no...
Lee, T.; Boland, D. F., Jr.
1980-01-01
This document presents the results of an extensive survey and comparative evaluation of current atmosphere and wind models for inclusion in the Langley Atmospheric Information Retrieval System (LAIRS). It includes recommended models for use in LAIRS, estimated accuracies for the recommended models, and functional specifications for the development of LAIRS.
Extended screened exchange functional derived from transcorrelated density functional theory
Umezawa, Naoto
2017-09-01
We propose a new formulation of the correlation energy functional derived from the transcorrelated method in use in density functional theory (TC-DFT). An effective Hamiltonian, HTC, is introduced by a similarity transformation of a many-body Hamiltonian, H , with respect to a complex function F: HTC=1/F H F . It is proved that an expectation value of HTC for a normalized single Slater determinant, Dn, corresponds to the total energy: E [n ] = ⟨Ψn|H |Ψn ⟩ /⟨Ψn|Ψn ⟩ = ⟨Dn|HTC|Dn ⟩ under the two assumptions: (1) The electron density n (r ) associated with a trial wave function Ψn = DnF is v -representable and (2) Ψn and Dn give rise to the same electron density n (r ). This formulation, therefore, provides an alternative expression of the total energy that is useful for the development of novel correlation energy functionals. By substituting a specific function for F, we successfully derived a model correlation energy functional, which resembles the functional form of the screened exchange method. The proposed functional, named the extended screened exchange (ESX) functional, is described within two-body integrals and is parametrized for a numerically exact correlation energy of the homogeneous electron gas. The ESX functional does not contain any ingredients of (semi-)local functionals and thus is totally free from self-interactions. The computational cost for solving the self-consistent-field equation is comparable to that of the Hartree-Fock method. We apply the ESX functional to electronic structure calculations for a solid silicon, H- ion, and small atoms. The results demonstrate that the TC-DFT formulation is promising for the systematic improvement of the correlation energy functional.
Bayesian mixture models for spectral density estimation
Cadonna, Annalisa
2017-01-01
We introduce a novel Bayesian modeling approach to spectral density estimation for multiple time series. Considering first the case of non-stationary timeseries, the log-periodogram of each series is modeled as a mixture of Gaussiandistributions with frequency-dependent weights and mean functions. The implied model for the log-spectral density is a mixture of linear mean functionswith frequency-dependent weights. The mixture weights are built throughsuccessive differences of a logit-normal di...
Joubert, Daniel P.
2012-03-01
It is shown that the density-functional-theory exchange and correlation functionals satisfy 0=γEhx[ρN]+2Ecγ[ρN]-γEhx[ρN-1γ]-2Ecγ[ρN-1γ]+2∫d3r'[ρN-10(r)-ρN-1γ(r)]v0([ρN];r)+∫d3r'[ρN-10(r)-ρN-1γ(r)]r·∇v0([ρN];r)+∫d3r'ρN(r)r·∇vcγ([ρN];r)-∫d3r'ρN-1γ(r)r·∇vcγ([ρN-1γ];r)-∫d3r'fγ(r)r·∇vhxcγ([ρN];r)-2∫d3r'fγ(r)vhxcγ([ρN];r). In the derivation of this equation the adiabatic connection formulation is used, where the ground-state density of an N-electron system ρN is kept constant independent of the electron-electron coupling strength γ. Here Ehx[ρ] is the Hartree plus exchange energy, Ecγ[ρ] is the correlation energy, vhxcγ[ρ] is the Hartree plus exchange-correlation potential, vc[ρ] is the correlation potential, and v0[ρ]is the Kohn-Sham potential. The charge densities ρN and ρN-1γ are the N- and (N-1)-electron ground-state densities of the same Hamiltonian at electron-electron coupling strength γ. fγ(r)=ρN(r)-ρN-1γ(r) is the Fukui function. This equation can be useful in testing the internal self-consistency of approximations to the exchange and correlation functionals. As an example the identity is tested on the analytical Hooke's atom charge density for some frequently used approximate functionals.
Combinatorial nuclear level-density model
Moller, Peter [Los Alamos National Laboratory; Aberg, Sven [LUND SWEDEN; Uhrenhoit, Henrik [LUND SWEDEN; Ickhikawa, Takatoshi [RIKEN
2008-01-01
A microscopic nuclear level-density model is presented. The model is a completely combinatorial (micro-canonical) model based on the folded-Yukawa single-particle potential and includes explicit treatment of pairing, rotational and vibrational states. The microscopic character of all states enables extraction of level distribution functions with respect to pairing gaps, parity and angular momentum. The results of the model are compared to available experimental data: neutron separation energy level spacings, data on total level-density functions from the Oslo method and data on parity ratios.
Density functional theory in quantum chemistry
Tsuneda, Takao
2014-01-01
This book examines density functional theory based on the foundation of quantum chemistry. Unconventional in approach, it reviews basic concepts, then describes the physical meanings of state-of-the-art exchange-correlation functionals and their corrections.
A multiconfigurational hybrid density-functional theory
Sharkas, Kamal; Savin, Andreas; Jensen, Hans Jørgen Aagaard
2012-01-01
We propose a multiconfigurational hybrid density-functional theory which rigorously combines a multiconfiguration self-consistent-field calculation with a density-functional approximation based on a linear decomposition of the electron-electron interaction. This gives a straightforward extension ...
A multiconfigurational hybrid density-functional theory
Sharkas, Kamal; Savin, Andreas; Jensen, Hans Jørgen Aagaard
2012-01-01
We propose a multiconfigurational hybrid density-functional theory which rigorously combines a multiconfiguration self-consistent-field calculation with a density-functional approximation based on a linear decomposition of the electron-electron interaction. This gives a straightforward extension ...
Yokogawa, D.
2016-09-01
Theoretical approach to design bright bio-imaging molecules is one of the most progressing ones. However, because of the system size and computational accuracy, the number of theoretical studies is limited to our knowledge. To overcome the difficulties, we developed a new method based on reference interaction site model self-consistent field explicitly including spatial electron density distribution and time-dependent density functional theory. We applied it to the calculation of indole and 5-cyanoindole at ground and excited states in gas and solution phases. The changes in the optimized geometries were clearly explained with resonance structures and the Stokes shift was correctly reproduced.
Magnetic fields and density functional theory
Salsbury Jr., Freddie [Univ. of California, Berkeley, CA (United States)
1999-02-01
A major focus of this dissertation is the development of functionals for the magnetic susceptibility and the chemical shielding within the context of magnetic field density functional theory (BDFT). These functionals depend on the electron density in the absence of the field, which is unlike any other treatment of these responses. There have been several advances made within this theory. The first of which is the development of local density functionals for chemical shieldings and magnetic susceptibilities. There are the first such functionals ever proposed. These parameters have been studied by constructing functionals for the current density and then using the Biot-Savart equations to obtain the responses. In order to examine the advantages and disadvantages of the local functionals, they were tested numerically on some small molecules.
Pribram-Jones, Aurora
Warm dense matter (WDM) is a high energy phase between solids and plasmas, with characteristics of both. It is present in the centers of giant planets, within the earth's core, and on the path to ignition of inertial confinement fusion. The high temperatures and pressures of warm dense matter lead to complications in its simulation, as both classical and quantum effects must be included. One of the most successful simulation methods is density functional theory-molecular dynamics (DFT-MD). Despite great success in a diverse array of applications, DFT-MD remains computationally expensive and it neglects the explicit temperature dependence of electron-electron interactions known to exist within exact DFT. Finite-temperature density functional theory (FT DFT) is an extension of the wildly successful ground-state DFT formalism via thermal ensembles, broadening its quantum mechanical treatment of electrons to include systems at non-zero temperatures. Exact mathematical conditions have been used to predict the behavior of approximations in limiting conditions and to connect FT DFT to the ground-state theory. An introduction to FT DFT is given within the context of ensemble DFT and the larger field of DFT is discussed for context. Ensemble DFT is used to describe ensembles of ground-state and excited systems. Exact conditions in ensemble DFT and the performance of approximations depend on ensemble weights. Using an inversion method, exact Kohn-Sham ensemble potentials are found and compared to approximations. The symmetry eigenstate Hartree-exchange approximation is in good agreement with exact calculations because of its inclusion of an ensemble derivative discontinuity. Since ensemble weights in FT DFT are temperature-dependent Fermi weights, this insight may help develop approximations well-suited to both ground-state and FT DFT. A novel, highly efficient approach to free energy calculations, finite-temperature potential functional theory, is derived, which has the
Eljarrat, Alberto; Sastre, Xavier; Peiró, Francesca; Estradé, Sónia
2016-06-01
In the present work, the dielectric response of III-nitride semiconductors is studied using density functional theory (DFT) band structure calculations. The aim of this study is to improve our understanding of the features in the low-loss electron energy-loss spectra of ternary alloys, but the results are also relevant to optical and UV spectroscopy results. In addition, the dependence of the most remarkable features with composition is tested, i.e. applying Vegard's law to band gap and plasmon energy. For this purpose, three wurtzite ternary alloys, from the combination of binaries AlN, GaN, and InN, were simulated through a wide compositional range (i.e., Al x Ga1-x N, In x Al1-x N, and In x Ga1-x N, with x=[0,1]). For this DFT calculations, the standard tools found in Wien2k software were used. In order to improve the band structure description of these semiconductor compounds, the modified Becke-Johnson exchange-correlation potential was also used. Results from these calculations are presented, including band structure, density of states, and complex dielectric function for the whole compositional range. Larger, closer to experimental values, band gap energies are predicted using the novel potential, when compared with standard generalized gradient approximation. Moreover, a detailed analysis of the collective excitation features in the dielectric response reveals their compositional dependence, which sometimes departs from a linear behavior (bowing). Finally, an advantageous method for measuring the plasmon energy dependence from these calculations is explained.
Kapoor, Varun; Brics, Martins; Bauer, Dieter [Institut fuer Physik, Universitaet Rostock, 18051 Rostock (Germany)
2013-07-01
Autoionizing states are inaccessible to time-dependent density functional theory (TDDFT) using known, adiabatic Kohn-Sham (KS) potentials. We determine the exact KS potential for a numerically exactly solvable model Helium atom interacting with a laser field that is populating an autoionizing state. The exact single-particle density of the population in the autoionizing state corresponds to that of the energetically lowest quasi-stationary state in the exact KS potential. We describe how this exact potential controls the decay by a barrier whose height and width allows for the density to tunnel out and decay with the same rate as in the ab initio time-dependent Schroedinger calculation. However, devising a useful exchange-correlation potential that is capable of governing such a scenario in general and in more complex systems is hopeless. As an improvement over TDDFT, time-dependent reduced density matrix functional theory has been proposed. We are able to obtain for the above described autoionization process the exact time-dependent natural orbitals (i.e., the eigenfunctions of the exact, time-dependent one-body reduced density matrix) and study the potentials that appear in the equations of motion for the natural orbitals and the structure of the two-body density matrix expanded in them.
Covariant density functional theory for nuclear matter
Badarch, U.
2007-07-01
The present thesis is organized as follows. In Chapter 2 we study the Nucleon-Nucleon (NN) interaction in Dirac-Brueckner (DB) approach. We start by considering the NN interaction in free-space in terms of the Bethe-Salpeter (BS) equation to the meson exchange potential model. Then we present the DB approach for nuclear matter by extending the BS equation for the in-medium NN interaction. From the solution of the three-dimensional in-medium BS equation, we derive the DB self-energies and total binding energy which are the main results of the DB approach, which we later incorporate in the field theoretical calculation of the nuclear equation of state. In Chapter 3, we introduce the basic concepts of density functional theory in the context of Quantum Hadrodynamics (QHD-I). We reach the main point of this work in Chapter 4 where we introduce the DDRH approach. In the DDRH theory, the medium dependence of the meson-nucleon vertices is expressed as functionals of the baryon field operators. Because of the complexities of the operator-valued functionals we decide to use the mean-field approximation. In Chapter 5, we contrast microscopic and phenomenological approaches to extracting density dependent meson-baryon vertices. Chapter 6 gives the results of our studies of the EOS of infinite nuclear matter in detail. Using formulas derived in Chapters 4 and 5 we calculate the properties of symmetric and asymmetric nuclear matter and pure neutron matter. (orig.)
A Tryst With Density: Walter Kohn and Density Functional Theory
Shobhana Narasimhan
2017-08-01
Walter Kohn transformed theoretical chemistry and solid statephysics with his development of density functional theory, forwhich he was awarded the Nobel Prize. This article tries toexplain, in simple terms, why this was an important advancein the field, and to describe precisely what it was that he (togetherwith his collaborators Pierre Hohenberg and Lu JeuSham) achieved.
Deur, Killian; Fromager, Emmanuel
2016-01-01
Ensemble density functional theory (eDFT) is an exact time-independent alternative to time-dependent DFT (TD-DFT) for the calculation of excitation energies. Despite its formal simplicity and advantages in contrast to TD-DFT (multiple excitations, for example, can be easily taken into account in an ensemble), eDFT is not standard which is essentially due to the lack of reliable approximate exchange-correlation (xc) functionals for ensembles. Following Burke and coworkers [Phys. Rev. B 93, 245131 (2016)], we propose in this work to construct an exact eDFT for the nontrivial asymmetric Hubbard dimer, thus providing more insight into the weight dependence of the ensemble xc energy in various correlation regimes. For that purpose, an exact analytical expression for the weight-dependent ensemble exchange energy has been derived. The complementary exact ensemble correlation energy has been computed by means of Legendre-Fenchel transforms. Interesting features like discontinuities in the ensemble xc potential in the...
Ballestra, Luca Vincenzo; Pacelli, Graziella; Radi, Davide
2016-12-01
We propose a numerical method to compute the first-passage probability density function in a time-changed Brownian model. In particular, we derive an integral representation of such a density function in which the integrand functions must be obtained solving a system of Volterra equations of the first kind. In addition, we develop an ad-hoc numerical procedure to regularize and solve this system of integral equations. The proposed method is tested on three application problems of interest in mathematical finance, namely the calculation of the survival probability of an indebted firm, the pricing of a single-knock-out put option and the pricing of a double-knock-out put option. The results obtained reveal that the novel approach is extremely accurate and fast, and performs significantly better than the finite difference method.
Tripathi, Jai Prakash; Abbas, Syed; Thakur, Manoj
2015-05-01
This paper describes a predator-prey model incorporating a prey refuge. The feeding rate of consumers (predators) per consumer (i.e. functional response) is considered to be of Beddington-DeAngelis type. The Beddington-DeAngelis functional response is similar to the Holling-type II functional response but contains an extra term describing mutual interference by predators. We investigate the role of prey refuge and degree of mutual interference among predators in the dynamics of system. The dynamics of the system is discussed mainly from the point of view of permanence and stability. We obtain conditions that affect the persistence of the system. Local and global asymptotic stability of various equilibrium solutions is explored to understand the dynamics of the model system. The global asymptotic stability of positive interior equilibrium solution is established using suitable Lyapunov functional. The dynamical behaviour of the delayed system is further analyzed through incorporating discrete type gestation delay of predator. It is found that Hopf bifurcation occurs when the delay parameter τ crosses some critical value. The analytical results found in the paper are illustrated with the help of numerical examples.
Multicomponent density functional theory embedding formulation.
Culpitt, Tanner; Brorsen, Kurt R; Pak, Michael V; Hammes-Schiffer, Sharon
2016-07-28
Multicomponent density functional theory (DFT) methods have been developed to treat two types of particles, such as electrons and nuclei, quantum mechanically at the same level. In the nuclear-electronic orbital (NEO) approach, all electrons and select nuclei, typically key protons, are treated quantum mechanically. For multicomponent DFT methods developed within the NEO framework, electron-proton correlation functionals based on explicitly correlated wavefunctions have been designed and used in conjunction with well-established electronic exchange-correlation functionals. Herein a general theory for multicomponent embedded DFT is developed to enable the accurate treatment of larger systems. In the general theory, the total electronic density is separated into two subsystem densities, denoted as regular and special, and different electron-proton correlation functionals are used for these two electronic densities. In the specific implementation, the special electron density is defined in terms of spatially localized Kohn-Sham electronic orbitals, and electron-proton correlation is included only for the special electron density. The electron-proton correlation functional depends on only the special electron density and the proton density, whereas the electronic exchange-correlation functional depends on the total electronic density. This scheme includes the essential electron-proton correlation, which is a relatively local effect, as well as the electronic exchange-correlation for the entire system. This multicomponent DFT-in-DFT embedding theory is applied to the HCN and FHF(-) molecules in conjunction with two different electron-proton correlation functionals and three different electronic exchange-correlation functionals. The results illustrate that this approach provides qualitatively accurate nuclear densities in a computationally tractable manner. The general theory is also easily extended to other types of partitioning schemes for multicomponent systems.
Multicomponent density functional theory embedding formulation
Culpitt, Tanner; Brorsen, Kurt R.; Pak, Michael V.; Hammes-Schiffer, Sharon
2016-07-01
Multicomponent density functional theory (DFT) methods have been developed to treat two types of particles, such as electrons and nuclei, quantum mechanically at the same level. In the nuclear-electronic orbital (NEO) approach, all electrons and select nuclei, typically key protons, are treated quantum mechanically. For multicomponent DFT methods developed within the NEO framework, electron-proton correlation functionals based on explicitly correlated wavefunctions have been designed and used in conjunction with well-established electronic exchange-correlation functionals. Herein a general theory for multicomponent embedded DFT is developed to enable the accurate treatment of larger systems. In the general theory, the total electronic density is separated into two subsystem densities, denoted as regular and special, and different electron-proton correlation functionals are used for these two electronic densities. In the specific implementation, the special electron density is defined in terms of spatially localized Kohn-Sham electronic orbitals, and electron-proton correlation is included only for the special electron density. The electron-proton correlation functional depends on only the special electron density and the proton density, whereas the electronic exchange-correlation functional depends on the total electronic density. This scheme includes the essential electron-proton correlation, which is a relatively local effect, as well as the electronic exchange-correlation for the entire system. This multicomponent DFT-in-DFT embedding theory is applied to the HCN and FHF- molecules in conjunction with two different electron-proton correlation functionals and three different electronic exchange-correlation functionals. The results illustrate that this approach provides qualitatively accurate nuclear densities in a computationally tractable manner. The general theory is also easily extended to other types of partitioning schemes for multicomponent systems.
Locality of correlation in density functional theory.
Burke, Kieron; Cancio, Antonio; Gould, Tim; Pittalis, Stefano
2016-08-07
The Hohenberg-Kohn density functional was long ago shown to reduce to the Thomas-Fermi (TF) approximation in the non-relativistic semiclassical (or large-Z) limit for all matter, i.e., the kinetic energy becomes local. Exchange also becomes local in this limit. Numerical data on the correlation energy of atoms support the conjecture that this is also true for correlation, but much less relevant to atoms. We illustrate how expansions around a large particle number are equivalent to local density approximations and their strong relevance to density functional approximations. Analyzing highly accurate atomic correlation energies, we show that EC → -AC ZlnZ + BCZ as Z → ∞, where Z is the atomic number, AC is known, and we estimate BC to be about 37 mhartree. The local density approximation yields AC exactly, but a very incorrect value for BC, showing that the local approximation is less relevant for the correlation alone. This limit is a benchmark for the non-empirical construction of density functional approximations. We conjecture that, beyond atoms, the leading correction to the local density approximation in the large-Z limit generally takes this form, but with BC a functional of the TF density for the system. The implications for the construction of approximate density functionals are discussed.
Density-functional theory of thermoelectric phenomena.
Eich, F G; Di Ventra, M; Vignale, G
2014-05-16
We introduce a nonequilibrium density-functional theory of local temperature and associated local energy density that is suited for the study of thermoelectric phenomena. The theory rests on a local temperature field coupled to the energy-density operator. We identify the excess-energy density, in addition to the particle density, as the basic variable, which is reproduced by an effective noninteracting Kohn-Sham system. A novel Kohn-Sham equation emerges featuring a time-dependent and spatially varying mass which represents local temperature variations. The adiabatic contribution to the Kohn-Sham potentials is related to the entropy viewed as a functional of the particle and energy density. Dissipation can be taken into account by employing linear response theory and the thermoelectric transport coefficients of the electron gas.
J. Lelito
2011-02-01
Full Text Available The grain density, Nv, in the solid state after solidification of AZ91/SiC composite is a function of maximum undercooling, ΔT, of a liquid alloy. This type of function depends on the characteristics of heterogeneous nucleation sites and number of SiC present in the alloy. The aim of this paper was selection of parameters for the model describing the relationship between the grain density of primary phase and undercooling. This model in connection with model of crystallisation, which is based on chemical elements diffusion and grain interface kinetics, can be used to predict casting quality and its microstructure. Nucleation models have parameters, which exact values are usually not known and sometimes even their physical meaning is under discussion. Those parameters can be obtained after mathematical analysis of the experimental data. The composites with 0, 1, 2, 3 and 4wt.% of SiC particles were prepared. The AZ91 alloy was a matrix of the composite reinforcement SiC particles. This composite was cast to prepare four different thickness plates.They were taken from the region near to the thermocouple, to analyze the undercooling for different composites and thickness plates and its influence on the grain size. The microstructure and thermal analysis gave set of values that connect mass fraction of SiC particles, and undercooling with grain size. These values were used to approximate nucleation model adjustment parameters. Obtained model can be very useful in modelling composites microstructure.
Smith, J. C.; Pribram-Jones, A.; Burke, K.
2016-06-01
Thermal density functional theory calculations often use the Mermin-Kohn-Sham scheme, but employ ground-state approximations to the exchange-correlation (XC) free energy. In the simplest solvable nontrivial model, an asymmetric Hubbard dimer, we calculate the exact many-body energies and the exact Mermin-Kohn-Sham functionals for this system and extract the exact XC free energy. For moderate temperatures and weak correlation, we find this approximation to be excellent. We extract various exact free-energy correlation components and the exact adiabatic connection formula.
Relativistic density functional for nuclear structure
2016-01-01
This book aims to provide a detailed introduction to the state-of-the-art covariant density functional theory, which follows the Lorentz invariance from the very beginning and is able to describe nuclear many-body quantum systems microscopically and self-consistently. Covariant density functional theory was introduced in nuclear physics in the 1970s and has since been developed and used to describe the diversity of nuclear properties and phenomena with great success. In order to provide an advanced and updated textbook of covariant density functional theory for graduate students and nuclear physics researchers, this book summarizes the enormous amount of material that has accumulated in the field of covariant density functional theory over the last few decades as well as the latest developments in this area. Moreover, the book contains enough details for readers to follow the formalism and theoretical results, and provides exhaustive references to explore the research literature.
Nuclear Energy Density Functional for KIDS
Gil, Hana; Hyun, Chang Ho; Park, Tae-Sun; Oh, Yongseok
2016-01-01
The density functional theory (DFT) is based on the existence and uniqueness of a universal functional $E[\\rho]$, which determines the dependence of the total energy on single-particle density distributions. However, DFT says nothing about the form of the functional. Our strategy is to first look at what we know, from independent considerations, about the analytical density dependence of the energy of nuclear matter and then, for practical applications, to obtain an appropriate density-dependent effective interaction by reverse engineering. In a previous work on homogeneous matter, we identified the most essential terms to include in our "KIDS" functional, named after the early-stage participating institutes. We now present first results for finite nuclei, namely the energies and radii of $^{16,28}$O, $^{40,60}$Ca.
A multiconfigurational hybrid density-functional theory
Sharkas, Kamal; Jensen, Hans Jørgen Aa; Toulouse, Julien; 10.1063/1.4733672
2012-01-01
We propose a multiconfigurational hybrid density-functional theory which rigorously combines a multiconfiguration self-consistent-field calculation with a density-functional approximation based on a linear decomposition of the electron-electron interaction. This gives a straightforward extension of the usual hybrid approximations by essentially adding a fraction \\lambda of exact static correlation in addition to the fraction \\lambda of exact exchange. Test calculations on the cycloaddition reactions of ozone with ethylene or acetylene and the dissociation of diatomic molecules with the Perdew-Burke-Ernzerhof (PBE) and Becke-Lee-Yang-Parr (BLYP) density functionals show that a good value of \\lambda is 0.25, as in the usual hybrid approximations. The results suggest that the proposed multiconfigurational hybrid approximations can improve over usual density-functional calculations for situations with strong static correlation effects.
Development of New Density Functional Approximations
Su, Neil Qiang; Xu, Xin
2017-05-01
Kohn-Sham density functional theory has become the leading electronic structure method for atoms, molecules, and extended systems. It is in principle exact, but any practical application must rely on density functional approximations (DFAs) for the exchange-correlation energy. Here we emphasize four aspects of the subject: (a) philosophies and strategies for developing DFAs; (b) classification of DFAs; (c) major sources of error in existing DFAs; and (d) some recent developments and future directions.
Lattice Boltzmann model with nearly constant density.
Fang, Hai-ping; Wan, Rong-zheng; Lin, Zhi-fang
2002-09-01
An improved lattice Boltzmann model is developed to simulate fluid flow with nearly constant fluid density. The ingredient is to incorporate an extra relaxation for fluid density, which is realized by introducing a feedback equation in the equilibrium distribution functions. The pressure is dominated by the moving particles at a node, while the fluid density is kept nearly constant and explicit mass conservation is retained as well. Numerical simulation based on the present model for the (steady) plane Poiseuille flow and the (unsteady) two-dimensional Womersley flow shows a great improvement in simulation results over the previous models. In particular, the density fluctuation has been reduced effectively while achieving a relatively large pressure gradient.
Azaj Ansari
2014-01-01
Full Text Available Modelling reaction mechanisms using density functional theory is one of the popular routes to underpin the course of a chemical reaction. Although numerous publications have come out in this area, the pitfall of modelling such reactions and explicitly publishing the entire data set (structures, energies, coordinates, spin densities, etc. which lead to the conclusions are scarce. Here we have attempted to set a trend wherein all the computed data to underpin the reaction mechanism of ortho-hydroxylation of aromatic compounds by high-valent iron-oxo complexes (FeIII–OOH, FeIV=O, and FeV=O are collected. Since the structure, energetics and other details of the calculations can be employed in future to probe/understand the reactivity pattern of such species, establishing the data set is justified. Here by analysing the presented results we also discuss in brief the presented results.
Varbanov, Hristo P; Jakupec, Michael A; Roller, Alexander; Jensen, Frank; Galanski, Markus; Keppler, Bernhard K
2013-01-10
Octahedral platinum(IV) complexes are promising candidates in the fight against cancer. In order to rationalize the further development of this class of compounds, detailed studies on their mechanisms of action, toxicity, and resistance must be provided and structure-activity relationships must be drawn. Herein, we report on theoretical and QSAR investigations of a series of 53 novel bis-, tris-, and tetrakis(carboxylato)platinum(IV) complexes, synthesized and tested for cytotoxicity in our laboratories. The hybrid DFT functional wb97x was used for optimization of the structure geometry and calculation of the descriptors. Reliable and robust QSAR models with good explanatory and predictive properties were obtained for both the cisplatin sensitive cell line CH1 and the intrinsically cisplatin resistant cell line SW480, with a set of four descriptors.
2012-01-01
Octahedral platinum(IV) complexes are promising candidates in the fight against cancer. In order to rationalize the further development of this class of compounds, detailed studies on their mechanisms of action, toxicity, and resistance must be provided and structure–activity relationships must be drawn. Herein, we report on theoretical and QSAR investigations of a series of 53 novel bis-, tris-, and tetrakis(carboxylato)platinum(IV) complexes, synthesized and tested for cytotoxicity in our laboratories. The hybrid DFT functional wb97x was used for optimization of the structure geometry and calculation of the descriptors. Reliable and robust QSAR models with good explanatory and predictive properties were obtained for both the cisplatin sensitive cell line CH1 and the intrinsically cisplatin resistant cell line SW480, with a set of four descriptors. PMID:23214999
Whitenack, Daniel L; Wasserman, Adam
2012-04-28
Aspects of density functional resonance theory (DFRT) [D. L. Whitenack and A. Wasserman, Phys. Rev. Lett. 107, 163002 (2011)], a recently developed complex-scaled version of ground-state density functional theory (DFT), are studied in detail. The asymptotic behavior of the complex density function is related to the complex resonance energy and system's threshold energy, and the function's local oscillatory behavior is connected with preferential directions of electron decay. Practical considerations for implementation of the theory are addressed including sensitivity to the complex-scaling parameter, θ. In Kohn-Sham DFRT, it is shown that almost all θ-dependence in the calculated energies and lifetimes can be extinguished via use of a proper basis set or fine grid. The highest occupied Kohn-Sham orbital energy and lifetime are related to physical affinity and width, and the threshold energy of the Kohn-Sham system is shown to be equal to the threshold energy of the interacting system shifted by a well-defined functional. Finally, various complex-scaling conditions are derived which relate the functionals of ground-state DFT to those of DFRT via proper scaling factors and a non-Hermitian coupling-constant system.
Zaffran, Jeremie; Caspary Toroker, Maytal
2016-08-09
NiOOH has recently been used to catalyze water oxidation by way of electrochemical water splitting. Few experimental data are available to rationalize the successful catalytic capability of NiOOH. Thus, theory has a distinctive role for studying its properties. However, the unique layered structure of NiOOH is associated with the presence of essential dispersion forces within the lattice. Hence, the choice of an appropriate exchange-correlation functional within Density Functional Theory (DFT) is not straightforward. In this work, we will show that standard DFT is sufficient to evaluate the geometry, but DFT+U and hybrid functionals are required to calculate the oxidation states. Notably, the benefit of DFT with van der Waals correction is marginal. Furthermore, only hybrid functionals succeed in opening a bandgap, and such methods are necessary to study NiOOH electronic structure. In this work, we expect to give guidelines to theoreticians dealing with this material and to present a rational approach in the choice of the DFT method of calculation.
Zhou Shi-Qi
2007-01-01
A universal theoretical approach is proposed which enables all hard sphere density functional approximations(DFAs) applicable to van der Waals fluids. The resultant DFA obtained by combining the universal theoretical approach with any hard sphere DFAs only needs as input a second-order direct correlation function (DCF) of a coexistence bulk fluid, and is applicable in both supercritical and subcritical temperature regions. The associated effective hard sphere density can be specified by a hard wall sum rule. It is indicated that the value of the effective hard sphere density so determined can be universal, i.e. can be applied to any external potentials different from the single hard wall. As an illustrating example, the universal theoretical approach is combined with a hard sphere bridge DFA to predict the density profile of a hard core attractive Yukawa model fluid influenced by diverse external fields; agreement between the present formalism's predictions and the corresponding simulation data is good or at least comparable to several previous DFT approaches. The primary advantage of the present theoretical approach combined with other hard sphere DFAs is discussed.
Particle conservation in dynamical density functional theory.
de Las Heras, Daniel; Brader, Joseph M; Fortini, Andrea; Schmidt, Matthias
2016-06-22
We present the exact adiabatic theory for the dynamics of the inhomogeneous density distribution of a classical fluid. Erroneous particle number fluctuations of dynamical density functional theory are absent, both for canonical and grand canonical initial conditions. We obtain the canonical free energy functional, which yields the adiabatic interparticle forces of overdamped Brownian motion. Using an exact and one of the most advanced approximate hard core free energy functionals, we obtain excellent agreement with simulations. The theory applies to finite systems in and out of equilibrium.
Versatile Density Functionals for Computational Surface Science
Wellendorff, Jess
Density functional theory (DFT) emerged almost 50 years ago. Since then DFT has established itself as the central electronic structure methodology for simulating atomicscale systems from a few atoms to a few hundred atoms. This success of DFT is due to a very favorable accuracy-to-computational c......Density functional theory (DFT) emerged almost 50 years ago. Since then DFT has established itself as the central electronic structure methodology for simulating atomicscale systems from a few atoms to a few hundred atoms. This success of DFT is due to a very favorable accuracy...... resampling techniques, thereby systematically avoiding problems with overfitting. The first ever density functional presenting both reliable accuracy and convincing error estimation is generated. The methodology is general enough to be applied to more complex functional forms with higher-dimensional fitting...
Integer Discontinuity of Density Functional Theory
Mosquera, Martin A
2014-01-01
Density functional approximations to the exchange-correlation energy of Kohn-Sham theory, such as the local density approximation and generalized gradient approximations, lack the well-known integer discontinuity, a feature that is critical to describe molecular dissociation correctly. Moreover, standard approximations to the exchange-correlation energy also fail to yield the correct linear dependence of the ground-state energy on the number of electrons when this is a non-integer number obtained from the grand canonical ensemble statistics. We present a formal framework to restore the integer discontinuity of any density functional approximation. Our formalism derives from a formula for the exact energy functional and a new constrained search functional that recovers the linear dependence of the energy on the number of electrons.
Density functional theory of the crystal field in dioxides
Diviš, M.; Kuriplach, J.; Richter, M.; Steinbeck, L.
1996-04-01
Presented are the results of ab-initio density functional calculations for PrO2 and UO2 using the general potential LAPW and optimized LCAO method in the local density approximation. The crystal field splitting of ionic Pr4+ and U4+ ground states was calculated and compared with predictions of a superposition model.
Cui, Wei; Lansac, Yves; Lee, Hochun; Hong, Seung-Tae; Jang, Yun Hee
2016-09-14
Complex formation between lithium (Li(+)) ions and electrolyte molecules would affect the ionic conductivity through the electrolyte in lithium-ion batteries (LIBs). We hence revisit the solvation number of Li(+) in the most commonly used ethylene carbonate (EC) electrolyte. The solvation number n of Li(+)(EC)n in the first solvation shell of Li(+) is estimated on the basis of the free energy calculated by the density functional theory combined with a hybrid solvation model where the explicit solvation shell of Li(+) is immersed in a free volume of an implicit bulk solvent. This new hybrid solvation (implicit and explicit) model predicts the most probable solvation number (n = 4) and solvation free energy (-91.3 kcal mol(-1)) of Li(+) in a good agreement with those predicted by calculations employing simpler solvation models (either implicit or explicit). The desolvation (n = 2) of Li(0)(EC)n upon reduction near anodes is also well described with this new hybrid model.
Wyrick, Jonathan; Bartels, Ludwig, E-mail: ludwig.bartels@ucr.edu [Pierce Hall, University of California-Riverside, Riverside, California 92521 (United States); Einstein, T. L. [Department of Physics and Condensed Matter Theory Center, University of Maryland, College Park, Maryland 20742-4111 (United States)
2015-03-14
We present a method of analyzing the results of density functional modeling of molecular adsorption in terms of an analogue of molecular orbitals. This approach permits intuitive chemical insight into the adsorption process. Applied to a set of anthracene derivates (anthracene, 9,10-anthraquinone, 9,10-dithioanthracene, and 9,10-diselenonanthracene), we follow the electronic states of the molecules that are involved in the bonding process and correlate them to both the molecular adsorption geometry and the species’ diffusive behavior. We additionally provide computational code to easily repeat this analysis on any system.
Wyrick, Jonathan; Einstein, T. L.; Bartels, Ludwig
2015-03-01
We present a method of analyzing the results of density functional modeling of molecular adsorption in terms of an analogue of molecular orbitals. This approach permits intuitive chemical insight into the adsorption process. Applied to a set of anthracene derivates (anthracene, 9,10-anthraquinone, 9,10-dithioanthracene, and 9,10-diselenonanthracene), we follow the electronic states of the molecules that are involved in the bonding process and correlate them to both the molecular adsorption geometry and the species' diffusive behavior. We additionally provide computational code to easily repeat this analysis on any system.
Kazachenko, Sergey; Bulusu, Satya; Thakkar, Ajit J
2013-06-14
Putative global minima are reported for methanol clusters (CH3OH)n with n ≤ 15. The predictions are based on global optimization of three intermolecular potential energy models followed by local optimization and single-point energy calculations using two variants of dispersion-corrected density functional theory. Recurring structural motifs include folded and/or twisted rings, folded rings with a short branch, and stacked rings. Many of the larger structures are stabilized by weak C-H···O bonds.
Noncovalent Interactions in Density-Functional Theory
DiLabio, Gino A
2014-01-01
Non-covalent interactions are essential in the description of soft matter, including materials of technological importance and biological molecules. In density-functional theory, common approaches fail to describe dispersion forces, an essential component in noncovalent binding interactions. In the last decade, great progress has been made in the development of accurate and computationally-efficient methods to describe noncovalently bound systems within the framework of density-functional theory. In this review, we give an account of the field from a chemical and didactic perspective, describing different approaches to the calculation of dispersion energies and comparing their accuracy, complexity, popularity, and general availability. This review should be useful to the newcomer who wants to learn more about noncovalent interactions and the different methods available at present to describe them using density-functional theory.
Density Functionals with Broad Applicability in Chemistry
Zhao, Yan; Truhlar, Donald G.
2008-02-01
The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. Although density functional theory is widely used in the computational chemistry community, the most popular density functional, B3LYP, has some serious shortcomings: (i) it is better for main-group chemistry than for transition metals; (ii) it systematically underestimates reaction barrier heights; (iii) it is inaccurate for interactions dominated by mediumrange correlation energy, such as van der Waals attraction, aromatic-aromatic stacking, and alkane isomerization energies. We have developed a variety of databases for testing and designing new density functionals. We used these data to design new density functionals, called M06-class (and, earlier, M05-class) functionals, for which we enforced some fundamental exact constraints such as the uniform-electron-gas limit and the absence of self-correlation energy. Our M06-class functionals depend on spin-up and spin-down electron densities (i.e., spin densities), spin density gradients, spin kinetic energy densities, and, for nonlocal (also called hybrid) functionals, Hartree-Fock exchange. We have developed four new functionals that overcome the above-mentioned difficulties: (a) M06, a hybrid meta functional, is a functional with good accuracy “across-theboard” for transition metals, main group thermochemistry, medium-range correlation energy, and barrier heights; (b) M06- 2X, another hybrid meta functional, is not good for transition metals but has excellent performance for main group chemistry, predicts accurate valence and Rydberg electronic excitation energies, and is an excellent functional for aromatic-aromatic stacking interactions; (c) M06-L is not as accurate as M06 for barrier heights but is the most accurate
Building a Universal Nuclear Energy Density Functional
Carlson, Joe A. [Michigan State Univ., East Lansing, MI (United States); Furnstahl, Dick; Horoi, Mihai; Lust, Rusty; Nazaewicc, Witek; Ng, Esmond; Thompson, Ian; Vary, James
2012-12-30
During the period of Dec. 1 2006 – Jun. 30, 2012, the UNEDF collaboration carried out a comprehensive study of all nuclei, based on the most accurate knowledge of the strong nuclear interaction, the most reliable theoretical approaches, the most advanced algorithms, and extensive computational resources, with a view towards scaling to the petaflop platforms and beyond. The long-term vision initiated with UNEDF is to arrive at a comprehensive, quantitative, and unified description of nuclei and their reactions, grounded in the fundamental interactions between the constituent nucleons. We seek to replace current phenomenological models of nuclear structure and reactions with a well-founded microscopic theory that delivers maximum predictive power with well-quantified uncertainties. Specifically, the mission of this project has been three-fold: First, to find an optimal energy density functional (EDF) using all our knowledge of the nucleonic Hamiltonian and basic nuclear properties; Second, to apply the EDF theory and its extensions to validate the functional using all the available relevant nuclear structure and reaction data; Third, to apply the validated theory to properties of interest that cannot be measured, in particular the properties needed for reaction theory.
Building a Universal Nuclear Energy Density Functional
Carlson, Joe A. [Michigan State University; Furnstahl, Dick; Horoi, Mihai; Lust, Rusty; Nazaewicc, Witek; Ng, Esmond; Thompson, Ian; Vary, James
2012-12-30
During the period of Dec. 1 2006 – Jun. 30, 2012, the UNEDF collaboration carried out a comprehensive study of all nuclei, based on the most accurate knowledge of the strong nuclear interaction, the most reliable theoretical approaches, the most advanced algorithms, and extensive computational resources, with a view towards scaling to the petaflop platforms and beyond. The long-term vision initiated with UNEDF is to arrive at a comprehensive, quantitative, and unified description of nuclei and their reactions, grounded in the fundamental interactions between the constituent nucleons. We seek to replace current phenomenological models of nuclear structure and reactions with a well-founded microscopic theory that delivers maximum predictive power with well-quantified uncertainties. Specifically, the mission of this project has been three-fold: First, to find an optimal energy density functional (EDF) using all our knowledge of the nucleonic Hamiltonian and basic nuclear properties; Second, to apply the EDF theory and its extensions to validate the functional using all the available relevant nuclear structure and reaction data; Third, to apply the validated theory to properties of interest that cannot be measured, in particular the properties needed for reaction theory.
Connection formula for thermal density functional theory
Pribram-Jones, Aurora
2015-01-01
The adiabatic connection formula of ground-state density functional theory relates the correlation energy to a coupling-constant integral over a purely potential contribution, and is widely used to understand and improve approximations. The corresponding formula for thermal density functional theory is cast as an integral over temperatures instead, ranging upwards from the system's physical temperature to infinite temperatures. Several formulas yield one component of the thermal correlation free energy in terms of another, many of which can be expressed either in terms of temperature- or coupling-constant integration. We illustrate with the uniform electron gas.
Density functional calculations of nanoscale conductance
Koentopp, Max; Chang, Connie [Department of Chemistry and Chemical Biology, Rutgers University, 610 Taylor Road, Piscataway, NJ 08854 (United States); Burke, Kieron [Department of Chemistry, UC Irvine, 1102 Natural Sciences 2, Irvine, CA 92697 (United States); Car, Roberto [Department of Chemistry and Princeton Institute for the Science and Technology of Materials (PRISM), Princeton University, Princeton, NJ 08544 (United States)
2008-02-27
Density functional calculations for the electronic conductance of single molecules are now common. We examine the methodology from a rigorous point of view, discussing where it can be expected to work, and where it should fail. When molecules are weakly coupled to leads, local and gradient-corrected approximations fail, as the Kohn-Sham levels are misaligned. In the weak bias regime, exchange-correlation corrections to the current are missed by the standard methodology. For finite bias, a new methodology for performing calculations can be rigorously derived using an extension of time-dependent current density functional theory from the Schroedinger equation to a master equation. (topical review)
Molecular Density Functional Theory of Water
Jeanmairet, Guillaume; Vuilleumier, Rodolphe; Borgis, Daniel; 10.1021/jz301956b
2013-01-01
Three dimensional implementations of liquid state theories offer an efficient alternative to computer simulations for the atomic-level description of aqueous solutions in complex environments. In this context, we present a (classical) molecular density functional theory (MDFT) of water that is derived from first principles and is based on two classical density fields, a scalar one, the particle density, and a vectorial one, the multipolar polarization density. Its implementation requires as input the partial charge distribution of a water molecule and three measurable bulk properties, namely the structure factor and the k-dependent longitudinal and transverse dielectric constants. It has to be complemented by a solute-solvent three-body term that reinforces tetrahedral order at short range. The approach is shown to provide the correct three-dimensional microscopic solvation profile around various molecular solutes, possibly possessing H-bonding sites, at a computer cost two-three orders of magnitude lower tha...
O. Pizio
2014-06-01
Full Text Available We investigate the electric double layer formed between charged walls of a slit-like pore and a solvent primitive model (SPM for electrolyte solution. The recently developed version of the weighted density functional approach for electrostatic interparticle interaction is applied to the study of the density profiles, adsorption and selectivity of adsorption of ions and solvent species. Our principal focus, however, is in the dependence of differential capacitance on the applied voltage, on the electrode and on the pore width. We discuss the properties of the model with respect to the behavior of a primitive model, i.e., in the absence of a hard-sphere solvent. We observed that the differential capacitance of the SPM on the applied electrostatic potential has the camel-like shape unless the ion fraction is high. Moreover, it is documented that the dependence of differential capacitance of the SPM on the pore width is oscillatory, which is in close similarity to the primitive model.
Density functional theory studies of etoricoxib
Sachdeva, Ritika; Kaur, Prabhjot; Singh, V. P.; Saini, G. S. S.
2016-05-01
Etoricoxib is a COX-2 selective inhibitor drug with molecular formula C18H15ClN2O2S. It is primarily used for the treatment of arthritis(rheumatoid, psoriatic, osteoarthritis), ankylosing spondylitis, gout and chronic low back pain. Theoretical studies of the molecule including geometry optimization and vibrational frequency calculations were carried out with the help of density functional theory calculations using 6-311++ g (d, p) basis set and B3LYP functional.
Density Functional Simulation of a Breaking Nanowire
Nakamura, A.; Brandbyge, Mads; Hansen, Lars Bruno
1999-01-01
We study the deformation and breaking of an atomic-sized sodium wire using density functional simulations. The wire deforms through sudden atomic rearrangements and smoother atomic displacements. The conductance of the wire exhibits plateaus at integer values in units of 2e(2)/h corresponding...
Density functional and neural network analysis
Jalkanen, K. J.; Bohr, Henrik
1997-01-01
Density functional theory (DFT) calculations have been carried out for hydrated L-alanine, L-alanyl-L-alanine and N-acetyl L-alanine N'-methylamide and examined with respect to the effect of water on the structure, the vibrational frequencies, vibrational absorption (VA) and vibrational circular...
Density functional theory with quantum nuclei
Requist, Ryan
2016-01-01
It is proved that the ground state energy of an electron-nuclear system is a variational functional of the conditional electronic density n_R(r), the nuclear wavefunction \\chi(R) and the quantum geometric tensor of the conditional electronic wavefunction $T_{\\mu\
Current Developments in Nuclear Density Functional Methods
Dobaczewski, J
2010-01-01
Density functional theory (DFT) became a universal approach to compute ground-state and excited configurations of many-electron systems held together by an external one-body potential in condensed-matter, atomic, and molecular physics. At present, the DFT strategy is also intensely studied and applied in the area of nuclear structure. The nuclear DFT, a natural extension of the self-consistent mean-field theory, is a tool of choice for computations of ground-state properties and low-lying excitations of medium-mass and heavy nuclei. Over the past thirty-odd years, a lot of experience was accumulated in implementing, adjusting, and using the density-functional methods in nuclei. This research direction is still extremely actively pursued. In particular, current developments concentrate on (i) attempts to improve the performance and precision delivered by the nuclear density-functional methods, (ii) derivations of density functionals from first principles rooted in the low-energy chromodynamics and effective th...
Density functional theory: Fixing Jacob's ladder
Car, Roberto
2016-09-01
Density functional theory calculations can be carried out with different levels of accuracy, forming a hierarchy that is often represented by the rungs of a ladder. Now a new method has been developed that significantly improves the accuracy of the 'third rung' when calculating the properties of diversely bonded systems.
Wang, Ying; Qian, Hu-Jun; Morokuma, Keiji; Irle, Stephan
2012-07-05
Ab initio coupled cluster and density functional theory studies of atomic hydrogen addition to the central region of pyrene and coronene as molecular models for graphene hydrogenation were performed. Fully relaxed potential energy curves (PECs) were computed at the spin-unrestricted B3LYP/cc-pVDZ level of theory for the atomic hydrogen attack of a center carbon atom (site A), the midpoint of a neighboring carbon bond (site B), and the center of a central hexagon (site C). Using the B3LYP/cc-pVDZ PEC geometries, we evaluated energies at the PBE density functional, as well as ab initio restricted open-shell ROMP2, ROCCSD, and ROCCSD(T) levels of theory, employing cc-pVDZ and cc-pVTZ basis sets, and performed a G2MS extrapolation to the ROCCSD(T)/cc-pVTZ level of theory. In agreement with earlier studies, we find that only site A attack leads to chemisorption. The G2MS entrance channel barrier heights, binding energies, and PEC profiles are found to agree well with a recent ab initio multireference wave function theory study (Bonfanti et al. J. Chem. Phys.2011, 135, 164701), indicating that single-reference open-shell methods including B3LYP are sufficient for the theoretical treatment of the interaction of graphene with a single hydrogen atom.
Yang, Bing
2014-12-04
Electronic delocalization effects have been proposed to play a key role in photocurrent generation in organic photovoltaic devices. Here, we study the role of charge delocalization on the nature of the charge-transfer (CT) states in the case of model complexes consisting of several pentacene molecules and one fullerene (C60) molecule, which are representative of donor/acceptor heterojunctions. The energies of the CT states are examined by means of time-dependent density functional theory (TD-DFT) using the long-range-corrected functional, ωB97X, with an optimized range-separation parameter, ω. We provide a general description of how the nature of the CT states is impacted by molecular packing (i.e., interfacial donor/acceptor orientations), system size, and intermolecular interactions, features of importance in the understanding of the charge-separation mechanism.
Shishkin, M; Ziegler, T
2014-02-07
The first principles modeling of electrochemical reactions has proven useful for the development of efficient, durable and low cost solid oxide full cells (SOFCs). In this account we focus on recent advances in modeling of structural, electronic and catalytic properties of the SOFC anodes based on density functional theory (DFT) first principle calculations. As a starting point, we highlight that the adequate analysis of cell electrochemistry generally requires modeling of chemical reactions at the metal/oxide interface rather than on individual metal or oxide surfaces. The atomic models of Ni/YSZ and Ni/CeO2 interfaces, required for DFT simulations of reactions on SOFC anodes are discussed next, together with the analysis of the electronic structure of these interfaces. Then we proceed to DFT-based findings on charge transfer mechanisms during redox reactions on these two anodes. We provide a comparison of the electronic properties of Ni/YSZ and Ni/CeO2 interfaces and present an interpretation of their different chemical performances. Subsequently we discuss the computed energy pathways of fuel oxidation mechanisms, obtained by various groups to date. We also discuss the results of DFT studies combined with microkinetic modeling as well as the results of kinetic Monte Carlo simulations. In conclusion we summarize the key findings of DFT modeling of metal/oxide interfaces to date and highlight possible directions in the future modeling of SOFC anodes.
Løvvik, O. M.; Diplas, S.; Ulyashin, A. [SINTEF Materials and Chemistry, Forskningsveien 1, NO-0314 Oslo (Norway); Romanyuk, A. [University of Basel, Kingelbergstr. 82, CH-4056 Basel (Switzerland)
2014-02-28
Initial stages of indium tin oxide (ITO) growth on a polished Si substrate upon magnetron sputtering were studied experimentally using in-situ x-ray photoelectron spectroscopy measurements. The presence of pure indium and tin, as well as Si bonded to oxygen at the ITO/Si interface were observed. The experimental observations were compared with several atomistic models of ITO/Si interfaces. A periodic model of the ITO/Si interface was constructed, giving detailed information about the local environment at the interface. Molecular dynamics based on density functional theory was performed, showing how metal-oxygen bonds are broken on behalf of silicon-oxygen bonds. These theoretical results support and provide an explanation for the present as well as previous ex-situ and in-situ experimental observations pointing to the creation of metallic In and Sn along with the growth of SiO{sub x} at the ITO/Si interface.
Spin in Density-Functional Theory
Jacob, Christoph R; 10.1002/qua.24309
2012-01-01
The accurate description of open-shell molecules, in particular of transition metal complexes and clusters, is still an important challenge for quantum chemistry. While density-functional theory (DFT) is widely applied in this area, the sometimes severe limitations of its currently available approximate realizations often preclude its application as a predictive theory. Here, we review the foundations of DFT applied to open-shell systems, both within the nonrelativistic and the relativistic framework. In particular, we provide an in-depth discussion of the exact theory, with a focus on the role of the spin density and possibilities for targeting specific spin states. It turns out that different options exist for setting up Kohn-Sham DFT schemes for open-shell systems, which imply different definitions of the exchange-correlation energy functional and lead to different exact conditions on this functional. Finally, we suggest some possible directions for future developments.
Legler, C R; Brown, N R; Dunbar, R A; Harness, M D; Nguyen, K; Oyewole, O; Collier, W B
2015-06-15
The Scaled Quantum Mechanical (SQM) method of scaling calculated force constants to predict theoretically calculated vibrational frequencies is expanded to include a broad array of polarized and augmented basis sets based on the split valence 6-31G and 6-311G basis sets with the B3LYP density functional. Pulay's original choice of a single polarized 6-31G(d) basis coupled with a B3LYP functional remains the most computationally economical choice for scaled frequency calculations. But it can be improved upon with additional polarization functions and added diffuse functions for complex molecular systems. The new scale factors for the B3LYP density functional and the 6-31G, 6-31G(d), 6-31G(d,p), 6-31G+(d,p), 6-31G++(d,p), 6-311G, 6-311G(d), 6-311G(d,p), 6-311G+(d,p), 6-311G++(d,p), 6-311G(2d,p), 6-311G++(2d,p), 6-311G++(df,p) basis sets are shown. The double d polarized models did not perform as well and the source of the decreased accuracy was investigated. An alternate system of generating internal coordinates that uses the out-of plane wagging coordinate whenever it is possible; makes vibrational assignments via potential energy distributions more meaningful. Automated software to produce SQM scaled vibrational calculations from different molecular orbital packages is presented.
Kehoe, Aoife B; Scanlon, David O; Watson, Graeme W
2016-05-05
The geometric and electronic properties of a series of potential photovoltaic materials, the sulvanite structured Cu3MCh4(M = V, Nb, Ta; Ch = S, Se, Te), have been computationally examined using both PBEsol+U and HSE06 methods to assess the materials' suitability for solar cell application and to compare the predictions of the two theoretical approaches. The lattice parameters, electronic density of states, and band gaps of the compounds have been calculated to ascertain the experimental agreement obtained by each method and to determine if any of the systems have an optical band gap appropriate for photovoltaic absorber materials. The PBEsol+U results are shown to achieve better agreement with experiment than HSE06 in terms of both lattice constants and band gaps, demonstrating that higher level theoretical methods do not automatically result in a greater level of accuracy than their computationally less expensive counterparts. The PBEsol+U calculated optical band gaps of five materials suggest potential suitability as photovoltaic absorbers, with values of 1.72 eV, 1.49 eV, 1.19 eV, 1.46 eV, and 1.69 eV for Cu3VS4, Cu3VSe4, Cu3VTe4, Cu3NbTe4, and Cu3TaTe4, respectively, although it should be noted that all fundamental band gaps are indirect in nature, which could lower the open-circuit voltage and hence the efficiency of prospective devices.
Groves, Michael Nelson
The current global energy and environmental challenges need to be addressed by developing a new portfolio of clean power producing devices. The proton exchange membrane fuel cell has the potential to be included and can fit into a variety of niches ranging from portable electronics to stationary residential applications. One of the many barriers to commercial viability is the cost of the cathode layer which requires too much platinum metal to achieve a comparable power output as well as would need to be replaced more frequently when compared to conventional sources for most applications. Using density functional theory, an ab initio modeling technique, these durability and activity issues are examined for platinum catalysts on graphene and carbon nanotube supports. The carbon supports were also doped by replacing individual carbon atoms with other second row elements (beryllium, boron, nitrogen, and oxygen) and the effect on the platinum-surface interaction along with the interaction between the platinum and the oxygen reduction reaction intermediates are discussed. Keywords: proton exchange membrane fuel cell, density functional theory, platinum catalyst, oxygen reduction reaction, doped carbon surfaces
Adiabatic density-functional perturbation theory
Gonze, Xavier
1995-08-01
The treatment of adiabatic perturbations within density-functional theory is examined, at arbitrary order of the perturbation expansion. Due to the extremal property of the energy functional, standard variation-perturbation theorems can be used. The different methods (Sternheimer equation, extremal principle, Green's function, and sum over state) for obtaining the perturbation expansion of the wave functions are presented. The invariance of the Hilbert space of occupied wave functions with respect to a unitary transformation leads to the definition of a ``parallel-transport-gauge'' and a ``diagonal-gauge'' perturbation expansion. Then, the general expressions are specialized for the second, third, and fourth derivative of the energy, with an example of application of the method up to third order.
2014-10-14
and materials for energy storage. San Francisco , CA. 10-14 August 2014. 10. 248th ACS National Meeting & Exposition, PHYS Symposium on Quantum...Chemical Calculation of Molecular Properties: A Tribute to Professor Nicholas C. Handy Symposium. San Francisco , CA. 10-14 August 2014. 11. Gordon...Parmigiani, eds. Cluster models for surface and bulk phenomena, pp. 1-82 (NATO ASI Ser., New York, Plenum, 1992). [27] J. L. Whitten and H. Yang, Theory
Density functional theory on phase space
Blanchard, Philippe; Várilly, Joseph C
2010-01-01
Forty-five years after the point de d\\'epart [1] of density functional theory, its applications in chemistry and the study of electronic structures keep steadily growing. However, the precise form of the "divine" energy functional in terms of the electron density [2] still eludes us --and possibly will do so forever [3]. In what follows we examine a formulation in the same spirit with phase-space variables. The validity of Hohenberg-Kohn-Levy-type theorems on phase space is recalled. We study the representability problem for reduced Wigner functions, and proceed to analyze properties of the new functional. Along the way, new results on states in the phase-space formalism of quantum mechanics are established. Natural Wigner orbital theory is developed in depth, with the final aim of constructing accurate correlation-exchange functionals on phase space. A new proof of the overbinding property of the Mueller functional is given. This exact theory supplies its home at long last to that illustrious ancestor, the T...
Pressure Correction in Density Functional Theory Calculations
Lee, S H
2008-01-01
First-principles calculations based on density functional theory have been widely used in studies of the structural, thermoelastic, rheological, and electronic properties of earth-forming materials. The exchange-correlation term, however, is implemented based on various approximations, and this is believed to be the main reason for discrepancies between experiments and theoretical predictions. In this work, by using periclase MgO as a prototype system we examine the discrepancies in pressure and Kohn-Sham energy that are due to the choice of the exchange-correlation functional. For instance, we choose local density approximation and generalized gradient approximation. We perform extensive first-principles calculations at various temperatures and volumes and find that the exchange-correlation-based discrepancies in Kohn-Sham energy and pressure should be independent of temperature. This implies that the physical quantities, such as the equation of states, heat capacity, and the Gr\\"{u}neisen parameter, estimat...
Density functional theory a practical introduction
Sholl, David
2009-01-01
Demonstrates how anyone in math, science, and engineering can master DFT calculations Density functional theory (DFT) is one of the most frequently used computational tools for studying and predicting the properties of isolated molecules, bulk solids, and material interfaces, including surfaces. Although the theoretical underpinnings of DFT are quite complicated, this book demonstrates that the basic concepts underlying the calculations are simple enough to be understood by anyone with a background in chemistry, physics, engineering, or mathematics. The authors show how the widespread availability of powerful DFT codes makes it possible for students and researchers to apply this important computational technique to a broad range of fundamental and applied problems. Density Functional Theory: A Practical Introduction offers a concise, easy-to-follow introduction to the key concepts and practical applications of DFT, focusing on plane-wave DFT. The authors have many years of experience introducing DFT to studen...
Teaching Density Functional Theory Through Experiential Learning
Narasimhan, Shobhana
2015-09-01
Today, quantum mechanical density functional theory is often the method of choice for performing accurate calculations on atomic, molecular and condensed matter systems. Here, I share some of my experiences in teaching the necessary basics of solid state physics, as well as the theory and practice of density functional theory, in a number of workshops held in developing countries over the past two decades. I discuss the advantages of supplementing the usual mathematically formal teaching methods, characteristic of graduate courses, with the use of visual imagery and analogies. I also describe a successful experiment we carried out, which resulted in a joint publication co-authored by 67 lecturers and students participating in a summer school.
General degeneracy in density functional perturbation theory
Palenik, Mark C
2016-01-01
Degenerate perturbation theory from quantum mechanics is inadequate in density functional theory (DFT) because of nonlinearity in the Kohn-Sham potential. We develop the fully general degenerate perturbation theory for DFT without assuming that the degeneracy is required by symmetry. The resulting methodology is applied to the iron atom ground state in order to demonstrate the effects of degeneracy that appears both due to symmetry requirements and accidentally, between different representations of the symmetry group.
Li, Jiqiu; Fenton, Andy; Kettley, Lee; Roberts, Phillip; Montagnes, David J S
2013-10-07
We propose that delayed predator-prey models may provide superficially acceptable predictions for spurious reasons. Through experimentation and modelling, we offer a new approach: using a model experimental predator-prey system (the ciliates Didinium and Paramecium), we determine the influence of past-prey abundance at a fixed delay (approx. one generation) on both functional and numerical responses (i.e. the influence of present : past-prey abundance on ingestion and growth, respectively). We reveal a nonlinear influence of past-prey abundance on both responses, with the two responding differently. Including these responses in a model indicated that delay in the numerical response drives population oscillations, supporting the accepted (but untested) notion that reproduction, not feeding, is highly dependent on the past. We next indicate how delays impact short- and long-term population dynamics. Critically, we show that although superficially the standard (parsimonious) approach to modelling can reasonably fit independently obtained time-series data, it does so by relying on biologically unrealistic parameter values. By contrast, including our fully parametrized delayed density dependence provides a better fit, offering insights into underlying mechanisms. We therefore present a new approach to explore time-series data and a revised framework for further theoretical studies.
Computing dispersion interactions in density functional theory
Cooper, V. R.; Kong, L.; Langreth, D. C.
2010-02-01
In this article techniques for including dispersion interactions within density functional theory are examined. In particular comparisons are made between four popular methods: dispersion corrected DFT, pseudopotential correction schemes, symmetry adapted perturbation theory, and a non-local density functional - the so called Rutgers-Chalmers van der Waals density functional (vdW-DF). The S22 benchmark data set is used to evaluate the relative accuracy of these methods and factors such as scalability and transferability are also discussed. We demonstrate that vdW-DF presents an excellent compromise between computational speed and accuracy and lends most easily to full scale application in solid materials. This claim is supported through a brief discussion of a recent large scale application to H2 in a prototype metal organic framework material (MOF), Zn2BDC2TED. The vdW-DF shows overwhelming promise for first-principles studies of physisorbed molecules in porous extended systems; thereby having broad applicability for studies as diverse as molecular adsorption and storage, battery technology, catalysis and gas separations.
Multistate Density Functional Theory for Effective Diabatic Electronic Coupling.
Ren, Haisheng; Provorse, Makenzie R; Bao, Peng; Qu, Zexing; Gao, Jiali
2016-06-16
Multistate density functional theory (MSDFT) is presented to estimate the effective transfer integral associated with electron and hole transfer reactions. In this approach, the charge-localized diabatic states are defined by block localization of Kohn-Sham orbitals, which constrain the electron density for each diabatic state in orbital space. This differs from the procedure used in constrained density functional theory that partitions the density within specific spatial regions. For a series of model systems, the computed transfer integrals are consistent with experimental data and show the expected exponential attenuation with the donor-acceptor separation. The present method can be used to model charge transfer reactions including processes involving coupled electron and proton transfer.
Density Functional Theory for General Hard-Core Lattice Gases
Lafuente, Luis; Cuesta, José A.
2004-09-01
We put forward a general procedure to obtain an approximate free-energy density functional for any hard-core lattice gas, regardless of the shape of the particles, the underlying lattice, or the dimension of the system. The procedure is conceptually very simple and recovers effortlessly previous results for some particular systems. Also, the obtained density functionals belong to the class of fundamental measure functionals and, therefore, are always consistent through dimensional reduction. We discuss possible extensions of this method to account for attractive lattice models.
Mennucci, Benedetta; Cappelli, Chiara; Guido, Ciro Achille; Cammi, Roberto; Tomasi, Jacopo
2009-04-02
This paper provides an overview of recent research activities concerning the quantum-mechanical description of structures and properties of electronically excited chromophores in solution. The focus of the paper is on a specific approach to include solvent effects, namely the polarizable continuum model (PCM). Such a method represents an efficient strategy if coupled to proper quantum-mechanical descriptions such as the time-dependent density functional theory (TDDFT). As a result, the description of molecules in the condensed phase can be extended to excited states still maintaining the computational efficiency and the physical reliability of the ground-state calculations. The most important theoretical and computational aspects of the coupling between PCM and TDDFT are presented and discussed together with an example of application to the study of the low-lying electronic excited states of push-pull chromophores in different solvents.
A real-space stochastic density matrix approach for density functional electronic structure.
Beck, Thomas L
2015-12-21
The recent development of real-space grid methods has led to more efficient, accurate, and adaptable approaches for large-scale electrostatics and density functional electronic structure modeling. With the incorporation of multiscale techniques, linear-scaling real-space solvers are possible for density functional problems if localized orbitals are used to represent the Kohn-Sham energy functional. These methods still suffer from high computational and storage overheads, however, due to extensive matrix operations related to the underlying wave function grid representation. In this paper, an alternative stochastic method is outlined that aims to solve directly for the one-electron density matrix in real space. In order to illustrate aspects of the method, model calculations are performed for simple one-dimensional problems that display some features of the more general problem, such as spatial nodes in the density matrix. This orbital-free approach may prove helpful considering a future involving increasingly parallel computing architectures. Its primary advantage is the near-locality of the random walks, allowing for simultaneous updates of the density matrix in different regions of space partitioned across the processors. In addition, it allows for testing and enforcement of the particle number and idempotency constraints through stabilization of a Feynman-Kac functional integral as opposed to the extensive matrix operations in traditional approaches.
Petrie, Simon; Gatt, Phillip; Stranger, Rob; Pace, Ron J
2012-08-28
Density functional theory (DFT) calculations are reported for a set of model compounds intended to represent the structure of the Photosystem II (PSII) water oxidising complex (WOC) as determined by the recent 1.9 Å resolution single crystal X-ray diffraction (XRD) study of Umena et al. In contrast with several other theoretical studies addressing this structure, we find that it is not necessary to invoke photoreduction of the crystalline sample below the S(1)'resting state' in order to rationalise the observed WOC geometry. Our results are consistent with crystallised PSII in the S(1) state, with S(1) corresponding to either (Mn(III))(4) or (Mn(III))(2)(Mn(IV))(2) as required by the two competing paradigms for the WOC oxidation state pattern. Of these two paradigms, the 'low-oxidation-state' paradigm provides a better match for the crystal structure, with the comparatively long Mn(2)-Mn(3) distance in particular proving difficult to reconcile with the 'high-oxidation-state' model. Best agreement with the set of metal-metal distances is obtained with a S(1) model featuring μ-O, μ-OH bridging between Mn(3) and Mn(4) and deprotonation of one water ligand on Mn(4). Theoretical modelling of the 1.9 Å structure is an important step in assessing the validity of this recent crystal structure, with implications for our understanding of the mechanism of water oxidation by PSII.
Hughes, Adam P.; Thiele, Uwe; Archer, Andrew J.
2015-02-01
The contribution to the free energy for a film of liquid of thickness h on a solid surface due to the interactions between the solid-liquid and liquid-gas interfaces is given by the binding potential, g(h). The precise form of g(h) determines whether or not the liquid wets the surface. Note that differentiating g(h) gives the Derjaguin or disjoining pressure. We develop a microscopic density functional theory (DFT) based method for calculating g(h), allowing us to relate the form of g(h) to the nature of the molecular interactions in the system. We present results based on using a simple lattice gas model, to demonstrate the procedure. In order to describe the static and dynamic behaviour of non-uniform liquid films and drops on surfaces, a mesoscopic free energy based on g(h) is often used. We calculate such equilibrium film height profiles and also directly calculate using DFT the corresponding density profiles for liquid drops on surfaces. Comparing quantities such as the contact angle and also the shape of the drops, we find good agreement between the two methods. We also study in detail the effect on g(h) of truncating the range of the dispersion forces, both those between the fluid molecules and those between the fluid and wall. We find that truncating can have a significant effect on g(h) and the associated wetting behaviour of the fluid.
Nold, Andreas; Sibley, David N.; Goddard, Benjamin D.; Kalliadasis, Serafim
2014-07-01
We examine the nanoscale behavior of an equilibrium three-phase contact line in the presence of long-ranged intermolecular forces by employing a statistical mechanics of fluids approach, namely, density functional theory (DFT) together with fundamental measure theory (FMT). This enables us to evaluate the predictive quality of effective Hamiltonian models in the vicinity of the contact line. In particular, we compare the results for mean field effective Hamiltonians with disjoining pressures defined through (i) the adsorption isotherm for a planar liquid film, and (ii) the normal force balance at the contact line. We find that the height profile obtained using (i) shows good agreement with the adsorption film thickness of the DFT-FMT equilibrium density profile in terms of maximal curvature and the behavior at large film heights. In contrast, we observe that while the height profile obtained by using (ii) satisfies basic sum rules, it shows little agreement with the adsorption film thickness of the DFT results. The results are verified for contact angles of 20°, 40°, and 60°.
Danny Eytan
2016-01-01
Full Text Available Acute brain injury is a common cause of death and critical illness in children and young adults. Fundamental management focuses on early characterization of the extent of injury and optimizing recovery by preventing secondary damage during the days following the primary injury. Currently, bedside technology for measuring neurological function is mainly limited to using electroencephalography (EEG for detection of seizures and encephalopathic features, and evoked potentials. We present a proof of concept study in patients with acute brain injury in the intensive care setting, featuring a bedside functional imaging set-up designed to map cortical brain activation patterns by combining high density EEG recordings, multi-modal sensory stimulation (auditory, visual, and somatosensory, and EEG source modeling. Use of source-modeling allows for examination of spatiotemporal activation patterns at the cortical region level as opposed to the traditional scalp potential maps. The application of this system in both healthy and brain-injured participants is demonstrated with modality-specific source-reconstructed cortical activation patterns. By combining stimulation obtained with different modalities, most of the cortical surface can be monitored for changes in functional activation without having to physically transport the subject to an imaging suite. The results in patients in an intensive care setting with anatomically well-defined brain lesions suggest a topographic association between their injuries and activation patterns. Moreover, we report the reproducible application of a protocol examining a higher-level cortical processing with an auditory oddball paradigm involving presentation of the patient's own name. This study reports the first successful application of a bedside functional brain mapping tool in the intensive care setting. This application has the potential to provide clinicians with an additional dimension of information to manage
Density Functional Theory An Advanced Course
Dreizler, Reiner M
2011-01-01
Density Functional Theory (DFT) has firmly established itself as the workhorse for the atomic-level simulation of condensed matter phases, pure or composite materials and quantum chemical systems. The present book is a rigorous and detailed introduction to the foundations up to and including such advanced topics as orbital-dependent functionals and both time-dependent and relativistic DFT. Given the many ramifications of contemporary DFT, this text concentrates on the self-contained presentation of the basics of the most widely used DFT variants. This implies a thorough discussion of the corresponding existence theorems and effective single particle equations, as well as of key approximations utilized in implementations. The formal results are complemented by selected quantitative results, which primarily aim at illustrating strengths and weaknesses of a particular approach or functional. DFT for superconducting or nuclear and hadronic systems are not addressed in this work. The structure and material contain...
无
2006-01-01
A temperature-constrained cascade correlation network(TCCCN), a back-propagation neural network(BP), and multiple linear regression(MLR) models were applied to quantitative structure-activity relationship(QSAR) modeling, on the basis of a set of 35 nitrobenzene derivatives and their acute toxicities. These structural quantum-chemical descriptors were obtained from the density functional theory(DFT). Stepwise multiple regression analysis was performed and the model was obtained. The value of the calibration correlation coefficient R is 0.925, and the value of cross-validation correlation coefficient R is 0.87. The standard error S=0.308 and the cross-validated(leave-one-out) standard error Scv=0.381. Principal component analysis(PCA) was carried out for parameter selection. RMS errors for training set via TCCCN and BP are 0.067 and 0.095, respectively, and RMS errors for testing set via TCCCN and BP are 0.090 and 0.111, respectively. The results show that TCCCN performs better than BP and MLR.
Density Functional Approach Based on Numerically Obtained Bridge Functional
ZHOUShi－Qi
2002-01-01
The ornstein-zenike equation is solved with the Rogers-Young approximation for bulk hard sphere fluid and Lennard-Jones fluid for several state points.Then the resulted bulk fluid radial distribution function combined with the test particle method is employed to determine numerically the function relationship of bridge functional as a function of indirect correlation function.It is found that all of the calculated points from different phase space state points for a same type of fluid collapse onto a same smooth curve.Then the numerically obtained curve is used to substitute the analytic expression of the bridge functional as a function of indirect correlation function required in the methodology [J.Chem.Phys,112(2000)8079] to determine the density distribution of non-uniform hard sphere fluid and Lennard-Jones fluid.The good agreement of theoretical predictions with the computer simulation data is obtained.The present numerical procedure incroporates the knowledge of bulk fluid radial distribution function into the constructing of the density functional approximation and makes the original methodology more accurate and more filexible for various interaction potential fluid.
RHOCUBE: 3D density distributions modeling code
Nikutta, Robert; Agliozzo, Claudia
2016-11-01
RHOCUBE models 3D density distributions on a discrete Cartesian grid and their integrated 2D maps. It can be used for a range of applications, including modeling the electron number density in LBV shells and computing the emission measure. The RHOCUBE Python package provides several 3D density distributions, including a powerlaw shell, truncated Gaussian shell, constant-density torus, dual cones, and spiralling helical tubes, and can accept additional distributions. RHOCUBE provides convenient methods for shifts and rotations in 3D, and if necessary, an arbitrary number of density distributions can be combined into the same model cube and the integration ∫ dz performed through the joint density field.
Nuclear Energy Density Functionals: What do we really know?
Bulgac, Aurel; Jin, Shi
2015-01-01
We present the simplest nuclear energy density functional (NEDF) to date, determined by only 4 significant phenomenological parameters, yet capable of fitting measured nuclear masses with better accuracy than the Bethe-Weizs\\"acker mass formula, while also describing density structures (charge radii, neutron skins etc.) and time-dependent phenomena (induced fission, giant resonances, low energy nuclear collisions, etc.). The 4 significant parameters are necessary to describe bulk nuclear properties (binding energies and charge radii); an additional 2 to 3 parameters have little influence on the bulk nuclear properties, but allow independent control of the density dependence of the symmetry energy and isovector excitations, in particular the Thomas-Reiche-Kuhn sum rule. This Hohenberg-Kohn-style of density functional theory successfully realizes Weizs\\"acker's ideas and provides a computationally tractable model for a variety of static nuclear properties and dynamics, from finite nuclei to neutron stars, where...
Insight and progress in density functional theory
Yang, Weitao; Mori-Sanchez, Paula; Cohen, Aron J.
2012-12-01
Density functional theory of electronic structure is widely and successfully applied in simulations throughout engineering and sciences. However, there are spectacular failures for many predicted properties. The errors include underestimation of the barriers of chemical reactions, the band gaps of materials, the energies of dissociating molecular ions and charge transfer excitation energies. Typical DFT calculations also fail to describe degenerate or near degenerate systems, as arise in the breaking of chemical bonds, and strongly correlated materials. These errors can all be characterized and understood through the perspective of fractional charges and fractional spins introduced recently.
Density functional and neural network analysis
Jalkanen, K. J.; Bohr, Henrik
1997-01-01
Density functional theory (DFT) calculations have been carried out for hydrated L-alanine, L-alanyl-L-alanine and N-acetyl L-alanine N'-methylamide and examined with respect to the effect of water on the structure, the vibrational frequencies, vibrational absorption (VA) and vibrational circular...... dichroism (VCD) intensities. The large changes due to hydration on the structures, relative stability of conformers, and in the VA and VCD spectra observed experimentally are reproduced by the DFT calculations. Furthermore a neural network was constructed for reproducing the inverse scattering data (infer...
Modulation Based on Probability Density Functions
Williams, Glenn L.
2009-01-01
A proposed method of modulating a sinusoidal carrier signal to convey digital information involves the use of histograms representing probability density functions (PDFs) that characterize samples of the signal waveform. The method is based partly on the observation that when a waveform is sampled (whether by analog or digital means) over a time interval at least as long as one half cycle of the waveform, the samples can be sorted by frequency of occurrence, thereby constructing a histogram representing a PDF of the waveform during that time interval.
Mattsson, Ann Elisabet; Modine, Normand Arthur; Desjarlais, Michael Paul; Muller, Richard Partain; Sears, Mark P.; Wright, Alan Francis
2006-11-01
A finite temperature version of 'exact-exchange' density functional theory (EXX) has been implemented in Sandia's Socorro code. The method uses the optimized effective potential (OEP) formalism and an efficient gradient-based iterative minimization of the energy. The derivation of the gradient is based on the density matrix, simplifying the extension to finite temperatures. A stand-alone all-electron exact-exchange capability has been developed for testing exact exchange and compatible correlation functionals on small systems. Calculations of eigenvalues for the helium atom, beryllium atom, and the hydrogen molecule are reported, showing excellent agreement with highly converged quantumMonte Carlo calculations. Several approaches to the generation of pseudopotentials for use in EXX calculations have been examined and are discussed. The difficult problem of finding a correlation functional compatible with EXX has been studied and some initial findings are reported.
Orbital-Free Density Functional Theory for Molecular Structure Calculations
Huajie Chen; Aihui Zhou
2008-01-01
We give here an overview of the orbital-free density functional theory that is used for modeling atoms and molecules. We review typical approximations to the kinetic energy, exchange-correlation corrections to the kinetic and Hartree energies, and constructions of the pseudopotentials. We discuss numerical discretizations for the orbital-free methods and include several numerical results for illustrations.
Density Functional Approach Based on Numerically Obtained Bridge Functional
ZHOU Shi-Qi
2002-01-01
The Ornstein Zernike equation is solved with the Rogers Young approximation for bulk hard sphere fluidand Lennard-Jones fluid for several state points. Then the resulted bulk fluid radial distribution function combinedwith the test particle method is employed to determine numerically the function relationship of bridge functional as afunction of indirect correlation function. It is found that all of the calculated points from different phase space statepoints for a same type of fluid collapse onto a same smooth curve. Then the numerically obtained curve is used tosubstitute the analytic expression of the bridge functional as a function of indirect correlation function required in themethodology [J. Chem. Phys. 112 (2000) 8079] to deterrnine the density distribution of non-uniform hard spherefluid and Lennard Jones fluid. The good agreement of theoretical predictions with the computer simulation data isobtained. The present numerical procedure incorporates the knowledge of bulk fluid radial distribution function intothe constructing of the density functional approximation and makes the original methodology more accurate and moreflexible for various interaction potential fluid.
Interpretation of van der Waal density functionals
Hyldgaard, Per; Schröder, Elsebeth
2014-01-01
The nonlocal correlation energy in the van der Waals density functional (vdW-DF) method [Phys. Rev. Lett. 92, 246401 (2004); Phys. Rev. B 76, 125112 (2007); Phys. Rev. B 89, 035412 (2014)] can be interpreted in terms of a coupling of zero-point energies of characteristic modes of semilocal exchange-correlation (xc) holes. These xc holes reflect the internal functional in the framework of the vdW-DF method [Phys. Rev. B 82, 081101(2010)]. We explore the internal xc hole components, showing that they share properties with those of the generalized-gradient approximation. We use these results to illustrate the nonlocality in the vdW-DF description and analyze the vdW-DF formulation of nonlocal correlation.
Quantal density functional theory. 2. ed.
Sahni, Viraht
2016-07-01
This book is on quantal density functional theory (QDFT) which is a time-dependent local effective potential theory of the electronic structure of matter. The time-independent QDFT constitutes a special case. The 2{sup nd} edition describes the further development of the theory, and extends it to include the presence of an external magnetostatic field. The theory is based on the 'quantal Newtonian' second and first laws for the individual electron. These laws are in terms of 'classical' fields that pervade all space, and their quantal sources. The fields are separately representative of the electron correlations that must be accounted for in local potential theory. Recent developments show that irrespective of the type of external field the electrons are subject to, the only correlations beyond those due to the Pauli exclusion principle and Coulomb repulsion that need be considered are solely of the correlation-kinetic effects. Foundational to QDFT, the book describes Schroedinger theory from the new perspective of the single electron in terms of the 'quantal Newtonian' laws. Hohenberg-Kohn density functional theory (DFT), new understandings of the theory and its extension to the presence of an external uniform magnetostatic field are described. The physical interpretation via QDFT, in terms of electron correlations, of Kohn-Sham DFT, approximations to it and Slater theory are provided.
Universality principle and the development of classical density functional theory
周世琦; 张晓琪
2002-01-01
The universality principle of the free energy density functional and the ‘test particle' trick by Percus are combined to construct the approximate free energy density functional or its functional derivative. Information about the bulk fluid ralial distribution function is integrated into the density functional approximation directly for the first time in the present methodology. The physical foundation of the present methodology also applies to the quantum density functional theory.
Spectral density method to Anderson-Holstein model
Chebrolu, Narasimha Raju; Chatterjee, Ashok
2015-06-01
Two-parameter spectral density function of a magnetic impurity electron in a non-magnetic metal is calculated within the framework of the Anderson-Holstein model using the spectral density approximation method. The effect of electron-phonon interaction on the spectral function is investigated.
Nitrogenase structure and function relationships by density functional theory.
Harris, Travis V; Szilagyi, Robert K
2011-01-01
Modern density functional theory has tremendous potential with matching popularity in metalloenzymology to reveal the unseen atomic and molecular details of structural data, spectroscopic measurements, and biochemical experiments by providing insights into unobservable structures and states, while also offering theoretical justifications for observed trends and differences. An often untapped potential of this theoretical approach is to bring together diverse experimental structural and reactivity information and allow for these to be critically evaluated at the same level. This is particularly applicable for the tantalizingly complex problem of the structure and molecular mechanism of biological nitrogen fixation. In this chapter we provide a review with extensive practical details of the compilation and evaluation of experimental data for an unbiased and systematic density functional theory analysis that can lead to remarkable new insights about the structure-function relationships of the iron-sulfur clusters of nitrogenase.
Milani, Alberto; Del Zoppo, Mirella; Tommasini, Matteo; Zerbi, Giuseppe
2008-02-14
In this work, we analyze the effect of intermolecular dipole-dipole interactions on Raman spectra of polyconjugated molecules. In particular, the behavior of push-pull polyenes has been studied. By means of density functional theory (DFT) calculations on isolated molecules and dimers, we have found that both the frequencies and intensities of the strongest Raman lines (R mode) are strongly influenced by intermolecular interactions. The results have been rationalized within the effective conjugation coordinate (ECC) theory developed in the past. The calculations for different configurations have also shown that the Raman spectra are sensible to different intermolecular geometries, thus implying a possible application of vibrational spectroscopy to the study of supramolecular properties of polyconjugated systems. The comparison with the available experimental spectra confirms the results obtained with the DFT computations. Finally, a very simple mathematical model is proposed for the prediction of the Raman frequencies of interacting systems. From the knowledge of just a few quantities for the isolated molecule and of some geometrical parameters, an estimate of the frequency of the dimers can be obtained. Despite its simplicity, this model gives results in very good agreement with DFT calculations carried out explicitly on dimers in several different arrangements.
Comparison of density estimators. [Estimation of probability density functions
Kao, S.; Monahan, J.F.
1977-09-01
Recent work in the field of probability density estimation has included the introduction of some new methods, such as the polynomial and spline methods and the nearest neighbor method, and the study of asymptotic properties in depth. This earlier work is summarized here. In addition, the computational complexity of the various algorithms is analyzed, as are some simulations. The object is to compare the performance of the various methods in small samples and their sensitivity to change in their parameters, and to attempt to discover at what point a sample is so small that density estimation can no longer be worthwhile. (RWR)
Choubey, Sanjay K.; Mariadasse, Richard; Rajendran, Santhosh; Jeyaraman, Jeyakanthan
2016-12-01
Overexpression of HDAC1, a member of Class I histone deacetylase is reported to be implicated in breast cancer. Epigenetic alteration in carcinogenesis has been the thrust of research for few decades. Increased deacetylation leads to accelerated cell proliferation, cell migration, angiogenesis and invasion. HDAC1 is pronounced as the potential drug target towards the treatment of breast cancer. In this study, the biochemical potential of 6-aminonicotinamide derivatives was rationalized. Five point pharmacophore model with one hydrogen-bond acceptor (A3), two hydrogen-bond donors (D5, D6), one ring (R12) and one hydrophobic group (H8) was developed using 6-aminonicotinamide derivatives. The pharmacophore hypothesis yielded a 3D-QSAR model with correlation-coefficient (r2 = 0.977, q2 = 0.801) and it was externally validated with (r2pred = 0.929, r2cv = 0.850 and r2m = 0.856) which reveals the statistical significance of the model having high predictive power. The model was then employed as 3D search query for virtual screening against compound libraries (Zinc, Maybridge, Enamine, Asinex, Toslab, LifeChem and Specs) in order to identify novel scaffolds which can be experimentally validated to design future drug molecule. Density Functional Theory (DFT) at B3LYP/6-31G* level was employed to explore the electronic features of the ligands involved in charge transfer reaction during receptor ligand interaction. Binding free energy (ΔGbind) calculation was done using MM/GBSA which defines the affinity of ligands towards the receptor.
Carrara, Mark David
2006-04-01
The overall objective of this dissertation is the development of a modeling and simulation approach for turbulent two-phase chemically reacting flows. A new full velocity-scalar filtered mass density function (FMDF) formulation for large eddy simulation (LES) of a separated two-phase flow is developed. In this formulation several terms require modeling that include important conditionally averaged phase-coupling terms (PCT). To close the PCT a new derivation of the local instantaneous two-phase equations is presented and important identities are derived relating the PCT to surface averages. The formulation is then applied for two particle laden flow cases and solved using a full particle based Monte-Carlo numerical solution procedure. The first case is a temporally developing counter-current mixing layer dilutely seeded with evaporating water droplets. Validation studies reveal excellent agreement of the full particle method to previous hybrid FDF studies and direct numerical simulations for single-phase flows. One-way coupled simulations reveal that the overall dispersion is maximized with unity Stokes number droplets. Two-way coupled simulations reveal the advantages of two FDF approaches where the subgrid variation of droplet properties are explicitly taken into account. Comparisons of the fully-coupled FDF approach are compared to more approximate means of determining phase-coupling based on filtered properties and local and compounded global errors are assessed. The second case considered is the combustion aluminum particles. A new mechanistic model for the ignition and combustion of aluminum particulate is developed that accounts for unsteady heating, melting, heterogeneous surface reactions (HSR) and quasi-steady burning. Results of this model agree well with experimental data for overall burn rates and ignition times. Two-phase simulations of aluminum particulate seeded mixing layer reveal the variations in flame radius resulting in local extinguishment
Density functionals for the strong-interaction limit
Seidl, Michael; Perdew, John P.; Kurth, Stefan
2000-07-01
The strong-interaction limit of density-functional (DF) theory is simple and provides information required for an accurate resummation of DF perturbation theory. Here we derive the point-charge-plus-continuum (PC) model for that limit, and its gradient expansion. The exchange-correlation (xc) energy Exc[ρ]≡∫10dαWα[ρ] follows from the xc potential energies Wα at different interaction strengths α>=0 [but at fixed density ρ(r)]. For small α~0, the integrand Wα is obtained accurately from perturbation theory, but the perturbation expansion requires resummation for moderate and large α. For that purpose, we present density functionals for the coefficients in the asymptotic expansion Wα-->W∞+W'∞α-1/2 for α-->∞ in the PC model. WPC∞ arises from strict correlation, and W'PC∞ from zero-point vibration of the electrons around their strictly correlated distributions. The PC values for W∞ and W'∞ agree with those from a self-correlation-free meta-generalized gradient approximation, both for atoms and for atomization energies of molecules. We also (i) explain the difference between the PC cell and the exchange-correlation hole, (ii) present a density-functional measure of correlation strength, (iii) describe the electron localization and spin polarization energy in a highly stretched H2 molecule, and (iv) discuss the soft-plasmon instability of the low-density uniform electron gas.
Bouchard, Solène; Clémancey, Martin; Blondin, Geneviève; Bruschi, Maurizio; Charreteur, Kévin; De Gioia, Luca; Le Roy, Christine; Pétillon, François Y; Schollhammer, Philippe; Talarmin, Jean
2014-11-03
The design of the new FeMo heterobimetallic species [FeMo(CO)5(κ(2)-dppe)(μ-pdt)] is reported. Mössbauer spectroscopy and density functional theory calculations give deep insight into the electronic and structural properties of this compound.
Chemistry by Way of Density Functional Theory
Bauschlicher, Charles W., Jr.; Ricca, Alessandra; Partridge, Harry; Langohff, Stephen R.; Arnold, James O. (Technical Monitor)
1996-01-01
In this work we demonstrate that density functional theory (DFT) methods make an important contribution to understanding chemical systems and are an important additional method for the computational chemist. We report calibration calculations obtained with different functionals for the 55 G2 molecules to justify our selection of the B3LYP functional. We show that accurate geometries and vibrational frequencies obtained at the B3LYP level can be combined with traditional methods to simplify the calculation of accurate heats of formation. We illustrate the application of the B3LYP approach to a variety of chemical problems from the vibrational frequencies of polycyclic aromatic hydrocarbons to transition metal systems. We show that the B3LYP method typically performs better than the MP2 method at a significantly lower computational cost. Thus the B3LYP method allows us to extend our studies to much larger systems while maintaining a high degree of accuracy. We show that for transition metal systems, the B3LYP bond energies are typically of sufficient accuracy that they can be used to explain experimental trends and even differentiate between different experimental values. We show that for boron clusters the B3LYP energetics are not as good as for many of the other systems presented, but even in this case the B3LYP approach is able to help understand the experimental trends.
Schuetrumpf, B.; Nazarewicz, W.; Reinhard, P.-G.
2017-08-01
Background: The central depression of nucleonic density, i.e., a reduction of density in the nuclear interior, has been attributed to many factors. For instance, bubble structures in superheavy nuclei are believed to be due to the electrostatic repulsion. In light nuclei, the mechanism behind the density reduction in the interior has been discussed in terms of shell effects associated with occupations of s orbits. Purpose: The main objective of this work is to reveal mechanisms behind the formation of central depression in nucleonic densities in light and heavy nuclei. To this end, we introduce several measures of the internal nucleonic density. Through the statistical analysis, we study the information content of these measures with respect to nuclear matter properties. Method: We apply nuclear density functional theory with Skyrme functionals. Using the statistical tools of linear least square regression, we inspect correlations between various measures of central depression and model parameters, including nuclear matter properties. We study bivariate correlations with selected quantities as well as multiple correlations with groups of parameters. Detailed correlation analysis is carried out for 34Si for which a bubble structure has been reported recently, 48Ca, and N =82 , 126, and 184 isotonic chains. Results: We show that the central depression in medium-mass nuclei is very sensitive to shell effects, whereas for superheavy systems it is firmly driven by the electrostatic repulsion. An appreciable semibubble structure in proton density is predicted for 294Og, which is currently the heaviest nucleus known experimentally. Conclusion: Our correlation analysis reveals that the central density indicators in nuclei below 208Pb carry little information on parameters of nuclear matter; they are predominantly driven by shell structure. On the other hand, in the superheavy nuclei there exists a clear relationship between the central nucleonic density and symmetry energy.
General degeneracy in density functional perturbation theory
Palenik, Mark C.; Dunlap, Brett I.
2017-07-01
Degenerate perturbation theory from quantum mechanics is inadequate in density functional theory (DFT) because of nonlinearity in the Kohn-Sham potential. Herein, we develop the fully general perturbation theory for open-shell, degenerate systems in Kohn-Sham DFT, without assuming the presence of symmetry or equal occupation of degenerate orbitals. To demonstrate the resulting methodology, we apply it to the iron atom in the central field approximation, perturbed by an electric quadrupole. This system was chosen because it displays both symmetry required degeneracy, between the five 3 d orbitals, as well as accidental degeneracy, between the 3 d and 4 s orbitals. The quadrupole potential couples the degenerate 3 d and 4 s states, serving as an example of the most general perturbation.
Phases of Polonium via Density Functional Theory
Verstraete, Matthieu J.
2010-01-01
The thermodynamical properties of the main phases of metallic polonium are examined using density functional theory. The exceptional nature of the solid-solid phase transition of α to β Po is underlined: it induces a lowering in symmetry, from cubic to rhombohedral, with increasing temperature. This is explained as the result of a delicate balance between bonding and entropic effects. Overall agreement with existing experimental data is good by state-of-the-art standards. The phonons of Po present Kohn anomalies, and it is shown that the effect of spin-orbit interactions is the inverse of that in normal metals: due to the nonspherical nature of the Fermi Surface, spin-orbit effects reduce nesting and harden most phonon frequencies.
Effective potential in density matrix functional theory.
Nagy, A; Amovilli, C
2004-10-01
In the previous paper it was shown that in the ground state the diagonal of the spin independent second-order density matrix n can be determined by solving a single auxiliary equation of a two-particle problem. Thus the problem of an arbitrary system with even electrons can be reduced to a two-particle problem. The effective potential of the two-particle equation contains a term v(p) of completely kinetic origin. Virial theorem and hierarchy of equations are derived for v(p) and simple approximations are proposed. A relationship between the effective potential u(p) of the shape function equation and the potential v(p) is established.
Harper, Lenora K; Bayse, Craig A
2015-12-01
Dithiols such as British anti-lewisite (BAL, rac-2,3-dimercaptopropanol) are an important class of antidotes for the blister agent lewisite (trans-2-chlorovinyldichloroarsine) and, more generally, are chelating agents for arsenic and other toxic metals. The reaction of the vicinal thiols of BAL with lewisite through the chelation of the As(III) center has been modeled using density functional theory (DFT) and solvent-assisted proton exchange (SAPE), a microsolvation method that uses a network of water molecules to mimic the role of bulk solvent in models of aqueous phase chemical reactions. The small activation barriers for the stepwise SN2-type nucleophilic attack of BAL on lewisite (0.7-4.9kcal/mol) are consistent with the favorable leaving group properties of the chloride and the affinity of As(III) for soft sulfur nucleophiles. Small, but insignificant, differences in activation barriers were found for the initial attack of the primary versus secondary thiol of BAL and the R vs S enantiomer. An examination of the relative stability of various dithiol-lewisite complexes shows that ethanedithiols like BAL form the most favorable chelation complexes because the angles formed in five-membered ring are most consistent with the hybridization of As(III). More obtuse S-As-S angles are required for larger chelate rings, but internal As⋯N or As⋯O interactions can enhance the stability of moderate-sized rings. The low barriers for lewisite detoxification by BAL and the greater stability of the chelation complexes of small dithiols are consistent with the rapid reversal of toxicity demonstrated in previously reported animal models.
Kotani, A; Kvashnina, K O; Glatzel, P; Parlebas, J C; Schmerber, G
2012-01-20
We resolved a recent controversy on the structure of the Ce L(3) x-ray absorption spectra (XAS) of CeFe(2); i.e., which of the single impurity Anderson model (SIAM) and the first-principles band calculations based on the density-functional theory (DFT) describes more appropriately the Ce 4f states and their contribution to the Ce L(3) XAS? For this purpose, we examined the core-hole effect in Ce L(3) XAS as an application of our new method taking advantage of resonant x-ray emission spectroscopy. Our result clearly shows that the Ce L(3) XAS structure is caused by the mixed valence 4f character revealed by the core-hole potential effect as indicated by SIAM, but denies the possibility that the L(3) XAS structure is caused by the 5d band structure with a very small core-hole effect as predicted by band calculations based on DFT. © 2012 American Physical Society
Cheng, J; Sprik, M
2014-06-18
A fully atomistic model of a compact electric double layer at the rutile TiO2(1 1 0)-water interface is constructed by adding protons to bridging oxygens or removing them from H2O molecules adsorbed on terminal metal cation sites. The surface charge is compensated by F(-) or Na(+) counter ions in outer as well as inner sphere coordination. For each of the protonation states the energy of the TiO2 conduction band minimum is determined relative to the standard hydrogen electrode by computing the free energy for the combined insertion of an electron in the solid and a proton in solution away from the double layer using density functional theory based molecular dynamics methods. Interpreted as electrode potentials, this gives an estimate of the capacitance which is compared to the capacitance obtained from the difference in the average electrostatic potentials in the solid and aqueous phase. When aligned at the point of zero charge these two methods lead to almost identical potential-charge profiles. We find that inner sphere complexes have a slightly larger capacitance (0.4 F m(-2)) compared to outer sphere complexes (0.3 F m(-2)).
Marinescu, Maria; Cinteza, Ludmila Otilia; Marton, George Iuliu; Marutescu, Luminita Gabriela; Chifiriuc, Mariana-Carmen; Constantinescu, Catalin
2017-09-01
A series of 9-substituted 1,2,3,4,5,6,7,8-octahydroacridine-N(10)-oxides is evaluated against 12 bacterial and fungal strains, for their microbicidal and anti-pathogenic features. The largest spectrum of the antibacterial activity is evidenced for the nitro- (2b) and hydroxy- (5b) N-oxides, followed by the amino-N-oxide (3b). Density functional theory (DFT) modeling of the molecular structure and frontier molecular orbitals, i.e. highest occupied/lowest unoccupied molecular orbital (HOMO/LUMO), is accomplished by using the GAMESS 2012 software at M11/ktzvp level of theory in order to find their structural and electronic parameters. We show that the planarity of the molecules and the presence of the electron withdrawing group are advantages for its antimicrobial activity. Finally, we briefly present and discuss results on the processing of such compounds into thin films and hybrid structures by laser-assisted techniques, i.e. matrix-assisted pulsed laser evaporation (MAPLE) or laser-induced forward transfer (LIFT), to provide simple and environmental friendly, state-of-the-art solutions for antimicrobial/medical coatings and devices.
Nomura, K; Robledo, L M
2016-01-01
The structure of even-even neutron-rich Ru, Mo, Zr and Sr nuclei in the $A\\approx 100$ mass region is studied within the interacting boson model (IBM) with microscopic input from the self-consistent mean-field approximation based on the Gogny-D1M energy density functional. The deformation energy surface in the quadrupole deformation space $(\\beta,\\gamma)$, computed within the constrained Hartree-Fock-Bogoliubov framework, is mapped onto the expectation value of the appropriately chosen IBM Hamiltonian with configuration mixing in the boson condensate state. The mapped IBM Hamiltonian is used to study the spectroscopic properties of $^{98-114}$Ru, $^{96-112}$Mo, $^{94-110}$Zr and $^{92-108}$Sr. Several cases of $\\gamma$-soft behavior are predicted in Ru and Mo nuclei while a pronounced coexistence between strongly-prolate and weakly-oblate deformed shapes is found for Zr and Sr nuclei. The method describes well the evolution of experimental yrast and non-yrast states as well as selected $B$(E2) transition prob...
Dey, Gangotri; Elliott, Simon D
2012-09-06
We present theoretical studies based on first-principles density functional theory calculations for the possible gas-phase mechanism of the atomic layer deposition (ALD) of copper by transmetalation from common precursors such as Cu(acac)(2), Cu(hfac)(2), Cu(PyrIm(R))(2) with R = (i)Pr and Et, Cu(dmap)(2), and CuCl(2) where diethylzinc acts as the reducing agent. An effect on the geometry and reactivity of the precursors due to differences in electronegativity, steric hindrance, and conjugation present in the ligands was observed. Three reaction types, namely, disproportionation, ligand exchange, and reductive elimination, were considered that together comprise the mechanism for the formation of copper in its metallic state starting from the precursors. A parallel pathway for the formation of zinc in its metallic form was also considered. The model Cu(I) molecule Cu(2)L(2) was studied, as Cu(I) intermediates at the surface play an important role in copper deposition. Through our study, we found that accumulation of an LZnEt intermediate results in zinc contamination by the formation of either Zn(2)L(2) or metallic zinc. Ligand exchange between Cu(II) and Zn(II) should proceed through a Cu(I) intermediate, as otherwise, it would lead to a stable copper molecule rather than copper metal. Volatile ZnL(2) favors the ALD reaction, as it carries the reaction forward.
Gilson, Ronan; Durrant, Marcus C
2009-12-14
The deprotonation energies of the water ligands in a set of 40 d-block metal complexes have been calculated using density functional theory with polarized continuum model solvent corrections. The complexes include 13 aqua ions [M(OH(2))(n)](2+/3+) and a variety of aqua complexes with organic co-ligands, whose experimental pK(a) values have been reported in the literature. For comparison, the deprotonation energies of a set of 60 organic and inorganic molecules with experimental pK(a) values ranging from -25 (HSbF(6)) to +52 (C(2)H(6)) have also been calculated. Three different classes of acids are identified as giving different slopes in plots of pK(a) versus deprotonation energies; namely non-hydroxy acids, hydroxy acids, and the metal complexes. The correlation coefficients for the straight lines obtained for these three classes are 0.96, 0.97 and 0.92 respectively. Better correlations are found for sub-sets of the complexes, such as the 31 first row complexes (correlation coefficient 0.95).For several of the complexes, comparison of the calculated and observed pK(a) values, together with changes in the geometry upon optimization, offer new insights into the possible solution structures. It is concluded that DFT calculations incorporating solvent corrections can be used to give reasonable estimates of pK(a) values for the aqua ligands in a range of complex types.
Neutron skin uncertainties of Skyrme energy density functionals
Kortelainen, M; Nazarewicz, W; Birge, N; Gao, Y; Olsen, E
2013-01-01
Background: Neutron-skin thickness is an excellent indicator of isovector properties of atomic nuclei. As such, it correlates strongly with observables in finite nuclei that depend on neutron-to-proton imbalance and the nuclear symmetry energy that characterizes the equation of state of neutron-rich matter. A rich worldwide experimental program involving studies with rare isotopes, parity violating electron scattering, and astronomical observations is devoted to pinning down the isovector sector of nuclear models. Purpose: We assess the theoretical systematic and statistical uncertainties of neutron-skin thickness and relate them to the equation of state of nuclear matter, and in particular to nuclear symmetry energy parameters. Methods: We use the nuclear superfluid Density Functional Theory with several Skyrme energy density functionals and density dependent pairing. To evaluate statistical errors and their budget, we employ the statistical covariance technique. Results: We find that the errors on neutron s...
Dynamics of localized particles from density functional theory
Reinhardt, J.; Brader, J. M.
2012-01-01
A fundamental assumption of the dynamical density functional theory (DDFT) of colloidal systems is that a grand-canonical free-energy functional may be employed to generate the thermodynamic driving forces. Using one-dimensional hard rods as a model system, we analyze the validity of this key assumption and show that unphysical self-interactions of the tagged particle density fields, arising from coupling to a particle reservoir, are responsible for the excessively fast relaxation predicted by the theory. Moreover, our findings suggest that even employing a canonical functional would not lead to an improvement for many-particle systems, if only the total density is considered. We present several possible schemes to suppress these effects by incorporating tagged densities. When applied to confined systems, we demonstrate, using a simple example, that DDFT necessarily leads to delocalized tagged particle density distributions, which do not respect the fundamental geometrical constraints apparent in Brownian dynamics simulation data. The implication of these results for possible applications of DDFT to treat the glass transition are discussed.
Atomistic force field for alumina fit to density functional theory.
Sarsam, Joanne; Finnis, Michael W; Tangney, Paul
2013-11-28
We present a force field for bulk alumina (Al2O3), which has been parametrized by fitting the energies, forces, and stresses of a large database of reference configurations to those calculated with density functional theory (DFT). We use a functional form that is simpler and computationally more efficient than some existing models of alumina parametrized by a similar technique. Nevertheless, we demonstrate an accuracy of our potential that is comparable to those existing models and to DFT. We present calculations of crystal structures and energies, elastic constants, phonon spectra, thermal expansion, and point defect formation energies.
Reduced density-matrix functionals from many-particle theory
Schade, Robert; Kamil, Ebad; Blöchl, Peter
2017-07-01
In materials with strong electron correlation the proper treatment of local atomic physics described by orbital occupations is crucial. Reduced density-matrix functional theory is a natural extension of density functional theory for systems that are dominated by orbital physics. We review the current state of reduced density-matrix functional theory (RDMFT). For atomic structure relaxations or ab-initio molecular dynamics the combination of density functional theory (DFT) and dynamical mean-field theory (DMFT) possesses a number of disadvantages, like the cumbersome evaluation of forces. We therefore describe a method, DFT+RDMFT, that combines many-particle effects based on reduced density-matrix functional theory with a density functional-like framework. A recent development is the construction of density-matrix functionals directly from many-particle theory such as methods from quantum chemistry or many-particle Green's functions. We present the underlying exact theorems and describe current progress towards quantitative functionals.
Orbital functionals in density-matrix- and current-density-functional theory
Helbig, N.
2006-05-15
Density-Functional Theory (DFT), although widely used and very successful in the calculation of several observables, fails to correctly describe strongly correlated materials. In the first part of this work we, therefore, introduce reduced-densitymatrix- functional theory (RDMFT) which is one possible way to treat electron correlation beyond DFT. Within this theory the one-body reduced density matrix (1- RDM) is used as the basic variable. Our main interest is the calculation of the fundamental gap which proves very problematic within DFT. In order to calculate the fundamental gap we generalize RDMFT to fractional particle numbers M by describing the system as an ensemble of an N and an N+1 particle system (with N{<=}M{<=}N+1). For each fixed particle number, M, the total energy is minimized with respect to the natural orbitals and their occupation numbers. This leads to the total energy as a function of M. The derivative of this function with respect to the particle number has a discontinuity at integer particle number which is identical to the gap. In addition, we investigate the necessary and sufficient conditions for the 1- RDM of a system with fractional particle number to be N-representable. Numerical results are presented for alkali atoms, small molecules, and periodic systems. Another problem within DFT is the description of non-relativistic many-electron systems in the presence of magnetic fields. It requires the paramagnetic current density and the spin magnetization to be used as basic variables besides the electron density. However, electron-gas-based functionals of current-spin-density-functional Theory (CSDFT) exhibit derivative discontinuities as a function of the magnetic field whenever a new Landau level is occupied, which makes them difficult to use in practice. Since the appearance of Landau levels is, intrinsically, an orbital effect it is appealing to use orbital-dependent functionals. We have developed a CSDFT version of the optimized
Tveito, Aslak; Lines, Glenn T; Edwards, Andrew G; McCulloch, Andrew
2016-07-01
Markov models are ubiquitously used to represent the function of single ion channels. However, solving the inverse problem to construct a Markov model of single channel dynamics from bilayer or patch-clamp recordings remains challenging, particularly for channels involving complex gating processes. Methods for solving the inverse problem are generally based on data from voltage clamp measurements. Here, we describe an alternative approach to this problem based on measurements of voltage traces. The voltage traces define probability density functions of the functional states of an ion channel. These probability density functions can also be computed by solving a deterministic system of partial differential equations. The inversion is based on tuning the rates of the Markov models used in the deterministic system of partial differential equations such that the solution mimics the properties of the probability density function gathered from (pseudo) experimental data as well as possible. The optimization is done by defining a cost function to measure the difference between the deterministic solution and the solution based on experimental data. By evoking the properties of this function, it is possible to infer whether the rates of the Markov model are identifiable by our method. We present applications to Markov model well-known from the literature.
Equation of State in a Generalized Relativistic Density Functional Approach
Typel, Stefan
2015-01-01
The basic concepts of a generalized relativistic density functional approach to the equation of state of dense matter are presented. The model is an extension of relativistic mean-field models with density-dependent couplings. It includes explicit cluster degrees of freedom. The formation and dissolution of nuclei is described with the help of mass shifts. The model can be adapted to the description of finite nuclei in order to study the effect of $\\alpha$-particle correlations at the nuclear surface on the neutron skin thickness of heavy nuclei. Further extensions of the model to include quark degrees of freedom or an energy dependence of the nucleon self-energies are outlined.
Conditional Density Models for Asset Pricing
Filipovic, Damir; Hughston, Lane P.; Macrina, Andrea
2010-01-01
We model the dynamics of asset prices and associated derivatives by consideration of the dynamics of the conditional probability density process for the value of an asset at some specified time in the future. In the case where the asset is driven by Brownian motion, an associated "master equation" for the dynamics of the conditional probability density is derived and expressed in integral form. By a "model" for the conditional density process we mean a solution to the master equation along wi...
Hadjiagapiou, Ioannis A.
2014-03-01
The magnetic systems with disorder form an important class of systems, which are under intensive studies, since they reflect real systems. Such a class of systems is the spin glass one, which combines randomness and frustration. The Sherrington-Kirkpatrick Ising spin glass with random couplings in the presence of a random magnetic field is investigated in detail within the framework of the replica method. The two random variables (exchange integral interaction and random magnetic field) are drawn from a joint Gaussian probability density function characterized by a correlation coefficient ρ. The thermodynamic properties and phase diagrams are studied with respect to the natural parameters of both random components of the system contained in the probability density. The de Almeida-Thouless line is explored as a function of temperature, ρ and other system parameters. The entropy for zero temperature as well as for non zero temperatures is partly negative or positive, acquiring positive branches as h0 increases.
Open-system Kohn-Sham density functional theory.
Zhou, Yongxi; Ernzerhof, Matthias
2012-03-07
A simple model for electron transport through molecules is provided by the source-sink potential (SSP) method [F. Goyer, M. Ernzerhof, and M. Zhuang, J. Chem. Phys. 126, 144104 (2007)]. In SSP, the boundary conditions of having an incoming and outgoing electron current are enforced through complex potentials that are added to the Hamiltonian. Depending on the sign of the imaginary part of the potentials, current density is generated or absorbed. In this way, a finite system can be used to model infinite molecular electronic devices. The SSP has originally been developed for the Hückel method and subsequently it has been extended [F. Goyer and M. Ernzerhof, J. Chem. Phys. 134, 174101 (2011)] to the Hubbard model. Here we present a step towards its generalization for first-principles electronic structure theory methods. In particular, drawing on our earlier work, we discuss a new generalized density functional theory for complex non-Hermitian Hamiltonians. This theory enables us to combine SSP and Kohn-Sham theory to obtain a method for the description of open systems that exchange current density with their environment. Similarly, the Hartree-Fock method is extended to the realm of non-Hermitian, SSP containing Hamiltonians. As a proof of principle, we present the first applications of complex-density functional theory (CODFT) as well as non-Hermitian Hartree-Fock theory to electron transport through molecules. © 2012 American Institute of Physics
Franco-Pérez, Marco; Ayers, Paul W; Gázquez, José L; Vela, Alberto
2015-12-28
We explore the local and nonlocal response functions of the grand canonical potential density functional at nonzero temperature. In analogy to the zero-temperature treatment, local (e.g., the average electron density and the local softness) and nonlocal (e.g., the softness kernel) intrinsic response functions are defined as partial derivatives of the grand canonical potential with respect to its thermodynamic variables (i.e., the chemical potential of the electron reservoir and the external potential generated by the atomic nuclei). To define the local and nonlocal response functions of the electron density (e.g., the Fukui function, the linear density response function, and the dual descriptor), we differentiate with respect to the average electron number and the external potential. The well-known mathematical relationships between the intrinsic response functions and the electron-density responses are generalized to nonzero temperature, and we prove that in the zero-temperature limit, our results recover well-known identities from the density functional theory of chemical reactivity. Specific working equations and numerical results are provided for the 3-state ensemble model.
Franco-Pérez, Marco, E-mail: francopj@mcmaster.ca, E-mail: ayers@mcmaster.ca, E-mail: jlgm@xanum.uam.mx, E-mail: avela@cinvestav.mx [Department of Chemistry and Chemical Biology, McMaster University, Hamilton, Ontario L8S 4M1 (Canada); Departamento de Química, Universidad Autónoma Metropolitana-Iztapalapa, Av. San Rafael Atlixco 186, México, D.F. 09340 (Mexico); Ayers, Paul W., E-mail: francopj@mcmaster.ca, E-mail: ayers@mcmaster.ca, E-mail: jlgm@xanum.uam.mx, E-mail: avela@cinvestav.mx [Department of Chemistry and Chemical Biology, McMaster University, Hamilton, Ontario L8S 4M1 (Canada); Gázquez, José L., E-mail: francopj@mcmaster.ca, E-mail: ayers@mcmaster.ca, E-mail: jlgm@xanum.uam.mx, E-mail: avela@cinvestav.mx [Departamento de Química, Universidad Autónoma Metropolitana-Iztapalapa, Av. San Rafael Atlixco 186, México, D.F. 09340 (Mexico); Vela, Alberto, E-mail: francopj@mcmaster.ca, E-mail: ayers@mcmaster.ca, E-mail: jlgm@xanum.uam.mx, E-mail: avela@cinvestav.mx [Departamento de Química, Centro de Investigación y de Estudios Avanzados (Cinvestav), Av. Instituto Politécnico Nacional 2508, México, D.F. 07360 (Mexico)
2015-12-28
We explore the local and nonlocal response functions of the grand canonical potential density functional at nonzero temperature. In analogy to the zero-temperature treatment, local (e.g., the average electron density and the local softness) and nonlocal (e.g., the softness kernel) intrinsic response functions are defined as partial derivatives of the grand canonical potential with respect to its thermodynamic variables (i.e., the chemical potential of the electron reservoir and the external potential generated by the atomic nuclei). To define the local and nonlocal response functions of the electron density (e.g., the Fukui function, the linear density response function, and the dual descriptor), we differentiate with respect to the average electron number and the external potential. The well-known mathematical relationships between the intrinsic response functions and the electron-density responses are generalized to nonzero temperature, and we prove that in the zero-temperature limit, our results recover well-known identities from the density functional theory of chemical reactivity. Specific working equations and numerical results are provided for the 3-state ensemble model.
Nuclear charge radii: Density functional theory meets Bayesian neural networks
Utama, Raditya; Piekarewicz, Jorge
2016-01-01
The distribution of electric charge in atomic nuclei is fundamental to our understanding of the complex nuclear dynamics and a quintessential observable to validate nuclear structure models. We explore a novel approach that combines sophisticated models of nuclear structure with Bayesian neural networks (BNN) to generate predictions for the charge radii of thousands of nuclei throughout the nuclear chart. A class of relativistic energy density functionals is used to provide robust predictions for nuclear charge radii. In turn, these predictions are refined through Bayesian learning for a neural network that is trained using residuals between theoretical predictions and the experimental data. Although predictions obtained with density functional theory provide a fairly good description of experiment, our results show significant improvement (better than 40%) after BNN refinement. Moreover, these improved results for nuclear charge radii are supplemented with theoretical error bars. We have successfully demonst...
Semilocal density functional theory with correct surface asymptotics
Constantin, Lucian A.; Fabiano, Eduardo; Pitarke, J. M.; Della Sala, Fabio
2016-03-01
Semilocal density functional theory is the most used computational method for electronic structure calculations in theoretical solid-state physics and quantum chemistry of large systems, providing good accuracy with a very attractive computational cost. Nevertheless, because of the nonlocality of the exchange-correlation hole outside a metal surface, it was always considered inappropriate to describe the correct surface asymptotics. Here, we derive, within the semilocal density functional theory formalism, an exact condition for the imagelike surface asymptotics of both the exchange-correlation energy per particle and potential. We show that this condition can be easily incorporated into a practical computational tool, at the simple meta-generalized-gradient approximation level of theory. Using this tool, we also show that the Airy-gas model exhibits asymptotic properties that are closely related to those at metal surfaces. This result highlights the relevance of the linear effective potential model to the metal surface asymptotics.
Anero, Jesús G; Español, Pep; Tarazona, Pedro
2013-07-21
We present a generalization of Density Functional Theory (DFT) to non-equilibrium non-isothermal situations. By using the original approach set forth by Gibbs in his consideration of Macroscopic Thermodynamics (MT), we consider a Functional Thermo-Dynamics (FTD) description based on the density field and the energy density field. A crucial ingredient of the theory is an entropy functional, which is a concave functional. Therefore, there is a one to one connection between the density and energy fields with the conjugate thermodynamic fields. The connection between the three levels of description (MT, DFT, FTD) is clarified through a bridge theorem that relates the entropy of different levels of description and that constitutes a generalization of Mermin's theorem to arbitrary levels of description whose relevant variables are connected linearly. Although the FTD level of description does not provide any new information about averages and correlations at equilibrium, it is a crucial ingredient for the dynamics in non-equilibrium states. We obtain with the technique of projection operators the set of dynamic equations that describe the evolution of the density and energy density fields from an initial non-equilibrium state towards equilibrium. These equations generalize time dependent density functional theory to non-isothermal situations. We also present an explicit model for the entropy functional for hard spheres.
Density functional theory in the solid state.
Hasnip, Philip J; Refson, Keith; Probert, Matt I J; Yates, Jonathan R; Clark, Stewart J; Pickard, Chris J
2014-03-13
Density functional theory (DFT) has been used in many fields of the physical sciences, but none so successfully as in the solid state. From its origins in condensed matter physics, it has expanded into materials science, high-pressure physics and mineralogy, solid-state chemistry and more, powering entire computational subdisciplines. Modern DFT simulation codes can calculate a vast range of structural, chemical, optical, spectroscopic, elastic, vibrational and thermodynamic phenomena. The ability to predict structure-property relationships has revolutionized experimental fields, such as vibrational and solid-state NMR spectroscopy, where it is the primary method to analyse and interpret experimental spectra. In semiconductor physics, great progress has been made in the electronic structure of bulk and defect states despite the severe challenges presented by the description of excited states. Studies are no longer restricted to known crystallographic structures. DFT is increasingly used as an exploratory tool for materials discovery and computational experiments, culminating in ex nihilo crystal structure prediction, which addresses the long-standing difficult problem of how to predict crystal structure polymorphs from nothing but a specified chemical composition. We present an overview of the capabilities of solid-state DFT simulations in all of these topics, illustrated with recent examples using the CASTEP computer program.
Combining Molecular Dynamics and Density Functional Theory
Kaxiras, Efthimios
2015-03-01
The time evolution of a system consisting of electrons and ions is often treated in the Born-Oppenheimer approximation, with electrons in their instantaneous ground state. This approach cannot capture many interesting processes that involved excitation of electrons and its effects on the coupled electron-ion dynamics. The time scale needed to accurately resolve the evolution of electron dynamics is atto-seconds. This poses a challenge to the simulation of important chemical processes that typically take place on time scales of pico-seconds and beyond, such as reactions at surfaces and charge transport in macromolecules. We will present a methodology based on time-dependent density functional theory for electrons, and classical (Ehrenfest) dynamics for the ions, that successfully captures such processes. We will give a review of key features of the method and several applications. These illustrate how the atomic and electronic structure evolution unravels the elementary steps that constitute a chemical reaction. In collaboration with: G. Kolesov, D. Vinichenko, G. Tritsaris, C.M. Friend, Departments of Physics and of Chemistry and Chemical Biology.
Bone mineral density, adiposity and cognitive functions
Hamid R Sohrabi
2015-02-01
Full Text Available Cognitive decline and dementia due to Alzheimer’s disease have been associated with genetic, lifestyle, and environmental factors. A number of potentially modifiable risk factors should be taken into account when preventive or ameliorative interventions targeting dementia and its preclinical stages are investigated. Bone mineral density (BMD and body composition are two such potentially modifiable risk factors, and their association with cognitive decline was investigated in this study. 164 participants, aged 34 to 87 years old (62.78±9.27, were recruited for this longitudinal study and underwent cognitive and clinical examinations at baseline and after three years. Blood samples were collected for apolipoprotein E (APOE genotyping and dual energy x-ray absorptiometry (DXA was conducted at the same day as cognitive assessment. Using hierarchical regression analysis, we found that BMD and lean body mass, as measured using DXA were significant predictors of episodic memory. Age, gender, APOE status and premorbid IQ were controlled for. Specifically, the List A learning from California Verbal Learning Test was significantly associated with BMD and lean mass both at baseline and at follow up assessment. Our findings indicate that there is a significant association between BMD and lean body mass and episodic verbal learning. While the involvement of modifiable lifestyle factors in human cognitive function has been examined in different studies, there is a need for further research to understand the potential underlying mechanisms.
Numerical density-to-potential inversions in time-dependent density functional theory.
Jensen, Daniel S; Wasserman, Adam
2016-08-01
We treat the density-to-potential inverse problem of time-dependent density functional theory as an optimization problem with a partial differential equation constraint. The unknown potential is recovered from a target density by applying a multilevel optimization method controlled by error estimates. We employ a classical optimization routine using gradients efficiently computed by the discrete adjoint method. The inverted potential has both a real and imaginary part to reduce reflections at the boundaries and other numerical artifacts. We demonstrate this method on model one-dimensional systems. The method can be straightforwardly extended to a variety of numerical solvers of the time-dependent Kohn-Sham equations and to systems in higher dimensions.
Armstrong, Robert A.
2008-10-01
Pasciak and Gavis were first to propose a model of nutrient uptake that includes both physical transport by diffusion and active biological transport across the cell membrane. While the Pasciak-Gavis model is not complicated mathematically (it can be expressed in closed form as a quadratic equation), its parameters are not so easily interpretable biologically as are the parameters of the Michaelis-Menten uptake model; this lack of transparency is probably the main reason the Pasciak-Gavis model has not been adopted by ecologically oriented modelers. Here I derive a Michaelis-like approximation to the Pasciak-Gavis model, and show how the parameters of the latter map to those of the Michaelis-like model. The derived approximation differs from a pure Michaelis-Menten model in a subtle but potentially critical way: in a pure Michaelis-Menten model, the half-saturation constant for nutrient uptake is independent of the density of transporter (or "porter") proteins on the cell surface, while in the Pasciak-Gavis model and its Michaelis-like approximation, the half-saturation constant does depend on the density of porter proteins. The Pasciak-Gavis model predicts a unique relationship between cell size, nutrient concentration in the medium, the half-saturation constant of porter-limited nutrient uptake, and the resulting rate of uptake; the Michaelis-like approximation preserves the most important feature of that relationship, the size at which porter limitation gives way to diffusion limitation. Finally I discuss the implications for community structure that are implied by the Pasciak-Gavis model and its Michaelis-like approximation.
Brorsen, Kurt R; Yang, Yang; Pak, Michael V; Hammes-Schiffer, Sharon
2017-05-04
The development of approximate exchange-correlation functionals is critical for modern density functional theory. A recent analysis of atomic systems suggested that some modern functionals are straying from the path toward the exact functional because electron densities are becoming less accurate while energies are becoming more accurate since the year 2000. To investigate this trend for more chemically relevant systems, the electron densities in the bonding regions and the atomization energies are analyzed for a series of diatomic molecules with 90 different functionals. For hybrid generalized gradient approximation functionals developed since the year 2000, the errors in densities and atomization energies are decoupled; the accuracy of the energies remains relatively consistent while the accuracy of the densities varies significantly. Such decoupling is not observed for generalized gradient and meta-generalized gradient approximation functionals. Analysis of electron densities in bonding regions is found to be important for the evaluation of functionals for chemical systems.
Steady-State Density Functional Theory for Finite Bias Conductances.
Stefanucci, G; Kurth, S
2015-12-09
In the framework of density functional theory, a formalism to describe electronic transport in the steady state is proposed which uses the density on the junction and the steady current as basic variables. We prove that, in a finite window around zero bias, there is a one-to-one map between the basic variables and both local potential on as well as bias across the junction. The resulting Kohn-Sham system features two exchange-correlation (xc) potentials, a local xc potential, and an xc contribution to the bias. For weakly coupled junctions the xc potentials exhibit steps in the density-current plane which are shown to be crucial to describe the Coulomb blockade diamonds. At small currents these steps emerge as the equilibrium xc discontinuity bifurcates. The formalism is applied to a model benzene junction, finding perfect agreement with the orthodox theory of Coulomb blockade.
Aimé, Carole; Plet, Benoit; Manet, Sabine; Schmitter, Jean-Marie; Huc, Ivan; Oda, Reiko; Sauers, Ronald R; Romsted, Laurence S
2008-11-20
Understanding ion specific effects on the solution properties of association colloids is a major unsolved problem, and we are studying the chemistry of gemini surfactants in the gas-phase by mass spectrometry and density functional theory (DFT) to probe ion specific effects in the absence of water. Products from gas-phase fragmentation chemistry of dication-monoanion pairs, M2+X(-), of C16H33(CH3)2N+-(CH2)(n-) +N(CH3)2C16H33.2X(-) gemini surfactants were determined by using sequential collision induced dissociation mass spectrometry. The spacer length "n" was systematically varied (n = 2, 3, 4, and 6) for each counterion investigated (X(-) = F(-), Br(-), Cl(-), I(-), NO3(-), CF3CO2(-), and PF6(-)). The M2+X(-) pairs fragment into monocationic products from competing E2 and S N2 pathways that are readily quantified by tandem MS. The dominant reaction pathway depends on dication and anion structure because it switches from E2 to S N2 with decreasing anion basicity and increasing spacer length. For spacer lengths n = 4 and 6, the major S N2 product shifts from attack at methylene to methyl on the quaternary ammonium group. DFT calculations of gemini headgroup model bolaform salts, CH3(CH3)2N+-(CH2)(n-)+N(CH3)2CH3.2X(-) (X(-) = F(-), Cl(-), Br(-), and I(-), n = 2-4), primarily of activation enthalpies, DeltaH, but also of free energies and entropies for the dication-monoanion pairs, M2+X(-), provide qualitative explanations for the MS structure-reactivity patterns. DeltaH values for S N2 reactions are independent of X(-) type and spacer length, while E2 reactions show a significant increase in DeltaH with decreasing anion basicity and a modest increase with spacer length. Comparisons with the DeltaH values of model CH3CH2(CH3)3N+X(-) halides show that the second charge on the dicationic ion pairs does not significantly affect DeltaH and that the change in distance between the nucleophile and leaving group in the ground and transition states structures in S N2 reactions
Ions in solution: density corrected density functional theory (DC-DFT).
Kim, Min-Cheol; Sim, Eunji; Burke, Kieron
2014-05-14
Standard density functional approximations often give questionable results for odd-electron radical complexes, with the error typically attributed to self-interaction. In density corrected density functional theory (DC-DFT), certain classes of density functional theory calculations are significantly improved by using densities more accurate than the self-consistent densities. We discuss how to identify such cases, and how DC-DFT applies more generally. To illustrate, we calculate potential energy surfaces of HO·Cl(-) and HO·H2O complexes using various common approximate functionals, with and without this density correction. Commonly used approximations yield wrongly shaped surfaces and/or incorrect minima when calculated self consistently, while yielding almost identical shapes and minima when density corrected. This improvement is retained even in the presence of implicit solvent.
Ions in solution: Density Corrected Density Functional Theory (DC-DFT)
Kim, Min-Cheol; Burke, Kieron
2014-01-01
Standard density functional approximations often give questionable results for odd-electron radical complexes, with the error typically attributed to self-interaction. In density corrected density functional theory (DC-DFT), certain classes of density functional theory calculations are significantly improved by using densities more accurate than the self-consistent densities. We discuss how to identify such cases, and how DC-DFT applies more generally. To illustrate, we calculate potential energy surfaces of HO$\\cdot$Cl$^-$ and HO$\\cdot$H$_2$O complexes using various common approximate functionals, with and without this density correction. Commonly used approximations yield wrongly shaped surfaces and/or incorrect minima when calculated self consistently, while yielding almost identical shapes and minima when density corrected. This improvement is retained even in the presence of implicit solvent.
Graphene on metals: A van der Waals density functional study
Vanin, Marco; Mortensen, Jens Jørgen; Kelkkanen, Kari André;
2010-01-01
We use density functional theory (DFT) with a recently developed van der Waals density functional (vdW-DF) to study the adsorption of graphene on Co, Ni, Pd, Ag, Au, Cu, Pt, and Al(111) surfaces. In contrast to the local-density approximation (LDA) which predicts relatively strong binding for Ni...
Energy density functional for nuclei and neutron stars
Erler, J; Nazarewicz, W; Rafalski, M; Reinhard, P -G
2012-01-01
We aim to develop a nuclear energy density functional that can be simultaneously applied to finite nuclei and neutron stars. We use the self-consistent nuclear density functional theory (DFT) with Skyrme energy density functionals and covariance analysis to assess correlations between observables for finite nuclei and neutron stars. In a first step two energy functionals -- a high density energy functional giving reasonable neutron properties, and a low density functional fitted to nuclear properties -- are matched. In a second step, we optimize a new functional using exactly the same protocol as in earlier studies pertaining to nuclei but now including neutron star data. This allows direct comparisons of performance of the new functional relative to the standard one. The new functional TOV-min yields results for nuclear bulk properties (energy, r.m.s. radius, diffraction radius, surface thickness) that are of the same quality as those obtained with the established Skyrme functionals, including SV-min. When c...
Density functional calculations on hydrocarbon isodesmic reactions
Fortunelli, Alessandro; Selmi, Massimo
1994-06-01
Hartree—Fock, Hartree—Fock-plus-correlation and self-consistent Kohn—Sham calculations are performed on a set of hydrocarbon isodesmic reactions, i.e. reactions among hydrocarbons in which the number and type of carbon—carbon and carbon—hydrogen bonds is conserved. It is found that neither Hartree—Fock nor Kohn—Sham methods correctly predict standard enthalpies, Δ Hr(298 K), of these reactions, even though — for reactions involving molecules containing strained double bonds — the agreement between the theoretical estimates and the experimental values of Δ Hr seems to be improved by the self-consistent solution of the Kohn—Sham equations. The remaining discrepancies are attributed to intramolecular dispersion effects, that are not described by ordinary exchange—correlation functionals, and are eliminated by introducing corrections based on a simple semi-empirical model.
Alejandro Morales-Bayuelo
2014-01-01
Full Text Available We present a topological analysis to the inductive effect through steric and electrostatic scales of quantitative convergence. Using the molecular similarity field based in the local guantum similarity (LQS with the Topo-Geometrical Superposition Algorithm (TGSA alignment method and the chemical reactivity in the density function theory (DFT context, all calculations were carried out with Amsterdam Density Functional (ADF code, using the gradient generalized approximation (GGA and local exchange correlations PW91, in order to characterize the electronic effect by atomic size in the halogens group using a standard Slater-type-orbital basis set. In addition, in this study we introduced news molecular bonding relationships in the inductive effect and the nature of the polar character in the C–H bond taking into account the global and local reactivity descriptors such as chemical potential, hardness, electrophilicity, and Fukui functions, respectively. These descriptors are used to find new alternative considerations on the inductive effect, unlike to the binding energy and dipole moment performed in the traditional organic chemical.
Resveratrol preserves cerebrovascular density and cognitive function in aging mice
Charlotte A Oomen
2009-12-01
Full Text Available Resveratrol, a natural polyphenol abundant in grapes and red wine, has been reported to exert numerous beneficial health effects. Among others, acute neuroprotective effects of resveratrol have been reported in several models of neurodegeneration, both in vitro and in vivo. In the present study we examined the neuroprotective effects of long term dietary supplementation with resveratrol in mice on behavioral, neurochemical and cerebrovascular level. We report a preserved cognitive function in resveratrol treated aging mice, as shown by an enhanced acquisition of a spatial Y-maze task. This was paralleled by a higher microvascular density and a lower number of microvascular abnormalities in comparison to aging non-treated control animals. We found no effects of resveratrol supplementation on cholinergic cell number or fiber density. The present findings support the hypothesis that resveratrol exerts beneficial effects on the brain by maintaining cerebrovascular health. Via this mechanism resveratrol can contribute to the preservation of cognitive function during aging.
Wang, Ziyue; Zhuang, Pengfei
2017-07-01
The pion superfluid and the corresponding Goldstone and soft modes are investigated in a two-flavor quark-meson model with a functional renormalization group. By solving the flow equations for the effective potential and the meson two-point functions at finite temperature and isospin density, the critical temperature for the superfluid increases sizeably in comparison with solving the flow equation for the potential only. The spectral function for the soft mode shows clearly a transition from meson gas to quark gas with increasing temperature and a crossover from Bose-Einstein condensation to Bardeen-Cooper-Schrieffer pairing of quarks with increasing isospin density.
SURFACE SYMMETRY ENERGY OF NUCLEAR ENERGY DENSITY FUNCTIONALS
Nikolov, N; Schunck, N; Nazarewicz, W; Bender, M; Pei, J
2010-12-20
We study the bulk deformation properties of the Skyrme nuclear energy density functionals. Following simple arguments based on the leptodermous expansion and liquid drop model, we apply the nuclear density functional theory to assess the role of the surface symmetry energy in nuclei. To this end, we validate the commonly used functional parametrizations against the data on excitation energies of superdeformed band-heads in Hg and Pb isotopes, and fission isomers in actinide nuclei. After subtracting shell effects, the results of our self-consistent calculations are consistent with macroscopic arguments and indicate that experimental data on strongly deformed configurations in neutron-rich nuclei are essential for optimizing future nuclear energy density functionals. The resulting survey provides a useful benchmark for further theoretical improvements. Unlike in nuclei close to the stability valley, whose macroscopic deformability hangs on the balance of surface and Coulomb terms, the deformability of neutron-rich nuclei strongly depends on the surface-symmetry energy; hence, its proper determination is crucial for the stability of deformed phases of the neutron-rich matter and description of fission rates for r-process nucleosynthesis.
Maximum likelihood estimation for semiparametric density ratio model.
Diao, Guoqing; Ning, Jing; Qin, Jing
2012-06-27
In the statistical literature, the conditional density model specification is commonly used to study regression effects. One attractive model is the semiparametric density ratio model, under which the conditional density function is the product of an unknown baseline density function and a known parametric function containing the covariate information. This model has a natural connection with generalized linear models and is closely related to biased sampling problems. Despite the attractive features and importance of this model, most existing methods are too restrictive since they are based on multi-sample data or conditional likelihood functions. The conditional likelihood approach can eliminate the unknown baseline density but cannot estimate it. We propose efficient estimation procedures based on the nonparametric likelihood. The nonparametric likelihood approach allows for general forms of covariates and estimates the regression parameters and the baseline density simultaneously. Therefore, the nonparametric likelihood approach is more versatile than the conditional likelihood approach especially when estimation of the conditional mean or other quantities of the outcome is of interest. We show that the nonparametric maximum likelihood estimators are consistent, asymptotically normal, and asymptotically efficient. Simulation studies demonstrate that the proposed methods perform well in practical settings. A real example is used for illustration.
Covariant density functional theory: Reexamining the structure of superheavy nuclei
Agbemava, S E; Nakatsukasa, T; Ring, P
2015-01-01
A systematic investigation of even-even superheavy elements in the region of proton numbers $100 \\leq Z \\leq 130$ and in the region of neutron numbers from the proton-drip line up to neutron number $N=196$ is presented. For this study we use five most up-to-date covariant energy density functionals of different types, with a non-linear meson coupling, with density dependent meson couplings, and with density-dependent zero-range interactions. Pairing correlations are treated within relativistic Hartree-Bogoliubov (RHB) theory based on an effective separable particle-particle interaction of finite range and deformation effects are taken into account. This allows us to assess the spread of theoretical predictions within the present covariant models for the binding energies, deformation parameters, shell structures and $\\alpha$-decay half-lives. Contrary to the previous studies in covariant density functional theory, it was found that the impact of $N=172$ spherical shell gap on the structure of superheavy elemen...
Fekete, Attila; Komáromi, István
2016-12-07
A proteolytic reaction of papain with a simple peptide model substrate N-methylacetamide has been studied. Our aim was twofold: (i) we proposed a plausible reaction mechanism with the aid of potential energy surface scans and second geometrical derivatives calculated at the stationary points, and (ii) we investigated the applicability of the dispersion corrected density functional methods in comparison with the popular hybrid generalized gradient approximations (GGA) method (B3LYP) without such a correction in the QM/MM calculations for this particular problem. In the resting state of papain the ion pair and neutral forms of the Cys-His catalytic dyad have approximately the same energy and they are separated by only a small barrier. Zero point vibrational energy correction shifted this equilibrium slightly to the neutral form. On the other hand, the electrostatic solvation free energy corrections, calculated using the Poisson-Boltzmann method for the structures sampled from molecular dynamics simulation trajectories, resulted in a more stable ion-pair form. All methods we applied predicted at least a two elementary step acylation process via a zwitterionic tetrahedral intermediate. Using dispersion corrected DFT methods the thioester S-C bond formation and the proton transfer from histidine occur in the same elementary step, although not synchronously. The proton transfer lags behind (or at least does not precede) the S-C bond formation. The predicted transition state corresponds mainly to the S-C bond formation while the proton is still on the histidine Nδ atom. In contrast, the B3LYP method using larger basis sets predicts a transition state in which the S-C bond is almost fully formed and the transition state can be mainly featured by the Nδ(histidine) to N(amid) proton transfer. Considerably lower activation energy was predicted (especially by the B3LYP method) for the next amide bond breaking elementary step of acyl-enzyme formation. Deacylation appeared to
Interactive design of probability density functions for shape grammars
Dang, Minh
2015-11-02
A shape grammar defines a procedural shape space containing a variety of models of the same class, e.g. buildings, trees, furniture, airplanes, bikes, etc. We present a framework that enables a user to interactively design a probability density function (pdf) over such a shape space and to sample models according to the designed pdf. First, we propose a user interface that enables a user to quickly provide preference scores for selected shapes and suggest sampling strategies to decide which models to present to the user to evaluate. Second, we propose a novel kernel function to encode the similarity between two procedural models. Third, we propose a framework to interpolate user preference scores by combining multiple techniques: function factorization, Gaussian process regression, autorelevance detection, and l1 regularization. Fourth, we modify the original grammars to generate models with a pdf proportional to the user preference scores. Finally, we provide evaluations of our user interface and framework parameters and a comparison to other exploratory modeling techniques using modeling tasks in five example shape spaces: furniture, low-rise buildings, skyscrapers, airplanes, and vegetation.
Lovett, Ronald
1988-06-01
All predictive theories for the spatial variation of the density in an inhomogeneous system can be constructed by approximating exact, nonlinear integral equations which relate the density and pair correlation functions of the system. It is shown that the set of correct kernels in the exact integral equations for the density is on the boundary between the set of kernels for which the integral equations have no solution for the density and the set for which the integral equations have a multiplicity of solutions. Thus arbitrarily small deviations from the correct kernel can make these integral equations insoluble. A heuristic model equation is used to illustrate how the density functional problem can be so sensitive to the approximation made to the correlation function kernel and it is then shown explicitly that this behavior is realized in the relation between the density and the direct correlation function and in the lowest order BGYB equation. Functional equations are identified for the kernels in these equations which are satisified by the correct kernels, which guarantee a unique solution to the integral equations, and which provide a natural constraint on approximations which can be used in density functional theory. It is also shown that this sensitive behavior is a general property of density functional problems and that the methodology for constructing the constraints is equally general. A variety of applications of density functional theory are reviewed to illustrate practical consequences of this sensitivity.
Chemical reactivity in the framework of pair density functional theories.
Otero, Nicolás; Mandado, Marcos
2012-05-15
Chemical reactivity descriptors are derived within the framework of the pair density functional theory. These indices provide valuable information about bonding rearrangements and activating mechanisms upon electrophilic or nucleophilic reactions. Indices derived and tested in this work represent nonlocal counterparts of the local reactivity indices derived in the context of conceptual density functional theory (CDFT) and frequently used in reactivity studies; the Fukui function, the local softness and the dual descriptor. In this work, we show how these nonlocal indices provide a quantum chemical basis to explain the success of qualitative resonance models in chemical reactivity predictions. Also, local information is implicitly contained as CDFT indices are obtained by simple integration. As illustrative examples, we have considered in this work the Markovnikov's rule, the reactivity of enolate anion, the nucleophilic conjugate addition to α,β-unsaturated compounds and the electrophilic aromatic substitution of benzene derivatives. The densities used in this work were obtained with Hartree-Fock, Kohn-Sham DFT, and singles and doubles configuration interaction (CISD) approaches. Copyright © 2012 Wiley Periodicals, Inc.
Zobelli, Alberto [Laboratoire de Physique des Solides, Univ. Paris Sud, CNRS UMR, Orsay (France); Ivanovskaya, Viktoria; Wagner, Philipp; Yaya, Abu; Ewels, Chris P. [Institut des Materiaux Jean Rouxel (IMN), CNRS UMR, University of Nantes (France); Suarez-Martinez, Irene [Nanochemistry Research Institute, Curtin University of Technology, Perth, Western Australia (Australia)
2012-02-15
The density functional tight binding approach (DFTB) is well adapted for the study of point and line defects in graphene based systems. After briefly reviewing the use of DFTB in this area, we present a comparative study of defect structures, energies, and dynamics between DFTB results obtained using the dftb+ code, and density functional results using the localized Gaussian orbital code, AIMPRO. DFTB accurately reproduces structures and energies for a range of point defect structures such as vacancies and Stone-Wales defects in graphene, as well as various unfunctionalized and hydroxylated graphene sheet edges. Migration barriers for the vacancy and Stone-Wales defect formation barriers are accurately reproduced using a nudged elastic band approach. Finally we explore the potential for dynamic defect simulations using DFTB, taking as an example electron irradiation damage in graphene. DFTB-MD derived sputtering energy threshold map for a carbon atom in a graphene plane. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)
Multicomponent density-functional theory for time-dependent systems
Butriy, O.; Ebadi, H.; de Boeij, P. L.; van Leeuwen, R.; Gross, E. K. U.
2007-01-01
We derive the basic formalism of density functional theory for time-dependent electron-nuclear systems. The basic variables of this theory are the electron density in body-fixed frame coordinates and the diagonal of the nuclear N-body density matrix. The body-fixed frame transformation is carried ou
Uncertainty Quantification and Propagation in Nuclear Density Functional Theory
Schunck, N; McDonnell, J D; Higdon, D; Sarich, J; Wild, S M
2015-03-17
Nuclear density functional theory (DFT) is one of the main theoretical tools used to study the properties of heavy and superheavy elements, or to describe the structure of nuclei far from stability. While on-going eff orts seek to better root nuclear DFT in the theory of nuclear forces, energy functionals remain semi-phenomenological constructions that depend on a set of parameters adjusted to experimental data in fi nite nuclei. In this paper, we review recent eff orts to quantify the related uncertainties, and propagate them to model predictions. In particular, we cover the topics of parameter estimation for inverse problems, statistical analysis of model uncertainties and Bayesian inference methods. Illustrative examples are taken from the literature.
Geometry-based density functional theory an overview
Schmidt, M
2003-01-01
An overview of recent developments and applications of a specific density functional approach that originates from Rosenfeld's fundamental measure theory for hard spheres is given. Model systems that were treated include penetrable spheres that interact with a step function pair potential, the Widom-Rowlinson model, the Asakura-Oosawa colloid-polymer mixture, ternary mixtures of spheres, needles, and globular polymers, hard-body amphiphilic mixtures, fluids in porous media, and random sequential adsorption that describes non-equilibrium processes such as colloidal deposition and random car parking. In these systems various physical phenomena were studied, such as correlations in liquids, freezing and demixing phase behaviour, the properties of fluid interfaces with and without orientational order, and wetting and layering phenomena at walls.
Pellizzeri, Steven; Smith, Tiffany M.; Delaney, Sean P.; Korter, Timothy M.; Zubieta, Jon
2014-01-01
The previously unknown crystal structure of α,α,α‧,α‧-tetrabromo-p-xylene has been determined using single-crystal X-ray diffraction, and it was discovered that the molecular packing primarily involves electrostatic interactions between neighboring molecules. Due to the unusual nature of the packing in this system, the vibrational motions were investigated. The low energy lattice and molecular vibrations unique to molecular crystals were measured in the terahertz (THz) region (10-100 cm-1). These vibrational motions were then reproduced using solid-state density functional theory (DFT) as implemented in CRYSTAL09, and it was found that the majority of the motions in this region involve either whole molecular translation or molecular scissoring.
Krishtal, Alisa; Sinha, Debalina; Genova, Alessandro; Pavanello, Michele
2015-05-01
Subsystem density-functional theory (DFT) is an emerging technique for calculating the electronic structure of complex molecular and condensed phase systems. In this topical review, we focus on some recent advances in this field related to the computation of condensed phase systems, their excited states, and the evaluation of many-body interactions between the subsystems. As subsystem DFT is in principle an exact theory, any advance in this field can have a dual role. One is the possible applicability of a resulting method in practical calculations. The other is the possibility of shedding light on some quantum-mechanical phenomenon which is more easily treated by subdividing a supersystem into subsystems. An example of the latter is many-body interactions. In the discussion, we present some recent work from our research group as well as some new results, casting them in the current state-of-the-art in this review as comprehensively as possible.
Density functional study of ferromagnetism in alkali metal thin films
Prasenjit Sen
2010-04-01
Electronic and magnetic structures of (1 0 0) films of K and Cs, having thicknesses of one to seven layers, are calculated within the plane-wave projector augmented wave (PAW) formalism of the density functional theory (DFT), using both local spin density approximation (LSDA) and the PW91 generalized gradient approximation (GGA). Only a six-layer Cs film is found to have a ferromagnetic (FM) state which is degenerate with a paramagnetic (PM) state within the accuracy of these calculations. These results are compared with those obtained from calculations on a finite-thickness uniform jellium model (UJM), and it is argued that within LSDA or GGA, alkali metal thin films cannot be claimed to have an FM ground state. Relevance of these results to the experiments on transition metal-doped alkali metal thin films and bulk hosts are also discussed.
Applications of large-scale density functional theory in biology
Cole, Daniel J.; Hine, Nicholas D. M.
2016-10-01
Density functional theory (DFT) has become a routine tool for the computation of electronic structure in the physics, materials and chemistry fields. Yet the application of traditional DFT to problems in the biological sciences is hindered, to a large extent, by the unfavourable scaling of the computational effort with system size. Here, we review some of the major software and functionality advances that enable insightful electronic structure calculations to be performed on systems comprising many thousands of atoms. We describe some of the early applications of large-scale DFT to the computation of the electronic properties and structure of biomolecules, as well as to paradigmatic problems in enzymology, metalloproteins, photosynthesis and computer-aided drug design. With this review, we hope to demonstrate that first principles modelling of biological structure-function relationships are approaching a reality.
García-Aldea, David; Alvarellos, J. E.
2009-03-01
We present several nonlocal exchange energy density functionals that reproduce the linear response function of the free electron gas. These nonlocal functionals are constructed following a similar procedure used previously for nonlocal kinetic energy density functionals by Chac'on-Alvarellos-Tarazona, Garc'ia-Gonz'alez et al., Wang-Govind-Carter and Garc'ia-Aldea-Alvarellos. The exchange response function is not known but we have used the approximate response function developed by Utsumi and Ichimaru, even we must remark that the same ansatz can be used to reproduce any other response function with the same scaling properties. We have developed two families of new nonlocal functionals: one is constructed with a mathematical structure based on the LDA approximation -- the Dirac functional for the exchange - and for the second one the structure of the second order gradient expansion approximation is took as a model. The functionals are constructed is such a way that they can be used in localized systems (using real space calculations) and in extended systems (using the momentum space, and achieving a quasilinear scaling with the system size if a constant reference electron density is defined).
Nuclear level density: Shell-model approach
Sen'kov, Roman; Zelevinsky, Vladimir
2016-06-01
Knowledge of the nuclear level density is necessary for understanding various reactions, including those in the stellar environment. Usually the combinatorics of a Fermi gas plus pairing is used for finding the level density. Recently a practical algorithm avoiding diagonalization of huge matrices was developed for calculating the density of many-body nuclear energy levels with certain quantum numbers for a full shell-model Hamiltonian. The underlying physics is that of quantum chaos and intrinsic thermalization in a closed system of interacting particles. We briefly explain this algorithm and, when possible, demonstrate the agreement of the results with those derived from exact diagonalization. The resulting level density is much smoother than that coming from conventional mean-field combinatorics. We study the role of various components of residual interactions in the process of thermalization, stressing the influence of incoherent collision-like processes. The shell-model results for the traditionally used parameters are also compared with standard phenomenological approaches.
Atomic volumes and polarizabilities in density-functional theory.
Kannemann, Felix O; Becke, Axel D
2012-01-21
Becke and Johnson introduced an ad hoc definition of atomic volume [J. Chem. Phys. 124, 014204 (2006)] in order to obtain atom-in-molecule polarizabilities from free-atom polarizabilities in their nonempirical exchange-hole dipole moment model of dispersion interactions. Here we explore the dependence of Becke-Johnson atomic volumes on basis sets and density-functional approximations and provide reference data for all atoms H-Lr. A persuasive theoretical foundation for the Becke-Johnson definition is also provided.
Orbital nodal surfaces: Topological challenges for density functionals
Aschebrock, Thilo; Armiento, Rickard; Kümmel, Stephan
2017-06-01
Nodal surfaces of orbitals, in particular of the highest occupied one, play a special role in Kohn-Sham density-functional theory. The exact Kohn-Sham exchange potential, for example, shows a protruding ridge along such nodal surfaces, leading to the counterintuitive feature of a potential that goes to different asymptotic limits in different directions. We show here that nodal surfaces can heavily affect the potential of semilocal density-functional approximations. For the functional derivatives of the Armiento-Kümmel (AK13) [Phys. Rev. Lett. 111, 036402 (2013), 10.1103/PhysRevLett.111.036402] and Becke88 [Phys. Rev. A 38, 3098 (1988), 10.1103/PhysRevA.38.3098] energy functionals, i.e., the corresponding semilocal exchange potentials, as well as the Becke-Johnson [J. Chem. Phys. 124, 221101 (2006), 10.1063/1.2213970] and van Leeuwen-Baerends (LB94) [Phys. Rev. A 49, 2421 (1994), 10.1103/PhysRevA.49.2421] model potentials, we explicitly demonstrate exponential divergences in the vicinity of nodal surfaces. We further point out that many other semilocal potentials have similar features. Such divergences pose a challenge for the convergence of numerical solutions of the Kohn-Sham equations. We prove that for exchange functionals of the generalized gradient approximation (GGA) form, enforcing correct asymptotic behavior of the potential or energy density necessarily leads to irregular behavior on or near orbital nodal surfaces. We formulate constraints on the GGA exchange enhancement factor for avoiding such divergences.
Semilocal exchange hole with an application to range-separation density functional
Tao, Jianmin; Scuseria, Gustavo E
2016-01-01
Exchange-correlation hole is a central concept in density functional theory. It not only provides justification for an exchange-correlation energy functional, but also serves as a local ingredient in nonlocal range-separation density functional. However, due to the nonlocal nature, modelig the conventional exact exchange hole presents a great challenge to density functional theory. In this work, we propose a semilocal exchange hole underlying the Tao-Perdew-Staroverov-Scuseria (TPSS) meta-GGA functional. The present model is distinct from previous models at small separation between an electron and the hole around the electron. It is also different in the way it interpolates between the rapidly varying iso-orbital density and the slowly varying density, which is determined by the wave vector analysis based on the exactly solvable infinite barrier model for jellium surface. Our numerical tests show that the exchange hole generated from this model mimics the conventional exact exchange hole quite well for atoms....
Paul W Ayers; Mel Levy
2005-09-01
Using the constrained search and Legendre-transform formalisms, one can derive ``generalized” density-functional theories, in which the fundamental variable is either the electron pair density or the second-order reduced density matrix. In both approaches, the -representability problem is solved by the functional, and the variational principle is with respect to all pair densities (density matrices) that are nonnegative and appropriately normalized. The Legendre-transform formulation provides a lower bound on the constrained-search functional. Noting that experience in density-functional and density-matrix theories suggests that it is easier to approximate functionals than it is to approximate the set of -representable densities sheds some light on the significance of this work.
Exact conditions on the temperature dependence of density functionals
Burke, Kieron; Grabowski, Paul E; Pribram-Jones, Aurora
2015-01-01
Universal exact conditions guided the construction of most ground-state density functional approximations in use today. We derive the relation between the entropy and Mermin free energy density functionals for thermal density functional theory. Both the entropy and sum of kinetic and electron-electron repulsion functionals are shown to be monotonically increasing with temperature, while the Mermin functional is concave downwards. Analogous relations are found for both exchange and correlation. The importance of these conditions is illustrated in two extremes: the Hubbard dimer and the uniform gas.
Exact conditions on the temperature dependence of density functionals
Burke, K.; Smith, J. C.; Grabowski, P. E.; Pribram-Jones, A.
2016-05-01
Universal exact conditions guided the construction of most ground-state density functional approximations in use today. We derive the relation between the entropy and Mermin free energy density functionals for thermal density functional theory. Both the entropy and sum of kinetic and electron-electron repulsion functionals are shown to be monotonically increasing with temperature, while the Mermin functional is concave downwards. Analogous relations are found for both exchange and correlation. The importance of these conditions is illustrated in two extremes: the Hubbard dimer and the uniform gas.
Density-dependence of functional spiking networks in vitro
Ham, Michael I [Los Alamos National Laboratory; Gintautuas, Vadas [Los Alamos National Laboratory; Rodriguez, Marko A [Los Alamos National Laboratory; Bettencourt, Luis M A [Los Alamos National Laboratory; Bennett, Ryan [UNIV OF NORTH TEXAS; Santa Maria, Cara L [UNIV OF NORTH TEXAS
2008-01-01
During development, the mammalian brain differentiates into specialized regions with unique functional abilities. While many factors contribute to this functional specialization, we explore the effect neuronal density can have on neuronal interactions. Two types of networks, dense (50,000 neurons and glia support cells) and sparse (12,000 neurons and glia support cells), are studied. A competitive first response model is applied to construct activation graphs that represent pairwise neuronal interactions. By observing the evolution of these graphs during development in vitro we observe that dense networks form activation connections earlier than sparse networks, and that link-!llltropy analysis of the resulting dense activation graphs reveals that balanced directional connections dominate. Information theoretic measures reveal in addition that early functional information interactions (of order 3) are synergetic in both dense and sparse networks. However, during development in vitro, such interactions become redundant in dense, but not sparse networks. Large values of activation graph link-entropy correlate strongly with redundant ensembles observed in the dense networks. Results demonstrate differences between dense and sparse networks in terms of informational groups, pairwise relationships, and activation graphs. These differences suggest that variations in cell density may result in different functional specialization of nervous system tissue also in vivo.
A density functional for sparse matter
Langreth, D.C.; Lundqvist, Bengt; Chakarova-Kack, S.D.;
2009-01-01
forces in molecules, to adsorbed molecules, like benzene, naphthalene, phenol and adenine on graphite, alumina and metals, to polymer and carbon nanotube (CNT) crystals, and hydrogen storage in graphite and metal-organic frameworks (MOFs), and to the structure of DNA and of DNA with intercalators......Sparse matter is abundant and has both strong local bonds and weak nonbonding forces, in particular nonlocal van der Waals (vdW) forces between atoms separated by empty space. It encompasses a broad spectrum of systems, like soft matter, adsorption systems and biostructures. Density...
Nuclear charge radii: density functional theory meets Bayesian neural networks
Utama, R.; Chen, Wei-Chia; Piekarewicz, J.
2016-11-01
The distribution of electric charge in atomic nuclei is fundamental to our understanding of the complex nuclear dynamics and a quintessential observable to validate nuclear structure models. The aim of this study is to explore a novel approach that combines sophisticated models of nuclear structure with Bayesian neural networks (BNN) to generate predictions for the charge radii of thousands of nuclei throughout the nuclear chart. A class of relativistic energy density functionals is used to provide robust predictions for nuclear charge radii. In turn, these predictions are refined through Bayesian learning for a neural network that is trained using residuals between theoretical predictions and the experimental data. Although predictions obtained with density functional theory provide a fairly good description of experiment, our results show significant improvement (better than 40%) after BNN refinement. Moreover, these improved results for nuclear charge radii are supplemented with theoretical error bars. We have successfully demonstrated the ability of the BNN approach to significantly increase the accuracy of nuclear models in the predictions of nuclear charge radii. However, as many before us, we failed to uncover the underlying physics behind the intriguing behavior of charge radii along the calcium isotopic chain.
Modeling density segregation in granular flow
Xiao, Hongyi; Lueptow, Richard; Umbanhowar, Paul
2015-11-01
A recently developed continuum-based model accurately predicts segregation in flows of granular mixtures varying in particle size by considering the interplay of advection, diffusion and segregation. In this research, we extend the domain of the model to include density driven segregation. Discrete Element Method (DEM) simulations of density bidisperse flows of mono-sized particles in a quasi-2D bounded heap were performed to determine the dependence of the density driven segregation velocity on local shear rate, particle concentration, and a segregation length which scales with the particle size and the logarithm of the density ratio. With these inputs, the model yields theoretical predictions of density segregation patterns that quantitatively match the DEM simulations over a range of density ratios (1.11-3.33) and flow rates (19.2-113.6 cm3/s). Matching experiments with various combinations of glass, steel and ceramic particles were also performed which reproduced the segregation patterns obtained in both the simulations and the theory.
Xia, Junchao; Carter, Emily
2014-03-01
We propose a density decomposition scheme using a Wang-Govind-Carter (WGC)-based kinetic energy density functional (KEDF) to accurately and efficiently simulate covalent systems within orbital-free (OF) density functional theory (DFT). By using a local, density-dependent scale function, the total density is decomposed into a localized density within covalent bond regions and a flattened delocalized density, with the former described by semilocal KEDFs and the latter treated by the WGC KEDF. The new model predicts reasonable equilibrium volumes, bulk moduli, and phase ordering energies for various semiconductors compared to Kohn-Sham (KS) DFT benchmarks. The surface energy of Si(100) also agrees well with KSDFT. We further apply the model to study mechanical properties of Li-Si alloys, which have been recently recognized as a promising candidate for next-generation anodes of Li-ion batteries with outstanding capacity. We study multiple crystalline Li-Si alloys. The WGCD KEDF predicts accurate cell lattice vectors, equilibrium volumes, elastic moduli, electron densities, alloy formation and Li adsorption energies. Because of its quasilinear scaling, coupled with the level of accuracy shown here, OFDFT appears quite promising for large-scale simulation of such materials phenomena. Office of Naval Research, National Science Foundation, Tigress High Performance Computing Center.
Introduction to Classical Density Functional Theory by a Computational Experiment
Jeanmairet, Guillaume; Levy, Nicolas; Levesque, Maximilien; Borgis, Daniel
2014-01-01
We propose an in silico experiment to introduce the classical density functional theory (cDFT). Density functional theories, whether quantum or classical, rely on abstract concepts that are nonintuitive; however, they are at the heart of powerful tools and active fields of research in both physics and chemistry. They led to the 1998 Nobel Prize in…
Charge transfer in time-dependent density functional theory
Maitra, Neepa T.
2017-10-01
Charge transfer plays a crucial role in many processes of interest in physics, chemistry, and bio-chemistry. In many applications the size of the systems involved calls for time-dependent density functional theory (TDDFT) to be used in their computational modeling, due to its unprecedented balance between accuracy and efficiency. However, although exact in principle, in practise approximations must be made for the exchange-correlation functional in this theory, and the standard functional approximations perform poorly for excitations which have a long-range charge-transfer component. Intense progress has been made in developing more sophisticated functionals for this problem, which we review. We point out an essential difference between the properties of the exchange-correlation kernel needed for an accurate description of charge-transfer between open-shell fragments and between closed-shell fragments. We then turn to charge-transfer dynamics, which, in contrast to the excitation problem, is a highly non-equilibrium, non-perturbative, process involving a transfer of one full electron in space. This turns out to be a much more challenging problem for TDDFT functionals. We describe dynamical step and peak features in the exact functional evolving over time, that are missing in the functionals currently used. The latter underestimate the amount of charge transferred and manifest a spurious shift in the charge transfer resonance position. We discuss some explicit examples.
Molecular density functional theory of water including density-polarization coupling.
Jeanmairet, Guillaume; Levy, Nicolas; Levesque, Maximilien; Borgis, Daniel
2016-06-22
We present a three-dimensional molecular density functional theory of water derived from first-principles that relies on the particle's density and multipolar polarization density and includes the density-polarization coupling. This brings two main benefits: (i) scalar density and vectorial multipolar polarization density fields are much more tractable and give more physical insight than the full position and orientation densities, and (ii) it includes the full density-polarization coupling of water, that is known to be non-vanishing but has never been taken into account. Furthermore, the theory requires only the partial charge distribution of a water molecule and three measurable bulk properties, namely the structure factor and the Fourier components of the longitudinal and transverse dielectric susceptibilities.
Molecular density functional theory of water including density-polarization coupling
Jeanmairet, Guillaume; Levesque, Maximilien; Borgis, Daniel
2016-01-01
We present a three-dimensional molecular density functional theory (MDFT) of water derived from first-principles that relies on the particle's density and multipolar polarization density and includes the density-polarization coupling. This brings two main benefits: ($i$) a scalar density and a vectorial multipolar polarization density fields are much more tractable and give more physical insight than the full position and orientation densities, and ($ii$) it includes the full density-polarization coupling of water, that is known to be non-vanishing but has never been taken into account. Furthermore, the theory requires only the partial charge distribution of a water molecule and three measurable bulk properties, namely the structure factor and the Fourier components of the longitudinal and transverse dielectric susceptibilities.
Spin constraints on nuclear energy density functionals
Robledo, L M; Bertsch, G F
2013-01-01
The Gallagher-Moszkowski rule in the spectroscopy of odd-odd nuclei imposes a new spin constraint on the energy functionals for self-consistent mean field theory. The commonly used parameterization of the effective three-body interaction in the Gogny and Skyrme families of energy functionals is ill-suited to satisfy the spin constraint. In particular, the Gogny parameterization of the three-body interaction has the opposite spin dependence to that required by the observed spectra. The two-body part has a correct sign, but in combination the rule is violated as often as not. We conclude that a new functional form is needed for the effective three-body interaction that can take into better account the different spin-isospin channels of the interaction.
Van Kuiken, Benjamin E.; Valiev, Marat; Daifuku, Stephanie L.; Bannan, Caitlin; Strader, Matthew L.; Cho, Hana; Huse, N.; Schoenlein, R. W.; Govind, Niranjan; Khalil, Munira
2013-05-01
Ruthenium L2,3-edge X-ray absorption (XA) spectroscopy probes transitions from core 2p orbitals to the 4d levels of the atom and is a powerful tool for interrogating the local electronic and molecular structure around the metal atom. However, a molecular-level interpretation of the Ru L2,3-edge spectral lineshapes is often complicated by spin–orbit coupling (SOC) and multiplet effects. In this study, we develop spin-free time-dependent density functional theory (TDDFT) as a viable and predictive tool to simulate the Ru L3-edge spectra. We successfully simulate and analyze the ground state Ru L3-edge XA spectra of a series of RuII and RuIII complexes: [Ru(NH3)6]2+/3+, [Ru(CN)6]4-/3-, [RuCl6]4-/3-, and the ground (1A1) and photoexcited (3MLCT) transient states of [Ru(bpy)3]2+ and Ru(dcbpy)2(NCS)2 (termed N3). The TDDFT simulations reproduce all the experimentally observed features in Ru L3-edge XA spectra. The advantage of using TDDFT to assign complicated Ru L3-edge spectra is illustrated by its ability to identify ligand specific charge transfer features in complex molecules. We conclude that the B3LYP functional is the most reliable functional for accurately predicting the location of charge transfer features in these spectra. Experimental and simulated Ru L3-edge XA spectra are presented for the transition metal mixed-valence dimers [(NC)5MII-CN-RuIII(NH3)5]- (where M = Fe or Ru) dissolved in water. We explore the spectral signatures of electron delocalization in Ru L3-edge XA spectroscopy and our simulations reveal that the inclusion of explicit solvent molecules is crucial for reproducing the experimentally determined valencies, highlighting the importance of the role of the solvent in transition metal charge transfer chemistry.
Density contrast indicators in cosmological dust models
Filipe C Mena; Reza Tavakol
2000-10-01
We discuss ways of quantifying structuration in relativistic cosmological settings, by employing a family of covariant density constrast indicators. We study the evolution of these indicators with time in the context of inhomogeneous Szekeres models. We ﬁnd that different observers (having either different spatial locations or different indicators) see different evolutions for the density contrast, which may or may not be monotonically increasing with time. We also ﬁnd that monotonicity seems to be related to the initial conditions of the model, which may be of potential interest in connection with debates regarding gravitational entropy and the arrow of time.
Dynamic density functional theory with hydrodynamic interactions and fluctuations
Donev, Aleksandar, E-mail: donev@courant.nyu.edu; Vanden-Eijnden, Eric, E-mail: eve2@courant.nyu.edu [Courant Institute of Mathematical Sciences, New York University, New York, New York 10012 (United States)
2014-06-21
We derive a closed equation for the empirical concentration of colloidal particles in the presence of both hydrodynamic and direct interactions. The ensemble average of our functional Langevin equation reproduces known deterministic Dynamic Density Functional Theory (DDFT) [M. Rex and H. Löwen, “Dynamical density functional theory with hydrodynamic interactions and colloids in unstable traps,” Phys. Rev. Lett. 101(14), 148302 (2008)], and, at the same time, it also describes the microscopic fluctuations around the mean behavior. We suggest separating the ideal (non-interacting) contribution from additional corrections due to pairwise interactions. We find that, for an incompressible fluid and in the absence of direct interactions, the mean concentration follows Fick's law just as for uncorrelated walkers. At the same time, the nature of the stochastic terms in fluctuating DDFT is shown to be distinctly different for hydrodynamically-correlated and uncorrelated walkers. This leads to striking differences in the behavior of the fluctuations around Fick's law, even in the absence of pairwise interactions. We connect our own prior work [A. Donev, T. G. Fai, and E. Vanden-Eijnden, “A reversible mesoscopic model of diffusion in liquids: from giant fluctuations to Fick's law,” J. Stat. Mech.: Theory Exp. (2014) P04004] on fluctuating hydrodynamics of diffusion in liquids to the DDFT literature, and demonstrate that the fluid cannot easily be eliminated from consideration if one wants to describe the collective diffusion in colloidal suspensions.
BUILDING A UNIVERSAL NUCLEAR ENERGY DENSITY FUNCTIONAL (UNEDF)
Nazarewicz, Witold
2012-07-01
The long-term vision initiated with UNEDF is to arrive at a comprehensive, quantitative, and unified description of nuclei and their reactions, grounded in the fundamental interactions between the constituent nucleons. We seek to replace current phenomenological models of nuclear structure and reactions with a well-founded microscopic theory that delivers maximum predictive power with well-quantified uncertainties. Specifically, the mission of this project has been three-fold: First, to find an optimal energy density functional (EDF) using all our knowledge of the nucleonic Hamiltonian and basic nuclear properties. Second, to apply the EDF theory and its extensions to validate the functional using all the available relevant nuclear structure and reaction data. Third, to apply the validated theory to properties of interest that cannot be measured, in particular the properties needed for reaction theory.
Calculations of Optical Rotation from Density Functional Theory
António Canal Neto; Francisco Elias Jorge
2007-01-01
Density function theory calculations of frequency-dependent optical rotations [α]ω for three rigid chiral molecules are reported. Calculations have been carried out at the sodium D line frequency, using the ADZP basis set and a wide variety of functionals. Gauge-invariant atomic orbitals are used to guarantee origin-independent values of [α]D. In addition, study of geometry dependence of [α]D. Is reported. Using the geometries optimized at the B3LYP/ADZP level, the mean absolute deviation of B3LYP/ADZP and experimental [α]D values yields 60.1°/(dm g/cm3). According to our knowledge, this value has not been achieved until now with any other model.
The benchmark of gutzwiller density functional theory in hydrogen systems
Yao, Y.; Wang, Cai-Zhuang; Ho, Kai-Ming
2012-02-23
We propose an approximate form of the exchange-correlation energy functional for the Gutzwiller density functional theory. It satisfies certain physical constraints in both weak and strong electron correlation limits. We benchmark the Gutzwiller density functional approximation in the hydrogen systems, where the static correlation error is shown to be negligible. The good transferability is demonstrated by applications to the hydrogen molecule and some crystal structures.
The Benchmark of Gutzwiller Density Functional Theory in Hydrogen Systems
Yao, Yongxin; Wang, Cai-Zhuang; Ho, Kai-Ming
2011-01-13
We propose an approximate form of the exchange-correlation energy functional for the Gutzwiller density functional theory. It satisfies certain physical constraints in both weak and strong electron correlation limits. We benchmark the Gutzwiller density functional approximation in the hydrogen systems, where the static correlation error is shown to be negligible. The good transferability is demonstrated by applications to the hydrogen molecule and some crystal structures. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012
Propulsion Physics Using the Chameleon Density Model
Robertson, Glen A.
2011-01-01
To grow as a space faring race, future spaceflight systems will require a new theory of propulsion. Specifically one that does not require mass ejection without limiting the high thrust necessary to accelerate within or beyond our solar system and return within a normal work period or lifetime. The Chameleon Density Model (CDM) is one such model that could provide new paths in propulsion toward this end. The CDM is based on Chameleon Cosmology a dark matter theory; introduced by Khrouy and Weltman in 2004. Chameleon as it is hidden within known physics, where the Chameleon field represents a scalar field within and about an object; even in the vacuum. The CDM relates to density changes in the Chameleon field, where the density changes are related to matter accelerations within and about an object. These density changes in turn change how an object couples to its environment. Whereby, thrust is achieved by causing a differential in the environmental coupling about an object. As a demonstration to show that the CDM fits within known propulsion physics, this paper uses the model to estimate the thrust from a solid rocket motor. Under the CDM, a solid rocket constitutes a two body system, i.e., the changing density of the rocket and the changing density in the nozzle arising from the accelerated mass. Whereby, the interactions between these systems cause a differential coupling to the local gravity environment of the earth. It is shown that the resulting differential in coupling produces a calculated value for the thrust near equivalent to the conventional thrust model used in Sutton and Ross, Rocket Propulsion Elements. Even though imbedded in the equations are the Universe energy scale factor, the reduced Planck mass and the Planck length, which relates the large Universe scale to the subatomic scale.
Downing, C A; Ahmady, B; Catlow, C R A; de Leeuw, N H
2013-07-13
There is no consensus as yet to account for the significant presence of water on the terrestrial planets, but suggested sources include direct hydrogen adsorption from the parent molecular cloud after the planets' formation, and delivery of hydrous material via comets or asteroids external to the zone of the terrestrial planets. Alternatively, a more recent idea is that water may have directly adsorbed onto the interstellar dust grains involved in planetary formation. In this work, we use electronic structure calculations based on the density functional theory to investigate and compare the bulk and {010} surface structures of the magnesium and iron end-members of the silicate mineral olivine, namely forsterite and fayalite, respectively. We also report our results on the adsorption of atomic hydrogen at the mineral surfaces, where our calculations show that there is no activation barrier to the adsorption of atomic hydrogen at these surfaces. Furthermore, different surface sites activate the atom to form either adsorbed hydride or proton species in the form of hydroxy groups on the same surface, which indicates that these mineral surfaces may have acted as catalytic sites in the immobilization and reaction of hydrogen atoms to form dihydrogen gas or water molecules.
Modelling spatial density using continuous wavelet transforms
D Sudheer Reddy; N Gopal Reddy; A K Anilkumar
2013-02-01
Due to increase in the satelite launch activities from many countries around the world the orbital debris issue has become a major concern for the space agencies to plan a collision-free orbit design. The risk of collisions is calculated using the in situ measurements and available models. Spatial density models are useful in understanding the long-term likelihood of a collision in a particular region of space and also helpful in pre-launch orbit planning. In this paper, we present a method of estimating model parameters such as number of peaks and peak locations of spatial density model using continuous wavelets. The proposed methodology was experimented with two line element data and the results are presented.
Direct recursive identification of the Preisach hysteresis density function
Ruderman, Michael
2013-12-01
In this paper, a novel direct method of recursive identification of the Preisach hysteresis density function is proposed. Using the discrete dynamic Preisach model, which is a state-space realization of the classical scalar Preisach model, the method is designed based on the output increment error. After giving the general formulation, the identification scheme implemented for a discretized Preisach plane is introduced and evaluated through the use of numerical simulations. Two cases of Gaussian mixtures are considered for mapping the hysteresis system to be identified. The parameter convergence is shown for a low-pass filtered white-noise input. Further, the proposed identification method is applied to a magnetism-related application example, where the flux linkage hysteresis of a proportional solenoid is assumed from the measurements, and then the inverse of a standard demagnetization procedure is utilized as the identification sequence.
Descriptions of carbon isotopes within the energy density functional theory
Ismail, Atef [Fundamental and Applied Sciences Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronoh, Perak, Malaysia and Department of Physics, Al-Azhar University, 71524 Assiut (Egypt); Cheong, Lee Yen; Yahya, Noorhana [Fundamental and Applied Sciences Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronoh, Perak (Malaysia); Tammam, M. [Department of Physics, Al-Azhar University, 71524 Assiut (Egypt)
2014-10-24
Within the energy density functional (EDF) theory, the structure properties of Carbon isotopes are systematically studied. The shell model calculations are done for both even-A and odd-A nuclei, to study the structure of rich-neutron Carbon isotopes. The EDF theory indicates the single-neutron halo structures in {sup 15}C, {sup 17}C and {sup 19}C, and the two-neutron halo structures in {sup 16}C and {sup 22}C nuclei. It is also found that close to the neutron drip-line, there exist amazing increase in the neutron radii and decrease on the binding energies BE, which are tightly related with the blocking effect and correspondingly the blocking effect plays a significant role in the shell model configurations.
Density functional theory for inhomogeneous associating chain fluids.
Bryk, P; Sokołowski, S; Pizio, O
2006-07-14
We propose a nonlocal density functional theory for associating chain molecules. The chains are modeled as tangent spheres, which interact via Lennard-Jones (12,6) attractive interactions. A selected segment contains additional, short-ranged, highly directional interaction sites. The theory incorporates an accurate treatment of the chain molecules via the intramolecular potential formalism and should accurately describe systems with strongly varying external fields, e.g., attractive walls. Within our approach we investigate the structure of the liquid-vapor interface and capillary condensation of a simple model of associating chains with only one associating site placed on the first segment. In general, the properties of inhomogeneous associating chains depend on the association energy. Similar to the bulk systems we find the behavior of associating chains of a given length to be in between that for the nonassociating chains of the same length and that for the nonassociating chains twice as large.
Differential Density Statistics of Galaxy Distribution and the Luminosity Function
Albani, V V L; Ribeiro, M B; Stöger, W R; Albani, Vinicius V. L.; Iribarrem, Alvaro S.; Ribeiro, Marcelo B.; Stoeger, William R.
2006-01-01
This paper uses data obtained from the galaxy luminosity function (LF) to calculate two types of radial number densities statistics of the galaxy distribution as discussed in Ribeiro (2005), namely the differential density $\\gamma$ and the integral differential density $\\gamma^\\ast$. By applying the theory advanced by Ribeiro and Stoeger (2003), which connects the relativistic cosmology number counts with the astronomically derived LF, the differential number counts $dN/dz$ are extracted from the LF and used to calculate both $\\gamma$ and $\\gamma^\\ast$ with various cosmological distance definitions, namely the area distance, luminosity distance, galaxy area distance and redshift distance. LF data are taken from the CNOC2 galaxy redshift survey and $\\gamma$ and $\\gamma^\\ast$ are calculated for two cosmological models: Einstein-de Sitter and an $\\Omega_{m_0}=0.3$, $\\Omega_{\\Lambda_0}=0.7$ standard cosmology. The results confirm the strong dependency of both statistics on the distance definition, as predicted in...
Phase-Space Explorations in Time-Dependent Density Functional Theory
Rajam, Arun K.; Hessler, Paul; Gaun, Christian; Maitra, Neepa T.
2009-01-01
We discuss two problems which are particularly challenging for approximations in time-dependent density functional theory (TDDFT) to capture: momentum-distributions in ionization processes, and memory-dependence in real-time dynamics. We propose an extension of TDDFT to phase-space densities, discuss some formal aspects of such a "phase-space density functional theory" and explain why it could ameliorate the problems in both cases. For each problem, a two-electron model system is exactly nume...
Model comparison for the density structure along solar prominence threads
Arregui, I.; Soler, R.
2015-06-01
Context. Quiescent solar prominence fine structures are typically modelled as density enhancements, called threads, which occupy a fraction of a longer magnetic flux tube. This is justified from the spatial distribution of the imaged plasma emission or absorption of prominences at small spatial scales. The profile of the mass density along the magnetic field is unknown, however, and several arbitrary alternatives are employed in prominence wave studies. The identification and measurement of period ratios from multiple harmonics in standing transverse thread oscillations offer a remote diagnostics method to probe the density variation of these structures. Aims: We present a comparison of theoretical models for the field-aligned density along prominence fine structures. They aim to imitate density distributions in which the plasma is more or less concentrated around the centre of the magnetic flux tube. We consider Lorentzian, Gaussian, and parabolic profiles. We compare theoretical predictions based on these profiles for the period ratio between the fundamental transverse kink mode and the first overtone to obtain estimates for the density ratios between the central part of the tube and its foot-points and to assess which one would better explain observed period ratio data. Methods: Bayesian parameter inference and model comparison techniques were developed and applied. To infer the parameters, we computed the posterior distribution for the density gradient parameter that depends on the observable period ratio. The model comparison involved computing the marginal likelihood as a function of the period ratio to obtain the plausibility of each density model as a function of the observable. We also computed the Bayes factors to quantify the relative evidence for each model, given a period ratio observation. Results: A Lorentzian density profile, with plasma density concentrated around the centre of the tube, seems to offer the most plausible inversion result. A
Hilbert Space of Probability Density Functions Based on Aitchison Geometry
J. J. EGOZCUE; J. L. D(I)AZ-BARRERO; V. PAWLOWSKY-GLAHN
2006-01-01
The set of probability functions is a convex subset of L1 and it does not have a linear space structure when using ordinary sum and multiplication by real constants. Moreover, difficulties arise when dealing with distances between densities. The crucial point is that usual distances are not invariant under relevant transformations of densities. To overcome these limitations, Aitchison's ideas on compositional data analysis are used, generalizing perturbation and power transformation, as well as the Aitchison inner product, to operations on probability density functions with support on a finite interval. With these operations at hand, it is shown that the set of bounded probability density functions on finite intervals is a pre-Hilbert space. A Hilbert space of densities, whose logarithm is square-integrable, is obtained as the natural completion of the pre-Hilbert space.
A molecular density functional theory to study solvation in water
Jeanmairet, Guillaume
2014-01-01
A classical density functional theory is applied to study solvation of solutes in water. An approx- imate form of the excess functional is proposed for water. This functional requires the knowledge of pure solvent direct correlation functions. Those functions can be computed by using molecular simulations such as molecular dynamic or Monte Carlo. It is also possible to use functions that have been determined experimentally. The functional minimization gives access to the solvation free energy and to the equilibrium solvent density. Some correction to the functional are also proposed to get the proper tetrahedral order of solvent molecules around a charged solute and to reproduce the correct long range hydrophobic behavior of big apolar solutes. To proceed the numerical minimization of the functional, the theory has been discretized on two tridimensional grids, one for the space coordinates, the other for the angular coordinates, in a functional minimization code written in modern Fortran, mdft. This program i...
Evaluation of mobile dislocation density based on distribution function of dislocation segments
周志敏; 孙艳蕊; 周海涛
2004-01-01
A function is offered to represent the distribution of reduced length of dislocation segments. The segment distribution of materials, e. g. , MgO and Cu, can be well described by taking appropriate values of parametersm and n. Based on this function, a model for evaluating the mobile dislocation density is developed. Provided the total dislocation density and applied stress are known, the mobile dislocation density could be readily assessed by using this model. For pure copper the mobile dislocation density and strain rates at deferent strains are evaluated. The calculated results are consistent with the known experimental data.
Energy Density Functional for Nuclei and Neutron Stars
Erler, J. [UTK/ORNL/German Cancer Research Center-Heidelberg; Horowitz, C. J. [UTK/ORNL/Indiana University; Nazarewicz, Witold [UTK/ORNL/University of Warsaw; Rafalski, M. [UTK/ORNL; Reinhard, P.-G. [Universitat Erlangen, Germany
2013-01-01
Background: Recent observational data on neutron star masses and radii provide stringent constraints on the equation of state of neutron rich matter [ Annu. Rev. Nucl. Part. Sci. 62 485 (2012)]. Purpose: We aim to develop a nuclear energy density functional that can be simultaneously applied to finite nuclei and neutron stars. Methods: We use the self-consistent nuclear density functional theory (DFT) with Skyrme energy density functionals and covariance analysis to assess correlations between observables for finite nuclei and neutron stars. In a first step two energy functionals a high density energy functional giving reasonable neutron properties, and a low density functional fitted to nuclear properties are matched. In a second step, we optimize a new functional using exactly the same protocol as in earlier studies pertaining to nuclei but now including neutron star data. This allows direct comparisons of performance of the new functional relative to the standard one. Results: The new functional TOV-min yields results for nuclear bulk properties (energy, rms radius, diffraction radius, and surface thickness) that are of the same quality as those obtained with the established Skyrme functionals, including SV-min. When comparing SV-min and TOV-min, isoscalar nuclear matter indicators vary slightly while isovector properties are changed considerably. We discuss neutron skins, dipole polarizability, separation energies of the heaviest elements, and proton and neutron drip lines. We confirm a correlation between the neutron skin of 208Pb and the neutron star radius. Conclusions: We demonstrate that standard energy density functionals optimized to nuclear data do not carry information on the expected maximum neutron star mass, and that predictions can only be made within an extremely broad uncertainty band. For atomic nuclei, the new functional TOV-min performs at least as well as the standard nuclear functionals, but it also reproduces expected neutron star data
Ulian, Gianfranco; Valdrè, Giovanni, E-mail: giovanni.valdre@unibo.it [Dipartimento di Scienze Biologiche e Geologico-Ambientali, Centro di Ricerca Interdisciplinare di Biomineralogia, Cristallografia e Biomateriali, Università di Bologna “Alma Mater Studiorum” Piazza di Porta San Donato 1, 40126 Bologna (Italy); Tosoni, Sergio [Departament de Química Física and Institut de Química Teòrica i Computacional (IQTCUB), Universitat de Barcelona, C/ Martí i Franquès 1, E-08028 Barcelona (Spain)
2013-11-28
The quantum chemical characterization of solid state systems is conducted with many different approaches, among which the adoption of periodic boundary conditions to deal with three-dimensional infinite condensed systems. This method, coupled to the Density Functional Theory (DFT), has been proved successful in simulating a huge variety of solids. Only in relatively recent years this ab initio quantum-mechanic approach has been used for the investigation of layer silicate structures and minerals. In the present work, a systematic comparison of different DFT functionals (GGA-PBEsol and hybrid B3LYP) and basis sets (plane waves and all-electron Gaussian-type orbitals) on the geometry, energy, and phonon properties of a model layer silicate, talc [Mg{sub 3}Si{sub 4}O{sub 10}(OH){sub 2}], is presented. Long range dispersion is taken into account by DFT+D method. Results are in agreement with experimental data reported in literature, with minimal deviation given by the GTO/B3LYP-D* method regarding both axial lattice parameters and interaction energy and by PW/PBE-D for the unit-cell volume and angular values. All the considered methods adequately describe the experimental talc infrared spectrum.
Matter density perturbation and power spectrum in running vacuum model
Geng, Chao-Qiang
2016-01-01
We investigate the matter density perturbation $\\delta_m$ and power spectrum $P(k)$ in the running vacuum model (RVM) with the cosmological constant being a function of the Hubble parameter, given by $\\Lambda = \\Lambda_0 + 6 \\sigma H H_0+ 3\
Charge and spin fluctuations in the density functional theory
Gyoerffy, B.L.; Barbieri, A. (Bristol Univ. (UK). H.H. Wills Physics Lab.); Staunton, J.B. (Warwick Univ., Coventry (UK). Dept. of Physics); Shelton, W.A.; Stocks, G.M. (Oak Ridge National Lab., TN (USA))
1990-01-01
We introduce a conceptual framework which allow us to treat charge and spin fluctuations about the Local density Approximation (LDA) to the Density Functional Theory (DFT). We illustrate the approach by explicit study of the Disordered Local Moment (DLM) state in Fe above the Curie Temperature {Tc} and the Mott insulating state in MnO. 27 refs., 6 figs.
Excitation Spectra of Nucleobases with Multiconfigurational Density Functional Theory
Hubert, Mickaël; Jensen, Hans Jørgen Aa; Hedegård, Erik D.
2016-01-01
Range-separated hybrid methods between wave function theory and density functional theory (DFT) can provide high-accuracy results, while correcting some of the inherent flaws of both the underlying wave function theory and DFT. We here assess the accuracy for excitation energies of the nucleobases...
Applications and validations of the Minnesota density functionals
Zhao, Yan; Truhlar, Donald G.
2011-01-01
We discuss and review selected recent applications and validations of the Minnesota density functionals, especially the M06 family, emphasizing nanochemistry, organic, inorganic, and biological chemistry, and catalysis and highlighting the broad accuracy of these functionals as compared to previous popular functionals for thermochemistry, kinetics, and noncovalent interactions.
The Z3 model with the density of states method
Mercado, Ydalia Delgado; Gattringer, Christof
2014-01-01
In this contribution we apply a new variant of the density of states method to the Z3 spin model at finite density. We use restricted expectation values evaluated with Monte Carlo simulations and study their dependence on a control parameter lambda. We show that a sequence of one-parameter fits to the Monte-Carlo data as a function of lambda is sufficient to completely determine the density of states. We expect that this method has smaller statistical errors than other approaches since all generated Monte Carlo data are used in the determination of the density. We compare results for magnetization and susceptibility to a reference simulation in the dual representation of the Z3 spin model and find good agreement for a wide range of parameters.
Gutzwiller study of extended Hubbard models with fixed boson densities
Kimura, Takashi [Department of Information Sciences, Kanagawa University, 2946 Tsuchiya, Hiratsuka, Kanagawa 259-1293 (Japan)
2011-12-15
We studied all possible ground states, including supersolid (SS) phases and phase separations of hard-core- and soft-core-extended Bose-Hubbard models with fixed boson densities by using the Gutzwiller variational wave function and the linear programming method. We found that the phase diagram of the soft-core model depends strongly on its transfer integral. Furthermore, for a large transfer integral, we showed that an SS phase can be the ground state even below or at half filling against the phase separation. We also found that the density difference between nearest-neighbor sites, which indicates the density order of the SS phase, depends strongly on the boson density and transfer integral.
Density Functional Calculations for the Neutron Star Matter at Subnormal Density
Kashiwaba, Yu; Nakatsukasa, Takashi
The pasta phases of nuclear matter, whose existence is suggested at low density, may influence observable properties of neutron stars. In order to investigate properties of the neutron star matter, we calculate self-consistent solutions for the ground states of slab-like phase using the microscopic density functional theory with Bloch wave functions. The calculations are performed at each point of fixed average density and proton fraction (\\bar{ρ },Yp), varying the lattice constant of the unit cell. For small Yp values, the dripped neutrons emerge in the ground state, while the protons constitute the slab (crystallized) structure. The shell effect of protons affects the thickness of the slab nuclei.
Reflection-asymmetric nuclear deformations within the Density Functional Theory
Olsen, E; Nazarewicz, W; Stoitsov, M; 10.1088/1742-6596/402/1/012034
2013-01-01
Within the nuclear density functional theory (DFT) we study the effect of reflection-asymmetric shapes on ground-state binding energies and binding energy differences. To this end, we developed the new DFT solver AxialHFB that uses an approximate second-order gradient to solve the Hartree-Fock-Bogoliubov equations of superconducting DFT with the quasi-local Skyrme energy density functionals. Illustrative calculations are carried out for even-even isotopes of radium and thorium.
Density Functional Theory with Dissipation: Transport through Single Molecules
Kieron Burke
2012-04-30
A huge amount of fundamental research was performed on this grant. Most of it focussed on fundamental issues of electronic structure calculations of transport through single molecules, using density functional theory. Achievements were: (1) First density functional theory with dissipation; (2) Pseudopotential plane wave calculations with master equation; (3) Weak bias limit; (4) Long-chain conductance; and (5) Self-interaction effects in tunneling.
Sun, Haitao
2016-05-16
We propose a new methodology for the first-principles description of the electronic properties relevant for charge transport in organic molecular crystals. This methodology, which is based on the combination of a non-empirical, optimally tuned range-separated hybrid functional with the polarizable continuum model, is applied to a series of eight representative molecular semiconductor crystals. We show that it provides ionization energies, electron affinities, and transport gaps in very good agreement with experimental values as well as with the results of many-body perturbation theory within the GW approximation at a fraction of the computational costs. Hence, this approach represents an easily applicable and computationally efficient tool to estimate the gas-to-crystal-phase shifts of the frontier-orbital quasiparticle energies in organic electronic materials.
Impact of ATLAS Data on Parton Density Functions
Newman, PR; The ATLAS collaboration
2014-01-01
Various measurements provided by the ATLAS collaboration have significant impact on parton density functions. The production of W and Z bosons inclusively or in association with charm-quark have are found to constraint the strange-quark density at medium and low Bjorken-x. Multi-Jet and photon production processes show impact on the gluon density. Off-resonance Drell Yan production at large lepton pair masses may be used to constrain anti-quark density at high x. A qualitative comparison of the ATLAS measurements to predictions based on different PDFs is presented.
Basis convergence of range-separated density-functional theory
Franck, Odile; Luppi, Eleonora; Toulouse, Julien
2014-01-01
Range-separated density-functional theory is an alternative approach to Kohn-Sham density-functional theory. The strategy of range-separated density-functional theory consists in separating the Coulomb electron-electron interaction into long-range and short-range components, and treating the long-range part by an explicit many-body wave-function method and the short-range part by a density-functional approximation. Among the advantages of using many-body methods for the long-range part of the electron-electron interaction is that they are much less sensitive to the one-electron atomic basis compared to the case of the standard Coulomb interaction. Here, we provide a detailed study of the basis convergence of range-separated density-functional theory. We study the convergence of the partial-wave expansion of the long-range wave function near the electron-electron coalescence. We show that the rate of convergence is exponential with respect to the maximal angular momentum L for the long-range wave function, whe...
Density functional theory for polymeric systems in 2D.
Słyk, Edyta; Roth, Roland; Bryk, Paweł
2016-06-22
We propose density functional theory for polymeric fluids in two dimensions. The approach is based on Wertheim's first order thermodynamic perturbation theory (TPT) and closely follows density functional theory for polymers proposed by Yu and Wu (2002 J. Chem. Phys. 117 2368). As a simple application we evaluate the density profiles of tangent hard-disk polymers at hard walls. The theoretical predictions are compared against the results of the Monte Carlo simulations. We find that for short chain lengths the theoretical density profiles are in an excellent agreement with the Monte Carlo data. The agreement is less satisfactory for longer chains. The performance of the theory can be improved by recasting the approach using the self-consistent field theory formalism. When the self-avoiding chain statistics is used, the theory yields a marked improvement in the low density limit. Further improvements for long chains could be reached by going beyond the first order of TPT.
Birke, Ronald L; Znamenskiy, Vasiliy; Lombardi, John R
2010-06-07
Vibrational frequency calculations were made for a Ag(10)-pyridine vertex complex with density functional theory (DFT) for static simulated spectra and with time-dependent DFT (TD-DFT) for preresonance and resonance simulated spectra using both B3LYP/LANL2DZ and BP86/TZP methodologies. In addition, 40 excited states of the complex were calculated and assigned symmetry based on a C(2v) symmetry of the optimized complex found with B3LYP/LANL2DZ. Molecular orbital isosurfaces show that the excited states involve both Ag(10) intercluster excitations and charge-transfer (CT) excitations between the Ag nanocluster and the pyridine molecule. An excitation around 500 nm involving CT from the Ag cluster to pyridine was found in both calculations. For free pyridine, the relative average deviations between unscaled calculated and experimental results were 1.5 cm(-1) for BP86 and 3.1 cm(-1) for the B3LYP calculations. For the complex, simulated spectra at a variety of excitation wavelengths were calculated. In the case of 514 nm excitation, the simulated Raman cross section from the TD-DFT calculations (near the CT resonance) was plotted versus Raman shift frequency and compared with an experimental surface enhanced Raman scattering (SERS) spectrum obtained on an oxidation-reduction cycle, ORC roughened Ag electrode. The BP86 TD-DFT calculation with finite damping term showed a better fit to experimental spectrum with respect to both relative intensities and frequencies. The average deviation of the unscaled BP86 calculations for 16 bands in the experimental spectrum was 13.0 cm(-1). The calculated spectrum in both cases shows many contributions from nontotally symmetric as well as totally symmetric modes, indicating the contribution of Herzberg-Teller (HT) scattering. The simulated intensities of the Raman modes of different symmetry from Ag(10)-pyridine can be correlated with HT intensity borrowing from excited states of given symmetry and decent oscillator strength. These
Pairing Nambu-Goldstone modes within nuclear density functional theory
Hinohara, Nobuo
2016-01-01
We show that the Nambu-Goldstone formalism of the broken gauge symmetry in the presence of the $T=1$ pairing condensate offers a quantitative description of the binding energy differences of open-shell superfluid nuclei. We conclude that the pairing rotational moments of inertia are excellent pairing indicators, which are free from ambiguities attributed to odd-mass systems. We offer a new, unified interpretation of the binding-energy differences traditionally viewed in the shell model picture as signatures of the valence nucleon properties. We present the first systematic analysis of the off-diagonal pairing rotational moments of inertia, and demonstrate the mixing of the neutron and proton pairing rotational modes in the ground states of even-even nuclei. Finally, we discuss the importance of mass measurements of neutron-rich nuclei for constraining the pairing energy density functional.
Periodic Density Functional Theory Solver using Multiresolution Analysis with MADNESS
Harrison, Robert; Thornton, William
2011-03-01
We describe the first implementation of the all-electron Kohn-Sham density functional periodic solver (DFT) using multi-wavelets and fast integral equations using MADNESS (multiresolution adaptive numerical environment for scientific simulation; http://code.google.com/p/m-a-d-n-e-s-s). The multiresolution nature of a multi-wavelet basis allows for fast computation with guaranteed precision. By reformulating the Kohn-Sham eigenvalue equation into the Lippmann-Schwinger equation, we can avoid using the derivative operator which allows better control of overall precision for the all-electron problem. Other highlights include the development of periodic integral operators with low-rank separation, an adaptable model potential for nuclear potential, and an implementation for Hartree Fock exchange. This work was supported by NSF project OCI-0904972 and made use of resources at the Center for Computational Sciences at Oak Ridge National Laboratory under contract DE-AC05-00OR22725.
Density Functional Theory using Multiresolution Analysis with MADNESS
Thornton, Scott; Harrison, Robert
2012-02-01
We describe the first implementation of the all-electron Kohn-Sham density functional periodic solver (DFT) using multi-wavelets and fast integral equations using MADNESS (multiresolution adaptive numerical environment for scientific simulation; http://code.google.com/p/m-a-d-n-e-s-s). The multiresolution nature of a multi-wavelet basis allows for fast computation with guaranteed precision. By reformulating the Kohn-Sham eigenvalue equation into the Lippmann-Schwinger equation, we can avoid using the derivative operator which allows better control of overall precision for the all-electron problem. Other highlights include the development of periodic integral operators with low-rank separation, an adaptable model potential for the nuclear potential, and an implementation for Hartree-Fock exchange.
Dipole polarizability of 120Sn and nuclear energy density functionals
Hashimoto, T; Reinhard, P -G; Tamii, A; von Neumann-Cosel, P; Adachi, T; Aoi, N; Bertulani, C A; Fujita, H; Fujita, Y; Ganioǧlu, E; Hatanaka, K; Iwamoto, C; Kawabata, T; Khai, N T; Krugmann, A; Martin, D; Matsubara, H; Miki, K; Neveling, R; Okamura, H; Ong, H J; Poltoratska, I; Ponomarev, V Yu; Richter, A; Sakaguchi, H; Shimbara, Y; Shimizu, Y; Simonis, J; Smit, F D; Süsoy, G; Thies, J H; Suzuki, T; Yosoi, M; Zenihiro, J
2015-01-01
The electric dipole strength distribution in 120Sn between 5 and 22 MeV has been determined at RCNP Osaka from a polarization transfer analysis of proton inelastic scattering at E_0 = 295 MeV and forward angles including 0{\\deg}. Combined with photoabsorption data an electric dipole polarizability alpha_D(120Sn) = 8.93(36) fm^3 is extracted. The correlation of this value with alpha_D for 208Pb serves as a test of energy density functionals (EDFs). The majority of models based on Skyrme interactions can describe the data while relativistic approaches fail. The accuracy of the experimental results provides important constraints on the static isovector properties of EDFs used to predict symmetry energy parameters and the neutron skin thickness of nuclei.
Linear response of homogeneous nuclear matter with energy density functionals
Pastore, A. [Institut d’Astronomie et d’Astrophysique, CP 226, Université Libre de Bruxelles, B-1050 Bruxelles (Belgium); Davesne, D., E-mail: davesne@ipnl.in2p3.fr [Institut de Physique Nucléaire de Lyon, CNRS-IN2P3, UMR 5822, Université Lyon 1, F-69622 Villeurbanne (France); Navarro, J. [IFIC (CSIC University of Valencia), Apdo. Postal 22085, E-46071 Valencia (Spain)
2015-03-01
Response functions of infinite nuclear matter with arbitrary isospin asymmetry are studied in the framework of the random phase approximation. The residual interaction is derived from a general nuclear Skyrme energy density functional. Besides the usual central, spin–orbit and tensor terms it could also include other components as new density-dependent terms or three-body terms. Algebraic expressions for the response functions are obtained from the Bethe–Salpeter equation for the particle–hole propagator. Applications to symmetric nuclear matter, pure neutron matter and asymmetric nuclear matter are presented and discussed. Spin–isospin strength functions are analyzed for varying conditions of density, momentum transfer, isospin asymmetry, and temperature for some representative Skyrme functionals. Particular attention is paid to the discussion of instabilities, either real or unphysical, which could manifest in finite nuclei.
Inclusion of Dispersion Effects in Density Functional Theory
Møgelhøj, Andreas
In this thesis, applications and development will be presented within the field of van der Waals interactions in density functional theory. The thesis is based on the three projects: i) van der Waals interactions effect on the structure of liquid water at ambient conditions, ii) development...... and benchmarking of a new van der Waals density functional, and iii) the application of the newly developed functional to CO desorption from Ru(0001). The effect of van der Waals interactions in water was studied by performing ab initio molecular dynamics simulations using PBE and the two recent van der Waals...... density functionals optPBE-vdW and vdW-DF2 with identical computational setup. The two van der Waals functionals have been found to give excellent descriptions of the constituents of water (e.g., water dimers and hexamers). Including van der Waals interactions gives a softer water structure as seen from...
Introduction to Classical Density Functional Theory by Computational Experiment
Jeanmairet, Guillaume; Levesque, Maximilien; Borgis, Daniel
2014-01-01
We present here an introductory practical course to classical density functional theory (cDFT). Density functional theories, whether quantum or classical, rely largely on nonintuitive abstract concepts and applied mathematics. They are nevertheless a powerful tool and an active field of research in physics and chemistry that led to the 1998 Nobel prize in chemistry. We here illustrate the DFT in its most mathematically simple and yet physically relevant form: the classical density functional theory of an ideal fluid in an external field, as applied to the prediction of the structure of liquid neon at the molecular scale. This introductory course is built around the production of a cDFT code written by students using the Mathematica language. In this way, they are brought to deal with (i) the cDFT theory itself, (ii) some basic concepts around the statistical mechanics of simple fluids, (iii) the underlying mathematical and numerical problem of functional minimization, and (iv) a functional programming languag...
Fromager, Emmanuel
2014-01-01
The exact formulation of multi-configuration density-functional theory (DFT) is discussed in this work. As an alternative to range-separated methods, where electron correlation effects are split in the coordinate space, the combination of Configuration Interaction methods with orbital occupation functionals is explored at the formal level through the separation of correlation effects in the orbital space. When applied to model Hamiltonians, this approach leads to an exact Site-Occupation Embedding Theory (SOET). An adiabatic connection expression is derived for the complementary bath functional and a comparison with Density Matrix Embedding Theory (DMET) is made. Illustrative results are given for the simple two-site Hubbard model. SOET is then applied to a quantum chemical Hamiltonian, thus leading to an exact Complete Active Space Site-Occupation Functional Theory (CASSOFT) where active electrons are correlated explicitly within the CAS and the remaining contributions to the correlation energy are described...
The Role of the Basis Set: Assessing Density Functional Theory
Boese, A D; Handy, N C; Martin, Jan M. L.; Handy, Nicholas C.
2003-01-01
When developing and assessing density functional theory methods, a finite basis set is usually employed. In most cases, however, the issue of basis set dependency is neglected. Here, we assess several basis sets and functionals. In addition, the dependency of the semiempirical fits to a given basis set for a generalised gradient approximation and a hybrid functional is investigated. The resulting functionals are then tested for other basis sets, evaluating their errors and transferability.
Nucleation for Lennard-Jones Fluid by Density Functional Theory
FU Dong
2005-01-01
@@ A non-mean field density functional theory is employed to investigate the vapour-liquid nucleation. The excess Helmholtz free energy functional is formulated in terms of a local density approximation for short ranged repulsion and a density-gradient expansion for long-ranged attractions. An analytical expression for the direct correlation function of a Lennard-Jones fluid is utilized to take into account the effect of long-ranged attractions on intermolecular correlations. With the predicted bulk properties and surface tension as input, the nucleation properties including density profile, work of formation and number of particles at the reduced temperatures T* = 0.694 and 0.741 are inuestigated. The obtained number of particles in the critical nucleus agrees well with the simulation data.
Universal iso-density polarizable continuum model for molecular solvents
Gunceler, Deniz
2014-01-01
Implicit electron-density solvation models based on joint density-functional theory offer a computationally efficient solution to the problem of calculating thermodynamic quantities of solvated systems from first-principles quantum mechanics. However, despite much recent interest in such models, to date the applicability of such models to non-aqueous solvents has been limited because the determination of the model parameters requires fitting to a large database of experimental solvation energies for each new solvent considered. This work presents an alternate approach which allows development of new solvation models for a large class of protic and aprotic solvents from only simple, single-molecule ab initio calculations and readily available bulk thermodynamic data. We find that this model is accurate to nearly 1.7 kcal/mol even for solvents outside our development set.
Applications of density functional theory in materials science and engineering
Alvarado, Manuel, Jr.
Density Functional Theory (DFT) is a powerful tool that can be used to model various systems in materials science. Our research applies DFT to two problems of interest. First, an organic/inorganic complex dye system known as a Mayan pigment is modeled to determine chemical binding sites, verifying each model with physical data such as UV/Vis spectra. Preliminary studies on palygorskite-based mayan pigments (mayacrom blue, mayacrom purple) show excellent agreement with experimental studies when using a dimer dye geometry binding with tetrahedrally-coordinated aluminum impurity sites in palygorksite. This approach is applied to a sepiolite-based organic/inorganic dye system using thioindigo attached to a tetrahedral aluminum impurity site with an additional aluminum impurity site in close proximity to the binding site. As a second application of DFT, various grain orientations in beta-Sn are modeled under imposed strains in order to calculate elastic properties of this system. These calculations are intended to clarify discrepancies in published, experimental crystal compliance values.
Assessment of density functional methods with correct asymptotic behavior
Tsai, Chen-Wei; Li, Guan-De; Chai, Jeng-Da
2012-01-01
Long-range corrected (LC) hybrid functionals and asymptotically corrected (AC) model potentials are two distinct density functional methods with correct asymptotic behavior. They are known to be accurate for properties that are sensitive to the asymptote of the exchange-correlation potential, such as the highest occupied molecular orbital energies and Rydberg excitation energies of molecules. To provide a comprehensive comparison, we investigate the performance of the two schemes and others on a very wide range of applications, including the asymptote problems, self-interaction-error problems, energy-gap problems, charge-transfer problems, and many others. The LC hybrid scheme is shown to consistently outperform the AC model potential scheme. In addition, to be consistent with the molecules collected in the IP131 database [Y.-S. Lin, C.-W. Tsai, G.-D. Li, and J.-D. Chai, J. Chem. Phys. 136, 154109 (2012)], we expand the EA115 and FG115 databases to include, respectively, the vertical electron affinities and f...
Specification of Density Functional Approximation by Radial Distribution Function of Bulk Fluid
ZHOUShi－Qi
2002-01-01
A systematic methodology is proposed to deal with the weighted density approximation version of classical density functional theory by employing the knowledge of radial distribution function of bulk fluid.The present methodology results from the concept of universality of the free energy density functional combined with the test particle method.It is shown that the new method is very accurate for the predictions of density distribution of a hard sphere fluid at different confining geometries.The physical foundation of the present methodology is also applied to the quantum density functional theory.
Teaching Chemistry with Electron Density Models
Shusterman, Gwendolyn P.; Shusterman, Alan J.
1997-07-01
Linus Pauling once said that a topic must satisfy two criteria before it can be taught to students. First, students must be able to assimilate the topic within a reasonable amount of time. Second, the topic must be relevant to the educational needs and interests of the students. Unfortunately, the standard general chemistry textbook presentation of "electronic structure theory", set as it is in the language of molecular orbitals, has a difficult time satisfying either criterion. Many of the quantum mechanical aspects of molecular orbitals are too difficult for most beginning students to appreciate, much less master, and the few applications that are presented in the typical textbook are too limited in scope to excite much student interest. This article describes a powerful new method for teaching students about electronic structure and its relevance to chemical phenomena. This method, which we have developed and used for several years in general chemistry (G.P.S.) and organic chemistry (A.J.S.) courses, relies on computer-generated three-dimensional models of electron density distributions, and largely satisfies Pauling's two criteria. Students find electron density models easy to understand and use, and because these models are easily applied to a broad range of topics, they successfully convey to students the importance of electronic structure. In addition, when students finally learn about orbital concepts they are better prepared because they already have a well-developed three-dimensional picture of electronic structure to fall back on. We note in this regard that the types of models we use have found widespread, rigorous application in chemical research (1, 2), so students who understand and use electron density models do not need to "unlearn" anything before progressing to more advanced theories.
Building A Universal Nuclear Energy Density Functional (UNEDF)
Carlson, Joe [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Furnstahl, Dick [The Ohio State Univ., Columbus, OH (United States); Horoi, Mihai [Central Michigan Univ., Mount Pleasant, MI (United States); Lusk, Rusty [Argonne National Lab. (ANL), Argonne, IL (United States); Nazarewicz, Witek [Univ. of Tennessee, Knoxville, TN (United States); Ng, Esmond [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Thompson, Ian [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Vary, James [Iowa State Univ., Ames, IA (United States)
2012-09-30
During the period of Dec. 1 2006 - Jun. 30, 2012, the UNEDF collaboration carried out a comprehensive study of all nuclei, based on the most accurate knowledge of the strong nuclear interaction, the most reliable theoretical approaches, the most advanced algorithms, and extensive computational resources, with a view towards scaling to the petaflop platforms and beyond. The long-term vision initiated with UNEDF is to arrive at a comprehensive, quantitative, and unified description of nuclei and their reactions, grounded in the fundamental interactions between the constituent nucleons. We seek to replace current phenomenological models of nuclear structure and reactions with a well-founded microscopic theory that delivers maximum predictive power with well-quantified uncertainties. Specifically, the mission of this project has been three-fold: first, to find an optimal energy density functional (EDF) using all our knowledge of the nucleonic Hamiltonian and basic nuclear properties; second, to apply the EDF theory and its extensions to validate the functional using all the available relevant nuclear structure and reaction data; third, to apply the validated theory to properties of interest that cannot be measured, in particular the properties needed for reaction theory. The main physics areas of UNEDF, defined at the beginning of the project, were: ab initio structure; ab initio functionals; DFT applications; DFT extensions; reactions.
Insights into phase transitions and entanglement from density functional theory
Wei, Bo-Bo
2016-11-01
Density functional theory (DFT) has met great success in solid state physics, quantum chemistry and in computational material sciences. In this work we show that DFT could shed light on phase transitions and entanglement at finite temperatures. Specifically, we show that the equilibrium state of an interacting quantum many-body system which is in thermal equilibrium with a heat bath at a fixed temperature is a universal functional of the first derivatives of the free energy with respect to temperature and other control parameters respectively. This insight from DFT enables us to express the average value of any physical observable and any entanglement measure as a universal functional of the first derivatives of the free energy with respect to temperature and other control parameters. Since phase transitions are marked by the nonanalytic behavior of free energy with respect to control parameters, the physical quantities and entanglement measures may present nonanalytic behavior at critical point inherited from their dependence on the first derivative of free energy. We use two solvable models to demonstrate these ideas. These results give new insights for phase transitions and provide new profound connections between entanglement and phase transitions in interacting quantum many-body physics.
Basis convergence of range-separated density-functional theory.
Franck, Odile; Mussard, Bastien; Luppi, Eleonora; Toulouse, Julien
2015-02-21
Range-separated density-functional theory (DFT) is an alternative approach to Kohn-Sham density-functional theory. The strategy of range-separated density-functional theory consists in separating the Coulomb electron-electron interaction into long-range and short-range components and treating the long-range part by an explicit many-body wave-function method and the short-range part by a density-functional approximation. Among the advantages of using many-body methods for the long-range part of the electron-electron interaction is that they are much less sensitive to the one-electron atomic basis compared to the case of the standard Coulomb interaction. Here, we provide a detailed study of the basis convergence of range-separated density-functional theory. We study the convergence of the partial-wave expansion of the long-range wave function near the electron-electron coalescence. We show that the rate of convergence is exponential with respect to the maximal angular momentum L for the long-range wave function, whereas it is polynomial for the case of the Coulomb interaction. We also study the convergence of the long-range second-order Møller-Plesset correlation energy of four systems (He, Ne, N2, and H2O) with cardinal number X of the Dunning basis sets cc - p(C)V XZ and find that the error in the correlation energy is best fitted by an exponential in X. This leads us to propose a three-point complete-basis-set extrapolation scheme for range-separated density-functional theory based on an exponential formula.
Guo, Sheng; Watson, Mark A; Hu, Weifeng; Sun, Qiming; Chan, Garnet Kin-Lic
2016-04-12
The strongly contracted variant of second-order N-electron valence state perturbation theory (NEVPT2) is an efficient perturbative method to treat dynamic correlation without the problems of intruder states or level shifts, while the density matrix renormalization group (DMRG) provides the capability to address static correlation in large active spaces. We present a combination of the DMRG and strongly contracted NEVPT2 (DMRG-SC-NEVPT2) that uses an efficient algorithm to compute high-order reduced-density matrices from DMRG wave functions. The capabilities of DMRG-SC-NEVPT2 are demonstrated on calculations of the chromium dimer potential energy curve at the basis set limit, and the excitation energies of a trimer model of poly(p-phenylenevinylene) (PPV(n = 3)).
Higher-accuracy van der Waals density functional
Lee, Kyuho; Murray, Éamonn D.; Kong, Lingzhu
2010-01-01
We propose a second version of the van der Waals density functional of Dion et al. [Phys. Rev. Lett. 92, 246401 (2004)], employing a more accurate semilocal exchange functional and the use of a large-N asymptote gradient correction in determining the vdW kernel. The predicted binding energy...
Wigner Function of Density Operator for Negative Binomial Distribution
HE Min-Hua; XU Xing-Lei; ZHANG Duan-Ming; LI Hong-Qi; PAN Gui-Jun; YIN Yan-Ping; CHEN Zhi-Yuan
2008-01-01
By using the technique of integration within an ordered product (IWOP) of operator we derive Wigner function of density operator for negative binomial distribution of radiation field in the mixed state case, then we derive the Wigner function of squeezed number state, which yields negative binomial distribution by virtue of the entangled state representation and the entangled Wigner operator.
Density-functional perturbation theory goes time-dependent
Gebauer, Ralph; Rocca, Dario; Baroni, Stefano
2009-01-01
The scope of time-dependent density-functional theory (TDDFT) is limited to the lowest portion of the spectrum of rather small systems (a few tens of atoms at most). In the static regime, density-functional perturbation theory (DFPT) allows one to calculate response functions of systems as large as currently dealt with in ground-state simulations. In this paper we present an effective way of combining DFPT with TDDFT. The dynamical polarizability is first expressed as an off-diagonal matrix e...
Density functional for ternary non-additive hard sphere mixtures.
Schmidt, Matthias
2011-10-19
Based on fundamental measure theory, a Helmholtz free energy density functional for three-component mixtures of hard spheres with general, non-additive interaction distances is constructed. The functional constitutes a generalization of the previously given theory for binary non-additive mixtures. The diagrammatic structure of the spatial integrals in both functionals is of star-like (or tree-like) topology. The ternary diagrams possess a higher degree of complexity than the binary diagrams. Results for partial pair correlation functions, obtained via the Ornstein-Zernike route from the second functional derivatives of the excess free energy functional, agree well with Monte Carlo simulation data. © 2011 IOP Publishing Ltd
Density functional theory based generalized effective fragment potential method
Nguyen, Kiet A., E-mail: kiet.nguyen@wpafb.af.mil, E-mail: ruth.pachter@wpafb.af.mil [Air Force Research Laboratory, Wright-Patterson Air Force Base, Ohio 45433 (United States); UES, Inc., Dayton, Ohio 45432 (United States); Pachter, Ruth, E-mail: kiet.nguyen@wpafb.af.mil, E-mail: ruth.pachter@wpafb.af.mil [Air Force Research Laboratory, Wright-Patterson Air Force Base, Ohio 45433 (United States); Day, Paul N. [Air Force Research Laboratory, Wright-Patterson Air Force Base, Ohio 45433 (United States); General Dynamics Information Technology, Inc., Dayton, Ohio 45431 (United States)
2014-06-28
We present a generalized Kohn-Sham (KS) density functional theory (DFT) based effective fragment potential (EFP2-DFT) method for the treatment of solvent effects. Similar to the original Hartree-Fock (HF) based potential with fitted parameters for water (EFP1) and the generalized HF based potential (EFP2-HF), EFP2-DFT includes electrostatic, exchange-repulsion, polarization, and dispersion potentials, which are generated for a chosen DFT functional for a given isolated molecule. The method does not have fitted parameters, except for implicit parameters within a chosen functional and the dispersion correction to the potential. The electrostatic potential is modeled with a multipolar expansion at each atomic center and bond midpoint using Stone's distributed multipolar analysis. The exchange-repulsion potential between two fragments is composed of the overlap and kinetic energy integrals and the nondiagonal KS matrices in the localized molecular orbital basis. The polarization potential is derived from the static molecular polarizability. The dispersion potential includes the intermolecular D3 dispersion correction of Grimme et al. [J. Chem. Phys. 132, 154104 (2010)]. The potential generated from the CAMB3LYP functional has mean unsigned errors (MUEs) with respect to results from coupled cluster singles, doubles, and perturbative triples with a complete basis set limit (CCSD(T)/CBS) extrapolation, of 1.7, 2.2, 2.0, and 0.5 kcal/mol, for the S22, water-benzene clusters, water clusters, and n-alkane dimers benchmark sets, respectively. The corresponding EFP2-HF errors for the respective benchmarks are 2.41, 3.1, 1.8, and 2.5 kcal/mol. Thus, the new EFP2-DFT-D3 method with the CAMB3LYP functional provides comparable or improved results at lower computational cost and, therefore, extends the range of applicability of EFP2 to larger system sizes.
Pousga Kabore; Husam Baki; Hong Yue; Hong Wang
2005-01-01
This paper presents a linearized approach for the controller design of the shape of output probability density functions for general stochastic systems. A square root approximation to an output probability density function is realized by a set of B-spline functions. This generally produces a nonlinear state space model for the weights of the B-spline approximation. A linearized model is therefore obtained and embedded into a performance function that measures the tracking error of the output probability density function with respect to a given distribution. By using this performance function as a Lyapunov function for the closed loop system, a feedback control input has been obtained which guarantees closed loop stability and realizes perfect tracking. The algorithm described in this paper has been tested on a simulated example and desired results have been achieved.
Time dependent density functional calculation of plasmon response in clusters
Wang Feng(王锋); Zhang Feng-Shou(张丰收); Eric Suraud
2003-01-01
We have introduced a theoretical scheme for the efficient description of the optical response of a cluster based on the time-dependent density functional theory. The practical implementation is done by means of the fully fledged timedependent local density approximation scheme, which is solved directly in the time domain without any linearization.As an example we consider the simple Na2 cluster and compute its surface plasmon photoabsorption cross section, which is in good agreement with the experiments.
Density functional calculations of spin-wave dispersion curves.
Kleinman, Leonard; Niu, Qian
1998-03-01
Extending the density functional method of Kubler et al( J. Kubler et al, J. Phys. F 18, 469 (1983) and J. Phys. Condens. Matter 1, 8155 (1989). ) for calcuating spin density wave ground states (but not making their atomic sphere approximation which requires a constant spin polarization direction in each WS sphere) we dicuss the calculation of frozen spin-wave eigenfunctions and their total energies. From these and the results of Niu's talk, we describe the calculation of spin-wave frequencies.
Pandey, Anup; Scherich, Heath; Drabold, D. A.
2017-01-01
Density functional theory (DFT) calculations are carried out to study the structure and electronic structure of amorphous zinc oxide (a-ZnO). The models were prepared by the "melt-quench" method. The models are chemically ordered with some coordination defects. The effect of trivalent dopants in the structure and electronic properties of a-ZnO is investigated. Models of a-X_0.375 Z_0.625 O (X=Al, Ga and In) were also prepared by the "melt- quench" method. The trivalent dopants reduce the four-fold Zn and O, thereby introducing some coordination defects in the network. The dopants prefer to bond with O atom. The network topology is discussed in detail. Dopants reduce the gap in EDOS by producing defect states minimum while maintaining the extended nature of the conduction band edge.
Transport through correlated systems with density functional theory
Kurth, S.; Stefanucci, G.
2017-10-01
We present recent advances in density functional theory (DFT) for applications in the field of quantum transport, with particular emphasis on transport through strongly correlated systems. We review the foundations of the popular Landauer–Büttiker(LB) + DFT approach. This formalism, when using approximations to the exchange-correlation (xc) potential with steps at integer occupation, correctly captures the Kondo plateau in the zero bias conductance at zero temperature but completely fails to capture the transition to the Coulomb blockade (CB) regime as the temperature increases. To overcome the limitations of LB + DFT, the quantum transport problem is treated from a time-dependent (TD) perspective using TDDFT, an exact framework to deal with nonequilibrium situations. The steady-state limit of TDDFT shows that in addition to an xc potential in the junction, there also exists an xc correction to the applied bias. Open shell molecules in the CB regime provide the most striking examples of the importance of the xc bias correction. Using the Anderson model as guidance we estimate these corrections in the limit of zero bias. For the general case we put forward a steady-state DFT which is based on one-to-one correspondence between the pair of basic variables, steady density on and steady current across the junction and the pair local potential on and bias across the junction. Like TDDFT, this framework also leads to both an xc potential in the junction and an xc correction to the bias. Unlike TDDFT, these potentials are independent of history. We highlight the universal features of both xc potential and xc bias corrections for junctions in the CB regime and provide an accurate parametrization for the Anderson model at arbitrary temperatures and interaction strengths, thus providing a unified DFT description for both Kondo and CB regimes and the transition between them.
Complex spectrum of spin models for finite-density QCD
Nishimura, Hiromichi; Pangeni, Kamal
2016-01-01
We consider the spectrum of transfer matrix eigenvalues associated with Polyakov loops in lattice QCD at strong coupling. The transfer matrix at finite density is non-Hermitian, and its eigenvalues become complex as a manifestation of the sign problem. We show that the symmetry under charge conjugation and complex conjugation ensures that the eigenvalues are either real or part of a complex conjugate pair, and the complex pairs lead to damped oscillatory behavior in Polyakov loop correlation functions, which also appeared in our previous phenomenological models using complex saddle points. We argue that this effect should be observable in lattice simulations of QCD at finite density.
A Probability Density Function for Neutrino Masses and Mixings
Fortin, Jean-François; Marleau, Luc
2016-01-01
The anarchy principle leading to the see-saw ensemble is studied analytically with the usual tools of random matrix theory. The probability density function for the see-saw ensemble of $N\\times N$ matrices is obtained in terms of a multidimensional integral. This integral involves all light neutrino masses, leading to a complicated probability density function. It is shown that the probability density function for the neutrino mixing angles and phases is the appropriate Haar measure. The decoupling of the light neutrino masses and neutrino mixings implies no correlation between the neutrino mass eigenstates and the neutrino mixing matrix, in contradiction with observations but in agreement with some of the claims found in the literature.
Probability density function for neutrino masses and mixings
Fortin, Jean-François; Giasson, Nicolas; Marleau, Luc
2016-12-01
The anarchy principle leading to the seesaw ensemble is studied analytically with the usual tools of random matrix theory. The probability density function for the seesaw ensemble of N ×N matrices is obtained in terms of a multidimensional integral. This integral involves all light neutrino masses, leading to a complicated probability density function. It is shown that the probability density function for the neutrino mixing angles and phases is the appropriate Haar measure. The decoupling of the light neutrino masses and neutrino mixings implies no correlation between the neutrino mass eigenstates and the neutrino mixing matrix and leads to a loss of predictive power when comparing with observations. This decoupling is in agreement with some of the claims found in the literature.
Nuclear energy density functional inspired by an effective field theory
Papakonstantinou, Panagiota; Lim, Yeunhwan; Hyun, Chang Ho
2016-01-01
Inspired by an effective field theory (EFT) for Fermi systems, we write the nuclear energy density functional (EDF) as an expansion in powers of the Fermi momentum $k_F$, or the cubic root of the density $\\rho^{1/3}$. With the help of pseudodata from microscopic calculations we fit the coefficients of the functional within a wide range of densities relevant for nuclei and neutron stars. The functional already at low order can reproduce known or adopted values of nuclear matter near saturation, a range of existing microscopic results on asymmetric matter, and a neutron-star mass-radius relation consistent with observations. Our approach leads to a transparent expansion of Skyrme-type EDFs and opens up many possibilities for future explorations in nuclei and homogeneous matter.
Density functional approach to the many-body problem : Key concepts and exact functionals
2003-01-01
We give an overview of the fundamental concepts of density functional theory. We give a careful discussion of the several density functionals and their differentiability properties. We show that for nondegenerate ground states we can calculate the necessary functional derivatives by means of linear
Filtered density function approach for reactive transport in groundwater
Suciu, Nicolae; Schüler, Lennart; Attinger, Sabine; Knabner, Peter
2016-04-01
Spatial filtering may be used in coarse-grained simulations (CGS) of reactive transport in groundwater, similar to the large eddy simulations (LES) in turbulence. The filtered density function (FDF), stochastically equivalent to a probability density function (PDF), provides a statistical description of the sub-grid, unresolved, variability of the concentration field. Besides closing the chemical source terms in the transport equation for the mean concentration, like in LES-FDF methods, the CGS-FDF approach aims at quantifying the uncertainty over the whole hierarchy of heterogeneity scales exhibited by natural porous media. Practically, that means estimating concentration PDFs on coarse grids, at affordable computational costs. To cope with the high dimensionality of the problem in case of multi-component reactive transport and to reduce the numerical diffusion, FDF equations are solved by particle methods. But, while trajectories of computational particles are modeled as stochastic processes indexed by time, the concentration's heterogeneity is modeled as a random field, with multi-dimensional, spatio-temporal sets of indices. To overcome this conceptual inconsistency, we consider FDFs/PDFs of random species concentrations weighted by conserved scalars and we show that their evolution equations can be formulated as Fokker-Planck equations describing stochastically equivalent processes in concentration-position spaces. Numerical solutions can then be approximated by the density in the concentration-position space of an ensemble of computational particles governed by the associated Itô equations. Instead of sequential particle methods we use a global random walk (GRW) algorithm, which is stable, free of numerical diffusion, and practically insensitive to the increase of the number of particles. We illustrate the general FDF approach and the GRW numerical solution for a reduced complexity problem consisting of the transport of a single scalar in groundwater
Antisites in III-V semiconductors: Density functional theory calculations
Chroneos, A.
2014-07-14
Density functional based simulation, corrected for finite size effects, is used to investigate systematically the formation of antisite defects in III-V semiconductors (III=Al, Ga, and In and V=P, As, and Sb). Different charge states are modelled as a function of the Fermi level and under different growth conditions. The formation energies of group III antisites (III V q) decrease with increasing covalent radius of the group V atom though not group III radius, whereas group V antisites (V I I I q) show a consistent decrease in formation energies with increase in group III and group V covalent radii. In general, III V q defects dominate under III-rich conditions and V I I I q under V-rich conditions. Comparison with equivalent vacancy formation energy simulations shows that while antisite concentrations are always dominant under stoichiometric conditions, modest variation in growth or doping conditions can lead to a significantly higher concentration of vacancies. © 2014 AIP Publishing LLC.
Hardness of FeB4: density functional theory investigation.
Zhang, Miao; Lu, Mingchun; Du, Yonghui; Gao, Lili; Lu, Cheng; Liu, Hanyu
2014-05-07
A recent experimental study reported the successful synthesis of an orthorhombic FeB4 with a high hardness of 62(5) GPa [H. Gou et al., Phys. Rev. Lett. 111, 157002 (2013)], which has reignited extensive interests on whether transition-metal borides compounds will become superhard materials. However, it is contradicted with some theoretical studies suggesting transition-metal boron compounds are unlikely to become superhard materials. Here, we examined structural and electronic properties of FeB4 using density functional theory. The electronic calculations show the good metallicity and covalent Fe-B bonding. Meanwhile, we extensively investigated stress-strain relations of FeB4 under various tensile and shear loading directions. The calculated weakest tensile and shear stresses are 40 GPa and 25 GPa, respectively. Further simulations (e.g., electron localization function and bond length along the weakest loading direction) on FeB4 show the weak Fe-B bonding is responsible for this low hardness. Moreover, these results are consistent with the value of Vickers hardness (11.7-32.3 GPa) by employing different empirical hardness models and below the superhardness threshold of 40 GPa. Our current results suggest FeB4 is a hard material and unlikely to become superhard (>40 GPa).
Antisites in III-V semiconductors: Density functional theory calculations
Chroneos, A., E-mail: alex.chroneos@open.ac.uk [Engineering and Innovation, The Open University, Milton Keynes MK7 6AA (United Kingdom); Tahini, H. A. [Department of Materials, Imperial College London, London SW7 2AZ (United Kingdom); PSE Division, KAUST, Thuwal 23955-6900 (Saudi Arabia); Schwingenschlögl, U., E-mail: udo.schwingenschlogl@kaust.edu.sa [PSE Division, KAUST, Thuwal 23955-6900 (Saudi Arabia); Grimes, R. W., E-mail: r.grimes@imperial.ac.uk [Department of Materials, Imperial College London, London SW7 2AZ (United Kingdom)
2014-07-14
Density functional based simulation, corrected for finite size effects, is used to investigate systematically the formation of antisite defects in III-V semiconductors (III = Al, Ga, and In and V = P, As, and Sb). Different charge states are modelled as a function of the Fermi level and under different growth conditions. The formation energies of group III antisites (III{sub V}{sup q}) decrease with increasing covalent radius of the group V atom though not group III radius, whereas group V antisites (V{sub III}{sup q}) show a consistent decrease in formation energies with increase in group III and group V covalent radii. In general, III{sub V}{sup q} defects dominate under III-rich conditions and V{sub III}{sup q} under V-rich conditions. Comparison with equivalent vacancy formation energy simulations shows that while antisite concentrations are always dominant under stoichiometric conditions, modest variation in growth or doping conditions can lead to a significantly higher concentration of vacancies.
Multireference spin-adapted variant of density functional theory.
Khait, Yuriy G; Hoffmann, Mark R
2004-03-15
A new Kohn-Sham formalism is developed for studying the lowest molecular electronic states of given space and spin symmetry whose densities are represented by weighted sums of several reference configurations. Unlike standard spin-density functional theory, the new formalism uses total spin conserving spin-density operators and spin-invariant density matrices so that the method is fully spin-adapted and solves the so-called spin-symmetry dilemma. The formalism permits the use of an arbitrary set of reference (noninteracting) configurations with any number of open shells. It is shown that the requirement of degeneracy of the total noninteracting energies of the reference configurations (or configuration state functions) is equivalent to the stationary condition of the exact energy relative to the weights of the configurations (or configuration state functions). Consequently, at any molecular geometry, the weights can be determined by minimization of the energy, and, for given reference weights, the Kohn-Sham orbitals can be determined. From this viewpoint, the developed theory can be interpreted as an analog of the multiconfiguration self-consistent field approach within density functional theory.
Pernal, Katarzyna
2012-05-14
Time-dependent density functional theory (TD-DFT) in the adiabatic formulation exhibits known failures when applied to predicting excitation energies. One of them is the lack of the doubly excited configurations. On the other hand, the time-dependent theory based on a one-electron reduced density matrix functional (time-dependent density matrix functional theory, TD-DMFT) has proven accurate in determining single and double excitations of H(2) molecule if the exact functional is employed in the adiabatic approximation. We propose a new approach for computing excited state energies that relies on functionals of electron density and one-electron reduced density matrix, where the latter is applied in the long-range region of electron-electron interactions. A similar approach has been recently successfully employed in predicting ground state potential energy curves of diatomic molecules even in the dissociation limit, where static correlation effects are dominating. In the paper, a time-dependent functional theory based on the range-separation of electronic interaction operator is rigorously formulated. To turn the approach into a practical scheme the adiabatic approximation is proposed for the short- and long-range components of the coupling matrix present in the linear response equations. In the end, the problem of finding excitation energies is turned into an eigenproblem for a symmetric matrix. Assignment of obtained excitations is discussed and it is shown how to identify double excitations from the analysis of approximate transition density matrix elements. The proposed method used with the short-range local density approximation (srLDA) and the long-range Buijse-Baerends density matrix functional (lrBB) is applied to H(2) molecule (at equilibrium geometry and in the dissociation limit) and to Be atom. The method accounts for double excitations in the investigated systems but, unfortunately, the accuracy of some of them is poor. The quality of the other
Exploration of a modified density dependence in the Skyrme functional
Erler, J; Reinhard, P -G
2010-01-01
A variant of the basic Skyrme-Hartree-Fock (SHF) functional is considered dealing with a new form of density dependence. It employs only integer powers and thus will allow a more sound basis for projection schemes (particle number, angular momentum). We optimize the new functional with exactly the same adjustment strategy as used in an earlier study with a standard Skyrme functional. This allows direct comparisons of the performance of the new functional relative to the standard one. We discuss various observables: bulk properties of finite nuclei, nuclear matter, giant resonances, super-heavy elements, and energy systematics. The new functional performs at least as well as the standard one, but offers a wider range of applicability (e.g. for projection) and more flexibility in the regime of high densities.
Choosing a density functional for static molecular polarizabilities
Wu, Taozhe; Thakkar, Ajit J
2015-01-01
Coupled-cluster calculations of static electronic dipole polarizabilities for 145 organic molecules are performed to create a reference data set. The molecules are composed from carbon, hydrogen, nitrogen, oxygen, fluorine, sulfur, chlorine, and bromine atoms. They range in size from triatomics to 14 atoms. The Hartree-Fock and 2nd-order M{\\o}ller-Plesset methods and 34 density functionals, including local functionals, global hybrid functionals, and range-separated functionals of the long-range-corrected and screened-exchange varieties, are tested against this data set. On the basis of the test results, detailed recommendations are made for selecting density functionals for polarizability computations on relatively small organic molecules.
Probability distribution functions in the finite density lattice QCD
Ejiri, S; Aoki, S; Kanaya, K; Saito, H; Hatsuda, T; Ohno, H; Umeda, T
2012-01-01
We study the phase structure of QCD at high temperature and density by lattice QCD simulations adopting a histogram method. We try to solve the problems which arise in the numerical study of the finite density QCD, focusing on the probability distribution function (histogram). As a first step, we investigate the quark mass dependence and the chemical potential dependence of the probability distribution function as a function of the Polyakov loop when all quark masses are sufficiently large, and study the properties of the distribution function. The effect from the complex phase of the quark determinant is estimated explicitly. The shape of the distribution function changes with the quark mass and the chemical potential. Through the shape of the distribution, the critical surface which separates the first order transition and crossover regions in the heavy quark region is determined for the 2+1-flavor case.
Crystallization induced by multiple seeds: dynamical density functional approach.
Neuhaus, T; Schmiedeberg, M; Löwen, H
2013-12-01
Using microscopic dynamical density functional theory, we calculate the dynamical formation of polycrystals by following the crystal growth around multiple crystalline seeds imposed to an undercooled fluid. Depending on the undercooling and the size ratio as well as the relative crystal orientation of two neighboring seeds, three possibilities of the final state emerge, namely no crystallization at all, formation of a monocrystal, or two crystallites separated by a curved grain boundary. Our results, which are obtained for two-dimensional hard disk systems using a fundamental-measure density functional, shed new light on the particle-resolved structure and growth of polycrystalline material in general.
周世琦
2002-01-01
In this Letter, we truncate the functional expansion of the non-uniform first-order direct correlation function (DCF) around the bulk density at the lowest order. But the truncation is performed formally and exactly by making use of functional counterpart of the Lagrangian theorem of differential calculus. Consequently the expansion coefficient, i.e. the uniform second-order DCF, is replaced by its non-uniform counterpart whose density argument is an appropriate mixture of calculated density distribution and the bulk density with a mixing parameter determined by a hard-wall sum rule. The non-uniform second-order DCF is then approximated by the uniform second-order DCF with an appropriate weighted density as its density argument. The present formally exact truncated functional expansion predicts the density distribution in good agreement with simulation data for hard sphere and Lennard-Jones fluid exerted by an external field.
Parameterizing deep convection using the assumed probability density function method
R. L. Storer
2014-06-01
Full Text Available Due to their coarse horizontal resolution, present-day climate models must parameterize deep convection. This paper presents single-column simulations of deep convection using a probability density function (PDF parameterization. The PDF parameterization predicts the PDF of subgrid variability of turbulence, clouds, and hydrometeors. That variability is interfaced to a prognostic microphysics scheme using a Monte Carlo sampling method. The PDF parameterization is used to simulate tropical deep convection, the transition from shallow to deep convection over land, and mid-latitude deep convection. These parameterized single-column simulations are compared with 3-D reference simulations. The agreement is satisfactory except when the convective forcing is weak. The same PDF parameterization is also used to simulate shallow cumulus and stratocumulus layers. The PDF method is sufficiently general to adequately simulate these five deep, shallow, and stratiform cloud cases with a single equation set. This raises hopes that it may be possible in the future, with further refinements at coarse time step and grid spacing, to parameterize all cloud types in a large-scale model in a unified way.
Specification of Density Functional Approximation by Radial Distribution Function of Bulk Fluid
ZHOU Shi-Qi
2002-01-01
A systematic methodology is proposed to deal with the weighted density approximation version of clas-sical density functional theory by employing the knowledge of radial distribution function of bulk fluid. The presentmethodology results from the concept of universality of the free energy density functional combined with the test particlemethod. It is shown that the new method is very accurate for the predictions of density distribution ofa hard sphere fluidat different confining geometries. The physical foundation of the present methodology is also applied to the quantumdensity functional theory.
Robust functional statistics applied to Probability Density Function shape screening of sEMG data.
Boudaoud, S; Rix, H; Al Harrach, M; Marin, F
2014-01-01
Recent studies pointed out possible shape modifications of the Probability Density Function (PDF) of surface electromyographical (sEMG) data according to several contexts like fatigue and muscle force increase. Following this idea, criteria have been proposed to monitor these shape modifications mainly using High Order Statistics (HOS) parameters like skewness and kurtosis. In experimental conditions, these parameters are confronted with small sample size in the estimation process. This small sample size induces errors in the estimated HOS parameters restraining real-time and precise sEMG PDF shape monitoring. Recently, a functional formalism, the Core Shape Model (CSM), has been used to analyse shape modifications of PDF curves. In this work, taking inspiration from CSM method, robust functional statistics are proposed to emulate both skewness and kurtosis behaviors. These functional statistics combine both kernel density estimation and PDF shape distances to evaluate shape modifications even in presence of small sample size. Then, the proposed statistics are tested, using Monte Carlo simulations, on both normal and Log-normal PDFs that mimic observed sEMG PDF shape behavior during muscle contraction. According to the obtained results, the functional statistics seem to be more robust than HOS parameters to small sample size effect and more accurate in sEMG PDF shape screening applications.
Current Density and Continuity in Discretized Models
Boykin, Timothy B.; Luisier, Mathieu; Klimeck, Gerhard
2010-01-01
Discrete approaches have long been used in numerical modelling of physical systems in both research and teaching. Discrete versions of the Schrodinger equation employing either one or several basis functions per mesh point are often used by senior undergraduates and beginning graduate students in computational physics projects. In studying…
Kesharwani, Manoj Kumar; Martin, Jan M L
2015-01-01
We have compared the performance of Grimme style DH/DSD and Zhang-Xu-Goddard type xDH/xDSD forms for double hybrids. In the DH and DSD forms, KS orbitals with elevated HF exchange and damped DFT correlation are used, while in the xDH and xDSD forms, the KS orbitals are obtained from a conventional hybrid functional with undamped DFT correlation. Generally, the difference in performance between DSD and xDSD functionals is small, slightly favoring xDSD. Augmentation of the xDH form with either same-spin MP2 correlation or a dispersion correction markedly improves performance. Best xDSD results appear to be obtained for orbitals obtained with `exact exchange' fractions in the 50-70% range. The orbitals for xDSD appear to be fairly transferable between different correlation functionals.
Benchmark density functional theory calculations for nanoscale conductance
Strange, Mikkel; Bækgaard, Iben Sig Buur; Thygesen, Kristian Sommer;
2008-01-01
We present a set of benchmark calculations for the Kohn-Sham elastic transmission function of five representative single-molecule junctions. The transmission functions are calculated using two different density functional theory methods, namely an ultrasoft pseudopotential plane-wave code...... in combination with maximally localized Wannier functions and the norm-conserving pseudopotential code SIESTA which applies an atomic orbital basis set. All calculations have been converged with respect to the supercell size and the number of k(parallel to) points in the surface plane. For all systems we find...
Dutton, Andrew S; Suhrada, Christopher P; Miranda, Katrina M; Wink, David A; Fukuto, Jon M; Houk, K N
2006-03-20
Isopropylamine diazeniumdiolate, IPA/NO, the product of the reaction of isopropylamine and nitric oxide, NO, decomposes in a pH-dependent manner to afford nitroxyl, HNO, in the pH range of 13 to above 5, and NO below pH 7. Theoretical studies using B3LYP/6-311+G(d) density functional theory, the polarizable continuum and conductor-like polarizable continuum solvation models, and the high-accuracy CBS-QB3 method on the simplified model compound methylamine diazeniumdiolate predict a mechanism involving HNO production via decomposition of the unstable tautomer MeNN+(O-)NHO-. The production of NO at lower pH is predicted to result from fragmentation of the amide/NO adduct upon protonation of the amine nitrogen.
Dutton, Andrew S.; Suhrada, Christopher P.; Miranda, Katrina M.; Wink, David A.; Fukuto, Jon M.; Houk, K. N.
2011-01-01
Isopropylamine diazeniumdiolate, IPA/NO, the product of the reaction of isopropylamine and nitric oxide, NO, decomposes in a pH dependent manner to afford nitroxyl, HNO, in the pH range of 13 to above 5 and NO below pH 7. Theoretical studies using B3LYP/6-311+G(d) density functional theory, the PCM and CPCM solvation models and the high accuracy CBS-QB3 method on the simplified model compound, methylamine diazeniumdiolate, predict a mechanism involving HNO production via decomposition of the unstable tautomer MeNN+(O−)NHO−. The production of NO at lower pH is predicted to result from fragmentation of the amide/NO adduct upon protonation of the amine nitrogen. PMID:16529464
Benchmarking Density Functionals for Chemical Bonds of Gold
Kepp, Kasper Planeta
2017-01-01
Gold plays a major role in nanochemistry, catalysis, and electrochemistry. Accordingly, hundreds of studies apply density functionals to study chemical bonding with gold, yet there is no systematic attempt to assess the accuracy of these methods applied to gold. This paper reports a benchmark...... against 51 experimental bond enthalpies of AuX systems and seven additional polyatomic and cationic molecules. Twelve density functionals were tested, covering meta functionals, hybrids with variable HF exchange, double-hybrid, dispersion-corrected, and nonhybrid GGA functionals. The defined benchmark...... bonds between gold and noble gases. Zero-point vibrational corrections are relatively small for Au-X bonds, ∼ 11-12 kJ/mol except for Au-H bonds. Dispersion typically provides ∼5 kJ/mol of the total bond enthalpy but grows with system size and is 10 kJ/mol for AuXe and AuKr. HF exchange and LYP...
Density-based mixing parameter for hybrid functionals
Marques, Miguel A. L.; Vidal, Julien; Oliveira, Micael J. T.; Reining, Lucia; Botti, Silvana
2011-01-01
A very popular ab initio scheme to calculate electronic properties in solids is the use of hybrid functionals in density functional theory (DFT) that mixes a portion of the Fock exchange with DFT functionals. In spite of its success, a major problem still remains, related to the use of one single mixing parameter for all materials. Guided by physical arguments that connect the mixing parameter to the dielectric properties of the solid, and ultimately to its band gap, we propose a method to calculate this parameter from the electronic density alone. This approach is able to cut significantly the error of traditional hybrid functionals for large and small gap materials, while retaining a good description of the structural properties. Moreover, its implementation is simple and leads to a negligible increase of the computational time.
Linear density response function in the projector augmented wave method
Yan, Jun; Mortensen, Jens Jørgen; Jacobsen, Karsten Wedel;
2011-01-01
We present an implementation of the linear density response function within the projector-augmented wave method with applications to the linear optical and dielectric properties of both solids, surfaces, and interfaces. The response function is represented in plane waves while the single......-particle eigenstates can be expanded on a real space grid or in atomic-orbital basis for increased efficiency. The exchange-correlation kernel is treated at the level of the adiabatic local density approximation (ALDA) and crystal local field effects are included. The calculated static and dynamical dielectric...... functions of Si, C, SiC, AlP, and GaAs compare well with previous calculations. While optical properties of semiconductors, in particular excitonic effects, are generally not well described by ALDA, we obtain excellent agreement with experiments for the surface loss function of graphene and the Mg(0001...
Efficient Diffuse Basis Sets for Density Functional Theory.
Papajak, Ewa; Truhlar, Donald G
2010-03-09
Eliminating all but the s and p diffuse functions on the non-hydrogenic atoms and all diffuse functions on the hydrogen atoms from the aug-cc-pV(x+d)Z basis sets of Dunning and co-workers, where x = D, T, Q, ..., yields the previously proposed "minimally augmented" basis sets, called maug-cc-pV(x+d)Z. Here, we present extensive and systematic tests of these basis sets for density functional calculations of chemical reaction barrier heights, hydrogen bond energies, electron affinities, ionization potentials, and atomization energies. The tests show that the maug-cc-pV(x+d)Z basis sets are as accurate as the aug-cc-pV(x+d)Z ones for density functional calculations, but the computational cost savings are a factor of about two to seven.
SDAVANI; NMERSIN; BROYER; BKANTELIP; JPKANTELIP
2004-01-01
AIM: Cellular cardiomyoplasty is promising for improving postinfarcted cardiac function. Over the past decade, a variety of cell types have been proposed including mononuclear bone marrow cells. The latter contains different lineages including mesenchymal stem cells (MSCs). The aim of this study was to analyse the differentiation pathways of engrafted syngenic mesenchymal progenitor cells (MPCs) obtained in culture from bone marrow
Clustering and pasta phases in nuclear density functional theory
Schuetrumpf, Bastian; Nazarewicz, Witold
2016-01-01
Nuclear density functional theory (DFT) is the tool of choice in describing properties of complex nuclei and intricate phases of bulk nucleonic matter. It is a microscopic approach based on an energy density functional representing the nuclear interaction. An attractive feature of nuclear DFT is that it can be applied to both finite nuclei and pasta phases appearing in the inner crust of neutron stars. While nuclear pasta clusters in a neutron star can be easily characterized through their density distributions, the level of clustering of nucleons in a nucleus can often be difficult to assess. To this end, we use the concept of nucleonic localization. We demonstrate that the localization measure provides us with fingerprints of clusters in light and heavy nuclei, including fissioning systems. Furthermore we investigate the rod-like pasta phase using twist-averaged boundary conditions, which enable calculations in finite volumes accessible by state of the art DFT solvers.
Double-hybrid density-functional theory made rigorous
Sharkas, Kamal; Savin, Andreas
2010-01-01
We provide a rigorous derivation of a class of double-hybrid approximations, combining Hartree-Fock exchange and second-order Moller-Plesset correlation with a semilocal exchange-correlation density functional. These double-hybrid approximations contain only one empirical parameter and use a density-scaled correlation energy functional. Neglecting density scaling leads to an one-parameter version of the standard double-hybrid approximations. We assess the performance of these double-hybrid schemes on representative test sets of atomization energies and reaction barrier heights, and we compare to other hybrid approximations, including range-separated hybrids. Our best one-parameter double-hybrid approximation, called 1DH-BLYP, roughly reproduces the two parameters of the standard B2-PLYP or B2GP-PLYP double-hybrid approximations, which shows that these methods are not only empirically close to an optimum for general chemical applications but are also theoretically supported.
Relativistic density functional theory for finite nuclei and neutron stars
Piekarewicz, J
2015-01-01
The main goal of the present contribution is a pedagogical introduction to the fascinating world of neutron stars by relying on relativistic density functional theory. Density functional theory provides a powerful--and perhaps unique--framework for the calculation of both the properties of finite nuclei and neutron stars. Given the enormous densities that may be reached in the core of neutron stars, it is essential that such theoretical framework incorporates from the outset the basic principles of Lorentz covariance and special relativity. After a brief historical perspective, we present the necessary details required to compute the equation of state of dense, neutron-rich matter. As the equation of state is all that is needed to compute the structure of neutron stars, we discuss how nuclear physics--particularly certain kind of laboratory experiments--can provide significant constrains on the behavior of neutron-rich matter.
Probability density functions of instantaneous Stokes parameters on weak scattering
Chen, Xi; Korotkova, Olga
2017-10-01
The single-point probability density functions (PDF) of the instantaneous Stokes parameters of a polarized plane-wave light field scattered from a three-dimensional, statistically stationary, weak medium with Gaussian statistics and Gaussian correlation function have been studied for the first time. Apart from the scattering geometry the PDF distributions of the scattered light have been related to the illumination's polarization state and the correlation properties of the medium.
Is Density Functional Theory adequate for quantum transport?
Burke, Kieron
2007-03-01
Density functional calculations for the electronic conductance of single molecules attached to leads are now common. I'll examine the methodology from a rigorous point of view, discussing where it can be expected to work, and where it should fail. When molecules are weakly coupled to leads, local and gradient-corrected approximations fail, as the Kohn-Sham levels are misaligned. In the weak bias regime, XC corrections to the current are missed by the standard methodology. Finally, I will compare and contrast several new methodologies that go beyond the present standard approach of applying the Landauer formula to ground-state DFT. Self-interaction errors in density functional calculations of electronictransport, C. Toher, A. Filippetti, S. Sanvito, and K. Burke, Phys. Rev. Lett. 95, 146402 (2005) The Dramatic Role of the Exchange-Correlation Potential in ab initio Electron Transport Calculations, S-H. Ke, H.U. Baranger, and W. Yang, cond-mat/0609367. Zero-bias molecular electronics: Exchange-correlation corrections to Landauer's formula, M. Koentopp, K. Burke, and F. Evers, Phys. Rev. B Rapid Comm., 73, 121403 (2006). Density Functional Theory of the Electrical Conductivity of Molecular Devices, K. Burke, Roberto Car, and Ralph Gebauer, Phys. Rev. Lett. 94, 146803 (2005). Density functional calculations of nanoscale conductance, Connie Chang, Max Koentopp, Kieron Burke, and Roberto Car, in prep.
Effective Maxwell Equations from Time-dependent Density Functional Theory
Weinan E; Jianfeng LU; Xu YANG
2011-01-01
The behavior of interacting electrons in a perfect crystal under macroscopic external electric and magnetic fields is studied. Effective Maxwell equations for the macroscopic electric and magnetic fields are derived starting from time-dependent density functional theory. Effective permittivity and permeability coefficients are obtained.
Density functional theory in surface science and heterogeneous catalysis
Nørskov, Jens Kehlet; Scheffler, M.; Toulhoat, H.
2006-01-01
amount of experimental data gathered during the last decades. This article shows how density functional theory can be used to describe the state of the surface during reactions and the rate of catalytic reactions. It will also show how we are beginning to understand the variation in catalytic activity...
Implementation Strategies for Orbital-dependent Density Functionals
Bento, Marsal E.; Vieira, Daniel
2016-12-01
The development of density functional theory (DFT) has been focused primarily on two main pillars: (1) the pursuit of more accurate exchange-correlation (XC) density functionals; (2) the feasibility of computational implementation when dealing with many-body systems. In this context, this work is aimed on using one-dimensional quantum systems as theoretical laboratories to investigate the implementation of orbital functionals (OFs) of density. By definition, OFs are those which depend only implicitly on the density, via an explicit formulation in terms of Kohn-Sham orbitals. Typical examples are the XC functionals arising from the Perdew-Zunger self-interaction correction (PZSIC). Formally, via Kohn-Sham equations, the implementation of OFs must be performed by means of the optimized effective potential method (OEP), which is known by requiring an excessive computational effort even when dealing with few electrons systems. Here, we proceed a systematical investigation aiming to simplify or avoid the OEP procedure, taking as reference the implementation of the PZSIC correction applied to one-dimensional Hubbard chains.
Equilibrium time correlation functions in the low density limit
Beijeren, H. van; Lanford, O.E.; Lebowitz, J.L.; Spohn, H.
1980-01-01
We consider a system of hard spheres in thermal equilibrium. Using Lanford's result about the convergence of the solutions of the BBGKY hierarchy to the solutions of the Boltzmann hierarchy, we show that in the low-density limit (Boltzmann-Grad limit): (i) the total time correlation function is
Exact ensemble density-functional theory for excited states
Yang, Zeng-hui; Pribram-Jones, Aurora; Burke, Kieron; Needs, Richard J; Ullrich, Carsten A
2014-01-01
We construct exact Kohn-Sham potentials for the ensemble density-functional theory (EDFT) of excited states from the ground and excited states of helium. The exchange-correlation potential is compared with current approximations, which miss prominent features. The ensemble derivative discontinuity is tested, and the virial theorem is proven and illustrated.
Reproducibility in density functional theory calculations of solids
Lejaeghere, Kurt; Bihlmayer, Gustav; Björkman, Torbjörn
2016-01-01
The widespread popularity of density functional theory has given rise to an extensive range of dedicated codes for predicting molecular and crystalline properties. However, each code implements the formalism in a different way, raising questions about the reproducibility of such predictions. We r...
Implementation Strategies for Orbital-dependent Density Functionals
Bento, Marsal E.; Vieira, Daniel
2016-10-01
The development of density functional theory (DFT) has been focused primarily on two main pillars: (1) the pursuit of more accurate exchange-correlation (XC) density functionals; (2) the feasibility of computational implementation when dealing with many-body systems. In this context, this work is aimed on using one-dimensional quantum systems as theoretical laboratories to investigate the implementation of orbital functionals (OFs) of density. By definition, OFs are those which depend only implicitly on the density, via an explicit formulation in terms of Kohn-Sham orbitals. Typical examples are the XC functionals arising from the Perdew-Zunger self-interaction correction (PZSIC). Formally, via Kohn-Sham equations, the implementation of OFs must be performed by means of the optimized effective potential method (OEP), which is known by requiring an excessive computational effort even when dealing with few electrons systems. Here, we proceed a systematical investigation aiming to simplify or avoid the OEP procedure, taking as reference the implementation of the PZSIC correction applied to one-dimensional Hubbard chains.
Linear-response thermal time-dependent density functional theory
Pribram-Jones, Aurora; Burke, Kieron
2015-01-01
The van Leeuwen proof of linear-response time-dependent density functional theory (TDDFT) is generalized to thermal ensembles. This allows generalization to finite temperatures of the Gross-Kohn relation, the exchange-correlation kernel of TDDFT, and fluctuation dissipation theorem for DFT. This produces a natural method for generating new thermal exchange-correlation (XC) approximations.
Density functional theory is straying from the path toward the exact functional.
Medvedev, Michael G; Bushmarinov, Ivan S; Sun, Jianwei; Perdew, John P; Lyssenko, Konstantin A
2017-01-06
The theorems at the core of density functional theory (DFT) state that the energy of a many-electron system in its ground state is fully defined by its electron density distribution. This connection is made via the exact functional for the energy, which minimizes at the exact density. For years, DFT development focused on energies, implicitly assuming that functionals producing better energies become better approximations of the exact functional. We examined the other side of the coin: the energy-minimizing electron densities for atomic species, as produced by 128 historical and modern DFT functionals. We found that these densities became closer to the exact ones, reflecting theoretical advances, until the early 2000s, when this trend was reversed by unconstrained functionals sacrificing physical rigor for the flexibility of empirical fitting. Copyright © 2017, American Association for the Advancement of Science.
Tran, Fabien; Blaha, Peter
2017-05-04
Recently, exchange-correlation potentials in density functional theory were developed with the goal of providing improved band gaps in solids. Among them, the semilocal potentials are particularly interesting for large systems since they lead to calculations that are much faster than with hybrid functionals or methods like GW. We present an exhaustive comparison of semilocal exchange-correlation potentials for band gap calculations on a large test set of solids, and particular attention is paid to the potential HLE16 proposed by Verma and Truhlar. It is shown that the most accurate potential is the modified Becke-Johnson potential, which, most noticeably, is much more accurate than all other semilocal potentials for strongly correlated systems. This can be attributed to its additional dependence on the kinetic energy density. It is also shown that the modified Becke-Johnson potential is at least as accurate as the hybrid functionals and more reliable for solids with large band gaps.
Łazarski, Roman; Burow, Asbjörn Manfred; Grajciar, Lukáš; Sierka, Marek
2016-10-30
A full implementation of analytical energy gradients for molecular and periodic systems is reported in the TURBOMOLE program package within the framework of Kohn-Sham density functional theory using Gaussian-type orbitals as basis functions. Its key component is a combination of density fitting (DF) approximation and continuous fast multipole method (CFMM) that allows for an efficient calculation of the Coulomb energy gradient. For exchange-correlation part the hierarchical numerical integration scheme (Burow and Sierka, Journal of Chemical Theory and Computation 2011, 7, 3097) is extended to energy gradients. Computational efficiency and asymptotic O(N) scaling behavior of the implementation is demonstrated for various molecular and periodic model systems, with the largest unit cell of hematite containing 640 atoms and 19,072 basis functions. The overall computational effort of energy gradient is comparable to that of the Kohn-Sham matrix formation. © 2016 Wiley Periodicals, Inc.
An exospheric temperature model from CHAMP thermospheric density
Weng, Libin; Lei, Jiuhou; Sutton, Eric; Dou, Xiankang; Fang, Hanxian
2017-02-01
In this study, the effective exospheric temperature, named as T∞, derived from thermospheric densities measured by the CHAMP satellite during 2002-2010 was utilized to develop an exospheric temperature model (ETM) with the aid of the NRLMSISE-00 model. In the ETM, the temperature variations are characterized as a function of latitude, local time, season, and solar and geomagnetic activities. The ETM is validated by the independent GRACE measurements, and it is found that T∞ and thermospheric densities from the ETM are in better agreement with the GRACE data than those from the NRLMSISE-00 model. In addition, the ETM captures well the thermospheric equatorial anomaly feature, seasonal variation, and the hemispheric asymmetry in the thermosphere.
Performance model to predict overall defect density
J Venkatesh
2012-08-01
Full Text Available Management by metrics is the expectation from the IT service providers to stay as a differentiator. Given a project, the associated parameters and dynamics, the behaviour and outcome need to be predicted. There is lot of focus on the end state and in minimizing defect leakage as much as possible. In most of the cases, the actions taken are re-active. It is too late in the life cycle. Root cause analysis and corrective actions can be implemented only to the benefit of the next project. The focus has to shift left, towards the execution phase than waiting for lessons to be learnt post the implementation. How do we pro-actively predict defect metrics and have a preventive action plan in place. This paper illustrates the process performance model to predict overall defect density based on data from projects in an organization.
Kvaal, Simen; Helgaker, Trygve
2015-11-14
The relationship between the densities of ground-state wave functions (i.e., the minimizers of the Rayleigh-Ritz variation principle) and the ground-state densities in density-functional theory (i.e., the minimizers of the Hohenberg-Kohn variation principle) is studied within the framework of convex conjugation, in a generic setting covering molecular systems, solid-state systems, and more. Having introduced admissible density functionals as functionals that produce the exact ground-state energy for a given external potential by minimizing over densities in the Hohenberg-Kohn variation principle, necessary and sufficient conditions on such functionals are established to ensure that the Rayleigh-Ritz ground-state densities and the Hohenberg-Kohn ground-state densities are identical. We apply the results to molecular systems in the Born-Oppenheimer approximation. For any given potential v ∈ L(3/2)(ℝ(3)) + L(∞)(ℝ(3)), we establish a one-to-one correspondence between the mixed ground-state densities of the Rayleigh-Ritz variation principle and the mixed ground-state densities of the Hohenberg-Kohn variation principle when the Lieb density-matrix constrained-search universal density functional is taken as the admissible functional. A similar one-to-one correspondence is established between the pure ground-state densities of the Rayleigh-Ritz variation principle and the pure ground-state densities obtained using the Hohenberg-Kohn variation principle with the Levy-Lieb pure-state constrained-search functional. In other words, all physical ground-state densities (pure or mixed) are recovered with these functionals and no false densities (i.e., minimizing densities that are not physical) exist. The importance of topology (i.e., choice of Banach space of densities and potentials) is emphasized and illustrated. The relevance of these results for current-density-functional theory is examined.
Kehoe, Aoife B.; Scanlon, David O.; Watson, Graeme W.
2016-05-01
The geometric and electronic properties of a series of potential photovoltaic materials, the sulvanite structured \\text{C}{{\\text{u}}3}MC{{h}4} (M = V, Nb, Ta; Ch = S, Se, Te), have been computationally examined using both PBEsol+U and HSE06 methods to assess the materials’ suitability for solar cell application and to compare the predictions of the two theoretical approaches. The lattice parameters, electronic density of states, and band gaps of the compounds have been calculated to ascertain the experimental agreement obtained by each method and to determine if any of the systems have an optical band gap appropriate for photovoltaic absorber materials. The PBEsol+U results are shown to achieve better agreement with experiment than HSE06 in terms of both lattice constants and band gaps, demonstrating that higher level theoretical methods do not automatically result in a greater level of accuracy than their computationally less expensive counterparts. The PBEsol+U calculated optical band gaps of five materials suggest potential suitability as photovoltaic absorbers, with values of 1.72 eV, 1.49 eV, 1.19 eV, 1.46 eV, and 1.69 eV for Cu3VS4, Cu3VSe4, Cu3VTe4, Cu3NbTe4, and Cu3TaTe4, respectively, although it should be noted that all fundamental band gaps are indirect in nature, which could lower the open-circuit voltage and hence the efficiency of prospective devices.
Balawender, Robert
2009-01-01
The formalism developed in the first paper of the series [arXiv:0901.1060v3] is applied to two thermodynamic systems: (i) of three global observables (the energy, the total electron number and the spin number), (ii) of one global observable (the internal electron energy) and two local (position-dependent) observables (the total electron density and the spin density). The two-component potential of the many-electron system of interest is constructed of a scalar external potential and a collinear magnetic field (coupled only with the spin operator). Various equilibrium characteristics of two systems are defined and investigated. Conditions for the equivalence between two systems (the same equilibrium density matrix demanded) are derived and thoroughly discussed. The applicability of the Hohenberg-Kohn theorem is extended to the thermodynamic spin-density functional theory. Obtained results provide a rigorous mathematical foundation for future derivation of the zero-temperature limit of this theory and determina...
Numerical methods for high-dimensional probability density function equations
Cho, H.; Venturi, D.; Karniadakis, G. E.
2016-01-01
In this paper we address the problem of computing the numerical solution to kinetic partial differential equations involving many phase variables. These types of equations arise naturally in many different areas of mathematical physics, e.g., in particle systems (Liouville and Boltzmann equations), stochastic dynamical systems (Fokker-Planck and Dostupov-Pugachev equations), random wave theory (Malakhov-Saichev equations) and coarse-grained stochastic systems (Mori-Zwanzig equations). We propose three different classes of new algorithms addressing high-dimensionality: The first one is based on separated series expansions resulting in a sequence of low-dimensional problems that can be solved recursively and in parallel by using alternating direction methods. The second class of algorithms relies on truncation of interaction in low-orders that resembles the Bogoliubov-Born-Green-Kirkwood-Yvon (BBGKY) framework of kinetic gas theory and it yields a hierarchy of coupled probability density function equations. The third class of algorithms is based on high-dimensional model representations, e.g., the ANOVA method and probabilistic collocation methods. A common feature of all these approaches is that they are reducible to the problem of computing the solution to high-dimensional equations via a sequence of low-dimensional problems. The effectiveness of the new algorithms is demonstrated in numerical examples involving nonlinear stochastic dynamical systems and partial differential equations, with up to 120 variables.
Numerical methods for high-dimensional probability density function equations
Cho, H. [Department of Mathematics, University of Maryland College Park, College Park, MD 20742 (United States); Venturi, D. [Department of Applied Mathematics and Statistics, University of California Santa Cruz, Santa Cruz, CA 95064 (United States); Karniadakis, G.E., E-mail: gk@dam.brown.edu [Division of Applied Mathematics, Brown University, Providence, RI 02912 (United States)
2016-01-15
In this paper we address the problem of computing the numerical solution to kinetic partial differential equations involving many phase variables. These types of equations arise naturally in many different areas of mathematical physics, e.g., in particle systems (Liouville and Boltzmann equations), stochastic dynamical systems (Fokker–Planck and Dostupov–Pugachev equations), random wave theory (Malakhov–Saichev equations) and coarse-grained stochastic systems (Mori–Zwanzig equations). We propose three different classes of new algorithms addressing high-dimensionality: The first one is based on separated series expansions resulting in a sequence of low-dimensional problems that can be solved recursively and in parallel by using alternating direction methods. The second class of algorithms relies on truncation of interaction in low-orders that resembles the Bogoliubov–Born–Green–Kirkwood–Yvon (BBGKY) framework of kinetic gas theory and it yields a hierarchy of coupled probability density function equations. The third class of algorithms is based on high-dimensional model representations, e.g., the ANOVA method and probabilistic collocation methods. A common feature of all these approaches is that they are reducible to the problem of computing the solution to high-dimensional equations via a sequence of low-dimensional problems. The effectiveness of the new algorithms is demonstrated in numerical examples involving nonlinear stochastic dynamical systems and partial differential equations, with up to 120 variables.
Density functional theory study of phase IV of solid hydrogen
Pickard, Chris J.; Martinez-Canales, Miguel; Needs, Richard J.
2012-06-01
We have studied solid hydrogen up to pressures of 300 GPa and temperatures of 350 K using density functional theory methods and have found “mixed structures” that are more stable than those predicted earlier. Mixed structures consist of alternate layers of strongly bonded molecules and weakly bonded graphene-like sheets. Quasiharmonic vibrational calculations show that mixed structures are the most stable at room temperature over the pressure range 250-295 GPa. These structures are stabilized with respect to strongly bonded molecular phases at room temperature by the presence of lower frequency vibrational modes arising from the graphene-like sheets. Our results for the mixed structures are consistent with the experimental Raman data [M. I. Eremets and I. A. Troyan, Nat. Mater.1476-112210.1038/nmat3175 10, 927 (2011) and R. T. Howie , Phys. Rev. Lett.PRLTAO0031-900710.1103/PhysRevLett.108.125501 108, 125501 (2012)]. We find that mixed phases are reasonable structural models for phase IV of hydrogen.
Chiroptical Properties of Amino Acids: A Density Functional Theory Study
Martine Adrian-Scotto
2010-04-01
Full Text Available Amino acids are involved in many scientific theories elucidating possible origins of life on Earth. One of the challenges when discussing the evolutionary origin of biopolymers such as proteins and oligonucleotides in living organisms is the phenomenon that these polymers implement monomers of exclusively one handedness, a feature called biomolecular homochirality. Many attempts have been made to understand this process of racemic symmetry breaking. Assuming an extraterrestrial origin of the molecular building blocks of living organisms, their susceptibility to asymmetric photolysis by the absorption of circularly polarized electromagnetic radiation in interstellar space was proposed. In order to predict whether the interaction of circularly polarized light with various racemic amino acids can induce an enantiomeric excess, we investigated the electronic and chiroptical properties of the amino acids valine and isovaline by a molecular modelling approach based on quantum chemistry (Density Functional Theory. The average spectra of both L-valine and L-isovaline have been produced on the basis of Boltzmann population analysis using computed spectra for the various conformations of each amino acid.
Semilocal exchange hole with an application to range-separated density functionals
Tao, Jianmin; Bulik, Ireneusz W.; Scuseria, Gustavo E.
2017-03-01
The exchange-correlation hole is a central concept in density functional theory. It not only provides justification for an exchange-correlation energy functional but also serves as a local ingredient for nonlocal range-separated density functionals. However, due to the nonlocal nature, modeling the conventional exact exchange hole presents a great challenge to density functional theory. In this work, we propose a semilocal exchange hole underlying the Tao-Perdew-Staroverov-Scuseria (TPSS) meta-generalized gradient approximation functional. Our model is distinct from previous ones not only at small separation between an electron and the hole around the electron but also in the way it interpolates between rapidly varying and slowly varying densities. Here the interpolation is determined by the wave-vector analysis on the infinite-barrier model for a jellium surface. Numerical tests show that our exchange-hole model mimics the conventional exact one quite well for atoms. As a simple application, we apply the hole model to construct a TPSS-based range-separated functional. We find that this range-separated functional can substantially improve the band gaps and barrier heights of TPSS, without losing much accuracy for atomization energies.
L.S. Ferreira
2016-02-01
Full Text Available Proton radioactivity from deformed nuclei is described for the first time by a self-consistent calculation based on covariant relativistic density functionals derived from meson exchange and point coupling models. The calculation provides an important new test to these interactions at the limits of stability, since the mixing of different angular momenta in the single particle wave functions is probed.
Ferreira, L.S., E-mail: flidia@tecnico.ulisboa.pt [Center of Physics and Engineering of Advanced Materials, CeFEMA, and Departamento de Física, Instituto Superior Técnico, Universidade de Lisboa, Avenida Rovisco Pais, P1049-001 Lisbon (Portugal); Maglione, E. [Dipartimento di Fisica e Astronomia “G. Galilei”, Via Marzolo 8, I-35131 Padova (Italy); Istituto Nazionale di Fisica Nucleare, Padova (Italy); Ring, P. [Physik Department der Technischen Universität München, D-85748 Garching (Germany)
2016-02-10
Proton radioactivity from deformed nuclei is described for the first time by a self-consistent calculation based on covariant relativistic density functionals derived from meson exchange and point coupling models. The calculation provides an important new test to these interactions at the limits of stability, since the mixing of different angular momenta in the single particle wave functions is probed.
Lei, Youming; Zheng, Fan
2016-12-01
Stochastic chaos induced by diffusion processes, with identical spectral density but different probability density functions (PDFs), is investigated in selected lightly damped Hamiltonian systems. The threshold amplitude of diffusion processes for the onset of chaos is derived by using the stochastic Melnikov method together with a mean-square criterion. Two quasi-Hamiltonian systems, namely, a damped single pendulum and damped Duffing oscillator perturbed by stochastic excitations, are used as illustrative examples. Four different cases of stochastic processes are taking as the driving excitations. It is shown that in such two systems the spectral density of diffusion processes completely determines the threshold amplitude for chaos, regardless of the shape of their PDFs, Gaussian or otherwise. Furthermore, the mean top Lyapunov exponent is employed to verify analytical results. The results obtained by numerical simulations are in accordance with the analytical results. This demonstrates that the stochastic Melnikov method is effective in predicting the onset of chaos in the quasi-Hamiltonian systems.
Lei, Youming; Zheng, Fan
2016-12-01
Stochastic chaos induced by diffusion processes, with identical spectral density but different probability density functions (PDFs), is investigated in selected lightly damped Hamiltonian systems. The threshold amplitude of diffusion processes for the onset of chaos is derived by using the stochastic Melnikov method together with a mean-square criterion. Two quasi-Hamiltonian systems, namely, a damped single pendulum and damped Duffing oscillator perturbed by stochastic excitations, are used as illustrative examples. Four different cases of stochastic processes are taking as the driving excitations. It is shown that in such two systems the spectral density of diffusion processes completely determines the threshold amplitude for chaos, regardless of the shape of their PDFs, Gaussian or otherwise. Furthermore, the mean top Lyapunov exponent is employed to verify analytical results. The results obtained by numerical simulations are in accordance with the analytical results. This demonstrates that the stochastic Melnikov method is effective in predicting the onset of chaos in the quasi-Hamiltonian systems.
Particle vibrational coupling in covariant density functional theory
Ring, P; 10.1134/S1063778809080055
2009-01-01
A consistent combination of covariant density functional theory (CDFT) and Landau-Migdal Theory of Finite Fermi Systems (TFFS) is presented. Both methods are in principle exact, but Landau-Migdal theory cannot describe ground state properties and density functional theory does not take into account the energy dependence of the self-energy and therefore fails to yield proper single-% particle spectra as well as the coupling to complex configurations in the width of giant resonances. Starting from an energy functional, phonons and their vertices are calculated without any further parameters. They form the basis of particle-vibrational coupling leading to an energy dependence of the self-energy and an induced energy-dependent interaction in the response equation. A subtraction procedure avoids double counting. Applications in doubly magic nuclei and in a chain of superfluid nuclei show excellent agreement with experimental data.
Spin projection with double hybrid density functional theory.
Thompson, Lee M; Hratchian, Hrant P
2014-07-21
A spin projected double-hybrid density functional theory is presented that accounts for different scaling of opposite and same spin terms in the second order correction. This method is applied to three dissociation reactions which in the unprojected formalism exhibit significant spin contamination with higher spin states. This gives rise to a distorted potential surface and can lead to poor geometries and energies. The projected method presented is shown to improve the description of the potential over unprojected double hybrid density functional theory. Comparison is made with the reference states of the two double hybrid functionals considered here (B2PLYP and mPW2PLYP) in which the projected potential surface is degraded by an imbalance in the description of dynamic and static correlation.
A density functional for liquid [sup 3]He
Barranco, M. (Dept. de Estructura y Constituyentes de la Materia, Barcelona Univ. (Spain)); Jezek, D.M. (Dept. de Estructura y Constituyentes de la Materia, Barcelona Univ. (Spain)); Hernandez, E.S. (Dept. de Fisica, Univ. de Buenos Aires (Argentina)); Navarro, J. (Dept. de Fisica Atomica, Molecular y Nuclear, Valencia Univ. (Spain)); Serra, Ll. (Dipt. di Fisica, Milan Univ. (Italy))
1993-11-01
We present a density functional for the description of liquid [sup 3]He properties at zero temperture in a mean field approximation. Its basic ingredients are a zero-range, particle- and spin-density dependent effective interaction of Skyrme type, and a long-range effective interaction of Lennard-Jones type supplemented with a weighted density approximation similar to the one used in the study of classical fluids, to phenomenologically account for short range correlations. After fixing the value of its parameters, the functional yields a good desription of the equation of state and Landau parameters (spin symmetric and spin antisymmetric as well) from saturation to solidification densities. The zero sound propagation at finite momentum transfer is quantitatively reproduced up to the Fermi momentum, and qualitatively above it. The surface tension is in agreement with experiment, which makes the functional well suited for [sup 3]He drop calculations. We describe the structure of drops made of up to 516 atoms. As a novel application, we discuss the possible appearance of triplet pairing in a nl-shell of a drop applying the formalism to the 1j-shell holding up to 30 atoms from N=169 to 198. (orig.)
Relations among several nuclear and electronic density functional reactivity indexes
Torrent-Sucarrat, Miquel; Luis, Josep M.; Duran, Miquel; Toro-Labbé, Alejandro; Solà, Miquel
2003-11-01
An expansion of the energy functional in terms of the total number of electrons and the normal coordinates within the canonical ensemble is presented. A comparison of this expansion with the expansion of the energy in terms of the total number of electrons and the external potential leads to new relations among common density functional reactivity descriptors. The formulas obtained provide explicit links between important quantities related to the chemical reactivity of a system. In particular, the relation between the nuclear and the electronic Fukui functions is recovered. The connection between the derivatives of the electronic energy and the nuclear repulsion energy with respect to the external potential offers a proof for the "Quantum Chemical le Chatelier Principle." Finally, the nuclear linear response function is defined and the relation of this function with the electronic linear response function is given.
Non-Local Density Functional Description of Poly-Para-Phenylene Vinylene
ZHENG Guang; Clark S. J.; Brand S.; Abram R. A.
2007-01-01
A fully non-local exchange-correlation formalism within the framework of density functional theory, known as the weighted density approximation (WDA), has been applied to the conjugated polymer poly-para-phenylene vinylene (PPV) and is shown to lead to a marked improvement in the agreement of theory and experiment for the electronic band structure of the conjugated polymer. In particular, some new model WDA functions are developed, which substantially increase the electronic band gap of the polymer relative to those obtained with the local density approximation and generalized gradient approximation. The calculated band gap of PPV is quantitatively or at 1east semiquantitatively in agreement with the experimental data.
Recent advances in density functional methods, pt. 1-2
Chong, Delano P
1995-01-01
Of all the different areas in computational chemistry, density functional theory (DFT) enjoys the most rapid development. Even at the level of the local density approximation (LDA), which is computationally less demanding, DFT can usually provide better answers than Hartree-Fock formalism for large systems such as clusters and solids. For atoms and molecules, the results from DFT often rival those obtained by ab initio quantum chemistry, partly because larger basis sets can be used. Such encouraging results have in turn stimulated workers to further investigate the formal theory as well as the
Multiphase aluminum equations of state via density functional theory
Sjostrom, Travis; Crockett, Scott; Rudin, Sven
2016-10-01
We have performed density functional theory (DFT) based calculations for aluminum in extreme conditions of both pressure and temperature, up to five times compressed ambient density, and over 1 000 000 K in temperature. In order to cover such a domain, DFT methods including phonon calculations, quantum molecular dynamics, and orbital-free DFT are employed. The results are then used to construct a SESAME equation of state for the aluminum 1100 alloy, encompassing the fcc, hcp, and bcc solid phases as well as the liquid regime. We provide extensive comparison with experiment, and based on this we also provide a slightly modified equation of state for the aluminum 6061 alloy.
Density Functional Theory Studies of Magnetically Confined Fermi Gas
陈宇俊; 马红孺
2001-01-01
A theory is developed for magnetically confined Fermi gas at a low temperature based on the density functional theory. The theory is illustrated by the numerical calculation of the density distributions of Fermi atoms 40K with parameters according to DeMarco and Jin's experiment [Science, 285(1999)1703]. Our results are in close agreement with the experiment. To check the theory, we also performed calculations using our theory at a high temperature, which compared very well to the results of the classical limit.
Perspective: Fundamental aspects of time-dependent density functional theory
Maitra, Neepa T.
2016-06-01
In the thirty-two years since the birth of the foundational theorems, time-dependent density functional theory has had a tremendous impact on calculations of electronic spectra and dynamics in chemistry, biology, solid-state physics, and materials science. Alongside the wide-ranging applications, there has been much progress in understanding fundamental aspects of the functionals and the theory itself. This Perspective looks back to some of these developments, reports on some recent progress and current challenges for functionals, and speculates on future directions to improve the accuracy of approximations used in this relatively young theory.
Density-functional formula for strongly correlated systems
WANG Huaiyu; HAN Rushan; CHEN Nanxian
2005-01-01
Density functional method is applied for strongly correlated systems. Based on the assumption that the systems are composed of electrons in singly-occupied orbitals and those in doubly-occupied orbitals, a set of self-consistent equations are obtained by standard variation procedure. The equations consist of two parts. One part is to solve the wave functions of the electrons in singly-occupied orbitals and the other is to solve the wave functions of the electrons in doubly-occupied orbitals. The physical meanings of the terms appearing in the equations are discussed.
Dispersion corrections to density functionals for water aromatic interactions.
Zimmerli, Urs; Parrinello, Michele; Koumoutsakos, Petros
2004-02-08
We investigate recently published methods for extending density functional theory to the description of long-range dispersive interactions. In all schemes an empirical correction consisting of a C6r(-6) term is introduced that is damped at short range. The coefficient C6 is calculated either from average molecular or atomic polarizabilities. We calculate geometry-dependent interaction energy profiles for the water benzene cluster and compare the results with second-order Møller-Plesset calculations. Our results indicate that the use of the B3LYP functional in combination with an appropriate mixing rule and damping function is recommended for the interaction of water with aromatics.
Laplacian-level density functionals for the kinetic energy density and exchange-correlation energy
Perdew, John P.; Constantin, Lucian A.
2007-04-01
We construct a Laplacian-level meta-generalized-gradient-approximation (meta-GGA) for the noninteracting (Kohn-Sham orbital) positive kinetic energy density τ of an electronic ground state of density n . This meta-GGA is designed to recover the fourth-order gradient expansion τGE4 in the appropriate slowly varying limit and the von Weizsäcker expression τW=∣∇n∣2/(8n) in the rapidly varying limit. It is constrained to satisfy the rigorous lower bound τW(r)⩽τ(r) . Our meta-GGA is typically a strong improvement over the gradient expansion of τ for atoms, spherical jellium clusters, jellium surfaces, the Airy gas, Hooke’s atom, one-electron Gaussian density, quasi-two-dimensional electron gas, and nonuniformly scaled hydrogen atom. We also construct a Laplacian-level meta-GGA for exchange and correlation by employing our approximate τ in the Tao-Perdew-Staroverov-Scuseria (TPSS) meta-GGA density functional. The Laplacian-level TPSS gives almost the same exchange-correlation enhancement factors and energies as the full TPSS, suggesting that τ and ∇2n carry about the same information beyond that carried by n and ∇n . Our kinetic energy density integrates to an orbital-free kinetic energy functional that is about as accurate as the fourth-order gradient expansion for many real densities (with noticeable improvement in molecular atomization energies), but considerably more accurate for rapidly varying ones.
Reduced density matrix functional theory at finite temperature
Baldsiefen, Tim
2012-10-15
Density functional theory (DFT) is highly successful in many fields of research. There are, however, areas in which its performance is rather limited. An important example is the description of thermodynamical variables of a quantum system in thermodynamical equilibrium. Although the finite-temperature version of DFT (FT-DFT) rests on a firm theoretical basis and is only one year younger than its brother, groundstate DFT, it has been successfully applied to only a few problems. Because FT-DFT, like DFT, is in principle exact, these shortcomings can be attributed to the difficulties of deriving valuable functionals for FT-DFT. In this thesis, we are going to present an alternative theoretical description of quantum systems in thermal equilibrium. It is based on the 1-reduced density matrix (1RDM) of the system, rather than on its density and will rather cumbersomly be called finite-temperature reduced density matrix functional theory (FT-RDMFT). Its zero-temperature counterpart (RDMFT) proved to be successful in several fields, formerly difficult to address via DFT. These fields include, for example, the calculation of dissociation energies or the calculation of the fundamental gap, also for Mott insulators. This success is mainly due to the fact that the 1RDM carries more directly accessible ''manybody'' information than the density alone, leading for example to an exact description of the kinetic energy functional. This sparks the hope that a description of thermodynamical systems employing the 1RDM via FT-RDMFT can yield an improvement over FT-DFT. Giving a short review of RDMFT and pointing out difficulties when describing spin-polarized systems initiates our work. We then lay the theoretical framework for FT-RDMFT by proving the required Hohenberg-Kohn-like theorems, investigating and determining the domain of FT-RDMFT functionals and by deriving several properties of the exact functional. Subsequently, we present a perturbative method to
Accurate Semilocal Density Functional for Condensed-Matter Physics and Quantum Chemistry.
Tao, Jianmin; Mo, Yuxiang
2016-08-12
Most density functionals have been developed by imposing the known exact constraints on the exchange-correlation energy, or by a fit to a set of properties of selected systems, or by both. However, accurate modeling of the conventional exchange hole presents a great challenge, due to the delocalization of the hole. Making use of the property that the hole can be made localized under a general coordinate transformation, here we derive an exchange hole from the density matrix expansion, while the correlation part is obtained by imposing the low-density limit constraint. From the hole, a semilocal exchange-correlation functional is calculated. Our comprehensive test shows that this functional can achieve remarkable accuracy for diverse properties of molecules, solids, and solid surfaces, substantially improving upon the nonempirical functionals proposed in recent years. Accurate semilocal functionals based on their associated holes are physically appealing and practically useful for developing nonlocal functionals.
Accurate Semilocal Density Functional for Condensed-Matter Physics and Quantum Chemistry
Tao, Jianmin; Mo, Yuxiang
2016-08-01
Most density functionals have been developed by imposing the known exact constraints on the exchange-correlation energy, or by a fit to a set of properties of selected systems, or by both. However, accurate modeling of the conventional exchange hole presents a great challenge, due to the delocalization of the hole. Making use of the property that the hole can be made localized under a general coordinate transformation, here we derive an exchange hole from the density matrix expansion, while the correlation part is obtained by imposing the low-density limit constraint. From the hole, a semilocal exchange-correlation functional is calculated. Our comprehensive test shows that this functional can achieve remarkable accuracy for diverse properties of molecules, solids, and solid surfaces, substantially improving upon the nonempirical functionals proposed in recent years. Accurate semilocal functionals based on their associated holes are physically appealing and practically useful for developing nonlocal functionals.
Assumed Probability Density Functions for Shallow and Deep Convection
Steven K Krueger
2010-10-01
Full Text Available The assumed joint probability density function (PDF between vertical velocity and conserved temperature and total water scalars has been suggested to be a relatively computationally inexpensive and unified subgrid-scale (SGS parameterization for boundary layer clouds and turbulent moments. This paper analyzes the performance of five families of PDFs using large-eddy simulations of deep convection, shallow convection, and a transition from stratocumulus to trade wind cumulus. Three of the PDF families are based on the double Gaussian form and the remaining two are the single Gaussian and a Double Delta Function (analogous to a mass flux model. The assumed PDF method is tested for grid sizes as small as 0.4 km to as large as 204.8 km. In addition, studies are performed for PDF sensitivity to errors in the input moments and for how well the PDFs diagnose some higher-order moments. In general, the double Gaussian PDFs more accurately represent SGS cloud structure and turbulence moments in the boundary layer compared to the single Gaussian and Double Delta Function PDFs for the range of grid sizes tested. This is especially true for small SGS cloud fractions. While the most complex PDF, Lewellen-Yoh, better represents shallow convective cloud properties (cloud fraction and liquid water mixing ratio compared to the less complex Analytic Double Gaussian 1 PDF, there appears to be no advantage in implementing Lewellen-Yoh for deep convection. However, the Analytic Double Gaussian 1 PDF better represents the liquid water flux, is less sensitive to errors in the input moments, and diagnoses higher order moments more accurately. Between the Lewellen-Yoh and Analytic Double Gaussian 1 PDFs, it appears that neither family is distinctly better at representing cloudy layers. However, due to the reduced computational cost and fairly robust results, it appears that the Analytic Double Gaussian 1 PDF could be an ideal family for SGS cloud and turbulence
Szirmai, Jen\\Ho
2011-01-01
The aim of this paper to determine the locally densest horoball packing arrangements and their densities with respect to fully asymptotic tetrahedra with at least one plane of symmetry in hyperbolic 3-space $\\bar{\\mathbf{H}}^3$ extended with its absolute figure, where the ideal centers of horoballs give rise to vertices of a fully asymptotic tetrahedron. We allow horoballs of different types at the various vertices. Moreover, we generalize the notion of the simplicial density function in the extended hyperbolic space $\\bar{\\mathbf{H}}^n, ~(n \\ge 2)$, and prove that, in this sense, {\\it the well known B\\"or\\"oczky--Florian density upper bound for "congruent horoball" packings of $\\bar{\\mathbf{H}}^3$ does not remain valid to the fully asymptotic tetrahedra.} The density of this locally densest packing is $\\approx 0.874994$, may be surprisingly larger than the B\\"or\\"oczky--Florian density upper bound $\\approx 0.853276$ but our local ball arrangement seems not to have extension to the whole hyperbolic space.
A new density model of Cryptomeria fortunei plantation
Jiang Xidian; Huang Langzeng; Chen Baohui
2006-01-01
According to the volume increase model of an average individual tree in a plant population and the theory of invariable final output,we put forward a new density model of plant population: V-β=ANβ+B.Here N means the stand density and V stands for average individual tree volume;A,B and β are parameters that change with growth stage.Using the density variation of standard plots of Cryptromeriafortunei plantation to verify the new model,it turns out that this model can well simulate the population density effect law of C.fortunei plantation,and it is markedly better and shows higher accuracy than the commonly used reciprocal model of density effect and secondary-effect model.Let β=1,we can obtain the reciprocal model of density effect,which means the reciprocal model of density effect is only a special case of this new model.
Velders, G.J.M.; Feil, D.
1989-01-01
Quantum-chemical density-functional theory (DFT) calculations, using the local-density approximation (LDA), have been performed for hydrogen-bounded silicon clusters to determine the electron density distribution of the Si-Si bond. The density distribution in the bonding region is compared with calc
Informing saccharide structural NMR studies with density functional theory calculations.
Klepach, Thomas; Zhao, Hongqiu; Hu, Xiaosong; Zhang, Wenhui; Stenutz, Roland; Hadad, Matthew J; Carmichael, Ian; Serianni, Anthony S
2015-01-01
Density functional theory (DFT) is a powerful computational tool to enable structural interpretations of NMR spin-spin coupling constants ( J-couplings) in saccharides, including the abundant (1)H-(1)H ( JHH), (13)C-(1)H ( JCH), and (13)C-(13)C ( JCC) values that exist for coupling pathways comprised of 1-4 bonds. The multiple hydroxyl groups in saccharides, with their attendant lone-pair orbitals, exert significant effects on J-couplings that can be difficult to decipher and quantify without input from theory. Oxygen substituent effects are configurational and conformational in origin (e.g., axial/equatorial orientation of an OH group in an aldopyranosyl ring; C-O bond conformation involving an exocyclic OH group). DFT studies shed light on these effects, and if conducted properly, yield quantitative relationships between a specific J-coupling and one or more conformational elements in the target molecule. These relationships assist studies of saccharide structure and conformation in solution, which are often challenged by the presence of conformational averaging. Redundant J-couplings, defined as an ensemble of J-couplings sensitive to the same conformational element, are particularly helpful when the element is flexible in solution (i.e., samples multiple conformational states on the NMR time scale), provided that algorithms are available to convert redundant J-values into meaningful conformational models. If the latter conversion is achievable, the data can serve as a means of testing, validating, and refining theoretical methods like molecular dynamics (MD) simulations, which are currently relied upon heavily to assign conformational models of saccharides in solution despite a paucity of experimental data needed to independently validate the method.
The force distribution probability function for simple fluids by density functional theory.
Rickayzen, G; Heyes, D M
2013-02-28
Classical density functional theory (DFT) is used to derive a formula for the probability density distribution function, P(F), and probability distribution function, W(F), for simple fluids, where F is the net force on a particle. The final formula for P(F) ∝ exp(-AF(2)), where A depends on the fluid density, the temperature, and the Fourier transform of the pair potential. The form of the DFT theory used is only applicable to bounded potential fluids. When combined with the hypernetted chain closure of the Ornstein-Zernike equation, the DFT theory for W(F) agrees with molecular dynamics computer simulations for the Gaussian and bounded soft sphere at high density. The Gaussian form for P(F) is still accurate at lower densities (but not too low density) for the two potentials, but with a smaller value for the constant, A, than that predicted by the DFT theory.
Oeiras, R. Y.; da Silva, E. Z.
2014-04-01
Carbon linear atomic chains attached to graphene have experimentally been produced. Motivated by these results, we study the nature of the carbon bonds in these nanowires and how it affects their electrical properties. In the present study we investigate chains with different numbers of atoms and we observe that nanowires with odd number of atoms present a distinct behavior than the ones with even numbers. Using graphene nanoribbons as leads, we identify differences in the quantum transport of the chains with the consequence that even and odd numbered chains have low and high electrical conduction, respectively. We also noted a dependence of current with the wire size. We study this unexpected behavior using a combination of first principles calculations and simple models based on chemical bond theory. From our studies, the electrons of carbon nanowires present a quasi-free electron behavior and this explains qualitatively the high electrical conduction and the bond lengths with unexpected values for the case of odd nanowires. Our study also allows the understanding of the electric conduction dependence with the number of atoms and their parity in the chain. In the case of odd number chains a proposed π-bond (MpB) model describes unsaturated carbons that introduce a mobile π-bond that changes dramatically the structure and transport properties of these wires. Our results indicate that the nature of bonds plays the main role in the oscillation of quantum electrical conduction for chains with even and odd number of atoms and also that nanowires bonded to graphene nanoribbons behave as a quasi-free electron system, suggesting that this behavior is general and it could also remain if the chains are bonded to other materials.
Oeiras, R. Y.; Silva, E. Z. da [Institute of Physics “Gleb Wataghin”, University of Campinas-Unicamp, 13083-859 Campinas, SP (Brazil)
2014-04-07
Carbon linear atomic chains attached to graphene have experimentally been produced. Motivated by these results, we study the nature of the carbon bonds in these nanowires and how it affects their electrical properties. In the present study we investigate chains with different numbers of atoms and we observe that nanowires with odd number of atoms present a distinct behavior than the ones with even numbers. Using graphene nanoribbons as leads, we identify differences in the quantum transport of the chains with the consequence that even and odd numbered chains have low and high electrical conduction, respectively. We also noted a dependence of current with the wire size. We study this unexpected behavior using a combination of first principles calculations and simple models based on chemical bond theory. From our studies, the electrons of carbon nanowires present a quasi-free electron behavior and this explains qualitatively the high electrical conduction and the bond lengths with unexpected values for the case of odd nanowires. Our study also allows the understanding of the electric conduction dependence with the number of atoms and their parity in the chain. In the case of odd number chains a proposed π-bond (MpB) model describes unsaturated carbons that introduce a mobile π-bond that changes dramatically the structure and transport properties of these wires. Our results indicate that the nature of bonds plays the main role in the oscillation of quantum electrical conduction for chains with even and odd number of atoms and also that nanowires bonded to graphene nanoribbons behave as a quasi-free electron system, suggesting that this behavior is general and it could also remain if the chains are bonded to other materials.
Mihai V. Putz
2009-11-01
Full Text Available The density matrix theory, the ancestor of density functional theory, provides the immediate framework for Path Integral (PI development, allowing the canonical density be extended for the many-electronic systems through the density functional closure relationship. Yet, the use of path integral formalism for electronic density prescription presents several advantages: assures the inner quantum mechanical description of the system by parameterized paths; averages the quantum fluctuations; behaves as the propagator for time-space evolution of quantum information; resembles Schrödinger equation; allows quantum statistical description of the system through partition function computing. In this framework, four levels of path integral formalism were presented: the Feynman quantum mechanical, the semiclassical, the Feynman-Kleinert effective classical, and the Fokker-Planck non-equilibrium ones. In each case the density matrix or/and the canonical density were rigorously defined and presented. The practical specializations for quantum free and harmonic motions, for statistical high and low temperature limits, the smearing justification for the Bohr’s quantum stability postulate with the paradigmatic Hydrogen atomic excursion, along the quantum chemical calculation of semiclassical electronegativity and hardness, of chemical action and Mulliken electronegativity, as well as by the Markovian generalizations of Becke-Edgecombe electronic focalization functions – all advocate for the reliability of assuming PI formalism of quantum mechanics as a versatile one, suited for analytically and/or computationally modeling of a variety of fundamental physical and chemical reactivity concepts characterizing the (density driving many-electronic systems.
Differentiable but exact formulation of density-functional theory
Kvaal, Simen; Teale, Andrew M; Helgaker, Trygve
2013-01-01
The universal density functional $F$ of density-functional theory is a complicated and ill-behaved function of the density--in particular, $F$ is not differentiable, making many formal manipulations more complicated. Whilst $F$ has been well characterized in terms of convex analysis as forming a conjugate pair $(F,E)$ with the ground-state energy $E$ via the Hohenberg-Kohn and Lieb variation principles, $F$ is only subdifferentiable on a small (but dense) set of its domain. In this article, we apply a tool from convex analysis, Moreau-Yosida regularization, to construct, for any $\\epsilon>0$, pairs of conjugate functionals $({}^\\epsilon\\!E,{}^\\epsilon\\! F)$ that converge to $(E,F)$ pointwise everywhere as $\\epsilon\\rightarrow 0^+$, and such that ${}^\\epsilon\\!F$ is (Fr\\'echet) differentiable. For technical reasons, we limit our attention to molecular electronic systems in a finite but large box, which does not change the physics. It is noteworthy that no information is lost in the Moreau-Yosida regularization...
Differentiable but exact formulation of density-functional theory.
Kvaal, Simen; Ekström, Ulf; Teale, Andrew M; Helgaker, Trygve
2014-05-14
The universal density functional F of density-functional theory is a complicated and ill-behaved function of the density-in particular, F is not differentiable, making many formal manipulations more complicated. While F has been well characterized in terms of convex analysis as forming a conjugate pair (E, F) with the ground-state energy E via the Hohenberg-Kohn and Lieb variation principles, F is nondifferentiable and subdifferentiable only on a small (but dense) subset of its domain. In this article, we apply a tool from convex analysis, Moreau-Yosida regularization, to construct, for any ε > 0, pairs of conjugate functionals ((ε)E, (ε)F) that converge to (E, F) pointwise everywhere as ε → 0(+), and such that (ε)F is (Fréchet) differentiable. For technical reasons, we limit our attention to molecular electronic systems in a finite but large box. It is noteworthy that no information is lost in the Moreau-Yosida regularization: the physical ground-state energy E(v) is exactly recoverable from the regularized ground-state energy (ε)E(v) in a simple way. All concepts and results pertaining to the original (E, F) pair have direct counterparts in results for ((ε)E, (ε)F). The Moreau-Yosida regularization therefore allows for an exact, differentiable formulation of density-functional theory. In particular, taking advantage of the differentiability of (ε)F, a rigorous formulation of Kohn-Sham theory is presented that does not suffer from the noninteracting representability problem in standard Kohn-Sham theory.
Time-dependent density-functional theory for extended systems
Botti, Silvana [European Theoretical Spectroscopy Facility (ETSF) (Country Unknown); Schindlmayr, Arno [European Theoretical Spectroscopy Facility (ETSF) (Country Unknown); Del Sole, Rodolfo [European Theoretical Spectroscopy Facility (ETSF) (Country Unknown); Reining, Lucia [European Theoretical Spectroscopy Facility (ETSF) (Country Unknown)
2007-03-15
For the calculation of neutral excitations, time-dependent density functional theory (TDDFT) is an exact reformulation of the many-body time-dependent Schroedinger equation, based on knowledge of the density instead of the many-body wavefunction. The density can be determined in an efficient scheme by solving one-particle non-interacting Schroedinger equations-the Kohn-Sham equations. The complication of the problem is hidden in the-unknown-time-dependent exchange and correlation potential that appears in the Kohn-Sham equations and for which it is essential to find good approximations. Many approximations have been suggested and tested for finite systems, where even the very simple adiabatic local-density approximation (ALDA) has often proved to be successful. In the case of solids, ALDA fails to reproduce optical absorption spectra, which are instead well described by solving the Bethe-Salpeter equation of many-body perturbation theory (MBPT). On the other hand, ALDA can lead to excellent results for loss functions (at vanishing and finite momentum transfer). In view of this and thanks to recent successful developments of improved linear-response kernels derived from MBPT, TDDFT is today considered a promising alternative to MBPT for the calculation of electronic spectra, even for solids. After reviewing the fundamentals of TDDFT within linear response, we discuss different approaches and a variety of applications to extended systems.
What Density Functional Theory could do for Quantum Information
Mattsson, Ann
2015-03-01
The Hohenberg-Kohn theorem of Density Functional Theory (DFT), and extensions thereof, tells us that all properties of a system of electrons can be determined through their density, which uniquely determines the many-body wave-function. Given access to the appropriate, universal, functionals of the density we would, in theory, be able to determine all observables of any electronic system, without explicit reference to the wave-function. On the other hand, the wave-function is at the core of Quantum Information (QI), with the wave-function of a set of qubits being the central computational resource in a quantum computer. While there is seemingly little overlap between DFT and QI, reliance upon observables form a key connection. Though the time-evolution of the wave-function and associated phase information is fundamental to quantum computation, the initial and final states of a quantum computer are characterized by observables of the system. While observables can be extracted directly from a system's wave-function, DFT tells us that we may be able to intuit a method for extracting them from its density. In this talk, I will review the fundamentals of DFT and how these principles connect to the world of QI. This will range from DFT's utility in the engineering of physical qubits, to the possibility of using it to efficiently (but approximately) simulate Hamiltonians at the logical level. The apparent paradox of describing algorithms based on the quantum mechanical many-body wave-function with a DFT-like theory based on observables will remain a focus throughout. The ultimate goal of this talk is to initiate a dialog about what DFT could do for QI, in theory and in practice. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.
The neutron polaron as a constraint on nuclear density functionals
Forbes, M M; Hebeler, K; Lesinski, T; Schwenk, A
2013-01-01
We study the energy of an impurity that interacts strongly in a sea of fermions when the effective range of the impurity-fermion interaction becomes important. This directly maps the Fermi polaron of condensed matter physics and ultracold atoms to strongly interacting neutrons. We present first Quantum Monte Carlo results for the neutron polaron and compare these with calculations based on effective field theory that also include contributions beyond effective-range effects. We show that predictions of state-of-the-art nuclear density functionals vary substantially and generally underestimate the neutron polaron energy. Our results thus provide a novel constraint for nuclear density functionals, in particular for the time-odd components.
Excitations and benchmark ensemble density functional theory for two electrons
Pribram-Jones, Aurora; Trail, John R; Burke, Kieron; Needs, Richard J; Ullrich, Carsten A
2014-01-01
A new method for extracting ensemble Kohn-Sham potentials from accurate excited state densities is applied to a variety of two electron systems, exploring the behavior of exact ensemble density functional theory. The issue of separating the Hartree energy and the choice of degenerate eigenstates is explored. A new approximation, spin eigenstate Hartree-exchange (SEHX), is derived. Exact conditions that are proven include the signs of the correlation energy components, the virial theorem for both exchange and correlation, and the asymptotic behavior of the potential for small weights of the excited states. Many energy components are given as a function of the weights for two electrons in a one-dimensional flat box, in a box with a large barrier to create charge transfer excitations, in a three-dimensional harmonic well (Hooke's atom), and for the He atom singlet-triplet ensemble, singlet-triplet-singlet ensemble, and triplet bi-ensemble.
Excitations and benchmark ensemble density functional theory for two electrons
Pribram-Jones, Aurora; Burke, Kieron [Department of Chemistry, University of California-Irvine, Irvine, California 92697 (United States); Yang, Zeng-hui; Ullrich, Carsten A. [Department of Physics and Astronomy, University of Missouri, Columbia, Missouri 65211 (United States); Trail, John R.; Needs, Richard J. [Theory of Condensed Matter Group, Cavendish Laboratory, University of Cambridge, Cambridge CB3 0HE (United Kingdom)
2014-05-14
A new method for extracting ensemble Kohn-Sham potentials from accurate excited state densities is applied to a variety of two-electron systems, exploring the behavior of exact ensemble density functional theory. The issue of separating the Hartree energy and the choice of degenerate eigenstates is explored. A new approximation, spin eigenstate Hartree-exchange, is derived. Exact conditions that are proven include the signs of the correlation energy components and the asymptotic behavior of the potential for small weights of the excited states. Many energy components are given as a function of the weights for two electrons in a one-dimensional flat box, in a box with a large barrier to create charge transfer excitations, in a three-dimensional harmonic well (Hooke's atom), and for the He atom singlet-triplet ensemble, singlet-triplet-singlet ensemble, and triplet bi-ensemble.
Time-dependent density-functional description of nuclear dynamics
Nakatsukasa, Takashi; Matsuo, Masayuki; Yabana, Kazuhiro
2016-01-01
We present the basic concepts and recent developments in the time-dependent density functional theory (TDDFT) for describing nuclear dynamics at low energy. The symmetry breaking is inherent in nuclear energy density functionals (EDFs), which provides a practical description of important correlations at the ground state. Properties of elementary modes of excitation are strongly influenced by the symmetry breaking and can be studied with TDDFT. In particular, a number of recent developments in the linear response calculation have demonstrated their usefulness in description of collective modes of excitation in nuclei. Unrestricted real-time calculations have also become available in recent years, with new developments for quantitative description of nuclear collision phenomena. There are, however, limitations in the real-time approach; for instance, it cannot describe the many-body quantum tunneling. Thus, we treat the quantum fluctuations associated with slow collective motions assuming that time evolution of...
Density functional theory across chemistry, physics and biology.
van Mourik, Tanja; Bühl, Michael; Gaigeot, Marie-Pierre
2014-03-13
The past decades have seen density functional theory (DFT) evolve from a rising star in computational quantum chemistry to one of its major players. This Theme Issue, which comes half a century after the publication of the Hohenberg-Kohn theorems that laid the foundations of modern DFT, reviews progress and challenges in present-day DFT research. Rather than trying to be comprehensive, this Theme Issue attempts to give a flavour of selected aspects of DFT.
Green's function based density estimation
Kovesarki, Peter; Brock, Ian C.; Nuncio Quiroz, Adriana Elizabeth [Physikalisches Institut, Universitaet Bonn (Germany)
2012-07-01
A method was developed based on Green's function identities to estimate probability densities. This can be used for likelihood estimations and for binary classifications. It offers several advantages over neural networks, boosted decision trees and other, regression based classifiers. For example, it is less prone to overtraining, and it is much easier to combine several samples. Some capabilities are demonstrated using ATLAS data.
Reproducibility in density functional theory calculations of solids
2016-01-01
This is the author accepted manuscript.The final version is available from the American Association for the Advancement of Science via http://dx.doi.org/10.1126/science.aad3000 The widespread popularity of density-functional theory has given rise to a vast range of dedicated codes to predict molecular and crystalline properties. However, each code implements the formalism in a different way, raising questions on the reproducibility of such predictions. We report the results of a community-...
Density functional theory studies of transition metal nanoparticles in catalysis
Greeley, Jeffrey Philip; Rankin, Rees; Zeng, Zhenhua
2013-01-01
Periodic Density Functional Theory calculations are capable of providing powerful insights into the structural, energetics, and electronic phenomena that underlie heterogeneous catalysis on transition metal nanoparticles. Such calculations are now routinely applied to single crystal metal surfaces...... and to subnanometer metal clusters. Descriptions of catalysis on truly nanosized structures, however, are generally not as well developed. In this talk, I will illustrate different approaches to analyzing nanocatalytic phenomena with DFT calculations. I will describe case studies from heterogeneous catalysis...
Density functional theory study on the molecular structure of loganin
Pandey, Anoop Kumar; Siddiqui, Shamoon Ahmad; Dwivedi, Apoorva; Raj, Kanwal; Misra, Neeraj
2011-01-01
The computational Quantum Chemistry (QC) has been used for different types of problems, for example: structural biology, surface phenomena and liquid phase. In this paper we have employed the density functional method for the study of molecular structure of loganin. The equilibrium geometry, harmonic vibrational frequencies and infrared intensities were calculated by B3LYP/6-311G (d, p) method and basis set combinations. It was found that the optimized parameters obtained by the DFT/B3LYP met...
Quantum Drude friction for time-dependent density functional theory
Neuhauser, Daniel; Lopata, Kenneth
2008-10-01
Friction is a desired property in quantum dynamics as it allows for localization, prevents backscattering, and is essential in the description of multistage transfer. Practical approaches for friction generally involve memory functionals or interactions with system baths. Here, we start by requiring that a friction term will always reduce the energy of the system; we show that this is automatically true once the Hamiltonian is augmented by a term of the form ∫a(q ;n0)[∂j(q,t)/∂t]ṡJ(q)dq, which includes the current operator times the derivative of its expectation value with respect to time, times a local coefficient; the local coefficient will be fitted to experiment, to more sophisticated theories of electron-electron interaction and interaction with nuclear vibrations and the nuclear background, or alternately, will be artificially constructed to prevent backscattering of energy. We relate this term to previous results and to optimal control studies, and generalize it to further operators, i.e., any operator of the form ∫a(q ;n0)[∂c(q,t)/∂t]ṡC(q)dq (or a discrete sum) will yield friction. Simulations of a small jellium cluster, both in the linear and highly nonlinear excitation regime, demonstrate that the friction always reduces energy. The energy damping is essentially double exponential; the long-time decay is almost an order of magnitude slower than the rapid short-time decay. The friction term stabilizes the propagation (split-operator propagator here), therefore increasing the time-step needed for convergence, i.e., reducing the overall computational cost. The local friction also allows the simulation of a metal cluster in a uniform jellium as the energy loss in the excitation due to the underlying corrugation is accounted for by the friction. We also relate the friction to models of coupling to damped harmonic oscillators, which can be used for a more sophisticated description of the coupling, and to memory functionals. Our results open the
Pagnini, Gianni; Mura, Antonio; Mainardi, Francesco
2013-05-13
Two-particle dispersion is investigated in the context of anomalous diffusion. Two different modelling approaches related to time subordination are considered and unified in the framework of self-similar stochastic processes. By assuming a single-particle fractional Brownian motion and that the two-particle correlation function decreases in time with a power law, the particle relative separation density is computed for the cases with time sub-ordination directed by a unilateral M-Wright density and by an extremal Lévy stable density. Looking for advisable mathematical properties (for instance, the stationarity of the increments), the corresponding self-similar stochastic processes are represented in terms of fractional Brownian motions with stochastic variance, whose profile is modelled by using the M-Wright density or the Lévy stable density.
Linear Scaling Density Functional Calculations with Gaussian Orbitals
Scuseria, Gustavo E.
1999-01-01
Recent advances in linear scaling algorithms that circumvent the computational bottlenecks of large-scale electronic structure simulations make it possible to carry out density functional calculations with Gaussian orbitals on molecules containing more than 1000 atoms and 15000 basis functions using current workstations and personal computers. This paper discusses the recent theoretical developments that have led to these advances and demonstrates in a series of benchmark calculations the present capabilities of state-of-the-art computational quantum chemistry programs for the prediction of molecular structure and properties.
Bayesian error estimation in density-functional theory
Mortensen, Jens Jørgen; Kaasbjerg, Kristen; Frederiksen, Søren Lund
2005-01-01
We present a practical scheme for performing error estimates for density-functional theory calculations. The approach, which is based on ideas from Bayesian statistics, involves creating an ensemble of exchange-correlation functionals by comparing with an experimental database of binding energies...... for molecules and solids. Fluctuations within the ensemble can then be used to estimate errors relative to experiment on calculated quantities such as binding energies, bond lengths, and vibrational frequencies. It is demonstrated that the error bars on energy differences may vary by orders of magnitude...
Formation energies of rutile metal dioxides using density functional theory
Martinez, Jose Ignacio; Hansen, Heine Anton; Rossmeisl, Jan
2009-01-01
We apply standard density functional theory at the generalized gradient approximation (GGA) level to study the stability of rutile metal oxides. It is well known that standard GGA exchange and correlation in some cases is not sufficient to address reduction and oxidation reactions. Especially...... and due to a more accurate description of exchange for this particular GGA functional compared to PBE. Furthermore, we would expect the self-interaction problem to be largest for the most localized d orbitals; that means the late 3d metals and since Co, Fe, Ni, and Cu do not form rutile oxides...
Time-dependent density-functional theory concepts and applications
Ullrich, Carsten A
2011-01-01
Time-dependent density-functional theory (TDDFT) describes the quantum dynamics of interacting electronic many-body systems formally exactly and in a practical and efficient manner. TDDFT has become the leading method for calculating excitation energies and optical properties of large molecules, with accuracies that rival traditional wave-function based methods, but at a fraction of the computational cost.This book is the first graduate-level text on the concepts and applications of TDDFT, including many examples and exercises, and extensive coverage of the literature. The book begins with a s
Yao, Kun
2015-01-01
We demonstrate a convolutional neural network trained to reproduce the Kohn-Sham kinetic energy of hydrocarbons from electron density. The output of the network is used as a non-local correction to the conventional local and semi-local kinetic functionals. We show that this approximation qualitatively reproduces Kohn-Sham potential energy surfaces when used with conventional exchange correlation functionals. Numerical noise inherited from the non-linearity of the neural network is identified as the major challenge for the model. Finally we examine the features in the density learned by the neural network to anticipate the prospects of generalizing these models.
Time-dependent density functional theory: Causality and other problems
Ruggenthaler, Michael; Bauer, Dieter [Max-Planck-Inst. fuer Kernphysik, Heidelberg (Germany)
2007-07-01
Time-dependent density functional theory (TDDFT) is a reformulation of the time dependent many-body problem in quantum mechanics which is capable of reducing the computational cost to calculate, e.g., strongly driven many-electron systems enormously. Recent developments were able to overcome fundamental problems associated with ionization processes. Still vital issues have to be clarified. Besides the construction of the underlying functionals we investigate the causality problem of TDDFT by general considerations and by studying a exactly solvable system of two correlated electrons in an intense laser-pulse. For the latter system, the two alternative approaches to the construction of the action functional or a constrained functional derivative by van Leeuwen and Gal, respectively, are explored.
Bresnahan, Caitlin G; Reinhardt, Clorice R; Bartholow, Thomas G; Rumpel, John P; North, Michael; Bhattacharyya, Sudeep
2015-01-08
The π-π stacking interaction between lumiflavin and a number of π-electron-rich molecules has been studied by density functional theory using several new-generation density functionals. Six known lumiflavin-aromatic adducts were used and the models were evaluated by comparing the geometry and energetics with experimental results. The study found that dispersion-corrected and hybrid functionals with larger (>50%) Hartree-Fock exchanges produced superior results in modeling thermodynamic characteristics of these complexes. The functional producing the best energetics for these model systems was used to study the stacking interactions of lumiflavin with biologically relevant aromatic groups. Additionally, the reduction of flavin-in the presence of both a hydride donor and a nondonor π-electronic system was also studied. Weak interactions were observed in the stacked lumiflavin complexes of benzene, phenol, and indole, mimicking phenyl alanine, tryptophan, and tyrosine side chains, respectively, of an enzyme. The stacked complex of naphthalene and flavin showed little change in flavin's redox potential indicating insignificant effect on the thermodynamics of the hydride transfer reaction. In contrast, the hydride transfer reaction with the hydride donor N-methyl nicotinamide tells a different story, as the transition state was found to be strongly impacted by the stacking interactions. A comparison of performance between the density functional theory (DFT) and the computationally less expensive dispersion-corrected self-consistent density functional tight-binding (SCC-DFTB-D) theory revealed that the latter produces consistent energetics for this hydride transfer reaction and additional DFT-computed perturbative corrections could significantly improve these results.
Differentiable but exact formulation of density-functional theory
Kvaal, Simen, E-mail: simen.kvaal@kjemi.uio.no; Ekström, Ulf; Helgaker, Trygve [Centre for Theoretical and Computational Chemistry, Department of Chemistry, University of Oslo, P.O. Box 1033 Blindern, N-0315 Oslo (Norway); Teale, Andrew M. [Centre for Theoretical and Computational Chemistry, Department of Chemistry, University of Oslo, P.O. Box 1033 Blindern, N-0315 Oslo (Norway); School of Chemistry, University of Nottingham, University Park, Nottingham NG7 2RD (United Kingdom)
2014-05-14
The universal density functional F of density-functional theory is a complicated and ill-behaved function of the density—in particular, F is not differentiable, making many formal manipulations more complicated. While F has been well characterized in terms of convex analysis as forming a conjugate pair (E, F) with the ground-state energy E via the Hohenberg–Kohn and Lieb variation principles, F is nondifferentiable and subdifferentiable only on a small (but dense) subset of its domain. In this article, we apply a tool from convex analysis, Moreau–Yosida regularization, to construct, for any ε > 0, pairs of conjugate functionals ({sup ε}E, {sup ε}F) that converge to (E, F) pointwise everywhere as ε → 0{sup +}, and such that {sup ε}F is (Fréchet) differentiable. For technical reasons, we limit our attention to molecular electronic systems in a finite but large box. It is noteworthy that no information is lost in the Moreau–Yosida regularization: the physical ground-state energy E(v) is exactly recoverable from the regularized ground-state energy {sup ε}E(v) in a simple way. All concepts and results pertaining to the original (E, F) pair have direct counterparts in results for ({sup ε}E, {sup ε}F). The Moreau–Yosida regularization therefore allows for an exact, differentiable formulation of density-functional theory. In particular, taking advantage of the differentiability of {sup ε}F, a rigorous formulation of Kohn–Sham theory is presented that does not suffer from the noninteracting representability problem in standard Kohn–Sham theory.
Han, Wen-Ge; Noodleman, Louis
2010-03-01
In studying the properties of metalloproteins using ab initio quantum mechanical methods, one has to focus on the calculations on the active site. The bulk protein and solvent environment is often neglected, or is treated as a continuum dielectric medium with a certain dielectric constant. The size of the quantum cluster of the active site chosen for calculations can vary by including only the first-shell ligands which are directly bound to the metal centers, or including also the second-shell residues which are adjacent to and normally have H-bonding interactions with the first-shell ligands, or by including also further hydrogen bonding residues. It is not well understood how the size of the quantum cluster and the value of the dielectric constant chosen for the calculations will influence the calculated properties. In this paper, we have studied three models (A, B, and C) of different sizes for the active site of the ribonucleotide reductase intermediate X, using density functional theory (DFT) OPBE functional with broken-symmetry methodology. Each model is studied in gas-phase and in the conductor-like screening (COSMO) solvation model with different dielectric constants ε = 4, 10, 20, and 80, respectively. All the calculated Fe-ligand geometries, Heisenberg J coupling constants, and the Mössbauer isomer shifts, quadrupole splittings, and the (57)Fe, (1)H, and (17)O hyperfine tensors are compared. We find that the calculated isomer shifts are very stable. They are virtually unchanged with respect to the size of the cluster and the dielectric constant of the environment. On the other hand, certain Fe-ligand distances are sensitive to both the size of the cluster and the value of ε. ε = 4, which is normally used for the protein environment, appears too small when studying the diiron active site geometry with only the first-shell ligands as seen by comparisons with larger models.
Propulsion Physics Under the Changing Density Field Model
Robertson, Glen A.
2011-01-01
To grow as a space faring race, future spaceflight systems will requires new propulsion physics. Specifically a propulsion physics model that does not require mass ejection without limiting the high thrust necessary to accelerate within or beyond our solar system and return within a normal work period or lifetime. In 2004 Khoury and Weltman produced a density dependent cosmology theory they called Chameleon Cosmology, as at its nature, it is hidden within known physics. This theory represents a scalar field within and about an object, even in the vacuum. Whereby, these scalar fields can be viewed as vacuum energy fields with definable densities that permeate all matter; having implications to dark matter/energy with universe acceleration properties; implying a new force mechanism for propulsion physics. Using Chameleon Cosmology, the author has developed a new propulsion physics model, called the Changing Density Field (CDF) Model. This model relates to density changes in these density fields, where the density field density changes are related to the acceleration of matter within an object. These density changes in turn change how an object couples to the surrounding density fields. Whereby, thrust is achieved by causing a differential in the coupling to these density fields about an object. Since the model indicates that the density of the density field in an object can be changed by internal mass acceleration, even without exhausting mass, the CDF model implies a new propellant-less propulsion physics model
Density-functional perturbation theory goes time-dependent
Gebauer, Ralph
2008-05-01
Full Text Available The scope of time-dependent density-functional theory (TDDFT is limited to the lowest portion of the spectrum of rather small systems (a few tens of atoms at most. In the static regime, density-functional perturbation theory (DFPT allows one to calculate response functions of systems as large as currently dealt with in ground-state simulations. In this paper we present an effective way of combining DFPT with TDDFT. The dynamical polarizability is first expressed as an off-diagonal matrix element of the resolvent of the Kohn-Sham Liouvillian super-operator. A DFPT representation of response functions allows one to avoid the calculation of unoccupied Kohn-Sham orbitals. The resolvent of the Liouvillian is finally conveniently evaluated using a newly developed non-symmetric Lanczos technique, which allows for the calculation of the entire spectrum with a single Lanczos recursion chain. Each step of the chain essentially requires twice as many operations as a single step of the iterative diagonalization of the unperturbed Kohn-Sham Hamiltonian or, for that matter, as a single time step of a Car-Parrinello molecular dynamics run. The method will be illustrated with a few case molecular applications.
An improved density matrix functional by physically motivated repulsive corrections.
Gritsenko, Oleg; Pernal, Katarzyna; Baerends, Evert Jan
2005-05-22
An improved density matrix functional [correction to Buijse and Baerends functional (BBC)] is proposed, in which a hierarchy of physically motivated repulsive corrections is employed to the strongly overbinding functional of Buijse and Baerends (BB). The first correction C1 restores the repulsive exchange-correlation (xc) interaction between electrons in weakly occupied natural orbitals (NOs) as it appears in the exact electron pair density rho(2) for the limiting two-electron case. The second correction C2 reduces the xc interaction of the BB functional between electrons in strongly occupied NOs to an exchange-type interaction. The third correction C3 employs a similar reduction for the interaction of the antibonding orbital of a dissociating molecular bond. In addition, C3 applies a selective cancellation of diagonal terms in the Coulomb and xc energies (not for the frontier orbitals). With these corrections, BBC still retains a correct description of strong nondynamical correlation for the dissociating electron pair bond. BBC greatly improves the quality of the BB potential energy curves for the prototype few-electron molecules and in several cases BBC reproduces very well the benchmark ab initio potential curves. The average error of the self-consistent correlation energies obtained with BBC3 for prototype atomic systems and molecular systems at the equilibrium geometry is only ca. 6%.
Stochastic Time-Dependent Current-Density Functional Theory
D'Agosta, Roberto
2008-03-01
Static and dynamical density functional methods have been applied with a certain degree of success to a variety of closed quantum mechanical systems, i.e., systems that can be described via a Hamiltonian dynamics. However, the relevance of open quantum systems - those coupled to external environments, e.g., baths or reservoirs - cannot be overestimated. To investigate open quantum systems with DFT methods we have introduced a new theory, we have named Stochastic Time-Dependent Current Density Functional theory (S-TDCDFT) [1]: starting from a suitable description of the system dynamics via a stochastic Schrödinger equation [2], we have proven that given an initial quantum state and the coupling between the system and the environment, there is a one-to-one correspondence between the ensemble-averaged current density and the external vector potential applied to the system.In this talk, I will introduce the stochastic formalism needed for the description of open quantum systems, discuss in details the theorem of Stochastic TD-CDFT, and provide few examples of its applicability like the dissipative dynamics of excited systems, quantum-measurement theory and other applications relevant to charge and energy transport in nanoscale systems.[1] M. Di Ventra and R. D'Agosta, Physical Review Letters 98, 226403 (2007)[2] N.G. van Kampen, Stochastic processes in Physics and Chemistry, (North Holland, 2001), 2nd ed.
Silva-Junior, Mario R.; Schreiber, Marko; Sauer, Stephan P. A.;
2008-01-01
Time-dependent density functional theory (TD-DFT) and DFT-based multireference configuration interaction (DFT/MRCI) calculations are reported for a recently proposed benchmark set of 28 medium-sized organic molecules. Vertical excitation energies, oscillator strengths, and excited-state dipole...... moments are computed using the same geometries (MP2/6-31G*) and basis set (TZVP) as in our previous ab initio benchmark study on electronically excited states. The results from TD-DFT (with the functionals BP86, B3LYP, and BHLYP) and from DFT/MRCI are compared against the previous high-level ab initio...
Spectral density function mapping using 15N relaxation data exclusively.
Farrow, N A; Zhang, O; Szabo, A; Torchia, D A; Kay, L E
1995-09-01
A method is presented for the determination of values of the spectral density function, J(omega), describing the dynamics of amide bond vectors from 15N relaxation parameters alone. Assuming that the spectral density is given by the sum of Lorentzian functions, the approach allows values of J(omega) to be obtained at omega = 0, omega N and 0.870 omega H, where omega N and omega H are Larmor frequencies of nitrogen and proton nuclei, respectively, from measurements of 15N T1, T2 and 1H-15N steady-state NOE values at a single spectrometer frequency. Alternatively, when measurements are performed at two different spectrometer frequencies of i and j MHz, J(omega) can be mapped at omega = 0, omega iN, omega jN, 0.870 omega iH and 0.870 omega iH, where omega iN, for example, is the 15N Larmor frequency for a spectrometer operating at 1 MHz. Additionally, measurements made at two different spectrometer frequencies enable contributions to transverse relaxation from motions on millisecond-microsecond time scales to be evaluated and permit assessment of whether a description of the internal dynamics is consistent with a correlation function consisting of a sum of exponentials. No assumptions about the specific form of the spectral density function describing the dynamics of the 15N-NH bond vector are necessary, provided that dJ(omega)/d omega is relatively constant between omega = omega H + omega N to omega = omega H - omega N. Simulations demonstrate that the method is accurate for a wide range of protein motions and correlation times, and experimental data establish the validity of the methodology. Results are presented for a folded and an unfolded form of the N-terminal SH3 domain of the protein drk.