WorldWideScience

Sample records for dense sensor networks

  1. Double Barrier Coverage in Dense Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    Cheng-Dong Jiang; Guo-Liang Chen

    2008-01-01

    When a sensor network is deployed to detect objects penetrating a protected region, it is not necessary to have every point in the deployment region covered by a sensor. It is enough if the penetrating objects are detected at some point in their trajectory. If a sensor network guarantees that every penetrating object will be detected by two distinct sensors at the same time somewhere in this area, we say that the network provides double barrier coverage (DBC). In this paper, we propose a new planar structure of Sparse Delaunay Triangulation (SparseDT), and prove some elaborate attributes of it. We develop theoretical foundations for double barrier coverage, and propose efficient algorithms with NS2 simulator using which one can activate the necessary sensors to guarantee double barrier coverage while the other sensors go to sleep. The upper and lower bounds of number of active nodes are determined, and we show that high-speed target will be detected efficiently with this configuration.

  2. Multi-channel Support for Dense Wireless Sensor Networking

    NARCIS (Netherlands)

    Durmaz, O.; Dulman, S.O.; Jansen, P.G.; Havinga, Paul J.M.; Havinga, P.J.M.; Lijding, M.E.M.; Meratnia, N.; Meratnia, Nirvana; Wegdam, M.

    2006-01-01

    Currently, most wireless sensor network applications assume the presence of single-channel Medium Access Control (MAC) protocols. When sensor nodes are densely deployed, single-channel MAC protocols may be inadequate due to the higher demand for the limited bandwidth. To overcome this drawback, we

  3. Damage Detection and Localization from Dense Network of Strain Sensors

    Directory of Open Access Journals (Sweden)

    Simon Laflamme

    2016-01-01

    Full Text Available Structural health monitoring of large systems is a complex engineering task due to important practical issues. When dealing with large structures, damage diagnosis, localization, and prognosis necessitate a large number of sensors, which is a nontrivial task due to the lack of scalability of traditional sensing technologies. In order to address this challenge, the authors have recently proposed a novel sensing solution consisting of a low-cost soft elastomeric capacitor that transduces surface strains into measurable changes in capacitance. This paper demonstrates the potential of this technology for damage detection, localization, and prognosis when utilized in dense network configurations over large surfaces. A wind turbine blade is adopted as a case study, and numerical simulations demonstrate the effectiveness of a data-driven algorithm relying on distributed strain data in evidencing the presence and location of damage, and sequentially ranking its severity. Numerical results further show that the soft elastomeric capacitor may outperform traditional strain sensors in damage identification as it provides additive strain measurements without any preferential direction. Finally, simulation with reconstruction of measurements from missing or malfunctioning sensors using the concepts of virtual sensors and Kriging demonstrates the robustness of the proposed condition assessment methodology for sparser or malfunctioning grids.

  4. A Scalable Clustering Algorithm in Dense Mobile Sensor Networks

    Directory of Open Access Journals (Sweden)

    Jianbo Li

    2011-03-01

    Full Text Available Clustering offers a kind of hierarchical organization to provide scalability and basic performance guarantee by partitioning the network into disjoint groups of nodes. In this paper a scalable and energy efficient clustering algorithm is proposed under dense mobile sensor networks scenario. In the initial cluster formation phase, our proposed scheme features a simple execution process with polynomial time complexity, and eliminates the “frozen time” requirement by introducing some GPS-capable mobile nodes to act as cluster heads. In the following cluster maintenance stage, the maintenance of clusters is asynchronously and event driven so as to thoroughly eliminate the “ripple effect” brought by node mobility. As a result local changes in a cluster need not be seen and updated by the entire network, thus bringing greatly reduced communication overheads and being well suitable for the high mobility environment. Extensive simulations have been conducted and the simulation results reveal that our proposed algorithm successfully achieves its target at incurring much less clustering overheads as well as maintaining much more stable cluster structure, as compared to HCC(High Connectivity Clustering  algorithm

  5. Reconstruction of in-plane strain maps using hybrid dense sensor network composed of sensing skin

    Science.gov (United States)

    Downey, Austin; Laflamme, Simon; Ubertini, Filippo

    2016-12-01

    The authors have recently developed a soft-elastomeric capacitive (SEC)-based thin film sensor for monitoring strain on mesosurfaces. Arranged in a network configuration, the sensing system is analogous to a biological skin, where local strain can be monitored over a global area. Under plane stress conditions, the sensor output contains the additive measurement of the two principal strain components over the monitored surface. In applications where the evaluation of strain maps is useful, in structural health monitoring for instance, such signal must be decomposed into linear strain components along orthogonal directions. Previous work has led to an algorithm that enabled such decomposition by leveraging a dense sensor network configuration with the addition of assumed boundary conditions. Here, we significantly improve the algorithm’s accuracy by leveraging mature off-the-shelf solutions to create a hybrid dense sensor network (HDSN) to improve on the boundary condition assumptions. The system’s boundary conditions are enforced using unidirectional RSGs and assumed virtual sensors. Results from an extensive experimental investigation demonstrate the good performance of the proposed algorithm and its robustness with respect to sensors’ layout. Overall, the proposed algorithm is seen to effectively leverage the advantages of a hybrid dense network for application of the thin film sensor to reconstruct surface strain fields over large surfaces.

  6. An Adaptive Channel Access Method for Dynamic Super Dense Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Chunyang Lei

    2015-12-01

    Full Text Available Super dense and distributed wireless sensor networks have become very popular with the development of small cell technology, Internet of Things (IoT, Machine-to-Machine (M2M communications, Vehicular-to-Vehicular (V2V communications and public safety networks. While densely deployed wireless networks provide one of the most important and sustainable solutions to improve the accuracy of sensing and spectral efficiency, a new channel access scheme needs to be designed to solve the channel congestion problem introduced by the high dynamics of competing nodes accessing the channel simultaneously. In this paper, we firstly analyzed the channel contention problem using a novel normalized channel contention analysis model which provides information on how to tune the contention window according to the state of channel contention. We then proposed an adaptive channel contention window tuning algorithm in which the contention window tuning rate is set dynamically based on the estimated channel contention level. Simulation results show that our proposed adaptive channel access algorithm based on fast contention window tuning can achieve more than 95 % of the theoretical optimal throughput and 0 . 97 of fairness index especially in dynamic and dense networks.

  7. An Adaptive Channel Access Method for Dynamic Super Dense Wireless Sensor Networks.

    Science.gov (United States)

    Lei, Chunyang; Bie, Hongxia; Fang, Gengfa; Zhang, Xuekun

    2015-12-03

    Super dense and distributed wireless sensor networks have become very popular with the development of small cell technology, Internet of Things (IoT), Machine-to-Machine (M2M) communications, Vehicular-to-Vehicular (V2V) communications and public safety networks. While densely deployed wireless networks provide one of the most important and sustainable solutions to improve the accuracy of sensing and spectral efficiency, a new channel access scheme needs to be designed to solve the channel congestion problem introduced by the high dynamics of competing nodes accessing the channel simultaneously. In this paper, we firstly analyzed the channel contention problem using a novel normalized channel contention analysis model which provides information on how to tune the contention window according to the state of channel contention. We then proposed an adaptive channel contention window tuning algorithm in which the contention window tuning rate is set dynamically based on the estimated channel contention level. Simulation results show that our proposed adaptive channel access algorithm based on fast contention window tuning can achieve more than 95 % of the theoretical optimal throughput and 0 . 97 of fairness index especially in dynamic and dense networks.

  8. The Benefits of Using Dense Temperature Sensor Networks to Monitor Urban Warming

    Science.gov (United States)

    Twine, T. E.; Snyder, P. K.; Kucharik, C. J.; Schatz, J.

    2015-12-01

    Urban heat islands (UHIs) occur when urban and suburban areas experience temperatures that are elevated relative to their rural surroundings because of differences in the fraction of gray and green infrastructure. Studies have shown that communities most at risk for impacts from climate-related disasters (i.e., lower median incomes, higher poverty, lower education, and minorities) tend to live in the hottest areas of cities. Development of adequate climate adaptation tools for cities relies on knowledge of how temperature varies across space and time. Traditionally, a city's urban heat island has been quantified using near-surface air temperature measurements from a few sites. This methodology assumes (1) that the UHI can be characterized by the difference in air temperature from a small number of points, and (2) that these few points represent the urban and rural signatures of the region. This methodology ignores the rich information that could be gained from measurements across the urban to rural transect. This transect could traverse elevations, water bodies, vegetation fraction, and other land surface properties. Two temperature sensor networks were designed and implemented in the Minneapolis-Saint Paul, MN and Madison, WI metropolitan areas beginning in 2011 and 2012, respectively. Both networks use the same model sensor and record temperature every 15 minutes from ~150 sensors. Data from each network has produced new knowledge of how temperature varies diurnally and seasonally across the cities and how the UHI magnitude is influenced by weather phenomena (e.g., wind, snow cover, heat waves) and land surface characteristics such as proximity to inland lakes. However, the two metropolitan areas differ in size, population, structure, and orientation to water bodies. In addition, the sensor networks were established in very different manners. We describe these differences and present lessons learned from the design and ongoing efforts of these two dense networks

  9. Bridge damage detection using spatiotemporal patterns extracted from dense sensor network

    Science.gov (United States)

    Liu, Chao; Gong, Yongqiang; Laflamme, Simon; Phares, Brent; Sarkar, Soumik

    2017-01-01

    The alarmingly degrading state of transportation infrastructures combined with their key societal and economic importance calls for automatic condition assessment methods to facilitate smart management of maintenance and repairs. With the advent of ubiquitous sensing and communication capabilities, scalable data-driven approaches is of great interest, as it can utilize large volume of streaming data without requiring detailed physical models that can be inaccurate and computationally expensive to run. Properly designed, a data-driven methodology could enable fast and automatic evaluation of infrastructures, discovery of causal dependencies among various sub-system dynamic responses, and decision making with uncertainties and lack of labeled data. In this work, a spatiotemporal pattern network (STPN) strategy built on symbolic dynamic filtering (SDF) is proposed to explore spatiotemporal behaviors in a bridge network. Data from strain gauges installed on two bridges are generated using finite element simulation for three types of sensor networks from a density perspective (dense, nominal, sparse). Causal relationships among spatially distributed strain data streams are extracted and analyzed for vehicle identification and detection, and for localization of structural degradation in bridges. Multiple case studies show significant capabilities of the proposed approach in: (i) capturing spatiotemporal features to discover causality between bridges (geographically close), (ii) robustness to noise in data for feature extraction, (iii) detecting and localizing damage via comparison of bridge responses to similar vehicle loads, and (iv) implementing real-time health monitoring and decision making work flow for bridge networks. Also, the results demonstrate increased sensitivity in detecting damages and higher reliability in quantifying the damage level with increase in sensor network density.

  10. A Low Collision and High Throughput Data Collection Mechanism for Large-Scale Super Dense Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Chunyang Lei

    2016-07-01

    Full Text Available Super dense wireless sensor networks (WSNs have become popular with the development of Internet of Things (IoT, Machine-to-Machine (M2M communications and Vehicular-to-Vehicular (V2V networks. While highly-dense wireless networks provide efficient and sustainable solutions to collect precise environmental information, a new channel access scheme is needed to solve the channel collision problem caused by the large number of competing nodes accessing the channel simultaneously. In this paper, we propose a space-time random access method based on a directional data transmission strategy, by which collisions in the wireless channel are significantly decreased and channel utility efficiency is greatly enhanced. Simulation results show that our proposed method can decrease the packet loss rate to less than 2 % in large scale WSNs and in comparison with other channel access schemes for WSNs, the average network throughput can be doubled.

  11. A Low Collision and High Throughput Data Collection Mechanism for Large-Scale Super Dense Wireless Sensor Networks

    Science.gov (United States)

    Lei, Chunyang; Bie, Hongxia; Fang, Gengfa; Gaura, Elena; Brusey, James; Zhang, Xuekun; Dutkiewicz, Eryk

    2016-01-01

    Super dense wireless sensor networks (WSNs) have become popular with the development of Internet of Things (IoT), Machine-to-Machine (M2M) communications and Vehicular-to-Vehicular (V2V) networks. While highly-dense wireless networks provide efficient and sustainable solutions to collect precise environmental information, a new channel access scheme is needed to solve the channel collision problem caused by the large number of competing nodes accessing the channel simultaneously. In this paper, we propose a space-time random access method based on a directional data transmission strategy, by which collisions in the wireless channel are significantly decreased and channel utility efficiency is greatly enhanced. Simulation results show that our proposed method can decrease the packet loss rate to less than 2% in large scale WSNs and in comparison with other channel access schemes for WSNs, the average network throughput can be doubled. PMID:27438839

  12. A Low Collision and High Throughput Data Collection Mechanism for Large-Scale Super Dense Wireless Sensor Networks.

    Science.gov (United States)

    Lei, Chunyang; Bie, Hongxia; Fang, Gengfa; Gaura, Elena; Brusey, James; Zhang, Xuekun; Dutkiewicz, Eryk

    2016-07-18

    Super dense wireless sensor networks (WSNs) have become popular with the development of Internet of Things (IoT), Machine-to-Machine (M2M) communications and Vehicular-to-Vehicular (V2V) networks. While highly-dense wireless networks provide efficient and sustainable solutions to collect precise environmental information, a new channel access scheme is needed to solve the channel collision problem caused by the large number of competing nodes accessing the channel simultaneously. In this paper, we propose a space-time random access method based on a directional data transmission strategy, by which collisions in the wireless channel are significantly decreased and channel utility efficiency is greatly enhanced. Simulation results show that our proposed method can decrease the packet loss rate to less than 2 % in large scale WSNs and in comparison with other channel access schemes for WSNs, the average network throughput can be doubled.

  13. Evaluation of DECT-ULE for robust communication in dense wireless sensor networks

    NARCIS (Netherlands)

    Das, Kallol; Havinga, Paul J.M.

    2012-01-01

    In today’s world wireless sensor networks (WSNs) have enormous applications which made our everyday life much easier. In most of these applications, the unlicensed 2.4 GHz frequency band has been used for sensor communications. Due to the wide use, the chance of getting interference in this frequenc

  14. Evaluation of DECT-ULE for robust communication in dense wireless sensor networks

    NARCIS (Netherlands)

    Das, Kallol; Havinga, Paul J.M.

    2012-01-01

    In today’s world wireless sensor networks (WSNs) have enormous applications which made our everyday life much easier. In most of these applications, the unlicensed 2.4 GHz frequency band has been used for sensor communications. Due to the wide use, the chance of getting interference in this

  15. Evaluation of DECT-ULE for robust communication in dense wireless sensor networks

    NARCIS (Netherlands)

    Das, Kallol; Havinga, Paul

    2012-01-01

    In today’s world wireless sensor networks (WSNs) have enormous applications which made our everyday life much easier. In most of these applications, the unlicensed 2.4 GHz frequency band has been used for sensor communications. Due to the wide use, the chance of getting interference in this frequenc

  16. Imaging the atmosphere using volcanic infrasound recorded on a dense local sensor network

    Science.gov (United States)

    Marcillo, O. E.; Johnson, J. B.; Johnson, R.

    2010-12-01

    We deployed a 47-node infrasound sensor network around Kilauea’s Halemaumau Vent to image the atmospheric conditions of the near-surface. This active vent is a persistent radiator of energetic infrasound enabling us to probe atmospheric winds and temperatures. This research builds upon a previous experiment that recorded infrasound on a three-node network, to determine relative phase delay and invert for atmospheric wind. The technique developed for this previous analysis assumed the intrinsic sound speed and was able to track the evolution of the average wind field in a large area (around 10 km2) and was largely insensitive to local meteorological effects, caused by topography and vegetation. The results of this previous experiment showed the potential of this technique for atmospheric studies and called for a following experiment with a denser sensor network over a larger area. During the summer 2010, we returned to Kilauea and deployed a 47-sensor network in three different configurations around Kilauea summit and down the volcano’s flanks. Persistent infrasonic tremor was ‘loud’ with excess pressures up to 10 Pa (when scaled to 1 km) and periods of high acoustic emissions that lasted from hours to days. The instrumentation for this experiment was composed of single-channel RefTek RT125A Texan digitizers and InfraNMT infrasound sensors. The Texan digitizers provide high-resolution 24-bit analog to digital conversion and can operate continuously for approximately five days with two D-cell batteries. The InfraNMT sensor is based on a piezo-electric transducer and was developed at the Infrasound Laboratory at New Mexico Tech. This sensor features low power (< 3 mA at 9 V) and flat response between 0.02 to 50 Hz. Three different network topologies were tested during this two-week experiment. For the first and second topologies, the sensors were deployed along established roads on two almost perpendicular sensor lines centered at the Halema’uma’u crater

  17. The categorization of natural scenes : brain attention networks revealed by dense sensor ERPs

    OpenAIRE

    Codispoti, Maurizio; Ferrari, Vera; Junghöfer, Markus; Schupp, Harald Thomas

    2006-01-01

    The present study examined cortical indicators of selective attention underlying categorization based on target features in natural scenes. The primary focus was to determine the neural sources associated with the processing of target stimuli containing animals compared to non-target control stimuli. Neural source estimation techniques [current source density (CSD) and L2-minimum norm estimate (L2-MNE)] were used to determine the sources of the potential fields measured from 58 sensor sites. ...

  18. The categorization of natural scenes: brain attention networks revealed by dense sensor ERPs.

    Science.gov (United States)

    Codispoti, Maurizio; Ferrari, Vera; Junghöfer, Markus; Schupp, Harald T

    2006-08-15

    The present study examined cortical indicators of selective attention underlying categorization based on target features in natural scenes. The primary focus was to determine the neural sources associated with the processing of target stimuli containing animals compared to non-target control stimuli. Neural source estimation techniques [current source density (CSD) and L2-minimum norm estimate (L2-MNE)] were used to determine the sources of the potential fields measured from 58 sensor sites. Assuring an excellent signal-to-noise ratio, the categorization task consisted of 2400 trials. Replicating previous findings, target and non-target ERP activity diverged sharply around 150 ms after stimulus onset and the early differential ERP activity appeared as positive deflection over fronto-central sensor sites and as negative deflection over temporo-occipital regions. Both source estimation techniques (CSD and L2-MNE) suggested primary sources of the early differential ERP activity in posterior, visual-associative brain regions and, although less pronounced, revealed the contribution of additional anterior sources. These findings suggest that selective attention to category-relevant features reflects the interactions between prefrontal and inferior temporal cortex during visual processing of natural scenes.

  19. A Simple Battery Aware Gossip Based Sleep Protocol for Densely Deployed Ad-hoc and Sensor Networks

    OpenAIRE

    Shukla, Ashish

    2010-01-01

    Conserving power in mobile ad-hoc and sensor networks is a big challenge. Most of the nodes in these networks, in general, are battery powered, therefore, an efficient power saving protocol is required to extend the lifetime of such networks. A lot of work has been done and several protocols have been proposed to address this problem. Gossip based protocols, which are based on the results of percolation theory, significantly reduce power consumption with very little implementation overhead. H...

  20. A Simple Battery Aware Gossip Based Sleep Protocol for Densely Deployed Ad-hoc and Sensor Networks

    CERN Document Server

    Shukla, Ashish

    2010-01-01

    Conserving power in mobile ad-hoc and sensor networks is a big challenge. Most of the nodes in these networks, in general, are battery powered, therefore, an efficient power saving protocol is required to extend the lifetime of such networks. A lot of work has been done and several protocols have been proposed to address this problem. Gossip based protocols, which are based on the results of percolation theory, significantly reduce power consumption with very little implementation overhead. However, not much work has been done to make gossiping battery aware. In this paper we introduce a simple gossip based battery aware sleep protocol. The protocol allows low battery nodes to sleep more, therefore, improves overall network lifetime.

  1. Cell Selection Game for Densely-Deployed Sensor and Mobile Devices In 5G Networks Integrating Heterogeneous Cells and the Internet of Things

    Directory of Open Access Journals (Sweden)

    Lusheng Wang

    2015-09-01

    Full Text Available With the rapid development of wireless networking technologies, the Internet of Things and heterogeneous cellular networks (HCNs tend to be integrated to form a promising wireless network paradigm for 5G. Hyper-dense sensor and mobile devices will be deployed under the coverage of heterogeneous cells, so that each of them could freely select any available cell covering it and compete for resource with others selecting the same cell, forming a cell selection (CS game between these devices. Since different types of cells usually share the same portion of the spectrum, devices selecting overlapped cells can experience severe inter-cell interference (ICI. In this article, we study the CS game among a large amount of densely-deployed sensor and mobile devices for their uplink transmissions in a two-tier HCN. ICI is embedded with the traditional congestion game (TCG, forming a congestion game with ICI (CGI and a congestion game with capacity (CGC. For the three games above, we theoretically find the circular boundaries between the devices selecting the macrocell and those selecting the picocells, indicated by the pure strategy Nash equilibria (PSNE. Meanwhile, through a number of simulations with different picocell radii and different path loss exponents, the collapse of the PSNE impacted by severe ICI (i.e., a large number of picocell devices change their CS preferences to the macrocell is profoundly revealed, and the collapse points are identified.

  2. Cell Selection Game for Densely-Deployed Sensor and Mobile Devices In 5G Networks Integrating Heterogeneous Cells and the Internet of Things.

    Science.gov (United States)

    Wang, Lusheng; Wang, Yamei; Ding, Zhizhong; Wang, Xiumin

    2015-09-18

    With the rapid development of wireless networking technologies, the Internet of Things and heterogeneous cellular networks (HCNs) tend to be integrated to form a promising wireless network paradigm for 5G. Hyper-dense sensor and mobile devices will be deployed under the coverage of heterogeneous cells, so that each of them could freely select any available cell covering it and compete for resource with others selecting the same cell, forming a cell selection (CS) game between these devices. Since different types of cells usually share the same portion of the spectrum, devices selecting overlapped cells can experience severe inter-cell interference (ICI). In this article, we study the CS game among a large amount of densely-deployed sensor and mobile devices for their uplink transmissions in a two-tier HCN. ICI is embedded with the traditional congestion game (TCG), forming a congestion game with ICI (CGI) and a congestion game with capacity (CGC). For the three games above, we theoretically find the circular boundaries between the devices selecting the macrocell and those selecting the picocells, indicated by the pure strategy Nash equilibria (PSNE). Meanwhile, through a number of simulations with different picocell radii and different path loss exponents, the collapse of the PSNE impacted by severe ICI (i.e., a large number of picocell devices change their CS preferences to the macrocell) is profoundly revealed, and the collapse points are identified.

  3. Structural Transitions in Dense Networks

    CERN Document Server

    Lambiotte, R; Bhat, U; Redner, S

    2016-01-01

    We introduce an evolving network model in which a new node attaches to a randomly selected target node and also to each of its neighbors with probability $p$. The resulting network is sparse for $p<\\frac{1}{2}$ and dense (average degree increasing with number of nodes $N$) for $p\\geq \\frac{1}{2}$. In the dense regime, individual networks realizations built by this copying mechanism are disparate and not self-averaging. Further, there is an infinite sequence of structural anomalies at $p=\\frac{2}{3}$, $\\frac{3}{4}$, $\\frac{4}{5}$, etc., where the dependences on $N$ of the number of triangles (3-cliques), 4-cliques, undergo phase transitions. When linking to second neighbors of the target can occur, the probability that the resulting graph is complete---where all nodes are connected---is non-zero as $N\\to\\infty$.

  4. Ubiquitous Sensor Network for Chemical Sensors

    Institute of Scientific and Technical Information of China (English)

    Wan-Young Chung; Risto Myllylae

    2006-01-01

    Wireless sensor networks have been identified as one of the most important technologies for the 21st century. Recent advances in micro sensor fabrication technology and wireless communication technology enable the practical deployment of large-scale, low-power, inexpensive sensor networks. Such an approach offers an advantage over traditional sensing methods in many ways: large-scale, dense deployment not only extends spatial coverage and achieves higher resolution, but also increases the system's fault-tolerance and robustness. Moreover, the ad-hoc nature of wireless sensor networks makes them even more attractive for military and other risk-associated applications, such as environmental observation and habitat monitoring.

  5. 5G Ultra-Dense Cellular Networks

    OpenAIRE

    Ge, Xiaohu; Tu, Song; Mao, Guoqiang; Wang, Cheng-xiang; Han, Tao

    2015-01-01

    Traditional ultra-dense wireless networks are recommended as a complement for cellular networks and are deployed in partial areas, such as hotspot and indoor scenarios. Based on the massive multiple-input multi-output (MIMO) antennas and the millimeter wavecommunication technologies, the 5G ultra-dense cellular network is proposed to deploy in overall cellular scenarios. Moreover, a distribution network architecture is presented for 5G ultra-dense cellular networks. Furthermore, the backhaul ...

  6. Dense Clustered Multi-Channel Wireless Sensor Cloud

    Directory of Open Access Journals (Sweden)

    Sivaramakrishnan Sivakumar

    2015-08-01

    Full Text Available Dense Wireless Sensor Network Clouds have an inherent issue of latency and packet drops with regards to data collection. Though there is extensive literature that tries to address these issues through either scheduling, channel contention or a combination of the two, the problem still largely exists. In this paper, a Clustered Multi-Channel Scheduling Protocol (CMSP is designed that creates a Voronoi partition of a dense network. Each partition is assigned a channel, and a scheduling scheme is adopted to collect data within the Voronoi partitions. This scheme collects data from the partitions concurrently and then passes it to the base station. CMSP is compared using simulation with other multi-channel protocols like Tree-based Multi-Channel, Multi-Channel MAC and Multi-frequency Media Access Control for wireless sensor networks. Results indicate CMSP has higher throughput and data delivery ratio at a lower power consumption due to network partitioning and hierarchical scheduling that minimizes load on the network.

  7. Mechanisms for Prolonging Network Lifetime in Wireless Sensor Networks

    Science.gov (United States)

    Yang, Yinying

    2010-01-01

    Sensors are used to monitor and control the physical environment. A Wireless Sensor Network (WSN) is composed of a large number of sensor nodes that are densely deployed either inside the phenomenon or very close to it [18][5]. Sensor nodes measure various parameters of the environment and transmit data collected to one or more sinks, using…

  8. Interference Coordination for Dense Wireless Networks

    DEFF Research Database (Denmark)

    Soret, Beatriz; Pedersen, Klaus I.; Jørgensen, Niels T.K.

    2015-01-01

    The promise of ubiquitous and super-fast connectivity for the upcoming years will be in large part fulfilled by the addition of base stations and spectral aggregation. The resulting very dense networks (DenseNets) will face a number of technical challenges. Among others, the interference emerges ...... simply react to an identified interference problem. As an example, we propose two algorithms to apply time domain and frequency domain small cell interference coordination in a DenseNet....

  9. Environmental Sensor Networks

    OpenAIRE

    Martinez, Kirk; Hart, Jane; Ong, Royan

    2004-01-01

    Sensor networks for the natural environment require an understanding of earth science, combined with sensor, communications and computer technology. We discuss the evolution from data logging to sensor networks, describe our research from a glacial environment and highlight future challenges in this field.

  10. Interference Alignment in Dense Wireless Networks

    CERN Document Server

    Niesen, Urs

    2009-01-01

    We consider arbitrary dense wireless networks, in which $n$ nodes are placed in an arbitrary (deterministic) manner on a square region of unit area and communicate with each other over Gaussian fading channels. We provide inner and outer bounds for the $n\\times n$-dimensional unicast and the $n\\times 2^n$-dimensional multicast capacity regions of such a wireless network. These inner and outer bounds differ only by a factor $O(\\log(n))$, yielding a fairly tight scaling characterization of the entire regions. The communication schemes achieving the inner bounds use interference alignment as a central technique and are surprisingly simple.

  11. Wireless Sensors Network (Sensornet)

    Science.gov (United States)

    Perotti, J.

    2003-01-01

    The Wireless Sensor Network System presented in this paper provides a flexible reconfigurable architecture that could be used in a broad range of applications. It also provides a sensor network with increased reliability; decreased maintainability costs, and assured data availability by autonomously and automatically reconfiguring to overcome communication interferences.

  12. Sensor Network Motes:

    DEFF Research Database (Denmark)

    Leopold, Martin

    This dissertation describes our efforts to improve sensor network performance evaluation and portability, within the context of the sensor network project Hogthrob. In Hogthrob, we faced the challenge of building an sensor network architecture for sow monitoring. This application has hard...... requirements on price and performance, and shows great potential for using sensor networks. Throughout the project we let the application requirements guide our design choices, leading us to push the technologies further to meet the specific goal of the application. In this dissertation, we attack two key...... to investigate these challenges and apart from developing the methodologies, we also present the results of our experiments. In particular, we present a new vector based methodology for performance evaluation of sensor network devices (motes) and applications, based on application specific benchmarking...

  13. Censored cooperative positioning for dense wireless networks

    NARCIS (Netherlands)

    Das, Kallol; Wymeersch, Henk

    Cooperative positioning is an emerging topic in wireless sensor networks and navigation. It can improve the positioning accuracy and coverage in GPS-challenged conditions such as inside tunnels, in urban canyons, and indoors. Different algorithms have been proposed relying on iteratively exchanging

  14. Wireless Fractal Ultra-Dense Cellular Networks.

    Science.gov (United States)

    Hao, Yixue; Chen, Min; Hu, Long; Song, Jeungeun; Volk, Mojca; Humar, Iztok

    2017-04-12

    With the ever-growing number of mobile devices, there is an explosive expansion in mobile data services. This represents a challenge for the traditional cellular network architecture to cope with the massive wireless traffic generated by mobile media applications. To meet this challenge, research is currently focused on the introduction of a small cell base station (BS) due to its low transmit power consumption and flexibility of deployment. However, due to a complex deployment environment and low transmit power of small cell BSs, the coverage boundary of small cell BSs will not have a traditional regular shape. Therefore, in this paper, we discuss the coverage boundary of an ultra-dense small cell network and give its main features: aeolotropy of path loss fading and fractal coverage boundary. Simple performance analysis is given, including coverage probability and transmission rate, etc., based on stochastic geometry theory and fractal theory. Finally, we present an application scene and discuss challenges in the ultra-dense small cell network.

  15. Distributed Service Discovery for Heterogeneous Wireless Sensor Networks

    NARCIS (Netherlands)

    Marin-Perianu, R.S.; Scholten, J.; Havinga, P.J.M.

    2006-01-01

    Service discovery in heterogeneous Wireless Sensor Networks is a challenging research objective, due to the inherent limitations of sensor nodes and their extensive and dense deployment. The protocols proposed for ad hoc networks are too heavy for sensor environments. This paper presents a resourcea

  16. Miniaturized wireless sensor network

    CERN Document Server

    Lecointre, Aubin; Dubuc, David; Katia, Grenier; Patrick, Pons; Aubert, Hervé; Muller, A; Berthou, Pascal; Gayraud, Thierry; Plana, Robert

    2010-01-01

    This paper addresses an overview of the wireless sensor networks. It is shown that MEMS/NEMS technologies and SIP concept are well suited for advanced architectures. It is also shown analog architectures have to be compatible with digital signal techniques to develop smart network of microsystem.

  17. Wireless Sensor Networks Approach

    Science.gov (United States)

    Perotti, Jose M.

    2003-01-01

    This viewgraph presentation provides information on hardware and software configurations for a network architecture for sensors. The hardware configuration uses a central station and remote stations. The software configuration uses the 'lost station' software algorithm. The presentation profiles a couple current examples of this network architecture in use.

  18. Wireless rechargeable sensor networks

    CERN Document Server

    Yang, Yuanyuan

    2015-01-01

    This SpringerBrief provides a concise guide to applying wireless energy transfer techniques in traditional battery-powered sensor networks. It examines the benefits and challenges of wireless power including efficiency and reliability. The authors build a wireless rechargeable sensor networks from scratch and aim to provide perpetual network operation. Chapters cover a wide range of topics from the collection of energy information and recharge scheduling to joint design with typical sensing applications such as data gathering. Problems are approached using a natural combination of probability

  19. Advances in wireless sensors and sensor networks

    CERN Document Server

    Mukhopadhyay, Subhas Chandra; Leung, Henry

    2010-01-01

    Written by experts, this book illustrates and collects recent advances in wireless sensors and sensor networks. It provides clever support for scientists, students and researchers in order to stimulate exchange and discussions for further developments.

  20. Modular sensor network node

    Science.gov (United States)

    Davis, Jesse Harper Zehring; Stark, Jr., Douglas Paul; Kershaw, Christopher Patrick; Kyker, Ronald Dean

    2008-06-10

    A distributed wireless sensor network node is disclosed. The wireless sensor network node includes a plurality of sensor modules coupled to a system bus and configured to sense a parameter. The parameter may be an object, an event or any other parameter. The node collects data representative of the parameter. The node also includes a communication module coupled to the system bus and configured to allow the node to communicate with other nodes. The node also includes a processing module coupled to the system bus and adapted to receive the data from the sensor module and operable to analyze the data. The node also includes a power module connected to the system bus and operable to generate a regulated voltage.

  1. Security Aspects of Sensor Networks

    Directory of Open Access Journals (Sweden)

    Mohd Muntjir

    2013-01-01

    Full Text Available Sensor networks are amassed wireless networks of small, low-cost sensors that collect and propagate environmental data. The emerging field of wireless sensor networks integrates sensing, computation, and communication into a single device. The power of wireless sensor networks verifies in the capability to deploy huge numbers of small nodes that collaborates and configure them. Wireless sensor networks simplify monitoring and handling of physical environments from remote locations with best accuracy. Security protocols associated to sensor network are analyzed in this paper.

  2. Programming Wireless Sensor Networks

    Science.gov (United States)

    Lopes, Luís; Martins, Francisco; Barros, João

    Sensor networks can be viewed as a collection of tiny, low-cost devices programmed to sense the physical world and that communicate over radio links [12]. The devices are commonly called motes or smart dust [676], in allusion to their computational and sensing capabilities, as well as their increasingly small size.

  3. Distributed sensor networks

    CERN Document Server

    Rubin, Donald B; Carlin, John B; Iyengar, S Sitharama; Brooks, Richard R; University, Clemson

    2014-01-01

    An Overview, S.S. Iyengar, Ankit Tandon, and R.R. BrooksMicrosensor Applications, David ShepherdA Taxonomy of Distributed Sensor Networks, Shivakumar Sastry and S.S. IyengarContrast with Traditional Systems, R.R. BrooksDigital Signal Processing Background, Yu Hen HuImage-Processing Background Lynne Grewe and Ben ShahshahaniObject Detection and Classification, Akbar M. SayeedParameter Estimation David FriedlanderTarget Tracking with Self-Organizing Distributed Sensors R.R. Brooks, C. Griffin, D.S. Friedlander, and J.D. KochCollaborative Signal and Information Processing: AnInformation-Directed Approach Feng Zhao, Jie Liu, Juan Liu, Leonidas Guibas, and James ReichEnvironmental Effects, David C. SwansonDetecting and Counteracting Atmospheric Effects Lynne L. GreweSignal Processing and Propagation for Aeroacoustic Sensor Networks, Richard J. Kozick, Brian M. Sadler, and D. Keith WilsonDistributed Multi-Target Detection in Sensor Networks Xiaoling Wang, Hairong Qi, and Steve BeckFoundations of Data Fusion f...

  4. Sensor Networks for Medical Care

    OpenAIRE

    Shnayder, Victor; Chen, Bor-rong; Lorincz, Konrad; Fulford-Jones, Thaddeus R. F.; Welsh, Matt

    2005-01-01

    Sensor networks have the potential to greatly impact many aspects of medical care. By outfitting patients with wireless, wearable vital sign sensors, collecting detailed real-time data on physiological status can be greatly simplified. However, there is a significant gap between existing sensor network systems and the needs of medical care. In particular, medical sensor networks must support multicast routing topologies, node mobility, a wide range of data rates and high degrees of reliabilit...

  5. Wide area sensor network

    Science.gov (United States)

    Mukhopadhyay, Sanjoy; Nix, Tricia; Junker, Robert; Brentano, Josef; Khona, Dhiren

    2006-05-01

    The technical concept for this project has existed since the Chernobyl accident in 1986. A host of Eastern European nations have developed countrywide grid of sensors to monitor airborne radiation. The objective is to build a radiological sensor network for real-time monitoring of environmental radiation levels in order to provide data for warning, and consequentially the assessment of a nuclear event. A network of radiation measuring equipment consisting of gamma, neutron, alpha, and beta counters would be distributed over a large area (preferably on fire station roof tops) and connected by a wireless network to the emergency response center. The networks would be deployed in urban environments and would supply first responders and federal augmentation teams (including those from the U.S. Departments of Energy, Defense, Justice, and Homeland Security) with detailed, accurate information regarding the transport of radioactive environmental contaminants, so the agencies can provide a safe and effective response. A networked sensor capability would be developed, with fixed sensors deployed at key locations and in sufficient numbers, to provide adequate coverage for early warning, and input to post-event emergency response. An overall system description and specification will be provided, including detector characteristics, communication protocols, infrastructure and maintenance requirements, and operation procedures. The system/network can be designed for a specifically identified urban area, or for a general urban area scalable to cities of specified size. Data collected via the network will be transmitted directly to the appropriate emergency response center and shared with multiple agencies via the Internet or an Intranet. The data collected will be managed using commercial off - the - shelf Geographical Information System (GIS). The data will be stored in a database and the GIS software will aid in analysis and management of the data. Unique features of the

  6. remote sensor network

    Science.gov (United States)

    von Unold, Georg; Junker, Astrid; Altmann, Thomas

    2016-04-01

    High-throughput (HT) plant phenotyping systems enable the quantitative analysis of a variety of plant features in a fully automated fashion. The comprehensive phenomics infrastructure at IPK comprises three LemnaTec conveyor belt-based (plant-to-sensor) systems for the simultaneous analysis of large numbers of individual plants of different sizes. For monitoring of environmental conditions within the plant growth area and soil conditions in individual pots, highly modular and flexible remote sensing devices are required. We present the architecture of a wireless sensor network implemented in the HT plant phenotyping systems at IPK in the frame of the German Plant Phenotyping Network (DPPN). This system comprises 350 soil monitoring modules, each measuring water content, water matrix potential, temperature and electric conductivity. Furthermore small and large sensor platforms enable the continuous monitoring of environmental parameters such as incident photosynthetic active radiation, total radiation balance, relative humidity and CO2 concentration and more. Finally we present an introduction into data management and maintenance."

  7. Sensor networks for sustainable development

    CERN Document Server

    Ilyas, Mohammad; Alwakeel, Mohammed M; Aggoune, el-Hadi M

    2014-01-01

    ContentsPreface AcknowledgmentsEditorsContributorsAgricultureA Review of Applications of Sensor Networks in Smart AgricultureAhsan AbdullahWireless Sensor Networks with Dynamic Nodes for Water and Crop Health Managementel-Hadi M. Aggoune, Sami S. Alwakeel, Mohammed M. Alwakeel, and Mohammad Ammad-UddinEnvironmentScaling Smart EnvironmentsDiane J. CookLocalization of a Wireless Sensor Network for Environment Monitoring using Maximum Likelihood Estimation with Negative

  8. An intelligent surveillance platform for large metropolitan areas with dense sensor deployment.

    Science.gov (United States)

    Fernández, Jorge; Calavia, Lorena; Baladrón, Carlos; Aguiar, Javier M; Carro, Belén; Sánchez-Esguevillas, Antonio; Alonso-López, Jesus A; Smilansky, Zeev

    2013-06-07

    This paper presents an intelligent surveillance platform based on the usage of large numbers of inexpensive sensors designed and developed inside the European Eureka Celtic project HuSIMS. With the aim of maximizing the number of deployable units while keeping monetary and resource/bandwidth costs at a minimum, the surveillance platform is based on the usage of inexpensive visual sensors which apply efficient motion detection and tracking algorithms to transform the video signal in a set of motion parameters. In order to automate the analysis of the myriad of data streams generated by the visual sensors, the platform's control center includes an alarm detection engine which comprises three components applying three different Artificial Intelligence strategies in parallel. These strategies are generic, domain-independent approaches which are able to operate in several domains (traffic surveillance, vandalism prevention, perimeter security, etc.). The architecture is completed with a versatile communication network which facilitates data collection from the visual sensors and alarm and video stream distribution towards the emergency teams. The resulting surveillance system is extremely suitable for its deployment in metropolitan areas, smart cities, and large facilities, mainly because cheap visual sensors and autonomous alarm detection facilitate dense sensor network deployments for wide and detailed coverage.

  9. An Intelligent Surveillance Platform for Large Metropolitan Areas with Dense Sensor Deployment

    Directory of Open Access Journals (Sweden)

    Jesus A. Alonso-López

    2013-06-01

    Full Text Available This paper presents an intelligent surveillance platform based on the usage of large numbers of inexpensive sensors designed and developed inside the European Eureka Celtic project HuSIMS. With the aim of maximizing the number of deployable units while keeping monetary and resource/bandwidth costs at a minimum, the surveillance platform is based on the usage of inexpensive visual sensors which apply efficient motion detection and tracking algorithms to transform the video signal in a set of motion parameters. In order to automate the analysis of the myriad of data streams generated by the visual sensors, the platform’s control center includes an alarm detection engine which comprises three components applying three different Artificial Intelligence strategies in parallel. These strategies are generic, domain-independent approaches which are able to operate in several domains (traffic surveillance, vandalism prevention, perimeter security, etc.. The architecture is completed with a versatile communication network which facilitates data collection from the visual sensors and alarm and video stream distribution towards the emergency teams. The resulting surveillance system is extremely suitable for its deployment in metropolitan areas, smart cities, and large facilities, mainly because cheap visual sensors and autonomous alarm detection facilitate dense sensor network deployments for wide and detailed coverage.

  10. Underwater Sensor Nodes and Networks

    Directory of Open Access Journals (Sweden)

    Jaime Lloret

    2013-09-01

    Full Text Available Sensor technology has matured enough to be used in any type of environment. The appearance of new physical sensors has increased the range of environmental parameters for gathering data. Because of the huge amount of unexploited resources in the ocean environment, there is a need of new research in the field of sensors and sensor networks. This special issue is focused on collecting recent advances on underwater sensors and underwater sensor networks in order to measure, monitor, surveillance of and control of underwater environments. On the one hand, from the sensor node perspective, we will see works related with the deployment of physical sensors, development of sensor nodes and transceivers for sensor nodes, sensor measurement analysis and several issues such as layer 1 and 2 protocols for underwater communication and sensor localization and positioning systems. On the other hand, from the sensor network perspective, we will see several architectures and protocols for underwater environments and analysis concerning sensor network measurements. Both sides will provide us a complete view of last scientific advances in this research field.

  11. Sensor Network Architectures for Monitoring Underwater Pipelines

    OpenAIRE

    Imad Jawhar; Jameela Al-Jaroodi; Nader Mohamed; Liren Zhang

    2011-01-01

    This paper develops and compares different sensor network architecture designs that can be used for monitoring underwater pipeline infrastructures. These architectures are underwater wired sensor networks, underwater acoustic wireless sensor networks, RF (Radio Frequency) wireless sensor networks, integrated wired/acoustic wireless sensor networks, and integrated wired/RF wireless sensor networks. The paper also discusses the reliability challenges and enhancement approaches for these network...

  12. ENERGY OPTIMISATION SCHEMES FOR WIRELESS SENSOR NETWORK

    Directory of Open Access Journals (Sweden)

    Vivekanand Jha

    2012-05-01

    Full Text Available A sensor network is composed of a large number of sensor nodes, which are densely deployed either inside the phenomenon or very close to it. Sensor nodes have sensing, processing and transmitting capability . They however have limited energy and measures need to be taken to make op- timum usage of their energy and save them from task of only receiving and transmitting data without processing. Various techniques for energy utilization optimisation have been proposed Ma jor players are however clustering and relay node placement. In the research related to relay node placement, it has been proposed to deploy some relay nodes such that the sensors can transmit the sensed data to a nearby relay node, which in turn delivers the data to the base stations. In general, the relay node placement problems aim to meet certain connectivity and/or survivabil- ity requirements of the network by deploying a minimum number of relay nodes. The other approach is grouping sensor nodes into clusters with each cluster having a cluster head (CH. The CH nodes aggregate the data and transmit them to the base station (BS. These two approaches has been widely adopted by the research community to satisfy the scala- bility objective and generally achieve high energy efficiency and prolong network lifetime in large-scale WSN environments and hence are discussed here along with single hop and multi hop characteristic of sensor node.

  13. Pairwise graphical models for structural health monitoring with dense sensor arrays

    Science.gov (United States)

    Mohammadi Ghazi, Reza; Chen, Justin G.; Büyüköztürk, Oral

    2017-09-01

    Through advances in sensor technology and development of camera-based measurement techniques, it has become affordable to obtain high spatial resolution data from structures. Although measured datasets become more informative by increasing the number of sensors, the spatial dependencies between sensor data are increased at the same time. Therefore, appropriate data analysis techniques are needed to handle the inference problem in presence of these dependencies. In this paper, we propose a novel approach that uses graphical models (GM) for considering the spatial dependencies between sensor measurements in dense sensor networks or arrays to improve damage localization accuracy in structural health monitoring (SHM) application. Because there are always unobserved damaged states in this application, the available information is insufficient for learning the GMs. To overcome this challenge, we propose an approximated model that uses the mutual information between sensor measurements to learn the GMs. The study is backed by experimental validation of the method on two test structures. The first is a three-story two-bay steel model structure that is instrumented by MEMS accelerometers. The second experimental setup consists of a plate structure and a video camera to measure the displacement field of the plate. Our results show that considering the spatial dependencies by the proposed algorithm can significantly improve damage localization accuracy.

  14. Dense graphlet statistics of protein interaction and random networks.

    Science.gov (United States)

    Colak, R; Hormozdiari, F; Moser, F; Schönhuth, A; Holman, J; Ester, M; Sahinalp, S C

    2009-01-01

    Understanding evolutionary dynamics from a systemic point of view crucially depends on knowledge about how evolution affects size and structure of the organisms' functional building blocks (modules). It has been recently reported that statistics over sparse PPI graphlets can robustly monitor such evolutionary changes. However, there is abundant evidence that in PPI networks modules can be identified with highly interconnected (dense) and/or bipartite subgraphs. We count such dense graphlets in PPI networks by employing recently developed search strategies that render related inference problems tractable. We demonstrate that corresponding counting statistics differ significantly between prokaryotes and eukaryotes as well as between "real" PPI networks and scale free network emulators. We also prove that another class of emulators, the low-dimensional geometric random graphs (GRGs) cannot contain a specific type of motifs, complete bipartite graphs, which are abundant in PPI networks.

  15. Dense vibration measurement of an arch bridge before and after its seismic retrofit using wireless smart sensors

    Science.gov (United States)

    Nagayama, Tomonori; Urushima, Akihiko; Fujino, Yozo; Miyashita, Takeshi; Yoshioka, Tsutomu; Ieiri, Masataka

    2012-04-01

    Fundamental functionalities of wireless smart sensors to measure full-scale bridge vibration, such as time synchronization, loss-less multihop communication, and capability to capture small ambient vibrations, are maturing; dense vibration measurement of large structures using wireless smart sensors is expected to reveal the detailed condition of existing structures. An arch bridge is chosen as a target bridge and densely instrumented by 48 wireless smart sensors. Traffic induced vibration of the bridge has been measured before and after its seismic retrofit. The differences between the measured dynamic characteristics are considered to represent the effects of seismic retrofit. The dense measurement allows comparison of spatial characteristics such as detailed mode shapes, in addition to comparison of natural frequencies. Comparison of densely measured mode shapes reveals their changes, which are then used to update the finite element model of the bridge. The measurement, data analysis, and model updating indicate a potential use of dense instrumentation of wireless smart sensor network for structural condition assessment.

  16. Overspill avalanching in a dense reservoir network

    CERN Document Server

    Mamede, G L; Schneider, C M; de Araújo, J C; Herrmann, H J

    2012-01-01

    Sustainability of communities, agriculture, and industry is strongly dependent on an effective storage and supply of water resources. In some regions the economic growth has led to a level of water demand which can only be accomplished through efficient reservoir networks. Such infrastructures are not always planned at larger scale but rather made by farmers according to their local needs of irrigation during droughts. Based on extensive data from the upper Jaguaribe basin, one of the world's largest system of reservoirs, located in the Brazilian semiarid northeast, we reveal that surprisingly it self-organizes into a scale-free network exhibiting also a power-law in the distribution of the lakes and avalanches of discharges. With a new self-organized-criticality-type model we manage to explain the novel critical exponents. Implementing a flow model we are able to reproduce the measured overspill evolution providing a tool for catastrophe mitigation and future planning.

  17. Cooperative Handover Management in Dense Cellular Networks

    KAUST Repository

    Arshad, Rabe

    2017-02-07

    Network densification has always been an important factor to cope with the ever increasing capacity demand. Deploying more base stations (BSs) improves the spatial frequency utilization, which increases the network capacity. However, such improvement comes at the expense of shrinking the BSs\\' footprints, which increases the handover (HO) rate and may diminish the foreseen capacity gains. In this paper, we propose a cooperative HO management scheme to mitigate the HO effect on throughput gains achieved via cellular network densification. The proposed HO scheme relies on skipping HO to the nearest BS at some instances along the user\\'s trajectory while enabling cooperative BS service during HO execution at other instances. To this end, we develop a mathematical model, via stochastic geometry, to quantify the performance of the proposed HO scheme in terms of coverage probability and user throughput. The results show that the proposed cooperative HO scheme outperforms the always best connected based association at high mobility. Also, the value of BS cooperation along with handover skipping is quantified with respect to the HO skipping only that has recently appeared in the literature. Particularly, the proposed cooperative HO scheme shows throughput gains of 12% to 27% and 17% on average, when compared to the always best connected and HO skipping only schemes at user velocity ranging from 80 km/h to 160 Km/h, respectively.

  18. Sensor Management for Tracking in Sensor Networks

    CERN Document Server

    Fuemmeler, Jason A; Veeravalli, Venugopal V

    2010-01-01

    We study the problem of tracking an object moving through a network of wireless sensors. In order to conserve energy, the sensors may be put into a sleep mode with a timer that determines their sleep duration. It is assumed that an asleep sensor cannot be communicated with or woken up, and hence the sleep duration needs to be determined at the time the sensor goes to sleep based on all the information available to the sensor. Having sleeping sensors in the network could result in degraded tracking performance, therefore, there is a tradeoff between energy usage and tracking performance. We design sleeping policies that attempt to optimize this tradeoff and characterize their performance. As an extension to our previous work in this area [1], we consider generalized models for object movement, object sensing, and tracking cost. For discrete state spaces and continuous Gaussian observations, we derive a lower bound on the optimal energy-tracking tradeoff. It is shown that in the low tracking error regime, the g...

  19. An ontology for sensor networks

    Science.gov (United States)

    Compton, Michael; Neuhaus, Holger; Bermudez, Luis; Cox, Simon

    2010-05-01

    Sensors and networks of sensors are important ways of monitoring and digitizing reality. As the number and size of sensor networks grows, so too does the amount of data collected. Users of such networks typically need to discover the sensors and data that fit their needs without necessarily understanding the complexities of the network itself. The burden on users is eased if the network and its data are expressed in terms of concepts familiar to the users and their job functions, rather than in terms of the network or how it was designed. Furthermore, the task of collecting and combining data from multiple sensor networks is made easier if metadata about the data and the networks is stored in a format and conceptual models that is amenable to machine reasoning and inference. While the OGC's (Open Geospatial Consortium) SWE (Sensor Web Enablement) standards provide for the description and access to data and metadata for sensors, they do not provide facilities for abstraction, categorization, and reasoning consistent with standard technologies. Once sensors and networks are described using rich semantics (that is, by using logic to describe the sensors, the domain of interest, and the measurements) then reasoning and classification can be used to analyse and categorise data, relate measurements with similar information content, and manage, query and task sensors. This will enable types of automated processing and logical assurance built on OGC standards. The W3C SSN-XG (Semantic Sensor Networks Incubator Group) is producing a generic ontology to describe sensors, their environment and the measurements they make. The ontology provides definitions for the structure of sensors and observations, leaving the details of the observed domain unspecified. This allows abstract representations of real world entities, which are not observed directly but through their observable qualities. Domain semantics, units of measurement, time and time series, and location and mobility

  20. Handover management in dense cellular networks: A stochastic geometry approach

    KAUST Repository

    Arshad, Rabe

    2016-07-26

    Cellular operators are continuously densifying their networks to cope with the ever-increasing capacity demand. Furthermore, an extreme densification phase for cellular networks is foreseen to fulfill the ambitious fifth generation (5G) performance requirements. Network densification improves spectrum utilization and network capacity by shrinking base stations\\' (BSs) footprints and reusing the same spectrum more frequently over the spatial domain. However, network densification also increases the handover (HO) rate, which may diminish the capacity gains for mobile users due to HO delays. In highly dense 5G cellular networks, HO delays may neutralize or even negate the gains offered by network densification. In this paper, we present an analytical paradigm, based on stochastic geometry, to quantify the effect of HO delay on the average user rate in cellular networks. To this end, we propose a flexible handover scheme to reduce HO delay in case of highly dense cellular networks. This scheme allows skipping the HO procedure with some BSs along users\\' trajectories. The performance evaluation and testing of this scheme for only single HO skipping shows considerable gains in many practical scenarios. © 2016 IEEE.

  1. Unified broadcast in sensor networks

    DEFF Research Database (Denmark)

    Hansen, Morten Tranberg; Jurdak, Raja; Kusy, Branislav

    2011-01-01

    Complex sensor network applications include multiple services such as collection, dissemination, time synchronization, and failure detection protocols. Many of these protocols require local state maintenance through periodic broadcasts which leads to high control overhead. Recent attempts...

  2. Topological Fidelity in Sensor Networks

    OpenAIRE

    Chintakunta, Harish; Krim, Hamid

    2011-01-01

    Sensor Networks are inherently complex networks, and many of their associated problems require analysis of some of their global characteristics. These are primarily affected by the topology of the network. We present in this paper, a general framework for a topological analysis of a network, and develop distributed algorithms in a generalized combinatorial setting in order to solve two seemingly unrelated problems, 1) Coverage hole detection and Localization and 2) Worm hole attack detection ...

  3. Topological Fidelity in Sensor Networks

    OpenAIRE

    Chintakunta, Harish; Krim, Hamid

    2011-01-01

    Sensor Networks are inherently complex networks, and many of their associated problems require analysis of some of their global characteristics. These are primarily affected by the topology of the network. We present in this paper, a general framework for a topological analysis of a network, and develop distributed algorithms in a generalized combinatorial setting in order to solve two seemingly unrelated problems, 1) Coverage hole detection and Localization and 2) Worm hole attack detection ...

  4. Security in wireless sensor networks

    CERN Document Server

    Oreku, George S

    2016-01-01

    This monograph covers different aspects of sensor network security including new emerging technologies. The authors present a mathematical approach to the topic and give numerous practical examples as well as case studies to illustrate the theory. The target audience primarily comprises experts and practitioners in the field of sensor network security, but the book may also be beneficial for researchers in academia as well as for graduate students.

  5. Review Of Prevention Techniques For Denial Of Service DOS Attacks In Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Poonam Rolla

    2015-08-01

    Full Text Available Wireless Sensor Networks comprised of several tiny sensor nodes which are densely deployed over the region to monitor the environmental conditions. These sensor nodes have certain design issues out of which security is the main predominant factor as it effects the whole lifetime of network. DDoS Distributed denial of service attack floods unnecessary packets in the sensor network. A review on DDoS attacks and their prevention techniques have been done in this paper.

  6. Sensor Fusion-based Event Detection in Wireless Sensor Networks

    NARCIS (Netherlands)

    Bahrepour, M.; Meratnia, N.; Havinga, P.J.M.

    2009-01-01

    Recently, Wireless Sensor Networks (WSN) community has witnessed an application focus shift. Although, monitoring was the initial application of wireless sensor networks, in-network data processing and (near) real-time actuation capability have made wireless sensor networks suitable candidate for ev

  7. Wireless Sensor Networks for Healthcare Applications

    CERN Document Server

    Dishongh, Terrance J; Kuris, Ben

    2009-01-01

    This unique reference focuses on methods of application, validation and testing based on real deployments of sensor networks in the clinical and home environments. Key topics include healthcare and wireless sensors, sensor network applications, designs of experiments using sensors, data collection and decision making, clinical deployment of wireless sensor networks, contextual awareness medication prompting field trials in homes, social health monitoring, and the future of wireless sensor networks in healthcare.

  8. Medical Sensor Network Infrastructures

    DEFF Research Database (Denmark)

    Andersen, Jacob

    is required, such as taking a blood sample, mailing it to a lab, where it is analysed and the result returned by mail. Due to the continuing size and cost reduction of electronic equipment, future medical sensors will be much smaller, cheaper and often disposable. Furthermore, integration of these sensors...... with the electronic health record (EHR) IT-systems will save a lot of work (and human errors), as the sensor readings will be directly recorded in the patient’s records by the sensors themselves, rather than by a transcription performed by a busy clinician. Although this development has been going on for at least...... a decade, most sensors are still quite big, heavy and difficult to operate, and a lot of research is revolving around minimising the instruments and making them easier to use. Several research experiments have demonstrated the utility of such sensors, but few of these experiments consider security...

  9. Wireless sensor networks architectures and protocols

    CERN Document Server

    Callaway, Jr, Edgar H

    2003-01-01

    Introduction to Wireless Sensor NetworksApplications and MotivationNetwork Performance ObjectivesContributions of this BookOrganization of this BookThe Development of Wireless Sensor NetworksEarly Wireless NetworksWireless Data NetworksWireless Sensor and Related NetworksConclusionThe Physical LayerSome Physical Layer ExamplesA Practical Physical Layer for Wireless Sensor NetworksSimulations and ResultsConclusionThe Data Link LayerMedium Access Control TechniquesThe Mediation DeviceSystem Analysis and SimulationConclusionThe Network LayerSome Network Design ExamplesA Wireless Sensor Network De

  10. Introduction to wireless sensor networks

    CERN Document Server

    Forster, Anna

    2016-01-01

    Explores real-world wireless sensor network development, deployment, and applications. The book begins with an introduction to wireless sensor networks and their fundamental concepts. Hardware components, operating systems, protocols, and algorithms that make up the anatomy of a sensor node are described in chapter two. Properties of wireless communications, medium access protocols, wireless links, and link estimation protocols are described in chapter three and chapter four. Routing basics and metrics, clustering techniques, time synchronization and localization protocols, as well as sensing techniques are introduced in chapter five to nine. The concluding chapter summarizes the learnt methods and shows how to use them to deploy real-world sensor networks in a structured way.

  11. Wireless Sensor Network Based Smart Parking System

    National Research Council Canada - National Science Library

    Jeffrey Joseph; Roshan Gajanan Patil; Skanda Kumar Kaipu Narahari; Yogish Didagi; Jyotsna Bapat; Debabrata Das

    2014-01-01

    ... system. Wireless Sensor Networks are one such class of networks, which meet these criteria. These networks consist of spatially distributed sensor motes which work in a co-operative manner to sense and control the environment...

  12. Reliability Analysis of Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    JIN Yan; YANG Xiao-zong; WANG Ling

    2005-01-01

    To Integrate the capacity of sensing, communication, computing, and actuating, one of the compelling technological advances of these years has been the appearance of distributed wireless sensor network (DSN) for information gathering tasks. In order to save the energy, multi-hop routing between the sensor nodes and the sink node is necessary because of limited resource. In addition, the unpredictable conditional factors make the sensor nodes unreliable. In this paper, the reliability of routing designed for sensor network and some dependability issues of DSN, such as MTTF(mean time to failure) and the probability of connectivity between the sensor nodes and the sink node are analyzed.Unfortunately, we could not obtain the accurate result for the arbitrary network topology, which is # P-hard problem.And the reliability analysis of restricted topologies clustering-based is given. The method proposed in this paper will show us a constructive idea about how to place energyconstrained sensor nodes in the network efficiently from the prospective of reliability.

  13. Connectivity of Confined Dense Networks: Boundary Effects and Scaling Laws

    CERN Document Server

    Coon, Justin P; Georgiou, Orestis

    2012-01-01

    In this paper, we study the probability that a dense network confined within a given geometry is fully connected. We employ a cluster expansion approach often used in statistical physics to analyze the effects that the boundaries of the geometry have on connectivity. To maximize practicality and applicability, we adopt four important point-to-point link models based on outage probability in our analysis: single-input single-output (SISO), single-input multiple-output (SIMO), multiple-input single-output (MISO), and multiple-input multiple-output (MIMO). Furthermore, we derive diversity and power scaling laws that dictate how boundary effects can be mitigated (to leading order) in confined dense networks for each of these models. Finally, in order to demonstrate the versatility of our theory, we analyze boundary effects for dense networks comprising MIMO point-to-point links confined within a right prism, a polyhedron that accurately models many geometries that can be found in practice. We provide numerical re...

  14. Evolution of Force Networks in Dense Particulate Media

    CERN Document Server

    Kramar, Miroslav; Kondic, Lou; Mischaikow, Konstantin

    2014-01-01

    We introduce novel sets of measures with the goal of describing dynamical properties of force networks in dense particulate systems. The presented approach is based on persistent homology and allows for extracting precise, quantitative measures that describe the evolution of geometric features of the interparticle forces, without necessarily considering the details related to individual contacts between particles. The networks considered emerge from discrete element simulations of two dimensional particulate systems consisting of compressible frictional circular disks. We quantify the evolution of the networks for slowly compressed systems undergoing jamming transition. The main findings include uncovering significant but localized changes of force networks for unjammed systems, global (system-wide) changes as the systems evolve through jamming, to be followed by significantly less dramatic evolution for the jammed states. We consider both connected components, related in loose sense to force chains, and loop...

  15. Improving Dense Network Performance through Centralized Scheduling and Interference Coordination

    DEFF Research Database (Denmark)

    Lopez, Victor Fernandez; Pedersen, Klaus I.; Alvarez, Beatriz Soret

    2017-01-01

    . Interference management at the receiver is achieved through the use of a Network-Assisted Interference Cancellation and Suppression (NAICS) receiver. In order to further boost the 5th percentile user data rates, the transmission rank at the interferers is selectively reduced by a centralized rank coordination......Dense network deployments comprising small cells pose a series of important challenges when it comes to achieving an efficient resource use and curbing inter-cell interference in the downlink. This article examines different techniques to treat these problems in a dynamic way, from the network...... and the receiver sides. As a network coordination scheme, we apply a centralized joint cell association and scheduling mechanism based on dynamic cell switching, by which users are not always served by the strongest perceived cell. The method simultaneously resultsin more balanced loads and increased performance...

  16. Energy efficient sensor network implementations

    Energy Technology Data Exchange (ETDEWEB)

    Frigo, Janette R [Los Alamos National Laboratory; Raby, Eric Y [Los Alamos National Laboratory; Brennan, Sean M [Los Alamos National Laboratory; Kulathumani, Vinod [WEST VIRGINIA UNIV.; Rosten, Ed [CAMBRIDGE UNIV.; Wolinski, Christophe [IRISA; Wagner, Charles [IRISA; Charot, Francois [IRISA

    2009-01-01

    In this paper, we discuss a low power embedded sensor node architecture we are developing for distributed sensor network systems deployed in a natural environment. In particular, we examine the sensor node for energy efficient processing-at-the-sensor. We analyze the following modes of operation; event detection, sleep(wake-up), data acquisition, data processing modes using low power, high performance embedded technology such as specialized embedded DSP processors and a low power FPGAs at the sensing node. We use compute intensive sensor node applications: an acoustic vehicle classifier (frequency domain analysis) and a video license plate identification application (learning algorithm) as a case study. We report performance and total energy usage for our system implementations and discuss the system architecture design trade offs.

  17. Medical Sensor Network Infrastructures

    DEFF Research Database (Denmark)

    Andersen, Jacob

    is required, such as taking a blood sample, mailing it to a lab, where it is analysed and the result returned by mail. Due to the continuing size and cost reduction of electronic equipment, future medical sensors will be much smaller, cheaper and often disposable. Furthermore, integration of these sensors...... a short while. This tension between simple use and security in a low-power clinical environment is the main theme of this dissertation. Un-secure medical equipment will never pass official certification by national health authorities, but on the other hand, experience shows that if using the equipment...

  18. Sensor network architectures for monitoring underwater pipelines.

    Science.gov (United States)

    Mohamed, Nader; Jawhar, Imad; Al-Jaroodi, Jameela; Zhang, Liren

    2011-01-01

    This paper develops and compares different sensor network architecture designs that can be used for monitoring underwater pipeline infrastructures. These architectures are underwater wired sensor networks, underwater acoustic wireless sensor networks, RF (radio frequency) wireless sensor networks, integrated wired/acoustic wireless sensor networks, and integrated wired/RF wireless sensor networks. The paper also discusses the reliability challenges and enhancement approaches for these network architectures. The reliability evaluation, characteristics, advantages, and disadvantages among these architectures are discussed and compared. Three reliability factors are used for the discussion and comparison: the network connectivity, the continuity of power supply for the network, and the physical network security. In addition, the paper also develops and evaluates a hierarchical sensor network framework for underwater pipeline monitoring.

  19. Sensor Network Architectures for Monitoring Underwater Pipelines

    Directory of Open Access Journals (Sweden)

    Imad Jawhar

    2011-11-01

    Full Text Available This paper develops and compares different sensor network architecture designs that can be used for monitoring underwater pipeline infrastructures. These architectures are underwater wired sensor networks, underwater acoustic wireless sensor networks, RF (Radio Frequency wireless sensor networks, integrated wired/acoustic wireless sensor networks, and integrated wired/RF wireless sensor networks. The paper also discusses the reliability challenges and enhancement approaches for these network architectures. The reliability evaluation, characteristics, advantages, and disadvantages among these architectures are discussed and compared. Three reliability factors are used for the discussion and comparison: the network connectivity, the continuity of power supply for the network, and the physical network security. In addition, the paper also develops and evaluates a hierarchical sensor network framework for underwater pipeline monitoring.

  20. Analysis of coverage problem under border effects in wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    Jin Yan; Wang Ling; Yang Xiaozong; Wen Dongxin

    2008-01-01

    Wireless sensor networks can be used to monitor the interested region by deploying dense sensor nodes. Coverage is a primary metric to evaluate the capacity of monitoring. In this paper, we focus on the coverage problem under border effects, where the sensor nodes are distributed in a circle-shaped region randomly. Under this scenario, we derive the expected coverage of the sensor node and the total network coverage provided by n sensor nodes accurately by probability. These findings are useful to determine the related parameters (sensing range, number of sensor nodes and radius of monitored region) for a specific network coverage ratio. Simulation results demonstrate that our analysis is correct and effective.

  1. A Path Select Algorithm with Error Control Schemes and Energy Efficient Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sandeep Dahiya

    2012-04-01

    Full Text Available A wireless sensor network consists of a large number of sensor nodes that are spread densely to observe the phenomenon. The whole network lifetime relies on the lifetime of the each sensor node. If one node dies, it could lead to a separation of the sensor network. Also a multi hop structure and broadcast channel of wireless sensornecessitate error control scheme to achieve reliable data transmission. Automatic repeat request (ARQ and forward error correction (FEC are the key error control strategies in wire sensor network. In this paper we propose a path selection algorithm with error control schemes using energy efficient analysis.

  2. Topological Fidelity in Sensor Networks

    CERN Document Server

    Chintakunta, Harish

    2011-01-01

    Sensor Networks are inherently complex networks, and many of their associated problems require analysis of some of their global characteristics. These are primarily affected by the topology of the network. We present in this paper, a general framework for a topological analysis of a network, and develop distributed algorithms in a generalized combinatorial setting in order to solve two seemingly unrelated problems, 1) Coverage hole detection and Localization and 2) Worm hole attack detection and Localization. We also note these solutions remain coordinate free as no priori localization information of the nodes is assumed. For the coverage hole problem, we follow a "divide and conquer approach", by strategically dissecting the network so that the overall topology is preserved, while efficiently pursuing the detection and localization of failures. The detection of holes, is enabled by first attributing a combinatorial object called a "Rips Complex" to each network segment, and by subsequently checking the exist...

  3. Smart Body Sensor Object Networking

    Institute of Scientific and Technical Information of China (English)

    Bhumip Khasnabish

    2014-01-01

    This paper discusses smart body sensor objects (BSOs), including their networking and internetworking. Smartness can be incorpo-rated into BSOs by embedding virtualization, predictive analytics, and proactive computing and communications capabilities. A few use cases including the relevant privacy and protocol requirements are also presented. General usage and deployment eti-quette along with the relevant regulatory implications are then discussed.

  4. Mobile Zigbee Sensor Networks

    OpenAIRE

    Anantdeep, Er.; Kaur, Er. Sandeep; Kaur, Er. Balpreet

    2010-01-01

    OPNET Modeler accelerates network R&D and improves product quality through high-fidelity modeling and scalable simulation. It provides a virtual environment for designing protocols and devices, and for testing and demonstrating designs in realistic scenarios prior to production. OPNET Modeler supports 802.15.4 standard and has been used to make a model of PAN. Iterations have been performed by changing the Power of the transmitter and the throughput will has been analyzed to arrive at optimal...

  5. Communication Buses and Protocols for Sensor Networks

    Directory of Open Access Journals (Sweden)

    Andrew Mason

    2002-07-01

    Full Text Available This paper overviews existing digital communication buses which are commonly used in sensor networks, discusses sensor network architectures, and introduces a new sensor bus for low power microsystem applications. The new intra-module multi-element microsystem (IM2 bus is nine-line interface with 8b serial data which implements several advanced features such as power management and plug-n-play while maintaining minimum hardware overhead at the sensor node. Finally, some issues in wireless sensor networking are discussed. The coverage of these issues provides a guideline for choosing the appropriate bus for different sensor network applications.

  6. Environmental Monitoring Using Sensor Networks

    Science.gov (United States)

    Yang, J.; Zhang, C.; Li, X.; Huang, Y.; Fu, S.; Acevedo, M. F.

    2008-12-01

    Environmental observatories, consisting of a variety of sensor systems, computational resources and informatics, are important for us to observe, model, predict, and ultimately help preserve the health of the nature. The commoditization and proliferation of coin-to-palm sized wireless sensors will allow environmental monitoring with unprecedented fine spatial and temporal resolution. Once scattered around, these sensors can identify themselves, locate their positions, describe their functions, and self-organize into a network. They communicate through wireless channel with nearby sensors and transmit data through multi-hop protocols to a gateway, which can forward information to a remote data server. In this project, we describe an environmental observatory called Texas Environmental Observatory (TEO) that incorporates a sensor network system with intertwined wired and wireless sensors. We are enhancing and expanding the existing wired weather stations to include wireless sensor networks (WSNs) and telemetry using solar-powered cellular modems. The new WSNs will monitor soil moisture and support long-term hydrologic modeling. Hydrologic models are helpful in predicting how changes in land cover translate into changes in the stream flow regime. These models require inputs that are difficult to measure over large areas, especially variables related to storm events, such as soil moisture antecedent conditions and rainfall amount and intensity. This will also contribute to improve rainfall estimations from meteorological radar data and enhance hydrological forecasts. Sensor data are transmitted from monitoring site to a Central Data Collection (CDC) Server. We incorporate a GPRS modem for wireless telemetry, a single-board computer (SBC) as Remote Field Gateway (RFG) Server, and a WSN for distributed soil moisture monitoring. The RFG provides effective control, management, and coordination of two independent sensor systems, i.e., a traditional datalogger-based wired

  7. Dense String Networks and the One Scale Model with Friction

    CERN Document Server

    Aulakh, Charanjit S; Soni, V; Aulakh, Charanjit S.; Nagasawa, Michiyasu; Soni, Vikram

    1999-01-01

    We examine the behaviour of string networks with the initial string length densities ($ \\sim T_c^2$) and velocities ($ \\sim 1$) expected on the basis of the Kibble mechanism for string formation during a second order phase transition at $T_c$ in the context of the one scale model with friction. The inclusion of friction and use of the natural initial conditions modifies the current picture of string networks in a basic way.We find that a novel transient regime takes the initially dense and fast network to a sparse (string length density $\\sim T_c^3/M_P$) and slow ($v \\sim (T_c/M_P)^{1/2}$) state in a very short time $\\sim 0.1 t_c$ (where $t_c$ is the time of the phase transition that produces the strings). This allows it to join smoothly on to the well known Kibble Regime which prevails at late times in the friction dominated epoch (with the network scale $L\\sim t^{5/4}$ while the network r.m.s velocity $v \\sim t^{1/4}$) which requires initial conditions of this magnitude. Thus essentially irrespective of str...

  8. Mobile Zigbee Sensor Networks

    CERN Document Server

    Anantdeep, Er; Kaur, Er Balpreet

    2010-01-01

    OPNET Modeler accelerates network R&D and improves product quality through high-fidelity modeling and scalable simulation. It provides a virtual environment for designing protocols and devices, and for testing and demonstrating designs in realistic scenarios prior to production. OPNET Modeler supports 802.15.4 standard and has been used to make a model of PAN. Iterations have been performed by changing the Power of the transmitter and the throughput will has been analyzed to arrive at optimal values.An energy-efficient wireless home network based on IEEE 802.15.4, a novel architecture has been proposed. In this architecture, all nodes are classified into stationary nodes and mobile nodes according to the functionality of each node. Mobile nodes are usually battery-powered, and therefore need low-power operation. In order to improve power consumption of mobile nodes, effective handover sequence based on MAC broadcast and transmission power control based on LQ (link quality) are employed. Experimental resul...

  9. Efficient Vector-Based Forwarding for Underwater Sensor Networks

    Directory of Open Access Journals (Sweden)

    Peng Xie

    2010-01-01

    Full Text Available Underwater Sensor Networks (UWSNs are significantly different from terrestrial sensor networks in the following aspects: low bandwidth, high latency, node mobility, high error probability, and 3-dimensional space. These new features bring many challenges to the network protocol design of UWSNs. In this paper, we tackle one fundamental problem in UWSNs: robust, scalable, and energy efficient routing. We propose vector-based forwarding (VBF, a geographic routing protocol. In VBF, the forwarding path is guided by a vector from the source to the target, no state information is required on the sensor nodes, and only a small fraction of the nodes is involved in routing. To improve the robustness, packets are forwarded in redundant and interleaved paths. Further, a localized and distributed self-adaptation algorithm allows the nodes to reduce energy consumption by discarding redundant packets. VBF performs well in dense networks. For sparse networks, we propose a hop-by-hop vector-based forwarding (HH-VBF protocol, which adapts the vector-based approach at every hop. We evaluate the performance of VBF and HH-VBF through extensive simulations. The simulation results show that VBF achieves high packet delivery ratio and energy efficiency in dense networks and HH-VBF has high packet delivery ratio even in sparse networks.

  10. Distributed Algorithms in Wireless Sensor Networks

    NARCIS (Netherlands)

    Nieberg, Tim; Broersma, Hajo; Faigle, Ulrich; Hurink, Johann; Pickl, Stefan; Woeginger, Gerhard

    2003-01-01

    Wireless sensor networks (WSNs) are an emerging field of research which combines many challenges in distributed computing and network optimization. One important goal is to improve the functional lifetime of the sensor network using energy-efficient distributed algorithms, networking and routing tec

  11. Cooperative robots and sensor networks

    CERN Document Server

    Khelil, Abdelmajid

    2014-01-01

    Mobile robots and Wireless Sensor Networks (WSNs) have enabled great potentials and a large space for ubiquitous and pervasive applications. Robotics and WSNs have mostly been considered as separate research fields and little work has investigated the marriage between these two technologies. However, these two technologies share several features, enable common cyber-physical applications and provide complementary support to each other.
 The primary objective of book is to provide a reference for cutting-edge studies and research trends pertaining to robotics and sensor networks, and in particular for the coupling between them. The book consists of five chapters. The first chapter presents a cooperation strategy for teams of multiple autonomous vehicles to solve the rendezvous problem. The second chapter is motivated by the need to improve existing solutions that deal with connectivity prediction, and proposed a genetic machine learning approach for link-quality prediction. The third chapter presents an arch...

  12. Networked unattented ground sensors assesment

    Science.gov (United States)

    Bouguereau, Julien; Gattefin, Christian; Dupuy, Gilles

    2003-09-01

    Within the framework of the NATO AC 323 / RTO TG 25 group, relating to advanced concepts of acoustic and seismic technology for military applications, Technical Establishment of Bourges welcomed and organized a joint campaign of experiment intending to demonstrate the interest of a networked unattented ground sensors for vehicles detection and tracking in an area defense context. Having reminded the principle of vehicles tracking, this paper describes the progress of the test campaign and details particularly sensors and participants deployment, the solution of interoperability chosen by the group and the instrumentation used to acquire, network, process and publish in real-time data available during the test: meteorological data, trajectography data and targets detection reports data. Finally, some results of the campaign are presented.

  13. Unified broadcast in sensor networks

    DEFF Research Database (Denmark)

    Hansen, Morten Tranberg; Jurdak, Raja; Kusy, Branislav

    2011-01-01

    to consolidate these broadcasts focus on piggybacking information into existing services but such tight coupling between protocols limits code reuse and interoperability of applications. We present Unified Broadcast (UB) which combines broadcasts from multiple protocols while maintaining a modular architecture......Complex sensor network applications include multiple services such as collection, dissemination, time synchronization, and failure detection protocols. Many of these protocols require local state maintenance through periodic broadcasts which leads to high control overhead. Recent attempts...

  14. Resilient networking in wireless sensor networks

    CERN Document Server

    Erdene-Ochir, Ochirkhand; Valois, Fabrice; Kountouris, Apostolos

    2010-01-01

    This report deals with security in wireless sensor networks (WSNs), especially in network layer. Multiple secure routing protocols have been proposed in the literature. However, they often use the cryptography to secure routing functionalities. The cryptography alone is not enough to defend against multiple attacks due to the node compromise. Therefore, we need more algorithmic solutions. In this report, we focus on the behavior of routing protocols to determine which properties make them more resilient to attacks. Our aim is to find some answers to the following questions. Are there any existing protocols, not designed initially for security, but which already contain some inherently resilient properties against attacks under which some portion of the network nodes is compromised? If yes, which specific behaviors are making these protocols more resilient? We propose in this report an overview of security strategies for WSNs in general, including existing attacks and defensive measures. In this report we focu...

  15. Data Architecture for Sensor Network

    Directory of Open Access Journals (Sweden)

    Jan Ježek

    2012-03-01

    Full Text Available Fast development of hardware in recent years leads to the high availability of simple sensing devices at minimal cost. As a consequence, there is many of sensor networks nowadays. These networks can continuously produce a large amount of observed data including the location of measurement. Optimal data architecture for such propose is a challenging issue due to its large scale and spatio-temporal nature.  The aim of this paper is to describe data architecture that was used in a particular solution for storage of sensor data. This solution is based on relation data model – concretely PostgreSQL and PostGIS. We will mention out experience from real world projects focused on car monitoring and project targeted on agriculture sensor networks. We will also shortly demonstrate the possibilities of client side API and the potential of other open source libraries that can be used for cartographic visualization (e.g. GeoServer. The main objective is to describe the strength and weakness of usage of relation database system for such propose and to introduce also alternative approaches based on NoSQL concept.

  16. Algorithms for energy efficient data extraction from wireless sensor networks for environmental monitoring applications

    NARCIS (Netherlands)

    Chatterjea, S.; Havinga, P.J.M.; Kooistra, L.; Ligtenberg, A.

    2008-01-01

    Wireless sensor networks (WSNs) can provide high resolution spatial and temporal data for environmental applications if they are densely deployed. However, as the nodes which make up the network are typically battery operated, a major problem faced by WSNs is limited network lifetime. In order to ex

  17. Hybrid architecture for building secure sensor networks

    Science.gov (United States)

    Owens, Ken R., Jr.; Watkins, Steve E.

    2012-04-01

    Sensor networks have various communication and security architectural concerns. Three approaches are defined to address these concerns for sensor networks. The first area is the utilization of new computing architectures that leverage embedded virtualization software on the sensor. Deploying a small, embedded virtualization operating system on the sensor nodes that is designed to communicate to low-cost cloud computing infrastructure in the network is the foundation to delivering low-cost, secure sensor networks. The second area focuses on securing the sensor. Sensor security components include developing an identification scheme, and leveraging authentication algorithms and protocols that address security assurance within the physical, communication network, and application layers. This function will primarily be accomplished through encrypting the communication channel and integrating sensor network firewall and intrusion detection/prevention components to the sensor network architecture. Hence, sensor networks will be able to maintain high levels of security. The third area addresses the real-time and high priority nature of the data that sensor networks collect. This function requires that a quality-of-service (QoS) definition and algorithm be developed for delivering the right data at the right time. A hybrid architecture is proposed that combines software and hardware features to handle network traffic with diverse QoS requirements.

  18. Experimental study of thin film sensor networks for wind turbine blade damage detection

    Science.gov (United States)

    Downey, A.; Laflamme, S.; Ubertini, F.; Sauder, H.; Sarkar, P.

    2017-02-01

    Damage detection of wind turbine blades is difficult due to their complex geometry and large size, for which large deployment of sensing systems is typically not economical. A solution is to develop and deploy dedicated sensor networks fabricated from inexpensive materials and electronics. The authors have recently developed a novel skin-type strain gauge for measuring strain over very large surfaces. The skin, a type of large-area electronics, is constituted from a network of soft elastomeric capacitors. The sensing system is analogous to a biological skin, where local strain can be monitored over a global area. In this paper, we propose the utilization of a dense network of soft elastomeric capacitors to detect, localize, and quantify damage on wind turbine blades. We also leverage mature off-the-shelf technologies, in particular resistive strain gauges, to augment such dense sensor network with high accuracy data at key locations, therefore constituting a hybrid dense sensor network. The proposed hybrid dense sensor network is installed inside a wind turbine blade model, and tested in a wind tunnel to simulate an operational environment. Results demonstrate the ability of the hybrid dense sensor network to detect, localize, and quantify damage.

  19. Application Independent Energy Efficient Data Aggregation in Wireless Sensor Networks

    CERN Document Server

    Virmani, Deepali; Ghanshyam,; Ahlawat, Khyati; Noble,

    2012-01-01

    Wireless Sensor networks are dense networks of small, low-cost sensors, which collect and disseminate environmental data and thus facilitate monitoring and controlling of physical environment from remote locations with better accuracy. The major challenge is to achieve energy efficiency during the communication among the nodes. This paper aims at proposing a solution to schedule the node's activities to reduce the energy consumption. We propose the construction of a decentralized lifetime maximizing tree within clusters. We aim at minimizing the distance of transmission with minimization of energy consumption. The sensor network is distributed into clusters based on the close proximity of the nodes. Data transfer among the nodes is done with a hybrid technique of both TDMA/ FDMA which leads to efficient utilization of bandwidth and maximizing throughput.

  20. Fixed SMRF Sensor Network Application Concepts

    NARCIS (Netherlands)

    Wit, J.J.M. de; Rossum, W.L. van; Smits, F.M.A.; Theije, P.A.M. de; Monni, S.; Huizing, A.G.

    2010-01-01

    Advantages of scalable multifunction RF (SMRF) sensors and networked operation of sensors are well-known. Some advantages are surveillance persistence, multipath resistance, and interference resistance. The particular benefits of applying multifunction RF sensors in a network still need to be studie

  1. Fixed SMRF Sensor Network Application Concepts

    NARCIS (Netherlands)

    Wit, J.J.M. de; Rossum, W.L. van; Smits, F.M.A.; Theije, P.A.M. de; Monni, S.; Huizing, A.G.

    2010-01-01

    Advantages of scalable multifunction RF (SMRF) sensors and networked operation of sensors are well-known. Some advantages are surveillance persistence, multipath resistance, and interference resistance. The particular benefits of applying multifunction RF sensors in a network still need to be studie

  2. Energy-Harvesting Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Fafoutis, Xenofon; Vuckovic, Dusan; Di Mauro, Alessio

    2012-01-01

    Energy Harvesting comprises a promising solution to one of the key problems faced by battery-powered Wireless Sensor Networks, namely the limited nature of the energy supply (finite battery capacity). By harvesting energy from the surrounding environment, the sensors can have a continuous lifetime...... Sensor Networks with energy harvesting capability....

  3. Decentralized System Identification Using Stochastic Subspace Identification for Wireless Sensor Networks

    OpenAIRE

    2015-01-01

    Wireless sensor networks (WSNs) facilitate a new paradigm to structural identification and monitoring for civil infrastructure. Conventional structural monitoring systems based on wired sensors and centralized data acquisition systems are costly for installation as well as maintenance. WSNs have emerged as a technology that can overcome such difficulties, making deployment of a dense array of sensors on large civil structures both feasible and economical. However, as opposed to wired sensor n...

  4. Adaptive Probabilistic Broadcasting over Dense Wireless Ad Hoc Networks

    Directory of Open Access Journals (Sweden)

    Victor Gau

    2010-01-01

    Full Text Available We propose an idle probability-based broadcasting method, iPro, which employs an adaptive probabilistic mechanism to improve performance of data broadcasting over dense wireless ad hoc networks. In multisource one-hop broadcast scenarios, the modeling and simulation results of the proposed iPro are shown to significantly outperform the standard IEEE 802.11 under saturated condition. Moreover, the results also show that without estimating the number of competing nodes and changing the contention window size, the performance of the proposed iPro can still approach the theoretical bound. We further apply iPro to multihop broadcasting scenarios, and the experiment results show that within the same elapsed time after the broadcasting, the proposed iPro has significantly higher Packet-Delivery Ratios (PDR than traditional methods.

  5. Competition at the Wireless Sensor Network MAC Layer: Low Power Probing interfering with X-MAC

    Science.gov (United States)

    Zacharias, Sven; Newe, Thomas

    2011-08-01

    Wireless Sensor Networks (WSNs) combine sensors with computer networks and enable very dense, in-situ and live measurements of data over a large area. Since this emerging technology has the potential to be embedded almost everywhere for numberless applications, interference between different networks can become a serious issue. For most WSNs, it is assumed today that the network medium access is non-competitive. On the basis of X-MAC interfered by Low Power Probing, this paper shows the danger and the effects of different sensor networks communicating on a single wireless channel of the 2.4 GHz band, which is used by the IEEE 802.15.4 standard.

  6. Integration of RFID and Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    Miodrag; Bolic; Amiya; Nayak; Ivan; Stojmenovi.

    2007-01-01

    Radio Frequency Identification (RFID) and Wireless Sensor Network (WSN) are two important wireless technologies that have wide variety of applications and provide limitless future potentials. However,RFID and sensor networks almost are under development in parallel way. Integration of RFID and wireless sensor networks attracts little attention from research community. This paper first presents a brief introduction on RFID,and then investigates recent research works,new products/patents and applications that integrate RFID with sensor networks. Four types of integration are discussed. They are integrating tags with sensors,integrating tags with wireless sensor nodes,integrating readers with wireless sensor nodes and wire-less devices,and mix of RFID and sensors. New challenges and future works are discussed in the end.

  7. Wireless sensor networks in a maritime environment.

    NARCIS (Netherlands)

    Kavelaars, W.; Maris, M.

    2005-01-01

    In the recent years, there has been a lot of research on sensor networks-and their applications. In particular for monitoring large and potentially hostile areas these networks have proven to be very useful. The technique of land-based sensor networks can be extrapolated to sensing buoys at sea or i

  8. The art of wireless sensor networks

    CERN Document Server

    2014-01-01

    During the last one and a half decades, wireless sensor networks have witnessed significant growth and tremendous development in both academia and industry.   “The Art of Wireless Sensor Networks: Volume 1: Fundamentals” focuses on the fundamentals concepts in the design, analysis, and implementation of wireless sensor networks. It covers the various layers of the lifecycle of this type of network from the physical layer up to the application layer. Its rationale is that the first volume covers contemporary design issues, tools, and protocols for radio-based two-dimensional terrestrial sensor networks. All the book chapters in this volume include up-to-date research work spanning various classic facets of the physical properties and functional behavior of wireless sensor networks, including physical layer, medium access control, data routing, topology management, mobility management, localization, task management, data management, data gathering, security, middleware, sensor technology, standards, and ...

  9. Observing the Unobservable - Distributed Online Outlier Detection in Wireless Sensor Networks

    NARCIS (Netherlands)

    Zhang, Y.

    2010-01-01

    The generation of wireless sensor networks (WSNs) makes human beings observe and reason about the physical environment better, easier, and faster. The wireless sensor nodes equipped with sensing, processing, wireless communication and actuation capabilities can be densely deployed in a wide

  10. Observing the Unobservable - Distributed Online Outlier Detection in Wireless Sensor Networks

    NARCIS (Netherlands)

    Zhang, Y.

    2010-01-01

    The generation of wireless sensor networks (WSNs) makes human beings observe and reason about the physical environment better, easier, and faster. The wireless sensor nodes equipped with sensing, processing, wireless communication and actuation capabilities can be densely deployed in a wide geograph

  11. Collaborative Clustering for Sensor Networks

    Science.gov (United States)

    Wagstaff. Loro :/; Green Jillian; Lane, Terran

    2011-01-01

    Traditionally, nodes in a sensor network simply collect data and then pass it on to a centralized node that archives, distributes, and possibly analyzes the data. However, analysis at the individual nodes could enable faster detection of anomalies or other interesting events, as well as faster responses such as sending out alerts or increasing the data collection rate. There is an additional opportunity for increased performance if individual nodes can communicate directly with their neighbors. Previously, a method was developed by which machine learning classification algorithms could collaborate to achieve high performance autonomously (without requiring human intervention). This method worked for supervised learning algorithms, in which labeled data is used to train models. The learners collaborated by exchanging labels describing the data. The new advance enables clustering algorithms, which do not use labeled data, to also collaborate. This is achieved by defining a new language for collaboration that uses pair-wise constraints to encode useful information for other learners. These constraints specify that two items must, or cannot, be placed into the same cluster. Previous work has shown that clustering with these constraints (in isolation) already improves performance. In the problem formulation, each learner resides at a different node in the sensor network and makes observations (collects data) independently of the other learners. Each learner clusters its data and then selects a pair of items about which it is uncertain and uses them to query its neighbors. The resulting feedback (a must and cannot constraint from each neighbor) is combined by the learner into a consensus constraint, and it then reclusters its data while incorporating the new constraint. A strategy was also proposed for cleaning the resulting constraint sets, which may contain conflicting constraints; this improves performance significantly. This approach has been applied to collaborative

  12. Contemporary Developments in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sangeeta Mittal

    2012-04-01

    Full Text Available Wireless Sensor Networks (WSN since their inception, a decade ago, have grown well in research and implementation. In this work the developments in WSNs are reported in three sub areas of wireless sensor networks that is, wireless sensor node (hardware and software, Communication & Networking issues in WSNs and application areas. WSNs are characterized by huge data hence research work in aggregation & mining is also discussed. Contemporary issues of integration of WSNs with other prevalent networks, sensor enabled smartness and role of artificial intelligence methods is elaborated. Insight into future directions & research avenues in all the above areas is provided

  13. Sensor Activation and Radius Adaptation (SARA) in Heterogeneous Sensor Networks

    CERN Document Server

    Bartolini, Novella; la Porta, Thomas; Petrioli, Chiara; Silvestri, Simone

    2010-01-01

    In this paper we address the problem of prolonging the lifetime of wireless sensor networks (WSNs) deployed to monitor an area of interest. In this scenario, a helpful approach is to reduce coverage redundancy and therefore the energy expenditure due to coverage. We introduce the first algorithm which reduces coverage redundancy by means of Sensor Activation and sensing Radius Adaptation (SARA)in a general applicative scenario with two classes of devices: sensors that can adapt their sensing range (adjustable sensors) and sensors that cannot (fixed sensors). In particular, SARA activates only a subset of all the available sensors and reduces the sensing range of the adjustable sensors that have been activated. In doing so, SARA also takes possible heterogeneous coverage capabilities of sensors belonging to the same class into account. It specifically addresses device heterogeneity by modeling the coverage problem in the Laguerre geometry through Voronoi-Laguerre diagrams. SARA executes quickly and is guarante...

  14. Intelligent sensor networks the integration of sensor networks, signal processing and machine learning

    CERN Document Server

    Hu, Fei

    2012-01-01

    Although governments worldwide have invested significantly in intelligent sensor network research and applications, few books cover intelligent sensor networks from a machine learning and signal processing perspective. Filling this void, Intelligent Sensor Networks: The Integration of Sensor Networks, Signal Processing and Machine Learning focuses on the close integration of sensing, networking, and smart signal processing via machine learning. Based on the world-class research of award-winning authors, the book provides a firm grounding in the fundamentals of intelligent sensor networks, incl

  15. Wireless Sensor Networks TestBed: ASNTbed

    CSIR Research Space (South Africa)

    Dludla, AG

    2013-05-01

    Full Text Available Wireless sensor networks (WSNs) have been used in different types of applications and deployed within various environments. Simulation tools are essential for studying WSNs, especially for exploring large-scale networks. However, WSN testbeds...

  16. Sybil attack in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Abirami.K

    2013-04-01

    Full Text Available Wireless network is very susceptible to different types of attack. The main attack is Sybil attack, which allows forming other attacks on the network. Security is very important to the wireless network. In wireless sensor network, to verify node identities by cryptographic authentication but this is not easy because sensor node which contains limited resources. Therefore the current research is going on how to handling the situation of different traffic levels and transmission power for security.

  17. Clustering-based interference management in densely deployed femtocell networks

    Directory of Open Access Journals (Sweden)

    Jingyi Dai

    2016-11-01

    Full Text Available Deploying femtocells underlaying macrocells is a promising way to improve the capacity and enhance the coverage of a cellular system. However, densely deployed femtocells in urban area also give rise to intra-tier interference and cross-tier issue that should be addressed properly in order to acquire the expected performance gain. In this paper, we propose an interference management scheme based on joint clustering and resource allocation for two-tier Orthogonal Frequency Division Multiplexing (OFDM-based femtocell networks. We formulate an optimization task with the objective of maximizing the sum throughput of the femtocell users (FUs under the consideration of intra-tier interference mitigation, while controlling the interference to the macrocell user (MU under its bearable threshold. The formulation problem is addressed by a two-stage procedure: femtocells clustering and resource allocation. First, disjoint femtocell clusters with dynamic sizes and numbers are generated to minimize intra-tier interference. Then each cluster is taken as a resource allocation unit to share all subchannels, followed by a fast algorithm to distribute power among these subchannels. Simulation results show that our proposed schemes can improve the throughput of the FUs with acceptable complexity.

  18. On the Virtual Cell Transmission in Ultra Dense Networks

    Directory of Open Access Journals (Sweden)

    Xiaopeng Zhu

    2016-10-01

    Full Text Available Ultra dense networks (UDN are identified as one of the key enablers for 5G, since they can provide an ultra high spectral reuse factor exploiting proximal transmissions. By densifying the network infrastructure equipment, it is highly possible that each user will have one or more dedicated serving base station antennas, introducing the user-centric virtual cell paradigm. However, due to irregular deployment of a large amount of base station antennas, the interference environment becomes rather complex, thus introducing severe interferences among different virtual cells. This paper focuses on the downlink transmission scheme in UDN where a large number of users and base station antennas is uniformly spread over a certain area. An interference graph is first created based on the large-scale fadings to give a potential description of the interference relationship among the virtual cells. Then, base station antennas and users in the virtual cells within the same maximally-connected component are grouped together and merged into one new virtual cell cluster, where users are jointly served via zero-forcing (ZF beamforming. A multi-virtual-cell minimum mean square error precoding scheme is further proposed to mitigate the inter-cluster interference. Additionally, the interference alignment framework is proposed based on the low complexity virtual cell merging to eliminate the strong interference between different virtual cells. Simulation results show that the proposed interference graph-based virtual cell merging approach can attain the average user spectral efficiency performance of the grouping scheme based on virtual cell overlapping with a smaller virtual cell size and reduced signal processing complexity. Besides, the proposed user-centric transmission scheme greatly outperforms the BS-centric transmission scheme (maximum ratio transmission (MRT in terms of both the average user spectral efficiency and edge user spectral efficiency. What is more

  19. Source positioning in a large-scale tiny-sensor network of arbitrary topology

    NARCIS (Netherlands)

    Penkin, D.; Janssen, G.J.M.; Yarovoy, A.

    2014-01-01

    To effectively localise a source node in a dense wireless tiny-sensor network with an arbitrary 2D/3D node distribution, a novel approach suitable to describe the hop progress of source-to-sink path in such a system is proposed. In this approach, the network topology is described as a regular lattic

  20. Mathematical theories of distributed sensor networks

    CERN Document Server

    Iyengar, Sitharama S; Balakrishnan, N

    2014-01-01

    Mathematical Theory of Distributed Sensor Networks demonstrates how mathematical theories can be used to provide distributed sensor modeling and to solve important problems such as coverage hole detection and repair. The book introduces the mathematical and computational structure by discussing what they are, their applications and how they differ from traditional systems. The text also explains how mathematics are utilized to provide efficient techniques implementing effective coverage, deployment, transmission, data processing, signal processing, and data protection within distributed sensor networks. Finally, the authors discuss some important challenges facing mathematics to get more incite to the multidisciplinary area of distributed sensor networks.

  1. Wireless Sensor Networks: Opportunities and Challenges

    Directory of Open Access Journals (Sweden)

    Matthew N. O. Sadiku

    2014-01-01

    Full Text Available The popularity of cell phones, laptops, PDAs and intelligent electronics has made computing devices to become cheaper and more pervasive in daily life. The desire for connectivity among these devices has caused an exponential growth in wireless communication. Wireless sensor networks (WSNs provide an example of this phenomenon. WSNs belong to the general family of sensor networks that employ distributed sensors to collect information on entities of interest. This paper provides a brief introduction to wireless sensor networks. It addresses the opportunities and challenges of WSNs

  2. Multiple Sink Positioning and Routing to Maximize the Lifetime of Sensor Networks

    Science.gov (United States)

    Kim, Haeyong; Kwon, Taekyoung; Mah, Pyeongsoo

    In wireless sensor networks, the sensor nodes collect data, which are routed to a sink node. Most of the existing proposals address the routing problem to maximize network lifetime in the case of a single sink node. In this paper, we extend this problem into the case of multiple sink nodes. To maximize network lifetime, we consider the two problems: (i) how to position multiple sink nodes in the area, and (ii) how to route traffic flows from sensor nodes to sink nodes. In this paper, the solutions to these problems are formulated into a Mixed Integer Linear Programming (MILP) model. However, it is computationally difficult to solve the MILP formulation as the size of sensor network grows because MILP is NP-hard. Thus, we propose a heuristic algorithm, which produces a solution in polynomial time. From our experiments, we found out that the proposed heuristic algorithm provides a near-optimal solution for maximizing network lifetime in dense sensor networks.

  3. Noncommutative Lightweight Signcryption for Wireless Sensor Networks

    OpenAIRE

    Lize Gu; Yun Pan; Mianxiong Dong; Kaoru Ota

    2013-01-01

    Key management techniques for secure wireless-sensor-networks-based applications must minimally incorporate confidentiality, authenticity, integrity, scalability, and flexibility. Signcryption is the proper primitive to do this. However, existing signcryption schemes are heavyweight and not suitable for resource-limited sensors. In this paper, we at first propose a braid-based signcryption scheme and then develop a key establishment protocol for wireless sensor networks. From the complexity v...

  4. Cooperative robots and sensor networks 2014

    CERN Document Server

    Khelil, Abdelmajid

    2014-01-01

    This book is the second volume on Cooperative Robots and Sensor Networks. The primary objective of this book is to provide an up-to-date reference for cutting-edge studies and research trends related to mobile robots and wireless sensor networks, and in particular for the coupling between them. Indeed, mobile robots and wireless sensor networks have enabled great potentials and a large space for ubiquitous and pervasive applications. Robotics and wireless sensor networks have mostly been considered as separate research fields and little work has investigated the marriage between these two technologies. However, these two technologies share several features, enable common cyber-physical applications and provide complementary support to each other. The book consists of ten chapters, organized into four parts. The first part of the book presents three chapters related to localization of mobile robots using wireless sensor networks. Two chapters presented new solutions based Extended Kalman Filter and Particle Fi...

  5. On computer vision in wireless sensor networks.

    Energy Technology Data Exchange (ETDEWEB)

    Berry, Nina M.; Ko, Teresa H.

    2004-09-01

    Wireless sensor networks allow detailed sensing of otherwise unknown and inaccessible environments. While it would be beneficial to include cameras in a wireless sensor network because images are so rich in information, the power cost of transmitting an image across the wireless network can dramatically shorten the lifespan of the sensor nodes. This paper describe a new paradigm for the incorporation of imaging into wireless networks. Rather than focusing on transmitting images across the network, we show how an image can be processed locally for key features using simple detectors. Contrasted with traditional event detection systems that trigger an image capture, this enables a new class of sensors which uses a low power imaging sensor to detect a variety of visual cues. Sharing these features among relevant nodes cues specific actions to better provide information about the environment. We report on various existing techniques developed for traditional computer vision research which can aid in this work.

  6. Energy optimization in mobile sensor networks

    Science.gov (United States)

    Yu, Shengwei

    Mobile sensor networks are considered to consist of a network of mobile robots, each of which has computation, communication and sensing capabilities. Energy efficiency is a critical issue in mobile sensor networks, especially when mobility (i.e., locomotion control), routing (i.e., communications) and sensing are unique characteristics of mobile robots for energy optimization. This thesis focuses on the problem of energy optimization of mobile robotic sensor networks, and the research results can be extended to energy optimization of a network of mobile robots that monitors the environment, or a team of mobile robots that transports materials from stations to stations in a manufacturing environment. On the energy optimization of mobile robotic sensor networks, our research focuses on the investigation and development of distributed optimization algorithms to exploit the mobility of robotic sensor nodes for network lifetime maximization. In particular, the thesis studies these five problems: 1. Network-lifetime maximization by controlling positions of networked mobile sensor robots based on local information with distributed optimization algorithms; 2. Lifetime maximization of mobile sensor networks with energy harvesting modules; 3. Lifetime maximization using joint design of mobility and routing; 4. Optimal control for network energy minimization; 5. Network lifetime maximization in mobile visual sensor networks. In addressing the first problem, we consider only the mobility strategies of the robotic relay nodes in a mobile sensor network in order to maximize its network lifetime. By using variable substitutions, the original problem is converted into a convex problem, and a variant of the sub-gradient method for saddle-point computation is developed for solving this problem. An optimal solution is obtained by the method. Computer simulations show that mobility of robotic sensors can significantly prolong the lifetime of the whole robotic sensor network while

  7. A Tree-Based Data Collecting Network Structure for Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    Chi-Tsun Cheng; Chi K. Tse; Francis C. M. Lau

    2008-01-01

    In a sensor network with a large number of densely populated sensor nodes, a single target of interest may be detected by multiple sensor nodes simultaneously. Data collected from the sensor nodes are usually highly correlated, and hence energy saving using in-network data fusion becomes possible. A traditional data fusion scheme starts with dividing the network into clusters, followed by electing a sensor node as cluster head in each cluster. A cluster head is responsible for collecting data from all its cluster members, performing data fusion on these data and transmitting the fused data to the base station. Assuming that a sensor node is only capable of handling a single node-to-node transmission at a time and each transmission takes T time-slots, a cluster head with n cluster members will take at least Nt time-slots to collect data from all its cluster members. In this paper, a tree-based network structure and its formation algorithms are proposed. Simulation results show that the proposed network structure can greatly reduce the delay in data collection.

  8. A Tree-Based Data Collecting Network Structure for Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    Chi-Tsun Cheng; Chi K. Tse; Francis C. M. Lau

    2008-01-01

    In a sensor network with a large numberof densely populated sensor nodes, a single target ofinterest may be detected by multiple sensor nodessimultaneously. Data collected from the sensor nodes areusually highly correlated, and hence energy saving usingin-network data fusion becomes possible. A traditionaldata fusion scheme starts with dividing the network intoclusters, followed by electing a sensor node as clusterhead in each cluster. A cluster head is responsible forcollecting data from all its cluster members, performingdata fusion on these data and transmitting the fused datato the base station. Assuming that a sensor node is onlycapable of handling a single node-to-node transmissionat a time and each transmission takes T time-slots, acluster head with n cluster members will take at least nTtime-slots to collect data from all its cluster members. Inthis paper, a tree-based network structure and itsformation algorithms are proposed. Simulation resultsshow that the proposed network structure can greatlyreduce the delay in data collection.

  9. Time-domain fiber loop ringdown sensor and sensor network

    Science.gov (United States)

    Kaya, Malik

    Optical fibers have been mostly used in fiber optic communications, imaging optics, sensing technology, etc. Fiber optic sensors have gained increasing attention for scientific and structural health monitoring (SHM) applications. In this study, fiber loop ringdown (FLRD) sensors were fabricated for scientific, SHM, and sensor networking applications. FLRD biosensors were fabricated for both bulk refractive index (RI)- and surface RI-based DNA sensing and one type of bacteria sensing. Furthermore, the effect of glucose oxidase (GOD) immobilization at the sensor head on sensor performance was evaluated for both glucose and synthetic urine solutions with glucose concentration between 0.1% and 10%. Detection sensitivities of the glucose sensors were achieved as low as 0.05%. For chemical sensing, heavy water, ranging from 97% to 10%, and several elemental solutions were monitored by using the FLRD chemical sensors. Bulk index-based FLRD sensing showed that trace elements can be detected in deionized water. For physical sensing, water and cracking sensors were fabricated and embedded into concrete. A partially-etched single-mode fiber (SMF) was embedded into a concrete bar for water monitoring while a bare SMF without any treatment was directly embedded into another concrete bar for monitoring cracks. Furthermore, detection sensitivities of water and crack sensors were investigated as 10 ml water and 0.5 mm surface crack width, respectively. Additionally fiber loop ringdown-fiber Bragg grating temperature sensors were developed in the laboratory; two sensor units for water, crack, and temperature sensing were deployed into a concrete cube in a US Department of Energy test bed (Miami, FL). Multi-sensor applications in a real concrete structure were accomplished by testing the six FLRD sensors. As a final stage, a sensor network was assembled by multiplexing two or three FLRD sensors in series and parallel. Additionally, two FLRD sensors were combined in series and

  10. Security Threats in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sushma

    2011-05-01

    Full Text Available Wireless Sensor Network (WSN is an emergingtechnology that shows great promise for variousfuturistic applications both for mass public andmilitary. The sensing technology combined withprocessing power and wireless communication makesit lucrative for being exploited in abundance in future.Wireless sensor networks are characterized byseverely constrained computational and energy resources, and an ad hoc operational environment. Wireless sensor networks (WSN are currently receiving significant attention due to their unlimitedpotential. However, it is still very early in the lifetime of such systems and many research challenges exist. This paper studies the security aspects of these networks.

  11. Geodetic sensor systems and sensor networks: positioning and applications

    NARCIS (Netherlands)

    Verhagen, S.; Grejner-Brzezinska, D.; Retscher, G.; Santos, M.; Ding, X.; Gao, Y.; Jin, S.

    2009-01-01

    This contribution focuses on geodetic sensor systems and sensor networks for positioning and applications. The key problems in this area will be addressed together with an overview of applications. Global Navigation Satellite Systems (GNSS) and other geodetic techniques play a central role in many a

  12. Geodetic sensor systems and sensor networks: positioning and applications

    NARCIS (Netherlands)

    Verhagen, S.; Grejner-Brzezinska, D.; Retscher, G.; Santos, M.; Ding, X.; Gao, Y.; Jin, S.

    2009-01-01

    This contribution focuses on geodetic sensor systems and sensor networks for positioning and applications. The key problems in this area will be addressed together with an overview of applications. Global Navigation Satellite Systems (GNSS) and other geodetic techniques play a central role in many

  13. Sensor agnostics for networked MAV applications

    Science.gov (United States)

    Mitra, Atindra K.; Gates, Miguel; Barber, Chris; Goodwin, Thomas; Selmic, Rastko; Ordonez, Raul; Sekman, Ali; Malkani, Mohan

    2010-04-01

    A number of potential advantages associated with a new concept denoted as Sensor Agnostic Networks are discussed. For this particular paper, the primary focus is on integrated wireless networks that contain one or more MAVs (Micro Unmanned Aerial Vehicle). The development and presentation includes several approaches to analysis and design of Sensor Agnostic Networks based on the assumption of canonically structured architectures that are comprised of lowcost wireless sensor node technologies. A logical development is provided that motivates the potential adaptation of distributed low-cost sensor networks that leverage state-of-the-art wireless technologies and are specifically designed with pre-determined hooks, or facets, in-place that allow for quick and efficient sensor swaps between cost-low RF Sensors, EO Sensors, and Chem/Bio Sensors. All of the sample design synthesis procedures provided within this paper conform to the structural low-cost electronic wireless network architectural constraints adopted for our new approach to generalized sensing applications via the conscious integration of Sensor Agnostic capabilities.

  14. Sensor Networks in the Low Lands

    Directory of Open Access Journals (Sweden)

    Dennis J.A. Bijwaard

    2010-09-01

    Full Text Available This paper provides an overview of scientific and industrial developments of the last decade in the area of sensor networks in The Netherlands (Low Lands. The goal is to highlight areas in which the Netherlands has made most contributions and is currently a dominant player in the field of sensor networks. On the one hand, motivations, addressed topics, and initiatives taken in this period are presented, while on the other hand, special emphasis is given to identifying current and future trends and formulating a vision for the coming five to ten years. The presented overview and trend analysis clearly show that Dutch research and industrial efforts, in line with recent worldwide developments in the field of sensor technology, present a clear shift from sensor node platforms, operating systems, communication, networking, and data management aspects of the sensor networks to reasoning/cognition, control, and actuation.

  15. Community Air Sensor Network (CAIRSENSE) project ...

    Science.gov (United States)

    Advances in air pollution sensor technology have enabled the development of small and low cost systems to measure outdoor air pollution. The deployment of a large number of sensors across a small geographic area would have potential benefits to supplement traditional monitoring networks with additional geographic and temporal measurement resolution, if the data quality were sufficient. To understand the capability of emerging air sensor technology, the Community Air Sensor Network (CAIRSENSE) project deployed low cost, continuous and commercially-available air pollution sensors at a regulatory air monitoring site and as a local sensor network over a surrounding ~2 km area in Southeastern U.S. Co-location of sensors measuring oxides of nitrogen, ozone, carbon monoxide, sulfur dioxide, and particles revealed highly variable performance, both in terms of comparison to a reference monitor as well as whether multiple identical sensors reproduced the same signal. Multiple ozone, nitrogen dioxide, and carbon monoxide sensors revealed low to very high correlation with a reference monitor, with Pearson sample correlation coefficient (r) ranging from 0.39 to 0.97, -0.25 to 0.76, -0.40 to 0.82, respectively. The only sulfur dioxide sensor tested revealed no correlation (r 0.5), step-wise multiple linear regression was performed to determine if ambient temperature, relative humidity (RH), or age of the sensor in sampling days could be used in a correction algorihm to im

  16. Complete multiple round quantum dense coding with quantum logical network

    Institute of Scientific and Technical Information of China (English)

    LI ChunYan; LI XiHan; DENG FuGuo; ZHOU Ping; ZHOU HongYu

    2007-01-01

    We present a complete multiple round quantum dense coding scheme for improving the source capacity of that introduced recently by Zhang et al. The receiver resorts to two qubits for storing the four local unitary operations in each round.

  17. Topology Optimisation of Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Thike Aye Min

    2016-01-01

    Full Text Available Wireless sensor networks are widely used in a variety of fields including industrial environments. In case of a clustered network the location of cluster head affects the reliability of the network operation. Finding of the optimum location of the cluster head, therefore, is critical for the design of a network. This paper discusses the optimisation approach, based on the brute force algorithm, in the context of topology optimisation of a cluster structure centralised wireless sensor network. Two examples are given to verify the approach that demonstrate the implementation of the brute force algorithm to find an optimum location of the cluster head.

  18. Bluetooth and Sensor Networks : A Reality Check

    DEFF Research Database (Denmark)

    Leopold, Martin; Bonnet, Philippe

    2003-01-01

    The current generation of sensor nodes rely on commodity components. The choice of the radio is particularly important as it impacts not only energy consumption but also software design (e.g., network self-assembly, multihop routing and in-network processing). Bluetooth is one of the most popular...... commodity radios for wireless devices. As a representative of the frequency hopping spread spectrum radios, it is a natural alternative to broadcast radios in the context of sensor networks. The question is whether Bluetooth can be a viable alternative in practice. In this paper, we report our experience...... using Bluetooth for the sensor network regime. We describe our tiny Bluetooth stack that allows TinyOS applications to run on Bluetooth-based sensor nodes, we present a multihop network assembly procedure that leverages Bluetooth's device discovery protocol, and we discuss how Bluetooth favorably...

  19. Bluetooth and sensor networks: a reality check

    DEFF Research Database (Denmark)

    Leopold, Martin; Dydensborg, Mads; Bonnet, Philippe

    2003-01-01

    The current generation of sensor nodes rely on commodity components. The choice of the radio is particularly important as it impacts not only energy consumption but also software design (e.g., network self-assembly, multihop routing and in-network processing). Bluetooth is one of the most popular...... commodity radios for wireless devices. As a representative of the frequency hopping spread spectrum radios, it is a natural alternative to broadcast radios in the context of sensor networks. The question is whether Bluetooth can be a viable alternative in practice. In this paper, we report our experience...... using Bluetooth for the sensor network regime. We describe our tiny Bluetooth stack that allows TinyOS applications to run on Bluetooth-based sensor nodes, we present a multihop network assembly procedure that leverages Bluetooth's device discovery protocol, and we discuss how Bluetooth favorably...

  20. Bluetooth and sensor networks: a reality check

    DEFF Research Database (Denmark)

    Leopold, Martin; Dydensborg, Mads; Bonnet, Philippe

    2003-01-01

    commodity radios for wireless devices. As a representative of the frequency hopping spread spectrum radios, it is a natural alternative to broadcast radios in the context of sensor networks. The question is whether Bluetooth can be a viable alternative in practice. In this paper, we report our experience......The current generation of sensor nodes rely on commodity components. The choice of the radio is particularly important as it impacts not only energy consumption but also software design (e.g., network self-assembly, multihop routing and in-network processing). Bluetooth is one of the most popular...... using Bluetooth for the sensor network regime. We describe our tiny Bluetooth stack that allows TinyOS applications to run on Bluetooth-based sensor nodes, we present a multihop network assembly procedure that leverages Bluetooth's device discovery protocol, and we discuss how Bluetooth favorably...

  1. Topology Optimization for Urban Traffic Sensor Network

    Institute of Scientific and Technical Information of China (English)

    HU Jianming; SONG Jingyan; ZHANG Mingchen; KANG Xiaojing

    2008-01-01

    This paper presents an optimized topology for urban traffic sensor networks. Small world theory is used to improve the performance of the wireless communication system with a heterogeneous transmission model and an optimal transmission radius. Furthermore, a series of simulations based on the actual road network around the 2nd Ring Road in Beijing demonstrate the practicability of constructing artificial "small worlds". Moreover, the particle swarm optimization method is used to calculate the globally best distribution of the nodes with the large radius. The methods proposed in this paper will be helpful to the sensor nodes deployment of the new urban traffic sensor networks.

  2. Wireless sensor networks distributed consensus estimation

    CERN Document Server

    Chen, Cailian; Guan, Xinping

    2014-01-01

    This SpringerBrief evaluates the cooperative effort of sensor nodes to accomplish high-level tasks with sensing, data processing and communication. The metrics of network-wide convergence, unbiasedness, consistency and optimality are discussed through network topology, distributed estimation algorithms and consensus strategy. Systematic analysis reveals that proper deployment of sensor nodes and a small number of low-cost relays (without sensing function) can speed up the information fusion and thus improve the estimation capability of wireless sensor networks (WSNs). This brief also investiga

  3. Integration and Analysis of Neighbor Discovery and Link Quality Estimation in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Marjan Radi

    2014-01-01

    Full Text Available Network connectivity and link quality information are the fundamental requirements of wireless sensor network protocols to perform their desired functionality. Most of the existing discovery protocols have only focused on the neighbor discovery problem, while a few number of them provide an integrated neighbor search and link estimation. As these protocols require a careful parameter adjustment before network deployment, they cannot provide scalable and accurate network initialization in large-scale dense wireless sensor networks with random topology. Furthermore, performance of these protocols has not entirely been evaluated yet. In this paper, we perform a comprehensive simulation study on the efficiency of employing adaptive protocols compared to the existing nonadaptive protocols for initializing sensor networks with random topology. In this regard, we propose adaptive network initialization protocols which integrate the initial neighbor discovery with link quality estimation process to initialize large-scale dense wireless sensor networks without requiring any parameter adjustment before network deployment. To the best of our knowledge, this work is the first attempt to provide a detailed simulation study on the performance of integrated neighbor discovery and link quality estimation protocols for initializing sensor networks. This study can help system designers to determine the most appropriate approach for different applications.

  4. Integration and analysis of neighbor discovery and link quality estimation in wireless sensor networks.

    Science.gov (United States)

    Radi, Marjan; Dezfouli, Behnam; Abu Bakar, Kamalrulnizam; Abd Razak, Shukor

    2014-01-01

    Network connectivity and link quality information are the fundamental requirements of wireless sensor network protocols to perform their desired functionality. Most of the existing discovery protocols have only focused on the neighbor discovery problem, while a few number of them provide an integrated neighbor search and link estimation. As these protocols require a careful parameter adjustment before network deployment, they cannot provide scalable and accurate network initialization in large-scale dense wireless sensor networks with random topology. Furthermore, performance of these protocols has not entirely been evaluated yet. In this paper, we perform a comprehensive simulation study on the efficiency of employing adaptive protocols compared to the existing nonadaptive protocols for initializing sensor networks with random topology. In this regard, we propose adaptive network initialization protocols which integrate the initial neighbor discovery with link quality estimation process to initialize large-scale dense wireless sensor networks without requiring any parameter adjustment before network deployment. To the best of our knowledge, this work is the first attempt to provide a detailed simulation study on the performance of integrated neighbor discovery and link quality estimation protocols for initializing sensor networks. This study can help system designers to determine the most appropriate approach for different applications.

  5. Application for Measurement in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Miroslav MAHDAL

    2009-06-01

    Full Text Available This paper deals with wireless sensor networks, which are based on IEEE 802.15.4 standard. The development kit from Jennic company was used for wireless measuring of values and for creation of sensor network. For this purposes the sensor boards with wireless modules with marking JN5139 were used. These boards provide sensors (sensor of temperature, relative humidity and light sensor but also another interface, which helps to develop applications. Modules are programmed in Integrated Development Environment (IDE, which integrates C function library and C++ compiler and linker. The visualization application was created for monitoring of wireless sensor network. There is the possibility of local and wireless measurement. For creation of this application the SCADA/HMI system, Control Web 5 was used. This SCADA/HMI system enables to communicate with all wireless modules through base station (network's coordinator. The application also enables initialisation and network setting the any wireless module communicating with the base station. The advantage is the remote configuration and control of network. The application also enables the gathering, converting, viewing and archiving of incoming data from particular modules.

  6. A Sentinel Sensor Network for Hydrogen Sensing

    Directory of Open Access Journals (Sweden)

    Andrew J. Mason

    2003-02-01

    Full Text Available A wireless sensor network is presented for in-situ monitoring of atmospheric hydrogen concentration. The hydrogen sensor network consists of multiple sensor nodes, equipped with titania nanotube hydrogen sensors, distributed throughout the area of interest; each node is both sensor, and data-relay station that enables extended wide area monitoring without a consequent increase of node power and thus node size. The hydrogen sensor is fabricated from a sheet of highly ordered titania nanotubes, made by anodization of a titanium thick film, to which platinum electrodes are connected. The electrical resistance of the hydrogen sensor varies from 245 Ω at 500 ppm hydrogen, to 10.23 kΩ at 0 ppm hydrogen (pure nitrogen environment. The measured resistance is converted to voltage, 0.049 V at 500 ppm to 2.046 V at 0 ppm, by interface circuitry. The microcontroller of the sensor node digitizes the voltage and transmits the digital information, using intermediate nodes as relays, to a host node that downloads measurement data to a computer for display. This paper describes the design and operation of the sensor network, the titania nanotube hydrogen sensors with an apparent low level resolution of approximately 0.05 ppm, and their integration in one widely useful device.

  7. Sensor Validation using Bayesian Networks

    Data.gov (United States)

    National Aeronautics and Space Administration — One of NASA’s key mission requirements is robust state estimation. Sensing, using a wide range of sensors and sensor fusion approaches, plays a central role in...

  8. Romanian Complex Data Center for Dense Seismic network

    Science.gov (United States)

    Neagoe, Cristian; Ionescu, Constantin; Marius Manea, Liviu

    2010-05-01

    Since 2002 the National Institute for Earth Physics (NIEP) developed its own real-time digital seismic network: consisting of 96 seismic stations of which 35 are broadband sensors and 24 stations equipped with short period sensors and two arrays earthquakes that transmit data in real time at the National Data Center (NDC) and Eforie Nord (EFOR) Seismic Observatory. EFOR is the back-up for the NDC and also a monitoring center for Black Sea tsunamis. Seismic stations are equipped with Quanterra Q330 and K2 digitizers, broadband seismometers (STS2, CMG40T, CMG 3ESP, CMG3T) and acceleration sensors Episensor Kinemetrics (+ / - 2G). SeedLink who is a part of Seiscomp2.5 and Antelope are software packages used for acquisition in real time (RT) and for data exchange. Communication of digital seismic stations to the National Data Center in Bucharest and Seismic Observatory Eforie Nord is assured by 5 providers (GPRS, VPN, satellite radio and Internet communication). For acquisition and data processing at the two centers of reception and processing is used AntelopeTM 4.11 running on 2 workstations: one for real-time and other for offline processing and also a Seiscomp 3 server that works as back-up for Antelope 4.11 Both acquisition and analysis of seismic data systems produced information about local and global parameters of earthquakes, in addition Antelope is used for manual processing (association events, the calculation of magnitude, creating a database, sending seismic bulletins, calculation of PGA and PGV , etc.), generating ShakeMap products and interacts with global data centers. In order to make all this information easily available across the Web and also lay the grounds for a more modular and flexible development environment the National Data Center developed tools to enable centralizing of data from software such as Antelope which is using a dedicated database system ( Datascope, a database system based on text files ) to a more general-purpose database, My

  9. Reputation-Based Secure Sensor Localization in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Jingsha He

    2014-01-01

    Full Text Available Location information of sensor nodes in wireless sensor networks (WSNs is very important, for it makes information that is collected and reported by the sensor nodes spatially meaningful for applications. Since most current sensor localization schemes rely on location information that is provided by beacon nodes for the regular sensor nodes to locate themselves, the accuracy of localization depends on the accuracy of location information from the beacon nodes. Therefore, the security and reliability of the beacon nodes become critical in the localization of regular sensor nodes. In this paper, we propose a reputation-based security scheme for sensor localization to improve the security and the accuracy of sensor localization in hostile or untrusted environments. In our proposed scheme, the reputation of each beacon node is evaluated based on a reputation evaluation model so that regular sensor nodes can get credible location information from highly reputable beacon nodes to accomplish localization. We also perform a set of simulation experiments to demonstrate the effectiveness of the proposed reputation-based security scheme. And our simulation results show that the proposed security scheme can enhance the security and, hence, improve the accuracy of sensor localization in hostile or untrusted environments.

  10. Establishing trust in decentralized smart sensor networks

    Science.gov (United States)

    Vagts, H.; Cosar, T.; Beyerer, J.

    2011-06-01

    Smart sensors can gather all kind of information and process it. Cameras are still dominating and smart cameras can offer services for face recognition or person tracking. Operators are building collaborations to cover a larger area, to save costs and to add more and different sensors. Cryptographic methods may achieve integrity and confidentiality between operators, but not trust. Even if a partner or one of his sensors is authenticated, no statements can be made about the quality of the sensor data. Hence, trust must be established between the partners and their sensors. Trust can be built based on past experience. A reputation system collects opinions of operators about the behavior of sensors and calculates trust based on these opinions. Many reputation systems have been proposed, e.g., for authentication of files in peer-topeer networks. This work presents a new reputation system, which is designed to calculate the trustworthiness of smart sensors and smart sensor systems. A new trust model, including functions to calculate and update trust on past experiences, is proposed. When fusing information of multiple sensors, it cannot always be reconstructed, which information led to a bad result. Hence, an approach for fair rating is shown. The proposed system has been realized in a Service-Oriented Architecture for easy integration in existing smart sensor systems, e.g., smart surveillance systems. The model itself can be used in every decentralized heterogeneous smart sensor network.

  11. Graphical Model Theory for Wireless Sensor Networks

    Energy Technology Data Exchange (ETDEWEB)

    Davis, William B.

    2002-12-08

    Information processing in sensor networks, with many small processors, demands a theory of computation that allows the minimization of processing effort, and the distribution of this effort throughout the network. Graphical model theory provides a probabilistic theory of computation that explicitly addresses complexity and decentralization for optimizing network computation. The junction tree algorithm, for decentralized inference on graphical probability models, can be instantiated in a variety of applications useful for wireless sensor networks, including: sensor validation and fusion; data compression and channel coding; expert systems, with decentralized data structures, and efficient local queries; pattern classification, and machine learning. Graphical models for these applications are sketched, and a model of dynamic sensor validation and fusion is presented in more depth, to illustrate the junction tree algorithm.

  12. Genetic Algorithm for Hierarchical Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sajid Hussain

    2007-09-01

    Full Text Available Large scale wireless sensor networks (WSNs can be used for various pervasive and ubiquitous applications such as security, health-care, industry automation, agriculture, environment and habitat monitoring. As hierarchical clusters can reduce the energy consumption requirements for WSNs, we investigate intelligent techniques for cluster formation and management. A genetic algorithm (GA is used to create energy efficient clusters for data dissemination in wireless sensor networks. The simulation results show that the proposed intelligent hierarchical clustering technique can extend the network lifetime for different network deployment environments.

  13. Flexible Sensor Network Reprogramming for Logistics

    NARCIS (Netherlands)

    Evers, L.; Havinga, P.J.M.; Kuper, J.

    2007-01-01

    Besides the currently realized applications, Wireless Sensor Networks can be put to use in logistics processes. However, doing so requires a level of flexibility and safety not provided by the current WSN software platforms. This paper discusses a logistics scenario, and presents SensorScheme, a run

  14. Ultra-wideband radar sensors and networks

    Science.gov (United States)

    Leach, Jr., Richard R; Nekoogar, Faranak; Haugen, Peter C

    2013-08-06

    Ultra wideband radar motion sensors strategically placed in an area of interest communicate with a wireless ad hoc network to provide remote area surveillance. Swept range impulse radar and a heart and respiration monitor combined with the motion sensor further improves discrimination.

  15. Sensor Networks in the Low Lands

    NARCIS (Netherlands)

    Meratnia, Nirvana; Zwaag, van der Berend Jan; Dijk, van Hylke W.; Bijwaard, Dennis J.A.; Havinga, Paul J.M.

    2010-01-01

    This paper provides an overview of scientific and industrial developments of the last decade in the area of sensor networks in The Netherlands (Low Lands). The goal is to highlight areas in which the Netherlands has made most contributions and is currently a dominant player in the field of sensor ne

  16. Lifetime Analysis of Reliable Wireless Sensor Networks

    NARCIS (Netherlands)

    Baydere, S.; Safkan, Y.; Durmaz Incel, O.

    2005-01-01

    A wireless sensor network is comprised of a large number of battery-limited sensor nodes communicating with unreliable radio links. The nodes are deployed in an ad hoc fashion and a reverse multicast tree is formed in the target domain. The sink node disseminates a query and collects responses from

  17. Current Trends in Wireless Sensor Network Design

    OpenAIRE

    Neha Jain; Agrawal, Dharma P.

    2005-01-01

    The self-organizing nature of sensor networks, their autonomous operation and potential architectural alternatives make them suitable for different data-centric applications. Their wider acceptance seems to be rising on the horizon. In this article, we present an overview of the current state of the art in the field of wireless sensor networks. We also present various open research issues and provide an insight about the latest developments that need to be explored in greater depth that could...

  18. Sensor Network Design for Nonlinear Processes

    Institute of Scientific and Technical Information of China (English)

    李博; 陈丙珍

    2003-01-01

    This paper presents a method to design a cost-optimal nonredundant sensor network to observe all variables in a general nonlinear process. A mixed integer linear programming model was used to minimize the cost with data classification to check the observability of all unmeasured variables. This work is a starting point for designing sensor networks for general nonlinear processes based on various criteria, such as reliability and accuracy.

  19. The use of Wireless Sensor Network for increasing airport security

    Directory of Open Access Journals (Sweden)

    Jakub Kraus

    2013-11-01

    Full Text Available This article focuses on the use of wireless sensor networks for airport security, respectively using sensor networks as a replacement or add-on to existing security measures. The article describes the sensor network and its possible application to various airport objects and financial analysis of the perimeter security with wireless sensor network.

  20. Artificial intelligence based event detection in wireless sensor networks

    NARCIS (Netherlands)

    Bahrepour, M.

    2013-01-01

    Wireless sensor networks (WSNs) are composed of large number of small, inexpensive devices, called sensor nodes, which are equipped with sensing, processing, and communication capabilities. While traditional applications of wireless sensor networks focused on periodic monitoring, the focus of more

  1. Ocean current mapping using networked distributed sensors

    Science.gov (United States)

    Huang, Chen-Fen; Yang, T. C.; Liu, Jin-Yuan; Burchfield, Tom; Schindall, Jeff

    2012-11-01

    Distributed underwater sensors are expected to provide environmental (oceanographic) monitoring over large areas. As fabrication technology advances, low cost sensors will be available for many applications. The sensors communicate to each other and are networked using acoustic communications. This paper proposes a method for ocean current tomography using distributed networked sensors and presents preliminary experimental results by this approach. Conventional acoustic tomography uses the acoustic sensors distributed on the periphery of an area of interest. Environmental reconstruction requires solving a challenging high dimensional inverse problem, typically requiring substantial computational effort. Given distributed sensors, currents can be constructed locally based on data from neighboring sensors. It is shown using simulated data that results obtained by the proposed method are similar to those obtained by a conventional tomographic method based on peripheral sensors. In addition, one finds that the distributed sensors consume much less energy than that by the conventional tomographic approach. An acoustic communication and networking experiment was conducted near the Sizihwan Bay in Kaohsiung, Taiwan, in May 2011. The communication signals are analyzed to measure currents as a function of space and time. The procedure is simple and can be implemented in real-time using in-buoy processing.

  2. Network Management Framework for Wireless Sensor Networks

    Science.gov (United States)

    Kim, Jaewoo; Jeon, Hahnearl; Lee, Jaiyong

    Network Management is the process of managing, monitoring, and controlling the network. Conventional network management was based on wired network which is heavy and unsuitable for resource constrained WSNs. WSNs can have large scale network and it is impossible to manage each node individually. Also, polling mechanism of Simple Network Management Protocol (SNMP) impose heavy management traffic overhead. Since management messages consume resources of WSNs, it can affect the performance of the network. Therefore, it is necessary for WSNs to perform energy efficient network management. In this paper, we will propose network management framework. We will introduce cluster-based network management architecture, and classify the Management Information Base (MIB) according to their characteristics. Then, we will define management messages and message exchange operation for each kind of MIB. The analysis result of the management overhead indicates that the proposed framework can reduce management traffic compared to polling mechanism.

  3. A self-managing fault management mechanism for wireless sensor networks

    CERN Document Server

    Asim, Muhammad; Merabti, Madjid

    2010-01-01

    A sensor network can be described as a collection of sensor nodes which co-ordinate with each other to perform some specific function. These sensor nodes are mainly in large numbers and are densely deployed either inside the phenomenon or very close to it. They can be used for various application areas (e.g. health, military, home). Failures are inevitable in wireless sensor networks due to inhospitable environment and unattended deployment. Therefore, it is necessary that network failures are detected in advance and appropriate measures are taken to sustain network operation. We previously proposed a cellular approach for fault detection and recovery. In this paper we extend the cellular approach and propose a new fault management mechanism to deal with fault detection and recovery. We propose a hierarchical structure to properly distribute fault management tasks among sensor nodes by introducing more 'self-managing' functions. The proposed failure detection and recovery algorithm has been compared with some...

  4. Handbook of sensor networks compact wireless and wired sensing systems

    CERN Document Server

    Ilyas, Mohammad

    2004-01-01

    INTRODUCTION Opportunities and Challenges in Wireless Sensor Networks, M. Haenggi, Next Generation Technologies to Enable Sensor Networks, J. I.  Goodman, A. I. Reuther, and D. R. Martinez Sensor Networks Management, L. B. Ruiz, J. M. Nogueira, and A. A. F. Loureiro Models for Programmability in Sensor Networks, A. Boulis Miniaturizing Sensor Networks with MEMS, Brett Warneke A Taxonomy of Routing Techniques in Wireless Sensor Networks, J. N. Al-Karaki and A. E. Kamal Artificial Perceptual Systems, A. Loutfi, M. Lindquist, and P. Wide APPLICATIONS Sensor Network Architecture and Appl

  5. Extension of Pairwise Broadcast Clock Synchronization for Multicluster Sensor Networks

    Directory of Open Access Journals (Sweden)

    Bruce W. Suter

    2008-01-01

    Full Text Available Time synchronization is crucial for wireless sensor networks (WSNs in performing a number of fundamental operations such as data coordination, power management, security, and localization. The Pairwise Broadcast Synchronization (PBS protocol was recently proposed to minimize the number of timing messages required for global network synchronization, which enables the design of highly energy-efficient WSNs. However, PBS requires all nodes in the network to lie within the communication ranges of two leader nodes, a condition which might not be available in some applications. This paper proposes an extension of PBS to the more general class of sensor networks. Based on the hierarchical structure of the network, an energy-efficient pair selection algorithm is proposed to select the best pairwise synchronization sequence to reduce the overall energy consumption. It is shown that in a multicluster networking environment, PBS requires a far less number of timing messages than other well-known synchronization protocols and incurs no loss in synchronization accuracy. Moreover, the proposed scheme presents significant energy savings for densely deployed WSNs.

  6. On Node Replication Attack in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Mumtaz Qabulio

    2016-04-01

    Full Text Available WSNs (Wireless Sensor Networks comprise a large number of small, inexpensive, low power and memory constrained sensing devices (called sensor nodes that are densely deployed to measure a given physical phenomenon. Since WSNs are commonly deployed in a hostile and unattended environment, it is easy for an adversary to physically capture one or more legitimate sensor nodes, re-program and redeploy them in the network. As a result, the adversary becomes able to deploy several identical copies of physically captured nodes in the network in order to perform illegitimate activities. This type of attack is referred to as Node Replication Attack or Clone Node Attack. By launching node replication attack, an adversary can easily get control on the network which consequently is the biggest threat to confidentiality, integrity and availability of data and services. Thus, detection and prevention of node replication attack in WSNs has become an active area of research and to date more than two dozen schemes have been proposed, which address this issue. In this paper, we present a comprehensive review, classification and comparative analysis of twenty five of these schemes which help to detect and/or prevent node replication attack in WSNs

  7. Low-Power Wireless Sensor Network Infrastructures

    DEFF Research Database (Denmark)

    Hansen, Morten Tranberg

    environments and communication primitives in wireless sensor network and traditional network development are closing. However, fundamental differences in wireless technology and energy constraints are still to be considered at the lower levels of the software stack. To fulfill energy requirements hardware......Advancements in wireless communication and electronics improving form factor and hardware capabilities has expanded the applicability of wireless sensor networks. Despite these advancements, devices are still limited in terms of energy which creates the need for duty-cycling and low-power protocols......, and network management which enables construction of low-power wireless sensor network applications. More specifically, these services are designed with the extreme low-power scenarios of the SensoByg project in mind and are implemented as follows. First, low-power communication is implemented with Auto...

  8. A Survey on Wireless Sensor Network Security

    CERN Document Server

    Sen, Jaydip

    2010-01-01

    Wireless sensor networks (WSNs) have recently attracted a lot of interest in the research community due their wide range of applications. Due to distributed nature of these networks and their deployment in remote areas, these networks are vulnerable to numerous security threats that can adversely affect their proper functioning. This problem is more critical if the network is deployed for some mission-critical applications such as in a tactical battlefield. Random failure of nodes is also very likely in real-life deployment scenarios. Due to resource constraints in the sensor nodes, traditional security mechanisms with large overhead of computation and communication are infeasible in WSNs. Security in sensor networks is, therefore, a particularly challenging task. This paper discusses the current state of the art in security mechanisms for WSNs. Various types of attacks are discussed and their countermeasures presented. A brief discussion on the future direction of research in WSN security is also included.

  9. Sensor Location Problem Optimization for Traffic Network with Different Spatial Distributions of Traffic Information.

    Science.gov (United States)

    Bao, Xu; Li, Haijian; Qin, Lingqiao; Xu, Dongwei; Ran, Bin; Rong, Jian

    2016-10-27

    To obtain adequate traffic information, the density of traffic sensors should be sufficiently high to cover the entire transportation network. However, deploying sensors densely over the entire network may not be realistic for practical applications due to the budgetary constraints of traffic management agencies. This paper describes several possible spatial distributions of traffic information credibility and proposes corresponding different sensor information credibility functions to describe these spatial distribution properties. A maximum benefit model and its simplified model are proposed to solve the traffic sensor location problem. The relationships between the benefit and the number of sensors are formulated with different sensor information credibility functions. Next, expanding models and algorithms in analytic results are performed. For each case, the maximum benefit, the optimal number and spacing of sensors are obtained and the analytic formulations of the optimal sensor locations are derived as well. Finally, a numerical example is proposed to verify the validity and availability of the proposed models for solving a network sensor location problem. The results show that the optimal number of sensors of segments with different model parameters in an entire freeway network can be calculated. Besides, it can also be concluded that the optimal sensor spacing is independent of end restrictions but dependent on the values of model parameters that represent the physical conditions of sensors and roads.

  10. Wireless sensor networks in a maritime environment

    Science.gov (United States)

    Kavelaars, W.; Maris, M.

    2005-10-01

    In the recent years, there has been a lot of research on sensor networks and their applications. In particular for monitoring large and potentially hostile areas these networks have proven to be very useful. The technique of land-based sensor networks can be extrapolated to sensing buoys at sea or in harbors. This is a novel and intriguing addition to existing maritime monitoring systems. At TNO, much research effort has gone into developing sensor networks. In this paper, the TNOdes sensor network is presented. Its practical employability is demonstrated in a surveillance application deploying 50 nodes. The system is capable of tracking persons in a field, as would be the situation around a military compound. A camera-system is triggered by the sensors and zooms into the detected moving objects. It is described how this system could be modified to create a wireless buoys network. Typical applications of a wireless (and potentially mobile) buoy network are bay-area surveillance, mine detection, identification and ship protection.

  11. Planning and Scheduling for Environmental Sensor Networks

    Science.gov (United States)

    Frank, J. D.

    2005-12-01

    Environmental Sensor Networks are a new way of monitoring the environment. They comprise autonomous sensor nodes in the environment that record real-time data, which is retrieved, analyzed, integrated with other data sets (e.g. satellite images, GIS, process models) and ultimately lead to scientific discoveries. Sensor networks must operate within time and resource constraints. Sensors have limited onboard memory, energy, computational power, communications windows and communications bandwidth. The value of data will depend on when, where and how it was collected, how detailed the data is, how long it takes to integrate the data, and how important the data was to the original scientific question. Planning and scheduling of sensor networks is necessary for effective, safe operations in the face of these constraints. For example, power bus limitations may preclude sensors from simultaneously collecting data and communicating without damaging the sensor; planners and schedulers can ensure these operations are ordered so that they do not happen simultaneously. Planning and scheduling can also ensure best use of the sensor network to maximize the value of collected science data. For example, if data is best recorded using a particular camera angle but it is costly in time and energy to achieve this, planners and schedulers can search for times when time and energy are available to achieve the optimal camera angle. Planning and scheduling can handle uncertainty in the problem specification; planners can be re-run when new information is made available, or can generate plans that include contingencies. For example, if bad weather may prevent the collection of data, a contingent plan can check lighting conditions and turn off data collection to save resources if lighting is not ideal. Both mobile and immobile sensors can benefit from planning and scheduling. For example, data collection on otherwise passive sensors can be halted to preserve limited power and memory

  12. JSC Wireless Sensor Network Update

    Science.gov (United States)

    Wagner, Robert

    2010-01-01

    Sensor nodes composed of three basic components... radio module: COTS radio module implementing standardized WSN protocol; treated as WSN modem by main board main board: contains application processor (TI MSP430 microcontroller), memory, power supply; responsible for sensor data acquisition, pre-processing, and task scheduling; re-used in every application with growing library of embedded C code sensor card: contains application-specific sensors, data conditioning hardware, and any advanced hardware not built into main board (DSPs, faster A/D, etc.); requires (re-) development for each application.

  13. Curvature of Indoor Sensor Network: Clustering Coefficient

    Directory of Open Access Journals (Sweden)

    2009-03-01

    Full Text Available We investigate the geometric properties of the communication graph in realistic low-power wireless networks. In particular, we explore the concept of the curvature of a wireless network via the clustering coefficient. Clustering coefficient analysis is a computationally simplified, semilocal approach, which nevertheless captures such a large-scale feature as congestion in the underlying network. The clustering coefficient concept is applied to three cases of indoor sensor networks, under varying thresholds on the link packet reception rate (PRR. A transition from positive curvature (“meshed” network to negative curvature (“core concentric” network is observed by increasing the threshold. Even though this paper deals with network curvature per se, we nevertheless expand on the underlying congestion motivation, propose several new concepts (network inertia and centroid, and finally we argue that greedy routing on a virtual positively curved network achieves load balancing on the physical network.

  14. Energy Efficiency of the IEEE 802.15.4 Standard in Dense Wireless Microsensor Networks: Modeling and Improvement Perspectives

    CERN Document Server

    Bougard, Bruno; Daly, Denis C; Chandrakasan, Anantha; Dehaene, Wim

    2011-01-01

    Wireless microsensor networks, which have been the topic of intensive research in recent years, are now emerging in industrial applications. An important milestone in this transition has been the release of the IEEE 802.15.4 standard that specifies interoperable wireless physical and medium access control layers targeted to sensor node radios. In this paper, we evaluate the potential of an 802.15.4 radio for use in an ultra low power sensor node operating in a dense network. Starting from measurements carried out on the off-the-shelf radio, effective radio activation and link adaptation policies are derived. It is shown that, in a typical sensor network scenario, the average power per node can be reduced down to 211m mm mW. Next, the energy consumption breakdown between the different phases of a packet transmission is presented, indicating which part of the transceiver architecture can most effectively be optimized in order to further reduce the radio power, enabling self-powered wireless microsensor networks...

  15. Wireless Sensor Network for Wearable Physiological Monitoring

    Directory of Open Access Journals (Sweden)

    P. S. Pandian

    2008-05-01

    Full Text Available Wearable physiological monitoring system consists of an array of sensors embedded into the fabric of the wearer to continuously monitor the physiological parameters and transmit wireless to a remote monitoring station. At the remote monitoring station the data is correlated to study the overall health status of the wearer. In the conventional wearable physiological monitoring system, the sensors are integrated at specific locations on the vest and are interconnected to the wearable data acquisition hardware by wires woven into the fabric. The drawbacks associated with these systems are the cables woven in the fabric pickup noise such as power line interference and signals from nearby radiating sources and thereby corrupting the physiological signals. Also repositioning the sensors in the fabric is difficult once integrated. The problems can be overcome by the use of physiological sensors with miniaturized electronics to condition, process, digitize and wireless transmission integrated into the single module. These sensors are strategically placed at various locations on the vest. Number of sensors integrated into the fabric form a network (Personal Area Network and interacts with the human system to acquire and transmit the physiological data to a wearable data acquisition system. The wearable data acquisition hardware collects the data from various sensors and transmits the processed data to the remote monitoring station. The paper discusses wireless sensor network and its application to wearable physiological monitoring and its applications. Also the problems associated with conventional wearable physiological monitoring are discussed.

  16. Fault Reconnaissance Agent for Sensor Networks

    Directory of Open Access Journals (Sweden)

    Elhadi M. Shakshuki

    2010-01-01

    Full Text Available One of the key prerequisite for a scalable, effective and efficient sensor network is the utilization of low-cost, low-overhead and high-resilient fault-inference techniques. To this end, we propose an intelligent agent system with a problem solving capability to address the issue of fault inference in sensor network environments. The intelligent agent system is designed and implemented at base-station side. The core of the agent system – problem solver – implements a fault-detection inference engine which harnesses Expectation Maximization (EM algorithm to estimate fault probabilities of sensor nodes. To validate the correctness and effectiveness of the intelligent agent system, a set of experiments in a wireless sensor testbed are conducted. The experimental results show that our intelligent agent system is able to precisely estimate the fault probability of sensor nodes.

  17. Securing Wireless Sensor Networks: Security Architectures

    Directory of Open Access Journals (Sweden)

    David Boyle

    2008-01-01

    Full Text Available Wireless sensor networking remains one of the most exciting and challenging research domains of our time. As technology progresses, so do the capabilities of sensor networks. Limited only by what can be technologically sensed, it is envisaged that wireless sensor networks will play an important part in our daily lives in the foreseeable future. Privy to many types of sensitive information, both sensed and disseminated, there is a critical need for security in a number of applications related to this technology. Resulting from the continuous debate over the most effective means of securing wireless sensor networks, this paper considers a number of the security architectures employed, and proposed, to date, with this goal in sight. They are presented such that the various characteristics of each protocol are easily identifiable to potential network designers, allowing a more informed decision to be made when implementing a security protocol for their intended application. Authentication is the primary focus, as the most malicious attacks on a network are the work of imposters, such as DOS attacks, packet insertion etc. Authentication can be defined as a security mechanism, whereby, the identity of a node in the network can be identified as a valid node of the network. Subsequently, data authenticity can be achieved; once the integrity of the message sender/receiver has been established.

  18. Bridge monitoring using heterogeneous wireless sensor network

    Science.gov (United States)

    Haran, Shivan; Kher, Shubhalaxmi; Mehndiratta, Vandana

    2010-03-01

    Wireless sensor networks (WSN) are proving to be a good fit where real time monitoring of multiple physical parameters is required. In many applications such as structural health monitoring, patient data monitoring, traffic accident monitoring and analysis, sensor networks may involve interface with conventional P2P systems and it is challenging to handle heterogeneous network systems. Heterogeneous deployments will become increasingly prevalent as it allows for systems to seamlessly integrate and interoperate especially when it comes to applications involving monitoring of large infrastructures. Such networks may have wireless sensor network overlaid on a conventional computer network to pick up data from one distant location and carry out the analysis after relaying it over to another distant location. This paper discusses monitoring of bridges using WSN. As a test bed, a heterogeneous network of WSN and conventional P2P together with a combination of sensing devices (including vibration and strain) is to be used on a bridge model. Issues related to condition assessment of the bridge for situations including faults, overloads, etc., as well as analysis of network and system performance will be discussed. When conducted under controlled conditions, this is an important step towards fine tuning the monitoring system for recommendation of permanent mounting of sensors and collecting data that can help in the development of new methods for inspection and evaluation of bridges. The proposed model, design, and issues therein will be discussed, along with its implementation and results.

  19. A simulation model for the lifetime of wireless sensor networks

    CERN Document Server

    Elleithy, Abdelrahman

    2012-01-01

    In this paper we present a model for the lifetime of wireless sensor networks. The model takes into consideration several parameters such as the total number of sensors, network size, percentage of sink nodes, location of sensors, the mobility of sensors, and power consumption. A definition of the life time of the network based on three different criteria is introduced; percentage of available power to total power, percentage of alive sensors to total sensors, and percentage of alive sink sensors to total sink sensors. A Matlab based simulator is developed for the introduced model. A number of wireless sensor networks scenarios are presented and discussed.

  20. Sensor Deployment for Network-like Environments

    CERN Document Server

    Greco, Luca; Piccoli, Benedetto

    2010-01-01

    This paper considers the problem of optimally deploying omnidirectional sensors, with potentially limited sensing radius, in a network-like environment. This model provides a compact and effective description of complex environments as well as a proper representation of road or river networks. We present a two-step procedure based on a discrete-time gradient ascent algorithm to find a local optimum for this problem. The first step performs a coarse optimization where sensors are allowed to move in the plane, to vary their sensing radius and to make use of a reduced model of the environment called collapsed network. It is made up of a finite discrete set of points, barycenters, produced by collapsing network edges. Sensors can be also clustered to reduce the complexity of this phase. The sensors' positions found in the first step are then projected on the network and used in the second finer optimization, where sensors are constrained to move only on the network. The second step can be performed on-line, in a ...

  1. Model-driven SOA for sensor networks

    Science.gov (United States)

    Ibbotson, John; Gibson, Christopher; Geyik, Sahin; Szymanski, Boleslaw K.; Mott, David; Braines, David; Klapiscak, Tom; Bergamaschi, Flavio

    2011-06-01

    Our previous work has explored the application of enterprise middleware techniques at the edge of the network to address the challenges of delivering complex sensor network solutions over heterogeneous communications infrastructures. In this paper, we develop this approach further into a practicable, semantically rich, model-based design and analysis approach that considers the sensor network and its contained services as a service-oriented architecture. The proposed model enables a systematic approach to service composition, analysis (using domain-specific techniques), and deployment. It also enables cross intelligence domain integration to simplify intelligence gathering, allowing users to express queries in structured natural language (Controlled English).

  2. Analyzing Multimode Wireless Sensor Networks Using the Network Calculus

    Directory of Open Access Journals (Sweden)

    Xi Jin

    2015-01-01

    Full Text Available The network calculus is a powerful tool to analyze the performance of wireless sensor networks. But the original network calculus can only model the single-mode wireless sensor network. In this paper, we combine the original network calculus with the multimode model to analyze the maximum delay bound of the flow of interest in the multimode wireless sensor network. There are two combined methods A-MM and N-MM. The method A-MM models the whole network as a multimode component, and the method N-MM models each node as a multimode component. We prove that the maximum delay bound computed by the method A-MM is tighter than or equal to that computed by the method N-MM. Experiments show that our proposed methods can significantly decrease the analytical delay bound comparing with the separate flow analysis method. For the large-scale wireless sensor network with 32 thousands of sensor nodes, our proposed methods can decrease about 70% of the analytical delay bound.

  3. Wireless Sensor Networks for Ambient Assisted Living

    Directory of Open Access Journals (Sweden)

    Raúl Aquino-Santos

    2013-11-01

    Full Text Available This paper introduces wireless sensor networks for Ambient Assisted Living as a proof of concept. Our workgroup has developed an arrhythmia detection algorithm that we evaluate in a closed space using a wireless sensor network to relay the information collected to where the information can be registered, monitored and analyzed to support medical decisions by healthcare providers. The prototype we developed is then evaluated using the TelosB platform. The proposed architecture considers very specific restrictions regarding the use of wireless sensor networks in clinical situations. The seamless integration of the system architecture enables both mobile node and network configuration, thus providing the versatile and robust characteristics necessary for real-time applications in medical situations. Likewise, this system architecture efficiently permits the different components of our proposed platform to interact efficiently within the parameters of this study.

  4. Adaptive computational resource allocation for sensor networks

    Institute of Scientific and Technical Information of China (English)

    WANG Dian-hong; FEI E; YAN Yu-jie

    2008-01-01

    To efficiently utilize the limited computational resource in real-time sensor networks, this paper focu-ses on the challenge of computational resource allocation in sensor networks and provides a solution with the method of economies. It designs a mieroeconomic system in which the applications distribute their computational resource consumption across sensor networks by virtue of mobile agent. Further, it proposes the market-based computational resource allocation policy named MCRA which satisfies the uniform consumption of computational energy in network and the optimal division of the single computational capacity for multiple tasks. The simula-tion in the scenario of target tracing demonstrates that MCRA realizes an efficient allocation of computational re-sources according to the priority of tasks, achieves the superior allocation performance and equilibrium perform-ance compared to traditional allocation policies, and ultimately prolongs the system lifetime.

  5. Low-Power Wireless Sensor Network Infrastructures

    DEFF Research Database (Denmark)

    Hansen, Morten Tranberg

    , and network management which enables construction of low-power wireless sensor network applications. More specifically, these services are designed with the extreme low-power scenarios of the SensoByg project in mind and are implemented as follows. First, low-power communication is implemented with Auto......Advancements in wireless communication and electronics improving form factor and hardware capabilities has expanded the applicability of wireless sensor networks. Despite these advancements, devices are still limited in terms of energy which creates the need for duty-cycling and low-power protocols...... in order to achieve the wanted lifetimes. Through more than a decade of wireless sensor network research, progress towards realizing wanted lifetimes have been made and wireless standards for packet formatting and routing have been proposed. With standards in place, the wide-span between programming...

  6. Secure Routing in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Soumyashree Sahoo

    2012-01-01

    Full Text Available Wireless sensor networks is the new concept in the field of networks consists of small, large number of sensing nodes which is having the sensing, computational and transmission power. Due to lack of tamper-resistant infrastructure and the insecure nature of wireless communication channels, these networks are vulnerable to internal and external attacks. Key Management is a major challenge to achieve security in wireless sensor networks. Key management includes the process of key setup, the initial distribution of keys and keys revocation. To provide security and proper routing or communication should be encrypted and authenticated. It is not easy to achieve secure key establishment without public key cryptography. In this thesis, some key management schemes have been purposed which will be valuable for secure routing between different sensor nodes.

  7. Automatic decision support in heterogeneous sensor networks

    Science.gov (United States)

    Kozma, Robert; Tanigawa, Timothy; Furxhi, Orges; Consul, Sergi

    2012-06-01

    There is a need to model complementary aspects of various data channels in distributed sensor networks in order to provide efficient tools of decision support in rapidly changing, dynamic real life scenarios. Our aim is to develop an autonomous cyber-sensing system that supports decision support based on the integration of information from diverse sensory channels. Target scenarios include dismounts performing various peaceful and/or potentially malicious activities. The studied test bed includes Ku band high bandwidth radar for high resolution range data and K band low bandwidth radar for high Doppler resolution data. We embed the physical sensor network in cyber network domain to achieve robust and resilient operation in adversary conditions. We demonstrate the operation of the integrated sensor system using artificial neural networks for the classification of human activities.

  8. Neural network-based sensor signal accelerator.

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, M. C.

    2000-10-16

    A strategy has been developed to computationally accelerate the response time of a generic electronic sensor. The strategy can be deployed as an algorithm in a control system or as a physical interface (on an embedded microcontroller) between a slower responding external sensor and a higher-speed control system. Optional code implementations are available to adjust algorithm performance when computational capability is limited. In one option, the actual sensor signal can be sampled at the slower rate with adaptive linear neural networks predicting the sensor's future output and interpolating intermediate synthetic output values. In another option, a synchronized collection of predictors sequentially controls the corresponding synthetic output voltage. Error is adaptively corrected in both options. The core strategy has been demonstrated with automotive oxygen sensor data. A prototype interface device is under construction. The response speed increase afforded by this strategy could greatly offset the cost of developing a replacement sensor with a faster physical response time.

  9. Design of a low-cost underwater acoustic modem for short- range sensor networks

    OpenAIRE

    Benson, Bridget

    2010-01-01

    Small, dense, wireless sensor networks are beginning to revolutionize our understanding of the physical world by providing fine resolution sampling of the surrounding environment. The ability to have many small devices streaming real-time data physically distributed near the objects being sensed brings new opportunities to observe and act on the world which could provide significant benefits to mankind. While wireless sensor-net systems are beginning to be fielded in applications today on the...

  10. Dense distributed processing in a hindlimb scratch motor network

    DEFF Research Database (Denmark)

    Guzulaitis, Robertas; Hounsgaard, Jørn Dybkjær

    2014-01-01

    In reduced preparations, hindlimb movements can be generated by a minimal network of neurons in the limb innervating spinal segments. The network of neurons that generates real movements is less well delineated. In an ex vivo carapace-spinal cord preparation from adult turtles (Trachemys scripta ...... of a distributed motor network that secures motor coherence.......In reduced preparations, hindlimb movements can be generated by a minimal network of neurons in the limb innervating spinal segments. The network of neurons that generates real movements is less well delineated. In an ex vivo carapace-spinal cord preparation from adult turtles (Trachemys scripta...... elegans), we show that ventral horn interneurons in mid-thoracic spinal segments are functionally integrated in the hindlimb scratch network. First, mid-thoracic interneurons receive intense synaptic input during scratching and behave like neurons in the hindlimb enlargement. Second, some mid...

  11. ENERGY EFFICIENCY AND ROUTING IN SENSOR NETWORKS

    DEFF Research Database (Denmark)

    Cetin, Bilge Kartal

    for dierent network parameters is de- veloped by considering a duty-cycling mechanism in the network. Upper bound on network lifetime is sought by considering idle and sleep mode energy consumption as well as energy consumption in transmission and reception for sensor networks. The solution of the developed...... optimization problems gives an analytical benchmark for designing of maximum lifetime routing algorithms by giving the most energy balanced trac allocation between the possible routes in the network by considering a duty-cycling mechanism. Lastly, an energy ecient routing protocol is proposed and evaluated...

  12. Mesh Generation from Dense 3D Scattered Data Using Neural Network

    Institute of Scientific and Technical Information of China (English)

    ZHANGWei; JIANGXian-feng; CHENLi-neng; MAYa-liang

    2004-01-01

    An improved self-organizing feature map (SOFM) neural network is presented to generate rectangular and hexagonal lattic with normal vector attached to each vertex. After the neural network was trained, the whole scattered data were divided into sub-regions where classified core were represented by the weight vectors of neurons at the output layer of neural network. The weight vectors of the neurons were used to approximate the dense 3-D scattered points, so the dense scattered points could be reduced to a reasonable scale, while the topological feature of the whole scattered points were remained.

  13. High yield, controlled synthesis of graphitic networks from dense micro emulsions

    NARCIS (Netherlands)

    Negro, E.; Dieci, M.; Sordi, D.; Kowlgi, K.; Makkee, M.; Koper, G.J.M.

    2014-01-01

    We report on the production of Carbon Nano Networks (CNNs) from dense microemulsions in which catalyst nanoparticles have been synthesized. CNNs are 3D carbon networks, consisting of branches and junctions, and are mesoporous, graphitic, and conductive being suitable as electrode materials.

  14. Target Coverage in Wireless Sensor Networks with Probabilistic Sensors.

    Science.gov (United States)

    Shan, Anxing; Xu, Xianghua; Cheng, Zongmao

    2016-08-27

    Sensing coverage is a fundamental problem in wireless sensor networks (WSNs), which has attracted considerable attention. Conventional research on this topic focuses on the 0/1 coverage model, which is only a coarse approximation to the practical sensing model. In this paper, we study the target coverage problem, where the objective is to find the least number of sensor nodes in randomly-deployed WSNs based on the probabilistic sensing model. We analyze the joint detection probability of target with multiple sensors. Based on the theoretical analysis of the detection probability, we formulate the minimum ϵ-detection coverage problem. We prove that the minimum ϵ-detection coverage problem is NP-hard and present an approximation algorithm called the Probabilistic Sensor Coverage Algorithm (PSCA) with provable approximation ratios. To evaluate our design, we analyze the performance of PSCA theoretically and also perform extensive simulations to demonstrate the effectiveness of our proposed algorithm.

  15. Optical network of silicon micromachined sensors

    Science.gov (United States)

    Wilson, Mark L.; Burns, David W.; Zook, J. David

    1996-03-01

    The Honeywell Technology Center, in collaboration with the University of Wisconsin and the Mobil Corporation, and under funding from this ARPA sponsored program, are developing a new type of `hybrid' micromachined silicon/fiber optic sensor that utilizes the best attributes of each technology. Fiber optics provide a noise free method to read out the sensor without electrical power required at the measurement point. Micromachined silicon sensor techniques provide a method to design many different types of sensors such as temperature, pressure, acceleration, or magnetic field strength and report the sensor data using FDM methods. Our polysilicon resonant microbeam structures have a built in Fabry-Perot interferometer that offers significant advantages over other configurations described in the literature. Because the interferometer is an integral part of the structure, the placement of the fiber becomes non- critical, and packaging issues become considerably simpler. The interferometer spacing are determined by the thin-film fabrication processes and therefore can be extremely well controlled. The main advantage, however, is the integral vacuum cavity that ensures high Q values. Testing results have demonstrated relaxed alignment tolerances in packaging these devices, with an excellent Signal to Noise Ratio. Networks of 16 or more sensors are currently being developed. STORM (Strain Transduction by Optomechanical Resonant Microbeams) sensors can also provide functionality and self calibration information which can be used to improve the overall system reliability. Details of the sensor and network design, as well as test results, are presented.

  16. Autonomous vision networking: miniature wireless sensor networks with imaging technology

    Science.gov (United States)

    Messinger, Gioia; Goldberg, Giora

    2006-09-01

    The recent emergence of integrated PicoRadio technology, the rise of low power, low cost, System-On-Chip (SOC) CMOS imagers, coupled with the fast evolution of networking protocols and digital signal processing (DSP), created a unique opportunity to achieve the goal of deploying large-scale, low cost, intelligent, ultra-low power distributed wireless sensor networks for the visualization of the environment. Of all sensors, vision is the most desired, but its applications in distributed sensor networks have been elusive so far. Not any more. The practicality and viability of ultra-low power vision networking has been proven and its applications are countless, from security, and chemical analysis to industrial monitoring, asset tracking and visual recognition, vision networking represents a truly disruptive technology applicable to many industries. The presentation discusses some of the critical components and technologies necessary to make these networks and products affordable and ubiquitous - specifically PicoRadios, CMOS imagers, imaging DSP, networking and overall wireless sensor network (WSN) system concepts. The paradigm shift, from large, centralized and expensive sensor platforms, to small, low cost, distributed, sensor networks, is possible due to the emergence and convergence of a few innovative technologies. Avaak has developed a vision network that is aided by other sensors such as motion, acoustic and magnetic, and plans to deploy it for use in military and commercial applications. In comparison to other sensors, imagers produce large data files that require pre-processing and a certain level of compression before these are transmitted to a network server, in order to minimize the load on the network. Some of the most innovative chemical detectors currently in development are based on sensors that change color or pattern in the presence of the desired analytes. These changes are easily recorded and analyzed by a CMOS imager and an on-board DSP processor

  17. Synchronized Data Aggregation for Wireless Sensor Network

    DEFF Research Database (Denmark)

    Dnyaneshwar, Mantri; Prasad, Neeli R.; Prasad, Ramjee

    2014-01-01

    Wireless Sensor Networks (WSNs) are used for monitoring and data collection purposes. A key challenge in effective data collection is to schedule and synchronize the activities of the nodes with global clock. This paper proposes the Synchronized Data Aggregation Algorithm (SDA) using spanning tree...... mechanism. It provides network-wide time synchronization for sensor network. In the initial stage algorithm established the hierarchical structure in the network and then perform the pair - wise synchronization. SDA aggregate data with a global time scale throughout the network. The aggregated packets...... are scheduled using TDMA as the MAC layer protocol. Simulation results show that, SDA gives promising result of energy efficiency and delay as compared with state-of-the-art solutions....

  18. A COMPARATIVE STUDY IN WIRELESS SENSOR NETWORKS

    Directory of Open Access Journals (Sweden)

    Hasan Al-Refai

    2014-02-01

    Full Text Available Sensor networks consist of a large number of small, low-powered wireless nodes with limited computation, communication, and sensing abilities, in a battery-powered sensor network, energy and communication bandwidth are a precious resources. Thus, there is a need to adapt the networking process to match the application in order to minimize the resources consumed and extend the life of the network. In this paper, we introduce a comparative study in different routing algorithms that propose vital solutions to the most important issues that should be taken into account when designing wireless network which are reliability, lifetime, communication bandwidth, transmission rand, and finally the limited energy issue, so we will introduce their algorithms and discuss how did they propose to solve such of these challenges and finally we will do some evaluation to each approach.

  19. ANALYSIS OF SECURITY THREATS IN WIRELESS SENSOR NETWORK

    National Research Council Canada - National Science Library

    Sahabul Alam; Debashis De

    2014-01-01

    .... The inclusion of wireless communication technology also incurs various types of security threats due to unattended installation of sensor nodes as sensor networks may interact with sensitive data...

  20. Censoring for Bayesian Cooperative Positioning in Dense Wireless Networks

    NARCIS (Netherlands)

    Das, Kallol; Wymeersch, Henk

    2012-01-01

    Cooperative positioning is a promising solution for location-enabled technologies in GPS-challenged environments. However, it suffers from high computational complexity and increased network traffic, compared to traditional positioning approaches. The computational complexity is related to the numbe

  1. Secure Localization and Tracking in Sensor Networks

    Science.gov (United States)

    2008-01-01

    To my parents, Yurng-Der Chang and Shiu-Mei Lee iii Biography Chih-Chieh Geoff Chang was born and raised in a beautiful resort town, Hualien, Taiwan...manufacturing and application needs. Currently, companies like Arch Rock, Crossbow, Dust Networks, Millennial Net, and Moteiv offer various types of sensor...activate one sensor node to make the measurement. This is the beauty of target tracking algorithms. Armed with the known models in (3.1) and (3.2), and

  2. Location Privacy Issues in Wireless Sensor Networks

    Science.gov (United States)

    Kůr, Jiří; Stetsko, Andriy

    We discuss location privacy issues in wireless sensor networks. We consider sensor nodes with more responsible roles and the need to protect locations of such nodes. Available countermeasures against various types of traffic analysis attacks are examined and their problems are identified. We do not propose new traffic analysis resistance technique. Instead, we draw attention to blanks in current situation and identify several open questions, which should be answered in order to ensure location privacy of nodes.

  3. Security Threats in Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Giannetsos, Athanasios

    2011-01-01

    intrusions forms an important part of an integrated approach to network security. In this work, we start by considering the problem of cooperative intrusion detection in WSNs and develop a lightweight ID system, called LIDeA, which follows an intelligent agent-based architecture. We show how such a system....... Security and privacy are rapidly replacing performance as the first and foremost concern in many sensor networking scenarios. While security prevention is important, it cannot guarantee that attacks will not be launched and that, once launched, they will not be successful. Therefore, detection of malicious...... networks are. Motivated by this unexplored security aspect, we investigate a new set of memory related vulnerabilities for sensor embedded devices that, if exploited, can lead to the execution of software-based attacks. We demonstrate how to execute malware on wireless sensor nodes that are based...

  4. Time Synchronization for Mobile Underwater Sensor Networks

    Directory of Open Access Journals (Sweden)

    Ying Guo

    2013-01-01

    Full Text Available Time synchronization is very crucial for the implementation of energy constricted underwater wireless sensor networks (UWSN. The purpose of this paper is to present a time synchronization algorithm which is suitable to UWSN. Although several time synchronization protocols have been developed, most of them tend to break down when implemented on mobile underwater sensor networks. In this paper, we analyze the effect of node mobility, and propose a Mobile Counteracted Time Synchronization approach, called “Mc-Sync”, which is a novel time synchronization scheme for mobile underwater acoustic sensor networks. It makes use of two mobile reference nodes to counteract the effect of node mobility. We also analyze and design the optimized trajectories of the two mobile reference nodes in underwater environment. We show through analysis and simulation that Mc-Sync provides much better performance than existing schemes.

  5. Smart Sensor Network System For Environment Monitoring

    Directory of Open Access Journals (Sweden)

    Javed Ali Baloch

    2012-07-01

    Full Text Available SSN (Smart Sensor Network systems could be used to monitor buildings with modern infrastructure, plant sites with chemical pollution, horticulture, natural habitat, wastewater management and modern transport system. To sense attributes of phenomena and make decisions on the basis of the sensed value is the primary goal of such systems. In this paper a Smart Spatially aware sensor system is presented. A smart system, which could continuously monitor the network to observe the functionality and trigger, alerts to the base station if a change in the system occurs and provide feedback periodically, on demand or even continuously depending on the nature of the application. The results of the simulation trials presented in this paper exhibit the performance of a Smart Spatially Aware Sensor Networks.

  6. Optical networks for wideband sensor array

    Science.gov (United States)

    Sheng, Lin Horng

    2011-12-01

    This thesis presents the realization of novel systems for optical sensing networks with an array of long-period grating (LPG) sensors. As a launching point of the thesis, the motivation to implement optical sensing network in precisely catering LPG sensors is presented. It highlights the flexibility of the sensing network to act as the foundation in order to boost the application of the various LPG sensor design in biological and chemical sensing. After the thorough study on the various optical sensing networks, sub-carrier multiplexing (SCM) and optical time division multiplexing (OTDM) schemes are adopted in conjunction with tunable laser source (TLS) to facilitate simultaneous interrogation of the LPG sensors array. In fact, these systems are distinct to have the capability to accommodate wideband optical sensors. Specifically, the LPG sensors which is in 20nm bandwidth are identified to operate in these systems. The working principles of the systems are comprehensively elucidated in this thesis. It highlights the mathematical approach to quantify the experimental setup of the optical sensing network. Additionally, the system components of the designs are identified and methodically characterized so that the components well operate in the designed environment. A mockup has been setup to demonstrate the application in sensing of various liquid indices and analyse the response of the LPG sensors in order to evaluate the performance of the systems. Eventually, the resemblance of the demultiplexed spectral response to the pristine spectral response are quantified to have excellent agreement. Finally, the promising result consistency of the systems is verified through repeatability test.

  7. Operating systems and network protocols for wireless sensor networks.

    Science.gov (United States)

    Dutta, Prabal; Dunkels, Adam

    2012-01-13

    Sensor network protocols exist to satisfy the communication needs of diverse applications, including data collection, event detection, target tracking and control. Network protocols to enable these services are constrained by the extreme resource scarcity of sensor nodes-including energy, computing, communications and storage-which must be carefully managed and multiplexed by the operating system. These challenges have led to new protocols and operating systems that are efficient in their energy consumption, careful in their computational needs and miserly in their memory footprints, all while discovering neighbours, forming networks, delivering data and correcting failures.

  8. Lifetime Prolonging Algorithms for Underwater Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    GUO Zhong-wen; LI Zhi-wei; YU Lei

    2006-01-01

    Underwater acoustic modem technology has attained a level of maturity to support underwater acoustic sensor networks (UASNs) which are generally formed by acoustically connected sensor nodes and a surface station providing a link to an on-shore control center. While many applications require long-term monitoring of the deployment area, the battery-powered network nodes limit the lifetime of UASNs. Therefore, designing a UASN that minimizes the power consumption while maximizing lifetime becomes a very difficult task. In this paper, a method is proposed to determine the optimum number of clusters through combining an application-specific protocol architecture and underwater acoustic communication model so as to reduce the energy dissipation of UASNs. Deploying more sensor nodes which work alternately is another way to prolong the lifetime of UASNs. An algorithm is presented for selecting sensor nodes and putting them into operation in each round, ensuring the monitoring to the whole given area. The present results show that the algorithm can help prolong system lifetime remarkably when it is applied to other conventional approaches for sensor networks under the condition that the sensor node density is high.

  9. From Simple to Smart: The Development of Sensor Network

    Institute of Scientific and Technical Information of China (English)

    Ping Liu; Xunxiang Huang; Feng Liu; Lianghua Zhang

    2006-01-01

    Sensor networks have come a long way since the first point-to-point analog system. Rapid development of industrial applications imposes more challenges on traditional sensors and sensor networks. And World Wide Web browsers and object-oriented programming techniques are also helping shaping the next generation of sensor networks. As a trend, smart sensor networks are getting more attention in industrial areas for the values they can bring into us. The IEEE 1451 family of smart sensor interface standards tends to resolve the issues and problems associated with the proliferation and the heterogeneity of sensor networks. The evolution and current state of the art of sensor networks is captured in this article, where the characteristics of their generations are discussed under the networking technologies. It is also pointed out that the challenges sensor networks will face and intends of this field.

  10. Dynamic Coverage of Mobile Sensor Networks

    CERN Document Server

    Liu, Benyuan; Nain, Philippe; Towsley, Don

    2011-01-01

    In this paper we study the dynamic aspects of the coverage of a mobile sensor network resulting from continuous movement of sensors. As sensors move around, initially uncovered locations are likely to be covered at a later time. A larger area is covered as time continues, and intruders that might never be detected in a stationary sensor network can now be detected by moving sensors. However, this improvement in coverage is achieved at the cost that a location is covered only part of the time, alternating between covered and not covered. We characterize area coverage at specific time instants and during time intervals, as well as the time durations that a location is covered and uncovered. We further characterize the time it takes to detect a randomly located intruder. For mobile intruders, we take a game theoretic approach and derive optimal mobility strategies for both sensors and intruders. Our results show that sensor mobility brings about unique dynamic coverage properties not present in a stationary sens...

  11. Querying moving objects detected by sensor networks

    CERN Document Server

    Bestehorn, Markus

    2012-01-01

    Declarative query interfaces to Sensor Networks (SN) have become a commodity. These interfaces allow access to SN deployed for collecting data using relational queries. However, SN are not confined to data collection, but may track object movement, e.g., wildlife observation or traffic monitoring. While rational approaches are well suited for data collection, research on ""Moving Object Databases"" (MOD) has shown that relational operators are unsuitable to express information needs on object movement, i.e., spatio-temporal queries. ""Querying Moving Objects Detected by Sensor Networks"" studi

  12. Stochastic Congestion Control in Wireless Sensor Networks

    Science.gov (United States)

    Kim, Hyung Seok; Lee, Seok; Kim, Namhoon

    In this paper, an effective congestion control algorithm is proposed to increase the end-to-end delivery success ratio of upstream traffic by reduction of buffer drop probabilities and their deviation in wireless sensor networks. According to the queue length of parent and child nodes, each child node chooses one of the parents as the next hop to the sink and controls the delay before transmission begins. It balances traffics among parents and mitigates congestion based on congestion level of a node. Simulation results show that the proposed algorithm reduces buffer drop probabilities and their deviation and increases the end-to-end delivery success ratio in wireless sensor networks.

  13. NEURON: Enabling Autonomicity in Wireless Sensor Networks

    Science.gov (United States)

    Zafeiropoulos, Anastasios; Gouvas, Panagiotis; Liakopoulos, Athanassios; Mentzas, Gregoris; Mitrou, Nikolas

    2010-01-01

    Future Wireless Sensor Networks (WSNs) will be ubiquitous, large-scale networks interconnected with the existing IP infrastructure. Autonomic functionalities have to be designed in order to reduce the complexity of their operation and management, and support the dissemination of knowledge within a WSN. In this paper a novel protocol for energy efficient deployment, clustering and routing in WSNs is proposed that focuses on the incorporation of autonomic functionalities in the existing approaches. The design of the protocol facilitates the design of innovative applications and services that are based on overlay topologies created through cooperation among the sensor nodes. PMID:22399931

  14. NEURON: Enabling Autonomicity in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Anastasios Zafeiropoulos

    2010-05-01

    Full Text Available Future Wireless Sensor Networks (WSNs will be ubiquitous, large-scale networks interconnected with the existing IP infrastructure. Autonomic functionalities have to be designed in order to reduce the complexity of their operation and management, and support the dissemination of knowledge within a WSN. In this paper a novel protocol for energy efficient deployment, clustering and routing in WSNs is proposed that focuses on the incorporation of autonomic functionalities in the existing approaches. The design of the protocol facilitates the design of innovative applications and services that are based on overlay topologies created through cooperation among the sensor nodes.

  15. Prediction-based association control scheme in dense femtocell networks

    Science.gov (United States)

    Pham, Ngoc-Thai; Huynh, Thong; Hwang, Won-Joo; You, Ilsun; Choo, Kim-Kwang Raymond

    2017-01-01

    The deployment of large number of femtocell base stations allows us to extend the coverage and efficiently utilize resources in a low cost manner. However, the small cell size of femtocell networks can result in frequent handovers to the mobile user, and consequently throughput degradation. Thus, in this paper, we propose predictive association control schemes to improve the system’s effective throughput. Our design focuses on reducing handover frequency without impacting on throughput. The proposed schemes determine handover decisions that contribute most to the network throughput and are proper for distributed implementations. The simulation results show significant gains compared with existing methods in terms of handover frequency and network throughput perspective. PMID:28328992

  16. Data Dissemination in Wireless Sensor Networks with Network Coding

    Directory of Open Access Journals (Sweden)

    Xiumin Wang

    2010-01-01

    Full Text Available In wireless sensor networks (WSNs, it is often necessary to update the software running on sensors, which requires reliable dissemination of large data objects to each sensor with energy efficiency. During data dissemination, due to sleep scheduling designed for energy efficiency, some sensors may not receive some packets at some time slots. In the meantime, due to the unreliability of wireless communication, a sensor may not successfully receive a packet even when it is in the active mode. Thus, retransmission of such packets to those sensors is necessary, which consumes more energy and increases the delay of data dissemination cycle. In this paper, we propose a network coding-based approach in data dissemination such that data dissemination can be accomplished at the earliest time. Thus, less energy is consumed and the delay can be decreased. The impact of packet loss probability and the sleep probability of sensors on the network coding gain is analyzed. A threshold is also given to decide whether the current sleep scheduling is effective on energy saving in data dissemination process or not. Simulation results demonstrate the effectiveness and scalability of the proposed work.

  17. Energy Consumption in Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    JIN Yan; WANG Ling; YANG Xiao-zong; WEN Dong-xin

    2007-01-01

    Wireless sensor networks (WSNs) can be used to collect surrounding data by multi-hop. As sensor networks have the constrained and not rechargeable energy resource, energy efficiency is an important design issue for its topology. In this paper, the energy consumption issue under the different topology is studied. We derive the exact mathematical expression of energy consumption for the fiat and clustering scheme, respectively. Then the energy consumptions of different schemes are compared. By the comparison, multi-level clustering scheme is more energy efficient in large scale networks. Simulation results demonstrate that our analysis is correct from the view of prolonging the large-scale network lifetime and achieving more power reductions.

  18. EMMNet: sensor networking for electricity meter monitoring.

    Science.gov (United States)

    Lin, Zhi-Ting; Zheng, Jie; Ji, Yu-Sheng; Zhao, Bao-Hua; Qu, Yu-Gui; Huang, Xu-Dong; Jiang, Xiu-Fang

    2010-01-01

    Smart sensors are emerging as a promising technology for a large number of application domains. This paper presents a collection of requirements and guidelines that serve as a basis for a general smart sensor architecture to monitor electricity meters. It also presents an electricity meter monitoring network, named EMMNet, comprised of data collectors, data concentrators, hand-held devices, a centralized server, and clients. EMMNet provides long-distance communication capabilities, which make it suitable suitable for complex urban environments. In addition, the operational cost of EMMNet is low, compared with other existing remote meter monitoring systems based on GPRS. A new dynamic tree protocol based on the application requirements which can significantly improve the reliability of the network is also proposed. We are currently conducting tests on five networks and investigating network problems for further improvements. Evaluation results indicate that EMMNet enhances the efficiency and accuracy in the reading, recording, and calibration of electricity meters.

  19. Optimizing Retransmission Threshold in Wireless Sensor Networks.

    Science.gov (United States)

    Bi, Ran; Li, Yingshu; Tan, Guozhen; Sun, Liang

    2016-05-10

    The retransmission threshold in wireless sensor networks is critical to the latency of data delivery in the networks. However, existing works on data transmission in sensor networks did not consider the optimization of the retransmission threshold, and they simply set the same retransmission threshold for all sensor nodes in advance. The method did not take link quality and delay requirement into account, which decreases the probability of a packet passing its delivery path within a given deadline. This paper investigates the problem of finding optimal retransmission thresholds for relay nodes along a delivery path in a sensor network. The object of optimizing retransmission thresholds is to maximize the summation of the probability of the packet being successfully delivered to the next relay node or destination node in time. A dynamic programming-based distributed algorithm for finding optimal retransmission thresholds for relay nodes along a delivery path in the sensor network is proposed. The time complexity is O n Δ · max 1 ≤ i ≤ n { u i } , where u i is the given upper bound of the retransmission threshold of sensor node i in a given delivery path, n is the length of the delivery path and Δ is the given upper bound of the transmission delay of the delivery path. If Δ is greater than the polynomial, to reduce the time complexity, a linear programming-based ( 1 + p m i n ) -approximation algorithm is proposed. Furthermore, when the ranges of the upper and lower bounds of retransmission thresholds are big enough, a Lagrange multiplier-based distributed O ( 1 ) -approximation algorithm with time complexity O ( 1 ) is proposed. Experimental results show that the proposed algorithms have better performance.

  20. Target Tracking In Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sunita Gola

    2012-09-01

    Full Text Available The problem being tackled here relates to the problem of target tracking in wireless sensor networks. It is a specific problem in localization. Localization primarily refers to the detection of spatial coordinates of a node or an object. Target tracking deals with finding spatial coordinates of a moving object and being able to track its movements. In the tracking scheme illustrated, sensors are deployed in a triangular fashion in a hexagonal mesh such that the hexagon is divided into a number of equilateral triangles. The technique used for detection is the trilateration technique in which intersection of three circles is used to determine the object location. While the object is being tracked by three sensors, distance to it from a fourth sensor is also being calculated simultaneously. The difference is that closest three sensors detect at a frequency of one second while the fourth sensor detects the object location at twice the frequency. Using the distance information from the fourth sensor and a simple mathematical technique, location of object ispredicted for every half second as well. The key thing to note is that the forth sensor node is not used for detection but only for estimation of the object at half second intervals and hence does not utilize much power. Using this technique, tracking capability of the system is increased.

  1. Real-Time Sensor-Actuator Networks

    OpenAIRE

    Sastry, Shivakumar; S. S. Iyengar

    2005-01-01

    Emerging technologies offer new paradigms for computation, control, collaboration, and communication. To realize the full potential of these technologies in industry, defense, and homeland security applications, it is necessary to exploit the real-time distributed computing capabilities of sensor-actuator networks. To reliably design and develop such networks, it is necessary to develop deeper insight into the underlying model for real-time computation and the infrastructure at the node level...

  2. Underwater sensor networks: applications, advances and challenges.

    Science.gov (United States)

    Heidemann, John; Stojanovic, Milica; Zorzi, Michele

    2012-01-13

    This paper examines the main approaches and challenges in the design and implementation of underwater wireless sensor networks. We summarize key applications and the main phenomena related to acoustic propagation, and discuss how they affect the design and operation of communication systems and networking protocols at various layers. We also provide an overview of communications hardware, testbeds and simulation tools available to the research community.

  3. Wireless Sensor Networks for High Fidelity Sampling

    Science.gov (United States)

    2007-07-20

    Seismological Laboratory underground seismometer calibration vault. Testing showed that the SiliconDesigns 1221L devices have a noise floor of 32µG...wireless sensor networks. In SIGCOMM 2006, Pisa, Italy , August 2006. [74] Luigi Rizzo. Effective erasure codes for reliable computer communication proto...Proceedings of the seventh annual international conference on Mobile computing and networking, Rome, Italy , July 2001. [86] Alec Woo, Terence Tong, and

  4. Toward controlling perturbations in robotic sensor networks

    Science.gov (United States)

    Banerjee, Ashis G.; Majumder, Saikat R.

    2014-06-01

    Robotic sensor networks (RSNs), which consist of networks of sensors placed on mobile robots, are being increasingly used for environment monitoring applications. In particular, a lot of work has been done on simultaneous localization and mapping of the robots, and optimal sensor placement for environment state estimation1. The deployment of RSNs, however, remains challenging in harsh environments where the RSNs have to deal with significant perturbations in the forms of wind gusts, turbulent water flows, sand storms, or blizzards that disrupt inter-robot communication and individual robot stability. Hence, there is a need to be able to control such perturbations and bring the networks to desirable states with stable nodes (robots) and minimal operational performance (environment sensing). Recent work has demonstrated the feasibility of controlling the non-linear dynamics in other communication networks like emergency management systems and power grids by introducing compensatory perturbations to restore network stability and operation2. In this paper, we develop a computational framework to investigate the usefulness of this approach for RSNs in marine environments. Preliminary analysis shows promising performance and identifies bounds on the original perturbations within which it is possible to control the networks.

  5. Distributed estimation of sensors position in underwater wireless sensor network

    Science.gov (United States)

    Zandi, Rahman; Kamarei, Mahmoud; Amiri, Hadi

    2016-05-01

    In this paper, a localisation method for determining the position of fixed sensor nodes in an underwater wireless sensor network (UWSN) is introduced. In this simple and range-free scheme, the node localisation is achieved by utilising an autonomous underwater vehicle (AUV) that transverses through the network deployment area, and that periodically emits a message block via four directional acoustic beams. A message block contains the actual known AUV position as well as a directional dependent marker that allows a node to identify the respective transmit beam. The beams form a fixed angle with the AUV body. If a node passively receives message blocks, it could calculate the arithmetic mean of the coordinates existing in each messages sequence, to find coordinates at two different time instants via two different successive beams. The node position can be derived from the two computed positions of the AUV. The major advantage of the proposed localisation algorithm is that it is silent, which leads to energy efficiency for sensor nodes. The proposed method does not require any synchronisation among the nodes owing to being silent. Simulation results, using MATLAB, demonstrated that the proposed method had better performance than other similar AUV-based localisation methods in terms of the rates of well-localised sensor nodes and positional root mean square error.

  6. Autonomic Context-Aware Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Nídia G. S. Campos

    2015-01-01

    Full Text Available Autonomic Computing allows systems like wireless sensor networks (WSN to self-manage computing resources in order to extend their autonomy as much as possible. In addition, contextualization tasks can fuse two or more different sensor data into a more meaningful information. Since these tasks usually run in a single centralized context server (e.g., sink node, the massive volume of data generated by the wireless sensors can lead to a huge information overload in such server. Here we propose DAIM, a distributed autonomic inference machine distributed which allows the sensor nodes to do self-management and contextualization tasks based on fuzzy logic. We have evaluated DAIM in a real sensor network taking into account other inference machines. Experimental results illustrate that DAIM is an energy-efficient contextualization method for WSN, reducing 48.8% of the number of messages sent to the context servers while saving 19.5% of the total amount of energy spent in the network.

  7. Design of intelligent multinode Sensor networking

    Directory of Open Access Journals (Sweden)

    Mr. N.Suresh kumar

    2010-05-01

    Full Text Available The paper deals with the self configured intelligent sensor networking. The individual sensors are acting on the body or an object to measure different parameters. Although the sensors are measuring parameters accurately, but they are failed to act depending on different situations. For example a robot is moving on a surface can take decision to turn left or right when an obstacle come across. But the same robots take wrong decision when the obstacle is not static. The robot can wait till the obstacle passed away fromits way. But the robot still follows the traditional way, which is turning left or turn. In this case the robot is failed to take correct decision depending on the situation. If we consider other example such as traditional automatic water supply to plants orcrops, the system supplies the water at regular intervals of time with accurate quantity. But the system takes same decisions in all seasons irrespective of the soil type and crop type. In oursystem we are proposing a Wireless Distributing sensor system design which is able to take wise decisions as a farmer. A farmer can understands how much water the soil needs and at what time itneed to apply. In our work, we are developing, (1 Home Area Networking (2software supporting above functions; (3 Wireless Sensor Networking.

  8. FALCON or how to compute measures time efficiently on dynamically evolving dense complex networks?

    Science.gov (United States)

    Franke, R; Ivanova, G

    2014-02-01

    A large number of topics in biology, medicine, neuroscience, psychology and sociology can be generally described via complex networks in order to investigate fundamental questions of structure, connectivity, information exchange and causality. Especially, research on biological networks like functional spatiotemporal brain activations and changes, caused by neuropsychiatric pathologies, is promising. Analyzing those so-called complex networks, the calculation of meaningful measures can be very long-winded depending on their size and structure. Even worse, in many labs only standard desktop computers are accessible to perform those calculations. Numerous investigations on complex networks regard huge but sparsely connected network structures, where most network nodes are connected to only a few others. Currently, there are several libraries available to tackle this kind of networks. A problem arises when not only a few big and sparse networks have to be analyzed, but hundreds or thousands of smaller and conceivably dense networks (e.g. in measuring brain activation over time). Then every minute per network is crucial. For these cases there several possibilities to use standard hardware more efficiently. It is not sufficient to apply just standard algorithms for dense graph characteristics. This article introduces the new library FALCON developed especially for the exploration of dense complex networks. Currently, it offers 12 different measures (like clustering coefficients), each for undirected-unweighted, undirected-weighted and directed-unweighted networks. It uses a multi-core approach in combination with comprehensive code and hardware optimizations. There is an alternative massively parallel GPU implementation for the most time-consuming measures, too. Finally, a comparing benchmark is integrated to support the choice of the most suitable library for a particular network issue. Copyright © 2013 Elsevier Inc. All rights reserved.

  9. A Wireless Sensor Network For Soil Monitoring

    Science.gov (United States)

    Szlavecz, K.; Cogan, J.; Musaloiu-Elefteri, R.; Small, S.; Terzis, A.; Szalay, A.

    2005-12-01

    The most spatially complex stratum of a terrestrial ecosystem is its soil. Among the major challenges of studying the soil ecosystem are the diversity and the cryptic nature of biota, and the enormous heterogeneity of the soil substrate. Often this patchiness drives spatial distribution of soil organisms, yet our knowledge on the spatio-temporal patterns of soil conditions is limited. To monitor the environmental conditions at biologically meaningful spatial scales we have developed and deployed a wireless sensor network of thirty nodes. Each node is based on a MICAz mote connected to a custom-built sensor suite that includes a Watermark soil moisture sensor, an Irrometer soil temperature sensor, and sensors capable of recording ambient temperature and light intensity. To assess CO2 production at the ground level a subset of the nodes is equipped with Telaire 6004 CO2 sensor. We developed the software running on the motes from scratch, using the TinyOS development environment. Each mote collects measurements every minute, and stores them persistently in a non-volatile memory. The decision to store data locally at each node enables us to reliably retrieve the data in the face of network losses and premature node failures due to power depletion. Collected measurements are retrieved over the wireless network through a PC-class computer acting as a gateway between the sensor network and the Internet. Considering that motes are battery powered, the largest obstacle hindering long-term sensor network deployments is power consumption. To address this problem, our software powers down sensors between sampling cycles and turns off the radio (the most energy prohibitive mote component) when not in use. By doing so we were able to increase node lifetime by a factor of ten. We collected field data over several weeks. The data was ingested into a SQL Server database, which provides data access through a .NET web services interface. The database provides functions for spatial

  10. Cognitive Radio-Based Vehicular Ad Hoc and Sensor Networks

    National Research Council Canada - National Science Library

    Jalil Piran, Mohammad; Cho, Yongwoo; Yun, Jihyeok; Ali, Amjad; Suh, Doug Young

    2014-01-01

    ... the spectrum scarcity issue. We have already proposed vehicular ad hoc and sensor networks (VASNET) as a new networking paradigm for vehicular communication by utilizing wireless sensor nodes in two mobile and stationary modes...

  11. Applications of Wireless Sensor Network in Smart Grid

    National Research Council Canada - National Science Library

    Huijun Xu

    2013-01-01

    .... In this paper, we firstly analyzed the characteristics and structures of the smart grid and wireless sensor network, then brought out the applications of wireless sensor network in the smart grid...

  12. Problem solving for wireless sensor networks

    CERN Document Server

    Garcia-Hernando, Ana-Belen; Lopez-Navarro, Juan-Manuel; Prayati, Aggeliki; Redondo-Lopez, Luis

    2008-01-01

    Wireless Sensor Networks (WSN) is an area of huge research interest, attracting substantial attention from industry and academia for its enormous potential and its inherent challenges. This reader-friendly text delivers a comprehensive review of the developments related to the important technological issues in WSN.

  13. Sensor Network Localization with Imprecise Distances

    NARCIS (Netherlands)

    Cao, M.; Morse, A.S.; Anderson, B.D.O.

    2006-01-01

    An approach to formulate geometric relations among distances between nodes as equality constraints is introduced in this paper to study the localization problem with imprecise distance information in sensor networks. These constraints can be further used to formulate optimization problems for distan

  14. Cross-platform wireless sensor network development

    DEFF Research Database (Denmark)

    Hansen, Morten Tranberg; Kusy, Branislav

    -source development environment that takes a holistic approach to implementing sensor network applications. Users build applications using a drag-and-drop visual programming language Open Blocks, a language that Google selected for its App Inventor for Android. Tinylnventor uses cross-platform programming concepts...

  15. Optimizing Key Updates in Sensor Networks

    DEFF Research Database (Denmark)

    Yuksel, Ender; Nielson, Hanne Riis; Nielson, Flemming

    2011-01-01

    Sensor networks offer the advantages of simple and low–resource communication. Nevertheless, security is of particular importance in many cases such as when sensitive data is communicated or tamper-resistance is required. Updating the security keys is one of the key points in security, which rest...

  16. Benchmarking Block Ciphers for Wireless Sensor Networks

    NARCIS (Netherlands)

    Law, Y.W.; Doumen, J.M.; Hartel, P.H.

    2004-01-01

    Choosing the most storage- and energy-efficient block cipher specifically for wireless sensor networks (WSNs) is not as straightforward as it seems. To our knowledge so far, there is no systematic evaluation framework for the purpose. We have identified the candidates of block ciphers suitable for W

  17. Benchmarking Block Ciphers for Wireless Sensor Networks

    NARCIS (Netherlands)

    Law, Y.W.; Doumen, J.M.; Hartel, Pieter H.

    2004-01-01

    Choosing the most storage- and energy-efficient block cipher specifically for wireless sensor networks (WSNs) is not as straightforward as it seems. To our knowledge so far, there is no systematic evaluation framework for the purpose. We have identified the candidates of block ciphers suitable for

  18. Wireless sensor networks dynamic runtime configuration

    NARCIS (Netherlands)

    Dulman, S.O.; Hofmeijer, T.J.; Havinga, Paul J.M.

    2004-01-01

    Current Wireless Sensor Networks (WSN) use fixed layered architectures, that can be modified only at compile time. Using a non-layered architecture, which allows dynamic loading of modules and automatic reconfiguration to adapt to the surrounding environment was believed to be too resource consuming

  19. Cross-platform wireless sensor network development

    DEFF Research Database (Denmark)

    Hansen, Morten Tranberg; Kusy, Branislav

    -source development environment that takes a holistic approach to implementing sensor network applications. Users build applications using a drag-and-drop visual programming language Open Blocks, a language that Google selected for its App Inventor for Android. Tinylnventor uses cross-platform programming concepts...

  20. Clock Synchronization for Multihop Wireless Sensor Networks

    Science.gov (United States)

    Solis Robles, Roberto

    2009-01-01

    In wireless sensor networks, more so generally than in other types of distributed systems, clock synchronization is crucial since by having this service available, several applications such as media access protocols, object tracking, or data fusion, would improve their performance. In this dissertation, we propose a set of algorithms to achieve…

  1. Understanding and managing large sensor networks

    Directory of Open Access Journals (Sweden)

    D. D. Ediriweera

    2010-04-01

    Full Text Available The water supply industry is trialing a range of sensor network designs for monitoring distributed infrastructure. The paper investigates the performance of such a sensor system deployed to monitor a water distribution network. The study reveals up to one fifth of the data intended to be collected either to be missing or erroneous. Findings reinforce the importance of in-depth design consideration of all aspects of large scale sensor systems, and the necessity for expertise on every detail of the system, or access to a rule set which embeds this knowledge allowing non-specialists to make near optimal choices. First steps towards defining such a rule set is presented here with supporting evidence.

  2. Sensor data security level estimation scheme for wireless sensor networks.

    Science.gov (United States)

    Ramos, Alex; Filho, Raimir Holanda

    2015-01-19

    Due to their increasing dissemination, wireless sensor networks (WSNs) have become the target of more and more sophisticated attacks, even capable of circumventing both attack detection and prevention mechanisms. This may cause WSN users, who totally trust these security mechanisms, to think that a sensor reading is secure, even when an adversary has corrupted it. For that reason, a scheme capable of estimating the security level (SL) that these mechanisms provide to sensor data is needed, so that users can be aware of the actual security state of this data and can make better decisions on its use. However, existing security estimation schemes proposed for WSNs fully ignore detection mechanisms and analyze solely the security provided by prevention mechanisms. In this context, this work presents the sensor data security estimator (SDSE), a new comprehensive security estimation scheme for WSNs. SDSE is designed for estimating the sensor data security level based on security metrics that analyze both attack prevention and detection mechanisms. In order to validate our proposed scheme, we have carried out extensive simulations that show the high accuracy of SDSE estimates.

  3. Sensor Data Security Level Estimation Scheme for Wireless Sensor Networks

    Science.gov (United States)

    Ramos, Alex; Filho, Raimir Holanda

    2015-01-01

    Due to their increasing dissemination, wireless sensor networks (WSNs) have become the target of more and more sophisticated attacks, even capable of circumventing both attack detection and prevention mechanisms. This may cause WSN users, who totally trust these security mechanisms, to think that a sensor reading is secure, even when an adversary has corrupted it. For that reason, a scheme capable of estimating the security level (SL) that these mechanisms provide to sensor data is needed, so that users can be aware of the actual security state of this data and can make better decisions on its use. However, existing security estimation schemes proposed for WSNs fully ignore detection mechanisms and analyze solely the security provided by prevention mechanisms. In this context, this work presents the sensor data security estimator (SDSE), a new comprehensive security estimation scheme for WSNs. SDSE is designed for estimating the sensor data security level based on security metrics that analyze both attack prevention and detection mechanisms. In order to validate our proposed scheme, we have carried out extensive simulations that show the high accuracy of SDSE estimates. PMID:25608215

  4. Decentralized system identification using stochastic subspace identification for wireless sensor networks.

    Science.gov (United States)

    Cho, Soojin; Park, Jong-Woong; Sim, Sung-Han

    2015-04-08

    Wireless sensor networks (WSNs) facilitate a new paradigm to structural identification and monitoring for civil infrastructure. Conventional structural monitoring systems based on wired sensors and centralized data acquisition systems are costly for installation as well as maintenance. WSNs have emerged as a technology that can overcome such difficulties, making deployment of a dense array of sensors on large civil structures both feasible and economical. However, as opposed to wired sensor networks in which centralized data acquisition and processing is common practice, WSNs require decentralized computing algorithms to reduce data transmission due to the limitation associated with wireless communication. In this paper, the stochastic subspace identification (SSI) technique is selected for system identification, and SSI-based decentralized system identification (SDSI) is proposed to be implemented in a WSN composed of Imote2 wireless sensors that measure acceleration. The SDSI is tightly scheduled in the hierarchical WSN, and its performance is experimentally verified in a laboratory test using a 5-story shear building model.

  5. Convective rain cell contours inferred from a very dense gauge network

    Science.gov (United States)

    Teschl, Reinhard; Teschl, Franz; Fuchsberger, Jürgen

    2017-04-01

    Statistical information on the size of rain cells is of interest to a variety of disciplines: from meteorology and hydrology to microwave propagation e.g. for planning satellite communication systems. Rain cell size distributions are often based on weather radar data because of the high spatial and temporal resolution. The measuring accuracy of ground-based in situ sensors like rain gauges is admittedly higher, however, typical rain gauge networks exhibit a too coarse grid to adequately capture the spatial variability of precipitation, especially of convective cells. In the course of the present work, data originating from a very dense rain-gauge network was used: WegenerNet is a climate station network in Styria, Austria, consisting of 153 stations within an area of about 20 km × 15 km. The network provides well serviced and supervised datasets since January 2007. Multilevel quality flags are used to indicate integrity and plausibility of the data. Based on the point measurements of rainfall, interpolations on a 200 m × 200 m grid are provided. The detection of rain cells in the grid-data was accomplished by identifying contiguous areas where the rain rate is equal to or higher than a specified threshold value. Once a connected area of a defined magnitude was identified, its dimension was determined and the equivalent circular diameter of the rain cell was calculated. Only rain cells with contours higher than 5 mm per 5 minutes were considered, because the study area with its about 300 square kilometers often did not allow the complete detection of more widespread rainfall events associated with lower intensity contours. In any case it was made sure that rain cells, which were only partially detected, did not distort the results. The period of observation comprises up to now a 7-year timespan from 2010 to 2016. An extension of the period back to 2007 is planned in order to take advantage of full 10 years of high-resolution data. For the analysis only intervals

  6. Wireless multimedia sensor networks on reconfigurable hardware information reduction techniques

    CERN Document Server

    Ang, Li-minn; Chew, Li Wern; Yeong, Lee Seng; Chia, Wai Chong

    2013-01-01

    Traditional wireless sensor networks (WSNs) capture scalar data such as temperature, vibration, pressure, or humidity. Motivated by the success of WSNs and also with the emergence of new technology in the form of low-cost image sensors, researchers have proposed combining image and audio sensors with WSNs to form wireless multimedia sensor networks (WMSNs).

  7. Distributed Estimation, Coding, and Scheduling in Wireless Visual Sensor Networks

    Science.gov (United States)

    Yu, Chao

    2013-01-01

    In this thesis, we consider estimation, coding, and sensor scheduling for energy efficient operation of wireless visual sensor networks (VSN), which consist of battery-powered wireless sensors with sensing (imaging), computation, and communication capabilities. The competing requirements for applications of these wireless sensor networks (WSN)…

  8. Distributed Estimation, Coding, and Scheduling in Wireless Visual Sensor Networks

    Science.gov (United States)

    Yu, Chao

    2013-01-01

    In this thesis, we consider estimation, coding, and sensor scheduling for energy efficient operation of wireless visual sensor networks (VSN), which consist of battery-powered wireless sensors with sensing (imaging), computation, and communication capabilities. The competing requirements for applications of these wireless sensor networks (WSN)…

  9. Intruder Activity Analysis under Unreliable Sensor Networks

    Energy Technology Data Exchange (ETDEWEB)

    Tae-Sic Yoo; Humberto E. Garcia

    2007-09-01

    This paper addresses the problem of counting intruder activities within a monitored domain by a sensor network. The deployed sensors are unreliable. We characterize imperfect sensors with misdetection and false-alarm probabilities. We model intruder activities with Markov Chains. A set of Hidden Markov Models (HMM) models the imperfect sensors and intruder activities to be monitored. A novel sequential change detection/isolation algorithm is developed to detect and isolate a change from an HMM representing no intruder activity to another HMM representing some intruder activities. Procedures for estimating the entry time and the trace of intruder activities are developed. A domain monitoring example is given to illustrate the presented concepts and computational procedures.

  10. Failure Filtrations for Fenced Sensor Networks

    CERN Document Server

    Munch, Elizabeth; Harer, John

    2011-01-01

    In this paper we consider the question of sensor network coverage for a 2-dimensional domain. We seek to compute the probability that a set of sensors fails to cover given only non-metric, local (who is talking to whom) information and a probability distribution of failure of each node. This builds on the work of de Silva and Ghrist who analyzed this problem in the deterministic situation. We first show that a it is part of a slightly larger class of problems which is #P-complete, and thus fast algorithms likely do not exist unless P$=$NP. We then give a deterministic algorithm which is feasible in the case of a small set of sensors, and give a dynamic algorithm for an arbitrary set of sensors failing over time which utilizes a new criterion for coverage based on the one proposed by de Silva and Ghrist. These algorithms build on the theory of topological persistence.

  11. Romanian complex data center for dense seismic network

    Directory of Open Access Journals (Sweden)

    Constantin Ionescu

    2011-04-01

    792.0pt; margin:72.0pt 72.0pt 72.0pt 72.0pt; mso-header-margin:36.0pt; mso-footer-margin:36.0pt; mso-paper-source:0;} div.Section1 {page:Section1;} --> In 2002, the National Institute for Earth Physics started the development of its own real-time digital seismic network. This now consists of 86 seismic stations, of which 32 are broad-band sensors, 52 stations are equipped with short-period sensors, and two seismic arrays, all of which transmit data in real time to the National Data Center (NDC and the Eforie Nord (EFOR seismic observatory. EFOR is the back-up for the NDC, and it is also a monitoring center for Black Sea tsunamis. The seismic stations are equipped with Quanterra Q330 and K2 digitizers, broad-band seismometers (STS2, CMG40T, CMG 3ESP, CMG3T and Episensor Kinemetrics acceleration sensors (±2g. SeedLink is a part of Seiscomp2.5 and Antelope, which are the software packages used for data acquisition in real time and data exchange. Communication from the digital seismic stations to the NDC in Bucharest and EFOR is assured by five providers (GPRS, VPN, satellite, radio and internet. AntelopeTM 4.11 is used for acquisition and data processing at these two data centers for the reception and processing of the data, which runs on two

  12. Survey on Opportunistic Networks in Delay Tolerant Mobile Sensor Networks

    Directory of Open Access Journals (Sweden)

    Koushik.C.P

    2016-02-01

    Full Text Available Delay Tolerant Network is an emerging research field in Mobile sensor network. It use forwarding technique to transmit the message from source to destination, there is no complete path between sources to destination. Due to mobility of nodes there is frequent change in node paten and difficult to find the path, there is chance that message keep on forwarded inside the network. In this paper we made detail survey on Opportunistic Routing Protocol in mobile network, and in that node getting the message form neighbor node and moving away from Sink. We proposed a technique in Gradient based Routing Protocol to solve node moving away from sink with message.

  13. Heterogeneous LEACH Protocol for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Nishi Sharma

    2013-07-01

    Full Text Available Wireless Sensor Networks are networks of large number of tiny, battery powered sensor nodes having limited on-board storage, processing, and radio capabilities. Nodes sense and send their reports toward a processing center which is called base station. Since this transmission and reception process consumes lots of energy as compare to data processing, Designing protocols and applications for such networks has to be energy aware in order to prolong the lifetime of the network. Generally, real life applications deal with such Heterogeneity rather than Homogeneity. In this paper, a protocol is proposed, which is heterogeneous in energy. We analyze the basic distributed clustering routing protocol LEACH (Low Energy Adaptive Clustering Hierarchy, which is a homogeneous system, and then we study the impact of heterogeneity in energy of nodes to prolong the life time of WSN. Simulation results using MATLAB shows that the proposed Leach-heterogeneous system significantly reduces energy consumption and increase the total lifetime of the wireless sensor network.

  14. A microwave transmission-line network guiding electromagnetic fields through a dense array of metallic objects

    CERN Document Server

    Alitalo, Pekka; Vehmas, Joni; Tretyakov, Sergei

    2008-01-01

    We present measurements of a transmission-line network, designed for cloaking applications in the microwave region. The network is used for channelling microwave energy through an electrically dense array of metal objects, which is basically impenetrable to the impinging electromagnetic radiation. With the designed transmission-line network the waves emitted by a source placed in an air-filled waveguide, are coupled into the network and guided through the array of metallic objects. Our goal is to illustrate the simple manufacturing, assembly, and the general feasibility of these types of cloaking devices.

  15. From sparse to dense and from assortative to disassortative in online social networks

    CERN Document Server

    Li, Menghui; Gong, Xiaofeng; Li, Kun; Wu, Jinshan; Di, Zengru; Lai, Choy-Heng

    2013-01-01

    In this paper, inspired by the analysis on several empirical online social networks, we propose a simple reaction-diffusion-like coevolving model, in which individuals are activated to create links based on their states influenced by local dynamics and their own intension. It is shown that the model can reproduce the remarkable properties observed in empirical online social networks, particularly, that the assortative coefficients are neural or negative and the power law exponents are smaller than 2. Moreover, we demonstrate that, under feasible conditions, the modeling networks naturally convert from assortative to disassortative, and from sparse to dense. Our model is helpful for understanding the formation and evolution of online social networks.

  16. LONG-TERM MONITORING SENSOR NETWORK

    Energy Technology Data Exchange (ETDEWEB)

    Stephen P. Farrington; John W. Haas; Neal Van Wyck

    2003-10-16

    Long-term monitoring (LTM) associated with subsurface contamination sites is a key element of Long Term Stewardship and Legacy Management across the Department of Energy (DOE) complex. However, both within the DOE and elsewhere, LTM is an expensive endeavor, often exceeding the costs of the remediation phase of a clean-up project. The primary contributors to LTM costs are associated with labor. Sample collection, storage, preparation, analysis, and reporting can add a significant financial burden to project expense when extended over many years. Development of unattended, in situ monitoring networks capable of providing quantitative data satisfactory to regulatory concerns has the potential to significantly reduce LTM costs. But survival and dependable operation in a difficult environment is a common obstacle to widespread use across the DOE complex or elsewhere. Deploying almost any sensor in the subsurface for extended periods of time will expose it to chemical and microbial degradation. Over the time-scales required for in situ LTM, even the most advanced sensor systems may be rendered useless. Frequent replacement or servicing (cleaning) of sensors is expensive and labor intensive, offsetting most, if not all, of the cost savings realized with unattended, in situ sensors. To enable facile, remote monitoring of contaminants and other subsurface parameters over prolonged periods, Applied Research Associates, Inc has been working to develop an advanced LTM sensor network consisting of three key elements: (1) an anti-fouling sensor chamber that can accommodate a variety of chemical and physical measurement devices based on electrochemical, optical and other techniques; (2) two rapid, cost effective, and gentle means of emplacing sensor packages either at precise locations directly in the subsurface or in pre-existing monitoring wells; and (3) a web browser-based data acquisition and control system (WebDACS) utilizing field-networked microprocessor-controlled smart

  17. Hack Recognition In Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    B. Srinivasulu

    2014-09-01

    Full Text Available A wireless sensor network can get separated into multiple connected components due to the failure of some of its nodes, which is called a ―cut‖. In this article we consider the problem of detecting cuts by the remaining nodes of a wireless sensor network. We propose an algorithm that allows like every node to detect when the connectivity to a specially designated node has been lost, and one or more nodes (that are connected to the special node after the cut to detect the occurrence of the cut. The algorithm is distributed and asynchronous: every node needs to communicate with only those nodes that are within its communication range. The algorithm is based on the iterative computation of a fictitious ―electrical potential‖ of the nodes. The convergence rate of the underlying iterative scheme is independent of the size and structure of the network.

  18. Prolonging sensor networks lifetime using convex clusters

    Directory of Open Access Journals (Sweden)

    Payam Salehi

    2013-11-01

    Full Text Available Reducing the energy consumption of nodes in sensor networks and prolonging the network life time has been proposed as one of the most important challenges facing researchers in the field of sensor networks. Therefore, designing an energy-aware protocol to gather data from network level and transmitting it to sink is placed on the agenda at this paper. After presenting an analysis of the processes of clustering in sensory networks and investigating the effect of sending interval on the amount of energy consumption, We have shown that if the use of convex static casters be done such as all the communications within the cluster with the sending distance less than the optimal threshold, it Will help to increase the lifetime of nodes. also have shown that if we create a virtual backbone between cluster heads to transfer far cluster heads data from sink to sink , will has a significant impact on increasing the network lifetime. For this reason, a detailed discussion on how to determine the size of clusters and partitioning of the network environment to them is presented in Chapter 4.Simulation results show considerable improvement of the proposed algorithm.

  19. Approach to sensor node calibration for efficient localisation in wireless sensor networks in realistic scenarios

    CSIR Research Space (South Africa)

    Mwila, MK

    2014-06-01

    Full Text Available Conference on Ambient Systems, Networks and Technologies (ANT-2014) Approach to Sensor Node Calibration for Efficient Localisation in Wireless Sensor Networks in Realistic Scenarios Martin K. Mwilaa, Karim Djouanib, Anish Kurienc,∗ a...

  20. A Stochastic Geometry Framework for LOS/NLOS Propagation in Dense Small Cell Networks

    DEFF Research Database (Denmark)

    Galiotto, Carlo; Kiilerich Pratas, Nuno; Marchetti, Nicola

    2015-01-01

    The need to carry out analytical studies of wireless systems often motivates the usage of simplified models which, despite their tractability, can easily lead to an overestimation of the achievable performance. In the case of dense small cells networks, the standard single slope path-loss model h...

  1. Can Full Duplex Boost Throughput and Delay of 5G Ultra-Dense Small Cell Networks?

    DEFF Research Database (Denmark)

    Gatnau, Marta; Berardinelli, Gilberto; Mahmood, Nurul Huda;

    2016-01-01

    Given the recent advances in system and antenna design, practical implementation of full duplex (FD) communication is becoming increasingly feasible. In this paper, the potential of FD in enhancing the performance of 5th generation (5G) ultra-dense small cell networks is investigated. The goal...

  2. Effect of LOS/NLOS Propagation on 5G Ultra-Dense Networks

    DEFF Research Database (Denmark)

    Galiotto, Carlo; Pratas, Nuno; Doyle, Linda

    2017-01-01

    The combined presence of Line-of-Sight (LOS) and Non-Line-of-Sight (NLOS) components in the radio propagation environment can severely degrade the Ultra-Dense Networks (UDNs) performance. Backed by a stochastic geometry model, we show that when the LOS/NLOS propagation components are taken into a...... and to take advantage of extreme cell densification in the upcoming 5G wireless networks....

  3. Supporting IP dense mode multicast routing protocols in WDM all-optical networks

    Science.gov (United States)

    Salvador, Marcos R.; Heemstra de Groot, Sonia; Dey, Diptish

    2000-09-01

    Recent developments in all-optical networking and wavelength division multiplexing technologies allow for the support of optical multicasting, a missing feature towards the optical Internet. In this paper we propose a protocol to construct source-rooted WDM multicast trees. The protocol works under dense mode multicasting routing IP protocols and supports network nodes with different degrees of light splitting, wavelength conversion, and add/drop capabilities.

  4. A Network Coding Based Routing Protocol for Underwater Sensor Networks

    Directory of Open Access Journals (Sweden)

    Xin Guan

    2012-04-01

    Full Text Available Due to the particularities of the underwater environment, some negative factors will seriously interfere with data transmission rates, reliability of data communication, communication range, and network throughput and energy consumption of underwater sensor networks (UWSNs. Thus, full consideration of node energy savings, while maintaining a quick, correct and effective data transmission, extending the network life cycle are essential when routing protocols for underwater sensor networks are studied. In this paper, we have proposed a novel routing algorithm for UWSNs. To increase energy consumption efficiency and extend network lifetime, we propose a time-slot based routing algorithm (TSR.We designed a probability balanced mechanism and applied it to TSR. The theory of network coding is introduced to TSBR to meet the requirement of further reducing node energy consumption and extending network lifetime. Hence, time-slot based balanced network coding (TSBNC comes into being. We evaluated the proposed time-slot based balancing routing algorithm and compared it with other classical underwater routing protocols. The simulation results show that the proposed protocol can reduce the probability of node conflicts, shorten the process of routing construction, balance energy consumption of each node and effectively prolong the network lifetime.

  5. Comparative Analysis of Data Aggregation Algorithms Under Various Architectural Models in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Anitha C L

    2014-10-01

    Full Text Available Wireless sensor network has emerged as a promising technique that revolutionary the way of sensing information. Dense deployed sensor nodes in a specific region are likely to transfer redundant data to the base station. This increases the communication overhead and affects network lifetime. Since energy conservation is the key issue in wireless sensor network, data aggregation should be incorporated in order to save energy. The main aim of data aggregation technique is to collect and aggregate data in an energy efficient manner so that network lifetime is enhanced. In this paper, authors present state of the research by summarizing the work on data aggregation algorithms that has already been published and by highlighting the performance characteristics that are being addressed. The performance comparison of clustered based data aggregation, chain based data aggregation, tree based data aggregation and grid based data aggregation algorithms have been analyzed using NS-2 for various parameters.

  6. Coalescence for Mobile Sensor Networks

    OpenAIRE

    Poduri, Sameera; Sukhatme, Gaurav S.

    2007-01-01

    Coalescence is the problem of isolated mobile robots independently searching for peers with the goal of forming a single connected network. This paper analyzes coalescence time for a worst-case scenario where the robots do not have any knowledge about the environment or positions of other robots and perform independent, memory less search. Using the random direction mobility model, we show that coalescence time has an exponential distribution which is a function of the number of robots, speed...

  7. Tracking Objects with Networked Scattered Directional Sensors

    Directory of Open Access Journals (Sweden)

    P. R. Kumar

    2007-12-01

    Full Text Available We study the problem of object tracking using highly directional sensors—sensors whose field of vision is a line or a line segment. A network of such sensors monitors a certain region of the plane. Sporadically, objects moving in straight lines and at a constant speed cross the region. A sensor detects an object when it crosses its line of sight, and records the time of the detection. No distance or angle measurements are available. The task of the sensors is to estimate the directions and speeds of the objects, and the sensor lines, which are unknown a priori. This estimation problem involves the minimization of a highly nonconvex cost function. To overcome this difficulty, we introduce an algorithm, which we call “adaptive basis algorithm.” This algorithm is divided into three phases: in the first phase, the algorithm is initialized using data from six sensors and four objects; in the second phase, the estimates are updated as data from more sensors and objects are incorporated. The third phase is an optional coordinated transformation. The estimation is done in an “ad-hoc” coordinate system, which we call “adaptive coordinate system.” When more information is available, for example, the location of six sensors, the estimates can be transformed to the “real-world” coordinate system. This constitutes the third phase.

  8. Optimal Energy Aware Clustering in Sensor Networks

    Directory of Open Access Journals (Sweden)

    Majid Sarrafzadeh

    2002-07-01

    Full Text Available Sensor networks is among the fastest growing technologies that have the potential of changing our lives drastically. These collaborative, dynamic and distributed computing and communicating systems will be self organizing. They will have capabilities of distributing a task among themselves for efficient computation. There are many challenges in implementation of such systems: energy dissipation and clustering being one of them. In order to maintain a certain degree of service quality and a reasonable system lifetime, energy needs to be optimized at every stage of system operation. Sensor node clustering is another very important optimization problem. Nodes that are clustered together will easily be able to communicate with each other. Considering energy as an optimization parameter while clustering is imperative. In this paper we study the theoretical aspects of the clustering problem in sensor networks with application to energy optimization. We illustrate an optimal algorithm for clustering the sensor nodes such that each cluster (which has a master is balanced and the total distance between sensor nodes and master nodes is minimized. Balancing the clusters is needed for evenly distributing the load on all master nodes. Minimizing the total distance helps in reducing the communication overhead and hence the energy dissipation. This problem (which we call balanced k-clustering is modeled as a mincost flow problem which can be solved optimally using existing techniques.

  9. Track classification within wireless sensor network

    Science.gov (United States)

    Doumerc, Robin; Pannetier, Benjamin; Moras, Julien; Dezert, Jean; Canevet, Loic

    2017-05-01

    In this paper, we present our study on track classification by taking into account environmental information and target estimated states. The tracker uses several motion model adapted to different target dynamics (pedestrian, ground vehicle and SUAV, i.e. small unmanned aerial vehicle) and works in centralized architecture. The main idea is to explore both: classification given by heterogeneous sensors and classification obtained with our fusion module. The fusion module, presented in his paper, provides a class on each track according to track location, velocity and associated uncertainty. To model the likelihood on each class, a fuzzy approach is used considering constraints on target capability to move in the environment. Then the evidential reasoning approach based on Dempster-Shafer Theory (DST) is used to perform a time integration of this classifier output. The fusion rules are tested and compared on real data obtained with our wireless sensor network.In order to handle realistic ground target tracking scenarios, we use an autonomous smart computer deposited in the surveillance area. After the calibration step of the heterogeneous sensor network, our system is able to handle real data from a wireless ground sensor network. The performance of this system is evaluated in a real exercise for intelligence operation ("hunter hunt" scenario).

  10. Dynamic Localization Schemes in Malicious Sensor Networks

    Directory of Open Access Journals (Sweden)

    Kaiqi Xiong

    2009-10-01

    Full Text Available Wireless sensor networks (WSN have recently shown many potential military and civilian applications, especially those used in hostile environments where malicious adversaries can be present. The accuracy of location information is critical for such applications. It is impractical to have a GPS device on each sensor in WSN due to costs. Most of the existing location discovery schemes can only be used in the trusted environment. Recent research has addressed security issues in sensor network localization, but to the best of our knowledge, none have completely solved the secure localization problem. In this paper, we propose novel schemes for secure dynamic localization in sensor networks. These proposed schemes can tolerate up to 50% of beacon nodes being malicious, and they have linear computation time with respect to the number of reference nodes. Our security analysis has showed that our schemes are applicable and resilient to attacks from adversaries. We have further conducted simulations to analyze and compare the performance of these schemes, and to indicate when each should be used. The efficiencies of each method shows why we needed to propose multiple methods.

  11. Wireless sensor networks principles, design and applications

    CERN Document Server

    Yang, Shuang-Hua

    2014-01-01

    Wireless Sensor Networks presents the latest practical solutions to the design issues presented in wireless-sensor-network-based systems. Novel features of the text, distributed throughout, include workable solutions, demonstration systems and case studies of the design and application of wireless sensor networks (WSNs) based on the first-hand research and development experience of the author, and the chapters on real applications: building fire safety protection; smart home automation; and logistics resource management. Case studies and applications illustrate the practical perspectives of: ·         sensor node design; ·         embedded software design; ·         routing algorithms; ·         sink node positioning; ·         co-existence with other wireless systems; ·         data fusion; ·         security; ·         indoor location tracking; ·         integrating with radio-frequency identification; and ·         In...

  12. Dense Local Seismic Network at Villarrica Volcano (Southern Chile)

    Science.gov (United States)

    Mora-Stock, C.; Thorwart, M.; Dzieran, L.; Rabbel, W.

    2013-12-01

    Villarrica volcano is one of the most active volcanoes in the Southern Andes. It has been presenting constant fumarole activity and seismicity since its last eruption in 1984-85. A local network was installed at Villarrica volcano (Southern Chile) during the first two weeks of March, 2012. In total, 75 DSS-Cube short-period stations (30 3-Component, 45 1-Component) were deployed at and around the volcano area, covering approx. 63 km x 55 km. The average station spacing is 1.5 km for stations inside the perimeter of the volcanic edifice, and 5km outside this perimeter. The network recorded ca. 94 volcano tectonic (VT) events located SSW, SSE and North of the crater, with clear P- and S-wave arrivals. Many others, ca.73 events, could be classified as 'hybrid' events (HB), which present high frequencies at the beginning of the signal, and a sharp and notorious S-wave at the crater stations, but a strong scattering, lower frequency content, and elongated coda on the stations along the volcanic edifice. This strong scattering effect is probably caused by the heterogeneous ash layers on the edifice structure. Few long period events (LP), with main frequencies between 2-4 Hz, were observed. From the tectonic regional events, three sets of events can be distinguished. One coming from the southern end of the focal plane of the Maule earthquake (2010), with S-P wave travel time difference of ca. 30 s or more. Another closer group with S-P wave travel time difference between 10 s and 20 s, and the last group with S-P wave travel time difference of 10 s or less. A cross-correlation analysis to the travel times of the regional events and a teleseismic event from Argentina was applied in order to determine the average velocity structure of the volcano, and obtained an average P-wave velocity of 3.6 km/s for the volcanic edifice inside a radius of 6.5 km, and 4.1 km/s for the surrounding area outside this radius. This model serves as a starting point for local earthquake

  13. An Isolation Intrusion Detection System for Hierarchical Wireless Sensor Networks

    OpenAIRE

    Rung-Ching Chen; Chia-Fen Hsieh; Yung-Fa Huang

    2010-01-01

    A wireless sensor network (WSN) is a wireless network consisting of spatially distributed autonomous devices using sensors to cooperatively monitor environmental conditions, such as battlefield data and personal health information, and some environment limited resources. To avoid malicious damage is important while information is transmitted in wireless network. Thus, Wireless Intrusion Detection Systems are crucial to safe operation in wireless sensor networks. Wireless networks are subject ...

  14. Modeling virtualized downlink cellular networks with ultra-dense small cells

    KAUST Repository

    Ibrahim, Hazem

    2015-09-11

    The unrelenting increase in the mobile users\\' populations and traffic demand drive cellular network operators to densify their infrastructure. Network densification increases the spatial frequency reuse efficiency while maintaining the signal-to-interference-plus-noise-ratio (SINR) performance, hence, increases the spatial spectral efficiency and improves the overall network performance. However, control signaling in such dense networks consumes considerable bandwidth and limits the densification gain. Radio access network (RAN) virtualization via control plane (C-plane) and user plane (U-plane) splitting has been recently proposed to lighten the control signaling burden and improve the network throughput. In this paper, we present a tractable analytical model for virtualized downlink cellular networks, using tools from stochastic geometry. We then apply the developed modeling framework to obtain design insights for virtualized RANs and quantify associated performance improvement. © 2015 IEEE.

  15. Module discovery by exhaustive search for densely connected, co-expressed regions in biomolecular interaction networks.

    Science.gov (United States)

    Colak, Recep; Moser, Flavia; Chu, Jeffrey Shih-Chieh; Schönhuth, Alexander; Chen, Nansheng; Ester, Martin

    2010-10-25

    Computational prediction of functionally related groups of genes (functional modules) from large-scale data is an important issue in computational biology. Gene expression experiments and interaction networks are well studied large-scale data sources, available for many not yet exhaustively annotated organisms. It has been well established, when analyzing these two data sources jointly, modules are often reflected by highly interconnected (dense) regions in the interaction networks whose participating genes are co-expressed. However, the tractability of the problem had remained unclear and methods by which to exhaustively search for such constellations had not been presented. We provide an algorithmic framework, referred to as Densely Connected Biclustering (DECOB), by which the aforementioned search problem becomes tractable. To benchmark the predictive power inherent to the approach, we computed all co-expressed, dense regions in physical protein and genetic interaction networks from human and yeast. An automatized filtering procedure reduces our output which results in smaller collections of modules, comparable to state-of-the-art approaches. Our results performed favorably in a fair benchmarking competition which adheres to standard criteria. We demonstrate the usefulness of an exhaustive module search, by using the unreduced output to more quickly perform GO term related function prediction tasks. We point out the advantages of our exhaustive output by predicting functional relationships using two examples. We demonstrate that the computation of all densely connected and co-expressed regions in interaction networks is an approach to module discovery of considerable value. Beyond confirming the well settled hypothesis that such co-expressed, densely connected interaction network regions reflect functional modules, we open up novel computational ways to comprehensively analyze the modular organization of an organism based on prevalent and largely available large

  16. Module discovery by exhaustive search for densely connected, co-expressed regions in biomolecular interaction networks.

    Directory of Open Access Journals (Sweden)

    Recep Colak

    Full Text Available BACKGROUND: Computational prediction of functionally related groups of genes (functional modules from large-scale data is an important issue in computational biology. Gene expression experiments and interaction networks are well studied large-scale data sources, available for many not yet exhaustively annotated organisms. It has been well established, when analyzing these two data sources jointly, modules are often reflected by highly interconnected (dense regions in the interaction networks whose participating genes are co-expressed. However, the tractability of the problem had remained unclear and methods by which to exhaustively search for such constellations had not been presented. METHODOLOGY/PRINCIPAL FINDINGS: We provide an algorithmic framework, referred to as Densely Connected Biclustering (DECOB, by which the aforementioned search problem becomes tractable. To benchmark the predictive power inherent to the approach, we computed all co-expressed, dense regions in physical protein and genetic interaction networks from human and yeast. An automatized filtering procedure reduces our output which results in smaller collections of modules, comparable to state-of-the-art approaches. Our results performed favorably in a fair benchmarking competition which adheres to standard criteria. We demonstrate the usefulness of an exhaustive module search, by using the unreduced output to more quickly perform GO term related function prediction tasks. We point out the advantages of our exhaustive output by predicting functional relationships using two examples. CONCLUSION/SIGNIFICANCE: We demonstrate that the computation of all densely connected and co-expressed regions in interaction networks is an approach to module discovery of considerable value. Beyond confirming the well settled hypothesis that such co-expressed, densely connected interaction network regions reflect functional modules, we open up novel computational ways to comprehensively analyze

  17. Wireless sensor networks and ecological monitoring

    CERN Document Server

    Jiang, Joe-Air

    2013-01-01

    This book presents the state of the art technologies and solutions to tackle the critical challenges faced by the building and development of the WSN and ecological monitoring system but also potential impact on society at social, medical and technological level. This book is dedicated to Sensing systems for Sensors, Wireless Sensor Networks and Ecological Monitoring. The book aims at Master and PhD degree students, researchers, practitioners, especially WSN engineers involved with ecological monitoring. The book will provide an opportunity of a dedicated and a deep approach in order to improve their knowledge in this specific field.  

  18. Mobile cluster rekeying in tracking sensor network

    Institute of Scientific and Technical Information of China (English)

    WANG Jia-hao; QING Zhi-guang; GENG Ji; LI Zhi-jun

    2006-01-01

    The wireless sensor network has a broad application in target tracking and locating, and is especially fit for military detection or guard. By arranging the sensor nodes around the target, this article establishes a tracking cluster which can follow the target logically, process data on the target and report to the sink node,thus achieving the tracking function. To improve the security, this article proposes a mobile cluster rekeying protocol (MCRP) to manage the tracking cluster's season key. It is based on a random key predistribution algorithm (RKP), which is composed of a multi-path reinforcement scheme, a q-composition scheme and a oneway cryptographic hash function.

  19. Energy Efficient MAC for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Pekka KOSKELA

    2010-10-01

    Full Text Available This paper considers an overlay solution for asynchronous Medium Access Control (MAC protocols in a duty-cycled wireless sensor network (WSN. The solution extends sleeping times and corrects time drift when the sampling rate is low. The sleeping time is adjusted according to the requisite data sampling rate and the delay requirements of the prevailing application. This and the time drift correction considerably reduced idle listening and thus also decreased power consumption. When the power consumption is reduced, the life of wireless sensor nodes extends.

  20. Multiband array detection and location of seismic sources recorded by dense seismic networks

    Science.gov (United States)

    Poiata, Natalia; Satriano, Claudio; Vilotte, Jean-Pierre; Bernard, Pascal; Obara, Kazushige

    2016-06-01

    We present a new methodology for detection and space-time location of seismic sources based on multiscale, frequency-selective coherence of the wave field recorded by dense large-scale seismic networks and local antennas. The method is designed to enhance coherence of the signal statistical features across the array of sensors and consists of three steps: signal processing, space-time imaging, and detection and location. The first step provides, for each station, a simplified representation of seismic signal by extracting multiscale non-stationary statistical characteristics, through multiband higher-order statistics or envelopes. This signal processing scheme is designed to account for a priori unknown transients, potentially associated with a variety of sources (e.g. earthquakes, tremors), and to prepare data for a better performance in posterior steps. Following space-time imaging is carried through 3-D spatial mapping and summation of station-pair time-delay estimate functions. This step produces time-series of 3-D spatial images representing the likelihood that each pixel makes part of a source. Detection and location is performed in the final step by extracting the local maxima from the 3-D spatial images. We demonstrate the efficiency of the method in detecting and locating seismic sources associated with low signal-to-noise ratio on an example of the aftershock earthquake records from local stations of International Maule Aftershock Deployment in Central Chile. The performance and potential of the method to detect, locate and characterize the energy release associated with possibly mixed seismic radiation from earthquakes and low-frequency tectonic tremors is further tested on continuous data from southwestern Japan.

  1. Key Management in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Ismail Mansour

    2015-09-01

    Full Text Available Wireless sensor networks are a challenging field of research when it comes to security issues. Using low cost sensor nodes with limited resources makes it difficult for cryptographic algorithms to function without impacting energy consumption and latency. In this paper, we focus on key management issues in multi-hop wireless sensor networks. These networks are easy to attack due to the open nature of the wireless medium. Intruders could try to penetrate the network, capture nodes or take control over particular nodes. In this context, it is important to revoke and renew keys that might be learned by malicious nodes. We propose several secure protocols for key revocation and key renewal based on symmetric encryption and elliptic curve cryptography. All protocols are secure, but have different security levels. Each proposed protocol is formally proven and analyzed using Scyther, an automatic verification tool for cryptographic protocols. For efficiency comparison sake, we implemented all protocols on real testbeds using TelosB motes and discussed their performances.

  2. Gas Main Sensor and Communications Network System

    Energy Technology Data Exchange (ETDEWEB)

    Hagen Schempf

    2006-05-31

    Automatika, Inc. was contracted by the Department of Energy (DOE) and with co-funding from the Northeast Gas Association (NGA), to develop an in-pipe natural gas prototype measurement and wireless communications system for assessing and monitoring distribution networks. This projected was completed in April 2006, and culminated in the installation of more than 2 dozen GasNet nodes in both low- and high-pressure cast-iron and steel mains owned by multiple utilities in the northeastern US. Utilities are currently logging data (off-line) and monitoring data in real time from single and multiple networked sensors over cellular networks and collecting data using wireless bluetooth PDA systems. The system was designed to be modular, using in-pipe sensor-wands capable of measuring, flow, pressure, temperature, water-content and vibration. Internal antennae allowed for the use of the pipe-internals as a waveguide for setting up a sensor network to collect data from multiple nodes simultaneously. Sensor nodes were designed to be installed with low- and no-blow techniques and tools. Using a multi-drop bus technique with a custom protocol, all electronics were designed to be buriable and allow for on-board data-collection (SD-card), wireless relaying and cellular network forwarding. Installation options afforded by the design included direct-burial and external polemounted variants. Power was provided by one or more batteries, direct AC-power (Class I Div.2) and solar-array. The utilities are currently in a data-collection phase and intend to use the collected (and processed) data to make capital improvement decisions, compare it to Stoner model predictions and evaluate the use of such a system for future expansion, technology-improvement and commercialization starting later in 2006.

  3. Survey of Security Technologies on Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Qiuwei Yang

    2015-01-01

    Full Text Available Because of their low cost and adaptability, wireless sensor networks are widely used in civil, military, and commercial fields and other fields. However, since the sensor node in the calculation of the capacity, battery capacity, and storage capacity are restricted by the limitations and inherent characteristics of the sensor networks, compared to traditional networks, which makes wireless sensor networks face more security threats. This paper summarized research progress of sensor network security issues as three aspects, key management, authentication, and secure routing, analyzed and commented on these results advantages and disadvantages and pointed out the future direction of the hot research field.

  4. A survey on routing in wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    XIAO Renyi; WU Guozheng

    2007-01-01

    One of the most important issues in wireless sensor networks is data delivery service between sensors and the data collection unit (called sink ). Although sensor networks and mobile ad hoc networks are similar to some extent, they are radically distinct in many aspects. Sensor networks have many unique features, making them more challenging and need further research efforts. The existing routing protocols for sensor networks can be classified as indicator-based and indicator-free. In this survey, we make a comparative study of these protocols. Open issues and research directions are pointed out as guidelines for our future work.

  5. Analysis of k-Coverage in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Rasmi Ranjan Patra

    2011-09-01

    Full Text Available Recently, a concept of wireless sensor networks has attracted much attention due to its wide-range of potential applications. Wireless sensor networks also pose a number of challenging optimization problems. One of the fundamental problems in sensor networks is the coverage problem, which reflects the quality of service that can be provided by a particular sensor network. The coverage concept is depending from several points of view due to a variety of sensors and a wide-range of their applications. One fundamental issue in sensor networks is the coverage problem, which reflects how well a sensor network is monitored or tracked by sensors. In this paper, we formulate this problem as a decision problem, whose goal is to determine the degree of coverage of a sensor network, which is covered by at least k sensors, where k is a predefined value. The sensing ranges of sensors can be same or different. Performance evaluation of our protocol indicates that degree of coverage of wireless sensor networks can be determined within small period of time. Therefore energy consumption of the sensor networks can be minimized.

  6. Quality of Service Enhancement of Wireless Sensor Network Using Symmetric Key Cryptographic Schemes

    Directory of Open Access Journals (Sweden)

    Er. Gurjot Singh

    2014-07-01

    Full Text Available A Wireless Sensor Network is a combination of spatially distributed independent nodes deployed in dense environment, communicating wirelessly over limited bandwidth and frequency. Security and Qos is the major concern in wireless sensor network due to its wireless communication nature and constraints like low computation capability, less memory, bounded energy resources, susceptibility to physical capture or damages and the use of insecure wireless communication channels. These constraints make security along with the QoS, a challenge in wireless sensor network. The cryptographic schemes increases the level of security and make it secure against critical attacks but also has a significant impact on the QoS of wireless sensor network. In this paper, the different cryptographic schemes based on asymmetric key and symmetric key cryptography are evaluated. The symmetric key cryptography schemes require less time for processing, less power and also require less storage space as compared to asymmetric key cryptographic schemes, results in less impact on the QoS of wireless sensor network. In this paper, the QoS of wireless sensor network along with cryptographic schemes will be evaluated on the basis of metrics like throughput, jitter, end-to-end delay, total packet received and energy consumption.

  7. Distributed query processing in flash-based sensor networks

    Institute of Scientific and Technical Information of China (English)

    Jianliang XU; Xueyan TANG; Wang-Chien LEE

    2008-01-01

    Wireless sensor networks are used in a large array of applications to capture,collect,and analyze physical environmental data.Many existing sensor systems instruct sensor nodes to report their measurements to central repositories outside the network,which is expensive in energy cost.Recent technological advances in flash memory have given rise to the development of storagecentric sensor networks,where sensor nodes are equipped with high-capacity flash memory storage such that sensor data can b.e stored and managed inside the network to reduce expensive communication.This novel architecture calls for new data management techniques to fully exploit distributed in-network data storage.This paper describes some of our research on distributed query processing in such flash-based sensor networks.Of particular interests are the issues that arise in the design of storage management and indexing structures combining sensor system workload and read/write/erase characteristics of flash memory.

  8. Distributed coding/decoding complexity in video sensor networks.

    Science.gov (United States)

    Cordeiro, Paulo J; Assunção, Pedro

    2012-01-01

    Video Sensor Networks (VSNs) are recent communication infrastructures used to capture and transmit dense visual information from an application context. In such large scale environments which include video coding, transmission and display/storage, there are several open problems to overcome in practical implementations. This paper addresses the most relevant challenges posed by VSNs, namely stringent bandwidth usage and processing time/power constraints. In particular, the paper proposes a novel VSN architecture where large sets of visual sensors with embedded processors are used for compression and transmission of coded streams to gateways, which in turn transrate the incoming streams and adapt them to the variable complexity requirements of both the sensor encoders and end-user decoder terminals. Such gateways provide real-time transcoding functionalities for bandwidth adaptation and coding/decoding complexity distribution by transferring the most complex video encoding/decoding tasks to the transcoding gateway at the expense of a limited increase in bit rate. Then, a method to reduce the decoding complexity, suitable for system-on-chip implementation, is proposed to operate at the transcoding gateway whenever decoders with constrained resources are targeted. The results show that the proposed method achieves good performance and its inclusion into the VSN infrastructure provides an additional level of complexity control functionality.

  9. Cooperative Game-Based Energy Efficiency Management over Ultra-Dense Wireless Cellular Networks

    Directory of Open Access Journals (Sweden)

    Ming Li

    2016-09-01

    Full Text Available Ultra-dense wireless cellular networks have been envisioned as a promising technique for handling the explosive increase of wireless traffic volume. With the extensive deployment of small cells in wireless cellular networks, the network spectral efficiency (SE is improved with the use of limited frequency. However, the mutual inter-tier and intra-tier interference between or among small cells and macro cells becomes serious. On the other hand, more chances for potential cooperation among different cells are introduced. Energy efficiency (EE has become one of the most important problems for future wireless networks. This paper proposes a cooperative bargaining game-based method for comprehensive EE management in an ultra-dense wireless cellular network, which highlights the complicated interference influence on energy-saving challenges and the power-coordination process among small cells and macro cells. Especially, a unified EE utility with the consideration of the interference mitigation is proposed to jointly address the SE, the deployment efficiency (DE, and the EE. In particular, closed-form power-coordination solutions for the optimal EE are derived to show the convergence property of the algorithm. Moreover, a simplified algorithm is presented to reduce the complexity of the signaling overhead, which is significant for ultra-dense small cells. Finally, numerical simulations are provided to illustrate the efficiency of the proposed cooperative bargaining game-based and simplified schemes.

  10. MorphoNeuroNet: an automated method for dense neurite network analysis.

    Science.gov (United States)

    Pani, Giuseppe; De Vos, Winnok H; Samari, Nada; de Saint-Georges, Louis; Baatout, Sarah; Van Oostveldt, Patrick; Benotmane, Mohammed Abderrafi

    2014-02-01

    High content cell-based screens are rapidly gaining popularity in the context of neuronal regeneration studies. To analyze neuronal morphology, automatic image analysis pipelines have been conceived, which accurately quantify the shape changes of neurons in cell cultures with non-dense neurite networks. However, most existing methods show poor performance for well-connected and differentiated neuronal networks, which may serve as valuable models for inter alia synaptogenesis. Here, we present a fully automated method for quantifying the morphology of neurons and the density of neurite networks, in dense neuronal cultures, which are grown for more than 10 days. MorphoNeuroNet, written as a script for ImageJ, Java based freeware, automatically determines various morphological parameters of the soma and the neurites (size, shape, starting points, and fractional occupation). The image analysis pipeline consists of a multi-tier approach in which the somas are segmented by adaptive region growing using nuclei as seeds, and the neurites are delineated by a combination of various intensity and edge detection algorithms. Quantitative comparison showed a superior performance of MorphoNeuroNet to existing analysis tools, especially for revealing subtle changes in thin neurites, which have weak fluorescence intensity compared to the rest of the network. The proposed method will help determining the effects of compounds on cultures with dense neurite networks, thereby boosting physiological relevance of cell-based assays in the context of neuronal diseases. © 2013 International Society for Advancement of Cytometry.

  11. Cooperative Game-Based Energy Efficiency Management over Ultra-Dense Wireless Cellular Networks.

    Science.gov (United States)

    Li, Ming; Chen, Pengpeng; Gao, Shouwan

    2016-09-13

    Ultra-dense wireless cellular networks have been envisioned as a promising technique for handling the explosive increase of wireless traffic volume. With the extensive deployment of small cells in wireless cellular networks, the network spectral efficiency (SE) is improved with the use of limited frequency. However, the mutual inter-tier and intra-tier interference between or among small cells and macro cells becomes serious. On the other hand, more chances for potential cooperation among different cells are introduced. Energy efficiency (EE) has become one of the most important problems for future wireless networks. This paper proposes a cooperative bargaining game-based method for comprehensive EE management in an ultra-dense wireless cellular network, which highlights the complicated interference influence on energy-saving challenges and the power-coordination process among small cells and macro cells. Especially, a unified EE utility with the consideration of the interference mitigation is proposed to jointly address the SE, the deployment efficiency (DE), and the EE. In particular, closed-form power-coordination solutions for the optimal EE are derived to show the convergence property of the algorithm. Moreover, a simplified algorithm is presented to reduce the complexity of the signaling overhead, which is significant for ultra-dense small cells. Finally, numerical simulations are provided to illustrate the efficiency of the proposed cooperative bargaining game-based and simplified schemes.

  12. Cooperative Game-Based Energy Efficiency Management over Ultra-Dense Wireless Cellular Networks

    Science.gov (United States)

    Li, Ming; Chen, Pengpeng; Gao, Shouwan

    2016-01-01

    Ultra-dense wireless cellular networks have been envisioned as a promising technique for handling the explosive increase of wireless traffic volume. With the extensive deployment of small cells in wireless cellular networks, the network spectral efficiency (SE) is improved with the use of limited frequency. However, the mutual inter-tier and intra-tier interference between or among small cells and macro cells becomes serious. On the other hand, more chances for potential cooperation among different cells are introduced. Energy efficiency (EE) has become one of the most important problems for future wireless networks. This paper proposes a cooperative bargaining game-based method for comprehensive EE management in an ultra-dense wireless cellular network, which highlights the complicated interference influence on energy-saving challenges and the power-coordination process among small cells and macro cells. Especially, a unified EE utility with the consideration of the interference mitigation is proposed to jointly address the SE, the deployment efficiency (DE), and the EE. In particular, closed-form power-coordination solutions for the optimal EE are derived to show the convergence property of the algorithm. Moreover, a simplified algorithm is presented to reduce the complexity of the signaling overhead, which is significant for ultra-dense small cells. Finally, numerical simulations are provided to illustrate the efficiency of the proposed cooperative bargaining game-based and simplified schemes. PMID:27649170

  13. Dense range map reconstruction from a versatile robotic sensor system with an active trinocular vision and a passive binocular vision.

    Science.gov (United States)

    Kim, Min Young; Lee, Hyunkee; Cho, Hyungsuck

    2008-04-10

    One major research issue associated with 3D perception by robotic systems is the creation of efficient sensor systems that can generate dense range maps reliably. A visual sensor system for robotic applications is developed that is inherently equipped with two types of sensor, an active trinocular vision and a passive stereo vision. Unlike in conventional active vision systems that use a large number of images with variations of projected patterns for dense range map acquisition or from conventional passive vision systems that work well on specific environments with sufficient feature information, a cooperative bidirectional sensor fusion method for this visual sensor system enables us to acquire a reliable dense range map using active and passive information simultaneously. The fusion algorithms are composed of two parts, one in which the passive stereo vision helps active vision and the other in which the active trinocular vision helps the passive one. The first part matches the laser patterns in stereo laser images with the help of intensity images; the second part utilizes an information fusion technique using the dynamic programming method in which image regions between laser patterns are matched pixel-by-pixel with help of the fusion results obtained in the first part. To determine how the proposed sensor system and fusion algorithms can work in real applications, the sensor system is implemented on a robotic system, and the proposed algorithms are applied. A series of experimental tests is performed for a variety of configurations of robot and environments. The performance of the sensor system is discussed in detail.

  14. Intrusion Detection in Wireless Body Sensor Networks

    Directory of Open Access Journals (Sweden)

    Nadya El MOUSSAID

    2017-01-01

    Full Text Available The recent advances in electronic and robotics industry have enabled the manufacturing of sensors capable of measuring a set of application-oriented parameters and transmit them back to the base station for analysis purposes. These sensors are widely used in many applications including the healthcare systems forming though a Wireless Body Sensor Networks. The medical data must be highly secured and possible intrusion has to be fully detected to proceed with the prevention phase. In this paper, we propose a new intrusion superframe schema for 802.15.6 standard to detect the cloning attack. The results proved the efficiency of our technique in detecting this type of attack based on 802.15.6 parameters performances coupled with frequency switching at the radio model.

  15. Tritium-powered radiation sensor network

    Science.gov (United States)

    Litz, Marc S.; Russo, Johnny A.; Katsis, Dimos

    2016-05-01

    Isotope power supplies offer long-lived (100 years using 63Ni), low-power energy sources, enabling sensors or communications nodes for the lifetime of infrastructure. A tritium beta-source (12.5-year half-life) encapsulated in a phosphor-lined vial couples directly to a photovoltaic (PV) to generate a trickle current into an electrical load. An inexpensive design is described using commercial-of-the-shelf (COTS) components that generate 100 μWe for nextgeneration compact electronics/sensors. A matched radiation sensor has been built for long-duration missions utilizing microprocessor-controlled sleep modes, low-power electronic components, and a passive interrupt driven environmental wake-up. The low-power early-warning radiation detector network and isotope power source enables no-maintenance mission lifetimes.

  16. Lifetime of Sensor Network by Exploiting Heterogeneity- A Survey

    Directory of Open Access Journals (Sweden)

    Ritesh Kumar Singh

    2014-07-01

    Full Text Available Wireless sensor networks (WSN are emerging in various fields. A large number of sensors in these applications are unattended and work autonomously. Lifetime is an important parameter which is critical for different algorithms for data transfer. Moreover it is responsible for the throughput and the failure of the network. Heterogeneous wireless sensor network, on top of clustering technique, has evolved as the major parameter to increase the lifetime of the Sensor network, data transfer, energy consumption and the scalability of the sensor network. This paper surveys the different clustering algorithm and dependencies for heterogeneous wireless sensor network. This paper is for scholars to gain sufficient knowledge of wireless sensor network (WSN, its important characteristics, and performance metrics with factors responsible for a WSN system. It can help a scholar to start a quick research by understanding all the respective parameters and energy oriented strategies in WSN.

  17. Wireless Sensor Network Handles Image Data

    Science.gov (United States)

    2008-01-01

    To relay data from remote locations for NASA s Earth sciences research, Goddard Space Flight Center contributed to the development of "microservers" (wireless sensor network nodes), which are now used commercially as a quick and affordable means to capture and distribute geographical information, including rich sets of aerial and street-level imagery. NASA began this work out of a necessity for real-time recovery of remote sensor data. These microservers work much like a wireless office network, relaying information between devices. The key difference, however, is that instead of linking workstations within one office, the interconnected microservers operate miles away from one another. This attribute traces back to the technology s original use: The microservers were originally designed for seismology on remote glaciers and ice streams in Alaska, Greenland, and Antarctica-acquiring, storing, and relaying data wirelessly between ground sensors. The microservers boast three key attributes. First, a researcher in the field can establish a "managed network" of microservers and rapidly see the data streams (recovered wirelessly) on a field computer. This rapid feedback permits the researcher to reconfigure the network for different purposes over the course of a field campaign. Second, through careful power management, the microservers can dwell unsupervised in the field for up to 2 years, collecting tremendous amounts of data at a research location. The third attribute is the exciting potential to deploy a microserver network that works in synchrony with robotic explorers (e.g., providing ground truth validation for satellites, supporting rovers as they traverse the local environment). Managed networks of remote microservers that relay data unsupervised for up to 2 years can drastically reduce the costs of field instrumentation and data rec

  18. An energy efficient clustering routing algorithm for wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    LI Li; DONG Shu-song; WEN Xiang-ming

    2006-01-01

    This article proposes an energy efficient clustering routing (EECR) algorithm for wireless sensor network. The algorithm can divide a sensor network into a few clusters and select a cluster head base on weight value that leads to more uniform energy dissipation evenly among all sensor nodes.Simulations and results show that the algorithm can save overall energy consumption and extend the lifetime of the wireless sensor network.

  19. Networked Computing in Wireless Sensor Networks for Structural Health Monitoring

    CERN Document Server

    Jindal, Apoorva

    2010-01-01

    This paper studies the problem of distributed computation over a network of wireless sensors. While this problem applies to many emerging applications, to keep our discussion concrete we will focus on sensor networks used for structural health monitoring. Within this context, the heaviest computation is to determine the singular value decomposition (SVD) to extract mode shapes (eigenvectors) of a structure. Compared to collecting raw vibration data and performing SVD at a central location, computing SVD within the network can result in significantly lower energy consumption and delay. Using recent results on decomposing SVD, a well-known centralized operation, into components, we seek to determine a near-optimal communication structure that enables the distribution of this computation and the reassembly of the final results, with the objective of minimizing energy consumption subject to a computational delay constraint. We show that this reduces to a generalized clustering problem; a cluster forms a unit on w...

  20. Achieving network level privacy in Wireless Sensor Networks.

    Science.gov (United States)

    Shaikh, Riaz Ahmed; Jameel, Hassan; d'Auriol, Brian J; Lee, Heejo; Lee, Sungyoung; Song, Young-Jae

    2010-01-01

    Full network level privacy has often been categorized into four sub-categories: Identity, Route, Location and Data privacy. Achieving full network level privacy is a critical and challenging problem due to the constraints imposed by the sensor nodes (e.g., energy, memory and computation power), sensor networks (e.g., mobility and topology) and QoS issues (e.g., packet reach-ability and timeliness). In this paper, we proposed two new identity, route and location privacy algorithms and data privacy mechanism that addresses this problem. The proposed solutions provide additional trustworthiness and reliability at modest cost of memory and energy. Also, we proved that our proposed solutions provide protection against various privacy disclosure attacks, such as eavesdropping and hop-by-hop trace back attacks.

  1. Achieving Network Level Privacy in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sungyoung Lee

    2010-02-01

    Full Text Available Full network level privacy has often been categorized into four sub-categories: Identity, Route, Location and Data privacy. Achieving full network level privacy is a critical and challenging problem due to the constraints imposed by the sensor nodes (e.g., energy, memory and computation power, sensor networks (e.g., mobility and topology and QoS issues (e.g., packet reach-ability and timeliness. In this paper, we proposed two new identity, route and location privacy algorithms and data privacy mechanism that addresses this problem. The proposed solutions provide additional trustworthiness and reliability at modest cost of memory and energy. Also, we proved that our proposed solutions provide protection against various privacy disclosure attacks, such as eavesdropping and hop-by-hop trace back attacks.

  2. SITRUS: Semantic Infrastructure for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Kalil A. Bispo

    2015-10-01

    Full Text Available Wireless sensor networks (WSNs are made up of nodes with limited resources, such as processing, bandwidth, memory and, most importantly, energy. For this reason, it is essential that WSNs always work to reduce the power consumption as much as possible in order to maximize its lifetime. In this context, this paper presents SITRUS (semantic infrastructure for wireless sensor networks, which aims to reduce the power consumption of WSN nodes using ontologies. SITRUS consists of two major parts: a message-oriented middleware responsible for both an oriented message communication service and a reconfiguration service; and a semantic information processing module whose purpose is to generate a semantic database that provides the basis to decide whether a WSN node needs to be reconfigurated or not. In order to evaluate the proposed solution, we carried out an experimental evaluation to assess the power consumption and memory usage of WSN applications built atop SITRUS.

  3. Application of Wireless Sensor Networks to Automobiles

    Science.gov (United States)

    Tavares, Jorge; Velez, Fernando J.; Ferro, João M.

    2008-01-01

    Some applications of Wireless Sensor Networks (WSNs) to the automobile are identified, and the use of Crossbow MICAz motes operating at 2.4 GHz is considered together with TinyOS support. These WSNs are conceived in order to measure, process and supply to the user diverse types of information during an automobile journey. Examples are acceleration and fuel consumption, identification of incorrect tire pressure, verification of illumination, and evaluation of the vital signals of the driver. A brief survey on WSNs concepts is presented, as well as the way the wireless sensor network itself was developed. Calibration curves were produced which allowed for obtaining luminous intensity and temperature values in the appropriate units. Aspects of the definition of the architecture and the choice/implementation of the protocols are identified. Security aspects are also addressed.

  4. Suppressing Redundancy in Wireless Sensor Network Traffic

    Science.gov (United States)

    Abe, Rey; Honiden, Shinichi

    Redundancy suppression is a network traffic compression technique that, by caching recurring transmission contents at receiving nodes, avoids repeatedly sending duplicate data. Existing implementations require abundant memory both to analyze recent traffic for redundancy and to maintain the cache. Wireless sensor nodes at the same time cannot provide such resources due to hardware constraints. The diversity of protocols and traffic patterns in sensor networks furthermore makes the frequencies and proportions of redundancy in traffic unpredictable. The common practice of narrowing down search parameters based on characteristics of representative packet traces when dissecting data for redundancy thus becomes inappropriate. Such difficulties made us devise a novel protocol that conducts a probabilistic traffic analysis to identify and cache only the subset of redundant transfers that yields most traffic savings. We verified this approach to perform close enough to a solution built on exhaustive analysis and unconstrained caching to be practicable.

  5. SITRUS: Semantic Infrastructure for Wireless Sensor Networks.

    Science.gov (United States)

    Bispo, Kalil A; Rosa, Nelson S; Cunha, Paulo R F

    2015-10-29

    Wireless sensor networks (WSNs) are made up of nodes with limited resources, such as processing, bandwidth, memory and, most importantly, energy. For this reason, it is essential that WSNs always work to reduce the power consumption as much as possible in order to maximize its lifetime. In this context, this paper presents SITRUS (semantic infrastructure for wireless sensor networks), which aims to reduce the power consumption of WSN nodes using ontologies. SITRUS consists of two major parts: a message-oriented middleware responsible for both an oriented message communication service and a reconfiguration service; and a semantic information processing module whose purpose is to generate a semantic database that provides the basis to decide whether a WSN node needs to be reconfigurated or not. In order to evaluate the proposed solution, we carried out an experimental evaluation to assess the power consumption and memory usage of WSN applications built atop SITRUS.

  6. An Improved Wireless Sensor Network Routing Algorithm

    Institute of Scientific and Technical Information of China (English)

    Shengmei Luo; Xue Li; Yiai Jin; Zhixin Sun

    2015-01-01

    High performance with low power consumption is an essential factor in wireless sensor networks (WSN). In order to address the issue on the lifetime and the consumption of nodes in WSNs, an improved ad hoc on⁃demand distance vector rout⁃ing (IAODV) algorithm is proposed based on AODV and LAR protocols. This algorithm is a modified on⁃demand routing al⁃gorithm that limits data forwarding in the searching domain, and then chooses the route on basis of hop count and power consumption. The simulation results show that the algorithm can effectively reduce power consumption as well as prolong the network lifetime.

  7. A novel mathematical model for coverage in wireless sensor network

    Institute of Scientific and Technical Information of China (English)

    YAN Zhen-ya; ZHENG Bao-yu

    2006-01-01

    Coverage problem is one of the fundamental issues in the design of wireless sensor network, which has a great impact on the performance of sensor network. In this article,coverage problem was investigated using a mathematical model named Birth-death process. In this model, sensor nodes joining into networks at every period of time is considered as the rebirth of network and the quitting of sensor nodes from the networks is considered as the death of the network. In the end, an analytical solution is used to investigate the appropriate rate to meet the coverage requirement.

  8. Deterministic Secure Positioning in Wireless Sensor Networks

    CERN Document Server

    Delaët, Sylvie; Rokicki, Mariusz; Tixeuil, Sébastien

    2007-01-01

    Properly locating sensor nodes is an important building block for a large subset of wireless sensor networks (WSN) applications. As a result, the performance of the WSN degrades significantly when misbehaving nodes report false location and distance information in order to fake their actual location. In this paper we propose a general distributed deterministic protocol for accurate identification of faking sensors in a WSN. Our scheme does \\emph{not} rely on a subset of \\emph{trusted} nodes that are not allowed to misbehave and are known to every node in the network. Thus, any subset of nodes is allowed to try faking its position. As in previous approaches, our protocol is based on distance evaluation techniques developed for WSN. On the positive side, we show that when the received signal strength (RSS) technique is used, our protocol handles at most $\\lfloor \\frac{n}{2} \\rfloor-2$ faking sensors. Also, when the time of flight (ToF) technique is used, our protocol manages at most $\\lfloor \\frac{n}{2} \\rfloor...

  9. Scaleable wireless web-enabled sensor networks

    Science.gov (United States)

    Townsend, Christopher P.; Hamel, Michael J.; Sonntag, Peter A.; Trutor, B.; Arms, Steven W.

    2002-06-01

    Our goal was to develop a long life, low cost, scalable wireless sensing network, which collects and distributes data from a wide variety of sensors over the internet. Time division multiple access was employed with RF transmitter nodes (each w/unique16 bit address) to communicate digital data to a single receiver (range 1/3 mile). One thousand five channel nodes can communicate to one receiver (30 minute update). Current draw (sleep) is 20 microamps, allowing 5 year battery life w/one 3.6 volt Li-Ion AA size battery. The network nodes include sensor excitation (AC or DC), multiplexer, instrumentation amplifier, 16 bit A/D converter, microprocessor, and RF link. They are compatible with thermocouples, strain gauges, load/torque transducers, inductive/capacitive sensors. The receiver (418 MHz) includes a single board computer (SBC) with Ethernet capability, internet file transfer protocols (XML/HTML), and data storage. The receiver detects data from specific nodes, performs error checking, records the data. The web server interrogates the SBC (from Microsoft's Internet Explorer or Netscape's Navigator) to distribute data. This system can collect data from thousands of remote sensors on a smart structure, and be shared by an unlimited number of users.

  10. Body sensor networks for ubiquitous healthcare

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Body sensor networks provide a platform for ubiquitous healthcare, driving the diagnosis in hospital static environment to the daily life dynamic context. We realized the importance of sensing of activities, which is not only a dimension of human health but also important context information for diagnosis based on the physiologic data. This paper presents our ubiquitous healthcare system, uCare. It consists of uCare devices and a server system. Currently, the uCare system is designed for cardiovascular dise...

  11. Impact of reduced scale free network on wireless sensor network

    Science.gov (United States)

    Keshri, Neha; Gupta, Anurag; Mishra, Bimal Kumar

    2016-12-01

    In heterogeneous wireless sensor network (WSN) each data-packet traverses through multiple hops over restricted communication range before it reaches the sink. The amount of energy required to transmit a data-packet is directly proportional to the number of hops. To balance the energy costs across the entire network and to enhance the robustness in order to improve the lifetime of WSN becomes a key issue of researchers. Due to high dimensionality of an epidemic model of WSN over a general scale free network, it is quite difficult to have close study of network dynamics. To overcome this complexity, we simplify a general scale free network by partitioning all of its motes into two classes: higher-degree motes and lower-degree motes, and equating the degrees of all higher-degree motes with lower-degree motes, yielding a reduced scale free network. We develop an epidemic model of WSN based on reduced scale free network. The existence of unique positive equilibrium is determined with some restrictions. Stability of the system is proved. Furthermore, simulation results show improvements made in this paper have made the entire network have a better robustness to the network failure and the balanced energy costs. This reduced model based on scale free network theory proves more applicable to the research of WSN.

  12. Key handling in wireless sensor networks

    Energy Technology Data Exchange (ETDEWEB)

    Li, Y; Newe, T [Optical Fibre Sensors Research Centre, Department of Electronic and Computer Engineering, University of Limerick, Limerick (Ireland)

    2007-07-15

    With the rapid growth of Wireless Sensor Networks (WSNs), many advanced application areas have received significant attention. However, security will be an important factor for their full adoption. Wireless sensor nodes pose unique challenges and as such traditional security protocols, used in traditional networks cannot be applied directly. Some new protocols have been published recently with the goal of providing both privacy of data and authentication of sensor nodes for WSNs. Such protocols can employ private-key and/or public key cryptographic algorithms. Public key algorithms hold the promise of simplifying the network infrastructure required to provide security services such as: privacy, authentication and non-repudiation, while symmetric algorithms require less processing power on the lower power wireless node. In this paper a selection of key establishment/agreement protocols are reviewed and they are broadly divided into two categories: group key agreement protocols and pair-wise key establishment protocols. A summary of the capabilities and security related services provided by each protocol is provided.

  13. A Wireless Sensor Network Field Study: Network Development, Installation, and Measurement Results

    Science.gov (United States)

    Davis, T. W.; Kuo, C.; van Hemmen, H.; Aouni, A.; Ferriss, E.; Liang, Y.; Liang, X.

    2010-12-01

    The sustainable condition of our freshwater resources partially depends on our understanding of the natural system in which it is cycled. Exploring the status and trends of soil moisture and transpiration can help improve estimates (including flux and storage components) of water budgets on a regional-scale. As a part of this effort, a multi-node wireless network measuring sap flow, soil water content and soil water potential has been deployed in a forested and hill-sloped region in western Pennsylvania. The results of this study are presented in three components. The first is comprised of the issues faced with the development of the node mesh and its evolution to a stable network through the dense vegetation and variable topography. This component includes a comparison of mote battery life, especially over network bottlenecks, and signal transmission statistics, including parenting analysis and data packet loss. The second component examines the design and installation of the sensor nodes. Due to the frequent occurrences of precipitation, water intrusion was a major concern. This is exemplified in the water-proofing techniques used in the box design which enclosed sensors and other vulnerable electronics. The final component reviews the data collected from the network and the different techniques used for processing the measurements. A power saving scheme is tested for removing low mote battery power attenuation in the transmitted data. The results for the soil moisture and sap flow measurements are compared with data collected by a local weather station.

  14. Cooperative distributed target tracking algorithm in mobile wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The paper proposes a cooperative distributed target tracking algorithm in mobile wireless sensor networks.There are two main components in the algorithm:distributed sensor-target assignment and sensor motion control.In the key idea of the sensor-target assignment,sensors are considered as autonomous agents and the defined objective function of each sensor concentrates on two fundamental factors:the tracking accuracy and the tracking cost.Compared with the centralized algorithm and the noncooperative distrib...

  15. Adaptive Sensor Activity Scheduling in Distributed Sensor Networks: A Statistical Mechanics Approach

    OpenAIRE

    Abhishek Srivastav; Asok Ray; Shashi Phoha

    2009-01-01

    This article presents an algorithm for adaptive sensor activity scheduling (A-SAS) in distributed sensor networks to enable detection and dynamic footprint tracking of spatial-temporal events. The sensor network is modeled as a Markov random field on a graph, where concepts of Statistical Mechanics are employed to stochastically activate the sensor nodes. Using an Ising-like formulation, the sleep and wake modes of a sensor node are modeled as spins with ferromagnetic neighborhood interaction...

  16. LWT Based Sensor Node Signal Processing in Vehicle Surveillance Distributed Sensor Network

    Science.gov (United States)

    Cha, Daehyun; Hwang, Chansik

    Previous vehicle surveillance researches on distributed sensor network focused on overcoming power limitation and communication bandwidth constraints in sensor node. In spite of this constraints, vehicle surveillance sensor node must have signal compression, feature extraction, target localization, noise cancellation and collaborative signal processing with low computation and communication energy dissipation. In this paper, we introduce an algorithm for light-weight wireless sensor node signal processing based on lifting scheme wavelet analysis feature extraction in distributed sensor network.

  17. Measuring distance through dense weighted networks: The case of hospital-associated pathogens.

    Directory of Open Access Journals (Sweden)

    Tjibbe Donker

    2017-08-01

    Full Text Available Hospital networks, formed by patients visiting multiple hospitals, affect the spread of hospital-associated infections, resulting in differences in risks for hospitals depending on their network position. These networks are increasingly used to inform strategies to prevent and control the spread of hospital-associated pathogens. However, many studies only consider patients that are received directly from the initial hospital, without considering the effect of indirect trajectories through the network. We determine the optimal way to measure the distance between hospitals within the network, by reconstructing the English hospital network based on shared patients in 2014-2015, and simulating the spread of a hospital-associated pathogen between hospitals, taking into consideration that each intermediate hospital conveys a delay in the further spread of the pathogen. While the risk of transferring a hospital-associated pathogen between directly neighbouring hospitals is a direct reflection of the number of shared patients, the distance between two hospitals far-away in the network is determined largely by the number of intermediate hospitals in the network. Because the network is dense, most long distance transmission chains in fact involve only few intermediate steps, spreading along the many weak links. The dense connectivity of hospital networks, together with a strong regional structure, causes hospital-associated pathogens to spread from the initial outbreak in a two-step process: first, the directly surrounding hospitals are affected through the strong connections, second all other hospitals receive introductions through the multitude of weaker links. Although the strong connections matter for local spread, weak links in the network can offer ideal routes for hospital-associated pathogens to travel further faster. This hold important implications for infection prevention and control efforts: if a local outbreak is not controlled in time

  18. Measuring distance through dense weighted networks: The case of hospital-associated pathogens

    Science.gov (United States)

    Smieszek, Timo; Henderson, Katherine L.; Johnson, Alan P.

    2017-01-01

    Hospital networks, formed by patients visiting multiple hospitals, affect the spread of hospital-associated infections, resulting in differences in risks for hospitals depending on their network position. These networks are increasingly used to inform strategies to prevent and control the spread of hospital-associated pathogens. However, many studies only consider patients that are received directly from the initial hospital, without considering the effect of indirect trajectories through the network. We determine the optimal way to measure the distance between hospitals within the network, by reconstructing the English hospital network based on shared patients in 2014–2015, and simulating the spread of a hospital-associated pathogen between hospitals, taking into consideration that each intermediate hospital conveys a delay in the further spread of the pathogen. While the risk of transferring a hospital-associated pathogen between directly neighbouring hospitals is a direct reflection of the number of shared patients, the distance between two hospitals far-away in the network is determined largely by the number of intermediate hospitals in the network. Because the network is dense, most long distance transmission chains in fact involve only few intermediate steps, spreading along the many weak links. The dense connectivity of hospital networks, together with a strong regional structure, causes hospital-associated pathogens to spread from the initial outbreak in a two-step process: first, the directly surrounding hospitals are affected through the strong connections, second all other hospitals receive introductions through the multitude of weaker links. Although the strong connections matter for local spread, weak links in the network can offer ideal routes for hospital-associated pathogens to travel further faster. This hold important implications for infection prevention and control efforts: if a local outbreak is not controlled in time, colonised patients will

  19. An Efficient Multitask Scheduling Model for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Hongsheng Yin

    2014-01-01

    Full Text Available The sensor nodes of multitask wireless network are constrained in performance-driven computation. Theoretical studies on the data processing model of wireless sensor nodes suggest satisfying the requirements of high qualities of service (QoS of multiple application networks, thus improving the efficiency of network. In this paper, we present the priority based data processing model for multitask sensor nodes in the architecture of multitask wireless sensor network. The proposed model is deduced with the M/M/1 queuing model based on the queuing theory where the average delay of data packets passing by sensor nodes is estimated. The model is validated with the real data from the Huoerxinhe Coal Mine. By applying the proposed priority based data processing model in the multitask wireless sensor network, the average delay of data packets in a sensor nodes is reduced nearly to 50%. The simulation results show that the proposed model can improve the throughput of network efficiently.

  20. Artificial intelligence based event detection in wireless sensor networks

    NARCIS (Netherlands)

    Bahrepour, Majid

    2013-01-01

    Wireless sensor networks (WSNs) are composed of large number of small, inexpensive devices, called sensor nodes, which are equipped with sensing, processing, and communication capabilities. While traditional applications of wireless sensor networks focused on periodic monitoring, the focus of more r

  1. System-level Modeling of Wireless Integrated Sensor Networks

    DEFF Research Database (Denmark)

    Virk, Kashif M.; Hansen, Knud; Madsen, Jan

    2005-01-01

    Wireless integrated sensor networks have emerged as a promising infrastructure for a new generation of monitoring and tracking applications. In order to efficiently utilize the extremely limited resources of wireless sensor nodes, accurate modeling of the key aspects of wireless sensor networks i...

  2. EESA Algorithm in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Pei Zhang

    2014-04-01

    Full Text Available Since there are many problems of traditional extended clustering algorithm in wireless sensor network like short extended time, over energy consumption, too many deviated position the of cluster head nodes and so on, this paper proposes the EESA algorithm. The algorithm makes many improvements on the way of dividing clusters, strategy of electing the cluster head and construction method of data relay path, the two aspects of inter-cluster energy balance and energy balance among the cluster are taken into account at the same time. Detailed simulation results are taken in this thesis to compare network lifetime, average residual energy, energy consumption standard deviation of cluster head node and changes of average remaining energy between the EESA algorithm and ACT algorithm, EECA algorithm and MR-LEACH algorithm; the simulation results show that: the proposed algorithm reduces the load of hot regional cluster head, balances the energy consumption of the entire network nodes and extends the networks lifetime of wireless sensor

  3. Survey on Routing Protocols for Underwater Sensor Networks

    Directory of Open Access Journals (Sweden)

    Aman Sharma

    2012-02-01

    Full Text Available Different routing protocol perform different role in the underwater sensor network. All routing perform each and specific task into underwater sensor network which responsible for networking problems issue that is why this is the latest way of research. Routing term derived from “route” that means a path a way that perform different terms in underwater sensor network problem related issue. The best part is today many routing protocol are present in the underwater wireless sensor network. Some different attributes comes underwater wireless sensor network like likes high bit error rates, limited band-width, 3D deployment and high propagation delay. This paper is referring to as helpful for giving brief overview about each and every protocol and responsible for entire underwater wireless sensor network

  4. Three-dimensional ocean sensor networks: A survey

    Science.gov (United States)

    Wang, Yu; Liu, Yingjian; Guo, Zhongwen

    2012-12-01

    The past decade has seen a growing interest in ocean sensor networks because of their wide applications in marine research, oceanography, ocean monitoring, offshore exploration, and defense or homeland security. Ocean sensor networks are generally formed with various ocean sensors, autonomous underwater vehicles, surface stations, and research vessels. To make ocean sensor network applications viable, efficient communication among all devices and components is crucial. Due to the unique characteristics of underwater acoustic channels and the complex deployment environment in three dimensional (3D) ocean spaces, new efficient and reliable communication and networking protocols are needed in design of ocean sensor networks. In this paper, we aim to provide an overview of the most recent advances in network design principles for 3D ocean sensor networks, with focuses on deployment, localization, topology design, and position-based routing in 3D ocean spaces.

  5. Three-Dimensional Ocean Sensor Networks: A Survey

    Institute of Scientific and Technical Information of China (English)

    WANG Yu; LIU Yingjian; GUO Zhongwen

    2012-01-01

    The past decade has seen a growing interest in ocean sensor networks because of their wide applications in marine research,oceanography,ocean monitoring,offshore exploration,and defense or homeland security.Ocean sensor networks are generally formed with various ocean sensors,autonomous underwater vehicles,surface stations,and research vessels.To make ocean sensor network applications viable,efficient communication among all devices and components is crucial.Due to the unique characteristics of underwater acoustic channels and the complex deployment environment in three dimensional (3D) ocean spaces,new efficient and reliable communication and networking protocols are needed in design of ocean sensor networks.In this paper,we aim to provide an overview of the most recent advances in network design principles for 3D ocean sensor networks,with focuses on deployment,localization,topology design,and position-based routing in 3D ocean spaces.

  6. Ultra wideband technology for wireless sensor networks

    Science.gov (United States)

    Wang, Yue; Xiong, Weiming

    2011-08-01

    Wireless sensor networks (WSNs) have emerged as an important method for planetary surface exploration. To investigate the optimized wireless technology for WSNs, we summarized the key requirements of WSNs and justified ultra wideband (UWB) technology by comparing with other competitive wireless technologies. We also analyzed network topologies as well as physical and MAC layer designs of IEEE 802.15.4a standard, which adopted impulse radio UWB (IR-UWB) technology. Our analysis showed that IR-UWB-based 802.15.4a standard could enable robust communication, precise ranging, and heterogeneous networking for WSNs applications. The result of our present work implies that UWB-based WSNs can be applied to future planetary surface exploration.

  7. Development of Time Synchronized Wireless Sensor Network

    Science.gov (United States)

    Uchimura, Yutaka; Takahashi, Motoichi; Nasu, Tadashi

    Network based wireless sensing has become an important area of research and various new applications for remote sensing are expected to emerge. One of the promising applications is structural health monitoring of building or civil engineering structure and it often requires vibration measurement. For the vibration measurement via wireless network, time synchronization is indispensable. In this paper, we introduce a newly developed time synchronized wireless sensor network system. The system employs IEEE 802.11 standard based TSF counter and sends the measured data with the counter value. It enables consistency on common clock among different wireless nodes. We describe the accuracy evaluation by simulation studies when the size of nodes increased. The hardware and software specifications of the developed wireless sensing system are shown. The experiments were conducted in a three-street reinforced concrete building and results showed the system performs more than sufficiently.

  8. Time synchronization in ad-hoc wireless sensor networks

    Science.gov (United States)

    Sharma, Nishant

    2013-06-01

    Advances in micro-electronics and developments in the various technologies have given birth to this era of wireless sensor networks. A sensor network is the one which provides information about the surrounding environment by sensing it and clock synchronization in wireless sensor networks plays a vital role to maintain the integrity of entire network. In this paper two major low energy consumption clock synchronization algorithms, Reference Broadcast Synchronization (RBS) and Timing-Sync Protocol for Sensor Networks (TPSN) are simulated, which result in high level of accuracy, reliability, handles substantially greater node densities, supports mobility, and hence perform well under all possible conditions.

  9. RESIF Seismology Datacentre : Recently Released Data and New Services. Computing with Dense Seisimic Networks Data.

    Science.gov (United States)

    Volcke, P.; Pequegnat, C.; Grunberg, M.; Lecointre, A.; Bzeznik, B.; Wolyniec, D.; Engels, F.; Maron, C.; Cheze, J.; Pardo, C.; Saurel, J. M.; André, F.

    2015-12-01

    RESIF is a nationwide french project aimed at building a high quality observation system to observe and understand the inner earth. RESIF deals with permanent seismic networks data as well as mobile networks data, including dense/semi-dense arrays. RESIF project is distributed among different nodes providing qualified data to the main datacentre in Université Grenoble Alpes, France. Data control and qualification is performed by each individual nodes : the poster will provide some insights on RESIF broadband seismic component data quality control. We will then present data that has been recently made publicly available. Data is distributed through worldwide FDSN and european EIDA standards protocols. A new web portal is now opened to explore and download seismic data and metadata. The RESIF datacentre is also now connected to Grenoble University High Performance Computing (HPC) facility : a typical use-case will be presented using iRODS technologies. The use of dense observation networks is increasing, bringing challenges in data growth and handling : we will present an example where HDF5 data format was used as an alternative to usual seismology data formats.

  10. Sensors on speaking terms: Schedule-based medium access control protocols for wireless sensor networks

    NARCIS (Netherlands)

    van Hoesel, L.F.W.

    2007-01-01

    Wireless sensor networks make the previously unobservable, observable. The basic idea behind these networks is straightforward: all wires are cut in traditional sensing systems and the sensors are equipped with batteries and radio's to virtually restore the cut wires. The resulting sensors can be pl

  11. Sensors on speaking terms : schedule-based medium access control protocols for wireless sensor networks

    NARCIS (Netherlands)

    Hoesel, van Lodewijk Frans Willem

    2007-01-01

    Wireless sensor networks make the previously unobservable, observable. The basic idea behind these networks is straightforward: all wires are cut in traditional sensing systems and the sensors are equipped with batteries and radio’s to virtually restore the cut wires. The resulting sensors can be pl

  12. Virtualization in Wireless Sensor Network: Challenges and Opportunities

    Directory of Open Access Journals (Sweden)

    Md. Motaharul Islam

    2012-03-01

    Full Text Available Wireless Sensor Networks (WSNs are gaining importance for their broad range of commercial applications such as in home automation, health-care and industrial automation. In these applications multi-vendor and heterogeneous sensor nodes are deployed. Due to strict administrative control over the WSN domains, communication barrier, conflicting goal & economic interest of different vendors of sensor node in WSN make it difficult to introduce a large scale federated WSN. By allowing heterogeneous wireless sensor networks to coexist on a shared physical substrate, virtualization in sensor network may provide flexibility, promote diversity, ensure security and increase manageability. This paper surveys the novel approach of using the large scale federated WSN resources in a sensor virtualization environment. In this paper we propose sensor virtualization architecture and focus on the challenges and opportunities of research in the field of sensor network virtualization as well as to illustrate a picture of current researches in this field.

  13. a survey of security vulnerabilities in wireless sensor networks

    African Journals Online (AJOL)

    user

    Sensor networks offer a powerful combination of distributed sensing, computing and communications. They lend ... These tiny sensor nodes, consisting of sensing, data ... base station (or gateway) which in turn sends it to the user as shown in ...

  14. An Interference-Aware Distributed Transmission Technique for Dense Small Cell Networks

    DEFF Research Database (Denmark)

    Mahmood, Nurul Huda; Berardinelli, Gilberto; Pedersen, Klaus I.

    2015-01-01

    transmission technique that can efficiently manage the interference in an uncoordinated dense small cell network is investigated in this work. The proposed interference aware scheme only requires instantaneous channel state information at the transmitter end towards the desired receiver. Motivated by penalty...... methods in optimization studies, an interference dependent weighting factor is introduced to control the number of parallel transmission streams. The proposed scheme can outperform a more complex benchmark transmission scheme in terms of the sum network throughput in certain scenarios and with realistic...

  15. Joint Device Positioning and Clock Synchronization in 5G Ultra-Dense Networks

    OpenAIRE

    Koivisto, Mike; Costa, Mário; Werner, Janis; Heiska, Kari; Talvitie, Jukka; Leppänen, Kari; Koivunen, Visa; Valkama, Mikko

    2016-01-01

    In this article, we address the prospects and key enabling technologies for highly efficient and accurate device positioning and tracking in 5G radio access networks. Building on the premises of ultra-dense networks as well as on the adoption of multicarrier waveforms and antenna arrays in the access nodes (ANs), we first formulate extended Kalman filter (EKF)-based solutions for computationally efficient joint estimation and tracking of the time of arrival (ToA) and direction of arrival (DoA...

  16. Low-power Radar for Wireless Sensor Networks

    NARCIS (Netherlands)

    Ditzel, M.; Elferink, F.H.

    2006-01-01

    Abstract—This paper presents the results of a short study on the feasibility of radars as the primary means of sensing in ad-hoc wireless sensor networks. Radar offers distinct advantages over others means of sensing, normally found in this kind of networks. The sensor networks being considered cons

  17. An Efficient Management System for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Mei-Yu Lee

    2010-12-01

    Full Text Available Wireless sensor networks have garnered considerable attention recently. Networks typically have many sensor nodes, and are used in commercial, medical, scientific, and military applications for sensing and monitoring the physical world. Many researchers have attempted to improve wireless sensor network management efficiency. A Simple Network Management Protocol (SNMP-based sensor network management system was developed that is a convenient and effective way for managers to monitor and control sensor network operations. This paper proposes a novel WSNManagement system that can show the connections stated of relationships among sensor nodes and can be used for monitoring, collecting, and analyzing information obtained by wireless sensor networks. The proposed network management system uses collected information for system configuration. The function of performance analysis facilitates convenient management of sensors. Experimental results show that the proposed method enhances the alive rate of an overall sensor node system, reduces the packet lost rate by roughly 5%, and reduces delay time by roughly 0.2 seconds. Performance analysis demonstrates that the proposed system is effective for wireless sensor network management.

  18. An efficient management system for wireless sensor networks.

    Science.gov (United States)

    Ma, Yi-Wei; Chen, Jiann-Liang; Huang, Yueh-Min; Lee, Mei-Yu

    2010-01-01

    Wireless sensor networks have garnered considerable attention recently. Networks typically have many sensor nodes, and are used in commercial, medical, scientific, and military applications for sensing and monitoring the physical world. Many researchers have attempted to improve wireless sensor network management efficiency. A Simple Network Management Protocol (SNMP)-based sensor network management system was developed that is a convenient and effective way for managers to monitor and control sensor network operations. This paper proposes a novel WSNManagement system that can show the connections stated of relationships among sensor nodes and can be used for monitoring, collecting, and analyzing information obtained by wireless sensor networks. The proposed network management system uses collected information for system configuration. The function of performance analysis facilitates convenient management of sensors. Experimental results show that the proposed method enhances the alive rate of an overall sensor node system, reduces the packet lost rate by roughly 5%, and reduces delay time by roughly 0.2 seconds. Performance analysis demonstrates that the proposed system is effective for wireless sensor network management.

  19. Ubiquitous Mobile Awareness from Sensor Networks

    Science.gov (United States)

    Kanter, Theo; Pettersson, Stefan; Forsström, Stefan; Kardeby, Victor; Österberg, Patrik

    Users require applications and services to be available everywhere, enabling them to focus on what is important to them. Therefore, context information (e.g., spatial data, user preferences, available connectivity and devices, etc.) has to be accessible to applications that run in end systems close to users. In response to this, we present a novel architecture for ubiquitous sensing and sharing of context in mobile services and applications. The architecture offers distributed storage of context derived from sensor networks wirelessly attached to mobile phones and other devices. The architecture also handles frequent updates of sensor information and is interoperable with presence in 3G mobile systems, thus enabling ubiquitous sensing applications. We demonstrate these concepts and the principle operation in a sample ubiquitous Mobile Awareness service.

  20. Wireless Sensor Networks Formation: Approaches and Techniques

    Directory of Open Access Journals (Sweden)

    Miriam Carlos-Mancilla

    2016-01-01

    Full Text Available Nowadays, wireless sensor networks (WSNs emerge as an active research area in which challenging topics involve energy consumption, routing algorithms, selection of sensors location according to a given premise, robustness, efficiency, and so forth. Despite the open problems in WSNs, there are already a high number of applications available. In all cases for the design of any application, one of the main objectives is to keep the WSN alive and functional as long as possible. A key factor in this is the way the network is formed. This survey presents most recent formation techniques and mechanisms for the WSNs. In this paper, the reviewed works are classified into distributed and centralized techniques. The analysis is focused on whether a single or multiple sinks are employed, nodes are static or mobile, the formation is event detection based or not, and network backbone is formed or not. We focus on recent works and present a discussion of their advantages and drawbacks. Finally, the paper overviews a series of open issues which drive further research in the area.

  1. Simultaneity Analysis In A Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Malović Miodrag

    2015-06-01

    Full Text Available An original wireless sensor network for vibration measurements was designed. Its primary purpose is modal analysis of vibrations of large structures. A number of experiments have been performed to evaluate the system, with special emphasis on the influence of different effects on simultaneity of data acquired from remote nodes, which is essential for modal analysis. One of the issues is that quartz crystal oscillators, which provide time reading on the devices, are optimized for use in the room temperature and exhibit significant frequency variations if operated outside the 20–30°C range. Although much research was performed to optimize algorithms of synchronization in wireless networks, the subject of temperature fluctuations was not investigated and discussed in proportion to its significance. This paper describes methods used to evaluate data simultaneity and some algorithms suitable for its improvement in small to intermediate size ad-hoc wireless sensor networks exposed to varying temperatures often present in on-site civil engineering measurements.

  2. Cognitive Radio Wireless Sensor Networks: Applications, Challenges and Research Trends

    Directory of Open Access Journals (Sweden)

    Gyanendra Prasad Joshi

    2013-08-01

    Full Text Available A cognitive radio wireless sensor network is one of the candidate areas where cognitive techniques can be used for opportunistic spectrum access. Research in this area is still in its infancy, but it is progressing rapidly. The aim of this study is to classify the existing literature of this fast emerging application area of cognitive radio wireless sensor networks, highlight the key research that has already been undertaken, and indicate open problems. This paper describes the advantages of cognitive radio wireless sensor networks, the difference between ad hoc cognitive radio networks, wireless sensor networks, and cognitive radio wireless sensor networks, potential application areas of cognitive radio wireless sensor networks, challenges and research trend in cognitive radio wireless sensor networks. The sensing schemes suited for cognitive radio wireless sensor networks scenarios are discussed with an emphasis on cooperation and spectrum access methods that ensure the availability of the required QoS. Finally, this paper lists several open research challenges aimed at drawing the attention of the readers toward the important issues that need to be addressed before the vision of completely autonomous cognitive radio wireless sensor networks can be realized.

  3. Multipath Routing in Wireless Sensor Networks: Survey and Research Challenges

    Directory of Open Access Journals (Sweden)

    Marjan Radi

    2012-01-01

    Full Text Available A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks.

  4. Cognitive radio wireless sensor networks: applications, challenges and research trends.

    Science.gov (United States)

    Joshi, Gyanendra Prasad; Nam, Seung Yeob; Kim, Sung Won

    2013-08-22

    A cognitive radio wireless sensor network is one of the candidate areas where cognitive techniques can be used for opportunistic spectrum access. Research in this area is still in its infancy, but it is progressing rapidly. The aim of this study is to classify the existing literature of this fast emerging application area of cognitive radio wireless sensor networks, highlight the key research that has already been undertaken, and indicate open problems. This paper describes the advantages of cognitive radio wireless sensor networks, the difference between ad hoc cognitive radio networks, wireless sensor networks, and cognitive radio wireless sensor networks, potential application areas of cognitive radio wireless sensor networks, challenges and research trend in cognitive radio wireless sensor networks. The sensing schemes suited for cognitive radio wireless sensor networks scenarios are discussed with an emphasis on cooperation and spectrum access methods that ensure the availability of the required QoS. Finally, this paper lists several open research challenges aimed at drawing the attention of the readers toward the important issues that need to be addressed before the vision of completely autonomous cognitive radio wireless sensor networks can be realized.

  5. Multipath routing in wireless sensor networks: survey and research challenges.

    Science.gov (United States)

    Radi, Marjan; Dezfouli, Behnam; Abu Bakar, Kamalrulnizam; Lee, Malrey

    2012-01-01

    A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks.

  6. 7th China Conference on Wireless Sensor Networks

    CERN Document Server

    Cui, Li; Guo, Zhongwen

    2014-01-01

    Advanced Technologies in Ad Hoc and Sensor Networks collects selected papers from the 7th China Conference on Wireless Sensor Networks (CWSN2013) held in Qingdao, October 17-19, 2013. The book features state-of-the-art studies on Sensor Networks in China with the theme of “Advances in wireless sensor networks of China”. The selected works can help promote development of sensor network technology towards interconnectivity, resource sharing, flexibility and high efficiency. Researchers and engineers in the field of sensor networks can benefit from the book. Xue Wang is a professor at Tsinghua University; Li Cui is a professor at Institute of Computing Technology, Chinese Academy of Sciences; Zhongwen Guo is a professor at Ocean University of China.

  7. A Review on Sensor Network Issues and Robotics

    Directory of Open Access Journals (Sweden)

    Ji Hyoung Ryu

    2015-01-01

    Full Text Available The interaction of distributed robotics and wireless sensor networks has led to the creation of mobile sensor networks. There has been an increasing interest in building mobile sensor networks and they are the favored class of WSNs in which mobility plays a key role in the execution of an application. More and more researches focus on development of mobile wireless sensor networks (MWSNs due to its favorable advantages and applications. In WSNs robotics can play a crucial role, and integrating static nodes with mobile robots enhances the capabilities of both types of devices and enables new applications. In this paper we present an overview on mobile sensor networks in robotics and vice versa and robotic sensor network applications.

  8. From sparse to dense and from assortative to disassortative in online social networks

    Science.gov (United States)

    Li, Menghui; Guan, Shuguang; Wu, Chensheng; Gong, Xiaofeng; Li, Kun; Wu, Jinshan; di, Zengru; Lai, Choy-Heng

    2014-05-01

    Inspired by the analysis of several empirical online social networks, we propose a simple reaction-diffusion-like coevolving model, in which individuals are activated to create links based on their states, influenced by local dynamics and their own intention. It is shown that the model can reproduce the remarkable properties observed in empirical online social networks; in particular, the assortative coefficients are neutral or negative, and the power law exponents γ are smaller than 2. Moreover, we demonstrate that, under appropriate conditions, the model network naturally makes transition(s) from assortative to disassortative, and from sparse to dense in their characteristics. The model is useful in understanding the formation and evolution of online social networks.

  9. Enterprise virtual private network (VPN) with dense wavelength division multiplexing (DWDM) design

    Science.gov (United States)

    Carranza, Aparicio

    An innovative computer simulation and modeling tool for metropolitan area optical data communication networks is presented. These models address the unique requirements of Virtual Private Networks for enterprise data centers, which may comprise a mixture of protocols including ESCON, FICON, Fibre Channel, Sysplex protocols (ETR, CLO, ISC); and other links interconnected over dark fiber using Dense Wavelength Division Multiplexing (DWDM). Our models have the capability of designing a network with minimal inputs; to compute optical link budgets; suggest alternative configurations; and also optimize the design based on user-defined performance metrics. The models make use of Time Division Multiplexing (TDM) wherever possible for lower data rate traffics. Simulation results for several configurations are presented and they have been validated by means of experiments conducted on the IBM enterprise network testbed in Poughkeepsie, N.Y.

  10. From sparse to dense and from assortative to disassortative in online social networks.

    Science.gov (United States)

    Li, Menghui; Guan, Shuguang; Wu, Chensheng; Gong, Xiaofeng; Li, Kun; Wu, Jinshan; Di, Zengru; Lai, Choy-Heng

    2014-01-01

    Inspired by the analysis of several empirical online social networks, we propose a simple reaction-diffusion-like coevolving model, in which individuals are activated to create links based on their states, influenced by local dynamics and their own intention. It is shown that the model can reproduce the remarkable properties observed in empirical online social networks; in particular, the assortative coefficients are neutral or negative, and the power law exponents γ are smaller than 2. Moreover, we demonstrate that, under appropriate conditions, the model network naturally makes transition(s) from assortative to disassortative, and from sparse to dense in their characteristics. The model is useful in understanding the formation and evolution of online social networks.

  11. Effects of fading and spatial correlation on node selection for estimation in Wireless Sensor Networks

    KAUST Repository

    Al-Murad, Tamim M.

    2010-06-01

    In densely deployed sensor networks, correlation among measurements may be high. Spatial sampling through node selection is usually used to minimize this correlation and to save energy consumption. However because of the fading nature of the wireless channels, extra care should be taken when performing this sampling. In this paper, we develop expressions for the distortion which include the channel effects. The asymptotic behavior of the distortion as the number of sensors or total transmit power increase without bound is also investigated. Further, based on the channel and position information we propose and test several node selection schemes.

  12. Industrial wireless sensor networks applications, protocols, and standards

    CERN Document Server

    Güngör, V Çagri

    2013-01-01

    The collaborative nature of industrial wireless sensor networks (IWSNs) brings several advantages over traditional wired industrial monitoring and control systems, including self-organization, rapid deployment, flexibility, and inherent intelligent processing. In this regard, IWSNs play a vital role in creating more reliable, efficient, and productive industrial systems, thus improving companies' competitiveness in the marketplace. Industrial Wireless Sensor Networks: Applications, Protocols, and Standards examines the current state of the art in industrial wireless sensor networks and outline

  13. Susceptibility of sensor networks to intentional electromagnetic interference

    OpenAIRE

    Delsing, Jerker; Ekman, Jonas; Johansson, Jonny; Sundberg, Sofia; Bäckström, Mats; Nilsson, T.

    2006-01-01

    It is reasonable to think that sensor networks might be part of society critical systems in the future. Therefor this paper discusses and shows the vulnerabilities of sensor networks to intentional electromagnetic interference (IEMI). Principle ways of sensor network IEMI is addressed and followed by a discussion on schemes for protection. Experimental results for both in-band and exband interference from low- and high- level sources is reported. It is obvious that more emphasis has to be put...

  14. Key Predistribution Schemes for Distributed Sensor Networks

    CERN Document Server

    Bose, Mausumi; Mukerjee, Rahul

    2011-01-01

    Key predistribution schemes for distributed sensor networks have received significant attention in the recent literature. In this paper we propose a new construction method for these schemes based on combinations of duals of standard block designs. Our method is a broad spectrum one which works for any intersection threshold. By varying the initial designs, we can generate various schemes and this makes the method quite flexible. We also obtain explicit algebraic expressions for the metrics for local connectivity and resiliency. These schemes are quite efficient with regard to connectivity and resiliency and at the same time they allow a straightforward shared-key discovery.

  15. BABY MONITORING SYSTEM USING WIRELESS SENSOR NETWORKS

    Directory of Open Access Journals (Sweden)

    G. Rajesh

    2014-09-01

    Full Text Available Sudden Infant Death Syndrome (SIDS is marked by the sudden death of an infant during sleep that is not predicted by the medical history and remains unexplained even after thorough forensic autopsy and detailed death investigation. In this we developed a system that provides solutions for the above problems by making the crib smart using the wireless sensor networks (WSN and smart phones. The system provides visual monitoring service through live video, alert services by crib fencing and awakens alert, monitoring services by temperature reading and light intensity reading, vaccine reminder and weight monitoring.

  16. Wireless sensor networks from theory to applications

    CERN Document Server

    El Emary, Ibrahiem M M

    2013-01-01

    Although there are many books available on WSNs, most are low-level, introductory books. The few available for advanced readers fail to convey the breadth of knowledge required for those aiming to develop next-generation solutions for WSNs. Filling this void, Wireless Sensor Networks: From Theory to Applications supplies comprehensive coverage of WSNs. In order to provide the wide-ranging guidance required, the book brings together the contributions of domain experts working in the various subfields of WSNs worldwide. This edited volume examines recent advances in WSN technologies and consider

  17. Wireless sensors networks MAC protocols analysis

    CERN Document Server

    Chaari, Lamia

    2010-01-01

    Wireless sensors networks performance are strictly related to the medium access mechanism. An effective one, require non-conventional paradigms for protocol design due to several constraints. An adequate equilibrium between communication improvement and data processing capabilities must be accomplished. To achieve low power operation, several MAC protocols already proposed for WSN. The aim of this paper is to survey and to analyze the most energy efficient MAC protocol in order to categorize them and to compare their performances. Furthermore we have implemented some of WSN MAC protocol under OMNET++ with the purpose to evaluate their performances.

  18. Energy Efficiency in Underwater Sensor Networks: a Research Review

    Directory of Open Access Journals (Sweden)

    V. Kanakaris

    2010-01-01

    Full Text Available In an energy-constrained underwater system environment it is very important to find ways to improve the life expectancy ofthe sensors. Compared to the sensors of a terrestrial Ad Hoc Wireless Sensor Network (WSN, underwater sensors cannotuse solar energy to recharge the batteries, and it is difficult to replace the batteries in the sensors. This paper reviews theresearch progress made to date in the area of energy consumption in underwater sensor networks (UWSN and suggestsfurther research that needs to be carried out in order to increase the energy efficiency of the UWSN system.

  19. Underwater Electromagnetic Sensor Networks, Part II: Localization and Network Simulations

    Directory of Open Access Journals (Sweden)

    Javier Zazo

    2016-12-01

    Full Text Available In the first part of the paper, we modeled and characterized the underwater radio channel in shallowwaters. In the second part,we analyze the application requirements for an underwaterwireless sensor network (U-WSN operating in the same environment and perform detailed simulations. We consider two localization applications, namely self-localization and navigation aid, and propose algorithms that work well under the specific constraints associated with U-WSN, namely low connectivity, low data rates and high packet loss probability. We propose an algorithm where the sensor nodes collaboratively estimate their unknown positions in the network using a low number of anchor nodes and distance measurements from the underwater channel. Once the network has been self-located, we consider a node estimating its position for underwater navigation communicating with neighboring nodes. We also propose a communication system and simulate the whole electromagnetic U-WSN in the Castalia simulator to evaluate the network performance, including propagation impairments (e.g., noise, interference, radio parameters (e.g., modulation scheme, bandwidth, transmit power, hardware limitations (e.g., clock drift, transmission buffer and complete MAC and routing protocols. We also explain the changes that have to be done to Castalia in order to perform the simulations. In addition, we propose a parametric model of the communication channel that matches well with the results from the first part of this paper. Finally, we provide simulation results for some illustrative scenarios.

  20. Underwater Electromagnetic Sensor Networks, Part II: Localization and Network Simulations.

    Science.gov (United States)

    Zazo, Javier; Macua, Sergio Valcarcel; Zazo, Santiago; Pérez, Marina; Pérez-Álvarez, Iván; Jiménez, Eugenio; Cardona, Laura; Brito, Joaquín Hernández; Quevedo, Eduardo

    2016-12-17

    In the first part of the paper, we modeled and characterized the underwater radio channel in shallowwaters. In the second part,we analyze the application requirements for an underwaterwireless sensor network (U-WSN) operating in the same environment and perform detailed simulations. We consider two localization applications, namely self-localization and navigation aid, and propose algorithms that work well under the specific constraints associated with U-WSN, namely low connectivity, low data rates and high packet loss probability. We propose an algorithm where the sensor nodes collaboratively estimate their unknown positions in the network using a low number of anchor nodes and distance measurements from the underwater channel. Once the network has been self-located, we consider a node estimating its position for underwater navigation communicating with neighboring nodes. We also propose a communication system and simulate the whole electromagnetic U-WSN in the Castalia simulator to evaluate the network performance, including propagation impairments (e.g., noise, interference), radio parameters (e.g., modulation scheme, bandwidth, transmit power), hardware limitations (e.g., clock drift, transmission buffer) and complete MAC and routing protocols. We also explain the changes that have to be done to Castalia in order to perform the simulations. In addition, we propose a parametric model of the communication channel that matches well with the results from the first part of this paper. Finally, we provide simulation results for some illustrative scenarios.

  1. Underwater Electromagnetic Sensor Networks, Part II: Localization and Network Simulations

    Science.gov (United States)

    Zazo, Javier; Valcarcel Macua, Sergio; Zazo, Santiago; Pérez, Marina; Pérez-Álvarez, Iván; Jiménez, Eugenio; Cardona, Laura; Brito, Joaquín Hernández; Quevedo, Eduardo

    2016-01-01

    In the first part of the paper, we modeled and characterized the underwater radio channel in shallow waters. In the second part, we analyze the application requirements for an underwater wireless sensor network (U-WSN) operating in the same environment and perform detailed simulations. We consider two localization applications, namely self-localization and navigation aid, and propose algorithms that work well under the specific constraints associated with U-WSN, namely low connectivity, low data rates and high packet loss probability. We propose an algorithm where the sensor nodes collaboratively estimate their unknown positions in the network using a low number of anchor nodes and distance measurements from the underwater channel. Once the network has been self-located, we consider a node estimating its position for underwater navigation communicating with neighboring nodes. We also propose a communication system and simulate the whole electromagnetic U-WSN in the Castalia simulator to evaluate the network performance, including propagation impairments (e.g., noise, interference), radio parameters (e.g., modulation scheme, bandwidth, transmit power), hardware limitations (e.g., clock drift, transmission buffer) and complete MAC and routing protocols. We also explain the changes that have to be done to Castalia in order to perform the simulations. In addition, we propose a parametric model of the communication channel that matches well with the results from the first part of this paper. Finally, we provide simulation results for some illustrative scenarios. PMID:27999309

  2. LinkMind: link optimization in swarming mobile sensor networks.

    Science.gov (United States)

    Ngo, Trung Dung

    2011-01-01

    A swarming mobile sensor network is comprised of a swarm of wirelessly connected mobile robots equipped with various sensors. Such a network can be applied in an uncertain environment for services such as cooperative navigation and exploration, object identification and information gathering. One of the most advantageous properties of the swarming wireless sensor network is that mobile nodes can work cooperatively to organize an ad-hoc network and optimize the network link capacity to maximize the transmission of gathered data from a source to a target. This paper describes a new method of link optimization of swarming mobile sensor networks. The new method is based on combination of the artificial potential force guaranteeing connectivities of the mobile sensor nodes and the max-flow min-cut theorem of graph theory ensuring optimization of the network link capacity. The developed algorithm is demonstrated and evaluated in simulation.

  3. LinkMind: Link Optimization in Swarming Mobile Sensor Networks

    Directory of Open Access Journals (Sweden)

    Trung Dung Ngo

    2011-08-01

    Full Text Available A swarming mobile sensor network is comprised of a swarm of wirelessly connected mobile robots equipped with various sensors. Such a network can be applied in an uncertain environment for services such as cooperative navigation and exploration, object identification and information gathering. One of the most advantageous properties of the swarming wireless sensor network is that mobile nodes can work cooperatively to organize an ad-hoc network and optimize the network link capacity to maximize the transmission of gathered data from a source to a target. This paper describes a new method of link optimization of swarming mobile sensor networks. The new method is based on combination of the artificial potential force guaranteeing connectivities of the mobile sensor nodes and the max-flow min-cut theorem of graph theory ensuring optimization of the network link capacity. The developed algorithm is demonstrated and evaluated in simulation.

  4. Novel Framework for Data Collection in Wireless Sensor Networks Using Flying Sensors

    DEFF Research Database (Denmark)

    Mathur, Prateek; Nielsen, Rasmus Hjorth; Prasad, Neeli R.

    2014-01-01

    This paper proposes a novel framework for data collection from a sensor network using flying sensor nodes. Efficient data communication within the network is a necessity as sensor nodes are usually energy constrained. The proposed framework utilizes the various entities forming the network...... for a different utility compared to their usual role in sensor networks. Use of flying sensor nodes is usually considered for conventional purpose of sensing and monitoring. Flying sensing nodes are usually utilized collectively in the form of an aerial sensor network, they are not expected to function as a data...... collection entity, as proposed in this framework. Similarly, cluster heads (CHs) are usually expected to transfer the aggregated data to an adjoining CH or to the base station (BS) directly. In the proposed framework the CH transfers data directly to the flying sensor node, averting the need for energy...

  5. Protocols for Wireless Sensor Networks and Its Security

    Directory of Open Access Journals (Sweden)

    Dr. Adil Jamil Zaru

    2016-12-01

    Full Text Available This paper proposes a protocol for Wireless Sensor Networks and its security which are characterized by severely constrained computational and energy resources, and an ad hoc operational environment. The paper first introduces sensor networks, and discusses security issues and goals along with security problems, threats, and risks in sensor networks. It describes crippling attacks against all of them and suggests countermeasures and design considerations. It gives a brief introduction of proposed security protocol SPINS whose building blocks are SNEP and μTESLA which overcome all the important security threats and problems and achieves security goals like data confidentiality, freshness, authentication in order to provide a secure Wireless Sensor Network.

  6. An Extended Hierarchical Trusted Model for Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    DU Ruiying; XU Mingdi; ZHANG Huanguo

    2006-01-01

    Cryptography and authentication are traditional approach for providing network security. However, they are not sufficient for solving the problems which malicious nodes compromise whole wireless sensor network leading to invalid data transmission and wasting resource by using vicious behaviors. This paper puts forward an extended hierarchical trusted architecture for wireless sensor network, and establishes trusted congregations by three-tier framework. The method combines statistics, economics with encrypt mechanism for developing two trusted models which evaluate cluster head nodes and common sensor nodes respectively. The models form logical trusted-link from command node to common sensor nodes and guarantees the network can run in secure and reliable circumstance.

  7. On the feasibility of measuring urban air pollution by wireless distributed sensor networks.

    Science.gov (United States)

    Moltchanov, Sharon; Levy, Ilan; Etzion, Yael; Lerner, Uri; Broday, David M; Fishbain, Barak

    2015-01-01

    Accurate evaluation of air pollution on human-wellbeing requires high-resolution measurements. Standard air quality monitoring stations provide accurate pollution levels but due to their sparse distribution they cannot capture the highly resolved spatial variations within cities. Similarly, dedicated field campaigns can use tens of measurement devices and obtain highly dense spatial coverage but normally deployment has been limited to short periods of no more than few weeks. Nowadays, advances in communication and sensory technologies enable the deployment of dense grids of wireless distributed air monitoring nodes, yet their sensor ability to capture the spatiotemporal pollutant variability at the sub-neighborhood scale has never been thoroughly tested. This study reports ambient measurements of gaseous air pollutants by a network of six wireless multi-sensor miniature nodes that have been deployed in three urban sites, about 150 m apart. We demonstrate the network's capability to capture spatiotemporal concentration variations at an exceptional fine resolution but highlight the need for a frequent in-situ calibration to maintain the consistency of some sensors. Accordingly, a procedure for a field calibration is proposed and shown to improve the system's performance. Overall, our results support the compatibility of wireless distributed sensor networks for measuring urban air pollution at a sub-neighborhood spatial resolution, which suits the requirement for highly spatiotemporal resolved measurements at the breathing-height when assessing exposure to urban air pollution.

  8. Clustering in Wireless Sensor Networks- A Survey

    Directory of Open Access Journals (Sweden)

    Sukhkirandeep Kaur

    2016-06-01

    Full Text Available Increased demand of Wireless Sensor Networks (WSN in various applications has made it a hot research area. Several challenges imposed which include energy conservation, scalability, limited network resources etc. with energy conservation being the most important. Clustering improves the energy efficiency by making high power nodes as cluster heads (CHs which reduces the chance of energy depletion of nodes. Scalability, fault tolerance, data aggregation, energy efficiency are some of the main objectives of clustering. This paper discusses various challenges associated with clustering and different methods or techniques developed to overcome these challenges. Various clustering approaches have been summarized and few prominent Quality of service (QoS based clustering routing protocols for WSN have been identified. Comparison of these approaches and protocols is discussed based on some parameters.

  9. Node Clustering for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sania Bhatti

    2012-01-01

    Full Text Available Recent years have witnessed considerable growth in the development and deployment of clustering methods which are not only used to maintain network resources but also increases the reliability of the WSNs (Wireless Sensor Network and the facts manifest by the wide range of clustering solutions. Node clustering by selecting key parameters to tackle the dynamic behaviour of resource constraint WSN is a challenging issue. This paper highlights the recent progress which has been carried out pertaining to the development of clustering solutions for the WSNs. The paper presents classification of node clustering methods and their comparison based on the objectives, clustering criteria and methodology. In addition, the potential open issues which need to be considered for future work are high lighted.

  10. Decentralized Sensor Fusion for Ubiquitous Networking Robotics in Urban Areas

    Science.gov (United States)

    Sanfeliu, Alberto; Andrade-Cetto, Juan; Barbosa, Marco; Bowden, Richard; Capitán, Jesús; Corominas, Andreu; Gilbert, Andrew; Illingworth, John; Merino, Luis; Mirats, Josep M.; Moreno, Plínio; Ollero, Aníbal; Sequeira, João; Spaan, Matthijs T.J.

    2010-01-01

    In this article we explain the architecture for the environment and sensors that has been built for the European project URUS (Ubiquitous Networking Robotics in Urban Sites), a project whose objective is to develop an adaptable network robot architecture for cooperation between network robots and human beings and/or the environment in urban areas. The project goal is to deploy a team of robots in an urban area to give a set of services to a user community. This paper addresses the sensor architecture devised for URUS and the type of robots and sensors used, including environment sensors and sensors onboard the robots. Furthermore, we also explain how sensor fusion takes place to achieve urban outdoor execution of robotic services. Finally some results of the project related to the sensor network are highlighted. PMID:22294927

  11. Decentralized Sensor Fusion for Ubiquitous Networking Robotics in Urban Areas

    Directory of Open Access Journals (Sweden)

    Aníbal Ollero

    2010-03-01

    Full Text Available In this article we explain the architecture for the environment and sensors that has been built for the European project URUS (Ubiquitous Networking Robotics in Urban Sites, a project whose objective is to develop an adaptable network robot architecture for cooperation between network robots and human beings and/or the environment in urban areas. The project goal is to deploy a team of robots in an urban area to give a set of services to a user community. This paper addresses the sensor architecture devised for URUS and the type of robots and sensors used, including environment sensors and sensors onboard the robots. Furthermore, we also explain how sensor fusion takes place to achieve urban outdoor execution of robotic services. Finally some results of the project related to the sensor network are highlighted.

  12. Network architecture design of an agile sensing system with sandwich wireless sensor nodes

    Science.gov (United States)

    Dorvash, S.; Li, X.; Pakzad, S.; Cheng, L.

    2012-04-01

    Wireless sensor network (WSN) is recently emerged as a powerful tool in the structural health monitoring (SHM). Due to the limitations of wireless channel capacity and the heavy data traffic, the control on the network is usually not real time. On the other hand, many SHM applications require quick response when unexpected events, such as earthquake, happen. Realizing the need to have an agile monitoring system, an approach, called sandwich node, was proposed. Sandwich is a design of complex sensor node where two Imote2 nodes are connected with each other to enhance the capabilities of the sensing units. The extra channel and processing power, added into the nodes, enable agile responses of the sensing network, particularly in interrupting the network and altering the undergoing tasks for burst events. This paper presents the design of a testbed for examination of the performance of wireless sandwich nodes in a network. The designed elements of the network are the software architecture of remote and local nodes, and the triggering strategies for coordinating the sensing units. The performance of the designed network is evaluated through its implementation in a monitoring test in the laboratory. For both original Imote2 and the sandwich node, the response time is estimated. The results show that the sandwich node is an efficient solution to the collision issue in existing interrupt approaches and the latency in dense wireless sensor networks.

  13. Green Modulation in Proactive Wireless Sensor Networks

    CERN Document Server

    Abouei, Jamshid; Pasupathy, Subbarayan

    2009-01-01

    Due to unique characteristics of sensor nodes, choosing energy-efficient modulation scheme with low-complexity implementation (refereed to as green modulation) is a critical factor in the physical layer of Wireless Sensor Networks (WSNs). This paper presents (to the best of our knowledge) the first in-depth analysis of energy efficiency of various modulation schemes using realistic models in IEEE 802.15.4 standard and present state-of-the art technology, to find the best scheme in a proactive WSN over Rayleigh and Rician flat-fading channel models with path-loss. For this purpose, we describe the system model according to a pre-determined time-based process in practical sensor nodes. The present analysis also includes the effect of bandwidth and active mode duration on energy efficiency of popular modulation designs in the pass-band and Ultra-WideBand (UWB) categories. Experimental results show that among various pass-band and UWB modulation schemes, Non-Coherent M-ary Frequency Shift Keying (NC-MFSK) with sm...

  14. EMPLOYING SENSOR NETWORK TO GUIDE FIREFIGHTERS IN DANGEROUS AREA

    DEFF Research Database (Denmark)

    Koohi, Hamidreza; Nadernejad, Ehsan; Fathi, Mahmoud

    2010-01-01

    itself against possible changes. The protocol developed, will integrate the artificial potential field of the sensors with the information of the intended place of moving firefighter so that it guides the firefighter step by step through the sensor network by choosing the safest path in dangerous zones......In this paper, we intend to focus on the sensor network applications in firefighting. A distributed algorithm is developed for the sensor network to guide firefighters through a burning area. The sensor network models the danger of the area under coverage as obstacles, and has the property to adapt....... This protocol is simulated by Visual-Sense and the simulation results are available. Keyword: Firefighter, Sensor Network, Potential Field, Area’s Danger, Navigation...

  15. GAS MAIN SENSOR AND COMMUNICATIONS NETWORK SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Hagen Schempf, Ph.D.

    2003-02-27

    Automatika, Inc. was contracted by the Department of Energy (DOE) and with co-funding from the New York Gas Group (NYGAS), to develop an in-pipe natural gas prototype measurement and wireless communications system for assessing and monitoring distribution networks. A prototype system was built for low-pressure cast-iron mains and tested in a spider- and serial-network configuration in a live network in Long Island with the support of Keyspan Energy, Inc. The prototype unit combined sensors capable of monitoring pressure, flow, humidity, temperature and vibration, which were sampled and combined in data-packages in an in-pipe master-slave architecture to collect data from a distributed spider-arrangement, and in a master-repeater-slave configuration in serial or ladder-network arrangements. It was found that the system was capable of performing all data-sampling and collection as expected, yielding interesting results as to flow-dynamics and vibration-detection. Wireless in-pipe communications were shown to be feasible and valuable data was collected in order to determine how to improve on range and data-quality in the future.

  16. Sleep Control Game for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sang Hoon Lee

    2016-01-01

    Full Text Available In wireless sensor networks (WSNs, each node controls its sleep to reduce energy consumption without sacrificing message latency. In this paper we apply the game theory, which is a powerful tool that explains how each individual acts for his or her own economic benefit, to analyze the optimal sleep schedule for sensor nodes. We redefine this sleep control game as a modified version of the Prisoner’s Dilemma. In the sleep control game, each node decides whether or not it wakes up for the cycle. Payoff functions of the sleep control game consider the expected traffic volume, network conditions, and the expected packet delay. According to the payoff function, each node selects the best wake-up strategy that may minimize the energy consumption and maintain the latency performance. To investigate the performance of our algorithm, we apply the sleep control game to X-MAC, which is one of the recent WSN MAC protocols. Our detailed packet level simulations confirm that the proposed algorithm can effectively reduce the energy consumption by removing unnecessary wake-up operations without loss of the latency performance.

  17. Fast notification architecture for wireless sensor networks

    Science.gov (United States)

    Lee, Dong-Hahk

    2013-03-01

    In an emergency, since it is vital to transmit the message to the users immediately after analysing the data to prevent disaster, this article presents the deployment of a fast notification architecture for a wireless sensor network. The sensor nodes of the proposed architecture can monitor an emergency situation periodically and transmit the sensing data, immediately to the sink node. We decide on the grade of fire situation according to the decision rule using the sensing values of temperature, CO, smoke density and temperature increasing rate. On the other hand, to estimate the grade of air pollution, the sensing data, such as dust, formaldehyde, NO2, CO2, is applied to the given knowledge model. Since the sink node in the architecture has a ZigBee interface, it can transmit the alert messages in real time according to analysed results received from the host server to the terminals equipped with a SIM card-type ZigBee module. Also, the host server notifies the situation to the registered users who have cellular phone through short message service server of the cellular network. Thus, the proposed architecture can adapt an emergency situation dynamically compared to the conventional architecture using video processing. In the testbed, after generating air pollution and fire data, the terminal receives the message in less than 3 s. In the test results, this system can also be applied to buildings and public areas where many people gather together, to prevent unexpected disasters in urban settings.

  18. Cooperative Jamming for Physical Layer Security in Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Rohokale, Vandana M.; Prasad, Neeli R.; Prasad, Ramjee

    2012-01-01

    Interference is generally considered as the redundant and unwanted occurrence in wireless communication. This work proposes a novel cooperative jamming mechanism for scalable networks like Wireless Sensor Networks (WSNs) which makes use of friendly interference to confuse the eavesdropper...

  19. The ASCI Network for SC '98: Dense Wave Division Multiplexing for Distributed and Distance Computing

    Energy Technology Data Exchange (ETDEWEB)

    Adams, R.L.; Butman, W.; Martinez, L.G.; Pratt, T.J.; Vahle, M.O.

    1999-06-01

    This document highlights the DISCOM's Distance computing and communication team activities at the 1998 Supercomputing conference in Orlando, Florida. This conference is sponsored by the IEEE and ACM. Sandia National Laboratories, Lawrence Livermore National Laboratory, and Los Alamos National Laboratory have participated in this conference for ten years. For the last three years, the three laboratories have a joint booth at the conference under the DOE's ASCI, Accelerated Strategic Computing Initiatives. The DISCOM communication team uses the forum to demonstrate and focus communications and networking developments. At SC '98, DISCOM demonstrated the capabilities of Dense Wave Division Multiplexing. We exhibited an OC48 ATM encryptor. We also coordinated the other networking activities within the booth. This paper documents those accomplishments, discusses the details of their implementation, and describes how these demonstrations support overall strategies in ATM networking.

  20. A Hierarchical Sensor Network Based on Voronoi Diagram

    Institute of Scientific and Technical Information of China (English)

    SHANG Rui-qiang; ZHAO Jian-li; SUN Qiu-xia; WANG Guang-xing

    2006-01-01

    A hierarchical sensor network is proposed which places the sensing and routing capacity at different layer nodes.It thus simplifies the hardware design and reduces cost. Adopting Voronoi diagram in the partition of backbone network,a mathematical model of data aggregation based on hierarchical architecture is given. Simulation shows that the number of transmission data packages is sharply cut down in the network, thus reducing the needs in the bandwidth and energy resources and is thus well adapted to sensor networks.

  1. The use of a dense urban meteorological network to enable long term electricity consumption forecasting

    Science.gov (United States)

    Antunes de Azevedo, J.

    2015-12-01

    High air temperatures have an impact on energy consumption, since the demand for cooling fans and air conditioning increases. With current climate projections indicating a general increase in air temperatures, as well as more frequent and intense heat waves, cooling energy demand will increase with time and should therefore be considered by industry and policy makers. Cooling degree days (CDD) are a standard approach used by energy industry to estimate cooling demand. The methodology compares ambient temperatures with a base value for air temperature considered representative of the city being analysed. However, due to the Urban Heat Island effect, temperature and energy consumption will vary considerably across a city. Hence, for CDD to be estimated across an urban area, air temperature data from dense urban networks are required. This study analysed air temperature data available from a dense urban meteorological network to estimate CDD and cooling needs across Birmingham-UK for summer 2013. From the results, it was possible to identify the potential role and limitations of urban meteorological networks in forecasting electricity demand within a city for future climate scenarios.

  2. Wireless sensor and ad hoc networks under diversified network scenarios

    CERN Document Server

    Sarkar, Subir Kumar

    2012-01-01

    Due to significant advantages, including convenience, efficiency and cost-effectiveness, the implementation and use of wireless ad hoc and sensor networks have gained steep growth in recent years. This timely book presents the current state-of-the-art in these popular technologies, providing you with expert guidance for your projects in the field. You find broad-ranging coverage of important concepts and methods, definitions of key terminology, and a look at the direction of future research. Supported with nearly 150 illustrations, the book discusses a variety of critical topics, from topology

  3. Robust Forecasting for Energy Efficiency of Wireless Multimedia Sensor Networks

    Directory of Open Access Journals (Sweden)

    Dao-Wei Bi

    2007-11-01

    Full Text Available An important criterion of wireless sensor network is the energy efficiency inspecified applications. In this wireless multimedia sensor network, the observations arederived from acoustic sensors. Focused on the energy problem of target tracking, this paperproposes a robust forecasting method to enhance the energy efficiency of wirelessmultimedia sensor networks. Target motion information is acquired by acoustic sensornodes while a distributed network with honeycomb configuration is constructed. Thereby,target localization is performed by multiple sensor nodes collaboratively through acousticsignal processing. A novel method, combining autoregressive moving average (ARMAmodel and radial basis function networks (RBFNs, is exploited to perform robust targetposition forecasting during target tracking. Then sensor nodes around the target areawakened according to the forecasted target position. With committee decision of sensornodes, target localization is performed in a distributed manner and the uncertainty ofdetection is reduced. Moreover, a sensor-to-observer routing approach of the honeycombmesh network is investigated to solve the data reporting considering the residual energy ofsensor nodes. Target localization and forecasting are implemented in experiments.Meanwhile, sensor node awakening and dynamic routing are evaluated. Experimentalresults verify that energy efficiency of wireless multimedia sensor network is enhanced bythe proposed target tracking method.

  4. Resource Discovery in Activity-Based Sensor Networks

    DEFF Research Database (Denmark)

    Bucur, Doina; Bardram, Jakob

    This paper proposes a service discovery protocol for sensor networks that is specifically tailored for use in humancentered pervasive environments. It uses the high-level concept of computational activities (as logical bundles of data and resources) to give sensors in Activity-Based Sensor Networ...

  5. Analyzing the Potential of Full Duplex in 5G Ultra-Dense Small Cell Networks

    DEFF Research Database (Denmark)

    Gatnau, Marta; Berardinelli, Gilberto; Mahmood, Nurul Huda;

    2016-01-01

    Full duplex technology has become an attractive solution for future 5th Generation (5G) systems for accommodating the exponentially growing mobile traffic demand. Full duplex allows a node to transmit and receive simultaneously in the same frequency band, thus, theoretically, doubling the system......-interference cancellation are demonstrated using our own developed test bed. Secondly, a detailed evaluation of full duplex communication in 5G ultra-dense small cell networks via system level simulations is provided. The results are presented in terms of throughput and delay. Two types of full duplex are studied: when...

  6. Deep convolutional neural networks for dense non-uniform motion deblurring

    CSIR Research Space (South Africa)

    Cronje, J

    2015-11-01

    Full Text Available stream_source_info Cronje_2015_ABSTRACT.pdf.txt stream_content_type text/plain stream_size 885 Content-Encoding ISO-8859-1 stream_name Cronje_2015_ABSTRACT.pdf.txt Content-Type text/plain; charset=ISO-8859-1 Computer... Vision and Pattern Recognition Deep Convolutional Neural Networks for Dense Non- Uniform Motion Deblurring Jaco Cronje Council for Scientific and Industrial Research, Pretoria, South Africa Email: jcronje@csir.co.za Abstract The work...

  7. Green Small Cell Operation of Ultra-Dense Networks Using Device Assistance

    Directory of Open Access Journals (Sweden)

    Gilsoo Lee

    2016-12-01

    Full Text Available As higher performance is demanded in 5G networks, energy consumption in wireless networks increases along with the advances of various technologies, so enhancing energy efficiency also becomes an important goal to implement 5G wireless networks. In this paper, we study the energy efficiency maximization problem focused on finding a suitable set of turned-on small cell access points (APs. Finding the suitable on/off states of APs is challenging since the APs can be deployed by users while centralized network planning is not always possible. Therefore, when APs in small cells are randomly deployed and thus redundant in many cases, a mechanism of dynamic AP turning-on/off is required. We propose a device-assisted framework that exploits feedback messages from the user equipment (UE. To solve the problem, we apply an optimization method using belief propagation (BP on a factor graph. Then, we propose a family of online algorithms inspired by BP, called DANCE, that requires low computational complexity. We perform numerical simulations, and the extensive simulations confirm that BP enhances energy efficiency significantly. Furthermore, simple, but practical DANCE exhibits close performance to BP and also better performance than other popular existing methods. Specifically, in a small-sized network, BP enhances energy efficiency 129%. Furthermore, in ultra-dense networks, DANCE algorithms successfully achieve orders of magnitude higher energy efficiency than that of the baseline.

  8. SOUNET: Self-Organized Underwater Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Hee-won Kim

    2017-02-01

    Full Text Available In this paper, we propose an underwater wireless sensor network (UWSN named SOUNET where sensor nodes form and maintain a tree-topological network for data gathering in a self-organized manner. After network topology discovery via packet flooding, the sensor nodes consistently update their parent node to ensure the best connectivity by referring to the timevarying neighbor tables. Such a persistent and self-adaptive method leads to high network connectivity without any centralized control, even when sensor nodes are added or unexpectedly lost. Furthermore, malfunctions that frequently happen in self-organized networks such as node isolation and closed loop are resolved in a simple way. Simulation results show that SOUNET outperforms other conventional schemes in terms of network connectivity, packet delivery ratio (PDR, and energy consumption throughout the network. In addition, we performed an experiment at the Gyeongcheon Lake in Korea using commercial underwater modems to verify that SOUNET works well in a real environment.

  9. SOUNET: Self-Organized Underwater Wireless Sensor Network.

    Science.gov (United States)

    Kim, Hee-Won; Cho, Ho-Shin

    2017-02-02

    In this paper, we propose an underwater wireless sensor network (UWSN) named SOUNET where sensor nodes form and maintain a tree-topological network for data gathering in a self-organized manner. After network topology discovery via packet flooding, the sensor nodes consistently update their parent node to ensure the best connectivity by referring to the timevarying neighbor tables. Such a persistent and self-adaptive method leads to high network connectivity without any centralized control, even when sensor nodes are added or unexpectedly lost. Furthermore, malfunctions that frequently happen in self-organized networks such as node isolation and closed loop are resolved in a simple way. Simulation results show that SOUNET outperforms other conventional schemes in terms of network connectivity, packet delivery ratio (PDR), and energy consumption throughout the network. In addition, we performed an experiment at the Gyeongcheon Lake in Korea using commercial underwater modems to verify that SOUNET works well in a real environment.

  10. Wireless Sensor Network for Medical Applications

    Directory of Open Access Journals (Sweden)

    Hanady S.Ahmed

    2015-06-01

    Full Text Available This work presents a healthcare monitoring system that can be used in an intensive care room. Biological information represented by ECG signals is achieved by ECG acquisition part . AD620 Instrumentation Amplifier selected due to its low current noise. The ECG signals of patients in the intensive care room are measured through wireless nodes. A base node is connected to the nursing room computer via a USB port , and is programmed with a specific firmware. The ECG signals are transferred wirelessly to the base node using nRF24L01+ wireless module. So, the nurse staff has a real time information for each patient available in the intensive care room. A star Wireless Sensor Network is designed for collecting ECG signals . ATmega328 MCU in the Arduino Uno board used for this purpose. Internet for things used For transferring ECG signals to the remote doctor, a Virtual Privet Network is established to connect the nursing room computer and the doctor computer . So, the patients information kept secure. Although the constructed network is tested for ECG monitoring, but it can be used to monitor any other signals.

  11. Wireless Sensor Networks for Environmental Monitoring

    Science.gov (United States)

    Liang, X.; Liang, Y.; Navarro, M.; Zhong, X.; Villalba, G.; Li, Y.; Davis, T.; Erratt, N.

    2015-12-01

    Wireless sensor networks (WSNs) have gained an increasing interest in a broad range of new scientific research and applications. WSN technologies can provide high resolution for spatial and temporal data which has not been possible before, opening up new opportunities. On the other hand, WSNs, particularly outdoor WSNs in harsh environments, present great challenges for scientists and engineers in terms of the network design, deployment, operation, management, and maintenance. Since 2010, we have been working on the deployment of an outdoor multi-hop WSN testbed for hydrological/environmental monitoring in a forested hill-sloped region at the Audubon Society of Western Pennsylvania (ASWP), Pennsylvania, USA. The ASWP WSN testbed has continuously evolved and had more than 80 nodes by now. To our knowledge, the ASWP WSN testbed represents one of the first known long-term multi-hop WSN deployments in an outdoor environment. As simulation and laboratory methods are unable to capture the complexity of outdoor environments (e.g., forests, oceans, mountains, or glaciers), which significantly affect WSN operations and maintenance, experimental deployments are essential to investigate and understand WSN behaviors and performances as well as its maintenance characteristics under these harsh conditions. In this talk, based on our empirical studies with the ASWP WSN testbed, we will present our discoveries and investigations on several important aspects including WSN energy profile, node reprogramming, network management system, and testbed maintenance. We will then provide our insight into these critical aspects of outdoor WSN deployments and operations.

  12. Security Attacks and its Countermeasures in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Rajkumar,

    2014-10-01

    Full Text Available Wireless Sensor Networks have come to the forefront of the scientific community recently. Present WSNs typically communicate directly with a centralized controller or satellite. Going on the other hand, a smart WSN consists of a number of sensors spread across a geographical area; each sensor has wireless communication ability and sufficient intelligence for signal processing and networking of the data. This paper surveyed the different types of attacks, security related issues, and it’s Countermeasures with the complete comparison between Layer based Attacks in Wireless Sensor Network.

  13. Coal mine gas monitoring system based on wireless sensor network

    Institute of Scientific and Technical Information of China (English)

    WANG Jian; WANG Ru-lin; WANG Xue-min; SHEN Chuan-he

    2007-01-01

    Based on the nowadays'condition.it is urgent that the gas detection cable communication system must be replaced by the wireless communication systems.The wireless sensors distributed in the environment can achieve the intelligent gas monitoring system.Apply with multilayer data fuse to design working tactics,and import the artificial neural networks to analyze detecting result.The wireless sensors system communicates with the controI center through the optical fiber cable.All the gas sensor nodes distributed in coal mine are combined into an intelligent,flexible structure wireless network system.forming coal mine gas monitoring system based on wireless sensor network.

  14. The Use of Wireless Sensor Network for Increasing Airport Safety

    Directory of Open Access Journals (Sweden)

    Jakub Kraus

    2013-09-01

    Full Text Available This article deals with the use of wireless sensor networks for increasing safety at airports, respectively for replacing the current monitoring system to ensure safety. The article describes sensor networks and their applications to the identified processes and consideration of financial and safety benefits.

  15. Developing a Cooperative Intrusion Detection System for Wireless Sensor Networks

    Science.gov (United States)

    2010-11-01

    needs for WSNs and can be integrated into sensor network applications. The protocols must be adapted to use these frameworks. TinySec [11], ZigBee [12...conference on Embedded Networked Sensor Systems, November 2004. [12] ZigBee Alliance: ZigBee Specification. Technical Report Document 053474r06, June 2005

  16. Preliminary OFDM based acoustic communication for underwater sensor networks synchronization

    OpenAIRE

    Pallarés Valls, Oriol; Sarriá Gandul, David; Viñolo Monzoncillo, Carlos; Río Fernandez, Joaquín del; Manuel Lázaro, Antonio

    2013-01-01

    This work presents a first approach to wireless underwater sensor networks UWSN time synchronization, using OFDM (Orthogonal Frequency Division Multiplexing) acoustic communication and time reference served by a synchronization protocol. This synchronization and type of modulation allows getting a low drift clock on each sensor, on a high efficiency underwater communication network. Peer Reviewed

  17. LinkMind: Link Optimization in Swarming Mobile Sensor Networks

    DEFF Research Database (Denmark)

    Ngo, Trung Dung

    2012-01-01

    optimization of swarming mobile sensor networks. The new method is based on combination of the artificial potential force guaranteeing connectivities of the mobile sensor nodes and the max-flow min-cut theorem of graph theory ensuring optimization of the network link capacity. The developed algorithm...

  18. MAC Support for High Density Wireless Sensor Networks

    NARCIS (Netherlands)

    Taddia, C.; Meratnia, Nirvana; van Hoesel, L.F.W.; Mazzini, G.; Havinga, Paul J.M.

    Large scale and high density networks of tiny sensor nodes offer promising solutions for event detection and actuating applications. In this paper we address the effect of high density of wireless sensor network performance with a specific MAC protocol, the Lightweight Medium Access Control (LMAC).

  19. LinkMind: Link Optimization in Swarming Mobile Sensor Networks

    DEFF Research Database (Denmark)

    Ngo, Trung Dung

    2012-01-01

    A swarming mobile sensor network is comprised of a swarm of wirelessly connected mobile robots equipped with various sensors. Such a network can be applied in an uncertain environment for services such as cooperative navigation and exploration, object identification and information gathering. One...

  20. Mobile Sensor Networks for Inspection Tasks in Harsh Industrial Environments

    NARCIS (Netherlands)

    Mulder, Jacob; Wang, Xinyu; Ferwerda, Franke; Cao, Ming

    2010-01-01

    Recent advances in sensor technology have enabled the fast development of mobile sensor networks operating in various unknown and sometimes hazardous environments. In this paper, we introduce one integrative approach to design, analyze and test distributed control algorithms to coordinate a network

  1. Towards Secure and Practical MACs for Body Sensor Networks

    NARCIS (Netherlands)

    Gong, Z.; Hartel, P.H.; Nikova, S.I.; Zhu, Bo

    2009-01-01

    Wireless sensor network (WSN) commonly requires lower level security for public information gathering, whilst body sensor network (BSN) must be secured with strong authenticity to protect personal health information. First in this paper, some practical problems with the Message Authentication Codes

  2. Throughput Maximization for Wireless Multimedia Sensor Networks in Industrial Applications

    Directory of Open Access Journals (Sweden)

    M.Markco

    2014-06-01

    Full Text Available n recent years, there has been growing interests in wireless sensor networks. Wireless sensor network is an autonomous system of sensor connected by wireless devices without any fixed infrastructure support. To meet the challenge paradigms of wireless sensor networks like Energy efficiency, Delay constraints, Reliability and adaptive mechanis m the sensor nodes are enhanced with multimedia support. The Wireless multimedia sensor nodes (WMSN enable to streamline the data that will control and monitor the industrial activities within the sensing area. The adaptive sleepless protocol will address the following issues: First, this protocol mainly designed for desired packet delivery and delay probabilities while reducing the energy consumption of the network. Second, this protocol is based on demand based dynamic sleep scheduling scheme for data communication. In this packets are transmitted through the cross layer interaction. In this cross layer interaction enables to reach a maximum efficiency.

  3. Interoperability in wireless sensor networks based on IEEE 1451 standard

    OpenAIRE

    Higuera Portilla, Jorge Eduardo; Polo Cantero, José

    2012-01-01

    The syntactic and semantic interoperability is a challenge of the Wireless Sensor Networks (WSN) with smart sensors in pervasive computing environments to increase their harmonization in a wide variety of applications. This chapter contains a detailed description of interoperability in heterogeneous WSN using the IEEE 1451 standard. This work focuses on personal area networks (PAN) with smart sensors and actuators. Also, a technical, syntactic and semantic levels of interoperability based on ...

  4. Interoperability in wireless sensor networks based on IEEE 1451 standard

    OpenAIRE

    Higuera Portilla, Jorge Eduardo; Polo Cantero, José

    2012-01-01

    The syntactic and semantic interoperability is a challenge of the Wireless Sensor Networks (WSN) with smart sensors in pervasive computing environments to increase their harmonization in a wide variety of applications. This chapter contains a detailed description of interoperability in heterogeneous WSN using the IEEE 1451 standard. This work focuses on personal area networks (PAN) with smart sensors and actuators. Also, a technical, syntactic and semantic levels of interoperability based on ...

  5. Ninth International Conference on Wireless Communication and Sensor Networks

    CERN Document Server

    Tiwari, Murlidhar; Arora, Anish

    2014-01-01

    Wireless communication and sensor networks would form the backbone to create pervasive and ubiquitous environments that would have profound influence on the society and thus are important to the society. The wireless communication technologies and wireless sensor networks would encompass a wide range of domains such as HW devices such as motes, sensors and associated instrumentation, actuators, transmitters, receivers, antennas, etc., sensor network aspects such as topologies, routing algorithms, integration of heterogeneous network elements and topologies, designing RF devices and systems for energy efficiency and reliability etc. These sensor networks would provide opportunity to continuously and in a distributed manner monitor the environment and generate the necessary warnings and actions. However most of the developments have been demonstrated only in controlled and laboratory environments. So we are yet to see those powerful, ubiquitous applications for the benefit of the society. The conference and con...

  6. Bluetooth Roaming for Sensor Network System in Clinical Environment.

    Science.gov (United States)

    Kuroda, Tomohiro; Noma, Haruo; Takase, Kazuhiko; Sasaki, Shigeto; Takemura, Tadamasa

    2015-01-01

    A sensor network is key infrastructure for advancing a hospital information system (HIS). The authors proposed a method to provide roaming functionality for Bluetooth to realize a Bluetooth-based sensor network, which is suitable to connect clinical devices. The proposed method makes the average response time of a Bluetooth connection less than one second by making the master device repeat the inquiry process endlessly and modifies parameters of the inquiry process. The authors applied the developed sensor network for daily clinical activities in an university hospital, and confirmed the stabilitya and effectiveness of the sensor network. As Bluetooth becomes a quite common wireless interface for medical devices, the proposed protocol that realizes Bluetooth-based sensor network enables HIS to equip various clinical devices and, consequently, lets information and communication technologies advance clinical services.

  7. Geographic Gossip: Efficient Averaging for Sensor Networks

    CERN Document Server

    Dimakis, Alexandros G; Wainwright, Martin J

    2007-01-01

    Gossip algorithms for distributed computation are attractive due to their simplicity, distributed nature, and robustness in noisy and uncertain environments. However, using standard gossip algorithms can lead to a significant waste in energy by repeatedly recirculating redundant information. For realistic sensor network model topologies like grids and random geometric graphs, the inefficiency of gossip schemes is related to the slow mixing times of random walks on the communication graph. We propose and analyze an alternative gossiping scheme that exploits geographic information. By utilizing geographic routing combined with a simple resampling method, we demonstrate substantial gains over previously proposed gossip protocols. For regular graphs such as the ring or grid, our algorithm improves standard gossip by factors of $n$ and $\\sqrt{n}$ respectively. For the more challenging case of random geometric graphs, our algorithm computes the true average to accuracy $\\epsilon$ using $O(\\frac{n^{1.5}}{\\sqrt{\\log ...

  8. Wildfire safety with wireless sensor networks

    Directory of Open Access Journals (Sweden)

    Andrey Somov

    2011-11-01

    Full Text Available Nowadays, the Wireless Sensor Network (WSN paradigm is extensively used for the environmental monitoring including wildfires. Like other disasters, this phenomenon, if not detected early, may have grave consequences, e.g. a significant pecuniary loss, or even lead to human victims. This paper surveys the approaches to early wildfire detection using WSN facilities with a special focus on real deployments and hardware prototypes. In our work we propose not merely a description, but a classification of the fire detection methods which are divided into three groups: gas sensing, sensing of environmental parameters, and video monitoring. Then the methods are comparatively analyzed from the viewpoints of the cost, power consumption, and implementation complexity. Finally, we summarize our vision of the prospects of resolving the wildfire detection problem using WSNs.

  9. GAS MAIN SENSOR AND COMMUNICATIONS NETWORK SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Hagen Schempf

    2004-09-30

    Automatika, Inc. was contracted by the Department of Energy (DOE) and with co-funding from the New York Gas Group (NYGAS), to develop an in-pipe natural gas prototype measurement and wireless communications system for assessing and monitoring distribution networks. In Phase II of this three-phase program, an improved prototype system was built for low-pressure cast-iron and high-pressure steel (including a no-blow installation system) mains and tested in a serial-network configuration in a live network in Long Island with the support of Keyspan Energy, Inc. The experiment was carried out in several open-hole excavations over a multi-day period. The prototype units (3 total) combined sensors capable of monitoring pressure, flow, humidity, temperature and vibration, which were sampled and combined in data-packages in an in-pipe master-repeater-slave configuration in serial or ladder-network arrangements. It was verified that the system was capable of performing all data-sampling, data-storage and collection as expected, yielding interesting results as to flow-dynamics and vibration-detection. Wireless in-pipe communications were shown to be feasible and the system was demonstrated to run off in-ground battery- and above-ground solar power. The remote datalogger access and storage-card features were demonstrated and used to log and post-process system data. Real-time data-display on an updated Phase-I GUI was used for in-field demonstration and troubleshooting.

  10. Energy Aware Clustering Algorithms for Wireless Sensor Networks

    Science.gov (United States)

    Rakhshan, Noushin; Rafsanjani, Marjan Kuchaki; Liu, Chenglian

    2011-09-01

    The sensor nodes deployed in wireless sensor networks (WSNs) are extremely power constrained, so maximizing the lifetime of the entire networks is mainly considered in the design. In wireless sensor networks, hierarchical network structures have the advantage of providing scalable and energy efficient solutions. In this paper, we investigate different clustering algorithms for WSNs and also compare these clustering algorithms based on metrics such as clustering distribution, cluster's load balancing, Cluster Head's (CH) selection strategy, CH's role rotation, node mobility, clusters overlapping, intra-cluster communications, reliability, security and location awareness.

  11. NEAR OPTIMAL CLUSTER-HEAD SELECTION FOR WIRELESS SENSOR NETWORKS

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Clustering in wireless sensor networks is an effective way to save energy and reuse bandwidth. To our best knowledge, most of the clustering protocols proposed in literature are of a dynamic type, where cluster heads are selected in each period, followed by cluster formation. In this paper, a new static type clustering method called Hausdorff clustering, which is based on the location of sensor nodes as well as communication efficiency and network connectivity, is proposed. The cluster head, however,is rotated within the cluster by a fuzzy logic algorithm that optimizes the network lifetime. Simulation results show that this approach can significantly increase the lifetime of the sensor network.

  12. Network Lifetime Extension Based On Network Coding Technique In Underwater Acoustic Sensor Networks

    Directory of Open Access Journals (Sweden)

    Padmavathy.T.V

    2012-06-01

    Full Text Available Underwater acoustic sensor networks (UWASNs are playing a lot of interest in ocean applications, such as ocean pollution monitoring, ocean animal surveillance, oceanographic data collection, assisted- navigation, and offshore exploration, UWASN is composed of underwater sensors that engage sound to transmit information collected in the ocean. The reason to utilize sound is that radio frequency (RF signals used by terrestrial sensor networks (TWSNs can merely transmit a few meters in the water. Unfortunately, the efficiency of UWASNs is inferior to that of the terrestrial sensor networks (TWSNs. Some of the challenges in under water communication are propagation delay, high bit error rate and limited bandwidth. Our aim is to minimize the power consumption and to improve the reliability of data transmission by finding the optimum number of clusters based on energy consumption.

  13. Complex patterns arise through spontaneous symmetry breaking in dense homogeneous networks of neural oscillators

    Science.gov (United States)

    Singh, Rajeev; Menon, Shakti N.; Sinha, Sitabhra

    2016-02-01

    There has been much interest in understanding collective dynamics in networks of brain regions due to their role in behavior and cognitive function. Here we show that a simple, homogeneous system of densely connected oscillators, representing the aggregate activity of local brain regions, can exhibit a rich variety of dynamical patterns emerging via spontaneous breaking of permutation or translational symmetries. Upon removing just a few connections, we observe a striking departure from the mean-field limit in terms of the collective dynamics, which implies that the sparsity of these networks may have very important consequences. Our results suggest that the origins of some of the complicated activity patterns seen in the brain may be understood even with simple connection topologies.

  14. Multiconnectivity for Mobility Robustness in Standalone 5G Ultra Dense Networks with Intrafrequency Cloud Radio Access

    Directory of Open Access Journals (Sweden)

    Fasil B. Tesema

    2017-01-01

    Full Text Available Capacity and ultra-reliable communication are some of the requirements for 5th generation (5G networks. One of the candidate technologies to satisfy capacity requirement is standalone Ultra Dense Network (UDN. However, UDNs are characterized by fast change of received signal strength that creates mobility challenges in terms of increased handovers and connection failures. In this paper, a low layer multiconnectivity scheme is presented for standalone UDN aiming at ultra-reliable communication that is free of interruptions from handover procedures and connection failures. Furthermore, the problem in managing of the set of serving cells, that are involved in multiconnectivity for each user, is formulated. By using numerical method, feasible scheme for management of the set of serving cells is derived. Performance of the proposed multiconnectivity scheme is evaluated and compared against single connectivity. It is shown that the proposed multiconnectivity scheme outperforms single connectivity considerably in terms of connection failures and cell-edge throughput.

  15. Vehicular Ad Hoc and Sensor Networks; Principles and Challenges

    CERN Document Server

    Piran, Mohammad Jalil; Babu, G Praveen

    2011-01-01

    The rapid increase of vehicular traffic and congestion on the highways began hampering the safe and efficient movement of traffic. Consequently, year by year, we see the ascending rate of car accidents and casualties in most of the countries. Therefore, exploiting the new technologies, e.g. wireless sensor networks, is required as a solution of reduction of these saddening and reprehensible statistics. This has motivated us to propose a novel and comprehensive system to utilize Wireless Sensor Networks for vehicular networks. We coin the vehicular network employing wireless Sensor networks as Vehicular Ad Hoc and Sensor Network, or VASNET in short. The proposed VASNET is particularly for highway traffic .VASNET is a self-organizing Ad Hoc and sensor network comprised of a large number of sensor nodes. In VASNET there are two kinds of sensor nodes, some are embedded on the vehicles-vehicular nodes- and others are deployed in predetermined distances besides the highway road, known as Road Side Sensor nodes (RSS...

  16. Flood avalanches in a semiarid basin with a dense reservoir network

    CERN Document Server

    Peter, Samuel J; Araújo, N A M; Herrmann, H J

    2014-01-01

    This study investigates flood avalanches in a dense reservoir network in the semiarid north-eastern Brazil. The population living in this area strongly depends on the availability of the water from this network. Water is stored during intense wet-season rainfall events and evaporates from the reservoir surface during the dry season. These seasonal changes are the driving forces behind the water dynamics in the network. The reservoir network and its connectivity properties during flood avalanches are investigated with a model called ResNetM, which simulates each reservoir explicitly. It runs on the basis of daily calculated water balances for each reservoir. A spilling reservoir contributes with water to the reservoir downstream, which can trigger avalanches affecting, in some cases, large fractions of the network. The main focus is on the study of the relation between the total amount of water stored and the largest observable cluster of connected reservoirs that overspill in the same day. It is shown that th...

  17. IJA: An Efficient Algorithm for Query Processing in Sensor Networks

    Science.gov (United States)

    Lee, Hyun Chang; Lee, Young Jae; Lim, Ji Hyang; Kim, Dong Hwa

    2011-01-01

    One of main features in sensor networks is the function that processes real time state information after gathering needed data from many domains. The component technologies consisting of each node called a sensor node that are including physical sensors, processors, actuators and power have advanced significantly over the last decade. Thanks to the advanced technology, over time sensor networks have been adopted in an all-round industry sensing physical phenomenon. However, sensor nodes in sensor networks are considerably constrained because with their energy and memory resources they have a very limited ability to process any information compared to conventional computer systems. Thus query processing over the nodes should be constrained because of their limitations. Due to the problems, the join operations in sensor networks are typically processed in a distributed manner over a set of nodes and have been studied. By way of example while simple queries, such as select and aggregate queries, in sensor networks have been addressed in the literature, the processing of join queries in sensor networks remains to be investigated. Therefore, in this paper, we propose and describe an Incremental Join Algorithm (IJA) in Sensor Networks to reduce the overhead caused by moving a join pair to the final join node or to minimize the communication cost that is the main consumer of the battery when processing the distributed queries in sensor networks environments. At the same time, the simulation result shows that the proposed IJA algorithm significantly reduces the number of bytes to be moved to join nodes compared to the popular synopsis join algorithm. PMID:22319375

  18. IJA: An Efficient Algorithm for Query Processing in Sensor Networks

    Directory of Open Access Journals (Sweden)

    Dong Hwa Kim

    2011-01-01

    Full Text Available One of main features in sensor networks is the function that processes real time state information after gathering needed data from many domains. The component technologies consisting of each node called a sensor node that are including physical sensors, processors, actuators and power have advanced significantly over the last decade. Thanks to the advanced technology, over time sensor networks have been adopted in an all-round industry sensing physical phenomenon. However, sensor nodes in sensor networks are considerably constrained because with their energy and memory resources they have a very limited ability to process any information compared to conventional computer systems. Thus query processing over the nodes should be constrained because of their limitations. Due to the problems, the join operations in sensor networks are typically processed in a distributed manner over a set of nodes and have been studied. By way of example while simple queries, such as select and aggregate queries, in sensor networks have been addressed in the literature, the processing of join queries in sensor networks remains to be investigated. Therefore, in this paper, we propose and describe an Incremental Join Algorithm (IJA in Sensor Networks to reduce the overhead caused by moving a join pair to the final join node or to minimize the communication cost that is the main consumer of the battery when processing the distributed queries in sensor networks environments. At the same time, the simulation result shows that the proposed IJA algorithm significantly reduces the number of bytes to be moved to join nodes compared to the popular synopsis join algorithm.

  19. Performance Evaluation and Optimization of Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Dr Jayant Dubey

    2013-06-01

    Full Text Available A wireless sensor network (WSN is an ad-hoc network composed of small sensor nodes deployed in large numbers to sense the physical world. Wireless sensor networks have very broad application prospects including both military and civilian usage. They include surveillance, tracking at critical facilities, or monitoring animal habitats. Sensor networks have the potential to radically change the way people observe and interact with their environment. With current wireless sensor network technology, people will gain advanced knowledge of physical and social systems, and the advent of a ubiquitous sensing era is coming. In-network processing or data aggregation is an essential function of WSNs to collect raw sensory data and get aggregated statistics about the measured environment, and help queries capture the major feature or changes of the measured systems. As more and more applications of WSNs collect sensitive measurements of people’s everyday life, privacy and security concerns draw more and more attention. If privacy of sensory content is not preserved, it is not feasible to deploy the WSNs for information collection. On the other hand, if integrity of the collected sensory information is not protected, no queries or users can trust and/or use the collected information. Hence, two important issues should be addressed before wireless sensor network systems can realize their promise in civilian applications: (1 protect data privacy, so the deployment of the wireless sensor network systems is feasible; (2 enforce integrity, so users can trust the collected or aggregated information.

  20. The Effect of Physical Topology on Wireless Sensor Network Lifetime

    OpenAIRE

    Debdhanit Yupho; Joseph Kabara

    2007-01-01

    Wireless sensor networks must measure environmental conditions, such as temperature, over extended periods and therefore require a long system lifetime. The design of long lifetime networks in turn requires efficient sensor node circuits, algorithms, and protocols. Protocols such as GSP (Gossip-based Sleep Protocol) have been shown to mitigate energy consumption in idle listening and receiving, by turning off the receiver circuit. However, previous studies of network lifetime have been based ...

  1. Multihop Routing In Self-Organizing Wireless Sensor Networks

    OpenAIRE

    Rajashree V. Biradar; Sawant, S. R.; R. R. Mudholkar; V. C. Patil

    2011-01-01

    Wireless sensor networks have emerged in the past decade as a result of recent advances in microelectronic system fabrication, wireless communications, integrated circuit technologies, microprocessor hardware and nano-technology, progress in ad-hoc networking routing protocols, distributed signal processing, pervasive computing and embedded systems. As routing protocols are application specific, recent advances in wireless sensor networks have led to many new protocols specifically designed f...

  2. Energy Monitoring and Management Mechanism for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Papadakis Andreas

    2016-01-01

    Full Text Available In this work we discuss a mechanism for the monitoring and management of energy consumption in Wireless Sensor Networks. We consider that the Wireless Sensor Network consists of nodes that operate individually and collaborate with each other. After briefly discussing the typical network topologies and associating with the expected communications needs, we describe a conceptual framework for monitoring and managing the energy consumption on per process basis.

  3. Health monitoring of offshore structures using wireless sensor network: experimental investigations

    Science.gov (United States)

    Chandrasekaran, Srinivasan; Chitambaram, Thailammai

    2016-04-01

    This paper presents a detailed methodology of deploying wireless sensor network in offshore structures for structural health monitoring (SHM). Traditional SHM is carried out by visual inspections and wired systems, which are complicated and requires larger installation space to deploy while decommissioning is a tedious process. Wireless sensor networks can enhance the art of health monitoring with deployment of scalable and dense sensor network, which consumes lesser space and lower power consumption. Proposed methodology is mainly focused to determine the status of serviceability of large floating platforms under environmental loads using wireless sensors. Data acquired by the servers will analyze the data for their exceedance with respect to the threshold values. On failure, SHM architecture will trigger an alarm or an early warning in the form of alert messages to alert the engineer-in-charge on board; emergency response plans can then be subsequently activated, which shall minimize the risk involved apart from mitigating economic losses occurring from the accidents. In the present study, wired and wireless sensors are installed in the experimental model and the structural response, acquired is compared. The wireless system comprises of Raspberry pi board, which is programmed to transmit the acquired data to the server using Wi-Fi adapter. Data is then hosted in the webpage for further post-processing, as desired.

  4. Enhancing Sensor Network Data Quality via Collaborated Circuit and Network Operations

    Directory of Open Access Journals (Sweden)

    Lucas Vespa

    2013-04-01

    Full Text Available In many applications, the quality of data gathered by sensor networks is directly related to the signal-to-noise ratio (SNR of the sensor data being transmitted in the networks. Different from the SNR that is often used in measuring the quality of communication links, the SNR used in this work measures how accurately the data in the network packets represent the physical parameters being sensed. Hence, the signal here refers to the physical parameters that are being monitored by sensor networks; the noise is due to environmental interference and circuit noises at sensor nodes, and packet loss during network transmission. While issues affecting SNR at sensor nodes have been intensively investigated, the impact of network packet loss on data SNR has not attracted significant attention in sensor network design. This paper investigates the impact of packet loss on sensor network data SNR and shows that data SNR is dramatically affected by network packet loss. A data quality metric, based on data SNR, is developed and a cross-layer adaptive scheme is presented to minimize data quality degradation in congested sensor networks. The proposed scheme consists of adaptive downsampling and bit truncation at sensor nodes and intelligent traffic management techniques at the network level. Simulation results are presented to demonstrate the validity and effectiveness of the proposed techniques.

  5. Dynamic Session-Key Generation for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Chen Chin-Ling

    2008-01-01

    Full Text Available Abstract Recently, wireless sensor networks have been used extensively in different domains. For example, if the wireless sensor node of a wireless sensor network is distributed in an insecure area, a secret key must be used to protect the transmission between the sensor nodes. Most of the existing methods consist of preselecting keys from a key pool and forming a key chain. Then, the sensor nodes make use of the key chain to encrypt the data. However, while the secret key is being transmitted, it can easily be exposed during transmission. We propose a dynamic key management protocol, which can improve the security of the key juxtaposed to existing methods. Additionally, the dynamic update of the key can lower the probability of the key to being guessed correctly. In addition, with the new protocol, attacks on the wireless sensor network can be avoided.

  6. A Novel Mobile Sink Nodes Protocol for Grid Sensor Networks

    Directory of Open Access Journals (Sweden)

    Mei-Wen Huang

    2012-09-01

    Full Text Available The traditional wireless sensor networks (WSNs fixed the sink node in a certain place has a serious hotspot problem. The sensors closer to the sink node usually required forwarding a large amount of traffic for sensors farther from the sink node. Hotspot problem causes the nodes near the hotspot sensor node consuming much more energy than the other nodes, which seriously shortens the lifetime of the sensor networks. In the paper, it is proposed a dual mobile sink nodes protocol (DMSP which combines the balance traffic strategy in the WSNs to extend the lifetime of the sensor networks. The simulation results show that the proposed DMSP can efficiently prolong the lifetime of the WSNs.

  7. Energy-balanced multiple-sensor collaborative scheduling for maneuvering target tracking in wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    An energy-balanced multiple-sensor collaborative scheduling is proposed for maneuvering target tracking in wireless sensor networks (WSNs). According to the position of the maneuvering target, some sensor nodes in WSNs are awakened to form a sensor cluster for target tracking collaboratively. In the cluster, the cluster head node is selected to implement tracking task with changed sampling interval. The distributed interactive multiple model (IMM) filter is employed to estimate the target state. The estimat...

  8. MASM: a market architecture for sensor management in distributed sensor networks

    Science.gov (United States)

    Viswanath, Avasarala; Mullen, Tracy; Hall, David; Garga, Amulya

    2005-03-01

    Rapid developments in sensor technology and its applications have energized research efforts towards devising a firm theoretical foundation for sensor management. Ubiquitous sensing, wide bandwidth communications and distributed processing provide both opportunities and challenges for sensor and process control and optimization. Traditional optimization techniques do not have the ability to simultaneously consider the wildly non-commensurate measures involved in sensor management in a single optimization routine. Market-oriented programming provides a valuable and principled paradigm to designing systems to solve this dynamic and distributed resource allocation problem. We have modeled the sensor management scenario as a competitive market, wherein the sensor manager holds a combinatorial auction to sell the various items produced by the sensors and the communication channels. However, standard auction mechanisms have been found not to be directly applicable to the sensor management domain. For this purpose, we have developed a specialized market architecture MASM (Market architecture for Sensor Management). In MASM, the mission manager is responsible for deciding task allocations to the consumers and their corresponding budgets and the sensor manager is responsible for resource allocation to the various consumers. In addition to having a modified combinatorial winner determination algorithm, MASM has specialized sensor network modules that address commensurability issues between consumers and producers in the sensor network domain. A preliminary multi-sensor, multi-target simulation environment has been implemented to test the performance of the proposed system. MASM outperformed the information theoretic sensor manager in meeting the mission objectives in the simulation experiments.

  9. Free space optical sensor network for fixed infrastructure sensing

    Science.gov (United States)

    Agrawal, Navik; Milner, Stuart D.; Davis, Christopher C.

    2009-08-01

    Free space optical (FSO) links for indoor sensor networks can provide data rates that can range from bits/s to hundreds of Mb/s. In addition, they offer physical security, and in contrast with omnidirectional RF networks, they avoid interference with other electronic systems. These features are advantageous for communication over short distances in fixed infrastructure sensor networks. In this paper the system architecture for a fixed infrastructure FSO sensor network is presented. The system includes a network of small, low power (mW), sensor systems, or "motes," that transmit data optically to a central "cluster head," which controls the network traffic of all the motes and can aggregate the sensor information. The cluster head is designed with multiple vertical cavity surface emitting lasers oriented in different directions and controlled to diverge at 12º in order to provide signal coverage over a wide field of view. Both the cluster head and motes form a local area network. Our system design focuses on low-power wireless motes that can maintain successful communication over distances up to a few meters without having to use stringent optical alignment techniques, and our network design focuses on controlling mote sleep cycles for energy efficiency. This paper presents the design as well as the experimental link and optical communications performance of a prototype FSO-based sensor network.

  10. A Framework for Secure and Survivable Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Mi Chaw Mon THEIN

    2009-01-01

    Full Text Available Wireless sensor networks increasingly become viable solutions tomany challenging problems and will successively be deployed in many areas inthe future. A wireless sensor network (WSN is vulnerable to security attacksdue to the insecure communication channels, limited computational andcommunication capabilities and unattended nature of sensor node devices,limited energy resources and memory. Security and survivability of thesesystems are receiving increasing attention, particularly critical infrastructureprotection. So we need to design a framework that provide both security andsurvivability for WSNs. To meet this goals, we propose a framework for secureand survivable WSNs and we present a key management scheme as a case studyto prevent the sensor networks being compromised by an adversary. This paperalso considers survivability strategies for the sensor network against a variety ofthreats that can lead to the failure of the base station, which represents a centralpoint of failure.

  11. An Efficient Key Management Protocol for Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    ZENG Qingguang; CUI Yanling; LUO Juan

    2006-01-01

    Key management is a fundamental security service in wireless sensor networks. The communication security problems for these networks are exacerbated by the limited power and energy of the sensor devices. In this paper, we describe the design and implementation of an efficient key management scheme based on low energy adaptive clustering hierarchy(LEACH) for wireless sensor networks. The design of the protocol is motivated by the observation that many sensor nodes in the network play different roles. The paper presents different keys are set to the sensors for meeting different transmitting messages and variable security requirements. Simulation results show that our key management protocol based-on LEACH can achieve better performance. The energy consumption overhead introduced is remarkably low compared with the original Kerberos schemes.

  12. Optimal Sensor Networks Scheduling in Identification of Distributed Parameter Systems

    CERN Document Server

    Patan, Maciej

    2012-01-01

    Sensor networks have recently come into prominence because they hold the potential to revolutionize a wide spectrum of both civilian and military applications. An ingenious characteristic of sensor networks is the distributed nature of data acquisition. Therefore they seem to be ideally prepared for the task of monitoring processes with spatio-temporal dynamics which constitute one of most general and important classes of systems in modelling of the real-world phenomena. It is clear that careful deployment and activation of sensor nodes are critical for collecting the most valuable information from the observed environment. Optimal Sensor Network Scheduling in Identification of Distributed Parameter Systems discusses the characteristic features of the sensor scheduling problem, analyzes classical and recent approaches, and proposes a wide range of original solutions, especially dedicated for networks with mobile and scanning nodes. Both researchers and practitioners will find the case studies, the proposed al...

  13. Secured Greedy Perimeter Stateless Routing for Wireless Sensor Networks

    CERN Document Server

    Samundiswary, P; Dananjayan, P

    2010-01-01

    Wireless sensor networks are collections of large number of sensor nodes. The sensor nodes are featured with limited energy, computation and transmission power. Each node in the network coordinates with every other node in forwarding their packets to reach the destination. Since these nodes operate in a physically insecure environment; they are vulnerable to different types of attacks such as selective forwarding and sinkhole. These attacks can inject malicious packets by compromising the node. Geographical routing protocols of wireless sensor networks have been developed without considering the security aspects against these attacks. In this paper, a secure routing protocol named secured greedy perimeter stateless routing protocol (S-GPSR) is proposed for mobile sensor networks by incorporating trust based mechanism in the existing greedy perimeter stateless routing protocol (GPSR). Simulation results prove that S-GPSR outperforms the GPSR by reducing the overhead and improving the delivery ratio of the netw...

  14. Radio Frequency Energy Harvesting for Long Lifetime Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Han, Bo; Nielsen, Rasmus Hjorth; Prasad, Ramjee

    2014-01-01

    In wireless sensor networks energy scarcity is a major concern on energy consumption, and by properly designing on the node network architecture or selecting efficient protocols of the networks, the maximum energy can be reduced significantly thereby increasing the network lifetime. However......, in most of the cases, the sensor nodes are either powered by non-replaceable batteries, or there will be a considerable replacement cost. Thus a self-rechargeable sensor node design is necessary: the sensor node should be able to harvest energy from the environment. Among the existing techniques...... loss of the RF signals. On the node level, a virtual floating gate based CMOS biasing is used for the energy conversion circuit. With the proposed technique, the sensor node is able to harvest the energy from base station up to 30 meters....

  15. Position paper: cognitive radio networking for multiple sensor network interoperability in mines

    CSIR Research Space (South Africa)

    Kagize, BM

    2008-01-01

    Full Text Available This paper proposes the use of cognitive radio technology for multiple wireless sensor technologies in mines. The work is motivated by the lack of flexible and scalable sensor networks in mines. The proposed architecture uses cognitive radio...

  16. Distance Based Fault detection in wireless sensor network

    Directory of Open Access Journals (Sweden)

    Ayasha Siddiqua

    2013-05-01

    Full Text Available Wireless Sensor Network (WSNs have become a new information collection and monitoring solution for a variety of application. In WSN, sensor nodes have strong hardware and software restrictionin terms of processing power, memory capability, power supply and communication throughput. Due to these restrictions, fault may occur in sensor. This paper presents a distance based fault detection (DBFDmethod for wireless sensor network using the average of confidence level and sensed data of sensor node. Simulation results show that sensor nodes with permanent faults and without fault which was judged as faulty are identified with high accuracy for a wide range of fault rate, and keep false alarm rate for different levels of sensor fault model and also correct nodes are identified by accuracy.

  17. Distributed Network Control for Mobile Multi-Modal Wireless Sensor Networks

    Science.gov (United States)

    2010-08-19

    Distributed Network Control for Mobile Multi-Modal Wireless Sensor Networks Doina Bein , Yicheng Wen, Shashi Phoha1, Bharat B. Madan, and Asok Ray The...Journal of High Perfor- mance Computing Applications, Special Issue on Sensor Networks 16 (3) (2002) 235–241. [30] Y. Wen, D. Bein , S. Phoha

  18. Robust Networking Architecture and Secure Communication Scheme for Heterogeneous Wireless Sensor Networks

    Science.gov (United States)

    McNeal, McKenzie, III.

    2012-01-01

    Current networking architectures and communication protocols used for Wireless Sensor Networks (WSNs) have been designed to be energy efficient, low latency, and long network lifetime. One major issue that must be addressed is the security in data communication. Due to the limited capabilities of low cost and small sized sensor nodes, designing…

  19. Robust Networking Architecture and Secure Communication Scheme for Heterogeneous Wireless Sensor Networks

    Science.gov (United States)

    McNeal, McKenzie, III.

    2012-01-01

    Current networking architectures and communication protocols used for Wireless Sensor Networks (WSNs) have been designed to be energy efficient, low latency, and long network lifetime. One major issue that must be addressed is the security in data communication. Due to the limited capabilities of low cost and small sized sensor nodes, designing…

  20. Quality of Service in Wireless Sensor Networks (QOS in WSN)

    Science.gov (United States)

    Zolhavarieh, Seyedjamal; Barati, Molood

    2013-03-01

    In this paper, we discuss about concept of Quality of Service (QoS) in Wireless Sensor Networks (WSN) and different methods to improve data security network. The most useful methods for network traffic control are Differentiated Services (DS), Integrated Services, Multi-Protocol Labeled Switching (MPLS), Resource Reservation Protocol (RSVP) and Traffic Engineering. Quality of Service is responsible for data transfer between different parts of the network and it guarantees some series of transport properties on the network [14].

  1. A Deployment of Fine-Grained Sensor Network and Empirical Analysis of Urban Temperature

    Directory of Open Access Journals (Sweden)

    Yoshito Tobe

    2010-03-01

    Full Text Available Temperature in an urban area exhibits a complicated pattern due to complexity of infrastructure. Despite geographical proximity, structures of a group of buildings and streets affect changes in temperature. To investigate the pattern of fine-grained distribution of temperature, we installed a densely distributed sensor network called UScan. In this paper, we describe the system architecture of UScan as well as experience learned from installing 200 sensors in downtown Tokyo. The field experiment of UScan system operated for two months to collect long-term urban temperature data. To analyze the collected data in an efficient manner, we propose a lightweight clustering methodology to study the correlation between the pattern of temperature and various environmental factors including the amount of sunshine, the width of streets, and the existence of trees. The analysis reveals meaningful results and asserts the necessity of fine-grained deployment of sensors in an urban area.

  2. A deployment of fine-grained sensor network and empirical analysis of urban temperature.

    Science.gov (United States)

    Thepvilojanapong, Niwat; Ono, Takahiro; Tobe, Yoshito

    2010-01-01

    Temperature in an urban area exhibits a complicated pattern due to complexity of infrastructure. Despite geographical proximity, structures of a group of buildings and streets affect changes in temperature. To investigate the pattern of fine-grained distribution of temperature, we installed a densely distributed sensor network called UScan. In this paper, we describe the system architecture of UScan as well as experience learned from installing 200 sensors in downtown Tokyo. The field experiment of UScan system operated for two months to collect long-term urban temperature data. To analyze the collected data in an efficient manner, we propose a lightweight clustering methodology to study the correlation between the pattern of temperature and various environmental factors including the amount of sunshine, the width of streets, and the existence of trees. The analysis reveals meaningful results and asserts the necessity of fine-grained deployment of sensors in an urban area.

  3. Delaunay Triangulation as a New Coverage Measurement Method in Wireless Sensor Network

    Science.gov (United States)

    Chizari, Hassan; Hosseini, Majid; Poston, Timothy; Razak, Shukor Abd; Abdullah, Abdul Hanan

    2011-01-01

    Sensing and communication coverage are among the most important trade-offs in Wireless Sensor Network (WSN) design. A minimum bound of sensing coverage is vital in scheduling, target tracking and redeployment phases, as well as providing communication coverage. Some methods measure the coverage as a percentage value, but detailed information has been missing. Two scenarios with equal coverage percentage may not have the same Quality of Coverage (QoC). In this paper, we propose a new coverage measurement method using Delaunay Triangulation (DT). This can provide the value for all coverage measurement tools. Moreover, it categorizes sensors as ‘fat’, ‘healthy’ or ‘thin’ to show the dense, optimal and scattered areas. It can also yield the largest empty area of sensors in the field. Simulation results show that the proposed DT method can achieve accurate coverage information, and provides many tools to compare QoC between different scenarios. PMID:22163792

  4. 1-Bit Compressive Data Gathering for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Jiping Xiong

    2014-01-01

    Full Text Available Compressive sensing (CS has been widely used in wireless sensor networks for the purpose of reducing the data gathering communication overhead in recent years. In this paper, we firstly apply 1-bit compressive sensing to wireless sensor networks to further reduce the communication overhead that each sensor needs to send. Furthermore, we propose a novel blind 1-bit CS reconstruction algorithm which outperforms other state-of-the-art blind 1-bit CS reconstruction algorithms under the settings of WSN. Experimental results on real sensor datasets demonstrate the efficiency of our method.

  5. Virtual View Image over Wireless Visual Sensor Network

    Directory of Open Access Journals (Sweden)

    Gamantyo Hendrantoro

    2011-12-01

    Full Text Available In general, visual sensors are applied to build virtual view images. When number of visual sensors increases then quantity and quality of the information improves. However, the view images generation is a challenging task in Wireless Visual Sensor Network environment due to energy restriction, computation complexity, and bandwidth limitation. Hence this paper presents a new method of virtual view images generation from selected cameras on Wireless Visual Sensor Network. The aim of the paper is to meet bandwidth and energy limitations without reducing information quality. The experiment results showed that this method could minimize number of transmitted imageries with sufficient information.

  6. Assessing the detection capability of a dense infrasound network in the southern Korean Peninsula

    Science.gov (United States)

    Che, Il-Young; Le Pichon, Alexis; Kim, Kwangsu; Shin, In-Cheol

    2017-08-01

    The Korea Infrasound Network (KIN) is a dense seismoacoustic array network consisting of eight small-aperture arrays with an average interarray spacing of ˜100 km. The processing of the KIN historical recordings over 10 yr in the 0.05-5 Hz frequency band shows that the dominant sources of signals are microbaroms and human activities. The number of detections correlates well with the seasonal and daily variability of the stratospheric wind dynamics. The quantification of the spatiotemporal variability of the KIN detection performance is simulated using a frequency-dependent semi-empirical propagation modelling technique. The average detection thresholds predicted for the region of interest by using both the KIN arrays and the International Monitoring System (IMS) infrasound station network at a given frequency of 1.6 Hz are estimated to be 5.6 and 10.0 Pa for two- and three-station coverage, respectively, which was about three times lower than the thresholds predicted by using only the IMS stations. The network performance is significantly enhanced from May to August, with detection thresholds being one order of magnitude lower than the rest of the year due to prevailing steady stratospheric winds. To validate the simulations, the amplitudes of ground-truth repeated surface mining explosions at an open-pit limestone mine were measured over a 19-month period. Focusing on the spatiotemporal variability of the stratospheric winds which control to first order where infrasound signals are expected to be detected, the predicted detectable signal amplitude at the mine and the detection capability at one KIN array located at a distance of 175 km are found to be in good agreement with the observations from the measurement campaign. The detection threshold in summer is ˜2 Pa and increases up to ˜300 Pa in winter. Compared with the low and stable thresholds in summer, the high temporal variability of the KIN performance is well predicted throughout the year. Simulations

  7. Sensing Models and Sensor Network Architectures for Transport Infrastructure Monitoring in Smart Cities

    Science.gov (United States)

    Simonis, Ingo

    2015-04-01

    Transport infrastructure monitoring and analysis is one of the focus areas in the context of smart cities. With the growing number of people moving into densely populated urban metro areas, precise tracking of moving people and goods is the basis for profound decision-making and future planning. With the goal of defining optimal extensions and modifications to existing transport infrastructures, multi-modal transport has to be monitored and analysed. This process is performed on the basis of sensor networks that combine a variety of sensor models, types, and deployments within the area of interest. Multi-generation networks, consisting of a number of sensor types and versions, are causing further challenges for the integration and processing of sensor observations. These challenges are not getting any smaller with the development of the Internet of Things, which brings promising opportunities, but is currently stuck in a type of protocol war between big industry players from both the hardware and network infrastructure domain. In this paper, we will highlight how the OGC suite of standards, with the Sensor Web standards developed by the Sensor Web Enablement Initiative together with the latest developments by the Sensor Web for Internet of Things community can be applied to the monitoring and improvement of transport infrastructures. Sensor Web standards have been applied in the past to pure technical domains, but need to be broadened now in order to meet new challenges. Only cross domain approaches will allow to develop satisfying transport infrastructure approaches that take into account requirements coming form a variety of sectors such as tourism, administration, transport industry, emergency services, or private people. The goal is the development of interoperable components that can be easily integrated within data infrastructures and follow well defined information models to allow robust processing.

  8. Burstiness-Aware Congestion Control Protocol for Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    Liang Lulu; Gao Deyun; Qin Yajuan; Zhang Hongke

    2011-01-01

    In monitoring Wireless Sensor Networks (WSNs),the traffic usually has bursty characteristics when an event occurs.Transient congestion would increase delay and packet loss rate severely,which greatly reduces network performance.To solve this problem,we propose a Burstiness-aware Congestion.Control Protocol (BCCP) for wireless sensor networks.In BCCP,the backoff delay is adopted as a congestion indication.Normally,sensor nodes work on contention-based MAC protocol (such as CSMA/CA).However,when congestion occurs,localized TDMA instead of CSMA/CA is embedded into the nodes around the congestion area.Thus,the congestion nodes only deliver their data during their assigned slots to alleviate the contention-caused congestion.Finally,we implement BCCP in our sensor network testbed.The experiment results show that BCCP could detect area congestion in time,and improve the network performance significantly in terms of delay and packet loss rate.

  9. Analysis on Ad Hoc Routing Protocols in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    P.N.Renjith

    2012-12-01

    Full Text Available Outlook of wireless communication system marked an extreme transform with the invention of Wireless Sensor Networks (WSN. WSN is a promising technolog y for enabling a variety of applications like environmental monitoring, security and applications that save our lives and assets. In WSN, large numbers of sensor nodes are deployed to sensing and gathering information and forward them to the base station with the help of routing protocol. Routing protocols plays a major role by identifying and maintaining the routes in the network. Competence o f sensor networks relay on the strong and effective routing protocol used. In this paper, we present a simulation based performance evaluation of differen t Ad hoc routing protocols like AODV, DYMO, FSR, LANM AR, RIP and ZRP in Wireless Sensor Networks. Based on the study, the future research areas and k ey challenges for routing protocol in WSN are to optimize network performance for QoS support and en ergy conservation

  10. Probabilistic Checkpointing Protocol to Sensor Network Fault-Tolerant

    Directory of Open Access Journals (Sweden)

    Titouna Faiza

    2012-09-01

    Full Text Available A wireless sensor network WSN is a collection of autonomous sensors nodes organized into a cooperative network. A sensor node transmits the data quantity to the sink. Indeed, a failed sink may abort the overall mission of the network. Due to their crucial functions, sinks must be designed and maintained to be robust enough in order to face trouble coming from the harsh environment. Thus, as a keystone of a WSN, a sink has to be provided with ability to recover from failures. In this paper, we propose a new protocol avoiding to the sink to be a central point of failure. First, we model a sensor node failure estimation problem through a causal network. Then, we show how the checkpointing process ensures the recovery of the network. This approach reduces both energy consumption and communication bandwidth requirements, and prolongs the lifetime of WSN. Interesting results are given by simulation

  11. Need and Role of Underwater Acoustic Sensor Networks

    Directory of Open Access Journals (Sweden)

    Tajinder Singh

    2013-07-01

    Full Text Available The field of underwater acoustic sensor networking is growing rapidly thanks to the key role it plays in many military and commercial applications. Among these are disaster prevention, tactical surveillance, offshore exploration, pollution monitoring and oceanographic data collection. Moreover, unmanned or autonomous underwater vehicles (UUVs, AUVs, equipped with sensors, will enable the exploration of natural undersea resources and gathering of scientific data in collaborative monitoring missions. Underwater acoustic networking is the enabling technology for these applications. The objective of this paper is to understand several fundamental key aspects of underwater acoustic communications. Different architectures for two-dimensional and three-dimensional underwater sensor networks are discussed, and the characteristics of the underwater channel are detailed. The main challenges for the development of efficient networking solutions posed by the underwater environment are detailed. This paper also presents a detailed explanation of the sensor networks used in tsunami detection. We then present an overview of the recent advances

  12. AEGIS: A Lightweight Firewall for Wireless Sensor Networks

    Science.gov (United States)

    Hossain, Mohammad Sajjad; Raghunathan, Vijay

    Firewalls are an essential component in today's networked computing systems (desktops, laptops, and servers) and provide effective protection against a variety of over-the-network security attacks. With the development of technologies such as IPv6 and 6LoWPAN that pave the way for Internet-connected embedded systems and sensor networks, these devices will soon be subject to (and need to be defended against) similar security threats. As a first step, this paper presents Aegis, a lightweight, rule-based firewall for networked embedded systems such as wireless sensor networks. Aegis is based on a semantically rich, yet simple, rule definition language. In addition, Aegis is highly efficient during operation, runs in a transparent manner from running applications, and is easy to maintain. Experimental results obtained using real sensor nodes and cycle-accurate simulations demonstrate that Aegis successfully performs gatekeeping of a sensor node's communication traffic in a flexible manner with minimal overheads.

  13. Wireless Sensor Network Metrics for Real-Time Systems

    Science.gov (United States)

    2009-05-20

    hopping networks such as Bluetooth and FH- CDMA networks. The 802.11 Distributed Coordination Function (DCF) interference model has the same constraint as...the IASTED International Symposium on Distributed Sensor Networks ( DSN ), November 2008. [81] Joseph Polastre, Jason Hill, and David Culler

  14. Spatial anomaly detection in sensor networks using neighborhood information

    NARCIS (Netherlands)

    Bosman, H.H.W.J.; Iacca, G.; Tejada, A.; Wörtche, H.J.; Liotta, A.

    2016-01-01

    The field of wireless sensor networks (WSNs), embedded systems with sensing and networking capabil- ity, has now matured after a decade-long research effort and technological advances in electronics and networked systems. An important remaining challenge now is to extract meaningful information from

  15. Enhanced Differentiated Surveillance for Static and Random Mobile Sensor Networks

    Directory of Open Access Journals (Sweden)

    Xue-Qin Zhu

    2011-10-01

    Full Text Available Wireless integrated sensor networks, which include collecting, processing data and communication, are used more and more widely for its low cost and convenient deployment. Nowadays the researches of sensor networks are fairly active. The security is one of the key questions in sensor networks. Intrusion detection is a kind of network security technologies used to detect any behavior that will damage or attempt to damage system confidentiality, integrality or availability, and it can provide the reasonable supplement to intrusion prevention mechanism, and construct a second wall of defense for network and system.  This paper mainly focuses on the energy efficient intrusion detection technology. According to the characteristics of sensor network and the specialty of the invasions in sensor network, this paper presents an intrusion detection model based on statistics anomaly in sensor networks. The algorithm establishes models for the normal state of the nodes, and makes decisions through the deviation degree of observed value. The algorithm is fault-tolerant for non-invasion anomaly when the communication between nodes break down or the accident wrongly create anomaly.

  16. Clustering Algorithms for Heterogeneous Wireless Sensor Networks - A Brief Survey

    Directory of Open Access Journals (Sweden)

    A.MeenaKowshalya

    2011-09-01

    Full Text Available Wireless sensor networks (WSN are emerging in vari ous fields like disaster management, battle field surveillance and border security surveillance. A la rge number of sensors in these applications are unattended and work autonomously. Clustering is a k ey technique to improve the network lifetime, reduc e the energy consumption and increase the scalability of the sensor network. In this paper, we study the impact of heterogeneity of the nodes to the perform ance of WSN. This paper surveys the different clust ering algorithm for heterogeneous WSN .

  17. Security Analysis of Routing Protocols in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Mohammad Sadeghi

    2012-01-01

    Full Text Available In this paper, I describe briefly some of the different types of attacks on wireless sensor networks such as Sybil, HELLO, Wormhole and Sinkhole attacks. Then I describe security analysis of some major routing protocols in wireless sensor network such as Directed Diffusion, TinyOS beaconing, geographic and Rumor routings in term of attacks and security goals. As a result I explain some secure routing protocols for wireless sensor network and is discussed briefly some methods and policy of these protocols to meet their security requirements. At last some simulation results of these protocols that have been done by their designer are mentioned.

  18. Coverage analysis for sensor networks based on Clifford algebra

    Institute of Scientific and Technical Information of China (English)

    XIE WeiXin; CAO WenMing; MENG Shan

    2008-01-01

    The coverage performance is the foundation of information acquisition in distrib-uted sensor networks. The previously proposed coverage work was mostly based on unit disk coverage model or ball coverage model in 2D or 3D space, respectively. However, most methods cannot give a homogeneous coverage model for targets with hybrid types. This paper presents a coverage analysis approach for sensor networks based on Clifford algebra and establishes a homogeneous coverage model for sensor networks with hybrid types of targets. The effectiveness of the approach is demonstrated with examples.

  19. Composite nanowire networks for biological sensor platforms

    Science.gov (United States)

    Jabal, Jamie Marie Francisco

    The main goal of this research is to design, fabricate, and test a nanomaterial-based platform adequate for the measurement of physiological changes in living cells. The two primary objectives toward this end are (1) the synthesis and selection of a suitable nanomaterial and (2) the demonstration of cellular response to a direct stimulus. Determining a useful nanomaterial morphology and behavior within a sensor configuration presented challenges based on cellular integration and access to electrochemical characterization. The prospect for feasible optimization and eventual scale-up in technology were also significant. Constraining criteria are that the nanomaterial detector must (a) be cheap and relatively easy to fabricate controllably, (b) encourage cell attachment, (c) exhibit consistent wettability over time, and (d) facilitate electrochemical processes. The ultimate goal would be to transfer a proof-of-principle and proof-of-design for a whole-cell sensor technology that is cost effective and has a potential for hand-held packaging. Initial tasks were to determine an effective and highly-functional nanomaterial for biosensors by assessing wettability, morphology and conductivity behavior of several candidate materials: gallium nitride nanowires, silicon dioxide nanosprings and nanowires, and titania nanofibers. Electrospinning poly(vinyl pyrrolidone)-coated titania nano- and microfibers (O20 nm--2 microm) into a pseudo-random network is controllable to a uniformity of 1--2° in contact angle. The final electrode can be prepared with a precise wettability ranging from partial wetting to ultrahydrophobic (170°) on a variety of substrates: glass, indium tin oxide, silicon, and aluminum. Fiber mats exhibit excellent mechanical stability against rinsing, and support the incubation of epithelial (skin) and pancreatic cells. Impedance spectroscopy on the whole-cell sensor shows resistive changes attributed to cell growth as well as complex frequency

  20. Active self-testing noise measurement sensors for large-scale environmental sensor networks.

    Science.gov (United States)

    Domínguez, Federico; Cuong, Nguyen The; Reinoso, Felipe; Touhafi, Abdellah; Steenhaut, Kris

    2013-12-13

    Large-scale noise pollution sensor networks consist of hundreds of spatially distributed microphones that measure environmental noise. These networks provide historical and real-time environmental data to citizens and decision makers and are therefore a key technology to steer environmental policy. However, the high cost of certified environmental microphone sensors render large-scale environmental networks prohibitively expensive. Several environmental network projects have started using off-the-shelf low-cost microphone sensors to reduce their costs, but these sensors have higher failure rates and produce lower quality data. To offset this disadvantage, we developed a low-cost noise sensor that actively checks its condition and indirectly the integrity of the data it produces. The main design concept is to embed a 13 mm speaker in the noise sensor casing and, by regularly scheduling a frequency sweep, estimate the evolution of the microphone's frequency response over time. This paper presents our noise sensor's hardware and software design together with the results of a test deployment in a large-scale environmental network in Belgium. Our middle-range-value sensor (around €50) effectively detected all experienced malfunctions, in laboratory tests and outdoor deployments, with a few false positives. Future improvements could further lower the cost of our sensor below €10.

  1. An intelligent surveillance platform for large metropolitan areas with dense sensor deployment

    National Research Council Canada - National Science Library

    Fernández, Jorge; Calavia, Lorena; Baladrón, Carlos; Aguiar, Javier M; Carro, Belén; Sánchez-Esguevillas, Antonio; Alonso-López, Jesus A; Smilansky, Zeev

    2013-01-01

    .... In order to automate the analysis of the myriad of data streams generated by the visual sensors, the platform's control center includes an alarm detection engine which comprises three components...

  2. A survey on virtualization of Wireless Sensor Networks.

    Science.gov (United States)

    Islam, Md Motaharul; Hassan, Mohammad Mehedi; Lee, Ga-Won; Huh, Eui-Nam

    2012-01-01

    Wireless Sensor Networks (WSNs) are gaining tremendous importance thanks to their broad range of commercial applications such as in smart home automation, health-care and industrial automation. In these applications multi-vendor and heterogeneous sensor nodes are deployed. Due to strict administrative control over the specific WSN domains, communication barriers, conflicting goals and the economic interests of different WSN sensor node vendors, it is difficult to introduce a large scale federated WSN. By allowing heterogeneous sensor nodes in WSNs to coexist on a shared physical sensor substrate, virtualization in sensor network may provide flexibility, cost effective solutions, promote diversity, ensure security and increase manageability. This paper surveys the novel approach of using the large scale federated WSN resources in a sensor virtualization environment. Our focus in this paper is to introduce a few design goals, the challenges and opportunities of research in the field of sensor network virtualization as well as to illustrate a current status of research in this field. This paper also presents a wide array of state-of-the art projects related to sensor network virtualization.

  3. A Survey on Virtualization of Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Ga-Won Lee

    2012-02-01

    Full Text Available Wireless Sensor Networks (WSNs are gaining tremendous importance thanks to their broad range of commercial applications such as in smart home automation, health-care and industrial automation. In these applications multi-vendor and heterogeneous sensor nodes are deployed. Due to strict administrative control over the specific WSN domains, communication barriers, conflicting goals and the economic interests of different WSN sensor node vendors, it is difficult to introduce a large scale federated WSN. By allowing heterogeneous sensor nodes in WSNs to coexist on a shared physical sensor substrate, virtualization in sensor network may provide flexibility, cost effective solutions, promote diversity, ensure security and increase manageability. This paper surveys the novel approach of using the large scale federated WSN resources in a sensor virtualization environment. Our focus in this paper is to introduce a few design goals, the challenges and opportunities of research in the field of sensor network virtualization as well as to illustrate a current status of research in this field. This paper also presents a wide array of state-of-the art projects related to sensor network virtualization.

  4. Vehicle Identification using Discrete Spectrums in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Seung S. Yang

    2008-04-01

    Full Text Available We studied the possibility of using wireless sensor networks for vehicle identification in a large open field. This is exciting research in that it not only presents a challenge but has practicality. The challenge here is to develop algorithms and/or protocols for sensor nodes to execute a given task. Since each sensor node has limited computation and communication capabilities, these limitations prohibit the use of algorithms and/or protocols developed for conventional computers and networks. Each sensor is dispensable and easily deployable, it can do meaningful work when it is collaborated as a networked cluster; therefore it is very practical in application. Our goal is to identify vehicles in real time using acoustic signal sensors and wireless networks. Our contribution in this paper is three fold. First, we developed a simple vehicle sound identification algorithm enough to be implemented for capacity limited sensor nodes. Second, we proposed architecture and protocols of wireless sensor networks for vehicle identification using this developed sound classification algorithm. Third, we proposed a cooperation model among sensors to expedite the classification process. Our preliminary results show the proposed architecture and protocols are promising.

  5. Bio-Inspired Stretchable Absolute Pressure Sensor Network.

    Science.gov (United States)

    Guo, Yue; Li, Yu-Hung; Guo, Zhiqiang; Kim, Kyunglok; Chang, Fu-Kuo; Wang, Shan X

    2016-01-02

    A bio-inspired absolute pressure sensor network has been developed. Absolute pressure sensors, distributed on multiple silicon islands, are connected as a network by stretchable polyimide wires. This sensor network, made on a 4'' wafer, has 77 nodes and can be mounted on various curved surfaces to cover an area up to 0.64 m × 0.64 m, which is 100 times larger than its original size. Due to Micro Electro-Mechanical system (MEMS) surface micromachining technology, ultrathin sensing nodes can be realized with thicknesses of less than 100 µm. Additionally, good linearity and high sensitivity (~14 mV/V/bar) have been achieved. Since the MEMS sensor process has also been well integrated with a flexible polymer substrate process, the entire sensor network can be fabricated in a time-efficient and cost-effective manner. Moreover, an accurate pressure contour can be obtained from the sensor network. Therefore, this absolute pressure sensor network holds significant promise for smart vehicle applications, especially for unmanned aerial vehicles.

  6. On the Design and Implementation of Wireless Multimedia Sensor Networks

    Directory of Open Access Journals (Sweden)

    Qing Pang

    2010-09-01

    Full Text Available Wireless Sensor Networks (WSN mainly deal with scalar data such as temperature, humidity, and lightwhich are very suitable for low rate and low power IEEE 802.15 based networking technology. Thecommercial off-the-shelf (COTS CMOS camera has fostered researchers to push WSN a step further.The unique properties of multimedia data delivery pose fresh challenges for resource constrained sensornetworks. Transmitting raw data is very costly while limited processing power prevents sophisticatedmultimedia processing at the sensor nodes. Wireless sensor networks offer an attractive choice for lowcost solutions for transmitting data wirelessly to a database to be evaluated. Wireless networks of visualsensors have recently emerged as a new type of sensor-based intelligence system. The goal of the visualsensor network is to provide a user with visual information from an arbitrary viewpoint within themonitored field. Wireless networks in combination with image sensors open up a multitude of previouslyunthinkable sensing applications. In an on-going project, we are designing and implementing a sensornode with a camera which would be capable of acquiring still images, transfer the data onto a personalcomputer through wireless communication, and store the image on a personal computer. This paperexplains the process of capturing the raw image data with a camera sensor and the interfacing of thecamera with the Overo Air computer-on-module (COM. Camera visibility and resolution will also beexplained in this paper along with the procedure taken to configure the sensor node.

  7. Service Oriented Architecture for Wireless Sensor Networks in Agriculture

    Science.gov (United States)

    Sawant, S. A.; Adinarayana, J.; Durbha, S. S.; Tripathy, A. K.; Sudharsan, D.

    2012-08-01

    Rapid advances in Wireless Sensor Network (WSN) for agricultural applications has provided a platform for better decision making for crop planning and management, particularly in precision agriculture aspects. Due to the ever-increasing spread of WSNs there is a need for standards, i.e. a set of specifications and encodings to bring multiple sensor networks on common platform. Distributed sensor systems when brought together can facilitate better decision making in agricultural domain. The Open Geospatial Consortium (OGC) through Sensor Web Enablement (SWE) provides guidelines for semantic and syntactic standardization of sensor networks. In this work two distributed sensing systems (Agrisens and FieldServer) were selected to implement OGC SWE standards through a Service Oriented Architecture (SOA) approach. Online interoperable data processing was developed through SWE components such as Sensor Model Language (SensorML) and Sensor Observation Service (SOS). An integrated web client was developed to visualize the sensor observations and measurements that enables the retrieval of crop water resources availability and requirements in a systematic manner for both the sensing devices. Further, the client has also the ability to operate in an interoperable manner with any other OGC standardized WSN systems. The study of WSN systems has shown that there is need to augment the operations / processing capabilities of SOS in order to understand about collected sensor data and implement the modelling services. Also, the very low cost availability of WSN systems in future, it is possible to implement the OGC standardized SWE framework for agricultural applications with open source software tools.

  8. CMOS: Efficient Clustered Data Monitoring in Sensor Networks

    Directory of Open Access Journals (Sweden)

    Jun-Ki Min

    2013-01-01

    Full Text Available Tiny and smart sensors enable applications that access a network of hundreds or thousands of sensors. Thus, recently, many researchers have paid attention to wireless sensor networks (WSNs. The limitation of energy is critical since most sensors are battery-powered and it is very difficult to replace batteries in cases that sensor networks are utilized outdoors. Data transmission between sensor nodes needs more energy than computation in a sensor node. In order to reduce the energy consumption of sensors, we present an approximate data gathering technique, called CMOS, based on the Kalman filter. The goal of CMOS is to efficiently obtain the sensor readings within a certain error bound. In our approach, spatially close sensors are grouped as a cluster. Since a cluster header generates approximate readings of member nodes, a user query can be answered efficiently using the cluster headers. In addition, we suggest an energy efficient clustering method to distribute the energy consumption of cluster headers. Our simulation results with synthetic data demonstrate the efficiency and accuracy of our proposed technique.

  9. Ant Colony Optimization For Improving Network Lifetime In Wireless Sensor Networks

    OpenAIRE

    Sunny Behal; Mr. Amandeep Singh

    2013-01-01

    Wireless sensor networks is very important field in today’s technology and one may concern about the life time of sensors as they have no facility to change the battery of those sensors inside the field. Wireless Sensor Networks are prone to node failure due to power loss. In order to provide reliable service through the network, the network should be self-adjusting and must have adaptable properties as required from time to time. Here in this research we have proposed a new algorithm which i...

  10. Dense seismic networks as a tool to characterize active faulting in regions of slow deformation

    Science.gov (United States)

    Custódio, Susana; Arroucau, Pierre; Carrilho, Fernando; Cesca, Simone; Dias, Nuno; Matos, Catarina; Vales, Dina

    2016-04-01

    The theory of plate tectonics states that the relative motion between lithospheric plates is accommodated at plate boundaries, where earthquakes occur on long faults. However, earthquakes with a wide range of magnitudes also occur both off plate boundaries, in intra-plate settings, and along discontinuous, diffuse plate boundaries. These settings are characterized by low rates of lithospheric deformation. A fundamental limitation in the study of slowly deforming regions is the lack of high-quality observations. In these regions, earthquake catalogs have traditionally displayed diffuse seismicity patterns. The location, geometry and activity rate of faults - all basic parameters for understanding fault dynamics - are usually poorly known. The dense seismic networks deployed in the last years around the world have opened new windows in observational seismology. Although high-magnitude earthquakes are rare in regions of slow deformation, low-magnitude earthquakes are well observable on the time-scale of these deployments. In this presentation, we will show how data from dense seismic deployments can be used to characterize faulting in regions of slow deformation. In particular, we will present the case study of western Iberia, a region undergoing low-rate deformation and which has generated some of the largest earthquakes in Europe, both intraplate (mainland) and interplate (offshore). The methods that we employ include automated earthquake detection methods to lower the completeness magnitude of catalogs, earthquake relocations, focal mechanisms patterns, waveform similarity and clustering analysis.

  11. Collaborative Supervised Learning for Sensor Networks

    Science.gov (United States)

    Wagstaff, Kiri L.; Rebbapragada, Umaa; Lane, Terran

    2011-01-01

    Collaboration methods for distributed machine-learning algorithms involve the specification of communication protocols for the learners, which can query other learners and/or broadcast their findings preemptively. Each learner incorporates information from its neighbors into its own training set, and they are thereby able to bootstrap each other to higher performance. Each learner resides at a different node in the sensor network and makes observations (collects data) independently of the other learners. After being seeded with an initial labeled training set, each learner proceeds to learn in an iterative fashion. New data is collected and classified. The learner can then either broadcast its most confident classifications for use by other learners, or can query neighbors for their classifications of its least confident items. As such, collaborative learning combines elements of both passive (broadcast) and active (query) learning. It also uses ideas from ensemble learning to combine the multiple responses to a given query into a single useful label. This approach has been evaluated against current non-collaborative alternatives, including training a single classifier and deploying it at all nodes with no further learning possible, and permitting learners to learn from their own most confident judgments, absent interaction with their neighbors. On several data sets, it has been consistently found that active collaboration is the best strategy for a distributed learner network. The main advantages include the ability for learning to take place autonomously by collaboration rather than by requiring intervention from an oracle (usually human), and also the ability to learn in a distributed environment, permitting decisions to be made in situ and to yield faster response time.

  12. Sensor selection for parameterized random field estimation in wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    We consider the random field estimation problem with parametric trend in wireless sensor networks where the field can be described by unknown parameters to be estimated. Due to the limited resources, the network selects only a subset of the sensors to perform the estimation task with a desired performance under the D-optimal criterion. We propose a greedy sampling scheme to select the sensor nodes according to the information gain of the sensors. A distributed algorithm is also developed by consensus-based ...

  13. Clustered Hierarchy in Sensor Networks: Performance and Security

    Directory of Open Access Journals (Sweden)

    Mohammed Abuhelaleh

    2009-07-01

    Full Text Available Many papers have been proposed in order to increase the wireless sensor networks performance; This kind of network has limited resources, where the energy in each sensor came from a small battery that sometime is hard to be replaced or recharged. Transmission energy is the most concern part where the higher energy consumption takes place. Clustered hierarchy has been proposed in many papers; in most cases, it provides the network with better performance than other protocols. In our paper, first we discuss some of techniques,relates to this protocol, that have been proposed for energy efficiency; some of them were proposed to provide the network with more security level. Our proposal then suggests some modifications to some of these techniques to provide the network with more energy saving that should lead to high performance; also we apply our technique on an existing one that proposed to increase the security level of cluster sensor networks.

  14. The interseismic velocity field of the central Apennines from a dense GPS network

    Directory of Open Access Journals (Sweden)

    Alessandro Galvani

    2013-02-01

    Full Text Available Since 1999, we have repeatedly surveyed the central Apennines through a dense survey-style geodetic network, the Central Apennines Geodetic Network (CAGeoNet. CAGeoNet consists of 123 benchmarks distributed over an area of ca. 180 km × 130 km, from the Tyrrhenian coast to the Adriatic coast, with an average inter-site distance of 3 km to 5 km. The network is positioned across the main seismogenic structures of the region that are capable of generating destructive earthquakes. Here, we show the horizontal GPS velocity field of both CAGeoNet and continuous GPS stations in this region, as estimated from the position–time series in the time span from 1999 to 2007. We analyzed the data using both the Bernese and GAMIT software, rigorously combining the two solutions to obtain a validated result. Then, we analyzed the strain-rate field, which shows a region of extension along the axis of the Apennine chain, with values from 2 × 10–9 yr–1 to 66·× 10–9 yr–1, and a relative minimum of ca. 20 × 10–9 yr–1 located in the L'Aquila basin area. Our velocity field represents an improved estimation of the ongoing elastic interseismic deformation of the central Apennines, and in particular relating to the area of the L'Aquila earthquake of April 6, 2009.

  15. Rapid estimation of tsunami source centroid location using a dense offshore observation network

    Science.gov (United States)

    Yamamoto, N.; Hirata, K.; Aoi, S.; Suzuki, W.; Nakamura, H.; Kunugi, T.

    2016-05-01

    This paper proposes a rapid method of estimating tsunami source locations using real-time ocean-bottom hydrostatic pressure data from a dense offshore observation network. We defined two characteristic locations representing the real-time tsunami disturbance and the initial sea surface height distribution. First, we defined the tsunami centroid location (TCL), which is the centroid location of the maximum absolute amplitude of the real-time ocean-bottom hydrostatic pressure changes. Second, we defined the centroid location of the absolute values of the initial sea surface height displacements. To determine whether the TCL can approximate the centroid location of the tsunami source, we examined approximately 1000 near-field synthetic tsunami scenarios and a realistic tsunami scenario of the 2011 Tohoku earthquake in the Japan Trench. From these examinations, it was confirmed that in most scenarios, the TCLs obtained within a few minutes after the occurrence of an earthquake were close to the actual corresponding tsunami source locations.

  16. Spatial evolutionary public goods game on complete graph and dense complex networks.

    Science.gov (United States)

    Kim, Jinho; Chae, Huiseung; Yook, Soon-Hyung; Kim, Yup

    2015-03-23

    We study the spatial evolutionary public goods game (SEPGG) with voluntary or optional participation on a complete graph (CG) and on dense networks. Based on analyses of the SEPGG rate equation on finite CG, we find that SEPGG has two stable states depending on the value of multiplication factor r, illustrating how the "tragedy of the commons" and "an anomalous state without any active participants" occurs in real-life situations. When r is low (). We also derive the exact scaling relation for r*. All of the results are confirmed by numerical simulation. Furthermore, we find that a cooperator-dominant state emerges when the number of participants or the mean degree, 〈k〉, decreases. We also investigate the scaling dependence of the emergence of cooperation on r and 〈k〉. These results show how "tragedy of the commons" disappears when cooperation between egoistic individuals without any additional socioeconomic punishment increases.

  17. A Multi-Step Assessment Scheme for Seismic Network Site Selection in Densely Populated Areas

    Science.gov (United States)

    Plenkers, Katrin; Husen, Stephan; Kraft, Toni

    2015-10-01

    We developed a multi-step assessment scheme for improved site selection during seismic network installation in densely populated areas. Site selection is a complex process where different aspects (seismic background noise, geology, and financing) have to be taken into account. In order to improve this process, we developed a step-wise approach that allows quantifying the quality of a site by using, in addition to expert judgement and test measurements, two weighting functions as well as reference stations. Our approach ensures that the recording quality aimed for is reached and makes different sites quantitatively comparable to each other. Last but not least, it is an easy way to document the decision process, because all relevant parameters are listed, quantified, and weighted.

  18. Base Station Ordering for Emergency Call Localization in Ultra-dense Cellular Networks

    KAUST Repository

    Elsawy, Hesham

    2017-10-04

    This paper proposes the base station ordering localization technique (BoLT) for emergency call localization in cellular networks. Exploiting the foreseen ultra-densification of the next-generation (5G and beyond) cellular networks, we utilize higher-order Voronoi tessellations to provide ubiquitous localization services that are in compliance to the public safety standards in cellular networks. The proposed localization algorithm runs at the base stations (BSs) and requires minimal operation from agents (i.e., mobile users). Particularly, BoLT requires each agent to feedback a neighbor cell list (NCL) that contains the order of neighboring BSs based on the received signal power in the pilots sent from these BSs. Moreover, this paper utilizes stochastic geometry to develop a tractable mathematical model to assess the performance of BoLT in a general network setting. The goal of this paper is to answer the following two fundamental questions: i) how many BSs should be ordered and reported by the agent to achieve a desirable localization accuracy? and ii) what is the localization error probability given that the pilot signals are subject to shadowing? Assuming that the BSs are deployed according to a Poisson point process (PPP), we answer these two questions via characterizing the tradeoff between the area of location region (ALR) and the localization error probability in terms of the number of BSs ordered by the agent. The results show that reporting the order of six neighboring BSs is sufficient to localize the agent within 10% of the cell area. Increasing the number of reported BSs to ten confines the location region to 1% of the cell area. This would translate to the range of a few meters to decimeters in the foreseen ultra-dense 5G networks.

  19. TActical Sensor network TEst bed (TASTE)

    NARCIS (Netherlands)

    Dorp, P. van; Bekman, H.H.P.T.; Sandbrink, R.D.J.

    2008-01-01

    TASTE is a software tool for specifying and deploying unattended ground sensors (UGS) in a composition which the commander assumes will suit his needs the best. With TASTE different sensor types such as acoustic, magnetic, seismic, radar and IR imaging sensors can be deployed virtually and their

  20. TActical Sensor network TEst bed (TASTE)

    NARCIS (Netherlands)

    Dorp, P. van; Bekman, H.H.P.T.; Sandbrink, R.D.J.

    2008-01-01

    TASTE is a software tool for specifying and deploying unattended ground sensors (UGS) in a composition which the commander assumes will suit his needs the best. With TASTE different sensor types such as acoustic, magnetic, seismic, radar and IR imaging sensors can be deployed virtually and their ind

  1. Energy Efficient Cluster Based Scheduling Scheme for Wireless Sensor Networks.

    Science.gov (United States)

    Janani, E Srie Vidhya; Kumar, P Ganesh

    2015-01-01

    The energy utilization of sensor nodes in large scale wireless sensor network points out the crucial need for scalable and energy efficient clustering protocols. Since sensor nodes usually operate on batteries, the maximum utility of network is greatly dependent on ideal usage of energy leftover in these sensor nodes. In this paper, we propose an Energy Efficient Cluster Based Scheduling Scheme for wireless sensor networks that balances the sensor network lifetime and energy efficiency. In the first phase of our proposed scheme, cluster topology is discovered and cluster head is chosen based on remaining energy level. The cluster head monitors the network energy threshold value to identify the energy drain rate of all its cluster members. In the second phase, scheduling algorithm is presented to allocate time slots to cluster member data packets. Here congestion occurrence is totally avoided. In the third phase, energy consumption model is proposed to maintain maximum residual energy level across the network. Moreover, we also propose a new packet format which is given to all cluster member nodes. The simulation results prove that the proposed scheme greatly contributes to maximum network lifetime, high energy, reduced overhead, and maximum delivery ratio.

  2. Probability Model for Data Redundancy Detection in Sensor Networks

    Directory of Open Access Journals (Sweden)

    Suman Kumar

    2009-01-01

    Full Text Available Sensor networks are made of autonomous devices that are able to collect, store, process and share data with other devices. Large sensor networks are often redundant in the sense that the measurements of some nodes can be substituted by other nodes with a certain degree of confidence. This spatial correlation results in wastage of link bandwidth and energy. In this paper, a model for two associated Poisson processes, through which sensors are distributed in a plane, is derived. A probability condition is established for data redundancy among closely located sensor nodes. The model generates a spatial bivariate Poisson process whose parameters depend on the parameters of the two individual Poisson processes and on the distance between the associated points. The proposed model helps in building efficient algorithms for data dissemination in the sensor network. A numerical example is provided investigating the advantage of this model.

  3. Geographic wormhole detection in wireless sensor networks.

    Directory of Open Access Journals (Sweden)

    Mehdi Sookhak

    Full Text Available Wireless sensor networks (WSNs are ubiquitous and pervasive, and therefore; highly susceptible to a number of security attacks. Denial of Service (DoS attack is considered the most dominant and a major threat to WSNs. Moreover, the wormhole attack represents one of the potential forms of the Denial of Service (DoS attack. Besides, crafting the wormhole attack is comparatively simple; though, its detection is nontrivial. On the contrary, the extant wormhole defense methods need both specialized hardware and strong assumptions to defend against static and dynamic wormhole attack. The ensuing paper introduces a novel scheme to detect wormhole attacks in a geographic routing protocol (DWGRP. The main contribution of this paper is to detect malicious nodes and select the best and the most reliable neighbors based on pairwise key pre-distribution technique and the beacon packet. Moreover, this novel technique is not subject to any specific assumption, requirement, or specialized hardware, such as a precise synchronized clock. The proposed detection method is validated by comparisons with several related techniques in the literature, such as Received Signal Strength (RSS, Authentication of Nodes Scheme (ANS, Wormhole Detection uses Hound Packet (WHOP, and Wormhole Detection with Neighborhood Information (WDI using the NS-2 simulator. The analysis of the simulations shows promising results with low False Detection Rate (FDR in the geographic routing protocols.

  4. Wireless sensor networks for structural health monitoring

    CERN Document Server

    Cao, Jiannong

    2016-01-01

    This brief covers the emerging area of wireless sensor network (WSN)-based structural health monitoring (SHM) systems, and introduces the authors’ WSN-based platform called SenetSHM. It helps the reader differentiate specific requirements of SHM applications from other traditional WSN applications, and demonstrates how these requirements are addressed by using a series of systematic approaches. The brief serves as a practical guide, explaining both the state-of-the-art technologies in domain-specific applications of WSNs, as well as the methodologies used to address the specific requirements for a WSN application. In particular, the brief offers instruction for problem formulation and problem solving based on the authors’ own experiences implementing SenetSHM. Seven concise chapters cover the development of hardware and software design of SenetSHM, as well as in-field experiments conducted while testing the platform. The brief’s exploration of the SenetSHM platform is a valuable feature for civil engine...

  5. Sleep Deprivation Attack Detection in Wireless Sensor Network

    CERN Document Server

    Bhattasali, Tapalina; Sanyal, Sugata; 10.5120/5056-7374 10.5120/5056-7374 10.5120/5056-7374 10.5120/5056-7374

    2012-01-01

    Deployment of sensor network in hostile environment makes it mainly vulnerable to battery drainage attacks because it is impossible to recharge or replace the battery power of sensor nodes. Among different types of security threats, low power sensor nodes are immensely affected by the attacks which cause random drainage of the energy level of sensors, leading to death of the nodes. The most dangerous type of attack in this category is sleep deprivation, where target of the intruder is to maximize the power consumption of sensor nodes, so that their lifetime is minimized. Most of the existing works on sleep deprivation attack detection involve a lot of overhead, leading to poor throughput. The need of the day is to design a model for detecting intrusions accurately in an energy efficient manner. This paper proposes a hierarchical framework based on distributed collaborative mechanism for detecting sleep deprivation torture in wireless sensor network efficiently. Proposed model uses anomaly detection technique ...

  6. Routing Security Issues in Wireless Sensor Networks: Attacks and Defenses

    CERN Document Server

    Sen, Jaydip

    2011-01-01

    Wireless Sensor Networks (WSNs) are rapidly emerging as an important new area in wireless and mobile computing research. Applications of WSNs are numerous and growing, and range from indoor deployment scenarios in the home and office to outdoor deployment scenarios in adversary's territory in a tactical battleground (Akyildiz et al., 2002). For military environment, dispersal of WSNs into an adversary's territory enables the detection and tracking of enemy soldiers and vehicles. For home/office environments, indoor sensor networks offer the ability to monitor the health of the elderly and to detect intruders via a wireless home security system. In each of these scenarios, lives and livelihoods may depend on the timeliness and correctness of the sensor data obtained from dispersed sensor nodes. As a result, such WSNs must be secured to prevent an intruder from obstructing the delivery of correct sensor data and from forging sensor data. To address the latter problem, end-to-end data integrity checksums and pos...

  7. Intelligent Wireless Sensor Networks for System Health Monitoring

    Science.gov (United States)

    Alena, Rick

    2011-01-01

    Wireless sensor networks (WSN) based on the IEEE 802.15.4 Personal Area Network (PAN) standard are finding increasing use in the home automation and emerging smart energy markets. The network and application layers, based on the ZigBee 2007 Standard, provide a convenient framework for component-based software that supports customer solutions from multiple vendors. WSNs provide the inherent fault tolerance required for aerospace applications. The Discovery and Systems Health Group at NASA Ames Research Center has been developing WSN technology for use aboard aircraft and spacecraft for System Health Monitoring of structures and life support systems using funding from the NASA Engineering and Safety Center and Exploration Technology Development and Demonstration Program. This technology provides key advantages for low-power, low-cost ancillary sensing systems particularly across pressure interfaces and in areas where it is difficult to run wires. Intelligence for sensor networks could be defined as the capability of forming dynamic sensor networks, allowing high-level application software to identify and address any sensor that joined the network without the use of any centralized database defining the sensors characteristics. The IEEE 1451 Standard defines methods for the management of intelligent sensor systems and the IEEE 1451.4 section defines Transducer Electronic Datasheets (TEDS), which contain key information regarding the sensor characteristics such as name, description, serial number, calibration information and user information such as location within a vehicle. By locating the TEDS information on the wireless sensor itself and enabling access to this information base from the application software, the application can identify the sensor unambiguously and interpret and present the sensor data stream without reference to any other information. The application software is able to read the status of each sensor module, responding in real-time to changes of

  8. Topology optimisation for energy management in underwater sensor networks

    Science.gov (United States)

    Jha, Devesh K.; Wettergren, Thomas A.; Ray, Asok; Mukherjee, Kushal

    2015-09-01

    In general, battery-powered sensors in a sensor network are operable as long as they can communicate sensed data to a processing node. In this context, a sensor network has two competing objectives: (1) maximisation of the network performance with respect to the probability of successful search for a specified upper bound on the probability of false alarms, and (2) maximisation of the network's operable life. As both sensing and communication of data consume battery energy at the sensing nodes of the sensor network, judicious use of sensing power and communication power is needed to improve the lifetime of the sensor network. This paper presents an adaptive energy management policy that will optimally allocate the available energy between sensing and communication at each sensing node to maximise the network performance subject to specified constraints. Under the assumptions of fixed total energy allocation for a sensor network operating for a specified time period, the problem is reduced to synthesis of an optimal network topology that maximises the probability of successful search (of a target) over a surveillance region. In a two-stage optimisation, a genetic algorithm-based meta-heuristic search is first used to efficiently explore the global design space, and then a local pattern search algorithm is used for convergence to an optimal solution. The results of performance optimisation are generated on a simulation test bed to validate the proposed concept. Adaptation to energy variations across the network is shown to be manifested as a change in the optimal network topology by using sensing and communication models for underwater environment. The approximate Pareto-optimal surface is obtained as a trade-off between network lifetime and probability of successful search over the surveillance region.

  9. MmWave massive-MIMO-based wireless backhaul for the 5G ultra-dense network

    OpenAIRE

    Gao, Zhen; Dai, Linglong; Mi; Wang, Zhaocheng; Imran, Muhammad Ali; Shakir, Muhammad Zeeshan

    2015-01-01

    Ultra-dense network (UDN) has been considered as a promising candidate for future 5G network to meet the explosive data demand. To realize UDN, a reliable, Gigahertz bandwidth, and cost-effective backhaul connecting ultra-dense small-cell base stations (BSs) and macro-cell BS is prerequisite. Millimeter-wave (mmWave) can provide the potential Gbps traffic for wireless backhaul. Moreover, mmWave can be easily integrated with massive MIMO for the improved link reliability. In this article, we d...

  10. Performance Evaluation of Dynamic and Static Sensor Node in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Payal T Mahida

    2013-02-01

    Full Text Available A wireless sensor network (WSN consists of spatially distributed autonomous sensors to monitor physical or environmental conditions, such as temperature, sound, pressure, etc. and to cooperatively pass their data through the network to a main location. The main goal of this paper is to analysis and Evaluation of AODV routing protocol for wireless sensor network and compares the Static and Dynamic Scenarios for PDR, e2e Delay and throughput. The goal of this work is to perform a simulation with different metrics, analysis of the results and deriving a conclusion on basis of performance evaluation.

  11. Reliability Analysis of Wireless Sensor Networks Using Markovian Model

    Directory of Open Access Journals (Sweden)

    Jin Zhu

    2012-01-01

    Full Text Available This paper investigates reliability analysis of wireless sensor networks whose topology is switching among possible connections which are governed by a Markovian chain. We give the quantized relations between network topology, data acquisition rate, nodes' calculation ability, and network reliability. By applying Lyapunov method, sufficient conditions of network reliability are proposed for such topology switching networks with constant or varying data acquisition rate. With the conditions satisfied, the quantity of data transported over wireless network node will not exceed node capacity such that reliability is ensured. Our theoretical work helps to provide a deeper understanding of real-world wireless sensor networks, which may find its application in the fields of network design and topology control.

  12. Decentralized System Identification Using Stochastic Subspace Identification for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Soojin Cho

    2015-04-01

    Full Text Available Wireless sensor networks (WSNs facilitate a new paradigm to structural identification and monitoring for civil infrastructure. Conventional structural monitoring systems based on wired sensors and centralized data acquisition systems are costly for installation as well as maintenance. WSNs have emerged as a technology that can overcome such difficulties, making deployment of a dense array of sensors on large civil structures both feasible and economical. However, as opposed to wired sensor networks in which centralized data acquisition and processing is common practice, WSNs require decentralized computing algorithms to reduce data transmission due to the limitation associated with wireless communication. In this paper, the stochastic subspace identification (SSI technique is selected for system identification, and SSI-based decentralized system identification (SDSI is proposed to be implemented in a WSN composed of Imote2 wireless sensors that measure acceleration. The SDSI is tightly scheduled in the hierarchical WSN, and its performance is experimentally verified in a laboratory test using a 5-story shear building model.

  13. SensorKit: An End-to-End Solution for Environmental Sensor Networking

    Science.gov (United States)

    Silva, F.; Graham, E.; Deschon, A.; Lam, Y.; Goldman, J.; Wroclawski, J.; Kaiser, W.; Benzel, T.

    2008-12-01

    Modern day sensor network technology has shown great promise to transform environmental data collection. However, despite the promise, these systems have remained the purview of the engineers and computer scientists who design them rather than a useful tool for the environmental scientists who need them. SensorKit is conceived of as a way to make wireless sensor networks accessible to The People: it is an advanced, powerful tool for sensor data collection that does not require advanced technological know-how. We are aiming to make wireless sensor networks for environmental science as simple as setting up a standard home computer network by providing simple, tested configurations of commercially-available hardware, free and easy-to-use software, and step-by-step tutorials. We designed and built SensorKit using a simplicity-through-sophistication approach, supplying users a powerful sensor to database end-to-end system with a simple and intuitive user interface. Our objective in building SensorKit was to make the prospect of using environmental sensor networks as simple as possible. We built SensorKit from off the shelf hardware components, using the Compact RIO platform from National Instruments for data acquisition due to its modular architecture and flexibility to support a large number of sensor types. In SensorKit, we support various types of analog, digital and networked sensors. Our modular software architecture allows us to abstract sensor details and provide users a common way to acquire data and to command different types of sensors. SensorKit is built on top of the Sensor Processing and Acquisition Network (SPAN), a modular framework for acquiring data in the field, moving it reliably to the scientist institution, and storing it in an easily-accessible database. SPAN allows real-time access to the data in the field by providing various options for long haul communication, such as cellular and satellite links. Our system also features reliable data storage

  14. Thresholded Range Aggregation in Sensor Networks

    DEFF Research Database (Denmark)

    Yiu, Man Lung; Lin, Zhifeng; Mamoulis, Nikos

    2010-01-01

    called thresholded range aggregate query (TRA), which retrieves the IDs of the sensors for which the average measurement in their neighborhood exceeds a user-given threshold. This query provides results that they are robust against individual sensor abnormality, and yet precisely summarize the sensors......' status in each local region. In order to process the (snapshot) TRA query, we develop energy-efficient protocols based on appropriate operators and filters in sensor nodes. The design of these operators and filters is non-trivial, due to the fact that each sensor measurement influences the actual results...

  15. Secure and self-stabilizing clock synchronization in sensor networks

    NARCIS (Netherlands)

    Hoepman, J.H.; Larsson, A.; Schiller, E.M.; Tsigas, P.

    2007-01-01

    In sensor networks, correct clocks have arbitrary starting offsets and nondeterministic fluctuating skews. We consider an adversary that aims at tampering with the clock synchronization by intercepting messages, replaying intercepted messages (after the adversary's choice of delay), and capturing no

  16. Ten Years of Cooperation Between Mobile Robots and Sensor Networks

    Directory of Open Access Journals (Sweden)

    Jesus Capitán Fernández

    2015-06-01

    Full Text Available This paper presents an overview of the work carried out by the Group of Robotics, Vision and Control (GRVC at the University of Seville on the cooperation between mobile robots and sensor networks. The GRVC, led by Professor Anibal Ollero, has been working over the last ten years on techniques where robots and sensor networks exploit synergies and collaborate tightly, developing numerous research projects on the topic. In this paper, based on our research, we introduce what we consider some relevant challenges when combining sensor networks with mobile robots. Then, we describe our developed techniques and main results for these challenges. In particular, the paper focuses on autonomous self-deployment of sensor networks; cooperative localization and tracking; self-localization and mapping; and large-scale scenarios. Extensive experimental results and lessons learnt are also discussed in the paper.

  17. Dependable k-coverage algorithms for sensor networks

    CERN Document Server

    Gyula, Simon; Gonczy, Laszlo; Cousin, Bernard

    2007-01-01

    Redundant sensing capabilities are often required in sensor network applications due to various reasons, e.g. robustness, fault tolerance, or increased accuracy. At the same time high sensor redundancy offers the possibility of increasing network lifetime by scheduling sleep intervals for some sensors and still providing continuous service with help of the remaining active sensors. In this paper centralized and distributed algorithms are proposed to solve the k-coverage sensing problem and maximize network lifetime. When physically possible, the proposed robust Controlled Greedy Sleep Algorithm provides guaranteed service independently of node and communication errors in the network. The performance of the algorithm is illustrated and compared to results of a random solution by simulation examples.

  18. Ten Years of Cooperation Between Mobile Robots and Sensor Networks

    Directory of Open Access Journals (Sweden)

    Jesus Capitán Fernández

    2015-06-01

    Full Text Available This paper presents an overview of the work carried out by the Group of Robotics, Vision and Control (GRVC at the University of Seville on the cooperation between mobile robots and sensor networks. The GRVC, led by Professor Anibal Ollero, has been working over the last ten years on techniques where robots and sensor networks exploit synergies and collaborate tightly, developing numerous research projects on the topic. In this paper, based on our research, we introduce what we consider some relevant challenges when combining sensor networks with mobile robots. Then, we describe our developed techniques and main results for these challenges. In particular, the paper focuses on autonomous self-deployment of sensor networks; cooperative localization and tracking; self-localization and mapping; and large-scale scenarios. Extensive experimental results and lessons learnt are also discussed in the paper.

  19. Whitelists Based Multiple Filtering Techniques in SCADA Sensor Networks

    Directory of Open Access Journals (Sweden)

    DongHo Kang

    2014-01-01

    Full Text Available Internet of Things (IoT consists of several tiny devices connected together to form a collaborative computing environment. Recently IoT technologies begin to merge with supervisory control and data acquisition (SCADA sensor networks to more efficiently gather and analyze real-time data from sensors in industrial environments. But SCADA sensor networks are becoming more and more vulnerable to cyber-attacks due to increased connectivity. To safely adopt IoT technologies in the SCADA environments, it is important to improve the security of SCADA sensor networks. In this paper we propose a multiple filtering technique based on whitelists to detect illegitimate packets. Our proposed system detects the traffic of network and application protocol attacks with a set of whitelists collected from normal traffic.

  20. Helicopter Rotor Blade Monitoring using Autonomous Wireless Sensor Network

    NARCIS (Netherlands)

    Sanchez Ramirez, Andrea; Loendersloot, Richard; Tinga, Tiedo; Basu, B.

    2013-01-01

    The advancement on Wireless Sensor Networks for vibration monitoring presents important possibilities for helicopter rotor health and usage monitoring. While main rotor blades account for the main source of lift for helicopters, rotor induced vibration establishes an important source for