WorldWideScience

Sample records for dendrite-shaped cuo hollow

  1. Electrochemical properties of CuO hollow nanopowders prepared from formless Cu–C composite via nanoscale Kirkendall diffusion process

    Energy Technology Data Exchange (ETDEWEB)

    Won, Jong Min [Department of Materials Science and Engineering, Korea University, Anam-Dong, Seongbuk-Gu, Seoul 136-713 (Korea, Republic of); Kim, Jong Hwa [Daegu Center, Korea Basic Science Institute, 80 Daehakro Bukgu, Daegu 702-701 (Korea, Republic of); Choi, Yun Ju [Suncheon Center, Korea Basic Science Institute, Suncheon 540-742 (Korea, Republic of); Cho, Jung Sang [Department of Materials Science and Engineering, Korea University, Anam-Dong, Seongbuk-Gu, Seoul 136-713 (Korea, Republic of); Kang, Yun Chan, E-mail: yckang@korea.ac.kr [Department of Materials Science and Engineering, Korea University, Anam-Dong, Seongbuk-Gu, Seoul 136-713 (Korea, Republic of)

    2016-06-25

    Hollow CuO nanopowders are prepared using a simple spray drying process that relied on nanoscale Kirkendall diffusion; these nanopowders have potential applications in lithium-ion batteries. Citric acid is used as both the carbon source material and chelating agent and plays a key role in the preparation of the hollow nanopowders. The formless Cu–C composite that formed as an intermediate product transforms into slightly aggregated CuO hollow nanopowders after post-treatment at 300 and 400 °C under an air atmosphere. The CuO hollow nanopowders exhibit higher initial discharge capacities and better cycling performances than those of the filled-structured CuO nanopowders, which are prepared at a post-treatment temperature of 500 °C under an air atmosphere. The discharge capacities of the CuO nanopowders post-treated at 300, 400, and 500 °C for the 150{sup th} cycle at a current density of 1 A g{sup −1} are 793, 632, and 464 mA h g{sup −1}, respectively, and their capacity retentions calculated from the maximum discharge capacities are 88, 80, and 73%, respectively. The CuO nanopowders with hollow structures exhibit better structural stability for repeated lithium insertion and desertion processes than those with filled structures. - Highlights: • Hollow CuO nanopowders are prepared using a simple spray drying process. • Cu–C composite transforms into CuO hollow nanopowders by Kirkendall diffusion. • Hollow CuO nanopowders show good electrochemical properties for lithium-ion storage.

  2. Hollow CuO nanospheres uniformly anchored on porous Si nanowires: preparation and their potential use as electrochemical sensors

    Science.gov (United States)

    Guo, Zheng; Seol, Myeong-Lok; Kim, Moon-Seok; Ahn, Jae-Hyuk; Choi, Yang-Kyu; Liu, Jin-Huai; Huang, Xing-Jiu

    2012-11-01

    Hollow CuO nanospheres have been prepared via a reduction reaction of copper ions on porous Si nanowires combined with calcination in air and uniformly anchored on their surfaces. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) were employed to characterize and analyze as-synthesized samples. The results reveal that Si nanowires fabricated from heavily doped Si wafer are formed with a meso-porous structure by an Ag-assisted etching approach, and Cu nanoparticles are formed and uniformly decorated on the Si nanowires through a reaction of copper ions reduced by silicon. After annealing in air, Cu nanoparticles are in situ oxidized and transformed into CuO, leading to the formation of hollow nanospheres because of the Kirkendall effect. The diameter size of as-prepared CuO hollow spheres anchored on porous Si nanowires is mainly around 30 nm. Finally, in order to illuminate the advantages of this novel hybrid nanostructure of nanosized hollow spheres supported on porous nanowires, its electrochemical sensing performance to hydrazine as an example has been further investigated. The results confirm that it is a good potential application to detect hydrazine.Hollow CuO nanospheres have been prepared via a reduction reaction of copper ions on porous Si nanowires combined with calcination in air and uniformly anchored on their surfaces. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) were employed to characterize and analyze as-synthesized samples. The results reveal that Si nanowires fabricated from heavily doped Si wafer are formed with a meso-porous structure by an Ag-assisted etching approach, and Cu nanoparticles are formed and uniformly decorated on the Si nanowires through a reaction of copper ions reduced by silicon. After annealing in air, Cu nanoparticles are in situ oxidized and transformed into CuO, leading to the

  3. Novel bamboo leaf shaped CuO nanorod@hollow carbon fibers derived from plant biomass for efficient and nonenzymatic glucose detection.

    Science.gov (United States)

    Li, Mian; Zhao, Zheng; Liu, Xiaotian; Xiong, Yueping; Han, Ce; Zhang, Yufan; Bo, Xiangjie; Guo, Liping

    2015-09-21

    The present paper reports on the preparation of novel bamboo leaf shaped CuO nanorod dispersed hollow carbon fibers (denoted as CuO NR@PCFs). Specially, the new-type hollow carbon fibers (containing abundant micro/meso/macropores and a large specific surface area) were prepared only by simple and fast pyrolysis of the natural product catkins without using any template or surfactant. Meanwhile, a facile method was used to prepare the bamboo leaf shaped CuO nanorod covered PCFs. Thanks to the abundant micro/meso/macropores, large specific surface area, and excellent electrical conduction efficiency of the PCF matrix, the as-prepared CuO NR@PCFs could also afford more catalytic sites, show more excellent reactant transport efficiency, and display more excellent electron transport rates compared with those for the pure CuO balls. Above all, these advantages will result in the excellent oxidation and detection efficiency of the CuO NR@PCF sample to glucose. Electrochemical measurements reveal that the CuO NR@PCF modified electrode can directly catalyze glucose oxidation and display an enhanced current response compared with the pure CuO balls (such as a response time within 4 s, wide linear ranges of 5 × 10(-3)-0.8 mM and 0.8-8.5 mM, good reproducibility, considerable stability, and excellent anti-interference to electroactive molecules and Cl(-)). The superior catalytic activity and selectivity make the CuO NR@PCF catalyst very promising for application in direct detection of glucose.

  4. High selectivity of a CuO modified hollow SnO2 nanofiber gas sensor to H2S at low temperature

    Science.gov (United States)

    Yang, Jiejie; Gao, Chaojun; Yang, Hui; Wang, Xinchang; Jia, Jianfeng

    2017-08-01

    CuO modified hollow SnO2 nanofibers with large specific surface area were successfully synthesized via a simple two-step process, using the electrospinning method and hydrothermal technique. Gas-sensing experiments on hierarchically CuO modified SnO2 hollow nanofibers displayed higher sensitivity and selectivity to H2S gas at lower operating temperatures compared with unmodified hollow SnO2 nanofibers. At the optimal operating temperature of 125 °C, the highest response value to 10 ppm H2S gas reached 410. Response time decreased when the concentration of H2S increased. It is almost no response to other gases when the operating temperature falls below 200 °C. The specific interaction between H2S gas and the CuO nanoparticles, as well as the amplifier effect on the gas response by the p-n junctions, strongly enhances the selectivity to H2S gas at a lower operating temperature.

  5. Designed synthesis of MOx (M = Zn, Fe, Sn, Ni, Mn, Co, Ce, Mg, Ag), Pt, and Au nanoparticles supported on hierarchical CuO hollow structures.

    Science.gov (United States)

    Zhang, Zailei; Jung, Ji Chul; Yan, Ning

    2016-12-01

    Despite intensive research into support substrates for the dispersal of nanoparticles and their applications, there has been a lack of general methods to produce metal oxide hollow substrates supporting a wide range of metal and metal oxides. Herein, a synthetic protocol for the preparation of CuO hollow structure-supported MOx (M = Zn, Fe, Ni, Sn, Mn, Co, Ce, Mg, and Ag) and noble metals (Pt and Au) with the desired properties and shell structure, such as CuO/Fe2O3, CuO/ZnO, CuO/SnO2, CuO/MgO, CuO/NiO, CuO/Mn2O3, CuO/CoO, CuO/CeO2, CuO/Ag2O, CuO/Pt, CuO/Au hollow cubes, CuO/ZnO double-shell hollow cubes, CuO/SnO2 double-shell hollow octahedra, CuO/SnO2/Fe2O3 and CuO/Mn2O3/NiO double-shell hollow cubes, was developed based on controlled calcination and etching. These hybrid hollow structures were employed not only as support substrates but also as active constituents for catalytic reactions. As an example, we demonstrated that CuO/ZnO hollow cubes are remarkably efficient in converting solid chitin biomass to liquid chemicals in methanol. In addition, CuO/ZnO double-shell hollow cubes were highly effective in the oxidation of benzyl alcohol in the presence of H2O2, whereas CuO/Pt and CuO/Au hollow cubes promoted the oxidation of benzyl alcohol in pure O2. The strategy developed in this work extends the controllable fabrication of high-quality CuO hollow structure-supported nanoparticles using various compositions and shell structures, paving the way to the exploration and systematic comparison of these materials in a wider range of applications.

  6. Biofilms Benefiting Plants Exposed to ZnO and CuO Nanoparticles Studied with a Root-Mimetic Hollow Fiber Membrane.

    Science.gov (United States)

    Bonebrake, Michelle; Anderson, Kaitlyn; Valiente, Jonathan; Jacobson, Astrid; McLean, Joan E; Anderson, Anne; Britt, David W

    2017-10-02

    Plants exist with a consortium of microbes that influence plant health, including responses to biotic and abiotic stress. While nanoparticle (NP)-plant interactions are increasingly studied, the effect of NPs on the plant microbiome is less researched. Here a root-mimetic hollow fiber membrane (HFM) is presented for generating biofilms of plant-associated microbes nurtured by artificial root exudates (AREs) to correlate exudate composition with biofilm formation and response to NPs. Two microbial isolates from field-grown wheat, a bacillus endophyte and a pseudomonad root surface colonizer, were examined on HFMs fed with AREs varying in N and C composition. Bacterial morphology and biofilm architecture were characterized using scanning electron microscopy (SEM) and atomic force microscopy (AFM) and responses to CuO and ZnO NP challenges of 300 mg/L evaluated. The bacillus isolate sparsely colonized the HFM. In contrast, the pseudomonad formed robust biofilms within 3 days. Dependent on nutrient sources, the biofilm cells produced extensive extracellular polymeric substances (EPS) and large intracellular granules. Pseudomonad biofilms were minimally affected by ZnO NPs. CuO NPs, when introduced before biofilm maturation, strongly reduced biofilm formation. The findings demonstrate the utility of the HFM root-mimetic to study rhizoexudate influence on biofilms of root-colonizing microbes but without active plant metabolism. The results will allow better understanding of how microbe-rhizoexudate-NP interactions affect microbial and plant health.

  7. A model for grain growth based on the novel description of dendrite shape

    Directory of Open Access Journals (Sweden)

    O. Wodo

    2007-12-01

    Full Text Available We use novel description of dendritic shape in the micro solid phase growth model. The model describes evolution of both primary solid solution dendrite and eutectic that forms between arms and grains in the last stage of solidification. Obtained results show that our approach can be used in grain growth model to determine more reliable eutectic distribution. In the paper no kinetics connected with the eutectic transformation is taken into account. However, this does not affect the eutectic distribution because at the beginning of eutectic reaction all liquid phase was assumed to fully transform into eutectic. Results for solid phase growth model based on this description are presented. The obtained results of eutectic distribution are especially important in the hypoeutectic alloy solidification case, where the eutectic grains grow between formed solid solution grains. Thus, the distribution of solid solution grain becomes crucial due to its influence on the delay in solid fraction increase of eutectic grains.

  8. Azide-Alkyne Huisgen [3+2] Cycloaddition Using CuO Nanoparticles

    Directory of Open Access Journals (Sweden)

    Hyunjoon Song

    2012-11-01

    Full Text Available Recent developments in the synthesis of CuO nanoparticles (NPs and their application to the [3+2] cycloaddition of azides with terminal alkynes are reviewed. With respect to the importance of click chemistry, CuO hollow NPs, CuO hollow NPs on acetylene black, water-soluble double-hydrophilic block copolymer (DHBC nanoreactors and ZnO–CuO hybrid NPs were synthesized. Non-conventional energy sources such as microwaves and ultrasound were also applied to these click reactions, and good catalytic activity with high regioselectivity was observed. CuO hollow NPs on acetylene black can be recycled nine times without any loss of activity, and water-soluble DHBC nanoreactors have been developed for an environmentally friendly process.

  9. a Reexamination of the Red Band of CuO: Analysis of the [16.5] ^{2}Σ^{-} - X ^{2}Π_{i} Transition of ^{63}CuO and ^{65}CuO

    Science.gov (United States)

    Harms, Jack C.; Grames, Ethan M.; Yun, Sirkhoo; Ahmed, Bushra; O'Brien, Leah C.; O'Brien, James J.

    2017-06-01

    The red band of CuO has been observed at high resolution using Intracavity Laser Spectroscopy (ILS). The red band was rotationally analyzed in 1974 by Appelblad and Lagerqvist and a portion of the band structure was assigned as the spectrum of the [16.5] A ^{2}Σ^{+} - X ^{2}Π_{i} transition. Subsequent analyses of CuO showed that the character of the A state was ^{2}Σ^{-} in character, and thus the Λ-doubling parameter, p, was inverted, and the e/f parity assignments were reversed. In this study, the spectrum of CuO was recorded in the in the regions 16,150 \\wn - 16,270 \\wn and 16,405 \\wn - 16,545 \\wn. The CuO molecules were produced in the plasma discharge of a copper hollow cathode within the cavity of a tunable dye laser, using 0.6 torr of argon as the sputter gas and a trace amount of O_2 as the source of oxygen. The plasma spectra were recorded intermittently with spectra from an external I_2 cell, and line positions from the widely used Iodine Atlas were used for calibration. In uncongested regions of the spectrum, both ^{63}CuO and ^{65}CuO were observed with appreciable intensity. The resulting spectra were rotationally analyzed for both isotopologues, fitting the data as a ^{2}Σ^{-} - ^{2}Π_{i} transition using PGOPHER. Line positions from the millimeter wave and FTIR studies of ^{63}CuO performed in the late 1990s were included in the fit to overcome potential complications due to the ambiguous parity assignments prevalent in the CuO literature. Previously unreported molecular constants were obtained from the fit for ^{65}CuO, and the constants of ^{63}CuO are determined to at least an order of magnitude greater than the results of Appelblad and Lagerqvist. Results of this analysis will be presented.

  10. Hollow microporous organic capsules

    National Research Council Canada - National Science Library

    Li, Buyi; Yang, Xinjia; Xia, Lingling; Majeed, Muhammad Irfan; Tan, Bien

    2013-01-01

    Fabrication of hollow microporous organic capsules (HMOCs) could be very useful because of their hollow and porous morphology, which combines the advantages of both microporous organic polymers and non-porous nanocapsules...

  11. Oxide Nanotube Analogues: CuO Nanobarrels

    Energy Technology Data Exchange (ETDEWEB)

    H. H. Farrell; R. D. Parra

    2011-11-01

    The principle 'form follows function' which dominated much of twentieth century architechture and industrial design has its parallel on the nanolevel in the concept of 'function follows form'. This has been realized in many technologically valuable ways on this level via nanoparticles such as nanotubes and quantum dots, for example. Now, a new material, copper oxide (CuO) nanobarrels, offers still another opportunity to exploit unusual form to obtain new functionality. Recently, CuO 'rings' on the order of 100 nm diameter have been observed experimentally by El-Azab and Liang (2003). In a separate effort, we have used first principles density functional calculations to investigate smaller, single walled CuO structures that appear to be nanotubes or nanobarrels with a square unit mesh rather than the hexagonal mesh of carbon nanotubes. These structures are unique and novel, and almost certainly will yield fascinating results when studied experimentally.

  12. Hollow dimension of modules

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    In this paper, we are interested in the following general question: Given a module Mwhich has finite hollow dimension and which has a finite collection of submodules Ki (1≤i≤n) such that M=K1+... +Kn, can we find an expression for the hollow dimension of Min terms of hollow dimensions of modules built up in some way from K1 Kn? We prove the following theorem:Let Mbe an amply supplemented module having finite hollow dimension and let Ki (1≤i≤n) be a finite collection of submodules of Msuch that M=K1+...+Kn. Then the hollow dimension h(M) of Mis the sum of the hollow dimensions of Ki (1≤i≤n) ifand only if Ki is a supplement of K1+...+Ki-1+Ki+1+...+Kn in Mfor each 1≤i≤n.

  13. Superconductivity in Zigzag CuO Chains

    Energy Technology Data Exchange (ETDEWEB)

    Berg, E.

    2010-04-06

    Superconductivity has recently been discovered in Pr{sub 2}Ba{sub 4}Cu{sub 7}O{sub 15-{delta}} with a maximum T{sub c} of about 15K. Since the CuO planes in this material are believed to be insulating, it has been proposed that the superconductivity occurs in the double (or zigzag) CuO chain layer. On phenomenological grounds we propose a theoretical interpretation of the experimental results in terms of a new phase for the zigzag chain, labelled by C{sub 1}S{sub 3/2}. This phase has a gap in the relative charge mode and a partial gap in the relative spin mode. It has gapless uniform charge and spin excitations and can have a divergent superconducting susceptibility, even for repulsive interactions. A microscopic model for the zigzag CuO chain is proposed, and on the basis of density matrix renormalization group (DMRG) and bosonization studies, we adduce evidence that supports our proposal.

  14. Mesoscale organization of CuO nanoslices: Formation of sphere

    Indian Academy of Sciences (India)

    Jun Wang; Shunxiao Zhang; Zhanshuang Li; Jia You; Piaoping Yang; Xiaoyan Jing; Milin Zhang

    2008-04-01

    The nanocrystalline CuO powders were prepared by precipitation method using Cu(NO$_{3})_{2}$ as copper raw material, water and ethanol as dispersants, and NaOH and ammonia solution as precipitates. The structure, particle size and morphology of resulting CuO powders were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The mechanism of CuO formation was discussed.

  15. Synthesis of Thermally Spherical CuO Nanoparticles

    Directory of Open Access Journals (Sweden)

    Nittaya Tamaekong

    2014-01-01

    Full Text Available Copper oxide (CuO nanoparticles were successfully synthesized by a thermal method. The CuO nanoparticles were further characterized by thermogravimetric analysis (TGA, differential thermal analysis (DTA, X-ray diffraction (XRD, scanning electron microscopy (SEM, energy dispersive X-ray spectrometry (EDS, and high resolution transmission electron microscopy (HRTEM, respectively. The specific surface area (SSABET of CuO nanoparticles was determined by nitrogen adsorption. The SSABET was found to be 99.67 m2/g (dBET of 9.5 nm. The average diameter of the spherical CuO nanoparticles was approximately 6–9 nm.

  16. Engineering Stable Hollow Capsules

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    @@ Scientists at the CAS Institute of Chemistry have been succeeded in fabricating stable hollow capsules by extending covalent layer-by-layer self-assembly(CSA)technique from 2-dimensional to 3-dimensional systems.

  17. Hollow-Fiber Clinostat

    Science.gov (United States)

    Rhodes, Percy H.; Miller, Teresa Y.; Snyder, Robert S.

    1990-01-01

    Hollow-fiber clinostat, is bioreactor used to study growth and other behavior of cells in simulated microgravity. Cells under study contained in porous hollow fiber immersed in culture medium inside vessel. Bores in hollow fiber allow exchange of gases, nutrients, and metabolic waste products between living cells and external culture media. Hollow fiber lies on axis of vessel, rotated by motor equipped with torque and speed controls. Desired temperature maintained by operating clinostat in standard tissue-culture incubator. Axis of rotation made horizontal or vertical. Designed for use with conventional methods of sterilization and sanitation to prevent contamination of specimen. Also designed for asepsis in assembly, injection of specimen, and exchange of medium.

  18. Preparation of Hollow CuO@SiO2 Spheres and Its Catalytic Performances for the NO + CO and CO Oxidation

    Science.gov (United States)

    Niu, Xiaoyu; Zhao, Tieying; Yuan, Fulong; Zhu, Yujun

    2015-03-01

    The hollow CuO@SiO2 spheres with a mean diameter of 240 nm and a thin shell layer of about 30 nm in thickness was synthesized using an inorganic SiO2 shell coating on the surface of Cu@C composite that was prepared by a two-step hydrothermal method. The obtained hollow CuO@SiO2 spheres were characterized by ICP-AES, nitrogen adsorption-desorption, SEM, TEM, XRD, H2-TPR, CO-TPR, CO-TPD and NO-TPD. The results revealed that the hollow CuO@SiO2 spheres consist of CuO uniformly inserted into SiO2 layer. The CuO@SiO2 sample exhibits particular catalytic activities for CO oxidation and NO + CO reactions compared with CuO supported on SiO2 (CuO/SiO2). The higher catalytic activity is attributed to the special hollow shell structure that possesses much more highly dispersed CuO nanocluster that can be easy toward the CO and NO adsorption and the oxidation of CO on its surface.

  19. Extraction of important electrical parameters of CuO

    Energy Technology Data Exchange (ETDEWEB)

    Serin, T. [Department of Engineering Physics, Faculty of Engineering, Ankara University, 06100 Ankara (Turkey); Yildiz, A., E-mail: yildizab@gmail.co [Department of Physics, Faculty of Science and Arts, Ahi Evran University, 40040 Kirsehir (Turkey); Horzum Sahin, S.; Serin, N. [Department of Engineering Physics, Faculty of Engineering, Ankara University, 06100 Ankara (Turkey)

    2011-02-01

    Conductivity, X-ray diffraction (XRD), optical absorption and atomic force microscopy (AFM) measurements of CuO thin film were presented. Three distinct electrical conduction contributions with discrete characteristic activation energies were observed. The applicability of various theoretical models was considered to explain results on electrical transport. We extracted important electrical parameters of CuO, which might be useful for its gas sensor applications. -- Research Highlights: {yields} The important electrical parameters of CuO were extracted. Three distinct activation contributions were observed. {yields} Above 200 K, conductivity was controlled by potential barrier. {yields} Below 200 K, conductivity was described in terms of hopping conduction.

  20. Hollow-Core Fiber Lamp

    Science.gov (United States)

    Yi, Lin (Inventor); Tjoelker, Robert L. (Inventor); Burt, Eric A. (Inventor); Huang, Shouhua (Inventor)

    2016-01-01

    Hollow-core capillary discharge lamps on the millimeter or sub-millimeter scale are provided. The hollow-core capillary discharge lamps achieve an increased light intensity ratio between 194 millimeters (useful) and 254 millimeters (useless) light than conventional lamps. The capillary discharge lamps may include a cone to increase light output. Hollow-core photonic crystal fiber (HCPCF) may also be used.

  1. Syntheses of CuO nanostructures in ionic liquids

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A simple and efficient approach is developed to fabricate single-crystalline CuO nanostructures through an ionic liquid assisted one-step low-temperature solid-state route.Both nanoparticles(5 nm in size)and nanorods(5-10 nm in diameter and 50-100 nm in length)of monoclinic CuO were obtained. These synthesized CuO nanostructures were characterized by X-ray diffraction(XRD),transmission electron microscopy(TEM),selected area electron diffraction(SAED),X-ray photoelectron spectros- copy(XPS),energy dispersive spectroscopy(EDS)and nitrogen adsorption analysis.The morpholo- gies of the nanostructures can be controlled by tuning the amount of NaOH and ionic liquids.The growth mechanism of CuO nanostructures is investigated.

  2. Syntheses of CuO nanostructures in ionic liquids

    Institute of Scientific and Technical Information of China (English)

    WANG Li; ZHAO Bin; YUAN ZhongYong; ZHANG XueJun; Wu QingDuan; CHANG LiXian; ZHENG WenJun

    2007-01-01

    A simple and efficient approach is developed to fabricate single-crystalline CuO nanostructures through an ionic liquid assisted one-step low-temperature solid-state route. Both nanoparticles (5 nm in size) and nanorods (5-10 nm in diameter and 50-100 nm in length) of monoclinic CuO were obtained. These synthesized CuO nanostructures were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), X-ray photoelectron spectroscopy (XPS), energy dispersive spectroscopy (EDS) and nitrogen adsorption analysis. The morphologies of the nanostructures can be controlled by tuning the amount of NaOH and ionic liquids. The growth mechanism of CuO nanostructures is investigated.

  3. Preparation of solar selective absorbing CuO coating for medium temperature application

    Institute of Scientific and Technical Information of China (English)

    HUANG Qunwu; WANG Yiping; LI Jinhua

    2007-01-01

    A new method of preparing CuO solar selective absorbing coating for medium temperature is presented.After pretreatment,brass was overlaid with CuO by chemical plating.The effects of reactant concentration,reaction temperature and reaction time on the absorptivity of CuO coating were investigated.The optimized condition of preparing CuO coating was obtained.The CuO coating was analyzed with X-ray photoelectron spectroscopy(XPS) and scanning electron microscopy(SEM).In order to prolong the period of use,the CuO coating was protected by TiO2.The experiment shows that the TiO2/CuO coating is more heat-resistant,acid-resistant,and wear resistant than CuO coating,without Iosing absorptivity markedly.The TiO2 coating can reduce emissivity and protect the CuO coating.

  4. A new approach for crystallization of copper(ii) oxide hollow nanostructures with superior catalytic and magnetic response

    Science.gov (United States)

    Singh, Inderjeet; Landfester, Katharina; Chandra, Amreesh; Muñoz-Espí, Rafael

    2015-11-01

    We report the synthesis of copper(ii) oxide hollow nanostructures at ambient pressure and close to room temperature by applying the soft templating effect provided by the confinement of droplets in miniemulsion systems. Particle growth can be explained by considering a mechanism that involves both diffusion and reaction control. The catalytic reduction of p-nitrophenol in aqueous media is used as a model reaction to prove the catalytic activity of the materials: the synthesized hollow structures show nearly 100 times higher rate constants than solid CuO microspheres. The kinetic behavior and the order of the reduction reaction change due to the increase of the surface area of the hollow structures. The synthesis also leads to modification of physical properties such as magnetism.We report the synthesis of copper(ii) oxide hollow nanostructures at ambient pressure and close to room temperature by applying the soft templating effect provided by the confinement of droplets in miniemulsion systems. Particle growth can be explained by considering a mechanism that involves both diffusion and reaction control. The catalytic reduction of p-nitrophenol in aqueous media is used as a model reaction to prove the catalytic activity of the materials: the synthesized hollow structures show nearly 100 times higher rate constants than solid CuO microspheres. The kinetic behavior and the order of the reduction reaction change due to the increase of the surface area of the hollow structures. The synthesis also leads to modification of physical properties such as magnetism. Electronic supplementary information (ESI) available: Associated structural and morphological analysis, XPS characterization, BET surface area, catalytic measurements, recycle tests of the catalyst, and magnetic characterizations. See DOI: 10.1039/c5nr05579b

  5. have a hollow leg

    Institute of Scientific and Technical Information of China (English)

    周立

    2003-01-01

    英语对话 A:We must prevent our family members from getting involved with drugs, really. B:That’s a sure thing.We must make sure that they never involve them- selves with that. A:By the way,does your husband drink a lot? B:Yeah.That’s the only thing that keeps worrying me.And he often boasts that he has a hollow leg and nobody can drink him under the ta- ble.

  6. Tailored 3D CuO Nanogrid Formation

    Directory of Open Access Journals (Sweden)

    Jusang Lee

    2011-01-01

    Full Text Available This paper reports on the controlled synthesis of 3D CuO nanogrids by the combined use of electrospinning and thermal oxidation of a composite metal mesh/polymer mat architecture. The obtained nanogrids result from three steps encompassing: (i Cu atom clusters diffusing into the nanofibers producing polymer-metal “core-shell”-type fibers (ii decomposition of the polymeric shell; (iii oxidation of the metallic core of the nanofibers to form self-supported, open nanogrids consisting of continuous nanofibers of CuO nanoparticles with an average diameter of 20 nm. The calculated band gap energy of the cupric oxide nanogrids was determined from the UV-Vis spectrum to be 1.32 eV. The unique 3D CuO nanogrids may be used as key components of 3D nanobatteries, photocatalysts, and p-type chemosensors.

  7. Correlated barrier hopping of CuO nanoparticles

    Science.gov (United States)

    Koshy, Jiji; Soosen, Samuel. M.; Chandran, Anoop; George, K. C.

    2015-12-01

    The ac conduction mechanism in copper oxide nanoparticles with 8 nm size, synthesized by a precipitation method was studied by analyzing ac conductivity in the frequency range of 50 Hz-1 MHz and in the temperature range of 373-573 K. X-ray diffraction and transmission electron microscopy (TEM) were employed for the structural and morphological characterization of CuO nanoparticles. The experimental and theoretical investigations suggested that the ac conduction mechanism in CuO nanoparticles can be successfully explained by a correlated barrier hopping model, which provided reasonable values for the maximum barrier height and characteristic relaxation time. It was also found that bipolaron hopping become prominent up to a particular temperature and beyond that single polaron hopping predominates. Physical parameters such as hopping distance and density of defect states were also calculated. Photoluminescence studies confirm the presence of a surface defect in CuO nanoparticles.

  8. Mercury - the hollow planet

    Science.gov (United States)

    Rothery, D. A.

    2012-04-01

    Mercury is turning out to be a planet characterized by various kinds of endogenous hole (discounting impact craters), which are compared here. These include volcanic vents and collapse features on horizontal scales of tens of km, and smaller scale depressions ('hollows') associated with bright crater-floor deposits (BCFD). The BCFD hollows are tens of metres deep and kilometres or less across and are characteristically flat-floored, with steep, scalloped walls. Their form suggests that they most likely result from removal of surface material by some kind of mass-wasting process, probably associated with volume-loss caused by removal (via sublimation?) of a volatile component. These do not appear to be primarily a result of undermining. Determining the composition of the high-albedo bluish surface coating in BCFDs will be a key goal for BepiColombo instruments such as MIXS (Mercury Imaging Xray Spectrometer). In contrast, collapse features are non-circular rimless pits, typically on crater floors (pit-floor craters), whose morphology suggests collapse into void spaces left by magma withdrawal. This could be by drainage of either erupted lava (or impact melt) or of shallowly-intruded magma. Unlike the much smaller-scale BCFD hollows, these 'collapse pit' features tend to lack extensive flat floors and instead tend to be close to triangular in cross-section with inward slopes near to the critical angle of repose. The different scale and morphology of BCFD hollows and collapse pits argues for quite different modes of origin. However, BCFD hollows adjacent to and within the collapse pit inside Scarlatti crater suggest that the volatile material whose loss was responsible for the growth of the hollows may have been emplaced in association with the magma whose drainage caused the main collapse. Another kind of volcanic collapse can be seen within a 25 km-wide volcanic vent outside the southern rim of the Caloris basin (22.5° N, 146.1° E), on a 28 m/pixel MDIS NAC image

  9. Hollow Polyimide Microspheres

    Science.gov (United States)

    Weiser, Erik S. (Inventor); St.Clair, Terry L. (Inventor); Echigo, Yoshiaki (Inventor); Kaneshiro, Hisayasu (Inventor)

    2001-01-01

    A shaped article composed of an aromatic polyimide has a hollow, essentially spherical structure and a particle size of about 100 to about 1500 micrometers, a density of about 1 to about 6 pounds/cubic foot and a volume change of 1 to about 20% by a pressure treatment of 30 psi for 10 minutes at room temperature. A syntactic foam, made of a multiplicity of the shaped articles which are bonded together by a matrix resin to form an integral composite structure, has a density of about 3 to about 30 pounds/cubic feet and a compression strength of about 100 to about 1400 pounds/sq inch.

  10. Birefringent hollow core fibers

    DEFF Research Database (Denmark)

    Roberts, John

    2007-01-01

    Hollow core photonic crystal fiber (HC-PCF), fabricated according to a nominally non-birefringent design, shows a degree of un-controlled birefringence or polarization mode dispersion far in excess of conventional non polarization maintaining fibers. This can degrade the output pulse in many...... and an increased overlap between the polarization modes at the glass interfaces. The interplay between these effects leads to a wavelength for optimum polarization maintenance, lambda(PM), which is detuned from the wavelength of highest birefringence. By a suitable fiber design involving antiresonance of the core...

  11. Birefringent hollow core fibers

    DEFF Research Database (Denmark)

    Roberts, John

    2007-01-01

    Hollow core photonic crystal fiber (HC-PCF), fabricated according to a nominally non-birefringent design, shows a degree of un-controlled birefringence or polarization mode dispersion far in excess of conventional non polarization maintaining fibers. This can degrade the output pulse in many...... and an increased overlap between the polarization modes at the glass interfaces. The interplay between these effects leads to a wavelength for optimum polarization maintenance, lambda(PM), which is detuned from the wavelength of highest birefringence. By a suitable fiber design involving antiresonance of the core...

  12. Synthesis and Optical Properties of CuO Nanocrystals with Controllable Shapes and Size

    Directory of Open Access Journals (Sweden)

    Goraya Neelinder

    2016-01-01

    Full Text Available Highly dispersed copper oxide (CuO nanoparticles had been successfully prepared by a hydrothermal technique where different adding temperatures of NaOH were taken. The as-prepared CuO nanoparticles were characterized by X-ray diffraction (XRD, transmission electron microscopy (TEM and Raman spectroscopy. The results showed that the adding temperature of NaOH has an important influence on the shape and size of CuO nanocrystals The influence of reaction conditions on morphology of CuO nanocrystals was discussed. Furthermore, different shapes of obtained CuO nanocrystals exhibit different Raman properties.

  13. Thermal conductivity enhancement in thermal grease containing different CuO structures.

    Science.gov (United States)

    Yu, Wei; Zhao, Junchang; Wang, Mingzhu; Hu, Yiheng; Chen, Lifei; Xie, Huaqing

    2015-01-01

    Different cupric oxide (CuO) structures have attracted intensive interest because of their promising applications in various fields. In this study, three kinds of CuO structures, namely, CuO microdisks, CuO nanoblocks, and CuO microspheres, are synthesized by solution-based synthetic methods. The morphologies and crystal structures of these CuO structures are characterized by field-emission scanning electron microscope and X-ray diffractometer, respectively. They are used as thermal conductive fillers to prepare silicone-based thermal greases, giving rise to great enhancement in thermal conductivity. Compared with pure silicone base, the thermal conductivities of thermal greases with CuO microdisks, CuO nanoblocks, and CuO microspheres are 0.283, 0256, and 0.239 W/mK, respectively, at filler loading of 9 vol.%, which increases 139%, 116%, and 99%, respectively. These thermal greases present a slight descendent tendency in thermal conductivity at elevated temperatures. These experimental data are compared with Nan's model prediction, indicating that the shape factor has a great influence on thermal conductivity improvement of thermal greases with different CuO structures. Meanwhile, due to large aspect ratio of CuO microdisks, they can form thermal networks more effectively than the other two structures, resulting in higher thermal conductivity enhancement.

  14. Plant Mediated Green Synthesis of CuO Nanoparticles: Comparison of Toxicity of Engineered and Plant Mediated CuO Nanoparticles towards Daphnia magna

    Directory of Open Access Journals (Sweden)

    Sadia Saif

    2016-11-01

    Full Text Available Research on green production methods for metal oxide nanoparticles (NPs is growing, with the objective to overcome the potential hazards of these chemicals for a safer environment. In this study, facile, ecofriendly synthesis of copper oxide (CuO nanoparticles was successfully achieved using aqueous extract of Pterospermum acerifolium leaves. P. acerifolium-fabricated CuO nanoparticles were further characterized by UV-Visible spectroscopy, field emission scanning electron microscopy (FE-SEM, energy dispersive X-ray (EDX, Fourier transform infrared spectroscopy (FTIR, X-ray photoelectron spectroscopy (XPS and dynamic light scattering (DLS. Plant-mediated CuO nanoparticles were found to be oval shaped and well dispersed in suspension. XPS confirmed the elemental composition of P. acerifolium-mediated copper nanoparticles as comprised purely of copper and oxygen. DLS measurements and ion release profile showed that P. acerifolium-mediated copper nanoparticles were more stable than the engineered CuO NPs. Copper oxide nanoparticles are used in many applications; therefore, their potential toxicity cannot be ignored. A comparative study was performed to investigate the bio-toxic impacts of plant-synthesized and engineered CuO nanoparticles on water flea Daphnia. Experiments were conducted to investigate the 48-h acute toxicity of engineered CuO NPs and plant-synthesized nanoparticles. Lower EC50 value 0.102 ± 0.019 mg/L was observed for engineered CuO NPs, while 0.69 ± 0.226 mg/L was observed for plant-synthesized CuO NPs. Additionally, ion release from CuO nanoparticles and 48-h accumulation of these nano CuOs in daphnids were also calculated. Our findings thus suggest that the contribution of released ions from nanoparticles and particles/ions accumulation in Daphnia needs to be interpreted with care.

  15. Plant Mediated Green Synthesis of CuO Nanoparticles: Comparison of Toxicity of Engineered and Plant Mediated CuO Nanoparticles towards Daphnia magna.

    Science.gov (United States)

    Saif, Sadia; Tahir, Arifa; Asim, Tayyaba; Chen, Yongsheng

    2016-11-09

    Research on green production methods for metal oxide nanoparticles (NPs) is growing, with the objective to overcome the potential hazards of these chemicals for a safer environment. In this study, facile, ecofriendly synthesis of copper oxide (CuO) nanoparticles was successfully achieved using aqueous extract of Pterospermum acerifolium leaves. P. acerifolium-fabricated CuO nanoparticles were further characterized by UV-Visible spectroscopy, field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and dynamic light scattering (DLS). Plant-mediated CuO nanoparticles were found to be oval shaped and well dispersed in suspension. XPS confirmed the elemental composition of P. acerifolium-mediated copper nanoparticles as comprised purely of copper and oxygen. DLS measurements and ion release profile showed that P. acerifolium-mediated copper nanoparticles were more stable than the engineered CuO NPs. Copper oxide nanoparticles are used in many applications; therefore, their potential toxicity cannot be ignored. A comparative study was performed to investigate the bio-toxic impacts of plant-synthesized and engineered CuO nanoparticles on water flea Daphnia. Experiments were conducted to investigate the 48-h acute toxicity of engineered CuO NPs and plant-synthesized nanoparticles. Lower EC50 value 0.102 ± 0.019 mg/L was observed for engineered CuO NPs, while 0.69 ± 0.226 mg/L was observed for plant-synthesized CuO NPs. Additionally, ion release from CuO nanoparticles and 48-h accumulation of these nano CuOs in daphnids were also calculated. Our findings thus suggest that the contribution of released ions from nanoparticles and particles/ions accumulation in Daphnia needs to be interpreted with care.

  16. Characterization of Doped and Undoped CuO Nanoparticles

    Science.gov (United States)

    Gazioǧlu, Dilek Taşkin; Dumludaǧ, Fatih; Altindal, Ahmet

    2010-01-01

    Undoped and doped with Ti, Cd and Zn CuO nanoparticles were obtained by precipitation method. The crystal structures of the CuO nanoparticles were characterized by X-ray diffraction. Impedance spectroscopy (IS) and d.c conductivity (σd.c) measurements were performed on samples as a function of temperature and frequency (40-105 Hz.) to determine the electrical behavior of the nano powder. It was found that the Arrhenius graph of the samples consist of two linear regions and corresponding activation energies. The dependency of frequency exponent s on temperature and frequency suggests a conduction mechanism which is indication of hopping. The measured impedance spectra showed a furher semicircle at low frequencies for all temperatures. The low frequency semicirles in impedance spectra are attributted to the garin boundry effects.

  17. Investigation on CuO Dispersed PVA Polymer Films

    Directory of Open Access Journals (Sweden)

    R. Divya

    2015-05-01

    Full Text Available Addition of inorganic nanoparticles to polymers allows the modification of physical properties of polymers as well as the implementation of new features in polymer matrix. In the present work, we have made an attempt to disperse CuO nanoparticles in the polyvinyl alcohol (PVA and to understand the change in structural, optical and electrical properties of the polymer film. CuO nanoparticles were added in four different concentrations, viz. 2.5, 5.0, 7.5 and 10 wt%. A total of 5 films were prepared (including the pure PVA film, for comparison.The prepared films were subjected to XRD, FESEM, UV-Vis spectral, PL spectral and electrical analyses. The results obtained are reported.

  18. Exchange bias effect in composites of cuo nanoparticles and nanosilica glass

    Energy Technology Data Exchange (ETDEWEB)

    Ranjan Saha, Dhriti [MLS Professor' s Unit, Indian Association for the Cultivation of Science, 2A and 2B Raja S.C. Mullick Road, Jadavpur, Kolkata 700032 (India); Kumar Nandi, Arun [Polymer Science Unit, Indian Association for the Cultivation of Science, 2A and 2B Raja S.C. Mullick Road, Jadavpur, Kolkata 700032 (India); Chakravorty, Dipankar, E-mail: mlsdc@iacs.res.in [MLS Professor' s Unit, Indian Association for the Cultivation of Science, 2A and 2B Raja S.C. Mullick Road, Jadavpur, Kolkata 700032 (India)

    2014-04-15

    Nanodimensional silica based glass containing iron ions was prepared within the compressed pellet of CuO nanoparicles. The nanocomposite material showed exchange bias effect. This effect arose due to ferromagnetic iron doped CuO phase and antiferromagnetic CuO interface formation within the nanocomposite during the synthesis process. Coercive field as a function of temperature was fitted with Arhenius–Neel equation and extracted blocking temperature was 511 K. The value of effective anisotropy constant for the nanocomposite was found to be 3.64x10{sup 5} erg/cc. - Highlights: • Nanoglass comprising SiO{sub 2} and Fe{sub 2}O{sub 3} was grown with pores of CuO nanoparticle compacts. • CuO (AFM)-core and Fe doped CuO (FM) shell were formed during synthesis. • The nanocomposite material showed exchange bias effect.

  19. Dynamics of Quasiparticles in CuO2 Planes

    Science.gov (United States)

    Mattis, Daniel C.

    At 5 electrons per cell, planar CuO2 is an antiferromagnetic insulator rather than a Fermi liquid. We consider the effects of adding a few electrons or holes into such an insulator and derive a relation between the insulating energy gap and effective mass m* of the added carriers. We find m{el}{*} to differ from m{hol}{*} , with both being temperature dependent.

  20. Multiphonon hopping of carriers in CuO thin films

    Science.gov (United States)

    Serin, T.; Yildiz, A.; Şahin, Ş. H.; Serin, N.

    2011-10-01

    We have performed a detailed study of the electrical conduction process in CuO thin films deposited by the sol-gel dip coating technique in a temperature range 280-420 K. The electrical conduction is analyzed within the framework of various hopping conduction models. Multiphonon hopping conduction mechanism is found to dominate the electrical transport in the entire temperature region. Our results are consistent with this model of hopping conduction mechanisms with weak carrier-lattice coupling.

  1. Transport measurements on individual CuO 2 double layers

    Science.gov (United States)

    Mößle, M.; Kleiner, R.; Gatt, R.; Onellion, M.; Müller, P.

    2000-11-01

    Oxygen loss at the surface of Bi 2Sr 2CaCu 2O 8+ x single crystals provides CuO 2 layers with different critical temperatures. Particularly for overdoped crystals this allows to achieve a T c maximum near the surface. We performed transport measurements of this oxygen depleted layer. Samples were prepared by evaporating four Pb or Ag electrodes on top of freshly cleaved Bi 2Sr 2CaCu 2O 8+ x single crystals. Using overdoped crystals with a bulk T c of 55 to 60 K, the outermost layer was found to be underdoped with T c down to 30 K while the adjacent one was near optimal doping with T c between 80 and 90 K. The T c of the third layer was close to the bulk value. For temperatures above the bulk T c often only one CuO 2 double layer was found to be superconducting. We discuss current transport measurements with current flow along the CuO 2 layers.

  2. Substrate effects on SILAR route synthesized CuO thin films

    Science.gov (United States)

    Dhanasekaran, V.; Mahalingam, T.; Ravi, G.; Rhee, Jin-Koo

    2012-06-01

    Cupric oxide (CuO) thin films are deposited using SILAR method onto various substrates. The X-ray diffraction patterns revealed that the deposited films are polycrystalline in nature with monoclinic structure. The microstructural parameters of chemical bath deposited CuO thin films are calculated using the structural studies. The optical band gap value is determined using transmission spectrum of CuO thin films and the results are discussed.

  3. Effect of CuO Addition on the Sintering Behavior and Electrical Conductivity of 3Y-TZP

    Institute of Scientific and Technical Information of China (English)

    Ahmed A.Hassan; Omar Abdelal A.; S.M. EL-Hout

    2007-01-01

    Yttria stabilized tetragonal zirconia polycrystals (3Y-TZP) doped with CuO was prepared, to get two compositions, 0.3 and 1 mole fraction CuO, respectively. The dilatometric study of the samples showed sintering to be improved for the samples doped with 0.3 mole fraction CuO, and to be deteriorated for the samples doped with 1 mole fraction CuO. The 1 mole fraction CuO doped 3Y-TZP showed higher tetragonal/monoclinic phase transformation which was accompanied by grain growth. The electrical conductivity decreased with the addition of CuO.

  4. Facile Synthesis of Colloidal CuO Nanocrystals for Light-Harvesting Applications

    Directory of Open Access Journals (Sweden)

    Yee-Fun Lim

    2012-01-01

    Full Text Available CuO is an earth-abundant, nontoxic, and low band-gap material; hence it is an attractive candidate for application in solar cells. In this paper, a synthesis of CuO nanocrystals by a facile alcohothermal route is reported. The nanocrystals are dispersible in a solvent mixture of methanol and chloroform, thus enabling the processing of CuO by solution. A bilayer solar cell comprising of CuO nanocrystals and phenyl-C61-butyric acid methyl ester (PCBM achieved a power conversion efficiency of 0.04%, indicating the potential of this material for light-harvesting applications.

  5. Facile Synthesis of Colloidal CuO Nanocrystals for Light-Harvesting Applications

    KAUST Repository

    Lim, Yee-Fun

    2012-01-01

    CuO is an earth-abundant, nontoxic, and low band-gap material; hence it is an attractive candidate for application in solar cells. In this paper, a synthesis of CuO nanocrystals by a facile alcohothermal route is reported. The nanocrystals are dispersible in a solvent mixture of methanol and chloroform, thus enabling the processing of CuO by solution. A bilayer solar cell comprising of CuO nanocrystals and phenyl-C61-butyric acid methyl ester (PCBM) achieved a power conversion efficiency of 0.04%, indicating the potential of this material for light-harvesting applications.

  6. CuO three-dimensional flowerlike nanostructures: Controlled synthesis and characterization

    Science.gov (United States)

    Zhang, Xia; Guo, Yong-Gang; Liu, Wei-Min; Hao, Jing-Cheng

    2008-06-01

    CuO three-dimensional (3D) flowerlike nanostructures were successfully synthesized on copper surface by a simple solution method. CuO nanostructure was systematically studied by scanning electron microscopy, transmission electron microscopy, x-ray powder diffraction, and x-ray photoelectron spectrum. The factors to control the morphology and size of the CuO nanostructures were explored, showing that the reaction time and the concentration of starting regents play important roles in the formation of the CuO 3D nanostructures.

  7. Switching a Nanocluster Core from Hollow to Non-hollow

    KAUST Repository

    Bootharaju, Megalamane Siddaramappa

    2016-03-24

    Modulating the structure-property relationship in atomically precise nanoclusters (NCs) is vital for developing novel NC materials and advancing their applications. While promising biphasic ligand-exchange (LE) strategies have been developed primarily to attain novel NCs, understanding the mechanistic aspects involved in tuning the core and the ligand-shell of NCs in such biphasic processes is challenging. Here, we design a single phase LE process that enabled us to elucidate the mechanism of how a hollow NC (e.g., [Ag44(SR)30]4-, -SR: thiolate) converts into a non-hollow NC (e.g., [Ag25(SR)18]-), and vice versa. Our study reveals that the complete LE of the hollow [Ag44(SPhF)30]4- NCs (–SPhF: 4-fluorobenzenethiolate) with incoming 2,4-dimethylbenzenethiol (HSPhMe2) induced distortions in the Ag44 structure forming the non-hollow [Ag25(SPhMe2)18]- by a disproportionation mechanism. While the reverse reaction of [Ag25(SPhMe2)18]- with HSPhF prompted an unusual dimerization of Ag25, followed by a rearrangement step that reproduces the original [Ag44(SPhF)30]4-. Remarkably, both the forward and the backward reactions proceed through similar size intermediates that seem to be governed by the boundary conditions set by the thermodynamic and electronic stability of the hollow and non-hollow metal cores. Furthermore, the resizing of NCs highlights the surprisingly long-range effect of the ligands which are felt by atoms far deep in the metal core, thus opening a new path for controlling the structural evolution of nanoparticles.

  8. Isolation of copper oxide (CuO) nanoparticles resistant Pseudomonas strains from soil and investigation on possible mechanism for resistance.

    Science.gov (United States)

    Soltani Nezhad, Shahla; Rabbani Khorasgani, Mohammad; Emtiazi, Giti; Yaghoobi, Mohammad Mehdi; Shakeri, Shahryar

    2014-03-01

    The present study deals with isolation and characterization of copper oxide nanoparticles resistant Pseudomonas strains that were isolated from the soil collected from mining and refining sites of Sarcheshmeh copper mine in the Kerman Province of Iran. The three isolates were selected based on high level of copper oxide nanoparticles (CuO NPs) resistance. The isolates were authentically identified as Pseudomonas fluorescens CuO-1, Pseudomonas fluorescens CuO-2 and Pseudomonas sp. CuO-3 by morphological, biochemical and 16S rDNA gene sequencing analysis. The growth pattern of these isolates with all the studied CuO NPs concentrations was similar to that of control (without CuO NPs) indicating that CuO NPs would not affect the growth of isolated strains. A reduction in the amount of exopolysaccharides was observed after CuO NPs-P. fluorescens CuO-1 culture supernatant interaction. The Fourier transform infrared spectroscopy (FT-IR) peaks for the exopolysaccharides extracted from the bacterial culture supernatant and the interacted CuO NPs were almost similar. The exopolysaccharide capping of the CuO NPs was confirmed by FT-IR and X-ray diffraction analysis. The study of bacterial exopolysaccharides capped CuO NPs with E. coli PTCC 1338 and S. aureus PTCC 1113 showed less toxicity compared to uncoated CuO NPs. Our study suggests that the capping of nanoparticles by bacterially produced exopolysaccharides serve as the probable mechanism of tolerance.

  9. Quartz antenna with hollow conductor

    Science.gov (United States)

    Leung, Ka-Ngo; Benabou, Elie

    2002-01-01

    A radio frequency (RF) antenna for plasma ion sources is formed of a hollow metal conductor tube disposed within a glass tube. The hollow metal tubular conductor has an internal flow channel so that there will be no coolant leakage if the outer glass tube of the antenna breaks. A portion of the RF antenna is formed into a coil; the antenna is used for inductively coupling RF power to a plasma in an ion source chamber. The antenna is made by first inserting the metal tube inside the glass tube, and then forming the glass/metal composite tube into the desired coil shape.

  10. Hollow waveguide for urology treatment

    Science.gov (United States)

    Jelínková, H.; Němec, M.; Koranda, P.; Pokorný, J.; Kőhler, O.; Drlík, P.; Miyagi, M.; Iwai, K.; Matsuura, Y.

    2010-02-01

    The aim of our work was the application of the special sealed hollow waveguide system for the urology treatment - In our experimental study we have compared the effects of Ho:YAG (wavelength 2100 nm) and Er:YAG (wavelength 2940 nm) laser radiation both on human urinary stones (or compressed plaster samples which serve as a model) fragmentation and soft ureter tissue incision in vitro. Cyclic Olefin Polymer - coated silver (COP/Ag) hollow glass waveguides with inner and outer diameters 700 and 850 μm, respectively, were used for the experiment. To prevent any liquid to diminish and stop the transmission, the waveguide termination was utilized.

  11. STRUCTURAL AND ELECTRONIC PROPERTIES OF CuO, CuO2 AND Cu2O NANOCLUSTERS – A DFT APPROACH

    Directory of Open Access Journals (Sweden)

    Chandiramouli RAMANATHAN

    2015-06-01

    Full Text Available The realistic structures of CuO, CuO2 and Cu2O were completely optimized using density functional theory approach. The different structures were optimized to study the structural stability, dipole moment, point symmetry, HOMO-LUMO gap, ionization potential, electron affinity and binding energy of CuO, CuO2 and Cu2O. The electronic properties of clusters were discussed in terms of HOMO-LUMO gap, density of states, ionization potential and electron affinity. This information will provide an insight for the synthesis of nanomaterials with proper geometry which finds its potential importance in engineering applications.DOI: http://dx.doi.org/10.5755/j01.ms.21.2.6459

  12. Study of the C-14-contamination potential of C-impurities in CuO and Fe

    NARCIS (Netherlands)

    Vandeputte, K; Moens, L; Dams, R; van der Plicht, Johannes

    1998-01-01

    The carbon concentration in CuO and iron was determined by isolating C. The values were in agreement with results reported in other studies. Contaminating carbon from CuO and Fe was transformed to AMS targets and measured for C-14. C-traces in CuO were shown to be the major contribution to the C-14

  13. Anomalous Raman spectra from La2CuO4

    Science.gov (United States)

    Burns, Gerald; Dacol, F. H.

    1990-03-01

    We show that some published Raman spectra from the superconductors (La2-xSrx)CuO4 and La2NiO4 are incorrect. We believe that these spectra were obtained when the samples were ``burnt'' by the focused laser beam and were actually due to La2O3. Similar anomalous results can be obtained when starting with Nd2CuO4 where the spectra come from Nd2O3. A spectrum distinctly different from those of La2O3 or Nd2O3 is obtained from Y2O3.

  14. Chronic effects of CuO Nanoparticles on Lymnaea stagnalis

    DEFF Research Database (Denmark)

    Falk, Nina; Zwicky, Julie; Rewentlow, Julie

    Due to their small size and high surface-to-volume ratio, the properties and reactivity of NPs are different from those of their bulk forms. However, these properties might cause different behaviour and effects in the environment and investigations of possible nano specific effects are thus highl...... relevant. Investigation of the long-term effects of CuO NPs on growth, mortality and precopulation of Hyalella azteca compared to CuCl2 and to further examine possible delayed effects and ability to recover from Cu exposure....

  15. Hollow waveguide cavity ringdown spectroscopy

    Science.gov (United States)

    Dreyer, Chris (Inventor); Mungas, Greg S. (Inventor)

    2012-01-01

    Laser light is confined in a hollow waveguide between two highly reflective mirrors. This waveguide cavity is used to conduct Cavity Ringdown Absorption Spectroscopy of loss mechanisms in the cavity including absorption or scattering by gases, liquid, solids, and/or optical elements.

  16. Preparation of CuO Quantum Dots by Cost-Effective Ultrasonication Technique

    Science.gov (United States)

    Rathod, K. N.; Savaliya, Chirag; Babiya, K. R.; Vasvani, S. H.; Ramani, Rupeshkumar V.; Ramani, Bharat M.; Joshi, Ashvini D.; Pandya, Dhiren; Shah, N. A.; Markna, J. H.

    Due to exciting size-dependent chemical and physical properties, nanoscale materials have extensive range of applications compared with microstructural particles. CuO nanoparticles are very important among transition metal oxides because of their large number of applications. Quantum dots (QDs) of CuO (copper oxide) were prepared by the innovative ultrasonication method. Ultrasonic sound is used in this synthesis method to synthesize QDs of copper oxide. Structural and optical properties were studied in this research work. X-ray diffraction was used to study the formation of structural phase CuO QDs and found to be single phasic without any impurity. Transmission electron microscopic measurements were performed to study the morphology of QDs of CuO, which confirms spherical QDs with an average diameter of ˜4nm. In optical studies, absorption spectra of the CuO were analyzed by using UV-visible spectroscopy.

  17. The behavior and effect of CuO in Ag/SnO{sub 2} materials

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jun, E-mail: Wangjun1983@stu.xjtu.edu.cn [MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, School of Science, Xi’an Jiaotong University, Xi’an 710049 (China); Liu, Wei, E-mail: 810779396@qq.com [MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, School of Science, Xi’an Jiaotong University, Xi’an 710049 (China); Li, Dongmei, E-mail: 946346365@qq.con [MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, School of Science, Xi’an Jiaotong University, Xi’an 710049 (China); Wang, Yaping, E-mail: ypwang@mail.xjtu.edu.cn [MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, School of Science, Xi’an Jiaotong University, Xi’an 710049 (China); State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049 (China)

    2014-03-05

    Highlights: • The crystallized monoclinic CuO in CuO-doped SnO{sub 2} nanoparticles had formed. • The crystallized monoclinic CuO distributed on the surface of SnO{sub 2} nanoparticles. • Ag/SnO{sub 2} materials adding CuO exhibited denser microstructure and better hardness. • Ag/SnO{sub 2} materials adding CuO exhibited better arc erosion resistance. • The addition of CuO can obviously inhibited the spattering loss of molten droplet. -- Abstract: In this paper, the behavior of CuO in CuO-doped SnO{sub 2} nanoparticles was investigated; the effect of the addition of CuO on physical properties and arc erosion behavior of Ag/SnO{sub 2} materials were examined. The CuO-doped SnO{sub 2} nanoparticles were structurally characterized by X-ray diffraction (XRD) and High-resolution Transmission Electron Microscope (HR-TEM). The surface morphology of arc eroded Ag/SnO{sub 2} materials was characterized by Scanning Electron Microscope (SEM). The results indicated that the crystallized monoclinic CuO in CuO-doped SnO{sub 2} nanoparticles has formed and distributed on the surface of SnO{sub 2} nanoparticles. It was found that Ag/SnO{sub 2} materials adding CuO exhibited denser microstructure and better hardness as well as better arc erosion resistance compared with Ag/SnO{sub 2} materials. The arc erosion results and theoretical analysis indicated that the addition of CuO in Ag/SnO{sub 2} materials can obviously inhibited the spattering loss of molten droplets.

  18. Charge transport in single CuO nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Junnan; Yin, Bo; Wu, Fei; Myung, Yoon; Banerjee, Parag, E-mail: parag.banerjee@wustl.edu [Department of Mechanical Engineering and Materials Science, One Brookings Drive, Washington University, St. Louis, Missouri 63130 (United States)

    2014-11-03

    Charge transport in single crystal, p-type cupric oxide (CuO) nanowire (NW) was studied through temperature based (120 K–400 K) current-voltage measurements. CuO NW with a diameter of 85 nm was attached to Au electrodes 2.25 μm apart, using dielectrophoresis. At low electrical field (<0.89 × 10{sup 3 }V/cm), an ohmic conduction is observed with an activation energy of 272 meV. The injected electrons fill traps with an average energy, E{sub T} = 26.6 meV and trap density, N{sub T} = 3.4 × 10{sup 15 }cm{sup −3}. After the traps are saturated, space charge limited current mechanism becomes dominant. For 120 K ≤ T ≤ 210 K phonon scattering limits mobility. For T ≥ 220 K, a thermally activated mobility is observed and is attributed to small polaron hopping with an activation energy of 44 meV. This mechanism yields a hole mobility of 0.0015 cm{sup 2}/V s and an effective hole concentration of 4 × 10{sup 18 }cm{sup −3} at 250 K.

  19. Charge transport in single CuO nanowires

    Science.gov (United States)

    Wu, Junnan; Yin, Bo; Wu, Fei; Myung, Yoon; Banerjee, Parag

    2014-11-01

    Charge transport in single crystal, p-type cupric oxide (CuO) nanowire (NW) was studied through temperature based (120 K-400 K) current-voltage measurements. CuO NW with a diameter of 85 nm was attached to Au electrodes 2.25 μm apart, using dielectrophoresis. At low electrical field (conduction is observed with an activation energy of 272 meV. The injected electrons fill traps with an average energy, ET = 26.6 meV and trap density, NT = 3.4 × 1015 cm-3. After the traps are saturated, space charge limited current mechanism becomes dominant. For 120 K ≤ T ≤ 210 K phonon scattering limits mobility. For T ≥ 220 K, a thermally activated mobility is observed and is attributed to small polaron hopping with an activation energy of 44 meV. This mechanism yields a hole mobility of 0.0015 cm2/V s and an effective hole concentration of 4 × 1018 cm-3 at 250 K.

  20. Ultrathin willow-like CuO nanoflakes as an efficient catalyst for electro-oxidation of hydrazine

    Science.gov (United States)

    Ma, Yuanyuan; Li, Hao; Wang, Rongfang; Wang, Hui; Lv, Weizhong; Ji, Shan

    2015-09-01

    In this paper, preparation of ultrathin willow-like CuO nanoflakes via a one-step process was reported. X-ray diffraction pattern showed the formation of monoclinic CuO crystal, which was also confirmed by result of high resolution transmission electron microscopy. Scanning electron microscopy showed that ultrathin willow-like CuO nanoflakes were formed. Catalytic testing indicated that the ultrathin willow-like CuO nanoflakes exhibited high electrocatalytic activity and durability toward the electro-oxidation of hydrazine in alkaline medium. The results suggested that the as-prepared CuO nanoflakes were potential electrode materials for hydrazine fuel cell.

  1. 78 FR 60271 - Hollow Dam Power Company; Ampersand Hollow Dam Hydro, LLC; Notice of Application for Transfer of...

    Science.gov (United States)

    2013-10-01

    ... Federal Energy Regulatory Commission Hollow Dam Power Company; Ampersand Hollow Dam Hydro, LLC; Notice of..., Hollow Dam Power Company (transferor) and Ampersand Hollow Dam Hydro, LLC (transferee) filed an application for transfer of license for the Hollow Dam Project, FERC No. 6972, located on the West Branch...

  2. Synthesis and concentration dependent antibacterial activities of CuO nanoflakes

    Energy Technology Data Exchange (ETDEWEB)

    Pandiyarajan, T.; Udayabhaskar, R. [Department of Physics, National Institute of Technology, Tiruchirappalli 620 015 (India); Vignesh, S.; James, R. Arthur [Department of Marine Science, Bharathidasan University, Tiruchirappalli 620 024 (India); Karthikeyan, B., E-mail: balkarin@yahoo.com [Department of Physics, National Institute of Technology, Tiruchirappalli 620 015 (India)

    2013-05-01

    We report, synthesis and antibacterial activities of CuO nanoflakes. CuO nanoparticles are prepared at room temperature through sol–gel method. X-ray diffraction studies show the particles are monoclinic (crystalline) in nature. Scanning electron microscopy (SEM) images clearly show that the prepared particles are flake like in structure. Fourier transform infrared (FTIR) spectra exhibits three different bands that correspond to the A{sub u} and B{sub u} modes. Antibacterial studies were performed on Shigella flexneri, Staphylococcus aureus, Staphylococcus epidermidis, Salmonella typhimurium, Bacillus subtilis, Escherichia coli, Vibrio cholera, Pseudomonas aeruginosa and Aeromonas liquefaciens bacterial strains. Among these bacterial strains, S. flexneri and B. subtilis are most sensitive to copper oxide nanoparticles than the positive control (Penicillin G) and S. typhimurium strain shows the less sensitive. Results show that sensitivity is highly dependent on the concentrations of CuO nanoflakes. - Highlights: ► CuO nanoflakes are prepared through simple sol–gel method at room temperature. ► Bacterial strains are highly affected by CuO nanoflakes than the positive control. ► Zone of inhibition increases with an increase of CuO concentrations. ► Sensitivity is highly dependent on the concentrations of CuO nanoflakes.

  3. Effects of CuO nanoparticles on compressive strength of self-compacting concrete

    Indian Academy of Sciences (India)

    Ali Nazari; Shadi Riahi

    2011-06-01

    In the present study, the compressive strength, thermal properties and microstructure of self-compacting concrete with different amounts of CuO nanoparticles have been investigated. CuO nanoparticles with an average particle size of 15 nm were added to self-compacting concrete and various properties of the specimens were measured. The results indicate that CuO nanoparticles are able to improve the compressive strength of self-compacting concrete and reverse the negative effects of superplasticizer on compressive strength of the specimens. CuO nanoparticles as a partial replacement of cement up to 4 wt.% could accelerate C–S–H gel formation as a result of the increased crystalline Ca(OH)2 amount at the early ages of hydration. Increasing CuO nanoparticle content to more than 4 wt.%, causes reduced compressive strength because of unsuitable dispersion of nanoparticles in the concrete matrix. Accelerated peak appearance in conduction calorimetry tests, more weight loss in thermogravimetric analysis and more rapid appearance of peaks related to hydrated products in X-ray diffraction results, all indicate that CuO nanoparticles up to 4 wt.% could improve the mechanical and physical properties of the specimens. Finally, CuO nanoparticles improved the pore structure of concrete and caused shifting of the distributed pores from harmless to low harm.

  4. Preparation and photocatalytic activities of 3D flower-like CuO nanostructures

    Science.gov (United States)

    Qingfei, Fan; Qi, Lan; Meili, Zhang; Ximei, Fan; Zuowan, Zhou; Chaoliang, Zhang

    2016-08-01

    Hierarchical 3D flower-like CuO nanostructures on the Cu substrates were synthesized by a wet chemical method and subsequent heat treatment. The synthesis, structure and morphologies of obtained samples under different concentrations of Na2S2O3 were investigated in detail and the possible growth mechanisms of the 3D flower-like CuO nanostructures were discussed. Na2S2O3 plays a key role in the generation of the 3D flower-like CuO nanostructures. When the concentration of Na2S2O3 is more than 0.4 mol/L, the 3D flower-like CuO nanostructures can be prepared on the Cu foils. The photocatalytic performances were studied by analyzing the degradation of methyl orange (MO) in aqueous solution in the presence of hydroxide water (H2O2). The 3D flower-like CuO nanostructures exhibit higher photocatalytic activity (96.2% degradation rate) than commercial CuO particles (36.3% degradation rate). The origin of the higher photocatalytic activity of the 3D flower-like CuO nanostructures was also discussed. Project supported by the High-Tech Research and Development Program of China (No. 2009AA03Z427).

  5. Hollow chain-like beams

    CERN Document Server

    Cherepko, Dmitriy; Popkov, Ivan

    2012-01-01

    To generate hollow chain-like beams the diffraction of the first order Bessel beam by zone plate with two odd open Fresnel zone has been investigated. It has been shown that the capsules size is influenced by the number of the second odd open Fresnel zone and by the zone plate focal length. A hollow chain-like beam has been experimentally generated as a result of the first order Bessel beam diffraction by zone plate with the first and the ninth open Fresnel zones. The orbital angular momentum presence has been proved experimentally. The main features of the beam have been investigated. Sufficiently good agreement between experimental and numerically calculated results has been demonstrated.

  6. Compact lanthanum hexaboride hollow cathode.

    Science.gov (United States)

    Goebel, Dan M; Watkins, Ronald M

    2010-08-01

    A compact lanthanum hexaboride hollow cathode has been developed for space applications where size and mass are important and research and industrial applications where access for implementation might be limited. The cathode design features a refractory metal cathode tube that is easily manufactured, mechanically captured orifice and end plates to eliminate expensive e-beam welding, graphite sleeves to provide a diffusion boundary to protect the LaB6 insert from chemical reactions with the refractory metal tube, and several heater designs to provide long life. The compact LaB(6) hollow cathode assembly including emitter, support tube, heater, and keeper electrode is less than 2 cm in diameter and has been fabricated in lengths of 6-15 cm for different applications. The cathode has been operated continuously at discharge currents of 5-60 A in xenon. Slightly larger diameter versions of this design have operated at up to 100 A of discharge current.

  7. Fabrication of Metallic Hollow Nanoparticles

    Science.gov (United States)

    Kim, Jae-Woo (Inventor); Choi, Sr., Sang H. (Inventor); Lillehei, Peter T. (Inventor); Chu, Sang-Hyon (Inventor); Park, Yeonjoon (Inventor); King, Glen C. (Inventor); Elliott, James R. (Inventor)

    2016-01-01

    Metal and semiconductor nanoshells, particularly transition metal nanoshells, are fabricated using dendrimer molecules. Metallic colloids, metallic ions or semiconductors are attached to amine groups on the dendrimer surface in stabilized solution for the surface seeding method and the surface seedless method, respectively. Subsequently, the process is repeated with additional metallic ions or semiconductor, a stabilizer, and NaBH.sub.4 to increase the wall thickness of the metallic or semiconductor lining on the dendrimer surface. Metallic or semiconductor ions are automatically reduced on the metallic or semiconductor nanoparticles causing the formation of hollow metallic or semiconductor nanoparticles. The void size of the formed hollow nanoparticles depends on the dendrimer generation. The thickness of the metallic or semiconductor thin film around the dendrimer depends on the repetition times and the size of initial metallic or semiconductor seeds.

  8. Purification of nanoparticles by hollow fiber diafiltration

    Science.gov (United States)

    Veeken, J.

    2012-09-01

    Hollow Fiber Diafiltration (Hollow Fiber Tangential Flow Filtration) is an efficient and rapid alternative to traditional methods of nanoparticle purification such as ultracentrifugation, stirred cell filtration, dialysis or chromatography. Hollow Fiber Diafiltration can be used to purify a wide range of nanoparticles including liposomes, colloids, magnetic particles and nanotubes. Hollow Fiber Diafiltration is a membrane based method where pore size determines the retention or transmission of solution components. It is a flow process where the sample is gently circulated through a tubular membrane. With controlled replacement of the permeate or (dialysate), pure nanoparticles can be attained. Hollow Fiber Diafiltration can be directly scaled up from R&D volumes to production. By adding more membrane fibers and maintaining the operating parameters, large volumes can be processed in the same time with the same pressure, and flow dynamics as bench-scale volumes. Keywords: hollow fiber, Diafiltration, filtration, purification, tangential flow filtration.

  9. Hollow-core grating fiber

    Science.gov (United States)

    Barillé, R.; Tajalli, P.; Roy, P.; Ahmadi-kandjani, S.; Kucharski, S.; Ortyl, E.

    2012-02-01

    We propose a new type of hollow-core fiber where the propagation is ensured by a photoinduced self-pattern acting as a surface relief grating (SRG). The SRG is written by launching a suitable laser beam with proper polarization in a capillary glass fiber with the inner surface previously coated with an azopolymer thin film. Such a grating acts as a wavelength/angle dependant reflective mirror and enhances the confinement and the propagation of the light.

  10. Cyclodextrin purification with hollow fibers

    Energy Technology Data Exchange (ETDEWEB)

    Berthod, A. (Univ. de Lyon 1, Villeubranne Cedex (France)); Jin, Heng Liang,; Armstrong, D.W. (Univ. of Missouri, Rolla (USA))

    1991-01-01

    Cyclodextrins are cyclic 1-4 linked oligomers of {alpha}-D-glucopyranose prepared from starch hydrolysis through enzymatic reactions. Mixtures of the three main cyclodextrins (CD), {alpha}-, {beta}-, and {gamma}-CDs, are always produced. A possible facile purification process is proposed. Permeation through hollow fibers made of a perfluorinated ionomer membrane. Nafion type, is shown to be an effective way to separate {alpha}-CD from {beta}- and {gamma}-CD. {Alpha}-CD with 95% purity was obtained after permeation through a Nafion hollow fiber of an equimolar 0.02 M solution of the three CDs. The fiber had a 56 cm{sup 2}/cm{sup 3} surface area per volume ratio. Kinetic studies and continuous extraction experiments with a 2-m coiled fiber showed that it is possible to obtain a 11.5 g {alpha}-CD solution with 92.4% purity or a 0.6 g {alpha}-CD solution with 97.2% purity, depending on the flow rate. The transport of CDs through the membrane could be due to moving water pools inside the ionomer. The small {alpha}-CD fits easily in such pools when the large {beta}- and {gamma}-CDs are excluded by steric hindrance. Temperature raises increased the permeation rates while decreasing the selectivity. The process could be scaled-up associating hollow fibers in bundle.

  11. Space Charge Mitigation With Longitudinally Hollow Bunches

    CERN Multimedia

    Oeftiger, Adrian; Rumolo, Giovanni

    2016-01-01

    Hollow longitudinal phase space distributions have a flat profile and hence reduce the impact of transverse space charge. Dipolar parametric excitation with the phase loop feedback systems provides such hollow distributions under reproducible conditions. We present a procedure to create hollow bunches during the acceleration ramp of CERN’s PS Booster machine with minimal changes to the operational cycle. The improvements during the injection plateau of the downstream Proton Synchrotron are assessed in comparison to standard parabolic bunches.

  12. Space Charge Mitigation With Longitudinally Hollow Bunches

    CERN Document Server

    Oeftiger, Adrian; Rumolo, Giovanni; CERN. Geneva. ATS Department

    2016-01-01

    Suitably, hollow longitudinal phase space distributions have a flat profile and hence reduce the impact of transverse space charge. Dipolar parametric excitation with the phase loop feedback systems provides such hollow distributions under reproducible conditions. We present a procedure to create hollow bunches during the acceleration ramp of CERN’s PS Booster machine with minimal changes to the operational cycle. The improvements during the injection plateau of the downstream Proton Synchrotron are assessed in comparison to standard parabolic bunches.

  13. Surfactant-free Synthesis of CuO with Controllable Morphologies and Enhanced Photocatalytic Property

    OpenAIRE

    Wang, Xing; Yang, Jiao; Shi, Liuxue; Gao, Meizhen

    2016-01-01

    A green synthesis for nanoleave, nanosheet, spindle-like, rugby-like, dandelion-like and flower-like CuO nanostructures (from 2D to 3D) is successfully achieved through simply hydrothermal synthetic method without the assistance of surfactant. The morphology of CuO nanostructures can be easily tailored by adjusting the amount of ammonia and the source of copper. By designing a time varying experiment, it is verified that the flower- and dandelion-like CuO structures are synthesized by the sel...

  14. The reactions of CuO at high pressure and high temperature

    CERN Document Server

    Ren, G Z; Wang, X C; Ma, H A; Guo, X B; Liu, J T; Zou Guang Tian

    2002-01-01

    The decomposition behaviour of CuO is studied at high temperature and high pressure. Experimental pressure and temperature determine the result. In the region of higher temperature and pressure (>=5.5 GPa, >=1400 deg. C), the product is just copper. In the region of lower temperature and pressure (< 5.0 GPa, < 1100 deg. C), CuO does not decompose. Between the two regions, the product is a mixture of Cu and Cu sub 2 O or a mixture of Cu sub 2 O and CuO.

  15. Theory of phonon properties in doped and undoped CuO nanoparticles

    Science.gov (United States)

    Bahoosh, S. G.; Apostolov, A. T.; Apostolova, I. N.; Wesselinowa, J. M.

    2012-07-01

    We have studied the phonon properties of CuO nanoparticles and have shown the importance of the anharmonic spin-phonon interaction. The Raman peaks of CuO nanoparticles shift to lower frequency and become broader as the particle size decreases in comparison with those of bulk CuO crystals owing to size effects. By doping with different ions, in dependence of their radius compared to the host ionic radius the phonon energies ω could be reduced or enhanced. The phonon damping is always enhanced through the ion doping effects.

  16. Exchange bias effect in composites of cuo nanoparticles and nanosilica glass

    Science.gov (United States)

    Ranjan Saha, Dhriti; Kumar Nandi, Arun; Chakravorty, Dipankar

    2014-04-01

    Nanodimensional silica based glass containing iron ions was prepared within the compressed pellet of CuO nanoparicles. The nanocomposite material showed exchange bias effect. This effect arose due to ferromagnetic iron doped CuO phase and antiferromagnetic CuO interface formation within the nanocomposite during the synthesis process. Coercive field as a function of temperature was fitted with Arhenius-Neel equation and extracted blocking temperature was 511 K. The value of effective anisotropy constant for the nanocomposite was found to be 3.64x105 erg/cc.

  17. Transforming from paramagnetism to room temperature ferromagnetism in CuO by ball milling

    Directory of Open Access Journals (Sweden)

    Daqiang Gao

    2011-12-01

    Full Text Available In this work, we experimentally demonstrate that it is possible to induce ferromagnetism in CuO by ball milling without any ferromagnetic dopant. The magnetic measurements indicate that paramagnetic CuO is driven to the ferromagnetic state at room temperature by ball milling gradually. The saturation magnetization of the milled powders is found to increase with expanding the milling time and then decrease by annealing under atmosphere. The fitted X-ray photoelectron spectroscopy results indicate that the observed induction and weaken of the ferromagnetism shows close relationship with the valence charged oxygen vacancies (Cu1+-VO in CuO.

  18. Lattice dynamics of La 2CuO 4 and YBa 2Cu 3O 7

    Science.gov (United States)

    Kimura, Shunji; Sota, Takayuki; Suzuki, Katsuo

    1990-08-01

    We report lattice dynamics calculations of La 2CuO 4 and YBa 2Cu 3O 7 where the mode assignment is fully performed. It is found that frequencies of the in-plane bond streching 0 vibration mode phonons are much higher than those of the bond bending 0 vibration mode phonons in La 2CuO 4 while they are close in YBa 2Cu 3O 7. The bond streching mode phonons and the bond bending mode phonons can couple to electrons near E F in YBa 2Cu 3O 7 but the latter can not in La 2CuO 4.

  19. Density of states in La2CuO4+y

    Science.gov (United States)

    Gold, A.; Ghazali, A.

    1991-06-01

    We describe the excess holes in the CuO2 sheets of La2CuO4+y as a two-dimensional hole gas in a quantum well in the presence of negatively charged impurities. We calculate the density of states with a multiple-scattering approach. We discuss the broadening of the impurity band with increasing y, which corresponds to an increasing hole concentration. The spectral density, which describes for vanishing hole concentration the Fourier transform of the squared wave function, is evaluated. We compare our results with recent measurements of La2CuO4+y with y<0.007.

  20. Hollow fibers for compact infrared gas sensors

    Science.gov (United States)

    Lambrecht, A.; Hartwig, S.; Herbst, J.; Wöllenstein, J.

    2008-02-01

    Hollow fibers can be used for compact infrared gas sensors. The guided light is absorbed by the gas introduced into the hollow core. High sensitivity and a very small sampling volume can be achieved depending on fiber parameters i.e. attenuation, flexibility, and gas exchange rates. Different types of infrared hollow fibers including photonic bandgap fibers were characterized using quantum cascade lasers and thermal radiation sources. Obtained data are compared with available product specifications. Measurements with a compact fiber based ethanol sensor are compared with a system simulation. First results on the detection of trace amounts of the explosive material TATP using hollow fibers and QCL will be shown.

  1. Absence of dipolar ordering in Co doped CuO

    Science.gov (United States)

    Chaudhary, N. Vijay Prakash; Murthy, J. Krishna; Venimadhav, A.

    2016-12-01

    Polycrystalline CuO samples with Co doping were prepared by solid state method with flowing oxygen condition and examined their structural and multiferroic properties. Structural studies have confirmed single phase monoclinic crystal structure of all samples, however, in Co doped samples a decrease in volume with an increase in monoclinic distortion is found. For pristine sample, temperature dependent magnetization has confirmed two antiferromagnetic (AFM) transitions at 213 K and 230 K and frequency independent dielectric peaks at these AFM transitions suggesting the ferroelectric nature. Magnetization of the Co doped samples has showed a marginal increase in ordering temperature of the high-temperature AFM transition and decrease in low temperature AFM ordering temperature. Further, doped samples have shown giant dielectric constant with no signature of ferroelectricity. The X-ray photoelectric spectroscopy study has revealed multiple valance states for both Co and Cu in the doped samples that simultaneously explain the giant dielectric constant and suppression of ferroelectric order.

  2. Hollow system with fin. Transient Green function method combination for two hollow cylinders

    Directory of Open Access Journals (Sweden)

    Buikis Andris

    2017-01-01

    Full Text Available In this paper we develop mathematical model for three dimensional heat equation for the system with hollow wall and fin and construct its analytical solution for two hollow cylindrical sample. The method of solution is based on Green function method for one hollow cylinder. On the conjugation conditions between both hollow cylinders we construct solution for system wall with fin. As result we come to integral equation on the surface between both hollow cylinders. Solution is obtained in the form of second kind Fredholm integral equation. The generalizing of Green function method allows us to use Green function method for regular non-canonical domains.

  3. SELDI-TOF MS-based discovery of a biomarker in Cucumis sativus seeds exposed to CuO nanoparticles.

    Science.gov (United States)

    Moon, Young-Sun; Park, Eun-Sil; Kim, Tae-Oh; Lee, Hoi-Seon; Lee, Sung-Eun

    2014-11-01

    Metal oxide nanoparticles (NPs) can inhibit plant seed germination and root elongation via the release of metal ions. In the present study, two acute phytotoxicity tests, seed germination and root elongation tests, were conducted on cucumber seeds (Cucumis sativus) treated with bulk copper oxide (CuO) and CuO NPs. Two concentrations of bulk CuO and CuO NPs, 200 and 600ppm, were used to test the inhibition rate of root germination; both concentrations of bulk CuO weakly inhibited seed germination, whereas CuO NPs significantly inhibited germination, showing a low germination rate of 23.3% at 600ppm. Root elongation tests demonstrated that CuO NPs were much stronger inhibitors than bulk CuO. SELDI-TOF MS analysis showed that 34 proteins were differentially expressed in cucumber seeds after exposure to CuO NPs, with the expression patterns of at least 9 proteins highly differing from those in seeds treated with bulk CuO and in control plants. Therefore, these 9 proteins were used to identify CuO NP-specific biomarkers in cucumber plants exposed to CuO NPs. A 5977-m/z protein was the most distinguishable biomarker for determining phytotoxicity by CuO NPs. Principal component analysis (PCA) of the SELDI-TOF MS results showed variability in the modes of inhibitory action on cucumber seeds and roots. To our knowledge, this is the first study to demonstrate that the phytotoxic effect of metal oxide NPs on plants is not caused by the same mode of action as other toxins.

  4. Surfactant-free Synthesis of CuO with Controllable Morphologies and Enhanced Photocatalytic Property

    Science.gov (United States)

    Wang, Xing; Yang, Jiao; Shi, Liuxue; Gao, Meizhen

    2016-03-01

    A green synthesis for nanoleave, nanosheet, spindle-like, rugby-like, dandelion-like and flower-like CuO nanostructures (from 2D to 3D) is successfully achieved through simply hydrothermal synthetic method without the assistance of surfactant. The morphology of CuO nanostructures can be easily tailored by adjusting the amount of ammonia and the source of copper. By designing a time varying experiment, it is verified that the flower- and dandelion-like CuO structures are synthesized by the self-assembly and Ostwald ripening mechanism. Structural and morphological evolutions are investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-visible diffuse reflectance spectra. Additionally, the CuO nanostructures with different morphologies could serve as a potential photocatalyst on the photodecomposition of rhodamine B (RhB) aqueous solutions in the presence of H2O2 under visible light irradiation.

  5. Solution-processable carboxylate-capped CuO nanoparticles obtained by a simple solventless method

    Science.gov (United States)

    Estruga, Marc; Roig, Anna; Domingo, Concepción; Ayllón, José A.

    2012-08-01

    Carboxylate-capped CuO nanoparticles were obtained via a simple solventless route, based on the thermal decomposition at 120 °C of solid precursors. The reaction mixture consisted of copper acetate monohydrate, acting as the CuO precursor, and different organic carboxylic acids (lauric, phenylvaleric or 3,6,9-trioxadecanoic acid) used as the capping agent. The proposed method, in good agreement with environmentally friendly practices, produced dry nanoparticles, thereby totally eliminating the need of washing, filtration, or other downstream steps. Transmission electron micrographs show crystalline roughly spherical CuO nanoparticles with average diameters between 3.1 and 5.5 nm depending on the capping ligand. The laurate-capped CuO nanoparticles showed a paramagnetic behaviour at room temperature, while a weak ferromagnetic component was detected at low temperature (acid tail enabled the straightforward dispersibility of nanoparticles in common solvents and assisted in the deposition of the material as thin films.

  6. Ultrasonochemical-Assisted Synthesis of CuO Nanorods with High Hydrogen Storage Ability

    Directory of Open Access Journals (Sweden)

    Gang Xiao

    2011-01-01

    Full Text Available Uniform CuO nanorods with different size have been synthesized in a water-alcohol solution through a fast and facile ultrasound irradiation assistant route. Especially, the as-prepared CuO nanorods have shown a strong size-induced enhancement of electrochemical hydrogen storage performance and exhibit a notable hydrogen storage capacity and big BET surface area. These results further implied that the as-prepared CuO nanorods could be a promising candidate for electrochemical hydrogen storage applications. The observation of the comparison experiments with different concentrations of NaOH, ethanol, CTAB, and HTMA while keeping other synthetic parameters unchanged leads to the morphology and size change of CuO products.

  7. Flower-like CuO synthesized by CTAB-assisted hydrothermal method

    Indian Academy of Sciences (India)

    Yunling Zou; Yan Li; Nan Zhang; Xiulin Liu

    2011-07-01

    Flower-like CuO nanostructures have been synthesized by cetyltrimethylammonium bromide (CTAB)-assisted hydrothermal method. Here, CuCl2.2H2O was used as copper raw material, and sodium hydroxide was used as precipitate. The resulting CuO powders were characterized by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). X-ray diffraction (XRD) pattern exhibited the nanocrystalline nature with monoclinic structure for the as-synthesized nanostructures. FESEM images indicated that the flower-like CuO nanostructures are composed of many interconnected nanosheets in size of several micrometres in length and width and 60–80 nm in thickness. The possible formation mechanism of flower-like CuO nanostructures was discussed.

  8. Enhanced reactive oxygen species overexpression by CuO nanoparticles in poorly differentiated hepatocellular carcinoma cells

    Science.gov (United States)

    Kung, Mei-Lang; Hsieh, Shu-Ling; Wu, Chih-Chung; Chu, Tian-Huei; Lin, Yu-Chun; Yeh, Bi-Wen; Hsieh, Shuchen

    2015-01-01

    Copper oxide nanoparticles (CuO NPs) are known to exhibit toxic effects on a variety of cell types and organs. To determine the oxidative impact of CuO NPs on hepatocellular carcinoma (HCC) cells, well-differentiated (HepG2) and poorly differentiated (SK-Hep-1) cells were exposed to CuO NPs. Cell viability assay showed that the median inhibition concentration (IC50) for SK-Hep-1 and HepG2 cells was 25 μg ml-1 and 85 μg ml-1, respectively. Cellular fluorescence intensity using DCFH-DA staining analysis revealed significant intracellular reactive oxygen species (ROS) generation of up to 242% in SK-Hep-1 cells, compared with 86% in HepG2 cells. HPLC analysis demonstrated that a CuO NP treatment caused cellular GSH depletion of 58% and a GSH/GSSG ratio decrease to ~0.1 in SK-Hep-1 cells. The oxidative stress caused by enhanced superoxide anion production was observed in both HepG2 (146%) and SK-Hep-1 (192%) cells. The Griess assay verified that CuO NPs induced NO production (170%) in SK-Hep-1 cells. Comet assay and western blot further demonstrated that CuO NPs induced severe DNA strand breakage (70%) in SK-Hep-1 cells and caused DNA damage via increased γ-H2AX levels. These results suggest that well-differentiated HepG2 cells possess a robust antioxidant defense system against CuO NP-induced ROS stress and exhibit more tolerance to oxidative stress. Conversely, poorly differentiated SK-Hep-1 cells exhibited a deregulated antioxidant defense system that allowed accumulation of CuO NP-induced ROS and resulted in severe cytotoxicity.Copper oxide nanoparticles (CuO NPs) are known to exhibit toxic effects on a variety of cell types and organs. To determine the oxidative impact of CuO NPs on hepatocellular carcinoma (HCC) cells, well-differentiated (HepG2) and poorly differentiated (SK-Hep-1) cells were exposed to CuO NPs. Cell viability assay showed that the median inhibition concentration (IC50) for SK-Hep-1 and HepG2 cells was 25 μg ml-1 and 85 μg ml-1, respectively

  9. Chlorination of iodide-containing waters in the presence of CuO: Formation of periodate

    KAUST Repository

    Liu, Chao

    2014-11-18

    It has been shown previously that the disproportionation of halogen-containing oxidants (e.g., HOCl, HOBr, and ClO2) is enhanced by a CuO-catalyzed process. In this study, the transformation of iodine during chlorination in the presence of CuO was investigated. There is no significant enhancement of the disproportionation of hypoiodous acid (HOI) in the presence of CuO. The formation rate of iodate (IO3 -) in the CuO-HOCl-I- system significantly increased when compared to homogeneous solutions, which was ascribed to the activation of HOCl by CuO enhancing its reactivity toward HOI. In this reaction system, iodate formation rates increase with increasing CuO (0-0.5 g L-1) and bromide (0-2 μM) doses and with decreasing pH (9.6-6.6). Iodate does not adsorb to the CuO surfaces used in this study. Nevertheless, iodate concentrations decreased after a maximum was reached in the CuO-HOCl-I-(-Br-) systems. Similarly, the iodate concentrations decrease as a function of time in the CuO-HOCl-IO3 - or CuO-HOBr-IO3 - system, and the rates increase with decreasing pH (9.6-6.6) due to the enhanced reactivity of HOCl or HOBr in the presence of CuO. It could be demonstrated that iodate is oxidized to periodate by a CuO-activated hypohalous acid, which is adsorbed on the CuO surface. No periodate could be measured in filtered solutions because it was mainly adsorbed to CuO. The adsorbed periodate was identified by scanning electron microscopy plus energy dispersive spectroscopy and X-ray photoelectron spectroscopy.

  10. Electronic anisotropy in single-crystal La2CuO4

    Science.gov (United States)

    Cheong, S.-W.; Fisk, Z.; Kwok, R. S.; Remeika, J. P.; Thompson, J. D.; Gruner, G.

    1988-04-01

    We have measured resistivity ρ components both parallel and perpendicular to the Cu-O planes in single-crystalline La2CuO4. Substantial anisotropy, reaching values as large as 103, is observed in the resistivity. The temperature dependence of ρ, together with Hall effect and thermoelectric power measurements, suggests hopping conduction between localized states at low temperatures, with diffusive transport at higher temperatures. These results are in contradistinction to previous reports.

  11. Chlorination of iodide-containing waters in the presence of CuO: formation of periodate.

    Science.gov (United States)

    Liu, Chao; Salhi, Elisabeth; Croué, Jean-Philippe; von Gunten, Urs

    2014-11-18

    It has been shown previously that the disproportionation of halogen-containing oxidants (e.g., HOCl, HOBr, and ClO2) is enhanced by a CuO-catalyzed process. In this study, the transformation of iodine during chlorination in the presence of CuO was investigated. There is no significant enhancement of the disproportionation of hypoiodous acid (HOI) in the presence of CuO. The formation rate of iodate (IO3(-)) in the CuO-HOCl-I(-) system significantly increased when compared to homogeneous solutions, which was ascribed to the activation of HOCl by CuO enhancing its reactivity toward HOI. In this reaction system, iodate formation rates increase with increasing CuO (0-0.5 g L(-1)) and bromide (0-2 μM) doses and with decreasing pH (9.6-6.6). Iodate does not adsorb to the CuO surfaces used in this study. Nevertheless, iodate concentrations decreased after a maximum was reached in the CuO-HOCl-I(-)(-Br(-)) systems. Similarly, the iodate concentrations decrease as a function of time in the CuO-HOCl-IO3(-) or CuO-HOBr-IO3(-) system, and the rates increase with decreasing pH (9.6-6.6) due to the enhanced reactivity of HOCl or HOBr in the presence of CuO. It could be demonstrated that iodate is oxidized to periodate by a CuO-activated hypohalous acid, which is adsorbed on the CuO surface. No periodate could be measured in filtered solutions because it was mainly adsorbed to CuO. The adsorbed periodate was identified by scanning electron microscopy plus energy dispersive spectroscopy and X-ray photoelectron spectroscopy.

  12. Traumatic and nontraumatic perforation of hollow viscera.

    Science.gov (United States)

    Espinoza, R; Rodríguez, A

    1997-12-01

    Hollow viscus injuries are usually managed with few complications. However, if their diagnosis is delayed, or if reparative suture closure should fail, the patient is placed at risk of multiple organ failure. This article presents diagnostic approaches, emphasizing imaging modalities, and therapeutic strategies for three clinical scenarios of hollow viscus perforation: 1) acute appendicitis, 2) gastroduodenal peptic ulcer disease, and 3) trauma.

  13. Adsorption characteristics of activated carbon hollow fibers

    OpenAIRE

    2009-01-01

    Carbon hollow fibers were prepared with regenerated cellulose or polysulfone hollow fibers by chemical activation using sodium phosphate dibasic followed by the carbonization process. The activation process increases the adsorption properties of fibers which is more prominent for active carbone fibers obtained from the cellulose precursor. Chemical activation with sodium phosphate dibasic produces an active carbon material with both mesopores and micropores.

  14. Hydrogen gas detection of Nb2O5 nanoparticle-decorated CuO nanorod sensors

    Science.gov (United States)

    Kheel, Hyejoon; Sun, Gun-Joo; Lee, Jae Kyung; Mirzaei, Ali; Choi, Seungbok; Lee, Chongmu

    2017-01-01

    Pristine and Nb2O5 nanoparticles-decorated CuO nanorods were prepared successfully by a two step process: the thermal evaporation of a Cu foil and the spin coating of NbCl5 solution on CuO nanorods followed by thermal annealing. X-ray diffraction was performed to examine the structure and purity of the synthesized nanoatuctures. Scanning electron microscopy was used to examine the morphology and shape of the nanostuctures. The Nb2O5 nanoparticles-decorated CuO nanorod sensor showed responses of 217.05-862.54%, response times of 161-199 s and recovery times of 163-171 s toward H2 gas with concentrations in a range of 0.5 - 5% at the optimal working temperature of 300 °C. The Nb2O5 nanoparticle-decorated CuO nanorod sensor showed superior sensing performance to the pristine CuO nanorod sensor for the same H2 concentration range. The underlying mechanism for the enhanced hydrogen sensing performance of the CuO nanorods decorated with Nb2O5 nanoparticles is discussed.

  15. Combination of CuO nanoparticles and fluconazole: preparation, characterization, and antifungal activity against Candida albicans

    Energy Technology Data Exchange (ETDEWEB)

    Weitz, Iris S., E-mail: irisweitz@braude.ac.il; Maoz, Michal; Panitz, Daniel [ORT Braude College, Department of Biotechnology Engineering (Israel); Eichler, Sigal; Segal, Ester [Technion – Israel Institute of Technology, Department of Biotechnology and Food Engineering (Israel)

    2015-08-15

    Combination therapy becomes an important strategy in the management of invasive fungal infections and emergence of resistant fungi mutants. In this work, we examine the combination of copper oxide (CuO) nanoparticles (NPs) with fluconazole as potential treatment against the pathogenic fungi, Candidaalbicans. CuO NPs (∼7 nm in size) were synthesized with acetate ligands assembled on their surface, as shown by both thermal gravimetric analysis and FTIR spectroscopy. Unlike the commercial CuO (both bulk and 50 nm particles), that are poorly dispersed in water, the interaction with water allows the fine dispersion of the coated CuO NPs and their excellent colloidal stability. The addition of fluconazole to the aqueous CuO dispersion induced spontaneous self-assembly of the NPs into linear pearl-like chains network, shown by cryogenic transmission electron microscopy (cryo-TEM). The antifungal activity of the CuO NPs and their combination with fluconazole (fluconazole–CuO NPs) was studied against C. albicans. The best MIC values were obtained at concentrations as low as 0.2 and 0.3 mg/mL, respectively. The results suggest that fluconazole–CuO NPs can provide a potential alternative treatment for C. albicans infections.

  16. Synthesis of CuO nanoflower and its application as a H2O2 sensor

    Indian Academy of Sciences (India)

    Aixia Gu; Guangfeng Wang; Xiaojun Zhang; Bin Fang

    2010-02-01

    CuO three-dimensional (3D) flower-like nanostructures were successfully synthesized by a simple method at 100°C with Cu(NO3)2.3H2O and NH3.H2O for 6 h in the absence of any additives. We found that NH3.H2O amount was critical for CuO morphology evolution. The phase analysis was carried out using X-ray diffraction (XRD) and the result confirmed that the CuO nanoflowers were single-phase. The morphological investigations by field emission scanning electron microscope (FESEM) revealed that the CuO nanoflowers were mono-dispersed in a large quantity and consisted of nanosheets. And then, CuO nanoflowers were successfully used to modify a gold electrode to detect H2O2 with cyclic voltammetry (CV) and amperometric (AC). It was found that CuO nanoflowers may be of great potential for H2O2 electrochemical sensing.

  17. RF sputtered CuO thin films: Structural, optical and photo-catalytic behavior

    Science.gov (United States)

    Al-Ghamdi, Attieh A.; Khedr, M. H.; Shahnawaze Ansari, M.; Hasan, P. M. Z.; Abdel-wahab, M. Sh.; Farghali, A. A.

    2016-07-01

    Nanocrystalline CuO thin films were deposited for 600, 1200 and 1800 s on glass substrate using RF magnetron sputtering technique. The films deposited at room temperature were crystalline and showed Tenorite phase of CuO. The increase in average particle size from 6.67 nm to 9.09 nm and the thickness from 160 nm to 490 nm was observed with the increase in deposition time. The optical band gap was decreased from 2.2 eV to 1.73 eV as the film thickness was increased. The intensity of PL peak showed its maximum for the film deposited for 600 s and minimum for 1800 s. Some unusual emission peaks were observed due to the quantization effect and lattice/surface defects. The CuO films with different thicknesses could be used as photo-catalysts for the degradation of Methylene blue (MB) from the wastewater. Under the exposure of 200 W energy of tungsten lamp, CuO thin films showed excellent photo-catalytic activities. CuO thin film of minimum thickness of around 160 nm responded as a best catalyst for MB degradation. The films were very stable and have a speciality to be recycled without much loss of their photo-catalytic activity. These characteristics have proved the high possibility of commercial applications of CuO thin films in environmental remediation.

  18. Synthesis and characterization of CuO nano particles using precipitation method

    Energy Technology Data Exchange (ETDEWEB)

    Malviya, Nitin; Oswal, Nidhi [Department of Applied Physics, Shri G.S. Institute of Technology & Science, Indore – 452003 (India); Carpenter, Gopal; Gupta, Nitish, E-mail: nitish.nidhi75@gmail.com [Department of Applied Chemistry, Shri G.S. Institute of Technology & Science, Indore-452003 (India)

    2015-06-24

    A simple and efficient synthesis of CuO nanoparticles was carried out by precipitation method using copper metal chips as precursor and sodium hydroxide as a stabilizing agent at different calcinations temperatures (100°C, 150°C, and 175°C). The products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier Transform Infrared Spectroscopy (FTIR). XRD indicated monoclinic structure of CuO. SEM indicated the variation in nanostructures with the heating temperatures and FTIR inidcated Cu-O stretching frequencies. The CuO nanostructures with the average particle size of about 16.52 nm were prepared at 100°C for 3 hr. When the calcinations temperature was increased to 150°C and 175°C, CuO nanostructures with the particle size of about 17.41 nm, and 18.44 nm were obtained respectively. This aqueous precipitation method can give a large scale production of CuO nanoparticles easily.

  19. Combination of CuO nanoparticles and fluconazole: preparation, characterization, and antifungal activity against Candida albicans

    Science.gov (United States)

    Weitz, Iris S.; Maoz, Michal; Panitz, Daniel; Eichler, Sigal; Segal, Ester

    2015-08-01

    Combination therapy becomes an important strategy in the management of invasive fungal infections and emergence of resistant fungi mutants. In this work, we examine the combination of copper oxide (CuO) nanoparticles (NPs) with fluconazole as potential treatment against the pathogenic fungi, Candida albicans. CuO NPs ( 7 nm in size) were synthesized with acetate ligands assembled on their surface, as shown by both thermal gravimetric analysis and FTIR spectroscopy. Unlike the commercial CuO (both bulk and 50 nm particles), that are poorly dispersed in water, the interaction with water allows the fine dispersion of the coated CuO NPs and their excellent colloidal stability. The addition of fluconazole to the aqueous CuO dispersion induced spontaneous self-assembly of the NPs into linear pearl-like chains network, shown by cryogenic transmission electron microscopy (cryo-TEM). The antifungal activity of the CuO NPs and their combination with fluconazole (fluconazole-CuO NPs) was studied against C. albicans. The best MIC values were obtained at concentrations as low as 0.2 and 0.3 mg/mL, respectively. The results suggest that fluconazole-CuO NPs can provide a potential alternative treatment for C. albicans infections.

  20. Fabrication of CuO nanoplatelets for highly sensitive enzyme-free determination of glucose

    Energy Technology Data Exchange (ETDEWEB)

    Wang Juan [School of Chemistry and Chemical Engineering, South China University of Technology, 381 Wushan Road, Guangzhou 510640 (China); Zhang Weide, E-mail: zhangwd@scut.edu.cn [School of Chemistry and Chemical Engineering, South China University of Technology, 381 Wushan Road, Guangzhou 510640 (China)

    2011-09-01

    Highlights: > Adhered growth of CuO nanoplatelets on Cu foils. > Enzyme-free glucose sensor with very high sensitivity. > Excellent stability and good anti-interference ability. - Abstract: CuO nanoplatelets were grown on Cu foils by a one step, template free process. The structure and morphology of the CuO nanoplatelets were characterized by X-ray diffraction, scanning and transmission electron microscopy. The CuO nanoplatelets grown on Cu foil were integrated to be an electrode for glucose sensing. The electrocatalytic activity of the CuO nanoplatelets electrode for glucose in alkaline media was investigated by cyclic voltammetry and chronoamperometry. The electrode exhibits a sensitivity of 3490.7 {mu}A mM{sup -1} cm{sup -2} to glucose which is much higher than that of most reported enzyme-free glucose sensors and the linear range was obtained over a concentration up to 0.80 mM with a detection limit of 0.50 {mu}M (signal/noise = 3). Exhilaratingly, the electrode based on the CuO nanoplatelets is resistant against poisoning by chloride ion, and the interference from the oxidation of common interfering species, such as uric acid, ascorbic acid, dopamine and carbonhydrate compounds, can also be effectively avoided. Finally, the electrode was applied to analyze glucose concentration in human serum samples.

  1. CuO nanoparticles: Synthesis, characterization, optical properties and interaction with amino acids

    Energy Technology Data Exchange (ETDEWEB)

    El-Trass, A.; ElShamy, H.; El-Mehasseb, I. [Nanochemistry Laboratory, Chemistry Department, Faculty of Science, Kafrelsheikh, University, 33516 Kafr ElSheikh (Egypt); El-Kemary, M., E-mail: elkemary@yahoo.com [Nanochemistry Laboratory, Chemistry Department, Faculty of Science, Kafrelsheikh, University, 33516 Kafr ElSheikh (Egypt)

    2012-01-15

    Cupric oxide (CuO) nanoparticles with an average size of 6 nm have been successfully prepared by an alcothermal method. The prepared CuO nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared (FT-IR) and UV-visible absorption spectroscopy. A strong sharp emission under UV excitation is reported from the prepared CuO nanoparticles. The results show that the CuO nanoparticles have high dispersion and narrow size distribution. The fluorescence emission spectra display an intense sharp emission at 365 nm and weak broad intensity emission at 470 nm. Picosecond fluorescence measurements of the nanoparticles suggest bi-exponential function giving time constants of {tau}{sub 1} (330 ps, 94.21%) and {tau}{sub 2} (4.69 ns, 5.79%). In neutral and alkaline solutions, Zeta potential values of CuO nanoparticles are negative, due to the adsorption of COO{sup -} group via the coordination of bidentate. At low pH the zeta potential value is positive due to the increased potential of H{sup +} ions in solution. Comparative UV-visible absorption experiments with the model amino acid compounds of positive and negative charges as arginine and aspartic acid, respectively confirmed the negative surface of CuO nanoparticles. The results should be extremely useful for understanding the mode of the interaction with biological systems. This binding process also affects the particle's behavior inside the body.

  2. Short-term effects on antioxidant enzymes and long-term genotoxic and carcinogenic potential of CuO nanoparticles compared to bulk CuO and ionic copper in mussels Mytilus galloprovincialis.

    Science.gov (United States)

    Ruiz, Pamela; Katsumiti, Alberto; Nieto, Jose A; Bori, Jaume; Jimeno-Romero, Alba; Reip, Paul; Arostegui, Inmaculada; Orbea, Amaia; Cajaraville, Miren P

    2015-10-01

    The aim of this work was to study short-term effects on antioxidant enzyme activities and long-term genotoxic and carcinogenic potential of CuO nanoparticles (NPs) in comparison to bulk CuO and ionic copper in mussels Mytilus galloprovincialis after 21 days exposure to 10 μg Cu L(-1). Then, mussels were kept for up to 122 days in clean water. Cu accumulation depended on the form of the metal and on the exposure time. CuO NPs were localized in lysosomes of digestive cells, as confirmed by TEM and X ray microanalysis. CuO NPs, bulk CuO and ionic copper produced different effects on antioxidant enzyme activities in digestive glands, overall increasing antioxidant activities. CuO NPs significantly induced catalase and superoxide dismutase activities. Fewer effects were observed in gills. Micronuclei frequency increased significantly in mussels exposed to CuO NPs and one organism treated with CuO NPs showed disseminated neoplasia. However, transcription levels of cancer-related genes did not vary significantly. Thus, short-term exposure to CuO NPs provoked oxidative stress and genotoxicity, but further studies are needed to determine whether these early events can lead to cancer development in mussels.

  3. Fabrication of functional hollow carbon spheres with large hollow interior as active colloidal catalysts

    Institute of Scientific and Technical Information of China (English)

    Qiang Sun; Guanghui Wang; Wencui Li; Xiangqian Zhang; Anhui Lu

    2012-01-01

    In this study,we have established a facile method to synthesize functional hollow carbon spheres with large hollow interior,which can act as active colloidal catalysts.The method includes the following steps:first,hollow polymer spheres with large hollow interior were prepared using sodium oleate as the hollow core generator,and 2,4-dihydroxybenzoic acid and hexamethylene tetramine (HMT) as the polymer precursors under hydrothermal conditions; Fe3+ or Ag+ cations were then introduced into the as-prepared hollow polymer spheres through the carboxyl groups; finally,the hollow polymer spheres can be pseudomorphically converted to hollow carbon spheres during pyrolysis process,meanwhile iron or silver nanoparticles can also be formed in the carbon shell simultaneously.The structures of the obtained functional hollow carbon spheres were characterized by TEM,XRD,and TG.As an example,Ag-doped hollow carbon spheres were used as colloid catalysts which showed high catalytic activity in 4-nitrophenol reduction reaction.

  4. POROUS WALL, HOLLOW GLASS MICROSPHERES

    Energy Technology Data Exchange (ETDEWEB)

    Sexton, W.

    2012-06-30

    Hollow Glass Microspheres (HGM) is not a new technology. All one has to do is go to the internet and Google{trademark} HGM. Anyone can buy HGM and they have a wide variety of uses. HGM are usually between 1 to 100 microns in diameter, although their size can range from 100 nanometers to 5 millimeters in diameter. HGM are used as lightweight filler in composite materials such as syntactic foam and lightweight concrete. In 1968 a patent was issued to W. Beck of the 3M{trademark} Company for 'Glass Bubbles Prepared by Reheating Solid Glass Particles'. In 1983 P. Howell was issued a patent for 'Glass Bubbles of Increased Collapse Strength' and in 1988 H. Marshall was issued a patent for 'Glass Microbubbles'. Now Google{trademark}, Porous Wall, Hollow Glass Microspheres (PW-HGMs), the key words here are Porous Wall. Almost every article has its beginning with the research done at the Savannah River National Laboratory (SRNL). The Savannah River Site (SRS) where SRNL is located has a long and successful history of working with hydrogen and its isotopes for national security, energy, waste management and environmental remediation applications. This includes more than 30 years of experience developing, processing, and implementing special ceramics, including glasses for a variety of Department of Energy (DOE) missions. In the case of glasses, SRS and SRNL have been involved in both the science and engineering of vitreous or glass based systems. As a part of this glass experience and expertise, SRNL has developed a number of niches in the glass arena, one of which is the development of porous glass systems for a variety of applications. These porous glass systems include sol gel glasses, which include both xerogels and aerogels, as well as phase separated glass compositions, that can be subsequently treated to produce another unique type of porosity within the glass forms. The porous glasses can increase the surface area compared to &apos

  5. Hollow Micro-/Nanostructures: Synthesis and Applications

    KAUST Repository

    Lou, Xiong Wen (David)

    2008-11-03

    Hollow micro-nanostructures are of great interest in many current and emerging areas of technology. Perhaps the best-known example of the former is the use of fly-ash hollow particles generated from coal power plants as partial replacement for Portland cement, to produce concrete with enhanced strength and durability. This review is devoted to the progress made in the last decade in synthesis and applications of hollow micro-nanostructures. We present a comprehensive overview of synthetic strategies for hollow structures. These strategies are broadly categorized into four themes, which include well-established approaches, such as conventional hard-templating and soft-templating methods, as well as newly emerging methods based on sacrificial templating and template-free synthesis. Success in each has inspired multiple variations that continue to drive the rapid evolution of the field. The Review therefore focuses on the fundamentals of each process, pointing out advantages and disadvantages where appropriate. Strategies for generating more complex hollow structures, such as rattle-type and nonspherical hollow structures, are also discussed. Applications of hollow structures in lithium batteries, catalysis and sensing, and biomedical applications are reviewed. © 2008 WILEY-VCH Verlag GmbH & Co. KGaA,.

  6. Synthesis and characterization of CuO nanoparticles using strong base electrolyte through electrochemical discharge process

    Indian Academy of Sciences (India)

    PURUSHOTTAM KUMAR SINGH; PANKAJ KUMAR; MANOWAR HUSSAIN; ALOK KUMAR DAS; GANESH CHANDRA NAYAK

    2016-04-01

    In the present study, cupric oxide (CuO) nanoparticles were synthesized by electrochemical discharge process using strong base electrolytes. The experiments were carried out separately using NaOH and KOH electrolytes.The mass output rate and the crystal size were obtained with variation of the rotation speed of magnetic stirrer for both types of electrolytes. The mass output rate of CuO nanoparticles increased with the increase in the speed of rotation, and, after an optimum speed, it started decreasing. However, the size of the particles reduced with the increase of the rotation speed. The crystal plane of the obtained CuO nanoparticles was similar for both the electrolytes whereas the yield of nanoparticles was higher in KOH as compared with NaOH under the sameexperiment conditions. In this set of experiments, the maximum output rates obtained were 21.66 mg h$^{−1}$ for NaOH and 24.66 mg h$^{−1}$ for KOH at 200 rpm for a single discharge arrangement. The average crystal size of CuO particles obtained was in the range of 13–18 nm for KOH electrolyte and 15–20 nm for NaOH electrolyte. Scanning electron microscopy images revealed that flower-like and caddice clew-shaped CuO nanocrystalline particles weresynthesized by the electrochemical discharge process. Fourier transform infrared spectrum showed that the CuO nanoparticles have a pure and monolithic phase. UV–vis–NIR spectroscopy was used to monitor oxidation course of Cu→CuO and the band gap energy was measured as 2 and 2.6 eV for CuO nanoparticle synthesized in NaOH and KOH solutions, respectively.

  7. Synthesis and electrochemical properties of SnO2-CuO nanocomposite powders

    Institute of Scientific and Technical Information of China (English)

    MA Ming-you; HE Ze-qiang; XIAO Zhuo-bing; HUANG Ke-long; XIONG Li-zhi; WU Xian-ming

    2006-01-01

    SnO2-CuO nanocomposite powders were prepared by chemical coprecipitation method using SnCl4·5H2O, NH3·H2O and Cu(NO3)2·3H2O as raw materials. The powders were characterized by thermogravimertric(TG) analysis and differential thermal analysis(DTA), X-ray diffraction(XRD), and scanning electron microscope(SEM). The electrochemical properties of SnO2-CuO and undoped SnO2 powders as anode materials of lithium ion batteries were investigated comparatively by galvanostatic charge-discharge experiments and AC impedance. The results show that SnO2-CuO nanocomposite powders with the average particle size of 87 nm can be obtained by this method. The structure of SnO2 does not change with the introduction of CuO, but the average particle size of nano-SnO2 decreases. SnO2-CuO nanocomposite powders show a reversible capacity of 752 mA·h/g and better cycleability compared with nano-SnO2. The capacity retention rates after 60 cycles of nano-SnO2-CuO and SnO2 are 93.6% and 92.0% at the chargedischarge rate of 0.1 C, respectively, which suggests that the introduction of CuO into SnO2 can improve the cycleability of nanoSnO2.

  8. On the low-lying states of CuO

    Science.gov (United States)

    Bagus, P. S.; Nelin, C. J.; Bauschlicher, C. W., Jr.

    1984-01-01

    Self consistent field and correlated wave functions have been computed for the ground and for several low-lying states of CuO. The ground state is X(2)PI and the lowest excited state, at approximately 8,000/cm above X(2)PI, is a previously unidentified 2-sigma(+) state. The separation of these states is compared to that for the similar states of KO and is analysed in terms of integrals between orbitals of the separated free ions. A classification of the states of the molecule based on states of Cu(+) and O(-) which leads to a division into manifolds of states arising from Cu(+) 3d(10) and Cu(+) 3d(9) 4s(1) is considered. It is predicted that the state of the 3d(9) 4s(1) manifold are 10,000 to 30,000/cm above the ground state and assign the observed A2-sigma(+) state at 16,500/cm to this manifold.

  9. Designing hollow nano gold golf balls.

    Science.gov (United States)

    Landon, Preston B; Mo, Alexander H; Zhang, Chen; Emerson, Chris D; Printz, Adam D; Gomez, Alan F; DeLaTorre, Christopher J; Colburn, David A M; Anzenberg, Paula; Eliceiri, Matthew; O'Connell, Connor; Lal, Ratnesh

    2014-07-09

    Hollow/porous nanoparticles, including nanocarriers, nanoshells, and mesoporous materials have applications in catalysis, photonics, biosensing, and delivery of theranostic agents. Using a hierarchical template synthesis scheme, we have synthesized a nanocarrier mimicking a golf ball, consisting of (i) solid silica core with a pitted gold surface and (ii) a hollow/porous gold shell without silica. The template consisted of 100 nm polystyrene beads attached to a larger silica core. Selective gold plating of the core followed by removal of the polystyrene beads produced a golf ball-like nanostructure with 100 nm pits. Dissolution of the silica core produced a hollow/porous golf ball-like nanostructure.

  10. Hollow Core, Whispering Gallery Resonator Sensors

    CERN Document Server

    Ward, Jonathan M; Chormaic, Síle Nic

    2014-01-01

    A review of hollow core whispering gallery resonators (WGRs)is given. After a short introduction to the topic of whispering gallery resonators we provide a description of whispering gallery modes in hollow or liquid core WGRs. Next, whispering gallery mode (WGM) sensing mechanisms are outlined and some fabrication methods for microbubbles, microcapillaries and other tubular WGM devices are discussed. We then focus on the most common applications of hollow core WGRs, namely refractive index and temperature sensing, gas sensing, force sensing, biosensing, and lasing. The review highlights some of the key papers in this field and gives the reader a general overview of the current state-of-the-art.

  11. Analysis of MESSENGER high-resolution images of Mercury's hollows and implications for hollow formation

    Science.gov (United States)

    Blewett, David T.; Stadermann, Amanda C.; Susorney, Hannah C.; Ernst, Carolyn M.; Xiao, Zhiyong; Chabot, Nancy L.; Denevi, Brett W.; Murchie, Scott L.; McCubbin, Francis M.; Kinczyk, Mallory J.; Gillis-Davis, Jeffrey J.; Solomon, Sean C.

    2016-09-01

    High-resolution images from MESSENGER provide morphological information on the nature and origin of Mercury's hollows, small depressions that likely formed when a volatile constituent was lost from the surface. Because graphite may be a component of the low-reflectance material that hosts hollows, we suggest that loss of carbon by ion sputtering or conversion to methane by proton irradiation could contribute to hollows formation. Measurements of widespread hollows in 565 images with pixel scales <20 m indicate that the average depth of hollows is 24 ± 16 m. We propose that hollows cease to increase in depth when a volatile-depleted lag deposit becomes sufficiently thick to protect the underlying surface. The difficulty of developing a lag on steep topography may account for the common occurrence of hollows on crater central peaks and walls. Disruption of the lag, e.g., by secondary cratering, could restart growth of hollows in a location that had been dormant. Images at extremely high resolution (~3 m/pixel) show that the edges of hollows are straight, as expected if the margins formed by scarp retreat. These highest-resolution images reveal no superposed impact craters, implying that hollows are very young. The width of hollows within rayed crater Balanchine suggests that the maximum time for lateral growth by 1 cm is ~10,000 yr. A process other than entrainment of dust by gases evolved in a steady-state sublimation-like process is likely required to explain the high-reflectance haloes that surround many hollows.

  12. Nanostructured CuO thin film electrodes prepared by spray pyrolysis: a simple method for enhancing the electrochemical performance of CuO in lithium cells

    Energy Technology Data Exchange (ETDEWEB)

    Morales, J.; Sanchez, L. [Cordoba Univ. (Spain). Departamento de Qumica Inorganica e Ingenieria Quimica; Martin, F.; Ramos-Barrado, J.R.; Sanchez, M. [Malaga Univ. (Spain). Lab. de Materiales y Superficie

    2004-10-15

    Nanostructured CuO thin films were prepared by using a spray pyrolysis method, copper acetate as precursor and stainless steel as substrate. The textural and structural properties of the films were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The SEM images revealed thorough coating of the substrate and thickness of 450-1250 nm; the average particle size as determined from the AFM images ranged from 30 to 160 nm. The XRD patterns revealed the formation of CuO alone and the XPS spectra confirmed the presence of Cu{sup 2+} as the main oxidation state on the surface. The films were tested as electrodes in lithium cells and their electrochemical properties evaluated from galvanostatic and step potential electrochemical spectroscopy (SPES) measurements. The discharge STEP curves exhibited various peaks consistent with the processes CuO {r_reversible} Cu{sub 2}O {r_reversible}Cu and with decomposition of the electrolyte, a reversible process in the light of the AFM images. The best electrode exhibited capacity values of 625 Ah kg{sup -1} over more than 100 cycles. This value, which involves a CuO {r_reversible} Cu reversible global reaction, is Ca. 50% higher than that reported for bulk CuO. The nanosize of the particles and the good adherence of the active material to the substrate are thought to be the key factors accounting for the enhanced electrochemical activity found. (author)

  13. Safe-by-Design CuO Nanoparticles via Fe-Doping, Cu-O Bond Length Variation, and Biological Assessment in Cells and Zebrafish Embryos.

    Science.gov (United States)

    Naatz, Hendrik; Lin, Sijie; Li, Ruibin; Jiang, Wen; Ji, Zhaoxia; Chang, Chong Hyun; Köser, Jan; Thöming, Jorg; Xia, Tian; Nel, Andre E; Mädler, Lutz; Pokhrel, Suman

    2017-01-24

    The safe implementation of nanotechnology requires nanomaterial hazard assessment in accordance with the material physicochemical properties that trigger the injury response at the nano/bio interface. Since CuO nanoparticles (NPs) are widely used industrially and their dissolution properties play a major role in hazard potential, we hypothesized that tighter bonding of Cu to Fe by particle doping could constitute a safer-by-design approach through decreased dissolution. Accordingly, we designed a combinatorial library in which CuO was doped with 1-10% Fe in a flame spray pyrolysis reactor. The morphology and structural properties were determined by XRD, BET, Raman spectroscopy, HRTEM, EFTEM, and EELS, which demonstrated a significant reduction in the apical Cu-O bond length while simultaneously increasing the planar bond length (Jahn-Teller distortion). Hazard screening was performed in tissue culture cell lines and zebrafish embryos to discern the change in the hazardous effects of doped vs nondoped particles. This demonstrated that with increased levels of doping there was a progressive decrease in cytotoxicity in BEAS-2B and THP-1 cells, as well as an incremental decrease in the rate of hatching interference in zebrafish embryos. The dissolution profiles were determined and the surface reactions taking place in Holtfreter's solution were validated using cyclic voltammetry measurements to demonstrate that the Cu(+)/Cu(2+) and Fe(2+)/Fe(3+) redox species play a major role in the dissolution process of pure and Fe-doped CuO. Altogether, a safe-by-design strategy was implemented for the toxic CuO particles via Fe doping and has been demonstrated for their safe use in the environment.

  14. Fabricating a hollow bulb obturator

    Directory of Open Access Journals (Sweden)

    Fatih Sari

    2012-01-01

    Full Text Available

    Obturators are generally used in the rehabilitation of the maxillectomy defects. Ideally, obturators should be light, properly fit and construction should be made easily. By decreasing the weight of the prosthesis, the retention and stability may be optimized to allow the obturator for function comfortably during mastication, phonation, and deglutition. In this case, a 65-year-old male patient underwent surgical removal of left part of the maxilla due to the squamous cell carcinoma. In this technique fabrication of a hollow bulb obturator prosthesis as a single unit in heat-cured acrylic resin using a single-step flasking procedure was described. The patient’s functional and esthetic expectations were satisfied.

  15. Hollow-core tapered coupler for large inner diameter hollow-core optical fibers

    Institute of Scientific and Technical Information of China (English)

    Guiyao Zhou(周桂耀); Zhiyun Hou(侯峙云); Lantian Hou(侯蓝田); Jigang Liu(刘继刚)

    2003-01-01

    A novel hollow-core tapered coupler has been theoretically designed and fabricated by fiber drawing machine. The coupler's inner wall is coated with a polycrystalline GeO2 film. The coupling loss of hollow-core tapered coupler is about 0.2 dB. Hollow-core tapered coupler reduces the transmission loss of hollow-core optical fiber (HCOF) by 0.5 dB/m, therefore the coupler is suitable for coupling high power CO2 laser in industrial application.

  16. Hollow Alveolus-Like Nanovesicle Assembly with Metal-Encapsulated Hollow Zeolite Nanocrystals.

    Science.gov (United States)

    Dai, Chengyi; Zhang, Anfeng; Liu, Min; Gu, Lin; Guo, Xinwen; Song, Chunshan

    2016-08-23

    Inspired by the vesicular structure of alveolus which has a porous nanovesicle structure facilitating the transport of oxygen and carbon dioxide, we designed a hollow nanovesicle assembly with metal-encapsulated hollow zeolite that would enhance diffusion of reactants/products and inhibit sintering and leaching of active metals. This zeolitic nanovesicle has been successfully synthesized by a strategy which involves a one-pot hydrothermal synthesis of hollow assembly of metal-containing solid zeolite crystals without a structural template and a selective desilication-recrystallization accompanied by leaching-hydrolysis to convert the metal-containing solid crystals into metal-encapsulated hollow crystals. We demonstrate the strategy in synthesizing a hollow nanovesicle assembly of Fe2O3-encapsulated hollow crystals of ZSM-5 zeolite. This material possesses a microporous (0.4-0.6 nm) wall of hollow crystals and a mesoporous (5-17 nm) shell of nanovesicle with macropores (about 350 nm) in the core. This hierarchical structure enables excellent Fe2O3 dispersion (3-4 nm) and resistance to sintering even at 800 °C; facilitates the transport of reactant/products; and exhibits superior activity and resistance to leaching in phenol degradation. Hollow nanovesicle assembly of Fe-Pt bimetal-encapsulated hollow ZSM-5 crystals was also prepared.

  17. Nanostructured CuO Thin Films Prepared through Sputtering for Solar Selective Absorbers

    Directory of Open Access Journals (Sweden)

    Senthuran Karthick Kumar

    2013-01-01

    Full Text Available Nanostructured cupric oxide (CuO thin films have been deposited on copper (Cu substrates at different substrate temperatures and oxygen to argon gas ratios through direct current (DC reactive magnetron sputtering. The deposited CuO thin films are characterized by using X-ray diffraction (XRD, scanning electron microscopy (SEM, energy dispersive spectroscopy (EDS, profilometry, and spectrophotometry techniques. The crystalline phases, morphology, optical properties, and photothermal conversion efficiency of the CuO thin films are found to be significantly influenced by the change in substrate temperature and oxygen to argon gas ratio. The variations in the substrate temperature and oxygen to argon gas ratio have induced changes in Cu+ and Cu2+ concentrations of the CuO thin films that result in corresponding changes in their optical properties. The CuO thin film prepared at a substrate temperature of 30°C and O2 to Ar gas ratio of 1 : 1 has exhibited high absorptance and low emittance; thus, it could be used as a solar selective absorber in solar thermal gadgets.

  18. Optical and structural properties of CuO nanofilm: Its diode application

    Energy Technology Data Exchange (ETDEWEB)

    Erdogan, Ibrahim Y. [Bingoel University, Faculty of Sciences and Arts, Department of Chemistry, 12000 Bingoel (Turkey); Guellue, O., E-mail: omergullu@gmail.co [Batman University, Faculty of Sciences and Arts, Department of Physics, 72060 Batman (Turkey)

    2010-03-04

    The high crystalline CuO nanofilms have been prepared by spin coating and annealing combined with a simple chemical method. The obtained films have been characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-vis (UV-vis) spectroscopy and photoluminescence (PL) spectroscopy. Structural analysis results demonstrate that the single phase CuO on Si (1 0 0) substrate is of high a crystalline structure with a dominant in monoclinic (1 1 1) orientation. FT-IR results confirm the formation of pure CuO phase. UV-vis absorption measurements indicate that the band gap of the CuO films is 2.64 eV. The PL spectrum of the CuO films shows a broad emission band centered at 467 nm, which is consistent with absorption measurement. Also, Au/CuO/p-Si metal/interlayer/semiconductor (MIS) diodes have been fabricated. Electronic properties (current-voltage) of these structures were investigated. In addition, the interfacial state properties of the MIS diode were obtained. The interface-state density of the MIS diode was found to vary from 6.21 x 10{sup 12} to 1.62 x 10{sup 12} eV{sup -1} cm{sup -2}.

  19. Cutin-derived CuO reaction products from purified cuticles and tree leaves

    Science.gov (United States)

    Goñi, Miguel A.; Hedges, John I.

    1990-11-01

    Long chain (C 16-C 18) hydroxy fatty acids are obtained among the nonlignin-derived reaction products from the CuO oxidation of a variety of geochemical samples. In order to investigate the origin of these acids, the CuO reaction products of isolated cuticles and whole leaves were investigated. The reaction products from the CuO oxidation of purified apple ( Malus pumila) cuticle include 16-hydroxy-hexadecanoic acid, 10,16-dihydroxyhexadecanoic acid, 9,10,18-trihydroxyoctadec-12-enoic acid, and 9,10,18-trihydroxyoctadecanoic acid as major components. The distribution of these cutin-derived CuO reaction products is similar to the monomer compositions deduced from traditional methods of cutin analysis. Oxidation of whole English Holly ( Ilex aquifolium) leaves yields cutin-derived acidic reaction products (in addition to lignin-derived phenols) similar to those obtained from oxidation of the corresponding isolated cuticles, indicating that CuO oxidation of bulk plant tissue is a viable procedure of cutin analysis in geochemical applications.

  20. Preparation and characterization of CuO catalyst for the thermolysis treatment of distillery wastewater.

    Science.gov (United States)

    Sharma, Deepak; Prajapati, Abhinesh Kumar; Choudhary, Rumi; Kaushal, Rajesh Kumar; Pal, Dharm; Sawarkar, Ashish N

    2017-08-16

    CuO catalyst was prepared from copper sulfate by alkali precipitation method followed by drying and calcination. Characterization of CuO catalyst using X-ray diffraction, Brunauer-Emmett-Teller, and Barrett-Joyner-Halenda surface area analysis envisaged the effectiveness of CuO as a catalyst for the treatment of biodigester effluent (BDE) emanated from distilleries. The catalytic thermolysis is an efficient advance treatment method for distillery biodigester effluent (BDE). CT treatment of BDE was carried out in a 0.5 dm(3) thermolytic batch reactor using CuO as a catalyst at different pH (1-9), temperatures (80-110°C), and catalyst loadings (1-4 kg/m(3)). With CuO catalyst, a temperature of 110°C, catalyst loading of 4 kg/m(3), and pH of 2 was found to be optimal, providing a maximum reduction in chemical oxygen demand of 65%. The settling characteristics at different temperatures of CT-treated sludge were also presented.

  1. Structural, optical and room-temperature ferromagnetic properties of Fe-doped CuO nanostructures

    Science.gov (United States)

    Mohamed Basith, N.; Judith Vijaya, J.; John Kennedy, L.; Bououdina, M.

    2013-09-01

    Pure CuO and Fe-doped CuO nanostructures with different weight ratios (0.5, 1.0, 1.5, and 2.0 at wt% of Fe) were synthesized via the microwave combustion method. The synthesized samples were characterized by X-ray diffraction (XRD), high resolution scanning electron microscopy (HR-SEM), diffuse reflectance spectroscopy (DRS), photoluminescence (PL) spectroscopy and vibrating sample magnetometry (VSM). XRD patterns refined by the Rietveld method indicated the formation of single-phase monoclinic structure and also confirmed that Fe ions successfully incorporated into CuO crystal lattice by occupying Cu ionic sites. Interestingly, the morphology was found to change considerably from nanoflowers to nano-rod and disk-shaped then to nanoparticles with the variation of Fe content. The optical band gap calculated using DRS was found to be 2.8 eV for pure CuO and increases up to 3.4 eV with increasing ‘Fe’ content. Photoluminescence measurements also confirm these results. The magnetic measurements indicated that the obtained nanostructures are found to be room temperature ferromagnetism (RTF) with an optimum value of saturation magnetization at 2.0 wt% of Fe-doped CuO, i.e. 1.2960×10-3 emu/g.

  2. CuO nanostructures: optical properties and morphology control by pyridinium-based ionic liquids.

    Science.gov (United States)

    Sabbaghan, Maryam; Shahvelayati, Ashraf Sadat; Madankar, Kamelia

    2015-01-25

    Copper oxide nanostructures have been synthesized by a simple reflux method in aqueous medium of pyridinium based ionic liquids. The structural and optical properties of CuO nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence spectroscopy (PL) and UV-visible. The morphologies of the nanostructures can be controlled by changing the amount of NaOH and ionic liquids. The results show that the use identical pyridinium based ionic liquids in ratio of 4:1 NaOH/Cu(OAc)2⋅H2O yield minor differences in morphology of CuO nanostructures. Different morphologies of CuO nanostructures were obtained by changing the ratio NaOH/Cu(OAc)2⋅H2O to 2:1. Ionic liquids play an important role on optical properties of CuO nanostructures. The results of optical measurements of the CuO nanostructures illustrate that band gaps are estimated to be 1.67-1.85 eV. PL patterns studies show that the ionic liquids can be effect on PL patterns of the samples. The reasons of these phenomena are discussed.

  3. Toxicity of CuO Nanoparticles to Structure and Metabolic Activity of Allium cepa Root Tips.

    Science.gov (United States)

    Deng, Fei; Wang, Shuling; Xin, Hua

    2016-11-01

    Roots of Allium cepa were exposed to six CuO NPs suspensions (0, 5, 10, 20, 40, 80 mg L(-1)) in this study. Results revealed that with the increase of CuO NPs concentration, the Cu content in roots increased significantly. Compared to control, onion roots treated with CuO NPs (except 5 mg L(-1) suspension) grew slowly after 24 h. The surface of the root cap and meristematic zone were obviously damaged. The apical meristem of roots treated by 10 mg L(-1) and above concentrations stopped division. The nucleus of meristematic cells deformed, and nucleoli number increased. The plasmolysis occurred, and the cell membrane and nuclear membrane fractured. With the increase of CuO NPs concentration, the MDA content increased, and the root activity decreased. When dealt with 80 mg L(-1) CuO NPs for 72 h, onion roots appeared to be corroded.

  4. Chemical Quenching of Positronium in CUO/Al2O3 Catalysts

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hong-Jun; LIU Zhe-Wen; CHEN Zhi-Quan; WANG Shao-Jie

    2011-01-01

    CuO/Al2O3 catalysts were prepared by mixing CuO and γ-Al2O3 nanopowders. Microstructure and chemical environment of the catalysts are characterized by positron annihilation spectroscopy. The positron annihilation lifetime measurements reveal two long lifetime components τ3 and τ4, which correspond to ortho-positronium (o-Ps) annihilating in microvoids and large pores, respectively. With increasing CuO content from 0 to 40 wt%, both τ4 and its intensity I4 show significant decrease, which indicates quenching effect of o-Ps. The para-positronium (p-Ps) intensities derived from multi-Gaussian fitting of the coincidence Doppler broadening spectra also decreases gradually with increasing CuO content. This excludes the possibility of spin-conversion of positronium. Therefore, the chemical quenching by CuO is probably responsible for the decrease of o-Ps lifetime. Variation in the o-Ps annihilation rate λ4 (1/τ4) as a function of CuO content can be well fitted by a straight line, and the slope of the fitting Jine is (1.83 ± 0.05) × 107 s-1.

  5. Direct electrochemistry of hemoglobin immobilized in CuO nanowire bundles.

    Science.gov (United States)

    Li, Yueming; Zhang, Qian; Li, Jinghong

    2010-11-15

    It is one of main challenges to find the suitable materials to enhance the direct electron transfer between the electrode and redox protein for direct electrochemistry field. Nano-structured metal oxides have attracted considerable interest because of unique properties, well biocompatibility, and good stability. In this paper, the copper oxide nanowire bundles (CuO NWBs) were prepared via a template route, and the bioelectrochemical performances of hemoglobin (Hb) on the CuO NWBs modified glass carbon electrodes (denoted as Hb-CuO NWBs/GC) were studied. TEM and XRD were used to characterize the morphology and structure of the as synthesized CuO NWBs. Fourier transform-infrared spectroscopy (FT-IR) proved that Hb in the CuO NWBs matrix could retain its native secondary structure. A pair of well-defined and quasi-reversible redox peaks at approximately -0.325 V (vs. Ag/AgCl saturated KCl) were shown in the cyclic voltammogram curve for the Hb-CuO NWBs/GC electrode, which indicated the direct electrochemical behavior. The Hb-CuO NWBs/GC electrode also displayed a good electrocatalytic activity toward the reduction of hydrogen peroxide. These results indicate that the CuO NWBs are good substrates for immobilization of biomolecules and might be promising in the fields of (bio) electrochemical analysis. Copyright © 2010 Elsevier B.V. All rights reserved.

  6. Facile synthesis of Zn doped CuO hierarchical nanostructures: Structural, optical and antibacterial properties

    Energy Technology Data Exchange (ETDEWEB)

    Iqbal, Javed, E-mail: tariqjan84@gmail.com, E-mail: javed.suggau@iiu.edu.pk; Jan, Tariq, E-mail: tariqjan84@gmail.com, E-mail: javed.suggau@iiu.edu.pk; Ul-Hassan, Sibt; Umair Ali, M.; Abbas, Fazal [Laboratory of Nanoscience and Technology, Department of Physics, International Islamic University, H-10, Islamabad (Pakistan); Ahmed, Ishaq [Experimental Physics Labs, National Center for Physics, Islamabad (Pakistan); Mansoor, Qaisar; Ismail, Muhammad [Institute of Biomedical and Genetic Engineering (IBGE), Islamabad (Pakistan)

    2015-12-15

    Zn{sub x}Cu{sub 1−x}O (where x= 0, 0.01, 0.03, 0.05, 0.07 and 0.1 mol%) hierarchical nanostructures have been prepared via soft chemical route. X-ray diffraction (XRD) results of the synthesized samples reveal the monoclinic structure of CuO without any impurity related phases. The micro-structural parameters such as crystallite size and microstrain have been strongly influenced by Zn doping. Scanning electron microscope (SEM) analyses depict the formation of hierarchical nanostructures having average particle size in the range of 26-43 nm. The surface area of CuO nanostructures has been reduced systematically with the increase in Zn content which is linked with the variations in particle size. An obvious decrease in the optical band gap energy of the synthesized CuO hierarchical nanostructures has been observed with Zn doping which is assigned to the formation of shallow levels in the band gap of CuO and combined transition from oxygen 2p states to d sates of Cu and Zn ions. The bactericidal potency of the CuO hierarchical nanostructures have been found to be enhanced remarkably with Zn doping.

  7. X-ray transmission through nanostructured and microstructured CuO materials

    Energy Technology Data Exchange (ETDEWEB)

    Botelho, M.Z. [Area de Ciencias Tecnologicas, Centro Universitario Franciscano, Rua dos Andradas, 1614, CEP 97010-032 Santa Maria, RS (Brazil); Kuenzel, R., E-mail: roselikunzel@gmail.co [Universidade de Sao Paulo, Instituto de Fisica, Departamento de Fisica Nuclear, Cidade Universitaria, CEP 05508-090 Sao Paulo, SP (Brazil); Okuno, E. [Universidade de Sao Paulo, Instituto de Fisica, Departamento de Fisica Nuclear, Cidade Universitaria, CEP 05508-090 Sao Paulo, SP (Brazil); Levenhagen, R.S. [Universidade Federal de Sao Paulo, Departamento de Ciencias Exatas e da Terra, Rua Arthur Ridel, 275, Jardim Eldorado, CEP 09941-510 Diadema, SP (Brazil); Basegio, T.; Bergmann, C.P. [Universidade Federal do Rio Grande do Sul, Escola de Engenharia, Departamento de Materiais, Avenida Osvaldo Aranha, 99, CEP 90035-190 Porto Alegre, RS (Brazil)

    2011-02-15

    This study presents a comparison of the X-ray transmission through microsized and nanosized materials. For this purpose CuO nanoparticles, with 13.4 nm average grain size, and CuO microparticles, with a mean particle size of 56{mu}m, were incorporated separately to beeswax in a concentration of 5%. Results show that the transmission through the above material plates with microsized and nanosized CuO was almost the same for X-ray beams generated at 60 and 102 kV tube voltages. However, for the radiation beams generated at 26 and 30 kV tube voltages the X-rays are more attenuated by the nanostructured CuO plates by a factor of at least 14%. Results suggest that the difference in the low energy range may be due to the higher number of particles/gram in the plates designed with CuO nanoparticles and due to the grain size effect on the X-ray transmission.

  8. Fine CuO anisotropic nanoparticles supported on mesoporous SBA-15 for selective hydrogenation of nitroaromatics.

    Science.gov (United States)

    Sareen, Shweta; Mutreja, Vishal; Singh, Satnam; Pal, Bonamali

    2016-01-01

    SBA-15 modified with APTMS (3-aminopropyl trimethoxysilane) having pore diameter (∼8 nm) has been synthesized and impregnated with 1-10 wt.% Cu using Cu(NO3)2 as a metal source followed by calcination at 350 °C. As-prepared CuO/ap-SBA-15 powder showed changes in the color from white for bare SBA-15 to light green due to formation of anisotropic CuO nanoparticles that exhibited a characteristic plasmon absorption band at 359 and 747 nm. TEM studies showed a change in the morphology of CuO NPs as a function of increased Cu loading. Moreover, well dispersed CuO nanospheres (∼5-6 nm) and nanorods (aspect ratio ∼11-20 nm) having monoclinic crystal phase were observed within the mesoporous channels of SBA-15. Elemental mapping studies confirmed uniform distribution of CuO nanoparticles on the surface of SBA-15. An increase in surface area was also observed from 694 m(2) g(-1) for SBA-15 to 762 m(2) g(-1) for 10 wt.% Cu loading probably due to the deposition of excess of CuO nanoparticles on the outer siliceous surface. The catalytic activity also increased with Cu loading and 10 wt.% CuO/ap-SBA-15 catalyst displayed the highest catalytic activity for the reduction of m-chloronitrobenzene and m-nitrotoluene with 83% and 100% selectivity for m-chloroaniline and m-aminotoluene respectively.

  9. Highly efficient photocatalytic activity of CuO quantum dot decorated rGO nanocomposites

    Science.gov (United States)

    Dutta, Shibsankar; Das, Kajari; Chakrabarti, Kaushik; Jana, D.; De, S. K.; De, Sukanta

    2016-08-01

    CuO quantum dots (QD) of size 4.5 nm decorated on a rGO sheet to form nanocomposites with different weight percentages via a simple soft chemical route was reported here. Tuning of CuO QD absorption towards the visible region from the UV region in the presence of rGO was also observed. The luminescence of rGO was found to be quenched in rGO-CuO nanocomposites due to charge transfer from the lowest unoccupied molecular orbital of the rGO layer to the conduction band of CuO. Systematic and concise studies of photocatalytic performance towards degradation of methylene blue (MB) dye by CuO QD along with rGO-CuO nanocomposites were presented in this work. A nanocomposite with an equal weight percentage of rGO and CuO degrades almost 99% of MB under irradiation of visible light for 50 min, showing maximum degradation efficiency.

  10. Translocation and biotransformation of CuO nanoparticles in rice (Oryza sativa L.) plants.

    Science.gov (United States)

    Peng, Cheng; Duan, Dechao; Xu, Chen; Chen, Yongsheng; Sun, Lijuan; Zhang, Hai; Yuan, Xiaofeng; Zheng, Lirong; Yang, Yuanqiang; Yang, Jianjun; Zhen, Xiangjun; Chen, Yingxu; Shi, Jiyan

    2015-02-01

    Metal-based nanoparticles (MNPs) may be translocated and biochemically modified in vivo, which may influence the fate of MNPs in the environment. Here, synchrotron-based techniques were used to investigate the behavior of CuO NPs in rice plants exposed to 100 mg/L CuO NPs for 14 days. Micro X-ray fluorescence (μ-XRF) and micro X-ray absorption near edge structure (μ-XANES) analysis revealed that CuO NPs moved into the root epidermis, exodermis, and cortex, and they ultimately reached the endodermis but could not easily pass the Casparian strip; however, the formation of lateral roots provided a potential pathway for MNPs to enter the stele. Moreover, bulk-XANES data showed that CuO NPs were transported from the roots to the leaves, and that Cu (II) combined with cysteine, citrate, and phosphate ligands and was even reduced to Cu (I). CuO NPs and Cu-citrate were observed in the root cells using soft X-ray scanning transmission microscopy (STXM).

  11. Hollow rhodoliths increase Svalbard's shelf biodiversity

    Science.gov (United States)

    Teichert, Sebastian

    2014-11-01

    Rhodoliths are coralline red algal assemblages that commonly occur in marine habitats from the tropics to polar latitudes. They form rigid structures of high-magnesium calcite and have a good fossil record. Here I show that rhodoliths are ecosystem engineers in a high Arctic environment that increase local biodiversity by providing habitat. Gouged by boring mussels, originally solid rhodoliths become hollow ecospheres intensely colonised by benthic organisms. In the examined shelf areas, biodiversity in rhodolith-bearing habitats is significantly greater than in habitats without rhodoliths and hollow rhodoliths yield a greater biodiversity than solid ones. This biodiversity, however, is threatened because hollow rhodoliths take a long time to form and are susceptible to global change and anthropogenic impacts such as trawl net fisheries that can destroy hollow rhodoliths. Rhodoliths and other forms of coralline red algae play a key role in a plurality of environments and need improved management and protection plans.

  12. optimizing compressive strength characteristics of hollow building ...

    African Journals Online (AJOL)

    eobe

    This paper evaluates the compressive strength of sandcrete hollow building blocks when its sand fraction is partially replaced ... defines sandcrete blocks as composite materials made .... industry as well as the economy of Nigeria, if there is no.

  13. BOX-DEATH HOLLOW ROADLESS AREA, UTAH.

    Science.gov (United States)

    Weir, Gordon W.; Lane, Michael

    1984-01-01

    Geologic mapping, geochemical sampling, and a search for prospects and mineralized rock in the Box-Death Hollow Roadless Area, Utah indicate that there is little promise for the occurrence of mineral or energy resources in the area. Additional exploratory drilling by industry seems warranted if wells elsewhere in the region find oil or gas in strata as yet untested in the Box-Death Hollow Roadless Area.

  14. Mode characteristics of hollow core Bragg fiber

    Institute of Scientific and Technical Information of China (English)

    Minning Ji; Zhidong Shi; Qiang Guo

    2005-01-01

    Analytical expression to calculate propagation constant and mode field of the hollow core Bragg fiber is derived. Numerical results are presented. It is shown that the fundamental mode of the hollow core Bragg fiber is circularly symmetric TE01 mode with no polarization degeneracy, while the higher order mode may be HE11, TM01, or TE02 etc.. This property is different from conventional optical fiber that its fundamental mode is the linearly polarized HE11 mode and is polarization degeneracy.

  15. Raman spectroscopy system with hollow fiber probes

    Science.gov (United States)

    Liu, Bing-hong; Shi, Yi-Wei

    2012-11-01

    A Raman remote spectroscopy system was realized using flexible hollow optical fiber as laser emittion and signal collection probes. A silver-coated hollow fiber has low-loss property and flat transmission characteristics in the visible wavelength regions. Compared with conventional silica optical fiber, little background fluorescence noise was observed with optical fiber as the probe, which would be of great advantages to the detection in low frequency Raman shift region. The complex filtering and focusing system was thus unnecessary. The Raman spectra of CaCO3 and PE were obtained by using the system and a reasonable signal to noise ratio was attained without any lens. Experiments with probes made of conventional silica optical fibers were also conducted for comparisons. Furthermore, a silver-coated hollow glass waveguide was used as sample cell to detect liquid phase sample. We used a 6 cm-long hollow fiber as the liquid cell and Butt-couplings with emitting and collecting fibers. Experiment results show that the system obtained high signal to noise ratio because of the longer optical length between sample and laser light. We also give the elementary theoretical analysis for the hollow fiber sample cell. The parameters of the fiber which would affect the system were discussed. Hollow fiber has shown to be a potential fiber probe or sample cell for Raman spectroscopy.

  16. Green synthesis of copper oxide (CuO) nanoparticles using banana peel extract and their photocatalytic activities

    Science.gov (United States)

    Aminuzzaman, Mohammod; Kei, Leong Mei; Liang, Wong Hong

    2017-04-01

    Copper oxide nanoparticles (CuO NPs) are interesting class of materials having multifunctional properties with promising applications in the areas of catalysts, gas sensors, batteries, magnetic storage media, solar energy, superconductors etc. Thus synthesis of CuO NPs has attracted tremendous interest to scientists and researchers Herein, we reported a green and simple method for biosynthesizing CuO NPs using banana peel extract as reducing and stabilizing agent. XRD, EDX, FE-SEM, FTIR have been used for characterization of biosynthesized CuO NPs. The results indicating that the CuO NPs synthesized by banana peel extract have high purity and the average particles size is 60 nm. The photocatalytic activity of the CuO NPs has been investigated by degradation of Congo red (CR) dye under solar irradiation. The extent of CR dye degradation by CuO NPs is monitored by using a UV-visible spectrophotometer. Due to the smaller size and high purity, the biosynthesized CuO NPs showed an excellent photocatlytic activity.

  17. Improved electrochemical performances of CuO nanotube array prepared via electrodeposition as anode for lithium ion battery

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, Anguo, E-mail: hixiaoanguo@126.com; Zhou, Shibiao; Zuo, Chenggang; Zhuan, Yongbing; Ding, Xiang

    2015-10-15

    Graphical abstract: CuO nanotube array electrodes prepared by electrodeposition method exhibit an excellent lithium ion storage ability as anode of Li-ion battery. - Highlights: • CuO nanotube arrays are synthesized by an electrodeposition method. • CuO nanotube shows a high-rate performance. • CuO nanotube shows an excellent cycling performance. - Abstract: We report a facile strategy to prepared CuO nanotube arrays directly grown on Cu plate through the electrodeposition method. The as-prepared CuO nanotubes show a quasi-cylinder nanostructure with internal diameters of ca. ∼100 nm, external diameters of ca. ∼120 nm, and average length of ∼3 μm. As an anode for lithium ion batteries, the electrochemical properties of the CuO nanotube arrays are investigated by cyclic voltammetry (CV) and galvanostatic charge/discharge tests. Due to the unique nanotube nanostructure, the as-prepared CuO electrodes exhibit good rate performance (550 mAh g{sup −1} at 0.1 C and 464 mAh g{sup −1} at 1 C) and cycling performance (581 mAh g{sup −1} at 0.1 C and 538 mAh g{sup −1} at 0.5 C)

  18. Inhibition of anaerobic wastewater treatment after long-term exposure to low levels of CuO nanoparticles.

    Science.gov (United States)

    Otero-González, Lila; Field, Jim A; Sierra-Alvarez, Reyes

    2014-07-01

    CuO nanoparticles (NPs) are released into wastewater due to the widespread use and generation as by-product in various applications (e.g. semiconductor manufacturing). However, information on the behavior and impact of CuO NPs on wastewater treatment processes is very limited. The objective of this study was to evaluate the fate and long-term effect of CuO NPs (average size = 37 nm) on high-rate anaerobic bioreactors. A laboratory-scale upflow anaerobic sludge blanket reactor was operated with a synthetic wastewater containing low concentrations of CuO NPs (1.4 mg Cu L(-1)) and a mixture of volatile fatty acids for 107 days. CuO NPs were largely removed during anaerobic treatment and on the average only 20-32% of the NPs fed to the reactor escaped with the effluent. Scanning electron microscopy and chemical analysis confirmed that CuO NPs were partitioned into the anaerobic sludge. While short-term exposure to CuO NPs (1.4 mg Cu L(-1)) only caused minor inhibition to methanogenesis, extended exposure caused severe toxicity and reduced the acetoclastic methanogenic activity by more than 85%. Moreover, the reactor performance was completely disrupted and the methane production decreased by more than 50%. The study is the first to demonstrate a significant long-term effect of low levels of CuO NPs on methanogenesis.

  19. Effect of CuO on the Formation Mechanism of Calcium Sulphoaluminate

    Institute of Scientific and Technical Information of China (English)

    MA Suhua; SHEN Xiaohong; HUANG Yeping; ZHONG Baiqian

    2008-01-01

    Calcium sulphoaluminate was prepared with chemical reagents in this paper.The formation mechanism of calcium sulphoaluminate and effect of CuO on the formation mechanism of calcium sulphoaluminate were investigated by the chemical analysis,X-ray diffraction(XRD),and differential scanning calorimetry(DSC).The results show that there are three ways in the formation of calcium sulphoaluminate.CuO can promote the decomposition of calcium carbonate and decrease the formation temperature of calcium sulphoaluminate(C4A3S).When the burning temperature is below 1000℃,the addition of CuO can promote the formation of calcium sulphoaluminate,while CuO can not favor the formation of calcium sulphoaluminate above 1000℃.

  20. Magnetodielectric effect in composites of nanodimensional glass and CuO nanoparticles

    Science.gov (United States)

    Ranjan Saha, Dhriti; Mukherjee, Manabendra; Chakravorty, Dipankar

    2012-11-01

    Nanocomposites comprising CuO particles of average diameter 21 nm coated with 5 nm silica glass containing iron ions were synthesized by a chemical route. An ion exchange reaction at the nanoglass/CuO interface produced iron-doped CuO with copper ion vacancies within the nanoparticles. Room temperature ferromagnetic-like behavior was observed in the nanocomposites. This was ascribed to uncompensated spins contributed by Fe ions with associated copper ion vacancies. A rather high value of magnetodielectric parameter in the range 16-26% depending on the measuring frequency was exhibited by these nanocomposites at a magnetic field of 10 KOe. This was caused by a magnetoresistance of 33% in the iron doped CuO nanoparticles. The experimental results were fitted to the Maxwell-Wagner Capacitor model developed by Catalan. These materials will be suited for magnetic sensor applications.

  1. Synthesis and Structural Study of Sr2CuO3+δ Superconductor under High Pressure

    Institute of Scientific and Technical Information of China (English)

    LIU Qing-Qing; WANG Fu-Ren; LI Feng-Ying; CHEN Liang-Chen; YU Ri-Cheng; JIN Chang-Qing; LI Yan-Chun; LIU Jing

    2008-01-01

    A single-phase Sr2CuO3+δ superconductor is synthesized under high temperature and high pressure, in which oxygen atoms only partially occupy the apical sites next to the CuO2 planes and act as hole-dopants. The superconducting transition temperature with Tcmax = 75 K is achieved in the material. Structure analysis from x-ray powder diffraction data show that this material crystallizes into a K2NiF4 structure with tetragonal unit cell of α = 3.795(3) (A) and c = 12.507(1) (A). Energy-dispersive synchrotron x-ray-diffraction studies at ambient are performed on powder samples of St2CuO3+δ in a diamond-anvil cell at pressure up to 35 GPa. Anisotropic compressibility is found. Pressure-induced isostructural phase transition might exist as revealed by the discontinuous change of crystal cell volume V with pressure.

  2. Electronic structure of CuO2 planes: From insulator to superconductor

    Science.gov (United States)

    Larosa, S.; Vobornik, I.; Zwick, F.; Berger, H.; Grioni, M.; Margaritondo, G.; Kelley, R. J.; Onellion, M.; Chubukov, A.

    1997-07-01

    Using angle-resolved photoemission and linearly polarized synchrotron radiation, we measured the electronic band structure of electronic states of CuO2 plane materials ranging from insulators (Sr2CuO2Cl2) to overdoped superconductors (Bi2Sr2CaCu2O8+x). We report three results: (i) The CuO2 containing insulator possesses a spin-density-wave (SDW) ground state; (ii) there are precursors of the SDW state for underdoped Bi2Sr2CaCu2O8+x; (iii) an extended saddle-point-type van Hove singularity is neither a necessary nor a sufficient condition for a high superconducting transition temperature, Tc.

  3. High performance HTPB-based energetic nanomaterial with CuO nanoparticles.

    Science.gov (United States)

    de la Fuente, José Luis; Mosquera, Gonzalo; París, Rodrigo

    2009-12-01

    This work describes the first example to demonstrate the enhancement of performances of composite highly energetic materials by mean of employing standard CuO nano-powder as burning rate catalyst in comparison to micro-fillers. The solid composite propellants with CuO microparticles are less stable due to oversensitivity to pressure variations, but the nano-structured composite propellant yields high stable burning rates over a broad pressure range. In addition, the incorporation of CuO nanoparticles in the formulations of these energetic materials also improves their combustion and thermal properties, according to the characterization obtained by differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA). These results indicate the excellent benefits found in using these nanoparticles as additive for solid rocket propulsion applications.

  4. Structure and magnetic properties of Mn-doped CuO solids

    Institute of Scientific and Technical Information of China (English)

    FAN Chong-fei; PAN Li-qing; ZHU Hao; QIU Hong-mei; WANG Feng-ping; WU Ping; QIU Hong; ZHANG Yue; J. Q. XIAO

    2005-01-01

    The CuO doped with 5%-20% Mn(molar fraction) solids were sintered from CuO and MnO2 powder at high temperature (1 273 K) for 8 h. X-ray diffraction was used to determine the solid crystallinity and to address the formation of secondary phases. It is found that it is difficult to achieve pure Cu1-xMnxO phase using standard solid phase reaction. However, sintering under a pressure of 27.7 MPa significantly reduces the undesirable second phase CuMn2O4, providing a route to achieve pure Cu1-xMnx O phase. SQUID magnetometry was employed to characterize the magnetic properties. Mn-doped CuO presents ferromagnetic characteristics below 70 K. Electrical transport properties were measured in a current-perpendicular-to-plane(CPP) geometry using the PPMS, which suggests variable-range hopping mechanism.

  5. Nonlinear optical properties of laser deposited CuO thin films

    Energy Technology Data Exchange (ETDEWEB)

    Chen Aiping [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); Yang Guang, E-mail: gyang@mail.hust.edu.c [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); Long Hua; Li Fang; Li Yuhua [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); Lu Peixiang, E-mail: lupeixiang@mail.hust.edu.c [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2009-06-01

    In this work we investigate the third-order optical nonlinearities in CuO films by Z-scan method using a femtosecond laser (800 nm, 50 fs, 200 Hz). Single-phase CuO thin films have been obtained using pulsed laser deposition technique. The structure properties, surface image, optical transmittance and reflectance of the films were characterized by X-ray diffraction, Raman spectroscopy, scanning electron microscopy and UV-vis spectroscopy. The Z-scan results show that laser-deposited CuO films exhibit large nonlinear refractive coefficient, n{sub 2} = - 3.96 x 10{sup -17} m{sup 2}/W, and nonlinear absorption coefficient, {beta} = - 1.69 x 10{sup -10} m/W, respectively.

  6. Growth and humidity sensing properties of plate-like CuO nanostructures

    Science.gov (United States)

    Bayansal, F.; Çetinkara, H. A.; Çankaya, G.

    2014-03-01

    This paper describes a simple, low-temperature and cost-effective liquid-phase method to synthesize homogenous plate-like CuO nanostructures and their sensitivity to humidity. Scanning electron microscopy illustrated that the synthesized CuO nanoplates have thicknesses of ~100 nm. X-ray diffraction measurements showed that the CuO nanostructures have high crystallinity with monoclinic crystal structure preferentially in ? and ? directions. From the temperature-dependant dark electrical resistivity measurements, the ionization energies of the impurity levels and thermal band gap energies of the films are found as 0.30, 0.32 and 1.37, 1.39 for as-synthesized and annealed films, respectively. Gas sensing characteristics of the films were investigated for different concentrations of humidity, isopropyl alcohol, methanol, ethanol, chloroform and acetone vapours. It was found that the sensor is sensitive to humidity but not to the other volatile organic compounds.

  7. Organometallic Synthesis of CuO Nanoparticles: Application in Low-Temperature CO Detection.

    Science.gov (United States)

    Jońca, Justyna; Ryzhikov, Andrey; Palussière, Ségolène; Esvan, Jérome; Fajerwerg, Katia; Menini, Philippe; Kahn, Myrtil L; Fau, Pierre

    2017-08-24

    A metal-organic approach has been employed for the preparation of anisotropic CuO nanoparticles. These nanostructures have been characterized by transmission and high resolution transmission electron microscopy, field-emission scanning electron microscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The CuO nanoparticles have been deposited as gas-sensitive layers on miniaturized silicon devices. At an operating temperature of 210 °C, the sensors present an optimum response toward carbon monoxide correlated with a fast response (Rn) and short recovery time. A high sensitivity to CO (Rn≈150 %, 100 ppm CO, RH 50 %) is achieved. These CuO nanoparticles serve as a very promising sensing layer for the fabrication of selective CO gas sensors working at a low temperature. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Morphology- and facet-controlled synthesis of CuO micro/nanomaterials and analysis of their lithium ion storage properties

    Science.gov (United States)

    Liu, Xiaodi; Liu, Guangyin; Wang, Lijuan; Li, Yinping; Ma, Yupei; Ma, Jianmin

    2016-04-01

    Hierarchical CuO architectures and monodisperse CuO nanoplates are synthesized via a hydrothermal method with the assistance of ionic liquid 1-butyl-3-methylimidazolium chloride ([Bmim]Cl). The products are characterized by XRD, SEM, TEM, HRTEM, BET, and XPS, and the results indicate that the CuO architectures are composed of nanosheets with exposed (001) facets and the CuO nanoplates are single crystals enclosed by (200) facets. More specially, it is found that [Bmim]Cl serves as an effective template for the synthesis of CuO nanoplates by adsorbing on the (200) planes of monoclinic CuO. When evaluated as anode materials for lithium-ion batteries, CuO architectures possess higher discharge capacity, better cycling stability, and better rate capability than CuO nanoplates. The initial discharge capacity of CuO architectures is 1096 mAh g-1 at a rate of 0.5 C, whereas CuO nanoplates exhibit a lower capacity of 878.4 mAh g-1. Moreover, after 50 cycles, CuO architectures and CuO nanoplates can deliver discharge capacities of 465.6 and 281.6 mAh g-1, respectively.

  9. Low temperature synthesis of seed mediated CuO bundle of nanowires, their structural characterisation and cholesterol detection

    Energy Technology Data Exchange (ETDEWEB)

    Ibupoto, Z.H., E-mail: zafar.hussin.ibupoto@liu.se [Department of Science and Technology, Linköping University, Campus Norrköping, SE-60174 Norrköping (Sweden); Khun, K. [Department of Science and Technology, Linköping University, Campus Norrköping, SE-60174 Norrköping (Sweden); Liu, X. [Department of Physics, Chemistry, and Biology (IFM), Linköping University, 58183 Linköping Sweden (Sweden); Willander, M. [Department of Science and Technology, Linköping University, Campus Norrköping, SE-60174 Norrköping (Sweden)

    2013-10-15

    In this study, we have successfully synthesised CuO bundle of nanowires using simple, cheap and low temperature hydrothermal growth method. The growth parameters such as precursor concentration and time for duration of growth were optimised. The field emission scanning electron microscopy (FESEM) has demonstrated that the CuO bundles of nanowires are highly dense, uniform and perpendicularly oriented to the substrate. The high resolution transmission electron microscopy (HRTEM) has demonstrated that the CuO nanostructures consist of bundle of nanowires and their growth pattern is along the [010] direction. The X-ray diffraction (XRD) technique described that CuO bundle of nanowires possess the monoclinic crystal phase. The surface and chemical composition analyses were carried out with X-ray photoelectron spectroscopy (XPS) technique and the obtained results suggested the pure crystal state of CuO nanostructures. In addition, the CuO nanowires were used for the cholesterol sensing application by immobilising the cholesterol oxidase through electrostatic attraction. The infrared reflection absorption spectroscopy study has also revealed that CuO nanostructures are consisting of only Cu-O bonding and has also shown the possible interaction of cholesterol oxidase with the sharp edge surface of CuO bundle of nanowires. The proposed cholesterol sensor has demonstrated the wide range of detection of cholesterol with good sensitivity of 33.88 ± 0.96 mV/decade. Moreover, the CuO bundle of nanowires based sensor electrode has revealed good repeatability, reproducibility, stability, selectivity and a fast response time of less than 10 s. The cholesterol sensor based on the immobilised cholesterol oxidase has good potential applicability for the determination of cholesterol from the human serum and other biological samples. - Highlights: • This study describes the synthesis of bundle of CuO nanowires by hydrothermal method. • CuO nanostructures exhibit good alignment and

  10. Enhanced stability and dissolution of CuO nanoparticles by extracellular polymeric substances in aqueous environment

    Energy Technology Data Exchange (ETDEWEB)

    Miao, Lingzhan; Wang, Chao; Hou, Jun, E-mail: hhuhjyhj@126.com; Wang, Peifang; Ao, Yanhui; Li, Yi; Lv, Bowen; Yang, Yangyang; You, Guoxiang; Xu, Yi [Hohai University, Key Laboratory of Integrated Regulation and Resources Development on Shallow Lakes, Ministry of Education (China)

    2015-10-15

    Stability of engineered nanoparticles in aquatic environment is an essential parameter to evaluate their fate, bioavailability, and potential toxic effects toward living organisms. As CuO NPs enter the wastewater systems, they will encounter extracellular polymeric substances (EPS) from microbial community before directly interacting with bacterial cells. EPS may play an important role in affecting the stability and the toxicity of CuO NPs in aquatic environment. In this study, the influences of flocculent sludge-derived EPS, as well as model protein (BSA) and natural polysaccharides (alginate) on the dissolution kinetics and colloidal stability of CuO NPs were investigated. Results showed that the presence of NOMs strongly suppressed CuO NPs aggregation, confirmed by DLS, zeta potentials, and TEM analysis. The enhanced stability of CuO NPs in the presence of EPS and alginate were attributed to the electrostatic combined with steric repulsion, while the steric-hindrance effect may be the predominant mechanism retarding nano-CuO aggregation for BSA. Higher degrees of copper release were achieved with the increasing concentrations of NOMs. EPS are more effective than alginate and BSA in releasing copper, probably due to the abundant functional groups and the excellent metal-binding capacity. The ratio of free-Cu{sup 2+}/total dissolved Cu significantly decreased in the presence of EPS, indicating that EPS may affect the speciation and Cu bioavailability in aqueous environment. These results may be important for assessing the fate and transport behaviors of CuO NPs in the environment as well as for setting up usage regulation and treatment strategy.

  11. Local and CMOS-compatible synthesis of CuO nanowires on a suspended microheater on a silicon substrate.

    Science.gov (United States)

    Zhang, Kaili; Yang, Yang; Pun, E Y B; Shen, Ruiqi

    2010-06-11

    This paper presents the synthesis of CuO nanowires using a localized thermal heating method in ambient air. It employs local heat sources defined in micro-resistive heaters fabricated by a standard polysilicon-based surface micromachining process instead of a global furnace heating. Since the synthesis is performed globally at room temperature, the presented process is compatible with standard CMOS. The synthesized CuO nanowires are characterized by scanning electron microscopy, transmission electron microscopy and high resolution transmission electron microscopy. It is found that this approach provides a simple method to locally synthesize suspended CuO nanowires on polysilicon microbridges on silicon substrates, thus allowing for integration of CuO nanowires into silicon-based devices. It provides a significant step towards the process integration of CuO nanowires with MEMS to realize functional devices.

  12. Facile synthesis of Fe-incorporated CuO nanoarrays with enhanced electrochemical performance for lithium ion full batteries

    Energy Technology Data Exchange (ETDEWEB)

    Heng, Bojun [Institute of Nano-science and Technology, Central-China Normal University, Wuhan, 430079 (China); Department of Applied Physics, Wuhan University of Science and Technology, Wuhan, 430065 (China); Qing, Chen; Wang, Hai; Sun, Daming; Wang, Bixiao [Institute of Nano-science and Technology, Central-China Normal University, Wuhan, 430079 (China); Tang, Yiwen, E-mail: ywtang@phy.ccnu.edu.cn [Institute of Nano-science and Technology, Central-China Normal University, Wuhan, 430079 (China)

    2015-11-15

    CuO nanoarrays (CNAs) and Fe-incorporated CuO nanoarrays (FCNAs) were fabricated by hydrothermal method. Addition of Fe salt to the reaction mixture allowed the introduction of iron oxide onto the CNAs surface, which was characterized by XPS and HRTEM. Introducing Fe ion into reaction precursor significantly affected not only the morphologies of as-prepared products but also their electrochemical performance as anode for lithium ion full battery. The FCNAs electrodes showed higher specific capacity and better capacity retention at different current densities than that of CNAs. - Highlights: • Fe-incorporated CuO nanoarrays were fabricated by hydrothermal method. • Fe salt in reaction mixture leads to iron oxides forming on the surface of CuO. • Fe-incorporating improves the lithium ion battery performance of CuO anodes.

  13. Cumene Liquid Oxidation to Cumene Hydroperoxide over CuO Nanoparticle with Molecular Oxygen under Mild Condition

    Institute of Scientific and Technical Information of China (English)

    Meiying Zhang; Lefu Wang; Hongbing Ji; Bing Wu; Xiaoping Zeng

    2007-01-01

    CuO nanoparticle was synthesized via wet chemical method and was characterized by X-ray diffraction (XRD), nitrogen adsorption-desorption, and scanning electron microscopy (SEM). Catalytic oxidation of cumene with molecular oxygen was studied over CuO nanoparticle. The catalysts showed markedly higher activities as compared to CuO prepared by conventional method, CUO/AI2O3, or homogeneous copper catalyst under comparable reaction conditions. The cumene conversion, cumene hydroperoxide (CHP) yield, and selectivity using 0.25 g CuO nanoparticle catalyst and 0.1 mol cumene at 358 K for 7 h were 44.2%, 41.2% and 93.2%, respectively. The catalyst can be recycled. After 6 recycled experiments, no loss of catalytic activity was observed.

  14. Multi-functional CuO nanowire/TiO2 nanotube arrays photoelectrode synthesis, characterization, photocatalysis and SERS applications.

    Science.gov (United States)

    Sheng, Pengtao; Li, Weili; Du, Pengwei; Cao, Kesheng; Cai, Qingyun

    2016-11-01

    Vertically aligned single crystalline CuO nanowire arrays (NWs) grown directly on TiO2 nanotube arrays (NTAs) supporting by Ti foil have been successfully fabricated using facile thermal oxidation of Cu nanocrystals in static air. CuO NWs growth behavior dependent on parent Cu nanocrystals sizes has been well investigated. Mass transport channel of Cu ions in horizontal and vertical for supporting CuO NWs diameter and length changes has been confirmed through a novel step-by-step surface diffusion process. CuO NWs, nano-mushrooms and nanosheets can be easily obtained by varying growth conditions. After photocatalytic synthesis of snow-like Ag nanocrystals upon CuO NWs/TiO2 NTAs, the hybrid photoelectrode exhibits superior catalytic property and detection sensitivity, which can clean themselves by photocatalytic degradation of RhB molecules adsorbed to the substrate under irradiation using surface enhanced Raman scattering (SERS) detection, a recycling can been achieved.

  15. CHARACTERISATION OF Cr DOPED CuO NANOPARTICLES AND ITS PERFORMANCE IN SOLAR CELL

    OpenAIRE

    2016-01-01

    Pure and Cr2+doped Copper oxide (CuO) nanoparticles were synthesized by simple precipitation method and subjected to photovoltaic activity by forming nanopowder –thin film as light absorbing  layer  on an  indigenously fabricated heterojunction by Doctor-Blade method.  Effect of concentration of the dopant (2, 4, and 6 mol%)  on the properties of CuO was analyzed from X-Ray Diffraction pattern (XRD), Scanning Electron Microscopy(SEM) Energy Dispersive Analysis (EDAX), UV-Vis studies and Photo...

  16. Archetypal sandwich-structured CuO for high performance non-enzymatic sensing of glucose.

    Science.gov (United States)

    Meher, Sumanta Kumar; Rao, G Ranga

    2013-03-07

    In the quest to enhance the selectivity and sensitivity of novel structured metal oxides for electrochemical non-enzymatic sensing of glucose, we report here a green synthesis of unique sandwich-structured CuO on a large scale under microwave mediated homogeneous precipitation conditions. The physicochemical studies carried out by XRD and BET methods show that the monoclinic CuO formed via thermal decomposition of Cu(2)(OH)(2)CO(3) possesses monomodal channel-type pores with largely improved surface area (~43 m(2) g(-1)) and pore volume (0.163 cm(3) g(-1)). The fascinating surface morphology and pore structure of CuO is formulated due to homogeneous crystallization and microwave induced self assembly during synthesis. The cyclic voltammetry and chronoamperometry studies show diffusion controlled glucose oxidation at ~0.6 V (vs. Ag/AgCl) with extremely high sensitivity of 5342.8 μA mM(-1) cm(-2) and respective detection limit and response time of ~1 μM and ~0.7 s, under a wide dynamic concentration range of glucose. The chronoamperometry measurements demonstrate that the sensitivity of CuO to glucose is unaffected by the absence of dissolved oxygen and presence of poisoning chloride ions in the reaction medium, which essentially implies high poison resistance activity of the sandwich-structured CuO. The sandwich-structured CuO also shows insignificant interference/significant selectivity to glucose, even in the presence of high concentrations of other sugars as well as reducing species. In addition, the sandwich-structured CuO shows excellent reproducibility (relative standard deviation of ~2.4% over ten identically fabricated electrodes) and outstanding long term stability (only ~1.3% loss in sensitivity over a period of one month) during non-enzymatic electrochemical sensing of glucose. The unique microstructure and suitable channel-type pore architecture provide structural stability and maximum accessible electroactive surface for unimpeded mobility of glucose

  17. Outcome of temperature variation on sol-gel prepared CuO nanostructure properties (optical and dielectric)

    Energy Technology Data Exchange (ETDEWEB)

    Bibi, Maryam [Nano Synthesis Laboratory, Department of Physics, National University of Sciences and Technology, Islamabad (Pakistan); Javed, Qurat-ul-Ain, E-mail: quratulain@sns.nust.edu.pk [Nano Synthesis Laboratory, Department of Physics, National University of Sciences and Technology, Islamabad (Pakistan); Abbas, Hussain [Institute of Avionics & Aeronautics (IAA), Air University, Islamabad (Pakistan); Baqi, Sabah [Nano Synthesis Laboratory, Department of Physics, National University of Sciences and Technology, Islamabad (Pakistan)

    2017-05-01

    The optical and dielectric properties of Copper Oxide (CuO) have made it a fascinating material to be used in solar energy harvesting, gas sensing, optoelectronics and catalytical applications. Focusing on the cost-effectiveness of Sol-gel method, it is employed for nanostructured CuO production. Effect of changing temperature is observed on the formation mechanism of CuO and its properties. The temperature range of 300 °C–500 °C was used in annealing of samples to produce defect free CuO nanomaterial. Prepared material was investigated using phase characterization (X-ray diffraction ‘XRD’) technique, scanning electron microscopy (SEM), UV–Visible absorption spectroscopy and LCR meter. A structural change in prepared CuO was observed from cluster formation to Nano-fibrils by increase in annealing temperature. 11.99 nm–29.17 nm crystallites of CuO were attained by using Debye Scherer formula. A large band gap of 3.15 eV was achieved by increasing the annealing temperature upto 400 °C. For better solar energy harvest, wide band gapped CuO structures are proved to be functional and practical materials. The fabricated CuO nanostructures were found suitable to be used in devices for stabilizing circuit designs for sensitive appliances as well as micro electromechanical systems (mems). - Highlights: • CuO was synthesized by using sol gel method post growth annealing process. • XRD and SEM characterizations confirm the successful synthesis of CuO. • Change in morphology was observed with varying annealing temperature. • Improved optical and dielectric properties were observed.

  18. Chamomile flower extract-directed CuO nanoparticle formation for its antioxidant and DNA cleavage properties

    Energy Technology Data Exchange (ETDEWEB)

    Duman, Fatih, E-mail: fduman@erciyes.edu.tr [Erciyes University, Science Faculty, Biology Department, Kayseri 38039, Kayseri (Turkey); Ocsoy, Ismail [Department of Analytical Chemistry, Faculty of Pharmacy, Erciyes University, 38039, Kayseri (Turkey); Erciyes University, Nanotechnology Research Center, 38039, Kayseri (Turkey); Kup, Fatma Ozturk [Erciyes University, Science Faculty, Biology Department, Kayseri 38039, Kayseri (Turkey)

    2016-03-01

    In this study, we report the synthesis of copper oxide nanoparticles (CuO NPs) using a medicinal plant (Matricaria chamomilla) flower extract as both reducing and capping agent and investigate their antioxidant activity and interaction with plasmid DNA (pBR322).The CuO NPs were characterized using Uv–Vis spectroscopy, FT-IR (Fourier transform infrared spectroscopy), DLS (dynamic light scattering), XRD (X-ray diffraction), EDX (energy-dispersive X-ray) spectroscopy and SEM (scanning electron microscopy). The CuO NPs exhibited nearly mono-distributed and spherical shapes with diameters of 140 nm size. UV–Vis absorption spectrum of CuO NPs gave a broad peak around 285 and 320 nm. The existence of functional groups on the surface of CuO NPs was characterized with FT-IR analysis. XRD pattern showed that the NPs are in the form of a face-centered cubic crystal. Zeta potential value was measured as − 20 mV due to the presence of negatively charged functional groups in plant extract. Additionally, we demonstrated concentration-dependent antioxidant activity of CuO NPs and their interaction with plasmid DNA. We assumed that the CuO NPs both cleave and break DNA double helix structure. - Highlights: • The synthesis of microwave assisted green synthesis of CuO nanoparticles • The synthesized nanoparticles were analyzed by FT-IR, DLS, XRD, EDX and SEM. • Concentration-dependent antioxidant activity of CuO NPs was determined. • CuO NPs cause both cleavage in the DNA double helix structure and breaks as well.

  19. Hollow glass for insulating layers

    Science.gov (United States)

    Merticaru, Andreea R.; Moagar-Poladian, Gabriel

    1999-03-01

    Common porous materials, some of which will be considered in the chapters of this book, include concrete, paper, ceramics, clays, porous semiconductors, chromotography materials, and natural materials like coral, bone, sponges, rocks and shells. Porous materials can also be reactive, such as in charcoal gasification, acid rock dissolution, catalyst deactivation and concrete. This study continues the investigations about the properties of, so-called, hollow glass. In this paper is presented a computer simulation approach in which the thermo-mechanical behavior of a 3D microstructure is directly computed. In this paper a computer modeling approach of porous glass is presented. One way to test the accuracy of the reconstructed microstructures is to computed their physical properties and compare to experimental measurement on equivalent systems. In this view, we imagine a new type of porous type of glass designed as buffer layer in multilayered printed boards in ICs. Our glass is a variable material with a variable pore size and surface area. The porosity could be tailored early from the deposition phases that permitting us to keep in a reasonable balance the dielectric constant and thermal conductivity.

  20. Preparation of hollow spherical carbon nanocages

    Energy Technology Data Exchange (ETDEWEB)

    Tsai, C.-K.; Kang, H. Y.; Hong, C.-I; Huang, C.-H.; Chang, F.-C.; Wang, H. Paul, E-mail: wanghp@mail.ncku.edu.tw [National Cheng Kung University, Department of Environmental Engineering, Taiwan (China)

    2012-12-15

    This study presents a new and simple method for the synthesis of hollow carbon spheres possessing nanocage sizes of 7.1, 14, and 20 nm in diameter. The core-shell (i.e., Cu-C) nanoparticles prepared by carbonization of the Cu{sup 2+}-cyclodextrin (CD) complexes at 573 K for 2 h was etched with HCl (6N) to yield the hollow carbon spheres. The carbon-shell of the hollow carbon nanospheres, which consisted of mainly diamond-like and graphite carbons, is not perturbed during etching. In addition to the nanocages, the hollow carbon nanospheres also possess micropores with an opening of 0.45 nm, allowing small molecules to diffuse in and out through the carbon-shell. Many elements (such as Zn{sup 2+} or Cu{sup 2+}) can therefore be filled into the nanocages of the hollow carbon nanospheres. With these unique properties, for instance, designable active species such as Cu and ZnO encapsulated in the carbon-shell can act as Cu-ZnO-C yolk-shell nanoreactors which are found very effective in the catalytic decomposition of methanol.

  1. Method for the production of fabricated hollow microspheroids

    Energy Technology Data Exchange (ETDEWEB)

    Wickramanayake, Shan; Luebke, David R.

    2015-06-09

    The method relates to the fabrication of a polymer microspheres comprised of an asymmetric layer surrounding a hollow interior. The fabricated hollow microsphere is generated from a nascent hollow microsphere comprised of an inner core of core fluid surrounded by a dope layer of polymer dope, where the thickness of the dope layer is at least 10% and less than 50% of the diameter of the inner core. The nascent hollow microsphere is exposed to a gaseous environment, generating a vitrified hollow microsphere, which is subsequently immersed in a coagulation bath. Solvent exchange produces a fabricated hollow microsphere comprised of a densified outer skin surrounding a macroporous inner layer, which surrounds a hollow interior. In an embodiment, the polymer is a polyimide or a polyamide-imide, and the non-solvent in the core fluid and the coagulation bath is water. The fabricated hollow microspheres are particularly suited as solvent supports for gas separation processes.

  2. Comparison of stripe modulations in La1.875Ba0.125CuO4 and La1.48Nd0.4Sr0.12CuO4

    Science.gov (United States)

    Wilkins, S. B.; Dean, M. P. M.; Fink, Jörg; Hücker, Markus; Geck, J.; Soltwisch, V.; Schierle, E.; Weschke, E.; Gu, G.; Uchida, S.; Ichikawa, N.; Tranquada, J. M.; Hill, J. P.

    2011-11-01

    We report combined soft and hard x-ray scattering studies of the electronic and lattice modulations associated with stripe order in La1.875Ba0.125CuO4 and La1.48Nd0.4Sr0.12CuO4. We find that the amplitude of both the electronic modulation of the hole density and the strain modulation of the lattice is significantly larger in La1.875Ba0.125CuO4 than in La1.48Nd0.4Sr0.12CuO4 and is also better correlated. The in-plane correlation lengths are isotropic in each case; for La1.875Ba0.125CuO4, ξhole=255±5 Å, whereas for La1.48Nd0.4Sr0.12CuO4, ξhole=111±7 Å. We find that the modulations are temperature independent in La1.875Ba0.125CuO4 in the low temperature tetragonal phase. In contrast, in La1.48Nd0.4Sr0.12CuO4, the amplitude grows smoothly from zero, beginning 13 K below the LTT phase transition. We speculate that the reduced average tilt angle in La1.875Ba0.125CuO4 results in reduced charge localization and incoherent pinning, leading to the longer correlation length and enhanced periodic modulation amplitude.

  3. Synthesis of High-Density Poinsettia-Like Microstructure of CuO by the Hydrothermal Method and Its Ethanol Sensing Properties

    Science.gov (United States)

    Hien, Vu Xuan; Minh, Vu Duy; Phuoc, Luong Huu; Vuong, Dang Duc; Heo, Young-Woo; Chien, Nguyen Duc

    2017-06-01

    Highly uniform and dense poinsettia-like microstructures of CuO were synthesized by a facile hydrothermal method. The effect of the treatment time on the growth of the CuO microstructures was investigated. The CuO microflowers with diameters in the range 3-5 μm were composed of many interconnected nanoleaves (1-2 μm in diameter and 20-30 nm in thickness). A plausible growth mechanism for the formation of the CuO microstructures has been proposed and discussed. In addition, the ethanol sensing properties of the CuO microflowers were characterized at 150-350°C. The poinsettia-like microstructures of CuO exhibited better response to ethanol when compared to the sensing properties of the CuO nanoleaves. The sensing mechanism based on the models of carrier transport and leaf-to-leaf contact has been proposed and discussed.

  4. In-plane optical response of $Bi_{2}Sr_{2}CuO_{6}$

    NARCIS (Netherlands)

    Tsvetkov, A. A.; Schützmann, J.; Marel, D. van der

    1997-01-01

    Published in: Phys. Rev. B 55 (1997) 14152 Citing articles (CrossRef) citations recorded in [Science Citation Index] Abstract: We report on infrared reflectivity measurements of the $ab$-plane response of superconducting Bi$_2$Sr$_2$CuO$_6$ single crystals. The frequency dependent conductivity has a

  5. Solution-processable carboxylate-capped CuO nanoparticles obtained by a simple solventless method

    Energy Technology Data Exchange (ETDEWEB)

    Estruga, Marc [Universitat Autonoma de Barcelona, Department of Chemistry (Spain); Roig, Anna; Domingo, Concepcion [CSIC, Institut de Ciencia de Materials de Barcelona (Spain); Ayllon, Jose A., E-mail: joseantonio.ayllon@uab.es [Universitat Autonoma de Barcelona, Department of Chemistry (Spain)

    2012-08-15

    Carboxylate-capped CuO nanoparticles were obtained via a simple solventless route, based on the thermal decomposition at 120 Degree-Sign C of solid precursors. The reaction mixture consisted of copper acetate monohydrate, acting as the CuO precursor, and different organic carboxylic acids (lauric, phenylvaleric or 3,6,9-trioxadecanoic acid) used as the capping agent. The proposed method, in good agreement with environmentally friendly practices, produced dry nanoparticles, thereby totally eliminating the need of washing, filtration, or other downstream steps. Transmission electron micrographs show crystalline roughly spherical CuO nanoparticles with average diameters between 3.1 and 5.5 nm depending on the capping ligand. The laurate-capped CuO nanoparticles showed a paramagnetic behaviour at room temperature, while a weak ferromagnetic component was detected at low temperature (<40 K). It was also proved that the chemical structure of the carboxylic acid tail enabled the straightforward dispersibility of nanoparticles in common solvents and assisted in the deposition of the material as thin films.

  6. Effect of triethanolamine:ethylenediamine ratios on CuO nanoparticles prepared by ultrasound irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Ayob, M. T. M.; Ahmad, A. F.; Mohd, H. M. K.; Rahman, I. Abdul; Radiman, S. [School of Applied Physics, Faculty of Science and Technology (FST), Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor Darul Ehsan (Malaysia)

    2014-09-03

    Coral-spherical-shaped of copper oxide nanoparticles have been successfully synthesized with different ratios of triethanolamine:ethylenediamine surfactant under ultrasonic condition. By controlling the amplitude of the ultrasonic radiation and concentration of metal salt precursors and surfactant, the formation of CuO nanospheres was obtained. Energy dispersive X-ray spectrum confirmed that Cu and O are the only elementary components present with a ratio of approximately 1:1. Furthermore, X-ray powder diffraction spectra for all the examined ratios of CuO showed well crystalline structures. UV-Vis spectroscopy was utilized to estimate the band gap energies of the CuO nanoparticles produced, which were found to be in the range of 2.74 eV to 2.95 eV. The field emission scanning electron micrographs of these nanospheres showed that their dimensions were in the range of 5-30 nm. These results indicate that the triethanolamine:ethylenediamine ratio plays an important role in the formation of different sized CuO nanoparticles, displaying a decrement in particle size with the increment in amount of triethanolamine ratios. This might be the key to synthesizing nanoparticles with specific sizes for various applications.

  7. Salts affect the interaction of ZnO or CuO nanoparticles with wheat.

    Science.gov (United States)

    Stewart, Jacob; Hansen, Trevor; McLean, Joan E; McManus, Paul; Das, Siddhartha; Britt, David W; Anderson, Anne J; Dimkpa, Christian O

    2015-09-01

    Exposure to nanoparticles (NPs) that release metals with potential phytotoxicity could pose problems in agriculture. The authors of the present study used growth in a model growth matrix, sand, to examine the influence of 5 mmol/kg of Na, K, or Ca (added as Cl salts) and root exudates on transformation and changes to the bioactivity of copper(II) oxide (CuO) and zinc oxide (ZnO) NPs on wheat. These salt levels are found in saline agricultural soils. After 14 d of seedling growth, particles with crystallinity typical of CuO or ZnO remained in the aqueous fraction from the sand; particles had negative surface charges that differed with NP type and salt, but salt did not alter particle agglomeration. Reduction in shoot and root elongation and lateral root induction by ZnO NPs were mitigated by all salts. However, whereas Na and K promoted Zn loading into shoots, Ca reduced loading, suggesting that competition with Zn ions for uptake occurred. With CuO NPs, plant growth and loading was modified equally by all salts, consistent with major interaction with the plant with CuO rather than Cu ions. Thus, for both NPs, loading into plant tissues was not solely dependent on ion solubility. These findings indicated that salts in agricultural soils could modify the phytotoxicity of NPs.

  8. Spin Dynamics of $La_{2}CuO_{4}$ and the Two-Dimensional Heisenberg Model

    CERN Document Server

    Sandvik, A W; Barbara, U C S; Barbara, UC Santa

    1994-01-01

    The spin-lattice relaxation rate $1/T_1$ and the spin echo decay rate $1/T_{2G}$ for the 2D Heisenberg model are calculated using quantum Monte Carlo and maximum entropy analytic continuation. The results are compared to recent experiments on La$_2$CuO$_4$, as well as predictions based on the non-linear $\\sigma$-model.

  9. Room temperature ferromagnetism in Fe-doped CuO nanoparticles.

    Science.gov (United States)

    Layek, Samar; Verma, H C

    2013-03-01

    The pure and Fe-doped CuO nanoparticles of the series Cu(1-x)Fe(x)O (x = 0.00, 0.02, 0.04, 0.06 and 0.08) were successfully prepared by a simple low temperature sol-gel method using metal nitrates and citric acid. Rietveld refinement of the X-ray diffraction data showed that all the samples were single phase crystallized in monoclinic structure of space group C2/c with average crystallite size of about 25 nm and unit cell volume decreases with increasing iron doping concentration. TEM micrograph showed nearly spherical shaped agglomerated particles of 4% Fe-doped CuO with average diameter 26 nm. Pure CuO showed weak ferromagnetic behavior at room temperature with coercive field of 67 Oe. The ferromagnetic properties were greatly enhanced with Fe-doping in the CuO matrix. All the doped samples showed ferromagnetism at room temperature with a noticeable coercive field. Saturation magnetization increases with increasing Fe-doping, becomes highest for 4% doping then decreases for further doping which confirms that the ferromagnetism in these nanoparticles are intrinsic and are not resulting from any impurity phases. The ZFC and FC branches of the temperature dependent magnetization (measured in the range of 10-350 K by SQUID magnetometer) look like typical ferromagnetic nanoparticles and indicates that the ferromagnetic Curie temperature is above 350 K.

  10. Magnetodielectric effect in composites of nanodimensional glass and CuO nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Ranjan Saha, Dhriti [MLS Professor' s Unit, Indian Association for the Cultivation of Science, 2A and 2B Raja S.C. Mullick Road, Kolkata- 700032 (India); Mukherjee, Manabendra [Surface Physics Division, Saha Institute of Nuclear Physics, 1/AF BidhanNagar, Kolkata- 700064, India. (India); Chakravorty, Dipankar, E-mail: mlsdc@iacs.res.in [MLS Professor' s Unit, Indian Association for the Cultivation of Science, 2A and 2B Raja S.C. Mullick Road, Kolkata- 700032 (India)

    2012-11-15

    Nanocomposites comprising CuO particles of average diameter 21 nm coated with 5 nm silica glass containing iron ions were synthesized by a chemical route. An ion exchange reaction at the nanoglass/CuO interface produced iron-doped CuO with copper ion vacancies within the nanoparticles. Room temperature ferromagnetic-like behavior was observed in the nanocomposites. This was ascribed to uncompensated spins contributed by Fe ions with associated copper ion vacancies. A rather high value of magnetodielectric parameter in the range 16-26% depending on the measuring frequency was exhibited by these nanocomposites at a magnetic field of 10 KOe. This was caused by a magnetoresistance of 33% in the iron doped CuO nanoparticles. The experimental results were fitted to the Maxwell-Wagner Capacitor model developed by Catalan. These materials will be suited for magnetic sensor applications. - Highlights: Black-Right-Pointing-Pointer Synthesis of nanocomposites comprising CuO nanoparticles and interfacial nanodimensional silica glass. Black-Right-Pointing-Pointer These exhibited ferromagnetic-like behavior at room temperature. Black-Right-Pointing-Pointer High value of magnetodielectric parameter was obtained in the range 16-26% depending on the measuring frequency. Black-Right-Pointing-Pointer The Maxwell-Wagner Capacitor model of Catalan was used satisfactorily to explain the results.

  11. Theory of phonon properties in doped and undoped CuO nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Bahoosh, S.G. [Institute of Physics, Martin-Luther-University, D-06099 Halle (Germany); Apostolov, A.T. [University of Architecture, Civil Engineering and Geodesy Faculty of Hydrotechnics, Department of Physics, 1, Hristo Smirnenski Blvd., 1046 Sofia (Bulgaria); Apostolova, I.N. [University of Forestry, Faculty of Forest Industry, 10, Kl. Ohridsky Blvd., 1756 Sofia (Bulgaria); Wesselinowa, J.M., E-mail: julia@phys.uni-sofia.bg [University of Sofia, Department of Physics, 5 J. Bouchier Blvd., 1164 Sofia (Bulgaria)

    2012-07-02

    We have studied the phonon properties of CuO nanoparticles and have shown the importance of the anharmonic spin–phonon interaction. The Raman peaks of CuO nanoparticles shift to lower frequency and become broader as the particle size decreases in comparison with those of bulk CuO crystals owing to size effects. By doping with different ions, in dependence of their radius compared to the host ionic radius the phonon energies ω could be reduced or enhanced. The phonon damping is always enhanced through the ion doping effects. -- Highlights: ► The phonon properties of CuO nanoparticles are studied using a miscroscopic model. ► The phonon energy decreases whereas the damping increases with decreasing of particle size. ► It is shown the importance of the anharmonic spin–phonon interaction. ► By doping with RE-ions the phonon energy is reduced, whereas with TM-ions it is enhanced. ► The phonon damping is always enhanced through the ion doping effects.

  12. Green synthesis of CuO nanoparticles using Cassia auriculata leaf ...

    African Journals Online (AJOL)

    Methods: CuO NPs were prepared by heating a mixture of 10 mL of 0.01 M CuSO4 ... Results: The gradual change in color of the reaction solution from brownish yellow to ... variety of applications, including in catalysts, gas .... that the surface charge and size distribution play .... in providing the funds and lab facilities for this.

  13. Growth of Horizontal Nanopillars of CuO on NiO/ITO Surfaces

    Directory of Open Access Journals (Sweden)

    Siddharth Joshi

    2014-01-01

    Full Text Available We have demonstrated hydrothermal synthesis of rectangular pillar-like CuO nanostructures at low temperature (~60°C by selective growth on top of NiO porous structures film deposited using chemical bath deposition method at room temperature using indium tin oxide (ITO coated glass plate as a substrate. The growth of CuO not only filled the NiO porous structures but also formed the big nanopillars/nanowalls on top of NiO surface. These nanopillars could have significant use in nanoelectronics devices or can also be used as p-type conducting wires. The present study is limited to the surface morphology studies of the thin nanostructured layers of NiO/CuO composite materials. Structural, morphological, and absorption measurement of the CuO/NiO heterojunction were studied using state-of-the-art techniques like X-ray diffraction (XRD, transmission electron microscopy (SEM, atomic force microscopy (AFM, and UV spectroscopy. The CuO nanopillars/nanowalls have the structure in order of (5 ± 1.0 μm × (2.0 ± 0.3 μm; this will help to provide efficient charge transport in between the different semiconducting layers. The energy band gap of NiO and CuO was also calculated based on UV measurements and discussed.

  14. CuO nanorods/graphene nanocomposites for high-performance lithium-ion battery anodes

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Qi; Zhao, Jun; Shan, Wanfei; Xia, Xinbei; Xing, Lili; Xue, Xinyu, E-mail: xuexinyu@mail.neu.edu.cn

    2014-03-25

    Highlights: • CuO/GNS nanocomposites are synthesized by a hydrothermal method. • CuO/GNSs as LIB anodes exhibit much higher cyclability and capacity than CuO nanostructures. • Such excellent performances can be attributed to the synergistic effect between CuO and GNSs. -- Abstract: CuO/graphene nanocomposites are synthesized by a hydrothermal method, and their application as anodes of lithium-ion batteries has been investigated. CuO nanorods are uniformly coating on the surface of graphene nanosheets. CuO/graphene nanocomposites exhibit high cyclability and capacity. After 50 cycles, the capacity can maintain at 692.5 mA h g{sup −1} at 0.1 C rate (10 h per half cycle). Such a high performance can be attributed to the synergistic effect between graphene nanosheets and CuO nanorods. The present results indicate that CuO/graphene nanocomposites have potential applications in the anodes of lithium-ion battery.

  15. Synthesis and evaluation of bactericidal properties of CuO nanoparticles against Aeromonas hydrophila

    Directory of Open Access Journals (Sweden)

    Sayedeh Fatemeh Shaffiey

    2014-04-01

    Full Text Available   Objective(s: CuO is one of the most important transition metal oxides due to its captivating properties. It is used in various technological applications such as high critical temperature superconductors, gas sensors, in photoconductive applications, and so on. Recently, it has been used as an antimicrobial agent against various bacterial species.   Materials and Methods: Here, we synthesized CuO nanoparticles (NPs and explored the antibacterial activity of CuO NPs preparation. Results: Single crystalline nanoparticles of copper oxide having almost uniform particle size of 5-6 nm has been synthesized by a facile and versatile route. XRD spectra confirmed the formation of single phase CuO NPs. Transmission electron microscopy results corroborate well with XRD results. The technique employed is free from toxic solvents, organics and amines, is based on a simple reaction of copper sulfate and de-ionized water (DI, and their bactericidal effects against of Aeromonas hydrophila ATCC 7966T bacteria were investigated. Minimum inhibitory concentration (MIC and minimum bactericidal concentration (MBC with liquid culture for all of the Aeromonas hydrophila culture Medias was done. Conclusion: Present study confirms that Copper oxide nanoparticles have great promise as antimicrobial agent against Aeromonas hydrophila

  16. In-plane optical response of $Bi_{2}Sr_{2}CuO_{6}$

    NARCIS (Netherlands)

    Tsvetkov, A. A.; Schützmann, J.; Marel, D. van der

    1997-01-01

    Published in: Phys. Rev. B 55 (1997) 14152 Citing articles (CrossRef) citations recorded in [Science Citation Index] Abstract: We report on infrared reflectivity measurements of the $ab$-plane response of superconducting Bi$_2$Sr$_2$CuO$_6$ single crystals. The frequency dependent conductivity has a

  17. Preparation and Characterization of CuO Nanoparticles by Novel Sol-Gel Technique

    Directory of Open Access Journals (Sweden)

    Y. Aparna

    2012-10-01

    Full Text Available Recent developments of nanosize materials of metal and metal oxide particles are intensively pursued because of their prominence in different fields of applications. Among all the transition metal oxides, CuO is a potential candidate for the application of magnetic storage devices, solar energy transfer, sensors, and super capacitors etc. Moreover CuO nanoparticles act as a good catalyst in some of the chemical reactions. CuO nanoparticles were prepared by novel sol-gel method. In this technique CuCl2.6H2O is added with acetic acid and heated to 100 °C with continuous stirring. To control the ph of the above solution, NaOH is added to the solution till ph reached desired value. The color of the solution changed from blue to black with precipitation. The black precipitation was washed 3 – 4 times with distilled water. Finally the solution was centrifuged and dried in air for one day. The CuO nanoparticles were characterized by studying their structure with X-ray diffraction and composition by energy dispersive X-ray analysis. The size of the nanoparticles is estimated by particle size analyzer and transmission electron microscopy. The optical studies were carried out with Uv-Vis spectrophotometer.

  18. Oxygen Isotope Effect and Structural Phase Transitions in La2CuO4-Based Superconductors.

    Science.gov (United States)

    Crawford, M K; Farneth, W E; McCarronn, E M; Harlow, R L; Moudden, A H

    1990-12-07

    The oxygen isotope effect on the superconducting transition temperature (alpha(o)) varies as a function of x in La2-xSrxCuO(4) and La2-xBaxCuO(4), with the maximum alpha(o) values (alpha(o) >/= 0.5) found for x near 0.12. This unusual x dependence implies that the isotope effect is influenced by proximity to the Abma --> P4(2)/ncm structural phase transition in these systems. Synchrotron x-ray difaction measurements reveal little change in lattice parameters or orthorhombicity due to isotope exchange in strontium-doped materials where alpha(o) > 0.5, eliminating static structural distortion as a cause of the large isotope effects. The anomalous behavior of alpha(o) in both strontium- and barium-doped materials, in combination with the previously discovered Abma --> P4(2)/ncm structural phase-transition in La(1.88)B(0.12)CuO(4), suggests that an electronic contribution to the lattice instability is present and maximizes at approximately 1/8 hole per copper atom. These observations indicate a dose connection between hole doping of the Cu-O sheets, tilting instabilities of the CuO(6) octahedra, and superconductivity in La(2)CuO(4)-based superconductors.

  19. Slave Boson Description of CuO2 Planes of the High-Temperature Superconductors

    Science.gov (United States)

    Mrkonjic, Ivana; Barisic, Slaven

    Slave-boson mean-field calculation is carried out analytically for doped CuO2 conduction planes, described by the extended Emery model which is parameterized by Cu-O charge transfer energy Δpd, Cu-O hopping t0, O-O hopping t' and Coulomb repulsion U localized on Cu site, taken as infinite. At zero doping δ, finite small t' expands the range of stability of the covalent, conducting state, characterized by renormalized band parameters Δpf and t, on the expense of insulating t=0 state, which, however, remains stable at larger Δpd. For sufficiently large Δpd, Δpf saturates at 4|t'|. Finite doping suppresses the insulating state nearly symmetrically with respect to its sign. The regime with Δpf close to 4|t'| fits remarkably well ARPES spectra of Y123, Bi2212 and LSCO, and, in the latter case, explains the observed strong doping-dependence of the effective Cu-O hopping.

  20. Magnetic fluctuations in La1.95Ba0.05CuO4

    DEFF Research Database (Denmark)

    Hayden, S.M.; Aeppli, G.; Mook, H.;

    1991-01-01

    Neutron-scattering and resistivity experiments on single crystals of La1.95Ba0.05CuO4 are described. On warming to as high as 250 K, the correlation length does not change, and the temperature dependence of the generalized susceptibility chi(Q, omega) is due solely to the temperature dependence o...

  1. Legionella pneumophila transcriptional response following exposure to CuO nanoparticles

    Science.gov (United States)

    Copper ions are an effective antimicrobial agent used to control Legionnaires’ disease and Pontiac fever arising from institutional drinking water systems. Here we present data on an alternative bactericidal agent, CuO nanoparticles (CuO-NPs), and test its efficacy at three conce...

  2. Separation of Arsenic from the Antimony-Bearing Dust through Selective Oxidation Using CuO

    Science.gov (United States)

    Zhong, Da-Peng; Li, Lei; Tan, Cheng

    2017-04-01

    A pyrometallurgical process of selective oxidation roasting of the antimony-bearing dust using CuO is put forward, in which the antimony component is oxidized to Sb2O4 staying in the roasted residue, and arsenic is volatilized in the form of As2O3. The addition of CuO has an active effect on the arsenic volatilization, because structures of some complicated As-Sb phases in the dust are destroyed after the "Sb" component in them is oxidized to Sb2O4, and this part of arsenic might be transformed to As2O3, which continues to volatilize. However, the arsenic volatilization rate decreases with the CuO amount in a certain range, which is attributed to the greater formation of Cu3 (AsO4)2 and Cu3As. Under the conditions of roasting temperature of 673 K (400 °C), roasting time of 100 minutes, CuO amount of 34.54 mass pct, and N2 flow rate of 30 mL/min, 91.50 pct arsenic and only 8.63 pct antimony go into the smoke.

  3. Separation of Arsenic from the Antimony-Bearing Dust through Selective Oxidation Using CuO

    Science.gov (United States)

    Zhong, Da-Peng; Li, Lei; Tan, Cheng

    2017-01-01

    A pyrometallurgical process of selective oxidation roasting of the antimony-bearing dust using CuO is put forward, in which the antimony component is oxidized to Sb2O4 staying in the roasted residue, and arsenic is volatilized in the form of As2O3. The addition of CuO has an active effect on the arsenic volatilization, because structures of some complicated As-Sb phases in the dust are destroyed after the "Sb" component in them is oxidized to Sb2O4, and this part of arsenic might be transformed to As2O3, which continues to volatilize. However, the arsenic volatilization rate decreases with the CuO amount in a certain range, which is attributed to the greater formation of Cu3 (AsO4)2 and Cu3As. Under the conditions of roasting temperature of 673 K (400 °C), roasting time of 100 minutes, CuO amount of 34.54 mass pct, and N2 flow rate of 30 mL/min, 91.50 pct arsenic and only 8.63 pct antimony go into the smoke.

  4. Polymer-Controlled Growth of CuO Nanodiscs in the Mild Aqueous Solution

    Institute of Scientific and Technical Information of China (English)

    PENG Yin; LIU Zhengyin; YANG Zihui

    2009-01-01

    CuO nanodiscs have been synthesized on a large scale by a facile solution-based method using polymers as crystal growth modifiers. X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and high resolu-tion transmission electron microscopy (HRTEM) were carded out to characterize the structures and morphologies of the obtained products. The effects of reaction temperature, concentrations of polyacrylamide (PAM) and reac-tants on the morphology and size of the product were studied. The results revealed that the CuO nanodisc had sin-gle-crystal monoclinic structures, and grew along (002) and (110) planes. Experimental conditions had all influence on the shape and size of the final products, but polymer PAM played the key role in formation of the CuO nanodisc.A possible growth mechanism of the CuO nanostructures based on typical polymer-crystal interactions in a mild aqueous solution was given. Polymer-directed crystal growth may provide promising routes to rational synthesis of various ordered inorganic and inorganic-organic hybrid materials with complex forms and structural specialization.

  5. Transmission properties of hollow-core photonic bandgap fibers

    DEFF Research Database (Denmark)

    Falk, Charlotte Ijeoma; Hald, Jan; Petersen, Jan C.

    2010-01-01

    Variations in optical transmission of four types of hollow-core photonic bandgap fibers are measured as a function of laser frequency. These variations influence the potential accuracy of gas sensors based on molecular spectroscopy in hollow-core fibers.......Variations in optical transmission of four types of hollow-core photonic bandgap fibers are measured as a function of laser frequency. These variations influence the potential accuracy of gas sensors based on molecular spectroscopy in hollow-core fibers....

  6. Use of Vegetable Waste Extracts for Controlling Microstructure of CuO Nanoparticles: Green Synthesis, Characterization, and Photocatalytic Applications

    Directory of Open Access Journals (Sweden)

    Hameed Ullah

    2017-01-01

    Full Text Available Chemical syntheses involve either hazardous reactants or byproducts which adversely affect the environment. It is, therefore, desirable to develop synthesis processes which either do not involve hazardous reactants or consume all the reactants giving no byproducts. We have synthesized CuO nanoparticles (NPs adhering to some of the principles of green chemistry. The CuO NPs have been synthesized exploiting extracts of vegetable wastes, that is, Cauliflower waste and Potatoes and Peas peels. The extracts were aimed to work as capping agents to get control over the microstructure and morphology of the resulting CuO NPs. The green synthesized CuO NPs were characterized to explore the microstructure, morphology, optical bandgaps, and photocatalytic performances. XRD revealed that the CuO NPs of all the samples crystallized in a single crystal system, that is, monoclinic. However, the morphologies and the optical bandgaps energies varied as a function of the extract of vegetable waste. Similarly, the CuO NPs obtained through different extracts have shown different photocatalytic activities. The CuO NPs produced with extract of Cauliflower have shown high degradation of MB (96.28% compared to obtained with Potatoes peels (87.37% and Peas peels (79.11%.

  7. Characterization and adsorption performance of Pb(II) on CuO nanorods synthesized by the hydrothermal method

    Energy Technology Data Exchange (ETDEWEB)

    Arfaoui, Lobna; Kouass, Salah [Laboratoire des matériaux utiles, Institut National de Recherche et d' Analyse Physico-Chimique (INRAP) Sidi Thabet, 2020 Tunis (Tunisia); Dhaouadi, Hassouna, E-mail: dhaouadihassouna@yahoo.fr [Laboratoire Matériaux Traitement et Analyse, Institut National de Recherche et d' Analyse Physico-Chimique (INRAP) Sidi Thabet, 2020 Tunis (Tunisia); Jebali, Raouf [Laboratoire des matériaux utiles, Institut National de Recherche et d' Analyse Physico-Chimique (INRAP) Sidi Thabet, 2020 Tunis (Tunisia); Touati, Fathi [Laboratoire Matériaux Traitement et Analyse, Institut National de Recherche et d' Analyse Physico-Chimique (INRAP) Sidi Thabet, 2020 Tunis (Tunisia)

    2015-10-15

    Highlights: • The nanorods of CuO were synthesized by a hydrothermal route without any surfactant. • X-ray diffraction showed monoclinic structure with space group C{sub 2/c}. • The nanorods show relatively high adsorption capacity for the removal of Pb(II). • The adsorption kinetics could be fitted well by the pseudo-second-order model. • The equilibrium data can be fitted well using the Langmuir isotherm model - Abstract: Copper oxide (CuO) nanorods were synthesized by hydrothermal method. The detailed structural, compositional and optical characterization of this material was also evaluated with XRD, FT-IR, EDS, and UV–vis spectroscopy, which confirmed that the obtained nanorods are well-crystallized CuO and possess good optical properties. SEM and TEM studies revealed that the as-synthesized CuO nanorods are uniform with an average diameter of 17 nm. The adsorption activity of the CuO nanostructures was studied. The adsorption results showed that the CuO nanorods are an effective and efficient adsorbent for the removal of Pb(II) ions. The influence of various operational parameters such as the pH of the solution, the contact time and the initial concentrations were also studied and the results were discussed. The estimated maximum lead ion adsorption capacity of the CuO nanorods was found to be 188.67 mg g{sup −1} at an optimum pH of 6.

  8. Effects of CuO Nanoparticles on Microstructure, Physical, Mechanical and Thermal Properties of Self-Compacting Cementitious Composites

    Institute of Scientific and Technical Information of China (English)

    Ali Nazari; Shadi Riahi

    2011-01-01

    In the present study, split tensile strength of self-compacting concrete with different amount of CuO nanoparticles has been investigated. CuO nanoparticles with the average particle size of 15 nm were added partially to self compacting concrete and split tensile strength of the specimens has been measured. The results indicate that CuO nanoparticles are able to improve the split tensile strength of self compacting concrete and recover the negative effects of polycarboxylate superplasticizer on split tensile strength. CuO nanoparticle as a partial replacement of cement up to 4 wt% could accelerate C-S-H gel formation as a result of increased crystalline Ca(OH)2 amount at the early ages of hydration. The increase of the CuO nanoparticles more than 4 wt% causes the decrease of the split tensile strength because of unsuitable dispersion of nanoparticles in the concrete matrix. Accelerated peak appearance in conduction calorimetry tests, more weight loss in thermogravimetric analysis and more rapid appearance of related peaks to hydrated products in X-ray diffraction (XRD) results all also indicate that CuO nanoparticles up to 4 wt% could improve the mechanical and physical properties of the specimens. Finally, CuO nanoparticles could improve the pore structure of concrete and shift the distributed pores to harmless and few-harm pores.

  9. Preparation and characterization of nanocrystalline CuO powders with the different surfactants and complexing agent mediated precipitation method

    Energy Technology Data Exchange (ETDEWEB)

    Rajendran, V.; Gajendiran, J., E-mail: gaja.nanotech@gmail.com

    2014-08-15

    Highlights: • CuO nanostructures by surfactants mediated method. • Structural and optical properties of CuO nanostructures changes under the effect of surface modifier. • Citric acid assisted is the best, in terms of size, morphology and optical properties than that of CTAB, SDS and PEG-400. - Abstract: Nanostructures of copper oxide (CuO) was synthesized into crystallite sized ranging from 20 to 50 nm in the presence of different surfactants, and complex agent such as cityl tri methyl ammonium bromide (CTAB), sodium do decyl sulfate (SDS), poly ethylene glycol (PEG-400) and citric acid via a precipitation route. Variations in several parameters and their effects on the structural and optical properties of CuO nanostructures (crystallite size, morphology and band gap) were investigated by XRD, FTIR, SEM and UV analysis. The UV–visible absorption spectra of the different surfactants and complexing agent assisted CuO nanostructures indicates that the estimated optical band gap energy value (1.94–1.98 eV) is higher than that of the bulk CuO value (1.4 eV), which is attributed to the quantum confinement effect. The formation mechanism of different surfactants and complexing agent assisted CuO nanostructures is also proposed.

  10. Novel β-C3N4/CuO nanoflakes: facile synthesis and unique photocatalytic performance

    Science.gov (United States)

    Zou, Lan-Rong; Huang, Gui-Fang; Li, Dong-Feng; Tian, Qing-Nan; Yang, Ke; Si, Yuan; Chang, Shengli; Zhang, Xue-Ao; Huang, Wei-Qing

    2017-09-01

    For the first time, novel β-C3N4/CuO composites with superior photocatalytic activity are successfully fabricated via a facile reflux method followed by a thermal process. The morphologies, particle size and microstructure of the synthesized β-C3N4/CuO composites largely depended upon copper chloride and the volume ratio of V water:V ethanol in the mixed precursors. The fabricated β-C3N4/CuO nanoflakes exhibited obviously enhanced visible light photocatalytic activity for the degradation of methylene blue (MB) with an  ∼3.4 and 1.9 fold increase in efficiency over that of pure g-C3N4 and commercial P25, respectively. The β-C3N4/CuO composite photocatalyst also showed photocatalytic activity for the degradation of methyl orange (MO). Moreover, the β-C3N4/CuO nanoflakes showed almost no loss of photocatalytic activity after three recycles of the degradation of the MB. A multiple synergetic mechanism in β-C3N4/CuO nanoflakes, which is featured by the highly reactive {0 0 2} facets, exposed many active sites of nanoflakes and the efficient charge separation are proposed to account for the distinguished photocatalytic activity. This work provides a facile and cost-effective strategy for designing novel β-C3N4/CuO photocatalysts for application in environmental purification.

  11. Pulse dispersion in hollow optical waveguides

    Science.gov (United States)

    Ben-David, M.; Ilev, Ilko K.; Waynant, Ronald W.; Gannot, Israel

    2005-09-01

    A study of laser (near- and mid-infrared) pulse dispersion in hollow waveguides is presented. We developed an analytical model to describe the pulse dispersion in hollow waveguides and compared our theoretical calculations with measurements done by us and also by two other groups. The pulse dispersion was experimentally measured for a short Q-switched Er:YAG laser in the nanosecond range and for femtosecond Ti:sapphire laser pulses transmitted by hollow optical waveguides. For analytical calculation of the pulse dispersion in these waveguides, a refined ray tracing program was developed. This approach took into account roughness of the internal reflecting and refracting inner layers. A comparison analysis between the measurements and calculations conducted at identical parameters demonstrates good correlation between theoretical and experimental results.

  12. Hollow glass waveguides for broadband infrared transmission.

    Science.gov (United States)

    Abel, T; Hirsch, J; Harrington, J A

    1994-07-15

    Broadband hollow glass waveguides have been fabricated with losses as low as 0.15 dB/m at 10.6 microm. We make these hollow glass waveguides by coating the inside of polyimide-coated silica-glass tubing with a metallic layer followed by a thin dielectric coating of a metal halide. The bore sizes of the guides range from 320 to 700 microm, and we have made lengths as long as 3 m. The bending radii of the waveguides are less than 5 cm for bore sizes less than 500 microm. We have used these waveguides to deliver greater than 80 W of CO(2) laser power and 5 W of Er:YAG laser power. The hollow glass guides are inexpensive, robust, and quite flexible and therefore a good infrared fiber for power and sensor applications.

  13. Sheet Plasma Produced by Hollow Cathode Discharge

    Institute of Scientific and Technical Information of China (English)

    张龙; 张厚先; 杨宣宗; 冯春华; 乔宾; 王龙

    2003-01-01

    A sheet plasma is produced by a hollow cathode discharge under an axial magnetic field.The plasma is about 40cm in length,4 cm in width and 1cm in thickness.The electron density is about 108cm-3.The hollow cathode is made to be shallow with a large opening,which is different from the ordinary deep hollow cathode.A Langmuir probe is used to detect the plasma.The electron density and the spatial distribution of the plasma change when voltage,pressure and the magnetic field vary.A peak and a data fluctuation at about 200 G-300 G are observed in the variation of electron density(or thickness of the sheet plasma)with the magnetic field.Our work will be helpful in characterizing the sheet plasma and will make the production of dense sheet plasma more controllable.

  14. Solution-dispersed CuO nanoparticles anode buffer layer: Effect of ultrasonic agitation duration on photovoltaic performance

    Science.gov (United States)

    Sabri, Nasehah Syamin; Yap, Chi Chin; Yahaya, Muhammad; Salleh, Muhamad Mat; Jumali, Mohammad Hafizuddin Haji

    2016-11-01

    The performance of inverted type hybrid organic solar cell based on poly(3-hexyltheopene):[6,6]-phenyl C61-butyric acid methyl ester (P3HT:PCBM) can be improved by adding an anode buffer layer of copper oxide (CuO). CuO that serves as an electron blocking layer which could effectively reduce the charge recombination at the photoactive layer (P3HT:PCBM)/silver (Ag) interfaces. At the same time, Cuo anode buffer layer could accelerate the holes collection from the photoactive layer to the top electrode. In this study we investigated the effects of ultrasonic agitation duration in preparation of solution-dispersed CuO anode buffer layer on the performance of the devices with a configuration of fluorine tin oxide (FTO)/zinc oxide (ZnO) nanorod arrays/P3HT:PCBM/ CuO/Ag. Different durations of ultrasonic agitation (0, 5, 15 and 25 min) were used for CuO nanoparticles solution dispersion to obtain the optimum particle size distribution of CuO. It was found that the smallest average particle size of CuO was obtained by applying the ultrasonic agitation for longest duration of 25 min. The highest power conversion efficiency of 1.22% was recorded from the device incorporating with CuO anode buffer layer with the smallest average particle size. It is believed that CuO anode buffer layer with the smallest average particle size had the least agglomerates, thus leading to better film formation and contact surface area.

  15. Generation of a hollow laser beam by a multimode fiber

    Institute of Scientific and Technical Information of China (English)

    Hongyu Ma; Huadong Cheng; Wenzhuo Zhang; Liang Liu; Yuzhu Wang

    2007-01-01

    A simple method to generate a hollow laser beam by multimode fiber is reported. A dark hollow laser beam is generated from a multimode fiber and the dependence of the output beam profile on the incident angle of laser beam is analyzed. The results show that this hollow laser beam can be used to trap and guide cold atoms.

  16. Adiabatic Rearrangement of Hollow PV Towers

    Directory of Open Access Journals (Sweden)

    Eric A Hendricks

    2010-10-01

    Full Text Available Diabatic heating from deep moist convection in the hurricane eyewall produces a towering annular structure of elevated potential vorticity (PV. This structure has been referred to as a hollow PV tower. The sign reversal of the radial gradient of PV satisfies the Charney-Stern necessary condition for combined barotropic-baroclinic instability. For thin enough annular structures, small perturbations grow exponentially, extract energy from the mean flow, and lead to hollow tower breakdown, with significant vortex structural and intensity change. The three-dimensional adiabatic rearrangements of two prototypical hurricane-like hollow PV towers (one thick and one thin are examined in an idealized framework. For both hollow towers, dynamic instability causes air parcels with high PV to be mixed into the eye preferentially at lower levels, where unstable PV wave growth rates are the largest. Little or no mixing is found to occur at upper levels. The mixing at lower and middle levels is most rapid for the breakdown of the thin hollow tower, consistent with previous barotropic results. For both hollow towers, this advective rearrangement of PV affects the tropical cyclone structure and intensity in a number of ways. First, the minimum central pressure and maximum azimuthal mean velocity simultaneously decrease, consistent with previous barotropic results. Secondly, isosurfaces of absolute angular momentum preferentially shift inward at low levels, implying an adiabatic mechanism by which hurricane eyewall tilt can form. Thirdly, a PV bridge, similar to that previously found in full-physics hurricane simulations, develops as a result of mixing at the isentropic levels where unstable PV waves grow most rapidly. Finally, the balanced mass field resulting from the PV rearrangement is warmer in the eye between 900 and 700 hPa. The location of this warming is consistent with observed warm anomalies in the eye, indicating that in certain instances the hurricane

  17. High-performance nanothermite composites based on aloe-vera-directed CuO nanorods.

    Science.gov (United States)

    Patel, Vinay Kumar; Bhattacharya, Shantanu

    2013-12-26

    In this work, we demonstrate the development of high-performance nanothermite composites derived from super-reactive CuO nanorods oxidizers fabricated by simple biogenic routes using Aloe vera plant extracts. Nanorods of various length scales have been realized via simple sonoemulsion and solid-state biosynthesis routes using Aloe vera gel as a green surfactant promoting the directional growth of CuO nanorods in both solid and emulsion phase. The biosynthesized CuO nanorods (oxidizers)/fuel (nanoaluminum) composites ignited vigorously with abundant gas generation, developing high heat of reaction of 1.66 kJ g(-1) and very high pressurization rate of around 1.09 MPa μs(-1) and peak pressure of 65.4 MPa when blasted inside a constant volume pressure cell with a charge density of 0.2 g cm(-3). The pressurization rates so obtained are four times higher with twice the peak pressure in comparison to such nanothermites formulated via other available state of the art wet-chemical techniques, which reflects the catalytic role of Aloe vera surface functional groups (A. vera-sfg) enhancing the reactivity of CuO oxidizers with excess gas release rate during exothermic reaction with nanoaluminum. Through this work, Aloe vera gel has for the first time been identified as a novel biotemplate for green synthesis of nanorod structures of metal oxides, and we have also studied the utility of A. vera-sfg in the creation of super-reactive CuO oxidizers producing excellent heat of reaction and dynamic pressure characteristics as demanded in propellants, explosives, and pyrotechnics.

  18. Hollow electrode loose plate SOFC design

    Energy Technology Data Exchange (ETDEWEB)

    Jaspers, B.C.; Dongen, B.A.M. van; Monaster, G.A. [Seed Capital Investments B.V., Utrecht (Netherlands); Roosmalen, J.A.M. van; Plaisier, K.H.; Schoonman, J. [Delft Univ. of Technology (Netherlands). Lab. for Applied Inorganic Chemistry

    1995-12-31

    A novel planar SOFC design is presented, based on the loose stacking of hollow electrode elements, conventional plate type electrolytes and interconnectors. This facilitates free thermal expansion during operation, and thermal cycling, thereby significantly improving prospects for reliable SOFC operation in power generation practice. Each individual element only consists of one material, eliminating the need for sealing and for matching thermal expansion coefficients of fuel cell components. Application of hollow electrodes results in an inherent manifolding of the gas streams eliminating the need for seals at the fuel cell stack itself. The design has been tested at laboratory scale and a small working prototype fuel cell has been successfully tested.

  19. Scaffold Characteristics for Functional Hollow Organ Regeneration

    Directory of Open Access Journals (Sweden)

    Daniel Eberli

    2010-01-01

    Full Text Available Many medical conditions require surgical reconstruction of hollow organs. Tissue engineering of organs and tissues is a promising new technique without harvest site morbidity. An ideal biomaterial should be biocompatible, support tissue formation and provide adequate structural support. It should degrade gradually and provide an environment allowing for cell-cell interaction, adhesion, proliferation, migration, and differentiation. Although tissue formation is feasible, functionality has never been demonstrated. Mainly the lack of proper innervation and vascularisation are hindering contractility and normal function. In this chapter we critically review the current state of engineering hollow organs with a special focus on innervation and vascularisation.

  20. Archetypal sandwich-structured CuO for high performance non-enzymatic sensing of glucose

    Science.gov (United States)

    Meher, Sumanta Kumar; Rao, G. Ranga

    2013-02-01

    In the quest to enhance the selectivity and sensitivity of novel structured metal oxides for electrochemical non-enzymatic sensing of glucose, we report here a green synthesis of unique sandwich-structured CuO on a large scale under microwave mediated homogeneous precipitation conditions. The physicochemical studies carried out by XRD and BET methods show that the monoclinic CuO formed via thermal decomposition of Cu2(OH)2CO3 possesses monomodal channel-type pores with largely improved surface area (~43 m2 g-1) and pore volume (0.163 cm3 g-1). The fascinating surface morphology and pore structure of CuO is formulated due to homogeneous crystallization and microwave induced self assembly during synthesis. The cyclic voltammetry and chronoamperometry studies show diffusion controlled glucose oxidation at ~0.6 V (vs. Ag/AgCl) with extremely high sensitivity of 5342.8 μA mM-1 cm-2 and respective detection limit and response time of ~1 μM and ~0.7 s, under a wide dynamic concentration range of glucose. The chronoamperometry measurements demonstrate that the sensitivity of CuO to glucose is unaffected by the absence of dissolved oxygen and presence of poisoning chloride ions in the reaction medium, which essentially implies high poison resistance activity of the sandwich-structured CuO. The sandwich-structured CuO also shows insignificant interference/significant selectivity to glucose, even in the presence of high concentrations of other sugars as well as reducing species. In addition, the sandwich-structured CuO shows excellent reproducibility (relative standard deviation of ~2.4% over ten identically fabricated electrodes) and outstanding long term stability (only ~1.3% loss in sensitivity over a period of one month) during non-enzymatic electrochemical sensing of glucose. The unique microstructure and suitable channel-type pore architecture provide structural stability and maximum accessible electroactive surface for unimpeded mobility of glucose as well as the

  1. The Hollow-Face Illusion in Infancy: Do Infants See a Screen Based Rotating Hollow Mask as Hollow?

    Directory of Open Access Journals (Sweden)

    Aki Tsuruhara

    2011-06-01

    Full Text Available We investigated whether infants experience the hollow-face illusion using a screen-based presentation of a rotating hollow mask. In experiment 1 we examined preferential looking between rotating convex and concave faces. Adults looked more at the concave—illusory convex—face which appears to counter rotate. Infants of 7- to 8-month-old infants preferred the convex face, and 5- to 6-month-olds showed no preference. While older infants discriminate, their preference differed from that of adults possibly because they don't experience the illusion or counter rotation. In experiment 2 we tested preference in 7- to 8-month-olds for angled convex and concave static faces both before and after habituation to the stimuli shown in experiment 1. The infants showed a novelty preference for the static shape opposite to the habituation stimulus, together with a general preference for the static convex face. This shows that they discriminate between convex and concave faces and that habituation to either transfers across a change in view. Seven- to eight-month-olds have been shown to discriminate direction of rigid rotation on the basis of perspective changes. Our results suggest that this, perhaps together with a weaker bias to perceive faces as convex, allows these infants to see the screen-based hollow face as hollow even though adults perceive it as convex.

  2. Soft-template-synthesis of hollow CuO/Co3O4 composites for pseudo-capacitive electrode: A synergetic effect on electrochemical performance

    Science.gov (United States)

    Wang, Kuaibing; Lv, Bo; Wu, Hua; Luo, Xuefei; Xu, Jiangyan; Geng, Zhirong

    2016-12-01

    Hollow CuO/Co3O4 hybrids, which inherited from its coordination polymer precursor consisting of sheets layer and nanoparticles layer composites, were synthesized and characterized by SEM, EDX, XRD and XPS. To assess its electrochemical capacitive performances, cyclic voltammetry, galvanostatic charging-discharging measurements and A.C. impedance tests were performed successively. The CuO/Co3O4 hybrids had higher capacitance and lower charge transfer resistance than bare Co3O4 nanostructures, revealing that it provided a protection layer and produced a synergistic effect due to the existence of CuO layer. The distinct synergistic effect could be further confirmed by endurance cycling tests. The capacitance of the CuO/Co3O4 hybrids was 111% retained after 500 cycles at a charging rate of 1.0 A g-1 and remained an intense growth trend after 2000 cycles at scan rate of 200 mV s-1.

  3. Template engaged synthesis of hollow ceria-based composites

    Science.gov (United States)

    Chen, Guozhu; Rosei, Federico; Ma, Dongling

    2015-03-01

    Hollow ceria-based composites, which consist of noble metal nanoparticles or metal oxides as a secondary component, are being studied extensively for potential applications in heterogeneous catalysis. This is due to their unique features, which exhibit the advantages of a hollow structure (e.g. high surface area and low weight), and also integrate the properties of ceria and noble metals/metal oxides. More importantly, the synergistic effect between constituents in hollow ceria-based composites has been demonstrated in various catalytic reactions. In this feature article, we summarize the state-of-the-art in the synthesis of hollow ceria-based composites, including traditional hard-templates and more recently, sacrificial-template engaged strategies, highlighting the key role of selected templates in the formation of hollow composites. In addition, the catalytic applications of hollow ceria-based composites are briefly surveyed. Finally, challenges and perspectives on future advances of hollow ceria-based composites are outlined.

  4. Evidence of fire resistance of hollow-core slabs

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl; Sørensen, Lars Schiøtt; Giuliani, Luisa

    Hollow-core slabs have during the past 50 years comprised a variety of different structures with different cross-sections and reinforcement. At present the extruded hollow-core slabs without cross-reinforcement in the bottom flange and usually round or oval longitudinal channels (holes...... is therefore going on in the Netherlands about the fire resistance of hollow-core slabs. In 2014 the producers of hollow-core slabs have published a report of a project called Holcofire containing a collection of 162 fire tests on hollow-core slabs giving for the first time an overview of the fire tests made....... The present paper analyses the evidence now available for assessment of the fire resistance of extruded hollow-core slabs. The 162 fire tests from the Holcofire report are compared against the requirements for testing from the product standard for hollow-core slabs EN1168 and knowledge about the possible...

  5. Hollow-atom probing of surfaces

    NARCIS (Netherlands)

    Limburg, J.

    1997-01-01

    This paper discusses the mechanisms governing the formation and decay of hollow atoms in front of (semi) conducting and insulating surfaces. First, the primary neutralization of the highly charged ions is treated in terms of the classical overbarrier model. Different views are presented. Then the mo

  6. Galvanic Synthesis of Hollow Gold Nanoshells

    Science.gov (United States)

    2015-02-01

    pulses in the NIR.2 The advantage of hollow nanoshells over solid gold (Au) or silver (Ag) nanoparticles , or alloys thereof,3 is that the...Karna SP. Synthesis of gold and silver nanoparticles and characterization of structural, optical, and electronic properties. Aberdeen Proving Ground...

  7. Toxicity of CuO nanoparticles and Cu ions to tight epithelial cells from Xenopus laevis (A6)

    DEFF Research Database (Denmark)

    Thit, Amalie; Selck, Henriette; Bjerregaard, Henning F.

    2013-01-01

    ) was used to investigate toxicity of copper (Cu) in 3 different forms; Cu ions (Cu2+), CuO NPs (6 nm) and poly-dispersed CuO NPs (100 nm, poly-CuO). Continuous exposures at concentrations of 143–200 μM demonstrated that cytotoxicity differed among the 3 Cu forms tested and that the effects depend on cell...... state (dividing or differentiated). Dividing cells treated with poly-CuO, CuO NPs (6 nm) or Cu2+ showed cell cycle arrest and caused significant increase in cell death via apoptosis after 48 h, 6 and 7 days of treatment, respectively. Treatment with either CuO NPs (6 nm) or Cu2+ caused significant...... decrease in cell proliferation. Treatments of differentiated cells, revealed the same patterns of toxicity for Cu forms tested, but after shorter exposure periods....

  8. CuFe2 O4 -CuO Nanocomposites as Promising Materials for Solar Hydrogen Generation

    Science.gov (United States)

    Razavi, Mehdi; Amrollahi, Pouya; Yazdimamaghani, Mostafa; Tayebi, Lobat; Vashaee, Daryoosh

    2014-03-01

    Currently, hydrogen is produced, almost exclusively, by waterelectrolysis. This method can take advantage of economies of scale and most established techniques of producing hydrogen. We developed a nanocomposite material system composed of CuFe2O4 and CuO semiconductor particles to produce hydrogen by electrolysis of water. The nanocomposite powder was prepared using the sol-gel method. Techniques of X-ray diffraction, scanning electron microscopy with energy dispersive spectroscopy, transmission electron microscopy and UV diffuse reflectance analysis were employed to characterize the synthesized products.The results confirmed the formation of CuFe2O4-CuO nanocomposite powder. The hydrogen evolution was successfully observed over the new hetero-system of CuFe2O4-CuO. The electrolysis activity depended on the concentration of CuO in the system. In order to enhance the hydrogen production, we further optimized the composite material versus the concentration of the compounds.

  9. Characterization and DC Conductivity of Novel CuO doped Polyvinyl Alcohol (PVA Nano-composite Films

    Directory of Open Access Journals (Sweden)

    Chivukula Srikanth

    2014-10-01

    Full Text Available DC conductivity of PVA-CuO nano-composite films have been studied in the present work. The composites were prepared by solution-casting technique. The prepared PVA-CuO composites have been characterized by X-ray diffraction (XRD analysis, Fourier Transform Infrared Spectroscopy (FT-IR, Scanning Electron Microscopy (SEM and Energy Dispersive X-ray Spectroscopy (EDXS; which confirmed the presence of CuO in polyvinyl alcohol and the formation of the composite. DC conductivity studies show thermally activated behavior of all the composites. The conductivity was found to increase with the increase in temperature indicating the semiconducting behavior of all the compositions. The activation energy increases as the content of CuO nanoparticles increases from 1 to 4 in wt% in the PVA- CuO nano-composites. Maximum conductivity was observed in 4 wt% of CuO in polyvinyl alcohol.

  10. Formation of Hierarchical CuO Nanostructures on Copper Foil by Chemical Bath Deposition for Applications in Superhydrophobic Surfaces

    Directory of Open Access Journals (Sweden)

    Felizco Jenichi Clairvaux

    2016-01-01

    Full Text Available Hierarchical CuO nanostructures (urchin-like and grassy island structure were successfully synthesized by a simple chemical bath deposition method at low temperature of 70°C in a short reaction time of 1h. XRD analysis revealed the presence of pure crystalline monoclinic CuO. Morphological analysis revealed the formation of spherical structures composed of numerous hair-like structures. The pH of the solution was also investigated to have a great effect on the morphology of the CuO nanostructures. At lower pH, the structures tend to form urchin-like structures; while at higher pH, the structures tend to form grass-like islands. A growth mechanism was also proposed in this paper. Lastly, wettability test proved the stable superhydrophobic property of the CuO nanostructured thin film surface.

  11. Speciation of ZnO and CuO nanoparticles exposed to culture medium and lymphocyte cells

    Data.gov (United States)

    U.S. Environmental Protection Agency — Spectral fits and linear combination data for ZnO and CuO nanoparticles exposure during toxicity testing. This dataset is associated with the following publication:...

  12. Magnetoresistive study of the antiferromagnetic-weak ferromagnetic transition in single-crystal La2CuO4+δ

    Science.gov (United States)

    Belevtsev, B. I.; Dalakova, N. V.; Savitsky, V. N.; Panfilov, A. S.; Braude, I. S.; Bondarenko, A. V.

    2004-05-01

    Resistive measurements were made to study the magnetic field-induced antiferromagnetic (AF)—weak ferromagnetic (WF) transition in the La2CuO4 single crystal. The magnetic field (dc or pulsed) was applied normally to the CuO2 layers. The transition manifested itself in a drastic decrease of the resistance in critical fields of 5-7 T. The study is the first to display the effect of the AF-WF transition on the conductivity of the La2CuO4 single crystal in the direction parallel to the CuO2 layers. The results provide support for the three-dimensional nature of the hopping conduction of this layered oxide.

  13. Synthesis of chrysalis-like CuO nanocrystals and their catalytic activity in the thermal decomposition of ammonium perchlorate

    Indian Academy of Sciences (India)

    Jun Wang; Shanshan He; Zhanshuang Li; Xiaoyan Jing; Milin Zhang; Zhaohua Jiang

    2009-11-01

    Chrysalis-like morphologies of CuO have been synthesized in large-quantity via a simple chemical deposition method without the use of any complex instruments and reagents. CuO nanocrystals showed a different morphology at three different temperatures, 25, 60 and 100°C. The particle size, morphology and crystal structure of the samples were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and Raman spectra. The catalytic effect of CuO nanoparticles on the decomposition of ammonium perchlorate (AP) was investigated by STA 409 PC thermal analyzer at a heating rate of 10°C min-1 from 35 to 500°C. Compared with the thermal decomposition of pure AP, the addition of CuO nanoparticles decreased the decomposition temperature of AP by about 85°C.

  14. Preparation and sonocatalytic activity of monodisperse porous bread-like CuO via thermal decomposition of copper oxalate precursors

    Science.gov (United States)

    Zhang, Lihui; Liu, Rong; Yang, Heqing

    2012-04-01

    Porous bread-like CuO have been obtained via the thermal decomposition of copper oxalate precursor synthesized by the room temperature reaction of Cu(NO3)2 with Na2C2O4 in water. These bread-like CuO with the monoclinic structure are well dispersed with good monodispersity, their diameters are about 1.5 μm. The sonocatalytic activity of porous CuO for the degradation of acid scarlet dye was studied. It was found that the as-prepared porous CuO nanostructures exhibit efficient sonocatalytic ability for the degradation of acid scarlet dye in the presence of H2O2, which are expected to be useful in the treatment of non- or low-transparent wastewaters.

  15. Unravelling the quantum-entanglement effect of noble gas coordination on the spin ground state of CUO

    CERN Document Server

    Tecmer, Pawel; Legeza, Ors; Reiher, Markus

    2013-01-01

    The accurate description of the complexation of the CUO molecule by Ne and Ar noble gas matrices represents a challenging task for present-day quantum chemistry. Especially, the accurate prediction of the spin ground state of different CUO--noble-gas complexes remains elusive. In this work, the interaction of the CUO unit with the surrounding noble gas matrices is investigated in terms of complexation energies and dissected into its molecular orbital quantum entanglement patterns. Our analysis elucidates the anticipated singlet--triplet ground-state reversal of the CUO molecule diluted in different noble gas matrices and demonstrates that the strongest uranium-noble gas interaction is found for CUOAr4 in its triplet configuration.

  16. Cupric Oxide (CuO) Oxidation Detects Pyrogenic Carbon in Burnt Organic Matter and Soils.

    Science.gov (United States)

    Hatten, Jeff; Goñi, Miguel

    2016-01-01

    Wildfire greatly impacts the composition and quantity of organic carbon stocks within watersheds. Most methods used to measure the contributions of fire altered organic carbon-i.e. pyrogenic organic carbon (Py-OC) in natural samples are designed to quantify specific fractions such as black carbon or polyaromatic hydrocarbons. In contrast, the CuO oxidation procedure yields a variety of products derived from a variety of precursors, including both unaltered and thermally altered sources. Here, we test whether or not the benzene carboxylic acid and hydroxy benzoic acid (BCA) products obtained by CuO oxidation provide a robust indicator of Py-OC and compare them to non-Py-OC biomarkers of lignin. O and A horizons from microcosms were burned in the laboratory at varying levels of fire severity and subsequently incubated for 6 months. All soils were analyzed for total OC and N and were analyzed by CuO oxidation. All BCAs appeared to be preserved or created to some degree during burning while lignin phenols appeared to be altered or destroyed to varying extents dependent on fire severity. We found two specific CuO oxidation products, o-hydroxybenzoic acid (oBd) and 1,2,4-benzenetricarboxylic acid (BTC2) that responded strongly to burn severity and withstood degradation during post-burning microbial incubations. Interestingly, we found that benzene di- and tricarboxylic acids (BDC and BTC, respectively) were much more reactive than vanillyl phenols during the incubation as a possible result of physical protection of vanillyl phenols in the interior of char particles or CuO oxidation derived BCAs originating from biologically available classes of Py-OC. We found that the ability of these compounds to predict relative Py-OC content in burned samples improved when normalized by their respective BCA class (i.e. benzene monocarboxylic acids (BA) and BTC, respectively) and when BTC was normalized to total lignin yields (BTC:Lig). The major trends in BCAs imparted by burning

  17. CdS quantum dots modified CuO inverse opal electrodes for ultrasensitive electrochemical and photoelectrochemical biosensor

    OpenAIRE

    2015-01-01

    The CuO inverse opal photonic crystals (IOPCs) were synthesized by the sol-gel method and modified with CdS quantum dots by successive ionic layer adsorption and reaction (SILAR). CdS QDs modified CuO IOPCs FTO electrodes of different SILAR cycles were fabricated and their electrochemical properties were studied by cyclic voltammetry (CV) and chronoamperometry (I–t). Structure and morphology of the samples were characterized by transmission electron microscopy (TEM), scanning electron microsc...

  18. The effect of CuO NPs on reactive oxygen species and cell cycle gene expression in roots of rice.

    Science.gov (United States)

    Wang, Shuling; Liu, Hanzhu; Zhang, Yuxi; Xin, Hua

    2015-03-01

    To evaluate the effect of CuO nanoparticles (NPs) on root growth, root reactive oxygen species (ROS) production, and the expression of 2 genes (OsCDC2 and OsCYCD) associated with root growth of Oryza sativa (rice), rice roots were treated with 5 mg/L CuO NP suspension, 5 mg/L CuO bulk particle suspension, and 0.27 mg/L CuSO4  · 5H2 O solution, with distilled water as control. The results indicated that CuO NPs and Cu(2+) severely inhibited the elongation and biomass of rice roots after 72-h exposure. Dyeing with 7'-dichlorodihydrofluorescein-diacetate (DCFH-DA) showed that in all 3 treatment groups, the fluorescence was primarily located in the meristem zone, demonstrating that the meristem zone was where ROS were primarily generated. In addition, a significant increase in ROS was detected in the meristem zone of roots treated with the CuO NP suspension and the CuSO4  · 5H2 O solution, both of which greatly influenced the expression level of OsCDC2 and OsCYCD. The impact of Cu(2+) on these 2 genes was smaller than that of CuO NPs. The Cu content in roots of rice after treatment with CuO NPs was much higher than that found after the other treatments, which indicated that CuO NPs may have been absorbed into root tissue. Collectively, these data suggest that growth inhibition, higher ROS production, and gene expression inhibition may be caused not only by the ions themselves, but also the NPs. © 2014 SETAC.

  19. Magnetic properties of doped and undoped CuO nanoparticles taking into account spin-phonon interactions

    Science.gov (United States)

    Wesselinowa, J. M.

    2011-03-01

    We have studied the influence of doping effects on magnetization M and Neel temperature T of CuO nanoparticles based on the Heisenberg model including spin-phonon interactions. The experimentally obtained room temperature magnetization M is due to surface or/and doping effects in CuO nanoparticles. We have shown the importance of the effect of the spin-phonon interaction on different properties.

  20. Shape-controlled synthesis of Sn-doped CuO nanoparticles for catalytic degradation of Rhodamine B.

    Science.gov (United States)

    Vomáčka, Petr; Štengl, Václav; Henych, Jiří; Kormunda, Martin

    2016-11-01

    The uniform Sn-doped CuO nanoparticles were synthesized by a simple solution method at a low temperature. The prepared samples were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), electron microscopy techniques (HRSEM, HRTEM, SAED, STEM and EDS elemental mapping), atomic force microscopy (AFM), UV/Vis spectroscopy, nitrogen physisorption (BET) and by evaluation of the catalytic activity on the degradation of Rhodamine B. The tin doping had a considerable influence on the morphology of CuO. The gradual narrowing of the particles morphology in the crystallographic [010] direction was observed with increasing the dopant concentration. The plate-like, rectangularsquare and rod-like CuO nanoparticles were obtained. The mechanism of a crystal growth of CuO associated with doping is proposed. The tin doping also affected the structural and optical properties of CuO. Increasing the amount of a dopant led to a red-shift of a band gap from 1.33 to 1.18eV. The incorporation of tin into the structure of copper oxide was confirmed by XRD and distribution of tin mapped by EDS analysis. The good catalytic properties of the as-prepared doped material were demonstrated by the enhanced catalytic removal of Rhodamine B in the presence of H2O2. The undoped CuO nanosheets reached only 24% efficiency in the removal of Rhodamine B within two hours. The best result exhibited CuO_050Sn sample containing 4at.% of tin and the degradation of Rhodamine B reached 99% within the same time. We have demonstrated a simple, scalable process for the preparation of catalytically very active Sn-doped CuO nanoparticles with varying properties.

  1. Magnetic properties of doped and undoped CuO nanoparticles taking into account spin-phonon interactions

    Energy Technology Data Exchange (ETDEWEB)

    Wesselinowa, J.M., E-mail: julia@phys.uni-sofia.b [University of Sofia, Department of Physics, 5 J. Bouchier Blvd., 1164 Sofia (Bulgaria)

    2011-03-14

    We have studied the influence of doping effects on magnetization M and Neel temperature T{sub N} of CuO nanoparticles based on the Heisenberg model including spin-phonon interactions. The experimentally obtained room temperature magnetization M is due to surface or/and doping effects in CuO nanoparticles. We have shown the importance of the effect of the spin-phonon interaction on different properties.

  2. One-dimensional variable range hopping conduction in a single crystal of La 2CuO 4+y

    Science.gov (United States)

    Corraze, B.; Ribault, M.

    1993-02-01

    We have measured the resistivity perpendicular to the CuO 2 planes, in the magnetically ordered phases of a single crystal of La 2CuO 4+y as a function of temperature. Within a limited temperature range a one-dimensional variable range hopping conduction mechanism is identified, in zero magnetic field. The analysis of both the temperature range and the magnetic field variation shows that this mechanism is strongly dependent on the intraplane and on the interplane couplings.

  3. One dimensional CuO nanocrystals synthesis by electrical explosion: A study on structural, optical and electronic properties

    Energy Technology Data Exchange (ETDEWEB)

    Krishnan, Shutesh, E-mail: shutesh.k@onsemi.com [Department of Mechanical Engineering University of Malaya, 50603 Kuala Lumpur (Malaysia); ON Semiconductor Package Innovation and Development Center, 70450 Seremban (Malaysia); Haseeb, A.S.M.A.; Johan, Mohd Rafie [Department of Mechanical Engineering University of Malaya, 50603 Kuala Lumpur (Malaysia)

    2014-02-15

    Highlights: • One-dimensional CuO nanoflakes were synthesized by novel wire explosion technique. • A physical synthesis method capable of producing high aspect ratio (1:16) nanocrystals. • Most energy efficient and eco-friendly synthesis of low-dimensional transition metal oxide nanocrystals. -- Abstract: One-dimensional (1D) copper oxide (CuO) nanocrystals were synthesized using a novel wire explosion in de-ionized (DI) water without any chemical additives. Highly crystalline 1D CuO nanocrystals with 1:16 aspect ratio were successfully synthesized using this technique. The chemical nature and physical structure of the nanocrystals were controlled by simply modulating the exploding medium temperature. The results showed that nanocrystals produced at explosion temperatures 65 °C and 95 °C are pure CuO with optical band-gap energy of 2.38 eV. High Resolution Transmission Electron Microscope analysis (HRTEM) indicates that the CuO nanocrystals are with growth in [1{sup ¯}11] and [1 1 1] directions. The epitaxial crystal growth kinetics of the 1D nanostructure by aggregation was discussed. The incorporation of microstructural features like edge dislocations and porosity in the growth mechanism was examined. X-ray photoelectron spectroscopy (XPS) characterization indicates the formation of high purity CuO nanocrystals with valence state +2. This study provides an energy efficient and eco-friendly synthesis method of 1D transition metal oxide nanocrystals for electronic applications.

  4. Novel CuCr2O4 embedded CuO nanocomposites for efficient photodegradation of organic dyes

    Science.gov (United States)

    Mageshwari, K.; Sathyamoorthy, R.; Lee, Jeong Yong; Park, Jinsub

    2015-10-01

    Novel photocatalyst based on CuO-CuCr2O4 nanocomposites was synthesized for different Cr3+ concentration by reflux condensation method, and their photocatalytic activity was evaluated by monitoring the photodegradation of methyl orange (MO) and methylene blue dyes (MB) under UV light irradiation. Phase evolution by X-ray diffraction showed monoclinic CuO and tetragonal CuCr2O4 as the components of the prepared nanocomposites. Morphological analysis by scanning electron microscope and transmission electron microscope revealed that the incorporation of Cr3+ in CuO lattice alters the morphology of CuO from microsphere to cluster shape. Photoluminescence spectra of CuO-CuCr2O4 nanocomposites exhibited reduced PL emissions compared to pure CuO, indicating the low recombination rate of photogenerated electrons and holes. As expected, the CuCr2O4 loaded CuO showed enhanced photocatalytic activity for MO and MB dyes, and the kinetic studies suggest that the degradation follows pseudo-first-order kinetics. The enhanced photocatalytic activity of CuO-CuCr2O4 nanocomposites can be attributed to the presence of CuCr2O4 as an electron acceptor, which improves the effective charge separation in CuO.

  5. Bioaccumulation and toxicity of CuO nanoparticles by a freshwater invertebrate after waterborne and dietborne exposures

    Science.gov (United States)

    Croteau, Marie-Noele; Misra, Superb K.; Luoma, Samuel N.; Valsami-Jones, Eugenia

    2014-01-01

    The incidental ingestion of engineered nanoparticles (NPs) can be an important route of uptake for aquatic organisms. Yet, knowledge of dietary bioavailability and toxicity of NPs is scarce. Here we used isotopically modified copper oxide (65CuO) NPs to characterize the processes governing their bioaccumulation in a freshwater snail after waterborne and dietborne exposures. Lymnaea stagnalis efficiently accumulated 65Cu after aqueous and dietary exposures to 65CuO NPs. Cu assimilation efficiency and feeding rates averaged 83% and 0.61 g g–1 d–1 at low exposure concentrations (–1), and declined by nearly 50% above this concentration. We estimated that 80–90% of the bioaccumulated 65Cu concentration in L. stagnalis originated from the 65CuO NPs, suggesting that dissolution had a negligible influence on Cu uptake from the NPs under our experimental conditions. The physiological loss of 65Cu incorporated into tissues after exposures to 65CuO NPs was rapid over the first days of depuration and not detectable thereafter. As a result, large Cu body concentrations are expected in L. stagnalis after exposure to CuO NPs. To the degree that there is a link between bioaccumulation and toxicity, dietborne exposures to CuO NPs are likely to elicit adverse effects more readily than waterborne exposures.

  6. A chemical reaction controlled mechanochemical route to construction of CuO nanoribbons for high performance lithium-ion batteries.

    Science.gov (United States)

    Chen, Kunfeng; Xue, Dongfeng

    2013-12-07

    We reported a chemical reaction controlled mechanochemical route to synthesize mass CuO nanosheets by manual grinding in a mortar and pestle, which does not require any solvent, complex apparatus and techniques. The activation of chemical reactions by milling reactants was thus proved, and the energy from mechanical grinding promotes the fast formation of CuO nanoribbons. The resultant materials have preferential nanoscale ribbon-like morphology that can show large capacity and high cycle performance as lithium-ion battery anodes. After 50 cycles, the discharge capacity of CuO nanoribbon electrodes is 614.0 mA h g(-1), with 93% retention of the reversible capacity. The thermodynamic reactions of the CuO battery showed size-dependent characterization. The microstructures of CuO nanosheets and reaction routes can be controlled by the ratio of NaOH/CuAc2 according to the chemical reactions involved. The intact nanoribbon structure, thin-layer, and hierarchical structures endow present CuO materials with high reversible capacity and excellent cycling performances. The simple, economical, and environmentally friendly mechanochemical route is of great interest in modern synthetic chemistry.

  7. Effect of Cobalt Doping on Nanostructured CuO Thin Films

    Science.gov (United States)

    Bayansal, Fatih; Taşköprü, Turan; Şahin, Bünyamin; Çetinkara, Hacı Ali

    2014-07-01

    The growth of cobalt-doped nanostructured CuO thin films using the successive ionic layer adsorption and reaction (SILAR) method is presented. It is found that Co doping considerably influences the structural (X-ray diffraction (XRD)), morphological (finite-element-scanning electron microscopy (FESEM)), and optical (ultraviolet/visible (UV/vis.) and Raman) properties of the films. XRD experiments evidence that the crystallite size of the films decreased with increasing Co doping. FESEM images reveal that the grain size of the nanostructures decreased with increasing doping concentration. By UV/vis. analysis, it is found that Co doping has a decreasing effect on band gap energy. The broadening and downshift of the Raman peaks are mainly attributed to the quantum confinement effect of CuO nanostructures.

  8. Realistic electronic structure calculations for magnetic insulators like La2CuO4

    Science.gov (United States)

    Grant, J. B.; McMahan, A. K.

    1991-01-01

    We suggest that Hartree-Fock theory is a good starting point for the solution of ab initio-derived extended Hubbard Hamiltonians for magnetic insulators like La2CuO4, as indicated by surprisingly accurate results for the superchange frequencies and insulating gaps for this material and isostructural La2NiO4, K2CuF4, and K2NiF4. Limited configuration interaction beyond Hartree-Fock theory is then used to demonstrate that admixtures of a1- (d23z-r2 -) symmetry states at energies somewhat away from the gap edge are essential to the dispersion of the first quasiparticle branch in La2CuO4 for doped-in holes.

  9. Study of Optical Band Gap of CuO Using Fermi's Golden Rule

    Science.gov (United States)

    Nemade, K. R.; Waghuley, S. A.

    2012-05-01

    Quantum size effect where the electronic and optical properties of solids are altered due to changes in the band structures, enhanced the surface/volume ratio in nano dimensions forces more than 33% of the atoms to be on the surface (for 10nm dot 35), which drastically altering the physical properties such as having lower melting temperature and lower sintering temperature, and higher diffusion force at elevated temperatures. Consequently, its Fermi's golden rule analysis becomes crucial. Cupric oxide (CuO) is an important transition metal oxide with the basis of several high temperature superconductors and giant magnetoresistance materials. In present investigation, optical Band Gap from UV data using Fermi's golden rule for single step chemically synthesized CuO was computed.

  10. Preparation and characterization of nanostructured CuO thin films for photoelectrochemical splitting of water

    Indian Academy of Sciences (India)

    Diwakar Chauhan; V R Satsangi; Sahab Dass; Rohit Shrivastav

    2006-12-01

    Nanostructured copper oxide thin films (CuO) were prepared on conducting glass support (SnO2: F overlayer) via sol–gel starting from colloidal solution of copper (II) acetate in ethanol. Films were obtained by dip coating under room conditions (temperature, 25–32°C) and were subsequently sintered in air at different temperatures (400–650°C). The evolution of oxide coatings under thermal treatment was studied by glancing incidence X-ray diffraction and scanning electron microscopy. Average particle size, resistivity and band gap energy were also determined. Photoelectrochemical properties of thin films and their suitability for splitting of water were investigated. Study suggests that thin films of CuO sintered at lower temperatures (≈ 400°C) are better for photoconversion than thick films or the films sintered at much higher temperatures. Plausible explanations have been provided.

  11. Controlled synthesis of CuO nanostructures on Cu foil, rod and grid

    Energy Technology Data Exchange (ETDEWEB)

    Vanithakumari, S.C.; Shinde, S.L. [Materials Research Centre, Indian Institute of Science, C.V. Raman Avenue, Malleswaram, Bangalore 560012, Karnataka (India); Nanda, K.K., E-mail: nanda@mrc.iisc.ernet.in [Materials Research Centre, Indian Institute of Science, C.V. Raman Avenue, Malleswaram, Bangalore 560012, Karnataka (India)

    2011-05-15

    CuO nanowires are synthesized by heating Cu foil, rod and grid in ambient without employing a catalyst or gas flow at temperatures ranging from 400 to 800 deg. C for a duration of 1-12 h. Scanning electron microscopy (SEM) investigation reveals the formation of nanowires. The structure, morphology and phase of the as-synthesized nanowires are analyzed by various techniques such as X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). It is found that these nanowires are composed of CuO phase and the underlying film is of Cu{sub 2}O. A systematic study is carried out to find the possibilities for the transformation of one phase to another completely. A possible growth mechanism for the nanowires is also discussed.

  12. Characteristics of Left-Right Spiral Hollow Cylindrical Roller

    Institute of Scientific and Technical Information of China (English)

    Liming Lu; Qiping Chen; Yujiang Qin

    2015-01-01

    Based on new rolling⁃sliding compound bearings, the wear between the one⁃way spiral hollow cylindrical roller and the ribs of the inner and outer ring of rolling⁃sliding compound bearings is reduced by innovational structural design. A new left⁃right spiral hollow cylindrical roller is proposed to replace the one⁃way spiral hollow cylindrical roller. The finite element analysis models of ordinary cylindrical rollers, one⁃way spiral hollow cylindrical rollers and left⁃right spiral hollow cylindrical rollers are respectively established by ABAQUS. The axial displacement of their center mass and the stress distribution of left⁃right spiral hollow cylindrical rollers are compared and analyzed. Theoretical study results show that this new left⁃right spiral hollow cylindrical roller not only inherits the advantages of one⁃way spiral hollow cylindrical rollers, but also avoids the axial offset and the serious wear of the one⁃way spiral hollow cylindrical roller. And the theory research conclusion is verified by the experiment. The left⁃right spiral hollow cylindrical roller has the advantages to overcome boundary stress concentration like logarithmic convex roller. The rolling⁃sliding compound bearings equipped with the new rollers can be better to adapt to the impact of vibration load.

  13. Growth and characterisation of bulk Sr2CuO2Cl2 single crystals

    NARCIS (Netherlands)

    Hien, NT; Franse, JJM; Pothuizen, JJM; Li, TW; Menovsky, AA

    1997-01-01

    Large bulk single crystals of the Sr2CuO2Cl2 compound with dimensions of 15 x 6 x 4 mm(3) have been grown directly from the melt by the floating-zone method using a light-image furnace. The optimal growth conditions are found in a mixed atmosphere of 0.2 bar oxygen and 1.2 bar argon. Results of the

  14. Spontaneous ferromagnetic spin ordering at the surface of La$_2$CuO$_4$

    OpenAIRE

    2007-01-01

    Magnetic properties of high purity stoichiometric La$_2$CuO$_4$ nanoparticles are systematically investigated as a function of particle size. Ferromagnetic single-domain spin clusters are shown to spontaneously form at the surface of fine grains as well as paramagnetic defects. Hysteresis loops and thermomagnetic irreversibility are observed in a wide temperature range $5 - 350$ K with the remnant moment and coercivity gradually decreasing with increasing temperature. Possible origins of the ...

  15. Solid-State Thermal Decoposition Method for the Preparation of CuO Nanoparticles

    Directory of Open Access Journals (Sweden)

    A. Dehno Khalaji

    2012-12-01

    Full Text Available In this paper, CuO nanoparticles  have been synthesized via solid- state thermal decomposition using copper(II Schiff base complexes as new precursors at 600ºC under air atmosphere for 3 h. Surface morphology of the products were characterized by Fourier transform infrared spectroscopy (FT-IR, X-ray diffraction (XRD and scanning electron microscopy (SEM.

  16. The structure and energies of peroxy bipolarons in La sub 2 CuO sub 4

    CERN Document Server

    Catlow, C R A; Zhang, X

    1998-01-01

    We present calculations of the binding energies of peroxy (O sub 2 sup 2 sup -) bipolarons in La sub 2 CuO sub 4. Our results strongly suggest that these species are weakly bound with respect to isolated hole species. Estimates of the effective mass of the bipolaronic species based on our calculated relaxed geometries are consistent with experimental observation for the superconducting state of the material. (author). Letter-to-the-editor

  17. Fluctuating in the hopping rate of CuO thin films with respect to substrate temperature

    Science.gov (United States)

    Serin, N.; Yildiz, A.; Çam, E.; Uzun, Ş.; Serin, T.

    2012-10-01

    Electrical transport properties in CuO thin films processed using d.c. magnetron sputtering technique is investigated to understand the correlation between the processing conditions and electrical properties. It is identified that the temperature dependent conductivity of the investigated films is controlled by the multi-phonon hopping conduction mechanism. A detailed analysis in terms of carrier hopping parameters is used to correlate electrical transport properties with the d.c. magnetron sputtering conditions.

  18. Proximity-induced superconductivity in monolayer CuO2 on cuprate substrates

    Science.gov (United States)

    Zhu, Guo-Yi; Zhang, Fu-Chun; Zhang, Guang-Ming

    2016-11-01

    To understand the recently observed high temperature superconductivity in the monolayer CuO2 grown on the Bi2Sr2CaCu2O8 + δ substrates, we propose a two-band model of the hybridized oxygen px and py orbitals with the proximity effect of the substrate. We demonstrate that both the nodal and nodeless superconducting states can be induced by the proximity effect, depending on the strengths of the pairing parameters.

  19. Microwave absorption and resistively shunted Josephson junctions in high temperature CuO superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Ramachandran, J.S.; Huang, M.X.; Bhagat, S.M. (Dept. of Physics, Univ. of Maryland, College Park, MD (United States)); Kish, K.; Tyagi, S. (Dept. of Physics and Atmospheric Science, Drexel Univ., Philadelphia, PA (United States))

    1992-11-01

    We report that the field dependence of the magnetoabsorption (virgin curve) in all pristine granular CuO type (HTSC) superconductors follows a one-parameter expression. This ''universal'' result is combined with previous measurements on field and temperature dependences of microwave absorption in HTSC to demonstrate that a simple model based on resistively shunted Josehpson junctions is adequate to qualitatively account for almost all the observations on powders, pellets, thin films and single crystals. (orig.).

  20. Building Selectivity for NO Sensing in a NOx Mixture with Sonochemically Prepared CuO Structures

    Directory of Open Access Journals (Sweden)

    Max R. Mullen

    2015-12-01

    Full Text Available Several technologies are available for decreasing nitrogen oxide (NOx emissions from combustion sources, including selective catalytic reduction methods. In this process, ammonia reacts with nitric oxide (NO and nitrogen dioxide (NO2. As the stoichiometry of the two reactions is different, electrochemical sensor systems that can distinguish between NO and NO2 in a mixture of these two gases are of interest. Since NO and NO2 can be brought to equilibrium, depending on the temperature and the surfaces that they are in contact with, the detection of NO and NO2 independently is a difficult problem and has not been solved to date. In this study, we explore a high surface area sonochemically prepared CuO as the resistive sensing medium. CuO is a poor catalyst for NOx equilibration, and requires temperatures of 500 C to bring about equilibration. Thus, at 300 C, NO and NO2 retain their levels after interaction with CuO surface. In addition, NO adsorbs more strongly on the CuO over NO2. Using these two concepts, we can detect NO with minimal interference from NO2, if the latter gas concentration does not exceed 20% in a NOx mixture over a range of 100–800 ppm. Since this range constitutes most of the range of total NOx concentrations in diesel and other lean burn engines, this sensor should find application in selective detection of NO in this combustion application. A limitation of this sensor is the interference with CO, but with combustion in excess air, this problem should be alleviated.

  1. Photoelectrochemical Properties of CuO Grown by Using a Modified Chemical Bath Deposition Method

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Jin-wook; Ryu, Hyukhyun [Inje University, Gimhae (Korea, Republic of); Lee, Won-Jae [Dong-Eui University, Busan (Korea, Republic of)

    2016-06-15

    In this study, cupric oxide (CuO) nanorods were grown on the fluorine-doped tin oxide (FTO) glass substrate using a modified-chemical bath deposition (M-CBD) method. We investigated the morphology, structural, optical and photoelectrochemical properties of the cupric oxide nanorods with various growth durations by using field-emission scanning-electron microscopy (FE-SEM), X-ray diffraction (XRD), UV-visible spectroscopy (UV-vis) and three-electrode potentiostat, respectively. In this work, we found that the morphologies, thickness, growth rate, crystallinities, grain sizes and optical bandgap were controllable on the growth duration, which affected photocurrent density and photo-stability. The highest growth rate of CuO nanorods was 126 nm/min. From the XRD measurement, we also confirmed that (020) directional growth affected the growth of the CuO nanorods. A maximum photocurrent density of-1.88 mA/cm² at -0.55 V (vs. SCE) and high photo-stability value about 40% was obtained with 10 minutes growth duration.

  2. Spectral studies on CuO in sodium–calcium borophosphate glasses

    Indian Academy of Sciences (India)

    S SHAILAJHA; K GEETHA; P VASANTHARANI

    2016-08-01

    Transparent borophosphate glasses doped with CuO were prepared by melt quenching technique. X-ray diffraction (XRD), optical and luminescence properties of sodium–calcium borophosphate glasses doped with CuO have been studied. The XRD results showed the amorphous nature of the sample. The introduction of CuO was favourable for the colour changes from light blue to dark bluish green colour. Direct optical energy bandgaps before and after doping with different percents of copper oxide obtained in the range 4.81–2.99 eV indicated the role of copper in the glassy matrix by ultraviolet (UV) spectra. The glasses have more than 80% transparency for emission wavelength range, and strong absorption bands due to the charge transition of the Cu$^+$ and Cu$^{2+}$ ions were observed. The emission bands observed in the UV and blue regions are attributed to 3d$^9$4s–3d$^{10}$ triplet transition in Cu$^+$ ion.

  3. Synthesis and characterization of tenorite (CuO nanoparticles from smelting furnace dust(SFD

    Directory of Open Access Journals (Sweden)

    Darezereshki E.

    2013-01-01

    Full Text Available Tenorite (CuO nanoparticles were prepared from a dilute CuSO4 solution. The solution was obtained by leaching (pH=1.5 of smelting furnace dust of Sarcheshmeh Copper Complex, Iran. The recovery of copper from the acidic sulphate solution was carried out by solvent extraction using Lix 984-N. Tenorite nanoparticles were synthesized by direct thermal decomposition of Langite [Cu4(OH6SO4(H2O2] as a precursor which was calcinated in air for 2 h at 750°C. The Samples were characterized by X-ray diffraction, infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. The average diameter of the spherical pure CuO nanoparticles and their crystallite size were estimated to be 92 nm and 40nm, respectively. The simplicity of the present method suggests its potential application at industrial scale as a cheap and convenient way to produce pure CuO nanoparticles from dilute CuSO4 solutions obtained from leaching of smelting furnace dust.

  4. Heterojunction characteristics of ZnO and CuO substrates formed by direct bonding

    Energy Technology Data Exchange (ETDEWEB)

    Abe, Hiroshi; Fujishima, Masahide; Komiyama, Takao; Chonan, Yasunori; Yamaguchi, Hiroyuki; Aoyama, Takashi [Department of Electronics and Information Systems, Akita Prefectural University, Yuri-honjo, Akita 015-0055 (Japan)

    2012-06-15

    The n-ZnO/p-CuO heterojunction characteristics have been investigated by direct bonding of ZnO and CuO substrates at room temperatures, and by post-annealing at 800 C. The ZnO substrate was fabricated by mixing of ZnO and Al{sub 2}O{sub 3} (2%) powders, pressing at 50 MPa, and sintering at 1400 C while the CuO substrate was fabricated by mixing of CuO and Li{sub 2}CO{sub 3} (1%) powders, pressing at 300 MPa, and sintering at 700 C. Rectifying behaviour with an ideality factor of 126 was observed after bonding of these substrates. Post-annealing of the heterojunction, however, significantly increased both the forward and the reverse currents, and the rectifying behaviour was lost. Symmetrical I-V curves with threshold voltages of about {+-} 1 V were observed and this degradation could be explained by impurity (Al and Li) segregation at the junction interface. (copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  5. CuO and Co3O4 Nanoparticles: Synthesis, Characterizations, and Raman Spectroscopy

    Directory of Open Access Journals (Sweden)

    M. Rashad

    2013-01-01

    Full Text Available Copper oxide and cobalt oxide (CuO, Co3O4 nanocrystals (NCs have been successfully prepared in a short time using microwave irradiation without any postannealing treatment. Both kinds of nanocrystals (NCs have been prepared using copper nitrate and cobalt nitrate as the starting materials and distilled water as the solvent. The resulted powders of nanocrystals (NCs were characterized by X-ray diffraction (XRD, transmission electron microscopy (TEM, scanning electron microscopy (SEM, and atomic force microscopy (AFM measurements. The obtained results confirm the presence of the both of oxides nanopowders produced during chemical precipitation using microwave irradiation. A strong emission under UV excitation is obtained from the prepared CuO and Co3O4 nanoparticles. The results show that the nanoparticles have high dispersion and narrow size distribution. The line scans of atomic force microscopy (AFM images of the nanocrystals (NCs sprayed on GaAs substrates confirm the results of both X-ray diffraction and transmission electron microscopy. Furthermore, vibrational studies have been carried out using Raman spectroscopic technique. Specific Raman peaks have been observed in the CuO and Co3O4 nanostructures, and the full width at half maximum (FWHM of the peaks indicates a small particle size of the nanocrystals.

  6. Effect of Extracellular Polymeric Substances on CuO Nanoparticle Dissolution and Colloidal Stability

    Science.gov (United States)

    Adeleye, A. S.; Keller, A. A.

    2013-12-01

    Extracellular polymeric substances (EPS) are high molecular weight polymers produced by microorganisms growing in natural as well as artificial environments. EPS may interact with engineered nanomaterials (ENMs) in aquatic systems via electrostatic and/or hydrophobic associations, therefore, influencing the fate and transport of ENMs. In this study the effect of soluble EPS isolated from Isochrysis galbana, a marine phytoplankton, on the dissolution kinetics and colloidal stability of CuO nanoparticles was investigated. EPS was characterized by measuring hydrodynamic diameter, total organic carbon, carbohydrate, and protein concentrations. CuO nanoparticles were more stable in the presence of EPS in aqueous media as indicated by hydrodynamic size and average count rate measurements. The effect of pH and ionic strength on dissolution was also studied. [Cu2+] and [Cu]total detected after a week were 5.70 mg L-1 and 7.08 mg L-1 respectively when 10 mg L-1 CuO nanoparticles was kept in 10 mM NaCl at pH 4. In the presence of 5 mg-C EPS L-1, [Cu2+] and [Cu]total were slightly lower at 5.0 mg L-1 and 5.53 mg L-1 respectively. Although observed [Cu2+] and [Cu]total were significantly lower at neutral and alkaline pH conditions, a similar pattern was observed.

  7. Size-dependent antimicrobial properties of CuO nanoparticles against Gram-positive and -negative bacterial strains

    Directory of Open Access Journals (Sweden)

    Azam A

    2012-07-01

    Full Text Available Ameer Azam,1,2 Arham S Ahmed,2 M Oves,3 MS Khan,3 Adnan Memic11Center of Nanotechnology, King Abdulaziz University, Jeddah, Saudi Arabia; 2Center of Excellence in Materials Science (Nanomaterials, Department of Applied Physics, 3Department of Agricultural Microbiology, Aligarh Muslim University, Aligarh, IndiaBackground: CuO is one of the most important transition metal oxides due to its captivating properties. It is used in various technological applications such as high critical temperature superconductors, gas sensors, in photoconductive applications, and so on. Recently, it has been used as an antimicrobial agent against various bacterial species. Here we synthesized different sized CuO nanoparticles and explored the size-dependent antibacterial activity of each CuO nanoparticles preparation.Methods: CuO nanoparticles were synthesized using a gel combustion method. In this approach, cupric nitrate trihydrate and citric acid were dissolved in distilled water with a molar ratio of 1:1. The resulting solution was stirred at 100°C, until gel was formed. The gel was allowed to burn at 200°C to obtain amorphous powder, which was further annealed at different temperatures to obtain different size CuO nanoparticles. We then tested the antibacterial properties using well diffusion, minimum inhibitory concentration, and minimum bactericidal concentration methods.Results: XRD spectra confirmed the formation of single phase CuO nanoparticles. Crystallite size was found to increase with an increase in annealing temperature due to atomic diffusion. A minimum crystallite size of 20 nm was observed in the case of CuO nanoparticles annealed at 400°C. Transmission electron microscopy results corroborate well with XRD results. All CuO nanoparticles exhibited inhibitory effects against both Gram-positive and -negative bacteria. The size of the particles was correlated with its antibacterial activity.Conclusion: The antibacterial activity of CuO nanoparticles

  8. Hollow antiresonant fibers with reduced attenuation.

    Science.gov (United States)

    Belardi, Walter; Knight, Jonathan C

    2014-04-01

    An improved design for hollow antiresonant fibers (HAFs) is presented. It consists of adding extra antiresonant glass elements within the air cladding region of an antiresonant hollow-core fiber. We use numerical simulations to compare fiber structures with and without the additional cladding elements in the near- and mid-IR regimes. We show that realizable fiber structures can provide greatly improved performance in terms of leakage and bending losses compared to previously reported antiresonant fibers. At mid-IR wavelengths, the adoption of this novel fiber design will lead to HAFs with reduced bending losses. In the near-IR, this design could lead to the fabrication of HAFs with very low attenuation.

  9. Experimental evaluation of a hollow glass fiber.

    Science.gov (United States)

    Bornstein, A; Croitoru, N

    1986-02-01

    Very high interest in making a low-loss fiber for the infrared has been stimulated by important applications in optical communication, surgery, cutting, welding, and heat treatment. The leaky waveguide is one of the most promising types of future fiber in the infrared region where low-loss materials are not available or not suitable for making fibers (i.e., CO2 laser light lambda = 10.6 microm). In this paper a comparative model of a He-Ne laser beam and an oxide glass leaky hollow fiber for a CO2 laser light beam and a chalcogenide glass leaky hollow fiber are studied. Measurements of attenuation, dependence of output power on diameter and angle, and the angular dependence of output angle vs input angle were made. The experimental data were compared with theoretical calculations, and the critical value of the wall thickness for minimum attenuation is given.

  10. Space Charge Mitigation by Hollow Bunches

    CERN Multimedia

    Oeftiger, AO

    2014-01-01

    To satisfy the requirements of the HL-LHC (High Luminosity Large Hadron Collider), the LHC injector chain will need to supply a higher brightness, i.e. deliver the same transverse beam emittances \\epsilon_{x,y} while providing a higher intensity N. However, a larger number of particles per bunch enhances space charge effects. One approach to mitigate the impact of space charge is to change the longitudinal phase space distribution: hollow bunches feature a depleted bunch centre and a densely populated periphery. Thus, the spatial line density maximum is depressed which ultimately decreases the tune spread imposed by space charge. Therefore, a higher intensity can be accepted while keeping the same overall space charge tune shift. 3 different methods to create hollow bunches in the PSBooster are simulated.

  11. Surface functionalized hollow silica particles and composites

    KAUST Repository

    Rodionov, Valentin

    2017-05-26

    Composition comprising hollow spherical silica particles having outside particle walls and inside particle walls, wherein the particles have an average particle size of about 10 nm to about 500 nm and an average wall thickness of about 10 nm to about 50 nm; and wherein the particles are functionalized with at least one organic functional group on the outside particle wall, on the inside particle wall, or on both the outside and inside particle walls, wherein the organic functional group is in a reacted or unreacted form. The organic functional group can be epoxy. The particles can be mixed with polymer precursor or a polymer material such as epoxy to form a prepreg or a nanocomposite. Lightweight but strong materials can be formed. Low loadings of hollow particles can be used.

  12. Characterizing the elasticity of hollow metal nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Ji Changjiang; Park, Harold S [Department of Civil and Environmental Engineering, Vanderbilt University, Nashville, TN 37235 (United States)

    2007-03-21

    We have performed atomistic simulations on solid and hollow copper nanowires to quantify the elastic properties of hollow nanowires (nanoboxes). We analyse variations in the modulus, yield stress and strain for <100> and <110> nanoboxes by varying the amount of bulk material that is removed to create the nanoboxes. We find that, while <100> nanoboxes show no improvement in elastic properties as compared to solid <100>nanowires, <110> nanoboxes can show enhanced elastic properties as compared to solid <110> nanowires. The simulations reveal that the elastic properties of the nanoboxes are strongly dependent on the relative strength of the bulk material that has been removed, as well as the total surface area of the nanoboxes, and indicate the potential of ultralight, high-strength nanomaterials such as nanoboxes.

  13. Hollow Sucker Rod Applied in Production Engineering

    Institute of Scientific and Technical Information of China (English)

    Wang Tongbin; Liu Liandong; Hu Daoming; Jia Yanshan

    1997-01-01

    @@ Working Principle A positive cycle system or a working channel can be formed by means of hollow sucker rod and its mating parts in the oil tube ofa well, through which heat carriers (such as hot water,hot oil and steam), chemicals and heating cable can be pumped or put into the well so as to lower the viscosity of crude, dissolve the paraffin building-up and open the conduit, thus leading to the smooth oil flow out of well.

  14. Hollow Cone Spray Characterization and Integral Modeling

    OpenAIRE

    Bollweg, Peter

    2013-01-01

    The thesis presents a computationally efficient spray model for hollow cone sprays suitable for engine system simulation of direct injecting gasoline internal combustion engines. The model describes the transient evolution of the spray as a two-phase jet. Spatial gradients are resolved along the main injection direction. Momentum exchange, droplet heat-up, and fuel evaporation are accounted for. Diffusive transport of momentum, energy, and fuel species mass between the dense spray zone an...

  15. Chalcogenide glass hollow core microstructured optical fibers

    Science.gov (United States)

    Shiryaev, Vladimir S.

    2015-03-01

    The recent developments on chalcogenide glass hollow core microstructured optical fibers (HC-MOFs) are presented. The comparative analysis of simulated optical properties for chalcogenide HC-MOFs of negative-curvature with different size and number of capillaries is given. The technique for the manufacture of microstructured chalcogenide preforms, which includes the assembly of the substrate glass tube and 8-10 capillaries, is described. Further trends to improve the optical transmission in chalcogenide NCHCFs are considered.

  16. Hollow Cathode With Multiple Radial Orifices

    Science.gov (United States)

    Brophy, John R.

    1992-01-01

    Improved hollow cathode serving as source of electrons has multiple radial orifices instead of single axial orifice. Distributes ion current more smoothly, over larger area. Prototype of high-current cathodes for ion engines in spacecraft. On Earth, cathodes used in large-diameter ion sources for industrial processing of materials. Radial orientation of orifices in new design causes current to be dispersed radially in vicinity of cathode. Advantageous where desireable to produce plasma more nearly uniform over wider region around cathode.

  17. The Hollow Cathode Phase of Pseudospark Operation

    Science.gov (United States)

    1993-06-01

    THE HOLLOW CATHODE PHASE OF PSEUDOSPARK OPERATION L. Pitchford and J. P. Boeuf University Paul Sabatier, France V. Puech University De Paris-Sud...ORGANIZATION NAME(S) AND ADDRESS(ES) University Paul Sabatier, France 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME...Appl. Phys. 53, 1699 (1988). [9] A. Anders, S. Anders, and M. Gundersen, submitted to Phys. Rev. Lett. [10] J. P. Boeuf and L. Pitchford , IEEE

  18. Formation of hollow atoms above a surface

    Science.gov (United States)

    Briand, Jean Pierre; Phaneuf, Ronald; Terracol, Stephane; Xie, Zuqi

    2012-06-01

    Slow highly stripped ions approaching or penetrating surfaces are known to capture electrons into outer shells of the ions, leaving the innermost shells empty, and forming hollow atoms. Electron capture occurs above and below the surfaces. The existence of hollow atoms below surfaces e.g. Ar atoms whose K and L shells are empty, with all electrons lying in the M and N shells, was demonstrated in 1990 [1]. At nm above surfaces, the excited ions may not have enough time to decay before hitting the surfaces, and the formation of hollow atoms above surfaces has even been questioned [2]. To observe it, one must increase the time above the surface by decelerating the ions. We have for the first time decelerated O^7+ ions to energies as low as 1 eV/q, below the minimum energy gained by the ions due to the acceleration by their image charge. As expected, no ion backscattering (trampoline effect) above dielectric (Ge) was observed and at the lowest ion kinetic energies, most of the observed x-rays were found to be emitted by the ions after surface contact. [4pt] [1] J. P. Briand et al., Phys.Rev.Lett. 65(1990)159.[0pt] [2] J.P. Briand, AIP Conference Proceedings 215 (1990) 513.

  19. Space Charge MitigationWith Longitudinally Hollow Bunches

    CERN Document Server

    Oeftiger, Adrian; Rumolo, Giovanni; CERN. Geneva. ATS Department

    2016-01-01

    Suitably, hollow longitudinal phase space distributions have a flat profile and hence reduce the impact of transverse space charge. Dipolar parametric excitation with the phase loop feedback systems provides such hollow distributions under reproducible conditions. We present a procedure to create hollow bunches during the acceleration ramp of CERN’s PS Booster machine with minimal changes to the operational cycle. The improvements during the injection plateau of the downstream Proton Synchrotron are assessed in comparison to standard parabolic bunches.

  20. Interference Assembly and Fretting Wear Analysis of Hollow Shaft

    OpenAIRE

    Chuanjun Han; Jie Zhang

    2014-01-01

    Fretting damage phenomenon often appears in the interference fit assembly. The finite element model of hollow shaft and shaft sleeve was established, and the equivalent stress and contact stress were computed after interference assembly. The assembly body of hollow shaft and shaft sleeve was in whirling bending load, and the contact status (sticking, sliding, and opening) and the distribution of stress along one typical contact line were computed under different loads, interferences, hollow d...

  1. Preparation of Nanocrystalline MoS2 Hollow Spheres

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Nanocrystalline MoS2 with hollow spherical morphology has been prepared by the hydrothermal method. The products are characterized by means of X-ray powder diffraction, transmission electron microscopy and high-resolution transmission electron microscopy. The experimental results give the evidence that the sample is consists of hollow spheres 400~600 nm in diameter, and there is much whisker on the surface of MoS2 hollow sphere.

  2. Generation of a Dark Hollow Beam inside a Cavity

    Institute of Scientific and Technical Information of China (English)

    ZHANG Lei; LU Xuan-Hui; CHEN Xu-Min; HE Sai-Ling

    2004-01-01

    @@ A new method is introduced to generate a hollow beam inside a cavity. Using a matrix eigenvalue method, the laser resonator with optical diffraction elements is theoretically analysed and simulated. The hollow beam can be obtained theoretically by controlling the parameters of the diffraction functions. After designed the diffraction components in the cavity, a hollow beam of good quality is realized experimentally using a YAG solid state laser.

  3. Optical properties of hollow calcium aluminate glass waveguides.

    Science.gov (United States)

    Abel, T; Harrington, J A; Foy, P R

    1994-06-20

    Calcium aluminate glass has a refractive index less than 1 at 10.6 µ, and therefore it is a good candidate for a hollow fiber for the transmission of CO(2) laser energy. We have drawn hollow calcium aluminate glass fibers with inner diameters ranging from 380 to 500 µ. The loss for our 500-µm inner-diameter hollow glass fibers measured at 10.6 µm is 8.6 dB/m.

  4. Review of Synthetic Methods to Form Hollow Polymer Nanocapsules

    Energy Technology Data Exchange (ETDEWEB)

    Barker, Madeline T. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-03-13

    Syntactic foams have grown in interest due to the widened range of applications because of their mechanical strength and high damage tolerance. In the past, hollow glass or ceramic particles were used to create the pores. This paper reviews literature focused on the controlled synthesis of hollow polymer spheres with diameters ranging from 100 –200 nm. By using hollow polymer spheres, syntactic foams could reach ultra-low densities.

  5. Silica hollow spheres with nano-macroholes like diatomaceous earth.

    Science.gov (United States)

    Fujiwara, Masahiro; Shiokawa, Kumi; Sakakura, Ikuko; Nakahara, Yoshiko

    2006-12-01

    Artificial synthesis of hollow cell walls of diatoms is an ultimate target of nanomaterial science. The addition of some water-soluble polymers such as sodium polymethacrylate to a solution of water/oil/water emulsion system, which is an essential step of the simple synthetic procedure of silica hollow spheres (microcapsules), led to the formation of silica hollow spheres with nano-macroholes (>100 nm) in their shell walls, the morphologies of which are analogous to those of diatom earth.

  6. Complex Hollow Nanostructures: Synthesis and Energy-Related Applications.

    Science.gov (United States)

    Yu, Le; Hu, Han; Wu, Hao Bin; Lou, Xiong Wen David

    2017-04-01

    Hollow nanostructures offer promising potential for advanced energy storage and conversion applications. In the past decade, considerable research efforts have been devoted to the design and synthesis of hollow nanostructures with high complexity by manipulating their geometric morphology, chemical composition, and building block and interior architecture to boost their electrochemical performance, fulfilling the increasing global demand for renewable and sustainable energy sources. In this Review, we present a comprehensive overview of the synthesis and energy-related applications of complex hollow nanostructures. After a brief classification, the design and synthesis of complex hollow nanostructures are described in detail, which include hierarchical hollow spheres, hierarchical tubular structures, hollow polyhedra, and multi-shelled hollow structures, as well as their hybrids with nanocarbon materials. Thereafter, we discuss their niche applications as electrode materials for lithium-ion batteries and hybrid supercapacitors, sulfur hosts for lithium-sulfur batteries, and electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions. The potential superiorities of complex hollow nanostructures for these applications are particularly highlighted. Finally, we conclude this Review with urgent challenges and further research directions of complex hollow nanostructures for energy-related applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Manufacturing hollow obturator with resilient denture liner on post hemimaxillectomy

    Directory of Open Access Journals (Sweden)

    Michael Josef Kridanto Kamadjaja

    2006-03-01

    Full Text Available A resilient denture liner is placed in the part of the hollow obturator base that contacts to post hemimaxillectomy mucosa. Replacing the resilient denture liner can makes the hollow obturator has an intimate contact with the mucosa, so it can prevents the mouth liquid enter to the cavum nasi and sinus, also eliminates painful because of using the hollow obturator. Resilient denture liner is a soft and resilient material that applied to the fitting surface of a denture in order to allow a more distribution of load. A case was reported about using the hollow obturator with resilient denture liner on post hemimaxillectomy to overcome these problems.

  8. Evidence of fire resistance of hollow-core slabs

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl; Sørensen, Lars Schiøtt; Giuliani, Luisa

    Hollow-core slabs have during the past 50 years comprised a variety of different structures with different cross-sections and reinforcement. At present the extruded hollow-core slabs without cross-reinforcement in the bottom flange and usually round or oval longitudinal channels (holes) are predo......Hollow-core slabs have during the past 50 years comprised a variety of different structures with different cross-sections and reinforcement. At present the extruded hollow-core slabs without cross-reinforcement in the bottom flange and usually round or oval longitudinal channels (holes...

  9. Flexible 3D porous CuO nanowire arrays for enzymeless glucose sensing: in situ engineered versus ex situ piled

    Science.gov (United States)

    Huang, Jianfei; Zhu, Yihua; Yang, Xiaoling; Chen, Wei; Zhou, Ying; Li, Chunzhong

    2014-12-01

    Convenient determination of glucose in a sensitive, reliable and cost-effective way has aroused sustained research passion, bringing along assiduous investigation of high-performance electroactive nanomaterials to build enzymeless sensors. In addition to the intrinsic electrocatalytic capability of the sensing materials, electrode architecture at the microscale is also crucial for fully enhancing the performance. In this work, free-standing porous CuO nanowire (NW) was taken as a model sensing material to illustrate this point, where an in situ formed 3D CuO nanowire array (NWA) and CuO nanowires pile (NWP) immobilized with polymer binder by conventional drop-casting technique were both studied for enzymeless glucose sensing. The NWA electrode exhibited greatly promoted electrochemistry characterized by decreased overpotential for electro-oxidation of glucose and over 5-fold higher sensitivity compared to the NWP counterpart, benefiting from the binder-free nanoarray structure. Besides, its sensing performance was also satisfying in terms of rapidness, selectivity and durability. Further, the CuO NWA was utilized to fabricate a flexible sensor which showed excellent performance stability against mechanical bending. Thanks to its favorable electrode architecture, the CuO NWA is believed to offer opportunities for building high-efficiency flexible electrochemical devices.Convenient determination of glucose in a sensitive, reliable and cost-effective way has aroused sustained research passion, bringing along assiduous investigation of high-performance electroactive nanomaterials to build enzymeless sensors. In addition to the intrinsic electrocatalytic capability of the sensing materials, electrode architecture at the microscale is also crucial for fully enhancing the performance. In this work, free-standing porous CuO nanowire (NW) was taken as a model sensing material to illustrate this point, where an in situ formed 3D CuO nanowire array (NWA) and CuO nanowires

  10. Improved photocatalytic activity of ZnO coupled CuO nanocomposites synthesized by reflux condensation method

    Energy Technology Data Exchange (ETDEWEB)

    Mageshwari, K. [Department of Electronic Engineering, Hanyang University, Seoul (Korea, Republic of); PG and Research Department of Physics, Kongunadu Arts and Science College, Coimbatore 641 029, Tamil Nadu (India); Nataraj, D. [Department of Physics, Bharathiar University, Coimbatore 641 046 (India); Pal, Tarasankar [Department of Chemistry, Indian Institute of Technology, Kharagpur 721 302 (India); Sathyamoorthy, R., E-mail: rsathya59@gmail.com [PG and Research Department of Physics, Kongunadu Arts and Science College, Coimbatore 641 029, Tamil Nadu (India); Park, Jinsub, E-mail: jinsubpark@hanyang.ac.kr [Department of Electronic Engineering, Hanyang University, Seoul (Korea, Republic of)

    2015-03-15

    Highlights: • CuO–ZnO nanocomposites were synthesized by reflux condensation method. • Photodegradation of methyl orange and methylene blue dyes was investigated. • Morphological studies show 3D flower-like CuO microspheres adorned with ZnO nanorods. • Optical analysis showed characteristic absorption bands of CuO and ZnO. • CuO–ZnO nanocomposites exhibited superior photocatalytic activity than CuO. - Abstract: Nanostructured CuO–ZnO nanocomposites were successfully synthesized for different Zn{sup 2+} concentrations by reflux condensation method without using any surfactant, and their photocatalytic activity was evaluated using methyl orange and methylene blue dyes under UV light irradiation. XRD revealed the formation of CuO–ZnO nanocomposites, composing of monoclinic CuO and hexagonal ZnO. XPS analysis revealed that CuO–ZnO nanocomposites are made up of Cu(II), Zn(II) and O. FESEM and TEM images showed that pure CuO exhibit 3D flower-like microstructure, while the CuO–ZnO nanocomposites prepared for different Zn{sup 2+} concentrations have 3D flower-like CuO, microstructure adorned with rod-like ZnO particles. UV–Vis DRS showed absorption bands corresponding to CuO and ZnO around 960 nm and 395 nm, respectively. PL spectra of CuO–ZnO nanocomposites exhibited reduced PL emissions compared to pure CuO, indicating the low recombination rate of photogenerated electrons and holes. Photodegradation assay revealed that catalytic activity of CuO–ZnO nanocomposites increased with Zn{sup 2+} concentration, and also effectively degrade methyl orange and methylene blue dyes when compared to pure CuO. The enhanced photocatalytic activity of CuO–ZnO nanocomposites were mainly ascribed to the reduced recombination and efficient separation of photogenerated charge carriers. The possible mechanism for the improved photocatalytic activity of CuO–ZnO nanocomposites was proposed.

  11. Solid state green synthesis and catalytic activity of CuO nanorods in thermal decomposition of potassium periodate

    Science.gov (United States)

    Patel, Vinay Kumar; Bhattacharya, Shantanu

    2017-09-01

    The present study reports a facile solid state green synthesis process using the leaf extracts of Hibiscus rosa-sinensis to synthesize CuO nanorods with average diameters of 15–20 nm and lengths up to 100 nm. The as-synthesized CuO nanorods were characterized by x-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy and selected area electron diffraction. The formation mechanism of CuO nanorods has been explained by involving the individual role of amide I (amino groups) and carboxylate groups under excess hydroxyl ions released from NaOH. The catalytic activity of CuO nanorods in thermal decomposition of potassium periodate microparticles (µ-KIO4) microparticles was studied by thermo gravimetric analysis measurement. The original size (~100 µm) of commercially procured potassium periodate was reduced to microscale length scale to about one-tenth by PEG200 assisted emulsion process. The CuO nanorods prepared by solid state green route were found to catalyze the thermal decomposition of µ-KIO4 with a reduction of 18 °C in the final thermal decomposition temperature of potassium periodate.

  12. Effect of CuO addition on structure and electrical properties of low temperature sintered quaternary piezoelectric ceramics

    Indian Academy of Sciences (India)

    Jianhua Li

    2013-10-01

    The ceramics were prepared successfully by CuO additions to Pb[(Mn1/3Sb2/3)0.06(Ni1/2W1/2)0.02-(Zr0.49Ti0.51)0.92]O3. Effect of the addition on sintering temperature, structure and electrical properties of ceramics was investigated. The piezoelectric ceramics was prepared by solid-state reaction. Sintering experiments were accomplished at temperature between 950 and 1100 °C added 0.3–1.0 wt% CuO. The sintering temperature was reduced from 1250 °C (without CuO additions) to 970 °C when CuO-doped. The ceramics sintered at 970 °C for 2 h with 0.7 wt% CuO exhibited r = 1845, tan = 0.15%, 33 = 395 pC/N, p = 0.58 and m = 1830, which were the highest values. With increasing CuO doping, c becomes lower. Jahn–Teller effect was used to explain the contraction of -axis and simultaneous extension of -axis in the lattice.

  13. Structural studies of Nd$_{1.85}$Ce$_{0.15}$CuO$_{4}$ $+$ Ag superconducting system

    Indian Academy of Sciences (India)

    N RADHIKESH RAVEENDRAN; A K SINHA; R RAJARAMAN; M PREMILA; E P AMALADASS; K VINOD; J JANAKI; S KALAVATHI; AWADHESH MANI

    2016-06-01

    We have studied for the first time the effect of Ag addition (0–15 wt%) to the superconducting system, Nd$_{1.85}$Ce$_{0.15}$CuO$_{4}$, on its crystal structure and local structural features, using synchrotron X-ray diffraction(SXRD) and Raman spectroscopy, respectively. SXRD and subsequent Rietveld refinement studies on powders of Nd$_{1.85}$Ce$_{0.15}$CuO$_4$ $+$ Ag system indicate a small but significant change in lattice parameter upon Ag addition, showing evidence for possible incorporation of Ag to the extent of $\\sim$1 wt%. Raman spectroscopic studies indicate that the parent structure of Nd$_{1.85}$Ce$_{0.15}CuO$_{4}$ remains unaffected with no major local structural changes on doping with silver. However, all Raman modes show minor phonon hardening upon Ag addition, which is consistent with the unit cell volume reduction as is observed in XRD. A systematic bleaching out of the apical oxygen defect mode was also observed with increased Ag addition. Polarized Raman measurements helped to identify the asymmetric nature of the B1g Raman mode. X-ray diffraction studies on pellets of Nd$_{1.85}$Ce$_{0.15}CuO$_4$ $+$ Ag system further indicate a randomization of preferred orientation upon Ag addition. The superconductivity of the Nd$_{1.85}$Ce$_{0.15}$CuO$_4$ $+$ Ag system has been well characterized for all the compositions studied.

  14. Onion-like carbon coated CuO nanocapsules: A highly reversible anode material for lithium ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xianguo, E-mail: liuxianguohugh@gmail.com [Anhui Key Laboratory of Metal Materials and Processing, School of Materials Science and Engineering, Anhui University of Technology, Maanshan 243002 (China); Bi, Nannan; Feng, Chao [Anhui Key Laboratory of Metal Materials and Processing, School of Materials Science and Engineering, Anhui University of Technology, Maanshan 243002 (China); Or, Siu Wing [Department of Electrical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon (Hong Kong); Sun, Yuping [Center for Engineering practice and Innovation Education, Anhui University of Technology, Maanshan 243002 (China); Jin, Chuangui; Li, Weihuo; Xiao, Feng [Anhui Key Laboratory of Metal Materials and Processing, School of Materials Science and Engineering, Anhui University of Technology, Maanshan 243002 (China)

    2014-02-25

    Highlights: • Onion-like carbon–coated CuO nanocapsules have been synthesized. • Onion-like carbon leads to the improved stability and electric conductivity. • CuO/C nanocapsules maintain a reversible capacity of 628.7 mA h g{sup −1} after 50 cycles. -- Abstract: The synthesis and characterization of CuO/C nanocapsules for application as anode material in lithium ion batteries are reported. Introduction of onion-like carbon shell on the CuO nanoparticles leads to the improved stability, electric conductivity and electrochemical performance. When evaluated as potential anode materials for lithium-ion batteries, the novel CuO/C nanocapsules deliver an initial discharge capacity of 1043.9 mA h g{sup −1} at 100 mA g{sup −1} and maintain a high reversible capacity of 628.7 mA h g{sup −1} after 50 charge–discharge cycles, much higher than those of the CuO nanoparticles. A postmortem analysis of the CuO and CuO/C anodes subjected to prolonged cycling reveals the existence of a lower degree of surface cracking and particle breakage in the CuO/C anode than the CuO anode.

  15. Morphology-controllable synthesis of CuO nanostructures and their catalytic activity for the reduction of 4-nitrophenol

    Science.gov (United States)

    Che, Wei; Ni, Yonghong; Zhang, Yuxing; Ma, Yue

    2015-02-01

    The investigation on the correlation between properties and shapes of nanomaterials always draws increased interest. However, the correlation between properties and shapes of CuO nanostructures was rarely reported in the previous works. The shape-controlled preparation of CuO nanostructures was successfully realized in the present work via a simple oil-bath route in air at 170 °;C for 30 min, employing CuCl2•2H2O and NaOH as the reactants. It was found that CuO nanocrystals with leaf-like, dumbbell-like and flowerlike structures were obtained through introducing various additives. At the same time, the correlation between properties and shapes was investigated. It was found that the catalytic performances of the as-prepared CuO nanostructures for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in NaBH4 aqueous solution were dependent on its morphologies. Experiments showed that the first-order rate constants for CuO nanostructures with various shapes were in turn 35.5‧ 10-3 s-1 (leaf-like nanosheets), 4.77‧ 10-3 s-1 (dumbbell-like architectures), 10.6‧ 10-3 s-1 (flowerlike nanostructures). The present research provides a new catalyst selection for the reduction of 4-NP to 4-AP in excess NaBH4 aqueous solution, which has potential application in industrial production.

  16. Free-standing CuO nanoflake arrays coated Cu foam for advanced lithium ion battery anodes

    Science.gov (United States)

    Yang, Wanfeng; Wang, Jiawei; Ma, Wensheng; Dong, Chaoqun; Cheng, Guanhua; Zhang, Zhonghua

    2016-11-01

    For lithium ion batteries (LIBs), low electronic conductivity of CuO leads to rapid capacity decay and poor structural stability. Herein, we successfully fabricate three-dimensional CuO nanoflake arrays coated Cu foam by facile and efficient electrochemical oxidation. When being applied as anode material for LIBs, the CuO electrodes deliver stable reversible capacities of 523.9 mA h g-1 at 0.5 A g-1, 376.1 mA h g-1 at 1.0 A g-1 and 322.7 mA h g-1 at 2.0 A g-1 with high coulombic efficiency (>99%) after 100 cycles. A long cycle life of up to 400 cycles at 2.0 A g-1 is also achieved with the retention capacity of 193.5 mA h g-1. Moreover, the electrode exhibits excellent rate capability and can regain its original capacities as reversing to the low current densities. Noticeably, on-line differential electrochemical mass spectrometry and in situ Raman measurements confirm the formation of solid electrolyte interface film and the conversion mechanism for the CuO electrodes, respectively. The superior lithium storage performance can be attributed to the favorable nanoflake structures with high surface area and the perfect electrical contact between CuO and Cu substrate.

  17. Magnetic-Field-Induced Soft-Mode Quantum Phase Transition in the High-Temperature Superconductor La1.855Sr0.145CuO4

    DEFF Research Database (Denmark)

    Chang, J.; Christensen, Niels Bech; Niedermayer, C.

    2009-01-01

    Inelastic neutron-scattering experiments on the high-temperature superconductor La1.855Sr0.145CuO4 reveal a magnetic excitation gap Delta that decreases continuously upon application of a magnetic field perpendicular to the CuO2 planes. The gap vanishes at the critical field required to induce long...

  18. Morphology and gas sensing characteristics of density-controlled CuO nanostructures obtained by varying the oxygen partial pressure during growth

    Science.gov (United States)

    Lee, Dongjin; Jin, Changhyun; Noh, Youngwook; Park, Seokhyun; Choi, Sun-Woo

    2016-07-01

    By exerting different O2 partial pressures (0, 20, 40, and 60 sccm) onto copper substrates, we discovered that the growth parameter, namely, the O2 flow rate, affects the degree of nucleation, diameter, length, and crystalline quality of CuO nanowires (NWs). Scanning electron microscopy (SEM), X-ray diffraction (XRD), and transmission electron microscopy (TEM) were used to analyze the evolution of the morphological and the microstructural changes in the CuO nanostructures. The formation of a Cu2O interlayer between the Cu and the CuO layers could be adjusted by controlling more precisely the O2 flow rate. In addition, the reducing (H2S) and the oxidizing (O2, NO2, and SO2) gas sensing performances of these O2-assisted CuO NWs were compared with those of CuO NWs grown in static air. The response to the reducing H2S of the sensors based on CuO NWs grown using O2 at 40 sccm showed a higher electrical change and faster response and recovery times than the sensors based on CuO NWs grown using lower O2 flow rates, including the ones grown in static air and/or used for sensing oxidizing gases (O2, NO2, and SO2) did. On the basis of their growth and their gas-sensing applications, the possible mechanisms characteristic of the density-controlled CuO NWs grown using various O2 partial pressures are discussed.

  19. Long-term effects of cupric oxide nanoparticles (CuO NPs) on the performance, microbial community and enzymatic activity of activated sludge in a sequencing batch reactor.

    Science.gov (United States)

    Wang, Sen; Li, Zhiwei; Gao, Mengchun; She, Zonglian; Ma, Bingrui; Guo, Liang; Zheng, Dong; Zhao, Yangguo; Jin, Chunji; Wang, Xuejiao; Gao, Feng

    2017-02-01

    The long-term effects of cupric oxide nanoparticles (CuO NPs) on the performance, microbial activity and microbial community of activated sludge were investigated in a sequencing batch reactor (SBR). The SBR performance had no evident change at 0-10 mg/L CuO NPs, whereas the CuO NPs concentration at 30-60 mg/L affected the COD, NH4(+)-N and soluble orthophosphate (SOP) removal, nitrogen and phosphorus removal rate and microbial enzymatic activity of activated sludge. Some CuO NPs might be absorbed on the surface of activated sludge or penetrate the microbial cytomembrane into the microbial cell interior of activated sludge. Compared to 0 mg/L CuO NPs, the reactive oxygen species (ROS) production and lactate dehydrogenase (LDH) release increased by 43.6% and 56.4% at 60 mg/L CuO NPs, respectively. The variations of ROS production and LDH release demonstrated that CuO NPs could induce the toxicity towards the microorganisms and destroy the integrity of microbial cytomembrane in the activated sludge. High throughput sequencing of 16S rDNA indicated that CuO NPs could evidently impact on the microbial richness, diversity and composition of activated sludge in the SBR.

  20. Field-induced interplanar magnetic correlations in the high-temperature superconductor La1.88Sr0.12CuO4

    DEFF Research Database (Denmark)

    Rømer, A. T.; Jensen, P.; Jacobsen, H.

    2015-01-01

    We present neutron-scattering studies of the interplanar magnetic correlations in the high-temperature superconductor La1.88Sr0.12CuO4 (Tc=27 K). The correlations are studied both in a magnetic field applied perpendicular to the CuO2 planes, and in zero field under different cooling conditions. We...

  1. Evolution of CuO poly-crystalline layers to coherent single-crystalline dots on ZnO nanorods upon annealing

    Science.gov (United States)

    Wang, Ruey-Chi; Hou, Yuan-Ru; Chen, Yi-Wen

    2017-02-01

    ZnO/CuO p-n heterojunctions have attracted much attention for device applications, but coherent junctions, which are crucial for controlling electrical properties, still remain a challenge due to different crystal structure. In this work, CuO single-crystalline dots are coherently synthesized on ZnO nanorods by using a proposed two-step process. Transmission electron microscopy images confirm the formation of CuO coherent dots on single-crystalline ZnO nanorods upon annealing the nanorods covered with a poly-crystalline CuxO layer. The coherent dots exhibit two types of epitaxial orientations: CuO [002] ǀǀ ZnO [ 10 1 bar 1 ], CuO [111] ǀǀ ZnO [0002], and CuO [002] ǀǀ ZnO [ 10 1 bar 1 bar ], CuO [111] ǀǀ ZnO [ 000 2 bar]. As the thickness of the as-deposited CuxO layer increases from 10 to 30 nm, the aspect ratio of the resulting CuO dots decreases from 0.43 to 0.21, approaching a film-like morphology. This work provides a route to prepare CuO coherent single-crystalline structures on ZnO, which is one step further toward fabricating excellent CuO/ZnO nanodevices.

  2. Microwave-assisted template-free synthesis of butterfly-like CuO through Cu2Cl(OH)3 precursor and the electrochemical sensing property

    Science.gov (United States)

    Xie, Hanjie; Zhu, Lianjie; Zheng, Wenjun; Zhang, Jing; Gao, Fubo; Wang, Yan

    2016-11-01

    An energy-efficient and environmentally friendly microwave-assisted method was adopted for synthesis of butterfly-like CuO assembled by nanosheets through a Cu2Cl(OH)3 precursor, using no template. Formation mechanism of the butterfly-like CuO was explored and discussed systematically for the first time on the basis of both experimental results and crystal structure transformations in atomic level. The electrochemical sensing properties of the butterfly-like CuO modified electrode to ascorbic acid (AA) were studied for the first time. The results reveal that Cu(OH)2 nanowires were formed once the Cu2+ ions, located in between two CuO4 parallelogram chains of a Cu2Cl(OH)3 precursor, dissolve into the solution as Cu(OH)42- complex ions after ion exchange reactions and simultaneous assemble along a axis. Upon microwave irradiation, the adjacent CuO4 parallelogram chains of the Cu(OH)2 nanowires dehydrate and assemble along c axis, forming CuO nanosheets with (002) as the main exposed facet, which were further assembled to butterfly-like CuO under the action of microwave field, suggesting that microwave field functions like a 'directing agent'. The butterfly-like CuO modified electrode shows good electrochemical sensing properties to AA with a low detecting limit, short response time and wide linear response range.

  3. Experimental study of enhanced heat transfer by addition of CuO nanoparticle

    Science.gov (United States)

    Jesumathy, Stella; Udayakumar, M.; Suresh, S.

    2012-06-01

    An energy storage system has been designed to study the thermal characteristics of paraffin wax with an embedded nano size copper oxide (CuO) particle. This paper presents studies conducted on phase transition times, heat fraction as well as heat transfer characteristics of paraffin wax as phase change material (PCM) embedded with CuO nanoparticles. 40 nm mean size CuO particles of 2, 5 and 10% by weight were dispersed in PCM for this study. Experiments were performed on a heat exchanger with 1.5-10 l/min of heat transfer fluid (HTF) flow. Time-based variations of the temperature distributions are revealed from the results of observations of melting and solidification curves. The results strongly suggested that the thermal conductivity enhances 6, 6.7 and 7.8% in liquid state and in dynamic viscosity it enhances by 5, 14 and 30% with increasing mass fraction of the CNEPs. The thermal conductivity ratio of the composites can be augmented by a factor up to 1.3. The heat transfer coefficient during solidification increased about 78% for the maximum flow rate. The analysis of experimental results reveals that the addition of copper oxide nanoparticles to the paraffin wax enhances both the conduction and natural convection very effectively in composites and in paraffin wax. The paraffin wax-based composites have great potential for energy storage applications like industrial waste heat recovery, solar thermal applications and solar based dynamic space power generation with optimal fraction of copper oxide nanoparticles.

  4. Optical and other spectroscopic studies of lead, zinc bismuth borate glasses doped with CuO

    Science.gov (United States)

    Rajyasree, Ch.; Vinaya Teja, P. Michael; Murthy, K. V. R.; Krishna Rao, D.

    2011-12-01

    10MO·20Bi2O3·(70-x)B2O3·xCuO [M=Pb, Zn] with x=0, 0.4 and 0.8 (wt%) glasses were synthesized by the melt-quenching technique and were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. Physical parameters, like density, and spectroscopic studies (optical absorption, EPR, FTIR and photoluminescence) were used to understand the role of modifier oxide and CuO in the glass matrix. A red shift of the absorption band corresponds to 2B1g→2B2g transition of Cu2+ ions from P2 to Z4 samples and the increase of hyperfine splitting factor (A‖) from P2 to Z2 shows that with the integration of PbO by ZnO the electron density around copper ion is increased. It is also supported by the gradual increase in theoretical optical basicity values of ZnO mixed glasses, as compared to that of PbO mixed glass matrix. Reduced bismuth radicals are found in undoped and 0.4% CuO doped glasses of both the series. Analysis of the absorption and emission studies indicates that the concentration of luminescence centers of bismuth ions (Bi3+ ions in UV region) is decreased by the integration of ZnO as well as by increasing the dopant concentration. In lead series PbO4 and BiO3 units are increased from P2 to P4 and in zinc series BiO3 units are decreased from Z0 to Z4. The conductivity of the glass matrices is increased in both the series with the dopant of CuO.

  5. Fabrication of Closed Hollow Bulb Obturator Using Thermoplastic Resin Material

    Directory of Open Access Journals (Sweden)

    Bidhan Shrestha

    2015-01-01

    Full Text Available Purpose. Closed hollow bulb obturators are used for the rehabilitation of postmaxillectomy patients. However, the time consuming process, complexity of fabrication, water leakage, and discoloration are notable disadvantages of this technique. This paper describes a clinical report of fabricating closed hollow bulb obturator using a single flask and one time processing method for an acquired maxillary defect. Hard thermoplastic resin sheet has been used for the fabrication of hollow bulb part of the obturator. Method. After fabrication of master cast conventionally, bulb and lid part of the defect were formed separately and joined by autopolymerizing acrylic resin to form one sized smaller hollow body. During packing procedure, the defect area was loaded with heat polymerizing acrylic resin and then previously fabricated smaller hollow body was adapted over it. The whole area was then loaded with heat cure acrylic. Further processes were carried out conventionally. Conclusion. This technique uses single flask which reduces laboratory time and makes the procedure simple. The thickness of hollow bulb can be controlled and light weight closed hollow bulb prosthesis can be fabricated. It also minimizes the disadvantages of closed hollow bulb obturator such as water leakage, bacterial infection, and discoloration.

  6. Porous-wall hollow glass microspheres as carriers for biomolecules

    Science.gov (United States)

    Li, Shuyi; Dynan, William S; Wicks, George; Serkiz, Steven

    2013-09-17

    The present invention includes compositions of porous-wall hollow glass microspheres and one or more biomolecules, wherein the one or more biomolecules are positioned within a void location within the hollow glass microsphere, and the use of such compositions for the diagnostic and/or therapeutic delivery of biomolecules.

  7. Preparation of spherical hollow alumina particles by thermal plasma

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Wonkyung [Department of Chemical Engineering, INHA University, 253 Yonghyun-dong, Nam-gu, Incheon 402‐751 (Korea, Republic of); Regional Innovation Center for Environmental Technology of Thermal Plasma (RIC-ETTP), INHA University, 253 Yonghyun-dong, Nam-gu, Incheon 402‐751 (Korea, Republic of); Choi, Sooseok [Center for Advance Research in Fusion Reactor Engineering, Seoul National University, 599 Gwanak-ro, Gwanak-gu, Seoul 151‐742 (Korea, Republic of); Oh, Seung-Min [Daejoo Electronic Materials Co., 1236‐10 Jeongwang-dong, Siheung-si, Kyunggi-do 429‐848 (Korea, Republic of); Park, Dong-Wha, E-mail: dwpark@inha.ac.kr [Department of Chemical Engineering, INHA University, 253 Yonghyun-dong, Nam-gu, Incheon 402‐751 (Korea, Republic of); Regional Innovation Center for Environmental Technology of Thermal Plasma (RIC-ETTP), INHA University, 253 Yonghyun-dong, Nam-gu, Incheon 402‐751 (Korea, Republic of)

    2013-02-01

    Spherical hollow particles were prepared from solid alumina powders using DC arc thermal plasma, and then spray coating was performed with the as-prepared particles. Operating variables for the hollow particle preparation process were additional plasma gas, input power, and carrier gas flow rate. The spherical hollow alumina particles were produced in the case of using additive gas of H{sub 2} or N{sub 2}, while alumina surface was hardly molten in the pure argon thermal plasma. In addition, the hollow particles were well produced in high power and low carrier gas conditions due to high melting point of alumina. Hollow structure was confirmed by focused ion beam-scanning electron microscopy analysis. Morphology and size distribution of the prepared particles that were examined by field emission-scanning electron microscopy and phase composition of the particles was characterized by X-ray diffraction. In the spray coating process, the as-prepared hollow particles showed higher deposition rate. - Highlights: ► Spherical hollow alumina powder was prepared by non-transferred DC arc plasma. ► Diatomic gasses were added in Ar plasma for high power. ► Prepared hollow alumina powder was efficient for the plasma spray coating.

  8. Fabrication of Closed Hollow Bulb Obturator Using Thermoplastic Resin Material.

    Science.gov (United States)

    Shrestha, Bidhan; Hughes, E Richard; Kumar Singh, Raj; Suwal, Pramita; Parajuli, Prakash Kumar; Shrestha, Pragya; Sharma, Arati; Adhikari, Galav

    2015-01-01

    Purpose. Closed hollow bulb obturators are used for the rehabilitation of postmaxillectomy patients. However, the time consuming process, complexity of fabrication, water leakage, and discoloration are notable disadvantages of this technique. This paper describes a clinical report of fabricating closed hollow bulb obturator using a single flask and one time processing method for an acquired maxillary defect. Hard thermoplastic resin sheet has been used for the fabrication of hollow bulb part of the obturator. Method. After fabrication of master cast conventionally, bulb and lid part of the defect were formed separately and joined by autopolymerizing acrylic resin to form one sized smaller hollow body. During packing procedure, the defect area was loaded with heat polymerizing acrylic resin and then previously fabricated smaller hollow body was adapted over it. The whole area was then loaded with heat cure acrylic. Further processes were carried out conventionally. Conclusion. This technique uses single flask which reduces laboratory time and makes the procedure simple. The thickness of hollow bulb can be controlled and light weight closed hollow bulb prosthesis can be fabricated. It also minimizes the disadvantages of closed hollow bulb obturator such as water leakage, bacterial infection, and discoloration.

  9. Photoluminescence of hollow gold-silver bimetallic nanoparticles

    OpenAIRE

    Weon-Sik Chae; Hee-Ok Lee; Seung-Lim Oh

    2011-01-01

    Hollow gold nanoparticles including silver were prepared by the galvanic replacement reaction of silver nanoparticles by gold. The resulting hollow gold-silver bimetallic nanoparticles show notable blue-green emissions, which are studied using steady-state and time-resolved spectroscopy.

  10. Wet spinning of asymmetric hollow fibre membranes for gas separation

    NARCIS (Netherlands)

    Hof, van 't Jacob Adriaan

    1988-01-01

    This thesis describes the spinning and characterizatin of hollow fibre membranes for gas separation. The type of fibres studied here are made by a wet spinning process. A homogeneous solution is prepared, consisting of a polymer in a suitable organic solvent, and extruded as a hollow fibre. Both the

  11. Wet spinning of asymmetric hollow fibre membranes for gas separation

    NARCIS (Netherlands)

    van 't Hof, Jacob Adriaan

    1988-01-01

    This thesis describes the spinning and characterizatin of hollow fibre membranes for gas separation. The type of fibres studied here are made by a wet spinning process. A homogeneous solution is prepared, consisting of a polymer in a suitable organic solvent, and extruded as a hollow fibre. Both the

  12. Simple Spinning of Heterogeneous Hollow Microfibers on Chip.

    Science.gov (United States)

    Yu, Yue; Wei, Wenbo; Wang, Yaqing; Xu, Cong; Guo, Yaqiong; Qin, Jianhua

    2016-08-01

    A novel and simple chip-based microfluidic strategy is proposed for continuously controlled spinning of desirable hollow microfibers. These fabricated fiber-shaped materials exhibit extraordinary morphological and structural complexity, as well as a heterogeneous composition. The resulting specific hollow microfibers have potential applications in numerous chemical and biomedical fields.

  13. Photoluminescence of hollow gold-silver bimetallic nanoparticles

    Directory of Open Access Journals (Sweden)

    Weon-Sik Chae

    2011-12-01

    Full Text Available Hollow gold nanoparticles including silver were prepared by the galvanic replacement reaction of silver nanoparticles by gold. The resulting hollow gold-silver bimetallic nanoparticles show notable blue-green emissions, which are studied using steady-state and time-resolved spectroscopy.

  14. Biodegradable hollow fibres for the controlled release of hormones

    NARCIS (Netherlands)

    Eenink, M.J.D.; Feijen, Jan; Olijslager, J.; Albers, J.H.M.; Rieke, J.C.; Greidanus, P.J.

    1987-01-01

    Poly(l-lactide), (PLLA), hollow fibres were prepared using a dry-wet phase inversion spinning process. The effect of several spinning parameters (i.e. bore medium flow rate, spinning dope extrusion rate, fibre take-up rate, and spinning height) on the hollow fibre dimensions is reported. The use of

  15. Biodegradable hollow fibres for the controlled release of hormones

    NARCIS (Netherlands)

    Eenink, M.J.D.; Feijen, J.; Olijslager, J.; Albers, J.H.M.; Rieke, J.C.; Greidanus, P.J.

    1987-01-01

    Poly(l-lactide), (PLLA), hollow fibres were prepared using a dry-wet phase inversion spinning process. The effect of several spinning parameters (i.e. bore medium flow rate, spinning dope extrusion rate, fibre take-up rate, and spinning height) on the hollow fibre dimensions is reported. The use of

  16. Tailoring oxides of copper-Cu{sub 2}O and CuO nanoparticles and evaluation of organic dyes degradation

    Energy Technology Data Exchange (ETDEWEB)

    Raghav, Ragini; Aggarwal, Priyanka; Srivastava, Sudha, E-mail: sudha.srivastava@jiit.ac.in [Department of Biotechnology, Jaypee Institute of Information Technology, A-10, Sector-62, Noida-201307,Uttar Pradesh (India)

    2016-04-13

    We report a simple one-pot colloidal synthesis strategy tailoring cuprous or cupric nano-oxides in pure state. NaOH provided alkaline conditions (pH 12.5 -13) for nano-oxides formation, while its concentration regulated the oxidation state of the nano-oxides. The morphological, structural and optical properties of synthesized Cu{sub 2}O and CuO nanoparticles were studied by transmission electron microscopy (TEM), X-Ray diffraction (XRD) and UV-vis spectroscopy. Dye degradation capability of CuO and Cu2O nanoparticles was evaluated using four organic dyes - Malachite green, Methylene blue, Methyl orange and Methyl red. The results demonstrate effective degradation of all four dyes employing with almost comparable activity both Cu{sub 2}O and CuO nanoparticles.

  17. Tailoring oxides of copper-Cu2O and CuO nanoparticles and evaluation of organic dyes degradation

    Science.gov (United States)

    Raghav, Ragini; Aggarwal, Priyanka; Srivastava, Sudha

    2016-04-01

    We report a simple one-pot colloidal synthesis strategy tailoring cuprous or cupric nano-oxides in pure state. NaOH provided alkaline conditions (pH 12.5 -13) for nano-oxides formation, while its concentration regulated the oxidation state of the nano-oxides. The morphological, structural and optical properties of synthesized Cu2O and CuO nanoparticles were studied by transmission electron microscopy (TEM), X-Ray diffraction (XRD) and UV-vis spectroscopy. Dye degradation capability of CuO and Cu2O nanoparticles was evaluated using four organic dyes - Malachite green, Methylene blue, Methyl orange and Methyl red. The results demonstrate effective degradation of all four dyes employing with almost comparable activity both Cu2O and CuO nanoparticles.

  18. Synthesis and microwave modification of CuO nanoparticles: crystallinity and morphological variations, catalysis, and gas sensing.

    Science.gov (United States)

    Yang, Chao; Xiao, Feng; Wang, Jide; Su, Xintai

    2014-12-01

    CuO nanoparticles with different morphologies were synthesized by chemical precipitation and subsequently modified by microwave hydrothermal processing. The nanoparticles were precipitated by the introduction of a strong base to an aqueous solution of copper cations in the presence/absence of the polyethylene glycol and urea additives. The modification of the nanoparticles was subsequently carried out by a microwave hydrothermal treatment of suspensions of the precipitates, precipitated with and without the additives. X-ray powder diffraction analysis indicated that the crystallinity and crystallite size of the CuO nanoparticles increased after the microwave hydrothermal modification. Microscopy observations revealed the morphology changes induced by microwave hydrothermal processing. The thermal decomposition of ammonium perchlorate and the detection of volatile gases were performed to evaluate the catalytic and gas sensing properties of the synthesized CuO nanoparticles.

  19. Building energetic material from novel salix leaf-like CuO and nano-Al through electrophoretic deposition

    Energy Technology Data Exchange (ETDEWEB)

    Yin, Yan Jun; Li, Xueming [College of Chemistry and Chemical Engineering, Chongqing University, Chongqing (China)

    2016-11-15

    In this study, an energetic material was prepared by depositing nano-Al on CuO arrays via electrophoretic deposition (EPD), which offers a feasible route for nano-Al integration. The morphology and structure of the CuO arrays and Al/CuO composites were characterized by scanning electron microscopy and X-ray diffraction. The CuO arrays were homogenously salix leaf-like structure with a width of ⁓150 to 200 nm. The energy density of Al/CuO composites was approximate to 1454.5 J/g by integrating the differential scanning calorimetry (DSC) plot and the combustion performance was recorded by a high-speed camera. Moreover, the combustion flames were violent and the whole reaction process only lasted 72.2 ms, indicating that the energy of the Al/CuO nanothermite can be released effectively.

  20. Temperature dependence of the electronic structure of La2CuO4 in the multielectron LDA+GTB approach

    Science.gov (United States)

    Makarov, I. A.; Ovchinnikov, S. G.

    2015-09-01

    The band structure of La2CuO4 in antiferromagnetic and paramagnetic phases is calculated at finite temperatures by the multielectron LDA+GTB method. The temperature dependence of the band spectrum and the spectral weight of Hubbard fermions is caused by a change in the occupation numbers of local multielectron spin-split terms in the antiferromagnetic phase. A decrease in the magnetization of the sublattice with temperature gives rise to new bands near the bottom of the conduction band and the top of the valence band. It is shown that the band gap decreases with increasing temperature, but La2CuO4 remains an insulator in the paramagnetic phase as well. These results are consistent with measurements of the red shift of the absorption edge in La2CuO4 with increasing temperature.

  1. Effect of nano CuO on the ionic conductivity of PVC-PEG blend polymer electrolytes

    Science.gov (United States)

    Ravindran, Dhandapani; Vickraman, Palanichamy

    2013-06-01

    Nano CuO was prepared by co-precipitation method and it was incorporated as filler in PVC-PEG blend based solid polymer electrolytes with lithium perchlorate (LiClO4) as salt. The PVC: CuO ratio was systematically varied in order to study its effect on the ionic conductivity behavior of electrolyte membranes. The membranes were subjected to XRD and impedance analysis. The analysis shows that the conductivity profile was strongly influenced by the PVC: CuO ratio. The membrane with PVC/CuO: PEG: PC: LiClO4=23/2:15:50:10 exhibits higher conductivity of 4.0×10-6 S/cm at room temperature.

  2. Characterization of CuO Species and Thermal Solid-Solid Interaction in CuO/CeO2-Al2O3 Catalyst by In-Situ XRD, Raman Spectroscopy and TPR

    Institute of Scientific and Technical Information of China (English)

    He Mai; Luo Mengfei; Fang Ping

    2006-01-01

    Transference of CuO species and thermal solid-solid interaction in CuO/CeO2-Al2O3 catalyst prepared by an impregnation method were characterized by in-situ XRD, Raman spectroscopy and H2-TPR techniques.For the catalyst calcined at 300 ℃, two kinds of CuO species coexist on the surface, that is, highly dispersed and bulk CuO crystalline phase.Four kinds of CuO species are present for the catalyst calcined at 600 ℃: (1) highly dispersed CuO, (2) bulk CuO on the surface, (3) bulk CuO in the internal layer of CeO2, and (4) CuAl2O4 formed from CuO-Al2O3 interaction.For the catalyst calcined at 800 ℃, besides very little highly dispersed and bulk CuO on the surface, most of the CuO has transferred into the internal layer of CeO2 and the mass of CuAl2O4 are increased.At 900 ℃, all of CuO has diffused into the internal layer of CeO2 and formed CuAl2O4.The results show that the distribution of CuO species in the catalysts depends on the calcination temperature;the different CuO species can be effectively confirmed by in-situ XRD, Raman spectroscopy and H2-TPR techniques.

  3. Electrochemical oxygen intercalation in La 2CuO 4 prepared by nitrates method: Microstructural effects

    Science.gov (United States)

    Michel, C. R.; Casan˜-Pastor, N.

    2000-11-01

    In order to determine microstructural effects in the electrochemical oxygen intercalation for La 2CuO 4, and the relative abundance of the two superconducting phases (T c = 33 and 44K), this oxide was prepared using the nitrates method, which involves the dissolution of La and Cu oxides in nitric acid. The product was pressed as pellets. A narrow grain size distribution and a density higher than 95% ϱ T was obtained. After electrochemical oxygen intercalation, at room temperature, this material gave a main superconducting phase with T c = 33K, whereas porous pellets obtaiined from the same oxide, with intermediate grinding, gave a T c = 44K.

  4. Spontaneous ferromagnetic spin ordering at the surface of La2CuO4

    Science.gov (United States)

    Yusupov, R. V.; Kabanov, V. V.; Mihailovic, D.; Conder, K.; Müller, K. A.; Keller, H.

    2007-07-01

    Magnetic properties of high purity stoichiometric La2CuO4 nanoparticles are systematically investigated as a function of particle size. Ferromagnetic single-domain spin clusters are shown to spontaneously form at the surface of fine grains as well as paramagnetic defects. Hysteresis loops and thermomagnetic irreversibility are observed in a wide temperature range 5-350K with the remnant moment and coercivity gradually decreasing with increasing temperature. Possible origins of the spontaneous surface ferromagnetic clusters and the relation of our data to the appearance of unusual magnetic phenomena and phase separation of doped cuprates are discussed.

  5. Dielectric constant of multiferroic pure and doped CuO nanoparticles

    Science.gov (United States)

    Apostolov, A. T.; Apostolova, I. N.; Wesselinowa, J. M.

    2014-08-01

    Within a microscopic model and a Green's function technique we have calculated the temperature and magnetic field dependence of the dielectric function ɛ(T,H) in CuO nanoparticles (NPs) taking into account frustration, single-ion anisotropy, s-d coupling, spin-phonon interaction and linear magnetoelectric coupling. ɛ(T) shows weak and broad anomalies at the two magnetic phase transition temperatures TN 2 and TN 1 due to the magnetoelectric coupling. ɛ(H) decreases with increasing of H and the kinks disappear. The changes of ɛ with ion doping are discussed. Comparisons to experimental data are made.

  6. Hall effect studies of Bi 2Sr 2CuO x crystals

    Science.gov (United States)

    Hou, X. H.; Li, J. W.; Zhang, J. L.; Guo, S. Q.; Yin, B.; Xiong, J. W.; Dong, C.; Zhao, Z. X.

    1994-12-01

    We have investigated the temperature dependencies of the in-plane resistivity and the Hall coefficient in Bi 2Sr 2CuO x crystals across the metal-insulator (MI) transition. In the insulator crystal at low temperature (32Kconduction is governed by a two-dimensional variable-range-hopping mechanism. In the superconducting crystal the Hall coefficient Rh exhibit a characteristic maximum at about 90 K, and after MI transition the maximum disappeared. We believe that the maximum in Rh-T curve represents the common feature of all the high Tc superconductors.

  7. Hopping conduction in In-doped CuO thin films

    Science.gov (United States)

    Yildiz, A.; Horzum, Ş.; Serin, N.; Serin, T.

    2014-11-01

    Electrical transport properties of undoped and In-doped CuO thin films (1, 5 and 10 at. %) are investigated by mean of resistivity in the temperature range of 115-300 K. Electrical transport mechanism of films is explained on the basis of the variable-range hopping (VRH) conduction. Upon doping, appreciable changes are found in resistivity. Temperature dependent resistivity shows a complex correlation with increasing In concentration. This situation is well explained by fluctuations in the hopping distance and the density of states at the Fermi level.

  8. Synthesis of Cu3N from CuO and NaNH2

    Directory of Open Access Journals (Sweden)

    Akira Miura

    2014-12-01

    Full Text Available We report on the low-temperature synthesis of submicron-sized Cu3N powder produced from CuO and NaNH2 powder mixture by heating at 150–190 °C in a Teflon-sealed autoclave. The structure was the anti-RuO3 type with a lattice parameter of 0.3814(1 nm, and strong optical absorption was observed below ∼1.9 eV. This synthesis method has the potential of facile control of the reaction with less use of ammonia sources.

  9. A Class of Effective of Decarboxylative Perfluoroalkylating Reagents: [(phen)2Cu](O2CRF)

    KAUST Repository

    Huang, Yangjie

    2016-04-13

    This article describes the invention of a class of effective reagents [(phen)2Cu](O2CRF) (1) for the decarboxylative perfluoroalkylation of aryl and heteroaryl halides. Treatment of the copper tert-butyloxide with phenanthroline ligands, with subsequent addition of perfluorocarboxylic acids afforded the air-stable copper(I) perfluorocarboxylato complexes 1. These complexes reacted with a variety of aryl and heteroaryl halides to form perfluoroalkyl(hetero)arenes in moderate to high yields. Computational studies suggested that the coordination of the second phen ligand may reduce the energy barrier for the decarboxylation of perfluorocarboxylate to facilitate the perfluoroalkylation.

  10. Effect of CuO Doping on the Electrical Behavior of ZrO2

    Institute of Scientific and Technical Information of China (English)

    SABA,Beg; SARITA; POOJA,Varshney

    2007-01-01

    Electrical conductivity has been measured at different temperatures for ZrO2 doped with various molar ratios of CuO. The conductivity increases due to migration of vacancies, created by doping. The conductivity was found to increase with increase in temperature till 220 ℃ and thereafter decrease due to collapse of the fluorite framework.A second rise in conductivity around 500 ℃ was observed due to phase transition of ZrO2. X-ray powder diffraction, DTA and IR studies were carried out for confirming doping effect and phase transition in ZrO2.

  11. NATURAL FREQUENCIES OF SUBMERGED PIEZOCERAMIC HOLLOW SPHERES

    Institute of Scientific and Technical Information of China (English)

    Cai Jinbiao; Chen Weiqiu; Ye Guiru; Ding Haojiang

    2000-01-01

    An exact 3D analysis of free vibration of a piezoceramic hollow sphere submerged in a compressible fluid is presented in this paper.A separation method is adopted to simplify the basic equations for spherically isotropic piezoelasticity.It is shown that there are two independent classes of vibration.The first one is independent of the fluid medium as well as the electric field,while the second is associated with both the fluid parameter and the piezoelectric effect.Exact frequency equations are derived and numerical results are obtained.

  12. Hollow micro string based calorimeter device

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to a micron-scale calorimeter and a calorimetry method utilizing the micron-scale calorimeter. In accordance with the invention, there is provided a micron-scale calorimeter comprising a micro-channel string, being restrained at at least two longitudinally distanced...... positions so as to form a free released double clamped string in-between said two longitudinally distanced positions said micro-channel string comprising a microfluidic channel having a closed cross section and extending in the longitudinal direction of the hollow string, acoustical means adapted...

  13. Nonlinear sequential laminates reproducing hollow sphere assemblages

    Science.gov (United States)

    Idiart, Martín I.

    2007-07-01

    A special class of nonlinear porous materials with isotropic 'sequentially laminated' microstructures is found to reproduce exactly the hydrostatic behavior of 'hollow sphere assemblages'. It is then argued that this result supports the conjecture that Gurson's approximate criterion for plastic porous materials, and its viscoplastic extension of Leblond et al. (1994), may actually yield rigorous upper bounds for the hydrostatic flow stress of porous materials containing an isotropic, but otherwise arbitrary, distribution of porosity. To cite this article: M.I. Idiart, C. R. Mecanique 335 (2007).

  14. Anti-resonant hexagram hollow core fibers.

    Science.gov (United States)

    Hayes, John R; Poletti, Francesco; Abokhamis, Mousavi S; Wheeler, Natalie V; Baddela, Naveen K; Richardson, David J

    2015-01-26

    Various simple anti-resonant, single cladding layer, hollow core fiber structures are examined. We show that the spacing between core and jacket glass and the shape of the support struts can be used to optimize confinement loss. We demonstrate the detrimental effect on confinement loss of thick nodes at the strut intersections and present a fabricated hexagram fiber that mitigates this effect in both straight and bent condition by presenting thin and radially elongated nodes. This fiber has loss comparable to published results for a first generation, multi-cladding ring, Kagome fiber with negative core curvature and has tolerable bend loss for many practical applications.

  15. Hollow-Cathode Source Generates Plasma

    Science.gov (United States)

    Deininger, W. D.; Aston, G.; Pless, L. C.

    1989-01-01

    Device generates argon, krypton, or xenon plasma via thermionic emission and electrical discharge within hollow cathode and ejects plasma into surrounding vacuum. Goes from cold start up to full operation in less than 5 s after initial application of power. Exposed to moist air between operations without significant degradation of starting and running characteristics. Plasma generated by electrical discharge in cathode barrel sustained and aided by thermionic emission from emitter tube. Emitter tube does not depend on rare-earth oxides, making it vulnerable to contamination by exposure to atmosphere. Device modified for use as source of plasma in laboratory experiments or industrial processes.

  16. Hollow ballistic pendulum for plasma momentum measurements

    Science.gov (United States)

    Goncharov, S. F.; Pashinin, P. P.; Perov, V. Y.; Serov, R. V.; Yanovsky, V. P.

    1988-05-01

    A novel pendulum design—hollow ballistic pendulum—is suggested for plasma momentum measurements. It has an advantage over the pendula used earlier in laser plasma experiments of being insensitive to a momentum of matter evaporated and scattered by the pendulum wall exposed to the plasma, which usually exceeds plasma momentum to be measured. Simple expressions describing pendulum performance are derived, and requirements of shape and size are established. Using this kind of pendulum in experiments on laser acceleration of thin foils made it possible to measure the momentum of accelerated foil with an accuracy of about 10%.

  17. Complete transformation of ZnO and CuO nanoparticles in culture medium and lymphocyte cells during toxicity testing.

    Science.gov (United States)

    Ivask, Angela; Scheckel, Kirk G; Kapruwan, Pankaj; Stone, Vicki; Yin, Hong; Voelcker, Nicolas H; Lombi, Enzo

    2017-03-01

    Here, we present evidence on complete transformation of ZnO and CuO nanoparticles, which are among the most heavily studied metal oxide particles, during 24 h in vitro toxicological testing with human T-lymphocytes. Synchrotron radiation-based X-ray absorption near edge structure (XANES) spectroscopy results revealed that Zn speciation profiles of 30 nm and 80 nm ZnO nanoparticles, and ZnSO4- exposed cells were almost identical with the prevailing species being Zn-cysteine. This suggests that ZnO nanoparticles are rapidly transformed during a standard in vitro toxicological assay, and are sequestered intracellularly, analogously to soluble Zn. Complete transformation of ZnO in the test conditions was further supported by almost identical Zn spectra in medium to which ZnO nanoparticles or ZnSO4 was added. Likewise, Cu XANES spectra for CuO and CuSO4-exposed cells and cell culture media were similar. These results together with our observation on similar toxicological profiles of ZnO and soluble Zn, and CuO and soluble Cu, underline the importance of dissolution and subsequent transformation of ZnO and CuO nanoparticles during toxicological testing and provide evidence that the nano-specific effect of ZnO and CuO nanoparticles is negligible in this system. We strongly suggest to account for this aspect when interpreting the toxicological results of ZnO and CuO nanoparticles.

  18. Electrochemical synthesis of multi-armed CuO nanoparticles and their remarkable bactericidal potential against waterborne bacteria

    Energy Technology Data Exchange (ETDEWEB)

    Pandey, Pratibha, E-mail: rkpratibha@yahoo.com; Merwyn, S.; Agarwal, G. S.; Tripathi, B. K.; Pant, S. C. [Defence Research and Development Establishment (India)

    2012-01-15

    Copper (II) oxide multi-armed nanoparticles composed of 500-1000 nm long radiating nanospicules with 100-200 nm width near the base and 50-100 nm width at the tapered ends and {approx}25 nm thickness were synthesized by electrochemical deposition in the presence of an oxidant followed by calcination at 150 Degree-Sign C. The nanoparticles were characterized using SEM/EDX for morphology and composition, Raman spectroscopy for compound identification, and broth culture method for antibacterial efficacy. The CuO nanoparticles have shown remarkable bactericidal efficacy against Gram-positive and -negative waterborne disease causing bacteria like Escherichia coli, Salmonella typhi, staphylococcus aureus and Bacillus subtilis. E. coli has been chosen as representative species for waterborne disease causing bacteria. In antibacterial tests 500 {mu}g/mL nano CuO killed 3 Multiplication-Sign 10{sup 8} CFU/mL E. coli bacteria within 4 h of exposure. Moreover, 8.3 Multiplication-Sign 10{sup 6} CFU/mL E. coli were killed by 100 and 10 {mu}g/mL nano CuO within 15 min and 4 h of exposure, respectively. Antibacterial activity of nano CuO has been found many-fold compared with commercial bulk CuO. The fate of nanoparticles after antibacterial test has also been studied. The synthesized CuO nanoparticles are expected to have potential antibacterial applications in water purification and in paints and coatings used on frequently touched surfaces and fabrics in hospital settings.

  19. Embalagem a vácuo: efeito no escurecimento e endurecimento do feijão durante o armazenamento

    Directory of Open Access Journals (Sweden)

    Rafaella Araújo Zambaldi Lima

    2014-09-01

    Full Text Available A influência do uso de embalagem a vácuo no controle do escurecimento e endurecimento do tegumento foi avaliada em feijões da cv. 'Pérola'. Os feijões após secos foram submetidos a diferentes embalagens: polietileno seladas a vácuo (espessura de 80µm, polietileno seladas sem vácuo (espessura de 80µm e embalagem comercial (espessura de 20µm, armazenados por oito meses em condições ambiente. Foram realizadas análises de umidade, tempo de cozimento, cor, atividade enzimática e compostos fenólicos, logo após a secagem e em intervalos de dois meses até o oitavo mês. O tempo de cozimento foi maior para os grãos acondicionados em embalagem comercial do que nas outras embalagens, ao final do armazenamento. Os grãos embalados em sacos de polietileno selados a vácuo apresentaram menor queda nos valores de L*. As amostras da embalagem selada a vácuo apresentaram atividade da Peroxidase e Polifenoloxidase inferior aos grãos da embalagem comercial. O teor de fenólicos totais não apresentou diferença significativa. O uso da embalagem selada a vácuo foi eficiente em retardar o aumento no tempo de cozimento, o escurecimento do tegumento, a atividade das enzimas Polifenoloxidase e Peroxidase da cultivar 'Pérola', durante o armazenamento por oito meses em condição ambiente.

  20. Synthesis, Characterization, and Sunlight Mediated Photocatalytic Activity of CuO Coated ZnO for the Removal of Nitrophenols.

    Science.gov (United States)

    Qamar, M Tariq; Aslam, M; Ismail, Iqbal M I; Salah, Numan; Hameed, A

    2015-04-29

    CuO@ZnO core-shell catalysts, coated by varying the CuO layer density ranging from 0.5% to 10%, were synthesized with the aim to enhance the photocatalytic activity of ZnO in sunlight and control its photocorrosion. Initially, the Cu(2+) ions were impregnated on presynthesized ZnO by wet impregnation and finally converted to CuO layers by calcination. The optical and structural characterization of the synthesized powders was performed by DRS, PL, Raman spectroscopy, and XRD analysis, respectively. The homogeneity of the coated layers was explored by FESEM. The photocatalytic activity of CuO coated ZnO was investigated for the degradation of mononitrophenols (2-, 3-, and 4-nitrophenol) and dinitrophenols (2,4-, 2,5-, and 2,6-dinitrophenol) in the exposure of the complete spectrum and visible region (420-800 nm) of sunlight. The effect of the increasing density coated layers of CuO on photocatalytic activity was evaluated for the degradation of 4-NP. Compared to pristine ZnO, a substantial increase in the degradation/mineralization ability was observable for the catalysts coated with 0.5% and 1% CuO, whereas a detrimental effect was noticed for higher coating density. Prior to photocatalytic studies, as evaluated by cyclic voltammetry (CV), compared to pure ZnO, a significant suppression of photocorrosion was noticed, under illumination, for catalysts coated with lower CuO coating. The progress of the photocatalytic degradation process was monitored by HPLC while the mineralization ability of the synthesized catalysts was estimated by TOC. The estimation of the released ions and their further interaction with the excited states and the reactive oxygen was monitored by ion chromatography (IC).

  1. Chemical bond properties and Mossbauer spectroscopy in (La1-xMx)2CuO4 (M=Ba, Sr)

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    By using the average band-gap model, the chemical bond properties of (La1-x Mx)2CuO4(M=Ba, Sr) were calculated . The calculated covalencies for Cu(O and La(O bond in the compounds are 0.3 and 0.03 respectively. M?ssbauer isomer shifts of 57Fe doped in La2CuO4 and 119Sn doped in La2CuO4 were calculated by using the chemical surrounding factor defined by covalency and electronic polarizability. Four valence state tin and three valence iron sites were identified in 57Fe and 119Sn doped La2CuO4.

  2. PREPARATION OF HOLLOW LATEX PARTICLES BY ALKALI-ACID TREATMENT

    Institute of Scientific and Technical Information of China (English)

    郝冬梅; 王新灵; 朱卫华; 唐小真; 刘成岑; 施凯

    2001-01-01

    Hollow polymer latex particles were prepared by seeded emulsion polymerization. A seed latex consisting of styrene (St), butyl acrylate(BA) copolymer was first prepared, and seeded terpolymerization of St-BA-MA(methacrylic acid) were then carried out in the absence of surfactant. Final latex was treated by a two-step treatment under alkaline and acidic conditions, thus, the particles with hollow structure were obtained. We discussed the effects of pH value, temperature and time in alkali and acid treatment processes on hollow structure within the polymer latex particles and amount of carboxylic group on particle surface. The results show that the hollow polymer latex particles with the largest hollow size can be obtained under a certain condition (pH12.5, 90°C, 3 h in alkali treatment stage and pH2.5, 85°C, 3 h in acid treatment stage).

  3. Anomalous Hollow Electron Beams in a Storage Ring

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Y.K.

    2005-04-12

    This paper reports the first observations of an anomalous hollow electron beam in the Duke storage ring. Created by exciting the single bunch beam in a lattice with a negative chromaticity, the hollow beam consists of a solid core inside and a large ring outside. We report the detailed measurements of the hollow beam phenomenon, including its distinct image pattern, spectrum signature, and its evolution with time. By capturing the post-instability bursting beam, the hollow beam is a unique model system for studying the transverse instabilities, in particular, the interplay of the wake field and the lattice nonlinearity. In addition, the hollow beam can be used as a powerful tool to study the linear and nonlinear particle dynamics in the storage ring.

  4. Size-dependent deformation mechanisms in hollow silicon nanoparticles

    Directory of Open Access Journals (Sweden)

    L. Yang

    2015-07-01

    Full Text Available Even inherently brittle hollow silicon nanoparticles (NPs can withstand larger strain to failure than solid NPs. However, the influence of wall thickness on the mechanical behavior of hollow Si NPs is not fully understood. Using molecular dynamics simulations, we investigate the compressive behavior of hollow Si NPs. Three distinct failure mechanisms of hollow NPs are uncovered, and their strength and deformability are analyzed quantitatively. For extra-thick-walled NPs, dislocations will nucleate below the contact area and cut through the particles till failure. For mid-thick-walled NPs, however, dislocations will emit from the inner surface and slip towards the outer surface. For thin-walled NPs, elastic buckling is the cause of failure. Compared to solid NPs, hollow NPs with wall thickness being around half of its outer radius can achieve significant improvement in both strength and deformability.

  5. Hollow fiber bioreactor technology for tissue engineering applications.

    Science.gov (United States)

    Eghbali, Hadis; Nava, Michele M; Mohebbi-Kalhori, Davod; Raimondi, Manuela T

    2016-01-01

    Hollow fiber bioreactors are the focus of scientific research aiming to mimic physiological vascular networks and engineer organs and tissues in vitro. The reason for this lies in the interesting features of this bioreactor type, including excellent mass transport properties. Indeed, hollow fiber bioreactors allow limitations to be overcome in nutrient transport by diffusion, which is often an obstacle to engineer sizable constructs in vitro. This work reviews the existing literature relevant to hollow fiber bioreactors in organ and tissue engineering applications. To this purpose, we first classify the hollow fiber bioreactors into 2 categories: cylindrical and rectangular. For each category, we summarize their main applications both at the tissue and at the organ level, focusing on experimental models and computational studies as predictive tools for designing innovative, dynamic culture systems. Finally, we discuss future perspectives on hollow fiber bioreactors as in vitro models for tissue and organ engineering applications.

  6. Self-templated chemically stable hollow spherical covalent organic framework

    Science.gov (United States)

    Kandambeth, Sharath; Venkatesh, V.; Shinde, Digambar B.; Kumari, Sushma; Halder, Arjun; Verma, Sandeep; Banerjee, Rahul

    2015-04-01

    Covalent organic frameworks are a family of crystalline porous materials with promising applications. Although active research on the design and synthesis of covalent organic frameworks has been ongoing for almost a decade, the mechanisms of formation of covalent organic frameworks crystallites remain poorly understood. Here we report the synthesis of a hollow spherical covalent organic framework with mesoporous walls in a single-step template-free method. A detailed time-dependent study of hollow sphere formation reveals that an inside-out Ostwald ripening process is responsible for the hollow sphere formation. The synthesized covalent organic framework hollow spheres are highly porous (surface area ~1,500 m2 g-1), crystalline and chemically stable, due to the presence of strong intramolecular hydrogen bonding. These mesoporous hollow sphere covalent organic frameworks are used for a trypsin immobilization study, which shows an uptake of 15.5 μmol g-1 of trypsin.

  7. An Atomic Lens Using a Focusing Hollow Beam

    Institute of Scientific and Technical Information of China (English)

    夏勇; 印建平; 王育竹

    2003-01-01

    We propose a new method to generate a focused hollow laser beam by using an azimuthally distributed 2π-phase plate and a convergent thin lens, and calculate the intensity distribution of the focused hollow beam in free propagation space. The relationship between the waist w0 of the incident collimated Gaussian beam and the dark spot size of the focused hollow beam at the focal point, and the relationship between the focal length f of the thin lens and the dark spot size are studied respectively. The optical potential of the blue-detuned focused hollow beam for 85Rb atoms is calculated. Our study shows that when the larger waist w of the incident Gaussian beam and the shorter focal length f of the lens are chosen, we can obtain an extremely small dark spot size of the focused hollow beam, which can be used to form an atomic lens with a resolution of several angstroms.

  8. Monitoring a CuO gas sensor at work: an advanced in situ X-ray absorption spectroscopy study.

    Science.gov (United States)

    Volanti, D P; Felix, A A; Suman, P H; Longo, E; Varela, J A; Orlandi, M O

    2015-07-28

    X-ray absorption near edge structure (XANES) and electrical measurements were used to elucidate the local structure and electronic changes of copper(II) oxide (CuO) nanostructures under working conditions. For this purpose, a sample holder layout was developed enabling the simultaneous analysis of the spectroscopic and electrical properties of the sensor material under identical operating conditions. The influence of different carrier gases (e.g., air and N2) on the CuO nanostructures behavior under reducing conditions (H2 gas) was studied to analyze how a particular gas atmosphere can modify the oxidation state of the sensor material in real time.

  9. Jahn-Teller assisted polaronic hole hopping as a charge transport mechanism in CuO nanograins

    Science.gov (United States)

    Younas, M.; Nadeem, M.; Idrees, M.; Akhtar, M. J.

    2012-04-01

    Impedance spectroscopy has been employed to investigate the dielectric and electric transport phenomena in sol-gel synthesized CuO nanograins. Semiconducting features of the grains and grain boundaries have been endorsed to the thermal activation of the localized charge carriers. On cooling below 303 K, a transition from Jahn-Teller polaron hopping mechanism to the Mott's variable range hopping mechanism has been observed owing to random potential fluctuations among localized sites. Activation energies for conduction and relaxation processes at grain boundaries provide strong signatures for the involvement of Jahn-Teller adiabatic small polarons as a charge transport mechanism in CuO nanograins.

  10. Double-exchange driven ferromagnetic metal-paramagnetic insulator transition in Mn-doped CuO

    Science.gov (United States)

    Filippetti, Alessio; Fiorentini, Vincenzo

    2006-12-01

    Employing ab initio self-interaction-corrected local-spin-density calculations, we explain the nature of the ferromagnetic, metallic phase of Mn-doped CuO (an antiferromagnetic insulator when undoped), and of its concurrent transitions to a paramagnetic, insulating phase. Mn-induced donor levels enable conduction through ferromagnetically aligned Mn centers and ferromagnetic CuO planes via double exchange. In the paramagnetic insulating phase, a polaron hopping mechanism consistent with the experiments is envisaged. Our results suggest the intriguing possibility of designing double-exchange driven ferromagnetic cuprates.

  11. Catalysis of the rare earth containing mixed oxides Ln2CuO4 in phenol hydroxylation

    Institute of Scientific and Technical Information of China (English)

    刘持标; 赵震; 叶兴凯; 吴越

    1997-01-01

    Mixed oxides Ln2CuO4±λ(Ln=La,Pr,Nd,Sm,Gd) with K2NiF4 structure were prepared Their crystal structures were studied with XRD and IR spectra.Meanwhile,the average valence of Cu ions and non stoichiometric oxygen (λ) were determined through chemical analyses.Catalysis of the above-mentioned mixed oxides in the phenol hydroxylation was investigated.Results show that the catalysis of these mixed oxides has close relation with their structures and composition.Substitution of A site atom in Ln2CuO4λ has a great influence on then eatalysis in the phenol hydroxylation.

  12. Long-term evaluation of hollow screw and hollow cylinder dental implants : Clinical and radiographic results after 10 years

    NARCIS (Netherlands)

    Telleman, Gerdien; Meijer, Henny J. A.; Raghoebar, Gerry M.

    Background: In 1988, an implant manufacturer offered a new dental implant system, with a wide choice of hollow cylinder (HC) and hollow screw (HS) implants. The purpose of this retrospective study of HS and HC implants was to evaluate clinical and radiographic parameters of peri-implant tissue and

  13. Facile synthesis of novel tunable highly porous CuO nanorods for high rate lithium battery anodes with realized long cycle life and high reversible capacity.

    Science.gov (United States)

    Wang, Linlin; Gong, Huaxu; Wang, Caihua; Wang, Dake; Tang, Kaibin; Qian, Yitai

    2012-11-07

    Various CuO nanostructures have been well studied as anode materials for lithium ion batteries (LIBs); however, there are few reports on the synthesis of porous CuO nanostructures used for anode materials, especially one-dimensional (1D) porous CuO. In this work, novel 1D highly porous CuO nanorods with tunable porous size were synthesized in large-quantities by a new, friendly, but very simple approach. We found that the pore size could be controlled by adjusting the sintering temperature in the calcination process. With the rising of calcination temperature, the pore size of CuO has been tuned in the range of ∼0.4 nm to 22 nm. The porous CuO materials have been applied as anode materials in LIBs and the effects of porous size on the electrochemical properties were observed. The highly porous CuO nanorods with porous size in the range of ∼6 nm to 22 nm yielded excellent high specific capacity, good cycling stability, and high rate performance, superior to that of most reported CuO nanocomposites. The CuO material delivers a high reversible capacity of 654 mA h g(-1) and 93% capacity retention over 200 cycles at a rate of 0.5 C. It also exhibits excellent high rate capacity of 410 mA h g(-1) even at 6 C. These results suggest that the facile synthetic method of producing a tunable highly porous CuO nanostructure can realize a long cycle life with high reversible capacity, which is suitable for next-generation high-performance LIBs.

  14. High-pressure hollow cathode discharges

    Science.gov (United States)

    Schoenbach, Karl H.; El-Habachi, Ahmed; Shi, Wenhui; Ciocca, Marco

    1997-11-01

    Reducing the diameter of the cathode hole in a plane anode - hollow cathode geometry to 0963-0252/6/4/003/img1m has allowed us to generate direct current discharges in argon at atmospheric pressure. Up to pressure times cathode hole diameter (pD) values of approximately 5 Torr cm, and at sub-mA currents, glow discharges (predischarges) are observed with a shape which is determined by the vacuum electric field. In the same pD range, but at higher currents of up to approximately 4 mA, the discharges are of the hollow cathode discharge type. At pD values exceeding 5 Torr cm the predischarges turn into surface discharges along the mica spacer between the electrodes. At currents > 4 mA filamentary, pulsed discharges are observed. Qualitative information on the electron energy distribution in the microdischarges has been obtained by studying the VUV emission from ionized argon atoms and the argon excimer radiation at 130 nm. The results of the spectral measurements indicate the presence of a relatively large concentration of electrons with energies > 15 eV over the entire pressure range. The fact that the current - voltage characteristic of the microdischarges has a positive slope over much of the current range where excimer radiation is emitted indicates the possibility of forming arrays of these discharges and using them in flat panel excimer lamps.

  15. Metal-Matrix/Hollow-Ceramic-Sphere Composites

    Science.gov (United States)

    Baker, Dean M.

    2011-01-01

    A family of metal/ceramic composite materials has been developed that are relatively inexpensive, lightweight alternatives to structural materials that are typified by beryllium, aluminum, and graphite/epoxy composites. These metal/ceramic composites were originally intended to replace beryllium (which is toxic and expensive) as a structural material for lightweight mirrors for aerospace applications. These materials also have potential utility in automotive and many other terrestrial applications in which there are requirements for lightweight materials that have high strengths and other tailorable properties as described below. The ceramic component of a material in this family consists of hollow ceramic spheres that have been formulated to be lightweight (0.5 g/cm3) and have high crush strength [40.80 ksi (.276.552 MPa)]. The hollow spheres are coated with a metal to enhance a specific performance . such as shielding against radiation (cosmic rays or x rays) or against electromagnetic interference at radio and lower frequencies, or a material to reduce the coefficient of thermal expansion (CTE) of the final composite material, and/or materials to mitigate any mismatch between the spheres and the matrix metal. Because of the high crush strength of the spheres, the initial composite workpiece can be forged or extruded into a high-strength part. The total time taken in processing from the raw ingredients to a finished part is typically 10 to 14 days depending on machining required.

  16. Hollow Pollen Shells to Enhance Drug Delivery

    Directory of Open Access Journals (Sweden)

    Alberto Diego-Taboada

    2014-03-01

    Full Text Available Pollen grain and spore shells are natural microcapsules designed to protect the genetic material of the plant from external damage. The shell is made up of two layers, the inner layer (intine, made largely of cellulose, and the outer layer (exine, composed mainly of sporopollenin. The relative proportion of each varies according to the plant species. The structure of sporopollenin has not been fully characterised but different studies suggest the presence of conjugated phenols, which provide antioxidant properties to the microcapsule and UV (ultraviolet protection to the material inside it. These microcapsule shells have many advantageous properties, such as homogeneity in size, resilience to both alkalis and acids, and the ability to withstand temperatures up to 250 °C. These hollow microcapsules have the ability to encapsulate and release actives in a controlled manner. Their mucoadhesion to intestinal tissues may contribute to the extended contact of the sporopollenin with the intestinal mucosa leading to an increased efficiency of delivery of nutraceuticals and drugs. The hollow microcapsules can be filled with a solution of the active or active in a liquid form by simply mixing both together, and in some cases operating a vacuum. The active payload can be released in the human body depending on pressure on the microcapsule, solubility and/or pH factors. Active release can be controlled by adding a coating on the shell, or co-encapsulation with the active inside the shell.

  17. Air Separation Using Hollow Fiber Membranes

    Science.gov (United States)

    Huang, Stephen E.

    2004-01-01

    The NASA Glenn Research Center in partnership with the Ohio Aerospace Institute provides internship programs for high school and college students in the areas of science, engineering, professional administrative, and other technical areas. During the summer of 2004, I worked with Dr. Clarence T. Chang at NASA Glenn Research Center s combustion branch on air separation using hollow fiber membrane technology. . In light of the accident of Trans World Airline s flight 800, FAA has mandated that a suitable solution be created to prevent the ignition of fuel tanks in aircrafts. In order for any type of fuel to ignite, three important things are needed: fuel vapor, oxygen, and an energy source. Two different ways to make fuel tanks less likely to ignite are reformulating the fuel to obtain a lower vapor pressure for the fuel and or using an On Board Inert Gas Generating System (OBIGGS) to inert the Central Wing Tank. goal is to accomplish the mission, which means that the Air Separation Module (ASM) tends to be bulky and heavy. The primary goal for commercial aviation companies is to transport as much as they can with the least amount of cost and fuel per person, therefore the ASM must be compact and light as possible. The plan is to take bleed air from the aircraft s engines to pass air through a filter first to remove particulates and then pass the air through the ASM containing hollow fiber membranes. In the lab, there will be a heating element provided to simulate the temperature of the bleed air that will be entering the ASM and analysis of the separated air will be analyzed by a Gas Chromatograph/Mass Spectrometer (GC/MS). The GUMS will separate the different compounds in the exit streams of the ASM and provide information on the performance of hollow fiber membranes. Hopefully I can develop ways to improve efficiency of the ASM. different types of jet fuel were analyzed and data was well represented on SAE Paper 982485. Data consisted of the concentrations of over

  18. The selection of small forest hollows for pollen analysis in boreal and temperate forest regions

    DEFF Research Database (Denmark)

    Overballe-Petersen, Mette V; Bradshaw, Richard H.W.

    2011-01-01

    Small forest hollows represent a specialised site type for pollen analysis, since they mainly record the vegetation within an approximate radius of 20-100 m from the hollow. We discuss how to choose the most appropriate small forest hollow for pollen analysis. Hollow size, site topography, location...

  19. Size effects on the magnetic and optical properties of CuO nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Rehman, Shama, E-mail: shama_r4@yahoo.com; Mumtaz, A.; Hasanain, S. K. [Quaid-I-Azam University, Department of Physics (Pakistan)

    2011-06-15

    Optical and magnetic studies on CuO nanoparticles prepared by a chemical route are reported and the effect of size variation on these properties is discussed. SEM images show that the nanoparticles are interlinked into microspheres with the cages containing visible nanoscale holes. Diffuse reflectance spectroscopy indicates a consistent red shift in the fundamental band gap (indirect band gap) from 1.23 to 1 eV as the size decreases from 29 to 11 nm. This observed red shift is attributed to the presence of defect states within the band gap. A clear blue shift is observed in the direct band gap of these nanoparticles presumably due to the quantum confinement effects. Air-annealed samples show a paramagnetic response whereas particles annealed in a reducing atmosphere show additionally a weak ferromagnetic component at room temperature. For both types of particles, the paramagnetic and ferromagnetic moments, respectively, increase with decreasing size. The role of oxygen vacancies is understood to relate to the generation of free carriers mediating ferromagnetism between Cu spins. AC susceptibility measurements show both the antiferromagnetic transitions of CuO including the one at 231 K which is associated with the onset of the spiral antiferromagnetic phase transition.

  20. Structural and dielectric properties of Mn doped copper oxide (CuO) nanostructure

    Science.gov (United States)

    Khan, Imran; Khan, Shakeel; Ahmed, Hilal; Nongjai, Razia

    2013-06-01

    Undoped and Mn doped CuO nanocrystalline powder samples were prepared through standard solid state reaction method. The crystal structures of the CuO nanoparticles were characterized by X-ray diffraction. Dielectric measurements were performed on samples as a function of frequency at room temperate to determine the dielectric behavior of the samples. XRD data exhibited the presence of monoclinic crystal structure similar to the parent compound in all samples, suggesting that doped Mn ions sit at the regular lattice sites. The average crystallite size, calculated using Scherrer formula from XRD data, is found within the range of 23-27 nm. The dielectric constant (ɛ'), imaginary part of dielectric constant (ɛ") and loss tangent (tanδ) were studied as a function of frequency and composition at room temperature. The dependence of dielectric constant (ɛ') on frequency suggests a conduction mechanism in terms of hopping. This behavior can be explained on the basis of space charge polarization according to Maxwell and Wagner's two-layer model.

  1. GMI effect in CuO coated Co-based amorphous ribbons

    Energy Technology Data Exchange (ETDEWEB)

    Taysioglu, Asli Ayten [Department of Physics, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Peksoz, Ahmet, E-mail: peksoz@uludag.edu.t [Department of Physics, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Kaya, Yunus [Department of Chemistry, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Derebasi, Naim [Department of Physics, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Irez, Gazi [Department of Chemistry, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Kaynak, Gokay [Department of Physics, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey)

    2009-11-13

    A Copper oxide (CuO) film has been grown on a surface of Co-based amorphous ribbon using chemical successive ionic layer adsorption and reaction technique, at room temperature and atmosphere pressure. The influence of coating and width of ribbon on giant magneto impedance have been investigated over a frequency range from 0.1 to 3 MHz and under a static magnetic field between -8 and +8 kA/m. The results showed that Co-based amorphous ribbons, which are coated CuO film, have a significant effect on the magnitude and operation frequency for the giant magneto impedance effect as compared to the samples without coating. The highest giant magneto impedance effect was found to be 14.90 on 5 mm width coated ribbon, which is 60% higher than the sample without coating. A surface observation of these samples has been carried out by an atomic force microscope. The AFM images reveal the difference between surfaces of coated and as-cast sample.

  2. How assembly matters to catalysis and thermal conductivity mediated by CuO nanoparticles

    Science.gov (United States)

    Mohsen Ismail, Ahmed; Emara, Mahmoud Mohamed; Salah El din Kassem, Taher; Moussa, Mahmoud Ahmed

    2017-02-01

    CuO nanostructures (NSs) of different morphologies were prepared, applied as catalysts for the pyrolysis of sugarcane bagasse (PSCB), and applied for thermally-conductive nanofluids. Both size and shape of the prepared NSs ranged from 5 to 1000 nm, and from nanodots (NDs) to spindle nano-aggregates (NAs), respectively. The catalytic activity of these NSs towards the PSCB was followed up by thermogravimetric analysis (TGA), where they increased the percentage of total weight loss, and lowered the decomposition temperatures of PSCB. The Coats-Redfern kinetic model showed a decline in activation energy by 57 and 9-43 kJ mol-1 for NDs and NAs, respectively. Colloidal dispersions of CuO NDs and NAs in monoethylene glycol (MEG) were prepared with volume fractions ({\\varphi }v) of 0.01-0.04%, where thermal conductivity improved with increasing {\\varphi }v. At all values of {\\varphi }v, the best enhancements were exerted by NDs. The nature of assembly impacted the catalyzed PSCB and the thermal conductivity of MEG. This behavior depends to a large extent on the NAs that expose a different fraction of crystal facets of different reactivities and surface areas, not on the constituent nanorods (NRs).

  3. The chronic toxicity of CuO nanoparticles and copper salt to Daphnia magna.

    Science.gov (United States)

    Adam, Nathalie; Vakurov, Alexander; Knapen, Dries; Blust, Ronny

    2015-01-01

    In this study, the effects of CuO nanoparticles and CuCl2·2H2O were tested on Daphnia magna under chronic exposure scenarios. During a 21-day exposure to the nanoparticles and salt, the reproduction was followed by a daily count of the number of offspring. After the exposure, the adult Daphnia length and uptake of copper was measured. The dissolved, nanoparticle and aggregated fractions were distinguished in the exposure medium. The results showed that only a small fraction of the nanoparticles dissolved, while the majority of the particles formed large aggregates (>450 nm). The dissolved fraction of the nanoparticles corresponded with the dissolved fraction of the copper salt. The effects of the nanoparticles (reproduction EC10: 0.546 mg Cu/l, EC20: 0.693 mg Cu/l, EC50: 1.041 mg Cu/l) on reproduction and length were much lower than the effects of the copper salts (reproduction EC10: 0.017 mg Cu/l, EC20: 0.019 mg Cu/l, EC50: 0.022 mg Cu/l). Based upon total body analysis, the Daphnia copper concentration appeared much higher when exposed to the nanoparticles than when exposed to the salt. These combined results indicate that the toxicity of CuO nanoparticles to D. magna is caused by copper ions formed during dissolution of the nanoparticles in the exposure medium. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. Positron annihilation spectroscopy study on annealing effect of CuO nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Jianjian; Wang, Jiaheng; Yang, Wei; Zhu, Zhejie; Wu, Yichu, E-mail: ycwu@whu.edu.cn [School of Physics and Technology, Hubei Key Laboratory of Nuclear Solid State Physics, Wuhan University (WHU), Wuhan (China)

    2016-03-15

    The microstructure and defects of CuO nanoparticles under isochronal annealing were investigated by positron annihilation spectroscopy (PAS), X-ray diffraction (XRD) and scanning electron microscope (SEM). XRD and SEM results indicated that the average grain sizes of CuO nanoparticles grew slowly below 800 °C, and then increased rapidly with the annealing temperature from 800 to 1000 °C. Positron lifetime analysis exhibited that positrons were mainly annihilated in mono-vacancies (V{sub Cu}, V{sub O}) and vacancy clusters when annealing from 200 to 800 °C. Furthermore, W-S plot of Doppler broadening spectra at different annealing temperatures found that the (W, S) points distributed on two different defect species, which suggested that V{sup −}{sub Cu} - V{sup +}{sub O} complexes were produced when the grains grew to bigger size after annealing above 800 °C, and positrons might annihilate at these complexes. (author)

  5. Photocatalytic generation of hydrogen under visible light on La2CuO4

    Indian Academy of Sciences (India)

    H Lahmar; M Trari

    2015-08-01

    The semiconducting properties of La2CuO4 prepared by a chemical route are investigated for the first time by the photo-electrochemical technique. The optical gap is found to be 1.27 eV and the transition is directly allowed. p-Type conductivity is demonstrated from the Mott–Schottky plot in alkaline KOH solution (0.1 M), extrapolation of the linear region to the potential axis gives a flat band potential of −0.41 VSCE, a holes density of 1.75 × 1019 cm−3 and a space-charge region of 18 nm. The electrochemical impedance spectroscopy, measured over the frequency range (1 mHz–105 Hz), reveals the predominance of the bulk contribution with a constant phase element. The energy diagram shows the feasibility of La2CuO4 for the H2 evolution under visible light. The best performance occurs at pH 12.5 in the presence of S2O$^{2-}_{3}$ as holes scavenger. A liberation rate of 20.6 mol mn−1 (g catalyst)−1 is obtained under full light (29 mW cm−2).

  6. Controllable fabrication of nanowire-like CuO film by anodization and its properties

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yongqian, E-mail: cugwyq@126.com [Faculty of Material Science and Chemistry, China University of Geoscience, Wuhan 430074 (China); Jiang, Tingting; Meng, Dawei; Jin, Hongyun [Faculty of Material Science and Chemistry, China University of Geoscience, Wuhan 430074 (China); Yu, Meihua [Guangxi Experiment Centre of Science and Technology, Nanning 530004 (China)

    2015-09-15

    Graphical abstract: - Highlights: • The average diameter of single nanowire is only 25 nm and the length can be tuned. • The method has the advantages of pure CuO phase and fast reaction rate. • H{sub 2}O–EtOH mix solvent can significantly improve optical and photocatalytic activities. • Clarify the growth process in detail. - Abstract: We report a simple electrochemical etching and a subsequent heat treatment to synthesize nanowire-like CuO thin films with pure phase at room temperature. The reaction media has great effect on microstructure of products to significantly improve optical and photocatalytic activities of materials. Detailed characterizations of the synthesized nanomaterials are performed utilizing X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) to study their crystalline phase and morphology. The photoluminescence (PL) spectrum shows a main emission peak and a blue emission band whose centers are located at 352 nm and 463 nm, respectively. Photocatalytic study demonstrated the degradation of methylene blue (MB) can reach 95.6% after 210 min irradiation, showing its potential application in waste water treatment. A plausible growth mechanism for the transformation is also proposed.

  7. Ecotoxicity of nanoparticles of CuO and ZnO in natural water

    Energy Technology Data Exchange (ETDEWEB)

    Blinova, I., E-mail: irina.blinova@kbfi.e [Laboratory of Molecular Genetics, National Institute of Chemical Physics and Biophysics, Akadeemia tee 23, Tallinn 12618 (Estonia); Ivask, A. [Laboratory of Molecular Genetics, National Institute of Chemical Physics and Biophysics, Akadeemia tee 23, Tallinn 12618 (Estonia); Heinlaan, M. [Laboratory of Molecular Genetics, National Institute of Chemical Physics and Biophysics, Akadeemia tee 23, Tallinn 12618 (Estonia); Estonian University of Life Sciences, Kreutzwaldi 5, Tartu 51014 (Estonia); Mortimer, M. [Laboratory of Molecular Genetics, National Institute of Chemical Physics and Biophysics, Akadeemia tee 23, Tallinn 12618 (Estonia); Tallinn University of Technology, Akadeemia tee 15, Tallinn 12618 (Estonia); Kahru, A. [Laboratory of Molecular Genetics, National Institute of Chemical Physics and Biophysics, Akadeemia tee 23, Tallinn 12618 (Estonia)

    2010-01-15

    The acute toxicity of CuO and ZnO nanoparticles in artificial freshwater (AFW) and in natural waters to crustaceans Daphnia magna and Thamnocephalus platyurus and protozoan Tetrahymena thermophila was compared. The L(E)C{sub 50} values of nanoCuO for both crustaceans in natural water ranged from 90 to 224 mg Cu/l and were about 10-fold lower than L(E)C{sub 50} values of bulk CuO. In all test media, the L(E)C{sub 50} values for both bulk and nanoZnO (1.1-16 mg Zn/l) were considerably lower than those of nanoCuO. The natural waters remarkably (up to 140-fold) decreased the toxicity of nanoCuO (but not that of nanoZnO) to crustaceans depending mainly on the concentration of dissolved organic carbon (DOC). The toxicity of both nanoCuO and nanoZnO was mostly due to the solubilised ions as determined by specific metal-sensing bacteria. - Natural waters remarkably reduced the toxicity of nanoCuO but not nanoZnO.

  8. Flow drag and heat transfer characteristics of drag-reducing nanofluids with CuO nanoparticles

    Science.gov (United States)

    Wang, Ping-Yang; Wang, Xue-Jiao; Liu, Zhen-Hua

    2017-02-01

    A new kind of aqueous CuO nanofluid with drag-reducing performance was developed. The new working fluid was an aqueous CTAC (cetyltrimethyl ammonium chloride) solution with CuO nanoparticles added and has both special effects of drag-reducing and heat transfer enhancement. An experiment was carried out to investigate the forced convective flow and heat transfer characteristics of conventional drag reducing fluid (aqueous CTAC solution) and the new drag-reducing nanofluid in a test tube with an inner diameter of 25.6 mm. Results indicated that there were no obvious differences of the drag-reducing characteristics between conventional drag reducing fluid and new drag-reducing nanofluid. However, their heat transfer characteristics were obvious different. The heat transfer characteristics of the new drag-reducing nanofluid significantly depend on the liquid temperature, the nanoparticle concentration and the CTAC concentration. The heat transfer enhancement technology of nanofluid could be applied to solve the problem of heat transfer deterioration for conventional drag-reducing fluids.

  9. Flow drag and heat transfer characteristics of drag-reducing nanofluids with CuO nanoparticles

    Science.gov (United States)

    Wang, Ping-Yang; Wang, Xue-Jiao; Liu, Zhen-Hua

    2016-05-01

    A new kind of aqueous CuO nanofluid with drag-reducing performance was developed. The new working fluid was an aqueous CTAC (cetyltrimethyl ammonium chloride) solution with CuO nanoparticles added and has both special effects of drag-reducing and heat transfer enhancement. An experiment was carried out to investigate the forced convective flow and heat transfer characteristics of conventional drag reducing fluid (aqueous CTAC solution) and the new drag-reducing nanofluid in a test tube with an inner diameter of 25.6 mm. Results indicated that there were no obvious differences of the drag-reducing characteristics between conventional drag reducing fluid and new drag-reducing nanofluid. However, their heat transfer characteristics were obvious different. The heat transfer characteristics of the new drag-reducing nanofluid significantly depend on the liquid temperature, the nanoparticle concentration and the CTAC concentration. The heat transfer enhancement technology of nanofluid could be applied to solve the problem of heat transfer deterioration for conventional drag-reducing fluids.

  10. 3D graphene foams decorated by CuO nanoflowers for ultrasensitive ascorbic acid detection.

    Science.gov (United States)

    Ma, Ye; Zhao, Minggang; Cai, Bin; Wang, Wei; Ye, Zhizhen; Huang, Jingyun

    2014-09-15

    When the in vitro research works of biosensing begin to mimic in vivo conditions, some certain three-dimensional (3D) structures of biosensors are needed to accommodate biomolecules, bacteria or even cells to resemble the in vivo 3D environment. To meet this end, a novel method of synthesizing CuO nanoflowers on the 3D graphene foam (GF) was first demonstrated. The 3DGF/CuO nanoflowers composite was used as a monolithic free-standing 3D biosensor for electrochemical detection of ascorbic acid (AA). The 3D conductive structure of the GF is favorable for current collection, mass transport and loading bioactive chemicals. And CuO nanoflowers further increase the active surface area and catalyze the redox of AA. Thus, all these features endows 3DGF/CuO composite with outstanding biosensing properties such as an ultrahigh sensitivity of 2.06 mA mM(-1) cm(-2) to AA at 3 s response time.

  11. Design method of coaxial reflex hollow beam generator

    Science.gov (United States)

    Wang, Jiake; Xu, Jia; Fu, Yuegang; He, Wenjun; Zhu, Qifan

    2016-10-01

    In view of the light energy loss in central obscuration of coaxial reflex optical system, the design method of a kind of hollow beam generator is introduced. First of all, according to the geometrical parameter and obscuration ratio of front-end coaxial reflex optical system, calculate the required physical dimension of hollow beam, and get the beam expanding rate of the hollow beam generator according to the parameters of the light source. Choose the better enlargement ratio of initial expanding system using the relational expression of beam expanding rate and beam expanding rate of initial system; the traditional design method of the reflex optical system is used to design the initial optical system, and then the position of rotation axis of the hollow beam generator can be obtained through the rotation axis translation formula. Intercept the initial system bus bar using the rotation axis after the translation, and rotate the bus bar around the rotation axis for 360°, so that two working faces of the hollow beam generator can be got. The hollow beam generator designed by this method can get the hollow beam that matches the front-end coaxial reflex optical system, improving the energy utilization ratio of beam and effectively reducing the back scattering of transmission system.

  12. Experimental study on hollow structural component by explosive welding

    Energy Technology Data Exchange (ETDEWEB)

    Duan, Mianjun, E-mail: dmjwl@163.com [PLA University of Science and Technology, Nanjing 210007 (China); Wei, Ling, E-mail: 386006087@qq.com [Tongda College, Nanjing University of Posts and Telecommunication, Nanjing 210007 (China); Hong, Jin [PLA University of Science and Technology, Nanjing 210007 (China); Ran, Hong [Southwestern Institute of Physics, Chengdu 610041 (China); Ma, Rui; Wang, Yaohua [PLA University of Science and Technology, Nanjing 210007 (China)

    2014-12-15

    Highlights: • This paper relates to a study on a thin double-layers hollow structural component by using an explosive welding technology. • This thin double-layer hollow structural component is an indispensable component required for certain core equipment of thermonuclear experimental reactor. • An adjusted explosive welding technology for manufacturing an inconel625 hollow structural component was developed which cannot be made by common technology. • The result shows that a metallurgical bonding was realized by the ribs and slabs of the hollow sheet. • The shearing strength of bonding interface exceeds that of the parent metal. - Abstract: A large thin-walled hollow structural component with sealed channels is required for the vacuum chamber of a thermonuclear experimental reactor, with inconel625 as its fabrication material. This hollow structural component is rarely manufactured by normal machining method, and its manufacture is also problematic in the field of explosive welding. With this in mind, we developed an adjusted explosive welding technology which involves a two-step design, setting and annealing technology. The joints were evaluated using optical microscope and scanning electron microscope, and a mechanical experiment was conducted, involving micro-hardness test, cold helium leak test and hydraulic pressure test. The results showed that a metallurgical bonding was realized by the ribs and slabs, and the shearing strength of the bonding interface exceeded that of the parent metal. Hence, the hollow structural component has a good comprehensive mechanical performance and sealing property.

  13. Energy efficient engine shroudless, hollow fan blade technology report

    Science.gov (United States)

    Michael, C. J.

    1981-01-01

    The Shroudless, Hollow Fan Blade Technology program was structured to support the design, fabrication, and subsequent evaluation of advanced hollow and shroudless blades for the Energy Efficient Engine fan component. Rockwell International was initially selected to produce hollow airfoil specimens employing the superplastic forming/diffusion bonding (SPF/DB) fabrication technique. Rockwell demonstrated that a titanium hollow structure could be fabricated utilizing SPF/DB manufacturing methods. However, some problems such as sharp internal cavity radii and unsatisfactory secondary bonding of the edge and root details prevented production of the required quantity of fatigue test specimens. Subsequently, TRW was selected to (1) produce hollow airfoil test specimens utilizing a laminate-core/hot isostatic press/diffusion bond approach, and (2) manufacture full-size hollow prototype fan blades utilizing the technology that evolved from the specimen fabrication effort. TRW established elements of blade design and defined laminate-core/hot isostatic press/diffusion bonding fabrication techniques to produce test specimens. This fabrication technology was utilized to produce full size hollow fan blades in which the HIP'ed parts were cambered/twisted/isothermally forged, finish machined, and delivered to Pratt & Whitney Aircraft and NASA for further evaluation.

  14. Improved Rare-Earth Emitter Hollow Cathode

    Science.gov (United States)

    Goebel, Dan M.

    2011-01-01

    An improvement has been made to the design of the hollow cathode geometry that was created for the rare-earth electron emitter described in Compact Rare Earth Emitter Hollow Cathode (NPO-44923), NASA Tech Briefs, Vol. 34, No. 3 (March 2010), p. 52. The original interior assembly was made entirely of graphite in order to be compatible with the LaB6 material, which cannot be touched by metals during operation due to boron diffusion causing embrittlement issues in high-temperature refractory materials. Also, the graphite tube was difficult to machine and was subject to vibration-induced fracturing. This innovation replaces the graphite tube with one made out of refractory metal that is relatively easy to manufacture. The cathode support tube is made of molybdenum or molybdenum-rhenium. This material is easily gun-bored to near the tolerances required, and finish machined with steps at each end that capture the orifice plate and the mounting flange. This provides the manufacturability and robustness needed for flight applications, and eliminates the need for expensive e-beam welding used in prior cathodes. The LaB6 insert is protected from direct contact with the refractory metal tube by thin, graphite sleeves in a cup-arrangement around the ends of the insert. The sleeves, insert, and orifice plate are held in place by a ceramic spacer and tungsten spring inserted inside the tube. To heat the cathode, an insulating tube is slipped around the refractory metal hollow tube, which can be made of high-temperature materials like boron nitride or aluminum nitride. A screw-shaped slot, or series of slots, is machined in the outside of the ceramic tube to constrain a refractory metal wire wound inside the slot that is used as the heater. The screw slot can hold a single heater wire that is then connected to the front of the cathode tube by tack-welding to complete the electrical circuit, or it can be a double slot that takes a bifilar wound heater with both leads coming out

  15. Formation of hollow nanocrystals through the nanoscale kirkendall effect

    Energy Technology Data Exchange (ETDEWEB)

    Yin, Yadong; Rioux, Robert M.; Erdonmez, Can K.; Hughes, Steven; Somorjai, Gabor A.; Alivisatos, A. Paul

    2004-03-11

    We demonstrate that hollow nanocrystals can be synthesized through a mechanism analogous to the Kirkendall Effect, in which pores form due to the difference in diffusion rates between two components in a diffusion couple. Cobalt nanocrystals are chosen as a primary example to show that their reaction in solution with oxygen, sulfur or selenium leads to the formation of hollow nanocrystals of the resulting oxide and chalcogenides. This process provides a general route to the synthesis of hollow nanostructures of large numbers of compounds. A simple extension of this process yields platinum-cobalt oxide yolk-shell nanostructures which may serve as nanoscale reactors in catalytic applications.

  16. Hollow Gaussian Schell-model beam and its propagation

    CERN Document Server

    Wang, Li-Gang

    2007-01-01

    In this paper, we present a new model, hollow Gaussian-Schell model beams (HGSMBs), to describe the practical dark hollow beams. An analytical propagation formula for HGSMBs passing through a paraxial first-order optical system is derived based on the theory of coherence. Based on the derived formula, an application example showing the influence of spatial coherence on the propagation of beams is illustrated. It is found that the beam propagating properties of HGSMBs will be greatly affected by their spatial coherence. Our model provides a very convenient way for analyzing the propagation properties of partially coherent dark hollow beams.

  17. A NOVEL METHOD TO PREPARE CROSSLINKED POLYETHYLENEIMINE HOLLOW NANOSPHERES

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A novel method to prepare crosslinked polyethyleneimine (CPEI) hollow nanospheres was reported.Uniform silica nanospheres were used as templates,3-aminopropyl trimethoxysilane (APS) was immobilized on the surface of silica nanospheres as couple agent.Aziridine was initiated ring-opening polymerization with the amino groups in APS to form polyethyleneimine (PEI) shell layer.1,4-Butanediol diacrylate was utilized to crosslink PEI polymeric shell.The silica nanospheres in core were etched by hydrofluoric acid to obtain hollow CPEI nanospheres.The hollow nanospheres were characterized by X-ray photoelectron spectroscopy (XPS),transmission electron microscopy (TEM),and thermogravimetric analysis (TGA).

  18. The Romantic Prototype of The Legend of Sleepy Hollow

    Institute of Scientific and Technical Information of China (English)

    冯育军; 王艳

    2016-01-01

    "The Legend of Sleepy Hollow" is a short story of speculative fiction by American author Washington Irving, con-tained in his collection of 34 essays and short stories entitled The Sketch Book of Geoffrey Crayon, Gent. Written while Irving was living abroad in Birmingham, England,"The Legend of Sleepy Hollow"was first published in 1820. Along with Irving's com-panion piece"Rip Van Winkle","The Legend of Sleepy Hollow"is among the earliest examples of American fiction with endur-ing popularity, especially during the Halloween season.

  19. Hollow infrared fibers fabricated by glass-drawing technique.

    Science.gov (United States)

    Matsuura, Yuji; Kasahara, Ryosuke; Katagiri, Takashi; Miyagi, Mitsunobu

    2002-06-17

    Hollow glass fibers for delivery of mid-infrared lasers are drawn from a glass-tube preform to produce a long and flexible hollow fiber at low cost. To utilize the interference effect of the thin glass wall, the wall thickness is controlled by the drawing speed. A Pyrex-glass hollow fiber with an inner diameter of 280 microm and a wall thickness of 9.92 microm shows a low loss at 2.94 microm of the Er:YAG laser wavelength when coated with a silver film on the outer surface.

  20. New cobweb-structure hollow Bragg optical fibers

    Institute of Scientific and Technical Information of China (English)

    YU Rong-jin; ZHANG Yong-qiang; ZHANG Bing; WANG Chao-ran; WU Chang-qi

    2007-01-01

    A new type of Bragg fibers,i.e. hollow-core cobweb-structured optical fibers,which can be used to the low-loss transmission from visible to near infrared region (0.65 μm-1.55 μm),terahertz wave (200 μm-480 μm) and circular-polarization-maintaining single-mode transmission are investigated. Results show that the hollow-core cobweb-structured fibers have less loss than other hollow-core Bragg fibers. The fibers can be constituted by using the plastics or glasses with large absorption losses.

  1. Development of hollow electron beams for proton and ion collimation

    CERN Document Server

    Stancari, G.; Kuznetsov, G.; Shiltsev, V.; Still, D.A.; Valishev, A.; Vorobiev, L.G.; Assmann, R.; Kabantsev, A.

    2010-01-01

    Magnetically confined hollow electron beams for controlled halo removal in high-energy colliders such as the Tevatron or the LHC may extend traditional collimation systems beyond the intensity limits imposed by tolerable material damage. They may also improve collimation performance by suppressing loss spikes due to beam jitter and by increasing capture efficiency. A hollow electron gun was designed and built. Its performance and stability were measured at the Fermilab test stand. The gun will be installed in one of the existing Tevatron electron lenses for preliminary tests of the hollow-beam collimator concept, addressing critical issues such as alignment and instabilities of the overlapping proton and electron beams

  2. Hollow Electron Beam Collimator: R&D Status Report

    CERN Document Server

    Stancari, G; Kuznetsov, G; Shiltsev, V; Valishev, A; Kabantsev, A; Vorobiev, L

    2012-01-01

    Magnetically confined hollow electron beams for controlled halo removal in high-energy colliders such as the Tevatron or the LHC may extend traditional collimation systems beyond the intensity limits imposed by tolerable material damage. They may also improve collimation performance by suppressing loss spikes due to beam jitter and by increasing capture efficiency. A hollow electron gun was designed and built. Its performance and stability were measured at the Fermilab test stand. The gun will be installed in one of the existing Tevatron electron lenses for preliminary tests of the hollow-beam collimator concept, addressing critical issues such as alignment and instabilities of the overlapping proton and electron beams.

  3. Development of hollow electron beams for proton and ion collimation

    CERN Document Server

    Stancari, G; Kuznetsov, G; Shiltsev, V; Still, D A; Valishev, A; Vorobiev, L G; Assmann, R; Kabantsev, A

    2012-01-01

    Magnetically confined hollow electron beams for controlled halo removal in high-energy colliders such as the Tevatron or the LHC may extend traditional collimation systems beyond the intensity limits imposed by tolerable material damage. They may also improve collimation performance by suppressing loss spikes due to beam jitter and by increasing capture efficiency. A hollow electron gun was designed and built. Its performance and stability were measured at the Fermilab test stand. The gun will be installed in one of the existing Tevatron electron lenses for preliminary tests of the hollow-beam collimator concept, addressing critical issues such as alignment and instabilities of the overlapping proton and electron beams.

  4. Axisymmetric Vibration of Piezo-Lemv Composite Hollow Multilayer Cylinder

    Directory of Open Access Journals (Sweden)

    E. S. Nehru

    2012-01-01

    Full Text Available Axisymmetric vibration of an infinite piezolaminated multilayer hollow cylinder made of piezoelectric layers of 6 mm class and an isotropic LEMV (Linear Elastic Materials with Voids layers is studied. The frequency equations are obtained for the traction free outer surface with continuity conditions at the interfaces. Numerical results are carried out for the inner, middle, and outer hollow piezoelectric layers bonded by LEMV (It is hypothetical material layers and the dispersion curves are compared with that of a similar 3-layer model and of 3 and 5 layer models with inner, middle, and outer hollow piezoelectric layers bonded by CFRP (Carbon fiber reinforced plastics.

  5. Effect of bath concentration on the growth and photovoltaic response of SILAR-deposited CuO thin films

    Science.gov (United States)

    Visalakshi, S.; Kannan, R.; Valanarasu, S.; Kim, Hyun-Seok; Kathalingam, A.; Chandramohan, R.

    2015-09-01

    Solar cell property of p-CuO/n-Si heterojunction was investigated using SILAR-deposited CuO thin films. The effects of copper salt concentration on the growth of CuO films and its effect on the efficiency in solar cell conversion were investigated. Structural, morphological, optical and electrical studies of the CuO thin films deposited at 90 °C with different copper sulphate concentrations are reported. Crystallinity of the film is found to increase with the increase in copper sulphate concentration. The measured Raman spectrum of the deposited film showed peaks corresponding to CuO phase. It is observed by the SEM that the film is homogeneous fully covering the substrate. The optical band gap of the deposited film has exhibited a decrease in band gap from 1.76 to 1.57 eV with the increase in copper sulphate concentration. Solar cell device was constructed using the p-CuO film deposited on n-silicon substrate, and its photovoltaic response was measured. It showed increasing photoresponse with increasing concentration of copper sulphate.

  6. Study of Fe2O3, CuO, ZnO catalyzed efficient Hantzsch reaction under different conditions

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Shushizadeh

    2015-05-01

    Full Text Available 1,4-dihydropyridine derivatives one-pot synthesis under different condition was described. CuO nanoparticle as a catalyst in microwave irradiation (100w gives product with excellent yields (≥87% and short reaction time. No significant difference was observed between the obtained yield by using ZnO and Fe2O3.

  7. Complete transformation of ZnO and CuO nanoparticles in culture medium and lymphocyte cells during toxicity testing

    Science.gov (United States)

    Here, we present evidence on complete transformation of ZnO and CuO nanoparticles, which are among the most heavily studied metal oxide particles, during 24 h in vitro toxicological testing with human T-lymphocytes. Synchrotron radiation-based X-ray absorption near edge st...

  8. Controlled Synthesis of Nanomaterials at the Undergraduate Laboratory: Cu(OH)[subscript 2] and CuO Nanowires

    Science.gov (United States)

    da Silva, Anderson G. M.; Rodrigues, Thenner S.; Parussulo, Andre´ L. A.; Candido, Eduardo G.; Geonmonond, Rafael S.; Brito, Hermi F.; Toma, Henrique E.; Camargo, Pedro H. C.

    2017-01-01

    Undergraduate-level laboratory experiments that involve the synthesis of nanomaterials with well-defined/controlled shapes are very attractive under the umbrella of nanotechnology education. Herein we describe a low-cost and facile experiment for the synthesis of Cu(OH)[subscript 2] and CuO nanowires comprising three main parts: (i) synthesis of…

  9. Optical and magnetic properties of Co-doped CuO flower/plates/particles-like nanostructures.

    Science.gov (United States)

    Basith, N Mohamed; Vijaya, J Judith; Kennedy, L John; Bououdina, M; Hussain, Shamima

    2014-03-01

    In this study, pure and Co-doped CuO nanostructures (0.5, 1.0, 1.5, and 2.0 at wt% of Co) were synthesized by microwave combustion method. The prepared samples were characterized by X-ray diffraction (XRD), high resolution scanning electron microscopy (HR-SEM), energy dispersive X-ray analysis (EDX), diffuse reflectance spectroscopy (DRS), photoluminescence (PL) spectroscopy and vibrating sample magnetometry (VSM). Powder X-ray diffraction patterns refined by the Rietveld method indicated the formation of single-phase monoclinic structure. The surface morphology and elemental analysis of Co-doped CuO nanostructures were studied by using HR-SEM and EDX. Interestingly, the morphology was found to change considerably from nanoflowers to nanoplates then to nanoparticles with the variation of Co concentration. The optical band gap calculated using DRS was found to be 2.1 eV for pure CuO and increases up to 3.4 eV with increasing cobalt content. Photoluminescence measurements also confirm these results. The magnetic measurements indicated that the obtained nanostructures were ferromagnetic at room temperature with an optimum value of saturation magnetization at 1.0 wt.% of Co-doped CuO, i.e., 970 micro emu/g.

  10. CuO nanoparticles incorporated in hierarchical MFI zeolite as highly active electrocatalyst for non-enzymatic glucose sensing.

    Science.gov (United States)

    Dong, Junping; Tian, Taolei; Ren, Linxiao; Zhang, Yuan; Xu, Jiaqiang; Cheng, Xiaowei

    2015-01-01

    A hierarchical MFI zeolite, with typical micro/meso bimodal pore structures, was prepared by desilication method. CuO nanoparticles (NPs) were incorporated into the hierarchical MFI zeolite by impregnation method. CuO/hierarchical zeolite composites were characterized by X-ray diffraction, transmission electron microscopy and nitrogen sorption. It is shown that the CuO nanoparticles are mostly dispersed in the mesopores with remaining of the crystallinity and morphology of the host zeolite. CuO nanoparticles located in hierarchical zeolite exhibit the excellent electrocatalytic performances to oxidation of glucose in alkaline media. The electrocatalytic activity enhances with increasing the loading content of CuO from 5% to 15%. The composites were fabricated for nonenzyme glucose sensing. Under the optimal conditions, the sensor shows a wide linear range from 5×10(-7) to 1.84×10(-2) M with a low detection limit of 3.7×10(-7) M. The sensor also exhibits good repeatability, long-term stability as well as high selectivity against interfering species.

  11. Fabrication of Fe3O4@CuO core-shell from MOF based materials and its antibacterial activity

    Science.gov (United States)

    Rajabi, S. K.; Sohrabnezhad, Sh.; Ghafourian, S.

    2016-12-01

    Magnetic Fe3O4@CuO nanocomposite with a core/shell structure was successfully synthesized via direct calcinations of magnetic Fe3O4@HKUST-1 in air atmosphere. The morphology, structure, magnetic and porous properties of the as-synthesized nano composites were characterized by using scanning electron microscope (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (PXRD), and vibration sample magnetometer (VSM). The results showed that the nanocomposite material included a Fe3O4 core and a CuO shell. The Fe3O4@CuO core-shell can be separated easily from the medium by a small magnet. The antibacterial activity of Fe3O4-CuO core-shell was investigated against gram-positive and gram-negative bacteria. A new mechanism was proposed for inactivation of bacteria over the prepared sample. It was demonstrated that the core-shell exhibit recyclable antibacterial activity, acting as an ideal long-acting antibacterial agent.

  12. CuO nanoparticles supported on nitrogen and sulfur co-doped graphene nanocomposites for non-enzymatic glucose sensing

    Science.gov (United States)

    Li, Meixia; Guo, Qingbin; Xie, Juan; Li, Yongde; Feng, Yapeng

    2017-01-01

    Developing highly active catalysts to promote the electrocatalytic glucose oxidation (EGO) is a crucial demand for non-enzymatic glucose sensing. Herein, we reported the use of nitrogen and sulfur co-doped graphene (NSG) as a novel support material for anchoring CuO nanoparticles and obtained CuO/NSG was employed as an efficient EGO catalyst for non-enzymatic glucose sensing. The results showed that the NSG endowed the CuO/NSG with large surface area, increased structural defects, improved conductivity, and strong covalent coupling between NSG and CuO. Owing to the significant contribution of NSG and the synergistic effect of NSG and CuO, the CuO/NSG exhibited a remarkably higher EGO activity than CuO and CuO/reduced graphene oxide. The CuO/NSG-based sensor displayed excellent glucose sensing performances with a considerably low detection limit of 0.07 μM. These findings elucidate that the NSG is a promising support material for non-enzymatic glucose detection.

  13. Developmental abnormalities and neurotoxicological effects of CuO NPs on the black sea urchin Arbacia lixula by embryotoxicity assay.

    Science.gov (United States)

    Maisano, Maria; Cappello, Tiziana; Catanese, Eva; Vitale, Valeria; Natalotto, Antonino; Giannetto, Alessia; Barreca, Davide; Brunelli, Elvira; Mauceri, Angela; Fasulo, Salvatore

    2015-10-01

    The embryotoxicity of CuO NPs was evaluated in the black sea urchin Arbacia lixula embryos, by using 24-well plates. Fertilized eggs were exposed to five doses of CuO NPs ranging from 0.07 to 20 ppb, until pluteus stage. CuO NPs suspensions in artificial seawater formed agglomerates of 80-200 nm size, and copper uptake was 2.5-fold up in larvae exposed to high NP concentrations in respect to control. Developmental delay and morphological alteration, including skeletal abnormalities, were observed, as well as impairment in cholinergic and serotonergic nervous systems. These findings suggest the potential of CuO NPs to interfere with the normal neurotransmission pathways, thus affecting larval morphogenesis. Overall, the embryotoxicity tests are effective for evaluation of nanoparticle effects on the health of aquatic biota. Furthermore, as the black sea urchin A. lixula demonstrated to be vulnerable to NP exposure, it may be a valid bioindicator in marine biomonitoring and ecotoxicological programmes.

  14. Acute effects of Fe₂O₃, TiO₂, ZnO and CuO nanomaterials on Xenopus laevis.

    Science.gov (United States)

    Nations, Shawna; Wages, Mike; Cañas, Jaclyn E; Maul, Jonathan; Theodorakis, Chris; Cobb, George P

    2011-05-01

    Metal oxide nanomaterials have exhibited toxicity to a variety of aquatic organisms, especially microbes and invertebrates. To date, few studies have evaluated the toxicity of metal oxide nanomaterials on aquatic vertebrates. Therefore, this study examined effects of ZnO, TiO(2), Fe(2)O(3), and CuO nanomaterials (20-100 nm) on amphibians utilizing the Frog Embryo Teratogenesis Assay Xenopus (FETAX) protocol, a 96 h exposure with daily solution exchanges. Nanomaterials were dispersed in reconstituted moderately hard test medium. These exposures did not increase mortality in static renewal exposures containing up to 1,000 mg L(-1) for TiO(2), Fe(2)O(3), CuO, and ZnO, but did induce developmental abnormalities. Gastrointestinal, spinal, and other abnormalities were observed in CuO and ZnO nanomaterial exposures at concentrations as low as 3.16 mg L(-1) (ZnO). An EC(50) of 10.3 mg L(-1) ZnO was observed for total malformations. The minimum concentration to inhibit growth of tadpoles exposed to CuO or ZnO nanomaterials was 10 mg L(-1). The results indicate that select nanomaterials can negatively affect amphibians during development. Evaluation of nanomaterial exposure on vertebrate organisms are imperative to responsible production and introduction of nanomaterials in everyday products to ensure human and environmental safety.

  15. Preparation of Advanced CuO Nanowires/Functionalized Graphene Composite Anode Material for Lithium Ion Batteries

    Directory of Open Access Journals (Sweden)

    Jin Zhang

    2017-01-01

    Full Text Available The copper oxide (CuO nanowires/functionalized graphene (f-graphene composite material was successfully composed by a one-pot synthesis method. The f-graphene synthesized through the Birch reduction chemistry method was modified with functional group “–(CH25COOH”, and the CuO nanowires (NWs were well dispersed in the f-graphene sheets. When used as anode materials in lithium-ion batteries, the composite exhibited good cyclic stability and decent specific capacity of 677 mA·h·g−1 after 50 cycles. CuO NWs can enhance the lithium-ion storage of the composites while the f-graphene effectively resists the volume expansion of the CuO NWs during the galvanostatic charge/discharge cyclic process, and provide a conductive paths for charge transportation. The good electrochemical performance of the synthesized CuO/f-graphene composite suggests great potential of the composite materials for lithium-ion batteries anodes.

  16. Preparation of Advanced CuO Nanowires/Functionalized Graphene Composite Anode Material for Lithium Ion Batteries

    Science.gov (United States)

    Zhang, Jin; Wang, Beibei; Zhou, Jiachen; Xia, Ruoyu; Chu, Yingli; Huang, Jia

    2017-01-01

    The copper oxide (CuO) nanowires/functionalized graphene (f-graphene) composite material was successfully composed by a one-pot synthesis method. The f-graphene synthesized through the Birch reduction chemistry method was modified with functional group “–(CH2)5COOH”, and the CuO nanowires (NWs) were well dispersed in the f-graphene sheets. When used as anode materials in lithium-ion batteries, the composite exhibited good cyclic stability and decent specific capacity of 677 mA·h·g−1 after 50 cycles. CuO NWs can enhance the lithium-ion storage of the composites while the f-graphene effectively resists the volume expansion of the CuO NWs during the galvanostatic charge/discharge cyclic process, and provide a conductive paths for charge transportation. The good electrochemical performance of the synthesized CuO/f-graphene composite suggests great potential of the composite materials for lithium-ion batteries anodes. PMID:28772432

  17. Novel-structured electrospun TiO2/CuO composite nanofibers for high efficient photocatalytic cogeneration of clean water and energy from dye wastewater.

    Science.gov (United States)

    Lee, Siew Siang; Bai, Hongwei; Liu, Zhaoyang; Sun, Darren Delai

    2013-08-01

    It is still a challenge to photocatalytically cogenerate clean water and energy from dye wastewater owing to the relatively low photocatalytic efficiency of photocatalysts. In this study, novel-structured TiO2/CuO composite nanofibers were successfully fabricated via facile electrospinning. For the first time, the TiO2/CuO composite nanofibers demonstrated multifunctional ability for concurrent photocatalytic organic degradation and H2 generation from dye wastewater. The enhanced photocatalytic activity of TiO2/CuO composite nanofibers was ascribed to its excellent synergy of physicochemical properties: 1) mesoporosity and large specific surface area for efficient substrate adsorption, mass transfer and light harvesting; 2) red-shift of the absorbance spectra for enhanced light utilization; 3) long nanofibrous structure for efficient charge transfer and ease of recovery, 4) TiO2/CuO heterojunctions which enhance the separation of electrons and holes and 5) presence of CuO which serve as co-catalyst for the H2 production. The TiO2/CuO composite nanofibers also exhibited rapid settleability by gravity and uncompromised reusability. Thus, the as-synthesized TiO2/CuO composite nanofibers represent a promising candidate for highly efficient concurrent photocatalytic organic degradation and clean energy production from dye wastewater. Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. Dispersion state of CuO on CeO2——An incorporation model for the interaction between metal oxide and oxide support

    Institute of Scientific and Technical Information of China (English)

    董林; 金永漱; 陈懿

    1997-01-01

    XRD and XPS are used to study the dispersion state of CuO on ceria surface.The dispersion capacity values of CuO measured by the two methods are consistent,which are of 1.20 mmol CuO/100 m CeO2.In addition,the results reveal that highly dispersed Cu2 + ions are formed at low CuO loadings and that increasing the CuO content to a value higher than its dispersion capacity produces crystalline CuO after the surface vacant sites on CeO2 are filled.The atomic composition of the outermost layer of the CuO/CeO2 samples has been probed by using static secondary ion mass spectroscopy (SSIMS),and the ratios of Cu/Ce are found to be 0.93 and 0.46 for the 1.22 and 0 61 mmol CuO/CeO2 samples respectively.Temperature-programmed reduction (TPR) profile with two reduction peaks at 156 and 16513 suggests that the reduction of highly dispersed Cu2+ ions consists of two steps and is easier than that of CuO crystallites,in which the TPR profile has only one reduction peak at about 249℃.The above experimental results are in

  19. Facile and Mild Strategy to Construct Mesoporous CeO2-CuO Nanorods with Enhanced Catalytic Activity toward CO Oxidation.

    Science.gov (United States)

    Chen, Guozhu; Xu, Qihui; Yang, Ying; Li, Cuncheng; Huang, Taizhong; Sun, Guoxin; Zhang, Shuxiang; Ma, Dongling; Li, Xu

    2015-10-28

    CeO2-CuO nanorods with mesoporous structure were synthesized by a facile and mild strategy, which involves an interfacial reaction between Ce2(SO4)3 precursor and NaOH ethanol solution at room temperature to obtain mesoporous CeO2 nanorods, followed by a solvothermal treatment of as-prepared CeO2 and Cu(CH3COO)2. Upon solvothermal treatment, CuO species is highly dispersed onto the CeO2 nanorod surface to form CeO2-CuO composites, which still maintain the mesoporous feature. A preliminary CO catalytic oxidation study demonstrated that the CeO2-CuO samples exhibited strikingly high catalytic activity, and a high CO conversion rate was observed without obvious loss in activity even after thermal treatment at a high temperature of 500 °C. Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and hydrogen temperature-programmed reduction (H2-TPR) analysis revealed that there is a strong interaction between CeO2 and CuO. Moreover, it was found that the introduction of CuO species into CeO2 generates oxygen vacancies, which is highly likely to be responsible for high catalytic activity toward CO oxidation of the mesoporous CeO2-CuO nanorods.

  20. Formation of hierarchical CuO microcabbages as stable bionic superhydrophobic materials via a room-temperature solution-immersion process

    Science.gov (United States)

    Liu, Jinping; Huang, Xintang; Li, Yuanyuan; Li, Zikun; Chi, Qingbo; Li, Guangyun

    2008-11-01

    A new hierarchical CuO architecture consisting of densely packed nanoplates and nanoribbons was directly fabricated on Cu foils via a room-temperature solution-immersion process. The architectures resembled cabbages both in the shape and structure, and the plates and ribbons served as the leafstalks and leaves of cabbages, respectively. By carefully monitoring the growth stages, it was found that self-assembled CuO nanoplates could be firstly formed on the Cu foils, and then CuO tiny flexible nanoribbons were grown from the edges of fresh plates. The effect of NaOH concentration on the morphology of CuO structures was discussed. Importantly, stable superhydrophobicity (contact angle CA = 155°), independent of pH value of the water droplets, was successfully observed for CuO microcabbages after modification. The wettability of other CuO micro- and nanoscale hierarchical surface structures fabricated using various NaOH concentrations was also presented. The realization of superhydrophobic bionic surfaces with a new hierarchical morphology of CuO will shed new insights in both the synthesis and application fields.

  1. Molecular motor transport through hollow nanowires

    DEFF Research Database (Denmark)

    Lard, Mercy; Ten Siethoff, Lasse; Generosi, Johanna;

    2014-01-01

    Biomolecular motors offer self-propelled, directed transport in designed microscale networks and can potentially replace pump-driven nanofluidics. However, in existing systems, transportation is limited to the two-dimensional plane. Here we demonstrate fully one-dimensional (1D) myosin-driven mot......Biomolecular motors offer self-propelled, directed transport in designed microscale networks and can potentially replace pump-driven nanofluidics. However, in existing systems, transportation is limited to the two-dimensional plane. Here we demonstrate fully one-dimensional (1D) myosin......-driven motion of fluorescent probes (actin filaments) through 80 nm wide, Al2O 3 hollow nanowires of micrometer length. The motor-driven transport is orders of magnitude faster than would be possible by passive diffusion. The system represents a necessary element for advanced devices based on gliding assays...

  2. Dual-core antiresonant hollow core fibers.

    Science.gov (United States)

    Liu, Xuesong; Fan, Zhongwei; Shi, Zhaohui; Ma, Yunfeng; Yu, Jin; Zhang, Jing

    2016-07-25

    In this work, dual-core antiresonant hollow core fibers (AR-HCFs) are numerically demonstrated, based on our knowledge, for the first time. Two fiber structures are proposed. One is a composite of two single-core nested nodeless AR-HCFs, exhibiting low confinement loss and a circular mode profile in each core. The other has a relatively simple structure, with a whole elliptical outer jacket, presenting a uniform and wide transmission band. The modal couplings of the dual-core AR-HCFs rely on a unique mechanism that transfers power through the air. The core separation and the gap between the two cores influence the modal coupling strength. With proper designs, both of the dual-core fibers can have low phase birefringence and short modal coupling lengths of several centimeters.

  3. Permeability of Hollow Microspherical Membranes to Helium

    Science.gov (United States)

    Zinoviev, V. N.; Kazanin, I. V.; Pak, A. Yu.; Vereshchagin, A. S.; Lebiga, V. A.; Fomin, V. M.

    2016-01-01

    This work is devoted to the study of the sorption characteristics of various hollow microspherical membranes to reveal particles most suitable for application in the membrane-sorption technologies of helium extraction from a natural gas. The permeability of the investigated sorbents to helium and their impermeability to air and methane are shown experimentally. The sorption-desorption dependences of the studied sorbents have been obtained, from which the parameters of their specific permeability to helium are calculated. It has been established that the physicochemical modification of the original particles exerts a great influence on the coefficient of the permeability of a sorbent to helium. Specially treated cenospheres have displayed high efficiency as membranes for selective extraction of helium.

  4. Chalcogenide glass hollow core photonic crystal fibers

    Science.gov (United States)

    Désévédavy, Frédéric; Renversez, Gilles; Troles, Johann; Houizot, Patrick; Brilland, Laurent; Vasilief, Ion; Coulombier, Quentin; Traynor, Nicholas; Smektala, Frédéric; Adam, Jean-Luc

    2010-09-01

    We report the first hollow core photonic crystal fibers (HC PCF) in chalcogenide glass. To design the required HC PCF profiles for such high index glass, we use both band diagram analysis to define the required photonic bandgap and numerical simulations of finite size HC PCFs to compute the guiding losses. The material losses have also been taken into account to compute the overall losses of the HC PCF profiles. These fibers were fabricated by the stack and draw technique from TeAsSe (TAS) glass. The fibers we drew in this work are composed of six rings of holes and regular microstructures. Two profiles are presented, one is known as a kagome lattice and the other one corresponds to a triangular lattice. Geometrical parameters are compared to the expected parameters obtained by computation. Applications of such fibers include power delivery or fiber sensors among others.

  5. Nonparaxial Dark-Hollow Gaussian Beams

    Institute of Scientific and Technical Information of China (English)

    GAO Zeng-Hui; L(U) Bai-Da

    2006-01-01

    The concept of nonparaxial dark-hollow Gaussian beams (DHGBs) is introduced. By using the Rayleigh-Sommerfeld diffraction integral, the analytical propagation equation of DHGBs in free space is derived. The on-axis intensity, far-field equation and, in particular, paraxial expressions are given and treated as special cases of our result. It is shown that the parameter f = 1/kw0 with k being the wave number and w0 being the waist width determines the nonparaxiality of DHGBs. However, the parameter range, within which the paraxial approach is valid, depends on the propagation distance. The beam order affects the beam profile and position of maximum on-axis intensity.

  6. Two-piece hollow bulb obturator

    Directory of Open Access Journals (Sweden)

    Subramaniam Elangovan

    2011-01-01

    Full Text Available There are various types of obturator fabrication achievable by prosthodontist. Maxillectomy, which is a term used by head and neck surgeons and prosthodontists to describe the partial or total removal of the maxilla in patients suffering from benign or malignant neoplasms is a defect for which to provide an effective obturator is a difficult task for the maxillofacial prosthodontist. Multidisciplinary treatment planning is essential to achieve adequate retention and function for the prosthesis. Speech is often unintelligible as a result of the marked defects in articulation and nasal resonance. This paper describes how to achieve the goal for esthetics and phonetics and also describes the fabrication of a hollow obturator by two piece method, which is simple and maybe used as definitive obturator for maximum comfort of the patient.

  7. Atomic scale imaging and spectroscopy of a CuO(2) plane at the surface of Bi(2)Sr(2)CaCu(2)O(8+delta).

    Science.gov (United States)

    Misra, S; Oh, S; Hornbaker, D J; DiLuccio, T; Eckstein, J N; Yazdani, A

    2002-08-19

    We have used a scanning tunneling microscope to demonstrate that a single CuO2 plane can form a stable and atomically ordered layer at the surface of Bi(2)Sr(2)CaCu(2)O(8+delta). In contrast to previous studies on high-T(c) surfaces, the CuO2-terminated surface exhibits a strongly suppressed tunneling conductance at low voltages. We consider a number of different explanations for this phenomena and propose that it may be caused by how the orbital symmetry of the CuO2 plane's electronic states affects the tunneling process.

  8. Green synthesis of CuO nanoparticles by aqueous extract of Anthemis nobilis flowers and their catalytic activity for the A³ coupling reaction.

    Science.gov (United States)

    Nasrollahzadeh, Mahmoud; Sajadi, S Mohammad; Rostami-Vartooni, Akbar

    2015-12-01

    CuO nanoparticles (NPs) were prepared by Anthemis nobilis flowers extract as a reducing and stabilizing agent and employed in catalyzing an aldehyde-amine-alkyne coupling reaction. The synthesized CuO NPs was characterized by SEM, EDS, XRD, FT-IR and UV-visible techniques. A diverse range of propargylamines were obtained in a good to high yield. Furthermore, the separation and reuse of CuO NPs was very simple, effective and economical. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Hollow porous-wall glass microspheres for hydrogen storage

    Science.gov (United States)

    Heung, Leung K.; Schumacher, Ray F.; Wicks, George G.

    2010-02-23

    A porous wall hollow glass microsphere is provided having a diameter range of between 1 to 200 microns, a density of between 1.0 to 2.0 gm/cc, a porous-wall structure having wall openings defining an average pore size of between 10 to 1000 angstroms, and which contains therein a hydrogen storage material. The porous-wall structure facilitates the introduction of a hydrogen storage material into the interior of the porous wall hollow glass microsphere. In this manner, the resulting hollow glass microsphere can provide a membrane for the selective transport of hydrogen through the porous walls of the microsphere, the small pore size preventing gaseous or liquid contaminants from entering the interior of the hollow glass microsphere.

  10. Biomimetic synthesis of calcium-strontium apatite hollow nanospheres

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In this work,calcium-strontium apatite (Sr-HA) hollow nanospheres were synthesized by a facile biomimetic method.The structure and property of Sr-HA were characterized by FESEM,TEM,HRTEM,XRD and FT-IR spectroscopy.The influences of different ratios of calcium and strontium on the morphologies of the Sr-HA products were investigated.The experimental results revealed that the hollow spherical Sr-HA,with a size of 30-120 nm in diameter,could be synthesized when the molar ratio of Ca/Sr was 1:1.The possible formation mechanism of the hollow Sr-HA was proposed.The drug release experiments indicated that the hollow spherical Sr-HA had the property of sustained release.

  11. Highly efficient fluorescence sensing with hollow core photonic crystal fibers

    OpenAIRE

    Smolka, Stephan; Barth, Michael; Benson, Oliver

    2008-01-01

    We investigate hollow core photonic crystal fibers for ultra-sensitive fluorescence detection by selectively infiltrating the central hole with fluorophores. Dye concentrations down to 10(-9) M can be detected using only nanoliter sample volumes.

  12. Helly-type Theorems for Hollow Axis-aligned Boxes

    CERN Document Server

    Swanepoel, Konrad J

    2009-01-01

    A hollow axis-aligned box is the boundary of the cartesian product of $d$ compact intervals in R^d. We show that for d\\geq 3, if any 2^d of a collection of hollow axis-aligned boxes have non-empty intersection, then the whole collection has non-empty intersection; and if any 5 of a collection of hollow axis-aligned rectangles in R^2 have non-empty intersection, then the whole collection has non-empty intersection. The values 2^d for d\\geq 3 and 5 for d=2 are the best possible in general. We also characterize the collections of hollow boxes which would be counterexamples if 2^d were lowered to 2^d-1, and 5 to 4, respectively.

  13. Manufacture of hollow ingots using centrifugal casting machines

    Science.gov (United States)

    Pomeshchikov, A. G.; Greneva, T. S.; Baidachenko, V. I.; Berezin, V. I.

    2010-12-01

    Centrifugal machines are proposed for the foundry created at the Almalyk Mining and Smelting Factory in order to produce hollow ingots of a liquid metal made by remelting of consumable electrodes in a refractory accumulating crucible.

  14. Synthesis, characterization and properties of hollow nickel phosphide nanospheres

    Energy Technology Data Exchange (ETDEWEB)

    Ni Yonghong; Tao Ali; Hu Guangzhi; Cao Xiaofeng; Wei Xianwen; Yang Zhousheng [College of Chemistry and Materials Science, Anhui Key Laboratory of Functional Molecular Solids, Anhui Normal University, Wuhu 241000 (China)

    2006-10-14

    Nickel phosphide (Ni{sub 12}P{sub 5}) hollow nanospheres with a mean diameter of 100 nm and a shell thickness of 15-20 nm have been successfully prepared by a hydrothermal-microemulsion route, using NaH{sub 2}PO{sub 2} as a phosphorus source. XRD, EDS (HR)TEM, SEM and the SAED pattern were used to characterize the final product. Experiments showed that the as-prepared nickel phosphide hollow nanospheres could selectively catalytically degrade some organic dyes such as methyl red and Safranine T under 254 nm UV light irradiation. At the same time, the nickel phosphide hollow nanospheres showed a stronger ability to promote electron transfer between the glass-carbon electrode and adrenalin than nickel phosphide honeycomb-like particles prepared by a simple hydrothermal route. A possible formation process for nickel phosphide hollow nanospheres was suggested based on the experimental results.

  15. Preparation of Polyvinylidene Fluoride (PVDF Hollow Fiber Hemodialysis Membranes

    Directory of Open Access Journals (Sweden)

    Qinglei Zhang

    2014-02-01

    Full Text Available In this study, the polyvinylidene fluoride (PVDF hollow fiber hemodialysis membranes were prepared by non-solvent induced phase separation (NIPS. The influences of PVDF membrane thickness and polyethylene glycol (PEG content on membrane morphologies, pore size, mechanical and permeable performance were investigated. It was found that membrane thickness and PEG content affected both the structure and performance of hollow fiber membranes. The tensile strength and rejection of bovine serum albumin (BSA increased with increasing membrane thickness, while the Ultrafiltration flux (UF flux of pure water was the opposite. The tensile strength, porosity and rejection of BSA increased with increasing PEG content within a certain range. Compared with commercial F60S membrane, the PVDF hollow fiber membrane showed higher mechanical and permeable performance. It was proven that PVDF material had better hydrophilicity and lower BSA adsorption, which was more suitable for hemodialysis. All the results indicate that PVDF hollow fiber membrane is promising as a hemodialysis membrane.

  16. Polyazole hollow fiber membranes for direct contact membrane distillation

    KAUST Repository

    Maab, Husnul

    2013-08-07

    Porous hollow fiber membranes were fabricated from fluorinated polyoxadiazole and polytriazole by a dry-wet spinning method for application in desalination of Red Sea water by direct contact membrane distillation (DCMD). The data were compared with commercially available hollow fiber MD membranes prepared from poly(vinylidene fluoride). The membranes were characterized by electron microscopy, liquid entry pressure (LEP), and pore diameter measurements. Finally, the hollow fiber membranes were tested for DCMD. Salt selectivity as high as 99.95% and water fluxes as high as 35 and 41 L m -2 h-1 were demonstrated, respectively, for polyoxadiazole and polytriazole hollow fiber membranes, operating at 80 C feed temperature and 20 C permeate. © 2013 American Chemical Society.

  17. Au-Ag hollow nanostructures with tunable SERS properties

    Science.gov (United States)

    Jiji, S. G.; Gopchandran, K. G.

    2017-01-01

    Fabrication of hollow Au-Ag nanoparticles is done by the sequential action of galvanic replacement and Kirkendall effect. Polyol synthesized silver nanoparticles were used as templates and the size of cavities is controlled by the systematic addition of the HAuCl4. Au-Ag nanoparticles carved in different depths were tested for application as substrates for surface enhanced Raman scattering. Two medically important Raman active analytes-Nile blue chloride and Crystal violet were used in the surface enhanced Raman scattering (SERS) performance analysis. A systematic study has been made on the Raman enhancement of hollow nanoparticles fabricated with different cavity dimensions and compared with that of the silver templates used. The enhancement observed for these hollow substrates with cavities is of interest since Au protected hollow nanostructures are vital and an active area of interest in drug delivery systems.

  18. PYRAMIDAL-HOLLOW-BEAM DIPOLE TRAP FOR ALKALI ATOMS

    Institute of Scientific and Technical Information of China (English)

    YIN JIAN-PING; GAO WEI-JIAN; WANG YU-ZHU; ZHU YI-FU; WANG YI-QIU

    2000-01-01

    We propose a dark gravito-optical dipole trap, for alkali atoms, consisting of a blue-detuned, pyramidal-hollow laser beam propagating upward and the gravity field. When cold atoms from a magneto-optical trap are loaded into the pyramidal-hollow beam and bounce inside the pyramidal-hollow beam, they experience efficient Sisyphus cooling and geometric cooling induced by the pyramidal-hollow beam and the weak repumping beam propagating downward. Our study shows that an ultracold and dense atomic sample with an equilibrium 3D momentum of ~ 3hk and an atomic density above the point of Bose-Einstein condensation may be obtained in this pure optical trap.

  19. Hollow Rotor Progressing Cavity Pump Technique for Oil Production

    Institute of Scientific and Technical Information of China (English)

    Cao Gang

    2002-01-01

    @@ Features of Hollow RotorProgressing Cavity Pump(HRPCP) (1) Keep the path forPCP well-flushing.Clean over the producing wells quickly without shutting off the wells. Heat loss is low while the efficiency is high.

  20. Hollow Nanostructured Anode Materials for Li-Ion Batteries

    Directory of Open Access Journals (Sweden)

    Liu Jun

    2010-01-01

    Full Text Available Abstract Hollow nanostructured anode materials lie at the heart of research relating to Li-ion batteries, which require high capacity, high rate capability, and high safety. The higher capacity and higher rate capability for hollow nanostructured anode materials than that for the bulk counterparts can be attributed to their higher surface area, shorter path length for Li+ transport, and more freedom for volume change, which can reduce the overpotential and allow better reaction kinetics at the electrode surface. In this article, we review recent research activities on hollow nanostructured anode materials for Li-ion batteries, including carbon materials, metals, metal oxides, and their hybrid materials. The major goal of this review is to highlight some recent progresses in using these hollow nanomaterials as anode materials to develop Li-ion batteries with high capacity, high rate capability, and excellent cycling stability.

  1. La_2CuO_4微晶的溶胶-凝胶法制备及合成活化能%Preparation and Activation Energy of La_2CuO_4 Micro-crystallites Synthesized by Sol–Gel Process

    Institute of Scientific and Technical Information of China (English)

    李意峰; 黄剑锋; 曹丽云; 吴建鹏

    2011-01-01

    以硝酸镧和硝酸铜为起始原料、水为溶剂、柠檬酸为络合剂,采用溶胶-凝胶法制备La2CuO4微晶。通过热重-差热分析、X射线衍射、红外光谱和透射电子显微镜等表征前驱物凝胶粉体及La2CuO4粉体的热性能、物相组成、官能团及显微结构,用Kissinger法研究La2CuO4微晶的合成活化能。结果表明采用溶胶-凝胶法可以成功制备La2CuO4微晶:600℃煅烧2h可获得单一物相的La2CuO4;煅烧温度升至700℃后,La2CuO4晶粒形状为正交晶型结构,晶粒尺寸100~120nm,晶粒分布比较均匀。计算得到La2CuO4微晶的合成活化能为147.0kJ/mol。%Micro-crystallite La2CuO4 was prepared via a sol–gel process using lanthanum nitrate and cupric nitrate as raw materials,distilled water as solvent,and citric acid as complexing agent.Thermal properties,phase composition,functional group,and micro-structure of the as-prepared La2CuO4 were characterized by thermogravimetric–differential thermal analysis,X-ray diffraction,infra-red spectroscopy,and transmission electron microscopy.Synthesis activation energy of La2CuO4 was investigated by Kissinger method.Results show that La2CuO4 can be successfully prepared by the sol–gel process,and pure La2CuO4 can be obtained by cal-cining at 600 ℃ for 2 h.When calcination temperature is increased to 700 ℃,the La2CuO4 exhibits an orthogonal structure,the grain distribution is uniform and the size is about 100–120 nm.The preparation activation energy of La2CuO4 is calculated to be 147.0 kJ/mol.

  2. Análises térmicas e processo de sinterização da cerâmica KSr2Nb5O15 dopada com CuO Thermal analysis and sintering process of KSr2Nb5O15 ceramic doped with CuO

    Directory of Open Access Journals (Sweden)

    Delia do Carmo Vieira

    2009-01-01

    Full Text Available KSr2Nb5O15 is a ferroelectric material. The sintering process of the KSr2Nb5O15 ceramic doped with different amounts of CuO was investigated in this research. It was found that CuO is effective as promoter of the densification process of the KSN ceramic. The developed microstructures were different due to the amount of CuO and secondary phases were observed in the microstructures. However, the results of X - ray diffraction showed that only the tetragonal tungsten bronze (TTB structure was identified in all the investigated ceramic systems. The thermal behavior of CuO and also of the CuO - KSN phase mixture was investigated by thermal analysis.

  3. Thermal analysis and sintering process of KSr{sub 2}Nb{sub 5}O{sub 15} ceramic doped with CuO; Analises termicas e processo de sinterizacao da ceramica KSr{sub 2}Nb{sub 5}O{sub 15} dopada com CuO

    Energy Technology Data Exchange (ETDEWEB)

    Vieira, Delia do Carmo; Cardoso, Celso Xavier [Universidade Estadual Paulista (UNESP), Presidente Prudente, SP (Brazil). Fac. de Ciencias e Tecnologia. Dept. de Fisica, Quimica e Biologia], e-mail: dcvieira@fct.unesp.br; Duran, Rafael Matos [Universidad de Oriente, Santiago de Cuba (Cuba). Facultad de Ingenieria Quimica

    2009-07-01

    KSr{sub 2}Nb{sub 5}O{sub 15} is a ferroelectric material. The sintering process of the KSr{sub 2}Nb{sub 5}O{sub 15} ceramic doped with different amounts of CuO was investigated in this research. It was found that CuO is effective as promoter of the densification process of the KSN ceramic. The developed microstructures were different due to the amount of CuO and secondary phases were observed in the microstructures. However, the results of X - ray diffraction showed that only the tetragonal tungsten bronze (TTB) structure was identified in all the investigated ceramic systems. The thermal behavior of CuO and also of the CuO - KSN phase mixture was investigated by thermal analysis. (author)

  4. Facile synthesis of ZnO hollow fibres

    Indian Academy of Sciences (India)

    B T Su; K Wang; X W Zuo; H M Mu; N Dong; Y C Tong; J Bai; Z Q Lei

    2007-12-01

    In this paper, cotton fibres were used as bio-template to successfully synthesize new ceramic materials, ZnO hollow fibres and in an effort to explore the synthesis condition, and simplify the synthesis procedure. In this synthesis, a direct thermal decomposition of zinc acetate dihydrate coated on the surface of cotton fibres was explored. The wall porosity of the ZnO hollow fibres was controlled by changing the concentration of zinc acetate aqueous solution.

  5. Highly efficient fluorescence sensing with hollow core photonic crystal fibers

    DEFF Research Database (Denmark)

    Smolka, Stephan; Barth, Michael; Benson, Oliver

    2008-01-01

    We investigate hollow core photonic crystal fibers for ultra-sensitive fluorescence detection by selectively infiltrating the central hole with fluorophores. Dye concentrations down to 10(-9) M can be detected using only nanoliter sample volumes.......We investigate hollow core photonic crystal fibers for ultra-sensitive fluorescence detection by selectively infiltrating the central hole with fluorophores. Dye concentrations down to 10(-9) M can be detected using only nanoliter sample volumes....

  6. 3D hollow nanostructures as building blocks for multifunctional plasmonics

    KAUST Repository

    De Angelis, Francesco De

    2013-08-14

    We present an advanced and robust technology to realize 3D hollow plasmonic nanostructures which are tunable in size, shape, and layout. The presented architectures offer new and unconventional properties such as the realization of 3D plasmonic hollow nanocavities with high electric field confinement and enhancement, finely structured extinction profiles, and broad band optical absorption. The 3D nature of the devices can overcome intrinsic difficulties related to conventional architectures in a wide range of multidisciplinary applications. © 2013 American Chemical Society.

  7. Laser-plasma-based linear collider using hollow plasma channels

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, C.B., E-mail: CBSchroeder@lbl.gov; Benedetti, C.; Esarey, E.; Leemans, W.P.

    2016-09-01

    A linear electron–positron collider based on laser-plasma accelerators using hollow plasma channels is considered. Laser propagation and energy depletion in the hollow channel is discussed, as well as the overall efficiency of the laser-plasma accelerator. Example parameters are presented for a 1-TeV and 3-TeV center-of-mass collider based on laser-plasma accelerators.

  8. Monodisperse Hollow Tricolor Pigment Particles for Electronic Paper

    Directory of Open Access Journals (Sweden)

    Meng Xianwei

    2009-01-01

    Full Text Available Abstract A general approach has been designed to blue, green, and red pigments by metal ions doping hollow TiO 2. The reaction involves initial formation of PS at TiO2 core–shell nanoparticles via a mixed-solvent method, and then mixing with metal ions solution containing PEG, followed calcining in the atmosphere. The as-prepared hollow pigments exhibit uniform size, bright color, and tunable density, which are fit for electronic paper display.

  9. Thin-walled reinforcement lattice structure for hollow CMC buckets

    Energy Technology Data Exchange (ETDEWEB)

    de Diego, Peter

    2017-06-27

    A hollow ceramic matrix composite (CMC) turbine bucket with an internal reinforcement lattice structure has improved vibration properties and stiffness. The lattice structure is formed of thin-walled plies made of CMC. The wall structures are arranged and located according to high stress areas within the hollow bucket. After the melt infiltration process, the mandrels melt away, leaving the wall structure to become the internal lattice reinforcement structure of the bucket.

  10. The role of Cu-O bond length fluctuations in the high temperature superconductivity mechanism

    Science.gov (United States)

    Deutscher, Guy

    2012-06-01

    We review three different kinds of experiments that emphasize the non-BCS, inhomogeneous aspects of superconductivity in the high Tc cuprates. The first is the existence of two different energy scales in the superconducting state, initially identified by a comparison between tunneling and Andreev-Saint-James spectroscopies [Deutscher, Nature (London) 397, 410 (1999)]. The second are EXAFS measurements of the Cu-O bond length distribution, which have shown that below a temperature T* > Tc, it becomes broader than expected from the Debye-Waller broadening and presents a split [Bianconi et al., Phys. Rev. Lett. 76, 3412 (1996)]. The third one is the effect of frozen lattice disorder on critical current and vortex pinning, which profoundly affects the pairing landscape [Gutierrez et al., Nature Mater. 6, 367 (2007)]. We then discuss how these results fit with models in which the electron-lattice interaction plays a leading role.

  11. Magnetization study of mercurocuprate (Hg,Re)Sr2CuO4+

    Indian Academy of Sciences (India)

    S Balamurugan; I K Gopalakrishnan; J V Yakhmi; P Selvam

    2002-05-01

    The nominal (Hg1-Re)Sr2CuO4+ ( = 0.10 and 0.20) samples were synthesized at ∼ 920° C in partial vacuum. The compound with =0.10 exhibits superconductivity at ∼ 54 K while the composition = 0.20 is non-superconducting down to 5 K. On cooling below 10 K in an applied field of 4 kOe, the former causes a noticeable upturn in the field cooled (FC) magnetization signal. Such a change in magnetic response is also reflected in the magnetic hysteresis loop generated at 9 K. We attribute this effect to a paramagnetic contribution arising from Re in (Hg,Re)-1201 phase.

  12. Study of structural and optical properties of Fe doped CuO nanoparticles

    Science.gov (United States)

    Rani, Poonam; Gupta, Ankita; Kaur, Sarabjeet; Singh, Vishal; Kumar, Sacheen; Kumar, Dinesh

    2016-05-01

    Iron doped Copper oxide nanoparticles were synthesized by the co-precipitation method at different concentration (3%, 6%, 9%) at 300-400° C with Copper Acetate and Ferric Chloride as precursors in presence of Polyethylene Glycol and Sodium Hydroxide as stabilizing agent. Effect of doping on the structural and optical properties is studied. The obtained nanoparticles were characterized by X-Ray Diffraction and UV-Visible Spectroscopy for examining the size and the band gap respectively. The X-Ray Diffraction plots confirmed the monoclinic structure of Copper oxide suggesting the Cu atoms replaced by Fe atoms and no secondary phase was detected. The indirect band gap of Fe doped CuO nanoparticles is 2.4eV and increases to 3.4eV as the concentration of dopant increases. The majority of particle size is in range 8 nm to 35.55 nm investigated by X-ray diffractometer.

  13. Effect of particle size on the exchange bias of Fe-doped CuO nanoparticles

    Science.gov (United States)

    Yin, S. Y.; Yuan, S. L.; Tian, Z. M.; Liu, L.; Wang, C. H.; Zheng, X. F.; Duan, H. N.; Huo, S. X.

    2010-02-01

    Effect of particle size on exchange bias in Fe-doped CuO nanoparticles is investigated, which are sintered at different temperatures from 350 to 650 °C, respectively. The structure and magnetic properties for different particle size samples were probed. It is found that the system shows magnetic properties transition from paramagnetic to ferromagnetic with increasing grain size, and exhibits the variations in exchange bias field (HEB) and coercivity (HC) at low temperature after field-cooled from 300 K. With the increase in the particles size, HEB decreases monotonously. Furthermore, vertical magnetization shift was also observed for the small particles. Exchange bias is attributed to the exchange coupling interactions between ferromagnetic and spin-glass-like (or antiferromagnetic) phase interface layers.

  14. SnO2: CuO based hydrogen sulphide sensor on LTCC substrates

    Science.gov (United States)

    Kaur, Manmeet; Ganapathi, S. Kailasa; Chaware, Varsha; Rane, Vivek; Ramgir, Niranjan; Datta, Niyanta; Giramkar, Vijaya; Phatak, Girish; Aswal, D. K.; Gupta, S. K.

    2012-06-01

    Dependence of the resistance of metal-oxides thin films on environment is generally used to detect toxic gases at ppm levels. In order to obtain a fast response and recovery, sensing films are heated to high temperatures (upto 300°C). The heater assembly used to raise the film temperature not only makes the sensor bulky but also consumes high power. In our efforts to reduce the size of sensors, we have deposited SnO2: CuO thin film directly onto low-temperature co-fired ceramic (LTCC) substrates with integrated heater and temperature sensor. Sensor films were investigated for their compatibility with LTCC substrate and results show a stable response towards hydrogen sulphide gas for over a year. The stability of heater and thermistor embedded in LTCC substrate has also been monitored. The results of our study show films on LTCC substrate can be successfully applied in sensor technology.

  15. Ultrasonication Assisted Production of Biodiesel from Sunflower Oil by Using CuO: Mg Heterogeneous Nanocatalyst

    Science.gov (United States)

    Varghese, Rintu; Jose, Sony; Joyprabu, H.; Johnson, I.

    2017-08-01

    Biodiesel is a clean, renewable, biodegradable, eco-friendly and alternative fuel used in the diesel engine. The present work was carried out at constant operational conditions such as methanol to oil molar ratio 6:1, catalyst concentration 0.25%, 30 minute reaction time and the reaction temperature at 60°C. Biodiesel was synthesized by transesterification of sunflower oil (SFO) with methanol, using CuO: Mgas nanocatalyst. This nanocatalyst was prepared by quick precipitation method. The biodiesel yield of 71.78% was achieved under reaction condition. The presence of methyl ester groups at the produced biodiesel was confirmed using the Gas Chromatography-Mass Spectrometry (GC-MS). The FAME conversion yield up to 82.83 % could be obtained under the operating conditions.

  16. Stripe correlations in La 1.875Ba 0.125CuO 4

    Science.gov (United States)

    Fujita, M.; Goka, H.; Tranquada, J. M.; Yamada, K.

    2004-08-01

    We have performed neutron scattering measurements on the single crystal of La 1.875Ba 0.125CuO 4 in order to study the melting sequence of stripe correlations. Low-energy incommensurate spin fluctuations clearly are observed around (π,π) at low temperatures and remain even above the stripe ordering temperature of 50 K. However, the peak intensity dramatically degrades toward the structural transition temperature between low-temperature tetragonal and low-temperature orthorhombic phases, Td2, of 60 K. No well-defined signal was observed above Td2. These results suggest that the charge fluctuations, which are closely related with the crystal structure, modify the magnetic correlations as expected from the stripe model.

  17. ELECTROCHEMICAL OXIDATION OF La2CuO4 SINGLE CRYSTALS

    Institute of Scientific and Technical Information of China (English)

    Chen Ling; Huang Yu-zhen; Zhou Fang; Dong Cheng; Che Guang-can; Zhao Zhong-xian

    2000-01-01

    Bulk superconducting La2CuO4+ single crystals are obtained byusing electrochemical intercalation technique from the as-growninsulating samples. Oxidation is carried out by constant currentI=10 at temperature T=70 and room temperature, respectively. Structure and magnetic properties are studied by low-temperature X-ray diffraction and susceptibility measurements. A superconducting phase with Tc of 19K and -0.12 can be attributed to the formation of oxygen clusters. Room temperature oxidation is inhomogeneous: two superconducting phases with T c1 of 24K and Tc2 of 8K and an antiferromagnetic phase are coexisting in the crystal. It is found that the appearance of Tc in this system has the step tendency.

  18. Photoemission study of CuO and Cu sub 2 O single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Z. (Stanford Electronics Laboratory, Stanford University, Stanford, CA (USA)); List, R.S. (Los Alamos National Laboratory, Los Alamos, NM (USA)); Dessau, D.S. (Stanford Electronics Laboratory, Stanford University, Stanford, CA (USA)); Parmigiani, F. (IBM Almaden Research Center, San Jose, CA (USA)); Arko, A.J.; Bartlett, R. (Los Alamos National Laboratory, Los Alamos, NM (USA)); Wells, B.O.; Lindau, I.; Spicer, W.E. (Stanford Electronics Laboratory, Stanford University, Stanford, CA (USA))

    1990-11-01

    We present results of resonant-photoemission and high-resolution x-ray-photoemission-spectroscopy (XPS) studies on single-crystalline CuO, which confirms most of the earlier data obtained from polycrystalline samples. However, some minor differences with earlier results were also observed, which are concentrated on a mainly oxygen-related feature. The important first ionization state is much better resolved in our high-resolution XPS data, and is found to have both copper and oxygen orbital character. This is consistent (though not a proof) with the theoretical prediction that the first ionization state is a {sup 1}{ital A}{sub 1{ital g}} singlet with holes on both oxygen and copper sites. The 16-eV satellite is found to show a Cu antiresonance, and is assigned to a {sup 1}{ital A}{sub 1{ital g}} singlet with both holes on the copper sites.

  19. Photonic Sintering of Copper through the Controlled Reduction of Printed CuO Nanocrystals.

    Science.gov (United States)

    Paglia, Francesco; Vak, Doojin; van Embden, Joel; Chesman, Anthony S R; Martucci, Alessandro; Jasieniak, Jacek J; Della Gaspera, Enrico

    2015-11-18

    The ability to control chemical reactions using ultrafast light exposure has the potential to dramatically advance materials and their processing toward device integration. In this study, we show how intense pulsed light (IPL) can be used to trigger and modulate the chemical transformations of printed copper oxide features into metallic copper. By varying the energy of the IPL, CuO films deposited from nanocrystal inks can be reduced to metallic Cu via a Cu2O intermediate using single light flashes of 2 ms duration. Moreover, the morphological transformation from isolated Cu nanoparticles to fully sintered Cu films can also be controlled by selecting the appropriate light intensity. The control over such transformations enables for the fabrication of sintered Cu electrodes that show excellent electrical and mechanical properties, good environmental stability, and applications in a variety of flexible devices.

  20. Template free synthesis of mesoporous CuO nano architects for field emission applications.

    Science.gov (United States)

    Das, Swati; Maiti, Soumen; Saha, Subhajit; Das, Nirmalya Sankar; Chattopadhyay, Kalyan Kumar

    2013-04-01

    Cupric oxide mesospheres composed of its nanoparticles have been synthesized by a simple template free chemical route at different temperatures. Thermal aging followed by higher temperature (350 degrees C, 6 hours) annealing on these architects transformed them into hollow mesospheres consisting of sharp needle like structures with high aspect ratio (- 10(3)). A detailed analysis of field emission scanning electron microscopy confirmed a uniform registry of the prepared nanostructures. High resolution transmission electron microscopy showed that the as-grown mesospheres have hollow inner cavity with a thin outer shell. X-ray photoelectron spectroscopic analysis showed no obvious changes in the chemical composition of the nanostructures after annealing, confirming that the elements in the final products were in the proper oxidation states. Electron emission under electric field was investigated from these interesting structures. It was found that both of these nanostructures showed electron emission, but emission performance of the hollow mesospheres consisting of nanoneedles exhibited excellent performance with turn-on field as low as 2.8 V/microm and high enhancement factor (beta) - 5537.

  1. Preparation of Hollow Porous HAP Microspheres as Drug Delivery Vehicles

    Institute of Scientific and Technical Information of China (English)

    WANG Qing; HUANG Wenhai; WANG Deping

    2007-01-01

    Hollow HAP microspheres in sub-millimeter size were prepared and investigated as a drug delivery vehicle. The LCB (lithium-calcium borate) glass microspheres, which were made through flame spray process, were chosen as precursor for hollow HAP microspheres. The LCB glass microspheres reacted with phosphate buffer (K2HPO4) solution for 5 days at 37 ℃. During the reaction the Ca-P-OH compound precipitated on the surface of LCB glass microspheres and formed porous shells. Then the microspheres turned to be hollow ones with the same diameter as the glass microspheres after LCB glass run out in the chemical reaction. After heat-treated at 600 ℃ for 4 h, the Ca-P-OH compound became HAP, thus the hollow HAP microspheres were produced. The mechanism of forming hollow HAP microspheres through the chemical reaction between phosphate buffer and LCB glass was confirmed by the XRD analysis. The microstructure characteristics of the hollow, porous microspheres were observed by SEM.

  2. Formation and Characterization of CdS Hollow Structures

    Institute of Scientific and Technical Information of China (English)

    HU Peng; YU Haihu; DENG Jinyang; JIANG Desheng

    2008-01-01

    CdS hollow structures were built up by using the one pot method and using carbon disulfide (CS2) and ethylenediamine as starting materials. CS2 is insoluble in water and could form metastable oil droplets in the water at a moderate temperature. The oil droplets formed chains in the circumvolving water. CdS crystals grew and mineralized on the surfaces of the CS2 droplet chains, forming CdS shells around the unreacted CS2 cores. After the surrounding temperature was raised above the boiling point of CS2, the unreacted CS2 cores vaporized, leaving the CdS shelled hollow structures. The CdS hollow structures were characterized by using a transmission electron microscope, an X-ray diffractometer, a UV-Visible spectrophotometer and a fluorescence spectrophotometer. The CdS hollow structures were mainly tubes with closed ends. The exterior diameter and the interior diameter of tubes were about 50nm and about 15nm, respectively. Compared with the absorption onset wavelength of the bulk CdS, the CdS hollow structures exhibited a blue shift of about 57nm. While excited at 213nm. the CdS hollow structures emitted greenish blue light centered at 470nm.

  3. Suppressing the cytotoxicity of CuO nanoparticles by uptake of curcumin/BSA particles

    Science.gov (United States)

    Zhang, Wenjing; Jiang, Pengfei; Chen, Ying; Luo, Peihua; Li, Guanqun; Zheng, Botuo; Chen, Wei; Mao, Zhengwei; Gao, Changyou

    2016-05-01

    The adverse effects of metal-based nanoparticles on human beings and the environment have received extensive attention recently. It is urgently required to develop a simple and effective method to suppress the toxicity of metal-based nanomaterials. In this study, a hydrophobic antioxidant and a chelation agent curcumin (CUR) were encapsulated into bovine serum albumin (BSA) particles by a simple co-precipitation method, and followed by glutaraldehyde cross-linking. The CUR/BSA particles had an average size of 300 nm in diameter with a negatively charged surface and sustained curcumin release properties. The cellular uptake and cytotoxicity of CUR/BSA particles were followed on A549 cells, HepG2 cells and RAW264.7 cells. The CUR/BSA particles had higher intracellular accumulation and lower cytotoxicity compared with the free curcumin at the same drug concentration. The CUR/BSA particles could suppress the cytotoxicity generated by CuO nanoparticles as a result of decrease of both the intracellular reactive oxygen species (ROS) level and Cu2+ concentration, while the free curcumin did not show any obvious detoxicating effect. The detoxicating effects of CUR/BSA particles were further studied in an intratracheal instillation model in vivo, demonstrating significant reduction of toxicity and inflammatory response in rat lungs induced by CuO nanoparticles. The concept-proving study demonstrates the potential of the CUR/BSA particles in suppressing cytotoxicity of metal-based nanomaterials, which is a paramount requirement for the safe application of nanotechnology.

  4. Kinetics of carbon monoxide oxidation over modified supported CuO catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Loc, Luu Cam; Tri, Nguyen; Cuong, Hoang Tien; Thoang, Ho Si [Vietnam Academy of Science and Technology (VAST), Ho Chi Minh City (Viet Nam). Inst. of Chemical Technology; Agafonov, Yu.A.; Gaidai, N.A.; Lapidus, A.L. [Russian Academy of Sciences, Moscow (Russian Federation). N.D. Zelinsky Institute of Organic Chemistry

    2013-11-01

    The following supported on {gamma}-Al{sub 2}O{sub 3} catalysts: 10(wt.)%CuO (CuAl), 10%CuO+10%Cr{sub 2}O{sub 3} (CuCrAl) and 10%CuO+20%CeO{sub 2} (CuCeAl) were under the investigation. Physico-chemical characteristics of the catalysts were determined by the methods of BET, X-ray Diffraction (XRD), and Temperature-Programmed Reduction (TPR). A strong interaction of copper with support in CuAl resulted in the formation of low active copper aluminates. The bi-oxide CuCrAl was more active than CuAl owing to the formation of high catalytically active spinel CuCr{sub 2}O{sub 4}. The fact of very high activity of the sample CuCeAl can be explained by the presence of the catalytically active form of CuO-CeO{sub 2}-Al{sub 2}O{sub 3}. The kinetics of CO total oxidation was studied in a gradientless flow-circulating system at the temperature range between 200 C and 270 C. The values of initial partial pressures of carbon monoxide (P{sup o}{sub CO}), oxygen (P{sup o}{sub O2}), and specially added carbon dioxide (P{sup o}{sub CO{sub 2}}) were varied in ranges (hPa): 10 / 45; 33 / 100, and 0 / 30, respectively. (orig.)

  5. Oxygen hole pairing in CuO2 planes : a quasi-one dimensional case

    Science.gov (United States)

    Feinberg, D.; Avignon, M.; Boiron, M.; Chakraverty, B. K.

    A possible mechanism of pairing of oxygen holes produced on doping is investigated. These holes are formed due to strong correlation energy on copper sites. In a simplified CuO2-sheet band structure, they are showed to take place in a narrow p-oxygen band originating from the broadening of a non-bonding p-oxygen level by direct O-O transfer. Such a band shows a quasi-one-dimensional density of states N (E) ˜ E- 1/2, which strongly enhances BCS-type pairing. Tc is evaluated for both s and d pairing and varies as tλ 2 where λ is the coupling constant and t the O-O transfer integral. On examine la possibilité d'appariement de trous sur les oxygènes, produits lors du dopage. Ces trous sont formés du fait des fortes corrélations sur les sites de cuivre. Dans une structure de bande simplifiée, pour les plans CuO2, on montre qu'ils se forment dans une étroite bande p d'oxygène issue de l'élargissement d'un niveau p non-liant par transfert direct O-O. Une telle bande possède une densité d'états quasi-unidimensionnelle N (E) ˜ E-1/2, ce qui favorise fortement l'appariement de type BCS. Tc est évaluée dans le cas d'un appariement s et d et varie comme tλ2 où λ est la constante de couplage et t l'intégrale de transfert O-O.

  6. Hetero-metal cation control of CuO nanostructures and their high catalytic performance for CO oxidation

    Science.gov (United States)

    Huang, Hongwen; Zhang, Liqiang; Wu, Kewei; Yu, Qing; Chen, Ru; Yang, Hangsheng; Peng, Xinsheng; Ye, Zhizhen

    2012-11-01

    A controllable synthesis of various morphologies of CuO nanostructures with tuning by hetero-metal cations has been developed in aqueous solution at room temperature. The morphologies of CuO can be engineered from nanosheets to nanoparticles with different length ratios of the long axis to the short axis. The formation of many metal-ion complexes plays an important role in slowing the release rate of OH- and affects the reaction kinetics further. We found that the effect of hetero-metal cations on the final morphology of the CuO nanostructures was the same as that of the cooling temperature. A series of temperature-controlled experiments demonstrated this. Furthermore, among all the synthesized CuO nanostructures, the fascinating colloidal mesoporous CuO quasi-monocrystalline nanosheets prepared at 25 °C with a thickness of ca. 10 nm and large specific surface area of 80.32 m2 g-1 is investigated intensively. These CuO nanosheets demonstrate a superior catalytic activity for CO oxidation, with features of high CO conversion efficiency (47.77 mmolCO g-1CuO h-1 at 200 °C), which is close to that reported for previously investigated supported-CuO catalysts, and a low apparent activation energy Ea (53.3 kJ mol-1).A controllable synthesis of various morphologies of CuO nanostructures with tuning by hetero-metal cations has been developed in aqueous solution at room temperature. The morphologies of CuO can be engineered from nanosheets to nanoparticles with different length ratios of the long axis to the short axis. The formation of many metal-ion complexes plays an important role in slowing the release rate of OH- and affects the reaction kinetics further. We found that the effect of hetero-metal cations on the final morphology of the CuO nanostructures was the same as that of the cooling temperature. A series of temperature-controlled experiments demonstrated this. Furthermore, among all the synthesized CuO nanostructures, the fascinating colloidal mesoporous CuO

  7. 氧含量对Pr1.85Ce0.15CuO4-x和Pr2CuO4-x结构、磁性和超导电性的影响%Effects of Oxygen Content on Structure,Magnetic Properties and Superconductivity of Pr185sCe0.15CuO4-x and Pr2Cu04-x System

    Institute of Scientific and Technical Information of China (English)

    王法社; 赵勇

    2010-01-01

    通过固相反应法制备了电子型Pr1.85Ce0.15CuO4-x和其母体Pr2CuO4-x.X射线衍射表明:制备的样品具有单相结构,杂相比较少.磁测量的结果表明:在Pr1.85Ce0.15CuO4-x中,0.05≤x≤0.20(质量分数,%,下同)时具有超导电性,起始转变温度Tc=24.5 K.而Pr2CuO4-x仅仅通过调节氧含量不能实现超导.并且通过氧含量对Pr1.85Ce0.15CuO4-x和Pr2CuO4-x结构、磁性的不同影响的对比研究发现,在Pr1.85Ce0.15CuO4-x中通过调节氧含量实现超导的原因是引入自由载流子.Pr2CuO4-x不能实现超导的原因是氧空位出现在不同的氧位上,并对相关机制进行了探讨.

  8. Subsolidus Phase Relations of the CaO-WO3-CuO System at 800 °C in Air

    DEFF Research Database (Denmark)

    Grivel, J. -C.

    2012-01-01

    The subsolidus phase relations of the CaO-WO3-CuO system were investigated in air. The samples were equilibrated at 800 degrees C. Under these conditions, five binary oxide phases are stable: Ca2CuO3, Cu3WO6, CuWO4, CaWO4 and Ca3WO6. The pseudo-ternary section is characterised by 6 three-phase re......The subsolidus phase relations of the CaO-WO3-CuO system were investigated in air. The samples were equilibrated at 800 degrees C. Under these conditions, five binary oxide phases are stable: Ca2CuO3, Cu3WO6, CuWO4, CaWO4 and Ca3WO6. The pseudo-ternary section is characterised by 6 three...

  9. Green synthesis of CuO nanoparticles loaded on the seashell surface using Rumex crispus seeds extract and its catalytic applications for reduction of dyes.

    Science.gov (United States)

    Rostami-Vartooni, Akbar

    2017-06-01

    In this study, CuO nanoparticles supported on the seashell (CuO NPs/seashell) was prepared using Rumex crispus seeds extract as a chelating and capping agent. The prepared nanocomposite was characterised by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy and transmission electron microscopy. The particle size of CuO NPs on the seashell sheets was in the range of 8-60 nm. Catalytic ability of CuO NPs/seashell was investigated for the reduction of 4-nitrophenol (4-NP) and Congo red (CR). It was observed that catalyst can be easily recovered and reused several times without any significant loss of catalytic efficiency.

  10. Low temperature synthesis of carbon-wrapped CuO synthesized without using a conventional carbon source for Li ion battery application

    Science.gov (United States)

    Saravanan, M.; Nair, Shantikumar V.; Rai, Alok Kumar

    2017-10-01

    Carbon-wrapped CuO is synthesized by a facile pyro-synthesis method without using a conventional carbon source to overcome the capacity fading issue of CuO nanoparticles. The microstructure analysis shows that the sample is fully wrapped by a carbon layer. The resultant carbon-wrapped CuO nanocomposite as an anode exhibits high reversible capacity with excellent cycling stability (437.1 mAh/g at 0.25 C and 365.2 mAh/g at 1.0 C after 100 cycles) and good rate capability. It is believed that the synergistic effect of CuO and carbon is responsible for the enhanced electrochemical performance of the nanocomposite electrode.

  11. Electron-beam irradiation induced transformation of Cu2(OH)3NO3 nanoflakes into nanocrystalline CuO

    Science.gov (United States)

    Padhi, S. K.; Gottapu, S. N.; Krishna, M. Ghanashyam

    2016-05-01

    The transmission electron microscope electron-beam (TEM e-beam) as a material modification tool has been demonstrated. The material modification is realised in the high-resolution TEM mode (largest condenser aperture, 150 μm, and 200 nm spot size) at a 200 keV beam energy. The Cu2(OH)3NO3 (CHN) nanoflakes used in this study were microwave solution processed that were layered single crystals and radiation sensitive. The single domain CHN flakes disintegrate into a large number of individual CuO crystallites within a 90 s span of time. The sequential bright-field, dark-field, and selected area electron diffraction modes were employed to record the evolved morphology, microstructural changes, and structural transformation that validate CHN modification. High-resolution transmission electron microscopy imaging of e-beam irradiated regions unambiguously supports the growth of CuO nanoparticles (11.8(3.2) nm in diameter). This study demonstrates e-beam irradiation induced CHN depletion, subsequent nucleation and growth of nanocrystalline CuO regions well embedded in the parent burnt porous matrix which can be useful for miniaturized sensing applications. NaBH4 induced room temperature reduction of CHN to elemental Cu and its printability on paper was also demonstrated.The transmission electron microscope electron-beam (TEM e-beam) as a material modification tool has been demonstrated. The material modification is realised in the high-resolution TEM mode (largest condenser aperture, 150 μm, and 200 nm spot size) at a 200 keV beam energy. The Cu2(OH)3NO3 (CHN) nanoflakes used in this study were microwave solution processed that were layered single crystals and radiation sensitive. The single domain CHN flakes disintegrate into a large number of individual CuO crystallites within a 90 s span of time. The sequential bright-field, dark-field, and selected area electron diffraction modes were employed to record the evolved morphology, microstructural changes, and structural

  12. Histopathological effects following short-term coexposure of Cyprinus carpio to nanoparticles of TiO2 and CuO.

    Science.gov (United States)

    Mansouri, Borhan; Maleki, Afshin; Davari, Behroz; Johari, Seyed Ali; Shahmoradi, Behzad; Mohammadi, Ebrahim; Shahsavari, Siros

    2016-10-01

    The aim of this research was to investigate the coexposure of nanoparticles of titanium dioxide (TiO2) and copper oxide (CuO) on the alterations of the gill, intestine, kidney, and liver tissues of carps (Cyprinus carpio). In this study, carps (length 23 ± 1.5 cm; weight 13 ± 1.3 g) were divided into six groups of 15 each and exposed to 2.5 and 5.0 mg L(-1) of CuO nanoparticles (NPs), 10.0 mg L(-1) of TiO2 NPs, and 2.5 and 5.0 mg L(-1) of CuO NPs + 10.0 mg L(-1) of TiO2 NP mixture. Fish were sampled for histopathological studies after hematoxylin-eosin staining. Results indicated that the more kinds of histopathology anomalies observed with CuO NP and TiO2 NP mixture were broadly of the same type as CuO NPs and TiO2 NPs alone, but the severity or incidence of injuries of gill, intestine, liver, and kidney of carps in the mixture of CuO NPs + TiO2 NPs was higher than that of each NP alone. Moreover, behavioral changes in carps exposed to CuO NP and TiO2 NP mixture such as hyperactivity, loss of balance, and convulsions were higher than those to CuO NPs and TiO2 NPs alone. In conclusion, the presence of TiO2 NPs enhanced the effects of NPs of copper oxide in terms of histopathological changes in carps.

  13. Analysis of Anti-Wear Properties of CuO Nanoparticles as Friction Modifiers in Mineral Oil (460cSt Viscosity Using Pin-On-Disk Tribometer

    Directory of Open Access Journals (Sweden)

    S. Bhaumik

    2015-06-01

    Full Text Available The present work investigated the anti-wear properties of CuO nanoparticles based mineral oil using pin-on-disk apparatus. The pin material selected was EN 24(untreated as it is used in gear manufacturing. Commonly used graphite macro particles (wt.% and CuO nanoparticles(wt.% were used as additives. It had been observed that the additives based mineral oil samples exhibited superior antiwear properties than pure mineral oil. Both CuO nanoparticles (0.2 wt.% and graphite (0.2 wt.% based lubricant showed significant decrease in coefficient of friction and specific wear rate. There was a reduction in both coefficient of friction (28.5 % approx. and specific wear rate (70 % approx. in case of CuO nanolubricants and graphite based mineral oil as compared with the pure mineral oil.Flash-fire point, viscosity and viscosity index also increased with the increase in additive concentration. The surface characteristics of the pin were studied using Scanning Electron Microscope (SEM and surface roughness tester. The SEM images showed more rough surfaces in case of pure mineral oil samples as compared with graphite and CuO nanoparticles based samples. The surface roughness values of the pins in case of graphite (0.2 wt.% and CuO nano particles (0.2 wt.% based lubricant were much lesser than pure mineral oil. From the results predicted minimum 0.2 wt.% CuO nanoparticles were required to enhance the antiwear property of the lubricant. This work aimed in bringing a comparative experimental analysis using CuO nanoparticles and commonly used graphite macro particles as lubricant additives on various properties such as viscosity, flash point, fire point, surface roughness and anti-wear properties. Thus, the work would be useful in developing new nano lubricants with minimum additive concentration.

  14. Self-assembled synthesis of hierarchical nanostructured CuO with various morphologies and their application as anodes for lithium ion batteries

    Science.gov (United States)

    Xiang, J. Y.; Tu, J. P.; Zhang, L.; Zhou, Y.; Wang, X. L.; Shi, S. J.

    We report a simple self-assembled synthesis of hierarchical CuO particles with various morphologies such as leaf, shuttle, flower, dandelion, and caddice clew. The morphologies can be easily tailored by adjusting the pH value. The synthesis is based on dehydration and re-crystallization of precursor Cu(OH) 2 nanowires. [Cu(NH 3) 4] 2+ and OH - in the solutions are considered as the key factors to influence the assembling manner of CuO. The obtained hierarchical CuO particles serve as a good model system for the study as anodes for lithium ion batteries. Various morphologies of CuO particles result in different electrochemical performances of electrodes. Compared to others, dandelion-like and caddice clew-like CuO exhibit reversible discharge capacities of 385 mAh g -1 and 400 mAh g -1 at 0.1 C, 340 mAh g -1 and 374 mAh g -1 at 0.5 C after 50 cycles, respectively. The higher discharge capacities and better cycling performances are attributed to their larger surface area and porosity, leading to better contact between CuO and electrolyte and shorter diffusion length of lithium ions.

  15. Self-assembled synthesis of hierarchical nanostructured CuO with various morphologies and their application as anodes for lithium ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Xiang, J.Y.; Tu, J.P.; Zhang, L.; Zhou, Y.; Wang, X.L.; Shi, S.J. [State Key Laboratory of Silicon Materials and Department of Materials Science and Engineering, Zhejiang University, Zheda Road, No. 38, Hangzhou 310027 (China)

    2010-01-01

    We report a simple self-assembled synthesis of hierarchical CuO particles with various morphologies such as leaf, shuttle, flower, dandelion, and caddice clew. The morphologies can be easily tailored by adjusting the pH value. The synthesis is based on dehydration and re-crystallization of precursor Cu(OH){sub 2} nanowires. [Cu(NH{sub 3}){sub 4}]{sup 2+} and OH{sup -} in the solutions are considered as the key factors to influence the assembling manner of CuO. The obtained hierarchical CuO particles serve as a good model system for the study as anodes for lithium ion batteries. Various morphologies of CuO particles result in different electrochemical performances of electrodes. Compared to others, dandelion-like and caddice clew-like CuO exhibit reversible discharge capacities of 385 mAh g{sup -1} and 400 mAh g{sup -1} at 0.1 C, 340 mAh g{sup -1} and 374 mAh g{sup -1} at 0.5 C after 50 cycles, respectively. The higher discharge capacities and better cycling performances are attributed to their larger surface area and porosity, leading to better contact between CuO and electrolyte and shorter diffusion length of lithium ions. (author)

  16. Electrochemical detection of copper ions leached from CuO nanoparticles in saline buffers and biological media using a gold wire working electrode

    Science.gov (United States)

    Baldisserri, Carlo; Costa, Anna Luisa

    2016-04-01

    We performed explorative cyclic voltammetry in phosphate-buffered saline buffers, Dulbecco's modified Eagle's medium (DMEM), and fetal bovine serum-added DMEM using Au wire as working electrode, both in the absence and in the presence of known nominal concentrations of Cu2+ ions or 15 nm CuO nanoparticles. Addition of either Cu2+ ions or aqueous suspension of CuO nanoparticles caused a single anodic peak to appear in the double-layer region of all three pristine media. The height of the anodic peak was found to increase in a monotonic fashion vs. Cu2+ concentration in Cu2+-added media, and versus time since CuO addition in CuO-added media. Stepwise addition of glycine to Cu2+-added phosphate-buffered saline buffer caused an increasing cathodic shift of the anodic peak accompanied by decreasing peak currents. Results indicate that preparing Cu2+-free suspensions of CuO nanoparticles in such media is difficult, owing to the presence of leached copper ions. The implications on results of experiments in which CuO nanoparticle-added biological media are used as cell culture substrates are discussed. Literature data on the interactions between Cu2+ ions, dissolved carbon dioxide in aqueous CuO suspensions, and amino acids present in such media are compared to our results.

  17. Reduction of CO2 to low carbon alcohols on CuO FCs/Fe2O3 NTs catalyst with photoelectric dual catalytic interfaces.

    Science.gov (United States)

    Li, Peiqiang; Wang, Huying; Xu, Jinfeng; Jing, Hua; Zhang, Jun; Han, Haixiang; Lu, Fusui

    2013-12-01

    In this paper, the CuO FCs/Fe2O3 NTs catalyst was obtained after Fe2O3 nanotubes (Fe2O3 NTs) were decorated with CuO flower clusters (CuO FCs) by the pulse electrochemical deposition method. The in situ vertically aligned Fe2O3 NTs were prepared on the ferrous substrate by a potentiostatic anodization method. The SEM result showed the volcano-like Fe2O3 NTs were arranged in order and the CuO FCs constituted of flaky CuO distributed on the Fe2O3 NTs surface uniformly. After CuO FCs were loaded on Fe2O3 NTs, the absorption of visible light was enhanced noticeably, and its band gap narrowed to 1.78 eV from 2.03 eV. The conduction band and valence band locating at -0.73 eV and 1.05 eV, respectively were further obtained. In the PEC reduction of CO2 process, methanol and ethanol were two major products identified by chromatography. Their contents reached 1.00 mmol L(-1) cm(-2) and 107.38 μmol L(-1) cm(-2) after 6 h, respectively. This high-efficiency catalyst with photoelectric dual catalytic interfaces has a great guidance and reference significance for CO2 reduction to liquid carbon fuels.

  18. X-ray Emission of Hollow Atoms

    Institute of Scientific and Technical Information of China (English)

    ZhaoYongtao; XiaoGuoqing; ZhangXiaoan; YangZhihu; ChenXimeng; ZhangYanping

    2003-01-01

    We have systematically investigated the X-rays emission of hollow atoms (HA) which formed in the interaction of highly charged ions with a variety of solid surfaces at the atomic physics experimental setup of IMP. The X-ray spectra were measured by Si(Li) detectors with effective energy ranging from 1 keV to 60 keV. The results show that, the X-ray emission from the formed HA is closely correlated with the charge state of the projectile ions, and weakly correlated with the velocity of the projectile ions. For example, it was found that when Ar18+ ions interact with Be-target, the yield of K X-ray with character energy of 3.0 keV is 7.2×10-3 per ion, which is two times and 5 order of magnitude higher than those in the interactions of Ar17+ and Ar16+ ions respectively. When Ar15+ ions interact with the same targets, the Argon K X-ray would be too feeble to be detected. The X-ray yield with single ion in this experiment can be represented by the following equation,

  19. Hollow plasmonic antennas for broadband SERS spectroscopy.

    Science.gov (United States)

    Messina, Gabriele C; Malerba, Mario; Zilio, Pierfrancesco; Miele, Ermanno; Dipalo, Michele; Ferrara, Lorenzo; De Angelis, Francesco

    2015-01-01

    The chemical environment of cells is an extremely complex and multifaceted system that includes many types of proteins, lipids, nucleic acids and various other components. With the final aim of studying these components in detail, we have developed multiband plasmonic antennas, which are suitable for highly sensitive surface enhanced Raman spectroscopy (SERS) and are activated by a wide range of excitation wavelengths. The three-dimensional hollow nanoantennas were produced on an optical resist by a secondary electron lithography approach, generated by fast ion-beam milling on the polymer and then covered with silver in order to obtain plasmonic functionalities. The optical properties of these structures have been studied through finite element analysis simulations that demonstrated the presence of broadband absorption and multiband enhancement due to the unusual geometry of the antennas. The enhancement was confirmed by SERS measurements, which showed a large enhancement of the vibrational features both in the case of resonant excitation and out-of-resonance excitation. Such characteristics indicate that these structures are potential candidates for plasmonic enhancers in multifunctional opto-electronic biosensors.

  20. Reluctance Machine for a Hollow Cylinder Flywheel

    Directory of Open Access Journals (Sweden)

    Magnus Hedlund

    2017-03-01

    Full Text Available A hollow cylinder flywheel rotor with a novel outer rotor switched reluctance machine (SRM mounted on the interior rim is presented, with measurements, numerical analysis and analytical models. Practical experiences from the construction process are also discussed. The flywheel rotor does not have a shaft and spokes and is predicted to store 181 Wh / kg at ultimate tensile strength (UTS according to simulations. The novel SRM is an axial flux machine, chosen due to its robustness and tolerance for high strain. The computed maximum tip speed of the motor at UTS is 1050 m / s . A small-scale proof-of-concept electric machine prototype has been constructed, and the machine inductance has been estimated from measurements of voltage and current and compared against results from analytical models and finite element analysis (FEA. The prototype measurements were used to simulate operation during maximal speed for a comparison towards other high-speed electric machines, in terms of tip speed and power. The mechanical design of the flywheel was performed with an analytical formulation assuming planar stress in concentric shells of orthotropic (unidirectionally circumferentially wound carbon composites. The analytical approach was verified with 3D FEA in terms of stress and strain.

  1. Barium depletion in hollow cathode emitters

    Energy Technology Data Exchange (ETDEWEB)

    Polk, James E., E-mail: james.e.polk@jpl.nasa.gov; Mikellides, Ioannis G.; Katz, Ira [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, California 91109 (United States); Capece, Angela M. [Graduate Aerospace Laboratories, California Institute of Technology, Pasadena, California 91125 (United States)

    2016-01-14

    Dispenser hollow cathodes rely on a consumable supply of Ba released by BaO-CaO-Al{sub 2}O{sub 3} source material in the pores of a tungsten matrix to maintain a low work function surface. The examination of cathode emitters from long duration tests shows deposits of tungsten at the downstream end that appear to block the flow of Ba from the interior. In addition, a numerical model of Ba transport in the cathode plasma indicates that the Ba partial pressure in the insert may exceed the equilibrium vapor pressure of the dominant Ba-producing reaction, and it was postulated previously that this would suppress Ba loss in the upstream part of the emitter. New measurements of the Ba depletion depth from a cathode insert operated for 8200 h reveal that Ba loss is confined to a narrow region near the downstream end, confirming this hypothesis. The Ba transport model was modified to predict the depletion depth with time. A comparison of the calculated and measured depletion depths gives excellent qualitative agreement, and quantitative agreement was obtained assuming an insert temperature 70 °C lower than measured beginning-of-life values.

  2. Hollow silica spheres: synthesis and mechanical properties.

    Science.gov (United States)

    Zhang, Lijuan; D'Acunzi, Maria; Kappl, Michael; Auernhammer, Günter K; Vollmer, Doris; van Kats, Carlos M; van Blaaderen, Alfons

    2009-03-03

    Core-shell polystyrene-silica spheres with diameters of 800 nm and 1.9 microm were synthesized by soap-free emulsion and dispersion polymerization of the polystyrene core, respectively. The polystyrene spheres were used as templates for the synthesis of silica shells of tunable thickness employing the Stöber method [Graf et al. Langmuir 2003, 19, 6693]. The polystyrene template was removed by thermal decomposition at 500 degrees C, resulting in smooth silica shells of well-defined thickness (15-70 nm). The elastic response of these hollow spheres was probed by atomic force microscopy (AFM). A point load was applied to the particle surface through a sharp AFM tip, and successively increased until the shell broke. In agreement with the predictions of shell theory, for small deformations the deformation increased linearly with applied force. The Young's modulus (18 +/- 6 GPa) was about 4 times smaller than that of fused silica [Adachi and Sakka J. Mater. Sci. 1990, 25, 4732] but identical to that of bulk silica spheres (800 nm) synthesized by the Stöber method, indicating that it yields silica of lower density. The minimum force needed to irreversibly deform (buckle) the shell increased quadratically with shell thickness.

  3. CO oxidation over CuO catalysts supported on CeO2-ZrO2 prepared by microwave-assisted co-precipitation:The influence of CuO content

    Institute of Scientific and Technical Information of China (English)

    杨志强; 毛东森; 郭晓明; 卢冠忠

    2014-01-01

    CeO2-ZrO2 mixed oxide (Ce0.6Zr0.4O2) prepared by microwave-assisted heating co-precipitation was used as a support to prepare a series of CuO/Ce0.6Zr0.4O2 catalysts with various CuO contents (0 wt.%-15 wt.%) via the method of incipient-wetness im-pregnation. The obtained CuO/Ce0.6Zr0.4O2 samples were characterized by N2 adsorption, XRD, Raman, TEM and H2-TPR technolo-gies, and their catalytic activities for CO oxidation were investigated. The results showed that the activity of CuO/Ce0.6Zr0.4O2 catalyst was strongly influenced by the content of CuO, and the catalyst with 10 wt.%CuO exhibited the best catalytic activity in CO oxida-tion, which could be attributed to the high dispersion and reducibility of CuO, and high oxygen vacancy concentration in the catalyst.

  4. Effect of the particle size and photon energy on the X-ray attenuation by CuO compounds;Efeito do tamanho de particula e da energia dos fotons na atenuacao de raios X por compostos de CuO

    Energy Technology Data Exchange (ETDEWEB)

    Botelho, Marcel Z. [Centro Universitario Franciscano, Santa Maria, RS (Brazil); Kuenzel, Roseli; Okuno, Emico [Universidade de Sao Paulo (IFUSP), SP (Brazil). Inst. de Fisica; Bergman, Carlos Perez [Universidade Federal do Rio Grande do Sul (EE/UFRGS), Porto Alegre, RS (Brazil). Escola de Engenharia; Levenhagen, Ronaldo S. [Universidade Nove de Julho, Sao Paulo, SP (Brazil); Torunsky, Caroline G. [STAFF - Solucoes em Fisica Medica e Radioprotecao, Santa Maria, RS (Brazil)

    2009-07-01

    In this work the x-ray transmission through microsize CuO and nanosize CuO materials, each one incorporated separately to beeswax, is compared. For comparison purpose, transmission through pure beeswax was also evaluated. The concentration of CuO particles, with a crystallite size in the microsize and nanosize scale, incorporated to beeswax was 5%. The dispersion of the CuO particles in the beeswax was accessed by means of radiographic images provided by a digital mammography equipment. X-ray transmission was evaluated for beams produced by a mammography unit, with a Mo/Mo anode/filter combination and by a conventional x-ray equipment, with a W target. Air kerma values transmitted through material thicknesses between 2 and 12 mm were measured with an ionization chamber. Results shows that the transmission through microsize and nanosize CuO was almost the same for x-ray beams generated at 60 kV tube voltages. However, for x-ray beams generated at 26 kV tube voltages the transmitted air kerma values are lower for the samples with nanosize CuO incorporated to beeswax than those measured for microsize CuO particles incorporated to beeswax. (author)

  5. Spray Deposited Pure and CuO Doped ZnO Thin Films for NH3 Sensing

    Directory of Open Access Journals (Sweden)

    L. A. Patil

    2009-09-01

    Full Text Available Pure and CuO doped ZnO thin films, were prepared using chemical spray deposition. AR grade solutions of zinc nitrate (0.1M and copper chloride were mixed in the proportion of: 99:1, 95:5 and 90:10. The solutions were sprayed on substrate heated at 350 0C temperature to obtain the films. Films were annealed for an hour at 500 0C in air medium. The electrical and gas sensing properties of these films were investigated. The CuO doped ZnO thin films showed better ammonia response as compared to undoped ZnO. The gas response was observed to be increased with increase in proportion of copper chloride in zinc nitrate.

  6. Synthesis and structural characterization of ZnO and CuO nanoparticles supported mesoporous silica SBA-15

    Science.gov (United States)

    El-Nahhal, Issa M.; Salem, Jamil K.; Selmane, Mohamed; Kodeh, Fawzi S.; Ebtihan, Heba A.

    2017-01-01

    Zinc oxide (ZnO) and copper oxide (CuO) nanoparticles were loaded into mesoporous silica SBA-15 by post-synthesis and direct methods. The structural properties were characterized using wide and small angle X-ray diffraction (WXRD & SXRD), X-ray photoelectron spectroscopy (XPS) and N2-adsorption desorption (BET). The WXRD showed that, the loaded zinc and copper oxides were present in crystalline forms (impregnation). The mesoporosity properties of SBA-15 silica were well maintained even after the introduction of metal oxide nanoparticles. BET analysis indicate that the impregnated and condensed ZnO and CuO supported SBA-15 nanocomposites have a lower surface area than that of its parent SBA-15.

  7. Room temperature chemically oxidized La2CuO4+y: Phase separation induced by thermal treatment

    DEFF Research Database (Denmark)

    Rial,C.; Moran, E.; Alario-Franco, M.A.

    1997-01-01

    for this material. The thermogravimetric analysis(TGA) of La2CuO4.103(4) evidences an unexplained two-step mass loss process. Based on this observation, three samples obtained by different thermal treatments of the fully oxidized material were studied by TGA, X-ray diffraction and AC magnetic susceptibility, After...... a short treatment at 433 K, La2CuO4.103(4) undergoes a phase separation into two phases: phase 1, with estimated y(1) = 0.086(4) and T-cl = 30 K, and phase 2, with estimated y(2) = 0.12(1) and T-c2 = 17 K. By increasing the annealing times, phase 2 transforms to phase I and finally disappears. Therefore...

  8. DERIVATION OF A SINGLE-BAND MODEL FOR CUO2 PLANES BY A CELL-PERTURBATION METHOD

    NARCIS (Netherlands)

    JEFFERSON, JH; ESKES, H; FEINER, LF

    1992-01-01

    A cell-perturbation method is developed for CuO2 planes in the cuprate superconductors described by a d-p model. It is shown that a single-band t-t'-J-J' model accurately describes the low-energy physics and how the parameters of this model vary with those of the underlying d-p model. The method is

  9. Chemical Oxidation of La2CuO4 Epitaxial Thin Films Grown by Pulsed Laser Deposition

    Institute of Scientific and Technical Information of China (English)

    WANG Chun-Chang; YAN Yun-Jie; ZHU Jing

    2007-01-01

    Chemical oxidation is used to induce superconductivity in La2CuO4 expitaxial thin films fabricated by pulsed laser deposition technique. Details about the influence of oxidation time on structural, surface morphology, Raman spectra, and electrical properties have been investigated. The results convince that successful uptake of oxygen occurs in the oxidized films, and the content of the inserted oxygen increases with increasing oxidation interval. The possible mechanism for the excess oxygen insertion into the film is also discussed.

  10. Room temperature ferromagnetism in Cu-doped ZnO synthesized from CuO and ZnO nanoparticles

    Science.gov (United States)

    Owens, Frank J.

    2009-11-01

    AC susceptibility and ferromagnetic resonance (FMR) measurements indicate that ZnO doped with Cu by a simple sintering process starting from nanoparticles of ZnO and CuO is ferromagnetic above room temperature. FMR measurements above room temperature indicate the ordering temperature to be above 520 K. The observation supports the recent theoretical calculations of Huang et al. which predict ferromagnetism in copper-doped ZnO.

  11. Is La1.85Y0.15CuO4 an oxygen-doped cuprate superconductor?

    OpenAIRE

    Yu, W.; Liang, B.; Li, P.; Fujino, S.; T. Murakami; Takeuchi, I; Greene, R. L.

    2006-01-01

    We report resistivity, Hall effect, Nernst effect, and magnetoresistance measurements on T'-phase La1.85Y0.15CuO (LYCO) films prepared by pulsed laser deposition under different oxygen conditions. Our results show that superconductivity in LYCO originates from an oxygen-doped Mott-like insulator and not from a weakly correlated, half-filled band metal as proposed previously.

  12. Role of impurity oxygen in superconductivity of "non-doped" T'-(La,RE)2CuO4

    OpenAIRE

    Tsukada, A.; Noda, M; Yamamoto, H; Naito, M.

    2005-01-01

    We have systematically investigated the effect of oxygen nonstoichiometry in a nominally undoped superconductor T'-(La,Y)2CuO4+y. In the experiments, the reduction condition was changed after the sample growth by MBE. The superconductivity is very sensitive to the reduction condition. With systematically increasingly reduced atmospheres, resistivity shows a continuous drop and no discontinuity is observed even until the appearance of superconductivity. The absence of the highly insulating sta...

  13. Polymeric Graphitic Carbon Nitride Doped with CuO Dispersed on Dealuminated Clinoptilolite (CuO/HCP): Synthesis and Characterisation

    OpenAIRE

    Saheed Olalekan Sanni; Omoruyi Gold Idemudia

    2015-01-01

    CuO dispersed on dealuminated clinoptilolite (CuO/HCP) and further doped with polymeric graphitic carbon nitride (CuO/HCP-g-C3N4) was synthesized through 2 facile routes: precipitation method for CuO/HCP and impregnation through ultrasonication method for the hybrid composite material. The hybrid composite material crystalline phase, surface morphology, and structural and thermal properties were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-r...

  14. Effect of O2 pressure on the hydrothermal growth of CuO hierarchical microstructures: characterization and hydrogen adsorption capacity

    Science.gov (United States)

    Roble, M.; Diaz-Droguett, D.

    2017-08-01

    In the present study, the effect of injected O2 pressure to a hydrothermal reactor on the growth, morphology, structure and hydrogen adsorption properties of CuO hierarchical microstructures was investigated. The synthesis consisted of a simple one-step hydrothermal reaction using copper chloride and aqueous ammonia. Hydrothermal reactions were carried at 200 °C at reaction times of 1 and 12 h injecting at the beginning of the synthesis O2 pressures of 0, 30 or 60 bar. The samples were characterized by SEM and EDS for morphological and chemical information, XRD for determination of crystalline phases, lattice parameters and crystallinity grade using Rietveld refinement. Specific surface area was determined using BET method from nitrogen adsorption/desorption isotherm measurements. Hydrogen adsorption capacities at 20 °C were studied for key samples using the quartz crystal microbalance technique under gas exposure pressures between 3 and 100 Torr. It was found that the samples were of monoclinic CuO phase consisting mainly of sphere-like hierarchical microstructures of different average sizes assembled by sheets. The effect of the reactor pressure was mainly seen on average size of the CuO microstructures due to changes in the growth rate, specifically during the first stages of the hydrothermal reaction. Reactor pressure induced changes on the crystallinity of the samples were determined but no correlation was stated. Hydrogen adsorption capacities of studied samples measured at 100 Torr ranged from 0.27 to 0.6 wt%, indicating a good performance as compared with other reported values. Oxygen deficiency in CuO can influence on the hydrogen adsorption capacity.

  15. Comparison of Antibacterial Effects of ZnO and CuO Nanoparticles Coated Brackets against Streptococcus Mutans

    Directory of Open Access Journals (Sweden)

    Baratali Ramazanzadeh

    2015-09-01

    Full Text Available Statement of the Problem: During the orthodontic treatment, microbial plaques may accumulate around the brackets and cause caries, especially in high-risk patients. Finding ways to eliminate this microbial plaque seems to be essential. Purpose: The aim of this study was to compare the antibacterial effects of nano copper oxide (CuO and nano zinc oxide (ZnO coated brackets against Streptococcus mutans (S.mutans in order to decrease the risk of caries around the orthodontic brackets during the treatment. Materials and Method: Sixty brackets were coated with nanoparticles of ZnO (n=20, CuO (n=20 and CuO-ZnO (n=20. Twelve uncoated brackets constituted the control group. The brackets were bonded to the crowns of extracted premolars, sterilized and prepared for antimicrobial tests (S.mutans ATCC35668. The samples taken after 0, 2, 4, 6 and 24 hours were cultured on agar plates. Colonies were counted 24 hours after incubation. One-way ANOVA and Tukey tests were used for statistical analysis. Results: In CuO and CuO-ZnO coated brackets, no colony growth was seen after two hours. Between 0-6 hours, the mean colony counts were not significantly different between the ZnO and the control group (p>0.05. During 6-24 hours, the growth of S.mutans was significantly reduced by ZnO nanoparticles in comparison with the control group (p< 0.001. However, these bacteria were not totally eliminated. Conclusion: CuO and ZnO-CuO nanoparticles coated brackets have better antimicrobial effect on S.mutans than ZnO coated brackets.

  16. Direct fabrication of cerium oxide hollow nanofibers by electrospinning

    Institute of Scientific and Technical Information of China (English)

    CUI Qizheng; DONG Xiangting; WANG Jinxian; LI Mei

    2008-01-01

    Electrospinning technique was used to fabricate PVP/Ce(NO3)3 composite mierofibers. Different morphological CeO2 nanofibers were obtained by calcination of the PVP/Ce(NO3)3 composite microfibers and were characterized by scanning electron microscopy (SEM),Transmission electron microscopy (TEM), X-ray diffraction (XRD), thermal gravimetric and differential thermal analysis (TG-DTA), and (FHR). SEM micrographs indicated that the surface of the composite fibers was smooth and became coarse with the increase of calcination temperatures. The diameters of CeO2 hollow nanofibers (300 nm at 600 ℃ and 600 nm at 800 ℃) were smaller than those of PVP/Ce(NO3)3 composite fibers (1-2 μm). CeO2 hollow nanofibers were obtained at 600 ℃ and CeO2 hollow and porous nanofibers formed by nanoparti-ties were obtained at 800 ℃. The length of the CeO2 hollow nanofibers was greater than 50 μm. XRD analysis revealed that the composite microfibers were amorphous in structure and CeO2 nanofibers were cubic in structure with space groupO5H-FM3m when calcination tem-peratures were 600-800 ℃. TG-DTA and FTIR revealed that the formation of CeO2 nanofibers was largely influenced by the calcination temperatures. Possible formation mechanism of CeO2 hollow nanofibers was proposed.

  17. KE-Rod Initial Velocity of Hollow Cylindrical Charge

    Directory of Open Access Journals (Sweden)

    Wang Shushan

    2011-01-01

    Full Text Available KE-rod warhead is a kind of forward interception warhead. To control the KE-rods to disperse uniformly, the hollow cylindrical charge is applied. Initial velocity is crucial to KE-rods distribution and the coordination between the fuze and the warhead. Therefore, based on the classical Gurney formula of cylindrical charge and tabulate interlayer charge, a mathematical model for calculating the KE-rod initial velocity of hollow cylindrical charge has been deduced based on certain assumptions, of which the basis theory is energy and momentum conservation. To validate this deduced equation, high-speed photography and metal-pass target experimental methods were applied simultaneously to test the initial velocity of designed KE-rod warhead. Testing results clearly indicate that the calculated results of the derived mathematical model coincides with the experimental  results, and with the increase in hollow radius, the calculated results become much closer to the experimental results. But the calculated results of classical Gurney formula are far above the experimental results, and the relative error increases with increase in the hollow diameter. The derived mathematical model with satisfactory accuracy is applicable to calculate the KE-rod initial velocity of hollow cylindrical charge in engineering applications.Defence Science Journal, 2011, 61(1, pp.25-29, DOI:http://dx.doi.org/10.14429/dsj.61.72

  18. Hollow proppants and a process for their manufacture

    Science.gov (United States)

    Jones, Arfon H.; Cutler, Raymond A.

    1985-01-01

    Hollow, fine-grained ceramic proppants are less expensive and improve fracture control when compared to conventional proppants (dense alumina, mullite, bauxite, zirconia, etc.). Hollow proppants of the present invention have been fabricated by spray drying, followed by sintering in order to obtain a dense case and a hollow core. These proppants generally have high sphericity and roundness (Krumbein sphericity and roundness greater than 0.8), have diameters on average between 2250 and 125 .mu.m, depending on proppant size required, and have strength equal to or greater than that of sand. The hollow core, the size of which can be controlled, permits better fracture control in hydraulic fracturing treatments since the proppant can be transported in lower viscosity fluids. Hollow proppants produced at the same cost/weight as conventional proppants also provide for lower costs, since less weight is required to fill the same volume. The fine-grained (preferably less than 5 .mu.m in diameter) ceramic case provides the strength necessary to withstand closure stresses and prevent crushing.

  19. Synthesis of biocompatible hybrid magnetic hollow spheres based on encapsulation strategy.

    Science.gov (United States)

    Ha, Wei; Wu, Hao; Ma, Yuan; Fan, Min-Min; Peng, Shu-Lin; Ding, Li-Sheng; Zhang, Sheng; Li, Bang-Jing

    2013-01-30

    A kind of novel magnetic hollow spheres was prepared by encapsulating magnetofluid into polymeric hollow spheres. Polymeric hollow nanospheres were constructed by self-assembly of rod-coil complexes, in which the rod-like segments were formed by inclusion of α-cyclodextrins (α-CD) and grafting poly(ethylene glycol) (PEG) chains of chitosan-graft-PEG (CS-g-PEG). Structural characteristics of CS-g-PEG/α-CD hollow spheres were investigated in detail by NMR, XRD, TEM, etc. Furthermore, those hollow spheres showed a pH responsive property which induced a considerable change of their radius. Magnetofluid was physically entrapped into the empty domain while hollow spheres were formed, it was found that the hollow spheres can encapsulate large quantities of magnetofluid and the encapsulated magnetofluid still possess magnetic responsiveness properties. We expect that this strategy may be served as a novel and more straightforward approach to obtain magnetic hollow spheres for biomedical application.

  20. Flexible electronics-compatible non-enzymatic glucose sensing via transparent CuO nanowire networks on PET films

    Science.gov (United States)

    Bell, Caroline; Nammari, Abdullah; Uttamchandani, Pranay; Rai, Amit; Shah, Pujan; Moore, Arden L.

    2017-06-01

    Diabetic individuals need simple, accurate, and cost effective means by which to independently assess their glucose levels in a non-invasive way. In this work, a sensor based on randomly oriented CuO nanowire networks supported by a polyethylene terephthalate thin film is evaluated as a flexible, transparent, non-enzymatic glucose sensing system analogous to those envisioned for future wearable diagnostic devices. The amperometric sensing characteristics of this type of device architecture are evaluated both before and after bending, with the system’s glucose response, sensitivity, lower limit of detection, and effect of applied bias being experimentally determined. The obtained data shows that the sensor is capable of measuring changes in glucose levels within a physiologically relevant range (0-12 mM glucose) and at lower limits of detection (0.05 mM glucose at +0.6 V bias) consistent with patient tears and saliva. Unlike existing studies utilizing a conductive backing layer or macroscopic electrode setup, this sensor demonstrates a percolation network-like trend of current versus glucose concentration. In this implementation, controlling the architectural details of the CuO nanowire network could conceivably allow the sensor’s sensitivity and optimal sensing range to be tuned. Overall, this work shows that integrating CuO nanowires into a sensor architecture compatible with transparent, flexible electronics is a promising avenue to realizing next generation wearable non-enzymatic glucose diagnostic devices.

  1. Probing inter- and intrachain Zhang-Rice excitons in Li2CuO2 and determining their binding energy

    Science.gov (United States)

    Monney, Claude; Bisogni, Valentina; Zhou, Ke-Jin; Kraus, Roberto; Strocov, Vladimir N.; Behr, Günter; Drechsler, Stefan-Ludwig; Rosner, Helge; Johnston, Steve; Geck, Jochen; Schmitt, Thorsten

    2016-10-01

    Cuprate materials, such as those hosting high-temperature superconductivity, represent a famous class of materials where the correlations between the strongly entangled charges and spins produce complex phase diagrams. Several years ago, the Zhang-Rice singlet was proposed as a natural quasiparticle in hole-doped cuprates. The occurrence and binding energy of this quasiparticle, consisting of a pair of bound holes with antiparallel spins on the same CuO4 plaquette, depends on the local electronic interactions, which are fundamental quantities for understanding the physics of the cuprates. Here, we employ state-of-the-art resonant inelastic x-ray scattering (RIXS) to probe the correlated physics of the CuO4 plaquettes in the quasi-one-dimensional chain cuprate Li2CuO2 . By tuning the incoming photon energy to the O K edge, we populate bound states related to the Zhang-Rice quasiparticles in the RIXS process. Both intra- and interchain Zhang-Rice singlets are observed and their occurrence is shown to depend on the nearest-neighbor spin-spin correlations, which are readily probed in this experiment. We also extract the binding energy of the Zhang-Rice singlet and identify the Zhang-Rice triplet excitation in the RIXS spectra.

  2. Anisotropy of hopping magnetoresistance in antiferromagnetic La sub 2 CuO sub 4 sub + sub d single crystals

    CERN Document Server

    Belevtsev, B I; Panfilov, A S; Braude, I S; Bondarenko, A V

    2003-01-01

    The results on anisotropy of hopping conductivity (5-295 K) and magnetoresistance (MR) (5-55 K) of La sub 2 CuO sub 4 sub + sub d antiferromagnetic single crystals with T sub N approx 188 K are reported. The resistance was measured by the Montgomery technique for different combinations of transport current and magnetic field directions with respect to the crystallographic axes. In the case where the field and transport current were parallel to the CuO sub 2 layers, a transition (at T approx 20 K) from negative MR to positive MR was detected with a rise of temperature. In the fields perpendicular to the CuO sub 2 layers, only negative MR was observed. The nature of the positive MR is discussed. It is shown that the effect is more likely attributable to the orbital motion of charge carriers rather than to the interaction of their spins with the magnetic surroundings. The correlation is found between the value, magnetic-field and temperature behavior of the positive MR and the known Shklovsky-Efros model based o...

  3. An observation of further splitting of the new fine-structure in magneto-optical spectra of CuO

    Science.gov (United States)

    Masumi, Taizo; Imanaka, Yasutaka; Takehana, Kanji; Yamaguchi, Hiroyuki; Kido, Giyuu

    2001-04-01

    Regarding CuO first in 1998 (Masumi et al., J. Phys. Soc. Japan 67 (1998) 67), we reported an observation of the new fine structures near the optical absorption edge below 90 K. They consist of two sharp peaks A and B at EA=1.57511 eV and EB=1.58097 eV, respectively, at T=7 K. Two peaks emerge only below 90 K and their integrated intensity remarkably grows below 90 and 60 K. Here, we have started a magneto-optical study to seek further natures of these fine structures in the absorption edge of CuO by applying high magnetic fields up to B=25 T with a resolution of δE=1.24 meV, Δ ν=1 cm -1. Peaks A and B exhibit rather little variations up to 10 T. Above 12 T, however, there starts to emerge a potential splitting in the peak A, whereas peak B simply indicates a broadening. Finally, we clearly recognize new finer structures due to splitting in peak A at B=25 T. These results reveal a possibility of an existence of further peculiar magnetic characters in CuO even at lower temperature side besides the antiferromagnetic transitions at TN1=213 K and TN2=230 K.

  4. Electrochemical fluorination of La(2)CuO(4): a mild "chimie douce" route to superconducting oxyfluoride materials.

    Science.gov (United States)

    Delville, M H; Barbut, D; Wattiaux, A; Bassat, J M; Ménétrier, M; Labrugère, C; Grenier, J C; Etourneau, J

    2009-08-17

    The fluorination of La(2)CuO(4) was achieved for the first time under normal conditions of pressure and temperature (1 MPa and 298 K) via electrochemical insertion in organic fluorinated electrolytes and led to lanthanum oxyfluorides of general formula La(2)CuO(4)F(x). Analyses showed that, underneath a very thin layer of LaF(3) (a few atomic layers), fluorine is effectively inserted in the material's structure. The fluorination strongly modifies the lanthanum environment, whereas very little modification is observed on copper, suggesting an insertion in the La(2)O(2) blocks of the structure. In all cases, fluorine insertion breaks the translation symmetry and introduces a long-distance disorder, as shown by electron spin resonance. These results highlight the efficiency of electrochemistry as a new "chimie douce" type fluorination technique for solid-state materials. Performed at room temperature, it additionally does not require any specific experimental care. The choice of the electrolytic medium is crucial with regard to the fluorine insertion rate as well as the material deterioration. Successful application of this technique to the well-known La(2)CuO(4) material provides a basis for further syntheses from other oxides.

  5. Electrical Conductivity of Sintered Chromia Mixed with TiO2,CuO and Mn-Oxides

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The electrical conductivity of sintered Cr2O3 mixed with 2% and 5% (in molar fraction) TiO2 or CuO was investigated in the temperature range 500~900℃ in air and in Ar/4 vol. pct H2 atmospheres. The effect of different Mn-oxides on the electrical conductivity of Cr2O3 was also studied under the same conditions.From the conductivity measurements it is established that additions of TiO2 change the defect structure of Cr2O3 and the effect of TiO2 on the electrical conductivity is controlled by TiO2 concentration as well as temperature and O2 partial pressure of the surrounding atmosphere. The conductivity of Cr2O3 increased in air and decreased in the Ar/H2 atmosphere by CuO additions. The effect of CuO was discussed with possible changes in the defect concentration in Cr2O3. Mixing of Cr2O3 with different Mn-oxides at the same Mn to metal atom fraction decreased the conductivity in air and in Ar/H2 atmospheres. No clear correlation between the spinel fraction and the changes in conductivity could be found.

  6. Electron-beam irradiation induced transformation of Cu2(OH)3NO3 nanoflakes into nanocrystalline CuO.

    Science.gov (United States)

    Padhi, S K; Gottapu, S N; Krishna, M Ghanashyam

    2016-06-07

    The transmission electron microscope electron-beam (TEM e-beam) as a material modification tool has been demonstrated. The material modification is realised in the high-resolution TEM mode (largest condenser aperture, 150 μm, and 200 nm spot size) at a 200 keV beam energy. The Cu2(OH)3NO3 (CHN) nanoflakes used in this study were microwave solution processed that were layered single crystals and radiation sensitive. The single domain CHN flakes disintegrate into a large number of individual CuO crystallites within a 90 s span of time. The sequential bright-field, dark-field, and selected area electron diffraction modes were employed to record the evolved morphology, microstructural changes, and structural transformation that validate CHN modification. High-resolution transmission electron microscopy imaging of e-beam irradiated regions unambiguously supports the growth of CuO nanoparticles (11.8(3.2) nm in diameter). This study demonstrates e-beam irradiation induced CHN depletion, subsequent nucleation and growth of nanocrystalline CuO regions well embedded in the parent burnt porous matrix which can be useful for miniaturized sensing applications. NaBH4 induced room temperature reduction of CHN to elemental Cu and its printability on paper was also demonstrated.

  7. Co{sub 2}-Y ferrite modified by CuO addition applied to a terrestrial broadcasting antenna

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, Shigeo, E-mail: s502wd@yamaguchi-u.ac.jp; Nishijima, Kaihei; Satoh, Hiroshi; Yamamoto, Setsuo

    2015-04-01

    The addition of CuO to hexagonal Y-type ferrites, Ba{sub 2}Co{sub 2}Fe{sub 12}O{sub 22} was investigated as a way to modify the magnetic properties of these materials. It was found that a 0.6 wt% CuO addition led to a real part of complex permeability of 2.7 and a loss factor of 0.05 even at a frequency of 1 GHz. The doped ferrite was applied in a terrestrial broadcasting (ISDB) antenna in the 470–750 MHz frequency range. A ferrite antenna with a dimension of 3 mm×3 mm×30 mm dimensions with helical printed conductor patterns was designed and fabricated. It exhibited excellent average gain of −0.5 dBi at a center frequency of ~600 MHz and showed a wide bandwidth of 160 MHz under a gain level of −5 dBi. - Highlights: • The magnetic properties of Co{sub 2}-Y hexagonal ferrite was modified by the CuO addition. • A low tan δ of 0.05 along with a permeability of 2.7 at 1 GHz was achieved. • The ferrite was applied to a terrestrial broadcasting antenna with a helical winding. • A wide bandwidth of 160 MHz and average gain of −0.5 dBi at 600 MHz were demonstrated.

  8. Hollow clay tile wall program summary report

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, R.C.; Jones, W.D. [Gilbert/Commonwealth, Inc., Oak Ridge, TN (United States); Beavers, J.E. [MS Technology, Inc. (United States)

    1995-07-30

    Many of the Y-12 Plant buildings, constructed during the 1940s and 1950s, consist of steel ed concrete framing infilled with hollow clay tile (HCT). The infill was intended to provide for building enclosure and was not designed to have vertical or lateral load-carrying capacity. During the late 1970s and early 1980s, seismic and wind evaluations were performed on many of these buildings in conjunction with the preparation of a site-wide safety analysis report. This analytical work, based on the best available methodology, considered lateral load-carrying capacity of the HCT infill on the basis of building code allowable shear values. In parallel with the analysis effort, DOE initiated a program to develop natural phenomena capacity and performance criteria for existing buildings, but these criteria did not specify guidelines for determining the lateral force capacity of frames infilled with HCT. The evaluation of infills was, therefore, based on the provisions for the design of unreinforced masonry as outlined in standard masonry codes. When the results of the seismic and wind evaluations were compared with the new criteria, the projected building capacities fell short of the requirements. Apparently, if the buildings were to meet the new criteria, many millions of dollars would be required for building upgrades. Because the upgrade costs were significant, the assumptions and approaches used in the analyses were reevaluated. Four issues were identified: (1) Once the infilled walls cracked, what capacity (nonlinear response), if any, would the walls have to resist earthquake or wind loads applied in the plane of the infill (in-plane)? (2) Would the infilled walls remain within the steel or reinforced concrete framing when subjected to earthquake or high wind loads applied perpendicular to the infill (out-of-plane)? (3) What was the actual shear capacity of the HCT infill? (4) Was modeling the HCT infill as a shear wall the best approach?

  9. Family Bovidae (Hollow-horned Ruminants)

    Science.gov (United States)

    Groves, Colin P.; Leslie, David M.; Huffman, Brent A.; Valdez, Raul; Habibi, Khushal; Weinberg, Paul; Burton, James; Jarman, Peter; Robichaud, William

    2015-01-01

    Probably the single most eye-catching aspect of the current volume is the explosion of species recognized in the family Bovidae (Hollow-horned Ruminants). In 2005, the third edition of Mammal Species of the World listed 143 species in 50 genera of Bovidae. That list, prepared by the late Peter Grubb, was somewhat traditional and provisional, as he was engaged with his long-time colleague, Colin Groves, in a substantial revision of ungulate taxonomy. Their work, which will be published later this year, is the culmination of years of study of this important and wide-ranging family by these two venerable authorities. Colin Groves is the lead author for Bovidae in this volume of HMW, and in it we recognize all 279 species in 54 genera that are documented in his and Peter Grubb’s ground-breaking work.At the root of this expanded number of recognized species is our changing view of the modern species concept. Like a growing number of taxonomists, Groves favors a phylogenetic species concept, which he defines as the smallest population or aggregation of populations that has fixed heritable differences from other such populations or aggregations. This is in contrast to the traditional biological species concept, which requires reproductive isolation between such populations. The difficulty in determining that reproductive isolation led to an underrepresentation of the number of species in many groups. Clearly there remain problems in determining which differences between populations are heritable, and the system used here undoubtedly will continue to be tweaked as our understanding grows. For now, this greatly expanded version of Bovidae species limits seems the best answer. One of the goals of HMW is to provide an up-to-date summary of the conservation status for every species of mammal, and this expanded species concept better enables us to explore the true conservation situation of each.

  10. Magnetic domains and surface effects in hollow maghemite nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Cabot, Andreu; Alivisatos, A. Paul; Puntes, Victor; Balcells, Lluis; Iglesias, Oscar; Labarta, Amilcar

    2008-09-30

    In the present work, we investigate the magnetic properties of ferrimagnetic and non-interacting maghemite hollow nanoparticles obtained by the Kirkendall effect. From the experimental characterization of their magnetic behavior, we find that polycrystalline hollow maghemite nanoparticles exhibit low blocked-to-superparamagnetic transition temperatures, small magnetic moments, significant coercivities and irreversibility fields, and no magnetic saturation on external magnetic fields up to 5 T. These results are interpreted in terms of the microstructural parameters characterizing the maghemite shells by means of atomistic Monte Carlo simulations of an individual spherical shell. The model comprises strongly interacting crystallographic domains arranged in a spherical shell with random orientations and anisotropy axis. The Monte Carlo simulation allows discernment between the influence of the polycrystalline structure and its hollow geometry, while revealing the magnetic domain arranggement in the different temperataure regimes.

  11. Enhancement of acoustical performance of hollow tube sound absorber

    Science.gov (United States)

    Putra, Azma; Khair, Fazlin Abd; Nor, Mohd Jailani Mohd

    2016-03-01

    This paper presents acoustical performance of hollow structures utilizing the recycled lollipop sticks as acoustic absorbers. The hollow cross section of the structures is arranged facing the sound incidence. The effects of different length of the sticks and air gap on the acoustical performance are studied. The absorption coefficient was measured using impedance tube method. Here it is found that improvement on the sound absorption performance is achieved by introducing natural kapok fiber inserted into the void between the hollow structures. Results reveal that by inserting the kapok fibers, both the absorption bandwidth and the absorption coefficient increase. For test sample backed by a rigid surface, best performance of sound absorption is obtained for fibers inserted at the front and back sides of the absorber. And for the case of test sample with air gap, this is achieved for fibers introduced only at the back side of the absorber.

  12. Pulsar average waveforms and hollow cone beam models

    Science.gov (United States)

    Backer, D. C.

    1975-01-01

    An analysis of pulsar average waveforms at radio frequencies from 40 MHz to 15 GHz is presented. The analysis is based on the hypothesis that the observer sees one cut of a hollow-cone beam pattern and that stationary properties of the emission vary over the cone. The distributions of apparent cone widths for different observed forms of the average pulse profiles (single, double/unresolved, double/resolved, triple and multiple) are in modest agreement with a model of a circular hollow-cone beam with random observer-spin axis orientation, a random cone axis-spin axis alignment, and a small range of physical hollow-cone parameters for all objects.

  13. Preparation of Hollow Silica Microspheres via Poly(N-isopropylacrylamide)

    Institute of Scientific and Technical Information of China (English)

    Mo-zhen Wang; Yu-chen Chen; Xue-ping Ge; Xue-wu Ge

    2012-01-01

    Core-shell structured SiO2/poly(N-isopropylacrylamide) (SiO2/PNIPAM) microspheres were successfully fabricated through hydrolysis and condensation reaction of tertraethyl orthosilicate (TEOS) on the surface of PNIPAM template at 50 ℃.The PNIPAM template can be easily removed by water at room temperature so that SiO2 hollow microspheres were finally obtained.The transmission electron microscope and scanning electron microscope observations indicated that SiO2 hollow microspheres with an average diameter of 150 nm can be formed only if there are enough concentration of PNIPAM and TEOS,and the hydrolysis time of TEOS.FTIR analysis showed that part of PNIPAM remained on the wall of SiO2 because of the strong interaction between PNIPAM and silica.This work provides a clean and efficient way to prepare hollow microspheres.

  14. Hollow volcanic tumulus caves of Kilauea Caldera, Hawaii County, Hawaii

    Directory of Open Access Journals (Sweden)

    William R. Halliday

    1998-01-01

    Full Text Available In addition to lava tube caves with commonly noted features, sizable subcrustal spaces of several types exist on the floor of Kilauea Caldera. Most of these are formed by drainage of partially stabilized volcanic structures enlarged or formed by injection of very fluid lava beneath a plastic crust. Most conspicuous are hollow tumuli, possibly first described by Walker in 1991. Walker mapped and described the outer chamber of Tumulus E-I Cave. Further exploration has revealed that it has a hyperthermic inner room beneath an adjoining tumulus with no connection evident on the surface. Two lengthy, sinuous hollow tumuli also are present in this part of the caldera. These findings support Walkers conclusions that hollow tumuli provide valuable insights into tumulus-forming mechanisms, and provide information about the processes of emplacement of pahoehoe sheet flows.

  15. Growth of ZSM-5 crystals within hollow β-zeolite

    Institute of Scientific and Technical Information of China (English)

    Qing Hu Zeng; Xiang Bai; Jia Jun Zheng; Jia Qi Chen; Rui Feng Li

    2011-01-01

    A zeolite composite composed of ZSM-5 and β-zeolites has been synthesized by a procedure of the nucleation and crystallization of ZSM-5 zeolite in the hollow β-zeolite. The property of β-zeolite crystals with aluminum-poor interior and aluminum-rich outer rim results in silicon extraction favorably in the aluminum-poor bulk rather than the aluminum-rich external surface. Subsequently, alkaline treatment of β-zeolite crystals during the second-step synthesis leads to a preferential dissolution of the aluminum-poor center and the formation of hollow β-zeolite crystals. ZSM-5 zeolite crystals are therefore embedded and grown within the hollow β-zeolite. The catalytic activities of Co-Hβ, Co-HZSM-5 and Co-HZSM-5/BEA are investigated during the reaction of methane catalytic reduction NO in the presence of O2.

  16. Hollow-core fibers for high power pulse delivery

    DEFF Research Database (Denmark)

    Michieletto, Mattia; Lyngsø, Jens K.; Jakobsen, Christian;

    2016-01-01

    We investigate hollow-core fibers for fiber delivery of high power ultrashort laser pulses. We use numerical techniques to design an anti-resonant hollow-core fiber having one layer of non-touching tubes to determine which structures offer the best optical properties for the delivery of high power...... picosecond pulses. A novel fiber with 7 tubes and a core of 30 mu m was fabricated and it is here described and characterized, showing remarkable low loss, low bend loss, and good mode quality. Its optical properties are compared to both a 10 mu m and a 18 mu m core diameter photonic band gap hollow......-core fiber. The three fibers are characterized experimentally for the delivery of 22 picosecond pulses at 1032nm. We demonstrate flexible, diffraction limited beam delivery with output average powers in excess of 70W. (C) 2016 Optical Society of America...

  17. Enhancement of acoustical performance of hollow tube sound absorber

    Energy Technology Data Exchange (ETDEWEB)

    Putra, Azma, E-mail: azma.putra@utem.edu.my; Khair, Fazlin Abd, E-mail: fazlinabdkhair@student.utem.edu.my; Nor, Mohd Jailani Mohd, E-mail: jai@utem.edu.my [Centre for Advanced Research on Energy, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal Melaka 76100 Malaysia (Malaysia)

    2016-03-29

    This paper presents acoustical performance of hollow structures utilizing the recycled lollipop sticks as acoustic absorbers. The hollow cross section of the structures is arranged facing the sound incidence. The effects of different length of the sticks and air gap on the acoustical performance are studied. The absorption coefficient was measured using impedance tube method. Here it is found that improvement on the sound absorption performance is achieved by introducing natural kapok fiber inserted into the void between the hollow structures. Results reveal that by inserting the kapok fibers, both the absorption bandwidth and the absorption coefficient increase. For test sample backed by a rigid surface, best performance of sound absorption is obtained for fibers inserted at the front and back sides of the absorber. And for the case of test sample with air gap, this is achieved for fibers introduced only at the back side of the absorber.

  18. Pressure effects in hollow and solid iron oxide nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Silva, N.J.O., E-mail: nunojoao@ua.pt [Departamento de Física and CICECO, Universidade de Aveiro, 3810-193 Aveiro (Portugal); Saisho, S.; Mito, M. [Faculty of Engineering, Kyushu Institute of Technology, Kitakyushu 804-8550 (Japan); Millán, A.; Palacio, F. [Instituto de Ciencia de Materiales de Aragón, CSIC - Universidad de Zaragoza. Departamento de Física de la Materia Condensada, Facultad de Ciencias, 50009 Zaragoza (Spain); Cabot, A. [Universitat de Barcelona and Catalonia Energy Research Institute, Barcelona (Spain); Iglesias, Ò.; Labarta, A. [Departament de Física Fonamental, Universitat de Barcelona and Institut de Nanociència i Nanotecnologia, Universitat de Barcelona, Martí i Franquès 1, 08028 Barcelona (Spain)

    2013-06-15

    We report a study on the pressure response of the anisotropy energy of hollow and solid maghemite nanoparticles. The differences between the maghemite samples are understood in terms of size, magnetic anisotropy and shape of the particles. In particular, the differences between hollow and solid samples are due to the different shape of the nanoparticles and by comparing both pressure responses it is possible to conclude that the shell has a larger pressure response when compared to the core. - Highlights: ► Study of the pressure response of core and shell magnetic anisotropy. ► Contrast between hollow and solid maghemite nanoparticles. ► Disentanglement of nanoparticles core and shell magnetic properties.

  19. Optical properties of end-sealed hollow fibers.

    Science.gov (United States)

    Mohri, Shintaro; Kasai, Takao; Abe, Yukio; Shi, Yi-Wei; Matsuura, Yuji; Miyagi, Mitsunobu

    2002-03-01

    We propose sealing techniques for medical hollow fibers to protect the inner surface of fibers from debris or water that scatters from targets. First, hollow fibers are sealed with a film of polymer that is easily formed by use of a dipping technique. The transmission loss of 20-microm-thick sealing film was 0.2 dB for Er:YAG laser light, and the maximum energy that is available for the film was 180 mJ. Second, a sealed glass cap was applied to the output end of hollow fiber. The silica-glass cap with a wall thickness of 400 microm shows a transmission loss of 0.5 dB and was not damaged by radiation of 400-mJ energy pulses.

  20. Hollow polycarbonate fiber for Er:YAG laser light delivery.

    Science.gov (United States)

    Nakazawa, Masayuki; Shi, Yi-Wei; Matsuura, Yuji; Iwai, Katsumasa; Miyagi, Mitsunobu

    2006-05-15

    We developed hollow fibers with polycarbonate (PC) capillaries for use as a supporting tube. The PC capillaries were prepared by using a glass-drawing technique. Hollow PC fibers are safer and more flexible than hollow glass fibers because no fragments are released when the fibers are broken in various applications. Inner coating layers of silver and cyclic olefin polymer (COP) enhanced the reflection rate at the Er:YAG laser light wavelength. Using these fibers, we attained low loss for Er:YAG laser light transmission. By adjusting the drawing temperature in the fabrication of the PC capillaries, we created a smooth inner surface and uniform PC capillaries. We also demonstrated low-loss properties for visible pilot beams.

  1. Failure Mechanisms of Hollow Fiber Supported Ionic Liquid Membranes.

    Science.gov (United States)

    Zeh, Matthew; Wickramanayake, Shan; Hopkinson, David

    2016-03-23

    Hollow fiber supported ionic liquid membranes (SILMs) were tested using the bubble point method to investigate potential failure modes, including the maximum transmembrane pressure before loss of the ionic liquid from the support. Porous hollow fiber supports were fabricated with different pore morphologies using Matrimid(®) and Torlon(®) as the polymeric material and 1-hexyl-3-methylimidalzolium bis(trifluoromethylsulfonyl)imide ([C₆mim][Tf₂N]) as the ionic liquid (IL) component. Hollow fiber SILMs were tested for their maximum pressure before failure, with pressure applied either from the bore side or shell side. It was found that the membranes exhibited one or more of three different modes of failure when pressurized: liquid loss (occurring at the bubble point), rupture, and collapse.

  2. Preparation and antibacterial activities of hollow silica-Ag spheres.

    Science.gov (United States)

    Lin, Lin; Zhang, Haifang; Cui, Haiying; Xu, Mingqiang; Cao, Shunsheng; Zheng, Guanghong; Dong, Mingdong

    2013-01-01

    Hollow silica spheres with round mesoporous shells were synthesized by core-shell template method, using monodispersed cationic polystyrene particles as core, and TEOS (tetraethoxysilane) as the silica source to form shell. After calcination at 550°C, uniform spheres with a thin shell of silica and hollow interior structures. Transmission electron microscopy results showed that the size of the spheres is about 700 nm in diameter with narrow distribution. In addition, the spheres have a high surface area of 183 m(2)/g. The spheres were subsequently used as silver-loading substrates and the silver loaded spheres were tested in antimicrobial study against gram negative bacteria Eschrichia coli in vitro. The hollow silica-Ag spheres proved significantly higher antibacterial efficacy against E. coli as compared to that of the common silica-Ag particles.

  3. Thermal shock in a circumferentially cracked hollow cylinder with cladding

    Science.gov (United States)

    Nied, H. F.

    1984-01-01

    An theoretical analysis is presented which demonstrates the effect of cladding on the thermal resistance of a circumferentially cracked hollow cylinder. The cladding is assumed to be bonded to the inner wall of the hollow cylinder. The axisymmetric circumferential crack may be either embedded in the cylinder wall or may be an edge crack which passes through the clad and opens into the inner wall of the hollow cylinder. The problem is formulated mathematically and a solution is found which is in the form of a single integral equation. The integral equation is solved numerically and yields estimates of transient temperature distributions, thermal stresses in the uncracked cylinder, and stress intensity factors as a function of time for various cladding thickness to cylinder wall thickness ratios. It is shown that yielding of the clad under certain conditions can result in a reduction in the magnitude of the stress intensity factor for the crack tip in the elastic base material.

  4. Fabrication of Polyacrylonitrile Hollow Fiber Membranes from Ionic Liquid Solutions

    KAUST Repository

    Kim, Dooli

    2015-10-08

    The interest in green processes and products has increased to reduce the negative impact of many industrial processes to the environment. Solvents, which play a crucial role in the fabrication of membranes, need to be replaced by sustainable and less toxic solvent alternatives for commonly used polymers. The purpose of this study is the fabrication of greener hollow fiber membranes based on polyacrylonitrile (PAN), substituting dimethylformamide (DMF) by less toxic mixtures of ionic liquids (IL) and dimethylsulfoxide (DMSO). A thermodynamic analysis was conducted, estimating the Gibbs free energy of mixing to find the most convenient solution compositions. Hollow fiber membranes were manufactured and optimized. As a result, a uniform pattern and high porosity were observed in the inner surface of the membranes prepared from the ionic liquid solutions. The membranes were coated with a polyamide layer by interfacial polymerization the hollow fiber membranes were applied in forward osmosis experiments by using sucrose solutions as draw solution.

  5. Proton-proton hollowness at the LHC from inverse scattering

    CERN Document Server

    Arriola, Enrique Ruiz

    2016-01-01

    It is shown that the parametrizations of the NN scattering data at the LHC collision energies indicate a hollow in the inelasticity profile, with less absorption for head-on collisions than at a non-zero impact parameter. We show that some qualitatively unnoticed features may be unveiled by a judicious application of the inverse scattering problem in the eikonal approximation and within an optical potential model interpretation. The hollowness effect is magnified within a 3D picture of the optical potential, and will presumably be enhanced at higher energies. However, it sets in at much smaller energies than at the LHC. The hollowness feature of the experimental data precludes models, where inelasticity is obtained by folding of uncorrelated nucleon structures.

  6. Hollow nanoparticle cathode materials for sodium electrochemical cells and batteries

    Energy Technology Data Exchange (ETDEWEB)

    Shevchenko, Elena; Rajh, Tijana; Johnson, Christopher S.; Koo, Bonil

    2016-07-12

    A cathode comprises, in its discharged state, a layer of hollow .gamma.-Fe.sub.2O.sub.3 nanoparticles disposed between two layers of carbon nanotubes, and preferably including a metallic current collector in contact with one of the layers of carbon nanotubes. Individual particles of the hollow .gamma.-Fe.sub.2O.sub.3 nanoparticles comprise a crystalline shell of .gamma.-Fe.sub.2O.sub.3 including cation vacancies within the crystal structure of the shell (i.e., iron vacancies of anywhere between 3% to 90%, and preferably 44 to 77% of available octahedral iron sites). Sodium ions are intercalated within at least some of the cation vacancies within the crystalline shell of the hollow .gamma.-Fe.sub.2O.sub.3 nanoparticles.

  7. Fire resistance of extruded hollow-core slabs

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl; Sørensen, Lars Schiøtt; Giuliani, Luisa

    2017-01-01

    Purpose – Prefabricated extruded hollow-core slabs are preferred building components for floor structures in several countries. It is therefore important to be able to document the fire resistance of these slabs proving fulfilment of standard fire resistance requirements of 60 and 120 min found...... in most national building regulations. The paper aims to present a detailed analysis of the mechanisms responsible for the loss of loadbearing capacity of hollow-core slabs when exposed to fire. Design/methodology/approach – Furthermore, it compares theoretica calculation and assessment according...... to the structural codes with data derived from a standard fire test and from a thorough examination of the comprehensive test documentation available on fire exposed hollow-core slabs. Findings – Mechanisms for loss of load-bearing capacity are clarified, and evidence of the fire resistance is found. Originality...

  8. Fire resistance of extruded hollow-core slabs

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl; Giuliani, Luisa; Sørensen, Lars Schiøtt

    2016-01-01

    Prefabricated extruded hollow-core slabs are preferred building components for floor structures in several countries. It is therefore important to be able to document the fire resistance of these slabs proving fulfilment of standard fire resistance requirements of 60- and 120 minutes found in most...... national building regulations. The paper presents a detailed analysis of the mechanisms responsible for the loss of load-bearing capacity of hollow-core slabs when exposed to fire. Furthermore, it compares theoretical calculation and assessment according to the structural codes with data derived from...... a standard fire test and from a thorough examination of the comprehensive test documentation available on fire exposed hollow-core slabs. Mechanisms for loss of load-bearing capacity are clarified, and evidence of the fire resistance is found. For the first time the mechanisms responsible for loss of load...

  9. CexTi1-xO2 Mixed Oxides Supported CuO Catalyst for NO Reduction by CO

    Institute of Scientific and Technical Information of China (English)

    楼莉萍; 蒋晓原; 陈英旭; 吕光烈; 周仁贤; 郑小明

    2003-01-01

    CexTi1-xO2 mixed oxides of different mole ratios (x=0, 0.1, 0.2~0.9, 1.0) were prepared by co-precipitation of TiCl4 with Ce(NO3)3 and then loaded with different amounts of CuO. The effects of CuO on NO+CO reaction were investigated, and the structure and reductive properties of various CuO/CexTi1-xO2 were characterized by the methodologies of BET, TPR and XRD. The results show that different Ce/Ti mole ratios and calcination temperatures induce changes of structure and reductive properties of the CexTi1-xO2 mixed oxides. When x=0.1~0.5, amorphous CeTi2O6 phase mainly forms at 650 ℃ compared to the formation of CeTi2O6 which crystallizes at 800 ℃. When x>0.6, some TiO2 enters the CeO2 lattice and a CeO2-TiO2 solid solution is formed. The activity of 6%CuO/CexTi1-xO2 calcined at 650 ℃ is largely affected by the x values, which is the highest when x=0.3, 0.4 and 0.9. The NO conversion reaches 70% at a reaction temperature of 150 ℃. By comparison, the x values have little effect on the activity of 6%CuO/CexTi1-xO2 calcined at 800 ℃. There are strong interactions between CuO and CeTi2O6, I.e., formation of the CeTi2O6 phase shifts the CuO reduction peak temperature from 380 to 200 ℃, and CuO, in turn, shifts the CeTi2O6 reduction peak temperature from 600 to 300 ℃.

  10. Electron Doping by Charge Transfer at LaFeO 3 /Sm 2 CuO 4 Epitaxial Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Bruno, Flavio Y. [Universidad Complutense, Spain; Schmidt, R [Universidad Complutense de Madrid, Spain; Varela, Maria [UCM, Dept Fis Aplicada 3, Madrid, Spain; Garcia-Barriocanal, Javier [Universidad Complutense, Spain; Rivera-Calzada, Alberto [Universidad Complutense, Spain; Cuellar, F. [Universidad Complutense de Madrid, Spain; Leon, Carlos [Universidad Complutense de Madrid, Spain; Thakur, P. [European Synchrotron Radiation Facility (ESRF); Cezar, J. C. [European Synchrotron Radiation Facility (ESRF); Brookes, N. B. [European Synchrotron Radiation Facility (ESRF); Garcia-Hernandez, M [Instituto de Ciencia de Materiales de Madrid (ICMM); Dagotto, Elbio R [ORNL; Pennycook, Stephen J [ORNL; Santamaria, J. [Universidad Complutense, Spain

    2013-01-01

    The breakdown of the lattice translational invariance symmetry that occurs at complex oxide interfaces may profoundly modify their electronic structure, leading to interfacial states with properties drastically different from those of the superlattice individual components. The appearance of a conducting two dimensional (2D) electron gas at the interface between two insulating oxides and induced magnetism in a non-magnetic material are just two among many fascinating examples. [ 1 8 ] One of the key factors underlying novel properties is the modifi cation of the doping and orbital occupancy near those interfaces, which may result from charge transfer processes. [ 3 , 9 11 ] If materials used in heterostructures have different work functions, a non-equilibrium situation will be created at the interface and charge will be transferred until the chemical potential levels off. [ 12 ] The use of such phenomena to modify doping in heterostructures has been proposed theoretically as a new route to avoid the quenched disorder that inevitably accompanies the chemical doping. At the interface between a Mott insulating parent compound of the high critical temperature superconductor (HTSC) family and a suitable material that would act as the charge donor, electron doped phases could be stabilized which would eventually turn metallic and perhaps superconducting. [ 12 , 13 ] Such charge transfer processes have been observed at interfaces involving copper oxides such as La 0.7 Ca 0.3 MnO 3 / YBa 2 Cu 3 O 7 , [ 14 ] La 2 x Sr x CuO 4 /La 2 CuO 4 [ 15 ] and SrTi 1 x Nb x O 3 / Sm 2 CuO 4 . [ 16 ] While a novel 2D superconducting state was found at the La 2-x Sr x CuO 4 /La 2 CuO 4 interface, [ 17 ] the effect of doping by charge transfer could not be examined in the other two cases due to the detrimental effect on the YBa 2 Cu 3 O 7 superconductivity of the spin polarized electrons from La 0.7 Ca 0.3 MnO 3 in one case and due to the conducting nature of the SrTi 1 x Nb x O 3 in the

  11. Mercury's low-reflectance material: Constraints from hollows

    Science.gov (United States)

    Thomas, Rebecca J.; Hynek, Brian M.; Rothery, David A.; Conway, Susan J.

    2016-10-01

    Unusually low reflectance material, within which depressions known as hollows appear to be actively forming by sublimation, is a major component of Mercury's surface geology. The observation that this material is exhumed from depth by large impacts has the intriguing implication that the planet's lower crust or upper mantle contains a significant volatile-rich, low-reflectance layer, the composition of which will be key for developing our understanding of Mercury's geochemical evolution and bulk composition. Hollows provide a means by which the composition of both the volatile and non-volatile components of the low-reflectance material (LRM) can be constrained, as they result from the loss of the volatile component, and any remaining lag can be expected to be formed of the non-volatile component. However, previous work has approached this by investigating the spectral character of hollows as a whole, including that of bright deposits surrounding the hollows, a unit of uncertain character. Here we use high-resolution multispectral images, obtained as the MESSENGER spacecraft approached Mercury at lower altitudes in the latter part of its mission, to investigate reflectance spectra of inactive hollow floors where sublimation appears to have ceased, and compare this to those of the bright surrounding products and the parent material. This analysis reveals that the final lag after hollow-formation has a flatter spectral slope than that of any other unit on the planet and reflectance approaching that of more space-weathered parent material. This indicates firstly that the volatile material lost has a steeper spectral slope and higher reflectance than the parent material, consistent with (Ca,Mg) sulfides, and secondly, that the low-reflectance component of LRM is non-volatile and may be graphite.

  12. One-step self-assembled synthesis of CuO with tunable hierarchical structures and their electrocatalytic properties for nitrite oxidation in aqueous media.

    Science.gov (United States)

    Zhao, Youcheng; Song, Xinyu; Yin, Zhilei; Song, Qisheng

    2013-04-15

    Controlled synthesis of CuO with various hierarchical structures consisting of self-organized nanoparticles is realized by using n-octylamine (OLA) as a structure inducing agent via a facile hydrothermal synthetic method. The growth and assemblage of CuO can be finely tuned by selecting the preparative parameters. In particular, it is found that the degree of the hierarchical organization can be modulated by simply changing the amount of the n-octylamine and CuO nanoparticles exhibit self-assembled two-dimensional (2D) sheet-like, three-dimensional (3D) disk-like and bowknot-like architectures, respectively. In the present case, OLA serves as a capping surfactant that can modulate growth of CuO nanocrystals via hydrophobic forces between the OLA molecules. CuO nanoparticles can be self-assembled into different complex architectures depending on the strength of hydrophobic forces. Hierarchical sphere-like CuO assembled from nanorods can also be easily fabricated by adjusting the starting NaOH to CuCl2 volume ratio, in which OLA serves not only as the structure-directing agent, but also as a weak base agent to produce hydroxyl anions. The electrochemical performances of the as-synthesized different products for sensing nitrite oxidation are evaluated. The results reveal that the electrocatalytic activity is related to the secondary nanostructures. Compared to the others, the bowknot-shaped and sphere-shaped CuO products exhibit excellent electrocatalytic activity toward nitrite oxidation and fast current response in nitrite sensing because of their peculiar hierarchical structures with high BET surface areas and well-ordered pores.

  13. Effect of alginate on the aggregation kinetics of copper oxide nanoparticles (CuO NPs): bridging interaction and hetero-aggregation induced by Ca(2.).

    Science.gov (United States)

    Miao, Lingzhan; Wang, Chao; Hou, Jun; Wang, Peifang; Ao, Yanhui; Li, Yi; Lv, Bowen; Yang, Yangyang; You, Guoxiang; Xu, Yi

    2016-06-01

    The stability of CuO nanoparticles (NPs) is expected to play a key role in the environmental risk assessment of nanotoxicity in aquatic systems. In this study, the effect of alginate (model polysaccharides) on the stability of CuO NPs in various environmentally relevant ionic strength conditions was investigated by using time-resolved dynamic light scattering. Significant aggregation of CuO NPs was observed in the presence of both monovalent and divalent cations. The critical coagulation concentrations (CCC) were 54.5 and 2.9 mM for NaNO3 and Ca(NO3)2, respectively. The presence of alginate slowed nano-CuO aggregation rates over the entire NaNO3 concentration range due to the combined electrostatic and steric effect. High concentrations of Ca(2+) (>6 mM) resulted in stronger adsorption of alginate onto CuO NPs; however, enhanced aggregation of CuO NPs occurred simultaneously under the same conditions. Spectroscopic analysis revealed that the bridging interaction of alginate with Ca(2+) might be an important mechanism for the enhanced aggregation. Furthermore, significant coagulation of the alginate molecules was observed in solutions of high Ca(2+) concentrations, indicating a hetero-aggregation mechanism between the alginate-covered CuO NPs and the unabsorbed alginate. These results suggested a different aggregation mechanism of NPs might co-exist in aqueous systems enriched with natural organic matter, which should be taken into consideration in future studies. Graphical abstract Hetero-aggregation mechanism of CuO nanoparticles and alginate under high concentration of Ca(2.)

  14. Synthesis and their enhanced photoelectrochemical performance of ZnO nanoparticle-loaded CuO dandelion heterostructures under solar light

    Science.gov (United States)

    Dong, Guanying; Du, Bin; Liu, Lei; Zhang, Weiwei; Liang, Yujie; Shi, Honglong; Wang, Wenzhong

    2017-03-01

    Here we report an easy and large-scale synthesis of three-dimensional (3D) ZnO nanoparticle-loaded CuO dandelion (denoted as n-ZnO/p-CuO nanoparticle/dandelion) heterostructures and their photoelectrochemical (PEC) water splitting under simulated solar light illumination. CuO dandelions were fabricated by a facile and cost-effective chemical strategy, in which the ribbon-like CuO nanoplates were first formed and then assembled into dandelion-like architectures. ZnO nanoparticle-loaded CuO dandelion heterostructures were fabricated by calcining Zn(Ac)2-loaded CuO dandelions. High resolution transmission electron microscope (HRTEM) studies demonstrate that intimate p-n junction is built between p-CuO and n-ZnO interface. The n-ZnO/p-CuO nanoparticle/dandelion photoelectrodes exhibit significant improvement in PEC water splitting to CuO dandelion photoelectrodes. The correlation between photocurrents and different loading contents of ZnO nanoparticles (NPs) is studied in which the n-ZnO/p-CuO nanoparticle/dandelion heterostructures with loading 4.6 wt% ZnO NPs show higher photocathodic current. The efficient separation of the photogenerated electrons and holes driven by the intimate p-n junction between p-type CuO and n-type ZnO interface is mainly contributed to the enhanced photoanode current. The achieved results in the present study offer a very useful strategy for designing p-n junction photoelectrodes for efficiency and low-cost PEC cells for clean solar hydrogen production.

  15. Long and short term impacts of CuO, Ag and CeO2 nanoparticles on anaerobic digestion of municipal waste activated sludge.

    Science.gov (United States)

    Ünşar, E Kökdemir; Çığgın, A S; Erdem, A; Perendeci, N A

    2016-02-01

    In this study, long and short term inhibition impacts of Ag, CuO and CeO2 nanoparticles (NPs) on anaerobic digestion (AD) of waste activated sludge (WAS) were investigated. CuO NPs were detected as the most toxic NPs on AD. As the CuO NP concentration increased from 5 to 1000 mg per gTS, an increase in the inhibition of AD from 5.8 to 84.0% was observed. EC50 values of short and long term inhibitions were calculated as 224.2 mgCuO per gTS and 215.1 mgCuO per gTS, respectively. Ag and CeO2 NPs did not cause drastic impacts on AD as compared to CuO NPs. In the long term test, Ag NPs created 12.1% decrease and CeO2 NPs caused 9.2% increase in the methane production from WAS at the highest dosage. FISH imaging also revealed that the abundance of Archaea in raw WAS was similar in short and long term tests carried out with WAS containing Ag and CeO2 NPs. On the other hand, CuO NPs caused inhibition of Archaea in the long term test. Digestion kinetics of WAS containing Ag, CeO2, CuO NPs were also evaluated with Gompertz, Logistic, Transference and First Order models. The hydrolysis rate constant (kH) for each concentration of Ag and CeO2 NPs and the raw WAS was 0.027745 d(-1) while the kH of WAS containing high concentrations of CuO NPs was found to be 0.001610 d(-1).

  16. A density functional theory study of partial oxidation of propylene on Cu{sub 2}O(0 0 1) and CuO(0 0 1) surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Düzenli, Derya [Chemical Engineering Department, Middle East Technical University, 06800 Ankara (Turkey); Mineral Analysis and Technology, General Directorate of Mineral Research and Exploration, 06800 Ankara (Turkey); Atmaca, Deniz Onay; Gezer, Miray Gülbiter [Chemical Engineering Department, Middle East Technical University, 06800 Ankara (Turkey); Onal, Isik, E-mail: ional@metu.edu.tr [Chemical Engineering Department, Middle East Technical University, 06800 Ankara (Turkey)

    2015-11-15

    Graphical abstract: - Highlights: • Propylene epoxidation mechanism on Cu{sub 2}O(0 0 1) and CuO(0 0 1) surfaces is investigated using DFT method. • Acrolein is found to be a thermodynamically more favorable product for both surfaces especially over CuO surface. • The more basic property of the surface oxygen increases the probability of acrolein formation over CuO(0 0 1) surface. - Abstract: This work theoretically investigates propylene epoxidation reaction on Cu{sub 2}O(0 0 1) and CuO(0 0 1) surfaces using periodical DFT method to determine the active copper species within the reaction mechanism. The transition states and energy profiles are calculated for the formation of surface intermediates such as oxametallopropylene (OMP) over Cu{sub 2}O(0 0 1) and oxygen bridging (OB) over CuO(0 0 1) and allylic H-stripping reaction (AHS) over both surfaces as well as for formation of products. Propylene oxide (PO) and acetone are obtained through OMP and OB surface intermediates and acrolein generation is observed through allylic H-stripping reaction (AHS). The calculations revealed that the corresponding surface intermediates for epoxidation reaction need to overcome an activation barrier of 13 kcal/mol over CuO surface whereas they occur without an energy barrier over Cu{sub 2}O surface indicating the higher activity of Cu{sup +} species. Acrolein is also found to be a thermodynamically more favorable product for both surfaces especially over CuO surface due to the presence of more surface oxygen atoms on which the basicity has been evaluated by the adsorption of sulfur dioxide. This indicates that the lattice oxygen inherent in both surface types does not participate in PO production.

  17. Long-term effects of CuO nanoparticles on the surface physicochemical properties of biofilms in a sequencing batch biofilm reactor.

    Science.gov (United States)

    Hou, Jun; You, Guoxiang; Xu, Yi; Wang, Chao; Wang, Peifang; Miao, Lingzhan; Li, Yi; Ao, Yanhui; Lv, Bowen; Yang, Yangyang

    2016-11-01

    In this study, we examined the long-term effects of copper oxide nanoparticles (CuO NPs) on the production and properties of EPS and the resulting variations in surface physicochemical characteristics of biofilms in a sequencing batch biofilm reactor. After exposure to 50 mg/L CuO NPs for 45 days, the protein (PRO) and polysaccharide (PS) contents in loosely bound EPS (LB-EPS) decreased as the production of LB-EPS decreased from 34.4 to 30 mg TOC/g EPS. However, the production of tightly bound EPS (TB-EPS) increased by 16.47 % as the PRO and PS contents increased. The content of humic-like substances (HS) increased significantly, becoming the predominant constituent in EPS with the presence of 50 mg/L CuO NPs. Furthermore, the results of three-dimensional excitation-emission fluorescence spectra confirmed the various changes in terms of the LB-EPS and TB-EPS contents after exposure to CuO NPs. Fourier transform infrared spectroscopy showed that the -OH and -NH2 groups of proteins in EPS were involved in the reaction with CuO NPs. Moreover, the chronic exposure to CuO NPs induced a negative impact on the flocculating efficiency of EPS and on the hydrophobicity and aggregation ability of microbial cells. The PRO/PS ratios of different EPS fractions were consistent with their hydrophobicities (R (2) >0.98) and bioflocculating efficiencies (R (2) >0.95); however, there was no correlation with aggregation ability. Additionally, the presence of bovine serum albumin (BSA) prevented the physical contact between CuO NPs and EPS as a result of NP aggregation and electrostatic repulsion.

  18. Novel CuCr{sub 2}O{sub 4} embedded CuO nanocomposites for efficient photodegradation of organic dyes

    Energy Technology Data Exchange (ETDEWEB)

    Mageshwari, K. [Department of Electronics and Computer Engineering, Hanyang University, Seoul 133-791 (Korea, Republic of); PG & Research Department of Physics, Kongunadu Arts and Science College, Coimbatore 641029, Tamilnadu (India); Sathyamoorthy, R., E-mail: rsathya59@gmail.com [PG & Research Department of Physics, Kongunadu Arts and Science College, Coimbatore 641029, Tamilnadu (India); Lee, Jeong Yong [IBS, Center for Nanomaterials and Chemical Reactions, Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Park, Jinsub, E-mail: jinsubpark@hanyang.ac.kr [Department of Electronics and Computer Engineering, Hanyang University, Seoul 133-791 (Korea, Republic of)

    2015-10-30

    Graphical abstract: - Highlights: • Novel CuO–CuCr{sub 2}O{sub 4} nanocomposites synthesized by reflux condensation method. • Methyl orange and methylene blue dye degradation studied under UV light irradiation. • Nanocomposites characterized by XRD, FESEM, TEM, EDX, UV–vis DRS and PL. • CuCr{sub 2}O{sub 4} loading effectively enhanced the catalytic activity of CuO. - Abstract: Novel photocatalyst based on CuO–CuCr{sub 2}O{sub 4} nanocomposites was synthesized for different Cr{sup 3+} concentration by reflux condensation method, and their photocatalytic activity was evaluated by monitoring the photodegradation of methyl orange (MO) and methylene blue dyes (MB) under UV light irradiation. Phase evolution by X-ray diffraction showed monoclinic CuO and tetragonal CuCr{sub 2}O{sub 4} as the components of the prepared nanocomposites. Morphological analysis by scanning electron microscope and transmission electron microscope revealed that the incorporation of Cr{sup 3+} in CuO lattice alters the morphology of CuO from microsphere to cluster shape. Photoluminescence spectra of CuO–CuCr{sub 2}O{sub 4} nanocomposites exhibited reduced PL emissions compared to pure CuO, indicating the low recombination rate of photogenerated electrons and holes. As expected, the CuCr{sub 2}O{sub 4} loaded CuO showed enhanced photocatalytic activity for MO and MB dyes, and the kinetic studies suggest that the degradation follows pseudo-first-order kinetics. The enhanced photocatalytic activity of CuO–CuCr{sub 2}O{sub 4} nanocomposites can be attributed to the presence of CuCr{sub 2}O{sub 4} as an electron acceptor, which improves the effective charge separation in CuO.

  19. An alternative technique for hollowing maxillary complete denture

    Directory of Open Access Journals (Sweden)

    Suryakant C Deogade

    2016-01-01

    Full Text Available Extreme resorption of edentulous maxilla may cause difficulty during fabrication of a maxillary complete denture. Increased inter-ridge distance often creates a clinical problem due to heavy-weighted maxillary prosthesis. This article elaborates an alternative approach for hollowing a maxillary complete denture. It utilizes a clear template of the trial denture facilitating the creation of a gelatin cavity form. This hollowing ensures the even thickness of both denture base resins for structural integrity and reduces the heaviness of the denture.

  20. A microring multimode laser using hollow polymer optical fibre

    Indian Academy of Sciences (India)

    M Kailasnath; V P N Nampoori; P Radhakrishnan

    2010-11-01

    We report the observation of multimode laser operation at wavelengths corresponding to whispering-gallery modes from a freestanding microring cavity based on rhodamine B dye-doped PMMA hollow optical fibre. Cylindrical microcavities with diameters 155, 340 and 615 m were fabricated from a dye-doped hollow polymer optical fibre preform. An average mode spacing of 0.17 nm was observed for the 340 m cavity. This shows that the laser mode intensity distribution is concentrated on the outer edge of the cavity.