WorldWideScience

Sample records for dendritic building blocks

  1. Appropriate schemata and building blocks

    Institute of Scientific and Technical Information of China (English)

    Yang Haijun; Li Minqiang

    2005-01-01

    Appropriate schemata as a novel concept to characterize building blocks are introduced, and then, the traits of appropriate schemata are presented. The effects of building blocks by search operators are analyzed. Hence, the experiments on RR-8X8 are employed to verify that appropriate schemata construct the building blocks. The validity of appropriate schemata and building blocks from the views of theory and practice is presented.

  2. Spintronics: Conceptual Building Blocks

    Science.gov (United States)

    Ansermet, J.-Ph.

    The purpose of this introduction to spintronics is to provide some elementary description of its conceptual building blocks. Thus, it is intended for a newcomer to the field. After recalling rudimentary descriptions of spin precession and spin relaxation, spin-dependent transport is treated within the Boltzmann formalism. This suffices to introduce key notions such as the spin asymmetry of the conductivities in the two-current model, the spin diffusion length, and spin accumulation. Two basic mechanisms of spin relaxation are then presented, one arising from spin-orbit scattering and the other from electron-magnon collisions. Finally, the action of a spin-polarized current on magnetization is presented in a thermodynamics framework. This introduces the notion of spin torque and the characteristic length scale over which the transverse spin polarization of conduction electron decays as it is injected into a magnet.

  3. Photovoltaic building blocks

    DEFF Research Database (Denmark)

    Hanberg, Peter Jesper; Jørgensen, Anders Michael

    2014-01-01

    it directcompetitive with fossil energy sources a further reduction is needed. By increasing the efficiency of the solar cells one gain an advantage through the whole chain of cost. So that per produced Watt of power less material is spent, installation costs are lower, less area is used etc. With an average...... efficiency of about 15% for commercial Silicon solar cells there is still much to gain. DTU Danchip provides research facilities, equipment and expertise for the building blocks that comprises fabricating the efficient solar cell. In order to get more of the sun light into the device we provide thin film......Photovoltaics (PV), better known as solar cells, are now a common day sight on many rooftops in Denmark.The installed capacity of PV systems worldwide is growing exponentially1 and is the third most importantrenewable energy source today. The cost of PV is decreasing fast with ~10%/year but to make...

  4. A Novel Tetrathiafulvalene Building Block

    DEFF Research Database (Denmark)

    Jeppesen, Jan Oskar; Takimiya, Kazuo; Thorup, Niels

    1999-01-01

    Efficient synthesis of a novel tetrathiafulvalene building block. 2,3-bis(2-cyanoethylthio)-6,7-bis(thiocyanato-methyl)tetrathiafulv alene (7) useful for stepwise and asymmetrical bis-function-alization is reported.......Efficient synthesis of a novel tetrathiafulvalene building block. 2,3-bis(2-cyanoethylthio)-6,7-bis(thiocyanato-methyl)tetrathiafulv alene (7) useful for stepwise and asymmetrical bis-function-alization is reported....

  5. Building Blocks for Personal Brands

    Science.gov (United States)

    Thomas, Lisa Carlucci

    2011-01-01

    In this article, the author discusses the four essential building blocks for personal brands: (1) name; (2) message; (3) channels; and (4) bridges. However, outstanding building materials can only take a person so far. The author emphasizes that vision, determination, faith, a sense of humor, and humility are also required.

  6. Building-block selectivity of polyketide synthases.

    Science.gov (United States)

    Liou, Grace F; Khosla, Chaitan

    2003-04-01

    For the past decade, polyketide synthases have presented an exciting paradigm for the controlled manipulation of complex natural product structure. These multifunctional enzymes catalyze the biosynthesis of polyketide natural products by stepwise condensation and modification of metabolically derived building blocks. In particular, regioselective modification of polyketide structure is possible by alterations in either intracellular acyl-CoA pools or, more commonly, by manipulation of acyl transferases that act as the primary gatekeepers for building blocks.

  7. Building Blocks of the Universe

    CERN Document Server

    The ATLAS collaboration

    2015-01-01

    This article presents possibilities to impart knowledge of and enthusiasm for particle physics to essentially all non-expert target audiences by the use of LEGO bricks and models of particle physics experiments built from these. Methods of using LEGO models, both as a passive exhibit and as part of interactive outreach events, are presented, along with a historical review of the “Build Your Own Particle Detector” programme and the corresponding idea of hosting competitions in building detector models in LEGO pieces as a perfect setting to grasp people’s attention, get them involved and ultimately convey knowledge in particle physics to them.

  8. Understanding dwarf galaxies as galactic building blocks

    CERN Document Server

    Tosi, M P

    2003-01-01

    This is a summary of a general discussion held during the third EuroConference on galaxy evolution. Various observational features of the stellar populations in present--day dwarf galaxies were presented to introduce the discussion on the possibility that these systems be the main building blocks of spiral and elliptical galaxies. Many people in the audience turned out to think that the inconsistencies among the observed properties of large and dwarf galaxies are too many to believe that the former are built up only by means of successive accretions of the latter. However, theorists of hierarchical galaxy formation suggested that present--day dwarfs are not representative of the galactic building blocks, which may be completely invisible nowadays. Some of them suggested that, contrary to what is usually assumed in hierarchical modelling, the actual building blocks were still fully gaseous systems when their major mergers occurred. If this is the case, then most of the inconsistencies can be overcome, and the ...

  9. Synthesis of Dendritic-Linear Block Copolymers by Atom Transfer Radical Polymerization

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The dendritic polyarylether 2-bromoisobutyrate as the macromolecular initiator for the controlled free radical polymerization of styrene was investigated. The polymerization was carried out with CuBr/2,2′-bipyridine catalyst at 110℃. It is found that the hybrid dendritic-linear block copolymers possess well-defined molecular weights and low polydispersities.

  10. Building Blocks for Control System Software

    NARCIS (Netherlands)

    Broenink, Johannes F.; Hilderink, G.H.; Amerongen van, J.; Jonker, B.; Regtien, P.P.L

    2001-01-01

    Software implementation of control laws for industrial systems seem straightforward, but is not. The computer code stemming from the control laws is mostly not more than 10 to 30% of the total. A building-block approach for embedded control system development is advocated to enable a fast and effici

  11. Porous polymers based on aryleneethynylene building blocks.

    Science.gov (United States)

    Bunz, Uwe H F; Seehafer, Kai; Geyer, Florian L; Bender, Markus; Braun, Ingo; Smarsly, Emanuel; Freudenberg, Jan

    2014-09-01

    Porous conjugated polymers are synthesized by metal-catalyzed coupling reactions. The progress for porous polymers when planar or tetrahedral building blocks are connected by alkyne units into novel materials is highlighted. The most prominent reaction for the buildup of the microporous alkyne-bridged polymers is the Sonogashira reaction, connecting alkynes to aromatic iodides or bromides. The availability of the building blocks and the potency of the Sonogashira reaction allow preparing a large variety of intrinsically porous polymeric materials, in which rigid struts connect multipronged centers. The microporous polymers are used as catalysts and as storage materials for gases and sensors. Postfunctionalization schemes, understanding of structure-property relationships, and the quest for high porosity are pertinent.

  12. Essential Building Blocks of Human Nature

    CERN Document Server

    Frey, Ulrich J; Willführ, Kai P

    2011-01-01

    To understand why we humans are as we are, it is necessary to look at the essential building blocks that comprise our nature. The foundations of this structure are our evolutionary origins as primates and our social roots. Upon these rest features such as our emotions, language and aesthetic preferences, with our self-perceptions, self-deceptions and thirst for knowledge right at the top. The unifying force holding these blocks together is evolutionary theory. Evolution provides a deeper understanding of human nature and, in particular, of the common roots of these different perspectives. To build a reliable and coherent model of man, leading authors from fields as diverse as primatology, anthropology, neurobiology and philosophy have joined forces to present essays  each describing their own expert perspective. Together they provide a convincing and complete picture of our own human nature.

  13. Subsea building blocks for slender wells

    Energy Technology Data Exchange (ETDEWEB)

    Sabedotti, Sergio

    2010-07-01

    Reduce the Life Cycle Cost (LCC), IOR and improve HSE are fundamental aspects in future subsea field developments. The SBB (Subsea Building Blocks) is an R D effort from Statoil and Aker Solutions to investigate and develop new technology that can allow the industry to achieve these objectives. One important aspect of this initiative is well construction and reduced rig time for drilling, completion and intervention of subsea wells. To enable a slender system and increase the operational flexibility, well equipment (WH, XMT) has been analyzed and redesigned. (Author)

  14. Building blocks for correlated superconductors and magnets

    Directory of Open Access Journals (Sweden)

    J. L. Sarrao

    2015-04-01

    Full Text Available Recent efforts at Los Alamos to discover strongly correlated superconductors and hard ferromagnets are reviewed. While serendipity remains a principal engine of materials discovery, design principles and structural building blocks are beginning to emerge that hold potential for predictive discovery. Successes over the last decade with the so-called “115” strongly correlated superconductors are summarized, and more recent efforts to translate these insights and principles to novel hard magnets are discussed. While true “materials by design” remains a distant aspiration, progress is being made in coupling empirical design principles to electronic structure simulation to accelerate and guide materials design and synthesis.

  15. Building blocks for correlated superconductors and magnets

    Energy Technology Data Exchange (ETDEWEB)

    Sarrao, J. L.; Ronning, F.; Bauer, E. D.; Batista, C. D.; Zhu, J.-X.; Thompson, J. D. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

    2015-04-01

    Recent efforts at Los Alamos to discover strongly correlated superconductors and hard ferromagnets are reviewed. While serendipity remains a principal engine of materials discovery, design principles and structural building blocks are beginning to emerge that hold potential for predictive discovery. Successes over the last decade with the so-called “115” strongly correlated superconductors are summarized, and more recent efforts to translate these insights and principles to novel hard magnets are discussed. While true “materials by design” remains a distant aspiration, progress is being made in coupling empirical design principles to electronic structure simulation to accelerate and guide materials design and synthesis.

  16. Birth of a nanoscience building block.

    Science.gov (United States)

    Alivisatos, A Paul

    2008-08-01

    The first Kavli Prize in Nanoscience has recognized two giants of the field, Louis Brus and Sumio Ijima, who have helped to lay the foundation of the field of nanoscience through their efforts to develop two of the most fundamental nanoscience building blocks: colloidal quantum dots and the carbon nanotube. In this Focus, I provide a brief history on the birth of the field of semiconductor nanoparticles, or quantum dots, and outline the contributions that Louis Brus has made in this area, which have served to advance the field of nanoscience in vast and far-reaching ways.

  17. Topology optimised planar photonic crystal building blocks

    DEFF Research Database (Denmark)

    Frandsen, Lars Hagedorn; Hede, K. K.; Borel, Peter Ingo

    A photonic crystal waveguide (PhCW) 1x4 splitter has been constructed from PhCW 60° bends1 and Y-splitters2 that have been designed individually by utilising topology optimisation3. The splitter has been fabricated in a silicon-on-insulator material (Fig. 1) and exhibits a broadband splitting...... for the TE-polarisation with an average excess loss of 1.55±0.54 dB for a 110 nm bandwidth. The 1x4 splitter demonstrates that individual topology-optimised parts can be used as building blocks to realise high-performance nanophotonic circuits. 1L. H. Frandsen et al., Opt. Express 12, 5916-5921 (2004) 2P. I...

  18. Alkoxyallenes as building blocks for organic synthesis.

    Science.gov (United States)

    Zimmer, Reinhold; Reissig, Hans-Ulrich

    2014-05-01

    Alkoxyallenes are unusually versatile C3 building blocks in organic synthesis. Hence this tutorial review summarizes the most important transformations, including subsequent reactions and their applications in the synthesis of relevant compounds, e.g. natural products. The reactivity patterns involved and the synthons derived from alkoxyallenes are presented. Often alkoxyallenes can serve as substitutes of acrolein or acrolein acetals, utilisation of which has already led to interesting products. Most important is the use of lithiated alkoxyallenes which smoothly react with a variety of electrophiles and lead to products with unique substitution patterns. The heterocycles or carbocycles formed are intermediates for the stereoselective synthesis of natural products or for the preparation of other structurally relevant compounds. The different synthons being put into practice by the use of lithiated alkoxyallenes in these variations will be discussed.

  19. Multi-Block Enhancement for Lagrangian Dendritic Mesh setup in Altair5

    Energy Technology Data Exchange (ETDEWEB)

    Douglass, Rodney W [Los Alamos National Laboratory

    2010-12-15

    Initial mesh setup for an ASC mUlti-physics code at LANL is done using Altair5. Altair5 assumes that the final mesh is composed of logical structured mesh blocks linked together at mesh boundaries to form, ultimately, an unstructured mesh. Within these blocks, meshes may have dendrites, that is, local regions where two zones share common edges (in two-dimensions, or faces in three-dimensions) with a single zone. In many cases, contiguous subsets of the initial set of blocks may have the same material assigned to them, but without smoothing the mesh would form a computationally challenging initial mesh. Some of these blocks may also have zones with nodes on domain boundaries. This paper reports on the implementation of multiblock smoothing in Altair5, which allows for dendrites and for moving boundary nodes. Dendritic nodes are constrained to be located at the average of their neighbor nodes while boundary nodes are constrained to move along the boundary geometry. Two fundamentally different smoothing methods were implemented. First, a variational principle is presented that balances zonal size and distortion via a user selected weighting with constraints imposed using penalty methods for dendritic nodes and Lagrange multipliers for boundary nodes. Second, the Laplace-Beltrami smoother is presented. This is a general elliptic smoother which can easily be modified to give Laplacian and Winslow-Crowley mesh smoothing. Results are shown for several test meshes of interest.

  20. Galactic Building Blocks Seen Swarming Around Andromeda

    Science.gov (United States)

    2004-02-01

    Green Bank, WV - A team of astronomers using the National Science Foundation's Robert C. Byrd Green Bank Telescope (GBT) has made the first conclusive detection of what appear to be the leftover building blocks of galaxy formation -- neutral hydrogen clouds -- swarming around the Andromeda Galaxy, the nearest large spiral galaxy to the Milky Way. This discovery may help scientists understand the structure and evolution of the Milky Way and all spiral galaxies. It also may help explain why certain young stars in mature galaxies are surprisingly bereft of the heavy elements that their contemporaries contain. Andromeda Galaxy This image depicts several long-sought galactic "building blocks" in orbit of the Andromeda Galaxy (M31). The newfound hydrogen clouds are depicted in a shade of orange (GBT), while gas that comprises the massive hydrogen disk of Andromeda is shown at high-resolution in blue (Westerbork Sythesis Radio Telescope). CREDIT: NRAO/AUI/NSF, WSRT (Click on Image for Larger Version) "Giant galaxies, like Andromeda and our own Milky Way, are thought to form through repeated mergers with smaller galaxies and through the accretion of vast numbers of even lower mass 'clouds' -- dark objects that lack stars and even are too small to call galaxies," said David A. Thilker of the Johns Hopkins University in Baltimore, Maryland. "Theoretical studies predict that this process of galactic growth continues today, but astronomers have been unable to detect the expected low mass 'building blocks' falling into nearby galaxies, until now." Thilker's research is published in the Astrophysical Journal Letters. Other contributors include: Robert Braun of the Netherlands Foundation for Research in Astronomy; Rene A.M. Walterbos of New Mexico State University; Edvige Corbelli of the Osservatorio Astrofisico di Arcetri in Italy; Felix J. Lockman and Ronald Maddalena of the National Radio Astronomy Observatory (NRAO) in Green Bank, West Virginia; and Edward Murphy of the

  1. Identification of critical technology building blocks

    DEFF Research Database (Denmark)

    Ravn, Poul Martin; Mortensen, Niels Henrik; Hvam, Lars

    2017-01-01

    In order to have a better base for decisions, R&D managers need to know what the critical areas of development are in relation to the technologies they develop, mature, and include in the portfolio. As most of the technologies in a company have the potential to have a significant impact on compet......In order to have a better base for decisions, R&D managers need to know what the critical areas of development are in relation to the technologies they develop, mature, and include in the portfolio. As most of the technologies in a company have the potential to have a significant impact...... on competition, the challenge is to know how to identify and prioritize the development tasks. If possible, an effective strategy can be defined. This article suggests a framework for identification and analysis of a product portfolio, with special emphasis on identifying critical technology building blocks...... based on reasoning about product properties. Current approaches lack such views, and by focusing on these, potential make or break decisions are better supported. It is suggested to adopt the proposed framework to clarify where in the portfolio the technology needs critical attention for the next...

  2. Building Blocks: Enmeshing Technology and Creativity with Artistic Pedagogical Technologies

    Science.gov (United States)

    Janzen, Katherine J.; Perry, Beth; Edwards, Margaret

    2017-01-01

    Using the analogy of children's building blocks, the reader is guided through the results of a research study that explored the use of three Artistic Pedagogical Technologies (APTs). "Building blocks" was the major theme that emerged from the data. Sub-themes included developing community, enhancing creativity, and risk taking. The…

  3. Explicit filtering of building blocks for genetic algorithms

    NARCIS (Netherlands)

    Kemenade, C.H.M. van

    1996-01-01

    Genetic algorithms are often applied to building block problems. We have developed a simple filtering algorithm that can locate building blocks within a bit-string, and does not make assumptions regarding the linkage of the bits. A comparison between the filtering algorithm and genetic algorithms re

  4. Explicit filtering of building blocks for genetic algorithms

    NARCIS (Netherlands)

    C.H.M. van Kemenade

    1996-01-01

    textabstractGenetic algorithms are often applied to building block problems. We have developed a simple filtering algorithm that can locate building blocks within a bit-string, and does not make assumptions regarding the linkage of the bits. A comparison between the filtering algorithm and genetic

  5. Trihaloethenes as versatile building blocks for organic synthesis.

    Science.gov (United States)

    Grossmann, Adriana S; Magauer, Thomas

    2016-06-15

    This review highlights the chemistry of trihaloethene building blocks with a special focus on commercially available 1,1,2-trichloroethene. The topics surveyed herein include the use of trihaloethenes as C2-building blocks for transition metal-catalyzed coupling reactions, addition, elimination and cycloaddition reactions as well as natural product syntheses.

  6. A facile building-block synthesis of multifunctional lanthanide MOFs

    NARCIS (Netherlands)

    Tanase, S.; Mittelmeijer-Hazeleger, M.C.; Rothenberg, G.; Mathonière, C.; Jubera, V.; Smits, J.M.M.; de Gelder, R.

    2011-01-01

    We report a building blocks approach providing a direct route to multifunctional MOFs, that display photoluminescent properties, robustness, porosity and in some cases unique magnetic properties. The self-assembly of [Mo(CN)8]4− with several in situ prepared lanthanide building blocks gives 3D

  7. Data Policy Construction Set - Building Blocks from Childhood Constructions

    Science.gov (United States)

    Fleischer, Dirk; Paul-Stueve, Thilo; Jobmann, Alexandra; Farrenkopf, Stefan

    2016-04-01

    A complete construction set of building blocks usually comes with instructions and these instruction include building stages. The products of these building stages usually build from very general parts become highly specialized building parts for very unique features of the whole construction model. This sounds very much like the construction or organization of an interdisciplinary research project, institution or association, doesn't it! The creation process of an overarching data policy for a project group or institution is exactly the combination of individual interests with the common goal of a collaborative data policy and can be compared with the building stages of a construction set of building blocks and the building instructions. Keeping this in mind we created the data policy construction set of textual building blocks. This construction set is subdivided into several building stages or parts each containing multiple building blocks as text blocks. By combining building blocks of all subdivisions it is supposed to create a cascading data policy document. Cascading from the top level as a construction set provider for all further down existing levels such as project, themes, work packages or Universities, faculties, institutes down to the working level of working groups. The working groups are picking from the remaining building blocks in the provided construction set the suitable blocks for its working procedures to create a very specific policy from the available construction set provided by the top level community. Nevertheless, if a working group realized that there are missing building blocks or worse that there are missing building parts, then they have the chance to add the missing pieces to the construction set of direct an future use. This cascading approach enables project or institution wide application of the encoded rules from the textual level on access to data storage infrastructure. This structured approach is flexible enough to allow for

  8. NANOSTRUCTURED METAL OXIDE CATALYSTS VIA BUILDING BLOCK SYNTHESES

    Energy Technology Data Exchange (ETDEWEB)

    Craig E. Barnes

    2013-03-05

    A broadly applicable methodology has been developed to prepare new single site catalysts on silica supports. This methodology requires of three critical components: a rigid building block that will be the main structural and compositional component of the support matrix; a family of linking reagents that will be used to insert active metals into the matrix as well as cross link building blocks into a three dimensional matrix; and a clean coupling reaction that will connect building blocks and linking agents together in a controlled fashion. The final piece of conceptual strategy at the center of this methodology involves dosing the building block with known amounts of linking agents so that the targeted connectivity of a linking center to surrounding building blocks is obtained. Achieving targeted connectivities around catalytically active metals in these building block matrices is a critical element of the strategy by which single site catalysts are obtained. This methodology has been demonstrated with a model system involving only silicon and then with two metal-containing systems (titanium and vanadium). The effect that connectivity has on the reactivity of atomically dispersed titanium sites in silica building block matrices has been investigated in the selective oxidation of phenols to benezoquinones. 2-connected titanium sites are found to be five times as active (i.e. initial turnover frequencies) than 4-connected titanium sites (i.e. framework titanium sites).

  9. New building blocks or dendritic pseudopeptides for metal chelating

    National Research Council Canada - National Science Library

    Ruan, Min; Nicolas, Irène; Baudy-Floc’h, Michèle

    2016-01-01

    ...+-nitrilotriacetic acid moieties which could target histidine rich peptides or proteins. Depending on the nature of these new chemical recognition units, they could be integrated into a peptide by coupling in C or N-termini. Graphical abstract...

  10. Dendrimers and Dendrons as Versatile Building Blocks for the Fabrication of Functional Hydrogels

    Directory of Open Access Journals (Sweden)

    Sadik Kaga

    2016-04-01

    Full Text Available Hydrogels have emerged as a versatile class of polymeric materials with a wide range of applications in biomedical sciences. The judicious choice of hydrogel precursors allows one to introduce the necessary attributes to these materials that dictate their performance towards intended applications. Traditionally, hydrogels were fabricated using either polymerization of monomers or through crosslinking of polymers. In recent years, dendrimers and dendrons have been employed as well-defined building blocks in these materials. The multivalent and multifunctional nature of dendritic constructs offers advantages in either formulation or the physical and chemical properties of the obtained hydrogels. This review highlights various approaches utilized for the fabrication of hydrogels using well-defined dendrimers, dendrons and their polymeric conjugates. Examples from recent literature are chosen to illustrate the wide variety of hydrogels that have been designed using dendrimer- and dendron-based building blocks for applications, such as sensing, drug delivery and tissue engineering.

  11. Dendrimers and Dendrons as Versatile Building Blocks for the Fabrication of Functional Hydrogels.

    Science.gov (United States)

    Kaga, Sadik; Arslan, Mehmet; Sanyal, Rana; Sanyal, Amitav

    2016-04-15

    Hydrogels have emerged as a versatile class of polymeric materials with a wide range of applications in biomedical sciences. The judicious choice of hydrogel precursors allows one to introduce the necessary attributes to these materials that dictate their performance towards intended applications. Traditionally, hydrogels were fabricated using either polymerization of monomers or through crosslinking of polymers. In recent years, dendrimers and dendrons have been employed as well-defined building blocks in these materials. The multivalent and multifunctional nature of dendritic constructs offers advantages in either formulation or the physical and chemical properties of the obtained hydrogels. This review highlights various approaches utilized for the fabrication of hydrogels using well-defined dendrimers, dendrons and their polymeric conjugates. Examples from recent literature are chosen to illustrate the wide variety of hydrogels that have been designed using dendrimer- and dendron-based building blocks for applications, such as sensing, drug delivery and tissue engineering.

  12. The building blocks to the architecture of a cloud platform

    CSIR Research Space (South Africa)

    Mvelase, P

    2015-07-01

    Full Text Available This research is on the identification of components that are general across cloud platforms. These components are classified under hardware, virtualisation and cloud management. These building blocks encompass nodes and clusters, hypervisors...

  13. Installation of a modular building block photovoltaic concentrator array field

    Energy Technology Data Exchange (ETDEWEB)

    Sanders, J.A.; Cass, D.C.; Broadbent, S.

    1985-06-01

    A building block array field nominally rated at 25 kW has been installed in Albuquerque, New Mexico. The building block is a single source electrical circuit of six center pedestal two-axis tracking arrays connected in parallel and having a nominal operating voltage of 420 volts DC. Each array contains 60 point-focusing Fresnel lens photovoltaic concentrator modules connected in series for a nominal power output of 4.2 kW per array. The structural design uses a center pedestal two-axis cantilevered support tube with a closed loop sun sensor electronic control system. A master control provides manual override of the array field. The installation was accomplished without difficulty and demonstrated the ease of turnkey building block installation. The costs of 1 MW size fields is estimated to be $6.99 per watt installed based on the building block installation.

  14. Low Power Dendritic Computation for Wordspotting

    Directory of Open Access Journals (Sweden)

    Stephen Nease

    2013-05-01

    Full Text Available In this paper, we demonstrate how a network of dendrites can be used to build the state decoding block of a wordspotter similar to a Hidden Markov Model (HMM classifier structure. We present simulation and experimental data for a single line dendrite and also experimental results for a dendrite-based classifier structure. This work builds on previously demonstrated building blocks of a neural network: the channel, synapses and dendrites using CMOS circuits. These structures can be used for speech and pattern recognition. The computational efficiency of such a system is >10 MMACs/μW as compared to Digital Systems which perform 10 MMACs/mW.

  15. Customizable Visualizations with Formula-Linked Building Blocks

    DEFF Research Database (Denmark)

    Kuhail, Mohammad Amin; Lauesen, Søren

    . Visualization toolkits allow easier visualization creation in some cases, but customization and interaction are tedious. As an alternative, we developed uVis visualization tool that uses spreadsheet-like formulas to connect building blocks. uVis formulas can refer to building blocks and database tables. We......One approach to visualization construction is to use complex blocks (widgets) that are tailored for specific visualizations, and customize the visualizations by setting the properties of the widgets. This approach allows fast and easy visualization construction but falls short if the user wants...

  16. Sodium phosphaethynolate as a building block for heterocycles.

    Science.gov (United States)

    Chen, Xiaodan; Alidori, Simone; Puschmann, Florian Frank; Santiso-Quinones, Gustavo; Benkő, Zoltán; Li, Zhongshu; Becker, Gerd; Grützmacher, Hans-Friedrich; Grützmacher, Hansjörg

    2014-02-03

    Phosphorus-containing heterocycles have evolved from laboratory curiosities to functional components, such as ligands in catalytically active metal complexes or molecular constituents in electronic devices. The straightforward synthesis of functionalized heterocycles on a larger scale remains a challenge. Herein, we report the use of the phosphaethynolate (OCP)(-) anion as a building block for various sterically unprotected and functionalized hydroxy substituted phosphorus heterocycles. Because the resulting heterocycles are themselves anions, they are building blocks in their own right and allow further facile functionalization. This property may be of interest in coordination chemistry and material science.

  17. Customizable Visualizations with Formula-Linked Building Blocks

    DEFF Research Database (Denmark)

    Kuhail, Mohammad Amin; Lauesen, Søren

    different appearance or behavior than what the widgets support. Another approach is to combine primitive graphical elements using traditional programming or visualization toolkits. Traditional programming allows high customizability, but it is time consuming and hard to develop advanced visualizations....... Visualization toolkits allow easier visualization creation in some cases, but customization and interaction are tedious. As an alternative, we developed uVis visualization tool that uses spreadsheet-like formulas to connect building blocks. uVis formulas can refer to building blocks and database tables. We...

  18. Rigid Biobased Building Blocks: Current Developments and Outlook

    NARCIS (Netherlands)

    Es, van D.S.

    2013-01-01

    In this perspectives paper we will look at the state-of-the-art in rigid renewable building blocks for biobased materials, with a focus on two types of carbohydrate-based difunctional monomers, i.e.,isohexides and furan-2,5-dicarboxylic acid (FDCA).

  19. Building Blocks of the Milky Way's Accreted Spheroid

    CERN Document Server

    van Oirschot, Pim; Helmi, Amina; Nelemans, Gijs

    2016-01-01

    In the $\\Lambda$CDM model of structure formation, a stellar spheroid grows by the assembly of smaller galaxies, the so-called building blocks. Combining the Munich-Groningen semi-analytical model of galaxy formation with the high resolution Aquarius simulations of dark matter haloes, we study the assembly history of the stellar spheroids of six Milky Way-mass galaxies, focussing on building block properties such as mass, age and metallicity. These properties are compared to those of the surviving satellites in the same models. We find that the building blocks have higher star formation rates on average, and this is especially the case for the more massive objects. At high redshift these dominate in star formation over the satellites, whose star formation timescales are longer on average. These differences ought to result in a larger $\\alpha$-element enhancement from Type II supernovae in the building blocks (compared to the satellites) by the time Type Ia supernovae would start to enrich them in iron, explain...

  20. Linked supramolecular building blocks for enhanced cluster formation

    DEFF Research Database (Denmark)

    McLellan, Ross; Palacios, Maria A.; Beavers, Christine M.;

    2015-01-01

    (Figure Presented). Methylene-bridged calix[4]arenes have emerged as extremely versatile ligand supports in the formation of new polymetallic clusters possessing fascinating magnetic properties. Metal ion binding rules established for this building block allow one to partially rationalise the com...

  1. Building blocks of the Milky Way's accreted spheroid

    NARCIS (Netherlands)

    van Oirschot, Pim; Starkenburg, Else; Helmi, Amina; Nelemans, Gijs

    2017-01-01

    In the $\\Lambda$CDM model of structure formation, a stellar spheroid grows by the assembly of smaller galaxies, the so-called building blocks. Combining the Munich-Groningen semi-analytical model of galaxy formation with the high resolution Aquarius simulations of dark matter haloes, we study the

  2. Linked supramolecular building blocks for enhanced cluster formation

    DEFF Research Database (Denmark)

    McLellan, Ross; Palacios, Maria A.; Beavers, Christine M.

    2015-01-01

    (Figure Presented). Methylene-bridged calix[4]arenes have emerged as extremely versatile ligand supports in the formation of new polymetallic clusters possessing fascinating magnetic properties. Metal ion binding rules established for this building block allow one to partially rationalise the com...

  3. SiGe Building Blocks for Microwave Frequency Synthesizers

    OpenAIRE

    Vaucher, Cicero S.; Apostolidou, M; Farrugia, Andrew; Praamsma, Louis

    2004-01-01

    Implementations of Ku- and Ka-band PLL building blocks in the Philips QUBiC4G SiGe technology are presented: a 10 GHz fully-integrated low-phase-noise differential Colpttis oscillator, a 25 GHz low-power adaptive prescaler, and a 18 GHz truly-modular fully-programmable frequency divider.

  4. Building blocks of the Milky Way's accreted spheroid

    NARCIS (Netherlands)

    van Oirschot, Pim; Starkenburg, Else; Helmi, Amina; Nelemans, Gijs

    2017-01-01

    In the $\\Lambda$CDM model of structure formation, a stellar spheroid grows by the assembly of smaller galaxies, the so-called building blocks. Combining the Munich-Groningen semi-analytical model of galaxy formation with the high resolution Aquarius simulations of dark matter haloes, we study the as

  5. Strategies for Controlled Placement of Nanoscale Building Blocks

    Directory of Open Access Journals (Sweden)

    Koh SeongJin

    2007-01-01

    Full Text Available AbstractThe capability of placing individual nanoscale building blocks on exact substrate locations in a controlled manner is one of the key requirements to realize future electronic, optical, and magnetic devices and sensors that are composed of such blocks. This article reviews some important advances in the strategies for controlled placement of nanoscale building blocks. In particular, we will overview template assisted placement that utilizes physical, molecular, or electrostatic templates, DNA-programmed assembly, placement using dielectrophoresis, approaches for non-close-packed assembly of spherical particles, and recent development of focused placement schemes including electrostatic funneling, focused placement via molecular gradient patterns, electrodynamic focusing of charged aerosols, and others.

  6. Internet of Things building blocks and business models

    CERN Document Server

    Hussain, Fatima

    2017-01-01

    This book describes the building blocks and introductory business models for Internet of Things (IoT). The author provide an overview of the entire IoT architecture and constituent layers, followed by detail description of each block . Various inter-connecting technologies and sensors are discussed in context of IoT networks. In addition to this, concepts of Big Data and Fog Computing are presented and characterized as per data generated by versatile IoT applications . Smart parking system and context aware services are presented as an hybrid model of cloud and Fog Afterwards, various IoT applications and respective business models are discussed. Finally, author summarizes the IoT building blocks and identify research issues in each, and suggest potential research projects worthy of pursuing. .

  7. Hydration effects on the electronic properties of eumelanin building blocks

    Science.gov (United States)

    Assis Oliveira, Leonardo Bruno; L. Fonseca, Tertius; Costa Cabral, Benedito J.; Coutinho, Kaline; Canuto, Sylvio

    2016-08-01

    Theoretical results for the electronic properties of eumelanin building blocks in the gas phase and water are presented. The building blocks presently investigated include the monomeric species DHI (5,6-dihydroxyindole) or hydroquinone (HQ), DHICA (5,6-dihydroxyindole-2-carboxylic acid), indolequinone (IQ), quinone methide (MQ), two covalently bonded dimers [HM ≡ HQ + MQ and IM ≡ IQ + MQ], and two tetramers [HMIM ≡ HQ + IM, IMIM ≡ IM + IM]. The electronic properties in water were determined by carrying out sequential Monte Carlo/time dependent density functional theory calculations. The results illustrate the role played by hydrogen bonding and electrostatic interactions in the electronic properties of eumelanin building blocks in a polar environment. In water, the dipole moments of monomeric species are significantly increased ([54-79]%) relative to their gas phase values. Recently, it has been proposed that the observed enhancement of the higher-energy absorption intensity in eumelanin can be explained by excitonic coupling among eumelanin protomolecules [C.-T. Chen et al., Nat. Commun. 5, 3859 (2014)]. Here, we are providing evidence that for DHICA, IQ, and HMIM, the electronic absorption toward the higher-energy end of the spectrum ([180-220] nm) is enhanced by long-range Coulombic interactions with the water environment. It was verified that by superposing the absorption spectra of different eumelanin building blocks corresponding to the monomers, dimers, and tetramers in liquid water, the behaviour of the experimental spectrum, which is characterised by a nearly monotonic decay from the ultraviolet to the infrared, is qualitatively reproduced. This result is in keeping with a "chemical disorder model," where the broadband absorption of eumelanin pigments is determined by the superposition of the spectra associated with the monomeric and oligomeric building blocks.

  8. HIV Blocks Interferon Induction in Human Dendritic Cells and Macrophages by Dysregulation of TBK1

    Science.gov (United States)

    Harman, Andrew N.; Nasr, Najla; Feetham, Alexandra; Galoyan, Ani; Alshehri, Abdullateef A.; Rambukwelle, Dharshini; Botting, Rachel A.; Hiener, Bonnie M.; Diefenbach, Eve; Diefenbach, Russell J.; Kim, Min; Mansell, Ashley

    2015-01-01

    ABSTRACT Dendritic cells (DCs) and macrophages are present in the tissues of the anogenital tract, where HIV-1 transmission occurs in almost all cases. These cells are both target cells for HIV-1 and represent the first opportunity for the virus to interfere with innate recognition. Previously we have shown that both cell types fail to produce type I interferons (IFNs) in response to HIV-1 but that, unlike T cells, the virus does not block IFN induction by targeting IFN regulatory factor 3 (IRF3) for cellular degradation. Thus, either HIV-1 inhibits IFN induction by an alternate mechanism or, less likely, these cells fail to sense HIV-1. Here we show that HIV-1 (but not herpes simplex virus 2 [HSV-2] or Sendai virus)-exposed DCs and macrophages fail to induce the expression of all known type I and III IFN genes. These cells do sense the virus, and pattern recognition receptor (PRR)-induced signaling pathways are triggered. The precise stage in the IFN-inducing signaling pathway that HIV-1 targets to block IFN induction was identified; phosphorylation but not K63 polyubiquitination of TANK-binding kinase 1 (TBK1) was completely inhibited. Two HIV-1 accessory proteins, Vpr and Vif, were shown to bind to TBK1, and their individual deletion partly restored IFN-β expression. Thus, the inhibition of TBK1 autophosphorylation by binding of these proteins appears to be the principal mechanism by which HIV-1 blocks type I and III IFN induction in myeloid cells. IMPORTANCE Dendritic cells (DCs) and macrophages are key HIV target cells. Therefore, definition of how HIV impairs innate immune responses to initially establish infection is essential to design preventative interventions, especially by restoring initial interferon production. Here we demonstrate how HIV-1 blocks interferon induction by inhibiting the function of a key kinase in the interferon signaling pathway, TBK1, via two different viral accessory proteins. Other viral proteins have been shown to target the

  9. Building houses with earth blocks: A guide for upgrading traditional building methods using handmade earth blocks

    CSIR Research Space (South Africa)

    Bolton, M

    2001-01-01

    Full Text Available This report is a guide to building strong earth houses that will last a long time but without having to spend a lot of extra money or hire outside experts to do the building. It supports the process of improving the quality of earth housing...

  10. THE USAGE OF FACEBOOK FUNCTIONAL BUILDING BLOCKS IN UNISEL

    Directory of Open Access Journals (Sweden)

    Latifah Abd Latib

    2015-08-01

    Full Text Available The emergence of Internet-based social media has made it possible for a personto communicate with thousands of other people to increase the communicationeffectiveness, collaboration among internal organization and knowledge sharing.By engaging employees through social media such as Facebook as a two-waycommunications tool, employers can reach a larger audience and build credibilitywith techno-savvy workers. Although it is clear that Facebook is a very powerfultool for communication, many employers are unable to identify the functionalityof Facebook in terms of developing strategies and to allocate the resourceseffectively. Taking this into account this study sought to identify the usage ofFacebook Functionality building blocks. This survey involved 55 academic staffsfrom the Faculty of Computer Science and Information Technology, Unisel. Theseven functional building blocks identified were Identity (M=3.39, Relationships(M=3.39, Groups (M=3.6, Presence (M=3.28, Sharing (M=3.06, andConversations (M=2.90, Reputation (M=2.05. This study suggests that theability to identify the functional building blocks itself is very important in anorganization in terms of developing their communication strategies. It is hopedthat the results of the study will be applicable to the instituition, current users,and potential users of Facebook.

  11. BUILDING BLOCKS: ENMESHING TECHNOLOGY AND CREATIVITY WITH ARTISTIC PEDAGOGICAL TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Katherine J.JANZEN

    2017-01-01

    Full Text Available Using the analogy of children’s building blocks, the reader is guided through the results of a research study that explored the use of three Artistic Pedagogical Technologies (APTs. ‘Building blocks’ was the major theme that emerged from the data. Sub-themes included developing community, enhancing creativity, and risk taking. The discourse of the paper centers on how selected APTs stimulate interaction, create social presence, and help develop community in the online post-secondary classroom. Additional findings are discussed and implications are presented.

  12. Synthesis of triamino acid building blocks with different lipophilicities.

    Directory of Open Access Journals (Sweden)

    Jyotirmoy Maity

    Full Text Available To obtain different amino acids with varying lipophilicity and that can carry up to three positive charges we have developed a number of new triamino acid building blocks. One set of building blocks was achieved by aminoethyl extension, via reductive amination, of the side chain of ortnithine, diaminopropanoic and diaminobutanoic acid. A second set of triamino acids with the aminoethyl extension having hydrocarbon side chains was synthesized from diaminobutanoic acid. The aldehydes needed for the extension by reductive amination were synthesized from the corresponding Fmoc-L-2-amino fatty acids in two steps. Reductive amination of these compounds with Boc-L-Dab-OH gave the C4-C8 alkyl-branched triamino acids. All triamino acids were subsequently Boc-protected at the formed secondary amine to make the monomers appropriate for the N-terminus position when performing Fmoc-based solid-phase peptide synthesis.

  13. Block assembly for global registration of building scans

    KAUST Repository

    Yan, Feilong

    2016-11-11

    We propose a framework for global registration of building scans. The first contribution of our work is to detect and use portals (e.g., doors and windows) to improve the local registration between two scans. Our second contribution is an optimization based on a linear integer programming formulation. We abstract each scan as a block and model the blocks registration as an optimization problem that aims at maximizing the overall matching score of the entire scene. We propose an efficient solution to this optimization problem by iteratively detecting and adding local constraints. We demonstrate the effectiveness of the proposed method on buildings of various styles and that our approach is superior to the current state of the art.

  14. Analogue Behavioral Modeling of Switched-Current Building Block Circuits

    Institute of Scientific and Technical Information of China (English)

    ZENG Xuan; WANG Wei; SHI Jianlei; TANG Pushan; D.ZHOU

    2001-01-01

    This paper proposes a behavioral modeling technique for the second-generation switched-current building block circuits. The proposed models are capable of capturing the non-ideal behavior of switched-current circuits, which includes the charge injection effects and device mismatch effects. As a result, system performance degradations due to the building block imperfections can be detected at the early design stage by fast behavioral simulations. To evaluate the accuracy of the proposed models, we developed a time-domain behavioral simulator. Experimental results have shown that compared with SPICE, the behavioral modeling error is less than 2.15%, while behavioral simulation speed up is 4 orders in time-domain.

  15. Development of a prototype self-configuring building block

    Science.gov (United States)

    Lin, Hung-Yu; Tsui, Chi-Leung; Wu, Wen-Jong; Wang, Wei-Chih

    2011-04-01

    The paper presents the concept and construction of a prototype self-configuring building block for potential application in smart dynamic structure. The design contains several modular self-configuring blocks with integrated controllers, gear trains, extending arms and magnetic latches. The structure could be reconfigured via the connection and disconnection of magnetic latch between the modules. Through the coordination of the individual cubes themselves, the entire structure can reassemble via pushing and pulling the individual components into almost any desired shape. Information as to the current location or the next necessary movement could be passed from cube to cube by a physical connection between the cubes or remotely through broadcast signals. To provide the hardware strategy, we present the mechanical design of the self-configure modules and their latch mechanism of Halbach array. In the end, we will discuss our proposed application in dynamic building structure and storage management.

  16. Synthesis of Chiral Building Blocks for Use in Drug Discovery

    Directory of Open Access Journals (Sweden)

    Rustum S. Boyce

    2004-05-01

    Full Text Available In the past decade there has been a significant growth in the sales of pharmaceutical drugs worldwide, but more importantly there has been a dramatic growth in the sales of single enantiomer drugs. The pharmaceutical industry has a rising demand for chiral intermediates and research reagents because of the continuing imperative to improve drug efficacy. This in turn impacts on researchers involved in preclinical discovery work. Besides traditional chiral pool and resolution of racemates as sources of chiral building blocks, many new synthetic methods including a great variety of catalytic reactions have been developed which facilitate the production of complex chiral drug candidates for clinical trials. The most ambitious technique is to synthesise homochiral compounds from non-chiral starting materials using chiral metal catalysts and related chemistry. Examples of the synthesis of chiral building blocks from achiral materials utilizing asymmetric hydrogenation and asymmetric epoxidation are presented.

  17. Building Blocks Propagation in Quantum-Inspired Genetic Algorithm

    OpenAIRE

    Nowotniak, Robert; Kucharski, Jacek

    2010-01-01

    This paper presents an analysis of building blocks propagation in Quantum-Inspired Genetic Algorithm, which belongs to a new class of metaheuristics drawing their inspiration from both biological evolution and unitary evolution of quantum systems. The expected number of quantum chromosomes matching a schema has been analyzed and a random variable corresponding to this issue has been introduced. The results have been compared with Simple Genetic Algorithm. Also, it has been presented how selec...

  18. Topology Optimization of Building Blocks for Photonic Integrated Circuits

    DEFF Research Database (Denmark)

    Jensen, Jakob Søndergaard; Sigmund, Ole

    2005-01-01

    Photonic integrated circuits are likely candidates as high speed replacements for the standard electrical integrated circuits of today. However, in order to obtain a satisfactorily performance many design prob- lems that up until now have resulted in too high losses must be resolved. In this work...... we demonstrate how the method of topology optimization can be used to design a variety of high performance building blocks for the future circuits....

  19. Carbon Nanotubes:from Nanoscale Building Blocks to Macrostructures

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    1 Results Carbon nanotubes (CNTs) have fascinating properties.In order to use these novel one-dimensional structures for applications such as in nano-electronic,nano-mechanical and electrochemical energy storage device and as structural elements in various composites,the structure of nanotubes needs to be tailored and various architectures and macroscale assembles have to be configured using nanotube building blocks.Nanotube macrostructures are macroscopically organized groups of CNTs,which are expecte...

  20. Introduction to Intel’s Threading Building Blocks

    OpenAIRE

    Yazdanmehr, Shayan

    2016-01-01

    Intel‘s Threading Building Blocks (Intel TBB) is a C++ template library for implementing task parallelism. This parallel programming approach enables scalable memory allocation and task scheduling. Therefore it suits well for implementing several parallel algorithms. Nevertheless, the achievable parallel performance by TBB for typical scenarios of scientific computing has so far not been systematically studied. Neither does there exist a careful comparison, with respect to the usability, betw...

  1. Building Blocks Incorporating Waste Materials Bound with Bitumen

    Directory of Open Access Journals (Sweden)

    Thanaya I.N.A.

    2010-01-01

    Full Text Available This paper described an investigation and evaluation which was carried out in the United Kingdom-UK, on the properties of masonry building block materials that incorporate waste materials, namely: steel slag, crushed glass, coal fly ash, rice husk ash (RHA, incinerator sewage sludge ash (ISSA, municipal solid waste incinerator bottom ash (MSWIBA or shortened as IBA, bound with bitumen or asphalt, named as Bitublock. The binder used was 50 pen bitumen. The properties of the blocks evaluated were: compressive strength, density, porosity, initial rate of suction (IRS, creep, and volume stability. It was found that the Bitublock performance can be improved by optimizing porosity and curing regime. Compaction level of 2 MPa and curing regime of 200°C for 24 hours gave satisfactory bitublock performances that at least comparable to concrete block found in the United Kingdom (UK. The Volume stability (expansion of the unit is affected by environment relative humidity.

  2. Building blocks for a wild animal health business case

    Directory of Open Access Journals (Sweden)

    Craig Stephen

    2015-07-01

    Full Text Available Investment in wild animal health has not kept pace with investment in health programs for agriculture or people. Previous arguments of the inherent value of wildlife or the possible public health or economic consequences of fish or terrestrial wildlife diseases have failed to motivate sufficient, sustained funding. Wildlife health programs are often funded on an issue-by-issue basis, most often in response to diseases that have already emerged, rather than being funded to protect and promote the health of wild animals on an ongoing basis. We propose that one explanation for this situation is the lack of business cases that explains the value of wild animal health programs to funders. This paper proposes a set of building blocks that inform the creation of wildlife health business cases. The building blocks are a series of questions derived from a literature review, the experience of directors of two large national wildlife health programs and lessons learned in developing a draft business case for one of those programs. The six building blocks are: (1 Know what you are trying to achieve; (2 Describe your capabilities; (3 Identify factors critical to your success; (4 Describe the value you can bring to supporters; (5 Identify who needs your services and why; and (6 Share the plan.

  3. Development of building blocks using vegetable oil and recycled aggregate

    Directory of Open Access Journals (Sweden)

    Attia Mohamed I.

    2017-01-01

    Full Text Available The primary objective of this research was to contribute towards greater sustainability of the construction industry in the Qatar by proposing methods to reduce its dependency on primary imported materials. In this investigation, recycled and secondary aggregates (RSA were combined with non-traditional binders to develop a unique method of manufacturing construction and building blocks. Following an extensive phase of laboratory trials and experimentation, it was realised that many types of graded mineral aggregates, when mixed with vegetable oils (virgin or waste at optimal proportions, then compacted and thermally cured at elevated temperatures can readily generate hardened composites that have the mechanical characteristics of conventional building blocks. The resultant blocks have been named “Vegeblocks” and are viewed as viable alternatives to conventional concrete blocks. Furthermore, the research has demonstrated the feasibility of producing Vegeblocks composed of 100% recycled aggregate and discarded waste cooking oil. Based on physical and mineralogical properties, each type of aggregate has an optimum oil content for maximum compressive strength, beyond which, any additional oil will result in reduction in mechanical properties. Acceptable compressive strength values were achieved by thermally curing Vegeblocks at of 170 °C for 24 hours.

  4. High-performance thermoelectric nanocomposites from nanocrystal building blocks.

    Science.gov (United States)

    Ibáñez, Maria; Luo, Zhishan; Genç, Aziz; Piveteau, Laura; Ortega, Silvia; Cadavid, Doris; Dobrozhan, Oleksandr; Liu, Yu; Nachtegaal, Maarten; Zebarjadi, Mona; Arbiol, Jordi; Kovalenko, Maksym V; Cabot, Andreu

    2016-01-01

    The efficient conversion between thermal and electrical energy by means of durable, silent and scalable solid-state thermoelectric devices has been a long standing goal. While nanocrystalline materials have already led to substantially higher thermoelectric efficiencies, further improvements are expected to arise from precise chemical engineering of nanoscale building blocks and interfaces. Here we present a simple and versatile bottom-up strategy based on the assembly of colloidal nanocrystals to produce consolidated yet nanostructured thermoelectric materials. In the case study on the PbS-Ag system, Ag nanodomains not only contribute to block phonon propagation, but also provide electrons to the PbS host semiconductor and reduce the PbS intergrain energy barriers for charge transport. Thus, PbS-Ag nanocomposites exhibit reduced thermal conductivities and higher charge carrier concentrations and mobilities than PbS nanomaterial. Such improvements of the material transport properties provide thermoelectric figures of merit up to 1.7 at 850 K.

  5. The scientific building blocks for business coaching: A literature review

    Directory of Open Access Journals (Sweden)

    Flip Schutte

    2015-03-01

    Full Text Available Orientation: Business coaching is a relatively new approach to leadership development. It is also slowly growing as an academic discipline with only a small number of active researchers and a dearth of published literature reviews.Research purpose: This article is an investigation into the current level of development of the body of knowledge related to business coaching by means of a systematic literature review.Motivation of the study: Previous literature reviews summarised the available published articles. In order to contribute to establishing business coaching as an independent academic discipline, the building blocks for science in the phenomenon under investigation have to be scientifically not only summarised, but also synthesised and explored to ground this new discipline as an academic field of research.Research design, approach and method: A methodological framework has been developed to analyse the information. The data were synthesised according to the following building blocks for science: concepts, definitions, typologies, models, theories and paradigms.Main findings: A total of 84 articles were accessed by the specified search strategy and 36 were analysed according to inclusive and exclusive criteria. Although coaching has not been sufficiently developed as an academic discipline, it is possible to develop a comprehensive definition of coaching, as well as to identify the main models and theories that apply to this field.Practical/managerial implications: This literature review has synthesised and summarised the available data in such a way that it will contribute to the conceptualisation and foundation of business coaching as an academic discipline.Contribution: The building blocks for business coaching as a relatively new and emerging science within the field of business leadership have been defined. This will contribute to the articulation of concepts within this discipline by future researchers and practitioners.

  6. Universal clusters as building blocks of stable quantum matter

    Science.gov (United States)

    Endo, Shimpei; García-García, Antonio M.; Naidon, Pascal

    2016-05-01

    We present an exploratory study that suggests that Efimov physics, a leading research theme in few-body quantum physics, can also induce stable many-body ground states whose building blocks are universal clusters. We identify a range of parameters in a mass-and-density-imbalanced two-species fermionic mixture for which the ground state is a gas of Efimov-related universal trimers. An explicit calculation of the trimer-trimer interaction reveals that the trimer phase is an SU(3) Fermi liquid stable against recombination losses. We propose to experimentally observe this phase in a fermionic 53Cr-6Li mixture.

  7. The Fundamental Problem with the Building Block Hypothesis

    CERN Document Server

    Burjorjee, Keki

    2008-01-01

    Skepticism of the building block hypothesis (BBH) has previously been expressed on account of the weak theoretical foundations of this hypothesis and the anomalies in the empirical record of the simple genetic algorithm. In this paper we hone in on a more fundamental cause for skepticism--the extraordinary strength of some of the assumptions that undergird the BBH. Specifically, we focus on assumptions made about the distribution of fitness over the genome set, and argue that these assumptions are unacceptably strong. As most of these assumptions have been embraced by the designers of so-called "competent" genetic algorithms, our critique is relevant to an appraisal of such algorithms as well.

  8. Building Blocks Propagation in Quantum-Inspired Genetic Algorithm

    CERN Document Server

    Nowotniak, Robert

    2010-01-01

    This paper presents an analysis of building blocks propagation in Quantum-Inspired Genetic Algorithm, which belongs to a new class of metaheuristics drawing their inspiration from both biological evolution and unitary evolution of quantum systems. The expected number of quantum chromosomes matching a schema has been analyzed and a random variable corresponding to this issue has been introduced. The results have been compared with Simple Genetic Algorithm. Also, it has been presented how selected binary quantum chromosomes cover a domain of one-dimensional fitness function.

  9. Building blocks for topology change in 3D

    CERN Document Server

    Ionicioiu, R

    1997-01-01

    We investigate topology change in 3D. Using Morse theory and handle decomposition we find the set of elementary cobordisms for 3-manifolds. These are: (i) Ø S^2; (ii) \\Sigma_g \\Sigma_{g+1}; (iii) \\Sigma_{g_1} \\sqcup interpretations, e.g. Big Bang/Big Crunch, wormhole creation/annihilation and Einstein-Rosen bridge creation/annihilation, respectively. This decomposition into building blocks can be used in the path integral approach to quantum gravity in the sum over topologies.

  10. Image Chunking: Defining Spatial Building Blocks for Scene Analysis.

    Science.gov (United States)

    1987-04-01

    mumgs0.USmusa 7.AUWOJO 4. CIUTAC Rm6ANT Wuugme*j James V/. Mlahoney DACA? 6-85-C-00 10 NOQ 1 4-85-K-O 124 Artificial Inteligence Laboratory US USS 545...0197 672 IMAGE CHUWING: DEINING SPATIAL UILDING PLOCKS FOR 142 SCENE ANRLYSIS(U) MASSACHUSETTS INST OF TECH CAIIAIDGE ARTIFICIAL INTELLIGENCE LAO J...Technical Report 980 F-Image Chunking: Defining Spatial Building Blocks for Scene DTm -Analysis S ELECTED James V. Mahoney’ MIT Artificial Intelligence

  11. Phosphaketenes as building blocks for the synthesis of triphospha heterocycles.

    Science.gov (United States)

    Heift, Dominikus; Benkő, Zoltán; Grützmacher, Hansjörg

    2014-09-01

    Unsaturated phosphorus compounds, such as phosphaalkenes and phosphaalkynes, show a versatile reactivity in cycloadditions. Although phosphaketenes (R-P=C=O) have been known for three decades, their chemistry has remained limited. Herein, we show that heteroatom-substituted phosphaketenes, R(3) E-P=C=O (E=Si, Sn), are building blocks for silyl- and stannyl-substituted five-membered heterocycles containing three phosphorous atoms. The structure of the heterocyclic anion depends on the nature of the tetrel atom involved. Although the silyl analogue [P(3)C(2) (OSiR(3))(2)](-) is an aromatic 1,2,4-triphospholide, the stannyl compound [P(CO)(2) (PSnR(3))(2)](-) is a 1,2,4-triphosphacyclopenta-3,5-dionate with a delocalized OCPCO fragment. Because of their anionic character, these compounds can easily be used as building blocks, for example, in the preparation of a silyl-functionalized hexaphosphaferrocene or the parent 1,2,4-triphosphacyclopenta-3,5-dionate [P(CO)(2) (PH)(2)](-). NMR spectroscopic investigations and computations have shown that the heterocycle-formation reactions presented herein are remarkably complex.

  12. Statins decrease dendritic arborization in rat sympathetic neurons by blocking RhoA activation

    OpenAIRE

    Kim, Woo-Yang; Gonsiorek, Eugene A.; Barnhart, Chris; Davare, Monika A.; Engebose, Abby J.; Lauridsen, Holly; Bruun, Donald; Lesiak, Adam; Wayman, Gary; Bucelli, Robert; Higgins, Dennis; Lein, Pamela J.

    2009-01-01

    Clinical and experimental evidence suggest that statins decrease sympathetic activity, but whether peripheral mechanisms involving direct actions on post-ganglionic sympathetic neurons contribute to this effect is not known. Because tonic activity of these neurons is directly correlated with the size of their dendritic arbor, we tested the hypothesis that statins decrease dendritic arborization in sympathetic neurons. Oral administration of atorvastatin (20 mg/kg/day for 7 days) significantly...

  13. PUS Services Software Building Block Automatic Generation for Space Missions

    Science.gov (United States)

    Candia, S.; Sgaramella, F.; Mele, G.

    2008-08-01

    The Packet Utilization Standard (PUS) has been specified by the European Committee for Space Standardization (ECSS) and issued as ECSS-E-70-41A to define the application-level interface between Ground Segments and Space Segments. The ECSS-E- 70-41A complements the ECSS-E-50 and the Consultative Committee for Space Data Systems (CCSDS) recommendations for packet telemetry and telecommand. The ECSS-E-70-41A characterizes the identified PUS Services from a functional point of view and the ECSS-E-70-31 standard specifies the rules for their mission-specific tailoring. The current on-board software design for a space mission implies the production of several PUS terminals, each providing a specific tailoring of the PUS services. The associated on-board software building blocks are developed independently, leading to very different design choices and implementations even when the mission tailoring requires very similar services (from the Ground operative perspective). In this scenario, the automatic production of the PUS services building blocks for a mission would be a way to optimize the overall mission economy and improve the robusteness and reliability of the on-board software and of the Ground-Space interactions. This paper presents the Space Software Italia (SSI) activities for the development of an integrated environment to support: the PUS services tailoring activity for a specific mission. the mission-specific PUS services configuration. the generation the UML model of the software building block implementing the mission-specific PUS services and the related source code, support documentation (software requirements, software architecture, test plans/procedures, operational manuals), and the TM/TC database. The paper deals with: (a) the project objectives, (b) the tailoring, configuration, and generation process, (c) the description of the environments supporting the process phases, (d) the characterization of the meta-model used for the generation, (e) the

  14. MECs: "Building Blocks" for Creating Biological and Chemical Instruments.

    Directory of Open Access Journals (Sweden)

    Douglas A Hill

    Full Text Available The development of new biological and chemical instruments for research and diagnostic applications is often slowed by the cost, specialization, and custom nature of these instruments. New instruments are built from components that are drawn from a host of different disciplines and not designed to integrate together, and once built, an instrument typically performs a limited number of tasks and cannot be easily adapted for new applications. Consequently, the process of inventing new instruments is very inefficient, especially for researchers or clinicians in resource-limited settings. To improve this situation, we propose that a family of standardized multidisciplinary components is needed, a set of "building blocks" that perform a wide array of different tasks and are designed to integrate together. Using these components, scientists, engineers, and clinicians would be able to build custom instruments for their own unique needs quickly and easily. In this work we present the foundation of this set of components, a system we call Multifluidic Evolutionary Components (MECs. "Multifluidic" conveys the wide range of fluid volumes MECs operate upon (from nanoliters to milliliters and beyond; "multi" also reflects the multiple disciplines supported by the system (not only fluidics but also electronics, optics, and mechanics. "Evolutionary" refers to the design principles that enable the library of MEC parts to easily grow and adapt to new applications. Each MEC "building block" performs a fundamental function that is commonly found in biological or chemical instruments, functions like valving, pumping, mixing, controlling, and sensing. Each MEC also has a unique symbol linked to a physical definition, which enables instruments to be designed rapidly and efficiently using schematics. As a proof-of-concept, we use MECs to build a variety of instruments, including a fluidic routing and mixing system capable of manipulating fluid volumes over five orders

  15. Key Building Blocks via Enzyme-Mediated Synthesis

    Science.gov (United States)

    Fischer, Thomas; Pietruszka, Jörg

    Biocatalytic approaches to valuable building blocks in organic synthesis have emerged as an important tool in the last few years. While first applications were mainly based on hydrolases, other enzyme classes such as oxidoreductases or lyases moved into the focus of research. Nowadays, a vast number of biotransformations can be found in the chemical and pharmaceutical industries delivering fine chemicals or drugs. The mild reaction conditions, high stereo-, regio-, and chemoselectivities, and the often shortened reaction pathways lead to economical and ecological advantages of enzymatic conversions. Due to the enormous number of enzyme-mediated syntheses, the present chapter is not meant to be a complete review, but to deliver comprehensive insights into well established enzymatic systems and recent advances in the application of enzymes in natural product synthesis. Furthermore, it is focused on the most frequently used enzymes or enzyme classes not covered elsewhere in the present volume.

  16. Hydrotalcite catalysis for the synthesis of new chiral building blocks.

    Science.gov (United States)

    Rodilla, Jesus M; Neves, Patricia P; Pombal, Sofia; Rives, Vicente; Trujillano, Raquel; Díez, David

    2016-01-01

    The use of hydrotalcites for the synthesis of two chiral building blocks in a simple way is described as a new and green methodology. The synthesis of these compounds implies a regioselective Baeyer-Villiger reaction in a very selective way with ulterior opening and lactonisation. This methodology should be considered green for the use of hydrogen peroxide as the only oxidant and hydrotalcites as the catalyst, and because no residues are produced apart from water. The procedure is very adequate for using in gram scale, in order to increase the value of the obtained compounds. The conditions are excellent and can be applied for nonstable compounds, as they are very mild. The synthesised compounds are magnific starting materials for the synthesis of biologically active or natural compounds. The use of a cheap, commercial and chiral compound as carvone disposable in both enantiomeric forms adds an extra value to this methodology.

  17. Building Blocks of the Milky Way's Stellar Halo

    Science.gov (United States)

    van Oirschot, Pim; Starkenburg, Else; Helmi, Amina; Nelemans, Gijs

    2016-08-01

    We study the assembly history of the stellar halo of Milky Way-like galaxies using the six high-resolution Aquarius dark matter simulations combined with the Munich-Groningen semi-analytic galaxy formation model. Our goal is to understand the stellar population contents of the building blocks of the Milky Way halo, including their star formation histories and chemical evolution, as well as their internal dynamical properties. We are also interested in how they relate or are different from the surviving satellite population. Finally, we will use our models to compare to observations of halo stars in an attempt to reconstruct the assembly history of the Milky Way's stellar halo itself.

  18. Structure and Interactions of Isolated Biomolecular Building Blocks.

    Science.gov (United States)

    de Vries, Mattanjah

    2006-03-01

    We investigate biomolecular building blocks and their clusters with each other and with water on a single molecular level. The motivation is the need to distinguish between intrinsic molecular properties and those that result from the biological environment. This is achieved by a combination of laser desorption and jet cooling, applied to aromatic amino acids, small peptides containing those, nucleobases and nucleosides. This approach is coupled with a number of laser spectroscopic techniques, including resonant multi-photon ionization, spectral hole burning and infra-red ion-dip spectroscopy. We will discuss examples illustrating how information can be obtained on spatial structure of individual biomolecules, including peptide conformations and details of DNA base-pairing.

  19. Sequence-defined polymers via orthogonal allyl acrylamide building blocks.

    Science.gov (United States)

    Porel, Mintu; Alabi, Christopher A

    2014-09-24

    Biological systems have long recognized the importance of macromolecular diversity and have evolved efficient processes for the rapid synthesis of sequence-defined biopolymers. However, achieving sequence control via synthetic methods has proven to be a difficult challenge. Herein we describe efforts to circumvent this difficulty via the use of orthogonal allyl acrylamide building blocks and a liquid-phase fluorous support for the de novo design and synthesis of sequence-specific polymers. We demonstrate proof-of-concept via synthesis and characterization of two sequence-isomeric 10-mer polymers. (1)H NMR and LCMS were used to confirm their chemical structure while tandem MS was used to confirm sequence identity. Further validation of this methodology was provided via the successful synthesis of a sequence-specific 16-mer polymer incorporating nine different monomers. This strategy thus shows promise as an efficient approach for the assembly of sequence-specific functional polymers.

  20. Modular assembly of superstructures from polyphenol-functionalized building blocks

    Science.gov (United States)

    Guo, Junling; Tardy, Blaise L.; Christofferson, Andrew J.; Dai, Yunlu; Richardson, Joseph J.; Zhu, Wei; Hu, Ming; Ju, Yi; Cui, Jiwei; Dagastine, Raymond R.; Yarovsky, Irene; Caruso, Frank

    2016-12-01

    The organized assembly of particles into superstructures is typically governed by specific molecular interactions or external directing factors associated with the particle building blocks, both of which are particle-dependent. These superstructures are of interest to a variety of fields because of their distinct mechanical, electronic, magnetic and optical properties. Here, we establish a facile route to a diverse range of superstructures based on the polyphenol surface-functionalization of micro- and nanoparticles, nanowires, nanosheets, nanocubes and even cells. This strategy can be used to access a large number of modularly assembled superstructures, including core-satellite, hollow and hierarchically organized supraparticles. Colloidal-probe atomic force microscopy and molecular dynamics simulations provide detailed insights into the role of surface functionalization and how this facilitates superstructure construction. Our work provides a platform for the rapid generation of superstructured assemblies across a wide range of length scales, from nanometres to centimetres.

  1. Digital building blocks for controlling random waves based on supersymmetry

    CERN Document Server

    Yu, Sunkyu; Park, Namkyoo

    2016-01-01

    Harnessing multimode waves allows high information capacity through modal expansions. Although passive multimode devices including waveguides, couplers, and multiplexers have been demonstrated for broadband responses in momentum or frequency domains, collective switching of multimodes remains a challenge, due to the difficulty in imposing consistent dynamics on all eigenmodes. Here we overcome this limitation by realizing digital switching of spatially random waves, based on supersymmetric pairs of multimode potentials. We reveal that supersymmetric transformations of any parity-symmetric potential derive the parity reversal of all eigenmodes, which allows the complete isolation of random waves at the 'off' state. Building blocks for binary and many-valued logics are then demonstrated for random waves: a harmonic pair for binary switching of arbitrary wavefronts and a P\\"oschl-Teller pair for multi-level switching which implements the fuzzy membership function. Our results establishing global phase matching c...

  2. The building block approach to airborne pod structures

    Science.gov (United States)

    Johansson, Jan D.

    2011-05-01

    The certification and testing of new airborne structures is a costly undertaking. This paper presents which measures can be taken to limit the cost and certification required in order to improve the capabilities of the current airborne as-sets, by applying a building block approach to the design and certification of airborne pod structures. A simple way of improving aircraft capabilities is by adding external pod structures, which has been performed for many applications over many years. However, this paper describes a truly modular approach, in which a typical airborne pod structure may be reconfigured to many various roles, with only limited re-certification requirements. Using existing or general aerodynamic shapes, the basic outer shape for the external store is defined, which is then combined with a modular substructure which can accommodate a large variety of electronic and/or optical sensors. This also allows the airborne pod structure to perform several intelligence collecting operations during the same sortie, thereby limiting the time spent near the danger area. The re-use of existing substructure modules reduces the cost and leadtime of the design phase allowing for a rapid entry into service. The modular design, relying on proven interface systems between the building blocks, significantly reduces risk involved in new programs. The certification process is also discussed in order to optimize the use of the pod structure modularity and certification requirements in order to simplify the certification task, by drawing similarity to existing designs. Finally the paper covers how modularity is implemented in new composite pod designs with stealth capabilities.

  3. Rice Husk Ash Sandcrete Block as Low Cost Building Material

    Directory of Open Access Journals (Sweden)

    S.P.Sangeetha,

    2016-06-01

    Full Text Available Concrete is a widely used construction material for various types of structures due to its structural stability and strength. The construction industry is today consuming more than 400 million tonnes of concrete every year .Most of the increase in cement demand will be met by the use of supplementary cementing materials, as each ton of Portland cement clinker production is associated with similar amount of CO2 emission, which is a major source of global warming. Partial replacement of ordinary Portland cement with mineral admixtures like fly ash, ground granulated blast furnace slag, silica fume, metakaolin, Rice husk Ash (RHA,etc with plasticizers eliminates these drawbacks. The use of rice husk modifies the physical qualities of fresh cement paste as well as microstructure of paste after hardening. By burning the rice husk under a uncontrolled temperature in the atmosphere, a highly reactive RHA was obtained and the ash was utilized as a supplementary cementing material. This paper presents the effects of using Rice Husk Ash (RHA as a partial cement replacement material in mortar mixes. This work is based on an experimental study of mortar made with replacement of Ordinary Portland Cement (OPC with 10%, 20% 30% & 40% RHA. The properties investigated were the compressive strength, setting time, consistency, workability and specific gravity. Finally, a cost analysis was also done to compare the efficiency of rice husk ash sandcrete blocks. From the test results it can be concluded that rice husk ash can be utilized in day today life of manufacturing building blocks which are more economical and more eco-friendly than the cement concrete blocks which are produced now-a-days.

  4. Incorporating GIS building data and census housing statistics for sub-block-level population estimation

    Science.gov (United States)

    Wu, S.-S.; Wang, L.; Qiu, X.

    2008-01-01

    This article presents a deterministic model for sub-block-level population estimation based on the total building volumes derived from geographic information system (GIS) building data and three census block-level housing statistics. To assess the model, we generated artificial blocks by aggregating census block areas and calculating the respective housing statistics. We then applied the model to estimate populations for sub-artificial-block areas and assessed the estimates with census populations of the areas. Our analyses indicate that the average percent error of population estimation for sub-artificial-block areas is comparable to those for sub-census-block areas of the same size relative to associated blocks. The smaller the sub-block-level areas, the higher the population estimation errors. For example, the average percent error for residential areas is approximately 0.11 percent for 100 percent block areas and 35 percent for 5 percent block areas.

  5. A droplet-based building block approach for bladder smooth muscle cell (SMC) proliferation

    Energy Technology Data Exchange (ETDEWEB)

    Xu, F; Moon, S J; Emre, A E; Turali, E S; Song, Y S; Hacking, S A; Demirci, U [Department of Medicine, Bio-Acoustic-MEMS in Medicine (BAMM) Laboratory, Center for Biomedical Engineering, Brigham and Women' s Hospital, Harvard Medical School, Boston, MA (United States); Nagatomi, J, E-mail: udemirci@rics.bwh.harvard.ed [Department of Bioengineering, Clemson University, Clemson, SC (United States)

    2010-03-15

    Tissue engineering based on building blocks is an emerging method to fabricate 3D tissue constructs. This method requires depositing and assembling building blocks (cell-laden microgels) at high throughput. The current technologies (e.g., molding and photolithography) to fabricate microgels have throughput challenges and provide limited control over building block properties (e.g., cell density). The cell-encapsulating droplet generation technique has potential to address these challenges. In this study, we monitored individual building blocks for viability, proliferation and cell density. The results showed that (i) SMCs can be encapsulated in collagen droplets with high viability (>94.2 +- 3.2%) for four cases of initial number of cells per building block (i.e. 7 +- 2, 16 +- 2, 26 +- 3 and 37 +- 3 cells/building block). (ii) Encapsulated SMCs can proliferate in building blocks at rates that are consistent (1.49 +- 0.29) across all four cases, compared to that of the controls. (iii) By assembling these building blocks, we created an SMC patch (5 mm x 5 mm x 20 mum), which was cultured for 51 days forming a 3D tissue-like construct. The histology of the cultured patch was compared to that of a native rat bladder. These results indicate the potential of creating 3D tissue models at high throughput in vitro using building blocks.

  6. A droplet-based building block approach for bladder smooth muscle cell (SMC) proliferation.

    Science.gov (United States)

    Xu, F; Moon, S J; Emre, A E; Turali, E S; Song, Y S; Hacking, S A; Nagatomi, J; Demirci, U

    2010-03-01

    Tissue engineering based on building blocks is an emerging method to fabricate 3D tissue constructs. This method requires depositing and assembling building blocks (cell-laden microgels) at high throughput. The current technologies (e.g., molding and photolithography) to fabricate microgels have throughput challenges and provide limited control over building block properties (e.g., cell density). The cell-encapsulating droplet generation technique has potential to address these challenges. In this study, we monitored individual building blocks for viability, proliferation and cell density. The results showed that (i) SMCs can be encapsulated in collagen droplets with high viability (>94.2 +/- 3.2%) for four cases of initial number of cells per building block (i.e. 7 +/- 2, 16 +/- 2, 26 +/- 3 and 37 +/- 3 cells/building block). (ii) Encapsulated SMCs can proliferate in building blocks at rates that are consistent (1.49 +/- 0.29) across all four cases, compared to that of the controls. (iii) By assembling these building blocks, we created an SMC patch (5 mm x 5 mm x 20 microm), which was cultured for 51 days forming a 3D tissue-like construct. The histology of the cultured patch was compared to that of a native rat bladder. These results indicate the potential of creating 3D tissue models at high throughput in vitro using building blocks.

  7. Theoretical and technological building blocks for an innovation accelerator

    Science.gov (United States)

    van Harmelen, F.; Kampis, G.; Börner, K.; van den Besselaar, P.; Schultes, E.; Goble, C.; Groth, P.; Mons, B.; Anderson, S.; Decker, S.; Hayes, C.; Buecheler, T.; Helbing, D.

    2012-11-01

    Modern science is a main driver of technological innovation. The efficiency of the scientific system is of key importance to ensure the competitiveness of a nation or region. However, the scientific system that we use today was devised centuries ago and is inadequate for our current ICT-based society: the peer review system encourages conservatism, journal publications are monolithic and slow, data is often not available to other scientists, and the independent validation of results is limited. The resulting scientific process is hence slow and sloppy. Building on the Innovation Accelerator paper by Helbing and Balietti [1], this paper takes the initial global vision and reviews the theoretical and technological building blocks that can be used for implementing an innovation (in first place: science) accelerator platform driven by re-imagining the science system. The envisioned platform would rest on four pillars: (i) Redesign the incentive scheme to reduce behavior such as conservatism, herding and hyping; (ii) Advance scientific publications by breaking up the monolithic paper unit and introducing other building blocks such as data, tools, experiment workflows, resources; (iii) Use machine readable semantics for publications, debate structures, provenance etc. in order to include the computer as a partner in the scientific process, and (iv) Build an online platform for collaboration, including a network of trust and reputation among the different types of stakeholders in the scientific system: scientists, educators, funding agencies, policy makers, students and industrial innovators among others. Any such improvements to the scientific system must support the entire scientific process (unlike current tools that chop up the scientific process into disconnected pieces), must facilitate and encourage collaboration and interdisciplinarity (again unlike current tools), must facilitate the inclusion of intelligent computing in the scientific process, must facilitate

  8. Nanobiotechnology with S-layer proteins as building blocks.

    Science.gov (United States)

    Sleytr, Uwe B; Schuster, Bernhard; Egelseer, Eva M; Pum, Dietmar; Horejs, Christine M; Tscheliessnig, Rupert; Ilk, Nicola

    2011-01-01

    One of the key challenges in nanobiotechnology is the utilization of self- assembly systems, wherein molecules spontaneously associate into reproducible aggregates and supramolecular structures. In this contribution, we describe the basic principles of crystalline bacterial surface layers (S-layers) and their use as patterning elements. The broad application potential of S-layers in nanobiotechnology is based on the specific intrinsic features of the monomolecular arrays composed of identical protein or glycoprotein subunits. Most important, physicochemical properties and functional groups on the protein lattice are arranged in well-defined positions and orientations. Many applications of S-layers depend on the capability of isolated subunits to recrystallize into monomolecular arrays in suspension or on suitable surfaces (e.g., polymers, metals, silicon wafers) or interfaces (e.g., lipid films, liposomes, emulsomes). S-layers also represent a unique structural basis and patterning element for generating more complex supramolecular structures involving all major classes of biological molecules (e.g., proteins, lipids, glycans, nucleic acids, or combinations of these). Thus, S-layers fulfill key requirements as building blocks for the production of new supramolecular materials and nanoscale devices as required in molecular nanotechnology, nanobiotechnology, biomimetics, and synthetic biology.

  9. Origami building blocks: Generic and special four-vertices

    Science.gov (United States)

    Waitukaitis, Scott; van Hecke, Martin

    2016-02-01

    Four rigid panels connected by hinges that meet at a point form a four-vertex, the fundamental building block of origami metamaterials. Most materials designed so far are based on the same four-vertex geometry, and little is known regarding how different geometries affect folding behavior. Here we systematically categorize and analyze the geometries and resulting folding motions of Euclidean four-vertices. Comparing the relative sizes of sector angles, we identify three types of generic vertices and two accompanying subtypes. We determine which folds can fully close and the possible mountain-valley assignments. Next, we consider what occurs when sector angles or sums thereof are set equal, which results in 16 special vertex types. One of these, flat-foldable vertices, has been studied extensively, but we show that a wide variety of qualitatively different folding motions exist for the other 15 special and 3 generic types. Our work establishes a straightforward set of rules for understanding the folding motion of both generic and special four-vertices and serves as a roadmap for designing origami metamaterials.

  10. Dispersions of Aramid Nanofibers: A New Nanoscale Building Block

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ming; Cao, Keqin; Sui, Lang; Qi, Ying; Zhu, Jian; Waas, Anthony; Arruda, Ellen; Kieffer, John; Thouless, M. D.; Kotov, Nicholas A.

    2011-09-27

    Stable dispersions of nanofibers are virtually unknown for synthetic polymers. They can complement analogous dispersions of inorganic components, such as nanoparticles, nanowires, nanosheets, etc. as a fundamental component of a toolset for design of nanostructures and metamaterials via numerous solvent-based processing methods. As such, strong flexible polymeric nanofibers are very desirable for the effective utilization within composites of nanoscale inorganic components such as nanowires, carbon nanotubes, graphene, and others. Here stable dispersions of uniform high-aspect-ratio aramid nanofibers (ANFs) with diameters between 3 and 30 nm and up to 10 μm in length were successfully obtained. Unlike the traditional approaches based on polymerization of monomers, they are made by controlled dissolution of standard macroscale form of the aramid polymer, that is, well-known Kevlar threads, and revealed distinct morphological features similar to carbon nanotubes. ANFs are successfully processed into films using layer-by-layer (LBL) assembly as one of the potential methods of preparation of composites from ANFs. The resultant films are transparent and highly temperature resilient. They also display enhanced mechanical characteristics making ANF films highly desirable as protective coatings, ultrastrong membranes, as well as building blocks of other high performance materials in place of or in combination with carbon nanotubes.

  11. From Building Blocks to Architects Empowering Learners for Success

    Directory of Open Access Journals (Sweden)

    Reyes Juana Mahissa

    2002-08-01

    Full Text Available Although our ultimate goal is to enable our learners to become autonomous and efficient in their use of the foreign language, whether or not they have the opportunity to ever live and interact in a foreign language setting, our work as teachers must involve a conscious analysis of the different factors involved in this process, as well as the conscious effort to put all the intervening factors into action. Furthermore, it is our responsibility to develop the learners¿ thinking skills as they increase their competence in the target language and at the same time make them aware of their responsibility for their own processes and success by enhancing their autonomy and making them aware of the value of learning strategies. It is our task as teachers to be present on this journey and guide our learners towards becoming architects and masters of their own foreign language construct. In order for this journey to be a successful one, we must make sure we provide the learner with a correct supply of building blocks. In this paper we present an analysis of the main components comprised in teaching English as a foreign language, including a historical overview of methods, approaches, strategies, the concept of learner¿s autonomy, social and psychological factors, aiming at contributing to every teacher¿s reflection on his/her task in the school context.

  12. Polymeric architectures of bismuth citrate based on dimeric building blocks

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Four bismuth complexes, (H2En)[Bi2(cit)2(H2O)4/3]·(H2O)x (1), (H2En)3[Bi2(cit)2Cl4]·(H2O)x (2), (HPy)2[Bi2(cit)2(H2O)8/5]·(H2O)x (3) and (H2En)[Bi2(cit)2](H2O)x (4) [cit = citrate4-; En = ethylenediamine; Py = pyridine] have been synthesized and crystallized. The crystal structures reveal that the basic building blocks in all of these complexes are bismuth citrate dimeric units which combine to form polymeric architectures. The embedded protonated ethylenediamine and pyridine moieties in the polymeric frameworks have been identified by X-ray crystallography and solid-state cross polarization/magic angle spinning (CP/MAS) 13C NMR. Based on the framework of complex 1, a structural model of a clinically used antiulcer drug, ranitidine bismuth citrate (RBC) was generated. The behavior of the protonated amine-bismuth citrate complexes in acidic aqueous solution has been studied by electrospray ionization-mass spectrometry (ESI-MS).

  13. Building blocks for a clinical imaging informatics environment.

    Science.gov (United States)

    Kohli, Marc D; Warnock, Max; Daly, Mark; Toland, Christopher; Meenan, Chris; Nagy, Paul G

    2014-04-01

    Over the past 20 years, imaging informatics has been driven by the widespread adoption of radiology information and picture archiving and communication and speech recognition systems. These three clinical information systems are commonplace and are intuitive to most radiologists as they replicate familiar paper and film workflow. So what is next? There is a surge of innovation in imaging informatics around advanced workflow, search, electronic medical record aggregation, dashboarding, and analytics tools for quality measures (Nance et al., AJR Am J Roentgenol 200:1064-1070, 2013). The challenge lies in not having to rebuild the technological wheel for each of these new applications but instead attempt to share common components through open standards and modern development techniques. The next generation of applications will be built with moving parts that work together to satisfy advanced use cases without replicating databases and without requiring fragile, intense synchronization from clinical systems. The purpose of this paper is to identify building blocks that can position a practice to be able to quickly innovate when addressing clinical, educational, and research-related problems. This paper is the result of identifying common components in the construction of over two dozen clinical informatics projects developed at the University of Maryland Radiology Informatics Research Laboratory. The systems outlined are intended as a mere foundation rather than an exhaustive list of possible extensions.

  14. Aminobenzoates as building blocks for natural product assembly lines.

    Science.gov (United States)

    Walsh, Christopher T; Haynes, Stuart W; Ames, Brian D

    2012-01-01

    The ortho-, meta-, and para- regioisomers of aminobenzoate are building blocks for a wide range of microbial natural products. Both the ortho-isomer (anthranilate) and PABA derive from the central shikimate pathway metabolite chorismate while the meta-isomer is not available by that route and starts from UDP-3-aminoglucose. PABA is largely funnelled into folate biosynthesis while anthranilate is the scaffold for biosynthetic elaboration into many natural heterocycles, most notably with its role in indole formation for tryptophan biosynthesis. Anthranilate is also converted to benzodiazepinones, fumiquinazolines, quinoxalines, phenoxazines, benzoxazolinates, quinolones, and phenazines, often with redox enzyme participation. The 5-hydroxy form of 3-aminobenzaote is the starter unit for ansa-bridged rifamycins, ansamitocins, and geldanamycins, whereas regioisomers 2-hydroxy, 4-hydroxy and 2,4-dihydroxy-3-aminobenzoate are key components of antimycin, grixazone, and platencin and platensimycin biosynthesis, respectively. The enzymatic mechanisms for generation of the aminobenzoate regioisomers and their subsequent utilization for diverse heterocycle and macrocycle construction are examined.

  15. Synthesis of aromatic glycoconjugates. Building blocks for the construction of combinatorial glycopeptide libraries

    Directory of Open Access Journals (Sweden)

    Markus Nörrlinger

    2014-10-01

    Full Text Available New aromatic glycoconjugate building blocks based on the trifunctional 3-aminomethyl-5-aminobenzoic acid backbone and sugars linked to the backbone by a malonyl moiety were prepared via peptide coupling. The orthogonally protected glycoconjugates, bearing an acetyl-protected glycoside, were converted into their corresponding acids which are suitable building blocks for combinatorial glycopeptide synthesis.

  16. The Development of Spatial Skills through Interventions Involving Block Building Activities

    Science.gov (United States)

    Casey, Beth M.; Andrews, Nicole; Schindler, Holly; Kersh, Joanne E.; Samper, Alexandra; Copley, Juanita

    2008-01-01

    This study investigated the use of block-building interventions to develop spatial-reasoning skills in kindergartners. Two intervention conditions and a control condition were included to determine, first, whether the block building activities themselves benefited children's spatial skills, and secondly, whether a story context further improved…

  17. Liquid Metallic Hydrogen: A Building Block for the Liquid Sun

    Directory of Open Access Journals (Sweden)

    Robitaille P.-M.

    2011-07-01

    Full Text Available Liquid metallic hydrogen provides a compelling material for constructing a condensed matter model of the Sun and the photosphere. Like diamond, metallic hydrogen might have the potential to be a metastable substance requiring high pressures for forma- tion. Once created, it would remain stable even at lower pressures. The metallic form of hydrogen was initially conceived in 1935 by Eugene Wigner and Hillard B. Huntington who indirectly anticipated its elevated critical temperature for liquefaction (Wigner E. and Huntington H.B. On the possibility of a metallic modification of hydro- gen. J. Chem. Phys. , 1935, v.3, 764–770. At that time, solid metallic hydrogen was hypothesized to exist as a body centered cubic, although a more energetically accessible layered graphite-like lattice was also envisioned. Relative to solar emission, this struc- tural resemblance between graphite and layered metallic hydrogen should not be easily dismissed. In the laboratory, metallic hydrogen remains an elusive material. However, given the extensive observational evidence for a condensed Sun composed primarily of hydrogen, it is appropriate to consider metallic hydrogen as a solar building block. It is anticipated that solar liquid metallic hydrogen should possess at least some layered order. Since layered liquid metallic hydrogen would be essentially incompressible, its invocation as a solar constituent brings into question much of current stellar physics. The central proof of a liquid state remains the thermal spectrum of the Sun itself. Its proper understanding brings together all the great forces which shaped modern physics. Although other proofs exist for a liquid photosphere, our focus remains solidly on the generation of this light.

  18. The building blocks of the full body ownership illusion

    Directory of Open Access Journals (Sweden)

    Antonella eMaselli

    2013-03-01

    Full Text Available Previous work has reported that it is not difficult to give people the illusion of ownership over an artificial body, providing a powerful tool for the investigation of the neural and cognitive mechanisms underlying body perception and self consciousness. We present an experimental study that uses immersive virtual reality focused on identifying the perceptual building blocks of this illusion. We systematically manipulated visuotactile and visual sensorimotor contingencies, visual perspective, and the appearance of the virtual body in order to assess their relative role and mutual interaction. Consistent results from subjective reports and physiological measures showed that a first person perspective over a fake humanoid body is essential for eliciting a body ownership illusion. We found that the level of realism of the virtual body, in particular the realism of skin tone, plays a critical role: when high enough, the illusion can be triggered by the sole effect of the spatial overlap between the real and virtual bodies, providing congruent visuoproprioceptive information, with no need for the additional contribution of congruent visuotactile and/or visual sensorimotor cues. Additionally, we found that the processing of incongruent perceptual cues can be modulated by the level of the illusion: when the illusion is strong, incongruent cues are not experienced as incorrect. Participants exposed to asynchronous visuotactile stimulation can experience the ownership illusion and perceive touch as originating from an object seen to contact the virtual body. Analogously, when the level of realism of the virtual body and/or the spatial overlap of the two bodies is not high enough, the contribution of congruent multisensory and/or sensorimotor cues is required for evoking the illusion. On the basis of these results and inspired by findings from neurophysiological recordings in the monkey, we propose a model that accounts for many of the results reported

  19. Anisotropy spectra for enantiomeric differentiation of biomolecular building blocks.

    Science.gov (United States)

    Evans, A C; Meinert, C; Bredehöft, J H; Giri, C; Jones, N C; Hoffmann, S V; Meierhenrich, U J

    2013-01-01

    All biopolymers are composed of homochiral building blocks, and both D-sugars and L-amino acids uniquely constitute life on Earth. These monomers were originally enantiomerically differentiated under prebiotic conditions. Particular progress has recently been made in support of the photochemical model for this differentiation: the interaction of circularly polarized light with racemic molecules is currently thought to have been the original source for life's biological homochirality. The differential asymmetric photoreactivity of particular small molecules can be characterized by both circular dichroism and anisotropy spectroscopy. Anisotropy spectroscopy, a novel derivative of circular dichroism spectroscopy, records the anisotropy factor g = Δε/ε as a function of the wavelength. Anisotropy spectroscopy promisingly affords the wavelength-dependent determination of the enantiomeric excess (ee) inducible into chiral organic molecules by photochemical irradiation with circularly polarized light. Anisotropy spectra of small molecules therefore provide unique means for characterizing the different photochemical behaviors between enantiomers upon exposure to various wavelengths of circularly polarized light. This chapter will: (1) present the theory and configuration of anisotropy spectroscopy; (2) explain experimentally recorded anisotropy spectra of selected chiral biomolecules such as amino acids; and (3) discuss the relevance of these spectra for the investigation of the origin of the molecular homochirality observed in living organisms. This review describes a new chiroptical technique that is of significance for advances in asymmetric photochemistry and that is also highly relevant for the European Space Agency Rosetta Mission, which will determine enantiomeric excesses (ees) in chiral organic molecules in cometary ices when it lands on Comet 67P/Churyumov-Gerasimenko in November 2014.

  20. Elemental building blocks of the slow solar wind

    Science.gov (United States)

    Kepko, L.; Viall, N. M.; Lepri, S. T.

    2014-12-01

    While the source of the fast solar wind is well understood to be linked to coronal holes, the source of the slow solar wind has remained elusive. A distinguishing characteristic of the slow solar wind is the high variability of the plasma parameters, such as magnetic field, velocity, density, composition, and charge state. Many previous studies of the slow solar wind have examined trends in the composition and charge states over long time scales and using data with comparatively low temporal resolution. In this study, we take advantage of high time resolution (12 min) measurements of the charge-state abundances recently reprocessed by the ACE SWICS science team to probe the timescales of solar wind variability of coherent structures at relatively small scales (<2000 Mm, or ~ 90 minutes at slow wind speeds). We use an interval of slow solar wind containing quasi pressure-balanced, periodic number density structures previously studied by Kepko et al and shown to be important in solar wind-magnetospheric coupling. The combination of high temporal resolution composition measurements and the clearly identified boundaries of the periodic structures allows us to probe the elemental slow solar wind flux tubes/structures. We use this train of 2000Mm periodic density structures as tracers of solar wind origin and/or acceleration. We find that each 2000 Mm parcel of slow solar wind, though its speed is steady, exhibits the complete range of charge state and composition variations expected for the entire range of slow solar wind, in a repeated sequence. Each parcel cycles through three states: 1) 'normal' slow wind, 2) compositionally slow wind with very high density, and 3) compositionally fast but typical slow solar wind density. We conclude by suggesting these structures form elemental building blocks of the slow solar wind, and discuss whether it is necessary to decouple separately the process(es) responsible for the release and acceleration.

  1. An Organolanthanide Building Block Approach to Single-Molecule Magnets.

    Science.gov (United States)

    Harriman, Katie L M; Murugesu, Muralee

    2016-06-21

    and experimental chemistry allows us to shed light on the mechanisms and electronic properties that govern the slow relaxation dynamics inherent to this unique set of SMMs, thus providing insight into the role by which both symmetry and crystal field effects contribute to the magnetic properties. As we look to the future success of such materials in practical devices, we must gain an understanding of how the 4f elements communicate magnetically, a subject upon which there is still limited knowledge. As such, we have described our work on coupling mononuclear metallocenes to generate new dinuclear SMMs. Through a building block approach, we have been able to gain access to new double,- triple- and quadruple-decker complexes that possess remarkable properties; exhibiting TB of 12 K and Ueff above 300 K. Our goal is to develop a fundamental platform from which to study 4f coupling, while maintaining and enhancing the strict axiality of the anisotropy of the 4f ions. This Account will present a successful strategy employed in the production of novel and high-performing SMMs, as well as a clear overview of the lessons learned throughout.

  2. Enzymatic nanoreactors for environmentally benign biotransformations. 1. Formation and catalytic activity of supramolecular complexes of laccase and linear-dendritic block copolymers.

    Science.gov (United States)

    Gitsov, Ivan; Hamzik, James; Ryan, Joseph; Simonyan, Arsen; Nakas, James P; Omori, Shigetoshi; Krastanov, Albert; Cohen, Tomer; Tanenbaum, Stuart W

    2008-03-01

    We describe the construction of enzymatic nanoreactors through noncovalent envelopment of a glycoprotein by amphiphilic linear-dendritic AB or ABA copolymers. The synthetic procedure is based on the regioselective adsorption of dendritic poly(benzyl ether)-block-linear poly(ethylene glycol)-block-dendritic poly(benzyl ether) or linear poly(ethylene oxide)-block-dendritic poly(benzyl ether) copolymers onto the oxidative enzyme laccase from Trametes versicolor in aqueous medium. The complexes formed have improved catalytic activity compared with the native enzyme (77-85 nkat/mL vs 60 nkat/mL, respectively) and are more stable at elevated temperatures up to 70 degrees C. Experiments with deglycosylated laccase confirm that the glycoside fragments in the native enzyme serve as the anchor sites for the linear-dendritic copolymers. The enzymatic nanoreactors are able to effectively oxidize series of substrates: phenolic compounds (syringaldazine) and hydrophobic polyaromatic hydrocarbons (anthracene and benzo[a]pyrene) under "green" chemistry conditions.

  3. Building a Case for Blocks as Kindergarten Mathematics Learning Tools

    Science.gov (United States)

    Kinzer, Cathy; Gerhardt, Kacie; Coca, Nicole

    2016-01-01

    Kindergarteners need access to blocks as thinking tools to develop, model, test, and articulate their mathematical ideas. In the current educational landscape, resources such as blocks are being pushed to the side and being replaced by procedural worksheets and academic "seat time" in order to address standards. Mathematics research…

  4. The covenant as fundamental building block of marriage

    Directory of Open Access Journals (Sweden)

    Amanda L. Du Plessis

    2012-05-01

    Full Text Available

    ENGLISH ABSTRACT:
    Marriage is an institution of God, a social institution, a multidimensional experience, as well as an intimate personal relationship between a man and a woman. In the Bible the marital relationship is used to describe the covenant relationship between God and human beings. The covenant relationship between God and human beings gives man a secure and safe space where he/she can grow to spiritual and emotional maturity in God, through Jesus Christ. When spouses understand and accept the covenant as a fundamental building block in their marriage, and live accordingly, it creates a profound union and intimacy. Marriage then becomes a safe haven in which spouses can grow to spiritual and emotional wholeness. The question this article explores is how the covenant as the pastoral point of departure may contribute to marriage pastorate. The empirical research has shown that marriage counselling is currently executed reactively, rather than pro-actively.

    AFRIKAANSE OPSOMMING:
    DIE VERBOND AS FUNDAMENTELE BOUSTEEN VIR DIE HUWELIK
    Die huwelik is ’n instelling van God, ’n sosiale instelling, multidimensionele ervaring, asook ’n intieme persoonlike verhouding tussen ’n man en ’n vrou. In die Bybel word die huweliksverhouding gebruik om die verbondsverhouding tussen God en die mens te beskryf. Die verbondsverhouding tussen God en die mens gee aan die mens sekuriteit en veilige ruimte waarbinne die mens tot volwassenheid in God deur Jesus kan groei. Wanneer huweliksgenote die aspekte van die verbond as fundamentele bousteen in hulle huwelik begryp en daarvolgens leef, ontstaan ’n diepe eenwording en intimiteit. Die huwelik word dan ’n veilige ruimte waarbinne beide huweliksgenote geestelik en emosioneel kan groei tot heelheid. Die vraag wat in hierdie artikel ondersoek word, is op watter manier die verbond as pastorale vertrekpunt kan bydra tot die huwelikspastoraat. Die empiriese

  5. Science Support: The Building Blocks of Active Data Curation

    Science.gov (United States)

    Guillory, A.

    2013-12-01

    While the scientific method is built on reproducibility and transparency, and results are published in peer reviewed literature, we have come to the digital age of very large datasets (now of the order of petabytes and soon exabytes) which cannot be published in the traditional way. To preserve reproducibility and transparency, active curation is necessary to keep and protect the information in the long term, and 'science support' activities provide the building blocks for active data curation. With the explosive growth of data in all fields in recent years, there is a pressing urge for data centres to now provide adequate services to ensure long-term preservation and digital curation of project data outputs, however complex those may be. Science support provides advice and support to science projects on data and information management, from file formats through to general data management awareness. Another purpose of science support is to raise awareness in the science community of data and metadata standards and best practice, engendering a culture where data outputs are seen as valued assets. At the heart of Science support is the Data Management Plan (DMP) which sets out a coherent approach to data issues pertaining to the data generating project. It provides an agreed record of the data management needs and issues within the project. The DMP is agreed upon with project investigators to ensure that a high quality documented data archive is created. It includes conditions of use and deposit to clearly express the ownership, responsibilities and rights associated with the data. Project specific needs are also identified for data processing, visualization tools and data sharing services. As part of the National Centre for Atmospheric Science (NCAS) and National Centre for Earth Observation (NCEO), the Centre for Environmental Data Archival (CEDA) fulfills this science support role of facilitating atmospheric and Earth observation data generating projects to ensure

  6. Biologically inspired strategy for programmed assembly of viral building blocks with controlled dimensions.

    Science.gov (United States)

    Rego, Jennifer M; Lee, Jae-Hun; Lee, David H; Yi, Hyunmin

    2013-02-01

    Facile fabrication of building blocks with precisely controlled dimensions is imperative in the development of functional devices and materials. We demonstrate the assembly of nanoscale viral building blocks of controlled lengths using a biologically motivated strategy. To achieve this we exploit the simple self-assembly mechanism of Tobacco mosaic virus (TMV), whose length is solely governed by the length of its genomic mRNA. We synthesize viral mRNA of desired lengths using simple molecular biology techniques, and in vitro assemble the mRNA with viral coat proteins to yield viral building blocks of controlled lengths. The results indicate that the assembly of the viral building blocks is consistent and reproducible, and can be readily extended to assemble building blocks with genetically modified coat proteins (TMV1cys). Additionally, we confirm the potential utility of the TMV1cys viral building blocks with controlled dimensions via covalent and quantitative conjugation of fluorescent markers. We envision that our biologically inspired assembly strategy to design and construct viral building blocks of controlled dimensions could be employed to fabricate well-controlled nanoarchitectures and hybrid nanomaterials for a wide variety of applications including nanoelectronics and nanocatalysis.

  7. In vivo dendrite regeneration after injury is different from dendrite development

    Science.gov (United States)

    Li, Tun; Jan, Lily Yeh; Jan, Yuh Nung

    2016-01-01

    Neurons receive information along dendrites and send signals along axons to synaptic contacts. The factors that control axon regeneration have been examined in many systems, but dendrite regeneration has been largely unexplored. Here we report that, in intact Drosophila larvae, a discrete injury that removes all dendrites induces robust dendritic growth that recreates many features of uninjured dendrites, including the number of dendrite branches that regenerate and responsiveness to sensory stimuli. However, the growth and patterning of injury-induced dendrites is significantly different from uninjured dendrites. We found that regenerated arbors cover much less territory than uninjured neurons, fail to avoid crossing over other branches from the same neuron, respond less strongly to mechanical stimuli, and are pruned precociously. Finally, silencing the electrical activity of the neurons specifically blocks injury-induced, but not developmental, dendrite growth. By elucidating the essential features of dendrites grown in response to acute injury, our work builds a framework for exploring dendrite regeneration in physiological and pathological conditions. PMID:27542831

  8. Autocrine CCL19 blocks dendritic cell migration toward weak gradients of CCL21

    DEFF Research Database (Denmark)

    Hansen, Morten; Met, Özcan; Larsen, Niels Bent

    2016-01-01

    the effect of autocrine CCL19 on in vitro migration of human DCs toward CCL21. Results. Using human monocyte-derived DCs in a 3D chemotaxis assay, we are the first to demonstrate that CCL19 more potently induces directed migration of human DCs compared with CCL21. When comparing migration of type 1 DCs......Background aims. Maturation of dendritic cells (DCs) induces their homing from peripheral to lymphatic tissues guided by CCL21. However, in vitro matured human monocyte-derived DC cancer vaccines injected intradermally migrate poorly to lymph nodes (LNs). In vitro maturation protocols generate DCs...... and PGE2-DCs, migration of type 1 DCs was strikingly impaired compared with PGE2-DCs, but only toward low concentrations of CCL21. When type 1 DCs were cultured overnight in fresh culture medium (reducing autocrine CCL19 levels), a rescuing effect was observed on migration toward low concentrations of CCL...

  9. Convenient Syntheses of Some C4 Chiral Building Blocks Starting From (S)-Malic Acid

    Institute of Scientific and Technical Information of China (English)

    WU TianJun; YU XianYong; ZHENG Xiao; HUANG PeiQiang

    2001-01-01

    @@ In the field of chiral technology, the synthesis of chiral intermediates and chiral building blocks occupies an important position. Chiral building blocks bearing double and / or multiple functionalities is particularly useful for the synthesis of chiral pharmaceuticals and chiral agrochemicals. In the recent years, we have been engaged in the development of synthetic methodology based on (S)-malic acid1-s. In these studies, malimide 2, easily accessible from (S)-malic acid, was shown to be a useful multifunctional building block in the asymmetric synthesis of natural products and chiral drugs (Scheme 1).

  10. Convenient Syntheses of Some C4 Chiral Building Blocks Starting From (S)-Malic Acid

    Institute of Scientific and Technical Information of China (English)

    WU; TianJun

    2001-01-01

    In the field of chiral technology, the synthesis of chiral intermediates and chiral building blocks occupies an important position. Chiral building blocks bearing double and / or multiple functionalities is particularly useful for the synthesis of chiral pharmaceuticals and chiral agrochemicals.  In the recent years, we have been engaged in the development of synthetic methodology based on (S)-malic acid1-s. In these studies, malimide 2, easily accessible from (S)-malic acid, was shown to be a useful multifunctional building block in the asymmetric synthesis of natural products and chiral drugs (Scheme 1).  ……

  11. Radix-2α/4β Building Blocks for Efficient VLSI’s Higher Radices Butterflies Implementation

    Directory of Open Access Journals (Sweden)

    Marwan A. Jaber

    2014-01-01

    has been formulated as the combination of radix-2α/4β butterflies implemented in parallel. By doing so, the VLSI butterfly implementation for higher radices would be feasible since it maintains approximately the same complexity of the radix-2/4 butterfly which is obtained by block building of the radix-2/4 modules. The block building process is achieved by duplicating the block circuit diagram of the radix-2/4 module that is materialized by means of a feed-back network which will reuse the block circuit diagram of the radix-2/4 module.

  12. Mn-based nanostructured building blocks: Synthesis, characterization and applications

    Science.gov (United States)

    Beltran Huarac, Juan

    The quest for smaller functional elements of devices has stimulated increased interest in charge-transfer phenomena at the nanoscale. Mn-based nanostructured building blocks are particularly appealing given that the excited states of high-spin Mn2+ ions induce unusual d-d energy transfer processes, which is critical for better understanding the performance of electronic and spintronic devices. These nanostructures also exhibit unique properties superior to those of common Fe- and Co-based nanomaterials, including: excellent structural flexibility, enhanced electrochemical energy storage, effective ion-exchange dynamics, more comprehensive transport mechanisms, strong quantum yield, and they act as effective luminescent centers for more efficient visible light emitters. Moreover, Mn-based nanostructures (MBNs) are crucial for the design and assembly of inexpensive nanodevices in diluted magnetic semiconductors (DMS), optoelectronics, magneto-optics, and field-effect transistors, owing to the great abundance and low-cost of Mn. Nonetheless, the paucity of original methods and techniques to fabricate new multifunctional MBNs that fulfill industrial demands limits the sustainable development of innovative technology in materials sciences. In order to meet this critical need, in this thesis we develop and implement novel methods and techniques to fabricate zero- and one-dimensional highly-crystalline new-generation MBNs conducive to the generation of new technology, and provide alternative and feasible miniaturization strategies to control and devise at nanometric precision their size, shape, structure and composition. Herein, we also establish the experimental conditions to grow Mn-based nanowires (NWs), nanotubes (NTs), nanoribbons (NRs), nanosaws (NSs), nanoparticles (NPs) and nanocomposites (NCs) via chemical/physical deposition and co-precipitation chemical routes, and determine the pertinent arrangements to our experimental schemes in order to extend our bottom

  13. Cosmic "Dig" Reveals Vestiges of the Milky Way's Building Blocks

    Science.gov (United States)

    2009-11-01

    Peering through the thick dust clouds of our galaxy's "bulge" (the myriads of stars surrounding its centre), and revealing an amazing amount of detail, a team of astronomers has unveiled an unusual mix of stars in the stellar grouping known as Terzan 5. Never observed anywhere in the bulge before, this peculiar "cocktail" of stars suggests that Terzan 5 is in fact one of the bulge's primordial building blocks, most likely the relic of a proto-galaxy that merged with the Milky Way during its very early days. "The history of the Milky Way is encoded in its oldest fragments, globular clusters and other systems of stars that have witnessed the entire evolution of our galaxy," says Francesco Ferraro from the University of Bologna, lead author of a paper appearing in this week's issue of the journal Nature. "Our study opens a new window on yet another piece of our galactic past." Like archaeologists, who dig through the dust piling up on top of the remains of past civilisations and unearth crucial pieces of the history of mankind, astronomers have been gazing through the thick layers of interstellar dust obscuring the bulge of the Milky Way and have unveiled an extraordinary cosmic relic. The target of the study is the star cluster Terzan 5. The new observations show that this object, unlike all but a few exceptional globular clusters, does not harbour stars which are all born at the same time - what astronomers call a "single population" of stars. Instead, the multitude of glowing stars in Terzan 5 formed in at least two different epochs, the earliest probably some 12 billion years ago and then again 6 billion years ago. "Only one globular cluster with such a complex history of star formation has been observed in the halo of the Milky Way: Omega Centauri," says team member Emanuele Dalessandro. "This is the first time we see this in the bulge." The galactic bulge is the most inaccessible region of our galaxy for astronomical observations: only infrared light can

  14. Plastic Fibre Reinforced Soil Blocks as a Sustainable Building Material

    Science.gov (United States)

    Prasad, C. K. Subramania; Nambiar, E. K. Kunhanandan; Abraham, Benny Mathews

    2012-10-01

    Solid waste management, especially the huge quantity of waste plastics, is one of the major environmental concerns nowadays. Their employability in block making in the form of fibres, as one of the methods of waste management, can be investigated through a fundamental research. This paper highlights the salient observations from a systematic investigation on the effect of embedded fibre from plastic waste on the performance of stabilised mud blocks. Stabilisation of the soil was done by adding cement, lime and their combination. Plastic fibre in chopped form from carry bags and mineral water bottles were added (0.1% & 0.2% by weight of soil) as reinforcement. The blocks were tested for density, and compressive strength, and observed failure patterns were analysed. Blocks with 0.1% of plastic fibres showed an increase in strength of about 3 to 10%. From the observations of failure pattern it can be concluded that benefits of fibre reinforcement includes both improved ductility in comparison with raw blocks and inhibition of crack propogation after its initial formation.

  15. Polymorphic Ring-Shaped Molecular Clusters Made of Shape-Variable Building Blocks

    Directory of Open Access Journals (Sweden)

    Keitel Cervantes-Salguero

    2015-02-01

    Full Text Available Self-assembling molecular building blocks able to dynamically change their shapes, is a concept that would offer a route to reconfigurable systems. Although simulation studies predict novel properties useful for applications in diverse fields, such kinds of building blocks, have not been implemented thus far with molecules. Here, we report shape-variable building blocks fabricated by DNA self-assembly. Blocks are movable enough to undergo shape transitions along geometrical ranges. Blocks connect to each other and assemble into polymorphic ring-shaped clusters via the stacking of DNA blunt-ends. Reconfiguration of the polymorphic clusters is achieved by the surface diffusion on mica substrate in response to a monovalent salt concentration. This work could inspire novel reconfigurable self-assembling systems for applications in molecular robotics.

  16. Polymorphic Ring-Shaped Molecular Clusters Made of Shape-Variable Building Blocks

    Science.gov (United States)

    Cervantes-Salguero, Keitel; Hamada, Shogo; Nomura, Shin-ichiro M.; Murata, Satoshi

    2015-01-01

    Self-assembling molecular building blocks able to dynamically change their shapes, is a concept that would offer a route to reconfigurable systems. Although simulation studies predict novel properties useful for applications in diverse fields, such kinds of building blocks, have not been implemented thus far with molecules. Here, we report shape-variable building blocks fabricated by DNA self-assembly. Blocks are movable enough to undergo shape transitions along geometrical ranges. Blocks connect to each other and assemble into polymorphic ring-shaped clusters via the stacking of DNA blunt-ends. Reconfiguration of the polymorphic clusters is achieved by the surface diffusion on mica substrate in response to a monovalent salt concentration. This work could inspire novel reconfigurable self-assembling systems for applications in molecular robotics.

  17. Methods for Setting up a Three-Dimensional Industrial Surveying System of "Building Blocks Type"

    Institute of Scientific and Technical Information of China (English)

    FENG Wenhao

    2004-01-01

    This paper is to advance some relevant techniques to set up a three-dimensional industrial surveying system of "building blocks type", making use of the electronic theodolite, standard ruler and portable computer.

  18. A Working Model of Protein Synthesis Using Lego(TM) Building Blocks.

    Science.gov (United States)

    Templin, Mark A.; Fetters, Marcia K.

    2002-01-01

    Uses Lego building blocks to improve the effectiveness of teaching about protein synthesis. Provides diagrams and pictures for a 2-3 day student activity. Discusses mRNA, transfer RNA, and a protein synthesis model. (MVL)

  19. Silicon-Carbide (SIC) Multichip Power Modules (MCPMS) For Power Building Block Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project seeks to prove the feasibility of developing high power density modular power electronic building blocks...

  20. A NEW STRATEGY FOR THE DESIGN OF LIQUID CRYSTALLINE POLYMERS WITH FLEXIBLE AND APOLAR BUILDING BLOCKS

    Institute of Scientific and Technical Information of China (English)

    K.C. Gupta; H.K. Abdulkadir; S. Chand

    2003-01-01

    The synthesis and characterization of a new series of liquid crystalline polymers, poly(dicycloalkyl vinylterephthalate)s, are reported. The basic building blocks of these polymers are not mesogenic by themselves. However,very stable mesophases can be generated by self-assembly of the polymer molecules. This approach suggests a novel design strategy of liquid crystalline polymers with flexible and apolar building blocks.

  1. Supramolecular assemblies based on 2-ureido-4[1H]-pyrimidinone building block

    Institute of Scientific and Technical Information of China (English)

    WANG Sumin; WU Lizhu; ZHANG Liping; TUNG Chenho

    2006-01-01

    With high association constants in nonpolar solvents, the quadruple hydrogen bonding arrays of 2-ureido-4[1H]-pyrimidinones are recently considered to be one of the ideal building blocks to construct the complicated and functional supramole- cular systems. In this paper, we review the latest achievements of the supramolecular assemblies based on 2-ureido-4[1H]-pyrimidinone AADD quadruple hydrogen bonding building blocks.

  2. Binding Blocks: Building the Universe One Nucleus at a Time

    Science.gov (United States)

    Diget, C. Aa.; Pastore, A.; Leech, K.; Haylett, T.; Lock, S.; Sanders, T.; Shelley, M.; Willett, H. V.; Keegans, J.; Sinclair, L.; Simpson, E. C.

    2017-01-01

    We present a new teaching and outreach activity based around the construction of a three-dimensional chart of isotopes using LEGO® bricks. The activity, "binding blocks", demonstrates nuclear and astrophysical processes through a seven-meter chart of all nuclear isotopes, built from over 26000 LEGO® bricks. It integrates A-Level and GCSE…

  3. Diatomaceous Fungal and Bacterial Building Blocks for Material Synthesis

    Science.gov (United States)

    2008-04-08

    duplexes, whereas the second method was geometrically based and used the enzyme T4- DNA ligase . During the last funding year the latter technique was...Blocks Using T4 DNA Ligase Most nanoparticle assembly studies have focused on the use of isotropically functionalized particles since there are very...5’-phosphate group of the AuNP oligonucleotide. T4 DNA ligase was added to the reaction E - F solution to catalyze the formation of a phosphodiester

  4. Trenches for building blocks of advanced planar components

    DEFF Research Database (Denmark)

    Haiyan, Ou

    2004-01-01

    Trenches are fundamental structures used to build advanced optical planar waveguide components. In this letter, the fabrication of trenches across silica-on-silicon waveguides using inductively coupled plasma etching is presented. These trenches were etched deep into the silicon substrate...

  5. Building an organic block storage service at CERN with Ceph

    Science.gov (United States)

    van der Ster, Daniel; Wiebalck, Arne

    2014-06-01

    Emerging storage requirements, such as the need for block storage for both OpenStack VMs and file services like AFS and NFS, have motivated the development of a generic backend storage service for CERN IT. The goals for such a service include (a) vendor neutrality, (b) horizontal scalability with commodity hardware, (c) fault tolerance at the disk, host, and network levels, and (d) support for geo-replication. Ceph is an attractive option due to its native block device layer RBD which is built upon its scalable, reliable, and performant object storage system, RADOS. It can be considered an "organic" storage solution because of its ability to balance and heal itself while living on an ever-changing set of heterogeneous disk servers. This work will present the outcome of a petabyte-scale test deployment of Ceph by CERN IT. We will first present the architecture and configuration of our cluster, including a summary of best practices learned from the community and discovered internally. Next the results of various functionality and performance tests will be shown: the cluster has been used as a backend block storage system for AFS and NFS servers as well as a large OpenStack cluster at CERN. Finally, we will discuss the next steps and future possibilities for Ceph at CERN.

  6. Explicit Building Block Multiobjective Evolutionary Computation: Methods and Applications

    Science.gov (United States)

    2005-06-16

    about the entire group without checking each and every member of the group - for any respectable cook knows someone only need sample a spoonful of soup to...tasting the BB soup is statistically described and from it, one can determine a BB’s goodness without checking the entire population. 2.4.2 Sampled Good...initialization, primordial and juxtaposition phases. The use of partially enumerative initialization builds a population of all combinations of BBs of size

  7. The Building Blocks of Life Move from Ground to Tree to Animal and Back to Ground

    Science.gov (United States)

    Davidson, E. A.

    2015-12-01

    I generally use combinations of big words to describe my science, such as biogeochemistry, ecosystem ecology, nutrient cycling, stoichiometry, tropical deforestation, land-use change, agricultural intensification, eutrophication, greenhouse gas emissions, and sustainable development. I didn't expect to use any of these words, but I was surprised that I couldn't use some others that seem simple enough to me, such as farm, plant, soil, and forest. I landed on "building blocks" as my metaphor for the forms of carbon, nitrogen, phosphorus, and other elements that I study as they cycle through and among ecosystems. I study what makes trees and other kinds of life grow. We all know that they need the sun and that they take up water from the ground, but what else do trees need from the ground? What do animals that eat leaves and wood get from the trees? Just as we need building blocks to grow our bodies, trees and animals also need building blocks for growing their bodies. Trees get part of their building blocks from the ground and animals get theirs from what they eat. When animals poop and when leaves fall, some of their building blocks return to the ground. When they die, their building blocks also go back to the ground. I also study what happens to the ground, the water, and the air when we cut down trees, kill or shoo away the animals, and make fields to grow our food. Can we grow enough food and still keep the ground, water, and air clean? I think the answer is yes, but it will take better understanding of how all of those building blocks fit together and move around, from ground to tree to animal and back to ground.

  8. Binding Blocks: building the Universe one nucleus at the time

    CERN Document Server

    Diget, C Aa; Leech, K; Haylett, T; Lock, S; Sanders, T; Shelley, M; Willett, H V; Keegans, J; Sinclair, L; Simpson, E C

    2016-01-01

    We present a new teaching and outreach activity based around the construction of a three-dimensional chart of isotopes using LEGO$^{\\copyright}$ bricks. The activity, \\emph{Binding Blocks}, demonstrates nuclear and astrophysical processes through a seven-meter chart of all nuclear isotopes, built from over 26,000 LEGO$^{\\copyright}$ bricks. It integrates A-level and GCSE curricula across areas of nuclear physics, astrophysics, and chemistry, including: nuclear decays (through the colours in the chart); nuclear binding energy (through tower heights); production of chemical elements in the cosmos; fusion processes in stars and fusion energy on Earth; as well as links to medical physics, particularly diagnostics and radiotherapy.

  9. Binding blocks: building the Universe one nucleus at a time

    Science.gov (United States)

    Diget, C. Aa; Pastore, A.; Leech, K.; Haylett, T.; Lock, S.; Sanders, T.; Shelley, M.; Willett, H. V.; Keegans, J.; Sinclair, L.; Simpson, E. C.; the Binding Blocks Collaboration

    2017-03-01

    We present a new teaching and outreach activity based around the construction of a three-dimensional chart of isotopes using \\text{LEG}{{\\text{O}}\\circledR} bricks5. The activity, binding blocks, demonstrates nuclear and astrophysical processes through a seven-meter chart of all nuclear isotopes, built from over 26 000 \\text{LEG}{{\\text{O}}\\circledR} bricks. It integrates A-Level and GCSE curricula across areas of nuclear physics, astrophysics, and chemistry, including: nuclear decays (through the colours in the chart); nuclear binding energy (through tower heights); production of chemical elements in the cosmos; fusion processes in stars and fusion energy on Earth; as well as links to medical physics, particularly diagnostics and radiotherapy.

  10. Experimental Study on Volume for Fly Ash of Building Block

    Directory of Open Access Journals (Sweden)

    Ling Wang

    2013-04-01

    Full Text Available Fly ash is a waste substance from thermal power plants, steel mills, etc. That is found in abundance in the world. It has polluted the environment, wasting the cultivated land. This study introduces an experimental research on fly ash being reused effectively, the study introduces raw materials of fly ash brick, production process and product inspection, fly ash content could be amounted to 40%~75%. High doping fly ash bricks are manufactured, which selects wet fly ash from the power plants, adding aggregate with reasonable ratio and additives with reasonable dosage and do the experimental research on manufacture products for properties, production technology and selection about technology parameter of production equipment. Index of strength grade and freezing-thawing resisting etc and the high doping fly ash brick building which we are working on can achieve the national standard on building materials industry. Based on the tests, this achievement of research has a very wide practical prospect in using fly ash, industrial waste residue, environmental protection and reducing the cost of enterprises. The efficient reuse of fly ash from coal boiler and power plants has very vital significance of protecting the environment, benefiting descendants and developing of circular economy.

  11. Biobased building blocks for the rational design of renewable block polymers.

    Science.gov (United States)

    Holmberg, Angela L; Reno, Kaleigh H; Wool, Richard P; Epps, Thomas H

    2014-10-14

    Block polymers (BPs) derived from biomass (biobased) are necessary components of a sustainable future that relies minimally on petroleum-based plastics for applications ranging from thermoplastic elastomers and pressure-sensitive adhesives to blend compatibilizers. To facilitate their adoption, renewable BPs must be affordable, durable, processable, versatile, and reasonably benign. Their desirability further depends on the relative sustainability of the renewable resources and the methods employed in the monomer and polymer syntheses. Various strategies allow these BPs' characteristics to be tuned and enhanced for commercial applications, and many of these techniques also can be applied to manipulate the wide-ranging mechanical and thermal properties of biobased and self-assembling block polymers. From feedstock to application, this review article highlights promising renewable BPs, plus their material and assembly properties, in support of de novo design strategies that could revolutionize material sustainability.

  12. Building blocks X-FAB SOI 0.18 μm

    Science.gov (United States)

    Cizel, J.-B.; Ahmad, S.; Callier, S.; Cornat, R.; Dulucq, F.; Fleury, J.; Martin-Chassard, G.; Raux, L.; de La Taille, C.; Thienpont, D.

    2015-02-01

    This work has been done in order to study a new technology provided by X-FAB named xt018. It is an SOI (Silicon On Insulator) technology with a minimal gate length of 180 nm. Building blocks have been done to test the advantages and drawbacks of this technology compared to the one currently used (AMS SiGe 0.35 μm). These building blocks have been designed to fit in an existing experience housed by the CALICE collaboration: the read-out chip for the Electromagnetic CALorimeter (ECAL) of the foreseen International Linear Collider (ILC). Performances will be compared to those of the SKIROC2 chip designed by the OMEGA laboratory, trying to fit the same requirements. The chip is being manufactured and will be back for measurements in December, the displayed results are only simulation results and thus the conclusions concerning the performances of these building blocks are subject to change.

  13. Solid-phase route to Fmoc-protected cationic amino acid building blocks

    DEFF Research Database (Denmark)

    Clausen, Jacob Dahlqvist; Linderoth, Lars; Nielsen, Hanne Mørck;

    2012-01-01

    a freshly prepared trityl bromide resin, followed by ring opening with an appropriate primary amine, on-resin N(ß)-Boc protection of the resulting secondary amine, exchange of the N(a)-protecting group, cleavage from the resin, and finally oxidation in solution to yield the target ¿-aza substituted building...... blocks having an Fmoc/Boc protection scheme. This strategy facilitates incorporation of multiple positive charges into the building blocks provided that the corresponding partially protected di- or polyamines are available. An array of compounds covering a wide variety of ¿-aza substituted analogs...

  14. Molecular Building Blocks for Nanotechnology From Diamondoids to Nanoscale Materials and Applications

    CERN Document Server

    Mansoori, G. Ali; Assoufid, Lahsen; Zhang, Guoping

    2007-01-01

    This book is a result of the research and educational activities of a group of outstanding scientists worldwide who have authored the chapters of this book dealing with the behavior of nanoscale building blocks. It contains a variety of subjects covering computational, dry and wet nanotechnology. The state-of-the-art subject matters presented here provide the reader with the latest developments on ongoing nanoscience and nanotechnology research from the bottom-up approach, which starts with with atoms and molecules as molecular building blocks.

  15. Origami-inspired building block and parametric design for mechanical metamaterials

    Science.gov (United States)

    Jiang, Wei; Ma, Hua; Feng, Mingde; Yan, Leilei; Wang, Jiafu; Wang, Jun; Qu, Shaobo

    2016-08-01

    An origami-based building block of mechanical metamaterials is proposed and explained by introducing a mechanism model based on its geometry. According to our model, this origami mechanism supports response to uniaxial tension that depends on structure parameters. Hence, its mechanical properties can be tunable by adjusting the structure parameters. Experiments for poly lactic acid (PLA) samples were carried out, and the results are in good agreement with those of finite element analysis (FEA). This work may be useful for designing building blocks of mechanical metamaterials or other complex mechanical structures.

  16. RNA LEGO: magnesium-dependent assembly of RNA building blocks through loop-loop interactions.

    Science.gov (United States)

    Horiya, Satoru; Li, Xianglan; Kawai, Gota; Saito, Ryota; Katoh, Akira; Kobayashi, Koh; Harada, Kazuo

    2002-01-01

    We describe the construction of nano-molecular assemblies using RNA building blocks the human immunodeficiency virus type 1 (HIV-1) dimerization initiation site (DIS) RNA, that forms stable base pairing through a magnesium-dependent loop-loop interaction ("kissing"). RNA building blocks containing two DIS or DIS-like hairpins connected by a two nucleotide linker self-assembled to form specific structures as observed by non-denaturing polyacrylamide gel electrophoresis (PAGE). Furthermore, observation of "real time" formation of the molecular assemblies by circular dichroism (CD) spectroscopy was attempted.

  17. Quantitative NMR Approach to Optimize the Formation of Chemical Building Blocks from Abundant Carbohydrates

    DEFF Research Database (Denmark)

    Elliot, Samuel Gilbert; Tolborg, Søren; Sádaba, Irantzu

    2017-01-01

    The future role of biomass-derived chemicals relies on the formation of diverse functional monomers in high yields from carbohydrates. Recently, it has become clear that a series of α-hydroxy acids, esters and lactones can be formed from carbohydrates in alcohols and water using tin......-containing catalysts such as Sn-Beta. These compounds are potential building blocks for polyesters with additional olefin and alcohol functionalities. We employ an NMR approach to identify, quantify and optimize the formation these building blocks in the chemocatalytic transformation of abundant carbohydrates by Sn...

  18. Polyphospholyl ligands as building blocks for the formation of polymeric and spherical assemblies

    OpenAIRE

    Heindl, Claudia

    2016-01-01

    This thesis is concerned with polyphospholyl ligands as building blocks for the formation of polymeric and spherical assemblies. Within the scope of this work, the coordination chemistry of 1,2,4-triphosphaferrocenes, 1,2,4-triphospholyl anions and pentaphosphaferrocenes towards Cu(I) halides is investigated. Thereby, the first two substance classes preferably tend to the build-up of novel one-, two- and three-dimensional polymers bearing rather uncommon or even unprecedented structural motif...

  19. LEGO® bricks as building blocks for centimeter-scale biological environments: the case of plants.

    Directory of Open Access Journals (Sweden)

    Kara R Lind

    Full Text Available LEGO bricks are commercially available interlocking pieces of plastic that are conventionally used as toys. We describe their use to build engineered environments for cm-scale biological systems, in particular plant roots. Specifically, we take advantage of the unique modularity of these building blocks to create inexpensive, transparent, reconfigurable, and highly scalable environments for plant growth in which structural obstacles and chemical gradients can be precisely engineered to mimic soil.

  20. LEGO® bricks as building blocks for centimeter-scale biological environments: the case of plants.

    Science.gov (United States)

    Lind, Kara R; Sizmur, Tom; Benomar, Saida; Miller, Anthony; Cademartiri, Ludovico

    2014-01-01

    LEGO bricks are commercially available interlocking pieces of plastic that are conventionally used as toys. We describe their use to build engineered environments for cm-scale biological systems, in particular plant roots. Specifically, we take advantage of the unique modularity of these building blocks to create inexpensive, transparent, reconfigurable, and highly scalable environments for plant growth in which structural obstacles and chemical gradients can be precisely engineered to mimic soil.

  1. Media Peace Discourse: Constraints, Concepts and Building Blocks

    Directory of Open Access Journals (Sweden)

    Dov Shinar

    2004-07-01

    Full Text Available Normative, professional, and academic premises steer the discussion of the importance and the absence of a peace discourse in the media, and of the need and possibility to invent one. Among the possible points of departure are that the media should be involved in the promotion of peace; that peace coverage is hindered by the absence of a peace discourse in the professional media repertoire; and that the creation, development, and marketing of a media peace discourse should be included in the current research agenda. The development of a peace-oriented media discourse can be assisted by three conceptual elements, namely, the existing strategies employed by the media to cover peace; the competition in the media among dominant and alternative frames, in which news-value is the measure of success; and the concept of “constitutive rhetoric” – the creation, change and legitimization of realities through texts, rhetorical constructs and the manipulation of symbols – as a discourse-building device. Research on the three major strategies used by the media in the coverage of peace – Framing Peace Coverage in War Discourse; Trivialization; and Ritualization – suggests that the latter fits this conceptual framework better than the others, and thus is more suitable for the development of a media peace discourse. Some findings and models of media research can be used for conceptual leverage by providing paradigmatic frameworks and variables. Good examples include the media events and the textual analysis genres, as they are particularly related to professional effects; narrative techniques; and performance styles; and concepts such as “master-frames” and “super-texts” – major motifs, composed of many smaller frames or sub-texts – to suggest the potential contents of a media peace discourse. Finally, it is proposed that research and development efforts of media peace coverage along these lines should include work on adapting the current

  2. Benefits of a translucent building envelope made of DSC-integrated glass blocks

    OpenAIRE

    2015-01-01

    The aim of this paper is to analyse the benefits deriving from the replacement of the glazed façades of an office building located in Palermo (Sicily) with a new translucent BIPV envelope made of multifunctional glass block panels integrated with Dye-sensitized Solar Cells (DSCs). The analysed 11-storey building is cladded by a curtain wall determining high management costs, especially during summer, in order to maintain indoor comfort. After the design of the building envelope and of the com...

  3. Trainer's Guide to Building Blocks for Teaching Preschoolers with Special Needs [CD-ROM

    Science.gov (United States)

    Joseph, Gail E.; Sandall, Susan R.; Schwartz, Ilene S.

    2010-01-01

    An essential teaching companion for instructors of pre-K educators, this convenient CD-ROM is a vivid blueprint for effective inclusive education using the popular "Building Blocks" approach. Following the structure of the bestselling textbook, this comprehensive guide helps teacher educators provide effective instruction on the three types of…

  4. N-Unsubstituted and N-Arylated Fulleropyrrolidines: New Useful Building Blocks for C60 Functionalization

    Institute of Scientific and Technical Information of China (English)

    TONG,Chen-Hua; WU,Zong-Quan; HOU,Jun-Li; LI,Zhan-Ting

    2006-01-01

    Two series of stable and soluble fulleropyrrolidines have been prepared from the reactions of C60, glycine or its N-arylated derivatives and aliphatic aldehydes or ketones in refluxing toluene or chlorobenzene. The new C60 derivatives represent new useful building blocks for further preparation of more funcionalized C60 derivatives.

  5. A novel method to highly versatile monomeric PNA building blocks by multi component reactions

    NARCIS (Netherlands)

    Dömling, Alexander; Chi, Kai-Zu; Barrère, Mathieux

    1999-01-01

    A novel approach to monomeric PNA building blocks by a solution phase Ugi multi component reaction (MCR) is described. The reaction is easily performed in 96 well plates. The products precipitate from the reaction solution and are thus obtained in high yields and purity. Those products are not amena

  6. Fluorinated building blocks for next-generation polymer electrolyte membrane fuel cells

    NARCIS (Netherlands)

    Wadekar, M.N.

    2012-01-01

    The purpose of this thesis is to design, create and study basic building blocks for the construction of self-assembled nanostructured electrodes and membranes for PEMFC. The research described deals with the synthesis of polymerizable fluorosurfactant (1) and its non-polymerizable analogue (2) and t

  7. Chromophores arranged as "magnetic meta atoms": building blocks for molecular metamaterials.

    Science.gov (United States)

    Langhals, Heinz; Hofer, Alexander

    2013-06-21

    Benzoperylenetriscarboximides were parallel arranged by stiff spacers where exciton interactions could be controlled by their distance. The most bathochromic electronic transition of the chromophores essentially exhibits only an electric component where an orthogonal magnetic component was established by the distance-controlled interaction of chromophores. Such arrangements were discussed as building blocks for molecular metamaterials.

  8. Green building blocks for biobased plastics: biobased processes and market development

    NARCIS (Netherlands)

    Harmsen, P.F.H.; Hackmann, M.M.

    2013-01-01

    From a chemical perspective, nearly all building blocks for plastics can be made using renewable raw materials. However, not every process is commercially feasible. Processes often remain inefficient, products have insufficient purity or the raw materials are simply too expensive. This publication p

  9. Using Interlocking Toy Building Blocks to Assess Conceptual Understanding in Chemistry

    Science.gov (United States)

    Geyer, Michael J.

    2017-01-01

    A current emphasis on teaching conceptual chemistry via the particulate nature of matter has led to the need for new, effective ways to assess students' conceptual understanding of this view of chemistry. This article provides a simple, inexpensive way to use interlocking toy building blocks (e.g., LEGOs) in both formative and summative…

  10. Dimeric Building Blocks for Solid-Phase Synthesis of α-Peptide-β-Peptoid Chimeras

    DEFF Research Database (Denmark)

    Seigan, Gitte Bonke; Vedel, Line; Matthias, Witt,

    2008-01-01

    Recently, a novel type of antimicrobial and proteolytically stable peptidomimetic oligomers having an α-peptide-β-peptoid chimeric backbone was reported. The present paper describes efficient protocols for the preparation of a wide range of dimeric building blocks, displaying different types of s...

  11. Para-Functionalized NCN-Pincer Palladium and Platinum Complexes as Building Blocks in Organometallic Chemistry

    NARCIS (Netherlands)

    Slagt, Martijn Quico

    2002-01-01

    A rapidly evolving field in chemistry is the application of organometallic and coordination complexes as building blocks or active components for the construction of new materials exhibiting specific catalytic, redox, optical or sensor activities. A central theme in the construction of these inorgan

  12. Solution scattering studies on a virus capsid protein as a building block for nanoscale assemblies

    NARCIS (Netherlands)

    Comellas Aragones, M.; Comellas-Aragones, Marta; Sikkema, Friso D.; Delaittre, Guillaume; Terry, Ann E.; King, Stephen M.; Visser, Dirk; Heenan, Richard K.; Nolte, Roeland J.M.; Cornelissen, Jeroen Johannes Lambertus Maria; Feiters, Martin C.

    2011-01-01

    Self-assembled protein cages are versatile building blocks in the construction of biomolecular nanostructures. Because of the defined assembly behaviour the cowpea chlorotic mottle virus (CCMV) protein is often used for such applications. Here we report a detailed solution scattering study of the

  13. Sequential insertion of three different organometallics into a versatile building block containing a PNA backbone.

    Science.gov (United States)

    Patra, Malay; Gasser, Gilles; Bobukhov, Dmytro; Merz, Klaus; Shtemenko, Alexander V; Metzler-Nolte, Nils

    2010-06-28

    In the view of developing a synthetic route for the controlled insertion of distinct organometallic moieties into peptide nucleic acid (PNA) oligomers, a proof-of-principle study of the chemoselective insertion of three different organometallics into a building block containing both a PNA backbone and an alkyne side-chain is presented in this study.

  14. Atomic structure and handedness of the building block of a biological assembly.

    Science.gov (United States)

    Loquet, Antoine; Habenstein, Birgit; Chevelkov, Veniamin; Vasa, Suresh Kumar; Giller, Karin; Becker, Stefan; Lange, Adam

    2013-12-26

    Noncovalent supramolecular assemblies possess in general several unique subunit-subunit interfaces.The basic building block of such an assembly consists of several subunits and contains all unique interfaces. Atomic-resolution structures of monomeric subunits are typically accessed by crystallography or solution NMR and fitted into electron microscopy density maps. However, the structure of the intact building block in the assembled state remains unknown with this hybrid approach. Here, we present the solid-state NMR atomic structure of the building block of the type III secretion system needle. The building block structure consists of a homotetrameric subunit complex with three unique supramolecular interfaces. Side-chain positions at the interfaces were solved at atomic detail. The high-resolution structure reveals unambiguously the helical handedness of the assembly, determined to be right-handed for the type III secretion system needle.Additionally, the axial rise per subunit could be extracted from the tetramer structure and independently validated by mass-per-length measurements.

  15. Synthesis of N-protected Galactosamine Building Blocks from D-Tagatose via the Heyns Rearrangement

    DEFF Research Database (Denmark)

    Wrodnigg, Tanja M.; Lundt, Inge; Stütz, Arnold E.

    2006-01-01

    N-Acetyl-D-galactosamine (11), a very important naturally occurring building block of oligosaccharides, is easily accessible via the Heyns rearrangement of D-tagatose (3) with benzylamine. The short and efficient synthesis of various differently N-protected D-galactosamine derivatives is reported....

  16. Extended structure design with simple molybdenum oxide building blocks and urea as a directing agent

    NARCIS (Netherlands)

    Veen, S.J.; Roy, S.; Filinchuk, Y.; Chernyshov, D.; Petukhov, A.V.; Versluijs-Helder, M.; Broersma, A.; Soulimani, F.; Visser, T.; Kegel, W.K.

    2008-01-01

    We report here a simple one-pot directed synthesis of an oxomolybdate urea composite in which elementary molybdenum oxide building blocks are linked together with the aid of urea. This type of directed material design resulted in large rod-like crystals of an inorganic-organic hybrid extended struct

  17. Para-Functionalized NCN-Pincer Palladium and Platinum Complexes as Building Blocks in Organometallic Chemistry

    NARCIS (Netherlands)

    Slagt, Martijn Quico

    2002-01-01

    A rapidly evolving field in chemistry is the application of organometallic and coordination complexes as building blocks or active components for the construction of new materials exhibiting specific catalytic, redox, optical or sensor activities. A central theme in the construction of these inorgan

  18. Bilberry xyloglucan - novel building blocks containing ß-xylose within a complex structure

    NARCIS (Netherlands)

    Hilz, H.; Jong, de L.E.; Kabel, M.A.; Verhoef, R.P.; Schols, H.A.; Voragen, A.G.J.

    2007-01-01

    Bilberries are known to have one of the most complex xyloglucan structures described in the plant kingdom until now. To characterise this structure, xyloglucans were enzymatically degraded and the oligosaccharides obtained were analysed. More than 20 different building blocks were found to make up t

  19. The assembly of supramolecular boxes and coordination polymers based on bis-zinc-salphen building blocks

    NARCIS (Netherlands)

    Kuil, M.; Puijk, I.M.; Kleij, A.W.; Tooke, D.M.; Spek, A.L.; Reek, J.N.H.

    2009-01-01

    We report the assembly of supramolecular boxes and coordination polymers based on a rigid bis-zinc(II)-salphen complex and various ditopic nitrogen ligands. The use of the bis-zinc(II)-salphen building block in combination with small ditopic nitrogen ligands gave organic coordination polymers both

  20. Prototypic implementations of the building block for component based open Hypermedia systems (BB/CB-OHSs)

    DEFF Research Database (Denmark)

    Mohamed, Omer I. Eldai

    2005-01-01

    In this paper we describe the prototypic implementations of the BuildingBlock (BB/CB-OHSs) that proposed to address some of the Component-based Open Hypermedia Systems (CB-OHSs) issues, including distribution and interoperability [4, 11, 12]. Four service implementations were described below...

  1. The Exploitation of Versatile Building Blocks for the Self-Assembly of Novel Molecular Magnets

    Science.gov (United States)

    Pilkington, M.; Gross, M.; Franz, P.; Biner, M.; Decurtins, S.; Stoeckli-Evans, H.; Neels, A.

    2001-07-01

    Using molecular building blocks to self-assemble lattices supporting long-range magnetic order is currently an active area of solid-state chemistry. Consequently, it is the realm of supramolecular chemistry that synthetic chemists are turning to in order to develop techniques for the synthesis of structurally well-defined supramolecular materials. In recent years we have investigated the versatility and usefulness of two classes of molecular building blocks, namely, tris-oxalato transition-metal (M. Pilkington and S. Decurtins, in "Magnetoscience-From Molecules to Materials," Wiley-VCH, 2000), and octacyanometalate complexes (Pilkington and Decurtins, Chimia 54, 593 (2001)), for applications in the field of molecule-based magnets. Anionic, tris-chelated oxalato building blocks are able to build up two-dimensional honeycomb-layered structural motifs as well as three-dimensional decagon frameworks. The discrimination between the crystallization of the two- or three-dimensional structures relies on the choice of the templating counterions (Decurtins, Chimia 52, 539 (1998); Decurtins et al. Mol. Cryst. Liq. Cryst. 273, 167 (1995); New J. Chem. 117 (1998)). These structural types display a range of ferro, ferri, and antiferromagnetic properties (Pilkington and Decurtins, in "Magnetoscience-From Molecules to Materials"). Octacyanometalate building blocks self-assemble to afford two new classes of cyano-bridged compounds namely, molecular clusters and extended three dimensional networks (J. Larionova et al., Angew. Chem. Int. Ed. 39, 1605 (2000); Pilkington et al., in preparation). The molecular cluster with a MnII9MoV6 core has the highest ground state spin value, S=51/2, reported to-date (Larionova et al., Angew. Chem. Int. Ed. 39, 1605 (2000)). In the high-temperature regime, the magnetic properties are characterized by ferromagnetic intracluster coupling. In the magnetic range below 44 K, the magnetic cluster signature is lost as possibly a bulk behavior starts to

  2. Interlocking Toy Building Blocks as Hands-On Learning Modules for Blind and Visually Impaired Chemistry Students

    Science.gov (United States)

    Melaku, Samuel; Schreck, James O.; Griffin, Kameron; Dabke, Rajeev B.

    2016-01-01

    Interlocking toy building blocks (e.g., Lego) as chemistry learning modules for blind and visually impaired (BVI) students in high school and undergraduate introductory or general chemistry courses are presented. Building blocks were assembled on a baseplate to depict the relative changes in the periodic properties of elements. Modules depicting…

  3. On the interconnection of clusters and building blocks in barley amylopectin.

    Science.gov (United States)

    Källman, Anna; Bertoft, Eric; Koch, Kristine; Åman, Per; Andersson, Roger

    2013-04-01

    Amylopectin is a highly branched starch component built up of a large number of clustered α-D-glucose chains. A single C-chain possesses the reducing end and carries the rest of the macromolecule. The aim of this study was to investigate the interconnection of clusters and domains (groups of clusters) in barley amylopectin by isolation of the units with α-amylolysis and subsequent labelling of the C-chain in the φ,β-limit dextrins of these structural units with the fluorescent compound 2-aminopyridine. Because these C-chains were formed by α-amylolysis of B-chains in amylopectin, they were designated bc-chains to be distinguished from C-chains in amylopectin. Four barley samples were selected for the study, of which two had the amo1 genetic background. Longer bc-chains were found in domains suggesting their role in cluster interconnection. The average chain length of bc-chains was longer than the average chain length of B-chains and the size-distribution of the bc-chains was unimodal implying that the bc-chains comprise a unique category of chains. Extensive α-amylolysis of labelled amylopectin and clusters revealed the distribution of branched building blocks situated at the reducing end of these molecules. Any type of size group of building blocks can be situated at the reducing end, because the size-distribution of these blocks was similar to the distribution of all building blocks present in the sample. This suggested certain randomness in the distribution of the types of building blocks within the amylopectin macromolecule.

  4. Synthesis of homo- and heteromultivalent carbohydrate-functionalized oligo(amidoamines using novel glyco-building blocks

    Directory of Open Access Journals (Sweden)

    Felix Wojcik

    2013-11-01

    Full Text Available We present the solid phase synthesis of carbohydrate-functionalized oligo(amidoamines with different functionalization patterns utilizing a novel alphabet of six differently glycosylated building blocks. Highly efficient in flow conjugation of thioglycosides to a double-bond presenting diethylentriamine precursor is the key step to prepare these building blocks suitable for fully automated solid-phase synthesis. Introduction of the sugar ligands via functionalized building blocks rather than postfunctionalization of the oligomeric backbone allows for the straightforward synthesis of multivalent glycoligands with full control over monomer sequence and functionalization pattern. We demonstrate the potential of this building-block approach by synthesizing oligomers with different numbers and spacing of carbohydrates and also show the feasibility of heteromultivalent glycosylation patterns by combining building blocks presenting different mono- and disaccharides.

  5. Coarse-Grained Simulations of the Self-Assembly of DNA-Linked Gold Nanoparticle Building Blocks

    Science.gov (United States)

    Armistead, Charles

    The self-assembly of nanoparticles (NPs) of varying shape, size, and composition for the purpose of constructing useful nanoassemblies with tailored properties remains challenging. Although progress has been made to design anisotropic building blocks that exhibit the required control for the precise placement of various NPs within a defined arrangement, there still exists obstacles in the technology to maximize the programmability in the self-assembly of NP building blocks. Currently, the self-assembly of nanostructures involves much experimental trial and error. Computational modeling is a possible approach that could be utilized to facilitate the purposeful design of the self-assembly of NP building blocks into a desired nanostructure. In this report, a coarse-grained model of NP building blocks based on an effective anisotropic mono-functionalization approach, which has shown the ability to construct six building block configurations, was used to simulate various nanoassemblies. The purpose of the study was to validate the model's ability to simulate the self-assembly of the NP building blocks into nanostructures previously produced experimentally. The model can be programmed to designate up to six oligonucleotides attached to the surface of a Au NP building block, with a modifiable length and nucleotide sequence. The model successfully simulated the self-assembly of Au NP building blocks into a number of previously produced nanostructures and demonstrated the ability to produce visualizations of self-assembly as well as calculate interparticle distances and angles to be used for the comparison with the previous experimental data for validation of the model. Also, the model was used to simulate nanoassemblies which had not been produced experimentally for its further validation. The simulations showed the capability of the model to use specific NP building blocks and self-assemble. The coarse-grained NP building block model shows promise as a tool to complement

  6. MUC1 in human milk blocks transmission of human immunodeficiency virus from dendritic cells to T cells

    NARCIS (Netherlands)

    Saeland, E.; Jong, de M.A.W.P.; Nabatov, A.; Kalay, H.; Kooijk, van Y.; Geijtenbeek, T.B.H.

    2009-01-01

    Mother-to-child transmission of human immunodeficiency virus-1 (HIV-1) occurs frequently via breast-feeding. HIV-1 targets DC-SIGN+ dendritic cells (DCs) in mucosal areas that allow efficient transmission of the virus to T cells. Here, we demonstrate that the epithelial mucin MUC1, abundant in milk,

  7. MUC1 in human milk blocks transmission of human immunodeficiency virus from dendritic cells to T cells

    NARCIS (Netherlands)

    Saeland, E.; Jong, de M.A.W.P.; Nabatov, A.; Kalay, H.; Kooijk, van Y.; Geijtenbeek, T.B.H.

    2009-01-01

    Mother-to-child transmission of human immunodeficiency virus-1 (HIV-1) occurs frequently via breast-feeding. HIV-1 targets DC-SIGN+ dendritic cells (DCs) in mucosal areas that allow efficient transmission of the virus to T cells. Here, we demonstrate that the epithelial mucin MUC1, abundant in milk,

  8. An analog implementation of biologically plausible neurons using CCII building blocks.

    Science.gov (United States)

    Sharifipoor, Ozra; Ahmadi, Arash

    2012-12-01

    This study presents an analog implementation of the spiking neurons based on a piecewise-linear model. This model is a variation of the Izhikevich model, which is capable of reproducing different dynamic behaviors. The proposed circuit utilizes second generation current conveyors (CCII) building blocks. With the same topology and circuit values, this circuit can produce a wide variety of neuron behaviors just by tuning the reference current and voltage sources. In addition, since CCII can be considered as a building block for programmable analog arrays, based on the proposed circuit different neuron types can be implemented on programmable analog platforms. Simulation results are presented for different neuron behaviors with CMOS 350 nm ±1.5 V technology using HSPICE. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Sinusoidal oscillators and waveform generators using modern electronic circuit building blocks

    CERN Document Server

    Senani, Raj; Singh, V K; Sharma, R K

    2016-01-01

    This book serves as a single-source reference to sinusoidal oscillators and waveform generators, using classical as well as a variety of modern electronic circuit building blocks. It provides a state-of-the-art review of a large variety of sinusoidal oscillators and waveform generators and includes a catalogue of over 600 configurations of oscillators and waveform generators, describing their relevant design details and salient performance features/limitations. The authors discuss a number of interesting, open research problems and include a comprehensive collection of over 1500 references on oscillators and non-sinusoidal waveform generators/relaxation oscillators. Offers readers a single-source reference to everything connected to sinusoidal oscillators and waveform generators, using classical as well as modern electronic circuit building blocks; Provides a state-of-the-art review of a large variety of sinusoidal oscillators and waveform generators; Includes a catalog of over 600 configurations of oscillato...

  10. Synthesis of bio-based building blocks from vegetable oils: a platform chemicals approach

    Directory of Open Access Journals (Sweden)

    Desroches Myriam

    2013-01-01

    Full Text Available This review reports the synthesis of various building blocks from vegetable oils in one or two-steps syntheses. Thiol-ene coupling allows to synthesize new biobased reactants with various function and functionality with reaction conditions in agreement with green chemistry principles: it does not use neither solvent nor initiator or need simple purification step, feasible at industrial scale. Esterification and amidification were also used to insert ester or amide groups in fatty chains in order to modifiy properties of thereof synthesized polymers. Building blocks synthesized have various functions and functionality: polyols, polyacids, polyamines and dicyclocarbonates from vegetable oils and from glycerine derivatives. They were used for the synthesis of biobased polyurethanes, polyhydroxyurethanes and epoxy resins.

  11. Cement stabilized red earth as building block and structural pavement layer

    Directory of Open Access Journals (Sweden)

    G.V. RAMA SUBBARAO

    2014-12-01

    Full Text Available Red Earth is most commonly used as material in the building and road construction. Many a times, the red earth found in various quarries is found not suitable for construction. Cement of 4 and 8% of dry mass of red earth was added to improve its suitability as building block and structural pavement material. To know the influence of waste plastic fiber on cement stabilized red earth, 1% fiber was also added to the mixture. It is shown that the compressive strength of cement stabilized red earth blocks was improved with seven days of curing. The addition of cement to red earth enhanced soaked CBR value. The soaked CBR value of fiber reinforced cement stabilized red earth was about 1.3 to 1.5 times that of unreinforced cement stabilized red earth.

  12. Quantitative NMR Approach to Optimize the Formation of Chemical Building Blocks from Abundant Carbohydrates.

    Science.gov (United States)

    Elliot, Samuel G; Tolborg, Søren; Sádaba, Irantzu; Taarning, Esben; Meier, Sebastian

    2017-07-21

    The future role of biomass-derived chemicals relies on the formation of diverse functional monomers in high yields from carbohydrates. Recently, it has become clear that a series of α-hydroxy acids, esters, and lactones can be formed from carbohydrates in alcohol and water solvents using tin-containing catalysts such as Sn-Beta. These compounds are potential building blocks for polyesters bearing additional olefin and alcohol functionalities. An NMR approach was used to identify, quantify, and optimize the formation of these building blocks in the Sn-Beta-catalyzed transformation of abundant carbohydrates. Record yields of the target molecules can be achieved by obstructing competing reactions through solvent selection. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Pyrrolic Amide: A New Hydrogen Bond Building Block for Self-assembly

    Institute of Scientific and Technical Information of China (English)

    YIN Zhen-Ming; LI Jian-Feng; HE Jia-Qi; ZHU Xiao-Qing; CHENG Jin-Pei

    2003-01-01

    @@ Molecular self-assembly has emerged as a powerful technology for the synthesis of nanostructured materials. In design of various molecular assemblies, hydrogen bonding is a preferably selected intra- or inter-molecular weak interaction in recent research by virtue of the directionality and specificity. The research for novel hydrogen bond building blocks that self-assembly into well defined structures is great important not only for gaining an understanding of the concepts of self-assembly but also for the design of new molecular materials. Pyrrolic amide moiety has one hydrogen bond acceptor (C =O) and two hydrogen bond donors (pyrrole NH and amide NH). By deliberately design, pyrrolic amide compounds would be new kinds hydrogen bond building blocks. So, pyrrolic amide compounds 1 ~ 6, which bear one, two or three pyrrolic amide moieties respectively, were designed and synthesized.

  14. Fragmented Agrarian Space: Building Blocks and Modernisation Trajectories. The Case of Slovenia

    Directory of Open Access Journals (Sweden)

    Slavič Irma Potočnik

    2017-06-01

    Full Text Available Production, processing and consumption within Slovenian agrarian space are fragmented due to physical constraints (72.4% of the territory categorised as ANC and socio-geographic factors. Based on available data, five essential building blocks of contemporary Slovenian agrarian space (available land, change management, integrated circular economy, adjustable policies, and flexibility of institutions are discussed. Interrelations among the building blocks shape the modernisation trajectories of approx. 70,000 agricultural holdings in Slovenia. The coexistence of three modernisation trajectories, i.e. practised autarky, various forms of pluri-activity, and small-scale intensive and innovative modernisation, creates a complex mosaic. The governance of multifunctional and multi-structured agrarian space is becoming more demanding.

  15. Optimal allocation of building blocks between nutrient uptake systems in a microbe.

    Science.gov (United States)

    van den Berg, Hugo A; Kiselev, Yuri N; Orlov, Michael V

    2002-03-01

    A bacterial cell must distribute its molecular building blocks among various types of nutrient uptake systems. If the microbe is to maximize its average growth rate, this allocation of building blocks must be adjusted to the environmental availabilities of the various nutrients. The adjustments can be found from growth balancing considerations. We give a full proof of optimality and uniqueness of the optimal allocation regime for a simple model of microbial growth and internal stores kinetics. This proof suggests likely candidates for optimal control regimes in the case of a more realistic model. These candidate regimes differ with respect to the information that the cell's control system must have access to. We pay particular attention to one of the three candidates, a feedback regime based on a cellular control system that monitors only internal reserve densities. We show that allocation converges rapidly to balanced growth under this control regime.

  16. Functional Perfluoroalkyl Polyhedral Oligomeric Silsesquioxane (F-POSS): Building Blocks for Low Surface Energy Materials

    Science.gov (United States)

    2010-10-21

    Technical Paper 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Functional Perfluoroalkyl Polyhedral Oligomeric Silsesquioxane (F...long chain fluorinated alkyl groups ranging from 6-12 carbon atoms in length. Herein, a disilanol perfluoroalkyl polyhedral oligomeric...FUNCTIONAL PERFLUOROALKYL POLYHEDRAL OLIGOMERIC SILSESQUIOXANES (F-POSS): BUILDING BLOCKS FOR LOW SURFACE ENERGY MATERIA LS Sean M Rami,.e:, Yvonne Dia

  17. Prototypic implementations of the building block for component based open Hypermedia systems (BB/CB-OHSs)

    DEFF Research Database (Denmark)

    Mohamed, Omer I. Eldai

    2005-01-01

    In this paper we describe the prototypic implementations of the BuildingBlock (BB/CB-OHSs) that proposed to address some of the Component-based Open Hypermedia Systems (CB-OHSs) issues, including distribution and interoperability [4, 11, 12]. Four service implementations were described below. The....... These are the math service, navigational service, naming and location service and the storage service in addition to two communication protocols (TCP/IP and JAVA RMI)....

  18. Synthesis of 4-Halogenated 3-Fluoro-6-methoxyquinolines: Key Building Blocks for the Synthesis of Antibiotics

    DEFF Research Database (Denmark)

    Flagstad, Thomas; Petersen, Mette Terp; Hinnerfeldt, Daniel Michael

    2014-01-01

    A practical and scalable 4-step route is presented for the synthesis of 4-bromo-3-fluoro-6-methoxyoquinoline and 3-fluoro-4-iodo-6-methoxyoquinoline from readily available 2,4-dichloro-3-fluoroquinoline with an overall yield of 81-85%. Halogenated quinoline building blocks have found much use in ...... in antimicrobial drug discovery, and the method reported here would be useful for the synthesis of these compounds. © Georg Thieme Verlag....

  19. Technological characteristics of compressed earth blocks for its use as a building material

    Science.gov (United States)

    Gomez-Villalba, Luz Stella; Camacho-Perez, Nancy; Alvarez de Buergo, Monica; Becerra-Becerra, Javier; Esmeralda Corredor-Pulido, Dery; Fort, Rafael

    2013-04-01

    We present here an innovative building technique, which uses ecological, inexpensive and environmentally friendly materials. These compressed earth blocks seem to be very good for building purposes and that is why we have characterized three types of compressed earth blocks (CEB, named by their color as yellow, grey and red) mineralogically by means of X ray diffraction XRD and scanning electron microscopy SEM (both blocks and raw materials), petrographically by polarizing optical light microscopy POLM, and SEM, and, mainly, petrophysically: their hydric, physical and physico-mechanical properties by means of determining their capillary water absorption, porosity (open or accessible to water, pore size distribution and micro/macroporosity), and densities, color and ultrasound velocity (together with anisotropy). The particularities of these analyzed materials show that some varieties are more durable than others, and that all of them can be used as building materials with some restrictions related to their appropriate placing in the structures and the exposure to water. Acknowledgements: This work is supported by the GEOMATERIALES (S2009/MAT-1629) and CONSOLIDER-TCP (CSD2007-0058) programmes. Thanks also to the UCM (Complutense University of Madrid) Research Group "Alteración y conservación de los materiales pétreos del patrimonio" / Alteration and conservation of heritage stone materials (ref. 921349).

  20. Application of modified amino acid as a chiral building block in asymmetric synthesis

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Phenylglycine 1 as a representative of natural resourceful (-amino acid was modified by reduction and protection of functional group to afford the amino alcohol as a chiral building block 3. A new chiral compound, the chiral building block/spiro-cyclopropane derivative containing four stereogenic centers, compound 7, has been obtained in 52% yield with de≥98% via the tandem double Michael addition/internal nucleophilic substitution under mild condition of 5-l-menthyloxy-3-bromo-2-(5H)-furanone 4 with the nucleophilic reagent, the amino alcohol 3. The new chiral compound 7 is identified on the basis of its analytical data and spectroscopic data, such as UV, IR, 1H NMR, 13C NMR, MS and elementary analysis. The absolute configuration of the interesting spiro-cyclopropanes 7 was established by X-ray crystallography. This result can provide new route and method for the introduction of chiral building block and the important synthetic strategy in synthesis of some complex molecules containing spiro-cyclopropane skeleton with multiple chiral centers and the study of their biological activity.

  1. Building block method: a bottom-up modular synthesis methodology for distributed compliant mechanisms

    Directory of Open Access Journals (Sweden)

    G. Krishnan

    2012-03-01

    Full Text Available Synthesizing topologies of compliant mechanisms are based on rigid-link kinematic designs or completely automated optimization techniques. These designs yield mechanisms that match the kinematic specifications as a whole, but seldom yield user insight on how each constituent member contributes towards the overall mechanism performance. This paper reviews recent developments in building block based design of compliant mechanisms. A key aspect of such a methodology is formulating a representation of compliance at a (i single unique point of interest in terms of geometric quantities such as ellipses and vectors, and (ii relative compliance between distinct input(s and output(s in terms of load flow. This geometric representation provides a direct mapping between the mechanism geometry and their behavior, and is used to characterize simple deformable members that form a library of building blocks. The design space spanned by the building block library guides the decomposition of a given problem specification into tractable sub-problems that can be each solved from an entry in the library. The effectiveness of this geometric representation aids user insight in design, and enables discovery of trends and guidelines to obtain practical conceptual designs.

  2. Mussel-inspired nano-building block assemblies for mimicking extracellular matrix microenvironments with multiple functions.

    Science.gov (United States)

    Wang, Zhenming; Jia, Zhanrong; Jiang, Yanan; Li, Pengfei; Han, Lu; Lu, Xiong; Ren, Fuzeng; Wang, Kefeng; Yuan, Huiping

    2017-08-03

    The assembly of nano-building blocks is an effective way to produce artificial extracellular matrix microenvironments with hierarchical micro/nano structures. However, it is hard to assemble different types of nano-building blocks, to form composite coatings with multiple functions, by traditional layer-by-layer (LbL) self-assembly methods. Inspired by the mussel adhesion mechanism, we developed polydopamine (PDA)-decorated bovine serum albumin microspheres (BSA-MS) and nano-hydroxyapatite (nano-HA), and assembled them to form bioactive coatings with micro/nano structures encapsulating bone morphogenetic protein-2 (BMP-2). First, PDA-decorated nano-HA (nano-pHA) was obtained by oxidative polymerization of dopamine on nano-HA. Second, BMP-2-encapsulated BSA microspheres were prepared through desolvation, and then were also decorated by PDA (pBSA-MS). Finally, the nano-pHA and pBSA-MS were assembled using the adhesive properties of PDA. Bone marrow stromal cell cultures and in vivo implantation, showed that the pHA/pBSA (BMP-2) coatings can promote cell adhesion, proliferation, and benefited for osteoinductivity. PDA decoration was also applied to assemble various functional nanoparticles, such as nano-HA, polystyrene, and Fe3O4 nanoparticles. In summary, this study provides a novel strategy for the assembly of biofunctional nano-building blocks, which surpasses traditional LbL self-assembly of polyelectrolytes, and can find broad applications in bioactive agents delivery or multi-functional coatings.

  3. Multi-shape memory polymers achieved by the spatio-assembly of 3D printable thermoplastic building blocks.

    Science.gov (United States)

    Li, Hongze; Gao, Xiang; Luo, Yingwu

    2016-04-01

    Multi-shape memory polymers were prepared by the macroscale spatio-assembly of building blocks in this work. The building blocks were methyl acrylate-co-styrene (MA-co-St) copolymers, which have the St-block-(St-random-MA)-block-St tri-block chain sequence. This design ensures that their transition temperatures can be adjusted over a wide range by varying the composition of the middle block. The two St blocks at the chain ends can generate a crosslink network in the final device to achieve strong bonding force between building blocks and the shape memory capacity. Due to their thermoplastic properties, 3D printing was employed for the spatio-assembly to build devices. This method is capable of introducing many transition phases into one device and preparing complicated shapes via 3D printing. The device can perform a complex action via a series of shape changes. Besides, this method can avoid the difficult programing of a series of temporary shapes. The control of intermediate temporary shapes was realized via programing the shapes and locations of building blocks in the final device.

  4. Synthesis of skeletally diverse alkaloid-like molecules: exploitation of metathesis substrates assembled from triplets of building blocks

    Directory of Open Access Journals (Sweden)

    Sushil K. Maurya

    2013-04-01

    Full Text Available A range of metathesis substrates was assembled from triplets of unsaturated building blocks. The approach involved the iterative attachment of a propagating and a terminating building block to a fluorous-tagged initiating building block. Metathesis cascade chemistry was used to “reprogram” the molecular scaffolds. Remarkably, in one case, a cyclopropanation reaction competed with the expected metathesis cascade process. Finally, it was demonstrated that the metathesis products could be derivatised to yield the final products. At each stage, purification was facilitated by the presence of a fluorous-tagged protecting group.

  5. Synthesis of (-)-Harzialactone A from a Readily Accessible Epoxy Chiral Building Block%Synthesis of (-)-Harzialactone A from a Readily Accessible Epoxy Chiral Building Block

    Institute of Scientific and Technical Information of China (English)

    何蕾; 张少敏; 伍贻康; 李焰

    2011-01-01

    The antipode of (+)-harzialactone A, an antitumor marine metabolite, was synthesized with the two stereogenic centers in the target structure taken from an optically active epoxy cbiral building block.

  6. Advances in metabolic pathway and strain engineering paving the way for sustainable production of chemical building blocks

    DEFF Research Database (Denmark)

    Chen, Yun; Nielsen, Jens

    2013-01-01

    Bio-based production of chemical building blocks from renewable resources is an attractive alternative to petroleum-based platform chemicals. Metabolic pathway and strain engineering is the key element in constructing robust microbial chemical factories within the constraints of cost effective pr...... developments contribute to the development of novel cell factories for the production of the building block chemicals: adipic acid, succinic acid and 3-hydroxypropionic acid....

  7. A Customizable Quantum-Dot Cellular Automata Building Block for the Synthesis of Classical and Reversible Circuits

    Directory of Open Access Journals (Sweden)

    Ahmed Moustafa

    2015-01-01

    Full Text Available Quantum-dot cellular automata (QCA are nanoscale digital logic constructs that use electrons in arrays of quantum dots to carry out binary operations. In this paper, a basic building block for QCA will be proposed. The proposed basic building block can be customized to implement classical gates, such as XOR and XNOR gates, and reversible gates, such as CNOT and Toffoli gates, with less cell count and/or better latency than other proposed designs.

  8. A Customizable Quantum-Dot Cellular Automata Building Block for the Synthesis of Classical and Reversible Circuits.

    Science.gov (United States)

    Moustafa, Ahmed; Younes, Ahmed; Hassan, Yasser F

    2015-01-01

    Quantum-dot cellular automata (QCA) are nanoscale digital logic constructs that use electrons in arrays of quantum dots to carry out binary operations. In this paper, a basic building block for QCA will be proposed. The proposed basic building block can be customized to implement classical gates, such as XOR and XNOR gates, and reversible gates, such as CNOT and Toffoli gates, with less cell count and/or better latency than other proposed designs.

  9. Antibodies to P-selectin glycoprotein ligand-1 block dendritic cell-mediated enterovirus 71 transmission and prevent virus-induced cells death.

    Science.gov (United States)

    Ren, Xiao-Xin; Li, Chuan; Xiong, Si-Dong; Huang, Zhong; Wang, Jian-Hua; Wang, Hai-Bo

    2015-01-01

    P-selectin glycoprotein ligand-1 (PSGL-1) has been proved to serve as the functional receptor for enterovirus 71 (EV71). We found the abundant expression of PSGL-1 on monocyte-derived dendritic cells (MDDCs). However, we have previously demonstrated that MDDCs did not support efficient replication of EV71. Dendritic cells (DCs) have been described to be subverted by various viruses including EV71 for viral dissemination, we thus explore the potential contribution of PSGL-1 on DC-mediated EV71 transmission. We found that the cell-surface-expressing PSGL-1 on MDDCs mediated EV71 binding, and intriguingly, these loaded-viruses on MDDCs could be transferred to encountered target cells; Prior-treatment with PSGL-1 antibodies or interference with PSGL-1 expression diminished MDDC-mediated EV71 transfer and rescued virus-induced cell death. Our data uncover a novel role of PSGL-1 in DC-mediated EV71 spread, and provide an insight into blocking primary EV71 infection.

  10. Utilization of the Building-Block Approach in Structural Mechanics Research

    Science.gov (United States)

    Rouse, Marshall; Jegley, Dawn C.; McGowan, David M.; Bush, Harold G.; Waters, W. Allen

    2005-01-01

    In the last 20 years NASA has worked in collaboration with industry to develop enabling technologies needed to make aircraft safer and more affordable, extend their lifetime, improve their reliability, better understand their behavior, and reduce their weight. To support these efforts, research programs starting with ideas and culminating in full-scale structural testing were conducted at the NASA Langley Research Center. Each program contained development efforts that (a) started with selecting the material system and manufacturing approach; (b) moved on to experimentation and analysis of small samples to characterize the system and quantify behavior in the presence of defects like damage and imperfections; (c) progressed on to examining larger structures to examine buckling behavior, combined loadings, and built-up structures; and (d) finally moved to complicated subcomponents and full-scale components. Each step along the way was supported by detailed analysis, including tool development, to prove that the behavior of these structures was well-understood and predictable. This approach for developing technology became known as the "building-block" approach. In the Advanced Composites Technology Program and the High Speed Research Program the building-block approach was used to develop a true understanding of the response of the structures involved through experimentation and analysis. The philosophy that if the structural response couldn't be accurately predicted, it wasn't really understood, was critical to the progression of these programs. To this end, analytical techniques including closed-form and finite elements were employed and experimentation used to verify assumptions at each step along the way. This paper presents a discussion of the utilization of the building-block approach described previously in structural mechanics research and development programs at NASA Langley Research Center. Specific examples that illustrate the use of this approach are

  11. Metal-Organic Frameworks: Building Block Design Strategies for the Synthesis of MOFs.

    KAUST Repository

    Luebke, Ryan

    2014-09-01

    A significant and ongoing challenge in materials chemistry and furthermore solid state chemistry is to design materials with the desired properties and characteristics. The field of Metal-Organic Frameworks (MOFs) offers several strategies to address this challenge and has proven fruitful at allowing some degree of control over the resultant materials synthesized. Several methodologies for synthesis of MOFs have been developed which rely on use of predetermined building blocks. The work presented herein is focused on the utilization of two of these design principles, namely the use of molecular building blocks (MBBs) and supermolecular building blocks (SBBs) to target MOF materials having desired connectivities (topologies). These design strategies also permit the introduction of specific chemical moieties, allowing for modification of the MOFs properties. This research is predominantly focused on two platforms (rht-MOFs and ftw-MOFs) which topologically speaking are edge transitive binodal nets; ftw being a (4,12)-connected net and rht being a (3,24)-connected net. These highly connected nets (at least one node having connectivity greater than eight) have been purposefully targeted to increase the predictability of structural outcome. A general trend in topology is that there is an inverse relationship between the connectivity of the node(s) and the number of topological outcomes. Therefore the key to this research (and to effective use of the SBB and MBB approaches) is identification of conditions which allow for reliable formation of the targeted MBBs and SBBs. In the case of the research presented herein: a 12-connected Group IV or Rare Earth based hexanuclear MBB and a 24-connected transition metal based SBB were successfully targeted and synthesized. These two synthetic platforms will be presented and used as examples of how these design methods have been (and can be further) utilized to modify existing materials or develop new materials for gas storage and

  12. Synthesis of Orthogonally Protected Muramic Acid Building Blocks for Solid Phase Peptide Synthesis

    Directory of Open Access Journals (Sweden)

    Kristina Vlahoviček-Kahlina

    2015-07-01

    Full Text Available Muramic acid is found in many peptide natural products containing oligo(polysaccharide moieties. Taking into consideration that the Fmoc methodology is routinely used for solid-phase peptide synthesis, preparation of orthogonally protected muramic acid building blocks for total solid-phase synthesis of these natural products is of particular practical importance. Herein a simple and efficient synthesis of benzyl 2-amino-4,6-O-benzylidene-3-O-[(R-1-carboxyethyl]-2-deoxy-N-9-fluorenylmethyloxycarbonyl-α-D-glucopyranoside (6 from N-acetylglucosamine (1 is described. Important improvements over previous synthetic approaches to glucopyranosides 2 (benzyl 2-acetamido-2-deoxy-α-D-glucopyranoside and 3 (benzyl 2-acetamido-4,6-O-benzylidene-2-deoxy-α-D-glucopyranoside, key building blocks in preparation of 6, include synthesis simplification and efficient isolation and purification. Optically pure (S-2-chloropropionic acid 7 was prepared and introduced to the positon 3-O of sugar moiety to give compound 4 (benzyl 2-acetamido-4,6-O-benzylidene-3-O-[(R-1-carboxyethyl]-2-deoxy-α-D-glucopyranoside with the (R-configuration of the lactyl side-chain in excellent overall yield and optical purity. Deacetylation of amino group gave compound 5 (benzyl 2-amino-4,6-O-benzylidene-3-O-[(R-1-carboxyethyl]-2-deoxy-α-D-glucopyranoside suitable for incorporation of the Fmoc protecting group to give protected muramic acid derivative 6, a useful building block in peptide synthesis.

  13. Enzymatic Ligation Creates Discrete Multi-Nanoparticle Building Blocks for Self-Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Claridge, Shelley A.; Mastroianni, Alexander J.; Au, Yeung B.; Liang, Huiyang W.; Micheel, Christine M.; Frechet, Jean M.J.; Alivisatos, A. Paul

    2008-05-27

    Enzymatic ligation of discrete nanoparticle?DNA conjugates creates nanoparticle dimer and trimer structures in which the nanoparticles are linked by single-stranded DNA, rather than double-stranded DNA as in previous experiments. Ligation is verified by agarose gel and small-angle X-ray scattering. This capability is utilized in two ways: first to create a new class of multiparticle building blocks for nanoscale self-assembly; second to develop a system which can amplify a population of discrete nanoparticle assemblies.

  14. Solving Job-Shop Scheduling Problems by Genetic Algorithms Based on Building Block Hypothesis

    Institute of Scientific and Technical Information of China (English)

    CHENG Rong; CHEN You-ping; LI Zhi-gang

    2006-01-01

    In this paper, we propose a new genetic algorithm for job-shop scheduling problems(JSP). The proposed method uses the operation-based representation, based on schema theorem and building block hypothesis, a new crossover is proposed: By selecting short, low order highly fit schemas to genetic operator, the crossover can exchange meaningful ordering information of parents effectively and can search the global optimization. Simulation results on MT benchmark problem coded by C + + show that our genetic operators are very powerful and suitable to job-shop scheduling problems and our method outperforms the previous GA-based approaches.

  15. Molecular building blocks and their architecture in biologically/environmentally compatible soft matter chemical machinery.

    Science.gov (United States)

    Toyota, Taro; Banno, Taisuke; Nitta, Sachiko; Takinoue, Masahiro; Nomoto, Tomonori; Natsume, Yuno; Matsumura, Shuichi; Fujinami, Masanori

    2014-01-01

    This review briefly summarizes recent developments in the construction of biologically/environmentally compatible chemical machinery composed of soft matter. Since environmental and living systems are open systems, chemical machinery must continuously fulfill its functions not only through the influx and generation of molecules but also via the degradation and dissipation of molecules. If the degradation or dissipation of soft matter molecular building blocks and biomaterial molecules/polymers can be achieved, soft matter particles composed of them can be used to realize chemical machinery such as selfpropelled droplets, drug delivery carriers, tissue regeneration scaffolds, protocell models, cell-/tissuemarkers, and molecular computing systems.

  16. On the building blocks of the M31 and Milky Way halos

    Science.gov (United States)

    Monelli, Matteo

    2017-09-01

    We discuss the formation of the halo of M31 and the Milky Way as traced by the population of RR Lyrae stars, in comparison with the population of such stars preent in satellite dwarf galaxies. We find that both halos and the massive dwarf host a population of high amplitude short period RRab stars, absent in low-mass dwarfs. These stars are explained as the metal-rich tail of the RR Lyrae distribution ([Fe/H] ˜ - 1.5), and thus their existence imply fast chemical enrichment in the host system. Their presence in both halos implies that massive building blocks had an important role in their formation.

  17. Metal-oxide based nanoobjects: reactivity, building blocks for polymeric structures and structural variety

    Science.gov (United States)

    Müller, Achim; Roy, Soumyajit

    2002-12-01

    From the unique 'library' of molybdenum-oxide based building blocks/fragments under reducing conditions in aqueous solution a huge variety of nanoobjects, allowing specific reactions at well-defined positions, can be generated. This enables us to perform a new type of nanochemistry. Examples include the well-known molecular big-wheel of the type {Mo176} and big-ball of the type {Mo132} including their derivatives which are considered here. In addition, the by far largest structurally well-characterised cluster having 368 molybdenum atoms with the shape of a lemon is outlined and discussed. The bibliography includes 71 references.

  18. A Concise Synthesis of Glycolipids Based on Aspartic Acid Building Blocks

    Directory of Open Access Journals (Sweden)

    Lorna Abbey

    2012-09-01

    Full Text Available L-Aspartic acid building blocks bearing galactosyl moieties were used to synthesise glycolipid mimetics of variable hydrocarbon chain length. The glycolipids were readily prepared through amide bond formation using the TBTU/HOBt coupling methodology. It was observed that, under these conditions, activation of the α-carboxylic acid of the intermediates led to near complete racemisation of the chiral centre if the reaction was carried out in the presence of a base such as triethylamine. The enantiomerically pure glycolipids were obtained after careful consideration of the synthetic sequence and by performing the coupling reactions in the absence of base.

  19. Microwave assisted regioselective synthesis of novel pyrazoles and pyrazolopyridazines via fluorine containing building blocks

    Science.gov (United States)

    Althagafi, Ismail I.; Shaaban, Mohamed R.

    2017-08-01

    A facile regioselective synthesis of novel pyrazole derivatives containing a fluorophenyl moiety via the 1,3-dipolar cycloaddition of nitrileimines and enamines using conventional as well as microwave irradiation conditions have been achieved. Fluorine-containing building blocks methodology was used in order to access the targeted fluorinated compounds. The structures of the synthesized products were confirmed by 1H NMR, FT-IR, mass spectrometry, and elemental analyses. Furthermore, the synthesized pyrazoles have been used in the synthesis of some new pyrazolo pyidazines containing pendent to fluorophenyl moiety. An unambiguous structural assignment of the obtained pyrazole regioisomers was determined using the 1H NMR analysis as a valuable tool.

  20. Control over Catenation in Metal−Organic Frameworks via Rational Design of the Organic Building Block

    Energy Technology Data Exchange (ETDEWEB)

    Farha, Omar K.; Malliakas, Christos D.; Kanatzidis, Mercouri G.; Hupp, Joseph T. (NWU)

    2010-02-19

    Metal-organic frameworks (MOFs), a hybrid class of materials comprising inorganic nodes and organic struts, have potential application in many areas due to their high surface areas and uniform pores and channels. One of the key challenges to be overcome in MOF synthesis is the strong propensity for catenation (growth of multiple independent networks within a given crystal), as catenation reduces cavity sizes and diminishes porosity. Here we demonstrate that rational design of organic building blocks, which act as strut-impervious scaffolds, can be exploited to generate highly desired noncatenated materials in a controlled fashion.

  1. New tricyanoiron(Ⅲ) building blocks for the construction of molecule-based magnets

    Institute of Scientific and Technical Information of China (English)

    LAU; Pui-Ha; WONG; Wing-Tak; LAU; Tai-Chu

    2010-01-01

    A series of tricyanoiron(Ⅲ) complexes with the general formula mer-[FeⅢ(5-Xsap)(CN)3]2-(X = H, Me, MeO, Cl or Br, sapH2 = N-salicylidene-o-aminophenol) have been synthesized. These complexes were characterized by IR, ESI-MS, UV/Vis, elemental analysis and magnetic measurements. The structures of (PPh4)2[FeⅢ(sap)(CN)3] and (PPh4)2[FeⅢ(5-Mesap)(CN)3] have been determined by X-ray crystallography. These low-spin d5 tricyanoiron(Ⅲ) complexes are potential building blocks for the construction of molecule-based magnets.

  2. Conversion of the Iridoid Glucoside Antirrhinoside into 3-Azabicyclo[3.3.0]-octane Building Blocks

    DEFF Research Database (Denmark)

    Franzyk, Henrik; Frederiksen, Signe Maria; Jensen, Søren Rosendal

    2000-01-01

    The iridoid glucoside antirrhinoside (1) was transformed into polysubstituted 3-azabicyclo[3.3.0]octanes 3, 12 and 13 in 4-5 steps. Ozonolysis of the diacetonide of 1 and of its 7-deoxy-derivative 8 afforded cyclopentanoids 2 and 10, respectively. Conditions for the selective conversion of 2 and 10...... into the corresponding ditosylates 4 and 11 were investigated. Cyclization of 4 and 11 was achieved with benzylamine and 2-methoxybenzylamine to yield bicyclic pyrrolidines 3, 12 and 13. Additional building blocks 14 and 15 were obtained by selective deprotection of the N-benzyl and isopropylidene moieties in 12 and 13...

  3. Double CAN communicating building block based on embedded system μC/OS-Ⅱ

    Institute of Scientific and Technical Information of China (English)

    Mo,Chuanmeng; Feng,Xiaoyu

    2004-01-01

    On the basis of transplanting successfully a suit of RTOS μC/OS-Ⅱ to MB90F543 MCU, double CAN communicating program module have been embedded into μC/OS-Ⅱ as a building block. Double CAN redundant communication have been realized among several hardware nodes based on μC/OS-Ⅱ. The design mechanism, hardware and software of double CAN communication were described in detail. The paper analyze the differences of CAN communication based on μC/OS-Ⅱ and traditional foreground/background system.Key Word:RTOS; μC/OS-Ⅱ;CAN bus;MB90F543 MCU;redundancy

  4. InGaN micro-LED-pillar as the building block for high brightness emitters

    KAUST Repository

    Shen, Chao

    2013-01-01

    In summary, we confirmed the improved electrical and optical characteristics, with reduced efficiency droop in InGaN μLED-pillars when these devices were scaled down in size. We demonstrated that strain relief contributed to further improvement in EQE characteristics in small InGaN μLED-pillars (D < 50 μm), apart from the current spreading effect. The μLED-pillar can be deployed as the building block for large effective-area, high brightness emitter. © 2013 IEEE.

  5. Building blocks for social accountability: a conceptual framework to guide medical schools.

    Science.gov (United States)

    Preston, Robyn; Larkins, Sarah; Taylor, Judy; Judd, Jenni

    2016-08-26

    This paper presents a conceptual framework developed from empirical evidence, to guide medical schools aspiring towards greater social accountability. Using a multiple case study approach, seventy-five staff, students, health sector representatives and community members, associated with four medical schools, participated in semi-structured interviews. Two schools were in Australia and two were in the Philippines. These schools were selected because they were aspiring to be socially accountable. Data was collected through on-site visits, field notes and a documentary review. Abductive analysis involved both deductive and inductive iterative theming of the data both within and across cases. The conceptual framework for socially accountable medical education was built from analyzing the internal and external factors influencing the selected medical schools. These factors became the building blocks that might be necessary to assist movement to social accountability. The strongest factor was the demands of the local workforce situation leading to innovative educational programs established with or without government support. The values and professional experiences of leaders, staff and health sector representatives, influenced whether the organizational culture of a school was conducive to social accountability. The wider institutional environment and policies of their universities affected this culture and the resourcing of programs. Membership of a coalition of socially accountable medical schools created a community of learning and legitimized local practice. Communities may not have recognized their own importance but they were fundamental for socially accountable practices. The bedrock of social accountability, that is, the foundation for all building blocks, is shared values and aspirations congruent with social accountability. These values and aspirations are both a philosophical understanding for innovation and a practical application at the health systems and

  6. Blocking junctional adhesion molecule C enhances dendritic cell migration and boosts the immune responses against Leishmania major.

    Science.gov (United States)

    Ballet, Romain; Emre, Yalin; Jemelin, Stéphane; Charmoy, Mélanie; Tacchini-Cottier, Fabienne; Imhof, Beat A

    2014-12-01

    The recruitment of dendritic cells to sites of infections and their migration to lymph nodes is fundamental for antigen processing and presentation to T cells. In the present study, we showed that antibody blockade of junctional adhesion molecule C (JAM-C) on endothelial cells removed JAM-C away from junctions and increased vascular permeability after L. major infection. This has multiple consequences on the output of the immune response. In resistant C57BL/6 and susceptible BALB/c mice, we found higher numbers of innate immune cells migrating from blood to the site of infection. The subsequent migration of dendritic cells (DCs) from the skin to the draining lymph node was also improved, thereby boosting the induction of the adaptive immune response. In C57BL/6 mice, JAM-C blockade after L. major injection led to an enhanced IFN-γ dominated T helper 1 (Th1) response with reduced skin lesions and parasite burden. Conversely, anti JAM-C treatment increased the IL-4-driven T helper 2 (Th2) response in BALB/c mice with disease exacerbation. Overall, our results show that JAM-C blockade can finely-tune the innate cell migration and accelerate the consequent immune response to L. major without changing the type of the T helper cell response.

  7. Blocking junctional adhesion molecule C enhances dendritic cell migration and boosts the immune responses against Leishmania major.

    Directory of Open Access Journals (Sweden)

    Romain Ballet

    2014-12-01

    Full Text Available The recruitment of dendritic cells to sites of infections and their migration to lymph nodes is fundamental for antigen processing and presentation to T cells. In the present study, we showed that antibody blockade of junctional adhesion molecule C (JAM-C on endothelial cells removed JAM-C away from junctions and increased vascular permeability after L. major infection. This has multiple consequences on the output of the immune response. In resistant C57BL/6 and susceptible BALB/c mice, we found higher numbers of innate immune cells migrating from blood to the site of infection. The subsequent migration of dendritic cells (DCs from the skin to the draining lymph node was also improved, thereby boosting the induction of the adaptive immune response. In C57BL/6 mice, JAM-C blockade after L. major injection led to an enhanced IFN-γ dominated T helper 1 (Th1 response with reduced skin lesions and parasite burden. Conversely, anti JAM-C treatment increased the IL-4-driven T helper 2 (Th2 response in BALB/c mice with disease exacerbation. Overall, our results show that JAM-C blockade can finely-tune the innate cell migration and accelerate the consequent immune response to L. major without changing the type of the T helper cell response.

  8. Optimum Compressive Strength of Hardened Sandcrete Building Blocks with Steel Chips

    Directory of Open Access Journals (Sweden)

    Alohan Omoregie

    2013-02-01

    Full Text Available The recycling of steel chips into an environmentally friendly, responsive, and profitable commodity in the manufacturing and construction industries is a huge and difficult challenge. Several strategies designed for the management and processing of this waste in developed countries have been largely unsuccessful in developing countries mainly due to its capital-intensive nature. To this end, this investigation attempts to provide an alternative solution to the recycling of this material by maximizing its utility value in the building construction industry. This is to establish their influence on the compressive strength of sandcrete hollow blocks and solid cubes with the aim of specifying the range percent of steel chips for the sandcrete optimum compressive strength value. This is particularly important for developing countries in sub-Saharan Africa, and even Latin America where most sandcrete blocks exhibit compressive strengths far below standard requirements. Percentages of steel chips relative to the weight of cement were varied and blended with the sand in an attempt to improve the sand grading parameters. The steel chips variations were one, two, three, four, five, ten and fifteen percent respectively. It was confirmed that the grading parameters were improved and there were significant increases in the compressive strength of the blocks and cube samples. The greatest improvement was noticed at four percent steel chips and sand combination. Using the plotted profile, the margin of steel chips additions for the optimum compressive strength was also established. It is recommended that steel chip sandcrete blocks are suitable for both internal load bearing, and non-load bearing walls, in areas where they are not subjected to moisture ingress. However, for external walls, and in areas where they are liable to moisture attack after laying, the surfaces should be well rendered. Below ground level, the surfaces should be coated with a water

  9. Catalytic allylic oxidation of internal alkenes to a multifunctional chiral building block

    Science.gov (United States)

    Bayeh, Liela; Le, Phong Q.; Tambar, Uttam K.

    2017-07-01

    The stereoselective oxidation of hydrocarbons is one of the most notable advances in synthetic chemistry over the past fifty years. Inspired by nature, enantioselective dihydroxylations, epoxidations and other oxidations of unsaturated hydrocarbons have been developed. More recently, the catalytic enantioselective allylic carbon-hydrogen oxidation of alkenes has streamlined the production of pharmaceuticals, natural products, fine chemicals and other functional materials. Allylic functionalization provides a direct path to chiral building blocks with a newly formed stereocentre from petrochemical feedstocks while preserving the olefin functionality as a handle for further chemical elaboration. Various metal-based catalysts have been discovered for the enantioselective allylic carbon-hydrogen oxidation of simple alkenes with cyclic or terminal double bonds. However, a general and selective allylic oxidation using the more common internal alkenes remains elusive. Here we report the enantioselective, regioselective and E/Z-selective allylic oxidation of unactivated internal alkenes via a catalytic hetero-ene reaction with a chalcogen-based oxidant. Our method enables non-symmetric internal alkenes to be selectively converted into allylic functionalized products with high stereoselectivity and regioselectivity. Stereospecific transformations of the resulting multifunctional chiral building blocks highlight the potential for rapidly converting internal alkenes into a broad range of enantioenriched structures that can be used in the synthesis of complex target molecules.

  10. Equivalence of the EMD- and NEMD-based decomposition of thermal conductivity into microscopic building blocks

    Science.gov (United States)

    Matsubara, Hiroki; Kikugawa, Gota; Ishikiriyama, Mamoru; Yamashita, Seiji; Ohara, Taku

    2017-09-01

    Thermal conductivity of a material can be comprehended as being composed of microscopic building blocks relevant to the energy transfer due to a specific microscopic process or structure. The building block is called the partial thermal conductivity (PTC). The concept of PTC is essential to evaluate the contributions of various molecular mechanisms to heat conduction and has been providing detailed knowledge of the contribution. The PTC can be evaluated by equilibrium molecular dynamics (EMD) and non-equilibrium molecular dynamics (NEMD) in different manners: the EMD evaluation utilizes the autocorrelation of spontaneous heat fluxes in an equilibrium state whereas the NEMD one is based on stationary heat fluxes in a non-equilibrium state. However, it has not been fully discussed whether the two methods give the same PTC or not. In the present study, we formulate a Green-Kubo relation, which is necessary for EMD to calculate the PTCs equivalent to those by NEMD. Unlike the existing theories, our formulation is based on the local equilibrium hypothesis to describe a clear connection between EMD and NEMD simulations. The equivalence of the two derivations of PTCs is confirmed by the numerical results for liquid methane and butane. The present establishment of the EMD-NEMD correspondence makes the MD analysis of PTCs a robust way to clarify the microscopic origins of thermal conductivity.

  11. Self-assembling SAS-6 multimer is a core centriole building block.

    Science.gov (United States)

    Gopalakrishnan, Jayachandran; Guichard, Paul; Smith, Andrew H; Schwarz, Heinz; Agard, David A; Marco, Sergio; Avidor-Reiss, Tomer

    2010-03-19

    Centrioles are conserved microtubule-based organelles with 9-fold symmetry that are essential for cilia and mitotic spindle formation. A conserved structure at the onset of centriole assembly is a "cartwheel" with 9-fold radial symmetry and a central tubule in its core. It remains unclear how the cartwheel is formed. The conserved centriole protein, SAS-6, is a cartwheel component that functions early in centriole formation. Here, combining biochemistry and electron microscopy, we characterize SAS-6 and show that it self-assembles into stable tetramers, which serve as building blocks for the central tubule. These results suggest that SAS-6 self-assembly may be an initial step in the formation of the cartwheel that provides the 9-fold symmetry. Electron microscopy of centrosomes identified 25-nm central tubules with repeating subunits and show that SAS-6 concentrates at the core of the cartwheel. Recombinant and native SAS-6 self-oligomerizes into tetramers with approximately 6-nm subunits, and these tetramers are components of the centrosome, suggesting that tetramers are the building blocks of the central tubule. This is further supported by the observation that elevated levels of SAS-6 in Drosophila cells resulted in higher order structures resembling central tubule morphology. Finally, in the presence of embryonic extract, SAS-6 tetramers assembled into high density complexes, providing a starting point for the eventual in vitro reconstruction of centrioles.

  12. Passive Vibration Isolation by Compliant Mechanism Using Topology Optimization with Building Blocks

    Directory of Open Access Journals (Sweden)

    V. Vijayan

    2014-10-01

    Full Text Available Compliant Mechanism has been designed for various types of application to transmit desired force and motion. In this study, we have explored an application of Compliant Mechanism for passive vibration isolation systems, for which compliant isolator is used to cancel undesired disturbance, which results in attenuated output amplitude. The Compliant Mechanism is equipped with isolator, which acts as a transmission of force, in order to control the amount of displacement transmitted from it. Compliant Mechanism also used as passive vibration isolator. Here, introducing compliance into the connection, the transmission of applied forces is reduced at some frequencies, at the expense of increasing transmission at other frequencies. The force transmissibility is numerically identical to the motion transmissibility. In order to find the flexible building blocks for force transmissibility, structural optimization approach is applied. The Structural optimization approach focuses on the determination of the topology, shape and size of the mechanism. Thus approach is used to establish the actuator model of the block and it is validated by commercial Finite Element software. A library of compliant elements is proposed in FlexIn. These blocks are in limited number and the basis is composed of 36 elements. The force transmitted to the rigid foundation through the isolator is reduced to avoid transmission of vibration to other machines. Thus the preliminary results of FEA from ANSYS demonstrate that the compliant mechanism can be effectively used to reduce the amount of force transmitted to the surface.

  13. Design of branched and chiral solvatochromic probes: toward quantifying polarity gradients in dendritic macromolecules.

    Science.gov (United States)

    Milosevic, Petar; Hecht, Stefan

    2005-10-27

    [reaction: see text] A pair of chiral, branched monomer building blocks, consisting of a solvatochromic probe and a spectroscopically inactive volume dummy, has been developed. The probe can selectively be excited, and its fluorescence characteristics provide information about local polarity. Incorporation of these monomers into high-generation polyester dendrimers should enable a detailed investigation of the polarity/density profile in dendritic architectures and ultimately allow for the realization of energy gradients from one chromophore building block only.

  14. Culture's building blocks: investigating cultural evolution in a LEGO construction task.

    Science.gov (United States)

    McGraw, John J; Wallot, Sebastian; Mitkidis, Panagiotis; Roepstorff, Andreas

    2014-01-01

    ONE OF THE MOST ESSENTIAL BUT THEORETICALLY VEXING ISSUES REGARDING THE NOTION OF CULTURE IS THAT OF CULTURAL EVOLUTION AND TRANSMISSION: how a group's accumulated solutions to invariant challenges develop and persevere over time. But at the moment, the notion of applying evolutionary theory to culture remains little more than a suggestive trope. Whereas the modern synthesis of evolutionary theory has provided an encompassing scientific framework for the selection and transmission of biological adaptations, a convincing theory of cultural evolution has yet to emerge. One of the greatest challenges for theorists is identifying the appropriate time scales and units of analysis in order to reduce the intractably large and complex phenomenon of "culture" into its component "building blocks." In this paper, we present a model for scientifically investigating cultural processes by analyzing the ways people develop conventions in a series of LEGO construction tasks. The data revealed a surprising pattern in the selection of building bricks as well as features of car design across consecutive building sessions. Our findings support a novel methodology for studying the development and transmission of culture through the microcosm of interactive LEGO design and assembly.

  15. Culture’s building blocks: investigating cultural evolution in a LEGO construction task

    Directory of Open Access Journals (Sweden)

    John Joseph Mcgraw

    2014-09-01

    Full Text Available One of the most essential but theoretically vexing issues regarding the notion of culture is that of cultural evolution and transmission: how a group’s accumulated solutions to invariant challenges develop and persevere over time. But at the moment, the notion of applying evolutionary theory to culture remains little more than a suggestive trope. Whereas the modern synthesis of evolutionary theory has provided an encompassing scientific framework for the selection and transmission of biological adaptations, a convincing theory of cultural evolution has yet to emerge. One of the greatest challenges for theorists is identifying the appropriate time scales and units of analysis in order to reduce the intractably large and complex phenomenon of culture into its component building blocks. In this paper, we present a model for scientifically investigating cultural processes by analyzing the ways people develop conventions in a series of LEGO construction tasks. The data revealed a surprising pattern in the selection of building bricks as well as features of car design across consecutive building sessions. Our findings support a novel methodology for studying the development and transmission of culture through the microcosm of interactive LEGO design and assembly.

  16. Cosmic queuing: galaxy satellites, building blocks and the hierarchical clustering paradigm

    CERN Document Server

    Lagos, Claudia del P; Cora, Sofia A

    2009-01-01

    We study the properties of building blocks (BBs, i.e. accreted satellites) and surviving satellites of present-day galaxies using the SAG semi-analytic model of galaxy formation in the context of a concordance Lambda Cold Dark Matter (LCDM) cosmology. We find higher metallicities for BBs, an effect produced by the same processes behind the build-up of the mass-metallicity relation, namely, the higher peak height in the density fluctuation field occupied by BBs and central galaxies which have collapsed into a single object earlier than surviving satellites. A detailed analysis shows that BBs start to form stars earlier, and build-up half of their final stellar mass (measured at the moment of disruption) up to four times faster than surviving satellites. We show that this effect is a consequence of the epoch in which this occurs; BBs assemble their stellar mass mostly during the peak of the merger activity in the LCDM cosmology, whereas surviving satellites keep increasing their stellar masses down to z=1. The ...

  17. Culture’s building blocks: investigating cultural evolution in a LEGO construction task

    Science.gov (United States)

    McGraw, John J.; Wallot, Sebastian; Mitkidis, Panagiotis; Roepstorff, Andreas

    2014-01-01

    One of the most essential but theoretically vexing issues regarding the notion of culture is that of cultural evolution and transmission: how a group’s accumulated solutions to invariant challenges develop and persevere over time. But at the moment, the notion of applying evolutionary theory to culture remains little more than a suggestive trope. Whereas the modern synthesis of evolutionary theory has provided an encompassing scientific framework for the selection and transmission of biological adaptations, a convincing theory of cultural evolution has yet to emerge. One of the greatest challenges for theorists is identifying the appropriate time scales and units of analysis in order to reduce the intractably large and complex phenomenon of “culture” into its component “building blocks.” In this paper, we present a model for scientifically investigating cultural processes by analyzing the ways people develop conventions in a series of LEGO construction tasks. The data revealed a surprising pattern in the selection of building bricks as well as features of car design across consecutive building sessions. Our findings support a novel methodology for studying the development and transmission of culture through the microcosm of interactive LEGO design and assembly. PMID:25309482

  18. RNA and RNP as Building Blocks for Nanotechnology and Synthetic Biology.

    Science.gov (United States)

    Ohno, Hirohisa; Saito, Hirohide

    2016-01-01

    Recent technologies that aimed to elucidate cellular function have revealed essential roles for RNA molecules in living systems. Our knowledge concerning functional and structural information of naturally occurring RNA and RNA-protein (RNP) complexes is increasing rapidly. RNA and RNP interaction motifs are structural units that function as building blocks to constitute variety of complex structures. RNA-central synthetic biology and nanotechnology are constructive approaches that employ the accumulated information and build synthetic RNA (RNP)-based circuits and nanostructures. Here, we describe how to design and construct synthetic RNA (RNP)-based devices and structures at the nanometer-scale for biological and future therapeutic applications. RNA/RNP nanostructures can also be utilized as the molecular scaffold to control the localization or interactions of target molecule(s). Moreover, RNA motifs recognized by RNA-binding proteins can be applied to make protein-responsive translational "switches" that can turn gene expression "on" or "off" depending on the intracellular environment. This "synthetic RNA and RNP world" will expand tools for nanotechnology and synthetic biology. In addition, these reconstructive approaches would lead to a greater understanding of building principle in naturally occurring RNA/RNP molecules and systems. Copyright © 2016 Elsevier Inc. All rights reserved.

  19. Remote Stabilization of Copper Paddlewheel Based Molecular Building Blocks in Metal-Organic Frameworks

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Wen-Yang; Cai, Rong; Pham, Tony; Forrest, Katherine A.; Hogan, Adam; Nugent, Patrick; Williams, Kia; Wojtas, Lukasz; Luebke, Ryan; Weseli; #324; ski, Lukasz J.; Zaworotko, Michael J.; Space, Brian; Chen, Yu-Sheng; Eddaoudi, Mohamed; Shi, Xiaodong; Ma, Shengqian (KAUST); (UC); (USF); (WVU)

    2015-08-21

    Copper paddlewheel based molecular building blocks (MBBs) are ubiquitous and have been widely employed for the construction of highly porous metal–organic frameworks (MOFs). However, most copper paddlewheel based MOFs fail to retain their structural integrity in the presence of water. This instability is directly correlated to the plausible displacement of coordinating carboxylates in the copper paddlewheel MBB, [Cu₂(O₂C-)₄], by the strongly coordinating water molecules. In this comprehensive study, we illustrate the chemical stability control in the rht-MOF platform via strengthening the coordinating bonds within the triangular inorganic MBB, [Cu₃O(N4–x(CH)xC-)₃] (x = 0, 1, or 2). Remotely, the chemical stabilization propagated into the paddlewheel MBB to afford isoreticular rht-MOFs with remarkably enhanced water/chemical stabilities compared to the prototypal rht-MOF-1.

  20. Alfven Wave Collisions, The Fundamental Building Block of Plasma Turbulence IV: Laboratory Experiment

    CERN Document Server

    Drake, D J; Howes, G G; Kletzing, C A; Skiff, F; Carter, T A; Auerbach, D W

    2013-01-01

    Turbulence is a phenomenon found throughout space and astrophysical plasmas. It plays an important role in solar coronal heating, acceleration of the solar wind, and heating of the interstellar medium. Turbulence in these regimes is dominated by Alfven waves. Most turbulence theories have been established using ideal plasma models, such as incompressible MHD. However, there has been no experimental evidence to support the use of such models for weakly to moderately collisional plasmas which are relevant to various space and astrophysical plasma environments. We present the first experiment to measure the nonlinear interaction between two counterpropagating Alfven waves, which is the building block for astrophysical turbulence theories. We present here four distinct tests that demonstrate conclusively that we have indeed measured the daughter Alfven wave generated nonlinearly by a collision between counterpropagating Alfven waves.

  1. On the building blocks of the M31 and Milky Way halos

    Directory of Open Access Journals (Sweden)

    Monelli Matteo

    2017-01-01

    Full Text Available We discuss the formation of the halo of M31 and the Milky Way as traced by the population of RR Lyrae stars, in comparison with the population of such stars preent in satellite dwarf galaxies. We find that both halos and the massive dwarf host a population of high amplitude short period RRab stars, absent in low-mass dwarfs. These stars are explained as the metal-rich tail of the RR Lyrae distribution ([Fe/H] ∼ - 1.5, and thus their existence imply fast chemical enrichment in the host system. Their presence in both halos implies that massive building blocks had an important role in their formation.

  2. Methylidynetrisphosphonates: Promising C1 building block for the design of phosphate mimetics

    Directory of Open Access Journals (Sweden)

    Vadim D. Romanenko

    2013-05-01

    Full Text Available Methylidynetrisphosphonates are representatives of geminal polyphosphonates bearing three phosphonate (PO3H2 groups at the bridged carbon atom. Like well-known methylenebisphosphonates (BPs, they are characterized by a P–C–P backbone structure and are chemically stable mimetics of the endogenous metabolites, i.e., inorganic pyrophosphates (PPi. Because of its analogy to PPi and an ability to chelate metal ions, the 1,1,1-trisphosphonate structure is of great potential as a C1 building block for the design of phosphate mimetics. The purpose of this review is to present a concise summary of the state of the art in trisphosphonate chemistry with particular emphasis on the synthesis, structure, reactions, and potential medicinal applications of these compounds.

  3. Spectroscopic investigation of some building blocks of organic conductors: A comparative study

    Science.gov (United States)

    Mukherjee, V.; Yadav, T.

    2017-04-01

    Theoretical molecular structures and IR and Raman spectra of di and tetra methyl substituted tetrathiafulvalene and tetraselenafulvalene molecules have been studied. These molecules belong to the organic conductor family and are immensely used as building blocks of several organic conducting devices. The Hartree-Fock and density functional theory with exchange functional B3LYP have been employed for computational purpose. We have also performed normal coordinate analysis to scale the theoretical frequencies and to calculate potential energy distributions for the conspicuous assignments. The exciting frequency and temperature dependent Raman spectra have also presented. Optimization results reveal that the sulphur derivatives possess boat shape while selenium derivatives possess planner structures. Natural bond orbitals analysis has also been performed to study second order interaction between donors and acceptors and to compute molecular orbital occupancy and energy.

  4. Dual-Functional Hydrazide-Reactive and Anhydride-Containing Oligomeric Hydrogel Building Blocks.

    Science.gov (United States)

    Kascholke, Christian; Loth, Tina; Kohn-Polster, Caroline; Möller, Stephanie; Bellstedt, Peter; Schulz-Siegmund, Michaela; Schnabelrauch, Matthias; Hacker, Michael C

    2017-02-08

    Biomimetic hydrogels are advanced biomaterials that have been developed following different synthetic routes. Covalent postfabrication functionalization is a promising strategy to achieve efficient matrix modification decoupled of general material properties. To this end, dual-functional macromers were synthesized by free radical polymerization of maleic anhydride with diacetone acrylamide (N-(1,1-dimethyl-3-oxobutyl)acrylamide) and pentaerythritol diacrylate monostearate. Amphiphilic oligomers (Mn 40%). Efficient hydrazide/hydrazine immobilization depending on solution pH, hydrogel ketone content as well as ligand concentration for bioconjugation was shown and reversibility of hydrazone formation was indicated by physiologically relevant hydrazide release over 7 days. Proof-of-concept experiments with hydrazido-functionalized hyaluronan demonstrated potential for covalent aECM immobilization. The presented dual-functional macromers have perspective as reactive hydrogel building blocks for various biomedical applications.

  5. Biorefineries for the production of top building block chemicals and their derivatives

    DEFF Research Database (Denmark)

    Choi, Sol; Song, Chan Woo; Shin, Jae Ho

    2015-01-01

    Due to the growing concerns on the climate change and sustainability on petrochemical resources, DOE selected and announced the bio-based top 12 building blocks and discussed the needs for developing biorefinery technologies to replace the current petroleum based industry in 2004. Over the last 1...... using micro-organisms will be covered in detail with case studies on succinic acid and 3-hydroxypropionic acid as examples....... years after its announcement, many studies have been performed for the development of efficient technologies for the bio-based production of these chemicals and derivatives. Now, ten chemicals among these top 12 chemicals, excluding the l-aspartic acid and 3-hydroxybutyrolactone, have already been...

  6. Remote stabilization of copper paddlewheel based molecular building blocks in metal-organic frameworks

    KAUST Repository

    Gao, Wenyang

    2015-03-24

    Copper paddlewheel based molecular building blocks (MBBs) are ubiquitous and have been widely employed for the construction of highly porous metal-organic frameworks (MOFs). However, most copper paddlewheel based MOFs fail to retain their structural integrity in the presence of water. This instability is directly correlated to the plausible displacement of coordinating carboxylates in the copper paddlewheel MBB, [Cu2(O2C-)4], by the strongly coordinating water molecules. In this comprehensive study, we illustrate the chemical stability control in the rht-MOF platform via strengthening the coordinating bonds within the triangular inorganic MBB, [Cu3O(N4-x(CH)xC-)3] (x = 0, 1, or 2). Remotely, the chemical stabilization propagated into the paddlewheel MBB to afford isoreticular rht-MOFs with remarkably enhanced water/chemical stabilities compared to the prototypal rht-MOF-1. © 2015 American Chemical Society.

  7. Aldo-X Bifunctional Building Blocks for the Synthesis of Heterocycles.

    Science.gov (United States)

    Ravichandiran, Palanisamy; Lai, Bingbing; Gu, Yanlong

    2017-02-01

    Compounds containing oxygen, nitrogen, or sulfur atoms inside the rings are attracting much attention and interest due to their biological importance. In recent years, several methods for the synthesis of such molecules have been reported by using aldo-X bifunctional building blocks (AXB3 s) as substrates; these are a wide class of organic molecules that contain at least two reactive sites, among them, one aldehyde, acetal, or semiacetal group was involved. Because of the multiple reactivities, AXB3 s are widely used in the one-pot synthesis of biologically important heterocycles. This review summarizes the synthesis of important heterocycles by using AXB3 s as pivotal components in establishing multicomponent reactions, tandem reactions, and so forth. In many cases, the established reaction systems with AXB3 s were characterized by some green properties, such as easy access to the substrate, mild and environmentally benign conditions, and wide scope of the substrate.

  8. Crystal engineering on superpolyhedral building blocks in metal-organic frameworks applied in gas adsorption.

    Science.gov (United States)

    Chen, Ying Pin; Liu, Tian Fu; Fordham, Stephen; Zhou, Hong Cai

    2015-12-01

    Two metal-organic frameworks [PCN-426(Ni) and PCN-427(Cu)] have been designed and synthesized to investigate the structure predictability using a SBB (supermolecular building blocks) approach. Tetratopic ligands featuring 120° angular carboxylate moieties were coordinated with a [Ni3(μ3-O)] cluster and a [Cu2O2] unit, respectively. As topologically predicted, 4-connected networks with square coordination adopted the nbo net for the Ni-MOF and ssb net for the Cu-MOF. PCN-426(Ni) was augmented with 12-connected octahedral SBBs, while PCN-427(Cu) was constructed with tetragonal open channels. After a CO2 supercritical drying procedure, the PCN-426(Ni) possessed a Brunauer-Emmett-Teller (BET) surface area as high as 3935 m(2) g(-1) and impressively high N2 uptake of 1500 cm(3) g(-1). This work demonstrates the generalization of the SBB strategy, finding an alternative to inconvenient synthetic processes to achieve the desired structural features.

  9. LEP : four building blocks of matter ... times three Conference MT17

    CERN Multimedia

    2001-01-01

    The four building blocks of everyday matter form a family composed of the up-quark, the down-quark, the electron and the electron-neutrino. Similar particles, heavier but otherwise identical, are known to exist - grouped together in two further families. By measuring the number of neutrino types that exist, LEP has shown that there are no more fam-ilies of particles. Nature has chosen the number three. This is an intriguing result, and the reason why there are neither more nor fewer than three particle families is one of the greatest mysteries of modern physics. One important consequence is that we exist. Had there been any fewer than three families of matter particles, the phenomenon known as CP violation - which led to matter dominating anti-matter in the early Universe - would not have occurred. All the matter and antimatter created in the Big Bang would have annihilated.

  10. Density Functional Theory Study on La Complex with Schiff-base as Building Block

    Institute of Scientific and Technical Information of China (English)

    XIA Shu-Wei; XU Xiang; SUN Ya-Li; FAN Yu-Hua; BI Cai-Feng; ZHANG Dong-Mei; YANG Li-Rong

    2006-01-01

    Quantum density functional theory (DFT) results are reported for the building block [LaL1(NO3)]- of La complex [LaL1(NO3)]NO3·5H2O (L1 = (CH3)2CHCH2CH(NCHC4H3O)COO-). The structure was optimized and the calculation results show that the lanthanum ion is coordinated by one nitrogen atom and three oxygen atoms of L1 and two oxygen atoms of nitrate ion. The bond length of La-N is 0.2637 nm and the average length of La-O is 0.2526 nm, which are consistent with the literatures. In addition, the stabilities, electronic structural characteristics and IR spectra of the complex have been analyzed, which describe the coordination of lanthanum ion with other atoms in detail.

  11. 2-Alkynylbenzaldoxime: a versatile building block for the generation of N-heterocycles.

    Science.gov (United States)

    He, Linman; Nie, Hongming; Qiu, Guanyinsheng; Gao, Yueqiu; Wu, Jie

    2014-12-07

    2-Alkynylbenzaldoxime as a versatile building block has been applied widely for the construction of N-heterocycles in organic synthesis. Since it could be easily transferred to isoquinoline N-oxide via intramolecular 6-endo cyclization in the presence of metal catalysts or electrophiles, the subsequent [3 + 2] cycloaddition/nucleophilic addition and rearrangement could be expected. On the other hand, a Beckmann rearrangement could occur first since an oxime moiety is present in the molecule, which would then undergo an intramolecular cyclization to furnish nitrogen-containing heterocycles. This review reports the recent advancement in the generation of N-heterocycles starting from 2-alkynylbenzaldoximes via tandem reactions based on different reaction types.

  12. Extended structure design with simple molybdenum oxide building blocks and urea as a directing agent.

    Science.gov (United States)

    Veen, Sandra J; Roy, Soumyajit; Filinchuk, Yaroslav; Chernyshov, Dmitry; Petukhov, Andrei V; Versluijs-Helder, Marjan; Broersma, Alfred; Soulimani, Fouad; Visser, Tom; Kegel, Willem K

    2008-08-04

    We report here a simple one-pot directed synthesis of an oxomolybdate urea composite in which elementary molybdenum oxide building blocks are linked together with the aid of urea. This type of directed material design resulted in large rod-like crystals of an inorganic-organic hybrid extended structure of {MoO 3(NH 2-CO-NH 2)} infinity consisting of right- and left-handed helical units. In the crystal structure urea acts both as a glue that links the inorganic molybdenum units into a helix and as a supramolecular linker for the stabilization of the crystal structure as a whole. This type of molecular topology resulted in an unexpectedly high thermal stability.

  13. Structural insight into RNA recognition motifs: versatile molecular Lego building blocks for biological systems.

    Science.gov (United States)

    Muto, Yutaka; Yokoyama, Shigeyuki

    2012-01-01

    'RNA recognition motifs (RRMs)' are common domain-folds composed of 80-90 amino-acid residues in eukaryotes, and have been identified in many cellular proteins. At first they were known as RNA binding domains. Through discoveries over the past 20 years, however, the RRMs have been shown to exhibit versatile molecular recognition activities and to behave as molecular Lego building blocks to construct biological systems. Novel RNA/protein recognition modes by RRMs are being identified, and more information about the molecular recognition by RRMs is becoming available. These RNA/protein recognition modes are strongly correlated with their biological significance. In this review, we would like to survey the recent progress on these versatile molecular recognition modules.

  14. Biophysics and Thermodynamics: The Scientific Building Blocks of Bio-inspired Drug Delivery Nano Systems.

    Science.gov (United States)

    Demetzos, Costas

    2015-06-01

    Biophysics and thermodynamics are considered as the scientific milestones for investigating the properties of materials. The relationship between the changes of temperature with the biophysical variables of biomaterials is important in the process of the development of drug delivery systems. Biophysics is a challenge sector of physics and should be used complementary with the biochemistry in order to discover new and promising technological platforms (i.e., drug delivery systems) and to disclose the 'silence functionality' of bio-inspired biological and artificial membranes. Thermal analysis and biophysical approaches in pharmaceuticals present reliable and versatile tools for their characterization and for the successful development of pharmaceutical products. The metastable phases of self-assembled nanostructures such as liposomes should be taken into consideration because they represent the thermal events can affect the functionality of advanced drug delivery nano systems. In conclusion, biophysics and thermodynamics are characterized as the building blocks for design and development of bio-inspired drug delivery systems.

  15. The assembly of supramolecular boxes and coordination polymers based on bis-zinc-salphen building blocks.

    Science.gov (United States)

    Kuil, Mark; Puijk, Iris M; Kleij, Arjan W; Tooke, Duncan M; Spek, Anthony L; Reek, Joost N H

    2009-01-05

    We report the assembly of supramolecular boxes and coordination polymers based on a rigid bis-zinc(II)-salphen complex and various ditopic nitrogen ligands. The use of the bis-zinc(II)-salphen building block in combination with small ditopic nitrogen ligands gave organic coordination polymers both in solution as well as in the solid state. Molecular modeling shows that supramolecular boxes with small internal cavities can be formed. However, the inability to accommodate solvent molecules (such as toluene) in these cavities explains why coordination polymers are prevailing over well-defined boxes, as it would lead to an energetically unfavorable vacuum. In contrast, for relatively longer ditopic nitrogen ligands, we observed the selective formation of supramolecular box assemblies in all cases studied. The approach can be easily extended to chiral analogues by using chiral ditopic nitrogen ligands.

  16. Digital NMR profiles as building blocks: assembling ¹H fingerprints of steviol glycosides.

    Science.gov (United States)

    Napolitano, José G; Simmler, Charlotte; McAlpine, James B; Lankin, David C; Chen, Shao-Nong; Pauli, Guido F

    2015-04-24

    This report describes a fragment-based approach to the examination of congeneric organic compounds by NMR spectroscopy. The method combines the classic interpretation of 1D- and 2D-NMR data sets with contemporary computer-assisted NMR analysis. Characteristic NMR profiles of key structural motifs were generated by (1)H iterative full spin analysis and then joined together as building blocks to recreate the (1)H NMR spectra of increasingly complex molecules. To illustrate the methodology described, a comprehensive analysis of steviol (1), seven steviol glycosides (2-8) and two structurally related isosteviol compounds (9, 10) was carried out. The study also assessed the potential impact of this method on relevant aspects of natural product research including structural verification, chemical dereplication, and mixture analysis.

  17. Digital NMR Profiles as Building Blocks: Assembling 1H Fingerprints of Steviol Glycosides

    Science.gov (United States)

    Napolitano, José G.; Simmler, Charlotte; McAlpine, James B.; Lankin, David C.; Chen, Shao-Nong; Pauli, Guido F.

    2015-01-01

    This report describes a fragment-based approach to the examination of congeneric organic compounds by NMR spectroscopy. The method combines the classic interpretation of 1D- and 2D-NMR data sets with contemporary computer-assisted NMR analysis. Characteristic NMR profiles of key structural motifs were generated by 1H iterative full spin analysis and then joined together as building blocks to recreate the 1H NMR spectra of increasingly complex molecules. To illustrate the methodology described, a comprehensive analysis of steviol (1), seven steviol glycosides (2–8) and two structurally related isosteviol compounds (9, 10) was carried out. The study also assessed the potential impact of this method on relevant aspects of natural product research including structural verification, chemical dereplication, and mixture analysis. PMID:25714117

  18. Lurgi MegaMethanol technology. Delivering the building blocks for the future fuel and monomer demand

    Energy Technology Data Exchange (ETDEWEB)

    Wurzel, T. [Lurgi AG, Frankfurt/Main (Germany)

    2006-07-01

    The paper describes the central role of methanol within a changing environment with respect to feedstock availability as well as steadily growing demand in fuel and monomer demand. The current large-scale production facilities are described with respect to the technological challenges in order to ensure the availability of sufficient methanol for down-stream applications. Different down-stream applications are described which clearly confirm that methanol is the dominant C1-building block due to its chemical flexibility. It is concluded that by means of the implementation of two MTP (Methanol to Propylene) projects in China initiated the era of ''down-stream methanol'' has begun in the industry. (orig.)

  19. Multifunctional hybrids by combining ordered mesoporous materials and macromolecular building blocks.

    Science.gov (United States)

    Soler-Illia, Galo J A A; Azzaroni, Omar

    2011-02-01

    This critical review presents and discusses the recent advances in complex hybrid materials that result from the combination of polymers and mesoporous matrices. Ordered mesoporous materials derived from supramolecular templating present high surface area and tailored pore sizes; pore surfaces can be further modified by organic, organometallic or even biologically active functional groups. This permits the creation of hybrid systems with distinct physical properties or chemical functions located in the framework walls, the pore surface, and the pore interior. Bringing polymeric building blocks into the game opens a new dimension: the possibility to create phase separated regions (functional domains) within the pores that can behave as "reactive pockets" of nanoscale size, with highly controlled chemistry and interactions within restricted volumes. The possibilities of combining "hard" and "soft" building blocks to yield these novel nanocomposite materials with tuneable functional domains ordered in space are potentially infinite. New properties are bound to arise from the synergy of both kinds of components, and their spatial location. The main object of this review is to report on new approaches towards functional polymer-inorganic mesostructured hybrids, as well as to discuss the present challenges in this flourishing research field. Indeed, the powerful concepts resulting from the synergy of sol-gel processing, supramolecular templating and polymer chemistry open new opportunities in the design of advanced functional materials: the tailored production of complex matter displaying spatially-addressed chemistry based on the control of chemical topology. Breakthrough applications are expected in the fields of sustainable energy, environment sensing and remediation, biomaterials, pharmaceutical industry and catalysis, among others (221 references).

  20. Combinatorial chemistry in nematodes: modular assembly of primary metabolism-derived building blocks.

    Science.gov (United States)

    von Reuss, Stephan H; Schroeder, Frank C

    2015-07-01

    The nematode Caenorhabditis elegans was the first animal to have its genome fully sequenced and has become an important model organism for biomedical research. However, like many other animal model systems, its metabolome remained largely uncharacterized, until recent investigations demonstrated the importance of small molecule-based signalling cascades for virtually every aspect of nematode biology. These studies have revealed that nematodes are amazingly skilled chemists: using simple building blocks from conserved primary metabolism and a strategy of modular assembly, C. elegans and other nematode species create complex molecular architectures to regulate their development and behaviour. These nematode-derived modular metabolites (NDMMs) are based on the dideoxysugars ascarylose or paratose, which serve as scaffolds for attachment of moieties from lipid, amino acid, carbohydrate, citrate, and nucleoside metabolism. Mutant screens and comparative metabolomics based on NMR spectroscopy and MS have so-far revealed several 100 different ascarylose ("ascarosides") and a few paratose ("paratosides") derivatives, many of which represent potent signalling molecules that can be active at femtomolar levels, regulating development, behaviour, body shape, and many other life history traits. NDMM biosynthesis appears to be carefully regulated as assembly of different modules proceeds with very high specificity. Preliminary biosynthetic studies have confirmed the primary metabolism origin of some NDMM building blocks, whereas the mechanisms that underlie their highly specific assembly are not understood. Considering their functions and biosynthetic origin, NDMMs represent a new class of natural products that cannot easily be classified as "primary" or "secondary". We believe that the identification of new variants of primary metabolism-derived structures that serve important signalling functions in C. elegans and other nematodes provides a strong incentive for a comprehensive

  1. Utilization of some non coded amino acids as isosters of peptide building blocks.

    Science.gov (United States)

    Hlaváček, J; Marcová, R; Ježek, R; Slaninová, J

    1996-09-01

    In our study on non coded amino acids and their utilization in peptide chemistry we synthesized methylene-thio (CH2-S) and methyleneoxy (CH2-O) group containing amino acids and pseudodipeptides which could be used as building blocks for the construction of peptide hormone analogues. The (CH2-S) isoster of peptide bond exhibits increased flexibility, lipophility and resistance to proteolytic enzymes. This group exhibits similar properties as the isosteric disulfide bond in the side chain of cystine residue. The (CH2-O) isoster is moreover similar in its geometry to extended conformation of peptide bond. As a consequence, the changed profile of biological activities could be expected for peptide hormone analogues containing such isosteric moiety. The (CH2-S) isosters of the peptide bond were prepared by alkylation of thiolates of 2-mercaptocarboxylic acids, the disulfide bond by alkylation of cysteine or homocysteine. The (CH2-O) isosters were prepared by (AcO)4Rh2 catalyzed addition of carbenes of alkyl diazocarboxylates to N-protected aminoalcohols. Pseudodipeptides H-Leu-ψ(CH2-S)-Gly-NH2 and H-Leu-ψ(CH2-O)-Gly-NH2 were introduced into the C-terminal part of the oxytocin molecule using solution methods of peptide chemistry. Both inserted isosteric bonds were resistant against proteolytic degradation, the first one was found to decrease an enzymic cleavage of the distant Tyr(2)-Ile(3) bond in the corresponding analogue, too. The (CH2-S) isosters of the disulfide bond containing an orthogonal protection of theirα-amino (Fmoc) andα-(OAll, OH) orω-(OBu(+), OH) carboxylic groups were applied in the solid phase synthesis of the aminoterminal 1-deamino-15-pentadecapeptide of endothelin-I which represents a strong vasoactive agent. The solid phase synthesis was carried out by the step-wise protocol on the Rink or Merrifield type resin using orthogonally protected carba cystine building blocks.

  2. Combinatorial chemistry in nematodes: modular assembly of primary metabolism-derived building blocks

    Science.gov (United States)

    2016-01-01

    The nematode Caenorhabditis elegans was the first animal to have its genome fully sequenced and has become an important model organism for biomedical research. However, like many other animal model systems, its metabolome remained largely uncharacterized, until recent investigations demonstrated the importance of small molecule-based signalling cascades for virtually every aspect of nematode biology. These studies have revealed that nematodes are amazingly skilled chemists: using simple building blocks from conserved primary metabolism and a strategy of modular assembly, C. elegans and other nematode species create complex molecular architectures to regulate their development and behaviour. These nematode-derived modular metabolites (NDMMs) are based on the dideoxysugars ascarylose or paratose, which serve as scaffolds for attachment of moieties from lipid, amino acid, carbohydrate, citrate, and nucleoside metabolism. Mutant screens and comparative metabolomics based on NMR spectroscopy and MS have so-far revealed several 100 different ascarylose (“ascarosides”) and a few paratose (“paratosides”) derivatives, many of which represent potent signalling molecules that can be active at femtomolar levels, regulating development, behaviour, body shape, and many other life history traits. NDMM biosynthesis appears to be carefully regulated as assembly of different modules proceeds with very high specificity. Preliminary biosynthetic studies have confirmed the primary metabolism origin of some NDMM building blocks, whereas the mechanisms that underlie their highly specific assembly are not understood. Considering their functions and biosynthetic origin, NDMMs represent a new class of natural products that cannot easily be classified as “primary” or “secondary”. We believe that the identification of new variants of primary metabolism-derived structures that serve important signalling functions in C. elegans and other nematodes provides a strong incentive for

  3. The virion host shut-off (vhs protein blocks a TLR-independent pathway of herpes simplex virus type 1 recognition in human and mouse dendritic cells.

    Directory of Open Access Journals (Sweden)

    Christopher R Cotter

    Full Text Available Molecular pathways underlying the activation of dendritic cells (DCs in response to Herpes Simplex Virus type 1 (HSV-1 are poorly understood. Removal of the HSV virion host shut-off (vhs protein relieves a block to DC activation observed during wild-type infection. In this study, we utilized a potent DC stimulatory HSV-1 recombinant virus lacking vhs as a tool to investigate the mechanisms involved in the activation of DCs by HSV-1. We report that the release of pro-inflammatory cytokines by conventional DC (cDC during HSV-1 infection is triggered by both virus replication-dependent and replication-independent pathways. Interestingly, while vhs is capable of inhibiting the release of cytokines during infection of human and mouse cDCs, the secretion of cytokines by plasmacytoid DC (pDC is not affected by vhs. These data prompted us to postulate that infection of cDCs by HSV triggers a TLR independent pathway for cDC activation that is susceptible to blockage by the vhs protein. Using cDCs isolated from mice deficient in both the TLR adaptor protein MyD88 and TLR3, we show that HSV-1 and the vhs-deleted virus can activate cDCs independently of TLR signaling. In addition, virion-associated vhs fails to block cDC activation in response to treatment with TLR agonists, but it efficiently blocked cDC activation triggered by the paramyxoviruses Sendai Virus (SeV and Newcastle Disease Virus (NDV. This block to SeV- and NDV-induced activation of cDC resulted in elevated SeV and NDV viral gene expression indicating that infection with HSV-1 enhances the cell's susceptibility to other pathogens through the action of vhs. Our results demonstrate for the first time that a viral protein contained in the tegument of HSV-1 can block the induction of DC activation by TLR-independent pathways of viral recognition.

  4. Integrating Si nanoscale building blocks into micro-sized materials to enable practical applications in lithium-ion batteries.

    Science.gov (United States)

    Yi, Ran; Gordin, Mikhail L; Wang, Donghai

    2016-01-28

    This article highlights recent advances in micro-sized silicon anode materials composed of silicon nanoscale building blocks for lithium-ion batteries. These materials show great potential in practical applications since they combine good cycling stability, high rate performance, and high volumetric capacity. Different preparation methods are introduced and the features and performance of the resulting materials are discussed. Key take-away points are interspersed through the discussion, including comments on the roles of the nanoscale building blocks. Finally, we discuss current challenges and provide an outlook for future development of micro-sized silicon-based anode materials.

  5. Shortcut access to peptidosteroid conjugates: building blocks for solid-phase bile acid scaffold decoration by convergent ligation.

    Science.gov (United States)

    Verzele, Dieter; Figaroli, Sara; Madder, Annemieke

    2011-12-07

    We present three versatile solid-supported scaffold building blocks based on the (deoxy)cholic acid framework and decorated with handles for further derivatization by modern ligation techniques such as click chemistry, Staudinger ligation or native chemical ligation. Straightforward procedures are presented for the synthesis and analysis of the steroid constructs. These building blocks offer a new, facile and shorter access route to bile acid-peptide conjugates on solid-phase with emphasis on heterodipodal conjugates with defined spatial arrangements. As such, we provide versatile new synthons to the toolbox for bile acid decoration.

  6. Shortcut Access to Peptidosteroid Conjugates: Building Blocks for Solid-Phase Bile Acid Scaffold Decoration by Convergent Ligation

    Directory of Open Access Journals (Sweden)

    Sara Figaroli

    2011-12-01

    Full Text Available We present three versatile solid-supported scaffold building blocks based on the (deoxycholic acid framework and decorated with handles for further derivatization by modern ligation techniques such as click chemistry, Staudinger ligation or native chemical ligation. Straightforward procedures are presented for the synthesis and analysis of the steroid constructs. These building blocks offer a new, facile and shorter access route to bile acid-peptide conjugates on solid-phase with emphasis on heterodipodal conjugates with defined spatial arrangements. As such, we provide versatile new synthons to the toolbox for bile acid decoration.

  7. Advances in metabolic pathway and strain engineering paving the way for sustainable production of chemical building blocks.

    Science.gov (United States)

    Chen, Yun; Nielsen, Jens

    2013-12-01

    Bio-based production of chemical building blocks from renewable resources is an attractive alternative to petroleum-based platform chemicals. Metabolic pathway and strain engineering is the key element in constructing robust microbial chemical factories within the constraints of cost effective production. Here we discuss how the development of computational algorithms, novel modules and methods, omics-based techniques combined with modeling refinement are enabling reduction in development time and thus advance the field of industrial biotechnology. We further discuss how recent technological developments contribute to the development of novel cell factories for the production of the building block chemicals: adipic acid, succinic acid and 3-hydroxypropionic acid.

  8. Building Quality Report Cards for Geriatric Care in The Netherlands: Using Concept Mapping to Identify the Appropriate "Building Blocks" from the Consumer's Perspective

    Science.gov (United States)

    Groenewoud, A. Stef; van Exel, N. Job A.; Berg, Marc; Huijsman, Robbert

    2008-01-01

    Purpose: This article reports on a study to identify "building blocks" for quality report cards for geriatric care. Its aim is to present (a) the results of the study and (b) the innovative step-by-step approach that was developed to arrive at these results. Design and Methods: We used Concept Mapping/Structured Conceptualization to…

  9. SiC Multi-Chip Power Modules as Power-System Building Blocks

    Science.gov (United States)

    Lostetter, Alexander; Franks, Steven

    2007-01-01

    The term "SiC MCPMs" (wherein "MCPM" signifies "multi-chip power module") denotes electronic power-supply modules containing multiple silicon carbide power devices and silicon-on-insulator (SOI) control integrated-circuit chips. SiC MCPMs are being developed as building blocks of advanced expandable, reconfigurable, fault-tolerant power-supply systems. Exploiting the ability of SiC semiconductor devices to operate at temperatures, breakdown voltages, and current densities significantly greater than those of conventional Si devices, the designs of SiC MCPMs and of systems comprising multiple SiC MCPMs are expected to afford a greater degree of miniaturization through stacking of modules with reduced requirements for heat sinking. Moreover, the higher-temperature capabilities of SiC MCPMs could enable operation in environments hotter than Si-based power systems can withstand. The stacked SiC MCPMs in a given system can be electrically connected in series, parallel, or a series/parallel combination to increase the overall power-handling capability of the system. In addition to power connections, the modules have communication connections. The SOI controllers in the modules communicate with each other as nodes of a decentralized control network, in which no single controller exerts overall command of the system. Control functions effected via the network include synchronization of switching of power devices and rapid reconfiguration of power connections to enable the power system to continue to supply power to a load in the event of failure of one of the modules. In addition to serving as building blocks of reliable power-supply systems, SiC MCPMs could be augmented with external control circuitry to make them perform additional power-handling functions as needed for specific applications: typical functions could include regulating voltages, storing energy, and driving motors. Because identical SiC MCPM building blocks could be utilized in a variety of ways, the cost

  10. "Science SQL" as a Building Block for Flexible, Standards-based Data Infrastructures

    Science.gov (United States)

    Baumann, Peter

    2016-04-01

    We have learnt to live with the pain of separating data and metadata into non-interoperable silos. For metadata, we enjoy the flexibility of databases, be they relational, graph, or some other NoSQL. Contrasting this, users still "drown in files" as an unstructured, low-level archiving paradigm. It is time to bridge this chasm which once was technologically induced, but today can be overcome. One building block towards a common re-integrated information space is to support massive multi-dimensional spatio-temporal arrays. These "datacubes" appear as sensor, image, simulation, and statistics data in all science and engineering domains, and beyond. For example, 2-D satellilte imagery, 2-D x/y/t image timeseries and x/y/z geophysical voxel data, and 4-D x/y/z/t climate data contribute to today's data deluge in the Earth sciences. Virtual observatories in the Space sciences routinely generate Petabytes of such data. Life sciences deal with microarray data, confocal microscopy, human brain data, which all fall into the same category. The ISO SQL/MDA (Multi-Dimensional Arrays) candidate standard is extending SQL with modelling and query support for n-D arrays ("datacubes") in a flexible, domain-neutral way. This heralds a new generation of services with new quality parameters, such as flexibility, ease of access, embedding into well-known user tools, and scalability mechanisms that remain completely transparent to users. Technology like the EU rasdaman ("raster data manager") Array Database system can support all of the above examples simultaneously, with one technology. This is practically proven: As of today, rasdaman is in operational use on hundreds of Terabytes of satellite image timeseries datacubes, with transparent query distribution across more than 1,000 nodes. Therefore, Array Databases offering SQL/MDA constitute a natural common building block for next-generation data infrastructures. Being initiator and editor of the standard we present principles

  11. A Concise Strategy for Polymer-supported Regio-oriented Introduction of Various Building Blocks onto Glucopyranoside Scaffold

    Institute of Scientific and Technical Information of China (English)

    廖云; 李正名; 黄乃正

    2001-01-01

    A new strategy was devised to stereo-specifically introduce various building blocks, mainly heterocycles such as pyrimidines and triazines onto a multi-hydroxy molecule. A glucopyranoside was chosen as a target scaffold. Two polymerbased protective reagents were jointly integrated in the implementation of the strategy. It was found that in the α-D-giu-copyranoside, which has four free hydroxyl groups within the same molecule, its 4, 6-di-OH could be simultaneously protected by polystyryl boronic acid, which left the 2, 3-di-OH free for substitution. Due to the steric effects within the molecule, the 2-OH is much more liabile to electrophilic stubstitution. Thus the first and the second building blocks could be introduced regioselectively onto the 2-OH and the 3-OHpositions. After a facile deprotection, the4,6-di-OH were left free and by apiication of a second protecting reagentpolystyryltritylchloride onto 6-OH, a third building block was introduced onto the 4-OH position. After further deprotection, the fourth building block was later introduced onto the 6-OH position. The new strategy was successfully applied in the combinatorial synthesis by application of the split-mix technique. The respective eleven small libraries were obtained and confirmed by HPLC-MS and NMR. Some preliminary results on chemical structure/herbicidal activity relationship were discussed.

  12. Bottom-up nanoarchitecture of semiconductor nano-building blocks by controllable in situ SEM-FIB thermal soldering method

    KAUST Repository

    Zhang, Xuan

    2017-08-10

    Here we demonstrate that the building blocks of semiconductor WO3 nanowires can be controllably soldered together by a novel nano-soldering technique of in situ SEM-FIB thermal soldering, in which the soldering temperature can precisely remain in an optimal range to avoid a strong thermal diffusion.

  13. The Building Blocks of Digital Media Literacy: Socio-Material Participation and the Production of Media Knowledge

    Science.gov (United States)

    Dezuanni, Michael

    2015-01-01

    This article outlines the knowledge and skills students develop when they engage in digital media production and analysis in school settings. The metaphor of "digital building blocks" is used to describe the material practices, conceptual understandings and production of knowledge that lead to the development of digital media literacy.…

  14. The asc trinodal platform: Two-step assembly of triangular, tetrahedral, and trigonal-prismatic molecular building blocks

    KAUST Repository

    Schoedel, Alexander

    2013-02-10

    The self-assembly of triangular, tetrahedral, and trigonal-prismatic molecular building blocks affords the first example of a trinodal family of metal-organic materials. Four examples of isoreticular expanded and functionalized frameworks are detailed. Gas adsorption experiments validated the permanent porosity of the parent structure. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Playing with structures at the nanoscale: designing catalysts by manipulation of clusters and nanocrystals as building blocks.

    Science.gov (United States)

    Cargnello, Matteo; Fornasiero, Paolo; Gorte, Raymond J

    2013-12-02

    The purpose of this Concept is to highlight some of the most recent and promising methods for the preparation of tailored catalysts by designing and preparing the component building blocks and by assembling them in a controlled fashion. We want to emphasize how rational design and synthesis of catalysts must be coupled to precise catalytic and structural characterization of the systems in an ideal feedback loop. New catalyst design and preparation techniques, dictated by information about the active sites that the specific application requires, are frequently available. The building blocks for developing these novel catalysts include colloidal methods for the preparation of uniform nanostructures, physical methods for rational assembly of the building blocks (Langmuir-Blodgett, liquid-air self-assembly), and development of rational interactions between the building blocks for enhanced activity of the assemblies. These methods, which apply techniques normally used in other fields of nanotechnology to catalysis, offer exciting opportunities to help improve currently available catalytic systems in terms of activity, stability and selectivity.

  16. Network diversity through two-step crystal engineering of a decorated 6-connected primary molecular building block

    KAUST Repository

    Yang, Qing-Yuan

    2016-10-04

    [Cr3O(nicotinate)6]+ was isolated and then utilised as a new primary molecular building block, PMBB, linked by 2-, 3- and 4-connected metal centres. Five novel metal–organic materials (MOMs) with acs, stp, rtl, fsc and pcu topologies were thereby isolated and characterised.

  17. The Building Blocks of Digital Media Literacy: Socio-Material Participation and the Production of Media Knowledge

    Science.gov (United States)

    Dezuanni, Michael

    2015-01-01

    This article outlines the knowledge and skills students develop when they engage in digital media production and analysis in school settings. The metaphor of "digital building blocks" is used to describe the material practices, conceptual understandings and production of knowledge that lead to the development of digital media literacy.…

  18. Search for water and life's building blocks in the universe: A summary

    Science.gov (United States)

    Ehrenfreund, Pascale; Kwok, Sun; Bergin, Edwin

    2015-08-01

    Water and organic compounds are essential ingredients for life on Earth and possibly elsewhere. In gaseous form water acts as a coolant that allows interstellar gas clouds to collapse to form stars, whereas water ice covers small dust particles that agglomerate to form planetesimals and planets. The variety of organic compounds identified in interstellar and circumstellar regions reflects complex reaction schemes in the gaseous and icy/solid state. Interstellar volatiles and refractory materials were processed and radially mixed within the protostellar disk from which our solar system formed. But the dynamic solar nebula was also a source for new materials and the search for water and life’s building blocks on terrestrial planets, most of the outer-solar-system satellites as well as small solar system bodies reveals exciting new findings. The analysis of small bodies and their fragments, meteorites and interplanetary dust particles, sheds lights onto the extraterrestrial delivery process of prebiotic molecules to young planets and the pathways to life’s origin on Earth and possibly elsewhere. We summarize the results of invited and contributed papers of this Focus Meeting which will allow us to better assess the habitability of objects in our solar system and provide constraints for exoplanets.

  19. Building blocks for automated elucidation of metabolites: Machine learning methods for NMR prediction

    Science.gov (United States)

    Kuhn, Stefan; Egert, Björn; Neumann, Steffen; Steinbeck, Christoph

    2008-01-01

    Background Current efforts in Metabolomics, such as the Human Metabolome Project, collect structures of biological metabolites as well as data for their characterisation, such as spectra for identification of substances and measurements of their concentration. Still, only a fraction of existing metabolites and their spectral fingerprints are known. Computer-Assisted Structure Elucidation (CASE) of biological metabolites will be an important tool to leverage this lack of knowledge. Indispensable for CASE are modules to predict spectra for hypothetical structures. This paper evaluates different statistical and machine learning methods to perform predictions of proton NMR spectra based on data from our open database NMRShiftDB. Results A mean absolute error of 0.18 ppm was achieved for the prediction of proton NMR shifts ranging from 0 to 11 ppm. Random forest, J48 decision tree and support vector machines achieved similar overall errors. HOSE codes being a notably simple method achieved a comparatively good result of 0.17 ppm mean absolute error. Conclusion NMR prediction methods applied in the course of this work delivered precise predictions which can serve as a building block for Computer-Assisted Structure Elucidation for biological metabolites. PMID:18817546

  20. Building blocks for automated elucidation of metabolites: Machine learning methods for NMR prediction

    Directory of Open Access Journals (Sweden)

    Neumann Steffen

    2008-09-01

    Full Text Available Abstract Background Current efforts in Metabolomics, such as the Human Metabolome Project, collect structures of biological metabolites as well as data for their characterisation, such as spectra for identification of substances and measurements of their concentration. Still, only a fraction of existing metabolites and their spectral fingerprints are known. Computer-Assisted Structure Elucidation (CASE of biological metabolites will be an important tool to leverage this lack of knowledge. Indispensable for CASE are modules to predict spectra for hypothetical structures. This paper evaluates different statistical and machine learning methods to perform predictions of proton NMR spectra based on data from our open database NMRShiftDB. Results A mean absolute error of 0.18 ppm was achieved for the prediction of proton NMR shifts ranging from 0 to 11 ppm. Random forest, J48 decision tree and support vector machines achieved similar overall errors. HOSE codes being a notably simple method achieved a comparatively good result of 0.17 ppm mean absolute error. Conclusion NMR prediction methods applied in the course of this work delivered precise predictions which can serve as a building block for Computer-Assisted Structure Elucidation for biological metabolites.

  1. Identification of candidate molecules for the building blocks of life's earliest polymers

    Science.gov (United States)

    Hud, Nicholas

    2016-07-01

    Chemists have yet to find a plausible prebiotic route to RNA polymers, and most proposed mechanisms for prebiotic peptide synthesis are inefficient. We are exploring the hypothesis that RNA and peptides have both evolved from polymers with different chemical structures. We have found that molecules closely related to amino acids and the nucleobases of RNA, which were likely present on the prebiotic Earth, greatly facilitate the formation of polypeptides and RNA-like structures (Chen et al., 2014; Forsythe et al., 2015). The identification of molecules that may have served as precursors to the building blocks of extant polymers, or as prebiotic catalysts for biopolymer formation, has direct implications regarding which molecules that should be considered as possible signs of chemistries that can support the emergence of life in the universe. Furthermore, the possibility that life started with molecules that can be repeatedly cycled between their monomeric and polymeric states, as is still the case with extant biopolymers, suggests environmental characteristics that would have facilitated the formation and early evolution of functional biopolymers (Walker et al., 2012). M. C. Chen, et al., J. Am. Chem. Soc., 2014, 136, 5640-5646 J. G. Forsythe, et al., Angew. Chem., Int. Ed. Engl., 2015, 54, 9871-9875. M.A. Walker, et al., PLoS ONE, 2012, 7, e34166.

  2. An organometallic building block approach to produce a multidecker 4f single-molecule magnet.

    Science.gov (United States)

    Le Roy, Jennifer J; Jeletic, Matthew; Gorelsky, Serge I; Korobkov, Ilia; Ungur, Liviu; Chibotaru, Liviu F; Murugesu, Muralee

    2013-03-06

    An organometallic building block strategy was employed to investigate the magnetic properties of a Ln(III) organometallic single-ion magnet (SIM) and subsequent single-molecule magnet (SMM) after coupling two of the monomeric units. New homoleptic Dy(III)COT″2 and Ln(III)2COT″3 (Ln = Gd, Dy) complexes have been synthesized. DFT calculations of the bimetallic Dy(III) complex indicate strong metal-ligand covalency and uneven donation to the Dy(III) ions by the terminal and internal COT″(2-) (cyclooctatetraenide) rings that correlate with the respective bond distances. Interestingly, the studies also point to a weak covalent interaction between the metal centers, despite a large separation. The ac susceptibility data indicates that both Dy(III)COT″2 and Dy(III)2COT″3 act as an SIM and an SMM, respectively, with complex multiple relaxation mechanisms. Ab initio calculations reveal the direction of the magnetic anisotropic axis is not perpendicular to the planar COT″ rings for both Dy(III)COT″2 and Dy(III)2COT″3 complexes due to the presence of trimethylsilyl groups on the COT″ rings. If these bulky groups are removed, the calculations predict reorientation of the anisotropic axis can be achieved.

  3. Nanopatterned graphene quantum dots as building blocks for quantum cellular automata

    Science.gov (United States)

    Wang, Z. F.; Liu, Feng

    2011-10-01

    Quantum cellular automata (QCA) is an innovative approach that incorporates quantum entities in classical computation processes. Binary information is encoded in different charge states of the QCA cells and transmitted by the inter-cell Coulomb interaction. Despite the promise of QCA, however, it remains a challenge to identify suitable building blocks for the construction of QCA. Graphene has recently attracted considerable attention owing to its remarkable electronic properties. The planar structure makes it feasible to pattern the whole device architecture in one sheet, compatible with the existing electronics technology. Here, we demonstrate theoretically a new QCA architecture built upon nanopatterned graphene quantum dots (GQDs). Using the tight-binding model, we determine the phenomenological cell parameters and cell-cell response functions of the GQD-QCA to characterize its performance. Furthermore, a GQD-QCA architecture is designed to demonstrate the functionalities of a fundamental majority gate. Our results show great potential in manufacturing high-density ultrafast QCA devices from a single nanopatterned graphene sheet.

  4. Stepwise transformation of the molecular building blocks in a porphyrin-encapsulating metal-organic material

    KAUST Repository

    Zhang, ZhenJie

    2013-04-24

    When immersed in solutions containing Cu(II) cations, the microporous metal-organic material P11 ([Cd4(BPT)4]·[Cd(C 44H36N8)(S)]·[S], BPT = biphenyl-3,4′,5-tricarboxylate) undergoes a transformation of its [Cd 2(COO)6]2- molecular building blocks (MBBs) into novel tetranuclear [Cu4X2(COO)6(S) 2] MBBs to form P11-Cu. The transformation occurs in single-crystal to single-crystal fashion, and its stepwise mechanism was studied by varying the Cd2+/Cu2+ ratio of the solution in which crystals of P11 were immersed. P11-16/1 (Cd in framework retained, Cd in encapsulated porphyrins exchanged) and other intermediate phases were thereby isolated and structurally characterized. P11-16/1 and P11-Cu retain the microporosity of P11, and the relatively larger MBBs in P11-Cu permit a 20% unit cell expansion and afford a higher surface area and a larger pore size. © 2013 American Chemical Society.

  5. The cluster Terzan 5 as a remnant of a primordial building block of the Galactic bulge

    CERN Document Server

    Ferraro, F R; Mucciarelli, A; Beccari, G; Rich, R M; Origlia, L; Lanzoni, B; Rood, R T; Valenti, E; Bellazzini, M; Ransom, S M; Cocozza, G; 10.1038/nature08581

    2009-01-01

    Globular star clusters are compact and massive stellar systems old enough to have witnessed the entire history of our Galaxy, the Milky Way. Although recent results suggest that their formation may have been more complex than previously thought, they still are the best approximation to a stellar population formed over a relatively short time scale (less than 1 Gyr) and with virtually no dispersion in the iron content. Indeed, only one cluster-like system (omega Centauri) in the Galactic halo is known to have multiple stellar populations with a significant spread in iron abundance and age4,5. Similar findings in the Galactic bulge have been hampered by the obscuration arising from thick and varying layers of interstellar dust. Here we report that Terzan 5, a globular-cluster-like system in the Galactic bulge, has two stellar populations with different iron content and ages. Terzan 5 could be the surviving remnant of one of the primordial building blocks that are thought to merge and form galaxy bulges.

  6. Ultrahigh-speed rotating nanoelectromechanical system devices assembled from nanoscale building blocks

    Science.gov (United States)

    Kim, Kwanoh; Xu, Xiaobin; Guo, Jianhe; Fan, D. L.

    2014-04-01

    The development of rotary nanomotors is crucial for advancing nanoelectromechanical system technology. In this work, we report design, assembly and rotation of ordered arrays of nanomotors. The nanomotors are bottom-up assembled from nanoscale building blocks with nanowires as rotors, patterned nanomagnets as bearings and quadrupole microelectrodes as stators. Arrays of nanomotors rotate with controlled angle, speed (over 18,000 r.p.m.), and chirality by electric fields. Using analytical modelling, we reveal the fundamental nanoscale electrical, mechanical and magnetic interactions in the nanomotor system, which excellently agrees with experimental results and provides critical understanding for designing metallic nanoelectromechanical systems. The nanomotors can be continuously rotated for 15 h over 240,000 cycles. They are applied for controlled biochemical release and demonstrate releasing rate of biochemicals on nanoparticles that can be precisely tuned by mechanical rotations. The innovations reported in this research, from concept, design and actuation to application, are relevant to nanoelectromechanical system, nanomedicine, microfluidics and lab-on-a-chip architectures.

  7. Crystal engineering on superpolyhedral building blocks in metal–organic frameworks applied in gas adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Ying-Pin; Liu, Tian-Fu; Fordham, Stephen; Zhou, Hong-Cai

    2015-11-07

    Two metal–organic frameworks [PCN-426(Ni) and PCN-427(Cu)] have been designed and synthesized to investigate the structure predictability using a SBB (supermolecular building blocks) approach. Tetratopic ligands featuring 120° angular carboxylate moieties were coordinated with a [Ni33-O)] cluster and a [Cu2O2] unit, respectively. As topologically predicted, 4-connected networks with square coordination adopted thenbonet for the Ni-MOF andssbnet for the Cu-MOF. PCN-426(Ni) was augmented with 12-connected octahedral SBBs, while PCN-427(Cu) was constructed with tetragonal open channels. After a CO2supercritical drying procedure, the PCN-426(Ni) possessed a Brunauer–Emmett–Teller (BET) surface area as high as 3935 m2 g-1and impressively high N2uptake of 1500 cm3 g-1. This work demonstrates the generalization of the SBB strategy, finding an alternative to inconvenient synthetic processes to achieve the desired structural features.

  8. Assembly of Robust Bacterial Microcompartment Shells Using Building Blocks from an Organelle of Unknown Function

    Energy Technology Data Exchange (ETDEWEB)

    Lassila, JK; Bernstein, SL; Kinney, JN; Axen, SD; Kerfeld, CA

    2014-05-29

    Bacterial microconnpartnnents (BMCs) sequester enzymes from the cytoplasmic environment by encapsulation inside a selectively permeable protein shell. Bioinformatic analyses indicate that many bacteria encode BMC clusters of unknown function and with diverse combinations of shell proteins. The genome of the halophilic myxobacterium Haliangium ochraceum encodes one of the most atypical sets of shell proteins in terms of composition and primary structure. We found that microconnpartnnent shells could be purified in high yield when all seven H. ochraceum BMC shell genes were expressed from a synthetic operon in Escherichia coll. These shells differ substantially from previously isolated shell systems in that they are considerably smaller and more homogeneous, with measured diameters of 39 2 nm. The size and nearly uniform geometry allowed the development of a structural model for the shells composed of 260 hexagonal units and 13 hexagons per icosahedral face. We found that new proteins could be recruited to the shells by fusion to a predicted targeting peptide sequence, setting the stage for the use of these remarkably homogeneous shells for applications such as three-dimensional scaffolding and the construction of synthetic BMCs. Our results demonstrate the value of selecting from the diversity of BMC shell building blocks found in genomic sequence data for the construction of novel compartments. (C) 2014 Elsevier Ltd. All rights reserved.

  9. Structural Influence on Superatomic Orbitals of Typical Gold Nanostructure Building Blocks

    Science.gov (United States)

    Jiang, Wanrun; Gao, Yang; Xu, Dexuan; Liu, Fang; Wang, Zhigang

    2016-10-01

    We compared superatomic orbitals mainly contributed by 6s atomic orbitals among spherical core-shell cluster Au13, hexagonal plane Au7 and a (5,5) nanotube segment Au35 through first-principles density functional theory calculations. The compatibility between geometry and orbital morphology influences both the presence and the energy level order of particular superatomic orbitals. Taking Au13 as a reference, which possesses a regular configuration of 1S 21P 61D 5, the hexagonal Au7 in 1S 21P 41D 1 lacks the 1P occupied superatomic orbital which is distributed out of the structural plane. Different from the nearly degenerated five occupied 1D orbitals in Au13, Au35 in 1S 21P 61D 101F 101G 61H 1 shows energy separations over 4.0 eV between split 1D regions and 1F regions according to the preference of tubular geometry to different orbital morphologies. The structural reliance of the electronic structure revealed by these typical building blocks might be informative for bottom-up design and fabrication of nanoscale devices based on a gold nanostructure and contributes to the variety and operability of nanoscale materials.

  10. Intrinsic Optical Activity and Environmental Perturbations: Solvation Effects in Chiral Building Blocks

    Science.gov (United States)

    Lemler, Paul M.; Vaccaro, Patrick

    2016-06-01

    The non-resonant interaction of electromagnetic radiation with an isotropic ensemble of chiral molecules, which causes the incident state of linear polarization to undergo a signed rotation, long has served as a metric for gauging the enantiomeric purity of asymmetric syntheses. While the underlying phenomenon of circular birefringence (CB) typically is probed in the condensed phase, recent advances in ultrasensitive circular-differential detection schemes, as exemplified by the techniques of Cavity Ring-Down Polarimetry (CRDP), have permitted the first quantitative analyses of such processes to be performed in rarefied media. Efforts to extend vapor-phase investigations of CB to new families of chiral substrates will be discussed, with particular emphasis directed towards the elucidation of intrinsic (e.g., solvent-free) properties and their mediation by environmental perturbations (e.g., solvation). Specific species targeted by this work will include the stereoselective building blocks phenylpropylene oxide and α-methylbenzyl amine, both of which exhibit pronounced solvent-dependent changes in measured optical activity. The nature of chiroptical response in different environments will be highlighted, with quantum-chemical calculations serving to unravel the structural and electronic provenance of observed behavior.

  11. Undecylenic acid: a valuable and physiologically active renewable building block from castor oil.

    Science.gov (United States)

    Van der Steen, Marijke; Stevens, Christian V

    2009-01-01

    A lot of attention is currently being paid to the transition to a biobased economy. In this movement, most efforts concentrate on the development of bioenergy applications including bioethanol, biodiesel, thermochemical conversion of biomass, and others. However, in the energy sector other nonbiomass alternatives are known, whereas no valuable alternatives are available when thinking about chemical building blocks. Therefore, it is also essential to develop new routes for the synthesis of bio-based chemicals and materials derived thereof. Such intermediates can originate either from plants or from animals. Castor oil is a non-edible oil extracted from the seeds of the castor bean plant Ricinus communis (Euphorbiaceae), which grows in tropical and subtropical areas. Globally, around one million tons of castor seeds are produced every year, the leading producing areas being India, PR China, and Brazil.2 10-Undecenoic acid or undecylenic acid is a fatty acid derived from castor oil that, owing to its bifunctional nature, has many possibilities to develop sustainable applications.

  12. Novel layered two-dimensional semiconductors as the building blocks for nano-electronic/photonic systems

    Science.gov (United States)

    Su, Guoxiong; De, Debtanu; Hadjiev, Viktor G.; Peng, Haibing

    2014-06-01

    Layered two-dimensional (2D) semiconductors beyond graphene have been emerging as potential building blocks for the next-generation electronic/photonic applications. Representative metal chalcogenides, including the widely studied MoS2, possess similar layered crystal structures with weak interaction between adjacent layers, thus allowing the formation of stable thin-layer crystals with thickness down to a few or even single atomic layer. Other important chalcogenides, involving earth-abundant and environment-friendly materials desirable for sustainable applications, include SnS2 (band gap: 2.1 eV) and SnS (band gap: 1.1 eV). So far, commonly adopted for research purpose are mechanical and liquid exfoliation methods for creating thin layers of such 2D semiconductors. Most recently, chemical vapor deposition (CVD) was attracting significant attention as a practical method for producing thin films or crystal grains of MoS2. However, critical yet still absent is an effective experimental approach for controlling the positions of thin crystal grains of layered 2D semiconductors during the CVD process. Here we report the controlled CVD synthesis of thin crystal arrays of representative layered semiconductors (including SnS2 and SnS) at designed locations on chip, promising large-scale optoelectronic applications. Our work opens a window for future practical applications of layered 2D semiconductors in integrated nano-electronic/photonic systems.

  13. A LEON2&3 Emulation Board Qualified for Space Programs Based on Reusable Building Blocks

    Science.gov (United States)

    Caleno, Mauro; Quere, Gregory; Chenu, Xavier

    2014-08-01

    ESA/ESTEC has granted Airbus Defense and Space a study for the development of a versatile LEON2 and LEON3 emulation board hosted on a COTS FPGA board.The LEON Emulation Board (LEB) is a component for System Simulators used as Software Validation Facilities and Operational Simulators. It is an alternative to the full software simulation of the LEON processor; additionally, because it embeds the actual VHDL of the LEON processor, it is fully representative and delivers a performance higher than the instruction-set software simulators.The LEB enables simulating in software the functions of Systems on Chip not already embedded in the LEB. It is available in 3 configurations for the LEON2 FT and the LEON3. Moreover, as it is built around a set of reusable simulation building blocks (VHDL + software driver), it can easily be reassembled to emulate more accurately different Systems on Chips (SoC).This paper presents the key functions of the LEB, its performance, applications and potential future developments.

  14. A computerized tutor prototype for prostate cryotherapy: key building blocks and system evaluation

    Science.gov (United States)

    Rabin, Yoed; Shimada, Kenji; Joshi, Purva; Sehrawat, Anjali; Keelan, Robert; Wilfong, Dona M.; McCormick, James T.

    2017-02-01

    This paper focuses on the evaluation of a prototype for a computer-based tutoring system for prostate cryosurgery, while reviewing its key building blocks and their benchmark performance. The tutoring system lists geometrical constraints of cryoprobe placement, displays a rendered shape of the prostate, simulates cryoprobe insertion, enables distance measurements, simulates the corresponding thermal history, and evaluates the mismatch between the target region shape and a pre-selected planning isotherm. The quality of trainee planning is measured in comparison with a computergenerated plan, created for each case study by a previously developed planning algorithm, known as bubble-packing. While the tutoring level in this study aims only at geometrical constraints on cryoprobe placement and the resulting thermal history, it creates a unique opportunity to gain insight into the process outside of the operation room. System validation of the tutor has been performed by collecting training data from surgical residents, having no prior experience or advanced knowledge of cryotherapy. Furthermore, the system has been evaluated by graduate engineering students having no formal education in medicine. In terms of match between a planning isotherm and the target region shape, results demonstrate medical residents' performance improved from 4.4% in a pretest to 37.8% in a posttest over a course of 50 minutes of training (within 10% margins from a computer-optimized plan). Comparing those results with the performance of engineering students indicates similar results, suggesting that planning of the cryoprobe layout essentially revolves around geometric considerations.

  15. Lunar and Planetary Science XXXV: Terrestrial Planets: Building Blocks and Differentiation

    Science.gov (United States)

    2004-01-01

    The session "Terrestrial Planets: Building Blocks and Differentiation: included the following topics:Magnesium Isotopes in the Earth, Moon, Mars, and Pallasite Parent Body: High-Precision Analysis of Olivine by Laser-Ablation Multi-Collector ICPMS; Meteoritic Constraints on Collision Rates in the Primordial Asteroid Belt and Its Origin; New Constraints on the Origin of the Highly Siderophile Elements in the Earth's Upper Mantle; Further Lu-Hf and Sm-Nd Isotopic Data on Planetary Materials and Consequences for Planetary Differentiation; A Deep Lunar Magma Ocean Based on Neodymium, Strontium and Hafnium Isotope Mass Balance Partial Resetting on Hf-W System by Giant Impacts; On the Problem of Metal-Silicate Equilibration During Planet Formation: Significance for Hf-W Chronometry ; Solid Metal-Liquid Metal Partitioning of Pt, Re, and Os: The Effect of Carbon; Siderophile Element Abundances in Fe-S-Ni-O Melts Segregated from Partially Molten Ordinary Chondrite Under Dynamic Conditions; Activity Coefficients of Silicon in Iron-Nickel Alloys: Experimental Determination and Relevance for Planetary Differentiation; Reinvestigation of the Ni and Co Metal-Silicate Partitioning; Metal/Silicate Paritioning of P, Ga, and W at High Pressures and Temperatures: Dependence on Silicate Melt Composition; and Closure of the Fe-S-Si Liquid Miscibility Gap at High Pressure and Its Implications for Planetary Core Formation.

  16. Nucleic acids and smart materials: advanced building blocks for logic systems.

    Science.gov (United States)

    Pu, Fang; Ren, Jinsong; Qu, Xiaogang

    2014-09-03

    Logic gates can convert input signals into a defined output signal, which is the fundamental basis of computing. Inspired by molecular switching from one state to another under an external stimulus, molecular logic gates are explored extensively and recognized as an alternative to traditional silicon-based computing. Among various building blocks of molecular logic gates, nucleic acid attracts special attention owing to its specific recognition abilities and structural features. Functional materials with unique physical and chemical properties offer significant advantages and are used in many fields. The integration of nucleic acids and functional materials is expected to bring about several new phenomena. In this Progress Report, recent progress in the construction of logic gates by combining the properties of a range of smart materials with nucleic acids is introduced. According to the structural characteristics and composition, functional materials are categorized into three classes: polymers, noble-metal nanomaterials, and inorganic nanomaterials. Furthermore, the unsolved problems and future challenges in the construction of logic gates are discussed. It is hoped that broader interests in introducing new smart materials into the field are inspired and tangible applications for these constructs are found. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Linking dwarf galaxies to halo building blocks with the most metal-poor star in Sculptor

    CERN Document Server

    Frebel, Anna; Simon, Joshua D

    2009-01-01

    Current cosmological models indicate that the Milky Way's stellar halo was assembled from many smaller systems. Based on the apparent absence of the most metal-poor stars in present-day dwarf galaxies, recent studies claimed that the true Galactic building blocks must have been vastly different from the surviving dwarfs. The discovery of an extremely iron-poor star (S1020549) in the Sculptor dwarf galaxy based on a medium-resolution spectrum cast some doubt on this conclusion. However, verification of the iron-deficiency and measurements of additional elements, such as the alpha-element Mg, are mandatory for demonstrating that the same type of stars produced the metals found in dwarf galaxies and the Galactic halo. Only then can dwarf galaxy stars be conclusively linked to early stellar halo assembly. Here we report high-resolution spectroscopic abundances for 11 elements in S1020549, confirming the iron abundance of less than 1/4000th that of the Sun, and showing that the overall abundance pattern mirrors th...

  18. Nanocluster building blocks of artificial square spin ice: Stray-field studies of thermal dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Pohlit, Merlin, E-mail: pohlit@physik.uni-frankfurt.de; Porrati, Fabrizio; Huth, Michael; Müller, Jens [Institute of Physics, Goethe-University Frankfurt, Frankfurt/Main (Germany); Ohno, Yuzo; Ohno, Hideo [Laboratory for Nanoelectronics and Spintronics, Research Institute of Electrical Communication, Tohoku University, Sendai (Japan)

    2015-05-07

    We present measurements of the thermal dynamics of a Co-based single building block of an artificial square spin ice fabricated by focused electron-beam-induced deposition. We employ micro-Hall magnetometry, an ultra-sensitive tool to study the stray field emanating from magnetic nanostructures, as a new technique to access the dynamical properties during the magnetization reversal of the spin-ice nanocluster. The obtained hysteresis loop exhibits distinct steps, displaying a reduction of their “coercive field” with increasing temperature. Therefore, thermally unstable states could be repetitively prepared by relatively simple temperature and field protocols allowing one to investigate the statistics of their switching behavior within experimentally accessible timescales. For a selected switching event, we find a strong reduction of the so-prepared states' “survival time” with increasing temperature and magnetic field. Besides the possibility to control the lifetime of selected switching events at will, we find evidence for a more complex behavior caused by the special spin ice arrangement of the macrospins, i.e., that the magnetic reversal statistically follows distinct “paths” most likely driven by thermal perturbation.

  19. BUILDING BLOCKS IN THE FOREIGN LANGUAGE CLASSROOM (PILARES BÁSICOS EN EL AULA DE IDIOMAS

    Directory of Open Access Journals (Sweden)

    Coto Keith Rossina

    2010-12-01

    presents each separately, giving the idea that only one or two can be used in the language classroom, thus missing some important matters. The point of this article is that in order to be more effective, Learning Styles, Multiple Intelligences and Language Learning Strategies must intertwine, so as to create a solid building block. The author first gives an overview of each of these areas. She then explains in the review of the literature how they should be used as a closely-knit unit. Next, she provides an example of this integration through a lesson plan on the topic of environmental conservation for an Oral Communication course for English majors at School of Modern Languages, University of Costa Rica. Finally, some advice is given to instructors on the incorporation of each of these building blocks.

  20. Microbiologically produced carboxylic acids used as building blocks in organic synthesis.

    Science.gov (United States)

    Aurich, Andreas; Specht, Robert; Müller, Roland A; Stottmeister, Ulrich; Yovkova, Venelina; Otto, Christina; Holz, Martina; Barth, Gerold; Heretsch, Philipp; Thomas, Franziska A; Sicker, Dieter; Giannis, Athanassios

    2012-01-01

    Oxo- and hydroxy-carboxylic acids are of special interest in organic synthesis. However, their introduction by chemical reactions tends to be troublesome especially with regard to stereoselectivity. We describe herein the biotechnological preparation of selected oxo- and hydroxycarboxylic acids under "green" conditions and their use as promising new building blocks. Thereby, our biotechnological goal was the development of process fundamentals regarding the variable use of renewable raw materials, the development of a multi purpose bioreactor and application of a pilot plant with standard equipment for organic acid production to minimize the technological effort. Furthermore the development of new product isolation procedures, with the aim of direct product recovery, capture of products or single step operation, was necessary. The application of robust and approved microorganisms, also genetically modified, capable of using a wide range of substrates as well as producing a large spectrum of products, was of special importance. Microbiologically produced acids, like 2-oxo-glutaric acid and 2-oxo-D-gluconic acid, are useful educts for the chemical synthesis of hydrophilic triazines, spiro-connected heterocycles, benzotriazines, and pyranoic amino acids. The chiral intermediate of the tricarboxylic acid cycle, (2R,3S)-isocitric acid, is another promising compound. For the first time our process provides large quantities of enantiopure trimethyl (2R,3S)-isocitrate which was used in subsequent chemical transformations to provide new chiral entities for further usage in total synthesis and pharmaceutical research.Oxo- and hydroxy-carboxylic acids are of special interest in organic synthesis. However, their introduction by chemical reactions tends to be troublesome especially with regard to stereoselectivity. We describe herein the biotechnological preparation of selected oxo- and hydroxycarboxylic acids under "green" conditions and their use as promising new building

  1. Dendritic bundles, minicolumns, columns, and cortical output units

    Directory of Open Access Journals (Sweden)

    Giorgio Innocenti

    2010-03-01

    Full Text Available The search for the fundamental building block of the cerebral cortex has highlighted three structures, perpendicular to the cortical surface: i columns of neurons with radially invariant response properties, e.g., receptive field position, sensory modality, stimulus orientation or direction, frequency tuning etc. ii minicolumns of radially aligned cell bodies and iii bundles, constituted by the apical dendrites of pyramidal neurons with cell bodies in different layers. The latter were described in detail, and sometimes quantitatively, in several species and areas. It was recently suggested that the dendritic bundles consist of apical dendrites belonging to neurons projecting their axons to specific targets. We review the concept above and suggest that another structural and computational unit of cerebral cortex is the cortical output unit (COU, i.e. an assembly of bundles of apical dendrites and their parent cell bodies including each of the outputs to distant cortical or subcortical structures, of a given cortical locus (area or part of an area. This somato-dendritic assembly receives inputs some of which are common to the whole assembly and determine its radially invariant response properties, others are specific to one or more dendritic bundles, and determine the specific response signature of neurons in the different cortical layers and projecting to different targets.

  2. Reversible Redox Activity in Multicomponent Metal-Organic Frameworks Constructed from Trinuclear Copper Pyrazolate Building Blocks.

    Science.gov (United States)

    Tu, Binbin; Pang, Qingqing; Xu, Huoshu; Li, Xiaomin; Wang, Yulin; Ma, Zhen; Weng, Linhong; Li, Qiaowei

    2017-06-14

    Inorganic functionalization of metal-organic frameworks (MOFs), such as incorporation of multiple inorganic building blocks with distinct metals into one structure and further modulation of the metal charges, endows the porous materials with significant properties toward their applications in catalysis. In this work, by an exploration of the role of 4-pyrazolecarboxylic acid (H2PyC) in the formation of trinuclear copper pyrazolate as a metalloligand in situ, four new MOFs with multiple components in order were constructed through one-pot synthesis. This metalloligand strategy provides multicomponent MOFs with new topologies (tub for FDM-4 and tap for FDM-5) and is also compatible with a second organic linker for cooperative construction of complex MOFs (1,4-benzenedicarboxylic acid for FDM-6 and 2,6-naphthalenedicarboxylic acid for FDM-7). The component multiplicity of these MOFs originates from PyC's ability to separate Cu and Zn on the basis of their differentiated binding affinities toward pyrazolate and carboxylate. These MOFs feature reversible and facile redox transformations between Cu(I)3(PyC)3 and Cu(II)3(μ-OH)(PyC)3(OH)3 without altering the connecting geometries of the units, thus further contributing to the significant catalytic activities in the oxidation of CO and aromatic alcohols and the decomposition of H2O2. This study on programming multiple inorganic components into one framework and modulating their electronic structures is an example of functionalizing the inorganic units of MOFs with a high degree of control.

  3. Leveraging "raw materials" as building blocks and bioactive signals in regenerative medicine.

    Science.gov (United States)

    Renth, Amanda N; Detamore, Michael S

    2012-10-01

    Components found within the extracellular matrix (ECM) have emerged as an essential subset of biomaterials for tissue engineering scaffolds. Collagen, glycosaminoglycans, bioceramics, and ECM-based matrices are the main categories of "raw materials" used in a wide variety of tissue engineering strategies. The advantages of raw materials include their inherent ability to create a microenvironment that contains physical, chemical, and mechanical cues similar to native tissue, which prove unmatched by synthetic biomaterials alone. Moreover, these raw materials provide a head start in the regeneration of tissues by providing building blocks to be bioresorbed and incorporated into the tissue as opposed to being biodegraded into waste products and removed. This article reviews the strategies and applications of employing raw materials as components of tissue engineering constructs. Utilizing raw materials holds the potential to provide both a scaffold and a signal, perhaps even without the addition of exogenous growth factors or cytokines. Raw materials contain endogenous proteins that may also help to improve the translational success of tissue engineering solutions to progress from laboratory bench to clinical therapies. Traditionally, the tissue engineering triad has included cells, signals, and materials. Whether raw materials represent their own new paradigm or are categorized as a bridge between signals and materials, it is clear that they have emerged as a leading strategy in regenerative medicine. The common use of raw materials in commercial products as well as their growing presence in the research community speak to their potential. However, there has heretofore not been a coordinated or organized effort to classify these approaches, and as such we recommend that the use of raw materials be introduced into the collective consciousness of our field as a recognized classification of regenerative medicine strategies.

  4. Modelling of Shaded and Unshaded Shallow-Ground Heat Pump System for a Residential Building Block in a Mediterranean Climate

    Science.gov (United States)

    Bottarelli, M.; Yousif, C.

    2017-01-01

    Heat pumps may be coupled to shallow-ground geothermal fields and used for the purpose of space heating and cooling of buildings. However, quite often it is not possible to locate the geothermal field in cleared grounds, especially in cities where building density is high and land has a high premium. This leads to the possibility of burying the geothermal field under the basement of new building blocks, before construction of the building. In the present work, the shaded-unshaded arrangement is numerically studied by coupling the software DesignBuilder-EnergyPlus to assess the building’s energy requirement with the software FEFLOW to solve the heat transfer equation in porous media. Assuming a standard residential building block, the coupling between the two software is performed by assigning the thermal energy requirement for air conditioning, as calculated by EnergyPlus, to a flat-panel typology of ground heat exchanger simplified in a 2D FEFLOW’s domain. The results show that it is necessary to opt for a dual-source heat pump (air/geothermal) system to ensure that the ground is not frozen or over-heated at peak times and to improve the overall performance of the system.

  5. Dendritic Cell

    OpenAIRE

    Sevda Söker

    2005-01-01

    Dendritic cells, a member of family of antigen presenting cells, are most effective cells in the primary immune response. Dendritic cells originated from dendron, in mean of tree in the Greek, because of their long and elaborate cytoplasmic branching processes. Dendritic cells constitute approximately 0.1 to 1 percent of the blood’s mononuclear cell. Dendritic cells are widely distributed, and specialized for antigen capture and T cell stimulation. In this article, structures and functions of...

  6. A novel 300 kW arc plasma inverter system based on hierarchical controlled building block structure

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    To date, the high power arc plasma technology is widely used. A next generation high power arc plasma system based on building block structure is presented. The whole arc plasma inverter system is composed of 12 paralleled units to increase the system output capability. The hierarchical control system is adopted to improve the reliability and flexibility of the high power arc plasma inverter. To ensure the reliable turn on and off of the IGBT module in each building block unit, a special pulse drive circuit is designed by using pulse transformer. The experimental result indicates that the high power arc plasma inverter system can transfer 300 kW arc plasma energy reliably with high efficiency.

  7. Stability of proton and maximally symmetric minimal unification model for basic forces and building blocks of matter

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    With the hypothesis that all independent degrees of freedom of basic building blocks should be treated equally on the same footing and correlated by a possible maximal symmetry, we arrive at a 4-dimensional space-time unification model. In this model the basic building blocks are Majorana fermions in the spinor repre- sentation of 14-dimensional quantum space-time with a gauge symmetry GM4D = SO(1,3)×SU(32)×U(1)A×SU(3)F. The model leads to new physics including mirror particles of the standard model. It enables us to issue some fundamental questions that include: why our living space-time is 4-dimensional, why parity is not con- served in our world, how the stability of proton is, what the origin of CP violation is and what the dark matter can be.

  8. Stability of proton and maximally symmetric minimal unification model for basic forces and building blocks of matter

    Institute of Scientific and Technical Information of China (English)

    WU YueLiang

    2007-01-01

    With the hypothesis that all independent degrees of freedom of basic building blocks should be treated equally on the same footing and correlated by a possible maximal symmetry, we arrive at a 4-dimensional space-time unification model. In this model the basic building blocks are Majorana fermions in the spinor representation of 14-dimensional quantum space-time with a gauge symmetry G4MD =SO(1,3)× SU(32)× U(1)A× SU(3)F. The model leads to new physics including mirror particles of the standard model. It enables us to issue some fundamental questions that include: why our living space-time is 4-dimensional, why parity is not conserved in our world, how the stability of proton is, what the origin of CP violation is and what the dark matter can be.

  9. Use of Mixed Micelles for Presentation of Building Blocks in a New Combinatorial Discovery Methodology: Proof-of-Concept Studies

    Directory of Open Access Journals (Sweden)

    Istvan Toth

    2013-03-01

    Full Text Available We describe a new method of combinatorial screening in which building blocks, instead of being linked together chemically, are placed on the surface of nanoparticles. Two- or three-dimensional structures form on the surface of these particles through the close approach of different building blocks, with sufficient flexibility to be able to adapt and interact with putative binding sites in biological systems. The particles assemble without the need for formation of chemical bonds, so libraries comprised of many structures can be prepared rapidly, with large quantities of material available for testing. Screening methods can include solid and solution-phase binding assays, or tissue culture models, for example looking for structures which can change the behaviour of cells in a disease-modifying manner.

  10. Energy profiling of FPGA-based PHY-layer building blocks encountered in modern wireless communication systems

    OpenAIRE

    Bartzoudis, Nikolaos; Font Bach, Oriol; Payaró Llisterri, Miquel; Pascual Iserte, Antonio; Rubio López, Javier; García Fernández, Juan José; García Armada, Ana

    2014-01-01

    Proceeding at: IEEE 8th Sensor Array and Multichannel Signal Processing Workshop (SAM), took place 2014, Jun, 22-25 in Coruña (españa). The event web site of http://www.gtec.udc.es/sam2014/ . Characterizing the energy cost of different physical (PHY) layer building blocks is becoming increasingly important in modern cellular-based communications, considering the cross sector requirements for performance enhancements and energy savings. This paper presents energy profiling metrics of diffe...

  11. Motivational interviewing competencies among UK family nurse partnership nurses: a process evaluation component of the building blocks trial

    OpenAIRE

    Channon, Susan; Bekkers, Marie-Jet; Sanders, Julia; Cannings-John, Rebecca; Robertson, Laura; Bennert, Kristina; Butler, Christopher; Hood, Kerenza; Robling, Michael

    2016-01-01

    Background Motivational Interviewing (MI) is a person-centred counselling approach to behaviour change which is increasingly being used in public health settings, either as a stand-alone approach or in combination with other structured programmes of health promotion. One example of this is the Family Nurse Partnership (FNP) a licensed, preventative programme for first time mothers under the age of 20, delivered by specialist family nurses who are additionally trained in MI. The Building Block...

  12. Gear-like array of (H2O)12 as building blocks in one-dimensional supramolecular assembly

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    ray analysis revealed that every six Co(Hsae)2 forms a cyclic chip and every 12 water forms a novel gear-like cluster. Acting as building blocks, the gear-like water cluster and complex chip are connected in A-B fashion and extend into one-dimensional supramolecular chain. Hydrogen bond is the primary bridging force in the formation of supramolecular framework.

  13. Selectively fluorinated cyclohexane building blocks: Derivatives of carbonylated all-cis-3-phenyl-1,2,4,5-tetrafluorocyclohexane

    Directory of Open Access Journals (Sweden)

    Mohammed Salah Ayoup

    2015-12-01

    Full Text Available Palladium catalysed carbonylation reactions using the meta- and para-iodo derivatives of all-cis-3-phenyl-1,2,4,5-tetrafluorocyclohexane (4 are illustrated as the start point for a variety of functional group interconversions. The resultant benzaldehyde and benzoic acids offer novel building blocks for further derivatisation and facilitate the incorporation of the facially polarised all-cis-1,2,4,5-tetrafluorocyclohexane motif into more advanced molecular scaffolds.

  14. Semiconductor nanowires self-assembled from colloidal CdTe nanocrystal building blocks: optical properties and application perspectives

    OpenAIRE

    RAKOVICH, YURY; DONEGAN, JOHN FRANCIS

    2012-01-01

    PUBLISHED Solution-based self-assembly of quasi-one-dimensional semiconductor nanostructures (nanowires) from quasi-zero-dimensional (quantum dots) colloidal nanocrystal building blocks has proven itself as a powerful and flexible preparation technique. Polycrystalline CdTe nanowires self-assembled from light-emitting thiol-capped CdTe nanocrystals are the focus of this Feature Article. These nanowires represent an interesting model system for quantum dot solids, where electronic coupling ...

  15. Semiconductor nanowires self-assembled from colloidal CdTe nanocrystal building blocks: optical properties and application perspectives

    OpenAIRE

    Rakovich, Yury P.; Jäckel, Frank; Donegan, John F.; Rogach, Andrey L

    2012-01-01

    Solution-based self-assembly of quasi-one-dimensional semiconductor nanostructures (nanowires) from quasi-zero-dimensional (quantum dots) colloidal nanocrystal building blocks has proven itself as a powerful and flexible preparation technique. Polycrystalline CdTe nanowires self-assembled from light-emitting thiol-capped CdTe nanocrystals are the focus of this Feature Article. These nanowires represent an interesting model system for quantum dot solids, where electronic coupling between the i...

  16. Design and construction of self-assembling supramolecular protein complexes using artificial and fusion proteins as nanoscale building blocks.

    Science.gov (United States)

    Kobayashi, Naoya; Arai, Ryoichi

    2017-02-01

    The central goal of nanobiotechnology is to design and construct novel biomaterials of nanometer sizes. In this short review, we describe recent progress of several approaches for designing and creating artificial self-assembling protein complexes and primarily focus on the following biotechnological strategies for using artificial and fusion proteins as nanoscale building blocks: fusion proteins designed for symmetrical self-assembly; three-dimensional domain-swapped oligomers; self-assembling designed coiled-coil peptide modules; metal-directed self-assembling engineered proteins; computationally designed self-assembling de novo proteins; and self-assembling protein nanobuilding blocks (PN-Blocks) using an intermolecularly folded dimeric de novo protein. These state-of-the-art nanobiotechnologies for designing supramolecular protein complexes will facilitate the development of novel functional nanobiomaterials.

  17. Design and Field Programmable Gate Array Implementation of Basic Building Blocks for Power-Efficient Baugh-Wooley Multipliers

    Directory of Open Access Journals (Sweden)

    Muhammad H. Rais

    2010-01-01

    Full Text Available Problem statement: As growing demands on portable computing and communication systems, the power-efficient multipliers play an important role. In these multipliers basic multiplication follows the Baugh-Wooley algorithms and can easily be implemented using Field Programmable Gate Array (FPGA devices because the development cost for Application Specific Integrated Circuits (ASICs are high. These algorithms should be verified and optimized before implementation. Approach: This study presented the design and implementation of basic building blocks used in power-efficient Baugh-Wooley multipliers using FPGA Spartan-3AN device. The implementation of power-efficient Baugh-Wooley multipliers is done using Very High speed integrated circuit Hardware Description Language (VHDL. Results: The design and implementation of basic building blocks of power-efficient Baugh-Wooley multipliers showed reasonable FPGA resource utilization, which is an indication that rest of the available resources could be utilized for other embedded resources. Conclusion: The Spartan-3AN FPGA device could be used at this stage of basic building blocks reasonably.

  18. White biotechnology for green chemistry: fermentative 2-oxocarboxylic acids as novel building blocks for subsequent chemical syntheses.

    Science.gov (United States)

    Stottmeister, U; Aurich, A; Wilde, H; Andersch, J; Schmidt, S; Sicker, D

    2005-12-01

    Functionalized compounds, which are difficult to produce by classical chemical synthesis, are of special interest as biotechnologically available targets. They represent useful building blocks for subsequent organic syntheses, wherein they can undergo stereoselective or regioselective reactions. "White Biotechnology" (as defined by the European Chemical Industry [ http://www.europabio.org/white_biotech.htm ], as part of a sustainable "Green Chemistry,") supports new applications of chemicals produced via biotechnology. Environmental aspects of this interdisciplinary combination include: Use of renewable feedstock Optimization of biotechnological processes by means of: New "high performance" microorganisms On-line measurement of substrates and products in bioreactors Alternative product isolation, resulting in higher yields, and lower energy demand In this overview we describe biotechnologically produced pyruvic, 2-oxopentaric and 2-oxohexaric acids as promising new building blocks for synthetic chemistry. In the first part, the microbial formation of 2-oxocarboxylic acids (2-OCAs) in general, and optimization of the fermentation steps required to form pyruvic acid, 2-oxoglutaric acid, and 2-oxo-D-gluconic acid are described, highlighting the fundamental advantages in comparison to chemical syntheses. In the second part, a set of chemical formula schemes demonstrate that 2-OCAs are applicable as building blocks in the chemical synthesis of, e.g., hydrophilic triazines, spiro-connected heterocycles, benzotriazines, and pyranoic amino acids. Finally, some perspectives are discussed.

  19. RELATIVE DISTANCE: THE KEY TO THE SHAPE OF HEPATIC BUILDING BLOCKS

    Directory of Open Access Journals (Sweden)

    Jan M Ruijter

    2011-05-01

    Full Text Available The delineation and the shape of the smallest structural units of the liver is still the subject of debate. However,the blood flow from an upstream terminal branch of the portal vein to a downstream central vein is thought to induce a functional zonation in hepatocyte gene expression. This property was used to determine boundary conditions for the shape of the hepatic building blocks. Histochemical techniques that specifically label periportally or pericentrally expressed enzymes can be used to distinguish periportal and pericentral areas in a liver section. Pairs of images from aligned serial sections, one stained for a portal and the next for a central enzyme, are used. Segmentation and skeletonisation of these images results in the skeletons of the portal and central areas. Distance transformation with respect to these skeletons gives for each point in the image pair the distance to the nearest terminal branches of the portal vein and the central vein. For each point the relative position on the porto-central radius can then be calculated as its distance to a portal vein divided by the sum of its portal and its central distance. In the resulting relative radius image, the area occupied by 'zones' of equivalent relative radius can be measured. According to the principle of Delesse the relative area of a zone in the image is equal to the relative volume of that zone in the tissue. For structural units of plate-like, cylindrical or spherical shape, the relative volume of a zone is equal to the relative radius of that zone to the power 1, 2 or 3, respectively. Thus, the exponent in the relative area - relative radius relation gives information on the shape of the structural unit. Measurement of the areas of each relative radius zone and determination of the area - radius relation in images of random sections of adult mouse liver results in an exponent of 1.1. This suggests that the smallest structural unit of the mouse liver has the shape of a

  20. Air-core microcavities and metal-dielectric filters - building blocks for optofluidic microsystems

    Science.gov (United States)

    Allen, Trevor Warren

    This thesis describes a study on two optical devices intended to be building blocks for the creation of integrated optical/microfluidic lab-on-a-chip systems. First, arrays of curved-mirror dome-shaped microcavities were fabricated by buckling self-assembly of a-Si/SiO2 multilayers. This novel technique employs controlled, stress-induced film delamination to form highly symmetric cavities with minimal roughness defects or geometrical imperfections. Measured cavity heights were in good agreement with predictions from elastic buckling theory. Also, the measured finesse (> 103) and quality factor (> 104 in the 1550-nm range) were close to reflectance-limited predictions, indicating low defects and roughness. Hermite- and Laguerre-Gaussian modes were observable, indicating a high degree of cylindrical symmetry. In the second part of the research, transmittance in periodic metal-dielectric multilayer structures was studied. Metal-dielectric stacks have many potential applications in optofluidic microsystems, including as transmission filters, superlenses, and substrates for surface plasmon sensors. In this work, we showed that potential transmittance theory provides a good method for describing the tunneling of photons through metal-dielectric stacks, for both Fabry-Perot and surface plasmon resonances. This approach explains the well-known fact that for a given thickness of metal, subdividing the metal into several thin films can increase the maximum transmittance. Conditions for admittance matching of dielectric-metal-dielectric unit cells to an external air medium were explored for Fabry-Perot based tunneling, revealing that thicker metal films require higher-index dielectrics for optimal admittance matching. It was also shown for the first time that potential transmittance theory can be used to predict the maximum possible transmittance in surface-plasmon-mediated tunneling. In a subsequent study, potential transmittance was used to derive an expression for

  1. Identification of Biomolecular Building Blocks by Recognition Tunneling: Stride towards Nanopore Sequencing of Biomolecules

    Science.gov (United States)

    Sen, Suman

    DNA, RNA and Protein are three pivotal biomolecules in human and other organisms, playing decisive roles in functionality, appearance, diseases development and other physiological phenomena. Hence, sequencing of these biomolecules acquires the prime interest in the scientific community. Single molecular identification of their building blocks can be done by a technique called Recognition Tunneling (RT) based on Scanning Tunneling Microscope (STM). A single layer of specially designed recognition molecule is attached to the STM electrodes, which trap the targeted molecules (DNA nucleoside monophosphates, RNA nucleoside monophosphates or amino acids) inside the STM nanogap. Depending on their different binding interactions with the recognition molecules, the analyte molecules generate stochastic signal trains accommodating their "electronic fingerprints". Signal features are used to detect the molecules using a machine learning algorithm and different molecules can be identified with significantly high accuracy. This, in turn, paves the way for rapid, economical nanopore sequencing platform, overcoming the drawbacks of Next Generation Sequencing (NGS) techniques. To read DNA nucleotides with high accuracy in an STM tunnel junction a series of nitrogen-based heterocycles were designed and examined to check their capabilities to interact with naturally occurring DNA nucleotides by hydrogen bonding in the tunnel junction. These recognition molecules are Benzimidazole, Imidazole, Triazole and Pyrrole. Benzimidazole proved to be best among them showing DNA nucleotide classification accuracy close to 99%. Also, Imidazole reader can read an abasic monophosphate (AP), a product from depurination or depyrimidination that occurs 10,000 times per human cell per day. In another study, I have investigated a new universal reader, 1-(2-mercaptoethyl)pyrene (Pyrene reader) based on stacking interactions, which should be more specific to the canonical DNA nucleosides. In addition

  2. An Electronic Structure Approach to Charge Transfer and Transport in Molecular Building Blocks for Organic Optoelectronics

    Science.gov (United States)

    Hendrickson, Heidi Phillips

    A fundamental understanding of charge separation in organic materials is necessary for the rational design of optoelectronic devices suited for renewable energy applications and requires a combination of theoretical, computational, and experimental methods. Density functional theory (DFT) and time-dependent (TD)DFT are cost effective ab-initio approaches for calculating fundamental properties of large molecular systems, however conventional DFT methods have been known to fail in accurately characterizing frontier orbital gaps and charge transfer states in molecular systems. In this dissertation, these shortcomings are addressed by implementing an optimally-tuned range-separated hybrid (OT-RSH) functional approach within DFT and TDDFT. The first part of this thesis presents the way in which RSH-DFT addresses the shortcomings in conventional DFT. Environmentally-corrected RSH-DFT frontier orbital energies are shown to correspond to thin film measurements for a set of organic semiconducting molecules. Likewise, the improved RSH-TDDFT description of charge transfer excitations is benchmarked using a model ethene dimer and silsesquioxane molecules. In the second part of this thesis, RSH-DFT is applied to chromophore-functionalized silsesquioxanes, which are currently investigated as candidates for building blocks in optoelectronic applications. RSH-DFT provides insight into the nature of absorptive and emissive states in silsesquioxanes. While absorption primarily involves transitions localized on one chromophore, charge transfer between chromophores and between chromophore and silsesquioxane cage have been identified. The RSH-DFT approach, including a protocol accounting for complex environmental effects on charge transfer energies, was tested and validated against experimental measurements. The third part of this thesis addresses quantum transport through nano-scale junctions. The ability to quantify a molecular junction via spectroscopic methods is crucial to their

  3. Culture’s building blocks: Investigating cultural evolution in a LEGO construction task

    DEFF Research Database (Denmark)

    McGraw, John J.; Wallot, Sebastian; Mitkidis, Panagiotis

    2014-01-01

    the ways people develop conventions in a series of LEGO construction tasks. The data revealed a surprising pattern in the selection of building bricks as well as features of car design across consecutive building sessions. Our findings support a novel methodology for studying the development...... and transmission of culture through the microcosm of interactive LEGO design and assembly....

  4. Sick building syndrome in blocks of an academic institution of higher education

    Directory of Open Access Journals (Sweden)

    Fabián Ortiz Terán

    2015-06-01

    Full Text Available (Received: 2015/04/28 - Accepted: 2015/06/17This research focusses on characterizing the sick building syndrome (SBS on three buildings of the Engineering Sciences Faculty, at the Occidental Campus of the Universidad Tecnológica Equinoccial. By means of a comparative analysis between the prevalence result obtained within the research work and a comparison with the allowable levels according to NTP290 Spanish Code, determination was made that, in effect SBS exists in the studied buildings. The physical risk questionnaire was applied to the universe of studied people (N=64. Based on the results and in accordance to the prevalence appraisal, a proposal was formulated for the remediation of the involved working conditions on the studied buildings. This research will serve as an institutional reference for the building quality indicator of the University facilities and also for future researches.

  5. Combination of ionic self-assembly and hydrogen bonding as a tool for the synthesis of liquid-crystalline materials and organogelators from a simple building block.

    Science.gov (United States)

    Camerel, Franck; Faul, Charl F J

    2003-08-07

    In this communication we report on the facile combination of hydrogen bonding and the ionic self-assembly (ISA) process to produce organized materials and fiber-containing organogel superstructures from functionalised oligoelectrolytic building blocks.

  6. Azaborabutadienes: Synthesis by Metal-Free Carboboration of Nitriles and Utility as Building Blocks for B,N-Heterocycles.

    Science.gov (United States)

    Kong, Lingbing; Lu, Wei; Li, Yongxin; Ganguly, Rakesh; Kinjo, Rei

    2016-11-14

    Metal-free regioselective carboboration of arylnitriles with L2 PhB: (1: L=oxazol-2-ylidene) catalyzed by Et3 B afforded the unprecedented acyclic 2-aza-4-borabutadienes 2, thus demonstrating a new strategy to construct a B,C,N-mixed π-system involving B=C and C=N bonds. Thermal isomerization of 2 gave C-borylimines (3), and diverse reactivity of 2 a towards several substrates, such as H(+) , F(+) , O2 , S, Se, and isonitriles, allowed construction of boron-containing heterocycles with various ring sizes, thus illustrating the utility of 2 as a synthetic building block.

  7. Characterization of low loss microstrip resonators as a building block for circuit QED in a 3D waveguide

    Science.gov (United States)

    Zoepfl, D.; Muppalla, P. R.; Schneider, C. M. F.; Kasemann, S.; Partel, S.; Kirchmair, G.

    2017-08-01

    Here we present the microwave characterization of microstrip resonators, made from aluminum and niobium, inside a 3D microwave waveguide. In the low temperature, low power limit internal quality factors of up to one million were reached. We found a good agreement to models predicting conductive losses and losses to two level systems for increasing temperature. The setup presented here is appealing for testing materials and structures, as it is free of wire bonds and offers a well controlled microwave environment. In combination with transmon qubits, these resonators serve as a building block for a novel circuit QED architecture inside a rectangular waveguide.

  8. Building of the rating assessments of the Russian Federation subjects by the blocks of socio-economic indicators

    Directory of Open Access Journals (Sweden)

    Ekaterina Vladimirovna Molchanova

    2014-07-01

    Full Text Available The article implements the econometric approach to the building of rating assessments of the constituent entities of the Russian Federation. The author defines three blocks of indicators for the construction of integral indices: “quality of the population”, “welfare of the population” and “quality of the social sphere”. They serve as the basis for determining the value of a single combined integral indicator. The author also gives recommendations on the improvement of the medical and demographic situation and enhancement of the “quality of the population” at the regional level

  9. Building block extraction and classification by means of Markov random fields using aerial imagery and LiDAR data

    Science.gov (United States)

    Bratsolis, E.; Sigelle, M.; Charou, E.

    2016-10-01

    Building detection has been a prominent area in the area of image classification. Most of the research effort is adapted to the specific application requirements and available datasets. Our dataset includes aerial orthophotos (with spatial resolution 20cm), a DSM generated from LiDAR (with spatial resolution 1m and elevation resolution 20 cm) and DTM (spatial resolution 2m) from an area of Athens, Greece. Our aim is to classify these data by means of Markov Random Fields (MRFs) in a Bayesian framework for building block extraction and perform a comparative analysis with other supervised classification techniques namely Feed Forward Neural Net (FFNN), Cascade-Correlation Neural Network (CCNN), Learning Vector Quantization (LVQ) and Support Vector Machines (SVM). We evaluated the performance of each method using a subset of the test area. We present the classified images, and statistical measures (confusion matrix, kappa coefficient and overall accuracy). Our results demonstrate that the MRFs and FFNN perform better than the other methods.

  10. Deconstructing Building Blocks: Preschoolers' Spatial Assembly Performance Relates to Early Mathematical Skills

    Science.gov (United States)

    Verdine, Brian N.; Golinkoff, Roberta M.; Hirsh-Pasek, Kathryn; Newcombe, Nora S.; Filipowicz, Andrew T.; Chang, Alicia

    2014-01-01

    This study focuses on three main goals: First, 3-year-olds' spatial assembly skills are probed using interlocking block constructions (N = 102). A detailed scoring scheme provides insight into early spatial processing and offers information beyond a basic accuracy score. Second, the relation of spatial assembly to early mathematical skills…

  11. Power Block Geometry Applied to the Building of Power Electronics Converters

    Science.gov (United States)

    dos Santos, E. C., Jr.; da Silva, E. R. C.

    2013-01-01

    This paper proposes a new methodology, Power Block Geometry (PBG), for the presentation of power electronics topologies that process ac voltage. PBG's strategy uses formal methods based on a geometrical representation with particular rules and defines a universe with axioms and conjectures to establish a formation law. It allows power…

  12. The IMPACT Common Module - A Low Cost, Reconfigurable Building Block for Next Generation Phased Arrays

    Science.gov (United States)

    2016-03-31

    ADC ,” ISSCC Dig. Tech. Papers, pp. 182 -183, Feb. 2011. 17 A. Ali, et al. , “A 14b 1GS/s RF sampling pipelined ADC with background calibration...both communications and radar functions), etc. Although their performance is being characterized by the research community , these ESAs, and most of...IMPACT Block Diagram Analog to Digital Conversion Stanford University is providing an 8 bit analog-to-digital converter ( ADC ) capable of sampling at

  13. A new fixation strategy for addressable nano-network building blocks

    KAUST Repository

    Lundberg, Erik P.

    2010-01-01

    Rapid controlled self-assembly makes DNA ideal for building nanostructures. A problem using hybridized intermediates in hierarchic assembly is their thermodynamic lability. We demonstrate a click-fixation technology by which robust hexagonal DNA modules can be made. This principle is applicable to a wide variety of DNA nanoconstructs. © 2010 The Royal Society of Chemistry.

  14. Developing the basic building blocks of mathematics to be employed in practical embedded systems

    Energy Technology Data Exchange (ETDEWEB)

    Tickle, A J; Harvey, P K; Smith, J S [Intelligence Engineering and Industrial Automation Research Group, Department of Electrical Engineering and Electronics, The University of Liverpool, Liverpool L69 3GJ (United Kingdom); Wu, F, E-mail: a.j.tickle@liverpool.ac.u [RF Engines Ltd, Innovation Centre, St. Cross Business Park, Newport, Isle of Wight, PO30 5WB (United Kingdom)

    2009-07-01

    Mathematics is vitally important as it is used in many areas of science and engineering, in particular are functions such as sine, cosine and the exponent in addition to being to able to carry out such tasks as decimal division. The sine wave is vitally important in physics and communications due to its ability to retain its waveshape when added to another sine wave of the same frequency and arbitrary phase. It is the only periodic waveform that has this property and leads to techniques such as Fourier analysis. Unfortunately these blocks are not included in the standard DSP Builder blockset in Simulink and so a method of creating these operations must be created if this methodology is to be employed in real world tasks such as power relay protection and stereo vision systems. Shown here is a method of performing these calculations using the limited blocks provided for a 50-bit based embedded system with a discussion about the accuracy when compared to traditional digital system counterparts. The order of the equations used and the scaling factors of the blocks are investigated to provide evidence of why certain values need to be changed depending upon the calculation being performed.

  15. Synthesis of histone proteins by CPE ligation using a recombinant peptide as the C-terminal building block.

    Science.gov (United States)

    Kawakami, Toru; Yoshikawa, Ryo; Fujiyoshi, Yuki; Mishima, Yuichi; Hojo, Hironobu; Tajima, Shoji; Suetake, Isao

    2015-11-01

    The post-translational modification of histones plays an important role in gene expression. We report herein on a method for synthesizing such modified histones by ligating chemically prepared N-terminal peptides and C-terminal recombinant peptide building blocks. Based on their chemical synthesis, core histones can be categorized as two types; histones H2A, H2B and H4 which contain no Cys residues, and histone H3 which contains a Cys residue(s) in the C-terminal region. A combination of native chemical ligation and desulphurization can be simply used to prepare histones without Cys residues. For the synthesis of histone H3, the endogenous Cys residue(s) must be selectively protected, while keeping the N-terminal Cys residue of the C-terminal building block that is introduced for purposes of chemical ligation unprotected. To this end, a phenacyl group was successfully utilized to protect endogenous Cys residue(s), and the recombinant peptide was ligated with a peptide containing a Cys-Pro ester (CPE) sequence as a thioester precursor. Using this approach it was possible to prepare all of the core histones H2A, H2B, H3 and H4 with any modifications. The resulting proteins could then be used to prepare a core histone library of proteins that have been post-translationally modified.

  16. The building blocks of drinking experience across men and women: A case study with craft and industrial beers.

    Science.gov (United States)

    Gómez-Corona, Carlos; Escalona-Buendía, Héctor B; Chollet, Sylvie; Valentin, Dominique

    2017-09-01

    In today's market, every product seems to be marked by the label of "experience". It is expected that successful products give the consumer "extraordinary experiences". The research in consumption experience is growing, but much work still needs to be done to understand the food and beverage experience. A qualitative study was conducted using contextual focus groups to explore the building blocks of consumers' drinking experience of industrial and craft beers. The results show that drinking experience is shaped by our cognitive, sensory or affective systems, especially during the core consumption experience. Elements such as attitudes, consumption habits, and individual versus social consumption, shopping experience and product benefits are also responsible for shaping the experience, but are more relevant during the pre-consumption or post-consumption experience. Gender differences occur more frequently in the affective experience, as women search more for relaxation while men for excitement and stimulation while drinking beer. When comparing industrial users versus craft, in the latter the cognitive and shopping experiences are more relevant. Overall, the results showed that the drinking experience of beers can be studied as a function of the salient human system used during product interaction, and this systems act as the building blocks of the drinking experience of beer. This information can be applied in consumer research studies to further study the experiential differences across products and consumers. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Theoretical modeling of 2D porous matrices with tunable architecture: From cruciform molecular building blocks to enantioselective adsorbents

    Science.gov (United States)

    Kasperski, Adam; Rżysko, Wojciech; Szabelski, Paweł

    2016-12-01

    The ability of capturing guest molecules in a selective way is one of desirable properties of modern structured adsorbents. This refers to a wide class of guest molecules, especially to those which are chiral and whose enantiomers are to be efficiently separated. In this contribution, using Monte Carlo modeling, we show how simple molecular building blocks with cruciform shape can be used to create 2D porous matrices with tunable adsorptive properties. To that end we consider different self-assembled structures comprising cross-shaped molecules and probe their ability to retain model guest molecules differing in size and shape. In particular we focus on the adsorption of enantiomeric pairs on these substrates and quantify the associated selectivity. The obtained results show that a suitable choice of the building block, including size and aspect ratio allows for the creation of 2D functional matrices with programmed adsorption performance. The findings of our theoretical investigations can be helpful in designing molecular guest-host systems with potential applications in separations, sensing and heterogeneous catalysis.

  18. Bifunctional pincer-type organometallics as substrates for organic transformations and as novel building blocks for polymetallic materials.

    Science.gov (United States)

    Rodríguez, Gema; Albrecht, Martin; Schoenmaker, Jeroen; Ford, Alan; Lutz, Martin; Spek, Anthony L; van Koten, Gerard

    2002-05-08

    The reactivity of the bifunctionalized ligand NC(Br)N-I 1 [IC(6)H(2)(CH(2)NMe(2))(2)-3,5-Br-4] has been studied as a versatile synthon for organic and/or organometallic synthesis. Chemoselective metalation (M = Pd, Pt, Li) at the C(aryl)-I or C(aryl)-Br bonds was achieved by choosing the appropriate metal precursors. In this way a series of Pt(II) and Pd(II) complexes were prepared that have a second functional group available for further reactions. These Pt(II) and Pd(II) complexes were subjected to a wide range of organic and organometallic reactions, revealing the remarkable stability of their M-C sigma-bond and opening an easy route for the synthesis of mono- and (hetero)bimetallic building blocks. The scope of the chemistry of such building blocks shows that they are good candidates for use in the synthesis of dendrimers, bioorganometallic systems, or polymetallic materials. The X-ray crystal structures of the most representative complexes (2, 3a, 19, 20, and 24) are also reported.

  19. Prestressed hybrids of AAC and HPC : The BCE (Block Composed Element) building system. A conceptual study

    OpenAIRE

    Bagheri, Hamid

    2006-01-01

    There is an important potential for a development of a building system, if the present AACblock plants are completed with high performance concrete and pre-stressing technique. This can be done as a continuation of a present AAC production or in a site factory. Hybrid cooperation between AAC and concrete is not a new technology. Traditionally, AAC is covered with rendering. The wetted material is first sprayed with cement slurry after which comes lime/cement-based rendering which strengthens ...

  20. A tribo-mechanical analysis of PVA-based building-blocks for implementation in a 2-layered skin model.

    Science.gov (United States)

    Morales Hurtado, M; de Vries, E G; Zeng, X; van der Heide, E

    2016-09-01

    Poly(vinyl) alcohol hydrogel (PVA) is a well-known polymer widely used in the medical field due to its biocompatibility properties and easy manufacturing. In this work, the tribo-mechanical properties of PVA-based blocks are studied to evaluate their suitability as a part of a structure simulating the length scale dependence of human skin. Thus, blocks of pure PVA and PVA mixed with Cellulose (PVA-Cel) were synthesised via freezing/thawing cycles and their mechanical properties were determined by Dynamic Mechanical Analysis (DMA) and creep tests. The dynamic tests addressed to elastic moduli between 38 and 50kPa for the PVA and PVA-Cel, respectively. The fitting of the creep compliance tests in the SLS model confirmed the viscoelastic behaviour of the samples with retardation times of 23 and 16 seconds for the PVA and PVA-Cel, respectively. Micro indentation tests were also achieved and the results indicated elastic moduli in the same range of the dynamic tests. Specifically, values between 45-55 and 56-81kPa were obtained for the PVA and PVA-Cel samples, respectively. The tribological results indicated values of 0.55 at low forces for the PVA decreasing to 0.13 at higher forces. The PVA-Cel blocks showed lower friction even at low forces with values between 0.2 and 0.07. The implementation of these building blocks in the design of a 2-layered skin model (2LSM) is also presented in this work. The 2LSM was stamped with four different textures and their surface properties were evaluated. The hydration of the 2LSM was also evaluated with a corneometer and the results indicated a gradient of hydration comparable to the human skin.

  1. Energy Efficiency and Conservation Block Grant (EECBG)- Better Buildings Neighborhood Program Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Donisha; Harris, Barbara; Blue, Cynthia; Gaskins, Charla

    2014-09-16

    The original BetterBuildings for Greensboro grant program included an outreach campaign to inform 100% of the Greensboro community about the benefits of reducing energy use; a plan to reduce energy consumption in at least 34% of the homes and 10% of the other buildings in the east Greensboro target area; and a plan to create and retain jobs in the energy conservation industry. Under the original program structure the City of Greensboro planned to partner with local and regional lenders to create a diversified portfolio of loan products to meet the needs of various income levels and building types. All participants would participate in the loan programs as a method of meeting the program’s 5 to1 private capital match/leverage requirements. In June 2011 the program was restructured to include partnerships with large commercial and multifamily projects, with these partners providing the greater portion of the required match/leverage. The geographic focus was revised to include reducing energy consumption across the entire City of Greensboro, targeting neighborhoods with high concentrations of low-moderate income households and aged housing stock. The community outreach component used a neighborhood-based approach to train community residents and volunteers to conduct door-to-door neighborhood sweeps; delivered high quality information on available program resources; helped residents to evaluate alternative energy efficiency measures and alternative financing sources; assisted with contractor selections and monitoring/evaluation of work; coordinated activities with BetterBuildings program partners; and collected data required by the Department of Energy. Additionally, HERO (Home Energy Response Officers) delivered intro packages (energy efficiency information and products) to thousands of households at the initial point of contact. A pilot program (Early Adopters) was offered from March 1, 2011 through June 30, 2011. The Early Adopters program was designed to offer

  2. Computer-aided design of nanostructures from self- and directed-assembly of soft matter building blocks

    Science.gov (United States)

    Nguyen, Trung Dac

    2011-12-01

    Functional materials that are active at nanometer scales and adaptive to environment have been highly desirable for a huge array of novel applications ranging from photonics, sensing, fuel cells, smart materials to drug delivery and miniature robots. These bio-inspired features imply that the underlying structure of this type of materials should possess a well-defined ordering as well as the ability to reconfigure in response to a given external stimulus such as temperature, electric field, pH or light. In this thesis, we employ computer simulation as a design tool, demonstrating that various ordered and reconfigurable structures can be obtained from the self- and directed-assembly of soft matter nano-building blocks such as nanoparticles, polymer-tethered nanoparticles and colloidal particles. We show that, besides thermodynamic parameters, the self-assembly of these building blocks is governed by nanoparticle geometry, the number and attachment location of tethers, solvent selectivity, balance between attractive and repulsive forces, nanoparticle size polydispersity, and field strength. We demonstrate that higher-order nanostructures, i.e. those for which the correlation length is much greater than the length scale of individual assembling building blocks, can be hierarchically assembled. For instance, bilayer sheets formed by laterally tethered rods fold into spiral scrolls and helical structures, which are able to adopt different morphologies depending on the environmental condition. We find that a square grid structure formed by laterally tethered nanorods can be transformed into a bilayer sheet structure, and vice versa, upon shortening, or lengthening, the rod segments, respectively. From these inspiring results, we propose a general scheme by which shape-shifting particles are employed to induce the reconfiguration of pre-assembled structures. Finally, we investigate the role of an external field in assisting the formation of assembled structures that would

  3. The Magic Au60 Nanocluster: A New Cluster-Assembled Material with Five Au13 Building Blocks.

    Science.gov (United States)

    Song, Yongbo; Fu, Fangyu; Zhang, Jun; Chai, Jinsong; Kang, Xi; Li, Peng; Li, Shengli; Zhou, Hongping; Zhu, Manzhou

    2015-07-13

    Herein, we report the synthesis and atomic structure of the cluster-assembled [Au60Se2(Ph3P)10(SeR)15](+) material. Five icosahedral Au13 building blocks from a closed gold ring with Au-Se-Au linkages. Interestingly, two Se atoms (without the phenyl tail) locate in the center of the cluster, stabilized by the Se-(Au)5 interactions. The ring-like nanocluster is unprecedented in previous experimental and theoretical studies of gold nanocluster structures. In addition, our optical and electrochemical studies show that the electronic properties of the icosahedral Au13 units still remain unchanged in the penta-twinned Au60 nanocluster, and this new material might be a promising in optical limiting material. This work offers a basis for deep understanding on controlling the cluster-assembled materials for tailoring their functionalities. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Hierarchical assembly of inorganic nanostructure building blocks to octahedral superstructures-a true template-free self-assembly

    Energy Technology Data Exchange (ETDEWEB)

    Kuchibhatla, Satyanarayana V N T [Advanced Materials Processing and Analysis Center, University of Central Florida, Orlando, FL-32816 (United States); Karakoti, Ajay S [Advanced Materials Processing and Analysis Center, University of Central Florida, Orlando, FL-32816 (United States); Seal, Sudipta [Advanced Materials Processing and Analysis Center, University of Central Florida, Orlando, FL-32816 (United States)

    2007-02-21

    A room temperature, template-free, wet chemical synthesis of ceria nanoparticles and their long term ageing characteristics are reported. High resolution transmission electron microscopy and UV-visible spectroscopy techniques are used to observe the variation in size, structure and oxidation state, respectively as a function of time. The morphology variation and the hierarchical assembly (octahedral superstructure) of nanostructures are imputed to the inherent structural aspects of cerium oxide. It is hypothesized that the 3-5 nm individual building blocks will undergo an intra-agglomerate re-orientation to attain the low energy configuration. This communication also emphasizes the need for long term ageing studies of nanomaterials in various solvents for multiple functionalities.

  5. Bark polyflavonoids from Pinus radiata as functional building-blocks for polylactic acid (PLA-based green composites

    Directory of Open Access Journals (Sweden)

    D. E. Garcia

    2016-10-01

    Full Text Available Polylactic acid (PLA was melt-blended with Pinus radiata unmodified and modified (hydroxypropyled bark polyflavonoids in order to use such polyphenolic building-blocks as functional additives for envisaged applications. Rheological, morphological, molecular, thermal, and flexural properties were studied. Polyflavonoids improved blend processability in terms of short-time mixing. Furthermore, hydroxypropylated polyflavonoids improve miscibility in binary and ternary blends. Blend-composition affects crystallization-, melting-, and glass transition-temperature of PLA, as well as thermal resistance, and flexural properties of the blends. Polyflavonoids induced PLA-crystallization, and polymer-chain decomposition. Modified and unmodified bark polyflavonoids from radiata pine can be used successfully in PLA-based green composites beyond the food-packaging applications. The high compatibility between PLA and hydroxypropyled polyflavonoids highlights the potential of such phenolic derivatives for PLA-based material design.

  6. Naphthalene Bis(4,8-diamino-1,5-dicarboxyl)amide Building Block for Semiconducting Polymers.

    Science.gov (United States)

    Eckstein, Brian J; Melkonyan, Ferdinand S; Manley, Eric F; Fabiano, Simone; Mouat, Aidan R; Chen, Lin X; Facchetti, Antonio; Marks, Tobin J

    2017-09-26

    We report a new naphthalene bis(4,8-diamino-1,5-dicarboxyl)amide (NBA) building block for polymeric semiconductors. Computational modeling suggests that regio-connectivity at the 2,6- or 3,7-NBA positions strongly modulates polymer backbone torsion and, therefore, intramolecular -conjugation and aggregation. Optical, electrochemical, and X-ray diffraction characterization of 3,7- and 2,6-dithienyl-substituted NBA molecules and corresponding isomeric NBA-bithiophene co-polymers P1 and P2, respectively, reveal the key role of regio-connectivity. Charge transport measurements demonstrate that while the twisted 3,7-NDA-based P1 is a poor semiconductor, the planar 2,6-functionalized NBA polymers (P2-P4) exhibit ambipolarity with µe and µh of up to 0.39 and 0.32 cm2/(V·s) , respectively.

  7. An Overview of Metallic Nanowire Networks, Promising Building Blocks for Next Generation Transparent Conductors: Emergence, Fundamentals and Challenges

    Science.gov (United States)

    Pirsalami, Sedigheh; Zebarjad, Seyed Mojtaba; Daneshmanesh, Habib

    2017-08-01

    Transparent conductors (TCs) have a wide range of applications in numerous electronic and optoelectronic devices. This review provides an overview of the emergence of metallic nanowire networks (MNNs) as promising building blocks for the next generation transparent conductors. The fundamental aspects, structure-property relations, fabrication techniques and the corresponding challenges are reviewed. Theoretical and experimental researches suggest that nanowires with smaller diameter, longer length and higher aspect ratio have higher performance. Yet, the development of an efficient synthesis technique for the production of MNNs has remained a challenge. The synthesis method is also crucial to the scalability and the commercial potential of these emerging TCs. The most promising techniques for the synthesis together with their advantages, limitations and the recent findings are here discussed. Finally, we will try to show the promising future research trends in MNNs to have an approach to design the next generation TCs.

  8. Chemical evolution of biomolecule building blocks. Can thermodynamics explain the accumulation of glycine in the prebiotic ocean?

    Science.gov (United States)

    Szori, Milán; Jójárt, Balázs; Izsák, Róbert; Szori, Kornél; Csizmadia, Imre G; Viskolcz, Béla

    2011-04-28

    It has always been a question of considerable scientific interest why amino acids (and other biomolecule building blocks) formed and accumulated in the prebiotic ocean. In this study, we suggest an answer to this question for the simplest amino acid, glycine. We have shown for the first time that classical equilibrium thermodynamics can explain the most likely selection of glycine (and the derivative of its dipeptide) in aqueous media, although glycine is not the lowest free energy structure among all (404) possible constitutional isomers. Species preceding glycine in the free energy order are either supramolecular complexes of small molecules or such molecules likely to dissociate and thus get back to the gas phase. Then, 2-hydroxyacetamide condensates yielding a thermodynamically favored derivative of glycine dipeptide providing an alternative way for peptide formation. It is remarkable that a simple equilibrium thermodynamic model can explain the accumulation of glycine and provide a reason for the importance of water in the formation process.

  9. Combining a Ru(II) "Building Block" and Rapid Screening Approach to Identify DNA Structure-Selective "Light Switch" Compounds.

    Science.gov (United States)

    Wachter, Erin; Moyá, Diego; Glazer, Edith C

    2017-02-13

    A chemically reactive Ru(II) "building block", able to undergo condensation reactions with substituted diamines, was utilized to create a small library of luminescent "light switch" dipyrido-[3,2-a:2',3'-c] phenazine (dppz) complexes. The impact of substituent identity, position, and the number of substituents on the light switch effect was investigated. An unbiased, parallel screening approach was used to evaluate the selectivity of the compounds for a variety of different biomolecules, including protein, nucleosides, single stranded DNA, duplex DNA, triplex DNA, and G-quadruplex DNA. Combining these two approaches allowed for the identification of hit molecules that showed different selectivities for biologically relevant DNA structures, particularly triplex and quadruplex DNA.

  10. Microring resonator-based diamond optothermal switch: a building block for a quantum computing network

    Science.gov (United States)

    Huang, Zhihong; Faraon, Andrei; Santori, Charles; Acosta, Victor; Beausoleil, Raymond G.

    2013-03-01

    The negatively-charged nitrogen-vacancy centers in diamond has motivated many groups building scalable quantum information processors based on diamond photonics. This is owning to the long-lived electronic spin coherence and the capability for spin manipulation and readout of NV centers.1-4 The primitive operation is to create entanglement between two NV centers, based on schemes such as 'atom-photon entanglement' proposed by Cabrillo et al.5To scale this type of scheme beyond two qubits, one important component is an optical switch that allows light emitted from a particular device to be routed to multiple locations. With such a switch, one has choices of routing photons to specified paths and has the benefit of improving the entanglement speed by entangling multiple qubits at the same time. Yield of the existing diamond cavities coupled with NV centers are inevitably low, due to the nature of randomness for NV placement and orientation, variation of spectral stability, and variation of cavity resonance frequency and quality factor. An optical switch provides the capability to tolerate a large fraction of defective devices by routing only to the working devices. Many type of switching devices were built on conventional semiconductor materials with mechanisms from mechanical, thermal switching to carrier injection, photonics crystal, and polymer refractive index tuning .6-8 In this paper, we build an optical-thermal switch on diamond with micro-ring waveguides, mainly for the simplicity of the diamond fabrication. The the switching function was realized by locally tuning the temperature of the diamond waveguides. Switching efficiency of 31% at 'drop' port and 73% at 'through' port were obtained.

  11. Molecular modeling of the elastomeric properties of repeating units and building blocks of resilin, a disordered elastic protein.

    Science.gov (United States)

    Khandaker, Md Shahriar K; Dudek, Daniel M; Beers, Eric P; Dillard, David A; Bevan, David R

    2016-08-01

    The mechanisms responsible for the properties of disordered elastomeric proteins are not well known. To better understand the relationship between elastomeric behavior and amino acid sequence, we investigated resilin, a disordered rubber-like protein, found in specialized regions of the cuticle of insects. Resilin of Drosophila melanogaster contains Gly-rich repetitive motifs comprised of the amino acids, PSSSYGAPGGGNGGR, which confer elastic properties to resilin. The repetitive motifs of insect resilin can be divided into smaller partially conserved building blocks: PSS, SYGAP, GGGN and GGR. Using molecular dynamics (MD) simulations, we studied the relative roles of SYGAP, and its less common variants SYSAP and TYGAP, on the elastomeric properties of resilin. Results showed that SYGAP adopts a bent structure that is one-half to one-third the end-to-end length of the other motifs having an equal number of amino acids but containing SYSAP or TYGAP substituted for SYGAP. The bent structure of SYGAP forms due to conformational freedom of glycine, and hydrogen bonding within the motif apparently plays a role in maintaining this conformation. These structural features of SYGAP result in higher extensibility compared to other motifs, which may contribute to elastic properties at the macroscopic level. Overall, the results are consistent with a role for the SYGAP building block in the elastomeric properties of these disordered proteins. What we learned from simulating the repetitive motifs of resilin may be applicable to the biology and mechanics of other elastomeric biomaterials, and may provide us the deeper understanding of their unique properties.

  12. Synthesis of a Versatile Building Block Combining Cyclen-derivative DO3A with a Polyamine via a Rigid Spacer

    Directory of Open Access Journals (Sweden)

    Zdeněk Trávníček

    2013-11-01

    Full Text Available The five-step synthesis of a polydentate building block combining a cyclen-based macrocycle (DO3A with N-(2-aminoethylpropane-1,3-diamine, which are linked through the xylylen moiety as a rigid C-spacer is described. These two molecular parts were coupled by subsequent bromine atom substitution in 1,4-bis(bromomethylbenzene. First, N-(2-aminoethylpropane-1,3-diamine was protected by phthaloyl moieties and then it was reacted with 1,4-bis(bromomethylbenzene to form (2-phthalimidoethyl(3-phthalimido-prop-1-yl(4-bromomethylbenzylamine (2. This compound underwent a substitution reaction with DO3A in the form of its tert-butyl esters leading to the intermediate 1-{4-[(2-phthalimidoethyl(3-phthalimidoprop-1-ylaminomethyl]phenylmethyl}-4,7,10-tris(t-butoxy-carbonylmethyl-1,4,7,10-tetraazacyclododecane (3. The phthaloyl as well as the t-butyl protecting groups were removed in the next two reaction steps to form the final product 1-{4-[(2-aminoethyl(3-aminoprop-1-ylaminomethyl]phenylmethyl}-4,7,10-tris(carboxy-methyl-1,4,7,10-tetraazacyclododecane (5. The intermediates 1–4 as well as the final product 5 were characterized by elemental analysis, mass spectrometry, and multinuclear (1H and 13C and two-dimensional NMR spectroscopy. The final product 5 could serve as a potential building block in subsequent syntheses of binuclear complexes of lanthanides and/or transition metals.

  13. Preparation of a disulfide-linked precipitative soluble support for solution-phase synthesis of trimeric oligodeoxyribonucleotide 3´-(2-chlorophenylphosphate building blocks

    Directory of Open Access Journals (Sweden)

    Amit M. Jabgunde

    2015-09-01

    Full Text Available The preparation of a disulfide-tethered precipitative soluble support and its use for solution-phase synthesis of trimeric oligodeoxyribonucleotide 3´-(2-chlorophenylphosphate building blocks is described. To obtain the building blocks, N-acyl protected 2´-deoxy-5´-O-(4,4´-dimethoxytritylribonucleosides were phosphorylated with bis(benzotriazol-1-yl 2-chlorophenyl phosphate. The “outdated” phosphotriester strategy, based on coupling of PV building blocks in conjunction with quantitative precipitation of the oligodeoxyribonucleotide with MeOH is applied. Subsequent release of the resulting phosphate and base-protected oligodeoxyribonucleotide trimer 3’-pTpdCBzpdGibu-5’ as its 3’-(2-chlorophenyl phosphate was achieved by reductive cleavage of the disulfide bond.

  14. Preparation of a disulfide-linked precipitative soluble support for solution-phase synthesis of trimeric oligodeoxyribonucleotide 3´-(2-chlorophenylphosphate) building blocks

    Science.gov (United States)

    Molina, Alejandro Gimenez; Virta, Pasi; Lönnberg, Harri

    2015-01-01

    Summary The preparation of a disulfide-tethered precipitative soluble support and its use for solution-phase synthesis of trimeric oligodeoxyribonucleotide 3´-(2-chlorophenylphosphate) building blocks is described. To obtain the building blocks, N-acyl protected 2´-deoxy-5´-O-(4,4´-dimethoxytrityl)ribonucleosides were phosphorylated with bis(benzotriazol-1-yl) 2-chlorophenyl phosphate. The “outdated” phosphotriester strategy, based on coupling of PV building blocks in conjunction with quantitative precipitation of the oligodeoxyribonucleotide with MeOH is applied. Subsequent release of the resulting phosphate and base-protected oligodeoxyribonucleotide trimer 3’-pTpdCBzpdGibu-5’ as its 3’-(2-chlorophenyl phosphate) was achieved by reductive cleavage of the disulfide bond. PMID:26664575

  15. Building-block architecture of botulinum toxin complex: Conformational changes provide insights into the hemagglutination ability of the complex

    Directory of Open Access Journals (Sweden)

    Tomonori Suzuki

    2017-03-01

    Full Text Available Clostridium botulinum produces the botulinum neurotoxin (BoNT. Previously, we provided evidence for the “building-block” model of botulinum toxin complex (TC. In this model, a single BoNT is associated with a single nontoxic nonhemagglutinin (NTNHA, yielding M-TC; three HA-70 molecules are attached and form M-TC/HA-70, and one to three “arms” of the HA-33/HA-17 trimer (two HA-33 and one HA-17 further bind to M-TC/HA-70 via HA-17 and HA-70 binding, yielding one-, two-, and three-arm L-TC. Of all TCs, only the three-arm L-TC caused hemagglutination. In this study, we determined the solution structures for the botulinum TCs using small-angle X-ray scattering (SAXS. The mature three-arm L-TC exhibited the shape of a “bird spreading its wings”, in contrast to the model having three “arms”, as revealed by transmission electron microscopy. SAXS images indicated that one of the three arms of the HA-33/HA-17 trimer bound to both HA-70 and BoNT. Taken together, these findings regarding the conformational changes in the building-block architecture of TC may explain why only three-arm L-TC exhibited hemagglutination.

  16. Building block diode laser concept for high brightness laser output in the kW range and its applications

    Science.gov (United States)

    Ferrario, Fabio; Fritsche, Haro; Grohe, Andreas; Hagen, Thomas; Kern, Holger; Koch, Ralf; Kruschke, Bastian; Reich, Axel; Sanftleben, Dennis; Steger, Ronny; Wallendorf, Till; Gries, Wolfgang

    2016-03-01

    The modular concept of DirectPhotonics laser systems is a big advantage regarding its manufacturability, serviceability as well as reproducibility. By sticking to identical base components an economic production allows to serve as many applications as possible while keeping the product variations minimal. The modular laser design is based on single emitters and various combining technics. In a first step we accept a reduction of the very high brightness of the single emitters by vertical stacking several diodes in fast axis. This can be theoretically done until the combined fast axis beam quality is on a comparable level as the individual diodes slow axis beam quality without loosing overall beam performance after fiber coupling. Those stacked individual emitters can be wavelength stabilized by an external resonator, providing the very same feedback to each of those laser diodes which leads to an output power of about 100 W with BPP of stacking those building blocks using the very same dense spectral combing technique up to multi kW Systems without further reduction of the BPP. The 500 W building blocks are consequently designed in a way that they feature a high flexibility with regard to their emitting wavelength bandwidth. Therefore, new wavelengths can be implemented by only exchanging parts and without any additional change of the production process. This design principal theoretically offers the option to adapt the wavelength of those blocks to any applications, from UV, visible into the far IR as long as there are any diodes commercially available. This opens numerous additional applications like laser pumping, scientific applications, materials processing such as cutting and welding of copper aluminum or steel and also medical application. Typical operating at wavelengths in the 9XX nm range, these systems are designed for and mainly used in cutting and welding applications, but adapted wavelength ranges such as 793 nm and 1530 nm are also offered. Around 15

  17. Nanoscale building blocks in a novel lithium arsenotungsten bronze: Synthesis and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Pei [Chemische Kristallographie fester Stoffe, Universität Bremen, Leobener Straße, D-28359 Bremen (Germany); Mangir Murshed, M., E-mail: murshed@uni-bremen.de [Chemische Kristallographie fester Stoffe, Universität Bremen, Leobener Straße, D-28359 Bremen (Germany); Huq, Ashfia [Chemical and Engineering Materials Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Grossmann, Henrike K.; Mädler, Lutz [Foundation Institute of Materials Science (IWT), Department of Production Engineering, University of Bremen, Badgasteiner Strasse 3, D-28359 Bremen (Germany); Alekseev, Evgeny V. [Institute of Energy and Climate Research (IEK-6), Forschungszentrum Jülich, D-52428 Jülich, and Institut für Kristallographie, RWTH Aachen, Jägerstraße 17-19, D-52066 Aachen (Germany); Gesing, Thorsten M. [Chemische Kristallographie fester Stoffe, Universität Bremen, Leobener Straße, D-28359 Bremen (Germany)

    2015-03-15

    We report on a novel compound Li{sub 3}AsW{sub 7}O{sub 25} obtained by solid-state reaction and characterized by diffraction and spectroscopic methods. The bronze-type compound crystallizes in the orthorhombic space group Pbca with a=724.38(3) pm, b=1008.15(4) pm, c=4906.16(17) pm and Z=8. The structure is built up by chains of WO{sub 6} octahedra interconnected by AsO{sub 4} tetrahedra and WO{sub 6} octahedra forming a polyhedral arrangement as seen in intergrowth tungsten bronzes. The X-ray single crystal structure refinement allows solving the complex arsenotungstate framework. The powder neutron diffraction data analysis locates the lithium atoms. Thermal analysis showed that Li{sub 3}AsW{sub 7}O{sub 25} is stable up to its melting at 1135(3) K followed by a decomposition at 1182(5) K. The Kubelka–Munk treatment of the UV–vis spectrum revealed a wide band gap in the range of 2.84–3.40 eV depending on the presumed electron transition type. - Graphical abstract: Crystal structure of Li{sub 3}AsW{sub 7}O{sub 25} showing different schematic components. - Highlights: • A report on a novel compound Li{sub 3}AsW{sub 7}O{sub 25} obtained by solid-state reaction. • Chains and nano-blocks of WO{sub 6} octahedra and AsO{sub 4} tetrahedra formed a structure like intergrowth tungsten bronzes. • X-ray diffraction allowed solving the complex arsenotungstate framework. • Powder neutron diffraction data analysis locates the lithium atoms. • UV–vis spectrum revealed the band-gap.

  18. Bacillus spores as building blocks for stimuli-responsive materials and nanogenerators

    Science.gov (United States)

    Chen, Xi; Mahadevan, L.; Driks, Adam; Sahin, Ozgur

    2014-02-01

    Materials that respond mechanically to external chemical stimuli have applications in biomedical devices, adaptive architectural systems, robotics and energy harvesting. Inspired by biological systems, stimuli-responsive materials have been created that can oscillate, transport fluid, provide homeostasis and undergo complex changes in shape. However, the effectiveness of synthetic stimuli-responsive materials in generating work is limited when compared with mechanical actuators. Here, we show that the mechanical response of Bacillus spores to water gradients exhibits an energy density of more than 10 MJ m-3, which is two orders of magnitude higher than synthetic water-responsive materials. We also identified mutations that can approximately double the energy density of the spores and found that they can self-assemble into dense, submicrometre-thick monolayers on substrates such as silicon microcantilevers and elastomer sheets, creating bio-hybrid hygromorph actuators. To illustrate the potential applications of the spores, we used them to build an energy-harvesting device that can remotely generate electrical power from an evaporating body of water.

  19. 5,10-linked naphthodithiophenes as the building block for semiconducting polymers

    Science.gov (United States)

    Osaka, Itaru; Komatsu, Koki; Koganezawa, Tomoyuki; Takimiya, Kazuo

    2014-04-01

    We present new semiconducting polymers incorporating naphtho[1, 2-b:5, 6-b‧] dithiophene (NDT3) and naphtho[2, 1-b:6, 5-b‧] dithiophene (NDT4), which are linked at the naphthalene positions, in the polymer backbone. It is interesting that the trend in the ordering structure and thus charge transport properties are quite different from what were observed in the isomeric polymers where the NDT3 and NDT4 cores are linked at the thiophene α-positions. In the thiophene-linked NDT system, the NDT3-based polymer (PNDT3BT) gave the better ordering in thin films and thus the high charge carrier mobility compared to the NDT4-based polymer (PNDT4BT). In the meantime, in the naphthalene-linked NDT system, the NDT4-based polymer (PNDT4iBT) provided the superior properties. Considering that PNDT4iBT has relatively low highest occupied molecular orbital (HOMO) energy level (-5.2 eV) and moderately high mobilities in the order of 10-2 cm2 V-1 s-1, the NDT4 core, when linked at the naphthalene positions, can be a good building unit for the development of high-performance semiconducting polymers for both organic field-effect transistors and photovoltaic devices.

  20. Methyl chloride via oxyhydrochlorination of methane: A building block for chemicals and fuels from natural gas

    Energy Technology Data Exchange (ETDEWEB)

    Benson, R.L.; Brown, S.S.D.; Ferguson, S.P.; Jarvis, R.F. Jr. [Dow Corning Corp., Carrollton, KY (United States)

    1995-12-31

    The objectives of this program are to (a) develop a process for converting natural gas to methyl chloride via an oxyhydrochlorination route using highly selective, stable catalysts in a fixed-bed, (b) design a reactor capable of removing the large amount of heat generated in the process so as to control the reaction, (c) develop a recovery system capable of removing the methyl chloride from the product stream and (d) determine the economics and commercial viability of the process. The general approach has been as follows: (a) design and build a laboratory scale reactor, (b) define and synthesize suitable OHC catalysts for evaluation, (c) select first generation OHC catalyst for Process Development Unit (PDU) trials, (d) design, construct and startup PDU, (e) evaluate packed bed reactor design, (f) optimize process, in particular, product recovery operations, (g) determine economics of process, (h) complete preliminary engineering design for Phase II and (i) make scale-up decision and formulate business plan for Phase II. Conclusions regarding process development and catalyst development are presented.

  1. 5,10-linked naphthodithiophenes as the building block for semiconducting polymers

    Directory of Open Access Journals (Sweden)

    Itaru Osaka

    2014-04-01

    Full Text Available We present new semiconducting polymers incorporating naphtho[1, 2-b:5, 6-b'] dithiophene (NDT3 and naphtho[2, 1-b:6, 5-b'] dithiophene (NDT4, which are linked at the naphthalene positions, in the polymer backbone. It is interesting that the trend in the ordering structure and thus charge transport properties are quite different from what were observed in the isomeric polymers where the NDT3 and NDT4 cores are linked at the thiophene α-positions. In the thiophene-linked NDT system, the NDT3-based polymer (PNDT3BT gave the better ordering in thin films and thus the high charge carrier mobility compared to the NDT4-based polymer (PNDT4BT. In the meantime, in the naphthalene-linked NDT system, the NDT4-based polymer (PNDT4iBT provided the superior properties. Considering that PNDT4iBT has relatively low highest occupied molecular orbital (HOMO energy level (−5.2 eV and moderately high mobilities in the order of 10−2 cm2 V−1 s−1, the NDT4 core, when linked at the naphthalene positions, can be a good building unit for the development of high-performance semiconducting polymers for both organic field-effect transistors and photovoltaic devices.

  2. Automated learning of generative models for subcellular location: building blocks for systems biology.

    Science.gov (United States)

    Zhao, Ting; Murphy, Robert F

    2007-12-01

    The goal of location proteomics is the systematic and comprehensive study of protein subcellular location. We have previously developed automated, quantitative methods to identify protein subcellular location families, but there have been no effective means of communicating their patterns to integrate them with other information for building cell models. We built generative models of subcellular location that are learned from a collection of images so that they not only represent the pattern, but also capture its variation from cell to cell. Our models contain three components: a nuclear model, a cell shape model and a protein-containing object model. We built models for six patterns that consist primarily of discrete structures. To validate the generated images, we showed that they are recognized with reasonable accuracy by a classifier trained on real images. We also showed that the model parameters themselves can be used as features to discriminate the classes. The models allow the synthesis of images with the expectation that they are drawn from the same underlying statistical distribution as the images used to train them. They can potentially be combined for many proteins to yield a high resolution location map in support of systems biology.

  3. Achieving high performance non-fullerene organic solar cells through tuning the numbers of electron deficient building blocks of molecular acceptors

    Science.gov (United States)

    Yang, Lei; Chen, Yusheng; Chen, Shangshang; Dong, Tao; Deng, Wei; Lv, Lei; Yang, Saina; Yan, He; Huang, Hui

    2016-08-01

    Two analogous dimer and tetramer compounds, SF-PDI2 and SF-PDI4, were designed, theoretically calculated, synthesized, and developed as electron acceptors for organic solar cells. The effects of the number of the electron deficient building blocks on the optical absorption, energy levels, charge transport, morphology, crystallinity, and photovoltaic performance of the molecules were investigated. In combination with two different donors, PTB7-Th and PffBT4T-2OD, the results showed that increasing the numbers of PDI building blocks is beneficial to photovoltaic performance and leads to efficiency over 5%.

  4. Quarks, atoms, molecules. On the hunt for the smallest building blocks of the world; Quarks, Atome, Molekuele. Auf der Jagd nach den kleinsten Bausteinen der Welt

    Energy Technology Data Exchange (ETDEWEB)

    Staguhn, Gerhard

    2012-07-01

    What exactly are molecules, atoms, quarks - the enigmating smallest building blocks of all life? By this book even hardcore physics and chemistry muffles become experts. The reknown science journalist Gerhard Staguhn embarks on a thrilling quest to find out what holds our world together: The smallest building blocks of the universe, the tiny operations that are taking place in the invisible world of the microcosm. In 69 chapters he tells fascinatingly and easily to be understood from the properties of the atoms and why the quarks until today prefer to be not seen.

  5. [Inflammatory dendritic cells].

    Science.gov (United States)

    Segura, Elodie; Amigorena, Sebastian

    2014-01-01

    Dendritic cells are a rare and heterogeneous population of professional antigen-presenting cells. Several murine dendritic cell subpopulations have been identified that differ in their phenotype and functional properties. In the steady state, committed dendritic cell precursors differentiate into lymphoid organ-resident dendritic cells and migratory tissue dendritic cells. During inflammation appears an additional dendritic cell subpopulation that has been termed « inflammatory dendritic cells ». Inflammatory dendritic cells differentiate in situ from monocytes recruited to the site of inflammation. Here, we discuss how mouse inflammatory dendritic cells differ from macrophages and from other dendritic cell populations. Finally, we review recent work on human inflammatory dendritic cells.

  6. Winter energy behaviour in multi-family block buildings in a temperate-cold climate in Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Filippin, C. [CONICET - CC302, Santa Rosa, 6300 La Pampa (Argentina); Larsen, S. Flores [CONICET - CC302, Santa Rosa, 6300 La Pampa (Argentina); INENCO - Instituto de Investigaciones en Energias No Convencionales, U.N.Sa., CONICET, Avda. Bolivia 5150 - CP 4400, Salta Capital (Argentina); Mercado, V. [LAHV-Laboratorio de Ambienet Humano y Vivienda (INCIHUSA-CCT-CONICET) (Argentina)

    2011-01-15

    This paper analyzes the thermal and energy behaviour of apartments in three-story block buildings located along a NE-SW axis (azimuth = 120 ) in a temperate-cold climate (latitude: 36 57'; longitude: 64 27') in the city of Santa Rosa, La Pampa, central Argentina. Four apartments had been monitored during May and June 2009. Three of them are located in Block 126. Two of these apartments face South: 15 and 23 on the SE end, ground and first floor, respectively; 18 faces N on the second floor. Finally apartment, 12 is located in Block 374, on the first floor, faces N and shows a carpentry-closed balcony. The purpose of this work is - to study the evolution of the indoor temperature in each apartment; to analyze energy consumption and comfort conditions; to study energy potential and energy intervention in order to reduce energy consumption; to analyze bioclimatic alternatives feasibility and the possibility to extrapolate results to all blocks. On the basis of the analysis of natural gas historical consumption records, results showed that regarding heating energy consumption during the period May-June, Apartment 12, facing N, with its only bedroom facing NW and its carpentry-closed, transparent glass balcony, presented a mean temperature of 21.2 C, using a halogen heater for 6 h/day between 9 pm and 2 am (0.16 kWh/day/m{sup 2}). Apartment 15, on the SE end, first floor of the block consumed 22.5 kWh/day (0.43 kWh/day/m{sup 2}) (mean temperature = 22.2 C). Apartment 23, located on the second and top floor (on top of Apartment 15) with higher energy loss, consumed 28 kWh/day (0.54 kWh/day/m{sup 2}) (mean temperature 23.7 C). Apartment 18, also on the second floor and facing N, located in the centre and with its only bedroom facing SE, consumed 18.8 kWh/day (0.48 kWh/day/m{sup 2}) (mean temperature = 22.3 C). Apartment 23, with higher thermal loss through its envelope, but with heat transfer from the apartment located below, is the one that showed the highest

  7. Lightweight concrete blocks with EVA recycled aggregate: a contribution to the thermal efficiency of building external walls

    Directory of Open Access Journals (Sweden)

    De Melo, A. B.

    2013-12-01

    Full Text Available The regions with lots of shoe production suffer environmental impacts from waste generation during manufacturing of insoles and outsoles. Research conducted in Brazil has demonstrated the technical feasibility to recycle these wastes, especially Ethylene Vinyl Acetate (EVA, as lightweight aggregate, in the production of non-structural cement blocks. This article presents an evaluation of thermal performance with measurements of temperature variation in mini walls (1 m2 built with different materials, including various kinds of EVA block and ceramic bricks. Tests have shown efficient thermal performance for masonry blocks with EVA. These results and supplementary estimates contribute to add value to the EVA block, considering that there are good expectations that the component, with the new geometry proposed, can contribute to the energy efficiency of buildings, highlighting its suitability to most Brazilian bioclimatic regions.Las regiones con una gran producción de calzado sufren impactos ambientales derivados de la generación de residuos durante la producción de plantillas y suelas. Investigaciones realizadas en Brasil han demostrado la viabilidad técnica para el reciclaje de estos residuos, especialmente el Etileno Vinil Acetato (EVA, como agregado ligero en la fabricación de bloques de hormigón no estructurales. Este trabajo presenta una evaluación del rendimiento térmico, con mediciones de la variación de la temperatura en pequeñas paredes (1 m2 construidas con diversos materiales, incluyendo algunos tipos de bloques EVA y ladrillos de cerámica. Las pruebas demostraron actuaciones térmicas eficientes para las muestras con bloques EVA. Estos resultados y cálculos adicionales contribuyen con un aporte de valor añadido al bloque EVA, considerando que existen buenas expectativas del componente, con una nueva propuesta de geometría, pudiendo contribuir a la eficiencia energética de edificios, especialmente por su adecuación a la

  8. Building

    OpenAIRE

    Seavy, Ryan

    2014-01-01

    Building for concrete is temporary. The building of wood and steel stands against the concrete to give form and then gives way, leaving a trace of its existence behind. Concrete is not a building material. One does not build with concrete. One builds for concrete. MARCH

  9. Energy Efficiency and Conservation Block Grant (EECBG): Better Buildings Neighborhood Program Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Donnelly, Kat A.

    2014-01-10

    The Neighbor to Neighbor Energy Challenge (N2N) brought together a consortium of 14 leading clean energy rural, suburban, and low income communities throughout Connecticut. N2N was awarded $4.2 million from the U.S. Department of Energy (DOE) competitive BetterBuildings Neighborhood Program on August 10, 2010 to run a two-year pilot program (plus one year of transition and evaluation) (Award No. EMCBC- 00969-10). N2N tested innovative program models and hypotheses for improving Connecticut’s existing residential energy efficiency programs that are overseen by the ratepayer fund board and administered by CT utilities. N2N’s original goal was to engage 10 percent of households in participating communities to reduce their energy usage by 20 percent through energy upgrades and clean energy measures. N2N planned for customers to complete more comprehensive whole-home energy efficiency and clean energy measures and to achieve broader penetration than existing utility-administered regulated programs. Since this was an ARRA award, we report the following figures on job creation in Table 1. Since N2N is not continuing in its current form, we do not provide figures on job retention. Table 1 N2N Job Creation by Quarter Jobs Created 2010 Q4 6.65 2011 Q1 7.13 2011 Q2 4.98 2011 Q3 9.66 2011 Q4 5.43 2012 Q1 11.11 2012 Q2 6.85 2012 Q3 6.29 2012 Q4 6.77 2013 Q1 5.57 2013 Q2 8.35 2013 Q3 6.52 Total 85.31 The N2N team encountered several gaps in the existing efficiency program performance that hindered meeting N2N’s and DOE’s short-term program goals, as well as the State of Connecticut’s long-term energy, efficiency, and carbon reduction goals. However, despite the slow program start, N2N found evidence of increasing upgrade uptake rates over time, due to delayed customer action of one to two years from N2N introduction to completion of deeper household upgrades. Two main social/behavioral principles have contributed to driving deeper upgrades in CT: 1. Word of mouth

  10. Energy Efficient Improvements of Existing Buildings through Building Envelope Upgrade Case Study of High Rise Block of Flats on 76, Boulevard Partizanski Odredi in Karpos IV, Skopje

    OpenAIRE

    2016-01-01

    AIM: This research examines the important issue of energy efficient improvements to the existing building stock through building envelope upgrade. To facilitate this, the energy performance characteristics of the existing building stock were identified with a view to establishing an existing building stock type, where building envelope upgrades can contribute to a higher level of energy efficiency improvements. The literature review along with the selected building precedents was used to esta...

  11. Active dendrites enhance neuronal dynamic range.

    Directory of Open Access Journals (Sweden)

    Leonardo L Gollo

    2009-06-01

    Full Text Available Since the first experimental evidences of active conductances in dendrites, most neurons have been shown to exhibit dendritic excitability through the expression of a variety of voltage-gated ion channels. However, despite experimental and theoretical efforts undertaken in the past decades, the role of this excitability for some kind of dendritic computation has remained elusive. Here we show that, owing to very general properties of excitable media, the average output of a model of an active dendritic tree is a highly non-linear function of its afferent rate, attaining extremely large dynamic ranges (above 50 dB. Moreover, the model yields double-sigmoid response functions as experimentally observed in retinal ganglion cells. We claim that enhancement of dynamic range is the primary functional role of active dendritic conductances. We predict that neurons with larger dendritic trees should have larger dynamic range and that blocking of active conductances should lead to a decrease in dynamic range.

  12. Structure, adsorption and magnetic properties of chiral metal-organic frameworks bearing linear trinuclear secondary building blocks.

    Science.gov (United States)

    Chen, Zilu; Liu, Xianlin; Zhang, Chuanbing; Zhang, Zhong; Liang, Fupei

    2011-03-07

    The reactions of new chiral organic ligands trimesoyltri(L-alanine) (L-TMTAH(3)) or trimesoyltri(D-alanine) (D-TMTAH(3)) with transition metal salts in the presence of an ancillary ligand of 4,4'-bipyridine gave two pairs of three dimensional frameworks [Co(3)(L-TMTA)(2)(4,4'-bpy)(4)]·28H(2)O (1), [Co(3)(D-TMTA)(2)(4,4'-bpy)(4)]·28H(2)O (2) [Ni(3)(L-TMTA)(2)(4,4'-bpy)(4)]·2C(2)H(5)OH·14H(2)O (3) and [Ni(3)(D-TMTA)(2)(4,4'-bpy)(4)]·2C(2)H(5)OH·14H(2)O (4). These compounds were characterized by elemental analysis, IR, and X-ray powder diffraction analysis and the structures of 1-3 were determined from X-ray single crystal diffraction analysis. Complexes 1-4 feature linear trinuclear secondary building blocks [M(3)(COO)(4)](2+) formed via the connection of three metal ions by four carboxylato groups from four TMTA(3-) ligands. Every adjacent two linear trinuclear secondary building blocks are linked by one and three 4,4'-bipyridine molecules along the a and c axis, respectively, to form two-dimensional sheets, which are further connected by TMTA(3-) ligands to construct a porous three dimensional framework with one-dimensional channels. Compound 3 was taken as an example to investigate the adsorption properties of compounds 1-4. It revealed a saturated hydrogen uptake of 216.6 cm(3) g(-1) (2.0 wt%) at 11.1 atm measured at 77 K, a maximum CO(2) uptake of 119.4 cm(3) g(-1) (23.5 wt%) at 19.5 atm measured at 298 K and a saturated CH(4) uptake of 77.8 cm(3) g(-1) (5.6 wt%) at 27.1 atm measured at 298 K. The magnetic studies of complexes 1 and 3 indicate the presence of antiferromagnetic interactions between the metal ions in the two compounds.

  13. Expedite Protocol for Construction of Chiral Regioselectively N-Protected Monosubstituted Piperazine, 1,4-Diazepane, and 1,4-Diazocane Building Blocks

    DEFF Research Database (Denmark)

    Crestey, François; Witt, Matthias; Jaroszewski, Jerzy W.

    2009-01-01

    This paper describes the first study of solution-phase synthesis of chiral monosubstituted piperazine building blocks from nosylamide-activated aziridines. The protocol, involving aminolysis of the starting aziridines with ω-amino alcohols and subsequent Fukuyama−Mitsunobu cyclization, offers...

  14. Role of Solvent, pH, and Molecular Size in Excited-State Deactivation of Key Eumelanin Building Blocks: Implications for Melanin Pigment Photostability

    DEFF Research Database (Denmark)

    Gauden, M.; Pezzella, A.; Panzella, L.

    2008-01-01

      Ultrafast time-resolved fluorescence spectroscopy has been used to investigate the excited state dynamics of the basic eumelanin building block 5,6-dihydroxyindole-2-carboxylic acid  (DHICA) its acetylated, methylated and carboxylic ester derivatives as well as two oligomers, a dimer and a trim...

  15. Synthesis of a Hoechst 32258 analogue amino acid building block for direct incorporation of a fluorescent, high-affinity DNA binding motif into peptides

    DEFF Research Database (Denmark)

    Behrens, C; Harrit, N; Nielsen, P E

    2001-01-01

    The synthesis of a new versatile "Hoechst 33258-like" Boc-protected amino acid building block for peptide synthesis is described. It is demonstrated that this new ligand is an effective mimic of Hoechst 33258 in terms of DNA affinity and sequence specificity. Furthermore, this minor groove binder...

  16. Caesium fluoride-promoted Stille coupling reaction: an efficient synthesis of 9Z-retinoic acid and its analogues using a practical building block.

    Science.gov (United States)

    Okitsu, Takashi; Iwatsuka, Kinya; Wada, Akimori

    2008-12-21

    A highly efficient and rapid total synthesis of 9Z-retinoic acid was accomplished by caesium fluoride-promoted Stille coupling reaction; using a common building block, 9Z-retinoic acid analogues were also prepared by the same method without isomerisation of the Z-double bond.

  17. A common building block for the syntheses of amorfrutin and cajaninstilbene acid libraries toward efficient binding with peroxisome proliferator-activated receptors.

    Science.gov (United States)

    Aidhen, Indrapal S; Mukkamala, Ramesh; Weidner, Christopher; Sauer, Sascha

    2015-01-16

    A common building block for the synthesis of amorfrutin and cajaninstilbene acid derivatives has been developed. The library of synthesized compounds has enabled identification of new nontoxic ligands of peroxisome proliferator-activated receptors (PPAR) and potential inhibitors of the transcriptional corepressor protein NCoR. The biological data holds promise in identification of new potential leads for the antidiabetic drug discovery process.

  18. Systems thinking in practice: the current status of the six WHO building blocks for health system strengthening in three BHOMA intervention districts of Zambia: a baseline qualitative study.

    Science.gov (United States)

    Mutale, Wilbroad; Bond, Virginia; Mwanamwenge, Margaret Tembo; Mlewa, Susan; Balabanova, Dina; Spicer, Neil; Ayles, Helen

    2013-08-01

    The primary bottleneck to achieving the MDGs in low-income countries is health systems that are too fragile to deliver the volume and quality of services to those in need. Strong and effective health systems are increasingly considered a prerequisite to reducing the disease burden and to achieving the health MDGs. Zambia is one of the countries that are lagging behind in achieving millennium development targets. Several barriers have been identified as hindering the progress towards health related millennium development goals. Designing an intervention that addresses these barriers was crucial and so the Better Health Outcomes through Mentorship (BHOMA) project was designed to address the challenges in the Zambia's MOH using a system wide approach. We applied systems thinking approach to describe the baseline status of the Six WHO building blocks for health system strengthening. A qualitative study was conducted looking at the status of the Six WHO building blocks for health systems strengthening in three BHOMA districts. We conducted Focus group discussions with community members and In-depth Interviews with key informants. Data was analyzed using Nvivo version 9. The study showed that building block specific weaknesses had cross cutting effect in other health system building blocks which is an essential element of systems thinking. Challenges noted in service delivery were linked to human resources, medical supplies, information flow, governance and finance building blocks either directly or indirectly. Several barriers were identified as hindering access to health services by the local communities. These included supply side barriers: Shortage of qualified health workers, bad staff attitude, poor relationships between community and health staff, long waiting time, confidentiality and the gender of health workers. Demand side barriers: Long distance to health facility, cost of transport and cultural practices. Participating communities seemed to lack the capacity

  19. Surface tectonics of nanoporous networks of melamine-capped molecular building blocks formed through interface Schiff-base reactions.

    Science.gov (United States)

    Liu, Xuan-He; Wang, Dong; Wan, Li-Jun

    2013-10-01

    Control over the assembly of molecules on a surface is of great importance for the fabrication of molecule-based miniature devices. Melamine (MA) and molecules with terminal MA units are promising candidates for supramolecular interfacial packing patterning, owing to their multiple hydrogen-bonding sites. Herein, we report the formation of self-assembled structures of MA-capped molecules through a simple on-surface synthetic route. MA terminal groups were successfully fabricated onto rigid molecular cores with 2-fold and 3-fold symmetry through interfacial Schiff-base reactions between MA and aldehyde groups. Sub-molecular scanning tunneling microscopy (STM) imaging of the resultant adlayer revealed the formation of nanoporous networks. Detailed structural analysis indicated that strong hydrogen-bonding interactions between the MA groups persistently drove the formation of nanoporous networks. Herein, we demonstrate that functional groups with strong hydrogen-bond-formation ability are promising building blocks for the guided assembly of nanoporous networks and other hierarchical 2D assemblies. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Could the ethics of institutionalized health care be anything but Kantian? Collecting building blocks for a unifying metaethics.

    Science.gov (United States)

    Kaldis, Byron

    2005-01-01

    Is a Health Care Ethics possible? Against sceptical and relativist doubts Kantian deontology may advance a challenging alternative affirming the possibility of such an ethics on the condition that deontology be adopted as a total programme or complete vision. Kantian deontology is enlisted to move us from an ethics of two-person informal care to one of institutions. It justifies this affirmative answer by occupying a commanding meta-ethical stand. Such a total programme comprises, on the one hand, a dual-aspect strategy incorporating the macro- (institutional) and micro- (person-to-person) levels while, on the other, it integrates consistently within moral epistemology a meta-ethics with lower-ground moral theories. The article describes the issues to be dealt with and the problems which have to be solved on the way to a unifying theory of that kind (Sections I-III) and indicates elements of Kantian moral philosophy which may serve as building blocks (Section IV). Among these are not only Kant's ideas concerning the moral acting of persons and his ideas concerning civil society and state but also his ideas concerning morality, schematism and religion.

  1. CdTe magic-sized clusters and the use as building blocks for assembling two-dimensional nanoplatelets

    Science.gov (United States)

    Xu, Hu; Hou, Yumei; Zhang, Hua

    2017-06-01

    A facile one-pot noninjection synthesis of CdTe magic-sized clusters (MSCs) and their use as building blocks for assembling two-dimensional (2D) quantum confined nanoplatelets (NPLs) are reported. Four distinct MSC families, with the first exciton absorption peaks at 447 nm (F447), 485 nm (F485), 535 nm (F535), and 555 nm (F555), are synthesized by the reaction between cadmium oleate and trioctylphosphine tellurium (TOP-Te) in octadecene media containing primary amine and TOP at appropriate intermediate temperatures. Especially, F447 is obtained in pure form and can self-assemble in situ into 2D NPLs in the reaction solution. The formation, growth, and transformation of CdTe MSCs are monitored mainly by UV-Vis absorption spectroscopy. The pure F447 and its assembled 2D NPLs are further characterized using transmission electron microscopy. The influence of various experimental variables, including reaction temperature, the nature, and amount of capping ligands, on the stability and growth kinetics of the obtained MSC families has been systematically investigated. Experimental results indicate that the appropriate reaction temperature and the presence of long hydrocarbon chain primary amines play a crucial role in the formation of MSCs and the subsequent assembly into 2D NPLs. Primary amines can also promote ultra-small sized CdTe regular nanocrystals to transform into MSCs, and therefore, CdTe MSCs can be obtained indirectly from regularly sized nanocrystals. [Figure not available: see fulltext.

  2. A 50/50 electronic beam splitter in graphene nanoribbons as a building block for electron optics

    Science.gov (United States)

    Lima, Leandro R. F.; Hernández, Alexis R.; Pinheiro, Felipe A.; Lewenkopf, Caio

    2016-12-01

    Based on the investigation of the multi-terminal conductance of a system composed of two graphene nanoribbons, in which one is on top of the other and rotated by {{60}\\circ} , we propose a setup for a 50/50 electronic beam splitter that neither requires large magnetic fields nor ultra low temperatures. Our findings are based on an atomistic tight-binding description of the system and on the Green function method to compute the Landauer conductance. We demonstrate that this system acts as a perfect 50/50 electronic beam splitter, in which its operation can be switched on and off by varying the doping (Fermi energy). We show that this device is robust against thermal fluctuations and long range disorder, as zigzag valley chiral states of the nanoribbons are protected against backscattering. We suggest that the proposed device can be applied as the fundamental element of the Hong-Ou-Mandel interferometer, as well as a building block of many devices in electron optics.

  3. Controlled loading of building blocks into temporary self-assembled scaffolds for directed assembly of organic nanostructures.

    Science.gov (United States)

    Banner, L Todd; Danila, Delia C; Sharpe, Katie; Durkin, Melissa; Clayton, Benjamin; Anderson, Ben; Richter, Andrew; Pinkhassik, Eugene

    2008-10-21

    Using temporary self-assembled scaffolds to preorganize building blocks is a potentially powerful method for the synthesis of organic nanostructures with programmed shapes. We examined the underlying phenomena governing the loading of hydrophobic monomers into lipid bilayer interior and demonstrated successful control of the amount and ratio of loaded monomers. When excess styrene derivatives or acrylates were added to the aqueous solution of unilamellar liposomes made from saturated phospholipids, most loading occurs within the first few hours. Dynamic light scattering and transmission electron microscopy revealed no evidence of aggregation caused by monomers. Bilayers appeared to have a certain capacity for accommodating monomers. The total volume of loaded monomers is independent of monomer structure. X-ray scattering showed the increase in bilayer thickness consistent with loading monomers into bilayer interior. Loading kinetics is inversely proportional to the hydrophobicity and size of monomers. Loading and extraction kinetic data suggest that crossing the polar heads region is the rate limiting step. Consideration of loading kinetics and multiple equilibria are important for achieving reproducible monomer loading. The total amount of monomers loaded into the bilayer can be controlled by the loading time or length of hydrophobic lipid tails. The ratio of loaded monomers can be varied by changing the ratio of monomers used for loading or by the time-controlled replacement of a preloaded monomer. Understanding and controlling the loading of monomers into bilayers contributes to the directed assembly of organic nanostructures.

  4. Using the fingerprints of solar magnetic reconnection to identify the elemental building blocks of the slow solar wind

    Science.gov (United States)

    Kepko, Larry; Viall, Nicholeen M.; Kasper, Justin; Lepri, Sue

    2015-04-01

    While the source of the fast solar wind is well understood to be linked to coronal holes, the source of the slow solar wind has remained elusive. Many previous studies of the slow solar wind have examined trends in the composition and charge states over long time scales and found strong relationships between the solar wind velocity and these plasma parameters. These relationships have been used to constrain models of solar wind source and acceleration. In this study, we take advantage of high time resolution (12 min) measurements of solar wind composition and charge-state abundances recently reprocessed by the ACE Solar Wind Ion Composition Spectrometer (SWICS) science team to probe the timescales of solar wind variability at relatively small scales. We study an interval of slow solar wind containing quasi-periodic 90 minute structures and show that they are remnants of solar magnetic reconnection. Each 90-minute parcel of slow solar wind, though the speed remains steady, exhibits the complete range of charge state and composition variations expected for the entire range of slow solar wind, which is repeated again in the next 90-minute interval. These observations show that previous statistical results break down on these shorter timescales, and impose new and important constraints on models of slow solar wind creation. We conclude by suggesting these structures were created through interchange magnetic reconnection and form elemental building blocks of the slow solar wind. We also discuss the necessity of decoupling separately the process(es) responsible for the release and acceleration.

  5. Threaded molecular wires as building blocks for advanced polymer blends: WPLEDs, ultra-broadband optical amplifiers, multi color lasers

    Science.gov (United States)

    Brovelli, Sergio; Mroz, Marta; Sforazzini, Giuseppe; Virgili, Tersilla; Meinardi, Franco; Paleari, Alberto; Anderson, Harry L.; Lanzani, Guglielmo; Cacialli, Franco

    2011-03-01

    The ability to produce semiconducting polymer blends with white emission spectra, large emission cross sections and broad optical gain is critical to their application in white PLEDs, lasers and broadband amplifiers. Cyclodextrin-encapsulation is an effective means of suppressing detrimental intermolecular interactions, and energy transfer (ET) channels in polymer blends, thus enabling fabrication of white-PLEDs. We show that all such properties combine into a high impact photonic application: ultra-broad optical gain and two-color lasing in a binary polyrotaxane blend. We study the ultrafast photophysics of a blend of a conventional and an encapsulated polyfluorene. The morphology is investigated by microRaman imaging, AFM, and fluorescence lifetime microscopy. We ascribe the ultra-broad optical gain (>850 meV), and the simultaneous ASE for both constituents, to the dual effect of reduced polaron formation and suppressed ET. Our results demonstrate that polyrotaxanes could realistically represent the building blocks for advanced polymer blends with highly controlled optical properties, for applications in solid state lightning, lasers and photovoltaic technologies.

  6. Total synthesis of woodrosin I--part 1: preparation of the building blocks and evaluation of the glycosylation strategy.

    Science.gov (United States)

    Fürstner, Alois; Jeanjean, Fabien; Razon, Patrick; Wirtz, Conny; Mynott, Richard

    2003-01-03

    The preparation of three building blocks required for the total synthesis of woodrosin I (1) is outlined, a complex resin glycoside bearing a macrolide ring which spans four of the five sugars of its oligosaccharide backbone. Key steps involve the enantioselective, titanium-catalyzed addition of dipentylzinc to 5-hexenal, the glycosylation of the resulting alcohol 18 with the glucose-derived trichloroacetimidate 7, and further elaboration of the resulting product 19 into disaccharide 22 on treatment with the orthogonally protected glycosyl donor 15. The trichloroacetimidate method is also used for the formation of the second synthon represented by disaccharide 38. A model study shows that the assembly of the pentasaccharidic perimeter of 1 depends critically on the phasing of the glycosylation events between fragments 22, 38 and the rhamnosyl donor 27 due to the severe steric hindrance in the product. A particularly noteworthy finding is the fact that diol 22 can be regioselectively glycosylated at the 3'-OH group in high yield without protection of the neighboring 2'-OH function.

  7. Hexakis(4-iodophenyl)-peri-hexabenzocoronene- a versatile building block for highly ordered discotic liquid crystalline materials.

    Science.gov (United States)

    Wu, Jishan; Watson, Mark D; Zhang, Li; Wang, Zhaohui; Müllen, Klaus

    2004-01-14

    Hexakis (4-iodophenyl)-peri-hexabenzocoronene (5), a novel functionalizable mesogenic building block, was prepared by rational multistep synthesis. Although sparingly soluble in common solvents, it can be obtained in pure form and then functionalized via Hagihara-Sonogashira coupling to give a series of highly ordered columnar liquid crystalline molecules 14a-c. The total synthesis involves five 6-fold transformations, all in excellent to near quantitative isolated yields. Their thermotropic liquid crystalline behavior was studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and wide-angle X-ray diffraction (WAXD). Compared to the normal alkyl-subsituted hexabenzocoronenes (HBCs), 14a-c exhibit more highly ordered columnar mesophases, including three-dimensionally ordered superstructures (helical columnar mesophase). These could arise from additional intracolumnar pi-pi interactions between, and space-filling requirements introduced by, the rigid-rod side groups. Atomic force microscopy (AFM) revealed self-assembled bundles of columnar aggregates in spin-coated films and isolated several-micron-long nanoribbons composed of a defined number of columns in drop cast films.

  8. Nanoparticle building blocks

    Directory of Open Access Journals (Sweden)

    Vincent M. Rotello

    2001-11-01

    Full Text Available Monolayer-protected clusters (MPCs and mixed monolayer-protected clusters (MMPCs2 provide crucial tools for bridging the gap between ‘bottomup’ synthetic methods and ‘top-down’ fabrication. MPCs are core-shell type systems that feature a metallic or semiconductor core functionalized with a self-assembled monolayer (SAM. This monolayer provides two key functions. Firstly preventing core-core contact that would lead to agglomeration and secondly providing a structured environment for the attachment of functional molecular entities, including devices and sensors. MMPCs feature multiple functionality on the shell monolayer, greatly extending the versatility of these core-shell systems.

  9. Relationship Building Blocks

    Science.gov (United States)

    Santabarbara, Todd; Erbe, Ryan; Cooper, Scott

    2009-01-01

    Intimate or romantic relationships for young people today play an integral role in their health and quality of life. Between the ages of 11 and 13 students become more interested in the opposite sex and as a result they begin to develop more intimate relationships. Around this age students are learning to deal with these feelings of attraction and…

  10. Analysis of the influence of the block in the dynamic properties of domestic buildings with masonry structure

    OpenAIRE

    Vázquez Vicente, Enrique; Sánchez Sánchez, José; Rodríguez León, María Teresa

    2015-01-01

    Congreso celebrado en la Escuela de Arquitectura de la Universidad de Sevilla desde el 24 hasta el 26 de junio de 2015. The modal analysis of a building, performed by finite element method, is usually made in a building isolated model. In the case of traditional buildings with masonry structure, this simplification can be very unrealistic, particularly in the case of buildings with shared party walls. The influence of the adjacent buildings, in the modal results of domestic masonry buildin...

  11. STRUCTURAL SOLUTIONS AND SPECIAL FEATURES OF THE THERMAL PROTECTION ANALYSIS OF EXTERIOR WALLS OF BUILDINGS MADE OF AUTOCLAVED GAS-CONCRETE BLOCKS

    Directory of Open Access Journals (Sweden)

    Bedov Anatolij Ivanovich

    2012-10-01

    Full Text Available Relevant structural solutions, physical and mechanical characteristics, coefficients of thermal conductivity for exterior masonry walls made of autoclaved gas-concrete blocks are provided in the article. If a single-layer wall is under consideration, an autoclaved gas-concrete block is capable of performing the two principal functions of a shell structure, including the function of thermal protection and the bearing function. The functions are performed simultaneously. Therefore, the application of the above masonry material means the design development and erection of exterior walls of residential buildings noteworthy for their thermal efficiency. In the event of frameless structures, the height of the residential building in question may be up to 5 stories, while the use of a monolithic or a ready-made frame makes it possible to build high-rise buildings, and the number of stories is not limited in this case. If the average block density is equal to 400…500 kilograms per cubic meter, the designed wall thickness is to be equal to 400 mm. Its thermal resistance may be lower than the one set in the event of the per-element design of the thermal protection (Rreq = 3.41 м2 C/Watt, in Ufa, although it will meet the requirements of the applicable regulations if per-unit power consumption rate is considered.

  12. Convectively coupled equatorial waves within the MJO during CINDY/DYNAMO: slow Kelvin waves as building blocks

    Science.gov (United States)

    Kikuchi, Kazuyoshi; Kiladis, George N.; Dias, Juliana; Nasuno, Tomoe

    2017-08-01

    This study examines the relationship between the MJO and convectively coupled equatorial waves (CCEWs) during the CINDY2011/DYNAMO field campaign using satellite-borne infrared radiation data, in order to better understand the interaction between convection and the large-scale circulation. The spatio-temporal wavelet transform (STWT) enables us to document the convective signals within the MJO envelope in terms of CCEWs in great detail, through localization of space-time spectra at any given location and time. Three MJO events that occurred in October, November, and December 2011 are examined. It is, in general, difficult to find universal relationships between the MJO and CCEWs, implying that MJOs are diverse in terms of the types of disturbances that make up its convective envelope. However, it is found in all MJO events that the major convective body of the MJO is made up mainly by slow convectively coupled Kelvin waves. These Kelvin waves have relatively fast phase speeds of 10-13 m s-1 outside of, and slow phase speeds of 8-9 m s-1 within the MJO. Sometimes even slower eastward propagating signals with 3-5 m s-1 phase speed show up within the MJO, which, as well as the slow Kelvin waves, appear to comprise major building blocks of the MJO. It is also suggested that these eastward propagating waves often occur coincident with n = 1 WIG waves, which is consistent with the schematic model from Nakazawa in 1988. Some practical aspects that facilitate use of the STWT are also elaborated upon and discussed.

  13. Solution processable colloidal nanoplates as building blocks for high-performance electronic thin films on flexible substrates.

    Science.gov (United States)

    Lin, Zhaoyang; Chen, Yu; Yin, Anxiang; He, Qiyuan; Huang, Xiaoqing; Xu, Yuxi; Liu, Yuan; Zhong, Xing; Huang, Yu; Duan, Xiangfeng

    2014-11-12

    Low-temperature solution-processed electronic materials on plastic substrates are of considerable interest for flexible electronics. Solution dispersible inorganic nanostructures (e.g., zero-dimensional (0D) quantum dots or one-dimensional (1D) nanowires) have emerged as interesting ink materials for low-temperature solution processing of electronic thin films on flexible substrates, but usually with limited performance due to the large number of grain boundaries (0D) or incomplete surface coverage (1D). Here, we report two-dimensional (2D) colloidal nanoplates of layered materials as a new ink material for solution assembly of high-performance electronic thin films. The 2D colloidal nanoplates exhibit few dangling bonds and represent an ideal geometry for the assembly of highly uniform continuous thin films with greatly reduced grain boundaries dictated by large-area conformal plane-plane contact with atomically flat/clean interfaces. It can therefore promise efficient charge transport across neighboring nanoplates and throughout the entire thin film to enable unprecedented electronic performance. We show that Bi2Se3 and Bi2Te3 nanoplates can be synthesized with well-controlled thickness (6-15 nm) and lateral dimension (0.5-3 μm) and can be used for the assembly of highly uniform continuous thin films with a full surface coverage and an excellent room temperature carrier mobility >100 cm(2)·V(-1)·s(-1), approaching that of chemical vapor deposition grown materials. Our study demonstrates a general strategy to using 2D nanoplates as a unique building block for the construction of high-performance electronic thin films on plastic substrates for future flexible electronics and optoelectronics.

  14. Social cognition: empirical contribution. The developmental building blocks of psychopathic traits: revisiting the role of theory of mind.

    Science.gov (United States)

    Sharp, Carla; Vanwoerden, Salome

    2014-02-01

    In the context of personality disorder development, theories of typical and atypical development both emphasize social cognition as an important building block for personality development. Prior claims of intact theory of mind (ToM) abilities in psychopathic individuals have relied upon a narrow conception of ToM as equivalent to "cognitive empathy." In this article, the authors make use of a broader conception of ToM comprising top-down and bottom-up processing, as well as the fractionation of ToM in terms of reduced or excessive ToM function, to examine relationships between ToM and psychopathic traits. A total of 342 adolescents (ages 12-17; Mage 15.39; SD = 1.45; 61.5% females) completed the Movie Assessment for Social Cognition (Dziobek, Fleck, Kalbe, et al., 2006) and the Child Eyes Test (Baron-Cohen, Wheelwright, Hill, Raste, & Plumb, 2001) in addition to three measures of psychopathic traits. Results demonstrated unique relations between the affective components of psychopathy (callous-unemotional traits [CU traits]) and impairment in both top-down and bottom-up ToM. In addition, excessive ToM related to affective components of psychopathy, while reduced or no ToM related to behavioral components of psychopathy. In mediational analyses, bottom-up ToM was shown to be necessary for top-town ToM in its relation with CU traits. Taken together, these results from the study lend support to revisiting the link between ToM and psychopathy.

  15. Selective nickel-catalyzed conversion of model and lignin-derived phenolic compounds to cyclohexanone-based polymer building blocks.

    Science.gov (United States)

    Schutyser, Wouter; Van den Bosch, Sander; Dijkmans, Jan; Turner, Stuart; Meledina, Maria; Van Tendeloo, Gustaaf; Debecker, Damien P; Sels, Bert F

    2015-05-22

    Valorization of lignin is essential for the economics of future lignocellulosic biorefineries. Lignin is converted into novel polymer building blocks through four steps: catalytic hydroprocessing of softwood to form 4-alkylguaiacols, their conversion into 4-alkylcyclohexanols, followed by dehydrogenation to form cyclohexanones, and Baeyer-Villiger oxidation to give caprolactones. The formation of alkylated cyclohexanols is one of the most difficult steps in the series. A liquid-phase process in the presence of nickel on CeO2 or ZrO2 catalysts is demonstrated herein to give the highest cyclohexanol yields. The catalytic reaction with 4-alkylguaiacols follows two parallel pathways with comparable rates: 1) ring hydrogenation with the formation of the corresponding alkylated 2-methoxycyclohexanol, and 2) demethoxylation to form 4-alkylphenol. Although subsequent phenol to cyclohexanol conversion is fast, the rate is limited for the removal of the methoxy group from 2-methoxycyclohexanol. Overall, this last reaction is the rate-limiting step and requires a sufficient temperature (>250 °C) to overcome the energy barrier. Substrate reactivity (with respect to the type of alkyl chain) and details of the catalyst properties (nickel loading and nickel particle size) on the reaction rates are reported in detail for the Ni/CeO2 catalyst. The best Ni/CeO2 catalyst reaches 4-alkylcyclohexanol yields over 80 %, is even able to convert real softwood-derived guaiacol mixtures and can be reused in subsequent experiments. A proof of principle of the projected cascade conversion of lignocellulose feedstock entirely into caprolactone is demonstrated by using Cu/ZrO2 for the dehydrogenation step to produce the resultant cyclohexanones (≈80 %) and tin-containing beta zeolite to form 4-alkyl-ε-caprolactones in high yields, according to a Baeyer-Villiger-type oxidation with H2 O2 .

  16. The Bacillus BioBrick Box: generation and evaluation of essential genetic building blocks for standardized work with Bacillus subtilis.

    Science.gov (United States)

    Radeck, Jara; Kraft, Korinna; Bartels, Julia; Cikovic, Tamara; Dürr, Franziska; Emenegger, Jennifer; Kelterborn, Simon; Sauer, Christopher; Fritz, Georg; Gebhard, Susanne; Mascher, Thorsten

    2013-12-02

    Standardized and well-characterized genetic building blocks are a prerequisite for the convenient and reproducible assembly of novel genetic modules and devices. While numerous standardized parts exist for Escherichia coli, such tools are still missing for the Gram-positive model organism Bacillus subtilis. The goal of this study was to develop and thoroughly evaluate such a genetic toolbox. We developed five BioBrick-compatible integrative B. subtilis vectors by deleting unnecessary parts and removing forbidden restriction sites to allow cloning in BioBrick (RFC10) standard. Three empty backbone vectors with compatible resistance markers and integration sites were generated, allowing the stable chromosomal integration and combination of up to three different devices in one strain. In addition, two integrative reporter vectors, based on the lacZ and luxABCDE cassettes, were BioBrick-adjusted, to enable β-galactosidase and luciferase reporter assays, respectively. Four constitutive and two inducible promoters were thoroughly characterized by quantitative, time-resolved measurements. Together, these promoters cover a range of more than three orders of magnitude in promoter strength, thereby allowing a fine-tuned adjustment of cellular protein amounts. Finally, the Bacillus BioBrick Box also provides five widely used epitope tags (FLAG, His10, cMyc, HA, StrepII), which can be translationally fused N- or C-terminally to any protein of choice. Our genetic toolbox contains three compatible empty integration vectors, two reporter vectors and a set of six promoters, two of them inducible. Furthermore, five different epitope tags offer convenient protein handling and detection. All parts adhere to the BioBrick standard and hence enable standardized work with B. subtilis. We believe that our well-documented and carefully evaluated Bacillus BioBrick Box represents a very useful genetic tool kit, not only for the iGEM competition but any other BioBrick-based project in B

  17. Evolutionary Origin and Conserved Structural Building Blocks of Riboswitches and Ribosomal RNAs: Riboswitches as Probable Target Sites for Aminoglycosides Interaction

    Directory of Open Access Journals (Sweden)

    Elnaz Mehdizadeh Aghdam

    2014-05-01

    Full Text Available Purpose: Riboswitches, as noncoding RNA sequences, control gene expression through direct ligand binding. Sporadic reports on the structural relation of riboswitches with ribosomal RNAs (rRNA, raises an interest in possible similarity between riboswitches and rRNAs evolutionary origins. Since aminoglycoside antibiotics affect microbial cells through binding to functional sites of the bacterial rRNA, finding any conformational and functional relation between riboswitches/rRNAs is utmost important in both of medicinal and basic research. Methods: Analysis of the riboswitches structures were carried out using bioinformatics and computational tools. The possible functional similarity of riboswitches with rRNAs was evaluated based on the affinity of paromomycin antibiotic (targeting “A site” of 16S rRNA to riboswitches via docking method. Results: There was high structural similarity between riboswitches and rRNAs, but not any particular sequence based similarity between them was found. The building blocks including "hairpin loop containing UUU", "peptidyl transferase center conserved hairpin A loop"," helix 45" and "S2 (G8 hairpin" as high identical rRNA motifs were detected in all kinds of riboswitches. Surprisingly, binding energies of paromomycin with different riboswitches are considerably better than the binding energy of paromomycin with “16S rRNA A site”. Therefore the high affinity of paromomycin to bind riboswitches in comparison with rRNA “A site” suggests a new insight about riboswitches as possible targets for aminoglycoside antibiotics. Conclusion: These findings are considered as a possible supporting evidence for evolutionary origin of riboswitches/rRNAs and also their role in the exertion of antibiotics effects to design new drugs based on the concomitant effects via rRNA/riboswitches.

  18. Building blocks for actively-aligned micro-optical systems in rapid prototyping and small series production

    Science.gov (United States)

    Böttger, Gunnar; Queisser, Marco; Arndt-Staufenbiel, Norbert; Schröder, Henning; Lang, K.-D.

    2015-03-01

    In recent years there has been considerable progress in utilizing fully automated machines for the assembly of microoptical systems. Such systems integrate laser sources, optical elements and detectors into tight packages, and efficiently couple light to free space beams, waveguides in optical backplanes, or optical fibers for longer reach transmission. The required electrical-optical and optical components are placed and aligned actively in more than one respect. For one, all active components are actually operated in the alignment process, and, more importantly, the placing of all components is controlled actively by camera systems and power detectors with live feedback for an optimal coupling efficiency. The total number of optical components typically is in the range of 5 to 50, whereas the number of actors with gripping tools for the actual handling and aligning is limited, with little flexibility in the gripping width. The assembly process therefore is strictly sequential and, given that an automated tool changing has not been established in this class of machines yet, there are either limitations in the geometries of components that may be used, or time-consuming interaction by human operators is needed. As a solution we propose and present lasered glass building blocks with standardized gripping geometries that enclose optical elements of various shapes and functionalities. These are cut as free form geometries with green short pulse and CO2 lasers. What seems to add cost at first rather increases freedom of design and adds an economical flexibility to create very hybrid assemblies of various micro-optical assemblies also in small numbers.

  19. The virion host shutoff protein of herpes simplex virus 1 blocks the replication-independent activation of NF-κB in dendritic cells in the absence of type I interferon signaling.

    Science.gov (United States)

    Cotter, Christopher R; Kim, Won-keun; Nguyen, Marie L; Yount, Jacob S; López, Carolina B; Blaho, John A; Moran, Thomas M

    2011-12-01

    Immune evasion is a defining feature of the virus-host relationship. During infection, herpes simplex virus type 1 (HSV-1) utilizes multiple proteins to manipulate the host immune response. In the present study, we investigated the mechanism by which the virion host shutoff (vhs) protein blocks the activation of dendritic cells (DCs). Previously, we found that coinfection of wild-type HSV-1 with a panel of RNA viruses resulted in a block to DC activation that was attributable to vhs. These observations led us to hypothesize that the vhs-mediated inhibition was dependent on signaling through the RIG-I-like receptor (RLR) signaling pathway. By examining DCs generated from MAVS (IPS-1) knockout (KO) mice, we determined that RLR/MAVS signaling is not essential for the DC response to HSV-1. We also evaluated the requirement for the type I interferon (IFN) signaling pathway in DC activation following infection with HSV-1 and found that stimulation of DCs with wild-type HSV-1 required intact type I IFN signaling for the production of cytokines, whereas the vhs deletion (vhs(-)) mutant virus activated DCs without the need for exogenous IFN signaling. Comparisons of transcription factor activation in DCs infected with wild-type HSV and the vhs(-) mutant virus revealed that NF-κB activation was inhibited by vhs in the early phase of the infection. In contrast, IRF3 activation was not influenced by vhs. In these studies, measurement of proinflammatory cytokines and type I IFN release from the infected DCs reflected the activation status of these transcription factors. Taken together, the work presented here (i) describes a novel role for the vhs protein as an inhibitor of the early activation of NF-κB during HSV-1 infection of DCs and (ii) offers a mechanistic explanation of how this protein interferes with DC activation.

  20. Mesoporous Bragg reflectors: block-copolymer self-assembly leads to building blocks with well defined continuous pores and high control over optical properties

    KAUST Repository

    Guldin, S.

    2011-08-19

    Mesoporous distributed Bragg re ectors (MDBRs) exhibit porosity on the sub-optical length scale. This makes them ideally suited as sensing platforms in biology and chemistry as well as for light management in optoelectronic devices. Here we present a new fast forward route for the fabrication of MDBRs which relies on the self-assembling properties of the block copolymer poly(isoprene-block -ethylene oxide) (PI-b -PEO) in combination with sol-gel chemistry. The interplay between structure directing organic host and co-assembled inorganic guest allows the ne tuning of refractive index in the outcome material. The refractive index dierence between the high and low porosity layer can be as high as 0.4, with the optical interfaces being well dened. Following a 30 min annealing protocol after each layer deposition enables the fast and reliable stacking of MDBRs which exhibit a continuous TiO2 network with large accessible pores and high optical quality.

  1. Structural modulation of Cd(Ⅱ) supramolecular frameworks with a versatile 2,4-dipyridyl-type building block and different dicarboxylate ligands

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    A series of Cd(Ⅱ) coordination complexes with an elongated 2,4-dipyridyl-type building block trans-1-(2-pyridyl)-2-(4-pyridyl)ethylene (bpe) and different dicarboxylate ligands have been presented. Generally, bpe shows the unidentate coordination mode and serves as the terminal pendant, whereas the dicarboxylate ligands display various binding fashions to interlink the metal centers to form 1-D comb-like chain, ribbon, and fishbone arrays, as well as 2-D 44 and 4.82 layered networks. Notably, the bpe building block is also involved in secondary interactions such as hydrogen bonding and aromatic stacking to construct the resulting supramolecular architectures. Thermal stability of these complexes has been studied by TG-DTA technique.

  2. Structural modulation of Cd(Ⅱ) supramolecular frameworks with a versatile 2,4-dipyridyl-type building block and different dicarboxylate ligands

    Institute of Scientific and Technical Information of China (English)

    LI ChengPeng; YU Qian; DU Miao

    2009-01-01

    A series of Cd(Ⅱ) coordination complexes with an elongated 2,4-dipyridyl-type building block trans-1-(2-pyridyl)-2-(4-pyridyl)ethylene (bpe) and different dicarboxylate ligands have been presented.Generally,bpe shows the unidentate coordination mode and serves as the terminal pendant,whereas the dicarboxylate Iigands display various binding fashions to interlink the metal centers to form 1-D comb-like chain,ribbon,and fishbone arrays,as well as 2-D 44 and 4.82 layered networks.Notably,the bpe building block is also involved in secondary interactions such as hydrogen bonding and aromatic stacking to construct the resulting supramolecular architectures.Thermal stability of these complexes has been studied by TG-DTA technique.

  3. Syntheses and physical characterization of new aliphatic triblock poly(L-lactide-b-butylene succinate-b-L-lactide)s bearing soft and hard biodegradable building blocks.

    Science.gov (United States)

    Ba, Chaoyi; Yang, Jing; Hao, Qinghui; Liu, Xiaoyun; Cao, Amin

    2003-01-01

    This study presents chemical syntheses and physical characterization of a new aliphatic poly(L-lactide-b-butylene succinate-b-L-lactide) triblock copolyester with soft and hard biodegradable building blocks. First, poly(butylene succinate) (PBS) prepolymers terminated with hydroxyl functional groups were synthesized through melt polycondensation from succinic acid and 1,4-butanediol. Further, a series of new PLLA-b-PBS-b-PLLA triblock copolyesters bearing various average PLLA block lengths were prepared via ring opening polymerization of L-lactide with the synthesized hydroxyl capped PBS prepolymer (Mn = 4.9 KDa) and stannous octanoate as the macroinitiator and catalyst, respectively. By means of GPC, NMR, FTIR, DSC, TGA, and wide-angle X-ray diffractometer (WAXD), the macromolecular structures and physical properties were intensively studied for these synthesized PBS prepolymer and PLLA-b-PBS-b-PLLA triblock copolyesters. 13C NMR and GPC experimental results confirmed the formation of sequential block structures without any detectable transesterification under the present experimental conditions, and the molecular weights of triblock copolyesters could be readily regulated by adjusting the feeding molar ratio of L-lactide monomer to the PBS macroinitiator. DSC measurements showed all single glass transitions, and their glass transition temperatures were found to be between those of PLLA and PBS, depending on the lengths of PLLA blocks. It was noteworthy that the segmental flexibilities of the hard PLLA blocks were found to be remarkably enhanced by the more flexible PBS block partner, and the PBS and PLLA building blocks were well mixed in the amorphous regions. Results of TGA analyses indicated that thermal degradation and stabilities of the PLLA blocks strongly depended on the average PLLA block lengths of triblock copolyesters. In addition, FTIR and WAXD results showed the coexistence of the assembled PLLA and PBS crystal structures when the average PLLA block

  4. Microwave assisted regioselective synthesis and 2D-NMR studies of novel azoles and azoloazines utilizing fluorine-containing building blocks

    Science.gov (United States)

    Al-Bogami, Abdullah S.; Saleh, Tamer S.; Mekky, Ahmed E. M.; Shaaban, Mohamed R.

    2016-10-01

    An efficient regioselective synthesis of novel azoles containing a trifluoromethyl moiety via the 1,3-dipolar cycloaddition reaction under microwave irradiation, using fluorine-containing building blocks methodology was achieved. Furthermore, these novel azoles scaffolds have been employed as the starting material in the synthesis of new azoloazines containing a trifluoromethyl group. An unambiguous structural assignment of the obtained regioisomers was determined using the 2D HMBC NMR techniques as a valuable tool.

  5. A Thieno[3,2-b][1]benzothiophene Isoindigo Building Block for Additive- and Annealing-Free High-Performance Polymer Solar Cells

    KAUST Repository

    Yue, Wan

    2015-08-20

    A novel photoactive polymer with two different molecular weights is reported, based on a new building block: thieno[3,2-b][1]benzothiophene isoindigo. Due to the improved crystallinity, optimal blend morphology, and higher charge mobility, solar-cell devices of the high-molecular-weight polymer exhibit a superior performance, affording efficiencies of 9.1% without the need for additives, annealing, or additional extraction layers during device fabrication.

  6. Asymmetric dihydroxylations of enynes with a trisubstituted C═C bond. An unprecedented route to γ-lactone building blocks with a quaternary stereocenter.

    Science.gov (United States)

    Burghart-Stoll, Heike; Kapferer, Tobias; Brückner, Reinhard

    2011-03-04

    En route to a comprehensive set of hydroxylactone building blocks (4R,5R)-, (4R,5S)-, (4S,5R)-, and (4S,5S)-5a, Sharpless asymmetric dihydroxylations of allylic chlorides (E)- and (Z)-9 were performed. They delivered the four stereoisomers of diol 10 with up to 92% ee and absolute configurations, which were proven to be in accordance with the Sharpless mnemonic.

  7. Synthesis of a selectively protected trisaccharide building block of the capsular polysaccharide of Streptococcus pneumoniae types 6A and 6B

    NARCIS (Netherlands)

    Vliegenthart, J.F.G.; Slaghek, T.M.; Vliet, M.J. van; Maas, A.A.M.; Kamerling, J.P.

    1989-01-01

    4-Methoxybenzyl 2,4-di-O-benzyl-3-O-[2,4,6-tri-O-benzyl-3-O-(3,4,6-tri-O-benzyl-α-D-galactopyranosyl)-α-D- glucopyranosyl]-α-L-rhamnopyranoside (22), a building block for the α-D-Galp-(1->3)-α-D-Glcp-(1->3)-α-L-Rhap fragment of the capsular polysaccharides of Streptococcus pneumoniae types 6A and 6B

  8. C–H arylation of unsubstituted furan and thiophene with acceptor bromides: access to donor–acceptor–donor-type building blocks for organic electronics.

    Science.gov (United States)

    Matsidik, Rukiya; Martin, Johannes; Schmidt, Simon; Obermayer, Johannes; Lombeck, Florian; Nübling, Fritz; Komber, Hartmut; Fazzi, Daniele; Sommer, Michael

    2015-01-16

    Pd-catalyzed direct arylation (DA) reaction conditions have been established for unsubstituted furan (Fu) and thiophene (Th) with three popular acceptor building blocks to be used in materials for organic electronics, namely 4,7-dibromo-2,1,3-benzothiadiazole (BTBr2), N,N′-dialkylated 2,6-dibromonaphthalene-1,4,5,8-bis(dicarboximide) (NDIBr2), and 1,4-dibromotetrafluorobenzene (F4Br2). Reactions with BTBr2, F4Br2, and NDIBr2 require different solvents to obtain high yields. The use of dimethylacetamide (DMAc) is essential for the successful coupling of BTBr2 and F4Br2, but detrimental for NDIBr2, as the electron-deficient NDI core is prone to nucleophilic core substitution in DMAc as solvent but not in toluene. NDIFu2 is much more planar compared to NDITh2, resulting in an enhanced charge-transfer character, which makes it an interesting building block for conjugated systems designed for organic electronics. This study highlights direct arylation as a simple and inexpensive method to construct a series of important donor–acceptor–donor building blocks to be further used for the preparation of a variety of conjugated materials.

  9. Building blocks for the development of an interface for high-throughput thin layer chromatography/ambient mass spectrometric analysis: a green methodology.

    Science.gov (United States)

    Cheng, Sy-Chyi; Huang, Min-Zong; Wu, Li-Chieh; Chou, Chih-Chiang; Cheng, Chu-Nian; Jhang, Siou-Sian; Shiea, Jentaie

    2012-07-17

    Interfacing thin layer chromatography (TLC) with ambient mass spectrometry (AMS) has been an important area of analytical chemistry because of its capability to rapidly separate and characterize the chemical compounds. In this study, we have developed a high-throughput TLC-AMS system using building blocks to deal, deliver, and collect the TLC plate through an electrospray-assisted laser desorption ionization (ELDI) source. This is the first demonstration of the use of building blocks to construct and test the TLC-MS interfacing system. With the advantages of being readily available, cheap, reusable, and extremely easy to modify without consuming any material or reagent, the use of building blocks to develop the TLC-AMS interface is undoubtedly a green methodology. The TLC plate delivery system consists of a storage box, plate dealing component, conveyer, light sensor, and plate collecting box. During a TLC-AMS analysis, the TLC plate was sent to the conveyer from a stack of TLC plates placed in the storage box. As the TLC plate passed through the ELDI source, the chemical compounds separated on the plate would be desorbed by laser desorption and subsequently postionized by electrospray ionization. The samples, including a mixture of synthetic dyes and extracts of pharmaceutical drugs, were analyzed to demonstrate the capability of this TLC-ELDI/MS system for high-throughput analysis.

  10. Intrinsic Folding Proclivities in Cyclic β-Peptide Building Blocks: Configuration and Heteroatom Effects Analyzed by Conformer-Selective Spectroscopy and Quantum Chemistry.

    Science.gov (United States)

    Alauddin, Mohammad; Gloaguen, Eric; Brenner, Valérie; Tardivel, Benjamin; Mons, Michel; Zehnacker-Rentien, Anne; Declerck, Valérie; Aitken, David J

    2015-11-09

    This work describes the use of conformer-selective laser spectroscopy following supersonic expansion to probe the local folding proclivities of four-membered ring cyclic β-amino acid building blocks. Emphasis is placed on stereochemical effects as well as on the structural changes induced by the replacement of a carbon atom of the cycle by a nitrogen atom. The amide A IR spectra are obtained and interpreted with the help of quantum chemistry structure calculations. Results provide evidence that the building block with a trans-substituted cyclobutane ring has a predilection to form strong C8 hydrogen bonds. Nitrogen-atom substitution in the ring induces the formation of the hydrazino turn, with a related but distinct hydrogen-bonding network: the structure is best viewed as a bifurcated C8/C5 bond with the N heteroatom lone electron pair playing a significant acceptor role, which supports recent observations on the hydrazino turn structure in solution. Surprisingly, this study shows that the cis-substituted cyclobutane ring derivative also gives rise predominantly to a C8 hydrogen bond, although weaker than in the two former cases, a feature that is not often encountered for this building block.

  11. Onset of the Electronic Absorption Spectra of Isolated and π-Stacked Oligomers of 5,6-Dihydroxyindole: An Ab Initio Study of the Building Blocks of Eumelanin.

    Science.gov (United States)

    Tuna, Deniz; Udvarhelyi, Anikó; Sobolewski, Andrzej L; Domcke, Wolfgang; Domratcheva, Tatiana

    2016-04-14

    Eumelanin is a naturally occurring skin pigment which is responsible for developing a suntan. The complex structure of eumelanin consists of π-stacked oligomers of various indole derivatives, such as the monomeric building block 5,6-dihydroxyindole (DHI). In this work, we present an ab initio wave-function study of the absorption behavior of DHI oligomers and of doubly and triply π-stacked species of these oligomers. We have simulated the onset of the electronic absorption spectra by employing the MP2 and the linear-response CC2 methods. Our results demonstrate the effect of an increasing degree of oligomerization of DHI and of an increasing degree of π-stacking of DHI oligomers on the onset of the absorption spectra and on the degree of red-shift toward the visible region of the spectrum. We find that π-stacking of DHI and its oligomers substantially red-shifts the onset of the absorption spectra. Our results also suggest that the optical properties of biological eumelanin cannot be simulated by considering the DHI building blocks alone, but instead the building blocks indole-semiquinone and indole-quinone have to be considered as well. This study contributes to advancing the understanding of the complex photophysics of the eumelanin biopolymer.

  12. Analysis on thermal bridge of building mortar in insulation building block in view of thermal theory%基于热工理论的保温砌块用砌筑砂浆的热桥分析

    Institute of Scientific and Technical Information of China (English)

    卢玫珺; 郑智峰; 王春苑

    2012-01-01

    Aero-concrete insulation building block was extensively used as padding wall of framed building. At present, mixed mortar is mostly adopted as building mortar. But in view of major structure, mixed mortar has relative heat conduction coefficient. Thus, part of lime crack will become thermal bridge problem in heat transmission of aero-concrete insulation building block. Energy efficiency of padding wall will be seriously reduced. In view of thermal theory, mixed and insulation mortar are partly selected, and effect on thermal bridge of aero-concrete insulation building block is analyzed in thermal property. Insulation mortar is used in insulation building block, obvious effect on building energy efficiency will be come into being. This conclusion is of the same view just right with national standard GB 50411-2007 "Code for Acceptance of Energy Efficient Building Construction".%加气混凝土保温砌块被广泛用作框架结构填充墙,目前大多采用混合砂浆作为砌筑砂浆.然而相对于主体结构的加气混凝土而言,混合砂浆导热系数相对较大,因此,灰缝部分就成为加气混凝土保温砌块传热的热桥,这将严重降低填充墙节能效果.基于热工理论,分别选取混合砂浆和保温砂浆,对加气混凝土砌块的热桥影响进行热工性能分析,保温砌块采用保温砂浆砌筑,将取得明显的建筑节能效果,该结论与GB 50411-2007《建筑节能工程施工质量验收规范》具有一致性.

  13. Dendritic poly(L-lysine)-b-Poly(L-lactide)-b-dendritic poly(L-lysine) amphiphilic gene delivery vectors: roles of PLL dendritic generation and enhanced transgene efficacies via termini modification.

    Science.gov (United States)

    Li, Yang; Zhu, Yingdan; Xia, Kejia; Sheng, Ruilong; Jia, Lin; Hou, Xiaodong; Xu, Yuhong; Cao, Amin

    2009-08-10

    As an effort to prepare new efficient gene delivery vectors, we have recently developed and reported an amphiphilic dendritic poly(L-lysine)-b-poly(L-lactide)-b-dendritic poly(L-lysine) D(2)-PLLA-D(2) with two-generation PLL dendrons and a PLLA block. In this work, we continued to explore the roles of dendritic PLL generation in DNA binding and intracellular delivery of gene, and a new series of amphiphilic dendritic poly(L-lysine)-b-poly(L-lactide)-b-dendritic poly(L-lysine)s D(n)-PLLA-D(n) (n = 3-5) were synthesized and were structurally characterized. Furthermore, plasmid DNA binding affinity for these cationic amphiphiles was examined by agarose gel electrophoresis and fluorescence titration assay in pure water and PBS buffer solution containing 150 mM NaCl (pH = 7.4), respectively. By dynamic light scattering (DLS) and transmission electronic microscopy (TEM), the interaction and complexation in between were investigated, concerning the DNA/vector polyplex particle morphologies and zeta potentials. Utilizing a human hepatocellular carcinoma cell-line SMMC-7721, cell toxicity, and gene transfection in vitro were explored. To further improve transgene efficiency for these synthetic cationic amphiphiles as gene delivery vectors, new structural DE(n)-PLLA-DE(n) (n = 2-3) were prepared through an amino termini modification of the D(n)-PLLA-D(n) (n = 2-3) with less toxic 4,7,10,13-tetraazatridecanoic acids, and gene transfection with these DE(n)-PLLA-DE(n) (n = 2-3) was examined with an alternative human gastric carcinoma cell-line HGC-27. As a result, the high plasmid DNA binding affinity, low cytotoxicity, and much enhanced transgene efficacy suggest a new possible clue to design effective synthetic gene delivery vectors with amphiphilic skeleton and less toxic polyamine building blocks.

  14. Motivational interviewing competencies among UK family nurse partnership nurses: a process evaluation component of the building blocks trial.

    Science.gov (United States)

    Channon, Sue; Bekkers, Marie-Jet; Sanders, Julia; Cannings-John, Rebecca; Robertson, Laura; Bennert, Kristina; Butler, Christopher; Hood, Kerenza; Robling, Michael

    2016-01-01

    Motivational Interviewing (MI) is a person-centred counselling approach to behaviour change which is increasingly being used in public health settings, either as a stand-alone approach or in combination with other structured programmes of health promotion. One example of this is the Family Nurse Partnership (FNP) a licensed, preventative programme for first time mothers under the age of 20, delivered by specialist family nurses who are additionally trained in MI. The Building Blocks trial was an individually randomised controlled trial comparing effectiveness of Family Nurse Partnership when added to usual care compared to usual care alone within 18 sites in England. The aim of this process evaluation component of the trial is to determine the extent to which Motivational Interviewing skills taught to Family Nurse Partnership nurses were used in their home visits with clients. Between July 2010 and November 2011, 92 audio-recordings of nurse-client consultations were collected during the 'pregnancy' and 'infancy' phases of the FNP programme. They were analysed using The Motivational Interviewing Treatment Integrity (MITI) coding system. A competent level of overall MI adherent practice according to the MITI criteria for 'global clinician ratings' was apparent in over 70 % of the consultations. However, on specific behaviours and the MITI-derived practitioner competency variables, there was a large variation in the percentage of recordings in which "beginner proficiency" levels in MI (as defined by the MITI criteria) was achieved, ranging from 73.9 % for the 'MI adherent behaviour' variable in the pregnancy phase to 6.7 % for 'percentage of questions coded as open' in the infancy phase. The results suggest that it is possible to deliver a structured programme in an MI-consistent way. However, some of the behaviours regarded as key to MI practice such as the percentage of questions coded as open can be more difficult to achieve in such a context. This is an

  15. Design, synthesis, and properties of a new class of building blocks for assembly of molecule-based magnets

    Science.gov (United States)

    Misiolek, Andrzej Wladyslaw

    In this work, mono and dianions of the tetrone 1 were proposed as discrete building blocks for assembly of molecular magnets.* These anionic subunits are designed to form extended multidimensional structures upon complexation with metal rations. This particular framework also was chosen so that dianion 12- (or its derivatives) would possess a paramagnetic triplet as a ground state. High quality ab-initio CASSCF(14, 12)/6-31+G* calculations showed that indeed the singlet-triplet gap of metal complexes of 1 2- is small and its sign and magnitude tongly depends on structural modifications. For example a 17.3 kcal/mol preference for a singlet is predicted for isolated 12- while the triplet state is preferred by 4.3 kcal/mol for the symmetrically coordinated complex 1(AlF2)2.* Synthetic procedures leading to a family of neutral aryl substituted tetrones (2) has been developed and electrochemical studies have shown that they may be reversibly reduced in two successive one-electron processes to mono- and dianions. These mono- and dianions have been generated on a preparative scale by reduction of the parent tetrones with alkali metals under anaerobic conditions. Solutions of anions were characterized by Vis-NIR, NMR and EPR spectroscopy. EPR of the anion radicals 2- reveals the high symmetry of the spin delocalisation. Spectroscopic studies of dianions were hampered by low solubility and aggregation phenomena and no definite answer concerning their ground spin states could be obtained. Several attempts were made to grow single crystals of 2 - and 22- in order to probe the self-assembling properties of those species and to obtain definite answers concerning the ground state of the dianion. These attempts turned out to be successful only for alkali metal salts of the monoanion (t-Bu) 8(MeO)42-. Its K + salt crystallized as 1-D chains with the expected bridging and chelating mode of coordination. The closely related Na+ salt, recently crystallized by Robert Gentner, shows a

  16. Development of valence-directed nanoparticle building blocks on the basis of controlled bio/nano-interfacing chemistry

    Science.gov (United States)

    Kim, Jeong-Hwan

    The assembly of nanoparticles in controllable and predictable ways would not only aid practical nanoscale assembly, which requires accurate and scalable assembly of large and complex nanoscale structures, but also would increase their utility for many applications, including electronics, optics, sensing and imaging, medical diagnostics, etc. Well-defined and controlled functionality and directionality of the building blocks are essential to actively control the molecular assembly processes at the nanometer scale. Such controls over the functionality and directionality would enable us to construct sophisticated nanostructures to take advantage of the increasing number of available nanocomponents and ultimately to approximate the complexity and the functionality of current microfabrication. We have developed a serial solid-phase placement approach to synthesize anisotropically or symmetrically functionalized gold nanoparticles (AuNPs), in which the functionality and directionality (e.g., numbers, locations, and orientations) of the functional ligands are controlled. Two types of bi-functionalized (bif-) AuNPs were synthesized at a site-specific manner with increased yield and accuracy: (1) homo-bif-AuNPs with two carboxyl groups at ˜180° angle (para-configuration) and (2) hetero-bif-AuNPs with one carboxyl and one amine functional groups at less than 180°, but greater than 90° angle (meta-configuration). With such control, we successfully demonstrated the assembly of intentionally designed one-dimensional (1D) chains with homo-bif-AuNPs and two-dimensional (2D) rings with hetero-bif-AuNPs, confirming the high functional as well as directional selectivity of the functionalized NPs. This study represents an important step towards accurate, reliable, and scaled-up manufacturing of complex nanoscale structures, potentially making 'bottom-up' nanofabrication of practical use. We have further developed the ligand replacement technology to achieve such active controls

  17. Catalytic enantioselective construction of quaternary stereocenters: assembly of key building blocks for the synthesis of biologically active molecules.

    Science.gov (United States)

    Liu, Yiyang; Han, Seo-Jung; Liu, Wen-Bo; Stoltz, Brian M

    2015-03-17

    compatible with a wide range of arylboronic acids, β-substituents, and ring sizes. Aside from benzylic quaternary stereocenters, a more challenging motif is a quaternary stereocenter not adjacent to an aromatic group. Such centers represent more general structures in chemical space but are more difficult to form by asymmetric catalysis. To address this greater challenge, and motivated by the greater reward, we entered the field of palladium-catalyzed asymmetric allylic alkylation of prochiral enolate nucleophiles about a decade ago. On the basis of Tsuji's work, which solved the issue of positional selectivity for unsymmetrical ketones, we discovered that the phosphinooxazoline ligand effectively rendered this reaction enantioselective. Extensive investigations since then have revealed that the reaction exhibits broad scope and accepts a range of substrate classes, each with its unique advantage in synthetic applications. A diverse array of carbonyl compounds bearing α-quaternary stereocenters are obtained in excellent yields and enantioselectivities, and more possibilities have yet to be explored. As an alternative to palladium catalysis, we also studied iridium-catalyzed asymmetric allylic alkylations that generate vicinal quaternary and tertiary stereocenters in a single transformation. Overall, these methods provide access to small molecule building blocks with a single quaternary stereocenter, can be applied to various molecular scaffolds, and tolerate a wide range of functional groups. We envision that the chemistry reported in this Account will be increasingly useful in drug discovery and design.

  18. An fMRI study of the impact of block building and board games on spatial ability

    Directory of Open Access Journals (Sweden)

    Sharlene D. Newman

    2016-08-01

    Full Text Available Previous studies have found that block play, board games and puzzles result in better spatial ability. This study focused on examining the differential impact of structured block play and board games on spatial processing. Two groups of eight year olds were studied. One group participated in a five session block play training paradigm and the second group had a similar training protocol but played a word/spelling board game. A mental rotation task was assessed before and after training. The mental rotation task was performed during fMRI to observe the neural changes associated with the two play protocols. Only the block play group showed effects of training for both behavioral measures and fMRI measured brain activation. Behaviorally, the block play group showed improvements in both reaction time and accuracy. Additionally, the block play group showed increased involvement of regions that have been linked to spatial working memory and spatial processing after training. The board game group showed non-significant improvements in mental rotation performance, likely related to practice effects, and no training related brain activation differences. While the current study is preliminary, it does suggest that different spatial play activities have differential impacts on spatial processing with structured block play but not board games showing a significant impact on mental rotation performance.

  19. An fMRI Study of the Impact of Block Building and Board Games on Spatial Ability.

    Science.gov (United States)

    Newman, Sharlene D; Hansen, Mitchell T; Gutierrez, Arianna

    2016-01-01

    Previous studies have found that block play, board games, and puzzles result in better spatial ability. This study focused on examining the differential impact of structured block play and board games on spatial processing. Two groups of 8-year-old children were studied. One group participated in a five session block play training paradigm and the second group had a similar training protocol but played a word/spelling board game. A mental rotation task was assessed before and after training. The mental rotation task was performed during fMRI to observe the neural changes associated with the two play protocols. Only the block play group showed effects of training for both behavioral measures and fMRI measured brain activation. Behaviorally, the block play group showed improvements in both reaction time and accuracy. Additionally, the block play group showed increased involvement of regions that have been linked to spatial working memory and spatial processing after training. The board game group showed non-significant improvements in mental rotation performance, likely related to practice effects, and no training related brain activation differences. While the current study is preliminary, it does suggest that different "spatial" play activities have differential impacts on spatial processing with structured block play but not board games showing a significant impact on mental rotation performance.

  20. Forensic intelligence framework. Part II: Study of the main generic building blocks and challenges through the examples of illicit drugs and false identity documents monitoring.

    Science.gov (United States)

    Baechler, Simon; Morelato, Marie; Ribaux, Olivier; Beavis, Alison; Tahtouh, Mark; Kirkbride, K Paul; Esseiva, Pierre; Margot, Pierre; Roux, Claude

    2015-05-01

    The development of forensic intelligence relies on the expression of suitable models that better represent the contribution of forensic intelligence in relation to the criminal justice system, policing and security. Such models assist in comparing and evaluating methods and new technologies, provide transparency and foster the development of new applications. Interestingly, strong similarities between two separate projects focusing on specific forensic science areas were recently observed. These observations have led to the induction of a general model (Part I) that could guide the use of any forensic science case data in an intelligence perspective. The present article builds upon this general approach by focusing on decisional and organisational issues. The article investigates the comparison process and evaluation system that lay at the heart of the forensic intelligence framework, advocating scientific decision criteria and a structured but flexible and dynamic architecture. These building blocks are crucial and clearly lay within the expertise of forensic scientists. However, it is only part of the problem. Forensic intelligence includes other blocks with their respective interactions, decision points and tensions (e.g. regarding how to guide detection and how to integrate forensic information with other information). Formalising these blocks identifies many questions and potential answers. Addressing these questions is essential for the progress of the discipline. Such a process requires clarifying the role and place of the forensic scientist within the whole process and their relationship to other stakeholders. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  1. 27 May 2010 - UCLA Chancellor G. Block signing the guest book with Coordinator for External Relations F. Pauss and visiting CMS control centre at building 354 with Collaboration Former Deputy Spokesperson B. Cousins and Deputy Spokesperson J. Incandela.

    CERN Multimedia

    Maximilien Brice

    2010-01-01

    27 May 2010 - UCLA Chancellor G. Block signing the guest book with Coordinator for External Relations F. Pauss and visiting CMS control centre at building 354 with Collaboration Former Deputy Spokesperson B. Cousins and Deputy Spokesperson J. Incandela.

  2. 轻质隔热砌块在建筑上的应用%Application of Light Heat Insulation Blocks to Buildings

    Institute of Scientific and Technical Information of China (English)

    蔡建时; 刘宝泉

    2011-01-01

    The production of light thermal insulation block which is used for thermal insulation materials of wall with industrial waste can both satisfy the building needs and reduce environment pollution . In this paper the performance feature of the light heat insulation block was described and finally the production of heat insulation and energy preservation wall material with industrial waste was confirmed .%利用工业废弃物来生产轻质隔热砌块用作墙体保温,既能减少环境污染,又可满足建筑需要。文章对轻质隔热砌块的性能特点进行了介绍,指出大量利用工业废弃物生产保温节能墙体材料是可行的。

  3. Establishing an Appropriate Level of Detail (LoD) for a Building Information Model (BIM) - West Block, Parliament Hill, Ottawa, Canada

    Science.gov (United States)

    Fai, S.; Rafeiro, J.

    2014-05-01

    In 2011, Public Works and Government Services Canada (PWGSC) embarked on a comprehensive rehabilitation of the historically significant West Block of Canada's Parliament Hill. With over 17 thousand square meters of floor space, the West Block is one of the largest projects of its kind in the world. As part of the rehabilitation, PWGSC is working with the Carleton Immersive Media Studio (CIMS) to develop a building information model (BIM) that can serve as maintenance and life-cycle management tool once construction is completed. The scale and complexity of the model have presented many challenges. One of these challenges is determining appropriate levels of detail (LoD). While still a matter of debate in the development of international BIM standards, LoD is further complicated in the context of heritage buildings because we must reconcile the LoD of the BIM with that used in the documentation process (terrestrial laser scan and photogrammetric survey data). In this paper, we will discuss our work to date on establishing appropriate LoD within the West Block BIM that will best serve the end use. To facilitate this, we have developed a single parametric model for gothic pointed arches that can be used for over seventy-five unique window types present in the West Block. Using the AEC (CAN) BIM as a reference, we have developed a workflow to test each of these window types at three distinct levels of detail. We have found that the parametric Gothic arch significantly reduces the amount of time necessary to develop scenarios to test appropriate LoD.

  4. Bidirectional cross metathesis and ring-closing metathesis/ring opening of a C2-symmetric building block: a strategy for the synthesis of decanolide natural products

    Directory of Open Access Journals (Sweden)

    Bernd Schmidt

    2013-11-01

    Full Text Available Starting from the conveniently available ex-chiral pool building block (R,R-hexa-1,5-diene-3,4-diol, the ten-membered ring lactones stagonolide E and curvulide A were synthesized using a bidirectional olefin-metathesis functionalization of the terminal double bonds. Key steps are (i a site-selective cross metathesis, (ii a highly diastereoselective extended tethered RCM to furnish a (Z,E-configured dienyl carboxylic acid and (iii a Ru–lipase-catalyzed dynamic kinetic resolution to establish the desired configuration at C9. Ring closure was accomplished by macrolactonization. Curvulide A was synthesized from stagonolide E through Sharpless epoxidation.

  5. Bidirectional cross metathesis and ring-closing metathesis/ring opening of a C 2-symmetric building block: a strategy for the synthesis of decanolide natural products.

    Science.gov (United States)

    Schmidt, Bernd; Kunz, Oliver

    2013-01-01

    Starting from the conveniently available ex-chiral pool building block (R,R)-hexa-1,5-diene-3,4-diol, the ten-membered ring lactones stagonolide E and curvulide A were synthesized using a bidirectional olefin-metathesis functionalization of the terminal double bonds. Key steps are (i) a site-selective cross metathesis, (ii) a highly diastereoselective extended tethered RCM to furnish a (Z,E)-configured dienyl carboxylic acid and (iii) a Ru-lipase-catalyzed dynamic kinetic resolution to establish the desired configuration at C9. Ring closure was accomplished by macrolactonization. Curvulide A was synthesized from stagonolide E through Sharpless epoxidation.

  6. Titanocene(III)-catalyzed 6-exo versus 7-endo cyclizations of epoxypolyprenes: efficient control and synthesis of versatile terpenic building blocks.

    Science.gov (United States)

    Justicia, José; Jiménez, Tania; Miguel, Delia; Contreras-Montoya, Rafael; Chahboun, Rachid; Alvarez-Manzaneda, Enrique; Collado-Sanz, Daniel; Cárdenas, Diego J; Cuerva, Juan M

    2013-10-18

    In this article, a complete study on the selectivity of titanocene(III) cyclization of epoxypolyprenes is presented. The requirements for the formation of six- or seven-membered rings during these cyclizations are determined, taking into account the different substitution pattern in the epoxypolyprene precursor. Thus, a complete selectivity to 6-exo or 7-endo cyclization process has been achieved, yielding mono-, bi-, and even tricyclic compounds, constituting a new and efficient access to this type of derivative. Additionally, this procedure opens the possibility to prepare excellent building blocks for the synthesis of polycyclic compounds with a trisubstituted oxygenated function, which is present in several natural terpenes.

  7. Building Blocks on the Sea – simulating the realisation of the M2Cell system in contemporary context of cruise industry

    OpenAIRE

    Ylirisku, Vesa

    2012-01-01

    Building Blocks on the Sea – Simulating realisation of M2 Cell -concept in contemporary context on projektiin pohjautuva opinnäytetyö, jonka perustavana päämääränä on kehittää eteenpäin muunneltavaa moduulisysteemiä nimeltään M2Cell simuloimalla konseptin toimintaa nykyaikaisen risteilyteollisuuden kontekstissa. Toisin sanoen työn tavoitteena on vastata tämän innovatiivisen systeemin kehittämistarpeeseen niin uusien ideoiden kuin yleisen kehittämisenkin kautta keskittyen systeemin toiminnalli...

  8. Silver(I 2,2'-(1,2-Phenylenedisulfanediyldiacetic Acid as a Molecular Building Block for a Silver(I-Cadmium(II Coordination Polymer

    Directory of Open Access Journals (Sweden)

    Ioana Georgeta Grosu

    2015-05-01

    Full Text Available Starting from heterotopic multidentate ligand 2,2'-(1,2-phenylenedisulfanediyldiacetic acid, (RS,RS,RS,RS/SS,SS,SS,SS-[Ag{1,2-C6H4(SCH2COOH2-κ2S,S'}2]BF4 (1 was prepared and further used as a building block for the synthesis of heterobimetallic Ag-Cd coordination polymer [Ag2Cd2{1,2-(OOCCH2S2C6H4}3 (H2O3·5H2O]n (2. Both complexes were characterized by X-ray structure analysis and conventional spectroscopic techniques.

  9. Novel biodegradable aliphatic poly(butylene succinate-co-cyclic carbonate)s with functional carbonate building blocks. 1. Chemical synthesis and their structural and physical characterization.

    Science.gov (United States)

    Yang, Jing; Hao, Qinghui; Liu, Xiaoyun; Ba, Chaoyi; Cao, Amin

    2004-01-01

    This study presents chemical synthesis, structural, and physical characterization of novel biodegradable aliphatic poly(butylene succinate-co-cyclic carbonate)s P(BS-co-CC) bearing functional carbonate building blocks. First, five kinds of six-membered cyclic carbonate monomers, namely, trimethylene carbonate (TMC), 1-methyl-1,3-trimethylene carbonate (MTMC), 2,2-dimethyl-1,3-trimethylene carbonate (DMTMC), 5-benzyloxytrimethylene carbonate (BTMC), and 5-ethyl-5-benzyloxymethyl trimethylene carbonate (EBTMC), were well prepared from ethyl chloroformate and corresponding diols at 0 degrees C in THF solution with our modified synthetic strategies. Then, a series of new P(BS-co-CC)s were synthesized at 210 degrees C through a simple combination of poly-condensation and ring-opening-polymerization (ROP) of hydroxyl capped PBS macromers and the prepared carbonate monomers, and titanium tetra-isopropoxide Ti(i-OPr)4 was used as a more suitable catalyst of 5 candidate catalysts which could concurrently catalyze poly-condensation and ROP. By means of NMR, GPC, FTIR, and thermal analytical instruments, macromolecular structures and physical properties have been characterized for these aliphatic poly(ester carbonate)s. The experimental results indicated that novel biodegradable P(BS-co-CC)s were successfully synthesized with number average molecular weight Mn ranging from 24.3 to 99.6 KDa and various CC molar contents without any detectable decarboxylation and that the more bulky side group was attached to a cyclic carbonate monomer, the lower reactivity for its copolymerization would be observed. The occurrences of 13C NMR signal splitting of succinyl carbonyl attributed to the BS building blocks could be proposed due to the randomized sequences of BS and CC building blocks. FTIR characterization indicated two distinct absorption bands at 1716 and 1733 approximately 1735 cm(-1), respectively, stemming from carbonyl stretching modes for corresponding BS and CC units. With

  10. The building blocks of a 'Liveable Neighbourhood': Identifying the key performance indicators for walking of an operational planning policy in Perth, Western Australia.

    Science.gov (United States)

    Hooper, Paula; Knuiman, Matthew; Foster, Sarah; Giles-Corti, Billie

    2015-11-01

    Planning policy makers are requesting clearer guidance on the key design features required to build neighbourhoods that promote active living. Using a backwards stepwise elimination procedure (logistic regression with generalised estimating equations adjusting for demographic characteristics, self-selection factors, stage of construction and scale of development) this study identified specific design features (n=16) from an operational planning policy ("Liveable Neighbourhoods") that showed the strongest associations with walking behaviours (measured using the Neighbourhood Physical Activity Questionnaire). The interacting effects of design features on walking behaviours were also investigated. The urban design features identified were grouped into the "building blocks of a Liveable Neighbourhood", reflecting the scale, importance and sequencing of the design and implementation phases required to create walkable, pedestrian friendly developments.

  11. Energy Efficiency and Conservation Block Grant (EECBG) - Better Buildings Neighborhood Program at Greater Cincinnati Energy Alliance: Home Performance with Energy Star® and Better Buildings Performance

    Energy Technology Data Exchange (ETDEWEB)

    Holzhauser, Andy; Jones, Chris; Faust, Jeremy; Meyer, Chris; Van Divender, Lisa

    2013-12-30

    The Greater Cincinnati Energy Alliance (Energy Alliance) is a nonprofit economic development agency dedicated to helping Greater Cincinnati and Northern Kentucky communities reduce energy consumption. The Energy Alliance has launched programs to educate homeowners, commercial property owners, and nonprofit organizations about energy efficiency opportunities they can use to drive energy use reductions and financial savings, while extending significant focus to creating/retaining jobs through these programs. The mission of the Energy Alliance is based on the premise that investment in energy efficiency can lead to transformative economic development in a region. With support from seven municipalities, the Energy Alliance began operation in early 2010 and has been among the fastest growing nonprofit organizations in the Greater Cincinnati/Northern Kentucky area. The Energy Alliance offers two programs endorsed by the Department of Energy: the Home Performance with ENERGY STAR® Program for homeowners and the Better Buildings Performance Program for commercial entities. Both programs couple expert guidance, project management, and education in energy efficiency best practices with incentives and innovative energy efficiency financing to help building owners effectively invest in the energy efficiency, comfort, health, longevity, and environmental impact of their residential or commercial buildings. The Energy Alliance has raised over $23 million of public and private capital to build a robust market for energy efficiency investment. Of the $23 million, $17 million was a direct grant from the Department of Energy Better Buildings Neighborhood Program (BBNP). The organization’s investments in energy efficiency projects in the residential and commercial sector have led to well over $50 million in direct economic activity and created over 375,000 hours of labor created or retained. In addition, over 250 workers have been trained through the Building Performance Training

  12. A Self-Assembled Aggregate Composed of a Fatty Acid Membrane and the Building Blocks of Biological Polymers Provides a First Step in the Emergence of Protocells

    Science.gov (United States)

    Black, Roy A.; Blosser, Matthew C.

    2016-01-01

    We propose that the first step in the origin of cellular life on Earth was the self-assembly of fatty acids with the building blocks of RNA and protein, resulting in a stable aggregate. This scheme provides explanations for the selection and concentration of the prebiotic components of cells; the stabilization and growth of early membranes; the catalysis of biopolymer synthesis; and the co-localization of membranes, RNA and protein. In this article, we review the evidence and rationale for the formation of the proposed aggregate: (i) the well-established phenomenon of self-assembly of fatty acids to form vesicles; (ii) our published evidence that nucleobases and sugars bind to and stabilize such vesicles; and (iii) the reasons why amino acids likely do so as well. We then explain how the conformational constraints and altered chemical environment due to binding of the components to the membrane could facilitate the formation of nucleosides, oligonucleotides and peptides. We conclude by discussing how the resulting oligomers, even if short and random, could have increased vesicle stability and growth more than their building blocks did, and how competition among these vesicles could have led to longer polymers with complex functions. PMID:27529283

  13. Synthesis and NMR studies of malonyl-linked glycoconjugates of N-(2-aminoethylglycine. Building blocks for the construction of combinatorial glycopeptide libraries

    Directory of Open Access Journals (Sweden)

    Markus Nörrlinger

    2016-08-01

    Full Text Available Four glycoconjugate building blocks for the construction of combinatorial PNA like glycopeptide libraries were prepared in 75–79% yield by condensing tert-butyl N-[2-(N-9-fluorenylmethoxycarbonylaminoethyl]glycinate (AEG 5 with 3-oxo-3-(2,3,4,6-tetra-O-acetyl-β-D-glucopyranosylamino- (6a, 3-oxo-3-(β-D-galactopyranosylamino- (6b, 3-oxo-3-(2-acetamido-2-deoxy-3,4,6-tetra-O-acetyl-β-D-glucopyranosylamino- (6c and 3-oxo-3-(2-acetamido-2-deoxy-3,4,6-tetra-O-acetyl-β-D-galactopyranosylaminopropanoic acid (6d, respectively. The resulting AEG glycoconjugates 1a–d were converted into the corresponding free acids 2a–d in 97–98% yield by treatment with aqueous formic acid. The Fmoc group of compound 1c was removed and the intermediate amine 9 was condensed with 2a to afford the corresponding glycosylated AEG dipeptide 4 in 58% yield. All glycoconjugate building blocks showed the presence of cis and trans rotamers. Compounds 1a, 1b and 4 were subjected to temperature dependent 1H NMR spectroscopy in order to determine the coalescence temperature which resulted in calculated rotation barriers of 17.9–18.3 kcal/mol for the rotamers.

  14. Illumination pupil optimization in 0.33NA EUVL by intensity balancing for semi-iso dark field two-bar M1 building blocks

    Science.gov (United States)

    Last, T.; de Winter, L.; van Adrichem, P.; Finders, J.

    2016-10-01

    We will shed light on the optimization of lithographic metrics for the semi-isolated dark field two-bar logic building block. Under standard D90Y illumination this building block suffers from large mask 3D induced relative focus dependent CD asymmetries. Such behavior limits its overlapping process window and gives rise to untenable full wafer CDU and intra-field pattern shifts. We have found that besides a Ta absorber thickness reduction an illumination pupil optimization is necessary to fully remove these CD asymmetries. The pupil optimization is achieved by relating the aerial image decomposition (here: symmetrization and balancing of intensities across the diffracted orders) with lithographic metrics per pupil plane location. The resulting pupil allows us (i) to lift the focus-dependent CD asymmetries and (ii) to co-optimize a number of lithographic metrics such as overlapping process window, contrast, non-telecentricity and pattern shift. The importance of subsidiary conditions (e.g. symmetry of the pupil, required DOF) will be discussed.

  15. AAC 砌块自由加载墙施工工法%Construction Technology of the Free Loading Wall of AAC Building Block

    Institute of Scientific and Technical Information of China (English)

    陆建辉; 戴伟军; 朱晓波

    2016-01-01

    AAC (Autoclaved Aerated Concrete) building block is light in self-weigh, good fireproof, warm-proof and more easily cutting. But the strength of AAC building block is low. The AAC can’t be easily loaded, punched or holed. Its strength and warm-proof will get lower, when it meets water especially. The technology of the free loading wall of AAC building block (AAC wall) adopts the mixed wall structure, which consists of AAC building blocks, shale bricks and concrete bricks. The AAC wall can be easily loaded, punched, holed and free to fit all kinds of deformation, when you put concrete bricks or shale bricks into AAC wall through BIM design. Using the technology of mortar cover with wire mesh and boundary plugging, the AAC wall can be better in waterproof yet. Using the different thickness among building block wall, shale bricks wall and concrete beam or column, adopting the technology of heat bridge of gearing each other, the heat bridge can be overcome. This technology has solved the common quality failing of AAC wall, enlarging its integrity and use range, increasing the function of punching, holing or waterproofing systemically. It can be widely utilized in inside wall or outside wall because of producing and manufacturing in industry.%AAC 砌块自重轻、易切割、防火与保温性好,但其强度低、不能任意加载,开槽开洞局限较多,遇水湿胀且强度和保温性能变低。 AAC 砌块自由加载墙体施工工艺采用 AAC 砌块、页岩砖、素混凝土块混墙结构,通过 BIM 排块设计,在 AAC 砌块墙体中嵌入素混凝土块,在箱体集中处砌筑页岩砖墙体,以自由地适应加载、开槽开洞和墙体变形;利用表面网膜和界面封堵工艺,较好地解决了防渗防漏;利用砌块墙与页岩砖墙、混凝土梁柱间的厚度差,采用热桥咬合工艺,较好地解决了热桥。该工法系统地解决 AAC 砌块墙体的质量通病、使用局限,增强 AAC砌块墙体的

  16. Numerical simulation of {sup 222}RN exhalation from phosphogypsum building blocks and accumulation inside a closed chamber

    Energy Technology Data Exchange (ETDEWEB)

    Rabi Junior, Jose A. [Sao Paulo Univ., Pirassununga, SP (Brazil). Faculdade de Zootecnia e Engenharia de Alimentos]. E-mail: jrabi@fzea.usp.br; Silva, Nivaldo C. da [Pontificia Univ. Catolica de Minas Gerais, Pocos de Caldas, MG (Brazil)]|[Comissao Nacional de Energia Nuclear (CNEN), Pocos de Caldas, MG (Brazil). Laboratorio]. E-mail: ncsilva@pucpcaldas.br; ncsilva@cnen.gov.br

    2005-07-01

    Zero-order models for {sup 222}Rn exhalation from phosphogypsum-bearing building materials and its transient indoor accumulation assume uniform distribution inside the enclosure. Conversely, this paper numerically simulates a transient two-dimensional {sup 222}Rn accumulation in a test chamber that contains a phosphogypsum board at one wall. Results show that above hypothesis might be oversimplified when spatial dependence is considered. (author)

  17. Inducible expression of endomorphins in murine dendritic cells.

    Science.gov (United States)

    Yang, Xiaohuai; Xia, Hui; Chen, Yong; Liu, Xiaofen; Zhou, Cheng; Gao, Qin; Li, Zhenghong

    2012-12-15

    Bone marrow precursor cells were extracted from C57BL/6J mice aged 7-8 weeks, and dendritic cells were purified using anti-CD11c (a specific marker for dendritic cells) antibody-coated magnetic beads. Immunofluorescence staining revealed that the expression levels of endomorphin-1 and endomorphin-2 were upregulated in dendritic cells activated by lipopolysaccharide. An enzyme immunoassay showed that lipopolysaccharide and other Toll-like receptor ligands promoted the secretion of endomorphin-1 and endomorphin-2 from activated dendritic cells. [(3)H]-thymidine incorporation demonstrated that endomorphin-1 and endomorphin-2 both inhibited the proliferation of T lymphocyte induced by activated dendritic cells. Furthermore, this immunosuppressive effect was blocked by CTOP, a specific antagonist of µ-opioid receptors. Our experimental findings indicate that activated dendritic cells can induce the expression and secretion of endomorphins, and that endomorphins suppress T lymphocyte proliferation through activation of µ-opioid receptors.

  18. Inducible expression of endomorphins in murine dendritic cells

    Institute of Scientific and Technical Information of China (English)

    Xiaohuai Yang; Hui Xia; Yong Chen; Xiaofen Liu; Cheng Zhou; Qin Gao; Zhenghong Li

    2012-01-01

    Bone marrow precursor cells were extracted from C57BL/6J mice aged 7–8 weeks, and dendritic cells were purified using anti-CD11c (a specific marker for dendritic cells) antibody-coated magnetic beads. Immunofluorescence staining revealed that the expression levels of endomorphin-1 and endomorphin-2 were upregulated in dendritic cells activated by lipopolysaccharide. An enzyme immunoassay showed that lipopolysaccharide and other Toll-like receptor ligands promoted the secretion of endomorphin-1 and endomorphin-2 from activated dendritic cells. [3H]-thymidine incorporation demonstrated that endomorphin-1 and endomorphin-2 both inhibited the proliferation of T lymphocyte induced by activated dendritic cells. Furthermore, this immunosuppressive effect was blocked by CTOP, a specific antagonist of μ-opioid receptors. Our experimental findings indicate that activated dendritic cells can induce the expression and secretion of endomorphins, and that endomorphins suppress T lymphocyte proliferation through activation of μ-opioid receptors.

  19. Building Languages

    Science.gov (United States)

    ... Training Manually Coded English (MCE) Natural Gestures Speech Speech Reading (Lip Reading) Even though American Sign Language (ASL) is not a building block, it is sometimes used together with one or more building blocks. Close Information For... Media Policy Makers File Formats Help: How do I view ...

  20. Bainbridge Energy Challenge. Energy efficiency and conservation block grant (EECBG) - Better buildings neighborhood program. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Kraus, Yvonne X.

    2014-02-14

    RePower Bainbridge and Bremerton (RePower) is a residential energy-efficiency and conservation program designed to foster a sustainable, clean, and renewable energy economy. The program was a 3.5 year effort in the cities of Bainbridge Island and Bremerton, Washington, to conserve and reduce energy use, establish a trained home performance trade ally network, and create local jobs. RePower was funded through a $4.8 million grant from the US Department of Energy, Better Buildings Program. The grant’s performance period was August 1, 2010 through March 30, 2014.

  1. Isothermal Dendritic Growth Experiment - PVA Dendrites

    Science.gov (United States)

    1997-01-01

    The Isothermal Dendritic Growth Experiment (IDGE), flown on three Space Shuttle missions, is yielding new insights into virtually all industrially relevant metal and alloy forming operations. IDGE used transparent organic liquids that form dendrites (treelike structures) similar to those inside metal alloys. Comparing Earth-based and space-based dendrite growth velocity, tip size and shape provides a better understanding of the fundamentals of dentritic growth, including gravity's effects. Shalowgraphic images of pivalic acid (PVA) dendrites forming from the melt show the subtle but distinct effects of gravity-driven heat convection on dentritic growth. In orbit, the dendrite grows as its latent heat is liberated by heat conduction. This yields a blunt dendrite tip. On Earth, heat is carried away by both conduction and gravity-driven convection. This yields a sharper dendrite tip. In addition, under terrestrial conditions, the sidebranches growing in the direction of gravity are augmented as gravity helps carry heat out of the way of the growing sidebranches as opposed to microgravity conditions where no augmentation takes place. IDGE was developed by Rensselaer Polytechnic Institute and NASA/Glenn Research Center. Advanced follow-on experiments are being developed for flight on the International Space Station. Photo Credit: NASA/Glenn Research Center

  2. 2D NMR EVIDENCE OF FORMATION OF TRIBLOCK COPOLYMERS OF COIL POLY(ETHYLENE GLYCOL) WITH TWO DENDRITIC POLY(BENZYL ETHER) BLOCKS%二维核磁共振法研究线型聚乙二醇与树枝状聚苄醚形成的三嵌段共聚物

    Institute of Scientific and Technical Information of China (English)

    段学欣; 袁飞; 温笑菁; 杨淼; 林海; 孙平川; 何炳林; 王维

    2004-01-01

    Tri-block amphiphilic copolymers with hybrid architectures were synthesized by coupling linear poly(ethylene glycol)(PEG) and dendritic second-generation Fréchet-type poly (benzyl ether)(PBE) via the Williarnson reaction (Gisotv, et al. Angew Chem, Int Ed Engl, 1992,31:1200 - 1202). Our experimental study shows that the powerful two-dimensional 1H-13C heteronuclear multiple-quantum correlation (HMQC) and two-dimensional 1H-13C heteronuclear multiple-bond correlation (HMBC) NMR techniques rather than the classical one-dimensional 1H and 13C-NMR methods can provide clear evidence to verify the formation of the tri-block copolymers. In our measurements HMQC and HMBC NMR techniques directly detected the signal of ether bonds bridged inbetween PBE dendrons and PEG blocks, therefore, the formation of the block copolymers are evidently confirmed in molecular level. This work also provides a general method to exactly confirm the formation of block copolymers.

  3. Dendritic spine detection using curvilinear structure detector and LDA classifier.

    Science.gov (United States)

    Zhang, Yong; Zhou, Xiaobo; Witt, Rochelle M; Sabatini, Bernardo L; Adjeroh, Donald; Wong, Stephen T C

    2007-06-01

    Dendritic spines are small, bulbous cellular compartments that carry synapses. Biologists have been studying the biochemical pathways by examining the morphological and statistical changes of the dendritic spines at the intracellular level. In this paper a novel approach is presented for automated detection of dendritic spines in neuron images. The dendritic spines are recognized as small objects of variable shape attached or detached to multiple dendritic backbones in the 2D projection of the image stack along the optical direction. We extend the curvilinear structure detector to extract the boundaries as well as the centerlines for the dendritic backbones and spines. We further build a classifier using Linear Discriminate Analysis (LDA) to classify the attached spines into valid and invalid types to improve the accuracy of the spine detection. We evaluate the proposed approach by comparing with the manual results in terms of backbone length, spine number, spine length, and spine density.

  4. Bottom-up processing of thermoelectric nanocomposites from colloidal nanocrystal building blocks: the case of Ag{sub 2}Te-PbTe

    Energy Technology Data Exchange (ETDEWEB)

    Cadavid, Doris [Catalonia Institute for Energy Research, IREC (Spain); Ibanez, Maria [Universitat de Barcelona, Departament d' Electronica (Spain); Gorsse, Stephane [Universite de Bordeaux, ICMCB, CNRS (France); Lopez, Antonio M. [Universitat Politecnica de Catalunya, Departament d' Enginyeria Electronica (Spain); Cirera, Albert [Universitat de Barcelona, Departament d' Electronica (Spain); Morante, Joan Ramon; Cabot, Andreu, E-mail: acabot@irec.cat [Catalonia Institute for Energy Research, IREC (Spain)

    2012-12-15

    Nanocomposites are highly promising materials to enhance the efficiency of current thermoelectric devices. A straightforward and at the same time highly versatile and controllable approach to produce nanocomposites is the assembly of solution-processed nanocrystal building blocks. The convenience of this bottom-up approach to produce nanocomposites with homogeneous phase distributions and adjustable composition is demonstrated here by blending Ag{sub 2}Te and PbTe colloidal nanocrystals to form Ag{sub 2}Te-PbTe bulk nanocomposites. The thermoelectric properties of these nanocomposites are analyzed in the temperature range from 300 to 700 K. The evolution of their electrical conductivity and Seebeck coefficient is discussed in terms of the blend composition and the characteristics of the constituent materials.

  5. A Solution-Processable Molecule using Thieno[3,2-b]thiophene as Building Block for Efficient Organic Solar Cells.

    Science.gov (United States)

    Wei, Huan; Chen, Weichao; Han, Liangliang; Wang, Ting; Bao, Xichang; Li, Xiaoyun; Liu, Jie; Zhou, Yuanhang; Yang, Renqiang

    2015-08-01

    A solution-processed acceptor-π-donor-π-acceptor (A-π-D-π-A) type small molecule, namely DCATT, has been designed and synthesized for the application as donor material in organic solar cells. The fused aromatic unit thieno[3,2-b]thiophene (TT) flanked with thiophene is applied as π bridge, while 4,8-bisthienyl substituted benzodithiophene (BDT) and 2-ethylhexyl cyanoacetate are chosen as the central building block and end group, respectively. Introduction of fused ring to the small molecule enhances the conjugation length of the main chain, and gives a strong tendency to form π-π stacking with a large overlapping area which favors to high charge carrier transport. Small-molecule organic solar cells based on blends of DCATT and fullerene acceptor exhibit power conversion efficiencies as high as 5.20 % under the illumination of AM 1.5G, 100 mW cm(-2) .

  6. Proposed and existing passive and inherent safety-related structures, systems, and components (building blocks) for advanced light-water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Forsberg, C.W.; Moses, D.L.; Lewis, E.B.; Gibson, R.; Pearson, R.; Reich, W.J.; Murphy, G.A.; Staunton, R.H.; Kohn, W.E.

    1989-10-01

    A nuclear power plant is composed of many structures, systems, and components (SSCs). Examples include emergency core cooling systems, feedwater systems, and electrical systems. The design of a reactor consists of combining various SSCs (building blocks) into an integrated plant design. A new reactor design is the result of combining old SSCs in new ways or use of new SSCs. This report identifies, describes, and characterizes SSCs with passive and inherent features that can be used to assure safety in light-water reactors. Existing, proposed, and speculative technologies are described. The following approaches were used to identify the technologies: world technical literature searches, world patent searches, and discussions with universities, national laboratories and industrial vendors. 214 refs., 105 figs., 26 tabs.

  7. Magnetic stray-field studies of a single Cobalt nanoelement as a component of the building blocks of artificial square spin ice

    Science.gov (United States)

    Pohlit, Merlin; Porrati, Fabrizio; Huth, Michael; Ohno, Yuzo; Ohno, Hideo; Müller, Jens

    2016-02-01

    We use Focused Electron Beam Deposition (FEBID) to directly write Cobalt magnetic nanoelements onto a micro-Hall magnetometer, which allows for high-sensitivity measurements of the magnetic stray field emanating from the samples. In a previous study [M. Pohlit et al., J. Appl. Phys. 117 (2015) 17C746] [21] we investigated thermal dynamics of an individual building block (nanocluster) of artificial square spin ice. In this work, we compare the results of this structure with interacting elements to the switching of a single nanoisland. By analyzing the survival function of the repeatedly prepared state in a given temperature range, we find thermally activated switching dynamics. A detailed analysis of the hysteresis loop reveals a metastable microstate preceding the overall magnetization reversal of the single nanoelement, also found in micromagnetic simulations. Such internal degrees of freedom may need to be considered, when analyzing the thermal dynamics of larger spin ice configurations on different lattice types.

  8. Proposed and existing passive and inherent safety-related structures, systems, and components (building blocks) for advanced light-water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Forsberg, C.W.; Moses, D.L.; Lewis, E.B.; Gibson, R.; Pearson, R.; Reich, W.J.; Murphy, G.A.; Staunton, R.H.; Kohn, W.E.

    1989-10-01

    A nuclear power plant is composed of many structures, systems, and components (SSCs). Examples include emergency core cooling systems, feedwater systems, and electrical systems. The design of a reactor consists of combining various SSCs (building blocks) into an integrated plant design. A new reactor design is the result of combining old SSCs in new ways or use of new SSCs. This report identifies, describes, and characterizes SSCs with passive and inherent features that can be used to assure safety in light-water reactors. Existing, proposed, and speculative technologies are described. The following approaches were used to identify the technologies: world technical literature searches, world patent searches, and discussions with universities, national laboratories and industrial vendors. 214 refs., 105 figs., 26 tabs.

  9. Switching slips. Building blocks for a robust environmental policy for the 21st century; Wissels omzetten. Bouwstenen voor een robuust milieubeleid voor de 21e eeuw

    Energy Technology Data Exchange (ETDEWEB)

    Hoogervorst, N.; Hajer, M.; Dietz, F.; Timmerhuis, J.; Kruitwagen, S.

    2013-06-15

    With this 'signal report', PBL (Netherlands Environmental Assessment Agency) offers building blocks for a robust environmental policy for the twentyfirst century, such as changes in consumer behavior, new coalitions of interests and stakeholders, and the establishment of an investment fund for eco-innovation. Which track does the Netherlands want to follow? With this essay, PBL is calling for a broad public debate on this issue [Dutch] In dit signalenrapport reikt het PBL (Planbureau voor de Leefomgeving) bouwstenen aan voor een robuust milieubeleid voor de eenentwintigste eeuw, zoals gedragsverandering van consumenten, nieuwe coalities van belangen en betrokkenen, en de oprichting van een investeringsfonds voor eco-innovatie. Welk spoor wil Nederland bewandelen? Met dit essay roept het PBL op tot een breed maatschappelijk debat over deze vraag.

  10. Variable Stars in Local Group Galaxies. III. And VII, NGC 147, and NGC 185: Insight into the Building Blocks of the M31 Halo

    Science.gov (United States)

    Monelli, M.; Fiorentino, G.; Bernard, E. J.; Martínez-Vázquez, C. E.; Bono, G.; Gallart, C.; Dall'Ora, M.; Stetson, P. B.

    2017-06-01

    We present the discovery of 1568 RR Lyrae stars in three of the most luminous M31 satellites: And VII (573), NGC 147 (177), and NGC 185 (818). We use their properties to study the formation history of Local Group spiral haloes, and in particular, to infer about the nature of their possible building blocks by comparison with available data for RR Lyrae stars in the halo and in a sample of satellites of M31 and the Milky Way. We find that the brightest satellites and the halos of both galaxies host a number of High Amplitude Short Period (HASP) RR Lyrae variable stars, which are missing in the faintest satellites. HASP variable stars have been shown by Fiorentino et al. to be tracers of a population of stars as metal-rich as [Fe/H] ≃ -1.5 and older than ≃ 10 {Gyr}. This suggests that the metal-rich M31 and MW halo component, which manifests through the HASP phenomenon, comes from massive dwarf galaxy building blocks, as the low-mass dwarfs did not chemically enrich fast enough to produce them. All detected variable stars are new discoveries; in particular, this work presents the first detections of RR Lyrae stars in And VII. Moreover, a number of candidate Anomalous Cepheids, and binary and long-period variable stars have been detected. We provide pulsation properties (period, amplitude, mean magnitude), light curves, and time series photometry for all of the variable stars in the three galaxies. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555. These observations are associated with programs #10430 and #11724.

  11. A S-Layer Protein of Bacillus anthracis as a Building Block for Functional Protein Arrays by In Vitro Self-Assembly.

    Science.gov (United States)

    Wang, Xu-Ying; Wang, Dian-Bing; Zhang, Zhi-Ping; Bi, Li-Jun; Zhang, Ji-Bin; Ding, Wei; Zhang, Xian-En

    2015-11-18

    S-layer proteins create a cell-surface layer architecture in both bacteria and archaea. Because S-layer proteins self-assemble into a native-like S-layer crystalline structure in vitro, they are attractive building blocks in nanotechnology. Here, the potential use of the S-layer protein EA1 from Bacillus anthracis in constructing a functional nanostructure is investigated, and apply this nanostructure in a proof-of-principle study for serological diagnosis of anthrax. EA1 is genetically fused with methyl parathion hydrolase (MPH), to degrade methyl parathion and provide a label for signal amplification. EA1 not only serves as a nanocarrier, but also as a specific antigen to capture anthrax-specific antibodies. As results, purified EA1-MPH forms a single layer of crystalline nanostructure through self-assembly. Our chimeric nanocatalyst greatly improves enzymatic stability of MPH. When applied to the detection of anthrax-specific antibodies in serum samples, the detection of our EA1-MPH nanostructure is nearly 300 times more sensitive than that of the unassembled complex. Together, it is shown that it is possible to build a functional and highly sensitive nanosensor based on S-layer protein. In conclusion, our present study should serve as a model for the development of other multifunctional nanomaterials using S-layer proteins.

  12. Cation-mediated optical resolution and anticancer activity of chiral polyoxometalates built from entirely achiral building blocks

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Zhi-Ming; Duan, Xiaopin; Yao, Shuang; Wang, Zhishu; Lin, Zekai; Li, Yang-Guang; Long, La-Sheng; Wang, En-Bo; Lin, Wenbin

    2016-01-01

    We report the crystallization of homochiral polyoxometalate (POM) macroanions {CoSb6O4(H2O)3[Co(hmta)SbW8O31]3}15- (1, hmta = hexamethylenetetramine) via the counter cation-mediated chiral symmetry breaking and asymmetric autocatalytic processes. In the presence of low Co2+ concentrations both Δ- and Λ-enantiomers of 1 formed in the reaction, crystallizing into the racemic crystal rac-1. At a high Co2+ concentration, the polyoxoanion enantiomers showed a high level of chiral recognition via H-bonding interactions to crystallize into enantiopure crystals of Δ- or Λ-[Co(H2O)6{CoSb6O4(H2O)3[Co(hmta)SbW8O31]3}]13-. During crystallization, a microscale symmetry-breaking event and a nonlinear asymmetric autocatalysis process make the enantiomers crystallize in different batches, which provides an opportunity to isolate the homochiral bulk materials. The defined structures of the racemic and homochiral crystals thus provide a molecular-level illustration that H-bonding interactions are responsible for such high-level chiral recognition, in a process similar to the supramolecular chirality frequently observed in biology. These POM macroanions showed a high cytotoxicity against various cancer cells, particularly ovarian cancer cells. The antitumor activity of these compounds resulted at least in part from the activation of the apoptotic pathways, as shown by the flow cytometry, Annexin V staining, DNA ladder, and TUNEL assay, likely by blocking the cell cycle and complexing with proteins in cells. The POM macroanions reported herein provide promising and novel antitumor agents for the potential treatment of various cancers.

  13. Participatory Approach to Long-Term Socio-Economic Scenarios as Building Block of a Local Vulnerability and Risk Assessment Tool - The Case Study Lienz (East-Tyrol)

    Science.gov (United States)

    Meyer, Ina; Eder, Brigitte; Hama, Michiko; Leitner, Markus

    2016-04-01

    Risks associated with climate change are mostly still understood and analyzed in a sector- or hazard-specific and rarely in a systemic, dynamic and scenario-based manner. In addition, socio-economic trends are often neglected in local vulnerability and risk assessments although they represent potential key determinants of risk and vulnerability. The project ARISE (Adaptation and Decision Support via Risk Management Through Local Burning Embers) aims at filling this gap by applying a participatory approach to socio-economic scenario building as building block of a local vulnerability assessment and risk management tool. Overall, ARISE aims at developing a decision support system for climate-sensitive iterative risk management as a key adaptation tool for the local level using Lienz in the East-Tyrol as a test-site City. One central building block is participatory socio-economic scenario building that - together with regionalized climate change scenarios - form a centrepiece in the process-oriented assessment of climate change risks and vulnerability. Major vulnerabilities and risks may stem from the economic performance, the socio-economic or socio-demographic developments or changes in asset exposition and not from climate change impacts themselves. The IPCC 5th assessment report underlines this and states that for most economic sectors, the impact of climate change may be small relative to the impacts of other driving forces such as changes in population growth, age, income, technology, relative prices, lifestyle, regulation, governance and many other factors in the socio-economy (Arent et al., 2014). The paper presents the methodology, process and results with respect to the building of long-term local socio-economic scenarios for the City of Lienz and the surrounding countryside. Scenarios were developed in a participatory approach using a scenario workshop that involved major stakeholders from the region. Participatory approaches are increasingly recognized as

  14. Free dendritic growth

    Science.gov (United States)

    Glicksman, M. E.

    1984-01-01

    Free dendritic growth refers to the unconstrained development of crystals within a supercooled melt, which is the classical 'dendrite problem'. Great strides have been taken in recent years in both the theoretical understanding of dendritic growth and its experimental status. The development of this field will be sketched, showing that transport theory and interfacial thermodynamics (capillarity theory) were sufficient ingredients to develop a truly predictive model of dendrite formation. The convenient, but incorrect, notion of 'maximum velocity' was used for many years to estimate the behavior of dendritic transformations until supplanted by modern dynamic stability theory. The proper combinations of transport theory and morphological stability seem to able to predict the salient aspects of dendritic growth, especially in the neighborhood of the tip. The overall development of cast microstructures, such as equiaxed zone formation, rapidly solidified microstructures, etc., also seems to contain additional non-deterministic features which lie outside the current theories discussed here.

  15. Using Predefined M3(μ3-O) Clusters as Building Blocks for an Isostructural Series of Metal-Organic Frameworks.

    Science.gov (United States)

    Peng, Li; Asgari, Mehrdad; Mieville, Pascal; Schouwink, Pascal; Bulut, Safak; Sun, Daniel T; Zhou, Zhongrui; Pattison, Philip; van Beek, Wouter; Queen, Wendy L

    2017-07-19

    Metal-organic frameworks (MOFs) have attracted much attention in the past decade owing to their unprecedented internal surface areas, tunable topologies, designable surfaces, and various potential applications. One bottleneck in the field regarding MOF synthesis is controlling the metal-containing secondary building unit (SBU) incorporated into the structure. In this work we report the synthesis and characterization of five trimeric [M3(μ3-O)(CH3CO2)6](x) clusters (where M = Fe(3+), Cr(3+), Fe(3+)/Cr(3+), Fe(3+)/Co(2+), or Fe(3+)/Ni(2+) and x = +1 or 0). The monocarboxylate capping ligand, acetate in this case, readily undergoes exchange with several difunctional counterparts, including 1,4-benzenedicarboxylic acid (H2-BDC) and biphenyl-4,4'-dicarboxylic acid (H2-BPDC), for the formation of an isostructural series of MOFs, several of which are newly reported (for M = Fe(3+)/Cr(3+), Fe(3+)/Co(2+), and Fe(3+)/Ni(2+)) and show excellent CO2 adsorption properties. In this report, a host of techniques including NMR, ICP, and ESI-MS are used to probe the ligand exchange process and composition of the SBUs, and XAS is used to monitor the Fe(3+) and Cr(3+) environment throughout the reactions, giving strong evidence that the clusters stay intact throughout the MOF synthesis. This work reveals that predefined SBUs is an effective means to create metal-substituted analogues of known frameworks. Further, CO adsorption and in situ IR are used to probe accessibility of the metals after solvent removal. We show for the first time that the incorporation of the neutral clusters, containing weaker Lewis acids like Ni(2+) and Co(2+), can promote the formation of open metal sites in the MOF frameworks, structural features known to enhance the binding energy of small guest molecules like CO2.

  16. Rational Synthesis and Investigation of Porous Metal-Organic Framework Materials from a Preorganized Heterometallic Carboxylate Building Block.

    Science.gov (United States)

    Sapianik, Aleksandr A; Zorina-Tikhonova, Ekaterina N; Kiskin, Mikhail A; Samsonenko, Denis G; Kovalenko, Konstantin A; Sidorov, Alexey A; Eremenko, Igor L; Dybtsev, Danil N; Blake, Alexander J; Argent, Stephen P; Schröder, Martin; Fedin, Vladimir P

    2017-02-06

    The tetranuclear heterometallic complex [Li2Zn2(piv)6(py)2] (1, where piv(-) = pivalate and py = pyridine) has been successfully employed as a presynthesized node for the construction of four porous metal-organic frameworks (MOFs) [Li2Zn2(R-bdc)3(bpy)]·solv (2-R, R-bdc(2-); R = H, Br, NH2, NO2) by reaction with 4,4'-bipyridine (bpy) and terephthalate anionic linkers. The [Li2Zn2] node is retained in the products, representing a rare example of the rational step-by-step design of isoreticular MOFs based on complex heterometallic building units. The permanent porosity of the activated frameworks was confirmed by gas adsorption isotherm measurements (N2, CO2, CH4). Three compounds, 2-H, 2-Br, and 2-NH2 (but not 2-NO2), feature extensive hysteresis between the adsorption and desorption curves in the N2 isotherms at low pressures. The substituents R decorate the inner surface and also control the aperture of the channels, the volume of the micropores, and the overall surface area, thus affecting both the gas uptake and adsorption selectivity. The highest CO2 absorption at ambient conditions (105 cm(3)·g(-1) or 21 wt % at 273 K and 1 bar for 2-NO2) is above the average values for microporous MOFs. The photoluminescent properties of the prototypic 2-H as well as the corresponding host-guest compounds with various aromatic molecules (benzene, toluene, anisole, and nitrobenzene) were systematically investigated. We discovered a rather complex pattern in the emission response of this material depending on the wavelength of excitation as well as the nature of the guest molecules. On the basis of the crystal structure of 2-H, a mechanism for these luminescent properties is proposed and discussed.

  17. Dendritic polyurea polymers.

    Science.gov (United States)

    Tuerp, David; Bruchmann, Bernd

    2015-01-01

    Dendritic polymers, subsuming dendrimers as well as hyperbranched or highly branched polymers are well established in the field of polymer chemistry. This review article focuses on urea based dendritic polymers and summarizes their synthetic routes through both isocyanate and isocyanate-free processes. Furthermore, this article highlights applications where dendritic polyureas show their specific chemical and physical potential. For these purposes scientific publications as well as patent literature are investigated to generate a comprehensive overview on this topic.

  18. Characteristics of the Dendrite Growth in the Electrochemical Alane Production Process

    Directory of Open Access Journals (Sweden)

    Park Hyun-Kyu

    2016-01-01

    Full Text Available The electrochemical alane production process was proposed for a feasible production of alane. The operation of process was difficult because of short circuit by a dendrite growth in the reactor. Therefore, characteristics of the dendrite growth in the process were investigated. We conducted the electrochemical alane production process using Teflon block for inhibition of the dendrite growth. The obtained dendrite was characterized by XRD, SEM and ICP-AES. It was concluded that the dendrite growth was attributed to a melting and agglomeration of Al fine particles existed in the solution.

  19. Novel biodegradable aliphatic poly(butylene succinate-co-cyclic carbonate)s bearing functionalizable carbonate building blocks: II. Enzymatic biodegradation and in vitro biocompatibility assay.

    Science.gov (United States)

    Yang, Jing; Tian, Weisheng; Li, Qiaobo; Li, Yang; Cao, Amin

    2004-01-01

    In a previous study, we have reported chemical synthesis of novel aliphatic poly(butylene succinate-co-cyclic carbonate) P(BS-co-CC)s bearing various functionalizable carbonate building blocks, and this work will continue to present our new studies on their enzymatic degradation and in vitro cell biocompatibility assay. First, enzymatic degradation of the novel P(BS-co-CC) film samples was investigated with two enzymes of lipase B Candida Antartic (Novozyme 435) and lipase Porcine Pancreas PPL, and it was revealed that copolymerizing linear poly(butylene succinate) PBS with a functionalizable carbonate building block could remarkably accelerate the enzymatic degradation of a synthesized product P(BS-co-CC), and its biodegradation behavior was found to strongly depend on the overall impacts of several important factors as the cyclic carbonate (CC) comonomer structure and molar content, molar mass, thermal characteristics, morphology, the enzyme-substrate specificity, and so forth. Further, the biodegraded residual film samples and water-soluble enzymatic degradation products were allowed to be analyzed by means of proton nuclear magnetic resonance (1H NMR), gel permeation chromatograph (GPC), differential scanning calorimeter (DSC), attenuated total reflection FTIR (ATR-FTIR), scanning electron microscope (SEM), and liquid chromatograph-mass spectrometry (LC-MS). On the experimental evidences, an exo-type mechanism of enzymatic chain hydrolysis preferentially occurring in the noncrystalline domains was suggested for the synthesized new P(BS-co-CC) film samples. With regard to their cell biocompatibilities, an assay with NIH 3T3 mouse fibroblast cell was conducted using the novel synthesized P(BS-co-CC) films as substrates with respect to the cell adhesion and proliferation, and these new biodegradable P(BS-co-CC) samples were found to exhibit as low cell toxicity as the PLLA control, particularly the two samples of poly(butylene succinate-co-18.7 mol % dimethyl

  20. Constructing high-efficiency D-A-π-A-featured solar cell sensitizers: a promising building block of 2,3-diphenylquinoxaline for antiaggregation and photostability.

    Science.gov (United States)

    Pei, Kai; Wu, Yongzhen; Islam, Ashraful; Zhang, Qiong; Han, Liyuan; Tian, He; Zhu, Weihong

    2013-06-12

    Controlling the sensitizer morphology on a nanocrystalline TiO2 surface is beneficial to facilitating electron injection and suppressing charge recombination. Given that the grafted alkyl chain on a π-bridge thiophene segment for preventing π aggregation can deteriorate its intrinsic photostability, we incorporate a promising building block of 2,3-diphenylquinoxaline as the additional acceptor to construct a novel D-A-π-A-featured dye IQ4, which exhibits several characteristics: (i) efficiently decreasing the molecular HOMO-LUMO energy gap by extending its absorption bands; (ii) showing a moderate electron-withdrawing capability for an ideal balance in both promising photocurrent and photovoltage; (iii) endowing an ideal morphology control with strong capability of restraining the intermolecular aggregation and facilitating the formation of a compact sensitizer layer via two twisted phenyl groups grafted onto the quinoxaline unit. The coadsorbent-free dye-sensitized solar cell (DSSC) based on dye IQ4 exhibits very promising conversion efficiency as high as 9.24 ± 0.05%, with a short-circuit current density (Jsc) of 17.55 mA cm(-2), an open-circuit voltage (Voc) of 0.74 V, and a fill factor (FF) of 0.71 under AM 1.5 illumination (100 mW cm(-2)). IQ4-based DSSC devices with an ionic liquid electrolyte can keep constant performance during a 1000 h aging test under 1 sun at 60 °C. Because of spatial restriction, the two phenyl groups grafted onto the additional electron-withdrawing quinoxaline are demonstrated as efficient building blocks, not only improving its photostability and thermal stability but also allowing it to be a successful antiaggregation functional unit. As a consequence, the incorporated 2,3-diphenylquinoxaline unit can realize a facile structural modification for constructing organic coadsorbent-free D-A-π-A-featured sensitizers, thus paving a way to replace the common, stability-deleterious grafted alkyl chain on the thienyl bridge.

  1. Vibration characteristic of basic building block floating planetary gear train%基本构件浮动式行星轮系的振动特性

    Institute of Scientific and Technical Information of China (English)

    尹华魁; 蒋玲莉; 张锐; 李学军

    2014-01-01

    基本构件浮动是解决行星轮系均载问题的有效方法,基本构件浮动会改变整个行星轮系的模态,此类轮系设计过程中,需首先开展其固有特性研究,以规避共振区。研究了圆盘行星架浮动、太阳轮浮动、太阳轮与圆盘行星架同时浮动以及无构件浮动4种情况下行星轮系的振动特性,利用CATIA对行星轮系进行了参数化实体三维建模与干涉分析,通过有限元软件WORKBENCH进行了模态分析,分别提取了前10阶固有频率与振型,并对结果进行了分析和对比。论文研究可为基本构件浮动式行星轮系设计时共振区的规避提供参考和依据。%Floating of the basic building blocks is the effective method to solve the problem that planetary gear train is uneven load,but it change the mode of planetary gear train.Firstly,it is necessary for this kind of gear train to research their inherent characteristics in design process.So the resonance region will be avoided. Therefore,vibration characteristics of planetary gear train in four conditions were researched,which included the disc planet carrier floating,the sun wheel floating,the sun wheel and disc of planet carrier floating and without floating.The three -dimensional modeling software CATIA was used to establish the parametric three -dimensional solid model of the planetary gear train.Then interference was analysed.Through the finite element software WORKBENCH,the modal analysis was carried on that of planetary gear train in four conditions,and respectively to extract the first ten steps natural frequency and vibration mode of this four conditions,and the results was analyzed and compared.The reference and basis was provided for avoiding resonance region of the basic building blocks floating planetary gear train in the design phase.

  2. Crystal engineered acid–base complexes with 2D and 3D hydrogen bonding systems using p-hydroxybenzoic acid as the building block

    Directory of Open Access Journals (Sweden)

    PU SU ZHAO

    2010-04-01

    Full Text Available p-Hydroxybenzoic acid (p-HOBA was selected as the building block for self-assembly with five bases, i.e., diethylamine, tert-butylamine, cyclohexylamine, imidazole and piperazine, and generation of the corresponding acid–base complexes 1–5. Crystal structure analyses suggest that proton-transfer from the carboxyl hydrogen to the nitrogen atom of the bases can be observed in 1–4, while only in 5 does a solvent water molecule co-exist with p--HOBA and piperazine. With the presence of O–H···O hydrogen bonds in 1–4, the deprotonated p-hydroxybenzoate anions (p-HOBAA– are simply connected each other in a head-to-tail motif to form one-dimensional (1D arrays, which are further extended to distinct two-dimensional (2D (for 1 and 4 and three-dimensional (3D (for 2 and 3 networks via N–H···O interactions. While in 5, neutral acid and base are combined pair-wise by O–H···N and N–H···O bonds to form a 1D tape and then the 1D tapes are sequentially combined by water molecules to create a 3D network. Some interlayer or intralayer C–H···O, C–H···p and p×××p interactions help to stabilize the supramolecular buildings. Melting point determination analyses indicate that the five acid–base complexes are not the ordinary superposition of the reactants and they are more stable than the original reactants.

  3. Zeolitic polyoxometalates metal organic frameworks (Z-POMOF) with imidazole ligands and epsilon-Keggin ions as building blocks; computational evaluation of hypothetical polymorphs and a synthesis approach.

    Science.gov (United States)

    Rodriguez Albelo, L Marleny; Ruiz-Salvador, A Rabdel; Lewis, Dewi W; Gómez, Ariel; Mialane, Pierre; Marrot, Jérome; Dolbecq, Anne; Sampieri, Alvaro; Mellot-Draznieks, Caroline

    2010-08-14

    We investigate here a new family of zeolitic Metal Organic Frameworks (MOFs) based on imidazole (im) as the ligand and epsilon-type Keggin PolyOxoMetalates (POMs) as building units. The POM used in this study is the epsilon-{PMo(12)O(40)} Keggin isomer capped by four Zn(ii) ions (noted epsilon-Zn) in tetrahedral coordination. We describe here our methods to first construct and then evaluate the stability of hypothetical 3-D POMOFs possessing a tetrahedral network, typified by dense silica polymorphs and zeotypes and referred here to as Z-POMOFs. We use the analogy between the connectivity of silicon ion in dense minerals or zeolites and the epsilon-Zn, using imidazolate ligands to mimic the role of oxygen atoms in zeolites. Handling the epsilon-Keggin and imidazole as the constitutive building-blocks, a selection of 40 polymorphs were constructed and their relative stabilities computed. Among these Z-POMOFs, the cristobalite-like and zni-structure were identified as the most stable candidates. In parallel, we have attempted to synthesize Z-POMOF structures with epsilon-Zn POMs, synthesized in situ under hydrothermal conditions, and imidazole ligands. We present our first experimental result, the extended material [NBu(4)][PMo(V)(8)Mo(VI)(4)O(37)(OH)(3)Zn(4)(im)(Him)], named epsilon(im)(2). The structure of the hybrid framework is built by the connection of dimerized epsilon-Zn POMs to imidazole ligands in two directions. The obtaining of the first POMOF based on imidazole ligand is an encouraging step towards the synthesis of a new family of POMOFs.

  4. Using the Stern Blocks.

    Science.gov (United States)

    Stern, Margaret

    1987-01-01

    Extracts from "Experimenting with Numbers" by Margaret Stern demonstrate the use of Stern Blocks to develop the conceptual base on which learning disabled students can build further mathematical skills. (DB)

  5. Formation of Methylamine and Ethylamine in Extraterrestrial Ices and Their Role as Fundamental Building Blocks of Proteinogenic α-amino Acids

    Science.gov (United States)

    Förstel, Marko; Bergantini, Alexandre; Maksyutenko, Pavlo; Góbi, Sándor; Kaiser, Ralf I.

    2017-08-01

    The -CH-NH2 moiety represents the fundamental building block of all proteinogenic amino acids, with the cyclic amino acid proline being a special case (-CH-NH- in proline). Exploiting a chemical retrosynthesis, we reveal that methylamine (CH3NH2) and/or ethylamine (CH3CH2NH2) are essential precursors in the formation of each proteinogenic amino acid. In the present study we elucidate the abiotic formation of methylamine and ethylamine from ammonia (NH3) and methane (CH4) ices exposed to secondary electrons generated by energetic cosmic radiation in cometary and interstellar model ices. Our experiments show that methylamine and ethylamine are crucial reaction products in irradiated ices composed of ammonia and methane. Using isotopic substitution studies we further obtain valuable information on the specific reaction pathways toward methylamine. The very recent identification of methylamine and ethylamine together with glycine in the coma of 67P/Churyumov-Gerasimenko underlines their potential to the extraterrestrial formation of amino acids.

  6. Shape-dependent plasmonic response and directed self-assembly in a new semiconductor building block, indium-doped cadmium oxide (ICO).

    Science.gov (United States)

    Gordon, Thomas R; Paik, Taejong; Klein, Dahlia R; Naik, Gururaj V; Caglayan, Humeyra; Boltasseva, Alexandra; Murray, Christopher B

    2013-06-12

    The influence of particle shape on plasmonic response and local electric field strength is well-documented in metallic nanoparticles. Morphologies such as rods, plates, and octahedra are readily synthesized and exhibit drastically different extinction spectra than spherical particles. Despite this fact, the influence of composition and shape on the optical properties of plasmonic semiconductor nanocrystals, in which free electrons result from heavy doping, has not been well-studied. Here, we report the first observation of plasmonic resonance in indium-doped cadmium oxide (ICO) nanocrystals, which exhibit the highest quality factors reported for semiconductor nanocrystals. Furthermore, we are able to independently control the shape and free electron concentration in ICO nanocrystals, allowing for the influence of shape on the optical response of a plasmonic semiconductor to be conclusively demonstrated. The highly uniform particles may be self-assembled into ordered single component and binary nanocrystal superlattices, and in thin films, exhibit negative permittivity in the near infrared (NIR) region, validating their use as a new class of tunable low-loss plasmonic building blocks for 3-D optical metamaterials.

  7. INTOLERANT ATTITUDES BUILD WALLS AND BLOCK THE CONSTRUCTION OF BRIDGES: a cognitive-discoursive analysis of systematic metaphor emersion in opinion article genre

    Directory of Open Access Journals (Sweden)

    Ana Cristina Pelosi

    2016-03-01

    Full Text Available The article presents partial results of a research which is aimed at verifying how figurative language, specifically metaphoric and metonymic language, present in different textual genres such as the literary and the journalistic genres, contributes to the emergence and negotiation of meaning. The theoretic and methodological basis of the research comes from Conceptual Metaphor Theory, originally proposed by Lakoff and Johnson (1980 and expanded in the 90’s by theoreticians such as Grady (1997, and from Metaphor-Led Discourse Analysis (CAMERON ET AL, 2009; CAMERON; MASLEN, 2010. Research implementation involves two stages. An analysis of four exemplars of the genres under investigation according to Metaphor-Led Discourse Analysis and a second analysis, still to be carried out, of the talk of three focus groups composed by students of a state school in Santa Maria, RS, after the reading of the different genres. The preliminary analysis presented of the opinion article selected for this study reveals the presence of image-kinesthetic schemas and metaphoric/metonymic vehicles which structure the language present in the analyzed genre and contribute to the emergence of the systematic metaphor INTOLERANT ATTITUDES BUILD WALLS AND BLOCK THE CONSTRUCTION OF BRIDGES.

  8. CYP703 is an ancient cytochrome P450 in land plants catalyzing in-chain hydroxylation of lauric acid to provide building blocks for sporopollenin synthesis in pollen.

    Science.gov (United States)

    Morant, Marc; Jørgensen, Kirsten; Schaller, Hubert; Pinot, Franck; Møller, Birger Lindberg; Werck-Reichhart, Danièle; Bak, Søren

    2007-05-01

    CYP703 is a cytochrome P450 family specific to land plants. Typically, each plant species contains a single CYP703. Arabidopsis thaliana CYP703A2 is expressed in the anthers of developing flowers. Expression is initiated at the tetrad stage and restricted to microspores and to the tapetum cell layer. Arabidopsis CYP703A2 knockout lines showed impaired pollen development and a partial male-sterile phenotype. Scanning electron and transmission electron microscopy of pollen from the knockout plants showed impaired pollen wall development with absence of exine. The fluorescent layer around the pollen grains ascribed to the presence of phenylpropanoid units in sporopollenin was absent in the CYP703A2 knockout lines. Heterologous expression of CYP703A2 in yeast cells demonstrated that CYP703 catalyzes the conversion of medium-chain saturated fatty acids to the corresponding monohydroxylated fatty acids, with a preferential hydroxylation of lauric acid at the C-7 position. Incubation of recombinant CYP703 with methanol extracts from developing flowers confirmed that lauric acid and in-chain hydroxy lauric acids are the in planta substrate and product, respectively. These data demonstrate that in-chain hydroxy lauric acids are essential building blocks in sporopollenin synthesis and enable the formation of ester and ether linkages with phenylpropanoid units. This study identifies CYP703 as a P450 family specifically involved in pollen development.

  9. A Zinc(Ⅱ) Coordination Polymer Possessing a Linear Trinuclear Building Block[Zn3(CO2)6N2

    Institute of Scientific and Technical Information of China (English)

    JIANG Ya-Qi; LI Fang-Fang; XIE Zhao-Xiong

    2008-01-01

    A new coordination polymer[Zn3(bpda)3(bpy)]1(H2bpda=2,2'-biphenyldicarboxylic acid,bpy=4,4'-bipyridien)has been hydrothermally synthesized and characterized by single-crystal X-ray diffraction analysis,elemental analysis,TG analysis and IR spectrum.1 Crystallizes in cubic crystal system,space group Ia-3,with a=20.9687(9) A,V=9219.7(3)A3,Z=8,and R (Ⅰ>2σ(Ⅰ))=0.0431.Complex 1 is a three-dimensional framework involving a new building block,linear trinuclear {Zn3(CO2)6N2} cluster.In the structure,each bpda coordinates to four zinc atoms via its two bridging bidentate carboxylate groups.To the best of our knowledge,1 implies a new coordination mode of 2,2'-biphenyldicarboxylic acid. The solid state fluorescent spectra show a strong emission peak at 451 nm(λex=341 nm).

  10. Observed Faraday Effects in Damped Lyman-Alpha Absorbers and Lyman Limit Systems: The Magnetised Environment of Galactic Building Blocks at Redshift=2

    CERN Document Server

    Farnes, J S; Gaensler, B M; Haverkorn, M; O'Sullivan, S P; Curran, S J

    2016-01-01

    Protogalactic environments are typically identified using quasar absorption lines, and these galactic building blocks can manifest as Damped Lyman-Alpha Absorbers (DLAs) and Lyman Limit Systems (LLSs). We use radio observations of Faraday effects to test whether DLAs and LLSs host a magnetised medium, by combining DLA and LLS detections throughout the literature with 1.4 GHz polarization data from the NRAO VLA Sky Survey (NVSS). We obtain a control, a DLA, and a LLS sample consisting of 114, 19, and 27 lines-of-sight respectively - all of which are polarized at $\\ge8\\sigma$ to ensure Rician bias is negligible. Using a Bayesian framework, we are unable to detect either coherent or random magnetic fields in DLAs: the regular coherent magnetic fields within the DLAs must be $\\le2.8$ $\\mu$G, and the lack of depolarization is consistent with the weakly magnetised gas in DLAs being non-turbulent and quiescent. However, we find mild suggestive evidence that LLSs have coherent magnetic fields: after controlling for t...

  11. New Perspectives for Old Clusters: Anderson-Evans Anions as Building Blocks of Large Polyoxometalate Frameworks in a Series of Heterometallic 3 d-4 f Species.

    Science.gov (United States)

    Artetxe, Beñat; Reinoso, Santiago; San Felices, Leire; Lezama, Luis; Gutiérrez-Zorrilla, Juan M; Vicent, Cristian; Haso, Fadi; Liu, Tianbo

    2016-03-18

    A series of nine [Sb7W36O133Ln3M2(OAc)(H2O)8](17-) heterometallic anions (Ln3M2; Ln=La-Gd, M=Co; Ln=Ce, M=Ni and Zn) have been obtained by reacting 3 d metal disubstituted Krebs-type tungstoantimonates(III) with early lanthanides. Their unique tetrameric structure contains a novel {MW9O33} capping unit formed by a planar {MW6O24} fragment to which three {WO2} groups are condensed to form a tungstate skeleton identical to that of a hypothetical trilacunary derivative of the ɛ-Keggin cluster. It is shown, for the first time, that classical Anderson-Evans {MW6O24} anions can act as building blocks to construct purely inorganic large frameworks. Unprecedented reactivity in the outer ring of these disk-shaped species is also revealed. The Ln3M2 anions possess chirality owing to a {Sb4O4} cluster being encapsulated in left- or right-handed orientations. Their ability to self-associate in blackberry-type vesicles in solution has been assessed for the Ce3Co2 derivative.

  12. Microbial production of the aromatic building-blocks (S)-styrene oxide and (R)-1,2-phenylethanediol from renewable resources.

    Science.gov (United States)

    McKenna, Rebekah; Pugh, Shawn; Thompson, Brian; Nielsen, David R

    2013-12-01

    (S)-Styrene oxide and (R)-1,2-phenylethanediol are chiral aromatic molecular building blocks used commonly as precursors to pharmaceuticals and other specialty chemicals. Two pathways have been engineered in Escherichia coli for their individual biosynthesis directly from glucose. The novel pathways each constitute extensions of the previously engineered styrene pathway, developed by co-expressing either styrene monooxygenase (SMO) or styrene dioxygenase (SDO) to convert styrene to (S)-styrene oxide and (R)-1,2-phenylethanediol, respectively. StyAB from Pseudomonas putida S12 was determined to be the most effective SMO. SDO activity was achieved using NahAaAbAcAd of Pseudomonas sp. NCIB 9816-4, a naphthalene dioxygenase with known broad substrate specificity. Production of phenylalanine, the precursor to both pathways, was systematically enhanced through a number of mutations, most notably via deletion of tyrA and over-expression of tktA. As a result, (R)-1,2-phenylethanediol reached titers as high as 1.23 g/L, and at 1.32 g/L (S)-styrene oxide titers already approach their toxicity limit. As with other aromatics, product toxicity was strongly correlated with a model of membrane accumulation and disruption. This study additionally demonstrates that greater flux through the styrene pathway can be achieved if its toxicity is addressed, as achieved in this case by reacting styrene to less toxic products. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. An electron-deficient small molecule accessible from sustainable synthesis and building blocks for use as a fullerene alternative in organic photovoltaics.

    Science.gov (United States)

    McAfee, Seth M; Topple, Jessica M; Payne, Abby-Jo; Sun, Jon-Paul; Hill, Ian G; Welch, Gregory C

    2015-04-27

    An electron-deficient small molecule accessible from sustainable isoindigo and phthalimide building blocks was synthesized via optimized synthetic procedures that incorporate microwave-assisted synthesis and a heterogeneous catalyst for Suzuki coupling, and direct heteroarylation carbon-carbon bond forming reactions. The material was designed as a non-fullerene acceptor with the help of DFT calculations and characterized by optical, electronic, and thermal analysis. Further investigation of the material revealed a differing solid-state morphology with the use of three well-known processing conditions: thermal annealing, solvent vapor annealing and small volume fractions of 1,8-diiodooctane (DIO) additive. These unique morphologies persist in the active layer blends and have demonstrated a distinct influence on device performance. Organic photovoltaic-bulk heterojunction (OPV-BHJ) devices show an inherently high open circuit voltage (Voc ) with the best power conversion efficiency (PCE) cells reaching 1.0 V with 0.4 v/v % DIO as a processing additive.

  14. Prebiotic synthesis of nucleic acids and their building blocks at the atomic level - merging models and mechanisms from advanced computations and experiments.

    Science.gov (United States)

    Šponer, Judit E; Szabla, Rafał; Góra, Robert W; Saitta, A Marco; Pietrucci, Fabio; Saija, Franz; Di Mauro, Ernesto; Saladino, Raffaele; Ferus, Martin; Civiš, Svatopluk; Šponer, Jiří

    2016-07-27

    The origin of life on Earth is one of the most fascinating questions of contemporary science. Extensive research in the past decades furnished diverse experimental proposals for the emergence of first informational polymers that could form the basis of the early terrestrial life. Side by side with the experiments, the fast development of modern computational chemistry methods during the last 20 years facilitated the use of in silico modelling tools to complement the experiments. Modern computations can provide unique atomic-level insights into the structural and electronic aspects as well as the energetics of key prebiotic chemical reactions. Many of these insights are not directly obtainable from the experimental techniques and the computations are thus becoming indispensable for proper interpretation of many experiments and for qualified predictions. This review illustrates the synergy between experiment and theory in the origin of life research focusing on the prebiotic synthesis of various nucleic acid building blocks and on the self-assembly of nucleotides leading to the first functional oligonucleotides.

  15. Automated radiosynthesis of no-carrier-added 4-[18F]fluoroiodobenzene: a versatile building block in 18F radiochemistry.

    Science.gov (United States)

    Way, Jenilee Dawn; Wuest, Frank

    2014-02-01

    4-[18F]Fluoroiodobenzene ([18F]FIB) is a versatile building block in 18F radiochemistry used in various transition metal-mediated C-C and C-N cross-coupling reactions and [18F]fluoroarylation reactions. Various synthesis routes have been described for the preparation of [18F]FIB. However, to date, no automated synthesis of [18F]FIB has been reported to allow access to larger amounts of [18F]FIB in high radiochemical and chemical purity. Herein, we describe an automated synthesis of no-carrier-added [18F]FIB on a GE TRACERlab™ FX automated synthesis unit starting from commercially available(4-iodophenyl)diphenylsulfonium triflate as the labelling precursor. [18F]FIB was prepared in high radiochemical yields of 89 ± 10% (decay-corrected, n = 7) within 60 min, including HPLC purification. The radiochemical purity exceeded 95%, and specific activity was greater than 40 GBq/μmol. Typically, from an experiment, 6.4 GBq of [18F]FIB could be obtained starting from 10.4 GBq of [18F]fluoride.

  16. Growth-dissolution-regrowth transitions of Fe3O4 nanoparticles as building blocks for 3D magnetic nanoparticle clusters under hydrothermal conditions.

    Science.gov (United States)

    Lin, Mouhong; Huang, Haoliang; Liu, Zuotao; Liu, Yingju; Ge, Junbin; Fang, Yueping

    2013-12-10

    Magnetic nanoparticle clusters (MNCs) are a class of secondary structural materials that comprise chemically defined nanoparticles assembled into clusters of defined size. Herein, MNCs are fabricated through a one-pot solvothermal reaction featuring self-limiting assembly of building blocks and the controlled reorganization process. Such growth-dissolution-regrowth fabrication mechanism overcomes some limitations of conventional solvothermal fabrication methods with regard to restricted available feature size and structural complexity, which can be extended to other oxides (as long as one can be chelated by EDTA-2Na). Based on this method, the nanoparticle size of MNCs is tuned between 6.8 and 31.2 nm at a fixed cluster diameter of 120 nm, wherein the critical size for superparamagnetic-ferromagnetic transition is estimated from 13.5 to 15.7 nm. Control over the nature and secondary structure of MNCs gives an excellent model system to understand the nanoparticle size-dependent magnetic properties of MNCs. MNCs have potential applications in many different areas, while this work evaluates their cytotoxicity and Pb(2+) adsorption capacity as initial application study.

  17. Chitosan microspheres with an extracellular matrix-mimicking nanofibrous structure as cell-carrier building blocks for bottom-up cartilage tissue engineering.

    Science.gov (United States)

    Zhou, Yong; Gao, Huai-Ling; Shen, Li-Li; Pan, Zhao; Mao, Li-Bo; Wu, Tao; He, Jia-Cai; Zou, Duo-Hong; Zhang, Zhi-Yuan; Yu, Shu-Hong

    2016-01-07

    Scaffolds for tissue engineering (TE) which closely mimic the physicochemical properties of the natural extracellular matrix (ECM) have been proven to advantageously favor cell attachment, proliferation, migration and new tissue formation. Recently, as a valuable alternative, a bottom-up TE approach utilizing cell-loaded micrometer-scale modular components as building blocks to reconstruct a new tissue in vitro or in vivo has been proved to demonstrate a number of desirable advantages compared with the traditional bulk scaffold based top-down TE approach. Nevertheless, micro-components with an ECM-mimicking nanofibrous structure are still very scarce and highly desirable. Chitosan (CS), an accessible natural polymer, has demonstrated appealing intrinsic properties and promising application potential for TE, especially the cartilage tissue regeneration. According to this background, we report here the fabrication of chitosan microspheres with an ECM-mimicking nanofibrous structure for the first time based on a physical gelation process. By combining this physical fabrication procedure with microfluidic technology, uniform CS microspheres (CMS) with controlled nanofibrous microstructure and tunable sizes can be facilely obtained. Especially, no potentially toxic or denaturizing chemical crosslinking agent was introduced into the products. Notably, in vitro chondrocyte culture tests revealed that enhanced cell attachment and proliferation were realized, and a macroscopic 3D geometrically shaped cartilage-like composite can be easily constructed with the nanofibrous CMS (NCMS) and chondrocytes, which demonstrate significant application potential of NCMS as the bottom-up cell-carrier components for cartilage tissue engineering.

  18. Experimental verification of AI decomposition-based source optimization for M1 two-bar building blocks in 0.33NA EUVL

    Science.gov (United States)

    Last, T.; Wang, Z.; van Adrichem, P.; de Winter, L.; Finders, J.

    2016-10-01

    Traditional pupil optimization for horizontal dark field two-bar building blocks yields a dipole matching its local pitch. This classical "rule" guides the placement for the illumination into a pupil area of high contrast and exposure latitude. However under these illumination conditions the feature exhibits an extremely large relative CD Bossung separation limiting its overlapping process window. Here we show experimentally that contrast-aware source optimization is necessary to lift this relative separation. The Tachyon-generated pupil applied is a very close replica of a rigorously obtained asymmetric illumination solution. The latter has emerged out of a study which evidenced that the formation of this rigorous pupil can be traced back to the interdependency of CD Bossung formation and symmetry of the intensity spectrum across the diffraction orders. Compared to standard D90Y and leaf shape illumination, the optimized pupil provides the highest simulated contrast, and experimentally obtained highest depth-of-focus and lowest pattern shift range. Finally we compare the consequences of intensity balancing versus phase aberration minimization across the diffraction orders and conclude that the balancing of the intensity spectrum is the main responsible factor for lifting the feature's CD Bossung asymmetry and separation.

  19. Solution-phase submonomer diversification of aza-dipeptide building blocks and their application in aza-peptide and aza-DKP synthesis.

    Science.gov (United States)

    Bourguet, Carine B; Proulx, Caroline; Klocek, Sophie; Sabatino, David; Lubell, William D

    2010-06-01

    Aza-peptides have been used as tools for studying SARs in programs aimed at drug discovery and chemical biology. Protected aza-dipeptides were synthesized by a solution-phase submonomer approach featuring alkylation of N-terminal benzophenone semicarbazone aza-Gly-Xaa dipeptides using different alkyl halides in the presence of potassium tert-butoxide as base. Benzophenone protected aza-dipeptide tert-butyl ester 31c was selectively deprotected at the C-terminal ester or N-terminal hydrazone to afford, respectively, aza-dipeptide acid and amine building blocks 36c and 40c, which were introduced into longer aza-peptides. Alternatively, removal of the benzophenone semicarbazone protection from aza-dipeptide methyl esters 29a-c led to intramolecular cyclization to produce aza-DKPs 39a-c. In light of the importance of aza-peptides and DKPs as therapeutic agents and probes of biological processes, this diversity-oriented solution-phase approach may provide useful tools for studying peptide science. (c) 2010 European Peptide Society and John Wiley & Sons, Ltd.

  20. Building blocks for organizational change.

    Science.gov (United States)

    Daly, Rich

    2014-05-01

    To understand the types of organizational change that will best help them meet strategic goals, hospitals and health systems are: Projecting their quality and savings goals for the coming years and weighing their ability to meet them. Looking for partner organizations that share their culture, goals, and capabilities. Assessing the types of organizational arrangements that will provide the desired benefits. Determining the key components needed to make the arrangement fit their goals and culture.

  1. Building blocks for national cyberpower

    CSIR Research Space (South Africa)

    Van Vuuren, JJ

    2016-01-01

    Full Text Available for national power and the formula of Cline. In this paper, the formula for Perceived Power (PP) will be adapted for use in cyberspace to create a similar formula for Perceived Cyberpower (PCP) in context that will primarily focus on a state’s capacity... national power, than simply a means or attribute of national power. Thus, for a formulation for perceived cyberpower (PCP) would be best expressed as a replication or fractal of national power, and not a unique independent attribute. National security...

  2. A general principle governs vision-dependent dendritic patterning of retinal ganglion cells.

    Science.gov (United States)

    Xu, Hong-Ping; Sun, Jin Hao; Tian, Ning

    2014-10-15

    Dendritic arbors of retinal ganglion cells (RGCs) collect information over a certain area of the visual scene. The coverage territory and the arbor density of dendrites determine what fraction of the visual field is sampled by a single cell and at what resolution. However, it is not clear whether visual stimulation is required for the establishment of branching patterns of RGCs, and whether a general principle directs the dendritic patterning of diverse RGCs. By analyzing the geometric structures of RGC dendrites, we found that dendritic arbors of RGCs underwent a substantial spatial rearrangement after eye-opening. Light deprivation blocked both the dendritic growth and the branch patterning, suggesting that visual stimulation is required for the acquisition of specific branching patterns of RGCs. We further showed that vision-dependent dendritic growth and arbor refinement occurred mainly in the middle portion of the dendritic tree. This nonproportional growth and selective refinement suggest that the late-stage dendritic development of RGCs is not a passive stretching with the growth of eyes, but rather an active process of selective growth/elimination of dendritic arbors of RGCs driven by visual activity. Finally, our data showed that there was a power law relationship between the coverage territory and dendritic arbor density of RGCs on a cell-by-cell basis. RGCs were systematically less dense when they cover larger territories regardless of their cell type, retinal location, or developmental stage. These results suggest that a general structural design principle directs the vision-dependent patterning of RGC dendrites.

  3. Information Fusion for Anomaly Detection with the Dendritic Cell Algorithm

    CERN Document Server

    Greensmith, Julie; Tedesco, Gianni

    2010-01-01

    Dendritic cells are antigen presenting cells that provide a vital link between the innate and adaptive immune system, providing the initial detection of pathogenic invaders. Research into this family of cells has revealed that they perform information fusion which directs immune responses. We have derived a Dendritic Cell Algorithm based on the functionality of these cells, by modelling the biological signals and differentiation pathways to build a control mechanism for an artificial immune system. We present algorithmic details in addition to experimental results, when the algorithm was applied to anomaly detection for the detection of port scans. The results show the Dendritic Cell Algorithm is sucessful at detecting port scans.

  4. Chitosan microspheres with an extracellular matrix-mimicking nanofibrous structure as cell-carrier building blocks for bottom-up cartilage tissue engineering

    Science.gov (United States)

    Zhou, Yong; Gao, Huai-Ling; Shen, Li-Li; Pan, Zhao; Mao, Li-Bo; Wu, Tao; He, Jia-Cai; Zou, Duo-Hong; Zhang, Zhi-Yuan; Yu, Shu-Hong

    2015-12-01

    Scaffolds for tissue engineering (TE) which closely mimic the physicochemical properties of the natural extracellular matrix (ECM) have been proven to advantageously favor cell attachment, proliferation, migration and new tissue formation. Recently, as a valuable alternative, a bottom-up TE approach utilizing cell-loaded micrometer-scale modular components as building blocks to reconstruct a new tissue in vitro or in vivo has been proved to demonstrate a number of desirable advantages compared with the traditional bulk scaffold based top-down TE approach. Nevertheless, micro-components with an ECM-mimicking nanofibrous structure are still very scarce and highly desirable. Chitosan (CS), an accessible natural polymer, has demonstrated appealing intrinsic properties and promising application potential for TE, especially the cartilage tissue regeneration. According to this background, we report here the fabrication of chitosan microspheres with an ECM-mimicking nanofibrous structure for the first time based on a physical gelation process. By combining this physical fabrication procedure with microfluidic technology, uniform CS microspheres (CMS) with controlled nanofibrous microstructure and tunable sizes can be facilely obtained. Especially, no potentially toxic or denaturizing chemical crosslinking agent was introduced into the products. Notably, in vitro chondrocyte culture tests revealed that enhanced cell attachment and proliferation were realized, and a macroscopic 3D geometrically shaped cartilage-like composite can be easily constructed with the nanofibrous CMS (NCMS) and chondrocytes, which demonstrate significant application potential of NCMS as the bottom-up cell-carrier components for cartilage tissue engineering.Scaffolds for tissue engineering (TE) which closely mimic the physicochemical properties of the natural extracellular matrix (ECM) have been proven to advantageously favor cell attachment, proliferation, migration and new tissue formation

  5. Structural Color for Additive Manufacturing: 3D-Printed Photonic Crystals from Block Copolymers.

    Science.gov (United States)

    Boyle, Bret M; French, Tracy A; Pearson, Ryan M; McCarthy, Blaine G; Miyake, Garret M

    2017-03-28

    The incorporation of structural color into 3D printed parts is reported, presenting an alternative to the need for pigments or dyes for colored parts produced through additive manufacturing. Thermoplastic build materials composed of dendritic block copolymers were designed, synthesized, and used to additively manufacture plastic parts exhibiting structural color. The reflection properties of the photonic crystals arise from the periodic nanostructure formed through block copolymer self-assembly during polymer processing. The wavelength of reflected light could be tuned across the visible spectrum by synthetically controlling the block copolymer molecular weight and manufacture parts that reflected violet, green, or orange light with the capacity to serve as selective optical filters and light guides.

  6. Time-resolved single-photon detection module based on silicon photomultiplier: A novel building block for time-correlated measurement systems

    Science.gov (United States)

    Martinenghi, E.; Di Sieno, L.; Contini, D.; Sanzaro, M.; Pifferi, A.; Dalla Mora, A.

    2016-07-01

    We present the design and preliminary characterization of the first detection module based on Silicon Photomultiplier (SiPM) tailored for single-photon timing applications. The aim of this work is to demonstrate, thanks to the design of a suitable module, the possibility to easily exploit SiPM in many applications as an interesting detector featuring large active area, similarly to photomultipliers tubes, but keeping the advantages of solid state detectors (high quantum efficiency, low cost, compactness, robustness, low bias voltage, and insensitiveness to magnetic field). The module integrates a cooled SiPM with a total photosensitive area of 1 mm2 together with the suitable avalanche signal read-out circuit, the signal conditioning, the biasing electronics, and a Peltier cooler driver for thermal stabilization. It is able to extract the single-photon timing information with resolution better than 100 ps full-width at half maximum. We verified the effective stabilization in response to external thermal perturbations, thus proving the complete insensitivity of the module to environment temperature variations, which represents a fundamental parameter to profitably use the instrument for real-field applications. We also characterized the single-photon timing resolution, the background noise due to both primary dark count generation and afterpulsing, the single-photon detection efficiency, and the instrument response function shape. The proposed module can become a reliable and cost-effective building block for time-correlated single-photon counting instruments in applications requiring high collection capability of isotropic light and detection efficiency (e.g., fluorescence decay measurements or time-domain diffuse optics systems).

  7. A redox-active porous coordination network film based on a Ru complex as a building block on an ITO electrode.

    Science.gov (United States)

    Shinomiya, Takuya; Ozawa, Hiroaki; Mutoh, Yuichiro; Haga, Masa-Aki

    2013-12-01

    The combination of self-assembled monolayer (SAM) and layer-by-layer (LbL) growth methods for the construction of a surface porous film has the potential to incorporate a wide range of chemical functionalities on a solid surface. A novel redox-active Ru complex with 2,6-bis(N-pyridylbenzimidazolyl)-pyridine ligands (Ru complex 1), in which four peripheral pyridine groups act as coordination sites, was used as a building block for a porous coordination network film. By using (4-pyridyl)phenylphosphonic acid as a SAM primer layer on an ITO surface, the Ru complex 1 was immobilized by the successive reaction of PdCl2 on the ITO electrode in the LbL growth method. Multilayer growth was monitored by UV-vis spectra and cyclic voltammetry, in which the linear increases of both absorbance and the peak current were observed. This result indicated that the regular accumulation of Ru complex 1 onto the ITO surface took place. The permselectivity of the present porous coordination network structure was examined using redox-active molecular probes with different sizes and charges such as ferrocene, trimethylaminomethylferrocene, the Os bis(2,6-bis(N-methylbenzimidazolyl)-pyridine) complex, and tetrathiofulvarene (TTF). With the Os complex and cationic ferrocene, only the catalytic peak was observed as a prewave of the adsorbed Ru(II/III) peak at +0.73 V. On the other hand, the oxidation peak of ferrocene was observed around 0 V vs. Fc(+)/Fc even for nine-layered films in addition to the adsorbed Ru(II/III) peak. From these results, not only molecular size but also electrostatic interaction plays an important role in the permeation into the Ru complex 1 porous network film.

  8. Time-resolved single-photon detection module based on silicon photomultiplier: A novel building block for time-correlated measurement systems.

    Science.gov (United States)

    Martinenghi, E; Di Sieno, L; Contini, D; Sanzaro, M; Pifferi, A; Dalla Mora, A

    2016-07-01

    We present the design and preliminary characterization of the first detection module based on Silicon Photomultiplier (SiPM) tailored for single-photon timing applications. The aim of this work is to demonstrate, thanks to the design of a suitable module, the possibility to easily exploit SiPM in many applications as an interesting detector featuring large active area, similarly to photomultipliers tubes, but keeping the advantages of solid state detectors (high quantum efficiency, low cost, compactness, robustness, low bias voltage, and insensitiveness to magnetic field). The module integrates a cooled SiPM with a total photosensitive area of 1 mm(2) together with the suitable avalanche signal read-out circuit, the signal conditioning, the biasing electronics, and a Peltier cooler driver for thermal stabilization. It is able to extract the single-photon timing information with resolution better than 100 ps full-width at half maximum. We verified the effective stabilization in response to external thermal perturbations, thus proving the complete insensitivity of the module to environment temperature variations, which represents a fundamental parameter to profitably use the instrument for real-field applications. We also characterized the single-photon timing resolution, the background noise due to both primary dark count generation and afterpulsing, the single-photon detection efficiency, and the instrument response function shape. The proposed module can become a reliable and cost-effective building block for time-correlated single-photon counting instruments in applications requiring high collection capability of isotropic light and detection efficiency (e.g., fluorescence decay measurements or time-domain diffuse optics systems).

  9. Time-resolved single-photon detection module based on silicon photomultiplier: A novel building block for time-correlated measurement systems

    Energy Technology Data Exchange (ETDEWEB)

    Martinenghi, E., E-mail: edoardo.martinenghi@polimi.it; Di Sieno, L.; Contini, D.; Dalla Mora, A. [Dipartimento di Fisica, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy); Sanzaro, M. [Dipartimento di Elettronica, Informazione e Bioingegneria, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy); Pifferi, A. [Dipartimento di Fisica, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy); Istituto di Fotonica e Nanotecnologie, Consiglio Nazionale delle Ricerche, Piazza Leonardo da Vinci 32, 20133 Milano (Italy)

    2016-07-15

    We present the design and preliminary characterization of the first detection module based on Silicon Photomultiplier (SiPM) tailored for single-photon timing applications. The aim of this work is to demonstrate, thanks to the design of a suitable module, the possibility to easily exploit SiPM in many applications as an interesting detector featuring large active area, similarly to photomultipliers tubes, but keeping the advantages of solid state detectors (high quantum efficiency, low cost, compactness, robustness, low bias voltage, and insensitiveness to magnetic field). The module integrates a cooled SiPM with a total photosensitive area of 1 mm{sup 2} together with the suitable avalanche signal read-out circuit, the signal conditioning, the biasing electronics, and a Peltier cooler driver for thermal stabilization. It is able to extract the single-photon timing information with resolution better than 100 ps full-width at half maximum. We verified the effective stabilization in response to external thermal perturbations, thus proving the complete insensitivity of the module to environment temperature variations, which represents a fundamental parameter to profitably use the instrument for real-field applications. We also characterized the single-photon timing resolution, the background noise due to both primary dark count generation and afterpulsing, the single-photon detection efficiency, and the instrument response function shape. The proposed module can become a reliable and cost-effective building block for time-correlated single-photon counting instruments in applications requiring high collection capability of isotropic light and detection efficiency (e.g., fluorescence decay measurements or time-domain diffuse optics systems).

  10. Observed Faraday Effects in Damped Lyα Absorbers and Lyman Limit Systems: The Magnetized Environment of Galactic Building Blocks at Redshift = 2

    Science.gov (United States)

    Farnes, J. S.; Rudnick, L.; Gaensler, B. M.; Haverkorn, M.; O'Sullivan, S. P.; Curran, S. J.

    2017-06-01

    Protogalactic environments are typically identified using quasar absorption lines and can manifest as Damped Lyman-alpha Absorbers (DLAs) and Lyman Limit Systems (LLSs). We use radio observations of Faraday effects to test whether these galactic building blocks host a magnetized medium, by combining DLA and LLS detections with 1.4 GHz polarization data from the NRAO VLA Sky Survey (NVSS). We obtain a control, a DLA, and an LLS sample consisting of 114, 19, and 27 lines of sight, respectively. Using a Bayesian framework and weakly informative priors, we are unable to detect either coherent or random magnetic fields in DLAs: the regular coherent fields must be ≤slant 2.8 μG, and the lack of depolarization suggests the weakly magnetized gas in DLAs is non-turbulent and quiescent. However, we find a mild suggestive indication that LLSs have coherent magnetic fields, with a 71.5% probability that LLSs have higher | {RM}| than a control, although this is sensitive to the redshift distribution. We also find a strong indication that LLSs host random magnetic fields, with a 95.5% probability that LLS lines of sight have lower polarized fractions than a control. The regular coherent fields within the LLSs must be ≤slant 2.4 μG, and the magnetized gas must be highly turbulent with a typical turbulent length scale on the order of ≈5-20 pc. Our results are consistent with the standard dynamo paradigm, whereby magnetism in protogalaxies increases in coherence over cosmic time, and with a hierarchical galaxy formation scenario, with the DLAs and LLSs exploring different stages of magnetic field evolution in galaxies.

  11. 3,3'-Dinitroamino-4,4'-azoxyfurazan and its derivatives: an assembly of diverse N-O building blocks for high-performance energetic materials.

    Science.gov (United States)

    Zhang, Jiaheng; Shreeve, Jean'ne M

    2014-03-19

    On the basis of a design strategy that results in the assembly of diverse N-O building blocks leading to energetic materials, 3,3'-dinitroamino-4,4'-azoxyfurazan and its nitrogen-rich salts were obtained and fully characterized via spectral and elemental analyses. Oxone (potassium peroxomonosulfate) is an efficient oxidizing agent for introducing the azoxy N-oxide functionality into the furazan backbone, giving a straightforward and low-cost synthetic route. On the basis of heats of formation calculated with Gaussian 03 and combined with experimentally determined densities, energetic properties (detonation velocity, pressure and specific impulse) were obtained using the EXPLO v6.01 program. These new molecules exhibit high density, moderate to good thermal stability, acceptable impact and friction sensitivities, and excellent detonation properties, which suggest potential applications as energetic materials. Interestingly, 3,3'-dinitroamino-4,4'-azoxyfurazan (4) has the highest calculated crystal density of 2.02 g cm(-3) at 173 K (gas pycnometer measured density is 1.96 g cm(-3) at 298 K) for N-oxide energetic compounds yet reported. Another promising compound is the hydroxylammonium salt (6), which has four different kinds of N-O moieties and a detonation performance superior to those of 1,3,5,7-tetranitrotetraazacyclooctane (HMX), and 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazatetracyclododecane (CL-20). Furthermore, computational results, viz., NBO charges and ESP, also support the superior qualities of the newly prepared compounds and the design strategy.

  12. INTRODUCING NH2 ONTO POLYMERIC FILMS VIA PHOTO-INDUCED C-H BOND TRANSFORMATION WITH PHENOL DERIVATIVES AS BUILDING BLOCKS

    Institute of Scientific and Technical Information of China (English)

    Jing Xu; Yu-hong Ma; Jing-yi Xie; Wan-tai Yang

    2012-01-01

    A one-step process to introduce both the aromatic and aliphatic primary amino groups with high chemoselectivity was developed.Triplet state acetone abstracts the hydrogen atoms from both the C--H bond of the polymeric film substrate and the OH bond of phenol which is the building block and the amino group carrier.As a result,two kinds of free radicals,confined carbon-centered chain radicals of the polymer substrate and mobile oxygen-centered phenoxy radicals,were generated.Then the C-O bonds were formed by the coupling reaction between these two kinds of free radicals,p-Tyramine and p-aminophenol were used as amino carriers.The successful introduction of amino groups onto LDPE,BOPP and PET film substrates was demonstrated by measurements of water contract angle (CA),ultraviolet spectra (UV),X-ray photoelectron spectroscopy (XPS) and fluorescent microscopy.The processing factors,such as the UV-light intensity and irradiation time,concentrations of p-tyramine and p-aminophenol,and the ratio of acetone/water were investigated.The optimized process parameters are as follows:UV light intensity 9500 μW/cm2; irradiation time 18 min for BOPP and LDPE,22 rmin for PET; the ratio of acetone/water =1; and concentration ofp-tyramine and p-aminophenol 15% for BOPP and LDPE,1% for PET.Based on the UV absorbance,the amino groups on the polymeric substrates were estimated to be in the range of 6.3 x 10-6-9.5 x 10-6 mmol/mm2.

  13. Chemical synthesis of Fe{sub 3}O{sub 4}–graphene oxide nanohybrids as building blocks for magnetic and conductive membranes

    Energy Technology Data Exchange (ETDEWEB)

    Thu, Tran Viet, E-mail: tranvietthu@gmail.com [Electronics-Inspired Interdisciplinary Research Institute, Toyohashi University of Technology, 1-1 Hibarigaoka, Tempaku, Toyohashi 441-8580, Aichi (Japan); Sandhu, Adarsh [Electronics-Inspired Interdisciplinary Research Institute, Toyohashi University of Technology, 1-1 Hibarigaoka, Tempaku, Toyohashi 441-8580, Aichi (Japan); Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology, 1-1 Hibarigaoka, Tempaku, Toyohashi 441-8580, Aichi (Japan)

    2014-11-15

    Graphical abstract: - Highlights: • Fe{sub 3}O{sub 4} nanocrystals are uniformly grown on graphene oxide (GO) at high density. • GO sheets act as physical substrate and surfactants for the growth of Fe{sub 3}O{sub 4}. • The saturation magnetization of the Fe{sub 3}O{sub 4}–GO hybrids is controlled. • Conductive membrane is formed by filtration of Fe{sub 3}O{sub 4}–GO suspension. - Abstract: We have developed a facile and scalable method for synthesising superparamagnetic Fe{sub 3}O{sub 4} nanocrystals (NCs) anchored on graphene oxide (GO) sheets by a co-precipitation reaction. As-synthesized Fe{sub 3}O{sub 4}–GO nanohybrids (NHs) were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, atomic force microscopy, field-emission scanning electron microscopy, transmission electron microscopy, and vibrating sample magnetometer. Fe{sub 3}O{sub 4} NCs with a narrow size distribution (4.5 ± 0.6 nm) were uniformly decorated over GO surface at high density. The GO sheets act as two-dimensional substrates and surfactants for the growth and adhesion of Fe{sub 3}O{sub 4} NCs. Structural changes induced in the GO due to Fe{sub 3}O{sub 4} decoration were clearly observed using Raman spectroscopy. The magnetic properties of Fe{sub 3}O{sub 4}–GO NHs could be tuned by varying Fe{sub 3}O{sub 4} content and a saturation magnetization as high as 39.2 emu g{sup −1} was achieved. Fe{sub 3}O{sub 4}–GO NHs in their colloidal suspension were used as building blocks to fabricate magnetic and electrically conductive membranes by a vacuum-assisted assembly process.

  14. Models of neocortical layer 5b pyramidal cells capturing a wide range of dendritic and perisomatic active properties.

    Directory of Open Access Journals (Sweden)

    Etay Hay

    2011-07-01

    Full Text Available The thick-tufted layer 5b pyramidal cell extends its dendritic tree to all six layers of the mammalian neocortex and serves as a major building block for the cortical column. L5b pyramidal cells have been the subject of extensive experimental and modeling studies, yet conductance-based models of these cells that faithfully reproduce both their perisomatic Na(+-spiking behavior as well as key dendritic active properties, including Ca(2+ spikes and back-propagating action potentials, are still lacking. Based on a large body of experimental recordings from both the soma and dendrites of L5b pyramidal cells in adult rats, we characterized key features of the somatic and dendritic firing and quantified their statistics. We used these features to constrain the density of a set of ion channels over the soma and dendritic surface via multi-objective optimization with an evolutionary algorithm, thus generating a set of detailed conductance-based models that faithfully replicate the back-propagating action potential activated Ca(2+ spike firing and the perisomatic firing response to current steps, as well as the experimental variability of the properties. Furthermore, we show a useful way to analyze model parameters with our sets of models, which enabled us to identify some of the mechanisms responsible for the dynamic properties of L5b pyramidal cells as well as mechanisms that are sensitive to morphological changes. This automated framework can be used to develop a database of faithful models for other neuron types. The models we present provide several experimentally-testable predictions and can serve as a powerful tool for theoretical investigations of the contribution of single-cell dynamics to network activity and its computational capabilities.

  15. Optimization principles of dendritic structure

    Directory of Open Access Journals (Sweden)

    Borst Alexander

    2007-06-01

    Full Text Available Abstract Background Dendrites are the most conspicuous feature of neurons. However, the principles determining their structure are poorly understood. By employing cable theory and, for the first time, graph theory, we describe dendritic anatomy solely on the basis of optimizing synaptic efficacy with minimal resources. Results We show that dendritic branching topology can be well described by minimizing the path length from the neuron's dendritic root to each of its synaptic inputs while constraining the total length of wiring. Tapering of diameter toward the dendrite tip – a feature of many neurons – optimizes charge transfer from all dendritic synapses to the dendritic root while housekeeping the amount of dendrite volume. As an example, we show how dendrites of fly neurons can be closely reconstructed based on these two principles alone.

  16. Structure simulation in unidirectionally solidified turbine blade by dendrite envelope tracking model(Ⅰ): numerical modeling

    Institute of Scientific and Technical Information of China (English)

    WANG Tong-min; I. Ohnaka; H.Yasuda; SU Yan-qing; GUO Jing-jie

    2006-01-01

    A 3D dendrite envelope tracking model was developed for estimating the solidification structure of unidirectionally solidified turbine blade. The normal vector of dendrite envelope was estimated by the gradient of dendrite volume fraction, and growth velocity of the dendrite envelope (dendrite tips) was calculated with considering the anisotropy of grain growth. The solute redistribution at dendrite envelope was calculated by introducing an effective solute partition coefficient(ke). Simulation results show that the solute-build-up due to the rejection at envelope affects grain competition and consequently the solidification structure. The lower value of ke leads to more waved dendrite growth front and higher solute rejection. The model was applied to predict the structure of turbine-blade-shape samples showing good ability to reproduce the columnar and single grain structures.

  17. RAB-10 Regulates Dendritic Branching by Balancing Dendritic Transport.

    Directory of Open Access Journals (Sweden)

    Caitlin A Taylor

    2015-12-01

    Full Text Available The construction of a large dendritic arbor requires robust growth and the precise delivery of membrane and protein cargoes to specific subcellular regions of the developing dendrite. How the microtubule-based vesicular trafficking and sorting systems are regulated to distribute these dendritic development factors throughout the dendrite is not well understood. Here we identify the small GTPase RAB-10 and the exocyst complex as critical regulators of dendrite morphogenesis and patterning in the C. elegans sensory neuron PVD. In rab-10 mutants, PVD dendritic branches are reduced in the posterior region of the cell but are excessive in the distal anterior region of the cell. We also demonstrate that the dendritic branch distribution within PVD depends on the balance between the molecular motors kinesin-1/UNC-116 and dynein, and we propose that RAB-10 regulates dendrite morphology by balancing the activity of these motors to appropriately distribute branching factors, including the transmembrane receptor DMA-1.

  18. Three-dimensional roselike α-Ni(OH){sub 2} assembled from nanosheet building blocks for non-enzymatic glucose detection

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Pan [College of Materials Science and Metallurgy Engineering, Guizhou University, Guiyang 550025 (China); Lei, Yuting [College of Life Sciences, Guizhou University, Guiyang 550025 (China); Lu, Shengjun, E-mail: shjlu71@163.com [College of Materials Science and Metallurgy Engineering, Guizhou University, Guiyang 550025 (China); Wang, Qing [College of Materials Science and Metallurgy Engineering, Guizhou University, Guiyang 550025 (China); Liu, Qibin, E-mail: qbliu2@263.net [Guizhou Key Laboratory for Microstructure and Strength of Materials, Guiyang, Guizhou 550003 (China)

    2015-06-23

    Highlights: • High-quality roselike α-Ni(OH){sub 2} can be obtained via a self-assembly process with the assistance of PEG. • The Ni(OH){sub 2}-RS have bimodal porosity in the mesoporous regime with large specific surface areas. • This work developed a highly sensitive biosensor based on Ni(OH){sub 2}-RS for the determination of glucose. • This biosensor shows a wide linear range of 0.87 μM–10.53 mM and a lower detection limit of 0.08 μM. - Abstract: Glucose detection plays very important roles in diagnostics and management of diabetes. The search for novel catalytic materials with appropriate architectures is the key step in the fabrication of highly sensitive glucose sensors. In this work, α-Ni(OH){sub 2} roselike structures (Ni(OH){sub 2}-RS) assembled from nanosheet building blocks were successfully synthesized by a hydrothermal method through the hydrolysis of nickel chloride in the mixed solvents of water and ethanol with the assistance of polyethylene glycol (PEG). The structure and morphology of the roselike α-Ni(OH){sub 2} were characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD) and N{sub 2} adsorption–desorption isotherm measurement. TEM and FE-SEM images showed that the synthesized Ni(OH){sub 2} was roselike and the size of the leaf-shaped nanosheet was about 5 nm in thickness, which leads to larger active surface areas and faster electron transfer for the detection of glucose. Compared with the bare GCE and bulk Ni(OH){sub 2}/GCE, the Ni(OH){sub 2}-RS/GCE had higher catalytic activity toward the oxidation of glucose. Under the optimal conditions, the Ni(OH){sub 2}-RS/GCE offers a variety of merits, such as a wide linear response window for glucose concentrations ranging from 0.87 μM to 10.53 mM, short response time (3 s), a lower detection limit of 0.08 μM (S/N = 3), as well as long term stability and

  19. Research on a New Thermal Insulation Block Used in Building%新型建筑保温隔热材料的实验研究

    Institute of Scientific and Technical Information of China (English)

    张明灿

    2016-01-01

    A new thermal insulation block with suitable compressive strength used in building was prepared by white carbon black(precipitated silica).White carbon black was used as a matrix,the high-belite cement clinker as a binder, carbon fiber and three-dimensional glass fiber structure as a framework,set retarding superplasticizer and expanding ad-mixture as multifunction admixture to reduce water consumption and improve the crack resistance,water as medium. Density,compressive strength and thermal conductivity at room temperature(25 ℃)and ambient pressure were meas-ured,respectively.Results show that the sample has density of 262 kg/m3 and compressive strength of 2.1 MPa.Also, at ambient pressure,the sample has thermal conductivity of 0.056 W·(m·K)at room temperature.%以白炭黑(即沉淀二氧化硅)为主要原材料,添加胶凝材料高贝利特水泥熟料后拌合,掺入膨胀剂提高抗裂性能,加入短切碳纤维干拌成混合粉料;在粉料中加入一定量的水及高性能减水剂制成混合料浆,将料浆浇筑入立体三维玻璃纤维网架模具中,制备出具有一定强度的新型建筑保温块体材料;常温(即25℃)常压下,分别检测块体材料样品的密度、抗压强度、热导率。结果表明,干燥后的块体样品平均密度为262 kg/m3、平均抗压强度为2.1 MPa、热导率为0.056 W/(m·K)。

  20. Rock blocks

    OpenAIRE

    Turner, W.

    2007-01-01

    Consider representation theory associated to symmetric groups, or to Hecke algebras in type A, or to q-Schur algebras, or to finite general linear groups in non-describing characteristic. Rock blocks are certain combinatorially defined blocks appearing in such a representation theory, first observed by R. Rouquier. Rock blocks are much more symmetric than general blocks, and every block is derived equivalent to a Rock block. Motivated by a theorem of J. Chuang and R. Kessar in the case of sym...

  1. Active properties of neuronal dendrites.

    Science.gov (United States)

    Johnston, D; Magee, J C; Colbert, C M; Cristie, B R

    1996-01-01

    Dendrites of neurons in the central nervous system are the principal sites for excitatory synaptic input. Although little is known about their function, two disparate perspectives have arisen to describe the activity patterns inherent to these diverse tree-like structures. Dendrites are thus considered either passive or active in their role in integrating synaptic inputs. This review follows the history of dendritic research from before the turn of the century to the present, with a primary focus on the hippocampus. A number of recent techniques, including high-speed fluorescence imaging and dendritic patch clamping, have provided new information and perspectives about the active properties of dendrites. The results support previous notions about the dendritic propagation of action potentials and also indicate which types of voltage-gated sodium and calcium channels are expressed and functionally active in dendrites. Possible roles for the active properties of dendrites in synaptic plasticity and integration are also discussed.

  2. Isothermal Dendritic Growth Experiment Video

    Science.gov (United States)

    1997-01-01

    This video, captured during the Isothermal Dendritic Growth Experiment (IDGE) flown on STS-87 as a part of the fourth United States Microgravity payload, shows the growth of a dendrite, and the surface solidification that occurred on the front and back windows of the growth chamber. Dendrites are tiny, tree like structures that form as metals solidify.

  3. Transport Processes in Dendritic Crystallization

    Science.gov (United States)

    Glicksman, M. E.

    1984-01-01

    Free dentritic growth refers to the unconstrained development of crystals within a supercooled melt, which is the classical dendrite problem. The development of theoretical understanding of dendritic growth and its experimental status is sketched showing that transport theory and interfacial thermodynamics (capillarity theory) are insufficient ingredients to develop a truly predictive model of dendrite formation. The convenient, but incorrect, notion of maximum velocity was used for many years to estimate the behavior of dendritic transformations until supplanted by modern dynamic stability theory. The proper combinations of transport theory and morphological stability seem to be able to predict the salient aspects of dendritic growth, especially in the neighborhood of the tip.

  4. The first bis-cyanoxime: synthesis and properties of a new versatile and accessible polydentate bifunctional building block for coordination and supramolecular chemistry.

    Science.gov (United States)

    Cheadle, Carl; Gerasimchuk, Nikolay; Barnes, Charles L; Tyukhtenko, Sergiy I; Silchenko, Svitlana

    2013-04-14

    , >2.89 Å, mostly electrostatic Tl···O contacts, involving oxygen atoms of the amide-group and the oxime-group of neighboring units. Among several possible binding modes, the coordination of the bis-cyanoxime dianion of 2 adopted in complex 4 is unusual, and evidenced its great potential as a versatile building block for coordination and supramolecular chemistry.

  5. Modification of dendritic development.

    Science.gov (United States)

    Feria-Velasco, Alfredo; del Angel, Alma Rosa; Gonzalez-Burgos, Ignacio

    2002-01-01

    Since 1890 Ramón y Cajal strongly defended the theory that dendrites and their processes and spines had a function of not just nutrient transport to the cell body, but they had an important conductive role in neural impulse transmission. He extensively discussed and supported this theory in the Volume 1 of his extraordinary book Textura del Sistema Nervioso del Hombre y de los Vertebrados. Also, Don Santiago significantly contributed to a detailed description of the various neural components of the hippocampus and cerebral cortex during development. Extensive investigation has been done in the last Century related to the functional role of these complex brain regions, and their association with learning, memory and some limbic functions. Likewise, the organization and expression of neuropsychological qualities such as memory, exploratory behavior and spatial orientation, among others, depend on the integrity and adequate functional activity of the cerebral cortex and hippocampus. It is known that brain serotonin synthesis and release depend directly and proportionally on the availability of its precursor, tryptophan (TRY). By using a chronic TRY restriction model in rats, we studied their place learning ability in correlation with the dendritic spine density of pyramidal neurons in field CA1 of the hippocampus during postnatal development. We have also reported alterations in the maturation pattern of the ability for spontaneous alternation and task performance evaluating short-term memory, as well as adverse effects on the density of dendritic spines of hippocampal CA1 field pyramidal neurons and on the dendritic arborization and the number of dendritic spines of pyramidal neurons from the third layer of the prefrontal cortex using the same model of TRY restriction. The findings obtained in these studies employing a modified Golgi method, can be interpreted as a trans-synaptic plastic response due to understimulation of serotoninergic receptors located in the

  6. Dendritic position is a major determinant of presynaptic strength.

    Science.gov (United States)

    de Jong, Arthur P H; Schmitz, Sabine K; Toonen, Ruud F G; Verhage, Matthijs

    2012-04-16

    Different regulatory principles influence synaptic coupling between neurons, including positional principles. In dendrites of pyramidal neurons, postsynaptic sensitivity depends on synapse location, with distal synapses having the highest gain. In this paper, we investigate whether similar rules exist for presynaptic terminals in mixed networks of pyramidal and dentate gyrus (DG) neurons. Unexpectedly, distal synapses had the lowest staining intensities for vesicular proteins vGlut, vGAT, Synaptotagmin, and VAMP and for many nonvesicular proteins, including Bassoon, Munc18, and Syntaxin. Concomitantly, distal synapses displayed less vesicle release upon stimulation. This dependence of presynaptic strength on dendritic position persisted after chronically blocking action potential firing and postsynaptic receptors but was markedly reduced on DG dendrites compared with pyramidal dendrites. These data reveal a novel rule, independent of neuronal activity, which regulates presynaptic strength according to dendritic position, with the strongest terminals closest to the soma. This gradient is opposite to postsynaptic gradients observed in pyramidal dendrites, and different cell types apply this rule to a different extent.

  7. Studies and mechanical properties of a new type of 'hybrid' ceramic block for buildings in structural masonry; Estudos e propriedades mecanicas de um novo tipo de bloco ceramico 'hibrido' para edificacoes em alvenarias estruturais

    Energy Technology Data Exchange (ETDEWEB)

    Camara, Cassio Freire; Gomes, Uilame Umbelino, E-mail: cfcamara@infra.ufrn.br, E-mail: umbelino@dfte.ufrn.br [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Ciencias e Engenharia de Materiais

    2012-07-01

    This paper presents the development of a hybrid ceramic block to the use of resides in the buildings executed with structural masonry. This work seeking new materials and / or products with the purpose of increasing the compressive strength of the ceramic blocks, without neglecting other properties (water absorption and linear shrinkage). After the obtained material (clay powder and crushed), the packaging (in percentages ranging from 0%, 5%, 10% and 15% substitution of crushed clay powder), the identification and measuring (weights and lengths) of the bodies of the test piece, was performed on the approach characterized by fluorescence, mineralogy and SEM of these materials as well as the characterization (SEM) of ceramic blocks after the sintering (temperature of the 900 deg C, 1000 deg C, and 1100 deg C rate with heating tax of 5{sup o}C/minute and soak for 1 hour). Then the samples were subjected to the tests (compressive strength and water absorption) and the respective calculated linear shrinkage. After conducting the analysis of the results of these tests (according to the criteria and parameters required by the ABNT NBR 15270) was found that the 'hybrid' block with the addition of 10% crushed powder obtained the best results, increasing the compressive strength at 16 % without compromising the other parameters required by the Standard. (author)

  8. Mountain building at northeastern boundary of Tibetan Plateau and craton reworking at Ordos block from joint inversion of ambient noise tomography and receiver functions

    Science.gov (United States)

    Guo, Zhen; Chen, Yongshun John

    2017-04-01

    We have obtained a high resolution 3-D crustal and uppermost mantle velocity model of the Ordos block and its surrounding areas by joint inversion of ambient noise tomography and receiver functions using seismic recordings from 320 stations. The resulting model shows wide-spread low velocity zone (Vs ≤ 3.4 km/s) in the mid-to-lower crust beneath northeastern Tibet Plateau, which may favor crustal ductile flow within the plateau. However, our model argues against the eastward crustal ductile flow beneath the Qinling belt from the Tibetan Plateau. We find high velocities in the middle part of Qinling belt which separate the low velocities in the mid-to-lower crust of the eastern Qinling belt from the low velocity zone in eastern Tibetan Plateau. More importantly, we observe significant low velocities and thickened lower crust at the Liupanshan thrust belt as the evidence for strong crustal shortening at this boundary between the northeastern Tibetan Plateau and Ordos block. The most important finding of our model is the upper mantle low velocity anomalies surrounding the Ordos block, particularly the one beneath the Trans North China Craton (TNCO) that is penetrating into the southern margin of the Ordos block for ∼100 km horizontally in the depth range of ∼70 km and at least 100 km. We propose an on-going lithospheric mantle reworking at the southernmost boundary of the Ordos block due to complicated mantle flow surrounding the Ordos block, that is, the eastward asthenospheric flow from the Tibet Plateau proposed by recent SKS study and mantle upwelling beneath the TNCO from mantle transition zone induced by the stagnant slabs of the subducted Pacific plate.

  9. Ultrastrong Polyoxyzole Nanofiber Membranes for Dendrite-Proof and Heat-Resistant Battery Separators.

    Science.gov (United States)

    Hao, Xiaoming; Zhu, Jian; Jiang, Xiong; Wu, Haitao; Qiao, Jinshuo; Sun, Wang; Wang, Zhenhua; Sun, Kening

    2016-05-11

    Polymeric nanomaterials emerge as key building blocks for engineering materials in a variety of applications. In particular, the high modulus polymeric nanofibers are suitable to prepare flexible yet strong membrane separators to prevent the growth and penetration of lithium dendrites for safe and reliable high energy lithium metal-based batteries. High ionic conductance, scalability, and low cost are other required attributes of the separator important for practical implementations. Available materials so far are difficult to comply with such stringent criteria. Here, we demonstrate a high-yield exfoliation of ultrastrong poly(p-phenylene benzobisoxazole) nanofibers from the Zylon microfibers. A highly scalable blade casting process is used to assemble these nanofibers into nanoporous membranes. These membranes possess ultimate strengths of 525 MPa, Young's moduli of 20 GPa, thermal stability up to 600 °C, and impressively low ionic resistance, enabling their use as dendrite-suppressing membrane separators in electrochemical cells. With such high-performance separators, reliable lithium-metal based batteries operated at 150 °C are also demonstrated. Those polyoxyzole nanofibers would enrich the existing library of strong nanomaterials and serve as a promising material for large-scale and cost-effective safe energy storage.

  10. Two-step crystal engineering of porous nets from [Cr3(μ 3-O)(RCO2)6] and [Cu3(μ 3-Cl)(RNH2)6Cl6] molecular building blocks

    KAUST Repository

    Elsaidi, Sameh K.

    2013-01-01

    Two porous nets have been prepared via a 2-step crystal engineering approach that links decorated trigonal prismatic [Cr3(μ 3-O)(CO2)6] and [Cu3(μ 3-Cl)(RNH2)6Cl6] molecular building blocks, MBBs. tp-PMBB-5-acs-1 is a rare example of a rigid acs underlying net whereas tp-PMBB-6-stp-1, an stp underlying net, exhibits free NH2 groups in its channels and a relatively high isosteric heat of adsorption for CO2. © 2013 The Royal Society of Chemistry.

  11. Crack-controlling and Leak-prevention Technology of Small Hollow Cinder Concrete Building Block Filler Wall%炉渣混凝土空心小型砌块填充墙控裂防渗技术

    Institute of Scientific and Technical Information of China (English)

    贾华远; 孙建军; 孙春霞

    2001-01-01

    Some technical problems such as hollowness, crack, leak of small building block filler wall containing light aggregates such as cinder will be solved with some technical improvements in such aspects as wall structure, masonry method, plastering method and so on.%炉渣等轻集料空心小型砌块填充墙须通过墙体构造、砌筑工艺、抹灰工艺诸方面的技术进步,方可解决墙体空、裂、渗的技术难题。

  12. Population Blocks.

    Science.gov (United States)

    Smith, Martin H.

    1992-01-01

    Describes an educational game called "Population Blocks" that is designed to illustrate the concept of exponential growth of the human population and some potential effects of overpopulation. The game material consists of wooden blocks; 18 blocks are painted green (representing land), 7 are painted blue (representing water); and the remaining…

  13. Population Blocks.

    Science.gov (United States)

    Smith, Martin H.

    1992-01-01

    Describes an educational game called "Population Blocks" that is designed to illustrate the concept of exponential growth of the human population and some potential effects of overpopulation. The game material consists of wooden blocks; 18 blocks are painted green (representing land), 7 are painted blue (representing water); and the remaining…

  14. Reactive oxygen species are involved in BMP-induced dendritic growth in cultured rat sympathetic neurons.

    Science.gov (United States)

    Chandrasekaran, Vidya; Lea, Charlotte; Sosa, Jose Carlo; Higgins, Dennis; Lein, Pamela J

    2015-07-01

    Previous studies have shown that bone morphogenetic proteins (BMPs) promote dendritic growth in sympathetic neurons; however, the downstream signaling molecules that mediate the dendrite promoting activity of BMPs are not well characterized. Here we test the hypothesis that reactive oxygen species (ROS)-mediated signaling links BMP receptor activation to dendritic growth. In cultured rat sympathetic neurons, exposure to any of the three mechanistically distinct antioxidants, diphenylene iodinium (DPI), nordihydroguaiaretic acid (NGA) or desferroxamine (DFO), blocked de novo BMP-induced dendritic growth. Addition of DPI to cultures previously induced with BMP to extend dendrites caused dendritic retraction while DFO and NGA prevented further growth of dendrites. The inhibition of the dendrite promoting activity of BMPs by antioxidants was concentration-dependent and occurred without altering axonal growth or neuronal cell survival. Antioxidant treatment did not block BMP activation of SMAD 1,5 as determined by nuclear localization of these SMADs. While BMP treatment did not cause a detectable increase in intracellular ROS in cultured sympathetic neurons as assessed using fluorescent indicator dyes, BMP treatment increased the oxygen consumption rate in cultured sympathetic neurons as determined using the Seahorse XF24 Analyzer, suggesting increased mitochondrial activity. In addition, BMPs upregulated expression of NADPH oxidase 2 (NOX2) and either pharmacological inhibition or siRNA knockdown of NOX2 significantly decreased BMP-7 induced dendritic growth. Collectively, these data support the hypothesis that ROS are involved in the downstream signaling events that mediate BMP7-induced dendritic growth in sympathetic neurons, and suggest that ROS-mediated signaling positively modulates dendritic complexity in peripheral neurons.

  15. E-Block: A Tangible Programming Tool with Graphical Blocks

    Directory of Open Access Journals (Sweden)

    Danli Wang

    2013-01-01

    Full Text Available This paper designs a tangible programming tool, E-Block, for children aged 5 to 9 to experience the preliminary understanding of programming by building blocks. With embedded artificial intelligence, the tool defines the programming blocks with the sensors as the input and enables children to write programs to complete the tasks in the computer. The symbol on the programming block's surface is used to help children understanding the function of each block. The sequence information is transferred to computer by microcomputers and then translated into semantic information. The system applies wireless and infrared technologies and provides user with feedbacks on both screen and programming blocks. Preliminary user studies using observation and user interview methods are shown for E-Block's prototype. The test results prove that E-Block is attractive to children and easy to learn and use. The project also highlights potential advantages of using single chip microcomputer (SCM technology to develop tangible programming tools for children.

  16. Building Numbers from Primes

    Science.gov (United States)

    Burkhart, Jerry

    2009-01-01

    Prime numbers are often described as the "building blocks" of natural numbers. This article shows how the author and his students took this idea literally by using prime factorizations to build numbers with blocks. In this activity, students explore many concepts of number theory, including the relationship between greatest common factors and…

  17. Phase field modeling of dendrite growth

    Institute of Scientific and Technical Information of China (English)

    Yutuo ZHANG; Chengzhi WANG; Dianzhong LI; Yiyi LI

    2009-01-01

    Single dendrite and multi-dendrite growth for A1-2 mol pct Si alloy during isothermal solidification are simulated by phase field method. In the case of single equiaxed dendrite growth, the secondary and the necking phenomenon can be observed. For multi-dendrite growth, there exists the competitive growth among the dendrites dur-ing solidification. As solidification proceeds, growing and coarsening of the primary arms occurs, together with the branching and coarsening of the secondary arms.When the diffusion fields of dendrite tips come into contact with those of the branches growing from the neighboring dendrites, the dendrites stop growing and being to ripen and thicken.

  18. Zitongdong Block

    Institute of Scientific and Technical Information of China (English)

    1996-01-01

    @@ The Zitongdong Block (Eastern Zitong Block) is located in the northwest of the Sichuan Basin. Tectonically, it is situated in the east part of Zitong Depression, southeast of mid-Longmenshan folded and faulted belt( as shown on Fig. 8 ), covering an area of 1 730 km2. The traffic is very convenient, the No. 108 national highway passes through the north of the block. Topographically, the area belongs to low hilly land at the elevation of 500-700 m.

  19. Regional Regulation of Purkinje Cell Dendritic Spines by Integrins and Eph/Ephrins.

    Science.gov (United States)

    Heintz, Tristan G; Eva, Richard; Fawcett, James W

    2016-01-01

    Climbing fibres and parallel fibres compete for dendritic space on Purkinje cells in the cerebellum. Normally, climbing fibres populate the proximal dendrites, where they suppress the multiple small spines typical of parallel fibres, leading to their replacement by the few large spines that contact climbing fibres. Previous work has shown that ephrins acting via EphA4 are a signal for this change in spine type and density. We have used an in vitro culture model in which to investigate the ephrin effect on Purkinje cell dendritic spines and the role of integrins in these changes. We found that integrins α3, α5 and β4 are present in many of the dendritic spines of cultured Purkinje cells. pFAK, the main downstream signalling molecule from integrins, has a similar distribution, although the intenstity of pFAK staining and the percentage of pFAK+ spines was consistently higher in the proximal dendrites. Activating integrins with Mg2+ led to an increase in the intensity of pFAK staining and an increase in the proportion of pFAK+ spines in both the proximal and distal dendrites, but no change in spine length, density or morphology. Blocking integrin binding with an RGD-containing peptide led to a reduction in spine length, with more stubby spines on both proximal and distal dendrites. Treatment of the cultures with ephrinA3-Fc chimera suppressed dendritic spines specifically on the proximal dendrites and there was also a decrease of pFAK in spines on this domain. This effect was blocked by simultaneous activation of integrins with Mn2+. We conclude that Eph/ephrin signaling regulates proximal dendritic spines in Purkinje cells by inactivating integrin downstream signalling.

  20. Gaussian curvature analysis allows for automatic block placement in multi-block hexahedral meshing.

    Science.gov (United States)

    Ramme, Austin J; Shivanna, Kiran H; Magnotta, Vincent A; Grosland, Nicole M

    2011-10-01

    Musculoskeletal finite element analysis (FEA) has been essential to research in orthopaedic biomechanics. The generation of a volumetric mesh is often the most challenging step in a FEA. Hexahedral meshing tools that are based on a multi-block approach rely on the manual placement of building blocks for their mesh generation scheme. We hypothesise that Gaussian curvature analysis could be used to automatically develop a building block structure for multi-block hexahedral mesh generation. The Automated Building Block Algorithm incorporates principles from differential geometry, combinatorics, statistical analysis and computer science to automatically generate a building block structure to represent a given surface without prior information. We have applied this algorithm to 29 bones of varying geometries and successfully generated a usable mesh in all cases. This work represents a significant advancement in automating the definition of building blocks.